Scissor-type knife significantly improves self-completion rate of colorectal endoscopic submucosal dissection: Single-center prospective randomized trial.

PubMed

Yamashina, Takeshi; Takeuchi, Yoji; Nagai, Kengo; Matsuura, Noriko; Ito, Takashi; Fujii, Mototsugu; Hanaoka, Noboru; Higashino, Koji; Uedo, Noriya; Ishihara, Ryu; Iishi, Hiroyasu

2017-05-01

Colorectal endoscopic submucosal dissection (C-ESD) is recognized as a difficult procedure. Recently, scissors-type knives were launched to reduce the difficulty of C-ESD. The aim of this study was to evaluate the efficacy and safety of the combined use of a scissors-type knife and a needle-type knife with a water-jet function (WJ needle-knife) for C-ESD compared with using the WJ needle-knife alone. This was a prospective randomized controlled trial in a referral center. Eighty-five patients with superficial colorectal neoplasms were enrolled and randomly assigned to undergo C-ESD using a WJ needle-knife alone (Flush group) or a scissor-type knife-supported WJ needle-knife (SB Jr group). Procedures were conducted by two supervised residents. Primary endpoint was self-completion rate by the residents. Self-completion rate was 67% in the SB Jr group, which was significantly higher than that in the Flush group (39%, P = 0.01). Even after exclusion of four patients in the SB Jr group in whom C-ESD was completed using the WJ needle-knife alone, the self-completion rate was significantly higher (63% vs 39%; P = 0.03). Median procedure time among the self-completion cases did not differ significantly between the two groups (59 vs 51 min; P = 0.14). No fatal adverse events were observed in either group. In this single-center phase II trial, scissor-type knife significantly improved residents' self-completion rate for C-ESD, with no increase in procedure time or adverse events. A multicenter trial would be warranted to confirm the validity of the present study. © 2016 Japan Gastroenterological Endoscopy Society.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ullmann, J. L.; Kawano, T.; Baramsai, B.

The cross section for neutron capture in the continuum region has been difficult to calculate accurately. Previous results for 238 U show that including an M 1 scissors-mode contribution to the photon strength function resulted in very good agreement between calculation and measurement. Our paper extends that analysis to 234 , 236 U by using γ -ray spectra measured with the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos Neutron Science Center to constrain the photon strength function used to calculate the capture cross section. Calculations using a strong scissors-mode contribution reproduced the measured γ -ray spectramore » and were in excellent agreement with the reported cross sections for all three isotopes.« less

Scissors stab wound to the cervical spinal cord at the craniocervical junction.

PubMed

Zhang, Xiao-Yong; Yang, Ying-Ming

2016-06-01

Stab wounds resulting in spinal cord injury of the craniocervical junction are rare. A scissors stab wound to the cervical spinal cord has been reported only once in the literature. This paper aimed to report a case of Brown-Séquard-plus syndrome in an 8-year-old boy secondary to a scissors stab wound at the craniocervical junction. Case report and review of the literature. Case report of an 8-year-old boy accidentally stabbed in the neck by scissors, which were thrown as a dart. The case study of an 8-year-old boy who was hospitalized because of a scissors stab wound at the craniocervical junction. The patient developed Brown-Séquard-plus syndrome on the left side of the body. Magnetic resonance imaging revealed a laceration of the spinal cord at the craniocervical junction with cerebrospinal fluid leakage. Careful cleansing and interrupted sutures of the wounds were performed to prevent cerebrospinal fluid leakage. Rehabilitation therapy was performed 2 days later. A follow-up examination revealed complete recovery of the neurologic deficit 8 months post-injury. Treatment of scissors stab wounds to the cervical spinal cord, whether conservative management or thorough surgical exploration, should be individualized based on history, examination, and imaging. As shown in this case report, despite conservative management, complete recovery, which was unexpected, was attributed to the initial mild laceration of the spinal cord and ipsilateral spinal cord functional compensation. Copyright © 2016 Elsevier Inc. All rights reserved.

Constraining the calculation of U 234 , 236 , 238 ( n , γ ) cross sections with measurements of the γ -ray spectra at the DANCE facility

DOE PAGES

Ullmann, J. L.; Kawano, T.; Baramsai, B.; ...

2017-08-31

The cross section for neutron capture in the continuum region has been difficult to calculate accurately. Previous results for 238 U show that including an M 1 scissors-mode contribution to the photon strength function resulted in very good agreement between calculation and measurement. Our paper extends that analysis to 234 , 236 U by using γ -ray spectra measured with the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos Neutron Science Center to constrain the photon strength function used to calculate the capture cross section. Calculations using a strong scissors-mode contribution reproduced the measured γ -ray spectramore » and were in excellent agreement with the reported cross sections for all three isotopes.« less

Constraining the calculation of 234,236,238U (n ,γ ) cross sections with measurements of the γ -ray spectra at the DANCE facility

NASA Astrophysics Data System (ADS)

Ullmann, J. L.; Kawano, T.; Baramsai, B.; Bredeweg, T. A.; Couture, A.; Haight, R. C.; Jandel, M.; O'Donnell, J. M.; Rundberg, R. S.; Vieira, D. J.; Wilhelmy, J. B.; Krtička, M.; Becker, J. A.; Chyzh, A.; Wu, C. Y.; Mitchell, G. E.

2017-08-01

The cross section for neutron capture in the continuum region has been difficult to calculate accurately. Previous results for 238U show that including an M 1 scissors-mode contribution to the photon strength function resulted in very good agreement between calculation and measurement. This paper extends that analysis to U,236234 by using γ -ray spectra measured with the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos Neutron Science Center to constrain the photon strength function used to calculate the capture cross section. Calculations using a strong scissors-mode contribution reproduced the measured γ -ray spectra and were in excellent agreement with the reported cross sections for all three isotopes.

Learning the rules of the rock-paper-scissors game: chimpanzees versus children.

PubMed

Gao, Jie; Su, Yanjie; Tomonaga, Masaki; Matsuzawa, Tetsuro

2018-01-01

The present study aimed to investigate whether chimpanzees (Pan troglodytes) could learn a transverse pattern by being trained in the rules of the rock-paper-scissors game in which "paper" beats "rock," "rock" beats "scissors," and "scissors" beats "paper." Additionally, this study compared the learning processes between chimpanzees and children. Seven chimpanzees were tested using a computer-controlled task. They were trained to choose the stronger of two options according to the game rules. The chimpanzees first engaged in the paper-rock sessions until they reached the learning criterion. Subsequently, they engaged in the rock-scissors and scissors-paper sessions, before progressing to sessions with all three pairs mixed. Five of the seven chimpanzees completed training after a mean of 307 sessions, which indicates that they learned the circular pattern. The chimpanzees required more scissors-paper sessions (14.29 ± 6.89), the third learnt pair, than paper-rock (1.71 ± 0.18) and rock-scissors (3.14 ± 0.70) sessions, suggesting they had difficulty finalizing the circularity. The chimpanzees then received generalization tests using new stimuli, which they learned quickly. A similar procedure was performed with children (35-71 months, n = 38) who needed the same number of trials for all three pairs during single-paired sessions. Their accuracy during the mixed-pair sessions improved with age and was better than chance from 50 months of age, which indicates that the ability to solve the transverse patterning problem might develop at around 4 years of age. The present findings show that chimpanzees were able to learn the task but had difficulties with circularity, whereas children learned the task more easily and developed the relevant ability at approximately 4 years of age. Furthermore, the chimpanzees' performance during the mixed-pair sessions was similar to that of 4-year-old children during the corresponding stage of training.

Scissors Modes and Spin Excitations in Light Nuclei Including ΔN=2 Excitations: Behaviour of 8Be and 10Be

NASA Astrophysics Data System (ADS)

Fayache, M. S.; Sharma, S. Shelley; Zamick, L.

1996-10-01

Shell model calculations are performed for magnetic dipole excitations in8Be and10Be, first with a quadrupole-quadrupole interaction (Q·Q) and then with a realistic interaction. The calculations are performed both in a 0pspace and in a large space which includes all 2ℏωexcitations. In the 0pwithQ·Qwe have an analytic expression for the energies of all states. In this limit we find that in10Be theL=1S=0 scissors mode with isospinT=1 is degenerate with that ofT=2. By projection from an intrinsic state we can obtain simple expressions forB(M1) to the scissors modes in8Be and10Be. We plot cumulative sums for energy-weighted isovector orbital transitions fromJ=0+ground states to the 1+excited states. These have the structure of a low-energy plateau and a steep rise to a high-energy plateau. The relative magnitudes of these plateaux are discussed. By comparing8Be and10Be we find that contrary to the behaviour in heavy deformed nuclei,B(M1)orbitalis not proportional toB(E2). On the other hand, a sum rule which relatesB(M1) to the difference (B(E2)isoscalar-B(E2)isovector) succeeds in describing the difference in behaviours in the two nuclei. The results forQ·Qand the realistic interactions are compared, as are the results in the 0pspace and the large (0p+2ℏω) space. The Wigner supermultiplet scheme is a very useful guide in analyzing the shell model results.

Scissor bite in a young patient treated with an orthodontic-orthopedic device. A case report.

PubMed

Favero, V; Sbricoli, L; Favero, L

2013-06-01

Scissor bite is a rare malocclusion that often leads to minor facial asymmetry. An orthodontic and orthopaedic correction is advisable in young patients to prevent subsequent temporomandibular diseases requesting maxillofacial intervention. In this case report a 8-year-old girl in mixed dentition with unilateral left scissor bite was treated with a modified Rapid Palatal Expander. To modify an overexpanded maxilla (width 39 mm measured between both upper first molars) the device was used to close rather than to expand, without need of patient compliance. Orthodontic correction was then completed with traditional bracketing. Results were tangible (width 36 mm) and remained stable even for at least 2 years after retention. This original device has proved to be useful in this kind of situations and can be easily applied to young patient to correct such malocclusions.

Hydrogen bonds in betaine-acid (1:1) crystals revealed by Raman and 13C chemical shift tensors

NASA Astrophysics Data System (ADS)

Ilczyszyn, Marek; Ilczyszyn, Maria M.

2017-06-01

H-bonds of five betaine-acid (1:1) crystals are considered by analysis of tensors based on the Raman scissoring mode and 13C chemical shift of the betaine -CO1O2- carboxylate group. The leading structural factor in these systems is the strongest H-bond linking the betaine and the acidic moieties, (O1⋯H-O)com. The Raman and NMR tensors are strongly related to its character and to the R(O1⋯O)com distance. Very high molecular polarizability variation due to the scissoring vibration was found for the betaine-selenious acid crystal. The probable reason is modest network of H-bonds in this case and relatively high proton polarizability of these bonds.

21 CFR 880.6820 - Medical disposable scissors.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Medical disposable scissors. 880.6820 Section 880...) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous Devices § 880.6820 Medical disposable scissors. (a) Identification. Medical disposable scissors are...

21 CFR 880.6820 - Medical disposable scissors.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical disposable scissors. 880.6820 Section 880...) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous Devices § 880.6820 Medical disposable scissors. (a) Identification. Medical disposable scissors are...

Ergonomic design and evaluation of new surgical scissors.

PubMed

Shimomura, Yoshihiro; Shirakawa, Hironori; Sekine, Masashi; Katsuura, Tetsuo; Igarashi, Tatsuo

2015-01-01

The purpose of this study is to design a new surgical scissors handle and determine its effectiveness with various usability indices. A new scissors handle was designed that retains the professional grip but has the shapes of the eye rings modified to fit the thumb and ring finger and finger rests for the index and little finger. The newly designed scissors and traditional scissors were compared by electromyography, subjective evaluation and task performance in experiments using cutting and peeling tasks. The newly designed scissors reduced muscle load in both hand during cutting by the closing action, and reduced the muscle load in the left hand during peeling by the opening action through active use of the right hand. In evaluation by surgeons, task performance improved in addition to the decrease in muscle load. The newly designed scissors used in this study demonstrated high usability. A new scissors handle was designed that has the eye rings modified to fit the thumb and ring finger. The newly designed scissors reduced muscle load and enabled active use of the right hand. In evaluation by surgeons, task performance improved in addition to the decrease in muscle load.

Magnetic dipole excitations of 50Cr

NASA Astrophysics Data System (ADS)

Pai, H.; Beck, T.; Beller, J.; Beyer, R.; Bhike, M.; Derya, V.; Gayer, U.; Isaak, J.; Krishichayan, Kvasil, J.; Löher, B.; Nesterenko, V. O.; Pietralla, N.; Martínez-Pinedo, G.; Mertes, L.; Ponomarev, V. Yu.; Reinhard, P.-G.; Repko, A.; Ries, P. C.; Romig, C.; Savran, D.; Schwengner, R.; Tornow, W.; Werner, V.; Wilhelmy, J.; Zilges, A.; Zweidinger, M.

2016-01-01

The low-lying M 1 strength of the open-shell nucleus 50Cr has been studied with the method of nuclear resonance fluorescence up to 9.7 MeV using bremsstrahlung at the superconducting Darmstadt linear electron accelerator S-DALINAC and Compton backscattered photons at the High Intensity γ -ray Source (HI γ S ) facility between 6 and 9.7 MeV of the initial photon energy. Fifteen 1+ states have been observed between 3.6 and 9.7 MeV. Following our analysis the lowest 1+ state at 3.6 MeV can be considered as an isovector orbital mode with some spin admixture. The obtained results generally match the estimations and trends typical for the scissors-like mode. Detailed calculations within the Skyrme quasiparticle random-phase-approximation method and the large-scale shell model justify our conclusions. The calculated distributions of the orbital current for the lowest 1+-state suggest the schematic view of Lipparini and Stringari (isovector rotation-like oscillations inside the rigid surface) rather than the scissors-like picture of Lo Iudice and Palumbo. The spin M 1 resonance is shown to be mainly generated by spin-flip transitions between the orbitals of the f p shell.

78 FR 36239 - Notice of Inventory Completion: Wayne State University Gordon L. Grosscup Museum of Anthropology...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... human remains reportedly included a pair of scissors, a hand blown bottle, a scalpel, six silver... with several pieces of animal bone. No known individuals were identified. No associated funerary...

An Affordable Microsurgical Training System for a Beginning Neurosurgeon: How to Realize the Self-Training Laboratory.

PubMed

Chung, Sang-Bong; Ryu, Jiwook; Chung, Yeongu; Lee, Sung Ho; Choi, Seok Keun

2017-09-01

To provide detailed information about how to realize a self-training laboratory with cost-effective microsurgical instruments, especially pertinent for the novice trainee. Our training model is designed to allow the practice of the microsurgery skills in an efficient and cost-effective manner. A used stereoscopic microscope is prepared for microsurgical training. A sufficient working distance for microsurgical practice is obtained by attaching an auxiliary objective lens. The minimum instrument list includes 2 jeweler's forceps, iris scissors, and alligator clips. The iris scissors and alligator clip provide good alternatives to micro-scissors and microvascular clamp. The short time needed to set up the microscope and suture the gauze with micro-forceps makes the training model suitable for daily practice. It takes about 15 minutes to suture 10 neighboring fibers of the gauze with 10-0 nylon; thus, training can be completed more quickly. We have developed an inexpensive and efficient micro-anastomosis training system using a stereoscopic microscope and minimal micro-instruments. Especially useful for novice trainees, this system provides high accessibility for microsurgical training. Copyright © 2017 Elsevier Inc. All rights reserved.

The universal scissor component: Optimization of a reconfigurable component for deployable scissor structures

NASA Astrophysics Data System (ADS)

Alegria Mira, Lara; Thrall, Ashley P.; De Temmerman, Niels

2016-02-01

Deployable scissor structures are well equipped for temporary and mobile applications since they are able to change their form and functionality. They are structural mechanisms that transform from a compact state to an expanded, fully deployed configuration. A barrier to the current design and reuse of scissor structures, however, is that they are traditionally designed for a single purpose. Alternatively, a universal scissor component (USC)-a generalized element which can achieve all traditional scissor types-introduces an opportunity for reuse in which the same component can be utilized for different configurations and spans. In this article, the USC is optimized for structural performance. First, an optimized length for the USC is determined based on a trade-off between component weight and structural performance (measured by deflections). Then, topology optimization, using the simulated annealing algorithm, is implemented to determine a minimum weight layout of beams within a single USC component.

Carpal tunnel syndrome in women working in tea agriculture

PubMed Central

Devrimsel, Gul; Kirbas, Serkan; Yildirim, Murat; Turkyilmaz, Aysegul Kucukali; Sahin, Nilay

2014-01-01

OBJECTIVE: The aim of this cross-sectional study was to determine the frequency of carpal tunnel syndrome (CTS) among women using tea leaf scissors and compare it with normal population. METHODS: Two hundred hands of 100 women using tea leaf scissors (tea leaf scissors group) and 112 hands of 56 healthy women (control group) were clinically and electrophysiologically evaluated for CTS. Women using tea leaf scissors were evaluated with visual analog scale (VAS) for pain and Boston Carpal Tunnel Syndrome Questionnaire for symptoms and functional status. RESULTS: Carpal tunnel syndrome was diagnosed bilaterally in 62 (62%) and unilaterally in 7 (7%) women using tea leaf scissors, whereas 2 (3.57%) bilateral and 6 (10.71%) unilateral cases of CTS was diagnosed in controls. The differences in demographic factors were not statistically significant. In women with CTS using tea leaf scissors, mean symptom severity, functional status, and VAS scores were 2.73±0.60, 2.42±0.71 and 5.19±1.84, respectively. There was statistically significant difference in the frequency of CTS between women using tea leaf scissors and the control group and the risk of having CTS among women using tea leaf scissors was approximately 12 times greater (p<0.001). CONCLUSION: In tea agriculture, working with repetitive flexions and extensions of the wrist highly increases the risk of developing CTS. PMID:28058318

Digital computer program DF1758 fully coupled natural frequencies and mode shapes of a helicopter rotor blade

NASA Technical Reports Server (NTRS)

Bennett, R. L.

1975-01-01

The analytical techniques and computer program developed in the fully-coupled rotor vibration study are described. The rotor blade natural frequency and mode shape analysis was implemented in a digital computer program designated DF1758. The program computes collective, cyclic, and scissor modes for a single blade within a specified range of frequency for specified values of rotor RPM and collective angle. The analysis includes effects of blade twist, cg offset from reference axis, and shear center offset from reference axis. Coupled inplane, out-of-plane, and torsional vibrations are considered. Normalized displacements, shear forces and moments may be printed out and Calcomp plots of natural frequencies as a function of rotor RPM may be produced.

Scissors: More than a Cut Above

ERIC Educational Resources Information Center

Suzanne, Teri

2005-01-01

Scissors are a unique interactive tool when successfully used, allowing teachers and students to recognize and explore each other's creative ability while nurturing mutual communication. Freehand cutting gives children freedom to create as they cut. Scissors have the power to improve fine motor skills, stimulate creative imagination, reinforce…

Simple and Efficient Technique for Correction of Unilateral Scissor Bite Using Straight Wire.

PubMed

Dolas, Siddhesh Gajanan; Chitko, Shrikant Shrinivas; Kerudi, Veerendra Virupaxappa; Patil, Harshal Ashok; Bonde, Prasad Vasudeo

2016-03-01

Unilateral scissor bite is a relatively rare malocclusion. However, its correction is often difficult and a challenge for the clinician. This article presents simple and efficient technique for the correction of severe unilateral scissor bite in a 14 year old boy, using 0.020 S.S. A. J. Wilcock wire (premium plus) out of the spool, with minimal adjustments and placed in mandibular arch. After about six weeks time, good amount of correction was seen in the lower arch and the lower molar had been relieved of scissor bite.

Modeling the forces of cutting with scissors.

PubMed

Mahvash, Mohsen; Voo, Liming M; Kim, Diana; Jeung, Kristin; Wainer, Joshua; Okamura, Allison M

2008-03-01

Modeling forces applied to scissors during cutting of biological materials is useful for surgical simulation. Previous approaches to haptic display of scissor cutting are based on recording and replaying measured data. This paper presents an analytical model based on the concepts of contact mechanics and fracture mechanics to calculate forces applied to scissors during cutting of a slab of material. The model considers the process of cutting as a sequence of deformation and fracture phases. During deformation phases, forces applied to the scissors are calculated from a torque-angle response model synthesized from measurement data multiplied by a ratio that depends on the position of the cutting crack edge and the curve of the blades. Using the principle of conservation of energy, the forces of fracture are related to the fracture toughness of the material and the geometry of the blades of the scissors. The forces applied to scissors generally include high-frequency fluctuations. We show that the analytical model accurately predicts the average applied force. The cutting model is computationally efficient, so it can be used for real-time computations such as haptic rendering. Experimental results from cutting samples of paper, plastic, cloth, and chicken skin confirm the model, and the model is rendered in a haptic virtual environment.

Hand cumulative trauma disorders in Nigerian custom tailors: the need for redesign of manual scissors.

PubMed

Adeleye, Adedoyin Abiodun; Akanbi, Olusegun Gabriel

2015-01-01

Cutting scissors are important working tools for Nigerian custom tailors (CTs) but its usage apparently does not meet the ergonomics need of these artisans. A survey was carried out amongst CTs using questionnaires to obtain their background social-occupational demographics and observation methods to study their work performance, use of scissors and any cumulative trauma disorder (CTD) in their hands. Thicknesses of various fabrics were measured and comparison between Western world's custom tailoring job and the Nigerian type was done. The results showed some CTD risk factors with finger contusions on the 71 CTs evaluated. The right-hand contusions were traced to the constant usage of unpadded manual scissors with ungloved hands. Disparity between Western and Nigerian tailoring practice may account for the high occurrence of disorders in Nigerian CTs. Since hand dimensions are crucial in the design of hand tools, it is therefore concluded that hand anthropometry of Nigerian CTs and soft padding of manual scissors may mitigate CTD burdens on CTs' hands. Cumulative trauma disorders on the hands of low-income Nigerian CTs needed investigation. This was done via self-assessment and observational methods of the artisans’ work system. Frequent usage of unpadded manual scissors with un-gloved hands cause and exacerbate the problem. Hand anthropometry of users is crucial in scissors manufacturing.

Are we all doing it wrong? Influence of stripping and cleaving methods of laser fibers on laser lithotripsy performance.

PubMed

Kronenberg, Peter; Traxer, Olivier

2015-03-01

We assessed whether stripping and cleaving the laser fiber tip with specialized tools, namely laser fiber strippers, or ceramic or metal scissors, would influence lithotripsy performance. Laser fiber tips were stripped with a specialized laser fiber stripper or remained coated. The tips were then cleaved with metal or ceramic scissors. Laser lithotripsy experiments were performed with the 4 fiber tip combinations using an automated laser fragmentation testing system with artificial stones made of plaster of Paris or BegoStone Plus (Bego, Lincoln, Rhode Island). High frequency-low pulse energy (20 Hz and 0.5 J) and low frequency-high pulse energy (5 Hz and 2.0 J) settings were used for 30 seconds. Fissure width, depth and volume, and laser fiber tip photos were analyzed. Coated laser fiber tips always achieved significantly higher ablation volumes (sometimes greater than 50%) than stripped laser fiber tips (p <0.00001) regardless of cleaving scissor type, stone material or lithotripter setting. Coated fiber tips cleaved with metal scissors ablated as well as those cleaved with ceramic scissors (p = 0.16). However, stripped fibers were much less ablative when they were cut with metal scissors compared to ceramic scissors (p <0.00001). Harder stone material decreased ablation volume (p <0.00001). Low frequency-high pulse energy settings were an average of 3 times more ablative than high frequency-low pulse energy settings (p <0.00001). Stripping the fibers, a harder stone material and low frequency-high pulse energy settings were associated with increased fiber tip degradation. Coated laser fibers provided better lithotripsy performance and metal scissors were as good as ceramic scissors to cleave coated fibers. This knowledge may improve and simplify the way that laser lithotripsy procedures are done worldwide. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Simple and Efficient Technique for Correction of Unilateral Scissor Bite Using Straight Wire

PubMed Central

Dolas, Siddhesh Gajanan; Chitko, Shrikant Shrinivas; Kerudi, Veerendra Virupaxappa; Bonde, Prasad Vasudeo

2016-01-01

Unilateral scissor bite is a relatively rare malocclusion. However, its correction is often difficult and a challenge for the clinician. This article presents simple and efficient technique for the correction of severe unilateral scissor bite in a 14 year old boy, using 0.020 S.S. A. J. Wilcock wire (premium plus) out of the spool, with minimal adjustments and placed in mandibular arch. After about six weeks time, good amount of correction was seen in the lower arch and the lower molar had been relieved of scissor bite. PMID:27231682

Enhancement of Optical Nonlinearities in Composite Media and Structures via Local Fields and Electromagnetic Coupling Effects

NASA Technical Reports Server (NTRS)

Smith, David D.

2002-01-01

This talk will review the linear and nonlinear optical properties of metal nanoparticles and dielectric microparticles, with an emphasis on local field effects, and whispering gallery modes (WGMs), as well as the conjunction of these two effects for enhanced Raman. In particular, enhanced optical properties that result from electromagnetic coupling effects will be discussed in the context of Mie scattering from concentric spheres and bispheres. Predictions of mode splitting and photonic bandgaps in micro-spheres will be presented and will be shown to be analogous to effects that occur in coupled resonator optical waveguides (CROW). Slow and fast light in SCISSOR / CROW configurations will also be discussed.

Chemical scissors cut phosphorene and their novel electronic properties

NASA Astrophysics Data System (ADS)

Peng, Xihong; Wei, Qun

2015-03-01

Phosphorene, a recently fabricated two-dimensional puckered honeycomb structure of black phosphorus, showed promising properties for applications in nano-electronics. In this work, we report a chemical scissors effect on phosphorene, using first principles density-functional methods. It was found that chemical species, such as H, OH, F, and Cl, can act as scissors to cut phosphorene. Phosphorus nanochains and nanoribbons can be obtained using such chemical scissors. The scissors effect results from the strong bonding between the chemical species and phosphorus atoms. Other species such as O, S and Se fail to cut phosphorene due to their weak bonding with phosphorus. The electronic structures of the produced P-chains reveal that the hydrogenated P-chain is an insulator; however, the pristine P-chain is a one-dimensional Dirac material, in which the charge carriers are massless fermions travelling at an effective speed of light approximately 8x105 m/s. The obtained zigzag phosphorene nanoribbons show either metallic or semiconducting behaviors, depending on the treatment of the edge phosphorus atoms.

New endoscopic "scissors" to treat Zenker's diverticulum (with video).

PubMed

Ramchandani, Mohan; Nageshwar Reddy, D

2013-10-01

Zenker's diverticulum (ZD) is a rare disorder but is associated with significant morbidity. Cricopharyngeal (CP) myotomy is the mainstay of treatment, and various flexible endoscopic techniques have been used for division of the septum. However, there is a constant need for improvement in accessories. To evaluate the safety and effectiveness of a new electrocautery endoscopic scissor for CP myotomy in patients with symptomatic ZD. Observational human study. Tertiary-care hospital. This study involved 3 patients with symptomatic ZD. Flexible endoscopic CP myotomy was performed by using a novel scissors-type grasping device. CP myotomy involved 4 steps: (1) opening of the forceps, (2) grasping the muscle fiber, (3) closure of the forceps with application of gentle traction, and (4) dissection of muscle fibers by using cutting current. Intraprocedural bleeding was controlled with the same instrument by grasping vessels and applying coagulation current. Overall feasibility and performance, procedure time to achieve complete CP myotomy. CP myotomy was successfully performed in all patients. Mean procedure time was 10.6 minutes. There were no major adverse events. Minor intraprocedure bleeding occurred in 1 patient. Single arm, limited number of patients. The new instrument has potential advantages in comparison with standard instruments used for CP myotomy. The advantages of this new technique are better control of cutting and hemostatic abilities. Copyright © 2013 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

[Ultrasonic scissors. New vs resterilized instruments].

PubMed

Gärtner, D; Münz, K; Hückelheim, E; Hesse, U

2008-02-01

The aim of this study was to compare reliability in handling and function of resterilized and single-use disposable ultrasonic scissors. In a prospective randomized study, the surgeon blindly tested new and resterilized ultrasonographic scissors. The parameters were force of activation, cutting effect, coagulation effect, error messages, and disturbing generator noise. Fifty-one new and 49 resterilized instruments in 94 operations were evaluated. The differences in force of activation, cutting effect, and coagulation were not significant. Error messages and disturbing noises were rare in both groups. Six new instruments and two resterilized instruments had to be exchanged because of problems during surgery. This study demonstrates comparable reliability in function and handling of resterilized and new ultrasonic scissors. The use of resterilized instruments leads to distinctly reduced costs and could contribute to efficiency in laparoscopic surgery.

Manipulation of mammalian cells using a single-fiber optical microbeam

PubMed Central

Mohanty, Samarendra K.; Mohanty, Khyati S.; Berns, Michael W.

2014-01-01

The short working distance of microscope objectives has severely restricted the application of optical micromanipulation techniques at larger depths. We show the first use of fiber-optic tweezers toward controlled guidance of neuronal growth cones and stretching of neurons. Further, by mode locking, the fiber-optic tweezers beam was converted to fiber-optic scissors, enabling dissection of neuronal processes and thus allowing study of the subsequent response of neurons to localized injury. At high average powers, lysis of a three-dimensionally trapped cell was accomplished. PMID:19021429

76 FR 58038 - Notice of Inventory Completion: U.S. Department of the Interior, Bureau of Indian Affairs...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... iron handle, 1 iron handle fragment, 1 iron bowl fragment, 2 iron keys, 1 iron hinge, 1 iron gun hammer, 2 iron gun pieces, 1 fish hook, 12 nails, 1 iron ring, 1 coffee mill, 1 possible iron file, 1 large iron tack, 4 iron rods, 3 unidentified iron fragments, 1 metal tube, 1 scissors fragment, 1 finial...

Antibiotic-mediated antagonism leads to a bacterial game of rock-paper-scissors in vivo

NASA Astrophysics Data System (ADS)

Kirkup, Benjamin C.; Riley, Margaret A.

2004-03-01

Colicins are narrow-spectrum antibiotics produced by and active against Escherichia coli and its close relatives. Colicin-producing strains cannot coexist with sensitive or resistant strains in a well-mixed culture, yet all three phenotypes are recovered in natural populations. Recent in vitro results conclude that strain diversity can be promoted by colicin production in a spatially structured, non-transitive interaction, as in the classic non-transitive model rock-paper-scissors (RPS). In the colicin version of the RPS model, strains that produce colicins (C) kill sensitive (S) strains, which outcompete resistant (R) strains, which outcompete C strains. Pairwise in vitro competitions between these three strains are resolved in a predictable order (C beats S, S beats R, and R beats C), but the complete system of three strains presents the opportunity for dynamic equilibrium. Here we provide conclusive evidence of an in vivo antagonistic role for colicins and show that colicins (and potentially other bacteriocins) may promote, rather than eliminate, microbial diversity in the environment.

Endoscopic submucosal dissection of a rectal carcinoid tumor using grasping type scissors forceps

PubMed Central

Akahoshi, Kazuya; Motomura, Yasuaki; Kubokawa, Masaru; Matsui, Noriaki; Oda, Manami; Okamoto, Risa; Endo, Shingo; Higuchi, Naomi; Kashiwabara, Yumi; Oya, Masafumi; Akahane, Hidefumi; Akiba, Haruo

2009-01-01

Endoscopic submucosal dissection (ESD) with a knife is a technically demanding procedure associated with a high complication rate. The shortcomings of this method are the inability to fix the knife to the target lesion, and compression of the lesion. These can lead to major complications such as perforation and bleeding. To reduce the risk of complications related to ESD, we developed a new grasping type scissors forceps (GSF), which can grasp and incise the targeted tissue using electrosurgical current. Colonoscopy on a 55-year-old woman revealed a 10-mm rectal submucosal nodule. The histological diagnosis of the specimen obtained by biopsy was carcinoid tumor. Endoscopic ultrasonography demonstrated a hypoechoic solid tumor limited to the submucosa without lymph node involvement. It was safely and accurately resected without unexpected incision by ESD using a GSF. No delayed hemorrhage or perforation occurred. Histological examination confirmed the carcinoid tumor was completely excised with negative resection margin. PMID:19418591

Surgical scissors extension adds the 7th axis of force feedback to the Freedom 6S.

PubMed

Powers, Marilyn J; Sinclair, Ian P W; Brouwer, Iman; Laroche, Denis

2007-01-01

A virtual reality surgical simulator ideally allows seamless transition between the real and virtual world. In that respect, all of a surgeon's motions and tools must be simulated. Until now researchers have been limited to using a pen-like tool in six degrees-of-freedom. This paper presents the addition of haptically enabled scissors to the end effector of a 6-DOF haptic device, the Freedom 6S. The scissors are capable of pinching a maximum torque of 460 mN.m with low inertia and low back-drive friction. The device is a balanced design so that the user feels like they are holding no more than actual scissors, although with some added inertia on the load end. The system is interchangeable between the 6-DOF and 7-DOF configurations to allow switching tools quickly.

Comparison between scissor and laser resections of intrauterine septa in hysteroscopy

NASA Astrophysics Data System (ADS)

Wilczak, Maciej; Wozniak, Jakub; Cwojdzinski, Marek; Sajdak, Stefan; Opala, Tomasz; Pisarski, Tadeusz

1996-03-01

The comparison between results of scissors- and Nd-YAG laser-resection of intrauterine septa in hysteroscopy was shown. In 12 patients the scissors-resection and in 11 women the laser- resection was done. In the group of patients after laser procedure 10 of them were pregnant and 9 delivered healthy children. One missed abortion was diagnosed in the twenty-first week of gestation. After scissors-resection 7 women became pregnant and 5 of them bore mature children. Two of those seven lost their gestation (spontaneous abortions in the nineteenth and twentieth weeks of pregnancy). In the authors' opinion hysteroscopy is a very useful method of diagnostics and therapy of intrauterine septa. The Nd-YAG laser-resection of intrauterine septa seems to be the method with the lowest number of complications. Fertility and parity highly improves after removal of the septa localized in the uterine cavity.

Flexible RF filter using a nonuniform SCISSOR.

PubMed

Zhuang, Leimeng

2016-03-15

This work presents a flexible radiofrequency (RF) filter using an integrated microwave photonic circuit that comprises a nonuniform side-coupled integrated spaced sequence of resonators (N-SCISSOR). The filter passband can be reconfigured by varying the N-SCISSOR parameters. When employing a dual-parallel Mach-Zechnder modulator, the filter is also able to perform frequency down-conversion. In the experiment, various filter response shapes are shown, ranging from a flat-top band-pass filter to a total opposite high-rejection (>40  dB) notch filter, with a frequency coverage of greater than two octaves. The frequency down-conversion function is also demonstrated.

Stereoscopic Analysis of Silicone Breast Implant Shells Damaged by Surgical Instruments.

PubMed

Rapp, Derek A; Neaman, Keith C; Hammond, Dennis C

2015-07-01

Iatrogenic shell injury during the implantation and explantation of silicone gel breast implants may lead to eventual device failure. Identification of the patterns of injury caused by surgical instruments is important when attempting to characterize the cause of shell rupture. Understanding the true causes of device failure may help with its prevention. The purpose of this study was to microscopically characterize patterns of shell injury induced by various surgical instruments. Textured and smooth silicone gel implants were intentionally damaged with a variety of surgical instruments. Various scalpels and surgical scissors ranging in fineness were used to create full-thickness injuries in the implant shell. Optical microscopy and scanning electron microscopy were then used to image the injured area to determine patterns of injury. Full-thickness striations across the thickness of the shell could be seen with damage caused by scissors. The density of these striations correlated directly with the fineness of scissors used. No striations were seen with injuries caused by scalpels. Striations were only observed in injuries caused by scissors and suture needles. Striation density correlated with the coarseness of the cutting edge. No such striations were seen in shells damaged by a scalpel even when the angle of approach was changed. This difference can be of assistance in distinguishing between scissors versus scalpel injury of an implant shell.

The Amount and Preferred Orientation of Simple-shear in a Deformation Tensor: Implications for Detecting Shear Zones and Faults with GPS

NASA Astrophysics Data System (ADS)

Johnson, A. M.; Griffiths, J. H.

2007-05-01

At the 2005 Fall Meeting of the American Geophysical Union, Griffiths and Johnson [2005] introduced a method of extracting from the deformation-gradient (and velocity-gradient) tensor the amount and preferred orientation of simple-shear associated with 2-D shear zones and faults. Noting the 2-D is important because the shear zones and faults in Griffiths and Johnson [2005] were assumed non-dilatant and infinitely long, ignoring the scissors- like action along strike associated with shear zones and faults of finite length. Because shear zones and faults can dilate (and contract) normal to their walls and can have a scissors-like action associated with twisting about an axis normal to their walls, the more general method of detecting simple-shear is introduced and called MODES "method of detecting simple-shear." MODES can thus extract from the deformation-gradient (and velocity- gradient) tensor the amount and preferred orientation of simple-shear associated with 3-D shear zones and faults near or far from the Earth's surface, providing improvements and extensions to existing analytical methods used in active tectonics studies, especially strain analysis and dislocation theory. The derivation of MODES is based on one definition and two assumptions: by definition, simple-shear deformation becomes localized in some way; by assumption, the twirl within the deformation-gradient (or the spin within the velocity-gradient) is due to a combination of simple-shear and twist, and coupled with the simple- shear and twist is a dilatation of the walls of shear zones and faults. The preferred orientation is thus the orientation of the plane containing the simple-shear and satisfying the mechanical and kinematical boundary conditions. Results from a MODES analysis are illustrated by means of a three-dimensional diagram, the cricket- ball, which is reminiscent of the seismologist's "beach ball." In this poster, we present the underlying theory of MODES and illustrate how it works by analyzing the three- dimensional displacements measured with the Global Positioning System across the 1999 Chi-Chi earthquake ground rupture in Taiwan. In contrast to the deformation zone in the upper several meters of the ground below the surface detected by Yu et al. [2001], MODES determines the orientation and direction of shift of a shear zone representing the earthquake fault within the upper several hundred or thousand meters of ground below the surface. Thus, one value of the MODES analysis in this case is to provide boundary conditions for dislocation solutions for the subsurface shape of the main rupture during the earthquake.

Calculus, Paper, Scissors

ERIC Educational Resources Information Center

Flores, Luis; Flores, Alfinio

2006-01-01

The idea of cutting out a curve while looking at the direction of cut of the scissors is used to explore concepts related to curves, tangents and derivatives, especially tangent line, concavity and points of inflection, curvature, and a curve as envelope of tangent lines. (Contains 6 figures.)

Chemical scissors cut phosphorene nanostructures

NASA Astrophysics Data System (ADS)

Peng, Xihong; Wei, Qun

2014-12-01

Phosphorene, a recently fabricated two-dimensional puckered honeycomb structure of phosphorus, showed promising properties for applications in nano-electronics. In this work, we report a chemical scissors effect on phosphorene, using first-principles method. It was found that chemical species, such as H, OH, F, and Cl, can act as scissors to cut phosphorene. Phosphorus nanochains and nanoribbons can be obtained. The scissors effect results from the strong bonding between the chemical species and phosphorus atoms. Other species such as O, S and Se fail to cut phosphorene nanostructures due to their weak bonding with phosphorus. The electronic structures of the produced P-chains reveal that the hydrogenated chain is an insulator while the pristine chain is a one-dimensional Dirac material, in which the charge carriers are massless fermions travelling at an effective speed of light ˜8 × 105 m s-1. The obtained zigzag phosphorene nanoribbons show either metallic or semiconducting behaviors, depending on the treatment of the edge phosphorus atoms.

Characterization of adsorbed water in MIL-53(Al) by FTIR spectroscopy and ab-initio calculations.

PubMed

Salazar, J M; Weber, G; Simon, J M; Bezverkhyy, I; Bellat, J P

2015-03-28

Here, we report ab-initio calculations developed with a twofold purpose: understand how adsorbed water molecules alter the infrared spectrum of the metal-organic framework MIL-53(Al) and to investigate which are the associated physico-chemical processes. The analyzed structures are the two anhydrous narrow (np⊘) and large (lp⊘) pore forms and the hydrated narrow pore form (np-H2O) of the MIL-53(Al). For these structures, we determined their corresponding infrared spectra (FTIR) and we identified the vibrational modes associated to the dominant spectral lines. We show that wagging and scissoring modes of CO2 give flexibility to the structure for facilitating the lp⊘- np⊘ transition. In our studies, this transition is identified by eight vibrational modes including the δCH(18a) vibrational mode currently used to identify the mentioned transition. We report an exhaustive band identification of the infrared spectra associated to the analyzed structures. Moreover, the FTIR for the np-H2O structure allowed us to identify four types of water molecules linked to the host structure by one to three hydrogen bonds.

Scale-free memory model for multiagent reinforcement learning. Mean field approximation and rock-paper-scissors dynamics

NASA Astrophysics Data System (ADS)

Lubashevsky, I.; Kanemoto, S.

2010-07-01

A continuous time model for multiagent systems governed by reinforcement learning with scale-free memory is developed. The agents are assumed to act independently of one another in optimizing their choice of possible actions via trial-and-error search. To gain awareness about the action value the agents accumulate in their memory the rewards obtained from taking a specific action at each moment of time. The contribution of the rewards in the past to the agent current perception of action value is described by an integral operator with a power-law kernel. Finally a fractional differential equation governing the system dynamics is obtained. The agents are considered to interact with one another implicitly via the reward of one agent depending on the choice of the other agents. The pairwise interaction model is adopted to describe this effect. As a specific example of systems with non-transitive interactions, a two agent and three agent systems of the rock-paper-scissors type are analyzed in detail, including the stability analysis and numerical simulation. Scale-free memory is demonstrated to cause complex dynamics of the systems at hand. In particular, it is shown that there can be simultaneously two modes of the system instability undergoing subcritical and supercritical bifurcation, with the latter one exhibiting anomalous oscillations with the amplitude and period growing with time. Besides, the instability onset via this supercritical mode may be regarded as “altruism self-organization”. For the three agent system the instability dynamics is found to be rather irregular and can be composed of alternate fragments of oscillations different in their properties.

Main interior space facing south toward the ocean. Original scissor ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Main interior space facing south toward the ocean. Original scissor trusses and deck roof are visible at the top. Octagonal window with large picture windows face the ocean. - San Luis Yacht Club, Avila Pier, South of Front Street, Avila Beach, San Luis Obispo County, CA

Mola Scissors: An Exercise in Design.

ERIC Educational Resources Information Center

Carson, Janet

1982-01-01

Describes a design exercise for college education majors. Five paper scissor shapes are used to illustrate the role of balance, variation, repetition, and unity in design. After comparing their own designs to Indian molas, students explore how color and shape affect design by elaborating their work with oil crayons. (AM)

Social cycling and conditional responses in the Rock-Paper-Scissors game

PubMed Central

Wang, Zhijian; Xu, Bin; Zhou, Hai-Jun

2014-01-01

How humans make decisions in non-cooperative strategic interactions is a big question. For the fundamental Rock-Paper-Scissors (RPS) model game system, classic Nash equilibrium (NE) theory predicts that players randomize completely their action choices to avoid being exploited, while evolutionary game theory of bounded rationality in general predicts persistent cyclic motions, especially in finite populations. However as empirical studies have been relatively sparse, it is still a controversial issue as to which theoretical framework is more appropriate to describe decision-making of human subjects. Here we observe population-level persistent cyclic motions in a laboratory experiment of the discrete-time iterated RPS game under the traditional random pairwise-matching protocol. This collective behavior contradicts with the NE theory but is quantitatively explained, without any adjustable parameter, by a microscopic model of win-lose-tie conditional response. Theoretical calculations suggest that if all players adopt the same optimized conditional response strategy, their accumulated payoff will be much higher than the reference value of the NE mixed strategy. Our work demonstrates the feasibility of understanding human competition behaviors from the angle of non-equilibrium statistical physics. PMID:25060115

Scissor Sorcery: Cutting Activities for the Early Childhood Curriculum.

ERIC Educational Resources Information Center

Carpenter, Sharan Bryant

This handbook, designed for use with preschool and elementary age children, provides instructions and instructional materials for the development of proficiency in cutting. Scissor cutting is a critically important activity for young children to practice because, along with coloring and pasting, it is used widely to foster the three R's as well as…

Local dispersal promotes biodiversity in a real-life game of rock-paper-scissors

NASA Astrophysics Data System (ADS)

Kerr, Benjamin; Riley, Margaret A.; Feldman, Marcus W.; Bohannan, Brendan J. M.

2002-07-01

One of the central aims of ecology is to identify mechanisms that maintain biodiversity. Numerous theoretical models have shown that competing species can coexist if ecological processes such as dispersal, movement, and interaction occur over small spatial scales. In particular, this may be the case for non-transitive communities, that is, those without strict competitive hierarchies. The classic non-transitive system involves a community of three competing species satisfying a relationship similar to the children's game rock-paper-scissors, where rock crushes scissors, scissors cuts paper, and paper covers rock. Such relationships have been demonstrated in several natural systems. Some models predict that local interaction and dispersal are sufficient to ensure coexistence of all three species in such a community, whereas diversity is lost when ecological processes occur over larger scales. Here, we test these predictions empirically using a non-transitive model community containing three populations of Escherichia coli. We find that diversity is rapidly lost in our experimental community when dispersal and interaction occur over relatively large spatial scales, whereas all populations coexist when ecological processes are localized.

Evaluation of the split cantilever beam for Mode 3 delamination testing

NASA Technical Reports Server (NTRS)

Martin, Roderick H.

1989-01-01

A test rig for testing a thick split cantilever beam for scissoring delamination (mode 3) fracture toughness was developed. A 3-D finite element analysis was conducted on the test specimen to determine the strain energy release rate, G, distribution along the delamination front. The virtual crack closure technique was used to calculate the G components resulting from interlaminar tension, GI, interlaminar sliding shear, GII, and interlaminar tearing shear, GIII. The finite element analysis showed that at the delamination front no GI component existed, but a GII component was present in addition to a GIII component. Furthermore, near the free edges, the GII component was significantly higher than the GIII component. The GII/GIII ratio was found to increase with delamination length but was insensitive to the beam depth. The presence of GII at the delamination front was verified experimentally by examination of the failure surfaces. At the center of the beam, where the failure was in mode 3, there was significant fiber bridging. However, at the edges of the beam where the failure was in mode 3, there was no fiber bridging and mode 2 shear hackles were observed. Therefore, it was concluded that the split cantilever beam configuration does not represent a pure mode 3 test. The experimental work showed that the mode 2 fracture toughness, GIIc, must be less than the mode 3 fracture toughness, GIIIc. Therefore, a conservative approach to characterizing mode 3 delamination is to equate GIIIc to GIIc.

Nonlinear Kerr enhancement of the Sagnac effect in a coherently coupled array of optical microresonators

NASA Astrophysics Data System (ADS)

Wang, Chao; Search, Christopher

2013-03-01

Optical gyroscopes based on the Sagnac effect are of great interest both theoretically and practically. Previously it has been suggested a nonlinear Kerr medium inserted into a ring resonator gyroscope can largely increase the rotation sensitivity due to an instability caused by the non-reciprocal self-phase and cross-phase modulations. Recently, coupled microresonator arrays such as Side-Coupled Integrated Spaced Sequence of Resonators (SCISSOR) and Coupled Resonator Optical Waveguides (CROW) have drawn interest as potential integrated gyroscopes due to the sensitivity enhancement resulting from distributed interference between resonators. Here we analyze a SCISSOR system, which consists of an array of microresonators evanescently coupled to two parallel bus waveguides in the presence of a strong intra-resonator Kerr nonlinearity. We show that the distributed interference in the waveguides combined with the nonlinearly enhanced Sagnac effect in the resonators can further improve the sensitivity compared with either a single resonator of equal footprint or SCISSOR without a Kerr nonlinearity. Numerical simulation shows that bistability in the SCISSOR occurs and the rotation sensitivity dIoutput/dω can go to infinity near the boundaries of the bistable region.

Nose biopsy: a comparison between two sampling techniques.

PubMed

Segal, Nili; Osyntsov, Lidia; Olchowski, Judith; Kordeluk, Sofia; Plakht, Ygal

2016-06-01

Pre operative biopsy is important in obtaining preliminary information that may help in tailoring the optimal treatment. The aim of this study was to compare two sampling techniques of obtaining nasal biopsy-nasal forceps and nasal scissors in terms of pathological results. Biopsies of nasal lesions were taken from patients undergoing nasal surgery by two techniques- with nasal forceps and with nasal scissors. Each sample was examined by a senior pathologist that was blinded to the sampling method. A grading system was used to rate the crush artifact in every sample (none, mild, moderate, severe). A comparison was made between the severity of the crush artifact and the pathological results of the two techniques. One hundred and forty-four samples were taken from 46 patients. Thirty-one were males and the mean age was 49.6 years. Samples taken by forceps had significantly higher grades of crush artifacts compared to those taken by scissors. The degree of crush artifacts had a significant influence on the accuracy of the pre operative biopsy. Forceps cause significant amount of crush artifacts compared to scissors. The degree of crush artifact in the tissue sample influences the accuracy of the biopsy.

Resonances in odd-odd 182Ta

NASA Astrophysics Data System (ADS)

Brits, C. P.; Wiedeking, M.; Bello Garrote, F. L.; Bleuel, D. L.; Giacoppo, F.; Görgen, A.; Guttormsen, M.; Hadynska-Klek, K.; Hagen, T. W.; Ingeberg, V. W.; Kheswa, B. V.; Klintefjord, M.; Larsen, A. C.; Malatji, K. L.; Nyhus, H. T.; Papka, P.; Renstrøm, T.; Rose, S.; Sahin, E.; Siem, S.; Tveten, G. M.; Zeiser, F.

2017-09-01

Enhanced γ-decay on the tail of the giant electric dipole resonance, such as the scissors or pygmy resonances, can have significant impact on (n,γ) reaction rates. These rates are important input for modeling processes that take place in astrophysical environments and nuclear reactors. Recent results from the University of Oslo indicate the existence of a significant enhancement in the photon strength function for nuclei in the actinide region due to the scissors resonance. Further, the M1 strength distribution of the scissors resonances in rare earth nuclei has been studied extensively over the years. To investigate the evolution and persistence of the scissor resonance in other mass regions, an experiment was performed utilizing the NaI(Tl) γ-ray detector array (CACTUS) and silicon particle telescopes (SiRi) at the University of Oslo Cyclotron laboratory. Particle-γ coincidences from the 181Ta(d,p)182Ta and 181Ta(d,d')181Ta reactions were used to measure the nuclear level density and photon strength function of the well-deformed 181Ta and 182Ta systems, to investigate the existence of resonances below the neutron separation energy. Note to the reader: the title of this article has been corrected on September 19, 2017.

Measurement of the {sup 157}Gd(n,{gamma}) reaction with the DANCE {gamma} calorimeter array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chyzh, A.; Dashdorj, D.; Lawrence Livermore National Laboratory, Livermore, California 94551

2011-07-15

The {sup 157}Gd(n,{gamma}) reaction was measured with the DANCE {gamma} calorimeter (consisting of 160 BaF{sub 2} scintillation detectors) at the Los Alamos Neutron Science Center. The multiplicity distributions of the {gamma} decay were used to determine the resonance spins up to E{sub n}=300 eV. The {gamma}-ray energy spectra for different multiplicities were measured for the s-wave resonances. The shapes of these spectra were compared with simulations based on the use of the DICEBOX statistical model code. Simulations showed that the scissors mode is required not only for the ground-state transitions but also for transitions between excited states.

Beyond Scissors and Glue: Staff Developers Guide Teachers in Piecing Together a Vertically Aligned Curriculum and in Creating a Method to Get This Job Done

ERIC Educational Resources Information Center

Phelps, Vickie

2005-01-01

Layers and layers of curricula stuffed into vinyl binders were the norm in this Texas district until teachers sat down with scissors and glue to create a vertically aligned curriculum. They then created standards-based lessons to support the curriculum and put them into a database readily accessible by all.

Spiraling patterns in evolutionary models inspired by bacterial games with cyclic dominance

NASA Astrophysics Data System (ADS)

Mobilia, Mauro

2015-03-01

Understanding the mechanisms allowing the maintenance of biodiversity is a central issue in biology. Evolutionary game theory, where the success of one species depends on what the others are doing, provides a promising framework to investigate this complex problem. Experiments on microbial populations have shown that cyclic local interactions promote species coexistence. In this context, rock-paper-scissors games - in which rock crushes scissors, scissors cut paper, and paper wraps rock - are often used to model the dynamics of populations in cyclic competition. After a brief survey of some inspiring experiments, I will discuss the subtle interplay between individuals' mobility and their local interactions in two-dimensional rock-paper-scissors systems. This leads to the loss of biodiversity above a certain mobility threshold, and to the formation of spiraling patterns below the critical mobility rate. I will then study a generic rock-paper-scissors metapopulation model formulated on a two-dimensional grid of patches. When these have a large carrying capacity, the model's dynamics is faithfully described in terms of the system's complex Ginzburg-Landau equation properly derived from a multiscale expansion. The properties of the ensuing complex Ginzburg-Landau equation are exploited to derive the system's phase diagram and to characterize the spatio-temporal properties of the spiraling patterns in each phase. This enables us to analyze the spiral waves stability, how these are influenced by linear and nonlinear diffusion, and to discuss phenomena such as far-field breakup. Presentation mainy based on joint work with B. Szczesny and A. M. Rucklidge. Fruitful earlier collaborations with E. Frey, Q. He, T. Reichenbach, and U. C. Täuber are also acknowledged. Work supported by the UK EPSRC (Grant No. EP/P505593/1).

Clonal selection prevents tragedy of the commons when neighbors compete in a rock-paper-scissors game

NASA Astrophysics Data System (ADS)

Juul, Jeppe; Sneppen, Kim; Mathiesen, Joachim

2012-06-01

The rock-paper-scissors game is a model example of the ongoing cyclic turnover typical of many ecosystems, ranging from the terrestrial and aquatic to the microbial. Here we explore the evolution of a rock-paper-scissors system where three species compete for space. The species are allowed to mutate and change the speed by which they invade one another. In the case when all species have similar mutation rates, we observe a perpetual arms race where no single species prevails. When only two species mutate, their aggressions increase indefinitely until the ecosystem collapses and only the nonmutating species survives. Finally we show that when only one species mutates, group selection removes individual predators with the fastest growth rates, causing the growth rate of the species to stabilize. We explain this group selection quantitatively.

Paper-cutting operations using scissors in Drury's law tasks.

PubMed

Yamanaka, Shota; Miyashita, Homei

2018-05-01

Human performance modeling is a core topic in ergonomics. In addition to deriving models, it is important to verify the kinds of tasks that can be modeled. Drury's law is promising for path tracking tasks such as navigating a path with pens or driving a car. We conducted an experiment based on the observation that paper-cutting tasks using scissors resemble such tasks. The results showed that cutting arc-like paths (1/4 of a circle) showed an excellent fit with Drury's law (R 2  > 0.98), whereas cutting linear paths showed a worse fit (R 2  > 0.87). Since linear paths yielded better fits when path amplitudes were divided (R 2  > 0.99 for all amplitudes), we discuss the characteristics of paper-cutting operations using scissors. Copyright © 2018 Elsevier Ltd. All rights reserved.

A comparative study of grasping-type scissors forceps and insulated-tip knife for endoscopic submucosal dissection of early gastric cancer: a randomized controlled trial

PubMed Central

Nagai, Kengo; Uedo, Noriya; Yamashina, Takeshi; Matsui, Fumi; Matsuura, Noriko; Ito, Takashi; Yamamoto, Sachiko; Hanaoka, Noboru; Takeuchi, Yoji; Higashino, Koji; Ishihara, Ryu; Iishi, Hiroyasu

2016-01-01

Background and study aims: Endoscopic submucosal dissection (ESD) for early gastric cancer (EGC) is technically difficult for beginners. Few comparative studies of technical feasibility, efficacy, and safety using various devices have been reported. This study evaluated the feasibility, efficacy, and safety of ESD for EGC < 2 cm using grasping-type scissors forceps (GSF) or insulated-tip knife (IT2) for three resident endoscopists. Patients and methods: This was a randomized phase II study in a cancer referral center. A total of 108 patients with 120 EGCs were enrolled with the following characteristics: differentiated-type mucosal EGC, without ulcers or scars, < 2 cm (86 men, 22 women; median age 72 years). All lesions were stratified according to operator and tumor location (antrum or corpus), assigned randomly to two groups (GSF or IT2), and resected by ESD. Self-completion rate, complete resection rate, procedure time, and adverse events were evaluated as main outcome measures. Results: There was no difference in self-completion rate between the IT2 group (77 %, 47/61, P = 0.187) and the GSF group (66 %, 37/56). Also, there were no differences in en bloc resection rate (98 %, 60/61 vs. 93 %, 52/56, P = 0.195) and adverse events (3.3 %, 2/61 vs. 7.1 %, 4/56, P = 0.424). Median (min [range]) procedure time in the IT2 group (47 [33 – 67], P = 0.003) was shorter than that in the GSF group (66 [40 – 100]). Limitations of this study were the small sample size and single center design. Conclusions: ESD with GSF did not show a statistically significant advantage in improvement of self-completion rate over IT2. (Study registration: UMIN 000005048) PMID:27556074

Spatially sculpted laser scissors for study of DNA damage and repair

NASA Astrophysics Data System (ADS)

Stephens, Jared; Mohanty, Samarendra K.; Genc, Suzanne; Kong, Xiangduo; Yokomori, Kyoko; Berns, Michael W.

2009-09-01

We present a simple and efficient method for controlled linear induction of DNA damage in live cells. By passing a pulsed laser beam through a cylindrical lens prior to expansion, an elongated elliptical beam profile is created with the ability to expose controlled linear patterns while keeping the beam and the sample stationary. The length and orientation of the beam at the sample plane were reliably controlled by an adjustable aperture and rotation of the cylindrical lens, respectively. Localized immunostaining by the DNA double strand break (DSB) markers phosphorylated H2AX (γH2AX) and Nbs1 in the nuclei of HeLa cells exposed to the ``line scissors'' was shown via confocal imaging. The line scissors method proved more efficient than the scanning mirror and scanning stage methods at induction of DNA DSB damage with the added benefit of having a greater potential for high throughput applications.

Challenge of false alarms in nitroaromatic explosive detection--a detection device based on surface-enhanced Raman spectroscopy.

PubMed

Wackerbarth, Hainer; Gundrum, Lars; Salb, Christian; Christou, Konstantin; Viöl, Wolfgang

2010-08-10

A challenge in the detection of explosives is the differentiation between explosives and contaminants. Synthetic musk-containing perfumes can cause false alarms, as these perfumes are nitroaromatic compounds, which can be mistaken for trinitro toluene (TNT) by some detectors. We present a detection principle based on surface-enhanced Raman scattering (SERS). A stream of the airborne compounds is focused and resublimated on a cooled nanostructured gold surface. We recorded high-resolution SERS spectra of TNT, musk xylene, and musk ketone. The nitroaromatic compounds can be identified unambiguously by their SERS spectra. Even the dominant bands containing nitro-group scissoring and symmetric stretching modes are significantly shifted by the difference in molecular structure.

Students Learning Physics While Lifting Themselves: A Simple Analysis of a Scissors Jack

ERIC Educational Resources Information Center

Haugland, Ole Anton

2017-01-01

Every time I have to jack up my car, I am a bit surprised by how slowly the scissors jack works the higher I raise it, and close to maximum height I need very little force to turn the crank. This agrees well with the principle of simple machines. Since I have to jack up my car at least twice a year to change between winter tires and summer tires,…

Commissioning a hobby cutting device for radiochromic film preparation.

PubMed

Zolfaghari, Somayeh; Francis, Kirby E; Kairn, Tanya; Crowe, Scott B

2017-06-01

In addition to a high spatial resolution and well characterised dose response, one of the major advantages of radiochromic film as a dosimeter is that sheets of film can be cut into pieces suitable for use as calibration films, and for in vivo and phantom measurements. The cutting of film is typically done using scissors or a guillotine, and this process can be time-consuming, limited in precision, requires extensive handling and does not allow holes to be cut from the film without cutting from an existing edge. This study investigated the use of a Brother ScanNCut hobby cutting system for EBT3 film preparation. The optimal operating parameters (blade size, pressure, speed) that resulted in precise cuts with minimal delamination at cut edges were identified using test cutting patterns. These parameters were then used to cut a large film insert for a stereotactic head phantom for comparison against an insert cut with scissors. While the hobby cutting system caused a wider region of delamination at the film edge (1.8 mm) compared to scissors (1 mm), the hobby cutting system was found to be able to produce reproducible cuts more efficiently and more accurately than scissors. The use of the hobby cutting system is recommended for complex phantom inserts (containing sharp corners or holes for alignment rods) or in situations where large numbers of film pieces need to be prepared.

The effect of opponent type on human performance in a three-alternative choice task.

PubMed

Lie, Celia; Baxter, Jennifer; Alsop, Brent

2013-10-01

Adult participants played computerised games of "Paper Scissors Rock". Participants in one group were told that they were playing against the computer, and those in the other group were told that they were playing against another participant in the adjacent room. The participant who won the most games would receive a $50 prize. For both groups however, the opponent's responses (paper, scissors, or rock) were generated by the computer, and the distribution of these responses was varied across four blocks of 126 trials. Results were analysed using the generalised matching law for the three possible pairs of alternatives (paper vs. scissors, paper vs. rock, and scissors vs. rock) across all participants in each group. Overall, significantly higher estimates of sensitivity to the distribution of opponent's responses were obtained from participants who were told their opponent was a computer compared to participants who were told their opponent was another participant. While adding to the existing literature showing that the generalised matching law is an adequate descriptor of human three-alternative choice behaviour, these findings show that external factors such as perceived opponent type can affect the efficacy of reinforcer contingencies on human behaviour. This suggests that generalising the results from tasks performed against a computer to real-life human-to-human interactions warrants some caution. Copyright © 2013 Elsevier B.V. All rights reserved.

Acute optic nerve sheath fenestration in humans using the free electron laser (FEL): a case report

NASA Astrophysics Data System (ADS)

Joos, Karen M.; Mawn, Louise A.; Shen, Jin-Hui; Jansen, E. Duco; Casagrande, Vivien A.

2002-06-01

Our previous studies using rabbits and monkeys showed that the Amide II wavelength (6.45 micrometers ) produced by the FEL could efficiently produce an optic nerve sheath fenestration with minimal damage. In order to determine if the technology safely could be applied to human surgery, we used 2 blind human eyes during enucleation to compare the results of producing fenestrations with the FEL or a scissors. FDA and Vanderbilt IRB approvals, and individual patient consents were obtained. The FEL energy was transmitted to a human operating room. After disinsertion of the medial rectus muscle, an optic nerve sheath fenestration (2 mm diameter) was made with either the FEL (6.45 micrometers , 325 micrometers spot size, 30 Hz, 3 mJ) through a hollow waveguide surgical probe or with a scissors. The enucleation was then completed. The optic nerve was dissected from the globe and fixed. Specimens were examined histologically. Dural incisions were effective with both methods. FEL energy at 6.45 micrometers can be transmitted to an operating room and delivered to human ocular tissue through a hollow waveguide surgical probe. This FEL wavelength can produce an optic nerve sheath fenestration without acute direct damage to the nerve in this case report.

Competitive intransitivity, population interaction structure, and strategy coexistence.

PubMed

Laird, Robert A; Schamp, Brandon S

2015-01-21

Intransitive competition occurs when competing strategies cannot be listed in a hierarchy, but rather form loops-as in the game rock-paper-scissors. Due to its cyclic competitive replacement, competitive intransitivity promotes strategy coexistence, both in rock-paper-scissors and in higher-richness communities. Previous work has shown that this intransitivity-mediated coexistence is strongly influenced by spatially explicit interactions, compared to when populations are well mixed. Here, we extend and broaden this line of research and examine the impact on coexistence of intransitive competition taking place on a continuum of small-world networks linking spatial lattices and regular random graphs. We use simulations to show that the positive effect of competitive intransitivity on strategy coexistence holds when competition occurs on networks toward the spatial end of the continuum. However, in networks that are sufficiently disordered, increasingly violent fluctuations in strategy frequencies can lead to extinctions and the prevalence of monocultures. We further show that the degree of disorder that leads to the transition between these two regimes is positively dependent on population size; indeed for very large populations, intransitivity-mediated strategy coexistence may even be possible in regular graphs with completely random connections. Our results emphasize the importance of interaction structure in determining strategy dynamics and diversity. Copyright © 2014 Elsevier Ltd. All rights reserved.

Scissors Duct

NASA Image and Video Library

2007-06-26

Stennis Space Center engineers are preparing to conduct water tests on an updated version of the scissors duct component of the J-2X engine. Measuring about 2 feet long and about 8 inches in diameter, the duct on the J-2X predecessor, the J-2, connected its fuel turbo pumps to the flight vehicle's upper stage run tanks. According to NASA's J-2X project manager at SSC, Gary Benton, the water tests should establish the limits of the duct's ability to withstand vibration.

Preceding bronchial cutting for exposure of the pulmonary artery buried in scar tissue after chemoradiotherapy.

PubMed

Nomori, Hiroaki; Cong, Yue; Sugimura, Hiroshi

2017-01-01

It is often difficult to expose the pulmonary artery buried in a scar tissue, especially in lung cancer patients that responded well to neoadjuvant chemoradiotherapy. Difficulty to access pulmonary artery branches may lead to potentially unnecessary pneumonectomy. To complete lobectomy in such cases, a technique with preceding bronchial cutting for exposure of the pulmonary artery is presented. After dissecting the pulmonary vein, the lobar bronchus is cut from the opposite side of the pulmonary artery with scissors. The back wall of the lobar bronchus is cut using a surgical knife from the luminal face, which can expose the pulmonary artery behind the bronchial stump and then complete lobectomy. Fourteen patients have been treated using the present technique, enabling complete resection by lobectomy (including sleeve lobectomy in 3 patients) without major bleeding. The present procedure can expose pulmonary artery buried in scar tissue, resulting in making the lobectomy safer.

Characterization of spiraling patterns in spatial rock-paper-scissors games.

PubMed

Szczesny, Bartosz; Mobilia, Mauro; Rucklidge, Alastair M

2014-09-01

The spatiotemporal arrangement of interacting populations often influences the maintenance of species diversity and is a subject of intense research. Here, we study the spatiotemporal patterns arising from the cyclic competition between three species in two dimensions. Inspired by recent experiments, we consider a generic metapopulation model comprising "rock-paper-scissors" interactions via dominance removal and replacement, reproduction, mutations, pair exchange, and hopping of individuals. By combining analytical and numerical methods, we obtain the model's phase diagram near its Hopf bifurcation and quantitatively characterize the properties of the spiraling patterns arising in each phase. The phases characterizing the cyclic competition away from the Hopf bifurcation (at low mutation rate) are also investigated. Our analytical approach relies on the careful analysis of the properties of the complex Ginzburg-Landau equation derived through a controlled (perturbative) multiscale expansion around the model's Hopf bifurcation. Our results allow us to clarify when spatial "rock-paper-scissors" competition leads to stable spiral waves and under which circumstances they are influenced by nonlinear mobility.

Infrared laser spectroscopy of the n-propyl and i-propyl radicals: Stretch-bend Fermi coupling in the alkyl CH stretch region

DOE PAGES

Franke, Peter R.; Tabor, Daniel P.; Moradi, Christopher P.; ...

2016-12-13

The n-propyl and i-propyl radicals were generated in the gas phase via pyrolysis of n-butyl nitrite [CH 3(CH 2) 3ONO] and i-butyl nitrite [(CH 3) 2CHCH 2ONO], respectively. Nascent radicals were promptly solvated by a beam of He nanodroplets, and the infrared spectra of the radicals were recorded in the CH stretching region. Several previously unreported bands are observed between 2800 and 3150 cm –1. The CH stretching modes observed above 3000 cm –1 are in excellent agreement with CCSD(T) anharmonic frequencies computed using second-order vibrational perturbation theory. However, between 2800 and 3000 cm –1, the spectra of n- andmore » i-propyl radicals become congested and difficult to assign due to the presence of multiple anharmonic resonance polyads. To model the spectrally congested region, Fermi and Darling-Dennison resonances are treated explicitly using “dressed” Hamiltonians and CCSD(T) quartic force fields in the normal mode representation, and the agreement with experiment is less than satisfactory. Computations employing local mode effective Hamiltonians reveal the origin of the spectral congestion to be strong coupling between the high frequency CH stretching modes and the lower frequency CH n bending/scissoring motions. The most significant coupling is between stretches and bends localized on the same CH 2/CH 3 group. As a result, spectral simulations using the local mode approach are in excellent agreement with experiment.« less

Infrared laser spectroscopy of the n-propyl and i-propyl radicals: Stretch-bend Fermi coupling in the alkyl CH stretch region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franke, Peter R.; Tabor, Daniel P.; Moradi, Christopher P.

The n-propyl and i-propyl radicals were generated in the gas phase via pyrolysis of n-butyl nitrite [CH 3(CH 2) 3ONO] and i-butyl nitrite [(CH 3) 2CHCH 2ONO], respectively. Nascent radicals were promptly solvated by a beam of He nanodroplets, and the infrared spectra of the radicals were recorded in the CH stretching region. Several previously unreported bands are observed between 2800 and 3150 cm –1. The CH stretching modes observed above 3000 cm –1 are in excellent agreement with CCSD(T) anharmonic frequencies computed using second-order vibrational perturbation theory. However, between 2800 and 3000 cm –1, the spectra of n- andmore » i-propyl radicals become congested and difficult to assign due to the presence of multiple anharmonic resonance polyads. To model the spectrally congested region, Fermi and Darling-Dennison resonances are treated explicitly using “dressed” Hamiltonians and CCSD(T) quartic force fields in the normal mode representation, and the agreement with experiment is less than satisfactory. Computations employing local mode effective Hamiltonians reveal the origin of the spectral congestion to be strong coupling between the high frequency CH stretching modes and the lower frequency CH n bending/scissoring motions. The most significant coupling is between stretches and bends localized on the same CH 2/CH 3 group. As a result, spectral simulations using the local mode approach are in excellent agreement with experiment.« less

Collective excitation frequencies and stationary states of trapped dipolar Bose-Einstein condensates in the Thomas-Fermi regime

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bijnen, R. M. W. van; Department of Physics and Astronomy, McMaster University, Hamilton, Ontario L8S 4M1; Parker, N. G.

We present a general method for obtaining the exact static solutions and collective excitation frequencies of a trapped Bose-Einstein condensate (BEC) with dipolar atomic interactions in the Thomas-Fermi regime. The method incorporates analytic expressions for the dipolar potential of an arbitrary polynomial density profile, thereby reducing the problem of handling nonlocal dipolar interactions to the solution of algebraic equations. We comprehensively map out the static solutions and excitation modes, including non-cylindrically-symmetric traps, and also the case of negative scattering length where dipolar interactions stabilize an otherwise unstable condensate. The dynamical stability of the excitation modes gives insight into the onsetmore » of collapse of a dipolar BEC. We find that global collapse is consistently mediated by an anisotropic quadrupolar collective mode, although there are two trapping regimes in which the BEC is stable against quadrupole fluctuations even as the ratio of the dipolar to s-wave interactions becomes infinite. Motivated by the possibility of a fragmented condensate in a dipolar Bose gas due to the partially attractive interactions, we pay special attention to the scissors modes, which can provide a signature of superfluidity, and identify a long-range restoring force which is peculiar to dipolar systems. As part of the supporting material for this paper we provide the computer program used to make the calculations, including a graphical user interface.« less

Ultrasonic scissors-assisted 'open-book' thyroidectomy in massive goiter compressing airway and causing unilateral vocal cord paralysis.

PubMed

M, Irfan; Yaroko, Ali Ango; S M, Najeb; Periasamy, Centilnathan

2013-04-01

A massive goiter may constrict the trachea resulting in shortness of breath. Recurrent laryngeal nerve compression may cause vocal cord paralysis. We highlight a case of a 62- year-old female with a 30 year history of an anterior neck swelling gradually increasing in size. She presented with acute symptoms of upper airway obstruction and voice changes. Emergency thyroidectomy was performed by dividing the middle part of the gland using ultrasonic scissors. The recovery was uneventful and the patient regained normal vocal cord function post operatively.

Feasibility of New Technology to Comprehensively Characterize Air Emissions from Full Scale Open Burning and Open Detonation

DTIC Science & Technology

2010-12-01

balloon and ATV winch system (right). 9 Figure 2-4. Scissor lift (left) and instrumentation on the scissor lift (right). 10 Figure 2-5. Concrete burn...indoor facility (#1376), bunkers, a gravel/sand detonation area for open detonation tests (~330 ft × 165 ft, ~100 m ×50 m) and a concrete burn pad... Concrete burn pad with six reusable sheet steel pans showing a burn of 100 lb (45.5 kg) of M1 propellant. 2.2.3.2 Open Detonation Based on several pre

Endoscope and System and Method of Operation Thereof

NASA Technical Reports Server (NTRS)

Manohara, Harish M. (Inventor); Liao, Anna (Inventor); Bae, Youngsam (Inventor); Shahinian, Hrayr Karnig (Inventor)

2017-01-01

An endoscope including a rigid section having opposed first and second ends and an opening situated between the first and second ends, the rigid section defining a longitudinal axis; a handle portion coupled to a first end of the rigid section and having first and second scissor-type handles suitable for grasping by a user; and a base part situated at the second end of the rigid section and coupled to the first handle of the scissor-type handles such that displacement of the first handle causes a rotation of the base part.

Endoscope and System and Method of Operation Thereof

NASA Technical Reports Server (NTRS)

Manohara, Harish M. (Inventor); Liao, Anna (Inventor); Bae, Youngsam (Inventor); Shahinian, Hrayr Karnig (Inventor)

2012-01-01

An endoscope including a rigid section having opposed first and second ends and an opening situated between the first and second ends, the rigid section defining a longitudinal axis; a handle portion coupled to a first end of the rigid section and having first and second scissor-type handles suitable for grasping by a user; and a base part situated at the second end of the rigid section and coupled to the first handle of the scissor-type handles such that displacement of the first handle causes a rotation of the base part.

Infrared Laser Spectroscopy of the n-PROPYL and i-PROPYL Radicals in Helium Droplets: Significant Bend-Stretch Coupling Revealed in the CH Stretch Region

NASA Astrophysics Data System (ADS)

Moradi, Christopher P.; Douberly, Gary E.; Tabor, Daniel P.; Sibert, Edwin

2016-06-01

The n-propyl and i-propyl radicals were generated in the gas phase via pyrolysis of n-butyl nitrite (CH3(CH2)3ONO) and i-butyl nitrite (CH3CH(CH3)CH2ONO) precursors, respectively. Nascent radicals were promptly solvated by a beam of He nanodroplets, and the infrared spectra of the radicals were recorded in the C-H stretching region. In addition to three vibrations of n-propyl previously measured in an Ar matrix, we observe many unreported bands between 2800 and 3150 wn, which we attribute to propyl radicals. The C-H stretching modes observed above 2960 wn for both radicals are in excellent agreement with anharmonic frequencies computed using VPT2. Between 2800 and 2960 wn, however, the spectra of n-propyl and i-propyl radicals become quite congested and difficult to assign due to the presence of multiple anharmonic resonances. Computations employing a local mode Hamiltonian reveal the origin of the spectral congestion to be strong coupling between the high frequency C-H stretching modes and the lower frequency bending/scissoring motions. The only significant local coupling is between stretches and bends on the same CH2/CH3 group.

Emergency cricothyrotomy-a comparative study of different techniques in human cadavers.

PubMed

Schober, Patrick; Hegemann, Martina C; Schwarte, Lothar A; Loer, Stephan A; Noetges, Peter

2009-02-01

Emergency cricothyrotomy is the final lifesaving option in "cannot intubate-cannot ventilate" situations. Fast, efficient and safe management is indispensable to reestablish oxygenation, thus the quickest, most reliable and safest technique should be used. Several cricothyrotomy techniques exist, which can be grouped into two categories: anatomical-surgical and puncture. We studied success rate, tracheal tube insertion time and complications of different techniques, including a novel cricothyrotomy scissors technique in human cadavers. Sixty-three inexperienced health care providers were randomly assigned to apply either an anatomical-surgical technique (standard surgical technique, n=18; novel cricothyrotomy scissors technique, n=14) or a puncture technique (catheter-over-needle technique, n=17; wire-guided technique, n=14). Airway access was almost always successful with the anatomical-surgical techniques (success rate in standard surgical group 94%, scissors group 100%). In contrast, the success rate was smaller (p<0.05) with the puncture techniques (catheter-over-needle group 82%, wire-guided technique 71%). Tracheal tube insertion time was faster overall (p<0.05) with anatomical-surgical techniques (standard surgical 78s [54-135], novel cricothyrotomy scissors technique 60s [42-82]; median [IQR]) than with puncture techniques (catheter-over-needle technique 74s [48-145], wire-guided technique 135s [116-307]). We observed fewer complications with anatomical-surgical techniques than with puncture techniques (p<0.001). In inexperienced health care personnel, anatomical-surgical techniques showed a higher success rate, a faster tracheal tube insertion time and a lower complication rate compared with puncture techniques, suggesting that they may be the techniques of choice in emergencies.

Angular Momentum of a Bose-Einstein Condensate in a Synthetic Rotational Field

NASA Astrophysics Data System (ADS)

Qu, Chunlei; Stringari, Sandro

2018-05-01

By applying a position-dependent detuning to a spin-orbit-coupled Hamiltonian with equal Rashba and Dresselhaus coupling, we exploit the behavior of the angular momentum of a harmonically trapped Bose-Einstein condensed atomic gas and discuss the distinctive role of its canonical and spin components. By developing the formalism of spinor hydrodynamics, we predict the precession of the dipole oscillation caused by the synthetic rotational field, in analogy with the precession of the Foucault pendulum, the excitation of the scissors mode, following the sudden switching off of the detuning, and the occurrence of Hall-like effects. When the detuning exceeds a critical value, we observe a transition from a vortex free, rigidly rotating quantum gas to a gas containing vortices with negative circulation which results in a significant reduction of the total angular momentum.

An unusual intracranial metallic foreign bodies and panhypopituitarism.

PubMed

Lakouichmi, Mohammed; Baïzri, Hicham; Mouhsine, Abdelilah; Boukhira, Abderrahmane; Akhaddar, Ali

2014-01-01

A 49 years old man, with a history of aggression at the age of 18 years by a pair of scissors, who consulted for unilateral migraine headaches look straight. Paraclinical explorations concluded that trauma to anterior pituitary by a metallic foreign body from the right nostril to the sella, responsible for panhypopituitarism and sinusitis. The headaches are frequent causes of consultation, often treated symptomatically but rarely explored. The direct trauma to the pituitary gland, by a metallic foreign body, is exceptional. We report the case of neglected panhypopituitarism, discovered 31 years after injury with a pair of scissors.

An unusual intracranial metallic foreign bodies and panhypopituitarism

PubMed Central

Lakouichmi, Mohammed; Baïzri, Hicham; Mouhsine, Abdelilah; Boukhira, Abderrahmane; Akhaddar, Ali

2014-01-01

A 49 years old man, with a history of aggression at the age of 18 years by a pair of scissors, who consulted for unilateral migraine headaches look straight. Paraclinical explorations concluded that trauma to anterior pituitary by a metallic foreign body from the right nostril to the sella, responsible for panhypopituitarism and sinusitis. The headaches are frequent causes of consultation, often treated symptomatically but rarely explored. The direct trauma to the pituitary gland, by a metallic foreign body, is exceptional. We report the case of neglected panhypopituitarism, discovered 31 years after injury with a pair of scissors. PMID:25667695

How directional mobility affects coexistence in rock-paper-scissors models

NASA Astrophysics Data System (ADS)

Avelino, P. P.; Bazeia, D.; Losano, L.; Menezes, J.; de Oliveira, B. F.; Santos, M. A.

2018-03-01

This work deals with a system of three distinct species that changes in time under the presence of mobility, selection, and reproduction, as in the popular rock-paper-scissors game. The novelty of the current study is the modification of the mobility rule to the case of directional mobility, in which the species move following the direction associated to a larger (averaged) number density of selection targets in the surrounding neighborhood. Directional mobility can be used to simulate eyes that see or a nose that smells, and we show how it may contribute to reduce the probability of coexistence.

How directional mobility affects coexistence in rock-paper-scissors models.

PubMed

Avelino, P P; Bazeia, D; Losano, L; Menezes, J; de Oliveira, B F; Santos, M A

2018-03-01

This work deals with a system of three distinct species that changes in time under the presence of mobility, selection, and reproduction, as in the popular rock-paper-scissors game. The novelty of the current study is the modification of the mobility rule to the case of directional mobility, in which the species move following the direction associated to a larger (averaged) number density of selection targets in the surrounding neighborhood. Directional mobility can be used to simulate eyes that see or a nose that smells, and we show how it may contribute to reduce the probability of coexistence.

Development and effect of a cognitive enhancement gymnastics program for elderly people with dementia

PubMed Central

Han, Yoon-Soo; Araki, Tatsuo; Lee, Pil-Young; Choi, Jung-Hyun; Kwon, In-Seon; Kwon, Ki-Nam; Kim, Ji-Youn

2016-01-01

The purpose of this study was to develop a cognitive enhancement gymnastics program for the elderly with dementia and to verify its effect. The study was conducted on 27 people with dementia being treated in a dementia day care center in Incheon city. No statistically significant differences were found in the measures Mini-Mental State Examination for Dementia Screening (MMSE-DS), Short Geriatric Depression Scale (SGDS), Seoul Activities of Daily Living (S-ADL), or rock-paper-scissors. However, the MMSE-DS and rock-paper-scissors showed improvement after 12 weeks. PMID:27656632

Development of a dual joystick-controlled laser trapping and cutting system for optical micromanipulation of chromosomes inside living cells.

PubMed

Harsono, Marcellinus S; Zhu, Qingyuan; Shi, Linda Z; Duquette, Michelle; Berns, Michael W

2013-02-01

A multi-joystick robotic laser microscope system used to control two optical traps (tweezers) and one laser scissors has been developed for subcellular organelle manipulation. The use of joysticks has provided a "user-friendly" method for both trapping and cutting of organelles such as chromosomes in live cells. This innovative design has enabled the clean severing of chromosome arms using the laser scissors as well as the ability to easily hold and pull the severed arm using the laser tweezers. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Clustering Effect on the Dynamics in a Spatial Rock-Paper-Scissors System

NASA Astrophysics Data System (ADS)

Hashimoto, Tsuyoshi; Sato, Kazunori; Ichinose, Genki; Miyazaki, Rinko; Tainaka, Kei-ichi

2018-01-01

The lattice dynamics for rock-paper-scissors games is related to population theories in ecology. In most cases, simulations are performed by local and global interactions. It is known in the former case that the dynamics is usually stable. We find two types of non-random distributions in the stationary state. One is a cluster formation of endangered species: when the density of a species approaches zero, its clumping degree diverges to infinity. The other is the strong aggregations of high-density species. Such spatial pattern formations play important roles in population dynamics.

Electrosurgery reduces blood loss and immediate postoperative inflammation compared to cold instruments for midline celiotomy in dogs: A randomized controlled trial

PubMed Central

Meakin, Lee B.; Murrell, Jo C.; Doran, Ivan C. P.; Knowles, Toby G.; Tivers, Michael S.

2017-01-01

Abstract Objectives To compare the use of an electrosurgical device with traditional cold instruments (scalpel and scissors) for midline celiotomy incision. Study design Prospective randomized controlled clinical trial. Sample population: One hundred and twenty client‐owned dogs undergoing abdominal surgery. Methods Dogs were prospectively recruited and randomized to receive electroincision or cold instrument incision. For cold incision, surgeons used basic surgical instruments including scalpel and scissors. For electroincision, surgeons only used the electrosurgical device in cutting mode. Time for the approach, blood loss, and the incision length were recorded. A blinded observer assessed pain and incision redness, swelling, and discharge at 24 and 48 hours postoperative (graded 0‐3). Owner assessment of incision healing was recorded by telephone interview. Results Blood loss during surgery was significantly lower for electroincision (mean 0.7, SD 1.7 mL) than cold incision (mean 3.0, SD 4.3 mL, P < .0001) with no significant difference in incision length or time for approach. Electroincision was associated with significantly less incision redness (cold median 1, range 0‐3; electroincision median 0, range 0‐2, P = .02) and less incision discharge (cold median 0.5 range 0‐3; electroincision median 0, range 0‐1, P = .006) at 24 hours postoperative. There was no significant difference in pain scores or incision healing in dogs receiving the two techniques. No incisional hernias were reported. A surgical site infection occurred in 1 dog (cold incision). Conclusions Electroincision for a celiotomy approach in the dog reduces blood loss, and incision redness and discharge in the immediate postoperative period without affecting the occurrence of wound complications such as infection and dehiscence (including linea alba). PMID:28314089

[EFFECTIVENESS COMPARISON OF PROXIMAL FEMORAL NAIL ANTI-ROTATION IN SUPINE "SCISSORS" POSITION AND IN LITHOTOMY POSITION TO TREAT FEMORAL INTERTROCHANTERIC FRACTURES OF OLD PATIENTS].

PubMed

Du, Shihao; Yin, Fei; Wei, Xuming; Song, Sheng; Gu, Sanjun; Sun, Zhenzhong; Rui, Yongjun

2016-02-01

To compare the effectiveness of proximal femoral nail anti-rotation (PFNA) between in the supine "scissors" position and in the lithotomy position for treating femoral intertrochanteric fractures of old patients. A retrospective study was performed on 58 patients with femoral intertrochanteric fractures treated with PFNA between January 2013 and January 2015. Fracture was treated with PFNA in the lithotomy position in 28 cases (group A) and in the supine "scissors" position in 30 cases (group B). There was no significant difference in gender, age, side, cause of injury, fracture type, and interval from injury to operation between 2 groups (P>0.05). The incision length, operation time, perspective times, intraoperative blood loss, complications, and fracture healing time were recorded; Harris hip score was used to access the effectiveness. The wound healed by first intention without infection, pressure sores, deep vein thrombosis of lower extremity, and other complications. There was no significant difference in incision length between 2 groups (t=1.313, P=0.212). Group B was significantly better than group A in operation time, perspective times, and intraoperative blood loss (P<0.05). All patients were followed up 10-31 months (mean, 15.3 months). Stretch injury at normal side and perineal discomfort occurred in 1 case and 5 cases of group A respectively, and no nonunion and other complications was observed in the other patients. There was no significant difference in fracture healing time and Harris hip score at last follow-up between 2 groups (P>0.05). PFNA in the supine "scissors" position has exact effectiveness and advantages of shorter operation time, less intraoperative blood loss, less perspective times, and fewer complications.

Hydrolysis mechanisms of BNPP mediated by facial copper(II) complexes bearing single alkyl guanidine pendants: cooperation between the metal centers and the guanidine pendants.

PubMed

Zhang, Xuepeng; Liu, Xueping; Phillips, David Lee; Zhao, Cunyuan

2016-01-28

The hydrolysis mechanisms of DNA dinucleotide analogue BNPP(-) (bis(p-nitrophenyl) phosphate) catalyzed by mononuclear/dinuclear facial copper(ii) complexes bearing single alkyl guanidine pendants were investigated using density functional theory (DFT) calculations. Active catalyst forms have been investigated and four different reaction modes are proposed accordingly. The [Cu2(L(1))2(μ-OH)](3+) (L(1) is 1-(2-guanidinoethyl)-1,4,7-triazacyclononane) complex features a strong μ-hydroxo mediated antiferromagnetic coupling between the bimetallic centers and the corresponding more stable open-shell singlet state. Three different reaction modes involving two catalysts and a substrate were proposed for L(1) entries and the mode 1 in which an inter-complex nucleophilic attack by a metal bound hydroxide was found to be more favorable. In the L(3)-involved reactions (L(3) is 1-(4-guanidinobutyl)-1,4,7-triazacyclononane), the reaction mode in which an in-plane intracomplex scissoring-like nucleophilic attack by a Cu(ii)-bound hydroxide was found to be more competitive. The protonated guanidine pendants in each proposed mechanism were found to play crucial roles in stabilizing the reaction structures via hydrogen bonds and in facilitating the departure of the leaving group via electrostatic attraction. The calculated results are consistent with the experimental observations that the Cu(ii)-L(3) complexes are hydrolytically more favorable than their L(1)-involved counterparts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blankenship, H.Lee; Thompson, Dan; United States. Bonneville Power Administration. Division of Fish and Wildlife

The first year of work with development of lasers as a mass marking technique provided both disappointing and encouraging results. A Coumarin Dye 480 laser was used to mark coho salmon in a variety of body locations and with varying energy levels. A ``bleached`` white mark was made void of any pigment. Areas marked included the nape area behind the head and in front of the dorsal fin, slightly above the anal fin, the upper lobe of the caudal fin, the dorsal fin and on the operculum. The mark appeared immediately after being lasered but started to gradually fade aftermore » one month and was fairly completely re-pigmented after three months. Complete removal and notching of the adipose fin was also attempted with a Carbon Dioxide laser. This surgical method of fin removal appears to have advantages over scissor excision (no bleeding or regeneration), and has possible application as part of a device or system which could be employed for mass marking.« less

The rock-paper-scissors game

NASA Astrophysics Data System (ADS)

Zhou, Hai-Jun

2016-04-01

Rock-Paper-Scissors (RPS), a game of cyclic dominance, is not merely a popular children's game but also a basic model system for studying decision-making in non-cooperative strategic interactions. Aimed at students of physics with no background in game theory, this paper introduces the concepts of Nash equilibrium and evolutionarily stable strategy, and reviews some recent theoretical and empirical efforts on the non-equilibrium properties of the iterated RPS, including collective cycling, conditional response patterns and microscopic mechanisms that facilitate cooperation. We also introduce several dynamical processes to illustrate the applications of RPS as a simplified model of species competition in ecological systems and price cycling in economic markets.

Cyclic dominance in evolutionary games: a review

PubMed Central

Szolnoki, Attila; Mobilia, Mauro; Jiang, Luo-Luo; Szczesny, Bartosz; Rucklidge, Alastair M.; Perc, Matjaž

2014-01-01

Rock is wrapped by paper, paper is cut by scissors and scissors are crushed by rock. This simple game is popular among children and adults to decide on trivial disputes that have no obvious winner, but cyclic dominance is also at the heart of predator–prey interactions, the mating strategy of side-blotched lizards, the overgrowth of marine sessile organisms and competition in microbial populations. Cyclical interactions also emerge spontaneously in evolutionary games entailing volunteering, reward, punishment, and in fact are common when the competing strategies are three or more, regardless of the particularities of the game. Here, we review recent advances on the rock–paper–scissors (RPS) and related evolutionary games, focusing, in particular, on pattern formation, the impact of mobility and the spontaneous emergence of cyclic dominance. We also review mean-field and zero-dimensional RPS models and the application of the complex Ginzburg–Landau equation, and we highlight the importance and usefulness of statistical physics for the successful study of large-scale ecological systems. Directions for future research, related, for example, to dynamical effects of coevolutionary rules and invasion reversals owing to multi-point interactions, are also outlined. PMID:25232048

Cyclic dominance in evolutionary games: a review.

PubMed

Szolnoki, Attila; Mobilia, Mauro; Jiang, Luo-Luo; Szczesny, Bartosz; Rucklidge, Alastair M; Perc, Matjaž

2014-11-06

Rock is wrapped by paper, paper is cut by scissors and scissors are crushed by rock. This simple game is popular among children and adults to decide on trivial disputes that have no obvious winner, but cyclic dominance is also at the heart of predator-prey interactions, the mating strategy of side-blotched lizards, the overgrowth of marine sessile organisms and competition in microbial populations. Cyclical interactions also emerge spontaneously in evolutionary games entailing volunteering, reward, punishment, and in fact are common when the competing strategies are three or more, regardless of the particularities of the game. Here, we review recent advances on the rock-paper-scissors (RPS) and related evolutionary games, focusing, in particular, on pattern formation, the impact of mobility and the spontaneous emergence of cyclic dominance. We also review mean-field and zero-dimensional RPS models and the application of the complex Ginzburg-Landau equation, and we highlight the importance and usefulness of statistical physics for the successful study of large-scale ecological systems. Directions for future research, related, for example, to dynamical effects of coevolutionary rules and invasion reversals owing to multi-point interactions, are also outlined. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Unifying measurement of Pu 239 ( n , γ ) in the keV to MeV energy regime

DOE PAGES

Mosby, S.; Bredeweg, T. A.; Couture, A.; ...

2018-04-23

A single, unifying measurement of the 239Pu capture cross section from 1 keV to 1.3 MeV has been performed for the first time using the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos Neutron Science Center (LANSCE). The experimental method combines a prior experiment's characterization of prompt fission γ rays in conjunction with a fission tagging detector with a separate experiment using a thick 239Pu sample to extract the neutron capture cross section in ratio to 239Pu (n, f). We have made new predictions of the capture cross section taking into account recent results for the M1more » scissors mode present in other actinides. The results show deviations from current evaluations which are 30% higher at the highest energies, and will be used to improve calculations relevant for several applications.« less

Unifying measurement of 239Pu(n ,γ ) in the keV to MeV energy regime

NASA Astrophysics Data System (ADS)

Mosby, S.; Bredeweg, T. A.; Couture, A.; Jandel, M.; Kawano, T.; Ullmann, J. L.; Henderson, R. A.; Wu, C. Y.

2018-04-01

A single, unifying measurement of the 239Pu capture cross section from 1 keV to 1.3 MeV has been performed for the first time using the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos Neutron Science Center (LANSCE). The experimental method combines a prior experiment's characterization of prompt fission γ rays in conjunction with a fission tagging detector with a separate experiment using a thick 239Pu sample to extract the neutron capture cross section in ratio to 239Pu(n ,f ) . We have made new predictions of the capture cross section taking into account recent results for the M 1 scissors mode present in other actinides. The results show deviations from current evaluations which are 30% higher at the highest energies, and will be used to improve calculations relevant for several applications.

Are the low-lying isovector 1 + states scissors vibrations?

NASA Astrophysics Data System (ADS)

Faessler, A.

At the Technische Hochschule in Darmstadt the group of Richter and coworkers found in 1983/84 in deformed rare earth nuclei low-lying isovector 1 + states. Such states have been predicted in the generalized Bohr-Mottelson model and in the interacting boson model no. 2 (IBA2). In the generalized Bohr-Mottelson model one allows for proton and neutron quadrupole deformations separately. If one includes only static proton and neutron deformations the generalized Bohr-Mottelson model reduces to the two rotor model. It describes the excitation energy of these states in good agreement with the data but overestimates the magnetic dipole transition probabilities by a factor 5. In the interacting boson model (IBA2) where only the outermost nucleons participate in the excitation the magnetic dipole transition probability is only overestimated by a factor 2. The too large collectivity in both models results from the fact that they concentrate the whole strength of the scissors vibrations into one state. A microscopic description is needed to describe the spreading of the scissors strength over several states. For a microscopic determination of these scissors states one uses the Quasi-particle Random Phase Approximation (QRPA). But this approach has a serious difficulty. Since one rotates for the calculation the nucleus into the intrinsic system the state corresponding to the rotation of the whole nucleus is a spurious state. The usual procedure to remove this spuriosity is to use the Thouless theorem which says that a spurious state created by an operator which commutes with the total hamiltonian (here the total angular momentum, corresponding to a rotation of the whole system) produces the spurious state if applied to the ground state. It says further the energy of this spurious state lies at zero excitation energy (it is degenerate with the ground state) and is orthogonal to all physical states. Thus the usual approach is to vary the quadrupole-quadrupole force strength so that a state lies at zero excitation energy and to identify that with the spuríous state. This procedure assumes that a total angular momentum commutes with a total hamiltonian. But this is not the case since the total hamiltonian contains a deformed Saxon-Woods potential. Thus one has to take care explicitly that the spurious state is removed. This we do in our approach by introducing Lagrange multipliers for each excited states and requesting that these states are orthogonal to the spurious state which is explicitly constructed by applying the total angular momentum operator to the ground state. To reduce the number of free parameters in the hamiltonian we take the Saxon-Woods potential for the deformed nuclei from the literature (with minor adjustments) and determine the proton-proton, neutron-neutron and the proton-neutron quadrupole force constant by requesting that the hamiltonian commutes with the total angular momentum in the (QRPA) ground state. This yields equations fixing all three coupling constants for the quadrupole-quadrupole force allowing even for isospin symmetry violation. The spin-spin force is taken from the Reid soft core potential. A possible spin-quadrupole force has been taken from the work of Soloviev but it turns out that this is not important. The calculation shows that the strength of the scissors vibrations are spread over many states. The main 1 + state at around 3 MeV has an overlap of the order of 14 % of the scissors state. 50% of that state are spread over the physical states up to an excitation energy of 6 MeV. The rest is distributed over higher lying states. The expectation value of the many-body hamiltonian in the scissors vibrational state shows roughly an excitation energy of 7 MeV above the ground state. The results also support the experimental findings that these states are mainly orbital excitations. States are not very collective. Normally only a proton and neutron particle-hole pair are with a large amplitude participating in forming these states. But those protons and neutrons which are excited perform scissors type vibrations.

Skin lesion removal

MedlinePlus

... benign; Cryosurgery - skin, benign; BCC - removal; Basal cell cancer - removal; Actinic keratosis - removal; Wart - removal; Squamous cell - removal; Mole - removal; Nevus - removal; Nevi - removal; Scissor ...

Nonlinear dynamics of the rock-paper-scissors game with mutations.

PubMed

Toupo, Danielle F P; Strogatz, Steven H

2015-05-01

We analyze the replicator-mutator equations for the rock-paper-scissors game. Various graph-theoretic patterns of mutation are considered, ranging from a single unidirectional mutation pathway between two of the species, to global bidirectional mutation among all the species. Our main result is that the coexistence state, in which all three species exist in equilibrium, can be destabilized by arbitrarily small mutation rates. After it loses stability, the coexistence state gives birth to a stable limit cycle solution created in a supercritical Hopf bifurcation. This attracting periodic solution exists for all the mutation patterns considered, and persists arbitrarily close to the limit of zero mutation rate and a zero-sum game.

Scissoring Fault Rupture Properties along the Median Tectonic Line Fault Zone, Southwest Japan

NASA Astrophysics Data System (ADS)

Ikeda, M.; Nishizaka, N.; Onishi, K.; Sakamoto, J.; Takahashi, K.

2017-12-01

The Median Tectonic Line fault zone (hereinafter MTLFZ) is the longest and most active fault zone in Japan. The MTLFZ is a 400-km-long trench parallel right-lateral strike-slip fault accommodating lateral slip components of the Philippine Sea plate oblique subduction beneath the Eurasian plate [Fitch, 1972; Yeats, 1996]. Complex fault geometry evolves along the MTLFZ. The geomorphic and geological characteristics show a remarkable change through the MTLFZ. Extensional step-overs and pull-apart basins and a pop-up structure develop in western and eastern parts of the MTLFZ, respectively. It is like a "scissoring fault properties". We can point out two main factors to form scissoring fault properties along the MTLFZ. One is a regional stress condition, and another is a preexisting fault. The direction of σ1 anticlockwise rotate from N170°E [Famin et al., 2014] in the eastern Shikoku to Kinki areas and N100°E [Research Group for Crustral Stress in Western Japan, 1980] in central Shikoku to N85°E [Onishi et al., 2016] in western Shikoku. According to the rotation of principal stress directions, the western and eastern parts of the MTLFZ are to be a transtension and compression regime, respectively. The MTLFZ formed as a terrain boundary at Cretaceous, and has evolved with a long active history. The fault style has changed variously, such as left-lateral, thrust, normal and right-lateral. Under the structural condition of a preexisting fault being, the rupture does not completely conform to Anderson's theory for a newly formed fault, as the theory would require either purely dip-slip motion on the 45° dipping fault or strike-slip motion on a vertical fault. The fault rupture of the 2013 Barochistan earthquake in Pakistan is a rare example of large strike-slip reactivation on a relatively low angle dipping fault (thrust fault), though many strike-slip faults have vertical plane generally [Avouac et al., 2014]. In this presentation, we, firstly, show deep subsurface structures of the MTLFZ based on newly obtained data and previous research results. And then, we discuss how the relationship between the surface fault geometry and the deep subsurface structures changes through the MTLFZ which is under the heterogeneous regional stress condition.

Negative outcomes evoke cyclic irrational decisions in Rock, Paper, Scissors.

PubMed

Dyson, Benjamin James; Wilbiks, Jonathan Michael Paul; Sandhu, Raj; Papanicolaou, Georgios; Lintag, Jaimie

2016-02-04

Rock, Paper, Scissors (RPS) represents a unique gaming space in which the predictions of human rational decision-making can be compared with actual performance. Playing a computerized opponent adopting a mixed-strategy equilibrium, participants revealed a non-significant tendency to over-select Rock. Further violations of rational decision-making were observed using an inter-trial analysis where participants were more likely to switch their item selection at trial n + 1 following a loss or draw at trial n, revealing the strategic vulnerability of individuals following the experience of negative rather than positive outcome. Unique switch strategies related to each of these trial n outcomes were also identified: after losing participants were more likely to 'downgrade' their item (e.g., Rock followed by Scissors) but after drawing participants were more likely to 'upgrade' their item (e.g., Rock followed by Paper). Further repetition analysis revealed that participants were more likely to continue their specific cyclic item change strategy into trial n + 2. The data reveal the strategic vulnerability of individuals following the experience of negative rather than positive outcome, the tensions between behavioural and cognitive influences on decision making, and underline the dangers of increased behavioural predictability in other recursive, non-cooperative environments such as economics and politics.

Automatic imitation in a strategic context: players of rock–paper–scissors imitate opponents' gestures†

PubMed Central

Cook, Richard; Bird, Geoffrey; Lünser, Gabriele; Huck, Steffen; Heyes, Cecilia

2012-01-01

A compelling body of evidence indicates that observing a task-irrelevant action makes the execution of that action more likely. However, it remains unclear whether this ‘automatic imitation’ effect is indeed automatic or whether the imitative action is voluntary. The present study tested the automaticity of automatic imitation by asking whether it occurs in a strategic context where it reduces payoffs. Participants were required to play rock–paper–scissors, with the aim of achieving as many wins as possible, while either one or both players were blindfolded. While the frequency of draws in the blind–blind condition was precisely that expected at chance, the frequency of draws in the blind–sighted condition was significantly elevated. Specifically, the execution of either a rock or scissors gesture by the blind player was predictive of an imitative response by the sighted player. That automatic imitation emerges in a context where imitation reduces payoffs accords with its ‘automatic’ description, and implies that these effects are more akin to involuntary than to voluntary actions. These data represent the first evidence of automatic imitation in a strategic context, and challenge the abstraction from physical aspects of social interaction typical in economic and game theory. PMID:21775334

A genetic approach to the rock-paper-scissors game.

PubMed

Barreto, Wendell P; Marquitti, Flavia M D; de Aguiar, Marcus A M

2017-05-21

Polymorphisms are usually associated with defenses and mating strategies, affecting the individual's fitness. Coexistence of different morphs is, therefore, not expected, since the fittest morph should outcompete the others. Nevertheless, coexistence is observed in many natural systems. For instance, males of the side-blotched lizards (Uta stansburiana) present three morphs with throat colors orange, yellow and blue, which are associated with mating strategies and territorial behavior. The three male morphs compete for females in a system that is well described by the rock-paper-scissors dynamics of game theory. Previous studies have modeled the lizards as hermaphroditic populations whose individual's behavior were determined only by their phenotypes. Here we consider an extension of this dynamical system where diploidy and sexual reproduction are explicitly taken into account. Similarly to the lizards we represent the genetic system by a single locus with three alleles, o, y, and b in a diploid chromosome with dominance of o over y and of y over b. We show that this genotypic description of the dynamics results in the same equilibrium phenotype frequencies as the phenotypic models, but affects the stability of the system, changing the parameter region where coexistence of the three morphs is possible in a rock-paper-scissors game. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of intra-abdominal vasectomy in llamas and alpacas.

PubMed

Bravo, P W; Sumar, J

1991-11-01

A method of intra-abdominal vasectomy (deferentectomy), using a laparoscopic technique in llamas and alpacas, was evaluated. Food was withheld from 14 animals for 24 hours before sedation and laparoscopy. The ductus deferens was located close to the bladder, and a 2- to 3-cm section of ductus deferens was resected with the aid of a pair of hook scissors. The procedure was completed in 5 to 8 minutes, and animals did not have any adverse effects. Forty-five days after vasectomy, animals were used for detecting sexually receptive females or inducing ovulation during reproductive physiologic studies. The procedure did not impair libido and had no effect on male sexual behavior for many years. The technique is simpler, safer, and faster than the traditional external approach.

Anterior capsule tear after laser iridotomy complicating phacoemulsification

PubMed Central

Vivien Cherng Hui, Yip; Sanjay, Srinivasan; Benjamin Chong-Ming, Chang

2011-01-01

A 70-year-old Indian lady had a history of bilateral laser peripheral iridotomy (LPI) for primary angle closure. Subsequently she developed cataract in both the eyes. Right eye cataract surgery was complicated by an anterior capsule rupture, which was discovered intra-operatively at the site of the LPI. Trypan blue was used to stain the anterior capsule to delineate the anterior capsule defect. An attempt at continuous curvilinear capsulorhexis was unsuccessful, and the anterior capsulotomy was completed with scissors. To the best of our knowledge the surgical management of cataract in the presence of anterior capsule rupture as a result of LPI has not been reported. Awareness of this potential complication of LPI will aid in planning for successful phacoemulsification cataract surgery. PMID:23960943

21 CFR 884.1640 - Culdoscope and accessories.

Code of Federal Regulations, 2014 CFR

2014-04-01

... instruments include: lens cleaning brush, biopsy brush, clip applier (without clips), applicator, cannula... (noninflatable), snare, stylet, forceps, dissector, mechanical (noninflatable) scissors, and suction/irrigation...

21 CFR 884.1640 - Culdoscope and accessories.

Code of Federal Regulations, 2012 CFR

2012-04-01

... instruments include: lens cleaning brush, biopsy brush, clip applier (without clips), applicator, cannula... (noninflatable), snare, stylet, forceps, dissector, mechanical (noninflatable) scissors, and suction/irrigation...

21 CFR 884.1640 - Culdoscope and accessories.

Code of Federal Regulations, 2013 CFR

2013-04-01

... instruments include: lens cleaning brush, biopsy brush, clip applier (without clips), applicator, cannula... (noninflatable), snare, stylet, forceps, dissector, mechanical (noninflatable) scissors, and suction/irrigation...

New application of a bipolar Nd:YAG handpiece in laser cardiac surgery

NASA Astrophysics Data System (ADS)

Mizutani, Tetsuo; Suzuki, Hitoshi; Katayama, Yoshihiko

1997-05-01

A bipolar Nd-YAG laser (1.064 micrometer) handpiece was experimentally examined for a venous dissection without scissors and sutures and clinically introduced for the vein graft harvesting in coronary artery bypass grafting (CABG). Experimental study: One hundred and thirty-five segments of the mongrel dog veins were employed. Nd-YAG laser was irradiated on the vein held by the bipolar Nd-YAG handpiece at the power of 5, 9, 13, and 17 watts, and success defined as a complete vein citing without bleeding at the laser-applied sites were gained in all except three; 97.8% of success rate. Laser exposure time for cutting the vein decreased in order to an increase of the applied laser power, and the veins of bigger diameter needed more longer exposure time in the group of the same laser power. An average exposure time was 4.4 seconds for the veins of 1 mm diameter at 13 watts. In histological examination, a vascular lumen at the cutting site was diminished and covered with a degenerated vascular wall, and bleeding was not seen in all specimen. Clinical study: In 18 cases of CABG the bipolar Nd-YAG handpiece was applied to cut the branches of the great saphenous vein without scissors and sutures. Forty-two grafts harvested by this handpiece were used for aortocoronary bypass grating. All were survived and the angiographic examination demonstrated a 90% of graft patency at an average period of 3.5 years after the operation. Laser-induced morphological change such as aneurysmal formation or graft stenosis was not recognized.

Students Learning Physics While Lifting Themselves: A Simple Analysis of a Scissors Jack

NASA Astrophysics Data System (ADS)

Haugland, Ole Anton

2017-02-01

Every time I have to jack up my car, I am a bit surprised by how slowly the scissors jack works the higher I raise it, and close to maximum height I need very little force to turn the crank. This agrees well with the principle of simple machines. Since I have to jack up my car at least twice a year to change between winter tires and summer tires, I thought it was time to take a closer look at the physics behind the process. And like most physics teachers, I am always looking for new ideas for my teaching. In this note I will present a few ideas on how a jack can be a topic in physics teaching.

Zealots tame oscillations in the spatial rock-paper-scissors game

NASA Astrophysics Data System (ADS)

Szolnoki, Attila; Perc, Matjaž

2016-06-01

The rock-paper-scissors game is a paradigmatic model for biodiversity, with applications ranging from microbial populations to human societies. Research has shown, however, that mobility jeopardizes biodiversity by promoting the formation of spiral waves, especially if there is no conservation law in place for the total number of competing players. First, we show that even if such a conservation law applies, mobility still jeopardizes biodiversity in the spatial rock-paper-scissors game if only a small fraction of links of the square lattice is randomly rewired. Secondly, we show that zealots are very effective in taming the amplitude of oscillations that emerge due to mobility and/or interaction randomness, and this regardless of whether the later is quenched or annealed. While even a tiny fraction of zealots brings significant benefits, at 5% occupancy zealots practically destroy all oscillations regardless of the intensity of mobility, and regardless of the type and strength of randomness in the interaction structure. Interestingly, by annealed randomness the impact of zealots is qualitatively the same as by mobility, which highlights that fast diffusion does not necessarily destroy the coexistence of species, and that zealotry thus helps to recover the stable mean-field solution. Our results strengthen the important role of zealots in models of cyclic dominance, and they reveal fascinating evolutionary outcomes in structured populations that are a unique consequence of such uncompromising behavior.

SMART micro-scissors with dual motors and OCT sensors (Conference Presentation)

NASA Astrophysics Data System (ADS)

Yeo, Chaebeom; Jang, Seonjin; Park, Hyun-cheol; Gehlbach, Peter L.; Song, Cheol

2017-02-01

Various end-effectors of microsurgical instruments have been developed and studied. Also, many approaches to stabilize the tool-tip using robotics have been studied such as the steady hand robot system, Micron, and SMART system. In our previous study, the horizontal SMART micro-scissors with a common path swept source OCT distance and one linear piezoelectric (PZT) motor was demonstrated as a microsurgical system. Because the outer needle is connected with a mechanical handle and moved to engage the tool tip manually, the tool tip position is instantaneously changed during the engaging. The undesirable motion can make unexpected tissue damages and low surgical accuracy. In this study, we suggest a prototype horizontal SMART micro-scissors which has dual OCT sensors and two motors to improve the tremor cancellation. Dual OCT sensors provide two distance information. Front OCT sensor detects a distance from the sample surface to the tool tip. Rear OCT sensors gives current PZT motor movement, acting like a motor encoder. The PZT motor can compensate the hand tremor with a feedback loop control. The manual engaging of tool tip in previous SMART system is replaced by electrical engaging using a squiggle motor. Compared with previous study, this study showed better performance in the hand tremor reduction. From the result, the SMART with automatic engaging may become increasingly valuable in microsurgical instruments.

21 CFR 888.4540 - Orthopedic manual surgical instrument.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench. (b) Classification...

21 CFR 888.4540 - Orthopedic manual surgical instrument.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench. (b) Classification...

21 CFR 888.4540 - Orthopedic manual surgical instrument.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench. (b) Classification...

21 CFR 888.4540 - Orthopedic manual surgical instrument.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench. (b) Classification...

21 CFR 888.4540 - Orthopedic manual surgical instrument.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench. (b) Classification...

Forced oral opening for cadavers with rigor mortis: two approaches for the myotomy on the temporal muscles.

PubMed

Nakayama, Y; Aoki, Y; Niitsu, H; Saigusa, K

2001-04-15

Forensic dentistry plays an essential role in personal identification procedures. An adequate interincisal space of cadavers with rigor mortis is required to obtain detailed dental findings. We have developed intraoral and two directional approaches, for myotomy of the temporal muscles. The intraoral approach, in which the temporalis was dissected with scissors inserted via an intraoral incision, was adopted for elderly cadavers, females and emaciated or exhausted bodies, and had a merit of no incision on the face. The two directional approach, in which myotomy was performed with thread-wire saw from behind and with scissors via the intraoral incision, was designed for male muscular youths. Both approaches were effective to obtain a desired degree of an interincisal opening without facial damage.

Improving a scissor-action couch for conformal arc radiotherapy and radiosurgery.

PubMed

Li, Kaile; Yu, Cedric X; Ma, Lijun

2004-01-01

We have developed a method to improve the setup accuracy of a Varian Clinac 6/100 couch for delivering conformal arc therapy using a tertiary micro multileaf collimator (MLC) system. Several immobilization devices have been developed to improve the mechanical stability and isocenter alignment of the couch: turn-knob harnesses, double-track alignment plates, and a drop-in rod that attaches the couch to the concrete floor. These add-on components minimize the intercomponent motion of the couch's scissor elevator, which allows consistent treatment setup. The accuracy of our isocenter couch alignment is an improvement over the above devices, within 1 mm of their accuracy. The couch has been used with over 15 patients and with over 50 modulated conformal arc treatment deliveries at our institution.

Cuts and puncture wounds

MedlinePlus

... pointed object such as a nail, knife, or sharp tooth. Symptoms Symptoms include: Bleeding Problems with function ... the last 10 years. Prevention Keep knives, scissors, sharp objects, firearms, and fragile items out of the ...

Virts on MDDK

NASA Image and Video Library

2010-02-15

S130-E-008276 (15 Feb. 2010) --- NASA astronaut Terry Virts, STS-130 pilot, is pictured near food packages and scissors floating freely on the middeck of space shuttle Endeavour while docked with the International Space Station.

Cycle frequency in standard Rock-Paper-Scissors games: Evidence from experimental economics

NASA Astrophysics Data System (ADS)

Xu, Bin; Zhou, Hai-Jun; Wang, Zhijian

2013-10-01

The Rock-Paper-Scissors (RPS) game is a widely used model system in game theory. Evolutionary game theory predicts the existence of persistent cycles in the evolutionary trajectories of the RPS game, but experimental evidence has remained to be rather weak. In this work, we performed laboratory experiments on the RPS game and analyzed the social-state evolutionary trajectories of twelve populations of N=6 players. We found strong evidence supporting the existence of persistent cycles. The mean cycling frequency was measured to be 0.029±0.009 period per experimental round. Our experimental observations can be quantitatively explained by a simple non-equilibrium model, namely the discrete-time logit dynamical process with a noise parameter. Our work therefore favors the evolutionary game theory over the classical game theory for describing the dynamical behavior of the RPS game.

Apex predator and the cyclic competition in a rock-paper-scissors game of three species

NASA Astrophysics Data System (ADS)

Souza-Filho, C. A.; Bazeia, D.; Ramos, J. G. G. S.

2017-06-01

This work deals with the effects of an apex predator on the cyclic competition among three distinct species that follow the rules of the rock-paper-scissors game. The investigation develops standard stochastic simulations but is motivated by a procedure which is explained in the work. We add the apex predator as the fourth species in a system that contains three species that evolve following the standard rules of migration, reproduction, and predation, and study how the system evolves in this new environment, in comparison with the case in the absence of the apex predator. The results show that the apex predator engenders the tendency to spread uniformly in the lattice, contributing to destroy the spiral patterns, keeping biodiversity but diminishing the average size of the clusters of the species that compete cyclically.

Identifying the first folded alkylbenzene via ultraviolet, infrared, and Raman spectroscopy of pentylbenzene through decylbenzene

DOE PAGES

Hewett, Daniel M.; Bocklitz, Sebastian; Tabor, Daniel P.; ...

2017-05-23

The conformational preferences of pentyl- through decylbenzene are studied under jet-cooled conditions in the gas phase. Laser-induced fluorescence excitation spectra, fluorescence-dip infrared spectra in the alkyl CH stretch region, and Raman spectra are combined to provide assignments for the observed conformers. Density functional theory calculations at the B3LYP-D3BJ/def2TZVP level of theory provide relative energies and normal mode vibrations that serve as inputs for an anharmonic local mode theory introduced in earlier work on alkylbenzenes with n = 2–4. This model explicitly includes anharmonic mixing of the CH stretch modes with the overtones of scissors/bend modes of the CH 2 andmore » CH 3 groups in the alkyl chain, and is used to assign and interpret the single-conformation IR spectra. In octylbenzene, a pair of LIF transitions shifted -92 and -78 cm -1 from the all-trans electronic origin have unique alkyl CH stretch transitions that are fit by the local model to a g1g3g4 conformation in which the alkyl chain folds back over the aromatic ring π cloud. Its calculated energy is only 1.0 kJ mol -1 above the all-trans global minimum. This fold is at an alkyl chain length less than half that of the pure alkanes (n = 18), consistent with a smaller energy cost for the g1 dihedral and the increased dispersive interaction of the chain with the π cloud. Local site frequencies for the entire set of conformers from the local mode model show ‘edge effects’ that raise the site frequencies of CH 2(1) and CH 2(2) due to the phenyl ring and CH 2(n - 1) due to the methyl group. The g1g3g4 conformer also shows local sites shifted up in frequency at CH 2(3) and CH 2(6) due to interaction with the π cloud.« less

KSC-2014-3909

NASA Image and Video Library

2014-09-12

CAPE CANAVERAL, Fla. – Inside the Horizontal Integration Facility at Space Launch Complex 37 at Cape Canaveral Air Force Station in Florida, a United Launch Alliance technician on a scissor lift watches as mating of the second stage of a Delta IV Heavy rocket to the core booster of the three booster stages is nearly complete. The rocket will launch the unpiloted Exploration Flight Test-1, or EFT-1. During the mission, Orion will travel farther into space than any human spacecraft has gone in more than 40 years. The data gathered during the flight will influence design decisions, validate existing computer models and innovative new approaches to space systems development, as well as reduce overall mission risks and costs for later Orion flights. Liftoff of Orion on the first flight test is planned for December 2014. Photo credit: NASA/Daniel Casper

Teflon haemoptysis.

PubMed

Aboudara, Matthew; Krimsky, William; Harley, Daniel

2012-03-20

Teflon-coated pledgeted sutures can be used to reinforce the bronchial anastomosis site following a pulmonary resection in order to prevent bronchopleural fistula formation. The authors describe the case of a 42-year-old woman with recurrent haemoptysis secondary to the erosion of a pledgeted suture through the distal trachea. The pledgeted suture was used to reinforce a defect in the wall of the distal trachea after a right upper lobectomy for stage 2a squamous cell carcinoma. Surgically, a completion pneumonectomy with carinal reconstruction was thought necessary to treat the haemoptysis. Given her age and potential surgical morbidities, the decision was made to perform serial bronchoscopies with careful pruning and eventual removal of the pledget by using the cryoprobe and a flexible scissors. This resulted in the eventual removal of the suture. Follow-up bronchoscopy 4 weeks postremoval demonstrated no residual defect on the airway wall.

Teflon haemoptysis

PubMed Central

Aboudara, Matthew; Krimsky, William; Harley, Daniel

2012-01-01

Teflon-coated pledgeted sutures can be used to reinforce the bronchial anastomosis site following a pulmonary resection in order to prevent bronchopleural fistula formation. The authors describe the case of a 42-year-old woman with recurrent haemoptysis secondary to the erosion of a pledgeted suture through the distal trachea. The pledgeted suture was used to reinforce a defect in the wall of the distal trachea after a right upper lobectomy for stage 2a squamous cell carcinoma. Surgically, a completion pneumonectomy with carinal reconstruction was thought necessary to treat the haemoptysis. Given her age and potential surgical morbidities, the decision was made to perform serial bronchoscopies with careful pruning and eventual removal of the pledget by using the cryoprobe and a flexible scissors. This resulted in the eventual removal of the suture. Follow-up bronchoscopy 4 weeks postremoval demonstrated no residual defect on the airway wall. PMID:22605709

Food packages for use on the Gemini 4 flight

NASA Technical Reports Server (NTRS)

1965-01-01

Food packages for use on the Gemini 4 flight. Packages include beef and gravy, peaches, strawberry cereal cubes and beef sandwiches. Water gun is used to reconstitute dehydrated food. Scissors are used to open the packages.

Heterogeneous network promotes species coexistence: metapopulation model for rock-paper-scissors game.

PubMed

Nagatani, Takashi; Ichinose, Genki; Tainaka, Kei-Ichi

2018-05-04

Understanding mechanisms of biodiversity has been a central question in ecology. The coexistence of three species in rock-paper-scissors (RPS) systems are discussed by many authors; however, the relation between coexistence and network structure is rarely discussed. Here we present a metapopulation model for RPS game. The total population is assumed to consist of three subpopulations (nodes). Each individual migrates by random walk; the destination of migration is randomly determined. From reaction-migration equations, we obtain the population dynamics. It is found that the dynamic highly depends on network structures. When a network is homogeneous, the dynamics are neutrally stable: each node has a periodic solution, and the oscillations synchronize in all nodes. However, when a network is heterogeneous, the dynamics approach stable focus and all nodes reach equilibriums with different densities. Hence, the heterogeneity of the network promotes biodiversity.

A portable fracture toughness tester for biological materials

NASA Astrophysics Data System (ADS)

Darvell, B. W.; Lee, P. K. D.; Yuen, T. D. B.; Lucas, P. W.

1996-06-01

A portable mechanical tester is described which is both lightweight and cheap to produce. The machine is simple and convenient to operate and requires only a minimum of personnel training. It can be used to measure the fundamental mechanical properties of pliant solids, particularly toughness (in the sense of `work of fracture') using either scissors or wedge tests. This is achieved through a novel hardware integration technique. The circuits are described. The use of the machine does not require a chart recorder but it can be linked to a personal computer, either to show force - displacement relationships or for data storage. The design allows the use of any relatively `soft' mechanical test, i.e. tests in which the deformability of the frame of the machine and its load cell do not introduce significant errors into the results. Examples of its use in measuring the toughness of biomaterials by scissors (paper, wood) and wedges (mung bean starch gels) are given.

Mining machine with adjustable jib

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, D.

1987-05-26

A mining machine is described having a pair of crawler tracks, a means for individually driving each of the crawler tracks, a frame mounted on the crawler tracks, an elongated jib carrying a sprocket at each end, an endless cutting chain supported on the sprockets, cutters and loading flights mounted on the endless cutting chain, and means on the frame supporting the elongated jib. The means support the elongated jib consisting of a bridge on the frame, at least one scissors linkage pivotally mounted on the bridge, and arm having a first end attached to the scissors linkage, a frontmore » plate mounted on the second end of the arm and means adjustably mounting the elongated jib on the front plate. The means adjustably mount the elongated jib on the front plate including a first means for rotating the elongated jib between a vertical position and a horizontal position.« less

Spatial pattern dynamics due to the fitness gradient flux in evolutionary games.

PubMed

deForest, Russ; Belmonte, Andrew

2013-06-01

We introduce a nondiffusive spatial coupling term into the replicator equation of evolutionary game theory. The spatial flux is based on motion due to local gradients in the relative fitness of each strategy, providing a game-dependent alternative to diffusive coupling. We study numerically the development of patterns in one dimension (1D) for two-strategy games including the coordination game and the prisoner's dilemma, and in two dimensions (2D) for the rock-paper-scissors game. In 1D we observe modified traveling wave solutions in the presence of diffusion, and asymptotic attracting states under a frozen-strategy assumption without diffusion. In 2D we observe spiral formation and breakup in the frozen-strategy rock-paper-scissors game without diffusion. A change of variables appropriate to replicator dynamics is shown to correctly capture the 1D asymptotic steady state via a nonlinear diffusion equation.

Limit cycles and the benefits of a short memory in rock-paper-scissors games.

PubMed

Burridge, James

2015-10-01

When playing games in groups, it is an advantage for individuals to have accurate statistical information on the strategies of their opponents. Such information may be obtained by remembering previous interactions. We consider a rock-paper-scissors game in which agents are able to recall their last m interactions, used to estimate the behavior of their opponents. At critical memory length, a Hopf bifurcation leads to the formation of stable limit cycles. In a mixed population, agents with longer memories have an advantage, provided the system has a stable fixed point, and there is some asymmetry in the payoffs of the pure strategies. However, at a critical concentration of long memory agents, the appearance of limit cycles destroys their advantage. By introducing population dynamics that favors successful agents, we show that the system evolves toward the bifurcation point.

Limit cycles and the benefits of a short memory in rock-paper-scissors games

NASA Astrophysics Data System (ADS)

Burridge, James

2015-10-01

When playing games in groups, it is an advantage for individuals to have accurate statistical information on the strategies of their opponents. Such information may be obtained by remembering previous interactions. We consider a rock-paper-scissors game in which agents are able to recall their last m interactions, used to estimate the behavior of their opponents. At critical memory length, a Hopf bifurcation leads to the formation of stable limit cycles. In a mixed population, agents with longer memories have an advantage, provided the system has a stable fixed point, and there is some asymmetry in the payoffs of the pure strategies. However, at a critical concentration of long memory agents, the appearance of limit cycles destroys their advantage. By introducing population dynamics that favors successful agents, we show that the system evolves toward the bifurcation point.

Correction of a mutilated dentition with mini-implants as anchorage.

PubMed

Hyun, Jae-Man; Kim, Tae-Woo

2010-11-01

The patient was an adolescent boy, aged 15.6 years, with a mutilated dentition. He had extrusion of the maxillary left first molar because of loss of the mandibular first molar and lingual tilting and rotation of the mandibular second molars. Both left and right second molars were in scissors-bite that was more severe on the left side. By using mini-implants and a TPA with hooks, a 3-mm intrusion was successfully made on the maxillary left first molar. This provided room for mesial movement of the mandibular left second molar. The second molar was protracted into the space of the missing first molar, and the mandibular left third molar was positioned in place of the second molar. The second molars scissors-bite was corrected. Active treatment took 45 months, and the treatment result remained stable 2 years after debonding. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Spatial pattern dynamics due to the fitness gradient flux in evolutionary games

NASA Astrophysics Data System (ADS)

deForest, Russ; Belmonte, Andrew

2013-06-01

We introduce a nondiffusive spatial coupling term into the replicator equation of evolutionary game theory. The spatial flux is based on motion due to local gradients in the relative fitness of each strategy, providing a game-dependent alternative to diffusive coupling. We study numerically the development of patterns in one dimension (1D) for two-strategy games including the coordination game and the prisoner's dilemma, and in two dimensions (2D) for the rock-paper-scissors game. In 1D we observe modified traveling wave solutions in the presence of diffusion, and asymptotic attracting states under a frozen-strategy assumption without diffusion. In 2D we observe spiral formation and breakup in the frozen-strategy rock-paper-scissors game without diffusion. A change of variables appropriate to replicator dynamics is shown to correctly capture the 1D asymptotic steady state via a nonlinear diffusion equation.

Hamming distance and mobility behavior in generalized rock-paper-scissors models

NASA Astrophysics Data System (ADS)

Bazeia, D.; Menezes, J.; de Oliveira, B. F.; Ramos, J. G. G. S.

2017-09-01

This work reports on two related investigations of stochastic simulations which are widely used to study biodiversity and other related issues. We first deal with the behavior of the Hamming distance under the increase of the number of species and the size of the lattice, and then investigate how the mobility of the species contributes to jeopardize biodiversity. The investigations are based on the standard rules of reproduction, mobility and predation or competition, which are described by specific rules, guided by generalization of the rock-paper-scissors game, valid in the case of three species. The results on the Hamming distance indicate that it engenders universal behavior, independently of the number of species and the size of the square lattice. The results on the mobility confirm the prediction that it may destroy diversity, if it is increased to higher and higher values.

Food mechanical properties and dietary ecology.

PubMed

Berthaume, Michael A

2016-01-01

Interdisciplinary research has benefitted the fields of anthropology and engineering for decades: a classic example being the application of material science to the field of feeding biomechanics. However, after decades of research, discordances have developed in how mechanical properties are defined, measured, calculated, and used due to disharmonies between and within fields. This is highlighted by "toughness," or energy release rate, the comparison of incomparable tests (i.e., the scissors and wedge tests), and the comparison of incomparable metrics (i.e., the stress and displacement-limited indices). Furthermore, while material scientists report on a myriad of mechanical properties, it is common for feeding biomechanics studies to report on just one (energy release rate) or two (energy release rate and Young's modulus), which may or may not be the most appropriate for understanding feeding mechanics. Here, I review portions of materials science important to feeding biomechanists, discussing some of the basic assumptions, tests, and measurements. Next, I provide an overview of what is mechanically important during feeding, and discuss the application of mechanical property tests to feeding biomechanics. I also explain how 1) toughness measures gathered with the scissors, wedge, razor, and/or punch and die tests on non-linearly elastic brittle materials are not mechanical properties, 2) scissors and wedge tests are not comparable and 3) the stress and displacement-limited indices are not comparable. Finally, I discuss what data gathered thus far can be best used for, and discuss the future of the field, urging researchers to challenge underlying assumptions in currently used methods to gain a better understanding between primate masticatory morphology and diet. © 2016 Wiley Periodicals, Inc.

Small incision iris tumour biopsy using a cavernous sampling forceps.

PubMed

Chronopoulos, Argyrios; Kilic, Ergin; Joussen, Antonia M; Lipski, Andreas

2014-11-01

The aim of this retrospective report is to describe our experience with the Essen-23G biopsy forceps (Akgül forceps) for biopsies of pigmented iris tumours. In this retrospective study of cases between October 2012 and September 2013, patients with iris tumours and clinical signs for malignancy underwent biopsy to secure the diagnosis. The Essen-23G-forceps was used to grasp and extract tissue through a clear corneal incision. Eventual entry and bimanual manipulation with a 23G mini-scissors was achieved through a second incision. Tissue samples were fixed in a sterile tube for further histopathological and immunohistochemical evaluation. Seven eyes of seven patients underwent biopsy using the forceps. The average thickness of the iris tumours was 1.07±0.79 mm. A second corneal incision for scissoring in a bimanual technique was necessary in 5 cases (71%). In 6 cases (85%), a precise histological and immunohistochemical diagnosis was achieved. Complications were limited to minute bleeding at the biopsy site and one case of relative pupil enlargement (anisocoria) without further refractive issues. Iris tumour biopsies can be successfully approached using a cavernous 23G intraocular forceps with a low risk for procedure-related complications. The conical interior design allows for removal of whole tissue pieces with minimal manipulative artefacts. An optional bimanual access through a second corneal incision and use of a 23G scissors provides better efficacy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Erythromycin and Benzoyl Peroxide Topical

MedlinePlus

... on to step 5. If your medication comes in small pouches, use scissors or your fingers to tear off the top at the notched tab. Do not open the pouch with your teeth. Squeeze the contents of the pouch onto your ...

Mission Specialist (MS) Lenoir cuts Pilot Overmyer's hair on middeck

NASA Technical Reports Server (NTRS)

1982-01-01

Mission Specialist (MS) Lenoir, using hairbrush and scissors, cuts Pilot Overmyer's hair and trims his sideburns in front of forward middeck lockers. Personal hygiene kit (open), towels, and field sequential (FS) crew cabin camera are attached to lockers.

The Hooey Machine.

ERIC Educational Resources Information Center

Scarnati, James T.; Tice, Craig J.

1992-01-01

Describes how students can make and use Hooey Machines to learn how mechanical energy can be transferred from one object to another within a system. The Hooey Machine is made using a pencil, eight thumbtacks, one pushpin, tape, scissors, graph paper, and a plastic lid. (PR)

Wakata haircut in the Service Module (SM)

NASA Image and Video Library

2009-04-04

ISS018-E-044607 (4 April 2009) --- Japan Aerospace Exploration Agency (JAXA) astronaut Koichi Wakata, Expedition 18/19 flight engineer, returns scissors and hair clippers to their storage bag after trimming his hair in the Zarya module of the International Space Station.

Selective loss of polymorphic mating types is associated with rapid phenotypic evolution during morphic speciation.

PubMed

Corl, Ammon; Davis, Alison R; Kuchta, Shawn R; Sinervo, Barry

2010-03-02

Polymorphism may play an important role in speciation because new species could originate from the distinctive morphs observed in polymorphic populations. However, much remains to be understood about the process by which morphs found new species. To detail the steps of this mode of speciation, we studied the geographic variation and evolutionary history of a throat color polymorphism that distinguishes the "rock-paper-scissors" mating strategies of the side-blotched lizard, Uta stansburiana. We found that the polymorphism is geographically widespread and has been maintained for millions of years. However, there are many populations with reduced numbers of throat color morphs. Phylogenetic reconstruction showed that the polymorphism is ancestral, but it has been independently lost eight times, often giving rise to morphologically distinct subspecies/species. Changes to the polymorphism likely involved selection because the allele for one particular male strategy, the "sneaker" morph, has been lost in all cases. Polymorphism loss was associated with accelerated evolution of male size, female size, and sexual dimorphism, which suggests that polymorphism loss can promote rapid divergence among populations and aid species formation.

Easy sellar reconstruction in endoscopic endonasal transsphenoidal surgery with polyester-silicone dural substitute and fibrin glue: technical note.

PubMed

Cappabianca, P; Cavallo, L M; Mariniello, G; de Divitiis, O; Romero, A D; de Divitiis, E

2001-08-01

To describe a simple method of sellar reconstruction after endoscopic endonasal transsphenoidal surgery that will allow rapid watertight closure of the sellar floor. A bent sheet of a polyester-silicone dural substitute, fashioned for this purpose with scissors, is introduced into the sella after removal of the lesion. Because of the consistency of the sheet, it opens spontaneously and becomes stuck. Autologous fat tissue or gelatin foam is positioned thereafter, followed by another layer of the dural substitute; a film of fibrin glue completes the sealing. Fifteen patients underwent this method and no postoperative cerebrospinal leak or other complication was experienced. This easy method of sellar reconstruction represents an effective and fast possibility to perform the final step of the endoscopic transsphenoidal procedure, which otherwise may cause maneuverability problems in the limited space of one nostril.

Complete spinal cord injury and brain dissection protocol for subsequent wholemount in situ hybridization in larval sea lamprey.

PubMed

Barreiro-Iglesias, Antón; Zhang, Guixin; Selzer, Michael E; Shifman, Michael I

2014-10-14

After a complete spinal cord injury, sea lampreys at first are paralyzed below the level of transection. However, they recover locomotion after several weeks, and this is accompanied by short distance regeneration (a few mm) of propriospinal axons and spinal-projecting axons from the brainstem. Among the 36 large identifiable spinal-projecting neurons, some are good regenerators and others are bad regenerators. These neurons can most easily be identified in wholemount CNS preparations. In order to understand the neuron-intrinsic mechanisms that favor or inhibit axon regeneration after injury in the vertebrates CNS, we determine differences in gene expression between the good and bad regenerators, and how expression is influenced by spinal cord transection. This paper illustrates the techniques for housing larval and recently transformed adult sea lampreys in fresh water tanks, producing complete spinal cord transections under microscopic vision, and preparing brain and spinal cord wholemounts for in situ hybridization. Briefly, animals are kept at 16°C and anesthetized in 1% Benzocaine in lamprey Ringer. The spinal cord is transected with iridectomy scissors via a dorsal approach and the animal is allowed to recover in fresh water tanks at 23 °C. For in situ hybridization, animals are reanesthetized and the brain and cord removed via a dorsal approach.

Mission Specialist (MS) Lenoir cuts Pilot Overmyer's hair on middeck

NASA Technical Reports Server (NTRS)

1982-01-01

Mission Specialist (MS) Lenoir, using hairbrush and scissors, cuts Pilot Overmyer's hair and trims his sideburns in front of forward middeck lockers. Personal hygiene kit (open), towels, meal tray assemblies, and field sequential (FS) crew cabincamera are attached to lockers.

Wakata haircut in the Service Module (SM)

NASA Image and Video Library

2009-04-04

ISS018-E-044602 (4 April 2009) --- Japan Aerospace Exploration Agency (JAXA) astronaut Koichi Wakata, Expedition 18/19 flight engineer, trims his hair in the Zarya module of the International Space Station, using scissors and a vacuum device to garner freshly cut hair.

Boxing Up a Mini Herd: Art Put to Pasture.

ERIC Educational Resources Information Center

Zimmerman, Midge

2002-01-01

Presents an art project for high school students that was inspired by the 1999 "Cows on Parade" exhibition in Chicago (Illinois). Explains that students used old Gateway computer boxes to create their own cows using the box, scissors, and a hot-glue gun. (CMK)

Emergence of unusual coexistence states in cyclic game systems.

PubMed

Park, Junpyo; Do, Younghae; Jang, Bongsoo; Lai, Ying-Cheng

2017-08-07

Evolutionary games of cyclic competitions have been extensively studied to gain insights into one of the most fundamental phenomena in nature: biodiversity that seems to be excluded by the principle of natural selection. The Rock-Paper-Scissors (RPS) game of three species and its extensions [e.g., the Rock-Paper-Scissors-Lizard-Spock (RPSLS) game] are paradigmatic models in this field. In all previous studies, the intrinsic symmetry associated with cyclic competitions imposes a limitation on the resulting coexistence states, leading to only selective types of such states. We investigate the effect of nonuniform intraspecific competitions on coexistence and find that a wider spectrum of coexistence states can emerge and persist. This surprising finding is substantiated using three classes of cyclic game models through stability analysis, Monte Carlo simulations and continuous spatiotemporal dynamical evolution from partial differential equations. Our finding indicates that intraspecific competitions or alternative symmetry-breaking mechanisms can promote biodiversity to a broader extent than previously thought.

Zealotry promotes coexistence in the rock-paper-scissors model of cyclic dominance

NASA Astrophysics Data System (ADS)

Verma, Gunjan; Chan, Kevin; Swami, Ananthram

2015-11-01

Cyclic dominance models, such as the classic rock-paper-scissors (RPS) game, have found real-world applications in biology, ecology, and sociology. A key quantity of interest in such models is the coexistence time, i.e., the time until at least one population type goes extinct. Much recent research has considered conditions that lengthen coexistence times in an RPS model. A general finding is that coexistence is promoted by localized spatial interactions (low mobility), while extinction is fostered by global interactions (high mobility). That is, there exists a mobility threshold which separates a regime of long coexistence from a regime of rapid collapse of coexistence. The key finding of our paper is that if zealots (i.e., nodes able to defeat others while themselves being immune to defeat) of even a single type exist, then system coexistence time can be significantly prolonged, even in the presence of global interactions. This work thus highlights a crucial determinant of system survival time in cyclic dominance models.

Genome editing: the road of CRISPR/Cas9 from bench to clinic

PubMed Central

Eid, Ayman; Mahfouz, Magdy M

2016-01-01

Molecular scissors engineered for site-specific modification of the genome hold great promise for effective functional analyses of genes, genomes and epigenomes and could improve our understanding of the molecular underpinnings of disease states and facilitate novel therapeutic applications. Several platforms for molecular scissors that enable targeted genome engineering have been developed, including zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and, most recently, clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR-associated-9 (Cas9). The CRISPR/Cas9 system's simplicity, facile engineering and amenability to multiplexing make it the system of choice for many applications. CRISPR/Cas9 has been used to generate disease models to study genetic diseases. Improvements are urgently needed for various aspects of the CRISPR/Cas9 system, including the system's precision, delivery and control over the outcome of the repair process. Here, we discuss the current status of genome engineering and its implications for the future of biological research and gene therapy. PMID:27741224

The rock-paper-scissors game and the evolution of alternative male strategies

NASA Astrophysics Data System (ADS)

Sinervo, B.; Lively, C. M.

1996-03-01

MANY species exhibit colour polymorphisms associated with alternative male reproductive strategies, including territorial males and 'sneaker males' that behave and look like females1-3. The prevalence of multiple morphs is a challenge to evolutionary theory because a single strategy should prevail unless morphs have exactly equal fitness4,5 or a fitness advantage when rare6,7. We report here the application of an evolutionary stable strategy model to a three-morph mating system in the side-blotched lizard. Using parameter estimates from field data, the model predicted oscillations in morph frequency, and the frequencies of the three male morphs were found to oscillate over a six-year period in the field. The fitnesses of each morph relative to other morphs were non-transitive in that each morph could invade another morph when rare, but was itself invadable by another morph when common. Concordance between frequency-dependent selection and the among-year changes in morph fitnesses suggest that male interactions drive a dynamic 'rock-paper-scissors' game7.

Four-state rock-paper-scissors games in constrained Newman-Watts networks.

PubMed

Zhang, Guo-Yong; Chen, Yong; Qi, Wei-Kai; Qing, Shao-Meng

2009-06-01

We study the cyclic dominance of three species in two-dimensional constrained Newman-Watts networks with a four-state variant of the rock-paper-scissors game. By limiting the maximal connection distance Rmax in Newman-Watts networks with the long-range connection probability p , we depict more realistically the stochastic interactions among species within ecosystems. When we fix mobility and vary the value of p or Rmax, the Monte Carlo simulations show that the spiral waves grow in size, and the system becomes unstable and biodiversity is lost with increasing p or Rmax. These results are similar to recent results of Reichenbach et al. [Nature (London) 448, 1046 (2007)], in which they increase the mobility only without including long-range interactions. We compared extinctions with or without long-range connections and computed spatial correlation functions and correlation length. We conclude that long-range connections could improve the mobility of species, drastically changing their crossover to extinction and making the system more unstable.

Genome editing: the road of CRISPR/Cas9 from bench to clinic.

PubMed

Eid, Ayman; Mahfouz, Magdy M

2016-10-14

Molecular scissors engineered for site-specific modification of the genome hold great promise for effective functional analyses of genes, genomes and epigenomes and could improve our understanding of the molecular underpinnings of disease states and facilitate novel therapeutic applications. Several platforms for molecular scissors that enable targeted genome engineering have been developed, including zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and, most recently, clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR-associated-9 (Cas9). The CRISPR/Cas9 system's simplicity, facile engineering and amenability to multiplexing make it the system of choice for many applications. CRISPR/Cas9 has been used to generate disease models to study genetic diseases. Improvements are urgently needed for various aspects of the CRISPR/Cas9 system, including the system's precision, delivery and control over the outcome of the repair process. Here, we discuss the current status of genome engineering and its implications for the future of biological research and gene therapy.

Vibrational autoionization of state-selective jet-cooled methanethiol (CH 3SH) investigated with infrared + vacuum-ultraviolet photoionization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Min; Shen, Zhitao; Pratt, S. T.

Vibrational autoionization of Rydberg states provides key information about nonadiabatic processes above an ionization threshold. In this work, we employed time-of-flight mass detection of CH 3SH + to record vibrational-state selective photo-ionization efficiency (PIE) spectra of jet-cooled methanethiol (CH 3SH) on exciting CH 3SH to a specific vibrationally excited state with an infrared (IR) laser, followed by excitation with a tunable laser in the vacuum-ultraviolet (VUV) region for ionization. Autoionizing Rydberg states assigned to the ns, np, nd and nf series are identified. When IR light at 2601 (ν 3, SH stretching mode) and 2948 cm -1 (ν 2, CHmore » 3 symmetric stretching mode) was employed, the Rydberg series converged to the respective vibrationally excited (ν 3 and ν 2) states of CH 3SH +. When IR light at 3014 cm -1 (overlapped ν 1/ν 9, CH 3 antisymmetric stretching and CH 2 antisymmetric stretching modes) was employed, Rydberg series converging to two vibrationally excited states (ν 1 and ν 9) of CH 3SH + were observed. When IR light at 2867 cm -1 (2ν 10, overtone of CH 3 deformation mode) and 2892 cm -1 (2ν 4, overtone of CH 2 scissoring mode) was employed, both Δν = -1 and Δν = -2 ionization transitions were observed; there is evidence for direct ionization from the initial state into the CH 3SH + (ν 4 + = 1) continuum. In all observed IR-VUV-PIE spectra, the ns and nd series show intensity greater than the other Rydberg series, which is consistent with the fact that the highest-occupied molecular orbital of CH 3SH is a p-like lone pair orbital on the S atom. Finally, the quantum yields for autoionization of various vibrational excited states are discussed. Values of ν 1 = 3035, ν 2 = 2884, ν 3 = 2514, and ν 9 = 2936 cm -1 for CH 3SH + derived from the converged limits agree satisfactorily with values observed for Ar-tagged CH 3SH + at 3026, 2879, 2502, and 2933 cm -1.« less

Vibrational autoionization of state-selective jet-cooled methanethiol (CH 3SH) investigated with infrared + vacuum-ultraviolet photoionization

DOE PAGES

Xie, Min; Shen, Zhitao; Pratt, S. T.; ...

2017-10-24

Vibrational autoionization of Rydberg states provides key information about nonadiabatic processes above an ionization threshold. In this work, we employed time-of-flight mass detection of CH 3SH + to record vibrational-state selective photo-ionization efficiency (PIE) spectra of jet-cooled methanethiol (CH 3SH) on exciting CH 3SH to a specific vibrationally excited state with an infrared (IR) laser, followed by excitation with a tunable laser in the vacuum-ultraviolet (VUV) region for ionization. Autoionizing Rydberg states assigned to the ns, np, nd and nf series are identified. When IR light at 2601 (ν 3, SH stretching mode) and 2948 cm -1 (ν 2, CHmore » 3 symmetric stretching mode) was employed, the Rydberg series converged to the respective vibrationally excited (ν 3 and ν 2) states of CH 3SH +. When IR light at 3014 cm -1 (overlapped ν 1/ν 9, CH 3 antisymmetric stretching and CH 2 antisymmetric stretching modes) was employed, Rydberg series converging to two vibrationally excited states (ν 1 and ν 9) of CH 3SH + were observed. When IR light at 2867 cm -1 (2ν 10, overtone of CH 3 deformation mode) and 2892 cm -1 (2ν 4, overtone of CH 2 scissoring mode) was employed, both Δν = -1 and Δν = -2 ionization transitions were observed; there is evidence for direct ionization from the initial state into the CH 3SH + (ν 4 + = 1) continuum. In all observed IR-VUV-PIE spectra, the ns and nd series show intensity greater than the other Rydberg series, which is consistent with the fact that the highest-occupied molecular orbital of CH 3SH is a p-like lone pair orbital on the S atom. Finally, the quantum yields for autoionization of various vibrational excited states are discussed. Values of ν 1 = 3035, ν 2 = 2884, ν 3 = 2514, and ν 9 = 2936 cm -1 for CH 3SH + derived from the converged limits agree satisfactorily with values observed for Ar-tagged CH 3SH + at 3026, 2879, 2502, and 2933 cm -1.« less

Pigeons ("Columba Livia") Approach Nash Equilibrium in Experimental Matching Pennies Competitions

ERIC Educational Resources Information Center

Sanabria, Federico; Thrailkill, Eric

2009-01-01

The game of Matching Pennies (MP), a simplified version of the more popular Rock, Papers, Scissors, schematically represents competitions between organisms with incentives to predict each other's behavior. Optimal performance in iterated MP competitions involves the production of random choice patterns and the detection of nonrandomness in the…

NAVS Alternatives Set the Standard for Humane Education.

ERIC Educational Resources Information Center

Petty, Linda

1997-01-01

Describes some alternatives to dissection offered to teachers through the National Anti-Vivisection Society (NAVS) and other sources. These include models, CD-ROMs, and software that enable students to click on scalpels, scissors, and other instruments to cut through videotaped specimens. Also details the Dissection Hotline and the Dissection…

14 CFR 125.207 - Emergency equipment requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Administrator: Contents Quantity Adhesive bandage compressors, 1 in 16 Antiseptic swabs 20 Ammonia inhalants 10 Bandage compressors, 4 in 8 Triangular bandage compressors, 40 in 5 Arm splint, noninflatable 1 Leg splint, noninflatable 1 Roller bandage, 4 in 4 Adhesive tape, 1-in standard roll 2 Bandage scissors 1 Protective latex...

14 CFR 125.207 - Emergency equipment requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Administrator: Contents Quantity Adhesive bandage compressors, 1 in 16 Antiseptic swabs 20 Ammonia inhalants 10 Bandage compressors, 4 in 8 Triangular bandage compressors, 40 in 5 Arm splint, noninflatable 1 Leg splint, noninflatable 1 Roller bandage, 4 in 4 Adhesive tape, 1-in standard roll 2 Bandage scissors 1 Protective latex...

14 CFR 125.207 - Emergency equipment requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Administrator: Contents Quantity Adhesive bandage compressors, 1 in 16 Antiseptic swabs 20 Ammonia inhalants 10 Bandage compressors, 4 in 8 Triangular bandage compressors, 40 in 5 Arm splint, noninflatable 1 Leg splint, noninflatable 1 Roller bandage, 4 in 4 Adhesive tape, 1-in standard roll 2 Bandage scissors 1 Protective latex...

14 CFR 125.207 - Emergency equipment requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Administrator: Contents Quantity Adhesive bandage compressors, 1 in 16 Antiseptic swabs 20 Ammonia inhalants 10 Bandage compressors, 4 in 8 Triangular bandage compressors, 40 in 5 Arm splint, noninflatable 1 Leg splint, noninflatable 1 Roller bandage, 4 in 4 Adhesive tape, 1-in standard roll 2 Bandage scissors 1 Protective latex...

Apparatus for Assisting Childbirth

NASA Technical Reports Server (NTRS)

Smeltzer, Stanley S., III (Inventor); Lawson, Seth W. (Inventor)

1997-01-01

The invention consists of novel, scissors-like forceps in combination with optical monitoring hardware for measuring the extraction forces on a fetal head. The novel features of the forceps together with knowledge of real time forces on the fetal head enable a user to make a much safer delivery for mother and baby.

Science | AAAS

Science.gov Websites

be caused by haywire immune system eating brain connections CRISPR Stopping CRISPR's genome-editing scissors from snipping out of control CRISPR patent hearing produces no clear winner, only 'soft signals ' Did a Swedish researcher eat the first CRISPR meal ever served? Top articles in Careers dollars in a

University of Minnesota Duluth Engineering Design Challenge

DTIC Science & Technology

2015-03-23

on overall weight, size, lifting capacity, and ease of transporting. Many initial designs were considered including fire hose lift bags, hydraulic...Many initial designs were considered including fire hose lift bags, hydraulic lifts, a scissor lift, a spring loaded pawl tri-pod, and a pulley lift...26 Fire Hose

Melvin on FD during Expedition 16/STS-122 Joint Operations

NASA Image and Video Library

2008-02-10

S122-E-007587 (10 Feb. 2008) --- Astronaut Leland Melvin, STS-122 mission specialist, witnesses microgravity in action on the aft flight deck of Space Shuttle Atlantis while docked with the International Space Station. A package of food, scissors and a spoon float freely near Melvin.

Interview: Fenton Johnson.

ERIC Educational Resources Information Center

Creadick, Anna

1995-01-01

Fenton Johnson, an award-winning writer living in San Francisco, reflects on growing up in a large Catholic family in Appalachian Kentucky and the stigma associated with being gay. His latest novel, "Scissors, Papers, Rock," relates the story of a young man leaving the gay urban culture of San Francisco to return to the straight rural…

Rocks, Paper, Scissors: Best Practices in Peer Mentoring

ERIC Educational Resources Information Center

Bowden, Shelly Hudson

2014-01-01

In this article, Shelly Hudson Bowden, a kindergarten teacher for 14 years, offers her observations of peer-to-peer mentoring relationships among her kindergarten students that they formed and maintained. These mentoring relationships supported students' learning as they mentored one another in both "social" and "academic"…

Managing the Student Press: Consider Carefully before You Unsheath the Censor's Scissors.

ERIC Educational Resources Information Center

Sendor, Benjamin

1988-01-01

The United States Supreme Court's decision in "Hazelwood School District v. Kuhlmeier" gives school officials sweeping power over school-sponsored publications and other curricular and extracurricular activities. To avoid charges of squelching student expression, school boards should make sure that policies limit censorship to legitimate…

"Scissors, Paper, Stone": Perceptual Foundations of Noun Classifier Systems.

ERIC Educational Resources Information Center

Erbaugh, Mary S.

While all languages use shape to classify unfamiliar objects, some languages as diverse as Mandarin, Thai, Japanese, Mohawk, and American Sign Language lexicalize these and other types of description as noun classifiers. Classification does not develop from a fixed set of features in the object, but is discourse-sensitive and invoked when it would…

A Second Life for CDs

ERIC Educational Resources Information Center

Snoderly, Kathleen

2011-01-01

Cutting a few CDs apart with scissors, the author found that the process created somewhat brittle shards. As a result, she started to paint a few with acrylic, finding to her amazement that the paint gave the CDs a leathery, more manageable texture. Upon further experimentation, she found that if the CDs are painted somewhat translucently in…

SUBVERISON: Uruguayan Armed Forces Summary of Subversive Movement in Latin America. Part I

DTIC Science & Technology

1977-08-12

nication" ("Problemas y Perspectivas de la Comunicacion de Masas"), Buenos Aires, TROQUEL. 935 ARGENTINA. Leonard C. Lewin, "Undesirable Peace...and the Scissors. The Means of Social Communication in Argentina" ("La Red y La Tijera. Los Medios de Comunicacion Social en la Argentina

Losers in the 'Rock-Paper-Scissors' game: The role of non-hierarchical competition and chaos as biodiversity sustaining agents in aquatic systems

EPA Science Inventory

Processes occurring within small areas (patch-scale) that influence species richness and spatial heterogeneity of larger areas (landscape-scale) have long been an interest of ecologists. This research focused on the role of patch-scale deterministic chaos arising in phytoplankton...

Five Easy Principles to Make Math Moments Count

ERIC Educational Resources Information Center

Cutler, Carrie S.

2011-01-01

Preschool children are learning so many skills--how to cut with scissors, zip zippers, recognize the alphabet and their names, and share toys with others. A strong academic curriculum also requires that children learn more about math (National Council of Teachers of Mathematics [NCTM], 2000). By following the five easy principles outlined here,…

Volunteering leads to rock-paper-scissors dynamics in a public goods game

NASA Astrophysics Data System (ADS)

Semmann, Dirk; Krambeck, Hans-Jürgen; Milinski, Manfred

2003-09-01

Collective efforts are a trademark of both insect and human societies. They are achieved through relatedness in the former and unknown mechanisms in the latter. The problem of achieving cooperation among non-kin has been described as the `tragedy of the commons', prophesying the inescapable collapse of many human enterprises. In public goods experiments, initial cooperation usually drops quickly to almost zero. It can be maintained by the opportunity to punish defectors or the need to maintain good reputation. Both schemes require that defectors are identified. Theorists propose that a simple but effective mechanism operates under full anonymity. With optional participation in the public goods game, `loners' (players who do not join the group), defectors and cooperators will coexist through rock-paper-scissors dynamics. Here we show experimentally that volunteering generates these dynamics in public goods games and that manipulating initial conditions can produce each predicted direction. If, by manipulating displayed decisions, it is pretended that defectors have the highest frequency, loners soon become most frequent, as do cooperators after loners and defectors after cooperators. On average, cooperation is perpetuated at a substantial level.

Concurrent performance in a three-alternative choice situation: response allocation in a Rock/Paper/Scissors game.

PubMed

Kangas, Brian D; Berry, Meredith S; Cassidy, Rachel N; Dallery, Jesse; Vaidya, Manish; Hackenberg, Timothy D

2009-10-01

Adult human subjects engaged in a simulated Rock/Paper/Scissors game against a computer opponent. The computer opponent's responses were determined by programmed probabilities that differed across 10 blocks of 100 trials each. Response allocation in Experiment 1 was well described by a modified version of the generalized matching equation, with undermatching observed in all subjects. To assess the effects of instructions on response allocation, accurate probability-related information on how the computer was programmed to respond was provided to subjects in Experiment 2. Five of 6 subjects played the counter response of the computer's dominant programmed response near-exclusively (e.g., subjects played paper almost exclusively if the probability of rock was high), resulting in minor overmatching, and higher reinforcement rates relative to Experiment 1. On the whole, the study shows that the generalized matching law provides a good description of complex human choice in a gaming context, and illustrates a promising set of laboratory methods and analytic techniques that capture important features of human choice outside the laboratory.

Stump closure of a thick pancreas using stapler closure increases pancreatic fistula after distal pancreatectomy.

PubMed

Kawai, Manabu; Tani, Masaji; Okada, Ken-ichi; Hirono, Seiko; Miyazawa, Motoki; Shimizu, Astusi; Kitahata, Yuji; Yamaue, Hiroki

2013-09-01

The appropriate surgical stump closure after distal pancreatectomy (DP) is still controversial. This study investigated the benefits and risks of stapler closure during DP. The risk factors of pancreatic fistulas were investigated in 122 DPs among 3 types of stump closure: hand-sewn suture (n = 32), bipolar scissors (n = 45), and stapler closure (n = 45). There was no significant difference in the incidence of pancreatic fistula between the 3 types of stump closure (hand-sewn suture [44%] vs bipolar scissors [37.7%] vs stapler closure [35.5%]). By using receiver operating characteristics curves, 12 mm was the best cutoff value of the thickness of the pancreas for pancreatic fistulas after DP using stapler closure. Three factors (ie, male sex, body mass index >25 kg/m(2), and stapler closure) were independent risk factors of pancreatic fistulas after DP with a pancreas thicker than 12 mm. A pancreas thicker than 12 mm significantly increased the incidence of pancreatic fistulas after DP using stapler closure. Copyright © 2013 Elsevier Inc. All rights reserved.

Oscillatory dynamics in rock-paper-scissors games with mutations.

PubMed

Mobilia, Mauro

2010-05-07

We study the oscillatory dynamics in the generic three-species rock-paper-scissors games with mutations. In the mean-field limit, different behaviors are found: (a) for high mutation rate, there is a stable interior fixed point with coexistence of all species; (b) for low mutation rates, there is a region of the parameter space characterized by a limit cycle resulting from a Hopf bifurcation; (c) in the absence of mutations, there is a region where heteroclinic cycles yield oscillations of large amplitude (not robust against noise). After a discussion on the main properties of the mean-field dynamics, we investigate the stochastic version of the model within an individual-based formulation. Demographic fluctuations are therefore naturally accounted and their effects are studied using a diffusion theory complemented by numerical simulations. It is thus shown that persistent erratic oscillations (quasi-cycles) of large amplitude emerge from a noise-induced resonance phenomenon. We also analytically and numerically compute the average escape time necessary to reach a (quasi-)cycle on which the system oscillates at a given amplitude. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Teaching three-dimensional surgical concepts of inguinal hernia in a time-effective manner using a two-dimensional paper-cut.

PubMed

Mann, B D; Seidman, A; Haley, T; Sachdeva, A K

1997-06-01

Because inguinal hernia repair is difficult for third-year students to comprehend, a 2-dimensional paper-cut was developed to teach the concepts of inguinal hernia in a time-effective manner before students' observation of herniorrhaphy in the operating room. Using Adobe Illustrator 5.5 for MacIntosh, a 2-dimensional inexpensively printed paper-cut was created to allow students to perform their own simulated hernia repair before observing surgery. The exercise was performed using a no.15 scalpel or an iris scissors and was evaluated by comparing 10-question pre-tests and post-tests. Seventy-five students performed the exercise, most completing it within 15 minutes. The mean pre-test score was 7.4/10 and the mean post-test score was 9.1/10. Students performing the paper-cut reported better understanding when observing actual herniorrhaphy. A 2-dimensional paper-cut ("surgical origami") may be a time-effective method to prepare students for the observation of hernia repair.

Molecular imprinting of caffeine on cellulose/silica composite and its characterization

NASA Astrophysics Data System (ADS)

Gill, Rajinder Singh

This dissertation presents a study to prepare molecularly imprinted inorganic/organic hybrid composite which not only confirm the higher binding capabilities for the target molecule (template) but also discriminate its structural analogs. Molecularly imprinted Cellulose/Silica composite (MIP) was prepared by using caffeine as the template. Silica derived from TEOS by using sol-gel techniques was deposited on cheap, abundant organic matrix such as cellulose, which can provide a filtering medium while coffee brewing. Removal of the template from the precursor was verified by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). Remarkably reduced intensity of -NH2 scissor like mode of caffeine and the presence of traces of "N" by elemental analysis, confirmed the complete removal of caffeine on washing with ethanol. Cellulose to TEOS mass ratio of 2:1 was found to be close to optimal during our analysis. Energy dispersive spectroscopy results leads to an important fact that the deposition of silica was stable even at 373 K. Focus was on the adsorption affinities of caffeine by MIP and was tested by performing relative adsorption of caffeine by MIP and blank (standard) using demountable path length cell in IR. It was observed that MIP showed almost 3-folds higher adsorption capabilities as compared to blank. The initial rate of adsorption of caffeine by MIP is much higher than blank which is one of the desirable feature according the its intended use. The higher adsorption of caffeine by MIP not only depends on the amount of silica deposited but also the available binding sites present on its surface. Selectivity of MIP was also verified by the competitive adsorption of caffeine and its structure analogs such as theophylline. Clearly, MIP showed greater and more rapid binding capabilities for caffeine than theophylline. At short contact times, the binding capability for caffeine is almost 1.8 times greater than the binding capabilities for theophylline.

No Scissors Allowed

ERIC Educational Resources Information Center

Bates, Janet

2012-01-01

Once, in the author's continual quest for unique and varied art projects, she was inspired by a colorful Kleenex[R] box which was covered with faces in a variety of sizes, ages, shapes and colors. What a fun idea to have her class create their own portraits using only construction paper, glue and one's fingers. As she shared an examplar rip-art…

Paper, Scissors, Rock: Aspects of the Intertwined Histories of Pedagogy and Model-Making

ERIC Educational Resources Information Center

Insley, Jane

2017-01-01

Investigating the stories behind the makers of 3D models of crystals has proved unexpectedly unstraightforward. Drawing on actor-network theory (ANT), this article investigates the references behind a set of models of mineralogical crystals made of pasteboard held by National Museums Scotland (NMS), to uncover the history and tradition of such…

Compact, Low-Power, and High-Speed Graphene-Based Integrated Photonic Modulator Technology

DTIC Science & Technology

2017-11-02

which we want to transfer graphene, we cut the graphene-on- Copper foil into appropriate pieces using sharp razor blades or scissors. We then follow a...rinsed under running DI water for 5 minutes. Patterns on HSQ are then transferred to alumina in a Plasma-Therm ICP system using the recipe which was

The Use of Tools by Children with Hemophilia.

ERIC Educational Resources Information Center

Markova, I.; And Others

1984-01-01

Eight mothers with their 3.1- to 5.7-year-old hemophiliac children and eight control mothers with their nonhemophiliac children were videotaped while playing two games without tools and three additional games involving use of a knife, a pair of scissors, and a wooden hammer. Mothers of hemophiliac children did not correct their children when they…

Demonstration of the Principles of Restriction Endonuclease Cleavage Reactions Using Thermostable Bfl I from "Anoxybacillus Flavithermus"

ERIC Educational Resources Information Center

Sharma, Prince; D'Souza, David R.; Bhandari, Deepali; Parashar, Vijay; Capalash, Neena

2003-01-01

Restriction enzymes are basic tools in recombinant DNA technology. To shape the molecular biology experiments, the students must know how to work with these molecular scissors. Here, we describe an integrated set of experiments, introduced in the "Advances in Molecular Biology and Biotechnology" postgraduate course, which covers the important…

Rockin' around the Rock Cycle

ERIC Educational Resources Information Center

Frack, Susan; Blanchard, Scott Alan

2005-01-01

In this activity students will simulate how sedimentary rocks can be changed into metamorphic rocks by intense pressure. The materials needed are two small pieces of white bread, one piece of wheat bread, and one piece of a dark bread (such as pumpernickel or dark rye) per student, two pieces of waxed paper, scissors, a ruler, and heavy books.…

Robotic Cholecystectomy Using the Newly Developed Korean Robotic Surgical System, Revo-i: A Preclinical Experiment in a Porcine Model.

PubMed

Kang, Chang Moo; Chong, Jae Uk; Lim, Jin Hong; Park, Dong Won; Park, Sung Jun; Gim, Suhyeon; Ye, Hye Jin; Kim, Se Hoon; Lee, Woo Jung

2017-09-01

One Korean company recently successfully produced a robotic surgical system prototype called Revo-i (MSR-5000). We, therefore, conducted a preclinical study for robotic cholecystectomy using Revo-i, and this is a report of the first case of robotic cholecystectomy performed using the Revo-i system in a preclinical porcine model. Revo-i consists of a surgeon console (MSRC-5000), operation cart (MSRO-5000) and vision cart (MSRV-5000), and a 40 kg-healthy female porcine was prepared for robotic cholecystectomy with general anesthesia. The primary end point was the safe completion of these procedures using Revo-i: The total operation time was 88 minutes. The dissection time was defined as the time from the initial dissection of the Calot area to the time to complete gallbladder detachment from the liver bed: The dissection time required 14 minutes. The surgical console time was 45 minutes. There was no gallbladder perforation or significant bleeding noted during the procedure. The porcine survived for two weeks postoperatively without any complications. Like the da Vinci surgical system, the Revo-i provides a three-dimensional operative view and allows for angulated instrument motion (forceps, needle-holders, clip-appliers, scissors, bipolar energy, and hook monopolar energy), facilitating an effective laparoscopic procedure. Our experience suggests that robotic cholecystectomy can be safely completed in a porcine model using Revo-i. © Copyright: Yonsei University College of Medicine 2017.

46 CFR 160.041-4 - Contents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... package No. of packages Bandage compress—4″ 1 Single 5 Bandage compress—2″ 4 do 2 Waterproof adhesive..., forceps, scissors, 12 safety pins 1, 1, 1, and 12, respectively Double 1 Wire splint 1 Single 1 Ammonia..., 61/2 gr tablets, vials of 20 5 Double 1 Sterile petrolatum gauze, 3″×18″ 4 Single 3 (c) Instructions...

Occurrence of Children's Echoic Responses According to Interlocutory Question Types.

ERIC Educational Resources Information Center

Fay, Warren H.

Dialogues with 22 echoic 3-year-old children were analyzed according to question type to determine whether some questions are more likely than others to trigger echoic responses. The children were asked to identify and manipulate toy objects such as a car, to identify a group of familiar objects such as a key or scissors, and to respond to…

A SHORT HISTORY CSISRS - AT THE CUTTING EDGE OF NUCLEAR DATA INFORMATION STORAGE AND RETRIEVAL SYSTEMS AND ITS RELATIONSHIP TO CINDA, EXFOR AND ENDF.

DOE Office of Scientific and Technical Information (OSTI.GOV)

HOLDEN, N.E.

A short history of CSISRS, pronounced ''scissors'' and standing for the Cross Section Information Storage and Retrieval System, is given. The relationship of CSISRS to CINDA, to the neutron nuclear data four-centers, to EXFOR and to ENDF, the evaluated neutron nuclear data file, is briefly explained.

Mesoscopic interactions and species coexistence in evolutionary game dynamics of cyclic competitions.

PubMed

Cheng, Hongyan; Yao, Nan; Huang, Zi-Gang; Park, Junpyo; Do, Younghae; Lai, Ying-Cheng

2014-12-15

Evolutionary dynamical models for cyclic competitions of three species (e.g., rock, paper, and scissors, or RPS) provide a paradigm, at the microscopic level of individual interactions, to address many issues in coexistence and biodiversity. Real ecosystems often involve competitions among more than three species. By extending the RPS game model to five (rock-paper-scissors-lizard-Spock, or RPSLS) mobile species, we uncover a fundamental type of mesoscopic interactions among subgroups of species. In particular, competitions at the microscopic level lead to the emergence of various local groups in different regions of the space, each involving three species. It is the interactions among the groups that fundamentally determine how many species can coexist. In fact, as the mobility is increased from zero, two transitions can occur: one from a five- to a three-species coexistence state and another from the latter to a uniform, single-species state. We develop a mean-field theory to show that, in order to understand the first transition, group interactions at the mesoscopic scale must be taken into account. Our findings suggest, more broadly, the importance of mesoscopic interactions in coexistence of great many species.

Stochastic Evolution Dynamic of the Rock-Scissors-Paper Game Based on a Quasi Birth and Death Process

NASA Astrophysics Data System (ADS)

Yu, Qian; Fang, Debin; Zhang, Xiaoling; Jin, Chen; Ren, Qiyu

2016-06-01

Stochasticity plays an important role in the evolutionary dynamic of cyclic dominance within a finite population. To investigate the stochastic evolution process of the behaviour of bounded rational individuals, we model the Rock-Scissors-Paper (RSP) game as a finite, state dependent Quasi Birth and Death (QBD) process. We assume that bounded rational players can adjust their strategies by imitating the successful strategy according to the payoffs of the last round of the game, and then analyse the limiting distribution of the QBD process for the game stochastic evolutionary dynamic. The numerical experiments results are exhibited as pseudo colour ternary heat maps. Comparisons of these diagrams shows that the convergence property of long run equilibrium of the RSP game in populations depends on population size and the parameter of the payoff matrix and noise factor. The long run equilibrium is asymptotically stable, neutrally stable and unstable respectively according to the normalised parameters in the payoff matrix. Moreover, the results show that the distribution probability becomes more concentrated with a larger population size. This indicates that increasing the population size also increases the convergence speed of the stochastic evolution process while simultaneously reducing the influence of the noise factor.

Teaching: the Wave Mechanics of McLeods' Stringy Electron, Explicit Nucleons, and Through-the-Earth Projections of Constellations' Stick Figures

NASA Astrophysics Data System (ADS)

McLeod, Roger David; McLeod, David Matthew

2012-02-01

This shows how Hooke's law, for electron, proton and neutron, 2D and 3D, strings, builds electromagnetic string-waves, extending, and pleasing, Schr"odinger. These are composed of spirally linked, parallel, north-pole oriented, neutrino and antineutrino strings, stable by magnetic repulsions. Their Dumbo Proton is antineutrino-scissor cut, and compressed in the vicinity of a neutron star, where electrostatic marriage occurs with a neutrino-scissor cut, and compressed, electron, so a Mickey Neutron emerges. Strings predict: electron charge is - 1/3 e, Dumbo P is 25 % longer than Mickey N, and Hooke says relaxing springs fuel three, separate, non-eternal, inflations, after Big Bangs. Gravity is strings, longitudinally linked. Einstein says Herman Grid's black diagonals prove human vision reads its information from algebraically-signed electromagnetic field distributions, (diffraction) patterns, easily known by ray-tracing, not requiring difficult Spatial Fourier Transformation. High-schoolers understand its application to Wave Mechanics, agreeing that positive-numbered probabilities do not enter, to possibly displease God. Detected stick-figure forms of constellations: like Phoenix, Leo, Canis Major, and especially Orion, fool some observers into false beliefs in things like UFHumanoids, or Kokopelli, Pele and Pamola!

Six years follow-up of a penis replantation in a child.

PubMed

de Lagausie, Pascal; Jehanno, Pascal

2008-03-01

Total amputation of the penis is very rare in a child. This article presents a case of a traumatic penile amputation at the base of the perineum, with scissors, in a 4-year-old child. Six hours after the aggression, the penis was replanted. Three weeks after the intervention, except for skin necrosis, the results were excellent. Six years afterward, this child has done very well from pediatric, psychological, urological, and plastic surgery points of view. Sensibility and erections are present and normal. Longer follow-ups particularly during puberty are necessary. Total amputation of the penis is a very rare accident in a child. Partial lesions are more common, particularly during circumcision. As in adult cases, replantation of the penis in a child needs a clean section by scissors or a knife, a correct conservation of the penis (in ice but without direct contact), and a short period between the lesion and the surgical procedure. All these conditions explain that very few cases are reported in the literature. We present a case of amputation of the penis in a 4-year-old child, with good results 6 years afterward.

Traffic jams induce dynamical phase transition in spatial rock-paper-scissors game

NASA Astrophysics Data System (ADS)

Nagatani, Takashi; Ichinose, Genki; Tainaka, Kei-ichi

2018-02-01

Spatial and temporal behaviors of the rock-paper-scissors (RPS) game is key to understanding not only biodiversity but also a variety of cyclic systems. It has been demonstrated that, in the stochastic cellular automaton of RPS game, three species cannot survive on one-dimensional (1-d) lattice; only a single species survives. Previous studies have shown that three species are able to coexist if the migration of species is considered. However, their definitions of migration are the swapping of two species or the random walk of species, which rarely occurs in nature. Here, we investigate the effect of migration by using the 1-d lattice traffic model in which species can move rightward if the site ahead is empty. Computer simulations reveal that three species can survive at the same time within the wide range of parameter values. At low densities, all species can coexist. In contrast, the extinction of two species occurs if the density exceeds the critical limit of the jamming transition. This dynamical phase transition between the coexistence and single (non-coexistence) phase clearly separates due to the self-organized pattern: condensation and rarefaction in the stripe-pattern of three species.

Scalable, MEMS-enabled, vibrational tactile actuators for high resolution tactile displays

NASA Astrophysics Data System (ADS)

Xie, Xin; Zaitsev, Yuri; Velásquez-García, Luis Fernando; Teller, Seth J.; Livermore, Carol

2014-12-01

The design, fabrication, and characterization of a new type of tactile display for people with blindness or low vision is reported. Each tactile element comprises a piezoelectric extensional actuator that vibrates in plane, with a microfabricated scissor mechanism to convert the in-plane actuations into robust, higher-amplitude, out-of-plane (vertical) vibrations that are sensed with the finger pads. When the tactile elements are formed into a 2D array, information can be conveyed to the user by varying the pattern of vibrations in space and time. Analytical models and finite element analysis were used to design individual tactile elements, which were implemented with PZT actuators and both SU-8 and 3D-printed scissor amplifiers. The measured displacements of these 3 mm × 10 mm, MEMS-enabled tactile elements exceed 10 µm, in agreement with models, with measured forces exceeding 45 mN. The performance of the MEMS-enabled tactile elements is compared with the performance of larger, fully-macroscale tactile elements to demonstrate the scale dependence of the devices. The creation of a 28-element prototype is also reported, and the qualitative user experience with the individual tactile elements and displays is described.

Old scissors to industrial automation: the impact of technologic evolution on worker's health.

PubMed

Teodoroski, Rita de Cassia Clark; Koppe, Vanessa Mazzocchi; Merino, Eugênio Andrés Díaz

2012-01-01

To cut a fabric, the professional performs different jobs and among them stands out the cut. The scissors has been the instrument most used for this activity. Over the years, technology has been conquering its space in the textile industry. However, despite the industrial automation able to offer subsidies to answer employment market demands, without appropriate orientation, the worker is exposed to the risks inherent at the job. Ergonomics is a science that search to promote the comfort and well being in consonance with efficacy. Its goals are properly well defined and clearly guide the actions aimed at transforming the working conditions. This study aimed to analyze the activity of cut tissues with a machine by a seamstress and the implications on their body posture. The methodology used was the observation technique and application of the Protocol RULA, where the result obtained was the level 3 and score 5, confirming that "investigations and changes are required soon". Conclude that using the machine to tissue cut should be encouraged, but in conjunction with orientations for improving posture while handling it. It seeks to prevent dysfunction of the musculoskeletal system that prevents employees from performing their work tasks efficiently and productively.

Serial Casting as an Adjunct to Botulinum Toxin Type A Treatment in Children With Cerebral Palsy and Spastic Paraparesis With Scissoring of the Lower Extremities.

PubMed

Dai, Alper I; Demiryürek, Abdullah T

2017-06-01

The purpose of this study was to examine whether combination therapy of serial casting and botulinum toxin type A injection can further enhance the effects of botulinum toxin type A in children with cerebral palsy with scissoring of both legs. This study was a prospective and randomized trial. The children were divided into 2 groups, one of which received serial casting after botulinum toxin type A (n = 40), and the other which only received botulinum toxin type A (n = 40). Serial casting started 3 weeks after the botulinum toxin type A. Both groups received physiotherapy. Groups were assessed at baseline then compared at 6 and 12 weeks following the intervention. Significant improvements in Gross Motor Function Measure-66 and Caregiver Health Questionnaire were recorded in both groups ( P < .001). The modified Ashworth scale improved significantly following botulinum toxin type A in the serial casting group ( P < .05), but not in botulinum toxin type A only group. These results suggest that serial casting after botulinum toxin type A can enhance the benefits of botulinum toxin type A in children with cerebral palsy.

An experimental investigation of evolutionary dynamics in the Rock-Paper-Scissors game.

PubMed

Hoffman, Moshe; Suetens, Sigrid; Gneezy, Uri; Nowak, Martin A

2015-03-06

Game theory describes social behaviors in humans and other biological organisms. By far, the most powerful tool available to game theorists is the concept of a Nash Equilibrium (NE), which is motivated by perfect rationality. NE specifies a strategy for everyone, such that no one would benefit by deviating unilaterally from his/her strategy. Another powerful tool available to game theorists are evolutionary dynamics (ED). Motivated by evolutionary and learning processes, ED specify changes in strategies over time in a population, such that more successful strategies typically become more frequent. A simple game that illustrates interesting ED is the generalized Rock-Paper-Scissors (RPS) game. The RPS game extends the children's game to situations where winning or losing can matter more or less relative to tying. Here we investigate experimentally three RPS games, where the NE is always to randomize with equal probability, but the evolutionary stability of this strategy changes. Consistent with the prediction of ED we find that aggregate behavior is far away from NE when it is evolutionarily unstable. Our findings add to the growing literature that demonstrates the predictive validity of ED in large-scale incentivized laboratory experiments with human subjects.

Stochastic Evolution Dynamic of the Rock-Scissors-Paper Game Based on a Quasi Birth and Death Process.

PubMed

Yu, Qian; Fang, Debin; Zhang, Xiaoling; Jin, Chen; Ren, Qiyu

2016-06-27

Stochasticity plays an important role in the evolutionary dynamic of cyclic dominance within a finite population. To investigate the stochastic evolution process of the behaviour of bounded rational individuals, we model the Rock-Scissors-Paper (RSP) game as a finite, state dependent Quasi Birth and Death (QBD) process. We assume that bounded rational players can adjust their strategies by imitating the successful strategy according to the payoffs of the last round of the game, and then analyse the limiting distribution of the QBD process for the game stochastic evolutionary dynamic. The numerical experiments results are exhibited as pseudo colour ternary heat maps. Comparisons of these diagrams shows that the convergence property of long run equilibrium of the RSP game in populations depends on population size and the parameter of the payoff matrix and noise factor. The long run equilibrium is asymptotically stable, neutrally stable and unstable respectively according to the normalised parameters in the payoff matrix. Moreover, the results show that the distribution probability becomes more concentrated with a larger population size. This indicates that increasing the population size also increases the convergence speed of the stochastic evolution process while simultaneously reducing the influence of the noise factor.

(CaO)nIrO2 (n = 1, 2, 4) family: Chemical scissors effects of CaO on structural characteristics correlated to physical properties. Ab initio study

NASA Astrophysics Data System (ADS)

Matar, Samir F.; Etourneau, Jean

2017-11-01

Based on crystal chemistry analysis within Ca-Ir-O ternary, the generic (CaO)nIrO2 formula leading to CaIrO3 for n = 1, Ca2IrO4 for n = 2 and Ca4IrO6 for n = 4 actual chemical compounds show significant structural changes regarding the spatial arrangement of IrO6 octahedra whereby increasing amounts of CaO act as 'chemical scissor' decreasing the dimensionality of stacking octahedra from 3D (IrO2) to 0D (Ca4IrO6). This is accompanied by changes in the electronic structure investigated within density functional theory. Such changes are particularly exhibited by linear increase of Ir density of states at the Fermi level revealing increasing localization of d states with crystal field effects. Eventually only for Ca4IrO6 a magnetic instability occurs in non magnetic configuration. Spin polarized calculations lead to development of small magnitude but finite magnetization on Ir with M 0.50 μB totally polarized along minority spin channel ↓.

Corrosion protection of reusable surgical instruments.

PubMed

Shah, Sadiq; Bernardo, Mildred

2002-01-01

To understand the corrosion properties of surgical scissors, 416 stainless steel disks and custom electrodes were used as simulated surfaces under various conditions. These simulated surfaces were exposed to tap water and 400-ppm synthetic hard water as Ca2CO3 under different conditions. The samples were evaluated by various techniques for corrosion potential and the impact of environmental conditions on the integrity of the passive film. The electrodes were used to monitor the corrosion behavior by potentiodynamic polarization technique in water both in the presence and absence of a cleaning product. The surface topography of the 416 stainless steel disks was characterized by visual observations and scanning electron microscopy (SEM), and the surface chemistry of the passive film on the surface of the scissors was characterized by x-ray photoelectron spectroscopy (XPS). The results suggest that surgical instruments made from 416 stainless steel are not susceptible to uniform corrosion; however, they do undergo localized corrosion. The use of suitable cleaning products can offer protection against localized corrosion during the cleaning step. More importantly, the use of potentiodynamic polarization techniques allowed for a quick and convenient approach to evaluate the corrosion properties of surgical instruments under a variety of simulated-use environmental conditions.

Kinematics of Faulting and Structural Evolution of Neogene Supra-detachment Basins on the Menderes Metamorphic Core Complex, Western Anatolia

NASA Astrophysics Data System (ADS)

Dilek, Y.; Oner, Z.; Davis, E. A.

2007-12-01

The Menderes metamorphic massif (MM) in western Anatolia is a classic core complex with exhumed high-grade crustal rocks intruded by granodioritic plutons and overlain by syn-extensional sedimentary rocks. Timing and the mechanism(s) of the initial exhumation of the MM are controversial, and different hypotheses exist in the literature. Major structural grabens (i.e. Alasehir, Buyuk Menderes) within the MM that are bounded by high-angle and seismically active faults are late-stage brittle structures, which characterize the block-faulting phase in the extensional history of the core complex and are filled with Quaternary sediments. On the southern shoulder of the Alasehir graben high-grade metamorphic rocks of the MM are overlain by the Miocene and younger sedimentary rocks above a N-dipping detachment surface. The nearly 100-m-thick cataclastic shear zone beneath this surface contain S-C fabrics, microfaults, Riedel shears, mica-fish structures and shear bands, all consistently indicating top-to-the North shearing. Granodioritic plutons crosscutting the MM and the detachment surface are exposed within this cataclastic zone, displaying extensional ductile and brittle structures. The oldest sedimentary rocks onlapping the cataclastic shear zone of the MM here are the Middle Miocene lacustrine shale and limestone units, unconformably overlain by the Upper Miocene fluvial and alluvial fan deposits. Extensive development of these alluvial fan deposits by the Late Miocene indicates the onset of range-front faulting in the MM by this time, causing a surge of coarse clastic deposition along the northern edge of the core complex. The continued exhumation and uplift of the MM provided the necessary relief and detrital material for the Plio-Pleistocene fluvial systems in the Alasehir supradetachment basin (ASDB). A combination of rotational normal faulting and scissor faulting in the extending ASDB affected the depositional patterns and drainage systems, and produced local unconformities within the basinal stratigraphy. High-angle, oblique-slip scissor faults crosscutting the MM rocks, the detachment surface and the basinal strata offset them for more than few 100 meters and the fault blocks locally show different structural architecture and metamorphic grades, suggesting differential uplift along these scissor faults. This fault kinematics and the distribution of range-parallel and range-perpendicular faults strongly controlled the shape and depth of the accommodation space within the ASDB. At a more regional scale scissor faulting across the MM seems to have controlled the foci of Plio-Pleistocene point-source volcanism in the Aegean extensional province (e.g. Kula area). There are no major interruptions in the syn-extensional depositional history of the ASDB, ruling out the pulsed-extension models suggesting a period of contractional deformation in the late Cenozoic evolution of the MM. The onset of exhumation and extensional tectonics in the MM and western Anatolia was a result of thermal weakening of the orogenic crust, following a widespread episode of post-collisional magmatism in the broader Aegean region during the Eocene through Miocene.

Energy harvesting from controlled buckling of piezoelectric beams

NASA Astrophysics Data System (ADS)

Ansari, M. H.; Karami, M. Amin

2015-11-01

A piezoelectric vibration energy harvester is presented that can generate electricity from the weight of passing cars or crowds. The energy harvester consists of a piezoelectric beam, which buckles when the device is stepped on. The energy harvester can have a horizontal or vertical configuration. In the vertical (direct) configuration, the piezoelectric beam is vertical and directly sustains the weight of the vehicles or people. In the horizontal (indirect) configuration, the vertical weight is transferred to a horizontal axial force through a scissor-like mechanism. Buckling of the beam results in significant stresses and, thus, large power production. However, if the beam’s buckling is not controlled, the beam will fracture. To prevent this, the axial deformation is constrained to limit the deformations of the beam. In this paper, the energy harvester is analytically modeled. The considered piezoelectric beam is a general non-uniform beam. The natural frequencies, mode shapes, and the critical buckling force corresponding to each mode shape are calculated. The electro-mechanical coupling and the geometric nonlinearities are included in the model. The design criteria for the device are discussed. It is demonstrated that a device, realized with commonly used piezoelectric patches, can generate tens of milliwatts of power from passing car traffic. The proposed device could also be implemented in the sidewalks or integrated in shoe soles for energy generation. One of the key features of the device is its frequency up-conversion characteristics. The piezoelectric beam undergoes free vibrations each time the weight is applied to or removed from the energy harvester. The frequency of the free vibrations is orders of magnitude larger than the frequency of the load. The device is, thus, both efficient and insensitive to the frequency of the force excitations.

The Detection of 6.9 μm Emission Features in the Infrared Spectra of IRAS 04296+3429, IRAS 05341+0852, and IRAS 22272+5435: Evidence for the Presence of Hn-PAHs in Post-AGB Stars

NASA Astrophysics Data System (ADS)

Materese, Christopher K.; Bregman, Jesse D.; Sandford, Scott A.

2017-12-01

Polycyclic aromatic hydrocarbons (PAHs) are generally believed to be ubiquitous in space and responsible for numerous telltale interstellar infrared emission bands. In Sandford et al., we suggested that PAHs with excess hydrogenation at their periphery ({{{H}}}{{n}}-PAHs) may be an important subclass of these molecules in some astrophysical environments. These molecules are candidates to explain objects with anomalously large 3.4 μm features, which are presumed to be associated with the aliphatic C-H stretching vibrations of the excess hydrogen. In that work, we suggest that for Hn-PAHs to be a viable candidate as the source for this 3.4 μm feature, we must also expect to observe methylene scissoring modes at 6.9 μm. In this work, we continue to develop the {{{H}}}{{n}} - {PAH} hypothesis with a focus on the 6.9 μm feature. We also present some new observations of three post-asymptotic giant branch (post-AGB) objects with abnormally large 3.4 μm features, IRAS 04296+3429, IRAS 05341+0852, and IRAS 22272+5435, in addition to one post-AGB object with normal PAH emissions, IRAS 20000+3239. These observations were made using the FORCAST instrument in grism mode on the Stratospheric Observatory for Infrared Astronomy aircraft and demonstrate the presence of a 6.9 μm feature for the three objects with abnormally large 3.4 μm features and no detectable 6.9 μm feature for the normal PAH emitter. These results are consistent with the hypothesis that Hn-PAHs are a possible source of these infrared emission bands.

Study of the Photon Strength Functions for Gadolinium Isotopes with the DANCE Array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dashdorj, D.; Mitchell, G. E.; Baramsai, B.

2009-03-10

The gadolinium isotopes are interesting for reactor applications as well as for medicine and astrophysics. The gadolinium isotopes have some of the largest neutron capture cross sections. As a consequence they are used in the control rod in reactor fuel assembly. From the basic science point of view, there are seven stable isotopes of gadolinium with varying degrees of deformation. Therefore they provide a good testing ground for the study of deformation dependent structure such as the scissors mode. Decay gamma rays following neutron capture on Gd isotopes are detected by the DANCE array, which is located at flight pathmore » 14 at the Lujan Neutron Scattering Center at Los Alamos National Laboratory. The high segmentation and close packing of the detector array enable gamma-ray multiplicity measurements. The calorimetric properties of the DANCE array coupled with the neutron time-of-flight technique enables one to gate on a specific resonance of a specific isotope in the time-of-flight spectrum and obtain the summed energy spectrum for that isotope. The singles gamma-ray spectrum for each multiplicity can be separated by their DANCE cluster multiplicity. Various photon strength function models are used for comparison with experimentally measured DANCE data and provide insight for understanding the statistical decay properties of deformed nuclei.« less

Reexamining the role of the (n ,γ f ) process in the low-energy fission of 235U and 239Pu

NASA Astrophysics Data System (ADS)

Lynn, J. E.; Talou, P.; Bouland, O.

2018-06-01

The (n ,γ f ) process is reviewed in light of modern nuclear reaction calculations in both slow and fast neutron-induced fission reactions on 235U and 239Pu. Observed fluctuations of the average prompt fission neutron multiplicity and average total γ -ray energy below 100-eV incident neutron energy are interpreted in this framework. The surprisingly large contribution of the M 1 transitions to the prefission γ -ray spectrum of 239Pu is explained by the dominant fission probabilities of 0+ and 2+ transition states, which can only be accessed from compound nucleus states formed by the interaction of s -wave neutrons with the target nucleus in its ground state, and decaying through M 1 transitions. The impact of an additional low-lying M 1 scissors mode in the photon strength function is analyzed. We review experimental evidence for fission fragment mass and kinetic-energy fluctuations in the resonance region and their importance in the interpretation of experimental data on prompt neutron data in this region. Finally, calculations are extended to the fast energy range where (n ,γ f ) corrections can account for up to 3% of the total fission cross section and about 20% of the capture cross section.

Space Food Package - Gemini-Titan (GT)-4 Flight - MSC

NASA Image and Video Library

1965-05-01

Food packages of beef and gravy fully reconstituted and ready to eat. An astronaut would squeeze food through opening at right side of package. Water gun is used to reconstitute dehydrated food. Scissors are used to open packages. This is the type of space food which will be used on the Gemini-Titan 4 spaceflight. MSC, Houston, TX *S65-24895 thru S65-24899

Air Saturation Dive 4 - 8 February 1980, CEDD Test Number 1-80.

DTIC Science & Technology

1980-09-01

heart rate. Blood pressure measurements will be recorded. A finger-prick blood sample will be required from each subject for microhematocrit...manoeuvres on command from the surface. Termination Criteria. With the exception of the finger-prick blood sample for microhematocrit determination, all...each experimental period. 3. Scissors, alligator clips - 4 clips/subject. 4. Metric steel tape measure. 5. Impedance cardiography connecting cables - I

Treatment of Neuropathic Pain after SCI with a Catalytic Oxidoreductant

DTIC Science & Technology

2015-10-01

opening the scissor. The thoracic aorta was visualized and a small aneurysm clip was placed on the aorta at the level of T8 to induce ischemic injury...into aorta via left ventricle and a small cut was made on right atrium. The vasculature was 6 | P a g e     briefly rinsed with 60 mL saline by

Hair cuttime on ISS

NASA Image and Video Library

2015-03-22

Caption: ISS043E044174 (03/22/2015) --- Its haircut time onboard the International Space Station as Expedition 43 Commander and NASA astronaut Terry Virts handles the scissors while ESA (European Space Agency) astronaut Samantha Cristoforetti holds the vacuum to immediately pull the fine hair strands into the safe container so they don't float away into the station. Hair trims are a regular occurrence during an astronaut's six month tour.

Pile et Face: Avec du papier, des images, de la colle...et des ciseaux (Heads and Tails: With Paper, Pictures, Glue...and Scissors).

ERIC Educational Resources Information Center

Vever, Daniel

1991-01-01

A kit using the concept of puzzles as a focus for developing self-correcting instructional materials for French language teaching is described. The kit, designed for teachers and including 47 ideas organized by theme, contains matrices and cards for a variety of exercises at various levels and suggestions for their use. (MSE)

Optimization of Quantitative Proteomics Using 2-Dimensional Difference Gel Electrophoresis to Characterize Molecular Mechanisms of Chemical Warfare Nerve Agent Exposure in the Rat Brain

DTIC Science & Technology

2010-11-01

minced finely with scissors, and transferred to a pre-cooled hand-held glass dounce homogenizer. The pestle was passed through the dounce until the...Nakajima, Sarin experiences in Japan : acute toxicity and long-term effects. Journal of the Neurological Sciences, 2006. 249(1): p. 76-85. 9. Shih, T.-M

Buns, Scissors and Strawberry Laces--A Model of Science Education?

ERIC Educational Resources Information Center

Walsh, Ed; Edwards, Rebecca

2009-01-01

Models are included in the science National Curriculum because modelling is a key tool for scientists and an integral part of how science works. Modelling is explicitly referred to in the Programmes of Study for Science at Key Stage 3 and 4 (age 11-16) and in Assessing Pupil's Progress (APP). Pupils need to learn how to use models because they are…

The Development of Object Function and Manipulation Knowledge: Evidence from a Semantic Priming Study

PubMed Central

Collette, Cynthia; Bonnotte, Isabelle; Jacquemont, Charlotte; Kalénine, Solène; Bartolo, Angela

2016-01-01

Object semantics include object function and manipulation knowledge. Function knowledge refers to the goal attainable by using an object (e.g., the function of a key is to open or close a door) while manipulation knowledge refers to gestures one has to execute to use an object appropriately (e.g., a key is held between the thumb and the index, inserted into the door lock and then turned). To date, several studies have assessed function and manipulation knowledge in brain lesion patients as well as in healthy adult populations. In patients with left brain damage, a double dissociation between these two types of knowledge has been reported; on the other hand, behavioral studies in healthy adults show that function knowledge is processed faster than manipulation knowledge. Empirical evidence has shown that object interaction in children differs from that in adults, suggesting that the access to function and manipulation knowledge in children might also differ. To investigate the development of object function and manipulation knowledge, 51 typically developing 8-9-10 year-old children and 17 healthy young adults were tested on a naming task associated with a semantic priming paradigm (190-ms SOA; prime duration: 90 ms) in which a series of line drawings of manipulable objects were used. Target objects could be preceded by three priming contexts: related (e.g., knife-scissors for function; key-screwdriver for manipulation), unrelated but visually similar (e.g., glasses-scissors; baseball bat-screwdriver), and purely unrelated (e.g., die-scissors; tissue-screwdriver). Results showed a different developmental pattern of function and manipulation priming effects. Function priming effects were not present in children and emerged only in adults, with faster naming responses for targets preceded by objects sharing the same function. In contrast, manipulation priming effects were already present in 8-year-olds with faster naming responses for targets preceded by objects sharing the same manipulation and these decreased linearly between 8 and 10 years of age, 10-year-olds not differing from adults. Overall, results show that the access to object function and manipulation knowledge changes during development by favoring manipulation knowledge in childhood and function knowledge in adulthood. PMID:27602004

Needlestick and Sharps Injuries Among Nursing Students in Nanjing, China.

PubMed

Zhang, Xujun; Chen, Yu; Li, Yang; Hu, Jie; Zhang, Cong; Li, Zhen; Stallones, Lorann; Xiang, Henry

2018-06-01

Needlestick and sharps injuries (NSIs) are a major cause of occupational injuries for health care workers worldwide. In this study, the authors report the prevalence of and risk factors for NSIs among Chinese nursing students. A cross-sectional survey was distributed to 442 nursing students; 393 completed questionnaires were submitted. A total of 237 (60.3%) nursing students reported NSIs, which were more commonly reported by female students, younger students, students who worked frequent night shifts, students without safety training, and students who did not use personal protective equipment. Among those injured, 59.9% were injured by syringe needles, 21.9% by glass items, and 3.4% by scissors. Of those needles and sharps causing injuries, 36.3% of devices had been used on patients, 41% were unused, and 22.7% were unknown. Opening ampoules or vials was the most common injury agent. A total of 86.9% of NSIs were not reported to hospital infection control. Nursing students are at high risk of NSIs in China. Occupational safety training should be developed and implemented to prevent NSIs among this vulnerable population.

Endoscopic submucosal dissection for esophageal granular cell tumor using the clutch cutter

PubMed Central

Komori, Keishi; Akahoshi, Kazuya; Tanaka, Yoshimasa; Motomura, Yasuaki; Kubokawa, Masaru; Itaba, Soichi; Hisano, Terumasa; Osoegawa, Takashi; Nakama, Naotaka; Iwao, Risa; Oya, Masafumi; Nakamura, Kazuhiko

2012-01-01

Endoscopic submucosal dissection (ESD) with a knife is a technically demanding procedure associated with a high complication rate. The shortcomings of this method are the deficiencies of fixing the knife to the target lesion, and of compressing it. These shortcomings can lead to major complications such as perforation and bleeding. To reduce the risk of complications related to ESD, we developed a new grasping type scissors forceps (Clutch Cutter®, Fujifilm, Japan) which can grasp and incise the targeted tissue using an electrosurgical current. Esophagogastroduodenoscopy on a 59-year-old Japanese man revealed a 16mm esophageal submucosal nodule with central depression. Endoscopic ultrasonography demonstrated a hypoechoic solid tumor limited to the submucosa without lymph node involvement. The histologic diagnosis of the specimen obtained by biopsy was granular cell tumor. It was safely and accurately resected without unexpected incision by ESD using the CC. No delayed hemorrhage or perforation occurred. Histological examination confirmed that the granular cell tumor was completely excised with negative resection margin.We report herein a case of esophageal granular cell tumor successfully treated by an ESD technique using the CC. PMID:22267979

xEMD procedures as a data - Assisted filtering method

NASA Astrophysics Data System (ADS)

Machrowska, Anna; Jonak, Józef

2018-01-01

The article presents the possibility of using Empirical Mode Decomposition (EMD), Ensemble Empirical Mode Decomposition (EEMD), Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Improved Complete Ensemble Empirical Mode Decomposition (ICEEMD) algorithms for mechanical system condition monitoring applications. There were presented the results of the xEMD procedures used for vibration signals of system in different states of wear.

Endoscopic submucosal dissection for early esophageal neoplasms using the stag beetle knife

PubMed Central

Kuwai, Toshio; Yamaguchi, Toshiki; Imagawa, Hiroki; Miura, Ryoichi; Sumida, Yuki; Takasago, Takeshi; Miyasako, Yuki; Nishimura, Tomoyuki; Iio, Sumio; Yamaguchi, Atsushi; Kouno, Hirotaka; Kohno, Hiroshi; Ishaq, Sauid

2018-01-01

AIM To determine short- and long-term outcomes of endoscopic submucosal dissection (ESD) using the stag beetle (SB) knife, a scissor-shaped device. METHODS Seventy consecutive patients with 96 early esophageal neoplasms, who underwent ESD using a SB knife at Kure Medical Center and Chugoku Cancer Center, Japan, between April 2010 and August 2016, were retrospectively evaluated. Clinicopathological characteristics of lesions and procedural adverse events were assessed. Therapeutic success was evaluated on the basis of en bloc, histologically complete, and curative or non-curative resection rates. Overall and tumor-specific survival, local or distant recurrence, and 3- and 5-year cumulative overall metachronous cancer rates were also assessed. RESULTS Eligible patients had dysplasia/intraepithelial neoplasia (22%) or early cancers (squamous cell carcinoma, 78%). The median procedural time was 60 min and on average, the lesions measured 24 mm in diameter, yielding 33-mm tissue defects. The en bloc resection rate was 100%, with 95% and 81% of dissections deemed histologically complete and curative, respectively. All procedures were completed without accidental incisions/perforations or delayed bleeding. During follow-up (mean, 35 ± 23 mo), no local recurrences or metastases were observed. The 3- and 5-year survival rates were 83% and 70%, respectively, with corresponding rates of 85% and 75% for curative resections and 74% and 49% for non-curative resections. The 3- and 5-year cumulative rates of metachronous cancer in the patients with curative resections were 14% and 26%, respectively. CONCLUSION ESD procedures using the SB knife are feasible, safe, and effective for treating early esophageal neoplasms, yielding favorable short- and long-term outcomes. PMID:29686470

Endoscopic submucosal dissection for early esophageal neoplasms using the stag beetle knife.

PubMed

Kuwai, Toshio; Yamaguchi, Toshiki; Imagawa, Hiroki; Miura, Ryoichi; Sumida, Yuki; Takasago, Takeshi; Miyasako, Yuki; Nishimura, Tomoyuki; Iio, Sumio; Yamaguchi, Atsushi; Kouno, Hirotaka; Kohno, Hiroshi; Ishaq, Sauid

2018-04-21

To determine short- and long-term outcomes of endoscopic submucosal dissection (ESD) using the stag beetle (SB) knife, a scissor-shaped device. Seventy consecutive patients with 96 early esophageal neoplasms, who underwent ESD using a SB knife at Kure Medical Center and Chugoku Cancer Center, Japan, between April 2010 and August 2016, were retrospectively evaluated. Clinicopathological characteristics of lesions and procedural adverse events were assessed. Therapeutic success was evaluated on the basis of en bloc , histologically complete, and curative or non-curative resection rates. Overall and tumor-specific survival, local or distant recurrence, and 3- and 5-year cumulative overall metachronous cancer rates were also assessed. Eligible patients had dysplasia/intraepithelial neoplasia (22%) or early cancers (squamous cell carcinoma, 78%). The median procedural time was 60 min and on average, the lesions measured 24 mm in diameter, yielding 33-mm tissue defects. The en bloc resection rate was 100%, with 95% and 81% of dissections deemed histologically complete and curative, respectively. All procedures were completed without accidental incisions/perforations or delayed bleeding. During follow-up (mean, 35 ± 23 mo), no local recurrences or metastases were observed. The 3- and 5-year survival rates were 83% and 70%, respectively, with corresponding rates of 85% and 75% for curative resections and 74% and 49% for non-curative resections. The 3- and 5-year cumulative rates of metachronous cancer in the patients with curative resections were 14% and 26%, respectively. ESD procedures using the SB knife are feasible, safe, and effective for treating early esophageal neoplasms, yielding favorable short- and long-term outcomes.

76 FR 53324 - Airworthiness Directives; Agusta S.p.A. Model A109A, A109A II, A109C, and A109K2 Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-26

... Airworthiness Directives; Agusta S.p.A. Model A109A, A109A II, A109C, and A109K2 Helicopters AGENCY: Federal... helicopters. That EAD currently requires inspecting the main rotor scissor fitting assembly to determine if... helicopter. DATES: Effective September 12, 2011. The incorporation by reference of certain publications...

Development of a puller-buncher for harvesting southern pines without taproot attached

Treesearch

Peter Koch; S.J. Coughran

1975-01-01

A harvester-buncher that mounts on the front of a wheeled skidder has been developed to pull entire pine trees from the ground like carrots. Two elements are central to its design. The first is a scissor-type grib equipped with a pair of sout horizontal knife blades that close at the groundline and bite several inches into the stem from oposite sides of the tre. The...

Development of a puller-buncher for harvesting southern pines with taproot attached

Treesearch

P. Koch; S.J. Coughran

1975-01-01

A harvester-buncher that mounts on the front of a wheeled skidder has been developed to pull entire pine trees from the ground like carrots. Two elements are central to its design. The first is a scissors-type grip equipped with a pair of stout horizontal knife blades that close at the groundline and bite several inches into the stem from opposite sides of the tree....

Use of graph algorithms in the processing and analysis of images with focus on the biomedical data.

PubMed

Zdimalova, M; Roznovjak, R; Weismann, P; El Falougy, H; Kubikova, E

2017-01-01

Image segmentation is a known problem in the field of image processing. A great number of methods based on different approaches to this issue was created. One of these approaches utilizes the findings of the graph theory. Our work focuses on segmentation using shortest paths in a graph. Specifically, we deal with methods of "Intelligent Scissors," which use Dijkstra's algorithm to find the shortest paths. We created a new software in Microsoft Visual Studio 2013 integrated development environment Visual C++ in the language C++/CLI. We created a format application with a graphical users development environment for system Windows, with using the platform .Net (version 4.5). The program was used for handling and processing the original medical data. The major disadvantage of the method of "Intelligent Scissors" is the computational time length of Dijkstra's algorithm. However, after the implementation of a more efficient priority queue, this problem could be alleviated. The main advantage of this method we see in training that enables to adapt to a particular kind of edge, which we need to segment. The user involvement has a significant influence on the process of segmentation, which enormously aids to achieve high-quality results (Fig. 7, Ref. 13).

For AAPT: Teaching the Wave Mechanics of McLeods' Stringy Electron, Explicit Nucleons, and Through-the-Earth Projections of Constellations' Stick Figures

NASA Astrophysics Data System (ADS)

McLeod, David Matthew

2011-11-01

McLeods' NEF11#22 submission is from their same-title INVITED presentation at Frontiers in Optics 2011, San Jose, CA. It shows how Hooke's law for electron, proton and neutron strings build electromagnetic waves from strings. These are composed of spirally linked, parallel, north-pole oriented, neutrino and antineutrino strings, stable because of magnetic repulsions. Their Dumbo Proton is antineutrino-scissor cut, and compressed in the vicinity of a neutron star, where electrostatic marriage occurs with a neutrino-scissor cut, and compressed, electron, so a Mickey Neutron emerges. Strings then predict electron charge is -- 1/3 e, Dumbo P is 25 % longer than Mickey N, and Hooke says relaxing springs fuel three separate inflations after each Big Bang oscillation. Gravity can be strings longitudinally linked. Einstein says Herman Grid's black diagonals prove human vision reads its information from algebraically-signed electromagnetic field diffraction patterns known by ray-tracing, not difficult Spatial Fourier Transformation. High-schoolers understand its application to Wave Mechanics, and agree that positive-numbered probabilities do not enter to possibly displease God. Stick figure constellations detected, like Phoenix, Leo, Canis Major, and especially Orion, fool some observers into false beliefs in things like UFHumanoids, or Kokopelli, Pele and Pamola!

Behavioural and neural modulation of win-stay but not lose-shift strategies as a function of outcome value in Rock, Paper, Scissors.

PubMed

Forder, Lewis; Dyson, Benjamin James

2016-09-23

Competitive environments in which individuals compete for mutually-exclusive outcomes require rational decision making in order to maximize gains but often result in poor quality heuristics. Reasons for the greater reliance on lose-shift relative to win-stay behaviour shown in previous studies were explored using the game of Rock, Paper, Scissors and by manipulating the value of winning and losing. Decision-making following a loss was characterized as relatively fast and relatively inflexible both in terms of the failure to modulate the magnitude of lose-shift strategy and the lack of significant neural modulation. In contrast, decision-making following a win was characterized as relatively slow and relatively flexible both in terms of a behavioural increase in the magnitude of win-stay strategy and a neural modulation of feedback-related negativity (FRN) and stimulus-preceding negativity (SPN) following outcome value modulation. The win-stay/lose-shift heuristic appears not to be a unified mechanism, with the former relying on System 2 processes and the latter relying on System 1 processes. Our ability to play rationally appears more likely when the outcome is positive and when the value of wins are low, highlighting how vulnerable we can be when trying to succeed during competition.

Pilot Fullerton prepares meal on middeck

NASA Image and Video Library

1982-03-30

STS003-26-253 (30 March 1982) --- Astronaut Gordon Fullerton, STS-3 pilot, wearing communications kit assembly (assy) mini-headset (HDST), prepares meal on middeck. Fullerton clips corner of rehydratable food (cereal) package with scissors. The opening will allow Fullerton to insert JSC water dispenser kit water gun in order to heat contents with hot water. Meal tray assembly is secured to forward middeck locker and holds additional food packages and beverage containers. Photo credit: NASA

Close-up locker scene of material belonging to Payload specialist Neri

NASA Technical Reports Server (NTRS)

1985-01-01

Close-up locker scene of materials belonging to Payload specialist Rodolfo Neri. Items include a Morelos satellite decal, the crest of the Universidad Nacional Autonoma de Mexico (Neri's alma mater), and one of the plant experiments he monitored during the flight. The experiment at bottom frame is the Transportation of Nutrients in a Weightless Environment (TRANSPORT). A pair of scissors are on the locker and a pen floats above it.

Astronaut Jerry Linenger with sheet of TIPS correspondence

NASA Image and Video Library

1994-09-15

STS064-23-025 (9-20 Sept. 1994) --- With scissors in hand, astronaut Jerry M. Linenger, STS-64 mission specialist, prepares to cut off a lengthy sheet of correspondence from ground controllers. Called the Thermal Imaging Printing System (TIPS), the message center occupies a stowage locker on the space shuttle Discovery's middeck. Astronaut L. Blaine Hammond, pilot, retrieves a clothing item from a nearby locker. Photo credit: NASA or National Aeronautics and Space Administration

Bioengineered Skin From Stem Cells for Treatment of Cutaneous Vesicant Injury

DTIC Science & Technology

2006-11-01

sterile gauze; the gauze was dipped into the decontamination solution using forceps and gently applied to the injury site using circular motions...weight ratio of the skin biopsy of the animals exposed to CEES and treated with either bioengineered skin or saline. Briefly, at different time...The CEES + saline or CEES + bioengineered skin treated areas were excised using a sterile blade, scissors, and forceps . Half of the skin sample

Ki-67 Expression in Human Tumors Measured by Flow Cytometry

DTIC Science & Technology

1990-01-01

Analyzed Fresh tissues obtained from the lymph node biopsies of 30 patients diagnosed as having non-Hodgkin’s lymphoma, nine biopsies identified as...breast tumors, and eight biopsies identified as colon tumors were included in this study. Cell Lines K562 Cell Line The human ervthroleukemia cell line...petri dish. While holding the tissue with toothed forceps , it wa,-is minced with scissors. Ujsing at transfer pip:., tissue fragments we re aspirated

Block by Block: The Challenges of Urban Operations

DTIC Science & Technology

2003-01-01

So the game of measures and coun- termeasures—the adult, and much more deadly, version of the familiar children’s game of rock, scissors, paper—has...January 1995 that, even when badly outmanned and outequipped, the city offered them unique advantages— familiarity with the terrain, the element of... familiar with the conditions of urban fighting was Ratko Mladiæ. He later emerged as the overall Bosnian Serb commander at Sarajevo. Third, the

Reexamining the role of the ( n , γ f ) process in the low-energy fission of U 235 and Pu 239

DOE PAGES

Lynn, J. E.; Talou, P.; Bouland, O.

2018-06-01

In this paper, themore » $$(n,{\\gamma}f)$$ process is reviewed in light of modern nuclear reaction calculations in both slow and fast neutron-induced fission reactions on $$^{235}\\mathrm{U}$$ and $$^{239}\\mathrm{Pu}$$. Observed fluctuations of the average prompt fission neutron multiplicity and average total $${\\gamma}$$-ray energy below 100-eV incident neutron energy are interpreted in this framework. The surprisingly large contribution of the $M1$ transitions to the prefission $${\\gamma}$$-ray spectrum of $$^{239}\\mathrm{Pu}$$ is explained by the dominant fission probabilities of $${0}^{+}$$ and $${2}^{+}$$ transition states, which can only be accessed from compound nucleus states formed by the interaction of $s$-wave neutrons with the target nucleus in its ground state, and decaying through $M1$ transitions. The impact of an additional low-lying $M1$ scissors mode in the photon strength function is analyzed. We review experimental evidence for fission fragment mass and kinetic-energy fluctuations in the resonance region and their importance in the interpretation of experimental data on prompt neutron data in this region. In conclusion, calculations are extended to the fast energy range where $$(n,{\\gamma}f)$$ corrections can account for up to 3% of the total fission cross section and about 20% of the capture cross section.« less

Reexamining the role of the ( n , γ f ) process in the low-energy fission of U 235 and Pu 239

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn, J. E.; Talou, P.; Bouland, O.

In this paper, themore » $$(n,{\\gamma}f)$$ process is reviewed in light of modern nuclear reaction calculations in both slow and fast neutron-induced fission reactions on $$^{235}\\mathrm{U}$$ and $$^{239}\\mathrm{Pu}$$. Observed fluctuations of the average prompt fission neutron multiplicity and average total $${\\gamma}$$-ray energy below 100-eV incident neutron energy are interpreted in this framework. The surprisingly large contribution of the $M1$ transitions to the prefission $${\\gamma}$$-ray spectrum of $$^{239}\\mathrm{Pu}$$ is explained by the dominant fission probabilities of $${0}^{+}$$ and $${2}^{+}$$ transition states, which can only be accessed from compound nucleus states formed by the interaction of $s$-wave neutrons with the target nucleus in its ground state, and decaying through $M1$ transitions. The impact of an additional low-lying $M1$ scissors mode in the photon strength function is analyzed. We review experimental evidence for fission fragment mass and kinetic-energy fluctuations in the resonance region and their importance in the interpretation of experimental data on prompt neutron data in this region. In conclusion, calculations are extended to the fast energy range where $$(n,{\\gamma}f)$$ corrections can account for up to 3% of the total fission cross section and about 20% of the capture cross section.« less

Partially coherent surface plasmon modes

NASA Astrophysics Data System (ADS)

Niconoff, G. M.; Vara, P. M.; Munoz-Lopez, J.; Juárez-Morales, J. C.; Carbajal-Dominguez, A.

2011-04-01

Elementary long-range plasmon modes are described assuming an exponential dependence of the refractive index in the neighbourhood of the interface dielectric-metal thin film. The study is performed using coupling mode theory. The interference between two long-range plasmon modes generated that way allows the synthesis of surface sinusoidal plasmon modes, which can be considered as completely coherent generalized plasmon modes. These sinusoidal plasmon modes are used for the synthesis of new partially coherent surface plasmon modes, which are obtained by means of an incoherent superposition of sinusoidal plasmon modes where the period of each one is considered as a random variable. The kinds of surface modes generated have an easily tuneable profile controlled by means of the probability density function associated to the period. We show that partially coherent plasmon modes have the remarkable property to control the length of propagation which is a notable feature respect to the completely coherent surface plasmon mode. The numerical simulation for sinusoidal, Bessel, Gaussian and Dark Hollow plasmon modes are presented.

A Wind Tunnel Investigation of Joined Wing Scissor Morphing

DTIC Science & Technology

2006-06-01

would use the low sweep for carrier landing and subsonic cruise, and use the high sweep for 12 supersonic flight [13]. According to Raymer [19...Wright-Patterson AFB, Ohio: Air Force Institute of Technology, 2005. 12. Katz, Joseph, Shaun Byrne, and Robert Hahl. "Stall Resistance Features of...Lifting-Body Airplane Configurations." Journal of Aircraft 2nd ser. 36 (1999): 471-474. 13. Kress, Robert W. "Variable Sweep Wing Design." AIAA 83

Decidual tissue growth and regression in the guinea pig: regulation by uterine blood flow and relation to circulating progesterone concentrations.

PubMed

Garris, D R

1984-05-01

The role of uterine blood flow (UBF) in the modulation of experimentally induced decidua formation was assessed in mature guinea pigs. The response to endometrial trauma, as indexed by uterine weight changes, was dependent upon the type of stimulus used, with deciduogenic effectiveness as follows: saline = oil = knife scratch less than scissor cut. Both the knife scratch and scissor cut techniques induced elevations in UBF compared with control values. Neither uterine weight nor UBF increased when trauma was applied to unresponsive uteri, indicating that inflammation was not the cause of uterine hyperemia. Uterine weight increased from basal levels on the day of trauma (i.e. day 5 of the estrous cycle) to a maximal weight between days 10 and 12 posttrauma. Maximal growth of the induced decidua occurred under conditions of elevated UBF. Subsequently, UBF declined between days 10 and 15 posttrauma, preceding the associate resorption of the induced decidua. During the period of decidua growth, serum progesterone levels were elevated compared with those in control animals. These data indicate that experimentally induced decidua formation in the guinea pig is associated with uterine hyperemia and increased corpus luteum activity, both of which are necessary for proper endometrial differentiation. It is hypothesized that these events mimic the uterine hyperemia associated with blastocyst implanplantation and early placentation in this species.

A refined surgical treatment modality for bromhidrosis: Subcutaneous scissor with micropore.

PubMed

Dai, Yeqin; Xu, Ai-E; He, Junhua

2017-05-01

Axillary bromhidrosis has a strong negative effect on one's social life. A high success rate and few complications are criteria for a surgical treatment. The objective of this study was to evaluate a new surgical treatment modality for bromhidrosis: subcutaneous scissor with micropore. Twenty patients with bromhidrosis were treated. Patients were placed in a supine position with their treated arms abducted to 110°. After injection of 60 mL of tumescent solution into each axilla, one small incision was made at the middle axillary of the hair-bearing area. The whole hair-bearing skin was undermined at the level of the superficial fat to obtain adequate skin eversion. The flaps were everted to offer full exposure of the apocrine glands, and meticulous excision of each gland was performed. Both sides were punctured with scalpel. The micropore was used for drainage, and whose width was just 3 mm. Finally, the incisions were re-approximated, and bulky compressive dressings were applied to the area for 72 hours. Of the 40 axillae (20 patients), 34 (85.0%) showed excellent results, and six (15.0%) had good results. Malodor was significantly decreased. There were no serious complications. This technique can produce excellent results with a lower complication rate than most other surgical modalities and can be performed without costly equipment. © 2017 Wiley Periodicals, Inc.

An Experimental Investigation of Dextrous Robots Using EVA Tools and Interfaces

NASA Technical Reports Server (NTRS)

Ambrose, Robert; Culbert, Christopher; Rehnmark, Frederik

2001-01-01

This investigation of robot capabilities with extravehicular activity (EVA) equipment looks at how improvements in dexterity are enabling robots to perform tasks once thought to be beyond machines. The approach is qualitative, using the Robonaut system at the Johnson Space Center (JSC), performing task trials that offer a quick look at this system's high degree of dexterity and the demands of EVA. Specific EVA tools attempted include tether hooks, power torque tools, and rock scoops, as well as conventional tools like scissors, wire strippers, forceps, and wrenches. More complex EVA equipment was also studied, with more complete tasks that mix tools, EVA hand rails, tethers, tools boxes, PIP pins, and EVA electrical connectors. These task trials have been ongoing over an 18 month period, as the Robonaut system evolved to its current 43 degree of freedom (DOF) configuration, soon to expand to over 50. In each case, the number of teleoperators is reported, with rough numbers of attempts and their experience level, with a subjective difficulty rating assigned to each piece of EVA equipment and function. JSC' s Robonaut system was successful with all attempted EVA hardware, suggesting new options for human and robot teams working together in space.

Evaluation of training programme uptake in an attempt to reduce obstetric anal sphincter injuries: the SUPPORT programme.

PubMed

Rahman, Nadia; Vinayakarao, Latha; Pathak, Sangeeta; Minden, Dawn; Melson, Louise; Vitue, Ella; Pradhan, A

2017-03-01

The objective was to assess the feedback from a quality improvement training programme to reduce obstetric anal sphincter injuries (OASIS). Training sessions were organised that included evidence-based information on OASIS risk factors and training on models to measure perineal body length (PBL), perform episiotomies with standard and 60° fixed angle scissors (EPISCISSORS-60®), and measure post-delivery episiotomy suture angles with protractor transparencies. Feedback forms using a Likert scale (1-4) were completed and analysed. The setting was an evidence-based quality improvement programme (Strategy for Using Practical aids for Prevention of OASIS, Recording episiotomies and clinician Training [SUPPORT]) at two National Health Service (NHS) Hospitals in the UK. The participants were midwives and doctors attending the SUPPORT training programme RESULTS: All of the participants (100 %) would recommend the training programme to a friend or colleague. 92 % felt that the training session improved their knowledge of the impact of PBL and perineal distension and their knowledge of the relationship between episiotomy angle and OASIS "a lot" or "somewhat". Based on this feedback, we recommend the addition of the knowledge content of the SUPPORT programme to other centres providing perineal assessment and repair courses.

Switching dynamics of doped CoFeB trilayers and a comparison to the quasistatic approximation

NASA Astrophysics Data System (ADS)

Forrester, Michael; Kusmartsev, Feodor; Kovács, Endre

2013-05-01

The investigation of the switching times of the magnetization reversal of two interacting CoFeB nanomagnets, with dimensions small enough to maintain a single-domain structure, has been carried out. A quasistatic approximation is shown to give valid results and to compare well to the damped dynamical solutions of the Landau-Lifshitz-Gilbert equations. The characteristics of the switching are shown in the associated hysteresis loops and we build a complete phase diagram of the various parallel, antiparallel, and scissoring states of the magnetization in terms of the coupling energy between the nanomagnets, magnetic anisotropy, and the interaction with an applied magnetic field. The phase diagram summarizes the different kinds of hysteresis associated with the magnetization reversal phenomena. The switching fields and times are estimated and the vulnerabilities of the magnetic phases to thermally induced magnetic field variations are examined. The stability of the phases is a fine balance between intrinsic and extrinsic magnetism and we examine its precarious nature. Our work identifies the structures that have the most robust magnetization states and hence a design ethic for creating nanomagnetic heterostructures with outstanding magnetoresistance properties based upon the two magnetic elements.

The Replicator Equation on Graphs

PubMed Central

Ohtsuki, Hisashi; Nowak, Martin A.

2008-01-01

We study evolutionary games on graphs. Each player is represented by a vertex of the graph. The edges denote who meets whom. A player can use any one of n strategies. Players obtain a payoff from interaction with all their immediate neighbors. We consider three different update rules, called ‘birth-death’, ‘death-birth’ and ‘imitation’. A fourth update rule, ‘pairwise comparison’, is shown to be equivalent to birth-death updating in our model. We use pair-approximation to describe the evolutionary game dynamics on regular graphs of degree k. In the limit of weak selection, we can derive a differential equation which describes how the average frequency of each strategy on the graph changes over time. Remarkably, this equation is a replicator equation with a transformed payoff matrix. Therefore, moving a game from a well-mixed population (the complete graph) onto a regular graph simply results in a transformation of the payoff matrix. The new payoff matrix is the sum of the original payoff matrix plus another matrix, which describes the local competition of strategies. We discuss the application of our theory to four particular examples, the Prisoner’s Dilemma, the Snow-Drift game, a coordination game and the Rock-Scissors-Paper game. PMID:16860343

Magsat - A new satellite to survey the earth's magnetic field

NASA Technical Reports Server (NTRS)

Mobley, F. F.; Eckard, L. D.; Fountain, G. H.; Ousley, G. W.

1980-01-01

The Magsat satellite was launched on Oct. 30, 1979 into a sun-synchronous dawn-dusk orbit, of 97 deg inclination, 350 km perigee, and 550 km apogee. It contains a precision vector magnetometer and a cesium-vapor scalar magnetometer at the end of a 6-m long graphite epoxy scissors boom. The magnetometers are accurate to 2 nanotesla. A pair of star cameras are used to define the body orientation to 10 arc sec rms. An 'attitude transfer system' measures the orientation of the magnetometer sensors relative to the star cameras to approximately 5 arc sec rms. The satellite position is determined to 70 meters rms by Doppler tracking. The overall objective is to determine each component of the earth's vector magnetic field to an accuracy of 6 nanotesla rms. The Magsat satellite gathers a complete picture of the earth's magnetic field every 12 hours. The vector components are sampled 16 times per second with a resolution of 0.5 nanotesla. The data will be used by the U.S. Geological Survey to prepare 1980 world magnetic field charts and to detect large-scale magnetic anomalies in the earth's crust for use in planning resource exploration strategy.

Task 4 completion report for 40 Kilowatt grid connected modification contract

NASA Technical Reports Server (NTRS)

Vogt, J. H.

1983-01-01

Startup, operation in grid connect mode, shutdown from grid connects, operation in isolated mode, shutdown from isolated mode, steady state operation, mode transfers, and voltage disconnects are addressed.

Dishwasher For Earth Or Outer Space

NASA Technical Reports Server (NTRS)

Tromble, Jon D.

1991-01-01

Dishwashing machine cleans eating utensils in either Earth gravity or zero gravity of outer space. Cycle consists of three phases: filling, washing, and draining. Rotation of tub creates artificial gravity aiding recirculation of water during washing phase in absence of true gravity. Centrifugal air/water separator helps system function in zero gravity. Self-cleaning filter contains interdigitating blades catching solid debris when water flows between them. Later, blades moved back and forth in scissor-like manner to dislodge debris, removed by backflow of water.

How to build a model illustrating sea-floor spreading and subduction

USGS Publications Warehouse

Lahr, J.C.

1999-01-01

This report describes how to build a model of the outer 300 km (180 miles) of the Earth that can be used to develop a better understanding of the principal features of plate tectonics, including sea-floor spreading, the pattern of magnetic stripes frozen into the sea floor, transform faulting, thrust faulting, subduction, and volcanism. In addition to a paper copy of this report, the materials required are a cardboard shoebox, glue, scissors, straight edge, and safety razor blade.

Passive PE Sampling in Support of In Situ Remediation of Contaminated Sediments: Standard Operating Procedure for PE Analysis

DTIC Science & Technology

2012-12-01

4.5 Food-grade aluminum foil 4.6 Stainless steel forceps 4.7 Single-edge razor blades 4.8 Teflon (or similar non-contaminating material) cutting...handling PE to avoid cross-contaminating the PE. 6.3 Methylene chloride (pesticide grade) rinsed, stainless steel forceps and scissors are used...3.1 PE is susceptible to contamination from atmospheric and surfaces, and so it must be handled using clean techniques. 3.2 While the formation of

Astronaut Rhea Seddon works on flyswatter-like snagging device

NASA Technical Reports Server (NTRS)

1985-01-01

Astronaut Rhea Seddon begins works on flyswatter-like snagging device to be used as an extension to the remote manipulator system (RMS) arm on Discovery for an attempt to trip a lever on the troubled Syncom-IV satellite. She is seated on the floor of the aft flight deck with a pair of scissors in her mouth. She is using an exacto knife to cut the extension out of plastic. Her jacket is floating in the bottom right edge of the frame.

Effect of epidemic spreading on species coexistence in spatial rock-paper-scissors games.

PubMed

Wang, Wen-Xu; Lai, Ying-Cheng; Grebogi, Celso

2010-04-01

A fundamental question in nonlinear science and evolutionary biology is how epidemic spreading may affect coexistence. We address this question in the framework of mobile species under cyclic competitions by investigating the roles of both intra- and interspecies spreading. A surprising finding is that intraspecies infection can strongly promote coexistence while interspecies spreading cannot. These results are quantified and a theoretical paradigm based on nonlinear partial differential equations is derived to explain the numerical results.

Research on Method of Interactive Segmentation Based on Remote Sensing Images

NASA Astrophysics Data System (ADS)

Yang, Y.; Li, H.; Han, Y.; Yu, F.

2017-09-01

In this paper, we aim to solve the object extraction problem in remote sensing images using interactive segmentation tools. Firstly, an overview of the interactive segmentation algorithm is proposed. Then, our detailed implementation of intelligent scissors and GrabCut for remote sensing images is described. Finally, several experiments on different typical features (water area, vegetation) in remote sensing images are performed respectively. Compared with the manual result, it indicates that our tools maintain good feature boundaries and show good performance.

Studies in tilt rotor VTOL aircraft aeroelasticity, volume 2. Ph.D. Thesis - Case Western Reserve Univ.

NASA Technical Reports Server (NTRS)

Kvaternik, R. G.

1973-01-01

Two methods for natural mode vibration analysis are discussed. The first consists of a direct approach based on a finite element representation of the complete structure as an entity. The mass and stiffness matrices for the complete structure are assembled by properly combining the mass and stiffness matrices of the individual elements into which the structure has been divided. The second approach is that of component mode synthesis. This method is based on the concept of synthesizing the natural modes of the complete structure from modes of conveniently difined substructures, or components, into which the structure has been partitioned. In this way the expedient of reducing the system degrees of freedom, and thus the size of the eigenvalue problem, can be introduced by partial modal synthesis.

Evaluation of mode equivalence of the MSKCC Bowel Function Instrument, LASA Quality of Life, and Subjective Significance Questionnaire items administered by Web, interactive voice response system (IVRS), and paper.

PubMed

Bennett, Antonia V; Keenoy, Kathleen; Shouery, Marwan; Basch, Ethan; Temple, Larissa K

2016-05-01

To assess the equivalence of patient-reported outcome (PRO) survey responses across Web, interactive voice response system (IVRS), and paper modes of administration. Postoperative colorectal cancer patients with home Web/e-mail and phone were randomly assigned to one of the eight study groups: Groups 1-6 completed the survey via Web, IVRS, and paper, in one of the six possible orders; Groups 7-8 completed the survey twice, either by Web or by IVRS. The 20-item survey, including the MSKCC Bowel Function Instrument (BFI), the LASA Quality of Life (QOL) scale, and the Subjective Significance Questionnaire (SSQ) adapted to bowel function, was completed from home on consecutive days. Mode equivalence was assessed by comparison of mean scores across modes and intraclass correlation coefficients (ICCs) and was compared to the test-retest reliability of Web and IVRS. Of 170 patients, 157 completed at least one survey and were included in analysis. Patients had mean age 56 (SD = 11), 53% were male, 81% white, 53% colon, and 47% rectal cancer; 78% completed all assigned surveys. Mean scores for BFI total score, BFI subscale scores, LASA QOL, and adapted SSQ varied by mode by less than one-third of a score point. ICCs across mode were: BFI total score (Web-paper = 0.96, Web-IVRS = 0.97, paper-IVRS = 0.97); BFI subscales (range = 0.88-0.98); LASA QOL (Web-paper = 0.98, Web-IVRS = 0.78, paper-IVRS = 0.80); and SSQ (Web-paper = 0.92, Web-IVRS = 0.86, paper-IVRS = 0.79). Mode equivalence was demonstrated for the BFI total score, BFI subscales, LASA QOL, and adapted SSQ, supporting the use of multiple modes of PRO data capture in clinical trials.

Collaboration of doctors and nurses with ethnomedical practitioners.

PubMed

Bastien, J W

1994-01-01

In Bolivia, workshops serve as a means for biomedical practitioners and Aymara and Quechua ethnomedical practitioners from the Andes to share information about illnesses. The traditional practitioners demonstrate and biomedical personnel participate in curing rituals. Joint therapy sessions and development of joint strategies to improve health are included. Participants list the names, symptoms, causes, and treatments of diarrhea in a column for ethnomedicine and another for biomedicine. Biomedical and ethnomedical practitioners work together to persuade indigenous peoples to overcome their fear of and resistance to vaccination. One way to achieve this is by having people examine unsterilized knives under the microscope to see the tetanus toxoid. Physicians tend not to respect midwives and traditional birth attendants (TBAs). Biomedical trainers are not trained in and/or undervalue ethnomedicine, and can introduce midwives and TBAs to unhealthy practices. For example, they insist on scissors to cut the umbilical cord, but scissors are hard to sterilize, resulting in increased rates of neonatal tetanus. Women trained in medical anthropology, cross-cultural communication, and public health are the best trainers of TBAs and midwives. Supervision is needed to integrate TBAs and midwives into health programs and to improve their skills. Herbalism and ritual healing are more popular than the rural health care delivery system. Integrated clinics attract more clients than standard clinics. Recommended guidelines on collaboration revolve around recognition and respect of traditional healers, rewards for biomedical and ethnomedical personnel who collaborate, and issuance of health cards so both sets of practitioners can view patients' medical histories.

Vibration control of an energy regenerative seat suspension with variable external resistance

NASA Astrophysics Data System (ADS)

Ning, Donghong; Sun, Shuaishuai; Du, Haiping; Li, Weihua; Zhang, Nong

2018-06-01

In this paper, an energy regenerative seat suspension with a variable external resistance is proposed and built, and a semi-active controller for its vibration control is also designed and validated. The energy regenerative seat suspension is built with a three-phase generator and a gear reducer, which are installed in the scissors structure centre of the seat suspension, and the vibration energy is directly harvested from the rotary movement of suspension's scissors structure. The electromagnetic torque of the semi-active seat suspension actuator is controlled by an external variable resistor. An integrated model including the seat suspension's kinematics and the generator is built and proven to match the test result very well. A simplified experimental phenomenon model is also built based on the test results for the controller design. A state feedback H∞ controller is proposed for the regenerative seat suspension's semi-active vibration control. The proposed regenerative seat suspension and its controller are validated with both simulations and experiments. A well-tuned passive seat suspension is applied to evaluate the regenerative seat's performance. Based on ISO 2631-1, the frequency-weighted root mean square (FW-RMS) acceleration of the proposed seat suspension has a 22.84% reduction when compared with the passive one, which indicates the improvement of ride comfort. At the same time, the generated RMS power is 1.21 W. The proposed regenerative seat suspension can greatly improve the driver's ride comfort and has the potential to be developed to a self-powered semi-active system.

Optimal actuator location within a morphing wing scissor mechanism configuration

NASA Astrophysics Data System (ADS)

Joo, James J.; Sanders, Brian; Johnson, Terrence; Frecker, Mary I.

2006-03-01

In this paper, the optimal location of a distributed network of actuators within a scissor wing mechanism is investigated. The analysis begins by developing a mechanical understanding of a single cell representation of the mechanism. This cell contains four linkages connected by pin joints, a single actuator, two springs to represent the bidirectional behavior of a flexible skin, and an external load. Equilibrium equations are developed using static analysis and the principle of virtual work equations. An objective function is developed to maximize the efficiency of the unit cell model. It is defined as useful work over input work. There are two constraints imposed on this problem. The first is placed on force transferred from the external source to the actuator. It should be less than the blocked actuator force. The other is to require the ratio of output displacement over input displacement, i.e., geometrical advantage (GA), of the cell to be larger than a prescribed value. Sequential quadratic programming is used to solve the optimization problem. This process suggests a systematic approach to identify an optimum location of an actuator and to avoid the selection of location by trial and error. Preliminary results show that optimum locations of an actuator can be selected out of feasible regions according to the requirements of the problem such as a higher GA, a higher efficiency, or a smaller transferred force from external force. Results include analysis of single and multiple cell wing structures and some experimental comparisons.

Evolution of restraint in a structured rock–paper–scissors community

PubMed Central

Nahum, Joshua R.; Harding, Brittany N.; Kerr, Benjamin

2011-01-01

It is not immediately clear how costly behavior that benefits others evolves by natural selection. By saving on inherent costs, individuals that do not contribute socially have a selective advantage over altruists if both types receive equal benefits. Restrained consumption of a common resource is a form of altruism. The cost of this kind of prudent behavior is that restrained individuals give up resources to less-restrained individuals. The benefit of restraint is that better resource management may prolong the persistence of the group. One way to dodge the problem of defection is for altruists to interact disproportionately with other altruists. With limited dispersal, restrained individuals persist because of interaction with like types, whereas it is the unrestrained individuals that must face the negative long-term consequences of their rapacity. Here, we study the evolution of restraint in a community of three competitors exhibiting a nontransitive (rock–paper–scissors) relationship. The nontransitivity ensures a form of negative feedback, whereby improvement in growth of one competitor has the counterintuitive consequence of lowering the density of that improved player. This negative feedback generates detrimental long-term consequences for unrestrained growth. Using both computer simulations and evolution experiments with a nontransitive community of Escherichia coli, we find that restrained growth can evolve under conditions of limited dispersal in which negative feedback is present. This research, thus, highlights a set of ecological conditions sufficient for the evolution of one form of altruism. PMID:21690371

Evolution of restraint in a structured rock-paper-scissors community.

PubMed

Nahum, Joshua R; Harding, Brittany N; Kerr, Benjamin

2011-06-28

It is not immediately clear how costly behavior that benefits others evolves by natural selection. By saving on inherent costs, individuals that do not contribute socially have a selective advantage over altruists if both types receive equal benefits. Restrained consumption of a common resource is a form of altruism. The cost of this kind of prudent behavior is that restrained individuals give up resources to less-restrained individuals. The benefit of restraint is that better resource management may prolong the persistence of the group. One way to dodge the problem of defection is for altruists to interact disproportionately with other altruists. With limited dispersal, restrained individuals persist because of interaction with like types, whereas it is the unrestrained individuals that must face the negative long-term consequences of their rapacity. Here, we study the evolution of restraint in a community of three competitors exhibiting a nontransitive (rock-paper-scissors) relationship. The nontransitivity ensures a form of negative feedback, whereby improvement in growth of one competitor has the counterintuitive consequence of lowering the density of that improved player. This negative feedback generates detrimental long-term consequences for unrestrained growth. Using both computer simulations and evolution experiments with a nontransitive community of Escherichia coli, we find that restrained growth can evolve under conditions of limited dispersal in which negative feedback is present. This research, thus, highlights a set of ecological conditions sufficient for the evolution of one form of altruism.

Custom-Designed Molecular Scissors for Site-Specific Manipulation of the Plant and Mammalian Genomes

NASA Astrophysics Data System (ADS)

Kandavelou, Karthikeyan; Chandrasegaran, Srinivasan

Zinc finger nucleases (ZFNs) are custom-designed molecular scissors, engineered to cut at specific DNA sequences. ZFNs combine the zinc finger proteins (ZFPs) with the nonspecific cleavage domain of the FokI restriction enzyme. The DNA-binding specificity of ZFNs can be easily altered experimentally. This easy manipulation of the ZFN recognition specificity enables one to deliver a targeted double-strand break (DSB) to a genome. The targeted DSB stimulates local gene targeting by several orders of magnitude at that specific cut site via homologous recombination (HR). Thus, ZFNs have become an important experimental tool to make site-specific and permanent alterations to genomes of not only plants and mammals but also of many other organisms. Engineering of custom ZFNs involves many steps. The first step is to identify a ZFN site at or near the chosen chromosomal target within the genome to which ZFNs will bind and cut. The second step is to design and/or select various ZFP combinations that will bind to the chosen target site with high specificity and affinity. The DNA coding sequence for the designed ZFPs are then assembled by polymerase chain reaction (PCR) using oligonucleotides. The third step is to fuse the ZFP constructs to the FokI cleavage domain. The ZFNs are then expressed as proteins by using the rabbit reticulocyte in vitro transcription/translation system and the protein products assayed for their DNA cleavage specificity.

Evidence for the Presence of Hn-PAHs in Post AGB Stars

NASA Technical Reports Server (NTRS)

Materese, Christopher K.; Bregman, Jesse D.; Sandford, Scott A.

2017-01-01

Polycyclic aromatic hydrocarbons (PAHs) are believed to be ubiquitous in space therefore represent an important class of molecules for the field of astrochemistry. PAHs are relatively stable under interstellar conditions, account for a significant fraction of the known Universe's molecular carbon inventory, and are believed responsible for numerous telltale interstellar infrared emission bands. PAHs can be subdivided into numerous classes, one of which is Hydrogenated PAHs (Hn-PAHs). Hn-PAHs are multi-ringed partially aromatic compounds with excess hydrogenation, leading to a partial disruption of the aromatic system. The infrared spectra of these compounds produce telltale signatures that make them distinct from ordinary aromatic or aliphatic molecules (or a mixture of both). Hn-PAHs may be an important subclass of PAHs that could explain the spectra of some astronomical objects with anomalously large 3.4 micron features. The 3.4 micron feature observed in these objects may be associated with the aliphatic C-H stretching vibrations of the excess hydrogen. If this presumption is correct, we also expect to observe methylene scissoring modes at 6.9 microns. We have recently conducted a series of follow-up observations to compliment our laboratory experiments into the properties of Hn-PAHs. Here we present our laboratory and observational results in support of the hypothesis that Hn-PAHs are a viable candidate molecule as the emission source for numerous post-asymptotic giant branch objects with abnormally large 3.4 micron features.

Review of Livermore-Led Neutron Capture Studies Using DANCE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, W; Sheets, S; Agvaanluvsan, U

2007-05-11

We have made neutron capture cross-section measurements using the white neutron source at the Los Alamos Science Center, the DANCE detector array (Detector for Advanced Neutron Capture Experiments) and targets important for basic science and stockpile stewardship. In this paper, we review results from (n,{gamma}) reactions on {sup 94,95}Mo, {sup 152,154,157,160,nat}Gd, {sup 151,153}Eu and {sup 242m}Am for neutron energies from < 1eV up to {approx} 20 keV. We measured details of the {gamma}-ray cascade following neutron capture, for comparison with results of statistical model simulations. We determined the neutron energy dependent (n,{gamma}) cross section and gained information about statistical decaymore » properties, including the nuclear level density and the photon strength function. Because of the high granularity of the detector array, it is possible to look at gamma cascades with a specified number of transitions (a specific multiplicity). We simulated {gamma}-ray cascades using a combination of the DICEBOX/GEANT computer codes. In the case of the deformed nuclei, we found evidence of a scissors-mode resonance. For the Eu, we also determined the (n,{gamma}) cross sections. For the {sup 94,95}Mo, we focused on the spin and parity assignments of the resonances and the determination of the photon strength functions for the compound nuclei {sup 95,96}Mo. Future plans include measurements on actinide targets; our immediate interest is in {sup 242m}Am.« less

The "Hitch Stitch": An Effective Method of Preventing Migration in High Tracheal Stenosis.

PubMed

Mehta, Ravindra M; Singla, Abhinav; Shah, Aashish; Loknath, Chakravarthi

2017-01-01

The incidence of caudal stent migration in high tracheal stenting is 13-21% and is common with silicone stents. This can lead to major problems, including emergency repeat procedures. Several antimigration methods are described, but have limitations in terms of their success rate, availability, cost or ease of the procedure. We describe an innovative method of stent migration prevention using a simple percutaneous anchoring "hitch stitch", validated in a large series. After tracheal stent placement, an Ethilon suture was passed into the stent lumen through an 18-G needle. To take this suture back to the exterior to complete the stitch, a retrieval loop was passed through another 14-G percutaneous cannula inserted into the stent lumen. Bronchoscopically, using a forceps the first suture was pulled inside the loop, the loop was retracted, the suture was exteriorized, and the knot was completed and embedded subcutaneously. While removing the stent, an endoscopic scissor was used to cut the stitch to free the stent. A total of 42 "hitch stitches" were done in 29 patients over 5 years, predominantly for silicone stents. Indications for stenting included postintubation tracheal stenosis (83.3%), malignancy (11.9%) and tracheoesophageal fistula (4.8%, metal stents). The procedure was successful in 41/42 (97.6%) patients. Stitch removal was uncomplicated. This is the largest series of an external stent anchoring procedure as a migration prevention strategy in high tracheal stenting, applicable to both silicone and metal stents. Stent migration prevention using this "hitch stitch" is simple, safe and successful, without any complications during stent removal. © 2016 S. Karger AG, Basel.

Infrared absorption of CH3OSO and CD3OSO radicals produced upon photolysis of CH3OS(O)Cl and CD3OS(O)Cl in p-H2 matrices.

PubMed

Lee, Yu-Fang; Kong, Lin-Jun; Lee, Yuan-Pern

2012-03-28

Irradiation at 239 ± 20 nm of a p-H(2) matrix containing methoxysulfinyl chloride, CH(3)OS(O)Cl, at 3.2 K with filtered light from a medium-pressure mercury lamp produced infrared (IR) absorption lines at 3028.4 (attributable to ν(1), CH(2) antisymmetric stretching), 2999.5 (ν(2), CH(3) antisymmetric stretching), 2950.4 (ν(3), CH(3) symmetric stretching), 1465.2 (ν(4), CH(2) scissoring), 1452.0 (ν(5), CH(3) deformation), 1417.8 (ν(6), CH(3) umbrella), 1165.2 (ν(7), CH(3) wagging), 1152.1 (ν(8), S=O stretching mixed with CH(3) rocking), 1147.8 (ν(9), S=O stretching mixed with CH(3) wagging), 989.7 (ν(10), C-O stretching), and 714.5 cm(-1) (ν(11), S-O stretching) modes of syn-CH(3)OSO. When CD(3)OS(O)Cl in a p-H(2) matrix was used, lines at 2275.9 (ν(1)), 2251.9 (ν(2)), 2083.3 (ν(3)), 1070.3 (ν(4)), 1056.0 (ν(5)), 1085.5 (ν(6)), 1159.7 (ν(7)), 920.1 (ν(8)), 889.0 (ν(9)), 976.9 (ν(10)), and 688.9 (ν(11)) cm(-1) appeared and are assigned to syn-CD(3)OSO; the mode numbers correspond to those used for syn-CH(3)OSO. The assignments are based on the photolytic behavior and a comparison of observed vibrational wavenumbers, infrared intensities, and deuterium isotopic shifts with those predicted with the B3P86∕aug-cc-pVTZ method. Our results extend the previously reported four transient IR absorption bands of gaseous syn-CH(3)OSO near 2991, 2956, 1152, and 994 cm(-1) to 11 lines, including those associated with C-O, O-S, and S=O stretching modes. Vibrational wavenumbers of syn-CD(3)OSO are new. These results demonstrate the advantage of a diminished cage effect of solid p-H(2) such that the Cl atom, produced via UV photodissociation of CH(3)OS(O)Cl in situ, might escape from the original cage to yield isolated CH(3)OSO radicals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Yu-Fang; Kong, Lin-Jun; Lee, Yuan-Pern

Irradiation at 239 {+-} 20 nm of a p-H{sub 2} matrix containing methoxysulfinyl chloride, CH{sub 3}OS(O)Cl, at 3.2 K with filtered light from a medium-pressure mercury lamp produced infrared (IR) absorption lines at 3028.4 (attributable to {nu}{sub 1}, CH{sub 2} antisymmetric stretching), 2999.5 ({nu}{sub 2}, CH{sub 3} antisymmetric stretching), 2950.4 ({nu}{sub 3}, CH{sub 3} symmetric stretching), 1465.2 ({nu}{sub 4}, CH{sub 2} scissoring), 1452.0 ({nu}{sub 5}, CH{sub 3} deformation), 1417.8 ({nu}{sub 6}, CH{sub 3} umbrella), 1165.2 ({nu}{sub 7}, CH{sub 3} wagging), 1152.1 ({nu}{sub 8}, S=O stretching mixed with CH{sub 3} rocking), 1147.8 ({nu}{sub 9}, S=O stretching mixed with CH{sub 3} wagging),more » 989.7 ({nu}{sub 10}, C-O stretching), and 714.5 cm{sup -1} ({nu}{sub 11}, S-O stretching) modes of syn-CH{sub 3}OSO. When CD{sub 3}OS(O)Cl in a p-H{sub 2} matrix was used, lines at 2275.9 ({nu}{sub 1}), 2251.9 ({nu}{sub 2}), 2083.3 ({nu}{sub 3}), 1070.3 ({nu}{sub 4}), 1056.0 ({nu}{sub 5}), 1085.5 ({nu}{sub 6}), 1159.7 ({nu}{sub 7}), 920.1 ({nu}{sub 8}), 889.0 ({nu}{sub 9}), 976.9 ({nu}{sub 10}), and 688.9 ({nu}{sub 11}) cm{sup -1} appeared and are assigned to syn-CD{sub 3}OSO; the mode numbers correspond to those used for syn-CH{sub 3}OSO. The assignments are based on the photolytic behavior and a comparison of observed vibrational wavenumbers, infrared intensities, and deuterium isotopic shifts with those predicted with the B3P86/aug-cc-pVTZ method. Our results extend the previously reported four transient IR absorption bands of gaseous syn-CH{sub 3}OSO near 2991, 2956, 1152, and 994 cm{sup -1} to 11 lines, including those associated with C-O, O-S, and S=O stretching modes. Vibrational wavenumbers of syn-CD{sub 3}OSO are new. These results demonstrate the advantage of a diminished cage effect of solid p-H{sub 2} such that the Cl atom, produced via UV photodissociation of CH{sub 3}OS(O)Cl in situ, might escape from the original cage to yield isolated CH{sub 3}OSO radicals.« less

The guided-mode resonance biosensor: principles, technology, and implementation

NASA Astrophysics Data System (ADS)

Magnusson, Robert; Lee, Kyu J.; Hemmati, Hafez; Ko, Yeong Hwan; Wenner, Brett R.; Allen, Jeffery W.; Allen, Monica S.; Gimlin, Susanne; Weidanz, Debra Wawro

2018-02-01

The guided-mode resonance (GMR) sensor operates with quasi-guided modes induced in periodic films. The resonance is enabled by 1D or 2D nanopatterns that are expeditiously fabricated. Optical sensors are needed in many fields including medical diagnostics, chemical analyses, and environmental monitoring. Inducing resonance in multiple modes enables extraction of complete bioreaction information including the biolayer thickness, biolayer refractive index, and any change in the refractive index in the background buffer solution. Thus, we refer to this version of the GMR sensor as the complete biosensor. We address the fundamentals, state of technological development, and implementation of this basic sensor modality.

Complete measurement of spatiotemporally complex multi-spatial-mode ultrashort pulses from multimode optical fibers using delay-scanned wavelength-multiplexed holography.

PubMed

Zhu, Ping; Jafari, Rana; Jones, Travis; Trebino, Rick

2017-10-02

We introduce a simple delay-scanned complete spatiotemporal intensity-and-phase measurement technique based on wavelength-multiplexed holography to characterize long, complex pulses in space and time. We demonstrate it using pulses emerging from multi-mode fiber. This technique extends the temporal range and spectral resolution of the single-frame STRIPED FISH technique without using an otherwise-required expensive ultranarrow-bandpass filter. With this technique, we measured the complete intensity and phase of up to ten fiber modes from a multi-mode fiber (normalized frequency V ≈10) over a ~3ps time range. Spatiotemporal complexities such as intermodal delay, modal dispersion, and material dispersion were also intuitively displayed by the retrieved results. Agreement between the reconstructed color movies and the monitored time-averaged spatial profiles confirms the validity to this delay-scanned STRIPED FISH method.

Simulation of realistic retinoscopic measurement

NASA Astrophysics Data System (ADS)

Tan, Bo; Chen, Ying-Ling; Baker, K.; Lewis, J. W.; Swartz, T.; Jiang, Y.; Wang, M.

2007-03-01

Realistic simulation of ophthalmic measurements on normal and diseased eyes is presented. We use clinical data of ametropic and keratoconus patients to construct anatomically accurate three-dimensional eye models and simulate the measurement of a streak retinoscope with all the optical elements. The results show the clinical observations including the anomalous motion in high myopia and the scissors reflex in keratoconus. The demonstrated technique can be applied to other ophthalmic instruments and to other and more extensively abnormal eye conditions. It provides promising features for medical training and for evaluating and developing ocular instruments.

Primary Mouse Myoblast Purification using Magnetic Cell Separation.

PubMed

Sincennes, Marie Claude; Wang, Yu Xin; Rudnicki, Michael A

2017-01-01

Primary myoblasts can be isolated from mouse muscle cell extracts and cultured in vitro. Muscle cells are usually dissociated manually by mincing with razor blades or scissors in a collagenase/dispase solution. Primary myoblasts are then gradually enriched by pre-plating on collagen-coated plates, based on the observation that mouse fibroblasts attach quickly to collagen-coated plates, and are less adherent. Here, we describe an automated muscle dissociation protocol. We also propose an alternative to pre-plating using magnetic bead separation of primary myoblasts, which improve myoblast purity by minimizing fibroblast contamination.

Bounded rationality leads to equilibrium of public goods games.

PubMed

Xu, Zhaojin; Wang, Zhen; Zhang, Lianzhong

2009-12-01

In this work, we introduce a degree of rationality to the public goods games in which players can determine whether or not to participate, and with it a new mechanism has been established. Existence of the bounded rationality would lead to a new equilibrium which differs from the Nash equilibrium and qualitatively explains the fundamental role of loners' payoff for maintaining cooperation. Meanwhile, it is shown how the potential strategy influences the players' decision. Finally, we explicitly demonstrate a rock-scissors-paper dynamics which is a consequence of this model.

Bounded rationality leads to equilibrium of public goods games

NASA Astrophysics Data System (ADS)

Xu, Zhaojin; Wang, Zhen; Zhang, Lianzhong

2009-12-01

In this work, we introduce a degree of rationality to the public goods games in which players can determine whether or not to participate, and with it a new mechanism has been established. Existence of the bounded rationality would lead to a new equilibrium which differs from the Nash equilibrium and qualitatively explains the fundamental role of loners’ payoff for maintaining cooperation. Meanwhile, it is shown how the potential strategy influences the players’ decision. Finally, we explicitly demonstrate a rock-scissors-paper dynamics which is a consequence of this model.

Network structures between strategies in iterated prisoners' dilemma games

NASA Astrophysics Data System (ADS)

Kim, Young Jin; Roh, Myungkyoon; Son, Seung-Woo

2014-02-01

We use replicator dynamics to study an iterated prisoners' dilemma game with memory. In this study, we investigate the characteristics of all 32 possible strategies with a single-step memory by observing the results when each strategy encounters another one. Based on these results, we define similarity measures between the 32 strategies and perform a network analysis of the relationship between the strategies by constructing a strategies network. Interestingly, we find that a win-lose circulation, like rock-paper-scissors, exists between strategies and that the circulation results from one unusual strategy.

Re-examining the effects of verbal instructional type on early stage motor learning.

PubMed

Bobrownicki, Ray; MacPherson, Alan C; Coleman, Simon G S; Collins, Dave; Sproule, John

2015-12-01

The present study investigated the differential effects of analogy and explicit instructions on early stage motor learning and movement in a modified high jump task. Participants were randomly assigned to one of three experimental conditions: analogy, explicit light (reduced informational load), or traditional explicit (large informational load). During the two-day learning phase, participants learned a novel high jump technique based on the 'scissors' style using the instructions for their respective conditions. For the single-day testing phase, participants completed both a retention test and task-relevant pressure test, the latter of which featured a rising high-jump-bar pressure manipulation. Although analogy learners demonstrated slightly more efficient technique and reported fewer technical rules on average, the differences between the conditions were not statistically significant. There were, however, significant differences in joint variability with respect to instructional type, as variability was lowest for the analogy condition during both the learning and testing phases, and as a function of block, as joint variability decreased for all conditions during the learning phase. Findings suggest that reducing the informational volume of explicit instructions may mitigate the deleterious effects on performance previously associated with explicit learning in the literature. Copyright © 2015 Elsevier B.V. All rights reserved.

Resorbable Self-Locking Implant for Lung Lobectomy Through Video-Assisted Thoracoscopic Surgery: First Live Animal Application.

PubMed

Guedes, Rogério Luizari; Höglund, Odd Viking; Brum, Juliana Sperotto; Borg, Niklas; Dornbusch, Peterson Triches

2018-04-01

The aim of this pilot test was to test a new self-locking resorbable implant for hilum occlusion during a video-assisted thoracoscopic lung lobectomy in a surviving pig model. Once the thoracic cavity was assessed and structures identified, the right middle lobe and its respective hilum were exposed. The implant was introduced with a semiclosed loop through a working channel and positioned around the pulmonary lobe. Occlusion was performed with a conventional Crile forceps and a laparoscopic Kelly forceps. Lobe section was done with laparoscopic Metzenbaum scissors and tissue removal through the dorsal access. No signs of pneumothorax or bleeding were observed during a 60-day follow-up. Necropsy findings showed minimal pleuritis in caudal access and in the lobar stump. A granulomatous formation was found around a dense, amorphous material, which was identified as remains of a small part of the implant. Histopathological findings showed signs of a chronic healing process without other alterations. The resorbable implant LigaTie appears to exhibit similar handling and application characteristics during surgery as nonsurgical tie wraps. The resorbable implant avoids the uncontrolled substances not suitable for implants of conventional ties. The results of this pilot test suggested the resorbable implant's mechanical properties provided effective tissue support to complete the healing of the pulmonary hilum.

Design of a linear projector for use with the normal modes of the GLAS 4th order GCM

NASA Technical Reports Server (NTRS)

Bloom, S. C.

1984-01-01

The design of a linear projector for use with the normal modes of a model of atmospheric circulation is discussed. A central element in any normal mode initialization scheme is the process by which a set of data fields - winds, temperatures or geopotentials, and surface pressures - are expressed ("projected') in terms of the coefficients of a model's normal modes. This process is completely analogous to the Fourier decomposition of a single field (indeed a FFT applied in the zonal direction is a part of the process). Complete separability in all three spatial dimensions is assumed. The basis functions for the modal expansion are given. An important feature of the normal modes is their coupling of the structures of different fields, thus a coefficient in a normal mode expansion would contain both mass and momentum information.

Multimode marine engine room simulation system based on field bus technology

NASA Astrophysics Data System (ADS)

Zheng, Huayao; Deng, Linlin; Guo, Yi

2003-09-01

Developing multi mode MER (Marine Engine Room) Labs is the main work in Marine Simulation Center, which is the key lab of Communication Ministry of China. It includes FPP (Fixed Pitch Propeller) and CPP (Controllable Pitch Propeller) mode MER simulation systems, integrated electrical propulsion mode MER simulation system, physical mode MER lab, etc. FPP mode simulation system, which was oriented to large container ship, had been completed since 1999, and got second level of Shanghai Municipal Science and Technical Progress award. This paper mainly introduces the recent development and achievements of Marine Simulation Center. Based on the Lon Works field bus, the structure characteristics and control strategies of completely distributed intelligent control network are discussed. The experiment mode of multi-nodes field bus detection and control system is described. Besides, intelligent fault diagnosis technology about some mechatronics integration control systems explored is also involved.

Meiosis completion and various sperm responses lead to unisexual and sexual reproduction modes in one clone of polyploid Carassius gibelio.

PubMed

Zhang, Jun; Sun, Min; Zhou, Li; Li, Zhi; Liu, Zhen; Li, Xi-Yin; Liu, Xiao-Li; Liu, Wei; Gui, Jian-Fang

2015-06-04

Unisexual polyploid vertebrates are commonly known to reproduce by gynogenesis, parthenogenesis, or hybridogenesis. One clone of polyploid Carassius gibelio has been revealed to possess multiple modes of unisexual gynogenesis and sexual reproduction, but the cytological and developmental mechanisms have remained unknown. In this study, normal meiosis completion was firstly confirmed by spindle co-localization of β-tubulin and Spindlin. Moreover, three types of various nuclear events and development behaviors were revealed by DAPI staining and BrdU-incorporated immunofluorescence detection during the first mitosis in the fertilized eggs by three kinds of different sperms. They include normal sexual reproduction in response to sperm from the same clone male, typical unisexual gynogenesis in response to sperm from the male of another species Cyprinus carpio, and an unusual hybrid-similar development mode in response to sperm from another different clone male. Based on these findings, we have discussed cytological and developmental mechanisms on multiple reproduction modes in the polyploid fish, and highlighted evolutionary significance of meiosis completion and evolutionary consequences of reproduction mode diversity in polyploid vertebrates.

Meiosis completion and various sperm responses lead to unisexual and sexual reproduction modes in one clone of polyploid Carassius gibelio

PubMed Central

Zhang, Jun; Sun, Min; Zhou, Li; Li, Zhi; Liu, Zhen; Li, Xi-Yin; Liu, Xiao-Li; Liu, Wei; Gui, Jian-Fang

2015-01-01

Unisexual polyploid vertebrates are commonly known to reproduce by gynogenesis, parthenogenesis, or hybridogenesis. One clone of polyploid Carassius gibelio has been revealed to possess multiple modes of unisexual gynogenesis and sexual reproduction, but the cytological and developmental mechanisms have remained unknown. In this study, normal meiosis completion was firstly confirmed by spindle co-localization of β-tubulin and Spindlin. Moreover, three types of various nuclear events and development behaviors were revealed by DAPI staining and BrdU-incorporated immunofluorescence detection during the first mitosis in the fertilized eggs by three kinds of different sperms. They include normal sexual reproduction in response to sperm from the same clone male, typical unisexual gynogenesis in response to sperm from the male of another species Cyprinus carpio, and an unusual hybrid-similar development mode in response to sperm from another different clone male. Based on these findings, we have discussed cytological and developmental mechanisms on multiple reproduction modes in the polyploid fish, and highlighted evolutionary significance of meiosis completion and evolutionary consequences of reproduction mode diversity in polyploid vertebrates. PMID:26042995

Adaptation from Paper-Pencil to Web-Based Administration of a Parent-Completed Developmental Questionnaire for Young Children

ERIC Educational Resources Information Center

Yovanoff, Paul; Squires, Jane; McManus, Suzanne

2013-01-01

Adapting traditional paper-pencil instruments to computer-based environments has received considerable attention from the research community due to the possible administration mode effects on obtained measures. When differences due to mode of completion (i.e., paper-pencil, computer-based) are present, threats to measurement validity are posed. In…

OVERVIEW: USING MODE OF ACTION AND LIFE STAGE INFORMATION TO EVALUATE THE HUMAN RELEVANCE OF ANIMAL TOXICITY DATA.

EPA Science Inventory

A manuscript summarizes a workshop aimed at developing a framework to determine the relevancy of animal modes-of-action for extrapolation to humans. A complete mode of action human relevance analysis - as distinct from mode of action (MOA) analysis alone - depends on robust info...

BamA β16C strand and periplasmic turns are critical for outer membrane protein insertion and assembly.

PubMed

Gu, Yinghong; Zeng, Yi; Wang, Zhongshan; Dong, Changjiang

2017-11-21

Outer membrane (OM) β-barrel proteins play important roles in importing nutrients, exporting wastes and conducting signals in Gram-negative bacteria, mitochondria and chloroplasts. The outer membrane proteins (OMPs) are inserted and assembled into the OM by OMP85 family proteins. In Escherichia coli , the β-barrel assembly machinery (BAM) contains four lipoproteins such as BamB, BamC, BamD and BamE, and one OMP BamA, forming a 'top hat'-like structure. Structural and functional studies of the E. coli BAM machinery have revealed that the rotation of periplasmic ring may trigger the barrel β1C-β6C scissor-like movement that promote the unfolded OMP insertion without using ATP. Here, we report the BamA C-terminal barrel structure of Salmonella enterica Typhimurium str. LT2 and functional assays, which reveal that the BamA's C-terminal residue Trp, the β16C strand of the barrel and the periplasmic turns are critical for the functionality of BamA. These findings indicate that the unique β16C strand and the periplasmic turns of BamA are important for the outer membrane insertion and assembly. The periplasmic turns might mediate the rotation of the periplasmic ring to the scissor-like movement of BamA β1C-β6C, triggering the OMP insertion. These results are important for understanding the OMP insertion in Gram-negative bacteria, as well as in mitochondria and chloroplasts. © 2017 The Author(s). Published by Portland Press Limited on behalf of the Biochemical Society.

Portable source identification device

NASA Astrophysics Data System (ADS)

Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

2005-05-01

U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nation"s ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet (7.3 m) in the air, allowing a wide vertical scanning range.

Wrist loading patterns during pommel horse exercises.

PubMed

Markolf, K L; Shapiro, M S; Mandelbaum, B R; Teurlings, L

1990-01-01

Gymnastics is a sport which involves substantial periods of upper extremity support as well as frequent impacts to the wrist. Not surprisingly, wrist pain is a common finding in gymnasts. Of all events, the pommel horse is the most painful. In order to study the forces of wrist impact, a standard pommel horse was instrumented with a specially designed load cell to record the resultant force of the hand on the pommel during a series of basic skills performed by a group of seventeen elite male gymnasts. The highest mean peak forces were recorded during the front scissors and flair exercises (1.5 BW) with peaks of up to 2.0 BW for some gymnasts. The mean peak force for hip circles at the center or end of the horse was 1.1 BW. The mean overall loading rate (initial contact to first loading peak) ranged from 5.2 BWs-1 (hip circles) to 10.6 BW s-1 (flairs). However, many recordings displayed localized initial loading spikes which occurred during 'hard' landings on the pommel. When front scissors were performed in an aggressive manner, the initial loading spikes averaged 1.0 BW in magnitude (maximum 1.8 BW) with an average rise time of 8.2 ms; calculated localized loading rates averaged 129 BW s-1 (maximum 219 BW s-1). These loading parameters are comparable to those encountered at heel strike during running. These impact forces and loading rates are remarkably high for an upper extremity joint not normally exposed to weight-bearing loads, and may contribute to the pathogenesis of wrist injuries in gymnastics.

Beating Heart Validation of Safety and Efficacy of a Percutaneous Pericardiotomy Tool.

PubMed

Killu, Ammar M; Naksuk, Niyada; Desimone, Christopher V; Gaba, Prakriti; Suddendorf, Scott; Powers, Joanne; Ladewig, Dorothy J; Lerman, Lilach O; Borlaug, Barry A; Asirvatham, Samuel J

2017-03-01

Epicardial procedures frequently require pericardial manipulation. We aimed to develop a nonsurgical percutaneous pericardial modification tool that may (1) facilitate epicardial-based procedures by enabling adhesiolysis or (2) attenuate the myocardial constraining effect of the pericardium. Three novel devices were developed to enable pericardiotomy, all of which can be deployed in over-the-wire fashion following percutaneous epicardial access. The grasper permits us to seize the pericardial membrane providing leverage for incision. The scissors enables anterograde cutting maneuvers. The reverse-slitter allows retrograde incisions; in addition, this device has a deflectable tip that increases the potential cutting area. We optimized these tools for safety by including electrodes to test for phrenic nerve stimulation as well as myocardial stimulation to determine directionality of the cutting devices. The base of the scissors and reverse-slitter are also blunt ensuring that the cutting element is always away from the myocardium. Following 5 nonbeating heart bench test experiments for prototype development, 11 animal (9 canine, 2 swine) studies were performed. Of these 2 were proof-of-concept open chest studies; the remaining 9 were entirely closed-chest, percutaneous procedures allowing for remodification of the prototypes. The tools successfully permitted incision of the pericardium in all studies. Hemodynamic measurements were assessed postincision and showed no compromise of systolic function. No coronary artery or phrenic nerve damage was seen in any study. Percutaneous pericardiotomy is feasible and appears to be safe. It may provide leverage in epicardial-based procedures and offer treatment options in disease processes characterized by pericardial restraint. © 2016 Wiley Periodicals, Inc.

Integrated Turbine-Based Combined Cycle Dynamic Simulation Model

NASA Technical Reports Server (NTRS)

Haid, Daniel A.; Gamble, Eric J.

2011-01-01

A Turbine-Based Combined Cycle (TBCC) dynamic simulation model has been developed to demonstrate all modes of operation, including mode transition, for a turbine-based combined cycle propulsion system. The High Mach Transient Engine Cycle Code (HiTECC) is a highly integrated tool comprised of modules for modeling each of the TBCC systems whose interactions and controllability affect the TBCC propulsion system thrust and operability during its modes of operation. By structuring the simulation modeling tools around the major TBCC functional modes of operation (Dry Turbojet, Afterburning Turbojet, Transition, and Dual Mode Scramjet) the TBCC mode transition and all necessary intermediate events over its entire mission may be developed, modeled, and validated. The reported work details the use of the completed model to simulate a TBCC propulsion system as it accelerates from Mach 2.5, through mode transition, to Mach 7. The completion of this model and its subsequent use to simulate TBCC mode transition significantly extends the state-of-the-art for all TBCC modes of operation by providing a numerical simulation of the systems, interactions, and transient responses affecting the ability of the propulsion system to transition from turbine-based to ramjet/scramjet-based propulsion while maintaining constant thrust.

Feedback and Control of Linear and Nonlinear Global MHD Modes in Rotating Plasmas

NASA Astrophysics Data System (ADS)

Finn, J. M.; Chacon, L.

2002-11-01

We present studies of feedback applied to resistive wall modes in the presence of plasma rotation. The main tool used is a Newton-Krylov nonlinear reduced resistive MHD code with completely implicit time stepping[1]. The effects of proportional and derivative gain and toroidal phase shift are investigated. In addition to studying the complete stabilization of the resistive wall mode, we present results on controlling the amplitude of nonlinear modes locked to the wall but propagating slowly; we also show results on reducing the hysteresis in the locking-unlocking bifurcation diagram. [1] L. Chacon, D. A. Knoll and J. M. Finn, "An implicit, nonlinear reduced resistive MHD solver", J. Comp. Phys. v. 178, pp 15-36 (2002).

DENSITY-DEPENDENT FLOW IN ONE-DIMENSIONAL VARIABLY-SATURATED MEDIA

EPA Science Inventory

A one-dimensional finite element is developed to simulate density-dependent flow of saltwater in variably saturated media. The flow and solute equations were solved in a coupled mode (iterative), in a partially coupled mode (non-iterative), and in a completely decoupled mode. P...

In quantum direct communication an undetectable eavesdropper can always tell Ψ from Φ Bell states in the message mode

NASA Astrophysics Data System (ADS)

Pavičić, Mladen

2013-04-01

We show that in any quantum direct communication protocol that is based on Ψ and Φ Bell states, an eavesdropper can always tell Ψ from Φ states without altering the transmission in any way in the message mode. This renders all protocols that make use of only one Ψ state and one Φ state completely insecure in the message mode. All four-Bell-state protocols require a revision and this might be of importance for new implementations of entanglement-based cryptographic protocols. The detection rate of an eavesdropper is 25% per control transmission, i.e., a half of the rate in the two-state (ping-pong) protocol. An eavesdropper can detect control probes with certainty in the standard control transmission without a photon in the Alice-to-Bob's travel mode and with near certainty in a transmission with a fake photon in the travel mode. Resending of measured control photons via the travel mode would make an eavesdropper completely invisible.

Effectiveness of a Radiographic Anatomy Software Application for Enhancing Learning of Veterinary Radiographic Anatomy.

PubMed

Reiter, Rachel; Viehdorfer, Matt; Hescock, Kimmy; Clark, Terri; Nemanic, Sarah

The goal of this study was to determine the effectiveness of an interactive radiology software application that we developed to enhance learning of normal canine radiographic anatomy. All first-year veterinary medical students were eligible to participate in this subject pre-test-post-test experimental design. When presented with the software application, all students had completed two terms of gross anatomy in which the complete anatomy of the dog had been taught using a combination of lectures and laboratory dissections, including radiographic examples. The software application was divided into four body regions: front limb, hind limb, skull/spine, and thorax/abdomen, each with a learning mode and a quiz mode. Quizzes were composed of 15 questions drawn pseudo-randomly without repeat from all structures within a region (median 206 structures). Students were initially given the software application with only the quiz mode activated. After completing four quizzes, one for each body region, students were given access to the software application with both learning mode and quiz mode activated. Students were instructed to spend 30 minutes using the learning mode to study the radiographic anatomy of each region and to retake each quiz. Quiz scores after using the learning mode were significantly higher for each body region (p<.001), with a large effect size for all four regions (Cohen's d=0.83-1.56). These results suggest that this radiographic anatomy software application is an effective tool for students to use to learn normal radiographic anatomy.

Skylab

NASA Image and Video Library

1972-05-01

Technicians at NASA’s Marshall Space Flight Center check the wiring on a mechanical test article of the Apollo Telescope Mount (ATM) solar array. Four such arrays were joined in a cross to provide electric power for the ATM in Earth orbit. The deployment mechanism for extending the wing to the fully open position had just been tested when this photograph was taken. The array was suspended from beams riding on air bearings to closely simulate the weightless conditions under which it would be deployed in space. The wings are folded against the sides of the ATM for launch and are deployed by a scissors mechanism in Earth’s orbit.

Coupled replicator equations for the dynamics of learning in multiagent systems

NASA Astrophysics Data System (ADS)

Sato, Yuzuru; Crutchfield, James P.

2003-01-01

Starting with a group of reinforcement-learning agents we derive coupled replicator equations that describe the dynamics of collective learning in multiagent systems. We show that, although agents model their environment in a self-interested way without sharing knowledge, a game dynamics emerges naturally through environment-mediated interactions. An application to rock-scissors-paper game interactions shows that the collective learning dynamics exhibits a diversity of competitive and cooperative behaviors. These include quasiperiodicity, stable limit cycles, intermittency, and deterministic chaos—behaviors that should be expected in heterogeneous multiagent systems described by the general replicator equations we derive.

A&E nursing in Iraq.

PubMed

Thompson, Lieutenant Sarah

2004-01-01

I am an A&E nurse. I work 12-hour shifts on a rotation of 12 hours on, 24 hours off, seven days a week. It takes me five minutes to walk to the A&E department where I work. As well as the scissors and pen torch you would expect a nurse to carry, I take body armour, goggles and a helmet to work. With outdoor temperatures regularly reaching more than 50°C, water is essential for any journey, however short. As I am sure you can tell, I do not work in an ordinary A&E department.

Commander Mattingly prepares meal on middeck

NASA Image and Video Library

1982-07-04

STS004-28-312 (27 June-4 July 1982) --- Astronaut Thomas K. Mattingly II, STS-4 crew commander, prepares a meal in the middeck area of space shuttle Columbia. He uses scissors to open a drink container. Various packages of food and meal accessories are attached to locker doors. At far left edge of the frame is the tall payload called continuous flow electrophoresis experiment (CFES) system-designed to separate biological materials according to their surface electrical charges as they pass through an electrical field. Astronaut Henry W. Hartsfield Jr. exposed this frame with a 35mm camera. Photo credit: NASA

Why Do Computer Viruses Survive In The Internet?

NASA Astrophysics Data System (ADS)

Ifti, Margarita; Neumann, Paul

2010-01-01

We use the three-species cyclic competition model (Rock-Paper-Scissors), described by reactions A+B→2B, B+C→2C, C+A→2A, for emulating a computer network with e-mail viruses. Different topologies of the network bring about different dynamics of the epidemics. When the parameters of the network are varied, it is observed that very high clustering coefficients are necessary for a pandemics to happen. The differences between the networks of computer users, e-mail networks, and social networks, as well as their role in determining the nature of epidemics are also discussed.

Adjustable-Viewing-Angle Endoscopic Tool for Skull Base and Brain Surgery

NASA Technical Reports Server (NTRS)

Bae, Youngsam; Liao, Anna; Manohara, Harish; Shahinian, Hrayr

2008-01-01

The term Multi-Angle and Rear Viewing Endoscopic tooL (MARVEL) denotes an auxiliary endoscope, now undergoing development, that a surgeon would use in conjunction with a conventional endoscope to obtain additional perspective. The role of the MARVEL in endoscopic brain surgery would be similar to the role of a mouth mirror in dentistry. Such a tool is potentially useful for in-situ planetary geology applications for the close-up imaging of unexposed rock surfaces in cracks or those not in the direct line of sight. A conventional endoscope provides mostly a frontal view that is, a view along its longitudinal axis and, hence, along a straight line extending from an opening through which it is inserted. The MARVEL could be inserted through the same opening as that of the conventional endoscope, but could be adjusted to provide a view from almost any desired angle. The MARVEL camera image would be displayed, on the same monitor as that of the conventional endoscopic image, as an inset within the conventional endoscopic image. For example, while viewing a tumor from the front in the conventional endoscopic image, the surgeon could simultaneously view the tumor from the side or the rear in the MARVEL image, and could thereby gain additional visual cues that would aid in precise three-dimensional positioning of surgical tools to excise the tumor. Indeed, a side or rear view through the MARVEL could be essential in a case in which the object of surgical interest was not visible from the front. The conceptual design of the MARVEL exploits the surgeon s familiarity with endoscopic surgical tools. The MARVEL would include a miniature electronic camera and miniature radio transmitter mounted on the tip of a surgical tool derived from an endo-scissor (see figure). The inclusion of the radio transmitter would eliminate the need for wires, which could interfere with manipulation of this and other surgical tools. The handgrip of the tool would be connected to a linkage similar to that of an endo-scissor, but the linkage would be configured to enable adjustment of the camera angle instead of actuation of a scissor blade. It is envisioned that thicknesses of the tool shaft and the camera would be less than 4 mm, so that the camera-tipped tool could be swiftly inserted and withdrawn through a dime-size opening. Electronic cameras having dimensions of the order of millimeters are already commercially available, but their designs are not optimized for use in endoscopic brain surgery. The variety of potential endoscopic, thoracoscopic, and laparoscopic applications can be expected to increase as further development of electronic cameras yields further miniaturization and improvements in imaging performance.

Investigation of the Structure, Optical and Electrical Properties of Lithium Perchlorate Doped Polyaniline Composite: Aloe Vera Used as a Bio-Plasticizer

NASA Astrophysics Data System (ADS)

Yesappa, L.; Niranjana, M.; Ashokkumar, S. P.; Vijeth, H.; Sharanappa, Chapi; Raghu, S.; Devendrappa, H.

2017-12-01

Bio-plasticizer based polyaniline (PANI)/lithium perchlorate (LiClO4) composites were synthesized by the facile in situ method. The composites were characterized using the Fourier transform infrared spectroscopy (FT-IR) to identify the chemical interactions. A band appeared at 1502 cm-1 due to the presence of the -H2CO- group and CH2 scissor mode vibration for the PAL15% composite. This considerable change in the morphology of LiClO4 homogeneous dispersion in a PANI matrix was investigated by scanning electron microscopy (SEM). The UV-Visible absorption (UV-Vis) showed 300-400 nm attributed to the π- π* transition and exhibited a red shift from 535 nm to 617 nm in the visible region, indicating a decrease in band gap. The variations in dielectric constant with the addition of lithium perchlorate (LiClO4) at different temperatures and in the frequency range of 20 Hz-1 MHz were assessed through impedance analysis. The temperature dependent electrical conductivity increased with increasing temperature as well as dopant concentration. High conductivity of 1.41 × 10-3 S/cm corresponding to activation energy of 0.02 eV and 2.95 eV optical band gap for 15 wt.% of LiClO4 concentration was observed. The cyclic voltammetry measurement revealed a typical rectangular shape of the integral area, suggesting that the composite has strong electrochemical strength and is a possible candidate for electrochemical super capacitor and solar cell applications.

A Practical English Teaching Mode of Vocational Education: Induction-Interaction Learning Community

ERIC Educational Resources Information Center

Zhang, Yonglong

2008-01-01

Secondary Vocational School Students are characterized by the awkward fact "congenital malnutrition" and "acquired development deficiency", continuously adopting of the current teaching methods and modes of General Education is completely impossible. In this report, a new English Teaching Mode of Induction-Interaction Learning…

General Mode Scanning Probe Microscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Somnath, Suhas; Jesse, Stephen

A critical part of SPM measurements is the information transfer from the probe-sample junction to the measurement system. Current information transfer methods heavily compress the information-rich data stream by averaging the data over a time interval, or via heterodyne detection approaches such as lock-in amplifiers and phase-locked loops. As a consequence, highly valuable information at the sub-microsecond time scales or information from frequencies outside the measurement band is lost. We have developed a fundamentally new approach called General Mode (G-mode), where we can capture the complete information stream from the detectors in the microscope. The availability of the complete informationmore » allows the microscope operator to analyze the data via information-theory analysis or comprehensive physical models. Furthermore, the complete data stream enables advanced data-driven filtering algorithms, multi-resolution imaging, ultrafast spectroscropic imaging, spatial mapping of multidimensional variability in material properties, etc. Though we applied this approach to scanning probe microscopy, the general philosophy of G-mode can be applied to many other modes of microscopy. G-mode data is captured by completely custom software written in LabVIEW and Matlab. The software generates the waveforms to electrically, thermally, or mechanically excite the SPM probe. It handles real-time communications with the microscope software for operations such as moving the SPM probe position and also controls other instrumentation hardware. The software also controls multiple variants of high-speed data acquisition cards to excite the SPM probe with the excitation waveform and simultaneously measure multiple channels of information from the microscope detectors at sampling rates of 1-100 MHz. The software also saves the raw data to the computer and allows the microscope operator to visualize processed or filtered data during the experiment. The software performs all these features while offering a user-friendly interface.« less

An Exploration and Analysis of the Modes of Rural School Consolidation in China

ERIC Educational Resources Information Center

Hongyong, Jia; Fenfen, Zhou

2013-01-01

Based on research involving 177 primary and secondary schools spread over thirty-eight counties in six provinces (including one autonomous region), this article explores and analyzes four modes used in rural school consolidation in China. These four modes are: complete amalgamation, annexation, crossover, and centralization-decentralization.

Induction graphitizing furnace acceptance test report

NASA Technical Reports Server (NTRS)

1972-01-01

The induction furnace was designed to provide the controlled temperature and environment required for the post-cure, carbonization and graphitization processes for the fabrication of a fibrous graphite NERVA nozzle extension. The acceptance testing required six tests and a total operating time of 298 hrs. Low temperature mode operations, 120 to 850 C, were completed in one test run. High temperature mode operations, 120 to 2750 C, were completed during five tests.

Self-directed learning in gross human anatomy: assessment outcomes and student perceptions.

PubMed

Smythe, Gayle; Hughes, Diane

2008-01-01

Speech pathology students enrolled in a lecture-based gross human anatomy program completed two out of nine topics in self-directed mode. Student performance in quizzes was compared for the two modes, and the students completed questionnaires on their perceptions of the self-directed mode of delivery. Students performed as well in the first self-directed topic as they did in lecture-based material, but performance declined significantly on the second self-directed topic. Correlations showed that students who performed well in lecture-based topics also performed well on self-directed topics. The major issues that arose in the student questionnaires were primarily related to the amount of content in the topics and the length of time required for completion. We conclude that there is a strong need for appropriate design of distance education materials to reflect student perceptions of length, content, and time investment, and more importantly that there is a need to ensure extensive communication and support of students studying in distance education/self-directed modes for the first time.

Condensation model for the ESBWR passive condensers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Revankar, S. T.; Zhou, W.; Wolf, B.

2012-07-01

In the General Electric's Economic simplified boiling water reactor (GE-ESBWR) the passive containment cooling system (PCCS) plays a major role in containment pressure control in case of an loss of coolant accident. The PCCS condenser must be able to remove sufficient energy from the reactor containment to prevent containment from exceeding its design pressure following a design basis accident. There are three PCCS condensation modes depending on the containment pressurization due to coolant discharge; complete condensation, cyclic venting and flow through mode. The present work reviews the models and presents model predictive capability along with comparison with existing data frommore » separate effects test. The condensation models in thermal hydraulics code RELAP5 are also assessed to examine its application to various flow modes of condensation. The default model in the code predicts complete condensation well, and basically is Nusselt solution. The UCB model predicts through flow well. None of condensation model in RELAP5 predict complete condensation, cyclic venting, and through flow condensation consistently. New condensation correlations are given that accurately predict all three modes of PCCS condensation. (authors)« less

Distributed measurement of polarization mode coupling in fiber ring based on P-OTDR complete polarization state detection.

PubMed

Huang, Zejia; Wu, Chongqing; Wang, Zhi; Wang, Jian; Liu, Lanlan

2018-02-19

Using a quaternion method, the polarization mode-coupling coefficient can be derived from three components of the Stokes vectors at three adjacent points along a fiber. A complete polarization optical time-domain reflectometry scheme for polarization mode coupling distributed measurement in polarization-maintaining fiber ring is proposed based on the above theoretical derivations. By comparing the measurement results of two opposite incident directions and two orthogonal polarization axes of polarization-maintaining fiber rings with different lengths, the feasibility and repeatability of the measurement scheme are verified experimentally with a positioning spatial resolution of 1 meter.

A Triassic-Jurassic westward scissor-like subduction history of the Mudanjiang Ocean and amalgamation of the Jiamusi Block in NE China: Constraints from whole-rock geochemistry and zircon U-Pb and Lu-Hf isotopes of the Lesser Xing'an-Zhangguangcai Range granitoids

NASA Astrophysics Data System (ADS)

Ge, Mao-Hui; Zhang, Jin-Jiang; Li, Long; Liu, Kai

2018-03-01

NE China recorded the key tectonic evolution history of the Eurasian Plate from the Paleozoic-Mesozoic collisional formation of the Central Asian Orogenic Belt to the Mesozoic subduction of the Paleo-Pacific Ocean. To better understand this tectonic transition, it is crucial to constrain the time and pattern of the initial subduction of the Paleo-Pacific Ocean. Recently, some researchers proposed that the Mudanjiang Ocean existed between the Songnen and Jiamusi blocks was part of the Paleo-Pacific Ocean. Here, through geochemical and geochronological studies on the widespread granitoids in the Lesser Xing'an-Zhangguangcai Range in the eastern Songnen Block, we verify that these magmatic rocks show volcanic arc affinity with increased mantle contribution from east to the west of the range, likely related to a flattening subduction of the Mudanjiang Ocean. In addition, a universal westward younging trend for over 70 Myr can be observed for the granitoids throughout the Lesser Xing'an-Zhangguangcai Range, indicating a long-lasting subduction of the Mudanjiang Ocean. More interestingly, the oldest ages of the granitoids in the east display a northward younging trend from 275 Ma to 218 Ma, suggesting that the subduction of the Mudanjiang Ocean had been initiated at latest by 275 Ma in the south and then progressively expanded to the north. Based on these observations, we proposed a new tectonic evolution model for the Mudanjiang Ocean, i.e., a Triassic-Jurassic westward scissor-like subduction and closure, to contribute to the understanding of the early subduction of the Paleo-Pacific Ocean.

How to Become a Mentalist: Reading Decisions from a Competitor’s Pupil Can Be Achieved without Training but Requires Instruction

PubMed Central

Naber, Marnix; Stoll, Josef; Einhäuser, Wolfgang; Carter, Olivia

2013-01-01

Pupil dilation is implicated as a marker of decision-making as well as of cognitive and emotional processes. Here we tested whether individuals can exploit another’s pupil to their advantage. We first recorded the eyes of 3 "opponents", while they were playing a modified version of the "rock-paper-scissors" childhood game. The recorded videos served as stimuli to a second set of participants. These "players" played rock-paper-scissors against the pre-recorded opponents in a variety of conditions. When players just observed the opponents’ eyes without specific instruction their probability of winning was at chance. When informed that the time of maximum pupil dilation was indicative of the opponents’ choice, however, players raised their winning probability significantly above chance. When just watching the reconstructed area of the pupil against a gray background, players achieved similar performance, showing that players indeed exploited the pupil, rather than other facial cues. Since maximum pupil dilation was correct about the opponents’ decision only in 60% of trials (chance 33%), we finally tested whether increasing this validity to 100% would allow spontaneous learning. Indeed, when players were given no information, but the pupil was informative about the opponent’s response in all trials, players performed significantly above chance on average and half (5/10) reached significance at an individual level. Together these results suggest that people can in principle use the pupil to detect cognitive decisions in another individual, but that most people have neither explicit knowledge of the pupil’s utility nor have they learnt to use it despite a lifetime of exposure. PMID:23991185

KENNEDY SPACE CENTER, FLA. - Center Director and former astronaut Roy D. Bridges, Jr., (holding scissors) cuts the ribbon at a ceremony officially opening the U.S. Astronaut Hall of Fame as part of the Kennedy Space Center Visitor Complex. Invited guests and dignitaries look on, such as former astronauts Edgar D. Mitchell on Bridges' left and James Lovell on his right. The ceremony was held in conjunction with the induction of four Space Shuttle astronauts into the Hall of Fame including Daniel Brandenstein, Robert "Hoot" Gibson, Story Musgrave, and Sally Ride. Conceived by six of the Mercury Program astronauts, the U.S. Astronaut Hall of Fame opened in 1990 to provide a place where space travelers could be remembered for their participation and accomplishments in the U.S. space program. The four new inductees join 48 previously honored astronauts from the ranks of the Gemini, Apollo, Skylab, Apollo-Soyuz, and Space Shuttle programs.

NASA Image and Video Library

2003-06-20

KENNEDY SPACE CENTER, FLA. - Center Director and former astronaut Roy D. Bridges, Jr., (holding scissors) cuts the ribbon at a ceremony officially opening the U.S. Astronaut Hall of Fame as part of the Kennedy Space Center Visitor Complex. Invited guests and dignitaries look on, such as former astronauts Edgar D. Mitchell on Bridges' left and James Lovell on his right. The ceremony was held in conjunction with the induction of four Space Shuttle astronauts into the Hall of Fame including Daniel Brandenstein, Robert "Hoot" Gibson, Story Musgrave, and Sally Ride. Conceived by six of the Mercury Program astronauts, the U.S. Astronaut Hall of Fame opened in 1990 to provide a place where space travelers could be remembered for their participation and accomplishments in the U.S. space program. The four new inductees join 48 previously honored astronauts from the ranks of the Gemini, Apollo, Skylab, Apollo-Soyuz, and Space Shuttle programs.

Novel and safer endoscopic cholecystectomy using only a flexible endoscope via single port

PubMed Central

Mori, Hirohito; Kobayashi, Nobuya; Kobara, Hideki; Nishiyama, Noriko; Fujihara, Shintaro; Chiyo, Taiga; Ayaki, Maki; Nagase, Takashi; Masaki, Tsutomu

2016-01-01

AIM: To apply the laparoscopic and endoscopic cooperative surgery concept, we investigated whether endoscopic cholecystectomy could be performed more safely and rapidly via only 1 port or not. METHODS: Two dogs (11 and 13-mo-old female Beagle) were used in this study. Only 1 blunt port was created, and a flexible endoscope with a tip attachment was inserted between the fundus of gallbladder and liver. After local injection of saline to the gallbladder bed, resection of the gallbladder bed from the liver was performed. After complete resection of the gallbladder bed, the gallbladder was pulled up to resect its neck using the Ring-shaped thread technique. The neck of the gallbladder was cut using scissor forceps. Resected gallbladder was retrieved using endoscopic net forceps via a port. RESULTS: The operation times from general anesthetizing with sevoflurane to finishing the closure of the blunt port site were about 50 min and 60 min respectively. The resection times of gallbladder bed were about 15 min and 13 min respectively without liver injury and bleeding at all. Feed were given just after next day of operation, and they had a good appetite. Two dogs are in good health now and no complications for 1 mo after endoscopic cholecystectomy using only a flexible endoscope via one port. CONCLUSION: We are sure of great feasibility of endoscopic cholecystectomy via single port for human. PMID:27053847

Endoscopic submucosal dissection of early colorectal neoplasms with a monopolar scissor-type knife: short- to long-term outcomes.

PubMed

Kuwai, Toshio; Yamaguchi, Toshiki; Imagawa, Hiroki; Sumida, Yuki; Takasago, Takeshi; Miyasako, Yuki; Nishimura, Tomoyuki; Iio, Sumio; Yamaguchi, Atsushi; Kouno, Hirotaka; Kohno, Hiroshi; Ishaq, Sauid

2017-09-01

Background and study aims  Endoscopic submucosal dissection (ESD) for colorectal neoplasms remains challenging because of technical issues imposed by the complex anatomical features of the large intestine. We evaluated the feasibility, and the short- and long-term clinical outcomes of ESD for early colorectal neoplasms performed using the Stag-beetle Knife Jr. (SB Knife Jr.) Patients and methods  We retrospectively assessed 228 patients who underwent ESD for 247 colorectal lesions with the SB Knife Jr. Clinicopathological characteristics of the neoplasms, complications, and various short- and long-term outcomes were evaluated. Results  Mean tumor size was 34.3 mm and median procedure time was 76 minutes. The SB Knife Jr. achieved 98.4 % en bloc resection, 93.9 % complete resection, and 85.4 % curative resection. No perforations occurred during the procedure, and a delayed bleeding rate of 2.4 % was observed. Long-term outcomes were favorable with no distant recurrence, 1.1 % local recurrence, a 5-year overall survival rate of 94.1 % and 5-year tumor-specific survival rate of 98.6 % in patients with cancer. Conclusions  ESD using the SB Knife Jr. is technically efficient and safe in treating early colorectal neoplasms and is associated with favorable short- and long-term outcomes. © Georg Thieme Verlag KG Stuttgart · New York.

Development of a Two-Wheel Contingency Mode for the MAP Spacecraft

NASA Technical Reports Server (NTRS)

Starin, Scott R.; ODonnell, James R., Jr.; Bauer, Frank H. (Technical Monitor)

2002-01-01

In the event of a failure of one of MAP's three reaction wheel assemblies (RWAs), it is not possible to achieve three-axis, full-state attitude control using the remaining two wheels. Hence, two of the attitude control algorithms implemented on the MAP spacecraft will no longer be usable in their current forms: Inertial Mode, used for slewing to and holding inertial attitudes, and Observing Mode, which implements the nominal dual-spin science mode. This paper describes the effort to create a complete strategy for using software algorithms to cope with a RWA failure. The discussion of the design process will be divided into three main subtopics: performing orbit maneuvers to reach and maintain an orbit about the second Earth-Sun libration point in the event of a RWA failure, completing the mission using a momentum-bias two-wheel science mode, and developing a new thruster-based mode for adjusting the inertially fixed momentum bias. In this summary, the philosophies used in designing these changes is shown; the full paper will supplement these with algorithm descriptions and testing results.

Finite element structural model of a large, thin, completely free, flat plate. [for large space structures

NASA Technical Reports Server (NTRS)

Joshi, S. M.; Groom, N. J.

1980-01-01

A finite element structural model of a 30.48 m x 30.48 m x 2.54 mm completely free aluminum plate is described and modal frequencies and mode shape data for the first 44 modes are presented. An explanation of the procedure for using the data is also presented. The model should prove useful for the investigation of controller design approaches for large flexible space structures.

Comparison of self-administered survey questionnaire responses collected using mobile apps versus other methods.

PubMed

Marcano Belisario, José S; Jamsek, Jan; Huckvale, Kit; O'Donoghue, John; Morrison, Cecily P; Car, Josip

2015-07-27

Self-administered survey questionnaires are an important data collection tool in clinical practice, public health research and epidemiology. They are ideal for achieving a wide geographic coverage of the target population, dealing with sensitive topics and are less resource-intensive than other data collection methods. These survey questionnaires can be delivered electronically, which can maximise the scalability and speed of data collection while reducing cost. In recent years, the use of apps running on consumer smart devices (i.e., smartphones and tablets) for this purpose has received considerable attention. However, variation in the mode of delivering a survey questionnaire could affect the quality of the responses collected. To assess the impact that smartphone and tablet apps as a delivery mode have on the quality of survey questionnaire responses compared to any other alternative delivery mode: paper, laptop computer, tablet computer (manufactured before 2007), short message service (SMS) and plastic objects. We searched MEDLINE, EMBASE, PsycINFO, IEEEXplore, Web of Science, CABI: CAB Abstracts, Current Contents Connect, ACM Digital, ERIC, Sociological Abstracts, Health Management Information Consortium, the Campbell Library and CENTRAL. We also searched registers of current and ongoing clinical trials such as ClinicalTrials.gov and the World Health Organization (WHO) International Clinical Trials Registry Platform. We also searched the grey literature in OpenGrey, Mobile Active and ProQuest Dissertation & Theses. Lastly, we searched Google Scholar and the reference lists of included studies and relevant systematic reviews. We performed all searches up to 12 and 13 April 2015. We included parallel randomised controlled trials (RCTs), crossover trials and paired repeated measures studies that compared the electronic delivery of self-administered survey questionnaires via a smartphone or tablet app with any other delivery mode. We included data obtained from participants completing health-related self-administered survey questionnaire, both validated and non-validated. We also included data offered by both healthy volunteers and by those with any clinical diagnosis. We included studies that reported any of the following outcomes: data equivalence; data accuracy; data completeness; response rates; differences in the time taken to complete a survey questionnaire; differences in respondent's adherence to the original sampling protocol; and acceptability to respondents of the delivery mode. We included studies that were published in 2007 or after, as devices that became available during this time are compatible with the mobile operating system (OS) framework that focuses on apps. Two review authors independently extracted data from the included studies using a standardised form created for this systematic review in REDCap. They then compared their forms to reach consensus. Through an initial systematic mapping on the included studies, we identified two settings in which survey completion took place: controlled and uncontrolled. These settings differed in terms of (i) the location where surveys were completed, (ii) the frequency and intensity of sampling protocols, and (iii) the level of control over potential confounders (e.g., type of technology, level of help offered to respondents). We conducted a narrative synthesis of the evidence because a meta-analysis was not appropriate due to high levels of clinical and methodological diversity. We reported our findings for each outcome according to the setting in which the studies were conducted. We included 14 studies (15 records) with a total of 2275 participants; although we included only 2272 participants in the final analyses as there were missing data for three participants from one included study.Regarding data equivalence, in both controlled and uncontrolled settings, the included studies found no significant differences in the mean overall scores between apps and other delivery modes, and that all correlation coefficients exceeded the recommended thresholds for data equivalence. Concerning the time taken to complete a survey questionnaire in a controlled setting, one study found that an app was faster than paper, whereas the other study did not find a significant difference between the two delivery modes. In an uncontrolled setting, one study found that an app was faster than SMS. Data completeness and adherence to sampling protocols were only reported in uncontrolled settings. Regarding the former, an app was found to result in more complete records than paper, and in significantly more data entries than an SMS-based survey questionnaire. Regarding adherence to the sampling protocol, apps may be better than paper but no different from SMS. We identified multiple definitions of acceptability to respondents, with inconclusive results: preference; ease of use; willingness to use a delivery mode; satisfaction; effectiveness of the system informativeness; perceived time taken to complete the survey questionnaire; perceived benefit of a delivery mode; perceived usefulness of a delivery mode; perceived ability to complete a survey questionnaire; maximum length of time that participants would be willing to use a delivery mode; and reactivity to the delivery mode and its successful integration into respondents' daily routine. Finally, regardless of the study setting, none of the included studies reported data accuracy or response rates. Our results, based on a narrative synthesis of the evidence, suggest that apps might not affect data equivalence as long as the intended clinical application of the survey questionnaire, its intended frequency of administration and the setting in which it was validated remain unchanged. There were no data on data accuracy or response rates, and findings on the time taken to complete a self-administered survey questionnaire were contradictory. Furthermore, although apps might improve data completeness, there is not enough evidence to assess their impact on adherence to sampling protocols. None of the included studies assessed how elements of user interaction design, survey questionnaire design and intervention design might influence mode effects. Those conducting research in public health and epidemiology should not assume that mode effects relevant to other delivery modes apply to apps running on consumer smart devices. Those conducting methodological research might wish to explore the issues highlighted by this systematic review.

Development and applications of two computational procedures for determining the vibration modes of structural systems. [aircraft structures - aerospaceplanes

NASA Technical Reports Server (NTRS)

Kvaternik, R. G.

1975-01-01

Two computational procedures for analyzing complex structural systems for their natural modes and frequencies of vibration are presented. Both procedures are based on a substructures methodology and both employ the finite-element stiffness method to model the constituent substructures. The first procedure is a direct method based on solving the eigenvalue problem associated with a finite-element representation of the complete structure. The second procedure is a component-mode synthesis scheme in which the vibration modes of the complete structure are synthesized from modes of substructures into which the structure is divided. The analytical basis of the methods contains a combination of features which enhance the generality of the procedures. The computational procedures exhibit a unique utilitarian character with respect to the versatility, computational convenience, and ease of computer implementation. The computational procedures were implemented in two special-purpose computer programs. The results of the application of these programs to several structural configurations are shown and comparisons are made with experiment.

Initial nonresponse and survey response mode biases in survey research.

PubMed

Chi, Donald L; Chen, Chao Ying

2015-01-01

We evaluated survey response factors (particularly initial nonresponse and survey mode) that may be associated with bias in survey research. We examined prevention-related beliefs and outcomes for initial mail survey responders (n=209), follow-up mail survey responders (n=78), and follow-up telephone survey responders (n=74). The Pearson chi-square test and analysis of variance identified beliefs and behavioral outcomes associated with survey response mode. Follow-up options to the initial mail survey improved response rates (22.0-38.0 percent). Initial mail survey responders more strongly believed topical fluoride protects teeth from cavities than others (P=0.04). A significantly larger proportion of parents completing a follow-up telephone survey (30.8 percent) refused topical fluoride for their child than those completing mail surveys (10.3-10.4 percent) (P<0.0001). Multiple mode surveys with follow-up improve response rates. Initial nonresponse and survey response mode may be associated with biases in survey research. © 2015 American Association of Public Health Dentistry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Podoskin, A. A., E-mail: podoskin@mail.ioffe.ru; Shashkin, I. S.; Slipchenko, S. O.

A model describing the operation of a completely optical cell, based on the competition of lasing of Fabry-Perot cavity modes and the high-Q closed mode in high-power semiconductor lasers is proposed. Based on rate equations, the conditions of lasing switching between Fabry-Perot modes for ground and excited lasing levels and the closed mode are considered in the case of increasing internal optical loss under conditions of high current pump levels. The optical-cell operation conditions in the mode of a high-power laser radiation switch (reversible mode-structure switching) and in the mode of a memory cell with bistable irreversible lasing switching betweenmore » mode structures with various Q-factors are considered.« less

Prism-coupled light emission from tunnel junctions

NASA Technical Reports Server (NTRS)

Ushioda, S.; Rutledge, J. E.; Pierce, R. M.

1985-01-01

Completely p-polarized light emission has been observed from smooth Al-AlO(x)-Au tunnel junctions placed on a prism coupler. The angle and polarization dependence demonstrate unambiguously that the emitted light is radiated by the fast-mode surface plasmon polariton. The emission spectra suggest that the dominant process for the excitation of the fast mode is through conversion of the slow mode to the fast mode mediated by residual roughness on the junction surface.

Delta IV Heavy Centaur Stage Mate to Booster - Parker Solar Prob

NASA Image and Video Library

2018-03-02

A United Launch Alliance (ULA) worker on a scissor lift watches as the second stage of a ULA Delta IV Heavy is mated to the common booster core inside the Horizontal Integration Facility near Space Launch Complex 37 at Cape Canaveral Air Force Station in Florida. The Delta IV Heavy will launch NASA's upcoming Parker Solar Probe mission in July 2018. The mission will perform the closest-ever observations of a star when it travels through the Sun's atmosphere, called the corona. The probe will rely on measurements and imaging to revolutionize our understanding of the corona and the Sun-Earth connection.

Self-assisted complete hyperentangled Bell state analysis using quantum-dot spins in optical microcavities

NASA Astrophysics Data System (ADS)

Zeng, Zhi

2018-05-01

An efficient scheme for the discrimination of 16 hyperentangled Bell states of a two-photon system that is entangled in both polarization and spatial-mode degrees of freedom is presented in this paper. Using the interaction between the photons and quantum-dot spins in cavities, the spatial-mode Bell states can be distinguished completely and nondestructively in the first step. Subsequently, the preserved spatial-mode entanglement is utilized as an auxiliary to analyze the polarization Bell states. Compared with a previous scheme (Ren et al 2012 Opt. Express 20 24664-77), our scheme reduces the requirement for nonlinear interaction substantially by utilizing the intrinsic degrees of freedom in hyperentanglement.

Mode evolution in polarization maintain few mode fibers and applications in mode-division-multiplexing systems

NASA Astrophysics Data System (ADS)

Li, Yan; Zeng, Xinglin; Mo, Qi; Li, Wei; Liu, Zhijian; Wu, Jian

2016-10-01

In few-mode polarization-maintaining-fiber (FM-PMF), the effective-index splitting exists not only between orthogonally polarization state but also between degenerated modes within a high-order mode group. Hence besides the polarization state evolution, the mode patterns in each LP set are need to be analyzed. In this letter, the completed firstorder mode (LP11 mode) evolution in PM-FMF is analyzed and represented by analogous Jones vector and Poincarésphere respectively. Furthermore, with Jones matrix analysis, the modal dynamics in FM-PMFs is conveniently analyzed. The conclusions are used to propose a PM-FMF based LP11 mode rotator and an PM-FMF based OAM generator. Both simulation and experiments are conducted to investigate performance of the two devices.

Ultra-high-Q three-dimensional photonic crystal nano-resonators.

PubMed

Tang, Lingling; Yoshie, Tomoyuki

2007-12-10

Two nano-resonator modes are designed in a woodpile three-dimensional photonic crystal by the modulation of unit cell size along a low-loss optical waveguide. One is a dipole mode with 2.88 cubic half-wavelengths mode volume. The other is a quadrupole mode with 8.3 cubic half-wavelengths mode volume. Light is three-dimensionally confined by a complete photonic band gap so that, in the analyzed range, the quality factor exponentially increases as the increase in the number of unit cells used for confinement of light.

The effect of mode and context on survey results: Analysis of data from the Health Survey for England 2006 and the Boost Survey for London

PubMed Central

2010-01-01

Background Health-related data at local level could be provided by supplementing national health surveys with local boosts. Self-completion surveys are less costly than interviews, enabling larger samples to be achieved for a given cost. However, even when the same questions are asked with the same wording, responses to survey questions may vary by mode of data collection. These measurement differences need to be investigated further. Methods The Health Survey for England in London ('Core') and a London Boost survey ('Boost') used identical sampling strategies but different modes of data collection. Some data were collected by face-to-face interview in the Core and by self-completion in the Boost; other data were collected by self-completion questionnaire in both, but the context differed. Results were compared by mode of data collection using two approaches. The first examined differences in results that remained after adjusting the samples for differences in response. The second compared results after using propensity score matching to reduce any differences in sample composition. Results There were no significant differences between the two samples for prevalence of some variables including long-term illness, limiting long-term illness, current rates of smoking, whether participants drank alcohol, and how often they usually drank. However, there were a number of differences, some quite large, between some key measures including: general health, GHQ12 score, portions of fruit and vegetables consumed, levels of physical activity, and, to a lesser extent, smoking consumption, the number of alcohol units reported consumed on the heaviest day of drinking in the last week and perceived social support (among women only). Conclusion Survey mode and context can both affect the responses given. The effect is largest for complex question modules but was also seen for identical self-completion questions. Some data collected by interview and self-completion can be safely combined. PMID:20868528

A Comparison of Web and Telephone Responses From a National HIV and AIDS Survey

PubMed Central

Calzavara, Liviana; Allman, Dan; Worthington, Catherine A; Tyndall, Mark; Iveniuk, James

2016-01-01

Background Response differences to survey questions are known to exist for different modes of questionnaire completion. Previous research has shown that response differences by mode are larger for sensitive and complicated questions. However, it is unknown what effect completion mode may have on HIV and AIDS survey research, which addresses particularly sensitive and stigmatized health issues. Objectives We seek to compare responses between self-selected Web and telephone respondents in terms of social desirability and item nonresponse in a national HIV and AIDS survey. Methods A survey of 2085 people in Canada aged 18 years and older was conducted to explore public knowledge, attitudes, and behaviors around HIV and AIDS in May 2011. Participants were recruited using random-digit dialing and could select to be interviewed on the telephone or self-complete through the Internet. For this paper, 15 questions considered to be either sensitive, stigma-related, or less-sensitive in nature were assessed to estimate associations between responses and mode of completion. Multivariate regression analyses were conducted for questions with significant (P≤.05) bivariate differences in responses to adjust for sociodemographic factors. As survey mode was not randomly assigned, we created a propensity score variable and included it in our multivariate models to control for mode selection bias. Results A total of 81% of participants completed the questionnaire through the Internet, and 19% completed by telephone. Telephone respondents were older, reported less education, had lower incomes, and were more likely from the province of Quebec. Overall, 2 of 13 questions assessed for social desirability and 3 of 15 questions assessed for item nonresponse were significantly associated with choice of mode in the multivariate analysis. For social desirability, Web respondents were more likely than telephone respondents to report more than 1 sexual partner in the past year (fully adjusted odds ratio (OR)=3.65, 95% CI 1.80-7.42) and more likely to have donated to charity in the past year (OR=1.63, 95% CI 1.15-2.29). For item nonresponse, Web respondents were more likely than telephone respondents to have a missing or “don’t know” response when asked about: the disease they were most concerned about (OR=3.02, 95% CI 1.67-5.47); if they had ever been tested for HIV (OR=8.04, 95% CI 2.46-26.31); and when rating their level of comfort with shopping at grocery store if the owner was known to have HIV or AIDS (OR=3.11, 95% CI 1.47-6.63). Conclusion Sociodemographic differences existed between Web and telephone respondents, but for 23 of 28 questions considered in our analysis, there were no significant differences in responses by mode. For surveys with very sensitive health content, such as HIV and AIDS, Web administration may be subject to less social desirability bias but may also have greater item nonresponse for certain questions. PMID:27473597

Adaptive variational mode decomposition method for signal processing based on mode characteristic

NASA Astrophysics Data System (ADS)

Lian, Jijian; Liu, Zhuo; Wang, Haijun; Dong, Xiaofeng

2018-07-01

Variational mode decomposition is a completely non-recursive decomposition model, where all the modes are extracted concurrently. However, the model requires a preset mode number, which limits the adaptability of the method since a large deviation in the number of mode set will cause the discard or mixing of the mode. Hence, a method called Adaptive Variational Mode Decomposition (AVMD) was proposed to automatically determine the mode number based on the characteristic of intrinsic mode function. The method was used to analyze the simulation signals and the measured signals in the hydropower plant. Comparisons have also been conducted to evaluate the performance by using VMD, EMD and EWT. It is indicated that the proposed method has strong adaptability and is robust to noise. It can determine the mode number appropriately without modulation even when the signal frequencies are relatively close.

Comparison of telephone with World Wide Web-based responses by parents and teens to a follow-up survey after injury.

PubMed

Rivara, Frederick P; Koepsell, Thomas D; Wang, Jin; Durbin, Dennis; Jaffe, Kenneth M; Vavilala, Monica; Dorsch, Andrea; Roper-Caldbeck, Maria; Houseknecht, Eileen; Temkin, Nancy

2011-06-01

To identify sociodemographic factors associated with completing a follow-up survey about health status on the web versus by telephone, and to examine differences in reported health-related quality of life by method of response. Survey about child health status of 896 parents of children aged 0-17 years treated in a hospital emergency department or admitted for a traumatic brain injury or arm injury, and 227 injured adolescents aged 14-17 years. The main outcomes were characteristics of those who completed a follow-up survey on the web versus by telephone and health-related quality of life by method of response. Email addresses were provided by 76.9 percent of parents and 56.5 percent of adolescents at baseline. The survey was completed on the web by 64.9 percent of parents and 40.2 percent of adolescents through email. Parents with email access who were Blacks, Hispanics, had lower incomes, and those who were not working were less likely to choose the web mode for completing the survey. Unlike adolescents, the amount of time for parents to complete the survey online was significantly shorter than completion by telephone. Differences by survey mode were small but statistically significant in some of the six functional outcome measures examined. Survey mode was associated with several sociodemographic characteristics. Sole use of web surveys could provide biased data. © Health Research and Educational Trust.

Radial retinotomy in the macula.

PubMed

Bovino, J A; Marcus, D F

1984-01-01

Radial retinotomy is an operative procedure usually performed in the peripheral or equatorial retina. To facilitate retinal attachment, the authors used intraocular scissors to perform radial retinotomy in the macula of two patients during vitrectomy surgery. In the first patient, a retinal detachment complicated by periretinal proliferation and macula hole formation was successfully reoperated with the aid of three radial cuts in the retina at the edges of the macular hole. In the second patient, an intraoperative retinal tear in the macula during diabetic vitrectomy was also successfully repaired with the aid of radial retinotomy. In both patients, retinotomy in the macula was required because epiretinal membranes, which could not be easily delaminated, were hindering retinal reattachment.

Self adhesive dressing pouch for the protection of catheters.

PubMed

de la Cruz Martínez, Maria Teresa; Hernández, María José

2002-01-01

This paper is about a new model of dressing, used for the protection of all types of temporary and permanent catheters. Those who developed this dressing realised the practical difficulties during the placement and removal of traditional dressings, used in haemodialysis units. They also realised that it this was unpleasant for the patients, and there was a risk to the catheters when removing the dressings because of the use of scissors and other cutting instruments. This new dressing solves these previously mentioned problems and at the same time contributes to the comfort of the patients. The model has been registered as a standard using model, and therefore it is protected by law and its copyright (Intellectual Property).

Phase Transitions and Volunteering in Spatial Public Goods Games

NASA Astrophysics Data System (ADS)

Szabó, György; Hauert, Christoph

2002-08-01

We present a simple yet effective mechanism promoting cooperation under full anonymity by allowing for voluntary participation in public goods games. This natural extension leads to ``rock-scissors-paper''-type cyclic dominance of the three strategies, cooperate, defect, and loner. In spatial settings with players arranged on a regular lattice, this results in interesting dynamical properties and intriguing spatiotemporal patterns. In particular, variations of the value of the public good leads to transitions between one-, two-, and three-strategy states which either are in the class of directed percolation or show interesting analogies to Ising-type models. Although volunteering is incapable of stabilizing cooperation, it efficiently prevents successful spreading of selfish behavior.

Skylab

NASA Image and Video Library

1972-05-01

This is a close-up photograph of the Orbital Workshop (OWS) trash disposal airlock located on the floor of the lower level of the OWS. It provided a means of passing trash from the pressurized habitable area into the unpressurized waste tank. The crewman opened a valve which brought the airlock to the same pressure as that within the workshop. He then opened the lid, placed the bagged trash inside, closed the lid and locked it. By turning the valve handle, he reduced the pressure within the airlock until it reached the vacuum of the waste tank. The crewman then operated an ejector handle that caused a scissors-type mechanism to push the bagged trash from the airlock into the tank.

Replicator dynamics with turnover of players

NASA Astrophysics Data System (ADS)

Juul, Jeppe; Kianercy, Ardeshir; Bernhardsson, Sebastian; Pigolotti, Simone

2013-08-01

We study adaptive dynamics in games where players abandon the population at a given rate and are replaced by naive players characterized by a prior distribution over the admitted strategies. We demonstrate how such a process leads macroscopically to a variant of the replicator equation, with an additional term accounting for player turnover. We study how Nash equilibria and the dynamics of the system are modified by this additional term for prototypical examples such as the rock-paper-scissors game and different classes of two-action games played between two distinct populations. We conclude by showing how player turnover can account for nontrivial departures from Nash equilibria observed in data from lowest unique bid auctions.

A neuro-collision avoidance strategy for robot manipulators

NASA Technical Reports Server (NTRS)

Onema, Joel P.; Maclaunchlan, Robert A.

1992-01-01

The area of collision avoidance and path planning in robotics has received much attention in the research community. Our study centers on a combination of an artificial neural network paradigm with a motion planning strategy that insures safe motion of the Articulated Two-Link Arm with Scissor Hand System relative to an object. Whenever an obstacle is encountered, the arm attempts to slide along the obstacle surface, thereby avoiding collision by means of the local tangent strategy and its artificial neural network implementation. This combination compensates the inverse kinematics of a robot manipulator. Simulation results indicate that a neuro-collision avoidance strategy can be achieved by means of a learning local tangent method.

Infantile masturbation and paroxysmal disorders.

PubMed

Omran, Mohammadreza Salehi; Ghofrani, Mohammad; Juibary, Ali Ghabeli

2008-02-01

A recurrent paroxysmal presentation in children leads to different diagnoses and among them are neurologic and cardiac etiologies. Infantile masturbation is not a well known entity and cannot be differentiated easily from other disorders. Aim of this study is to elucidate and differentiate this condition from epileptic seizures. We report 3 cases of 10 to 30 mth old girls of infantile masturbation that their symptoms initiated at 2, 3 and 8 mth of age. These present with contraction and extension of lower extremities, scissoring of legs, perspiration, changing face color. In 2 cases body rocking and legs rubbing initiated then there after. Masturbation is one of the paroxysmal non-epileptic conditions of early infancy and is in differential diagnosis of epileptic seizures.

Effects of electron cyclotron current drive on the evolution of double tearing mode

NASA Astrophysics Data System (ADS)

Sun, Guanglan; Dong, Chunying; Duan, Longfang

2015-09-01

The effects of electron cyclotron current drive (ECCD) on the double tearing mode (DTM) in slab geometry are investigated by using two-dimensional compressible magnetohydrodynamics equations. It is found that, mainly, the double tearing mode is suppressed by the emergence of the secondary island, due to the deposition of driven current on the X-point of magnetic island at one rational surface, which forms a new non-complete symmetric magnetic topology structure (defined as a non-complete symmetric structure, NSS). The effects of driven current with different parameters (magnitude, initial time of deposition, duration time, and location of deposition) on the evolution of DTM are analyzed elaborately. The optimal magnitude or optimal deposition duration of driven current is the one which makes the duration of NSS the longest, which depends on the mutual effect between ECCD and the background plasma. Moreover, driven current introduced at the early Sweet-Parker phase has the best suppression effect; and the optimal moment also exists, depending on the duration of the NSS. Finally, the effects varied by the driven current disposition location are studied. It is verified that the favorable location of driven current is the X-point which is completely different from the result of single tearing mode.

Unitarily localizable entanglement of Gaussian states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Serafini, Alessio; Adesso, Gerardo; Illuminati, Fabrizio

2005-03-01

We consider generic (mxn)-mode bipartitions of continuous-variable systems, and study the associated bisymmetric multimode Gaussian states. They are defined as (m+n)-mode Gaussian states invariant under local mode permutations on the m-mode and n-mode subsystems. We prove that such states are equivalent, under local unitary transformations, to the tensor product of a two-mode state and of m+n-2 uncorrelated single-mode states. The entanglement between the m-mode and the n-mode blocks can then be completely concentrated on a single pair of modes by means of local unitary operations alone. This result allows us to prove that the PPT (positivity of the partial transpose)more » condition is necessary and sufficient for the separability of (m+n)-mode bisymmetric Gaussian states. We determine exactly their negativity and identify a subset of bisymmetric states whose multimode entanglement of formation can be computed analytically. We consider explicit examples of pure and mixed bisymmetric states and study their entanglement scaling with the number of modes.« less

Derivation of equations of motion for multi-blade rotors employing coupled modes and including high twist capability

NASA Technical Reports Server (NTRS)

Sopher, R.

1975-01-01

The equations of motion are derived for a multiblade rotor. A high twist capability and coupled flatwise-edgewise assumed normal modes are employed instead of uncoupled flatwise - edgewise assumed normal models. The torsion mode is uncoupled. Support system models, consisting of complete helicopters in free flight, or grounded flexible supports, arbitrary rotor-induced inflow, and arbitrary vertical gust models are also used.

Papercraft temporal bone in the first step of anatomy education.

PubMed

Hiraumi, Harukazu; Sato, Hiroaki; Ito, Juichi

2017-06-01

(1) To compare temporal bone anatomy comprehension taught to speech therapy students with or without a papercraft model. (2) To explore the effect of papercraft simulation on the understanding of surgical approaches in first-year residents. (1) One-hundred and ten speech therapy students were divided into three classes. The first class was taught with a lecture only. The students in the second class were given a lecture and a papercraft modeling task without instruction. The third class modeled a papercraft with instruction after the lecture. The students were tested on their understanding of temporal bone anatomy. (2) A questionnaire on the understanding of surgical approaches was completed by 10 residents before and after the papercraft modeling. The papercraft models were cut with scissors to simulate surgical approaches. (1) The average scores were 4.4/8 for the first class, 4.3/8 for the second class, and 6.3/8 for the third class. The third class had significantly better results than the other classes (p<0.01, Kruskal-Wallis test). (2) The average scores before and after the papercraft modeling and cutting were 2.6/7 and 4.9/7, respectively. The numerical rating scale score significantly improved (p<0.01, Wilcoxon signed-rank test). The instruction of the anatomy using a papercraft temporal bone model is effective in the first step of learning temporal bone anatomy and surgical approaches. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Is the learning curve endless? One surgeon's experience with robotic prostatectomy

NASA Astrophysics Data System (ADS)

Patel, Vipul; Thaly, Rahul; Shah, Ketul

2007-02-01

Introduction: After performing 1,000 robotic prostatectomies we reflected back on our experience to determine what defined the learning curve and the essential elements that were the keys to surmounting it. Method: We retrospectively assessed our experience to attempt to define the learning curve(s), key elements of the procedure, technical refinements and changes in technology that facilitated our progress. Result: The initial learning curve to achieve basic competence and the ability to smoothly perform the procedure in less than 4 hours with acceptable outcomes was approximately 25 cases. A second learning curve was present between 75-100 cases as we approached more complicated patients. At 200 cases we were comfortably able to complete the procedure routinely in less than 2.5 hours with no specific step of the procedure hindering our progression. At 500 cases we had the introduction of new instrumentation (4th arm, biopolar Maryland, monopolar scissors) that changed our approach to the bladder neck and neurovascular bundle dissection. The most challenging part of the procedure was the bladder neck dissection. Conclusion: There is no single parameter that can be used to assess or define the learning curve. We used a combination of factors to make our subjective definition this included: operative time, smoothness of technical progression during the case along with clinical outcomes. The further our case experience progressed the more we expected of our outcomes, thus we continually modified our technique and hence embarked upon yet a new learning curve.

Laparoscopic partial nephrectomy for renal tumor: Nagoya experience.

PubMed

Yoshikawa, Yoko; Ono, Yoshinari; Hattori, Ryohei; Gotoh, Momokazu; Yoshino, Yasushi; Katsuno, Satoshi; Katoh, Masashi; Ohshima, Shinichi

2004-08-01

To clarify the indication for a vascular clamp during laparoscopic partial nephrectomy, the clinical results of 17 patients who underwent the procedure for small renal tumors were reviewed. Seventeen patients with renal tumors were enrolled in our laparoscopic partial nephrectomy program between October 1999 and November 2003. During laparoscopy, a vascular clamp was used to remove the tumor mass and suture the incised renal parenchyma and urinary collecting system in 8 patients who had less-than-1-cm-thick renal parenchyma between the mass and the renal sinus or calices. In the remaining 9 patients, who had 1-cm-or-more-thick renal parenchyma between the mass and sinus or calices, renal bleeding was controlled using ultrasonic scissors, gauze tampon, argon beam coagulator, and fibrin glue. Sixteen patients were successfully treated with laparoscopy; one required conversion to open surgery because of uncontrollable bleeding. The average operative time was 4.5 hours, and average estimated bleeding volume was 301 mL. In the 8 patients requiring vascular clamping by forceps, the average ischemic time was 25 minutes. In all patients, the tumor mass was completely removed with negative surgical margins, and renal function was preserved. Three patients had prolonged urinary leakage for a mean of 21 days. Laparoscopic partial nephrectomy offers many advantages, including surgery that is both nephron sparing and minimally invasive. A vascular clamp was indicated for patients with less-than-1-cm-thick renal parenchyma between the tumor mass and renal sinus or calices.

Audit of operative hysteroscopies among infertile women in a resource-poor setting.

PubMed

Ugboaja, Joseph O; Oguejiofor, Charlotte B; Ogelle, Onyecherelam M

2018-04-01

To evaluate the operative hysteroscopy procedures performed among infertile women at two hospitals in Nigeria. A prospective case series was undertaken among all patients with infertility who underwent operative hysteroscopy between November 2015 and April 2017. The outcome measures included the frequency and type of operative hysteroscopy and the reproductive outcome. The series included 159 women, 70.4% (n=112) of whom had abnormal findings at hysteroscopy. A total of 162 operative hysteroscopic procedures were performed; the most common procedures were adhesiolysis (76 [46.9%]), polypectomy (28 [17.3%]), and septum resection/incision (17 [10.5%]). The instruments used were mainly scissors (65 [40.1%]) and a resectoscope (52 [32.1%]). Complete removal of the lesions was achieved in 86.4% (n=140) of the procedures and a normal cavity in 87.0% (n=141). The complication rate was 6.8% (n=11); the most common complication was minor hemorrhage (5 [3.1%]). The main challenges included poor distention (10 [6.2%]) and poor vision (8 [4.9%]). Menstrual normalization was achieved in 64 (40.3%) of the patients, the cumulative pregnancy rate was 19.5% (n=31), and the live birth rate was 3.8% (n=6). Operative hysteroscopy was feasible and safe in the present resource-poor region. There is a need to build capacity for the performance of hysteroscopy to facilitate the management of infertility in the region. © 2017 International Federation of Gynecology and Obstetrics.

Wave theory of turbulence in compressible media

NASA Technical Reports Server (NTRS)

Kentzer, C. P.

1975-01-01

An acoustical theory of turbulence was developed to aid in the study of the generation of sound in turbulent flows. The statistical framework adopted is a quantum-like wave dynamical formulation in terms of complex distribution functions. This formulation results in nonlinear diffusion-type transport equations for the probability densities of the five modes of wave propagation: two vorticity modes, one entropy mode, and two acoustic modes. This system of nonlinear equations is closed and complete. The technique of analysis was chosen such that direct applications to practical problems can be obtained with relative ease.

Dark plasmonic breathing modes in silver nanodisks.

PubMed

Schmidt, Franz-Philipp; Ditlbacher, Harald; Hohenester, Ulrich; Hohenau, Andreas; Hofer, Ferdinand; Krenn, Joachim R

2012-11-14

We map the complete plasmonic spectrum of silver nanodisks by electron energy loss spectroscopy and show that the mode which couples strongest to the electron beam has radial symmetry with no net dipole moment. Therefore, this mode does not couple to light and has escaped from observation in optical experiments. This radial breathing mode has the character of an extended two-dimensional surface plasmon with a wavenumber determined by the circular disk confinement. Its strong near fields can impact the hybridization in coupled plasmonic nanoparticles as well as couplings with nearby quantum emitters.

On-chip optical mode conversion based on dynamic grating in photonic-phononic hybrid waveguide

PubMed Central

Chen, Guodong; Zhang, Ruiwen; Sun, Junqiang

2015-01-01

We present a scheme for reversible and tunable on-chip optical mode conversion based on dynamic grating in a hybrid photonic-phononic waveguide. The dynamic grating is built up through the acousto-optic effect and the theoretical model of the optical mode conversion is developed by considering the geometrical deformation and refractive index change. Three kinds of mode conversions are able to be realized using the same hybrid waveguide structure in a large bandwidth by only changing the launched acoustic frequency. The complete mode conversion can be achieved by choosing a proper acoustic power under a given waveguide length. PMID:25996236

Personality, Internet Experience, and E-Communication Preference

ERIC Educational Resources Information Center

Johnson, Genevieve Marie; Johnson, Julia Ann

2006-01-01

Ninety-three college students discussed four case studies using two CMC modes--synchronous and asynchronous. Students completed a questionnaire that assessed: 1) perceptions and preferences with respect to CMC mode, 2) the personality characteristic of introversion-extroversion, and 3) previous experience using the Internet. Approximately 40% of…

Intrinsic hybrid modes in a corrugated conical horn

NASA Astrophysics Data System (ADS)

Dendane, A.; Arnold, J. M.

1988-08-01

Computational requirements for the generation of intrinsic modes in a nonseparable waveguide geometry requiring a full vector field description with anistropic impedance boundaries were derived. Good agreement is shown between computed and measured radiation patterns in copolar and crosspolar configurations. This agreement establishes that the intrinsic mode correctly accounts for the local normal mode conversion which takes place along the horn in a conventional mode coupling scheme, at least for cone semiangles up to 15 deg. The advantage of the intrinsic mode formulation over the conventional mode-coupling theory is that, to construct a single intrinsic mode throughout the horn, only one local normal mode field is required at each cross section, whereas mode conversion from the HE11 mode would require all the HE1n modes to be known at each cross section. The intrinsic mode accounts also for fields which would appear as backward modes in coupled-mode theory. A complete coupled-mode theory solution requires the inversion of a large matrix at each cross section, whereas the intrinsic mode can be constructed explicitly using a simple Fourier-like integral; the perturbation solution of Dragone (1977) is difficult to make rigorous.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covrig, Silviu Doru

The G0 experiment in Hall C at Jefferson Lab measures the parity-violating asymmetry in elastic electron scattering off hydrogen and quasielastic electron scattering off deuterium in the Q 2 range from 0.1 to 1 (GeV) 2 in both forward and backward running modes by using a longitudinally polarized electron beam on unpolarized liquid targets. By measuring three independent asymmetries, one in forward running mode off liquid hydrogen and two in backward running mode, one off liquid hydrogen and one off liquid deuterium, the experiment aims to perform for the first time a complete separation and mapping of the strange vectormore » form factors of the nucleon (G_M s, G_E s) and the isovector axial form factor (G_A e(T=1)) in three Q 2 bins over the Q 2 range from 0.1 to 1 (GeV/c) 2. To complete the physics program in both forward and backward modes it will take about five years. To accomplish the forward running mode program some 100 C of data are needed. This thesis is based on 9 C of physics data taken during the first chekout of the G 0 apparatus during October 2002 - January 2003.« less

The Effect of Inhomogeneities on High-Frequency, Low-1 p-Modes: DIFOS Experiment on CORONAS-I

NASA Technical Reports Server (NTRS)

Kalkofen, Wolfgang

1998-01-01

The investigation of the effects of inhomogeneities of the acoustic modes of the global solar oscillation spectrum has two parts, the first dealing with the prediction of wave fluxes in magnetic flux tubes due to the excitation of longitudinal (i.e. pressure) modes, and the second part, concerning the effects of radiation damping on the p-modes themselves. Part 1 of this work, in collaboration with S.S. Hasan (Indian Institute of Astro- physics, Bangalore), is complete and has resulted in a publication titled Excitation of Longitudinal Modes in Solar Magnetic Flux Tubes, By S.S. Hasan & WK. It is in press in the ASP conference series, containing the proceedings of the Cool Stars conference of 1997, R.A. Donahue and J.A. Bookbinder, editors; publication is expected in 1998. Part 2, in collaboration with Y. Zhugzhda (Izmiran, Moscow) and J. Staude (Sonnenobservatorium Einsteinturm, Potsdam) is in progress and is expected to result in a paper in the forthcoming Boston conference on Helio- and Asteroseismology in June, 1998. A fuller accounting of the work done under the grant will be given when the work started with funding from the grant is complete.

Student Performance in an Introductory Business Statistics Course: Does Delivery Mode Matter?

ERIC Educational Resources Information Center

Haughton, Jonathan; Kelly, Alison

2015-01-01

Approximately 600 undergraduates completed an introductory business statistics course in 2013 in one of two learning environments at Suffolk University, a mid-sized private university in Boston, Massachusetts. The comparison group completed the course in a traditional classroom-based environment, whereas the treatment group completed the course in…

Rock-paper-scissors played within competing domains in predator-prey games

NASA Astrophysics Data System (ADS)

Labavić, Darka; Meyer-Ortmanns, Hildegard

2016-11-01

We consider (N, r) games of prey and predation with N species and r  <  N prey and predators, acting in a cyclic way. Further basic reactions include reproduction, decay and diffusion over a one- or two-dimensional regular grid, without a hard constraint on the occupation number per site, so in a ‘bosonic’ implementation. For special combinations of N and r and appropriate parameter choices we observe games within games, that is different coexisting games, depending on the spatial resolution. As a concrete and simplest example we analyze the (6,3) game. Once the players segregate from a random initial distribution, domains emerge, which effectively play a (2,1)-game on the coarse scale of domain diameters, while agents inside the domains play (3,1) (rock-paper-scissors), leading to spiral formation with species chasing each other. The (2,1)-game has a winner in the end, so that the coexistence of domains is transient, while agents inside the remaining domain coexist, until demographic fluctuations lead to extinction of all but one species in the very end. This means that we observe a dynamical generation of multiple space and time scales with emerging re-organization of players upon segregation, starting from a simple set of rules on the smallest scale (that of the grid) and changed rules from the coarser perspective. These observations are based on Gillespie simulations. We discuss the deterministic limit derived from a van Kampen expansion. In this limit we perform a linear stability analysis and numerically integrate the resulting equations. The linear stability analysis predicts the number of forming domains, their composition in terms of species; it explains the instability of interfaces between domains, which drives their extinction; spiral patterns are identified as motion along heteroclinic cycles. The numerical solutions reproduce the observed patterns of the Gillespie simulations including even extinction events, so that the mean-field analysis here is very conclusive, which is due to the specific implementation of rules.

Pliocene-Quaternary tectonic evolution of the Gulf of Gökova, southwest Turkey

NASA Astrophysics Data System (ADS)

Tur, Hüseyin; Yaltırak, Cenk; Elitez, İrem; Sarıkavak, Kerim Tuncer

2015-01-01

Evolution of the east-west-trending Gökova Graben structure is related to the north-south extension of the Aegean segment of the Aegean-Anatolian Microplate. The Pliocene-Quaternary successions surrounding the onland portion of the Gökova Graben as well as coeval successions within the marine portion of the graben are cut by at least three families of faults that strike northwest-southeast, east-west and east-northeast-west-southwest. These orientations are inconsistent with a simple north-south extensional regime. Interpretation of seismic reflection profiles, multibeam bathymetry and GPS vectors indicates that the Gökova Graben developed as a lazy-S-shaped graben in the back-arc setting north of the Hellenic Arc. A counterclockwise rotation of the Aegean segment of the Aegean-Anatolian Microplate is the suggested mechanism for this geometry, as subduction zone rolled back occurred during the Pliocene-Quaternary. The Gulf of Gökova is the youngest of a series of basins that developed within this large back-arc system, including the Nisyros, Karpathos, and Kamilonisi basins, collectively named to as the Gökova-Nisyros-Karpathos Graben. It is proposed that this graben experienced a scissor-like opening initiating from the west during the Pliocene and progressing eastward during the Quaternary. Faults that are seemingly un-correlated onland and in the marine areas become remarkably aligned when the Marmaris-Rhodes Block is progressively rotated by 6° counterclockwise relative to the Muğla Block using a pole position located within the Gulf of Gökova. The scissor-like opening of the westernmost regions of the Gökova Graben likely occurred during the late Pliocene, whereas the central and eastern portions of the graben developed during the early-middle Pleistocene and late Pleistocene-Holocene, respectively. The onset of the opening of the westernmost segment of the Gökova-Nisyros-Karpathos Graben occurred at a time earlier than the late Pliocene.

Robotic-assisted laparoscopic radical nephrectomy using the Da Vinci Si system: how to improve surgeon autonomy. Our step-by-step technique.

PubMed

Davila, Hugo H; Storey, Raul E; Rose, Marc C

2016-09-01

Herein, we describe several steps to improve surgeon autonomy during a Left Robotic-Assisted Laparoscopic Radical Nephrectomy (RALRN), using the Da Vinci Si system. Our kidney cancer program is based on 2 community hospitals. We use the Da Vinci Si system. Access is obtained with the following trocars: Two 8 mm robotic, one 8 mm robotic, bariatric length (arm 3), 15 mm for the assistant and 12 mm for the camera. We use curved monopolar scissors in robotic arm 1, Bipolar Maryland in arm 2, Prograsp Forceps in arm 3, and we alternate throughout the surgery with EndoWrist clip appliers and the vessel sealer. Here, we described three steps and the use of 3 robotic instruments to improve surgeon autonomy. Step 1: the lower pole of the kidney was dissected and this was retracted upwards and laterally. This maneuver was performed using the 3rd robotic arm with the Prograsp Forceps. Step 2: the monopolar scissors was replaced (robotic arm 1) with the robotic EndoWrist clip applier, 10 mm Hem-o-Lok. The renal artery and vein were controlled and transected by the main surgeon. Step 3: the superior, posterolateral dissection and all bleeders were carefully coagulated by the surgeon with the EndoWrist one vessel sealer. We have now performed 15 RALRN following these steps. Our results were: blood loss 300 cc, console time 140 min, operating room time 200 min, anesthesia time 180 min, hospital stay 2.5 days, 1 incisional hernia, pathology: (13) RCC clear cell, (1) chromophobe and (1) papillary type 1. Tumor Stage: (5) T1b, (8) T2a, (2) T2b. We provide a concise, step-by-step technique for radical nephrectomy (RN) using the Da Vinci Si robotic system that may provide more autonomy to the surgeon, while maintaining surgical outcome equivalent to standard laparoscopic RN.

Laser fiber cleaving techniques: effects on tip morphology and power output.

PubMed

Vassantachart, Janna M; Lightfoot, Michelle; Yeo, Alexander; Maldonado, Jonathan; Li, Roger; Alsyouf, Muhannad; Martin, Jacob; Lee, Michael; Olgin, Gaudencio; Baldwin, D Duane

2015-01-01

Proper cleaving of reusable laser fibers is needed to maintain optimal functionality. This study quantifies the effect of different cleaving tools on power output of the holmium laser fiber and demonstrates morphologic changes using microscopy. The uncleaved tips of new 272 μm reusable laser fibers were used to obtain baseline power transmission values at 3 W (0.6 J, 5 Hz). Power output for each of four cleaving techniques-11-blade scalpel, scribe pen cleaving tool, diamond cleaving wheel, and suture scissors-was measured in a single-blinded fashion. Dispersion of light from the fibers was compared with manufacturer specifications and rated as "ideal," "acceptable," or "unacceptable" by blinded reviewers. The fiber tips were also imaged using confocal and scanning electron microscopy. Independent samples Kruskal-Wallis test and chi square were used for statistical analysis (α<0.05). New uncleaved fiber tips transmitted 3.04 W of power and were used as a reference (100%). The scribe pen cleaving tool produced the next highest output (97.1%), followed by the scalpel (83.4%), diamond cleaving wheel (77.1%), and suture scissors (61.7%), a trend that was highly significant (P<0.001). On pairwise comparison, no difference in power output was seen between the uncleaved fiber tips and those cleaved with the scribe pen (P=1.0). The rating of the light dispersion patterns from the different cleaving methods followed the same trend as the power output results (P<0.001). Microscopy showed that the scribe pen produced small defects along the fiber cladding but maintained a smooth, flat core surface. The other cleaving techniques produced defects on both the core and cladding. Cleaving techniques produce a significant effect on the initial power transmitted by reusable laser fibers. The scribe pen cleaving tool produced the most consistent and highest average power output.

Continuous model for the rock-scissors-paper game between bacteriocin producing bacteria.

PubMed

Neumann, Gunter; Schuster, Stefan

2007-06-01

In this work, important aspects of bacteriocin producing bacteria and their interplay are elucidated. Various attempts to model the resistant, producer and sensitive Escherichia coli strains in the so-called rock-scissors-paper (RSP) game had been made in the literature. The question arose whether there is a continuous model with a cyclic structure and admitting an oscillatory dynamics as observed in various experiments. The May-Leonard system admits a Hopf bifurcation, which is, however, degenerate and hence inadequate. The traditional differential equation model of the RSP-game cannot be applied either to the bacteriocin system because it involves positive interaction terms. In this paper, a plausible competitive Lotka-Volterra system model of the RSP game is presented and the dynamics generated by that model is analyzed. For the first time, a continuous, spatially homogeneous model that describes the competitive interaction between bacteriocin-producing, resistant and sensitive bacteria is established. The interaction terms have negative coefficients. In some experiments, for example, in mice cultures, migration seemed to be essential for the reinfection in the RSP cycle. Often statistical and spatial effects such as migration and mutation are regarded to be essential for periodicity. Our model gives rise to oscillatory dynamics in the RSP game without such effects. Here, a normal form description of the limit cycle and conditions for its stability are derived. The toxicity of the bacteriocin is used as a bifurcation parameter. Exact parameter ranges are obtained for which a stable (robust) limit cycle and a stable heteroclinic cycle exist in the three-species game. These parameters are in good accordance with the observed relations for the E. coli strains. The roles of growth rate and growth yield of the three strains are discussed. Numerical calculations show that the sensitive, which might be regarded as the weakest, can have the longest sojourn times.

KENNEDY SPACE CENTER, FLA. - Center Director and former astronaut Roy D. Bridges, Jr., (holding scissors) cuts the ribbon at a ceremony officially opening the U.S. Astronaut Hall of Fame as part of the Kennedy Space Center Visitor Complex. Invited guests and dignitaries look on, such as former astronauts Edgar D. Mitchell on Bridges' left and James Lovell (hand up) and Buzz Aldrin on his right. The ceremony was held in conjunction with the induction of four Space Shuttle astronauts into the Hall of Fame including Daniel Brandenstein, Robert "Hoot" Gibson, Story Musgrave, and Sally Ride. Conceived by six of the Mercury Program astronauts, the U.S. Astronaut Hall of Fame opened in 1990 to provide a place where space travelers could be remembered for their participation and accomplishments in the U.S. space program. The four new inductees join 48 previously honored astronauts from the ranks of the Gemini, Apollo, Skylab, Apollo-Soyuz, and Space Shuttle programs.

NASA Image and Video Library

2003-06-20

KENNEDY SPACE CENTER, FLA. - Center Director and former astronaut Roy D. Bridges, Jr., (holding scissors) cuts the ribbon at a ceremony officially opening the U.S. Astronaut Hall of Fame as part of the Kennedy Space Center Visitor Complex. Invited guests and dignitaries look on, such as former astronauts Edgar D. Mitchell on Bridges' left and James Lovell (hand up) and Buzz Aldrin on his right. The ceremony was held in conjunction with the induction of four Space Shuttle astronauts into the Hall of Fame including Daniel Brandenstein, Robert "Hoot" Gibson, Story Musgrave, and Sally Ride. Conceived by six of the Mercury Program astronauts, the U.S. Astronaut Hall of Fame opened in 1990 to provide a place where space travelers could be remembered for their participation and accomplishments in the U.S. space program. The four new inductees join 48 previously honored astronauts from the ranks of the Gemini, Apollo, Skylab, Apollo-Soyuz, and Space Shuttle programs.

Ivor Lewis esophagectomy with manual esogastric anastomosis by thoracoscopy in prone position and laparoscopy.

PubMed

Cadière, G B; Dapri, G; Himpens, J; Fodderie, L; Rajan, A

2010-06-01

Only a few authors have reported the technique of Ivor Lewis esophagectomy by minimally invasive means, and anastomosis was usually performed by a circular stapler. We report an Ivor Lewis esophagogastrectomy with manual esogastric anastomosis performed by thoracoscopy in the prone position. An adenocarcinoma of the distal esophagus without lymph nodes invasion was diagnosed in a 51-year-old man. General anesthesia and double-lumen endotracheal tube intubation were used. First the patient was placed in the supine position, and five abdominal trocars were placed. Celiac lymphadenectomy was performed with section of the left gastric vessels. A wide Kocher maneuver and pyloroplasty were performed. A wide gastric tube was performed and advanced through the hiatus into the right chest. Subsequently the patient was placed in the prone position. Three trocars (two 5-mm and one 11-mm) were placed on the posterior axillary line in the fifth, seventh, and ninth right intercostal space. The intrathoracic esophagus was dissected. Mediastinal lymphadenectomy with en bloc resection of the left inferior mediastinal pleura was performed. The azygos vein was sectioned, and the esophagus was transected by scissors 1-cm cranial to the azygos vein. A completely thoracoscopic manual double-layer anastomosis was performed by using running sutures with PDS 2/0 externally and Maxon 4/0 internally. Finally the patient was replaced in the supine position to retrieve the specimen through a suprapubic incision, and the gastric tube was fixed to the hiatus. Thoracoscopy lasted 157' (anastomosis 40'), laparoscopy 160', and second laparoscopy 20'. Blood loss was estimated at 170 ml. The gastrograffin swallow on postoperative day 4 showed absence of stenosis and leak. The patient was discharged on postoperative day 6. Thoracoscopy in the prone position allows the surgeon to perform a thoracoscopic esogastric anastomosis completely handsewn without selective lung desufflation, and using only three trocars.

Comparison between resection, bipolar coagulation and Plasmajet®: A preliminary animal study.

PubMed

Bourdel, Nicolas; Chauvet, Pauline; Roman, Horace; Pereira, Bruno; Somcutian, Oana; Dechelotte, Pierre J; Canis, Michel

2017-04-01

To compare the most used types of surgical techniques, for peritoneal lesions management, to Plasmajet® (PJ), in term of healing and post-operative adhesion. Prospective, experimental animal study. Female pigs (Landrace/Large White-Pietran) weighing 20-25kgs were used for the experiments. Eleven areas of 2cm 2 were treated on each lateral side of the peritoneal wall. Two areas of control, 2 of surgical resection with scissors, 2 of bipolar coagulation, 2 of Plasmajet® 10 low (PJ10L, adjustment of the Plasmajet®) used in contact with the peritoneum, 2 of PJ10L used at 3-5mm from the peritoneum, 2 of PJ10L used at 10mm, 2 of PJ used at 10 High (PJ10H) close to the peritoneum, 2 of PJ10H used at 3-5mm, 2 of PJ10H used at 10mm, 2 of PJ used at 40 Low (PJ40L) used at 3-5mm, 2 of PJ40L used at 10mm from the peritoneum. For each 2 areas, one was removed immediately for histological analysis. All animals were reoperated 14days later to evaluate macroscopic healing, adhesion score, histological inflammation and mesothelialization. Immediate histological analysis shows that in every treated area the peritoneum was completely vaporized, coagulated or removed. After resection, the healing was macroscopically perfect and there was no adhesion, as in the control area. After bipolar coagulation in half of cases there was adhesion. There was no adhesion after treatment by Plasmajet® 10 low used at 10mm from the peritoneum. Surgical resection leads to perfect healing, and no adhesion formation. The use of Plasmajet® 10 low used at 10mm from the peritoneum could be an alternative to resection, because it allows complete superficial destruction, with a low rate of adhesion. Further study is required to explore and assess fully the potential of this device. Copyright © 2017 Elsevier B.V. All rights reserved.

DDD versus VVIR pacing in patients, ages 70 and over, with complete heart block.

PubMed

Ouali, Sana; Neffeti, Elyes; Ghoul, Karima; Hammas, Sami; Kacem, Slim; Gribaa, Rim; Remedi, Fahmi; Boughzela, Essia

2010-05-01

Dual-chamber pacing is believed to have an advantage over single-chamber ventricular pacing. The aim of the study was to determine whether elderly patients with implanted pacemaker for complete atrioventricular block gain significant benefit from dual-chamber (DDD) compared with single-chamber ventricular demand (VVIR). The study was designed as a double-blind randomized two-period crossover study-each pacing mode was maintained for 3 months. Thirty patients (eight men, mean age 76.5 +/- 4.3 years) with implanted PM were submitted to a standard protocol, which included an interview, functional class assessment, quality of life (QoL) questionnaires, 6-minute walk test, and transthoracic echocardiographic examinations. QoL was measured by the SF-36. All these parameters were obtained on DDD mode pacing and VVIR mode pacing. Paired data were compared. QoL was significantly different between the two groups and showed the best values in DDD. Overall, no patient preferred VVIR mode, 18 preferred DDD mode, and 12 expressed no preference. No differences in mean walking distances were observed between patients with single-chamber and dual-chamber pacing. VVI pacing elicited marked decrease in left ventricle ejection fraction and significant enlargement of the left atrium. DDD pacing resulted in significant increase of the peak systolic velocities in lateral mitral annulus and septal mitral annulus. Early diastolic velocities on both sides of mitral annulus did not change. In active elderly patients with complete heart block, DDD pacing is associated with improved quality of life and systolic ventricular function compared with VVI pacing.

40 CFR 1033.520 - Alternative ramped modal cycles.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Following the completion of the third test phase of the applicable ramped modal cycle, conduct the post... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM LOCOMOTIVES Test Procedures § 1033.520 Alternative ramped modal... locomotive notch settings. Ramped modal cycles combine multiple test modes of a discrete-mode steady-state...

Effect of electrode biasing on m/n  =  2/1 tearing modes in J-TEXT experiments

NASA Astrophysics Data System (ADS)

Liu, Hai; Hu, Qiming; Chen, Zhipeng; Yu, Q.; Zhu, Lizhi; Cheng, Zhifeng; Zhuang, Ge; Chen, Zhongyong

2017-01-01

The effects of electrode biasing (EB) on the m/n  =  2/1 tearing mode have been experimentally studied in J-TEXT tokamak discharges, where m and n are the poloidal and toroidal mode numbers. It is found that for a negative bias voltage, the mode amplitude is reduced, and the mode frequency is increased accompanied by the increased toroidal plasma rotation speed in the counter-I p direction. For a positive bias voltage, the mode frequency is decreased together with the change of the rotation velocity towards the co-I p direction, and the mode amplitude is increased. Statistic results show that the variations in the toroidal rotation speed, the 2/1 mode frequency and its amplitude linearly depend on the bias voltage. The threshold voltages for complete suppression and locking of the mode are found. The experimental results suggest that applied electrode biasing is a possible method for the avoidance of mode locking and disruption.

Overdense microwave plasma heating in the CNT stellarator

NASA Astrophysics Data System (ADS)

Hammond, K. C.; Diaz-Pacheco, R. R.; Köhn, A.; Volpe, F. A.; Wei, Y.

2018-02-01

Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping of the X-mode at the upper hybrid resonant layer. The X-mode reaches that location by tunneling, mode-conversions or after polarization-scrambling reflections off the wall and in-vessel coils, regardless of the initial launch being in O- or X-mode. This interpretation was confirmed by full-wave numerical simulations. Also, as the CNT plasma is not completely ionized at these low microwave power levels, electron density was shown to increase with power. A dependence on magnetic field strength was also observed, for O-mode launch.

REVIEW ARTICLE: Harmonically mode-locked semiconductor-based lasers as high repetition rate ultralow noise pulse train and optical frequency comb sources

NASA Astrophysics Data System (ADS)

Quinlan, F.; Ozharar, S.; Gee, S.; Delfyett, P. J.

2009-10-01

Recent experimental work on semiconductor-based harmonically mode-locked lasers geared toward low noise applications is reviewed. Active, harmonic mode-locking of semiconductor-based lasers has proven to be an excellent way to generate 10 GHz repetition rate pulse trains with pulse-to-pulse timing jitter of only a few femtoseconds without requiring active feedback stabilization. This level of timing jitter is achieved in long fiberized ring cavities and relies upon such factors as low noise rf sources as mode-lockers, high optical power, intracavity dispersion management and intracavity phase modulation. When a high finesse etalon is placed within the optical cavity, semiconductor-based harmonically mode-locked lasers can be used as optical frequency comb sources with 10 GHz mode spacing. When active mode-locking is replaced with regenerative mode-locking, a completely self-contained comb source is created, referenced to the intracavity etalon.

Using System Dynamics Analysis for Evaluating the Sustainability of “Complete Streets” Practices

EPA Science Inventory

If “complete streets” practices are followed, transportation corridor designs accommodate multiple modes of transportation. When transportation engineers and planners consider implementing these practices, they must decide what portion of a transportation corridor&rs...

Improving completion rates for client intake forms through Audio Computer-Assisted Self-Interview (ACASI): results from a pilot study with the Avon Breast Health Outreach Program.

PubMed

Hallum-Montes, Rachel; Senter, Lindsay; D'Souza, Rohan; Gates-Ferris, Kathryn; Hurlbert, Marc; Anastario, Michael

2014-01-01

This study compares rates of completion of client intake forms (CIFs) collected via three interview modes: audio computer-assisted self-interview (ACASI), face-to-face interview (FFI), and self-administered paper-based interview (SAPI). A total of 303 clients served through the Avon Breast Health Outreach Program (BHOP) were sampled from three U.S. sites. Clients were randomly assigned to complete a standard CIF via one of the three interview modes. Logistic regression analyses demonstrated that clients were significantly more likely to complete the entire CIF via ACASI than either FFI or SAPI. The greatest observed differences were between ACASI and SAPI; clients were almost six times more likely to complete the CIF via ACASI as opposed to SAPI (AOR = 5.8, p < .001). We recommend that where feasible, ACASI be utilized as an effective means of collecting client-level data in healthcare settings. Adoption of ACASI in health centers may translate into higher completion rates of intake forms by clients, as well as reduced burden on clinic staff to enter data and review intake forms for completion. © 2013 National Association for Healthcare Quality.

Inertial modes in a rotating triaxial ellipsoid

PubMed Central

Vantieghem, S.

2014-01-01

In this work, we present an algorithm that enables computation of inertial modes and their corresponding frequencies in a rotating triaxial ellipsoid. The method consists of projecting the inertial mode equation onto finite-dimensional bases of polynomial vector fields. It is shown that this leads to a well-posed eigenvalue problem, and hence, that eigenmodes are of polynomial form. Furthermore, these results shed new light onto the question whether the eigenmodes form a complete basis, i.e. whether any arbitrary velocity field can be expanded in a sum of inertial modes. Finally, we prove that two intriguing integral properties of inertial modes in rotating spheres and spheroids also extend to triaxial ellipsoids. PMID:25104908

Full statistical mode reconstruction of a light field via a photon-number-resolved measurement

NASA Astrophysics Data System (ADS)

Burenkov, I. A.; Sharma, A. K.; Gerrits, T.; Harder, G.; Bartley, T. J.; Silberhorn, C.; Goldschmidt, E. A.; Polyakov, S. V.

2017-05-01

We present a method to reconstruct the complete statistical mode structure and optical losses of multimode conjugated optical fields using an experimentally measured joint photon-number probability distribution. We demonstrate that this method evaluates classical and nonclassical properties using a single measurement technique and is well suited for quantum mesoscopic state characterization. We obtain a nearly perfect reconstruction of a field comprised of up to ten modes based on a minimal set of assumptions. To show the utility of this method, we use it to reconstruct the mode structure of an unknown bright parametric down-conversion source.

Utilizing wheel-ring architecture for stable and selectable single-longitudinal-mode erbium fiber laser

NASA Astrophysics Data System (ADS)

Yeh, Chien-Hung; Yang, Zi-Qing; Huang, Tzu-Jung; Chow, Chi-Wai

2018-03-01

To achieve a steady single-longitudinal-mode (SLM) erbium-doped fiber (EDF) laser, the wheel-ring architecture is proposed in the laser cavity. According to Vernier effect, the proposed wheel-ring can produce three different free spectrum ranges (FSRs) to serve as the mode-filter for suppressing the densely multi-longitudinal-mode (MLM). Here, to complete wavelength-tunable EDF laser, an optical tunable bandpass filter (OTBF) is utilized inside the cavity for tuning arbitrarily. In addition, the entire output performances of the proposed EDF wheel-ring laser are also discussed and analyzed experimentally.

A multiple-scenario assessment of the effect of a continuous-care, guideline-based decision support system on clinicians' compliance to clinical guidelines.

PubMed

Shalom, Erez; Shahar, Yuval; Parmet, Yisrael; Lunenfeld, Eitan

2015-04-01

To quantify the effect of a new continuous-care guideline (GL)-application engine, the Picard decision support system (DSS) engine, on the correctness and completeness of clinicians' decisions relative to an established clinical GL, and to assess the clinicians' attitudes towards a specific DSS. Thirty-six clinicians, including residents at different training levels and board-certified specialists at an academic OB/GYN department that handles around 15,000 deliveries annually, agreed to evaluate our continuous-care guideline-based DSS and to perform a cross-over assessment of the effects of using our guideline-based DSS. We generated electronic patient records that realistically simulated the longitudinal course of six different clinical scenarios of the preeclampsia/eclampsia/toxemia (PET) GL, encompassing 60 different decision points in total. Each clinician managed three scenarios manually without the Picard DSS engine (Non-DSS mode) and three scenarios when assisted by the Picard DSS engine (DSS mode). The main measures in both modes were correctness and completeness of actions relative to the PET GL. Correctness was further decomposed into necessary and redundant actions, relative to the guideline and the actual patient data. At the end of the assessment, a questionnaire was administered to the clinicians to assess their perceptions regarding use of the DSS. With respect to completeness, the clinicians applied approximately 41% of the GL's recommended actions in the non-DSS mode. Completeness increased to the performance of approximately 93% of the guideline's recommended actions, when using the DSS mode. With respect to correctness, approximately 94.5% of the clinicians' decisions in the non-DSS mode were correct. However, these included 68% of the actions that were correct but redundant, given the patient's data (e.g., repeating tests that had been performed), and 27% of the actions, which were necessary in the context of the GL and of the given scenario. Only 5.5% of the decisions were definite errors. In the DSS mode, 94% of the clinicians' decisions were correct, which included 3% that were correct but redundant, and 91% of the actions that were correct and necessary in the context of the GL and of the given scenario. Only 6% of the DSS-mode decisions were erroneous. The DSS was assessed by the clinicians as potentially useful. Support from the GL-based DSS led to uniformity in the quality of the decisions, regardless of the particular clinician, any particular clinical scenario, any particular decision point, or any decision type within the scenarios. Using the DSS dramatically enhances completeness (i.e., performance of guideline-based recommendations) and seems to prevent the performance of most of the redundant actions, but does not seem to affect the rate of performance of incorrect actions. The redundancy rate is enhanced by similar recent findings in recent studies. Clinicians mostly find this support to be potentially useful for their daily practice. A continuous-care GL-based DSS, such as the Picard DSS engine, has the potential to prevent most errors of omission by ensuring uniformly high quality of clinical decision making (relative to a GL-based norm), due to the increased adherence (i.e., completeness) to the GL, and most of the errors of commission that increase therapy costs, by reducing the rate of redundant actions. However, to prevent clinical errors of commission, the DSS needs to be accompanied by additional modules, such as automated control of the quality of the physician's actual actions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Passive zero-gravity leg restraint

NASA Technical Reports Server (NTRS)

Miller, Christopher R. (Inventor)

1989-01-01

A passive zero or microgravity leg restraint is described which includes a central support post with a top and a bottom. Extending from the central support post are a calf pad tab, to which calf pad is attached, and a foot pad tab, to which foot tab is attached. Also extending from central support post are knee pads. When the restraint is in use the user's legs are forced between pads by a user imposed scissors action of the legs. The user's body is then supported in a zero or microgravity neutral body posture by the leg restraint. The calf pad has semi-ridig elastic padding material covering structural stiffener. The foot pad has padding material and a structural stiffener. Knee pads have s structural tube stiffener at their core.

Bandgap tuning in highly c-axis oriented Zn1-xMgxO thin films

NASA Astrophysics Data System (ADS)

Kumar, Parmod; Malik, Hitendra K.; Ghosh, Anima; Thangavel, R.; Asokan, K.

2013-06-01

We propose Mg doping in zinc oxide (ZnO) films for realizing wider optical bandgap in highly c-axis oriented Zn1-xMgxO (0 ≤ x ≤ 0.3) thin films. A remarkable enhancement of 25% in the bandgap by 30% Mg doping was achieved. The bandgap was tuned between 3.25 eV (ZnO) and 4.06 eV (Zn0.7Mg0.3O), which was further confirmed by density functional theory based wien2k simulation employing a combined generalized gradient approximation with scissor corrections. The change of stress and crystallite size in these films were found to be the causes for the observed blueshift in the bandgap.

Physiologic Responses to Motorized and Non-Motorized Locomotion Utilizing the International Space Station Treadmill

NASA Technical Reports Server (NTRS)

Smith, Cassie; Lee, Stuart MC; Laughlin, Mitzi; Loehr, James; Norcross, Jason; DeWitt, John; Hagan, R. D.

2006-01-01

Treadmill locomotion is used onboard the International Space Station (ISS) as a countermeasure to the effects of prolonged weightlessness. The treadmill operates in two modes: motorized (T-M) and non-motorized (T-NM). Little is known about the potential physiologic differences between modes which may affect countermeasure exercise prescription. PURPOSE: To quantify heart rate (HR), oxygen consumption (VO2), perceived exertion (RPE), and blood lactate (BLa) during T-M and T-NM locomotion at 2 and 4 mph in normal ambulatory subjects. METHODS: Twenty subjects (10 men, 10 women; 31+/-5 yr, 172+/-10 cm, 68+/-13 kg, mean SD) with a treadmill peakVO2 of 45.5+/-5.4 ml/kg/min (mean+/-SD) exercised on the ground-based ISS treadmill. Following a familiarization session in each mode, subjects completed two data collection sessions, T-M and T-NM in random order, at 2 and 4 mph. Subjects attempted to complete 5 min of exercise at each speed; if they could not maintain the speed, the trial was discontinued. At least 5 minutes of rest separated each speed trial, and at least 48 hrs separated each session. VO2 was measured continuously (metabolic gas analysis), while HR (HR monitor) and RPE (Borg Chart, 6-20 scale) were recorded each min. Not all subjects completed 5 min during each condition, therefore the mean of the min 3 and 4 was taken as representative of steady-state. BLa was measured (finger stick) within 2 min post-exercise. Paired t-tests were used to test for differences (p<0.05) between treadmill modes within the same speed. RESULTS: All twenty subjects completed at least 4 min of exercise during all conditions, except T-NM 4 mph when only 11 subjects completed the minimum exercise duration. VO2, HR, RPE and BLa were significantly higher during T-NM locomotion at both speeds.

Functional genomic approaches for understanding the mode of action of Bacillus sp biocontrol strains

USDA-ARS?s Scientific Manuscript database

Complete genome sequencing of several Bacillus sp. strains has shed new light on the mode of action of these antagonists of plant pathogens. The use of genomic data mining tools provided the ability to quickly determine the potential of these strains to produce bioactive secondary metabolites. Our B...

Determining Factors in Student Retention in Online Courses

ERIC Educational Resources Information Center

Friðriksdóttir, Kolbrún; Arnbjörnsdóttir, Birna

2017-01-01

The rapid growth of online education courses, especially Massive Open Online Courses (MOOCs), has called attention to the issue of student retention and low overall completion rates (Gaebel, 2013). The impact of different modes of delivery on retention has also received attention with a blended learning mode being deemed most effective in…

Work Group Communication Modes and the Assessment of Contingency and Situational Models of Leadership.

ERIC Educational Resources Information Center

Stech, Ernest L.

A study of coordination modes in work group communication was conducted to evaluate and expand leadership contingency models. A total of 106 people in classes and workshops on organizational communication completed seven questionnaires resulting in nine measures of six independent variables representing the following contingency factors from…

Hierarchical Letters in ASD: High Stimulus Variability under Different Attentional Modes

ERIC Educational Resources Information Center

Van der Hallen, Ruth; Vanmarcke, Steven; Noens, Ilse; Wagemans, Johan

2017-01-01

Studies using hierarchical patterns to test global precedence and local-global interference in individuals with ASD have produced mixed results. The current study focused on stimulus variability and locational uncertainty, while using different attentional modes. Two groups of 44 children with and without ASD completed a divided attention task as…

The Changing Nature of Parent-Teacher Communication: Mode Selection in the Smartphone Era

ERIC Educational Resources Information Center

Thompson, Blair Christopher; Mazer, Joseph P.; Flood Grady, Elizabeth

2015-01-01

Parent-teacher communication continues to evolve due to smartphones and other new communication technologies. In all, 1,349 parents completed the Parental Academic Support Scale to assess the frequency and importance of communication across modes. Confirmatory analysis revealed a good model fit. Media richness theory was applied to parents'…

Predictors of Academic Success in Web-Based Courses: Age, GPA, and Instruction Mode

ERIC Educational Resources Information Center

Vella, Elizabeth J.; Turesky, Elizabeth F.; Hebert, Jenni

2016-01-01

Purpose: The purpose of this paper is to use a heutagogical approach to determine whether students enrolled in blended courses achieve higher grades relative to those enrolled in completely online courses, in addition to identifying demographic predictors of academic success in college courses involving Web-based modes of instruction.…

Dual-Pump CARS Measurements in the University of Virginia's Dual-Mode Scramjet: Configuration "C"

NASA Technical Reports Server (NTRS)

Cutler, Andrew D.; Magnotti, Gaetano; Cantu, Luca; Gallo, Emanuela; Danehy, Paul M.; Rockwell, Robert; Goyne, Christopher; McDaniel, James

2013-01-01

Measurements have been conducted at the University of Virginia Supersonic Combustion Facility in configuration C of the dual-mode scramjet. This is a continuation of previously published works on configuration A. The scramjet is hydrogen fueled and operated at two equivalence ratios, one representative of the scram mode and the other of the ram mode. Dual-pump CARS was used to acquire the mole fractions of the major species as well as the rotational and vibrational temperatures of N2. Developments in methods and uncertainties in fitting CARS spectra for vibrational temperature are discussed. Mean quantities and the standard deviation of the turbulent fluctuations at multiple planes in the flow path are presented. In the scram case the combustion of fuel is completed before the end of the measurement domain, while for the ram case the measurement domain extends into the region where the flow is accelerating and combustion is almost completed. Higher vibrational than rotational temperature is observed in those parts of the hot combustion plume where there is substantial H2 (and hence chemical reaction) present.

Feedback stabilization of resistive wall modes in a reversed-field pinch

NASA Astrophysics Data System (ADS)

Brunsell, P. R.; Yadikin, D.; Gregoratto, D.; Paccagnella, R.; Liu, Y. Q.; Cecconello, M.; Drake, J. R.; Manduchi, G.; Marchiori, G.

2005-09-01

An array of saddle coils having Nc=16 equally spaced positions along the toroidal direction has been installed for feedback control of resistive wall modes (RWMs) on the EXTRAP T2R reversed-field pinch [P. R. Brunsell, H. Bergsaker, M. Cecconello et al., Plasma Phys. Controlled Fusion 43, 1457 (2001)]. Using feedback, multiple nonresonant RWMs are simultaneously suppressed for three to four wall times. Feedback stabilization of RWMs results in a significant prolongation of the discharge duration. This is linked to a better sustainment of the plasma and tearing mode toroidal rotation with feedback. Due to the limited number of coils in the toroidal direction, pairs of modes with toroidal mode numbers n ,n' that fulfill the condition ∣n-n'∣=Nc are coupled by the feedback action from the discrete coil array. With only one unstable mode in a pair of coupled modes, the suppression of the unstable mode is successful. If two modes are unstable in a coupled pair, two possibilities exist: partial suppression of both modes or, alternatively, complete stabilization of one target mode while the other is left unstable.

Distributed communication and psychosocial performance in simulated space dwelling groups

NASA Astrophysics Data System (ADS)

Hienz, R. D.; Brady, J. V.; Hursh, S. R.; Ragusa, L. C.; Rouse, C. O.; Gasior, E. D.

2005-05-01

The present report describes the development and application of a distributed interactive multi-person simulation in a computer-generated planetary environment as an experimental test bed for modeling the human performance effects of variations in the types of communication modes available, and in the types of stress and incentive conditions underlying the completion of mission goals. The results demonstrated a high degree of interchangeability between communication modes (audio, text) when one mode was not available. Additionally, the addition of time pressure stress to complete tasks resulted in a reduction in performance effectiveness, and these performance reductions were ameliorated via the introduction of positive incentives contingent upon improved performances. The results obtained confirmed that cooperative and productive psychosocial interactions can be maintained between individually isolated and dispersed members of simulated spaceflight crews communicating and problem-solving effectively over extended time intervals without the benefit of one another's physical presence.

Transient analysis mode participation for modal survey target mode selection using MSC/NASTRAN DMAP

NASA Technical Reports Server (NTRS)

Barnett, Alan R.; Ibrahim, Omar M.; Sullivan, Timothy L.; Goodnight, Thomas W.

1994-01-01

Many methods have been developed to aid analysts in identifying component modes which contribute significantly to component responses. These modes, typically targeted for dynamic model correlation via a modal survey, are known as target modes. Most methods used to identify target modes are based on component global dynamic behavior. It is sometimes unclear if these methods identify all modes contributing to responses important to the analyst. These responses are usually those in areas of hardware design concerns. One method used to check the completeness of target mode sets and identify modes contributing significantly to important component responses is mode participation. With this method, the participation of component modes in dynamic responses is quantified. Those modes which have high participation are likely modal survey target modes. Mode participation is most beneficial when it is used with responses from analyses simulating actual flight events. For spacecraft, these responses are generated via a structural dynamic coupled loads analysis. Using MSC/NASTRAN DMAP, a method has been developed for calculating mode participation based on transient coupled loads analysis results. The algorithm has been implemented to be compatible with an existing coupled loads methodology and has been used successfully to develop a set of modal survey target modes.

The ACE multi-user web-based Robotic Observatory Control System

NASA Astrophysics Data System (ADS)

Mack, P.

2003-05-01

We have developed an observatory control system that can be operated in interactive, remote or robotic modes. In interactive and remote mode the observer typically acquires the first object then creates a script through a window interface to complete observations for the rest of the night. The system closes early in the event of bad weather. In robotic mode observations are submitted ahead of time through a web-based interface. We present observations made with a 1.0-m telescope using these methods.

Forced response of mistuned bladed disk assemblies

NASA Technical Reports Server (NTRS)

Watson, Brian C.; Kamat, Manohar P.; Murthy, Durbha V.

1993-01-01

A complete analytic model of mistuned bladed disk assemblies, designed to simulate the dynamical behavior of these systems, is analyzed. The model incorporates a generalized method for describing the mistuning of the assembly through the introduction of specific mistuning modes. The model is used to develop a computational bladed disk assembly model for a series of parametric studies. Results are presented demonstrating that the response amplitudes of bladed disk assemblies depend both on the excitation mode and on the mistune mode.

A complete dc characterization of a constant-frequency, clamped-mode, series-resonant converter

NASA Technical Reports Server (NTRS)

Tsai, Fu-Sheng; Lee, Fred C.

1988-01-01

The dc behavior of a clamped-mode series-resonant converter is characterized systematically. Given a circuit operating condition, the converter's mode of operation is determined and various circuit parameters are calculated, such as average inductor current (load current), rms inductor current, peak capacitor voltage, rms switch currents, average diode currents, switch turn-on currents, and switch turn-off currents. Regions of operation are defined, and various circuit characteristics are derived to facilitate the converter design.

Acoustic mode measurements in the inlet of a model turbofan using a continuously rotating rake

NASA Astrophysics Data System (ADS)

Heidelberg, Laurence J.; Hall, David G.

1993-01-01

Comprehensive measurements of the spinning acoustic mode structure in the inlet of the Advanced Ducted Propeller (ADP) have been completed. These measurements were taken using a unique and previously untried method which was first proposed by T.G. Sofrin. A continuously rotating microphone system was employed. The ADP model was designed and built by Pratt & Whitney and tested in the NASA Lewis 9- by 15-foot Anechoic Wind Tunnel. Three inlet configurations were tested with cut-on and cutoff stator vane sets. The cutoff stator was designed to suppress all modes at the blade passing frequency. Rotating rake measurements indicate that several extraneous circumferential modes were active. The mode orders suggest that their source was an interaction between the rotor and small interruptions in the casing tip treatment. The cut-on stator produced the expected circumferential modes plus higher levels of the unexpected modes seen with the cutoff stator.

Acoustic Mode Measurements in the Inlet of a Model Turbofan Using a Continuously Rotating Rake

NASA Technical Reports Server (NTRS)

Heidelberg, Laurence J.; Hall, David G.

1992-01-01

Comprehensive measurements of the spinning acoustic mode structure in the inlet of the Advanced Ducted Propeller (ADP) have been completed. These measurements were taken using a unique and previously untried method which was first proposed by T.G. Sofrin. A continuously rotating microphone system was employed. The ADP model was designed and built by Pratt & Whitney and tested in the NASA Lewis 9- by 15-foot Anechoic Wind Tunnel. Three inlet configurations were tested with cut-on and cutoff stator vane sets. The cutoff stator was designed to suppress all modes at the blade passing frequency. Rotating rake measurements indicate that several extraneous circumferential modes were active. The mode orders suggest that their source was an interaction between the rotor and small interruptions in the casing tip treatment. The cut-on stator produced the expected circumferential modes plus higher levels of the unexpected modes seen with the cutoff stator.

Tape recorder failure investigation

NASA Technical Reports Server (NTRS)

Higgins, M. D.; Loewenthal, S. H.; Carnahan, C. C.; Snyder, G. L.

1996-01-01

Two end-item tape recorders lost 4:1 mode data recording mode capability at less than half of their 1 6,000-cycle, 4-year operating life. Subsequent life tests on two spare recorders also experienced 4:1 mode data loss at 8,000 and 11,700 cycles. Tear down inspection after completion of the life tests showed that the tape had worn through the alfesil record and reproduce heads. An investigation was initiated to understand the cause of excessive tape head wear and the reasons why the 4:1 mode data rate, low-speed mode is more damaging than the 1:1 mode data rate, high-speed recording mode. The objective was to establish how operating conditions (tape speed, humidity, temperature, stop/start cycles) affects head life with the goal of extending head life on the remaining in-service tape recorders. Another interest was to explain why an earlier vendor life test showed capability beyond 16,000 cycles.

Duality of Iron Oxide Nanoparticles in Cancer Therapy: Amplification of Heating Efficiency by Magnetic Hyperthermia and Photothermal Bimodal Treatment.

PubMed

Espinosa, Ana; Di Corato, Riccardo; Kolosnjaj-Tabi, Jelena; Flaud, Patrice; Pellegrino, Teresa; Wilhelm, Claire

2016-02-23

The pursuit of innovative, multifunctional, more efficient, and safer treatments is a major challenge in preclinical nanoparticle-mediated thermotherapeutic research. Here, we report that iron oxide nanoparticles have the dual capacity to act as both magnetic and photothermal agents. We further explore every key aspect of this magnetophotothermal approach, choosing iron oxide nanocubes for their high efficiency for the magnetic hyperthermia modality itself. In aqueous suspension, the nanocubes' exposure to both: an alternating magnetic field and near-infrared laser irradiation (808 nm), defined as the DUAL-mode, amplifies the heating effect 2- to 5-fold by comparison with magnetic stimulation alone, yielding unprecedented heating powers (specific loss powers) up to 5000 W/g. In cancer cells, the laser excitation restores the optimal efficiency of magnetic hyperthermia, otherwise inhibited by intracellular confinement, resulting in a remarkable heating efficiency in the DUAL-mode (up to 15-fold amplification), with respect to the magnetophotothermal mode. As a consequence, the dual action yielded complete apoptosis-mediated cell death. In solid tumors in vivo, single-mode treatments (magnetic or laser hyperthermia) reduced tumor growth, while DUAL-mode treatment resulted in complete tumor regression, mediated by heat-induced tumoral cell apoptosis and massive denaturation of the collagen fibers, and a long-lasting thermal efficiency over repeated treatments.

Summary of Rocketdyne Engine A5 Rocket Based Combined Cycle Testing

NASA Technical Reports Server (NTRS)

Ketchum. A.; Emanuel, Mark; Cramer, John

1998-01-01

Rocketdyne Propulsion and Power (RPP) has completed a highly successful experimental test program of an advanced rocket based combined cycle (RBCC) propulsion system. The test program was conducted as part of the Advanced Reusable Technology program directed by NASA-MSFC to demonstrate technologies for low-cost access to space. Testing was conducted in the new GASL Flight Acceleration Simulation Test (FAST) facility at sea level (Mach 0), Mach 3.0 - 4.0, and vacuum flight conditions. Significant achievements obtained during the test program include 1) demonstration of engine operation in air-augmented rocket mode (AAR), ramjet mode and rocket mode and 2) smooth transition from AAR to ramjet mode operation. Testing in the fourth mode (scramjet) is scheduled for November 1998.

Spiral Transformation for High-Resolution and Efficient Sorting of Optical Vortex Modes.

PubMed

Wen, Yuanhui; Chremmos, Ioannis; Chen, Yujie; Zhu, Jiangbo; Zhang, Yanfeng; Yu, Siyuan

2018-05-11

Mode sorting is an essential function for optical multiplexing systems that exploit the orthogonality of the orbital angular momentum mode space. The familiar log-polar optical transformation provides a simple yet efficient approach whose resolution is, however, restricted by a considerable overlap between adjacent modes resulting from the limited excursion of the phase along a complete circle around the optical vortex axis. We propose and experimentally verify a new optical transformation that maps spirals (instead of concentric circles) to parallel lines. As the phase excursion along a spiral in the wave front of an optical vortex is theoretically unlimited, this new optical transformation can separate orbital angular momentum modes with superior resolution while maintaining unity efficiency.

Spiral Transformation for High-Resolution and Efficient Sorting of Optical Vortex Modes

NASA Astrophysics Data System (ADS)

Wen, Yuanhui; Chremmos, Ioannis; Chen, Yujie; Zhu, Jiangbo; Zhang, Yanfeng; Yu, Siyuan

2018-05-01

Mode sorting is an essential function for optical multiplexing systems that exploit the orthogonality of the orbital angular momentum mode space. The familiar log-polar optical transformation provides a simple yet efficient approach whose resolution is, however, restricted by a considerable overlap between adjacent modes resulting from the limited excursion of the phase along a complete circle around the optical vortex axis. We propose and experimentally verify a new optical transformation that maps spirals (instead of concentric circles) to parallel lines. As the phase excursion along a spiral in the wave front of an optical vortex is theoretically unlimited, this new optical transformation can separate orbital angular momentum modes with superior resolution while maintaining unity efficiency.

Therapeutic mode preferences and associated factors among Norwegian undergraduate occupational therapy students: A cross-sectional exploratory study.

PubMed

Yazdani, Farzaneh; Carstensen, Tove; Bonsaksen, Tore

2017-03-01

The Intentional Relationship Model is specifically focused on the relational aspect of therapy. The model describes six therapeutic modes; these represent different types of interaction for the therapist. However, preferences for therapeutic mode use are under researched. This study aims to describe preferences for therapeutic modes in undergraduate occupational therapy students, as well as to explore factors associated to each of the therapeutic modes. A sample of 96 occupational therapy students, based at two different Norwegian universities, participated in the study. They completed the Norwegian Self-Assessment of Modes Questionnaire along with sociodemographic information. Descriptive analysis, bivariate correlation and linear regression analysis were employed. The problem-solving mode was most frequently endorsed. There were generally weak associations between the variables, but female sex and being a student in the education program in Trondheim were associated with higher preference for collaboration. There is diversity in students' preferences for the modes, but the problem-solving mode was the most preferred. Students need to be aware of the mode they feel more comfortable with and make sure they use modes that fit with the specific client. The occupational therapy education programs need to incorporate raising awareness about therapeutic modes.

Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

NASA Technical Reports Server (NTRS)

Flores, Melissa; Malin, Jane T.

2013-01-01

An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

NASA Astrophysics Data System (ADS)

Flores, Melissa D.; Malin, Jane T.; Fleming, Land D.

2013-09-01

An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component's functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

Optimal geometry for a quartz multipurpose SPM sensor.

PubMed

Stirling, Julian

2013-01-01

We propose a geometry for a piezoelectric SPM sensor that can be used for combined AFM/LFM/STM. The sensor utilises symmetry to provide a lateral mode without the need to excite torsional modes. The symmetry allows normal and lateral motion to be completely isolated, even when introducing large tips to tune the dynamic properties to optimal values.

The Effects of Communication Mode on Negotiation of Meaning and Its Noticing

ERIC Educational Resources Information Center

Yuksel, Dogan; Inan, Banu

2014-01-01

This study examined the effects of communication mode ("i.e.", face to face versus computer mediated communication) on the instances of negotiation of meaning (NofM) and its level of noticing by learners. Sixty-four participants (32 dyads) completed two jigsaw tasks in two different mediums (one in each) and four days after the tasks…

Surveying ourselves: examining the use of a web-based approach for a physician survey.

PubMed

Matteson, Kristen A; Anderson, Britta L; Pinto, Stephanie B; Lopes, Vrishali; Schulkin, Jay; Clark, Melissa A

2011-12-01

A survey was distributed, using a sequential mixed-mode approach, to a national sample of obstetrician-gynecologists. Differences between responses to the web-based mode and the on-paper mode were compared to determine if there were systematic differences between respondents. Only two differences in respondents between the two modes were identified. University-based physicians were more likely to complete the web-based mode than private practice physicians. Mail respondents reported a greater volume of endometrial ablations compared to online respondents. The web-based mode had better data quality than the paper-based mailed mode in terms of less missing and inappropriate responses. Together, these findings suggest that, although a few differences were identified, the web-based survey mode attained adequate representativeness and improved data quality. Given the metrics examined for this study, exclusive use of web-based data collection may be appropriate for physician surveys with a minimal reduction in sample coverage and without a reduction in data quality.

A comparison of data quality and practicality of online versus postal questionnaires in a sample of testicular cancer survivors.

PubMed

Smith, Allan Ben; King, Madeleine; Butow, Phyllis; Olver, Ian

2013-01-01

We aimed to compare data quality from online and postal questionnaires and to evaluate the practicality of these different questionnaire modes in a cancer sample. Participants in a study investigating the psychosocial sequelae of testicular cancer could choose to complete a postal or online version of the study questionnaire. Data quality was evaluated by assessing sources of nonobservational errors such as participant nonresponse, item nonresponse and sampling bias. Time taken and number of reminders required for questionnaire return were used as indicators of practicality. Participant nonresponse was significantly higher among participants who chose the postal questionnaire. The proportion of questionnaires with missing items and the mean number of missing items did not differ significantly by mode. A significantly larger proportion of tertiary-educated participants and managers/professionals completed the online questionnaire. There were no significant differences in age, relationship status, employment status, country of birth or language spoken by completion mode. Compared with postal questionnaires, online questionnaires were returned significantly more quickly and required significantly fewer reminders. These results demonstrate that online questionnaire completion can be offered in a cancer sample without compromising data quality. In fact, data quality from online questionnaires may be superior due to lower rates of participant nonresponse. Investigators should be aware of potential sampling bias created by more highly educated participants and managers/professionals choosing to complete online questionnaires. Besides this issue, online questionnaires offer an efficient method for collecting high-quality data, with faster return and fewer reminders. Copyright © 2011 John Wiley & Sons, Ltd.

Performing Complex Tasks by Users With Upper-Extremity Disabilities Using a 6-DOF Robotic Arm: A Study.

PubMed

Al-Halimi, Reem K; Moussa, Medhat

2017-06-01

In this paper, we report on the results of a study that was conducted to examine how users suffering from severe upper-extremity disabilities can control a 6 degrees-of-freedom (DOF) robotics arm to complete complex activities of daily living. The focus of the study is not on assessing the robot arm but on examining the human-robot interaction patterns. Three participants were recruited. Each participant was asked to perform three tasks: eating three pieces of pre-cut bread from a plate, drinking three sips of soup from a bowl, and opening a right-handed door with lever handle. Each of these tasks was repeated three times. The arm was mounted on the participant's wheelchair, and the participants were free to move the arm as they wish to complete these tasks. Each task consisted of a sequence of modes where a mode is defined as arm movement in one DOF. Results show that participants used a total of 938 mode movements with an average of 75.5 (std 10.2) modes for the eating task, 70 (std 8.8) modes for the soup task, and 18.7 (std 4.5) modes for the door opening task. Tasks were then segmented into smaller subtasks. It was found that there are patterns of usage per participant and per subtask. These patterns can potentially allow a robot to learn from user's demonstration what is the task being executed and by whom and respond accordingly to reduce user effort.

Pneumovesicoscopic treatment of congenital bladder diverticula in children: our experience.

PubMed

Marte, Antonio; Sabatino, Maria D; Borrelli, Micaela; Del Balzo, Biago; Nino, Fabiano; Prezioso, Maurizio; Parmeggiani, Pio

2010-02-01

In this article, we report our experience with diverticulectomies of symptomatic congenital bladder diverticula in children, which was performed by utilizing pneumovesicoscopy. Six boys, 4-8 years of age (mean, 5.6) underwent pneumovesicoscopic diverticulectomy at our institution from June 2007 to June 2008. There were 4 right-single diverticula and 2 double-left diverticula. Under cystoscopic control, after the cystopexy to the abdominal wall, a midline 5-mm trocar for a 0-degree telescope and two lateral 3-mm reusable trocars through the anterolateral wall of the bladder in the midclavicular line were introduced, insufflating the bladder with carbondioxide to 10-12 mm Hg pressure. The diverticulum/a were inverted into the bladder and the mucosa around the neck was circumcized by using scissors and a monopolar hook. The defect was sutured with interrupted sutures and the bladder was drained with a Foley catheter, which was introduced at the site of the 5-mm port, and a urethral catheter. Mean operative time was 110 minutes. No major peri- or postoperative complications were recorded, except that the displacement of one of the lateral trocars that resulted in gas leakage in 1 case. The trocar was replaced and the procedure was completed. An ultrasound and a voiding cystourethrogram, performed from 3 to 6 months after the operation, showed the disappearance of the diverticulum/a. In our experience, pneumovesicoscopic diverticulectomy is an easy, safe procedure and can be considered a valid alternative to the open or laparoscopic procedures. It also provides no postoperative discomfort and a good cosmetic result.

A Design Architecture for an Integrated Training System Decision Support System

DTIC Science & Technology

1990-07-01

Sensory modes include visual, auditory, tactile, or kinesthetic; performance categories include time to complete , speed of response, or correct action ...procedures, and finally application and examples from the aviation proponency with emphasis on the LHX program. Appendix B is a complete bibliography...integrated analysis of ITS development. The approach was designed to provide an accurate and complete representation of the ITS development process and

First-year medical students prefer multiple learning styles.

PubMed

Lujan, Heidi L; DiCarlo, Stephen E

2006-03-01

Students have preferences for the ways in which they receive information. The visual, auditory, reading/writing, kinesthetic (VARK) questionnaire identifies student's preferences for particular modes of information presentation. We administered the VARK questionnaire to our first-year medical students, and 166 of 250 students (66%) returned the completed questionnaire. Only 36.1% of the students preferred a single mode of information presentation. Among these students, 5.4% preferred visual (learning from graphs, charts, and flow diagrams), 4.8% preferred auditory (learning from speech), 7.8% preferred printed words (learning from reading and writing), and 18.1% preferred using all their senses (kinesthetics: learning from touch, hearing, smell, taste, and sight). In contrast, most students (63.8%) preferred multiple modes [2 modes (24.5%), 3 modes (32.1%), or 4 modes (43.4%)] of information presentation. Knowing the students preferred modes can 1) help provide instruction tailored to the student's individual preference, 2) overcome the predisposition to treat all students in a similar way, and 3) motivate teachers to move from their preferred mode(s) to using others.

Cycles till failure of silver-zinc cells with completing failures modes: Preliminary data analysis

NASA Technical Reports Server (NTRS)

Sidik, S. M.; Leibecki, H. F.; Bozek, J. M.

1980-01-01

One hundred and twenty nine cells were run through charge-discharge cycles until failure. The experiment design was a variant of a central composite factorial in five factors. Preliminary data analysis consisted of response surface estimation of life. Batteries fail under two basic modes; a low voltage condition and an internal shorting condition. A competing failure modes analysis using maximum likelihood estimation for the extreme value life distribution was performed. Extensive diagnostics such as residual plotting and probability plotting were employed to verify data quality and choice of model.

Baby Skyrme model and fermionic zero modes

NASA Astrophysics Data System (ADS)

Queiruga, J. M.

2016-09-01

In this work we investigate some features of the fermionic sector of the supersymmetric version of the baby Skyrme model. We find that, in the background of Bogomol'nyi-Prasad-Sommerfield compact baby Skyrmions, fermionic zero modes are confined to the defect core. Further, we show that, while three Supersymmetry (SUSY) generators are broken in the defect core, SUSY is completely restored outside. We study also the effect of a D-term deformation of the model. Such a deformation allows for the existence of fermionic zero modes and broken SUSY outside the compact defect.

Stabilized single-longitudinal-mode erbium fibre laser employing silicon-micro-ring resonator and saturable absorber

NASA Astrophysics Data System (ADS)

Hsu, Yung; Yeh, Chien-Hung; Chow, Chi-Wai; Chang, Yuan-Chia; Cheng, Hao-Yun

2018-07-01

In the paper, a wavelength-tunable erbium-doped fiber (EDF) ring laser with stable single-longitudinal-mode (SLM) oscillation is proposed and investigated. Here, a silicon-micro-ring-resonator can be applied in a laser cavity for tuning wavelength in the C-band range. To complete the SLM oscillation, an unpumped EDF-based saturable absorber is used to act as ultra-narrowband filter for suppressing other oscillation modes. Additionally, the output stabilities of power and wavelength in the proposed EDF ring laser are also executed and discussed.

A NASTRAN primer for the analysis of rotating flexible blades

NASA Technical Reports Server (NTRS)

Lawrence, Charles; Aiello, Robert A.; Ernst, Michael A.; Mcgee, Oliver G.

1987-01-01

This primer provides documentation for using MSC NASTRAN in analyzing rotating flexible blades. The analysis of these blades includes geometrically nonlinear (large displacement) analysis under centrifugal loading, and frequency and mode shape (normal modes) determination. The geometrically nonlinear analysis using NASTRAN Solution sequence 64 is discussed along with the determination of frequencies and mode shapes using Solution Sequence 63. A sample problem with the complete NASTRAN input data is included. Items unique to rotating blade analyses, such as setting angle and centrifugal softening effects are emphasized.

Bend compensated large-mode-area fibers: achieving robust single-modedness with transformation optics.

PubMed

Fini, John M; Nicholson, Jeffrey W

2013-08-12

Fibers with symmetric bend compensated claddings are proposed, and demonstrate performance much better than conventional designs. These fibers can simultaneously achieve complete HOM suppression, negligible bend loss, and mode area >1000 square microns. The robust single-modedness of these fibers offers a path to overcoming mode instability limits on high-power amplifiers and lasers. The proposed designs achieve many of the advantages of our previous (asymmetric) bend compensation strategy in the regime of moderately large area, and are much easier to fabricate and utilize.

Preliminary assessment of combustion modes for internal combustion wave rotors

NASA Technical Reports Server (NTRS)

Nalim, M. Razi

1995-01-01

Combustion within the channels of a wave rotor is examined as a means of obtaining pressure gain during heat addition in a gas turbine engine. Several modes of combustion are considered and the factors that determine the applicability of three modes are evaluated in detail; premixed autoignition/detonation, premixed deflagration, and non-premixed compression ignition. The last two will require strong turbulence for completion of combustion in a reasonable time in the wave rotor. The compression/autoignition modes will require inlet temperatures in excess of 1500 R for reliable ignition with most hydrocarbon fuels; otherwise, a supplementary ignition method must be provided. Examples of combustion mode selection are presented for two core engine applications that had been previously designed with equivalent 4-port wave rotor topping cycles using external combustion.

Parametric vibrations of a mechanical system and their stability for an arbitrary modulation coefficient

NASA Astrophysics Data System (ADS)

Akulenko, L. D.; Nesterov, S. V.

2013-03-01

The natural frequencies and modes of parametric vibrations of a mechanical system are studied, by way of example, for a pendulum of variable length with modulation coefficient varying from arbitrarily small to maximum admissible values. Analytic and numerical methods are used to construct and study the boundaries of the resonance domains for the first four vibration modes, and the main qualitative properties of higher modes are found. The complete degeneration of modes with even numbers, i.e., the coincidence of the frequencies of symmetric and nonsymmetric naturalmodes for admissible values of the modulation parameter, is proved. The global picture of boundaries of stability domains for the lower equilibriumis constructed, and a significant difference from the Ince-Strutt diagram is shown. Specific properties of the natural modes are established.

Stingray Failure Mode, Effects and Criticality Analysis: WEC Risk Registers

DOE Data Explorer

Ken Rhinefrank

2016-07-25

Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficiently. The FMECA can begin once there is enough detail to functions and failure modes of a given system, and its interfaces with other systems. The FMECA occurs coincidently with the design process and is an iterative process which allows for design changes to overcome deficiencies in the analysis.Risk Registers for major subsystems completed according to the methodology described in "Failure Mode Effects and Criticality Analysis Risk Reduction Program Plan.pdf" document below, in compliance with the DOE Risk Management Framework developed by NREL.

Complete pulse characterization of quantum dot mode-locked lasers suitable for optical communication up to 160 Gbit/s.

PubMed

Schmeckebier, H; Fiol, G; Meuer, C; Arsenijević, D; Bimberg, D

2010-02-15

A complete characterization of pulse shape and phase of a 1.3 microm, monolithic-two-section, quantum-dot mode-locked laser (QD-MLL) at a repetition rate of 40 GHz is presented, based on frequency resolved optical gating. We show that the pulse broadening of the QD-MLL is caused by linear chirp for all values of current and voltage investigated here. The chirp increases with the current at the gain section, whereas larger bias at the absorber section leads to less chirp and therefore to shorter pulses. Pulse broadening is observed at very high bias, likely due to the quantum confined stark effect. Passive- and hybrid-QD-MLL pulses are directly compared. Improved pulse intensity profiles are found for hybrid mode locking. Via linear chirp compensation pulse widths down to 700 fs can be achieved independent of current and bias, resulting in a significantly increased overall mode-locking range of 101 MHz. The suitability of QD-MLL chirp compensated pulse combs for optical communication up to 160 Gbit/s using optical-time-division multiplexing are demonstrated by eye diagrams and autocorrelation measurements.

Crew Exploration Vehicle Ascent Abort Coverage Analysis

NASA Technical Reports Server (NTRS)

Abadie, Marc J.; Berndt, Jon S.; Burke, Laura M.; Falck, Robert D.; Gowan, John W., Jr.; Madsen, Jennifer M.

2007-01-01

An important element in the design of NASA's Crew Exploration Vehicle (CEV) is the consideration given to crew safety during various ascent phase failure scenarios. To help ensure crew safety during this critical and dynamic flight phase, the CEV requirements specify that an abort capability must be continuously available from lift-off through orbit insertion. To address this requirement, various CEV ascent abort modes are analyzed using 3-DOF (Degree Of Freedom) and 6-DOF simulations. The analysis involves an evaluation of the feasibility and survivability of each abort mode and an assessment of the abort mode coverage using the current baseline vehicle design. Factors such as abort system performance, crew load limits, thermal environments, crew recovery, and vehicle element disposal are investigated to determine if the current vehicle requirements are appropriate and achievable. Sensitivity studies and design trades are also completed so that more informed decisions can be made regarding the vehicle design. An overview of the CEV ascent abort modes is presented along with the driving requirements for abort scenarios. The results of the analysis completed as part of the requirements validation process are then discussed. Finally, the conclusions of the study are presented, and future analysis tasks are recommended.

Imaging via complete cantilever dynamic detection: General dynamic mode imaging and spectroscopy in scanning probe microscopy

DOE PAGES

Somnath, Suhas; Collins, Liam; Matheson, Michael A.; ...

2016-09-08

We develop and implement a multifrequency spectroscopy and spectroscopic imaging mode, referred to as general dynamic mode (GDM), that captures the complete spatially- and stimulus dependent information on nonlinear cantilever dynamics in scanning probe microscopy (SPM). GDM acquires the cantilever response including harmonics and mode mixing products across the entire broadband cantilever spectrum as a function of excitation frequency. GDM spectra substitute the classical measurements in SPM, e.g. amplitude and phase in lock-in detection. Here, GDM is used to investigate the response of a purely capacitively driven cantilever. We use information theory techniques to mine the data and verify themore » findings with governing equations and classical lock-in based approaches. We explore the dependence of the cantilever dynamics on the tip–sample distance, AC and DC driving bias. This approach can be applied to investigate the dynamic behavior of other systems within and beyond dynamic SPM. In conclusion, GDM is expected to be useful for separating the contribution of different physical phenomena in the cantilever response and understanding the role of cantilever dynamics in dynamic AFM techniques.« less

Stabilizing effect of resistivity towards ELM-free H-mode discharge in lithium-conditioned NSTX

NASA Astrophysics Data System (ADS)

Banerjee, Debabrata; Zhu, Ping; Maingi, Rajesh

2017-07-01

Linear stability analysis of the national spherical torus experiment (NSTX) Li-conditioned ELM-free H-mode equilibria is carried out in the context of the extended magneto-hydrodynamic (MHD) model in NIMROD. The purpose is to investigate the physical cause behind edge localized mode (ELM) suppression in experiment after the Li-coating of the divertor and the first wall of the NSTX tokamak. Besides ideal MHD modeling, including finite-Larmor radius effect and two-fluid Hall and electron diamagnetic drift contributions, a non-ideal resistivity model is employed, taking into account the increase of Z eff after Li-conditioning in ELM-free H-mode. Unlike an earlier conclusion from an eigenvalue code analysis of these equilibria, NIMROD results find that after reduced recycling from divertor plates, profile modification is necessary but insufficient to explain the mechanism behind complete ELMs suppression in ideal two-fluid MHD. After considering the higher plasma resistivity due to higher Z eff, the complete stabilization could be explained. A thorough analysis of both pre-lithium ELMy and with-lithium ELM-free cases using ideal and non-ideal MHD models is presented, after accurately including a vacuum-like cold halo region in NIMROD to investigate ELMs.

The two-mode multi-photon intensity-dependent Rabi model

NASA Astrophysics Data System (ADS)

Lo, C. F.

2014-06-01

We have investigated the energy eigen-spectrum of the two-mode k-photon intensity-dependent Rabi (IDR) model for k ≥ 2. Our analysis shows that the model does not have eigenstates in the Hilbert space spanned by the eigenstates of the two-mode k-photon intensity-dependent Jaynes-Cummings (IDJC) model, which is obtained by applying the rotating-wave approximation (RWA) to the two-mode k-photon IDR model. That is, the two-mode k-photon IDR model is ill-defined for k ≥ 2, and it is qualitatively different from the RWA counterpart which is valid for all values of k, implying that the counter-rotating term does drastically alter the nature of the RWA counterpart. Hence, the previous study of the effect of the counter-rotating term in the two-mode k-photon IDJC model via the time-dependent perturbation expansion is completely invalid.

Interference effects on guided Cherenkov emission in silicon from perpendicular, oblique, and parallel boundaries

NASA Astrophysics Data System (ADS)

Couillard, M.; Yurtsever, A.; Muller, D. A.

2010-05-01

Waveguide electromagnetic modes excited by swift electrons traversing Si slabs at normal and oblique incidence are analyzed using monochromated electron energy-loss spectroscopy and interpreted using a local dielectric theory that includes relativistic effects. At normal incidence, sharp spectral features in the visible/near-infrared optical domain are directly assigned to p -polarized modes. When the specimen is tilted, s -polarized modes, which are completely absent at normal incidence, become visible in the loss spectra. In the tilted configuration, the dispersion of p -polarized modes is also modified. For tilt angles higher than ˜50° , Cherenkov radiation, the phenomenon responsible for the excitation of waveguide modes, is expected to partially escape the silicon slab and the influence of this effect on experimental measurements is discussed. Finally, we find evidence for an interference effect at parallel Si/SiO2 interfaces, as well as a delocalized excitation of guided Cherenkov modes.

KSC-2014-3908

NASA Image and Video Library

2014-09-12

CAPE CANAVERAL, Fla. – Inside the Horizontal Integration Facility at Space Launch Complex 37 at Cape Canaveral Air Force Station in Florida, a United Launch Alliance technician on a scissor lift monitors the progress as the second stage of a Delta IV Heavy rocket is mated to the central core booster of the three booster stages for the unpiloted Exploration Flight Test-1, or EFT-1. During the mission, Orion will travel farther into space than any human spacecraft has gone in more than 40 years. The data gathered during the flight will influence design decisions, validate existing computer models and innovative new approaches to space systems development, as well as reduce overall mission risks and costs for later Orion flights. Liftoff of Orion on the first flight test is planned for December 2014. Photo credit: NASA/Daniel Casper

KSC-2014-3907

NASA Image and Video Library

2014-09-12

CAPE CANAVERAL, Fla. – Inside the Horizontal Integration Facility at Space Launch Complex 37 at Cape Canaveral Air Force Station in Florida, a United Launch Alliance technician on a scissor lift monitors the progress as the second stage of a Delta IV Heavy rocket is mated to the central core booster of the three booster stages for the unpiloted Exploration Flight Test-1, or EFT-1. During the mission, Orion will travel farther into space than any human spacecraft has gone in more than 40 years. The data gathered during the flight will influence design decisions, validate existing computer models and innovative new approaches to space systems development, as well as reduce overall mission risks and costs for later Orion flights. Liftoff of Orion on the first flight test is planned for December 2014. Photo credit: NASA/Daniel Casper

Slicing of silicon into sheet material. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

NASA Technical Reports Server (NTRS)

Holden, S. C.; Fleming, J. R.

1978-01-01

Fabrication of a prototype large capacity multiple blade slurry saw is considered. Design of the bladehead which will tension up to 1000 blades, and cut a 45 cm long silicon ingot as large as 12 cm in diameter is given. The large blade tensioning force of 270,000 kg is applied through two bolts acting on a pair of scissor toggles, significantly reducing operator set-up time. Tests with an upside-down cutting technique resulted in 100% wafering yields and the highest wafer accuracy yet experienced with MS slicing. Variations in oil and abrasives resulted only in degraded slicing results. A technique of continuous abrasive slurry separation to remove silicon debris is described.

Fourier decomposition of payoff matrix for symmetric three-strategy games.

PubMed

Szabó, György; Bodó, Kinga S; Allen, Benjamin; Nowak, Martin A

2014-10-01

In spatial evolutionary games the payoff matrices are used to describe pair interactions among neighboring players located on a lattice. Now we introduce a way how the payoff matrices can be built up as a sum of payoff components reflecting basic symmetries. For the two-strategy games this decomposition reproduces interactions characteristic to the Ising model. For the three-strategy symmetric games the Fourier components can be classified into four types representing games with self-dependent and cross-dependent payoffs, variants of three-strategy coordinations, and the rock-scissors-paper (RSP) game. In the absence of the RSP component the game is a potential game. The resultant potential matrix has been evaluated. The general features of these systems are analyzed when the game is expressed by the linear combinations of these components.

Manipulation of cells with laser microbeam scissors and optical tweezers: a review

NASA Astrophysics Data System (ADS)

Greulich, Karl Otto

2017-02-01

The use of laser microbeams and optical tweezers in a wide field of biological applications from genomic to immunology is discussed. Microperforation is used to introduce a well-defined amount of molecules into cells for genetic engineering and optical imaging. The microwelding of two cells induced by a laser microbeam combines their genetic outfit. Microdissection allows specific regions of genomes to be isolated from a whole set of chromosomes. Handling the cells with optical tweezers supports investigation on the attack of immune systems against diseased or cancerous cells. With the help of laser microbeams, heart infarction can be simulated, and optical tweezers support studies on the heartbeat. Finally, laser microbeams are used to induce DNA damage in living cells for studies on cancer and ageing.

CoMIC, the hidden dynamics of mitochondrial inner compartments

PubMed Central

Cho, Bongki; Sun, Woong

2017-01-01

Mitochondria have evolutionarily, functionally and structurally distinct outer- (OMM) and inner-membranes (IMM). Thus, mitochondrial morphology is controlled by independent but coordinated activity of fission and fusion of the OMM and IMM. Constriction and division of the OMM are mediated by endocytosis-like machineries, which include dynamin-related protein 1 with additional cytosolic vesicle scissoring machineries such as actin filament and Dynamin 2. However, structural alteration of the IMM during mitochondrial division has been poorly understood. Recently, we found that the IMM and the inner compartments undergo transient and reversible constriction prior to the OMM division, which we termed CoMIC, Constriction of Mitochondrial Inner Compartment. In this short review, we further discuss the evolutionary perspective and the regulatory mechanism of CoMIC during mitochondrial division. PMID:28803609

CoMIC, the hidden dynamics of mitochondrial inner compartments.

PubMed

Cho, Bongki; Sun, Woong

2017-12-01

Mitochondria have evolutionarily, functionally and structurally distinct outer- (OMM) and inner-membranes (IMM). Thus, mitochondrial morphology is controlled by independent but coordinated activity of fission and fusion of the OMM and IMM. Constriction and division of the OMM are mediated by endocytosis-like machineries, which include dynamin-related protein 1 with additional cytosolic vesicle scissoring machineries such as actin filament and Dynamin 2. However, structural alteration of the IMM during mitochondrial division has been poorly understood. Recently, we found that the IMM and the inner compartments undergo transient and reversible constriction prior to the OMM division, which we termed CoMIC, Constriction of Mitochondrial Inner Compartment. In this short review, we further discuss the evolutionary perspective and the regulatory mechanism of CoMIC during mitochondrial division. [BMB Reports 2017; 50(12): 597-598].

Effect of swarming on biodiversity in non-symmetric rock-paper-scissor game.

PubMed

Bose, R

2010-05-01

Cyclic dominance of species is a potential mechanism for maintaining biodiversity. The author investigates the generalised scenario when the cyclic dominance of three or more interacting species is described by a non-symmetric matrix game that has multiple Nash equilibria. Modified Lotka-Volterra equations are proposed to incorporate the effects of swarming, and the condition for biodiversity is derived. The species are modelled using replicator equations, where each member of the species is assigned a fitness value. The authors show, for the first time, that the 'swarming effect' has an important role to play in the maintenance of biodiversity. The authors have also discovered the existence of a critical value of the swarming parameter for a given mobility, above which there is a high probability of existence of biodiversity.

An advanced actuator for high-performance slewing

NASA Technical Reports Server (NTRS)

Downer, James; Eisenhaure, David; Hockney, Richard

1988-01-01

A conceptual design for an advanced momentum exchange actuator for application to spacecraft slewing is described. The particular concept is a magnetically-suspended, magnetically gimballed Control Moment Gyro (CMG). A scissored pair of these devices is sized to provide the torque and angular momentum capacity required to reorient a large spacecraft through large angle maneuvers. The concept described utilizes a composite material rotor to achieve the high momentum and energy densities to minimize system mass, an advanced superconducting magnetic suspension system to minimize system weight and power consumption. The magnetic suspension system is also capable of allowing for large angle gimballing of the rotor, thus eliminating the mass and reliability penalties attendant to conventional gimbals. Descriptions of the various subelement designs are included along with the necessary system sizing formulation and material.

Random sampling of elementary flux modes in large-scale metabolic networks.

PubMed

Machado, Daniel; Soons, Zita; Patil, Kiran Raosaheb; Ferreira, Eugénio C; Rocha, Isabel

2012-09-15

The description of a metabolic network in terms of elementary (flux) modes (EMs) provides an important framework for metabolic pathway analysis. However, their application to large networks has been hampered by the combinatorial explosion in the number of modes. In this work, we develop a method for generating random samples of EMs without computing the whole set. Our algorithm is an adaptation of the canonical basis approach, where we add an additional filtering step which, at each iteration, selects a random subset of the new combinations of modes. In order to obtain an unbiased sample, all candidates are assigned the same probability of getting selected. This approach avoids the exponential growth of the number of modes during computation, thus generating a random sample of the complete set of EMs within reasonable time. We generated samples of different sizes for a metabolic network of Escherichia coli, and observed that they preserve several properties of the full EM set. It is also shown that EM sampling can be used for rational strain design. A well distributed sample, that is representative of the complete set of EMs, should be suitable to most EM-based methods for analysis and optimization of metabolic networks. Source code for a cross-platform implementation in Python is freely available at http://code.google.com/p/emsampler. dmachado@deb.uminho.pt Supplementary data are available at Bioinformatics online.

Reconstruction of the esophagojejunostomy by double stapling method using EEA™ OrVil™ in laparoscopic total gastrectomy and proximal gastrectomy

PubMed Central

2011-01-01

Here we report the method of anastomosis based on double stapling technique (hereinafter, DST) using a trans-oral anvil delivery system (EEATM OrVilTM) for reconstructing the esophagus and lifted jejunum following laparoscopic total gastrectomy or proximal gastric resection. As a basic technique, laparoscopic total gastrectomy employed Roux-en-Y reconstruction, laparoscopic proximal gastrectomy employed double tract reconstruction, and end-to-side anastomosis was used for the cut-off stump of the esophagus and lifted jejunum. We used EEATM OrVilTM as a device that permitted mechanical purse-string suture similarly to conventional EEA, and endo-Surgitie. After the gastric lymph node dissection, the esophagus was cut off using an automated stapler. EEATM OrVilTM was orally and slowly inserted from the valve tip, and a small hole was created at the tip of the obliquely cut-off stump with scissors to let the valve tip pass through. Yarn was cut to disconnect the anvil from a tube and the anvil head was retained in the esophagus. The end-Surgitie was inserted at the right subcostal margin, and after the looped-shaped thread was wrapped around the esophageal stump opening, assisting Maryland forceps inserted at the left subcostal and left abdomen were used to grasp the left and right esophageal stump. The surgeon inserted anvil grasping forceps into the right abdomen, and after grasping the esophagus with the forceps, tightened the end Surgitie, thereby completing the purse-string suture on the esophageal stump. The main unit of the automated stapler was inserted from the cut-off stump of the lifted jejunum, and a trocar was made to pass through. To prevent dropout of the small intestines from the automated stapler, the automated stapler and the lifted jejunum were fastened with silk thread, the abdomen was again inflated, and the lifted jejunum was led into the abdominal cavity. When it was confirmed that the automated stapler and center rod were made completely linear, the anvil and the main unit were connected with each other and firing was carried out. Then, DST-based anastomosis was completed with no dog-ear. The method may facilitate safe laparoscopic anastomosis between the esophagus and reconstructed intestine. This is also considered to serve as a useful anastomosis technique for upper levels of the esophagus in laparotomy. PMID:21599911

Electromagnetic coherence theory of laser resonator modes.

PubMed

Saastamoinen, Toni; Turunen, Jari; Tervo, Jani; Setälä, Tero; Friberg, Ari T

2005-01-01

A theory of open laser resonators is formulated within the framework of the electromagnetic coherence theory. It is shown that if only one Fox-Li mode contributes to the field at a given frequency, then the field at that frequency is necessarily completely coherent in view of the space-frequency counterpart of the recently introduced degree of coherence of electromagnetic fields [Opt. Express 11, 1137 (2003)]. It is also shown that the relation between the number of Fox-Li modes and the new degree of coherence is analogous to the relation established in the scalar theory of laser resonator modes. Difficulties that arise with the formerly introduced visibility-based definition of the electromagnetic degree of coherence are briefly discussed.

A simulation model for probabilistic analysis of Space Shuttle abort modes

NASA Technical Reports Server (NTRS)

Hage, R. T.

1993-01-01

A simulation model which was developed to provide a probabilistic analysis tool to study the various space transportation system abort mode situations is presented. The simulation model is based on Monte Carlo simulation of an event-tree diagram which accounts for events during the space transportation system's ascent and its abort modes. The simulation model considers just the propulsion elements of the shuttle system (i.e., external tank, main engines, and solid boosters). The model was developed to provide a better understanding of the probability of occurrence and successful completion of abort modes during the vehicle's ascent. The results of the simulation runs discussed are for demonstration purposes only, they are not official NASA probability estimates.

Rock Fracture Toughness Study Under Mixed Mode I/III Loading

NASA Astrophysics Data System (ADS)

Aliha, M. R. M.; Bahmani, A.

2017-07-01

Fracture growth in underground rock structures occurs under complex stress states, which typically include the in- and out-of-plane sliding deformation of jointed rock masses before catastrophic failure. However, the lack of a comprehensive theoretical and experimental fracture toughness study for rocks under contributions of out-of plane deformations (i.e. mode III) is one of the shortcomings of this field. Therefore, in this research the mixed mode I/III fracture toughness of a typical rock material is investigated experimentally by means of a novel cracked disc specimen subjected to bend loading. It was shown that the specimen can provide full combinations of modes I and III and consequently a complete set of mixed mode I/III fracture toughness data were determined for the tested marble rock. By moving from pure mode I towards pure mode III, fracture load was increased; however, the corresponding fracture toughness value became smaller. The obtained experimental fracture toughness results were finally predicted using theoretical and empirical fracture models.

Seismic transmission operator reciprocity - II: impedance-operator symmetry via elastic lateral modes

NASA Astrophysics Data System (ADS)

Thomson, C. J.

2015-08-01

The properties of the overburden transmission response are of particular interest for the analysis of reflectivity illumination or blurring in seismic depth imaging. The first step to showing a transmission-operator reciprocity property is to identify the symmetry of the so-called displacement-to-traction operators. The latter are analogous to Dirichlet-to-Neumann operators and they may also be called impedance operators. Their symmetry is deduced here after development of a formal spectral or modal theory of lateral wavefunctions in a laterally heterogeneous generally anisotropic elastic medium. The elastic lateral modes are displacement-traction 6-vectors and they are built from two auxiliary 3-vector lateral-mode bases. These auxiliary modes arise from Hermitian and anti-Hermitian operators, so they have familiar properties such as orthogonality. There is no assumption of down/up symmetry of the elasticity tensor, but basic assumptions are made about the existence and completeness of the elastic modes. A point-symmetry property appears and plays a central role. The 6-vector elastic modes have a symplectic orthogonality property, which facilitates the development of modal expansions for 6-vector functions of the lateral coordinates when completeness is assumed. While the elastic modal theory is consistent with the laterally homogeneous case, numerical work would provide confidence that it is correct in general. An appendix contains an introductory overview of acoustic lateral modes that were studied by other authors, given from the perspective of this new work. A distinction is drawn between unit normalization of scalar auxiliary modes and a separate energy-flux normalization of 2-vector acoustic modes. Neither is crucial to the form of acoustic pressure-to-velocity or impedance operators. This statement carries over to the elastic case for the 3-vector auxiliary- and 6-vector elastic-mode normalizations. The modal theory is used to construct the kernel of the elastic displacement-to-traction or impedance operator. Symmetry properties of this operator are then deduced, which is the main goal of this paper. The implications of elastic impedance-operator symmetry and the symplectic property for the transmission and reflection responses of finite regions are described in a companion paper.

New type of synchronization of oscillators with hard excitation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovaleva, M. A., E-mail: margo.kovaleva@gmail.com; Manevich, L. I., E-mail: manevichleonid3@gmail.com; Pilipchuk, V. N.

2013-08-15

It is shown that stable limiting cycles corresponding to nonlinear beats with complete energy exchange between oscillators can exist in a system of two weakly coupled active oscillators (generators). The oscillatory regime of this type, which implements a new type of synchronization in an active system, is an alternative to the well-studied synchronization in a regime close to a nonlinear normal mode. In this case, the ranges of dissipative parameters corresponding to different types of synchronization do not intersect. The analytic description of attractors revealed in analysis is based on the concept of limiting phase trajectories, which was developed earliermore » by one of the authors for conservative systems. A transition (in the parametric space) from the complete energy exchange between oscillators to predominant localization of energy in one of the oscillators can be naturally described using this concept. The localized normal mode is an attractor in the range of parameters in which neither the limiting phase trajectory nor any of the collective normal modes is an attractor.« less

Evaluating Flight Crew Operator Manual Documentation

NASA Technical Reports Server (NTRS)

Sherry, Lance; Feary, Michael

1998-01-01

Aviation and cognitive science researchers have identified situations in which the pilot s expectations for the behavior of the avionics are not matched by the actual behavior of the avionics. Researchers have attributed these "automation surprises" to the complexity of the avionics mode logic, the absence of complete training, limitations in cockpit displays, and ad-hoc conceptual models of the avionics. Complete canonical rule-based descriptions of the behavior of the autopilot provide the basis for understanding the perceived complexity of the autopilots, the differences between the pilot s and autopilot s conceptual models, and the limitations in training materials and cockpit displays. This paper compares the behavior of the autopilot Vertical Speed/Flight Path Angle (VS-FPA) mode as described in the Flight Crew Operators Manual (FCOM) and the actual behavior of the VS-FPA mode defined in the autopilot software. This example demonstrates the use of the Operational Procedure Model (OPM) as a method for using the requirements specification for the design of the software logic as information requirements for training.

Direct Numerical Simulation of Transition Due to Traveling Crossflow Vortices

NASA Technical Reports Server (NTRS)

Li, Fei; Choudhari, Meelan M.; Duan, Lian

2016-01-01

Previous simulations of laminar breakdown mechanisms associated with stationary crossflow instability over a realistic swept-wing configuration are extended to investigate the alternate scenario of transition due to secondary instability of traveling crossflow modes. Earlier analyses based on secondary instability theory and parabolized stability equations have shown that this alternate scenario is viable when the initial amplitude of the most amplified mode of the traveling crossflow instability is greater than approximately 0.03 times the initial amplitude of the most amplified stationary mode. The linear growth predictions based on the secondary instability theory and parabolized stability equations agree well with the direct numerical simulation. Nonlinear effects are initially stabilizing but subsequently lead to a rapid growth followed by the onset of transition when the amplitude of the secondary disturbance exceeds a threshold value. Similar to the breakdown of stationary vortices, the transition zone is rather short and the boundary layer becomes completely turbulent across a distance of less than 15 times the boundary layer thickness at the completion of transition.

Data quality assurance: an analysis of patient non-response.

PubMed

Derby, Dustin C; Haan, Andrea; Wood, Kurt

2011-01-01

Patient satisfaction is paramount to maintaining high clinical quality assurance. This study seeks to compare response rates, response bias, and the completeness of data between paper and electronic collection modes of a chiropractic patient satisfaction survey. A convenience sample of 206 patients presenting to a chiropractic college clinic were surveyed concerning satisfaction with their chiropractic care. Paper (in-clinic and postal) and electronic modes of survey administration were compared for response rates and non-response bias. The online data collection mode resulted in fewer non-responses and a higher response rate, and did not evince response bias when compared to paper modes. The postal paper mode predicted non-response rates over the in-clinic paper and online modalities and exhibited a gender bias. This current study was a single clinic study; future studies should consider multi-clinic data collections. Busy clinic operations and available staff resources restricted the ability to conduct a random sampling of patients or to invite all eligible patients, therefore limiting the generalizability of collected survey data. Results of this study will provide data to aid development of survey protocols that efficiently, account for available human resources, and are convenient for patients while allowing for the most complete and accurate data collection possible in an educational clinic setting. Understanding patient responses across survey modes is critical for the cultivation of quality business intelligence within college teaching clinic settings. This study bridges measurement evidence from three popular data collection modalities and offers support for higher levels of quality for web-based data collection.

The Impact on ADA Associated with Entering the Lock-Out Mode of a Computerized Prerequisite Checking System. Institutional Research Report Number 72.

ERIC Educational Resources Information Center

Kangas, Jon Alan

When a discipline enters the lock-out mode in the San Jose/Evergreen Community College District, the computer prevents a student from registering in any course in that discipline unless he/she has completed all prerequisites for that course. To determine how this registration process affected enrollments, average daily attendance (ADA) figures…

Soldier Performance in a Moving Command Vehicle Under Manned, Teleoperated, and Teleoperated Cruise Control Modes Under Day and Night Conditions

DTIC Science & Technology

2013-05-01

official Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does not... designed to examine these modes of operation, comparing the subjective workload, stress, and motion sickness as well as course completion time...8  3.5  Design and Analysis ........................................................................................................9

Introduction to Toxicity and Risk Assessment for Project Chemists

DTIC Science & Technology

2012-03-27

Toxicity of Hexavalent Chromium  External review complete  EPA will wait until studies underway on carcinogenic mode of action are complete to...finalize the assessment  NJ and Cal values for hex chrome 16 Risk-Based Screening Levels Resident Soil (mg/kg) Resident Water Use (µg/L) DRAFT 0.04

Frequency dependence 3.0: an attempt at codifying the evolutionary ecology perspective.

PubMed

Metz, Johan A J; Geritz, Stefan A H

2016-03-01

The fitness concept and perforce the definition of frequency independent fitnesses from population genetics is closely tied to discrete time population models with non-overlapping generations. Evolutionary ecologists generally focus on trait evolution through repeated mutant substitutions in populations with complicated life histories. This goes with using the per capita invasion speed of mutants as their fitness. In this paper we develop a concept of frequency independence that attempts to capture the practical use of the term by ecologists, which although inspired by population genetics rarely fits its strict definition. We propose to call the invasion fitnesses of an eco-evolutionary model frequency independent when the phenotypes can be ranked by competitive strength, measured by who can invade whom. This is equivalent to the absence of weak priority effects, protected dimorphisms and rock-scissor-paper configurations. Our concept differs from that of Heino et al. (TREE 13:367-370, 1998) in that it is based only on the signs of the invasion fitnesses, whereas Heino et al. based their definitions on the structure of the feedback environment, summarising the effect of all direct and indirect interactions between individuals on fitness. As it turns out, according to our new definition an eco-evolutionary model has frequency independent fitnesses if and only if the effect of the feedback environment on the fitness signs can be summarised by a single scalar with monotonic effect. This may be compared with Heino et al.'s concept of trivial frequency dependence defined by the environmental feedback influencing fitness, and not just its sign, in a scalar manner, without any monotonicity restriction. As it turns out, absence of the latter restriction leaves room for rock-scissor-paper configurations. Since in 'realistic' (as opposed to toy) models frequency independence is exceedingly rare, we also define a concept of weak frequency dependence, which can be interpreted intuitively as almost frequency independence, and analyse in which sense and to what extent the restrictions on the potential model outcomes of the frequency independent case stay intact for models with weak frequency dependence.

Observation of localized ground and excited orbitals in graphene photonic ribbons

NASA Astrophysics Data System (ADS)

Cantillano, C.; Mukherjee, S.; Morales-Inostroza, L.; Real, B.; Cáceres-Aravena, G.; Hermann-Avigliano, C.; Thomson, R. R.; Vicencio, R. A.

2018-03-01

We report on the experimental realization of a quasi-one-dimensional photonic graphene ribbon supporting four flat-bands (FBs). We study the dynamics of fundamental and dipolar modes, which are analogous to the s and p orbitals, respectively. In the experiment, both modes (orbitals) are effectively decoupled from each other, implying two sets of six bands, where two of them are completely flat (dispersionless). Using an image generator setup, we excite the s and p FB modes and demonstrate their non-diffracting propagation for the first time. Our results open an exciting route towards photonic emulation of higher orbital dynamics.

Aerodynamic heating in transitional hypersonic boundary layers: Role of second-mode instability

NASA Astrophysics Data System (ADS)

Zhu, Yiding; Chen, Xi; Wu, Jiezhi; Chen, Shiyi; Lee, Cunbiao; Gad-el-Hak, Mohamed

2018-01-01

The evolution of second-mode instabilities in hypersonic boundary layers and its effects on aerodynamic heating are investigated. Experiments are conducted in a Mach 6 wind tunnel using fast-response pressure sensors, fluorescent temperature-sensitive paint, and particle image velocimetry. Calculations based on parabolic stability equations and direct numerical simulations are also performed. It is found that second-mode waves, accompanied by high-frequency alternating fluid compression and expansion, produce intense aerodynamic heating in a small region that rapidly heats the fluid passing through it. As the second-mode waves decay downstream, the dilatation-induced aerodynamic heating decreases while its shear-induced counterpart keeps growing. The latter brings about a second growth of the surface temperature when transition is completed.

Investigating light curve modulation via kernel smoothing. II. New additional modes in single-mode OGLE classical Cepheids

NASA Astrophysics Data System (ADS)

Süveges, Maria; Anderson, Richard I.

2018-04-01

Detailed knowledge of the variability of classical Cepheids, in particular their modulations and mode composition, provides crucial insight into stellar structure and pulsation. However, tiny modulations of the dominant radial-mode pulsation were recently found to be very frequent, possibly ubiquitous in Cepheids, which makes secondary modes difficult to detect and analyse, since these modulations can easily mask the potentially weak secondary modes. The aim of this study is to re-investigate the secondary mode content in the sample of OGLE-III and -IV single-mode classical Cepheids using kernel regression with adaptive kernel width for pre-whitening, instead of using a constant-parameter model. This leads to a more precise removal of the modulated dominant pulsation, and enables a more complete survey of secondary modes with frequencies outside a narrow range around the primary. Our analysis reveals that significant secondary modes occur more frequently among first overtone Cepheids than previously thought. The mode composition appears significantly different in the Large and Small Magellanic Clouds, suggesting a possible dependence on chemical composition. In addition to the formerly identified non-radial mode at P2 ≈ 0.6…0.65P1 (0.62-mode), and a cluster of modes with near-primary frequency, we find two more candidate non-radial modes. One is a numerous group of secondary modes with P2 ≈ 1.25P1, which may represent the fundamental of the 0.62-mode, supposed to be the first harmonic of an l ∈ {7, 8, 9} non-radial mode. The other new mode is at P2 ≈ 1.46P1, possibly analogous to a similar, rare mode recently discovered among first overtone RR Lyrae stars.

Ideal-Magnetohydrodynamic-Stable Tilting in Field-Reversed Configurations

NASA Astrophysics Data System (ADS)

Kanno, Ryutaro; Ishida, Akio; Steinhauer, Loren

1995-02-01

The tilting mode in field-reversed configurations (FRC) is examined using ideal-magnetohydrodynamic stability theory. Tilting, a global mode, is the greatest threat for disruption of FRC confinement. Previous studies uniformly found tilting to be unstable in ideal theory: the objective here is to ascertain if stable equilibria were overlooked in past work. Solving the variational problem with the Rayleigh-Ritz technique, tilting-stable equilibria are found for sufficiently hollow current profile and sufficient racetrackness of the separatrix shape. Although these equilibria were not examined previously, the present conclusion is quite surprising. Consequently checks of the method are offered. Even so it cannot yet be claimed with complete certainty that stability has been proved: absolute confirmation of ideal-stable tilting awaits the application of more complete methods.

Crystal structures and high-temperature phase-transitions in SrNdMRuO{sub 6} (M=Zn,Co,Mg,Ni) new double perovskites studied by symmetry-mode analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iturbe-Zabalo, E., E-mail: iturbe@ill.fr; Fisika Aplikatua II Saila, Zientzia eta Teknologia Fakultatea, UPV/EHU, P.O. Box 644, 48080 Bilbao; Igartua, J.M.

2013-02-15

Crystal structures of SrNdZnRuO{sub 6}, SrNdCoRuO{sub 6}, SrNdMgRuO{sub 6} and SrNdNiRuO{sub 6} double perovskites have been studied by X-ray, synchrotron radiation and neutron powder diffraction method, at different temperatures, and using the symmetry-mode analysis. All compounds adopt the monoclinic space group P2{sub 1}/n at room-temperature, and contain a completely ordered array of the tilted MO{sub 6} and RuO{sub 6} octahedra, whereas Sr/Nd cations are completely disordered. The analysis of the structures in terms of symmetry-adapted modes of the parent phase allows the identification of the modes responsible for the phase-transition. The high-temperature study (300-1250 K) has shown that the compoundsmore » present a temperature induced structural phase-transition: P2{sub 1}/n{yields}P4{sub 2}/n{yields}Fm3{sup Macron }m. - Graphical abstract: Representation of the dominant distortion modes of the symmetry mode decomposition of the room-temperature (P2{sub 1}/n), intermediate (P4{sub 2}/n) and cubic (Fm-3m) phase SrNdMRuO{sub 6} (M=Zn,Co,Mg,Ni), with respect to the parent phase Fm-3m. The dominant distortion modes are: in the monoclinic phase-GM{sub 4}{sup +} (blue arrow), X{sub 3}{sup +} (green arrow) and X{sub 5}{sup +} acting on A-site cations (red arrow); in the tetragonal phase-GM{sub 4}{sup +} (pink arrow), X{sub 3}{sup +} (light blue arrow) and X{sub 5}{sup +} acting on A-site cations (brown arrow). Highlights: Black-Right-Pointing-Pointer Structural study of four ruthenate double perovskites. Black-Right-Pointing-Pointer Room-temperature structural determination using symmetry-mode procedure. Black-Right-Pointing-Pointer Determination of temperature induced structural phase-transitions. Black-Right-Pointing-Pointer Symmetry adapted-mode analysis.« less

Precise Stabilization of the Optical Frequency of WGMRs

NASA Technical Reports Server (NTRS)

Savchenkov, Anatoliy; Matsko, Andrey; Matsko, Andrey; Yu, Nan; Maleki, Lute; Iltchenko, Vladimir

2009-01-01

Crystalline whispering gallery mode resonators (CWGMRs) made of crystals with axial symmetry have ordinary and extraordinary families of optical modes. These modes have substantially different thermo-refractive constants. This results in a very sharp dependence of differential detuning of optical frequency on effective temperature. This frequency difference compared with clock gives an error signal for precise compensation of the random fluctuations of optical frequency. Certain crystals, like MgF2, have turnover points where the thermo-refractive effect is completely nullified. An advantage for applications using WGMRs for frequency stabilization is in the possibility of manufacturing resonators out of practically any optically transparent crystal. It is known that there are crystals with negative and zero thermal expansion at some specific temperatures. Doping changes properties of the crystals and it is possible to create an optically transparent crystal with zero thermal expansion at room temperature. With this innovation s stabilization technique, the resultant WGMR will have absolute frequency stability The expansion of the resonator s body can be completely compensated for by nonlinear elements. This results in compensation of linear thermal expansion (see figure). In three-mode, the MgF2 resonator, if tuned at the turnover thermal point, can compensate for all types of random thermal-related frequency drift. Simplified dual-mode method is also available. This creates miniature optical resonators with good short- and long-term stability for passive secondary frequency ethalon and an active resonator for active secondary frequency standard (a narrowband laser with long-term stability).

The role of aggression-related early maladaptive schemas and schema modes in aggression in a prisoner sample.

PubMed

Dunne, Ashley L; Gilbert, Flora; Lee, Stuart; Daffern, Michael

2018-05-01

Contemporary social-cognitive aggression theory and extant empirical research highlights the relationship between certain Early Maladaptive Schemas (EMSs) and aggression in offenders. To date, the related construct of schema modes, which presents a comprehensive and integrated schema unit, has received scant empirical attention. Furthermore, EMSs and schema modes have yet to be examined concurrently with respect to aggressive behavior. This study examined associations between EMSs, schema modes, and aggression in an offender sample. Two hundred and eight adult male prisoners completed self-report psychological tests measuring their histories of aggression, EMSs, and schema modes. Regression analyses revealed that EMSs were significantly associated with aggression but did not account for a unique portion of variance once the effects of schema modes were taken into account. Three schema modes, Enraged Child, Impulsive Child, and Bully and Attack, significantly predicted aggression. These findings support the proposition that schema modes characterized by escalating states of anger, rage, and impulsivity characterize aggressive offenders. In this regard, we call attention to the need to include schema modes in contemporary social-cognitive aggression theories, and suggest that systematic assessment and treatment of schema modes has the potential to enhance outcomes with violent offenders. © 2018 Wiley Periodicals, Inc.

DART AVGS Performance

NASA Technical Reports Server (NTRS)

Howard, Richard T.; Bryan, Thomas C.

2007-01-01

The Advanced Video Guidance Sensor (AVGS) was designed to be the proximity operations sensor for the Demonstration of Autonomous Rendezvous Technologies (DART). The DART mission flew in April of2005 and was a partial success. The AVGS did not get the opportunity to operate in every mode in orbit, but those modes in which it did operate were completely successful. This paper will detail the development, testing, and on-orbit performance of the AVGS.

Finite-mode analysis by means of intensity information in fractional optical systems.

PubMed

Alieva, Tatiana; Bastiaans, Martin J

2002-03-01

It is shown how a coherent optical signal that contains only a finite number of Hermite-Gauss modes can be reconstructed from the knowledge of its Radon-Wigner transform-associated with the intensity distribution in a fractional-Fourier-transform optical system-at only two transversal points. The proposed method can be generalized to any fractional system whose generator transform has a complete orthogonal set of eigenfunctions.

Completely monolithic linearly polarized high-power fiber laser oscillator

NASA Astrophysics Data System (ADS)

Belke, Steffen; Becker, Frank; Neumann, Benjamin; Ruppik, Stefan; Hefter, Ulrich

2014-03-01

We have demonstrated a linearly polarized cw all-in-fiber oscillator providing 1 kW of output power and a polarization extinction ratio (PER) of up to 21.7 dB. The design of the laser oscillator is simple and consists of an Ytterbium-doped polarization maintaining large mode area (PLMA) fiber and suitable fiber Bragg gratings (FBG) in matching PLMA fibers. The oscillator has nearly diffraction-limited beam quality (M² < 1.2). Pump power is delivered via a high power 6+1:1 pump coupler. The slope efficiency of the laser is 75 %. The electro/optical efficiency of the complete laser system is ~30 % and hence in the range of Rofin's cw non-polarized fiber lasers. Choosing an adequate bending diameter for the Yb-doped PLMA fiber, one polarization mode as well as higher order modes are sufficiently supressed1. Resulting in a compact and robust linearly polarized high power single mode laser without external polarizing components. Linearly polarized lasers are well established for one dimensional cutting or welding applications. Using beam shaping optics radially polarized laser light can be generated to be independent from the angle of incident to the processing surface. Furthermore, high power linearly polarized laser light is fundamental for nonlinear frequency conversion of nonlinear materials.

Stabilizing effect of resistivity towards ELM-free H-mode discharge in lithium-conditioned NSTX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banerjee, Debabrata; Zhu, Ping; Maingi, Rajesh

Linear stability analysis of the national spherical torus experiment (NSTX) Li-conditioned ELM-free H-mode equilibria is carried out in the context of the extended magneto-hydrodynamic (MHD) model in NIMROD. Our purpose is to investigate the physical cause behind edge localized mode (ELM) suppression in experiment after the Li-coating of the divertor and the first wall of the NSTX tokamak. Besides ideal MHD modeling, including finite-Larmor radius effect and two-fluid Hall and electron diamagnetic drift contributions, a non-ideal resistivity model is employed, taking into account the increase of Z eff after Li-conditioning in ELM-free H-mode. And unlike an earlier conclusion from anmore » eigenvalue code analysis of these equilibria, NIMROD results find that after reduced recycling from divertor plates, profile modification is necessary but insufficient to explain the mechanism behind complete ELMs suppression in ideal two-fluid MHD. After considering the higher plasma resistivity due to higher Z eff, the complete stabilization could be explained. Furthermore, a thorough analysis of both pre-lithium ELMy and with-lithium ELM-free cases using ideal and non-ideal MHD models is presented, after accurately including a vacuum-like cold halo region in NIMROD to investigate ELMs.« less

Stabilizing effect of resistivity towards ELM-free H-mode discharge in lithium-conditioned NSTX

DOE PAGES

Banerjee, Debabrata; Zhu, Ping; Maingi, Rajesh

2017-05-12

Linear stability analysis of the national spherical torus experiment (NSTX) Li-conditioned ELM-free H-mode equilibria is carried out in the context of the extended magneto-hydrodynamic (MHD) model in NIMROD. Our purpose is to investigate the physical cause behind edge localized mode (ELM) suppression in experiment after the Li-coating of the divertor and the first wall of the NSTX tokamak. Besides ideal MHD modeling, including finite-Larmor radius effect and two-fluid Hall and electron diamagnetic drift contributions, a non-ideal resistivity model is employed, taking into account the increase of Z eff after Li-conditioning in ELM-free H-mode. And unlike an earlier conclusion from anmore » eigenvalue code analysis of these equilibria, NIMROD results find that after reduced recycling from divertor plates, profile modification is necessary but insufficient to explain the mechanism behind complete ELMs suppression in ideal two-fluid MHD. After considering the higher plasma resistivity due to higher Z eff, the complete stabilization could be explained. Furthermore, a thorough analysis of both pre-lithium ELMy and with-lithium ELM-free cases using ideal and non-ideal MHD models is presented, after accurately including a vacuum-like cold halo region in NIMROD to investigate ELMs.« less

Effect of Instructional Strategies and Individual Differences: A Meta-Analytic Assessment.

ERIC Educational Resources Information Center

Baker, Rose M.; Dwyer, Francis

2005-01-01

This meta-analytic study is unique and significant in that all the 1,341 learners in 11 studies completed the Group Embedded Figures Test (GEFT), interacted with the same instructional module, and completed the same five criterion tests measuring different types of educational objectives. Studies varied in presentation mode and type of independent…

A new clocking method for a charge coupled device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Umezu, Rika; Kitamoto, Shunji, E-mail: kitamoto@rikkyo.ac.jp; Murakami, Hiroshi

2014-07-15

We propose and demonstrate a new clocking method for a charge-coupled device (CCD). When a CCD is used for a photon counting detector of X-rays, its weak point is a limitation of its counting rate, because high counting rate makes non-negligible pile-up of photons. In astronomical usage, this pile-up is especially severe for an observation of a bright point-like object. One typical idea to reduce the pile-up is a parallel sum (P-sum) mode. This mode completely loses one-dimensional information. Our new clocking method, panning mode, provides complementary properties between the normal mode and the P-sum mode. We performed a simplemore » simulation in order to investigate a pile-up probability and compared the simulated result and actual obtained event rates. Using this simulation and the experimental results, we compared the pile-up tolerance of various clocking modes including our new method and also compared their other characteristics.« less

Design and fabrication of a 1-DOF drive mode and 2-DOF sense mode micro-gyroscope using SU-8 based UV-LIGA process

NASA Astrophysics Data System (ADS)

Verma, Payal; Juneja, Sucheta; Savelyev, Dmitry A.; Khonina, Svetlana N.; Gopal, Ram

2016-04-01

This paper presents design and fabrication of a 1-DOF (degree-of-freedom) drive mode and 2-DOF sense mode micro-gyroscope. It is an inherently robust structure and offers a high sense frequency bandwidth. The proposed design utilizes resonance of the1-DOF drive mode oscillator and employs dynamic amplification concept in sense modes to increase the sensitivity while maintaining robustness. The 2-DOF in the sense direction renders the device immune to process imperfections and environmental effects. The design is simulated using FEA software (CoventorWare®). The device is designed considering process compatibility with SU-8 based UV-LIGA process, which is an economical fabrication technique. The complete fabrication process is presented along with SEM images of the fabricated device. The device has 9 µm thick Nickel as the key structural layer with an overall reduced key structure size of 2.2 mm by 2.1 mm.

Manipulation and simulations of thermal field profiles in laser heat-mode lithography

NASA Astrophysics Data System (ADS)

Wei, Tao; Wei, Jingsong; Wang, Yang; Zhang, Long

2017-12-01

Laser heat-mode lithography is a very useful method for high-speed fabrication of large-area micro/nanostructures. To obtain nanoscale pattern structures, one needs to manipulate the thermal diffusion channels. This work reports the manipulation of the thermal diffusion in laser heat-mode lithography and provides methods to restrain the in-plane thermal diffusion and improve the out-of-plane thermal diffusion. The thermal field profiles in heat-mode resist thin films have been given. It is found that the size of the heat-spot can be decreased by decreasing the thickness of the heat-mode resist thin films, inserting the thermal conduction layers, and shortening the laser irradiation time. The optimized laser writing strategy is also given, where the in-plane thermal diffusion is completely restrained and the out-of-plane thermal diffusion is improved. The heat-spot size is almost equal to that of the laser spot, accordingly. This work provides a very important guide to laser heat-mode lithography.

High stroke pixel for a deformable mirror

DOEpatents

Miles, Robin R.; Papavasiliou, Alexandros P.

2005-09-20

A mirror pixel that can be fabricated using standard MEMS methods for a deformable mirror. The pixel is electrostatically actuated and is capable of the high deflections needed for spaced-based mirror applications. In one embodiment, the mirror comprises three layers, a top or mirror layer, a middle layer which consists of flexures, and a comb drive layer, with the flexures of the middle layer attached to the mirror layer and to the comb drive layer. The comb drives are attached to a frame via spring flexures. A number of these mirror pixels can be used to construct a large mirror assembly. The actuator for the mirror pixel may be configured as a crenellated beam with one end fixedly secured, or configured as a scissor jack. The mirror pixels may be used in various applications requiring high stroke adaptive optics.

Full pillar extraction at the Kathleen Mine with mobile roof supports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grimm, E.S.

1994-12-31

The Voest Alpine Breaker Line Supports (ABLS) resemble self-propelled longwall shields. Each individual unit consists of four hydraulic legs extending from the base of the unit, pressing a solid flat canopy against the mine roof. Each support unit is capable of exerting 606 tons of force against the roof. A chain curtain on the sides and rear protects the interior of the support from falling rock. The internal scissoring lemniscate design allows for parallel movement of the canopy as it is raised or lowered. Each ABLS has 750 feet of 4 AWG trailing cable to supply 480 volts AC tomore » a permissible controller and a 40 hp explosion-proof electrical motor. The hydraulic pump and reservoir are self-contained and protected with an automatic fire suppression system.« less

A Novel Mobility Device to Improve Walking for a Child With Cerebral Palsy.

PubMed

Fergus, Andrea

2017-10-01

To describe the use and outcomes associated with the Upsee in conjunction with Kinesiotape for a child with cerebral palsy. The Upsee and Kinesiotaping were implemented for 24 weeks with a 31-month-old child with cerebral palsy, Gross Motor Function Classification System level III. She progressed from walking with maximal assistance and extensive gait deviations to walking with supervision with a walker on level surfaces with improved gait. Genu recurvatum, heel strike, scissoring, hip extension, foot placement, step length, and stiff knee in swing improved on the basis of videotaped analyses. The Gross Motor Function Measure-66 improved by 11.4. The Upsee is a clinically feasible approach for gait impairments in children through providing increased opportunities for walking while supporting biomechanical alignment. Upsee effectiveness with and without taping is an area for future study.

Linear electro-optic effect in semiconductors: Ab initio description of the electronic contribution

NASA Astrophysics Data System (ADS)

Prussel, Lucie; Véniard, Valérie

2018-05-01

We propose an ab initio framework to derive the electronic part of the second-order susceptibility tensor for the electro-optic effect in bulk semiconductors. We find a general expression for χ(2 ) evaluated within time-dependent density-functional theory, including explicitly the band-gap corrections at the level of the scissors approximation. Excitonic effects are accounted for, on the basis of a simple scalar approximation. We apply our formalism to the computation of the electro-optic susceptibilities for several semiconductors, such as GaAs, GaN, and SiC. Taking into account the ionic contribution according to the Faust-Henry coefficient, we obtain a good agreement with experimental results. Finally, using different types of strain to break centrosymmetry, we show that high electro-optic coefficients can be obtained in bulk silicon for a large range of frequencies.

THREE PORT LAPAROSCOPIC APPENDECTOMY TECHNIQUE WITH LOW COST AND AESTHETIC ADVANTAGE

PubMed Central

DOMENE, Carlos Eduardo; VOLPE, Paula; HEITOR, Frederico Almeida

2014-01-01

Introduction Despite dating more than 30 years after the first laparoscopic appendectomy, ileocecal appendix resection is still performed by laparotomy in more than 90% of cases, in our country. Aim To describe a technique for laparoscopic removal of the ileocecal appendix with three portals, at low cost and very good aesthetic appearance. Technique Three incisions, one umbilical and two suprapubic are made; permanent material used comprises: grasping forceps, hook, scissors, needle holders, three metal trocars and four other usual instruments, and a single strand of cotton. There is no need to use of operative extractors bags, clips, endoloops, staples or bipolar or harmonic energy instruments. Allows triangulation and instrumentation in the conventional manner. Conclusion The proposed technique is safe and reproducible, easily teachable, at very low cost and can be applied in general hospitals with conventional laparoscopic equipment. PMID:25409972

Effects of electronic and lattice polarization on the band structure of delafossite transparent conductive oxides.

PubMed

Vidal, Julien; Trani, Fabio; Bruneval, Fabien; Marques, Miguel A L; Botti, Silvana

2010-04-02

We use hybrid functionals and restricted self-consistent GW, state-of-the-art theoretical approaches for quasiparticle band structures, to study the electronic states of delafossite Cu(Al,In)O2, the first p-type and bipolar transparent conductive oxides. We show that a self-consistent GW approximation gives remarkably wider band gaps than all the other approaches used so far. Accounting for polaronic effects in the GW scheme we recover a very nice agreement with experiments. Furthermore, the modifications with respect to the Kohn-Sham bands are strongly k dependent, which makes questionable the common practice of using a scissor operator. Finally, our results support the view that the low energy structures found in optical experiments, and initially attributed to an indirect transition, are due to intrinsic defects in the samples.

Testability of evolutionary game dynamics based on experimental economics data

NASA Astrophysics Data System (ADS)

Wang, Yijia; Chen, Xiaojie; Wang, Zhijian

2017-11-01

Understanding the dynamic processes of a real game system requires an appropriate dynamics model, and rigorously testing a dynamics model is nontrivial. In our methodological research, we develop an approach to testing the validity of game dynamics models that considers the dynamic patterns of angular momentum and speed as measurement variables. Using Rock-Paper-Scissors (RPS) games as an example, we illustrate the geometric patterns in the experiment data. We then derive the related theoretical patterns from a series of typical dynamics models. By testing the goodness-of-fit between the experimental and theoretical patterns, we show that the validity of these models can be evaluated quantitatively. Our approach establishes a link between dynamics models and experimental systems, which is, to the best of our knowledge, the most effective and rigorous strategy for ascertaining the testability of evolutionary game dynamics models.

Numerical analysis of two-fluid tearing mode instability in a finite aspect ratio cylinder

NASA Astrophysics Data System (ADS)

Ito, Atsushi; Ramos, Jesús J.

2018-01-01

The two-fluid resistive tearing mode instability in a periodic plasma cylinder of finite aspect ratio is investigated numerically for parameters such that the cylindrical aspect ratio and two-fluid effects are of order unity, hence the real and imaginary parts of the mode eigenfunctions and growth rate are comparable. Considering a force-free equilibrium, numerical solutions of the complete eigenmode equations for general aspect ratios and ion skin depths are compared and found to be in very good agreement with the corresponding analytic solutions derived by means of the boundary layer theory [A. Ito and J. J. Ramos, Phys. Plasmas 24, 072102 (2017)]. Scaling laws for the growth rate and the real frequency of the mode are derived from the analytic dispersion relation by using Taylor expansions and Padé approximations. The cylindrical finite aspect ratio effect is inferred from the scaling law for the real frequency of the mode.

Evaluation on the impact of IMU grades on BDS + GPS PPP/INS tightly coupled integration

NASA Astrophysics Data System (ADS)

Gao, Zhouzheng; Ge, Maorong; Shen, Wenbin; Li, You; Chen, Qijin; Zhang, Hongping; Niu, Xiaoji

2017-09-01

The unexpected observing environments in dynamic applications may lead to partial and/or complete satellite signal outages frequently, which can definitely impact on the positioning performance of the Precise Point Positioning (PPP) in terms of decreasing available satellite numbers, breaking the continuity of observations, and degrading PPP's positioning accuracy. Generally, both the Inertial Navigation System (INS) and the multi-constellation Global Navigation Satellite System (GNSS) can be used to enhance the performance of PPP. This paper introduces the mathematical models of the multi-GNSS PPP/INS Tightly Coupled Integration (TCI), and investigates its performance from several aspects. Specifically, it covers (1) the use of the BDS/GPS PPP, PPP/INS, and their combination; (2) three positioning modes including PPP, PPP/INS TCI, and PPP/INS Loosely Coupled Integration (LCI); (3) the use of four various INS systems named navigation grade, tactical grade, auto grade, and Micro-Electro-Mechanical-Sensors (MEMS) one; (4) three PPP observation scenarios including PPP available, partially available, and fully outage. According to the statistics results, (1) the positioning performance of the PPP/INS (either TCI or LCI) mode is insignificantly depended on the grade of inertial sensor, when there are enough available satellites; (2) after the complete GNSS outages, the TCI mode expresses both higher convergence speed and more accurate positioning solutions than the LCI mode. Furthermore, in the TCI mode, using a higher grade inertial sensor is beneficial for the PPP convergence; (3) under the partial GNSS outage situations, the PPP/INS TCI mode position divergence speed is also restrained significantly; and (4) the attitude determination accuracy of the PPP/INS integration is highly correlated with the grade of inertial sensor.

Pattern of optometry practice and range of services in India.

PubMed

Thite, Nilesh; Jaggernath, Jyoti; Chinanayi, Farai; Bharadwaj, Shrikant; Kunjeer, Gauri

2015-05-01

This study was conducted to evaluate the range of services provided by optometrists in various modes of optometric practice in India. An online questionnaire was administered to 1674 optometrists to collect information on the range of optometric services offered. Data were analyzed based on variables including sex, educational qualification, and modes of practice. Two-sample Wilcoxon rank sum tests, χ tests, and Fisher exact text were used to conduct inferential statistics. A total of 563 valid and completed survey questionnaires were received from graduates of 41 optometry institutes working across 23 states of India. Of these, 225 (40.0%) were female, 288 (51.2%) had completed postgraduate education, and 340 (60.5%) were involved in more than one mode of practice. The top three modes of practice were hospital-based practice (44.8%), academia (42.8%), and optical retail (33.0%). Of the 441, out of 563 (78.3%) respondents involved in patient care, the majority (98.4%) performed refraction and routine eye examination, 70.3% dispensed contact lenses, and 66.9% practiced optical dispensing. Lower involvement was seen in providing binocular-vision (45.1%) and low-vision services (30.2%). Higher education was associated with advanced level of practice (p < 0.05) except clinical investigative procedures. There was a significant association between postgraduate studies and involvement in academics and research (p < 0.01). Most optometrists are engaged in multiple modes of practice, with optical practice, hospital-based practice, and academia being the leading modes. Optometrists need to be more involved in providing the core optometric services of binocular vision and low vision. Higher education has an impact on the level of optometric practice.

Complete spatiotemporal characterization and optical transfer matrix inversion of a 420 mode fiber.

PubMed

Carpenter, Joel; Eggleton, Benjamin J; Schröder, Jochen

2016-12-01

The ability to measure a scattering medium's optical transfer matrix, the mapping between any spatial input and output, has enabled applications such as imaging to be performed through media which would otherwise be opaque due to scattering. However, the scattering of light occurs not just in space, but also in time. We complete the characterization of scatter by extending optical transfer matrix methods into the time domain, allowing any spatiotemporal input state at one end to be mapped directly to its corresponding spatiotemporal output state. We have measured the optical transfer function of a multimode fiber in its entirety; it consists of 420 modes in/out at 32768 wavelengths, the most detailed complete characterization of multimode waveguide light propagation to date, to the best of our knowledge. We then demonstrate the ability to generate any spatial/polarization state at the output of the fiber at any wavelength, as well as predict the temporal response of any spatial/polarization input state.

Three is much more than two in coarsening dynamics of cyclic competitions

NASA Astrophysics Data System (ADS)

Mitarai, Namiko; Gunnarson, Ivar; Pedersen, Buster Niels; Rosiek, Christian Anker; Sneppen, Kim

2016-04-01

The classical game of rock-paper-scissors has inspired experiments and spatial model systems that address the robustness of biological diversity. In particular, the game nicely illustrates that cyclic interactions allow multiple strategies to coexist for long-time intervals. When formulated in terms of a one-dimensional cellular automata, the spatial distribution of strategies exhibits coarsening with algebraically growing domain size over time, while the two-dimensional version allows domains to break and thereby opens the possibility for long-time coexistence. We consider a quasi-one-dimensional implementation of the cyclic competition, and study the long-term dynamics as a function of rare invasions between parallel linear ecosystems. We find that increasing the complexity from two to three parallel subsystems allows a transition from complete coarsening to an active steady state where the domain size stays finite. We further find that this transition happens irrespective of whether the update is done in parallel for all sites simultaneously or done randomly in sequential order. In both cases, the active state is characterized by localized bursts of dislocations, followed by longer periods of coarsening. In the case of the parallel dynamics, we find that there is another phase transition between the active steady state and the coarsening state within the three-line system when the invasion rate between the subsystems is varied. We identify the critical parameter for this transition and show that the density of active boundaries has critical exponents that are consistent with the directed percolation universality class. On the other hand, numerical simulations with the random sequential dynamics suggest that the system may exhibit an active steady state as long as the invasion rate is finite.

Characteristics and visual outcomes of patients hospitalized for ocular trauma in central China: 2006–2011

PubMed Central

Qi, Ying; Zhang, Feng-Yan; Peng, Guang-Hua; Zhu, Yu; Wan, Guang-Ming; Wang, Wen-Zhan; Ma, Jing; Ren, Shi-Jie

2015-01-01

AIM To complete the data of ocular trauma in central China, as a well-known tertiary referral center for ocular trauma, we documented the epidemiological characteristics and visual outcomes of patients hospitalized for ocular trauma in this region. METHODS A retrospective study of patients hospitalized for ocular trauma in central China from 2006 to 2011 was performed. RESULTS This study included 5964 eyes of 5799 patients. The average age was 35.5±21.8y with a male-to-female ratio of 2.8:1. The most common age was 45-59y age group. Most patients were farmers and workers (51.9%). The most common injuries were firework related (24.5%), road traffic related (24.2%), and work related (15.0%). Among the most common causative agents were firecrackers (24.5%), followed by metal/knife/scissors (21.4%). Most injuries occurred in January (14.2%), February (27.0%), and August (10.0%). There were 8.5% patients with ocular injuries combined with other injuries. The incidence of open ocular injuries (4585 eyes, 76.9%) was higher than closed ocular injuries (939 eyes, 15.7%). The incidences of chemical and thermal ocular injuries were 1.2% and 0.6%. Ocular trauma score (OTS) predicted final visual acuity at non light perception (NLP), 20/200-20/50 and 20/40 with a sensitivity of 100%, and light perception (LP)/hand motion (HM) and 1/200-19/200 with a specificity of 100%. CONCLUSIONS This study provides recent epidemiological data of patients hospitalized for ocular trauma in central China. Some factors influencing the visual outcome include time interval between injury and visit to the clinic, wound location, open or closed globe injury, initial visual acuity, and OTS. PMID:25709927

Fine motor and self-care milestones for individuals with Down syndrome using a Retrospective Chart Review.

PubMed

Frank, K; Esbensen, A J

2015-08-01

Developmental milestone markers for fine motor and self-care skills among children with Down syndrome (DS) are either minimal, anecdotal or out-of date. Our goal was to produce normative expectations for the development of fine motor and self-care milestones specific to children with DS. A cross-sectional retrospective chart review was completed on 274 children with DS seen at a specialty clinic that ranged in age from 4 months to 18 years. Specific skills were assessed at occupational therapy assessments as either present or absent, including fine motor, handwriting, scissor usage, self-feeding and clothing management. Fine motor milestones describing when 10-30% ('early achievers') and 75-95% ('representative achievement') of children with DS had mastered each skill were developed based upon descriptive review. As the fine motor and self-care skills advanced in complexity, the range of ages for documented skill acquisition was observed to increase. Age ranges for the mastery of fine motor developmental milestones for early and representative achievement were developed based upon descriptive analysis of cross-sectional retrospective clinical chart reviews. That the age range for mastering fine motor and self-care skills broadens as children with DS get older is in agreement with what is identified in the DS behavioural phenotype with regard to variable motor skills overall. These fine motor and self-care developmental milestone markers contribute to the field by informing parents, caregivers and healthcare providers of potential fine motor and self-care outcomes and describing normative development for children with DS. © 2014 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

An Abrupt Transition to an Intergranular Failure Mode in the Near-Threshold Fatigue Crack Growth Regime in Ni-Based Superalloys

NASA Astrophysics Data System (ADS)

Telesman, J.; Smith, T. M.; Gabb, T. P.; Ring, A. J.

2018-06-01

Cyclic near-threshold fatigue crack growth (FCG) behavior of two disk superalloys was evaluated and was shown to exhibit an unexpected sudden failure mode transition from a mostly transgranular failure mode at higher stress intensity factor ranges to an almost completely intergranular failure mode in the threshold regime. The change in failure modes was associated with a crossover of FCG resistance curves in which the conditions that produced higher FCG rates in the Paris regime resulted in lower FCG rates and increased ΔK th values in the threshold region. High-resolution scanning and transmission electron microscopy were used to carefully characterize the crack tips at these near-threshold conditions. Formation of stable Al-oxide followed by Cr-oxide and Ti-oxides was found to occur at the crack tip prior to formation of unstable oxides. To contrast with the threshold failure mode regime, a quantitative assessment of the role that the intergranular failure mode has on cyclic FCG behavior in the Paris regime was also performed. It was demonstrated that even a very limited intergranular failure content dominates the FCG response under mixed mode failure conditions.

Mode transition coordinated control for a compound power-split hybrid car

NASA Astrophysics Data System (ADS)

Wang, Chen; Zhao, Zhiguo; Zhang, Tong; Li, Mengna

2017-03-01

With a compound power-split transmission directly connected to the engine in hybrid cars, dramatic fluctuations in engine output torque result in noticeable jerks when the car is in mode transition from electric drive mode to hybrid drive mode. This study designed a mode transition coordinated control strategy, and verified that strategy's effectiveness with both simulations and experiments. Firstly, the mode transition process was analyzed, and ride comfort issues during the mode transition process were demonstrated. Secondly, engine ripple torque was modeled using the measured cylinder pumping pressure when the engine was not in operation. The complete dynamic plant model of the power-split hybrid car was deduced, and its effectiveness was validated by a comparison of experimental and simulation results. Thirdly, a coordinated control strategy was designed to determine the desired engine torque, motor torque, and the moment of fuel injection. Active damping control with two degrees of freedom, based on reference output shaft speed estimation, was designed to mitigate driveline speed oscillations. Carrier torque estimation based on transmission kinematics and dynamics was used to suppress torque disturbance during engine cranking. The simulation and experimental results indicate that the proposed strategy effectively suppressed vehicle jerks and improved ride comfort during mode transition.

Prediction of wrinklings and porosities of thermoplastic composits after thermostamping

NASA Astrophysics Data System (ADS)

Hamila, Nahiene; Guzman-Maldonado, Eduardo; Xiong, Hu; Wang, Peng; Boisse, Philippe; Bikard, Jerome

2018-05-01

During thermoforming process, the consolidation deformation mode of thermoplastic prepregs is one of the key deformation modes especially in the consolidation step, where the two resin flow phenomena: resin percolation and transverse squeeze flow, play an important role. This occurs a viscosity behavior for consolidation mode. Based on a visco-hyper-elastic model for the characterization of thermoplastic prepregs proposed by Guzman, which involves different independent modes of deformation: elongation mode, bending mode with thermo-dependent, and viscoelastic in-plan shearing mode with thermo-dependent, a viscoelastic model completed with consolidation behavior will be presented in this paper. A completed three-dimensional mechanical behavior with compaction effect for thermoplastic pre-impregnated composites is constituted, and the associated parameters are identified by compaction test. Moreover, a seven-node prismatic solid-shell finite element approach is used for the forming simulation. To subdue transverse shear locking, an intermediate material frame related to the element sides is introduced in order to fix nodal transverse shear strain components. Indeed, the enhanced assumed strain method and a reduced integration scheme are combined offering a linear varying strain field along the thickness direction to circumvent thickness locking, and an hourglass stabilization procedure is employed in order to correct the element's rank deficiency for pinching. An additional node is added at the center providing a quadratic interpolation of the displacement in the thickness direction. The predominance of this element is the ability of three dimensional analysis, especially for the transverse stress existence through the thickness of material, which is essential for the consolidation modelling. Finally, an intimate contact model is employed to predict the evolution of the consolidation which permits the microstructure prediction of void presented through the prepreg. Several tests including a thermoforming test are launched to evaluate the consolidation model and the accuracy of the proposed element.

Spheroidal and Toroidal Modes for Tidal Kinetic Energy in Spherical Elastic Bodies

NASA Astrophysics Data System (ADS)

Getino, Juan; Escapa, Alberto; Garcia, Amelia

In this work, the total expression of the perturbation of the kinetic energy of rotation, when an elastic spherical solid is deformed due to the gravitational attraction of external bodies, is studied. We do not limit this study to any order in the expansion of the perturbing potential in spherical harmonics, and we consider in the expression of the displacement vector the complete solution, composed by spheroidal and toroidal modes. We show in a very simple way, by using the properties of the Legendre polynomials, that the toroidal modes have no contribution at all under the hypothesis of spherical body, and, among the spheroidal modes, only the term n=2 acts, therefore the perturbation produced by the spheroidal component for n=2 gathers the total perturbation.

Control of large flexible spacecraft by the independent modal-space control method

NASA Technical Reports Server (NTRS)

Meirovitch, L.; Shenar, J.

1984-01-01

The problem of control of a large-order flexible structure in the form of a plate-like lattice by the Independent Modal-Space Control (IMSC) method is presented. The equations of motion are first transformed to the modal space, thus obtaining internal (plant) decoupling of the system. Then, the control laws are designed in the modal space for each mode separately, so that the modal equations of motion are rendered externally (controller) decoupled. This complete decoupling applies both to rigid-body modes and elastic modes. The application of linear optimal control, in conjunction with a quadratic performance index, is first reviewed. A solution for high-order systems is proposed here by the IMSC method, whereby the problem is reduced to a number of modal minimum-fuel problems for the controlled modes.

Guidance and control strategies for aerospace vehicles

NASA Technical Reports Server (NTRS)

Hibey, Joseph L.; Naidu, Desineni S.

1990-01-01

The first part of the report concerns broadly the summary of the work done in the areas of singular perturbations and time scales (SPaTS), aerobraking technology, guidance and aerocruise. The synergistic plane change problem connected with orbital transfer employing aeroassist technology, is addressed. The mission involves transfer from high Earth orbit to low Earth orbit with plane change being performed within the atmosphere. The complete mission consists of a deorbit phase, atmospheric phase, and finally reorbit phase. The atmospheric maneuver is composed of an entry mode, a cruise mode, and finally an exit mode. During the cruise mode, constant altitude and velocity are maintained by means of bank angle control with constant thrust or thrust control with constant bank angle. Comparisons between these two control strategies bring out some interesting features.

PEM regenerative fuel cells

NASA Technical Reports Server (NTRS)

Swette, Larry L.; Laconti, Anthony B.; Mccatty, Stephen A.

1993-01-01

This paper will update the progress in developing electrocatalyst systems and electrode structures primarily for the positive electrode of single-unit solid polymer proton exchange membrane (PEM) regenerative fuel cells. The work was done with DuPont Nafion 117 in complete fuel cells (40 sq cm electrodes). The cells were operated alternately in fuel cell mode and electrolysis mode at 80 C. In fuel cell mode, humidified hydrogen and oxygen were supplied at 207 kPa (30 psi); in electrolysis mode, water was pumped over the positive electrode and the gases were evolved at ambient pressure. Cycling data will be presented for Pt-Ir catalysts and limited bifunctional data will be presented for Pt, Ir, Ru, Rh, and Na(x)Pt3O4 catalysts as well as for electrode structure variations.

Dynamic analysis for shuttle design verification

NASA Technical Reports Server (NTRS)

Fralich, R. W.; Green, C. E.; Rheinfurth, M. H.

1972-01-01

Two approaches that are used for determining the modes and frequencies of space shuttle structures are discussed. The first method, direct numerical analysis, involves finite element mathematical modeling of the space shuttle structure in order to use computer programs for dynamic structural analysis. The second method utilizes modal-coupling techniques of experimental verification made by vibrating only spacecraft components and by deducing modes and frequencies of the complete vehicle from results obtained in the component tests.

Analytical and Experimental Random Vibration of Nonlinear Aeroelastic Structures.

DTIC Science & Technology

1987-01-28

firstorder differential equations. In view of the system complexi- ty an attempt s made to close the infinite hierarchy by using a Gaussian scheme. This sc...year of this project-. When the first normal mode is externally excited by a band-limited random excitation, the system mean square response is found...governed mainly by the internal detuning parameter and the system damping ratios. The results are completely different when the second normal mode is

Mode of action of leucocin K7 produced by Leuconostoc mesenteroides K7 against Listeria monocytogenes and its potential in milk preservation.

PubMed

Shi, Feng; Wang, Yanwei; Li, Yongfu; Wang, Xiaoyuan

2016-09-01

To investigate the mode of action of leucocin K7 against Listeria monocytogenes and to assess its inhibitory effect on Lis. monocytogenes in refrigerated milk. A bacteriocin-producing strain, Leuconostoc mesenteroides K7, was isolated from a fermented pickle. The bacteriocin, leucocin K7, exhibited antagonistic activity against Lis. monocytogenes with an MIC of 28 µg/ml. It was sensitive to proteaseS and displayed good thermal stability and broad active pH range. Leucocin K7 had no effect on the efflux of ATP from Lis. monocytogenes but triggered the efflux of K(+) and the intracellular hydrolysis of ATP. It also dissipated the transmembrane electrical potential completely and transmembrane pH gradient partially. It 80 AU/ml inhibited the growth of Lis. monocytogenes by 2.3-3.9 log units in milk; when combined with glycine (5 mg/ml), it completely eliminated viable Lis. monocytogenes over 7 days Leucocin K7 shows different mode of action from nisin and may have potential application in milk preservation.

Magnetization reversal modes in fourfold Co nano-wire systems

NASA Astrophysics Data System (ADS)

Blachowicz, T.; Ehrmann, A.

2015-09-01

Magnetic nano-wire systems are, as well as other patterned magnetic structures, of special interest for novel applications, such as magnetic storage media. In these systems, the coupling between neighbouring magnetic units is most important for the magnetization reversal process of the complete system, leading to a variety of magnetization reversal mechanisms. This article examines the influence of the magnetic material on hysteresis loop shape, coercive field, and magnetization reversal modes. While iron nano-wire systems exhibit flat or one-step hysteresis loops, systems consisting of cobalt nano-wires show hysteresis loops with several longitudinal steps and transverse peaks, correlated to a rich spectrum of magnetization reversal mechanisms. We show that changing the material parameters while the system geometry stays identical can lead to completely different hysteresis loops and reversal modes. Thus, especially for finding magnetic nano-systems which can be used as quaternary or even higher-order storage devices, it is rational to test several materials for the planned systems. Apparently, new materials may lead to novel and unexpected behaviour - and can thus result in novel functionalities.

Effects of a semi-infinite stratification on the Rayleigh-Taylor instability in an interface with surface tension

NASA Astrophysics Data System (ADS)

de Andrea González, Ángel; González-Gutiérrez, Leo M.

2017-09-01

The Rayleigh-Taylor instability (RTI) in an infinite slab where a constant density lower fluid is initially separated from an upper stratified fluid is discussed in linear regime. The upper fluid is of increasing exponential density and surface tension is considered between both of them. It was found useful to study stability by using the initial value problem approach (IVP), so that we ensure the inclusion of certain continuum modes, otherwise neglected. This methodology includes the branch cut in the complex plane, consequently, in addition to discrete modes (surface RTI modes), a set of continuum modes (internal RTI modes) also appears. As a result, the usual information given by the normal mode method is now complete. Furthermore, a new role is found for surface tension: to transform surface RTI modes (discrete spectrum) into internal RTI modes belonging to a continuous spectrum at a critical wavenumber. As a consequence, the cut-off wavenumber disappears: i.e. the growth rate of the RTI surface mode does not decay to zero at the cut-off wavenumber, as previous researchers used to believe. Finally, we found that, due to the continuum, the asymptotic behavior of the perturbation with respect to time is slower than the exponential when only the continuous spectrum exists.

Lack of dependence on resonant error field of locked mode island size in ohmic plasmas in DIII-D

DOE PAGES

Haye, R. J. La; Paz-Soldan, C.; Strait, E. J.

2015-01-23

DIII-D experiments show that fully penetrated resonant n=1 error field locked modes in Ohmic plasmas with safety factor q 95≳3 grow to similar large disruptive size, independent of resonant error field correction. Relatively small resonant (m/n=2/1) static error fields are shielded in Ohmic plasmas by the natural rotation at the electron diamagnetic drift frequency. However, the drag from error fields can lower rotation such that a bifurcation results, from nearly complete shielding to full penetration, i.e., to a driven locked mode island that can induce disruption.

Optical phonon modes in rhombohedral boron monosulfide under high pressure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cherednichenko, Kirill A.; IMPMC, UPMC Sorbonne Universités, CNRS UMR 7590, 75005 Paris; LSPM–CNRS, Université Paris Nord, 93430 Villetaneuse

2015-05-14

Raman spectra of rhombohedral boron monosulfide (r-BS) were measured under pressures up to 34 GPa at room temperature. No pressure-induced structural phase transition was observed, while strong pressure shift of Raman bands towards higher wavenumbers has been revealed. IR spectroscopy as a complementary technique has been used in order to completely describe the phonon modes of r-BS. All experimentally observed bands have been compared with theoretically calculated ones and modes assignment has been performed. r-BS enriched by {sup 10}B isotope was synthesized, and the effect of boron isotopic substitution on Raman spectra was observed and analyzed.

Gouy Phase Radial Mode Sorter for Light: Concepts and Experiments.

PubMed

Gu, Xuemei; Krenn, Mario; Erhard, Manuel; Zeilinger, Anton

2018-03-09

We present an in principle lossless sorter for radial modes of light, using accumulated Gouy phases. The experimental setups have been found by a computer algorithm, and can be intuitively understood in a geometric way. Together with the ability to sort angular-momentum modes, we now have access to the complete two-dimensional transverse plane of light. The device can readily be used in multiplexing classical information. On a quantum level, it is an analog of the Stern-Gerlach experiment-significant for the discussion of fundamental concepts in quantum physics. As such, it can be applied in high-dimensional and multiphotonic quantum experiments.

NONLINEAR AND FIBER OPTICS: Influence of nonlinearity of the parameters of guided modes in fiber waveguides

NASA Astrophysics Data System (ADS)

Goncharenko, I. A.

1990-04-01

The shift formula method is used to obtain analytic expressions which provide estimates of the influence of nonlinearity on the parameters of fiber waveguide modes. Depending on the sign of the nonlinear susceptibility of the waveguide core, the nonlinearity can improve or impair (right down to complete loss) the waveguiding properties of fibers. The optical power at which a fiber loses its guiding properties is constant far from the cutoff, but rises steeply near the critical cutoff frequency. The nonlinearity can be used to vary the zero dispersion wavelength and the range of single-mode operation of a fiber waveguide.

Development of simplified external control techniques for broad area semiconductor lasers

NASA Technical Reports Server (NTRS)

Davis, Christopher C.

1993-01-01

The goal of this project was to injection lock a 500 mW broad area laser diode (BAL) with a single mode low power laser diode with injection beam delivery through a single mode optical fiber (SMF). This task was completed successfully with the following significant accomplishments: (1) injection locking of a BAL through a single-mode fiber using a master oscillator and integrated miniature optics; (2) generation of a single-lobed, high-power far-field pattern from the injection-locked BAL that steers with drive current; and (3) a comprehensive theoretical analysis of a model that describes the observed behavior of the injection locked oscillator.

Gouy Phase Radial Mode Sorter for Light: Concepts and Experiments

NASA Astrophysics Data System (ADS)

Gu, Xuemei; Krenn, Mario; Erhard, Manuel; Zeilinger, Anton

2018-03-01

We present an in principle lossless sorter for radial modes of light, using accumulated Gouy phases. The experimental setups have been found by a computer algorithm, and can be intuitively understood in a geometric way. Together with the ability to sort angular-momentum modes, we now have access to the complete two-dimensional transverse plane of light. The device can readily be used in multiplexing classical information. On a quantum level, it is an analog of the Stern-Gerlach experiment—significant for the discussion of fundamental concepts in quantum physics. As such, it can be applied in high-dimensional and multiphotonic quantum experiments.

Preliminary assessment of high power, NERVA-class dual-mode space nuclear propulsion and power systems

NASA Astrophysics Data System (ADS)

Buksa, John J.; Kirk, William L.; Cappiello, Michael W.

A preliminary assessment of the technical feasibility and mass competitiveness of a dual-mode nuclear propulsion and power system based on the NERVA rocket engine has been completed. Results indicate that the coupling of the Rover reactor to a direct Brayton power conversion system can be accomplished through a number of design features. Furthermore, based on previously published and independently calculated component masses, the dual-mode system was found to have the potential to be mass competitive with propulsion/power systems that use separate reactors. The uncertainties of reactor design modification and shielding requirements were identified as important issues requiring future investigation.

Observation of soft phonon mode in TbFe 3 ( BO 3 ) 4 by inelastic neutron scattering

DOE PAGES

Pavlovskiy, M. S.; Shaykhutdinov, Krill A.; Wu, L. S.; ...

2018-02-28

In this study, the phonon dispersion in terbium iron borate TbFe 3(BO 3) 4 has been measured by inelastic neutron scattering in a temperature range 180S=192.5 K and studied by ab initio calculations. Significant, but not complete, softening of the transverse acoustic (TA) branch has been observed at the corner of the Brillouin zone (Λ point) at temperatures T≳T S, in full agreement with theoretical calculations. Finally, the TA soft mode undergoes considerable broadening at the Λ point near the transition temperature that can be attributed to the anharmonic interference between transverse acoustic and optical modes.