Validating Laboratory Results in Electronic Health Records
Perrotta, Peter L.; Karcher, Donald S.
2017-01-01
Context Laboratories must ensure that the test results and pathology reports they transmit to a patient’s electronic health record (EHR) are accurate, complete, and presented in a useable format. Objective To determine the accuracy, completeness, and formatting of laboratory test results and pathology reports transmitted from the laboratory to the EHR. Design Participants from 45 institutions retrospectively reviewed results from 16 different laboratory tests, including clinical and anatomic pathology results, within the EHR used by their providers to view laboratory results. Results were evaluated for accuracy, presence of required elements, and usability. Both normal and abnormal results were reviewed for tests, some of which were performed in-house and others at a reference laboratory. Results Overall accuracy for test results transmitted to the EHR was greater than 99.3% (1052 of 1059). There was lower compliance for completeness of test results, with 69.6% (732 of 1051) of the test results containing all essential reporting elements. Institutions that had fewer than half of their orders entered electronically had lower test result completeness rates. The rate of appropriate formatting of results was 90.9% (98 of 1010). Conclusions The great majority of test results are accurately transmitted from the laboratory to the EHR; however, lower percentages are transmitted completely and in a useable format. Laboratories should verify the accuracy, completeness, and format of test results at the time of test implementation, after test changes, and periodically. PMID:27575266
30 CFR 250.1622 - Approvals and reporting of well-completion and well-workover operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... results of any well tests, shall be submitted to the District Manager. (2) Within 30 days after completing... District Manager and shall include the results of any well tests and a new schematic of the well if any... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Approvals and reporting of well-completion and...
Ott, Summer; Schatz, Philip; Solomon, Gary; Ryan, Joseph J
2014-03-01
This study documented baseline neurocognitive performance of 23,815 athletes on the Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT) test. Specifically, 9,733 Hispanic, Spanish-speaking athletes who completed the ImPACT test in English and 2,087 Hispanic, Spanish-speaking athletes who completed the test in Spanish were compared with 11,955 English-speaking athletes who completed the test in English. Athletes were assigned to age groups (13-15, 16-18). Results revealed a significant effect of language group (p < .001; partial η(2) = 0.06) and age (p < .001; partial η(2) = 0.01) on test performance. Younger athletes performed more poorly than older athletes, and Spanish-speaking athletes completing the test in Spanish scored more poorly than Spanish-speaking and English-speaking athletes completing the test in English, on all Composite scores and Total Symptom scores. Spanish-speaking athletes completing the test in English also performed more poorly than English-speaking athletes completing the test in English on three Composite scores. These differences in performance and reported symptoms highlight the need for caution in interpreting ImPACT test data for Hispanic Americans.
ROC and Loss Function Analysis in Sequential Testing
ERIC Educational Resources Information Center
Muijtjens, Arno M. M.; Van Luijk, Scheltus J.; Van Der Vleuten, Cees P. M.
2006-01-01
Sequential testing is applied to reduce costs in SP-based tests (OSCEs). Initially, all candidates take a screening test consisting of a part of the OSCE. Candidates who fail the screen sit the complete test, whereas those who pass the screen are qualified as a pass of the complete test. The procedure may result in a reduction of testing…
Congenital syphilis investigation processes and timing in Louisiana.
Bradley, Heather; Gruber, DeAnn; Introcaso, Camille E; Foxhood, Joseph; Wendell, Debbie; Rahman, Mohammad; Ewell, Joy; Kirkcaldy, Robert D; Weinstock, Hillard S
2014-09-01
Congenital syphilis (CS) is a potentially life-threatening yet preventable infection. State and local public health jurisdictions conduct investigations of possible CS cases to determine case status and to inform public health prevention efforts. These investigations occur when jurisdictions receive positive syphilis test results from pregnant women or from infants. We extracted data from Louisiana's electronic case management system for 328 infants investigated as possible CS cases in 2010 to 2011. Using date stamps from the case management system, we described CS investigations in terms of processes and timing. Eighty-seven investigations were prompted by positive test results from women who were known to be pregnant by the health jurisdiction, and 241 investigations were prompted by positive syphilis test results from infants. Overall, investigations required a median of 101 days to complete, although 25% were complete within 36 days. Investigations prompted by positive test results from infants required a median of 135 days to complete, and those prompted by positive test results from pregnant women required a median of 41 days. Three times as many CS investigations began with reported positive syphilis test results from infants as from pregnant women, and these investigations required more time to complete. When CS investigations begin after an infant's birth, the opportunity to ensure that women are treated during pregnancy is missed, and surveillance data cannot inform prevention efforts on a timely basis. Consistently ascertaining pregnancy status among women whose positive syphilis test results are reported to public health jurisdictions could help to assure timely CS prevention efforts.
Student Test Grades in College: A Study of Possible Predictors
ERIC Educational Resources Information Center
Hammonds, Frank; Mariano, Gina
2015-01-01
Research on variables related to test performance has produced mixed results. Typically, research of this type involves only a few variables. In an attempt to obtain a more complete picture, we investigated how test grades might be related to variables such as classification, student seating location, test completion time, predicted grade, time…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bartke, T.C.
Under the US Department of Energy's Underground-Coal-Conversion program, four field tests were completed in 1979 and preparations were begun in 1980 for two additional field tests to be operated in 1981. The Laramie Energy Technology Center (LETC) and Sandia National Laboratories (SNL) completed Hanna IV, an air gasification test in Wyoming subbituminous coal. The Morgantown Energy Technology Center (METC) completed Pricetown 1, an air gasification test in West Virginia bituminous coal. Lawrence Livermore National Laboratory (LLNL) completed Hoe Creek 3, a steam-oxygen gasification test in Wyoming subbituminous coal. Gulf Research and Development Co. completed Steeply Dipping Beds (SDB) Test 1,more » primarily an air gasification test in Wyoming subbituminous coal and the first SDB test in the US. In 1980, Gulf R and D Co. began preparation of SDB Test 2, scheduled for operation in the fall of 1981. The DOE project teams at LETC, METC, LLNL, and SNL, in association with the Washington Irrigation and Development Co. (WIDCo), Washington Water Power (WWP), and the State of Washington, are preparing a field test site in the Centralia-Chehalis coal district of Washington. A series of large coal block tests will be completed prior to the field test, scheduled for operation in 1982 or 1983. This field test will utilize a directionally drilled link and steam-oxygen gasification system. This paper summarizes the results of the four recently completed field tests and the plans for additional tests.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bragg-Sitton, S.M.; Propulsion Research Center, NASA Marshall Space Flight Center, Huntsville, AL 35812; Kapernick, R.
2004-02-04
Experiments have been designed to characterize the coolant gas flow in two space reactor concepts that are currently under investigation by NASA Marshall Space Flight Center and Los Alamos National Laboratory: the direct-drive gas-cooled reactor (DDG) and the SAFE-100 heatpipe-cooled reactor (HPR). For the DDG concept, initial tests have been completed to measure pressure drop versus flow rate for a prototypic core flow channel, with gas exiting to atmospheric pressure conditions. The experimental results of the completed DDG tests presented in this paper validate the predicted results to within a reasonable margin of error. These tests have resulted in amore » re-design of the flow annulus to reduce the pressure drop. Subsequent tests will be conducted with the re-designed flow channel and with the outlet pressure held at 150 psi (1 MPa). Design of a similar test for a nominal flow channel in the HPR heat exchanger (HPR-HX) has been completed and hardware is currently being assembled for testing this channel at 150 psi. When completed, these test programs will provide the data necessary to validate calculated flow performance for these reactor concepts (pressure drop and film temperature rise)« less
The Interrelationship of Ego, Moral, and Conceptual Development in a College Group.
ERIC Educational Resources Information Center
Lutwak, Nita
1984-01-01
Compared three personality theories (ego development, moral development, and conceptual systems theory) in 102 college students who completed the Sentence Completion Test, This I Believe Test, and Defining Issues Test. Results indicated a significant relationship between all three pairs of theories. (JAC)
Amodal completion of moving objects by pigeons.
Nagasaka, Yasuo; Wasserman, Edward A
2008-01-01
In a series of four experiments, we explored whether pigeons complete partially occluded moving shapes. Four pigeons were trained to discriminate between a complete moving shape and an incomplete moving shape in a two-alternative forced-choice task. In testing, the birds were presented with a partially occluded moving shape. In experiment 1, none of the pigeons appeared to complete the testing stimulus; instead, they appeared to perceive the testing stimulus as incomplete fragments. However, in experiments 2, 3, and 4, three of the birds appeared to complete the partially occluded moving shapes. These rare positive results suggest that motion may facilitate amodal completion by pigeons, perhaps by enhancing the figure - ground segregation process.
Molina, Rose; Venkatesh, Kartik; Schantz-Dunn, Julianna; Meadows, Audra; Nour, Nawal; Diouf, Khady
2016-06-01
Background Currently there are no guidelines regarding optimal screening for latent tuberculosis infection during pregnancy. Objective This study measures completion rates and the concordance between the TSPOT.TB, a commercially available interferon gamma release assay (IGRA), and the traditional tuberculin skin test (TST) in a predominantly urban minority obstetrics practice. Design This is an observational cohort study of 141 pregnant women enrolled from an obstetrics practice with a large immigrant population. Women with a history of a positive TST result were excluded. Demographic and clinical risk factors for tuberculosis were assessed. Enrolled women underwent a T-SPOT.TB test and placement of TST, and returned in 48-72 h for TST interpretation. We calculated the completion rate and frequency of a positive result for each test, as well as the concordance between the T-SPOT.TB and TST. Results Among the 141 women enrolled, 75 % were either Latina or African-American, 44 % were born in a country with a high TB prevalence, and 52 % had received the Bacillus Calmette-Guerin vaccine. Seven women (5 %) had a positive screening test, a total of 3 positive T-SPOT.TB results and 6 positive TST results, and all were from countries with a high TB prevalence. The concordance of the two tests was 96.3 %. The completion rate for the T-SPOT.TB was 98 %, while the completion rate for the TST was 63 %. The IGRA test had a markedly higher completion rate in addition to maintaining high concordance with the two-step TST in this population of pregnant women with a high prevalence of prior TB exposure. Targeted screening of women from countries with a high prevalence of tuberculosis may be warranted during prenatal care.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Loftin, B.; Abramczyk, G.
Destructive testing of an ES-3100 Shipping Container was completed by the Packaging Technology and Pressurized Systems organization within the Savannah River National Laboratory in order to qualify the ES-3100 as a candidate storage and transport package for applications at various facilities at the Savannah River Site. The testing consisted of the detonation of three explosive charges at separate locations on a single ES-3100. The locations for the placement were chosen based the design of the ES-3100 as well as the most likely places for the package to incur damage as a result of the detonation. The testing was completed atmore » an offsite location, which raised challenges as well as allowed for development of new partnerships for this testing and for potential future testing. The results of the testing, the methods used to complete the testing, and similar, potential future work will be discussed.« less
[Differences in sentence completion test responses based on degree of self-disclosure].
Kumano, Michiko
2006-10-01
Projective tests are considered to uncover unconscious emotions while avoiding psychological resistance. However, the results of projective tests may be affected by conscious emotions. This study investigates whether self-disclosure, which is a conscious factor, affected the results of a sentence completion test (SCT), which is a projective test. Eighty-five university students completed a questionnaire about their degree of self-disclosure, and a SCT. The results showed that low disclosers gave more negative responses on the SCT (such as denial responses, physiologically related responses, short responses, and short emotional responses) than high disclosers. High disclosers expressed more emotions, thoughts and feelings (i.e., opinions, positive emotions, wishes, directive disclosure responses, and positive self-images) than low disclosers. Although projective tests are assumed to minimize psychological resistance, the low disclosers gave more defensive responses on the SCT, and the high disclosers exhibited more emotional responses. In summary, self-disclosure, which is a conscious factor, affected SCT responses.
Gray Matter and Intelligence Factors: Is There a Neuro-g?
ERIC Educational Resources Information Center
Haier, Richard J.; Colom, Roberto; Schroeder, David H.; Condon, Christopher A.; Tang, Cheuk; Eaves, Emily; Head, Kevin
2009-01-01
Heterogeneous results among neuro-imaging studies using psychometric intelligence measures may result from the variety of tests used. The g-factor may provide a common metric across studies. Here we derived a g-factor from a battery of eight cognitive tests completed by 6929 young adults, 40 of whom also completed structural MRI scans. Regional…
Effects of surface features on word-fragment completion in amnesic subjects.
Kinoshita, S; Wayland, S V
1993-01-01
Patients with amnesia resulting from alcoholic Korsakoff syndrome and elderly control patients studied a list of words in two typographies (typed and handwritten) and then received a word-fragment completion test (e.g., -ys-e-y for mystery) in which the test cues also varied in typography. Unlike the elderly control patients, the amnesic patients did not show greater priming effect when the typography at test matched that at study. The amount of typography-dependent priming was positively correlated with the score on the Wechsler Memory Scale. These results suggest that the effects of typography change on repetition priming in word-fragment completion reflect explicit recollection, and that the representation that supports repetition priming effects observed with amnesic subjects in the word-fragment completion task does not code typography information.
Electric power system test and verification program
NASA Technical Reports Server (NTRS)
Rylicki, Daniel S.; Robinson, Frank, Jr.
1994-01-01
Space Station Freedom's (SSF's) electric power system (EPS) hardware and software verification is performed at all levels of integration, from components to assembly and system level tests. Careful planning is essential to ensure the EPS is tested properly on the ground prior to launch. The results of the test performed on breadboard model hardware and analyses completed to date have been evaluated and used to plan for design qualification and flight acceptance test phases. These results and plans indicate the verification program for SSF's 75-kW EPS would have been successful and completed in time to support the scheduled first element launch.
Drag and Cooling with Various Forms of Cowling for a "Whirlwind" Radial Air-cooled Engine II
NASA Technical Reports Server (NTRS)
Weick, Fred E
1930-01-01
This report gives the results of the second portion of an investigation in the twenty-foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics, on the cowling and cooling of a "Whirlwind" J-5 radial air-cooled engine. The first portion pertains to tests with a cabin fuselage. This report covers tests with several forms of cowling, including conventional types, individual fairings behind the cylinders, individual hoods over the over the cylinders, and the new N. A. C. A. complete cowling, all on an open cockpit fuselage. Drag tests were also made with a conventional engine nacelle, and with a nacelle having the new complete cowling. In the second part of the investigation the results found in the first part were substantiated. It was also found that the reduction in drag with the complete cowling over that with conventional cowling is greater with the smaller bodies than with the cabin fuselage; in fact, the gain in the case of the completely cowled nacelle is over twice that with the cabin fuselage. The individual fairings and hoods did not prove effective in reducing the drag. The results of flight tests on AT-5A airplane has been analyzed and found to agree very well with the results of the wind tunnel tests. (author)
Experimental Investigation of the Robinson-Type Cup Anemometer
NASA Technical Reports Server (NTRS)
Brevoort, M J; Joyner, U T
1936-01-01
This report presents the results of wind tunnel tests on a Robinson-type anemometer. The investigation covered force measurements on individual cups, as well as static and dynamic torque measurements and calibrations on complete cup wheels. In the tests on individual cups 5 cup forms were used and in the measurements on complete cup wheels 4 cup wheels with 3 arm lengths for each cup wheel were tested. All the results are presented in graphical form.
Impact of direct-to-consumer genomic testing at long term follow-up.
Bloss, Cinnamon S; Wineinger, Nathan E; Darst, Burcu F; Schork, Nicholas J; Topol, Eric J
2013-06-01
There are few empirical data to inform the debate surrounding the use and regulation of direct-to-consumer (DTC) genome-wide disease risk tests. This study aimed to determine the long term psychological, behavioural, and clinical impacts of genomic risk testing for common disease. The Scripps Genomic Health Initiative is a prospective longitudinal cohort study of adults who purchased the Navigenics Health Compass, a commercially available genomic test. Web based assessments were administered at baseline, short (3 months), and long term (1 year) follow-up. 2240 participants completed either or both follow-ups and a subset of 1325 completed long term follow-up. There were no significant differences from baseline in anxiety (p=0.50), fat intake (p=0.34), or exercise (p=0.39) at long term follow-up, and 96.8% of the sample had no test related distress. Longitudinal linear mixed model analyses were consistent with results of cross-sectional analyses. Screening test completion was associated with sharing genomic test results with a physician (36.0% shared; p<0.001) and perceived utility of the test (61.5% high perceived utility; p=0.002), but was not associated with the genomic risk estimate values themselves. Over a third of DTC genomic test recipients shared their results with their own physician during an approximate 1 year follow-up period, and this sharing was associated with higher screening test completion. Genomic testing was not associated with long term psychological risks, and most participants reportedly perceived the test to be of high personal utility.
Technical Evaluation Motor No. 7 (TEM-07)
NASA Technical Reports Server (NTRS)
Hugh, Phil
1991-01-01
Technical Evaluation Motor Number 7 (TEM-7) was a full scale, full-duration static test firing of a high performance motor (HPM) configuration solid rocket motor (SRM) with nozzle vectoring. The static test fire occurred on 11 December 1990 at the Thiokol Corporation Static Test Bay T-97. Documented here are the procedures, performance, and results available through 22 January 1991. Critical post test hardware activities and assessment of the test data are not complete. A completed test report will be submitted 60 days after the test date. Included here is a presentation and discussion of the TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107 Revision A, Space Shuttle Technical Evaluation Motor number 7 (TEM-07) Static Fire Test Plan.
40 CFR 205.57-5 - Reporting of the test results.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Reporting of the test results. 205.57... Reporting of the test results. (a) Within 5 working days after completion of testing of all vehicles in a... was authorized by the Administrator, and, if any, the test results for the replaced vehicles. (4) A...
40 CFR 205.57-5 - Reporting of the test results.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Reporting of the test results. 205.57... Reporting of the test results. (a) Within 5 working days after completion of testing of all vehicles in a... was authorized by the Administrator, and, if any, the test results for the replaced vehicles. (4) A...
40 CFR 205.57-5 - Reporting of the test results.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Reporting of the test results. 205.57... Reporting of the test results. (a) Within 5 working days after completion of testing of all vehicles in a... was authorized by the Administrator, and, if any, the test results for the replaced vehicles. (4) A...
40 CFR 205.57-5 - Reporting of the test results.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Reporting of the test results. 205.57... Reporting of the test results. (a) Within 5 working days after completion of testing of all vehicles in a... was authorized by the Administrator, and, if any, the test results for the replaced vehicles. (4) A...
40 CFR 205.57-5 - Reporting of the test results.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Reporting of the test results. 205.57-5... the test results. (a) Within 5 working days after completion of testing of all vehicles in a batch... was authorized by the Administrator, and, if any, the test results for the replaced vehicles. (4) A...
FOCUS: Future of fecal calprotectin utility study in inflammatory bowel disease
Rosenfeld, Greg; Greenup, Astrid-Jane; Round, Andrew; Takach, Oliver; Halparin, Lawrence; Saadeddin, Abid; Ho, Jin Kee; Lee, Terry; Enns, Robert; Bressler, Brian
2016-01-01
AIM To evaluate the perspective of gastroenterologists regarding the impact of fecal calprotectin (FC) on the management of patients with inflammatory bowel disease (IBD). METHODS Patients with known IBD or symptoms suggestive of IBD for whom the physician identified that FC would be clinically useful were recruited. Physicians completed an online “pre survey” outlining their rationale for the test. After receipt of the test results, the physicians completed an online “post survey” to portray their perceived impact of the test result on patient management. Clinical outcomes for a subset of patients with follow-up data available beyond the completion of the “post survey” were collected and analyzed. RESULTS Of 373 test kits distributed, 290 were returned, resulting in 279 fully completed surveys. One hundred and ninety patients were known to have IBD; 147 (77%) with Crohn’s Disease, 43 (21%) Ulcerative Colitis and 5 (2%) IBD unclassified. Indications for FC testing included: 90 (32.2%) to differentiate a new diagnosis of IBD from Irritable Bowel Syndrome (IBS), 85 (30.5%) to distinguish symptoms of IBS from IBD in those known to have IBD and 104 (37.2%) as an objective measure of inflammation. FC levels resulted in a change in management 51.3% (143/279) of the time which included a significant reduction in the number of colonoscopies (118) performed (P < 0.001). Overall, 97.5% (272/279) of the time, the physicians found the test sufficiently useful that they would order it again in similar situations. Follow-up data was available for 172 patients with further support for the clinical utility of FC provided. CONCLUSION The FC test effected a change in management 51.3% of the time and receipt of the result was associated with a reduction in the number of colonoscopies performed. PMID:27688663
An evaluation of grease type ball bearing lubricants operating in various environments
NASA Technical Reports Server (NTRS)
Mcmurtrey, E. L.
1984-01-01
Because many future spacecraft or space stations will require mechanisms to operate for long periods of time in environments which are adverse to most bearing lubricants, a series of tests has been completed to evaluate 38 grease type lubricants in R-4 size bearings in five different environments for a 1 year period. Four repetitions of each test were made to provide statistical samples. These tests were also used to select four lubricants for 5 year tests in selected environments with five repetitions of each test for statistical samples. In this completed program, 172 test sets have been completed. The three 5 year tests in: (1) continuous operation and (2) start stop operation, with both in vacuum at ambient temperatures, and (3) continuous vacuum operation at 93.3 C have been completed. In both the 1 year and 5 year tests, the best results in all environments have been obtained with a high viscosity index perfluoroalkylpolyether (PFPE) grease.
16 CFR 1203.41 - Recordkeeping requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... stability test; (14) The results of the dynamic strength of retention system test; (15) The name and... helmet tests. Complete test records shall be maintained. These records shall contain the following...; (3) The results of the tests, including the precise nature of any failures; (4) A description of the...
16 CFR 1203.41 - Recordkeeping requirements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... stability test; (14) The results of the dynamic strength of retention system test; (15) The name and... helmet tests. Complete test records shall be maintained. These records shall contain the following...; (3) The results of the tests, including the precise nature of any failures; (4) A description of the...
16 CFR 1203.41 - Recordkeeping requirements.
Code of Federal Regulations, 2012 CFR
2012-01-01
... stability test; (14) The results of the dynamic strength of retention system test; (15) The name and... helmet tests. Complete test records shall be maintained. These records shall contain the following...; (3) The results of the tests, including the precise nature of any failures; (4) A description of the...
FOCUS: Future of fecal calprotectin utility study in inflammatory bowel disease.
Rosenfeld, Greg; Greenup, Astrid-Jane; Round, Andrew; Takach, Oliver; Halparin, Lawrence; Saadeddin, Abid; Ho, Jin Kee; Lee, Terry; Enns, Robert; Bressler, Brian
2016-09-28
To evaluate the perspective of gastroenterologists regarding the impact of fecal calprotectin (FC) on the management of patients with inflammatory bowel disease (IBD). Patients with known IBD or symptoms suggestive of IBD for whom the physician identified that FC would be clinically useful were recruited. Physicians completed an online "pre survey" outlining their rationale for the test. After receipt of the test results, the physicians completed an online "post survey" to portray their perceived impact of the test result on patient management. Clinical outcomes for a subset of patients with follow-up data available beyond the completion of the "post survey" were collected and analyzed. Of 373 test kits distributed, 290 were returned, resulting in 279 fully completed surveys. One hundred and ninety patients were known to have IBD; 147 (77%) with Crohn's Disease, 43 (21%) Ulcerative Colitis and 5 (2%) IBD unclassified. Indications for FC testing included: 90 (32.2%) to differentiate a new diagnosis of IBD from Irritable Bowel Syndrome (IBS), 85 (30.5%) to distinguish symptoms of IBS from IBD in those known to have IBD and 104 (37.2%) as an objective measure of inflammation. FC levels resulted in a change in management 51.3% (143/279) of the time which included a significant reduction in the number of colonoscopies (118) performed (P < 0.001). Overall, 97.5% (272/279) of the time, the physicians found the test sufficiently useful that they would order it again in similar situations. Follow-up data was available for 172 patients with further support for the clinical utility of FC provided. The FC test effected a change in management 51.3% of the time and receipt of the result was associated with a reduction in the number of colonoscopies performed.
A new biological test of water toxicity-yeast Saccharomyces cerevisiae conductometric test.
Dolezalova, Jaroslava; Rumlova, Lubomira
2014-11-01
This new biological test of water toxicity is based on monitoring of specific conductivity changes of yeast Saccharomyces cerevisiae suspension as a result of yeast fermentation activity inhibition in toxic conditions. The test was verified on ten substances with various mechanisms of toxic effect and the results were compared with two standard toxicity tests based on Daphnia magna mobility inhibition (EN ISO 6341) and Vibrio fischeri bioluminescence inhibition (EN ISO 11348-2) and with the results of the S. cerevisiae lethal test (Rumlova and Dolezalova, 2012). The new biological test - S. cerevisiae conductometric test - is an express method developed primarily for field conditions. It is applicable in case of need of immediate information about water toxicity. Fast completion is an advantage of this test (time necessary for test completion is about 60min), the test is simple and the test organism - dried instant yeast - belongs among its biggest advantages because of its long-term storage life and broad availability. Copyright © 2014 Elsevier B.V. All rights reserved.
Larson-Williams, Linnea M; Youngblood, Amber Q; Peterson, Dawn Taylor; Zinkan, J Lynn; White, Marjorie L; Abdul-Latif, Hussein; Matalka, Leen; Epps, Stephen N; Tofil, Nancy M
2016-01-01
AIM To investigate the use of a multidisciplinary, longitudinal simulation to educate pediatric residents and nurses on management of pediatric diabetic ketoacidosis. METHODS A multidisciplinary, multiple step simulation course was developed by faculty and staff using a modified Delphi method from the Pediatric Simulation Center and pediatric endocrinology department. Effectiveness of the simulation for the residents was measured with a pre- and post-test and a reference group not exposed to simulation. A follow up post-test was completed 3-6 mo after the simulation. Nurses completed a survey regarding the education activity. RESULTS Pediatric and medicine-pediatric residents (n = 20) and pediatric nurses (n = 25) completed the simulation course. Graduating residents (n = 16) were used as reference group. Pretest results were similar in the control and intervention group (74% ± 10% vs 76% ± 15%, P = 0.658). After completing the intervention, participants improved in the immediate post-test in comparison to themselves and the control group (84% ± 12% post study; P < 0.05). The 3-6 mo follow up post-test results demonstrated knowledge decay when compared to their immediate post-test results (78% ± 14%, P = 0.761). Residents and nurses felt the interdisciplinary and longitudinal nature of the simulation helped with learning. CONCLUSION Results suggest a multidisciplinary, longitudinal simulation improves immediate post-intervention knowledge but important knowledge decay occurs, future studies are needed to determine ways to decrease this decay. PMID:27896145
16 CFR § 1203.41 - Recordkeeping requirements.
Code of Federal Regulations, 2013 CFR
2013-01-01
... stability test; (14) The results of the dynamic strength of retention system test; (15) The name and... helmet tests. Complete test records shall be maintained. These records shall contain the following...; (3) The results of the tests, including the precise nature of any failures; (4) A description of the...
77 FR 73401 - Not Applying the Mark of Inspection Pending Certain Test Results
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-10
... has completed pre-shipment review pending test results, and the results are positive, the... storage capacity at the establishment prior to an FSIS test. FSIS conducted further research on all FSIS... Inspection Service [Docket No. FSIS-2005-0044] Not Applying the Mark of Inspection Pending Certain Test...
Vibro-Acoustics Modal Testing at NASA Langley Research Center
NASA Technical Reports Server (NTRS)
Pappa, Richard S.; Pritchard, Jocelyn I.; Buehrle, Ralph D.
1999-01-01
This paper summarizes on-going modal testing activities at the NASA Langley Research Center for two aircraft fuselage structures: a generic "aluminum testbed cylinder" (ATC) and a Beechcraft Starship fuselage (BSF). Subsequent acoustic tests will measure the interior noise field created by exterior mechanical and acoustic sources. These test results will provide validation databases for interior noise prediction codes on realistic aircraft fuselage structures. The ATC is a 12-ft-long, all-aluminum, scale model assembly. The BSF is a 40-ft-long, all-composite, complete aircraft fuselage. To date, two of seven test configurations of the ATC and all three test configurations of the BSF have been completed. The paper briefly describes the various test configurations, testing procedure, and typical results for frequencies up to 250 Hz.
Clinical relevance of retrieval cues for attenuating context renewal of fear.
Culver, Najwa C; Stoyanova, Milena; Craske, Michelle G
2011-03-01
The present studies investigated if retrieval cues (reminder objects) can attenuate context renewal of fear. In Study 1, 32 participants completed exposure in one of two contexts; 1-week follow-up testing occurred in a novel or the same context. Results indicated significant renewal of fear for those tested in a novel context. In Study 2, 40 participants completed exposure in one of these contexts; half were presented with cues. One week later, all were tested in a novel context with or without cues. Results indicated weak attenuation of context renewal for participants re-presented with cues. In Study 3, 18 participants completed exposure in one of two maximally distinct contexts; all with cues. One week later, participants were tested in a novel context with or without cues. Results indicated no group differences. These findings suggest that clinical relevance of this set of cues for attenuating context renewal may be limited. Copyright © 2010 Elsevier Ltd. All rights reserved.
Final Report - LAW Envelope C Glass Formulation Testing to Increase Waste Loading, VSL-05R5900-1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kruger, Albert A.; Pegg, I. L.; Matlack, K. S.
2013-12-03
This report describes the results of testing specified by Test Plan VSL-05R5900-1 Rev.0. The work was performed in compliance with the quality assurance requirements specified in the Test Plan. Results required by the Test Plan are reported. The test results and this report have been reviewed for correctness, technical adequacy, completeness, and accuracy.
Detecting Gear Tooth Fatigue Cracks in Advance of Complete Fracture
NASA Technical Reports Server (NTRS)
Zakrajsek, James J.; Lewicki, David G.
1996-01-01
Results of using vibration-based methods to detect gear tooth fatigue cracks are presented. An experimental test rig was used to fail a number of spur gear specimens through bending fatigue. The gear tooth fatigue crack in each test was initiated through a small notch in the fillet area of a tooth on the gear. The primary purpose of these tests was to verify analytical predictions of fatigue crack propagation direction and rate as a function of gear rim thickness. The vibration signal from a total of three tests was monitored and recorded for gear fault detection research. The damage consisted of complete rim fracture on the two thin rim gears and single tooth fracture on the standard full rim test gear. Vibration-based fault detection methods were applied to the vibration signal both on-line and after the tests were completed. The objectives of this effort were to identify methods capable of detecting the fatigue crack and to determine how far in advance of total failure positive detection was given. Results show that the fault detection methods failed to respond to the fatigue crack prior to complete rim fracture in the thin rim gear tests. In the standard full rim gear test all of the methods responded to the fatigue crack in advance of tooth fracture; however, only three of the methods responded to the fatigue crack in the early stages of crack propagation.
Vision function testing for a suprachoroidal retinal prosthesis: effects of image filtering
NASA Astrophysics Data System (ADS)
Barnes, Nick; Scott, Adele F.; Lieby, Paulette; Petoe, Matthew A.; McCarthy, Chris; Stacey, Ashley; Ayton, Lauren N.; Sinclair, Nicholas C.; Shivdasani, Mohit N.; Lovell, Nigel H.; McDermott, Hugh J.; Walker, Janine G.; BVA Consortium,the
2016-06-01
Objective. One strategy to improve the effectiveness of prosthetic vision devices is to process incoming images to ensure that key information can be perceived by the user. This paper presents the first comprehensive results of vision function testing for a suprachoroidal retinal prosthetic device utilizing of 20 stimulating electrodes. Further, we investigate whether using image filtering can improve results on a light localization task for implanted participants compared to minimal vision processing. No controlled implanted participant studies have yet investigated whether vision processing methods that are not task-specific can lead to improved results. Approach. Three participants with profound vision loss from retinitis pigmentosa were implanted with a suprachoroidal retinal prosthesis. All three completed multiple trials of a light localization test, and one participant completed multiple trials of acuity tests. The visual representations used were: Lanczos2 (a high quality Nyquist bandlimited downsampling filter); minimal vision processing (MVP); wide view regional averaging filtering (WV); scrambled; and, system off. Main results. Using Lanczos2, all three participants successfully completed a light localization task and obtained a significantly higher percentage of correct responses than using MVP (p≤slant 0.025) or with system off (p\\lt 0.0001). Further, in a preliminary result using Lanczos2, one participant successfully completed grating acuity and Landolt C tasks, and showed significantly better performance (p=0.004) compared to WV, scrambled and system off on the grating acuity task. Significance. Participants successfully completed vision tasks using a 20 electrode suprachoroidal retinal prosthesis. Vision processing with a Nyquist bandlimited image filter has shown an advantage for a light localization task. This result suggests that this and targeted, more advanced vision processing schemes may become important components of retinal prostheses to enhance performance. ClinicalTrials.gov Identifier: NCT01603576.
NASA Technical Reports Server (NTRS)
Yim, John T.; Soulas, George C.; Shastry, Rohit; Choi, Maria; Mackey, Jonathan A.; Sarver-Verhey, Timothy R.
2017-01-01
The service life assessment for NASA's Evolutionary Xenon Thruster is updated to incorporate the results from the successful and voluntarily early completion of the 51,184 hour long duration test which demonstrated 918 kg of total xenon throughput. The results of the numerous post-test investigations including destructive interrogations have been assessed against all of the critical known and suspected failure mechanisms to update the life and throughput expectations for each major component. Analysis results of two of the most acute failure mechanisms, namely pit-and-groove erosion and aperture enlargement of the accelerator grid, are not updated in this work but will be published at a future time after analysis completion.
40 CFR 92.512 - Suspension and revocation of certificates of conformity.
Code of Federal Regulations, 2010 CFR
2010-07-01
... § 92.511(d), effective from the time that auditing of that locomotive or locomotive engine is completed... after the engine family is deemed to be in noncompliance. (c) If the results of testing or auditing... successful completion of testing, or auditing if applicable, on the failed locomotive or locomotive engine...
Wang, Ying-Chih; Wickstrom, Rick; Yen, Sheng-Che; Kapellusch, Jay; Grogan, Kimberly A
2017-05-10
Cross-sectional study. The WorkAbility Rate of Manipulation Test (WRMT), an adaptation of the Minnesota Manual Dexterity Test (MMDT), contains a revised board and protocols to improve its utility for therapy or fitness assessment. To describe the development and preliminary psychometric properties of WRMT. Sixty-six healthy participants completed MMDT and WRMT in a random order followed by a user experience survey. We compared tests using repeated-measures analysis of variance, test-retest reliability, and examined agreement between tests. Despite the similarities of these 2 instruments, the different administration protocols resulted in statistically different score distributions (P < .001). Results supported good test-retest reliability of WRMT (placing test ICC = 0.88-0.90 and turning test ICC = 0.68-0.82). The WRMT correlated moderately with MMDT (r = 0.81 in placing test and r = 0.44-0.57 in turning test). Bland-Altman plot showed that the differences in completion time were 3.8 seconds between placing tests and 19.6 (both hands), 0.3 (right hand), and 3.9 (left hand) seconds between turning tests. Overall, participants felt that the instruction of WRMT was easier to follow (44%) and preferred its setup, color, and depth of the test board (49%). Time required to complete 1 panel of 20 disks correlated highly with the time needed to finish a complete trial of 60 disks in both MMDT (r = 0.91-0.97) and WRMT (r = 0.88-0.95). Caution is warranted in comparing scores from these 2 test variants. 3b. Copyright © 2017 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.
Construction and validation of a population-based bone densitometry database.
Leslie, William D; Caetano, Patricia A; Macwilliam, Leonard R; Finlayson, Gregory S
2005-01-01
Utilization of dual-energy X-ray absorptiometry (DXA) for the initial diagnostic assessment of osteoporosis and in monitoring treatment has risen dramatically in recent years. Population-based studies of the impact of DXA and osteoporosis remain challenging because of incomplete and fragmented test data that exist in most regions. Our aim was to create and assess completeness of a database of all clinical DXA services and test results for the province of Manitoba, Canada and to present descriptive data resulting from testing. A regionally based bone density program for the province of Manitoba, Canada was established in 1997. Subsequent DXA services were prospectively captured in a program database. This database was retrospectively populated with earlier DXA results dating back to 1990 (the year that the first DXA scanner was installed) by integrating multiple data sources. A random chart audit was performed to assess completeness and accuracy of this dataset. For comparison, testing rates determined from the DXA database were compared with physician administrative claims data. There was a high level of completeness of this database (>99%) and accurate personal identifier information sufficient for linkage with other health care administrative data (>99%). This contrasted with physician billing data that were found to be markedly incomplete. Descriptive data provide a profile of individuals receiving DXA and their test results. In conclusion, the Manitoba bone density database has great potential as a resource for clinical and health policy research because it is population based with a high level of completeness and accuracy.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kruger, Albert A.; Joseph, I.; Muller, I. S.
This report describes the results of testing specified by the Test Plan VSL-06R6900-1 Rev 0. The work was performed in compliance with quality assurance requirements specified in the Test Plan. Results required by the Test Plan are reported. The test results and this report have been reviewed for correctness, technical adequacy, completeness, and accuracy.
Reusable Solid Rocket Motor Nozzle Joint 5 Redesign
NASA Technical Reports Server (NTRS)
Lui, R. C.; Stratton, T. C.; LaMont, D. T.
2003-01-01
Torque tension testing of a newly designed Reusable Solid Rocket Motor nozzle bolted assembly was successfully completed. Test results showed that the 3-sigma preload variation was as expected at the required input torque level and the preload relaxation were within the engineering limits. A shim installation technique was demonstrated as a simple process to fill a shear lip gap between nozzle housings in the joint region. A new automated torque system was successfully demonstrated in this test. This torque control tool was found to be very precise and accurate. The bolted assembly performance was further evaluated using the Nozzle Structural Test Bed. Both current socket head cap screw and proposed multiphase alloy bolt configurations were tested. Results indicated that joint skip and bolt bending were significantly reduced with the new multiphase alloy bolt design. This paper summarizes all the test results completed to date.
Cold Regions Logistic Supportability Testing of Wheeled, Tracked and Special Purpose Vehicles
1985-06-24
NO . Comment : 2. Have all data collected been reviewed for correctness and completeness? YES NO . Comment : 3. Were the facilities, test equipment...insufficient test planning? YES NO . Comment : 5. Were the test results compromised in any way due to test performance procedures? YES NO . Comment : 6...Were the test results compromised in any way due to test control pro- cedures? YES NO Comment : 7. Were the test results compromised in any way due to
Cold Regions Logistic Supportability Testing of Electronic, Avionic and Communications Equipment.
1985-06-20
Comment : 2. Have all data collected been reviewed for correctness and completeness? YES NO . Comment : 3. Were the facilities, test equipment...insufficient test planning? YES NO . Comment : 5. Were the test results compromised in any way due to test performance procedures? YES NO . Comment : 6. Were the...test results compromised in any way due to test control pro- cedures? YES NO Comment : 7. Were the test results compromised in any way due to data
On sample size and different interpretations of snow stability datasets
NASA Astrophysics Data System (ADS)
Schirmer, M.; Mitterer, C.; Schweizer, J.
2009-04-01
Interpretations of snow stability variations need an assessment of the stability itself, independent of the scale investigated in the study. Studies on stability variations at a regional scale have often chosen stability tests such as the Rutschblock test or combinations of various tests in order to detect differences in aspect and elevation. The question arose: ‘how capable are such stability interpretations in drawing conclusions'. There are at least three possible errors sources: (i) the variance of the stability test itself; (ii) the stability variance at an underlying slope scale, and (iii) that the stability interpretation might not be directly related to the probability of skier triggering. Various stability interpretations have been proposed in the past that provide partly different results. We compared a subjective one based on expert knowledge with a more objective one based on a measure derived from comparing skier-triggered slopes vs. slopes that have been skied but not triggered. In this study, the uncertainties are discussed and their effects on regional scale stability variations will be quantified in a pragmatic way. An existing dataset with very large sample sizes was revisited. This dataset contained the variance of stability at a regional scale for several situations. The stability in this dataset was determined using the subjective interpretation scheme based on expert knowledge. The question to be answered was how many measurements were needed to obtain similar results (mainly stability differences in aspect or elevation) as with the complete dataset. The optimal sample size was obtained in several ways: (i) assuming a nominal data scale the sample size was determined with a given test, significance level and power, and by calculating the mean and standard deviation of the complete dataset. With this method it can also be determined if the complete dataset consists of an appropriate sample size. (ii) Smaller subsets were created with similar aspect distributions to the large dataset. We used 100 different subsets for each sample size. Statistical variations obtained in the complete dataset were also tested on the smaller subsets using the Mann-Whitney or the Kruskal-Wallis test. For each subset size, the number of subsets were counted in which the significance level was reached. For these tests no nominal data scale was assumed. (iii) For the same subsets described above, the distribution of the aspect median was determined. A count of how often this distribution was substantially different from the distribution obtained with the complete dataset was made. Since two valid stability interpretations were available (an objective and a subjective interpretation as described above), the effect of the arbitrary choice of the interpretation on spatial variability results was tested. In over one third of the cases the two interpretations came to different results. The effect of these differences were studied in a similar method as described in (iii): the distribution of the aspect median was determined for subsets of the complete dataset using both interpretations, compared against each other as well as to the results of the complete dataset. For the complete dataset the two interpretations showed mainly identical results. Therefore the subset size was determined from the point at which the results of the two interpretations converged. A universal result for the optimal subset size cannot be presented since results differed between different situations contained in the dataset. The optimal subset size is thus dependent on stability variation in a given situation, which is unknown initially. There are indications that for some situations even the complete dataset might be not large enough. At a subset size of approximately 25, the significant differences between aspect groups (as determined using the whole dataset) were only obtained in one out of five situations. In some situations, up to 20% of the subsets showed a substantially different distribution of the aspect median. Thus, in most cases, 25 measurements (which can be achieved by six two-person teams in one day) did not allow to draw reliable conclusions.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Buchholz, Stuart A.
This memorandum documents laboratory thermomechanical triaxial strength testing of Waste Isolation Pilot Plant (WIPP) clean salt. The limited study completed independent, adjunct laboratory tests in the United States to assist in validating similar testing results being provided by the German facilities. The testing protocol consisted of completing confined triaxial, constant strain rate strength tests of intact WIPP clean salt at temperatures of 25°C and 100°C and at multiple confining pressures. The stratigraphy at WIPP also includes salt that has been labeled “argillaceous.” The much larger test matrix conducted in Germany included both the so-called clean and argillaceous salts. When combined,more » the total database of laboratory results will be used to develop input parameters for models, assess adequacy of existing models, and predict material behavior. These laboratory studies are also consistent with the goals of the international salt repository research program. The goal of this study was to complete a subset of a test matrix on clean salt from the WIPP undertaken by German research groups. The work was performed at RESPEC in Rapid City, South Dakota. A rigorous Quality Assurance protocol was applied, such that corroboration provides the potential of qualifying all of the test data gathered by German research groups.« less
B-52 control configured vehicles: Flight test results
NASA Technical Reports Server (NTRS)
Arnold, J. I.; Murphy, F. B.
1976-01-01
Recently completed B-52 Control Configured Vehicles (CCV) flight testing is summarized, and results are compared to analytical predictions. Results are presented for five CCV system concepts: ride control, maneuver load control, flutter mode control, augmented stability, and fatigue reduction. Test results confirm analytical predictions and show that CCV system concepts achieve performance goals when operated individually or collectively.
Analysis and Design of a Double-Divert Spiral Groove Seal
NASA Technical Reports Server (NTRS)
Zheng, Xiaoqing; Berard, Gerald
2007-01-01
This viewgraph presentation describes the design and analysis of a double spiral groove seal. The contents include: 1) Double Spiral Design Features; 2) Double Spiral Operational Features; 3) Mating Ring/Rotor Assembly; 4) Seal Ring Assembly; 5) Insert Segment Joints; 6) Rotor Assembly Completed Prototype Parts; 7) Seal Assembly Completed Prototype Parts; 8) Finite Element Analysis; 9) Computational Fluid Dynamics (CFD) Analysis; 10) Restrictive Orifice Design; 11) Orifice CFD Model; 12) Orifice Results; 13) Restrictive Orifice; 14) Seal Face Coning; 15) Permanent Magnet Analysis; 16) Magnetic Repulsive Force; 17) Magnetic Repulsive Test Results; 18) Spin Testing; and 19) Testing and Validation.
Development of a Flow Field for Testing a Boundary-Layer-Ingesting Propulsor
NASA Technical Reports Server (NTRS)
Hirt, Stefanie M.; Arend, David J.; Wolter, John D.; Johnson, Aaron
2017-01-01
In order to test embedded-propulsor technology, modifications were required of the 8x6 Supersonic Wind tunnel at NASA Glenn Research Center. The extent of the modifications required that a new tunnel calibration be completed to generate a new calibration dataset and operational procedures for the tunnel, as well as to map the boundary layer on the raised floor. This report describes the propulsor inflow that was to be simulated, documents the tunnel modifications that were required, and conveys the results of the calibration test that was completed to measure the resulting flow properties.
Study on the system-level test method of digital metering in smart substation
NASA Astrophysics Data System (ADS)
Zhang, Xiang; Yang, Min; Hu, Juan; Li, Fuchao; Luo, Ruixi; Li, Jinsong; Ai, Bing
2017-03-01
Nowadays, the test methods of digital metering system in smart substation are used to test and evaluate the performance of a single device, but these methods can only effectively guarantee the accuracy and reliability of the measurement results of a digital metering device in a single run, it does not completely reflect the performance when each device constitutes a complete system. This paper introduced the shortages of the existing test methods. A system-level test method of digital metering in smart substation was proposed, and the feasibility of the method was proved by the actual test.
Functional Testing Communication Equipment (Avionics).
1980-07-31
Yes No . Comment : 2. Were the facilities, test equipment, instrumentation, and support accommodations adequate to accomplish the test objectives...Yes No . Comment : 3. Have all data collected been reviewed for correctness and completeness? Yes No . Comment : 4. Were the test results compromised in...any way due to insufficient test planning? Yes No . Comment : 5. Were the test results compromised in any way due to test performance procedures? Yes No
40 CFR 75.60 - General provisions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... data and results of all pretest, post-test, and post-run quality-assurance checks of the reference..., application forms, designated representative signature, and petition-related test results in hardcopy to the... completing the test or within 15 days of receiving the request, whichever is later. The designated...
Tomblin, J. Bruce
2009-01-01
This study investigated the phonological processing skills of 29 children with prelingual, profound hearing loss with 4 years of cochlear implant experience. Results were group matched with regard to word-reading ability and mother’s educational level with the performance of 29 hearing children. Results revealed that it is possible to obtain a valid measure of phonological processing (PP) skills in children using CIs. They could complete rhyming tasks and were able to complete sound-based tasks using standard test materials provided by a commercial test distributor. The CI children completed tasks measuring PP, but there were performance differences between the CI users and the hearing children. The process of learning phonological awareness (PA) for the children with CIs was characterized by a longer, more protracted learning phase than their counterparts with hearing. Tests of phonological memory skills indicated that when the tasks were controlled for presentation method and response modality, there were no differences between the performance of children with CIs and their counterparts with hearing. Tests of rapid naming revealed that there were no differences between rapid letter and number naming between the two groups. Results yielded a possible PP test battery for children with CI experience. PMID:18424771
Graded Aerobic Treadmill Testing in Adolescent Traumatic Brain Injury Patients.
Cordingley, Dean M; Girardin, Richard; Morissette, Marc P; Reimer, Karen; Leiter, Jeff; Russell, Kelly; Ellis, Michael J
2017-11-01
To examine the safety and tolerability of clinical graded aerobic treadmill testing in recovering adolescent moderate and severe traumatic brain injury (TBI) patients referred to a multidisciplinary pediatric concussion program. We completed a retrospective case series of two moderate and five severe TBI patients (mean age, 17.3 years) who underwent initial Buffalo Concussion Treadmill Testing at a mean time of 71.6 days (range, 55-87) postinjury. Six patients completed one graded aerobic treadmill test each and one patient underwent initial and repeat testing. There were no complications. Five initial treadmill tests were completely tolerated and allowed an accurate assessment of exercise tolerance. Two initial tests were terminated early by the treatment team because of neurological and cardiorespiratory limitations. As a result of testing, two patients were cleared for aerobic exercise as tolerated and four patients were treated with individually tailored submaximal aerobic exercise programs resulting in subjective improvement in residual symptoms and/or exercise tolerance. Repeat treadmill testing in one patient performed after 1 month of treatment with submaximal aerobic exercise prescription was suggestive of improved exercise tolerance. One patient was able to tolerate aerobic exercise following surgery for posterior glottic stenosis. Preliminary results suggest that graded aerobic treadmill testing is a safe, well tolerated, and clinically useful tool to assess exercise tolerance in appropriately selected adolescent patients with TBI. Future prospective studies are needed to evaluate the effect of tailored submaximal aerobic exercise prescription on exercise tolerance and patient outcomes in recovering adolescent moderate and severe TBI patients.
Functional Testing Airborne Radars
1981-03-27
recorded, and presented in accordance with this TOP? Yes No Comment : 2. Were the facilities, test equipment, instrumentation, and support accommo- dations...adequate to accomplish the test objectives? Yes No Comment : 3. Have all data collected been reviewed for correctness and completeness? Yes No ... Comment : 4. Were the test results compromised in any way due to insufficient test planning? Yes No . Comment : 5. Were the test results compromised in any
The Nutating Engine-Prototype Engine Progress Report and Test Results
NASA Technical Reports Server (NTRS)
Meitner, Peter L.; Boruta, Mike
2006-01-01
A prototype of a new, internal combustion (IC) engine concept has been completed. The Nutating Engine features an internal disk nutating (wobbling) on a Z-shaped power shaft. The engine is exceedingly compact, and several times more power dense than any conventional (reciprocating or rotary) IC engine. This paper discusses lessons learned during the prototype engine's development and provides details of its construction. In addition, results of the initial performance tests of the various components, as well as the complete engine, are summarized.
Students' Conceptions of Chemical Change.
ERIC Educational Resources Information Center
Hesse, Joseph J., III; Anderson, Charles W.
1992-01-01
Presents results of intensive clinical interviews with 11 high school chemistry students representing a broad range of achievement levels as selected from 180 students who completed a written test upon completion of an instructional unit on chemical change. Results indicate that students commonly experience difficulties in chemical knowledge,…
DeBoer, D J; Hillier, A
2001-09-20
Serum-based in vitro "allergy tests" are commercially available to veterinarians, and are widely used in diagnostic evaluation of a canine atopic patient. Following initial clinical diagnosis, panels of allergen-specific IgE measurements may be performed in an attempt to identify to which allergens the atopic dog is hypersensitive. Methodology for these tests varies by laboratory; few critical studies have evaluated performance of these tests, and current inter-laboratory standardization and quality control measures are inadequate. Other areas where information is critically limited include the usefulness of these tests in diagnosis of food allergy, the effect of extrinsic factors such as season of the year on results, and the influence of corticosteroid treatment on test results. Allergen-specific IgE serological tests are never completely sensitive, nor completely specific. There is only partial correlation between the serum tests and intradermal testing; however, the significance of discrepant results is unknown and unstudied. Variation in test methodologies along with the absence of universal standardization and reporting procedures have created confusion, varying study results, and an inability to compare between studies performed by different investigators.
von Krogh, Gunn; Nåden, Dagfinn; Aasland, Olaf Gjerløw
2012-10-01
To present the results from the test site application of the documentation model KPO (quality assurance, problem solving and caring) designed to impact the quality of nursing information in electronic patient record (EPR). The KPO model was developed by means of consensus group and clinical testing. Four documentation arenas and eight content categories, nursing terminologies and a decision-support system were designed to impact the completeness, comprehensiveness and consistency of nursing information. The testing was performed in a pre-test/post-test time series design, three times at a one-year interval. Content analysis of nursing documentation was accomplished through the identification, interpretation and coding of information units. Data from the pre-test and post-test 2 were subjected to statistical analyses. To estimate the differences, paired t-tests were used. At post-test 2, the information is found to be more complete, comprehensive and consistent than at pre-test. The findings indicate that documentation arenas combining work flow and content categories deduced from theories on nursing practice can influence the quality of nursing information. The KPO model can be used as guide when shifting from paper-based to electronic-based nursing documentation with the aim of obtaining complete, comprehensive and consistent nursing information. © 2012 Blackwell Publishing Ltd.
Identification of Commercial Items Risk Factors
2003-03-01
performance measures, vendors availability of support, testing and managing organizational change . 1. Process Risk Factor: Commercial Standards Military...support, testing and managing organizational change . C. ASSESSING RESULTS Completing the questions and assessing/compiling the results should help...to performance measures, vendors availability of support, testing and managing organizational change . SECTION I Service
29 mm Diameter Target Test Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Woloshun, Keith Albert; Olivas, Eric Richard; Dale, Gregory E.
After numerous delays, the test of the 29 mm diameter target was conducted on 8/18/2017. The complete target design report, dated 8/15/2016, is reproduced below for completeness. This describes in detail the 10 disk target with varying thickness disks. The report presents and discusses the test results. In brief summary, there appears to have been multiple instrumentation errors. Measured temperatures, pressures and IR camera window temperature measurement are all suspect. All tests were done at 35 MeV, with 171 μA current, or 6 kW of beam power.
Incompleteness of Bluetooth protocol conformance test cases
NASA Astrophysics Data System (ADS)
Wu, Peng; Gao, Qiang
2001-10-01
This paper describes a formal method to verify the completeness of conformance testing, in which not only Implementation Under Test (IUT) is formalized in SDL, but also conformance tester is described in SDL so that conformance testing can be performed in simulator provided with CASE tool. The protocol set considered is Bluetooth, an open wireless communication technology. Our research results show that Bluetooth conformance test specification is not complete in that it has only limited coverage and many important capabilities defined in Bluetooth core specification are not tested. We also give a detail report on the missing test cases against Bluetooth core specification, and provide a guide on further test case generation in the future.
Wave Energy Prize - 1/50th Testing - Float Inc
Wesley Scharmen
2016-01-15
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for Float Inc. During the testing of its 1/50th-scale device, Float Inc. Berger ABAM was deemed ineligible due to the fact that they brought a device with them to test and did not ship the device by the deadline stipulated in the Wave Energy Prize Rules. Because of this, analysis, results, and judging were not completed for this team/device. This submission included files such as: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents
Highly Efficient Design-of-Experiments Methods for Combining CFD Analysis and Experimental Data
NASA Technical Reports Server (NTRS)
Anderson, Bernhard H.; Haller, Harold S.
2009-01-01
It is the purpose of this study to examine the impact of "highly efficient" Design-of-Experiments (DOE) methods for combining sets of CFD generated analysis data with smaller sets of Experimental test data in order to accurately predict performance results where experimental test data were not obtained. The study examines the impact of micro-ramp flow control on the shock wave boundary layer (SWBL) interaction where a complete paired set of data exist from both CFD analysis and Experimental measurements By combining the complete set of CFD analysis data composed of fifteen (15) cases with a smaller subset of experimental test data containing four/five (4/5) cases, compound data sets (CFD/EXP) were generated which allows the prediction of the complete set of Experimental results No statistical difference were found to exist between the combined (CFD/EXP) generated data sets and the complete Experimental data set composed of fifteen (15) cases. The same optimal micro-ramp configuration was obtained using the (CFD/EXP) generated data as obtained with the complete set of Experimental data, and the DOE response surfaces generated by the two data sets were also not statistically different.
NASA Technical Reports Server (NTRS)
Brown, David B.
1991-01-01
The results of research and development efforts of the first six months of Task 1, Phase 3 of the project are presented. The goals of Phase 3 are: (1) to further refine the rule base and complete the comparative rule base evaluation; (2) to implement and evaluate a concurrency testing prototype; (3) to convert the complete (unit-level and concurrency) testing prototype to a workstation environment; and (4) to provide a prototype development document to facilitate the transfer of research technology to a working environment. These goals were partially met and the results are summarized.
NASA Technical Reports Server (NTRS)
1976-01-01
The design, fabrication, and tests of a solid state television camera using a new charge-coupled imaging device are reported. An RCA charge-coupled device arranged in a 512 by 320 format and directly compatible with EIA format standards was the sensor selected. This is a three-phase, sealed surface-channel array that has 163,840 sensor elements, which employs a vertical frame transfer system for image readout. Included are test results of the complete camera system, circuit description and changes to such circuits as a result of integration and test, maintenance and operation section, recommendations to improve the camera system, and a complete set of electrical and mechanical drawing sketches.
Blade loss transient dynamic analysis of turbomachinery
NASA Technical Reports Server (NTRS)
Stallone, M. J.; Gallardo, V.; Storace, A. F.; Bach, L. J.; Black, G.; Gaffney, E. F.
1982-01-01
This paper reports on work completed to develop an analytical method for predicting the transient non-linear response of a complete aircraft engine system due to the loss of a fan blade, and to validate the analysis by comparing the results against actual blade loss test data. The solution, which is based on the component element method, accounts for rotor-to-casing rubs, high damping and rapid deceleration rates associated with the blade loss event. A comparison of test results and predicted response show good agreement except for an initial overshoot spike not observed in test. The method is effective for analysis of large systems.
Effects of script types of Japanese loan words on priming performance.
Hayashi, Chiyoko
2005-04-01
23 female undergraduate students (M=20 yr., 10 mo., SD=15 mo.) were given a word-fragment completion task, containing a study and nonstudy list. In the present study, the effect of orthographic familiarity (e.g., script type) of a test item on a word-fragment completion task was examined. The script types of word stimuli (Katakana and Hiragana) were manipulated between a study and test phase. Priming effect was greater when the script type was the same between a study and test phase than in the cross-script condition. Further, even if the script type of word stimulus was different between study and test phases, a significant priming effect was obtained when the test fragment was orthographically familiar. These results suggested that not only the consistency of the perceptual feature of the stimulus word between study and test phases, but also orthographic familiarity of the stimulus word in the test phase facilitated priming effect in a word-fragment completion test.
How Reliable Is Laboratory Testing?
... laboratory testing. (See Who's Who in the Lab .) Post-Analytic Activities After the test is completed, the result must be delivered in ... View Sources NOTE: This article is based on research that ... of the Lab Tests Online Editorial Review Board . This article is periodically ...
Impact of a Pharmacist-Provided Spirometry Service on Access to Results in a Primary Care Setting.
Mueller, Lisa A; Valentino, Alexa Sevin; Clark, Aaron D; Li, Junan
2018-01-01
The primary objective of this study was to determine the effect of a pharmacist-provided spirometry service within a federally qualified health center on the percentage of spirometry referrals completed with results reviewed by the ordering provider. Secondary objectives evaluated differences between internal and external referrals, medication recommendations made by the pharmacist, and revenue brought in by the service. Chart reviews were completed to determine the referral completion rates between patients who received a spirometry referral before (December 2014-September 2015) and after (January 2016-October 2016) the implementation of the pharmacy-provided spirometry service. Chart reviews were also used to determine the number and completion rate among referrals for internal and external services in the postimplementation time frame. Chart reviews also assessed medication recommendations made by the pharmacist. The results demonstrate an increase in referral completion rate from 38.1% to 47.0% ( P = .08) between the pre- and postimplementation time frames. In the postimplementation time frame, there was a statistically significant difference in the percentage of referrals completed between in-house referrals and external referrals (70.0% and 40.9%, respectively, P = .0004). Comparing clinics with and without the spirometry service, there was a statistically significant difference in the total number of spirometry referrals (1.13% and 0.59%, respectively, P < .0001) and the percent of referrals completed (0.55% and 0.27%, respectively, P = .0002). The results suggest that offering spirometry within the primary care setting helps to increase the rate of completed spirometry tests with results available to the primary care provider. Additionally, the results show that there is an increased completion rate in patients who receive an internal spirometry referral, which may be due to reduced barriers in obtaining this testing. Overall, these results demonstrate that providing spirometry in the primary care setting helps to increase spirometry results obtained and could be beneficial in other primary care settings.
Hanson, Lisa C; McBurney, Helen; Taylor, Nicholas F
2012-03-01
The purpose of this paper was to determine if the Six-minute Walk Test (6MWT) was a reliable exercise test for patients referred to cardiac rehabilitation when up to three tests were performed and to determine if test scores differed according to between-test time interval. Thirty adults aged 63 ± 7.9 years referred to cardiac rehabilitation participated in a repeated measures reliability trial. Participants completed three 6MWTs within a one-week period. Participants were randomly allocated to one of three groups: on the first day, Group A completed three walks, Group B completed two walks and Group C completed one walk. Relative reliability was expressed in a ratio (ICC(2,1) ), and absolute reliability was expressed in metres (95% confidence intervals) for group and individuals. The 6MWT demonstrated a high level of relative reliability (intraclass correlation coefficients [ICC] = 0.94) across the three walks. There was no statistically significant difference between the test scores of the three groups. However, there was an increase in distance walked from the first to the second to the third 6MWT. Absolute reliability indicated that a change of at least 44 m would be required to be interpreted as true change in a group, and at least 95 m to be interpreted as true change in an individual with 95% confidence. Three 6MWTs completed in relatively short timeframes were not sufficient for reliable results as there was an increase in the distance walked, and relatively large increases in distances would be required to be interpreted as change. It did not make any difference whether the tests were all completed on one day or over one week. This study highlighted problems that may arise when relying on reliability coefficients alone to interpret reliability. These results suggest that the 6MWT may not have sufficient reliability to be a suitable test to evaluate exercise tolerance in patients referred to cardiac rehabilitation. Copyright © 2011 John Wiley & Sons, Ltd.
Cold Regions Logistic Supportability Testing of Armament and Individual Weapons
1983-10-07
CHECKLIST 1. Have test data been collected, recorded, and presented in accordance with this TOP? YES NO Comment : 2. Have all data collected been reviewed...for correctness and completeness? YES NO Comment : 3. Were the facilities, test equipment, instrumentation, and support accommodations adequate to...test results compromised in any way due to test performance procedures? YES NO . Comment : 6. Were the test results compromised in any way due to test
Cold Regions Logistic Supportability Testing of Missiles and Rocket Systems.
1984-10-26
006 APPENDIX B - POST-TEST CHECKLIST 1. Have test data been collected, recorded, and presented in accordance with this TOP? YES NO Comment : 2. Have all...data collected been reviewed for correctness and completeness? YES_ NO Comment : 3. Were the facilities, test equipment, instrumentation, and support...YES NO Comment : 5. Were the test results compromised in any way due to test performance procedures? YES_ NO Comment : 6. Were the test results
2014 Enhanced LAW Glass Property-Composition Models, Phase 2
DOE Office of Scientific and Technical Information (OSTI.GOV)
Muller, Isabelle; Pegg, Ian L.; Joseph, Innocent
2015-10-28
This report describes the results of testing specified by the Enhanced LAW Glass Property-Composition Models, VSL-13T3050-1, Rev. 0 Test Plan. The work was performed in compliance with the quality assurance requirements specified in the Test Plan. Results required by the Test Plan are reported. The te4st results and this report have been reviewed for correctness, technical adequacy, completeness, and accuracy.
NASA Technical Reports Server (NTRS)
Lobo, Prem; Klettlinger, Jennifer; Podboy, Derek
2017-01-01
This presentation is a brief summary of the data collected under a NASAFAA partnership test campaign completed in October 2016 in the NASA CE-5 test facility. The results discussed in this presentation are gaseous (NASA) and Particle (FAA).
Wave Energy Prize - 1/50th Testing - Waveswing America
Wesley Scharmen
2016-01-22
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Waveswing America team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents Results
Serologic Screening for Herpes Simplex Virus Among University Students: A Pilot Study
Mark, Hayley; Nanda, Joy P.; Joffe, Alain; Roberts, Jessica; Rompalo, Anne; Melendez, Johan; Zenilman, Jonathan
2009-01-01
Objective The authors examined the feasibility of conducting serologic testing for the herpes simplex virus 2 (HSV-2) among university students and assessed the psychosocial impact of an HSV-2 diagnosis. Methods The authors recruited a convenience sample of 100 students (aged 18–39 years) without a history of genital herpes from 1 university between September 2004 and March 2006. Participants received HSV-2 antibody testing by Focus ELISA and Western Blot assays and completed a questionnaire that addressed psychological functioning. Twenty-eight participants completed the questionnaire again at a 3-month follow-up visit. Results The study revealed (1) low test-reliability in the student population, (2) that positive test results may cause a decline in psychological well-being, and (3) that substantial resources are required to support students with positive HSV-2 results. Conclusions Test performance, psychological impact, and availability of resources for counseling students with positive diagnoses should be considered before implementing HSV testing programs. PMID:18980884
2013-01-01
Background Little empirical data are available on the extent to which capacity-building programs in research ethics prepare trainees to apply ethical reasoning skills to the design, conduct, or review of research. A randomized controlled trial was conducted in Botswana in 2010 to assess the effectiveness of a case-based intervention using email to augment in-person seminars. Methods University faculty and current and prospective IRB/REC members took part in a semester-long training program in research ethics. Participants attended two 2-day seminars and were assigned at random to one of two on-line arms of the trial. Participants in both arms completed on-line international modules from the Collaborative Institutional Training Initiative. Between seminars, intervention-arm participants were also emailed a weekly case to analyze in response to set questions; responses and individualized faculty feedback were exchanged via email. Tests assessing ethics knowledge were administered at the start of each seminar. The post-test included an additional section in which participants were asked to identify the ethical issues highlighted in five case studies from a list of multiple-choice responses. Results were analyzed using regression and ANOVA. Results Of the 71 participants (36 control, 35 intervention) enrolled at the first seminar, 41 (57.7%) attended the second seminar (19 control, 22 intervention). In the intervention arm, 19 (54.3%) participants fully completed and 8 (22.9%) partially completed all six weekly cases. The mean score was higher on the post-test (30.3/40) than on the pre-test (28.0/40), and individual post- and pre-test scores were highly correlated (r = 0.65, p < 0.0001). Group assignment alone did not have an effect on test scores (p > 0.84), but intervention-arm subjects who completed all assigned cases answered an average of 3.2 more questions correctly on the post-test than others, controlling for pre-test scores (p = 0.003). Conclusions Completion of the case-based intervention improved respondents’ test scores, with those who completed all six email cases scoring roughly 10% better than those who failed to complete this task and those in the control arm. There was only suggestive evidence that intensive case work improved ethical issue identification, although there was limited ability to assess this outcome due to a high drop-out rate. PMID:23368699
Composite armored vehicle advanced technology demonstator
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ostberg, D.T.; Dunfee, R.S.; Thomas, G.E.
1996-12-31
Composite structures are a key technology needed to develop future lightweight combat vehicles that are both deployable and survivable. The Composite Armored Vehicle Advanced Technology Demonstrator Program that started in fiscal year 1994 will continue through 1998 to verily that composite structures are a viable solution for ground combat vehicles. Testing thus far includes material characterization, structural component tests and full scale quarter section tests. Material and manufacturing considerations, tests, results and changes, and the status of the program will be described. The structural component tests have been completed successfully, and quarter section testing is in progress. Upon completion ofmore » the critical design review, the vehicle demonstrator will be Fabricated and undergo government testing.« less
CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ted Berglund; Jeffrey T. Ranney; Carol L. Babb
2001-01-01
The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates have been completed and issued for review. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility design, equipment selection, and modification were completed during the fourth quarter. Initial pilot facility shakedown was completed during the fourth quarter. During pilot plant shakedown operations, several production batch test runs were performed. These pilot tests were coupled with laboratory testing to confirm pilot results. In initial batches of operations, cellulose to glucose conversionsmore » of 62.5% and 64.8% were observed in laboratory hydrolysis. As part of this testing, lignin dewatering was tested using laboratory and vendor-supplied filtration equipment. Dewatering tests reported moisture contents in the lignin of between 50% and 60%. Dewatering parameters and options will continue to be investigated during lignin production. After some unavoidable delays, a suitable representative supply of MSW feed material was procured. Shredding of the feed material was completed and final drying of the feed is expected to be completed by late January. Once feed drying is completed, pilot facility production will begin to produce lignin for co-fire testing. Facility modifications are expected to continue to improve facility operations and performance during the first quarter of 2001. The TVA-Colbert facility continues to make progress in evaluating the co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system continues.« less
Community pharmacists' experience with pharmacogenetic testing.
Moaddeb, Jivan; Mills, Rachel; Haga, Susanne B
2015-01-01
Appendix 1 Statements of knowledge of correct medication use Appendix 2 Statements of self-efficacy of correct medication use Appendix 3 Statements of skills of correct medication use To characterize the experiences and feasibility of offering pharmacogenetic (PGx) testing in a community pharmacy setting. Pharmacists were invited to complete a survey about PGx testing for each patient who was offered testing. If the patient consented, pharmacists were also asked to complete a follow-up survey about the process of returning PGx testing results to patients and follow-up with the prescribing provider. Community pharmacies in North Carolina from August through November 2014. Pharmacists at five community pharmacies. Patient consent for testing, time to introduce PGx testing initially and communicate results, interpretation of test results, and recommended medication changes. Of the 69 patients offered testing, 56 (81%) consented. Pre-test counseling typically lasted 1-5 minutes (81%), and most patients (55%) did not have any questions about the testing. Most pharmacists reported test results to patients by phone (84%), with discussions taking less than 1 minute (48%) or 1-5 minutes (52%). Most pharmacists believed the patients understood their results either very well (54%) or somewhat well (41%). Pharmacists correctly interpreted 47 of the 53 test results (89%). All of the incorrect interpretations were for patients with test results indicating a dosing or drug change (6/19; 32%). Pharmacists reported contacting the ordering physician for four patients to discuss results indicating a dosage or drug change. The provision of PGx services in a community pharmacy setting appears feasible, requiring little additional time from the pharmacist, and many patients seem interested in PGx testing. Additional training may be necessary to improve test result interpretation, as well as for communication with both patients and ordering physicians.
Telford, Jennifer; Gentile, Laura; Gondara, Lovedeep; McGahan, Colleen; Coldman, Andrew
2016-01-01
British Columbia undertook a colorectal cancer screening pilot program in 3 communities. Our objective was to assess the performance of 2-specimen fecal immunochemical testing in the detection of colorectal neoplasms in this population-based screening program. A prospective cohort of asymptomatic, average-risk people aged 50 to 74 years completed 2 quantitative fecal immunochemical tests every 2 years, with follow-up colonoscopy if the result of either test was positive. Participant demographics, fecal immunochemical test results, colonoscopy quality indicators and pathology results were recorded. Non-screen-detected colorectal cancer that developed in program participants was identified through review of data from the BC Cancer Registry. A total of 16 234 people completed a first round of fecal immunochemical testing, with a positivity rate of 8.6%; 5378 (86.0% of eligible participants) completed a second round before the end of the pilot program, with a positivity rate of 6.7%. Of the 1756 who had a positive test result, 1555 (88.6%) underwent colonoscopy. The detection rate of colorectal cancer was 3.5 per 1000 participants. The positive predictive value of the fecal immunochemical test was 4.9% (95% confidence interval [CI] 3.8%-6.0%) for colorectal cancer, 35.0% (95% CI 32.5%-37.2%) for high-risk polyps and 62.0% (95% CI 59.6%-64.4%) for all neoplasms. The number needed to screen was 283 to detect 1 cancer, 40 to detect 1 high-risk polyp and 22 to detect any neoplasm. Screening every 2 years with a 2-specimen fecal immunochemical test surpassed the current benchmark for colorectal cancer detection in population-based screening. This study has implications for other jurisdictions planning colorectal cancer screening programs.
Video Head Impulse Testing (vHIT) and the Assessment of Horizontal Semicircular Canal Function.
Riska, Kristal M; Murnane, Owen; Akin, Faith W; Hall, Courtney
2015-05-01
Vestibular function (specifically, horizontal semicircular canal function) can be assessed across a broad frequency range using several different techniques. The head impulse test is a qualitative test of horizontal semicircular canal function that can be completed at bedside. Recently, a new instrument (video head impulse test [vHIT]) has been developed to provide an objective assessment to the clinical test. Questions persist regarding how this test may be used in the overall vestibular test battery. The purpose of this case report is to describe vestibular test results (vHIT, rotational testing, vestibular evoked myogenic potentials, and balance and gait performance) in an individual with a 100% unilateral caloric weakness who was asymptomatic for dizziness, vertigo or imbalance. Comprehensive assessment was completed to evaluate vestibular function. Caloric irrigations, rotary chair testing, vHIT, and vestibular evoked myogenic potentials were completed. A 100% left-sided unilateral caloric weakness was observed in an asymptomatic individual. vHIT produced normal gain with covert saccades. This case demonstrates the clinical usefulness of vHIT as a diagnostic tool and indicator of vestibular compensation and functional status. American Academy of Audiology.
46 CFR 162.050-37 - Vibration test.
Code of Federal Regulations, 2011 CFR
2011-10-01
... prepared by the laboratory and must contain the test results. (b)(1) Each oil content meter and bilge alarm... amplitude must be ± [(.7)(gravity)]. (c) After completion of the tests specified in paragraph (b) of this...
46 CFR 162.050-37 - Vibration test.
Code of Federal Regulations, 2012 CFR
2012-10-01
... prepared by the laboratory and must contain the test results. (b)(1) Each oil content meter and bilge alarm... amplitude must be ±[(.7)(gravity)]. (c) After completion of the tests specified in paragraph (b) of this...
46 CFR 162.050-37 - Vibration test.
Code of Federal Regulations, 2013 CFR
2013-10-01
... prepared by the laboratory and must contain the test results. (b)(1) Each oil content meter and bilge alarm... amplitude must be ±[(.7)(gravity)]. (c) After completion of the tests specified in paragraph (b) of this...
46 CFR 162.050-37 - Vibration test.
Code of Federal Regulations, 2014 CFR
2014-10-01
... prepared by the laboratory and must contain the test results. (b)(1) Each oil content meter and bilge alarm... amplitude must be ±[(.7)(gravity)]. (c) After completion of the tests specified in paragraph (b) of this...
Resolving the Cassini/Huygens relay anomaly
NASA Technical Reports Server (NTRS)
Deutsch, L. J.
2002-01-01
A test using NASA's DSN to mimic the probe's signal was performed in 2000 and uncovered an anomaly that, unchecked, would result in nearly complete loss of the Huygens mission. This led to a suggested modification to the Cassini trajectory that will result in nearly complete data return for Huygens with minimal impact on Cassini.
Development of a fiber optic compressor blade sensor
NASA Technical Reports Server (NTRS)
Dhadwal, Harbans Singh
1995-01-01
A complete working prototype of the fiber optic blade tip sensor was first tested in the laboratory, followed by a thorough evaluation at NASA W8 Single Compressor Stage Facility in Lewis Research Center. Subsequently, a complete system with three parallel channels was fabricated and delivered to Dr. Kurkov. The final system was tested in the Subsonic Wind Tunnel Facility, in parallel with The General Electric Company's light probe system. The results at all operating speeds were comparable. This report provides a brief description of the system and presents a summary of the experimental results.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brainard, E.L.
1978-04-25
Results are presented of acceptance tests conducted on the Alternator Stator, S/N 002, for the Kilowatt Isotope Power System. These results show that the Alternator Stator, S/N 002 for the Kilowatt Isotope Power System has satisfactorily completed the testing set forth within Sundstrand Test Specification 2538. Test requirements of TS 2538 were extracted from the Kilowatt Isotope Power System, and Phase I Test Plan.
Schizotypy and impaired basic face recognition? Another non-confirmatory study.
Bell, Vaughan; Halligan, Peter
2015-12-01
Although schizotypy has been found to be reliably associated with a reduced recognition of facial affect, the few studies that have tested the association between basic face recognition abilities and schizotypy have found mixed results. This study formally tested the association in a large non-clinical sample with established neurological measures of face recognition. Two hundred and twenty-seven participants completed the Oxford-Liverpool Inventory of Feelings and Experiences schizotypy scale and completed the Famous Faces Test and the Cardiff Repeated Recognition Test for Faces. No association between any schizotypal dimension and performance on either of the facial recognition and learning tests was found. The null results can be accepted with a high degree of confidence. Further additional evidence is provided for a lack of association between schizotypy and basic face recognition deficits. © 2014 Wiley Publishing Asia Pty Ltd.
1985-05-20
APPENDIX B - POST-TEST CHECKLIST 1. Have test data been collected, recorded, and presented in accordance with this TOP? YES NO . Comment : 2. Have all...data collected been reviewed for correctness and completeness? YES NO . Comment : 3. Were the facilities, test equipment, instrumentation, and support...YES NO . Comment : 5. Were the test results compromised in any way due to test performance procedures? YES_ NO . Comment : 6. Were the test results
A modeling intervention in heart failure.
Maddison, Ralph; Prapavessis, Harry; Armstrong, Guy P; Hill, Caleb
2008-08-01
Peak oxygen uptake (VO(2)) testing is commonly used to assess chronic heart failure (CHF) patients' exercise tolerance. The test requires maximal effort; however, many participants have low confidence (self-efficacy) to perform optimally. This randomized controlled trial examined the effectiveness of a modeling intervention to increase Peak VO(2) (PVO(2)) and self-efficacy in people diagnosed with CHF. Twenty participants with a diagnosis of CHF were randomized to either an intervention (modeling DVD) or a control group. Both groups completed a measure of self-efficacy prior to performing two PVO(2) tests, each separated by 7 days. After completing the first test (T1) the intervention group watched a 10-min coping model DVD. All participants returned 1 week later (T2) to complete identical study procedures. Analysis of covariance results showed that compared with the participants in the control group, those assigned to the modeling intervention had higher PVO(2) at T2, F (1, 19) = 4.38, p = 0.05, eta (2) = 0.21 and self-efficacy, F (1, 19) = 5.80, p < 0.05, eta (2) = 0.25. Only partial support was found for change in self-efficacy mediating treatment outcome (PVO(2)). Watching a modeling video is associated with increased PVO(2) and self-efficacy. These results have implications for testing patients in a clinical setting to maximize exercise tolerance test results.
Use of Reflection-in-Action and Self-Assessment to Promote Critical Thinking Among Pharmacy Students
Gregory, Paul AM; Chiu, Stephanie
2008-01-01
Objective To examine whether self-assessment and reflection-in-action improves critical thinking among pharmacy students. Methods A 24-item standardized test of critical thinking was developed utilizing previously-validated questions. Participants were divided into 2 groups (conditions). Those in condition 1 completed the test with no interference; those in condition 2 completed the test but were prompted at specific points during the test to reflect and self-assess. Results A total of 94 undergraduate (BScPhm) pharmacy students participated in this study. Significant differences (p < 0.05) were observed between those who completed the test under condition 1 and condition 2, suggesting reflection and self-assessment may contribute positively to improvement in critical thinking. Conclusions Structured opportunities to reflect-in-action and self-assess may be associated with improvements among pharmacy students in performance of tasks related to critical thinking. PMID:18698383
Low typing endurance in keyboard workers with work-related upper limb disorder
Povlsen, Bo
2011-01-01
Objective To compare results of typing endurance and pain before and after a standardized functional test. Design A standardized previously published typing test on a standard QWERTY keyboard. Setting An outpatient hospital environment. Participants Sixty-one keyboard and mouse operating patients with WRULD and six normal controls. Main outcome measure Pain severity before and after the test, typing endurance and speed were recorded. Results Thirty-two patients could not complete the test before pain reached VAS 5 and this group only typed a mean of 11 minutes. The control group and the remaining group of 29 patients completed the test. Two-tailed student T test was used for evaluation. The endurance was significantly shorter in the patient group that could not complete the test (P < 0.00001) and the pain levels were also higher in this group both before (P = 0.01) and after the test (P = 0.0003). Both patient groups had more pain in the right than the left hand, both before and after typing. Conclusions Low typing endurance correlates statistically with more resting pain in keyboard and mouse operators with work-related upper limb disorder and statistically more pain after a standardized typing test. As the right hands had higher pain levels, typing alone may not be the cause of the pain as the left hand on a QWERTY keyboard does relative more keystrokes than the right hand. PMID:21637395
Torres-Sánchez, Carlos; Montoya-Salazar, Vanessa; Gutierrez-Pérez, Jose-Luis; Jimenez-Castellanos, Emilio
2018-01-01
Background The purpose of this study was to compare the satisfaction of patients regarding retention, stability and accumulation of particles with a randomized, double-blind crossed method in users with complete dentures with and without adhesive. Material and Methods Seventeen edentulous individuals were randomized and received new upper and lower complete dentures. After a period of adaptation, they participated in some masticatory tests and clinical revisions, after use the protheses with and without the use of two denture adhesives: Adhesive A (Fittydent, Fittydent International GmbH) and adhesive B (Corega, GlaxoSmithKline) at 0, 7 and 14 days. Satisfaction was measured immediately after each test through a survey using a VAS scale (0-10) and data were analyzed with McNemar’s test with Bonferroni correction. Results The results showed significant differences (p<.01) between the study groups with adhesive A - B and the group without adhesive, but no significant differences were found between the two stickers for any of the variables studied. Conclusions Complete denture adhesives significantly improved the satisfaction of patients because a better retention, stability and less accumulation of particles of the food substitute between the denture and the mucosa is obtained compared with non-use of complete denture adhesives. Key words:Complete dentures, patient satisfaction, denture adhesives, clinical trials. PMID:29946414
Pressure vessel burst test program - Initial program paper
NASA Technical Reports Server (NTRS)
Cain, Maurice R.; Sharp, Douglas E.; Coleman, Michael D.; Webb, Bobby L.
1990-01-01
The current status of a pressure vessel burst test program, aimed at the study of the blast waves and fragmentation characteristics of ruptured gas-filled pressure vessels, is reported. The program includes a series of test plans, each involving multiple bursts with burst pressures ranging to 7500 psig. The discussion covers the identification of concerns and hazards, application of the data generated, and a brief review of the current methods for assessing vessel safety and burst parameters. Attention is also given to pretest activities, including completed vessel and facility/instrumentation preparation and results of completed preliminary burst tests.
Wave Energy Prize - 1/50th Testing - Iowec
Wesley Scharmen
2015-12-18
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Iowec team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Oscilla Power
Wesley Scharmen
2016-01-08
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Oscilla Power team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - SEWEC
Wesley Scharmen
2015-12-11
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the SEWEC team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Principle Power
Wesley Scharmen
2016-01-08
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Principle Power team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - WECCA
Wesley Scharmen
2016-01-15
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the WECCA team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Team Flapper/Harvest
Wesley Scharmen
2015-12-18
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Team Flapper/Harvest, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Sea Potential
Wesley Scharmen
2015-12-04
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Sea Potential team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Mocean Energy
Wesley Scharmen
2016-01-08
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Mocean Energy team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - CalWave
Wesley Scharmen
2016-01-15
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the CalWave team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - AquaHarmonics
Wesley Scharmen
2016-01-15
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the AquaHarmonics team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Allergy Testing in Children With Low-Risk Penicillin Allergy Symptoms.
Vyles, David; Adams, Juan; Chiu, Asriani; Simpson, Pippa; Nimmer, Mark; Brousseau, David C
2017-08-01
Penicillin allergy is commonly reported in the pediatric emergency department (ED). True penicillin allergy is rare, yet the diagnosis results from the denial of first-line antibiotics. We hypothesize that all children presenting to the pediatric ED with symptoms deemed to be low-risk for immunoglobulin E-mediated hypersensitivity will return negative results for true penicillin allergy. Parents of children aged 4 to 18 years old presenting to the pediatric ED with a history of parent-reported penicillin allergy completed an allergy questionnaire. A prespecified 100 children categorized as low-risk on the basis of reported symptoms completed penicillin allergy testing by using a standard 3-tier testing process. The percent of children with negative allergy testing results was calculated with a 95% confidence interval. Five hundred ninety-seven parents completed the questionnaire describing their child's reported allergy symptoms. Three hundred two (51%) children had low-risk symptoms and were eligible for testing. Of those, 100 children were tested for penicillin allergy. The median (interquartile range) age at testing was 9 years (5-12). The median (interquartile range) age at allergy diagnosis was 1 year (9 months-3 years). Rash (97 [97%]) and itching (63 [63%]) were the most commonly reported allergy symptoms. Overall, 100 children (100%; 95% confidence interval 96.4%-100%) were found to have negative results for penicillin allergy and had their labeled penicillin allergy removed from their medical record. All children categorized as low-risk by our penicillin allergy questionnaire were found to have negative results for true penicillin allergy. The utilization of this questionnaire in the pediatric ED may facilitate increased use of first-line penicillin antibiotics. Copyright © 2017 by the American Academy of Pediatrics.
Weisgerber, Michael; Danduran, Michael; Meurer, John; Hartmann, Kathryn; Berger, Stuart; Flores, Glenn
2009-07-01
To evaluate Cooper 12-minute run/walk test (CT12) as a one-time estimate of cardiorespiratory fitness and marker of fitness change compared with treadmill fitness testing in young children with persistent asthma. A cohort of urban children with asthma participated in the asthma and exercise program and a subset completed pre- and postintervention fitness testing. Treadmill fitness testing was conducted by an exercise physiologist in the fitness laboratory at an academic children's hospital. CT12 was conducted in a college recreation center gymnasium. Forty-five urban children with persistent asthma aged 7 to 14 years participated in exercise interventions. A subset of 19 children completed pre- and postintervention exercise testing. Participants completed a 9-week exercise program where they participated in either swimming or golf 3 days a week for 1 hour. A subset of participants completed fitness testing by 2 methods before and after program completion. CT12 results (meters), maximal oxygen consumption ((.)Vo2max) (mL x kg(-1) x min(-1)), and treadmill exercise time (minutes). CT12 and maximal oxygen consumption were moderately correlated (preintervention: 0.55, P = 0.003; postintervention: 0.48, P = 0.04) as one-time measures of fitness. Correlations of the tests as markers of change over time were poor and nonsignificant. In children with asthma, CT12 is a reasonable one-time estimate of fitness but a poor marker of fitness change over time.
Implicit and explicit forgetting: when is gist remembered?
Dorfman, J; Mandler, G
1994-08-01
Recognition (YES/NO) and stem completion (cued: complete with a word from the list; and uncued: complete with the first word that comes to mind) were tested following either semantic or non-semantic processing of a categorized input list. Item/instance information was tested by contrasting target items from the input list with new items that were categorically related to them; gist/categorical information was tested by comparing target items semantically related to the input items with unrelated new items. For both recognition and stem completion, regardless of initial processing condition, item information decayed rapidly over a period of one week. Gist information was maintained over the same period when initial processing was semantic but only in the cued condition for completion. These results are discussed in terms of dual process theory, which postulates activation/integration of a representation as primarily relevant to implicit item information and elaboration of a representation as mainly relevant to semantic (i.e. categorical) information.
NASA Technical Reports Server (NTRS)
Kaufman, A.
1981-01-01
An integrated 5 kW power system based upon methanol fuel and a phosphoric acid fuel cell operating at about 473 K is described. Description includes test results of advanced fuel cell catalysts, a semiautomatic acid replenishment system and a completed 5 kW methanol/system reformer. The results of a preliminary system test on a reformer/stack/inverter combination are reported. An initial design for a 25 kW stack is presented. Experimental plans are outlined for data acquisition necessary for design of a 50 kW methanol/steam reformer. Activities related to complete mathematical modelling of the integrated power system, including wasteheat utilization, are described.
A complete tank test of a flying-boat hull with a pointed step -N.A.C.A. Model No. 22
NASA Technical Reports Server (NTRS)
Shoemaker, James M
1934-01-01
The results of a complete tank test of a model of a flying-boat hull of unconventional form, having a deep pointed step, are presented in this note. The advantage of the pointed-step type over the usual forms of flying-boat hulls with respect to resistance at high speeds is pointed out. A take-off example using the data from these tests is worked out, and the results are compared with those of an example in which the test data for a hull of the type in general use in the United States are applied to a flying boat having the same design specifications. A definite saving in take-off run is shown by the pointed-step type.
MacLaughlin, Kathy L; Kessler, Maya E; Komandur Elayavilli, Ravikumar; Hickey, Branden C; Scheitel, Marianne R; Wagholikar, Kavishwar B; Liu, Hongfang; Kremers, Walter K; Chaudhry, Rajeev
2018-05-01
A clinical decision support system (CDSS) for cervical cancer screening identifies patients due for routine cervical cancer screening. Yet, high-risk patients who require more frequent screening or earlier follow-up to address past abnormal results are not identified. We aimed to assess the effect of a complex CDSS, incorporating national guidelines for high-risk patient screening and abnormal result management, its implementation to identify patients overdue for testing, and the outcome of sending a targeted recommendation for follow-up. At three primary care clinics affiliated with an academic medical center, a reminder recommending an appointment for Papanicolaou (Pap) testing or Pap and human papillomavirus cotesting was sent to high-risk women aged 18 through 65 years (intervention group) identified by CDSS as overdue for testing. Historical control patients, who did not receive a reminder, were identified by CDSS 1 year before the date when reminders were sent to the intervention group. Test completion rates were compared between the intervention and control groups through a generalized estimating equation extension. Across the three sites, the average completion rate of recommended follow-up testing was significantly higher in the intervention group at 23.7% (61/257) than the completion rate at 3.3% (17/516) in the control group (p < 0.001). A CDSS with enhanced capabilities to identify high-risk women due for cervical cancer testing beyond routine screening intervals, with subsequent patient notification, has the potential to decrease cervical precancer and cancer by improving adherence to guideline-compliant follow-up and needed treatment.
Dichotomous scoring of Trails B in patients referred for a dementia evaluation.
Schmitt, Andrew L; Livingston, Ronald B; Smernoff, Eric N; Waits, Bethany L; Harris, James B; Davis, Kent M
2010-04-01
The Trail Making Test is a popular neuropsychological test and its interpretation has traditionally used time-based scores. This study examined an alternative approach to scoring that is simply based on the examinees' ability to complete the test. If an examinee is able to complete Trails B successfully, they are coded as "completers"; if not, they are coded as "noncompleters." To assess this approach to scoring Trails B, the performance of 97 diagnostically heterogeneous individuals referred for a dementia evaluation was examined. In this sample, 55 individuals successfully completed Trails B and 42 individuals were unable to complete it. Point-biserial correlations indicated a moderate-to-strong association (r(pb)=.73) between the Trails B completion variable and the Total Scale score of the Repeatable Battery for the Assessment of Neurological Status (RBANS), which was larger than the correlation between the Trails B time-based score and the RBANS Total Scale score (r(pb)=.60). As a screen for dementia status, Trails B completion showed a sensitivity of 69% and a specificity of 100% in this sample. These results suggest that dichotomous scoring of Trails B might provide a brief and clinically useful measure of dementia status.
Fasting glycaemia to simplify screening for gestational diabetes.
Ryser Rüetschi, J; Jornayvaz, F R; Rivest, R; Huhn, E A; Irion, O; Boulvain, M
2016-12-01
Recommendations in Switzerland on screening for gestational diabetes endorse the International Association of Diabetes in Pregnancy Study Group consensus. As universal testing is time consuming and glucose loading is unpleasant, the recommendations include a simplification, not performing the glucose loading in women with fasting glycaemia <4.4 mmol/l. Our objective was to evaluate the diagnostic performance of this simplified strategy, compared with the complete test, in our population with a low prevalence of gestational diabetes. We collected 2298 complete 75-g glucose tolerance tests. We simulated stopping the test, so avoiding the glucose loading and further glycaemia, if fasting glycaemia was <4.4 or ≥5.1 mmol/l. Unselected pregnant women from Geneva and Basel, at 24-28 weeks of gestation. We calculated the sensitivity, and the percentage of women who would avoid the complete test with the strategy based on fasting glycaemia. The prevalence of gestational diabetes was 10.9% in our population. Among 251 women with gestational diabetes, fasting glycaemia was ≥5.1 mmol/l in 119 women (47.4%), between 4.4 and <5.1 mmol/l in 78 women (31.1%) and <4.4 mmol/l in 54 women (21.5%). Proceeding with the complete test only in women with fasting glycaemia between 4.4 and <5.1 mmol/l will result in a sensitivity of 78.5%. This strategy would avoid glucose loading in 63.8% of women. Screening with fasting glycaemia is an attractive alternative to universal screening with the complete 75-g glucose tolerance test. This strategy is, however, slightly less sensitive than previously reported in higher-risk populations. Fasting glycaemia can be considered as an alternative to the complete test for gestational diabetes screening. © 2016 Royal College of Obstetricians and Gynaecologists.
Results of Small-scale Solid Rocket Combustion Simulator testing at Marshall Space Flight Center
NASA Technical Reports Server (NTRS)
Goldberg, Benjamin E.; Cook, Jerry
1993-01-01
The Small-scale Solid Rocket Combustion Simulator (SSRCS) program was established at the Marshall Space Flight Center (MSFC), and used a government/industry team consisting of Hercules Aerospace Corporation, Aerotherm Corporation, United Technology Chemical Systems Division, Thiokol Corporation and MSFC personnel to study the feasibility of simulating the combustion species, temperatures and flow fields of a conventional solid rocket motor (SRM) with a versatile simulator system. The SSRCS design is based on hybrid rocket motor principles. The simulator uses a solid fuel and a gaseous oxidizer. Verification of the feasibility of a SSRCS system as a test bed was completed using flow field and system analyses, as well as empirical test data. A total of 27 hot firings of a subscale SSRCS motor were conducted at MSFC. Testing of the Small-scale SSRCS program was completed in October 1992. This paper, a compilation of reports from the above team members and additional analysis of the instrumentation results, will discuss the final results of the analyses and test programs.
A Method for Calculating the Probability of Successfully Completing a Rocket Propulsion Ground Test
NASA Technical Reports Server (NTRS)
Messer, Bradley
2007-01-01
Propulsion ground test facilities face the daily challenge of scheduling multiple customers into limited facility space and successfully completing their propulsion test projects. Over the last decade NASA s propulsion test facilities have performed hundreds of tests, collected thousands of seconds of test data, and exceeded the capabilities of numerous test facility and test article components. A logistic regression mathematical modeling technique has been developed to predict the probability of successfully completing a rocket propulsion test. A logistic regression model is a mathematical modeling approach that can be used to describe the relationship of several independent predictor variables X(sub 1), X(sub 2),.., X(sub k) to a binary or dichotomous dependent variable Y, where Y can only be one of two possible outcomes, in this case Success or Failure of accomplishing a full duration test. The use of logistic regression modeling is not new; however, modeling propulsion ground test facilities using logistic regression is both a new and unique application of the statistical technique. Results from this type of model provide project managers with insight and confidence into the effectiveness of rocket propulsion ground testing.
Nursing students' mathematic calculation skills.
Rainboth, Lynde; DeMasi, Chris
2006-12-01
This mixed method study used a pre-test/post-test design to evaluate the efficacy of a teaching strategy in improving beginning nursing student learning outcomes. During a 4-week student teaching period, a convenience sample of 54 sophomore level nursing students were required to complete calculation assignments, taught one calculation method, and mandated to attend medication calculation classes. These students completed pre- and post-math tests and a major medication mathematic exam. Scores from the intervention student group were compared to those achieved by the previous sophomore class. Results demonstrated a statistically significant improvement from pre- to post-test and the students who received the intervention had statistically significantly higher scores on the major medication calculation exam than did the students in the control group. The evaluation completed by the intervention group showed that the students were satisfied with the method and outcome.
Honey bee foraging preferences, effects of sugars, and fruit fly toxic bait components.
Mangan, Robert L; Moreno, Aleena Tarshis
2009-08-01
Field tests were carried out to evaluate the repellency of the Dow AgroSciences fruit fly toxic bait GF-120 (NF Naturalyte) to domestic honey bees (Apis mellifera L.). GF-120 is an organically registered attractive bait for tephritid fruit flies composed of spinosad, hydrolyzed protein (Solulys), high-fructose corn syrup (ADM CornSweet 42 high-fructose corn syrup, referred to as invertose sugar or invertose here), vegetable oils, adjuvants, humectants, and attractants. Tests were carried out with non-Africanized honey bees in February and March 2005 and 2007 during periods of maximum hunger for these bees. In all tests, bees were first trained to forage from plates of 30% honey-water (2005) or 30% invertose (2007). In 2005 bees were offered choices between honey-water and various bait components, including the complete toxic bait. In 2007, similar tests were performed except bees were attracted with 30% invertose then offered the bait components or complete bait as no-choice tests. Initially, the 2005 tests used all the components of GF-120 except the spinosad as the test bait. After we were convinced that bees would not collect or be contaminated by the bait, we tested the complete GF-120. Behavior of the bees indicated that during initial attraction and after switching the baits, the bait components and the complete bait were repellent to honey bees, but the honey-water remained attractive. Invertose was shown to be less attractive to bees, addition of Solulys eliminated almost all bee activity, and addition of ammonium acetate completely eliminated feeding in both choice and no-choice tests. These results confirm previous tests showing that bees do not feed on GF-120 and also show that honey bees are repelled by the fruit fly attractant components of the bait in field tests.
Preparatory Drilling Test on Martian Target Windjana
2014-04-30
NASA Curiosity Mars rover completed a shallow mini drill test April 29, 2014, in preparation for full-depth drilling at a rock target called Windjana. The hole results from the test is 0.63 inch across and about 0.8 inch deep.
Bares, Sara; Sandkovsky, Uriel
2017-01-01
Abstract Background Most of the care of HIV-infected patients is now provided in the clinic where there is less time for bedside teaching than in the inpatient setting. We sought to augment the clinical experience by developing an HIV-focused e-learning flipped classroom curriculum in our ID fellowship program. Methods Six e-learning modules were developed using Articulate Storyline. Topics included: HIV Diagnosis, Evaluation of the HIV-infected Patient, When to Start Antiretroviral Therapy, What to Start, HIV Resistance, and HIV Drug-Drug Interactions. Modules were made available 1 week in advance, lasted 20 minutes, and included interactive questions. Class time was spent discussing clinical cases related to the module. The IDSA “HIV Medicine in Clinical Practice” exam and pre and post-course surveys were administered to measure changes in both objective and self-perceived knowledge before and after completion of the curriculum. Wilcoxon-signed rank test was used to compare test results between the 2 periods. Results Seven fellows participated in the curriculum and 10 fellows completed the pre and post-tests (3 fellows tested only with pretest as they were finishing fellowship, 4 fellows took both pre and post- test, and 3 fellows only took the post-test). Overall scores between pre-and post-test were not significantly different between pooled pre- and post-test results (7 fellows took each test) (P = 0.8). Among the 4 fellows who completed both tests, there was a trend to improved scores (P = 0.06). 7 of 7 fellows completed the pre- and post-curriculum surveys. All agreed or strongly agreed that the flipped classroom model enhanced their learning of the material and self-perceived knowledge improved in all assessed areas following participation in the curriculum (see Figure). Conclusion The introduction of the e-learning modules in a flipped classroom format was well received by fellows and allowed for better preparation and discussion of HIV-related topics. Although pre-and post-test results were unchanged, self-perceived confidence in clinical skills improved for all fellows. The flipped classroom might be a promising method to enhance HIV-focused clinical education for fellows. Disclosures All authors: No reported disclosures.
HIV risk behavior before and after HIV counseling and testing in jail: a pilot study.
Beckwith, Curt G; Liu, Tao; Bazerman, Lauri B; DeLong, Allison K; Desjardins, Simon F; Poshkus, Michael M; Flanigan, Timothy P
2010-04-01
Jail incarceration represents an opportunity to deliver HIV counseling and testing (C&T) services to persons at increased risk of infection. However, jails can be chaotic with rapid turnover of detainees. We conducted a pilot study to investigate the feasibility of comparing the effect of different approaches to HIV C&T in jail on subsequent HIV risk behaviors among persons testing HIV negative. Consecutive cohorts of newly incarcerated jail detainees were recruited with 132 subjects completing standard HIV C&T as per jail protocol and 132 subjects completing rapid testing with an individualized counseling session. Risk behavior was assessed and compared at baseline and 6 weeks after jail release. Among the 264 male participants, preincarceration substance use and sexual risk were common. The follow-up visit was completed by 59% of eligible participants. There were no differences in postrelease HIV risk behavior between the 2 arms but there was an overall decrease in risk behavior after jail release for the cohort. In addition, all participants in the rapid arm received rapid HIV test results compared with participants receiving 28% of conventional test results. Jail incarceration represents an important public health opportunity to deliver HIV C&T. This study demonstrated (1) feasibility in delivering rapid HIV testing combined with individualized counseling to jail detainees, (2) improved test result delivery rates, and (3) success with evaluating risk behaviors during the transition from jail to the community. Further research is needed to determine the optimal approach to HIV C&T in jail with the goal of increasing awareness of HIV serostatus and decreasing HIV risk behavior.
Test of understanding of vectors: A reliable multiple-choice vector concept test
NASA Astrophysics Data System (ADS)
Barniol, Pablo; Zavala, Genaro
2014-06-01
In this article we discuss the findings of our research on students' understanding of vector concepts in problems without physical context. First, we develop a complete taxonomy of the most frequent errors made by university students when learning vector concepts. This study is based on the results of several test administrations of open-ended problems in which a total of 2067 students participated. Using this taxonomy, we then designed a 20-item multiple-choice test [Test of understanding of vectors (TUV)] and administered it in English to 423 students who were completing the required sequence of introductory physics courses at a large private Mexican university. We evaluated the test's content validity, reliability, and discriminatory power. The results indicate that the TUV is a reliable assessment tool. We also conducted a detailed analysis of the students' understanding of the vector concepts evaluated in the test. The TUV is included in the Supplemental Material as a resource for other researchers studying vector learning, as well as instructors teaching the material.
9 CFR 51.26 - Record of tests.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Record of tests. 51.26 Section 51.26... each animal. The claimant must provide any information necessary to complete the form. The test record must include the type of test and the test results for each animal. It must also include the individual...
40 CFR 89.509 - Calculation and reporting of test results.
Code of Federal Regulations, 2014 CFR
2014-07-01
... applicable emission standard expressed to one additional significant figure. This procedure has been... additional significant figure. (c) Within five working days after completion of testing of all engines...
ADVANCED CUTTINGS TRANSPORT STUDY
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stefan Miska; Nicholas Takach; Kaveh Ashenayi
2004-01-31
Final design of the mast was completed (Task 5). The mast is consisting of two welded plate girders, set next to each other, and spaced 14-inches apart. Fabrication of the boom will be completed in two parts solely for ease of transportation. The end pivot connection will be made through a single 2-inch diameter x 4 feet-8 inch long 316 SS bar. During installation, hard piping make-ups using Chiksan joints will connect the annular section and 4-inch return line to allow full movement of the mast from horizontal to vertical. Additionally, flexible hoses and piping will be installed to isolatemore » both towers from piping loads and allow recycling operations respectively. Calibration of the prototype Foam Generator Cell has been completed and experiments are now being conducted. We were able to generate up to 95% quality foam. Work is currently underway to attach the Thermo-Haake RS300 viscometer and install a view port with a microscope to measure foam bubble size and bubble size distribution. Foam rheology tests (Task 13) were carried out to evaluate the rheological properties of the proposed foam formulation. After successful completion of the first foam test, two sets of rheological tests were conducted at different foam flow rates while keeping other parameters constant (100 psig, 70F, 80% quality). The results from these tests are generally in agreement with the previous foam tests done previously during Task 9. However, an unanticipated observation during these tests was that in both cases, the frictional pressure drop in 2 inch pipe was lower than that in the 3 inch and 4 inch pipes. We also conducted the first foam cuttings transport test during this quarter. Experiments on aerated fluids without cuttings have been completed in ACTF (Task 10). Gas and liquid were injected at different flow rates. Two different sets of experiments were carried out, where the only difference was the temperature. Another set of tests was performed, which covered a wide range of pressure and temperature. Several parameters were measured during these tests including differential pressure and mixture density in the annulus. Flow patterns during the aerated fluids test have been observed through the view port in the annulus and recorded by a video camera. Most of the flow patterns were slug flow. Further increase in gas flow rate changed the wavy flow pattern to slug flow. At this stage, all of the planned cuttings transport tests have been completed. The results clearly show that temperature significantly affects the cuttings transport efficiency of aerated muds, in addition to the liquid flow rate and gas liquid ratio (GLR). Since the printed circuit board is functioning (Task 11) with acceptable noise level we were able to conduct several tests. We used the newly designed pipe test section to conduct tests. We tested to verify that we can distinguish between different depths of sand in a static bed of sand in the pipe section. The results indicated that we can distinguish between different sand levels. We tested with water, air and a mix of the two mediums. Major modifications (installation of magnetic flow meter, pipe fittings and pipelines) to the dynamic bubble characterization facility (DTF, Task 12) were completed. An Excel program that allows obtaining the desired foam quality in DTF was developed. The program predicts the foam quality by recording the time it takes to pressurize the loop with nitrogen.« less
Wagner, Karin N; Nagaraja, Haikady; Allain, Dawn C; Quick, Adam; Kolb, Stephen; Roggenbuck, Jennifer
2017-06-01
Although genetic testing for amyotrophic lateral sclerosis (ALS) is widely available, it is unknown what proportion of patients with ALS have access to genetic counseling and testing, and patient attitudes towards ALS genetic testing have not been studied. We conducted a national survey of ALS patients enrolled in the Agency for Toxic Substances and Disease Registry, which consisted of multiple choice questions and two 12 item Likert scale series assessing respondents' experience with and attitude toward genetic testing. The survey had an 8 % response rate, with 449 completed responses. Genetic testing was offered to 33.4 % and completed by 67.1 % of those offered. A minority of respondents (12.5 %) saw a genetic counselor, and were much more likely to be offered genetic testing (p = 0.0001). Respondents with a family history of ALS (8.4 %) were more likely to be offered testing (p = 0.0001) and complete testing (p = 0.05). Respondents with a family history of ALS were more likely to report a favorable attitude towards genetic testing (p = 0.0003), as were respondents who saw a genetic counselor (p = 0.02). The majority of respondents (82.7 %) felt that genetic testing should be offered to all patients with ALS. Our results indicate that ALS patients may have limited access to genetic testing, but perceive benefit from this service. Development of practice guidelines for genetic testing in ALS, to include the routine offer of genetic counseling, may result in broader and more consistent access to these services.
20V, 40 Ah Lithium Ion Polymer Battery for the Spacesuit
NASA Technical Reports Server (NTRS)
Darcy, Eric; Wilburn, Monique; Hall, Dan; Roth, Peter; Das Gupta, Sankar; Jacobs, Jim; Bhola, Rakesh; Milicic, Gordan; Vandemeer, Dave
2006-01-01
Objective: Consider a new battery design for EMU. Results: a) Electrovaya s aerospace cell production line is improving, but must further improve to achieve acceptable reliability; b) Completed functional, vibration, and thermal cycling of LIB; c) So far, electrical safety tests have produced good results; d) Completed functional, vibration, thermal cycling, power quality and EMI of LIB Charger; e) Completed CDR on 9/23/04; and f) Manufacturing Readiness Review for flight cell/battery production scheduled for Dec 04.
Ground Testing of a 10 K Sorption Cryocooler Flight Experiment (BETSCE)
NASA Technical Reports Server (NTRS)
Bard, S.; Wu, J.; Karlmann, P.; Cowgill, P.; Mirate, C.; Rodriguez, J.
1994-01-01
The Brilliant Eyes Ten-Kelvin Sorption Cryocooler Experiment (BETSCE) is a Space Shuttle side-wall-mounted flight experiment designed to demonstrate 10 K sorption cryocooler technology in a space environment. The BETSCE objectives are to: (1) provide a thorough end-to-end characterization and space performance validation of a complete, multistage, automated, closed-cycle hydride sorption cryocooler in the 10 to 30 K temperature range, (2) acquire the quantitative microgravity database required to provide confident engineering design, scaling, and optimization, (3) advance the enabling technologies and resolve integration issues, and (4) provide hardware qualification and safety verification heritage. BETSCE ground tests were the first-ever demonstration of a complete closed-cycle 10 K sorption cryocooler. Test results exceeded functional requirements. This paper summarizes functional and environmental ground test results, planned characterization tests, important development challenges that were overcome, and valuable lessons-learned.
Wave Energy Prize - 1/50th Testing - M3 Wave
Wesley Scharmen
2016-01-08
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the M3 Wave team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - RTI Wave Power
Wesley Scharmen
2015-12-18
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the RTI Wave Power team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Atlas Ocean Systems
Wesley Scharmen
2015-12-04
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Atlas Ocean Systems team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Evaluations of indoor noise criteria systems based on human response
NASA Astrophysics Data System (ADS)
Bowden, Erica E.; Wang, Lily M.
2005-09-01
The goal of this research is to examine human response to background noise, and relate results to indoor noise criteria. In previous work by the authors, subjects completed perception surveys, typing tasks, and proofreading tasks under typical heating, ventilating, and air-conditioning (HVAC) noise conditions. Results were correlated with commonly used indoor noise criteria systems including noise criteria (NC), room criteria (RC) and others. The findings suggested that the types of tasks used and the length of exposure can impact the results. To examine these two issues, the authors conducted a new study in which each test subject completed 38 total hours of testing over multiple days. Subjects were exposed to several background noise exposures over 20, 40, 80, and 240 minute trials. During the trials, subjects completed a variety of performance tasks and answered questions about their perception of the noise, the thermal environment, and various other factors. Findings from this study were used to determine optimum testing conditions for on-going research examining the effects of tonal or fluctuating background noise on performance, annoyance, and spectral perception. Results are being used to evaluate the effectiveness of commonly used indoor noise criteria systems. [Work supported by INCE and ASHRAE.
32 CFR 634.11 - Administrative due process for suspensions and revocations.
Code of Federal Regulations, 2011 CFR
2011-07-01
..., military or civilian police report of apprehension, chemical test results if completed, refusal to consent... preliminary breath tests results, and other pertinent evidence. Immediate suspension should not be based... pre-determined by the final action authority. (6) For civilian personnel, written notice of suspension...
32 CFR 634.11 - Administrative due process for suspensions and revocations.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., military or civilian police report of apprehension, chemical test results if completed, refusal to consent... preliminary breath tests results, and other pertinent evidence. Immediate suspension should not be based... pre-determined by the final action authority. (6) For civilian personnel, written notice of suspension...
32 CFR 634.11 - Administrative due process for suspensions and revocations.
Code of Federal Regulations, 2012 CFR
2012-07-01
..., military or civilian police report of apprehension, chemical test results if completed, refusal to consent... preliminary breath tests results, and other pertinent evidence. Immediate suspension should not be based... pre-determined by the final action authority. (6) For civilian personnel, written notice of suspension...
Scale-Up of an Human Papillomavirus Testing Implementation Program in El Salvador.
Cremer, Miriam; Maza, Mauricio; Alfaro, Karla; Morales Velado, Mario; Felix, Juan; Castle, Philip E; Kim, Jane; Gage, Julia C
2017-01-01
The Cervical Cancer Prevention in El Salvador is a demonstration project to introduce a lower-cost human papillomavirus (HPV)-DNA test into a public sector project. Started in October 2012, The Cervical Cancer Prevention in El Salvador consists of 3 phases and will ultimately screen 30,000 women. Results of phase 2 of the project are presented. The objective of this project was to compare colposcopy and noncolposcopy-based management for HPV-positive women. In phase 2, a total of 8,050 women, aged 30 to 49 years, were screened; 6,761 provided both self- and provider-collected specimens and 1,289 provided only provider-testing specimens. HPV results from self-collected specimens were not used in clinical management decisions. Women with provider-collected HPV-positive results were treated based on the strategy assigned to their community; the strategy was colposcopy management (CM) or screen-and-treat (ST) management if they were cryotherapy eligible or colposcopy if not eligible. Outcomes were assessed 6 months after screening. Overall, 489 (12.3%) of 3,963 women receiving CM and 465 (11.4%) of 4,087 women receiving ST tested HPV positive. In the CM cohort, 216 (44.2%) of 489 completed their intervention (203 treated, 11 diagnosed negative, 2 pregnant). In the ST cohort, 411 (88.4%) of 465 completed their intervention (407 treated, 2 diagnosed negative, 1 pregnant). Overall agreement between HPV test results from self-collected and provider-collected specimens was 93.7%, with a κ value of 0.70 (95% CI = 0.68-0.73). Human papillomavirus testing with ST management resulted in an approximately twice completion rate compared with CM management. Agreement between self- and provider-based sampling was good and might be used to extend screening to women in areas that are more difficult to reach.
SITE project. Phase 1: Continuous data bit-error-rate testing
NASA Technical Reports Server (NTRS)
Fujikawa, Gene; Kerczewski, Robert J.
1992-01-01
The Systems Integration, Test, and Evaluation (SITE) Project at NASA LeRC encompasses a number of research and technology areas of satellite communications systems. Phase 1 of this project established a complete satellite link simulator system. The evaluation of proof-of-concept microwave devices, radiofrequency (RF) and bit-error-rate (BER) testing of hardware, testing of remote airlinks, and other tests were performed as part of this first testing phase. This final report covers the test results produced in phase 1 of the SITE Project. The data presented include 20-GHz high-power-amplifier testing, 30-GHz low-noise-receiver testing, amplitude equalization, transponder baseline testing, switch matrix tests, and continuous-wave and modulated interference tests. The report also presents the methods used to measure the RF and BER performance of the complete system. Correlations of the RF and BER data are summarized to note the effects of the RF responses on the BER.
NONPARAMETRIC MANOVA APPROACHES FOR NON-NORMAL MULTIVARIATE OUTCOMES WITH MISSING VALUES
He, Fanyin; Mazumdar, Sati; Tang, Gong; Bhatia, Triptish; Anderson, Stewart J.; Dew, Mary Amanda; Krafty, Robert; Nimgaonkar, Vishwajit; Deshpande, Smita; Hall, Martica; Reynolds, Charles F.
2017-01-01
Between-group comparisons often entail many correlated response variables. The multivariate linear model, with its assumption of multivariate normality, is the accepted standard tool for these tests. When this assumption is violated, the nonparametric multivariate Kruskal-Wallis (MKW) test is frequently used. However, this test requires complete cases with no missing values in response variables. Deletion of cases with missing values likely leads to inefficient statistical inference. Here we extend the MKW test to retain information from partially-observed cases. Results of simulated studies and analysis of real data show that the proposed method provides adequate coverage and superior power to complete-case analyses. PMID:29416225
Impact of DNA testing for early-onset familial Alzheimer disease and frontotemporal dementia.
Steinbart, E J; Smith, C O; Poorkaj, P; Bird, T D
2001-11-01
DNA testing of persons at risk for hereditary, degenerative neurologic diseases is relatively new. Only anecdotal reports of such testing in familial Alzheimer disease (FAD) exist, and little is know about the personal and social impact of such testing. In a descriptive, observational study, individuals at 50% risk for autosomal dominant, early-onset FAD or frontotemporal dementia with parkinsonism linked to chromosome 17 underwent DNA testing for the genetic mutations previously identified in affected family members. Individuals were followed up for (1/2) to 3 years and were interviewed regarding attitudes toward the testing process and the impact of the results. Twenty-one (8.4%) of 251 persons at risk for FAD or frontotemporal dementia requested genetic testing. The most common reasons for requesting testing were concern about early symptoms of dementia, financial or family planning, and relief from anxiety. Twelve individuals had positive DNA test results, and 6 of these had early symptoms of dementia; 8 had negative results; and 1 has not yet received results. Of 14 asymptomatic individuals completing testing, 13 believed the testing was beneficial. Two persons reported moderate anxiety and 1 reported moderate depression. As expected, persons with negative test results had happier experiences overall, but even they had to deal with ongoing anxiety and depression. Thus far, there have been no psychiatric hospitalizations, suicide attempts, or denials of insurance. Genetic testing in early-onset FAD and frontotemporal dementia can be completed successfully. Most individuals demonstrate effective coping skills and find the testing to be beneficial, but long-term effects remain unknown.
Fabrication and test of inorganic/organic separators. [for silver zinc batteries
NASA Technical Reports Server (NTRS)
Smatko, J. S.
1974-01-01
Completion of testing and failure analysis of MDC 40 Ahr silver zinc cells containing largely inorganic separators was accomplished. The results showed that the wet stand and cycle life objectives of the silver zinc cell development program were accomplished. Building, testing and failure analysis of two plate cells employing three optimum separators selected on the basis of extensive screening tests, was performed. The best separator material as a result of these tests was doped calcium zirconate.
NASA Technical Reports Server (NTRS)
Stoecklin, R. L.
1976-01-01
A total of 114 spoiler units were fabricated in a production shop environment, utilizing three graphite epoxy material systems. Production planning paper was generated for each spoiler unit to completely document each production step of each spoiler unit. The graphite epoxy skins were laid up on production tooling using both mechanical and hand layup techniques. Inspection techniques utilized MRB type assessment in the abscence of quality requirements. Each completed spoiler was subjected to ultrasonic inspection utilizing a multicolor recording system that documented each inspection result. In addition, one static test spoiler was sectioned after the test to examine the adhesive filleting to the honeycomb core. Visual examination of the cured adhesives showed excellent results.
DOE Office of Scientific and Technical Information (OSTI.GOV)
HAMMERS, J.S.
The purpose of the test was to verify that the AN Tank Farm B Pit Leak Detector components are functionally integrated and operate in accordance with engineering design specifications. The Acceptance Test Procedure HNF-4646,241-AN-B-Pit Leak Detection ANB-WT-LDSTA-231 was conducted between 26 June and 02 July 1999 at the 200E AN Tank Farm. The test has been completed with no open test exceptions. The test was conducted prior to final engineering ''as built'' activities being completed this had no impact on the procedure or test results. All components, identified in the procedure were found to be labeled and identified as writtenmore » in the procedure.« less
The Effects of Eccentric, Velocity-Based Training on Strength and Power in Collegiate Athletes
DOLEZAL, SAMANTHA M.; FRESE, DEREK L.; LLEWELLYN, TAMRA L.
2016-01-01
The purpose of this study was to determine if combining velocity-based training with eccentric focus (VEB) and velocity-based training (VBT) results in power and strength gains. Nineteen men and women collegiate track and field athletes participated in this study. The subjects completed a 12-week intervention with either a VEB program or a VBT program. To determine the effectiveness of each program, the subjects completed four exercise tests before and after the training period: vertical jump, medicine ball put test, 1RM projected bench press and 1RM projected squat. There were no significant differences between the VBT results and the VEB results. However, there were significant improvements between the pre-test and post-test measures for each group. There were increases in 1RM projected squat for VEB men, VBT men, and VBT women. There were also significant improvements in the VEB male vertical jump and medicine ball put test pre- to post-intervention. For track and field athletes, both programs may result in strength and power gains, however, the results cannot be used to conclude that one resistance training program is superior. PMID:27990226
The Effects of Eccentric, Velocity-Based Training on Strength and Power in Collegiate Athletes.
Dolezal, Samantha M; Frese, Derek L; Llewellyn, Tamra L
2016-01-01
The purpose of this study was to determine if combining velocity-based training with eccentric focus (VEB) and velocity-based training (VBT) results in power and strength gains. Nineteen men and women collegiate track and field athletes participated in this study. The subjects completed a 12-week intervention with either a VEB program or a VBT program. To determine the effectiveness of each program, the subjects completed four exercise tests before and after the training period: vertical jump, medicine ball put test, 1RM projected bench press and 1RM projected squat. There were no significant differences between the VBT results and the VEB results. However, there were significant improvements between the pre-test and post-test measures for each group. There were increases in 1RM projected squat for VEB men, VBT men, and VBT women. There were also significant improvements in the VEB male vertical jump and medicine ball put test pre- to post-intervention. For track and field athletes, both programs may result in strength and power gains, however, the results cannot be used to conclude that one resistance training program is superior.
Comparing Postsecondary Marketing Student Performance on Computer-Based and Handwritten Essay Tests
ERIC Educational Resources Information Center
Truell, Allen D.; Alexander, Melody W.; Davis, Rodney E.
2004-01-01
The purpose of this study was to determine if there were differences in postsecondary marketing student performance on essay tests based on test format (i.e., computer-based or handwritten). Specifically, the variables of performance, test completion time, and gender were explored for differences based on essay test format. Results of the study…
A pilot study of rapid hepatitis C virus testing in the Rhode Island Department of Corrections.
Beckwith, Curt G; Kurth, Ann E; Bazerman, Lauri B; Patry, Emily J; Cates, Alice; Tran, Liem; Noska, Amanda; Kuo, Irene
2016-03-01
The correctional population bears a heavy burden of hepatitis C virus (HCV) infection necessitating expansion of HCV testing and treatment opportunities. Rapid HCV testing provides point-of-care antibody results and may be ideal for correctional facilities, particularly jails, where persons are often incarcerated for short periods of time, yet feasibility has not been established. We conducted a pilot study of a rapid HCV testing algorithm among short-term inmates with unknown HCV status. Participants completed a questionnaire, viewed an informational video and underwent rapid HCV testing and confirmatory testing, when indicated. Persons with chronic infection were referred to community care after release. Baseline characteristics, risk behaviors, test results and linkage were examined by descriptive analyses. Two hundred and fifty-two inmates were enrolled and 249 completed all study activities. Twenty-five participants (10%) had reactive rapid tests and 23 (92%) completed confirmatory testing. 15/23 (65%) had detectable HCV RNA, but only 4 linked to care after release. Persons with reactive HCV tests were more likely to be White (P = 0.01) and to have ever injected (P < 0.0001) and/or recently injected (P < 0.0001) drugs. Rapid HCV testing within jails is feasible, identifies previously unrecognized cases of HCV infection, and implementation should be considered. Low rates of linkage to care after release remain a barrier to care. © The Author 2015. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Wave Energy Prize - 1/50th Testing - Advanced Ocean Energy @ VT
Wesley Scharmen
2016-01-29
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the for the Advanced Ocean Energy @VT team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
Wave Energy Prize - 1/50th Testing - Super Watt Wave Catcher Barge Team
Wesley Scharmen
2015-12-04
This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Super Watt Wave Catcher Barge team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (summarized results)
ERIC Educational Resources Information Center
Pierangelo, Roger; Giuliani, George
This manual is a guide to the special education diagnostic process and covers the various stages of evaluation, interpretation, diagnosis, prescription, and remediation. Test information includes: explanations of the most commonly used diagnostic tests, coverage of the areas measured by each test, interpretation of test patterns for commonly used…
630A MARITIME NUCLEAR STEAM GENERATOR. Progress Report No. 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1962-07-31
Work on the 630A Maritime Nuclear Steam Generator Scoping Study is summarized. The objective of the program is to establish a specific 630A configuration and to develop specifications for components and test equipment. During the period, work was initiated in critical experiment design and fabrication, additional fuel and materials investigations, boiler-test design and fabrication; blower studies; design of component tests; nuclear, thermodynamic, mechanical and safety analysis, and test facility and equipment studies. Design of the critical experiment mockup and test equipment was completed and fabrication of the parts is approximately 50% complete. A rough draft of the critical experiment hazardsmore » report was completed. A fuel test in the ORR completed 876.5 hr of testing out of a planned 2200-hr test without indication of failure. The burnup was equivalent to about 6000 hr of 630A operation. Damage to the capsule during refueling of the ORR caused termination of the test. The design of an MTR fuel-burnup test was completed and fabrication of the sample initiated. Ni-Cr fuel sheet and cladding stock are being tested for creep and oxidation properties at temperatures up to 1750 deg F and have accumulated times up to 5000 hr; no failures have occurred. These tests are continuing. Specimens of Ni-Cr were fabricated and will be tested to determine the effect of neutron irradiation. Cycle operating conditions with 120O deg F reactor-discharge-air temperature were studied and found to be acceptable for the proposed maritime application. Increases in cycle efficiency above 30.2% appear to be possible and practical. Studies during the period indicate that an acceptable power distribution can be maintained through the life of the reactor and the maximum hot spot temperature and maximum burnup location would not coincide. Specifications for the fuel loading of the critical experiment are being prepared. Study of the pressure vessel resulted in selection of 304 SS. Containment studies indfcated the practicality of designing the shield tank outer shell as part of the containment vessel. A blower scoping study subcontract was completed. The study verified the feasibility of the main and afterblower concept. Alternate shaft-seal designs were proposed. The design of a performance test for the two seal types has been initiated. The design of the boiler test from which control characteristics will be determined was completed and fabrication started. The decision was made that the Low Power Test Facility (LPTF) will be the site used for the critical experiment. A preliminary study of the power test facility requirements were completed. The study indicated that locating the facility adjacent to the LPTF would be operationally and economically feasible. (auth)« less
Factors Associated with PMTCT Cascade Completion in Four African Countries.
Dionne-Odom, Jodie; Welty, Thomas K; Westfall, Andrew O; Chi, Benjamin H; Ekouevi, Didier Koumavi; Kasaro, Margaret; Tih, Pius M; Tita, Alan T N
2016-01-01
Background. Many countries are working to reduce or eliminate mother-to-child transmission (MTCT) of HIV. Prevention efforts have been conceptualized as steps in a cascade but cascade completion rates during and after pregnancy are low. Methods. A cross-sectional survey was performed across 26 communities in Cameroon, Cote d'Ivoire, South Africa, and Zambia. Women who reported a pregnancy within two years were enrolled. Participant responses were used to construct the PMTCT cascade with all of the following steps required for completion: at least one antenatal visit, HIV testing performed, HIV testing result received, initiation of maternal prophylaxis, and initiation of infant prophylaxis. Factors associated with cascade completion were identified using multivariable logistic regression modeling. Results. Of 976 HIV-infected women, only 355 (36.4%) completed the PMTCT cascade. Although most women (69.2%) did not know their partner's HIV status; awareness of partner HIV status was associated with cascade completion (aOR 1.4, 95% CI 1.01-2.0). Completion was also associated with receiving an HIV diagnosis prior to pregnancy compared with HIV diagnosis during or after pregnancy (aOR 14.1, 95% CI 5.2-38.6). Conclusions. Pregnant women with HIV infection in Africa who were aware of their partner's HIV status and who were diagnosed with HIV before pregnancy were more likely to complete the PMTCT cascade.
Factors Associated with PMTCT Cascade Completion in Four African Countries
Welty, Thomas K.; Westfall, Andrew O.; Chi, Benjamin H.; Ekouevi, Didier Koumavi; Tih, Pius M.; Tita, Alan T. N.
2016-01-01
Background. Many countries are working to reduce or eliminate mother-to-child transmission (MTCT) of HIV. Prevention efforts have been conceptualized as steps in a cascade but cascade completion rates during and after pregnancy are low. Methods. A cross-sectional survey was performed across 26 communities in Cameroon, Cote d'Ivoire, South Africa, and Zambia. Women who reported a pregnancy within two years were enrolled. Participant responses were used to construct the PMTCT cascade with all of the following steps required for completion: at least one antenatal visit, HIV testing performed, HIV testing result received, initiation of maternal prophylaxis, and initiation of infant prophylaxis. Factors associated with cascade completion were identified using multivariable logistic regression modeling. Results. Of 976 HIV-infected women, only 355 (36.4%) completed the PMTCT cascade. Although most women (69.2%) did not know their partner's HIV status; awareness of partner HIV status was associated with cascade completion (aOR 1.4, 95% CI 1.01–2.0). Completion was also associated with receiving an HIV diagnosis prior to pregnancy compared with HIV diagnosis during or after pregnancy (aOR 14.1, 95% CI 5.2–38.6). Conclusions. Pregnant women with HIV infection in Africa who were aware of their partner's HIV status and who were diagnosed with HIV before pregnancy were more likely to complete the PMTCT cascade. PMID:27872760
Energy cost of the Trondheim firefighter test for experienced firefighters.
von Heimburg, Erna; Medbø, Jon Ingulf
2013-01-01
The aim of this study was to measure aerobic demands of fire fighting activities including exercise in the heat. Twenty-two experienced firefighters performed the Trondheim test simulating fire fighting tasks including work in the heat. Maximal oxygen uptake (VO2 max), heart rate (HR) and ventilation were recorded continuously. Data were compared with results obtained during a treadmill test during which the participants were dressed as smoke divers. The participants completed physical parts of the Trondheim test in ˜12 min (range: 7.5-17.4). Time to complete the test was closely related to the participant's VO2 max. HR of ˜170 beats/min and pulmonary ventilation of ˜100 L/min were higher than at lactate threshold (LT) during laboratory tests. VO2 averaged over the test's physical part was 35 ± 7 ml/min/kg, which was at the same or below the level corresponding to the participants' LT. Physically fit participants completed the test faster than less fit participants. Slower and physically less fit participants consumed more air and used more oxygen than faster and physically more fit participants. The Trondheim test is physically demanding; it distinguishes physically fit and less fit participants.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brown, Geoffrey Wayne; Leonard, Philip; Hartline, Ernest Leon
High Explosives and Technology (M-7) completed the second round of formulation and testing of Remediated Nitrate Salt (RNS) surrogates on March 17, 2016. This report summarizes the results of the work and also includes additional documentation required under test plan PLAN-TA9-2443 Rev B, "Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure", released February 16, 2016. All formulation and testing was carried out according to PLAN-TA9-2443 Rev B. Results from the first round of formulation and testing were documented in memorandum M7-16-6042, "Results from First Round of Remediated Nitrate Salt Surrogate Formulation and Testing."
Tests of 38 Ball-Bearing Greases
NASA Technical Reports Server (NTRS)
Mcmurtrey, E. L.
1982-01-01
Report presents interim results in program of long-term tests of ball-bearing greases in vacuum, oxidizing, and otherwise hostile environment. Program is motivated by need for mechanisms that will operate for long periods in spacecraft or space stations. Class of lubricants based on perfluoroalkylpolyether (PFPE) with fluorotelomer thickeners has given best results in vacuum tests completed thus far. Test methods and performances of various lubricants could be of interest in automotive and industrial communities.
The impact of multiplex genetic testing on disease risk perceptions.
Shiloh, S; deHeer, H D; Peleg, S; Hensley Alford, S; Skapinsky, K; Roberts, J S; Hadley, D W
2015-02-01
This study assessed the effects of multiplex genetic testing on disease risk perceptions among 216 healthy adults. Participants, aged 25-40, were recruited through the Multiplex Initiative, which offered a genetic susceptibility test for eight common diseases. Participants completed baseline telephone and web-based surveys prior to making the testing decision. Three months after the receipt of mailed test results, participants completed a follow-up telephone survey. Risk perceptions for the eight diseases were measured at baseline and follow-up, along with beliefs about genetic causation of those diseases. The main results were: (i) mean risk perceptions were considerably stable from baseline to follow-up; (ii) the best predictors of follow-up risk perceptions were the corresponding baseline perceptions and family history; and (iii) within-individuals, most participants increased or decreased their risk perceptions for specific diseases in concordance with the number of risk markers they carry, their family history and their beliefs about genetic causality of diseases. In conclusion, participants presented a vigilant approach to the interpretation of genetic test results, which provides reassurance with regard to a potential inflation of risk perceptions in the population because of multiplex genetic testing. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Beltrami, John; Wang, Guoshen; Usman, Hussain R; Lin, Lillian S
In 2010, the Centers for Disease Control and Prevention (CDC) implemented a national data quality assessment and feedback system for CDC-funded HIV testing program data. Our objective was to analyze data quality before and after feedback. Coinciding with required quarterly data submissions to CDC, each health department received data quality feedback reports and a call with CDC to discuss the reports. Data from 2008 to 2011 were analyzed. Fifty-nine state and local health departments that were funded for comprehensive HIV prevention services. Data collected by a service provider in conjunction with a client receiving HIV testing. National data quality assessment and feedback system. Before and after intervention implementation, quality was assessed through the number of new test records reported and the percentage of data values that were neither missing nor invalid. Generalized estimating equations were used to assess the effect of feedback in improving the completeness of variables. Data were included from 44 health departments. The average number of new records per submission period increased from 197 907 before feedback implementation to 497 753 afterward. Completeness was high before and after feedback for race/ethnicity (99.3% vs 99.3%), current test results (99.1% vs 99.7%), prior testing and results (97.4% vs 97.7%), and receipt of results (91.4% vs 91.2%). Completeness improved for HIV risk (83.6% vs 89.5%), linkage to HIV care (56.0% vs 64.0%), referral to HIV partner services (58.9% vs 62.8%), and referral to HIV prevention services (55.3% vs 63.9%). Calls as part of feedback were associated with improved completeness for HIV risk (adjusted odds ratio [AOR] = 2.28; 95% confidence interval [CI], 1.75-2.96), linkage to HIV care (AOR = 1.60; 95% CI, 1.31-1.96), referral to HIV partner services (AOR = 1.73; 95% CI, 1.43-2.09), and referral to HIV prevention services (AOR = 1.74; 95% CI, 1.43-2.10). Feedback contributed to increased data quality. CDC and health departments should continue monitoring the data and implement measures to improve variables of low completeness.
Green, Beverly B.; Anderson, Melissa L.; Chubak, Jessica; Fuller, Sharon; Meenan, Richard T.; Vernon, Sally W.
2016-01-01
BACKGROUND The current study was conducted to determine the effect of continuing a centralized fecal occult blood test (FOBT) mailed program on screening adherence. METHODS A patient-level randomized controlled trial was conducted in 21 patient-centered medical home primary care clinics between January 2010 and November 2012. A total of 2208 patients ranging in age from 52 to 75 years in a substudy of the Systems of Support to Increase Colon Cancer Screening and Follow-Up (SOS) trial were randomized at year 3 to continued automated interventions (Continued group), which included mailed information regarding colorectal cancer (CRC) screening choices, and were mailed stool kit tests or to a group in which interventions were stopped (Stopped group). The main outcomes and measures were the completion of CRC screening in year 3 and by subgroup characteristics, respectively. RESULTS Adherence to CRC screening in year 3 was found to be significantly higher in patients in the Continued group compared with those in the Stopped group (53.3% vs 37.3%; adjusted net difference, 15.6% [P<.001]). This difference was entirely due to greater completion of FOBT (adjusted net difference, 18.0% [P<.001]). Year 3 CRC screening rates were highest in patients in the Continued group completing FOBT in both years 1 and 2 (77.2%), followed by patients completing only 1 FOBT in 1 of the 2 years (44.6%), with low rates of CRC testing reported among patients not completing any FOBT within the first 2 years (18.1%). CONCLUSIONS A centralized mailed FOBT CRC screening program continued to be more effective than patient-centered medical home usual-care interventions, but only for those patients who had previously completed FOBT testing. Research is needed regarding how to engage patients not completing CRC testing after being mailed at least 2 rounds of FOBT tests. PMID:26488332
Do Age-Group Differences on Mental Tests Imitate Racial Differences?
ERIC Educational Resources Information Center
Jensen, Arthur R.
2003-01-01
Results from a battery of 17 diverse tests completed by 877 white and 855 black students in grades 3 through 8 support Spearman's hypothesis that the white-black difference in test performance is predominantly a general intelligence ("g") difference rather than a unitary developmental difference affecting all factors in test performance.…
46 CFR 160.062-4 - Inspections and tests.
Code of Federal Regulations, 2013 CFR
2013-10-01
... required under § 160.062-3(b) while the device is submerged in water or in a water-filled pressure testing... manual control as a result of the low temperature exposure. (iii) Corrosion resisting test. After the completion of its temperature test, a hydraulic release sample shall be exposed to a 20 percent salt spray...
46 CFR 160.062-4 - Inspections and tests.
Code of Federal Regulations, 2014 CFR
2014-10-01
... required under § 160.062-3(b) while the device is submerged in water or in a water-filled pressure testing... manual control as a result of the low temperature exposure. (iii) Corrosion resisting test. After the completion of its temperature test, a hydraulic release sample shall be exposed to a 20 percent salt spray...
46 CFR 160.062-4 - Inspections and tests.
Code of Federal Regulations, 2012 CFR
2012-10-01
... required under § 160.062-3(b) while the device is submerged in water or in a water-filled pressure testing... manual control as a result of the low temperature exposure. (iii) Corrosion resisting test. After the completion of its temperature test, a hydraulic release sample shall be exposed to a 20 percent salt spray...
46 CFR 160.062-4 - Inspections and tests.
Code of Federal Regulations, 2011 CFR
2011-10-01
... required under § 160.062-3(b) while the device is submerged in water or in a water-filled pressure testing... manual control as a result of the low temperature exposure. (iii) Corrosion resisting test. After the completion of its temperature test, a hydraulic release sample shall be exposed to a 20 percent salt spray...
ERIC Educational Resources Information Center
Erin, Jane N.; Hong, Sunggye; Schoch, Christina; Kuo, YaJu
2006-01-01
This study compared the test scores and time required by high school students who are blind, sighted, or have low vision to complete tests administered in written and oral formats. The quantitative results showed that the blind students performed better on multiple-choice tests in braille and needed more time while taking tests in braille. The…
Fallaha, Michel; Belzile, Sylvain; Martel-Pelletier, Johanne; Pelletier, Jean-Pierre; Feldman, Debbie; Sylvestre, Marie-Pierre; Vendittoli, Pascal-André; Desmeules, François
2018-01-01
Objective To assess the diagnostic validity of clusters combining history elements and physical examination tests to diagnose partial or complete anterior cruciate ligament (ACL) tears. Design Prospective diagnostic study. Settings Orthopaedic clinics (n = 2), family medicine clinics (n = 2) and community-dwelling. Participants Consecutive patients with a knee complaint (n = 279) and consulting one of the participating orthopaedic surgeons (n = 3) or sport medicine physicians (n = 2). Interventions Not applicable. Main outcome measures History elements and physical examination tests performed independently were compared to the reference standard: an expert physicians’ composite diagnosis including history elements, physical tests and confirmatory magnetic resonance imaging. Penalized logistic regression (LASSO) was used to identify history elements and physical examination tests associated with the diagnosis of ACL tear and recursive partitioning was used to develop diagnostic clusters. Diagnostic accuracy measures including sensitivity (Se), specificity (Sp), predictive values and positive and negative likelihood ratios (LR+/-) with associated 95% confidence intervals (CI) were calculated. Results Forty-three individuals received a diagnosis of partial or complete ACL tear (15.4% of total cohort). The Lachman test alone was able to diagnose partial or complete ACL tears (LR+: 38.4; 95%CI: 16.0–92.5). Combining a history of trauma during a pivot with a “popping” sensation also reached a high diagnostic validity for partial or complete tears (LR+: 9.8; 95%CI: 5.6–17.3). Combining a history of trauma during a pivot, immediate effusion after trauma and a positive Lachman test was able to identify individuals with a complete ACL tear (LR+: 17.5; 95%CI: 9.8–31.5). Finally, combining a negative history of pivot or a negative popping sensation during trauma with a negative Lachman or pivot shift test was able to exclude both partial or complete ACL tears (LR-: 0.08; 95%CI: 0.03–0.24). Conclusion Diagnostic clusters combining history elements and physical examination tests can support the differential diagnosis of ACL tears compared to various knee disorders. PMID:29894492
Results and Analysis from Space Suit Joint Torque Testing
NASA Technical Reports Server (NTRS)
Matty, Jennifer
2010-01-01
This joint mobility KC lecture included information from two papers, "A Method for and Issues Associated with the Determination of Space Suit Joint Requirements" and "Results and Analysis from Space Suit Joint Torque Testing," as presented for the International Conference on Environmental Systems in 2009 and 2010, respectively. The first paper discusses historical joint torque testing methodologies and approaches that were tested in 2008 and 2009. The second paper discusses the testing that was completed in 2009 and 2010.
NASA Technical Reports Server (NTRS)
Reed, W. H.
1978-01-01
Silicon tetrachloride and a reductant (sodium) will be injected into an arc heated mixture of hydrogen and argon, yielding silicon and gaseous sodium chloride. Detailed characterization of the Sonicore sodium injection nozzle, using water as the test fluid was completed. Results indicated that flow rates of 45 gph sodium and 50 scfm argon should produce sufficiently small droplet sizes. The design effort was also completed for the test system preparation which was divided into two categories: (1) system components and (2) test system-laboratory integration.
A test technique for measuring lightning-induced voltages on aircraft electrical circuits
NASA Technical Reports Server (NTRS)
Walko, L. C.
1974-01-01
The development of a test technique used for the measurement of lightning-induced voltages in the electrical circuits of a complete aircraft is described. The resultant technique utilizes a portable device known as a transient analyzer capable of generating unidirectional current impulses similar to lightning current surges, but at a lower current level. A linear relationship between the magnitude of lightning current and the magnitude of induced voltage permitted the scaling up of measured induced values to full threat levels. The test technique was found to be practical when used on a complete aircraft.
Mezzalira, Raquel; Bittar, Roseli Saraiva Moreira; do Carmo Bilécki-Stipsky, Marcia Maria; Brugnera, Cibele; Grasel, Signe Schuster
2017-08-01
This study compared the results of the caloric test with those of the video head impulse test obtained during the same session and evaluated whether the former can be used to screen for non-acute vestibular dysfunction. A total of 157 participants complaining of dizziness with vestibular characteristics of varying durations and clinical courses completed the caloric test and video head impulse test. Significantly more caloric test results than video head impulse test results were abnormal. The results of the caloric test and video head impulse test are distinct but complement each other. Within our sample, the caloric test was more sensitive for vestibular dysfunction. Therefore, the video head impulse test is not a suitable screening tool of the vestibular system in patients with chronic complaints.
Roos, Margaret A; Reisman, Darcy S; Hicks, Gregory; Rose, William; Rudolph, Katherine S
2016-01-01
Adults with stroke have difficulty avoiding obstacles when walking, especially when a time constraint is imposed. The Four Square Step Test (FSST) evaluates dynamic balance by requiring individuals to step over canes in multiple directions while being timed, but many people with stroke are unable to complete it. The purposes of this study were to (1) modify the FSST by replacing the canes with tape so that more persons with stroke could successfully complete the test and (2) examine the reliability and validity of the modified version. Fifty-five subjects completed the Modified FSST (mFSST) by stepping over tape in all four directions while being timed. The mFSST resulted in significantly greater numbers of subjects completing the test than the FSST (39/55 [71%] and 33/55 [60%], respectively) (p < 0.04). The test-retest, intrarater, and interrater reliability of the mFSST were excellent (intraclass correlation coefficient ranges: 0.81-0.99). Construct and concurrent validity of the mFSST were also established. The minimal detectable change was 6.73 s. The mFSST, an ideal measure of dynamic balance, can identify progress in people with stroke in varied settings and can be completed by a wide range of people with stroke in approximately 5 min with the use of minimal equipment (tape, stop watch).
Loss to Follow-Up from HIV Screening to ART Initiation in Rural China
Gu, Diane; Mao, Yurong; Tang, Zhenzhu; Montaner, Julio; Shen, Zhiyong; Zhu, Qiuying; Detels, Roger; Jin, Xia; Xiong, Ran; Xu, Juan; Ling, Walter; Erinoff, Lynda; Lindblad, Robert; Liu, David; Van Veldhuisen, Paul; Hasson, Albert; Wu, Zunyou
2016-01-01
Background Patients who are newly screened HIV positive by EIA are lost to follow-up due to complicated HIV testing procedures. Because this is the first step in care, it affects the entire continuum of care. This is a particular concern in rural China. Objective(s) To assess the routine HIV testing completeness and treatment initiation rates at 18 county-level general hospitals in rural Guangxi. Methods We reviewed original hospital HIV screening records. Investigators also engaged with hospital leaders and key personnel involved in HIV prevention activities to characterize in detail the routine care practices in place at each county. Results 699 newly screened HIV-positive patients between January 1 and June 30, 2013 across the 18 hospitals were included in the study. The proportion of confirmatory testing across the 18 hospitals ranged from 14% to 87% (mean of 43%), and the proportion of newly diagnosed individuals successfully initiated antiretroviral treatment across the hospitals ranged from 3% to 67% (mean of 23%). The average interval within hospitals for individuals to receive the Western Blot (WB) and CD4 test results from HIV positive screening (i.e. achieving testing completion) ranged from 14–116 days (mean of 41.7 days) across the hospitals. The shortest interval from receiving a positive EIA screening test result to receiving WB and CD4 testing and counseling was 0 day and the longest was 260 days. Conclusion The proportion of patients newly screened HIV positive that completed the necessary testing procedures for HIV confirmation and received ART was very low. Interventions are urgently needed to remove barriers so that HIV patients can have timely access to HIV/AIDS treatment and care in rural China. PMID:27768710
RTG performance on Galileo and Ulysses and Cassini test results
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kelly, C. Edward; Klee, Paul M.
Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Similar comparisons are made for the RTG on the Ulysses spacecraft which completed its planned mission in 1995. Also presented are test results from small scale thermoelectric modules and full scale converters performed for the Cassini program. The Cassini mission to Saturn is scheduled for an October 1997 launch. Small scale module test results on thermoelectric couples from the qualification and flight production runs are shown. These tests have exceeded 19,000more » hours are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. Test results are presented for full scale units both ETGs (E-6, E-7) and RTGs (F-2, F-5) along with mission power predictions. F-5, fueled in 1985, served as a spare for the Galileo and Ulysses missions and plays the same role in the Cassini program. It has successfully completed all acceptance testing. The ten years storage between thermal vacuum tests is the longest ever experienced by an RTG. The data from this test are unique in providing the effects of long term low temperature storage on power output. All ETG and RTG test results to date indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of at least five percent are predicted.« less
Benchmark Calibration Tests Completed for Stirling Convertor Heater Head Life Assessment
NASA Technical Reports Server (NTRS)
Krause, David L.; Halford, Gary R.; Bowman, Randy R.
2005-01-01
A major phase of benchmark testing has been completed at the NASA Glenn Research Center (http://www.nasa.gov/glenn/), where a critical component of the Stirling Radioisotope Generator (SRG) is undergoing extensive experimentation to aid the development of an analytical life-prediction methodology. Two special-purpose test rigs subjected SRG heater-head pressure-vessel test articles to accelerated creep conditions, using the standard design temperatures to stay within the wall material s operating creep-response regime, but increasing wall stresses up to 7 times over the design point. This resulted in well-controlled "ballooning" of the heater-head hot end. The test plan was developed to provide critical input to analytical parameters in a reasonable period of time.
Autonomous Precision Landing and Hazard Avoidance Technology (ALHAT) Project Status as of May 2010
NASA Technical Reports Server (NTRS)
Striepe, Scott A.; Epp, Chirold D.; Robertson, Edward A.
2010-01-01
This paper includes the current status of NASA s Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) Project. The ALHAT team has completed several flight tests and two major design analysis cycles. These tests and analyses examine terrain relative navigation sensors, hazard detection and avoidance sensors and algorithms, and hazard relative navigation algorithms, and the guidance and navigation system using these ALHAT functions. The next flight test is scheduled for July 2010. The paper contains results from completed flight tests and analysis cycles. ALHAT system status, upcoming tests and analyses is also addressed. The current ALHAT plans as of May 2010 are discussed. Application of the ALHAT system to landing on bodies other than the Moon is included
Tobler, Kyle J; Shoham, Gon; Christianson, Mindy S; Zhao, Yulian; Leong, Milton; Shoham, Zeev
2015-10-01
The aim of this study is to assess how anti-mullerian hormone (AMH) is used worldwide to test ovarian reserve and guide in vitro fertilization (IVF) cycle management. An internet-based survey was sent electronically to registered IVF providers within the IVF-Worldwide.com network. This survey consisted of nine questions which assessed the clinics' use of AMH. The questionnaire was completed online through the IVF-Worldwide.com website, and quality assurance tools were used to verify that only one survey was completed per clinical IVF center. Results are reported as the proportion of IVF cycles represented by a particular answer choice. Survey responses were completed from 796 globally distributed IVF clinics, representing 593,200 IVF cycles worldwide. Sixty percent of the respondent-IVF cycles reported to use AMH as a first line test, and 54 % reported it as the best test for evaluating ovarian reserve. Eighty-nine percent reported that AMH results were extremely relevant or relevant to clinical practice. However in contrast, for predicting live birth rate, 81 % reported age as the best predictor. AMH is currently considered a first line test for evaluating ovarian reserve and is considered relevant to clinical practice by the majority of IVF providers.
McLachlan, E; Anderson, S; Hawkes, D; Saville, M; Arabena, K
2018-02-01
To examine factors that enhance under-screened and never-screened women's completion of the self-collection alternative pathway of the Renewed National Cervical Screening Program (ncsp) in Victoria, Australia. With the Australian ncsp changing, starting on 1 December 2017, the Medical Services Advisory Committee (msac) recommended implementing human papillomavirus (hpv) testing using a self-collected sample for under-screened and never-screened populations. In response, a multi-agency group implemented an hpv self-collection pilot project to trial self-collection screening pathways for eligible women. Quantitative data were collected on participation rates and compliance rates with follow-up procedures across three primary health care settings. Forty women who self-collected were interviewed in a semi-structured format, and seven agency staff completed in-depth interviews. Qualitative data were used to identify and understand clinical and personal enablers that assisted women to complete self-collection cervical screening pathways successfully. Eighty-five per cent (10 women) of participants who tested positive for hpv successfully received their results and completed follow-up procedures as required. Two remaining participants also received hpv-positive results. However, agencies were unable to engage them in follow-up services and procedures. The overall participation rate in screening (self-collection or Pap test) was 85.7% (84 women), with 79 women self-collecting. Qualitative data indicated that clear explanations on self-collection, development of trusting, empathetic relationships with health professionals, and recognition of participants' past experiences were critical to the successful completion of the self-collection pathway. When asked about possible inhibitors to screening and to following up on results and appointments, women cited poor physical and mental health, as well as financial and other structural barriers. A well-implemented process, led by trusted, knowledgeable, and engaged health care professionals who can provide appropriate support and information, can assist under-screened and never-screened women to complete the hpv self-collection pathway successfully.
The Influence of Restraint Systems on Panel Behavior
NASA Technical Reports Server (NTRS)
Jegley, Dawn C.
2011-01-01
When a panel is tested in uniaxial compression in a test machine, the boundary conditions are not quite the same as they would be if it were part of a complete structure. A restraint system may be used to simulate conditions found in a complete vehicle. Quantifying the quality of the restraint with only point-measurement devices can leave an inadequate characterization of the out-of-plane behavior. However, today s full-field displacement monitoring techniques allow for much more accurate views of the global panel deformation and strain, and therefore allow for a better understanding of panel behavior. In the current study, the behavior of a hat-stiffened and two rod-stiffened carbon-epoxy panels is considered. Panels were approximately 2 meters tall and 0.76 to 1.06 m wide. Unloaded edges were supported by knife edges and stiffeners were attached to a support structure at selected locations to restrain out-of-plane motion. A comparison is made between test results based on full-field measurements and analyses based on assumptions of boundary conditions of a completely rigid edge restraint and the absence of any edge restraint. Results indicate that motion at the restrained edges must be considered to obtain accurate test-analysis correlation.
Barnhardt, Terrence M
2005-10-01
Three experiments explored the distinction between identification and production processes (e.g., Gabrieli et al., 1999). A stem decision test was introduced, in which participants were asked to state whether there were any English words that began with the presented three-letter stems. In Experiment 1, stem decision priming was robust for single-solution stems, but much reduced for many-solution stems. In Experiment 2, the solutions effect in stem decision was replicated in a within-subjects design, as was the contrast between the presence of priming in a many-solution stem completion test and the absence of priming in a many-solution stem decision test. In Experiment 3, for each critical many-solution stem in the stem decision test, participants studied three words that began with those three letters. Again, priming was not observed. These results were consistent with the notions that (a) many-solution stem completion relies on production processes, (b) the stem decision test eliminates production processes, and (c) single-solution priming relies on identification processes, regardless of whether the test is stem completion or stem decision.
... microscope Blood tests that may be done include: Liver function tests (especially alkaline phosphatase or bilirubin levels) Complete blood count (CBC) Treatment ... and may result in a cure. If the tumor is large, the entire liver may need to be removed and a liver ...
Comparison of Development Test and Evaluation and Overall Program Estimate at Completion
2011-03-01
of the overall model and parameter. In addition to 36 the Shapiro-Wilkes test , and Cook’s Distance overlay plot we used the Breusch - Pagan test to...Transformed Model Finally, we evaluated our log transformed model using the Breusch - Pagan test . The results return a value of .51, thus confirming our...COMPARISON OF DEVELOPMENT TEST AND EVALUATION AND OVERALL
Erosive burning research. [for solid-propellant rocket engines
NASA Technical Reports Server (NTRS)
Strand, L.; Yang, L. C.; Nguyen, M. H.; Cohen, N. S.
1986-01-01
A status report is given on the results for the completed tests in a series of motor firings being carried out to measure the effects of the parameters that are considered to most strongly influence the scaling to larger rocket motor sizes of the transition to/or threshold conditions for erosive burning rate augmentation. Propellant burning rates at locations along the axis of the test motors are measured with a newly developed plasma capacitance gauge technique. The measured results are compared with erosive-burning predictions from a supporting ballistics analysis. The completed motor firings have successfully demonstrated response to the designed test variables. The trends with varying propellant burning rate, chamber pressure, and mass flow rate are consistent with existing results, but no pronounced effect of surface roughness has been observed. Rather, the influence of propellant oxidizer particle size on erosive burning is through its effect on the base, no-corssflow burning rate.
1981-02-11
1. Have test data been collected, recorded, and presented in accordance with this TOP? Yes No Comment : 2. Were the facilities, test equipment...instrumentation, and support accommodations adequate to accomplish the test objectives? Yes No Comment : 3. Have all data collected been reviewed for...correctness and completeness? Yes No Comment : 4. Were the test results compromised in any way due to insufficient test planning? Yes No Comment : 5. Were the
Could Acoustic Emission Testing Show a Pipe Failure in Advance?
NASA Astrophysics Data System (ADS)
Soares, S. D.; Teixeira, J. C. G.
2004-02-01
During the last 20 years PETROBRAS has been attempting to use Acoustic Emission (AE) as an inspection tool. In this period the AE concept has changed from a revolutionary method to a way of finding areas to make a complete inspection. PETROBRAS has a lot of pressure vessels inspected by AE and with other NDTs techniques to establish their relationship. In other hand, PETROBRAS R&D Center has conducted destructive hydrostatic tests in pipelines samples with artificial defects made by milling. Those tests were monitored by acoustic emission and manual ultrasonic until the complete failure of pipe sample. This article shows the results obtained and a brief proposal of analysis criteria for this environment of test.
Giri, Veda N; Obeid, Elias; Hegarty, Sarah E; Gross, Laura; Bealin, Lisa; Hyatt, Colette; Fang, Carolyn Y; Leader, Amy
2018-04-14
Genetic testing (GT) for prostate cancer (PCA) is rising, with limited insights regarding genetic counseling (GC) needs of males. Genetic Evaluation of Men (GEM) is a prospective multigene testing study for inherited PCA. Men undergoing GC were surveyed on knowledge of cancer risk and genetics (CRG) and understanding of personal GT results to identify GC needs. GEM participants with or high-risk for PCA were recruited. Pre-test GC was in-person, with video and handout, or via telehealth. Post-test disclosure was in-person, by phone, or via telehealth. Clinical and family history data were obtained from participant surveys and medical records. Participants completed measures of knowledge of CRG, literacy, and numeracy pre-test and post-test. Understanding of personal genetic results was assessed post-test. Factors associated with knowledge of CRG and understanding of personal genetic results were examined using multivariable linear regression or McNemar's test. Among 109 men who completed pre- and post-GT surveys, multivariable analysis revealed family history meeting hereditary cancer syndrome (HCS) criteria was significantly predictive of higher baseline knowledge (P = 0.040). Of 101 men who responded definitively regarding understanding of results, 13 incorrectly reported their result (McNemar's P < 0.001). Factors significantly associated with discordance between reported and actual results included having a variant of uncertain significance (VUS) (P < 0.001) and undergoing GC via pre-test video and post-test phone disclosure (P = 0.015). While meeting criteria for HCS was associated with higher knowledge of CRG, understanding of personal GT results was lacking among a subset of males with VUS. A more exploratory finding was lack of understanding of results among men who underwent GC utilizing video and phone. Studies optimizing GC strategies for males undergoing multigene testing for inherited PCA are warranted. © 2018 Wiley Periodicals, Inc.
Geber, S; Lemgruber, M; Taitson, P F; Valle, M; Sampaio, M
2012-05-01
This case report demonstrates a successful pregnancy after ICSI combined with hypo-osmotic swelling test in a couple with Kartagener's syndrome with complete immotile ejaculated spermatozoa. Our result suggests that even for complete immotile spermatozoa, the use of hypo-osmotic swelling test is a good alternative to identify viable spermatozoa. When associated with ICSI, it can be a valuable tool to get fertilisation and pregnancy. © 2011 Blackwell Verlag GmbH.
Cell module and fuel conditioner
NASA Technical Reports Server (NTRS)
Hoover, D. Q., Jr.
1981-01-01
The results of the completed tests on Stack 561 and the on-going tests of 562 (23 cell stacks of the MK-1 and M-2 designs respectively) are reported and their performance is compared. Results of the on-going endurance test of Stack 560 (5 cell, MK-2) are reported. Plans for fabrication of Stacks 563 and 564 (23 cell stacks of the MK-1 and MK-2 design) are summarized. Results of the burner tests are given. Excellent performance was achieved on simulated anode exhaust gas over very wide load and air/fuel ranges.
The CF6 jet engine performance improvement: New front mount
NASA Technical Reports Server (NTRS)
Fasching, W. A.
1979-01-01
The New Front Mount was evaluated in component tests including stress, deflection/distortion and fatigue tests. The test results demonstrated a performance improvement of 0.1% in cruise sfc, 16% in compressor stall margin and 10% in compressor stator angle margin. The New Front Mount hardware successfully completed 35,000 simulated flight cycles endurance testing.
An antenna pointing mechanism for large reflector antennas
NASA Technical Reports Server (NTRS)
Heimerdinger, H.
1981-01-01
An antenna pointing mechanism for large reflector antennas on direct broadcasting communication satellites was built and tested. After listing the requirements and constraints for this equipment the model is described, and performance figures are given. Futhermore, results of the qualification level tests, including functional, vibrational, thermovacuum, and accelerated life tests are reported. These tests were completed successfully.
The Relationship of Test Anxiety to Serum Beta-endorphin.
ERIC Educational Resources Information Center
Molinaro, Jane Anne
This study attempted to determine if test anxiety is manifested in pre-medical students as a result of the Medical College Admission Test (MCAT) and if Beta-endorphin similarly responds to that type of situational stress. Seventeen participants completed the Test Anxiety Inventory (TAI) by Spielberger et al. (1980) and donated 30 ml of blood for…
40 CFR 63.162 - Standards: General.
Code of Federal Regulations, 2010 CFR
2010-07-01
... the reports required by § 63.182 of this subpart, review of performance test results, and by... that define a period of time for completion of required tasks (e.g., weekly, monthly, quarterly, annual... section. (2) Time periods specified in this subpart for completion of required tasks may be changed by...
ERIC Educational Resources Information Center
Li, Weidong; Lee, Amelia M.; Solmon, Melinda A.
2005-01-01
This study was designed to explore the relationships among individuals' dispositional ability conceptions, intrinsic motivation, experience, perceived competence, persistence, and performance. Participants practiced a novel task, completed surveys before instruction and after practicing the task, and completed a skill test. The results indicated…
An Examination of Master's Student Retention & Completion
ERIC Educational Resources Information Center
Barry, Melissa; Mathies, Charles
2011-01-01
This study was conducted at a research-extensive public university in the southeastern United States. It examined the retention and completion of master's degree students across numerous disciplines. Results were derived from a series of descriptive statistics, T-tests, and a series of binary logistic regression models. The findings from binary…
McLachlan, E.; Anderson, S.; Hawkes, D.; Saville, M.; Arabena, K.
2018-01-01
Objectives To examine factors that enhance under-screened and never-screened women’s completion of the self-collection alternative pathway of the Renewed National Cervical Screening Program (ncsp) in Victoria, Australia. Background With the Australian ncsp changing, starting on 1 December 2017, the Medical Services Advisory Committee (msac) recommended implementing human papillomavirus (hpv) testing using a self-collected sample for under-screened and never-screened populations. In response, a multi-agency group implemented an hpv self-collection pilot project to trial self-collection screening pathways for eligible women. Methods Quantitative data were collected on participation rates and compliance rates with follow-up procedures across three primary health care settings. Forty women who self-collected were interviewed in a semi-structured format, and seven agency staff completed in-depth interviews. Qualitative data were used to identify and understand clinical and personal enablers that assisted women to complete self-collection cervical screening pathways successfully. Results Eighty-five per cent (10 women) of participants who tested positive for hpv successfully received their results and completed follow-up procedures as required. Two remaining participants also received hpv-positive results. However, agencies were unable to engage them in follow-up services and procedures. The overall participation rate in screening (self-collection or Pap test) was 85.7% (84 women), with 79 women self-collecting. Qualitative data indicated that clear explanations on self-collection, development of trusting, empathetic relationships with health professionals, and recognition of participants’ past experiences were critical to the successful completion of the self-collection pathway. When asked about possible inhibitors to screening and to following up on results and appointments, women cited poor physical and mental health, as well as financial and other structural barriers. Conclusion A well-implemented process, led by trusted, knowledgeable, and engaged health care professionals who can provide appropriate support and information, can assist under-screened and never-screened women to complete the hpv self-collection pathway successfully. PMID:29507491
Scale-Up of an Human Papillomavirus Testing Implementation Program in El Salvador
Cremer, Miriam; Maza, Mauricio; Alfaro, Karla; Morales Velado, Mario; Felix, Juan; Castle, Philip E.; Kim, Jane; Gage, Julia C.
2017-01-01
Objective The Cervical Cancer Prevention in El Salvador is a demonstration project to introduce a lower-cost human papillomavirus (HPV)-DNA test into a public sector project. Started in October 2012, The Cervical Cancer Prevention in El Salvador consists of 3 phases and will ultimately screen 30,000 women. Results of phase 2 of the project are presented. The objective of this project was to compare colposcopy and noncolposcopy-based management for HPV-positive women. Material and Methods In phase 2, a total of 8,050 women, aged 30 to 49 years, were screened; 6,761 provided both self- and provider-collected specimens and 1,289 provided only provider-testing specimens. HPV results from self-collected specimens were not used in clinical management decisions. Women with provider-collected HPV-positive results were treated based on the strategy assigned to their community; the strategy was colposcopy management (CM) or screen-and-treat (ST) management if they were cryotherapy eligible or colposcopy if not eligible. Outcomes were assessed 6 months after screening. Results Overall, 489 (12.3%) of 3,963 women receiving CM and 465 (11.4%) of 4,087 women receiving ST tested HPV positive. In the CM cohort, 216 (44.2%) of 489 completed their intervention (203 treated, 11 diagnosed negative, 2 pregnant). In the ST cohort, 411 (88.4%) of 465 completed their intervention (407 treated, 2 diagnosed negative, 1 pregnant). Overall agreement between HPV test results from self-collected and provider-collected specimens was 93.7%, with a κ value of 0.70 (95% CI = 0.68–0.73). Conclusions Human papillomavirus testing with ST management resulted in an approximately twice completion rate compared with CM management. Agreement between self- and provider-based sampling was good and might be used to extend screening to women in areas that are more difficult to reach. PMID:27922905
Drnach, Mark; O'Brien, Patricia A; Kreger, Alison
2010-09-01
The purpose of this study was to determine the outcome of a short-term therapeutic horseback riding intervention on the gross motor function in a child with cerebral palsy. This study employed a repeated-measures design with a pretest, a post-test, and a post post-test conducted 5 weeks apart using the Gross Motor Function Measure (GMFM) as an outcome measure. The three sets of test scores from the GMFM were compared upon completion of the intervention. The subject participated in a 5-week therapeutic horseback riding program consisting of 1 hour of riding per week. Each riding session consisted of stretching, strengthening, and balance activities. The child's level of motor function was tested prior to the intervention, upon completion of the intervention, and 5 weeks postintervention. The GMFM, a criterion-referenced observational measure designed to measure change in the gross motor function in children with cerebral palsy, was chosen as the assessment tool. Upon completion of the 5-week intervention, the child was observed to have improved scores on the GMFM in two of the five dimensions measured and scored for a total of eight items. The post post-test was completed 5 weeks after the final riding session and the results demonstrated successful maintenance of the improved scores in seven of eight items. The result of this case study suggest that 5 weeks of therapeutic riding are sufficient to produce positive changes in the gross motor function of a child with cerebral palsy.
Self testing for diabetes mellitus.
Davies, M; Alban-Davies, H; Cook, C; Day, J
1991-01-01
OBJECTIVE--To develop a simple, economically viable, and effective means of population screening for diabetes mellitus. DESIGN--A postal request system for self testing for glycosuria with foil wrapped dipsticks. Preprandial and postprandial tests were compared with a single postprandial test. The subjects were instructed how to test, and a result card was supplied on which to record and return the result. All those recording a positive test result and 50 people recording a negative result were invited for an oral glucose tolerance test. SETTING--General practice in east Suffolk, list size 11534. PATIENTS--All subjects aged 45-70 years registered with the practice were identified by Suffolk Family Health Services Authority (n = 3057). The 73 subjects known to have diabetes from the practice's register were excluded, leaving 2984 subjects, 2363 (79.2%) of whom responded. 1167 subjects completed the single test and 1196 the two tests. MAIN OUTCOME MEASURES--Response rate and number of patients with glycosuria. Sensitivity, specificity, and positive predictive value of a single postprandial test and preprandial and postprandial tests. Number of new cases of diabetes identified and cost of screening. RESULTS--Of the patients completing the single postprandial test, 29 had a positive result, an oral glucose tolerance test showed that eight (28%) had diabetes, six (21%) impaired glucose tolerance, and 14 (48%) normal glucose tolerance. 44 of the group who tested before and after eating had a positive result; nine (20%) had diabetes, five (11%) impaired tolerance, and 26 (11%) normal tolerance. Screening cost 59p per subject and 81 pounds per case detected. Of the 17 people with previously undiagnosed diabetes, eight were asymptomatic and 11 had not visited their general practitioner in the past three months. CONCLUSIONS--A postal request system for self testing for postprandial glycosuria in people aged 45-70 is a simple and effective method of population screening for diabetes mellitus. PMID:1912918
2017-09-01
post chemotherapy testing , completing all protocol-defined tests and procedures and are now off study. Two patients are currently undergoing treatment...and will complete post treatment testing within the upcoming weeks. The first patient enrolled onto this trial was unable to complete post treatment...completed post chemotherapy testing , completing all protocol-defined tests and procedures and are now off study. Two patients are currently
DOE Office of Scientific and Technical Information (OSTI.GOV)
McConnell, Paul E.; Ross, Steven; Grey, Carissa Ann
This report describes tests conducted using a full-size rail cask, the ENSA ENUN 32P, involving handling of the cask and transport of the cask via truck, ships, and rail. The purpose of the tests was to measure strains and accelerations on surrogate pressurized water reactor fuel rods when the fuel assemblies were subjected to Normal Conditions of Transport within the rail cask. In addition, accelerations were measured on the transport platform, the cask cradle, the cask, and the basket within the cask holding the assemblies. These tests were an international collaboration that included Equipos Nucleares S.A., Sandia National Laboratories, Pacificmore » Northwest National Laboratory, Coordinadora Internacional de Cargas S.A., the Transportation Technology Center, Inc., the Korea Radioactive Waste Agency, and the Korea Atomic Energy Research Institute. All test results in this report are PRELIMINARY – complete analyses of test data will be completed and reported in FY18. However, preliminarily: The strains were exceedingly low on the surrogate fuel rods during the rail-cask tests for all the transport and handling modes. The test results provide a compelling technical basis for the safe transport of spent fuel.« less
The Skillings-Mack test (Friedman test when there are missing data).
Chatfield, Mark; Mander, Adrian
2009-04-01
The Skillings-Mack statistic (Skillings and Mack, 1981, Technometrics 23: 171-177) is a general Friedman-type statistic that can be used in almost any block design with an arbitrary missing-data structure. The missing data can be either missing by design, for example, an incomplete block design, or missing completely at random. The Skillings-Mack test is equivalent to the Friedman test when there are no missing data in a balanced complete block design, and the Skillings-Mack test is equivalent to the test suggested in Durbin (1951, British Journal of Psychology, Statistical Section 4: 85-90) for a balanced incomplete block design. The Friedman test was implemented in Stata by Goldstein (1991, Stata Technical Bulletin 3: 26-27) and further developed in Goldstein (2005, Stata Journal 5: 285). This article introduces the skilmack command, which performs the Skillings-Mack test.The skilmack command is also useful when there are many ties or equal ranks (N.B. the Friedman statistic compared with the chi(2) distribution will give a conservative result), as well as for small samples; appropriate results can be obtained by simulating the distribution of the test statistic under the null hypothesis.
A Completely New Type of Actuator -or- This Ain't Your Grandfather's Internal Combustion Engine
NASA Technical Reports Server (NTRS)
Gore, Brian W.; Hawkins, Gary F.; Hess, Peter A.; Moore, Teresa A.; Fournier, Eric W.
2010-01-01
A completely new type of actuator - one that is proposed for use in a variety of environments from sea to land to air to space - has been designed, patented, built, and tested. The actuator is loosely based on the principle of the internal combustion engine, except that it is a completely closed system, only requiring electrical input, and the working fuel is water. This paper outlines the theory behind the electrolysis- and ignition-based cycle upon which the actuator operates and describes the performance capability test apparatus and results for the actuator. A mechanism application that harnessed the unit s power to twist a scaled rotor blade is also highlighted.
Shock-tunnel combustor testing for hypersonic vehicles
NASA Technical Reports Server (NTRS)
Loomis, Mark P.
1994-01-01
Proposed configurations for the next generation of transatmospheric vehicles will rely on air breathing propulsion systems during all or part of their mission. At flight Mach numbers greater than about 7 these engines will operate in the supersonic combustion ramjet mode (scramjet). Ground testing of these engine concepts above Mach 8 requires high pressure, high enthalpy facilities such as shock tunnels and expansion tubes. These impulse, or short duration facilities have test times on the order of a millisecond, requiring high speed instrumentation and data systems. One such facility ideally suited for scramjet testing is the NASA-Ames 16-Inch shock tunnel, which over the last two years has completed a series of tests for the NASP (National Aero-Space Plane) program at simulated flight Mach numbers ranging from 12-16. The focus of the experimental programs consisted of a series of classified tests involving a near-full scale hydrogen fueled scramjet combustor model in the semi-free jet method of engine testing whereby the compressed forebody flow ahead of the cowl inlet is reproduced (see appendix A). The AIMHYE-1 (Ames Integrated Modular Hypersonic Engine) test entry for the NASP program was completed in April 1993, while AIMHYE-2 was completed in May 1994. The test entries were regarded as successful, resulting in some of the first data of its kind on the performance of a near full scale scramjet engine at Mach 12-16. The data was distributed to NASP team members for use in design system verification and development. Due to the classified nature of the hardware and data, the data reports resulting from this work are classified and have been published as part of the NASP literature. However, an unclassified AIAA paper resulted from the work and has been included as appendix A. It contains an overview of the test program and a description of some of the important issues.
NASA Technical Reports Server (NTRS)
Lee, Stuart M. C.; Feiveson, Alan H.; Stenger, Michael B.; Stein, Sydney P.; Platts, Steven H.
2011-01-01
Our laboratory previously reported that the incidence of orthostatic hypotension (OH) was greater after long- than short-duration spaceflight in astronauts who participated in Mir Space Station and Space Shuttle missions. To confirm and extend these findings, we retrospectively examined tilt test data from International Space Station (ISS) and Shuttle astronauts. We anticipated that the proportion of ISS astronauts experiencing OH would be high on landing day and the number of days to recover greater after long- than short-duration missions. Methods: Twenty ISS and 66 Shuttle astronauts participated in 10-min 80? head-up tilt tests 10 d before launch (L-10), on landing day (R+0) or 1 d after landing (R+1). Data from 5 ISS astronauts tested on R+0 or R+1 who used non-standard countermeasures were excluded. Many astronauts repeated the test 3 d (R+3) after landing. Fisher?s Exact Test was used to compare the ability of ISS and Shuttle astronauts to complete the tilt test on R+0. Cox regression was used to identify cardiovascular parameters that were associated with test completion across all tests, and mixed model analysis was used to compare the change and recovery rates between ISS and Shuttle astronauts. In these analyses, ISS data from R+0 and R+1 were pooled to provide sufficient statistical power. Results: The proportion of astronauts who completed the tilt test on R+0 without OH was less in ISS than in Shuttle astronauts (p=0.03). On R+0, only 2 of 6 ISS astronauts completed the test compared to 53 of 66 (80%) Shuttle astronauts. However, 8 of 9 ISS astronauts completed the test on R+1. On R+3, 13 of 15 (87%) of the ISS and 19 of 19 (100%) of the Shuttle astronauts completed the 10-min test. An index comprised of stroke volume and diastolic blood pressure provided a very good prediction of overall tilt survival. This index was altered by spaceflight similarly for both groups soon after landing (pooled R+0 and R+ 1), but ISS astronauts did not recover at the same rate as Shuttle astronauts (p=0.007). Conclusions: The proportion of ISS astronauts who could not complete the tilt test on R+0 due to OH (4 of 6) is similar to that reported in astronauts who flew on Mir (5 of 6). Further, cardiovascular parameters most closely associated with OH recover more slowly after long- compared to short-duration spaceflight.
A comparison of cognitive skills between completes and dropouts in a college physics course
NASA Astrophysics Data System (ADS)
Hudson, H. T.
Separate tests of mathematics skills, proportions and translations between words, and mathematical expression given the first week of class were correlated with performance for students who completed a college physics course (completes) and students who dropped the course (drops). None of the measures used discriminated between completes and drops as groups. However, the correlations between score on the test of math skills and on both of the measures involving mathematical reasoning (proportions, and translations) were dramatically different for the two groups. For the completes, these correlations were slightly negative, but not significant. For the drops, the correlation was positive and signficant at the p < 0.01 level. This suggests the possibility that the students who complete the course tend to have independent cognitive skills for the mechanical mathematical operations and for questions requiring some degree of reasoning, while, in contrast, the same skills for students at high risk for dropping overlap significantly. The study also found that when students are given the results of mathematics skills tests in a diagnostic mode, with feedback on specific areas of weakness and time to remediate with self study, the correlation between mathematics and physics is lower than previously reported values.Received: 2 April 1985
Structural Test and Analysis of a Hybrid Inflatable Antenna
NASA Technical Reports Server (NTRS)
Gaspar, James L.; Mann, Troy; Sreekantamurthy, Tham; Behun, Vaughn
2007-01-01
NASA is developing ultra-lightweight structures technology for communication antennas for space missions. One of the research goals is to evaluate the structural characteristics of inflatable and rigidizable antennas through test and analysis. Being able to test and analyze the structural characteristics of a full scale antenna is important to enable the simulation of various mission scenarios to determine system performance in space. Recent work completed to evaluate a Hybrid Inflatable Antenna concept will be discussed. Tests were completed on a 2-m prototype to optimize its static shape and identify its modal dynamics that are important for analytical model validation. These test results were used to evaluate a preliminary finite element model of the antenna, and this model development and correlation activity is also described in the paper.
Parent Experience With False-Positive Newborn Screening Results for Cystic Fibrosis.
Hayeems, Robin Z; Miller, Fiona A; Barg, Carolyn J; Bombard, Yvonne; Kerr, Elizabeth; Tam, Karen; Carroll, June C; Potter, Beth K; Chakraborty, Pranesh; Davies, Christine; Milburn, Jennifer; Patton, Sarah; Bytautas, Jessica P; Taylor, Louise; Price, April; Gonska, Tanja; Keenan, Katherine; Ratjen, Felix; Guttmann, Astrid
2016-09-01
The risk of psychosocial harm in families of infants with false-positive (FP) newborn bloodspot screening (NBS) results for cystic fibrosis (CF) is a longstanding concern. Whether well designed retrieval and confirmatory testing systems can mitigate risks remains unknown. Using a mixed-methods cohort design, we obtained prospective self-report data from mothers of infants with FP CF NBS results 2 to 3 months after confirmatory testing at Ontario's largest follow-up center, and from a randomly selected control sample of mothers of screen negative infants from the same region. Mothers completed a questionnaire assessing experience and psychosocial response. A sample of mothers of FP infants completed qualitative interviews. One hundred thirty-four mothers of FP infants (response rate, 55%) and 411 controls (response rate, 47%) completed questionnaires; 54 mothers of FP infants were interviewed. Selected psychosocial response measures did not detect psychosocial distress in newborns or 1 year later (P > .05). Mothers recalled distress during notification of the positive result and in the follow-up testing period related to fear of chronic illness, but valued the screening system of care in mitigating concerns. Although immediate distress was reported among mothers of FP infants, selected psychometric tools did not detect these concerns. The NBS center from which mothers were recruited minimizes delay between notification and confirmatory testing and ensures trained professionals are communicating results and facilitating follow-up. These factors may explain the presence of minimal psychosocial burden. The screening system reflected herein may be a model for NBS programs working to minimize FP-related psychosocial harm. Copyright © 2016 by the American Academy of Pediatrics.
HAL/S-360 compiler test activity report
NASA Technical Reports Server (NTRS)
Helmers, C. T.
1974-01-01
The levels of testing employed in verifying the HAL/S-360 compiler were as follows: (1) typical applications program case testing; (2) functional testing of the compiler system and its generated code; and (3) machine oriented testing of compiler implementation on operational computers. Details of the initial test plan and subsequent adaptation are reported, along with complete test results for each phase which examined the production of object codes for every possible source statement.
Mini-BRU/BIPS foil bearing development
NASA Technical Reports Server (NTRS)
Dobler, F. X.; Miller, L. J.
1978-01-01
The analysis revealed the failure agent to be a combination of poor teflon coating adhesion, a decrease in bearing sway space and, possibly, lack of flushing flow through the bearing. A change in Teflon coating vendors provided substantially improved coating quality and surface finish. The sway space was increased and the cooling bleed flow was adjusted to flush the bearing. These changes were included in a test conducted in the WHL from 6 April to 22 May 1978 which resulted in the completion of 1006.9 hours of operation at temperature and load. Post-test inspection revealed the bearings to be in excellent condition and capable of completing a much longer test.
NASA Astrophysics Data System (ADS)
Goodman, H.
2017-12-01
This investigation seeks to develop sealant technology that can restore containment to completed wells that suffer CO2 gas leakages currently untreatable using conventional technologies. Experimentation is performed at the Mont Terri Underground Research Laboratory (MT-URL) located in NW Switzerland. The laboratory affords investigators an intermediate-scale test site that bridges the gap between the laboratory bench and full field-scale conditions. Project focus is the development of CO2 leakage remediation capability using sealant technology. The experimental concept includes design and installation of a field scale completion package designed to mimic well systems heating-cooling conditions that may result in the development of micro-annuli detachments between the casing-cement-formation boundaries (Figure 1). Of particular interest is to test novel sealants that can be injected in to relatively narrow micro-annuli flow-paths of less than 120 microns aperture. Per a special report on CO2 storage submitted to the IPCC[1], active injection wells, along with inactive wells that have been abandoned, are identified as one of the most probable sources of leakage pathways for CO2 escape to the surface. Origins of pressure leakage common to injection well and completions architecture often occur due to tensile cracking from temperature cycles, micro-annulus by casing contraction (differential casing to cement sheath movement) and cement sheath channel development. This discussion summarizes the experiment capability and sealant testing results. The experiment concludes with overcoring of the entire mock-completion test site to assess sealant performance in 2018. [1] IPCC Special Report on Carbon Dioxide Capture and Storage (September 2005), section 5.7.2 Processes and pathways for release of CO2 from geological storage sites, page 244
CONCEPTUAL DESIGN ASSESSMENT FOR THE CO-FIRING OF BIO-REFINERY SUPPLIED LIGNIN PROJECT
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ted Berglund; Jeffrey T. Ranney; Carol L. Babb
2002-04-01
The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed and issued. Processing of bio-solids was completed, providing material for the pilot operations. Pilot facility hydrolysis production has been completed to produce lignin for co-fire testing and the lignin fuel was washed and dewatered. Both the lignin and bio-solids fuel materials for co-fire testing were sent to the co-fire facility (EERC) for evaluation and co-firing. EERC has received coal typical of the fuel to the TVA-Colbert boilers. This material was used atmore » EERC as baseline material and for mixing with the bio-fuel for combustion testing. All the combustion and fuel handling tests at EERC have been completed. During fuel preparation EERC reported no difficulties in fuel blending and handling. Preliminary co-fire test results indicate that the blending of lignin and bio-solids with the Colbert coal blend generally reduces NO{sub x} emissions, increases the reactivity of the coal, and increases the ash deposition rate on superheater surfaces. Deposits produced from the fuel blends, however, are more friable and hence easier to remove from tube surfaces relative to those produced from the baseline Colbert coal blend. The final co-fire testing report is being prepared at EERC and will be completed by the end of the second quarter of 2002. The TVA-Colbert facility has neared completion of the task to evaluate co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The preferred steam supply connection points and steam pipeline routing have been identified. The environmental review of the pipeline routing has been completed and no major impacts have been identified. Detailed assessment of steam export impacts on the Colbert boiler system have been completed and a cost estimate for the steam supply system was completed. The cost estimate and output and heat rate impacts have been used to determine a preliminary price for the exported steam. TVA is further evaluating the impacts of adding lignin to the coal fuel blend and how the steam cost is impacted by proximity of the Masada biomass facility.« less
Shao, Winnie; Guan, Wentao; Clark, Melissa A.; Liu, Tao; Santelices, Claudia; Cortés, Dharma E.; Merchant, Roland C.
2016-01-01
For a world-wide, Internet-based study on HIV/AIDS and HIV testing knowledge, we compared the yields, speed and costs of recruitment and participant diversity across free postings on 13 Internet or social media platforms, paid advertising or postings on 3 platforms, and separate free postings and paid advertisements on Facebook. Platforms were compared by study completions (yield), time to completion, completion to enrollment ratios (CERs), and costs/ completion; and by participants’ demographic characteristics, HIV testing history, and health literacy levels. Of the 482 English-speaking participants, Amazon Mechanical Turk yielded the most participants, recruited participants at the fastest rate and had the highest CER (0.78) and lowest costs / completion. Of the 335 Spanish-speaking participants, Facebook yielded the most participants and recruited participants at the fastest rate, although Amazon Mechanical Turk had the highest CER (0.72) and lowest costs/completion. Across platforms participants differed substantially according to their demographic characteristics, HIV testing history and health literay skills. The study results highlight the need for researchers to strongly consider choice of Internet or social media plaforms when conducting Internet-based research. Because of the sample specifications and cost restraints of studies, specific Internet/ social media or participant selection plaforms will be much more effective or appropriate than others. PMID:27330570
Shao, Winnie; Guan, Wentao; Clark, Melissa A; Liu, Tao; Santelices, Claudia; Cortés, Dharma E; Merchant, Roland C
For a world-wide, Internet-based study on HIV/AIDS and HIV testing knowledge, we compared the yields, speed and costs of recruitment and participant diversity across free postings on 13 Internet or social media platforms, paid advertising or postings on 3 platforms, and separate free postings and paid advertisements on Facebook. Platforms were compared by study completions (yield), time to completion, completion to enrollment ratios (CERs), and costs/ completion; and by participants' demographic characteristics, HIV testing history, and health literacy levels. Of the 482 English-speaking participants, Amazon Mechanical Turk yielded the most participants, recruited participants at the fastest rate and had the highest CER (0.78) and lowest costs / completion. Of the 335 Spanish-speaking participants, Facebook yielded the most participants and recruited participants at the fastest rate, although Amazon Mechanical Turk had the highest CER (0.72) and lowest costs/completion. Across platforms participants differed substantially according to their demographic characteristics, HIV testing history and health literay skills. The study results highlight the need for researchers to strongly consider choice of Internet or social media plaforms when conducting Internet-based research. Because of the sample specifications and cost restraints of studies, specific Internet/ social media or participant selection plaforms will be much more effective or appropriate than others.
Solid state electro-optic color filter and iris
NASA Technical Reports Server (NTRS)
1974-01-01
Test results obtained have confirmed the practicality of the solid state electro-optic filters as an optical control element in a television system. Neutral-density control range in excess of 1000:1 has been obtained on sample filters. Test results, measurements in a complete camera system, discussions of problem areas, analytical comparisons, and recommendations for future investigations are included.
Raes, Filip; Hermans, Dirk; Williams, J. Mark G.; Eelen, Paul
2007-01-01
Overgeneral memory (OGM) has been proposed as a vulnerability factor for depression (Williams et al., 2007) or depressive reactivity to stressful life-events (e.g., Gibbs & Rude, 2004). Traditionally, a cue word procedure known as the Autobiographical Memory Test (AMT; Williams & Broadbent, 1986) is used to assess OGM. Although frequently and validly used in clinical populations, there is evidence suggesting that the AMT is insufficiently sensitive to measure OGM in non-clinical groups. Study 1 evaluated the usefulness of a sentence completion method to assess OGM in non-clinical groups, as an alternative to the AMT. Participants were 197 students who completed the AMT, the Sentence Completion for Events from the Past Test (SCEPT), a depression measure, and visual analogue scales assessing ruminative thinking. Results showed that the mean proportion of overgeneral responses was markedly higher for the SCEPT than for the standard AMT. Also, overgeneral responding on the SCEPT was positively associated to depression scores and depressive rumination scores, whereas overgeneral responding on the AMT was not. Results suggest that the SCEPT, relative to the AMT, is a more sensitive instrument to measure OGM, at least in non-clinical populations. Study 2 further showed that this enhanced sensitivity is most likely due to the omission of the instruction to be specific rather than to the SCEPT's sentence completion format (as opposed to free recall to cue words). PMID:17613793
Raes, Filip; Hermans, Dirk; Williams, J Mark G; Eelen, Paul
2007-07-01
Overgeneral memory (OGM) has been proposed as a vulnerability factor for depression (Williams et al., 2007) or depressive reactivity to stressful life-events (e.g., Gibbs & Rude, 2004). Traditionally, a cue word procedure known as the Autobiographical Memory Test (AMT; Williams & Broadbent, 1986) is used to assess OGM. Although frequently and validly used in clinical populations, there is evidence suggesting that the AMT is insufficiently sensitive to measure OGM in non-clinical groups. Study 1 evaluated the usefulness of a sentence completion method to assess OGM in non-clinical groups, as an alternative to the AMT. Participants were 197 students who completed the AMT, the Sentence Completion for Events from the Past Test (SCEPT), a depression measure, and visual analogue scales assessing ruminative thinking. Results showed that the mean proportion of overgeneral responses was markedly higher for the SCEPT than for the standard AMT. Also, overgeneral responding on the SCEPT was positively associated to depression scores and depressive rumination scores, whereas overgeneral responding on the AMT was not. Results suggest that the SCEPT, relative to the AMT, is a more sensitive instrument to measure OGM, at least in non-clinical populations. Study 2 further showed that this enhanced sensitivity is most likely due to the omission of the instruction to be specific rather than to the SCEPT's sentence completion format (as opposed to free recall to cue words).
Placek, Sarah B; Franklin, Brenton R; Haviland, Sarah M; Wagner, Mercy D; O'Donnell, Mary T; Cryer, Chad T; Trinca, Kristen D; Silverman, Elliott; Matthew Ritter, E
2017-06-01
Using previously established mastery learning standards, this study compares outcomes of training on standard FLS (FLS) equipment with training on an ergonomically different (ED-FLS), but more portable, lower cost platform. Subjects completed a pre-training FLS skills test on the standard platform and were then randomized to train on the FLS training platform (n = 20) or the ED-FLS platform (n = 19). A post-training FLS skills test was administered to both groups on the standard FLS platform. Group performance on the pretest was similar. Fifty percent of FLS and 32 % of ED-FLS subjects completed the entire curriculum. 100 % of subjects completing the curriculum achieved passing scores on the post-training test. There was no statistically discernible difference in scores on the final FLS exam (FLS 93.4, ED-FLS 93.3, p = 0.98) or training sessions required to complete the curriculum (FLS 7.4, ED-FLS 9.8, p = 0.13). These results show that when applying mastery learning theory to an ergonomically different platform, skill transfer occurs at a high level and prepares subjects to pass the standard FLS skills test.
The performance of the Congruence Among Distance Matrices (CADM) test in phylogenetic analysis
2011-01-01
Background CADM is a statistical test used to estimate the level of Congruence Among Distance Matrices. It has been shown in previous studies to have a correct rate of type I error and good power when applied to dissimilarity matrices and to ultrametric distance matrices. Contrary to most other tests of incongruence used in phylogenetic analysis, the null hypothesis of the CADM test assumes complete incongruence of the phylogenetic trees instead of congruence. In this study, we performed computer simulations to assess the type I error rate and power of the test. It was applied to additive distance matrices representing phylogenies and to genetic distance matrices obtained from nucleotide sequences of different lengths that were simulated on randomly generated trees of varying sizes, and under different evolutionary conditions. Results Our results showed that the test has an accurate type I error rate and good power. As expected, power increased with the number of objects (i.e., taxa), the number of partially or completely congruent matrices and the level of congruence among distance matrices. Conclusions Based on our results, we suggest that CADM is an excellent candidate to test for congruence and, when present, to estimate its level in phylogenomic studies where numerous genes are analysed simultaneously. PMID:21388552
Relationship between Spatial Abilities, Mental Rotation and Functional Anatomy Learning
ERIC Educational Resources Information Center
Guillot, Aymeric; Champely, Stephane; Batier, Christophe; Thiriet, Patrice; Collet, Christian
2007-01-01
This study investigated the relationship between visuo-spatial representation, mental rotation (MR) and functional anatomy examination results. A total of 184 students completed the Group Embedded Figures Test (GEFT), Mental Rotation Test (MRT) and Gordon Test of Visual Imagery Control. The time spent on personal assignment was also considered.…
ERIC Educational Resources Information Center
Arasmith, E. E.
Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module provides waste water treatment plant operators with the basic information needed to: (1) successfully run a centrifuge test; (2) accurately read results obtained in test tubes; and (3) obtain…
Testing for Seed Quality in Southern Oaks
F.T. Bonner
1984-01-01
Expressions of germination rate, such as peak value (PV) or mean germination time (MGT), provide good estimates of acorn quality, but test completion requires a minimum of 3 weeks. For more rapid estimates, tetrazolium staining is recommended. Some seed test results were significantly correlated with nursery germination of cherrybark and water oaks, but not with...
RTG performance on Galileo and Ulysses and Cassini test results
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kelly, C.E.; Klee, P.M.
Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Similar comparisons are made for the RTG on the Ulysses spacecraft which completed its planned mission in 1995. Also presented are test results from small scale thermoelectric modules and full scale converters performed for the Cassini program. The Cassini mission to Saturn is scheduled for an October 1997 launch. Small scale module test results on thermoelectric couples from the qualification and flight production runs are shown. These tests have exceeded 19,000more » hours are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. Test results are presented for full scale units both ETGs (E-6, E-7) and RTGs (F-2, F-5) along with mission power predictions. F-5, fueled in 1985, served as a spare for the Galileo and Ulysses missions and plays the same role in the Cassini program. It has successfully completed all acceptance testing. The ten years storage between thermal vacuum tests is the longest ever experienced by an RTG. The data from this test are unique in providing the effects of long term low temperature storage on power output. All ETG and RTG test results to date indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of at least five percent are predicted. {copyright} {ital 1997 American Institute of Physics.}« less
Test Results of the RS-44 Integrated Component Evaluator Liquid Oxygen/Hydrogen Rocket Engine
NASA Technical Reports Server (NTRS)
Sutton, R. F.; Lariviere, B. W.
1993-01-01
An advanced LOX/LH2 expander cycle rocket engine, producing 15,000 lbf thrust for Orbital Transfer Vehicle missions, was tested to determine ignition, transition, and main stage characteristics. Detail design and fabrication of the pump fed RS44 integrated component evaluator (ICE) was accomplished using company discretionary resources and was tested under this contracted effort. Successful demonstrations were completed to about the 50 percent fuel turbopump power level (87,000 RPM), but during this last test, a high pressure fuel turbopump (HPFTP) bearing failed curtailing the test program. No other hardware were affected by the HPFTP premature shutdown. The ICE operations matched well with the predicted start transient simulations. The tests demonstrated the feasibility of a high performance advanced expander cycle engine. All engine components operated nominally, except for the HPFTP, during the engine hot-fire tests. A failure investigation was completed using company discretionary resources.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1978-10-01
The proposed action will consist of drilling one geothermal fluid well for intermittent production testing of 284 days over a three year period. Two disposal wells will initially be drilled to provide disposal of lower volume fluids produced during initial testing. Two additional disposal wells will be drilled, logged, completed, tested, and operated prior to commencement of high volume fluid production. Construction of the proposed action will change the land-use of 2 ha (5 ac) for the test well and each of the injection wells from agriculture or wetlands to resource exploration. Lands will be cleared and erosion and runoffmore » will result. During operation of the well test, the only expected impacts are from venting of gases or flaring of gases and noise. After the tests are completed, the area will be restored as much as possible to its natural condition by revegetation programs using nature species. All sources of pollutants will be collected and disposed in environmentally acceptable ways. Accidents may result from this proposed action.« less
The Validity and Reliability of the Back Saver Sit-and-Reach Test in Middle School Girls and Boys.
ERIC Educational Resources Information Center
Patterson, Patricia; And Others
1996-01-01
This study examined the validity and reliability of the Back Saver Sit-and-Reach test for middle school students. Students completed the test during physical education class. Results indicated that the test was moderately related to hamstring flexibility, but its relationship to lower back flexibility was quite low for both sexes. (SM)
de Groot, Janke F.; Backx, Frank J.G.; Benner, Joyce; Kruitwagen, Cas L.J.J.; Takken, Tim
2017-01-01
Abstract Background Testing aerobic fitness in youth is important because of expected relationships with health. Objective The purpose of the study was to estimate the validity and reliability of the Shuttle Ride Test in youth who have spina bifida and use a wheelchair for mobility and sport. Design Ths study is a validity and reliability study. Methods The Shuttle Ride Test, Graded Wheelchair Propulsion Test, and skill-related fitness tests were administered to 33 participants for the validity study (age = 14.5 ± 3.1 y) and to 28 participants for the reliability study (age = 14.7 ± 3.3 y). Results No significant differences were found between the Graded Wheelchair Propulsion Test and the Shuttle Ride Test for most cardiorespiratory responses. Correlations between the Graded Wheelchair Propulsion Test and the Shuttle Ride Test were moderate to high (r = .55–.97). The variance in peak oxygen uptake (VO2peak) could be predicted for 77% of the participants by height, number of shuttles completed, and weight, with large prediction intervals. High correlations were found between number of shuttles completed and skill-related fitness tests (CI = .73 to −.92). Intraclass correlation coefficients were high (.77–.98), with a smallest detectable change of 1.5 for number of shuttles completed and with coefficients of variation of 6.2% and 6.4% for absolute VO2peak and relative VO2peak, respectively. Conclusions When measuring VO2peak directly by using a mobile gas analysis system, the Shuttle Ride Test is highly valid for testing VO2peak in youth who have spina bifida and use a wheelchair for mobility and sport. The outcome measure of number of shuttles represents aerobic fitness and is also highly correlated with both anaerobic performance and agility. It is not possible to predict VO2peak accurately by using the number of shuttles completed. Moreover, the Shuttle Ride Test is highly reliable in youth with spina bifida, with a good smallest detectable change for the number of shuttles completed. PMID:29029556
B-52B/DTV (Drop Test Vehicle) flight test results: Drop test missions
NASA Technical Reports Server (NTRS)
Doty, L. J.
1985-01-01
The NASA test airplane, B-52B-008, was a carrier for drop tests of the shuttle booster recovery parachute system. The purpose of the test support by Boeing was to monitor the vertical loads on the pylon hooks. The hooks hold the Drop Test Vehicle to the B-52 pylon during drop test missions. The loads were monitored to assure the successful completion of the flight and the safety of the crew.
Pretest information for a test to validate plume simulation procedures (FA-17)
NASA Technical Reports Server (NTRS)
Hair, L. M.
1978-01-01
The results of an effort to plan a final verification wind tunnel test to validate the recommended correlation parameters and application techniques were presented. The test planning effort was complete except for test site finalization and the associated coordination. Two suitable test sites were identified. Desired test conditions were shown. Subsequent sections of this report present the selected model and test site, instrumentation of this model, planned test operations, and some concluding remarks.
Cassini RTG acceptance test results and RTG performance on Galileo and Ulysses
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kelly, C.E.; Klee, P.M.
Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, mass properties (weight and c.g.) and thermal vacuum test. This paper presents the thermal vacuum test results. Three RTGs are to be used, F-2, F-6, and F-7. F-5 is the backup RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at the Mound Laboratory facility metmore » all specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on these tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also shown. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over 5% are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.« less
Cassini RTG acceptance test results and RTG performance on Galileo and Ulysses
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kelly, C.E.; Klee, P.M.
Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, properties (weight and c.g.) and thermal vacuum test. This paper presents The thermal vacuum test results. Three RTGs are to be used, F-2, F-6, and F-7. F-5 is tile back-up RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at die Mound Laboratory facility met allmore » specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on than tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also showing. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over five percent are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.« less
Cassini RTG Acceptance Test Results and RTG Performance on Galileo and Ulysses
DOE R&D Accomplishments Database
Kelly, C. E.; Klee, P. M.
1997-06-01
Flight acceptance testing has been completed for the RTGs to be used on the Cassini spacecraft which is scheduled for an October 6, 1997 launch to Saturn. The acceptance test program includes vibration tests, magnetic field measurements, properties (weight and c.g.) and thermal vacuum test. This paper presents The thermal vacuum test results. Three RTGs are to be used, F 2, F 6, and F 7. F 5 is tile back up RTG, as it was for the Galileo and Ulysses missions launched in 1989 and 1990, respectively. RTG performance measured during the thermal vacuum tests carried out at die Mound Laboratory facility met all specification requirements. Beginning of mission (BOM) and end of mission (EOM) power predictions have been made based on than tests results. BOM power is predicted to be 888 watts compared to the minimum requirement of 826 watts. Degradation models predict the EOM power after 16 years is to be 640 watts compared to a minimum requirement of 596 watts. Results of small scale module tests are also showing. The modules contain couples from the qualification and flight production runs. The tests have exceeded 28,000 hours (3.2 years) and are continuing to provide increased confidence in the predicted long term performance of the Cassini RTGs. All test results indicate that the power requirements of the Cassini spacecraft will be met. BOM and EOM power margins of over five percent are predicted. Power output from telemetry for the two Galileo RTGs are shown from the 1989 launch to the recent Jupiter encounter. Comparisons of predicted, measured and required performance are shown. Telemetry data are also shown for the RTG on the Ulysses spacecraft which completed its planned mission in 1995 and is now in the extended mission.
Lexical Access during the Production of Idiomatic Phrases
ERIC Educational Resources Information Center
Sprenger, Simone A.; Levelt, Willem J. M.; Kempen, Gerard
2006-01-01
In three experiments we test the assumption that idioms have their own lexical entry, which is linked to its constituent lemmas (Cutting & Bock, 1997). Speakers produced idioms or literal phrases (Experiment 1), completed idioms (Experiment 2), or switched between idiom completion and naming (Experiment 3). The results of Experiment 1 show that…
Toya, Waki
2017-01-01
DNA paternity testing has recently become more widely available in Japan. The aim of this paper is to examine the issues surrounding (1) the implementing agency, whether the testing is conducted in a commercial direct-to-consumer (DTC) setting or a judicial non-DTC setting, and (2) the implementation conditions and more specifically the legal capacity of the proband (test subject). Literature research in Japanese and English was conducted. Some countries prohibit commercial DNA testing without the consent of the proband or her or his legally authorized representative. But as in some cases, the results of DTC paternity testing have proven to be unreliable. I propose a complete prohibition of DTC DNA paternity testing in Japan. In many cases of paternity testing, the proband is a minor. This has led to debate about whether proxy consent is sufficient for paternity testing or whether additional safeguards (such as a court order) are required. In cases where commercial DNA testing has been conducted and the test results are produced in court as evidence, the court must judge whether or not to admit these results as evidence. Another important issue is whether or not paternity testing should be legally mandated in certain cases. If we come to the conclusion that DNA test results are the only way to conclusively establish a parent-child relationship, then our society may prioritize even more genetic relatedness over other conceptions of a parent-child relationship. This prioritization could adversely affect families created through assisted reproductive technology (ART), especially in situations where children are not aware of their biological parentage. This paper argues for a complete prohibition of DTC DNA paternity testing in Japan, and highlights that broader ethical and legal deliberation on such genetic services is required.
Aid-Assisted Decision-Making and Colorectal Cancer Screening
Schroy, Paul C.; Emmons, Karen M.; Peters, Ellen; Glick, Julie T.; Robinson, Patricia A.; Lydotes, Maria A.; Mylvaganam, Shamini R.; Coe, Alison M.; Chen, Clara A.; Chaisson, Christine E.; Pignone, Michael P.; Prout, Marianne N.; Davidson, Peter K.; Heeren, Timothy C.
2014-01-01
Background Shared decision-making (SDM) is a widely recommended yet unproven strategy for increasing colorectal cancer (CRC) screening uptake. Previous trials of decision aids to increase SDM and CRC screening uptake have yielded mixed results. Purpose To assess the impact of decision aid–assisted SDM on CRC screening uptake. Design RCT. Setting/participants The study was conducted at an urban, academic safety-net hospital and community health center between 2005 and 2010. Participants were asymptomatic, average-risk patients aged 50–75 years due for CRC screening. Intervention Study participants (n=825) were randomized to one of two intervention arms (decision aid plus personalized risk assessment or decision aid alone) or control arm. The interventions took place just prior to a routine office visit with their primary care providers. Main outcome measures The primary outcome was completion of a CRC screening test within 12 months of the study visit. Logistic regression was used to identify predictors of test completion and mediators of the intervention effect. Analysis was completed in 2011. Results Patients in the decision-aid group were more likely to complete a screening test than control patients (43.1% vs 34.8%; p=0.046) within 12 months of the study visit; conversely, test uptake for the decision aid and decision aid plus personalized risk assessment arms was similar (43.1% vs 37.1%; p=0.15). Assignment to the decision-aid arm (AOR 1.48; 95% CI=1.04, 2.10), black race (AOR 1.52, 95% CI=1.12, 2.06) and a preference for a patient-dominant decisionmaking approach (AOR, 1.55; 95% CI=1.02, 2.35) were independent determinants of test completion. Activation of the screening discussion and enhanced screening intentions mediated the intervention effect. Conclusions Decision aid–assisted SDM has a modest impact on CRC screening uptake. A decision aid plus personalized risk assessment tool is no more effective than a decision aid alone. PMID:23159252
Kim, Hyerin; Kang, NaNa; An, KyuHyeon; Koo, JaeHyung; Kim, Min-Soo
2016-01-01
Design of high-quality primers for multiple target sequences is essential for qPCR experiments, but is challenging due to the need to consider both homology tests on off-target sequences and the same stringent filtering constraints on the primers. Existing web servers for primer design have major drawbacks, including requiring the use of BLAST-like tools for homology tests, lack of support for ranking of primers, TaqMan probes and simultaneous design of primers against multiple targets. Due to the large-scale computational overhead, the few web servers supporting homology tests use heuristic approaches or perform homology tests within a limited scope. Here, we describe the MRPrimerW, which performs complete homology testing, supports batch design of primers for multi-target qPCR experiments, supports design of TaqMan probes and ranks the resulting primers to return the top-1 best primers to the user. To ensure high accuracy, we adopted the core algorithm of a previously reported MapReduce-based method, MRPrimer, but completely redesigned it to allow users to receive query results quickly in a web interface, without requiring a MapReduce cluster or a long computation. MRPrimerW provides primer design services and a complete set of 341 963 135 in silico validated primers covering 99% of human and mouse genes. Free access: http://MRPrimerW.com. PMID:27154272
[In vivo model to evaluate the accuracy of complete-tooth spectrophotometer for dental clinics].
Liu, Feng; Yang, Jian; Xu, Tong-Kai; Xu, Ming-Ming; Ma, Yu
2011-02-01
To test ΔE between measured value and right value from the Crystaleye complete-tooth spectrophotometer, and to evaluate the accuracy rate of the spectrophotometer. Twenty prosthodontists participated in the study. Each of them used Vita 3D-Master shadeguide to do the shade matching, and used Crystaleye complete-tooth spectrophotometer (before and after the test training) tested the middle of eight fixed tabs from shadeguide in the dark box. The results of shade matching and spectrophotometer were recorded. The accuracy rate of shade matching and the spectrophotometer before and after training were calculated. The average accuracy rate of shade matching was 49%. The average accuracy rate of the spectrophotometer before and after training was 83% and 99%. The accuracy of the spectrophotometer was significant higher than that in shade matching, and training can improve the accuracy rate.
Barchi, Francis H; Kasimatis-Singleton, Megan; Kasule, Mary; Khulumani, Pilate; Merz, Jon F
2013-02-01
Little empirical data are available on the extent to which capacity-building programs in research ethics prepare trainees to apply ethical reasoning skills to the design, conduct, or review of research. A randomized controlled trial was conducted in Botswana in 2010 to assess the effectiveness of a case-based intervention using email to augment in-person seminars. University faculty and current and prospective IRB/REC members took part in a semester-long training program in research ethics. Participants attended two 2-day seminars and were assigned at random to one of two on-line arms of the trial. Participants in both arms completed on-line international modules from the Collaborative Institutional Training Initiative. Between seminars, intervention-arm participants were also emailed a weekly case to analyze in response to set questions; responses and individualized faculty feedback were exchanged via email. Tests assessing ethics knowledge were administered at the start of each seminar. The post-test included an additional section in which participants were asked to identify the ethical issues highlighted in five case studies from a list of multiple-choice responses. Results were analyzed using regression and ANOVA. Of the 71 participants (36 control, 35 intervention) enrolled at the first seminar, 41 (57.7%) attended the second seminar (19 control, 22 intervention). In the intervention arm, 19 (54.3%) participants fully completed and 8 (22.9%) partially completed all six weekly cases. The mean score was higher on the post-test (30.3/40) than on the pre-test (28.0/40), and individual post- and pre-test scores were highly correlated (r = 0.65, p < 0.0001). Group assignment alone did not have an effect on test scores (p > 0.84), but intervention-arm subjects who completed all assigned cases answered an average of 3.2 more questions correctly on the post-test than others, controlling for pre-test scores (p = 0.003). Completion of the case-based intervention improved respondents' test scores, with those who completed all six email cases scoring roughly 10% better than those who failed to complete this task and those in the control arm. There was only suggestive evidence that intensive case work improved ethical issue identification, although there was limited ability to assess this outcome due to a high drop-out rate.
Wells, Sue; Rafter, Natasha; Kenealy, Timothy; Herd, Geoff; Eggleton, Kyle; Lightfoot, Rose; Arcus, Kim; Wadham, Angela; Jiang, Yannan; Bullen, Chris
2017-01-01
To assess the effect of a point of care (POC) device for testing lipids and HbA1c in addition to testing by community laboratory facilities (usual practice) on the completion of cardiovascular disease (CVD) risk assessments in general practice. We conducted a pragmatic, cluster randomised controlled trial in 20 New Zealand general practices stratified by size and rurality and randomised to POC device plus usual practice or usual practice alone (controls). Patients aged 35-79 years were eligible if they met national guideline criteria for CVD risk assessment. Data on CVD risk assessments were aggregated using a web-based decision support programme common to each practice. Data entered into the on-line CVD risk assessment form could be saved pending blood test results. The primary outcome was the proportion of completed CVD risk assessments. Qualitative data on practice processes for CVD risk assessment and feasibility of POC testing were collected at the end of the study by interviews and questionnaire. The POC testing was supported by a comprehensive quality assurance programme. A CVD risk assessment entry was recorded for 7421 patients in 10 POC practices and 6217 patients in 10 control practices; 99.5% of CVD risk assessments had complete data in both groups (adjusted odds ratio 1.02 [95%CI 0.61-1.69]). There were major external influences that affected the trial: including a national performance target for CVD risk assessment and changes to CVD guidelines. All practices had invested in systems and dedicated staff time to identify and follow up patients to completion. However, the POC device was viewed by most as an additional tool rather than as an opportunity to review practice work flow and leverage the immediate test results for patient education and CVD risk management discussions. Shortly after commencement, the trial was halted due to a change in the HbA1c test assay performance. The trial restarted after the manufacturing issue was rectified but this affected the end use of the device. Performance incentives and external influences were more powerful modifiers of practice behaviours than the POC device in relation to CVD risk assessment completion. The promise of combining risk assessment, communication and management within one consultation was not realised. With shifts in policy focus, the utility of POC devices for patient engagement in CVD preventive care may be demonstrated if fully integrated into the clinical setting. Australian New Zealand Clinical Trials Registry ACTRN12613000607774.
Minesweeping for Pressure Actuated Mines by Air Injection into a Water Column
2011-09-01
19 B. PROTOTYPE DESIGN USED............................................................ 20 C. PROCEDURES ...Supply Considerations.................................................... 34 C. PROCEDURES ...Chapter III. Chapter IV covers the details of the NPS tow tank facility, testing procedures and results from testing completed in March 2010. Chapter V
US corn and soybeans exploratory experiment
NASA Technical Reports Server (NTRS)
Carnes, J. G. (Principal Investigator)
1981-01-01
The results from the U.S. corn/soybeans exploratory experiment which was completed during FY 1980 are summarized. The experiment consisted of two parts: the classification procedures verification test and the simulated aggregation test. Evaluations of labeling, proportion estimation, and aggregation procedures are presented.
Yoshikawa, Miho; Zhang, Ming; Toyota, Koki
2017-01-01
Complete bioremediation of soils containing multiple volatile organic compounds (VOCs) remains a challenge. To explore the possibility of complete bioremediation through integrated anaerobic-aerobic biodegradation, laboratory feasibility tests followed by alternate anaerobic-aerobic and aerobic-anaerobic biodegradation tests were performed. Chlorinated ethylenes, including tetrachloroethylene (PCE), trichloroethylene (TCE), cis -dichloroethylene ( cis -DCE), and vinyl chloride (VC), and dichloromethane (DCM) were used for anaerobic biodegradation, whereas benzene, toluene, and DCM were used for aerobic biodegradation tests. Microbial communities involved in the biodegradation tests were analyzed to characterize the major bacteria that may contribute to biodegradation. The results demonstrated that integrated anaerobic-aerobic biodegradation was capable of completely degrading the seven VOCs with initial concentration of each VOC less than 30 mg/L. Benzene and toluene were degraded within 8 days, and DCM was degraded within 20 to 27 days under aerobic conditions when initial oxygen concentrations in the headspaces of test bottles were set to 5.3% and 21.0%. Dehalococcoides sp., generally considered sensitive to oxygen, survived aerobic conditions for 28 days and was activated during the subsequent anaerobic biodegradation. However, degradation of cis -DCE was suppressed after oxygen exposure for more than 201 days, suggesting the loss of viability of Dehalococcoides sp., as they are the only known anaerobic bacteria that can completely biodegrade chlorinated ethylenes to ethylene. Anaerobic degradation of DCM following previous aerobic degradation was complete, and yet-unknown microbes may be involved in the process. The findings may provide a scientific and practical basis for the complete bioremediation of multiple contaminants in situ and a subject for further exploration.
NASA Astrophysics Data System (ADS)
Corsi, Gianluca
2011-12-01
Web-based technology has revolutionized the way education is delivered. Although the advantages of online learning appeal to large numbers of students, some concerns arise. One major concern in online science education is the value that participation in labs has on student performance. The purpose of this study was to assess the relationships between lab completion and student academic success as measured by test grades, scientific self-confidence, scientific skills, and concept mastery. A random sample of 114 volunteer undergraduate students, from an online Environmental Science program at the American Public University System, was tested. The study followed a quantitative, non-experimental research design. Paired sample t-tests were used for statistical comparison between pre-lab and post-lab test grades, two scientific skills quizzes, and two scientific self-confidence surveys administered at the beginning and at the end of the course. The results of the paired sample t-tests revealed statistically significant improvements on all post-lab test scores: Air Pollution lab, t(112) = 6.759, p < .001; Home Chemicals lab t(114) = 8.585, p < .001; Water Use lab, t(116) = 6.657, p < .001; Trees and Carbon lab, t(113) = 9.921, p < .001; Stratospheric Ozone lab, t(112) =12.974, p < .001; Renewable Energy lab, t(115) = 7.369, p < .001. The end of the course Scientific Skills quiz revealed statistically significant improvements, t(112) = 8.221, p < .001. The results of the two surveys showed a statistically significant improvement on student Scientific Self-Confidence because of lab completion, t(114) = 3.015, p < .05. Because age and gender were available, regression models were developed. The results indicated weak multiple correlation coefficients and were not statistically significant at alpha = .05. Evidence suggests that labs play a positive role in a student's academic success. It is recommended that lab experiences be included in all online Environmental Science programs, with emphasis on open-ended inquiries, and adoption of online tools to enhance hands-on experiences, such as virtual reality platforms and digital animations. Future research is encouraged to investigate possible correlations between socio-demographic attributes and academic success of students enrolled in online science programs in reference to lab completion.
Prevost, Marie; Carrier, Marie-Eve; Chowne, Gabrielle; Zelkowitz, Phyllis; Joseph, Lawrence; Gold, Ian
2014-01-01
The first aim of our study was to validate the French version of the Reading the Mind in the Eyes test, a theory of mind test. The second aim was to test whether cultural differences modulate performance on this test. A total of 109 participants completed the original English version and 97 participants completed the French version. Another group of 30 participants completed the French version twice, one week apart. We report a similar overall distribution of scores in both versions and no differences in the mean scores between them. However, 2 items in the French version did not collect a majority of responses, which differed from the results of the English version. Test-retest showed good stability of the French version. As expected, participants who do not speak French or English at home, and those born in Asia, performed worse than North American participants, and those who speak English or French at home. We report a French version with acceptable validity and good stability. The cultural differences observed support the idea that Asian culture does not use theory of mind to explain people's behaviours as much as North American people do.
Real-time Optical Alignment and Diagnostic System (ROADS)
NASA Technical Reports Server (NTRS)
1972-01-01
The ultimate and most frequent usage of ROADS will be the alignment of subassemblies (collector and collimator) prior to their installation in a chamber. The system as designed has inherent associated capabilities well applied to acceptance testing of the No. 4 mirror, prediction of in-chamber performance, generation of a catalog of test results and other data, providing data for the plotting of isointensity lines, and other applications which are discussed. The ROADS system will collect, process, display, analyze, and retain data as required for components, partial subassemblies, complete subassemblies, complete modules, and multimodular arrays.
Batty, G David; Der, Geoff; Deary, Ian J
2006-09-01
Numerous studies have reported that maternal cigarette smoking during pregnancy is related to lower IQ scores in the offspring. Confounding is a crucial issue in interpreting this association. In the US National Longitudinal Survey of Youth 1979, IQ was ascertained serially during childhood using the Peabody Individual Achievement Test, the total score for which comprises results on 3 subtests: mathematics, reading comprehension, and reading recognition. Maternal IQ was assessed by using the Armed Forces Qualification Test. There were 5578 offspring (born to 3145 mothers) with complete information for maternal smoking habits, total Peabody Individual Achievement Test score, and covariates. The offspring of mothers who smoked > or = 1 pack of cigarettes per day during pregnancy had an IQ score (Peabody Individual Achievement Test total) that was, on average, 2.87 points lower than children born to nonsmoking mothers. Separate control for maternal education (0.27-IQ-point decrement) and, to a lesser degree, maternal IQ (1.51-IQ-point decrement) led to marked attenuation of the maternal-smoking-offspring-IQ relation. A similar pattern of results was seen when Peabody Individual Achievement Test subtest results were the outcomes of interest. The only exception was the Peabody Individual Achievement Test mathematics score, in which adjusting for maternal IQ essentially led to complete attenuation of the maternal-smoking-offspring-IQ gradient (0.66-IQ-point decrement). The impact of controlling for physical, behavioral, and other social indices was much less pronounced than for maternal education or IQ. These findings suggest that previous studies that did not adjust for maternal education and/or IQ may have overestimated the association of maternal smoking with offspring cognitive ability.
Integrated Data Collection Analysis (IDCA) Program - Final Review September 12, 2012 at DHS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sandstrom, Mary M.; Brown, Geoffrey W.; Warner, Kirstin F.
The Integrated Data Collection Analysis (IDCA) program conducted a final program review at the Department of Homeland Security on September 12, 2012. The review was focused on the results of the program over the complete performance period. A summary presentation delineating the accomplished tasks started the meeting, followed by technical presentations on various issues that arose during the performance period. The presentations were completed with a statistical evaluation of the testing results from all the participants in the IDCA Proficiency Test study. The meeting closed with a discussion of potential sources of funding for continuing work to resolve some ofmore » these technical issues. This effort, funded by the Department of Homeland Security (DHS), put the issues of safe handling of these materials in perspective with standard military explosives. The study added Small-Scale Safety and Thermal (SSST) testing results for a broad suite of different HMEs to the literature, and suggested new guidelines and methods to develop safe handling practices for HMEs. Each participating testing laboratory used identical test materials and preparation methods wherever possible. Note, however, the test procedures differ among the laboratories. The results were compared among the laboratories and then compared to historical data from various sources. The testing performers involved were Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Sandia National Laboratories (SNL), and Air Force Research Laboratory, Tyndall AFB (AFRL/RXQL). These tests were conducted as a proficiency study in order to establish some consistency in test protocols, procedures, and experiments and to compare results when these testing variables cannot be made consistent.« less
Odegard, Timothy N; Koen, Joshua D
2007-11-01
Both positive and negative testing effects have been demonstrated with a variety of materials and paradigms (Roediger & Karpicke, 2006b). The present series of experiments replicate and extend the research of Roediger and Marsh (2005) with the addition of a "none-of-the-above" response option. Participants (n=32 in both experiments) read a set of passages, took an initial multiple-choice test, completed a filler task, and then completed a final cued-recall test (Experiment 1) or multiple-choice test (Experiment 2). Questions were manipulated on the initial multiple-choice test by adding a "none-of-the-above" response alternative (choice "E") that was incorrect ("E" Incorrect) or correct ("E" Correct). The results from both experiments demonstrated that the positive testing effect was negated when the "none-of-the-above" alternative was the correct response on the initial multiple-choice test, but was still present when the "none-of-the-above" alternative was an incorrect response.
An evaluation of grease-type ball bearing lubricants operation in various environments
NASA Technical Reports Server (NTRS)
Mcmurtrey, E. L.
1983-01-01
Because many future spacecraft or space stations will require mechanisms to operate for long periods of time in environments which are adverse to most bearing lubricants, a series of tests is continuing to evaluate 38 grease type lubricants in R-4 size bearings in five different environments for a 1 year period. Four repetitions of each test are made to provide statistical samples. These tests have also been used to select four lubricants for 5 year tests in selected environments with five repetitions of each test for statistical samples. At the present time, 142 test sets have been completed and 30 test sets are underway. The three 5 year tests in (1) continuous operation and (2) start stop operation, with both in vacuum at ambient temperatures, and (3) continuous vacuum operation at 93.3 C are now completed. To date, in both the 1 year and 5 year tests, the best results in all environments have been obtained with a high viscosity index perfluoroalkylpolyether (PFPE) grease.
Small passenger car transmission test; Chevrolet LUV transmission
NASA Technical Reports Server (NTRS)
Bujold, M. P.
1980-01-01
A 1978 Chevrolet LUV manual transmission tested per the applicable portions of a passenger car automatic transmission test code (SAE J65lb) which required drive performance, coast performance, and no load test conditions. Under these test conditions, the transmission attained maximum efficiencies in the upper ninety percent range for both drive performance tests and coast performance tests. The major results of this test (torque, speed, and efficiency curves) are presented. Graphs map the complete performance characteristics for the Chevrolet LUV transmission.
Small passenger car transmission test; Ford C4 transmission
NASA Technical Reports Server (NTRS)
Bujold, M. P.
1980-01-01
A 1979 Ford C4 automatic transmission was tested per a passenger car automatic transmission test code (SAE J651b) which required drive performance, coast performance, and no load test conditions. Under these test conditions, the transmission attained maximum efficiencies in the mid-eighty percent range for both drive performance tests and coast performance tests. The major results of this test (torque, speed, and efficiency curves) are presented. Graphs map the complete performance characteristics for the Ford C4 transmission.
Evaluation of the NASA/JSC Health Related Fitness Program
NASA Technical Reports Server (NTRS)
Wier, Larry T.; Jackson, A. S.; Pinkerton, Mary B.
1989-01-01
The effects of the NASA Health Related Fitness Program (HRFP), which includes a 12-week educational component (EC) and quarterly fitness retests (RT), on the results of periodic testing of fitness, body composition, and blood lipids were evaluated in three goups of pilots. These included the group of compliers (those who completed EC and not less than 75 percent RT), the noncompliers (completed EC and lesss than 75 percent RT), and the dropouts from EC. Results show that beneficial changes in physical activity found two years after the completion of the HRFP were related to both the completion of the EC and the periodic fitness reevaluations. These changes were associated with maximal oxygen consumption, percent body fat, body weight, and blood lipids.
A Gas-Actuated Projectile Launcher for High-Energy Impact Testing of Structures
NASA Technical Reports Server (NTRS)
Ambur, Damodar R.; Jaunky, Navin; Lawson, Robin E.; Knight, Norman F., Jr.; Lyle, Karen H.
1999-01-01
A gas-act,uated penetration device has been developed for high-energy impact testing of structures. The high-energy impact. t,estiiig is for experimental simulation of uncontained engine failures. The non-linear transient finite element, code LS-DYNA3D has been used in the numerical simula.tions of a titanium rectangular blade with a.n aluminum target, plate. Threshold velocities for different combinations of pitch and yaw angles of the impactor were obtained for the impactor-target, t8est configuration in the numerica.1 simulations. Complet,e penet,ration of the target plate was also simulat,ed numerically. Finally, limited comparison of analytical and experimental results is presented for complete penetration of the target by the impactor.
Test of ATLAS RPCs Front-End electronics
NASA Astrophysics Data System (ADS)
Aielli, G.; Camarri, P.; Cardarelli, R.; Di Ciaccio, A.; Di Stante, L.; Liberti, B.; Paoloni, A.; Pastori, E.; Santonico, R.
2003-08-01
The Front-End Electronics performing the ATLAS RPCs readout is a full custom 8 channels GaAs circuit, which integrates in a single die both the analog and digital signal processing. The die is bonded on the Front-End board which is completely closed inside the detector Faraday cage. About 50 000 FE boards are foreseen for the experiment. The complete functionality of the FE boards will be certificated before the detector assembly. We describe here the systematic test devoted to check the dynamic functionality of each single channel and the selection criteria applied. It measures and registers all relevant electronics parameters to build up a complete database for the experiment. The statistical results from more than 1100 channels are presented.
ERIC Educational Resources Information Center
Gilpatrick, Eleanor
This report contains the results of a pilot test which represents the first complete field test of methodological work begun in October 1967 under a Federal grant for the purpose of job analysis in the health services. This 4-year Health Services Mobility Study permitted basic research, field testing, practical application, and policy involvement…
Test of Understanding of Vectors: A Reliable Multiple-Choice Vector Concept Test
ERIC Educational Resources Information Center
Barniol, Pablo; Zavala, Genaro
2014-01-01
In this article we discuss the findings of our research on students' understanding of vector concepts in problems without physical context. First, we develop a complete taxonomy of the most frequent errors made by university students when learning vector concepts. This study is based on the results of several test administrations of open-ended…
Code of Federal Regulations, 2011 CFR
2011-01-01
.... Containment inspection. B. Repordkeeping of test results. I. Introduction One of the conditions of all... following: A. Type A test—1. Pretest requirements. (a) Containment inspection in accordance with V. A. shall.... During the period between the completion of one Type A test and the initiation of the containment...
Transistor step stress program for JANTX2N4150
NASA Technical Reports Server (NTRS)
1979-01-01
Reliability analysis of the transistor JANTX2N4150 manufactured by General Semiconductor and Transitron is reported. The discrete devices were subjected to power and temperature step stress tests and then to electrical tests after completing the power/temperature step stress point. Control sample units were maintained for verification of the electrical parametric testing. Results are presented.
ERIC Educational Resources Information Center
Deary, Ian J.; Whalley, Lawrence J.; Lemmon, Helen; Crawford, J. R.; Starr, John M.
2000-01-01
Tested 101 adults, aged 77, who had completed psychometric intelligence testing in 1932, with the same test of mental ability. Results of this study, the longest follow-up study reported to date, show substantial stability in mental ability differences from childhood to late life. (SLD)
ERIC Educational Resources Information Center
Sanderson, Saskia C.; Wardle, Jane
2005-01-01
The aim of this study was to improve understanding of smokers' potential reactions to genetic testing for smoking-related diseases. One thousand twenty-four respondents completed a postal survey; 186 were smokers. Questions addressed anticipated psychological and behavioral reactions to genetic test results using hypothetical scenarios. Of…
Gonthier, Gerald J.
2011-01-01
Two test wells were completed at Fort Stewart, coastal Georgia, to investigate the potential for using the Lower Floridan aquifer as a source of water to satisfy anticipated, increased water needs. The U.S. Geological Survey, in cooperation with the U.S. Department of the Army, completed hydrologic testing of the Floridan aquifer system at the study site, including flowmeter surveys, slug tests, and 24- and 72-hour aquifer tests by mid-March 2010. Analytical approaches and model simulation were applied to aquifer-test results to provide estimates of transmissivity and hydraulic conductivity of the multilayered Floridan aquifer system. Data from a 24-hour aquifer test of the Upper Floridan aquifer were evaluated by using the straight-line Cooper-Jacob analytical method. Data from a 72-hour aquifer test of the Lower Floridan aquifer were simulated by using axisymmetric model simulations. Results of aquifer testing indicated that the Upper Floridan aquifer has a transmissivity of 100,000 feet-squared per day, and the Lower Floridan aquifer has a transmissivity of 7,000 feet-squared per day. A specific storage for the Floridan aquifer system as a result of model calibration was 3E-06 ft–1. Additionally, during a 72-hour aquifer test of the Lower Floridan aquifer, a drawdown response was observed in two Upper Floridan aquifer wells, one of which was more than 1 mile away from the pumped well.
Progress with variable cycle engines
NASA Technical Reports Server (NTRS)
Westmoreland, J. S.
1980-01-01
The evaluation of components of an advanced propulsion system for a future supersonic cruise vehicle is discussed. These components, a high performance duct burner for thrust augmentation and a low jet noise coannular exhaust nozzle, are part of the variable stream control engine. An experimental test program involving both isolated component and complete engine tests was conducted for the high performance, low emissions duct burner with excellent results. Nozzle model tests were completed which substantiate the inherent jet noise benefit associated with the unique velocity profile possible of a coannular exhaust nozzle system on a variable stream control engine. Additional nozzle model performance tests have established high thrust efficiency levels at takeoff and supersonic cruise for this nozzle system. Large scale testing of these two critical components is conducted using an F100 engine as the testbed for simulating the variable stream control engine.
Team Oriented Robotic Exploration Task on Scorpion and K9 Platforms
NASA Technical Reports Server (NTRS)
Kirchner, Frank
2003-01-01
This final report describes the achievements that have been made in the project over the complete period of performance. The technical progress highlights the different areas of work in terms of Progress in Mechatronics, Sensor integration, Software Development. User Interfaces, Behavior Development and Experimental Results and System Testing. The different areas are: Mechatronics, Sensor integration, Software development, Experimental results and Basic System Testing, Behaviors Development and Advanced System Testing, User Interface and Wireless Communication.
Overcoming fixation with repeated memory suppression.
Angello, Genna; Storm, Benjamin C; Smith, Steven M
2015-01-01
Fixation (blocks to memories or ideas) can be alleviated not only by encouraging productive work towards a solution, but, as the present experiments show, by reducing counterproductive work. Two experiments examined relief from fixation in a word-fragment completion task. Blockers, orthographically similar negative primes (e.g., ANALOGY), blocked solutions to word fragments (e.g., A_L_ _GY) in both experiments. After priming, but before the fragment completion test, participants repeatedly suppressed half of the blockers using the Think/No-Think paradigm, which results in memory inhibition. Inhibiting blockers did not alleviate fixation in Experiment 1 when conscious recollection of negative primes was not encouraged on the fragment completion test. In Experiment 2, however, when participants were encouraged to remember negative primes at fragment completion, relief from fixation was observed. Repeated suppression may nullify fixation effects, and promote creative thinking, particularly when fixation is caused by conscious recollection of counterproductive information.
ERIC Educational Resources Information Center
Carpenter, Dick M., II; Kaka, Sarah J.; Tygret, Jennifer A.; Cathcart, Katy
2018-01-01
This study examines the efficacy of a scholarship program designed to assist single parent, post-freshmen, full time undergraduate students and predictors of success among a sample of said students, where success is defined as progress toward completion, academic achievement, and degree completion. Results of fixed effects regression and…
Preliminary recommendations for seedspotting sugar pine in southwest Oregon.
William I. Stein
1955-01-01
Experiments in seedspotting sugar pine have been conducted for more than 3 years in the South Umpqua drainage of southwestern Oregon. Observations from studies in progress and results of completed studies have indicated some of the necessary requirements for success. Though not complete and fully tested, this information is summarized for use in field projects. Some of...
Dual-test monitoring of hyperglycemia using daily glucose and weekly fructosamine values.
Carter, A W; Borchardt, N; Cooney, M; Greene, D
2001-01-01
The purpose of this study was to assess the impact of using a dual-test blood glucose/fructosamine home monitoring system to assist individuals identified as having the potential for poor glycemic control to achieve values closer to normal. Forty-eight subjects found to have a fasting blood glucose value of > or = 126 mg/dL, casual blood glucose value of > or = 140 mg/dL, and/or blood fructosamine value of > or = 310 micromol/L, agreed to perform daily self testing for 90 days and were provided a dual-test blood glucose/fructosamine home monitoring system and testing supplies at no charge to them. Medication changes/compliance along with dietary and exercise habits were compared to testing results by the principle investigator at approximate 30-day intervals. The desired goal of this project was to achieve and/or maintain a fasting blood glucose value of < or = 110 mg/dL, a casual blood glucose value of < or = 140 mg/dL and a blood fructosamine value of < or = 310 micromol/L by encouraging each individual to realize the effect of dietary intake and exercise habits, and understand the importance of medication compliance, if appropriate, in achieving better overall glycemic control. Four subjects withdrew from the study prior to completion, 11 of the remaining 44 completed 60 days of testing and 33 of 44 completed 90 days of testing. Regular monitoring and counseling achieved an average reduction in blood glucose of 27.5% and a 16.6% reduction in average blood fructosamine when compared to original screening results of these 44 individuals. This study indicates that the addition of weekly fructosamine values to daily blood glucose values provides both the patient and clinician valuable information to evaluate the impact of dietary, exercise, and medication therapy changes on glycemic control by bridging the existing gap between daily blood glucose values and quarterly HbA1c confirmation of intervention results.
Aero-Thermal Calibration of the NASA Glenn Icing Research Tunnel (2012 Test)
NASA Technical Reports Server (NTRS)
Pastor-Barsi, Christine M.; Arrington, E. Allen; VanZante, Judith Foss
2012-01-01
A major modification of the refrigeration plant and heat exchanger at the NASA Glenn Icing Research Tunnel (IRT) occurred in autumn of 2011. It is standard practice at NASA Glenn to perform a full aero-thermal calibration of the test section of a wind tunnel facility upon completion of major modifications. This paper will discuss the tools and techniques used to complete an aero-thermal calibration of the IRT and the results that were acquired. The goal of this test entry was to complete a flow quality survey and aero-thermal calibration measurements in the test section of the IRT. Test hardware that was used includes the 2D Resistive Temperature Detector (RTD) array, 9-ft pressure survey rake, hot wire survey rake, and the quick check survey rake. This test hardware provides a map of the velocity, Mach number, total and static pressure, total temperature, flow angle and turbulence intensity. The data acquired were then reduced to examine pressure, temperature, velocity, flow angle, and turbulence intensity. Reduced data has been evaluated to assess how the facility meets flow quality goals. No icing conditions were tested as part of the aero-thermal calibration. However, the effects of the spray bar air injections on the flow quality and aero-thermal calibration measurements were examined as part of this calibration.
Duque, P; Ibanez, J; Del Barco, A; Sepulcre, J; de Ramon, E; Fernandez-Fernandez, O
2012-03-01
INTRODUCTION. The current batteries such as the Brief Repeatable Battery of Neuropsychological Tests (BRB-N) for evaluating cognitive decline in patients with multiple sclerosis are complex and time-consuming. AIM. To obtain normative values and validate a new battery. SUBJECTS AND METHODS. Four neuropsychological tests were finally included (episodic memory, the Symbol-Digit Modalities Test, a category fluency test, and the Paced Auditory Serial Addition Test). Normative values (overall and by age group) were derived by administering the battery to healthy subjects (5th percentile was the limit of normal). External validity was explored by comparison with the BRB-N. The new battery was also administered to a subsample after 4 weeks to assess reproducibility. RESULTS. To provide normative data, 1036 healthy subjects were recruited. The mean completion time was 18.5 ± 5.2 minutes. For the 229 subjects who were administered the new battery and the BRB-N, no statistically significant differences were found except for mean completion time (19 ± 4 vs 25 ± 5 minutes). In the reproducibility study, there were no significant differences except in the memory tests. CONCLUSION. The scores on the new battery and the BRB-N were strongly correlated although the shorter completion time and ease of administration could make the new battery preferable in clinical practice.
Attitude-referenced radiometer study. Part 2: Primary calibration system
NASA Technical Reports Server (NTRS)
Williamson, W. R.; Otte, A. A.
1971-01-01
A primary calibration system, PCS, for infrared radiometers has been developed, built, and tested. The system allows radiometers to be calibrated with less than 1 percent error for use in earth coverage horizon measurements, earth resources surveys, and synoptic meteorological measurement. The final design, fabrication and test of the PCS are reported. A detailed description of the PCS construction is presented, along with the results of a complete series of functional tests. Test to verify the source thermal characteristics, collimator reflectance, and output beam characteristics are described and their results presented.
Ivask, Angela; Scheckel, Kirk G; Kapruwan, Pankaj; Stone, Vicki; Yin, Hong; Voelcker, Nicolas H; Lombi, Enzo
2017-03-01
Here, we present evidence on complete transformation of ZnO and CuO nanoparticles, which are among the most heavily studied metal oxide particles, during 24 h in vitro toxicological testing with human T-lymphocytes. Synchrotron radiation-based X-ray absorption near edge structure (XANES) spectroscopy results revealed that Zn speciation profiles of 30 nm and 80 nm ZnO nanoparticles, and ZnSO 4 - exposed cells were almost identical with the prevailing species being Zn-cysteine. This suggests that ZnO nanoparticles are rapidly transformed during a standard in vitro toxicological assay, and are sequestered intracellularly, analogously to soluble Zn. Complete transformation of ZnO in the test conditions was further supported by almost identical Zn spectra in medium to which ZnO nanoparticles or ZnSO 4 was added. Likewise, Cu XANES spectra for CuO and CuSO 4 -exposed cells and cell culture media were similar. These results together with our observation on similar toxicological profiles of ZnO and soluble Zn, and CuO and soluble Cu, underline the importance of dissolution and subsequent transformation of ZnO and CuO nanoparticles during toxicological testing and provide evidence that the nano-specific effect of ZnO and CuO nanoparticles is negligible in this system. We strongly suggest to account for this aspect when interpreting the toxicological results of ZnO and CuO nanoparticles.
Maraia Capsule Flight Testing and Results for Entry, Descent, and Landing
NASA Technical Reports Server (NTRS)
Sostaric, Ronald R.; Strahan, Alan L.
2016-01-01
The Maraia concept is a modest size (150 lb., 30" diameter) capsule that has been proposed as an ISS based, mostly autonomous earth return capability to function either as an Entry, Descent, and Landing (EDL) technology test platform or as a small on-demand sample return vehicle. A flight test program has been completed including high altitude balloon testing of the proposed capsule shape, with the purpose of investigating aerodynamics and stability during the latter portion of the entry flight regime, along with demonstrating a potential recovery system. This paper includes description, objectives, and results from the test program.
Thermal Vacuum/Balance Test Results of Swift BAT with Loop Heat Pipe Thermal System
NASA Technical Reports Server (NTRS)
Choi, Michael K.
2004-01-01
The Swift Burst Alert Telescope (BAT) Detector Array is thermally well coupled to eight constant conductance heat pipes (CCHPs) embedded in the Detector Array Plate PAP), and two loop heat pipes (LHPs) transport heat from the CCHPs to a radiator. The CCHPs have ammonia as the working fluid and the LHPs have propylene as the working fluid. Precision heater controllers, which have adjustable set points in flight, are used to control the LHP compensation chamber and Detector Array xA1 ASIC temperatures. The radiator has AZ-Tek's AZW-LA-II low solar absorptance white paint as the thermal coating, and is located on the anti-sun side of the spacecraft. A thermal balance (T/B) test on the BAT was successfully completed. It validated that the thermal design satisfies the temperature requirements of the BAT in the flight thermal environments. Instrument level and observatory level thermal vacuum (TN) cycling tests of the BAT Detector Array by using the LHP thermal system were successfully completed. This paper presents the results of the T/B test and T N cycling tests.
Thermal Performance of Low Layer Density Multilayer Insu1ation Using Liquid Nitrogen
NASA Technical Reports Server (NTRS)
Johnson, Wesley L.; Fesmire, James E.
2011-01-01
In order to support long duration cryogenic propellant storage, the Cryogenic Fluid Management (CFM) Project of the Exploration Technology Development Program (ETDP) is investigating the long duration storage propertie$ of liquid methane on the lunar surface. The Methane Lunar Surface Thermal Control (MLSTC) testing is using a tank of the approximate dimensions of the Altair ascent tanks inside of a vacuum chamber to simulate the environment in low earth orbit and on the lunar surface. The thermal performance testing of multilayer insulation (MLI) coupons that are fabricated identically to the tank applied insulation is necessary to understand the performance of the blankets and to be able to predict the performance of the insulation prior to testing. This coupon testing was completed in Cryostat-100 at the Cryogenics Test Laboratory. The results showed the properties of the insulation as a function of layer density, number of layers, and warm boundary temperature. These results aid in the understanding of the performance parameters o fMLI and help to complete the body of literature on the topic.
3. COMPLETE X15 VEHICLE TEST STAND, LOCATED IN SOUTHEAST ¼ ...
3. COMPLETE X-15 VEHICLE TEST STAND, LOCATED IN SOUTHEAST ¼ OF X-15 ENGINE TEST COMPLEX. Looking northeast. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA
Clinical trials transparency and the Trial and Experimental Studies Transparency (TEST) act.
Logvinov, Ilana
2014-03-01
Clinical trial research is the cornerstone for successful advancement of medicine that provides hope for millions of people in the future. Full transparency in clinical trials may allow independent investigators to evaluate study designs, perform additional analysis of data, and potentially eliminate duplicate studies. Current regulatory system and publishers rely on investigators and pharmaceutical industries for complete and accurate reporting of results from completed clinical trials. Legislation seems to be the only way to enforce mandatory disclosure of results. The Trial and Experimental Studies Transparency (TEST) Act of 2012 was introduced to the legislators in the United States to promote greater transparency in research industry. Public safety and advancement of science are the driving forces for the proposed policy change. The TEST Act may benefit the society and researchers; however, there are major concerns with participants' privacy and intellectual property protection. Copyright © 2014 Elsevier Inc. All rights reserved.
Loss to Follow-Up from HIV Screening to ART Initiation in Rural China.
Gu, Diane; Mao, Yurong; Tang, Zhenzhu; Montaner, Julio; Shen, Zhiyong; Zhu, Qiuying; Detels, Roger; Jin, Xia; Xiong, Ran; Xu, Juan; Ling, Walter; Erinoff, Lynda; Lindblad, Robert; Liu, David; Van Veldhuisen, Paul; Hasson, Albert; Wu, Zunyou
2016-01-01
Patients who are newly screened HIV positive by EIA are lost to follow-up due to complicated HIV testing procedures. Because this is the first step in care, it affects the entire continuum of care. This is a particular concern in rural China. To assess the routine HIV testing completeness and treatment initiation rates at 18 county-level general hospitals in rural Guangxi. We reviewed original hospital HIV screening records. Investigators also engaged with hospital leaders and key personnel involved in HIV prevention activities to characterize in detail the routine care practices in place at each county. 699 newly screened HIV-positive patients between January 1 and June 30, 2013 across the 18 hospitals were included in the study. The proportion of confirmatory testing across the 18 hospitals ranged from 14% to 87% (mean of 43%), and the proportion of newly diagnosed individuals successfully initiated antiretroviral treatment across the hospitals ranged from 3% to 67% (mean of 23%). The average interval within hospitals for individuals to receive the Western Blot (WB) and CD4 test results from HIV positive screening (i.e. achieving testing completion) ranged from 14-116 days (mean of 41.7 days) across the hospitals. The shortest interval from receiving a positive EIA screening test result to receiving WB and CD4 testing and counseling was 0 day and the longest was 260 days. The proportion of patients newly screened HIV positive that completed the necessary testing procedures for HIV confirmation and received ART was very low. Interventions are urgently needed to remove barriers so that HIV patients can have timely access to HIV/AIDS treatment and care in rural China.
Cohall, Alwyn T; Dini, Sheila; Senathirajah, Yalini; Nye, Andrea; Neu, Natalie; Powell, Donald; Powell, Borris; Hyden, Christel
2008-01-01
Significant advances in the treatment of human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) place a premium on early detection and linkage to care. Recognizing the need to efficiently yet comprehensively provide HIV counseling, we assessed the feasibility of using audio computer-assisted self-inventory (A-CASI) in a community-based HIV counseling and testing facility. A convenience sample of 50 adults presenting for HIV testing was recruited to complete an 85-item computerized HIV Assessment of Risk Inventory (HARI) containing domains of demographics, sexual behaviors, alcohol and substance use, emotional well-being, past experiences with HIV testing, and attitudes about taking HARI. Client acceptance rate was limited by the completion time outlined during the intake process. However, the majority of respondents who completed HARI felt that it took only a short to moderate time to complete and was easy to understand. A majority also reported a preference for using a computerized format in the future. Further, HARI identified a number of risk-taking behaviors, including unprotected anal sex and substance use prior to past sexual encounters. Additionally, more than half of the sample reported moderate to severe depressive symptoms. Those respondents who had time to complete the survey accepted the A-CASI interview, and it was successful at identifying a substantial level of risk-taking behaviors. A-CASI has the potential to guide HIV counselors in providing risk-reduction counseling and referral activities. However, results suggested the need to shorten the instrument, and further studies are needed to determine applicability in other HIV testing sites.
Laboratory measurements of on-board subsystems
NASA Technical Reports Server (NTRS)
Nuspl, P. P.; Dong, G.; Seran, H. C.
1991-01-01
Good progress was achieved on the test bed for on-board subsystems for future satellites. The test bed is for subsystems developed previously. Four test setups were configured in the INTELSAT technical labs: (1) TDMA on-board modem; (2) multicarrier demultiplexer demodulator; (3) IBS/IDR baseband processor; and (4) baseband switch matrix. The first three series of tests are completed and the tests on the BSM are in progress. Descriptions of test setups and major test results are included; the format of the presentation is outlined.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1977-12-14
The purpose of this test was to demonstrate that the alternator stator has satisfactorily completed sufficient testing to safisfy the requirements set forth within the Kilowatt Isotope Power System (KIPS) Component Test Specification for the GDS Alternator Stator (TS 2538). The results of the acceptance tests conducted on the alternator stator, S/N 003, are presented, and show that the stator did meet specified requirements.
NASA Technical Reports Server (NTRS)
Stefko, George L.; Rose, Gayle E.; Podboy, Gary G.
1987-01-01
High speed wind tunnel aerodynamic performance tests of the SR-7A advanced prop-fan have been completed in support of the Prop-Fan Test Assessment (PTA) flight test program. The test showed that the SR-7A model performed aerodynamically very well. At the cruise design condition, the SR-7A prop fan had a high measured net efficiency of 79.3 percent.
Kompala, T; Moll, A P; Mtungwa, N; Brooks, R P; Friedland, G H; Shenoi, S V
2016-08-11
HIV testing, diagnosis and treatment programs have expanded globally, particularly in resource-limited settings. Diagnosis must be followed by determination of treatment eligibility and referral to care prior to initiation of antiretroviral treatment (ART). However, barriers and delays along these early steps in the treatment cascade may impede successful ART initiation. New strategies are needed to facilitate the treatment cascade. We evaluated the role of on site CD4+ T cell count phlebotomy services by nurses in facilitating pre-ART care in a community-based voluntary counseling and testing program (CBVCT) in rural South Africa. We retrospectively evaluated CBVCT services during five continuous time periods over three years: three periods when a nurse was present on site, and two periods when the nurse was absent. When a nurse was present, CD4 count phlebotomy was performed immediately after HIV testing to determine ART eligibility. When a nurse was absent, patients were referred to their local primary care clinic for CD4 testing. For each period, we determined the proportion of HIV-positive community members who completed CD4 testing, received notification of CD4 count results, as well as the time to test completion and result notification. Between 2010 and 2013, 7213 individuals accessed CBVCT services; of these, 620 (8.6 %) individuals were HIV-positive, 205 (33.1 %) were eligible for ART according to South African national CD4 count criteria, and 78 (38.0 % of those eligible) initiated ART. During the periods when a professional nurse was available to provide CD4 phlebotomy services, HIV-positive clients were significantly more likely to complete CD4 testing than during periods when these services were not available (85.5 % vs. 37.3 %, p < 0.001). Additionally, when nurses were present, individuals were significantly more likely to be notified of CD4 results (60.6 % vs. 26.7 %, p <0.001). The time from HIV screening to CD4 test completion was also significantly shorter during nurse presence than nurse absence (median 8 days (IQR 4-19) vs. 35 days (IQR 15-131), p < 0.001). These findings indicate that in addition to CBVCT, availability of on site CD4 phlebotomy may reduce loss along the pre-ART care cascade and facilitate timely entry into HIV care.
Thermal Analysis of Low Layer Density Multilayer Insulation Test Results
NASA Technical Reports Server (NTRS)
Johnson, Wesley L.
2011-01-01
Investigation of the thermal performance of low layer density multilayer insulations is important for designing long-duration space exploration missions involving the storage of cryogenic propellants. Theoretical calculations show an analytical optimal layer density, as widely reported in the literature. However, the appropriate test data by which to evaluate these calculations have been only recently obtained. As part of a recent research project, NASA procured several multilayer insulation test coupons for calorimeter testing. These coupons were configured to allow for the layer density to be varied from 0.5 to 2.6 layer/mm. The coupon testing was completed using the cylindrical Cryostat-l00 apparatus by the Cryogenics Test Laboratory at Kennedy Space Center. The results show the properties of the insulation as a function of layer density for multiple points. Overlaying these new results with data from the literature reveals a minimum layer density; however, the value is higher than predicted. Additionally, the data show that the transition region between high vacuum and no vacuum is dependent on the spacing of the reflective layers. Historically this spacing has not been taken into account as thermal performance was calculated as a function of pressure and temperature only; however the recent testing shows that the data is dependent on the Knudsen number which takes into account pressure, temperature, and layer spacing. These results aid in the understanding of the performance parameters of MLI and help to complete the body of literature on the topic.
Prevalence and correlates of physical fitness testing in U.S. schools--2000.
Morrow, James R; Fulton, Janet E; Brener, Nancy D; Kohl, Harold W
2008-06-01
Because of the perceived lack of youth physical fitness and/or concerns for increased obesity, physical education teachers are interested in youth fitness and physical activity levels. Statewide mandates are being developed that require school-based teachers to complete physical fitness testing. Data from the nationally representative School Health Policies and Programs Study 2000 were analyzed to investigate the prevalence of fitness testing and the professional characteristics of fitness test users. Data were collected with teachers of either randomly selected classes in elementary schools and randomly selected required physical education courses in middle/junior high and senior high schools (N = 1,564). The prevalence of fitness test use is 65% across all school levels. Variables associated with physical fitness test usage were professionally oriented. Results showed that teachers in secondary schools (odds ratio [OR] = 2.25, 95% confidence interval [CI] = I.18-4.27), those with degrees in physical education/kinesiology-related disciplines (OR = 2.01, 95% CI = 1.11-3.63), and those who had completed staff development on physical fitness testing (OR = 3.22, 95% CI = 1.86-5.60) were more likely than respondents without these characteristics to engage in physical fitness testing. Results changed little when separate analyses were conducted for classes/courses in districts requiring versus not requiring fitness testing. Financial variables, including fitness-oriented facilities available, metropolitan location, and discretionary expenditures per student, were not associated with fitness test use. Results provided national prevalence of school-based physical fitness testing use in the U. S. and conveyed information about those who currently use physical fitness tests.
Strategy Choice Mediates the Link between Auditory Processing and Spelling
Kwong, Tru E.; Brachman, Kyle J.
2014-01-01
Relations among linguistic auditory processing, nonlinguistic auditory processing, spelling ability, and spelling strategy choice were examined. Sixty-three undergraduate students completed measures of auditory processing (one involving distinguishing similar tones, one involving distinguishing similar phonemes, and one involving selecting appropriate spellings for individual phonemes). Participants also completed a modified version of a standardized spelling test, and a secondary spelling test with retrospective strategy reports. Once testing was completed, participants were divided into phonological versus nonphonological spellers on the basis of the number of words they spelled using phonological strategies only. Results indicated a) moderate to strong positive correlations among the different auditory processing tasks in terms of reaction time, but not accuracy levels, and b) weak to moderate positive correlations between measures of linguistic auditory processing (phoneme distinction and phoneme spelling choice in the presence of foils) and spelling ability for phonological spellers, but not for nonphonological spellers. These results suggest a possible explanation for past contradictory research on auditory processing and spelling, which has been divided in terms of whether or not disabled spellers seemed to have poorer auditory processing than did typically developing spellers, and suggest implications for teaching spelling to children with good versus poor auditory processing abilities. PMID:25198787
Testing the Gossamer Albatross II
NASA Technical Reports Server (NTRS)
1980-01-01
The Gossamer Albatross II is seen here during a test flight at NASA's Dryden Flight Research Center, Edwards, California. The original Gossamer Albatross is best known for completing the first completely human powered flight across the English Channel on June 12, 1979. The Albatross II was the backup craft for the Channel flight. It was fitted with a small battery-powered electric motor and flight instruments for the NASA research program in low-speed flight. NASA completed its flight testing of the Gossamer Albatross II and began analysis of the results in April, 1980. During the six week program, 17 actual data gathering flights and 10 other flights were flown here as part of the joint NASA Langley/Dryden flight research program. The lightweight craft, carrying a miniaturized instrumentation system, was flown in three configurations; using human power, with a small electric motor, and towed with the propeller removed. Results from the program contributed to data on the unusual aerodynamic, performance, stability, and control characteristics of large, lightweight aircraft that fly at slow speeds for application to future high altitude aircraft. The Albatross' design and research data contributed to numerous later high altitude projects, including the Pathfinder.
Strategy choice mediates the link between auditory processing and spelling.
Kwong, Tru E; Brachman, Kyle J
2014-01-01
Relations among linguistic auditory processing, nonlinguistic auditory processing, spelling ability, and spelling strategy choice were examined. Sixty-three undergraduate students completed measures of auditory processing (one involving distinguishing similar tones, one involving distinguishing similar phonemes, and one involving selecting appropriate spellings for individual phonemes). Participants also completed a modified version of a standardized spelling test, and a secondary spelling test with retrospective strategy reports. Once testing was completed, participants were divided into phonological versus nonphonological spellers on the basis of the number of words they spelled using phonological strategies only. Results indicated a) moderate to strong positive correlations among the different auditory processing tasks in terms of reaction time, but not accuracy levels, and b) weak to moderate positive correlations between measures of linguistic auditory processing (phoneme distinction and phoneme spelling choice in the presence of foils) and spelling ability for phonological spellers, but not for nonphonological spellers. These results suggest a possible explanation for past contradictory research on auditory processing and spelling, which has been divided in terms of whether or not disabled spellers seemed to have poorer auditory processing than did typically developing spellers, and suggest implications for teaching spelling to children with good versus poor auditory processing abilities.
Educational Gaming for Pharmacy Students - Design and Evaluation of a Diabetes-themed Escape Room.
Eukel, Heidi N; Frenzel, Jeanne E; Cernusca, Dan
2017-09-01
Objective. To design an educational game that will increase third-year professional pharmacy students' knowledge of diabetes mellitus disease management and to evaluate their perceived value of the game. Methods. Faculty members created an innovative educational game, the diabetes escape room. An authentic escape room gaming environment was established through the use of a locked room, an escape time limit, and game rules within which student teams completed complex puzzles focused on diabetes disease management. To evaluate the impact, students completed a pre-test and post-test to measure the knowledge they've gained and a perception survey to identify moderating factors that could help instructors improve the game's effectiveness and utility. Results. Students showed statistically significant increases in knowledge after completion of the game. A one-sample t -test indicated that students' mean perception was statistically significantly higher than the mean value of the evaluation scale. This statically significant result proved that this gaming act offers a potential instructional benefit beyond its novelty. Conclusion. The diabetes escape room proved to be a valuable educational game that increased students' knowledge of diabetes mellitus disease management and showed a positive perceived overall value by student participants.
Series-Bosch Technology for Oxygen Recovery During Lunar or Martian Surface Missions
NASA Technical Reports Server (NTRS)
Abney, Morgan B.; Mansell, J. Matthew; Rabenberg, Ellen; Stanley, Christine M.; Edmunson, Jennifer; Alleman, James E.; Chen, Kevin; Dumez, Sam
2014-01-01
Long-duration surface missions to the Moon or Mars will require life support systems that maximize resource recovery to minimize resupply from Earth. To address this need, NASA previously proposed a Series-Bosch (S-Bosch) oxygen recovery system, based on the Bosch process, which can theoretically recover 100% of the oxygen from metabolic carbon dioxide. Bosch processes have the added benefits of the potential to recover oxygen from atmospheric carbon dioxide and the use of regolith materials as catalysts, thereby eliminating the need for catalyst resupply from Earth. In 2012, NASA completed an initial design for an S-Bosch development test stand that incorporates two catalytic reactors in series including a Reverse Water-Gas Shift (RWGS) Reactor and a Carbon Formation Reactor (CFR). In 2013, fabrication of system components, with the exception of a CFR, and assembly of the test stand was initiated. Stand-alone testing of the RWGS reactor was completed to compare performance with design models. Continued testing of Lunar and Martian regolith simulants provided sufficient data to design a CFR intended to utilize these materials as catalysts. Finally, a study was conducted to explore the possibility of producing bricks from spent regolith catalysts. The results of initial demonstration testing of the RWGS reactor, results of continued catalyst performance testing of regolith simulants, and results of brick material properties testing are reported. Additionally, design considerations for a regolith-based CFR are discussed.
Series-Bosch Technology for Oxygen Recovery During Lunar or Martian Surface Missions
NASA Technical Reports Server (NTRS)
Abney, Morgan B.; Mansell, James M.; Stanley, Christine; Edmunson, Jennifer; Dumez, Samuel; Chen, Kevin; Alleman, James E.
2014-01-01
Long-duration surface missions to the Moon or Mars will require life support systems that maximize resource recovery to minimize resupply from Earth. To address this need, NASA previously proposed a Series-Bosch (S-Bosch) oxygen recovery system, based on the Bosch process, which can theoretically recover 100% of the oxygen from metabolic carbon dioxide. Bosch processes have the added benefits of the potential to recover oxygen from atmospheric carbon dioxide and the use of regolith materials as catalysts, thereby eliminating the need for catalyst resupply from Earth. In 2012, NASA completed an initial design for an S-Bosch development test stand that incorporates two catalytic reactors in series including a Reverse Water-Gas Shift (RWGS) Reactor and a Carbon Formation Reactor (CFR). In 2013, fabrication of system components, with the exception of a CFR, and assembly of the test stand was initiated. Stand-alone testing of the RWGS reactor was completed to compare performance with design models. Continued testing of Lunar and Martian regolith simulants provided sufficient data to design a CFR intended to utilize these materials as catalysts. Finally, a study was conducted to explore the possibility of producing bricks from spend regolith catalysts. The results of initial demonstration testing of the RWGS reactor, results of continued catalyst performance testing of regolith simulants, and results of brick material properties testing are reported. Additionally, design considerations for a regolith-based CFR are discussed.
Marzulli, F; Maguire, H C
1982-02-01
Several guinea-pig predictive test methods were evaluated by comparison of results with those obtained with human predictive tests, using ten compounds that have been used in cosmetics. The method involves the statistical analysis of the frequency with which guinea-pig tests agree with the findings of tests in humans. In addition, the frequencies of false positive and false negative predictive findings are considered and statistically analysed. The results clearly demonstrate the superiority of adjuvant tests (complete Freund's adjuvant) in determining skin sensitizers and the overall superiority of the guinea-pig maximization test in providing results similar to those obtained by human testing. A procedure is suggested for utilizing adjuvant and non-adjuvant test methods for characterizing compounds as of weak, moderate or strong sensitizing potential.
Shah, Farhan Khalid; Gebreel, Ashraf; Elshokouki, Ali hamed; Habib, Ahmed Ali
2012-01-01
PURPOSE To compare the changes in the occlusal vertical dimension, activity of masseter muscles and biting force after insertion of immediate denture constructed with conventional, tooth-supported and Implant-supported immediate mandibular complete denture. MATERIALS AND METHODS Patients were selected and treatment was carried out with all the three different concepts i.e, immediate denture constructed with conventional (Group A), tooth-supported (Group B) and Implant-supported (Group C) immediate mandibular complete dentures. Parameters of evaluation and comparison were occlusal vertical dimension measured by radiograph (at three different time intervals), Masseter muscle electromyographic (EMG) measurement by EMG analysis (at three different positions of jaws) and bite force measured by force transducer (at two different time intervals). The obtained data were statistically analyzed by using ANOVA-F test at 5% level of significance. If the F test was significant, Least Significant Difference test was performed to test further significant differences between variables. RESULTS Comparison between mean differences in occlusal vertical dimension for tested groups showed that it was only statistically significant at 1 year after immediate dentures insertion. Comparison between mean differences in wavelet packet coefficients of the electromyographic signals of masseter muscles for tested groups was not significant at rest position, but significant at initial contact position and maximum voluntary clench position. Comparison between mean differences in maximum biting force for tested groups was not statistically significant at 5% level of significance. CONCLUSION Immediate complete overdentures whether tooth or implant supported prosthesis is recommended than totally mucosal supported prosthesis. PMID:22737309
Tokas, Theodoros; Gözen, Ali Serdar; Avgeris, Margaritis; Tschada, Alexandra; Fiedler, Marcel; Klein, Jan; Rassweiler, Jens
2017-10-01
Posture, vision, and instrumentation limitations are the main predicaments of conventional laparoscopy. To combine the ETHOS surgical chair, the three-dimensional laparoscope, and the Radius Surgical System manipulators, and compare the system with conventional laparoscopy and da Vinci in terms of task completion times and discomfort. Fifteen trainees performed the three main laparoscopic suturing tasks of the Heilbronn training program (IV: simulation of dorsal venous complex suturing; V: circular suturing of tubular structure; and VI: urethrovesical anastomosis) in a pelvi trainer. The tasks were performed conventionally, utilizing the three devices, and robotically. Task completion times were recorded and the surgeon discomfort was evaluated using questionnaires. Task completion times were compared using nonparametric Wilcoxon signed rank test and ergonomic scores were compared using Pearson chi-square test. The use of the full laparoscopic set (ETHOS chair, three-dimensional laparoscopic camera, Radius Surgical System needle holders), resulted in a significant improvement of the completion time of the three tested tasks compared with conventional laparoscopy (p<0.001) and similar to da Vinci surgery. After completing Tasks IV, V, and VI conventionally, 12 (80%), 13 (86.7%), and 13 (86.7%) of the 15 trainees, respectively, reported heavy total discomfort. The full laparoscopic system nullified heavy discomfort for Tasks IV and V and minimized it (6.7%) for the most demanding Task VI. Especially for Task VI, all trainees gained benefit, by using the system, in terms of task completion times and discomfort. The limited trainee robotic experience and the questionnaire subjectivity could be a potential limitation. The ergonomic laparoscopic system offers significantly improved task completion times and ergonomy than conventional laparoscopy. Furthermore, it demonstrates comparable results to robotic surgery. The study was conducted in a pelvi trainer and no patients were recruited. Copyright © 2016 European Association of Urology. Published by Elsevier B.V. All rights reserved.
Technical Evaluation Motor No. 7 (TEM-7)
NASA Technical Reports Server (NTRS)
Hughes, Phil
1991-01-01
The Technical Evaluation Motor No. 7 (TEM-7) test was a full-scale, full duration static test firing of a high performance motor-configuration solid rocket motor with nozzle vectoring. The final test report documents the procedures, performance, and results of the static test firing of TEM-7. All observations, discussions, conclusions, and recommendations included in the report are complete and final except for the TEM-7 fixed housing unbond investigation. A presentation and discussion of TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107, Rev A, Space Shuttle Technical Evaluation Motor No. 7 (TEM-7) Static Fire Test Plan are included.
Endurance testing of a 30-cm Kaufman thruster
NASA Technical Reports Server (NTRS)
Collett, C. R.
1973-01-01
Results of a program to demonstrate lifetime capability of a 30-cm Kaufman ion thruster with a 6000 hour endurance test are described. Included in the program are (1) thruster fabrication, (2) design and construction of a test console containing a transistorized high frequency power processor, and control circuits which provide unattended automatic operation of the thruster, and (3) modification of a vacuum facility to incorporate a frozen mercury collector and permit unattended operation. Four tests ranging in duration from 100 to 1100 hours have been completed. These tests and the resulting thruster modifications are described. The status of the endurance test is also presented.
Use of a Self-Instructional Radiographic Anatomy Module for Dental Hygiene Faculty Calibration.
Brame, Jennifer L; AlGheithy, Demah Salem; Platin, Enrique; Mitchell, Shannon H
2017-06-01
Purpose: Dental hygiene educators often provide inconsistent instruction in clinical settings and various attempts to address the lack of consistency have been reported in the literature. The purpose of this pilot study was to determine if the use of a use of a self-instructional, radiographic anatomy (SIRA) module improved DH faculty calibration regarding the identifica-tion of normal intraoral and extraoral radiographic anatomy and whether its effect could be sustained over a period of four months. Methods: A convenience sample consisting of all dental hygiene faculty members involved in clinical instruction (N=23) at the University of North Carolina (UNC) was invited to complete the four parts of this online pilot study: a pre-test, review of the SIRA module, an immediate post-test, and a four-month follow-up post-test. Descriptive analyses, the Friedman's ANOVA, and the exact form of the Wilcoxon-Signed-Rank test were used to an-alyze the data. Level of significance was set at 0.05. Participants who did not complete all parts of the study were omitted from data analysis comparing the pre to post-test performance. Results: The pre-test response rate was 73.9% (N=17), and 88.2% (N=15) of those initial participants completed both the immediate and follow-up post-tests. Faculty completing all parts of the study consisted of: 5 full-time faculty, 5 part-time faculty, and 5 graduate teaching assistants. The Friedman's ANOVA revealed no statistically significant difference (P=0.179) in percentages of correct responses between the three tests (pre, post and follow-up). The exact form of the Wilcoxon-Signed-Rank test revealed marginal significance when comparing percent of correct responses at pre-test and immediate post-test (P=0.054), and no statistically significant difference when comparing percent of correct responses at immediate post-test and the follow-up post-test four months later (P=0.106). Conclusions: Use of a SIRA module did not significantly affect DH faculty test performance. Lack of statistical significance in the percentages of correct responses between the three tests may have been affected by the small number of participants completing all four parts of the study (N=15). Additional research is needed to identify and improve methods for faculty calibration. Copyright © 2017 The American Dental Hygienists’ Association.
The applicability of the catalytic wet-oxidation to CELSS
NASA Technical Reports Server (NTRS)
Takahashi, Y.; Nitta, K.; Ohya, H.; Oguchi, M.
1987-01-01
The wet oxidation catalysis of Au, Pd, Pt, Rh or Ru on a ceramic honeycomb carrier was traced in detail by 16 to 20 repetitive batch tests each. As a result, Pt or Pd on a honeycomb carrier was shown to catalyze complete nitrogen gasification as N2. Though the catalysts which realize both complete nitrogen gasification and complete oxidation could not be found, the Ru+Rh catalyst was found to be most promising. Ru honeycomb catalyzed both nitrification and nitrogen gasification.
5. FLAME DEFLECTOR, COMPLETE X15 VEHICLE TEST STAND. Looking east. ...
5. FLAME DEFLECTOR, COMPLETE X-15 VEHICLE TEST STAND. Looking east. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA
Santiago, Ruben D; Bazan, Jose A; Brown, Nicole V; Adkins, Eric J; Shirk, Mary Beth
2016-10-01
Background: Accurate and timely review of microbiological test results is a core component of antimicrobial stewardship. There is documented success of these programs in the inpatient setting; however, emergency department (ED) patients are typically not included in these initiatives. Objectives: To assess the impact of an emergency medicine pharmacist (EMP)-facilitated review process of positive microbiological test results from patients discharged from the ED as measured by time to positive result review and number of indicated interventions completed. Methods: This was a retrospective study that compared EMP-facilitated to ED charge nurse (CN)-facilitated physician review of randomly selected positive microbiological test results. Groups were compared concurrently within the time frame of July 1, 2012 through December 31, 2012. Results: One hundred seventy-eight positive microbiological test results were included (EMP, n = 91; CN, n = 87). The median (IQR) time to initial review was 3 (1.0-6.3) hours for the EMP and 2 (0.3-5.5) hours for the CN group ( p = .35). Four percent (1/25) of indicated interventions were not completed in the EMP group versus 47% (14/30) in the CN group ( p = .0004). Conclusion: An EMP was significantly less likely to miss an intervention when indicated with no difference in time to review of positive microbiological results. These findings support the role of the EMP in antimicrobial stewardship in the ED.
Joseph, R.L.; Eberts, S.M.
1994-01-01
In 1988, the Geological Survey (USGS) began study to examine the hydrogeologic framework, ground-water-flow systems, water chemistry, and withdrawal response of aquifers in glacial deposits and carbonate rock in the Midwestern Basins and Arches Region in western Ohio and eastern Indiana. As part of this study, data from pumped-well tests and instantaneous-rechange tests (slug tests) of wells completed in the glacial-deposit and carbonate-rock aquifers were compiled from reports and information on file with State agencies, environmental consulting firms, drilling firms, municipalities, universities, and the USGS. The data, from 73 counties in Ohio and Indiana, were entered into a computerized data base in a spreadsheet format and subsequently into a geographic information system (GIS). Aquifer-characteristics data from this compilation include the results of 105 pumped-well tests and 39 slug tests in wells completed in glacial deposits, 174 pumped-well tests in wells completed in the carbonate-rock aquifer, and 4 slug tests in wells completed in limestones and shales of Ordovician age. Transmissivities from the pumped-well tests in wells completed in glacial till and glacial-deposit aquifers (sands and gravels) range from 1.54 to 69,700 feet squared per day. Storage coefficients or specific yields range from 0.00002 to 0.38 at these wells. Horizontal-hydraulic conductivities from the slug tests in wells completed in glacial-deposit aquifers range from 0.33 to 1,000 feet per day. Transmissivities from the pumped-well tests in wells completed in the carbonate-rock aquifer range from 70 to 52,000 feet squared per day. Storage coefficient or specific yields at these wells range from 0.00001 to 0.05. Horizontal hydraulic conductivities from the slug tests in wells completed in limestones and shales of Ordovician age range from 0.0016 to 12 feet per day. These data are summarized in tables and figures within this report. The collection and compilation of selected aquifer-characteristic data for the glacial-deposit and carbonate-rock aquifers within the Midwestern Basin and Arches Region of Shaver (1985) are an essential part of the Midwestern Basins and Arches Regional Aquifer-Systems Analysis (Midwestern Basins and Arches RASA) project of the U.S. Geological Survey (USGS). Specifically, the data are needed to help describe ground-water flow in the regional aquifer system, which isone of the objectives of the Midwestern Basins and Arches RASA project (Bugliosi, 1990). To meet this objective, the Midwestern Basins and Arches RASA began subprojects in the Ohio and Indiana offices of the USGS to collect and compile available aquifer-characteristics data from aquifer tests of the glacial-deposit and carbonate-rock aquifers. The data were not reanalyzed to verify accuracy because of time constraints and insufficient data in many cases.
An update on the Deep Space 1 power system: SCARLET integration and test results
DOE Office of Scientific and Technical Information (OSTI.GOV)
Allen, D.M.; Murphy, D.M.
1998-07-01
The Solar Concentrator Arrays with Refractive Linear Element Technology (SCARLET) system for the Deep Space 1 (DS1) spacecraft have been completed and delivered to JPL for integration with the spacecraft. This paper describes the array assembly, the qualification test program, and the results of the qualification tests. The array will provide power to the DS1 spacecraft and its NSTAR ion electric propulsion system. Launch is scheduled for October, 1998 from Kennedy Space Center, FL.
Component qualification and initial build of the AGT 100 advanced automotive gas turbine
NASA Technical Reports Server (NTRS)
Johnson, R. A.
1983-01-01
In advance of initial dynamometer testing of the AGT 100 engine, all prime components and subsystems were bench/rig tested. Included were compressor, combustor, turbines, regenerator, ceramic components, and electronic control system. Results are briefly reviewed. Initial engine buildup was completed and rolled-out for test cell installation in July 1982. Shakedown testing included motoring and sequential firing of the combustor's three fuel nozzles.
A 7700 hour endurance test of a 30-cm Kaufman thruster
NASA Technical Reports Server (NTRS)
Collett, C. R.
1975-01-01
This paper describes an ongoing endurance test of the ion thruster which is expected to form the basis of future prime propulsion systems. The purpose of the test is to demonstrate the lifetime capability of such critical components as cathodes, vaporizers, isolators, and optics. The endurance test was preceded by development of an ion engine life test system and several intermediate duration tests. The elements of the test system are briefly described and the thruster modifications which resulted from the intermediate tests are evaluated in terms of the endurance test results. Thruster performance during the endurance test is described as well as the conclusions that can be drawn from the 8600 hours that have been completed as of March 6, 1975.
Krisa, L; Gaughan, J; Vogel, L; Betz, R R; Mulcahey, M J
2013-01-01
A prospective repeated measures multicenter study to determine reliability at individual spinal levels when applied to young persons with spinal cord injury (SCI). To evaluate intra- and inter-rater agreement of repeated motor and sensory scores at individual spinal levels. Shriners Hospitals for Children--Philadelphia and Chicago, USA. A total 189 youth with complete and incomplete SCI underwent four neurological exams by two different raters. Agreement between and within raters for each myotome and dermatome was evaluated for complete and incomplete SCI separately. Intraclass correlation coefficients and 95% confidence intervals were calculated. Overall, both intra- and inter-rater agreement resulted in moderate-to-high agreement among myotomes. Subjects with complete SCI had moderate agreement for light touch (LT) and pin prick (PP) testing, whereas subjects with incomplete SCI had >60.0% of dermatomes resulting in poor agreement for PP testing. Overall, moderate-to-high agreement was found for muscle strength comparisons and moderate-to-poor agreement was found for PP and LT.
Invitro Study on the Fluid From Banana Stem Bioprocess as Direct Fed Microbial
NASA Astrophysics Data System (ADS)
Mutaqin, B. K.; Tanuwiria, U. H.; Hernawan, E.
2018-02-01
The purpose of this research was to study the liquid produced by the bioprocess of banana stem as a Direct Fed Microbial (DFM) in order to enhance local sheep productivity invitro. Studying was the use of DFM in two invitro feeds. The object observed in this research was fermentability and digestibility value. The method was experimental with the experimental design, i.e. factorial experimental design with two factors. The first factor was DFM, the levels of which were 0, 0,2, 0,4 and 0,6%, while the second factor was two feed types (complete feed and Pennisetum purpureum only) with the treatment of threefold repetition. This research showed that fermentability and digestibility value were influenced by the DFM in the invitro complete feed. The research result analyzed using MANOVA with further testing using Duncan Test. The conclusion of the research result were shows the interaction DFM in the complete feed improve fermentability and digestibility values and DFM 0,6% shows the highest value.
Calibration of the Langley 16-foot transonic tunnel with test section air removal
NASA Technical Reports Server (NTRS)
Corson, B. W., Jr.; Runckel, J. F.; Igoe, W. B.
1974-01-01
The Langley 16-foot transonic tunnel with test section air removal (plenum suction) was calibrated to a Mach number of 1.3. The results of the calibration, including the effects of slot shape modifications, test section wall divergence, and water vapor condensation, are presented. A complete description of the wind tunnel and its auxiliary equipment is included.
JT90 Ceramic Outer Air Seal System Refinement Program, Phase 2
NASA Technical Reports Server (NTRS)
Shiembob, L. T.
1982-01-01
The sprayed ceramic gas turbine outer air seal system was tested in two JT9D engines to substantiate the abradability and durability of the seals. Of particular significance was that one of the tests, a 150 hour 1000 cycle endurance program at nominal JT9D operating conditions, was completed with minimal effect on the seals and received Federal Aviation Administration cognizance with respect to potential field service use by the airlines. The other engine test completed 1825 endurance cycles at severe operating conditions and no burn through or other serious defects in the structural integrity of a seal segment was observed. These test results combined with other Pratt and Whitney Aircraft engine tests substantiate the potential of the ceramic outer air seal system to attain the durability goal of 50000 hour engine operating capability. Both engine tests subjected the seals to intentional blade rubs and demonstrated good abradability with volume wear ratios greater than 100, far exceeding the design goal of 10. The improved volume wear ratio will allow the turbine tip clearance to be reduced, thereby resulting in an estimated thrust specific fuel consumption improvement of 0.3 percent.
6. AN EARLY VIEW OF THE COMPLETE X15 VEHICLE TEST ...
6. AN EARLY VIEW OF THE COMPLETE X-15 VEHICLE TEST STAND. Looking to the northeast. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA
NASA GRC Technology Development Project for a Stirling Radioisotope Power System
NASA Technical Reports Server (NTRS)
Thieme, Lanny G.; Schreiber, Jeffrey G.
2000-01-01
NASA Glenn Research Center (GRC), the Department of Energy (DOE), and Stirling Technology Company (STC) are developing a Stirling convertor for an advanced radioisotope power system to provide spacecraft on-board electric power for NASA deep space missions. NASA GRC is conducting an in-house project to provide convertor, component, and materials testing and evaluation in support of the overall power system development. A first characterization of the DOE/STC 55-We Stirling Technology Demonstration Convertor (TDC) under the expected launch random vibration environment was recently completed in the NASA GRC Structural Dynamics Laboratory. Two TDCs also completed an initial electromagnetic interference (EMI) characterization at NASA GRC while being tested in a synchronized, opposed configuration. Materials testing is underway to support a life assessment of the heater head, and magnet characterization and aging tests have been initiated. Test facilities are now being established for an independent convertor performance verification and technology development. A preliminary Failure Mode Effect Analysis (FMEA), initial finite element analysis (FEA) for the linear alternator, ionizing radiation survivability assessment, and radiator parametric study have also been completed. This paper will discuss the status, plans, and results to date for these efforts.
Large liquid rocket engine transient performance simulation system
NASA Technical Reports Server (NTRS)
Mason, J. R.; Southwick, R. D.
1989-01-01
Phase 1 of the Rocket Engine Transient Simulation (ROCETS) program consists of seven technical tasks: architecture; system requirements; component and submodel requirements; submodel implementation; component implementation; submodel testing and verification; and subsystem testing and verification. These tasks were completed. Phase 2 of ROCETS consists of two technical tasks: Technology Test Bed Engine (TTBE) model data generation; and system testing verification. During this period specific coding of the system processors was begun and the engineering representations of Phase 1 were expanded to produce a simple model of the TTBE. As the code was completed, some minor modifications to the system architecture centering on the global variable common, GLOBVAR, were necessary to increase processor efficiency. The engineering modules completed during Phase 2 are listed: INJTOO - main injector; MCHBOO - main chamber; NOZLOO - nozzle thrust calculations; PBRNOO - preburner; PIPE02 - compressible flow without inertia; PUMPOO - polytropic pump; ROTROO - rotor torque balance/speed derivative; and TURBOO - turbine. Detailed documentation of these modules is in the Appendix. In addition to the engineering modules, several submodules were also completed. These submodules include combustion properties, component performance characteristics (maps), and specific utilities. Specific coding was begun on the system configuration processor. All functions necessary for multiple module operation were completed but the SOLVER implementation is still under development. This system, the Verification Checkout Facility (VCF) allows interactive comparison of module results to store data as well as provides an intermediate checkout of the processor code. After validation using the VCF, the engineering modules and submodules were used to build a simple TTBE.
Integration of a Community Pharmacy Simulation Program into a Therapeutics Course.
Shin, Jaekyu; Tabatabai, Daryush; Boscardin, Christy; Ferrone, Marcus; Brock, Tina
2018-02-01
Objective. To demonstrate the feasibility of integrating the computer simulation, MyDispense, into a therapeutics course and to measure its effects on student perception and learning. Methods. We conducted a prospective study with an experimental phase and an implementation phase. In the first phase, students were randomized to complete a therapeutics case using MyDispense or traditional paper methods in class. In the second phase, all students completed two therapeutic cases using MyDispense in class with the option to complete four additional outside-of-class cases using MyDispense. Students completed pre- and post-tests in class and three surveys. Results. In the experimental phase, mean test scores increased from pre- to post-test for both MyDispense and traditional paper groups, but the difference between the groups was not statistically significant. Students in the traditional paper group reported statistically significant gains in confidence compared to the MyDispense group. In the implementation phase, mean test scores again increased, however, student perception of the use of MyDispense for therapeutics was negative. Completing the optional outside-of-class cases, however, was positively and significantly correlated with the midterm and final examination scores. Conclusion. Implementation of MyDispense in therapeutics may be feasible and has positive effects (eg, correlation with exam scores, capacity for immediate feedback, and potential for effective self-study). With short-term use and in the absence of assessment methods that also require seeking information from patients, students prefer to learn via traditional paper cases.
Measuring the Impact of Cultural Competence Training for Dental Hygiene Students.
Daugherty, Heather N; Kearney, Rachel C
2017-10-01
Purpose: The purpose of this study was to measure the change in levels of knowledge of providing culturally competent care and self-assessed cultural competence of senior level dental hygiene students after the implementation of an online cultural competence training module. Methods: Twenty-eight members of the senior class of 31 dental hygiene students (N=28) volunteered to participate in this IRB approved study at the Ohio State University School of Dentistry. The students took the online Inventory for Assessing the Process of Cultural Competence- Student Version (IAPCC-SV), to assess their self-perceived cultural competence. Upon completion of the pre-test, students then completed the United States Department of Health and Human Services (HHS) Office of Minority Health (OMH) Cultural Competency Program for Oral Health Professionals; a three-module online training program designed to measure increased knowledge of cultural competence. Three weeks following the initial pre-test and upon completion of the Cultural Competency Program for Oral Health Professionals online learning modules, students re-took the IAPCC-SV. Results: Twenty-eight senior dental hygiene students completed the IAPCC-SV pre-test, the OMH e-learning modules and the IAPCC-SV post-test. The average score on the pre-test was 55.14±7.54 and the average score on the post-test was 61.33±7.86. There was a significant difference in pre-test and post-test scores (p<0.001). There were also significant differences in the constructs of knowledge of cultural competence (p<0.001) and skill (p<0.001). Conclusion: The HHS OMH Cultural Competency Program for Oral Health Professionals was effective for increasing dental hygiene students' levels of knowledge of cultural competence. Copyright © 2017 The American Dental Hygienists’ Association.
Quinn, Terence J; Livingstone, Iain; Weir, Alexander; Shaw, Robert; Breckenridge, Andrew; McAlpine, Christine; Tarbert, Claire M
2018-01-01
Visual impairment affects up to 70% of stroke survivors. We designed an app (StrokeVision) to facilitate screening for common post stroke visual issues (acuity, visual fields, and visual inattention). We sought to describe the test time, feasibility, acceptability, and accuracy of our app-based digital visual assessments against (a) current methods used for bedside screening and (b) gold standard measures. Patients were prospectively recruited from acute stroke settings. Index tests were app-based assessments of fields and inattention performed by a trained researcher. We compared against usual clinical screening practice of visual fields to confrontation, including inattention assessment (simultaneous stimuli). We also compared app to gold standard assessments of formal kinetic perimetry (Goldman or Octopus Visual Field Assessment); and pencil and paper-based tests of inattention (Albert's, Star Cancelation, and Line Bisection). Results of inattention and field tests were adjudicated by a specialist Neuro-ophthalmologist. All assessors were masked to each other's results. Participants and assessors graded acceptability using a bespoke scale that ranged from 0 (completely unacceptable) to 10 (perfect acceptability). Of 48 stroke survivors recruited, the complete battery of index and reference tests for fields was successfully completed in 45. Similar acceptability scores were observed for app-based [assessor median score 10 (IQR: 9-10); patient 9 (IQR: 8-10)] and traditional bedside testing [assessor 10 (IQR: 9-10); patient 10 (IQR: 9-10)]. Median test time was longer for app-based testing [combined time to completion of all digital tests 420 s (IQR: 390-588)] when compared with conventional bedside testing [70 s, (IQR: 40-70)], but shorter than gold standard testing [1,260 s, (IQR: 1005-1,620)]. Compared with gold standard assessments, usual screening practice demonstrated 79% sensitivity and 82% specificity for detection of a stroke-related field defect. This compares with 79% sensitivity and 88% specificity for StrokeVision digital assessment. StrokeVision shows promise as a screening tool for visual complications in the acute phase of stroke. The app is at least as good as usual screening and offers other functionality that may make it attractive for use in acute stroke. https://ClinicalTrials.gov/ct2/show/NCT02539381.
Kim, Hyerin; Kang, NaNa; An, KyuHyeon; Koo, JaeHyung; Kim, Min-Soo
2016-07-08
Design of high-quality primers for multiple target sequences is essential for qPCR experiments, but is challenging due to the need to consider both homology tests on off-target sequences and the same stringent filtering constraints on the primers. Existing web servers for primer design have major drawbacks, including requiring the use of BLAST-like tools for homology tests, lack of support for ranking of primers, TaqMan probes and simultaneous design of primers against multiple targets. Due to the large-scale computational overhead, the few web servers supporting homology tests use heuristic approaches or perform homology tests within a limited scope. Here, we describe the MRPrimerW, which performs complete homology testing, supports batch design of primers for multi-target qPCR experiments, supports design of TaqMan probes and ranks the resulting primers to return the top-1 best primers to the user. To ensure high accuracy, we adopted the core algorithm of a previously reported MapReduce-based method, MRPrimer, but completely redesigned it to allow users to receive query results quickly in a web interface, without requiring a MapReduce cluster or a long computation. MRPrimerW provides primer design services and a complete set of 341 963 135 in silico validated primers covering 99% of human and mouse genes. Free access: http://MRPrimerW.com. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.
Goodwin, Donald J; Mazurek, Gerald H; Campbell, Brandon H; Bohanon, Jamaria; West, Kevin B; Bell, James J; Powell, Richard; Toney, Sean; Morris, John A; Yamane, Grover K; Sjoberg, Paul A
2014-03-01
We automated portions of the QuantiFERON-TB Gold In-Tube test (QFT-GIT) and assessed its quality when performed concurrently with the tuberculin skin test (TST) among U.S. Air Force basic military trainees (BMTs). The volume of blood collected for QFT-GIT was monitored. At least one of the three tubes required for QFT-GIT had blood volume outside the recommended 0.8- to 1.2-mL range for 688 (29.0%) of 2,373 subjects who had their blood collected. Of the 2,124 subjects who had TST and QFT-GIT completed, TST was positive for 0.6%; QFT-GIT was positive for 0.3% and indeterminate for 2.0%. Among 2,081 subjects with completed TST and determinate QFT-GIT results, overall agreement was 99.5% but positive agreement was 5.6%. Specificity among the 1,546 low-risk BMTs was identical (99.7%). Indeterminate QFT-GIT results were 2.7 times more likely when mitogen tubes contained >1.2 mL blood than when containing 0.8- to 1.2-mL blood. Automation can facilitate QFT-GIT completion, especially if the recommended volume of blood is collected. Mycobacterium tuberculosis infection prevalence among BMTs based on TST and QFT-GIT is similar and low. Selectively testing those with significant risk may be more appropriate than universal testing of all recruits. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.
Development and Test Evaluations for Ni-DOBDC Metal Organic Framework (MOF) Engineered Forms
DOE Office of Scientific and Technical Information (OSTI.GOV)
Troy G. Garn; Mitchell Greenhalgh
2013-07-01
A joint effort to prepare engineered forms of a Ni-DOBDC metal organic framework (MOF) was completed with contributions from PNNL, SNL and the INL. Two independent methods were used at INL and SNL to prepare engineered form (EF) sorbents from Ni-DOBDC MOF powder developed and prepared at PNNL. Xe and Kr capacity test evaluations were performed at ambient temperature with the cryostat experimental setup at INL. The initial INL EF MOF test results indicated a Xe capacity of 1.6 mmol/kg sorbent and no Kr capacity. A large loss of surface area also occurred during minimal testing rendering the INL EFmore » MOF unusable. Four capacity tests were completed using the SNL EF MOF at ambient temperature and resulted in Xe capacities of 1.4, 4.2, 5.0 and 3.8 mmol/kg sorbent with no Kr capacity observed in any ambient temperature tests. Two additional capacity tests were performed at 240 K to further evaluate SNL EF MOF performance. Xe capacities of 50.7 and 49.3 mmol/kg of sorbent and Kr capacities of 0.77 and 0.69 mmol/kg of sorbent were obtained, respectively. Following the adsorption evaluations, the SNL EF MOF material had lost about 40 % of the initial mass and 40 % of the initial surface area. In general, the Xe capacity results at ambient temperature for the INL and SNL EF Ni-DOBDC MOF’s were lower than 9.8 mmol Xe/kg sorbent test results reported by INL in FY-12 using PNNL’s inital EF supplied material.« less
NASA Technical Reports Server (NTRS)
1979-01-01
The performance test results of the final under-the-wing engine configuration are presented. One hundred and six hours of engine operation were completed, including mechanical and performance checkout, baseline acoustic testing with a bellmouth inlet, reverse thrust testing, acoustic technology tests, and limited controls testing. The engine includes a variable pitch fan having advanced composite fan blades and using a ball-spline pitch actuation system.
Space station propulsion test bed
NASA Technical Reports Server (NTRS)
Briley, G. L.; Evans, S. A.
1989-01-01
A test bed was fabricated to demonstrate hydrogen/oxygen propulsion technology readiness for the intital operating configuration (IOC) space station application. The test bed propulsion module and computer control system were delivered in December 1985, but activation was delayed until mid-1986 while the propulsion system baseline for the station was reexamined. A new baseline was selected with hydrogen/oxygen thruster modules supplied with gas produced by electrolysis of waste water from the space shuttle and space station. As a result, an electrolysis module was designed, fabricated, and added to the test bed to provide an end-to-end simulation of the baseline system. Subsequent testing of the test bed propulsion and electrolysis modules provided an end-to-end demonstration of the complete space station propulsion system, including thruster hot firings using the oxygen and hydrogen generated from electrolysis of water. Complete autonomous control and operation of all test bed components by the microprocessor control system designed and delivered during the program was demonstrated. The technical readiness of the system is now firmly established.
High temperature cyclic oxidation data. Part 1: Turbine alloys
NASA Technical Reports Server (NTRS)
Barrett, Charles A.; Garlick, Ralph G.; Lowell, Carl E.
1989-01-01
Specific-weight-change-versus-time data and x ray diffraction results are presented derived from high temperature cyclic tests on high temperature, high strength nickel-base gamma/gamma prime and cobalt-base turbine alloys. Each page of data summarizes a complete test on a given alloy sample.
Attachment, Self-Esteem and Test Anxiety in Adolescence and Early Adulthood
ERIC Educational Resources Information Center
Dan, Orrie; Bar Ilan, Omrit; Kurman, Jenny
2014-01-01
The purpose of this study was to assess how attachment dimensions (anxiety and avoidance), self-esteem, and three subscales of test anxiety--cognitive obstruction, social derogation and tenseness are related in two age groups: adolescents and college students. Participants (N?=?327) completed relevant questionnaires. Results showed that college…
78 FR 78740 - Isopyrazam; Pesticide Tolerances
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-27
... access the OCSPP test guidelines referenced in this document electronically, please go to http://www.epa.gov/ocspp and select ``Test Methods and Guidelines.'' C. How can I file an objection or hearing... validity, completeness, and reliability as well as the relationship of the results of the studies to human...
Bible Knowledge and Moral Judgment: Knowing Scripture and Using Ethical Reasoning
ERIC Educational Resources Information Center
Nelson, Daniel
2004-01-01
The relationship between moral judgment and religious knowledge was investigated, with an analysis of the impact of academic skill on both domains. Fifty-six Bible college seniors completed measures of moral judgment (Defining Issues Test), Bible knowledge (Standardized Bible Content Test), and academic skill (Academic Profile). Results indicate…
The Lasting Effects of Introductory Economics Courses.
ERIC Educational Resources Information Center
Sanders, Philip
1980-01-01
Reports research which tests the Stigler Hypothesis. The hypothesis suggests that students who have taken introductory economics courses and those who have not show little difference in test performance five years after completing college. Results of the author's research illustrate that economics students do retain some knowledge of economics…
77 FR 71796 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-04
... pre- and post-analytic laboratory medicine practices that are effective at improving health care... of laboratory tests available certainly warrant such a model. The Laboratory Medicine Best Practices... evidence reviews using published literature, and completed a proof-of-concept test. Results of an extensive...
Measuring attention in very old adults using the Test of Everyday Attention.
van der Leeuw, Guusje; Leveille, Suzanne G; Jones, Richard N; Hausdorff, Jeffrey M; McLean, Robert; Kiely, Dan K; Gagnon, Margaret; Milberg, William P
2017-09-01
There is a need for validated measures of attention for use in longitudinal studies of older populations. We studied 249 participants aged 80 to 101 years using the population-based MOBILIZE Boston Study. Four subscales of the Test of Everyday Attention (TEA) were included, measuring attention switching, selective, sustained and divided attention and a neuropsychological battery including validated measures of multiple cognitive domains measuring attention, executive function and memory. The TEA previously has not been validated in persons aged 80 and older. Among participants who completed the TEA, scores on other attentional measures strongly with TEA domains (R=.60-.70). Proportions of participants with incomplete TEA subscales ranged from 8% (selective attention) to 19% (attentional switching). Reasons for not completing TEA tests included failure to comprehend test instructions despite repetition and practice. These results demonstrate the challenges and potential value of the Test of Everyday Attention in studies of very old populations.
Reliability of a science admission test (HAM-Nat) at Hamburg medical school
Hissbach, Johanna; Klusmann, Dietrich; Hampe, Wolfgang
2011-01-01
Objective: The University Hospital in Hamburg (UKE) started to develop a test of knowledge in natural sciences for admission to medical school in 2005 (Hamburger Auswahlverfahren für Medizinische Studiengänge, Naturwissenschaftsteil, HAM-Nat). This study is a step towards establishing the HAM-Nat. We are investigating parallel forms reliability, the effect of a crash course in chemistry on test results, and correlations of HAM-Nat test results with a test of scientific reasoning (similar to a subtest of the "Test for Medical Studies", TMS). Methods: 316 first-year students participated in the study in 2007. They completed different versions of the HAM-Nat test which consisted of items that had already been used (HN2006) and new items (HN2007). Four weeks later half of the participants were tested on the HN2007 version of the HAM-Nat again, while the other half completed the test of scientific reasoning. Within this four week interval students were offered a five day chemistry course. Results: Parallel forms reliability for four different test versions ranged from rtt=.53 to rtt=.67. The retest reliabilities of the HN2007 halves were rtt=.54 and rtt =.61. Correlations of the two HAM-Nat versions with the test of scientific reasoning were r=.34 und r=.21. The crash course in chemistry had no effect on HAM-Nat scores. Conclusions: The results suggest that further versions of the test of natural sciences will not easily conform to the standards of internal consistency, parallel-forms reliability and retest reliability. Much care has to be taken in order to assemble items which could be used interchangeably for the construction of new test versions. The test of scientific reasoning and the HAM-Nat are tapping different constructs. Participation in a chemistry course did not improve students’ achievement, probably because the content of the course was not coordinated with the test and many students lacked of motivation to do well in the second test. PMID:21866246
NASA Technical Reports Server (NTRS)
Fasching, W. A.
1979-01-01
The short core exhaust nozzle was evaluated in CF6-50 engine ground tests including performance, acoustic, and endurance tests. The test results verified the performance predictions from scale model tests. The short core exhaust nozzle provides an internal cruise sfc reduction of 0.9 percent without an increase in engine noise. The nozzle hardware successfully completed 1000 flight cycles of endurance testing without any signs of distress.
Accelerator Test of an Imaging Calorimeter
NASA Technical Reports Server (NTRS)
Christl, Mark J.; Adams, James H., Jr.; Binns, R. W.; Derrickson, J. H.; Fountain, W. F.; Howell, L. W.; Gregory, J. C.; Hink, P. L.; Israel, M. H.; Kippen, R. M.;
2001-01-01
The Imaging Calorimeter for ACCESS (ICA) utilizes a thin sampling calorimeter concept for direct measurements of high-energy cosmic rays. The ICA design uses arrays of small scintillating fibers to measure the energy and trajectory of the produced cascades. A test instrument has been developed to study the performance of this concept at accelerator energies and for comparison with simulations. Two test exposures have been completed using a CERN test beam. Some results from the accelerator tests are presented.
Esplen, Mary Jane; Cappelli, Mario; Wong, Jiahui; Bottorff, Joan L; Hunter, Jon; Carroll, June; Dorval, Michel; Wilson, Brenda; Allanson, Judith; Semotiuk, Kara; Aronson, Melyssa; Bordeleau, Louise; Charlemagne, Nicole; Meschino, Wendy
2013-01-01
Objectives To develop a brief, reliable and valid instrument to screen psychosocial risk among those who are undergoing genetic testing for Adult-Onset Hereditary Disease (AOHD). Design A prospective two-phase cohort study. Setting 5 genetic testing centres for AOHD, such as cancer, Huntington's disease or haemochromatosis, in ambulatory clinics of tertiary hospitals across Canada. Participants 141 individuals undergoing genetic testing were approached and consented to the instrument development phase of the study (Phase I). The Genetic Psychosocial Risk Instrument (GPRI) developed in Phase I was tested in Phase II for item refinement and validation. A separate cohort of 722 individuals consented to the study, 712 completed the baseline package and 463 completed all follow-up assessments. Most participants were female, at the mid-life stage. Individuals in advanced stages of the illness or with cognitive impairment or a language barrier were excluded. Interventions Phase I: GPRI items were generated from (1) a review of the literature, (2) input from genetic counsellors and (3) phase I participants. Phase II: further item refinement and validation were conducted with a second cohort of participants who completed the GPRI at baseline and were followed for psychological distress 1-month postgenetic testing results. Primary and secondary outcome measures GPRI, Hamilton Depression Rating Scale (HAM-D), Hamilton Anxiety Rating Scale (HAM-A), Brief Symptom Inventory (BSI) and Impact of Event Scale (IES). Results The final 20-item GPRI had a high reliability—Cronbach's α at 0.81. The construct validity was supported by high correlations between GPRI and BSI and IES. The predictive value was demonstrated by a receiver operating characteristic curve of 0.78 plotting GPRI against follow-up assessments using HAM-D and HAM-A. Conclusions With a cut-off score of 50, GPRI identified 84% of participants who displayed distress postgenetic testing results, supporting its potential usefulness in a clinical setting. PMID:23485718
Smartlowit-Briggs, Lucy; Pearson, Cynthia; Whitefoot, Patricia; Altamirano, Bianca N.; Womack, Michelle; Bastin, Marie; Dombrowski, Julia C.
2017-01-01
Background Rates of chlamydial infection in American Indian/Alaska Native women in the United States are approximately 4-fold those in non-Hispanic white women. We conducted a community-based survey of self-identified American Indian/Alaska Native women 14 to 25 years of age on a reservation in the Northwestern United States to inform a chlamydia screening strategy. Methods The anonymous survey assessed respondents’ knowledge, perceptions, and preferences related to chlamydia screening, results receipt, and partner notification. We recruited women using respondent-driven sampling, school-based sampling, and direct recruitment through social media and fliers. Participants in schools completed the survey as a paper-based, self-administered survey. Other participants could complete the survey in person, by phone as an interviewer-administered survey, or online. Results We recruited 162 participants, most in schools (n = 83; 51%) or by peer referral (n = 55; 34%). Only 1 woman completed the survey online. Thirty-one respondents (19%) reported a history of an unplanned first pregnancy, and 19 (12%) reported a history of a diagnosed sexually transmitted disease. Most women (n = 98; 63%) recognized the potential impact of Chlamydia trachomatis on fertility. The preferred site for chlamydia screening was the Indian Health Service Clinic (n = 114; 70%), but 79 women (41%) would accept a C. trachomatis test at a nonclinical testing site. Of the 56 women (35%) who would accept home testing, most preferred to get the test kit from a clinic. Conclusions Our results suggest that Indian Health Service efforts to increase chlamydia screening in the clinic and through outreach may be more successful than promotion of home testing in this population. PMID:27196261
Miyairi, Takeshi; Takamoto, Shinichi; Kotsuka, Yutaka; Takeuchi, Atsuko; Yamanaka, Katsuo; Sato, Hajime
2005-07-01
Retrograde cerebral perfusion (RCP) is used as an adjunctive method to hypothermic circulatory arrest to enhance cerebral protection in patients undergoing thoracic aortic surgery. It remains unclear whether RCP provides improved neurological and neuropsychological outcome. Forty-six patients undergoing thoracic aortic surgery using RCP, and 28 undergoing coronary artery bypass grafting (CABG; n = 28) with CPB, were enrolled in the study. Patients receiving RCP were subdivided into two groups, those with less than 60 min of RCP (S-RCP; n = 27) and with 60 min or more (L-RCP; n = 19). The patients' neurocognitive state was assessed by the revised Wechsler Adult Intelligence Scale a few days before operation, at 2-3 weeks and 4-6 months after operation. There were no stroke, seizure, and hospital mortality in either group. Significant decline between baseline and early scores were seen in three subtests (digit span, arithmetic, and picture completion) for S-RCP and four (digit span, arithmetic, picture completion, and picture arrangement) for L-RCP. Significant decline between baseline and late scores were seen in one subtest (arithmetic) for S-RCP, four (digit span, arithmetic, picture completion, and picture arrangement) for L-RCP, and one (object assembly) for CABG. The mean change of scores for one late test (digit symbol) was significantly lower in S-RCP than in CABG. The mean change of scores for three early tests (digit span, vocabulary, and picture arrangement) and four late tests (information, digit span, picture completion, and picture arrangement) were significantly lower in L-RCP than in CABG. Stepwise logistic regression analysis disclosed that, after considering the other variables, significant difference in test score changes were observed between CABG and L-RCP for two early tests (picture completion and digit symbol) as well as for three late tests (digit span, similarities, and picture completion). None of test score changes showed significant difference between CABG and S-RCP. The neurocognitive outcome in patients undergoing RCP less than 60 min were comparable with patients undergoing CABG without circulatory arrest. Prolonged RCP of 60 min or more in patients undergoing surgery of the thoracic aorta was associated with postoperative neurocognitive impairment.
Shoulder Arthroscopy Simulator Training Improves Shoulder Arthroscopy Performance in a Cadaver Model
Henn, R. Frank; Shah, Neel; Warner, Jon J.P.; Gomoll, Andreas H.
2013-01-01
Purpose The purpose of this study was to quantify the benefits of shoulder arthroscopy simulator training with a cadaver model of shoulder arthroscopy. Methods Seventeen first year medical students with no prior experience in shoulder arthroscopy were enrolled and completed this study. Each subject completed a baseline proctored arthroscopy on a cadaveric shoulder, which included controlling the camera and completing a standard series of tasks using the probe. The subjects were randomized, and nine of the subjects received training on a virtual reality simulator for shoulder arthroscopy. All subjects then repeated the same cadaveric arthroscopy. The arthroscopic videos were analyzed in a blinded fashion for time to task completion and subjective assessment of technical performance. The two groups were compared with students t-tests, and change over time within groups was analyzed with paired t-tests. Results There were no observed differences between the two groups on the baseline evaluation. The simulator group improved significantly from baseline with respect to time to completion and subjective performance (p<0.05). Time to completion was significantly faster in the simulator group compared to controls at final evaluation (p<0.05). No difference was observed between the groups on the subjective scores at final evaluation (p=0.98). Conclusions Shoulder arthroscopy simulator training resulted in significant benefits in clinical shoulder arthroscopy time to task completion in this cadaver model. This study provides important additional evidence of the benefit of simulators in orthopaedic surgical training. Clinical Relevance There may be a role for simulator training in shoulder arthroscopy education. PMID:23591380
Larson, Bruce A; Schnippel, Kathryn; Ndibongo, Buyiswa; Xulu, Thembisile; Brennan, Alana; Long, Lawrence; Fox, Matthew P; Rosen, Sydney
2012-10-01
A mobile HIV counseling and testing (HCT) program around Johannesburg piloted the integration of point-of-care (POC) CD4 testing, using the Pima analyzer, to improve linkages to HIV care. We report results from this pilot program for patients testing positive (n = 508) from May to October 2010. We analyzed 3 primary outcomes: assignment to testing group (offered POC CD4 or not), successful follow-up (by telephone), and completed the referral visit for HIV care within 8 weeks after HIV testing if successfully followed up. Proportions for each outcome were calculated, and relative risks were estimated using a modified Poisson approach. Three hundred eleven patients were offered the POC CD4 test, and 197 patients were not offered the test. No differences in patient characteristics were observed between the 2 groups. Approximately 62.7% of patients were successfully followed up 8 weeks after HIV testing, with no differences observed between testing groups. Among those followed up, 54.4% reported completing their referral visit. Patients offered the POC CD4 test were more likely to complete the referral visit for further HIV care (relative risk 1.25, 95% confidence interval: 1.00 to 1.57). In this mobile HCT setting, patients offered POC CD4 testing as part of the HCT services were more likely to visit a referral clinic after testing, suggesting that rapid CD4 testing technology may improve linkage to HIV care. Future research can evaluate options for adjusting HCT services if POC CD4 testing was included permanently and the cost-effectiveness of the POC CD4 testing compared with other approaches for improving linkage of care.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brown, Geoffrey Wayne; Leonard, Philip; Hartline, Ernest Leon
High Explosives Science and Technology (M-7) completed all required formulation and testing of Remediated Nitrate Salt (RNS) surrogates on April 27, 2016 as specified in PLAN-TA9-2443 Rev B, "Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure", released February 16, 2016. This report summarizes the results of the work and also includes additional documentation required in that test plan. All formulation and testing was carried out according to PLAN-TA9-2443 Rev B. The work was carried out in three rounds, with the full matrix of samples formulated and tested in each round. Results from the first round of formulation andmore » testing were documented in memorandum M7-J6-6042, " Results from First Round of Remediated Nitrate Salt Surrogate Formulation and Testing." Results from the second round of formulation and testing were documented in M7-16-6053 , "Results from the Second Round of Remediated Nitrate Salt Surrogate Formulation and Testing." Initial results from the third round were documented in M7-16-6057, "Initial Results from the Third Round of Remediated Nitrate Salt Formulation and Testing."« less
Tree Testing of Hierarchical Menu Structures for Health Applications
Le, Thai; Chaudhuri, Shomir; Chung, Jane; Thompson, Hilaire J; Demiris, George
2014-01-01
To address the need for greater evidence-based evaluation of Health Information Technology (HIT) systems we introduce a method of usability testing termed tree testing. In a tree test, participants are presented with an abstract hierarchical tree of the system taxonomy and asked to navigate through the tree in completing representative tasks. We apply tree testing to a commercially available health application, demonstrating a use case and providing a comparison with more traditional in-person usability testing methods. Online tree tests (N=54) and in-person usability tests (N=15) were conducted from August to September 2013. Tree testing provided a method to quantitatively evaluate the information structure of a system using various navigational metrics including completion time, task accuracy, and path length. The results of the analyses compared favorably to the results seen from the traditional usability test. Tree testing provides a flexible, evidence-based approach for researchers to evaluate the information structure of HITs. In addition, remote tree testing provides a quick, flexible, and high volume method of acquiring feedback in a structured format that allows for quantitative comparisons. With the diverse nature and often large quantities of health information available, addressing issues of terminology and concept classifications during the early development process of a health information system will improve navigation through the system and save future resources. Tree testing is a usability method that can be used to quickly and easily assess information hierarchy of health information systems. PMID:24582924
4. COMPLETE X15 VEHICLE TEST STAND, DETAIL OF THRUST MOUNTING ...
4. COMPLETE X-15 VEHICLE TEST STAND, DETAIL OF THRUST MOUNTING STRUCTURE AT ENGINE END OF PLANE. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA
NASA Technical Reports Server (NTRS)
Thomas, R. E.; Gaines, G. B.
1978-01-01
Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.
Long-Duration, Balloon-Borne Observations of Cosmic Microwave Background Anisotropy
NASA Technical Reports Server (NTRS)
1997-01-01
Funds from this grant were used to support the continuing development of BOOMERANG, a 1.3 m, balloon-borne, attitude-stabilized telescope designed to measure the anisotropy of the Cosmic Microwave Background (CMB) on angular scales of 12 min to 10 degrees. By the end of the funding period covered by this grant, the fabrication of most of the BOOMERANG sub-systems was completed, and integration and test of the payload at Caltech had begun. The project was continued under a new grant from NASA and continuing funding from the NSF. Payload integration and test was completed in April, 1997. A campaign to Palestine, Texas, resulted in two test flights during 1997. A flight on August 12, 1997 was terminated on ascent due to a leaky balloon. The payload was successfully recovered, refurbished, and flown again on August 29, 1997. The second flight was completely successful, and qualified the payload for an LDB flight from McMurdo Stn., Antarctica, in December 1998.
The potential and biological test on cloned cassava crop remains on local sheep
NASA Astrophysics Data System (ADS)
Ginting, R.; Umar, S.; Hanum, C.
2018-02-01
This research aims at knowing the potential of cloned cassava crop remains dry matter and the impact of the feeding of the cloned cassava crop remains based complete feed on the consumption, the body weight gain, and the feed conversion of the local male sheep with the average of initial body weight of 7.75±1.75 kg. The design applied in the first stage research was random sampling method with two frames of tile and the second stage research applied Completely Randomized Design (CRD) with three (3) treatments and four (4) replicates. These treatments consisted of P1 (100% grass); P2 (50% grass, 50% complete feed pellet); P3 (100% complete feed from the raw material of cloned cassava crop remaining). Statistical tests showed that the feeding of complete feed whose raw material was from cloned cassava crop remains gave a highly significant impact on decreasing feed consumption, increasing body weight, lowering feed conversion, and increasing crude protein digestibility. The conclusion is that the cloned cassava crop remains can be used as complete sheep feed to replace green grass and can give the best result.
Recovery Efficiency Test Project: Phase 1, Activity report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Overbey, W.K. Jr.; Wilkins, D.W.; Keltch, B.
1988-04-01
This report is the second volume of the Recovery Efficiency Test Phase I Report of Activities. Volume 1 covered selection, well planning, drilling, coring, logging and completion operations. This volume reports on well testing activities, reclamation activities on the drilling site and access roads, and the results of physical and mechanical properties tests on the oriented core material obtained from a horizontal section of the well. 3 refs., 21 figs., 10 tabs.
A novel approach to determine primary stability of acetabular press-fit cups.
Weißmann, Volker; Boss, Christian; Bader, Rainer; Hansmann, Harald
2018-04-01
Today hip cups are used in a large variety of design variants and in increasing numbers of units. Their development is steadily progressing. In addition to conventional manufacturing methods for hip cups, additive methods, in particular, play an increasingly important role as development progresses. The present paper describes a modified cup model developed based on a commercially available press-fit cup (Allofit 54/JJ). The press-fit cup was designed in two variants and manufactured using selective laser melting (SLM). Variant 1 (Ti) was modeled on the Allofit cup using an adapted process technology. Variant 2 (Ti-S) was provided with a porous load bearing structure on its surface. In addition to the typical (complete) geometry, both variants were also manufactured and tested in a reduced shape where only the press-fit area was formed. To assess the primary stability of the press-fit cups in the artificial bone cavity, pull-out and lever-out tests were carried out. Exact fit conditions and two-millimeter press-fit were investigated. The closed-cell PU foam used as an artificial bone cavity was mechanically characterized to exclude any influence on the results of the investigation. The pull-out forces of the Ti-variant (complete-526 N, reduced-468 N) and the Ti-S variant (complete-548 N, reduced-526 N) as well as the lever-out moments of the Ti-variant (complete-10 Nm, reduced-9.8 Nm) and the Ti-S variant (complete-9 Nm, reduced-7.9 N) show no significant differences in the results between complete and reduced cups. The results show that the use of reduced cups in a press-fit design is possible within the scope of development work. Copyright © 2018 Elsevier Ltd. All rights reserved.
Neurocognitive Effects of Radiotherapy
2014-10-01
patients have completed a 4-5 hour neurocognitive testing assessment at baseline by Dr. Carol Armstrong. In addition , all patients have completed a 1...hour standard MRI as well as additional testing including diffuse tensor imaging (DTI), perfusion and diffusion. The majority of patients have...completed baseline and at least two additional time-points in regards to both neurocognitive testing and MRI. Eight patients have completed
Merchant, Roland C; Gee, Erin M; Clark, Melissa A; Mayer, Kenneth H; Seage, George R; DeGruttola, Victor G
2007-01-01
Background Two trials were conducted to compare emergency department patient comprehension of rapid HIV pre-test information using different methods to deliver this information. Methods Patients were enrolled for these two trials at a US emergency department between February 2005 and January 2006. In Trial One, patients were randomized to a no pre-test information or an in-person discussion arm. In Trial Two, a separate group of patients were randomized to an in-person discussion arm or a Tablet PC-based video arm. The video, "Do you know about rapid HIV testing?", and the in-person discussion contained identical Centers for Disease Control and Prevention-suggested pre-test information components as well as information on rapid HIV testing with OraQuick®. Participants were compared by information arm on their comprehension of the pre-test information by their score on a 26-item questionnaire using the Wilcoxon rank-sum test. Results In Trial One, 38 patients completed the no-information arm and 31 completed the in-person discussion arm. Of these 69 patients, 63.8% had twelve years or fewer of formal education and 66.7% had previously been tested for HIV. The mean score on the questionnaire for the in-person discussion arm was higher than for the no information arm (18.7 vs. 13.3, p ≤ 0.0001). In Trial Two, 59 patients completed the in-person discussion and 55 completed the video arms. Of these 114 patients, 50.9% had twelve years or fewer of formal education and 68.4% had previously been tested for HIV. The mean score on the questionnaire for the video arm was similar to the in-person discussion arm (20.0 vs. 19.2; p ≤ 0.33). Conclusion The video "Do you know about rapid HIV testing?" appears to be an acceptable substitute for an in-person pre-test discussion on rapid HIV testing with OraQuick®. In terms of adequately informing ED patients about rapid HIV testing, either form of pre-test information is preferable than for patients to receive no pre-test information. PMID:17850670
DSS 13 frequency stability tests
NASA Technical Reports Server (NTRS)
Otoshi, T. Y.; Franco, M. M.
1987-01-01
In a previous article, the results of frequency stability tests at DSS 13 were presented in table form for tau = 1000 s for the test period May 1985 through March 1986. This article is a continuation of that initial report and presents specially selected Allan sigma (square root of variance) plots of each of the subsystem test previously reported. An additional result obtained from tests performed during July 1986 was included for completeness. The Allan sigma plots are useful in that frequency stability information is not only given for tau = 1000 s, but for tau values in the regions of 1, 100, 500, and 2000 s as well.
Testing of the anemometer circuit: Data report
NASA Technical Reports Server (NTRS)
Moen, Michael J.
1992-01-01
The following text discusses results from the electronic step testing and the beginning of velocity step testing in the shock tube. It should be kept in mind that frequency response is always measured as the time from the beginning of the event to the minimum (positive inflection) of the 'bucket' that immediately follows the response. This report is not a complete account of the results from square wave testing. Some data is still in the process of being analyzed and efforts are being made to fit the data to both Freymuth's third order theory and modelled responses from SPICE circuit simulation software.
Assessment of radiation awareness training in immersive virtual environments
NASA Astrophysics Data System (ADS)
Whisker, Vaughn E., III
The prospect of new nuclear power plant orders in the near future and the graying of the current workforce create a need to train new personnel faster and better. Immersive virtual reality (VR) may offer a solution to the training challenge. VR technology presented in a CAVE Automatic Virtual Environment (CAVE) provides a high-fidelity, one-to-one scale environment where areas of the power plant can be recreated and virtual radiation environments can be simulated, making it possible to safely expose workers to virtual radiation in the context of the actual work environment. The use of virtual reality for training is supported by many educational theories; constructivism and discovery learning, in particular. Educational theory describes the importance of matching the training to the task. Plant access training and radiation worker training, common forms of training in the nuclear industry, rely on computer-based training methods in most cases, which effectively transfer declarative knowledge, but are poor at transferring skills. If an activity were to be added, the training would provide personnel with the opportunity to develop skills and apply their knowledge so they could be more effective when working in the radiation environment. An experiment was developed to test immersive virtual reality's suitability for training radiation awareness. Using a mixed methodology of quantitative and qualitative measures, the subjects' performances before and after training were assessed. First, subjects completed a pre-test to measure their knowledge prior to completing any training. Next they completed unsupervised computer-based training, which consisted of a PowerPoint presentation and a PDF document. After completing a brief orientation activity in the virtual environment, one group of participants received supplemental radiation awareness training in a simulated radiation environment presented in the CAVE, while a second group, the control group, moved directly to the assessment phase of the experiment. The CAVE supplied an activity-based training environment where learners were able to use a virtual survey meter to explore the properties of radiation sources and the effects of time and distance on radiation exposure. Once the training stage had ended, the subjects completed an assessment activity where they were asked to complete four tasks in a simulated radiation environment in the CAVE, which was designed to provide a more authentic assessment than simply testing understanding using a quiz. After the practicum, the subjects completed a post-test. Survey information was also collected to assist the researcher with interpretation of the collected data. Response to the training was measured by completion time, radiation exposure received, successful completion of the four tasks in the practicum, and scores on the post-test. These results were combined to create a radiation awareness score. In addition, observational data was collected as the subjects completed the tasks. The radiation awareness scores of the control group and the group that received supplemental training in the virtual environment were compared. T-tests showed that the effect of the supplemental training was not significant; however, calculation of the effect size showed a small-to-medium effect of the training. The CAVE group received significantly less radiation exposure during the assessment activity, and they completed the activities on an average of one minute faster. These results indicate that the training was effective, primarily for instilling radiation sensitivity. Observational data collected during the assessment supports this conclusion. The training environment provided by the immersive virtual reality recreated a radiation environment where learners could apply knowledge they had been taught by computer-based training. Activity-based training has been shown to be a more effective way to transfer skills because of the similarity between the training environment and the application environment. Virtual reality enables the training environment to look and feel like the application environment. Because of this, radiation awareness training in an immersive virtual environment should be considered by the nuclear industry, which is supported by the results of this experiment.
Complete Blood Count (For Parents)
... Test: Basic Metabolic Panel (BMP) Blood Test: Hemoglobin Basic Blood Chemistry Tests Word! Complete Blood Count (CBC) Medical Tests and Procedures (Video Landing Page) Getting a Blood Test (Video) Medical Tests: What to Expect ... View more About Us Contact Us ...
ERIC Educational Resources Information Center
Schmitt, T. A.; Sass, D. A.; Sullivan, J. R.; Walker, C. M.
2010-01-01
Imposed time limits on computer adaptive tests (CATs) can result in examinees having difficulty completing all items, thus compromising the validity and reliability of ability estimates. In this study, the effects of speededness were explored in a simulated CAT environment by varying examinee response patterns to end-of-test items. Expectedly,…
Results of telerobotic hand controller study using force information and rate control
NASA Technical Reports Server (NTRS)
Willshire, Kelli F.; Harrison, F. W.; Hogge, Edward F.; Williams, Robert L.; Soloway, Donald
1992-01-01
To increase quantified information about the effectiveness and subjective workload of force information relayed through manipulator input control devices, a space related task was performed by eight subjects with kinesthetic force feedback and/or local force accommodation through three different input control devices (i.e., hand controllers) operating in rate control mode. Task completion time, manipulator work, and subjective responses were measured. Results indicated a difference among the hand controllers. For the Honeywell six degree-of-freedom hand controller, the overall task completion times were shortest, the amount of work exerted was the least, and was the most preferred by test subjects. Neither force accommodation with or without reflection resulted in shorter task completion times or reduced work although those conditions were better than no force information for some aspects. Comparisons of results from previous studies are discussed.
Furnham, Adrian; Monsen, Jeremy; Ahmetoglu, Gorkan
2009-12-01
Both ability (measured by power tests) and non-ability (measured by preference tests) individual difference measures predict academic school outcomes. These include fluid as well as crystalized intelligence, personality traits, and learning styles. This paper examines the incremental validity of five psychometric tests and the sex and age of pupils to predict their General Certificate in Secondary Education (GCSE) test results. The aim was to determine how much variance ability and non-ability tests can account for in predicting specific GCSE exam scores. The sample comprised 212 British schoolchildren. Of these, 123 were females. Their mean age was 15.8 years (SD 0.98 years). Pupils completed three self-report tests: the Neuroticism-Extroversion-Openness-Five-Factor Inventory (NEO-FFI) which measures the 'Big Five' personality traits, (Costa & McCrae, 1992); the Typical Intellectual Engagement Scale (Goff & Ackerman, 1992) and a measure of learning style, the Study Process Questionnaire (SPQ; Biggs, 1987). They also completed two ability tests: the Wonderlic Personnel Test (Wonderlic, 1992) a short measure of general intelligence and the General Knowledge Test (Irving, Cammock, & Lynn, 2001) a measure of crystallized intelligence. Six months later they took their (10th grade) GCSE exams comprising four 'core' compulsory exams as well as a number of specific elective subjects. Correlational analysis suggested that intelligence was the best predictors of school results. Preference test measures accounted for relatively little variance. Regressions indicated that over 50% of the variance in school exams for English (Literature and Language) and Maths and Science combined could be accounted for by these individual difference factors. Data from less than an hour's worth of testing pupils could predict school exam results 6 months later. These tests could, therefore, be used to reliably inform important decisions about how pupils are taught.
Coal Technology Program progress report, March 1976
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Shakedown tests of the bench-scale hydrocarbonization system were successfully completed. Wyodak coal was fed to the reactor at a rate of 9.9 lb/hr where it was hydrocarbonized at 1050/sup 0/F under 20-atm hydrogen pressure. Laboratory results including settling tests, bench-scale settling tests, and sample ageing tests were continued. Two of ten compounds tested with the laboratory-scale apparatus were effective in increasing settling rates of solids in Solvent Refined Coal unfiltered oil, but bench-scale tests failed to show any improvements in the settling rate over the untreated SRC-UFO. Analytical chemistry efforts involved the removal and concentration of organic components in by-productmore » waters from fossil fuel conversion processes. A sephadex gel is being used to achieve hydrophilic-lipophilic separations in organic mixtures as a step in the analysis of fossil fuel related materials. Engineering Evaluations of the Synthiol and Hydrocarbonization Processes continued with the Synthiol process flow diagrams, heat and material balances, and utilities requirements being completed. Inspection techniques were developed for wear- and process-resistant coatings. Orders were placed for the Incoloy 800 tubing and a smaller quantity of Inconel 600 tubing for the tube matrix in the coal-fueled MIUS fluidized bed. An engineering feasibility review of General Atomic's proposal to ERDA for a bench-scale test program on thermochemical water splitting for hydrogen production was completed. (auth)« less
Tarkan, Sureyya; Plaisant, Catherine; Shneiderman, Ben; Hettinger, A. Zachary
2011-01-01
Researchers have conducted numerous case studies reporting the details on how laboratory test results of patients were missed by the ordering medical providers. Given the importance of timely test results in an outpatient setting, there is limited discussion of electronic versions of test result management tools to help clinicians and medical staff with this complex process. This paper presents three ideas to reduce missed results with a system that facilitates tracking laboratory tests from order to completion as well as during follow-up: (1) define a workflow management model that clarifies responsible agents and associated time frame, (2) generate a user interface for tracking that could eventually be integrated into current electronic health record (EHR) systems, (3) help identify common problems in past orders through retrospective analyses. PMID:22195201
You, John J; Liu, Yudong; Kirby, John; Vora, Parag; Moayyedi, Paul
2015-07-09
No head-to-head randomized controlled trials have demonstrated the superiority of one colorectal screening modality over another in reducing colorectal cancer mortality. We conducted a pilot randomized controlled trial of fecal occult blood testing (FOBT), optical colonoscopy (OC), and virtual colonoscopy (VC), to inform the planning of a larger evaluative trial. Eligible patients (aged 50 to 70) were recruited from five primary care practices in Hamilton, ON, Canada, between March 23, 2010 and August 11, 2010, and randomized 1:1:1 in a parallel design using an automated, centralized telephone service to either FOBT, OC, or VC. To reflect conventional practice, patients received no additional reminders to complete their allocated screening test beyond those received in usual practice. The primary outcome was completion of the assigned screening procedure. Results of the index test and any follow-up investigations were ascertained at 6 months. Participants, caregivers, and outcome assessors were not blinded to group assignment. The trial was stopped early due to lack of ongoing funding. A total of 198 participants were enrolled, of whom 67 were allocated to FOBT, 66 to OC, and 65 to VC. The allocated screening procedure was completed by 43 (64%) subjects allocated to FOBT (95% confidence interval [CI], 52-75%), 53 (80%) subjects allocated to OC (95% CI, 69-88%), and 50 (77%) subjects allocated to VC (95% CI, 65-85%); because the trial stopped early, we had insufficient statistical power to detect clinically relevant differences in completion rates. During 6 months follow-up, colorectal adenomas were detected in 0 (0%) subjects allocated to FOBT, 12 (18%) subjects allocated to OC, and 2 (3%) subjects allocated to VC. One subject in the OC arm had histological evidence of high-grade dysplasia. No subjects were diagnosed with colorectal cancer. In this pilot randomized controlled trial of colorectal cancer screening in a primary care setting, 64-80% of subjects completed their allocated screening test. These findings may be of value to investigators planning clinical trials to evaluate the effectiveness of colorectal cancer screening. ClinicalTrials.gov NCT00865527. https://clinicaltrials.gov/ct2/show/NCT00865527.
Advanced direct coal liquefaction concepts
DOE Office of Scientific and Technical Information (OSTI.GOV)
Berger, D.J.; Parker, R.J.; Simpson, P.L.
During the first quarter of FY 1993, the Project proceeded close to the Project Plan. The analysis of the feed material has been completed as far as possible. Some unplanned distillation was needed to correct the boiling range of the Black Thunder solvent used during the autoclave tests. Additional distillation will be required if the same solvent is to be used for the bench unit tests. A decision on this is still outstanding. The solvent to be used with Illinois No. 6 coal has not yet been defined. As a result, the procurement of the feed and the feed analysismore » is somewhat behind schedule. Agglomeration tests with Black Thunder coal indicates that small agglomerates can be formed. However, the ash removal is quite low (about 10%), which is not surprising in view of the low ash content of the coal. The first series of autoclave tests with Black Thunder coal was completed as planned. Also, additional runs are in progress as repeats of previous runs or at different operating conditions based on the data obtained so far. The results are promising indicating that almost complete solubilization (close to 90%) of Black Thunder coal can be achieved in a CO/H[sub 2]O environment at our anticipated process conditions. The design of the bench unit has been completed. In contrast to the originally planned modifications, the bench unit is now designed based on a computerized control and data acquisition system. All major items of equipment have been received, and prefabrication of assemblies and control panels is proceeding on schedule. Despite a slight delay in the erection of the structural steel, it is anticipated that the bench unit will be operational at the beginning of April 1993.« less
Advanced direct coal liquefaction concepts. Quarterly report, October 1, 1992--December 31, 1992
DOE Office of Scientific and Technical Information (OSTI.GOV)
Berger, D.J.; Parker, R.J.; Simpson, P.L.
During the first quarter of FY 1993, the Project proceeded close to the Project Plan. The analysis of the feed material has been completed as far as possible. Some unplanned distillation was needed to correct the boiling range of the Black Thunder solvent used during the autoclave tests. Additional distillation will be required if the same solvent is to be used for the bench unit tests. A decision on this is still outstanding. The solvent to be used with Illinois No. 6 coal has not yet been defined. As a result, the procurement of the feed and the feed analysismore » is somewhat behind schedule. Agglomeration tests with Black Thunder coal indicates that small agglomerates can be formed. However, the ash removal is quite low (about 10%), which is not surprising in view of the low ash content of the coal. The first series of autoclave tests with Black Thunder coal was completed as planned. Also, additional runs are in progress as repeats of previous runs or at different operating conditions based on the data obtained so far. The results are promising indicating that almost complete solubilization (close to 90%) of Black Thunder coal can be achieved in a CO/H{sub 2}O environment at our anticipated process conditions. The design of the bench unit has been completed. In contrast to the originally planned modifications, the bench unit is now designed based on a computerized control and data acquisition system. All major items of equipment have been received, and prefabrication of assemblies and control panels is proceeding on schedule. Despite a slight delay in the erection of the structural steel, it is anticipated that the bench unit will be operational at the beginning of April 1993.« less
Room Temperature and Elevated Temperature Composite Sandwich Joint Testing
NASA Technical Reports Server (NTRS)
Walker, Sandra P.
1998-01-01
Testing of composite sandwich joint elements has been completed to verify the strength capacity of joints designed to carry specified running loads representative of a high speed civil transport wing. Static tension testing at both room and an elevated temperature of 350 F and fatigue testing at room temperature were conducted to determine strength capacity, fatigue life, and failure modes. Static tension test results yielded failure loads above the design loads for the room temperature tests, confirming the ability of the joint concepts tested to carry their design loads. However, strength reductions as large as 30% were observed at the elevated test temperature, where all failure loads were below the room temperature design loads for the specific joint designs tested. Fatigue testing resulted in lower than predicted fatigue lives.
Wave Energy Prize - 1/20th Testing - AquaHarmonics
Scharmen, Wesley
2016-09-02
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the AquaHarmonics team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Wave Energy Prize - 1/20th Testing - Waveswing America
Scharmen, Wesley
2016-08-19
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Waveswing America team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Wave Energy Prize - 1/20th Testing - M3 Wave
Wesley Scharmen
2016-08-12
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the M3 Wave team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Wave Energy Prize - 1/20th Testing - Sea Potential
Scharmen, Wesley
2016-09-23
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Sea Potential team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Wave Energy Prize - 1/20th Testing - Oscilla Power
Scharmen, Wesley
2016-09-16
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Oscilla Power team, including the 1/20th Test Plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the WEPrize winners.
Wave Energy Prize - 1/20th Testing - RTI Wave Power
Scharmen, Wesley
2016-09-30
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the RTI Wave Power team, including the 1/20th Test Plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Wave Energy Prize - 1/20th Testing - Harvest Wave Energy
Wesley Scharmen
2016-08-26
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the Harvest Wave Energy team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Track-train dynamic analysis and test program, truck static test
NASA Technical Reports Server (NTRS)
Nemes, A. G.
1974-01-01
A series of tests were conducted to define the characteristics of an ASF 11 Ride Truck Assembly including joint slop, friction and stiffness. Loading to the truck assembly included vertical load to simulate the car/pool loading combined with lateral or moment loading that resulted in desired truck deflections for the various phases of testing. All seven test conditions were successfully completed with load and deflection data being collected. No attempt is made to reduce the applicable data other than to provide computer plots.
Complete description of all self-similar models driven by Lévy stable noise
NASA Astrophysics Data System (ADS)
Weron, Aleksander; Burnecki, Krzysztof; Mercik, Szymon; Weron, Karina
2005-01-01
A canonical decomposition of H -self-similar Lévy symmetric α -stable processes is presented. The resulting components completely described by both deterministic kernels and the corresponding stochastic integral with respect to the Lévy symmetric α -stable motion are shown to be related to the dissipative and conservative parts of the dynamics. This result provides stochastic analysis tools for study the anomalous diffusion phenomena in the Langevin equation framework. For example, a simple computer test for testing the origins of self-similarity is implemented for four real empirical time series recorded from different physical systems: an ionic current flow through a single channel in a biological membrane, an energy of solar flares, a seismic electric signal recorded during seismic Earth activity, and foreign exchange rate daily returns.
Heavy-section steel irradiation program. Progress report, April 1996--September 1996
DOE Office of Scientific and Technical Information (OSTI.GOV)
Corwin, W.R.
1997-09-01
The Heavy-Section Steel Irradiation Program was established to quantitatively assess the effects of neutron irradiation on the material behavior of typical reactor pressure vessel (RPV) steels. During this period, fracture mechanics testing of specimens of the irradiated low upper shelf (LUS) weld were completed and analyses performed. Heat treatment of five RPV plate materials was initiated to examine phosphorus segregation effects on the fracture toughness of the heat affected zone of welds. Initial results show that all five materials exhibited very large prior austenite grain sizes as a consequence of the initial heat treatment. Irradiated and annealed specimens of LUSmore » weld material were tested and analyzed. Four sets of Charpy V-notch (CVN) specimens were aged at various temperatures and tested to examine the reason for overrecovery of upper shelf energy that has been observed. Molecular dynamics cascade simulations were extended to 40 keV and have provided information representative of most of the fast neutron spectrum. Investigations of the correlation between microstructural changes and hardness changes in irradiated model alloys was also completed. Preliminary planning for test specimen machining for the Japan Power Development Reactor was completed. A database of Charpy impact and fracture toughness data for RPV materials that have been tested in the unirradiated and irradiated conditions is being assembled and analyzed. Weld metal appears to have similar CVN and fracture toughness transition temperature shifts, whereas the fracture toughness shifts are greater than CVN shifts for base metals. Draft subcontractor reports on precracked cylindrical tensile specimens were completed, reviewed, and are being revised. Testing on precracked CVN specimens, both quasi-static and dynamic, was evaluated. Additionally, testing of compact specimens was initiated as an experimental comparison of constraint limitations. 16 figs., 2 tabs.« less
Hyper-X Flight Engine Ground Testing for X-43 Flight Risk Reduction
NASA Technical Reports Server (NTRS)
Huebner, Lawrence D.; Rock, Kenneth E.; Ruf, Edward G.; Witte, David W.; Andrews, Earl H., Jr.
2001-01-01
Airframe-integrated scramjet engine testing has been completed at Mach 7 flight conditions in the NASA Langley 8-Foot High Temperature Tunnel as part of the NASA Hyper-X program. This test provided engine performance and operability data, as well as design and database verification, for the Mach 7 flight tests of the Hyper-X research vehicle (X-43), which will provide the first-ever airframe-integrated scramjet data in flight. The Hyper-X Flight Engine, a duplicate Mach 7 X-43 scramjet engine, was mounted on an airframe structure that duplicated the entire three-dimensional propulsion flowpath from the vehicle leading edge to the vehicle trailing edge. This model was also tested to verify and validate the complete flight-like engine system. This paper describes the subsystems that were subjected to flight-like conditions and presents supporting data. The results from this test help to reduce risk for the Mach 7 flights of the X-43.
Single-task and dual-task tandem gait test performance after concussion.
Howell, David R; Osternig, Louis R; Chou, Li-Shan
2017-07-01
To compare single-task and dual-task tandem gait test performance between athletes after concussion with controls on observer-timed, spatio-temporal, and center-of-mass (COM) balance control measurements. Ten participants (19.0±5.5years) were prospectively identified and completed a tandem gait test protocol within 72h of concussion and again 1 week, 2 weeks, 1 month, and 2 months post-injury. Seven uninjured controls (20.0±4.5years) completed the same protocol in similar time increments. Tandem gait test trials were performed with (dual-task) and without (single-task) concurrently performing a cognitive test as whole-body motion analysis was performed. Outcome variables included test completion time, average tandem gait velocity, cadence, and whole-body COM frontal plane displacement. Concussion participants took significantly longer to complete the dual-task tandem gait test than controls throughout the first 2 weeks post-injury (mean time=16.4 [95% CI: 13.4-19.4] vs. 10.1 [95% CI: 6.4-13.7] seconds; p=0.03). Single-task tandem gait times were significantly lower 72h post-injury (p=0.04). Dual-task cadence was significantly lower for concussion participants than controls (89.5 [95% CI: 68.6-110.4] vs. 127.0 [95% CI: 97.4-156.6] steps/minute; p=0.04). Moderately-high to high correlations between tandem gait test time and whole-body COM medial-lateral displacement were detected at each time point during dual-task gait (r s =0.70-0.93; p=0.03-0.001). Adding a cognitive task during the tandem gait test resulted in longer detectable deficits post-concussion compared to the traditional single-task tandem gait test. As a clinical tool to assess dynamic motor function, tandem gait may assist with return to sport decisions after concussion. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.
Paul, Christine L; Bryant, Jamie; Roos, Ian A; Henskens, Frans A; Paul, David J
2014-01-01
Background With increasing attention given to the quality of chronic disease care, a measurement approach that empowers consumers to participate in improving quality of care and enables health services to systematically introduce patient-centered initiatives is needed. A Web-based survey with complex adaptive questioning and interactive survey items would allow consumers to easily identify and prioritize detailed service initiatives. Objective The aim was to develop and test a Web-based survey capable of identifying and prioritizing patient-centered initiatives in chronic disease outpatient services. Testing included (1) test-retest reliability, (2) patient-perceived acceptability of the survey content and delivery mode, and (3) average completion time, completion rates, and Flesch-Kincaid reading score. Methods In Phase I, the Web-based Consumer Preferences Survey was developed based on a structured literature review and iterative feedback from expert groups of service providers and consumers. The touchscreen survey contained 23 general initiatives, 110 specific initiatives available through adaptive questioning, and a relative prioritization exercise. In Phase II, a pilot study was conducted within 4 outpatient clinics to evaluate the reliability properties, patient-perceived acceptability, and feasibility of the survey. Eligible participants were approached to complete the survey while waiting for an appointment or receiving intravenous therapy. The age and gender of nonconsenters was estimated to ascertain consent bias. Participants with a subsequent appointment within 14 days were asked to complete the survey for a second time. Results A total of 741 of 1042 individuals consented to participate (71.11% consent), 529 of 741 completed all survey content (78.9% completion), and 39 of 68 completed the test-retest component. Substantial or moderate reliability (Cohen’s kappa>0.4) was reported for 16 of 20 general initiatives with observed percentage agreement ranging from 82.1%-100.0%. The majority of participants indicated the Web-based survey was easy to complete (97.9%, 531/543) and comprehensive (93.1%, 505/543). Participants also reported the interactive relative prioritization exercise was easy to complete (97.0%, 189/195) and helped them to decide which initiatives were of most importance (84.6%, 165/195). Average completion time was 8.54 minutes (SD 3.91) and the Flesch-Kincaid reading level was 6.8. Overall, 84.6% (447/529) of participants indicated a willingness to complete a similar survey again. Conclusions The Web-based Consumer Preferences Survey is sufficiently reliable and highly acceptable to patients. Based on completion times and reading level, this tool could be integrated in routine clinical practice and allows consumers to easily participate in quality evaluation. Results provide a comprehensive list of patient-prioritized initiatives for patients with major chronic conditions and delivers practice-ready evidence to guide improvements in patient-centered care. PMID:25532217
The magnetohydrodynamics coal-fired flow facility
NASA Astrophysics Data System (ADS)
1990-12-01
The purpose of this report is to provide the status of a multi-task research and development program in coal fired MHD/steam combined cycle power production (more detailed information on specific topics is presented in topical reports). Current emphasis is on developing technology for the Steam Bottoming Cycle Program. The approach being taken is to design test components that simulate the most important process variables, such as gas temperature, chemical composition, tube metal temperature, particulate loading, etc., to gain test data needed for scale-up to larger size components. This quarter, a 217 hour coal-fired long-duration test was completed as part of the Proof-of-Concept (POC) test program. The aggregate test time is now 1512 hours of a planned 2000 hours on Eastern coal. The report contains results of testing the newly installed automatic ash/seed handling system and the high pressure sootblower system. The conceptual design for the modifications to the coal processing system to permit operation with Western coal is presented. Results of analysis of superheater test module tube removed after 500 hours of coal-fired testing are summarized. The status of the environmental program is reported. Pollutant measurements from remote monitoring trailers that give the dispersion of stack emissions are presented. Results of advanced measurement systems operated by both UTSI and Mississippi State University during the POC test are summarized. Actions to prepare for the installation of a 20MW(sub t) prototype of the TRW slag rejection combustor first stage are discussed. Contract management and administrative actions completed during the quarter are included.
ERIC Educational Resources Information Center
Brosvic, Gary M.; Epstein, Michael L.; Cook, Michael J.; Dihoff, Roberta E.
2005-01-01
Participants completed 5 classroom examinations during which the timing of knowledge of results (no feedback: Scantron form; delayed feedback: end-of-test, 24 hour delay; immediate feedback: educator, response form) and iterative responding (1 response, up to 4 responses) were manipulated. At the end of the semester, each participant completed a…
Verification and Validation of the General Mission Analysis Tool (GMAT)
NASA Technical Reports Server (NTRS)
Hughes, Steven P.; Qureshi, Rizwan H.; Cooley, D. Steven; Parker, Joel J. K.; Grubb, Thomas G.
2014-01-01
This paper describes the processes and results of Verification and Validation (V&V) efforts for the General Mission Analysis Tool (GMAT). We describe the test program and environments, the tools used for independent test data, and comparison results. The V&V effort produced approximately 13,000 test scripts that are run as part of the nightly buildtest process. In addition, we created approximately 3000 automated GUI tests that are run every two weeks. Presenting all test results are beyond the scope of a single paper. Here we present high-level test results in most areas, and detailed test results for key areas. The final product of the V&V effort presented in this paper was GMAT version R2013a, the first Gold release of the software with completely updated documentation and greatly improved quality. Release R2013a was the staging release for flight qualification performed at Goddard Space Flight Center (GSFC) ultimately resulting in GMAT version R2013b.
Production Facility Prototype Blower 1000 Hour Test Results II
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wass, Alexander Joseph; Woloshun, Keith Albert; Dale, Gregory E.
Long duration tests of the Aerzen GM 12.4 roots style blower in a closed loop configuration provides valuable data and lessons learned for long-term operation at the Mo-99 production facility. The blower was operated in a closed loop configuration with the flow conditions anticipated in plant operation with a Mo-100 target inline. The additional thermal energy generated from beam heating of the Mo-100 disks were not included in these tests. Five 1000 hour tests have been completed since the first test was performed in January of 2016. All five 1000 hour tests have proven successful in exposing preventable issues relatedmore » to oil and helium leaks. All blower tests to this date have resulted in stable blower performance and consistency. A summary of the results for each test, including a review of the first and second tests, are included in this report.« less
Test Results for Entry Guidance Methods for Space Vehicles
NASA Technical Reports Server (NTRS)
Hanson, John M.; Jones, Robert E.
2004-01-01
There are a number of approaches to advanced guidance and control that have the potential for achieving the goals of significantly increasing reusable launch vehicle (or any space vehicle that enters an atmosphere) safety and reliability, and reducing the cost. This paper examines some approaches to entry guidance. An effort called Integration and Testing of Advanced Guidance and Control Technologies has recently completed a rigorous testing phase where these algorithms faced high-fidelity vehicle models and were required to perform a variety of representative tests. The algorithm developers spent substantial effort improving the algorithm performance in the testing. This paper lists the test cases used to demonstrate that the desired results are achieved, shows an automated test scoring method that greatly reduces the evaluation effort required, and displays results of the tests. Results show a significant improvement over previous guidance approaches. The two best-scoring algorithm approaches show roughly equivalent results and are ready to be applied to future vehicle concepts.
Test Results for Entry Guidance Methods for Reusable Launch Vehicles
NASA Technical Reports Server (NTRS)
Hanson, John M.; Jones, Robert E.
2003-01-01
There are a number of approaches to advanced guidance and control (AG&C) that have the potential for achieving the goals of significantly increasing reusable launch vehicle (RLV) safety and reliability, and reducing the cost. This paper examines some approaches to entry guidance. An effort called Integration and Testing of Advanced Guidance and Control Technologies (ITAGCT) has recently completed a rigorous testing phase where these algorithms faced high-fidelity vehicle models and were required to perform a variety of representative tests. The algorithm developers spent substantial effort improving the algorithm performance in the testing. This paper lists the test cases used to demonstrate that the desired results are achieved, shows an automated test scoring method that greatly reduces the evaluation effort required, and displays results of the tests. Results show a significant improvement over previous guidance approaches. The two best-scoring algorithm approaches show roughly equivalent results and are ready to be applied to future reusable vehicle concepts.
High-Temperature Cyclic Oxidation Data, Volume 1
NASA Technical Reports Server (NTRS)
Barrett, C. A.; Garlick, R. G.; Lowell, C. E.
1984-01-01
This first in a series of cyclic oxidation handbooks contains specific-weight-change-versus-time data and X-ray diffraction results derived from high-temperature cyclic tests on high-temperature, high-strength nickel-base gamma/gamma' and cobalt-base turbine alloys. Each page of data summarizes a complete test on a given alloy sample.
ERIC Educational Resources Information Center
Tien, Flora F.; Blackburn, Robert T.
1996-01-01
A study explored the relationship between the traditional system of college faculty rank and faculty research productivity from the perspectives of behavioral reinforcement theory and selection function. Six hypotheses were generated and tested, using data from a 1989 national faculty survey. Results failed to support completely either the…
NASA Technical Reports Server (NTRS)
Allen, E. C., Jr.; Eder, F. W.
1972-01-01
Test results of booster and orbiter models of various component buildup configurations are reported. Dataset Collation Sheets, which give a complete summary of the configurations, are presented along with a description of the test facility. Data reduction procedures are described.
American College Health Association Annual Pap Test and Sexually Transmitted Infection Survey: 2006
ERIC Educational Resources Information Center
Smith, P. Davis; Roberts, Craig M.
2009-01-01
Objective: The authors describe the cervical cytology and sexually transmitted infection (STI) testing patterns of US college health centers. Participants and Methods: A total of 128 self-selected US college health centers--representing more than 2 million college students--completed an online survey during February and March 2007. Results: Almost…
ERIC Educational Resources Information Center
Ambler, Bob; Elkins, Mike
A study sought to affirm the previously established relationship between irrational beliefs and communication apprehension. Four hundred and fifty-four subjects completed an Irrational Beliefs Test (IBT) and all 24 questions of the Personal Report of Communication Apprehension (PRCA-24) test. Results support the hypothesis that students high in…
Planning for the Vocational Implications of Head Trauma.
ERIC Educational Resources Information Center
Sauer, G. C., Jr.; And Others
A model using career interest test results and career specific information to formulate vocational recommendations was tested on four head trauma patients who had been involved in car or motorcycle accidents at least 2 years before. As part of a psychological evaluation, patients completed the Self Directed Search (SDS), the Adjective Checklist…
ERIC Educational Resources Information Center
Meir, Rudi; Newton, Robert; Curtis, Edgar; Fardell, Matthew; Butler, Benjamin
2001-01-01
Australian and English professional rugby players completed various physical fitness performance tests to determine differences when grouping players into three different rugby positional categories. Results found minimal differences in test scores on the basis of players' specific positions on a team, however, when players were grouped according…
Test results from large wing and fuselage panels
NASA Technical Reports Server (NTRS)
Madan, Ram C.; Voldman, Mike
1993-01-01
This paper presents the first results in an assessment of the strength, stiffness, and damage tolerance of stiffened wing and fuselage subcomponents. Under this NASA funded program, 10 large wing and fuselage panels, variously fabricated by automated tow placement and dry-stitched preform/resin transfer molding, are to be tested. The first test of an automated tow placement six-longeron fuselage panel under shear load was completed successfully. Using NASTRAN finite-element analysis the stiffness of the panel in the linear range prior to buckling was predicted within 3.5 percent. A nonlinear analysis predicted the buckling load within 10 percent and final failure load within 6 percent. The first test of a resin transfer molding six-stringer wing panel under compression was also completed. The panel failed unexpectedly in buckling because of inadequate supporting structure. The average strain was 0.43 percent with a line load of 20.3 kips per inch of width. This strain still exceeds the design allowable strains. Also, the stringers did not debond before failure, which is in contrast to the general behavior of unstitched panels.
The experimental clean combustor program: Description and status to November 1975
NASA Technical Reports Server (NTRS)
Niedzwiecki, R. W.
1975-01-01
The generation of technology was studied for the development of advanced commercial CTOL aircraft engines with lower exhaust emissions than current aircraft. The program is in three phases. Phase 1, already completed, consisted of screening tests of low pollution combustor concepts. Phase 2, currently in progress, consists of test rig refinement of the most promising combustor concepts. Phase 2 test results are reported. Phase 3, also currently in progress, consists of incorporating and evaluating the best combustors as part of a complete engine. Engine test plans and pollution sampling techniques are described in this report. Program pollution goals, specified at engine idle and take-off conditions, are idle emission index value of 20 and 4 for carbon monoxide (CO) and total unburned hydrocarbons (THC), respectively, and at take-off are an oxides of nitrogen (NOx) emission index level of 10 and a smoke number of 15. Pollution data were obtained at all engine operating conditions. Results are presented in terms of emission index and also in terms of the Environmental Protection Agency's 1979 Standards Parameter.
Standardization of Analysis Sets for Reporting Results from ADNI MRI Data
Wyman, Bradley T.; Harvey, Danielle J.; Crawford, Karen; Bernstein, Matt A.; Carmichael, Owen; Cole, Patricia E.; Crane, Paul; DeCarli, Charles; Fox, Nick C.; Gunter, Jeffrey L.; Hill, Derek; Killiany, Ronald J.; Pachai, Chahin; Schwarz, Adam J.; Schuff, Norbert; Senjem, Matthew L.; Suhy, Joyce; Thompson, Paul M.; Weiner, Michael; Jack, Clifford R.
2013-01-01
The ADNI 3D T1-weighted MRI acquisitions provide a rich dataset for developing and testing analysis techniques for extracting structural endpoints. To promote greater rigor in analysis and meaningful comparison of different algorithms, the ADNI MRI Core has created standardized analysis sets of data comprising scans that met minimum quality control requirements. We encourage researchers to test and report their techniques against these data. Standard analysis sets of volumetric scans from ADNI-1 have been created, comprising: screening visits, 1 year completers (subjects who all have screening, 6 and 12 month scans), two year annual completers (screening, 1, and 2 year scans), two year completers (screening, 6 months, 1 year, 18 months (MCI only) and 2 years) and complete visits (screening, 6 months, 1 year, 18 months (MCI only), 2, and 3 year (normal and MCI only) scans). As the ADNI-GO/ADNI-2 data becomes available, updated standard analysis sets will be posted regularly. PMID:23110865
Flight demonstration of laser diode initiated ordnance
NASA Technical Reports Server (NTRS)
Boucher, Craig J.; Schulze, Norman R.
1995-01-01
A program has been initiated by NASA Headquarters to validate laser initiated ordnance in flight applications. The primary program goal is to bring together a team of government and industry members to develop a laser initiated ordnance system having the test and analysis pedigree to be flown on launch vehicles. The culmination of this effort was a flight of the Pegasus launch vehicle which had two fin rockets initiated by this laser system. In addition, a laser initiated ordnance squib was fired into a pressure bomb during thrusting flight. The complete ordnance system comprising a laser diode firing unit, fiber optic cable assembly, laser initiated detonator, and laser initiated squib was designed and built by The Ensign Bickford Company. The hardware was tested to the requirements of the Pegasus launch vehicle and integrated into the vehicle by The Ensign Bickford Company and the Orbital Sciences Corporation. Discussions include initial program concept, contract implementation, team member responsibilities, analysis results, vehicle integration, safing architecture, ordnance interfaces, mission timeline and telemetry data. A complete system description, summary of the analyses, the qualification test results, and the results of flight are included.
Do East Asian and Euro-Canadian women differ in sexual psychophysiology research participation?
Woo, Jane S T; Brotto, Lori A; Yule, Morag A
2010-07-01
Evidence from studies of ethnic differences in sexual conservativeness and Papanicolaou (Pap) testing behaviors suggests that there may be culture-linked differences in rates of participation in physically invasive sexuality studies, resulting in volunteer bias. The effects of ethnicity and acculturation on participation in female psychophysiological sexual arousal research were investigated in a sample of Euro-Canadian (n = 50) and East Asian (n = 58) women. Participants completed a battery of questionnaires and were given either course credits or $10 for their participation. Participants were then informed about the opportunity to participate in a second phase of the study, which involved psychophysiological sexual arousal testing and which was completely optional. Contrary to expectations, the results showed that the East Asian women were more likely to participate in Phase 2 than the Euro-Canadian women. Among the East Asian women, greater heritage acculturation and lower mainstream acculturation predicted a lower likelihood of Phase 2 participation. The findings suggest the need to be wary of overgeneralizing female psychophysiological sexual arousal research results and may have implications for improving Pap testing behaviors in East Asian women.
Reducing inpatient heritable thrombophilia testing using a clinical decision-making tool.
Smith, Tyler W; Pi, David; Hudoba, Monika; Lee, Agnes Y Y
2014-04-01
To evaluate the impact of a clinical decision-making tool, designed to educate physicians regarding heritable thrombophilia (HT) testing, on the volume of testing in hospitalised patients in the tertiary care setting. We performed a retrospective cohort study over a 6-year period (2007-2012) at a single tertiary care centre intervention site and two regional control sites. In January 2010, the intervention site instituted a policy change whereby physicians ordering HT testing on inpatients needed to complete a pre-preprinted order (PPO) form that outlined the limitations of HT testing in the hospitalised setting. Failure to complete the PPO within 24 h resulted in test cancellation. Our main outcome measure was the volume of HT testing performed at the three study sites. Introduction of the PPO resulted in a 79.4% (95% CI 71.2% to 87.6%) reduction in factor V Leiden (FVL) testing at the intervention site. This decrease was significantly greater compared with those in the two control teaching hospitals over the same time periods (33.7% and 43.6%; both p<0.001). Reductions in FVL testing postintervention were observed among all ordering specialists. Similar postintervention reductions in testing volumes were observed for antithrombin (57.4%), protein C (61.9%) and protein S (62.2%) activity assays. In a large tertiary care hospital, the introduction of a clinical decision-making tool significantly reduced HT testing in inpatients across clinical specialties. The impact on patient outcome should be assessed in further studies.
The Development and Flight Testing of an Aerially Deployed Unmanned Aerial System
NASA Astrophysics Data System (ADS)
Smith, Andrew
An investigation into the feasibility of aerial deployed unmanned aerial vehicles was completed. The investigation included the development and flight testing of multiple unmanned aerial systems to investigate the different components of potential aerial deployment missions. The project consisted of two main objectives; the first objective dealt with the development of an airframe capable of surviving aerial deployment from a rocket and then self assembling from its stowed configuration into its flight configuration. The second objective focused on the development of an autopilot capable of performing basic guidance, navigation, and control following aerial deployment. To accomplish these two objectives multiple airframes were developed to verify their completion experimentally. The first portion of the project, investigating the feasibility of surviving an aerial deployment, was completed using a fixed wing glider that following a successful deployment had 52 seconds of controlled flight. Before developing the autopilot in the second phase of the project, the glider was significantly upgraded to fix faults discovered in the glider flight testing and to enhance the system capabilities. Unfortunately to conform to outdoor flight restrictions imposed by the university and the Federal Aviation Administration it was required to switch airframes before flight testing of the new fixed wing platform could begin. As a result, an autopilot was developed for a quadrotor and verified experimentally completely indoors to remain within the limits of governing policies.
Pereira, Gerson Fernando Mendes; Sabidó, Meritxell; Caruso, Alessandro; Benzaken, Adele Schwartz
2017-07-05
In Brazil, due to the rapid increase in programmes for the prevention of mother-to-child transmission (PMTCT), routine programme data are widely available. The objective of this study was to assess the utility of programmatic data to replace HIV surveillance based on the antenatal care (ANC) surveillance survey (SS). We analysed ANC SS data from 219 maternity service clinics. PMTCT variables were extracted from the ANC SS data collection form, which allowed us to capture and compare the ANC SS data and PMTCT HIV test results for each pregnant woman who completed the ANC SS. Both the PMTCT programme and the ANC SS tested for HIV using sequential ELISA and western blot for confirmation. We assessed the completeness (% missing) of the PMTC data included in the ANC SS. Of the 36,713 pregnant women who had ANC SS HIV tests performed, 30,588 also underwent PMTCT HIV testing. The HIV prevalence rate from routine PMTCT testing was 0.36%, compared to 0.38% from the ANC SS testing (relative difference -0.05%; absolute difference -0.02%). The relative difference in prevalence rates between pregnant women in northern Brazil and pregnant women central-west Brazil was -0.98 and 0.66, respectively. Of the 29,856 women who had HIV test results from both the PMTCT and ANC SS, the positive percent agreement of the PMTCT versus the surveillance test was 84.1% (95% confidence interval [CI]: 74.8-91.0), and the negative percent agreement was 99.9% (95% CI: 99.9-100.0). The PMTCT HIV testing uptake was 86.4%. The ANC SS HIV prevalence was 0.33% among PMTCT non-refusers and 0.59% among refusers, with a percent bias of -10.80% and a differential prevalence ratio of 0.56. Syphilis and HIV testing results were complete in 98% and 97.6% of PMTCT reports, respectively. The reported HIV status for the women at clinic entry was missing. Although there were consistent HIV prevalence estimates from the PMTCT data and the ANC SS, the overall positive percent agreement of 84.1% falls below the World Health Organization benchmark of 94.7%. Therefore, Brazil must continue to reinforce data collection practices and ensure the quality of recently introduced rapid HIV testing before replacing the PMTCT data with surveillance techniques. However, some regions with better results could be prioritized to pilot the use of PMTCT data for surveillance.
14 CFR 33.93 - Teardown inspection.
Code of Federal Regulations, 2010 CFR
2010-01-01
... completing the endurance testing of § 33.87 (b), (c), (d), (e), or (g) of this part, each engine must be...) After completing the endurance testing of § 33.87(f), each engine must be completely disassembled, and... endurance testing of §§ 33.87 (b), (c), (d), or (e) of this part, and followed by the testing of § 33.87(f...
14 CFR 33.93 - Teardown inspection.
Code of Federal Regulations, 2012 CFR
2012-01-01
... completing the endurance testing of § 33.87 (b), (c), (d), (e), or (g) of this part, each engine must be...) After completing the endurance testing of § 33.87(f), each engine must be completely disassembled, and... endurance testing of §§ 33.87 (b), (c), (d), or (e) of this part, and followed by the testing of § 33.87(f...
CONCEPTUAL DESIGN ASSESSMENT FOR THE COFIRING OF BIOREFINERY SUPPLIED LIGNIN PROJECT
DOE Office of Scientific and Technical Information (OSTI.GOV)
David J. Webster; Jeffrey T. Ranney; Jacqueline G. Broder
2002-07-01
The major aspects of this project are proceeding toward completion. Prior to this quarter, design criteria, tentative site selection, facility layout, and preliminary facility cost estimates were completed. Processing of biosolids and pilot facility hydrolysis production have been completed to produce lignin for cofire testing. EERC had received all the biomass and baseline coal fuels for use in testing. All the combustion and fuel handling tests at EERC have been completed. During fuel preparation EERC reported no difficulties in fuel blending and handling. Preliminary cofire test results indicate that the blending of lignin and biosolids with the Colbert coal blendmore » generally reduces NOx emissions, increases the reactivity of the coal, and increases the ash deposition rate on superheater surfaces. Deposits produced from the fuel blends, however, are more friable and hence easier to remove from tube surfaces relative to those produced from the baseline Colbert coal blend. A draft of the final cofire technical report entitled ''Effects of Cofiring Lignin and Biosolids with Coal on Fireside Performance and Combustion Products'' has been prepared and is currently being reviewed by project team members. A final report is expected by mid-third quarter 2002. The TVA-Colbert facility has neared completion of the task to evaluate co-location of the Masada facility on the operation of the power generation facility. The TVA-Colbert fossil plant is fully capable of providing a reliable steam supply. The environmental review, preferred steam supply connection points and steam pipeline routing, and assessment of steam export impacts have been completed without major issue. A cost estimate for the steam supply system was also completed. TVA is further evaluating the impacts of adding lignin to the coal fuel blend and how the steam cost is impacted by proximity of the Masada biomass facility. TVA has provided a draft final report that is under review by team members.« less
Health fair screening: the clinical utility of the comprehensive metabolic profile.
Alpert, Jeffrey P; Greiner, Allen; Hall, Sandra
2004-01-01
Health fairs are a common method used by providers and health care organizations to provide screening tests, including comprehensive metabolic profiles (CMPs), to asymptomatic individuals. No national organizations currently recommend the complete CMP as a screening test for asymptomatic individuals in primary care settings. This study evaluated the value of CMPs in a health fair setting by measuring the ability of a health fair CMP to predict new medical diagnoses among residents of a sparsely populated rural county. Volunteer participants submitted fasting blood samples at a health fair conducted by a county health center in a county with 2,531 total residents. CMP values were determined to be "normal" or "abnormal" based on laboratory reference ranges and clinical judgment of the health center physicians. Medical records were reviewed 4 months later to determine if participants with abnormal CMP values had been diagnosed with new medical conditions as a result of the screening tests. Analysis was conducted to evaluate CMP test characteristics and determine whether demographic factors or specific CMP values predicted new medical diagnoses in the participants. Out of 478 health fair participants, 73 individuals had at least one abnormal CMP value. The most frequently occurring abnormal value was an elevated glucose level, with Hispanic participants significantly more likely to have this abnormality than whites. After all evaluation was completed, only about 1% of tested subjects had a new diagnosis as a result of the screening CMP test; most abnormal CMP tests did not result in a new diagnosis. The positive predictive value for an abnormal test resulting in a new medical diagnosis was 0.356. Comprehensive metabolic profiles have limited value as a screening tool in asymptomatic populations at health fairs.
Vachin, F; Hans, S; Atlan, D; Brasnu, D; Menard, M; Laccourreye, O
2004-06-01
To evaluate the long-term results of exclusive chemotherapy for T1-T3N0M0 glottic squamous cell carcinoma complete clinical responders after induction chemotherapy. Between 1985 and 2000, 69 patients with glottic squamous cell carcinoma complete clinical responders after induction chemotherapy were managed with exclusive chemotherapy at our department. Chemotherapy associated platinum and fluorouracil. This retrospective analysis evaluated actuarial survival, treatment morbidity, oncologic events and laryngeal preservation. Various independent factors were tested for potential correlation with survival and local recurrence. The 5-year Kaplan-Meier actuarial survival, local control, lymph node control estimate were 83,6%, 64,8%, 98,6% respectively. Chemotherapy never resulted in death. The 10-year actuarial metachronous second primary tumors estimate was 32%. The overall laryngeal preservation rate was 98,6%. Altogether our data and the review of the literature suggest that in patients achieving a complete clinical response after and induction based chemotherapy regimen, the completion of an exclusive chemotherapy regimen appears to be a valid alternative to the conventional use of radiotherapy or chemo-radiation protocols.
Small Engine Technology (Set) Task 8 Aeroelastic Prediction Methods
NASA Technical Reports Server (NTRS)
Eick, Chris D.; Liu, Jong-Shang
1998-01-01
AlliedSignal Engines, in cooperation with NASA LeRC, completed an evaluation of recently developed aeroelastic computer codes using test cases from the AlliedSignal Engines fan blisk database. Test data for this task includes strain gage, light probe, performance, and steady-state pressure information obtained for conditions where synchronous or flutter vibratory conditions were found to occur. Aeroelastic codes evaluated include the quasi 3-D UNSFLO (developed at MIT and modified to include blade motion by AlliedSignal), the 2-D FREPS (developed by NASA LeRC), and the 3-D TURBO-AE (under development at NASA LeRC). Six test cases each where flutter and synchronous vibrations were found to occur were used for evaluation of UNSFLO and FREPS. In addition, one of the flutter cases was evaluated using TURBO-AE. The UNSFLO flutter evaluations were completed for 75 percent radial span and provided good agreement with the experimental test data. Synchronous evaluations were completed for UNSFLO but further enhancement needs to be added to the code before the unsteady pressures can be used to predict forced response vibratory stresses. The FREPS evaluations were hindered as the steady flow solver (SFLOW) was unable to converge to a solution for the transonic flow conditions in the fan blisk. This situation resulted in all FREPS test cases being attempted but no results were obtained during the present program. Currently, AlliedSignal is evaluating integrating FREPS with our existing steady flow solvers to bypass the SFLOW difficulties. ne TURBO-AE steady flow solution provided an excellent match with the AlliedSignal Engines calibrated DAWES 3-D viscous solver. Finally, the TURBO-AE unsteady analyses also matched experimental observations by predicting flutter for the single test case evaluated.
NASA Astrophysics Data System (ADS)
Burns, Dana
Over the last two decades, online education has become a popular concept in universities as well as K-12 education. This generation of students has grown up using technology and has shown interest in incorporating technology into their learning. The idea of using technology in the classroom to enhance student learning and create higher achievement has become necessary for administrators, teachers, and policymakers. Although online education is a popular topic, there has been minimal research on the effectiveness of online and blended learning strategies compared to the student learning in a traditional K-12 classroom setting. The purpose of this study was to investigate differences in standardized test scores from the Biology End of Course exam when at-risk students completed the course using three different educational models: online format, blended learning, and traditional face-to-face learning. Data was collected from over 1,000 students over a five year time period. Correlation analyzed data from standardized tests scores of eighth grade students was used to define students as "at-risk" for failing high school courses. The results indicated a high correlation between eighth grade standardized test scores and Biology End of Course exam scores. These students were deemed "at-risk" for failing high school courses. Standardized test scores were measured for the at-risk students when those students completed Biology in the different models of learning. Results indicated significant differences existed among the learning models. Students had the highest test scores when completing Biology in the traditional face-to-face model. Further evaluation of subgroup populations indicated statistical differences in learning models for African-American populations, female students, and for male students.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Truex, Michael J.; Strickland, Christopher E.; Oostrom, Martinus
A field test of desiccation is being conducted as an element of the Deep Vadose Zone Treatability Test Program. The active desiccation portion of the test has been completed. Monitoring data have been collected at the field test site during the post-desiccation period and are reported herein. This is an interim data summary report that includes about 4 years of post-desiccation monitoring data. The DOE field test plan proscribes a total of 5 years of post-desiccation monitoring.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Denslow, Kayte M.; Bontha, Jagannadha R.; Adkins, Harold E.
This document presents the visual and ultrasonic PulseEcho critical velocity test results obtained from the System Performance test campaign that was completed in September 2012 with the Remote Sampler Demonstration (RSD)/Waste Feed Flow Loop cold-test platform located at the Monarch test facility in Pasco, Washington. This report is intended to complement and accompany the report that will be developed by WRPS on the design of the System Performance simulant matrix, the analysis of the slurry test sample concentration and particle size distribution (PSD) data, and the design and construction of the RSD/Waste Feed Flow Loop cold-test platform.
Portnoy, David B
2010-07-01
Waiting for medical test results that signal physical harm can be a stressful and potentially psychologically harmful experience. Despite this, interventionists and physicians often use this wait time to deliver behavior change messages and other important information about the test, possible results and its implications. This study examined how "bracing" for a medical test result impacts cognitive processing, as well as recall of information delivered during this period. Healthy U.S. university students (N = 150) were tested for a deficiency of a fictitious saliva biomarker that was said to be predictive of long-term health problems using a 2 (Test Result) x 2 (Expected immediacy of result: 10 min, 1 month) factorial design. Participants expecting to get the test result shortly should have been bracing for the result. While waiting for the test results participants completed measures of cognitive processing. After participants received the test result, recall of information about the biomarker was tested in addition to cognitive measures. One week later, participants who were originally told they did not have the deficiency had their recall assessed again. Results showed that anticipating an imminent test result increased cognitive distraction in the processing of information and lowered recall of information about the test and the biomarker. These results suggest that delivering critical information to patients after administering a test and immediately before giving the results may not be optimal.
The influence of land-atmosphere interactions on variability of the North American Monsoon
NASA Technical Reports Server (NTRS)
Small, Eric; Lakshmi, Venkat
2005-01-01
Our project focused on the influence of land-atmosphere interactions on variability of North American Monsoon System (NAMS) precipitation is summarized in seven published manuscripts (listed below). Three of these manuscripts (Matsui et al. 2003; Matsui et al. 2005; Small and Kurc 2003) were completed solely with support from this NASA project. The remaining four were completed with additional support from NOAA. Our primary results are summarized: 1) Test of Rocky Mountains snowcover-NAMS rainfall hypothesis. Testing radiation and convective precipitation parameterization in MM5. Analysis of soil moisture-radiation feedbacks in semiarid environments from field observations and modeling.
The long-term impacts of group treatment for partner abuse.
Mcgregor, Marla; Tutty, Leslie M; Babins-Wagner, Robbie; Gill, Marlyn
2002-01-01
This paper evaluates Responsible Choices for Men, a 14-week therapy group for abusive men based on feminist perspectives using narrative methods. Pre-test and post-test information was available for 76 program completers measuring physical and non-physical abuse, self-esteem, perceived stress, family relations, depression, assertiveness, and sex-role beliefs. The men significantly improved on all variables. A further focus was following up with 22 group members, contacted 5 to 28 months post treatment and asked to complete the same measures. The results indicated not only maintenance of the post-group changes, but continued improvement. Clinical implications and recommendations for group programming with abusive men are presented.
Cardaropoli, Daniele; Tamagnone, Lorenzo; Roffredo, Alessandro; Gaveglio, Lorena
2014-01-01
Multiple adjacent recession defects were treated in 32 patients using a coronally advanced flap (CAF) with or without a collagen matrix (CM). The percentage of root coverage was 81.49% ± 23.45% (58% complete root coverage) for CAF sites (control) and 93.25% ± 10.01% root coverage (72% complete root coverage) for CM plus CAF sites (test). The results achieved in the test group were significantly greater than in the control group, indicating that CM plus CAF is a suitable option for the treatment of multiple adjacent gingival recessions.
Prediction of Lunar- and Martian-Based Intra- and Site-to-Site Task Performance.
Ade, Carl J; Broxterman, Ryan M; Craig, Jesse C; Schlup, Susanna J; Wilcox, Samuel L; Warren, Steve; Kuehl, Phillip; Gude, Dana; Jia, Chen; Barstow, Thomas J
2016-04-01
This study aimed to investigate the feasibility of determining the physiological parameters associated with the ability to complete simulated exploration type tasks at metabolic rates which might be expected for lunar and Martian ambulation. Running V̇O2max and gas exchange threshold (GET) were measured in 21 volunteers. Two simulated extravehicular activity field tests were completed in 1 G in regular athletic apparel at two intensities designed to elicit metabolic rates of ∼20.0 and ∼30.0 ml · kg(-1) · min(-1), which are similar to those previously reported for ambulation in simulated lunar- and Martian-based environments, respectively. All subjects were able to complete the field test at the lunar intensity, but 28% were unable to complete the field test at the Martian intensity (non-Finishers). During the Martian field test there were no differences in V̇O2 between Finishers and non-Finishers, but the non-Finishers achieved a greater %V̇O2max compared to Finishers (78.4 ± 4.6% vs. 64.9 ± 9.6%). Logistic regression analysis revealed fitness thresholds for a predicted probability of 0.5, at which Finishing and non-Finishing are equally likely, and 0.75, at which an individual has a 75% chance of Finishing, to be a V̇O2max of 38.4 ml · kg(-1) · min(-1) and 40.0 ml · kg(-1) · min(-1) or a GET of 20.1 ml · kg(-1) · min(-1) and 25.1 ml · kg(-1) · min(-1), respectively (χ(2) = 10.2). Logistic regression analysis also revealed that the expected %V̇O2max required to complete a field test could be used to successfully predict performance (χ(2) = 19.3). The results of the present investigation highlight the potential utility of V̇O2max, particularly as it relates to the metabolic demands of a surface ambulation, in defining successful completion of planetary-based exploration field tests.
High pressure compressor component performance report
NASA Technical Reports Server (NTRS)
Cline, S. J.; Fesler, W.; Liu, H. S.; Lovell, R. C.; Shaffer, S. J.
1983-01-01
A compressor optimization study defined a 10 stage configuration with a 22.6:1 pressure ratio, an adiabatic efficiency goal of 86.1%, and a polytropic efficiency of 90.6%; the corrected airflow is 53.5 kg/s. Subsequent component testing included three full scale tests: a six stage rig test, a 10 stage rig test, and another 10 stage rig test completed in the second quarter of 1982. Information from these tests is used to select the configuration for a core engine test and an integrated core/low spool test. The test results will also provide data base for the flight propulsion system. The results of the test series with both aerodynamic and mechanical performance of each compressor build are presented. The second 10 stage compressor adiabatic efficiency was 0.848 at a cruise operating point versus a test goal of 0.846.
30 CFR 250.467 - How long must I keep records?
Code of Federal Regulations, 2012 CFR
2012-07-01
... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... . . . (a) Drilling, Ninety days after you complete drilling operations. (b) Casing and liner pressure tests, diverter tests, and BOP tests, Two years after the completion of drilling operations. (c) Completion of a...
30 CFR 250.467 - How long must I keep records?
Code of Federal Regulations, 2014 CFR
2014-07-01
... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... . . . (a) Drilling, Ninety days after you complete drilling operations. (b) Casing and liner pressure tests, diverter tests, and BOP tests, Two years after the completion of drilling operations. (c) Completion of a...
30 CFR 250.467 - How long must I keep records?
Code of Federal Regulations, 2013 CFR
2013-07-01
... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... . . . (a) Drilling, Ninety days after you complete drilling operations. (b) Casing and liner pressure tests, diverter tests, and BOP tests, Two years after the completion of drilling operations. (c) Completion of a...
Armstrong, Bonnie; Spaniol, Julia; Persaud, Nav
2018-02-13
Clinicians often overestimate the probability of a disease given a positive test result (positive predictive value; PPV) and the probability of no disease given a negative test result (negative predictive value; NPV). The purpose of this study was to investigate whether experiencing simulated patient cases (ie, an 'experience format') would promote more accurate PPV and NPV estimates compared with a numerical format. Participants were presented with information about three diagnostic tests for the same fictitious disease and were asked to estimate the PPV and NPV of each test. Tests varied with respect to sensitivity and specificity. Information about each test was presented once in the numerical format and once in the experience format. The study used a 2 (format: numerical vs experience) × 3 (diagnostic test: gold standard vs low sensitivity vs low specificity) within-subjects design. The study was completed online, via Qualtrics (Provo, Utah, USA). 50 physicians (12 clinicians and 38 residents) from the Department of Family and Community Medicine at St Michael's Hospital in Toronto, Canada, completed the study. All participants had completed at least 1 year of residency. Estimation accuracy was quantified by the mean absolute error (MAE; absolute difference between estimate and true predictive value). PPV estimation errors were larger in the numerical format (MAE=32.6%, 95% CI 26.8% to 38.4%) compared with the experience format (MAE=15.9%, 95% CI 11.8% to 20.0%, d =0.697, P<0.001). Likewise, NPV estimation errors were larger in the numerical format (MAE=24.4%, 95% CI 14.5% to 34.3%) than in the experience format (MAE=11.0%, 95% CI 6.5% to 15.5%, d =0.303, P=0.015). Exposure to simulated patient cases promotes accurate estimation of predictive values in clinicians. This finding carries implications for diagnostic training and practice. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
An Examination of the Perceived Importance of Technical Competence in Acquisition Project Management
1991-09-01
Develop (First Draft) Instructions Critique (Revision) Answerability Pilot Test (Second Draft) Analysis Response Mode Revision Useability Preparation...appropriate questionnaire items. Initially, the set of questions developed for the study reflected a few shortcomings. A pilot test of the first draft among...resulted. First, feedback from the pilot test indicated a need to reduce the completion time. Because the multiple choice format required several
Gumieniak, Robert J; Gledhill, Norman; Jamnik, Veronica K
2018-05-04
To assess the impact of repeat performances (familiarisation) plus exercise training on completion time for the Ontario Wildland Firefighter (WFF) Fitness Test circuit (WFX-FIT), normally active general population participants (n = 145) were familiarised to the protocol then randomised into (i) exercise training, (ii) circuit only weekly performances or (iii) controls. At Baseline, the WFX-FIT pass rate for all groups combined was 11% for females and 73% for males, indicating that the Ontario WFX-FIT standard had a possible adverse impact on females. Following test familiarisation, mean circuit completion times improved by 11.9% and 10.2% for females and males, respectively. There were significant improvements in completion time for females (19.8%) and males (16.9%) who trained, plus females (12.2%) and males (9.8%) who performed the circuit only, while control participants were unchanged. Post training, the pass rate of the training group was 80% for females and 100% for males. Practitioner Summary: This paper details the impact of familiarisation plus exercise training as accommodation to mitigate potential adverse impact on initial attack wildland firefighter test performance. The results underscore the importance of test familiarisation opportunities and physical fitness training programmes that are specific to the demands of the job.
NASA Technical Reports Server (NTRS)
Bull, John; Mah, Robert; Davis, Gloria; Conley, Joe; Hardy, Gordon; Gibson, Jim; Blake, Matthew; Bryant, Don; Williams, Diane
1995-01-01
Failures of aircraft primary flight-control systems to aircraft during flight have led to catastrophic accidents with subsequent loss of lives (e.g. , DC-1O crash, B-747 crash, C-5 crash, B-52 crash, and others). Dryden Flight Research Center (DFRC) investigated the use of engine thrust for emergency flight control of several airplanes, including the B-720, Lear 24, F-15, C-402, and B-747. A series of three piloted simulation tests have been conducted at Ames Research Center to investigate propulsion control for safely landing a medium size jet transport which has experienced a total primary flight-control failure. The first series of tests was completed in July 1992 and defined the best interface for the pilot commands to drive the engines. The second series of tests was completed in August 1994 and investigated propulsion controlled aircraft (PCA) display requirements and various command modes. The third series of tests was completed in May 1995 and investigated PCA full-flight envelope capabilities. This report describes the concept of a PCA, discusses pilot controls, displays, and procedures; and presents the results of piloted simulation evaluations of the concept by a cross-section of air transport pilots.
NASA Technical Reports Server (NTRS)
Knight, Montgomery; Harris, Thomas A
1931-01-01
This experimental investigation was conducted primarily for the purpose of obtaining a method of correcting to free air conditions the results of airfoil force tests in four open wind tunnel jets of different shapes. Tests were also made to determine whether the jet boundaries had any appreciable effect on the pitching moments of a complete airplane model. Satisfactory corrections for the effect of the boundaries of the various jets were obtained for all the airfoils tested, the span of the largest being 0.75 of the jet width. The corrections for angle of attack were, in general, larger than those for drag. The boundaries had no appreciable effect on the pitching moments of either the airfoils or the complete airplane model. Increasing turbulence appeared to increase the minimum drag and maximum lift and to decrease the pitching moment.
NASA Astrophysics Data System (ADS)
Babcock, Earl; Salhi, Zahir; Gainov, Ramil; Woracek, Robin; Soltner, Helmut; Pistel, Patrick; Beule, Fabian; Bussmann, Klaus; Heynen, Achim; Kämmerling, Hans; Suxdorf, Frank; Strobl, Marcus; Russina, Margarita; Voigt, Jörg; Ioffe, Alexander
2018-05-01
An XYZ polarization analysis solution has been developed for the new thermal time-of-flight spectrometer TOPAS [1], to be operated in the coming east neutron guide hall at the MLZ. This prototype is currently being prepared to use on NEAT at HZB [2]. Polarization Analysis Studies on a Thermal Inelastic Spectrometer, commonly called PASTIS [3], is based on polarized 3He neutron spin filters and an XYZ field configuration for the sample environment and a polarization-preserving neutron guide field. The complete system was designed to provide adiabatic transport of the neutron polarization to the sample position on TOPAS while maintaining the homogeneity of the XYZ field. This complete system has now been tested on the polarized time-of-flight ESS test beam line V20 at HZB [4]. We present results of this test and the next steps forward.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Woods, Brian; Gutowska, Izabela; Chiger, Howard
Computer simulations of nuclear reactor thermal-hydraulic phenomena are often used in the design and licensing of nuclear reactor systems. In order to assess the accuracy of these computer simulations, computer codes and methods are often validated against experimental data. This experimental data must be of sufficiently high quality in order to conduct a robust validation exercise. In addition, this experimental data is generally collected at experimental facilities that are of a smaller scale than the reactor systems that are being simulated due to cost considerations. Therefore, smaller scale test facilities must be designed and constructed in such a fashion tomore » ensure that the prototypical behavior of a particular nuclear reactor system is preserved. The work completed through this project has resulted in scaling analyses and conceptual design development for a test facility capable of collecting code validation data for the following high temperature gas reactor systems and events— 1. Passive natural circulation core cooling system, 2. pebble bed gas reactor concept, 3. General Atomics Energy Multiplier Module reactor, and 4. prismatic block design steam-water ingress event. In the event that code validation data for these systems or events is needed in the future, significant progress in the design of an appropriate integral-type test facility has already been completed as a result of this project. Where applicable, the next step would be to begin the detailed design development and material procurement. As part of this project applicable scaling analyses were completed and test facility design requirements developed. Conceptual designs were developed for the implementation of these design requirements at the Oregon State University (OSU) High Temperature Test Facility (HTTF). The original HTTF is based on a ¼-scale model of a high temperature gas reactor concept with the capability for both forced and natural circulation flow through a prismatic core with an electrical heat source. The peak core region temperature capability is 1400°C. As part of this project, an inventory of test facilities that could be used for these experimental programs was completed. Several of these facilities showed some promise, however, upon further investigation it became clear that only the OSU HTTF had the power and/or peak temperature limits that would allow for the experimental programs envisioned herein. Thus the conceptual design and feasibility study development focused on examining the feasibility of configuring the current HTTF to collect validation data for these experimental programs. In addition to the scaling analyses and conceptual design development, a test plan was developed for the envisioned modified test facility. This test plan included a discussion on an appropriate shakedown test program as well as the specific matrix tests. Finally, a feasibility study was completed to determine the cost and schedule considerations that would be important to any test program developed to investigate these designs and events.« less
System Testing of Ground Cooling System Components
NASA Technical Reports Server (NTRS)
Ensey, Tyler Steven
2014-01-01
This internship focused primarily upon software unit testing of Ground Cooling System (GCS) components, one of the three types of tests (unit, integrated, and COTS/regression) utilized in software verification. Unit tests are used to test the software of necessary components before it is implemented into the hardware. A unit test determines that the control data, usage procedures, and operating procedures of a particular component are tested to determine if the program is fit for use. Three different files are used to make and complete an efficient unit test. These files include the following: Model Test file (.mdl), Simulink SystemTest (.test), and autotest (.m). The Model Test file includes the component that is being tested with the appropriate Discrete Physical Interface (DPI) for testing. The Simulink SystemTest is a program used to test all of the requirements of the component. The autotest tests that the component passes Model Advisor and System Testing, and puts the results into proper files. Once unit testing is completed on the GCS components they can then be implemented into the GCS Schematic and the software of the GCS model as a whole can be tested using integrated testing. Unit testing is a critical part of software verification; it allows for the testing of more basic components before a model of higher fidelity is tested, making the process of testing flow in an orderly manner.
Severin, Franziska; Schmidtke, Jörg; Mühlbacher, Axel; Rogowski, Wolf H
2013-11-01
Given the increasing number of genetic tests available, decisions have to be made on how to allocate limited health-care resources to them. Different criteria have been proposed to guide priority setting. However, their relative importance is unclear. Discrete-choice experiments (DCEs) and best-worst scaling experiments (BWSs) are methods used to identify and weight various criteria that influence orders of priority. This study tests whether these preference eliciting techniques can be used for prioritising genetic tests and compares the empirical findings resulting from these two approaches. Pilot DCE and BWS questionnaires were developed for the same criteria: prevalence, severity, clinical utility, alternatives to genetic testing available, infrastructure for testing and care established, and urgency of care. Interview-style experiments were carried out among different genetics professionals (mainly clinical geneticists, researchers and biologists). A total of 31 respondents completed the DCE and 26 completed the BWS experiment. Weights for the levels of the six attributes were estimated by conditional logit models. Although the results derived from the DCE and BWS experiments differed in detail, we found similar valuation patterns in the DCE and BWS experiments. The respondents attached greatest value to tests with high clinical utility (defined by the availability of treatments that reduce mortality and morbidity) and to testing for highly prevalent conditions. The findings from this study exemplify how decision makers can use quantitative preference eliciting methods to measure aggregated preferences in order to prioritise alternative clinical interventions. Further research is necessary to confirm the survey results.
2 kWe Solar Dynamic Ground Test Demonstration Project. Volume 3; Fabrication and Test Report
NASA Technical Reports Server (NTRS)
Alexander, Dennis
1997-01-01
The Solar Dynamic Ground Test Demonstration (SDGTD) project has successfully designed and fabricated a complete solar-powered closed Brayton electrical power generation system and tested it in a relevant thermal vacuum facility at NASA Lewis Research Center (LeRC). In addition to completing technical objectives, the project was completed 3-l/2 months early, and under budget.
7. COMPLETE X15 VEHICLE TEST STAND AFTER AN ENGINE FIRE ...
7. COMPLETE X-15 VEHICLE TEST STAND AFTER AN ENGINE FIRE OR EXPLOSION. Wreckage of engine is still fixed in its clamp; X-15 vehicle lies on the ground detached from engine. - Edwards Air Force Base, X-15 Engine Test Complex, Rocket Engine & Complete X-15 Vehicle Test Stands, Rogers Dry Lake, east of runway between North Base & South Base, Boron, Kern County, CA
Ceramic applications in turbine engines
NASA Technical Reports Server (NTRS)
Byrd, J. A.; Janovicz, M. A.; Thrasher, S. R.
1981-01-01
Development testing activities on the 1900 F-configuration ceramic parts were completed, 2070 F-configuration ceramic component rig and engine testing was initiated, and the conceptual design for the 2265 F-configuration engine was identified. Fabrication of the 2070 F-configuration ceramic parts continued, along with burner rig development testing of the 2070 F-configuration metal combustor in preparation for 1132 C (2070 F) qualification test conditions. Shakedown testing of the hot engine simulator (HES) rig was also completed in preparation for testing of a spin rig-qualified ceramic-bladed rotor assembly at 1132 C (2070 F) test conditions. Concurrently, ceramics from new sources and alternate materials continued to be evaluated, and fabrication of 2070 F-configuration ceramic component from these new sources continued. Cold spin testing of the critical 2070 F-configuration blade continued in the spin test rig to qualify a set of ceramic blades at 117% engine speed for the gasifier turbine rotor. Rig testing of the ceramic-bladed gasifier turbine rotor assembly at 108% engine speed was also performed, which resulted in the failure of one blade. The new three-piece hot seal with the nickel oxide/calcium fluoride wearface composition was qualified in the regenerator rig and introduced to engine operation wiwth marginal success.
NASA Technical Reports Server (NTRS)
Gregg, Dane W.; Hall, Susan E.
1996-01-01
Most emerging unmanned undersea vehicle (UUV) missions require significantly longer range and endurance than is achievable with existing battery technology. The Aluminum-Oxygen (Al-O2) semi-cell is a candidate technology capable of providing a significant improvement in endurance compared to the silver-zinc battery technology currently in use in UUVs and compares favorably to other proposed UUV power systems not only in performance, but also in safety and logistics. An Al-O2 semi-cell system is under development, consisting of a cell stack, gas management, oxygen storage, electrolyte management coolant and controller subsystems. It is designed to replace the existing silver-zinc battery and meet existing weight, volume, electrical and thermal requirements, therefore minimizing modification to the UUV. A detailed system design is complete. A component and material endurance test to evaluate compatibility and reliability of various materials and components is complete. Sub=scale (short stack) system testing is complete. A full-scale demonstration unit is now under construction for testing in the second half of 1995. The full scale demonstration test will simulate environmental conditions of the operational system. This paper summarizes the results of the extensive short stack and endurance test programs, describes the plan for full-scale testing, and concludes with a brief discussion of future directions for this technology.
Improving Diagnosis of Sepsis After Burn Injury Using a Portable Sepsis Alert System
2016-10-01
application listed milestones/target dates for important activities or phases of the project, identify these dates and show actual completion dates or the... activities ; 2) specific objectives; 3) significant results or key outcomes, including major findings, developments, or conclusions (both positive and...progresses to completion, the emphasis in reporting in this section should shift from reporting activities to reporting accomplishments. Task 1. Test the
Generalized likelihood ratios for quantitative diagnostic test scores.
Tandberg, D; Deely, J J; O'Malley, A J
1997-11-01
The reduction of quantitative diagnostic test scores to the dichotomous case is a wasteful and unnecessary simplification in the era of high-speed computing. Physicians could make better use of the information embedded in quantitative test results if modern generalized curve estimation techniques were applied to the likelihood functions of Bayes' theorem. Hand calculations could be completely avoided and computed graphical summaries provided instead. Graphs showing posttest probability of disease as a function of pretest probability with confidence intervals (POD plots) would enhance acceptance of these techniques if they were immediately available at the computer terminal when test results were retrieved. Such constructs would also provide immediate feedback to physicians when a valueless test had been ordered.
Booth, Rhonda; Happé, Francesca
2010-12-01
A local processing bias, referred to as "weak central coherence," has been postulated to underlie key aspects of autism spectrum disorder (ASD). Little research has examined whether individual differences in this cognitive style can be found in typical development, independent of intelligence, and how local processing relates to executive control. We present a brief and easy-to-administer test of coherence requiring global sentence completions. We report results from three studies assessing (a) 176 typically developing (TD) 8- to 25-year-olds, (b) individuals with ASD and matched controls, and (c) matched groups with ASD or attention deficit/hyperactivity disorder (ADHD). The results suggest that the Sentence Completion Task can reveal individual differences in cognitive style unrelated to IQ in typical development, that most (but not all) people with ASD show weak coherence on this task, and that performance is not related to inhibitory control. The Sentence Completion Task was found to be a useful test instrument, capable of tapping local processing bias in a range of populations. (c) 2010 Elsevier Inc. All rights reserved.
Orthostatic Intolerance After ISS and Space Shuttle Missions.
Lee, Stuart M C; Feiveson, Alan H; Stein, Sydney; Stenger, Michael B; Platts, Steven H
2015-12-01
Cardiovascular deconditioning apparently progresses with flight duration, resulting in a greater incidence of orthostatic intolerance following long-duration missions. Therefore, we anticipated that the proportion of astronauts who could not complete an orthostatic tilt test (OTT) would be higher on landing day and the number of days to recover greater after International Space Station (ISS) than after Space Shuttle missions. There were 20 ISS and 65 Shuttle astronauts who participated in 10-min 80° head-up tilt tests 10 d before launch, on landing day (R+0), and 3 d after landing (R+3). Fisher's Exact Test was used to compare the ability of ISS and Shuttle astronauts to complete the OTT. Cox regression was used to identify cardiovascular parameters associated with OTT completion and mixed model analysis was used to compare the change and recovery rates between groups. The proportion of astronauts who completed the OTT on R+0 (2 of 6) was less in ISS than in Shuttle astronauts (52 of 65). On R+3, 13 of 15 and 19 of 19 of the ISS and Shuttle astronauts, respectively, completed the OTT. An index comprised of stroke volume and diastolic blood pressure provided a good prediction of OTT completion and was altered by spaceflight similarly for both astronaut groups, but recovery was slower in ISS than in Shuttle astronauts. The proportion of ISS astronauts who could not complete the OTT on R+0 was greater and the recovery rate slower after ISS compared to Shuttle missions. Thus, mission planners and crew surgeons should anticipate the need to tailor scheduled activities and level of medical support to accommodate protracted recovery after long-duration microgravity exposures.
NASA Technical Reports Server (NTRS)
McFarland, Shane M.; Norcross, Jason
2016-01-01
Existing methods for evaluating EVA suit performance and mobility have historically concentrated on isolated joint range of motion and torque. However, these techniques do little to evaluate how well a suited crewmember can actually perform during an EVA. An alternative method of characterizing suited mobility through measurement of metabolic cost to the wearer has been evaluated at Johnson Space Center over the past several years. The most recent study involved six test subjects completing multiple trials of various functional tasks in each of three different space suits; the results indicated it was often possible to discern between different suit designs on the basis of metabolic cost alone. However, other variables may have an effect on real-world suited performance; namely, completion time of the task, the gravity field in which the task is completed, etc. While previous results have analyzed completion time, metabolic cost, and metabolic cost normalized to system mass individually, it is desirable to develop a single metric comprising these (and potentially other) performance metrics. This paper outlines the background upon which this single-score metric is determined to be feasible, and initial efforts to develop such a metric. Forward work includes variable coefficient determination and verification of the metric through repeated testing.
Oscillating-flow regenerator test rig
NASA Technical Reports Server (NTRS)
Wood, J. G.; Gedeon, D. R.
1994-01-01
This report summarizes work performed in setting up and performing tests on a regenerator test rig. An earlier status report presented test results, together with heat transfer correlations, for four regenerator samples (two woven screen samples and two felt metal samples). Lessons learned from this testing led to improvements to the experimental setup, mainly instrumentation as well as to the test procedure. Given funding and time constraints for this project it was decided to complete as much testing as possible while the rig was set up and operational, and to forego final data reduction and analysis until later. Additional testing was performed on several of the previously tested samples as well an on five newly fabricated samples. The following report is a summary of the work performed at OU, with many of the final test results included in raw data form.
Reliability of a science admission test (HAM-Nat) at Hamburg medical school.
Hissbach, Johanna; Klusmann, Dietrich; Hampe, Wolfgang
2011-01-01
The University Hospital in Hamburg (UKE) started to develop a test of knowledge in natural sciences for admission to medical school in 2005 (Hamburger Auswahlverfahren für Medizinische Studiengänge, Naturwissenschaftsteil, HAM-Nat). This study is a step towards establishing the HAM-Nat. We are investigating parallel forms reliability, the effect of a crash course in chemistry on test results, and correlations of HAM-Nat test results with a test of scientific reasoning (similar to a subtest of the "Test for Medical Studies", TMS). 316 first-year students participated in the study in 2007. They completed different versions of the HAM-Nat test which consisted of items that had already been used (HN2006) and new items (HN2007). Four weeks later half of the participants were tested on the HN2007 version of the HAM-Nat again, while the other half completed the test of scientific reasoning. Within this four week interval students were offered a five day chemistry course. Parallel forms reliability for four different test versions ranged from r(tt)=.53 to r(tt)=.67. The retest reliabilities of the HN2007 halves were r(tt)=.54 and r(tt )=.61. Correlations of the two HAM-Nat versions with the test of scientific reasoning were r=.34 und r=.21. The crash course in chemistry had no effect on HAM-Nat scores. The results suggest that further versions of the test of natural sciences will not easily conform to the standards of internal consistency, parallel-forms reliability and retest reliability. Much care has to be taken in order to assemble items which could be used interchangeably for the construction of new test versions. The test of scientific reasoning and the HAM-Nat are tapping different constructs. Participation in a chemistry course did not improve students' achievement, probably because the content of the course was not coordinated with the test and many students lacked of motivation to do well in the second test.
Naber, Jessica; Wyatt, Tami H
2014-01-01
The importance of critical thinking is well-documented by the American Association of Colleges of Nursing and the National League for Nursing. Reflective writing is often used to increase understanding and analytical ability. The lack of empirical evidence about the effect of reflective writing interventions on critical thinking supports the examination of this concept. Study objectives were: This study used an experimental, pretest-posttest design. The setting was two schools of nursing at universities in the southern United States. The convenience sample included 70 fourth-semester students in baccalaureate nursing programs. Randomly assigned control and experimental groups completed the California Critical Thinking Skills Test (CCTST) and the California Critical Thinking Dispositions Inventory Test (CCTDI). The experimental group completed six reflective writing assignments. Both groups completed the two tests again. Results showed that the experimental group had a significant increase (p=0.03) on the truthseeking subscale of the CCTDI when compared to the control group. The experimental group's scores increased on four CCTST subscales and were higher than the control group's on three CCTST subscales. The results of this study make it imperative for nursing schools to consider including reflective writing-especially assignments based on Paul's (1993) model-in nursing courses. If future studies, testing over longer periods of time, show significant increases in critical thinking, those interventions could be incorporated into nursing curriculum and change the way nurse educators evaluate students. Copyright © 2013 Elsevier Ltd. All rights reserved.
Yellapa, Vijayashree; Devadasan, Narayanan; Krumeich, Anja; Pant Pai, Nitika; Vadnais, Caroline; Pai, Madhukar; Engel, Nora
2017-01-01
ABSTRACT Background: Depending on a country’s diagnostic infrastructure, patients and providers play different roles in ensuring that correct and timely diagnosis is made. However, little is known about the work done by patients in accessing diagnostic services and completing the ‘test and treat’ loop. Objective: To address this knowledge gap, we traced the diagnostic journeys of patients with tuberculosis, diabetes, hypertension and typhoid, and examined the work they had to do to arrive at a diagnosis. Methods: This paper draws on a qualitative study, which included 78 semi-structured interviews and 13 focus group discussions with patients, public and private healthcare providers, community health workers, test manufacturers, laboratory technicians, program managers and policymakers. Data were collected between January and June 2013 in rural and urban Karnataka, South India, as part of a larger project on barriers to point-of-care testing. We reconstructed patient diagnostic processes retrospectively and analyzed emerging themes and patterns. Results: The journey to access diagnostic services requires a high level of involvement and immense work from patients and/or their caretakers. This process entails overcoming cost and distance, negotiating social relations, continuously making sense of their illness and diagnosis, producing and transporting samples, dealing with the social consequences of diagnosis, and returning results to the treating provider. The quality and content of interactions with providers were crucial for completion of test and treat loops. If the tasks became overwhelming, patients opted out, delayed being tested, switched providers and/or reverted to self-testing or self-treatment practices. Conclusion: Our study demonstrated how difficult it can be for patients to complete diagnostic journeys and how the health system works as far as diagnostics are concerned. If new point-of-care tests are to be implemented successfully, policymakers, program officers and test developers need to find ways to ease patient navigation through diagnostic services. PMID:28762894
NASA's Space Launch System Takes Shape
NASA Technical Reports Server (NTRS)
Askins, Bruce; Robinson, Kimberly F.
2017-01-01
Major hardware and software for NASA's Space Launch System (SLS) began rolling off assembly lines in 2016, setting the stage for critical testing in 2017 and the launch of a major new capability for deep space human exploration. SLS continues to pursue a 2018 first launch of Exploration Mission 1 (EM-1). At NASA's Michoud Assembly Facility near New Orleans, LA, Boeing completed welding of structural test and flight liquid hydrogen tanks, and engine sections. Test stands for core stage structural tests at NASA's Marshall Space Flight Center, Huntsville, AL. neared completion. The B2 test stand at NASA's Stennis Space Center, MS, completed major structural renovation to support core stage green run testing in 2018. Orbital ATK successfully test fired its second qualification solid rocket motor in the Utah desert and began casting the motor segments for EM-1. Aerojet Rocketdyne completed its series of test firings to adapt the heritage RS-25 engine to SLS performance requirements. Production is under way on the first five new engine controllers. NASA also signed a contract with Aerojet Rocketdyne for propulsion of the RL10 engines for the Exploration Upper Stage. United Launch Alliance delivered the structural test article for the Interim Cryogenic Propulsion Stage to MSFC for tests and construction was under way on the flight stage. Flight software testing at MSFC, including power quality and command and data handling, was completed. Substantial progress is planned for 2017. Liquid oxygen tank production will be completed at Michoud. Structural testing at Marshall will get under way. RS-25 hotfire testing will verify the new engine controllers. Core stage horizontal integration will begin. The core stage pathfinder mockup will arrive at the B2 test stand for fit checks and tests. EUS will complete preliminary design review. This paper will discuss the technical and programmatic successes and challenges of 2016 and look ahead to plans for 2017.
Pretest analysis document for Test S-FS-6
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shaw, R.A.; Hall, D.G.
This report documents the pretest analyses completed for Semiscale Test S-FS-6. This test will simulate a transient initiated by a 100% break in a steam generator bottom feedwater line downstream of the check valve. The initial conditions represent normal operating conditions for a C-E System 80 nuclear power plant. Predictions of transients resulting from feedwater line breaks in these plants have indicated that significant primary system overpressurization may occur. The enclosed analyses include a RELAP5/MOD2/CY21 code calculation and preliminary results from a facility hot, integrated test which was conducted to near S-FS-6 specifications. The results of these analyses indicate thatmore » the test objectives for Test S-FS-6 can be achieved. The primary system overpressurization will pose no threat to personnel or plant integrity.« less
The Economic Literacy of Louisiana College Students.
ERIC Educational Resources Information Center
Fishbaugh, Charles P.
The Test of Understanding in College Economics (TUCE) was delivered to a random sample of college students enrolled in 15 private and public institutions in Louisiana. The students took form A of the TUCE test before taking their first college course in economics and Form B of TUCE upon completing the course. Results showed that before taking a…
ERIC Educational Resources Information Center
Wiggins, Bradley E.
2013-01-01
This article presents the results from a post-test only experiment conducted in 2011 with undergraduate and graduate students (N = 67) from individualist and collectivist cultures. Demographic information was collected through questions appearing at the end of a post-test administered to subjects after completing the e-learning module. Each person…
ERIC Educational Resources Information Center
van Ginkel, Joost R.; van der Ark, L. Andries; Sijtsma, Klaas
2007-01-01
The performance of five simple multiple imputation methods for dealing with missing data were compared. In addition, random imputation and multivariate normal imputation were used as lower and upper benchmark, respectively. Test data were simulated and item scores were deleted such that they were either missing completely at random, missing at…
Aşkar, Petek; Altun, Arif; Cangöz, Banu; Cevik, Vildan; Kaya, Galip; Türksoy, Hasan
2012-04-01
The purpose of this study was to assess whether a computerized battery of neuropsychological tests could produce similar results as the conventional forms. Comparisons on 77 volunteer undergraduates were carried out with two neuropsychological tests: Line Orientation Test and Enhanced Cued Recall Test. Firstly, students were assigned randomly across the test medium (paper-and-pencil versus computerized). Secondly, the groups were given the same test in the other medium after a 30-day interval between tests. Results showed that the Enhanced Cued Recall Test-Computer-based did not correlate with the Enhanced Cued Recall Test-Paper-and-pencil results. Line Orientation Test-Computer-based scores, on the other hand, did correlate significantly with the Line Orientation Test-Paper-and-pencil version. In both tests, scores were higher on paper-and-pencil tests compared to computer-based tests. Total score difference between modalities was statistically significant for both Enhanced Cued Recall Tests and for the Line Orientation Test. In both computer-based tests, it took less time for participants to complete the tests.
Exploring the cause of initially reactive bovine brains on rapid tests for BSE
Dudas, Sandor; James, Jace; Anderson, Renee; Czub, Stefanie
2015-01-01
ABSTRACT Bovine spongiform encephalopathy (BSE) is an invariably fatal prion disease of cattle. The identification of the zoonotic potential of BSE prompted safety officials to initiate surveillance testing for this disease. In Canada, BSE surveillance is primarily focused on high risk cattle including animals which are dead, down and unable to rise, diseased or distressed. This targeted surveillance results in the submission of brain samples with a wide range of tissue autolysis and associated contaminants. These contaminants have the potential to interfere with important steps of surveillance tests resulting in initially positive test results requiring additional testing to confirm the disease status of the animal. The current tests used for BSE screening in Canada utilize the relative protease resistance of the prion protein gained when it misfolds from PrPC to PrPSc as part of the disease process. Proteinase K completely digests PrPC in normal brains, but leaves most of the PrPSc in BSE positive brains intact which is detected using anti-prion antibodies. These tests are highly reliable but occasionally give rise to initially reactive/false positive results. Test results for these reactive samples were close to the positive/negative cut-off on a sub set of test platforms. This is in contrast to all of the previous Canadian positive samples whose numeric values on these same test platforms were 10 to 100 fold greater than the test positive/negative cut-off. Here we explore the potential reason why a sample is repeatedly positive on a sub-set of rapid surveillance tests, but negative on other test platforms. In order to better understand and identify what might cause these initial reactions, we have conducted a variety of rapid and confirmatory assays as well as bacterial isolation and identification on BSE positive, negative and initially reactive samples. We observed high levels of viable bacterial contamination in initially reactive samples suggesting that the reactivity may be related to bacterial factors. Several bacteria isolated from the initially reactive samples have characteristics of biofilm forming bacteria and this extracellular matrix might play a role in preventing complete digestion of PrPC in these samples. PMID:26689488
Fire safety evaluation of aircraft lavatory and cargo compartments
NASA Technical Reports Server (NTRS)
Kourtides, D. A.; Parker, J. A.; Hilado, C. J.; Anderson, R. A.; Tustin, E.; Arnold, D. E.; Gaume, J. G.; Binding, A. T.; Mikeska, J. L.
1975-01-01
Large-scale aircraft lavatory and cargo compartment fire tests are described. Tests were conducted to evaluate the effectiveness of these compartments to contain fire and smoke. Two tests were conducted and are detailed. Test 1 involved a production Boeing 747 lavatory of the latest design installed in an enclosure outside the aircraft, to collect gases and expose animals to these gases. Results indicate that the interior of the lavatory was completely burned, evolving smoke and combustion products in the enclosure. Test 2 involved a simulated Douglas DC-10 cargo compartment retro-fitted with standard fiberglass liner. The fire caused excessive damage to the liner and burned through the ceiling in two areas. Test objectives, methods, materials, and results are presented and discussed.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-13
... program whereby the National Coordinator would authorize organizations to test and certify Complete EHRs... Certification Bodies (ONC-ATCBs)) to test and certify Complete EHRs and/or EHR Modules to the certification... Coordinator to test and certify Complete EHRs and/or EHR Modules, it will be subject, depending on the scope...
Effectiveness of the Size Matters Handwriting Program.
Pfeiffer, Beth; Rai, Gillian; Murray, Tammy; Brusilovskiy, Eugene
2015-04-01
The purpose of the research was to study changes in handwriting legibility among kindergarten, first- and second-grade students in response to the Size Matters curricular-based handwriting program. A two-group pre-post-test design was implemented at two public schools with half of the classrooms assigned to receive the Size Matters program and the other continuing to receive standard instruction. All participants completed two standardized handwriting measures at pre-test and after 40 instructional sessions were completed with the classes receiving the handwriting program. Results identified significant changes in legibility in the handwriting intervention group for all three grades when compared with the standard instruction group. The results of this study support the use of a curricular-embedded handwriting program and provide the foundation for future research examining the impact of handwriting legibility on learning outcomes.
Watt, S; Shores, E A; Kinoshita, S
1999-07-01
Implicit and explicit memory were examined in individuals with severe traumatic brain injury (TBI) under conditions of full and divided attention. Participants included 12 individuals with severe TBI and 12 matched controls. In Experiment 1, participants carried out an implicit test of word-stem completion and an explicit test of cued recall. Results demonstrated that TBI participants exhibited impaired explicit memory but preserved implicit memory. In Experiment 2, a significant reduction in the explicit memory performance of both TBI and control participants, as well as a significant decrease in the implicit memory performance of TBI participants, was achieved by reducing attentional resources at encoding. These results indicated that performance on an implicit task of word-stem completion may require the availability of additional attentional resources that are not preserved after severe TBI.
Complete transformation of ZnO and CuO nanoparticles in ...
Here, we present evidence on complete transformation of ZnO and CuO nanoparticles, which are among the most heavily studied metal oxide particles, during 24 h in vitro toxicological testing with human T-lymphocytes. Synchrotron radiation-based X-ray absorption near edge structure (XANES) spectroscopy results revealed that Zn speciation profiles of 30 nm and 80 nm ZnO nanoparticles, and ZnSO4- exposed cells were almost identical with the prevailing species being Zn-cysteine. This suggests that ZnO nanoparticles are rapidly transformed during a standard in vitro toxicological assay, and are sequestered intracellularly, analogously to soluble Zn. Complete transformation of ZnO in the test conditions was further supported by almost identical Zn spectra in medium to which ZnO nanoparticles or ZnSO4 was added. Likewise, Cu XANES spectra for CuO and CuSO4-exposed cells and cell culture media were similar. These results together with our observation on similar toxicological profiles of ZnO and soluble Zn, and CuO and soluble Cu, underline the importance of dissolution and subsequent transformation of ZnO and CuO nanoparticles during toxicological testing and provide evidence that the nano-specific effect of ZnO and CuO nanoparticulates is negligible in this system. We strongly suggest to account for this aspect when interpreting the toxicological results of ZnO and CuO nanoparticles. Although a number of studies have discussed the transformation of nanoparticles during
Salehi, Bahareh; Motamedi-Sedeh, Farahnaz; Madadgar, Omid; Khalili, Iraj; Ghalyan Chi Langroudi, Arash; Unger, Hermann; Wijewardana, Viskam
2018-06-01
Avian influenza (AI) A subtype H9N2 virus belongs to Orthomyxoviridae family and causes low-pathogenic disease AI. The use of gamma-irradiated viral antigens has been developed in the production of effective vaccines. In this research, LPAIV H9N2 strain, A/Chicken/IRN/Ghazvin/2001, was multiplied on SPF eggs and irradiated by a Nordian gamma cell instrument. Irradiated and non-irradiated AI virus (AIV) samples were titrated by EID50 method and hemagglutinin (HA) antigen was analyzed by HA test as the WHO pattern method. Infectivity of irradiated virus was determined by egg inoculation method during four blind cultures. The results showed that after increasing the dose of gamma radiation, virus titer gradually decreased. D 10 value and optimum dose for complete virus inactivation were calculated by dose/response curve, 3.36 and 29.52 kGy, respectively. In addition, HA antigenicity of gamma-irradiated virus samples from 0 to 30 kGy was not changed. The results of safety test for gamma-irradiated AIV samples showed complete inactivation with gamma ray doses 30 and 35 kGy, without any multiplication on eggs after four blind cultures. According to the results of HA antigen assay and safety test, the gamma-irradiated and complete inactivated AIV subtype H9N2 is a good candidate as an inactivated immunogenic agent for poultry vaccination.
NASA Technical Reports Server (NTRS)
Christy, D. E.
1972-01-01
A group of 29 cells with capacities ranging from 21.7 to 28.8 ampere-hours were tested. A summary of the results indicates: (1) All cells exceeded the rated capacity on all three capacity checks. (2) Five cells failed to recover to 1.150 volts. (3) During the overcharge tests, 15 of the 29 cells had to be removed from charge before completion of the respective tests due to high pressure.
NASA Technical Reports Server (NTRS)
Clark, T. B.
1985-01-01
The organic Rankine-cycle (ORC) power conversion assembly was tested. Qualification testing of the electrical transport subsystem was also completed. Test objectives were to verify compatibility of all system elements with emphasis on control of the power conversion assembly, to evaluate the performance and efficiency of the components, and to validate operating procedures. After 34 hours of power generation under a wide range of conditions, the net module efficiency exceeded 18% after accounting for all parasitic losses.
Helicopter/Ship Qualification Testing (Les essais de qualification helicoptere/navire)
2003-02-01
maximum all-up masses of the helicopter; • wind limitations. The data are presented as a polar diagramme , the radius representing the wind speed and the...Systems CAD Cartridge Actuated Device CG Center of Gravity DI Dynamic Interface EFP Elevated Fixed Platform FA Fore Aft FFG Guided Missile Fast Frigate...not be able to complete all the planned data points. The nature of DI testing results in a fast paced test program once flight testing begins. It is
A Method for and Issues Associated with the Determination of Space Suit Joint Requirements
NASA Technical Reports Server (NTRS)
Matty, Jennifer E.; Aitchison, Lindsay
2010-01-01
This joint mobility KC lecture included information from two papers, "A Method for and Issues Associated with the Determination of Space Suit Joint Requirements" and "Results and Analysis from Space Suit Joint Torque Testing," as presented for the International Conference on Environmental Systems in 2009 and 2010, respectively. The first paper discusses historical joint torque testing methodologies and approaches that were tested in 2008 and 2009. The second paper discusses the testing that was completed in 2009 and 2010.
Computer-aided testing of pilot response to critical in-flight events
NASA Technical Reports Server (NTRS)
Giffin, W. C.; Rockwell, T. H.
1984-01-01
This research on pilot response to critical in-flight events employs a unique methodology including an interactive computer-aided scenario-testing system. Navigation displays, instrument-panel displays, and assorted textual material are presented on a touch-sensitive CRT screen. Problem diagnosis scenarios, destination-diversion scenarios and combined destination/diagnostic tests are available. A complete time history of all data inquiries and responses is maintained. Sample results of diagnosis scenarios obtained from testing 38 licensed pilots are presented and discussed.
Kopp, Bruno; Rösser, Nina; Tabeling, Sandra; Stürenburg, Hans Jörg; de Haan, Bianca; Karnath, Hans-Otto; Wessel, Karl
2015-01-01
Measures of performance on the Trail Making Test (TMT) are among the most popular neuropsychological assessment techniques. Completion time on TMT-A is considered to provide a measure of processing speed, whereas completion time on TMT-B is considered to constitute a behavioral measure of the ability to shift between cognitive sets (cognitive flexibility), commonly attributed to the frontal lobes. However, empirical evidence linking performance on the TMT-B to localized frontal lesions is mostly lacking. Here, we examined the association of frontal lesions following stroke with TMT-B performance measures (i.e., completion time and completion accuracy measures) using voxel-based lesion-behavior mapping, with a focus on right hemispheric frontal lobe lesions. Our results suggest that the number of errors, but not completion time on the TMT-B, is associated with right hemispheric frontal lesions. This finding contradicts common clinical practice—the use of completion time on the TMT-B to measure cognitive flexibility, and it underscores the need for additional research on the association between cognitive flexibility and the frontal lobes. Further work in a larger sample, including left frontal lobe damage and with more power to detect effects of right posterior brain injury, is necessary to determine whether our observation is specific for right frontal lesions. PMID:26074673
Walser, Moritz; Plessow, Franziska; Goschke, Thomas; Fischer, Rico
2014-07-01
Previous studies have shown that completed prospective memory (PM) intentions entail aftereffects in terms of ongoing-task-performance decrements in trials containing repeated PM cues which previously served as PM cues triggering the intended action. Previous research reported that PM aftereffects decrease over time, thus revealing a specific time course of PM aftereffects. In the present study, we tested two accounts for this pattern, assuming either that the decline of aftereffects is related to the temporal distance to PM task completion or may be a result of the repeated exposure of repeated PM cues in the ongoing task. In three experiments, we manipulated both the temporal distance to PM task completion and the frequency of repeated PM cues and demonstrated that aftereffects of completed intentions declined with repeated exposure of formerly relevant PM cues. In addition, effects of repeated exposure were not only limited to the repetition of specific PM-cue exemplars but also generalized to other semantically related PM cues within the PM-cue category. Together, findings show that decreased aftereffects of completed intentions are not related to the temporal duration of the subsequent test block, but crucially depend on the repeated exposure of the previously relevant PM cues.
Thermal Testing of Ablators in the NASA Johnson Space Center Radiant Heat Test Facility
NASA Technical Reports Server (NTRS)
Del Papa, Steven; Milhoan, Jim; Remark, Brian; Suess, Leonard
2016-01-01
A spacecraft's thermal protection system (TPS) is required to survive the harsh environment experienced during reentry. Accurate thermal modeling of the TPS is required to since uncertainties in the thermal response result in higher design margins and an increase in mass. The Radiant Heat Test Facility (RHTF) located at the NASA Johnson Space Center (JSC) replicates the reentry temperatures and pressures on system level full scale TPS test models for the validation of thermal math models. Reusable TPS, i.e. tile or reinforced carbon-carbon (RCC), have been the primary materials tested in the past. However, current capsule designs for MPCV and commercial programs have required the use of an ablator TPS. The RHTF has successfully completed a pathfinder program on avcoat ablator material to demonstrate the feasibility of ablator testing. The test results and corresponding ablation analysis results are presented in this paper.
Hall, Charlotte L; James, Marilyn; Brown, Sue; Martin, Jennifer L; Brown, Nikki; Selby, Kim; Clarke, Julie; Vijayan, Hena; Guo, Boliang; Sayal, Kapil; Hollis, Chris; Groom, Madeleine J
2018-02-15
Attention-deficit hyperactivity disorder (ADHD) is characterised by symptoms of inattention, hyperactivity and impulsivity. To improve outcomes, the National Institute for Health and Care Excellence ADHD guidelines recommend regular monitoring of symptoms when children commence medication. However, research suggests that routine monitoring rarely happens, and clinicians often rely on subjective information such as reports from parents and teachers to ascertain improvement. These sources can be unreliable and difficult to obtain. The addition of an objective test of attention and activity (QbTest) may improve the objectivity, reliability and speed of clinical decision-making and so reduce the time to identify the optimal medication dose. This study aims to assess the feasibility and acceptability of a QbTest medication management protocol delivered in routine healthcare services for children with ADHD. This multisite feasibility randomised controlled trial (RCT) will recruit 60 young people (aged 6-17 years old), diagnosed with ADHD, and starting stimulant medication who are seen by Child and Adolescent Mental Health Services or Community Paediatric services. Participants will be randomised into one of two arms. In the experimental arm (QbTest protocol), the participant will complete a QbTest at baseline (prior to medication initiation), and two follow-up QbTests on medication (2-4 weeks and 8-10 weeks later). In the control arm, participants will receive treatment as usual, with at least two follow-up consultations. Measures of parent-, teacher- and clinician-rated symptoms and global functioning will be completed at each time point. Health economic measures will be completed. Clinicians will record treatment decision-making. Acceptability and feasibility of the protocol will be assessed alongside outcome measure completion rates. Qualitative interviews will be conducted. The findings will be used to inform the development of a fully powered RCT. The results will be submitted for publication in peer-reviewed journals. The study has ethical approval. NCT03368573; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Prather, H; Harris-Hayes, M; Hunt, D; Steger-May, K; Mathew, V; Clohisy, JC
2012-01-01
Objective The objectives of this study are the following: 1) report passive hip ROM in asymptomatic young adults, 2) report the intra-tester and inter-tester reliability of hip ROM measurements among testers of multiple disciplines, 3) report the results of provocative hip tests and tester agreement. Design descriptive epidemiology study Setting tertiary university Participants Twenty-eight young adult volunteers without musculoskeletal symptoms, history of disorder or surgery involving the lumbar spine or lower extremities were enrolled and completed the study. Methods Asymptomatic young adult volunteers completed questionnaires and were examined by two blinded examiners during a single session. The testers were physical therapists and physicians. Hip range of motion and provocative tests were completed by both examiners on each hip. Main Outcome Measurements Inter and intra-rater reliability for ROM and agreement for provocative tests was determined. Results Twenty-eight asymptomatic adults with mean age 31 years old (range 18–51 years) and mean modified Harris Hip Score of 99.5 ± 1.5 and UCLA Activity score of 8.8 ± 1.2 completed the study. Intra-rater agreement was excellent for all hip range of motion measurements, with intraclass correlation coefficients (ICCs) ranging from 0.76 to 0.97 with similar agreement if the examiner was a physical therapist or a physician. Excellent inter-rater reliability was found for hip flexion ICC 0.87 (95% CI 0.78 to 0.92), supine internal rotation ICC 0.75 (95% CI 0.60 to 0.84) and prone internal rotation ICC 0.79 (95% CI 0.66 to 0.87). The least reliable measurements were supine hip abduction (ICC 0.34) and supine external rotation (ICC 0.18). Agreement between examiners ranged from 96–100% for provocative hip tests which included the hip impingement, resisted straight leg raise, FABER/Patrick’s and log roll tests. Conclusions Specific hip ROM measures show excellent inter-rater reliability and provocative hip tests show good agreement among multiple examiners and medical disciplines. Further studies are needed to assess the utilization of these measurements and tests as a part of a hip screening examination to assess for young adults at risk intra-articular hip disorders prior to the onset of degenerative changes. PMID:20970757
Rubel, M A; Werner-Lin, A; Barg, F K; Bernhardt, B A
2017-09-01
To assess how participants receiving abnormal prenatal genetic testing results seek information and understand the implications of results, 27 US female patients and 12 of their male partners receiving positive prenatal microarray testing results completed semi-structured phone interviews. These interviews documented participant experiences with chromosomal microarray testing, understanding of and emotional response to receiving results, factors affecting decision-making about testing and pregnancy termination, and psychosocial needs throughout the testing process. Interview data were analyzed using a modified grounded theory approach. In the absence of certainty about the implications of results, understanding of results is shaped by biomedical expert knowledge (BEK) and cultural expert knowledge (CEK). When there is a dearth of BEK, as in the case of receiving results of uncertain significance, participants rely on CEK, including religious/spiritual beliefs, "gut instinct," embodied knowledge, and social network informants. CEK is a powerful platform to guide understanding of prenatal genetic testing results. The utility of culturally situated expert knowledge during testing uncertainty emphasizes that decision-making occurs within discourses beyond the biomedical domain. These forms of "knowing" may be integrated into clinical consideration of efficacious patient assessment and counseling.
Solvent Replacement for Hydrochlorofluorocarbon-225 for Cleaning Oxygen System Components
NASA Technical Reports Server (NTRS)
Mitchell, M. A.; Lowrey, N. M.
2017-01-01
This Technical Memorandum is the result of a 2-year project funded by the Defense Logistics Agency-Aviation, Hazardous Minimization and Green Products Branch, to identify and test two candidate solvents to replace hydrochlorofluorocarbon-225 (HCFC-225) for cleaning oxygen systems. The solvents were also compared to a second solvent composed predominantly of perfluorobutyl iodide (PFBI), which had received limited approval by the United States Air Force (USAF) for hand wipe cleaning of components for aviators’ breathing oxygen systems. The tests performed for this study were based on those reported in AFRL-ML-WP-TR-2003-4040, “The Wipe Solvent Program,” the test program used to qualify Ikon® Solvent P for USAF applications.The study was completed in August 2014, prior to the completion of a more extensive study funded by the NASA Rocket Propulsion Test (RPT) program. The results of the RPT project are reported in NASA/TP-2015-18207, “Replacement of Hydrochlorofluorocarbon–225 Solvent for Cleaning and Verification Sampling of NASA Propulsion Oxygen Systems Hardware, Ground Support Equipment, and Associated Test Systems.” The test methods used in this study for nonvolatile residue (NVR) background, materials compatibility, and cleaning effectiveness were different than those used for the RPT project; a smaller set of materials and contaminants were tested. The tests for this study were complementary to and provided supplementary information for the down-selection process during the course of the test program reported in NASA/TP-2015-218207.
Sharp, Susan E; Ruden, Lila O; Pohl, Julie C; Hatcher, Patricia A; Jayne, Linda M; Ivie, W Michael
2010-06-01
The diagnosis of Clostridium difficile infection continues to be a challenge for many clinical microbiology laboratories. A new lateral flow assay, the C.Diff Quik Chek Complete assay, which tests for the presence of both glutamate dehydrogenase (GDH) and C. difficile toxins A and B, was evaluated for its ability to diagnose C. difficile disease. The results of this assay were compared to those of both PCR and toxigenic culture. The results showed that this assay allows 88% of specimens to be accurately screened as either positive (both tests positive) or negative (both tests negative) for the presence of toxigenic C. difficile in less than 30 min and with minimal hands-on time. Use of a random-access PCR for the analysis of specimens with discrepant results (one test positive and the other negative) allows the easy, rapid, and highly sensitive (100%; 95% confidence interval [CI], 89.6 to 100%) and specific (99.6%; 95% CI, 97.3 to 99.9%) diagnosis of C. difficile disease. The use of this algorithm would save institutional costs, curtail unnecessary isolation days, reduce the nosocomial transmission of disease, and increase the quality of care for patients.
Sharp, Susan E.; Ruden, Lila O.; Pohl, Julie C.; Hatcher, Patricia A.; Jayne, Linda M.; Ivie, W. Michael
2010-01-01
The diagnosis of Clostridium difficile infection continues to be a challenge for many clinical microbiology laboratories. A new lateral flow assay, the C.Diff Quik Chek Complete assay, which tests for the presence of both glutamate dehydrogenase (GDH) and C. difficile toxins A and B, was evaluated for its ability to diagnose C. difficile disease. The results of this assay were compared to those of both PCR and toxigenic culture. The results showed that this assay allows 88% of specimens to be accurately screened as either positive (both tests positive) or negative (both tests negative) for the presence of toxigenic C. difficile in less than 30 min and with minimal hands-on time. Use of a random-access PCR for the analysis of specimens with discrepant results (one test positive and the other negative) allows the easy, rapid, and highly sensitive (100%; 95% confidence interval [CI], 89.6 to 100%) and specific (99.6%; 95% CI, 97.3 to 99.9%) diagnosis of C. difficile disease. The use of this algorithm would save institutional costs, curtail unnecessary isolation days, reduce the nosocomial transmission of disease, and increase the quality of care for patients. PMID:20375230
Reliability Evaluation of Concentrator Photovoltaic Modules per IEC Qualification Specifications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tamizhmani, Govindasamy
2012-12-05
This project is related to the qualification testing of new generation CPV (concentrator photovoltaics) modules at lower testing costs and lower turnaround time. In this project, the first testing program was completed for two CPV manufacturers, the second testing program was completed for two manufacturers at 65% of the actual testing cost and at less than 3 months of testing turnaround time and the third testing program was completed for two manufacturers at 65% of the actual testing cost and at less than 3 months of testing turnaround time. Due to their financial situation and restructuring, Amonix (one of themore » CPV manufacturers) intermittently terminated the test programs.« less
Comparison of five assays for detection of Clostridium difficile toxin.
Chapin, Kimberle C; Dickenson, Roberta A; Wu, Fongman; Andrea, Sarah B
2011-07-01
Performance characteristics of five assays for detection of Clostridium difficile toxin were compared using fresh stool samples from patients with C. difficile infection (CDI). Assays were performed simultaneously and according to the manufacturers' instructions. Patients were included in the study if they exhibited clinical symptoms consistent with CDI. Nonmolecular assays included glutamate dehydrogenase antigen tests, with positive findings followed by the Premier Toxin A and B Enzyme Immunoassay (GDH/EIA), and the C. Diff Quik Chek Complete test. Molecular assays (PCR) included the BD GeneOhm Cdiff Assay, the Xpert C. difficile test, and the ProGastro Cd assay. Specimens were considered true positive if results were positive in two or more assays. For each method, the Youden index was calculated and cost-effectiveness was analyzed. Of 81 patients evaluated, 26 (32.1%) were positive for CDI. Sensitivity of the BD GeneOhm Cdiff assay, the Xpert C. difficile test, the ProGastro Cd assay, C. Diff Quik Chek Complete test, and two-step GDH/EIA was 96.2%, 96.2%, 88.5%, 61.5%, and 42.3%, respectively. Specificity of the Xpert C. difficile test was 96.4%, and for the other four assays was 100%. Compared with nonmolecular methods, molecular methods detected 34.7% more positive specimens. Assessment of performance characteristics and cost-effectiveness demonstrated that the BD GeneOhm Cdiff assay yielded the best results. While costly, the Xpert C. difficile test required limited processing and yielded rapid results. Because of discordant results, specimen processing, and extraction equipment requirements, the ProGastro Cd assay was the least favored molecular assay. The GDH/EIA method lacked sufficient sensitivity to be recommended. Copyright © 2011 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.
Comparison of Five Assays for Detection of Clostridium difficile Toxin
Chapin, Kimberle C.; Dickenson, Roberta A.; Wu, Fongman; Andrea, Sarah B.
2011-01-01
Performance characteristics of five assays for detection of Clostridium difficile toxin were compared using fresh stool samples from patients with C. difficile infection (CDI). Assays were performed simultaneously and according to the manufacturers' instructions. Patients were included in the study if they exhibited clinical symptoms consistent with CDI. Nonmolecular assays included glutamate dehydrogenase antigen tests, with positive findings followed by the Premier Toxin A and B Enzyme Immunoassay (GDH/EIA), and the C. Diff Quik Chek Complete test. Molecular assays (PCR) included the BD GeneOhm Cdiff Assay, the Xpert C. difficile test, and the ProGastro Cd assay. Specimens were considered true positive if results were positive in two or more assays. For each method, the Youden index was calculated and cost-effectiveness was analyzed. Of 81 patients evaluated, 26 (32.1%) were positive for CDI. Sensitivity of the BD GeneOhm Cdiff assay, the Xpert C. difficile test, the ProGastro Cd assay, C. Diff Quik Chek Complete test, and two-step GDH/EIA was 96.2%, 96.2%, 88.5%, 61.5%, and 42.3%, respectively. Specificity of the Xpert C. difficile test was 96.4%, and for the other four assays was 100%. Compared with nonmolecular methods, molecular methods detected 34.7% more positive specimens. Assessment of performance characteristics and cost-effectiveness demonstrated that the BD GeneOhm Cdiff assay yielded the best results. While costly, the Xpert C. difficile test required limited processing and yielded rapid results. Because of discordant results, specimen processing, and extraction equipment requirements, the ProGastro Cd assay was the least favored molecular assay. The GDH/EIA method lacked sufficient sensitivity to be recommended. PMID:21704273
NASA Technical Reports Server (NTRS)
Park, Sang C.; Brinckerhoff, Pamela; Franck, Randy; Schweickart, Rusty; Thomson, Shaun; Burt, Bill; Ousley, Wes
2016-01-01
The James Webb Space Telescope (JWST) Optical Telescope Element (OTE) assembly is the largest optically stable infrared-optimized telescope currently being manufactured and assembled, and scheduled for launch in 2018. The JWST OTE, including the primary mirrors, secondary mirror, and the Aft Optics Subsystems (AOS) are designed to be passively cooled and operate at near 45 degrees Kelvin. Due to the size of its large sunshield in relation to existing test facilities, JWST cannot be optically or thermally tested as a complete observatory-level system at flight temperatures. As a result, the telescope portion along with its instrument complement will be tested as a single unit very late in the program, and on the program schedule critical path. To mitigate schedule risks, a set of 'pathfinder' cryogenic tests will be performed to reduce program risks by demonstrating the optical testing capabilities of the facility, characterizing telescope thermal performance, and allowing project personnel to learn valuable testing lessons off-line. This paper describes the 'pathfinder' cryogenic test program, focusing on the recently completed second test in the series called the Optical Ground Support Equipment 2 (OGSE2) test. The JWST OGSE2 was successfully completed within the allocated project schedule while faced with numerous conflicting thermal requirements during cool-down to the final cryogenic operational temperatures, and during warm-up after the cryo-stable optical tests. The challenges include developing a pre-test cool-down and warm-up profiles without a reliable method to predict the thermal behaviors in a rarified helium environment, and managing the test article hardware safety driven by the project Limits and Constraints (L&C's). Furthermore, OGSE2 test included the time critical Aft Optics Subsystem (AOS), a part of the flight Optical Telescope Element that would need to be placed back in the overall telescope assembly integrations. The OGSE2 test requirements included the strict adherence of the project contamination controls due to the presence of the contamination sensitive flight optical elements. The test operations required close coordination of numerous personnel while they being exposed and trained for the 'final' combined OTE and instrument cryo-test in 2017. This paper will also encompass the OGSE2 thermal data look-back review.
2016-07-01
ER D C/ EL C R- 16 -5 Aquatic Plant Control Research Program Complete Host Range Testing on Common Reed with Potential Biological...client/default. Aquatic Plant Control Research Program ERDC/EL CR-16-5 July 2016 Complete Host Range Testing on Common Reed with Potential...and started with sequential no-choice oviposition tests. So far, no eggs were found on any of the 22 test plants offered. The authors also found the
Life testing of secondary silver-zinc cells for the orbiting maneuvering vehicle
NASA Technical Reports Server (NTRS)
Brewer, Jeffrey C.; Doreswamy, Rajiv; Jackson, Lorna G.
1990-01-01
Over the past 5 years, extensive testing has been performed at the Marshall Space Flight Center (MSFC) on a variety of secondary (rechargeable) silver-zinc (Ag-Zn) cells for the Orbital Maneuvering Vehicle (OMV). The first tests performed were to determine the feasibility of using such a cell in a long-life (18-month), low-Earth-orbit (LEO) application. Results from these tests were promising, so testing continued with a 250-Ah cell that was specifically designed for this type of application. Once again, results from the tests were promising. Following a review of the data from these previous tests, slight modifications to the 250-Ah design were necessary to alleviate problem areas. Currently, MSFC is testing a 350-Ah design that has incorporated these changes and is the baseline design for the OMV. This test began in mid-November, 1989, and will be complete in the spring of 1991, barring any substantial offline time. A report is presented on the preliminary results from the first few months of this test and they are compared to results obtained in previous tests done at MFSC.
The Ames 12-Foot Pressure Tunnel: Tunnel Empty Flow Calibration Results and Discussion
NASA Technical Reports Server (NTRS)
Zell, Peter T.; Banducci, David E. (Technical Monitor)
1996-01-01
An empty test section flow calibration of the refurbished NASA Ames 12-Foot Pressure Tunnel was recently completed. Distributions of total pressure, dynamic pressure, Mach number, flow angularity temperature, and turbulence are presented along with results obtained prior to facility demolition. Axial static pressure distributions along tunnel centerline are also compared. Test section model support geometric configurations will be presented along with a discussion of the issues involved with different model mounting schemes.
Does the generation effect occur for pictures?
Kinjo, H; Snodgrass, J G
2000-01-01
The generation effect is the finding that self-generated stimuli are recalled and recognized better than read stimuli. The effect has been demonstrated primarily with words. This article examines the effect for pictures in two experiments: Subjects named complete pictures (name condition) and fragmented pictures (generation condition). In Experiment 1, memory was tested in 3 explicit tasks: free recall, yes/no recognition, and a source-monitoring task on whether each picture was complete or fragmented (the complete/incomplete task). The generation effect was found for all 3 tasks. However, in the recognition and source-monitoring tasks, the generation effect was observed only in the generation condition. We hypothesized that absence of the effect in the name condition was due to the sensory or process match effect between study and test pictures and the superior identification of pictures in the name condition. Therefore, stimuli were changed from pictures to their names in Experiment 2. Memory was tested in the recognition task, complete/incomplete task, and second source-monitoring task (success/failure) on whether each picture had been identified successfully. The generation effect was observed for all 3 tasks. These results suggest that memory of structural and semantic characteristics and of success in identification of generated pictures may contribute to the generation effect.
MIUS integration and subsystems test program
NASA Technical Reports Server (NTRS)
Beckham, W. S., Jr.; Shows, G. C.; Redding, T. E.; Wadle, R. C.; Keough, M. B.; Poradek, J. C.
1976-01-01
The MIUS Integration and Subsystems Test (MIST) facility at the Lyndon B. Johnson Space Center was completed and ready in May 1974 for conducting specific tests in direct support of the Modular Integrated Utility System (MIUS). A series of subsystems and integrated tests was conducted since that time, culminating in a series of 24-hour dynamic tests to further demonstrate the capabilities of the MIUS Program concepts to meet typical utility load profiles for a residential area. Results of the MIST Program are presented which achieved demonstrated plant thermal efficiencies ranging from 57 to 65 percent.
Methodical aspects of text testing in a driving simulator.
Sundin, A; Patten, C J D; Bergmark, M; Hedberg, A; Iraeus, I-M; Pettersson, I
2012-01-01
A test with 30 test persons was conducted in a driving simulator. The test was a concept exploration and comparison of existing user interaction technologies for text message handling with focus on traffic safety and experience (technology familiarity and learning effects). Focus was put on methodical aspects how to measure and how to analyze the data. Results show difficulties with the eye tracking system (calibration etc.) per se, and also include the subsequent raw data preparation. The physical setup in the car where found important for the test completion.
Wave Energy Prize - 1/20th Testing - CalWave Power Technologies
Scharmen, Wesley
2016-09-09
Data from the 1/20th scale testing data completed on the Wave Energy Prize for the CalWave Power Technologies team, including the 1/20th scale test plan, raw test data, video, photos, and data analysis results. The top level objective of the 1/20th scale device testing is to obtain the necessary measurements required for determining Average Climate Capture Width per Characteristic Capital Expenditure (ACE) and the Hydrodynamic Performance Quality (HPQ), key metrics for determining the Wave Energy Prize (WEP) winners.
Fuel Cycle Research & Development Technical Monthly-March 2012
DOE Office of Scientific and Technical Information (OSTI.GOV)
Miller, Michael C.
2012-05-10
Several MPACT BCPs were executed in February, reflecting the shift in MPACT priorities directed late last year. Work continued on the FY2014 IPL, also bringing it in line with the new priorities. Preparations were made for the March MPACT Working Group meeting, in conjunction with Savannah River which is hosting the meeting. Steps were taken to initiate a new project with the World Institute for Nuclear Security, including discussions with WINS staff and preliminary work on the required procurement documentation. Several hardware issues were worked through. The newest detector array is working at LANL. A thorough analysis of previously collectedmore » Pu sample data using recently developed analysis code with improved spectral energy calibrations was completed. We now have a significantly better understanding of measurement uncertainties. Post-test analyses of the salt and sensor material for the first sensor test are almost complete. Sensor testing with different arrangements will continue and will be oriented based on post-test analysis of the first sensor test. Sensor materials for the next couple of tests are being fabricated. Materials with different annealing temperatures are being prepared for analysis. Fast Neutron Imaging to Quantify Nuclear Materials - The imager detectors repairs are complete and work with the imager is under way. The milestone requiring a report on LANSCE experiments was completed and submitted. Analysis of previous experiments and comparisons to simulations is near complete. Results are being compared with previous LANSCE-LSDS and RPI results. Additional data library (TENDL) is also being checked to see whether there are differences in the simulation results. The mid-year MIP Monitor project accomplishments and progress was presented at the MPACT meeting held in March at SRNL. Discussions around the meeting included inquiries into the feasibility of collecting process measurement data at H-Canyon, and it was explored further after the meeting. Kenneth Dayman, the graduate student from University of Texas, completed an initial draft of his master's thesis. His research will contribute to the multivariate classifier currently under development. Sarah Bender, the graduate student from Pennsylvania State University, presented her work on a poster and in a conference paper at the MARC IX meeting. A mass balance flowsheet for the fast reactor fuel was completed and a model simulation is scheduled to begin construction next month. The development of a mass balance flowsheet for light water reactor fuel will predict the behavior of the separation process using mathematical functions. The completed flowsheet will be utilized as the basis for constructing the model simulation for the electrochemical separations. Comments and review of the model from the MPACT Working Group meeting have been used to evaluate updates to the EChem model. A preliminary physical security layout has been developed in ATLAS. Thermal stability tests for high temperature microfluidic interconnections were completed on all compounds tested for bonding strength. An interconnection strategy was determined based on these results that we expect will allow for operation at 400C in the first generation of sampling systems. Design of the sampling system using the chosen interconnections was initiated, with handoff to an external foundry for fabrication based on ANL specified process conditions expected by the middle of the month. Monte Carlo simulations of the sampling system were conducted under conditions of realistic sampling size distributions, electrorefiner inhomogeneity distributions, and detector efficiencies. These simulations were used to establish a baseline limit of detection for system operation, assuming an on-line separation step is conducted before detection. Sensor for measuring density and depth of molten electrolyte - The procurement effort continued. 80% of the components ordered to assemble the double bubbler have arrived at the INL. Pratap Sadasivan, and his team have been working on the new metrics for proliferation and security. They have defined the basic structure and method, implementation strategy, needed data, and approach to application. Initial drafting of several sections of the milestone document was started. The MPACT Working Group meeting was hosted at SRS on March 13-15, 2012. Approximately 65 researchers from national labs, industry and universities attended the technical meetings at the Center for Hydrogen Research on March 13-14 with a working lunch each day. 37 persons participated in a site tour, including H-Canyon and the MOX Facility, on March 15. As part of the WG meeting, a presentation by SRNL was given on H-Canyon history, capabilities and opportunities for its use as an MPACT technology test bed. Used fuels storage security analysis, guidance and best practices - Coordination discussions continued for the MPACT used fuel security work packages.« less
McKinnon, Wendy; Naud, Shelly; Ashikaga, Taka; Colletti, Rose; Wood, Marie
2007-08-01
: Providing medical management updates and long-term support to families with hereditary cancer syndromes in rural areas is a challenge. To address this, we designed a one-day retreat for BRCA1/2 carriers in our region. The retreat included educational updates about medical management, genetic privacy and discrimination, and addressed psychological and family issues. Evaluations completed at the conclusion of the retreat were overwhelmingly positive with requests for a similar event in the future. The impact of this retreat on a variety of health behaviors was assessed. Eligible participants completed questionnaires before and 6 months after the retreat. Questionnaires focused on lifestyle, cancer screening and prevention practices, psychological history and distress, decision-making regarding genetic testing, and family communication issues. For individuals who completed both the pre and post retreat questionnaires, one-half made lifestyle changes and nearly two-thirds increased cancer screening, initiated chemoprevention, completed or planned to complete preventative surgery in the future. We conclude that this type of forum provides a valuable opportunity for BRCA carriers and their families to receive updated medical information, share personal experiences, provide and receive support, as well as change health behaviors.
Comparison of antimicrobial activity of selected, commercially available wound dressing materials.
Szweda, Piotr; Gorczyca, Grzegorz; Tylingo, Robert
2018-05-02
The aim of our study was to examine the antimicrobial potential of eight selected, commercially available wound dressings containing different antimicrobial agents: silver, chlorhexidine acetate, povidone-iodine, and manuka honey. The materials were tested against four reference strains of bacteria: Staphylococcus aureus (PCM 2051), Staphylococcus epidermidis (PCM 2118), Pseudomonas aeruginosa (ATCC 27853), and Escherichia coli (K12), using the disc diffusion-like method and a time-killing assay. For both experiments, the highest activity against all four tested strains of bacteria was observed in the case of Mepilex Ag, which contains silver as an antibacterial agent. Incubation for four hours of a 10x10mm 2 piece of this material in 10ml cells suspension (concentration: 10 9 -10 10 CFU/ml) resulted in complete elimination of bacteria of all four strains tested. The same results were obtained for a povidone-iodine containing dressing, Inadine, though its activity was lower in the disc diffusion assay. Silvercel, Aquacel Ag and Melgisorb Ag, which also contain silver, also exhibited a satisfactory level of activity. In the case of Aquacel Ag, 24 hours' incubation resulted in complete elimination of the cells of both Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa.The Escherichia coli cells were killed after only four hours' treatment. High effectiveness against Escherichia coli was also demonstrated for Silvercel. However, 24 hours' includation was required for complete elimination of the cells of this bacteria strain. High activity against all tested bacteria, but only in the disc diffusion assay, was observed for Algivon, which contains manuka honey. The Medisorb Silver Pad, containing silver, and Bactigras, which contains chlorhexidine acetate, revealed much lower antimicrobial activity, particularly noticeable in the time-killing assay. In addition, we also tested the anti-staphylococcal activity of a biopolymer material impregnated with lysostaphin. Results revealed that its activity against Staphylococcus aureus was comparable to the most active wound dressings impregnated with silver or inadine. Some important differences in the antimicrobial potential of investigated materials have been found. The presented results could be of interest to clinicians managing wounds.
Skinner, Andy; Coyle, David; Lawrence, Natalia; Munafo, Marcus
2017-01-01
Background The prospect of assessing cognition longitudinally and remotely is attractive to researchers, health practitioners, and pharmaceutical companies alike. However, such repeated testing regimes place a considerable burden on participants, and with cognitive tasks typically being regarded as effortful and unengaging, these studies may experience high levels of participant attrition. One potential solution is to gamify these tasks to make them more engaging: increasing participant willingness to take part and reducing attrition. However, such an approach must balance task validity with the introduction of entertaining gamelike elements. Objective This study aims to investigate the effects of gamelike features on participant attrition using a between-subjects, longitudinal Web-based testing study. Methods We used three variants of a common cognitive task, the Stop Signal Task (SST), with a single gamelike feature in each: one variant where points were rewarded for performing optimally; another where the task was given a graphical theme; and a third variant, which was a standard SST and served as a control condition. Participants completed four compulsory test sessions over 4 consecutive days before entering a 6-day voluntary testing period where they faced a daily decision to either drop out or continue taking part. Participants were paid for each session they completed. Results A total of 482 participants signed up to take part in the study, with 265 completing the requisite four consecutive test sessions. No evidence of an effect of gamification on attrition was observed. A log-rank test showed no evidence of a difference in dropout rates between task variants (χ22=3.0, P=.22), and a one-way analysis of variance of the mean number of sessions completed per participant in each variant also showed no evidence of a difference (F2,262=1.534, P=.21, partial η2=0.012). Conclusions Our findings raise doubts about the ability of gamification to reduce attrition from longitudinal cognitive testing studies. PMID:29167090
Test Series 2. 2: Detailed Test Plan
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Test Series 2.2 comprises the third sub-series of tests to be scheduled as a part of Test Series 2, the second stage of the combustion research program to be carried out at the Grimethorpe Experimental Pressurized Fluidized Bed Combustion Facility. Test Series 2.1, the first sub-series of tests, was completed in February 1983, and the first half of the second sub-series, Test Series 2.3, in October 1983. Test Series 2.2 is to consist of 350 data gathering hours, which it is hoped to complete within 560 coal burning hours. This document provides a brief description of the Facility and modificationsmore » which have been made following the completion of Test Series 2.1. No further modifications were made following the completion of the first half of Test Series 2.3. The operating requirements are specified. The tests will be performed using a UK coal (Kiveton Park), and a UK limestone (Middleton) both nominated by the FRG. Nine objectives are proposed which are to be fulfilled by thirteen test conditions. Six part load tests are included, as defined by Kraftwerk Union AG. The cascade is expected to be on line for each test condition and total cascade exposure is expected to be in excess of 450 hours. Details of sampling and special measurements are given. A test plan schedule envisages the test series being completed within a two month calendar period. Finally, a number of contingency strategies are proposed.« less
Diode step stress program for JANTX1N5615
NASA Technical Reports Server (NTRS)
1979-01-01
The effect of power/temperature step stress when applied to the switching diode JANTX1N5615 manufactured by Semtech and Micro semiconductor was examined. A total of 48 samples from each manufacturer were submitted to the process. In addition, two control sample units were maintained for verification of the electrical parametric testing. All test samples were subjected to the electrical tests after completing the prior power/temperature step stress point. Results are presented.
49 CFR 571.403 - Standard No. 403; Platform lift systems for motor vehicles.
Code of Federal Regulations, 2014 CFR
2014-10-01
... conducting the fatigue test in S7.10. S6.5.1.2Private use lifts. Except for lifts that manually stow (fold... as a result of conducting the fatigue test in S7.10. S6.5.2Proof load. The platform lift must be... 100 cm2 (15.5 in2) of surface area. Begin the test specified in S7.2.2 within 30 seconds of completion...
49 CFR 571.403 - Standard No. 403; Platform lift systems for motor vehicles.
Code of Federal Regulations, 2013 CFR
2013-10-01
... conducting the fatigue test in S7.10. S6.5.1.2Private use lifts. Except for lifts that manually stow (fold... as a result of conducting the fatigue test in S7.10. S6.5.2Proof load. The platform lift must be... 100 cm2 (15.5 in2) of surface area. Begin the test specified in S7.2.2 within 30 seconds of completion...
Assessing children's cognitive flexibility with the Shape Trail Test.
Chan, Amy Y C; Morgan, Sarah-Jane
2018-01-01
In this paper we report an initial validation of the Shape Trail Test-Child Version (STT-CV) with a non-clinical sample of children aged 6 to 9 years. The STT-CV has been developed as an age-appropriate and culturally fair direct downward extension of the Trail Making Test (TMT) for the assessment of cognitive flexibility. Children completed the STT-CV and four established measures of executive functions that assessed working memory, inhibitory control and task switching. Results showed the expected age-based differences in completion times for both parts of the STT-CV (Trail A and Trail B). Children's performance on the STT-CV correlated significantly with all four measures of executive functions. After controlling for the effects of chronological age, completion times for Trail B remained correlated with most other measures of executive functions. These findings provide emerging evidence for the utility of the STT-CV, and highlight the need for designing and using appropriate variants of the TMT in the behavioural assessment of cognitive flexibility in developmentally and culturally diverse populations.
Point-of-Care Testing for Anemia, Diabetes, and Hypertension: A Pharmacy-Based Model in Lima, Peru.
Saldarriaga, Enrique M; Vodicka, Elisabeth; La Rosa, Sayda; Valderrama, Maria; Garcia, Patricia J
Prevention and control of chronic diseases is a high priority for many low- and middle-income countries. This study evaluated the feasibility and acceptability of training pharmacy workers to provide point-of-care testing for 3 chronic diseases-hypertension, diabetes, and anemia-to improve disease detection and awareness through private pharmacies. We developed a multiphase training curriculum for pharmacists and pharmacy technicians to build capacity for identification of risk factors, patient education, point-of-care testing, and referral for abnormal results. We conducted a pre-post evaluation with participants and evaluated results using Student t test for proportions. We conducted point-of-care testing with pharmacy clients and evaluated acceptability by patient characteristics (age, gender, and type of patient) using multiple logistic regression. In total, 72 pharmacy workers (66%) completed the full training curriculum. Pretest scores indicated that pharmacists had more knowledge and skills in chronic disease risk factors, patient education, and testing than pharmacy technicians. All participants improved their knowledge and skills after the training, and post-test scores indicated that pharmacy technicians achieved the same level of competency as pharmacists (P < .01). Additionally, 698 clients received at least 1 test during the study; 53% completed the acceptability survey. Nearly 100% thought the pharmacy could provide faster results, faster and better attention, and better access to basic screening for hypertension, diabetes, and anemia than a traditional health center. Fast service was very important: 41% ranked faster results and 30% ranked faster attention as the most important factor for receiving diagnostic testing in the pharmacy. We found that it is both feasible for pharmacies and acceptable to clients to train pharmacy workers to provide point-of-care testing for anemia, diabetes, and hypertension. This innovative approach holds potential to increase early detection of risk factors and bolster disease prevention and management efforts in Peru and other low- and middle-income settings. Copyright © 2017. Published by Elsevier Inc.
30 CFR 250.467 - How long must I keep records?
Code of Federal Regulations, 2010 CFR
2010-07-01
... days after you complete drilling operations. (b) Casing and liner pressure tests, diverter tests, and BOP tests Two years after the completion of drilling operations. (c) Completion of a well or of any... Permit to Modify and Well Records § 250.467 How long must I keep records? You must keep records for the...
The Role of Participant Responsiveness on a Socio-Emotional Learning Program.
Pereira, Nádia Salgado; Marques-Pinto, Alexandra
2017-01-19
The present study set out to evaluate participant responsiveness, one of the main dimensions of implementation quality, in a Socio-Emotional Learning after-school program using Educational Dance activities, Experiencing Emotions, and also to understand its influence on program outcomes. The sample involved 98 middle-school Portuguese pupils, 53 of whom participated in the program and 45 in after-school control sessions. Outcome measures included pre-test and post-test questionnaires of pupils' socio-emotional skills, well-being and school engagement. A self-report item measured pupils' satisfaction at the end of the program, and a checklist measuring attendance and homework completion was filled in by the facilitator at each session of the program and control condition. Results revealed (1) high levels of pupils' satisfaction and attendance, and a medium-high level of homework completion towards the program; (2) that pupils' higher attendance rate in the program predicted higher results in the self-management (p = .04, d = .57; p = .003, d = .87) and social awareness (p = .04, d = .59) SEL domains, emotional (p = .02, d = .67) and psychological (p = .009, d = .76) well-being and school engagement (p = .04, d = .56); (3) that pupils' higher rate of homework completion in the program predicted higher results in the relationship skills SEL area (p = .04, d = .59) and in school engagement (p = .005, d = 1.50); (4) that pupils' from the control condition higher rates of homework completion also predicted better school engagement (p = .006, d = .88). Implications for research and practice are discussed.
Kinnear, Frances B; Fulbrook, Paul
2017-01-01
Aim To assess the utility of a multiple-encounter in-situ (MEIS) simulation as an orientation tool for multidisciplinary staff prior to opening a new paediatric emergency service. Methods A single-group pretest/post-test study was conducted. During the MEIS simulation, multidisciplinary staff with participant or observer roles managed eight children (mannequins) who attended triage with their parent/guardians (clinical facilitators) for a range of emergency presentations (structured scenarios designed to represent the expected range of presentations plus test various clinical pathways/systems). Participants were debriefed to explore clinical, systems and crisis-resource management issues. Participants also completed a pre-intervention and post-intervention questionnaire comprising statements about role confidence and orientation adequacy. Pre-test and post-test results were analysed using t-test and Wilcoxon signed rank test. Results Eighty-nine staff participated in the MEIS simulation, with the majority completing the pre-simulation and post-simulation questionnaire. There was a significant improvement in post-intervention versus pre-intervention Likert scores for role confidence and orientation adequacy (p=0.001 and <0.001, respectively); effect sizes suggested the greatest impact was on orientation adequacy. Nearly all scenarios resulted in significant increases in participants’ confidence levels. Conclusions The MEIS simulation was of utility in orientation of staff, at least with respect to self-reported role confidence and orientation adequacy. Its effectiveness in practice or compared with other orientation techniques was not assessed, but it did identify several flaws in planned systems allowing remediation prior to opening. PMID:29354279
Shake Test Results and Dynamic Calibration Efforts for the Large Rotor Test Apparatus
NASA Technical Reports Server (NTRS)
Russell, Carl R.
2014-01-01
Prior to the full-scale wind tunnel test of the UH-60A Airloads rotor, a shake test was completed on the Large Rotor Test Apparatus. The goal of the shake test was to characterize the oscillatory response of the test rig and provide a dynamic calibration of the balance to accurately measure vibratory hub loads. This paper provides a summary of the shake test results, including balance, shaft bending gauge, and accelerometer measurements. Sensitivity to hub mass and angle of attack were investigated during the shake test. Hub mass was found to have an important impact on the vibratory forces and moments measured at the balance, especially near the UH-60A 4/rev frequency. Comparisons were made between the accelerometer data and an existing finite-element model, showing agreement on mode shapes, but not on natural frequencies. Finally, the results of a simple dynamic calibration are presented, showing the effects of changes in hub mass. The results show that the shake test data can be used to correct in-plane loads measurements up to 10 Hz and normal loads up to 30 Hz.
NASA Technical Reports Server (NTRS)
1982-01-01
Information on the Japanese National Aerospace Laboratory two dimensional transonic wind tunnel, completed at the end of 1979 is presented. Its construction is discussed in detail, and the wind tunnel structure, operation, test results, and future plans are presented.
47 CFR 15.32 - Test procedures for CPU boards and computer power supplies.
Code of Federal Regulations, 2011 CFR
2011-10-01
... result in a complete personal computer system. If the oscillator and the microprocessor circuits are... microprocessor circuits are contained on separate circuit boards, both boards, typical of the combination that...
47 CFR 15.32 - Test procedures for CPU boards and computer power supplies.
Code of Federal Regulations, 2013 CFR
2013-10-01
... result in a complete personal computer system. If the oscillator and the microprocessor circuits are... microprocessor circuits are contained on separate circuit boards, both boards, typical of the combination that...
47 CFR 15.32 - Test procedures for CPU boards and computer power supplies.
Code of Federal Regulations, 2014 CFR
2014-10-01
... result in a complete personal computer system. If the oscillator and the microprocessor circuits are... microprocessor circuits are contained on separate circuit boards, both boards, typical of the combination that...
47 CFR 15.32 - Test procedures for CPU boards and computer power supplies.
Code of Federal Regulations, 2012 CFR
2012-10-01
... result in a complete personal computer system. If the oscillator and the microprocessor circuits are... microprocessor circuits are contained on separate circuit boards, both boards, typical of the combination that...
47 CFR 15.32 - Test procedures for CPU boards and computer power supplies.
Code of Federal Regulations, 2010 CFR
2010-10-01
... result in a complete personal computer system. If the oscillator and the microprocessor circuits are... microprocessor circuits are contained on separate circuit boards, both boards, typical of the combination that...
Concentrating Solar Power Central Receiver Panel Component Fabrication and Testing FINAL REPORT
DOE Office of Scientific and Technical Information (OSTI.GOV)
McDowell, Michael W; Miner, Kris
The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then completemore » the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to test scale prototype receiver, off sun but at temperature, at a molten salt loop at ground level adjacent to the tower also had to be abandoned. Thus, no test facility existed for a molten salt receiver test. As a result, PWR completed the prototype receiver design and then fabricated key components for testing instead of fabricating the complete prototype receiver. A number of innovative design ideas have been developed. Key features of the receiver panel have been identified. This evaluation includes input from Solar 2, personal experience of people working on these programs and meetings with Sandia. Key components of the receiver design and key processes used to fabricate a receiver have been selected for further evaluation. The Test Plan, Concentrated Solar Power Receiver In Cooperation with the Department of Energy and Sandia National Laboratory was written to define the scope of the testing to be completed as well as to provide details related to the hardware, instrumentation, and data acquisition. The document contains a list of test objectives, a test matrix, and an associated test box showing the operating points to be tested. Test Objectives: 1. Demonstrate low-cost manufacturability 2. Demonstrate robustness of two different tube base materials 3. Collect temperature data during on sun operation 4. Demonstrate long term repeated daily operation of heat shields 5. Complete pinhole tube weld repairs 6. Anchor thermal models This report discusses the tests performed, the results, and implications for design improvements and LCOE reduction.« less
NASA Astrophysics Data System (ADS)
Näsilä, Antti; Holmlund, Christer; Mannila, Rami; Näkki, Ismo; Ojanen, Harri J.; Akujärvi, Altti; Saari, Heikki; Fussen, Didier; Pieroux, Didier; Demoulin, Philippe
2016-10-01
PICASSO - A PICo-satellite for Atmospheric and Space Science Observations is an ESA project led by the Belgian Institute for Space Aeronomy, in collaboration with VTT Technical Research Centre of Finland Ltd, Clyde Space Ltd. (UK) and Centre Spatial de Liège (BE). The test campaign for the engineering model of the PICASSO VISION instrument, a miniaturized nanosatellite spectral imager, has been successfully completed. The test results look very promising. The proto-flight model of VISION has also been successfully integrated and it is waiting for the final integration to the satellite platform.
High Temperature Electrolysis 4 kW Experiment Design, Operation, and Results
DOE Office of Scientific and Technical Information (OSTI.GOV)
J.E. O'Brien; X. Zhang; K. DeWall
2012-09-01
This report provides results of long-term stack testing completed in the new high-temperature steam electrolysis multi-kW test facility recently developed at INL. The report includes detailed descriptions of the piping layout, steam generation and delivery system, test fixture, heat recuperation system, hot zone, instrumentation, and operating conditions. This facility has provided a demonstration of high-temperature steam electrolysis operation at the 4 kW scale with advanced cell and stack technology. This successful large-scale demonstration of high-temperature steam electrolysis will help to advance the technology toward near-term commercialization.
Garoushi, Sabri; Johnson, Mark I; Tashani, Osama A
2017-12-01
In Libya neuropathic pain is rarely assessed in patients with diabetes. The Leeds Assessment of Neuropathic Symptoms and Signs (LANSS) pain scale is used worldwide to screen for neuropathic pain. There is no Arabic version of LANSS for use in Libya. The aim of this study was to develop an Arabic version of LANSS and to assess its validity and reliability in diabetic patients in Benghazi, Libya. LANSS was translated into Arabic by four bilingual translators and back translated to English by a university academic. Validity and reliability of the Arabic LANSS was assessed on 110 patients attending a Diabetes Centre in Benghazi. Concurrent validity was tested and compared with the Self-completed Leeds Assessment of Neuropathic Symptoms and Signs (S-LANSS). Test-retest reliability was conducted 1-2 weeks later. Internal consistency and inter-class correlation (ICC) between LANSS and S-LANSS was also tested. Internal consistency within first completion of the Arabic LANSS was acceptable (Cronbach's alpha = 0.793) and similar to the Arabic S-LANSS (0.796) and the second completion of the Arabic LANSS (0.795). ICC between the Arabic LANSS and the Arabic S-LANSS was 0.999 (p < 0.001). Test-retest reliability (ICC) between first and second completions of the Arabic LANSS was 0.999 (p < 0.001). Kappa measurement of agreement between the two Arabic LANSS completions and S-LANSS was high on all seven items (Kappa >0.95, p < 0.0001). We concluded that the Arabic version of LANSS pain scale was valid and reliable for use on Libyan diabetic patients. This study provided results suggesting that the S-LANSS could also be used on diabetic patients.
The clinical evaluation of infantile nystagmus: What to do first and why
Bertsch, Morgan; Floyd, Michael; Kehoe, Taylor; Pfeifer, Wanda; Drack, Arlene V.
2017-01-01
Introduction Infantile nystagmus has many causes, some life threatening. We determined the most common diagnoses in order to develop a testing algorithm. Methods Retrospective chart review. Exclusion criteria were no nystagmus, acquired after 6 months, or lack of examination. Data collected: pediatric eye examination findings, ancillary testing, order of testing, referral, and final diagnoses. Final diagnosis was defined as meeting published clinical criteria and/or confirmed by diagnostic testing. Patients with a diagnosis not meeting the definition were “unknown.” Patients with incomplete testing were “incomplete.” Patients with multiple plausible etiologies were “multifactorial.” Patients with negative complete workup were “motor.” Results 284 charts were identified; 202 met inclusion criteria. The 3 most common causes were Albinism(19%), Leber Congenital Amaurosis(LCA)(14%) and Non-LCA retinal dystrophy (13%). Anatomic retinal disorders comprised 10%, motor another 10%. The most common first test was MRI (74/202) with a diagnostic yield of 16%. For 28 MRI-first patients, nystagmus alone was the indication; for 46 MRI-first patients other neurologic signs were present. 0/28 nystagmus-only patients had a diagnostic MRI while 14/46 (30%) with neurologic signs did. Yield of ERG as first test was 56%, OCT 55%, and molecular genetic testing 47%. 90% of patients had an etiology identified. Conclusion The most common causes of infantile nystagmus were retinal disorders (56%), however the most common first test was brain MRI. For patients without other neurologic stigmata complete pediatric eye examination, ERG, OCT and molecular genetic testing had a higher yield than MRI scan. If MRI is not diagnostic, a complete ophthalmologic workup should be pursued. PMID:28177849
Commissioning and Testing the 1970's Era LASS Solenoid Magnet in JLab's Hall D
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ballard, Joshua T.; Biallas, George H.; Brown, G.
2015-06-01
JLab refurbished and reconfigured the LASS1, 1.85m bore Solenoid and installed it as the principal analysis magnet for nuclear physics in the newly constructed, Hall D at Jefferson Lab. The magnet contains four superconducting coils within an iron yoke. The magnet was built in the early1970's at Stanford Linear Accelerator Center and used a second time at Los Alamos National Laboratory. The coils were extensively refurbished and individually tested by JLab. A new Cryogenic Distribution Box provides cryogens and their control valving, current distribution bus, and instrumentation pass-through. A repurposed CTI 2800 refrigerator system and new transfer line complete themore » system. We describe the re-configuration, the process and problems of re-commissioning the magnet and the results of testing the completed magnet.« less
Repetition priming with Japanese Kana scripts in word-fragment completion.
Komatsu, S; Naito, M
1992-03-01
Manipulating two types of Japanese Kana script, Katakana and Hiragana, we examined the effects of a script change between study and test on later word-fragment completion. Throughout three experiments, materials were composed of foreign loan nouns normally written in Katakana, but not in Hiragana, according to approved usage in Japanese. Experiment 1 demonstrated the reliable size of cross-script priming between Katakana and Hiragana. In Experiment 2, cross-modal priming was substantial when modality of presentation was changed from auditory to visual. In Experiment 3, generating a target word from its definition induced priming comparable in size to that in the prior reading condition. These results have been confirmed in the Hiragana test, as well as in the Katakana test, thereby suggesting that some conceptual and modality-independent processes may also mediate repetition priming.
Promoting Best Practices for Managing Acute Low Back Pain in an Occupational Environment.
Slaughter, Amanda Lynn; Frith, Karen; O'Keefe, Louise; Alexander, Susan; Stoll, Regina
2015-09-01
Providers treating low back pain must be confident and knowledgeable in evidence-based practice (EBP) to provide the best outcomes. An online education course was created in an effort to increase knowledge and confidence in EBP and clinical practice guidelines specific to low back pain in an occupational setting. There were 80 participants who completed the pre-test and post-test. The results showed a statistically significant improvement in knowledge and confidence scores after completion of the course. An online education course was shown to be a cost-effective, accessible tool to increase knowledge and confidence of EBP for different health care providers. © 2015 The Author(s).
Qadri, S M; Johnson, S; Smith, J C; Zubairi, S; Gillum, R L
1981-01-01
The ability of several anaerobic bacteria to hydrolyze esculin to esculetin is used by clinical microbiologists and taxonomists in the differentiation and identification of both gram-positive and gram-negative microorganisms. Conventional methods used for determining esculin hydrolysis by anaerobic bacteria require 24 to 48 h for completion. In this paper we evaluate two procedures which yield rapid results. A total of 738 anaerobic bacteria were used in this study. A total of 99% of the esculin-hydrolyzing anaerobic bacteria gave positive results with the spot test in 1 h, whereas the other test method, the PathoTec strip test (General Diagnostics, Morris Plains, N.J.), required 4 h for 96% of the strains tested to yield positive reactions. Both tests showed a 100% specificity when compared with the standard broth test and are easy to perform, accurate, and economical. The spot test is superior to the PathoTec strip test in yielding results more rapidly. PMID:7016896
Uprated OMS Engine Status-Sea Level Testing Results
NASA Technical Reports Server (NTRS)
Bertolino, J. D.; Boyd, W. C.
1990-01-01
The current Space Shuttle Orbital Maneuvering Engine (OME) is pressure fed, utilizing storable propellants. Performance uprating of this engine, through the use of a gas generator driven turbopump to increase operating pressure, is being pursued by the NASA Johnson Space Center (JSC). Component level design, fabrication, and test activities for this engine system have been on-going since 1984. More recently, a complete engine designated the Integrated Component Test Bed (ICTB), was tested at sea level conditions by Aerojet. A description of the test hardware and results of the sea level test program are presented. These results, which include the test condition operating envelope and projected performance at altitude conditions, confirm the capability of the selected Uprated OME (UOME) configuration to meet or exceed performance and operational requirements. Engine flexibility, demonstrated through testing at two different operational mixture ratios, along with a summary of projected Space Shuttle performance enhancements using the UOME, are discussed. Planned future activities, including ICTB tests at simulated altitude conditions, and recommendations for further engine development, are also discussed.