Accounting for selection bias in association studies with complex survey data.

PubMed

Wirth, Kathleen E; Tchetgen Tchetgen, Eric J

2014-05-01

Obtaining representative information from hidden and hard-to-reach populations is fundamental to describe the epidemiology of many sexually transmitted diseases, including HIV. Unfortunately, simple random sampling is impractical in these settings, as no registry of names exists from which to sample the population at random. However, complex sampling designs can be used, as members of these populations tend to congregate at known locations, which can be enumerated and sampled at random. For example, female sex workers may be found at brothels and street corners, whereas injection drug users often come together at shooting galleries. Despite the logistical appeal, complex sampling schemes lead to unequal probabilities of selection, and failure to account for this differential selection can result in biased estimates of population averages and relative risks. However, standard techniques to account for selection can lead to substantial losses in efficiency. Consequently, researchers implement a variety of strategies in an effort to balance validity and efficiency. Some researchers fully or partially account for the survey design, whereas others do nothing and treat the sample as a realization of the population of interest. We use directed acyclic graphs to show how certain survey sampling designs, combined with subject-matter considerations unique to individual exposure-outcome associations, can induce selection bias. Finally, we present a novel yet simple maximum likelihood approach for analyzing complex survey data; this approach optimizes statistical efficiency at no cost to validity. We use simulated data to illustrate this method and compare it with other analytic techniques.

How Instructional Designers Solve Workplace Problems

ERIC Educational Resources Information Center

Fortney, Kathleen S.; Yamagata-Lynch, Lisa C.

2013-01-01

This naturalistic inquiry investigated how instructional designers engage in complex and ambiguous problem solving across organizational boundaries in two corporations. Participants represented a range of instructional design experience, from novices to experts. Research methods included a participant background survey, observations of…

A survey of design methods for failure detection in dynamic systems

NASA Technical Reports Server (NTRS)

Willsky, A. S.

1975-01-01

A number of methods for the detection of abrupt changes (such as failures) in stochastic dynamical systems were surveyed. The class of linear systems were emphasized, but the basic concepts, if not the detailed analyses, carry over to other classes of systems. The methods surveyed range from the design of specific failure-sensitive filters, to the use of statistical tests on filter innovations, to the development of jump process formulations. Tradeoffs in complexity versus performance are discussed.

Investigation of design considerations for a complex demodulation filter

NASA Technical Reports Server (NTRS)

Stoughton, J. W.

1984-01-01

The digital design of an adaptive digital filter to be employed in the processing of microwave remote sensor data was developed. In particular, a complex demodulation approach was developed to provide narrow band power estimation for a proposed Doppler scatterometer system. This scatterometer was considered for application in the proposed National Oceanographic survey satellite, on an improvement of SEASAT features. A generalized analysis of complex diagrams for the digital architecture component of the proposed system.

[Methodological design for the National Survey Violence Against Women in Mexico].

PubMed

Olaiz, Gustavo; Franco, Aurora; Palma, Oswaldo; Echarri, Carlos; Valdez, Rosario; Herrera, Cristina

2006-01-01

To describe the methodology, the research designs used, the estimation and sample selection, variable definitions, collection instruments, and operative design and analytical procedures for the National Survey Violence Against Women in Mexico. A complex (two-step) cross-sectional study was designed and the qualitative design was carried out using in-depth interviews and participant observation in health care units. We obtained for the quantitative study a total of 26 240 interviews in women users of health services and 2 636 questionnaires for health workers; the survey is representative of the 32 Mexican states. For the qualitative study 26 in-depth interviews were conducted with female users and 60 interviews with health workers in the States of Quintana Roo, Coahuila and the Federal District.

Cardiorespiratory Fitness Levels among U.S. Youth Aged 12-15 Years: United States, 1999-2004 and 2012

MedlinePlus

... use a complex, stratified, multistage probability cluster sampling design. NHANES data collection is based on a nationally ... conjunction with the 2012 NHANES and the survey design was based on the design for NHANES, with ...

ESTIMATING PROPORTION OF AREA OCCUPIED UNDER COMPLEX SURVEY DESIGNS

EPA Science Inventory

Estimating proportion of sites occupied, or proportion of area occupied (PAO) is a common problem in environmental studies. Typically, field surveys do not ensure that occupancy of a site is made with perfect detection. Maximum likelihood estimation of site occupancy rates when...

Marriage, Cohabitation, and Men's Use of Preventive Health Care Services

MedlinePlus

... N.C.) to account for the complex sample design of NHIS. All estimates shown in this report ... Parsons VL, Moriarity C, Jonas K, et al. Design and estimation for the National Health Interview Survey, ...

Survey of European Programs: Education for Urbanization in the Developing Countries. An International Urbanization Survey Report to the Ford Foundation.

ERIC Educational Resources Information Center

Bernstein, Beverly

This report is intended as a contribution to the International Urbanization Survey, initiated by The Ford Foundation. The Survey is designed to review and assess experience in the complex problems posed by the rapid growth of urban centres throughout the developing countries. The terms of reference used here were broadly taken to be as follows: to…

Canadian Health Measures Survey pre-test: design, methods, results.

PubMed

Tremblay, Mark; Langlois, Renée; Bryan, Shirley; Esliger, Dale; Patterson, Julienne

2007-01-01

The Canadian Health Measures Survey (CHMS) pre-test was conducted to provide information about the challenges and costs associated with administering a physical health measures survey in Canada. To achieve the specific objectives of the pre-test, protocols were developed and tested, and methods for household interviewing and clinic testing were designed and revised. The cost, logistics and suitability of using fixed sites for the CHMS were assessed. Although data collection, transfer and storage procedures are complex, the pre-test experience confirmed Statistics Canada's ability to conduct a direct health measures survey and the willingness of Canadians to participate in such a health survey. Many operational and logistical procedures worked well and, with minor modifications, are being employed in the main survey. Fixed sites were problematic, and survey costs were higher than expected.

Rural Residents Who Are Hospitalized in Rural and Urban Hospitals: United States, 2010

MedlinePlus

... once in NHDS. Because of the complex multistage design of NHDS, the survey data must be inflated ... this report exclude newborns. More details about the design of NHDS have been published elsewhere ( 14 ). Differences ...

Evaluation of Colorado Learning Attitudes about Science Survey

ERIC Educational Resources Information Center

Douglas, K. A.; Yale, M. S.; Bennett, D. E.; Haugan, M. P.; Bryan, L. A.

2014-01-01

The Colorado Learning Attitudes about Science Survey (CLASS) is a widely used instrument designed to measure student attitudes toward physics and learning physics. Previous research revealed a fairly complex factor structure. In this study, exploratory and confirmatory factor analyses were conducted on data from an undergraduate introductory…

Estimating population trends with a linear model: Technical comments

USGS Publications Warehouse

Sauer, John R.; Link, William A.; Royle, J. Andrew

2004-01-01

Controversy has sometimes arisen over whether there is a need to accommodate the limitations of survey design in estimating population change from the count data collected in bird surveys. Analyses of surveys such as the North American Breeding Bird Survey (BBS) can be quite complex; it is natural to ask if the complexity is necessary, or whether the statisticians have run amok. Bart et al. (2003) propose a very simple analysis involving nothing more complicated than simple linear regression, and contrast their approach with model-based procedures. We review the assumptions implicit to their proposed method, and document that these assumptions are unlikely to be valid for surveys such as the BBS. One fundamental limitation of a purely design-based approach is the absence of controls for factors that influence detection of birds at survey sites. We show that failure to model observer effects in survey data leads to substantial bias in estimation of population trends from BBS data for the 20 species that Bart et al. (2003) used as the basis of their simulations. Finally, we note that the simulations presented in Bart et al. (2003) do not provide a useful evaluation of their proposed method, nor do they provide a valid comparison to the estimating- equations alternative they consider.

76 FR 23608 - Revision to Proposed Collection; Comment Request; Formative Research Methodology Studies for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... conduct survey and instrument design and administration, focus groups, cognitive interviews, and health..., recruitment, consent and questionnaire design, and retention activities. Under separate notice, the NCS also... study of this size and complexity, the NCS was designed to include a preliminary pilot study known as...

76 FR 23605 - New Proposed Collection; Comment Request; Study Logistic Formative Research Methodology Studies...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... formative research relating to instrument design and modality with a view to reduce item and unit non... clearance to conduct survey and instrument design and administration, focus groups, cognitive interviews... conduct the detailed preparation needed for a study of this size and complexity, the NCS was designed to...

Application of 3D Laser Scanning Technology in Complex Rock Foundation Design

NASA Astrophysics Data System (ADS)

Junjie, Ma; Dan, Lu; Zhilong, Liu

2017-12-01

Taking the complex landform of Tanxi Mountain Landscape Bridge as an example, the application of 3D laser scanning technology in the mapping of complex rock foundations is studied in this paper. A set of 3D laser scanning technologies are formed and several key engineering problems are solved. The first is 3D laser scanning technology of complex landforms. 3D laser scanning technology is used to obtain a complete 3D point cloud data model of the complex landform. The detailed and accurate results of the surveying and mapping decrease the measuring time and supplementary measuring times. The second is 3D collaborative modeling of the complex landform. A 3D model of the complex landform is established based on the 3D point cloud data model. The super-structural foundation model is introduced for 3D collaborative design. The optimal design plan is selected and the construction progress is accelerated. And the last is finite-element analysis technology of the complex landform foundation. A 3D model of the complex landform is introduced into ANSYS for building a finite element model to calculate anti-slide stability of the rock, and provides a basis for the landform foundation design and construction.

Organizational Influences on Interdisciplinary Interactions during Research and Design of Large-Scale Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria R.; Seifert, Colleen M.; Papalambros, Panos Y.

2012-01-01

The design of large-scale complex engineered systems (LaCES) such as an aircraft is inherently interdisciplinary. Multiple engineering disciplines, drawing from a team of hundreds to thousands of engineers and scientists, are woven together throughout the research, development, and systems engineering processes to realize one system. Though research and development (R&D) is typically focused in single disciplines, the interdependencies involved in LaCES require interdisciplinary R&D efforts. This study investigates the interdisciplinary interactions that take place during the R&D and early conceptual design phases in the design of LaCES. Our theoretical framework is informed by both engineering practices and social science research on complex organizations. This paper provides preliminary perspective on some of the organizational influences on interdisciplinary interactions based on organization theory (specifically sensemaking), data from a survey of LaCES experts, and the authors experience in the research and design. The analysis reveals couplings between the engineered system and the organization that creates it. Survey respondents noted the importance of interdisciplinary interactions and their significant benefit to the engineered system, such as innovation and problem mitigation. Substantial obstacles to interdisciplinarity are uncovered beyond engineering that include communication and organizational challenges. Addressing these challenges may ultimately foster greater efficiencies in the design and development of LaCES and improved system performance by assisting with the collective integration of interdependent knowledge bases early in the R&D effort. This research suggests that organizational and human dynamics heavily influence and even constrain the engineering effort for large-scale complex systems.

Design Thinking in Integrated STEAM Learning: Surveying the Landscape and Exploring Exemplars in Elementary Grades

ERIC Educational Resources Information Center

Cook, Kristin L.; Bush, Sarah B.

2018-01-01

Complementing the aims of problem-based inquiry, a pedagogical approach called design thinking (DT) has students grapple with issues that require a creative redefinition and reimagining of solutions akin to professional skills of designers, who consider conflicting priorities and complex negotiations to arrive at a solution to an ill-defined…

Multi-country health surveys: are the analyses misleading?

PubMed

Masood, Mohd; Reidpath, Daniel D

2014-05-01

The aim of this paper was to review the types of approaches currently utilized in the analysis of multi-country survey data, specifically focusing on design and modeling issues with a focus on analyses of significant multi-country surveys published in 2010. A systematic search strategy was used to identify the 10 multi-country surveys and the articles published from them in 2010. The surveys were selected to reflect diverse topics and foci; and provide an insight into analytic approaches across research themes. The search identified 159 articles appropriate for full text review and data extraction. The analyses adopted in the multi-country surveys can be broadly classified as: univariate/bivariate analyses, and multivariate/multivariable analyses. Multivariate/multivariable analyses may be further divided into design- and model-based analyses. Of the 159 articles reviewed, 129 articles used model-based analysis, 30 articles used design-based analyses. Similar patterns could be seen in all the individual surveys. While there is general agreement among survey statisticians that complex surveys are most appropriately analyzed using design-based analyses, most researchers continued to use the more common model-based approaches. Recent developments in design-based multi-level analysis may be one approach to include all the survey design characteristics. This is a relatively new area, however, and there remains statistical, as well as applied analytic research required. An important limitation of this study relates to the selection of the surveys used and the choice of year for the analysis, i.e., year 2010 only. There is, however, no strong reason to believe that analytic strategies have changed radically in the past few years, and 2010 provides a credible snapshot of current practice.

Guidelines for a Training Course in Noise Survey Techniques.

ERIC Educational Resources Information Center

Shadley, John; And Others

The course is designed to train noise survey technicians during a 3-5 day period to make reliable measurements of 75 percent of the noise problems encountered in the community. The more complex noise problems remaining will continue to be handled by experienced specialists. These technicians will be trained to assist State and local governments in…

Design and Implementation Issues in Surveying the Views of Young Children in Ethnolinguistically Diverse Developing Country Contexts

ERIC Educational Resources Information Center

Smith, Hilary A.; Haslett, Stephen J.

2016-01-01

This paper discusses issues in the development of a methodology appropriate for eliciting sound quantitative data from primary school children in the complex contexts of ethnolinguistically diverse developing countries. Although these issues often occur in field-based surveys, the large extent and compound effects of their occurrence in…

10 CFR 455.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... building and any installation therein which are designed to reduce the energy consumption in such building... commercial source of energy used within the building or complex being surveyed such as natural gas, fuel oil... device or devices which are designed to shift energy use to hours of low demand in order to reduce energy...

10 CFR 455.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... building and any installation therein which are designed to reduce the energy consumption in such building... commercial source of energy used within the building or complex being surveyed such as natural gas, fuel oil... device or devices which are designed to shift energy use to hours of low demand in order to reduce energy...

10 CFR 455.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... building and any installation therein which are designed to reduce the energy consumption in such building... commercial source of energy used within the building or complex being surveyed such as natural gas, fuel oil... device or devices which are designed to shift energy use to hours of low demand in order to reduce energy...

Methods of estimating or accounting for neighborhood associations with health using complex survey data.

PubMed

Brumback, Babette A; Cai, Zhuangyu; Dailey, Amy B

2014-05-15

Reasons for health disparities may include neighborhood-level factors, such as availability of health services, social norms, and environmental determinants, as well as individual-level factors. Investigating health inequalities using nationally or locally representative data often requires an approach that can accommodate a complex sampling design, in which individuals have unequal probabilities of selection into the study. The goal of the present article is to review and compare methods of estimating or accounting for neighborhood influences with complex survey data. We considered 3 types of methods, each generalized for use with complex survey data: ordinary regression, conditional likelihood regression, and generalized linear mixed-model regression. The relative strengths and weaknesses of each method differ from one study to another; we provide an overview of the advantages and disadvantages of each method theoretically, in terms of the nature of the estimable associations and the plausibility of the assumptions required for validity, and also practically, via a simulation study and 2 epidemiologic data analyses. The first analysis addresses determinants of repeat mammography screening use using data from the 2005 National Health Interview Survey. The second analysis addresses disparities in preventive oral health care using data from the 2008 Florida Behavioral Risk Factor Surveillance System Survey.

Using Systems Theory to Examine Patient and Nurse Structures, Processes, and Outcomes in Centralized and Decentralized Units.

PubMed

Real, Kevin; Fay, Lindsey; Isaacs, Kathy; Carll-White, Allison; Schadler, Aric

2018-01-01

This study utilizes systems theory to understand how changes to physical design structures impact communication processes and patient and staff design-related outcomes. Many scholars and researchers have noted the importance of communication and teamwork for patient care quality. Few studies have examined changes to nursing station design within a systems theory framework. This study employed a multimethod, before-and-after, quasi-experimental research design. Nurses completed surveys in centralized units and later in decentralized units ( N = 26 pre , N = 51 post ). Patients completed surveys ( N = 62 pre ) in centralized units and later in decentralized units ( N = 49 post ). Surveys included quantitative measures and qualitative open-ended responses. Patients preferred the decentralized units because of larger single-occupancy rooms, greater privacy/confidentiality, and overall satisfaction with design. Nurses had a more complex response. Nurses approved the patient rooms, unit environment, and noise levels in decentralized units. However, they reported reduced access to support spaces, lower levels of team/mentoring communication, and less satisfaction with design than in centralized units. Qualitative findings supported these results. Nurses were more positive about centralized units and patients were more positive toward decentralized units. The results of this study suggest a need to understand how system components operate in concert. A major contribution of this study is the inclusion of patient satisfaction with design, an important yet overlooked fact in patient satisfaction. Healthcare design researchers and practitioners may consider how changing system interdependencies can lead to unexpected changes to communication processes and system outcomes in complex systems.

Horvitz-Thompson survey sample methods for estimating large-scale animal abundance

USGS Publications Warehouse

Samuel, M.D.; Garton, E.O.

1994-01-01

Large-scale surveys to estimate animal abundance can be useful for monitoring population status and trends, for measuring responses to management or environmental alterations, and for testing ecological hypotheses about abundance. However, large-scale surveys may be expensive and logistically complex. To ensure resources are not wasted on unattainable targets, the goals and uses of each survey should be specified carefully and alternative methods for addressing these objectives always should be considered. During survey design, the impoflance of each survey error component (spatial design, propofiion of detected animals, precision in detection) should be considered carefully to produce a complete statistically based survey. Failure to address these three survey components may produce population estimates that are inaccurate (biased low), have unrealistic precision (too precise) and do not satisfactorily meet the survey objectives. Optimum survey design requires trade-offs in these sources of error relative to the costs of sampling plots and detecting animals on plots, considerations that are specific to the spatial logistics and survey methods. The Horvitz-Thompson estimators provide a comprehensive framework for considering all three survey components during the design and analysis of large-scale wildlife surveys. Problems of spatial and temporal (especially survey to survey) heterogeneity in detection probabilities have received little consideration, but failure to account for heterogeneity produces biased population estimates. The goal of producing unbiased population estimates is in conflict with the increased variation from heterogeneous detection in the population estimate. One solution to this conflict is to use an MSE-based approach to achieve a balance between bias reduction and increased variation. Further research is needed to develop methods that address spatial heterogeneity in detection, evaluate the effects of temporal heterogeneity on survey objectives and optimize decisions related to survey bias and variance. Finally, managers and researchers involved in the survey design process must realize that obtaining the best survey results requires an interactive and recursive process of survey design, execution, analysis and redesign. Survey refinements will be possible as further knowledge is gained on the actual abundance and distribution of the population and on the most efficient techniques for detection animals.

Modeling the Stress Complexities of Teaching and Learning of School Physics in Nigeria

ERIC Educational Resources Information Center

Emetere, Moses E.

2014-01-01

This study was designed to investigate the validity of the stress complexity model (SCM) to teaching and learning of school physics in Abuja municipal area council of Abuja, North. About two hundred students were randomly selected by a simple random sampling technique from some schools within the Abuja municipal area council. A survey research…

Generalizing Observational Study Results: Applying Propensity Score Methods to Complex Surveys

PubMed Central

DuGoff, Eva H; Schuler, Megan; Stuart, Elizabeth A

2014-01-01

ObjectiveTo provide a tutorial for using propensity score methods with complex survey data. Data SourcesSimulated data and the 2008 Medical Expenditure Panel Survey. Study DesignUsing simulation, we compared the following methods for estimating the treatment effect: a naïve estimate (ignoring both survey weights and propensity scores), survey weighting, propensity score methods (nearest neighbor matching, weighting, and subclassification), and propensity score methods in combination with survey weighting. Methods are compared in terms of bias and 95 percent confidence interval coverage. In Example 2, we used these methods to estimate the effect on health care spending of having a generalist versus a specialist as a usual source of care. Principal FindingsIn general, combining a propensity score method and survey weighting is necessary to achieve unbiased treatment effect estimates that are generalizable to the original survey target population. ConclusionsPropensity score methods are an essential tool for addressing confounding in observational studies. Ignoring survey weights may lead to results that are not generalizable to the survey target population. This paper clarifies the appropriate inferences for different propensity score methods and suggests guidelines for selecting an appropriate propensity score method based on a researcher’s goal. PMID:23855598

Hand controllers for teleoperation. A state-of-the-art technology survey and evaluation

NASA Technical Reports Server (NTRS)

Brooks, T. L.; Bejczy, A. K.

1985-01-01

Hand controller technology for teleoperation is surveyed in three major catagories: (1) hand grip design, (2) control input devices, and (3) control strategies. In the first category, 14 hand grip designs are reviewed and evaluated in light of human factor considerations. In the second, 12 hand controller input devices are evaluated in terms of task performance, configuration and force feedback, controller/slave correspondence, operating volume, operator workload, human limitations, cross coupling, singularities, anthropomorphic characteristics, physical complexity, control/display interference, accuracy, technological base, cost, and reliability. In the third catagory, control strategies, commonly called control modes, are surveyed and evaluated. The report contains a bibliography with 189 select references on hand controller technology.

76 FR 23603 - New Proposed Collection; Comment Request; Environmental Science Formative Research Methodology...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... generic clearance to conduct survey and instrument design and administration, focus groups, cognitive... study of this size and complexity, the NCS was designed to include a preliminary pilot study known as... the Main Study. At every phase of the NCS, the multiple methodological studies conducted during the...

76 FR 23609 - New Proposed Collection; Comment Request; Biospecimen and Physical Measures Formative Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... has obtained an OMB generic clearance to conduct survey and instrument design and administration... conduct the detailed preparation needed for a study of this size and complexity, the NCS was designed to... methodological studies conducted during the Vanguard phase will inform the implementation and analysis plan for...

Healthcare professional and patient codesign and validation of a mechanism for service users to feedback patient safety experiences following a care transfer: a qualitative study

PubMed Central

Scott, Jason; Heavey, Emily; Waring, Justin; Jones, Diana; Dawson, Pamela

2016-01-01

Objective To develop and validate a mechanism for patients to provide feedback on safety experiences following a care transfer between organisations. Design Qualitative study using participatory methods (codesign workshops) and cognitive interviews. Workshop data were analysed concurrently with participants, and cognitive interviews were thematically analysed using a deductive approach based on the developed feedback mechanism. Participants Expert patients (n=5) and healthcare professionals (n=11) were recruited purposively to develop the feedback mechanism in 2 workshops. Workshop 1 explored principles underpinning safety feedback mechanisms, and workshop 2 included the practical development of the feedback mechanism. Final design and content of the feedback mechanism (a safety survey) were verified by workshop participants, and cognitive interviews (n=28) were conducted with patients. Results Workshop participants identified that safety feedback mechanisms should be patient-centred, short and concise with clear signposting on how to complete, with an option to be anonymous and balanced between positive (safe) and negative (unsafe) experiences. The agreed feedback mechanism consisted of a survey split across 3 stages of the care transfer: departure, journey and arrival. Care across organisational boundaries was recognised as being complex, with healthcare professionals acknowledging the difficulty implementing changes that impact other organisations. Cognitive interview participants agreed the content of the survey was relevant but identified barriers to completion relating to the survey formatting and understanding of a care transfer. Conclusions Participatory, codesign principles helped overcome differences in understandings of safety in the complex setting of care transfers when developing a safety survey. Practical barriers to the survey's usability and acceptability to patients were identified, resulting in a modified survey design. Further research is required to determine the usability and acceptability of the survey to patients and healthcare professionals, as well as identifying how governance structures should accommodate patient feedback when relating to multiple health or social care providers. PMID:27406641

An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals.

PubMed

Parsons, Nick R; Price, Charlotte L; Hiskens, Richard; Achten, Juul; Costa, Matthew L

2012-04-25

The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10-26%) of the studies investigated the conclusions were not clearly justified by the results, in 39% (30-49%) of studies a different analysis should have been undertaken and in 17% (10-26%) a different analysis could have made a difference to the overall conclusions. It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.

Promoting Post-Formal Thinking in a U.S. History Survey Course: A Problem-Based Approach

ERIC Educational Resources Information Center

Wynn, Charles T.; Mosholder, Richard S.; Larsen, Carolee A.

2016-01-01

This article presents a problem-based learning (PBL) model for teaching a college U.S. history survey course (U.S. history since 1890) designed to promote postformal thinking skills and identify and explain thinking systems inherent in adult complex problem-solving. We also present the results of a study in which the outcomes of the PBL model were…

Grouping methods for estimating the prevalences of rare traits from complex survey data that preserve confidentiality of respondents.

PubMed

Hyun, Noorie; Gastwirth, Joseph L; Graubard, Barry I

2018-03-26

Originally, 2-stage group testing was developed for efficiently screening individuals for a disease. In response to the HIV/AIDS epidemic, 1-stage group testing was adopted for estimating prevalences of a single or multiple traits from testing groups of size q, so individuals were not tested. This paper extends the methodology of 1-stage group testing to surveys with sample weighted complex multistage-cluster designs. Sample weighted-generalized estimating equations are used to estimate the prevalences of categorical traits while accounting for the error rates inherent in the tests. Two difficulties arise when using group testing in complex samples: (1) How does one weight the results of the test on each group as the sample weights will differ among observations in the same group. Furthermore, if the sample weights are related to positivity of the diagnostic test, then group-level weighting is needed to reduce bias in the prevalence estimation; (2) How does one form groups that will allow accurate estimation of the standard errors of prevalence estimates under multistage-cluster sampling allowing for intracluster correlation of the test results. We study 5 different grouping methods to address the weighting and cluster sampling aspects of complex designed samples. Finite sample properties of the estimators of prevalences, variances, and confidence interval coverage for these grouping methods are studied using simulations. National Health and Nutrition Examination Survey data are used to illustrate the methods. Copyright © 2018 John Wiley & Sons, Ltd.

How Big of a Problem is Analytic Error in Secondary Analyses of Survey Data?

PubMed

West, Brady T; Sakshaug, Joseph W; Aurelien, Guy Alain S

2016-01-01

Secondary analyses of survey data collected from large probability samples of persons or establishments further scientific progress in many fields. The complex design features of these samples improve data collection efficiency, but also require analysts to account for these features when conducting analysis. Unfortunately, many secondary analysts from fields outside of statistics, biostatistics, and survey methodology do not have adequate training in this area, and as a result may apply incorrect statistical methods when analyzing these survey data sets. This in turn could lead to the publication of incorrect inferences based on the survey data that effectively negate the resources dedicated to these surveys. In this article, we build on the results of a preliminary meta-analysis of 100 peer-reviewed journal articles presenting analyses of data from a variety of national health surveys, which suggested that analytic errors may be extremely prevalent in these types of investigations. We first perform a meta-analysis of a stratified random sample of 145 additional research products analyzing survey data from the Scientists and Engineers Statistical Data System (SESTAT), which describes features of the U.S. Science and Engineering workforce, and examine trends in the prevalence of analytic error across the decades used to stratify the sample. We once again find that analytic errors appear to be quite prevalent in these studies. Next, we present several example analyses of real SESTAT data, and demonstrate that a failure to perform these analyses correctly can result in substantially biased estimates with standard errors that do not adequately reflect complex sample design features. Collectively, the results of this investigation suggest that reviewers of this type of research need to pay much closer attention to the analytic methods employed by researchers attempting to publish or present secondary analyses of survey data.

How Big of a Problem is Analytic Error in Secondary Analyses of Survey Data?

PubMed Central

West, Brady T.; Sakshaug, Joseph W.; Aurelien, Guy Alain S.

2016-01-01

Secondary analyses of survey data collected from large probability samples of persons or establishments further scientific progress in many fields. The complex design features of these samples improve data collection efficiency, but also require analysts to account for these features when conducting analysis. Unfortunately, many secondary analysts from fields outside of statistics, biostatistics, and survey methodology do not have adequate training in this area, and as a result may apply incorrect statistical methods when analyzing these survey data sets. This in turn could lead to the publication of incorrect inferences based on the survey data that effectively negate the resources dedicated to these surveys. In this article, we build on the results of a preliminary meta-analysis of 100 peer-reviewed journal articles presenting analyses of data from a variety of national health surveys, which suggested that analytic errors may be extremely prevalent in these types of investigations. We first perform a meta-analysis of a stratified random sample of 145 additional research products analyzing survey data from the Scientists and Engineers Statistical Data System (SESTAT), which describes features of the U.S. Science and Engineering workforce, and examine trends in the prevalence of analytic error across the decades used to stratify the sample. We once again find that analytic errors appear to be quite prevalent in these studies. Next, we present several example analyses of real SESTAT data, and demonstrate that a failure to perform these analyses correctly can result in substantially biased estimates with standard errors that do not adequately reflect complex sample design features. Collectively, the results of this investigation suggest that reviewers of this type of research need to pay much closer attention to the analytic methods employed by researchers attempting to publish or present secondary analyses of survey data. PMID:27355817

Mars Rover Concept Vehicle

NASA Image and Video Library

2017-06-05

Crowds gather around the scientifically-themed Mars rover concept vehicle at the Kennedy Space Center Visitor Complex. It is a part of the "Summer of Mars" program designed to provide a survey of NASA's studies of the Red Planet. The builders of the rover, Parker Brothers Concepts of Port Canaveral, Florida, incorporated input into its design from NASA subject matter experts.

Model-based inference for small area estimation with sampling weights

PubMed Central

Vandendijck, Y.; Faes, C.; Kirby, R.S.; Lawson, A.; Hens, N.

2017-01-01

Obtaining reliable estimates about health outcomes for areas or domains where only few to no samples are available is the goal of small area estimation (SAE). Often, we rely on health surveys to obtain information about health outcomes. Such surveys are often characterised by a complex design, stratification, and unequal sampling weights as common features. Hierarchical Bayesian models are well recognised in SAE as a spatial smoothing method, but often ignore the sampling weights that reflect the complex sampling design. In this paper, we focus on data obtained from a health survey where the sampling weights of the sampled individuals are the only information available about the design. We develop a predictive model-based approach to estimate the prevalence of a binary outcome for both the sampled and non-sampled individuals, using hierarchical Bayesian models that take into account the sampling weights. A simulation study is carried out to compare the performance of our proposed method with other established methods. The results indicate that our proposed method achieves great reductions in mean squared error when compared with standard approaches. It performs equally well or better when compared with more elaborate methods when there is a relationship between the responses and the sampling weights. The proposed method is applied to estimate asthma prevalence across districts. PMID:28989860

A survey of decision tree classifier methodology

NASA Technical Reports Server (NTRS)

Safavian, S. R.; Landgrebe, David

1991-01-01

Decision tree classifiers (DTCs) are used successfully in many diverse areas such as radar signal classification, character recognition, remote sensing, medical diagnosis, expert systems, and speech recognition. Perhaps the most important feature of DTCs is their capability to break down a complex decision-making process into a collection of simpler decisions, thus providing a solution which is often easier to interpret. A survey of current methods is presented for DTC designs and the various existing issues. After considering potential advantages of DTCs over single-state classifiers, subjects of tree structure design, feature selection at each internal node, and decision and search strategies are discussed.

A survey of decision tree classifier methodology

NASA Technical Reports Server (NTRS)

Safavian, S. Rasoul; Landgrebe, David

1990-01-01

Decision Tree Classifiers (DTC's) are used successfully in many diverse areas such as radar signal classification, character recognition, remote sensing, medical diagnosis, expert systems, and speech recognition. Perhaps, the most important feature of DTC's is their capability to break down a complex decision-making process into a collection of simpler decisions, thus providing a solution which is often easier to interpret. A survey of current methods is presented for DTC designs and the various existing issue. After considering potential advantages of DTC's over single stage classifiers, subjects of tree structure design, feature selection at each internal node, and decision and search strategies are discussed.

[New design of the Health Survey of Catalonia (Spain, 2010-2014): a step forward in health planning and evaluation].

PubMed

Alcañiz-Zanón, Manuela; Mompart-Penina, Anna; Guillén-Estany, Montserrat; Medina-Bustos, Antonia; Aragay-Barbany, Josep M; Brugulat-Guiteras, Pilar; Tresserras-Gaju, Ricard

2014-01-01

This article presents the genesis of the Health Survey of Catalonia (Spain, 2010-2014) with its semiannual subsamples and explains the basic characteristics of its multistage sampling design. In comparison with previous surveys, the organizational advantages of this new statistical operation include rapid data availability and the ability to continuously monitor the population. The main benefits are timeliness in the production of indicators and the possibility of introducing new topics through the supplemental questionnaire as a function of needs. Limitations consist of the complexity of the sample design and the lack of longitudinal follow-up of the sample. Suitable sampling weights for each specific subsample are necessary for any statistical analysis of micro-data. Accuracy in the analysis of territorial disaggregation or population subgroups increases if annual samples are accumulated. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

A survey of intelligent tutoring systems: Implications for complex dynamic systems

NASA Technical Reports Server (NTRS)

Chu, Rose W.

1989-01-01

An overview of the research in the field of intelligent tutorial systems (ITS) is provided. The various approaches in the design and implementation of ITS are examined and discussed in the context of problem solving in an environment of a complex dynamic system (CDS). Issues pertaining to a CDS and the nature of human problem solving especially in light of a CDS are considered. An overview of the architecture of an ITS is provided as the basis for the in-depth examination of various systems. Finally, the implications for the design and evaluation of an ITS are discussed.

A Randomized Longitudinal Factorial Design to Assess Malaria Vector Control and Disease Management Interventions in Rural Tanzania

PubMed Central

Kramer, Randall A.; Mboera, Leonard E. G.; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H.; Paul, Christopher J.; Miranda, Marie Lynn

2014-01-01

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials. PMID:24840349

A randomized longitudinal factorial design to assess malaria vector control and disease management interventions in rural Tanzania.

PubMed

Kramer, Randall A; Mboera, Leonard E G; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H; Paul, Christopher J; Miranda, Marie Lynn

2014-05-16

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

[Satisfaction and perceived quality of people insured by the Social Health Protection in Mexico. Methodological foundations].

PubMed

Saturno-Hernández, Pedro J; Gutiérrez-Reyes, Juan Pablo; Vieyra-Romero, Waldo Ivan; Romero-Martínez, Martín; O'Shea-Cuevas, Gabriel Jaime; Lozano-Herrera, Javier; Tavera-Martínez, Sonia; Hernández-Ávila, Mauricio

2016-01-01

To describe the conceptual framework and methods for implementation and analysis of the satisfaction survey of the Mexican System for Social Protection in Health. We analyze the methodological elements of the 2013, 2014 and 2015 surveys, including the instrument, sampling method and study design, conceptual framework, and characteristics and indicators of the analysis. The survey captures information on perceived quality and satisfaction. Sampling has national and State representation. Simple and composite indicators (index of satisfaction and rate of reported quality problems) are built and described. The analysis is completed using Pareto diagrams, correlation between indicators and association with satisfaction by means of multivariate models. The measurement of satisfaction and perceived quality is a complex but necessary process to comply with regulations and to identify strategies for improvement. The described survey presents a design and rigorous analysis focused on its utility for improving.

Cognitive laboratory approach to designing questionnaires for surveys of the elderly.

PubMed Central

Jobe, J B; Mingay, D J

1990-01-01

Data from surveys of the elderly are used by policy analysts to design health services programs. Consequently, the quality of survey data on elderly respondents has important implications for this growing segment of society: improving the quality of data should result in more cost effective programs for the elderly. However, studies suggest that the quality of responses from the elderly may be less than that for other respondents. Moreover, the increasing needs of policy analysts and health researchers for data have resulted in more complex survey questions that place a high cognitive burden on respondents. New methods for improving the design of these questionnaires are needed. This project investigated whether new techniques of questionnaire design, adapted from the theories and methods of cognitive psychology, could be effectively used in interviewing older respondents. The techniques used in this study, concurrent think-aloud interviews with followup probe questions, have been shown recently to be effective with younger respondents. Problems that elderly respondents have in comprehending survey questions, retrieving relevant information from memory, and using decision processes to estimate and provide answers were investigated. Questions on functional ability and social support were taken from the 1984 Supplement on Aging to the National Health Interview Survey. Analysis of respondents' think-aloud protocols and responses to probes suggest that the cognitive interview procedures were effective in identifying problems with the survey questions that would result in data of poorer quality and in suggesting the wording of questions that would be likely to result in answers of greater validity and reliability. Implications of these results for survey design and validation studies are discussed. PMID:2120731

Estimating survival probabilities by exposure levels: utilizing vital statistics and complex survey data with mortality follow-up.

PubMed

Landsman, V; Lou, W Y W; Graubard, B I

2015-05-20

We present a two-step approach for estimating hazard rates and, consequently, survival probabilities, by levels of general categorical exposure. The resulting estimator utilizes three sources of data: vital statistics data and census data are used at the first step to estimate the overall hazard rate for a given combination of gender and age group, and cohort data constructed from a nationally representative complex survey with linked mortality records, are used at the second step to divide the overall hazard rate by exposure levels. We present an explicit expression for the resulting estimator and consider two methods for variance estimation that account for complex multistage sample design: (1) the leaving-one-out jackknife method, and (2) the Taylor linearization method, which provides an analytic formula for the variance estimator. The methods are illustrated with smoking and all-cause mortality data from the US National Health Interview Survey Linked Mortality Files, and the proposed estimator is compared with a previously studied crude hazard rate estimator that uses survey data only. The advantages of a two-step approach and possible extensions of the proposed estimator are discussed. Copyright © 2015 John Wiley & Sons, Ltd.

Health Insurance Coverage: Early Release of Estimates from the National Health Interview Survey, January -- June 2013

MedlinePlus

... Park, NC) to account for the complex sample design of NHIS, taking into account stratum and primary sampling unit (PSU) identifiers. The Taylor series linearization method was chosen for variance estimation. Trends ...

National Intimate Partner and Sexual Violence Survey: 2010 Findings on Victimization by Sexual Orientation

MedlinePlus

... information about response and cooperation rates and other methodological details of NISVS can be found in the ... software for analyzing data collected through complex sample design. The estimated number of victims affected by a ...

Analysis Thermal Comfort Condition in Complex Residential Building, Case Study: Chiangmai, Thailand

NASA Astrophysics Data System (ADS)

Juangjandee, Warangkana

2017-10-01

Due to the increasing need for complex residential buildings, it appears that people migrate into the high-density urban areas because the infrastructural facilities can be easily found in the modern metropolitan areas. Such rapid growth of urbanization creates congested residential buildings obstructing solar radiation and wind flow, whereas most urban residents spend 80-90% of their time indoor. Furthermore, the buildings were mostly built with average materials and construction detail. This causes high humidity condition for tenants that could promote mould growth. This study aims to analyse thermal comfort condition in complex residential building, Thailand for finding the passive solution to improve indoor air quality and respond to local conditions. The research methodology will be in two folds: 1) surveying on case study 2) analysis for finding the passive solution of reducing humidity indoor air The result of the survey indicated that the building need to find passive solution for solving humidity problem, that can be divided into two ways which raising ventilation and indoor temperature including increasing wind-flow ventilation and adjusting thermal temperature, for example; improving building design and stack driven ventilation. For raising indoor temperature or increasing mean radiant temperature, daylight can be passive solution for complex residential design for reducing humidity and enhance illumination indoor space simultaneous.

Comparing Errors in Medicaid Reporting across Surveys: Evidence to Date

PubMed Central

Call, Kathleen T; Davern, Michael E; Klerman, Jacob A; Lynch, Victoria

2013-01-01

Objective To synthesize evidence on the accuracy of Medicaid reporting across state and federal surveys. Data Sources All available validation studies. Study Design Compare results from existing research to understand variation in reporting across surveys. Data Collection Methods Synthesize all available studies validating survey reports of Medicaid coverage. Principal Findings Across all surveys, reporting some type of insurance coverage is better than reporting Medicaid specifically. Therefore, estimates of uninsurance are less biased than estimates of specific sources of coverage. The CPS stands out as being particularly inaccurate. Conclusions Measuring health insurance coverage is prone to some level of error, yet survey overstatements of uninsurance are modest in most surveys. Accounting for all forms of bias is complex. Researchers should consider adjusting estimates of Medicaid and uninsurance in surveys prone to high levels of misreporting. PMID:22816493

Assessing angler effort, catch, and harvest and the efficacy of a use-estimation system on a multi-lake fishery in middle Georgia

USGS Publications Warehouse

Roop, Hunter J.; Poudyal, Neelam C.; Jennings, Cecil A.

2018-01-01

Creel surveys are valuable tools in recreational fisheries management. However, multiple‐impoundment fisheries of complex spatial structure can complicate survey designs and pose logistical challenges for management agencies. Marben Public Fishing Area in Mansfield, GA is a multi‐impoundment fishery with many access points, and these features prevent or complicate use of traditional on‐site contact methods such as standard roving‐ or access‐point designs because many anglers may be missed during the survey process. Therefore, adaptation of a traditional survey method is often required for sampling this special case of multi‐lake fisheries to develop an accurate fishery profile. Accordingly, a modified non‐uniform probability roving creel survey was conducted at the Marben PFA during 2013 to estimate fishery characteristics relating to fishing effort, catch, and fish harvest. Monthly fishing effort averaged 7,523 angler‐hours (h) (SD = 5,956) and ranged from 1,301 h (SD = 562) in December to 21,856 h (SD = 5909) in May. A generalized linear mixed model was used to determine that angler catch and harvest rates were significantly higher in the spring and summer (all p < 0.05) than in the other seasons, but did not vary by fishing location. Our results demonstrate the utility of modifying existing creel methodology for monitoring small, spatially complex, intensely managed impoundments that support quality recreational fisheries and provide a template for the assessment and management of similar regional fisheries.

Dietary Supplement Use Among U.S. Adults Has Increased Since NHANES III (1988-1994)

MedlinePlus

... uses a complex, stratified, multistage probability cluster sampling design and oversamples in order to increase precision in estimates for certain groups. NHANES III was one in a series of periodic surveys conducted in two cycles during ...

A SURVEY OF LABORATORY AND STATISTICAL ISSUES RELATED TO FARMWORKER EXPOSURE STUDIES

EPA Science Inventory

Developing internally valid, and perhaps generalizable, farmworker exposure studies is a complex process that involves many statistical and laboratory considerations. Statistics are an integral component of each study beginning with the design stage and continuing to the final da...

HACC: Simulating sky surveys on state-of-the-art supercomputing architectures

NASA Astrophysics Data System (ADS)

Habib, Salman; Pope, Adrian; Finkel, Hal; Frontiere, Nicholas; Heitmann, Katrin; Daniel, David; Fasel, Patricia; Morozov, Vitali; Zagaris, George; Peterka, Tom; Vishwanath, Venkatram; Lukić, Zarija; Sehrish, Saba; Liao, Wei-keng

2016-01-01

Current and future surveys of large-scale cosmic structure are associated with a massive and complex datastream to study, characterize, and ultimately understand the physics behind the two major components of the 'Dark Universe', dark energy and dark matter. In addition, the surveys also probe primordial perturbations and carry out fundamental measurements, such as determining the sum of neutrino masses. Large-scale simulations of structure formation in the Universe play a critical role in the interpretation of the data and extraction of the physics of interest. Just as survey instruments continue to grow in size and complexity, so do the supercomputers that enable these simulations. Here we report on HACC (Hardware/Hybrid Accelerated Cosmology Code), a recently developed and evolving cosmology N-body code framework, designed to run efficiently on diverse computing architectures and to scale to millions of cores and beyond. HACC can run on all current supercomputer architectures and supports a variety of programming models and algorithms. It has been demonstrated at scale on Cell- and GPU-accelerated systems, standard multi-core node clusters, and Blue Gene systems. HACC's design allows for ease of portability, and at the same time, high levels of sustained performance on the fastest supercomputers available. We present a description of the design philosophy of HACC, the underlying algorithms and code structure, and outline implementation details for several specific architectures. We show selected accuracy and performance results from some of the largest high resolution cosmological simulations so far performed, including benchmarks evolving more than 3.6 trillion particles.

HACC: Simulating sky surveys on state-of-the-art supercomputing architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Pope, Adrian; Finkel, Hal

2016-01-01

Current and future surveys of large-scale cosmic structure are associated with a massive and complex datastream to study, characterize, and ultimately understand the physics behind the two major components of the ‘Dark Universe’, dark energy and dark matter. In addition, the surveys also probe primordial perturbations and carry out fundamental measurements, such as determining the sum of neutrino masses. Large-scale simulations of structure formation in the Universe play a critical role in the interpretation of the data and extraction of the physics of interest. Just as survey instruments continue to grow in size and complexity, so do the supercomputers thatmore » enable these simulations. Here we report on HACC (Hardware/Hybrid Accelerated Cosmology Code), a recently developed and evolving cosmology N-body code framework, designed to run efficiently on diverse computing architectures and to scale to millions of cores and beyond. HACC can run on all current supercomputer architectures and supports a variety of programming models and algorithms. It has been demonstrated at scale on Cell- and GPU-accelerated systems, standard multi-core node clusters, and Blue Gene systems. HACC’s design allows for ease of portability, and at the same time, high levels of sustained performance on the fastest supercomputers available. We present a description of the design philosophy of HACC, the underlying algorithms and code structure, and outline implementation details for several specific architectures. We show selected accuracy and performance results from some of the largest high resolution cosmological simulations so far performed, including benchmarks evolving more than 3.6 trillion particles.« less

33 CFR 273.13 - Program policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Program is designed to deal primarily with weed infestations of major economic significance including... should constitute investigation of a specific problem weed or weed complex, not generalized surveys of... Control Program, except as such areas may be used for experimental purposes in research performed for the...

33 CFR 273.13 - Program policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Program is designed to deal primarily with weed infestations of major economic significance including... should constitute investigation of a specific problem weed or weed complex, not generalized surveys of... Control Program, except as such areas may be used for experimental purposes in research performed for the...

33 CFR 273.13 - Program policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Program is designed to deal primarily with weed infestations of major economic significance including... should constitute investigation of a specific problem weed or weed complex, not generalized surveys of... Control Program, except as such areas may be used for experimental purposes in research performed for the...

33 CFR 273.13 - Program policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Program is designed to deal primarily with weed infestations of major economic significance including... should constitute investigation of a specific problem weed or weed complex, not generalized surveys of... Control Program, except as such areas may be used for experimental purposes in research performed for the...

33 CFR 273.13 - Program policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Program is designed to deal primarily with weed infestations of major economic significance including... should constitute investigation of a specific problem weed or weed complex, not generalized surveys of... Control Program, except as such areas may be used for experimental purposes in research performed for the...

Socio-Technical Perspective on Interdisciplinary Interactions During the Development of Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria R.; Daly, Shanna; Baker, Wayne; Papalambros, panos; Seifert, Colleen

2013-01-01

This study investigates interdisciplinary interactions that take place during the research, development, and early conceptual design phases in the design of large-scale complex engineered systems (LaCES) such as aerospace vehicles. These interactions, that take place throughout a large engineering development organization, become the initial conditions of the systems engineering process that ultimately leads to the development of a viable system. This paper summarizes some of the challenges and opportunities regarding social and organizational issues that emerged from a qualitative study using ethnographic and survey data. The analysis reveals several socio-technical couplings between the engineered system and the organization that creates it. Survey respondents noted the importance of interdisciplinary interactions and their benefits to the engineered system as well as substantial challenges in interdisciplinary interactions. Noted benefits included enhanced knowledge and problem mitigation and noted obstacles centered on organizational and human dynamics. Findings suggest that addressing the social challenges may be a critical need in enabling interdisciplinary interactions

Towards a standard design model for quad-rotors: A review of current models, their accuracy and a novel simplified model

NASA Astrophysics Data System (ADS)

Amezquita-Brooks, Luis; Liceaga-Castro, Eduardo; Gonzalez-Sanchez, Mario; Garcia-Salazar, Octavio; Martinez-Vazquez, Daniel

2017-11-01

Applications based on quad-rotor-vehicles (QRV) are becoming increasingly wide-spread. Many of these applications require accurate mathematical representations for control design, simulation and estimation. However, there is no consensus on a standardized model for these purposes. In this article a review of the most common elements included in QRV models reported in the literature is presented. This survey shows that some elements are recurrent for typical non-aerobatic QRV applications; in particular, for control design and high-performance simulation. By synthesising the common features of the reviewed models a standard generic model SGM is proposed. The SGM is cast as a typical state-space model without memory-less transformations, a structure which is useful for simulation and controller design. The survey also shows that many QRV applications use simplified representations, which may be considered simplifications of the SGM here proposed. In order to assess the effectiveness of the simplified models, a comprehensive comparison based on digital simulations is presented. With this comparison, it is possible to determine the accuracy of each model under particular operating ranges. Such information is useful for the selection of a model according to a particular application. In addition to the models found in the literature, in this article a novel simplified model is derived. The main characteristics of this model are that its inner dynamics are linear, it has low complexity and it has a high level of accuracy in all the studied operating ranges, a characteristic found only in more complex representations. To complement the article the main elements of the SGM are evaluated with the aid of experimental data and the computational complexity of all surveyed models is briefly analysed. Finally, the article presents a discussion on how the structural characteristics of the models are useful to suggest particular QRV control structures.

Fisheye Photogrammetry: Tests and Methodologies for the Survey of Narrow Spaces

NASA Astrophysics Data System (ADS)

Perfetti, L.; Polari, C.; Fassi, F.

2017-02-01

The research illustrated in this article aimed at identifying a good standard methodology to survey very narrow spaces during 3D investigation of Cultural Heritage. It is an important topic in today's era of BIM modelling applied to Cultural Heritage. Spaces like staircases, corridors and passages are very common in the architectural or archaeological fields, and obtaining a 3D-oriented survey of those areas can be a very complex task when completeness of the model and high precision are requested. Photogrammetry appears to be the most promising solution in terms of versatility and manoeuvrability also considering the quality of the required data. Fisheye lenses were studied and tested in depth because of their significant advantage in the field of view if compared with rectilinear lenses. This advantage alone can be crucial to reduce the total amount of photos and, as a consequence, to obtain manageable data, to simplify the survey phase and to significantly reduce the elaboration time. In order to overcome the main issue that arise when using fisheye lenses, which is the lack of rules that can be employed to design the survey, a general mathematical formulation to precisely estimate the GSD (Ground Sampling Distance) for every optical projection is presented here. A complete survey of a real complex case study was performed in order to test and stress the proposed methodology, and to handle a fisheye-based survey from beginning to end: the photogrammetric survey of the Minguzzi Staircase. It is a complex service spiral-staircase located in the Duomo di Milano with a total height of 25 meters and characterized by a narrow walkable space about 70 centimetres wide.

Assessing Nursing Care Needs of Children With Complex Medical Conditions: The Nursing-Kids Intensity of Care Survey (N-KICS).

PubMed

Navarra, Ann-Margaret; Schlau, Rona; Murray, Meghan; Mosiello, Linda; Schneider, Laura; Jackson, Olivia; Cohen, Bevin; Saiman, Lisa; Larson, Elaine L

2016-01-01

Recent medical advances have resulted in increased survival of children with complex medical conditions (CMC), but there are no validated methods to measure their care needs. To design and test the Nursing-Kids Intensity of Care Survey (N-KICS) tool and describe intensity of nursing care for children with CMC. The psychometric evaluation confirmed an acceptable standard for reliability and validity and feasibility. Intensity scores were highest for nursing care related to infection control, medication administration, nutrition, diaper changes, hygiene, neurological and respiratory support, and standing program. Development of a psychometrically sound measure of nursing intensity will help evaluate and plan nursing care for children with CMC. Copyright © 2016 Elsevier Inc. All rights reserved.

Assessing Nursing Care Needs of Children with Complex Medical Conditions: The Nursing Kids Intensity of Care Survey (N-KICS)

PubMed Central

Navarra, Ann-Margaret; Schlau, Rona; Murray, Meghan; Mosiello, Linda; Schneider, Laura; Jackson, Olivia; Cohen, Bevin; Saiman, Lisa; Larson, Elaine L.

2015-01-01

Background Recent medical advances have resulted in increased survival of children with complex medical conditions (CMC), but there are no validated methods to measure their care needs. Objectives/Methods To design and test the Nursing-Kids Intensity of Care Survey (N-KICS) tool and describe intensity of nursing care for children with CMC. Results The psychometric evaluation confirmed an acceptable standard for reliability and validity and feasibility. Intensity scores were highest for nursing care related to infection control, medication administration, nutrition, diaper changes, hygiene, neurological and respiratory support, and standing program. Conclusions Development of a psychometrically sound measure of nursing intensity will help evaluate and plan nursing care for children with CMC. PMID:26777429

Improving inference for aerial surveys of bears: The importance of assumptions and the cost of unnecessary complexity.

PubMed

Schmidt, Joshua H; Wilson, Tammy L; Thompson, William L; Reynolds, Joel H

2017-07-01

Obtaining useful estimates of wildlife abundance or density requires thoughtful attention to potential sources of bias and precision, and it is widely understood that addressing incomplete detection is critical to appropriate inference. When the underlying assumptions of sampling approaches are violated, both increased bias and reduced precision of the population estimator may result. Bear ( Ursus spp.) populations can be difficult to sample and are often monitored using mark-recapture distance sampling (MRDS) methods, although obtaining adequate sample sizes can be cost prohibitive. With the goal of improving inference, we examined the underlying methodological assumptions and estimator efficiency of three datasets collected under an MRDS protocol designed specifically for bears. We analyzed these data using MRDS, conventional distance sampling (CDS), and open-distance sampling approaches to evaluate the apparent bias-precision tradeoff relative to the assumptions inherent under each approach. We also evaluated the incorporation of informative priors on detection parameters within a Bayesian context. We found that the CDS estimator had low apparent bias and was more efficient than the more complex MRDS estimator. When combined with informative priors on the detection process, precision was increased by >50% compared to the MRDS approach with little apparent bias. In addition, open-distance sampling models revealed a serious violation of the assumption that all bears were available to be sampled. Inference is directly related to the underlying assumptions of the survey design and the analytical tools employed. We show that for aerial surveys of bears, avoidance of unnecessary model complexity, use of prior information, and the application of open population models can be used to greatly improve estimator performance and simplify field protocols. Although we focused on distance sampling-based aerial surveys for bears, the general concepts we addressed apply to a variety of wildlife survey contexts.

Trajectory Design Tools for Libration and Cis-Lunar Environments

NASA Technical Reports Server (NTRS)

Folta, David C.; Webster, Cassandra M.; Bosanac, Natasha; Cox, Andrew; Guzzetti, Davide; Howell, Kathleen C.

2016-01-01

Innovative trajectory design tools are required to support challenging multi-body regimes with complex dynamics, uncertain perturbations, and the integration of propulsion influences. Two distinctive tools, Adaptive Trajectory Design and the General Mission Analysis Tool have been developed and certified to provide the astrodynamics community with the ability to design multi-body trajectories. In this paper we discuss the multi-body design process and the capabilities of both tools. Demonstrable applications to confirmed missions, the Lunar IceCube Cubesat lunar mission and the Wide-Field Infrared Survey Telescope (WFIRST) Sun-Earth L2 mission, are presented.

MONITORING AND ASSESSING THE CONDITION OF AQUATIC RESOURCES: ROLE OF COMPLEX SURVEY DESIGN AND ANALYSIS

EPA Science Inventory

The National Water Quality Monitoring Council (NWQMC) developed a common framework for aquatic resource monitoring. The framework is described in a series of articles published in Water Resources IMPACT, September, 2003. One objective of the framework is to encourage consistenc...

Using Ants To Investigate the Environment.

ERIC Educational Resources Information Center

Hagevik, Rita A.

2003-01-01

Describes three inquiry-based activities designed for students to begin to understand complex environmental relationships in their own backyard. Includes investigations of ants, which allow students to establish a baseline survey of ant fauna, test the importance of ants in nutrient cycling and soil structure maintenances, and increase student…

Structural Equation Modeling of School Violence Data: Methodological Considerations

ERIC Educational Resources Information Center

Mayer, Matthew J.

2004-01-01

Methodological challenges associated with structural equation modeling (SEM) and structured means modeling (SMM) in research on school violence and related topics in the social and behavioral sciences are examined. Problems associated with multiyear implementations of large-scale surveys are discussed. Complex sample designs, part of any…

Evaluation design for a complex intervention program targeting loneliness in non-institutionalized elderly Dutch people

PubMed Central

2010-01-01

Background The aim of this paper is to provide the rationale for an evaluation design for a complex intervention program targeting loneliness among non-institutionalized elderly people in a Dutch community. Complex public health interventions characteristically use the combined approach of intervening on the individual and on the environmental level. It is assumed that the components of a complex intervention interact with and reinforce each other. Furthermore, implementation is highly context-specific and its impact is influenced by external factors. Although the entire community is exposed to the intervention components, each individual is exposed to different components with a different intensity. Methods/Design A logic model of change is used to develop the evaluation design. The model describes what outcomes may logically be expected at different points in time at the individual level. In order to address the complexity of a real-life setting, the evaluation design of the loneliness intervention comprises two types of evaluation studies. The first uses a quasi-experimental pre-test post-test design to evaluate the effectiveness of the overall intervention. A control community comparable to the intervention community was selected, with baseline measurements in 2008 and follow-up measurements scheduled for 2010. This study focuses on changes in the prevalence of loneliness and in the determinants of loneliness within individuals in the general elderly population. Complementarily, the second study is designed to evaluate the individual intervention components and focuses on delivery, reach, acceptance, and short-term outcomes. Different means of project records and surveys among participants are used to collect these data. Discussion Combining these two evaluation strategies has the potential to assess the effectiveness of the overall complex intervention and the contribution of the individual intervention components thereto. PMID:20836840

Preparing Psychiatric Residents for the "Real World": A Practice Management Curriculum

ERIC Educational Resources Information Center

Wichman, Christina L.; Netzel, Pamela J.; Menaker, Ronald

2009-01-01

Objective: The authors describe a course designed for residents to develop the knowledge and skills necessary to collaborate and successfully compete in today's complex health care environment and to achieve competency in systems-based practice. Methods: Postgraduation surveys demonstrated a need for improvement in preparing residents for practice…

Addressing Children's Alternative Frameworks of the Moon's Phases and Eclipses.

ERIC Educational Resources Information Center

Barnett, Michael; Morran, Judy

2002-01-01

Analyzes a project-based space science curriculum designed to support elementary school students in understanding complex, inter-related astronomy concepts. Uses pre- and post-interviews, examines student work, and has students complete a pre- and post-astronomy conceptual survey to assess conceptual change. Points out that instruction should…

Current practices in clinical neurofeedback with functional MRI-Analysis of a survey using the TIDieR checklist.

PubMed

Randell, Elizabeth; McNamara, Rachel; Subramanian, Leena; Hood, Kerenza; Linden, David

2018-04-01

A core principle of creating a scientific evidence base is that results can be replicated in independent experiments and in health intervention research. The TIDieR (Template for Intervention Description and Replication) checklist has been developed to aid in summarising key items needed when reporting clinical trials and other well designed evaluations of complex interventions in order that findings can be replicated or built on reliably. Neurofeedback (NF) using functional MRI (fMRI) is a multicomponent intervention that should be considered a complex intervention. The TIDieR checklist (with minor modification to increase applicability in this context) was distributed to NF researchers as a survey of current practice in the design and conduct of clinical studies. The aim was to document practice and convergence between research groups, highlighting areas for discussion and providing a basis for recommendations for harmonisation and standardisation. The TIDieR checklist was interpreted and expanded (21 questions) to make it applicable to neurofeedback research studies. Using the web-based Bristol Online Survey (BOS) tool, the revised checklist was disseminated to researchers in the BRAINTRAIN European research collaborative network (supported by the European Commission) and others in the fMRI-neurofeedback community. There were 16 responses to the survey. Responses were reported under eight main headings which covered the six domains of the TIDieR checklist: What, Why, When, How, Where and Who. This piece of work provides encouraging insight into the ability to be able to map neuroimaging interventions to a structured framework for reporting purposes. Regardless of the considerable variability of design components, all studies could be described in standard terms of diagnostic groups, dose/duration, targeted areas/signals, and psychological strategies and learning models. Recommendations are made which include providing detailed rationale of intervention design in study protocols. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Evaluation design for a complex intervention program targeting loneliness in non-institutionalized elderly Dutch people.

PubMed

de Vlaming, Rianne; Haveman-Nies, Annemien; Van't Veer, Pieter; de Groot, Lisette Cpgm

2010-09-13

The aim of this paper is to provide the rationale for an evaluation design for a complex intervention program targeting loneliness among non-institutionalized elderly people in a Dutch community. Complex public health interventions characteristically use the combined approach of intervening on the individual and on the environmental level. It is assumed that the components of a complex intervention interact with and reinforce each other. Furthermore, implementation is highly context-specific and its impact is influenced by external factors. Although the entire community is exposed to the intervention components, each individual is exposed to different components with a different intensity. A logic model of change is used to develop the evaluation design. The model describes what outcomes may logically be expected at different points in time at the individual level. In order to address the complexity of a real-life setting, the evaluation design of the loneliness intervention comprises two types of evaluation studies. The first uses a quasi-experimental pre-test post-test design to evaluate the effectiveness of the overall intervention. A control community comparable to the intervention community was selected, with baseline measurements in 2008 and follow-up measurements scheduled for 2010. This study focuses on changes in the prevalence of loneliness and in the determinants of loneliness within individuals in the general elderly population. Complementarily, the second study is designed to evaluate the individual intervention components and focuses on delivery, reach, acceptance, and short-term outcomes. Different means of project records and surveys among participants are used to collect these data. Combining these two evaluation strategies has the potential to assess the effectiveness of the overall complex intervention and the contribution of the individual intervention components thereto.

Nonlinear Dynamic Behavior in the Cassini Spacecraft Modal Survey

NASA Technical Reports Server (NTRS)

Carney, Kelly S.

1997-01-01

In October 1997, the 6-ton robotic spacecraft, Cassini, will lift off from Cape Canaveral atop a Titan IV B rocket, beginning a 7-year journey to Saturn. Upon completion of that voyage, Cassini will send the Huygens probe into the atmosphere of Saturn's largest moon, Titan. Cassini will then spend years studying Saturn's vast realm of rings, icy moons, and magnetic fields. The size and complexity of this endeavor mandates the involvement of many organizations. The Jet Propulsion Laboratory (JPL) manages the project for NASA and is responsible for the spacecraft design, development, and assembly. The NASA Lewis Research Center is the launch system integrator. As is typical for such a spacecraft, a test-verified finite element model is required for loads analysis. JPL had responsibility for the Cassini modal survey and the development of the spacecraft test-verified finite element model. Test verification is a complex and sometimes subjective process. Because of this, NASA Lewis independently verified and validated the Cassini spacecraft modal survey.

Use of High Fidelity Methods in Multidisciplinary Optimization-A Preliminary Survey

NASA Technical Reports Server (NTRS)

Guruswamy, Guru P.; Kwak, Dochan (Technical Monitor)

2002-01-01

Multidisciplinary optimization is a key element of design process. To date multidiscipline optimization methods that use low fidelity methods are well advanced. Optimization methods based on simple linear aerodynamic equations and plate structural equations have been applied to complex aerospace configurations. However, use of high fidelity methods such as the Euler/ Navier-Stokes for fluids and 3-D (three dimensional) finite elements for structures has begun recently. As an activity of Multidiscipline Design Optimization Technical Committee (MDO TC) of AIAA (American Institute of Aeronautics and Astronautics), an effort was initiated to assess the status of the use of high fidelity methods in multidisciplinary optimization. Contributions were solicited through the members MDO TC committee. This paper provides a summary of that survey.

The Theos/ComRes survey into public perception of Darwinism in the UK: a recipe for confusion.

PubMed

Baker, Sylvia

2012-04-01

A survey of the general public in the UK, conducted in 2008, suggested that more than half of the British population are unconvinced by Darwinism. That survey, conducted by the polling company ComRes on behalf of the theological think-tank Theos, reported its full findings in March 2009 and found them to be "complex and confused." This paper argues that the confusion identified may have been partly engendered by the way in which the survey questionnaire was constructed and that the survey itself, not simply its respondents, was confused. A source of the confusion, it is argued, could be found, first, in the definitions used for the four positions of young earth creationism, theistic evolution, atheistic evolution and intelligent design. Second, a failure to define the key terms "evolution" and "science," used in some of the survey questions, resulted in responses that were difficult to interpret.

77 FR 25097 - Fisheries of the Northeastern United States; 2012-2013 Northeast Skate Complex Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

... scientific information and reflect recent increases in skate biomass. DATES: This rule is effective May 1... average trawl survey biomass of clearnose skate declines by 40 percent or more. Additionally, this final... precautionary catch levels designed to promote biomass increases in all skates. Therefore, the commenter's...

Try Out a New OD Approach: Measuring Climate and Communication with the Organizational Communication Profile.

ERIC Educational Resources Information Center

Peterson, Brent D.; Pace, R. Wayne

The Organizational Communication Profile (OCP) provides a way to survey organization member attitudes, perceptions, expectations, and degree of satisfaction with the manner in which information is handled within the organization. Although the OCP is relatively easy to administer and interpret, the instrument has a complex design and provides…

Exploring and Leveraging Chinese International Students' Strengths for Success

ERIC Educational Resources Information Center

He, Ye; Hutson, Bryant

2018-01-01

This study used an Appreciative Education framework to explore the strengths of Chinese international students and to identify areas where support is needed during their transition to U.S. higher education settings. Using a convergent mixed methods design with data collected from surveys, interviews and focus groups, the complex nature of the…

The Danish National Health Survey 2010. Study design and respondent characteristics.

PubMed

Christensen, Anne Illemann; Ekholm, Ola; Glümer, Charlotte; Andreasen, Anne Helms; Hvidberg, Michael Falk; Kristensen, Peter Lund; Larsen, Finn Breinholt; Ortiz, Britta; Juel, Knud

2012-06-01

In 2010 the five Danish regions and the National Institute of Public Health at the University of Southern Denmark conducted a national representative health survey among the adult population in Denmark. This paper describes the study design and the sample and study population as well as the content of the questionnaire. The survey was based on five regional stratified random samples and one national random sample. The samples were mutually exclusive. A total of 298,550 individuals (16 years or older) were invited to participate. Information was collected using a mixed mode approach (paper and web questionnaires). A questionnaire with a minimum of 52 core questions was used in all six subsamples. Calibrated weights were computed in order to take account of the complex survey design and reduce non-response bias. In all, 177,639 individuals completed the questionnaire (59.5%). The response rate varied from 52.3% in the Capital Region of Denmark sample to 65.5% in the North Denmark Region sample. The response rate was particularly low among young men, unmarried people and among individuals with a different ethnic background than Danish. The survey was a result of extensive national cooperation across sectors, which makes it unique in its field of application, e.g. health surveillance, planning and prioritizing public health initiatives and research. However, the low response rate in some subgroups of the study population can pose problems in generalizing data, and efforts to increase the response rate will be important in the forthcoming surveys.

Addressing Thermal Model Run Time Concerns of the Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA)

NASA Technical Reports Server (NTRS)

Peabody, Hume; Guerrero, Sergio; Hawk, John; Rodriguez, Juan; McDonald, Carson; Jackson, Cliff

2016-01-01

The Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA) utilizes an existing 2.4 m diameter Hubble sized telescope donated from elsewhere in the federal government for near-infrared sky surveys and Exoplanet searches to answer crucial questions about the universe and dark energy. The WFIRST design continues to increase in maturity, detail, and complexity with each design cycle leading to a Mission Concept Review and entrance to the Mission Formulation Phase. Each cycle has required a Structural-Thermal-Optical-Performance (STOP) analysis to ensure the design can meet the stringent pointing and stability requirements. As such, the models have also grown in size and complexity leading to increased model run time. This paper addresses efforts to reduce the run time while still maintaining sufficient accuracy for STOP analyses. A technique was developed to identify slews between observing orientations that were sufficiently different to warrant recalculation of the environmental fluxes to reduce the total number of radiation calculation points. The inclusion of a cryocooler fluid loop in the model also forced smaller time-steps than desired, which greatly increases the overall run time. The analysis of this fluid model required mitigation to drive the run time down by solving portions of the model at different time scales. Lastly, investigations were made into the impact of the removal of small radiation couplings on run time and accuracy. Use of these techniques allowed the models to produce meaningful results within reasonable run times to meet project schedule deadlines.

Measuring coverage in MNCH: design, implementation, and interpretation challenges associated with tracking vaccination coverage using household surveys.

PubMed

Cutts, Felicity T; Izurieta, Hector S; Rhoda, Dale A

2013-01-01

Vaccination coverage is an important public health indicator that is measured using administrative reports and/or surveys. The measurement of vaccination coverage in low- and middle-income countries using surveys is susceptible to numerous challenges. These challenges include selection bias and information bias, which cannot be solved by increasing the sample size, and the precision of the coverage estimate, which is determined by the survey sample size and sampling method. Selection bias can result from an inaccurate sampling frame or inappropriate field procedures and, since populations likely to be missed in a vaccination coverage survey are also likely to be missed by vaccination teams, most often inflates coverage estimates. Importantly, the large multi-purpose household surveys that are often used to measure vaccination coverage have invested substantial effort to reduce selection bias. Information bias occurs when a child's vaccination status is misclassified due to mistakes on his or her vaccination record, in data transcription, in the way survey questions are presented, or in the guardian's recall of vaccination for children without a written record. There has been substantial reliance on the guardian's recall in recent surveys, and, worryingly, information bias may become more likely in the future as immunization schedules become more complex and variable. Finally, some surveys assess immunity directly using serological assays. Sero-surveys are important for assessing public health risk, but currently are unable to validate coverage estimates directly. To improve vaccination coverage estimates based on surveys, we recommend that recording tools and practices should be improved and that surveys should incorporate best practices for design, implementation, and analysis.

A demonstration of a transportable radio interferometric surveying system with 3-cm accuracy on a 307-m base line

NASA Technical Reports Server (NTRS)

Ong, K. M.; Macdoran, P. F.; Thomas, J. B.; Fliegel, H. F.; Skjerve, L. J.; Spitzmesser, D. J.; Batelaan, P. D.; Paine, S. R.; Newsted, M. G.

1976-01-01

A precision geodetic measurement system (Aries, for Astronomical Radio Interferometric Earth Surveying) based on the technique of very long base line interferometry has been designed and implemented through the use of a 9-m transportable antenna and the NASA 64-m antenna of the Deep Space Communications Complex at Goldstone, California. A series of experiments designed to demonstrate the inherent accuracy of a transportable interferometer was performed on a 307-m base line during the period from December 1973 to June 1974. This short base line was chosen in order to obtain a comparison with a conventional survey with a few-centimeter accuracy and to minimize Aries errors due to transmission media effects, source locations, and earth orientation parameters. The base-line vector derived from a weighted average of the measurements, representing approximately 24 h of data, possessed a formal uncertainty of about 3 cm in all components. This average interferometry base-line vector was in good agreement with the conventional survey vector within the statistical range allowed by the combined uncertainties (3-4 cm) of the two techniques.

Characteristics of the 2011 Tohoku Tsunami and introduction of two level tsunamis for tsunami disaster mitigation

PubMed Central

SATO, Shinji

2015-01-01

Characteristics of the 2011 Tohoku Tsunami have been revealed by collaborative tsunami surveys extensively performed under the coordination of the Joint Tsunami Survey Group. The complex behaviors of the mega-tsunami were characterized by the unprecedented scale and the low occurrence frequency. The limitation and the performance of tsunami countermeasures were described on the basis of tsunami surveys, laboratory experiments and numerical analyses. These findings contributed to the introduction of two-level tsunami hazards to establish a new strategy for tsunami disaster mitigation, combining structure-based flood protection designed by the Level-1 tsunami and non-structure-based damage reduction planned by the Level-2 tsunami. PMID:26062739

Characteristics of the 2011 Tohoku Tsunami and introduction of two level tsunamis for tsunami disaster mitigation.

PubMed

Sato, Shinji

2015-01-01

Characteristics of the 2011 Tohoku Tsunami have been revealed by collaborative tsunami surveys extensively performed under the coordination of the Joint Tsunami Survey Group. The complex behaviors of the mega-tsunami were characterized by the unprecedented scale and the low occurrence frequency. The limitation and the performance of tsunami countermeasures were described on the basis of tsunami surveys, laboratory experiments and numerical analyses. These findings contributed to the introduction of two-level tsunami hazards to establish a new strategy for tsunami disaster mitigation, combining structure-based flood protection designed by the Level-1 tsunami and non-structure-based damage reduction planned by the Level-2 tsunami.

3D resistivity survey for shallow subsurface fault investigations

NASA Astrophysics Data System (ADS)

Petrit, Kraipat; Klamthim, Poonnapa; Duerrast, Helmut

2018-03-01

The shallow subsurface is subject to various human activities, and the place of occurrence of geohazards, e.g. shallow active faults. The identification of the location and orientation of such faults can be vital for infrastructure development. The aim of this study was to develop a low-cost 3D resistivity survey system, with reasonable survey time for shallow fault investigations. The study area in Songkhla Province, Thailand is located in an old quarry where faults could be identified in outcrops. The study area was designed to cover the expected fault with 100 electrodes arranged in a 10×10 square grid with an electrode spacing of 3 meters in x and y axis. Each electrode in turn was used as a current and potential electrode using a dipole-dipole array. Field data have been processed and interpreted using 3DResINV. Results, presented in horizontal depth slices and vertical xz- and yz-cross sections, revealed through differences in resistivity down to 8 m depths a complex structural setting with two shallow faults and dipping sedimentary rock layers. In conclusion, this study has shown that a 3D resistivity survey can imagine complex tectonic structures, thus providing a far more insight into the shallow subsurface.

Ethnic and Racial Socialization and Self-Esteem of Asian Adoptees: The Mediating Role of Multiple Identities

ERIC Educational Resources Information Center

Mohanty, Jayashree

2013-01-01

Positive identity development during adolescence in general is a complex process and may pose additional challenges for adolescents adopted from a different culture. Using a web-based survey design with a sample of 100 internationally adopted Asian adolescent and young adults, the present study examined the mediating role of multiple identities…

Efficient Analysis of Complex Structures

NASA Technical Reports Server (NTRS)

Kapania, Rakesh K.

2000-01-01

Last various accomplishments achieved during this project are : (1) A Survey of Neural Network (NN) applications using MATLAB NN Toolbox on structural engineering especially on equivalent continuum models (Appendix A). (2) Application of NN and GAs to simulate and synthesize substructures: 1-D and 2-D beam problems (Appendix B). (3) Development of an equivalent plate-model analysis method (EPA) for static and vibration analysis of general trapezoidal built-up wing structures composed of skins, spars and ribs. Calculation of all sorts of test cases and comparison with measurements or FEA results. (Appendix C). (4) Basic work on using second order sensitivities on simulating wing modal response, discussion of sensitivity evaluation approaches, and some results (Appendix D). (5) Establishing a general methodology of simulating the modal responses by direct application of NN and by sensitivity techniques, in a design space composed of a number of design points. Comparison is made through examples using these two methods (Appendix E). (6) Establishing a general methodology of efficient analysis of complex wing structures by indirect application of NN: the NN-aided Equivalent Plate Analysis. Training of the Neural Networks for this purpose in several cases of design spaces, which can be applicable for actual design of complex wings (Appendix F).

The Aerial Regional-scale Environmental Survey (ARES) Mission to Mars

NASA Technical Reports Server (NTRS)

Levine, J. S.

2005-01-01

ARES is an exploration mission concept for an Aerial Regional-scale Environmental Survey of Mars designed to fly an instrumented platform over the surface of Mars at very low altitudes (1-3 km) for distances of hundreds to thousands of kilometers to obtain scientific data to address fundamental problems in Mars science. ARES helps to fill a gap in the scale and perspective of the Mars Exploration Program and addresses many key COMPLEX/MEPAG questions (e.g., nature and origin of crustal magnetic anomalies) not readily pursued in other parts of the exploration program. ARES supports the human exploration program through key environmental measurements and high-resolution contiguous data essential to reference mission design. Here we describe the major types of scientific goals, candidate instruments, and reference mission profiles.

Geoscience techniques for engineering assessment of Oman to India pipeline route

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baerenwald, P.D.; Mullee, J.E.; Campbell, K.J.

1996-12-31

A variety of geoscience techniques were used to define soil conditions and evaluate geologic processes in order to develop design criteria for complex segments of the proposed Oman to Indian pipeline route. Geophysical survey data, seafloor cores, ROV observation of the seafloor, and oceanographic measurements were the principal field data collected. Geotechnical soil testing, and X-ray radiography, detailed geologic logging, and C-14 age dating of cores were carried out. The diverse sets of field data and lab test results were integrated by a multi-disciplined team of geoscientists and engineers to develop geologic and soil models, soil design criteria, a turbidmore » flow model, and seafloor stability models. The integrated approach used here is applicable to other complex areas where seafloor stability needs to be assessed or design criteria need to be developed for active geologic processes.« less

Why Don't We Ask? A Complementary Method for Assessing the Status of Great Apes

PubMed Central

Meijaard, Erik; Mengersen, Kerrie; Buchori, Damayanti; Nurcahyo, Anton; Ancrenaz, Marc; Wich, Serge; Atmoko, Sri Suci Utami; Tjiu, Albertus; Prasetyo, Didik; Nardiyono; Hadiprakarsa, Yokyok; Christy, Lenny; Wells, Jessie; Albar, Guillaume; Marshall, Andrew J.

2011-01-01

Species conservation is difficult. Threats to species are typically high and immediate. Effective solutions for counteracting these threats, however, require synthesis of high quality evidence, appropriately targeted activities, typically costly implementation, and rapid re-evaluation and adaptation. Conservation management can be ineffective if there is insufficient understanding of the complex ecological, political, socio-cultural, and economic factors that underlie conservation threats. When information about these factors is incomplete, conservation managers may be unaware of the most urgent threats or unable to envision all consequences of potential management strategies. Conservation research aims to address the gap between what is known and what knowledge is needed for effective conservation. Such research, however, generally addresses a subset of the factors that underlie conservation threats, producing a limited, simplistic, and often biased view of complex, real world situations. A combination of approaches is required to provide the complete picture necessary to engage in effective conservation. Orangutan conservation (Pongo spp.) offers an example: standard conservation assessments employ survey methods that focus on ecological variables, but do not usually address the socio-cultural factors that underlie threats. Here, we evaluate a complementary survey method based on interviews of nearly 7,000 people in 687 villages in Kalimantan, Indonesia. We address areas of potential methodological weakness in such surveys, including sampling and questionnaire design, respondent biases, statistical analyses, and sensitivity of resultant inferences. We show that interview-based surveys can provide cost-effective and statistically robust methods to better understand poorly known populations of species that are relatively easily identified by local people. Such surveys provide reasonably reliable estimates of relative presence and relative encounter rates of such species, as well as quantifying the main factors that threaten them. We recommend more extensive use of carefully designed and implemented interview surveys, in conjunction with more traditional field methods. PMID:21483859

Neurosurgery certification in member societies of the World Federation of Neurosurgical Societies: Asia.

PubMed

Gasco, Jaime; Braun, Jonathan D; McCutcheon, Ian E; Black, Peter M

2011-01-01

To objectively compare the complexity and diversity of the certification process in neurological surgery in member societies of the World Federation of Neurosurgical Societies. This study centers in continental Asia. We provide here an analysis based on the responses provided to a 13-item survey. The data received were analyzed, and three Regional Complexity Scores (RCS) were designed. To compare national board experience, eligibility requirements for access to the certification process, and the obligatory nature of the examinations, an RCS-Organizational score was created (20 points maximum). To analyze the complexity of the examination, an RCS-Components score was designed (20 points maximum). The sum of both is presented in a Global RCS score. Only those countries that responded to the survey and presented nationwide homogeneity in the conduction of neurosurgery examinations could be included within the scoring system. In addition, a descriptive summary of the certification process per responding society is also provided. On the basis of the data provided by our RCS system, the highest global RCS was achieved by South Korea and Malaysia (21/40 points) followed by the joint examination of Singapore and Hong-Kong (FRCS-Ed) (20/40 points), Japan (17/40 points), the Philippines (15/40 points), and Taiwan (13 points). The experience from these leading countries should be of value to all countries within Asia. Copyright © 2011 Elsevier Inc. All rights reserved.

Applications of Evolutionary Technology to Manufacturing and Logistics Systems : State-of-the Art Survey

NASA Astrophysics Data System (ADS)

Gen, Mitsuo; Lin, Lin

Many combinatorial optimization problems from industrial engineering and operations research in real-world are very complex in nature and quite hard to solve them by conventional techniques. Since the 1960s, there has been an increasing interest in imitating living beings to solve such kinds of hard combinatorial optimization problems. Simulating the natural evolutionary process of human beings results in stochastic optimization techniques called evolutionary algorithms (EAs), which can often outperform conventional optimization methods when applied to difficult real-world problems. In this survey paper, we provide a comprehensive survey of the current state-of-the-art in the use of EA in manufacturing and logistics systems. In order to demonstrate the EAs which are powerful and broadly applicable stochastic search and optimization techniques, we deal with the following engineering design problems: transportation planning models, layout design models and two-stage logistics models in logistics systems; job-shop scheduling, resource constrained project scheduling in manufacturing system.

Modal Survey of ETM-3, A 5-Segment Derivative of the Space Shuttle Solid Rocket Booster

NASA Technical Reports Server (NTRS)

Nielsen, D.; Townsend, J.; Kappus, K.; Driskill, T.; Torres, I.; Parks, R.

2005-01-01

The complex interactions between internal motor generated pressure oscillations and motor structural vibration modes associated with the static test configuration of a Reusable Solid Rocket Motor have potential to generate significant dynamic thrust loads in the 5-segment configuration (Engineering Test Motor 3). Finite element model load predictions for worst-case conditions were generated based on extrapolation of a previously correlated 4-segment motor model. A modal survey was performed on the largest rocket motor to date, Engineering Test Motor #3 (ETM-3), to provide data for finite element model correlation and validation of model generated design loads. The modal survey preparation included pretest analyses to determine an efficient analysis set selection using the Effective Independence Method and test simulations to assure critical test stand component loads did not exceed design limits. Historical Reusable Solid Rocket Motor modal testing, ETM-3 test analysis model development and pre-test loads analyses, as well as test execution, and a comparison of results to pre-test predictions are discussed.

Time stress measurement device: system design and synthesis

NASA Astrophysics Data System (ADS)

Harchani, Noursaied; Jimenez, Fernando; Al-Mohammed, Mohammed; Esteve, Daniel; Courvoisier, M.

2000-04-01

System design methodology becomes a strategic activity in the industrial competition. Obtaining substantial reduction of time to market for complex and reliable products is one of the priorities for the manufacturers. Top down design, automated generation of architecture, co-design, virtual prototyping, etc. are already identified as research topics which have to be privileged. To be efficient, each theoretical contribution must be inserted in a global procedure of project management where complementary elements such as marketing, technico-economic survey, road-mapping, internal know-how,.. must be considered. In this context, this paper will present a design methodology starting from the requirement statement until the technical realization of the product, and applied to the design of a Time Stress Measurement Device for the observation of aeronautical mechanical systems.

Examination of Libby, Montana, Fill Material for Background Levels of Amphibole from the Rainy Creek Complex Using Scanning Electron Microscopy and X-Ray Microanalysis

USGS Publications Warehouse

Adams, David T.; Langer, William H.; Hoefen, Todd M.; Van Gosen, Bradley S.; Meeker, Gregory P.

2010-01-01

Natural background levels of Libby-type amphibole in the sediment of the Libby valley in Montana have not, up to this point, been determined. The purpose of this report is to provide the preliminary findings of a study designed by both the U.S. Geological Survey and the U.S. Environmental Protection Agency and performed by the U.S. Geological Survey. The study worked to constrain the natural background levels of fibrous amphiboles potentially derived from the nearby Rainy Creek Complex. The material selected for this study was sampled from three localities, two of which are active open-pit sand and gravel mines. Seventy samples were collected in total and examined using a scanning electron microscope equipped with an energy dispersive x-ray spectrometer. All samples contained varying amounts of feldspars, ilmenite, magnetite, quartz, clay minerals, pyroxene minerals, and non-fibrous amphiboles such as tremolite, actinolite, and magnesiohornblende. Of the 70 samples collected, only three had detectable levels of fibrous amphiboles compatible with those found in the rainy creek complex. The maximum concentration, identified here, of the amphiboles potentially from the Rainy Creek Complex is 0.083 percent by weight.

Methodological considerations in using complex survey data: an applied example with the Head Start Family and Child Experiences Survey.

PubMed

Hahs-Vaughn, Debbie L; McWayne, Christine M; Bulotsky-Shearer, Rebecca J; Wen, Xiaoli; Faria, Ann-Marie

2011-06-01

Complex survey data are collected by means other than simple random samples. This creates two analytical issues: nonindependence and unequal selection probability. Failing to address these issues results in underestimated standard errors and biased parameter estimates. Using data from the nationally representative Head Start Family and Child Experiences Survey (FACES; 1997 and 2000 cohorts), three diverse multilevel models are presented that illustrate differences in results depending on addressing or ignoring the complex sampling issues. Limitations of using complex survey data are reported, along with recommendations for reporting complex sample results. © The Author(s) 2011

Survey of multi-function display and control technology

NASA Technical Reports Server (NTRS)

Spiger, R. J.; Farrell, R. J.; Tonkin, M. H.

1982-01-01

The NASA orbiter spacecraft incorporates a complex array of systems, displays and controls. The incorporation of discrete dedicated controls into a multi-function display and control system (MFDCS) offers the potential for savings in weight, power, panel space and crew training time. The technology applicable to the development of a MFDCS for orbiter application is surveyed. Technology thought to be applicable presently or in the next five years is highlighted. Areas discussed include display media, data handling and processing, controls and operator interactions and the human factors considerations which are involved in a MFDCS design. Several examples of applicable MFDCS technology are described.

Measuring Coverage in MNCH: Design, Implementation, and Interpretation Challenges Associated with Tracking Vaccination Coverage Using Household Surveys

PubMed Central

Cutts, Felicity T.; Izurieta, Hector S.; Rhoda, Dale A.

2013-01-01

Vaccination coverage is an important public health indicator that is measured using administrative reports and/or surveys. The measurement of vaccination coverage in low- and middle-income countries using surveys is susceptible to numerous challenges. These challenges include selection bias and information bias, which cannot be solved by increasing the sample size, and the precision of the coverage estimate, which is determined by the survey sample size and sampling method. Selection bias can result from an inaccurate sampling frame or inappropriate field procedures and, since populations likely to be missed in a vaccination coverage survey are also likely to be missed by vaccination teams, most often inflates coverage estimates. Importantly, the large multi-purpose household surveys that are often used to measure vaccination coverage have invested substantial effort to reduce selection bias. Information bias occurs when a child's vaccination status is misclassified due to mistakes on his or her vaccination record, in data transcription, in the way survey questions are presented, or in the guardian's recall of vaccination for children without a written record. There has been substantial reliance on the guardian's recall in recent surveys, and, worryingly, information bias may become more likely in the future as immunization schedules become more complex and variable. Finally, some surveys assess immunity directly using serological assays. Sero-surveys are important for assessing public health risk, but currently are unable to validate coverage estimates directly. To improve vaccination coverage estimates based on surveys, we recommend that recording tools and practices should be improved and that surveys should incorporate best practices for design, implementation, and analysis. PMID:23667334

The profiles of students with significant cognitive disabilities and complex communication needs.

PubMed

Erickson, Karen A; Geist, Lori A

2016-09-01

Understanding the characteristics of students with complex communication needs and significant cognitive disabilities is an important first step toward creating the kinds of supports and services required to help them successfully access the general education curriculum, achieve grade-level standards, and improve overall communication competence. The First Contact Survey was designed to collect important information about students with significant cognitive disabilities who were eligible to take the Dynamic Learning Maps™ (DLM(®)) alternate assessment based on alternate achievement standards. From November 2012-May 2013, the survey was used to gather information regarding more than 44,787 students. At that time, the goal was to use the data to inform the development of the DLM assessment. Although the survey includes a wealth of information regarding this large sample of students, the reanalysis of the data reported in the current study focused on the motor, sensory, language, reading, and writing skills of students with significant cognitive disabilities, based on their speech production abilities. Significant differences were identified across each of the domains between students who do and do not use speech with or without aided augmentative and alternative communication.

Best Practices in Using Large, Complex Samples: The Importance of Using Appropriate Weights and Design Effect Compensation

ERIC Educational Resources Information Center

Osborne, Jason W.

2011-01-01

Large surveys often use probability sampling in order to obtain representative samples, and these data sets are valuable tools for researchers in all areas of science. Yet many researchers are not formally prepared to appropriately utilize these resources. Indeed, users of one popular dataset were generally found "not" to have modeled…

Engineering and Design: Structural Deformation Surveying

DTIC Science & Technology

2002-06-01

loading deformations. Long-term measurements are far more common and somewhat more complex given their external nature . Long-term monitoring of a...fitting of structural elements, environmental protection, and development of mitigative measures in the case of natural disasters (land slides, earthquakes...of additional localized monitoring points (i.e., points not intended for routine observation) to determine the nature and extent of large displacements

Comparison of Efficiency of Jackknife and Variance Component Estimators of Standard Errors. Program Statistics Research. Technical Report.

ERIC Educational Resources Information Center

Longford, Nicholas T.

Large scale surveys usually employ a complex sampling design and as a consequence, no standard methods for estimation of the standard errors associated with the estimates of population means are available. Resampling methods, such as jackknife or bootstrap, are often used, with reference to their properties of robustness and reduction of bias. A…

Statistical methods for efficient design of community surveys of response to noise: Random coefficients regression models

NASA Technical Reports Server (NTRS)

Tomberlin, T. J.

1985-01-01

Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.

Multimorbidity and unmet citizens’ needs and expectations urge for reforms in the health system of Cyprus: a questionnaire survey

PubMed Central

Theodosopoulou, Eleni; Papanastasiou, Elena

2014-01-01

Objective This study aims to investigate the prevalence of multimorbidity in Cyprus and the extent to which citizens are satisfied with the currently provided healthcare and to provide recommendations on the basis of findings. Design A nationally based survey conducted through personal interviews, using a structured questionnaire designed for this survey. Setting Cyprus rural and urban areas (excluding Turkish occupied areas). Participants Four hundred and sixty-five Cypriot adults, average age 53 years. Main outcome measures Lifetime prevalence of self-reported non-communicable diseases. Results This study demonstrated initial evidence for a high prevalence of non-age specific multimorbidity among Cypriots and dissatisfaction with their doctors, especially for the time allocated to discuss their general state of health. Recommendations focus on a new cost-effective, person-centred model of healthcare. The model prioritizes prevention rather than treatment, targeting the determinants of complexity before their influences create conditions that demand high-cost interventions, and it is based on three fundamental principles: (1) tackling health as a political issue, (2) empowering the patient and (3) introducing Applied Nutrition in the system. Conclusions This study threw light into the issue of patient complexity and revealed unmet people’s needs and expectations for a more person-centred care, providing a first challenge to the single disease-based system of healthcare in Cyprus. The findings of the study may have important implications for government policies and highlight the need for more research in this area to inform policy makers, particularly in view of the fact that a new Health System is currently being designed. PMID:25057367

Payload crew interface design criteria and techniques. Task 1: Inflight operations and training for payloads. [space shuttles

NASA Technical Reports Server (NTRS)

Carmean, W. D.; Hitz, F. R.

1976-01-01

Guidelines are developed for use in control and display panel design for payload operations performed on the aft flight deck of the orbiter. Preliminary payload procedures are defined. Crew operational concepts are developed. Payloads selected for operational simulations were the shuttle UV optical telescope (SUOT), the deep sky UV survey telescope (DUST), and the shuttle UV stellar spectrograph (SUSS). The advanced technology laboratory payload consisting of 11 experiments was selected for a detailed evaluation because of the availability of operational data and its operational complexity.

A comparison of response rates in the English Longitudinal Study of Ageing and the Health and Retirement Study

PubMed Central

Cheshire, Hayley; Ofstedal, Mary Beth; Scholes, Shaun; Schroeder, Mathis

2013-01-01

Survey response rates are an important measure of the quality of a survey; this is true for both longitudinal and cross-sectional surveys. However, the concept of a response rate in the context of a panel survey is more complex than is the case for a cross-sectional survey. There are typically many different response rates that can be calculated for a panel survey, each of which may be relevant for a specific purpose. The main objective of our paper is to document and compare response rates for two long-term panel studies of ageing, the English Longitudinal Study of Ageing (ELSA) and the Health and Retirement Study (HRS) in the United States. To guide our selection and calculation of response rates for the two studies, we use a framework that was developed by Peter Lynn (2005) and present several different types of longitudinal response rates for the two surveys. We discuss similarities and differences in the study designs and protocols and how some of the differences affect comparisons of response rates across the two studies. PMID:24432049

Formative feedback and scaffolding for developing complex problem solving and modelling outcomes

NASA Astrophysics Data System (ADS)

Frank, Brian; Simper, Natalie; Kaupp, James

2018-07-01

This paper discusses the use and impact of formative feedback and scaffolding to develop outcomes for complex problem solving in a required first-year course in engineering design and practice at a medium-sized research-intensive Canadian university. In 2010, the course began to use team-based, complex, open-ended contextualised problems to develop problem solving, communications, teamwork, modelling, and professional skills. Since then, formative feedback has been incorporated into: task and process-level feedback on scaffolded tasks in-class, formative assignments, and post-assignment review. Development in complex problem solving and modelling has been assessed through analysis of responses from student surveys, direct criterion-referenced assessment of course outcomes from 2013 to 2015, and an external longitudinal study. The findings suggest that students are improving in outcomes related to complex problem solving over the duration of the course. Most notably, the addition of new feedback and scaffolding coincided with improved student performance.

Surviving or Thriving? Do Teachers Have Lower Perceived Control and Well-Being than Other Professions?

ERIC Educational Resources Information Center

Grenville-Cleave, Bridget; Boniwell, Ilona

2012-01-01

Teaching is not what it used to be. The complexity and intensity of the pressures on teachers and the pace of education reform are unprecedented. The aim of this research was to explore perceived control and well-being in teachers and other professionals. A mixed methods design was selected. Phase 1 consisted of an online quantitative survey (298…

Generalized adjustment by least squares ( GALS).

USGS Publications Warehouse

Elassal, A.A.

1983-01-01

The least-squares principle is universally accepted as the basis for adjustment procedures in the allied fields of geodesy, photogrammetry and surveying. A prototype software package for Generalized Adjustment by Least Squares (GALS) is described. The package is designed to perform all least-squares-related functions in a typical adjustment program. GALS is capable of supporting development of adjustment programs of any size or degree of complexity. -Author

An operationalized post-normal science framework for assisting in the development of complex science policy solutions: the case of nanotechnology governance

NASA Astrophysics Data System (ADS)

Bernstein, Michael J.; Foley, Rider W.; Bennett, Ira

2014-07-01

Scientists, engineers, and policy analysts commonly suggest governance regimes for technology to maximize societal benefits and minimize negative societal and environmental impacts of innovation processes. Yet innovation is a complex socio-technical process that does not respond predictably to modification. Our human propensity to exclude complexity when attempting to manage systems often results in insufficient, one-dimensional solutions. The tendency to exclude complexity (1) reinforces itself by diminishing experience and capacity in the design of simple solutions to complex problems, and (2) leads to solutions that do not address the identified problem. To address the question of how to avoid a complexity- exclusion trap, this article operationalizes a post-normal science framework to assist in the enhancement or design of science policy proposals. A literature review of technological fixes, policy panaceas, and knowledge-to-action gaps is conducted to survey examples of post-normal science frameworks. Next, an operational framework is used to assess the case of a proposed international nanotechnology advisory board. The framework reveals that the board addresses a slice of the broader, more complex problem of nanotechnology governance. We argue that while the formation of an international advisory board is not problematic in-and-of-itself, it is symptomatic of and plays into a complexity- exclusion trap. We offer researchers, policy analysts, and decision-makers three recommendations that incorporate a more appropriate level of complexity into governance proposals.

NASA Langley Distributed Propulsion VTOL Tilt-Wing Aircraft Testing, Modeling, Simulation, Control, and Flight Test Development

NASA Technical Reports Server (NTRS)

Rothhaar, Paul M.; Murphy, Patrick C.; Bacon, Barton J.; Gregory, Irene M.; Grauer, Jared A.; Busan, Ronald C.; Croom, Mark A.

2014-01-01

Control of complex Vertical Take-Off and Landing (VTOL) aircraft traversing from hovering to wing born flight mode and back poses notoriously difficult modeling, simulation, control, and flight-testing challenges. This paper provides an overview of the techniques and advances required to develop the GL-10 tilt-wing, tilt-tail, long endurance, VTOL aircraft control system. The GL-10 prototype's unusual and complex configuration requires application of state-of-the-art techniques and some significant advances in wind tunnel infrastructure automation, efficient Design Of Experiments (DOE) tunnel test techniques, modeling, multi-body equations of motion, multi-body actuator models, simulation, control algorithm design, and flight test avionics, testing, and analysis. The following compendium surveys key disciplines required to develop an effective control system for this challenging vehicle in this on-going effort.

Status of the NASA SETI Sky Survey microwave observing project

NASA Technical Reports Server (NTRS)

Klein, M. J.; Gulkis, S.; Wilck, H. C.; Olsen, E. T.; Garyantes, M. F.; Burns, D. J.; Asmar, P. R.; Brady, R. B.; Deich, W. T. S.; Renzetti, N. A.

1992-01-01

The Sky Survey observing program is one of two complementary strategies that NASA plans to use in its microwave Search for Extraterrestrial Intelligence (SETI). The primary objective of the Sky Survey is to search the entire sky over the frequency range 1000-10,000 MHz for evidence of narrow band signals of extraterrestrial, intelligent origin. Spectrum analyzers with upwards of 10 million channels and data rates in excess of 10 gigabits per second are required to complete the survey in less than 7 years. To lay the foundation for the operational SETI Sky Survey, a prototype system has been built to test and refine real time signal detection algorithms, to test scan strategies and observatory control functions, and to test algorithms designed to reject radio frequency interference. This paper presents a high level description of the prototype hardware and reports on the preparations to deploy the system to the 34-m antenna at the research and development station of NASA's Deep Space Communication Complex, Goldstone, California.

Status of the NASA SETI Sky Survey microwave observing project.

PubMed

Klein, M J; Gulkis, S; Wilck, H C; Olsen, E T; Garyantes, M F; Burns, D J; Asmar, P R; Brady, R B; Deich, W T; Renzetti, N A

1992-01-01

The Sky Survey observing program is one of two complementary strategies that NASA plans to use in its microwave Search for Extraterrestrial Intelligence (SETI). The primary objective of the Sky Survey is to search the entire sky over the frequency range 1000-10,000 MHz for evidence of narrow band signals of extraterrestrial, intelligent origin. Spectrum analyzers with upwards of 10 million channels and data rates in excess of 10 gigabits per second are required to complete the survey in less than 7 years. To lay the foundation for the operational SETI Sky Survey, a prototype system has been built to test and refine real time signal detection algorithms, to test scan strategies and observatory control functions, and to test algorithms designed to reject radio frequency interference. This paper presents a high level description of the prototype hardware and software and reports on the preparations to deploy the system to the 34-m antenna at the research and development station of NASA's Deep Space Communication Complex, Goldstone, California.

Thimble microscope system

NASA Astrophysics Data System (ADS)

Kamal, Tahseen; Rubinstein, Jaden; Watkins, Rachel; Cen, Zijian; Kong, Gary; Lee, W. M.

2016-12-01

Wearable computing devices, e.g. Google Glass, Smart watch, embodies the new human design frontier, where technology interfaces seamlessly with human gestures. During examination of any subject in the field (clinic, surgery, agriculture, field survey, water collection), our sensory peripherals (touch and vision) often go hand-in-hand. The sensitivity and maneuverability of the human fingers are guided with tight distribution of biological nerve cells, which perform fine motor manipulation over a range of complex surfaces that is often out of sight. Our sight (or naked vision), on the other hand, is generally restricted to line of sight that is ill-suited to view around corner. Hence, conventional imaging methods are often resort to complex light guide designs (periscope, endoscopes etc) to navigate over obstructed surfaces. Using modular design strategies, we constructed a prototype miniature microscope system that is incorporated onto a wearable fixture (thimble). This unique platform allows users to maneuver around a sample and take high resolution microscopic images. In this paper, we provide an exposition of methods to achieve a thimble microscopy; microscope lens fabrication, thimble design, integration of miniature camera and liquid crystal display.

Child health in complex emergencies.

PubMed Central

Moss, William J.; Ramakrishnan, Meenakshi; Storms, Dory; Henderson Siegle, Anne; Weiss, William M.; Lejnev, Ivan; Muhe, Lulu

2006-01-01

Coordinated and effective interventions are critical for relief efforts to be successful in addressing the health needs of children in situations of armed conflict, population displacement, and/or food insecurity. We reviewed published literature and surveyed international relief organizations engaged in child health activities in complex emergencies. Our aim was to identify research needs and improve guidelines for the care of children. Much of the literature details the burden of disease and the causes of morbidity and mortality; few interventional studies have been published. Surveys of international relief organizations showed that most use World Health Organization (WHO), United Nations Children's Fund (UNICEF), and ministry of health guidelines designed for use in stable situations. Organizations were least likely to have formal guidelines on the management of asphyxia, prematurity, and infection in neonates; diagnosis and management of children with human immunodeficiency virus (HIV) infection; active case-finding and treatment of tuberculosis; paediatric trauma; and the diagnosis and management of mental-health problems in children. Guidelines often are not adapted to the different types of health-care workers who provide care in complex emergencies. Evidence-based, locally adapted guidelines for the care of children in complex emergencies should be adopted by ministries of health, supported by WHO and UNICEF, and disseminated to international relief organizations to ensure appropriate, effective, and uniform care. PMID:16501716

Designing HIGH-COST medicine: hospital surveys, health planning, and the paradox of progressive reform.

PubMed

Perkins, Barbara Bridgman

2010-02-01

Inspired by social medicine, some progressive US health reforms have paradoxically reinforced a business model of high-cost medical delivery that does not match social needs. In analyzing the financial status of their areas' hospitals, for example, city-wide hospital surveys of the 1910s through 1930s sought to direct capital investments and, in so doing, control competition and markets. The 2 national health planning programs that ran from the mid-1960s to the mid-1980s continued similar strategies of economic organization and management, as did the so-called market reforms that followed. Consequently, these reforms promoted large, extremely specialized, capital-intensive institutions and systems at the expense of less complex (and less costly) primary and chronic care. The current capital crisis may expose the lack of sustainability of such a model and open up new ideas and new ways to build health care designed to meet people's health needs.

Understanding sources of uncertainty and bias error in models of human response to low amplitude sonic booms

NASA Astrophysics Data System (ADS)

Collmar, M.; Cook, B. G.; Cowart, R.; Freund, D.; Gavin, J.

2015-10-01

A pool of 240 subjects was exposed to a library of waveforms consisting of example signatures of low boom aircraft. The signature library included intentional variations in both loudness and spectral content, and were auralized using the Gulfstream SASS-II sonic boom simulator. Post-processing was used to quantify the impacts of test design decisions on the "quality" of the resultant database. Specific lessons learned from this study include insight regarding potential for bias error due to variations in loudness or peak over-pressure, sources of uncertainty and their relative importance on objective measurements and robustness of individual metrics to wide variations in spectral content. Results provide clear guidance for design of future large scale community surveys, where one must optimize the complex tradeoffs between the size of the surveyed population, spatial footprint of those participants, and the fidelity/density of objective measurements.

Exploring with PAM: Prospecting ANTS Missions for Solar System Surveys

NASA Technical Reports Server (NTRS)

Clark, P. E.; Rilee, M. L.; Curtis, S. A.

2003-01-01

ANTS (Autonomous Nano-Technology Swarm), a large (1000 member) swarm of nano to picoclass (10 to 1 kg) totally autonomous spacecraft, are being developed as a NASA advanced mission concept. ANTS, based on a hierarchical insect social order, use an evolvable, self-similar, hierarchical neural system in which individual spacecraft represent the highest level nodes. ANTS uses swarm intelligence attained through collective, cooperative interactions of the nodes at all levels of the system. At the highest levels this can take the form of cooperative, collective behavior among the individual spacecraft in a very large constellation. The ANTS neural architecture is designed for totally autonomous operation of complex systems including spacecraft constellations. The ANTS (Autonomous Nano Technology Swarm) concept has a number of possible applications. A version of ANTS designed for surveying and determining the resource potential of the asteroid belt, called PAM (Prospecting ANTS Mission), is examined here.

Evidence-based design and evaluation of a whole genome sequencing clinical report for the reference microbiology laboratory.

PubMed

Crisan, Anamaria; McKee, Geoffrey; Munzner, Tamara; Gardy, Jennifer L

2018-01-01

Microbial genome sequencing is now being routinely used in many clinical and public health laboratories. Understanding how to report complex genomic test results to stakeholders who may have varying familiarity with genomics-including clinicians, laboratorians, epidemiologists, and researchers-is critical to the successful and sustainable implementation of this new technology; however, there are no evidence-based guidelines for designing such a report in the pathogen genomics domain. Here, we describe an iterative, human-centered approach to creating a report template for communicating tuberculosis (TB) genomic test results. We used Design Study Methodology-a human centered approach drawn from the information visualization domain-to redesign an existing clinical report. We used expert consults and an online questionnaire to discover various stakeholders' needs around the types of data and tasks related to TB that they encounter in their daily workflow. We also evaluated their perceptions of and familiarity with genomic data, as well as its utility at various clinical decision points. These data shaped the design of multiple prototype reports that were compared against the existing report through a second online survey, with the resulting qualitative and quantitative data informing the final, redesigned, report. We recruited 78 participants, 65 of whom were clinicians, nurses, laboratorians, researchers, and epidemiologists involved in TB diagnosis, treatment, and/or surveillance. Our first survey indicated that participants were largely enthusiastic about genomic data, with the majority agreeing on its utility for certain TB diagnosis and treatment tasks and many reporting some confidence in their ability to interpret this type of data (between 58.8% and 94.1%, depending on the specific data type). When we compared our four prototype reports against the existing design, we found that for the majority (86.7%) of design comparisons, participants preferred the alternative prototype designs over the existing version, and that both clinicians and non-clinicians expressed similar design preferences. Participants showed clearer design preferences when asked to compare individual design elements versus entire reports. Both the quantitative and qualitative data informed the design of a revised report, available online as a LaTeX template. We show how a human-centered design approach integrating quantitative and qualitative feedback can be used to design an alternative report for representing complex microbial genomic data. We suggest experimental and design guidelines to inform future design studies in the bioinformatics and microbial genomics domains, and suggest that this type of mixed-methods study is important to facilitate the successful translation of pathogen genomics in the clinic, not only for clinical reports but also more complex bioinformatics data visualization software.

Evidence-based design and evaluation of a whole genome sequencing clinical report for the reference microbiology laboratory

PubMed Central

Crisan, Anamaria; McKee, Geoffrey; Munzner, Tamara

2018-01-01

Background Microbial genome sequencing is now being routinely used in many clinical and public health laboratories. Understanding how to report complex genomic test results to stakeholders who may have varying familiarity with genomics—including clinicians, laboratorians, epidemiologists, and researchers—is critical to the successful and sustainable implementation of this new technology; however, there are no evidence-based guidelines for designing such a report in the pathogen genomics domain. Here, we describe an iterative, human-centered approach to creating a report template for communicating tuberculosis (TB) genomic test results. Methods We used Design Study Methodology—a human centered approach drawn from the information visualization domain—to redesign an existing clinical report. We used expert consults and an online questionnaire to discover various stakeholders’ needs around the types of data and tasks related to TB that they encounter in their daily workflow. We also evaluated their perceptions of and familiarity with genomic data, as well as its utility at various clinical decision points. These data shaped the design of multiple prototype reports that were compared against the existing report through a second online survey, with the resulting qualitative and quantitative data informing the final, redesigned, report. Results We recruited 78 participants, 65 of whom were clinicians, nurses, laboratorians, researchers, and epidemiologists involved in TB diagnosis, treatment, and/or surveillance. Our first survey indicated that participants were largely enthusiastic about genomic data, with the majority agreeing on its utility for certain TB diagnosis and treatment tasks and many reporting some confidence in their ability to interpret this type of data (between 58.8% and 94.1%, depending on the specific data type). When we compared our four prototype reports against the existing design, we found that for the majority (86.7%) of design comparisons, participants preferred the alternative prototype designs over the existing version, and that both clinicians and non-clinicians expressed similar design preferences. Participants showed clearer design preferences when asked to compare individual design elements versus entire reports. Both the quantitative and qualitative data informed the design of a revised report, available online as a LaTeX template. Conclusions We show how a human-centered design approach integrating quantitative and qualitative feedback can be used to design an alternative report for representing complex microbial genomic data. We suggest experimental and design guidelines to inform future design studies in the bioinformatics and microbial genomics domains, and suggest that this type of mixed-methods study is important to facilitate the successful translation of pathogen genomics in the clinic, not only for clinical reports but also more complex bioinformatics data visualization software. PMID:29340235

Status report, The Public Health and Planning 101 project: strengthening collaborations between the public health and planning professions.

PubMed

Mahendra, A; Vo, T; Einstoss, C; Weppler, J; Gillen, P; Ryan, L; Haley, K

2017-01-01

Land use planning is a complex field comprised of legislation, policies, processes and tools. A growing body of evidence supports the relationship between land use planning decisions, community design and health. The built environment has been shown to be associated with physical inactivity, obesity, cardiovascular disease, respiratory disease and mental illness. Consequently, there is a growing interest within public health to work with planners on land use planning initiatives such as official plans and transportation master plans. Two surveys were developed: one for public health professionals and the other for planning professionals (survey questions available upon request to the corresponding author). The surveys were pilot tested in two separate focus group sessions with public health and planning professionals. Focus group volunteers helped to validate the surveys by verifying survey questions, design and overall flow. In early 2012, 304 public health professionals and 301 planning professionals completed the two separate surveys, comprising the total survey respondents for each respective profession used to calculate proportions. The survey results represent a convenience sample and are not generalizable to the entire population of public health and planning professionals in Ontario. Results compare survey responses from both groups where appropriate. Most respondents worked either as public health staff (78%) or planners/senior planners (58%). A smaller percentage of public health and planning professionals worked either as managers (15% and 11%, respectively) or directors (5% and 9%, respectively). Health is associated with how communities are planned and built, and the services and resources provided within them. Inspired by the results of our survey and based on user feedback from the pilot tests, a free online training program entitled "Public Health and Planning 101: An Online Course for Public Health and Planning Professionals to Create Healthier Built Environments" was launched in 2016 by OPHA as a collaborative project with OPPI and PHAC. This course is designed to bridge the gaps between the two professions, as well as provide greater opportunities for developing collaborative partnerships to help create and foster healthy built environments.

Biologic surveys for the Sandia National Laboratories, Coyote Canyon Test Complex, Kirtland Air Force Base, Albuquerque, New Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, R.M.; Knight, P.J.

This report provides results of a comprehensive biologic survey performed in Coyote Canyon Test Complex (CCTC), Sandia National Laboratories (SNL), Bernalillo County, New Mexico, which was conducted during the spring and summer of 1992 and 1993. CCTC is sited on land owned by the Department of Energy (DOE) and Kirtland Air Force Base and managed by SNL. The survey covered 3,760 acres of land, most of which is rarely disturbed by CCTC operations. Absence of grazing by livestock and possibly native ungulates, and relative to the general condition of private range lands throughout New Mexico, and relative to other grazingmore » lands in central New Mexico. Widely dispersed, low intensity use by SNL as well as prohibition of grazing has probably contributed to abundance of special status species such as grama grass cactus within the CCTC area. This report evaluates threatened and endangered species found in the area, as well as comprehensive assessment of biologic habitats. Included are analyses of potential impacts and mitigative measures designed to reduce or eliminate potential impacts. Included is a summary of CCTC program and testing activities.« less

Patient Smoking Cessation Advice by Health Care Providers: The Role of Ethnicity, Socioeconomic Status, and Health

PubMed Central

Houston, Thomas K.; Scarinci, Isabel C.; Person, Sharina D.; Greene, Paul G.

2005-01-01

Objectives. We assessed differences by ethnicity in ever receiving advice from providers to quit smoking. We evaluated whether socioeconomic status and health status were moderators of the association. Methods. We used 2000 Behavioral Risk Factor Surveillance Survey data, a population-based cross-sectional survey. Results. After adjusting for complex survey design, 69% of the 14089 current smokers reported ever being advised to quit by a provider. Hispanics (50%) and African Americans (61%) reported receiving smoking counseling less frequently compared with Whites (72%, P<.01 for each). Ethnic minority status, lower education, and poorer health status remained significantly associated with lower rates of advice to quit after adjustment for number of cigarettes, time from last provider visit, income, comorbidities, health insurance, gender, and age. Smoking counseling differences between African Americans and Whites were greater among those with lower income and those without health insurance. Compared with Whites, differences for both Hispanics and African Americans were also greater among those with lower education. Conclusion. We found lower rates of smoking cessation advice among ethnic minorities. However, we also found complex interactions of ethnicity with socioeconomic factors. PMID:15914833

A Methodological Review of the Assessment of Humanism in Medical Students.

PubMed

Buck, Era; Holden, Mark; Szauter, Karen

2015-11-01

Humanism is a complex construct that defies simplistic measurement. How educators measure humanism shapes understanding and implications for learners. This systematic review sought to address the following questions: How do medical educators assess humanism in medical students, and how does the measurement impact the understanding of humanism in undergraduate medical education (UME)? Using the IECARES (integrity, excellence, compassion, altruism, respect, empathy, and service) Gold Foundation framework, a search of English literature databases from 2000 to 2013 on assessment of humanism in medical students revealed more than 900 articles, of which 155 met criteria for analysis. Using descriptive statistics, articles and assessments were analyzed for construct measured, study design, assessment method, instrument type, perspective/source of assessment, student level, validity evidence, and national context. Of 202 assessments reported in 155 articles, 162 (80%) used surveys; 164 (81%) used student self-reports. One hundred nine articles (70%) included only one humanism construct. Empathy was the most prevalent construct present in 96 (62%); 49 (51%) of those used a single instrument. One hundred fifteen (74%) used exclusively quantitative data; only 48 (31%) used a longitudinal design. Construct underrepresentation was identified as a threat to validity in half of the assessments. Articles included 34 countries; 87 (56%) were from North America. Assessment of humanism in UME incorporates a limited scope of a complex construct, often relying on single quantitative measures from self-reported survey instruments. This highlights the need for multiple methods, perspectives, and longitudinal designs to strengthen the validity of humanism assessments.

Studies on the Processing Methods for Extraterrestrial Materials

NASA Technical Reports Server (NTRS)

Grimley, R. T.; Lipschutz, M. E.

1984-01-01

The literature was surveyed for high temperature mass spectrometric research on single oxides, complex oxides, and minerals in an effort to develop a means of separating elements and compounds from lunar and other extraterrestrial materials. A data acquisition system for determining vaporization rates as a function of time and temperature and software for the IEEE-488 Apple-ORTEC interface are discussed. Experimental design information from a 1000 C furnace were used with heat transfer calculations to develop the basic design for a 1600 C furnace. A controller was built for the higher temperature furnace and drawings are being made for the furnace.

Prospective evaluation of a complex public health intervention: lessons from an initial and follow-up cross-sectional survey of the tuberculosis strain typing service in England.

PubMed

Mears, Jessica; Abubakar, Ibrahim; Crisp, Debbie; Maguire, Helen; Innes, John A; Lilley, Mike; Lord, Joanne; Cohen, Ted; Borgdorff, Martien W; Vynnycky, Emilia; McHugh, Timothy D; Sonnenberg, Pam

2014-10-02

The national tuberculosis strain typing service (TB-STS) was introduced in England in 2010. The TB-STS involves MIRU-VNTR typing of isolates from all TB patients for the prospective identification, reporting and investigation of TB strain typing clusters. As part of a mixed-method evaluation, we report on a repeated cross-sectional survey to illustrate the challenges surrounding the evaluation of a complex national public health intervention. An online initial and follow-up questionnaire survey assessed the knowledge, attitudes and practices of public health staff, physicians and nurses working in TB control in November 2010 and March 2012. It included questions on the implementation, experience and uptake of the TB-STS. Participants that responded to both surveys were included in the analysis. 248 participants responded to the initial survey and 137 of these responded to the follow-up survey (56% retention). Knowledge: A significant increase in knowledge was observed, including a rise in the proportion of respondents who had received training (28.6% to 67.9%, p = 0.003), and the self-rated knowledge of how to use strain typing had improved ('no knowledge' decreased from 43.2% to 27.4%). Attitudes: The majority of respondents found strain typing useful; the proportion that reported strain typing to be useful was similar across the two surveys (95.7% to 94.7%, p = 0.67). Practices: There were significant increases between the initial and follow-up surveys in the number of respondents who reported using strain typing (57.0% to 80.5%, p < 0.001) and the proportion of time health protection staff spent on investigating TB (2.74% to 7.08%, p = 0.04). Evaluation of a complex public health intervention is challenging. In this example, the immediate national roll-out of the TB-STS meant that a controlled survey design was not possible. This study informs the future development of the TB-STS by identifying the need for training to reach wider professional groups, and argues for its continuation based on service users' perception that it is useful. By highlighting the importance of a well-defined sampling frame, collecting baseline information, and including all stakeholders, it provides lessons for the implementation of similar services in other countries and future evaluations of public health interventions.

Challenges in recruitment and retention of clinical trial subjects.

PubMed

Kadam, Rashmi Ashish; Borde, Sanghratna Umakant; Madas, Sapna Amol; Salvi, Sundeep Santosh; Limaye, Sneha Saurabh

2016-01-01

Successful recruitment of patients is known to be one of the most challenging aspects in conduct of randomized controlled trials. Inadequate patient retention during conduct of trial affects conclusive results. To assess the level of challenges faced by Indian investigators in recruitment and retention of trial subjects. We developed a survey questionnaire on challenges encountered by investigators in subject recruitment and retention which was hosted on a web portal. Seventy-three investigators from India participated in the survey. The frequently encountered challenges in subject recruitment were complexity of study protocol (38%), lack of awareness about clinical trials in patients (37%), and sociocultural issues related to trial participation (37%). About 63% of participants strongly agreed that creating a positive awareness about clinical trials among people through press and media, having a dedicated clinical research coordinator for trial (50.7%), and designing a recruitment strategy prior to study initiation (46.6%) would enhance recruitment. Almost 50.7% of participants agreed that interacting with medical community in vicinity of the study site and educating patients about clinical trials during routine outpatient department visits (46.6%) would enhance recruitment. Experiencing a serious adverse event, subject's fear for study procedures (47%) and side effects (44%) were thought to have a moderate effect on subject retention. Our survey has put forth factors related to negative publicity by media, lack of patient education about clinical trials; complex study designs are barriers to clinical trial recruitment in India. It is essential to devise innovative and effective strategies focusing on education of public and mass media about clinical research in India.

Climate Change Impacts and Vulnerability Assessment in Industrial Complexes

NASA Astrophysics Data System (ADS)

Lee, H. J.; Lee, D. K.

2016-12-01

Climate change has recently caused frequent natural disasters, such as floods, droughts, and heat waves. Such disasters have also increased industrial damages. We must establish climate change adaptation policies to reduce the industrial damages. It is important to make accurate vulnerability assessment to establish climate change adaptation policies. Thus, this study aims at establishing a new index to assess vulnerability level in industrial complexes. Most vulnerability indices have been developed with subjective approaches, such as the Delphi survey and the Analytic Hierarchy Process(AHP). The subjective approaches rely on the knowledge of a few experts, which provokes the lack of the reliability of the indices. To alleviate the problem, we have designed a vulnerability index incorporating objective approaches. We have investigated 42 industrial complex sites in Republic of Korea (ROK). To calculate weights of variables, we used entropy method as an objective method integrating the Delphi survey as a subjective method. Finally, we found our method integrating both subjective method and objective method could generate result. The integration of the entropy method enables us to assess the vulnerability objectively. Our method will be useful to establish climate change adaptation policies by reducing the uncertainties of the methods based on the subjective approaches.

Complexity Survey.

ERIC Educational Resources Information Center

Gordon, Sandra L.; Anderson, Beth C.

To determine whether consensus existed among teachers about the complexity of common classroom materials, a survey was administered to 66 pre-service and in-service kindergarten and prekindergarten teachers. Participants were asked to rate 14 common classroom materials as simple, complex, or super-complex. Simple materials have one obvious part,…

What evidence and support do state-level public health practitioners need to address obesity prevention.

PubMed

Leeman, Jennifer; Teal, Randall; Jernigan, Jan; Reed, Jenica Huddleston; Farris, Rosanne; Ammerman, Alice

2014-01-01

Obesity has reached epidemic proportions. Public health practitioners are distinctly positioned to promote the environmental changes essential to addressing obesity. The Centers for Disease Control and Prevention (CDC) and other entities provide evidence and technical assistance to support this work, yet little is known about how practitioners use evidence and support as they intervene to prevent obesity. The study's purpose was to describe how practitioners and CDC project officers characterized the obesity prevention task, where practitioners accessed support and evidence, and what approaches to support and evidence they found most useful. APPROACH OR DESIGN: Mixed-methods, cross-sectional interviews, and survey. State-level public health obesity prevention programs. Public health practitioners and CDC project officers. We conducted 10 in-depth interviews with public health practitioners (n = 7) and project officers (n = 3) followed by an online survey completed by 62 practitioners (50% response rate). We applied content analysis to interview data and descriptive statistics to survey data. Practitioners characterized obesity prevention as uncertain and complex, involving interdependence among actors, multiple levels of activity, an excess of information, and a paucity of evidence. Survey findings provide further detail on the types of evidence and support practitioners used and valued. We recommend approaches to tailoring evidence and support to the needs of practitioners working on obesity prevention and other complex health problems.

Evaluation of alternative school feeding models on nutrition, education, agriculture and other social outcomes in Ghana: rationale, randomised design and baseline data.

PubMed

Gelli, Aulo; Masset, Edoardo; Folson, Gloria; Kusi, Anthoni; Arhinful, Daniel K; Asante, Felix; Ayi, Irene; Bosompem, Kwabena M; Watkins, Kristie; Abdul-Rahman, Lutuf; Agble, Rosanna; Ananse-Baden, Getrude; Mumuni, Daniel; Aurino, Elisabetta; Fernandes, Meena; Drake, Lesley

2016-01-20

'Home-grown' school feeding programmes are complex interventions with the potential to link the increased demand for school feeding goods and services to community-based stakeholders, including smallholder farmers and women's groups. There is limited rigorous evidence, however, that this is the case in practice. This evaluation will examine explicitly, and from a holistic perspective, the simultaneous impact of a national school meals programme on micronutrient status, alongside outcomes in nutrition, education and agriculture domains. The 3-year study involves a cluster-randomised control trial designed around the scale-up of the national school feeding programme, including 116 primary schools in 58 districts in Ghana. The randomly assigned interventions are: 1) a school feeding programme group, including schools and communities where the standard government programme is implemented; 2) 'home-grown' school feeding, including schools and communities where the standard programme is implemented alongside an innovative pilot project aimed at enhancing nutrition and agriculture; and 3) a control group, including schools and households from communities where the intervention will be delayed by at least 3 years, preferably without informing schools and households. Primary outcomes include child health and nutritional status, school participation and learning, and smallholder farmer income. Intermediate outcomes along the agriculture and nutrition pathways will also be measured. The evaluation will follow a mixed-method approach, including child-, household-, school- and community-level surveys as well as focus group discussions with project stakeholders. The baseline survey was completed in August 2013 and the endline survey is planned for November 2015. The tests of balance show significant differences in the means of a number of outcome and control variables across the intervention groups. Important differences across groups include marketed surplus, livestock income, per capita food consumption and intake, school attendance, and anthropometric status in the 2-5 and 5-15 years age groups. In addition, approximately 19 % of children in the target age group received some form of free school meals at baseline. Designing and implementing the evaluation of complex interventions is in itself a complex undertaking, involving a multi-disciplinary research team working in close collaboration with programme- and policy-level stakeholders. Managing the complexity from an analytical and operational perspective is an important challenge. The analysis of the baseline data indicates that the random allocation process did not achieve statistically comparable treatment groups. Differences in outcomes and control variables across groups will be controlled for when estimating treatment effects. ISRCTN66918874 (registered on 5 March 2015).

Use of computational modeling combined with advanced visualization to develop strategies for the design of crop ideotypes to address food security

DOE PAGES

Christensen, A. J.; Srinivasan, V.; Hart, J. C.; ...

2018-03-17

Sustainable crop production is a contributing factor to current and future food security. Innovative technologies are needed to design strategies that will achieve higher crop yields on less land and with fewer resources. Computational modeling coupled with advanced scientific visualization enables researchers to explore and interact with complex agriculture, nutrition, and climate data to predict how crops will respond to untested environments. These virtual observations and predictions can direct the development of crop ideotypes designed to meet future yield and nutritional demands. This review surveys modeling strategies for the development of crop ideotypes and scientific visualization technologies that have ledmore » to discoveries in “big data” analysis. Combined modeling and visualization approaches have been used to realistically simulate crops and to guide selection that immediately enhances crop quantity and quality under challenging environmental conditions. Lastly, this survey of current and developing technologies indicates that integrative modeling and advanced scientific visualization may help overcome challenges in agriculture and nutrition data as large-scale and multidimensional data become available in these fields.« less

Use of computational modeling combined with advanced visualization to develop strategies for the design of crop ideotypes to address food security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christensen, A. J.; Srinivasan, V.; Hart, J. C.

Sustainable crop production is a contributing factor to current and future food security. Innovative technologies are needed to design strategies that will achieve higher crop yields on less land and with fewer resources. Computational modeling coupled with advanced scientific visualization enables researchers to explore and interact with complex agriculture, nutrition, and climate data to predict how crops will respond to untested environments. These virtual observations and predictions can direct the development of crop ideotypes designed to meet future yield and nutritional demands. This review surveys modeling strategies for the development of crop ideotypes and scientific visualization technologies that have ledmore » to discoveries in “big data” analysis. Combined modeling and visualization approaches have been used to realistically simulate crops and to guide selection that immediately enhances crop quantity and quality under challenging environmental conditions. Lastly, this survey of current and developing technologies indicates that integrative modeling and advanced scientific visualization may help overcome challenges in agriculture and nutrition data as large-scale and multidimensional data become available in these fields.« less

Use of computational modeling combined with advanced visualization to develop strategies for the design of crop ideotypes to address food security.

PubMed

Christensen, A J; Srinivasan, Venkatraman; Hart, John C; Marshall-Colon, Amy

2018-05-01

Sustainable crop production is a contributing factor to current and future food security. Innovative technologies are needed to design strategies that will achieve higher crop yields on less land and with fewer resources. Computational modeling coupled with advanced scientific visualization enables researchers to explore and interact with complex agriculture, nutrition, and climate data to predict how crops will respond to untested environments. These virtual observations and predictions can direct the development of crop ideotypes designed to meet future yield and nutritional demands. This review surveys modeling strategies for the development of crop ideotypes and scientific visualization technologies that have led to discoveries in "big data" analysis. Combined modeling and visualization approaches have been used to realistically simulate crops and to guide selection that immediately enhances crop quantity and quality under challenging environmental conditions. This survey of current and developing technologies indicates that integrative modeling and advanced scientific visualization may help overcome challenges in agriculture and nutrition data as large-scale and multidimensional data become available in these fields.

Use of computational modeling combined with advanced visualization to develop strategies for the design of crop ideotypes to address food security

PubMed Central

Christensen, A J; Srinivasan, Venkatraman; Hart, John C; Marshall-Colon, Amy

2018-01-01

Abstract Sustainable crop production is a contributing factor to current and future food security. Innovative technologies are needed to design strategies that will achieve higher crop yields on less land and with fewer resources. Computational modeling coupled with advanced scientific visualization enables researchers to explore and interact with complex agriculture, nutrition, and climate data to predict how crops will respond to untested environments. These virtual observations and predictions can direct the development of crop ideotypes designed to meet future yield and nutritional demands. This review surveys modeling strategies for the development of crop ideotypes and scientific visualization technologies that have led to discoveries in “big data” analysis. Combined modeling and visualization approaches have been used to realistically simulate crops and to guide selection that immediately enhances crop quantity and quality under challenging environmental conditions. This survey of current and developing technologies indicates that integrative modeling and advanced scientific visualization may help overcome challenges in agriculture and nutrition data as large-scale and multidimensional data become available in these fields. PMID:29562368

Accessing VA Healthcare During Large-Scale Natural Disasters.

PubMed

Der-Martirosian, Claudia; Pinnock, Laura; Dobalian, Aram

2017-01-01

Natural disasters can lead to the closure of medical facilities including the Veterans Affairs (VA), thus impacting access to healthcare for U.S. military veteran VA users. We examined the characteristics of VA patients who reported having difficulty accessing care if their usual source of VA care was closed because of natural disasters. A total of 2,264 veteran VA users living in the U.S. northeast region participated in a 2015 cross-sectional representative survey. The study used VA administrative data in a complex stratified survey design with a multimode approach. A total of 36% of veteran VA users reported having difficulty accessing care elsewhere, negatively impacting the functionally impaired and lower income VA patients.

When Theater Comes to Engineering Design: Oh How Creative They Can Be.

PubMed

Pfeiffer, Ferris M; Bauer, Rachel E; Borgelt, Steve; Burgoyne, Suzanne; Grant, Sheila; Hunt, Heather K; Pardoe, Jennie J; Schmidt, David C

2017-07-01

The creative process is fun, complex, and sometimes frustrating, but it is critical to the future of our nation and progress in science, technology, engineering, mathematics (STEM), as well as other fields. Thus, we set out to see if implementing methods of active learning typical to the theater department could impact the creativity of senior capstone design students in the bioengineering (BE) department. Senior bioengineering capstone design students were allowed to self-select into groups. Prior to the beginning of coursework, all students completed a validated survey measuring engineering design self-efficacy. The control and experimental groups both received standard instruction, but in addition the experimental group received 1 h per week of creativity training developed by a theater professor. Following the semester, the students again completed the self-efficacy survey. The surveys were examined to identify differences in the initial and final self-efficacy in the experimental and control groups over the course of the semester. An analysis of variance was used to compare the experimental and control groups with p < 0.05 considered significant. Students in the experimental group reported more than a twofold (4.8 (C) versus 10.9 (E)) increase of confidence. Additionally, students in the experimental group were more motivated and less anxious when engaging in engineering design following the semester of creativity instruction. The results of this pilot study indicate that there is a significant potential to improve engineering students' creative self-efficacy through the implementation of a "curriculum of creativity" which is developed using theater methods.

Multiple Imputation in Two-Stage Cluster Samples Using The Weighted Finite Population Bayesian Bootstrap.

PubMed

Zhou, Hanzhi; Elliott, Michael R; Raghunathan, Trivellore E

2016-06-01

Multistage sampling is often employed in survey samples for cost and convenience. However, accounting for clustering features when generating datasets for multiple imputation is a nontrivial task, particularly when, as is often the case, cluster sampling is accompanied by unequal probabilities of selection, necessitating case weights. Thus, multiple imputation often ignores complex sample designs and assumes simple random sampling when generating imputations, even though failing to account for complex sample design features is known to yield biased estimates and confidence intervals that have incorrect nominal coverage. In this article, we extend a recently developed, weighted, finite-population Bayesian bootstrap procedure to generate synthetic populations conditional on complex sample design data that can be treated as simple random samples at the imputation stage, obviating the need to directly model design features for imputation. We develop two forms of this method: one where the probabilities of selection are known at the first and second stages of the design, and the other, more common in public use files, where only the final weight based on the product of the two probabilities is known. We show that this method has advantages in terms of bias, mean square error, and coverage properties over methods where sample designs are ignored, with little loss in efficiency, even when compared with correct fully parametric models. An application is made using the National Automotive Sampling System Crashworthiness Data System, a multistage, unequal probability sample of U.S. passenger vehicle crashes, which suffers from a substantial amount of missing data in "Delta-V," a key crash severity measure.

Multiple Imputation in Two-Stage Cluster Samples Using The Weighted Finite Population Bayesian Bootstrap

PubMed Central

Zhou, Hanzhi; Elliott, Michael R.; Raghunathan, Trivellore E.

2017-01-01

Multistage sampling is often employed in survey samples for cost and convenience. However, accounting for clustering features when generating datasets for multiple imputation is a nontrivial task, particularly when, as is often the case, cluster sampling is accompanied by unequal probabilities of selection, necessitating case weights. Thus, multiple imputation often ignores complex sample designs and assumes simple random sampling when generating imputations, even though failing to account for complex sample design features is known to yield biased estimates and confidence intervals that have incorrect nominal coverage. In this article, we extend a recently developed, weighted, finite-population Bayesian bootstrap procedure to generate synthetic populations conditional on complex sample design data that can be treated as simple random samples at the imputation stage, obviating the need to directly model design features for imputation. We develop two forms of this method: one where the probabilities of selection are known at the first and second stages of the design, and the other, more common in public use files, where only the final weight based on the product of the two probabilities is known. We show that this method has advantages in terms of bias, mean square error, and coverage properties over methods where sample designs are ignored, with little loss in efficiency, even when compared with correct fully parametric models. An application is made using the National Automotive Sampling System Crashworthiness Data System, a multistage, unequal probability sample of U.S. passenger vehicle crashes, which suffers from a substantial amount of missing data in “Delta-V,” a key crash severity measure. PMID:29226161

Lost in the crowd? Using eye-tracking to investigate the effect of complexity on attribute non-attendance in discrete choice experiments.

PubMed

Spinks, Jean; Mortimer, Duncan

2016-02-03

The provision of additional information is often assumed to improve consumption decisions, allowing consumers to more accurately weigh the costs and benefits of alternatives. However, increasing the complexity of decision problems may prompt changes in information processing. This is particularly relevant for experimental methods such as discrete choice experiments (DCEs) where the researcher can manipulate the complexity of the decision problem. The primary aims of this study are (i) to test whether consumers actually process additional information in an already complex decision problem, and (ii) consider the implications of any such 'complexity-driven' changes in information processing for design and analysis of DCEs. A discrete choice experiment (DCE) is used to simulate a complex decision problem; here, the choice between complementary and conventional medicine for different health conditions. Eye-tracking technology is used to capture the number of times and the duration that a participant looks at any part of a computer screen during completion of DCE choice sets. From this we can analyse what has become known in the DCE literature as 'attribute non-attendance' (ANA). Using data from 32 participants, we model the likelihood of ANA as a function of choice set complexity and respondent characteristics using fixed and random effects models to account for repeated choice set completion. We also model whether participants are consistent with regard to which characteristics (attributes) they consider across choice sets. We find that complexity is the strongest predictor of ANA when other possible influences, such as time pressure, ordering effects, survey specific effects and socio-demographic variables (including proxies for prior experience with the decision problem) are considered. We also find that most participants do not apply a consistent information processing strategy across choice sets. Eye-tracking technology shows promise as a way of obtaining additional information from consumer research, improving DCE design, and informing the design of policy measures. With regards to DCE design, results from the present study suggest that eye-tracking data can identify the point at which adding complexity (and realism) to DCE choice scenarios becomes self-defeating due to unacceptable increases in ANA. Eye-tracking data therefore has clear application in the construction of guidelines for DCE design and during piloting of DCE choice scenarios. With regards to design of policy measures such as labelling requirements for CAM and conventional medicines, the provision of additional information has the potential to make difficult decisions even harder and may not have the desired effect on decision-making.

Hierarchical star formation across the grand-design spiral NGC 1566

NASA Astrophysics Data System (ADS)

Gouliermis, Dimitrios A.; Elmegreen, Bruce G.; Elmegreen, Debra M.; Calzetti, Daniela; Cignoni, Michele; Gallagher, John S., III; Kennicutt, Robert C.; Klessen, Ralf S.; Sabbi, Elena; Thilker, David; Ubeda, Leonardo; Aloisi, Alessandra; Adamo, Angela; Cook, David O.; Dale, Daniel; Grasha, Kathryn; Grebel, Eva K.; Johnson, Kelsey E.; Sacchi, Elena; Shabani, Fayezeh; Smith, Linda J.; Wofford, Aida

2017-06-01

We investigate how star formation is spatially organized in the grand-design spiral NGC 1566 from deep Hubble Space Telescope photometry with the Legacy ExtraGalactic UV Survey. Our contour-based clustering analysis reveals 890 distinct stellar conglomerations at various levels of significance. These star-forming complexes are organized in a hierarchical fashion with the larger congregations consisting of smaller structures, which themselves fragment into even smaller and more compact stellar groupings. Their size distribution, covering a wide range in length-scales, shows a power law as expected from scale-free processes. We explain this shape with a simple 'fragmentation and enrichment' model. The hierarchical morphology of the complexes is confirmed by their mass-size relation that can be represented by a power law with a fractional exponent, analogous to that determined for fractal molecular clouds. The surface stellar density distribution of the complexes shows a lognormal shape similar to that for supersonic non-gravitating turbulent gas. Between 50 and 65 per cent of the recently formed stars, as well as about 90 per cent of the young star clusters, are found inside the stellar complexes, located along the spiral arms. We find an age difference between young stars inside the complexes and those in their direct vicinity in the arms of at least 10 Myr. This time-scale may relate to the minimum time for stellar evaporation, although we cannot exclude the in situ formation of stars. As expected, star formation preferentially occurs in spiral arms. Our findings reveal turbulent-driven hierarchical star formation along the arms of a grand-design galaxy.

Agency, access, and Anopheles: neighborhood health perceptions and the implications for community health interventions in Accra, Ghana

PubMed Central

Jankowska, Marta M.; Stoler, Justin; Ofiesh, Caetlin; Rain, David; Weeks, John R.

2015-01-01

Background Social and environmental factors are increasingly recognized for their ability to influence health outcomes at both individual and neighborhood scales in the developing urban world. Yet issues of spatial heterogeneity in these complex environments may obscure unique elements of neighborhood life that may be protective or harmful to human health. Resident perceptions of neighborhood effects on health may help to fill gaps in our interpretation of household survey results and better inform how to plan and execute neighborhood-level health interventions. Objective We evaluate differences in housing and socioeconomic indicators and health, environment, and neighborhood perceptions derived from the analysis of a household survey and a series of focus groups in Accra, Ghana. We then explore how neighborhood perceptions can inform survey results and ultimately neighborhood-level health interventions. Design Eleven focus groups were conducted across a socioeconomically stratified sample of neighborhoods in Accra, Ghana. General inductive themes from the focus groups were analyzed in tandem with data collected in a 2009 household survey of 2,814 women. In-depth vignettes expand upon the three most salient emergent themes. Results Household and socioeconomic characteristics derived from the focus groups corroborated findings from the survey data. Focus group and survey results diverged for three complex health issues: malaria, health-care access, and sense of personal agency in promoting good health. Conclusion Three vignettes reflecting community views about malaria, health-care access, and sense of personal agency in promoting good health highlight the challenges facing community health interventions in Accra and exemplify how qualitatively derived neighborhood-level health effects can help shape health interventions. PMID:25997424

Completion of a Liver Surgery Complexity Score and Classification Based on an International Survey of Experts.

PubMed

Lee, Major K; Gao, Feng; Strasberg, Steven M

2016-08-01

Liver resections have classically been distinguished as "minor" or "major," based on number of segments removed. This is flawed because the number of segments resected alone does not convey the complexity of a resection. We recently developed a 3-tiered classification for the complexity of liver resections based on utility weighting by experts. This study aims to complete the earlier classification and to illustrate its application. Two surveys were administered to expert liver surgeons. Experts were asked to rate the difficulty of various open liver resections on a scale of 1 to 10. Statistical methods were then used to develop a complexity score for each procedure. Sixty-six of 135 (48.9%) surgeons responded to the earlier survey, and 66 of 122 (54.1%) responded to the current survey. In all, 19 procedures were rated. The lowest mean score of 1.36 (indicating least difficult) was given to peripheral wedge resection. Right hepatectomy with IVC reconstruction was deemed most difficult, with a score of 9.35. Complexity scores were similar for 9 procedures present in both surveys. Caudate resection, hepaticojejunostomy, and vascular reconstruction all increased the complexity of standard resections significantly. These data permit quantitative assessment of the difficulty of a variety of liver resections. The complexity scores generated allow for separation of liver resections into 3 categories of complexity (low complexity, medium complexity, and high complexity) on a quantitative basis. This provides a more accurate representation of the complexity of procedures in comparative studies. Copyright © 2016 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

It's all about balance: propensity score matching in the context of complex survey data.

PubMed

Lenis, David; Nguyen, Trang Quynh; Dong, Nianbo; Stuart, Elizabeth A

2017-12-27

Many research studies aim to draw causal inferences using data from large, nationally representative survey samples, and many of these studies use propensity score matching to make those causal inferences as rigorous as possible given the non-experimental nature of the data. However, very few applied studies are careful about incorporating the survey design with the propensity score analysis, which may mean that the results do not generate population inferences. This may be because few methodological studies examine how to best combine these methods. Furthermore, even fewer of them investigate different non-response mechanisms. This study examines methods for handling survey weights in propensity score matching analyses of survey data under different non-response mechanisms. Our main conclusions are: (i) whether the survey weights are incorporated in the estimation of the propensity score does not impact estimation of the population treatment effect, as long as good population treated-comparison balance is achieved on confounders, (ii) survey weights must be used in the outcome analysis, and (iii) the transferring of survey weights (i.e., assigning the weights of the treated units to the comparison units matched to them) can be beneficial under certain non-response mechanisms. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Do physical environmental changes make a difference? Supporting person-centered care at mealtimes in nursing homes.

PubMed

Chaudhury, Habib; Hung, Lillian; Rust, Tiana; Wu, Sarah

2017-10-01

Purpose Drawing on therapeutic physical environmental design principles and Kitwood's theoretical view of person-centered care, this study examined the impact of environmental renovations in dining spaces of a long-term care facility on residents' mealtime experience and staff practice in two care units. Method The research design involved pre- and post-renovation ethnographic observations in the dining spaces of the care units and a post-renovation staff survey. The objective physical environmental features pre- and post-renovations were assessed with a newly developed tool titled Dining Environment Audit Protocol. We collected observational data from 10 residents and survey responses from 17 care aides and nurses. Findings Based on a systematic analysis of observational data and staff survey responses, five themes were identified: (a) autonomy and personal control, (b) comfort of homelike environment, (c) conducive to social interaction, (d) increased personal support, and (e) effective teamwork. Implications Although the physical environment can play an influential role in enhancing the dining experience of residents, the variability in staff practices reveals the complexity of mealtime environment and points to the necessity of a systemic approach to foster meaningful culture change.

Design, implementation, and demographic differences of HEAL: a self-report health care leadership instrument

PubMed Central

Murphy, Kelly R; McManigle, John E; Wildman-Tobriner, Benjamin M; Little Jones, Amy; Dekker, Travis J; Little, Barrett A; Doty, Joseph P; Taylor, Dean C

2016-01-01

The medical community has recognized the importance of leadership skills among its members. While numerous leadership assessment tools exist at present, few are specifically tailored to the unique health care environment. The study team designed a 24-item survey (Healthcare Evaluation & Assessment of Leadership [HEAL]) to measure leadership competency based on the core competencies and core principles of the Duke Healthcare Leadership Model. A novel digital platform was created for use on handheld devices to facilitate its distribution and completion. This pilot phase involved 126 health care professionals self-assessing their leadership abilities. The study aimed to determine both the content validity of the survey and the feasibility of its implementation and use. The digital platform for survey implementation was easy to complete, and there were no technical problems with survey use or data collection. With regard to reliability, initial survey results revealed that each core leadership tenet met or exceeded the reliability cutoff of 0.7. In self-assessment of leadership, women scored themselves higher than men in questions related to patient centeredness (P=0.016). When stratified by age, younger providers rated themselves lower with regard to emotional intelligence and integrity. There were no differences in self-assessment when stratified by medical specialty. While only a pilot study, initial data suggest that HEAL is a reliable and easy-to-administer survey for health care leadership assessment. Differences in responses by sex and age with respect to patient centeredness, integrity, and emotional intelligence raise questions about how providers view themselves amid complex medical teams. As the survey is refined and further administered, HEAL will be used not only as a self-assessment tool but also in “360” evaluation formats. PMID:29355186

Design, implementation, and demographic differences of HEAL: a self-report health care leadership instrument.

PubMed

Murphy, Kelly R; McManigle, John E; Wildman-Tobriner, Benjamin M; Little Jones, Amy; Dekker, Travis J; Little, Barrett A; Doty, Joseph P; Taylor, Dean C

2016-01-01

The medical community has recognized the importance of leadership skills among its members. While numerous leadership assessment tools exist at present, few are specifically tailored to the unique health care environment. The study team designed a 24-item survey (Healthcare Evaluation & Assessment of Leadership [HEAL]) to measure leadership competency based on the core competencies and core principles of the Duke Healthcare Leadership Model. A novel digital platform was created for use on handheld devices to facilitate its distribution and completion. This pilot phase involved 126 health care professionals self-assessing their leadership abilities. The study aimed to determine both the content validity of the survey and the feasibility of its implementation and use. The digital platform for survey implementation was easy to complete, and there were no technical problems with survey use or data collection. With regard to reliability, initial survey results revealed that each core leadership tenet met or exceeded the reliability cutoff of 0.7. In self-assessment of leadership, women scored themselves higher than men in questions related to patient centeredness ( P =0.016). When stratified by age, younger providers rated themselves lower with regard to emotional intelligence and integrity. There were no differences in self-assessment when stratified by medical specialty. While only a pilot study, initial data suggest that HEAL is a reliable and easy-to-administer survey for health care leadership assessment. Differences in responses by sex and age with respect to patient centeredness, integrity, and emotional intelligence raise questions about how providers view themselves amid complex medical teams. As the survey is refined and further administered, HEAL will be used not only as a self-assessment tool but also in "360" evaluation formats.

The 2003 Australian Breast Health Survey: survey design and preliminary results.

PubMed

Villanueva, Elmer V; Jones, Sandra; Nehill, Caroline; Favelle, Simone; Steel, David; Iverson, Donald; Zorbas, Helen

2008-01-14

The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC) in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. The 2003 BHS surveyed English-speaking Australian women aged 30-69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Of the 3,144 respondents who consented to being interviewed, 138 (4.4%) had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1%) reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9%) had heard of the BreastScreen Australia (BSA) program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. The NBCC Breast Health Surveys provide a valuable picture of the knowledge of Australian women about a range of issues. The present analysis shows significant gains in knowledge and behaviours relating to mammographic screening, while identifying additional areas for targeted improvement, as in the need to better communicate with women about screening and diagnostic services. Further analysis of additional core topic areas (eg., incidence, mortality, risk and treatment) will provide equally noteworthy insight.

Implementation of a Care Pathway for Primary Palliative Care in 5 research clusters in Belgium: quasi-experimental study protocol and innovations in data collection (pro-SPINOZA).

PubMed

Leysen, Bert; Van den Eynden, Bart; Gielen, Birgit; Bastiaens, Hilde; Wens, Johan

2015-09-28

Starting with early identification of palliative care patients by general practitioners (GPs), the Care Pathway for Primary Palliative Care (CPPPC) is believed to help primary health care workers to deliver patient- and family-centered care in the last year of life. The care pathway has been pilot-tested, and will now be implemented in 5 Belgian regions: 2 Dutch-speaking regions, 2 French-speaking regions and the bilingual capital region of Brussels. The overall aim of the CPPPC is to provide better quality of primary palliative care, and in the end to reduce the hospital death rate. The aim of this article is to describe the quantitative design and innovative data collection strategy used in the evaluation of this complex intervention. A quasi-experimental stepped wedge cluster design is set up with the 5 regions being 5 non-randomized clusters. The primary outcome is reduced hospital death rate per GPs' patient population. Secondary outcomes are increased death at home and health care consumption patterns suggesting high quality palliative care. Per research cluster, GPs will be recruited via convenience sampling. These GPs -volunteering to be involved will recruit people with reduced life expectancy and their informal care givers. Health care consumption data in the last year of life, available for all deceased people having lived in the research clusters in the study period, will be used for comparison between patient populations of participating GPs and patient populations of non-participating GPs. Description of baseline characteristics of participating GPs and patients and monitoring of the level of involvement by GPs, patients and informal care givers will happen through regular, privacy-secured web-surveys. Web-survey data and health consumption data are linked in a secure way, respecting Belgian privacy laws. To evaluate this complex intervention, a quasi-experimental stepped wedge cluster design has been set up. Context characteristics and involvement level of participants are important parameters in evaluating complex interventions. It is possible to securely link survey data with health consumption data. By appealing to IT solutions we hope to be able to partly reduce respondent burden, a known problem in palliative care research. ClinicalTrials.gov Identifier: NCT02266069.

Advanced Representation Technologies Applied to the Temple of Neptune, the Sphinx and the Metope in the Archaeological Park of Paestum

NASA Astrophysics Data System (ADS)

Cardinale, T.; Valva, R.; Lucarelli, M.

2013-02-01

The Summer School of Surveying and 3D modelling in Paestum was an opportunity to explore the use of innovative tools and advanced techniques in the design, implementation and management of surveys of historic and artistic complexes. In general such methods are used specifically for the development and management of vulnerability maps of existing heritage and so for the preventive conservation and valorisation of the built environment. The accurate detection of risk situations and the systematic promotion of highly selected and minimally invasive maintenance practices means that restoration and the efficiency of cycles of intervention can be optimized, with clear benefits from economic and cultural points of view. The group worked on the survey and 3D modelling of the Temple of Neptune, the Sphinx and the Metope of the Archaeological Park in Paestum.

The LSST OCS scheduler design

NASA Astrophysics Data System (ADS)

Delgado, Francisco; Schumacher, German

2014-08-01

The Large Synoptic Survey Telescope (LSST) is a complex system of systems with demanding performance and operational requirements. The nature of its scientific goals requires a special Observatory Control System (OCS) and particularly a very specialized automatic Scheduler. The OCS Scheduler is an autonomous software component that drives the survey, selecting the detailed sequence of visits in real time, taking into account multiple science programs, the current external and internal conditions, and the history of observations. We have developed a SysML model for the OCS Scheduler that fits coherently in the OCS and LSST integrated model. We have also developed a prototype of the Scheduler that implements the scheduling algorithms in the simulation environment provided by the Operations Simulator, where the environment and the observatory are modeled with real weather data and detailed kinematics parameters. This paper expands on the Scheduler architecture and the proposed algorithms to achieve the survey goals.

Ontology patterns for complex topographic feature yypes

USGS Publications Warehouse

Varanka, Dalia E.

2011-01-01

Complex feature types are defined as integrated relations between basic features for a shared meaning or concept. The shared semantic concept is difficult to define in commonly used geographic information systems (GIS) and remote sensing technologies. The role of spatial relations between complex feature parts was recognized in early GIS literature, but had limited representation in the feature or coverage data models of GIS. Spatial relations are more explicitly specified in semantic technology. In this paper, semantics for topographic feature ontology design patterns (ODP) are developed as data models for the representation of complex features. In the context of topographic processes, component assemblages are supported by resource systems and are found on local landscapes. The topographic ontology is organized across six thematic modules that can account for basic feature types, resource systems, and landscape types. Types of complex feature attributes include location, generative processes and physical description. Node/edge networks model standard spatial relations and relations specific to topographic science to represent complex features. To demonstrate these concepts, data from The National Map of the U. S. Geological Survey was converted and assembled into ODP.

Analyzing Complex Survey Data.

ERIC Educational Resources Information Center

Rodgers-Farmer, Antoinette Y.; Davis, Diane

2001-01-01

Uses data from the 1994 AIDS Knowledge and Attitudes Supplement to the National Health Interview Survey (NHIS) to illustrate that biased point estimates, inappropriate standard errors, and misleading tests of significance can result from using traditional software packages, such as SPSS or SAS, for complex survey analysis. (BF)

Survey of Aerothermodynamics Facilities Useful for the Design of Hypersonic Vehicles Using Air-Breathing Propulsion

NASA Technical Reports Server (NTRS)

Arnold, James O.; Deiwert, George S.

1997-01-01

This paper surveys the use of aerothermodynamic facilities which have been useful in the study of external flows and propulsion aspects of hypersonic, air-breathing vehicles. While the paper is not a survey of all facilities, it covers the utility of shock tunnels and conventional hypersonic blow-down facilities which have been used for hypersonic air-breather studies. The problems confronting researchers in the field of aerothermodynamics are outlined. Results from the T5 GALCIT tunnel for the shock-on lip problem are outlined. Experiments on combustors and short expansion nozzles using the semi-free jet method have been conducted in large shock tunnels. An example which employed the NASA Ames 16-Inch shock tunnel is outlined, and the philosophy of the test technique is described. Conventional blow-down hypersonic wind tunnels are quite useful in hypersonic air-breathing studies. Results from an expansion ramp experiment, simulating the nozzle on a hypersonic air-breather from the NASA Ames 3.5 Foot Hypersonic wind tunnel are summarized. Similar work on expansion nozzles conducted in the NASA Langley hypersonic wind tunnel complex is cited. Free-jet air-frame propulsion integration and configuration stability experiments conducted at Langley in the hypersonic wind tunnel complex on a small generic model are also summarized.

Wind speed statistics for Goldstone, California, anemometer sites

NASA Technical Reports Server (NTRS)

Berg, M.; Levy, R.; Mcginness, H.; Strain, D.

1981-01-01

An exploratory wind survey at an antenna complex was summarized statistically for application to future windmill designs. Data were collected at six locations from a total of 10 anemometers. Statistics include means, standard deviations, cubes, pattern factors, correlation coefficients, and exponents for power law profile of wind speed. Curves presented include: mean monthly wind speeds, moving averages, and diurnal variation patterns. It is concluded that three of the locations have sufficiently strong winds to justify consideration for windmill sites.

A Survey of Current Russion RTG Capabilities

NASA Technical Reports Server (NTRS)

Chmielewski, A.; Borshchevsky, A.; Lange, R.; Cook, B.

1994-01-01

Supplying radioisotope thermoelectric generators (RTG) to American space missions became very complex. The process is marred by many obstacles: high cost, lack of new developments, difficult launch approval and NEPA compliance. At the same time there are many ambitious space missions for which an RTG would indisputably be the lightest, smallest and most robust power source. An American delegation investigated status of RTG production in Russia to decide if our product line could be supplemented by the Russian designs.

23 CFR 1340.11 - Post-approval alterations to survey design.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Post-approval alterations to survey design. 1340.11... Post-approval alterations to survey design. After NHTSA approval of a survey design, States shall submit for NHTSA approval any proposed alteration to their survey design, including, but not limited to...

23 CFR 1340.11 - Post-approval alterations to survey design.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Post-approval alterations to survey design. 1340.11... Post-approval alterations to survey design. After NHTSA approval of a survey design, States shall submit for NHTSA approval any proposed alteration to their survey design, including, but not limited to...

23 CFR 1340.11 - Post-approval alterations to survey design.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Post-approval alterations to survey design. 1340.11... Post-approval alterations to survey design. After NHTSA approval of a survey design, States shall submit for NHTSA approval any proposed alteration to their survey design, including, but not limited to...

Design of thermocouple probes for measurement of rocket exhaust plume temperatures

NASA Astrophysics Data System (ADS)

Warren, R. C.

1994-06-01

This paper summarizes a literature survey on high temperature measurement and describes the design of probes used in plume measurements. There were no cases reported of measurements in extreme environments such as exist in solid rocket exhausts, but there were a number of thermocouple designs which had been used under less extreme conditions and which could be further developed. Tungsten-rhenium(W-Rh) thermocouples had the combined properties of strength at high temperatures, high thermoelectric emf, and resistance to chemical attack. A shielded probe was required, both to protect the thermocouple junction, and to minimise radiative heat losses. After some experimentation, a twin shielded design made from molybdenum gave acceptable results. Corrections for thermal conduction losses were made based on a method obtained from the literature. Radiation losses were minimized with this probe design, and corrections for these losses were too complex and unreliable to be included.

Designing HIGH-COST Medicine Hospital Surveys, Health Planning, and the Paradox of Progressive Reform

PubMed Central

2010-01-01

Inspired by social medicine, some progressive US health reforms have paradoxically reinforced a business model of high-cost medical delivery that does not match social needs. In analyzing the financial status of their areas’ hospitals, for example, city-wide hospital surveys of the 1910s through 1930s sought to direct capital investments and, in so doing, control competition and markets. The 2 national health planning programs that ran from the mid-1960s to the mid-1980s continued similar strategies of economic organization and management, as did the so-called market reforms that followed. Consequently, these reforms promoted large, extremely specialized, capital-intensive institutions and systems at the expense of less complex (and less costly) primary and chronic care. The current capital crisis may expose the lack of sustainability of such a model and open up new ideas and new ways to build health care designed to meet people's health needs. PMID:20019312

Under the pile. Understanding subsurface dynamics of historical cities trough geophysical models interpretation

NASA Astrophysics Data System (ADS)

Bernardes, Paulo; Pereira, Bruno; Alves, Mafalda; Fontes, Luís; Sousa, Andreia; Martins, Manuela; Magalhães, Fernanda; Pimenta, Mário

2017-04-01

Braga is one of the oldest cities of the Iberian NW and as of so, the research team's studying the city's historical core for the past 40 years is often confronted with the unpredictability factor laying beneath an urban site with such a long construction history. In fact, Braga keeps redesigning its urban structure over itself on for the past 2000 years, leaving us with a research object filled with an impressive set of construction footprints from the various planning decisions that were taken in the city along its historical path. Aiming for a predicting understanding of the subsoil, we have used near surface geophysics as an effort of minimizing the areas of intervention for traditional archaeological survey techniques. The Seminário de Santiago integrated geophysical survey is an example of the difficulties of interpreting geophysical models in very complex subsurface scenarios. This geophysical survey was planned in order to aid the requalification project being designed for this set of historical buildings, that are estimated to date back to the 16h century, and that were built over one of the main urban arteries of both roman and medieval layers of Braga. We have used both GPR as well as ERT methods for the geophysical survey, but for the purpose of this article, we will focus in the use of the ERT alone. For the interpretation of the geophysical models we've cross-referenced the dense knowledge existing over the building's construction phases with the complex geophysical data collected, using mathematical processing and volume-based visualization techniques, resorting to the use of Res2Inv©, Paraview© and Voxler® software's. At the same time we tried to pinpoint the noise caused by the past 30 year's infrastructural interventions regarding the replacement of the building's water and sanitation systems and for which we had no design plants, regardless of its recent occurring. The deep impact of this replacement actions revealed by the archaeological trenches, which location was selected from the results of the geophysical models interpretation, revealed to be our main unpredictability factor and, paradoxically, one of its principal results, as it will allow us to be more interpretation efficient in future geophysical surveys in the historical core. As for so, at the present we are designing an integrated geophysical research programme that will hold Braga's historical subsurface as it's open lab, aiming to develop a tool not only for archeologists and geophysicists, but also and foremost to help the city planners to design more informed, efficient and sustainable urban plans for Braga, as the city is very much alive and continually keeps on adding new layers to its urban structure.

SIM Lite Astrometric Observatory progress report

NASA Astrophysics Data System (ADS)

Marr, James C., IV; Shao, Michael; Goullioud, Renaud

2010-07-01

The SIM Lite Astrometric Observatory (aka SIM Lite), a micro-arcsecond astrometry space mission, has been developed in response to NASA's indefinite deferral of the SIM PlanetQuest mission. The SIM Lite mission, while significantly more affordable than the SIM PlanetQuest mission concept, still addresses the full breadth of SIM science envisioned by two previous National Research Council (NRC) Astrophysics Decadal Surveys at the most stringent "Goal" level of astrometric measurement performance envisioned in those surveys. Over the past two years, the project has completed the conceptual design of the SIM Lite mission using only the completed SIM technology; published a 250 page book describing the science and mission design (available at the SIM website: http://sim.jpl.nasa.gov); been subject to an independent cost and technical readiness assessment by the Aerospace Corporation; and submitted a number of information responses to the NRC Astro2010 Decadal Survey. The project also conducted an exoplanet-finding capability double blind study that clearly demonstrated the ability of the mission to survey 60 to 100 nearby sun-like dwarf stars for terrestrial, habitable zone planets in complex planetary systems. Additionally, the project has continued Engineering Risk Reduction activities by building brassboard (form, fit & function to flight) version of key instrument elements and subjecting them to flight qualification environmental and performance testing. This paper summarizes the progress over the last two years and the current state of the SIM Lite project.

A DRDC Management Accountability Framework: Results of Cycle 2

DTIC Science & Technology

2009-09-01

Survey Instrument Design ...................................................................................................... 97 6.1 Cycle 2 Survey... Design ................................................................................................ 97 6.1.1 Pilot Survey 2 Design ...98 6.1.2 Pilot Survey 3 Design

Using iMCFA to Perform the CFA, Multilevel CFA, and Maximum Model for Analyzing Complex Survey Data.

PubMed

Wu, Jiun-Yu; Lee, Yuan-Hsuan; Lin, John J H

2018-01-01

To construct CFA, MCFA, and maximum MCFA with LISREL v.8 and below, we provide iMCFA (integrated Multilevel Confirmatory Analysis) to examine the potential multilevel factorial structure in the complex survey data. Modeling multilevel structure for complex survey data is complicated because building a multilevel model is not an infallible statistical strategy unless the hypothesized model is close to the real data structure. Methodologists have suggested using different modeling techniques to investigate potential multilevel structure of survey data. Using iMCFA, researchers can visually set the between- and within-level factorial structure to fit MCFA, CFA and/or MAX MCFA models for complex survey data. iMCFA can then yield between- and within-level variance-covariance matrices, calculate intraclass correlations, perform the analyses and generate the outputs for respective models. The summary of the analytical outputs from LISREL is gathered and tabulated for further model comparison and interpretation. iMCFA also provides LISREL syntax of different models for researchers' future use. An empirical and a simulated multilevel dataset with complex and simple structures in the within or between level was used to illustrate the usability and the effectiveness of the iMCFA procedure on analyzing complex survey data. The analytic results of iMCFA using Muthen's limited information estimator were compared with those of Mplus using Full Information Maximum Likelihood regarding the effectiveness of different estimation methods.

[Allergology in the public health service of the Community of Madrid: current situation and opportunities in the XXI century public health system].

PubMed

Domínguez-Ortega, J; Ruiz Hornillos, J; Chivato, T; De la Hoz, B; Elices, A; Iglesias, A; Quirce, S; Vega, F; Rodríguez Mosquera, M

2014-01-01

The high prevalence of allergic diseases and the use of more complex diagnostic techniques and therapeutic options require allergists to be highly trained professionals and health-care organizations to be knowledgeable about available structural and human resources. Updated information is lacking in Spain, and current activity indicators do not reflect complexity. The present article analyzes the situation of allergology in Madrid and proposes improvements where necessary. The heads of the allergy departments of public hospitals in Madrid voluntarily completed a purpose-designed survey. Data on care activity (2010) and on teaching and research activity (2009-2010) were provided. A SWOT analysis was performed, and strategic lines and proposals for improvement were designed. One hundred and seventeen allergists (41% with a PhD) worked in 24 hospitals with an allergology department (4.6 physicians/center; ≤3 in 10 hospitals). All the institutions had an outpatient clinic (4,000 first consultations/hospital/year, 36% high-resolution rate; 6200 successive visits/hospital/year) performing complex diagnostic and therapeutic procedures, most of which were not taken into account by activity indicators. Two hospitals had their own hospitalization facilities and 10 were accredited teaching hospitals (2.78 medical residents/year). The survey revealed that, twice yearly, a typical allergology service participated in 4 research projects, 2 clinical trials, 16 publications and 17 communications at scientific meetings, with notable differences between hospitals. Allergists in Madrid are well prepared. The allergology care structure is adequate, although possibly insufficient. Quality and efficiency can be improved with new tools for recording activity and by increasing coordination and taking advantage of new technologies and geographical proximity.

Operationalising elaboration theory for simulation instruction design: a Delphi study.

PubMed

Haji, Faizal A; Khan, Rabia; Regehr, Glenn; Ng, Gary; de Ribaupierre, Sandrine; Dubrowski, Adam

2015-06-01

The aim of this study was to assess the feasibility of incorporating the Delphi process within the simplifying conditions method (SCM) described in elaboration theory (ET) to identify conditions impacting the complexity of procedural skills for novice learners. We generated an initial list of conditions impacting the complexity of lumbar puncture (LP) from key informant interviews (n = 5) and a literature review. Eighteen clinician-educators from six different medical specialties were subsequently recruited as expert panellists. Over three Delphi rounds, these panellists rated: (i) their agreement with the inclusion of the simple version of the conditions in a representative ('epitome') training scenario, and (ii) how much the inverse (complex) version increases LP complexity for a novice. Cronbach's α-values were used to assess inter-rater agreement. All panellists completed Rounds 1 and 2 of the survey and 17 completed Round 3. In Round 1, Cronbach's α-values were 0.89 and 0.94 for conditions that simplify and increase LP complexity, respectively; both values increased to 0.98 in Rounds 2 and 3. With the exception of 'high CSF (cerebral spinal fluid) pressure', panellists agreed with the inclusion of all conditions in the simplest (epitome) training scenario. Panellists rated patient movement, spinal anatomy, patient cooperativeness, body habitus, and the presence or absence of an experienced assistant as having the greatest impact on the complexity of LP. This study demonstrated the feasibility of using expert consensus to establish conditions impacting the complexity of procedural skills, and the benefits of incorporating the Delphi method into the SCM. These data can be used to develop and sequence simulation scenarios in a progressively challenging manner. If the theorised learning gains associated with ET are realised, the methods described in this study may be applied to the design of simulation training for other procedural and non-procedural skills, thereby advancing the agenda of theoretically based instruction design in health care simulation. © 2015 John Wiley & Sons Ltd.

How to Identify Success Among Networks That Promote Active Living.

PubMed

Litt, Jill; Varda, Danielle; Reed, Hannah; Retrum, Jessica; Tabak, Rachel; Gustat, Jeanette; O'Hara Tompkins, Nancy

2015-11-01

We evaluated organization- and network-level factors that influence organizations' perceived success. This is important for managing interorganizational networks, which can mobilize communities to address complex health issues such as physical activity, and for achieving change. In 2011, we used structured interview and network survey data from 22 states in the United States to estimate multilevel random-intercept models to understand organization- and network-level factors that explain perceived network success. A total of 53 of 59 "whole networks" met the criteria for inclusion in the analysis (89.8%). Coordinators identified 559 organizations, with 3 to 12 organizations from each network taking the online survey (response rate = 69.7%; range = 33%-100%). Occupying a leadership position (P < .01), the amount of time with the network (P < .05), and support from community leaders (P < .05) emerged as correlates of perceived success. Organizations' perceptions of success can influence decisions about continuing involvement and investment in networks designed to promote environment and policy change for active living. Understanding these factors can help leaders manage complex networks that involve diverse memberships, varied interests, and competing community-level priorities.

23 CFR 1340.13 - Annual reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... survey design, alternate observation site selected subsequent to the original survey design), and by... survey design that was approved by NHTSA, in writing, as conforming to the Uniform Criteria for State Observational Surveys of Seat Belt Use, 23 CFR Part 1340; (3) The survey design has remained unchanged since the...

23 CFR 1340.13 - Annual reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... survey design, alternate observation site selected subsequent to the original survey design), and by... survey design that was approved by NHTSA, in writing, as conforming to the Uniform Criteria for State Observational Surveys of Seat Belt Use, 23 CFR Part 1340; (3) The survey design has remained unchanged since the...

23 CFR 1340.13 - Annual reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... survey design, alternate observation site selected subsequent to the original survey design), and by... survey design that was approved by NHTSA, in writing, as conforming to the Uniform Criteria for State Observational Surveys of Seat Belt Use, 23 CFR Part 1340; (3) The survey design has remained unchanged since the...

Electronic Sleep Stage Classifiers: A Survey and VLSI Design Methodology.

PubMed

Kassiri, Hossein; Chemparathy, Aditi; Salam, M Tariqus; Boyce, Richard; Adamantidis, Antoine; Genov, Roman

2017-02-01

First, existing sleep stage classifier sensors and algorithms are reviewed and compared in terms of classification accuracy, level of automation, implementation complexity, invasiveness, and targeted application. Next, the implementation of a miniature microsystem for low-latency automatic sleep stage classification in rodents is presented. The classification algorithm uses one EMG (electromyogram) and two EEG (electroencephalogram) signals as inputs in order to detect REM (rapid eye movement) sleep, and is optimized for low complexity and low power consumption. It is implemented in an on-board low-power FPGA connected to a multi-channel neural recording IC, to achieve low-latency (order of 1 ms or less) classification. Off-line experimental results using pre-recorded signals from nine mice show REM detection sensitivity and specificity of 81.69% and 93.86%, respectively, with the maximum latency of 39 [Formula: see text]. The device is designed to be used in a non-disruptive closed-loop REM sleep suppression microsystem, for future studies of the effects of REM sleep deprivation on memory consolidation.

Participatory Ethnographic Evaluation and Research: Reflections on the Research Approach Used to Understand the Complexity of Maternal Health Issues in South Sudan

PubMed Central

Elmusharaf, Khalifa; Byrne, Elaine; Manandhar, Mary; Hemmings, Joanne; O’Donovan, Diarmuid

2016-01-01

Many methodological approaches have been used to understand cultural dimensions to maternal health issues. Although a well-designed quantitative survey with a representative sample can provide essential information on trends in behavior, it does not necessarily establish a contextualized understanding of the complexity in which different behaviors occur. This article addresses how contextualized data can be collected in a short time and under conditions in which participants in conflict-affected zones might not have established, or time to establish, trust with the researchers. The solution, the Participatory Ethnographic Evaluation and Research (PEER) approach, is illustrated through a study whereby South Sudanese marginalized women were trained to design research instruments, and collect and analyze qualitative data. PEER overcomes the problem that many ethnographic or participatory approaches face—the extensive time and resources required to develop trusting relationships with the community to understand the local context and the social networks they form. PMID:27811290

Participatory Ethnographic Evaluation and Research: Reflections on the Research Approach Used to Understand the Complexity of Maternal Health Issues in South Sudan.

PubMed

Elmusharaf, Khalifa; Byrne, Elaine; Manandhar, Mary; Hemmings, Joanne; O'Donovan, Diarmuid

2017-07-01

Many methodological approaches have been used to understand cultural dimensions to maternal health issues. Although a well-designed quantitative survey with a representative sample can provide essential information on trends in behavior, it does not necessarily establish a contextualized understanding of the complexity in which different behaviors occur. This article addresses how contextualized data can be collected in a short time and under conditions in which participants in conflict-affected zones might not have established, or time to establish, trust with the researchers. The solution, the Participatory Ethnographic Evaluation and Research (PEER) approach, is illustrated through a study whereby South Sudanese marginalized women were trained to design research instruments, and collect and analyze qualitative data. PEER overcomes the problem that many ethnographic or participatory approaches face-the extensive time and resources required to develop trusting relationships with the community to understand the local context and the social networks they form.

From Laser Scanning to Finite Element Analysis of Complex Buildings by Using a Semi-Automatic Procedure.

PubMed

Castellazzi, Giovanni; D'Altri, Antonio Maria; Bitelli, Gabriele; Selvaggi, Ilenia; Lambertini, Alessandro

2015-07-28

In this paper, a new semi-automatic procedure to transform three-dimensional point clouds of complex objects to three-dimensional finite element models is presented and validated. The procedure conceives of the point cloud as a stacking of point sections. The complexity of the clouds is arbitrary, since the procedure is designed for terrestrial laser scanner surveys applied to buildings with irregular geometry, such as historical buildings. The procedure aims at solving the problems connected to the generation of finite element models of these complex structures by constructing a fine discretized geometry with a reduced amount of time and ready to be used with structural analysis. If the starting clouds represent the inner and outer surfaces of the structure, the resulting finite element model will accurately capture the whole three-dimensional structure, producing a complex solid made by voxel elements. A comparison analysis with a CAD-based model is carried out on a historical building damaged by a seismic event. The results indicate that the proposed procedure is effective and obtains comparable models in a shorter time, with an increased level of automation.

Curriculum in Psychiatry and Neurology for Pharmacy Programs

PubMed Central

Bostwick, Jolene R.; Goldstone, Lisa W; Thomas, Kelan; Nemire, Ruth; Gable, Kelly N.; Cates, Marshall; Caballero, Joshua; Smith, Tawny; Bainbridge, Jacquelyn

2017-01-01

Objective. To describe pharmacy curricula in psychiatry and neurology and to report on neuropsychiatric pharmacy specialists’ views on optimal curriculum. Methods. Design and administer one electronic survey to accredited pharmacy programs asking them to report information on curricula in psychiatry and neurology for the 2014-2015 academic year. Design and administer a separate electronic survey to board certified pharmacists with an academic affiliation who are members of the College of Psychiatric and Neurologic Pharmacists (CPNP) asking about their teaching activities and their opinion on optimal curricula. Results. Fifty-six percent of pharmacy programs and 65% of CPNP members responded to the surveys. The program survey revealed greater than 80% of topics were taught by full-time faculty. Didactic lecturing, team-based learning, and case studies were the most common teaching methods. Programs dedicated the most didactics (3 to 5+ hours) to epilepsy, depression, schizophrenia, substance use disorders, and pain. Autism, traumatic brain injury, personality, and eating disorders were either not taught or given ≤ 1 hour of didactics in most programs. Inpatient psychiatry had the most APPE placements with a mean of 19.6, range 0-83. APPE electives in psychiatry outnumbered those in neurology 5 to 1. CPNP member survey results showed 2 out of 3 members agreed that curriculum could be improved with additional APPEs in psychiatry and neurology. Conclusion. Didactic hour distribution in psychiatry and neurology could be improved to better align with board certification in psychiatric pharmacy (BCPP) recommendations and disorder prevalence and complexity. Specialists recommend an experiential component in neurology and psychiatry to combat stigma and improve pharmacist knowledge and skills. PMID:29109559

50 CFR 600.1417 - Requirements for exempted state designation based on submission of recreational survey data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the state's participation in a qualifying regional survey, and the survey's sample design, data... designation based on submission of recreational survey data. 600.1417 Section 600.1417 Wildlife and Fisheries... Requirements for exempted state designation based on submission of recreational survey data. (a) To be...

50 CFR 600.1417 - Requirements for exempted state designation based on submission of recreational survey data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the state's participation in a qualifying regional survey, and the survey's sample design, data... designation based on submission of recreational survey data. 600.1417 Section 600.1417 Wildlife and Fisheries... Requirements for exempted state designation based on submission of recreational survey data. (a) To be...

Public computing options for individuals with cognitive impairments: survey outcomes.

PubMed

Fox, Lynn Elizabeth; Sohlberg, McKay Moore; Fickas, Stephen; Lemoncello, Rik; Prideaux, Jason

2009-09-01

To examine availability and accessibility of public computing for individuals with cognitive impairment (CI) who reside in the USA. A telephone survey was administered as a semi-structured interview to 145 informants representing seven types of public facilities across three geographically distinct regions using a snowball sampling technique. An Internet search of wireless (Wi-Fi) hotspots supplemented the survey. Survey results showed the availability of public computer terminals and Internet hotspots was greatest in the urban sample, followed by the mid-sized and rural cities. Across seven facility types surveyed, libraries had the highest percentage of access barriers, including complex queue procedures, login and password requirements, and limited technical support. University assistive technology centres and facilities with a restricted user policy, such as brain injury centres, had the lowest incidence of access barriers. Findings suggest optimal outcomes for people with CI will result from a careful match of technology and the user that takes into account potential barriers and opportunities to computing in an individual's preferred public environments. Trends in public computing, including the emergence of widespread Wi-Fi and limited access to terminals that permit auto-launch applications, should guide development of technology designed for use in public computing environments.

An open-population hierarchical distance sampling model

USGS Publications Warehouse

Sollmann, Rachel; Beth Gardner,; Richard B Chandler,; Royle, J. Andrew; T Scott Sillett,

2015-01-01

Modeling population dynamics while accounting for imperfect detection is essential to monitoring programs. Distance sampling allows estimating population size while accounting for imperfect detection, but existing methods do not allow for direct estimation of demographic parameters. We develop a model that uses temporal correlation in abundance arising from underlying population dynamics to estimate demographic parameters from repeated distance sampling surveys. Using a simulation study motivated by designing a monitoring program for island scrub-jays (Aphelocoma insularis), we investigated the power of this model to detect population trends. We generated temporally autocorrelated abundance and distance sampling data over six surveys, using population rates of change of 0.95 and 0.90. We fit the data generating Markovian model and a mis-specified model with a log-linear time effect on abundance, and derived post hoc trend estimates from a model estimating abundance for each survey separately. We performed these analyses for varying number of survey points. Power to detect population changes was consistently greater under the Markov model than under the alternatives, particularly for reduced numbers of survey points. The model can readily be extended to more complex demographic processes than considered in our simulations. This novel framework can be widely adopted for wildlife population monitoring.

An open-population hierarchical distance sampling model.

PubMed

Sollmann, Rahel; Gardner, Beth; Chandler, Richard B; Royle, J Andrew; Sillett, T Scott

2015-02-01

Modeling population dynamics while accounting for imperfect detection is essential to monitoring programs. Distance sampling allows estimating population size while accounting for imperfect detection, but existing methods do not allow for estimation of demographic parameters. We develop a model that uses temporal correlation in abundance arising from underlying population dynamics to estimate demographic parameters from repeated distance sampling surveys. Using a simulation study motivated by designing a monitoring program for Island Scrub-Jays (Aphelocoma insularis), we investigated the power of this model to detect population trends. We generated temporally autocorrelated abundance and distance sampling data over six surveys, using population rates of change of 0.95 and 0.90. We fit the data generating Markovian model and a mis-specified model with a log-linear time effect on abundance, and derived post hoc trend estimates from a model estimating abundance for each survey separately. We performed these analyses for varying numbers of survey points. Power to detect population changes was consistently greater under the Markov model than under the alternatives, particularly for reduced numbers of survey points. The model can readily be extended to more complex demographic processes than considered in our simulations. This novel framework can be widely adopted for wildlife population monitoring.

Aerial Survey of Ames Research Center - Flight Simulation Complex' Flight simulators create an

NASA Technical Reports Server (NTRS)

1967-01-01

Aerial Survey of Ames Research Center - Flight Simulation Complex' Flight simulators create an authentic aircraft environment by generating the appropriate physical cues that provide the sensations of flight.

People’s Preferences of Urban Design Qualities for Walking on a Commercial Street

NASA Astrophysics Data System (ADS)

Ernawati, J.; Surjono; Sudarmo, B. S.

2018-03-01

This research aims to explore people’s preferences of urban design qualities for walking on a commercial street, with Kawi Street located in a commercial neighborhood in the town of Malang Indonesia as the case study. Based on a literature review, this study used eight urban design qualities, i.e., enclosure, legibility, human scale, transparency, complexity, coherence, linkage, and imageability. This study applied a survey research method using a self-administered paper-pencil questionnaire applying two measurement techniques: Likert scale was used to explore people’s evaluations of urban design qualities of the street, while multiple-rating scales were used to measure people’s preference for walking on the street. One hundred and ten people randomly selected as respondents. Regression analysis was employed to explore the influence of urban design qualities on people preference for walking. Results indicated four urban design qualities that affect people’s choice for walking on a commercial street, i.e., transparency, coherence, linkage, and imageability. Implications of the findings will be discussed in the paper.

Multi-Objective Hybrid Optimal Control for Multiple-Flyby Interplanetary Mission Design Using Chemical Propulsion

NASA Technical Reports Server (NTRS)

Englander, Jacob A.; Vavrina, Matthew A.

2015-01-01

Preliminary design of high-thrust interplanetary missions is a highly complex process. The mission designer must choose discrete parameters such as the number of flybys and the bodies at which those flybys are performed. For some missions, such as surveys of small bodies, the mission designer also contributes to target selection. In addition, real-valued decision variables, such as launch epoch, flight times, maneuver and flyby epochs, and flyby altitudes must be chosen. There are often many thousands of possible trajectories to be evaluated. The customer who commissions a trajectory design is not usually interested in a point solution, but rather the exploration of the trade space of trajectories between several different objective functions. This can be a very expensive process in terms of the number of human analyst hours required. An automated approach is therefore very desirable. This work presents such an approach by posing the impulsive mission design problem as a multiobjective hybrid optimal control problem. The method is demonstrated on several real-world problems.

Workplace assaults on nursing assistants in US nursing homes: a multilevel analysis.

PubMed

Tak, SangWoo; Sweeney, Marie Haring; Alterman, Toni; Baron, Sherry; Calvert, Geoffrey M

2010-10-01

We examined risk factors for injuries to nursing assistants from assaults by nursing home residents at both the individual and the organizational level. We analyzed data from the 2004 National Nursing Assistant Survey that were linked to facility information from the 2004 National Nursing Home Survey by use of multilevel modeling that accounted for the complex survey design effect. Thirty-four percent of nursing assistants surveyed reported experiencing physical injuries from residents' aggression in the previous year. Mandatory overtime (odds ratio [OR] = 1.65; 95% confidence interval [CI] = 1.22, 2.24) and not having enough time to assist residents with their activities of daily living (OR = 1.49; 95% CI = 1.25, 1.78) were strongly associated with experiencing injuries from assaults. Nursing assistants employed in nursing homes with Alzheimer care units were more likely to experience such injuries, including being bitten by residents. Reducing mandatory overtime and having a less demanding workload may reduce the risk of workplace violence. In particular, prevention activities should be targeted at those nursing homes that care for cognitively impaired patients.

Workplace Assaults on Nursing Assistants in US Nursing Homes: A Multilevel Analysis

PubMed Central

Sweeney, Marie Haring; Alterman, Toni; Baron, Sherry; Calvert, Geoffrey M.

2010-01-01

Objectives. We examined risk factors for injuries to nursing assistants from assaults by nursing home residents at both the individual and the organizational level. Methods. We analyzed data from the 2004 National Nursing Assistant Survey that were linked to facility information from the 2004 National Nursing Home Survey by use of multilevel modeling that accounted for the complex survey design effect. Results. Thirty-four percent of nursing assistants surveyed reported experiencing physical injuries from residents' aggression in the previous year. Mandatory overtime (odds ratio [OR] = 1.65; 95% confidence interval [CI] = 1.22, 2.24) and not having enough time to assist residents with their activities of daily living (OR = 1.49; 95% CI = 1.25, 1.78) were strongly associated with experiencing injuries from assaults. Nursing assistants employed in nursing homes with Alzheimer care units were more likely to experience such injuries, including being bitten by residents. Conclusions. Reducing mandatory overtime and having a less demanding workload may reduce the risk of workplace violence. In particular, prevention activities should be targeted at those nursing homes that care for cognitively impaired patients. PMID:20724680

The Boeing 747 fatigue integrity program

NASA Technical Reports Server (NTRS)

Spencer, M. M.

1972-01-01

The fatigue integrity program which was established to insure economic operations and to provide foundation data for inspection and maintenance is discussed. Significant features of the 747 fatigue integrity program are: (1) fatigue analyses which are continually updated to reflect design changes, fatigue test results, and static and flight load survey measurements; (2) material selection and detail design by using initial fatigue analyses, service experience, and testing; and (3) fatigue testing to check detail design quality and to verify the analyses, culminated by the test of a structurally complete airframe. Fatigue stress analyses were performed with the aid of experimental as well as analytical procedures. Extensive application was made of the stress severity factor, developed at Boeing, for evaluating peak stresses in complex joints. A frame of reference was established by families of structural fatigue performance curves (S-N curves) encompassing the range of materials and fatigue qualities anticipated for the 747 airplane design.

D Survey in Complex Archaeological Environments: AN Approach by Terrestrial Laser Scanning

NASA Astrophysics Data System (ADS)

Ebolese, D.; Dardanelli, G.; Lo Brutto, M.; Sciortino, R.

2018-05-01

The survey of archaeological sites by appropriate geomatics technologies is an important research topic. In particular, the 3D survey by terrestrial laser scanning has become a common practice for 3D archaeological data collection. Even if terrestrial laser scanning survey is quite well established, due to the complexity of the most archaeological contexts, many issues can arise and make the survey more difficult. The aim of this work is to describe the methodology chosen for a terrestrial laser scanning survey in a complex archaeological environment according to the issues related to the particular structure of the site. The developed approach was used for the terrestrial laser scanning survey and documentation of a part of the archaeological site of Elaiussa Sebaste in Turkey. The proposed technical solutions have allowed providing an accurate and detailed 3D dataset of the study area. In addition, further products useful for archaeological analysis were also obtained from the 3D dataset of the study area.

Diffraction modeling of finite subband EFC probing on dark hole contrast with WFIRST-CGI shaped pupil coronagraph

NASA Astrophysics Data System (ADS)

Zhou, Hanying; Krist, John; Nemati, Bijan

2016-08-01

Current coronagraph instrument design (CGI), as a part of a proposed NASA WFIRST (Wide-Field InfraRed Survey Telescope) mission, allocates two subband filters per full science band in order to contain system complexity and cost. We present our detailed investigation results on the adequacy of such limited number of finite subband filters in achieving full band dark hole contrast with shaped pupil coronagraph. The study is based on diffraction propagation modeling with realistic WFIRST optics, where each subband's complex field estimation is obtained, using Electric Field Conjugation (EFC) wavefront sensing / control algorithm, from pairwise pupil plane deformable mirror (DM) probing and image plane intensity averaging of the resulting fields of multiple (subband) wavelengths. Multiple subband choices and probing and control strategies are explored, including standard subband probing; mixed wavelength and/or weighted Jacobian matrix; subband probing with intensity subtraction; and extended subband probing with intensity subtraction. Overall, the investigation shows that the achievable contrast with limited number of finite subband EFC probing is about 2 2.5x worse than the designed post-EFC contrast for current SPC design. The result suggests that for future shaped pupil design, slightly larger over intended full bandwidth should be considered if it will be used with limited subbands for probing.

50 CFR 600.1417 - Requirements for exempted state designation based on submission of recreational survey data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the state's participation in a qualifying regional survey, and the survey's sample design, data...) Meet NMFS survey design and data collection standards. [73 FR 79717, Dec. 30, 2008, as amended at 77 FR... designation based on submission of recreational survey data. 600.1417 Section 600.1417 Wildlife and Fisheries...

50 CFR 600.1417 - Requirements for exempted state designation based on submission of recreational survey data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the state's participation in a qualifying regional survey, and the survey's sample design, data...) Meet NMFS survey design and data collection standards. [73 FR 79717, Dec. 30, 2008, as amended at 77 FR... designation based on submission of recreational survey data. 600.1417 Section 600.1417 Wildlife and Fisheries...

50 CFR 600.1417 - Requirements for exempted state designation based on submission of recreational survey data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the state's participation in a qualifying regional survey, and the survey's sample design, data...) Meet NMFS survey design and data collection standards. [73 FR 79717, Dec. 30, 2008, as amended at 77 FR... designation based on submission of recreational survey data. 600.1417 Section 600.1417 Wildlife and Fisheries...

Analysis of Complexity Evolution Management and Human Performance Issues in Commercial Aircraft Automation Systems

NASA Technical Reports Server (NTRS)

Vakil, Sanjay S.; Hansman, R. John

2000-01-01

Autoflight systems in the current generation of aircraft have been implicated in several recent incidents and accidents. A contributory aspect to these incidents may be the manner in which aircraft transition between differing behaviours or 'modes.' The current state of aircraft automation was investigated and the incremental development of the autoflight system was tracked through a set of aircraft to gain insight into how these systems developed. This process appears to have resulted in a system without a consistent global representation. In order to evaluate and examine autoflight systems, a 'Hybrid Automation Representation' (HAR) was developed. This representation was used to examine several specific problems known to exist in aircraft systems. Cyclomatic complexity is an analysis tool from computer science which counts the number of linearly independent paths through a program graph. This approach was extended to examine autoflight mode transitions modelled with the HAR. A survey was conducted of pilots to identify those autoflight mode transitions which airline pilots find difficult. The transitions identified in this survey were analyzed using cyclomatic complexity to gain insight into the apparent complexity of the autoflight system from the perspective of the pilot. Mode transitions which had been identified as complex by pilots were found to have a high cyclomatic complexity. Further examination was made into a set of specific problems identified in aircraft: the lack of a consistent representation of automation, concern regarding appropriate feedback from the automation, and the implications of physical limitations on the autoflight systems. Mode transitions involved in changing to and leveling at a new altitude were identified across multiple aircraft by numerous pilots. Where possible, evaluation and verification of the behaviour of these autoflight mode transitions was investigated via aircraft-specific high fidelity simulators. Three solution approaches to concerns regarding autoflight systems, and mode transitions in particular, are presented in this thesis. The first is to use training to modify pilot behaviours, or procedures to work around known problems. The second approach is to mitigate problems by enhancing feedback. The third approach is to modify the process by which automation is designed. The Operator Directed Process forces the consideration and creation of an automation model early in the design process for use as the basis of the software specification and training.

A Survey on Security and Privacy in Emerging Sensor Networks: From Viewpoint of Close-Loop.

PubMed

Zhang, Lifu; Zhang, Heng

2016-03-26

Nowadays, as the next generation sensor networks, Cyber-Physical Systems (CPSs) refer to the complex networked systems that have both physical subsystems and cyber components, and the information flow between different subsystems and components is across a communication network, which forms a closed-loop. New generation sensor networks are found in a growing number of applications and have received increasing attention from many inter-disciplines. Opportunities and challenges in the design, analysis, verification and validation of sensor networks co-exists, among which security and privacy are two important ingredients. This paper presents a survey on some recent results in the security and privacy aspects of emerging sensor networks from the viewpoint of the closed-loop. This paper also discusses several future research directions under these two umbrellas.

Attitudes of Swedes to marginal donors and xenotransplantation

PubMed Central

Lundin, S; Idvall, M

2003-01-01

The aim of our survey was to capture the attitudes of Swedes to marginal donors and xenotransplantation. Modern biotechnology makes it possible to replace non-functioning organs, cells, and genes. Nonetheless, people may have reservations and fears about such treatments. With the survey, Attitudes of the General Public to Transplants, we have sought to expose the ambivalence that arises when medical possibilities are juxtaposed with ideas of risk. The design of the questionnaire originates from the interdisciplinary cooperation between ethnologists, medical scientists, and geneticists. By combining qualitative and quantitative methods, it is possible to illustrate the complexity that characterises people's view of modern biomedicine. People's reflections are based on a personal and situation bound morality, which does not necessarily coincide with what they generally consider as ethically justifiable. PMID:12796443

76 FR 79054 - Direct Investment Surveys: BE-12, Benchmark Survey of Foreign Direct Investment in the United States

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-21

... items collected, as well as changing the names and design of the survey forms. The changes are intended... reporting thresholds and data items collected, as well as changes in the names and design of the survey... survey forms. The new design incorporates improvements made to other BEA surveys. Survey instructions and...

Autonomy Software: V&V Challenges and Characteristics

NASA Technical Reports Server (NTRS)

Schumann, Johann; Visser, Willem

2006-01-01

The successful operation of unmanned air vehicles requires software with a high degree of autonomy. Only if high level functions can be carried out without human control and intervention, complex missions in a changing and potentially unknown environment can be carried out successfully. Autonomy software is highly mission and safety critical: failures, caused by flaws in the software cannot only jeopardize the mission, but could also endanger human life (e.g., a crash of an UAV in a densely populated area). Due to its large size, high complexity, and use of specialized algorithms (planner, constraint-solver, etc.), autonomy software poses specific challenges for its verification, validation, and certification. -- - we have carried out a survey among researchers aid scientists at NASA to study these issues. In this paper, we will present major results of this study, discussing the broad spectrum. of notions and characteristics of autonomy software and its challenges for design and development. A main focus of this survey was to evaluate verification and validation (V&V) issues and challenges, compared to the development of "traditional" safety-critical software. We will discuss important issues in V&V of autonomous software and advanced V&V tools which can help to mitigate software risks. Results of this survey will help to identify and understand safety concerns in autonomy software and will lead to improved strategies for mitigation of these risks.

Addressing current challenges in cancer immunotherapy with mathematical and computational modelling.

PubMed

Konstorum, Anna; Vella, Anthony T; Adler, Adam J; Laubenbacher, Reinhard C

2017-06-01

The goal of cancer immunotherapy is to boost a patient's immune response to a tumour. Yet, the design of an effective immunotherapy is complicated by various factors, including a potentially immunosuppressive tumour microenvironment, immune-modulating effects of conventional treatments and therapy-related toxicities. These complexities can be incorporated into mathematical and computational models of cancer immunotherapy that can then be used to aid in rational therapy design. In this review, we survey modelling approaches under the umbrella of the major challenges facing immunotherapy development, which encompass tumour classification, optimal treatment scheduling and combination therapy design. Although overlapping, each challenge has presented unique opportunities for modellers to make contributions using analytical and numerical analysis of model outcomes, as well as optimization algorithms. We discuss several examples of models that have grown in complexity as more biological information has become available, showcasing how model development is a dynamic process interlinked with the rapid advances in tumour-immune biology. We conclude the review with recommendations for modellers both with respect to methodology and biological direction that might help keep modellers at the forefront of cancer immunotherapy development. © 2017 The Author(s).

23 CFR 1340.10 - Submission and approval of seat belt survey design.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Submission and approval of seat belt survey design. 1340... § 1340.10 Submission and approval of seat belt survey design. (a) Contents: The following information shall be included in the State's seat belt survey design submitted for NHTSA approval: (1) Sample design...

23 CFR 1340.10 - Submission and approval of seat belt survey design.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Submission and approval of seat belt survey design. 1340... § 1340.10 Submission and approval of seat belt survey design. (a) Contents: The following information shall be included in the State's seat belt survey design submitted for NHTSA approval: (1) Sample design...

23 CFR 1340.10 - Submission and approval of seat belt survey design.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Submission and approval of seat belt survey design. 1340... § 1340.10 Submission and approval of seat belt survey design. (a) Contents: The following information shall be included in the State's seat belt survey design submitted for NHTSA approval: (1) Sample design...

Space Station long term lubrication analysis. Phase 1 preliminary tribological survey

NASA Technical Reports Server (NTRS)

Dufrane, K. F.; Kannel, J. W.; Lowry, J. A.; Montgomery, E. E.

1990-01-01

Increases in the size, complexity, and life requirements of satellites and space vehicles have put increasing demands on the lubrication requirements for trouble-free service. Since the development costs of large systems are high, long lives with minimum maintenance are dictated. The Space Station represents the latest level of size and complexity in satellite development; it will be nearly 100 meters in major dimensions and will have a life requirement of thirty years. It will have numerous mechanisms critical to its success, some of which will be exposed to the space environment. Designing long-life lubrication systems and choosing appropriate lubricants for these systems will be necessary for their meeting the requirements and for avoiding failures with associated dependent mechanisms. The purpose of this program was to identify the various critical mechanisms and review their designs during the overall design and development stage so that problem areas could be avoided or minimized prior to the fabrication of hardware. The specific objectives were fourfold: (1) to perform a tribology survey of the Space Station for the purpose of documenting each wear point as to materials involved, environmental conditions, and operating characteristics; (2) to review each wear point (point of relative motion) as to the lubrication used and substrate materials selected in the context of its operating characteristics and the environmental conditions imposed; (3) to make recommendations for improvement in areas where the lubricant chosen and/or where the substrate (materials of the wear couple) are not considered optimum for the application; and (4) to make or recommend simulated or full scale tests in tribological areas where the state-of-the-art is being advanced, in areas where new designs are obviously being employed and a critical review would indicate that problems are a strong possibility, and/or where excessive wear, a malfunction, or excessive leakage would create fluid systems problems or contamination of exposed optical equipment.

The Outer Solar System Origins Survey (OSSOS): a status update

NASA Astrophysics Data System (ADS)

Kavelaars, J. J.; Bannister, Michele T.; Gladman, Brett; Petit, Jean-Marc; Gwyn, S.; Chen, Ying-Tung Charles; Alexandersen, Mike; Volk, Kat

2015-11-01

OSSOS is a 560 hour imaging survey using MegaPrime on the CFHT designed to produce a well characterized sample of Kuiper belt objects whose orbital and physical properties will provide useful constraints on the evolutionary history of the outer solar system. Started in 2013, this 4 year project has now entered the finally year of survey operation. With 1/2 (84 square degrees) of the observation fully analyzed, OSOSS has detected and tracked 219 TNOs brighter than our typical flux limit of r' ~ 24.5. This is 30% more detections than the entire Canada-France Ecliptic Plane Survey (CFEPS), a precursor project.Based on the first quarter of the survey the OSSOS project confirms the CFEPS-L7 orbital model of the orbital structure of the TNO population (Petit et al., 2011) and has provided additional evidence of complex structure in the size distribution of scatterin TNOs (Shankman et al., 2015). A number of the OSSOS science teams are presenting results at this meeting: Bannister et al., Benecchi et al., Fraser et al., Volk et al. on a variety of aspects of the orbital and physical properties the OSSOS detected samples. Here we present a summary of the current status of the survey: field locations, basic characterization, detection rates and some global detection statistics.More details on the OSSOS project are available from our web site: www.ossos-survey.org

Vulnerability, risk perception, and health profile of marginalized people exposed to multiple built-environment stressors in Worcester, Massachusetts: a pilot project.

PubMed

Downs, Timothy J; Ross, Laurie; Goble, Robert; Subedi, Rajendra; Greenberg, Sara; Taylor, Octavia

2011-04-01

Millions of low-income people of diverse ethnicities inhabit stressful old urban industrial neighborhoods. Yet we know little about the health impacts of built-environment stressors and risk perceptions in such settings; we lack even basic health profiles. Difficult access is one reason (it took us 30 months to survey 80 households); the lack of multifaceted survey tools is another. We designed and implemented a pilot vulnerability assessment tool in Worcester, Massachusetts. We answer: (1) How can we assess vulnerability to multiple stressors? (2) What is the nature of complex vulnerability-including risk perceptions and health profiles? (3) How can findings be used by our wider community, and what lessons did we learn? (4) What implications arise for science and policy? We sought a holistic picture of neighborhood life. A reasonably representative sample of 80 respondents captured data for 254 people about: demographics, community concerns and resources, time-activity patterns, health information, risk/stress perceptions, and resources/capacities for coping. Our key findings derive partly from the survey data and partly from our experience in obtaining those data. Data strongly suggest complex vulnerability dominated by psychosocial stress. Unexpected significant gender and ethnic disease disparities emerged: notably, females have twice the disease burden of males, and white females twice the burden of females of color (p < 0.01). Self-reported depression differentiated by gender and age is illustrative. Community based participatory research (CBPR) approaches require active engagement with marginalized populations, including representatives as funded partners. Complex vulnerability necessitates holistic, participatory approaches to improve scientific understanding and societal responses. © 2010 Society for Risk Analysis.

Setting the stage for equity-sensitive monitoring of the maternal and child health Millennium Development Goals.

PubMed Central

Wirth, Meg E.; Balk, Deborah; Delamonica, Enrique; Storeygard, Adam; Sacks, Emma; Minujin, Alberto

2006-01-01

OBJECTIVE: This analysis seeks to set the stage for equity-sensitive monitoring of the health-related Millennium Development Goals (MDGs). METHODS: We use data from international household-level surveys (Demographic and Health Surveys (DHS) and Multiple Indicator Cluster Surveys (MICS)) to demonstrate that establishing an equity baseline is necessary and feasible, even in low-income and data-poor countries. We assess data from six countries using 11 health indicators and six social stratifiers. Simple bivariate stratification is complemented by simultaneous stratification to expose the compound effect of multiple forms of vulnerability. FINDINGS: The data reveal that inequities are complex and interactive: inferences cannot be drawn about the nature or extent of inequities in health outcomes from a single stratifier or indicator. CONCLUSION: The MDGs and other development initiatives must become more comprehensive and explicit in their analysis and tracking of inequities. The design of policies to narrow health gaps must take into account country-specific inequities. PMID:16878225

Three-dimensional ocean sensor networks: A survey

NASA Astrophysics Data System (ADS)

Wang, Yu; Liu, Yingjian; Guo, Zhongwen

2012-12-01

The past decade has seen a growing interest in ocean sensor networks because of their wide applications in marine research, oceanography, ocean monitoring, offshore exploration, and defense or homeland security. Ocean sensor networks are generally formed with various ocean sensors, autonomous underwater vehicles, surface stations, and research vessels. To make ocean sensor network applications viable, efficient communication among all devices and components is crucial. Due to the unique characteristics of underwater acoustic channels and the complex deployment environment in three dimensional (3D) ocean spaces, new efficient and reliable communication and networking protocols are needed in design of ocean sensor networks. In this paper, we aim to provide an overview of the most recent advances in network design principles for 3D ocean sensor networks, with focuses on deployment, localization, topology design, and position-based routing in 3D ocean spaces.

Design of Off-Axis PIAACMC Mirrors

NASA Technical Reports Server (NTRS)

Pluzhnik, Eugene; Guyon, Olivier; Belikov, Ruslan; Kern, Brian; Bendek, Eduardo

2015-01-01

The Phase-Induced Amplitude Apodization Complex Mask Coronagraph (PIAACMC) provides an efficient way to control diffraction propagation effects caused by the central obstruction/segmented mirrors of the telescope. PIAACMC can be optimized in a way that takes into account both chromatic diffraction effects caused by the telescope obstructed aperture and tip/tilt sensitivity of the coronagraph. As a result, unlike classic PIAA, the PIAACMC mirror shapes are often slightly asymmetric even for an on-axis configuration and require more care in calculating off-axis shapes when an off-axis configuration is preferred. A method to design off-axis PIAA mirror shapes given an on-axis mirror design is presented. The algorithm is based on geometrical ray tracing and is able to calculate off-axis PIAA mirror shapes for an arbitrary geometry of the input and output beams. The method is demonstrated using the third generation PIAACMC design for WFIRST-AFTA (Wide Field Infrared Survey Telescope-Astrophysics Focused Telescope Assets) telescope. Geometrical optics design issues related to the off-axis diffraction propagation effects are also discussed.

Formation Flying Design and Applications in Weak Stability Boundary Regions

NASA Technical Reports Server (NTRS)

Folta, David

2003-01-01

Weak Stability regions serve as superior locations for interferometric scientific investigations. These regions are often selected to minimize environmental disturbances and maximize observing efficiency. Design of formations in these regions are becoming ever more challenging as more complex missions are envisioned. The development of algorithms to enable the capability for formation design must be further enabled to incorporate better understanding of WSB solution space. This development will improve the efficiency and expand the capabilities of current approaches. The Goddard Space Flight Center (GSFC) is currently supporting multiple formation missions in WSB regions. This end-to-end support consists of mission operations, trajectory design, and control. It also includes both algorithm and software development. The Constellation-X, Maxim, and Stellar Imager missions are examples of the use of improved numerical methods for attaining constrained formation geometries and controlling their dynamical evolution. This paper presents a survey of formation missions in the WSB regions and a brief description of the formation design using numerical and dynamical techniques.

Formation flying design and applications in weak stability boundary regions.

PubMed

Folta, David

2004-05-01

Weak stability regions serve as superior locations for interferomertric scientific investigations. These regions are often selected to minimize environmental disturbances and maximize observation efficiency. Designs of formations in these regions are becoming ever more challenging as more complex missions are envisioned. The development of algorithms to enable the capability for formation design must be further enabled to incorporate better understanding of weak stability boundary solution space. This development will improve the efficiency and expand the capabilities of current approaches. The Goddard Space Flight Center (GSFC) is currently supporting multiple formation missions in weak stability boundary regions. This end-to-end support consists of mission operations, trajectory design, and control. It also includes both algorithm and software development. The Constellation-X, Maxim, and Stellar Imager missions are examples of the use of improved numeric methods to attain constrained formation geometries and control their dynamical evolution. This paper presents a survey of formation missions in the weak stability boundary regions and a brief description of formation design using numerical and dynamical techniques.

78 FR 5458 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding..., well-designed Hospice Survey will allow us to understand: (1) Patient experiences throughout their... accordance with CAHPS[supreg] Survey Design Principles and implementation instructions will be based on those...

Survey of alternative gas turbine engine and cycle design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lukas, H.

1986-02-01

In the period of the 1940's to 1960's much experimentation was performed in the areas of intercooling, reheat, and recuperation, as well as the use of low-grade fuels in gas turbines. The Electric Power Research Institute (EPRI), in an effort to document past experience which can be used as the basis for current design activities, commissioned a study to document alternate cycles and components used in gas turbine design. The study was performed by obtaining the important technical and operational criteria of the cycles through a literature search of published documents, articles, and papers. Where possible the information was augmentedmore » through dialogue with persons associated with those cycles and with the manufacturers. The survey indicated that many different variations of the simple open-cycle gas turbine plant were used. Many of these changes resulted in increases in efficiency over the low simple-cycle efficiency of that period. Metallurgy, as well as compressor and turbine design, limited the simple-cycle efficiency to the upper teens. The cycle modifications increased those efficiencies to the twenties and thirties. Advances in metallurgy as well as compressor and turbine design, coupled with the decrease in flue cost, stopped the development of these complex cycles. Many of the plants operated successfully for many years, and only because newer simple-cycle gas turbine plants and large steam plants had better heat rates were these units shutdown or put into stand-by service. 24 refs., 25 figs., 114 tabs.« less

A survey of life support system automation and control

NASA Technical Reports Server (NTRS)

Finn, Cory K.

1993-01-01

The level of automation and control necessary to support advanced life support systems for use in the manned space program is steadily increasing. As the length and complexity of manned missions increase, life support systems must be able to meet new space challenges. Longer, more complex missions create new demands for increased automation, improved sensors, and improved control systems. It is imperative that research in these key areas keep pace with current and future developments in regenerative life support technology. This paper provides an overview of past and present research in the areas of sensor development, automation, and control of life support systems for the manned space program, and it discusses the impact continued research in several key areas will have on the feasibility, operation, and design of future life support systems.

Mu2e Solenoid Field Mapping System Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feher, Sandor; DeLurgio, Patrick M.; Elementi, Luciano

The Mu2e experiment at Fermilab plans to search for charged-lepton flavor violation by looking for neutrino-less muon to electron conversion in the field of the nucleus. A complex solenoid system and precise knowledge of its magnetic field play a major role in the experimental approach Mu2e has chosen. It is essential to map the solenoid field up to 10 -4 accuracy. This article describes the design of the Field Mapping System Mu2e will use to measure the magnetic field. Two different mechanical mapper systems, a survey based position determination of the in-house calibrated 3D Hall probes, a motion control system,more » and a data acquisition and readout system are presented.« less

Mu2e Solenoid Field Mapping System Design

DOE PAGES

Feher, Sandor; DeLurgio, Patrick M.; Elementi, Luciano; ...

2018-01-11

The Mu2e experiment at Fermilab plans to search for charged-lepton flavor violation by looking for neutrino-less muon to electron conversion in the field of the nucleus. A complex solenoid system and precise knowledge of its magnetic field play a major role in the experimental approach Mu2e has chosen. It is essential to map the solenoid field up to 10 -4 accuracy. This article describes the design of the Field Mapping System Mu2e will use to measure the magnetic field. Two different mechanical mapper systems, a survey based position determination of the in-house calibrated 3D Hall probes, a motion control system,more » and a data acquisition and readout system are presented.« less

Using a mixed methods research design to investigate complementary alternative medicine (CAM) use among women with breast cancer in Ireland.

PubMed

Fox, Patricia; Butler, Michelle; Coughlan, Barbara; Murray, Mary; Boland, Noreen; Hanan, Terry; Murphy, Hilary; Forrester, Pauline; O' Brien, Marie; O' Sullivan, Nollaig

2013-08-01

To investigate complementary and alternative medicine (CAM) use among women with breast cancer in Ireland using a mixed methods modified sequential explanatory design. Semi-structured interviews were conducted with oncology professionals (n = 20) and CAM practitioners (n = 20) and this was followed by a survey of 406 women with breast cancer using the 'Use of Complementary and Alternative Therapies Survey' questionnaire (UCATS) (Lengacher et al., 2003). Follow up interviews were subsequently undertaken with a subset of this survey sample (n = 31). Over half of those surveyed (55.7%, n = 226) used some form of CAM since diagnosis. The most frequently used therapies were massage, herbal supplements (including herbs with oestrogenic properties), antioxidants, relaxation, counselling, health supplements, reflexology, reiki and support groups. Dietary interventions were used primarily to reduce symptoms and/or side effects while reduction of psychological stress was the primary reason for use of stress-reducing therapies. Most respondents reported that the CAM therapies they had used were helpful. The qualitative data elaborated on and provided clarification of the survey results. Similar to international studies, CAM is popular among women with breast cancer in Ireland. As such, the challenge for Irish oncology professionals is to identify low risk CAM therapies that are likely to benefit patients while educating patients and themselves on therapies which may be of concern. This study clearly illustrates the benefits of using a mixed methods approach to enhance our understanding of a complex clinical issue and thus we recommend that this method should be the method of choice when planning health services research. Copyright © 2012 Elsevier Ltd. All rights reserved.

A numerical simulation of the NFAC (National Full-scale Aerodynamics Complex) open-return wind tunnel inlet flow

NASA Technical Reports Server (NTRS)

Kaul, U. K.; Ross, J. C.; Jacocks, J. L.

1985-01-01

The flow into an open return wind tunnel inlet was simulated using Euler equations. An explicit predictor-corrector method was employed to solve the system. The calculation is time-accurate and was performed to achieve a steady-state solution. The predictions are in reasonable agreement with the experimental data. Wall pressures are accurately predicted except in a region of recirculating flow. Flow-field surveys agree qualitatively with laser velocimeter measurements. The method can be used in the design process for open return wind tunnels.

Managing IT service management implementation complexity: from the perspective of the Warfield Version of systems science

NASA Astrophysics Data System (ADS)

Wan, Jiangping; Jones, James D.

2013-11-01

The Warfield version of systems science supports a wide variety of application areas, and is useful to practitioners who use the work program of complexity (WPOC) tool. In this article, WPOC is applied to information technology service management (ITSM) for managing the complexity of projects. In discussing the application of WPOC to ITSM, we discuss several steps of WPOC. The discovery step of WPOC consists of a description process and a diagnosis process. During the description process, 52 risk factors are identified, which are then narrowed to 20 key risk factors. All of this is done by interviews and surveys. Root risk factors (the most basic risk factors) consist of 11 kinds of common 'mindbugs' which are selected from an interpretive structural model. This is achieved by empirical analysis of 25 kinds of mindbugs. (A lesser aim of this research is to affirm that these mindbugs developed from a Western mindset have corresponding relevance in a completely different culture: the Peoples Republic of China.) During the diagnosis process, the relationships among the root risk factors in the implementation of the ITSM project are identified. The resolution step of WPOC consists of a design process and an implementation process. During the design process, issues related to the ITSM application are compared to both e-Government operation and maintenance, and software process improvement. The ITSM knowledge support structure is also designed at this time. During the implementation process, 10 keys to the successful implementation of ITSM projects are identified.

Design of Reconnaissance Helicopter Electromagnetic and Magnetic Geophysical Surveys of the North Platte River and Lodgepole Creek, Nebraska

NASA Astrophysics Data System (ADS)

Smith, B. D.; Cannia, J. C.; Abraham, J. D.

2009-12-01

An innovative flight line layout using widely separated lines was used for frequency domain helicopter electromagnetic (HEM) surveys in 2008 and 2009 in the Panhandle of western Nebraska. The HEM survey design was developed as part of a joint hydrologic study by the North Platte Natural Resource District, South Platte Natural Resource District, UNL-Conservation and Survey Division, and U.S. Geological Survey to improve the understanding of relationships between surface water and groundwater systems critical to developing groundwater flow models used in water resources management programs. Use of HEM methods for hydrologic mapping had been demonstrated by HEM surveys conducted in 2007 of sites in the glaciated Platte River Basin in eastern Nebraska. These surveys covered township-scale areas with flight lines laid out in blocks where the lines were spaced about 270m apart. The HEM successfully mapped the complex 3D geometry of shallow sand and gravel aquifers through and within conductive till to a depth of about 40m in a total area of about 680 km2 (263 mi2). Current groundwater flow models in western Nebraska include the Cooperative Hydrologic Study (COHYST), run by a consortium of state agencies, which is tasked to develop scientifically supportable hydrologic databases, analyses, and models, and the North Platte River Valley Optimization Model (NPRVOM). The COHYST study area, about 75,000 km2 (29,000 mi2), includes the Platte River Basin from the Nebraska - Wyoming border to Lincoln. Considering the large area of the groundwater models, the USGS decided in collaboration with the NRD to use a more reconnaissance-style layout for the 2008 HEM survey which encompassed about 21,000 km2 (8,000 mi2). A reconnaissance-type HEM survey is made possible due to technical capabilities of applicable HEM systems and due to the level of hydrogeologic information available in the NRD. The particular capabilities of the HEM system are careful calibration, low drift, low noise, and leveling. The widely spaced lines do not provide as much opportunity for self-checking by line-to-line correlation as closely spaced lines. The final project design in 2008 consisted of flight lines paralleling the major drainages and lines perpendicular to the drainages spaced about 10 km (6 mi) apart. Layout of lines following the drainages is similar to the design of previous HEM surveys of levees. Although the general geologic features are known to be broad (sandstone channels and bedrock topography) from wells spaced about 2.5 km (1.5 mi), two “standard blocks” were flown with 270 m line spacing in critical areas to both better resolve of electrical signatures and to provide greater detail than the reconnaissance survey. The processed data from the two detailed survey blocks confirmed hypothesized electrical signatures of major hydrostratigraphic units in the area. Interpretation of data from the widely spaced lines, lines along the rivers, and the detail blocks fit well with the known hydrogeology.

CCP Astronauts at LC 39A and SpaceX Recovery Ship

NASA Image and Video Library

2018-03-28

Commercial Crew Astronauts Bob Behnken , Eric Boe, Doug Hurley, and Suni Williams survey SpaceX's progress at Launch Complex 39 A. The survey helped ensure the was familiar with the launch complex and recovery ship prior to missions to station.

Imaging Young Stellar Objects with VLTi/PIONIER

NASA Astrophysics Data System (ADS)

Kluska, J.; Malbet, F.; Berger, J.-P.; Benisty, M.; Lazareff, B.; Le Bouquin, J.-B.; Baron, F.; Dominik, C.; Isella, A.; Juhasz, A.; Kraus, S.; Lachaume, R.; Ménard, F.; Millan-Gabet, R.; Monnier, J.; Pinte, C.; Soulez, F.; Tallon, M.; Thi, W.-F.; Thiébaut, É.; Zins, G.

2014-04-01

Optical interferometry imaging is designed to help us to reveal complex astronomical sources without a prior model. Among these complex objects are the young stars and their environments, which have a typical morphology with a point-like source, surrounded by circumstellar material with unknown morphology. To image them, we have developed a numerical method that removes completely the stellar point source and reconstructs the rest of the image, using the differences in the spectral behavior between the star and its circumstellar material. We aim to reveal the first Astronomical Units of these objects where many physical phenomena could interplay: the dust sublimation causing a puffed-up inner rim, a dusty halo, a dusty wind or an inner gaseous component. To investigate more deeply these regions, we carried out the first Large Program survey of HAeBe stars with two main goals: statistics on the geometry of these objects at the first astronomical unit scale and imaging their very close environment. The images reveal the environment, which is not polluted by the star and allows us to derive the best fit for the flux ratio and the spectral slope. We present the first images from this survey and the application of the imaging method on other astronomical objects.

How to Identify Success Among Networks That Promote Active Living

PubMed Central

Varda, Danielle; Reed, Hannah; Retrum, Jessica; Tabak, Rachel; Gustat, Jeanette; O'Hara Tompkins, Nancy

2015-01-01

Objectives. We evaluated organization- and network-level factors that influence organizations’ perceived success. This is important for managing interorganizational networks, which can mobilize communities to address complex health issues such as physical activity, and for achieving change. Methods. In 2011, we used structured interview and network survey data from 22 states in the United States to estimate multilevel random-intercept models to understand organization- and network-level factors that explain perceived network success. Results. A total of 53 of 59 “whole networks” met the criteria for inclusion in the analysis (89.8%). Coordinators identified 559 organizations, with 3 to 12 organizations from each network taking the online survey (response rate = 69.7%; range = 33%–100%). Occupying a leadership position (P < .01), the amount of time with the network (P < .05), and support from community leaders (P < .05) emerged as correlates of perceived success. Conclusions. Organizations’ perceptions of success can influence decisions about continuing involvement and investment in networks designed to promote environment and policy change for active living. Understanding these factors can help leaders manage complex networks that involve diverse memberships, varied interests, and competing community-level priorities. PMID:26378863

Problem based learning - A brief review

NASA Astrophysics Data System (ADS)

Nunes, Sandra; Oliveira, Teresa A.; Oliveira, Amílcar

2017-07-01

Teaching is a complex mission that requires not only the theoretical knowledge transmission, but furthermore requires to provide the students the necessary skills for solving real problems in their respective professional activities where complex issues and problems must be frequently faced. Over more than twenty years we have been experiencing an increase in scholar failure in the scientific area of mathematics, which means that Teaching Mathematics and related areas can be even a more complex and hard task. Scholar failure is a complex phenomenon that depends on various factors as social factors, scholar factors or biophysical factors. After numerous attempts made in order to reduce scholar failure our goal in this paper is to understand the role of "Problem Based Learning" and how this methodology can contribute to the solution of both: increasing mathematical courses success and increasing skills in the near future professionals in Portugal. Before designing a proposal for applying this technique in our institutions, we decided to conduct a survey to provide us with the necessary information about and the respective advantages and disadvantages of this methodology, so this is the brief review aim.

78 FR 36183 - State Allotment Percentages for the Drinking Water State Revolving Fund Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... participated in both the design of the survey and in the collection of data. The survey examined the needs of... findings from the 2007 survey by adjusting to 2011 dollars. The sample design for the survey and assessment... the unanimous recommendation of the State representatives who participated in the survey design. The...

A Survey on Security and Privacy in Emerging Sensor Networks: From Viewpoint of Close-Loop

PubMed Central

Zhang, Lifu; Zhang, Heng

2016-01-01

Nowadays, as the next generation sensor networks, Cyber-Physical Systems (CPSs) refer to the complex networked systems that have both physical subsystems and cyber components, and the information flow between different subsystems and components is across a communication network, which forms a closed-loop. New generation sensor networks are found in a growing number of applications and have received increasing attention from many inter-disciplines. Opportunities and challenges in the design, analysis, verification and validation of sensor networks co-exists, among which security and privacy are two important ingredients. This paper presents a survey on some recent results in the security and privacy aspects of emerging sensor networks from the viewpoint of the closed-loop. This paper also discusses several future research directions under these two umbrellas. PMID:27023559

D Topological Indoor Building Modeling Integrated with Open Street Map

NASA Astrophysics Data System (ADS)

Jamali, A.; Rahman, A. Abdul; Boguslawski, P.

2016-09-01

Considering various fields of applications for building surveying and various demands, geometry representation of a building is the most crucial aspect of a building survey. The interiors of the buildings need to be described along with the relative locations of the rooms, corridors, doors and exits in many kinds of emergency response, such as fire, bombs, smoke, and pollution. Topological representation is a challenging task within the Geography Information Science (GIS) environment, as the data structures required to express these relationships are particularly difficult to develop. Even within the Computer Aided Design (CAD) community, the structures for expressing the relationships between adjacent building parts are complex and often incomplete. In this paper, an integration of 3D topological indoor building modeling in Dual Half Edge (DHE) data structure and outdoor navigation network from Open Street Map (OSM) is presented.

From Laser Scanning to Finite Element Analysis of Complex Buildings by Using a Semi-Automatic Procedure

PubMed Central

Castellazzi, Giovanni; D’Altri, Antonio Maria; Bitelli, Gabriele; Selvaggi, Ilenia; Lambertini, Alessandro

2015-01-01

In this paper, a new semi-automatic procedure to transform three-dimensional point clouds of complex objects to three-dimensional finite element models is presented and validated. The procedure conceives of the point cloud as a stacking of point sections. The complexity of the clouds is arbitrary, since the procedure is designed for terrestrial laser scanner surveys applied to buildings with irregular geometry, such as historical buildings. The procedure aims at solving the problems connected to the generation of finite element models of these complex structures by constructing a fine discretized geometry with a reduced amount of time and ready to be used with structural analysis. If the starting clouds represent the inner and outer surfaces of the structure, the resulting finite element model will accurately capture the whole three-dimensional structure, producing a complex solid made by voxel elements. A comparison analysis with a CAD-based model is carried out on a historical building damaged by a seismic event. The results indicate that the proposed procedure is effective and obtains comparable models in a shorter time, with an increased level of automation. PMID:26225978

A critical look at national monitoring programs for birds and other wildlife species

USGS Publications Warehouse

Sauer, J.R.; O'Shea, T.J.; Bogon, M.A.

2003-01-01

Concerns?about declines in numerous taxa have created agreat deal of interest in survey development. Because birds have traditionally been monitored by a variety of methods, bird surveys form natural models for development of surveys for other taxa. Here I suggest that most bird surveys are not appropriate models for survey design. Most lack important design components associated with estimation of population parameters at sample sites or with sampling over space, leading to estimates that may be biased, I discuss the limitations of national bird monitoring programs designed to monitor population size. Although these surveys are often analyzed, careful consideration must be given to factors that may bias estimates but that cannot be evaluated within the survey. Bird surveys with appropriate designs have generally been developed as part of management programs that have specific information needs. Experiences gained from bird surveys provide important information for development of surveys for other taxa, and statistical developments in estimation of population sizes from counts provide new approaches to overcoming the limitations evident in many bird surveys. Design of surveys is a collaborative effort, requiring input from biologists, statisticians, and the managers who will use the information from the surveys.

Infographic Modeling Based on 3d Laser Surveying for Informed Universal Design in Archaeological Areas: the Case of Oppidum of the Ancient City of Tusculum

NASA Astrophysics Data System (ADS)

Cemoli, L.; D'Auria, S.; De Silla, F.; Pucci, S.; Strollo, R. M.

2017-08-01

The valorisation of archaeological sites represents a fundamental action for the social and economic development of a country. An archaeological park is often a territory characterized by significant testimonies of antiquity of great landscape value. For this reason, it should be configured as an authentic outdoor museum, enriched by natural, environmental, architectural and urban components. In order to fulfill these requirements, it is fundamental the elaboration of a coherent scientific project of preservation, fruition and valorisation of the area, which merge the different components necessary for the establishment of an archaeological museum-park. One of the most critical aspects related to the fruition of archaeological sites is the accessibility to areas and routes, not always - if ever - designed for people with reduced mobility, also temporary (for example elderly, obese, visually impaired, etc.). In general, an established principle used in the new design is to pay attention to the so-called wide users, in accordance with the international guidelines summarized in the concept of Universal Design. In particular, this paper presents the use of three-dimensional models obtained from laser scanning surveys for the design of walking trails for people with reduced mobility in the Tusculum Archaeological-Cultural Park. The work was based on the fundamental implementation of the three-dimensional survey with terrestrial laser scanning for the construction and the control of the complex morphology of the site, and on the subsequent integration of models of the intervention in the three-dimensional reality "as-built" of the site. The obtained infographic model allowed to study and simulate the impact of the routes for people with reduced mobility, and to verify its efficiency in the historical and landscape context. Moreover, it was possible to verify the construction of other facilities in the real conditions of the site.

Characterising reef fish populations and habitats within and outside the US Virgin Islands Coral Reef National Monument: A lesson in marine protected area design

USGS Publications Warehouse

Monaco, Mark E.; Friedlander, A.M.; Caldow, Chris; Christensen, J.D.; Rogers, C.; Beets, J.; Miller, J.; Boulon, Rafe

2007-01-01

Marine protected areas are an important tool for management of marine ecosystems. Despite their utility, ecological design criteria are often not considered or feasible to implement when establishing protected areas. In 2001, the Virgin Islands Coral Reef National Monument (VICRNM) in St John, US Virgin Islands was established by Executive Order. The VICRNM prohibits almost all extractive uses. Surveys of habitat and fishes inside and outside of the VICRNM were conducted in 2002-2004. Areas outside the VICRNM had significantly more hard corals, greater habitat complexity, and greater richness, abundance and biomass of reef fishes than areas within the VICRNM. The administrative process used to delineate the boundaries of the VICRNM did not include a robust ecological characterisation of the area. Because of reduced habitat complexity within the VICRNM, the enhancement of the marine ecosystem may not be fully realised or increases in economically important reef fishes may take longer to detect. ?? 2007 The Authors. Journal compilation ?? 2007 Blackwell Publishing Ltd.

Research Methods in Healthcare Epidemiology: Survey and Qualitative Research.

PubMed

Safdar, Nasia; Abbo, Lilian M; Knobloch, Mary Jo; Seo, Susan K

2016-11-01

Surveys are one of the most frequently employed study designs in healthcare epidemiology research. Generally easier to undertake and less costly than many other study designs, surveys can be invaluable to gain insights into opinions and practices in large samples and may be descriptive and/or be used to test associations. In this context, qualitative research methods may complement this study design either at the survey development phase and/or at the interpretation/extension of results stage. This methods article focuses on key considerations for designing and deploying surveys in healthcare epidemiology and antibiotic stewardship, including identification of whether or not de novo survey development is necessary, ways to optimally lay out and display a survey, denominator measurement, discussion of biases to keep in mind particularly in research using surveys, and the role of qualitative research methods to complement surveys. We review examples of surveys in healthcare epidemiology and antimicrobial stewardship and review the pros and cons of methods used. A checklist is provided to help aid design and deployment of surveys in healthcare epidemiology and antimicrobial stewardship. Infect Control Hosp Epidemiol 2016;1-6.

Research Methods in Healthcare Epidemiology: Survey and Qualitative Research

PubMed Central

Safdar, Nasia; Abbo, Lilian M.; Knobloch, Mary Jo; Seo, Susan K.

2017-01-01

Surveys are one of the most frequently employed study designs in healthcare epidemiology research. Generally easier to undertake and less costly than many other study designs, surveys can be invaluable to gain insights into opinions and practices in large samples and may be descriptive and/or be used to test associations. In this context, qualitative research methods may complement this study design either at the survey development phase and/or at the interpretation/extension of results stage. This methods article focuses on key considerations for designing and deploying surveys in healthcare epidemiology and antibiotic stewardship, including identification of whether or not de novo survey development is necessary, ways to optimally lay out and display a survey, denominator measurement, discussion of biases to keep in mind particularly in research using surveys, and the role of qualitative research methods to complement surveys. We review examples of surveys in healthcare epidemiology and antimicrobial stewardship and review the pros and cons of methods used. A checklist is provided to help aid design and deployment of surveys in healthcare epidemiology and antimicrobial stewardship. PMID:27514583

Assessment of Customer Service in Academic Health Care Libraries (ACSAHL): an instrument for measuring customer service*†

PubMed Central

Crossno, Jon E.; Berkins, Brenda; Gotcher, Nancy; Hill, Judith L.; McConoughey, Michelle; Walters, Mitchel

2001-01-01

Objectives: In a pilot study, the library had good results using SERVQUAL, a respected and often-used instrument for measuring customer satisfaction. The SERVQUAL instrument itself, however, received some serious and well-founded criticism from the respondents to our survey. The purpose of this study was to test the comparability of the results of SERVQUAL with a revised and shortened instrument modeled on SERVQUAL. The revised instrument, the Assessment of Customer Service in Academic Health Care Libraries (ACSAHL), was designed to better assess customer service in academic health care libraries. Methods: Surveys were sent to clients who had used the document delivery services at three academic medical libraries in Texas over the previous twelve to eighteen months. ACSAHL surveys were sent exclusively to clients at University of Texas (UT) Southwestern, while the client pools at the two other institutions were randomly divided and provided either SERVQUAL or ACSAHL surveys. Results: Results indicated that more respondents preferred the shorter ACSAHL instrument to the longer and more complex SERVQUAL instrument. Also, comparing the scores from both surveys indicated that ACSAHL elicited comparable results. Conclusions: ACSAHL appears to measure the same type of data in similar settings, but additional testing is recommended both to confirm the survey's results through data replication and to investigate whether the instrument applies to different service areas. PMID:11337948

75 FR 17428 - Notice of Proposed New Information Collection for Focus Groups for Non-use Valuation Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

... a nonuse valuation survey of the U.S. public. A key aspect of the survey design process is to use... use the results of these information collection activities to optimize the design of the survey... information to address several key questions relating to the survey and, in particular, the conjoint design...

Assessing health impacts in complex eco-epidemiological settings in the humid tropics: Modular baseline health surveys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winkler, Mirko S., E-mail: mirko.winkler@unibas.ch; University of Basel, P.O. Box, CH-4003 Basel; Divall, Mark J., E-mail: mdivall@shapeconsulting.org

2012-02-15

The quantitative assessment of health impacts has been identified as a crucial feature for realising the full potential of health impact assessment (HIA). In settings where demographic and health data are notoriously scarce, but there is a broad range of ascertainable ecological, environmental, epidemiological and socioeconomic information, a diverse toolkit of data collection strategies becomes relevant for the mainly small-area impacts of interest. We present a modular, cross-sectional baseline health survey study design, which has been developed for HIA of industrial development projects in the humid tropics. The modular nature of our toolkit allows our methodology to be readily adaptedmore » to the prevailing eco-epidemiological characteristics of a given project setting. Central to our design is a broad set of key performance indicators, covering a multiplicity of health outcomes and determinants at different levels and scales. We present experience and key findings from our modular baseline health survey methodology employed in 14 selected sentinel sites within an iron ore mining project in the Republic of Guinea. We argue that our methodology is a generic example of rapid evidence assembly in difficult-to-reach localities, where improvement of the predictive validity of the assessment and establishment of a benchmark for longitudinal monitoring of project impacts and mitigation efforts is needed.« less

Evaluation of a computer-based approach to teaching acid/base physiology.

PubMed

Rawson, Richard E; Quinlan, Kathleen M

2002-12-01

Because acid/base physiology is a difficult subject for most medical and veterinary students, the first author designed a software program, Acid/Base Primer, that would help students with this topic. The Acid/Base Primer was designed and evaluated within a conceptual framework of basic educational principles. Seventy-five first-year veterinary students (of 81; 93% response rate) participated in this study. Students took both a pre- and posttest of content understanding. After completing the Acid/Base Primer in pairs, each student filled out a survey evaluating the features of the program and describing his/her use and experience of it. Four pairs of students participated in interviews that elaborated on the surveys. Scores improved from 53 +/- 2% on the pretest to 74 +/- 1% on an immediate posttest. On surveys and in interviews, students reported that the program helped them construct their own understanding of acid/base physiology and prompted discussions in pairs of students when individual understandings differed. The case-based format provided anchors and a high degree of relevance. Repetition of concepts helped students develop a more complex network of understanding. Questions in the program served to scaffold the learning process by providing direction, accentuating the relevant features of the cases, and provoking discussion. Guidelines for software development were generated on the basis of the findings and relevant educational literature.

"Do I really want to do this?" Longitudinal cohort study participants' perspectives on postal survey design: a qualitative study.

PubMed

Harcombe, Helen; Derrett, Sarah; Herbison, Peter; McBride, David

2011-01-27

Randomised controlled trials have investigated aspects of postal survey design yet cannot elaborate on reasons behind participants' decision making and survey behaviour. This paper reports participants' perspectives of the design of, and participation in, a longitudinal postal cohort survey. It describes strengths and weaknesses in study design from the perspectives of study participants and aims to contribute to the: 1) design of future cohort surveys and questionnaires generally and, 2) design of cohort surveys for people with musculoskeletal disorders (MSDs) specifically. In-depth interviews explored the design of postal surveys previously completed by participants. Interviews used open ended questioning with a topic guide for prompts if areas of interest were not covered spontaneously. Thematic data analysis was undertaken based on the framework method. A second researcher verified all coding. Data from fourteen interviews were analysed within three main themes; participation, survey design and survey content. One of the main findings was the importance of clear communication aimed at the correct audience both when inviting potential participants to take part and within the survey itself. Providing enough information about the study, having a topic of interest and an explanation of likely benefits of the study were important when inviting people to participate. The neutrality of the survey and origination from a reputable source were both important; as was an explanation about why information was being collected within the survey itself. Study findings included participants' impressions when invited to take part, why they participated, the acceptability of follow-up of non-responders and why participants completed the follow-up postal survey. Also discussed were participants' first impression of the survey, its length, presentation and participants' views about specific questions within the survey. Ideas generated in this study provide an insight into participants' decision making and survey behaviour and may enhance the acceptability of future surveys to potential participants. As well as clear communication, participants valued incentives and survey questions that were relevant to them. However, opinions varied as to the preferred format for responses with some advising more opportunity for open-ended feedback. We also found that some standard format questions can raise quandaries for individual participants.

Facility Layout Problems Using Bays: A Survey

NASA Astrophysics Data System (ADS)

Davoudpour, Hamid; Jaafari, Amir Ardestani; Farahani, Leila Najafabadi

2010-06-01

Layout design is one of the most important activities done by industrial Engineers. Most of these problems have NP hard Complexity. In a basic layout design, each cell is represented by a rectilinear, but not necessarily convex polygon. The set of fully packed adjacent polygons is known as a block layout (Asef-Vaziri and Laporte 2007). Block layout is divided by slicing tree and bay layout. In bay layout, departments are located in vertical columns or horizontal rows, bays. Bay layout is used in real worlds especially in concepts such as semiconductor and aisles. There are several reviews in facility layout; however none of them focus on bay layout. The literature analysis given here is not limited to specific considerations about bay layout design. We present a state of art review for bay layout considering some issues such as the used objectives, the techniques of solving and the integration methods in bay.

APPROACHES TO GEOMETRIC DATA ANALYSIS ON BIG AREA ADDITIVELY MANUFACTURED (BAAM) PARTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dreifus, Gregory D; Ally, Nadya R; Post, Brian K

The promise of additive manufacturing is that a user can design and print complex geometries that are very difficult, if not impossible, to machine. The capabilities of 3D printing are restricted by a number of factors, including properties of the build material, time constraints, and geometric design restrictions. In this paper, a thorough accounting and study of the geometric restrictions that exist in the current iteration of additive manufacturing (AM) fused deposition modeling (FDM) technologies are discussed. Offline and online methodologies for collecting data sets for qualitative analysis of large scale AM, in particular Oak Ridge National Laboratory s (ORNL)more » big area additive manufacturing (BAAM) system, are summarized. In doing so, a survey of tools for designers and software developers is provided. In particular, strategies in which geometric data can be used as training sets for smarter AM technologies in the future are explained as well.« less

An Elective Course in Personal Finance for Health Care Professionals

PubMed Central

2009-01-01

Objectives To create, implement, and assess an elective course on the principles and applications of personal finance. Design A 1.5 unit (15 hours total) elective course was designed using active-learning pedagogy, lecture, and group discussion. Homework assignments were designed to provide practical tools and materials that students could individualize and apply to their personal financial goals. Assessment Student satisfaction, using a standard course evaluation form, revealed consistent high ratings. Student enrollment increased from 19 students in its initial year to 90 students in its fourth year. Student knowledge, assessed using the Jump$tart Financial Literacy Survey, indicated significant knowledge acquisition. Conclusion Many pharmacy students are ill equipped to effectively handle the complex financial decisions they face after graduation. This course provides students with practical tools to identify appropriate ways to achieve their financial goals and critically evaluate financial advice and advisors. PMID:19513143

High resolution seismic reflection profiling at Aberdeen Proving Grounds, Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, R.D.; Xia, Jianghai; Swartzel, S.

1996-11-01

The effectiveness of shallow high resolution seismic reflection (i.e., resolution potential) to image geologic interfaces between about 70 and 750 ft at the Aberdeen Proving Grounds, Maryland (APG), appears to vary locally with the geometric complexity of the unconsolidated sediments that overlay crystalline bedrock. The bedrock surface (which represents the primary geologic target of this study) was imaged at each of three test areas on walkaway noise tests and CDP (common depth point) stacked data. Proven high resolution techniques were used to design and acquire data on this survey. Feasibility of the technique and minimum acquisition requirements were determined throughmore » evaluation and correlation of walkaway noise tests, CDP survey lines, and a downhole velocity check shot survey. Data processing and analysis revealed several critical attributes of shallow seismic data from APG that need careful consideration and compensation on reflection data sets. This survey determined: (1) the feasibility of the technique, (2) the resolution potential (both horizontal and vertical) of the technique, (3) the optimum source for this site, (4) the optimum acquisition geometries, (5) general processing flow, and (6) a basic idea of the acoustic variability across this site. Source testing involved an accelerated weight drop, land air gun, downhole black powder charge, sledge hammer/plate, and high frequency vibrator. Shallow seismic reflection profiles provided for a more detailed picture of the geometric complexity and variability of the distinct clay sequences (aquatards), previously inferred from drilling to be present, based on sparse drill holes and basewide conceptual models. The seismic data also reveal a clear explanation for the difficulties previously noted in correlating individual, borehole-identified sand or clay units over even short distances.« less

National Structural Survey of Veterans Affairs Home-Based Primary Care Programs.

PubMed

Karuza, Jurgis; Gillespie, Suzanne M; Olsan, Tobie; Cai, Xeuya; Dang, Stuti; Intrator, Orna; Li, Jiejin; Gao, Shan; Kinosian, Bruce; Edes, Thomas

2017-12-01

To describe the current structural and practice characteristics of the Department of Veterans Affairs (VA) Home-Based Primary Care (HBPC) program. We designed a national survey and surveyed HBPC program directors on-line using REDCap. We received 236 surveys from 394 identified HBPC sites (60% response rate). HBPC site characteristics were quantified using closed-ended formats. HBPC program directors were most often registered nurses, and HBPC programs primarily served veterans with complex chronic illnesses that were at high risk of hospitalization and nursing home care. Primary care was delivered using interdisciplinary teams, with nurses, social workers, and registered dietitians as team members in more than 90% of the sites. Most often, nurse practitioners were the principal primary care providers (PCPs), typically working with nurse case managers. Nearly 60% of the sites reported dual PCPs involving VA and community-based physicians. Nearly all sites provided access to a core set of comprehensive services and programs (e.g., case management, supportive home health care). At the same time, there were variations according to site (e.g., size, location (urban, rural), use of non-VA hospitals, primary care models used). HBPC sites reflected the rationale and mission of HBPC by focusing on complex chronic illness of home-based veterans and providing comprehensive primary care using interdisciplinary teams. Our next series of studies will examine how HBPC site structural characteristics and care models are related to the processes and outcomes of care to determine whether there are best practice standards that define an optimal HBPC structure and care model or whether multiple approaches to HBPC better serve the needs of veterans. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Book review: Bird census techniques, Second edition

USGS Publications Warehouse

Sauer, John R.

2002-01-01

Conservation concerns, federal mandates to monitor birds, and citizen science programs have spawned a variety of surveys that collect information on bird populations. Unfortunately, all too frequently these surveys are poorly designed and use inappropriate counting methods. Some of the flawed approaches reflect a lack of understanding of statistical design; many ornithologists simply are not aware that many of our most entrenched counting methods (such as point counts) cannot appropriately be used in studies that compare densities of birds over space and time. It is likely that most of the readers of The Condor have participated in a bird population survey that has been criticized for poor sampling methods. For example, North American readers may be surprised to read in Bird Census Techniques that the North American Breeding Bird Survey 'is seriously flawed in its design,' and that 'Analysis of trends is impossible from points that are positioned along roads' (p. 109). Our conservation efforts are at risk if we do not acknowledge these concerns and improve our survey designs. Other surveys suffer from a lack of focus. In Bird Census Techniques, the authors emphasize that all surveys require clear statements of objectives and an understanding of appropriate survey designs to meet their objectives. Too often, we view survey design as the realm of ornithologists who know the life histories and logistical issues relevant to counting birds. This view reflects pure hubris: survey design is a collaboration between ornithologists, statisticians, and managers, in which goals based on management needs are met by applying statistical principles for design to the biological context of the species of interest. Poor survey design is often due to exclusion of some of these partners from survey development. Because ornithologists are too frequently unaware of these issues, books such as Bird Census Techniques take on added importance as manuals for educating ornithologists about the relevance of survey design and methods and the often subtle interdisciplinary nature of surveys.Review info: Bird Census Techniques, Second Edition. By Colin J. Bibby, Neil D. Burgess, David A. Hill, and Simon H. Mustoe. 2000. Academic Press, London, UK. xvii 1 302 pp.  ISBN 0- 12-095831-7.

Using the cognitive interviewing process to improve survey design by allied health: A qualitative study.

PubMed

Howlett, Owen; McKinstry, Carol; Lannin, Natasha A

2018-04-01

Allied health professionals frequently use surveys to collect data for clinical practice and service improvement projects. Careful development and piloting of purpose-designed surveys is important to ensure intended measuring (that respondents correctly interpret survey items when responding). Cognitive interviewing is a specific technique that can improve the design of self-administered surveys. The aim of this study was to describe the use of the cognitive interviewing process to improve survey design, which involved a purpose-designed, online survey evaluating staff use of functional electrical stimulation. A qualitative study involving one round of cognitive interviewing with three occupational therapists and three physiotherapists. The cognitive interviewing process identified 11 issues with the draft survey, which could potentially influence the validity and quality of responses. The raised issues included difficulties with: processing the question to be able to respond, determining a response to the question, retrieving relevant information from memory and comprehending the written question. Twelve survey amendments were made following the cognitive interviewing process, comprising four additions, seven revisions and one correction. The cognitive interviewing process applied during the development of a purpose-designed survey enabled the identification of potential problems and informed revisions to the survey prior to its use. © 2017 Occupational Therapy Australia.

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

76 FR 36513 - Notice of Intent to Request New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-22

... rate. In addition to offering mixed survey modes, the design will integrate multiple and mutually... examples of these design elements: The survey request will be distinguishable from other surveys and will... rewards or nonmonetary rewards. A key component of tailored survey design is considering and balancing how...

78 FR 8488 - Notice of Intent To Request New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-06

... rate. In addition to offering mixed survey modes, the design will integrate multiple and mutually... examples of these design elements: The survey request will be distinguishable from other surveys and will... nonmonetary rewards. A key component of tailored survey design is considering and balancing how features of...

76 FR 53398 - Notice of Intent To Request New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-26

... rate. In addition to offering mixed survey modes, the design will integrate multiple and mutually... examples of these design elements: The survey request will be distinguishable from other surveys and will... nonmonetary rewards. A key component of tailored survey design is considering and balancing how features of...

SIMULATION OF ASTRONOMICAL IMAGES FROM OPTICAL SURVEY TELESCOPES USING A COMPREHENSIVE PHOTON MONTE CARLO APPROACH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, J. R.; Peng, E.; Ahmad, Z.

2015-05-15

We present a comprehensive methodology for the simulation of astronomical images from optical survey telescopes. We use a photon Monte Carlo approach to construct images by sampling photons from models of astronomical source populations, and then simulating those photons through the system as they interact with the atmosphere, telescope, and camera. We demonstrate that all physical effects for optical light that determine the shapes, locations, and brightnesses of individual stars and galaxies can be accurately represented in this formalism. By using large scale grid computing, modern processors, and an efficient implementation that can produce 400,000 photons s{sup −1}, we demonstratemore » that even very large optical surveys can be now be simulated. We demonstrate that we are able to (1) construct kilometer scale phase screens necessary for wide-field telescopes, (2) reproduce atmospheric point-spread function moments using a fast novel hybrid geometric/Fourier technique for non-diffraction limited telescopes, (3) accurately reproduce the expected spot diagrams for complex aspheric optical designs, and (4) recover system effective area predicted from analytic photometry integrals. This new code, the Photon Simulator (PhoSim), is publicly available. We have implemented the Large Synoptic Survey Telescope design, and it can be extended to other telescopes. We expect that because of the comprehensive physics implemented in PhoSim, it will be used by the community to plan future observations, interpret detailed existing observations, and quantify systematics related to various astronomical measurements. Future development and validation by comparisons with real data will continue to improve the fidelity and usability of the code.« less

1995 American travel survey : an overview of the survey design and methodology

DOT National Transportation Integrated Search

1995-01-01

This paper describes the methods used in the 1995 ATS. The introduction provides an overview of : the purpose and objectives of the survey followed by a description of the survey and sample designs, survey field operations, and processing of survey d...

Using GIS to generate spatially balanced random survey designs for natural resource applications.

PubMed

Theobald, David M; Stevens, Don L; White, Denis; Urquhart, N Scott; Olsen, Anthony R; Norman, John B

2007-07-01

Sampling of a population is frequently required to understand trends and patterns in natural resource management because financial and time constraints preclude a complete census. A rigorous probability-based survey design specifies where to sample so that inferences from the sample apply to the entire population. Probability survey designs should be used in natural resource and environmental management situations because they provide the mathematical foundation for statistical inference. Development of long-term monitoring designs demand survey designs that achieve statistical rigor and are efficient but remain flexible to inevitable logistical or practical constraints during field data collection. Here we describe an approach to probability-based survey design, called the Reversed Randomized Quadrant-Recursive Raster, based on the concept of spatially balanced sampling and implemented in a geographic information system. This provides environmental managers a practical tool to generate flexible and efficient survey designs for natural resource applications. Factors commonly used to modify sampling intensity, such as categories, gradients, or accessibility, can be readily incorporated into the spatially balanced sample design.

A Critical Review of Surveys Emphasizing on Routing in Wireless Sensor Networks—An Anatomization under General Survey Design Framework

PubMed Central

2017-01-01

A large number of routing-related surveys are published so far for Wireless Sensor Networks (WSNs) that exhibit either complete or partial emphasis on routing in WSNs. These surveys classify and discuss the relevant routing protocols published mainly in the fields of classical, energy efficient, secure, hierarchical, geographic, intelligent, Quality of Service (QoS)-based and multipath WSNs. However, to the best of our knowledge, no study is presented so far which may clearly categorize the routing-related survey literature for WSNs.To fill this gap, an effort is made in this paper for presenting an in-depth review of already published routing-related survey literature in WSNs. Our review initially proposes a generalized survey design model and afterwards analyzes the routing-related survey literature in the light of the devised General Survey Design Framework (GSDF). Such an analysis describes the design soundness of the published routing-related surveys. Therefore, our review puts forth an original classification based on the frequency-of-survey-publication and taxonomizes the corresponding routing-related fields into high, medium and low focused areas of survey publication in WSNs. Furthermore, the surveys belonging to each main category are sub-categorized into various sub-classes and briefly discussed according to their design characteristics. On the one hand, this review is useful for beginners who may easily explore the already published routing-related survey literature in WSNs in a single document and investigate it by spending less effort. On the other hand, it is useful for expert researchers who may explore the trends and frequency of writing surveys in different areas of routing in WSNs. The experts may explore those areas of routing which are either neglected or least focused or lack in design soundness as per general survey design framework. In the end, insights and future research directions are outlined and a reasonable conclusion is put forth which may outline guiding principles for routing-related survey research in future. PMID:28933763

A Critical Review of Surveys Emphasizing on Routing in Wireless Sensor Networks-An Anatomization under General Survey Design Framework.

PubMed

Rehan, Waqas; Fischer, Stefan; Rehan, Maaz

2017-07-26

A large number of routing-related surveys are published so far for Wireless Sensor Networks (WSNs) that exhibit either complete or partial emphasis on routing in WSNs. These surveys classify and discuss the relevant routing protocols published mainly in the fields of classical, energy efficient, secure, hierarchical, geographic, intelligent, Quality of Service (QoS)-based and multipath WSNs. However, to the best of our knowledge, no study is presented so far which may clearly categorize the routing-related survey literature for WSNs.To fill this gap, an effort is made in this paper for presenting an in-depth review of already published routing-related survey literature in WSNs. Our review initially proposes a generalized survey design model and afterwards analyzes the routing-related survey literature in the light of the devised General Survey Design Framework (GSDF) . Such an analysis describes the design soundness of the published routing-related surveys. Therefore, our review puts forth an original classification based on the frequency-of-survey-publication and taxonomizes the corresponding routing-related fields into high, medium and low focused areas of survey publication in WSNs. Furthermore, the surveys belonging to each main category are sub-categorized into various sub-classes and briefly discussed according to their design characteristics. On the one hand, this review is useful for beginners who may easily explore the already published routing-related survey literature in WSNs in a single document and investigate it by spending less effort. On the other hand, it is useful for expert researchers who may explore the trends and frequency of writing surveys in different areas of routing in WSNs. The experts may explore those areas of routing which are either neglected or least focused or lack in design soundness as per general survey design framework. In the end, insights and future research directions are outlined and a reasonable conclusion is put forth which may outline guiding principles for routing-related survey research in future.

The Public Health Workforce Interests and Needs Survey: The First National Survey of State Health Agency Employees

PubMed Central

Sellers, Katie; Leider, Jonathon P.; Harper, Elizabeth; Castrucci, Brian C.; Bharthapudi, Kiran; Liss-Levinson, Rivka; Jarris, Paul E.; Hunter, Edward L.

2015-01-01

Context: Public health practitioners, policy makers, and researchers alike have called for more data on individual worker's perceptions about workplace environment, job satisfaction, and training needs for a quarter of a century. The Public Health Workforce Interests and Needs Survey (PH WINS) was created to answer that call. Objective: Characterize key components of the public health workforce, including demographics, workplace environment, perceptions about national trends, and perceived training needs. Design: A nationally representative survey of central office employees at state health agencies (SHAs) was conducted in 2014. Approximately 25 000 e-mail invitations to a Web-based survey were sent out to public health staff in 37 states, based on a stratified sampling approach. Balanced repeated replication weights were used to account for the complex sampling design. Setting and Participants: A total of 10 246 permanently employed SHA central office employees participated in PH WINS (46% response rate). Main Outcome Measures: Perceptions about training needs; workplace environment and job satisfaction; national initiatives and trends; and demographics. Results: Although the majority of staff said they were somewhat or very satisfied with their job (79%; 95% confidence interval [CI], 78-80), as well as their organization (65%; 95% CI, 64-66), more than 42% (95% CI, 41-43) were considering leaving their organization in the next year or retiring before 2020; 4% of those were considering leaving for another job elsewhere in governmental public health. The majority of public health staff at SHA central offices are female (72%; 95% CI, 71-73), non-Hispanic white (70%; 95% CI, 69-71), and older than 40 years (73%; 95% CI, 72-74). The greatest training needs include influencing policy development, preparing a budget, and training related to the social determinants of health. Conclusions: PH WINS represents the first nationally representative survey of SHA employees. It holds significant potential to help answer previously unaddressed questions in public health workforce research and provides actionable findings for SHA leaders. PMID:26422482

Physical activity and the rejuvenation of Connswater (PARC study): protocol for a natural experiment investigating the impact of urban regeneration on public health

PubMed Central

2013-01-01

Background There is a dearth of evidence regarding the impact of urban regeneration projects on public health, particularly the nature and degree to which urban regeneration impacts upon health-related behaviour change. Natural experiment methodology enables comprehensive large-scale evaluations of such interventions. The Connswater Community Greenway in Belfast is a major urban regeneration project involving the development of a 9 km linear park, including the provision of new cycle paths and walkways. In addition to the environmental improvements, this complex intervention involves a number of programmes to promote physical activity in the regenerated area. The project affords a unique opportunity to investigate the public health impact of urban regeneration. Methods/Design The evaluation framework was informed by the socio-ecological model and guided by the RE-AIM Framework. Key components include: (1) a quasi-experimental before-and-after survey of the Greenway population (repeated cross-sectional design), in tandem with data from a parallel Northern Ireland-wide survey for comparison; (2) an assessment of changes in the local built environment and of walkability using geographic information systems; (3) semi-structured interviews with a purposive sample of survey respondents, and a range of community stakeholders, before and after the regeneration project; and (4) a cost-effectiveness analysis. The primary outcome is change in proportion of individuals identified as being regularly physically active, according to the current UK recommendations. The RE-AIM Framework will be used to make an overall assessment of the impact of the Greenway on the physical activity behaviour of local residents. Discussion The Connswater Community Greenway provides a significant opportunity to achieve long-term, population level behaviour change. We argue that urban regeneration may be conceptualised meaningfully as a complex intervention comprising multiple components with the potential, individually and interactively, to affect the behaviour of a diverse population. The development and implementation of our comprehensive evaluation framework reflects this complexity and illuminates an approach to the empirical, rigorous evaluation of urban regeneration. More specifically, this study will add to the much needed evidence-base about the impact of urban regeneration on public health as well as having important implications for the development of natural experiment methodology. PMID:24103381

Computational Aeroelastic Modeling of Airframes and TurboMachinery: Progress and Challenges

NASA Technical Reports Server (NTRS)

Bartels, R. E.; Sayma, A. I.

2006-01-01

Computational analyses such as computational fluid dynamics and computational structural dynamics have made major advances toward maturity as engineering tools. Computational aeroelasticity is the integration of these disciplines. As computational aeroelasticity matures it too finds an increasing role in the design and analysis of aerospace vehicles. This paper presents a survey of the current state of computational aeroelasticity with a discussion of recent research, success and continuing challenges in its progressive integration into multidisciplinary aerospace design. This paper approaches computational aeroelasticity from the perspective of the two main areas of application: airframe and turbomachinery design. An overview will be presented of the different prediction methods used for each field of application. Differing levels of nonlinear modeling will be discussed with insight into accuracy versus complexity and computational requirements. Subjects will include current advanced methods (linear and nonlinear), nonlinear flow models, use of order reduction techniques and future trends in incorporating structural nonlinearity. Examples in which computational aeroelasticity is currently being integrated into the design of airframes and turbomachinery will be presented.

50 CFR 86.102 - How did the Service design the National Framework?

Code of Federal Regulations, 2013 CFR

2013-10-01

... design the National Framework? The Framework divides the survey into two components: boater survey, and boat access provider survey. (a) The purpose of the boater survey component is to identify boat user... 50 Wildlife and Fisheries 9 2013-10-01 2013-10-01 false How did the Service design the National...

50 CFR 86.102 - How did the Service design the National Framework?

Code of Federal Regulations, 2011 CFR

2011-10-01

... design the National Framework? The Framework divides the survey into two components: boater survey, and boat access provider survey. (a) The purpose of the boater survey component is to identify boat user... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false How did the Service design the National...

50 CFR 86.102 - How did the Service design the National Framework?

Code of Federal Regulations, 2012 CFR

2012-10-01

... design the National Framework? The Framework divides the survey into two components: boater survey, and boat access provider survey. (a) The purpose of the boater survey component is to identify boat user... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false How did the Service design the National...

50 CFR 86.102 - How did the Service design the National Framework?

Code of Federal Regulations, 2010 CFR

2010-10-01

... design the National Framework? The Framework divides the survey into two components: boater survey, and boat access provider survey. (a) The purpose of the boater survey component is to identify boat user... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false How did the Service design the National...

77 FR 22844 - Agency Information Collection Activity Under OMB Review: Uniform Criteria for State Observational...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-17

... the States have accumulated substantial experience in the design and implementation of these surveys... observational surveys is to include a specification of the survey design, to be reassessed and, if appropriate, updated every five (5) years, or earlier if the State so desires. The survey design specification will...

50 CFR 86.102 - How did the Service design the National Framework?

Code of Federal Regulations, 2014 CFR

2014-10-01

... design the National Framework? The Framework divides the survey into two components: boater survey, and boat access provider survey. (a) The purpose of the boater survey component is to identify boat user... 50 Wildlife and Fisheries 9 2014-10-01 2014-10-01 false How did the Service design the National...

Online Survey Design and Development: A Janus-Faced Approach

ERIC Educational Resources Information Center

Lauer, Claire; McLeod, Michael; Blythe, Stuart

2013-01-01

In this article we propose a "Janus-faced" approach to survey design--an approach that encourages researchers to consider how they can design and implement surveys more effectively using the latest web and database tools. Specifically, this approach encourages researchers to look two ways at once; attending to both the survey interface…

Engineering Hydrogel Microenvironments to Recapitulate the Stem Cell Niche.

PubMed

Madl, Christopher M; Heilshorn, Sarah C

2018-06-04

Stem cells are a powerful resource for many applications including regenerative medicine, patient-specific disease modeling, and toxicology screening. However, eliciting the desired behavior from stem cells, such as expansion in a naïve state or differentiation into a particular mature lineage, remains challenging. Drawing inspiration from the native stem cell niche, hydrogel platforms have been developed to regulate stem cell fate by controlling microenvironmental parameters including matrix mechanics, degradability, cell-adhesive ligand presentation, local microstructure, and cell-cell interactions. We survey techniques for modulating hydrogel properties and review the effects of microenvironmental parameters on maintaining stemness and controlling differentiation for a variety of stem cell types. Looking forward, we envision future hydrogel designs spanning a spectrum of complexity, ranging from simple, fully defined materials for industrial expansion of stem cells to complex, biomimetic systems for organotypic cell culture models.

American pika in a low-elevation lava landscape: expanding the known distribution of a temperature-sensitive species.

PubMed

Shinderman, Matt

2015-09-01

In 2010, the American pika (Ochotona princeps fenisex) was denied federal protection based on limited evidence of persistence in low-elevation environments. Studies in nonalpine areas have been limited to relatively few environments, and it is unclear whether patterns observed elsewhere (e.g., Bodie, CA) represent other nonalpine habitats. This study was designed to establish pika presence in a new location, determine distribution within the surveyed area, and evaluate influences of elevation, vegetation, lava complexity, and distance to habitat edge on pika site occupancy. In 2011 and 2012, we conducted surveys for American pika on four distinct subalpine lava flows of Newberry National Volcanic Monument, Oregon, USA. Field surveys were conducted at predetermined locations within lava flows via silent observation and active searching for pika sign. Site habitat characteristics were included as predictors of occupancy in multinomial regression models. Above and belowground temperatures were recorded at a subsample of pika detection sites. Pika were detected in 26% (2011) and 19% (2012) of survey plots. Seventy-four pika were detected outside survey plot boundaries. Lava complexity was the strongest predictor of pika occurrence, where pika were up to seven times more likely to occur in the most complicated lava formations. Pika were two times more likely to occur with increasing elevation, although they were found at all elevations in the study area. This study expands the known distribution of the species and provides additional evidence for persistence in nonalpine habitats. Results partially support the predictive occupancy model developed for pika at Craters of the Moon National Monument, another lava environment. Characteristics of the lava environment clearly influence pika site occupancy, but habitat variables reported as important in other studies were inconclusive here. Further work is needed to gain a better understanding of the species' current distribution and ability to persist under future climate conditions.

American pika in a low-elevation lava landscape: expanding the known distribution of a temperature-sensitive species

PubMed Central

Shinderman, Matt

2015-01-01

In 2010, the American pika (Ochotona princeps fenisex) was denied federal protection based on limited evidence of persistence in low-elevation environments. Studies in nonalpine areas have been limited to relatively few environments, and it is unclear whether patterns observed elsewhere (e.g., Bodie, CA) represent other nonalpine habitats. This study was designed to establish pika presence in a new location, determine distribution within the surveyed area, and evaluate influences of elevation, vegetation, lava complexity, and distance to habitat edge on pika site occupancy. In 2011 and 2012, we conducted surveys for American pika on four distinct subalpine lava flows of Newberry National Volcanic Monument, Oregon, USA. Field surveys were conducted at predetermined locations within lava flows via silent observation and active searching for pika sign. Site habitat characteristics were included as predictors of occupancy in multinomial regression models. Above and belowground temperatures were recorded at a subsample of pika detection sites. Pika were detected in 26% (2011) and 19% (2012) of survey plots. Seventy-four pika were detected outside survey plot boundaries. Lava complexity was the strongest predictor of pika occurrence, where pika were up to seven times more likely to occur in the most complicated lava formations. Pika were two times more likely to occur with increasing elevation, although they were found at all elevations in the study area. This study expands the known distribution of the species and provides additional evidence for persistence in nonalpine habitats. Results partially support the predictive occupancy model developed for pika at Craters of the Moon National Monument, another lava environment. Characteristics of the lava environment clearly influence pika site occupancy, but habitat variables reported as important in other studies were inconclusive here. Further work is needed to gain a better understanding of the species’ current distribution and ability to persist under future climate conditions. PMID:26380695

Determination of NRHP Eligibility for the Eisenhower Army Medical Center Complex at Fort Gordon, Georgia

DTIC Science & Technology

2016-12-01

30905 Under Project 450904, “NHPA Building Evaluations at Fort Gordon” ERDC/CERL TR-16-26 ii Abstract This document is an architectural survey of...Carlisle, and Wolff beginning in 1970, with plans finalized in 1971, and construction completed in 1975. This survey satisfies Section 110 of the...hospital complex was previously surveyed for exceptional importance under Criteria Consideration G1 of the NRHP in the Fort Gordon Cold War

New tools for evaluating LQAS survey designs

PubMed Central

2014-01-01

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the ‘grey region’ are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions. PMID:24528928

New tools for evaluating LQAS survey designs.

PubMed

Hund, Lauren

2014-02-15

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

23 CFR 1340.3 - Basic design requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2010-04-01 2010-04-01 false Basic design requirements. 1340.3 Section 1340.3...

23 CFR 1340.3 - Basic design requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.3 Basic design requirements. Surveys conducted in... requirement. The sample identified for the survey shall have a probability-based design such that estimates... 23 Highways 1 2011-04-01 2011-04-01 false Basic design requirements. 1340.3 Section 1340.3...

The health-related quality of life in long-term colorectal cancer survivors study: objectives, methods and patient sample.

PubMed

Mohler, M Jane; Coons, Stephen Joel; Hornbrook, Mark C; Herrinton, Lisa J; Wendel, Christopher S; Grant, Marcia; Krouse, Robert S

2008-07-01

The objective of this paper is to describe the complex mixed-methods design of a study conducted to assess health-related quality of life (HRQOL) outcomes and ostomy-related obstacles and adjustments among long-term (>5 years) colorectal cancer (CRC) survivors with ostomies (cases) and without ostomies (controls). In addition, details are provided regarding the study sample and the psychometric properties of the quantitative data collection measures used. Subsequent manuscripts will present the study findings. The study design involved a cross-sectional mail survey for collecting quantitative data and focus groups for collecting qualitative data. The study subjects were individuals identified as long-term CRC survivors within a community-based health maintenance organization's enrolled population. Focus groups comprised of cases were conducted. The groups were divided by gender and HRQOL high and low quartile contrasts (based on the mail survey data). The modified City of Hope Quality of Life (mCOH-QOL)-Ostomy and SF-36v2 questionnaires were used in the mail survey. An abridged version of the mCOH-QOL-Ostomy was used for the control subjects. Focus groups explored ostomy-related barriers to self-care, adaptation methods/skills, and advice for others with an ostomy. The survey response rate was 52% (679/1308) and 34 subjects participated in focus groups. The internal consistency reliability estimates for the mCOH-QOL-Ostomy and SF-36v2 questionnaires were very acceptable for group comparisons. In addition, evidence supports the construct validity of the abridged version of the mCOH-QOL-Ostomy. Study limitations include potential non-response bias and limited minority participation. We were able to successfully recruit long-term CRC survivors into this study and the psychometric properties of the quantitative measures used were quite acceptable. Mixed-methods designs, such as the one used in this study, may be useful in identification and further elucidation of common problems, coping strategies, and HRQOL outcomes among long-term cancer survivors.

The Health-Related Quality of Life in Long-Term Colorectal Cancer Survivors Study: objectives, methods, and patient sample

PubMed Central

Mohler, M. Jane; Coons, Stephen Joel; Hornbrook, Mark C.; Herrinton, Lisa J.; Wendel, Christopher S.; Grant, Marcia; Krouse, Robert S.

2008-01-01

Objectives The objective of this paper is to describe the complex mixed-methods design of a study conducted to assess health-related quality of life (HRQOL) outcomes and ostomy-related obstacles and adjustments among long-term (>five years) colorectal cancer (CRC) survivors with ostomies (cases) and without ostomies (controls). In addition, details are provided regarding the study sample and the psychometric properties of the quantitative data collection measures used. Subsequent manuscripts will present the study findings. Research Design and Methods The study design involved a cross-sectional mail survey for collecting quantitative data and focus groups for collecting qualitative data. The study subjects were individuals identified as long-term CRC survivors within a community-based health maintenance organization's enrolled population. Focus groups comprised of cases and divided by gender and HRQOL high and low quartile contrasts (based on the mail survey data) were conducted. Main Outcome Measures The modified City of Hope Quality of Life (mCOH-QOL)-Ostomy and SF-36v2 questionnaires were used in the mail survey. An abridged version of the mCOH-QOL-Ostomy was used for the control subjects. Focus groups explored ostomy-related barriers to self-care, adaptation methods/skills, and advice for others with an ostomy. Results The survey response rate was 52% (679/1308) and 34 subjects participated in focus groups. The internal consistency reliability estimates for the mCOH-QOL-Ostomy and SF-36v2 questionnaires were very acceptable for group comparisons. In addition, evidence supports the construct validity of the abridged version of the mCOH-QOL-Ostomy. Study limitations include potential non-response bias and limited minority participation. Conclusions We were able to successfully recruit long-term CRC survivors into this study and the psychometric properties of the quantitative measures used were quite acceptable. Mixed-methods designs, such as the one used in this study, may be useful in identification and further elucidation of common problems, coping strategies, and HRQOL outcomes among long-term cancer survivors. PMID:18544186

Applying 3D Full Waveform Inversion in resolving fracture damage zones around a modelled geological disposal facility in granite

NASA Astrophysics Data System (ADS)

Bentham, H. L. M.; Morgan, J. V.; Angus, D. A.

2016-12-01

The UK has a large volume of high level and intermediate level radioactive waste and government policy is to dispose of this waste in a Geological Disposal Facility (GDF). This will be a highly-engineered facility capable of isolating radioactive waste within multiple protective barriers, deep underground, to ensure that no harmful quantities of radioactivity ever reach the surface environment. Although no specific GDF site in the UK has been chosen, granite is one of the candidate host rocks due to its strength, in engineering terms, and because of its low permeability in consideration of groundwater movement. We design time-lapse seismic surveys to characterise geological models of naturally fractured granite with GDF-related tunnel damage zones at a potential disposal depth of 1000 m (the UK GDF might be shallower). Additionally, we use effective medium models to calculate the velocity change when the fracture density is increased in the damage zones, and find a reduction of 60 m/s in P-wave velocity when the fracture density is doubled. Next, we simulate seismic surveys and apply 3D Full Waveform Inversion (FWI) to see how well we can recover the low-velocity damage zones. Furthermore we evaluate the effectiveness of using a survey design consisting of surface and tunnel receivers (a combined array) to resolve the target. After applying FWI we find the velocity anomaly within the damage zone can be resolved to within 2 m/s (3%) and the shape of the damage zone is resolved to 12.5 m (within a single grid cell). Using the combined array we are able to resolve the anomaly strength and shape more completely. When we add further complexity to the model by including tunnel infrastructure, we conclude the combined array is essential in recovering the tunnel damage zone. Our findings show that it is beneficial to use 3D FWI and novel survey designs for characterising subtle variations as may be present in granite, information that could assist in the GDF site selection process and also with GDF design.

Kinetic modeling of cell metabolism for microbial production.

PubMed

Costa, Rafael S; Hartmann, Andras; Vinga, Susana

2016-02-10

Kinetic models of cellular metabolism are important tools for the rational design of metabolic engineering strategies and to explain properties of complex biological systems. The recent developments in high-throughput experimental data are leading to new computational approaches for building kinetic models of metabolism. Herein, we briefly survey the available databases, standards and software tools that can be applied for kinetic models of metabolism. In addition, we give an overview about recently developed ordinary differential equations (ODE)-based kinetic models of metabolism and some of the main applications of such models are illustrated in guiding metabolic engineering design. Finally, we review the kinetic modeling approaches of large-scale networks that are emerging, discussing their main advantages, challenges and limitations. Copyright © 2015 Elsevier B.V. All rights reserved.

Design-based and model-based inference in surveys of freshwater mollusks

USGS Publications Warehouse

Dorazio, R.M.

1999-01-01

Well-known concepts in statistical inference and sampling theory are used to develop recommendations for planning and analyzing the results of quantitative surveys of freshwater mollusks. Two methods of inference commonly used in survey sampling (design-based and model-based) are described and illustrated using examples relevant in surveys of freshwater mollusks. The particular objectives of a survey and the type of information observed in each unit of sampling can be used to help select the sampling design and the method of inference. For example, the mean density of a sparsely distributed population of mollusks can be estimated with higher precision by using model-based inference or by using design-based inference with adaptive cluster sampling than by using design-based inference with conventional sampling. More experience with quantitative surveys of natural assemblages of freshwater mollusks is needed to determine the actual benefits of different sampling designs and inferential procedures.

Lessons Learned in Evaluating a Multisite, Comprehensive Teen Dating Violence Prevention Strategy: Design and Challenges of the Evaluation of Dating Matters: Strategies to Promote Healthy Teen Relationships.

PubMed

Niolon, Phyllis Holditch; Taylor, Bruce G; Latzman, Natasha E; Vivolo-Kantor, Alana M; Valle, Linda Anne; Tharp, Andra T

2016-03-01

This paper describes the multisite, longitudinal cluster randomized controlled trial (RCT) design of the evaluation of the Dating Matters: Strategies to Promote Healthy Relationships initiative, and discusses challenges faced in conducting this evaluation. Health departments in 4 communities are partnering with middle schools in high-risk, urban communities to implement 2 models of teen dating violence (TDV) prevention over 4 years. Schools were randomized to receive either the Dating Matters comprehensive strategy or the "standard of care" strategy (an existing, evidence-based TDV prevention curriculum). Our design permits comparison of the relative effectiveness of the comprehensive and standard of care strategies. Multiple cohorts of students from 46 middle schools are surveyed in middle school and high school, and parents and educators from participating schools are also surveyed. Challenges discussed in conducting a multisite RCT include site variability, separation of implementation and evaluation responsibilities, school retention, parent engagement in research activities, and working within the context of high-risk urban schools and communities. We discuss the strengths and weaknesses of our approaches to these challenges in the hopes of informing future research. Despite multiple challenges, the design of the Dating Matters evaluation remains strong. We hope this paper provides researchers who are conducting complex evaluations of behavioral interventions with thoughtful discussion of the challenges we have faced and potential solutions to such challenges.

Reconciling research and community priorities in participatory trials: application to Padres Informados/Jovenes Preparados.

PubMed

Allen, Michele L; Garcia-Huidobro, Diego; Bastian, Tiana; Hurtado, G Ali; Linares, Roxana; Svetaz, María Veronica

2017-06-01

Participatory research (PR) trials aim to achieve the dual, and at times competing, demands of producing an intervention and research process that address community perspectives and priorities, while establishing intervention effectiveness. To identify research and community priorities that must be reconciled in the areas of collaborative processes, study design and aim and study implementation quality in order to successfully conduct a participatory trial. We describe how this reconciliation was approached in the smoking prevention participatory trial Padres Informados/Jovenes Preparados (Informed Parents/Prepared Youth) and evaluate the success of our reconciled priorities. Data sources to evaluate success of the reconciliations included a survey of all partners regarding collaborative group processes, intervention participant recruitment and attendance and surveys of enrolled study participants assessing intervention outcomes. While we successfully achieved our reconciled collaborative processes and implementation quality goals, we did not achieve our reconciled goals in study aim and design. Due in part to the randomized wait-list control group design chosen in the reconciliation process, we were not able to demonstrate overall efficacy of the intervention or offer timely services to families in need of support. Achieving the goals of participatory trials is challenging but may yield community and research benefits. Innovative research designs are needed to better support the complex goals of participatory trials. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

An international perspective: job satisfaction among transplant nurses.

PubMed

Russell, Cynthia L; Van Gelder, Frank

2008-03-01

The high demand for transplant nurses across the world leads us to examine job design and job satisfaction because job satisfaction is linked to better outcomes for patients. To describe international transplant nurses' perspectives of job design and job satisfaction by using Herzberg's theory of motivation. Descriptive, correlational design. An electronic version of the Job Design and Job Satisfaction survey was mailed to all members of the International Transplant Nurses Society. A total of 331 members of the International Transplant Nurses Society responded to the survey. The mean age of respondents was 44.12 years, they had worked a mean of 19.12 years in nursing and 10.22 years in transplantation, and 50.6% of respondents were transplant nurse coordinators. Respondents were very satisfied overall with their jobs; they perceived that transplant nursing requires a high level of nonrepetitive, complex skills, autonomy in personal initiative and judgment, cooperation and collaboration with others, and that the job allows for completion of the work. Respondents were satisfied with pay, fringe benefits, and supervision. The feeling that the job could positively and significantly affect others was very strong. Results of this study provide empirical evidence supporting the perceived benefits and challenges of working in transplantation and support Herzberg's theory that motivators leading to job satisfaction include achievement, recognition, the work itself, responsibility, and advancement. Transplant nursing includes many of these motivators and desirable characteristics, including autonomy and working with a multidisciplinary team on a clear, patient-centered goal.

Lessons Learned in Evaluating a Multisite, Comprehensive Teen Dating Violence Prevention Strategy: Design and Challenges of the Evaluation of Dating Matters: Strategies to Promote Healthy Teen Relationships

PubMed Central

Niolon, Phyllis Holditch; Taylor, Bruce G.; Latzman, Natasha E.; Vivolo-Kantor, Alana M.; Valle, Linda Anne; Tharp, Andra T.

2018-01-01

Objective This paper describes the multisite, longitudinal cluster randomized controlled trial (RCT) design of the evaluation of the Dating Matters: Strategies to Promote Healthy Relationships initiative, and discusses challenges faced in conducting this evaluation. Method Health departments in 4 communities are partnering with middle schools in high-risk, urban communities to implement 2 models of teen dating violence (TDV) prevention over 4 years. Schools were randomized to receive either the Dating Matters comprehensive strategy or the “standard of care” strategy (an existing, evidence-based TDV prevention curriculum). Our design permits comparison of the relative effectiveness of the comprehensive and standard of care strategies. Multiple cohorts of students from 46 middle schools are surveyed in middle school and high school, and parents and educators from participating schools are also surveyed. Results Challenges discussed in conducting a multisite RCT include site variability, separation of implementation and evaluation responsibilities, school retention, parent engagement in research activities, and working within the context of high-risk urban schools and communities. We discuss the strengths and weaknesses of our approaches to these challenges in the hopes of informing future research. Conclusions Despite multiple challenges, the design of the Dating Matters evaluation remains strong. We hope this paper provides researchers who are conducting complex evaluations of behavioral interventions with thoughtful discussion of the challenges we have faced and potential solutions to such challenges. PMID:29607239

77 FR 20550 - Uniform Criteria for State Observational Surveys of Seat Belt Use

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... in calendar year 2012 to use a survey design that was approved under the old uniform criteria or, at their election, use a survey design approved under the revised uniform criteria. In calendar year 2013, all States must use a survey design approved under the revised uniform criteria. DATES: This final...

78 FR 5459 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding... CAHPS[supreg] Survey Design Principles and implementation instructions will be based on those for CAHPS... 26, 2013. ADDRESSES: In responding to this solicitation, please reply via email to AmbSurgSurvey@cms...

Development of a Composite Tailoring Procedure for Airplane Wings

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi

2000-01-01

The quest for finding optimum solutions to engineering problems has existed for a long time. In modern times, the development of optimization as a branch of applied mathematics is regarded to have originated in the works of Newton, Bernoulli and Euler. Venkayya has presented a historical perspective on optimization in [1]. The term 'optimization' is defined by Ashley [2] as a procedure "...which attempts to choose the variables in a design process so as formally to achieve the best value of some performance index while not violating any of the associated conditions or constraints". Ashley presented an extensive review of practical applications of optimization in the aeronautical field till about 1980 [2]. It was noted that there existed an enormous amount of published literature in the field of optimization, but its practical applications in industry were very limited. Over the past 15 years, though, optimization has been widely applied to address practical problems in aerospace design [3-5]. The design of high performance aerospace systems is a complex task. It involves the integration of several disciplines such as aerodynamics, structural analysis, dynamics, and aeroelasticity. The problem involves multiple objectives and constraints pertaining to the design criteria associated with each of these disciplines. Many important trade-offs exist between the parameters involved which are used to define the different disciplines. Therefore, the development of multidisciplinary design optimization (MDO) techniques, in which different disciplines and design parameters are coupled into a closed loop numerical procedure, seems appropriate to address such a complex problem. The importance of MDO in successful design of aerospace systems has been long recognized. Recent developments in this field have been surveyed by Sobieszczanski-Sobieski and Haftka [6].

"Do I really want to do this?" Longitudinal cohort study participants' perspectives on postal survey design: a qualitative study

PubMed Central

2011-01-01

Background Randomised controlled trials have investigated aspects of postal survey design yet cannot elaborate on reasons behind participants' decision making and survey behaviour. This paper reports participants' perspectives of the design of, and participation in, a longitudinal postal cohort survey. It describes strengths and weaknesses in study design from the perspectives of study participants and aims to contribute to the: 1) design of future cohort surveys and questionnaires generally and, 2) design of cohort surveys for people with musculoskeletal disorders (MSDs) specifically. Methods In-depth interviews explored the design of postal surveys previously completed by participants. Interviews used open ended questioning with a topic guide for prompts if areas of interest were not covered spontaneously. Thematic data analysis was undertaken based on the framework method. A second researcher verified all coding. Results Data from fourteen interviews were analysed within three main themes; participation, survey design and survey content. One of the main findings was the importance of clear communication aimed at the correct audience both when inviting potential participants to take part and within the survey itself. Providing enough information about the study, having a topic of interest and an explanation of likely benefits of the study were important when inviting people to participate. The neutrality of the survey and origination from a reputable source were both important; as was an explanation about why information was being collected within the survey itself. Study findings included participants' impressions when invited to take part, why they participated, the acceptability of follow-up of non-responders and why participants completed the follow-up postal survey. Also discussed were participants' first impression of the survey, its length, presentation and participants' views about specific questions within the survey. Conclusions Ideas generated in this study provide an insight into participants' decision making and survey behaviour and may enhance the acceptability of future surveys to potential participants. As well as clear communication, participants valued incentives and survey questions that were relevant to them. However, opinions varied as to the preferred format for responses with some advising more opportunity for open-ended feedback. We also found that some standard format questions can raise quandaries for individual participants. PMID:21269515

Ethnic differences in mental illness and mental health service use among Black fathers.

PubMed

Doyle, Otima; Joe, Sean; Caldwell, Cleopatra H

2012-05-01

We have presented nationally representative data on the prevalence and correlates of mental illness and mental health service use among African American and Caribbean Black (US-born and foreign-born) fathers in the United States. We have reported national estimates of lifetime and 12-month prevalence rates of mental illness, correlates, and service use among African American (n = 1254) and Caribbean Black (n = 633) fathers using data from the National Survey of American Life, a national household survey of Black Americans. We used bivariate cross-tabulations and Cox proportional hazards regression approaches and adjusted for the National Survey of American Life's complex sample design. The prevalence of mental illness, sociodemographic correlates, and service use among Black fathers varied by ethnicity and nativity. US-born Caribbean Black fathers had alarmingly high rates of most disorders, including depression, anxiety, and substance disorders. Mental health service use was particularly low for African American and foreign-born Caribbean Black fathers. These results demonstrate the need for more research on the causes and consequences of mental illness and the help-seeking behavior of ethnically diverse Black fathers.

Poly-Tobacco Use among High School Students

PubMed Central

Kowitt, Sarah D.; Patel, Tanha; Ranney, Leah M.; Huang, Li-Ling; Sutfin, Erin L.; Goldstein, Adam O.

2015-01-01

Although cigarette use by adolescents is declining, emerging tobacco products are becoming increasingly popular and youth may use more than one type of tobacco product. The purposes of this study were: (1) to assess patterns of poly-tobacco use among a representative sample of high school students and (2) to determine how beliefs correlate with poly-tobacco use. Data came from the 2013 North Carolina Youth Tobacco Survey (n = 4092). SAS logistic regression survey procedures were used to account for the complex survey design and sampling weights. Among all high school students in NC in 2013, 29.7% reported current any tobacco use, with 19.1% reporting current poly-tobacco use, and 10.6% reporting current use of only one product. Among poly-tobacco users, 59.3% reported that one of the products they currently used was cigarettes. Positive tobacco product beliefs were found to be significantly associated with poly-tobacco use. Communication campaigns, policy efforts, and future research are needed for prevention, regulation, and control of poly-tobacco use among adolescents, which represents a significant public health problem. PMID:26580636

Occurrence and impact of xerostomia among dentate adult New Zealanders: findings from a national survey.

PubMed

Benn, A M L; Broadbent, J M; Thomson, W M

2015-09-01

We investigated the prevalence, associations and impact of xerostomia in a nationally representative sample of dentate adult community-dwelling New Zealanders aged 18 years and over. The data were collected from a representative sample of 2209 adults, as part of the 2009 New Zealand Oral Health Survey (NZOHS). Data were collected using face-to-face interviews, dental examinations and the short-form Oral Health Impact Profile (OHIP-14). Data analysis used appropriate weighting for all procedures to account for the complex survey design. The overall prevalence estimate for xerostomia was 13.1% (95% CI 11.7, 14.7), and it was more common among females. Those in the 75+  and 25-34 age groups were more likely (odds ratios of 6.5 and 4.0, respectively) to have xerostomia. After controlling for sociodemographic characteristics and clinical oral disease, the mean OHIP-14 score among xerostomics was 50% higher than among those who did not have the condition. These data indicate that xerostomia is a common condition which can affect quality of life among people of all ages. © 2015 Australian Dental Association.

FAST in Space: Considerations for a Multibeam, Multipurpose Survey Using China's 500-m Aperture Spherical Radio Telescope (FAST)

NASA Astrophysics Data System (ADS)

Li, Di; Wang, Pei; Qian, Lei; Krco, Marko; Jiang, Peng; Yue, Youling; Jin, Chenjin; Zhu, Yan; Pan, Zhichen; Nan, Rendong; Dunning, Alex

2018-04-01

Having achieved "first light" immediately prior to the ceremony introducing it on 25 September 2016, China's 500-m aperture spherical radio telescope (FAST) is now being kept busy with commissions. Its innovative design requires 1,000 points to be measured and driven instead of just the two axes of motion, e.g., azimuth and elevation for most conventional antennas, to realize pointing and tracking. We have devised a survey plan to exploit the full sensitivity of FAST, while minimizing the complexities involved during system operation. The 19-beam L-band focal plan array will be rotated to specific angles and receive continuous data streams, while the surface shape and the focal cabin stay fixed. Such a survey will cover the northern sky in about 220 full days. Our aim is to obtain data simultaneously for pulsar search, detection of neutral hydrogen (HI) galaxies, HI imaging, and radio transients through multiple back ends. These data sets could represent a significant contribution to all related fields in radio astronomy and remain relevant for decades.

Post-Earthquake Multibeam Bathymetry and Backscatter Survey of 6400 sq. km. of the Accretionary Complex / Forearc in the Area of the Main 12 Sept. 07 Earthquake Rupture Zone

NASA Astrophysics Data System (ADS)

Orange, D. L.; Teas, P. A.; Decker, J.; Baillie, P.; Djajadihardja, Y. S.; Danque, H.; Digby, A.; Rathore, S.; Patton, J.

2007-12-01

When the 12 September M8.4 Southern Sumatra Earthquake hit, TGS-Nopec was carrying out a multibeam survey in the Sunda Straits, between Java and Sumatra. Working in collaboration with UTIG, OSU, BGR, and BPPT, we designed a 48 hour target-of-opportunity survey in the forearc region of the earthquake in an area where two trench perpendicular multibeam and seismic lines had previously been acquired by BGR. The objectives of the survey were to fill in an area of previously unsurveyed seafloor, and to acquire a data set for before and after comparison with the BGR data. Approx. 1100 line km of multibeam data were acquired between 17 and 20 September on a series of trench-perpendicular lines spaced 8km apart (weather limitations constrained the line orientation). Steep slopes and high backscatter seafloor result in some areas of data dropout. Using a fixed swath width and equi-distant beam spacing, bathymetric grids have been created at a range of scales that provide detailed imagery of the seafloor. The toe of slope is at ~6000m, with several normal faults cutting the seafloor on the incoming plate. The toe region of the accretionary complex shows individual folds 10-40km long, with both seaward and landward vergence. Fold wavelength is ~4km, with fold axes showing a trend slightly oblique to structures higher up on the accretionary complex. The folds in the toe region are cut by ENE trending high angle faults. 20km landward of the toe, in water depths of 5000-3000m, there is a 10km wide region of complex geomorphology and steeper slopes (locally 20 degrees and higher) showing a more degraded character with numerous slump headscarps and linear canyons 5-10km long. Although the slope is dissected by numerous slumps we observe no evidence for recent slope failure in the adjacent forearc basins. We interpret this region to be the seafloor projection of a significant thrust ramp in the accretionary complex. Landward of this area we identify 2 continuous ridges over 80km long, but that in detail show an irregular seafloor morphology. At 2500m water depth, 65km from the toe of slope, a significant geomorphic break with 10-20 degree slopes extends the length of the survey area, with water depths shoaling to 800m. We interpret this to be the surface projection of an out-of-sequence thrust. Although we identify some large debris blocks (>1km in length) in the adjacent forearc basin, the blocks appear rounded, with no obvious source or associated smaller scale debris that would suggest relatively recent emplacement. We find no clear evidence for any large recent slope failures associated with the M8.4 Earthquake or its aftershocks.

KSC-08pd3754

NASA Image and Video Library

2008-11-18

CAPE CANAVERAL, Fla. – Workers at Launch Complex 17-B on Cape Canaveral Air Force Station in Florida place the large patch that describes the Kepler spacecraft mission to be launched on the Delta 2 rocket. The Kepler mission is specifically designed to survey our region of the Milky Way galaxy to discover hundreds of Earth-size and smaller planets in or near the habitable zone and determine how many of the billions of stars in our galaxy have such planets. Results from this mission will allow us to place our solar system within the continuum of planetary systems in the Galaxy. Photo credit: NASA/Jim Grossmann

Development of spectral analysis math models and software program and spectral analyzer, digital converter interface equipment design

NASA Technical Reports Server (NTRS)

Hayden, W. L.; Robinson, L. H.

1972-01-01

Spectral analyses of angle-modulated communication systems is studied by: (1) performing a literature survey of candidate power spectrum computational techniques, determining the computational requirements, and formulating a mathematical model satisfying these requirements; (2) implementing the model on UNIVAC 1230 digital computer as the Spectral Analysis Program (SAP); and (3) developing the hardware specifications for a data acquisition system which will acquire an input modulating signal for SAP. The SAP computational technique uses extended fast Fourier transform and represents a generalized approach for simple and complex modulating signals.

Environmental Database For Water-Quality Data for the Penobscot River, Maine: Design Documentation and User Guide

USGS Publications Warehouse

Giffen, Sarah E.

2002-01-01

An environmental database was developed to store water-quality data collected during the 1999 U.S. Geological Survey investigation of the occurrence and distribution of dioxins, furans, and PCBs in the riverbed sediment and fish tissue in the Penobscot River in Maine. The database can be used to store a wide range of detailed information and to perform complex queries on the data it contains. The database also could be used to store data from other historical and any future environmental studies conducted on the Penobscot River and surrounding regions.

Biomedical Informatics for Computer-Aided Decision Support Systems: A Survey

PubMed Central

Belle, Ashwin; Kon, Mark A.; Najarian, Kayvan

2013-01-01

The volumes of current patient data as well as their complexity make clinical decision making more challenging than ever for physicians and other care givers. This situation calls for the use of biomedical informatics methods to process data and form recommendations and/or predictions to assist such decision makers. The design, implementation, and use of biomedical informatics systems in the form of computer-aided decision support have become essential and widely used over the last two decades. This paper provides a brief review of such systems, their application protocols and methodologies, and the future challenges and directions they suggest. PMID:23431259

Protein backbone engineering as a strategy to advance foldamers toward the frontier of protein-like tertiary structure.

PubMed

Reinert, Zachary E; Horne, W Seth

2014-11-28

A variety of non-biological structural motifs have been incorporated into the backbone of natural protein sequences. In parallel work, diverse unnatural oligomers of de novo design (termed "foldamers") have been developed that fold in defined ways. In this Perspective article, we survey foundational studies on protein backbone engineering, with a focus on alterations made in the context of complex tertiary folds. We go on to summarize recent work illustrating the potential promise of these methods to provide a general framework for the construction of foldamer mimics of protein tertiary structures.

Structure in the 3D Galaxy Distribution. III. Fourier Transforming the Universe: Phase and Power Spectra

NASA Technical Reports Server (NTRS)

Scargle, Jeffrey D.; Way, M. J.; Gazis, P. G.

2017-01-01

We demonstrate the effectiveness of a relatively straightforward analysis of the complex 3D Fourier transform of galaxy coordinates derived from redshift surveys. Numerical demonstrations of this approach are carried out on a volume-limited sample of the Sloan Digital Sky Survey redshift survey. The direct unbinned transform yields a complex 3D data cube quite similar to that from the Fast Fourier Transform of finely binned galaxy positions. In both cases, deconvolution of the sampling window function yields estimates of the true transform. Simple power spectrum estimates from these transforms are roughly consistent with those using more elaborate methods. The complex Fourier transform characterizes spatial distributional properties beyond the power spectrum in a manner different from (and we argue is more easily interpreted than) the conventional multipoint hierarchy. We identify some threads of modern large-scale inference methodology that will presumably yield detections in new wider and deeper surveys.

A high performance cost-effective digital complex correlator for an X-band polarimetry survey.

PubMed

Bergano, Miguel; Rocha, Armando; Cupido, Luís; Barbosa, Domingos; Villela, Thyrso; Boas, José Vilas; Rocha, Graça; Smoot, George F

2016-01-01

The detailed knowledge of the Milky Way radio emission is important to characterize galactic foregrounds masking extragalactic and cosmological signals. The update of the global sky models describing radio emissions over a very large spectral band requires high sensitivity experiments capable of observing large sky areas with long integration times. Here, we present the design of a new 10 GHz (X-band) polarimeter digital back-end to map the polarization components of the galactic synchrotron radiation field of the Northern Hemisphere sky. The design follows the digital processing trends in radio astronomy and implements a large bandwidth (1 GHz) digital complex cross-correlator to extract the Stokes parameters of the incoming synchrotron radiation field. The hardware constraints cover the implemented VLSI hardware description language code and the preliminary results. The implementation is based on the simultaneous digitized acquisition of the Cartesian components of the two linear receiver polarization channels. The design strategy involves a double data rate acquisition of the ADC interleaved parallel bus, and field programmable gate array device programming at the register transfer mode. The digital core of the back-end is capable of processing 32 Gbps and is built around an Altera field programmable gate array clocked at 250 MHz, 1 GSps analog to digital converters and a clock generator. The control of the field programmable gate array internal signal delays and a convenient use of its phase locked loops provide the timing requirements to achieve the target bandwidths and sensitivity. This solution is convenient for radio astronomy experiments requiring large bandwidth, high functionality, high volume availability and low cost. Of particular interest, this correlator was developed for the Galactic Emission Mapping project and is suitable for large sky area polarization continuum surveys. The solutions may also be adapted to be used at signal processing subsystem levels for large projects like the square kilometer array testbeds.

Factors influencing healthcare provider respondent fatigue answering a globally administered in-app survey.

PubMed

O'Reilly-Shah, Vikas N

2017-01-01

Respondent fatigue, also known as survey fatigue, is a common problem in the collection of survey data. Factors that are known to influence respondent fatigue include survey length, survey topic, question complexity, and open-ended question type. There is a great deal of interest in understanding the drivers of physician survey responsiveness due to the value of information received from these practitioners. With the recent explosion of mobile smartphone technology, it has been possible to obtain survey data from users of mobile applications (apps) on a question-by-question basis. The author obtained basic demographic survey data as well as survey data related to an anesthesiology-specific drug called sugammadex and leveraged nonresponse rates to examine factors that influenced respondent fatigue. Primary data were collected between December 2015 and February 2017. Surveys and in-app analytics were collected from global users of a mobile anesthesia calculator app. Key independent variables were user country, healthcare provider role, rating of importance of the app to personal practice, length of time in practice, and frequency of app use. Key dependent variable was the metric of respondent fatigue. Provider role and World Bank country income level were predictive of the rate of respondent fatigue for this in-app survey. Importance of the app to the provider and length of time in practice were moderately associated with fatigue. Frequency of app use was not associated. This study focused on a survey with a topic closely related to the subject area of the app. Respondent fatigue rates will likely change dramatically if the topic does not align closely. Although apps may serve as powerful platforms for data collection, responses rates to in-app surveys may differ on the basis of important respondent characteristics. Studies should be carefully designed to mitigate fatigue as well as powered with the understanding of the respondent characteristics that may have higher rates of respondent fatigue.

Factors influencing healthcare provider respondent fatigue answering a globally administered in-app survey

PubMed Central

2017-01-01

Background Respondent fatigue, also known as survey fatigue, is a common problem in the collection of survey data. Factors that are known to influence respondent fatigue include survey length, survey topic, question complexity, and open-ended question type. There is a great deal of interest in understanding the drivers of physician survey responsiveness due to the value of information received from these practitioners. With the recent explosion of mobile smartphone technology, it has been possible to obtain survey data from users of mobile applications (apps) on a question-by-question basis. The author obtained basic demographic survey data as well as survey data related to an anesthesiology-specific drug called sugammadex and leveraged nonresponse rates to examine factors that influenced respondent fatigue. Methods Primary data were collected between December 2015 and February 2017. Surveys and in-app analytics were collected from global users of a mobile anesthesia calculator app. Key independent variables were user country, healthcare provider role, rating of importance of the app to personal practice, length of time in practice, and frequency of app use. Key dependent variable was the metric of respondent fatigue. Results Provider role and World Bank country income level were predictive of the rate of respondent fatigue for this in-app survey. Importance of the app to the provider and length of time in practice were moderately associated with fatigue. Frequency of app use was not associated. This study focused on a survey with a topic closely related to the subject area of the app. Respondent fatigue rates will likely change dramatically if the topic does not align closely. Discussion Although apps may serve as powerful platforms for data collection, responses rates to in-app surveys may differ on the basis of important respondent characteristics. Studies should be carefully designed to mitigate fatigue as well as powered with the understanding of the respondent characteristics that may have higher rates of respondent fatigue. PMID:28924502

Terrestrial Laser Scanning and Structure from Motion teaching resources for undergraduate field education courses

NASA Astrophysics Data System (ADS)

Pratt-Sitaula, B. A.; Shervais, K.; Crosby, C. J.; Douglas, B. J.; Niemi, N. A.; Wang, G.; Charlevoix, D. J.

2015-12-01

Fieldwork is an integral part of the geosciences and there is a longstanding tradition of teaching field methods as part of the undergraduate curriculum. As new technology changes the ways in which we scientifically examine the Earth, and as workforce development demands evolve, there is growing interest in introducing these new technologies into field education courses. In collaboration with field education instructors, UNAVCO, the National Science Foundation's geodetic facility, has developed a module of teaching resources to integrate terrestrial lidar scanning into field courses. An NSF facility is well positioned to develop scalable resources that can then be distributed or adapted for broader implementation. The modules can also be accomplished using Structure from Motion methods in place of lidar scanning. Modules goals are for students to be able to: (A) design and conduct a complex TLS survey to address a geologic research question and (B) articulate the societal impetus for answering these research questions and identify why TLS is the appropriate method in some circumstances. The module is comprised of five units: (1) Introduction to survey design, (2) Stratigraphic section analysis, (3) Fault scarp analysis, (4) Geomorphic change detection, (5) Student-led survey design summative assessment. The modules, apart from the Introduction, are independent, thus select modules can be employed in a given field setting. Prototype module materials were developed from the last five years of UNAVCO support of undergraduate field courses. The current versions of the modules were tested in summer 2015 at the Indiana University and University of Michigan field camps. Results show that the majority of students are able to achieve the intended learning goals. Module materials are available on the UNAVCO Education and Community Engagement website.

Land Use Change on Household Farms in the Ecuadorian Amazon: Design and Implementation of an Agent-Based Model.

PubMed

Mena, Carlos F; Walsh, Stephen J; Frizzelle, Brian G; Xiaozheng, Yao; Malanson, George P

2011-01-01

This paper describes the design and implementation of an Agent-Based Model (ABM) used to simulate land use change on household farms in the Northern Ecuadorian Amazon (NEA). The ABM simulates decision-making processes at the household level that is examined through a longitudinal, socio-economic and demographic survey that was conducted in 1990 and 1999. Geographic Information Systems (GIS) are used to establish spatial relationships between farms and their environment, while classified Landsat Thematic Mapper (TM) imagery is used to set initial land use/land cover conditions for the spatial simulation, assess from-to land use/land cover change patterns, and describe trajectories of land use change at the farm and landscape levels. Results from prior studies in the NEA provide insights into the key social and ecological variables, describe human behavioral functions, and examine population-environment interactions that are linked to deforestation and agricultural extensification, population migration, and demographic change. Within the architecture of the model, agents are classified as active or passive. The model comprises four modules, i.e., initialization, demography, agriculture, and migration that operate individually, but are linked through key household processes. The main outputs of the model include a spatially-explicit representation of the land use/land cover on survey and non-survey farms and at the landscape level for each annual time-step, as well as simulated socio-economic and demographic characteristics of households and communities. The work describes the design and implementation of the model and how population-environment interactions can be addressed in a frontier setting. The paper contributes to land change science by examining important pattern-process relations, advocating a spatial modeling approach that is capable of synthesizing fundamental relationships at the farm level, and links people and environment in complex ways.

77 FR 71600 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-03

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding... from emergency room to inpatient care). Having a rigorous, well-designed emergency department survey... this solicitation, please reply via email to CMS ED_Survey@cms.hhs.gov or by postal mail at Centers for...

Designing occupancy studies when false-positive detections occur

USGS Publications Warehouse

Clement, Matthew

2016-01-01

1.Recently, estimators have been developed to estimate occupancy probabilities when false-positive detections occur during presence-absence surveys. Some of these estimators combine different types of survey data to improve estimates of occupancy. With these estimators, there is a tradeoff between the number of sample units surveyed, and the number and type of surveys at each sample unit. Guidance on efficient design of studies when false positives occur is unavailable. 2.For a range of scenarios, I identified survey designs that minimized the mean square error of the estimate of occupancy. I considered an approach that uses one survey method and two observation states and an approach that uses two survey methods. For each approach, I used numerical methods to identify optimal survey designs when model assumptions were met and parameter values were correctly anticipated, when parameter values were not correctly anticipated, and when the assumption of no unmodelled detection heterogeneity was violated. 3.Under the approach with two observation states, false positive detections increased the number of recommended surveys, relative to standard occupancy models. If parameter values could not be anticipated, pessimism about detection probabilities avoided poor designs. Detection heterogeneity could require more or fewer repeat surveys, depending on parameter values. If model assumptions were met, the approach with two survey methods was inefficient. However, with poor anticipation of parameter values, with detection heterogeneity, or with removal sampling schemes, combining two survey methods could improve estimates of occupancy. 4.Ignoring false positives can yield biased parameter estimates, yet false positives greatly complicate the design of occupancy studies. Specific guidance for major types of false-positive occupancy models, and for two assumption violations common in field data, can conserve survey resources. This guidance can be used to design efficient monitoring programs and studies of species occurrence, species distribution, or habitat selection, when false positives occur during surveys.

Deep Generative Models of Galaxy Images for the Calibration of the Next Generation of Weak Lensing Surveys

NASA Astrophysics Data System (ADS)

Lanusse, Francois; Ravanbakhsh, Siamak; Mandelbaum, Rachel; Schneider, Jeff; Poczos, Barnabas

2017-01-01

Weak gravitational lensing has long been identified as one of the most powerful probes to investigate the nature of dark energy. As such, weak lensing is at the heart of the next generation of cosmological surveys such as LSST, Euclid or WFIRST.One particularly crititcal source of systematic errors in these surveys comes from the shape measurement algorithms tasked with estimating galaxy shapes. GREAT3, the last community challenge to assess the quality of state-of-the-art shape measurement algorithms has in particular demonstrated that all current methods are biased to various degrees and, more importantly, that these biases depend on the details of the galaxy morphologies. These biases can be measured and calibrated by generating mock observations where a known lensing signal has been introduced and comparing the resulting measurements to the ground-truth. Producing these mock observations however requires input galaxy images of higher resolution and S/N than the simulated survey, which typically implies acquiring extremely expensive space-based observations.The goal of this work is to train a deep generative model on already available Hubble Space Telescope data which can then be used to sample new galaxy images conditioned on parameters such as magnitude, size or redshift and exhibiting complex morphologies. Such model can allow us to inexpensively produce large set of realistic realistic images for calibration purposes.We implement a conditional generative model based on state-of-the-art deep learning methods and fit it to deep galaxy images from the COSMOS survey. The quality of the model is assessed by computing an extensive set of galaxy morphology statistics on the generated images. Beyond simple second moment statistics such as size and ellipticity, we apply more complex statistics specifically designed to be sensitive to disturbed galaxy morphologies. We find excellent agreement between the morphologies of real and model generated galaxies.Our results suggest that such deep generative models represent a reliable alternative to the acquisition of expensive high quality observations for generating the calibration data needed by the next generation of weak lensing surveys.

Evaluating the effectiveness of the MASW technique in a geologically complex terrain

NASA Astrophysics Data System (ADS)

Anukwu, G. C.; Khalil, A. E.; Abdullah, K. B.

2018-04-01

MASW surveys carried at a number of sites in Pulau Pinang, Malaysia, showed complicated dispersion curves which consequently made the inversion into soil shear velocity model ambiguous. This research work details effort to define the source of these complicated dispersion curves. As a starting point, the complexity of the phase velocity spectrum is assumed to be due to either the surveying parameters or the elastic properties of the soil structures. For the former, the surveying was carried out using different parameters. The complexities were persistent for the different surveying parameters, an indication that the elastic properties of the soil structure could be the reason. In order to exploit this assumption, a synthetic modelling approach was adopted using information from borehole, literature and geologically plausible models. Results suggest that the presence of irregular variation in the stiffness of the soil layers, high stiffness contrast and relatively shallow bedrock, results in a quite complex f-v spectrum, especially at frequencies lower than 20Hz, making it difficult to accurately extract the dispersion curve below this frequency. As such, for MASW technique, especially in complex geological situations as demonstrated, great care should be taken during the data processing and inversion to obtain a model that accurately depicts the subsurface.

Effect of questionnaire length, personalisation and reminder type on response rate to a complex postal survey: randomised controlled trial

PubMed Central

2011-01-01

Background Minimising participant non-response in postal surveys helps to maximise the generalisability of the inferences made from the data collected. The aim of this study was to examine the effect of questionnaire length, personalisation and reminder type on postal survey response rate and quality and to compare the cost-effectiveness of the alternative survey strategies. Methods In a pilot study for a population study of travel behaviour, physical activity and the environment, 1000 participants sampled from the UK edited electoral register were randomly allocated using a 2 × 2 factorial design to receive one of four survey packs: a personally addressed long (24 page) questionnaire pack, a personally addressed short (15 page) questionnaire pack, a non-personally addressed long questionnaire pack or a non-personally addressed short questionnaire pack. Those who did not return a questionnaire were stratified by initial randomisation group and further randomised to receive either a full reminder pack or a reminder postcard. The effects of the survey design factors on response were examined using multivariate logistic regression. Results An overall response rate of 17% was achieved. Participants who received the short version of the questionnaire were more likely to respond (OR = 1.48, 95% CI 1.06 to 2.07). In those participants who received a reminder, personalisation of the survey pack and reminder also increased the odds of response (OR = 1.44, 95% CI 1.01 to 1.95). Item non-response was relatively low, but was significantly higher in the long questionnaire than the short (9.8% vs 5.8%; p = .04). The cost per additional usable questionnaire returned of issuing the reminder packs was £23.1 compared with £11.3 for the reminder postcards. Conclusions In contrast to some previous studies of shorter questionnaires, this trial found that shortening a relatively lengthy questionnaire significantly increased the response. Researchers should consider the trade off between the value of additional questions and a larger sample. If low response rates are expected, personalisation may be an important strategy to apply. Sending a full reminder pack to non-respondents appears a worthwhile, albeit more costly, strategy. PMID:21548947

78 FR 77680 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... an outside vendor, the Federal Reserve would design the survey and draft the survey questions in... the wording of survey questions, and complementing a quantitative survey in a mixed method research design. The number of respondents to any given qualitative stakeholder survey would vary depending on the...

Variation in the Implementation of California's Full Service Partnerships for Persons with Serious Mental Illness

PubMed Central

Gilmer, Todd P; Katz, Marian L; Stefancic, Ana; Palinkas, Lawrence A

2013-01-01

Objective. This study examined variation in the implementation of California's Full Service Partnerships (FSPs), which are supported housing programs that do “whatever it takes” to improve outcomes among persons with serious mental illness who are homeless or at risk of homelessness. Data Sources/Setting. Ninety-three FSPs in California. Study Design. A mixed methods approach was selected to develop a better understanding of the complexity of the FSP programs. The design structure was a combined explanatory and exploratory sequential design (qual→QUAN→qual) where a qualitative focus group was used to develop a quantitative survey that was followed by qualitative site visits. The survey was used to describe the breadth of variation based on fidelity to the Housing First model, while the site visits were used to provide a depth of information on high- versus low-fidelity programs. Principal Findings. We found substantial variation in implementation among FSPs. Fidelity was particularly low along domains related with housing and service philosophy, indicating that many FSPs implemented a rich array of services but applied housing readiness requirements and did not adhere to consumer choice in housing. Conclusions. There remains room for improvement in the recovery-orientation of FSPs. Fortunately, we have identified several processes by which program managers and counties can increase the fidelity of their programs. PMID:24138021

A Survey of Collectives

NASA Technical Reports Server (NTRS)

Tumer, Kagan; Wolpert, David

2004-01-01

Due to the increasing sophistication and miniaturization of computational components, complex, distributed systems of interacting agents are becoming ubiquitous. Such systems, where each agent aims to optimize its own performance, but where there is a well-defined set of system-level performance criteria, are called collectives. The fundamental problem in analyzing/designing such systems is in determining how the combined actions of self-interested agents leads to 'coordinated' behavior on a iarge scale. Examples of artificial systems which exhibit such behavior include packet routing across a data network, control of an array of communication satellites, coordination of multiple deployables, and dynamic job scheduling across a distributed computer grid. Examples of natural systems include ecosystems, economies, and the organelles within a living cell. No current scientific discipline provides a thorough understanding of the relation between the structure of collectives and how well they meet their overall performance criteria. Although still very young, research on collectives has resulted in successes both in understanding and designing such systems. It is eqected that as it matures and draws upon other disciplines related to collectives, this field will greatly expand the range of computationally addressable tasks. Moreover, in addition to drawing on them, such a fully developed field of collective intelligence may provide insight into already established scientific fields, such as mechanism design, economics, game theory, and population biology. This chapter provides a survey to the emerging science of collectives.

Bioprosthetic heart valve heterograft biomaterials: structure, mechanical behavior and computational simulation.

PubMed

Sacks, Michael S; Mirnajafi, Ali; Sun, Wei; Schmidt, Paul

2006-11-01

The present review surveys significant developments in the biomechanical characterization and computational simulation of biologically derived chemically cross-linked soft tissues, or 'heterograft' biomaterials, used in replacement bioprosthetic heart valve (BHV). A survey of mechanical characterization techniques, relevant mechanical properties and computational simulation approaches is presented for both the source tissues and cross-linked biomaterials. Since durability remains the critical problem with current bioprostheses, changes with the mechanical behavior with fatigue are also presented. Moreover, given the complex nature of the mechanical properties of heterograft biomaterials it is not surprising that most constitutive (stress-strain) models, historically used to characterize their behavior, were oversimplified. Simulations of BHV function utilizing these models have inevitably been inaccurate. Thus, more recent finite element simulations utilizing nonlinear constitutive models, which achieve greater model fidelity, are reviewed. An important conclusion of this review is the need for accurate constitutive models, rigorously validated with appropriate experimental data, in order that the design benefits of computational models can be realized. Finally, for at least the coming 20 years, BHVs fabricated from heterograft biomaterials will continue to be extensively used, and will probably remain as the dominant valve design. We should thus recognize that rational, scientifically based approaches to BHV biomaterial development and design can lead to significantly improved BHV, over the coming decades, which can potentially impact millions of patients worldwide with heart valve disease.

23 CFR Appendix A to Part 1340 - Sample Design

Code of Federal Regulations, 2010 CFR

2010-04-01

... OBSERVATIONAL SURVEYS OF SEAT BELT USE Pt. 1340, App. A Appendix A to Part 1340—Sample Design Following is a description of a sample design that meets the final survey guidelines and, based upon NHTSA's experience in.... This information is intended only as an example of a complying survey design and to provide guidance...

76 FR 77538 - Family and Youth Services Bureau; Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

...) evaluation design, which will involve baseline surveys and two follow-up surveys. This will allow short- and... descriptive analysis of how States designed and implemented PREP programs. The study will use multiple methods... ``Design Survey'', will focus on how states designed programs, and the second round of interviews, known as...

Surveying hospital network structure in New York State: how are they structured?

PubMed

Nauenberg, E; Brewer, C S

2000-01-01

We determine the most common network structures in New York state. The taxonomy employed uses three structural dimensions: integration, complexity, and risk-sharing between organizations. Based on a survey conducted in 1996, the most common type of network (26.4 percent) had medium levels of integration, medium or high levels of complexity, and some risk-sharing. Also common were networks with low levels of integration, low levels of complexity, and no risk-sharing (22.1 percent).

Novice Interpretations of Visual Representations of Geosciences Data

NASA Astrophysics Data System (ADS)

Burkemper, L. K.; Arthurs, L.

2013-12-01

Past cognition research of individual's perception and comprehension of bar and line graphs are substantive enough that they have resulted in the generation of graph design principles and graph comprehension theories; however, gaps remain in our understanding of how people process visual representations of data, especially of geologic and atmospheric data. This pilot project serves to build on others' prior research and begin filling the existing gaps. The primary objectives of this pilot project include: (i) design a novel data collection protocol based on a combination of paper-based surveys, think-aloud interviews, and eye-tracking tasks to investigate student data handling skills of simple to complex visual representations of geologic and atmospheric data, (ii) demonstrate that the protocol yields results that shed light on student data handling skills, and (iii) generate preliminary findings upon which tentative but perhaps helpful recommendations on how to more effectively present these data to the non-scientist community and teach essential data handling skills. An effective protocol for the combined use of paper-based surveys, think-aloud interviews, and computer-based eye-tracking tasks for investigating cognitive processes involved in perceiving, comprehending, and interpreting visual representations of geologic and atmospheric data is instrumental to future research in this area. The outcomes of this pilot study provide the foundation upon which future more in depth and scaled up investigations can build. Furthermore, findings of this pilot project are sufficient for making, at least, tentative recommendations that can help inform (i) the design of physical attributes of visual representations of data, especially more complex representations, that may aid in improving students' data handling skills and (ii) instructional approaches that have the potential to aid students in more effectively handling visual representations of geologic and atmospheric data that they might encounter in a course, television news, newspapers and magazines, and websites. Such recommendations would also be the potential subject of future investigations and have the potential to impact the design features when data is presented to the public and instructional strategies not only in geoscience courses but also other science, technology, engineering, and mathematics (STEM) courses.

The incorporation of gender perspective into Spanish health surveys.

PubMed

Rohlfs, Izabella; Borrell, Carme; Artazcoz, Lucia; Escribà-Agüir, Vicenta

2007-12-01

Most studies into social determinants of health conducted in Spain based on data from health surveys have focused on social class inequalities. This paper aims to review the progressive incorporation of gender perspective and sex differences into health surveys in Spain, and to suggest design, data collection and analytical proposals as well as to make policy proposals. Changes introduced into health surveys in Spain since 1995 to incorporate gender perspective are examined, and proposals for the future are made, which would permit the analysis of differences in health between women and men as a result of biology or because of gender inequalities. The introduction of gender perspective in health surveys requires the incorporation of questions related to family setting and reproductive work, workplace and society in general to detect gender differences and inequalities (for example, domestic work, intimate partner violence, discrimination, contract type or working hours). Health indicators reflecting differential morbidity and taking into account the different life cycle stages must also be incorporated. Analyses ought to be disaggregated by sex and interpretation of results must consider the complex theoretical frameworks explaining the differences in health between men and women based on sex differences and those related to gender. Analysis of survey data ought to consider the impact of social, political and cultural constructs of each society. Any significant modification in procedures for collection of data relevant to the study of gender will require systematic coordination between institutions generating the data and researchers who are trained in and sensitive to the topic.

Understanding GPU Power. A Survey of Profiling, Modeling, and Simulation Methods

DOE PAGES

Bridges, Robert A.; Imam, Neena; Mintz, Tiffany M.

2016-09-01

Modern graphics processing units (GPUs) have complex architectures that admit exceptional performance and energy efficiency for high throughput applications.Though GPUs consume large amounts of power, their use for high throughput applications facilitate state-of-the-art energy efficiency and performance. Consequently, continued development relies on understanding their power consumption. Our work is a survey of GPU power modeling and profiling methods with increased detail on noteworthy efforts. Moreover, as direct measurement of GPU power is necessary for model evaluation and parameter initiation, internal and external power sensors are discussed. Hardware counters, which are low-level tallies of hardware events, share strong correlation to powermore » use and performance. Statistical correlation between power and performance counters has yielded worthwhile GPU power models, yet the complexity inherent to GPU architectures presents new hurdles for power modeling. Developments and challenges of counter-based GPU power modeling is discussed. Often building on the counter-based models, research efforts for GPU power simulation, which make power predictions from input code and hardware knowledge, provide opportunities for optimization in programming or architectural design. Noteworthy strides in power simulations for GPUs are included along with their performance or functional simulator counterparts when appropriate. Lastly, possible directions for future research are discussed.« less

Understanding GPU Power. A Survey of Profiling, Modeling, and Simulation Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bridges, Robert A.; Imam, Neena; Mintz, Tiffany M.

Modern graphics processing units (GPUs) have complex architectures that admit exceptional performance and energy efficiency for high throughput applications.Though GPUs consume large amounts of power, their use for high throughput applications facilitate state-of-the-art energy efficiency and performance. Consequently, continued development relies on understanding their power consumption. Our work is a survey of GPU power modeling and profiling methods with increased detail on noteworthy efforts. Moreover, as direct measurement of GPU power is necessary for model evaluation and parameter initiation, internal and external power sensors are discussed. Hardware counters, which are low-level tallies of hardware events, share strong correlation to powermore » use and performance. Statistical correlation between power and performance counters has yielded worthwhile GPU power models, yet the complexity inherent to GPU architectures presents new hurdles for power modeling. Developments and challenges of counter-based GPU power modeling is discussed. Often building on the counter-based models, research efforts for GPU power simulation, which make power predictions from input code and hardware knowledge, provide opportunities for optimization in programming or architectural design. Noteworthy strides in power simulations for GPUs are included along with their performance or functional simulator counterparts when appropriate. Lastly, possible directions for future research are discussed.« less

Characterization of measurement errors using structure-from-motion and photogrammetry to measure marine habitat structural complexity.

PubMed

Bryson, Mitch; Ferrari, Renata; Figueira, Will; Pizarro, Oscar; Madin, Josh; Williams, Stefan; Byrne, Maria

2017-08-01

Habitat structural complexity is one of the most important factors in determining the makeup of biological communities. Recent advances in structure-from-motion and photogrammetry have resulted in a proliferation of 3D digital representations of habitats from which structural complexity can be measured. Little attention has been paid to quantifying the measurement errors associated with these techniques, including the variability of results under different surveying and environmental conditions. Such errors have the potential to confound studies that compare habitat complexity over space and time. This study evaluated the accuracy, precision, and bias in measurements of marine habitat structural complexity derived from structure-from-motion and photogrammetric measurements using repeated surveys of artificial reefs (with known structure) as well as natural coral reefs. We quantified measurement errors as a function of survey image coverage, actual surface rugosity, and the morphological community composition of the habitat-forming organisms (reef corals). Our results indicated that measurements could be biased by up to 7.5% of the total observed ranges of structural complexity based on the environmental conditions present during any particular survey. Positive relationships were found between measurement errors and actual complexity, and the strength of these relationships was increased when coral morphology and abundance were also used as predictors. The numerous advantages of structure-from-motion and photogrammetry techniques for quantifying and investigating marine habitats will mean that they are likely to replace traditional measurement techniques (e.g., chain-and-tape). To this end, our results have important implications for data collection and the interpretation of measurements when examining changes in habitat complexity using structure-from-motion and photogrammetry.

A Multifaceted Mathematical Approach for Complex Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexander, F.; Anitescu, M.; Bell, J.

2012-03-07

Applied mathematics has an important role to play in developing the tools needed for the analysis, simulation, and optimization of complex problems. These efforts require the development of the mathematical foundations for scientific discovery, engineering design, and risk analysis based on a sound integrated approach for the understanding of complex systems. However, maximizing the impact of applied mathematics on these challenges requires a novel perspective on approaching the mathematical enterprise. Previous reports that have surveyed the DOE's research needs in applied mathematics have played a key role in defining research directions with the community. Although these reports have had significantmore » impact, accurately assessing current research needs requires an evaluation of today's challenges against the backdrop of recent advances in applied mathematics and computing. To address these needs, the DOE Applied Mathematics Program sponsored a Workshop for Mathematics for the Analysis, Simulation and Optimization of Complex Systems on September 13-14, 2011. The workshop had approximately 50 participants from both the national labs and academia. The goal of the workshop was to identify new research areas in applied mathematics that will complement and enhance the existing DOE ASCR Applied Mathematics Program efforts that are needed to address problems associated with complex systems. This report describes recommendations from the workshop and subsequent analysis of the workshop findings by the organizing committee.« less

Combining Propensity Score Methods and Complex Survey Data to Estimate Population Treatment Effects

ERIC Educational Resources Information Center

Stuart, Elizabeth A.; Dong, Nianbo; Lenis, David

2016-01-01

Complex surveys are often used to estimate causal effects regarding the effects of interventions or exposures of interest. Propensity scores (Rosenbaum & Rubin, 1983) have emerged as one popular and effective tool for causal inference in non-experimental studies, as they can help ensure that groups being compared are similar with respect to a…

23 CFR Appendix C to Part 1240 - Certification (Calendar Year 1998 Survey Based on Survey Approved Under 23 U.S.C. 153)

Code of Federal Regulations, 2012 CFR

2012-04-01

... belt use rate reported above is based on a survey whose design was approved by NHTSA, in writing, on or... survey design has remained unchanged since the survey was approved (except to the extent that the... 23 Highways 1 2012-04-01 2012-04-01 false Certification (Calendar Year 1998 Survey Based on Survey...

23 CFR Appendix C to Part 1240 - Certification (Calendar Year 1998 Survey Based on Survey Approved Under 23 U.S.C. 153)

Code of Federal Regulations, 2010 CFR

2010-04-01

... belt use rate reported above is based on a survey whose design was approved by NHTSA, in writing, on or... survey design has remained unchanged since the survey was approved (except to the extent that the... 23 Highways 1 2010-04-01 2010-04-01 false Certification (Calendar Year 1998 Survey Based on Survey...

23 CFR Appendix C to Part 1240 - Certification (Calendar Year 1998 Survey Based on Survey Approved Under 23 U.S.C. 153)

Code of Federal Regulations, 2013 CFR

2013-04-01

... belt use rate reported above is based on a survey whose design was approved by NHTSA, in writing, on or... survey design has remained unchanged since the survey was approved (except to the extent that the... 23 Highways 1 2013-04-01 2013-04-01 false Certification (Calendar Year 1998 Survey Based on Survey...

23 CFR Appendix C to Part 1240 - Certification (Calendar Year 1998 Survey Based on Survey Approved Under 23 U.S.C. 153)

Code of Federal Regulations, 2011 CFR

2011-04-01

... belt use rate reported above is based on a survey whose design was approved by NHTSA, in writing, on or... survey design has remained unchanged since the survey was approved (except to the extent that the... 23 Highways 1 2011-04-01 2011-04-01 false Certification (Calendar Year 1998 Survey Based on Survey...

23 CFR Appendix C to Part 1240 - Certification (Calendar Year 1998 Survey Based on Survey Approved Under 23 U.S.C. 153)

Code of Federal Regulations, 2014 CFR

2014-04-01

... belt use rate reported above is based on a survey whose design was approved by NHTSA, in writing, on or... survey design has remained unchanged since the survey was approved (except to the extent that the... 23 Highways 1 2014-04-01 2014-04-01 false Certification (Calendar Year 1998 Survey Based on Survey...

Sample and design considerations in post-disaster mental health needs assessment tracking surveys

PubMed Central

Kessler, Ronald C.; Keane, Terence M.; Ursano, Robert J.; Mokdad, Ali; Zaslavsky, Alan M.

2009-01-01

Although needs assessment surveys are carried out after many large natural and man-made disasters, synthesis of findings across these surveys and disaster situations about patterns and correlates of need is hampered by inconsistencies in study designs and measures. Recognizing this problem, the US Substance Abuse and Mental Health Services Administration (SAMHSA) assembled a task force in 2004 to develop a model study design and interview schedule for use in post-disaster needs assessment surveys. The US National Institute of Mental Health subsequently approved a plan to establish a center to implement post-disaster mental health needs assessment surveys in the future using an integrated series of measures and designs of the sort proposed by the SAMHSA task force. A wide range of measurement, design, and analysis issues will arise in developing this center. Given that the least widely discussed of these issues concerns study design, the current report focuses on the most important sampling and design issues proposed for this center based on our experiences with the SAMHSA task force, subsequent Katrina surveys, and earlier work in other disaster situations. PMID:19035440

Are Comparisons of Patient Experiences Across Hospitals Fair? A Study in Veterans Health Administration Hospitals

PubMed Central

Cleary, Paul D.; Meterko, Mark; Wright, Steven M.; Zaslavsky, Alan M.

2015-01-01

Background Surveys are increasingly used to assess patient experiences with health care. Comparisons of hospital scores based on patient experience surveys should be adjusted for patient characteristics that might affect survey results. Such characteristics are commonly drawn from patient surveys that collect little, if any, clinical information. Consequently some hospitals, especially those treating particularly complex patients, have been concerned that standard adjustment methods do not adequately reflect the challenges of treating their patients. Objectives To compare scores for different types of hospitals after making adjustments using only survey-reported patient characteristics and using more complete clinical and hospital information. Research Design We used clinical and survey data from a national sample of 1858 veterans hospitalized for an initial acute myocardial infarction (AMI) in a Department of Veterans Affairs (VA) medical center during fiscal years 2003 and 2004. We used VA administrative data to characterize hospitals. The survey asked patients about their experiences with hospital care. The clinical data included 14 measures abstracted from medical records that are predictive of survival after an AMI. Results Comparisons of scores across hospitals adjusted only for patient-reported health status and sociodemographic characteristics were similar to those that also adjusted for patient clinical characteristics; the Spearman rank-order correlations between the 2 sets of adjusted scores were >0.97 across 9 dimensions of inpatient experience. Conclusions This study did not support concerns that measures of patient care experiences are unfair because commonly used models do not adjust adequately for potentially confounding patient clinical characteristics. PMID:24926709

Food insecurity is associated with HIV, sexually transmitted infections and drug use among men in the United States

PubMed Central

PALAR, Kartika; LARAIA, Barbara; TSAI, Alexander C.; JOHNSON, Mallory; WEISER, Sheri D.

2016-01-01

Objective To examine the population-level association between food insecurity, HIV risk factors, and HIV serostatus among men, the group representing the majority of HIV diagnoses in the United States (US). Design Cross-sectional secondary data analysis using the National Health and Nutrition Examination Survey (NHANES) 1999-2012, a nationally representative survey of the civilian non-institutionalized US population. Methods Logistic regression with design weights and complex survey commands was used to estimate nationally-representative associations between food insecurity and HIV serostatus (primary outcome), herpes simplex virus 2 (HSV-2), self-reported STIs, and past-year illicit drug use among men, adjusting for potential confounders. Food security was measured using the 18-item Household Food Security Survey. Results We analyzed data for 9150 men representing 61 million individuals in the US. Unadjusted HIV prevalence was 1.5% among food insecure men, compared to 0.4% among food secure men (p<0.001). In adjusted models, food insecure men had over 2 times higher odds of HIV seropositivity compared to food secure men (adjusted odds ratio (AOR)=2.10; 95% CI 1.01 - 4.37; p<0.05). Food insecurity was associated with higher odds of HSV-2 seropositivity (AOR=1.28; 95% CI 1.04 - 1.57; p<0.05), self-reported STIs (AOR=1.54; 95% CI 1.08 - 2.20; p<0.05), and illicit drug use (AOR=1.57; 95% CI 1.14 - 2.15; p<0.01). Results were robust to sensitivity analyses restricted to lower incomes. Conclusions Food insecurity is associated with prevalent HIV, STIs and illicit drug use among men in the US. Further research is needed to establish whether and through what mechanisms improved food security may help prevent new HIV infections. PMID:26990632

Curriculum Design of Computer Graphics Programs: A Survey of Art/Design Programs at the University Level.

ERIC Educational Resources Information Center

McKee, Richard Lee

This master's thesis reports the results of a survey submitted to over 30 colleges and universities that currently offer computer graphics courses or are in the planning stage of curriculum design. Intended to provide a profile of the computer graphics programs and insight into the process of curriculum design, the survey gathered data on program…

Factors predicting change in hospital safety climate and capability in a multi-site patient safety collaborative: a longitudinal survey study.

PubMed

Benn, Jonathan; Burnett, Susan; Parand, Anam; Pinto, Anna; Vincent, Charles

2012-07-01

The study had two specific objectives: (1) To analyse change in a survey measure of organisational patient safety climate and capability (SCC) resulting from participation in the UK Safer Patients Initiative and (2) To investigate the role of a range of programme and contextual factors in predicting change in SCC scores. Single group longitudinal design with repeated measurement at 12-month follow-up. Multiple service areas within NHS hospital sites across England, Wales, Scotland and Northern Ireland. Stratified sample of 284 respondents representing programme teams at 19 hospital sites. A complex intervention comprising a multi-component quality improvement collaborative focused upon patient safety and designed to impact upon hospital leadership, communication, organisation and safety climate. A survey including a 31-item SCC scale was administered at two time-points. Modest but significant positive movement in SCC score was observed between the study time-points. Individual programme responsibility, availability of early adopters, multi-professional collaboration and extent of process measurement were significant predictors of change in SCC. Hospital type and size, along with a range of programme preconditions, were not found to be significant. A range of social, cultural and organisational factors may be sensitive to this type of intervention but the measurable effect is small. Supporting critical local programme implementation factors may be an effective strategy in achieving development in organisational patient SCC, regardless of contextual factors and organisational preconditions.

The LSST: A System of Systems

NASA Astrophysics Data System (ADS)

Claver, Chuck F.; Debois-Felsmann, G. P.; Delgado, F.; Hascall, P.; Marshall, S.; Nordby, M.; Schumacher, G.; Sebag, J.; LSST Collaboration

2011-01-01

The Large Synoptic Survey Telescope (LSST) is a complete observing system that acquires and archives images, processes and analyzes them, and publishes reduced images and catalogs of sources and objects. The LSST will operate over a ten year period producing a survey of 20,000 square degrees over the entire [Southern] sky in 6 filters (ugrizy) with each field having been visited several hundred times enabling a wide spectrum of science from fast transients to exploration of dark matter and dark energy. The LSST itself is a complex system of systems consisting of the 8.4m 3-mirror telescope, a 3.2 billion pixel camera, and a peta-scale data management system. The LSST project uses a Model Based Systems Engineering (MBSE) methodology to ensure an integrated approach to system design and rigorous definition of system interfaces and specifications. The MBSE methodology is applied through modeling of the LSST's systems with the System Modeling Language (SysML). The SysML modeling recursively establishes the threefold relationship between requirements, logical & physical functional decomposition and definition, and system and component behavior at successively deeper level of abstraction and detail. The LSST modeling includes the analysis and documenting the flow of command and control information and data between the suite of systems in the LSST observatory that are needed to carry out the activities of the survey. The MBSE approach is applied throughout all stages of the project from design, to validation and verification, though to commissioning.

76 FR 62072 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

... Evaluation--Design Survey. OMB No.: New collection. Description: The Family and Youth Services Bureau. (HHS... Organizations. Annual Burden Estimates Design survey Number of Average burden Instrument Annual number responses... Total for Design 92 Survey Additional Information: Copies of the proposed collection may be obtained by...

Advances in Robotic, Human, and Autonomous Systems for Missions of Space Exploration

NASA Technical Reports Server (NTRS)

Gross, Anthony R.; Briggs, Geoffrey A.; Glass, Brian J.; Pedersen, Liam; Kortenkamp, David M.; Wettergreen, David S.; Nourbakhsh, I.; Clancy, Daniel J.; Zornetzer, Steven (Technical Monitor)

2002-01-01

Space exploration missions are evolving toward more complex architectures involving more capable robotic systems, new levels of human and robotic interaction, and increasingly autonomous systems. How this evolving mix of advanced capabilities will be utilized in the design of new missions is a subject of much current interest. Cost and risk constraints also play a key role in the development of new missions, resulting in a complex interplay of a broad range of factors in the mission development and planning of new missions. This paper will discuss how human, robotic, and autonomous systems could be used in advanced space exploration missions. In particular, a recently completed survey of the state of the art and the potential future of robotic systems, as well as new experiments utilizing human and robotic approaches will be described. Finally, there will be a discussion of how best to utilize these various approaches for meeting space exploration goals.

Seismic-reflection studies, offshore Santa Maria Province, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bird, K.J.; Childs, J.R.; Taylor, D.J.

1991-02-01

Well data and seismic-reflection records are being analyzed to provide a subsurface geologic framework for the US Geological Survey's Santa Maria Province project. This project, jointly sponsored by the Evolution of Sedimentary Basins and Onshore Oil and Gas Investigations Programs, in a basin-evolution and petroleum geology study focusing on the geologically complex and tectonically active south-central California margin. The area embraces several basins and basin fragments including the onshore Santa Maria, offshore Santa Maria, Pismo, Huasna, Sur, Santa Lucia, and western Santa Barbara-Ventura. These basins have many similarities, including generally synchronous formation at about the end of the Oligocene, developmentmore » on a complex assemblage of Mesozoic tectonostratigraphic terranes, and basin fill consisting of Neogene clastic marine and nonmarine deposits, minor volcanic rocks, and organic-rich biogenous deposits of the Monterey Formation. Despite these similarities, basin origins are controversial and paleogeographies uncertain. In 1990, the US Geological Survey collected approximately 130 line-mi of multichannel seismic reflection data in seven profiles off-shore California from Morro Bay south to the western Santa Barbara Channel. These are the first US Geological Survey seismic data collected in this area since the early 1980s exploratory drilling began in the offshore Santa Maria basin. Profiles were generally oriented perpendicular to structural grain and located to intersect as many well-sites and pre-existing seismic profiles as possible. Profile orientation and spacing were designed to provide the offshore extensions of onshore well-correlation profiles currently under construction. With synthetic seismograms the authors are integrating the stratigraphy of the wells with these seismic-reflection records.« less

Social Media Use Among Physicians and Trainees: Results of a National Medical Oncology Physician Survey.

PubMed

Adilman, Rachel; Rajmohan, Yanchini; Brooks, Edward; Urgoiti, Gloria Roldan; Chung, Caroline; Hammad, Nazik; Trinkaus, Martina; Naseem, Madiha; Simmons, Christine; Adilman, Rachel; Rajmohan, Yanchini; Brooks, Edward; Roldan Urgoiti, Gloria; Chung, Caroline; Hammad, Nazik; Trinkaus, Martina; Naseem, Madiha; Simmons, Christine

2016-01-01

Cancer management requires coordinated care from many health care providers, and its complexity requires physicians be up to date on current research. Web-based social media support physician collaboration and information sharing, but the extent to which physicians use social media for these purposes remains unknown. The complex field of oncology will benefit from increased use of online social media to enhance physician communication, education, and mentorship. To facilitate this, patterns of social media use among oncologists must be better understood. A nine-item survey investigating physician social media use, designed using online survey software, was distributed via e-mail to 680 oncology physicians and physicians in training in Canada. Responses were analyzed using descriptive statistics. A total of 207 responses (30%) were received; 72% of respondents reported using social media. Social media use was highest, at 93%, in respondents age 25 to 34 years and lowest, at 39%, in those age 45 to 54 years. This demonstrates a significant gap in social media use between younger users and mid- to late-career users. The main barrier to use was lack of free time. The identified gap in social media use between age cohorts may have negative implications for communication in oncology. Despite advancements in social media and efforts to integrate social media into medical education, most oncologists and trainees use social media rarely, which, along with the age-related gap in use, may have consequences for collaboration and education in oncology. Investigations to further understand barriers to social media use should be undertaken to enhance physician collaboration and knowledge sharing through social media.

Self-criticism and social phobia in the US national comorbidity survey.

PubMed

Cox, Brian J; Fleet, Claire; Stein, Murray B

2004-10-15

This study sought to extend findings from a preliminary clinical investigation [J. Affect. Disord. 57 (2000) 223] by examining relations between the personality dimension of self-criticism and diagnostic prevalence of social phobia in a large nationally representative sample. Participants were from the national comorbidity survey Part II [n=5877; Arch. Gen. Psychiatry 51 (1994) 8]. Psychiatric diagnoses were made using a modified version of the composite international psychiatric interview. Personality dimensions and distress were assessed using brief self-report measures with strong psychometric properties. Self-criticism was elevated in NCS respondents with a diagnosis of social phobia, even in cases of only past history of social phobia (i.e. >1 year ago), compared to individuals with no psychiatric disorder. The highest levels of self-criticism were reported by people with the complex subtype of social phobia, both with and without comorbid major depression. These levels were significantly greater compared to those observed in another anxiety disorder (panic disorder), the pure speaking subtype of social phobia, and cases of major depression alone. In a regression analysis that controlled for current emotional distress, the broad personality trait of neuroticism, and lifetime histories of mood, anxiety, and substance use disorders, self-criticism remained significantly associated with lifetime prevalence of social phobia. The cross-sectional design of the study does not permit causal inferences. Findings from this general population mental health survey demonstrated that self-criticism is robustly associated with social phobia. It may represent an important core psychological process in the complex subtype of this anxiety disorder.

Composition, training needs and independence of ethics review committees across Africa: are the gate-keepers rising to the emerging challenges?

PubMed Central

Nyika, A; Kilama, W; Chilengi, R; Tangwa, G; Tindana, P; Ndebele, P; Ikingura, J

2009-01-01

Background: The high disease burden of Africa, the emergence of new diseases and efforts to address the 10/90 gap have led to an unprecedented increase in health research activities in Africa. Consequently, there is an increase in the volume and complexity of protocols that ethics review committees in Africa have to review. Methods: With a grant from the Bill and Melinda Gates Foundation, the African Malaria Network Trust (AMANET) undertook a survey of 31 ethics review committees (ERCs) across sub-Saharan Africa as an initial step to a comprehensive capacity-strengthening programme. The number of members per committee ranged from 3 to 21, with an average of 11. Members of 10 institutional committees were all from the institution where the committees were based, raising prima facie questions as to whether independence and objectivity could be guaranteed in the review work of such committees. Results: The majority of the committees (92%) cited scientific design of clinical trials as the area needing the most attention in terms of training, followed by determination of risks and benefits and monitoring of research. The survey showed that 38% of the ERC members did not receive any form of training. In the light of the increasing complexity and numbers of health research studies being conducted in Africa, this deficit requires immediate attention. Outcome: The survey identified areas of weakness in the operations of ERCs in Africa. Consequently, AMANET is addressing the identified needs and weaknesses through a 4-year capacity-building project. PMID:19251972

Estimating under-five mortality in space and time in a developing world context.

PubMed

Wakefield, Jon; Fuglstad, Geir-Arne; Riebler, Andrea; Godwin, Jessica; Wilson, Katie; Clark, Samuel J

2018-01-01

Accurate estimates of the under-five mortality rate in a developing world context are a key barometer of the health of a nation. This paper describes a new model to analyze survey data on mortality in this context. We are interested in both spatial and temporal description, that is wishing to estimate under-five mortality rate across regions and years and to investigate the association between the under-five mortality rate and spatially varying covariate surfaces. We illustrate the methodology by producing yearly estimates for subnational areas in Kenya over the period 1980-2014 using data from the Demographic and Health Surveys, which use stratified cluster sampling. We use a binomial likelihood with fixed effects for the urban/rural strata and random effects for the clustering to account for the complex survey design. Smoothing is carried out using Bayesian hierarchical models with continuous spatial and temporally discrete components. A key component of the model is an offset to adjust for bias due to the effects of HIV epidemics. Substantively, there has been a sharp decline in Kenya in the under-five mortality rate in the period 1980-2014, but large variability in estimated subnational rates remains. A priority for future research is understanding this variability. In exploratory work, we examine whether a variety of spatial covariate surfaces can explain the variability in under-five mortality rate. Temperature, precipitation, a measure of malaria infection prevalence, and a measure of nearness to cities were candidates for inclusion in the covariate model, but the interplay between space, time, and covariates is complex.

Designing occupancy studies: general advice and allocating survey effort

USGS Publications Warehouse

MacKenzie, D.I.; Royle, J. Andrew

2005-01-01

1. The fraction of sampling units in a landscape where a target species is present (occupancy) is an extensively used concept in ecology. Yet in many applications the species will not always be detected in a sampling unit even when present, resulting in biased estimates of occupancy. Given that sampling units are surveyed repeatedly within a relatively short timeframe, a number of similar methods have now been developed to provide unbiased occupancy estimates. However, practical guidance on the efficient design of occupancy studies has been lacking. 2. In this paper we comment on a number of general issues related to designing occupancy studies, including the need for clear objectives that are explicitly linked to science or management, selection of sampling units, timing of repeat surveys and allocation of survey effort. Advice on the number of repeat surveys per sampling unit is considered in terms of the variance of the occupancy estimator, for three possible study designs. 3. We recommend that sampling units should be surveyed a minimum of three times when detection probability is high (> 0.5 survey-1), unless a removal design is used. 4. We found that an optimal removal design will generally be the most efficient, but we suggest it may be less robust to assumption violations than a standard design. 5. Our results suggest that for a rare species it is more efficient to survey more sampling units less intensively, while for a common species fewer sampling units should be surveyed more intensively. 6. Synthesis and applications. Reliable inferences can only result from quality data. To make the best use of logistical resources, study objectives must be clearly defined; sampling units must be selected, and repeated surveys timed appropriately; and a sufficient number of repeated surveys must be conducted. Failure to do so may compromise the integrity of the study. The guidance given here on study design issues is particularly applicable to studies of species occurrence and distribution, habitat selection and modelling, metapopulation studies and monitoring programmes.

A review on design of experiments and surrogate models in aircraft real-time and many-query aerodynamic analyses

NASA Astrophysics Data System (ADS)

Yondo, Raul; Andrés, Esther; Valero, Eusebio

2018-01-01

Full scale aerodynamic wind tunnel testing, numerical simulation of high dimensional (full-order) aerodynamic models or flight testing are some of the fundamental but complex steps in the various design phases of recent civil transport aircrafts. Current aircraft aerodynamic designs have increase in complexity (multidisciplinary, multi-objective or multi-fidelity) and need to address the challenges posed by the nonlinearity of the objective functions and constraints, uncertainty quantification in aerodynamic problems or the restrained computational budgets. With the aim to reduce the computational burden and generate low-cost but accurate models that mimic those full order models at different values of the design variables, Recent progresses have witnessed the introduction, in real-time and many-query analyses, of surrogate-based approaches as rapid and cheaper to simulate models. In this paper, a comprehensive and state-of-the art survey on common surrogate modeling techniques and surrogate-based optimization methods is given, with an emphasis on models selection and validation, dimensionality reduction, sensitivity analyses, constraints handling or infill and stopping criteria. Benefits, drawbacks and comparative discussions in applying those methods are described. Furthermore, the paper familiarizes the readers with surrogate models that have been successfully applied to the general field of fluid dynamics, but not yet in the aerospace industry. Additionally, the review revisits the most popular sampling strategies used in conducting physical and simulation-based experiments in aircraft aerodynamic design. Attractive or smart designs infrequently used in the field and discussions on advanced sampling methodologies are presented, to give a glance on the various efficient possibilities to a priori sample the parameter space. Closing remarks foster on future perspectives, challenges and shortcomings associated with the use of surrogate models by aircraft industrial aerodynamicists, despite their increased interest among the research communities.

Predicting Vulnerability of the Integrity and Connectivity Associated with Culverts in Low Order Streams of Northern Michigan

NASA Astrophysics Data System (ADS)

King, C. H.; Wagenbrenner, J.; Fedora, M.; Watkins, D.; Watkins, M. K.; Huckins, C.

2017-12-01

The Great Lakes Region of North America has experienced more frequent extreme precipitation events in recent decades, resulting in a large number of stream crossing failures. While there are accepted methods for designing stream crossings to accommodate peak storm discharges, less attention has been paid to assessing the risk of failure. To evaluate failure risk and potential impacts, coarse-resolution stream crossing surveys were completed on 51 stream crossings and dams in the North Branch Paint River watershed in Michigan's Upper Peninsula. These inventories determined stream crossing dimensions along with stream and watershed characteristics. Eleven culverts were selected from the coarse surveys for high resolution hydraulic analysis to estimate discharge conditions expected at crossing failure. Watershed attributes upstream of the crossing, including area, slope, and storage, were acquired. Sediment discharge and the economic impact associated with a failure event were also estimated for each stream crossing. Impacts to stream connectivity and fish passability were assessed from the coarse-level surveys. Using information from both the coarse and high-resolution surveys, we also developed indicators to predict failure risk without the need for complex hydraulic modeling. These passability scores and failure risk indicators will help to prioritize infrastructure replacement and improve the overall connectivity of river systems throughout the upper Great Lakes Region.

Essential elements of the nursing practice environment in nursing homes: Psychometric evaluation.

PubMed

de Brouwer, Brigitte Johanna Maria; Kaljouw, Marian J; Schoonhoven, Lisette; van Achterberg, Theo

2017-06-01

To develop and psychometrically test the Essentials of Magnetism II in nursing homes. Increasing numbers and complex needs of older people in nursing homes strain the nursing workforce. Fewer adequately trained staff and increased care complexity raise concerns about declining quality. Nurses' practice environment has been reported to affect quality of care and productivity. The Essentials of Magnetism II © measures processes and relationships of practice environments that contribute to productivity and quality of care and can therefore be useful in identifying processes requiring change to pursue excellent practice environments. However, this instrument was not explicitly evaluated for its use in nursing home settings so far. In a preparatory phase, a cross-sectional survey study focused on face validity of the essentials of magnetism in nursing homes. A second cross-sectional survey design was then used to further test the instrument's validity and reliability. Psychometric testing included evaluation of content and construct validity, and reliability. Nurses (N = 456) working at 44 units of three nursing homes were included. Respondent acceptance, relevance and clarity were adequate. Five of the eight subscales and 54 of the 58 items did meet preset psychometric criteria. All essentials of magnetism are considered relevant for nursing homes. The subscales Adequacy of Staffing, Clinically Competent Peers, Patient Centered Culture, Autonomy and Nurse Manager Support can be used in nursing homes without problems. The other subscales cannot be directly applied to this setting. The valid subscales of the Essentials of Magnetism II instrument can be used to design excellent nursing practice environments that support nurses' delivery of care. Before using the entire instrument, however, the other subscales have to be improved. © 2016 John Wiley & Sons Ltd.

77 FR 74187 - Agency Information Collection Activities: Announcement of Board Approval Under Delegated...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

...: The voluntary Retail Payments Surveys are designed to collect information needed to support the... wholesale payments, these surveys are designed to collect information on retail payments and the systems or... assisting with the survey design conducted industry outreach calls to obtain additional insights into the...

A field test of three LQAS designs to assess the prevalence of acute malnutrition.

PubMed

Deitchler, Megan; Valadez, Joseph J; Egge, Kari; Fernandez, Soledad; Hennigan, Mary

2007-08-01

The conventional method for assessing the prevalence of Global Acute Malnutrition (GAM) in emergency settings is the 30 x 30 cluster-survey. This study describes alternative approaches: three Lot Quality Assurance Sampling (LQAS) designs to assess GAM. The LQAS designs were field-tested and their results compared with those from a 30 x 30 cluster-survey. Computer simulations confirmed that small clusters instead of a simple random sample could be used for LQAS assessments of GAM. Three LQAS designs were developed (33 x 6, 67 x 3, Sequential design) to assess GAM thresholds of 10, 15 and 20%. The designs were field-tested simultaneously with a 30 x 30 cluster-survey in Siraro, Ethiopia during June 2003. Using a nested study design, anthropometric, morbidity and vaccination data were collected on all children 6-59 months in sampled households. Hypothesis tests about GAM thresholds were conducted for each LQAS design. Point estimates were obtained for the 30 x 30 cluster-survey and the 33 x 6 and 67 x 3 LQAS designs. Hypothesis tests showed GAM as <10% for the 33 x 6 design and GAM as > or =10% for the 67 x 3 and Sequential designs. Point estimates for the 33 x 6 and 67 x 3 designs were similar to those of the 30 x 30 cluster-survey for GAM (6.7%, CI = 3.2-10.2%; 8.2%, CI = 4.3-12.1%, 7.4%, CI = 4.8-9.9%) and all other indicators. The CIs for the LQAS designs were only slightly wider than the CIs for the 30 x 30 cluster-survey; yet the LQAS designs required substantially less time to administer. The LQAS designs provide statistically appropriate alternatives to the more time-consuming 30 x 30 cluster-survey. However, additional field-testing is needed using independent samples rather than a nested study design.

An elective course in personal finance for health care professionals.

PubMed

Chui, Michelle A

2009-02-19

To create, implement, and assess an elective course on the principles and applications of personal finance. A 1.5 unit (15 hours total) elective course was designed using active-learning pedagogy, lecture, and group discussion. Homework assignments were designed to provide practical tools and materials that students could individualize and apply to their personal financial goals. Student satisfaction, using a standard course evaluation form, revealed consistent high ratings. Student enrollment increased from 19 students in its initial year to 90 students in its fourth year. Student knowledge, assessed using the Jump$tart Financial Literacy Survey, indicated significant knowledge acquisition. Many pharmacy students are ill equipped to effectively handle the complex financial decisions they face after graduation. This course provides students with practical tools to identify appropriate ways to achieve their financial goals and critically evaluate financial advice and advisors.

Optimal surveillance strategy for invasive species management when surveys stop after detection.

PubMed

Guillera-Arroita, Gurutzeta; Hauser, Cindy E; McCarthy, Michael A

2014-05-01

Invasive species are a cause for concern in natural and economic systems and require both monitoring and management. There is a trade-off between the amount of resources spent on surveying for the species and conducting early management of occupied sites, and the resources that are ultimately spent in delayed management at sites where the species was present but undetected. Previous work addressed this optimal resource allocation problem assuming that surveys continue despite detection until the initially planned survey effort is consumed. However, a more realistic scenario is often that surveys stop after detection (i.e., follow a "removal" sampling design) and then management begins. Such an approach will indicate a different optimal survey design and can be expected to be more efficient. We analyze this case and compare the expected efficiency of invasive species management programs under both survey methods. We also evaluate the impact of mis-specifying the type of sampling approach during the program design phase. We derive analytical expressions that optimize resource allocation between monitoring and management in surveillance programs when surveys stop after detection. We do this under a scenario of unconstrained resources and scenarios where survey budget is constrained. The efficiency of surveillance programs is greater if a "removal survey" design is used, with larger gains obtained when savings from early detection are high, occupancy is high, and survey costs are not much lower than early management costs at a site. Designing a surveillance program disregarding that surveys stop after detection can result in an efficiency loss. Our results help guide the design of future surveillance programs for invasive species. Addressing program design within a decision-theoretic framework can lead to a better use of available resources. We show how species prevalence, its detectability, and the benefits derived from early detection can be considered.

Relating Factors for Depression in Korean Working Women: Secondary Analysis of the Fifth Korean National Health and Nutrition Examination Survey (KNHANES V).

PubMed

Lee, Kyung-Jae; Kim, Jeung-Im

2015-09-01

The purpose of this study was to investigate the health behaviors and risk factors for self-reported depression in Korean working women. This study adopted a secondary analysis from the fifth Korean National Health and Nutrition Examination Survey (KNHANES-V) for the Health Examination Survey and Health Behavior Survey, using stratified, multi-stage, cluster-sampling design to obtain a nationally representative sample. Data were gathered on extensive information including sociodemographic, occupational characteristics, health behaviors and depression. Multiple logistic regression analysis was employed to compute the odds ratio (OR) between health behaviors and depression to identify the health behaviors and the risk factors for depression with adjustment for the complex sample design of the survey. The prevalence rate of depression was 15.5% among working women. Depression was more common in older female workers and in those with part-time job. Current smokers were significantly more likely to be depression-positive. In a multiple logistic regression analysis, significant variables of depression were marital status (OR = 2.02; 95% CI [1.05, 3.89]), smoking status (OR = 1.55; 95% CI [1.01, 2.38]), stress (OR = 0.20; 95% CI [0.15, 0.26]), employment condition (OR = 1.77; 95% CI [1.34, 2.33]) and health status (OR = 2.10; 95% CI [1.53, 2.87]). Based on the study, factors leading to depression were marital status, current smoking, stress, employment condition and self-reported health status. Further studies are expected to unravel the characteristics of stress. Health care providers for women need to evaluate underreported depression and change their associated health behaviors. Also it is necessary to establish preventive strategies for female workers to control the negative effect of depression in the workplace. Copyright © 2015. Published by Elsevier B.V.

Reliability of the Nursing Home Survey Process: A Simultaneous Survey Approach

ERIC Educational Resources Information Center

Lee, Robert H.; Gajewski, Byron J.; Thompson, Sarah

2006-01-01

Purpose: We designed this study to examine the reliability of the nursing home survey process in the state of Kansas using regular and simultaneous survey teams. In particular, the study examined how two survey teams exposed to the same information at the same time differed in their interpretations. Design and Methods: The protocol for…

23 CFR 1340.4 - In general.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.4 In general. This subpart sets forth the minimum design requirements to be incorporated in surveys conducted under this part. ...

23 CFR 1340.4 - In general.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.4 In general. This subpart sets forth the minimum design requirements to be incorporated in surveys conducted under this part. ...

23 CFR 1340.4 - In general.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.4 In general. This subpart sets forth the minimum design requirements to be incorporated in surveys conducted under this part. ...

Designing community surveys to provide a basis for noise policy

NASA Technical Reports Server (NTRS)

Fields, J. M.

1980-01-01

After examining reports from a large number of social surveys, two areas were identified where methodological improvements in the surveys would be especially useful for public policy. The two study areas are: the definition of noise indexes and the assessment of noise impact. Improvements in the designs of surveys are recommended which would increase the validity and reliability of the noise indexes. Changes in interview questions and sample designs are proposed which would enable surveys to provide measures of noise impact which are directly relevant for public policy.

[Giving up life in the labyrinth].

PubMed

Portera Sánchez, A

2001-01-01

A brief historic survey of the labyrinth, from prehistoric images carved in stone, to gardens, Renaissance drawings and architectonic constructions will presented. The metaphor of the labyrinths, which began with Theseus killing the Minotaur with the help of Ariadne, can be applied to all: scientific investigation, artistic creation, wickedness, theology ... to life. In these eculiar and chaotic designs, structural simplicity and functional complexity coincide and therefore may produce repeated erroneous decisions. To wander successfully through these labyrinths, caution and repeated decision-makings are required to enable the traveller to reach the desired and elusive center. In each instant, decisions are made in our mind as a consequence of complex cerebral systems, activated by stimuli which originate in the intimate regions of the mind, the most complex labyrinth of all. These types of mental labyrinths are immaterial, without paths or walks, where each successive decision made facing multiple bifurcations, causes the mental traveller to advance until reaching the center. This center deceptively becomes the entrance to another of the innumerable and unknown mental labyrinths that the intimate life proposes.

A Consideration of the Perspectives of Healing Practitioners on Research Into Energy Healing

PubMed Central

Bruyere, Rosalyn L.; Weintrub, Ken; Dieppe, Paul

2015-01-01

Energy healing is a complex intervention with the purpose of enhancing wholeness within the client. Approaches to complex interventions require thoughtful utilization of a wide range of research methods. In order to advance the research in this field, we sought to understand the healing practitioners' point of view by reviewing qualitative literature, research reviews, and commentary written by and about practitioners. Further, we conducted a brief survey among healers, asking their opinions on types and topics of research in this field. Emerging from this inquiry is an overview of the healers' state required for successful healing, the importance of the clients' contribution, the heterogeneity of the process of healing, and the importance of choosing appropriate outcomes to reflect the goal of wholeness. Beyond attending to measurement of these nuanced aspects, we propose utilization of research designs appropriate for complex interventions, more use of qualitative research techniques, consideration of large data registries, and adoption of the perspectives of realist research. An important gap identified was the overall lack of understanding of the clients' experience and contribution to the healing encounter. PMID:26665045

Mission to the Trojan asteroids: Lessons learned during a JPL Planetary Science Summer School mission design exercise

NASA Astrophysics Data System (ADS)

Diniega, Serina; Sayanagi, Kunio M.; Balcerski, Jeffrey; Carande, Bryce; Diaz-Silva, Ricardo A.; Fraeman, Abigail A.; Guzewich, Scott D.; Hudson, Jennifer; Nahm, Amanda L.; Potter-McIntyre, Sally; Route, Matthew; Urban, Kevin D.; Vasisht, Soumya; Benneke, Bjoern; Gil, Stephanie; Livi, Roberto; Williams, Brian; Budney, Charles J.; Lowes, Leslie L.

2013-02-01

The 2013 Planetary Science Decadal Survey identified a detailed investigation of the Trojan asteroids occupying Jupiter's L4 and L5 Lagrange points as a priority for future NASA missions. Observing these asteroids and measuring their physical characteristics and composition would aid in identification of their source and provide answers about their likely impact history and evolution, thus yielding information about the makeup and dynamics of the early Solar System. We present a conceptual design for a mission to the Jovian Trojan asteroids: the Trojan ASteroid Tour, Exploration, and Rendezvous (TASTER) mission, that is consistent with the NASA New Frontiers candidate mission recommended by the Decadal Survey and the final result of the 2011 NASA-JPL Planetary Science Summer School. Our proposed mission includes visits to two Trojans in the L4 population: a 500 km altitude fly-by of 1999 XS143, followed by a rendezvous with and detailed observations of 911 Agamemnon at orbital altitudes of 1000-100 km over a 12 month nominal science data capture period. Our proposed instrument payload - wide- and narrow-angle cameras, a visual and infrared mapping spectrometer, and a neutron/gamma ray spectrometer - would provide unprecedented high-resolution, regional-to-global datasets for the target bodies, yielding fundamental information about the early history and evolution of the Solar System. Although our mission design was completed as part of an academic exercise, this study serves as a useful starting point for future Trojan mission design studies. In particular, we identify and discuss key issues that can make large differences in the complex trade-offs required when designing a mission to the Trojan asteroids.

Quantifying and reducing statistical uncertainty in sample-based health program costing studies in low- and middle-income countries.

PubMed

Rivera-Rodriguez, Claudia L; Resch, Stephen; Haneuse, Sebastien

2018-01-01

In many low- and middle-income countries, the costs of delivering public health programs such as for HIV/AIDS, nutrition, and immunization are not routinely tracked. A number of recent studies have sought to estimate program costs on the basis of detailed information collected on a subsample of facilities. While unbiased estimates can be obtained via accurate measurement and appropriate analyses, they are subject to statistical uncertainty. Quantification of this uncertainty, for example, via standard errors and/or 95% confidence intervals, provides important contextual information for decision-makers and for the design of future costing studies. While other forms of uncertainty, such as that due to model misspecification, are considered and can be investigated through sensitivity analyses, statistical uncertainty is often not reported in studies estimating the total program costs. This may be due to a lack of awareness/understanding of (1) the technical details regarding uncertainty estimation and (2) the availability of software with which to calculate uncertainty for estimators resulting from complex surveys. We provide an overview of statistical uncertainty in the context of complex costing surveys, emphasizing the various potential specific sources that contribute to overall uncertainty. We describe how analysts can compute measures of uncertainty, either via appropriately derived formulae or through resampling techniques such as the bootstrap. We also provide an overview of calibration as a means of using additional auxiliary information that is readily available for the entire program, such as the total number of doses administered, to decrease uncertainty and thereby improve decision-making and the planning of future studies. A recent study of the national program for routine immunization in Honduras shows that uncertainty can be reduced by using information available prior to the study. This method can not only be used when estimating the total cost of delivering established health programs but also to decrease uncertainty when the interest lies in assessing the incremental effect of an intervention. Measures of statistical uncertainty associated with survey-based estimates of program costs, such as standard errors and 95% confidence intervals, provide important contextual information for health policy decision-making and key inputs for the design of future costing studies. Such measures are often not reported, possibly because of technical challenges associated with their calculation and a lack of awareness of appropriate software. Modern statistical analysis methods for survey data, such as calibration, provide a means to exploit additional information that is readily available but was not used in the design of the study to significantly improve the estimation of total cost through the reduction of statistical uncertainty.

Quantifying and reducing statistical uncertainty in sample-based health program costing studies in low- and middle-income countries

PubMed Central

Resch, Stephen

2018-01-01

Objectives: In many low- and middle-income countries, the costs of delivering public health programs such as for HIV/AIDS, nutrition, and immunization are not routinely tracked. A number of recent studies have sought to estimate program costs on the basis of detailed information collected on a subsample of facilities. While unbiased estimates can be obtained via accurate measurement and appropriate analyses, they are subject to statistical uncertainty. Quantification of this uncertainty, for example, via standard errors and/or 95% confidence intervals, provides important contextual information for decision-makers and for the design of future costing studies. While other forms of uncertainty, such as that due to model misspecification, are considered and can be investigated through sensitivity analyses, statistical uncertainty is often not reported in studies estimating the total program costs. This may be due to a lack of awareness/understanding of (1) the technical details regarding uncertainty estimation and (2) the availability of software with which to calculate uncertainty for estimators resulting from complex surveys. We provide an overview of statistical uncertainty in the context of complex costing surveys, emphasizing the various potential specific sources that contribute to overall uncertainty. Methods: We describe how analysts can compute measures of uncertainty, either via appropriately derived formulae or through resampling techniques such as the bootstrap. We also provide an overview of calibration as a means of using additional auxiliary information that is readily available for the entire program, such as the total number of doses administered, to decrease uncertainty and thereby improve decision-making and the planning of future studies. Results: A recent study of the national program for routine immunization in Honduras shows that uncertainty can be reduced by using information available prior to the study. This method can not only be used when estimating the total cost of delivering established health programs but also to decrease uncertainty when the interest lies in assessing the incremental effect of an intervention. Conclusion: Measures of statistical uncertainty associated with survey-based estimates of program costs, such as standard errors and 95% confidence intervals, provide important contextual information for health policy decision-making and key inputs for the design of future costing studies. Such measures are often not reported, possibly because of technical challenges associated with their calculation and a lack of awareness of appropriate software. Modern statistical analysis methods for survey data, such as calibration, provide a means to exploit additional information that is readily available but was not used in the design of the study to significantly improve the estimation of total cost through the reduction of statistical uncertainty. PMID:29636964

DADOS-Survey: an open-source application for CHERRIES-compliant Web surveys

PubMed Central

Shah, Anand; Jacobs, Danny O; Martins, Henrique; Harker, Matthew; Menezes, Andreia; McCready, Mariana; Pietrobon, Ricardo

2006-01-01

Background The Internet has been increasingly utilized in biomedical research. From online searching for literature to data sharing, the Internet has emerged as a primary means of research for many physicians and scientists. As a result, Web-based surveys have been employed as an alternative to traditional, paper-based surveys. We describe DADOS-Survey, an open-source Web-survey application developed at our institution that, to the best of our knowledge, is the first to be compliant with the Checklist for Reporting Results of Internet E-Surveys (CHERRIES). DADOS-Survey was designed with usability as a priority, allowing investigators to design and execute their own studies with minimal technical difficulties in doing so. Results To date, DADOS-Survey has been successfully implemented in five Institutional Review Board-approved studies conducted by various departments within our academic center. Each of these studies employed a Web-survey design as their primary methodology. Our initial experience indicates that DADOS-Survey has been used with relative ease by each of the investigators and survey recipients. This has been further demonstrated through formal and field usability testing, during which time suggestions for improvement were incorporated into the software design. Conclusion DADOS-Survey has the potential to have an important role in the future direction of Web-survey administration in biomedical research. This CHERRIES-compliant application is tailored to the emerging requirements of quality data collection in medicine. PMID:16978409

The Integrated Survey for Excavated Architectures: the Complex of Casalnuovo District Within the World Heritage Site "sassi" (matera, Italy)

NASA Astrophysics Data System (ADS)

Cardinale, T.; Valva, R.; Lucarelli, M.

2015-02-01

Never as within the complex of Sassi (Matera, South of Italy), the parties have a volumetric material identity and a special construction condition for which, first of all, you need to know the whole to which they give life, and then the individual components and their connections. In the course of time, in the Lucan city, there were stable and favorable conditions that allowed the development of an architectural language, of juxtaposition of the materials, interpenetration of space and conformation of the volumes, which generated an exceptional urban phenomenon. The distribution of these building artifacts in symbiotic connection with the connective calcareous texture that hosts them , resulted in a spontaneously harmonious figurative balance that characterizes the constructive expedients employed and the distributive and morphological solutions. This is the reason why the Sassi, and the overlooking Park of Rupestrian Churches of Matera Murgia, have been entered in 1993 in the UNESCO World Heritage List. The complexity of a built space, such as this one, determines the need for a non-traditional approach, so you have to combine last generation tools and canonical ones for survey, drawing and representation, within a dialectic between memory and design, tradition and innovation. For this reason, an appropriate cognitive apparatus has been set up for the entire technical process, making use of different non-destructive and non-contact techniques: digital photogrammetry, total station, laser scanner and thermography, in order to obtain a three-dimensional computer model, useful for the diagnosis and the preservation of the integrity of cultural heritage.

Using systems thinking to support clinical system transformation.

PubMed

Best, Allan; Berland, Alex; Herbert, Carol; Bitz, Jennifer; van Dijk, Marlies W; Krause, Christina; Cochrane, Douglas; Noel, Kevin; Marsden, Julian; McKeown, Shari; Millar, John

2016-05-16

Purpose - The British Columbia Ministry of Health's Clinical Care Management initiative was used as a case study to better understand large-scale change (LSC) within BC's health system. Using a complex system framework, the purpose of this paper is to examine mechanisms that enable and constrain the implementation of clinical guidelines across various clinical settings. Design/methodology/approach - Researchers applied a general model of complex adaptive systems plus two specific conceptual frameworks (realist evaluation and system dynamics mapping) to define and study enablers and constraints. Focus group sessions and interviews with clinicians, executives, managers and board members were validated through an online survey. Findings - The functional themes for managing large-scale clinical change included: creating a context to prepare clinicians for health system transformation initiatives; promoting shared clinical leadership; strengthening knowledge management, strategic communications and opportunities for networking; and clearing pathways through the complexity of a multilevel, dynamic system. Research limitations/implications - The action research methodology was designed to guide continuing improvement of implementation. A sample of initiatives was selected; it was not intended to compare and contrast facilitators and barriers across all initiatives and regions. Similarly, evaluating the results or process of guideline implementation was outside the scope; the methods were designed to enable conversations at multiple levels - policy, management and practice - about how to improve implementation. The study is best seen as a case study of LSC, offering a possible model for replication by others and a tool to shape further dialogue. Practical implications - Recommended action-oriented strategies included engaging local champions; supporting local adaptation for implementation of clinical guidelines; strengthening local teams to guide implementation; reducing change fatigue; ensuring adequate resources; providing consistent communication especially for front-line care providers; and supporting local teams to demonstrate the clinical value of the guidelines to their colleagues. Originality/value - Bringing a complex systems perspective to clinical guideline implementation resulted in a clear understanding of the challenges involved in LSC.

Large scale magmatic event, magnetic anomalies and ore exploration in northern Norway

NASA Astrophysics Data System (ADS)

Pastore, Z.; Church, N. S.; ter Maat, G. W.; Michels, A.; McEnroe, S. A.; Fichler, C.; Larsen, R. B.

2016-12-01

More than 17000 km3of igneous melts intruded into the deep crust at ca. 560-580 Ma and formed the Seiland Igneous Province (SIP), the largest complex of mafic and ultramafic intrusions in northern Fennoscandia. The original emplacement of the SIP is matter of current discussion. The SIP is now located within the Kalak Nappe Complex (KNC), a part of the Middle Allochthon of the North Norwegian Caledonides. The province is believed to represent a cross section of the deep plumbing system of a large igneous province and it is known for its layered intrusions sharing geological features with large ore-forming exploration provinces. In this study we investigate one of the four major ultramafic complexes of the province, the Reinfjord Complex. This was emplaced during three magmatic events in a time span of 4 Ma, and consists in a cylindrically zoned complex with a slightly younger dunite core (Central Series) surrounded by wehrlite and lherzolite dominated series (Upper and Lower Layered Series). Sulphides are present throughout the complex, and an electromagnetic survey identified a Ni-Cu-and a PGE reef deposit within the dunite, 100 meters below the surface. This discovery increased the ore potential of the complex and subsequently 4 deep drill cores were made. High-resolution magnetic helicopter survey was later followed up with ground magnetic and gravity surveys. Extensive sampling of surface rocks and drill cores were made to measure the rock-magnetic and physical properties of the samples and to explore the subsurface structure of the complex. Here, we developed a magnetic model for the Reinfjord complex integrating petrophysical data from both oriented surface samples and from the deep drill cores, with the new ground magnetic, and helicopter data (SkyTEM survey). A 3D model of the geometry of the ultramafic intrusion is presented and a refinement of the geological interpretation of the Reinfjord ultramafic intrusion.

Using case study within a sequential explanatory design to evaluate the impact of specialist and advanced practice roles on clinical outcomes: the SCAPE study.

PubMed

Lalor, Joan G; Casey, Dympna; Elliott, Naomi; Coyne, Imelda; Comiskey, Catherine; Higgins, Agnes; Murphy, Kathy; Devane, Declan; Begley, Cecily

2013-04-08

The role of the clinical nurse/midwife specialist and advanced nurse/midwife practitioner is complex not least because of the diversity in how the roles are operationalised across health settings and within multidisciplinary teams. This aim of this paper is to use The SCAPE Study: Specialist Clinical and Advanced Practitioner Evaluation in Ireland to illustrate how case study was used to strengthen a Sequential Explanatory Design. In Phase 1, clinicians identified indicators of specialist and advanced practice which were then used to guide the instrumental case study design which formed the second phase of the larger study. Phase 2 used matched case studies to evaluate the effectiveness of specialist and advanced practitioners on clinical outcomes for service users. Data were collected through observation, documentary analysis, and interviews. Observations were made of 23 Clinical Specialists or Advanced Practitioners, and 23 matched clinicians in similar matched non-postholding sites, while they delivered care. Forty-one service users, 41 clinicians, and 23 Directors of Nursing or Midwifery were interviewed, and 279 service users completed a survey based on the components of CS and AP practice identified in Phase 1. A coding framework, and the generation of cross tabulation matrices in NVivo, was used to make explicit how the outcome measures were confirmed and validated from multiple sources. This strengthened the potential to examine single cases that seemed 'different', and allowed for cases to be redefined. Phase 3 involved interviews with policy-makers to set the findings in context. Case study is a powerful research strategy to use within sequential explanatory mixed method designs, and adds completeness to the exploration of complex issues in clinical practice. The design is flexible, allowing the use of multiple data collection methods from both qualitative and quantitative paradigms. Multiple approaches to data collection are needed to evaluate the impact of complex roles and interventions in health care outcomes and service delivery. Case study design is an appropriate methodology to use when study outcomes relate to clinical practice.

Using complexity theory to develop a student-directed interprofessional learning activity for 1220 healthcare students.

PubMed

Jorm, Christine; Nisbet, Gillian; Roberts, Chris; Gordon, Christopher; Gentilcore, Stacey; Chen, Timothy F

2016-08-08

More and better interprofessional practice is predicated to be necessary to deliver good care to the patients of the future. However, universities struggle to create authentic learning activities that enable students to experience the dynamic interprofessional interactions common in healthcare and that can accommodate large interprofessional student cohorts. We investigated a large-scale mandatory interprofessional learning (IPL) activity for health professional students designed to promote social learning. A mixed methods research approach determined feasibility, acceptability and the extent to which student IPL outcomes were met. We developed an IPL activity founded in complexity theory to prepare students for future practice by engaging them in a self-directed (self-organised) learning activity with a diverse team, whose assessable products would be emergent creations. Complicated but authentic clinical cases (n = 12) were developed to challenge student teams (n = 5 or 6). Assessment consisted of a written management plan (academically marked) and a five-minute video (peer marked) designed to assess creative collaboration as well as provide evidence of integrated collective knowledge; the cohesive patient-centred management plan. All students (including the disciplines of diagnostic radiology, exercise physiology, medicine, nursing, occupational therapy, pharmacy, physiotherapy and speech pathology), completed all tasks successfully. Of the 26 % of students who completed the evaluation survey, 70 % agreed or strongly agreed that the IPL activity was worthwhile, and 87 % agreed or strongly agreed that their case study was relevant. Thematic analysis found overarching themes of engagement and collaboration-in-action suggesting that the IPL activity enabled students to achieve the intended learning objectives. Students recognised the contribution of others and described negotiation, collaboration and creation of new collective knowledge after working together on the complicated patient case studies. The novel video assessment was challenging to many students and contextual issues limited engagement for some disciplines. We demonstrated the feasibility and acceptability of a large scale IPL activity where design of cases, format and assessment tasks was founded in complexity theory. This theoretically based design enabled students to achieve complex IPL outcomes relevant to future practice. Future research could establish the psychometric properties of assessments of student performance in large-scale IPL events.

STRUCTURE IN THE 3D GALAXY DISTRIBUTION: III. FOURIER TRANSFORMING THE UNIVERSE: PHASE AND POWER SPECTRA.

PubMed

Scargle, Jeffrey D; Way, M J; Gazis, P R

2017-04-10

We demonstrate the effectiveness of a relatively straightforward analysis of the complex 3D Fourier transform of galaxy coordinates derived from redshift surveys. Numerical demonstrations of this approach are carried out on a volume-limited sample of the Sloan Digital Sky Survey redshift survey. The direct unbinned transform yields a complex 3D data cube quite similar to that from the Fast Fourier Transform (FFT) of finely binned galaxy positions. In both cases deconvolution of the sampling window function yields estimates of the true transform. Simple power spectrum estimates from these transforms are roughly consistent with those using more elaborate methods. The complex Fourier transform characterizes spatial distributional properties beyond the power spectrum in a manner different from (and we argue is more easily interpreted than) the conventional multi-point hierarchy. We identify some threads of modern large scale inference methodology that will presumably yield detections in new wider and deeper surveys.

STRUCTURE IN THE 3D GALAXY DISTRIBUTION: III. FOURIER TRANSFORMING THE UNIVERSE: PHASE AND POWER SPECTRA

PubMed Central

Scargle, Jeffrey D.; Way, M. J.; Gazis, P. R.

2017-01-01

We demonstrate the effectiveness of a relatively straightforward analysis of the complex 3D Fourier transform of galaxy coordinates derived from redshift surveys. Numerical demonstrations of this approach are carried out on a volume-limited sample of the Sloan Digital Sky Survey redshift survey. The direct unbinned transform yields a complex 3D data cube quite similar to that from the Fast Fourier Transform (FFT) of finely binned galaxy positions. In both cases deconvolution of the sampling window function yields estimates of the true transform. Simple power spectrum estimates from these transforms are roughly consistent with those using more elaborate methods. The complex Fourier transform characterizes spatial distributional properties beyond the power spectrum in a manner different from (and we argue is more easily interpreted than) the conventional multi-point hierarchy. We identify some threads of modern large scale inference methodology that will presumably yield detections in new wider and deeper surveys. PMID:29628519

Structure in the 3D Galaxy Distribution. III. Fourier Transforming the Universe: Phase and Power Spectra

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scargle, Jeffrey D.; Way, M. J.; Gazis, P. R., E-mail: Jeffrey.D.Scargle@nasa.gov, E-mail: Michael.J.Way@nasa.gov, E-mail: PGazis@sbcglobal.net

We demonstrate the effectiveness of a relatively straightforward analysis of the complex 3D Fourier transform of galaxy coordinates derived from redshift surveys. Numerical demonstrations of this approach are carried out on a volume-limited sample of the Sloan Digital Sky Survey redshift survey. The direct unbinned transform yields a complex 3D data cube quite similar to that from the Fast Fourier Transform of finely binned galaxy positions. In both cases, deconvolution of the sampling window function yields estimates of the true transform. Simple power spectrum estimates from these transforms are roughly consistent with those using more elaborate methods. The complex Fouriermore » transform characterizes spatial distributional properties beyond the power spectrum in a manner different from (and we argue is more easily interpreted than) the conventional multipoint hierarchy. We identify some threads of modern large-scale inference methodology that will presumably yield detections in new wider and deeper surveys.« less

Structure in the 3D Galaxy Distribution: III. Fourier Transforming the Universe: Phase and Power Spectra

NASA Technical Reports Server (NTRS)

Scargle, Jeffrey D.; Way, M. J.; Gazis, P. R.

2017-01-01

We demonstrate the effectiveness of a relatively straightforward analysis of the complex 3D Fourier transform of galaxy coordinates derived from redshift surveys. Numerical demonstrations of this approach are carried out on a volume-limited sample of the Sloan Digital Sky Survey redshift survey. The direct unbinned transform yields a complex 3D data cube quite similar to that from the Fast Fourier Transform (FFT) of finely binned galaxy positions. In both cases deconvolution of the sampling window function yields estimates of the true transform. Simple power spectrum estimates from these transforms are roughly consistent with those using more elaborate methods. The complex Fourier transform characterizes spatial distributional properties beyond the power spectrum in a manner different from (and we argue is more easily interpreted than) the conventional multi-point hierarchy. We identify some threads of modern large scale inference methodology that will presumably yield detections in new wider and deeper surveys.

23 CFR 1340.5 - Selection of observation sites.

Code of Federal Regulations, 2013 CFR

2013-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.5 Selection of... observation sites. The survey design shall include at a minimum the following protocols: (1) Protocol when...

23 CFR 1340.5 - Selection of observation sites.

Code of Federal Regulations, 2014 CFR

2014-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.5 Selection of... observation sites. The survey design shall include at a minimum the following protocols: (1) Protocol when...

23 CFR 1340.5 - Selection of observation sites.

Code of Federal Regulations, 2012 CFR

2012-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE Survey Design Requirements § 1340.5 Selection of... observation sites. The survey design shall include at a minimum the following protocols: (1) Protocol when...

The Australian longitudinal study on male health sampling design and survey weighting: implications for analysis and interpretation of clustered data.

PubMed

Spittal, Matthew J; Carlin, John B; Currier, Dianne; Downes, Marnie; English, Dallas R; Gordon, Ian; Pirkis, Jane; Gurrin, Lyle

2016-10-31

The Australian Longitudinal Study on Male Health (Ten to Men) used a complex sampling scheme to identify potential participants for the baseline survey. This raises important questions about when and how to adjust for the sampling design when analyzing data from the baseline survey. We describe the sampling scheme used in Ten to Men focusing on four important elements: stratification, multi-stage sampling, clustering and sample weights. We discuss how these elements fit together when using baseline data to estimate a population parameter (e.g., population mean or prevalence) or to estimate the association between an exposure and an outcome (e.g., an odds ratio). We illustrate this with examples using a continuous outcome (weight in kilograms) and a binary outcome (smoking status). Estimates of a population mean or disease prevalence using Ten to Men baseline data are influenced by the extent to which the sampling design is addressed in an analysis. Estimates of mean weight and smoking prevalence are larger in unweighted analyses than weighted analyses (e.g., mean = 83.9 kg vs. 81.4 kg; prevalence = 18.0 % vs. 16.7 %, for unweighted and weighted analyses respectively) and the standard error of the mean is 1.03 times larger in an analysis that acknowledges the hierarchical (clustered) structure of the data compared with one that does not. For smoking prevalence, the corresponding standard error is 1.07 times larger. Measures of association (mean group differences, odds ratios) are generally similar in unweighted or weighted analyses and whether or not adjustment is made for clustering. The extent to which the Ten to Men sampling design is accounted for in any analysis of the baseline data will depend on the research question. When the goals of the analysis are to estimate the prevalence of a disease or risk factor in the population or the magnitude of a population-level exposure-outcome association, our advice is to adopt an analysis that respects the sampling design.

Cross-sector surveys assessing perceptions of key stakeholders towards barriers, concerns and facilitators to the appropriate use of adaptive designs in confirmatory trials.

PubMed

Dimairo, Munyaradzi; Julious, Steven A; Todd, Susan; Nicholl, Jonathan P; Boote, Jonathan

2015-12-23

Appropriately conducted adaptive designs (ADs) offer many potential advantages over conventional trials. They make better use of accruing data, potentially saving time, trial participants, and limited resources compared to conventional, fixed sample size designs. However, one can argue that ADs are not implemented as often as they should be, particularly in publicly funded confirmatory trials. This study explored barriers, concerns, and potential facilitators to the appropriate use of ADs in confirmatory trials among key stakeholders. We conducted three cross-sectional, online parallel surveys between November 2014 and January 2015. The surveys were based upon findings drawn from in-depth interviews of key research stakeholders, predominantly in the UK, and targeted Clinical Trials Units (CTUs), public funders, and private sector organisations. Response rates were as follows: 30(55 %) UK CTUs, 17(68 %) private sector, and 86(41 %) public funders. A Rating Scale Model was used to rank barriers and concerns in order of perceived importance for prioritisation. Top-ranked barriers included the lack of bridge funding accessible to UK CTUs to support the design of ADs, limited practical implementation knowledge, preference for traditional mainstream designs, difficulties in marketing ADs to key stakeholders, time constraints to support ADs relative to competing priorities, lack of applied training, and insufficient access to case studies of undertaken ADs to facilitate practical learning and successful implementation. Associated practical complexities and inadequate data management infrastructure to support ADs were reported as more pronounced in the private sector. For funders of public research, the inadequate description of the rationale, scope, and decision-making criteria to guide the planned AD in grant proposals by researchers were all viewed as major obstacles. There are still persistent and important perceptions of individual and organisational obstacles hampering the use of ADs in confirmatory trials research. Stakeholder perceptions about barriers are largely consistent across sectors, with a few exceptions that reflect differences in organisations' funding structures, experiences and characterisation of study interventions. Most barriers appear connected to a lack of practical implementation knowledge and applied training, and limited access to case studies to facilitate practical learning.

Extending cluster Lot Quality Assurance Sampling designs for surveillance programs

PubMed Central

Hund, Lauren; Pagano, Marcello

2014-01-01

Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance based on the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible non-parametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. PMID:24633656

Extending cluster lot quality assurance sampling designs for surveillance programs.

PubMed

Hund, Lauren; Pagano, Marcello

2014-07-20

Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

The model for estimation production cost of embroidery handicraft

NASA Astrophysics Data System (ADS)

Nofierni; Sriwana, IK; Septriani, Y.

2017-12-01

Embroidery industry is one of type of micro industry that produce embroidery handicraft. These industries are emerging in some rural areas of Indonesia. Embroidery clothing are produce such as scarves and clothes that show cultural value of certain region. The owner of an enterprise must calculate the cost of production before making a decision on how many products are received from the customer. A calculation approach to production cost analysis is needed to consider the feasibility of each order coming. This study is proposed to design the expert system (ES) in order to improve production management in the embroidery industry. The model will design used Fuzzy inference system as a model to estimate production cost. Research conducted based on survey and knowledge acquisitions from stakeholder of supply chain embroidery handicraft industry at Bukittinggi, West Sumatera, Indonesia. This paper will use fuzzy input where the quality, the complexity of the design and the working hours required and the result of the model are useful to manage production cost on embroidery production.

Generalizing observational study results: applying propensity score methods to complex surveys.

PubMed

Dugoff, Eva H; Schuler, Megan; Stuart, Elizabeth A

2014-02-01

To provide a tutorial for using propensity score methods with complex survey data. Simulated data and the 2008 Medical Expenditure Panel Survey. Using simulation, we compared the following methods for estimating the treatment effect: a naïve estimate (ignoring both survey weights and propensity scores), survey weighting, propensity score methods (nearest neighbor matching, weighting, and subclassification), and propensity score methods in combination with survey weighting. Methods are compared in terms of bias and 95 percent confidence interval coverage. In Example 2, we used these methods to estimate the effect on health care spending of having a generalist versus a specialist as a usual source of care. In general, combining a propensity score method and survey weighting is necessary to achieve unbiased treatment effect estimates that are generalizable to the original survey target population. Propensity score methods are an essential tool for addressing confounding in observational studies. Ignoring survey weights may lead to results that are not generalizable to the survey target population. This paper clarifies the appropriate inferences for different propensity score methods and suggests guidelines for selecting an appropriate propensity score method based on a researcher's goal. © Health Research and Educational Trust.

23 CFR Appendix A to Part 1340 - State Seat Belt Use Survey Reporting Form

Code of Federal Regulations, 2013 CFR

2013-04-01

... Office. • The reported Statewide seat belt use rate is based on a survey design that was approved by... Use, 23 CFR Part 1340. • The survey design has remained unchanged since the survey was approved by... 23 Highways 1 2013-04-01 2013-04-01 false State Seat Belt Use Survey Reporting Form A Appendix A...

23 CFR Appendix A to Part 1340 - State Seat Belt Use Survey Reporting Form

Code of Federal Regulations, 2012 CFR

2012-04-01

... Office. • The reported Statewide seat belt use rate is based on a survey design that was approved by... Use, 23 CFR Part 1340. • The survey design has remained unchanged since the survey was approved by... 23 Highways 1 2012-04-01 2012-04-01 false State Seat Belt Use Survey Reporting Form A Appendix A...

23 CFR Appendix A to Part 1340 - State Seat Belt Use Survey Reporting Form

Code of Federal Regulations, 2014 CFR

2014-04-01

... Office. • The reported Statewide seat belt use rate is based on a survey design that was approved by... Use, 23 CFR Part 1340. • The survey design has remained unchanged since the survey was approved by... 23 Highways 1 2014-04-01 2014-04-01 false State Seat Belt Use Survey Reporting Form A Appendix A...

Seven Key Principles of Program and Project Success: A Best Practices Survey

NASA Technical Reports Server (NTRS)

Bilardo, Vincent J.; Korte, John J.; Dankhoff, Walter; Langan, Kevin; Branscome, Darrell R.; Fragola, Joseph R.; Dugal, Dale J.; Gormley, Thomas J.; Hammond, Walter E.; Hollopeter, James J.;

Exploring the Design and Role of Mobile Apps for Healthcare Providers to Find Teratogenic Information

PubMed Central

Lie, Lily; Shetty, Vishwas; Gupta, Karan; Polifka, Janine E; Markham, Glen; Albee, Sarah; Collins, Carol; Hsieh, Gary

2017-01-01

Healthcare providers (HCPs) caring for pregnant patients often need information on drug risks to the embryo or fetus, but such complex information takes time to find and is difficult to convey on an app. In this work, we first surveyed 167 HCPs to understand their current teratogen information-seeking practices to help inform our general design goals. Using the insights gained, we then designed a prototype of a mobile app and tested it with 22 HCPs. We learned that HCP ’s information needs in this context can be grouped into 3 types: to understand, to decide, and to explain. Different sets of information and features may be needed to support these different needs. Further, while some HCPs had concerns about appearing unprofessional and unknowledgeable when using the app in front of patients, many did not. They noted that incorporating mobile information apps into practice improves information access, can help signal care and technology-savviness, in addition to providing an opportunity to engage and educate patients. Implications for design and additional features for reference apps for HCPs are discussed. PMID:29854178

Tackling the Survey: A Learning-by-Induction Design

ERIC Educational Resources Information Center

Witte, Anne E.

2017-01-01

Free online survey tools provide a practical learning-by-induction platform for business communication instructors interested in trying out an advanced multidisciplinary survey activity coupled with an innovative teaching design. More than just building skills in marketing, survey projects marshal a wider set of thinking and doing activities that…

77 FR 15722 - Southern California Hook and Line Survey; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-16

... meeting to evaluate the Southern California Shelf Rockfish Hook and Line Survey which was designed to... and Line survey design and protocols; (2) examine the analytical methods used to generate rockfish... California Hook and Line Survey; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National...

76 FR 57037 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-15

... survey) designed to assist the Board in meeting the reporting requirements in section 920(a) related to... network survey, and a merchant acquirer/processor survey) designed to gather information to assist the... Paperwork Reduction Act (PRA), the Board is requesting comment on four surveys related to its obligations...

78 FR 65654 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... integration of surveys within DHHS. It is designed to collect needed health and well-being data at the... sponsor needs. This project consists of a national survey designed to collect information about families... State and Local Area Integrated Telephone Survey (SLAITS) (The National Survey of the Diagnosis and...

Infrared near-Earth-object survey modeling for observatories interior to the Earth's orbit

NASA Astrophysics Data System (ADS)

Buie, M.

2014-07-01

The search for and dynamical characterization of the near-Earth population of objects (NEOs) has been a busy topic for surveys for many years. Most of the work thus far has been from ground-based optical surveys such as the Catalina Sky Survey and LINEAR. These surveys have essentially reached a complete inventory of objects down to 1 km diameter and have shown that the known objects do not pose any significant impact threat. Smaller objects are correspondingly smaller threats but there are more of them and fewer of them have so far been discovered. The next generation of surveys is looking to extend their reach down to much smaller sizes. From an impact risk perspective, those objects as small as 30--40 m are still of interest (similar in size to the Tunguska bolide). Smaller objects than this are largely of interest from a space resource or in-situ analysis efforts. A recent mission concept promoted by the B612 Foundation and Ball Aerospace calls for an infrared survey telescope in a Venus-like orbit, known as the Sentinel Mission. This wide-field facility has been designed to complete the inventory down to a 140 m diameter while also providing substantial constraints on the NEO population down to a Tunguska-sized object. I have been working to develop a suite of tools to provide survey modeling for this class of survey telescope. The purpose of the tool is to uncover hidden complexities that govern mission design and operation while also working to quantitatively understand the orbit quality provided on its catalog of objects without additional followup assets. The baseline mission design calls for a 6.5 year survey lifetime. This survey model is a statistically based tool for establishing completeness as a function of object size and survey duration. Effects modeled include the ability to adjust the field-of-regard (includes all pointing restrictions), field-of-view, focal plane array fill factor, and the observatory orbit. Consequences tracked include time-tagged detection times from which orbit quality can be derived and efficiency by dynamical class. The dominant noise term in the simulations comes from the noise in the background flux caused by thermal emission from zodiacal dust. The model used is sufficient for the study of reasonably low-inclination spacecraft orbits such as are being considered. Results to date are based on the 2002 Bottke NEA orbit-distribution model. The system can work with any orbit-distribution model and with any size-frequency distribution. This tool also serves to quantify the amount of data that will also be collected on main-belt objects by simply testing against the known catalog of bodies. The orbit quality work clearly shows the benefit of a self-followup survey such as Sentinel. Most objects discovered will be seen in multiple observing epochs and the resulting orbits will preclude losing track of them for decades to come (or longer). All of the ephemeris calculations, including investigation of orbit determination quality, are done with the OpenOrb software package. The presentation for this meeting will be based on results of modeling the Sentinel Mission and other similar variants. The focus will be on evaluating the survey completion for different dynamical classes as well as for different sized objects. Within the fidelity of such statistically-based models, the planned Sentinel observatory is well capable of a huge step forward in the efforts to build a complete catalog of all objects that could pose future harm to planet Earth.

Morphological characterization of coral reefs by combining lidar and MBES data: A case study from Yuanzhi Island, South China Sea

NASA Astrophysics Data System (ADS)

Zhang, Kai; Yang, Fanlin; Zhang, Hande; Su, Dianpeng; Li, QianQian

2017-06-01

The correlation between seafloor morphological features and biological complexity has been identified in numerous recent studies. This research focused on the potential for accurate characterization of coral reefs based on high-resolution bathymetry from multiple sources. A standard deviation (STD) based method for quantitatively characterizing terrain complexity was developed that includes robust estimation to correct for irregular bathymetry and a calibration for the depth-dependent variablity of measurement noise. Airborne lidar and shipborne sonar bathymetry measurements from Yuanzhi Island, South China Sea, were merged to generate seamless high-resolution coverage of coral bathymetry from the shoreline to deep water. The new algorithm was applied to the Yuanzhi Island surveys to generate maps of quantitive terrain complexity, which were then compared to in situ video observations of coral abundance. The terrain complexity parameter is significantly correlated with seafloor coral abundance, demonstrating the potential for accurately and efficiently mapping coral abundance through seafloor surveys, including combinations of surveys using different sensors.

KSC-08pd3755

NASA Image and Video Library

2008-11-18

CAPE CANAVERAL, Fla. – Workers at Launch Complex 17-B on Cape Canaveral Air Force Station in Florida place sections of the large patch that describes the Kepler spacecraft mission to be launched by the Delta 2 rocket. The Kepler mission is specifically designed to survey our region of the Milky Way galaxy to discover hundreds of Earth-size and smaller planets in or near the habitable zone and determine how many of the billions of stars in our galaxy have such planets. Results from this mission will allow us to place our solar system within the continuum of planetary systems in the Galaxy. Photo credit: NASA/Jim Grossmann

KSC-08pd3756

NASA Image and Video Library

2008-11-18

CAPE CANAVERAL, Fla. – Workers at Launch Complex 17-B on Cape Canaveral Air Force Station in Florida place the large patch on the Delta 2 rocket that describes the Kepler spacecraft mission to be launched by the rocket. The Kepler mission is specifically designed to survey our region of the Milky Way galaxy to discover hundreds of Earth-size and smaller planets in or near the habitable zone and determine how many of the billions of stars in our galaxy have such planets. Results from this mission will allow us to place our solar system within the continuum of planetary systems in the Galaxy. Photo credit: NASA/Jim Grossmann

Multi-scale modelling of rubber-like materials and soft tissues: an appraisal

PubMed Central

Puglisi, G.

2016-01-01

We survey, in a partial way, multi-scale approaches for the modelling of rubber-like and soft tissues and compare them with classical macroscopic phenomenological models. Our aim is to show how it is possible to obtain practical mathematical models for the mechanical behaviour of these materials incorporating mesoscopic (network scale) information. Multi-scale approaches are crucial for the theoretical comprehension and prediction of the complex mechanical response of these materials. Moreover, such models are fundamental in the perspective of the design, through manipulation at the micro- and nano-scales, of new polymeric and bioinspired materials with exceptional macroscopic properties. PMID:27118927

Reasoning methods in medical consultation systems: artificial intelligence approaches.

PubMed

Shortliffe, E H

1984-01-01

It has been argued that the problem of medical diagnosis is fundamentally ill-structured, particularly during the early stages when the number of possible explanations for presenting complaints can be immense. This paper discusses the process of clinical hypothesis evocation, contrasts it with the structured decision making approaches used in traditional computer-based diagnostic systems, and briefly surveys the more open-ended reasoning methods that have been used in medical artificial intelligence (AI) programs. The additional complexity introduced when an advice system is designed to suggest management instead of (or in addition to) diagnosis is also emphasized. Example systems are discussed to illustrate the key concepts.

Optical Design for a Survey X-Ray Telescope

NASA Technical Reports Server (NTRS)

Saha, Timo T.; Zhang, William W.; McClelland, Ryan S.

2014-01-01

Optical design trades are underway at the Goddard Space Flight Center to define a telescope for an x-ray survey mission. Top-level science objectives of the mission include the study of x-ray transients, surveying and long-term monitoring of compact objects in nearby galaxies, as well as both deep and wide-field x-ray surveys. In this paper we consider Wolter, Wolter-Schwarzschild, and modified Wolter-Schwarzschild telescope designs as basic building blocks for the tightly nested survey telescope. Design principles and dominating aberrations of individual telescopes and nested telescopes are discussed and we compare the off-axis optical performance at 1.0 KeV and 4.0 KeV across a 1.0-degree full field-of-view.

77 FR 42189 - Marine Recreational Fisheries of the United States; National Saltwater Angler Registry and State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-18

... improvements to the design and management of survey and estimation methods used to produce marine recreational... to these effort surveys provides for continued pilot testing of effort sampling designs that use both... NMFS determine what specific sampling design to use in MRIP effort surveys on the Atlantic and Gulf...

77 FR 12597 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... survey tools, and the research methodology to test content, format, and design of labeling is based on... information will have practical utility. (Response) The survey is designed to elicit responses on the... do so. This survey is designed for the health care provider and their feedback. (Comment 2) Comment 2...

Teaching Structure from Motion to Undergraduates: New Learning Module for Field Geoscience Courses

NASA Astrophysics Data System (ADS)

Pratt-Sitaula, B. A.; Shervais, K.; Crosby, C. J.; Douglas, B. J.; Crosby, B. T.; Charlevoix, D. J.

2016-12-01

With photogrammetry use expanding rapidly, it is essential to integrate these methods into undergraduate geosciences courses. The NSF-funded "GEodetic Tools for Societal Issues" (GETSI) project has recently published a module for field geoscience courses called "Analyzing High Resolution Topography with TLS and SfM" (serc.carleton.edu/getsi/teaching_materials/high-rez-topo/index.html). Structure from motion (SfM) and terrestrial laser scanning (TLS) are two valuable methods for generating high-resolution topographic landscape models. In addition to teaching the basic surveying methods, the module includes several specific applications that are tied to societally important geoscience research questions. The module goals are that students will be able to: 1) design and conduct a complex TLS and/or SfM survey to address a geologic research question; 2) articulate the societal impetus for answering a given research question; and 3) justify why TLS and/or SfM is the appropriate method in some circumstances. The module includes 6 units: Unit 1-TLS Introduction, Unit 1-SfM Introduction, Unit 2 Stratigraphic Section Survey, Unit 3 Fault Scarp Survey, Unit 4 Geomorphic Change Detection Survey, and Unit 5 Summative Assessment. One or both survey methods can be taught. Instructors choose which application/s to use from Units 2-4. Unit 5 Summative Assessment is flexibly written and can be used to assess any of the learned applications or others such as dinosaur tracks or seismic trench photomosaics. Prepared data sets are also provided for courses unable to visit the field. The included SfM learning manuals may also be of interest to researchers seeking to start with SfM; these are "SfM Guide of Instructors and Investigators" and "SfM Data Exploration and Processing Manual (Agisoft)". The module is appropriate for geoscience courses with field components such as field methods, geomorphology, geophysics, tectonics, and structural geology. All GETSI modules are designed and developed by teams of faculty and content experts and undergo rigorous review and classroom testing. GETSI is a collaborative project by UNAVCO (which runs NSF's Geodetic Facility), Indiana University, and Idaho State University. The Science Education Resource Center (SERC) provides assessment and evaluation expertise and webhosting.

VEGAS: A VST Early-type GAlaxy Survey. I. Presentation, wide-field surface photometry, and substructures in NGC 4472

NASA Astrophysics Data System (ADS)

Capaccioli, Massimo; Spavone, Marilena; Grado, Aniello; Iodice, Enrichetta; Limatola, Luca; Napolitano, Nicola R.; Cantiello, Michele; Paolillo, Maurizio; Romanowsky, Aaron J.; Forbes, Duncan A.; Puzia, Thomas H.; Raimondo, Gabriella; Schipani, Pietro

2015-09-01

Context. We present the VST Early-type GAlaxy Survey (VEGAS), which is designed to obtain deep multiband photometry in g,r,i, of about one hundred nearby galaxies down to 27.3, 26.8, and 26 mag/arcsec2 respectively, using the ESO facility VST/OmegaCAM. Aims: The goals of the survey are 1) to map the light distribution up to ten effective radii, re; 2) to trace color gradients and surface brightness fluctuation gradients out to a few re for stellar population characterization; and 3) to obtain a full census of the satellite systems (globular clusters and dwarf galaxies) out to 20% of the galaxy virial radius. The external regions of galaxies retain signatures of the formation and evolution mechanisms that shaped them, and the study of nearby objects enables a detailed analysis of their morphology and interaction features. To clarify the complex variety of formation mechanisms of early-type galaxies (ETGs), wide and deep photometry is the primary observational step, which at the moment has been pursued with only a few dedicated programs. The VEGAS survey has been designated to provide these data for a volume-limited sample with exceptional image quality. Methods: In this commissioning photometric paper we illustrate the capabilities of the survey using g- and i-band VST/OmegaCAM images of the nearby galaxy NGC 4472 and of smaller ETGs in the surrounding field. Results: Our surface brightness profiles reach rather faint levels and agree excellently well with previous literature. Genuine new results concern the detection of an intracluster light tail in NGC 4472 and of various substructures at increasing scales. We have also produced extended (g - i) color profiles. Conclusions: The VST/OmegaCAM data that we acquire in the context of the VEGAS survey provide a detailed view of substructures in the optical emission from extended galaxies, which can be as faint as a hundred times below the sky level. Appendices are available in electronic form at http://www.aanda.org

Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards

DTIC Science & Technology

1992-07-01

Accident Program A combined union/management/ employee program whereby departmental committees work to design health and safety initiatives to attempt to...STANDARDS DING ENGINEERING ATION Survey of Programs Designed To Improve Employee Morale In Seven Major American Shipyards UNITED STATES NAVY David Taylor...4. TITLE AND SUBTITLE Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards 5a. CONTRACT NUMBER 5b. GRANT

Smoking estimates from around the world: data from the first 17 participating countries in the World Mental Health Survey Consortium

PubMed Central

Storr, Carla L; Cheng, Hui; Alonso, Jordi; Angermeyer, Matthias; Bruffaerts, Ronny; de Girolamo, Giovanni; de Graaf, Ron; Gureje, Oye; Karam, Elie G; Kostyuchenko, Stanislav; Lee, Sing; Lepine, Jean-Pierre; Mora, Maria Elena Medina; Myer, Landon; Neumark, Yehuda; Posada-Villa, Jose; Watanabe, Makoto; Wells, J Elisabeth; Kessler, Ronald C; Anthony, James C

2014-01-01

Objective To contribute new multinational findings on basic descriptive features of smoking and cessation, based upon standardised community surveys of adults residing in seven low-income and middle-income countries and 10 higher-income countries from all regions of the world. Methods Data were collected using standardised interviews and community probability sample survey methods conducted as part of the WHO World Mental Health Surveys Initiative. Demographic and socioeconomic correlates of smoking are studied using cross-tabulation and logistic regression approaches. Within-country sample weights were applied with variance estimation appropriate for complex sample survey designs. Results Estimated prevalence of smoking experience (history of ever smoking) and current smoking varied across the countries under study. In all but four countries, one out of every four adults currently smoked. In higher-income countries, estimated proportions of former smokers (those who had quit) were roughly double the corresponding estimates for most low-income and middle-income countries. Characteristics of smokers varied within individual countries, and in relation to the World Bank's low-medium-high gradient of economic development. In stark contrast to a sturdy male-female difference in the uptake of smoking seen in each country, there is no consistent sex-associated pattern in the odds of remaining a smoker (versus quitting). Conclusion The World Mental Health Surveys estimates complement existing global tobacco monitoring efforts. The observed global diversity of associations with smoking and smoking cessation underscore reasons for implementation of the Framework Convention on Tobacco Control provisions and prompt local adaptation of prevention and control interventions. PMID:19965796

Geo-Mechanical Characterization of Carbonate Rock Masses by Means of Laser Scanner Technique

NASA Astrophysics Data System (ADS)

Palma, Biagio; Parise, Mario; Ruocco, Anna

2017-12-01

Knowledge of the geometrical and structural setting of rock masses is crucial to evaluate the stability and to design the most suitable stabilization works. In this work we use the Terrestrial Laser Scanning (TLS) at the site of the Grave of the Castellana Caves, a famous show cave in southern Italy. The Grave is the natural access to the cave system, produced by collapse of the vault, due to upward progression of instabilities in the carbonate rock masses. It is about 55-m high, bell-shaped, with maximum width of 120 m. Aim of the work is the characterization of carbonate rock masses from the structural and geo-mechanical standpoints through the use of innovative survey techniques. TLS survey provides a product consisting of millions of geo-referenced points, to be managed in space, to become a suitable database for the morphological and geological-structural analysis. Studying by means of TLS a rock face, partly inaccessible or located in very complex environments, allows to investigate slopes in their overall areal extent, thus offering advantages both as regards safety of the workers and time needed for the survey. In addition to TLS, the traditional approach was also followed by performing scanlines surveys along the rims of the Grave, following the ISRM recommendations for characterization of discontinuity in rock masses. A quantitative comparison among the data obtained by TLS technique and those deriving from the classical geo-mechanical survey is eventually presented, to discuss potentiality of drawbacks of the different techniques used for surveying the rock masses.

33 CFR 149.697 - What are the requirements for a noise level survey?

Code of Federal Regulations, 2010 CFR

2010-07-01

... noise level survey? 149.697 Section 149.697 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: DESIGN, CONSTRUCTION, AND EQUIPMENT Design and Equipment Noise Limits § 149.697 What are the requirements for a noise level survey? (a) A survey...

33 CFR 149.697 - What are the requirements for a noise level survey?

Code of Federal Regulations, 2011 CFR

2011-07-01

... noise level survey? 149.697 Section 149.697 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: DESIGN, CONSTRUCTION, AND EQUIPMENT Design and Equipment Noise Limits § 149.697 What are the requirements for a noise level survey? (a) A survey...

33 CFR 149.697 - What are the requirements for a noise level survey?

Code of Federal Regulations, 2013 CFR

2013-07-01

... noise level survey? 149.697 Section 149.697 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: DESIGN, CONSTRUCTION, AND EQUIPMENT Design and Equipment Noise Limits § 149.697 What are the requirements for a noise level survey? (a) A survey...

33 CFR 149.697 - What are the requirements for a noise level survey?

Code of Federal Regulations, 2014 CFR

2014-07-01

... noise level survey? 149.697 Section 149.697 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: DESIGN, CONSTRUCTION, AND EQUIPMENT Design and Equipment Noise Limits § 149.697 What are the requirements for a noise level survey? (a) A survey...

33 CFR 149.697 - What are the requirements for a noise level survey?

Code of Federal Regulations, 2012 CFR

2012-07-01

... noise level survey? 149.697 Section 149.697 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: DESIGN, CONSTRUCTION, AND EQUIPMENT Design and Equipment Noise Limits § 149.697 What are the requirements for a noise level survey? (a) A survey...

Documentation for the 2003-04 Schools and Staffing Survey. NCES 2007-337

ERIC Educational Resources Information Center

Tourkin, Steven C.; Warner, Toni; Parmer, Randall; Cole, Cornette; Jackson, Betty; Zukerberg, Andrew; Cox, Shawna; Soderberg, Andrew

2007-01-01

This report serves as the survey documentation for the design and implementation of the 2003-04 Schools and Staffing Survey. Topics covered include the sample design, survey methodology, data collection procedures, data processing, response rates, imputation procedures, weighting and variance estimation, review of the quality of data, the types of…

Design and Validation of the Quantum Mechanics Conceptual Survey

ERIC Educational Resources Information Center

McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

2010-01-01

The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

Developing questionnaires for educational research: AMEE Guide No. 87

PubMed Central

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Developing questionnaires for educational research: AMEE Guide No. 87.

PubMed

Artino, Anthony R; La Rochelle, Jeffrey S; Dezee, Kent J; Gehlbach, Hunter

2014-06-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure.

Repeat participation in annual cross-sectional surveys of drug users and its implications for analysis.

PubMed

Agius, P A; Aitken, C K; Breen, C; Dietze, P M

2018-06-04

We sought to establish the extent of repeat participation in a large annual cross-sectional survey of people who inject drugs and assess its implications for analysis. We used "porn star names" (the name of each participant's first pet followed by the name of the first street in which they lived) to identify repeat participation in three Australian Illicit Drug Reporting System surveys. Over 2013-2015, 2468 porn star names (96.2%) appeared only once, 88 (3.4%) twice, and nine (0.4%) in all 3 years. We measured design effects, based on the between-cluster variability for selected estimates, of 1.01-1.07 for seven key variables. These values indicate that the complex sample is (e.g.) 7% less efficient in estimating prevalence of heroin use (ever) than a simple random sample, and 1% less efficient in estimating number of heroin overdoses (ever). Porn star names are a useful means of tracking research participants longitudinally while maintaining their anonymity. Repeat participation in the Australian Illicit Drug Reporting System is low (less than 5% per annum), meaning point-prevalence and effect estimation without correction for the lack of independence in observations is unlikely to seriously affect population inference.

Achieving optimal welfare for the Nile hippopotamus (Hippopotamus amphibius) in North American zoos and aquariums.

PubMed

Tennant, Kaylin S; Segura, Valerie D; Morris, Megan C; Snyder, Kristen Denninger; Bocian, David; Maloney, Dan; Maple, Terry L

2017-07-29

Compared to other megafauna managed in zoos and aquariums, the current state of welfare for the Nile hippopotamus (Hippopotamus amphibius) is poorly understood. Complex behavior and physiological characteristics make hippos a difficult species to manage. Thus, hippos in managed care are currently at risk for a decreased state of welfare. In an effort to assess and improve conditions for this species, a survey was administered to North American institutions housing Nile hippos. This assessment utilized a multiple-choice format and consisted of questions relating to group structure, behavior, and exhibit design, allowing for the creation of cross-institutional, welfare-based analysis. Responses were gathered from 85.29% of the institutions to which the survey was distributed. Despite recommendations for maintaining groups of at least five individuals (Forthman, 1998), only 34.25% of hippos in North America were housed in groups of three or more. The survey also highlighted that 39.29% of institutions secure their hippos in holding areas overnight, despite their highly active nocturnal propensities. A better understanding of hippo behavior and environmental preferences can be used to inform wellness-oriented management practices to achieve a state of "optimal welfare". Copyright © 2017 Elsevier B.V. All rights reserved.

Geomagnetic referencing in the arctic environment

USGS Publications Warehouse

Podjono, Benny; Beck, Nathan; Buchanan, Andrew; Brink, Jason; Longo, Joseph; Finn, Carol A.; Worthington, E. William

2011-01-01

Geomagnetic referencing is becoming an increasingly attractive alternative to north-seeking gyroscopic surveys to achieve the precise wellbore positioning essential for success in today's complex drilling programs. However, the greater magnitude of variations in the geomagnetic environment at higher latitudes makes the application of geomagnetic referencing in those areas more challenging. Precise, real-time data on those variations from relatively nearby magnetic observatories can be crucial to achieving the required accuracy, but constructing and operating an observatory in these often harsh environments poses a number of significant challenges. Operational since March 2010, the Deadhorse Magnetic Observatory (DED), located in Deadhorse, Alaska, was created through collaboration between the United States Geological Survey (USGS) and a leading oilfield services supply company. DED was designed to produce real-time geomagnetic data at the required level of accuracy, and to do so reliably under the extreme temperatures and harsh weather conditions often experienced in the area. The observatory will serve a number of key scientific communities as well as the oilfield drilling industry, and has already played a vital role in the success of several commercial ventures in the area, providing essential, accurate data while offering significant cost and time savings, compared with traditional surveying techniques.

Geomagnetic referencing in the arctic environment

USGS Publications Warehouse

Poedjono, B.; Beck, N.; Buchanan, A. C.; Brink, J.; Longo, J.; Finn, C.A.; Worthington, E.W.

2011-01-01

Geomagnetic referencing is becoming an increasingly attractive alternative to north-seeking gyroscopic surveys to achieve the precise wellbore positioning essential for success in today's complex drilling programs. However, the greater magnitude of variations in the geomagnetic environment at higher latitudes makes the application of geomagnetic referencing in those areas more challenging. Precise, real-time data on those variations from relatively nearby magnetic observatories can be crucial to achieving the required accuracy, but constructing and operating an observatory in these often harsh environments poses a number of significant challenges. Operational since March 2010, the Deadhorse Magnetic Observatory (DED), located in Deadhorse, Alaska, was created through collaboration between the United States Geological Survey (USGS) and a leading oilfield services supply company. DED was designed to produce real-time geomagnetic data at the required level of accuracy, and to do so reliably under the extreme temperatures and harsh weather conditions often experienced in the area. The observatory will serve a number of key scientific communities as well as the oilfield drilling industry, and has already played a vital role in the success of several commercial ventures in the area, providing essential, accurate data while offering significant cost and time savings, compared with traditional surveying techniques. Copyright 2011, Society of Petroleum Engineers.

Using variance components to estimate power in a hierarchically nested sampling design improving monitoring of larval Devils Hole pupfish

USGS Publications Warehouse

Dzul, Maria C.; Dixon, Philip M.; Quist, Michael C.; Dinsomore, Stephen J.; Bower, Michael R.; Wilson, Kevin P.; Gaines, D. Bailey

2013-01-01

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey's power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.

Using airborne geophysical surveys to improve groundwater resource management models

USGS Publications Warehouse

Abraham, Jared D.; Cannia, James C.; Peterson, Steven M.; Smith, Bruce D.; Minsley, Burke J.; Bedrosian, Paul A.

2010-01-01

Increasingly, groundwater management requires more accurate hydrogeologic frameworks for groundwater models. These complex issues have created the demand for innovative approaches to data collection. In complicated terrains, groundwater modelers benefit from continuous high‐resolution geologic maps and their related hydrogeologic‐parameter estimates. The USGS and its partners have collaborated to use airborne geophysical surveys for near‐continuous coverage of areas of the North Platte River valley in western Nebraska. The survey objectives were to map the aquifers and bedrock topography of the area to help improve the understanding of groundwater‐surface‐water relationships, leading to improved water management decisions. Frequency‐domain heliborne electromagnetic surveys were completed, using a unique survey design to collect resistivity data that can be related to lithologic information to refine groundwater model inputs. To render the geophysical data useful to multidimensional groundwater models, numerical inversion is necessary to convert the measured data into a depth‐dependent subsurface resistivity model. This inverted model, in conjunction with sensitivity analysis, geological ground truth (boreholes and surface geology maps), and geological interpretation, is used to characterize hydrogeologic features. Interpreted two‐ and three‐dimensional data coverage provides the groundwater modeler with a high‐resolution hydrogeologic framework and a quantitative estimate of framework uncertainty. This method of creating hydrogeologic frameworks improved the understanding of flow path orientation by redefining the location of the paleochannels and associated bedrock highs. The improved models reflect actual hydrogeology at a level of accuracy not achievable using previous data sets.

Optimizing patient education of oncology medications: A descriptive survey of pharmacist-provided patient education in Canada.

PubMed

Donald, Gillian; Scott, Samantha; Broadfield, Larry; Harding, Claudia; Meade, Andrea

2017-01-01

Background The incidence of cancer is increasing in Canada due to an aging and growing population. This frequently necessitates chemotherapy, which is a high-risk treatment, often given as a part of a complex regimen with serious side effects. A review of the evidence of pharmacy-provided patient education initiatives targeted to oncology patients revealed that minimal is known about this service. Objective The objective of this study was to determine the different models of patient education of oncology medications delivered by pharmacists to adult oncology patients in a hospital or cancer center in Canada. Methods The study design was a descriptive online survey developed by the investigation team and was distributed to pharmacists who provided patient education to adult oncology patients. The primary outcome of this research project was to describe self-reported pharmacist-provided patient education of oncology medications across Canada. The survey data was analyzed quantitatively with Opinio survey software. Results Sixty-four pharmacists completed the survey. Key findings of the study were that approximately 50% of pharmacists spend up to 25% of their time providing direct patient care and that not all adult oncology patients are receiving education by a pharmacist. Conclusions Pharmacists provide patient education at the first treatment, change in therapy, and on request of another healthcare professional. Most cover administration, side effects, their prevention and management, and drug-interactions. Frequently used teaching methods include structured patient education delivery process, customized teaching for each patient, and repetition of key educational points.

Peer review in design: Understanding the impact of collaboration on the review process and student perception

NASA Astrophysics Data System (ADS)

Mandala, Mahender Arjun

A cornerstone of design and design education is frequent situated feedback. With increasing class sizes, and shrinking financial and human resources, providing rich feedback to students becomes increasingly difficult. In the field of writing, web-based peer review--the process of utilizing equal status learners within a class to provide feedback to each other on their work using networked computing systems--has been shown to be a reliable and valid source of feedback in addition to improving student learning. Designers communicate in myriad ways, using the many languages of design and combining visual and descriptive information. This complex discourse of design intent makes peer reviews by design students ambiguous and often not helpful to the receivers of this feedback. Furthermore, engaging students in the review process itself is often difficult. Teams can complement individual diversity and may assist novice designers collectively resolve complex task. However, teams often incur production losses and may be impacted by individual biases. In the current work, we look at utilizing a collaborative team of reviewers, working collectively and synchronously, in generating web based peer reviews in a sophomore engineering design class. Students participated in a cross-over design, conducting peer reviews as individuals and collaborative teams in parallel sequences. Raters coded the feedback generated on the basis of their appropriateness and accuracy. Self-report surveys and passive observation of teams conducting reviews captured student opinion on the process, its value, and the contrasting experience they had conducting team and individual reviews. We found team reviews generated better quality feedback in comparison to individual reviews. Furthermore, students preferred conducting reviews in teams, finding the process 'fun' and engaging. We observed several learning benefits of using collaboration in reviewing including improved understanding of the assessment criteria, roles, expectations, and increased team reflection. These results provide insight into how to improve the review process for instructors and researchers, and forms a basis for future research work in this area. With respect to facilitating peer review process in design based classrooms, we also present recommendations for creating effective review system design and implementation in classroom supported by research and practical experience.

Using simulation to improve wildlife surveys: Wintering mallards in Mississippi, USA

USGS Publications Warehouse

Pearse, A.T.; Reinecke, K.J.; Dinsmore, S.J.; Kaminski, R.M.

2009-01-01

Wildlife conservation plans generally require reliable data about population abundance and density. Aerial surveys often can provide these data; however, associated costs necessitate designing and conducting surveys efficiently. We developed methods to simulate population distributions of mallards (Anas platyrhynchos) wintering in western Mississippi, USA, by combining bird observations from three previous strip-transect surveys and habitat data from three sets of satellite images representing conditions when surveys were conducted. For each simulated population distribution, we compared 12 primary survey designs and two secondary design options by using coefficients of variation (CV) of population indices as the primary criterion for assessing survey performance. In all, 3 of the 12 primary designs provided the best precision (CV???11.7%) and performed equally well (WR08082E1d.gif diff???0.6%). Features of the designs that provided the largest gains in precision were optimal allocation of sample effort among strata and configuring the study area into five rather than four strata, to more precisely estimate mallard indices in areas of consistently high density. Of the two secondary design options, we found including a second observer to double the size of strip transects increased precision or decreased costs, whereas ratio estimation using auxiliary habitat data from satellite images did not increase precision appreciably. We recommend future surveys of mallard populations in our study area use the strata we developed, optimally allocate samples among strata, employ PPS or EPS sampling, and include two observers when qualified staff are available. More generally, the methods we developed to simulate population distributions from prior survey data provide a cost-effective method to assess performance of alternative wildlife surveys critical to informing management decisions, and could be extended to account for effects of detectability on estimates of true abundance. ?? 2009 CSIRO.

Sourcebook of locations of geophysical surveys in tunnels and horizontal holes, including results of seismic refraction surveys, Rainier Mesa, Aqueduct Mesa, and Area 16, Nevada Test Site

USGS Publications Warehouse

Carroll, R.D.; Kibler, J.E.

1983-01-01

Seismic refraction surveys have been obtained sporadically in tunnels in zeolitized tuff at the Nevada Test Site since the late 1950's. Commencing in 1967 and continuing to date (1982), .extensive measurements of shear- and compressional-wave velocities have been made in five tunnel complexes in Rainier and Aqueduct Mesas and in one tunnel complex in Shoshone Mountain. The results of these surveys to 1980 are compiled in this report. In addition, extensive horizontal drilling was initiated in 1967 in connection with geologic exploration in these tunnel complexes for sites for nuclear weapons tests. Seismic and electrical surveys were conducted in the majority of these holes. The type and location of these tunnel and borehole surveys are indexed in this report. Synthesis of the seismic refraction data indicates a mean compressional-wave velocity near the nuclear device point (WP) of 23 tunnel events of 2,430 m/s (7,970 f/s) with a range of 1,846-2,753 m/s (6,060-9,030 f/s). The mean shear-wave velocity of 17 tunnel events is 1,276 m/s (4,190 f/s) with a range of 1,140-1,392 m/s (3,740-4,570 f/s). Experience indicates that these velocity variations are due chiefly to the extent of fracturing and (or) the presence of partially saturated rock in the region of the survey.

The NSEAD Survey Report 2015-16: Political Reflections from Two Art and Design Educators

ERIC Educational Resources Information Center

Payne, Rachel; Hall, Emese

2018-01-01

In 2015 the (UK) National Society for Education in Art and Design (NSEAD) conducted their biggest and most comprehensive survey to date with art and design educators. Some 1,191 teachers and lecturers employed in early years to further education settings across England and Wales responded to the survey, which aimed to capture how government policy…

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

ERIC Educational Resources Information Center

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

Effect of survey design and catch rate estimation on total catch estimates in Chinook salmon fisheries

USGS Publications Warehouse

McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

2012-01-01

Roving–roving and roving–access creel surveys are the primary techniques used to obtain information on harvest of Chinook salmon Oncorhynchus tshawytscha in Idaho sport fisheries. Once interviews are conducted using roving–roving or roving–access survey designs, mean catch rate can be estimated with the ratio-of-means (ROM) estimator, the mean-of-ratios (MOR) estimator, or the MOR estimator with exclusion of short-duration (≤0.5 h) trips. Our objective was to examine the relative bias and precision of total catch estimates obtained from use of the two survey designs and three catch rate estimators for Idaho Chinook salmon fisheries. Information on angling populations was obtained by direct visual observation of portions of Chinook salmon fisheries in three Idaho river systems over an 18-d period. Based on data from the angling populations, Monte Carlo simulations were performed to evaluate the properties of the catch rate estimators and survey designs. Among the three estimators, the ROM estimator provided the most accurate and precise estimates of mean catch rate and total catch for both roving–roving and roving–access surveys. On average, the root mean square error of simulated total catch estimates was 1.42 times greater and relative bias was 160.13 times greater for roving–roving surveys than for roving–access surveys. Length-of-stay bias and nonstationary catch rates in roving–roving surveys both appeared to affect catch rate and total catch estimates. Our results suggest that use of the ROM estimator in combination with an estimate of angler effort provided the least biased and most precise estimates of total catch for both survey designs. However, roving–access surveys were more accurate than roving–roving surveys for Chinook salmon fisheries in Idaho.

Research on scheduling of robotic transient survey for Antarctic Survey Telescopes (AST3)

NASA Astrophysics Data System (ADS)

Liu, Qiang; Wei, Peng; Shang, Zhao-Hui; Ma, Bin; Hu, Yi

2018-01-01

Antarctic Survey Telescopes (AST3) are designed to be fully robotic telescopes at Dome A, Antarctica, which aim for highly efficient time-domain sky surveys as well as rapid response to special transient events (e.g., gamma-ray bursts, near-Earth asteroids, supernovae, etc.). Unlike traditional observations, a well-designed real-time survey scheduler is needed in order to implement an automatic survey in a very efficient, reliable and flexible way for the unattended telescopes. We present a study of the survey strategy for AST3 and implementation of its survey scheduler, which is also useful for other survey projects.

User evaluations of design complexity: the impact of visual perceptions for effective online health communication.

PubMed

Lazard, Allison; Mackert, Michael

2014-10-01

This paper highlights the influential role of design complexity for users' first impressions of health websites. An experimental design was utilized to investigate whether a website's level of design complexity impacts user evaluations. An online questionnaire measured the hypothesized impact of design complexity on predictors of message effectiveness. Findings reveal that increased design complexity was positively associated with higher levels of perceived design esthetics, attitude toward the website, perceived message comprehensibility, perceived ease of use, perceived usefulness, perceived message quality, perceived informativeness, and perceived visual informativeness. This research gives further evidence that design complexity should be considered an influential variable for health communicators to effectively reach their audiences, as it embodies the critical first step for message evaluation via electronic platforms. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Biosensors with Built-In Biomolecular Logic Gates for Practical Applications

PubMed Central

Lai, Yu-Hsuan; Sun, Sin-Cih; Chuang, Min-Chieh

2014-01-01

Molecular logic gates, designs constructed with biological and chemical molecules, have emerged as an alternative computing approach to silicon-based logic operations. These molecular computers are capable of receiving and integrating multiple stimuli of biochemical significance to generate a definitive output, opening a new research avenue to advanced diagnostics and therapeutics which demand handling of complex factors and precise control. In molecularly gated devices, Boolean logic computations can be activated by specific inputs and accurately processed via bio-recognition, bio-catalysis, and selective chemical reactions. In this review, we survey recent advances of the molecular logic approaches to practical applications of biosensors, including designs constructed with proteins, enzymes, nucleic acids, nanomaterials, and organic compounds, as well as the research avenues for future development of digitally operating “sense and act” schemes that logically process biochemical signals through networked circuits to implement intelligent control systems. PMID:25587423

Using software simulators to enhance the learning of digital logic design for the information technology students

NASA Astrophysics Data System (ADS)

Alsadoon, Abeer; Prasad, P. W. C.; Beg, Azam

2017-09-01

Making the students understand the theoretical concepts of digital logic design concepts is one of the major issues faced by the academics, therefore the teachers have tried different techniques to link the theoretical information to the practical knowledge. Use of software simulations is a technique for learning and practice that can be applied to many different disciplines. Experimentation of different computer hardware components/integrated circuits with the use of the simulators enhances the student learning. The simulators can be rather simplistic or quite complex. This paper reports our evaluation of different simulators available for use in the higher education institutions. We also provide the experience of incorporating some selected tools in teaching introductory courses in computer systems. We justified the effectiveness of incorporating the simulators into the computer system courses by use of student survey and final grade results.

The morphology of streams restored for market and nonmarket purposes: Insights from a mixed natural-social science approach

NASA Astrophysics Data System (ADS)

Doyle, Martin W.; Singh, Jai; Lave, Rebecca; Robertson, Morgan M.

2015-07-01

We use geomorphic surveys to quantify the differences between restored and nonrestored streams, and the difference between streams restored for market purposes (compensatory mitigation) from those restored for nonmarket programs. We also analyze the social and political-economic drivers of the stream restoration and mitigation industry using analysis of policy documents and interviews with key personnel including regulators, mitigation bankers, stream designers, and scientists. Restored streams are typically wider and geomorphically more homogenous than nonrestored streams. Streams restored for the mitigation market are typically headwater streams and part of a large, complex of long restored main channels, and many restored tributaries; streams restored for nonmarket purposes are typically shorter and consist of the main channel only. Interviews reveal that designers integrate many influences including economic and regulatory constraints, but traditions of practice have a large influence as well. Thus, social forces shape the morphology of restored streams.

Health-Related Quality of Life Among US Workers: Variability Across Occupation Groups.

PubMed

Shockey, Taylor M; Zack, Matthew; Sussell, Aaron

2017-08-01

To examine the health-related quality of life among workers in 22 standard occupation groups using data from the 2013-2014 US Behavioral Risk Factor Surveillance System. We examined the health-related quality of life measures of self-rated health, frequent physical distress, frequent mental distress, frequent activity limitation, and frequent overall unhealthy days by occupation group for 155 839 currently employed adults among 17 states. We performed multiple logistic regression analyses that accounted for the Behavioral Risk Factor Surveillance System's complex survey design to obtain prevalence estimates adjusted for potential confounders. Among all occupation groups, the arts, design, entertainment, sports, and media occupation group reported the highest adjusted prevalence of frequent physical distress, frequent mental distress, frequent activity limitation, and frequent overall unhealthy days. The personal care and service occupation group had the highest adjusted prevalence for fair or poor self-rated health. Workers' jobs affect their health-related quality of life.

Internet, Phone, Mail, and Mixed-Mode Surveys: The Tailored Design Method, 4th Edition

ERIC Educational Resources Information Center

Dillman, Don A.; Smyth, Jolene D.; Christian, Lean Melani

2014-01-01

For over two decades, Dillman's classic text on survey design has aided both students and professionals in effectively planning and conducting mail, telephone, and, more recently, Internet surveys. The new edition is thoroughly updated and revised, and covers all aspects of survey research. It features expanded coverage of mobile phones, tablets,…

30 CFR 250.906 - What must I do to obtain approval for the proposed site of my platform?

Code of Federal Regulations, 2011 CFR

2011-07-01

... geological survey relevant to the design and siting of your platform. Your geological survey must assess: (1..., the possibility and effects of seafloor subsidence. (c) Subsurface surveys. Depending upon the design... obtain approval for the proposed site of my platform? (a) Shallow hazards surveys. You must perform a...

30 CFR 250.906 - What must I do to obtain approval for the proposed site of my platform?

Code of Federal Regulations, 2010 CFR

2010-07-01

... seafloor sediments. (b) Geologic surveys. You must perform a geological survey relevant to the design and... seafloor subsidence. (c) Subsurface surveys. Depending upon the design and location of your proposed... proposed site of my platform? (a) Shallow hazards surveys. You must perform a high-resolution or acoustic...

77 FR 5751 - Marine Recreational Fisheries of the United States; National Saltwater Angler Registry and State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-06

... in carrying out surveys, it may be appropriate to utilize survey designs in USVI that are different... State under the qualifying regional survey option of the rule; and clarify and update various provisions... be designated as an Exempted State under the qualifying regional survey option of the rule; and (4...

Employing Model-Based Reasoning in Interdisciplinary Research Teams: Evidence-Based Practices for Integrating Knowledge Across Systems

NASA Astrophysics Data System (ADS)

Pennington, D. D.; Vincent, S.

2017-12-01

The NSF-funded project "Employing Model-Based Reasoning in Socio-Environmental Synthesis (EMBeRS)" has developed a generic model for exchanging knowledge across disciplines that is based on findings from the cognitive, learning, social, and organizational sciences addressing teamwork in complex problem solving situations. Two ten-day summer workshops for PhD students from large, NSF-funded interdisciplinary projects working on a variety of water issues were conducted in 2016 and 2017, testing the model by collecting a variety of data, including surveys, interviews, audio/video recordings, material artifacts and documents, and photographs. This presentation will introduce the EMBeRS model, the design of workshop activities based on the model, and results from surveys and interviews with the participating students. Findings suggest that this approach is very effective for developing a shared, integrated research vision across disciplines, compared with activities typically provided by most large research projects, and that students believe the skills developed in the EMBeRS workshops are unique and highly desireable.

STREAMFINDER - I. A new algorithm for detecting stellar streams

NASA Astrophysics Data System (ADS)

Malhan, Khyati; Ibata, Rodrigo A.

2018-07-01

We have designed a powerful new algorithm to detect stellar streams in an automated and systematic way. The algorithm, which we call the STREAMFINDER, is well suited for finding dynamically cold and thin stream structures that may lie along any simple or complex orbits in Galactic stellar surveys containing any combination of positional and kinematic information. In the present contribution, we introduce the algorithm, lay out the ideas behind it, explain the methodology adopted to detect streams, and detail its workings by running it on a suite of simulations of mock Galactic survey data of similar quality to that expected from the European Space Agency/Gaia mission. We show that our algorithm is able to detect even ultra-faint stream features lying well below previous detection limits. Tests show that our algorithm will be able to detect distant halo stream structures >10° long containing as few as ˜15 members (ΣG ˜ 33.6 mag arcsec-2) in the Gaia data set.

Using multi-disciplinary optimization and numerical simulation on the transiting exoplanet survey satellite

NASA Astrophysics Data System (ADS)

Stoeckel, Gerhard P.; Doyle, Keith B.

2017-08-01

The Transiting Exoplanet Survey Satellite (TESS) is an instrument consisting of four, wide fieldof- view CCD cameras dedicated to the discovery of exoplanets around the brightest stars, and understanding the diversity of planets and planetary systems in our galaxy. Each camera utilizes a seven-element lens assembly with low-power and low-noise CCD electronics. Advanced multivariable optimization and numerical simulation capabilities accommodating arbitrarily complex objective functions have been added to the internally developed Lincoln Laboratory Integrated Modeling and Analysis Software (LLIMAS) and used to assess system performance. Various optical phenomena are accounted for in these analyses including full dn/dT spatial distributions in lenses and charge diffusion in the CCD electronics. These capabilities are utilized to design CCD shims for thermal vacuum chamber testing and flight, and verify comparable performance in both environments across a range of wavelengths, field points and temperature distributions. Additionally, optimizations and simulations are used for model correlation and robustness optimizations.

Use of the internet to study the utility values of the public.

PubMed Central

Lenert, Leslie A.; Sturley, Ann E.

2002-01-01

One of the most difficult tasks in cost-effectiveness analysis is the measurement of quality weights (utilities) for health states. The task is difficult because subjects often lack familiarity with health states they are asked to rate and because utilities measures such as the standard gamble, ask subjects to perform tasks that are complex and far from everyday experience. A large body of research suggests that computer methods can play an important role in explaining health states and measuring utilities. However, administering computer surveys to a "general public" sample, the most relevant sample for cost-effectiveness analysis, is logistically difficult. In this paper, we describe a software system designed to allow the study of general population preferences in a volunteer Internet survey panel. The approach, which relied on over sampling of ethnic groups and older members of the panel, produced a data set with an ethnically, chronologically and geographically diverse group of respondents, but was not successful in replicating the joint distribution of demographic patterns in the population. PMID:12463862

Early Clinical Experiences for Second-Year Student Pharmacists at an Academic Medical Center.

PubMed

McLaughlin, Jacqueline E; Amerine, Lindsey B; Chen, Sheh-Li; Luter, David N; Arnall, Justin; Smith, Shayna; Roth, Mary T; Rodgers, Philip T; Williams, Dennis M; Pinelli, Nicole R

2015-11-25

To examine student outcomes associated with the Student Medication and Reconciliation Team (SMART) program, which was designed to provide second-year student pharmacists at the University of North Carolina (UNC) Eshelman School of Pharmacy direct patient care experience at UNC Medical Center. Twenty-two second-year student pharmacists were randomly selected from volunteers, given program training, and scheduled for three 5-hour evening shifts in 2013-2014. Pre/post surveys and reflection statements were collected from 19 students. Data were analyzed with a mixed methods approach. Survey results revealed an increase in student self-efficacy (p<0.05) and positive perceptions of SMART. Qualitative findings suggest the program provided opportunities for students to develop strategies for practice, promoted an appreciation for the various roles pharmacists play in health care, and fostered an appreciation for the complexity of real-world practice. Early clinical experiences can enhance student learning and development while fostering an appreciation for pharmacy practice.

Survey of Fire Detection Technologies and System Evaluation/Certification Methodologies and Their Suitability for Aircraft Cargo Compartments

NASA Technical Reports Server (NTRS)

Cleary, T.; Grosshandler, W.

1999-01-01

As part of the National Aeronautics and Space Administration (NASA) initiated program on global civil aviation, NIST is assisting Federal Aviation Administration in its research to improve fire detection in aircraft cargo compartments. Aircraft cargo compartment detection certification methods have been reviewed. The Fire Emulator-Detector Evaluator (FE/DE) has been designed to evaluate fire detection technologies such as new sensors, multi-element detectors, and detectors that employ complex algorithms. The FE/DE is a flow tunnel that can reproduce velocity, temperature, smoke, and Combustion gas levels to which a detector might be exposed during a fire. A scientific literature survey and patent search have been conducted relating to existing and emerging fire detection technologies, and the potential use of new fire detection strategies in cargo compartment areas has been assessed. In the near term, improved detector signal processing and multi-sensor detectors based on combinations of smoke measurements, combustion gases and temperature are envisioned as significantly impacting detector system performance.

The Complexities of Family Caregiving at Work: A Mixed-Methods Study.

PubMed

Gaugler, Joseph E; Pestka, Deborah L; Davila, Heather; Sales, Rebecca; Owen, Greg; Baumgartner, Sarah A; Shook, Rocky; Cunningham, Jane; Kenney, Maureen

2018-01-01

The current project examined the impact of caregiving and caregiving-work conflict on employees' well-being. A sequential explanatory mixed-methods design (QUAN→qual) was utilized, and a total of 880 employees from a large health-care plan employer completed an online survey. Forty-five caregivers who completed the survey also participated in one of the five focus groups held 1 to 2 months later. Employed caregivers were significantly ( p < .05) more likely to indicate poorer physical and mental health than noncaregivers; among caregivers ( n = 370), caregiving-work conflict emerged as the most significant predictor of well-being and fully mediated the empirical relationship between burden and well-being. The focus group findings complemented the quantitative results; many of the challenges employed caregivers experience stem from their ability or inability to effectively balance their employment and caregiving roles. The results suggest the need to focus on caregiving-work conflict when constructing new or translating existing evidence-based caregiver interventions.

Post-traumatic Stress Disorder Is Associated With Irritable Bowel Syndrome in African Americans.

PubMed

Iorio, Natalya; Makipour, Kian; Palit, Amiya; Friedenberg, Frank K

2014-10-30

Psychosocial stressors likely play an important role in irritable bowel syndrome (IBS). The association between IBS and post-trau-matic stress disorder (PTSD) in non-minorities has been described. Our aim was to investigate the potential association between IBS and PTSD in an urban African American population. Our institution maintains a longitudinal population-based survey of African Americans (AA). The survey utilizes a complex, stratified sampling design. The study group consisted of adult AA meeting Rome III criteria for IBS of any subtype. The 4-item Primary Care PTSD screener was administered; score of≥ 3 (range, 0-4) was considered positive for PTSD. Depression (Public Health Questionnaire-9 depression) and anxiety (generalized anxiety disorder-7) levels were measured using standardized scales. To assess quality of life, norm-based physical and mental component summary scores from the short-form 36 health survey ver-sion 2 were obtained. Descriptive and inferential statistics were calculated using Complex Sample Module of SPSS after weight-ing of the study sample. Four hundred nineteen subjects included corresponded to a weighted 21,264 (95% CI, 19,777-22,751) individuals. The preva-lence of IBS in our sample of urban AA was 8.2%. In multivariate regression analysis, female gender, age > 40, higher educa-tional attainment and divorce were independently associated with IBS. Those with IBS were considerably more likely to suffer from PTSD (OR, 4.54; 95% CI, 4.07-5.06). PTSD was independently associated with depression, anxiety, harmful drinking and substance abuse. In AA, PTSD is independently associated with IBS. PTSD has a significantly negative impact on physical and mental self-assess-ment of quality of life. Evaluation of minorities presenting with functional gastrointestinal disorders should include screening for PTSD.(J Neurogastroenterol Motil 2014;20:523-530).

NonTuberculous Mycobacteria infection and lung transplantation in cystic fibrosis: a worldwide survey of clinical practice.

PubMed

Tissot, Adrien; Thomas, Matthew F; Corris, Paul A; Brodlie, Malcolm

2018-05-22

In people with cystic fibrosis infection with NonTuberculous Mycobacteria is of increasing prevalence. Mycobacterium abscessus complex is of particular concern and has been associated with adverse clinical outcomes. Optimal treatment usually requires multiple antibiotics for over 12 months. When considering lung transplantation for patients with NonTuberculous Mycobacteria potential benefits must be balanced against the risks of uncontrolled infection post-transplant and significant side-effects associated with treatment. In this survey we assessed current international practice with regard to assessing and listing patients for lung transplantation. We designed a questionnaire enquiring about local practice regarding screening for NonTuberculous Mycobacteria infection, specific contra-indications to transplantation, management and segregation of patients pre- and post-transplant. The survey was sent via e-mail to 37 paediatric and adult lung transplant centres across Europe, North America and Australia. We gathered complete questionnaires from 21 centres (57% response rate). Few centres (29%) have a clear written policy regarding NonTuberculous Mycobacteria. Sixteen (76%) centres require molecular identification of NonTuberculous Mycobacteria species. Only four centres would consider infection with M. abscessus complex in itself a contra-indication for listing, however 76% regard it as a relative contra-indication. Eighty-six percent require treatment pre-transplantation. Finally, only 61% of centres had a clear policy regarding segration of patients pre-transplant and 48% post-transplant. The issue of NonTuberculous Mycobacteria infection in people with cystic fibrosis requiring lung transplantation is well-recognized however current international recommendations are not detailed and there is variation in practice between centres. There is an urgent requirement for high quality clinical data to inform decision-making.

National Survey of Burnout among US General Surgery Residents

PubMed Central

Elmore, Leisha C; Jeffe, Donna B; Jin, Linda; Awad, Michael M; Turnbull, Isaiah R

2017-01-01

Background Burnout is a complex syndrome of emotional distress that can disproportionately affect individuals who work in healthcare professions. Study Design For a national survey of burnout in US general surgery residents, we asked all Accreditation Council for Graduate Medical Education-accredited general surgery program directors to email their general surgery residents an invitation to complete an anonymous, online survey. Burnout was assessed with the Maslach Burnout Inventory; total scores for Emotional Exhaustion (EE), Depersonalization (DP), and Personal Accomplishment (PA) subscales were calculated. Burnout was defined as having a score in the highest tertile for EE or DP or lowest tertile for PA. Chi-square tests and one-way analyses of variance were used to test associations between burnout tertiles for each subscale and various resident and training-program characteristics as appropriate. Results From April–December, 2014, 665 residents actively engaged in clinical training had data for analysis; 69% met the criterion for burnout on at least one subscale. Higher burnout on each subscale was reported by residents planning private practice compared with academic careers. A greater proportion of women than men reported burnout on EE and PA. Higher burnout on EE and DP was associated with greater work hours per week. Having a structured mentoring program was associated with lower burnout on each subscale. Conclusions The high rates of burnout among general surgery residents are concerning given the potential impact of burnout on the quality of patient care. Efforts to identify at-risk populations and to design targeted interventions to mitigate burnout in surgical trainees are warranted. PMID:27238875

Physical and role functioning among persons with HIV: results from a nationally representative survey.

PubMed

Crystal, S; Fleishman, J A; Hays, R D; Shapiro, M F; Bozzette, S A

2000-12-01

Functional limitations of persons living with HIV affect their care needs and ability to perform social roles such as employment. Earlier estimates are outdated, and nationally representative estimates of prevalence and distribution of these limitations have not previously been available. The objectives of this study were to characterize physical and role limitations experienced by adults in care for HIV disease in the United States and to analyze variations by demographic and health characteristics in a multivariate framework. Among 2,836 respondents in the HIV Cost and Services Utilization Survey, we assessed physical functioning with a 9-item scale designed to span a broad continuum of tasks and administered the 2-item ACTG SF-21 role functioning scale. Linearization methods were used to account for the multistage survey design. Limitation in complex roles-working at a job, working around the house, or going to school-was more prevalent than limitation in most specific physical tasks. Among physical tasks, limitation was more prevalent in energy-demanding activities such as climbing stairs (43%) or walking >1 block (26%) than in self-care tasks such as bathing and dressing (14%). Greater limitation was associated with older age, lower educational attainment, more advanced disease, and higher symptom burden. Protease inhibitor treatment was associated with somewhat less physical limitation but no difference in role limitation. Functional status varied widely, suggesting the need for flexible, individualized care system responses. Results identified subgroups whose needs warrant special attention. Symptom intensity, pain, and fatigue were strongly associated with limitation; improved management of these disease manifestations might improve physical and social functioning.

Prospective pilots of routine data capture by paediatricians in clinics and validation of the Disabilities Complexity Scale.

PubMed

Horridge, Karen A; Mcgarry, Kenneth; Williams, Jane; Whitlingum, Gabriel

2016-06-01

To pilot prospective data collection by paediatricians at the point of care across England using a defined terminology set; demonstrate feasibility of data collection and utility of data outputs; and confirm that counting the number of needs per child is valid for quantifying complexity. Paediatricians in 16 hospital and community settings collected and anonymized data. Participants completed a survey regarding the process. Data were analysed using R version 3.1.2. Overall, 8117 needs captured from 1224 consultations were recorded. Sixteen clinicians responded positively about the process and utility of data collection. The sum of needs varied significantly (p<0.01) by level of gross motor function ascertained using the Gross Motor Function Classification System for children with cerebral palsy; epilepsy severity as defined by level of expertise required to manage it; and by severity of intellectual disability. Prospective data collection at the point of clinical care proved possible without disrupting clinics, even for those with the most complex needs, and took the least time when done electronically. Counting the number of needs was easy to do, and quantified complexity in a way that informed clinical care for individuals and related directly to validated scales of functioning. Data outputs could inform more appropriate design and commissioning of quality services. © 2016 Mac Keith Press.

A Novel Information Retrieval Tool to Find Hospital Care Team Members: Development and Usability Study.

PubMed

Morawski, Kyle; Monsen, Craig; Takhar, Sukhjit; Landman, Adam

2018-04-16

Hospital communication among members of a patient's care team is a central part of clinical workflow and consumes a large amount of a health care provider's time. Oftentimes the complexity of hospital care leads to difficulty in finding the appropriate contact, which can lead to inefficiencies and frustration. Squire is a Web-based information retrieval app created to improve the speed and efficiency in reaching the appropriate team member during the care of a hospitalized patient. The objective of the study was to design and develop Squire and to evaluate the usage, usability, and perceived effect of the app on finding the correct contact within a hospital. We used a mixed-methods design using a before-after survey methodology combined with one-on-one interviews to understand the perceived effect of Squire. The study took place at an academic medical center with internal medicine resident physicians. We surveyed residents on demographics, as well as time and efficiency of hospital communication before and after the use of Squire. After using Squire, participants were also asked to evaluate Squire's Net Promoter Score (NPS). A subset of voluntary participants participated in one-on-one interviews and completed the System Usability Scale (SUS). We performed descriptive statistics on participant characteristics, app usage data, and responses to surveys. Survey results were compared before and after Squire adoption using the Wilcoxon rank-sum test and a general linear model. Interview data were analyzed using content analysis with a qualitative description approach to review and categorize feedback from participants. There was a 67.9% (74/109) response rate to the pre-Squire survey and 89.9% (98/109) response rate to the post-Squire survey. At baseline, there was an average of 22.2 (95% CI 18.4-26.0) minutes/day spent searching for the right contact, and this decreased to 16.3 (95% CI 13.9-18.7) minutes/day after Squire was launched (P=.01). There were favorable usability scores, with an average SUS of 84.7, and a marginal NPS of +6.1. Overall, the use of Squire included 22,283 page views, most commonly to contact the admissions office or portable chest x-ray technician. Interviews highlighted common benefits of Squire, including decreased perceived time spent on hold with operators and improvement in connecting with the appropriate contact in specialized, complex departments. Future opportunities were also identified to improve Squire including adding a two-way communication between physician and nursing staff and providing offline access. Squire decreased the perceived time required to find an appropriate contact and had a favorable usability score; however, the NPS was marginal and several opportunities were identified to improve Squire for future use. ©Kyle Morawski, Craig Monsen, Sukhjit Takhar, Adam Landman. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 16.04.2018.

Complexity science and leadership in healthcare.

PubMed

Burns, J P

2001-10-01

The emerging field of complexity science offers an alternative leadership strategy for the chaotic, complex healthcare environment. A survey revealed that healthcare leaders intuitively support principles of complexity science. Leadership that uses complexity principles offers opportunities in the chaotic healthcare environment to focus less on prediction and control and more on fostering relationships and creating conditions in which complex adaptive systems can evolve to produce creative outcomes.

What Can "Social Practice" Theory and "Socio-Cultural" Theory Contribute to Our Understanding of the Processes of Module Design?

ERIC Educational Resources Information Center

Binns, Carole

2015-01-01

This article discusses the data obtained from an online survey of academic staff who are involved in module design and who are employed within one university. The survey was used as a baselining tool to explore the nature of current module design practice within the survey sample. Do academics consistently employ the pragmatic approaches…

Incorporating Uncertainty into Spacecraft Mission and Trajectory Design

NASA Astrophysics Data System (ADS)

Juliana D., Feldhacker

The complex nature of many astrodynamic systems often leads to high computational costs or degraded accuracy in the analysis and design of spacecraft missions, and the incorporation of uncertainty into the trajectory optimization process often becomes intractable. This research applies mathematical modeling techniques to reduce computational cost and improve tractability for design, optimization, uncertainty quantication (UQ) and sensitivity analysis (SA) in astrodynamic systems and develops a method for trajectory optimization under uncertainty (OUU). This thesis demonstrates the use of surrogate regression models and polynomial chaos expansions for the purpose of design and UQ in the complex three-body system. Results are presented for the application of the models to the design of mid-eld rendezvous maneuvers for spacecraft in three-body orbits. The models are shown to provide high accuracy with no a priori knowledge on the sample size required for convergence. Additionally, a method is developed for the direct incorporation of system uncertainties into the design process for the purpose of OUU and robust design; these methods are also applied to the rendezvous problem. It is shown that the models can be used for constrained optimization with orders of magnitude fewer samples than is required for a Monte Carlo approach to the same problem. Finally, this research considers an application for which regression models are not well-suited, namely UQ for the kinetic de ection of potentially hazardous asteroids under the assumptions of real asteroid shape models and uncertainties in the impact trajectory and the surface material properties of the asteroid, which produce a non-smooth system response. An alternate set of models is presented that enables analytic computation of the uncertainties in the imparted momentum from impact. Use of these models for a survey of asteroids allows conclusions to be drawn on the eects of an asteroid's shape on the ability to successfully divert the asteroid via kinetic impactor.

Factors controlling volume errors through 2D gully erosion assessment: guidelines for optimal survey design

NASA Astrophysics Data System (ADS)

Castillo, Carlos; Pérez, Rafael

2017-04-01

The assessment of gully erosion volumes is essential for the quantification of soil losses derived from this relevant degradation process. Traditionally, 2D and 3D approaches has been applied for this purpose (Casalí et al., 2006). Although innovative 3D approaches have recently been proposed for gully volume quantification, a renewed interest can be found in literature regarding the useful information that cross-section analysis still provides in gully erosion research. Moreover, the application of methods based on 2D approaches can be the most cost-effective approach in many situations such as preliminary studies with low accuracy requirements or surveys under time or budget constraints. The main aim of this work is to examine the key factors controlling volume error variability in 2D gully assessment by means of a stochastic experiment involving a Monte Carlo analysis over synthetic gully profiles in order to 1) contribute to a better understanding of the drivers and magnitude of gully erosion 2D-surveys uncertainty and 2) provide guidelines for optimal survey designs. Owing to the stochastic properties of error generation in 2D volume assessment, a statistical approach was followed to generate a large and significant set of gully reach configurations to evaluate quantitatively the influence of the main factors controlling the uncertainty of the volume assessment. For this purpose, a simulation algorithm in Matlab® code was written, involving the following stages: - Generation of synthetic gully area profiles with different degrees of complexity (characterized by the cross-section variability) - Simulation of field measurements characterised by a survey intensity and the precision of the measurement method - Quantification of the volume error uncertainty as a function of the key factors In this communication we will present the relationships between volume error and the studied factors and propose guidelines for 2D field surveys based on the minimal survey densities required to achieve a certain accuracy given the cross-sectional variability of a gully and the measurement method applied. References Casali, J., Loizu, J., Campo, M.A., De Santisteban, L.M., Alvarez-Mozos, J., 2006. Accuracy of methods for field assessment of rill and ephemeral gully erosion. Catena 67, 128-138. doi:10.1016/j.catena.2006.03.005

New York City School Survey 2008-2010: Assessing the Reliability and Validity of a Progress Report Measure. Technical Report

ERIC Educational Resources Information Center

Nathanson, Lori; Cole, Rachel; Kemple, James J.; Lent, Jessica; McCormick, Meghan; Segeritz, Micha

2013-01-01

The Research Alliance for New York City Schools examined Department of Education (DOE) School Survey data from 2008-2010 to better understand the richness and complexities of the information elicited by the Survey from parents, students, and teachers. This report provides background information on the development of the NYC School Surveys during…

Practical Guidelines for Evaluating Sampling Designs in Survey Studies.

ERIC Educational Resources Information Center

Fan, Xitao; Wang, Lin

The popularity of sample surveys in evaluation and research makes it necessary for consumers to tell a good survey from a poor one. Several sources were identified that gave advice on how to evaluate a sample design used in a survey study. The sources are either too limited or too extensive to be useful practically. The purpose of this paper is to…

Developing an Internet-based Survey to Collect Program Cost Data

ERIC Educational Resources Information Center

Caffray, Christine M.; Chatterji, Pinka

2009-01-01

This manuscript describes the development and testing of an Internet-based cost survey that was designed by the authors for the National Assembly on School-Based Health Care (NASBHC) to capture the costs of school-based health programs. The intent of the survey was twofold. First, the survey was designed to collect comprehensive data on costs in a…

Adapting New Space System Designs into Existing Ground Infrastructure

NASA Technical Reports Server (NTRS)

Delgado, Hector N.; McCleskey, Carey M.

2008-01-01

As routine space operations extend beyond earth orbit, the ability for ground infrastructures to take on new launch vehicle systems and a more complex suite of spacecraft and payloads has become a new challenge. The U.S. Vision for Space Exploration and its Constellation Program provides opportunities for our space operations community to meet this challenge. Presently, as new flight and ground systems add to the overall groundbased and space-based capabilities for NASA and its international partners, specific choices are being made as to what to abandon, what to retain, as well as what to build new. The total ground and space-based infrastructure must support a long-term, sustainable operation after it is all constructed, deployed, and activated. This paper addresses key areas of engineering concern during conceptual design, development, and routine operations, with a particular focus on: (1) legacy system reusability, (2) system supportability attributes and operations characteristics, (3) ground systems design trades and criteria, and (4) technology application survey. Each key area explored weighs the merits of reusability of the infrastructure in terms of: engineering analysis methods and techniques; top-level facility, systems, and equipment design criteria; and some suggested methods for making the operational system attributes (the "-ilities") highly visible to the design teams and decisionmakers throughout the design process.

Effects of sample survey design on the accuracy of classification tree models in species distribution models

USGS Publications Warehouse

Edwards, T.C.; Cutler, D.R.; Zimmermann, N.E.; Geiser, L.; Moisen, Gretchen G.

2006-01-01

We evaluated the effects of probabilistic (hereafter DESIGN) and non-probabilistic (PURPOSIVE) sample surveys on resultant classification tree models for predicting the presence of four lichen species in the Pacific Northwest, USA. Models derived from both survey forms were assessed using an independent data set (EVALUATION). Measures of accuracy as gauged by resubstitution rates were similar for each lichen species irrespective of the underlying sample survey form. Cross-validation estimates of prediction accuracies were lower than resubstitution accuracies for all species and both design types, and in all cases were closer to the true prediction accuracies based on the EVALUATION data set. We argue that greater emphasis should be placed on calculating and reporting cross-validation accuracy rates rather than simple resubstitution accuracy rates. Evaluation of the DESIGN and PURPOSIVE tree models on the EVALUATION data set shows significantly lower prediction accuracy for the PURPOSIVE tree models relative to the DESIGN models, indicating that non-probabilistic sample surveys may generate models with limited predictive capability. These differences were consistent across all four lichen species, with 11 of the 12 possible species and sample survey type comparisons having significantly lower accuracy rates. Some differences in accuracy were as large as 50%. The classification tree structures also differed considerably both among and within the modelled species, depending on the sample survey form. Overlap in the predictor variables selected by the DESIGN and PURPOSIVE tree models ranged from only 20% to 38%, indicating the classification trees fit the two evaluated survey forms on different sets of predictor variables. The magnitude of these differences in predictor variables throws doubt on ecological interpretation derived from prediction models based on non-probabilistic sample surveys. ?? 2006 Elsevier B.V. All rights reserved.

Temporally Adaptive Sampling: A Case Study in Rare Species Survey Design with Marbled Salamanders (Ambystoma opacum)

PubMed Central

Charney, Noah D.; Kubel, Jacob E.; Eiseman, Charles S.

2015-01-01

Improving detection rates for elusive species with clumped distributions is often accomplished through adaptive sampling designs. This approach can be extended to include species with temporally variable detection probabilities. By concentrating survey effort in years when the focal species are most abundant or visible, overall detection rates can be improved. This requires either long-term monitoring at a few locations where the species are known to occur or models capable of predicting population trends using climatic and demographic data. For marbled salamanders (Ambystoma opacum) in Massachusetts, we demonstrate that annual variation in detection probability of larvae is regionally correlated. In our data, the difference in survey success between years was far more important than the difference among the three survey methods we employed: diurnal surveys, nocturnal surveys, and dipnet surveys. Based on these data, we simulate future surveys to locate unknown populations under a temporally adaptive sampling framework. In the simulations, when pond dynamics are correlated over the focal region, the temporally adaptive design improved mean survey success by as much as 26% over a non-adaptive sampling design. Employing a temporally adaptive strategy costs very little, is simple, and has the potential to substantially improve the efficient use of scarce conservation funds. PMID:25799224

Geologic map of the Khanneshin carbonatite complex, Helmand Province, Afghanistan, modified from the 1976 original map compilation of V.G. Cheremytsin

USGS Publications Warehouse

Tucker, Robert D.; Peters, Stephen G.; Schulz, Klaus J.; Renaud, Karine M.; Stettner, Will R.; Masonic, Linda M.; Packard, Patricia H.

2011-01-01

This map is a modified version of the Geological map of the Khanneshin carbonatite complex, scale 1:10,000, which was compiled by V.G. Cheremytsin in 1976. Scientists from the U.S. Geological Survey, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original map and also visited the field area in September 2009, August 2010, and February 2011. This modified map, which includes cross sections, illustrates the geologic structure of the Khanneshin carbonatite complex. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and cross sections and includes modifications based on our examination of that map and a related report, and based on observations made during our field visits. (Refer to the References section in the Map PDF for complete citations of the original map and related report.) Elevations on the cross section are derived from the original Soviet topography and may not match the newer topography used on the current map. We have attempted to translate the original Russian terminology and rock classification into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original descriptions. We also use the age designations from the original map. The unit colors on the map and cross sections differ from the colors shown on the original version. The units are colored according to the color and pattern scheme of the Commission for the Geological Map of the World (CGMW) (http://www.ccgm.org).

The NSF ITR Project: Framework for the National Virtual Observatory

NASA Astrophysics Data System (ADS)

Szalay, A. S.; Williams, R. D.; NVO Collaboration

2002-05-01

Technological advances in telescope and instrument design during the last ten years, coupled with the exponential increase in computer and communications capability, have caused a dramatic and irreversible change in the character of astronomical research. Large-scale surveys of the sky from space and ground are being initiated at wavelengths from radio to x-ray, thereby generating vast amounts of high quality irreplaceable data. The potential for scientific discovery afforded by these new surveys is enormous. Entirely new and unexpected scientific results of major significance will emerge from the combined use of the resulting datasets, science that would not be possible from such sets used singly. However, their large size and complexity require tools and structures to discover the complex phenomena encoded within them. We plan to build the NVO framework both through coordinating diverse efforts already in existence and providing a focus for the development of capabilities that do not yet exist. The NVO we envisage will act as an enabling and coordinating entity to foster the development of further tools, protocols, and collaborations necessary to realize the full scientific potential of large astronomical datasets in the coming decade. The NVO must be able to change and respond to the rapidly evolving world of IT technology. In spite of its underlying complex software, the NVO should be no harder to use for the average astronomer, than today's brick-and-mortar observatories and telescopes. Development of these capabilities will require close interaction and collaboration with the information technology community and other disciplines facing similar challenges. We need to ensure that the tools that we need exist or are built, but we do not duplicate efforts, and rely on relevant experience of others.

Orbiting Geophysical Observatory Attitude Control Subsystem Design Survey. NASA/ERC Design Criteria Program, Guidance and Control

NASA Technical Reports Server (NTRS)

Mc Kenna, K. J.; Schmeichel, H.

1968-01-01

This design survey summarizes the history of the Orbiting Geophysical Observatories' (OGO) Attitude Control Subsystem (ACS) from the proposal phase through current flight experience. Problems encountered in design, fabrication, test, and on orbit are discussed. It is hoped that the experiences of the OGO program related here will aid future designers.

Research on Basic Design Education: An International Survey

ERIC Educational Resources Information Center

Boucharenc, C. G.

2006-01-01

This paper reports on the results of a survey and qualitative analysis on the teaching of "Basic Design" in schools of design and architecture located in 22 countries. In the context of this research work, Basic Design means the teaching and learning of design fundamentals that may also be commonly referred to as the Principles of Two- and…

Systematic Assessment of a High-Impact Course Design Institute

ERIC Educational Resources Information Center

Palmer, Michael S.; Streifer, Adriana C.; Williams-Duncan, Stacy

2016-01-01

Herein, we describe an intensive, week-long course design institute (CDI) designed to introduce participants to the scholarly and evidence-driven process of learning-focused course design. Impact of this intervention is demonstrated using a multifaceted approach: (a) post-CDI satisfaction and perception surveys, (b) pre-/post-CDI surveys probing…

47 CFR 1.363 - Introduction of statistical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... case of sample surveys, there shall be a clear description of the survey design, including the... evidence in common carrier hearing proceedings, including but not limited to sample surveys, econometric... description of the experimental design shall be set forth, including a specification of the controlled...

76 FR 12964 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... standalone survey designed to monitor mental and behavioral health indicators in the adult population in... from other surveys designed to measure anxiety, depression, and potential stress-associated physical.... Proposed Project The Division of Behavior Surveillance (DBS) Gulf States Population Survey--New--Public...

75 FR 80056 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-21

... Risk Factor Surveillance System (BRFSS), DBS implemented a standalone survey designed to monitor mental... additional questions taken from standardized scales or from other surveys designed to measure anxiety... Surveillance (DBS) Gulf States Population Survey--New--Public Health Surveillance Program Office (PHSPO...

47 CFR 1.363 - Introduction of statistical data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... case of sample surveys, there shall be a clear description of the survey design, including the... evidence in common carrier hearing proceedings, including but not limited to sample surveys, econometric... description of the experimental design shall be set forth, including a specification of the controlled...

47 CFR 1.363 - Introduction of statistical data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... case of sample surveys, there shall be a clear description of the survey design, including the... evidence in common carrier hearing proceedings, including but not limited to sample surveys, econometric... description of the experimental design shall be set forth, including a specification of the controlled...

47 CFR 1.363 - Introduction of statistical data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... case of sample surveys, there shall be a clear description of the survey design, including the... evidence in common carrier hearing proceedings, including but not limited to sample surveys, econometric... description of the experimental design shall be set forth, including a specification of the controlled...

47 CFR 1.363 - Introduction of statistical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... case of sample surveys, there shall be a clear description of the survey design, including the... evidence in common carrier hearing proceedings, including but not limited to sample surveys, econometric... description of the experimental design shall be set forth, including a specification of the controlled...

A review of fuzzy cognitive maps in medicine: Taxonomy, methods, and applications.

PubMed

Amirkhani, Abdollah; Papageorgiou, Elpiniki I; Mohseni, Akram; Mosavi, Mohammad R

2017-04-01

A high percentage of medical errors, committed because of physician's lack of experience, huge volume of data to be analyzed, and inaccessibility to medical records of previous patients, can be reduced using computer-aided techniques. Therefore, designing more efficient medical decision-support systems (MDSSs) to assist physicians in decision-making is crucially important. Through combining the properties of fuzzy logic and neural networks, fuzzy cognitive maps (FCMs) are among the latest, most efficient, and strongest artificial intelligence techniques for modeling complex systems. This review study is conducted to identify different FCM structures used in MDSS designs. The best structure for each medical application can be introduced by studying the properties of FCM structures. This paper surveys the most important decision- making methods and applications of FCMs in the medical field in recent years. To investigate the efficiency and capability of different FCM models in designing MDSSs, medical applications are categorized into four key areas: decision-making, diagnosis, prediction, and classification. Also, various diagnosis and decision support problems addressed by FCMs in recent years are reviewed with the goal of introducing different types of FCMs and determining their contribution to the improvements made in the fields of medical diagnosis and treatment. In this survey, a general trend for future studies in this field is provided by analyzing various FCM structures used for medical purposes, and the results from each category. Due to the unique specifications of FCMs in integrating human knowledge and experience with computer-aided techniques, they are among practical instruments for MDSS design. In the not too distant future, they will have a significant role in medical sciences. Copyright © 2017 Elsevier B.V. All rights reserved.

A Survey of Cost Estimating Methodologies for Distributed Spacecraft Missions

NASA Technical Reports Server (NTRS)

Foreman, Veronica; Le Moigne, Jacqueline; de Weck, Oliver

2016-01-01

Satellite constellations present unique capabilities and opportunities to Earth orbiting and near-Earth scientific and communications missions, but also present new challenges to cost estimators. An effective and adaptive cost model is essential to successful mission design and implementation, and as Distributed Spacecraft Missions (DSM) become more common, cost estimating tools must become more representative of these types of designs. Existing cost models often focus on a single spacecraft and require extensive design knowledge to produce high fidelity estimates. Previous research has examined the shortcomings of existing cost practices as they pertain to the early stages of mission formulation, for both individual satellites and small satellite constellations. Recommendations have been made for how to improve the cost models for individual satellites one-at-a-time, but much of the complexity in constellation and DSM cost modeling arises from constellation systems level considerations that have not yet been examined. This paper constitutes a survey of the current state-of-the-art in cost estimating techniques with recommendations for improvements to increase the fidelity of future constellation cost estimates. To enable our investigation, we have developed a cost estimating tool for constellation missions. The development of this tool has revealed three high-priority weaknesses within existing parametric cost estimating capabilities as they pertain to DSM architectures: design iteration, integration and test, and mission operations. Within this paper we offer illustrative examples of these discrepancies and make preliminary recommendations for addressing them. DSM and satellite constellation missions are shifting the paradigm of space-based remote sensing, showing promise in the realms of Earth science, planetary observation, and various heliophysical applications. To fully reap the benefits of DSM technology, accurate and relevant cost estimating capabilities must exist; this paper offers insights critical to the future development and implementation of DSM cost estimating tools.

A Survey of Cost Estimating Methodologies for Distributed Spacecraft Missions

NASA Technical Reports Server (NTRS)

Foreman, Veronica L.; Le Moigne, Jacqueline; de Weck, Oliver

2016-01-01

Satellite constellations present unique capabilities and opportunities to Earth orbiting and near-Earth scientific and communications missions, but also present new challenges to cost estimators. An effective and adaptive cost model is essential to successful mission design and implementation, and as Distributed Spacecraft Missions (DSM) become more common, cost estimating tools must become more representative of these types of designs. Existing cost models often focus on a single spacecraft and require extensive design knowledge to produce high fidelity estimates. Previous research has examined the limitations of existing cost practices as they pertain to the early stages of mission formulation, for both individual satellites and small satellite constellations. Recommendations have been made for how to improve the cost models for individual satellites one-at-a-time, but much of the complexity in constellation and DSM cost modeling arises from constellation systems level considerations that have not yet been examined. This paper constitutes a survey of the current state-of-theart in cost estimating techniques with recommendations for improvements to increase the fidelity of future constellation cost estimates. To enable our investigation, we have developed a cost estimating tool for constellation missions. The development of this tool has revealed three high-priority shortcomings within existing parametric cost estimating capabilities as they pertain to DSM architectures: design iteration, integration and test, and mission operations. Within this paper we offer illustrative examples of these discrepancies and make preliminary recommendations for addressing them. DSM and satellite constellation missions are shifting the paradigm of space-based remote sensing, showing promise in the realms of Earth science, planetary observation, and various heliophysical applications. To fully reap the benefits of DSM technology, accurate and relevant cost estimating capabilities must exist; this paper offers insights critical to the future development and implementation of DSM cost estimating tools.

Bilateral Hearing Loss is Associated with Decreased Nonverbal Intelligence in US Children Ages 6 to 16 Years

PubMed Central

Emmett, Susan D.; Francis, Howard W.

2017-01-01

Objectives To evaluate the association between hearing loss and nonverbal intelligence in US children. Study Design The Third National Health and Nutrition Examination Survey (NHANES III) is a cross-sectional survey (1988–1994) that used complex multistage sampling design to produce nationally representative demographic and examination data. Methods A total of 4823 children ages 6–16 years completed audiometric evaluation and cognitive testing during NHANES III. Hearing loss was defined as low frequency pure tone average (PTA)>25 decibels (dB) (0.5,1,2 kHz) or high frequency PTA>25dB (3,4,6,8 kHz) and was designated as unilateral or bilateral. Nonverbal intelligence was measured using the Wechsler Intelligence Scale for Children-Revised block design subtest. Low nonverbal intelligence was defined as a standardized score <4, two standard deviations below the standardized mean of 10. Results Mean nonverbal intelligence scores differed between children with normal hearing (9.59) and children with bilateral (6.87; p=0.02) but not unilateral (9.12; p=0.42) hearing loss. Non-Hispanic black race/ethnicity and family income<$20,000 were associated with 3.92 and 1.67 times higher odds of low nonverbal intelligence, respectively (OR 3.92; p<0.001; OR 1.67; p=0.02). Bilateral hearing loss was independently associated with 5.77 times increased odds of low nonverbal intelligence compared to normal hearing children (OR 5.77; p=0.02). Unilateral hearing loss was not associated with higher odds of low nonverbal intelligence (OR 0.73; p=0.40). Conclusion Bilateral but not unilateral hearing loss is associated with decreased nonverbal intelligence in US children. Longitudinal studies are urgently needed to better understand these associations and their potential impact on future opportunities. PMID:24913183

A survey of industry practices regarding shielding of substations against direct lightning strokes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mousa, A.M.; Wehling, R.J.

1993-01-01

A survey of industry practices regarding shielding of substations against direct lightning strokes is presented and analyzed. The survey is based on responses from 114 companies including consultants and utilities both from within and from outside North America. The survey identifies the shielding design methods in use, the factors affecting the selection of a shielding method, the shielding design criteria and the governing factors, the performance of the different shielding methods and miscellaneous related aspects. The survey revealed a large number (35) of shielding failure incidents; 34 of which occurred in systems designed using either the fixed shielding angle methodmore » or Wagner's 1942 method.« less

The design and development of a complex multifactorial falls assessment intervention for falls prevention: The Prevention of Falls Injury Trial (PreFIT).

PubMed

Bruce, Julie; Ralhan, Shvaita; Sheridan, Ray; Westacott, Katharine; Withers, Emma; Finnegan, Susanne; Davison, John; Martin, Finbarr C; Lamb, Sarah E

2017-06-01

This paper describes the design and development of a complex multifactorial falls prevention (MFFP) intervention for implementation and testing within the framework of a large UK-based falls prevention randomised controlled trial (RCT). A complex intervention was developed for inclusion within the Prevention of Falls Injury Trial (PreFIT), a multicentre pragmatic RCT. PreFIT aims to compare the clinical and cost-effectiveness of three alternative primary care falls prevention interventions (advice, exercise and MFFP), on outcomes of fractures and falls. Community-dwelling adults, aged 70 years and older, were recruited from primary care in the National Health Service (NHS), England. Development of the PreFIT MFFP intervention was informed by the existing evidence base and clinical guidelines for the assessment and management of falls in older adults. After piloting and modification, the final MFFP intervention includes seven falls risk factors: a detailed falls history interview with consideration of 'red flags'; assessment of balance and gait; vision; medication screen; cardiac screen; feet and footwear screen and home environment assessment. This complex intervention has been fully manualised with clear, documented assessment and treatment pathways for each risk factor. Each risk factor is assessed in every trial participant referred for MFFP. Referral for assessment is based upon a screening survey to identify those with a history of falling or balance problems. Intervention delivery can be adapted to the local setting. This complex falls prevention intervention is currently being tested within the framework of a large clinical trial. This paper adheres to TIDieR and CONSORT recommendations for the comprehensive and explicit reporting of trial interventions. Results from the PreFIT study will be published in due course. The effectiveness and cost-effectiveness of the PreFIT MFFP intervention, compared to advice and exercise, on the prevention of falls and fractures, will be reported at the conclusion of the trial.

Defense Infrastructure: Actions Needed to Strengthen Utility Resilience Planning

DTIC Science & Technology

2016-11-01

and design , historical architecture and materials, and overhead; and inflation adjustments. 6We obtained and analyzed records from DOD’s Real...the impacts of those disruptions, and the characteristics of the DOD-owned utility systems, among other things. To inform the design of our survey...managing and operating DOD-owned utility systems. Furthermore, the survey instrument was independently reviewed by a survey design expert within GAO. We

A review of how to conduct a surgical survey using a questionnaire.

PubMed

Hing, C B; Smith, T O; Hooper, L; Song, F; Donell, S T

2011-08-01

Health surveys using questionnaires facilitate the acquisition of information on the knowledge, behaviour, attitudes, perceptions and clinical history of a selected population. Their internal and external validities are threatened by poor design and low response rates. Numerous studies have investigated survey design and administration but care should be taken when generalising findings in different clinical and cultural settings. The current evidence-base suggests that no single mode of survey administration, such as postal, electronic or telephone, is superior to another. Whilst there is no evidence of an ideal response rate relationship to survey validity, response rates can be enhanced by including monetary incentives, providing a time cue, and repeat contact with non-responders. Unlike other modes of experimental data collection, few guidelines currently exist for survey and questionnaire design and response rate should not be considered a direct measure of a survey's quality. Copyright © 2010 Elsevier B.V. All rights reserved.

Land Use Change on Household Farms in the Ecuadorian Amazon: Design and Implementation of an Agent-Based Model

PubMed Central

Mena, Carlos F.; Walsh, Stephen J.; Frizzelle, Brian G.; Xiaozheng, Yao; Malanson, George P.

2010-01-01

This paper describes the design and implementation of an Agent-Based Model (ABM) used to simulate land use change on household farms in the Northern Ecuadorian Amazon (NEA). The ABM simulates decision-making processes at the household level that is examined through a longitudinal, socio-economic and demographic survey that was conducted in 1990 and 1999. Geographic Information Systems (GIS) are used to establish spatial relationships between farms and their environment, while classified Landsat Thematic Mapper (TM) imagery is used to set initial land use/land cover conditions for the spatial simulation, assess from-to land use/land cover change patterns, and describe trajectories of land use change at the farm and landscape levels. Results from prior studies in the NEA provide insights into the key social and ecological variables, describe human behavioral functions, and examine population-environment interactions that are linked to deforestation and agricultural extensification, population migration, and demographic change. Within the architecture of the model, agents are classified as active or passive. The model comprises four modules, i.e., initialization, demography, agriculture, and migration that operate individually, but are linked through key household processes. The main outputs of the model include a spatially-explicit representation of the land use/land cover on survey and non-survey farms and at the landscape level for each annual time-step, as well as simulated socio-economic and demographic characteristics of households and communities. The work describes the design and implementation of the model and how population-environment interactions can be addressed in a frontier setting. The paper contributes to land change science by examining important pattern-process relations, advocating a spatial modeling approach that is capable of synthesizing fundamental relationships at the farm level, and links people and environment in complex ways. PMID:24436501

National Survey of Public School Teachers.

ERIC Educational Resources Information Center

2001

This report presents national survey results of public school teachers' opinions on the relationship between interior design and academic performance. The 1,050 teachers surveyed reveal that they recognize the relationship between interior design and academic achievement and that most teachers see the advantages of classroom carpeting relative to…