Small Engine Component Technology (SECT)

NASA Technical Reports Server (NTRS)

Early, M.; Dawson, R.; Zeiner, P.; Turk, M.; Benn, K.

1986-01-01

A study of small gas turbine engines was conducted to identify high payoff technologies for year-2000 engines and to define companion technology plans. The study addressed engines in the 186 to 746 KW (250 to 1000 shp) or equivalent thrust range for rotorcraft, commuter (turboprop), cruise missile (turbojet), and APU applications. The results show that aggressive advancement of high payoff technologies can produce significant benefits, including reduced SFC, weight, and cost for year-2000 engines. Mission studies for these engines show potential fuel burn reductions of 22 to 71 percent. These engine benefits translate into reductions in rotorcraft and commuter aircraft direct operating costs (DOC) of 7 to 11 percent, and in APU-related DOCs of 37 to 47 percent. The study further shows that cruise missile range can be increased by as much as 200 percent (320 percent with slurry fuels) for a year-2000 missile-turbojet system compared to a current rocket-powered system. The high payoff technologies were identified and the benefits quantified. Based on this, technology plans were defined for each of the four engine applications as recommended guidelines for further NASA research and technology efforts to establish technological readiness for the year 2000.

SU-E-J-136: Investigation Into Robustness of Stopping Power Calculated by DECT and SECT for Proton Therapy Treatment Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, J; Penfold, S; Royal Adelaide Hospital, Adelaide, SA

2015-06-15

Purpose: To investigate the robustness of dual energy CT (DECT) and single energy CT (SECT) proton stopping power calibration techniques and quantify the associated errors when imaging a phantom differing in chemical composition to that used during stopping power calibration. Methods: The CIRS tissue substitute phantom was scanned in a CT-simulator at 90kV and 140kV. This image set was used to generate a DECT proton SPR calibration based on a relationship between effective atomic number and mean excitation energy. A SECT proton SPR calibration based only on Hounsfield units (HUs) was also generated. DECT and SECT scans of a secondmore » phantom of known density and chemical composition were performed. The SPR of the second phantom was calculated with the DECT approach (SPR-DECT),the SECT approach (SPR-SECT) and finally the known density and chemical composition of the phantom (SPR-ref). The DECT and SECT image sets were imported into the Pinnacle{sup 3} research release of proton therapy treatment planning. The difference in dose when exposed to a common pencil beam distribution was investigated. Results: SPR-DECT was found to be in better agreement with SPR-ref than SPR- SECT. The mean difference in SPR for all materials was 0.51% for DECT and 6.89% for SECT. With the exception of Teflon, SPR-DECT was found to agree with SPR-ref to within 1%. Significant differences in calculated dose were found when using the DECT image set or the SECT image set. Conclusion: The DECT calibration technique was found to be more robust to situations in which the physical properties of the test materials differed from the materials used during SPR calibration. Furthermore, it was demonstrated that the DECT and SECT SPR calibration techniques can Result in significantly different calculated dose distributions.« less

Evolution of the Earth Observing System (EOS) Data and Information System (EOSDIS)

NASA Technical Reports Server (NTRS)

Ramapriyan, Hampapuram K.; Behnke, Jeanne; Sofinowski, Edwin; Lowe, Dawn; Esfandiari, Mary Ann

2008-01-01

One of the strategic goals of the U.S. National Aeronautics and Space Administration (NASA) is to "Develop a balanced overall program of science, exploration, and aeronautics consistent with the redirection of the human spaceflight program to focus on exploration". An important sub-goal of this goal is to "Study Earth from space to advance scientific understanding and meet societal needs." NASA meets this subgoal in partnership with other U.S. agencies and international organizations through its Earth science program. A major component of NASA s Earth science program is the Earth Observing System (EOS). The EOS program was started in 1990 with the primary purpose of modeling global climate change. This program consists of a set of space-borne instruments, science teams, and a data system. The instruments are designed to obtain highly accurate, frequent and global measurements of geophysical properties of land, oceans and atmosphere. The science teams are responsible for designing the instruments as well as scientific algorithms to derive information from the instrument measurements. The data system, called the EOS Data and Information System (EOSDIS), produces data products using those algorithms as well as archives and distributes such products. The first of the EOS instruments were launched in November 1997 on the Japanese satellite called the Tropical Rainfall Measuring Mission (TRMM) and the last, on the U.S. satellite Aura, were launched in July 2004. The instrument science teams have been active since the inception of the program in 1990 and have participation from Brazil, Canada, France, Japan, Netherlands, United Kingdom and U.S. The development of EOSDIS was initiated in 1990, and this data system has been serving the user community since 1994. The purpose of this chapter is to discuss the history and evolution of EOSDIS since its beginnings to the present and indicate how it continues to evolve into the future. this chapter is organized as follows. Sect. 7.2 provides a discussion of EOSDIS, its elements and their functions. Sect. 7.3 provides details regarding the move towards more distributed systems for supporting both the core and community needs to be served by NASA Earth science data systems. Sect. 7.4 discusses the use of standards and interfaces and their importance in EOSDIS. Sect. 7.5 provides details about the EOSDIS Evolution Study. Sect. 7.6 presents the implementation of the EOSDIS Evolution plan. Sect. 7.7 briefly outlines the progress that the implementation has made towards the 2015 Vision, followed by a summary in Sect. 7.8.

[Sequence of the ITS region of nuclear ribosomal DNA(nrDNA) in Xinjiang wild Dianthus and its phylogenetic relationship].

PubMed

Zhang, Lu; Cai, You-Ming; Zhuge, Qiang; Zou, Hui-Yu; Huang, Min-Ren

2002-06-01

Xinjiang is a center of distribution and differentiation of genus Dianthus in China, and has a great deal of species resources. The sequences of ITS region (including ITS-1, 5.8S rDNA and ITS-2) of nuclear ribosomal DNA from 8 species of genus Dianthus wildly distributed in Xinjiang were determined by direct sequencing of PCR products. The result showed that the size of the ITS of Dianthus is from 617 to 621 bp, and the length variation is only 4 bp. There are very high homogeneous (97.6%-99.8%) sequences between species, and about 80% homogeneous sequences between genus Dianthus and outgroup. The sequences of ITS in genus Dianthus are relatively conservative. In general, there are more conversion than transition in the variation sites among genus Dianthus. The conversion rates are relatively high, and the ratios of conversion/transition are 1.0-3.0. On the basis of phylogenetic analysis of nucleotide sequences the species of Dianthus in China would be divided into three sections. There is a distant relationship between sect. Barbulatum Williams and sect. Dianthus and between sect. Barbulatum Williams and sect. Fimbriatum Williams, and there is a close relationship between sect. Dianthus and sect. Fimbriatum Williams. From the phylogenetic tree of ITS it was found that the origin of sect. Dianthusis is earlier than that of sect. Fimbriatum Williams and sect. Barbulatum Williams.

Sectional rearrangement of arborescent clades of Croton (Euphorbiaceae) in South America : evolution of arillate seeds and a new species, Croton domatifer

Treesearch

Ricarda Riina; Benjamin van Ee; Alex C. Wiedenhoeft; Alfonso Cardozo; Paul E. Berry

2010-01-01

Most of the arborescent Croton species in the New World were treated by Webster as belonging either to C. sect. Cyclostigma Griseb. or C. sect. Luntia (Neck. ex Raf.) G.L. Webster. The circumscription of C. sect. Cyclostigma has been treated recently. In this paper we focus on C. sect. Luntia, which was subdivided by Webster into two subsections, C. subsect....

Open-Source GIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vatsavai, Raju; Burk, Thomas E; Lime, Steve

2012-01-01

The components making up an Open Source GIS are explained in this chapter. A map server (Sect. 30.1) can broadly be defined as a software platform for dynamically generating spatially referenced digital map products. The University of Minnesota MapServer (UMN Map Server) is one such system. Its basic features are visualization, overlay, and query. Section 30.2 names and explains many of the geospatial open source libraries, such as GDAL and OGR. The other libraries are FDO, JTS, GEOS, JCS, MetaCRS, and GPSBabel. The application examples include derived GIS-software and data format conversions. Quantum GIS, its origin and its applications explainedmore » in detail in Sect. 30.3. The features include a rich GUI, attribute tables, vector symbols, labeling, editing functions, projections, georeferencing, GPS support, analysis, and Web Map Server functionality. Future developments will address mobile applications, 3-D, and multithreading. The origins of PostgreSQL are outlined and PostGIS discussed in detail in Sect. 30.4. It extends PostgreSQL by implementing the Simple Feature standard. Section 30.5 details the most important open source licenses such as the GPL, the LGPL, the MIT License, and the BSD License, as well as the role of the Creative Commons.« less

Modelling radicalization: how small violent fringe sects develop into large indoctrinated societies

PubMed Central

2017-01-01

We model radicalization in a society consisting of two competing religious, ethnic or political groups. Each of the ‘sects’ is divided into moderate and radical factions, with intra-group transitions occurring either spontaneously or through indoctrination. We also include the possibility of one group violently attacking the other. The intra-group transition rates of one group are modelled to explicitly depend on the actions and characteristics of the other, including violent episodes, effectively coupling the dynamics of the two sects. We use a game theoretic framework and assume that radical factions may tune ‘strategic’ parameters to optimize given utility functions aimed at maximizing their ranks while minimizing the damage inflicted by their rivals. Constraints include limited overall resources that must be optimally allocated between indoctrination and external attacks on the other group. Various scenarios are considered, from symmetric sects whose behaviours mirror each other, to totally asymmetric ones where one sect may have a larger population or a superior resource availability. We discuss under what conditions sects preferentially employ indoctrination or violence, and how allowing sects to readjust their strategies allows for small, violent sects to grow into large, indoctrinated communities. PMID:28879010

Chromosome numbers and karyotype evolution in holoparasitic Orobanche (Orobanchaceae) and related genera

USGS Publications Warehouse

Schneeweiss, G.M.; Palomeque, T.; Colwell, A.E.; Weiss-Schneeweiss, H.

2004-01-01

Chromosome numbers and karyotypes of species of Orobanche, Cistanche, and Diphelypaea (Orobanchaceae) were investigated, and 108 chromosome counts of 53 taxa, 19 counted for the first time, are presented with a thorough compilation of previously published data. Additionally, karyotypes of representatives of these genera, including Orobanche sects. Orobanche and Trionychon, are reported. Cistanche (x = 20) has large meta- to submetacentric chromosomes, while those of Diphelypaea (x = 19) are medium-sized submeta-to acrocentrics. Within three analyzed sections of Orobanche, sects. Myzorrhiza (x = 24) and Trionychon (x = 12) possess medium-sized submeta- to acrocentrics, while sect. Orobanche (x = 19) has small, mostly meta- to submetacentric, chromosomes. Polyploidy is unevenly distributed in Orobanche and restricted to a few lineages, e.g., O. sect. Myzorrhiza or Orobanche gracilis and its relatives (sect. Orobanche). The distribution of basic chromosome numbers supports the groups found by molecular phylogenetic analyses: Cistanche has x = 20, the Orobanche-group (Orobanche sect. Orobanche, Diphelypaea) has x = 19, and the Phelipanche-group (Orobanche sects. Gymnocaulis, Myzorrhiza, Trionychon) has x = 12, 24. A model of chromosome number evolution in Orobanche and related genera is presented: from two ancestral base numbers, xh = 5 and xh = 6, independent polyploidizations led to x = 20 (Cistanche) and (after dysploidization) x = 19 (Orobanche-group) and to x = 12 and x = 24 (Phelipanche-group), respectively.

Phylogeny and reclassification of Aconitum subgenus Lycoctonum (Ranunculaceae)

PubMed Central

Hong, Yu; Luo, Yan; Gao, Qi; Ren, Chen; Yuan, Qiong; Yang, Qin-Er

2017-01-01

Phylogenetic analyses were performed using multiple nuclear (ITS and ETS) and chloroplast regions (ndhF-trnL, psbA-trnH, psbD-trnT, and trnT-trnL) to test the monophyly of Aconitum subgen. Lycoctonum (Ranunculaceae) and reconstruct the phylogenetic relationships within the subgenus. The subgenus as currently circumscribed is revealed to be polyphyletic. To achieve its monophyly, sect. Galeata and sect. Fletcherum, both being unispecific and each having a unique array of characters (the latter even having the aberrant base chromosome number of x = 6), must be removed from the subgenus. The subgenus Lycoctonum should thus be redefined to include only two sections, the unispecific sect. Alatospermum and the relatively species-rich sect. Lycoctonum. The section Alatospermum, which is both morphologically and karyologically in the primitive condition, is resolved as the first diverging lineage of the subgenus Lycoctonum clade. The monophyly of sect. Lycoctonum is strongly supported, but all the ten series currently recognized within the section are revealed to be para- or poly-phyletic. Five major clades are recovered within the section. We propose to treat them as five series: ser. Crassiflora, ser. Scaposa, ser. Volubilia, ser. Longicassidata, and ser. Lycoctonia. Thus, a formal reclassification of subgen. Lycoctonum is presented, which involves segregating both sect. Galeata and sect. Fletcherum from the subgenus as two independent subgenera within the genus Aconitum, reinstating one series (ser. Crassiflora) and abolishing six series (ser. Laevia, ser. Longibracteolata, ser. Micrantha, ser. Ranunculoidea, ser. Reclinata, and ser. Umbrosa) within sect. Lycoctonum. The series affiliation of some species within the section is adjusted accordingly. PMID:28141851

Dosimetric comparison of stopping power calibration with dual-energy CT and single-energy CT in proton therapy treatment planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Jiahua; Penfold, Scott N., E-mail: scott.penfold@adelaide.edu.au

Purpose: The accuracy of proton dose calculation is dependent on the ability to correctly characterize patient tissues with medical imaging. The most common method is to correlate computed tomography (CT) numbers obtained via single-energy CT (SECT) with proton stopping power ratio (SPR). CT numbers, however, cannot discriminate between a change in mass density and change in chemical composition of patient tissues. This limitation can have consequences on SPR calibration accuracy. Dual-energy CT (DECT) is receiving increasing interest as an alternative imaging modality for proton therapy treatment planning due to its ability to discriminate between changes in patient density and chemicalmore » composition. In the current work we use a phantom of known composition to demonstrate the dosimetric advantages of proton therapy treatment planning with DECT over SECT. Methods: A phantom of known composition was scanned with a clinical SECT radiotherapy CT-simulator. The phantom was rescanned at a lower X-ray tube potential to generate a complimentary DECT image set. A set of reference materials similar in composition to the phantom was used to perform a stoichiometric calibration of SECT CT number to proton SPRs. The same set of reference materials was used to perform a DECT stoichiometric calibration based on effective atomic number. The known composition of the phantom was used to assess the accuracy of SPR calibration with SECT and DECT. Intensity modulated proton therapy (IMPT) treatment plans were generated with the SECT and DECT image sets to assess the dosimetric effect of the imaging modality. Isodose difference maps and root mean square (RMS) error calculations were used to assess dose calculation accuracy. Results: SPR calculation accuracy was found to be superior, on average, with DECT relative to SECT. Maximum errors of 12.8% and 2.2% were found for SECT and DECT, respectively. Qualitative examination of dose difference maps clearly showed the dosimetric advantages of DECT imaging, compared to SECT imaging for IMPT dose calculation for the case investigated. Quantitatively, the maximum dose calculation error in the SECT plan was 7.8%, compared to a value of 1.4% in the DECT plan. When considering the high dose target region, the root mean square (RMS) error in dose calculation was 2.1% and 0.4% for SECT and DECT, respectively. Conclusions: DECT-based proton treatment planning in a commercial treatment planning system was successfully demonstrated for the first time. DECT is an attractive imaging modality for proton therapy treatment planning owing to its ability to characterize density and chemical composition of patient tissues. SECT and DECT scans of a phantom of known composition have been used to demonstrate the dosimetric advantages obtainable in proton therapy treatment planning with DECT over the current approach based on SECT.« less

Engineering from the Sea: Establishing How Australian Army Engineers Fit into Australia’s Amphibious Concept

DTIC Science & Technology

2011-03-16

as a Geospatial Technician ( Geotech ). Specialist ( 4) TpHQ (1:4) Manning: 1 Offr : 45 Enlisted EODDet (2) Lane metres: 127.0 2xEDDteams Plus: I I...CAPT and Geotech with CT HQ I I I I L CE Sect- Mech (0:10) CE Sect- Mech (0:10) CE Sect - Light (0:8) Support Sect (0:9) M113AS4 Armoured...such as asbestos. An RAE Captain is included in the JTF Headquarters, as well as a Geotech . It is also more than likely that a technically qualified

Phylogenetic Insights into Chinese Rubus (Rosaceae) from Multiple Chloroplast and Nuclear DNAs

PubMed Central

Wang, Yan; Chen, Qing; Chen, Tao; Tang, Haoru; Liu, Lin; Wang, Xiaorong

2016-01-01

Rubus L. is a large and taxonomically complex genus, species of which exhibit apomixis, polyploidy, and frequent hybridization. Most of Chinese Rubus are assigned in two major sections, Idaeobatus and Malachobatus. To explore the phylogenetic relationships within Chinese Rubus, inferences upon three chloroplast DNA (rbcL, rpl20-rps12, and trnG-trnS), nuclear ribosomal ITS, and two low-copy nuclear markers (GBSSI-2 and PEPC) were deduced in 142 Rubus taxa from 17 subsections in 6 sections. nrITS and GBSSI-2 were the most informative among the six DNA regions assessed. Phylogenetic relationships within Rubus were well-resolved by combined nuclear datasets rather than chloroplast markers. The phylogenetic inferences strongly supported that section Idaeobatus was a polyphyletic group with four distant clades. All samples of sect. Malachobatus formed a monophyletic clade, in which R. tsangorum and R. amphidasys of sect. Dalibardastrum, and R. peltatus from subsection Peltati of sect. Idaeobatus were always nested. Rubus pentagonus (2n = 2x = 14) from subsect. Alpestres of sect. Idaeobatus was a sister group to the polyploid sect. Malachobatus, as well as the polytomy of three sect. Cyalctis members. This suggests that some polyploids of Malachobatus might originate from common ancestors, via polyploidization of hybrids between R. pentagonus and sect. Cylactis species. They had experienced species explosion in a short time. Section Dalibardastrum species have potential parental lineages from subsects. Moluccani and Stipulosi of sect. Malachobatus. Based on molecular phylogenies, we also provided recommendations for the taxonomic treatments of four taxa. In addition, our results showed certain incongruence between chloroplast and nuclear markers, which might be due to hybridization and introgression. PMID:27446191

[A new taxonomic system of the genus Murraya (Rutaceae) based on integration of morphology-based taxonomy and chemotaxonomy; and a philological survey on M. exotica in view of the relationship between Okinawa and China].

PubMed

Kinoshita, Takeshi

2014-01-01

This review concerns the taxonomic status of the genus Murraya in tribe Clausenae, subfamily Aurantioideae, family Rutaceae, and presents a new system integrating both morphology-based taxonomy and chemotaxonomy. This genus has been morphologically divided into the sects Murraya and Bergera. This dichotomy is justified by the noticeable difference of secondary metabolites with 3-prenylindoles in Murraya and carbazoles in Bergera. As for other metabolites of genus Murraya, coumarins are found in both sects, but differ clearly in types; 8-prenylcoumarins occur throughout the sect Murraya whereas geranylated furocoumarins are known from some species of the sect Bergera. As far as chemical properties are concerned, sect Bergera is much closer to genus Clausena than sect Murraya, suggesting the dichotomy of genus Murraya to be generic rather than sectional. 8-Prenylcoumarins characterizing sect Murraya play a decisive role in the distinction of M. exotica from M. paniculata that occurs most widely in subtropical and tropical Asia and is well known for morphologic as well as chemical diversity. Though the morphological difference between the two species is slight only in leaves and leaflets, the distinction is well substantiated by the following chemical feature: 7-OMe-8-prenylcoumarins occur in M. exotica whereas 5,7-di-OMe-8-prenylcoumarins in M. paniculata. Sect Murraya has a very close relation to genus Merrillia that is chemically characterized by similar types of 8-prenylcoumarins, and is also related to a certain extent to genus Micromelum. M. exotica is philologically surveyed in view of the delicate relationships between Okinawa, the only habitat of this plant in Japan, and China in order to clarify its historical background.

Sitnikov cyclic configuration of N+1-body problem

NASA Astrophysics Data System (ADS)

Shahbaz Ullah, M.; Hassan, M. R.

2014-12-01

This manuscript deals with the generalisation of all previous works on series solutions and linear stability of equilibrium points of the Sitnikov problem. Following Giacaglia (1967), in Sect. 2 we have derived the equation of motion of the infinitesimal mass moving along the z-axis about which the plane of motion is rotating with unit angular velocity. In Sects. 3, 4 and 5 the series solutions of the Sitnikov problem have been developed by the method of MacMillan, Lindstedt-Poincaré and iteration of Green's function respectively. In Sect. 6 the three series solutions have been compared graphically by putting N=2, 3, 4. In Sect. 7 the coordinates of equilibrium points have been calculated. In Sect. 8 the linear stability of equilibrium points has been examined by the method of Murray and Dermott (Solar System Dynamics, Cambridge University Press, Cambridge, 1999) and it was found that the equilibrium points are stable in Sitnikov problem.

Alternaria section Alternaria: Species, formae speciales or pathotypes?

PubMed Central

Woudenberg, J.H.C.; Seidl, M.F.; Groenewald, J.Z.; de Vries, M.; Stielow, J.B.; Thomma, B.P.H.J.; Crous, P.W.

2015-01-01

The cosmopolitan fungal genus Alternaria consists of multiple saprophytic and pathogenic species. Based on phylogenetic and morphological studies, the genus is currently divided into 26 sections. Alternaria sect. Alternaria contains most of the small-spored Alternaria species with concatenated conidia, including important plant, human and postharvest pathogens. Species within sect. Alternaria have been mostly described based on morphology and / or host-specificity, yet molecular variation between them is minimal. To investigate whether the described morphospecies within sect. Alternaria are supported by molecular data, whole-genome sequencing of nine Alternaria morphospecies supplemented with transcriptome sequencing of 12 Alternaria morphospecies as well as multi-gene sequencing of 168 Alternaria isolates was performed. The assembled genomes ranged in size from 33.3–35.2 Mb within sect. Alternaria and from 32.0–39.1 Mb for all Alternaria genomes. The number of repetitive sequences differed significantly between the different Alternaria genomes; ranging from 1.4–16.5 %. The repeat content within sect. Alternaria was relatively low with only 1.4–2.7 % of repeats. Whole-genome alignments revealed 96.7–98.2 % genome identity between sect. Alternaria isolates, compared to 85.1–89.3 % genome identity for isolates from other sections to the A. alternata reference genome. Similarly, 1.4–2.8 % and 0.8–1.8 % single nucleotide polymorphisms (SNPs) were observed in genomic and transcriptomic sequences, respectively, between isolates from sect. Alternaria, while the percentage of SNPs found in isolates from different sections compared to the A. alternata reference genome was considerably higher; 8.0–10.3 % and 6.1–8.5 %. The topology of a phylogenetic tree based on the whole-genome and transcriptome reads was congruent with multi-gene phylogenies based on commonly used gene regions. Based on the genome and transcriptome data, a set of core proteins was extracted, and primers were designed on two gene regions with a relatively low degree of conservation within sect. Alternaria (96.8 and 97.3 % conservation). Their potential discriminatory power within sect. Alternaria was tested next to nine commonly used gene regions in sect. Alternaria, namely the SSU, LSU, ITS, gapdh, rpb2, tef1, Alt a 1, endoPG and OPA10-2 gene regions. The phylogenies from the two gene regions with a relatively low conservation, KOG1058 and KOG1077, could not distinguish the described morphospecies within sect. Alternaria more effectively than the phylogenies based on the commonly used gene regions for Alternaria. Based on genome and transcriptome comparisons and molecular phylogenies, Alternaria sect. Alternaria consists of only 11 phylogenetic species and one species complex. Thirty-five morphospecies, which cannot be distinguished based on the multi-gene phylogeny, are synonymised under A. alternata. By providing guidelines for the naming and identification of phylogenetic species in Alternaria sect. Alternaria, this manuscript provides a clear and stable species classification in this section. PMID:26951037

A revision of the Dulcamaroid Clade of  Solanum L. (Solanaceae)

PubMed Central

Knapp, Sandra

2013-01-01

Abstract The Dulcamaroid clade of Solanum contains 45 species of mostly vining or weakly scandent species, including the common circumboreal weed Solanum dulcamara L. The group comprises members of the previously recognised infrageneric groupings sect. Andropedas Rusby, sect. Californisolanum A. Child, sect. Dulcamara (Moench) Dumort., sect. Holophylla (G.Don) Walp., sect. Jasminosolanum (Bitter) Seithe, sect.Lysiphellos (Bitter) Seithe, subsect. Nitidum A.Child and sect. Subdulcamara Dunal. These infrageneric groups are not monophyletic as traditionally recognised, and the complex history of the classification of the dulcamaroid solanums is reviewed. Many of the species in the clade are quite variable morphologically; plants are shrubs, herbaceous vines or woody canopy lianas, and habits can vary between these states in a single locality. Variation in leaf shape and pubescence density and type is also extreme and has lead to the description of many minor morphological variants as distinct species. The flowers of members of the group are generally very showy, and several species (e.g., Solanum crispum Ruiz & Pav., Solanum laxum Spreng., Solanum seaforthianum Andrews) are popular ornamental plants that have occasionally escaped from cultivation and become naturalised. The clade is here divided into five morphologically and geographically delimited species groups to facilitate further study. One new species from southern Ecuador, Solanum agnoston S.Knapp sp. nov., is described here. Full descriptions and synonymies (including designations of lectotypes or neotypes), preliminary conservation assessments, illustrations, distribution maps, and an extensive list of localities are provided for all species. PMID:23794937

Alternaria redefined

PubMed Central

Woudenberg, J.H.C.; Groenewald, J.Z.; Binder, M.; Crous, P.W.

2013-01-01

Alternaria is a ubiquitous fungal genus that includes saprobic, endophytic and pathogenic species associated with a wide variety of substrates. In recent years, DNA-based studies revealed multiple non-monophyletic genera within the Alternaria complex, and Alternaria species clades that do not always correlate to species-groups based on morphological characteristics. The Alternaria complex currently comprises nine genera and eight Alternaria sections. The aim of this study was to delineate phylogenetic lineages within Alternaria and allied genera based on nucleotide sequence data of parts of the 18S nrDNA, 28S nrDNA, ITS, GAPDH, RPB2 and TEF1-alpha gene regions. Our data reveal a Pleospora/Stemphylium clade sister to Embellisia annulata, and a well-supported Alternaria clade. The Alternaria clade contains 24 internal clades and six monotypic lineages, the assemblage of which we recognise as Alternaria. This puts the genera Allewia, Brachycladium, Chalastospora, Chmelia, Crivellia, Embellisia, Lewia, Nimbya, Sinomyces, Teretispora, Ulocladium, Undifilum and Ybotromyces in synonymy with Alternaria. In this study, we treat the 24 internal clades in the Alternaria complex as sections, which is a continuation of a recent proposal for the taxonomic treatment of lineages in Alternaria. Embellisia annulata is synonymised with Dendryphiella salina, and together with Dendryphiella arenariae, are placed in the new genus Paradendryphiella. The sexual genera Clathrospora and Comoclathris, which were previously associated with Alternaria, cluster within the Pleosporaceae, outside Alternaria s. str., whereas Alternariaster, a genus formerly seen as part of Alternaria, clusters within the Leptosphaeriaceae. Paradendryphiella is newly described, the generic circumscription of Alternaria is emended, and 32 new combinations and 10 new names are proposed. A further 10 names are resurrected, while descriptions are provided for 16 new Alternaria sections. Taxonomic novelties: New combinations - Alternaria abundans (E.G. Simmons) Woudenb. & Crous, Alternaria alternariae (Cooke) Woudenb. & Crous, Alternaria atra (Preuss) Woudenb. & Crous, Alternaria bornmuelleri (Magnus) Woudenb. & Crous, Alternaria botrytis (Preuss) Woudenb. & Crous, Alternaria caespitosa (de Hoog & C. Rubio) Woudenb. & Crous, Alternaria cantlous (Yong Wang bis & X.G. Zhang) Woudenb. & Crous, Alternaria caricis (E.G. Simmons) Woudenb. & Crous, Alternaria cinerea (Baucom & Creamer) Woudenb. & Crous, Alternaria didymospora (Munt.-Cvetk.) Woudenb. & Crous, Alternaria fulva (Baucom & Creamer) Woudenb. & Crous, Alternaria hyacinthi (de Hoog & P.J. Mull. bis) Woudenb. & Crous, Alternaria indefessa (E.G. Simmons) Woudenberg & Crous, Alternaria leptinellae (E.G. Simmons & C.F. Hill) Woudenb. & Crous, Alternaria lolii (E.G. Simmons & C.F. Hill) Woudenb. & Crous, Alternaria multiformis (E.G. Simmons) Woudenb. & Crous, Alternaria obclavata (Crous & U. Braun) Woudenb. & Crous, Alternaria obovoidea (E.G. Simmons) Woudenb. & Crous, Alternaria oudemansii (E.G. Simmons) Woudenb. & Crous, Alternaria oxytropis (Q. Wang, Nagao & Kakish.) Woudenb. & Crous, Alternaria penicillata (Corda) Woudenb. & Crous, Alternaria planifunda (E.G. Simmons) Woudenb. & Crous, Alternaria proteae (E.G. Simmons) Woudenb. & Crous, Alternaria scirpinfestans (E.G. Simmons & D.A. Johnson) Woudenb. & Crous, Alternaria scirpivora (E.G. Simmons & D.A. Johnson) Woudenb. & Crous, Alternaria septospora (Preuss) Woudenb. & Crous, Alternaria slovaca (Svob.-Pol., L. Chmel & Bojan.) Woudenb. & Crous, Alternaria subcucurbitae (Yong Wang bis & X.G. Zhang) Woudenb. & Crous, Alternaria tellustris (E.G. Simmons) Woudenb. & Crous, Alternaria tumida (E.G. Simmons) Woudenb. & Crous, Paradendryphiella salina (G.K. Sutherl.) Woudenb. & Crous, Paradendryphiella arenariae (Nicot) Woudenb. & Crous. New names - Alternaria aspera Woudenb. & Crous, Alternaria botryospora Woudenb. & Crous, Alternaria brassicae-pekinensis Woudenb. & Crous, Alternaria breviramosa Woudenb. & Crous, Alternaria chlamydosporigena Woudenb. & Crous, Alternaria concatenata Woudenb. & Crous, Alternaria embellisia Woudenb. & Crous, Alternaria heterospora Woudenb. & Crous, Alternaria papavericola Woudenb. & Crous, Alternaria terricola Woudenb. & Crous. Resurrected names - Alternaria cetera E.G. Simmons, Alternaria chartarum Preuss, Alternaria consortialis (Thüm.) J.W. Groves & S. Hughes, Alternaria cucurbitae Letendre & Roum., Alternaria dennisii M.B. Ellis, Alternaria eureka E.G. Simmons, Alternaria gomphrenae Togashi, Alternaria malorum (Ruehle) U. Braun, Crous & Dugan, Alternaria phragmospora Emden, Alternaria scirpicola (Fuckel) Sivan. New sections, all in Alternaria - sect. Chalastospora Woudenb. & Crous, sect. Cheiranthus Woudenb. & Crous, sect. Crivellia Woudenb. & Crous, sect. Dianthicola Woudenb. & Crous, sect. Embellisia Woudenb. & Crous, sect. Embellisioides Woudenb. & Crous, sect. Eureka Woudenb. & Crous, sect. Infectoriae Woudenb. & Crous, sect. Japonicae Woudenb. & Crous, sect. Nimbya Woudenb. & Crous, sect. Phragmosporae Woudenb. & Crous, sect. Pseudoulocladium Woudenb. & Crous, sect. Teretispora Woudenb. & Crous, sect. Ulocladioides Woudenb. & Crous, sect. Ulocladium Woudenb. & Crous, sect. Undifilum Woudenb. & Crous. New genus - Paradendryphiella Woudenb. & Crous. PMID:24014900

Comparison of proton therapy treatment planning for head tumors with a pencil beam algorithm on dual and single energy CT images

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudobivnik, Nace; Dedes, George; Parodi, Katia

2016-01-15

Purpose: Dual energy CT (DECT) has recently been proposed as an improvement over single energy CT (SECT) for stopping power ratio (SPR) estimation for proton therapy treatment planning (TP), thereby potentially reducing range uncertainties. Published literature investigated phantoms. This study aims at performing proton therapy TP on SECT and DECT head images of the same patients and at evaluating whether the reported improved DECT SPR accuracy translates into clinically relevant range shifts in clinical head treatment scenarios. Methods: Two phantoms were scanned at a last generation dual source DECT scanner at 90 and 150 kVp with Sn filtration. The firstmore » phantom (Gammex phantom) was used to calibrate the scanner in terms of SPR while the second served as evaluation (CIRS phantom). DECT images of five head trauma patients were used as surrogate cancer patient images for TP of proton therapy. Pencil beam algorithm based TP was performed on SECT and DECT images and the dose distributions corresponding to the optimized proton plans were calculated using a Monte Carlo (MC) simulation platform using the same patient geometry for both plans obtained from conversion of the 150 kVp images. Range shifts between the MC dose distributions from SECT and DECT plans were assessed using 2D range maps. Results: SPR root mean square errors (RMSEs) for the inserts of the Gammex phantom were 1.9%, 1.8%, and 1.2% for SECT phantom calibration (SECT{sub phantom}), SECT stoichiometric calibration (SECT{sub stoichiometric}), and DECT calibration, respectively. For the CIRS phantom, these were 3.6%, 1.6%, and 1.0%. When investigating patient anatomy, group median range differences of up to −1.4% were observed for head cases when comparing SECT{sub stoichiometric} with DECT. For this calibration the 25th and 75th percentiles varied from −2% to 0% across the five patients. The group median was found to be limited to 0.5% when using SECT{sub phantom} and the 25th and 75th percentiles varied from −1% to 2%. Conclusions: Proton therapy TP using a pencil beam algorithm and DECT images was performed for the first time. Given that the DECT accuracy as evaluated by two phantoms was 1.2% and 1.0% RMSE, it is questionable whether the range differences reported here are significant.« less

Ethical issues in human reproduction: Islamic perspectives.

PubMed

Serour, G I

2013-11-01

Sexual and reproductive rights of women are essential components of human rights. They should never be transferred, renounced or denied for any reason based on race, religion, origin, political opinion or economic conditions. Women have the right to the highest attainable standard of health care for all aspects of their reproductive and sexual health (RSH). The principle of autonomy emphasizes the important role of women in the decision-making. Choices of women in reproduction, after providing evidence based information, should be respected. Risks, benefits and alternatives should be clearly explained before they make their free informed consent. Justice requires that all be treated with equal standard and have equal access to their health needs without discrimination or coercion. When resources are limited there is tension between the principle of justice and utility. Islamic perspectives of bioethics are influenced by primary Sharia namely the Holy Quran, authenticated traditions and saying of the Profit Mohamed (PBUH), Igmaa and Kias (analogy). All the contemporary ethical principles are emphasized in Islamic Shariaa, thus these principles should be observed when providing reproductive and sexual health services for Muslim families or communities. The Family is the basic unit in Islam. Safe motherhood, family planning, and quality reproductive and sexual health information and services and assisted reproductive technology are all encouraged within the frame of marriage. While the Shiaa sect permits egg donation, and surrogacy the Sunni sect forbids a third party contribution to reproduction. Harmful practices in RSH as FGM, child marriage and adolescent pregnancy are prohibited in Islam. Conscientious objection to treatment should not refrain the physician from appropriate referral.

Unconventional States of Matter with Cold Atoms and Dipolar Molecules

DTIC Science & Technology

2014-08-20

ferromagnetic state. For alkaline-earth fermions, the large SU(2N) symmetry greatly enhances quantum spin fluctuations, which give rises to novel...both bosons and fermions, novel quantum magnetism with large spin SU(2N) al- kaline fermions, novel topological states with synthetic gauge fields...presented in Sect. 1.1. The study of novel quantum magnetism with large spin alkaline earth atoms is presented in Sect. 1.2. In Sect. 1.3, we present our

Hieracium sinoaestivum (Asteraceae), a new species from North China

PubMed Central

Sennikov, Alexander N.

2014-01-01

Abstract Hieracium sinoaestivum Sennikov sp. nov. is described as new to science and illustrated. This presumably apomictic species is solely known from two old collections made in a single locality in the Shanxi Province of China. It belongs to the hybridogenous group Hieracium sect. Aestiva (Hieracium sect. Prenanthoidea × Hieracium sect. Umbellata) and is most similar to Hieracium veresczaginii from southern Siberia. The new species occurs at low altitudes in the forest belt of Lülian Mts. and belongs to taiga forest elements. PMID:25197222

Phylogenetic relationships among Lactuca (Asteraceae) species and related genera based on ITS-1 DNA sequences.

PubMed

Koopman, W J; Guetta, E; van de Wiel, C C; Vosman, B; van den Berg, R G

1998-11-01

Internal transcribed spacer (ITS-1) sequences from 97 accessions representing 23 species of Lactuca and related genera were determined and used to evaluate species relationships of Lactuca sensu lato (s.l.). The ITS-1 phylogenies, calculated using PAUP and PHYLIP, correspond better to the classification of Feráková than to other classifications evaluated, although the inclusion of sect. Lactuca subsect. Cyanicae is not supported. Therefore, exclusion of subsect. Cyanicae from Lactuca sensu Feráková is proposed. The amended genus contains the entire gene pool (sensu Harlan and De Wet) of cultivated lettuce (Lactuca sativa). The position of the species in the amended classification corresponds to their position in the lettuce gene pool. In the ITS-1 phylogenies, a clade with L. sativa, L. serriola, L. dregeana, L. altaica, and L. aculeata represents the primary gene pool. L. virosa and L. saligna, branching off closest to this clade, encompass the secondary gene pool. L. virosa is possibly of hybrid origin. The primary and secondary gene pool species are classified in sect. Lactuca subsect. Lactuca. The species L. quercina, L. viminea, L. sibirica, and L. tatarica, branching off next, represent the tertiary gene pool. They are classified in Lactuca sect. Lactucopsis, sect. Phaenixopus, and sect. Mulgedium, respectively. L. perennis and L. tenerrima, classified in sect. Lactuca subsect. Cyanicae, form clades with species from related genera and are not part of the lettuce gene pool.

SH Bell Consent Decree Entered

EPA Pesticide Factsheets

EPA complaint, Consent Decree, against S.H. Bell alleging that emissions of ambient manganese from its facility in East Liverpool, OH & in Ohioville, PA present an imminent and public health or welfare under CAA Sect. 303, CERCLA Sect. 106

Value of monoenergetic dual-energy CT (DECT) for artefact reduction from metallic orthopedic implants in post-mortem studies.

PubMed

Filograna, Laura; Magarelli, Nicola; Leone, Antonio; Guggenberger, Roman; Winklhofer, Sebastian; Thali, Michael John; Bonomo, Lorenzo

2015-09-01

The aim of this ex vivo study was to assess the performance of monoenergetic dual-energy CT (DECT) reconstructions to reduce metal artefacts in bodies with orthopedic devices in comparison with standard single-energy CT (SECT) examinations in forensic imaging. Forensic and clinical impacts of this study are also discussed. Thirty metallic implants in 20 consecutive cadavers with metallic implants underwent both SECT and DECT with a clinically suitable scanning protocol. Extrapolated monoenergetic DECT images at 64, 69, 88, 105, 120, and 130 keV and individually adjusted monoenergy for optimized image quality (OPTkeV) were generated. Image quality of the seven monoenergetic images and of the corresponding SECT image was assessed qualitatively and quantitatively by visual rating and measurements of attenuation changes induced by streak artefact. Qualitative and quantitative analyses showed statistically significant differences between monoenergetic DECT extrapolated images and SECT, with improvements in diagnostic assessment in monoenergetic DECT at higher monoenergies. The mean value of OPTkeV was 137.6 ± 4.9 with a range of 130 to 148 keV. This study demonstrates that monoenergetic DECT images extrapolated at high energy levels significantly reduce metallic artefacts from orthopedic implants and improve image quality compared to SECT examination in forensic imaging.

Genetic variability and mycohost association of Ampelomyces quisqualis isolates inferred from phylogenetic analyses of ITS rDNA and actin gene sequences.

PubMed

Park, Mi-Jeong; Choi, Young-Joon; Hong, Seung-Beom; Shin, Hyeon-Dong

2010-01-01

Ampelomyces quisqualis complex is well known as the most common and widespread hyperparasite of the family Erysiphaceae, the cause of powdery mildew diseases. As commercial biopesticide products it is widely used to control the disease in field and plastic houses. Although genetic diversity within Ampelomyces isolates has been previously recognized, a single name A. quisqualis is still applied to all pycnidial intracellular hyperparasites of powdery mildew fungi. In this study, the phylogenetic relationships among Ampelomyces isolates originating from various powdery mildew fungi in Korea were inferred from Bayesian and maximum parsimony analyses of the sequences of ITS rDNA region and actin gene. In the phylogenetic trees, the Ampelomyces isolates could be divided into four distinct groups with high sequence divergences in both regions. The largest group, Clade 1, mostly accommodated Ampelomyces isolates originating from the mycohost Podosphaera spp. (sect. Sphaerotheca). Clade 2 comprised isolates from several genera of powdery mildews, Golovinomyces, Erysiphe (sect. Erysiphe), Arthrocladiella, and Phyllactinia, and was further divided into two subclades. An isolate obtained from Podosphaera (sect. Sphaerotheca) pannosa was clustered into Clade 3, with those from powdery mildews infecting rosaceous hosts. The mycohosts of Ampelomyces isolates in Clade 4 mostly consisted of species of Erysiphe (sect. Erysiphe, sect. Microsphaera, and sect. Uncinula). The present phylogenetic study demonstrates that Ampelomyces hyperparasite is indeed an assemblage of several distinct lineages rather than a sole species. Although the correlation between Ampelomyces isolates and their mycohosts is not obviously clear, the isolates show not only some degree of host specialization but also adaptation to their mycohosts during the evolution of the hyperparasite. Copyright © 2010 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Dosimetric impact of dual-energy CT tissue segmentation for low-energy prostate brachytherapy: a Monte Carlo study

NASA Astrophysics Data System (ADS)

Remy, Charlotte; Lalonde, Arthur; Béliveau-Nadeau, Dominic; Carrier, Jean-François; Bouchard, Hugo

2018-01-01

The purpose of this study is to evaluate the impact of a novel tissue characterization method using dual-energy over single-energy computed tomography (DECT and SECT) on Monte Carlo (MC) dose calculations for low-dose rate (LDR) prostate brachytherapy performed in a patient like geometry. A virtual patient geometry is created using contours from a real patient pelvis CT scan, where known elemental compositions and varying densities are overwritten in each voxel. A second phantom is made with additional calcifications. Both phantoms are the ground truth with which all results are compared. Simulated CT images are generated from them using attenuation coefficients taken from the XCOM database with a 100 kVp spectrum for SECT and 80 and 140Sn kVp for DECT. Tissue segmentation for Monte Carlo dose calculation is made using a stoichiometric calibration method for the simulated SECT images. For the DECT images, Bayesian eigentissue decomposition is used. A LDR prostate brachytherapy plan is defined with 125I sources and then calculated using the EGSnrc user-code Brachydose for each case. Dose distributions and dose-volume histograms (DVH) are compared to ground truth to assess the accuracy of tissue segmentation. For noiseless images, DECT-based tissue segmentation outperforms the SECT procedure with a root mean square error (RMS) on relative errors on dose distributions respectively of 2.39% versus 7.77%, and provides DVHs closest to the reference DVHs for all tissues. For a medium level of CT noise, Bayesian eigentissue decomposition still performs better on the overall dose calculation as the RMS error is found to be of 7.83% compared to 9.15% for SECT. Both methods give a similar DVH for the prostate while the DECT segmentation remains more accurate for organs at risk and in presence of calcifications, with less than 5% of RMS errors within the calcifications versus up to 154% for SECT. In a patient-like geometry, DECT-based tissue segmentation provides dose distributions with the highest accuracy and the least bias compared to SECT. When imaging noise is considered, benefits of DECT are noticeable if important calcifications are found within the prostate.

SU-G-TeP2-11: Initial Evaluation of a Novel Split-Filter Dual-Energy CT for Use in Radiation Oncology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, J; Huang, J; Szczykutowicz, T

2016-06-15

Purpose: To perform an initial evaluation of a novel split-filter dual-energy CT (DECT) system with the goal of understanding the clinical utility and limitations of the system for radiation therapy. Methods: Several phantoms were imaged using the split-filter DECT technique on the Siemens Edge CT scanner using a range of clinically-relevant doses. The optimum-contrast reconstruction, the mixed reconstruction, and the monoenergetic reconstructions (ranging from 40 keV to 190 keV) were evaluated. Each image was analyzed for CT number accuracy, uniformity, noise, low-contrast visibility (LCV), spatial resolution and geometric distortion. For comparison purposes, all parameters were evaluated on 120 kVp single-energymore » CT (SECT) scans used for treatment planning, as well as, a sequential-scan DECT technique for corresponding doses. Results: For all DECT reconstructions no observable geometric distortion was found. Both the optimal-contrast and mixed images demonstrated slight improvements in LCV and noise when compared to the SECT, and slight reductions in CT number accuracy and spatial resolution. The CT numbers trended as expected for the monoenergetic reconstructions, with CT number accuracy within 50 HU for materials of density <2 g/cm3. Spatial resolution increased with energy, and for monoenergetic reconstructions >70 keV the spatial resolution exceeded that of the SECT. The noise in the monoenergetic reconstructions increased with decreasing energy. Thus, the image uniformity, signal-to-noise ratio and LCV were diminished at lower energies (70 keV). Applying iterative reconstruction techniques to the low-energy images reduced noise and improved LCV. The signal-to-noise ratio was stable for energies >100 keV. Conclusion: The initial commissioning of the novel split-filter DECT technology demonstrated favorable results for clinical implementation. The mixed reconstruction showed potential as a replacement for the treatment planning SECT. The image parameters for the monoenergetic reconstructions varied appropriately with energy. This work provides an initial understanding of the limitations and potential applications for monoenergetic imaging.« less

Design of tubesheet for U-tube heat exchangers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paliwal, D.N.; Saxena, R.M.

1993-02-01

Thorough analysis of two-side integral tubesheet of U-tube heat exchanger is carried out, using Panc's component theory of plates. Effects of solid annular rim and interaction between tubesheet and shell/channel are considered. A design procedure based on foregoing analysis is proposed. Fictive elastic constants due to Osweiller, as well as effective elastic constants due to Slot and O'Donnell, are employed. Deformations, internal forces and primary stress intensities are evaluated in both pitch and diagonal directions. Stress category concept of ASME Sect. VIII Div. 2 is used. Design thickness obtained by this method is compared with the thicknesses calculated, using ASMEmore » Sect. VIII Div. 1, TEMA and BS-5500. This method enables us to calculate stresses in shell and channel in the junction region as well. Present analysis and design procedure thoroughly investigates the tubesheet behavior and leads to a thinner tubesheet. It is concluded that though all the codes based on Gardner's work provide safe and efficient design rules, and lie on firm footing, still there is further scope for reducing the design thickness of tubesheet by about ten percent.« less

Novel species in Talaromyces sect. Islandici isolated from maize and other substrates

USDA-ARS?s Scientific Manuscript database

Talaromyces sect. Islandici was reexamined to determine the prevalence of isolates from maize and the built environment. Using phenotypic analysis, DNA sequencing and phylogenetic and concordance analysis we discovered and described ten new species in section Islandici and one new species in section...

On merging Acer sections Rubra and Hyptiocarpa: Molecular and morphological evidence.

PubMed

Harris, A J; Chen, Yousheng; Olsen, Richard T; Lutz, Sue; Wen, Jun

2017-01-01

In this study, we expanded Acer sect. Rubra Pax to include A. sect. Hyptiocarpa Fang. Traditionally, section Rubra comprises two iconic species, Acer rubrum Linnaeus (red maple) and A. saccharinum Linnaeus (silver maple), of eastern North American forests as well as the rare Japanese montane species, A. pycnanthum K. Koch. Section Hyptiocarpa consists of A. laurinum Hasskarl and A. pinnatinervium Merrill, which occur in subtropical and tropical regions of southwestern China to southeast Asia. Here, we confirm prior phylogenetic results showing the close relationship between sects. Rubra and Hyptiocarpa , and we use scanning electron microscopy to demonstrate that leaves of species within these sections have similar arrangements of cuticular waxes, which account for the silvery color of their abaxial surfaces. We describe that the sections also share labile sex expression; inflorescences that range from compound racemose thyrses, to racemes or umbels and that may have undergone evolutionary reduction; and several features of their fruits, such as seed locules without keels, basal portion of wings straight, acute attachment angle between mericarps, and production of some mericarps that are seedless and partially developed at maturity. Our expansion of sect. Rubra to include sect. Hyptiocarpa better elucidates the biogeographic and evolutionary history of these species. Additionally, we show that A. laurinum and A. pinnatinervium have intergrading morphology and are probably synonymous, but we note that further studies are required to conclude their taxonomic status.

On merging Acer sections Rubra and Hyptiocarpa: Molecular and morphological evidence

PubMed Central

Harris, AJ; Chen, Yousheng; Olsen, Richard T.; Lutz, Sue; Wen, Jun

2017-01-01

Abstract In this study, we expanded Acer sect. Rubra Pax to include A. sect. Hyptiocarpa Fang. Traditionally, section Rubra comprises two iconic species, Acer rubrum Linnaeus (red maple) and A. saccharinum Linnaeus (silver maple), of eastern North American forests as well as the rare Japanese montane species, A. pycnanthum K. Koch. Section Hyptiocarpa consists of A. laurinum Hasskarl and A. pinnatinervium Merrill, which occur in subtropical and tropical regions of southwestern China to southeast Asia. Here, we confirm prior phylogenetic results showing the close relationship between sects. Rubra and Hyptiocarpa, and we use scanning electron microscopy to demonstrate that leaves of species within these sections have similar arrangements of cuticular waxes, which account for the silvery color of their abaxial surfaces. We describe that the sections also share labile sex expression; inflorescences that range from compound racemose thyrses, to racemes or umbels and that may have undergone evolutionary reduction; and several features of their fruits, such as seed locules without keels, basal portion of wings straight, acute attachment angle between mericarps, and production of some mericarps that are seedless and partially developed at maturity. Our expansion of sect. Rubra to include sect. Hyptiocarpa better elucidates the biogeographic and evolutionary history of these species. Additionally, we show that A. laurinum and A. pinnatinervium have intergrading morphology and are probably synonymous, but we note that further studies are required to conclude their taxonomic status. PMID:29033667

Gone with the trees: Phylogeography of Rhodiola sect. Trifida (Crassulaceae) reveals multiple refugia on the Qinghai-Tibetan Plateau.

PubMed

Li, Yuan-Cong; Zhong, Da-Lv; Rao, Guang-Yuan; Wen, Jun; Ren, Yi; Zhang, Jian-Qiang

2018-04-01

Quaternary climatic oscillations have had tremendous effects on current distribution of species. Previous studies unraveled multiple microrefugia on the Qinghai-Tibetan Plateau (QTP) in two woody plants. Still we know little whether herbs growing in forests responded to climatic oscillations similarly. We herein conducted a phylogeographic study on Rhodiola sect. Trifida, an herbaceous group endemic to the QTP, which mainly growing on the forest floors, using plastid and ITS sequences as well as ecological niche modeling. The origin and divergence of major clades of sect. Trifida were in accordance with the last phase of the QTP uplifts. Mismatch distribution analysis indicated a range expansion dated to ca. 135 thousand years ago. A high frequency and an even distribution of private haplotypes in both plastid and ITS data sets throughout the distribution of sect. Trifida were detected. The ecological niche modeling results showed that there were suitable habitats on the QTP platform during the LGM. Our results found that multiple microrefugia existed on the QTP platform, supporting the hypothesis that species with similar geographic distribution and inhabiting the same community had similar responses to the Quaternary climatic oscillations. Furthermore, species delimitations in sect. Trifida need to be tested based on integrative evidence from morphological, ecological and genetic data. Copyright © 2018 Elsevier Inc. All rights reserved.

32 CFR 1645.1 - Purpose; definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ceremonial ritual or discipline of a church, religious sect, or organization established on the basis of a community of faith and belief, doctrines and practices of a religious character; and (ii) Who preaches and... church, a religious sect, or organization of which he is a member, without having been formally ordained...

32 CFR 1645.1 - Purpose; definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ceremonial ritual or discipline of a church, religious sect, or organization established on the basis of a community of faith and belief, doctrines and practices of a religious character; and (ii) Who preaches and... church, a religious sect, or organization of which he is a member, without having been formally ordained...

32 CFR 1645.1 - Purpose; definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ceremonial ritual or discipline of a church, religious sect, or organization established on the basis of a community of faith and belief, doctrines and practices of a religious character; and (ii) Who preaches and... church, a religious sect, or organization of which he is a member, without having been formally ordained...

Mario Bunge's Scientific Realism

ERIC Educational Resources Information Center

Cordero, Alberto

2012-01-01

This paper presents and comments on Mario Bunge's scientific realism. After a brief introduction in Sects. 1 and 2 outlines Bunge's conception of realism. Focusing on the case of quantum mechanics, Sect. 3 explores how his approach plays out for problematic theories. Section 4 comments on Bunge's project against the background of the current…

An Assessment of Artificial Intelligence and Expert Systems Technology for Application to Management of Cockpit Systems.

DTIC Science & Technology

1986-09-01

expert systems will certainly find management applications a fertile field for research and practice." Elam and Henderson (1983) also discuss concepts ...Shortliffe, E.H. (1983). Expert systems research. Science, 220, 261-268, 15 Apr. * Elam, J.J. and Henderson, J.C. (1983). Knowledge engineering concepts for...Symposium on Aerospace and Electronic Systems, Advanced Concepts and Pioneering Perspectives, Dayton, OH, Sect 4, (pp 1-9), Nov 14-15. Dreyfus, H

Comparison of species composition and fumonisin production in Aspergillus section Nigri populations in maize kernels from USA and Italy.

PubMed

Susca, Antonia; Moretti, Antonio; Stea, Gaetano; Villani, Alessandra; Haidukowski, Miriam; Logrieco, Antonio; Munkvold, Gary

2014-10-01

Fumonisin contamination of maize is considered a serious problem in most maize-growing regions of the world, due to the widespread occurrence of these mycotoxins and their association with toxicosis in livestock and humans. Fumonisins are produced primarily by species of Fusarium that are common in maize grain, but also by some species of Aspergillus sect. Nigri, which can also occur on maize kernels as opportunistic pathogens. Understanding the origin of fumonisin contamination in maize is a key component in developing effective management strategies. Although some fungi in Aspergillus sect. Nigri are known to produce fumonisins, little is known about the species which are common in maize and whether they make a measurable contribution to fumonisin contamination of maize grain. In this work, we evaluated populations of Aspergillus sect. Nigri isolated from maize in USA and Italy, focusing on analysis of housekeeping genes, the fum8 gene and in vitro capability of producing fumonisins. DNA sequencing was used to identify Aspergillus strains belonging to sect. Nigri, in order to compare species composition between the two populations, which might influence specific mycotoxicological risks. Combined beta-tubulin/calmodulin sequences were used to genetically characterize 300 strains (199 from Italy and 101 from USA) which grouped into 4 clades: Aspergillus welwitschiae (syn. Aspergillus awamori, 14.7%), Aspergillus tubingensis (37.0%) and Aspergillus niger group 1 (6.7%) and group 2 (41.3%). Only one strain was identified as Aspergillus carbonarius. Species composition differed between the two populations; A. niger predominated among the USA isolates (69%), but comprised a smaller percentage (38%) of Italian isolates. Conversely, A. tubingensis and A. welwitschiae occurred at higher frequencies in the Italian population (42% and 20%, respectively) than in the USA population (27% and 5%). The evaluation of FB2 production on CY20S agar revealed 118 FB2 producing and 84 non-producing strains distributed among the clades: A. welwitschiae, A. niger group 1 and A. niger group 2, confirming the potential of Aspergillus sect. Nigri species to contribute to total fumonisin contamination of maize. A higher percentage of A. niger isolates (72.0%) produced FB2 compared to A. welwitschiae (36.6%). The percentage of FB2-producing A. niger strains was similar in the USA and Italian populations; however, the predominance of A. niger in the USA population suggests a higher potential for fumonisin production. Some strains with fum8 present in the genome did not produce FB2in vitro, confirming the ineffectiveness of fum8 presence as a predictor of FB2 production. Copyright © 2014 Elsevier B.V. All rights reserved.

20 CFR 404.1075 - Members of certain religious groups opposed to insurance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment § 404.1075 Members of certain religious groups opposed to insurance. (a...-employment tax if— (1) You are a member of a recognized religious sect or division of the sect; and (2) You...

20 CFR 404.1075 - Members of certain religious groups opposed to insurance.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment § 404.1075 Members of certain religious groups opposed to insurance. (a...-employment tax if— (1) You are a member of a recognized religious sect or division of the sect; and (2) You...

20 CFR 404.1075 - Members of certain religious groups opposed to insurance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment § 404.1075 Members of certain religious groups opposed to insurance. (a...-employment tax if— (1) You are a member of a recognized religious sect or division of the sect; and (2) You...

20 CFR 404.1075 - Members of certain religious groups opposed to insurance.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment § 404.1075 Members of certain religious groups opposed to insurance. (a...-employment tax if— (1) You are a member of a recognized religious sect or division of the sect; and (2) You...

20 CFR 404.1075 - Members of certain religious groups opposed to insurance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment § 404.1075 Members of certain religious groups opposed to insurance. (a...-employment tax if— (1) You are a member of a recognized religious sect or division of the sect; and (2) You...

[Polymorphism of KPI-A genes from plants of the subgenus Potatoe (sect. Petota, Estolonifera and Lycopersicum) and subgenus Solanum].

PubMed

Krinitsyna, A A; Mel'nikova, N V; Belenikin, M S; Poltronieri, P; Santino, A; Kudriavtseva, A V; Savilova, A M; Speranskaia, A S

2013-01-01

Kunitz-type proteinase inhibitor proteins of group A (KPI-A) are involved in the protection of potato plants from pathogens and pests. Although sequences of large number of the KPI-A genes from different species of cultivated potato (Solanum tuberosum subsp. tuberosum) and a few genes from tomato (Solanum lycopersicum) are known to date, information about the allelic diversity of these genes in other species of the genus Solanum is lacking. In our work, the consensus sequences of the KPI-A genes were established in two species of subgenus Potatoe sect. Petota (Solanum tuberosum subsp. andigenum--5 genes and Solanum stoloniferum--2 genes) and in the subgenus Solanum (Solanum nigrum--5 genes) by amplification, cloning, sequencing and subsequent analysis. The determined sequences of KPI-A genes were 97-100% identical to known sequences of the cultivated potato of sect. Petota (cultivated potato Solanum tuberosum subsp. tuberosum) and sect. Etuberosum (S. palustre). The interspecific variability of these genes did not exceed the intraspecific variability for all studied species except Solanum lycopersicum. The distribution of highly variable and conserved sequences in the mature protein-encoding regions was uniform for all investigated KPI-A genes. However, our attempts to amplify the homologous genes using the same primers and the genomes of Solanum dulcamarum, Solanum lycopersicum and Mandragora officinarum resulted in no product formation. Phylogenetic analysis of KPI-A diversity showed that the sequences of the S. lycopersicum form independent cluster, whereas KPI-A of S. nigrum and species of sect. Etuberosum and sect. Petota are closely related and do not form species-specific subclasters. Although Solanum nigrum is resistant to all known races of economically one of the most important diseases of solanaceous plants oomycete Phytophthora infestans aminoacid sequences encoding by KPI-A genes from its genome have nearly or absolutely no differences to the same from genomes of cultivated potatoes involved by P. infestans.

Microbial Siderophores

NASA Astrophysics Data System (ADS)

Budzikiewicz, Herbert

Iron is of great importance for many metabolic processes since the redox potential between its two valence states Fe2+ and Fe3+ lies within the range of physiological processes. Actually, iron is not a rare element, it is fourth in abundance in the earth crust, but it is not readily available for microorganisms. In the soil ferric oxide hydrates are formed at pH values around seven and the concentration of free Fe3+ is at best 10-17 mol/dm3 while about 10-6 mol/dm3 would be needed. In living organisms iron is usually strongly bound to peptidic substances such as transferrins. To increase the supply of soluble iron microorganisms other than those living in an acidic habitat may circumvent the problem by reduction of Fe3+ to Fe2+ (182), which seems to be of major importance for marine phytoplankton (151); see also amphiphilic marine bacteria (Sect.2.8) and Fe2+ binding ligands (Sect. 7) below. An important alternative is the production of Fe3+ chelating compounds, so-called siderophores. Siderophores are secondary metabolites with masses below 2,000 Da and a high affinity to Fe3+. Small iron-siderophore complexes can enter the cell via unspecific porins, larger ones need a transport system that recognizes the ferri-siderophore at the cell surface. In the cell, iron is released mostly by reduction to the less strongly bound Fe2+ state (137), and the free siderophore is re-exported ("shuttle mechanism"); for a modified shuttle system see pyoverdins (Sect. 2.1) and amonabactins (Sect. 2.7). Rarely the siderophore is degraded in the periplasmatic space as, e.g. enterobactin (Sect. 2.7). Alternatively Fe3+ is transferred at the cell surface from the ferri-siderophore to a trans-membrane transport system ("taxi mechanism"). A probably archaic and unspecific variety of the taxi mechanism comprises the reduction of Fe3+ at the cell surface (see ferrichrome A, Sect. 2.6 (99, 105)). The terms "shuttle" and "taxi mechanism" were coined by Raymond and Carrano (296).

Phylogenetic analyses of Begonia sect. Coelocentrum and allied limestone species of China shed light on the evolution of Sino-Vietnamese karst flora.

PubMed

Chung, Kuo-Fang; Leong, Wai-Chao; Rubite, Rosario Rivera; Repin, Rimi; Kiew, Ruth; Liu, Yan; Peng, Ching-I

2014-12-01

The picturesque limestone karsts across the Sino-Vietnamese border are renowned biodiversity hotspot, distinguished for extremely high endemism of calciphilous plants restricted to caves and cave-like microhabitats that have functioned as biological refugia on the otherwise harsh habitats. To understand evolutionary mechanisms underlying the splendid limestone flora, dated phylogeny is reconstructed for Asian Begonia, a species-rich genus on limestone substrates represented by no less than 60 species in southern China, using DNA sequences of nrITS and chloroplast rpL16 intron. The sampling includes 94 Begonia species encompassing most major Asian clades with a special emphasized on Chinese species. Except for two tuberous deciduous species and a species with upright stems, a majority of Sino-Vietnamese limestone Begonia (SVLB), including sect. Coelocentrum (19 species sampled) and five species of sect. Diploclinium, Leprosae, and Petermannia, are rhizomatous and grouped in a strongly supported and yet internally poorly resolved clade (Clade SVLB), suggesting a single evolutionary origin of the adaptation to limestone substrates by rhizomatous species, subsequent species radiation, and a strong tendency to retain their ancestral niche. Divergence-time estimates indicate a late Miocene diversification of Clade SVLB, coinciding with the onset of the East Asian monsoon and the period of extensive karstification in the area. Based on our phylogenetic study, Begonia sect. Coelocentrum is recircumscribed and expanded to include other members of the Clade SVLB (sect. Diploclinium: B. cavaleriei, B. pulvinifera, and B. wangii; sect. Leprosae: B. cylindrica and B. leprosa; sect. Petermannia: B. sinofloribunda). Because species of Clade SVLB have strong niche conservatism to retain in their ancestral habitats in cave-like microhabitats and Begonia are generally poor dispersers prone to diversify allopatrically, we propose that extensive and continuous karstification of the Sino-Vietnamese limestone region facilitated by the onset of East Asian monsoon since the late Miocene has been the major driving force for species accumulation via geographic isolation in Clade SVLB. Morphologically species of Clade SVLB differ mainly in vegetative traits without apparent adaptive value, suggesting that limestone Begonia radiation is better characterized as non-adaptive, an underappreciated speciation mode crucial for rapid species accumulations in organisms of low vagility and strong niche conservatism.

Deriving concentrations of oxygen and carbon in human tissues using single- and dual-energy CT for ion therapy applications

NASA Astrophysics Data System (ADS)

Landry, Guillaume; Parodi, Katia; Wildberger, Joachim E.; Verhaegen, Frank

2013-08-01

Dedicated methods of in-vivo verification of ion treatment based on the detection of secondary emitted radiation, such as positron-emission-tomography and prompt gamma detection require high accuracy in the assignment of the elemental composition. This especially concerns the content in carbon and oxygen, which are the most abundant elements of human tissue. The standard single-energy computed tomography (SECT) approach to carbon and oxygen concentration determination has been shown to introduce significant discrepancies in the carbon and oxygen content of tissues. We propose a dual-energy CT (DECT)-based approach for carbon and oxygen content assignment and investigate the accuracy gains of the method. SECT and DECT Hounsfield units (HU) were calculated using the stoichiometric calibration procedure for a comprehensive set of human tissues. Fit parameters for the stoichiometric calibration were obtained from phantom scans. Gaussian distributions with standard deviations equal to those derived from phantom scans were subsequently generated for each tissue for several values of the computed tomography dose index (CTDIvol). The assignment of %weight carbon and oxygen (%wC,%wO) was performed based on SECT and DECT. The SECT scheme employed a HU versus %wC,O approach while for DECT we explored a Zeff versus %wC,O approach and a (Zeff, ρe) space approach. The accuracy of each scheme was estimated by calculating the root mean square (RMS) error on %wC,O derived from the input Gaussian distribution of HU for each tissue and also for the noiseless case as a limiting case. The (Zeff, ρe) space approach was also compared to SECT by comparing RMS error for hydrogen and nitrogen (%wH,%wN). Systematic shifts were applied to the tissue HU distributions to assess the robustness of the method against systematic uncertainties in the stoichiometric calibration procedure. In the absence of noise the (Zeff, ρe) space approach showed more accurate %wC,O assignment (largest error of 2%) than the Zeff versus %wC,O and HU versus %wC,O approaches (largest errors of 15% and 30%, respectively). When noise was present, the accuracy of the (Zeff, ρe) space (DECT approach) was decreased but the RMS error over all tissues was lower than the HU versus %wC,O (SECT approach) (5.8%wC versus 7.5%wC at CTDIvol = 20 mGy). The DECT approach showed decreasing RMS error with decreasing image noise (or increasing CTDIvol). At CTDIvol = 80 mGy the RMS error over all tissues was 3.7% for DECT and 6.2% for SECT approaches. However, systematic shifts greater than ±5HU undermined the accuracy gains afforded by DECT at any dose level. DECT provides more accurate %wC,O assignment than SECT when imaging noise and systematic uncertainties in HU values are not considered. The presence of imaging noise degrades the DECT accuracy on %wC,O assignment but it remains superior to SECT. However, DECT was found to be sensitive to systematic shifts of human tissue HU.

32 CFR 1645.6 - Considerations relevant to granting or denying a claim for Class 4-D.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with the ceremonial ritual or discipline of a church, religious sect, or organization established on the basis of a community of faith and belief, doctrines and practices of religious character, to... full-time profession, preaches and teaches the principles of religion of a church, a religious sect, or...

Miconia bullotricha and M. hirtistyla, two new species of Miconia sect. Lima (Miconieae, Melastomataceae) from eastern Cuba

PubMed Central

Majure, Lucas C.; Bécquer, Eldis R.; Judd, Walter S.

2014-01-01

Abstract We describe two new species in Miconia sect. Lima, Miconia bullotricha Bécquer & Majure and Miconia hirtistyla Majure & Judd, from eastern, Cuba. We also provide illustrations and distribution maps for the two species, as well as a key to members of the Lima clade on Cuba. PMID:24526849

The Sino-Indian Border Dispute: India’s Current Options

DTIC Science & Technology

1993-06-04

Thus came into being the ’Red Hat’ sect of Lamaism which enjoyed the ruler’s patronage. This, however, had adverse affects and the Red Hats slowly...north, seized power and established the ’Yellow Hat’ sect of Lamaism which purported to follow a refined doctrine. The fourth reincarnation of Tsong Khapa

Whose Children Are They? A Transnational Minority Religious Sect and Schools as Sites of Conflict in Canada, 1890-1922

ERIC Educational Resources Information Center

Sneath, Robyn

2017-01-01

In 1874, 6000 Old Colony Mennonites, an ethno-religious minority sect, immigrated to the Canadian prairies from Russia, after negotiating a charter of privileges with the federal government. Chief among these freedoms was the right to educate their children without government interference. Between 1890 and 1922, tensions mounted between the…

Molecular Phylogeny, Recent Radiation and Evolution of Gross Morphology of the Rhubarb genus Rheum (Polygonaceae) Inferred from Chloroplast DNA trnL-F Sequences

PubMed Central

WANG, AILAN; YANG, MEIHUA; LIU, JIANQUAN

2005-01-01

• Background and Aims Rheum, a highly diversified genus with about 60 species, is mainly confined to the mountainous and desert regions of the Qinghai–Tibetan plateau and adjacent areas. This genus represents a good example of the extensive diversification of the temperate genera in the Qinghai–Tibetan plateau, in which the forces to drive diversification remain unknown. To date, the infrageneric classification of Rheum has been mainly based on morphological characters. However, it may have been subject to convergent evolution under habitat pressure, and the systematic position of some sections are unclear, especially Sect. Globulosa, which has globular inflorescences, and Sect. Nobilia, which has semi-translucent bracts. Recent palynological research has found substantial contradictions between exine patterns and the current classification of Rheum. Two specific objectives of this research were (1) to evaluate possible relationships of some ambiguous sections with a unique morphology, and (2) to examine possible occurrence of the radiative speciation with low genetic divergence across the total genus and the correlation between the extensive diversification time of Rheum and past geographical events, especially the recent large-scale uplifts of the Qinghai–Tibetan Plateau. • Methods The chloroplast DNA trnL-F region of 29 individuals representing 26 species of Rheum, belonging to seven out of eight sections, was sequenced and compared. The phylogenetic relationships were further constructed based on the sequences obtained. • Key Results Despite the highly diversified morphology, the genetic variation in this DNA fragment is relatively low. The molecular phylogeny is highly inconsistent with gross morphology, pollen exine patterns and traditional classifications, except for identifying all samples of Sect. Palmata, three species of Sect. Spiciformia and a few species of Sect. Rheum as corresponding monophyletic groups. The monotypic Sect. Globulosa showed a tentative position within the clade comprising five species of Sect. Rheum. All of the analyses revealed the paraphyly of R. nobile and R. alexandrae, the only two species of Sect. Nobilia circumscribed by the possession of large bracts. The crude calibration of lineages based on trnL-F sequence differentiation implied an extensive diversification of Rheum within approx. 7 million years. • Conclusions Based on these results, it is suggested that the rich geological and ecological diversity caused by the recent large-scale uplifts of the Qinghai–Tibetan Plateau since the late Tertiary, coupled with the oscillating climate of the Quaternary stage, might have promoted rapid speciation in small and isolated populations, as well as allowing the fixation of unique or rare morphological characters in Rheum. Such a rapid radiation, combined with introgressive hybridization and reticulate evolution, may have caused the transfer of cpDNA haplotypes between morphologically dissimilar species, and might account for the inconsistency between morphological classification and molecular phylogeny reported here. PMID:15994840

Emerald Field, Natrona County, Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swirczynski, R.P.

1978-01-01

The Emerald Field is located on the W.-central Casper Arch in Sect. Nos. 7, 8, 9, and 18, T37N, R84W, Natrona County, Wyo. The Notches Field located in Sect. Nos. 3 and 10, T37N, R85W is 5 miles west of the Emerald Field. Both the Emerald and Notches Field produce oil from structural traps in the Tensleep formation (Pennsylvanian).

Ultra-Dense Quantum Communication Using Integrated Photonic Architecture: Second Quarterly Report

DTIC Science & Technology

2011-04-30

photon ( bpp ), while guaranteeing absolute security at high communication rates of 1 Gbps or more. The following sections detail the progress towards...security for 400-ps period in QKD protocol. In Year 3, we target 0.1-0.2 dB/cm to achieve 5 ns delay and 8 bpp . Total loss in the Franson interferometer is...and spatial degrees of freedom. This component is described in more detail in Sect. III A. 5. Multiplexing is used to scale up data rate beyond 10 bpp

A High Performance Computing Approach to the Simulation of Fluid Solid Interaction Problems with Rigid and Flexible Components (Open Access Author’s Manuscript)

DTIC Science & Technology

2014-08-01

searchrequired for SPH are described in Sect. 3. Section 4 contains aperformance analysis of the algorithm using Kepler -type GPUcards. 2. Numerical...generation of Kepler architecture, code nameGK104, which is also implemented in Tesla K10. The Keplerarchitecture relies on a Graphics Processing Cluster (GPC...lat-ter is 512 KB large and has a bandwidth of 512 B/clockcycle. Constant memory (read only per grid): 48 KB per Kepler SM.Used to hold constants

Accuracy of Liver Fat Quantification With Advanced CT, MRI, and Ultrasound Techniques: Prospective Comparison With MR Spectroscopy.

PubMed

Kramer, Harald; Pickhardt, Perry J; Kliewer, Mark A; Hernando, Diego; Chen, Guang-Hong; Zagzebski, James A; Reeder, Scott B

2017-01-01

The purpose of this study was to prospectively evaluate the accuracy of proton-density fat-fraction, single- and dual-energy CT (SECT and DECT), gray-scale ultrasound (US), and US shear-wave elastography (US-SWE) in the quantification of hepatic steatosis with MR spectroscopy (MRS) as the reference standard. Fifty adults who did not have symptoms (23 men, 27 women; mean age, 57 ± 5 years; body mass index, 27 ± 5) underwent liver imaging with un-enhanced SECT, DECT, gray-scale US, US-SWE, proton-density fat-fraction MRI, and MRS for this prospective trial. MRS voxels for the reference standard were colocalized with all other modalities under investigation. For SECT (120 kVp), attenuation values were recorded. For rapid-switching DECT (80/140 kVp), monochromatic images (70-140 keV) and fat density-derived material decomposition images were reconstructed. For proton-density fat fraction MRI, a quantitative chemical shift-encoded method was used. For US, echogenicity was evaluated on a qualitative 0-3 scale. Quantitative US shear-wave velocities were also recorded. Data were analyzed by linear regression for each technique compared with MRS. There was excellent correlation between MRS and both proton-density fat-fraction MRI (r 2 = 0.992; slope, 0.974; intercept, -0.943) and SECT (r 2 = 0.856; slope, -0.559; intercept, 35.418). DECT fat attenuation had moderate correlation with MRS measurements (r 2 = 0.423; slope, 0.034; intercept, 8.459). There was good correlation between qualitative US echogenicity and MRS measurements with a weighted kappa value of 0.82. US-SWE velocity did not have reliable correlation with MRS measurements (r 2 = 0.004; slope, 0.069; intercept, 6.168). Quantitative MRI proton-density fat fraction and SECT fat attenuation have excellent linear correlation with MRS measurements and can serve as accurate noninvasive biomarkers for quantifying steatosis. Material decomposition with DECT does not improve the accuracy of fat quantification over conventional SECT attenuation. US-SWE has poor accuracy for liver fat quantification.

The Human Voice in Speech and Singing

NASA Astrophysics Data System (ADS)

Lindblom, Björn; Sundberg, Johan

This chapter speech describes various aspects of the human voice as a means of communication in speech and singing. From the point of view of function, vocal sounds can be regarded as the end result of a three stage process: (1) the compression of air in the respiratory system, which produces an exhalatory airstream, (2) the vibrating vocal folds' transformation of this air stream to an intermittent or pulsating air stream, which is a complex tone, referred to as the voice source, and (3) the filtering of this complex tone in the vocal tract resonator. The main function of the respiratory system is to generate an overpressure of air under the glottis, or a subglottal pressure. Section 16.1 describes different aspects of the respiratory system of significance to speech and singing, including lung volume ranges, subglottal pressures, and how this pressure is affected by the ever-varying recoil forces. The complex tone generated when the air stream from the lungs passes the vibrating vocal folds can be varied in at least three dimensions: fundamental frequency, amplitude and spectrum. Section 16.2 describes how these properties of the voice source are affected by the subglottal pressure, the length and stiffness of the vocal folds and how firmly the vocal folds are adducted. Section 16.3 gives an account of the vocal tract filter, how its form determines the frequencies of its resonances, and Sect. 16.4 gives an account for how these resonance frequencies or formants shape the vocal sounds by imposing spectrum peaks separated by spectrum valleys, and how the frequencies of these peaks determine vowel and voice qualities. The remaining sections of the chapter describe various aspects of the acoustic signals used for vocal communication in speech and singing. The syllable structure is discussed in Sect. 16.5, the closely related aspects of rhythmicity and timing in speech and singing is described in Sect. 16.6, and pitch and rhythm aspects in Sect. 16.7. The impressive control of all these acoustic characteristics of vocal signals is discussed in Sect. 16.8, while Sect. 16.9 considers expressive aspects of vocal communication.

SU-F-J-195: On the Performance of Four Dual Energy CT Formalisms for Extracting Proton Stopping Powers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, E; Royle, G; Lalonde, A

Purpose: Dual energy CT can predict stopping power ratios (SPR) for ion therapy treatment planning. Several approaches have been proposed recently, however accuracy and practicability in a clinical workflow are unaddressed. The aim of this work is to provide a fair comparison of available approaches in a human-like phantom to find the optimal method for tissue characterization in a clinical situation. Methods: The SPR determination accuracy is investigated using simulated DECT images. A virtual human-like phantom is created containing 14 different standard human tissues. SECT (120 kV) and DECT images (100 kV and 140 kV Sn) are simulated using themore » software ImaSim. The single energy CT (SECT) stoichiometric calibration method and four recently published calibration-based DECT methods are implemented and used to predict the SPRs from simulated images. The difference between SPR predictions and theoretical SPR are compared pixelwize. Mean, standard deviation and skewness of the SPR difference distributions are used as measures for bias, dispersion and symmetry. Results: The average SPR differences and standard deviations are (0.22 ± 1.27)% for SECT, and A) (−0.26 ± 1.30)%, B) (0.08 ± 1.12)%, C) (0.06 ± 1.15)% and D) (−0.05 ± 1.05)% for the four DECT methods. While SPR prediction using SECT is showing a systematic error on SPR, the DECT methods B, C and D are unbiased. The skewness of the SECT distribution is 0.57%, and A) −0.19%, B) −0.56%, C) −0.29% and D) −0.07% for DECT methods respectively. Conclusion: The here presented DECT methods B, C and D outperform the commonly used SECT stoichiometric calibration. These methods predict SPR accurately without a bias and within ± 1.2% (68th percentile). This indicates that DECT potentially improves accuracy of range predictions in proton therapy. A validation of these findings using clinical CT images of real tissues is necessary.« less

The Human Voice in Speech and Singing

NASA Astrophysics Data System (ADS)

Lindblom, Björn; Sundberg, Johan

This chapter describes various aspects of the human voice as a means of communication in speech and singing. From the point of view of function, vocal sounds can be regarded as the end result of a three stage process: (1) the compression of air in the respiratory system, which produces an exhalatory airstream, (2) the vibrating vocal folds' transformation of this air stream to an intermittent or pulsating air stream, which is a complex tone, referred to as the voice source, and (3) the filtering of this complex tone in the vocal tract resonator. The main function of the respiratory system is to generate an overpressure of air under the glottis, or a subglottal pressure. Section 16.1 describes different aspects of the respiratory system of significance to speech and singing, including lung volume ranges, subglottal pressures, and how this pressure is affected by the ever-varying recoil forces. The complex tone generated when the air stream from the lungs passes the vibrating vocal folds can be varied in at least three dimensions: fundamental frequency, amplitude and spectrum. Section 16.2 describes how these properties of the voice source are affected by the subglottal pressure, the length and stiffness of the vocal folds and how firmly the vocal folds are adducted. Section 16.3 gives an account of the vocal tract filter, how its form determines the frequencies of its resonances, and Sect. 16.4 gives an account for how these resonance frequencies or formants shape the vocal sounds by imposing spectrum peaks separated by spectrum valleys, and how the frequencies of these peaks determine vowel and voice qualities. The remaining sections of the chapter describe various aspects of the acoustic signals used for vocal communication in speech and singing. The syllable structure is discussed in Sect. 16.5, the closely related aspects of rhythmicity and timing in speech and singing is described in Sect. 16.6, and pitch and rhythm aspects in Sect. 16.7. The impressive control of all these acoustic characteristics of vocal signals is discussed in Sect. 16.8, while Sect. 16.9 considers expressive aspects of vocal communication.

Fiscal year 1988 program report: Pennsylvania Center for Water Resources Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonnell, A.J.

1989-08-01

Three projects and a program of technology transfer were conducted under the Pennsylvania Fiscal Year 1988 State Water Resources Research Grants Program (PL 98-242, Sect. 104). In a completed study focused on the protection of water supplies, mature slow sand filters were found to remove 100 percent of Cryptosporidium and Giardia cysts. A site specific study examined the behavior of sedimentary iron and manganese in an acid mine drainage wetland system. A study was initiated to link a comprehensive non-point source model, AGNPS with current GIS technology to enhance the models' utility for evaluating regional water quality problems related tomore » non-point source agricultural pollution.« less

Validation of proton stopping power ratio estimation based on dual energy CT using fresh tissue samples

NASA Astrophysics Data System (ADS)

Taasti, Vicki T.; Michalak, Gregory J.; Hansen, David C.; Deisher, Amanda J.; Kruse, Jon J.; Krauss, Bernhard; Muren, Ludvig P.; Petersen, Jørgen B. B.; McCollough, Cynthia H.

2018-01-01

Dual energy CT (DECT) has been shown, in theoretical and phantom studies, to improve the stopping power ratio (SPR) determination used for proton treatment planning compared to the use of single energy CT (SECT). However, it has not been shown that this also extends to organic tissues. The purpose of this study was therefore to investigate the accuracy of SPR estimation for fresh pork and beef tissue samples used as surrogates of human tissues. The reference SPRs for fourteen tissue samples, which included fat, muscle and femur bone, were measured using proton pencil beams. The tissue samples were subsequently CT scanned using four different scanners with different dual energy acquisition modes, giving in total six DECT-based SPR estimations for each sample. The SPR was estimated using a proprietary algorithm (syngo.via DE Rho/Z Maps, Siemens Healthcare, Forchheim, Germany) for extracting the electron density and the effective atomic number. SECT images were also acquired and SECT-based SPR estimations were performed using a clinical Hounsfield look-up table. The mean and standard deviation of the SPR over large volume-of-interests were calculated. For the six different DECT acquisition methods, the root-mean-square errors (RMSEs) for the SPR estimates over all tissue samples were between 0.9% and 1.5%. For the SECT-based SPR estimation the RMSE was 2.8%. For one DECT acquisition method, a positive bias was seen in the SPR estimates, having a mean error of 1.3%. The largest errors were found in the very dense cortical bone from a beef femur. This study confirms the advantages of DECT-based SPR estimation although good results were also obtained using SECT for most tissues.

TU-FG-BRB-02: The Impact of Using Dual-Energy CT for Determining Proton Stopping Powers: Comparison Between Theory and Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, E; Jee, K; Zhang, R

Purpose: To evaluate the clinical performance of dual-energy CT (DECT) in determining proton stopping power ratios (SPR) and demonstrate advantages over conventional single-energy CT (SECT). Methods: SECT and DECT scans of tissue-equivalent plastics as well as animal meat samples are performed with a Siemens SOMATOM Definition Flash. The methods of Schneider et al. (1996) and Bourque et al. (2014) are used to determine proton SPR on SECT and DECT images, respectively. Waterequivalent path length (WEPL) measurements of plastics and tissue samples are performed with a 195 MeV proton beam. WEPL values are determined experimentally using the depth-dose shift and dosemore » extinction methods. Results: Comparison between CT-based and experimental WEPL is performed for 12 tissue-equivalent plastic as well as 6 meat boxes containing animal liver, kidney, heart, stomach, muscle and bones. For plastic materials, results show a systematic improvement in determining SPR with DECT, with a mean absolute error of 0.4% compared to 1.7% for SECT. For the meat samples, preliminary results show the ability for DECT to determine WEPL with a mean absolute value of 1.1% over all meat boxes. Conclusion: This work demonstrates the potential in using DECT for determining proton SPR with plastic materials in a clinical context. Further work is required to show the benefits of DECT for tissue samples. While experimental uncertainties could be a limiting factor to show the benefits of DECT over SECT for the meat samples, further work is required to adapt the DECT formalism in the context of clinical use, where noise and artifacts play an important role.« less

[A couple in the sect: between freedom of membership and risks of abuse].

PubMed

Grattagliano, I; Tangari, D

2015-01-01

Psychological cults are of particular interest to criminologists due to their complex and multi-faceted structures. They may come in the form of organizations, movements, and training centers that make promises to their victims of developing or strengthening their psycho-relational capacities, thus resulting in improvements in their social, professional, and personal lives. Starting from the complex and delicate story of a professional couple who join a cult, the authors describe one case of a organization that are referred to as "psycho-sects", and with a significant number of followers. These cases came to our attention through judicial authorities, and they offer us an opportunity to look at two aspects associated with psycho-sects: The need of individuals to belong to such groups; and the risk of abuse and violence that they face.

Linguistics, cognitive psychology, and the Now-or-Never bottleneck.

PubMed

Endress, Ansgar D; Katzir, Roni

2016-01-01

Christiansen & Chater (C&C)'s key premise is that "if linguistic information is not processed rapidly, that information is lost for good" (sect. 1, para. 1). From this "Now-or-Never bottleneck" (NNB), C&C derive "wide-reaching and fundamental implications for language processing, acquisition and change as well as for the structure of language itself" (sect. 2, para. 10). We question both the premise and the consequentiality of its purported implications.

Taxonomic changes in Oenothera sections Gaura and Calylophus (Onagraceae).

PubMed

Wagner, Warren L; Krakos, Kyra N; Hoch, Peter C

2013-01-01

The long-recognized genus Gaura was shown recently to be deeply nested within one of two major clades of Oenothera. New molecular data indicate further taxonomic changes are necessary in Oenothera sect. Gaura. We make these changes here, including three new combinations, in advance of the Onagraceae treatment for the Flora of North America. The new phylogenetic studies show that several pairs of taxa treated as subspecies in the most recent revision by Raven and Gregory (1972) had independent origins within sect. Gaura, and are here elevated to species level (Oenothera nealleyi for Gaura suffulta subsp. nealleyi; Oenothera dodgeniana for Gaura neomexicana subsp. neomexicana; and Oenothera podocarpa for Gaura hexandra subsp. gracilis). Also, a nomenclatural problem in Oenothera sect. Calylophus is corrected by adopting the name Oenothera capillifolia Scheele for the species known previously, and nomenclaturally correct, as Calylophus berlandieri Spach. This problem necessitates a new combination Oenothera capillifolia subsp. berlandieri.

Microsatellites for Oenothera gayleana and O. hartwegii subsp. filifolia (Onagraceae), and their utility in section Calylophus.

PubMed

Lewis, Emily M; Fant, Jeremie B; Moore, Michael J; Hastings, Amy P; Larson, Erica L; Agrawal, Anurag A; Skogen, Krissa A

2016-02-01

Eleven nuclear and four plastid microsatellite markers were screened for two gypsum endemic species, Oenothera gayleana and O. hartwegii subsp. filifolia, and tested for cross-amplification in the remaining 11 taxa within Oenothera sect. Calylophus (Onagraceae). Microsatellite markers were tested in two to three populations spanning the ranges of both O. gayleana and O. hartwegii subsp. filifolia. The nuclear microsatellite loci consisted of both di- and trinucleotide repeats with one to 17 alleles per population. Several loci showed significant deviation from Hardy-Weinberg equilibrium, which may be evidence of chromosomal rings. The plastid microsatellite markers identified one to seven haplotypes per population. The transferability of these markers was confirmed in all 11 taxa within Oenothera sect. Calylophus. The microsatellite loci characterized here are the first developed and tested in Oenothera sect. Calylophus. These markers will be used to assess whether pollinator foraging distance influences population genetic parameters in predictable ways.

Taxonomic changes in Oenothera sections Gaura and Calylophus (Onagraceae)

PubMed Central

Wagner, Warren L.; Krakos, Kyra N.; Hoch, Peter C.

2013-01-01

Abstract The long-recognized genus Gaura was shown recently to be deeply nested within one of two major clades of Oenothera. New molecular data indicate further taxonomic changes are necessary in Oenothera sect. Gaura. We make these changes here, including three new combinations, in advance of the Onagraceae treatment for the Flora of North America. The new phylogenetic studies show that several pairs of taxa treated as subspecies in the most recent revision by Raven and Gregory (1972) had independent origins within sect. Gaura, and are here elevated to species level (Oenothera nealleyi for Gaura suffulta subsp. nealleyi; Oenothera dodgeniana for Gaura neomexicana subsp. neomexicana; and Oenothera podocarpa for Gaura hexandra subsp. gracilis). Also, a nomenclatural problem in Oenothera sect. Calylophus is corrected by adopting the name Oenothera capillifolia Scheele for the species known previously, and nomenclaturally correct, as Calylophus berlandieri Spach. This problem necessitates a new combination Oenothera capillifolia subsp. berlandieri. PMID:24399892

Toxicological benchmarks for potential contaminants of concern for effects on soil and litter invertebrates and heterotrophic process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Will, M.E.; Suter, G.W. II

1995-09-01

An important step in ecological risk assessments is screening the chemicals occur-ring on a site for contaminants of potential concern. Screening may be accomplished by comparing reported ambient concentrations to a set of toxicological benchmarks. Multiple endpoints for assessing risks posed by soil-borne contaminants to organisms directly impacted by them have been established. This report presents benchmarks for soil invertebrates and microbial processes and addresses only chemicals found at United States Department of Energy (DOE) sites. No benchmarks for pesticides are presented. After discussing methods, this report presents the results of the literature review and benchmark derivation for toxicity tomore » earthworms (Sect. 3), heterotrophic microbes and their processes (Sect. 4), and other invertebrates (Sect. 5). The final sections compare the benchmarks to other criteria and background and draw conclusions concerning the utility of the benchmarks.« less

Environmental Factors Determining the Accumulation of Metals: Cu, Zn, Mn and Fe in Tissues of Taraxacum sp. sect. Taraxacum.

PubMed

Królak, Elżbieta; Marciniuk, Jolanta; Popijantus, Katarzyna; Wasilczuk, Paulina; Kasprzykowski, Zbigniew

2018-05-19

The genus Taraxacum is used in the assessment of soil contamination with heavy metals. There are relatively few studies using sections or species representing this genus. The presented research was conducted in Poland on two habitats, varied in terms of nutrients and metals content. The content of selected metals in leaves and roots of Taraxacum sect. Taraxacum was determined. It was found that in the conditions of increased content of metals in the soil, the analysed species representing sect. Taraxacum accumulate higher amounts of metals in their leaves and roots. Factors of translocation of selected metals from roots to leaves of Taraxacum species, representing the Taraxacum section, are affected by i.a. soil reaction and the content of Corg, Ntot. in the soil. No influence of soil properties on metal biological concentration factor was observed.

[The growing endangerment of specialists in private practice--opening up access to hospital outpatient clinics from a legal point of view].

PubMed

Luxenburger, Bernd

2006-01-01

There are two new rules of the German Health System Modernisation Act (GMG) affecting the activity of specialists in private practice: the authorization of a hospital according to Sect. 116 a (SGB V; Title Five of the Social Code) subsidiary to the registration of a SHI physicians and the authorization of a hospital-based physician. Negative effects on office-based physician in private practice will only occur if, for example, an ambulatory healthcare centre (MVZ) is being established by the hospital owner. Currently, Sect. 116 b SGB V also does not have any negative impact on office-based specialists. The benefits catalogue according to Sect. 116 b Para 3 SGB V has so far been narrowly defined. And, in the face of the diverging interests within the Joint Federal Committee Health Insurances/NationalAssociation of Statutory Health Insurance Physicians and Health Reform Consensus Act (GKG)--a noticeable broadening of this catalogue is not to be expected. Also, such a broadening of the scope of this catalogue will be counteracted by the fact that no legal right exists to the conclusion of a contract with the health insurance companies and that the health insurers will actually have to additionally reimburse for medical services according to the catalogue of Sect. 116b Para 3 SGB V beyond the total reimbursement budget.

Differentiation of low-attenuation intracranial hemorrhage and calcification using dual-energy computed tomography in a phantom system

PubMed Central

Nute, Jessica L.; Roux, Lucia Le; Chandler, Adam G.; Baladandayuthapani, Veera; Schellingerhout, Dawid; Cody, Dianna D.

2015-01-01

Objectives Calcific and hemorrhagic intracranial lesions with attenuation levels of <100 Hounsfield Units (HU) cannot currently be reliably differentiated by single-energy computed tomography (SECT). The proper differentiation of these lesion types would have a multitude of clinical applications. A phantom model was used to test the ability of dual-energy CT (DECT) to differentiate such lesions. Materials and Methods Agar gel-bound ferric oxide and hydroxyapatite were used to model hemorrhage and calcification, respectively. Gel models were scanned using SECT and DECT and organized into SECT attenuation-matched pairs at 16 attenuation levels between 0 and 100 HU. DECT data were analyzed using 3D Gaussian mixture models (GMMs), as well as a simplified threshold plane metric derived from the 3D GMM, to assign voxels to hemorrhagic or calcific categories. Accuracy was calculated by comparing predicted voxel assignments with actual voxel identities. Results We measured 6,032 voxels from each gel model, for a total of 193,024 data points (16 matched model pairs). Both the 3D GMM and its more clinically implementable threshold plane derivative yielded similar results, with >90% accuracy at matched SECT attenuation levels ≥50 HU. Conclusions Hemorrhagic and calcific lesions with attenuation levels between 50 and 100 HU were differentiable using DECT in a clinically relevant phantom system with >90% accuracy. This method warrants further testing for potential clinical applications. PMID:25162534

The TENCompetence Infrastructure: A Learning Network Implementation

NASA Astrophysics Data System (ADS)

Vogten, Hubert; Martens, Harrie; Lemmers, Ruud

The TENCompetence project developed a first release of a Learning Network infrastructure to support individuals, groups and organisations in professional competence development. This infrastructure Learning Network infrastructure was released as open source to the community thereby allowing users and organisations to use and contribute to this development as they see fit. The infrastructure consists of client applications providing the user experience and server components that provide the services to these clients. These services implement the domain model (Koper 2006) by provisioning the entities of the domain model (see also Sect. 18.4) and henceforth will be referenced as domain entity services.

43. Indian Creek (Keeler-Wolf 1986c, 1990d)

Treesearch

Sheauchi Cheng

2004-01-01

This recommended RNA is on the Lassen National Forest, Tehama County. It is about 9 miles (14 km) SE. of Paynes Creek. It occupies portions of sects. 33 and 34 T28N, R1E, sects. 2, 3, 4, 9, 10, 11, 12, 13, 14, and 15 T27N, R1E MDBM (40°13'N., 121°50'W.), USGS Panther Spring and Dewitt Peak quads (fig. 89). Ecological subsection – Tuscan...

86. Sugar Creek (Keeler-Wolf 1984d, 1989f, Sawyer and Thornburgh 1971)

Treesearch

Sheauchi Cheng

2004-01-01

This candidate RNA is on the Klamath National Forest. The area is located largely within the Russian Wilderness and is about 6 miles (9.7 km) W. of Callihan. It occupies portions of sects. 18, 19, 20, 29, 30, and 31 T40N, R9W and sects. 25 and 36 T40N, R10W MDBM (41°17'N., 122°56'W.), USGS Eaton Peak quad (fig. 171). Ecological subsection...

Microsatellites for Oenothera gayleana and O. hartwegii subsp. filifolia (Onagraceae), and their utility in section Calylophus1

PubMed Central

Lewis, Emily M.; Fant, Jeremie B.; Moore, Michael J.; Hastings, Amy P.; Larson, Erica L.; Agrawal, Anurag A.; Skogen, Krissa A.

2016-01-01

Premise of the study: Eleven nuclear and four plastid microsatellite markers were screened for two gypsum endemic species, Oenothera gayleana and O. hartwegii subsp. filifolia, and tested for cross-amplification in the remaining 11 taxa within Oenothera sect. Calylophus (Onagraceae). Methods and Results: Microsatellite markers were tested in two to three populations spanning the ranges of both O. gayleana and O. hartwegii subsp. filifolia. The nuclear microsatellite loci consisted of both di- and trinucleotide repeats with one to 17 alleles per population. Several loci showed significant deviation from Hardy–Weinberg equilibrium, which may be evidence of chromosomal rings. The plastid microsatellite markers identified one to seven haplotypes per population. The transferability of these markers was confirmed in all 11 taxa within Oenothera sect. Calylophus. Conclusions: The microsatellite loci characterized here are the first developed and tested in Oenothera sect. Calylophus. These markers will be used to assess whether pollinator foraging distance influences population genetic parameters in predictable ways. PMID:26949578

Analysis of Siting Suitability, MX Land Mobile Missile System, Bureau of Land Management and Department of Defense Lands.

DTIC Science & Technology

1976-09-03

DISTRIBUTION STATEMENT (of the abstract entered in Block 20, If different from Report) 18 . SUPPLEMENTARY NOTES 19. KEY WORDS (Continue on reverse side...OANCH. OSTRUCT By 0~ OCIVIL QELEC. 0 DING. NO. OR ITEM COMMENTS ACTION BY PAGE NO. NO. REV. CONF. PROJ. ENGR. 18 Sect 1.3, last paragraph; third line...2.1.2, second paragraph, second line: What caused most reduction? Explain! (See Comment 18 ) A F -L 16 23 Sect 2.1.2, second line on page 16: (See

Technical Note: Improving proton stopping power ratio determination for a deformable silicone-based 3D dosimeter using dual energy CT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taasti, Vicki Trier, E-mail: victaa@rm.dk; Høye, Ellen Marie; Hansen, David Christoffer

Purpose: The aim of this study was to investigate whether the stopping power ratio (SPR) of a deformable, silicone-based 3D dosimeter could be determined more accurately using dual energy (DE) CT compared to using conventional methods based on single energy (SE) CT. The use of SECT combined with the stoichiometric calibration method was therefore compared to DECT-based determination. Methods: The SPR of the dosimeter was estimated based on its Hounsfield units (HUs) in both a SECT image and a DECT image set. The stoichiometric calibration method was used for converting the HU in the SECT image to a SPR valuemore » for the dosimeter while two published SPR calibration methods for dual energy were applied on the DECT images. Finally, the SPR of the dosimeter was measured in a 60 MeV proton by quantifying the range difference with and without the dosimeter in the beam path. Results: The SPR determined from SECT and the stoichiometric method was 1.10, compared to 1.01 with both DECT calibration methods. The measured SPR for the dosimeter material was 0.97. Conclusions: The SPR of the dosimeter was overestimated by 13% using the stoichiometric method and by 3% when using DECT. If the stoichiometric method should be applied for the dosimeter, the HU of the dosimeter must be manually changed in the treatment planning system in order to give a correct SPR estimate. Using a wrong SPR value will cause differences between the calculated and the delivered treatment plans.« less

X-231B technology demonstration for in situ treatment of contaminated soil: Contaminant characterization and three dimensional spatial modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, O.R.; Siegrist, R.L.; Mitchell, T.J.

1993-11-01

Fine-textured soils and sediments contaminated by trichloroethylene (TCE) and other chlorinated organics present a serious environmental restoration challenge at US Department of Energy (DOE) sites. DOE and Martin Marietta Energy Systems, Inc. initiated a research and demonstration project at Oak Ridge National Laboratory. The goal of the project was to demonstrate a process for closure and environmental restoration of the X-231B Solid Waste Management Unit at the DOE Portsmouth Gaseous Diffusion Plant. The X-231B Unit was used from 1976 to 1983 as a land disposal site for waste oils and solvents. Silt and clay deposits beneath the unit were contaminatedmore » with volatile organic compounds and low levels of radioactive substances. The shallow groundwater was also contaminated, and some contaminants were at levels well above drinking water standards. This document begins with a summary of the subsurface physical and contaminant characteristics obtained from investigative studies conducted at the X-231B Unit prior to January 1992 (Sect. 2). This is then followed by a description of the sample collection and analysis methods used during the baseline sampling conducted in January 1992 (Sect. 3). The results of this sampling event were used to develop spatial models for VOC contaminant distribution within the X-231B Unit.« less

[The Essenes and medicine].

PubMed

Kottek, Samuel

2011-01-01

The Essenes were a Jewish sect, which flourished around the first century. We have limited our study to hygienic and medical aspects, as documented in the works of Josephus Flavius, Philo of Alexandria, and Pliny the Elder; Josephus and Philo were personally in contact with these sectarian Jews. We have described the regimen of life of these communities, who lived in strictly organised fashion, their meals taken in common, their bathing in cold water, their clothing, the Sabbath rest, the lavatories, and more. Most Essenes remained single, they adopted however small children, and educated them in accordance to their principles. There was no private property, but old people and sick residents were taken care of by the community. The Essenes, as well as the Therapeuts described by Philo, were knowledgeable in medical lore, they treasured old books and studied the virtues of medicinal plants. There is no clear-cut consensus whether the Essenes, the Therapeuts, and the Qumran residents were one and the same sect, or whether they were similar sub-sects. The calm, strictly regulated and frugal way of life of the Essenes enabled them to attain old age, often beyond 100 years.

Algebraic Systems and Pushdown Automata

NASA Astrophysics Data System (ADS)

Petre, Ion; Salomaa, Arto

We concentrate in this chapter on the core aspects of algebraic series, pushdown automata, and their relation to formal languages. We choose to follow here a presentation of their theory based on the concept of properness. We introduce in Sect. 2 some auxiliary notions and results needed throughout the chapter, in particular the notions of discrete convergence in semirings and C-cycle free infinite matrices. In Sect. 3 we introduce the algebraic power series in terms of algebraic systems of equations. We focus on interconnections with context-free grammars and on normal forms. We then conclude the section with a presentation of the theorems of Shamir and Chomsky-Schützenberger. We discuss in Sect. 4 the algebraic and the regulated rational transductions, as well as some representation results related to them. Section 5 is dedicated to pushdown automata and focuses on the interconnections with classical (non-weighted) pushdown automata and on the interconnections with algebraic systems. We then conclude the chapter with a brief discussion of some of the other topics related to algebraic systems and pushdown automata.

Phylogeny of holoparasitic Orobanche (Orobanchaceae) inferred from nuclear ITS sequences

USGS Publications Warehouse

Schneeweiss, G.M.; Colwell, A.; Park, J.-M.; Jang, C.-G.; Stuessy, Tod F.

2004-01-01

Orobanche is the largest genus among the holoparasitic members of Orobanchaceae. We present the first molecular phylogenetic analysis (using nuclear ITS sequences) that includes members of all sections of Orobanche, Gymnocaulis, Myzorrhiza, Trionychon, and Orobanche. Orobanche is not monophyletic, but falls into two lineages: (1) the Orobanche group comprises Orobanche sect. Orobanche and the small Near Asian genus Diphelypaea and is characterized by a chromosome base number of x = 19 and (2) the Phelipanche group contains Orobanche sects. Gymnocaulis, Myzorrhiza, and Trionychon and possesses a chromosome base number of x = 12. The relationships between these two groups and to other genera such as Boschniakia or Cistanche remain unresolved. Within the Orobanche group, Orobanche macrolepis and Orobanche anatolica (including Orobanche colorata) constitute two phylogenetically distinct lineages. Intrasectional structurings proposed by some authors for O. sect. Orobanche are not confirmed by the molecular data. In most cases, intraspecific sequence divergence between accessions, if present, is negligible and not correlated with morphological or ecological traits. In a few cases, however, there is evidence for the presence of cryptic taxa. ?? 2003 Elsevier Science (USA). All rights reserved.

A molecular phylogeny of Caraganeae (Leguminosae, Papilionoideae) reveals insights into new generic and infrageneric delimitations

PubMed Central

Duan, Lei; Yang, Xue; Liu, Peiliang; Johnson, Gabriel; Wen, Jun; Chang, Zhaoyang

2016-01-01

Abstract Based on sequence data of nuclear ITS and plastid matK, trnL-F and psbA-trnH markers, the phylogeny of the subtribes Caraganinae and Chesneyinae in tribe Caraganeae was inferred. The results support the monophyly of each of the subtribes. Within subtribes Caraganinae, Calophaca and Halimodendron are herein transferred into Caragana to ensure its generic monophyly. The subtribe Chesneyinae is composed of four well-supported genera: Chesneya, Chesniella, Gueldenstaedtia and Tibetia. Based on phylogenetic, morphological, distributional and habitat type evidence, the genus Chesneya was divided into three monophyletic sections: Chesneya sect. Chesneya, Chesneya sect. Pulvinatae and Chesneya sect. Spinosae. Chesneya macrantha is herein transferred into Chesniella. Spongiocarpella is polyphyletic and its generic rank is not maintained. The position of Chesneya was incongruent in the nuclear ITS and the plastid trees. A paternal chloroplast capture event via introgression is hypothesized for the origin of Chesneya, which is postulated to have involved the common ancestor of Chesniella (♂) and that of the Gueldenstaedtia – Tibetia (GUT) clade (♀) as the parents. PMID:27829801

Are white evangelical Protestants lower class? A partial test of church-sect theory.

PubMed

Schwadel, Philip

2014-07-01

Testing hypotheses derived from church-sect theory and contemporary research about changes in evangelical Protestants' social status, I use repeated cross-sectional survey data spanning almost four decades to examine changes in the social-class hierarchy of American religious traditions. While there is little change in the social-class position of white evangelical Protestants from the early 1970s to 2010, there is considerable change across birth cohorts. Results from hierarchical age-period-cohort models show: (1) robust, across-cohort declines in social-class differences between white evangelical Protestants and liberal Protestants, affiliates of "other" religions, and the unaffiliated, (2) stability in social-class differences between white evangelical Protestants and moderate, Pentecostal, and nondenominational Protestants, (3) moderate across-cohort growth in social-class differences between white evangelical Protestants and Catholics, and (4) these patterns vary across indicators of social class. The findings in this article provide partial support for church-sect theory as well as other theories of social change that emphasize the pivotal role of generations. Copyright © 2014 Elsevier Inc. All rights reserved.

Developments and Tendencies in Fission Reactor Concepts

NASA Astrophysics Data System (ADS)

Adamov, E. O.; Fuji-Ie, Y.

This chapter describes, in two parts, new-generation nuclear energy systems that are required to be in harmony with nature and to make full use of nuclear resources. The issues of transmutation and containment of radioactive waste will also be addressed. After a short introduction to the first part, Sect. 58.1.2 will detail the requirements these systems must satisfy on the basic premise of peaceful use of nuclear energy. The expected designs themselves are described in Sect. 58.1.3. The subsequent sections discuss various types of advanced reactor systems. Section 58.1.4 deals with the light water reactor (LWR) whose performance is still expected to improve, which would extend its application in the future. The supercritical-water-cooled reactor (SCWR) will also be shortly discussed. Section 58.1.5 is mainly on the high temperature gas-cooled reactor (HTGR), which offers efficient and multipurpose use of nuclear energy. The gas-cooled fast reactor (GFR) is also included. Section 58.1.6 focuses on the sodium-cooled fast reactor (SFR) as a promising concept for advanced nuclear reactors, which may help both to achieve expansion of energy sources and environmental protection thus contributing to the sustainable development of mankind. The molten-salt reactor (MSR) is shortly described in Sect. 58.1.7. The second part of the chapter deals with reactor systems of a new generation, which are now found at the research and development (R&D) stage and in the medium term of 20-30 years can shape up as reliable, economically efficient, and environmentally friendly energy sources. They are viewed as technologies of cardinal importance, capable of resolving the problems of fuel resources, minimizing the quantities of generated radioactive waste and the environmental impacts, and strengthening the regime of nonproliferation of the materials suitable for nuclear weapons production. Particular attention has been given to naturally safe fast reactors with a closed fuel cycle (CFC) - as an advanced and promising reactor system that offers solutions to the above problems. The difference (not confrontation) between the approaches to nuclear power development based on the principles of “inherent safety” and “natural safety” is demonstrated.

Extracting oscillation frequencies from sparse spectra: Fourier analysis

NASA Astrophysics Data System (ADS)

Jerzykiewicz, M.

2008-12-01

I begin by explaining the properties of spectral windows of time-series data. Emphasis is on data obtained at a single geographic longitude, but ground-based multi-longitude cam- paigns and space missions such as MOST and Hipparcos are not entirely neglected. In the second section, I consider the Fourier transform of time-series data and the procedure of pre-whitening. Sect. 3 is devoted to the pioneers of the subject. In Sect. 4, I suggest how to avoid pitfalls in the practice of periodogram-analysing variable-stars observations. In the last section, I venture an opinion.

Aspergillus pragensis sp. nov. discovered during molecular reidentification of clinical isolates belonging to Aspergillus section Candidi.

PubMed

Hubka, Vit; Lyskova, Pavlina; Frisvad, Jens C; Peterson, Stephen W; Skorepova, Magdalena; Kolarik, Miroslav

2014-08-01

The identity of nine clinical isolates recovered from Czech patients and presumptively identified as Aspergillus sp. section Candidi based on colony morphology was revised using sequences of β-tubulin, calmodulin gene sequence, and internal transcribed spacer rDNA. Six isolates were from suspected and proven onychomycosis, one from otitis externa, and two associated with probable invasive aspergillosis. The results showed that one Aspergillus candidus isolate was the cause of otitis externa, and both isolates obtained from sputa of patients with probable invasive aspergillosis were reidentified as A. carneus (sect. Terrei) and A. flavus (sect. Flavi). Three isolates from nail scrapings were identified as A. tritici, a verified agent of nondermatophyte onychomycosis. One isolate from toenail was determined to be A. candidus and the two isolates belonged to a hitherto undescribed species, Aspergillus pragensis sp. nov. This species is well supported by phylogenetic analysis based on β-tubulin and calmodulin gene and is distinguishable from other members of sect. Candidi by red-brown reverse on malt extract agar, slow growth on Czapek-Dox agar and inability to grow at 37°C. A secondary metabolite analysis was also provided with comparison of metabolite spectrum to other species. Section Candidi now encompasses five species for which a dichotomous key based on colony characteristics is provided. All clinical isolates were tested for susceptibilities to selected antifungal agents using the Etest and disc diffusion method. Overall sect. Candidi members are highly susceptible to common antifungals. © The Author 2014. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Phylogeny and biogeography of Primula sect. Armerina: implications for plant evolution under climate change and the uplift of the Qinghai-Tibet Plateau.

PubMed

Ren, Guangpeng; Conti, Elena; Salamin, Nicolas

2015-08-16

The historical orogenesis and associated climatic changes of mountain areas have been suggested to partly account for the occurrence of high levels of biodiversity and endemism. However, their effects on dispersal, differentiation and evolution of many groups of plants are still unknown. In this study, we examined the detailed diversification history of Primula sect. Armerina, and used biogeographic analysis and macro-evolutionary modeling to investigate a series of different questions concerning the evolution of the geographical and ecological distribution of the species in this section. We sequenced five chloroplast and one nuclear genes for species of Primula sect. Armerina. Neither chloroplast nor nuclear trees support the monophyly of the section. The major incongruences between the two trees occur among closely related species and may be explained by hybridization. Our dating analyses based on the chloroplast dataset suggest that this section began to diverge from its relatives around 3.55 million years ago, largely coinciding with the last major uplift of the Qinghai-Tibet Plateau (QTP). Biogeographic analysis supports the origin of the section in the Himalayan Mountains and dispersal from the Himalayas to Northeastern QTP, Western QTP and Hengduan Mountains. Furthermore, evolutionary models of ecological niches show that the two P. fasciculata clades have significantly different climatic niche optima and rates of niche evolution, indicating niche evolution under climatic changes and further providing evidence for explaining their biogeographic patterns. Our results support the hypothesis that geologic and climatic events play important roles in driving biological diversification of organisms in the QTP area. The Pliocene uplift of the QTP and following climatic changes most likely promoted both the inter- and intraspecific divergence of Primula sect. Armerina. This study also illustrates how niche evolution under climatic changes influences biogeographic patterns.

On the Evolutionary and Biogeographic History of Saxifraga sect. Trachyphyllum (Gaud.) Koch (Saxifragaceae Juss.)

PubMed Central

DeChaine, Eric G.; Anderson, Stacy A.; McNew, Jennifer M.; Wendling, Barry M.

2013-01-01

Arctic-alpine plants in the genus Saxifraga L. (Saxifragaceae Juss.) provide an excellent system for investigating the process of diversification in northern regions. Yet, sect. Trachyphyllum (Gaud.) Koch, which is comprised of about 8 to 26 species, has still not been explored by molecular systematists even though taxonomists concur that the section needs to be thoroughly re-examined. Our goals were to use chloroplast trnL-F and nuclear ITS DNA sequence data to circumscribe the section phylogenetically, test models of geographically-based population divergence, and assess the utility of morphological characters in estimating evolutionary relationships. To do so, we sequenced both genetic markers for 19 taxa within the section. The phylogenetic inferences of sect. Trachyphyllum using maximum likelihood and Bayesian analyses showed that the section is polyphyletic, with S. aspera L. and S bryoides L. falling outside the main clade. In addition, the analyses supported several taxonomic re-classifications to prior names. We used two approaches to test biogeographic hypotheses: i) a coalescent approach in Mesquite to test the fit of our reconstructed gene trees to geographically-based models of population divergence and ii) a maximum likelihood inference in Lagrange. These tests uncovered strong support for an origin of the clade in the Southern Rocky Mountains of North America followed by dispersal and divergence episodes across refugia. Finally we adopted a stochastic character mapping approach in SIMMAP to investigate the utility of morphological characters in estimating evolutionary relationships among taxa. We found that few morphological characters were phylogenetically informative and many were misleading. Our molecular analyses provide a foundation for the diversity and evolutionary relationships within sect. Trachyphyllum and hypotheses for better understanding the patterns and processes of divergence in this section, other saxifrages, and plants inhabiting the North Pacific Rim. PMID:23922810

Altered Redox Balance in the Development of Chronic Hypoxia-induced Pulmonary Hypertension.

PubMed

Jernigan, Nikki L; Resta, Thomas C; Gonzalez Bosc, Laura V

2017-01-01

Normally, the pulmonary circulation is maintained in a low-pressure, low-resistance state with little resting tone. Pulmonary arteries are thin-walled and rely heavily on pulmonary arterial distension and recruitment for reducing pulmonary vascular resistance when cardiac output is elevated. Under pathophysiological conditions, however, active vasoconstriction and vascular remodeling lead to enhanced pulmonary vascular resistance and subsequent pulmonary hypertension (PH). Chronic hypoxia is a critical pathological factor associated with the development of PH resulting from airway obstruction (COPD, sleep apnea), diffusion impairment (interstitial lung disease), developmental lung abnormalities, or high altitude exposure (World Health Organization [WHO]; Group III). The rise in pulmonary vascular resistance increases right heart afterload causing right ventricular hypertrophy that can ultimately lead to right heart failure in patients with chronic lung disease. PH is typically characterized by diminished paracrine release of vasodilators, antimitogenic factors, and antithrombotic factors (e.g., nitric oxide and protacyclin) and enhanced production of vasoconstrictors and mitogenic factors (e.g., reactive oxygen species and endothelin-1) from the endothelium and lung parenchyma. In addition, phenotypic changes to pulmonary arterial smooth muscle cells (PASMC), including alterations in Ca 2+ homeostasis, Ca 2+ sensitivity, and activation of transcription factors are thought to play prominent roles in the development of both vasoconstrictor and arterial remodeling components of hypoxia-associated PH. These changes in PASMC function are briefly reviewed in Sect. 1 and the influence of altered reactive oxygen species homeostasis on PASMC function discussed in Sects. 2-4.

TU-FG-BRB-01: Dual Energy CT Proton Stopping Power Ratio Calibration and Validation with Animal Tissues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Y; Yin, L; Ainsley, C

Purpose: The conversion of Hounsfield Unit (HU) to proton stopping power ratio (SPR) is a main source of uncertainty in proton therapy. In this study, the SPRs of animal tissues were measured and compared with prediction from dual energy CT (DECT) and single energy CT (SECT) calibrations. Methods: A stoichiometric calibration method for DECT was applied to predict the SPR using CT images acquired at 80 kVp and 140 kVp. The dual energy index was derived based on the HUs of the paired spectral images and used to calculate the SPRs of the materials. Tissue surrogates with known chemical compositionsmore » were used for calibration, and animal tissues (pig brain, liver, kidney; veal shank, muscle) were used for validation. The materials were irradiated with proton pencil beams, and SPRs were deduced from the residual proton range measured using a multi-layer ion chamber device. In addition, Gafchromic EBT3 films were used to measure the distal dose profiles after irradiation through the tissue samples and compared with those calculated by the treatment planning system using both DECT and SECT predicted SPRs. Results: The differences in SPR between DECT prediction and measurement were −0.31±0.36% for bone, 0.47±0.42% for brain, 0.67±0.15% for liver, 0.51±0.52% for kidney, and −0.96±0.15% for muscle. The corresponding results using SECT were 3.1±0.12%, 1.90±0.45%, −0.66±0.11%, 2.33±0.21%, and −1.70±0.17%. In the film measurements, average distances between film and calculated distal dose profiles were 0.35±0.12 mm for DECT calibration and −1.22±0.12 mm for SECT calibration for a beam with a range of 15.79 cm. Conclusion: Our study indicates that DECT is superior to SECT for proton SPR prediction and has the potential to reduce the range uncertainty to less than 2%. DECT may permit the use of tighter distal and proximal range uncertainty margins for treatment, thereby increasing the precision of proton therapy.« less

Machine Learning

NASA Astrophysics Data System (ADS)

Hoffmann, Achim; Mahidadia, Ashesh

The purpose of this chapter is to present fundamental ideas and techniques of machine learning suitable for the field of this book, i.e., for automated scientific discovery. The chapter focuses on those symbolic machine learning methods, which produce results that are suitable to be interpreted and understood by humans. This is particularly important in the context of automated scientific discovery as the scientific theories to be produced by machines are usually meant to be interpreted by humans. This chapter contains some of the most influential ideas and concepts in machine learning research to give the reader a basic insight into the field. After the introduction in Sect. 1, general ideas of how learning problems can be framed are given in Sect. 2. The section provides useful perspectives to better understand what learning algorithms actually do. Section 3 presents the Version space model which is an early learning algorithm as well as a conceptual framework, that provides important insight into the general mechanisms behind most learning algorithms. In section 4, a family of learning algorithms, the AQ family for learning classification rules is presented. The AQ family belongs to the early approaches in machine learning. The next, Sect. 5 presents the basic principles of decision tree learners. Decision tree learners belong to the most influential class of inductive learning algorithms today. Finally, a more recent group of learning systems are presented in Sect. 6, which learn relational concepts within the framework of logic programming. This is a particularly interesting group of learning systems since the framework allows also to incorporate background knowledge which may assist in generalisation. Section 7 discusses Association Rules - a technique that comes from the related field of Data mining. Section 8 presents the basic idea of the Naive Bayesian Classifier. While this is a very popular learning technique, the learning result is not well suited for human comprehension as it is essentially a large collection of probability values. In Sect. 9, we present a generic method for improving accuracy of a given learner by generatingmultiple classifiers using variations of the training data. While this works well in most cases, the resulting classifiers have significantly increased complexity and, hence, tend to destroy the human readability of the learning result that a single learner may produce. Section 10 contains a summary, mentions briefly other techniques not discussed in this chapter and presents outlook on the potential of machine learning in the future.

Application of tissue mesodissection to molecular cancer diagnostics.

PubMed

Krizman, David; Adey, Nils; Parry, Robert

2015-02-01

To demonstrate clinical application of a mesodissection platform that was developed to combine advantages of laser-based instrumentation with the speed/ease of manual dissection for automated dissection of tissue off standard glass slides. Genomic analysis for KRAS gene mutation was performed on formalin fixed paraffin embedded (FFPE) cancer patient tissue that was dissected using the mesodissection platform. Selected reaction monitoring proteomic analysis for quantitative Her2 protein expression was performed on FFPE patient tumour tissue dissected by a laser-based instrument and the MilliSect instrument. Genomic analysis demonstrates highly confident detection of KRAS mutation specifically in lung cancer cells and not the surrounding benign, non-tumour tissue. Proteomic analysis demonstrates Her2 quantitative protein expression in breast cancer cells dissected manually, by laser-based instrumentation and by MilliSect instrumentation (mesodissection). Slide-mounted tissue dissection is commonly performed using laser-based instruments or manually scraping tissue by scalpel. Here we demonstrate that the mesodissection platform as performed by the MilliSect instrument for tissue dissection is cost-effective; it functions comparably to laser-based dissection and which can be adopted into a clinical diagnostic workflow. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Geographical isolation caused the diversification of the Mediterranean thorny cushion-like Astragalus L. sect. Tragacantha DC. (Fabaceae).

PubMed

Hardion, Laurent; Dumas, Pierre-Jean; Abdel-Samad, Farah; Bou Dagher Kharrat, Magda; Surina, Bostjan; Affre, Laurence; Médail, Frédéric; Bacchetta, Gianluigi; Baumel, Alex

2016-04-01

Understanding the origin and evolution of Mediterranean vascular flora within the long-term context of climate change requires a continuous study of historical biogeography supported by molecular phylogenetic approaches. Here we provide new insights into the fascinating but often overlooked diversification of Mediterranean xerophytic plants. Growing in some of the most stressing Mediterranean environments, i.e. coastal and mountainous opened habitats, the circum-Mediterranean Astragalus L. sect. Tragacantha DC. (Fabaceae) gathers several thorny cushion-like taxa. These have been the subjects of recent taxonomical studies, but they have not yet been investigated within a comprehensive molecular framework. Bayesian phylogenetics applied to rDNA ITS sequences reveal that the diversification of A. sect. Tragacantha has roots dating back to the Pliocene, and the same data also indicate an eastern-western split giving rise to the five main lineages that exist today. In addition, AFLP fingerprinting supports an old east-west pattern of vicariance that completely rules out the possibility of a recent eastern origin for western taxa. The observed network of genetic relationships implies that contrary to what is widely claimed in the taxonomic literature, it is range fragmentation, as opposed to a coastal-to-mountain ecological shift, that is likely the main driver of diversification. Copyright © 2016 Elsevier Inc. All rights reserved.

The fruit cuticles of wild tomato species exhibit architectural and chemical diversity, providing a new model for studying the evolution of cuticle function

PubMed Central

Yeats, Trevor H.; Buda, Gregory J.; Wang, Zhonghua; Chehanovsky, Noam; Moyle, Leonie C.; Jetter, Reinhard; Schaffer, Arthur A.; Rose, Jocelyn K.C.

2013-01-01

Summary The cuticle covers the aerial epidermis of land plants and plays a primary role in water regulation and protection from external stresses. Remarkable species diversity in the structure and composition of its components, cutin and wax, have been catalogued, but few functional or genetic correlations have emerged. Tomato (Solanum lycopersicum) is part of a complex of closely related wild species endemic to the northern Andes and the Galapagos Islands (Solanum Sect. Lycopersicon). Although sharing an ancestor less than seven million years ago, these species are found in diverse environments and are subject to unique selective pressures. Furthermore, they are genetically tractable, since they can be crossed with S. lycopersicum, which has a sequenced genome. With the aim of evaluating the relationships between evolution, structure and function of the cuticle, we characterized the morphological and chemical diversity of fruit cuticles of seven species from Solanum Sect. Lycopersicon. Striking differences in cuticular architecture and quantities of cutin and waxes were observed, with wild species wax coverage exceeding that of S. lycopersicum by up to seven fold. Wax composition varied in the occurrence of wax esters and triterpenoid isomers. Using a S. habrochaites introgression line population, we mapped triterpenoid differences to a genomic region that includes two S. lycopersicum triterpene synthases. Based on known metabolic pathways for acyl wax compounds, hypotheses are discussed to explain the appearance of wax esters with atypical chain lengths. These results establish a model system for understanding the ecological and evolutionary functional genomics of plant cuticles. PMID:22007785

Application of single- and dual-energy CT brain tissue segmentation to PET monitoring of proton therapy

NASA Astrophysics Data System (ADS)

Berndt, Bianca; Landry, Guillaume; Schwarz, Florian; Tessonnier, Thomas; Kamp, Florian; Dedes, George; Thieke, Christian; Würl, Matthias; Kurz, Christopher; Ganswindt, Ute; Verhaegen, Frank; Debus, Jürgen; Belka, Claus; Sommer, Wieland; Reiser, Maximilian; Bauer, Julia; Parodi, Katia

2017-03-01

The purpose of this work was to evaluate the ability of single and dual energy computed tomography (SECT, DECT) to estimate tissue composition and density for usage in Monte Carlo (MC) simulations of irradiation induced β + activity distributions. This was done to assess the impact on positron emission tomography (PET) range verification in proton therapy. A DECT-based brain tissue segmentation method was developed for white matter (WM), grey matter (GM) and cerebrospinal fluid (CSF). The elemental composition of reference tissues was assigned to closest CT numbers in DECT space (DECTdist). The method was also applied to SECT data (SECTdist). In a validation experiment, the proton irradiation induced PET activity of three brain equivalent solutions (BES) was compared to simulations based on different tissue segmentations. Five patients scanned with a dual source DECT scanner were analyzed to compare the different segmentation methods. A single magnetic resonance (MR) scan was used for comparison with an established segmentation toolkit. Additionally, one patient with SECT and post-treatment PET scans was investigated. For BES, DECTdist and SECTdist reduced differences to the reference simulation by up to 62% when compared to the conventional stoichiometric segmentation (SECTSchneider). In comparison to MR brain segmentation, Dice similarity coefficients for WM, GM and CSF were 0.61, 0.67 and 0.66 for DECTdist and 0.54, 0.41 and 0.66 for SECTdist. MC simulations of PET treatment verification in patients showed important differences between DECTdist/SECTdist and SECTSchneider for patients with large CSF areas within the treatment field but not in WM and GM. Differences could be misinterpreted as PET derived range shifts of up to 4 mm. DECTdist and SECTdist yielded comparable activity distributions, and comparison of SECTdist to a measured patient PET scan showed improved agreement when compared to SECTSchneider. The agreement between predicted and measured PET activity distributions was improved by employing a brain specific segmentation applicable to both DECT and SECT data.

Metallic artefact reduction with monoenergetic dual-energy CT: systematic ex vivo evaluation of posterior spinal fusion implants from various vendors and different spine levels.

PubMed

Guggenberger, R; Winklhofer, S; Osterhoff, G; Wanner, G A; Fortunati, M; Andreisek, G; Alkadhi, H; Stolzmann, P

2012-11-01

To evaluate optimal monoenergetic dual-energy computed tomography (DECT) settings for artefact reduction of posterior spinal fusion implants of various vendors and spine levels. Posterior spinal fusion implants of five vendors for cervical, thoracic and lumbar spine were examined ex vivo with single-energy (SE) CT (120 kVp) and DECT (140/100 kVp). Extrapolated monoenergetic DECT images at 64, 69, 88, 105 keV and individually adjusted monoenergy for optimised image quality (OPTkeV) were generated. Two independent radiologists assessed quantitative and qualitative image parameters for each device and spine level. Inter-reader agreements of quantitative and qualitative parameters were high (ICC = 0.81-1.00, κ = 0.54-0.77). HU values of spinal fusion implants were significantly different among vendors (P < 0.001), spine levels (P < 0.01) and among SECT, monoenergetic DECT of 64, 69, 88, 105 keV and OPTkeV (P < 0.01). Image quality was significantly (P < 0.001) different between datasets and improved with higher monoenergies of DECT compared with SECT (V = 0.58, P < 0.001). Artefacts decreased significantly (V = 0.51, P < 0.001) at higher monoenergies. OPTkeV values ranged from 123-141 keV. OPTkeV according to vendor and spine level are presented herein. Monoenergetic DECT provides significantly better image quality and less metallic artefacts from implants than SECT. Use of individual keV values for vendor and spine level is recommended. • Artefacts pose problems for CT following posterior spinal fusion implants. • CT images are interpreted better with monoenergetic extrapolation using dual-energy (DE) CT. • DECT extrapolation improves image quality and reduces metallic artefacts over SECT. • There were considerable differences in monoenergy values among vendors and spine levels. • Use of individualised monoenergy values is indicated for different metallic hardware devices.

[Social security law and evidence-based health care in Germany].

PubMed

Welti, Felix

2007-01-01

The present contribution examines whether German Social Security Law requires or allows the German health care system to follow the principles of evidence-based health care. The discussion will be based on the relevant example of statutory health insurance (Book of Social Code V-SGB V). According to Sect. 2 SGB V health care provision has to follow medical standards, acknowledging medical progress. It has to be effective and efficient. Special therapies are not outlawed, but also have to follow these principles. Efficiency is defined (Sect. 12 SGB V) by the benefits being sufficient and necessary. The responsibility for achieving these goals and supplying the benefits for all people according to need lies with the health care insurance funds along with the physicians' associations (Kassenirztliche Vereinigung) and the hospitals (Sect. 70 SGB V). These organisations cooperate in the Federal Joint Committee (Gemeinsamer Bundesausschuss, G-BA, Sect. 92 SGB V), where they have to hear organisations of patients and of the disabled also. The G-BA is allowed by law to exclude therapies not meeting the SGB V criteria. The Institute for Quality and Efficiency in Health Care (IQWiG) advises the G-BA and is also responsible for generating evidence. A major political and constitutional controversy has been triggered on the legitimation of the Federal Joint Committee. In its statute the G-BA recurs on evidence-based health care. It examines therapies according to the degree of available evidence and the usability of the evidence in the respective supply setting. The Federal Social Court (Bundessozialgericht, BSG) decided that the decisions of the G-BA could not be challenged for being medically incorrect. In 2005, the Federal Constitutional Court (Bundesverfassungsgericht-BVerfG) decided that a stricter control over the G-BA by the social courts was needed and that in the case of serious disease a lower evidence level might be sufficient. BSG and G-BA will continue to accept the results and methods of Evidence-based Medicine.

The evolutionary history of Eugenia sect. Phyllocalyx (Myrtaceae) corroborates historically stable areas in the southern Atlantic forests

PubMed Central

de Oliveira Bünger, Mariana; Fernanda Mazine, Fiorella; Forest, Félix; Leandro Bueno, Marcelo; Renato Stehmann, João; Lucas, Eve J.

2016-01-01

Background and Aims Eugenia sect. Phyllocalyx Nied. includes 14 species endemic to the Neotropics, mostly distributed in the Atlantic coastal forests of Brazil. Here the first comprehensive phylogenetic study of this group is presented, and this phylogeny is used as the basis to evaluate the recent infrageneric classification in Eugenia sensu lato (s.l.) to test the history of the evolution of traits in the group and test hypotheses associated with the history of this clade. Methods A total of 42 taxa were sampled, of which 14 were Eugenia sect. Phyllocalyx for one nuclear (ribosomal internal transcribed spacer) and four plastid markers (psbA-trnH, rpl16, trnL-rpl32 and trnQ-rps16). The relationships were reconstructed based on Bayesian analysis and maximum likelihood. Additionally, ancestral area analysis and modelling methods were used to estimate species dispersal, comparing historically climatic stable (refuges) and unstable areas. Key Results Maximum likelihood and Bayesian inferences indicate that Eugenia sect. Phyllocalyx is paraphyletic and the two clades recovered are characterized by combinations of morphological characters. Phylogenetic relationships support a link between Cerrado and south-eastern species and a difference in the composition of species from north-eastern and south-eastern Atlantic forest. Refugia and stable areas identified within unstable areas suggest that these areas were important to maintain diversity in the Atlantic forest biodiversity hotspot. Conclusion This study provides a robust phylogenetic framework to address important historical questions for Eugenia s.l. within an evolutionary context, supporting the need for better taxonomic study of one of the largest genera in the Neotropics. Furthermore, valuable insight is offered into diversification and biome shifts of plant species in the highly environmentally impacted Atlantic forest of South America. Evidence is presented that climate stability in the south-eastern Atlantic forest during the Quaternary contributed to the highest levels of plant diversity in this region that acted as a refugium. PMID:27974324

Thunder among the pines: defining a pan-Asian soma.

PubMed

Dannaway, Frederick

2009-03-01

Many ancient cultures and religions engaged in various techniques and used various substances to instigate religious experience and to alter perception. These techniques of psycho-sexual drug yoga reached an unparalleled level of sophistication that arose and was often cloaked in practical terms of alchemy and metallurgy. The Vedic tradition describes this plant-based ritualism as soma, which has been identified by Gordon Wasson as the mushroom Amanita muscaria. This article traces these soma-influenced sects of esoteric Buddhism that exerted influences from India, China and Tibet to Japan. Some of the key components, practices and symbolism are retained despite numerous cultural filters. Japan's tradition of esoteric Buddhism can thus be seen to have preserved and incorporated the soma/amrita mushroom lore into its own traditions of mountain ascetic mystics.

The "Bestie di Satana" murders.

PubMed

Birkhoff, Jutta; Candelli, Chiara; Zeroli, Stefania; La Tegola, Donatella; Carabellese, Felice

2013-11-01

In recent years, satanic groups have been responsible for various types and degrees of crimes. We report the case of a number of murders committed in Italy by a group of young people calling themselves the "Bestie di Satana". Forensic psychiatric assessment of the members of a satanic sect charged with the crime revealed that all the young people had a fragile, immature personality, a very low level of education and were socially disadvantaged. The trial of the members of the "Bestie di Satana" sect was concluded with the verdict of deliberate murder, and all the members were given long jail sentences. This report should lead us to explore social and cultural responses to juvenile satanism, statistically shown to be a relatively rare phenomenon but with a high criminal potential. © 2013 American Academy of Forensic Sciences.

Phylogenetic fragrance patterns in Nicotiana sections Alatae and Suaveolentes.

PubMed

Raguso, Robert A; Schlumpberger, Boris O; Kaczorowski, Rainee L; Holtsford, Timothy P

2006-09-01

We analyzed floral volatiles from eight tobacco species (Nicotiana; Solanaceae) including newly discovered Brazilian taxa (Nicotiana mutabilis and "Rastroensis") in section Alatae. Eighty-four compounds were found, including mono- and sesquiterpenoids, nitrogenous compounds, benzenoid and aliphatic alcohols, aldehydes and esters. Floral scent from recent accessions of Nicotiana alata, Nicotiana bonariensis and Nicotiana langsdorffii differed from previously published data, suggesting intraspecific variation in scent composition at the level of biosynthetic class. Newly discovered taxa in Alatae, like their relatives, emit large amounts of 1,8-cineole and smaller amounts of monoterpenes on a nocturnal rhythm, constituting a chemical synapomorphy for this lineage. Fragrance data from three species of Nicotiana sect. Suaveolentes, the sister group of Alatae, (two Australian species: N. cavicola, N. ingulba; one African species: N. africana), were compared to previously reported data from their close relative, N. suaveolens. Like N. suaveolens, N. cavicola and N. ingulba emit fragrances dominated by benzenoids and phenylpropanoids, whereas the flowers of N. africana lacked a distinct floral scent and instead emitted only small amounts of an aliphatic methyl ester from foliage. Interestingly, this ester also is emitted from foliage of N. longiflora and N. plumbaginifolia (both in section Alatae s.l.), which share a common ancestor with N. africana. This result, combined with the synapomorphic pattern of 1,8 cineole emission in Alatae s.s., suggests that phylogenetic signal explains a major component of fragrance composition among tobacco species in sections Alatae and Suaveolentes. At the intraspecific level, interpopulational scent variation is widespread in sect. Alatae, and may reflect edaphic specialization, introgression, local pollinator shifts, genetic drift or artificial selection in cultivation. Further studies with genetically and geographically well-defined populations are needed to distinguish between these possibilities.

TH-CD-202-05: DECT Based Tissue Segmentation as Input to Monte Carlo Simulations for Proton Treatment Verification Using PET Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berndt, B; Wuerl, M; Dedes, G

Purpose: To improve agreement of predicted and measured positron emitter yields in patients, after proton irradiation for PET-based treatment verification, using a novel dual energy CT (DECT) tissue segmentation approach, overcoming known deficiencies from single energy CT (SECT). Methods: DECT head scans of 5 trauma patients were segmented and compared to existing decomposition methods with a first focus on the brain. For validation purposes, three brain equivalent solutions [water, white matter (WM) and grey matter (GM) – equivalent with respect to their reference carbon and oxygen contents and CT numbers at 90kVp and 150kVp] were prepared from water, ethanol, sucrosemore » and salt. The activities of all brain solutions, measured during a PET scan after uniform proton irradiation, were compared to Monte Carlo simulations. Simulation inputs were various solution compositions obtained from different segmentation approaches from DECT, SECT scans, and known reference composition. Virtual GM solution salt concentration corrections were applied based on DECT measurements of solutions with varying salt concentration. Results: The novel tissue segmentation showed qualitative improvements in %C for patient brain scans (ground truth unavailable). The activity simulations based on reference solution compositions agree with the measurement within 3–5% (4–8Bq/ml). These reference simulations showed an absolute activity difference between WM (20%C) and GM (10%C) to H2O (0%C) of 43 Bq/ml and 22 Bq/ml, respectively. Activity differences between reference simulations and segmented ones varied from −6 to 1 Bq/ml for DECT and −79 to 8 Bq/ml for SECT. Conclusion: Compared to the conventionally used SECT segmentation, the DECT based segmentation indicates a qualitative and quantitative improvement. In controlled solutions, a MC input based on DECT segmentation leads to better agreement with the reference. Future work will address the anticipated improvement of quantification accuracy in patients, comparing different tissue decomposition methods with an MR brain segmentation. Acknowledgement: DFG-MAP and HIT-Heidelberg Deutsche Forschungsgemeinschaft (MAP); Bundesministerium fur Bildung und Forschung (01IB13001)« less

Monte Carlo proton dose calculations using a radiotherapy specific dual-energy CT scanner for tissue segmentation and range assessment

NASA Astrophysics Data System (ADS)

Almeida, Isabel P.; Schyns, Lotte E. J. R.; Vaniqui, Ana; van der Heyden, Brent; Dedes, George; Resch, Andreas F.; Kamp, Florian; Zindler, Jaap D.; Parodi, Katia; Landry, Guillaume; Verhaegen, Frank

2018-06-01

Proton beam ranges derived from dual-energy computed tomography (DECT) images from a dual-spiral radiotherapy (RT)-specific CT scanner were assessed using Monte Carlo (MC) dose calculations. Images from a dual-source and a twin-beam DECT scanner were also used to establish a comparison to the RT-specific scanner. Proton ranges extracted from conventional single-energy CT (SECT) were additionally performed to benchmark against literature values. Using two phantoms, a DECT methodology was tested as input for GEANT4 MC proton dose calculations. Proton ranges were calculated for different mono-energetic proton beams irradiating both phantoms; the results were compared to the ground truth based on the phantom compositions. The same methodology was applied in a head-and-neck cancer patient using both SECT and dual-spiral DECT scans from the RT-specific scanner. A pencil-beam-scanning plan was designed, which was subsequently optimized by MC dose calculations, and differences in proton range for the different image-based simulations were assessed. For phantoms, the DECT method yielded overall better material segmentation with  >86% of the voxel correctly assigned for the dual-spiral and dual-source scanners, but only 64% for a twin-beam scanner. For the calibration phantom, the dual-spiral scanner yielded range errors below 1.2 mm (0.6% of range), like the errors yielded by the dual-source scanner (<1.1 mm, <0.5%). With the validation phantom, the dual-spiral scanner yielded errors below 0.8 mm (0.9%), whereas SECT yielded errors up to 1.6 mm (2%). For the patient case, where the absolute truth was missing, proton range differences between DECT and SECT were on average in  ‑1.2  ±  1.2 mm (‑0.5%  ±  0.5%). MC dose calculations were successfully performed on DECT images, where the dual-spiral scanner resulted in media segmentation and range accuracy as good as the dual-source CT. In the patient, the various methods showed relevant range differences.

The evolutionary history of Eugenia sect. Phyllocalyx (Myrtaceae) corroborates historically stable areas in the southern Atlantic forests.

PubMed

de Oliveira Bünger, Mariana; Fernanda Mazine, Fiorella; Forest, Félix; Leandro Bueno, Marcelo; Renato Stehmann, João; Lucas, Eve J

2016-12-01

Eugenia sect. Phyllocalyx Nied. includes 14 species endemic to the Neotropics, mostly distributed in the Atlantic coastal forests of Brazil. Here the first comprehensive phylogenetic study of this group is presented, and this phylogeny is used as the basis to evaluate the recent infrageneric classification in Eugenia sensu lato (s.l.) to test the history of the evolution of traits in the group and test hypotheses associated with the history of this clade. A total of 42 taxa were sampled, of which 14 were Eugenia sect. Phyllocalyx for one nuclear (ribosomal internal transcribed spacer) and four plastid markers (psbA-trnH, rpl16, trnL-rpl32 and trnQ-rps16). The relationships were reconstructed based on Bayesian analysis and maximum likelihood. Additionally, ancestral area analysis and modelling methods were used to estimate species dispersal, comparing historically climatic stable (refuges) and unstable areas. Maximum likelihood and Bayesian inferences indicate that Eugenia sect. Phyllocalyx is paraphyletic and the two clades recovered are characterized by combinations of morphological characters. Phylogenetic relationships support a link between Cerrado and south-eastern species and a difference in the composition of species from north-eastern and south-eastern Atlantic forest. Refugia and stable areas identified within unstable areas suggest that these areas were important to maintain diversity in the Atlantic forest biodiversity hotspot. This study provides a robust phylogenetic framework to address important historical questions for Eugenia s.l. within an evolutionary context, supporting the need for better taxonomic study of one of the largest genera in the Neotropics. Furthermore, valuable insight is offered into diversification and biome shifts of plant species in the highly environmentally impacted Atlantic forest of South America. Evidence is presented that climate stability in the south-eastern Atlantic forest during the Quaternary contributed to the highest levels of plant diversity in this region that acted as a refugium. © The Authors 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Helping Residents Protect Water Sources

EPA Pesticide Factsheets

Building on the successful early engagement of the Plain Sect agricultural community, the Eastern Lancaster County Source Water Protection Collaborative is expanding its efforts to involve local residents in the work of protecting drinking water sources.

Data mining the Kansas traffic-crash database : summary.

DOT National Transportation Integrated Search

2009-08-01

Traffic crashes results from the interaction of different parameters which includes highway geometrics, traffic : characteristics and human factors. Geometric variables include number of lanes, lane width, median width, shoulder : width, roadway sect...

Corolla morphology influences diversification rates in bifid toadflaxes (Linaria sect. Versicolores)

PubMed Central

Fernández-Mazuecos, Mario; Blanco-Pastor, José Luis; Gómez, José M.; Vargas, Pablo

2013-01-01

Background and Aims The role of flower specialization in plant speciation and evolution remains controversial. In this study the evolution of flower traits restricting access to pollinators was analysed in the bifid toadflaxes (Linaria sect. Versicolores), a monophyletic group of ∼30 species and subspecies with highly specialized corollas. Methods A time-calibrated phylogeny based on both nuclear and plastid DNA sequences was obtained using a coalescent-based method, and flower morphology was characterized by means of morphometric analyses. Directional trends in flower shape evolution and trait-dependent diversification rates were jointly analysed using recently developed methods, and morphological shifts were reconstructed along the phylogeny. Pollinator surveys were conducted for a representative sample of species. Key Results A restrictive character state (narrow corolla tube) was reconstructed in the most recent common ancestor of Linaria sect. Versicolores. After its early loss in the most species-rich clade, this character state has been convergently reacquired in multiple lineages of this clade in recent times, yet it seems to have exerted a negative influence on diversification rates. Comparative analyses and pollinator surveys suggest that the narrow- and broad-tubed flowers are evolutionary optima representing divergent strategies of pollen placement on nectar-feeding insects. Conclusions The results confirm that different forms of floral specialization can lead to dissimilar evolutionary success in terms of diversification. It is additionally suggested that opposing individual-level and species-level selection pressures may have driven the evolution of pollinator-restrictive traits in bifid toadflaxes. PMID:24142920

Hedysarum L. (Fabaceae: Hedysareae) Is Not Monophyletic – Evidence from Phylogenetic Analyses Based on Five Nuclear and Five Plastid Sequences

PubMed Central

Liu, Pei-Liang; Wen, Jun; Duan, Lei; Arslan, Emine; Ertuğrul, Kuddisi; Chang, Zhao-Yang

2017-01-01

The legume family (Fabaceae) exhibits a high level of species diversity and evolutionary success worldwide. Previous phylogenetic studies of the genus Hedysarum L. (Fabaceae: Hedysareae) showed that the nuclear and the plastid topologies might be incongruent, and the systematic position of the Hedysarum sect. Stracheya clade was uncertain. In this study, phylogenetic relationships of Hedysarum were investigated based on the nuclear ITS, ETS, PGDH, SQD1, TRPT and the plastid psbA-trnH, trnC-petN, trnL-trnF, trnS-trnG, petN-psbM sequences. Both nuclear and plastid data support two major lineages in Hedysarum: the Hedysarum s.s. clade and the Sartoria clade. In the nuclear tree, Hedysarum is biphyletic with the Hedysarum s.s. clade sister to the Corethrodendron + Eversmannia + Greuteria + Onobrychis clade (the CEGO clade), whereas the Sartoria clade is sister to the genus Taverniera DC. In the plastid tree, Hedysarum is monophyletic and sister to Taverniera. The incongruent position of the Hedysarum s.s. clade between the nuclear and plastid trees may be best explained by a chloroplast capture hypothesis via introgression. The Hedysarum sect. Stracheya clade is resolved as sister to the H. sect. Hedysarum clade in both nuclear and plastid trees, and our analyses support merging Stracheya into Hedysarum. Based on our new evidence from multiple sequences, Hedysarum is not monophyletic, and its generic delimitation needs to be reconsidered. PMID:28122062

Hedysarum L. (Fabaceae: Hedysareae) Is Not Monophyletic - Evidence from Phylogenetic Analyses Based on Five Nuclear and Five Plastid Sequences.

PubMed

Liu, Pei-Liang; Wen, Jun; Duan, Lei; Arslan, Emine; Ertuğrul, Kuddisi; Chang, Zhao-Yang

2017-01-01

The legume family (Fabaceae) exhibits a high level of species diversity and evolutionary success worldwide. Previous phylogenetic studies of the genus Hedysarum L. (Fabaceae: Hedysareae) showed that the nuclear and the plastid topologies might be incongruent, and the systematic position of the Hedysarum sect. Stracheya clade was uncertain. In this study, phylogenetic relationships of Hedysarum were investigated based on the nuclear ITS, ETS, PGDH, SQD1, TRPT and the plastid psbA-trnH, trnC-petN, trnL-trnF, trnS-trnG, petN-psbM sequences. Both nuclear and plastid data support two major lineages in Hedysarum: the Hedysarum s.s. clade and the Sartoria clade. In the nuclear tree, Hedysarum is biphyletic with the Hedysarum s.s. clade sister to the Corethrodendron + Eversmannia + Greuteria + Onobrychis clade (the CEGO clade), whereas the Sartoria clade is sister to the genus Taverniera DC. In the plastid tree, Hedysarum is monophyletic and sister to Taverniera. The incongruent position of the Hedysarum s.s. clade between the nuclear and plastid trees may be best explained by a chloroplast capture hypothesis via introgression. The Hedysarum sect. Stracheya clade is resolved as sister to the H. sect. Hedysarum clade in both nuclear and plastid trees, and our analyses support merging Stracheya into Hedysarum. Based on our new evidence from multiple sequences, Hedysarum is not monophyletic, and its generic delimitation needs to be reconsidered.

Entoloma subgenus Leptonia in boreal-temperate Eurasia: towards a phylogenetic species concept.

PubMed

Morozova, O V; Noordeloos, M E; Vila, J

2014-06-01

This study reveals the concordance, or lack thereof, between morphological and phylogenetic species concepts within Entoloma subg. Leptonia in boreal-temperate Eurasia, combining a critical morphological examination with a multigene phylogeny based on nrITS, nrLSU and mtSSU sequences. A total of 16 taxa was investigated. Emended concepts of subg. Leptonia and sect. Leptonia as well as the new sect. Dichroi are presented. Two species (Entoloma percoelestinum and E. sublaevisporum) and one variety (E. tjallingiorum var. laricinum) are described as new to science. On the basis of the morphological and phylogenetical evidence E. alnetorum is reduced to a variety of E. tjallingiorum, and E. venustum is considered a variety of E. callichroum. Accordingly, the new combinations E. tjallingiorum var. alnetorum and E. callichroum var. venustum are proposed. Entoloma lepidissimum var. pauciangulatum is now treated as a synonym of E. chytrophilum. Neotypes for E. dichroum, E. euchroum and E. lampropus are designated.

Quantum Information Theory - an Invitation

NASA Astrophysics Data System (ADS)

Werner, Reinhard F.

Quantum information and quantum computers have received a lot of public attention recently. Quantum computers have been advertised as a kind of warp drive for computing, and indeed the promise of the algorithms of Shor and Grover is to perform computations which are extremely hard or even provably impossible on any merely ``classical'' computer.In this article I shall give an account of the basic concepts of quantum information theory is given, staying as much as possible in the area of general agreement.The article is divided into two parts. The first (up to the end of Sect. 2.5) is mostly in plain English, centered around the exploration of what can or cannot be done with quantum systems as information carriers. The second part, Sect. 2.6, then gives a description of the mathematical structures and of some of the tools needed to develop the theory.

Clarifying the butter Boletes: a new genus, Butyriboletus, is established to accommodate Boletus sect. Appendiculati, and six new species are described.

PubMed

Arora, David; Frank, Jonathan L

2014-01-01

The butter boletes (Boletus s.l. sect. Appendiculati) are an economically important group of ectomycorrhizal fungi whose basidiocarps have a yellow tube layer that often bruises blue, yellow reticulate stipe, mild flavor and firm yellow-tinged flesh that may or may not turn blue when exposed. Morphological characters and molecular data (ITS and LSU) place this group in a separate phylogenetic clade from Boletus sensu stricto. Here we establish a new genus, Butyriboletus, to accommodate 14 species of butter boletes that range from Asia to Europe, north Africa and North America. We recombine eight previously described butter bolete species and we describe six new species: four from western USA (Bu. persolidus, Bu. primiregius, Bu. autumnigius, Bu. querciregius) and two from Yunnan, China (Bu. yicibus, Bu. sanicibus). © 2014 by The Mycological Society of America.

Phylogenetic Analysis of a ‘Jewel Orchid’ Genus Goodyera (Orchidaceae) Based on DNA Sequence Data from Nuclear and Plastid Regions

PubMed Central

Hu, Chao; Tian, Huaizhen; Li, Hongqing; Hu, Aiqun; Xing, Fuwu; Bhattacharjee, Avishek; Hsu, Tianchuan; Kumar, Pankaj; Chung, Shihwen

2016-01-01

A molecular phylogeny of Asiatic species of Goodyera (Orchidaceae, Cranichideae, Goodyerinae) based on the nuclear ribosomal internal transcribed spacer (ITS) region and two chloroplast loci (matK and trnL-F) was presented. Thirty-five species represented by 132 samples of Goodyera were analyzed, along with other 27 genera/48 species, using Pterostylis longifolia and Chloraea gaudichaudii as outgroups. Bayesian inference, maximum parsimony and maximum likelihood methods were used to reveal the intrageneric relationships of Goodyera and its intergeneric relationships to related genera. The results indicate that: 1) Goodyera is not monophyletic; 2) Goodyera could be divided into four sections, viz., Goodyera, Otosepalum, Reticulum and a new section; 3) sect. Reticulum can be further divided into two subsections, viz., Reticulum and Foliosum, whereas sect. Goodyera can in turn be divided into subsections Goodyera and a new subsection. PMID:26927946

Phylogenetic Analysis of a 'Jewel Orchid' Genus Goodyera (Orchidaceae) Based on DNA Sequence Data from Nuclear and Plastid Regions.

PubMed

Hu, Chao; Tian, Huaizhen; Li, Hongqing; Hu, Aiqun; Xing, Fuwu; Bhattacharjee, Avishek; Hsu, Tianchuan; Kumar, Pankaj; Chung, Shihwen

2016-01-01

A molecular phylogeny of Asiatic species of Goodyera (Orchidaceae, Cranichideae, Goodyerinae) based on the nuclear ribosomal internal transcribed spacer (ITS) region and two chloroplast loci (matK and trnL-F) was presented. Thirty-five species represented by 132 samples of Goodyera were analyzed, along with other 27 genera/48 species, using Pterostylis longifolia and Chloraea gaudichaudii as outgroups. Bayesian inference, maximum parsimony and maximum likelihood methods were used to reveal the intrageneric relationships of Goodyera and its intergeneric relationships to related genera. The results indicate that: 1) Goodyera is not monophyletic; 2) Goodyera could be divided into four sections, viz., Goodyera, Otosepalum, Reticulum and a new section; 3) sect. Reticulum can be further divided into two subsections, viz., Reticulum and Foliosum, whereas sect. Goodyera can in turn be divided into subsections Goodyera and a new subsection.

Aspergillus asper sp. nov. and Aspergillus collinsii sp. nov., from Aspergillus section Usti.

PubMed

Jurjevic, Zeljko; Peterson, Stephen W

2016-07-01

In sampling fungi from the built environment, two isolates that could not confidently be placed in described species were encountered. Phenotypic analysis suggested that they belonged in Aspergillus sect. Usti. In order to verify the sectional placement and to assure that they were undescribed rather than phenotypically aberrant isolates, DNA was isolated and sequenced at the beta-tubulin, calmodulin, internal transcribed spacer and RNA polymerase II loci and sequences compared with those from other species in the genus Aspergillus. At each locus, each new isolate was distant from existing species. Phylogenetic trees calculated from these data and GenBank data for species of the section Usti excluded the placement of these isolates in existing species, with statistical support. Because they were excluded from existing taxa, the distinct species Aspergillus asper (type strain NRRL 35910 T ) and Aspergillus collinsii (type strain NRRL 66196 T ) in sect. Usti are proposed to accommodate these strains.

Study of three interesting Amanita species from Thailand: Morphology, multiple-gene phylogeny and toxin analysis

PubMed Central

Thongbai, Benjarong; Miller, Steven L.; Stadler, Marc; Wittstein, Kathrin; Hyde, Kevin D.; Lumyong, Saisamorn

2017-01-01

Amanita ballerina and A. brunneitoxicaria spp. nov. are introduced from Thailand. Amanita fuligineoides is also reported for the first time from Thailand, increasing the known distribution of this taxon. Together, those findings support our view that many taxa are yet to be discovered in the region. While both morphological characters and a multiple-gene phylogeny clearly place A. brunneitoxicaria and A. fuligineoides in sect. Phalloideae (Fr.) Quél., the placement of A. ballerina is problematic. On the one hand, the morphology of A. ballerina shows clear affinities with stirps Limbatula of sect. Lepidella. On the other hand, in a multiple-gene phylogeny including taxa of all sections in subg. Lepidella, A. ballerina and two other species, including A. zangii, form a well-supported clade sister to the Phalloideae sensu Bas 1969, which include the lethal “death caps” and “destroying angels”. Together, the A. ballerina-A. zangii clade and the Phalloideae sensu Bas 1969 also form a well-supported clade. We therefore screened for two of the most notorious toxins by HPLC-MS analysis of methanolic extracts from the basidiomata. Interestingly, neither α-amanitin nor phalloidin was found in A. ballerina, whereas Amanita fuligineoides was confirmed to contain both α-amanitin and phalloidin, and A. brunneitoxicaria contained only α-amanitin. Together with unique morphological characteristics, the position in the phylogeny indicates that A. ballerina is either an important link in the evolution of the deadly Amanita sect. Phalloideae species, or a member of a new section also including A. zangii. PMID:28767681

Poster — Thur Eve — 14: Improving Tissue Segmentation for Monte Carlo Dose Calculation using DECT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Salvio, A.; Bedwani, S.; Carrier, J-F.

2014-08-15

Purpose: To improve Monte Carlo dose calculation accuracy through a new tissue segmentation technique with dual energy CT (DECT). Methods: Electron density (ED) and effective atomic number (EAN) can be extracted directly from DECT data with a stoichiometric calibration method. Images are acquired with Monte Carlo CT projections using the user code egs-cbct and reconstructed using an FDK backprojection algorithm. Calibration is performed using projections of a numerical RMI phantom. A weighted parameter algorithm then uses both EAN and ED to assign materials to voxels from DECT simulated images. This new method is compared to a standard tissue characterization frommore » single energy CT (SECT) data using a segmented calibrated Hounsfield unit (HU) to ED curve. Both methods are compared to the reference numerical head phantom. Monte Carlo simulations on uniform phantoms of different tissues using dosxyz-nrc show discrepancies in depth-dose distributions. Results: Both SECT and DECT segmentation methods show similar performance assigning soft tissues. Performance is however improved with DECT in regions with higher density, such as bones, where it assigns materials correctly 8% more often than segmentation with SECT, considering the same set of tissues and simulated clinical CT images, i.e. including noise and reconstruction artifacts. Furthermore, Monte Carlo results indicate that kV photon beam depth-dose distributions can double between two tissues of density higher than muscle. Conclusions: A direct acquisition of ED and the added information of EAN with DECT data improves tissue segmentation and increases the accuracy of Monte Carlo dose calculation in kV photon beams.« less

Large-spored Alternaria pathogens in section Porri disentangled

PubMed Central

Woudenberg, J.H.C.; Truter, M.; Groenewald, J.Z.; Crous, P.W.

2014-01-01

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens (e.g. Alternaria porri, A. solani and A. tomatophila). We constructed a multi-gene phylogeny on parts of the ITS, GAPDH, RPB2, TEF1 and Alt a 1 gene regions, which, supplemented with morphological and cultural studies, forms the basis for species recognition in sect. Porri. Our data reveal 63 species, of which 10 are newly described in sect. Porri, and 27 species names are synonymised. The three known Alternaria pathogens causing early blight on tomato all cluster in one clade, and are synonymised under the older name, A. linariae. Alternaria protenta, a species formerly only known as pathogen on Helianthus annuus, is also reported to cause early blight of potato, together with A. solani and A. grandis. Two clades with isolates causing purple blotch of onion are confirmed as A. allii and A. porri, but the two species cannot adequately be distinguished based on the number of beaks and branches as suggested previously. This is also found among the pathogens of Passifloraceae, which are reduced from four to three species. In addition to the known pathogen of sweet potato, A. bataticola, three more species are delineated of which two are newly described. A new Alternaria section is also described, comprising two large-spored Alternaria species with concatenate conidia. PMID:25492985

Large-spored Alternaria pathogens in section Porri disentangled.

PubMed

Woudenberg, J H C; Truter, M; Groenewald, J Z; Crous, P W

2014-09-01

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens (e.g. Alternaria porri, A. solani and A. tomatophila). We constructed a multi-gene phylogeny on parts of the ITS, GAPDH, RPB2, TEF1 and Alt a 1 gene regions, which, supplemented with morphological and cultural studies, forms the basis for species recognition in sect. Porri. Our data reveal 63 species, of which 10 are newly described in sect. Porri, and 27 species names are synonymised. The three known Alternaria pathogens causing early blight on tomato all cluster in one clade, and are synonymised under the older name, A. linariae. Alternaria protenta, a species formerly only known as pathogen on Helianthus annuus, is also reported to cause early blight of potato, together with A. solani and A. grandis. Two clades with isolates causing purple blotch of onion are confirmed as A. allii and A. porri, but the two species cannot adequately be distinguished based on the number of beaks and branches as suggested previously. This is also found among the pathogens of Passifloraceae, which are reduced from four to three species. In addition to the known pathogen of sweet potato, A. bataticola, three more species are delineated of which two are newly described. A new Alternaria section is also described, comprising two large-spored Alternaria species with concatenate conidia.

Confirmation of the Galactic thick disk component by the Basle RGU- and UBV-photometric space densities. Synopsis of 25 years Basle Halo Program. III - RGU + UBV: SA 82, SA 133, SA 57, SA 54

NASA Astrophysics Data System (ADS)

Fenkart, R.

1989-10-01

The stars in four fields of the Basle Halo Program (BHP), henceforth called "UBV-fields", had been (photographically) observed in RGU and in UBV, in order to treat their data in both photometric systems with the same stellar-statistical method for the determination of space density gradients, developed by Becker (1%5) for the RGU-fields of the BHP The purpose was to compare the corresponding results in both systems and to obtain an idea about their mutual performance with respect to this method. All four investigations (references in Tab. I) proved it to work about equally well in both systems, if the outcome is measured in terms of a relatively rough criterion, the so-called "mean misidentification-rate per system" (MMRS). In order to obtain a better founded view about the degree of equivalence of both systems with respect to their application for the three-colour photometrical purposes of the Basle programs, we decided to treat the UBV-fields in this third contribution to the present model-comparison synopsis, in RGU and in UBV, too, by comparing the total space densities observed in both systems with the five standard model gradients and according to the comparison method homogeneously used within the "comparison-phase" of the BHP which was initiated by del Rio and Fenkart (1987). In the appendix, as in paper I, the first contribution to this synopsis (Fenkart, 1989a), we give a full description of the comparison method, and the definition of the five standard models for the space density distribution in the Galaxy which are essentially three versions of the Bahcall-Soneira (1980) two-component model. BS II i(i = 1, 2, 3), as well as a three- and a four-component version of the Gilmore-Wyse (1985) model, without and with a Thick Disk component, GW III and GW IV respectively, together with their parameters in table In addition to that, paper I contains a full account of the almost 25 years old history of the BHP, of the motivation for this synopsis and of its general disposition; it is, therefore, recommended to be consulted, if a more detailed view of the whole project is desired. The present paper, after a short introduction (Sect. 1), is concerned with the extensive discussion of the comparison results for each of its four fields, in both photometric systems (Sect. 2), and summarizes, in section 3, the general findings which consist in the acknowledgement of a significantly better performance of the RGU-system with respect to the comparison procedure, and, overall, in the confirmation (SA 82, SA 57, SA 54), or at least not exclusion (SA 133) of the existence of a Thick Disk component in the involved directions.

Optimize pollutant emissions through adaptive highway management.

DOT National Transportation Integrated Search

2011-09-01

In this project, we investigated the possibility to reduce green house emission : (mainly CO2) from urban highways by adaptive ramp meter control. QUADSTONE : PARAMICS software was used to build a microscopic traffic model for a 4-lane highway : sect...

Continued monitoring of instrumented pavement in Ohio

DOT National Transportation Integrated Search

2003-12-01

Performance and environmental data continued to be monitored throughout this study on the Ohio SHRP Test Road. : Response testing included three new series of controlled vehicle tests and two sets of nondestructive tests. Cracking in two : SPS-2 sect...

Personality disorders in DSM-5: emerging research on the alternative model.

PubMed

Morey, Leslie C; Benson, Kathryn T; Busch, Alexander J; Skodol, Andrew E

2015-04-01

The current categorical classification of personality disorders, originally introduced in the Diagnostic and Statistical Manual of Mental Disorders (DSM-III), has been found to suffer from numerous shortcomings that hamper its usefulness for research and for clinical application. The Personality and Personality Disorders Work Group for DSM-5 was charged with developing an alternative model that would address many of these concerns. The developed model involved a hybrid dimensional/categorical model that represented personality disorders as combinations of core impairments in personality functioning with specific configurations of problematic personality traits. The Board of Trustees of the American Psychiatric Association did not accept the Task Force recommendation to implement this novel approach, and thus this alternative model was included in Sect. III of the DSM-5 among concepts requiring additional study. This review provides an overview of the emerging research on this alternative model, addressing each of the primary components of the model.

A revision of Boletellus sect. Ixocephali

Treesearch

Roy E. Halling; Beatriz Ortiz-Santana

2009-01-01

Taxa included in Boletellus section Ixocephali sensu Singer are re-evaluated and species limits are clarified in a morphological context. In this revision, we recognize four distinct morphological species: B. jalapensis, B. elatus, B. longicollis, and B. singerii. Among these, we have...

Swainsonine biosynthesis genes in diverse symbiotic and pathogenic fungi

USDA-ARS?s Scientific Manuscript database

Swainsonine, a cytotoxic fungal alkaloid and a potential cancer therapy drug, is produced by the insect pathogen and plant symbiont, Metarhizium robertsii, the clover pathogen Slafractonia leguminicola, locoweed symbionts belonging to Alternaria sect. Undifilum, and a recently discovered morning glo...

Religious perspectives on the nuclear weapons debate: excerpts from the bishops' pastoral letter on war and peace, proposed third draft

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The text of the third draft, issued in April 1983 and approved by the bishops on 3 May 1983, focuses on the morality of the use of nuclear weapons in a first strike, the threat to use them, and their use as a deterrent to war, but it also includes discussions of the just war theory, nonviolence, and peacemaking. Viewed in the context of the traditional modes of accommodation between religion and the state, and in the light of contemporary disharmony between more fundamentalist sects and modern science, the document affords an interesting point for discussion of the moral basesmore » of the uses of technology. More than simply a dogmatic statement of one religious organization, the pastoral letter represents a vigorous new current in moral discretion and responsibility. 114 references.« less

40 CFR 52.1770 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Particulates from Mica or Feldspar Processing Plants 04/01/03 09/17/03, 68 FR 54362 Sect .0510 Particulates..., approving Paragraph (g) excluding the following language: “excluding startups, shutdowns, maintenance... facilities producing ethanol by natural fermentation under the North American Industry Classification System...

40 CFR 52.1770 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

... .0509 Particulates from Mica or Feldspar Processing Plants 04/01/03 09/17/03, 68 FR 54362 Sect .0510... Paragraph (g). Also, approving Paragraph (g) excluding the following language: “excluding startups... production facilities producing ethanol by natural fermentation under the North American Industry...

40 CFR 52.1770 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Particulates from Mica or Feldspar Processing Plants 04/01/03 09/17/03, 68 FR 54362 Sect .0510 Particulates..., approving Paragraph (g) excluding the following language: “excluding startups, shutdowns, maintenance... facilities producing ethanol by natural fermentation under the North American Industry Classification System...

Remedial investigation/feasibility study of the Clinch River/Poplar Creek operable unit. Volume 1, main text

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document is the combined Remedial Investigation/Feasibility Study (RI/FS) Report for the Clinch River/Poplar Creek Operable Unit (CR/PC OU), an off-site OU associated with environmental restoration activities at the U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR). As a result of past, present, and potential future releases of hazardous substances into the environment, the ORR was placed on the National Priorities List in December 1989 (54 FR 48184). Sites on this list must be investigated for possible remedial action, as required by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA, 42 U.S.C. 9601, et seq.). This report documentsmore » the findings of the remedial investigation of this OU and the feasibility of potential remedial action alternatives. These studies are authorized by Sect. 117 of CERCLA and were conducted in accordance with the requirements of the National Contingency Plan (40 CFR Part 300). DOE, the U.S. Environmental Protection Agency (EPA), and the Tennessee Department of Environment and Conservation (TDEC) have entered into a Federal Facility Agreement (FFA), as authorized by Sect. 120 of CERCLA and Sects. 3008(h) and 6001 of the Resource Conservation and Recovery Act (RCRA) (42 U.S.C. 6901, et seq.). The purpose of this agreement is to ensure a coordinated and effective response for all environmental restoration activities occurring at the ORR. In addition to other responsibilities, the FFA parties mutually define the OU boundaries, set remediation priorities, establish remedial investigation priorities and strategies, and identify and select remedial actions. A copy of this FFA is available from the DOE Information Resource Center in Oak Ridge, Tennessee.« less

Ex vivo validation of a stoichiometric dual energy CT proton stopping power ratio calibration

NASA Astrophysics Data System (ADS)

Xie, Yunhe; Ainsley, Christopher; Yin, Lingshu; Zou, Wei; McDonough, James; Solberg, Timothy D.; Lin, Alexander; Teo, Boon-Keng Kevin

2018-03-01

A major source of uncertainty in proton therapy is the conversion of Hounsfield unit (HU) to proton stopping power ratio relative to water (SPR). In this study, we measured and quantified the accuracy of a stoichiometric dual energy CT (DECT) SPR calibration. We applied a stoichiometric DECT calibration method to derive the SPR using CT images acquired sequentially at 80 kVp and 140 kVp . The dual energy index was derived based on the HUs of the paired spectral images and used to calculate the effective atomic number (Z eff), relative electron density ({{ρ }e} ), and SPRs of phantom and biological materials. Two methods were used to verify the derived SPRs. The first method measured the sample’s water equivalent thicknesses to deduce the SPRs using a multi-layer ion chamber (MLIC) device. The second method utilized Gafchromic EBT3 film to directly compare relative ranges between sample and water after proton pencil beam irradiation. Ex vivo validation was performed using five different types of frozen animal tissues with the MLIC and three types of fresh animal tissues using film. In addition, the residual ranges recorded on the film were used to compare with those from the treatment planning system using both DECT and SECT derived SPRs. Bland-Altman analysis indicates that the differences between DECT and SPR measurement of tissue surrogates, frozen and fresh animal tissues has a mean of 0.07% and standard deviation of 0.58% compared to 0.55% and 1.94% respectively for single energy CT (SECT) and SPR measurement. Our ex vivo study indicates that the stoichiometric DECT SPR calibration method has the potential to be more accurate than SECT calibration under ideal conditions although beam hardening effects and other image artifacts may increase this uncertainty.

InternationaL cross-sectIonAl and longItudinal assessment on aSthma cONtrol in European adult patients - the LIAISON study protocol

PubMed Central

2013-01-01

Background According to international guidelines, the goal of asthma management is to achieve and maintain control of the disease, which can be assessed using composite measures. Prospective studies are required to determine how these measures are associated with asthma outcomes and/or future risk. The ‘InternationaL cross-sectIonAl and longItudinal assessment on aSthma cONtrol (LIAISON)’ observational study has been designed to evaluate asthma control and its determinants, including components of asthma management. Methods/design The LIAISON study will be conducted in 12 European countries and comprises a cross-sectional phase and a 12-month prospective phase. Both phases will aim at assessing asthma control (six-item Asthma Control Questionnaire, ACQ), asthma-related quality of life (Mini Asthma Quality of Life Questionnaire, Mini-AQLQ), risk of non-adherence to treatment (four-item Morisky Medication Adherence Scale, MMAS-4), potential reasons for poor control, treatment strategies and associated healthcare costs. The cross-sectional phase will recruit > 8,000 adult patients diagnosed with asthma for at least 6 months and receiving the same asthma treatment in the 4 weeks before enrolment. The prospective phase will include all patients with uncontrolled/poorly controlled asthma at the initial visit to assess the proportion reaching control during follow-up and to examine predictors of future risk. Visits will take place after 3, 6 and 12 months. Discussion The LIAISON study will provide important information on the prevalence of asthma control and on the quality of life in a broad spectrum of real-life patient populations from different European countries and will also contribute to evaluate differences in management strategies and their impact on healthcare costs over 12 months of observation. Trial registration ClinicalTrials.gov identifier, NCT01567280. PMID:23530817

Use of the human calvaria and skull as alms bowls and drinking vessels by Aghori ascetics in present-day India.

PubMed

Bosmia, Anand N; Griessenauer, Christoph J; Tubbs, R Shane

2013-10-01

The purpose of this article is to discuss the use of the human calvaria and skull as alms bowls and drinking vessels by a sect of Hindu ascetics in present-day India known as the Aghoris. The authors attempt to explain the rationale behind the Aghoris' use of the human calvaria and skull in this manner. A review of the literature using standard search engines was conducted to obtain information about the history and philosophy of the Aghori ascetics. Multiple academic references confirm the persistence of the practice of using the human calvaria and skull as alms bowls and drinking vessels among Aghori ascetics in present-day India. This practice is inspired by the Aghoris' monistic philosophy, a principle of which is that observance of social convention deters the individual soul in its journey towards liberation from the cycle of death and rebirth. Certain anatomical features of the human body have had religious significance in the past. Multiple academic references concerning the Aghoris argue that religious significance continues to be ascribed to certain components of human anatomy. In the case of the Aghoris, these components are the calvaria and skull.

The built environment, neighborhood safety, and physical activity among low-income children.

DOT National Transportation Integrated Search

2009-09-01

There is a growing body of evidence that environmental factors are related to physical activity and active modes of transportation. There is a separate body of research that links neighborhood safety to physical activity. This study used a cross sect...

A nonsense mutation in the LDL receptor gene leads to familial hypercholesterolemia in the Druze sect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landsberger, D.; Meiner, V.; Reshef, A.

1992-02-01

Familial hypercholesterolemia (FH) is an autosomal dominant disease caused by mutations in the LDL receptor gene. Here the authors characterize and LDL receptor mutation that is associated with a distinct haplotype and causes FH in the Druze, a small Middle Eastern Islamic sect with a high degree of inbreeding. The mutation was found in FH families from two distinct Druze villages from the Golan Heights (northern Israel). It was not found either in another Druze FH family residing in a different geographical area nor in eight Arab and four Jewish FH heterozygote index cases whose hypercholesterolemia cosegregates with an identicalmore » LDL receptor gene haplotype. The mutation, a single-base substitution, results in a termination codon in exon 4 of the LDL receptor gene that encodes for the fourth repeat of the binding domain of the mature receptor. It can be diagnosed by allele-specific oligonucleotide hybridization of PCR-amplified DNA from FH patients.« less

Gabriele Veneziano: A Concise Scientific Biography and an Interview

NASA Astrophysics Data System (ADS)

Gasperini, M.; Maharana, J.

The aim of these notes is to present a broad brush profile of the scientific activity of Gabriele Veneziano, whose wide spectrum of interests and variety of contributions to fundamental theoretical physics is also reflected by the articles of his collaborators and friends in this book. We thank Gabriele for his kind help in preparing these notes, and for disclosing to us some aspects of his life that we were not aware of. The responsibility of any omission and imprecision will rest on the authors, of course, and we apologize in advance for the (unavoidable) incompleteness of Sect. 1, warning the reader that a full survey of all of Gabriele’s activities is outside the scope of this introduction. Finally, we thank Gabriele for his patience in answering our questions that made possible the interview reported in Sect. 3 where, starting from the evocation of his past experience, he illustrates his personal point of view on the present status of fundamental physics, and his expectations for the future.

Electrophoretic enzyme analysis of North American and eastern Asian populations of Agastache sect. Agastache (Labiatae)

NASA Technical Reports Server (NTRS)

Vogelmann, James E.; Gastony, Gerald J.

1987-01-01

Genetic relationships among the seven species of Agastache sect. Agastache common in North America and the one found in eastern Asia were assessed using starch-gel electrophoresis of twelve enzymatic proteins. Nei's (1976) genetic distance and identity values, calculated among the 32 populations used in this study, partitioned the Agastache section into four discrete groups: (1) A. nepetoides (eastern North America), (2) A. scrophulariifolia and A. foeniculum (eastern and central North America), (3) the four species of the western U.S. (A. urticifolia, A. occidentalis, A. parvifolia, and A. cusickii), and (4) A. rugosa (eastern Asia). The Asian Agastache, separated from its American congeners for over 12 million years, differed from American populations at only two (the IDH-1 and LAP-1 alleles) of the fifteen loci surveyed; these alleles were not found in any of the North American plants. Nei's genetic distances between the Asian and North American populations ranged from 0.2877 to 0.6734.

Environmental Baseline Survey Report for the Title Transfer of Land Parcel ED-4 at the East Tennessee Technology Park, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

SAIC

2008-05-01

This environmental baseline survey (EBS) report documents the baseline environmental conditions of a land parcel referred to as 'ED-4' (ED-4) at the U. S. Department of Energy's (DOE's) East Tennessee Technology Park (ETTP). DOE is proposing to transfer the title of this land to the Heritage Center, LLC. Parcel ED-4 is a land parcel that consists of two noncontiguous areas comprising a total of approximately 18 acres located east of the ETTP. The western tract of ED-4 encompasses approximately 8.5 acres in the northeastern quadrant of the intersection of Boulevard Road and Highway 58. The eastern tract encompasses an areamore » of approximately 9.5 acres in the northwestern quadrant of the intersection of Blair Road and Highway 58 (the Oak Ridge Turnpike). Aerial photographs and site maps from throughout the history of the ETTP, going back to its initial development in the 1940s as the Oak Ridge Gaseous Diffusion Plant (ORGDP), indicate that this area has been undeveloped woodland with the exception of three support facilities for workers constructing the ORGDP since federal acquisition in 1943. These three support facilities, which were located in the western tract of ED-4, included a recreation hall, the Town Hall Camp Operations Building, and the Property Warehouse. A railroad spur also formerly occupied a portion of Parcel ED-4. These former facilities only occupied approximately 5 percent of the total area of Parcel ED-4. This report provides supporting information for the transfer of this government-owned property at ETTP to a non-federal entity. This EBS is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). In order to support a Clean Parcel Determination (CPD) in accordance with CERCLA Sect. 120(h)(4)(d), groundwater and sediment samples were collected within, and adjacent to, the Parcel ED-4 study area. The potential for DOE to make a CPD for ED-4 is further supported by a No Further Investigation (NFI) determination made on land that adjoins ED-4 to the east (DOE 1997a) and to the south (DOE 1997b).« less

Strategic Forum Number 208: Turbulent Transition in Iraq: Can It Succeed?

DTIC Science & Technology

2004-06-01

ministers including a prime minister, and a judiciary. There is separation of powers —legislative, executive, and judicial. The assembly will elect the... separation of powers based on geographic and historical realities and not race, ethnicity, nationality, or religious sect (confession). Formulation of

Miscellaneous: Various Low-Mach-Number Fluid Problems and Motions

NASA Astrophysics Data System (ADS)

Zeytounian, Radyadour Kh.

In this last chapter, we consider, first, in Sect. 7.1, mainly the asymptotic derivation of the KZK equation of nonlinear acoustics, which generalizes the well-known Burgers' unsteady one-dimensional dissipative model equation (Burgers 1948) to an equation with a diffraction and parabolic effect.

Coal liquefaction demonstration plant near Morgantown, West Virgina; water assessment report. Summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-08-21

This assessment report is for public review and comment and was prepared under the provision of Sect. 13(b) of the 1974 Federal Nonnuclear Energy Research and Development Act. It includes only a preliminary assessment of the commercial project as currently planned.

Full depth bituminous recycling of I-70, Thomas County, Kansas

DOT National Transportation Integrated Search

2004-01-01

In 1990, 13 full depth asphalt pavement test sections were built on a portion of I-70 in Thomas County, Kansas. Various combinations of hot mix and cold recycle mixes with different additives were used to build the test sections. Two of the test sect...

In-place cement stabilized base reconstruction techniques interim report : "construction and two year evaluation".

DOT National Transportation Integrated Search

2002-08-01

The purpose of this research was to evaluate the effectiveness of soil cement shrinkage crack mitigation techniques. The contents of this report reflect an evaluation of the construction of the test sections and a two-year evaluation of the test sect...

Four new morel (Morchella) species in the Elata Subclade (sect. Distantes) from Turkey

USDA-ARS?s Scientific Manuscript database

Four Turkish Morchella species identified in published multilocus molecular phylogenetic analyses are described here as new, using detailed macro- and microscopic data: M. mediterraneensis (Mel-27), M. fekeensis (Mel-28), M. magnispora (Mel-29), and M. conifericola (Mel-32). A distribution map of m...

Turbulent Transition in Iraq: Can It Succeed? (Strategic Forum, Number 208, June 2004)

DTIC Science & Technology

2004-06-01

council, a council of ministers including a prime minister, and a judiciary. There is separation of powers —legislative, executive, and judicial. The...defined as a system of separation of powers based on geographic and historical realities and not race, ethnicity, nationality, or religious sect

Educational Disparities and Conflict: Evidence from Lebanon

ERIC Educational Resources Information Center

Tfaily, Rania; Diab, Hassan; Kulczycki, Andrzej

2013-01-01

This article examines the impact of Lebanon's civil war (1975-1991) on disparities in education among the country's main religious sects and across various regions. District of registration is adopted as a proxy for religious affiliation through a novel, detailed classification to assess sectarian differentials by region and regional differentials…

Forming Social Capital: The Bruderhof Schools.

ERIC Educational Resources Information Center

Spielhagen, Frances R.; Cooper, Bruce S.

2002-01-01

Examines schools of the Bruderhof, a small, German, Protestant sect which arrived in the United States in 1954. This self-sufficient, educational community runs two businesses directly related to children's needs. Bruderhof education has its roots in the educational philosophy of Friedrich Froebel. The Bruderhof community provides in full four…

Contrasting andean geodynamics drive evolution of lowland taxa in western Amazonia

USDA-ARS?s Scientific Manuscript database

Using a palm lineage of 15 species (Astrocaryum sect. Huicungo), we tested an hypothesis that past geologic events in western Amazonia influenced the modern configuration of the upper Amazon drainage and thus diversification and distribution of these palsm, which found only in this region. The chang...

76 FR 16819 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Connected Media...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Connected Media Experience, Inc. Notice is hereby given that, on February 8, 2011... sect. (``the Act''), Connected Media Experience, Inc. (``CMX'') has filed written notifications...

China Report, Red Flag, Number 9, 1 May 1986.

DTIC Science & Technology

1986-06-10

Qing Dynasties also made use of its Lamaism sect and Islam as a spiritual mainstay to rule the minority nationalities concerned. In modern times...attaches importance to academic study and Lamaism pays attention to medicine. Buddhism and Taoism are noted for their martial arts and skills for

Israel, Schools, and Arab Conflict in the Middle East.

ERIC Educational Resources Information Center

Parker, Franklin

This paper examines how Israel's educational system attempts to deal with major social, geographic, religious, economic, and political problems. Problems are presented in two main categories--internal and external. Internal problems include high immigration levels, religious and cultural differences among various Jewish sects and between Jews and…

Developmental and Environmental Regulation of AaeIAP1 Transcript in Aedes aegypti

DTIC Science & Technology

2008-01-01

libitum. Emerged adults were transferred to a new screened cage, and adult samples were col- lected at different times after emergence. Bovine blood...and J. Zhang. 2007. The Aedes albopictus inhibitor of apoptosis 1 gene protects verte- brate cells from bluetongue virus-induced apoptosis. In- sect

Chemical composition and antimicrobial activity of the essential oils of some species of Anthemis sect. Anthemis (Asteraceae) from Sicily.

PubMed

Riccobono, Luana; Maggio, Antonella; Bruno, Maurizio; Spadaro, Vivienne; Raimondo, Francesco Maria

2017-12-01

The chemical composition of the essential oils isolated from the aerial parts of Anthemis arvensis L. subsp. arvensis, Anthemis cretica subsp. messanensis (Brullo) Giardina & Raimondo and from flowers and leaves of Anthemis cretica subsp. columnae (Ten.) Frezén were determinated by GC-FID and GC-MS analyses. Torreyol (85.4%) was recognised as the main constituent of the Anthemis arvensis subsp. arvensis essential oil, while in the essential oils of Anthemis cretica subsp. messanensis, collected on the rock and cultivated in Hortus Botanicus Panormitanus, (E)-chrysanthenyl acetate (28.8 and 24.2% resp.), 14-hydroxy-α-humulene (8.1 and 5.3% resp.), santolina triene (8 and 5.8% resp.) and α-pinene (6.7 and 5.4% resp.) prevailed. 18-cineole (13.3 and 12.2% resp.), was the main component of both flower and leaf oils of Anthemis cretica subsp. columnae together with δ-cadinene (9.0 and 8.2% resp.) and (E)-caryophyllene (8.3 and 5.6% resp.).

What Is Amish in Old Amish Education.

ERIC Educational Resources Information Center

Ediger, Marlow

The Old Order Amish society is unique among diverse Mennonite sects. Their traditions and simplicity of lifestyle are evident in their manner of dress, non-mechanized farming practices, and rejection of electricity or running water in their homes. In an Old Order Amish education, children are taught the "four R's:" reading, writing,…

78 FR 27065 - Approval and Promulgation of Implementation Plans; North Carolina; Control Techniques Guidelines...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-09

... requirements. See section 307(b)(2). List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution... Explanation Subchapter 2D Air Pollution Control Requirements * * * * * * * Section .0900 Volatile Organic... Miscellaneous Metal 9/1/2010 5/9/2013 [Insert citation of and Plastic Parts publication]. Coatings. Sect .0968...

Anthropometric Relationships of Body and Body Segment Moments of Inertia

DTIC Science & Technology

1980-12-01

platform balanced on a knife edge ( Borelli , 1679). While weight, volume, center of mass and moments of inertia of the whole body can be measured in a...Segments, Paper No. 720964, SAE Transactions, Vol. 81, Sect. 4, pp. 2818-2833. Borelli , J. A., 1679, De Motu Animalium. Lugduni Batavorum. Braune, W

Mishmarot Calendars from Qumran Cave 4: Congruence and Divergence

NASA Astrophysics Data System (ADS)

Snyder, George, Jr.

1997-09-01

This study examines the calendar observed by the sect whose writings have been found in the caves of the Judean desert. Chapter I introduces the Qumran calendar as an outgrowth of the 364-day pseudo-solar year described in the astronomical chapters of 1 Enoch and defended in the Book of Jubilees. The Temple Scroll completes a calendric foundation by making canonical several summer harvest festivals not found in the Hebrew Scriptures. Chapters II through VII detail the eight mishmarot manuscripts, providing text, translation, and analysis toward understanding the fully developed calendric structure. These investigations manifest arguments that establish the beginning of the sect's lunar month at the full moon, present coordination methodologies that balance the 364-day solar year with the 354-day lunar one, and reveal two different arrangements of the festival cycle. The Conclusion gathers under the heads of Enoch and Jubilees evidence to propose two sectarian calendar traditions and brings forward other texts which could be similarly categorized. Three appendices and a glossary support the discussion from non-mishmarot calendars and presenting an eclectic six-year calendar in full detail.

NanoVipa: a miniaturized high-resolution echelle spectrometer, for the monitoring of young stars from a 6U Cubesat

NASA Astrophysics Data System (ADS)

Bourdarot, G.; Le Coarer, E.; Bonfils, X.; Alecian, E.; Rabou, P.; Magnard, Y.

2017-12-01

We introduce to astrophysical instrumentation and space optics the use of virtually imaged phased array (VIPA) to shrink échelle spectrometers and/or increase their resolution. Here, we report on both a concept of an echelle spectrometer with resolution R=50{,}000 (@653nm), which fits a 6U nanosatellite platform ({{1U= 10 cm × 10 cm × 10 cm}}), and on our laboratory tests on a R=200{,}000 demonstrator. The outline of our paper is as follows: Sect. 1 introduces our concept of a 6U payload comprising an échelle spectrometer based on the VIPA. We present also the science cases of monitoring young stars, and the wider science landscape amenable with larger telescopes. Section 2 gives a more detailed description of the VIPA and of its implementation in a cross-dispersed spectrometer. Section 3 shows the first results at R=200{,}000 we already achieved at the Institut de Planétologie et d'Astrophysique de Grenoble (IPAG). Finally, Sect. 4 is a discussion on the remaining technical points to study.

Systematics of Juniperus section Juniperus based on leaf essential oils and random amplified polymorphic DNAs (RAPDs).

PubMed

Adams

2000-07-01

The composition of the leaf essential oils of all the species of Juniperus in sect. Juniperus (=sect. Oxycedrus) are reported and compared (J. brevifolia, J. cedrus, J. communis, J. c. var. saxatilis, J. c. var. oblonga, J. formosana, J. oxycedrus, J. o. subsp. badia, J. o. subsp. macrocarpa, J. o. subsp. transtagana, J. rigida, J. r. subsp. conferta, J. sibirica, J. taxifolia and J. t. var. lutchuensis). In addition, DNA fingerprinting by RAPDs was utilized. Based on these data, several taxa remained at the same taxonomic level: J. brevifolia, J. cedrus, J. communis, J. c. var. saxatilis, J. formosana, J. oxycedrus, J. rigida, J. r. var. conferta, and J. taxifolia. However, several taxa exhibited considerable differentiation that warranted their recognition at the specific level: J. oblonga M.-Bieb. (=J. communis var. oblonga), J. badia H. Gay (=J. oxycedrus subsp. badia), J. macrocarpa Sibth. and Sm. (=J. oxycedrus subsp. macrocarpa), J. navicularis Gand. (=J. oxycedrus subsp. transtagana), J. sibirica Brugsd. (=J. communis var. saxatilis in part), and J. lutchuensis Koidz. (= J. taxifolia var. lutchuensis).

Advances in taxonomy of genus phoma: polyphyletic nature and role of phenotypic traits and molecular systematics.

PubMed

Rai, Mahendra Kumar; Tiwari, Vaibhav V; Irinyi, László; Kövics, György János

2014-06-01

Phoma is a highly polyphyletic genus with its unclear species boundaries. The conventional system of identification is functional but it has its limitations. Besides morphological studies, chemotaxonomy, secondary metabolite and protein profiling have been assessed for the classification and identification of these fungi. Molecular datasets have provided a better outlook towards the phylogenetic and evolutionary trends of Phoma. Molecular markers such as ITS-rDNA, tubulin, actin, translation elongation factor have been widely used by the taxonomists to demarcate species. However, outcomes gained up till now represent preliminary step towards the study of Phoma systematics and a combined approach would be beneficial in the understanding of this polyphyletic group members. Lately, on the base of molecular phylogeny of the type species of the seven Phoma sections a new teleomorph family, Didymellaceae has been established, besides the Phaeosphaeriaceae related to sect. Paraphoma anamorphs, and the Leptosphaeriaceae to sect. Heterospora anamorphs. The estimated ratio is about 70 % of the recognized Phoma-like species can be associated with the Didymellaceae ascomycetous family.

Phylogenetic relationships within Chamaecrista sect. Xerocalyx (Leguminosae, Caesalpinioideae) inferred from the cpDNA trnE-trnT intergenic spacer and nrDNA ITS sequences

PubMed Central

Torres, Davi Coe; Lima, João Paulo Matos Santos; Fernandes, Afrânio Gomes; Nunes, Edson Paula; Grangeiro, Thalles Barbosa

2011-01-01

Chamaecrista belongs to subtribe Cassiinae (Caesalpinioideae), and it comprises over 330 species, divided into six sections. The section Xerocalyx has been subjected to a profound taxonomic shuffling over the years. Therefore, we conducted a phylogenetic analysis using a cpDNA trnE-trnT intergenic spacer and nrDNA ITS/5.8S sequences from Cassiinae taxa, in an attempt to elucidate the relationships within this section from Chamaecrista. The tree topology was congruent between the two data sets studied in which the monophyly of the genus Chamaecrista was strongly supported. Our analyses reinforce that new sectional boundaries must be defined in the Chamaecrista genus, especially the inclusion of sections Caliciopsis and Xerocalyx in sect. Chamaecrista, considered here paraphyletic. The section Xerocalyx was strongly supported as monophyletic; however, the current data did not show C. ramosa (microphyllous) and C. desvauxii (macrophyllous) and their respective varieties in distinct clades, suggesting that speciation events are still ongoing in these specimens. PMID:21734825

Population structure and aflatoxin production by Aspergillus Sect. Flavi from maize in Nigeria and Ghana.

PubMed

Perrone, Giancarlo; Haidukowski, Miriam; Stea, Gaetano; Epifani, Filomena; Bandyopadhyay, Ranajit; Leslie, John F; Logrieco, Antonio

2014-08-01

Aflatoxins are highly toxic carcinogens that contaminate crops worldwide. Previous studies conducted in Nigeria and Ghana found high concentrations of aflatoxins in pre- and post-harvest maize. However, little information is available on the population structure of Aspergillus Sect. Flavi in West Africa. We determined the incidence of Aspergillus Sect. Flavi and the level of aflatoxin contamination in 91 maize samples from farms and markets in Nigeria and Ghana. Aspergillus spp. were recovered from 61/91 maize samples and aflatoxins B1 and/or B2 occurred in 36/91 samples. Three samples from the farms also contained aflatoxin G1 and/or G2. Farm samples were more highly contaminated than were samples from the market, in terms of both the percentage of the samples contaminated and the level of mycotoxin contamination. One-hundred-and-thirty-five strains representative of the 1163 strains collected were identified by using a multilocus sequence analysis of portions of the genes encoding calmodulin, β-tubulin and actin, and evaluated for aflatoxin production. Of the 135 strains, there were 110 - Aspergillus flavus, 20 - Aspergillus tamarii, 2 - Aspergillus wentii, 2 - Aspergillus flavofurcatus, and 1 - Aspergillus parvisclerotigenus. Twenty-five of the A. flavus strains and the A. parvisclerotigenus strain were the only strains that produced aflatoxins. The higher contamination of the farm than the market samples suggests that the aflatoxin exposure of rural farmers is even higher than previously estimated based on reported contamination of market samples. The relative infrequency of the A. flavus SBG strains, producing small sclerotia and high levels of both aflatoxins (B and G), suggests that long-term chronic exposure to this mycotoxin are a much higher health risk in West Africa than is the acute toxicity due to very highly contaminated maize in east Africa. Copyright © 2014 Elsevier Ltd. All rights reserved.

Impact of low-energy CT imaging on selection of positive oral contrast media concentration.

PubMed

Patino, Manuel; Murcia, Diana J; Iamurri, Andrea Prochowski; Kambadakone, Avinash R; Hahn, Peter F; Sahani, Dushyant V

2017-05-01

To determine to what extent low-energy CT imaging affects attenuation of gastrointestinal tract (GIT) opacified with positive oral contrast media (OCM). Second, to establish optimal OCM concentrations for low-energy diagnostic CT exams. One hundred patients (38 men and 62 women; age 62 ± 11 years; BMI 26 ± 5) with positive OCM-enhanced 120-kVp single-energy CT (SECT), and follow-up 100-kVp acquisitions (group A; n = 50), or 40-70-keV reconstructions from rapid kV switching-single-source dual-energy CT (ssDECT) (group B; n = 50) were included. Luminal attenuation from different GIT segments was compared between exams. Standard dose of three OCM and diluted solutions (75%, 50%, and 25% concentrations) were introduced serially in a gastrointestinal phantom and scanned using SECT (120, 100, and 80 kVp) and DECT (80/140 kVp) acquisitions on a ssDECT scanner. Luminal attenuation was obtained on SECT and DECT images (40-70 keV), and compared to 120-kVp scans with standard OCM concentrations. Luminal attenuation was higher on 100-kVp (328 HU) and on 40-60-keV images (410-924 HU) in comparison to 120-kVp scans (298 HU) in groups A and B (p < 0.05). Phantom: There was an inverse correlation between luminal attenuation and X-ray energy, increasing up to 527 HU on low-kVp and 999 HU on low-keV images (p < 0.05). 25% and 50% diluted OCM solutions provided similar or higher attenuation than 120 kVp, at low kVp and keV, respectively. Low-energy CT imaging increases the attenuation of GIT opacified with positive OCM, permitting reduction of 25%-75% OCM concentration.

SU-F-T-270: A Technique for Modeling a Diode Array Into the TPS for Lung SBRT Patient Specific QA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curley, C; Leventouri, T; Ouhib, Z

2016-06-15

Purpose: To accurately match the treatment planning system (TPS) with the measurement environment, where quality assurance (QA) devices are used to collect data, for lung Stereotactic Body Radiation Therapy (SBRT) patient specific QA. Incorporation of heterogeneities is also studied. Methods: Dual energy computerized tomography (DECT) and single energy computerized tomography (SECT) were used to model phantoms incorporating a 2-D diode array into the TPS. A water-equivalent and a heterogeneous phantom (simulating the thoracic region of a patient) were studied. Monte Carlo and pencil beam planar dose distributions were compared to measured distributions. Composite and individual fields were analyzed for normallymore » incident and planned gantry angle deliveries. γ- analysis was used with criteria 3% 3mm, 2% 2mm, and 1% 1mm. Results: The Monte Carlo calculations for the DECT resulted in improved agreements with the diode array for 46.4% of the fields at 3% 3mm, 85.7% at 2% 2mm, and 92.9% at 1% 1mm.For the SECT, the Monte Carlo calculations gave no agreement for the same γ-analysis criteria. Pencil beam calculations resulted in lower agreements with the diode array in the TPS. The DECT showed improvements for 14.3% of the fields at 3% 3mm and 2% 2mm, and 28.6% at 1% 1mm.In SECT comparisons, 7.1% of the fields at 3% 3mm, 10.7% at 2% 2mm, and 17.9% at 1% 1mm showed improved agreements with the diode array. Conclusion: This study demonstrates that modeling the diode array in the TPS is viable using DECT with Monte Carlo for patient specific lung SBRT QA. As recommended by task groups (e.g. TG 65, TG 101, TG 244) of the American Association of Physicists in Medicine (AAPM), pencil beam algorithms should be avoided in the presence of heterogeneous materials, including a diode array.« less

Psychometric properties of the Image of God Scale in breast cancer survivors.

PubMed

Schreiber, Judy A

2012-07-01

To examine the psychometric properties of the Image of God Scale (IGS) in a clinical population. Descriptive, cross-sectional. University and community oncology practices in the southeastern United States. 123 breast cancer survivors no more than two years from completion of treatment. Scale reliability was determined with the coefficient alpha. Instrument dimensionality was examined using principal component analysis. Construct validity was evaluated by examining correlations with other instruments used in the study. An individual's image of God. Internal consistency was strong (anger subscale = 0.8; engagement subscale = 0.89). The principle component analysis resulted in a two-factor solution with items loading uniquely on Factor 1-Engagement (8) and Factor 2-Anger (6). Significant correlations between the IGS and religious coping support convergence on a God concept. Correlations with psychological well-being, psychological distress, and concern about recurrence were nonsignificant (engagement) or inverse (anger), supporting discrimination between concepts of God and psychological adjustment. The IGS is a unique measure of how God is viewed by the depth and character of His involvement with the individual and the world. The IGS may be a measure that can transcend sects, denominations, and religions by identifying the image of God that underlies and defines an individuals' worldview, which influences their attitudes and behaviors.

Improved tissue assignment using dual-energy computed tomography in low-dose rate prostate brachytherapy for Monte Carlo dose calculation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Côté, Nicolas; Bedwani, Stéphane; Carrier, Jean-François, E-mail: jean-francois.carrier.chum@ssss.gouv.qc.ca

Purpose: An improvement in tissue assignment for low-dose rate brachytherapy (LDRB) patients using more accurate Monte Carlo (MC) dose calculation was accomplished with a metallic artifact reduction (MAR) method specific to dual-energy computed tomography (DECT). Methods: The proposed MAR algorithm followed a four-step procedure. The first step involved applying a weighted blend of both DECT scans (I {sub H/L}) to generate a new image (I {sub Mix}). This action minimized Hounsfield unit (HU) variations surrounding the brachytherapy seeds. In the second step, the mean HU of the prostate in I {sub Mix} was calculated and shifted toward the mean HUmore » of the two original DECT images (I {sub H/L}). The third step involved smoothing the newly shifted I {sub Mix} and the two original I {sub H/L}, followed by a subtraction of both, generating an image that represented the metallic artifact (I {sub A,(H/L)}) of reduced noise levels. The final step consisted of subtracting the original I {sub H/L} from the newly generated I {sub A,(H/L)} and obtaining a final image corrected for metallic artifacts. Following the completion of the algorithm, a DECT stoichiometric method was used to extract the relative electronic density (ρ{sub e}) and effective atomic number (Z {sub eff}) at each voxel of the corrected scans. Tissue assignment could then be determined with these two newly acquired physical parameters. Each voxel was assigned the tissue bearing the closest resemblance in terms of ρ{sub e} and Z {sub eff}, comparing with values from the ICRU 42 database. A MC study was then performed to compare the dosimetric impacts of alternative MAR algorithms. Results: An improvement in tissue assignment was observed with the DECT MAR algorithm, compared to the single-energy computed tomography (SECT) approach. In a phantom study, tissue misassignment was found to reach 0.05% of voxels using the DECT approach, compared with 0.40% using the SECT method. Comparison of the DECT and SECT D {sub 90} dose parameter (volume receiving 90% of the dose) indicated that D {sub 90} could be underestimated by up to 2.3% using the SECT method. Conclusions: The DECT MAR approach is a simple alternative to reduce metallic artifacts found in LDRB patient scans. Images can be processed quickly and do not require the determination of x-ray spectra. Substantial information on density and atomic number can also be obtained. Furthermore, calcifications within the prostate are detected by the tissue assignment algorithm. This enables more accurate, patient-specific MC dose calculations.« less

75 FR 14190 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture To...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Joint Venture To Perform Project Entitled Robotic Rehabilitation of Aging Water... Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et sect. (``the Act''), Joint [[Page 14191...

Functional analyses of cotton (Gossypium hirsutum L.) immature fiber (im) mutant reveal that fiber cell wall development is associated with sensitivity to stress.

USDA-ARS?s Scientific Manuscript database

Background: Cotton fiber maturity refers the degree of fiber cell wall development and is an important factor for determining commercial value of cotton. The molecular mechanism regulating the fiber cell wall development has not been well characterized. Microscopic image analysis of the cross-sect...

Mycena sect. Hygrocyboideae in the mountains of the Dominican Republic

Treesearch

D. Jean Lodge; B.A. Perry; D.E. Desjardin

2004-01-01

A collection of Mycena epipterygia from montane cloud forest in the Dominican Republic was found to have one-fourth to one-half monosporous basidia mixed with bisporous basidia. It is described as a new variety, M. epipterygia var. domingensis Lodge, differing from M. epipterygia var. epipterygioides and other two-spored varieties in having smaller dimensions of spores...

Species Boundaries and Interrelationships of Solanum Sect. Petota (Wild and Cultivated Potatoes) are Drastically Altered as a Result of PBI-Funded Research

USDA-ARS?s Scientific Manuscript database

In 1990, the latest comprehensive taxonomic monograph of Solanum section Petota Dumort, recognized 232 species partitioned into 21 series. PBI-sponsored research has drastically altered knowledge of their species boundaries and interrelationships. The series contains diploids (2n = 2x = 24), tetrapl...

Species Boundaries and Interrelationships of Solanum Sect. Petota (Wild and Cultivated Potatoes) are Drastically Altered as a Result of PBI-Funded Research

USDA-ARS?s Scientific Manuscript database

In 1990, the latest comprehensive taxonomic monograph of Solanum section Petota Dumort recognized 232 species partitioned into 21 series. PBI-sponsored research has drastically altered knowledge of their species boundaries and interrelationships. The series contains diploids (2n = 2x = 24), tetraplo...

Erratum: Erratum to: Thermodynamic implications of the gravitationally induced particle creation scenario

NASA Astrophysics Data System (ADS)

Saha, Subhajit; Mondal, Anindita

2018-04-01

We would like to rectify an error regarding the validity of the first law of thermodynamics (FLT) on the apparent horizon of a spatially flat Friedmann-Lemaitre-Robertson-Walker (FLRW) universe for the gravitationally induced particle creation scenario with constant specific entropy and an arbitrary particle creation rate (see Sect. 3.1 of original article)

VizieR Online Data Catalog: PCA-based inversion of stellar parameters (Gebran+, 2016)

NASA Astrophysics Data System (ADS)

Gebran, M.; Farah, W.; Paletou, F.; Monier, R.; Watson, V.

2016-03-01

Inverted effective temperatures, surface gravities, projected rotational velocities, metalicities, and radial velocities for the selected A stars. The "closest" are the values found in Vizier catalogues closest to our inverted parameters, while "median" are the median of the catalogue values. Outliers are marked as "1" in the "outliers" column (see sect. 6) (1 data file).

Phylogenetic relationships of Solanum series Conicibaccata and related species in Solanum section Petota inferred from five conserved ortholog sequences

USDA-ARS?s Scientific Manuscript database

Solanum series Conicibaccata is the second largest series in sect. Petota, containing 40 species widely distributed from southern Mexico to central Bolivia. It contains diploids (2n = 2x = 24), tetraploids (2n = 4x = 48) and hexaploids (2n = 6x = 72), and a limited number of examined species have be...

The Lebanese in America. In America Series.

ERIC Educational Resources Information Center

Harik, Elsa Marston

The history of Lebanese immigrants to the United States is reviewed, and the contributions of this ethnic group to the American fabric are explored in this book which is part of a series for children. For at least 1,500 years Lebanon was a sort of haven for religious sects that would not have been allowed such freedom elsewhere. As a result, the…

Extremist Religious Ideologies and Military Strategy

DTIC Science & Technology

2006-06-16

on bogus tips anonymously supplied by the IRA disinformation operations. Unfortunately, the Royal Ulster Constabulary’s intelligence-gathering...2005. 43John Pike, Federation of American Scientist, Intelligence Resource Services, Serb Volunteer Guard [ SDG / SSJ] “Arkan’s Tigers;” 1 February...learn more about the religion of Islam and the various fundamentalist sects within Islam. This knowledge should be disseminated throughout the chain

Penstemon lanceolatus Benth. or P. ramosus Crosswhite in Arizona and New Mexico, a peripheral or endemic species?

Treesearch

J. L. Anderson; S. Richmond-Williams; O. Williams

2007-01-01

The red-flowered member of Penstemon sect. Chamaeleon from southeastern Arizona and southwestern New Mexico has been treated taxonomically both as part of the Mexican species, P. lanceolatus Benth., and as a separate species, P. ramosus Crosswhite. Under the former treatment the Arizona and New Mexico populations are peripheral populations of a primarily Mexican...

Aum Shinrikyo's Chemical and Biological Weapons: More Than Sarin.

PubMed

Tu, A T

2014-07-01

The radical religious group Aum Shinrikyo was founded in Japan in the 1980s and grew rapidly in the 1990s. Aum members perpetrated a mass murder in Matsumoto City in 1994, where they used sarin as a chemical weapon to poison approximately 500 civilians. On March 20, 1995, Aum deployed sarin in an even larger terrorist attack on the Tokyo Subway System, which poisoned some 6,000 people. After the Tokyo Subway attack, the Japanese Police arrested the sect's senior members. From 2005 through 2011, 13 of these senior members were sentenced to death. In this article, aspects of Aum's chemical and biological terrorism are reviewed. Sarin production efforts by the sect are described, including how the degradation product of sarin in soil, methylphosphonic acid, enabled the detection of sarin production sites. Also, Aum's chemical-warfare agents other than sarin are described, as are its biological weapons. The author was permitted by the Japanese government to interview Dr. Tomomasa Nakagawa, one of the senior members of Aum Shinrikyo. From Dr. Nakagawa the author obtained valuable inside information about Aum's chemical and biological weapons programs. Copyright © 2014 Central Police University.

The Attitude of Iranian Nurses About Do Not Resuscitate Orders

PubMed Central

Mogadasian, Sima; Abdollahzadeh, Farahnaz; Rahmani, Azad; Ferguson, Caleb; Pakanzad, Fermisk; Pakpour, Vahid; Heidarzadeh, Hamid

2014-01-01

Background: Do not resuscitate (DNR) orders are one of many challenging issues in end of life care. Previous research has not investigated Muslim nurses’ attitudes towards DNR orders. Aims: This study aims to investigate the attitude of Iranian nurses towards DNR orders and determine the role of religious sects in forming attitudes. Materials and Methods: In this descriptive-comparative study, 306 nurses from five hospitals affiliated to Tabriz University of Medical Sciences (TUOMS) in East Azerbaijan Province and three hospitals in Kurdistan province participated. Data were gathered by a survey design on attitudes on DNR orders. Data were analyzed using Statistical Package for Social Sciences (SPSS Inc., Chicago, IL) software examining descriptive and inferential statistics. Results: Participants showed their willingness to learn more about DNR orders and highlights the importance of respecting patients and their families in DNR orders. In contrast, in many key items participants reported their negative attitude towards DNR orders. There were statistical differences in two items between the attitude of Shiite and Sunni nurses. Conclusions: Iranian nurses, regardless of their religious sects, reported negative attitude towards many aspects of DNR orders. It may be possible to change the attitude of Iranian nurses towards DNR through education. PMID:24600178

The attitude of Iranian nurses about do not resuscitate orders.

PubMed

Mogadasian, Sima; Abdollahzadeh, Farahnaz; Rahmani, Azad; Ferguson, Caleb; Pakanzad, Fermisk; Pakpour, Vahid; Heidarzadeh, Hamid

2014-01-01

Do not resuscitate (DNR) orders are one of many challenging issues in end of life care. Previous research has not investigated Muslim nurses' attitudes towards DNR orders. This study aims to investigate the attitude of Iranian nurses towards DNR orders and determine the role of religious sects in forming attitudes. In this descriptive-comparative study, 306 nurses from five hospitals affiliated to Tabriz University of Medical Sciences (TUOMS) in East Azerbaijan Province and three hospitals in Kurdistan province participated. Data were gathered by a survey design on attitudes on DNR orders. Data were analyzed using Statistical Package for Social Sciences (SPSS Inc., Chicago, IL) software examining descriptive and inferential statistics. Participants showed their willingness to learn more about DNR orders and highlights the importance of respecting patients and their families in DNR orders. In contrast, in many key items participants reported their negative attitude towards DNR orders. There were statistical differences in two items between the attitude of Shiite and Sunni nurses. Iranian nurses, regardless of their religious sects, reported negative attitude towards many aspects of DNR orders. It may be possible to change the attitude of Iranian nurses towards DNR through education.

Asymmetric Introgression in the Horticultural Living Fossil Cycas Sect. Asiorientales Using a Genome-Wide Scanning Approach

PubMed Central

Chiang, Yu-Chung; Huang, Bing-Hong; Chang, Chun-Wen; Wan, Yu-Ting; Lai, Shih-Jie; Huang, Shong; Liao, Pei-Chun

2013-01-01

The Asian cycads are mostly allopatric, distributed in small population sizes. Hybridization between allopatric species provides clues in determining the mechanism of species divergence. Horticultural introduction provides the chance of interspecific gene flow between allopatric species. Two allopatrically eastern Asian Cycas sect. Asiorientales species, C. revoluta and C. taitungensis, which are widely distributed in Ryukyus and Fujian Province and endemic to Taiwan, respectively, were planted in eastern Taiwan for horticultural reason. Higher degrees of genetic admixture in cultivated samples than wild populations in both cycad species were detected based on multilocus scans by neutral AFLP markers. Furthermore, bidirectional but asymmetric introgression by horticultural introduction of C. revoluta is evidenced by the reanalyses of species associated loci, which are assumed to be diverged after species divergence. Partial loci introgressed from native cycad to the invaders were also detected at the loci of strong species association. Consistent results tested by all neutral loci, and the species-associated loci, specify the recent introgression from the paradox of sharing of ancestral polymorphisms. Phenomenon of introgression of cultivated cycads implies niche conservation among two geographic-isolated cycads, even though the habitats of the extant wild populations of two species are distinct. PMID:23591840

Lebanon.

PubMed

1988-04-01

General notes about Lebanon are presented: political history, government, population, geography, economy and foreign relations. Lebanon lies on the eastern shore of the Mediterranean, and is composed of a coastal plain bound on the east by high mountains. The population numbers about 2.5 million, although no census has been taken since 1932. 6 different types of Christian sects and 3 of Muslims contribute to instability. The strife has been aggravated by invasions by Israel against Palestinians encamped there, and by Syria as part of an Arab peace-keeping force. Despite constant civil war since the 1950s, the Lebanese government has continued to function, a parliamentary constitutional system with a judicial system based on the Napoleonic code. Amendments to the 1926 constitution have mandated that representation in the National Assembly and among top government positions be apportioned based on distribution of significant religious groups. Political parties in Lebanon are extremely complex, and include parties loyal to clan or local leaders, those ranging from the right to left, those resembling Arab parties in other nations, and those dedicated to religious sects. The economy is normally based on agriculture, and on commerce and banking in the primary coastal cities, but is in decline currently.

Revision of the Lima clade (Miconia sect. Lima, Miconieae, Melastomataceae) of the Greater Antilles

PubMed Central

Majure, Lucas C.; Bécquer, Eldis R.; Judd, Walter S.

2016-01-01

Abstract Miconia sect. Lima is an entirely Greater Antillean clade that consists of 19 known species of shrubs and small trees, which were previously recognized under the polyphyletic genera Leandra and Ossaea. The highest species richness in the clade is represented on Cuba (10 species), followed by Hispaniola (8 species) and then Jamaica (1 species). Here we present a taxonomic revision of the clade based on the study of species in the field, herbarium specimens, as well as a DNA-based phylogeny reconstruction. The Lima clade most likely originated on Cuba and then spread to Jamaica once and Hispaniola multiple times. Species of this clade can be recognized by the well developed bulla-based hairs of the adaxial leaf surface, as well as the clavate-dendritic hairs produced along the primary, secondary and tertiary veins of the adaxial leaf surface, mostly towards the leaf base, terminal inflorescences, acute petal apices, slightly bulla-based hairs produced subapically along the petal abaxial surface, and anthers with a dorso-basal appendage and a single, dorsally oriented pore. Descriptions, synonymies, along with distribution maps and illustrations/figures, are given for each species. Miconia pagnolensis sp. nov. is newly described in this revision. PMID:27829802

Blue pigment in Hypocrea caerulescens sp. nov. and two additional new species in sect. Trichoderma

PubMed Central

Jaklitsch, Walter M.; Stadler, Marc; Voglmayr, Hermann

2012-01-01

Three new species of Hypocrea/Trichoderma sect. Trichoderma (Hypocreaceae, Hypocreales, Ascomycota, Fungi) are described from recent collections in southern Europe and the Canary Islands. They have been characterized by morphological and molecular methods, including microscopic examination of the teleomorph in thin sections, the anamorph, growth rate experiments and phylogenetic analyses based on a part of the translation elongation factor 1-alpha encoding gene (tef1) containing the two last introns and a part of the rpb2 gene, encoding the second largest RNA polymerase subunit. Analyses involving tef1 did not unequivocally resolve the sister clade relationship of Hypocrea caerulescens relative to the Koningii and Viride clades, while analyses based on rpb2 clearly suggest a close relationship with the former, although the phenotype of H. caerulescens is similar to H. viridescens, particularly by its warted conidia and a coconut-like odor in CMD culture. Hypocrea hispanica and T. samuelsii however are clearly related to the Viride clade by both phylogenetic markers, despite their morphological similarity to H. koningii and its relatives. An apparently specific blue pigment is formed in CMD cultures by Hypocrea caerulescens but could not be obtained by extraction with organic solvents. PMID:22453122

Retrotransposon-Based Molecular Markers for Analysis of Genetic Diversity within the Genus Linum

PubMed Central

Melnikova, Nataliya V.; Kudryavtseva, Anna V.; Zelenin, Alexander V.; Lakunina, Valentina A.; Yurkevich, Olga Yu.; Speranskaya, Anna S.; Dmitriev, Alexey A.; Krinitsina, Anastasia A.; Belenikin, Maxim S.; Uroshlev, Leonid A.; Snezhkina, Anastasiya V.; Sadritdinova, Asiya F.; Koroban, Nadezda V.; Amosova, Alexandra V.; Samatadze, Tatiana E.; Guzenko, Elena V.; Lemesh, Valentina A.; Savilova, Anastasya M.; Rachinskaia, Olga A.; Kishlyan, Natalya V.; Rozhmina, Tatiana A.; Bolsheva, Nadezhda L.; Muravenko, Olga V.

2014-01-01

SSAP method was used to study the genetic diversity of 22 Linum species from sections Linum, Adenolinum, Dasylinum, Stellerolinum, and 46 flax cultivars. All the studied flax varieties were distinguished using SSAP for retrotransposons FL9 and FL11. Thus, the validity of SSAP method was demonstrated for flax marking, identification of accessions in genebank collections, and control during propagation of flax varieties. Polymorphism of Fl1a, Fl1b, and Cassandra insertions were very low in flax varieties, but these retrotransposons were successfully used for the investigation of Linum species. Species clusterization based on SSAP markers was in concordance with their taxonomic division into sections Dasylinum, Stellerolinum, Adenolinum, and Linum. All species of sect. Adenolinum clustered apart from species of sect. Linum. The data confirmed the accuracy of the separation in these sections. Members of section Linum are not as closely related as members of other sections, so taxonomic revision of this section is desirable. L. usitatissimum accessions genetically distant from modern flax cultivars were revealed in our work. These accessions are of utmost interest for flax breeding and introduction of new useful traits into flax cultivars. The chromosome localization of Cassandra retrotransposon in Linum species was determined. PMID:25243121

Self-interested agents create, maintain, and modify group-functional culture.

PubMed

Singh, Manvir; Glowacki, Luke; Wrangham, Richard W

2016-01-01

We agree that institutions and rules are crucial for explaining human sociality, but we question the claim of there not being "alternatives to CGS [that] can easily account for the institutionalized cooperation that characterizes human societies" (target article, sect. 7). Hypothesizing that self-interested individuals coercively and collaboratively create rules, we propose that agent-based hypotheses offer viable alternatives to cultural group selection (CGS).

Development of molecular markers for determining continental origin of wood from White Oaks (Quercus L. sect. Quercus)

Treesearch

Hilke Schroeder; Richard Cronn; Yulai Yanbaev; Tara Jennings; Malte Mader; Bernd Degen; Birgit Kersten; Dusan Gomory

2016-01-01

To detect and avoid illegal logging of valuable tree species, identification methods for the origin of timber are necessary. We used next-generation sequencing to identify chloroplast genome regions that differentiate the origin of white oaks from the three continents; Asia, Europe, and North America. By using the chloroplast genome of Asian Q. mongolica...

Climate Change, National Security, and the Quadrennial Defense Review. Avoiding the Perfect Storm

DTIC Science & Technology

2008-01-01

consequently, higher ocean water temperatures are increasing the occurrence of coral bleaching and coral reef die-offs.57 The IPCC concludes that...unprecedented combination of climate change, associated disturbances (e.g., flooding, drought, wildfire, in- sects, ocean acidification ), and other global...instance, the disintegration of saltwater fishing indus- tries due to ocean acidification could spark inter- and intrastate conflict as numerous

28. Fern Canyon (Meier 1979)

Treesearch

Sheauchi Cheng

2004-01-01

This established RNA is on the San Dimas Experimental Forest, within the Angeles National Forest. It is approximately 6 miles (10 km) N. of the city of Claremont. It occupies portions of seven sects. in T1N, R8W SBBM (34°12'N., 117°43'W.), USGS Mt. Baldy quad (fig. 58). Ecological subsection – San Gabriel Mountains (M261Bd).

Comparison of image quality and radiation dose between split-filter dual-energy images and single-energy images in single-source abdominal CT.

PubMed

Euler, André; Obmann, Markus M; Szucs-Farkas, Zsolt; Mileto, Achille; Zaehringer, Caroline; Falkowski, Anna L; Winkel, David J; Marin, Daniele; Stieltjes, Bram; Krauss, Bernhard; Schindera, Sebastian T

2018-02-19

To compare image quality and radiation dose of abdominal split-filter dual-energy CT (SF-DECT) combined with monoenergetic imaging to single-energy CT (SECT) with automatic tube voltage selection (ATVS). Two-hundred single-source abdominal CT scans were performed as SECT with ATVS (n = 100) and SF-DECT (n = 100). SF-DECT scans were reconstructed and subdivided into composed images (SF-CI) and monoenergetic images at 55 keV (SF-MI). Objective and subjective image quality were compared among single-energy images (SEI), SF-CI and SF-MI. CNR and FOM were separately calculated for the liver (e.g. CNR liv ) and the portal vein (CNR pv ). Radiation dose was compared using size-specific dose estimate (SSDE). Results of the three groups were compared using non-parametric tests. Image noise of SF-CI was 18% lower compared to SEI and 48% lower compared to SF-MI (p < 0.001). Composed images yielded higher CNR liv over single-energy images (23.4 vs. 20.9; p < 0.001), whereas CNR pv was significantly lower (3.5 vs. 5.2; p < 0.001). Monoenergetic images overcame this inferiority in CNR pv and achieved similar results compared to single-energy images (5.1 vs. 5.2; p > 0.628). Subjective sharpness was equal between single-energy and monoenergetic images and diagnostic confidence was equal between single-energy and composed images. FOM liv was highest for SF-CI. FOM pv was equal for SEI and SF-MI (p = 0.78). SSDE was significant lower for SF-DECT compared to SECT (p < 0.022). The combined use of split-filter dual-energy CT images provides comparable objective and subjective image quality at lower radiation dose compared to single-energy CT with ATVS. • Split-filter dual-energy results in 18% lower noise compared to single-energy with ATVS. • Split-filter dual-energy results in 11% lower SSDE compared to single-energy with ATVS. • Spectral shaping of split-filter dual-energy leads to an increased dose-efficiency.

B, D and K decays

NASA Astrophysics Data System (ADS)

Buchalla, G.; Komatsubara, T. K.; Muheim, F.; Silvestrini, L.; Artuso, M.; Asner, D. M.; Ball, P.; Baracchini, E.; Bell, G.; Beneke, M.; Berryhill, J.; Bevan, A.; Bigi, I. I.; Blanke, M.; Bobeth, Ch.; Bona, M.; Borzumati, F.; Browder, T.; Buanes, T.; Buchmüller, O.; Buras, A. J.; Burdin, S.; Cassel, D. G.; Cavanaugh, R.; Ciuchini, M.; Colangelo, P.; Crosetti, G.; Dedes, A.; de Fazio, F.; Descotes-Genon, S.; Dickens, J.; Doležal, Z.; Dürr, S.; Egede, U.; Eggel, C.; Eigen, G.; Fajfer, S.; Feldmann, Th.; Ferrandes, R.; Gambino, P.; Gershon, T.; Gibson, V.; Giorgi, M.; Gligorov, V. V.; Golob, B.; Golutvin, A.; Grossman, Y.; Guadagnoli, D.; Haisch, U.; Hazumi, M.; Heinemeyer, S.; Hiller, G.; Hitlin, D.; Huber, T.; Hurth, T.; Iijima, T.; Ishikawa, A.; Isidori, G.; Jäger, S.; Khodjamirian, A.; Koppenburg, P.; Lagouri, T.; Langenegger, U.; Lazzeroni, C.; Lenz, A.; Lubicz, V.; Lucha, W.; Mahlke, H.; Melikhov, D.; Mescia, F.; Misiak, M.; Nakao, M.; Napolitano, J.; Nikitin, N.; Nierste, U.; Oide, K.; Okada, Y.; Paradisi, P.; Parodi, F.; Patel, M.; Petrov, A. A.; Pham, T. N.; Pierini, M.; Playfer, S.; Polesello, G.; Policicchio, A.; Poschenrieder, A.; Raimondi, P.; Recksiegel, S.; Řezníček, P.; Robert, A.; Rosner, J. L.; Ruggiero, G.; Sarti, A.; Schneider, O.; Schwab, F.; Simula, S.; Sivoklokov, S.; Slavich, P.; Smith, C.; Smizanska, M.; Soni, A.; Speer, T.; Spradlin, P.; Spranger, M.; Starodumov, A.; Stech, B.; Stocchi, A.; Stone, S.; Tarantino, C.; Teubert, F.; T'jampens, S.; Toms, K.; Trabelsi, K.; Trine, S.; Uhlig, S.; Vagnoni, V.; van Hunen, J. J.; Weiglein, G.; Weiler, A.; Wilkinson, G.; Xie, Y.; Yamauchi, M.; Zhu, G.; Zupan, J.; Zwicky, R.

2008-09-01

The present report documents the results of Working Group 2: B, D and K decays, of the workshop on Flavor in the Era of the LHC, held at CERN from November 2005 through March 2007. With the advent of the LHC, we will be able to probe New Physics (NP) up to energy scales almost one order of magnitude larger than it has been possible with present accelerator facilities. While direct detection of new particles will be the main avenue to establish the presence of NP at the LHC, indirect searches will provide precious complementary information, since most probably it will not be possible to measure the full spectrum of new particles and their couplings through direct production. In particular, precision measurements and computations in the realm of flavor physics are expected to play a key role in constraining the unknown parameters of the Lagrangian of any NP model emerging from direct searches at the LHC. The aim of Working Group 2 was twofold: on the one hand, to provide a coherent up-to-date picture of the status of flavor physics before the start of the LHC; on the other hand, to initiate activities on the path towards integrating information on NP from high- p T and flavor data. This report is organized as follows: in Sect. 1, we give an overview of NP models, focusing on a few examples that have been discussed in some detail during the workshop, with a short description of the available computational tools for flavor observables in NP models. Section 2 contains a concise discussion of the main theoretical problem in flavor physics: the evaluation of the relevant hadronic matrix elements for weak decays. Section 3 contains a detailed discussion of NP effects in a set of flavor observables that we identified as “benchmark channels” for NP searches. The experimental prospects for flavor physics at future facilities are discussed in Sect. 4. Finally, Sect. 5 contains some assessments on the work done at the workshop and the prospects for future developments.

Sexual rights and gender roles in a religious context.

PubMed

Zaidi, Shahida; Ramarajan, Arulmozhi; Qiu, Renzong; Raucher, Michal; Chadwick, Ruth; Nossier, Amna

2009-08-01

A common feature of the five faiths discussed in this article is change over time. This allowed diversity within the religions, and generally led to a degree of liberalization, but in some faiths or their sects, resulted in a narrow or rigid interpretation. For example, the golden Vedic Period of Hinduism in India when "women were worshipped" gradually faded, ushering in the social evils of female feticide, child marriage, and "sati." The advent of Islam in the seventh century banned female infanticide, but has been unable to abolish many tribal pre-Islamic customs such as female genital mutilation in Africa and "honor killings" in parts of Asia. On the other hand, in China, the inferior status of women accorded by Confucianism has been rectified to a large extent by legislation; this has, however, been offset by a restrictive population policy allowing only one child or two children per couple in some areas of the country (with no limit in Tibet), which has led millions of women to resort to prenatal sex diagnosis and abortion if the fetus is female. In the West, the debate over the use of biomedical technology continues, with various rabbinic rulings permitting the use of assisted reproductive technologies by Jews to fulfill the obligation to procreate, and the Vatican reinforcing its opposition to these and to genetic testing on embryos and embryonic stem cell research.

Potential of Iraqi Local Councils to facilitate Iraqi National Unity

DTIC Science & Technology

2009-06-12

U.S. forces to form a multi-tribal grassroots council involving both sects. Abu Ahmed currently serves as a local contractor in Baghdad. He has...worked with local councils and supported their efforts in reconstruction. Abu Ahmed offers insight into local councils from a unique third...responded on average in agreement when asked whether reform was more effective if local leaders sought to achieve it. Abu Ahmed , a prominent

Reasoning from Incomplete Knowledge

DTIC Science & Technology

1975-03-01

control , and the copulation explosion. T Why didn’t that haonen in Siberia? S Yeah, there’s probably a pretty stronq interaction between the birth ...some parts are predominantly Hindu but most I think is Moslem. Neither of those sects are particularly strong on birth control . Climate differences...the West Coast, birth control from China, climate and food supplies from the difference between Siberia and China, soil and terrain (the latter was

Unfinished Business: The Sons of Iraq and Political Reconciliation

DTIC Science & Technology

2010-03-25

out in the National Strategy for Victory in Iraq. 3 of sectarian cleansing in Baghdad, population centric tactics by CF, and increased... cleansed neighborhoods of one sect or the other as the two sides vied for power. Shia families in Sunni dominated areas packed up as many belongings...and Selected Neighborhoods18 8 The Shia controlled government reinforced JAM’s ethnic cleansing operations through a denial of essential

DI Diesel Performance and Emissions Models

DTIC Science & Technology

2003-06-11

Skeletal mechanism for NOx chemistry in diesel engines ,” SAE Paper 981450, 1998 SAE Transactions, Vol. 107, Sect. 4, J. Fuels and... mechanism for NOx chemistry proposed by Mellor et al. (1998a) is incorporated in an engine simulation code. The two-zone model, also proposed by Mellor et...34Dynamic Application of a Skeletal Mechanism for DI Diesel NOx Emissions," SAE Paper 2001-01-1984, SAE Trans., J. Fuels & Lubricants,

Mapping of the potato leafroll virus resistance gene, Rlretb, from Solanum etuberosum identifies interchromosomal translocations among its E-genome chromosomes 4 and 9 relative to the A-genome of Solanum L. sect. Petota

USDA-ARS?s Scientific Manuscript database

Gene Rlretb, derived from the potato species Solanum etuberosum, confers resistance to potato leafroll virus (PLRV). Mapping of this gene would aid in developing marker-assisted selection protocols to facilitate its introgression into cultivated potato. One RFLP marker and 45 cleaved amplified pol...

Forest Health in the Southeastern United States: Assessment of the State of the Science

DTIC Science & Technology

2008-06-01

pathogens, including imbalances in populations of in- sect pests and root-infesting fungi (e.g., Leptographium species), that may degrade tree physiological...reintroduction exacerbates stress levels and contributes to further root colonization by fungi such as Leptographium sp. Root disease caused by the...Coleoptera: Scolytidae), are likely vectors for the Leptographium/Ophiostomatoid fungi (Eckhardt et al. 2004). Spores of these fungi are not suited to

Convergence and Religious Terrorism in America

DTIC Science & Technology

2004-09-01

William Miller, 18 progenitor of today’s Seventh Day Adventist Church, and Joseph Smith, the founder of the Mormon Church. Despite the apparent...situation as we analyze the formation of present- day cults and sects that diverge from the social norm. We take note, too, of the fact that growth...Bartholomew’s Day Massacre of French Protestants; mass arrests and executions of Protestants across Europe; and persecutions and executions by

Summary of the Bulgarian Provincial Press (31 March - 6 April 1960) (No. 69).

DTIC Science & Technology

1960-07-11

Seventh Day Adventist sect and its ministers in the city. Subsequent issues carry letter...Conference ■^Jflarxist Theory ^ 3 17. SOCIOLOGICAL ITEMS ’^V. ■ - ■- ^ Ao Seventh - Day Adventists ^ Bo Anti-Religious...8217•;■’.,- ...’!. ..;’.’.:’’■’ ’ ^« SOCIOLOGICAL ITEMS’ ’’ A. - Seventh ^ Day / Adventists . There are Seventh Day Adyentists in the city

PCR-based identification of Erysiphe pulchra and Phyllactinia guttata from Cornus florida using ITS-specific primers

Treesearch

M. T. Mmbaga; N. B. Klopfenstein; M. -S. Kim; N. C. Mmbaga

2004-01-01

The internal transcribed spacer (ITS) regions of rDNA and the intervening 5.8S rRNA gene for the powdery mildew fungi Erysiphe (sect. Microsphaera) pulchra and Phyllactinia guttata were amplified using standard polymerase chain reaction (PCR) protocols and the universal primer pairs, ITS1 and ITS4. PCR products for ITS were analysed by electrophoresis in a 1.5% agarose...

The Ethics of Quantification and Why It Doesn't Work; or Life among the Numerologists, Inumerates, and Qualitatives.

ERIC Educational Resources Information Center

Sax, Gilbert

The paper states that quantification is neither ethical nor unethical, but is ethically neutral. It is the behavior or intent of the human being that is clearly a matter of ethical concern. Like numerology and the sects of inumerates and qualitatives, there is not so much an unethical practice that is supported as there is a lack of vision and…

1. Adorni (Cheng 1997a, Sawyer 1981a)

Treesearch

Sheauchi Cheng

2004-01-01

This established RNA is on the Six Rivers National Forest. It lies about 3 miles (5 km) N. of Weitchpec, Humboldt County, covering portions of sects. 25 and 26 T10N, R4E HBM (41°14'N., 123°41'W.), USGS Weitchpec quad (fig. 3). Ecological subsections – Gasquet Mountain Ultramafics (M261Ab) and Eastern Franciscan (M261Ba).

Aspherical-atom modeling of coordination compounds by single-crystal X-ray diffraction allows the correct metal atom to be identified.

PubMed

Dittrich, Birger; Wandtke, Claudia M; Meents, Alke; Pröpper, Kevin; Mondal, Kartik Chandra; Samuel, Prinson P; Amin Sk, Nurul; Singh, Amit Pratap; Roesky, Herbert W; Sidhu, Navdeep

2015-02-02

Single-crystal X-ray diffraction (XRD) is often considered the gold standard in analytical chemistry, as it allows element identification as well as determination of atom connectivity and the solid-state structure of completely unknown samples. Element assignment is based on the number of electrons of an atom, so that a distinction of neighboring heavier elements in the periodic table by XRD is often difficult. A computationally efficient procedure for aspherical-atom least-squares refinement of conventional diffraction data of organometallic compounds is proposed. The iterative procedure is conceptually similar to Hirshfeld-atom refinement (Acta Crystallogr. Sect. A- 2008, 64, 383-393; IUCrJ. 2014, 1,61-79), but it relies on tabulated invariom scattering factors (Acta Crystallogr. Sect. B- 2013, 69, 91-104) and the Hansen/Coppens multipole model; disordered structures can be handled as well. Five linear-coordinate 3d metal complexes, for which the wrong element is found if standard independent-atom model scattering factors are relied upon, are studied, and it is shown that only aspherical-atom scattering factors allow a reliable assignment. The influence of anomalous dispersion in identifying the correct element is investigated and discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A revision of Poa subsection Aphanelytrum (Poaceae, Pooideae, Poaeae, Poinae); and a new species, Poa auriculata

PubMed Central

Peterson, Paul M.; Soreng, Robert J.

2016-01-01

Abstract In this study the peculiar Andean grass genus Aphanelytrum, with two species, is reduced to Poa subsect. Aphanelytrum comb. & stat. nov. A third species, Festuca reclinata, is assigned to the subsection, which shows states transitional between a more typical Poa and Aphanelytrum. Poa subgen. Poa supersect. Homalopoa sect. Dioicopoa subsect. Aphanelytrum comb. & stat. nov. is characterized in having stooling perennials with decumbent to spreading culm bases that continuously branch and often root at low to mid-culm nodes, glabrous spikelets with long rachillas 1.2–4.2 mm long, short glumes less than ½ the length of the florets, and lemmas with bifid apexes that are mucronate to short-awned. We provide for the three species taxonomic discussions, morphological and anatomical descriptions, keys, illustrations, and a list of specimens. Also, we provide two new names, Poa hitchcockiana nom. nov. and Poa sanchez-vegae nom. nov., and one new combination, Poa reclinata comb. nov. A new species, Poa auriculata sp. nov. from Peru, not thought to be a member of Poa subsect. Aphanelytrum, is presented. It is the first in the genus with prominent auricles. In addition, we place Poa apiculata in Poa subgen. Poa supersect. Homalopoa sect. Dioicopoa subsect. Tovarochloa comb. & stat. nov. PMID:27489482

Time Series Model Identification by Estimating Information, Memory, and Quantiles.

DTIC Science & Technology

1983-07-01

Standards, Sect. D, 68D, 937-951. Parzen, Emanuel (1969) "Multiple time series modeling" Multivariate Analysis - II, edited by P. Krishnaiah , Academic... Krishnaiah , North Holland: Amsterdam, 283-295. Parzen, Emanuel (1979) "Forecasting and Whitening Filter Estimation" TIMS Studies in the Management...principle. Applications of Statistics, P. R. Krishnaiah , ed. North Holland: Amsterdam, 27-41. Box, G. E. P. and Jenkins, G. M. (1970) Time Series Analysis

Factors of Religious Violence and a Path to Peace: A Study of the 16th Century Anabaptists

DTIC Science & Technology

2015-06-01

45 Figure 11. Clauset, Newman , Moore Grouping of the Overall 16th Century Leadership Network...access to an enormous amount of information. Additionally, I would like to thank my parents for being a sounding board of ideas, as well as helping to...have left another religious group (it could be a church or sect) to “correct” the beliefs of the parent religious group

Military Use of the International Space Station

DTIC Science & Technology

1988-11-01

profile projects. Touting the attributes of any military system publicly hardly comported with the peaceful image the Administration was trying to...Authorization Act for Fiscal Years 1988 and 1989 , Pub. L. No. 100-180, 101 Stat. 1019, Sect. 255 (1987). 53DoD, Potential Department of Defense Use of a...requirement to consult with its partners, what it wants to do, whether the activity comports with international law, and how it will carry out the

69. Red Butte-Red Fir Ridge (Shasta Red Fir) (Imper 1988b, Cheng 1996d)

Treesearch

Sheauchi Cheng

2004-01-01

This established RNA is located on the Shasta-Trinity National Forest. The area is about 6.5 miles (10.5 km) N. of McCloud and occupies portions of sects. 33, 34, 35, and 36 T41N, R3W MDBM (41°21'N., 122°10'W.), USGS Mt. Shasta quad (fig. 139). Ecological subsection – High Cascades (M261Df).

STS/SCA/AmSECT Clinical Practice Guidelines: Anticoagulation during Cardiopulmonary Bypass.

PubMed

Shore-Lesserson, Linda; Baker, Robert A; Ferraris, Victor; Greilich, Philip E; Fitzgerald, David; Roman, Philip; Hammon, John

2018-03-01

Despite more than a half century of "safe" cardiopulmonary bypass (CPB), the evidence base surrounding the conduct of anticoagulation for CPB has not been organized into a succinct guideline. For this and other reasons, there is enormous practice variability relating to the use and dosing of heparin, monitoring heparin anticoagulation, reversal of anticoagulation, and the use of alternative anticoagulants. To address this and other gaps, the Society of Thoracic Surgeons (STS), the Society of Cardiovascular Anesthesiologists (SCA), and the American Society of Extracorporeal Technology (AmSECT) developed an Evidence Based Workgroup. This was a group of interdisciplinary professionals gathered together to summarize the evidence and create practice recommendations for various aspects of CPB. To date, anticoagulation practices in CPB have not been standardized in accordance with the evidence base. This clinical practice guideline was written with the intent to fill the evidence gap and to establish best practices in anticoagulation for CPB using the available evidence. To identify relevant evidence a systematic review was outlined and literature searches were conducted in PubMed® using standardized MeSH terms from the National Library of Medicine list of search terms. Search dates were inclusive of January 2000 to December 2015. The search yielded 833 abstracts which were reviewed by two independent reviewers. Once accepted into the full manuscript review stage, two members of the writing group evaluated each of 286 full papers for inclusion eligibility into the guideline document. Ninety-six manuscripts were included in the final review. In addition, 17 manuscripts published prior to 2000 were included to provide method, context, or additional supporting evidence for the recommendations as these papers were considered sentinel publications. Members of the writing group wrote and developed recommendations based on review of the articles obtained and achieved more than two thirds agreement on each recommendation. The quality of information for a given recommendation allowed assessment of the level of evidence as recommended by the AHA/ACCF Task Force on Practice Guidelines. Recommendations were written in the three following areas 1) Heparin dosing and monitoring for initiation and maintenance of CPB, 2) Heparin contraindications and heparin alternatives, 3) Reversal of anticoagulation during cardiac operations. It is hoped that this guideline will serve as a resource and will stimulate investigators to conduct more research and expand upon the evidence base on the topic of anticoagulation for CPB.

The effect of religious, cultural and social identity on population genetic structure among Muslims in Pakistan.

PubMed

Hussain, R

2005-01-01

Knowledge of historical demography and contemporary social stratification can be valuable in understanding disease patterns, including genetic disorders, especially in communities that have a high prevalence of endogamous and/or consanguineous marriages. This paper provides a background to the religious, historical and socio-cultural factors that have helped define the bounds of endogamy for Muslims in undivided India and more specifically since the creation of Pakistan. The preference for endogamous marriage is based on the clan-oriented nature of the society, which values and actively seeks similarities in social group identity based on several factors, including religious, sectarian, ethnic, and tribal/clan affiliation. Religious affiliation is itself multi-layered and includes religious considerations other than being Muslim, such as sectarian identity (e.g. Shia or Sunni, etc.) and religious orientation within the sect (Isnashari, Ismaili, Ahmedi, etc.). Both ethnic affiliation (e.g. Sindhi, Baloch, Punjabi, etc.) and membership of specific biraderis or zat/quoms are additional integral components of social identity. Within the bounds of endogamy defined by the above parameters, close consanguineous unions are preferential due to a congruence of key features of group- and individual-level background factors.

Elements of the Iraqi Insurgency and the Role of Security for Achieving Victory in Iraq

DTIC Science & Technology

2006-07-15

context, it is important to note that Iraq is still a very young nation, particularly when viewed thru the prism of ancient Mesopotamian cultures ...ethnic groups, two major languages, two competitive sects of Islam; and with a communal culture numbering hundreds of tribes.5 With the collective force...a better understanding of the Iraqi culture , see William R. Polk, Understanding Iraq, (New York, Harper Collins, 2005) 3 stabilize the security

Nigeria and the Boko Haram Sect: Adopting a Better Strategy for Resolving the Crisis

DTIC Science & Technology

2013-06-01

questions will allow for the identification of a solution-based framework that requires a well formulated plan, is effectively communicated , and effectively...Muslim community in the long run.59 The declaration of Muslims as takfirs is frequently a stepping-stone to violence. Many Boko Haram adherents and... communities . However, many of the foot soldiers have now joined the leadership which has since re-prioritized their interests (that is, experienced a

New Porcini (Boletus sect. Boletus) from Australia and Thailand.

PubMed

Halling, Roy E; Desjardin, Dennis E; Fechner, Nigel; Arora, David; Soytong, Kasem; Dentinger, Bryn T M

2014-01-01

Boletus albobrunnescens and B. austroedulis are described as new species in section Boletus from Thailand and Australia respectively. The former is easily characterized by the pure white basidiomata that stain brown. Boletus austroedulis has a gray-brown, slightly rugulose pileus with hymeniform pileipellis producing pileocystidia, and the stipe is only apically reticulate if at all. These new species represent ancient lineages inferred from prior molecular phylogenetic analyses. © 2014 by The Mycological Society of America.

The Efficiency of Delone Coverings of the Canonical Tilings T^*(A4) and T^*(D6)

NASA Astrophysics Data System (ADS)

Papadopolos, Zorka; Kasner, Gerald

This chapter is devoted to the coverings of the two quasiperiodic canonical tilings T^*(A4) and T^*(D6) T^*(2F), obtained by projection from the root lattices A4 and D6, respectively. In the first major part of this chapter, in Sect. 5.2, we shall introduce a Delone covering C^sT^*(A4) of the 2-dimensional decagonal tiling T^*(A4). In the second major part of this chapter, Sect. 5.3, we summarize the results related to the Delone covering of the icosahedral tiling T^*(D6), CT^*(D6) and determine the zero-, single-, and double- deckings and the resulting thickness of the covering. In the conclusions section, we give some suggestions as to how the definition of the Delone covering might be changed in order to reach some real (full) covering of the icosahedral tiling T^*(D6). In Section 5.2 the definition of the Delone covering is also changed in order to avoid an unnecessary large thickness of the covering.

The identity of Penicillium sp. 1, a major contaminant of the stone chambers in the Takamatsuzuka and Kitora Tumuli in Japan, is Penicillium paneum.

PubMed

An, Kwang-Deuk; Kiyuna, Tomohiko; Kigawa, Rika; Sano, Chie; Miura, Sadatoshi; Sugiyama, Junta

2009-11-01

Penicillium appeared as the major dweller in the Takamatsuzuka Tumulus (TT) and Kitora Tumulus (KT) stone chambers, both located in the village of Asuka, Nara Prefecture, in relation to the biodeterioration of the 1,300-year-old mural paintings, plaster walls and ceilings. Of 662 Penicillium isolates from 373 samples of the TT (sampling period, May 2004-2007) and the KT (sampling period, June 2004-Sep 2007), 181 were phenotypically assigned as Penicillium sp. 1 which shared similar phenotypic characteristics of sect. Roqueforti in Penicillium subg. Penicillium. Fifteen representative isolates of Penicillium sp. 1, 13 from TT and 2 from KT, were selected for molecular phylogenetic analysis. The 28S rDNA D1/D2, ITS, beta-tubulin, and lys2 gene sequence-based phylogenies clearly demonstrated that the three known species P. roqueforti, P. carneum and P. paneum in sect. Roqueforti, and all TT and KT isolates grouped together. In addition to this, TT and KT isolates formed a monophyletic group with the ex-holotype strain CBS 101032 of P. paneum Frisvad with very strong bootstrap supports. So far, P. paneum has been isolated only from mouldy rye breads, other foods, and baled grass silage. Therefore, this is the first report of P. paneum isolation from samples relating to the biodeteriorated cultural properties such as mural paintings on plaster walls.

Experimental verification of stopping-power prediction from single- and dual-energy computed tomography in biological tissues

NASA Astrophysics Data System (ADS)

Möhler, Christian; Russ, Tom; Wohlfahrt, Patrick; Elter, Alina; Runz, Armin; Richter, Christian; Greilich, Steffen

2018-01-01

An experimental setup for consecutive measurement of ion and x-ray absorption in tissue or other materials is introduced. With this setup using a 3D-printed sample container, the reference stopping-power ratio (SPR) of materials can be measured with an uncertainty of below 0.1%. A total of 65 porcine and bovine tissue samples were prepared for measurement, comprising five samples each of 13 tissue types representing about 80% of the total body mass (three different muscle and fatty tissues, liver, kidney, brain, heart, blood, lung and bone). Using a standard stoichiometric calibration for single-energy CT (SECT) as well as a state-of-the-art dual-energy CT (DECT) approach, SPR was predicted for all tissues and then compared to the measured reference. With the SECT approach, the SPRs of all tissues were predicted with a mean error of (-0.84  ±  0.12)% and a mean absolute error of (1.27  ±  0.12)%. In contrast, the DECT-based SPR predictions were overall consistent with the measured reference with a mean error of (-0.02  ±  0.15)% and a mean absolute error of (0.10  ±  0.15)%. Thus, in this study, the potential of DECT to decrease range uncertainty could be confirmed in biological tissue.

Data Streams: An Overview and Scientific Applications

NASA Astrophysics Data System (ADS)

Aggarwal, Charu C.

In recent years, advances in hardware technology have facilitated the ability to collect data continuously. Simple transactions of everyday life such as using a credit card, a phone, or browsing the web lead to automated data storage. Similarly, advances in information technology have lead to large flows of data across IP networks. In many cases, these large volumes of data can be mined for interesting and relevant information in a wide variety of applications. When the volume of the underlying data is very large, it leads to a number of computational and mining challenges: With increasing volume of the data, it is no longer possible to process the data efficiently by using multiple passes. Rather, one can process a data item at most once. This leads to constraints on the implementation of the underlying algorithms. Therefore, stream mining algorithms typically need to be designed so that the algorithms work with one pass of the data. In most cases, there is an inherent temporal component to the stream mining process. This is because the data may evolve over time. This behavior of data streams is referred to as temporal locality. Therefore, a straightforward adaptation of one-pass mining algorithms may not be an effective solution to the task. Stream mining algorithms need to be carefully designed with a clear focus on the evolution of the underlying data. Another important characteristic of data streams is that they are often mined in a distributed fashion. Furthermore, the individual processors may have limited processing and memory. Examples of such cases include sensor networks, in which it may be desirable to perform in-network processing of data stream with limited processing and memory [1, 2]. This chapter will provide an overview of the key challenges in stream mining algorithms which arise from the unique setup in which these problems are encountered. This chapter is organized as follows. In the next section, we will discuss the generic challenges that stream mining poses to a variety of data management and data mining problems. The next section also deals with several issues which arise in the context of data stream management. In Sect. 3, we discuss several mining algorithms on the data stream model. Section 4 discusses various scientific applications of data streams. Section 5 discusses the research directions and conclusions.

Assessment of Waco, Texas FLIR videotape

NASA Astrophysics Data System (ADS)

Frankel, Donald S.

2001-09-01

The FLIR video recorded by the FBI on 19 April 1993, records the final assault on the Branch Davidian compound in Waco, Texas, and the fire in which some 80 members of the sect died. Attention has focused on a number of flashes recorded on the videotape. The author has examined the 1993 videotape and the recorded videotapes of the re-enactment conducted at Fort Hood, Texas on 19 March 2000. The following conclusions have been reached: 1) The flashes seen on the tape cannot be weapons muzzle flash. Their duration is far too long and their spatial extent is far too great. They are almost certainly the result of solar energy or heat energy form nearby vehicles reflected toward the FLIR by debris or puddles. 2) The FLIR video technology has a very low probability of detecting small arms muzzle flash. 3) As a consequence of 2) above, the absence of muzzle flash detection on the FLIR tape does not prove that no weapons were actually fired during the final assault. Indeed, there is ample evidence (not presented here) that the Davidians fired at the federal agents, but none of their muzzle flashes are detectable on the videotape.

Co-citation Network Analysis of Religious Texts

NASA Astrophysics Data System (ADS)

Murai, Hajime; Tokosumi, Akifumi

This paper introduces a method of representing in a network the thoughts of individual authors of dogmatic texts numerically and objectively by means of co-citation analysis and a method of distinguishing between the thoughts of various authors by clustering and analysis of clustered elements, generated by the clustering process. Using these methods, this paper creates and analyzes the co-citation networks for five authoritative Christian theologians through history (Augustine, Thomas Aquinas, Jean Calvin, Karl Barth, John Paul II). These analyses were able to extract the core element of Christian thought (Jn 1:14, Ph 2:6, Ph 2:7, Ph 2:8, Ga 4:4), as well as distinctions between the individual theologians in terms of their sect (Catholic or Protestant) and era (thinking about the importance of God's creation and the necessity of spreading the Gospel). By supplementing conventional literary methods in areas such as philosophy and theology, with these numerical and objective methods, it should be possible to compare the characteristics of various doctrines. The ability to numerically and objectively represent the characteristics of various thoughts opens up the possibilities of utilizing new information technology, such as web ontology and the Artificial Intelligence, in order to process information about ideological thoughts in the future.

Dual-Energy Computed Tomography for the Characterization of Intracranial Hemorrhage and Calcification: A Systematic Approach in a Phantom System.

PubMed

Nute, Jessica L; Jacobsen, Megan C; Chandler, Adam; Cody, Dianna D; Schellingerhout, Dawid

2017-01-01

The aim of this study was to develop a diagnostic framework for distinguishing calcific from hemorrhagic cerebral lesions using dual-energy computed tomography (DECT) in an anthropomorphic phantom system. An anthropomorphic phantom was designed to mimic the CT imaging characteristics of the human head. Cylindrical lesion models containing either calcium or iron, mimicking calcification or hemorrhage, respectively, were developed to exhibit matching, and therefore indistinguishable, single-energy CT (SECT) attenuation values from 40 to 100 HU. These lesion models were fabricated at 0.5, 1, and 1.5 cm in diameter and positioned in simulated cerebrum and skull base locations within the anthropomorphic phantom. All lesion sizes were modeled in the cerebrum, while only 1.5-cm lesions were modeled in the skull base. Images were acquired using a GE 750HD CT scanner and an expansive dual-energy protocol that covered variations in dose (36.7-132.6 mGy CTDIvol, n = 12), image thickness (0.625-5 mm, n = 4), and reconstruction filter (soft, standard, detail, n = 3) for a total of 144 unique technique combinations. Images representing each technique combination were reconstructed into water and calcium material density images, as well as a monoenergetic image chosen to mimic the attenuation of a 120-kVp SECT scan. A true single-energy routine brain protocol was also included for verification of lesion SECT attenuation. Points representing the 3 dual-energy reconstructions were plotted into a 3-dimensional space (water [milligram/milliliter], calcium [milligram/milliliter], monoenergetic Hounsfield unit as x, y, and z axes, respectively), and the distribution of points analyzed using 2 approaches: support vector machines and a simple geometric bisector (GB). Each analysis yielded a plane of optimal differentiation between the calcification and hemorrhage lesion model distributions. By comparing the predicted lesion composition to the known lesion composition, we identified the optimal combination of CTDIvol, image thickness, and reconstruction filter to maximize differentiation between the lesion model types. To validate these results, a new set of hemorrhage and calcification lesion models were created, scanned in a blinded fashion, and prospectively classified using the planes of differentiation derived from support vector machine and GB methods. Accuracy of differentiation improved with increasing dose (CTDIvol) and image thickness. Reconstruction filter had no effect on the accuracy of differentiation. Using an optimized protocol consisting of the maximum CTDIvol of 132.6 mGy, 5-mm-thick images, and a standard filter, hemorrhagic and calcific lesion models with equal SECT attenuation (Hounsfield unit) were differentiated with over 90% accuracy down to 70 HU for skull base lesions of 1.5 cm, and down to 100 HU, 60 HU, and 60 HU for cerebrum lesions of 0.5, 1.0, and 1.5 cm, respectively. The analytic method that yielded the best results was a simple GB plane through the 3-dimensional DECT space. In the validation study, 96% of unknown lesions were correctly classified across all lesion sizes and locations investigated. We define the optimal scan parameters and expected limitations for the accurate classification of hemorrhagic versus calcific cerebral lesions in an anthropomorphic phantom with DECT. Although our proposed DECT protocol represents an increase in dose compared with routine brain CT, this method is intended as a specialized evaluation of potential brain hemorrhage and is thus counterbalanced by increased diagnostic benefit. This work provides justification for the application of this technique in human clinical trials.

Kinetics and Mechanism of Chemical Marker Formation and Water-Activated Heat Generation

DTIC Science & Technology

1994-05-01

activated chemical heaters. It has recently been discovered at the Army’s Natick, Massachusetts Research, Development & Engineering Center that certain...FUNDING NUMBERS 0 i Kinetics and Mechanism of Chemical Marker Formation and Water-Activated Heat Generation ~~ 3 6. AUTHOR(S) I-GZ05 Kenneth Kustin DI N...unlimited. rpIC Q.UA y uI sECTED 5 13. ABSTRACT (Maximum 200 words) n Research has been conducted on two projects: intrinsic chemical markers and water

Insurgency in Ancient Times: The Jewish Revolts Against the Seleucid and Roman Empires, 166 BC-73 AD

DTIC Science & Technology

2005-05-26

apocalyptic doctrine. One particular sect of the Essenes was the Qumran which is fairly well known today because they are believed to be the authors of...the Dead Sea Scrolls. The Qumran is believed to have come into existence in the late Hasmonean period and they are illustrative of one of many...Jewish nation. The Qumran also refers to a Teacher of Righteousness, who is a priest and a prophet. Additionally, this individual is referred to in

USSR Report: Military Affairs, No. 1777, Communist of the Armed Forces

DTIC Science & Technology

1983-06-28

achieve significant successes in the socialist competition, to greet the 60th anni- versary of the founding of the USSR with new achievements in the...of the socialist economy. Rural and urban workers and fight- ingmen of the army and navy greeted the 60th anniversary of the founding of the USSR with...moment mentally to the sect. He recalled a certain incident. One of the visitors to the house of prayer had stuck his hand into the treasury. He soon

East Europe Report: Political, Sociological and Military Affairs, Number 2086

DTIC Science & Technology

1982-12-15

the problems that are at present experienced by Poland. Attempts at interfering in our internal affairs, using pressures and extortion by means of...representatives of the church and religious sects and antisocial groups in the CSSR. All of this urges us on to greater concern about the young...principle of "whoever is not against us is with us ," and also because of the widely held view that this man is thousand times better than any kind of a

Strategic Culture and Strategic Studies: An Alternative Framework for Assessing al-Qaeda and the Global Jihad Movement

DTIC Science & Technology

2012-05-01

Muslims to liberate them from human rulers and their false laws, values, and traditions. Like other major religions , Islam has several sects. The...costs of failing to do so. They approach the development of strategy in their writings in a sec- ular tone that sets religion aside (but does not take...and methods of engagement are in accord with operational realit[ y ]… that calls for the independent formation and activation of [global] resistance

Computation of Calcium Score with Dual Energy CT: A Phantom Study

PubMed Central

Kumar, Vidhya; Min, James K.; He, Xin; Raman, Subha V.

2016-01-01

Dual energy computed tomography (DECT) improves material and tissue characterization compared to single energy CT (SECT); we sought to validate coronary calcium quantification in advancing cardiovascular DECT. In an anthropomorphic phantom, agreement between measurements was excellent, and Bland-Altman analysis demonstrated minimal bias. Compared to the known calcium mass for each phantom, calcium mass by DECT was highly accurate. Noncontrast DECT yields accurate calcium measures, and warrants consideration in cardiac protocols for additional tissue characterizations. PMID:27680414

The U.S. Andean Drug Strategy: Why it is Failing in Peru

DTIC Science & Technology

1993-12-01

Area 22c. OFFICE SYMBOL Thomas C. Bruneau C(,le) Code NS/Be (408) 656-2521 DD 1O 1473. 84 MAR 83 APR edton may be tued until exhauted SECT Ri...which is ethnically and culturall divided, with a substantially wide margin existing between state authority and rural social autonomy. This...reduces or eliminates the illegitimate activity. States which are internally weak in any of these areas become susceptible to a variety of social and

The National Shipbuilding Research Program. Following Development of the Federal Effluent Guidelines for Metal Products and Machinery Facilities

DTIC Science & Technology

1999-02-01

Cleaning Rules to Shipyards SDO\\SECT1 1-1 1. Introduction Background The Federal Clean Water Act (CWA) established a program to restore and maintain the...2-1 2. MP&M Rulemaking Process EPA Categorical Discharge Standards Program The Clean Water Act established a program to restore and... microfiltration and reverse osmosis. • Oil and grease content is used as a surrogate for monitoring toxic organics. • The technical and financial

Pavement Maintenance Management for Roads and Parking Lots.

DTIC Science & Technology

1981-10-01

PAVEMENT INSPECTION SHEET aRANCH SECT ION DA TE SAMPLE UNIT SURVEYED BY SLAB SIZE * 0 0 0 Distress Types !0 2f Blow- Up 3’ Polished Buckling/Shattering...10 21 Blow- up 31 Poisnec Buckling/Shatternrg Aggregate 0 1 22. Corner Break 32 Porouis 23. D’viOea SIcD 33 Ptmo,nq 9 24 Durability . " 34 Pancnout...Load Durability Drainage Other Factors Corner Break Blow- up Corner Break Faulting Divided Slab Ŕ" Cracking Divided Slab Lane/Shoulder Dropoff

Countering Transnational Terrorism in Southeast Asia with Respect to Terrorism in Indonesia and the Philippines

DTIC Science & Technology

2003-12-01

Jewish sect that fought the Roman occupation of what is now the state of Israel between 66-73AD, or the “Thugs”, an Indian association of...and cell formation. At the heart of their recruitment was the Al Tarbiyah Luminal Hakiem Islamic boarding School outside the southern Malaysian ...city of Johor Baru that was purchased in the mid-1990. The school master, Ali Guhfron, later became the head of the Jamaah Islamiah’s (JI) Malaysian

Typification of Zapałowicz’s names in Aconitum section Aconitum

PubMed Central

Wacławska-Ćwiertnia, Klaudia; Mitka, Józef

2016-01-01

Abstract Hugo Zapałowicz described and named 27 taxa in Aconitum sect. Aconitum. Their names are typified here. Two of them (Aconitum berdaui, Aconitum bucovinense) are deemed correct for currently accepted species of the Carpathians, 24 are reduced to synonymy under five taxa, and for one no original material has been located. The correct place and exact date of their publication, which differs from those usually assumed, have been ascertained by bibliographic verification and the study of archival documents. PMID:26884711

Parametric Blade Study Test Report Rotor Configuration. Number 4

DTIC Science & Technology

1988-11-01

Figure 2. The rotor shaft is mounted on an oil-damped roller bearing at the forward location and a ball bearing at the aft location; radial runout does...thermodynamic properties. 22 d. Corrections were made to measured compressor temperatures and pressures, facility flowrate, and rotor wheel speed to...1152 .Z660 .1024 STRM- BLADE BLADE WHEEL LINE SECT. LEAN SPEED NUMBER ANGLE ANGLE 1 -55.15 7.32 1497.9 2 -53.85 8.09 1434.7 3 -52.96 7.11 1372.1 4

Parametric Blade Study Test Report Rotor Configuration. Number 1

DTIC Science & Technology

1988-11-01

location and a ball bearing at the aft location; radial runout does not exceed 0.001 inch. Forward and aft buffer controlled gap carbon seals were used...made to measured compressor temperatures and pressures, facility flowrate, and rotor wheel speed to correspond to standard inlet conditions of...0662 .1034 STRM- BLADE BLADE WHEEL LINE SECT. LEAN SPEED NUMBER ANGLE ANGLE I -53.96 7.35 1497.5 2 -52.68 8.11 1434.6 3 -51.88 7.15 1372.5 4 -50.49

A Survey of Probabilistic Methods for Dynamical Systems with Uncertain Parameters.

DTIC Science & Technology

1986-05-01

J., "An Approach to the Theoretical Background of Statistical Energy Analysis Applied to Structural Vibration," Journ. Acoust. Soc. Amer., Vol. 69...1973, Sect. 8.3. 80. Lyon, R.H., " Statistical Energy Analysis of Dynamical Systems," M.I.T. Press, 1975. e) Late References added in Proofreading !! 81...Dowell, E.H., and Kubota, Y., "Asymptotic Modal Analysis and ’~ y C-" -165- Statistical Energy Analysis of Dynamical Systems," Journ. Appi. - Mech

Sociocultural Characteristic, Lifestyle, and Metabolic Risk Factors Among a Sample of Kuwaiti Male University Students

PubMed Central

Al-Sejari, Maha

2016-01-01

In the past six decades, the Kuwaiti population has been exposed to rapid transformation in the quality of diet intake, daily activities, and career types. This major socioeconomic shift was accompanied by the introduction of both communicable and noncommunicable chronic diseases afflicting people of all ages. This article aims to detect a relationship between sociocultural characteristics—such as physical activity, dietary habits, and smoking—and the prevalence of metabolic syndrome (MetS). A descriptive, cross-sectional survey was conducted among 262 male university students in Kuwait; participants were selected by using a convenient nonrandom opportunistic sample. Associated social and health factors were obtained using a closed-ended questionnaire. BMI and blood tests that include clusters of MetS risk components were drawn from participants in primary health care clinics. More than half of the participants were overweight and obese; 74.4% of the participants reported they did not visit a nutritionist; 69.8% said that they are currently not on a diet; 53.4% of the students were nonsmokers; 42.7% reported moderate to very low daily physical activity. The prevalence of MetS components increased among students with older age, employed, and married (p < .001), higher BMI, higher income, smoking, fewer number of family members living, and belonging to the Shia religious sect (p < .05). The high frequency of MetS among younger students needs to be considered by Kuwaiti community members and the government to highlight the risk factors of MetS on individuals’ well-being, quality of life, and life expectation. PMID:27903953

Sociocultural Characteristic, Lifestyle, and Metabolic Risk Factors Among a Sample of Kuwaiti Male University Students.

PubMed

Al-Sejari, Maha

2017-03-01

In the past six decades, the Kuwaiti population has been exposed to rapid transformation in the quality of diet intake, daily activities, and career types. This major socioeconomic shift was accompanied by the introduction of both communicable and noncommunicable chronic diseases afflicting people of all ages. This article aims to detect a relationship between sociocultural characteristics-such as physical activity, dietary habits, and smoking-and the prevalence of metabolic syndrome (MetS). A descriptive, cross-sectional survey was conducted among 262 male university students in Kuwait; participants were selected by using a convenient nonrandom opportunistic sample. Associated social and health factors were obtained using a closed-ended questionnaire. BMI and blood tests that include clusters of MetS risk components were drawn from participants in primary health care clinics. More than half of the participants were overweight and obese; 74.4% of the participants reported they did not visit a nutritionist; 69.8% said that they are currently not on a diet; 53.4% of the students were nonsmokers; 42.7% reported moderate to very low daily physical activity. The prevalence of MetS components increased among students with older age, employed, and married ( p < .001), higher BMI, higher income, smoking, fewer number of family members living, and belonging to the Shia religious sect ( p < .05). The high frequency of MetS among younger students needs to be considered by Kuwaiti community members and the government to highlight the risk factors of MetS on individuals' well-being, quality of life, and life expectation.

The first fossil of a bolbitidoid fern belongs to the early-divergent lineages of Elaphoglossum (Dryopteridaceae).

PubMed

Lóriga, Josmaily; Schmidt, Alexander R; Moran, Robbin C; Feldberg, Kathrin; Schneider, Harald; Heinrichs, Jochen

2014-09-01

• Closing gaps in the fossil record and elucidating phylogenetic relationships of mostly incomplete fossils are major challenges in the reconstruction of the diversification of fern lineages through time. The cosmopolitan family Dryopteridaceae represents one of the most species-rich families of leptosporangiate ferns, yet its fossil record is sparse and poorly understood. Here, we describe a fern inclusion in Miocene Dominican amber and investigate its relationships to extant Dryopteridaceae.• The morphology of the fossil was compared with descriptions of extant ferns, resulting in it being tentatively assigned to the bolbitidoid fern genus Elaphoglossum. This assignment was confirmed by reconstructing the evolution of the morphological characters preserved in the inclusion on a molecular phylogeny of 158 extant bolbitidoid ferns. To assess the morphology-based assignment of the fossil to Elaphoglossum, we examined DNA-calibrated divergence time estimates against the age of the amber deposits from which it came.• The fossil belongs to Elaphoglossum and is the first of a bolbitidoid fern. Its assignment to a particular section of Elaphoglossum could not be determined; however, sects. Lepidoglossa, Polytrichia, and Setosa can be discounted because the fossil lacks subulate scales or scales with acicular marginal hairs. Thus, the fossil might belong to either sects. Amygdalifolia, Wrightiana, Elaphoglossum, or Squamipedia or to an extinct lineage.• The discovery of a Miocene Elaphoglossum fossil provides remarkable support to current molecular clock-based estimates of the diversification of these ferns. © 2014 Botanical Society of America, Inc.

Influence of Culturing Conditions on Bioprospecting and the Antimicrobial Potential of Endophytic Fungi from Schinus terebinthifolius.

PubMed

Tonial, Fabiana; Maia, Beatriz H L N S; Gomes-Figueiredo, Josiane A; Sobottka, Andrea M; Bertol, Charise D; Nepel, Angelita; Savi, Daiani C; Vicente, Vânia A; Gomes, Renata R; Glienke, Chirlei

2016-02-01

In this study, we analyzed the antimicrobial activity of extracts harvested from 17 endophytic fungi isolated from the medicinal plant Schinus terebinthifolius. Morphological and molecular analyses indicated that these fungal species belonged to the genera Alternaria, Bjerkandera, Colletotrichum, Diaporthe, Penicillium, and Xylaria. Of the endophytes analyzed, 64.7 % produced antimicrobial compounds under at least one of the fermentation conditions tested. Nine isolates produced compounds that inhibited growth of Staphylococcus aureus, four produced compounds that inhibited Candida albicans, and two that inhibited Pseudomonas aeruginosa. The fermentation conditions of the following endophytes were optimized: Alternaria sp. Sect. Alternata-LGMF626, Xylaria sp.-LGMF673, and Bjerkandera sp.-LGMF713. Specifically, the carbon and nitrogen sources, initial pH, temperature, and length of incubation were varied. In general, production of antimicrobial compounds was greatest when galactose was used as a carbon source, and acidification of the growth medium enhanced the production of compounds that inhibited C. albicans. Upon large-scale fermentation, Alternaria sp. Sect. Alternata-LGMF626 produced an extract containing two fractions that were active against methicillin-resistant S. aureus. One of the extracts exhibited high activity (minimum inhibitory concentration of 18.52 µg/mL), and the other exhibited moderate activity (minimum inhibitory concentration of 55.55 µg/mL). The compounds E-2-hexyl-cinnamaldehyde and two compounds of the pyrrolopyrazine alkaloids class were identified in the active fractions by gas chromatography-mass spectrometry.

Sorting through the chaff, nDNA gene trees for phylogenetic inference and hybrid identification of annual sunflowers (Helianthus sect. Helianthus).

PubMed

Moody, Michael L; Rieseberg, Loren H

2012-07-01

The annual sunflowers (Helianthus sect. Helianthus) present a formidable challenge for phylogenetic inference because of ancient hybrid speciation, recent introgression, and suspected issues with deep coalescence. Here we analyze sequence data from 11 nuclear DNA (nDNA) genes for multiple genotypes of species within the section to (1) reconstruct the phylogeny of this group, (2) explore the utility of nDNA gene trees for detecting hybrid speciation and introgression; and (3) test an empirical method of hybrid identification based on the phylogenetic congruence of nDNA gene trees from tightly linked genes. We uncovered considerable topological heterogeneity among gene trees with or without three previously identified hybrid species included in the analyses, as well as a general lack of reciprocal monophyly of species. Nonetheless, partitioned Bayesian analyses provided strong support for the reciprocal monophyly of all species except H. annuus (0.89 PP), the most widespread and abundant annual sunflower. Previous hypotheses of relationships among taxa were generally strongly supported (1.0 PP), except among taxa typically associated with H. annuus, apparently due to the paraphyly of the latter in all gene trees. While the individual nDNA gene trees provided a useful means for detecting recent hybridization, identification of ancient hybridization was problematic for all ancient hybrid species, even when linkage was considered. We discuss biological factors that affect the efficacy of phylogenetic methods for hybrid identification.

Rediscovery of the species of 'ancestral Volvox': morphology and phylogenetic position of Pleodorina sphaerica (Volvocales, Chlorophyceae) from Thailand.

PubMed

Nozaki, Hisayoshi; Mahakham, Wuttipong; Athibai, Sujeephon; Yamamoto, Kayoko; Takusagawa, Mari; Misumi, Osami; Herron, Matthew D; Rosenzweig, Frank; Kawachi, Masanobu

2017-01-01

Pleodorina sphaerica Iyengar was considered to be a phylogenetic link between Volvox and the type species Pleodorina californica Shaw because it has small somatic cells distributed from the anterior to posterior poles in 64- or 128-celled vegetative colonies. However, cultural studies and molecular and ultrastructural data are lacking in P. sphaerica , and this species has not been recorded since 1951. Here, we performed light and electron microscopy and molecular phylogeny of P. sphaerica based on newly established culture strains originating from Thailand. Morphological features of the present Thai species agreed well with those of the previous studies of the Indian material of P. sphaerica and with those of the current concept of the advanced members of the Volvocaceae. The present P. sphaerica strains exhibited homothallic sexuality; male and facultative female colonies developed within a single clonal culture. Chloroplast multigene phylogeny demonstrated that P. sphaerica was sister to two other species of Pleodorina ( P. californica and Pleodorina japonica Nozaki) without posterior somatic cells, and these three species of Pleodorina formed a robust clade, which was positioned distally in the large monophyletic group including nine taxa of Volvox sect. Merrillosphaera and Volvox (sect. Janetosphaera ) aureus Ehrenberg. Based on the present phylogenetic results, evolutionary losses of posterior somatic cells might have occurred in the ancestor of P. californica and P. japonica . Thus, P. sphaerica might represent an ancestral morphology of Pleodorina , rather than of Volvox .

VizieR Online Data Catalog: Nearby B-type stars abundances (Morel+, 2008)

NASA Astrophysics Data System (ADS)

Morel, T.; Butler, K.

2008-06-01

This Table gives the adopted loggf values, EW measurements (in mA) and line-by-line abundances (on the scale in which log[epsilon(H)]=12). A blank indicates that the EW was not reliably measurable, the line was considered blended for the relevant temperature range or yielded a discrepant abundance. The accuracy of the EW measurements is discussed in Sect.3 of the paper. The wing of HeI 4387.9 was taken as pseudo continuum in the case of NeII 4391.99. (2 data files).

Optical/Infrared Properties of Atmospheric Aerosols with an In-Situ, Multi-Wavelength, Multichannel Nephelometer System.

DTIC Science & Technology

1985-04-01

from any angle of approach. An angular impetus is imparted to the particle 25 7. motion via the eight evenly spaced entrance vanes. As the particles...measurement cycle. 2 f.. 27 VA NE S M= VANE ASSEMBLY BASE IN SECT SCREEN TUBE PROTECTIVE CPLUGHOUSING HOUSING-DEFLECTORAEOYMIINT SPACING PHAEO YNAI N...AERODYNAMIC FLOW DEFLECTOR OUTER TUJBE TAPERED p. Figure 3 r Wedding PM 1 0 Inlet [I]J 28 . .I .. II | I I J . 1 _1 ! I 7 I ! . ?. . . - 120 -- WEDDING INLET

Proposed Barge Terminal Expansion, Packer River Terminal, Inc., South St. Paul, Dakota County, Minnesota.

DTIC Science & Technology

1977-09-01

On 24 June 1974 Packer applied to the St. Paul District, Corps of Engineers (Corps) for a DOA permit under Section 10 of the River and Harbor Act of...exercised jurisdiction under Section 404 of P.L. 92-500 to the ordinary high water mark of the • Mississippi River, Thu’, even though the proposed project...Corps of Engineers was to expand their regulatory IT ril ct ion under Sect ion 404 of P.l.. 92-500 ,nd to promulgate new r- ’~giiI.,t .; ill conjunct

Antenna Impedance Measures in a Magnetized Plasma. Part 1. Spherical Antenna

DTIC Science & Technology

2006-10-16

3436 (1964) [2] Crawford FW, J. Appl. Phys 36 (10) 3142, (1965) [3] Dote T , Ichimiya T , Journal of Applied Physics 36 (6): 1866 (1965) [4] Oya H...Obayashi T , Report of Ionosphere and Space Research in Japan 20 (2): 199 (1966) [5] Balmain, K. IEEE Transactions on Antennas and Propagation vol.AP-14...no.3 : 402 (1966) [6] Uramoto J Physics Of Fluids 13 (3): 657 (1970) 5 [7] T . H. Y. Yeung and J. Sayers, Proc. Phys. Soc. London, Sect. B 70, 663

A Marriage of Convenience: Arab Capital and Western Expertise, The Recent Growth of Arab Airlines,

DTIC Science & Technology

1978-01-01

to award crig I nec t ’ l u g di ’ g i O O S Soc Sect ion I I 1 1 t w i t I p a r t l v meet t h e nude t l y t u g need I or ma jot mat ~t t...According to one report , f i f teen defe cts , three of wh ich were considered major and dangerous , were found during a technical inquiry ; 1 Soviet

U.S. Air Force Aircraft in Southeast Asia Tested by the Air Force Flight Test Center

DTIC Science & Technology

1970-03-01

rivalries of religious sects and powerful political factions. The United States, France, Great Britian, Thailand, Pakistan, New Zealand , Australia, and...Background A-lb Sky raider 0-1 Bird Dog 0-2 WU-2 U-3 F-U Phantom II and RF-fc F-5 Freedom Fignter A-7 Corsair II C-7 Caribou OV-10 Bronco...Aug 69 A new world speed record for piston engine airplanes was established by civilian pilot Darryl Greenamyer over a three-kilometer course laid

On exponential stability of linear Levin-Nohel integro-differential equations

NASA Astrophysics Data System (ADS)

Tien Dung, Nguyen

2015-02-01

The aim of this paper is to investigate the exponential stability for linear Levin-Nohel integro-differential equations with time-varying delays. To the best of our knowledge, the exponential stability for such equations has not yet been discussed. In addition, since we do not require that the kernel and delay are continuous, our results improve those obtained in Becker and Burton [Proc. R. Soc. Edinburgh, Sect. A: Math. 136, 245-275 (2006)]; Dung [J. Math. Phys. 54, 082705 (2013)]; and Jin and Luo [Comput. Math. Appl. 57(7), 1080-1088 (2009)].

[Influences of Confucianism, Taoism and Buddhism on Chinese Medical Formulas in Jin-Tang Dynasties].

PubMed

Wu, Xiao-xiang

2006-04-01

In the Jin-Tang Dynasties, when Confucianism, Taoism and Buddhism contended, conflicted and well blent, forming a state of mingled thoughts of the three sects. It exerted profound influences on Chinese Medical Formulas and promoted the academic fashion of compiling books about medical formulas characterized by collecting various formulas especially the simple and proved recipes. This plays a role in the formation of the formulas used in the Jin-Tang Dynasties, featuring simplicity, convenience, cheapness, and effectiveness, different from those of other periods.

The Mechanosensitive Ca2+ Channel as a Central Regular of Prostate Tumor Cell Migration and Invasiveness

DTIC Science & Technology

2009-01-01

sibly explain why the absence of dystrophin in Duchenne muscular dystrophic muscle results in TRPC1 channels being abnormally gated open (see Sect...135 7/30/2007 6:35:10 PM 136 O.P. Hamill, R. Maroto 7.6.1.4 TRPC1 in Muscular Dystrophy Both TRPC1 and MscCa are expressed in skeletal muscle and...both have been implicated in the muscular degeneration that occurs in Duchenne muscular dystro- phy (DMD). In particular, muscle fibers from the mdx

Strategic Resources of Iraq, Turkey and Iran and the Development of Kurdish Nationalism: The Domestic, Regional and International Context

DTIC Science & Technology

1989-12-01

well as regional and international relations in these three nations have been complicated by the Kurdish issue in varying degrees. In each country , the... Country : The Kurds and Kurdistan (London: Zed Press, 1980), p. 115. 5 Kurds "who are Ali-Ilahi, a sect even farther from the Sunni creed than the Shia...as to the boundaries of the country that Kurdish nationalists seek to establish. Due to population shifts over the years, Kurds have settled in

3-Substituted Indole Inhibitors Against Francisella tularensis FabI Identified by Structure-Based Virtual Screening

DTIC Science & Technology

2013-07-01

FabI, but share low sequence identity and are poorly inhibited by triclosan.25,26 S. pneumoniae and P. aeruginosa contain FabK,24 and Vibrio cholerae,27...with 0.2 mM IPTG. The cells were harvested after an overnight induction period at 17 °C. The cells were lysed and sonicated and loaded onto a nickel...of enoyl- (acyl-carrier protein) reductase, FabV, from Vibrio fischeri. Acta Crystallogr., Sect. F: Struct. Biol. Cryst. Commun. 2012, 68, 78−80. (27

Clinical applications and implications of common and founder mutations in Indian subpopulations.

PubMed

Ankala, Arunkanth; Tamhankar, Parag M; Valencia, C Alexander; Rayam, Krishna K; Kumar, Manisha M; Hegde, Madhuri R

2015-01-01

South Asian Indians represent a sixth of the world's population and are a racially, geographically, and genetically diverse people. Their unique anthropological structure, prevailing caste system, and ancient religious practices have all impacted the genetic composition of most of the current-day Indian population. With the evolving socio-religious and economic activities of the subsects and castes, endogamous and consanguineous marriages became a commonplace. Consequently, the frequency of founder mutations and the burden of heritable genetic disorders rose significantly. Specifically, the incidence of certain autosomal-recessive disorders is relatively high in select Indian subpopulations and communities that share common recent ancestry. Although today clinical genetics and molecular diagnostic services are making inroads in India, the high costs associated with the technology and the tests often keep patients from an exact molecular diagnosis, making more customized and tailored tests, such as those interrogating the most common and founder mutations or those that cater to select sects within the population, highly attractive. These tests offer a quick first-hand affordable diagnostic and carrier screening tool. Here, we provide a comprehensive catalog of known common mutations and founder mutations in the Indian population and discuss them from a molecular, clinical, and historical perspective. © 2014 WILEY PERIODICALS, INC.

Notes on "Quantum Gravity" and Noncommutative Geometry

NASA Astrophysics Data System (ADS)

Gracia-Bondía, J. M.

I hesitated for a long time before giving shape to these notes, originally intended for preliminary reading by the attendees to the Summer School "New paths towards quantum gravity" (Holbaek Bay, Denmark, May 2008). At the end, I decide against just selling my mathematical wares, and for a survey, necessarily very selective, but taking a global phenomenological approach to its subject matter. After all, noncommutative geometry does not purport yet to solve the riddle of quantum gravity; it is more of an insurance policy against the probable failure of the other approaches. The plan is as follows: the introduction invites students to the fruitful doubts and conundrums besetting the application of even classical gravity. Next, the first experiments detecting quantum gravitational states inoculate us a healthy dose of scepticism on some of the current ideologies. In Sect. 1.3 we look at the action for general relativity as a consequence of gauge theory for quantum tensor fields. Section 1.4 briefly deals with the unimodular variants. Section 1.5 arrives at noncommutative geometry. I am convinced that, if this is to play a role in quantum gravity, commutative and noncommutative manifolds must be treated on the same footing, which justifies the place granted to the reconstruction theorem. Together with Sect. 1.3, this part constitutes the main body of the notes. Only very summarily at the end of this section do we point to some approaches to gravity within the noncommutative realm. The last section delivers a last dose of scepticism. My efforts will have been rewarded if someone from the young generation learns to mistrust current mindsets.

Molecular evidence that the asexual industrial fungus Trichoderma reesei is a clonal derivative of the ascomycete Hypocrea jecorina.

PubMed Central

Kuhls, K; Lieckfeldt, E; Samuels, G J; Kovacs, W; Meyer, W; Petrini, O; Gams, W; Börner, T; Kubicek, C P

1996-01-01

The relationship of the important cellulase producing asexual fungus Trichoderma reesei to its putative teleomorphic (sexual) ancestor Hypocrea jecorina and other species of the Trichoderma sect. Longibrachiatum was studied by PCR-fingerprinting and sequence analyses of the nuclear ribosomal DNA region containing the internal transcribed spacers (ITS-1 and ITS-2) and the 5.8S rRNA gene. The differences in the corresponding ITS sequences allowed a grouping of anamorphic (asexual) species of Trichoderma sect. Longibrachiatum into Trichoderma longibrachiatum, Trichoderma pseudokoningii, and Trichoderma reesei. The sexual species Hypocrea schweinitzii and H. jecorina were also clearly separated from each other. H. jecorina and T. reesei exhibited identical sequences, suggesting close relatedness or even species identity. Intraspecific and interspecific variation in the PCR-fingerprinting patterns supported the differentiation of species based on ITS sequences, the grouping of the strains, and the assignment of these strains to individual species. The variations between T. reesei and H. jecorina were at the same order of magnitude as found between all strains of H. jecorina, but much lower than the observed interspecific variations. Identical ITS sequences and the high similarity of PCR-fingerprinting patterns indicate a very close relationship between T. reesei and H. jecorina, whereas differences of the ITS sequences and the PCR-fingerprinting patterns show a clear phylogenetic distance between T. reesei/H. jecorina and T. longibrachiatum. T. reesei is considered to be an asexual, clonal line derived from a population of the tropical ascomycete H. jecorina. Images Fig. 2 PMID:8755548

Synthesis of Novel Basic Skeletons Derived from Naltrexone

NASA Astrophysics Data System (ADS)

Nagase, Hiroshi; Fujii, Hideaki

We will describe eight interesting reactions using naltrexone derivatives. Almost all these reactions are characteristic of naltrexone derivatives, and can lead to the synthesis of many novel skeletons that provide new interesting pharmacological data. Some of the new reactions that were found with naltrexone derivatives were expanded into general reactions. For example, the reaction of 6α-hydroxyaldehyde derived from naltrexone led to the oxazoline dimer and the 1,3,5-trioxazatriquinane skeleton (triplet drug); this reaction was applied to general ketones which were converted to α-hydroxyaldehydes, followed by conversion to dimers and trimers, as described in Sect. 7.

An Introductory Characterization of a Combat-Casualty-Care Relevant Swine Model of Closed Head Injury Resulting from Exposure to Explosive Blast

DTIC Science & Technology

2009-07-08

into the crew compartment, the steel top of the frame was bolted to the top of the surrogate and the sling was anchored to the bottom steel plate of...subcutaneously from near the right scapula to the skull surface, where the ends of these leads were attached to the screws, the ends of which rested on...dis- sected near the right scapula , and the positive lead for channel 3 was advanced within this pocket under the skin around the left rib cage to a

Practical Session: Logistic Regression

NASA Astrophysics Data System (ADS)

Clausel, M.; Grégoire, G.

2014-12-01

An exercise is proposed to illustrate the logistic regression. One investigates the different risk factors in the apparition of coronary heart disease. It has been proposed in Chapter 5 of the book of D.G. Kleinbaum and M. Klein, "Logistic Regression", Statistics for Biology and Health, Springer Science Business Media, LLC (2010) and also by D. Chessel and A.B. Dufour in Lyon 1 (see Sect. 6 of http://pbil.univ-lyon1.fr/R/pdf/tdr341.pdf). This example is based on data given in the file evans.txt coming from http://www.sph.emory.edu/dkleinb/logreg3.htm#data.

The Relationship Between Constraint and Ductile Fracture Initiation as Defined by Micromechanical Analyses

NASA Technical Reports Server (NTRS)

Panontin, Tina L.; Sheppard, Sheri D.

1994-01-01

The use of small laboratory specimens to predict the integrity of large, complex structures relies on the validity of single parameter fracture mechanics. Unfortunately, the constraint loss associated with large scale yielding, whether in a laboratory specimen because of its small size or in a structure because it contains shallow flaws loaded in tension, can cause the breakdown of classical fracture mechanics and the loss of transferability of critical, global fracture parameters. Although the issue of constraint loss can be eliminated by testing actual structural configurations, such an approach can be prohibitively costly. Hence, a methodology that can correct global fracture parameters for constraint effects is desirable. This research uses micromechanical analyses to define the relationship between global, ductile fracture initiation parameters and constraint in two specimen geometries (SECT and SECB with varying a/w ratios) and one structural geometry (circumferentially cracked pipe). Two local fracture criteria corresponding to ductile fracture micromechanisms are evaluated: a constraint-modified, critical strain criterion for void coalescence proposed by Hancock and Cowling and a critical void ratio criterion for void growth based on the Rice and Tracey model. Crack initiation is assumed to occur when the critical value in each case is reached over some critical length. The primary material of interest is A516-70, a high-hardening pressure vessel steel sensitive to constraint; however, a low-hardening structural steel that is less sensitive to constraint is also being studied. Critical values of local fracture parameters are obtained by numerical analysis and experimental testing of circumferentially notched tensile specimens of varying constraint (e.g., notch radius). These parameters are then used in conjunction with large strain, large deformation, two- and three-dimensional finite element analyses of the geometries listed above to predict crack initiation loads and to calculate the associated (critical) global fracture parameters. The loads are verified experimentally, and microscopy is used to measure pre-crack length, crack tip opening displacement (CTOD), and the amount of stable crack growth. Results for A516-70 steel indicate that the constraint-modified, critical strain criterion with a critical length approximately equal to the grain size (0.0025 inch) provides accurate predictions of crack initiation. The critical void growth criterion is shown to considerably underpredict crack initiation loads with the same critical length. The relationship between the critical value of the J-integral for ductile crack initiation and crack depth for SECT and SECB specimens has been determined using the constraint-modified, critical strain criterion, demonstrating that this micromechanical model can be used to correct in-plane constraint effects due to crack depth and bending vs. tension loading. Finally, the relationship developed for the SECT specimens is used to predict the behavior of circumferentially cracked pipe specimens.

[Evaluation of external quality assurance in accordance with sect. 137 SGB V at the Carl Gustav Carus university hospital in Dresden].

PubMed

Petzold, Thomas; Steinwitz, Adrienne; Schmitt, Jochen; Eberlein-Gonska, Maria

2013-01-01

Obligatory external quality assurance is an established method used to ensure the quality of inpatient care in Germany. The comprehensive approach is unique in international comparison. In addition to the statutory requirement, the health insurance funds require this form of external quality control in order to foster quality-based competition between hospitals. Ever since its introduction, healthcare providers have scrutinised the effects of the mandatory use of this survey. The study was based on all patients in the University Hospital Dresden, for whom a quality assurance sheet (n = 45,639) had to be recorded between 2003 and 2011. The documentation of these sheets was carried out by specially trained personnel. For each performance area, the duration of the documentation quality sheets was assessed, and a descriptive analysis of all quality assurance sheets was conducted. In the presence of statistical significance the so-called "Structured Dialogues" were analysed. Over the whole period, 167 statistically noticeable problems occurred. Nine of these have been rated as noticeable problems in medical quality by the specialised working groups of the project office quality assurance (PGSQS) at the Saxon State Medical Association (SLÄK). The remaining 158 statistical anomalies included 25 documentation errors; 96 were classified as statistically significant, and only 37 were marked to indicate that re-observation by the PGSQS was required. The total effort estimate for the documentation of quality assurance sheets was approximately 1,420 working days in the observation period. As far as the quality of patient care is concerned, the results can be considered positive because only a small number of quality indicators indicate noticeable qualitative problems. This statement is based primarily on the comparison of the groups of Saxony and Germany, which are included in the quality report of external quality assurance in accordance with sect. 137 SGB V. The majority of noticeable statistical problems were due to documentation errors. Other noticeable statistical problems that are medically indicated, but without effect on the extramural care to patients, recurrently occur with the respective quality indicators. Examples include the postoperative mobility indicators of the implementation of endoprostheses which cannot be used to draw conclusions about patient outcomes. Information on the quality of life as well as the post-hospital course of disease would be important in this context, but is still lacking. The use of external quality assurance data in accordance with sect. 137 SGB V for evaluation research has so far been handled quite restrictively. Thus, in-depth analyses on the quality of treatment cannot be derived. Copyright © 2013. Published by Elsevier GmbH.

VizieR Online Data Catalog: Spectra of 13 lensed quasars (Sluse+, 2012)

NASA Astrophysics Data System (ADS)

Sluse, D.; Hutsemekers, D.; Courbin, F.; Meylan, G.; Wambsganss, J.

2012-05-01

Extracted flux calibrated spectra of 13 lensed quasars following the methodology described in Sect. 2.1. of the oaoer. The data were obtained with the FORS spectrograph at VLT in multi-object spectroscopy mode. The typical wavelength coverage is from 4200 to 8200Å. The data concern the following objects: HE0047-1756 (HE0047), Q0142-100 (Q0142), SDSSJ0246-0825 (SDSS0246), HE0435-1223 (HE0435), SDSSJ0806+2006 (SDSS0806), FBQ0951+2635 (FBQ0951), BRI0952-0115 (BRI0952), SDSSJ1138+0314 (J1138), J1226-0006 (J1226), SDSSJ1335+0118 (J1335), Q1355-2257 (Q1355), WFI2033-4723 (WFI2033), and HE2149-2745 (HE2149). For each object, we provide the 1D flux calibrated spectrum of the 2 individual images in the slit. In addition, we also provide the 2D reduced spectrum and corresponding 1σ error frame (corresponding files are named "objectnamedata" and "objectnameerr"), and the 2D processed spectra associated to the deconvolution, as shown in Fig.1 of the paper. These processed 2D spectra are the deconvolved frame ("dec"), the extended component of the flux emission ("ext") and the residual frame in σ units ("_res") corresponding to panel (b), (c) and (d) of Fig.1. A pdf file file similar to Fig.1 is also provided for each object. (4 data files).

Conidial germination patterns in powdery mildews.

PubMed

Cook, R T A; Braun, U

2009-05-01

Four conidial germination types namely, polygoni (syn. Pseudoidium), cichoracearum (syn. Reticuloidium), pannosa (syn. Fibroidium) and fuliginea (syn. Magnicellulatae) are commonly used as an aid in the identification of the Oidium anamorphs of powdery mildews. However, results of germination tests and a survey of the literature showed that these types did not adequately distinguish all taxa and did not reflect the range of species covered. Hence two new main types, Striatoidium and Blumeria, are proposed for the newly created genus Neoerysiphe and for the unique pattern of B. graminis. Two new names, orthotubus and brevitubus subtypes of Fibroidium, are proposed for the pannosa and fuliginea types respectively. Also proposed is a special longitubus pattern for the long, undifferentiated, negatively hydrotropic germ tubes prevalent in Erysiphe trifolii and species in Golovinomyces sect. Depressi. The recognition of the Striatoidium type of N. galeopsidis as distinct from the Pseudoidium type of E. elevata facilitated the detection of a simultaneous infection of Catalpa by these two powdery mildews. A key is provided for the identification of Oidium genera based on germination types. A review of germination patterns in the tribe Phyllactinieae found no consistent differences amongst the genera. Golovinomyces sect. Depressi is re-described to accommodate Golovinomyces spp. often having a longitubus pattern of germination. It includes G. cichoracearum var. latisporus, now considered a separate species based on its germination type, other anamorphic morphology and previous molecular sequence analyses. A new combination, Golovinomyces ambrosiae, is proposed for this species. Other anomalies within G. cichoracearum s. lat. were addressed by proposing another new combination, G. fischeri for the former G. cichoracearum var. fischeri that differs from G. cichoracearum s. str. in having larger chasmothecia and a well distinguished anamorph, and by proposing a new species, G. sonchicola, that is biologically, phylogenetically and morphologically distinct from G. cichoracearum s. str.

A Human Deciduous Tooth and New 40Ar/39Ar Dating Results from the Middle Pleistocene Archaeological Site of Isernia La Pineta, Southern Italy

PubMed Central

Peretto, Carlo; Arnaud, Julie; Moggi-Cecchi, Jacopo; Manzi, Giorgio; Nomade, Sébastien; Pereira, Alison; Falguères, Christophe; Bahain, Jean-Jacques; Grimaud-Hervé, Dominique; Berto, Claudio; Sala, Benedetto; Lembo, Giuseppe; Muttillo, Brunella; Gallotti, Rosalia; Thun Hohenstein, Ursula; Vaccaro, Carmela; Coltorti, Mauro; Arzarello, Marta

2015-01-01

Isernia La Pineta (south-central Italy, Molise) is one of the most important archaeological localities of the Middle Pleistocene in Western Europe. It is an extensive open-air site with abundant lithic industry and faunal remains distributed across four stratified archaeosurfaces that have been found in two sectors of the excavation (3c, 3a, 3s10 in sect. I; 3a in sect. II). The prehistoric attendance was close to a wet environment, with a series of small waterfalls and lakes associated to calcareous tufa deposits. An isolated human deciduous incisor (labelled IS42) was discovered in 2014 within the archaeological level 3 coll (overlying layer 3a) that, according to new 40Ar/39Ar measurements, is dated to about 583–561 ka, i.e. to the end of marine isotope stage (MIS) 15. Thus, the tooth is currently the oldest human fossil specimen in Italy; it is an important addition to the scanty European fossil record of the Middle Pleistocene, being associated with a lithic assemblage of local raw materials (flint and limestone) characterized by the absence of handaxes and reduction strategies primarily aimed at the production of small/medium-sized flakes. The faunal assemblage is dominated by ungulates often bearing cut marks. Combining chronology with the archaeological evidence, Isernia La Pineta exhibits a delay in the appearance of handaxes with respect to other European Palaeolithic sites of the Middle Pleistocene. Interestingly, this observation matches the persistence of archaic morphological features shown by the human calvarium from the Middle Pleistocene site of Ceprano, not far from Isernia (south-central Italy, Latium). In this perspective, our analysis is aimed to evaluate morphological features occurring in IS42. PMID:26457581

New phylogenetic insights toward developing a natural generic classification of African angraecoid orchids (Vandeae, Orchidaceae).

PubMed

Simo-Droissart, Murielle; Plunkett, Gregory M; Droissart, Vincent; Edwards, Molly B; Farminhão, João N M; Ječmenica, Vladimir; D'haijère, Tania; Lowry, Porter P; Sonké, Bonaventure; Micheneau, Claire; Carlsward, Barbara S; Azandi, Laura; Verlynde, Simon; Hardy, Olivier J; Martos, Florent; Bytebier, Benny; Fischer, Eberhard; Stévart, Tariq

2018-09-01

Despite significant progress made in recent years toward developing an infrafamilial classification of Orchidaceae, our understanding of relationships among and within tribal and subtribal groups of epidendroid orchids remains incomplete. To reassess generic delimitation among one group of these epidendroids, the African angraecoids, phylogenetic relationships were inferred from DNA sequence data from three regions, ITS, matK, and the trnL-trnF intergenic spacer, obtained from a broadly representative sample of taxa. Parsimony and Bayesian analyses yielded highly resolved trees that are in clear agreement and show significant support for many key clades within subtribe Angraecinae s.l. Angraecoid orchids comprise two well-supported clades: an African/American group and an Indian Ocean group. Molecular results also support many previously proposed relationships among genera, but also reveal some unexpected relationships. The genera Aerangis, Ancistrorhynchus, Bolusiella, Campylocentrum, Cyrtorchis, Dendrophylax, Eurychone, Microcoelia, Nephrangis, Podangis and Solenangis are all shown to be monophyletic, but Angraecopsis, Diaphananthe and Margelliantha are polyphyletic. Diaphananthe forms three well-supported clades, one of which might represent a new genus, and Rhipidoglossum is paraphyletic with respect to Cribbia and Rhaesteria, and also includes taxa currently assigned to Margelliantha. Tridactyle too is paraphyletic as Eggelingia is embedded within it. The large genus Angraecum is confirmed to be polyphyletic and several groups will have to be recognized as separate genera, including sections Dolabrifolia and Hadrangis. The recently segregated genus Pectinariella (previously recognized as A. sect. Pectinaria) is polyphyletic and its Continental African species will have to be removed. Similarly, some of the species recently transferred to Angraecoides that were previously placed in Angraecum sects. Afrangraecum and Conchoglossum will have to be moved and described as a new genus. Copyright © 2018 Elsevier Inc. All rights reserved.

An assessment of the risk of element contamination of urban and industrial areas using Taraxacum sect. Ruderalia as a bioindicator.

PubMed

Fröhlichová, Alena; Száková, Jiřina; Najmanová, Jana; Tlustoš, Pavel

2018-02-19

Central Bohemia (Czech Republic) has highly developed industry and a dense rail network. Here, we aimed to determine the content of risk elements in dandelion plants (Taraxacum sect. Ruderalia) growing near train stations, industrial enterprises, and in the city parks of 16 cities in the Central Bohemian region. The highest element contents in the soils were found in industrial areas affected by the historical mining and smelting activities; contemporary industry showed no substantial effect on the soil element contents. The median values of element contents (As, Be, Cd, Co, Cr, Cu, Ni, Pb, and Zn) at the railway station sites were the highest among the monitored sites, where the differences between park and station sites were significant for Be, Co, and Zn. Although the intensity of the traffic at the individual stations differed, we found that long-term regular traffic enhanced the element contents in the soils and, subsequently, in the plants. For Cd, Co, Cr, Cu, Pb, V, and Zn, the highest median element contents were found in plant roots, regardless of the sampling site. For Cd and Zn, the contents in leaves were higher than in the inflorescences, and the opposite pattern was recorded for Co and Cu. As and Be were distributed equally among the plant parts. Among the sampling sites, the As, Be, Cd, Zn, and Pb contents in the plant roots tended to have higher median values at the station sites, confirming the results of our soil analyses. We detected a fairly good correlation between soil and plant content for cadmium, regardless of the sampling site, soil element content, or analyzed part of the plant. Thus, we propose that dandelion is a suitable bioindicator of cadmium pollution of soil.

Structures Technology for Future Aerospace Systems

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Venneri, Samuel L.; Paul, Donald B.; Hopkins, Mark A.

2000-01-01

An overview of structures technology for future aerospace systems is given. Discussion focuses on developments in component technologies that will improve the vehicle performance, advance the technology exploitation process, and reduce system life-cycle costs. The component technologies described are smart materials and structures, multifunctional materials and structures, affordable composite structures, extreme environment structures, flexible load bearing structures, and computational methods and simulation-based design. The trends in each of the component technologies are discussed and the applicability of these technologies to future aerospace vehicles is described.

Internal Medicine in World War 2. Volume 1. Activities of Medical Consultants

DTIC Science & Technology

1961-01-01

8217 Administration, Washington, D.C. (on leave of absence from University of Wisconsin Medical School, Madison , Wis.). Formerly Colonel, MC, AUS. HUGmH J MORGAN...4i 0) 400: .W 42 uW C- 1 .., imEI)rEIIIANEAN THEATER IS7 lKwoile clear t hat tilie M\\ edical Sect ion, AFI’IQ. b~ecauise or its p)osit ion lit tlie( th... UW AIIzIt C. i’’vh jiary ill :i rmiti), I Wiw),). New NYoTk: The NInacM~illan Co.. 194. p. ~ 5 EUROPEAN THEATER OF OP1ERATIONS, 36:3 linust ion

Unsteady Transonic Pressure Measurements on a Semi-Span Wind Tunnel Model of a Transport-Type Supercritical Wing (LANN) Lockheed-Georgia, Air Force, NASA, and NLR Model. Part 2. Pressure Distributions (PLOTTED) and Plots of the Vibration Modes.

DTIC Science & Technology

1983-03-01

SECTION 3 : SECTION 4 SCIN SECTION 1 .2 .. . . . .. . . . . .. . .. . .. . .. . 12 a Cp’..... . 4~ . . ... ... .. ~F ~ -12 J Cy/C 13 -2 SECTION I...Upper real 0 Apha - .584 Degr. - Upper imag Daipha = .502 Degr. Harm - I-AN Cp’ 4. -4- 12 .... .. .. 4 . 12 L r -SECTION; 3 : SCIN ETINSSETO CP’ 4 -4...x /c -/ x c .:. .: - : . .:. .: , , *’*c:. . . . . . ..:. : L. . . .. . 9 94 -2 SELO .. -SECT .ON .2 bat* IS1-12-19S1 Tubes... : SCIN I &Upper stat

Self-Inflicted Wounds: Debates and Divisions within al-Qa’ida and its Periphery

DTIC Science & Technology

2010-12-16

Genetics : The Afghan Origins  Al‐Qa’ida’s current efforts to unify disparate Islamist groups and struggles into a global  conflict against the so‐called...upon.    The Tawhed.ws site has a special page dedicated to the Shi’a under the  rubric  of “sects  and  schools,”  a  section  that  is modeled  on

New stability conditions for mixed linear Levin-Nohel integro-differential equations

NASA Astrophysics Data System (ADS)

Dung, Nguyen Tien

2013-08-01

For the mixed Levin-Nohel integro-differential equation, we obtain new necessary and sufficient conditions of asymptotic stability. These results improve those obtained by Becker and Burton ["Stability, fixed points and inverse of delays," Proc. - R. Soc. Edinburgh, Sect. A 136, 245-275 (2006)], 10.1017/S0308210500004546 and Jin and Luo ["Stability of an integro-differential equation," Comput. Math. Appl. 57(7), 1080-1088 (2009)], 10.1016/j.camwa.2009.01.006 when b(t) = 0 and supplement the 3/2-stability theorem when a(t, s) = 0. In addition, the case of the equations with several delays is discussed as well.

Practical Session: Multiple Linear Regression

NASA Astrophysics Data System (ADS)

Clausel, M.; Grégoire, G.

2014-12-01

Three exercises are proposed to illustrate the simple linear regression. In the first one investigates the influence of several factors on atmospheric pollution. It has been proposed by D. Chessel and A.B. Dufour in Lyon 1 (see Sect. 6 of http://pbil.univ-lyon1.fr/R/pdf/tdr33.pdf) and is based on data coming from 20 cities of U.S. Exercise 2 is an introduction to model selection whereas Exercise 3 provides a first example of analysis of variance. Exercises 2 and 3 have been proposed by A. Dalalyan at ENPC (see Exercises 2 and 3 of http://certis.enpc.fr/~dalalyan/Download/TP_ENPC_5.pdf).

VizieR Online Data Catalog: SAMI Galaxy Survey: gas streaming (Cecil+, 2016)

NASA Astrophysics Data System (ADS)

Cecil, G.; Fogarty, L. M. R.; Richards, S.; Bland-Hawthorn, J.; Lange, R.; Moffett, A.; Catinella, B.; Cortese, L.; Ho, I.-T.; Taylor, E. N.; Bryant, J. J.; Allen, J. T.; Sweet, S. M.; Croom, S. M.; Driver, S. P.; Goodwin, M.; Kelvin, L.; Green, A. W.; Konstantopoulos, I. S.; Owers, M. S.; Lawrence, J. S.; Lorente, N. P. F.

2016-08-01

From the first ~830 targets observed in the SGS, we selected 344 rotationally supported galaxies having enough gas to map their CSC. We rejected 8 whose inclination angle to us is too small (i<20°) to be established reliably by photometry, and those very strongly barred or in obvious interactions. Finally, we rejected those whose CSC would be smeared excessively by our PSF (Sect. 2.3.1) because of large inclination (i>71°), compact size, or observed in atrocious conditions, leaving 163 SGS GAMA survey sub-sample and 15 "cluster" sub-sample galaxies with discs. (3 data files).

VizieR Online Data Catalog: DIBs in APOGEE telluric standard star spectra (Elyajouri+, 2017)

NASA Astrophysics Data System (ADS)

Elyajouri, M.; Lallement, R.; Monreal-Ibero, A.; Capitanio, L.; Cox, N. L. J.

2017-04-01

A subset of ~60 target stars from the APOGEE TSS list described in Sect. 3 has been observed in the visible with NARVAL, the spectropolarimeter of the Bernard Lyot telescope (2m) at Pic du Midi observatory, used in high-resolution spectroscopic mode (R~=80000). For all data the signal-to-noise ratio (S/N) is between 50 and 100. Two targets were observed twice in order check the estimated uncertainties. An additional subset of five targets was observed with the SOPHIE spectrograph at the 1.93m telescope of the Haute-Provence Observatory at a resolving power R~=39000. (1 data file).

Optoelectronics components and technology for optical networking in China: recent progress and future trends

NASA Astrophysics Data System (ADS)

Jiang, Shan; Liu, Shuihua

2004-04-01

Current optical communication systems are more and more relying on the advanced opto-electronic components. A series of revolutionary optical and optoelectronics components technology accounts for the fast progress and field deployment of high-capacity telecommunication and data-transmission systems. Since 1990s, the optical communication industry in China entered a high-speed development period and its wide deployment had already established the solid base for China information infrastructure. In this presentation, the main progress of optoelectronics components and technology in China are reviewed, which includes semiconductor laser diode/photo receiver, fiber optical amplifier, DWDM multiplexer/de-multiplexer, dispersion compensation components and all optical network node components, such as optical switch, OADM, tunable optical filters and variable optical attenuators, etc. Integration discrete components into monolithic/hybrid platform component is an inevitable choice for the consideration of performance, mass production and cost reduction. The current status and the future trends of OEIC and PIC components technology in China will also be discuss mainly on the monolithic integration DFB LD + EA modulator, and planar light-wave circuit (PLC) technology, etc.

Vehicle/Guideway Interaction in Maglev Systems

DTIC Science & Technology

1992-03-01

Technology Division Materials and Components in Maglev Systems Technology Division Materials and Components Technology Division byY. Cai, S. S. Chen, and D. M...Transportation Systems Reports (UC-330, Vehicle/Guideway Interaction in Maglev Systems by Y. Cai and S. S. Chen Materials and Components Technology Division D. M...Surface Irregularities ...................................... 32 4 Vehicle/Guideway Interaction in Transrapid Maglev System .................. 34 4.1

Component technology for stirling power converters

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.

1991-01-01

NASA Lewis Research Center has organized a component technology program as part of the efforts to develop Stirling converter technology for space power applications. The Stirling Space Power Program is part of the NASA High Capacity Power Project of the Civil Space Technology Initiative (CSTI). NASA Lewis is also providing technical management for the DOE/Sandia program to develop Stirling converters for solar terrestrial power producing electricity for the utility grid. The primary contractors for the space power and solar terrestrial programs develop component technologies directly related to their goals. This Lewis component technology effort, while coordinated with the main programs, aims at longer term issues, advanced technologies, and independent assessments. An overview of work on linear alternators, engine/alternator/load interactions and controls, heat exchangers, materials, life and reliability, and bearings is presented.

Optoelectronic Technology Consortium: Precompetitive Consortium for Optoelectronic Interconnect Technology

DTIC Science & Technology

1992-09-01

demonstrating the producibility of optoelectronic components for high-density/high-data-rate processors and accelerating the insertion of this technology...technology development stage, OETC will advance the development of optical components, produce links for a multiboard processor testbed demonstration, and...components that are affordable, initially at <$100 per line, and reliable, with a li~e BER᝺-15 and MTTF >10 6 hours. Under the OETC program, Honeywell will

Influences of history, geography, and religion on genetic structure: the Maronites in Lebanon

PubMed Central

Haber, Marc; Platt, Daniel E; Badro, Danielle A; Xue, Yali; El-Sibai, Mirvat; Bonab, Maziar Ashrafian; Youhanna, Sonia C; Saade, Stephanie; Soria-Hernanz, David F; Royyuru, Ajay; Wells, R Spencer; Tyler-Smith, Chris; Zalloua, Pierre A; Adhikarla, Syama; Adler, Christina J; Balanovska, Elena; Balanovsky, Oleg; Bertranpetit, Jaume; Clarke, Andrew C; Comas, David; Cooper, Alan; Der Sarkissian, Clio S I; Dulik, Matthew C; Erasmus, Christoff J; Gaieski, Jill B; GaneshPrasad, ArunKumar; Haak, Wolfgang; Hobbs, Angela; Javed, Asif; Jin, Li; Kaplan, Matthew E; Li, Shilin; Martínez-Cruz, Begoña; Matisoo-Smith, Elizabeth A; Melé, Marta; Merchant, Nirav C; Mitchell, R John; Owings, Amanda C; Parida, Laxmi; Pitchappan, Ramasamy; Quintana-Murci, Lluis; Renfrew, Colin; Lacerda, Daniela R; Santos, Fabrício R; Schurr, Theodore G; Soodyall, Himla; Swamikrishnan, Pandikumar; Valampuri John, Kavitha; Santhakumari, Arun Varatharajan; Vieira, Pedro Paulo; Ziegle, Janet S

2011-01-01

Cultural expansions, including of religions, frequently leave genetic traces of differentiation and in-migration. These expansions may be driven by complex doctrinal differentiation, together with major population migrations and gene flow. The aim of this study was to explore the genetic signature of the establishment of religious communities in a region where some of the most influential religions originated, using the Y chromosome as an informative male-lineage marker. A total of 3139 samples were analyzed, including 647 Lebanese and Iranian samples newly genotyped for 28 binary markers and 19 short tandem repeats on the non-recombinant segment of the Y chromosome. Genetic organization was identified by geography and religion across Lebanon in the context of surrounding populations important in the expansions of the major sects of Lebanon, including Italy, Turkey, the Balkans, Syria, and Iran by employing principal component analysis, multidimensional scaling, and AMOVA. Timing of population differentiations was estimated using BATWING, in comparison with dates of historical religious events to determine if these differentiations could be caused by religious conversion, or rather, whether religious conversion was facilitated within already differentiated populations. Our analysis shows that the great religions in Lebanon were adopted within already distinguishable communities. Once religious affiliations were established, subsequent genetic signatures of the older differentiations were reinforced. Post-establishment differentiations are most plausibly explained by migrations of peoples seeking refuge to avoid the turmoil of major historical events. PMID:21119711

VizieR Online Data Catalog: Barred & unbarred galaxies N, O abundance ratio (Florido+, 2015)

NASA Astrophysics Data System (ADS)

Florido, E.; Zurita, A.; Perez, I.; Perez-Montero, E.; Coelho, P. R. T.; Gadotti, D. A.

2015-11-01

The tables contain nebular emission line fluxes for the central region of 251 barred and 324 unbarred galaxies. The sample contains all spiral face-on galaxies (axial ratio b/a>=0.9) in the SDSS DR-2, with stellar masses larger than 1010 the solar mass, redshift 0.02

A subgeneric classification of the genus Vaccinium and the metamorphosis of V. section Bracteata Nakai: more terrestrial and less epiphytic in habit, more continental and less insular in distribution.

PubMed

Vander Kloet, S P; Dickinson, T A

2009-05-01

The taxonomic integrity of Vaccinium section Bracteata sensu Sleumer was assessed using a variety of numerical measures on a data matrix created from 46 OTUs scored for 65 descriptors. These analyses supported a much restricted ambit for section Bracteata and the concomitant resurrection of section Nesococcus and section Euepigynium, a more cosmopolitan interpretation for section Eococcus and section Pyxothamnus as well as a new taxon, Vaccinium section Baccula-nigra Kloet, sect. nov. to accommodate V. fragile Franch. and its conspecifics. A key to all the sections as well as a brief description for each section is also provided.

Beyond pluralism: psychoanalysis and the workings of mind.

PubMed

Pine, Fred

2011-10-01

Subjects that Freud excluded or incompletely explored have been sites of theoretical expansion in over a century of observation: the role of the other, the self, the preoedipal period, action, the countertransference, limits to neutrality/anonymity/abstinence, the loci of the analytic drama, effects beyond interpretation, agency, and basic needs (versus wishes). These developments have led to conflicting theories and sect-like groupings within the field. Group psychological processes underlying this are discussed; and a broad and inclusive view of psychoanalysis is proposed under the heading of the study of the workings of mind. Additionally, substantial integrative proposals are offered with respect to the central tasks of individual development, theories of mind, the relational turn, and aspects of technique.

Computer-Aided Design and Fabrication of Wire-Wrap (Trademark) Type Circuit Boards: A New Symbolism and Its Implementation (Conception et Fabrication Automatisees de Circuits par Cablage Enroule: un Nouveau Symbolisme et son Application),

DTIC Science & Technology

1982-02-01

facilitant la transition entre les plans d’ing~nierie 6lectronique et la matrice pertinente d’interconnexions requise pour le montage par c~blage enroul6 Wire...Wrap. Le d~veloppement de prototypes 6lectroniques s’est vu consid6rablement acc6l6r6 par la preparation plus rapide des donn~es d’interconnexions...directory, all located in *APL files (Sect. 7.0). A matrix called BANQUE is also formed by the program L to regroup those chip descriptions of the main

Dynamic Stability of Maglev Systems,

DTIC Science & Technology

1992-04-01

AD-A259 178 ANL-92/21 Materials and Components Dynamic Stability of Technology Division Materials and Components Maglev Systems Technology Division...of Maglev Systems Y. Cai, S. S. Chen, and T. M. Mulcahy Materials and Components Technology Division D. M. Rote Center for Transportation Research...of Maglev System with L-Shaped Guideway ......................................... 6 3 Stability of M aglev System s

The enabling technology for recovery of valued components from minerals in the upper and Mid Amur region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorokin, A.P.; Rimkevich, V.S.; Dem'yanova, L.P.

2009-05-15

Based on the physico-technical operations involved in the mineral processing technologies, the optimal production conditions are found for refractory fiber materials, aluminium, silicium, their compounds and other valued components. Ecologically safe and efficient aggregate technologies are developed for recovery of valued components from nonmetallic minerals and anthracides (brown coals).

Central Component Descriptors for Levels of Technological Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Niess, Margaret L.

2013-01-01

Technological pedagogical content knowledge (TPACK) proposes a theoretical framework that incorporates four central components: an overarching conception of what it means to teach with technology, knowledge of students' thinking and understandings of specific topics with technologies, knowledge of curricular materials that incorporate…

Efficient Computational Prototyping of Mixed Technology Microfluidic Components and Systems

DTIC Science & Technology

2002-08-01

AFRL-IF-RS-TR-2002-190 Final Technical Report August 2002 EFFICIENT COMPUTATIONAL PROTOTYPING OF MIXED TECHNOLOGY MICROFLUIDIC...SUBTITLE EFFICIENT COMPUTATIONAL PROTOTYPING OF MIXED TECHNOLOGY MICROFLUIDIC COMPONENTS AND SYSTEMS 6. AUTHOR(S) Narayan R. Aluru, Jacob White...Aided Design (CAD) tools for microfluidic components and systems were developed in this effort. Innovative numerical methods and algorithms for mixed

Prepreg and Melt Infiltration Technology Developed for Affordable, Robust Manufacturing of Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay; Petko, Jeannie F.

2004-01-01

Affordable fiber-reinforced ceramic matrix composites with multifunctional properties are critically needed for high-temperature aerospace and space transportation applications. These materials have various applications in advanced high-efficiency and high-performance engines, airframe and propulsion components for next-generation launch vehicles, and components for land-based systems. A number of these applications require materials with specific functional characteristics: for example, thick component, hybrid layups for environmental durability and stress management, and self-healing and smart composite matrices. At present, with limited success and very high cost, traditional composite fabrication technologies have been utilized to manufacture some large, complex-shape components of these materials. However, many challenges still remain in developing affordable, robust, and flexible manufacturing technologies for large, complex-shape components with multifunctional properties. The prepreg and melt infiltration (PREMI) technology provides an affordable and robust manufacturing route for low-cost, large-scale production of multifunctional ceramic composite components.

Gravitational lensing in quasar samples

NASA Astrophysics Data System (ADS)

Claeskens, Jean-François; Surdej, Jean

The first cosmic mirage was discovered approximately 20 years ago as the double optical counterpart of a radio source. This phenomenon had been predicted some 70 years earlier as a consequence of General Relativity. We present here a summary of what we have learnt since. The applications are so numerous that we had to concentrate on a few selected aspects of this new field of research. This review is focused on strong gravitational lensing, i.e. the formation of multiple images, in QSO samples. It is intended to give the reader an up-to-date status of the observations and to present an overview of its most interesting potential applications in cosmology and astrophysics, as well as numerous important results achieved so far. The first section follows an intuitive approach to the basics of gravitational lensing and is developed in view of our interest in multiply imaged quasars. The astrophysical and cosmological applications of gravitational lensing are outlined in Sect. 2 and the most important results are presented in Sect. 5. Sections 3 and 4 are devoted to the observations. Finally, conclusions are summarized in the last section. We have tried to avoid duplication with existing (and excellent) introductions to the field of gravitational lensing. For this reason, we did not concentrate on the individual properties of specific lens models, as these are already well presented in Narayan and Bartelmann (1996) and on a more intuitive ground in Refsdal and Surdej (1994). Wambsganss (1998) proposes a broad view on gravitational lensing in astronomy; the reviews by Fort and Mellier (1994) and Hattori et al. (1999) deal with lensing by galaxy clusters; microlensing in the Galaxy and the local group is reviewed by Paczynski (1996) and a general panorama on weak lensing is given by Bartelmann and Schneider (1999) and Mellier (1999). The monograph on the theory of gravitational lensing by Schneider, Ehlers and Falco (1992) also remains a reference in the field.

Vegetation and climate variability during the Last Interglacial evidenced in the pollen record from Lake Baikal

NASA Astrophysics Data System (ADS)

Granoszewski, W.; Demske, D.; Nita, M.; Heumann, G.; Andreev, A. A.

2005-04-01

A pollen record from the core sediments collected in the northern part of Lake Baikal represents the latest stage of the Taz (Saale) Glaciation, Kazantsevo (Eemian) Interglacial (namely the Last Interglacial), and the earliest stage of the Zyryanka (Weichselian) Glaciation. According to the palaeomagnetic-based age model applied to the core, the Last Interglacial in the Lake Baikal record lasted about 10.6 ky from 128 to 117.4 ky BP, being more or less synchronous with the Marine Isotope Stage 5e. The reconstructed changes in the south Siberian vegetation and climate are summarised as follows: a major spread of shrub alder ( Alnus fruticosa) and shrub birches ( Betula sect. Nanae/ Fruticosae) in the study area was a characteristic feature during the late glacial phase of the Taz Glaciation. Boreal trees e.g. spruce ( Picea obovata) and birch ( Betula sect. Albae) started to play an important role in the regional vegetation with the onset of the interglacial conditions. Optimal conditions for Abies sibirica- P. obovata taiga development occurred ca. 126.3 ky BP. The maximum spread of birch forest-steppe communities took place at the low altitudes ca. 126.5-125.5 ky BP and Pinus sylvestris started to form forests in the northern Baikal area after ca. 124.4 ky BP. Re-expansion of the steppe communities, as well as shrubby alder and willow communities and the disappearance of forest vegetation occurred at about 117.4 ky BP, suggesting the end of the interglacial succession. The changes in the pollen assemblages recorded in the sediments from northern Baikal point to a certain instability of the interglacial climate. Three phases of climate deterioration have been distinguished: 126-125.5, 121.5-120, and 119.5-119 ky BP. The penultimate cooling signal may be correlated with the cool oscillation recorded in European pollen records. However, such far distant correlation requires more careful investigation.

Impact of the Little Ice Age cooling and 20th century climate change on peatland vegetation dynamics in central and northern Alberta using a multi-proxy approach and high-resolution peat chronologies

NASA Astrophysics Data System (ADS)

Magnan, Gabriel; van Bellen, Simon; Davies, Lauren; Froese, Duane; Garneau, Michelle; Mullan-Boudreau, Gillian; Zaccone, Claudio; Shotyk, William

2018-04-01

Northern boreal peatlands are major terrestrial sinks of organic carbon and these ecosystems, which are highly sensitive to human activities and climate change, act as sensitive archives of past environmental change at various timescales. This study aims at understanding how the climate changes of the last 1000 years have affected peatland vegetation dynamics in the boreal region of Alberta in western Canada. Peat cores were collected from five bogs in the Fort McMurray region (56-57° N), at the southern limit of sporadic permafrost, and two in central Alberta (53° N and 55° N) outside the present-day limit of permafrost peatlands. The past changes in vegetation communities were reconstructed using detailed plant macrofossil analyses combined with high-resolution peat chronologies (14C, atmospheric bomb-pulse 14C, 210Pb and cryptotephras). Peat humification proxies (C/N, H/C, bulk density) and records of pH and ash content were also used to improve the interpretation of climate-related vegetation changes. Our study shows important changes in peatland vegetation and physical and chemical peat properties during the Little Ice Age (LIA) cooling period mainly from around 1700 CE and the subsequent climate warming of the 20th century. In some bogs, the plant macrofossils have recorded periods of permafrost aggradation during the LIA with drier surface conditions, increased peat humification and high abundance of ericaceous shrubs and black spruce (Picea mariana). The subsequent permafrost thaw was characterized by a short-term shift towards wetter conditions (Sphagnum sect. Cuspidata) and a decline in Picea mariana. Finally, a shift to a dominance of Sphagnum sect. Acutifolia (mainly Sphagnum fuscum) occurred in all the bogs during the second half of the 20th century, indicating the establishment of dry ombrotrophic conditions under the recent warmer and drier climate conditions.

Diversity patterns of selected Andean plant groups correspond to topography and habitat dynamics, not orogeny

PubMed Central

Mutke, Jens; Jacobs, Rana; Meyers, Katharina; Henning, Tilo; Weigend, Maximilian

2014-01-01

The tropical Andes are a hotspot of biodiversity, but detailed altitudinal and latitudinal distribution patterns of species are poorly understood. We compare the distribution and diversity patterns of four Andean plant groups on the basis of georeferenced specimen data: the genus Nasa (Loasaceae), the two South American sections of Ribes (sect. Parilla and sect. Andina, Grossulariaceae), and the American clade of Urtica (Urticaceae). In the tropical Andes, these often grow together, especially in (naturally or anthropogenically) disturbed or secondary vegetation at middle to upper elevations. The climatic niches of the tropical groups studied here are relatively similar in temperature and temperature seasonality, but do differ in moisture seasonality. The Amotape–Huancabamba Zone (AHZ) between 3 and 8° S shows a clear diversity peak of overall species richness as well as for narrowly endemic species across the groups studied. For Nasa, we also show a particular diversity of growth forms in the AHZ. This can be interpreted as proxy for a high diversity of ecological niches based on high spatial habitat heterogeneity in this zone. Latitudinal ranges are generally larger toward the margins of overall range of the group. Species number and number of endemic species of our taxa peak at elevations of 2,500–3,500 m in the tropical Andes. Altitudinal diversity patterns correspond well with the altitudinal distribution of slope inclination. We hypothesize that the likelihood and frequency of landslides at steeper slopes translate into temporal habitat heterogeneity. The frequency of landslides may be causally connected to diversification especially for the numerous early colonizing taxa, such as Urtica and annual species of Nasa. In contrast to earlier hypotheses, uplift history is not reflected in the pattern here retrieved, since the AHZ is the area of the most recent Andean uplift. Similarly, a barrier effect of the low-lying Huancabamba depression is not retrieved in our data. PMID:25346750

Toward the Design of Evidence-Based Mental Health Information Systems for People With Depression: A Systematic Literature Review and Meta-Analysis.

PubMed

Wahle, Fabian; Bollhalder, Lea; Kowatsch, Tobias; Fleisch, Elgar

2017-05-31

Existing research postulates a variety of components that show an impact on utilization of technology-mediated mental health information systems (MHIS) and treatment outcome. Although researchers assessed the effect of isolated design elements on the results of Web-based interventions and the associations between symptom reduction and use of components across computer and mobile phone platforms, there remains uncertainty with regard to which components of technology-mediated interventions for mental health exert the greatest therapeutic gain. Until now, no studies have presented results on the therapeutic benefit associated with specific service components of technology-mediated MHIS for depression. This systematic review aims at identifying components of technology-mediated MHIS for patients with depression. Consequently, all randomized controlled trials comparing technology-mediated treatments for depression to either waiting-list control, treatment as usual, or any other form of treatment for depression were reviewed. Updating prior reviews, this study aims to (1) assess the effectiveness of technology-supported interventions for the treatment of depression and (2) add to the debate on what components in technology-mediated MHIS for the treatment of depression should be standard of care. Systematic searches in MEDLINE, PsycINFO, and the Cochrane Library were conducted. Effect sizes for each comparison between a technology-enabled intervention and a control condition were computed using the standard mean difference (SMD). Chi-square tests were used to test for heterogeneity. Using subgroup analysis, potential sources of heterogeneity were analyzed. Publication bias was examined using visual inspection of funnel plots and Begg's test. Qualitative data analysis was also used. In an explorative approach, a list of relevant components was extracted from the body of literature by consensus between two researchers. Of 6387 studies initially identified, 45 met all inclusion criteria. Programs analyzed showed a significant trend toward reduced depressive symptoms (SMD -0.58, 95% CI -0.71 to -0.45, P<.001). Heterogeneity was large (I2≥76). A total of 15 components were identified. Technology-mediated MHIS for the treatment of depression has a consistent positive overall effect compared to controls. A total of 15 components have been identified. Further studies are needed to quantify the impact of individual components on treatment effects and to identify further components that are relevant for the design of future technology-mediated interventions for the treatment of depression and other mental disorders. ©Fabian Wahle, Lea Bollhalder, Tobias Kowatsch, Elgar Fleisch. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 31.05.2017.

Toward the Design of Evidence-Based Mental Health Information Systems for People With Depression: A Systematic Literature Review and Meta-Analysis

PubMed Central

Fleisch, Elgar

2017-01-01

Background Existing research postulates a variety of components that show an impact on utilization of technology-mediated mental health information systems (MHIS) and treatment outcome. Although researchers assessed the effect of isolated design elements on the results of Web-based interventions and the associations between symptom reduction and use of components across computer and mobile phone platforms, there remains uncertainty with regard to which components of technology-mediated interventions for mental health exert the greatest therapeutic gain. Until now, no studies have presented results on the therapeutic benefit associated with specific service components of technology-mediated MHIS for depression. Objective This systematic review aims at identifying components of technology-mediated MHIS for patients with depression. Consequently, all randomized controlled trials comparing technology-mediated treatments for depression to either waiting-list control, treatment as usual, or any other form of treatment for depression were reviewed. Updating prior reviews, this study aims to (1) assess the effectiveness of technology-supported interventions for the treatment of depression and (2) add to the debate on what components in technology-mediated MHIS for the treatment of depression should be standard of care. Methods Systematic searches in MEDLINE, PsycINFO, and the Cochrane Library were conducted. Effect sizes for each comparison between a technology-enabled intervention and a control condition were computed using the standard mean difference (SMD). Chi-square tests were used to test for heterogeneity. Using subgroup analysis, potential sources of heterogeneity were analyzed. Publication bias was examined using visual inspection of funnel plots and Begg’s test. Qualitative data analysis was also used. In an explorative approach, a list of relevant components was extracted from the body of literature by consensus between two researchers. Results Of 6387 studies initially identified, 45 met all inclusion criteria. Programs analyzed showed a significant trend toward reduced depressive symptoms (SMD –0.58, 95% CI –0.71 to –0.45, P<.001). Heterogeneity was large (I2≥76). A total of 15 components were identified. Conclusions Technology-mediated MHIS for the treatment of depression has a consistent positive overall effect compared to controls. A total of 15 components have been identified. Further studies are needed to quantify the impact of individual components on treatment effects and to identify further components that are relevant for the design of future technology-mediated interventions for the treatment of depression and other mental disorders. PMID:28566267

Research and Technology Activities Supporting Closed-Brayton-Cycle Power Conversion System Development

NASA Technical Reports Server (NTRS)

Barrett, Michael J.

2004-01-01

The elements of Brayton technology development emphasize power conversion system risk mitigation. Risk mitigation is achieved by demonstrating system integration feasibility, subsystem/component life capability (particularly in the context of material creep) and overall spacecraft mass reduction. Closed-Brayton-cycle (CBC) power conversion technology is viewed as relatively mature. At the 2-kWe power level, a CBC conversion system Technology Readiness Level (TRL) of six (6) was achieved during the Solar Dynamic Ground Test Demonstration (SD-GTD) in 1998. A TRL 5 was demonstrated for 10 kWe-class CBC components during the development of the Brayton Rotating Unit (BRU) from 1968 to 1976. Components currently in terrestrial (open cycle) Brayton machines represent TRL 4 for similar uses in 100 kWe-class CBC space systems. Because of the baseline component and subsystem technology maturity, much of the Brayton technology task is focused on issues related to systems integration. A brief description of ongoing technology activities is given.

Technology in Nonformal Education: A Critical Appraisal. Issues in Nonformal Education No. 2.

ERIC Educational Resources Information Center

Evans, David R.

In analyzing efforts to utilize technology in nonformal education programs, the applied communications aspects of instructional technology are most relevant, and locus of control and the technology of educational organization are two major components of analysis. Growing out of these components is the increasing recognition that educational…

VizieR Online Data Catalog: xi Tau UBV and MOST light curves (Nemravova+, 2016)

NASA Astrophysics Data System (ADS)

Nemravova, J. A.; Harmanec, P.; Broz, M.; Vokrouhlicky, D.; Mourard, D.; Hummel, C. A.; Cameron, C.; Matthews, J. M.; Bolton, C. T.; Bozic, H.; Chini, R.; Dembsky, T.; Engle, S.; Farrington, C.; Grunhut, J. H.; Guenther, D. B.; Guinan, E. F.; Korcakova, D.; Koubsky, P.; Kiek, R.; Kuschnig, R.; Mayer, P.; McCook, G. P.; Moffat, A. F. J.; Nardetto, N.; Pra, A.; Ribeiro, J.; Rowe, J.; Rucinski, S.; Skoda, P.; Slechta, M.; Tallon-Bosc, I.; Votruba, V.; Weiss, W. W.; Wolf, M.; Zasche, P.; Zavala, R. T.

2016-05-01

We present reduced observations, that were used in study of the quadruple hierarchical binary xi Tauri. The observational material consists of radial-velocity measurements (tabled1.dat), photometric measurements in the MOST filter (tabled2.dat), and Johnson's U (tabled3.dat), B (tabled4.dat), and V (tabled5.dat), and spectro-interferometric measurements represented by squared visibility moduli (tabled6.dat), and closure phases (tabled7.dat). The~description of the reductions is given in Appendices A (the spectroscopy), B (the photometry), and C (the spectro-interferometry). The procedure of radial-velocity measuring is described in Sect. 3.1. Headers of Tables D.1-D.7 published electronically are also given in Appendix D. (7 data files).

Design and Fabricate a Metallic Hydride Heat Pump with a Cooling Capacity of 9000 BTU/H

DTIC Science & Technology

1989-02-07

al-,’’’n e u’ I -n~ 1’r - t 31 al h,3 ) X harg .jor ~~ A-i 1 3Z art , > E u 1i qt ex !a .er kj 5i~ iu Sect-onal View of Hydri -de *0 3 c -x:"uding the...previus hydrie heat minutes, but can De varied from 30 sec, up to 10 transfer systems. The tubular nature of the de- mmn. _vice enables water that is...8217 iriding Kinetics", The ’an’t licf ecuaion. --an thtrfr be Journal of the Less-Common Metals, -(1983) t0 predict h-.d:rcoe p-ressure and,’or hydri u

MX Siting Investigation. Water Resources Program. Volume II. Review Draft, Water Appropriations Hearing Presentation and Support Documentation, Dry Lake Valley, Nevada.

DTIC Science & Technology

1981-09-30

will be required to de - liver the 651 gpm (41 l/s) needed for peak water use at the LSC. The existing Air Force test well at 3S-64E-12ca has been pumped...Valley is probably over 10,000 feet (3048 m) thick in the central part of the valley and is composed of alluvial fan, fluvial, playa , srl lacustrine...VALLEY T3.NSmIP STATION T E𔃾P SP. or SS. SILICA C AL C IU4 ACG. E5SILJ4 SCDIU I QANSA-SECT 5 6 C1 Ŕ VQ %;,. DES C CONE PH SOLIDS (5102) CA V$ A% 1 IN/6

Two New Isomers of Palmityl-4-hydroxycinnamate from Flowers of Taraxacum Species.

PubMed

Dudáš, Matej; Vilková, Mária; Béres, Tibor; Repcák, Miroslav; Mártonfi, Pavol

2016-06-01

Two isomers, (Z)- and (E)-palmityl 4-hydroxycinnamate [hexadecyl(2Z)-3-(4-hydroxyphenyl)prop-2-enoate and hexadecyl(2E)-3-(4-hydroxyphenyl)prop-2-enoate] were isolated for the first time from ligulate flowers of Taraxacum linearisquameum Soest (sect. Taraxacum). The highest amount of these compounds was detected in pollen grains; 0.26 mg/100 mg DW of the (E)-isomer and 0.096 mg/100 mg DW of the (Z)-isomer. The structures of these compounds were elucidated by a combination of HPLC-ESI-Qtof-MS and 1D and 2D NMR spectroscopy. Their presence was confirmed in other species of Taraxacum, but they were not found in the male - sterile triploid agamospermous taxon T. parnassicum.

Ceramic Matrix Composites for Rotorcraft Engines

NASA Technical Reports Server (NTRS)

Halbig, Michael C.

2011-01-01

Ceramic matrix composite (CMC) components are being developed for turbine engine applications. Compared to metallic components, the CMC components offer benefits of higher temperature capability and less cooling requirements which correlates to improved efficiency and reduced emissions. This presentation discusses a technology develop effort for overcoming challenges in fabricating a CMC vane for the high pressure turbine. The areas of technology development include small component fabrication, ceramic joining and integration, material and component testing and characterization, and design and analysis of concept components.

NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

NASA Technical Reports Server (NTRS)

Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

2000-01-01

The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

Modeling Temporal Variation in Social Network: An Evolutionary Web Graph Approach

NASA Astrophysics Data System (ADS)

Mitra, Susanta; Bagchi, Aditya

A social network is a social structure between actors (individuals, organization or other social entities) and indicates the ways in which they are connected through various social relationships like friendships, kinships, professional, academic etc. Usually, a social network represents a social community, like a club and its members or a city and its citizens etc. or a research group communicating over Internet. In seventies Leinhardt [1] first proposed the idea of representing a social community by a digraph. Later, this idea became popular among other research workers like, network designers, web-service application developers and e-learning modelers. It gave rise to a rapid proliferation of research work in the area of social network analysis. Some of the notable structural properties of a social network are connectedness between actors, reachability between a source and a target actor, reciprocity or pair-wise connection between actors with bi-directional links, centrality of actors or the important actors having high degree or more connections and finally the division of actors into sub-structures or cliques or strongly-connected components. The cycles present in a social network may even be nested [2, 3]. The formal definition of these structural properties will be provided in Sect. 8.2.1. The division of actors into cliques or sub-groups can be a very important factor for understanding a social structure, particularly the degree of cohesiveness in a community. The number, size, and connections among the sub-groups in a network are useful in understanding how the network, as a whole, is likely to behave.

The multifunctionality of berries toward blood platelets and the role of berry phenolics in cardiovascular disorders.

PubMed

Olas, Beata

2017-09-01

Diet and nutrition have an important influence on the prophylaxis and progression of cardiovascular disease; one example is the inhibition of blood platelet functions by specific components of fruits and vegetables. Garlic, onion, ginger, dark chocolate and polyunsaturated fatty acids all reduce blood platelet aggregation. A number of fruits contain a range of cardioprotective antioxidants and vitamins, together with a large number of non-nutrient phytochemicals such as phenolic compounds, which may possess both antioxidant properties and anti-platelet activity. Fresh berries and berry extracts possess high concentrations of phenolic compounds, i.e. phenolic acid, stilbenoids, flavonoids and lignans. The aim of this review article is to provide an overview of current knowledge of the anti-platelet activity of berries, which form an integral part of the human diet. It describes the effects of phenolic compounds present in a number of berries, i.e. black chokeberries - aronia berries (Aronia melanocarpa), blueberries (Vaccinium myrtillus), cranberries (Vaccinium sect. Oxycoccus), sea buckthorn berries (Hippophae rhamnoides) and grapes (Vitis), as well as various commercial products from berries (i.e. juices), on platelets and underlying mechanisms. Studies show that the effects of berries on platelet activity are dependent on not only the concentrations of the phenolic compounds in the berries or the class of phenolic compounds, but also the types of berry and the form (fresh berry, juice or medicinal product). Different results indicate that berries may play a role in the prevention of cardiovascular disorders, but the development of well-controlled clinical studies with berries is encouraged.

Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Hirt, Evelyn H.; Pitman, Stan G.

The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components.more » This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.« less

Scalable Power-Component Models for Concept Testing

DTIC Science & Technology

2011-08-17

Scalable Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release 2011 NDIA GROUND VEHICLE...Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release Page 2 of 8 technology that has yet...Technology Symposium (GVSETS) Scalable Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release

Software Component Technologies and Space Applications

NASA Technical Reports Server (NTRS)

Batory, Don

1995-01-01

In the near future, software systems will be more reconfigurable than hardware. This will be possible through the advent of software component technologies which have been prototyped in universities and research labs. In this paper, we outline the foundations for those technologies and suggest how they might impact software for space applications.

Group Work in a Technology-Rich Environment

ERIC Educational Resources Information Center

Penner, Nikolai; Schulze, Mathias

2010-01-01

This paper addresses several components of successful language-learning methodologies--group work, task-based instruction, and wireless computer technologies--and examines how the interplay of these three was perceived by students in a second-year university foreign-language course. The technology component of our learning design plays a central…

ECITE: A Testbed for Assessment of Technology Interoperability and Integration wiht Architecture Components

NASA Astrophysics Data System (ADS)

Graves, S. J.; Keiser, K.; Law, E.; Yang, C. P.; Djorgovski, S. G.

2016-12-01

ECITE (EarthCube Integration and Testing Environment) is providing both cloud-based computational testing resources and an Assessment Framework for Technology Interoperability and Integration. NSF's EarthCube program is funding the development of cyberinfrastructure building block components as technologies to address Earth science research problems. These EarthCube building blocks need to support integration and interoperability objectives to work towards a coherent cyberinfrastructure architecture for the program. ECITE is being developed to provide capabilities to test and assess the interoperability and integration across funded EarthCube technology projects. EarthCube defined criteria for interoperability and integration are applied to use cases coordinating science problems with technology solutions. The Assessment Framework facilitates planning, execution and documentation of the technology assessments for review by the EarthCube community. This presentation will describe the components of ECITE and examine the methodology of cross walking between science and technology use cases.

Development of high purity large forgings for nuclear power plants

NASA Astrophysics Data System (ADS)

Tanaka, Yasuhiko; Sato, Ikuo

2011-10-01

The recent increase in the size of energy plants has been supported by the development of manufacturing technology for high purity large forgings for the key components of the plant. To assure the reliability and performance of the large forgings, refining technology to make high purity steels, casting technology for gigantic ingots, forging technology to homogenize the material and consolidate porosity are essential, together with the required heat treatment and machining technologies. To meet these needs, the double degassing method to reduce impurities, multi-pouring methods to cast the gigantic ingots, vacuum carbon deoxidization, the warm forging process and related technologies have been developed and further improved. Furthermore, melting facilities including vacuum induction melting and electro slag re-melting furnaces have been installed. By using these technologies and equipment, large forgings have been manufactured and shipped to customers. These technologies have also been applied to the manufacture of austenitic steel vessel components of the fast breeder reactors and components for fusion experiments.

GaAs MOEMS Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

SPAHN, OLGA B.; GROSSETETE, GRANT D.; CICH, MICHAEL J.

2003-03-01

Many MEMS-based components require optical monitoring techniques using optoelectronic devices for converting mechanical position information into useful electronic signals. While the constituent piece-parts of such hybrid opto-MEMS components can be separately optimized, the resulting component performance, size, ruggedness and cost are substantially compromised due to assembly and packaging limitations. GaAs MOEMS offers the possibility of monolithically integrating high-performance optoelectronics with simple mechanical structures built in very low-stress epitaxial layers with a resulting component performance determined only by GaAs microfabrication technology limitations. GaAs MOEMS implicitly integrates the capability for radiation-hardened optical communications into the MEMS sensor or actuator component, a vitalmore » step towards rugged integrated autonomous microsystems that sense, act, and communicate. This project establishes a new foundational technology that monolithically combines GaAs optoelectronics with simple mechanics. Critical process issues addressed include selectivity, electrochemical characteristics, and anisotropy of the release chemistry, and post-release drying and coating processes. Several types of devices incorporating this novel technology are demonstrated.« less

Electrical and electronic devices and components: A compilation

NASA Technical Reports Server (NTRS)

1975-01-01

Components and techniques which may be useful in the electronics industry are described. Topics discussed include transducer technology, printed-circuit technology, solid state devices, MOS transistors, Gunn device, microwave antennas, and position indicators.

MEMS Deformable Mirror Technology Development for Space-Based Exoplanet Detection

NASA Astrophysics Data System (ADS)

Bierden, Paul; Cornelissen, S.; Ryan, P.

2014-01-01

In the search for earth-like extrasolar planets that has become an important objective for NASA, a critical technology development requirement is to advance deformable mirror (DM) technology. High-actuator-count DMs are critical components for nearly all proposed coronagraph instrument concepts. The science case for exoplanet imaging is strong, and rapid recent advances in test beds with DMs made using microelectromechanical system (MEMS) technology have motivated a number of compelling mission concepts that set technical specifications for their use as wavefront controllers. This research will advance the technology readiness of the MEMS DMs components that are currently at the forefront of the field, and the project will be led by the manufacturer of those components, Boston Micromachines Corporation (BMC). The project aims to demonstrate basic functionality and performance of this key component in critical test environments and in simulated operational environments, while establishing model-based predictions of its performance relative to launch and space environments. Presented will be the current status of the project with modeling and initial test results.

High spatial resolution detection of low-energy electrons using an event-counting method, application to point projection microscopy

NASA Astrophysics Data System (ADS)

Salançon, Evelyne; Degiovanni, Alain; Lapena, Laurent; Morin, Roger

2018-04-01

An event-counting method using a two-microchannel plate stack in a low-energy electron point projection microscope is implemented. 15 μm detector spatial resolution, i.e., the distance between first-neighbor microchannels, is demonstrated. This leads to a 7 times better microscope resolution. Compared to previous work with neutrons [Tremsin et al., Nucl. Instrum. Methods Phys. Res., Sect. A 592, 374 (2008)], the large number of detection events achieved with electrons shows that the local response of the detector is mainly governed by the angle between the hexagonal structures of the two microchannel plates. Using this method in point projection microscopy offers the prospect of working with a greater source-object distance (350 nm instead of 50 nm), advancing toward atomic resolution.

[Double ritual murder by the Satanist cult members based on the casuistry of the Forensic Medicine Department in Katowice].

PubMed

Chowaniec, Czesław; Jałfoński, Christian; Kabiesz-Neniczka, Stanisława; Kobek, Mariusz; Rygol, Krystian

2006-01-01

In recent years, an increased activity of various sects, especially Satanist ones, has been observed in Poland. This is associated with an increase in the number of various crimes, including offences against life and health. The ideology of Satanism came to Poland in the early eighties of the last century, along with heavy metal music and its variants. In 1999, two cases of the murders of a 21-year-old woman and a 19-year-old man committed by Satanist cult members during their ritual mass were reported at the Forensic Medicine Department in Katowice. In the report, the authors present some issues associated with Satanism, the circumstances of these two murders and the results of medico-legal examinations of the victims.

VizieR Online Data Catalog: NIBLES. I. The Nancay HI survey (van Driel+, 2016)

NASA Astrophysics Data System (ADS)

van Driel, M.; Butcher, Z.; Schneider, S.; Lehnert, M.; Minchin, R.; Blyth, S.-L.; Chemin, L.; Hallet, N.; Joseph, T.; Kotze, P.; Kraan-Korteweg, R. C.; Olofsson, H.; Ramatsoku, M.

2016-11-01

HI 21cm line spectra of the 1870 clearly or marginally detected SDSS sources obtained for NIBLES at the Nancay Radio Telescope. Please note that these include the six detections with velocities below the 900 km/s lower limit for the NIBLES statistical sample, which are listed in Table A.5 (NIBLES sources 0347, 1572, 1734, 1897, 2259, and 2326). See Sect. 3 of the paper for further details on data acquisition and reduction. Data have been smoothed in velocity to 18 km/s resolution (see exact number in the spectrum headers). A fitted polynomial baseline was substracted from the observed spectra. Velocities (first column) are heliocentric in the optical convention in units of km/s and flux densities (second column) are in Janskys. (4 data files).

Principles of designing cyber-physical system of producing mechanical assembly components at Industry 4.0 enterprise

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The task of developing principles of cyber-physical system constitution at the Industry 4.0 company of the item designing components of mechanical assembly production is being studied. The task has been solved by analyzing the components and technologies, which have some practical application in the digital production organization. The list of components has been defined and the authors proposed the scheme of the components and technologies interconnection in the Industry 4.0 of mechanical assembly production to make an uninterrupted manufacturing route of the item designing components with application of some cyber-physical systems.

Telling the Technology Story: PR Strategies for School Leaders. Backgrounder Brief. CoSN Essential Leadership Skills Series

ERIC Educational Resources Information Center

Consortium for School Networking (NJ1), 2006

2006-01-01

This Backgrounder Brief is an executive summary of "Telling the Technology Story: PR Strategies for School Leaders," a component of the Consortium for School Networking (CoSN) Essential Leadership Skills Series. Public relations is a critical component of a district's successful technology implementation--and it involves communicating on an…

Advanced component technologies for energy-efficient turbofan engines

NASA Technical Reports Server (NTRS)

Saunders, N. T.

1980-01-01

The paper reviews NASA's Energy Efficient Engine Project which was initiated to provide the advanced technology base for a new generation of fuel-conservative engines for introduction into airline service by the late 1980s. Efforts in this project are directed at advancing engine component and systems technologies to a point of demonstrating technology-readiness by 1984. Early results indicate high promise in achieving most of the goals established in the project.

A multi-level model of emerging technology: An empirical study of the evolution of biotechnology from 1976 to 2003

PubMed Central

van Witteloostuijn, Arjen

2018-01-01

In this paper, we develop an ecological, multi-level model that can be used to study the evolution of emerging technology. More specifically, by defining technology as a system composed of a set of interacting components, we can build upon the argument of multi-level density dependence from organizational ecology to develop a distribution-independent model of technological evolution. This allows us to distinguish between different stages of component development, which provides more insight into the emergence of stable component configurations, or dominant designs. We validate our hypotheses in the biotechnology industry by using patent data from the USPTO from 1976 to 2003. PMID:29795575

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1991-01-01

ATTAP activities were highlighted by test bed engine design and development activities; ceramic component design; materials and engine component characterization; ceramic component process development and fabrication; component rig testing; and test bed engine fabrication and testing. Specifically, ATTAP aims to develop and demonstrate the technology of structural ceramics that have the potential for competitive automotive engine life cycle cost and for operating for 3500 hours in a turbine engine environment at temperatures up to 1371 C (2500 F).

Research Technology

NASA Image and Video Library

2002-08-01

An array of components in a laboratory at NASA's Marshall Space Flight Center (MSFC) is being tested by the Flight Mechanics Office to develop an integrated navigation system for the second generation reusable launch vehicle. The laboratory is testing Global Positioning System (GPS) components, a satellite-based location and navigation system, and Inertial Navigation System (INS) components, sensors on a vehicle that determine angular velocity and linear acceleration at various points. The GPS and INS components work together to provide a space vehicle with guidance and navigation, like the push of the OnStar button in your car assists you with directions to a specific address. The integration will enable the vehicle operating system to track where the vehicle is in space and define its trajectory. The use of INS components for navigation is not new to space technology. The Space Shuttle currently uses them. However, the Space Launch Initiative is expanding the technology to integrate GPS and INS components to allow the vehicle to better define its position and more accurately determine vehicle acceleration and velocity. This advanced technology will lower operational costs and enhance the safety of reusable launch vehicles by providing a more comprehensive navigation system with greater capabilities. In this photograph, Dr. Jason Chuang of MSFC inspects an INS component in the laboratory.

Interactive Television: The State of the Industry.

ERIC Educational Resources Information Center

Galbreath, Jeremy

1996-01-01

Discusses interactive television in the context of the developing information superhighway. Topics include potential applications, including video on demand; telecommunications companies; digital media technologies; content; regulatory issues; the nature of technology users; origination components; distribution/infrastructure components;…

Arthropod surveillance programs: Basic components, strategies, and analysis

USDA-ARS?s Scientific Manuscript database

Effective entomological surveillance planning stresses a careful consideration of methodology, trapping technologies, and analysis techniques. Herein, the basic principles and technological components of arthropod surveillance plans are described, as promoted in the symposium “Advancements in arthro...

Study of multipactor suppression of microwave components using perforated waveguide technology for space applications

NASA Astrophysics Data System (ADS)

Ye, Ming; Li, Yun; He, Yongning; Daneshmand, Mojgan

2017-05-01

With the development of space technology, microwave components with increased power handling capability and reduced weight have been urgently required. In this work, the perforated waveguide technology is proposed to suppress the multipactor effect of high power microwave components. Meanwhile, this novel method has the advantage of reducing components' weight, which makes it to have great potential in space applications. The perforated part of the waveguide components can be seen as an electron absorber (namely, its total electron emission yield is zero) since most of the electrons impacting on this part will go out of the components. Based on thoroughly benchmarked numerical simulation procedures, we simulated an S band and an X band waveguide transformer to conceptually verify this idea. Both electron dynamic simulations and electrical loss simulations demonstrate that the perforation technology can improve the multipactor threshold at least ˜8 dB while maintaining the acceptable insertion loss level compared with its un-perforated components. We also found that the component with larger minimum gap is easier to achieve multipactor suppression. This effect is interpreted by a parallel plate waveguide model. What's more, to improve the multipactor threshold of the X band waveguide transformer with a minimum gap of ˜0.1 mm, we proposed a perforation structure with the slope edge and explained its mechanism. Future study will focus on further optimization of the perforation structure, size, and distribution to maximize the comprehensive performances of microwave components.

Distillation process using microchannel technology

DOEpatents

Tonkovich, Anna Lee [Dublin, OH; Simmons, Wayne W [Dublin, OH; Silva, Laura J [Dublin, OH; Qiu, Dongming [Carbondale, IL; Perry, Steven T [Galloway, OH; Yuschak, Thomas [Dublin, OH; Hickey, Thomas P [Dublin, OH; Arora, Ravi [Dublin, OH; Smith, Amanda [Galloway, OH; Litt, Robert Dwayne [Westerville, OH; Neagle, Paul [Westerville, OH

2009-11-03

The disclosed invention relates to a distillation process for separating two or more components having different volatilities from a liquid mixture containing the components. The process employs microchannel technology for effecting the distillation and is particularly suitable for conducting difficult separations, such as the separation of ethane from ethylene, wherein the individual components are characterized by having volatilities that are very close to one another.

Technology-delivered adaptations of motivational interviewing for health-related behaviors: A systematic review of the current research

PubMed Central

Shingleton, Rebecca M.; Palfai, Tibor P.

2015-01-01

Objectives The aims of this paper were to describe and evaluate the methods and efficacy of technology-delivered motivational interviewing interventions (TAMIs), discuss the challenges and opportunities of TAMIs, and provide a framework for future research. Methods We reviewed studies that reported using motivational interviewing (MI) based components delivered via technology and conducted ratings on technology description, comprehensiveness of MI, and study methods. Results The majority of studies were fully-automated and included at least one form of media rich technology to deliver the TAMI. Few studies provided complete descriptions of how MI components were delivered via technology. Of the studies that isolated the TAMI effects, positive changes were reported. Conclusion Researchers have used a range of technologies to deliver TAMIs suggesting feasibility of these methods. However, there are limited data regarding their efficacy, and strategies to deliver relational components remain a challenge. Future research should better characterize the components of TAMIs, empirically test the efficacy of TAMIs with randomized controlled trials, and incorporate fidelity measures. Practice Implications TAMIs are feasible to implement and well accepted. These approaches offer considerable potential to reduce costs, minimize therapist and training burden, and expand the range of clients that may benefit from adaptations of MI. PMID:26298219

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective

PubMed Central

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-01-01

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study. PMID:28347078

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective.

PubMed

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-09-07

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

The Islamic Republic of Pakistan: country profile.

PubMed

Newcomb, L

1986-07-01

This discussion of Pakistan covers the following: regions and cities; the dominant Islamic sect; ethnicity and language; population growth; housing; households and families; the labor force; and information sources. Currently, Pakistan is in a period of transition. In 1985 Pakistan was ruled under martial law. On December 30, 1985, martial law was lifted, and a modified version of the 1973 constitution was adopted, restoring fundamental rights of Pakistanis and powers of the judiciary. Pakistan is divided into 4 provinces. The last census recorded the 1981 population at 84.3 million, nearly double the 1961 figure of 42.9 million. By 1983, the population had tripled to nearly 93 million, making Pakistan the world's 9th most populous country, although in area it ranked 34th. Its 3% annual growth rate placed it among the world's fastest growing countries. Although created as a sanctuary for followers of Islam, Pakistan suffers from periodic disputes between the members of Islam's various sects. Generally, ethnic groups and the use of their native languages divide along provincial boundaries. Punjabi, the native tongue of Pakistan's predominant group, is spoken in 48% of all Pakistani households and in about 80% of Punjab and Islamabad Federal Territory households. Pakistan's sixth 5-year plan recognizes the need for an additional 1.4 million dwellings to adequately house the current population. In 1980, Pakistan's 12.6 million housing units averaged nearly 7 people per unit. The ideal Pakistani household is an extended family consisting of a married couple, their sons, and their sons' wives and children. At the death of the patriarch, each son establishes a separate household. Marriage solidifes all social relationships. Single adults have little place in society. Women, although protected by law, often are deprived of their legal rights where marriage is concerned. Only 23% of the population aged 10 or older has completed primary school. Fewer than 1% hold university degree. Little hard data are available about Pakistan's labor force. In 1985, the economically active population was estimated at 28.6 million compared with 10.4 million in 1951. Unemployment rose from an estimated 3.1% in 1981 to 3.5% in 1983. The Pakistani economy is currently on the upswing.

Multiple and asymmetrical origin of polyploid dog rose hybrids (Rosa L. sect. Caninae (DC.) Ser.) involving unreduced gametes.

PubMed

Herklotz, V; Ritz, C M

2017-08-01

Polyploidy and hybridization are important factors for generating diversity in plants. The species-rich dog roses ( Rosa sect. Caninae ) originated by allopolyploidy and are characterized by unbalanced meiosis producing polyploid egg cells (usually 4 x ) and haploid sperm cells (1 x ). In extant natural stands species hybridize spontaneously, but the extent of natural hybridization is unknown. The aim of the study was to document the frequency of reciprocal hybridization between the subsections Rubigineae and Caninae with special reference to the contribution of unreduced egg cells (5 x ) producing 6 x offspring after fertilization with reduced (1 x ) sperm cells. We tested whether hybrids arose by independent multiple events or via a single or few incidences followed by a subsequent spread of hybrids. Population genetics of 45 mixed stands of dog roses across central and south-eastern Europe were analysed using microsatellite markers and flow cytometry. Hybrids were recognized by the presence of diagnostic alleles and multivariate statistics were used to display the relationships between parental species and hybrids. Among plants classified to subsect. Rubigineae , 32 % hybridogenic individuals were detected but only 8 % hybrids were found in plants assigned to subsect. Caninae . This bias between reciprocal crossings was accompanied by a higher ploidy level in Rubigineae hybrids, which originated more frequently by unreduced egg cells. Genetic patterns of hybrids were strongly geographically structured, supporting their independent origin. The biased crossing barriers between subsections are explained by the facilitated production of unreduced gametes in subsect. Rubigineae . Unreduced egg cells probably provide the highly homologous chromosome sets required for correct chromosome pairing in hybrids. Furthermore, the higher frequency of Rubigineae hybrids is probably influenced by abundance effects because the plants of subsect. Caninae are much more abundant and thus provide large quantities of pollen. Hybrids are formed spontaneously, leading to highly diverse mixed stands, which are insufficiently characterized by the actual taxonomy. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Phytochemical investigations and antiproliferative secondary metabolites from Thymus alternans growing in Slovakia.

PubMed

Dall'Acqua, Stefano; Peron, Gregorio; Ferrari, Sara; Gandin, Valentina; Bramucci, Massimo; Quassinti, Luana; Mártonfi, Pavol; Maggi, Filippo

2017-12-01

Thymus alternans Klokov (Lamiaceae) is a neglected species of the genus Thymus (Sect. Serpyllum) endemic to Carpathian area, where it is used as a flavouring agent and for medicinal purposes. The aim of the work was to identify antiproliferative constituents from the flowering aerial parts of this plant. Thymus alternans extracts were analyzed by HPLC-MS n and subjected to extensive chromatographic separations. The isolated compounds (phenolics and triterpenes) were structurally elucidated by MS and 1D and 2D NMR experiments. Essential oil (EO) composition was determined by GC-FID and GC-MS. Six purified triterpenes and EO were assayed for in vitro antiproliferative activity against a panel of human cancer cells, namely, breast (MDA-MB 231), colon (HCT-15 and HCT116), lung (U1810), pancreatic (BxPC3), melanoma (A375) and cervical carcinoma (A431) cells. The structures of the isolated compounds were achieved on the basis of H-NMR and MS experiments. Luteolin-4'-O-β-d-glucopyranoside (P1), chrysoeriol-7-O-β-d-glucopyranoside (P2), chrysoeriol-5-O-β-d-glucopyranoside (P3), apigenin-7-O-β-d-glucopyranoside (P4), rosmarinic acid (P5), rosmarinic acid-3'-O-β-d-glucopyranoside (P6), caffeic acid-3-O-β-d-glucopyranoside (P7), 3α-hydroxy-urs-12,15-diene (T1), α-amyrin (T2), β-amyrin (T3), isoursenol (T4), epitaraxerol (T5), and oleanolic acid (T6). GC-MS analysis revealed that the EO of T. alternans was devoid of phenols and belonged to the nerolidol-chemotype, that is typical of the Sect. Serpyllum. The six purified triterpenes (T1-T6) were active with IC 50 ranging from 0.5 to 5 μM being comparable or better than those of reference compounds betulinic acid and cisplatin. The EO exhibited significant effects on A375, MDA-MB 231 and HCT116 cell lines with IC 50 in the range of 5-8 μg/mL. The reported results suggest that T. alternans can be considered as a good source of phytoconstituents with possible importance in the pharmaceutical field.

Evolution of blue-flowered species of genus Linum based on high-throughput sequencing of ribosomal RNA genes.

PubMed

Bolsheva, Nadezhda L; Melnikova, Nataliya V; Kirov, Ilya V; Speranskaya, Anna S; Krinitsina, Anastasia A; Dmitriev, Alexey A; Belenikin, Maxim S; Krasnov, George S; Lakunina, Valentina A; Snezhkina, Anastasiya V; Rozhmina, Tatiana A; Samatadze, Tatiana E; Yurkevich, Olga Yu; Zoshchuk, Svyatoslav A; Amosova, Аlexandra V; Kudryavtseva, Anna V; Muravenko, Olga V

2017-12-28

The species relationships within the genus Linum have already been studied several times by means of different molecular and phylogenetic approaches. Nevertheless, a number of ambiguities in phylogeny of Linum still remain unresolved. In particular, the species relationships within the sections Stellerolinum and Dasylinum need further clarification. Also, the question of independence of the species of the section Adenolinum still remains unanswered. Moreover, the relationships of L. narbonense and other species of the section Linum require further clarification. Additionally, the origin of tetraploid species of the section Linum (2n = 30) including the cultivated species L. usitatissimum has not been explored. The present study examines the phylogeny of blue-flowered species of Linum by comparisons of 5S rRNA gene sequences as well as ITS1 and ITS2 sequences of 35S rRNA genes. High-throughput sequencing has been used for analysis of multicopy rRNA gene families. In addition to the molecular phylogenetic analysis, the number and chromosomal localization of 5S and 35S rDNA sites has been determined by FISH. Our findings confirm that L. stelleroides forms a basal branch from the clade of blue-flowered flaxes which is independent of the branch formed by species of the sect. Dasylinum. The current molecular phylogenetic approaches, the cytogenetic analysis as well as different genomic DNA fingerprinting methods applied previously did not discriminate certain species within the sect. Adenolinum. The allotetraploid cultivated species L. usitatissimum and its wild ancestor L. angustifolium (2n = 30) could originate either as the result of hybridization of two diploid species (2n = 16) related to the modern L. gandiflorum and L. decumbens, or hybridization of a diploid species (2n = 16) and a diploid ancestor of modern L. narbonense (2n = 14). High-throughput sequencing of multicopy rRNA gene families allowed us to make several adjustments to the phylogeny of blue-flowered flax species and also reveal intra- and interspecific divergence of the rRNA gene sequences.

Contrasting evolutionary processes during Quaternary climatic changes and historical orogenies: a case study of the Japanese endemic primroses Primula sect. Reinii.

PubMed

Yamamoto, Masaya; Ohtani, Masato; Kurata, Kaoruko; Setoguchi, Hiroaki

2017-11-28

Recent biogeographic studies have illustrated that Quaternary climatic changes and historical orogenies have driven the development of high levels of biodiversity. In this context, phylogenetic niche conservatism may play a role as a major precursor of allopatric speciation. However, the effects of niche evolution on the diversification patterns of plant species under rapid habitat changes are still unknown. Here, Primula section Reinii, one of the few primroses endemic to the Japanese Archipelago, was investigated. This study aimed to clarify the phylogenetic position and relationships of section Reinii, interpret the biogeographic and diversification patterns of this group and gain a better understanding of the role of climatic niche evolution in the Japanese endemic primroses. Dated phylogeny for Primula section Reinii is presented based on the sequences of six chloroplast genes and one nuclear gene. Biogeographic history was reconstructed using statistical dispersal-vicariance analysis. Macro-evolutionary modelling of the climatic niche was combined with biogeographic inferences. Section Reinii was shown to be monophyletic based on chloroplast and nuclear sequences. Fossil-calibrated dating analysis estimated that this section diverged from its sister taxon, sect. Cortusoides, around 1.82 million years ago, and intraspecific diversification occurred within the last million years. This time frame was characterized by Quaternary climatic oscillations and uplift of high mountains in Japan. Biogeographic inference suggested that this section originated at the northern end of the Japanese Archipelago and then dispersed southward to other islands. Models of climatic niche evolution indicated that the closely related species P. reinii and P. tosanensis have contrasting niche optima and rates of niche evolution. Our results highlight that spatiotemporal heterogeneity in the Japanese islands may play a significant role in the biogeographic history of Japanese endemic primroses. Contrasting evolutionary processes found in closely related species illustrate the effects of climatic niche evolution on species' diversification patterns. © The Author 2017. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For permissions, please email: journals.permissions@oup.com

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nute, J; Jacobsen, M; Popnoe, D

Purpose: Intracranial hemorrhage and calcification with Single-Energy CT (SECT) attenuation below 100HU cannot be reliably identified using currently clinically available means. Calcification is typically benign but hemorrhage can carry a risk of intracranial bleeding and contraindicate use of anticoagulant therapies. A biologically-relevant phantom was used to investigate identification of unknown intracranial lesions using dual-energy CT (DECT) as a verification of prior lesion differentiation results. Methods: Prior phantom work investigating calcification and hemorrhage differentiation resulted in 3D-DECT raw data (water density, calcium density, 68keV) for a range of DECT protocol variations: image thicknesses (1.25, 2.5, 3.75, 5mm), CTDIvol (36.7 to 132.6mGy)more » and reconstruction algorithms (Soft, Standard, Detail). Acquisition-specific raw data were used to create a plane of optimal differentiation based on the geometric bisector of 3D-linear regression of the two lesion distributions. Verification hemorrhage and calcification lesions, ranging in size from 0.5 to 1.5cm, were created at varying attenuation from 50 to 100HU. Lesions were inserted into a biologically-relevant brain phantom and scanned using SECT (3.75mm images, Standard, 67mGy) and a range of DECT protocols (3.75mm images, Standard, [67, 105.6, 132.6mGy]). 3D-DECT data were collected and blinded for analysis. The 3D-DECT distribution of the lesion was then compared to the acquisition-matched geometric bisector plane and the mean lesion value’s position relative to the plane, indicating lesion identity, and the percentage of voxels on the identified side of the plane, indicating identification confidence, were derived. Results: 98% of the 120 lesions investigated were identified correctly as hemorrhage or calcification. 74% were identified with greater than 80% confidence. Increases in CTDIvol and lesion diameter were associated with increased identification confidence. Conclusion: Intracranial lesions of unknown etiology were identified with 80% confidence for 74% of lesions investigated. These phantom data suggest that the identification of intracranial lesions below 100HU is clinically feasible using DECT. This research was conducted at the MD Anderson Center for Advanced Biomedical Imaging in-part with equipment support from General Electric Healthcare.« less

Automated reuseable components system study results

NASA Technical Reports Server (NTRS)

Gilroy, Kathy

1989-01-01

The Automated Reusable Components System (ARCS) was developed under a Phase 1 Small Business Innovative Research (SBIR) contract for the U.S. Army CECOM. The objectives of the ARCS program were: (1) to investigate issues associated with automated reuse of software components, identify alternative approaches, and select promising technologies, and (2) to develop tools that support component classification and retrieval. The approach followed was to research emerging techniques and experimental applications associated with reusable software libraries, to investigate the more mature information retrieval technologies for applicability, and to investigate the applicability of specialized technologies to improve the effectiveness of a reusable component library. Various classification schemes and retrieval techniques were identified and evaluated for potential application in an automated library system for reusable components. Strategies for library organization and management, component submittal and storage, and component search and retrieval were developed. A prototype ARCS was built to demonstrate the feasibility of automating the reuse process. The prototype was created using a subset of the classification and retrieval techniques that were investigated. The demonstration system was exercised and evaluated using reusable Ada components selected from the public domain. A requirements specification for a production-quality ARCS was also developed.

14 CFR 1274.915 - Restrictions on sale or transfer of technology to foreign firms or institutions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... licensing of the technology. Transfers include: (1) Sales of products or components, (2) Licenses of software or documentation related to sales of products or components, or (3) Transfers to foreign...

14 CFR § 1274.915 - Restrictions on sale or transfer of technology to foreign firms or institutions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... licensing of the technology. Transfers include: (1) Sales of products or components, (2) Licenses of software or documentation related to sales of products or components, or (3) Transfers to foreign...

14 CFR 1274.915 - Restrictions on sale or transfer of technology to foreign firms or institutions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... licensing of the technology. Transfers include: (1) Sales of products or components, (2) Licenses of software or documentation related to sales of products or components, or (3) Transfers to foreign...

Final Technical Report - Center for Technology for Advanced Scientific Component Software (TASCS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sussman, Alan

2014-10-21

This is a final technical report for the University of Maryland work in the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS). The Maryland work focused on software tools for coupling parallel software components built using the Common Component Architecture (CCA) APIs. Those tools are based on the Maryland InterComm software framework that has been used in multiple computational science applications to build large-scale simulations of complex physical systems that employ multiple separately developed codes.

Roughness and compressive strength of FDM 3D printed specimens affected by acetone vapour treatment

NASA Astrophysics Data System (ADS)

Beniak, Juraj; Križan, Peter; Šooš, Ľubomír; Matúš, Miloš

2018-01-01

Rapid Prototyping technologies are the fastest growing technologies in the manufacturing of components and parts. There are many techniques which can be used with different materials and different purposes of produced part. Gradually, Rapid Prototyping systems have grown into Additive Manufacturing, because technology expansion brings faster production, improved manufactured components, and expanded palette of used materials. So now this techniques are also used for regular production of special parts, where is usual change of part design, where is necessary to produce variety of different designs and shapes. The following article deals with Fused Deposition Modelling (FDM) technology, the core of which is the manufacture models and components from thermoplastic polymers by deposition single fibres of semi-molten plastic material layer by layer. The article focuses on the results of research for testing of manufactured specimens by FDM technology. Components are modified by acetone vapour for surface smoothing. The purpose is to point out how the additional specimen treatment influence the strength properties. Presented paper shows realized experiments and measurements of compressive force on specimens and surface roughness which are influenced by acetone vapour treatment.

High speed photodiodes in standard nanometer scale CMOS technology: a comparative study.

PubMed

Nakhkoob, Behrooz; Ray, Sagar; Hella, Mona M

2012-05-07

This paper compares various techniques for improving the frequency response of silicon photodiodes fabricated in mainstream CMOS technology for fully integrated optical receivers. The three presented photodiodes, Spatially Modulated Light detectors, Double, and Interrupted P-Finger photodiodes, aim at reducing the low speed diffusive component of the photo generated current. For the first photodiode, Spatially Modulated Light (SML) detectors, the low speed current component is canceled out by converting it to a common mode current driving a differential transimpedance amplifier. The Double Photodiode (DP) uses two depletion regions to increase the fast drift component, while the Interrupted-P Finger Photodiode (IPFPD) redirects the low speed component towards a different contact from the main fast terminal of the photodiode. Extensive device simulations using 130 nm CMOS technology-parameters are presented to compare their performance using the same technological platform. Finally a new type of photodiode that uses triple well CMOS technology is introduced that can achieve a bandwidth of roughly 10 GHz without any process modification or high reverse bias voltages that would jeopardize the photodetector and subsequent transimpedance amplifier reliability.

Fundamental Technology Development for Gas-Turbine Engine Health Management

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

2007-01-01

Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

Recent advances in Ni-H2 technology at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Gonzalezsanabria, O. D.; Britton, D. L.; Smithrick, J. J.; Reid, M. A.

1986-01-01

The NASA Lewis Research Center has concentrated its efforts on advancing the Ni-H2 system technology for low Earth orbit applications. Component technology as well as the design principles were studied in an effort to understand the system behavior and failure mechanisms in order to increase performance and extend cycle life. The design principles were previously addressed. The component development is discussed, in particular the separator and nickel electrode and how these efforts will advance the Ni-H2 system technology.

Life assessment of structural components using inelastic finite element analyses

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

1993-01-01

The need for enhanced and improved performance of structural components subject to severe cyclic thermal/mechanical loadings, such as in the aerospace industry, requires development of appropriate solution technologies involving time-dependent inelastic analyses. Such analyses are mandatory to predict local stress-strain response and to assess more accurately the cyclic life time of structural components. The NASA-Lewis Research Center is cognizant of this need. As a result of concerted efforts at Lewis during the last few years, several such finite element solution technologies (in conjunction with the finite element program MARC) were developed and successfully applied to numerous uniaxial and multiaxial problems. These solution technologies, although developed for use with MARC program, are general in nature and can easily be extended for adaptation with other finite element programs such as ABAQUS, ANSYS, etc. The description and results obtained from two such inelastic finite element solution technologies are presented. The first employs a classical (non-unified) creep-plasticity model. An application of this technology is presented for a hypersonic inlet cowl-lip problem. The second of these technologies uses a unified creep-plasticity model put forth by Freed. The structural component for which this finite element solution technology is illustrated, is a cylindrical rocket engine thrust chamber. The advantages of employing a viscoplastic model for nonlinear time-dependent structural analyses are demonstrated. The life analyses for cowl-lip and cylindrical thrust chambers are presented. These analyses are conducted by using the stress-strain response of these components obtained from the corresponding finite element analyses.

Modern trends in industrial technology of production of optical polymeric components for night vision devices

NASA Astrophysics Data System (ADS)

Goev, A. I.; Knyazeva, N. A.; Potelov, V. V.; Senik, B. N.

2005-06-01

The present paper represents in detail the complex approach to creating industrial technology of production of polymeric optical components: information has been given on optical polymeric materials, automatic machines for injection moulding, the possibilities of the Moldflow system (the AB "Universal" company) used for mathematical simulation of the technological process of injection moulding and making the moulds.

NASA/ESTO investments in remote sensing technologies (Conference Presentation)

NASA Astrophysics Data System (ADS)

Babu, Sachidananda R.

2017-02-01

For more then 18 years NASA Earth Science Technology Office has been investing in remote sensing technologies. During this period ESTO has invested in more then 900 tasks. These tasks are managed under multiple programs like Instrument Incubator Program (IIP), Advanced Component Technology (ACT), Advanced Information Systems Technology (AIST), In-Space Validation of Earth Science Technologies (InVEST), Sustainable Land Imaging - Technology (SLI-T) and others. This covers the whole spectrum of technologies from component to full up satellite in space and software. Over the years many of these technologies have been infused into space missions like Aquarius, SMAP, CYGNSS, SWOT, TEMPO and others. Over the years ESTO is actively investing in Infrared sensor technologies for space applications. Recent investments have been for SLI-T and InVEST program. On these tasks technology development is from simple Bolometers to Advanced Photonic waveguide based spectrometers. Some of the details on these missions and technologies will be presented.

ESTO Investments in Innovative Sensor Technologies for Remote Sensing

NASA Technical Reports Server (NTRS)

Babu, Sachidananda R.

2017-01-01

For more then 18 years NASA Earth Science Technology Office has been investing in remote sensing technologies. During this period ESTO has invested in more then 900 tasks. These tasks are managed under multiple programs like Instrument Incubator Program (IIP), Advanced Component Technology (ACT), Advanced Information Systems Technology (AIST), In-Space Validation of Earth Science Technologies (InVEST), Sustainable Land Imaging - Technology (SLI-T) and others. This covers the whole spectrum of technologies from component to full up satellite in space and software. Over the years many of these technologies have been infused into space missions like Aquarius, SMAP, CYGNSS, SWOT, TEMPO and others. Over the years ESTO is actively investing in Infrared sensor technologies for space applications. Recent investments have been for SLI-T and InVEST program. On these tasks technology development is from simple Bolometers to Advanced Photonic waveguide based spectrometers. Some of the details on these missions and technologies will be presented.

Measurement component technology. Volume 1: Cryogenic pressure measurement technology, high pressure flange seals, hydrogen embrittlement of pressure transducer material, close coupled versus remote transducer installation and temperature compensation of pressure transducers

NASA Technical Reports Server (NTRS)

Hayakawa, K. K.; Udell, D. R.; Iwata, M. M.; Lytle, C. F.; Chrisco, R. M.; Greenough, C. S.; Walling, J. A.

1972-01-01

The results are presented of an investigation into the availability and performance capability of measurement components in the area of cryogenic temperature, pressure, flow and liquid detection components and high temperature strain gages. In addition, technical subjects allied to the components were researched and discussed. These selected areas of investigation were: (1) high pressure flange seals, (2) hydrogen embrittlement of pressure transducer diaphragms, (3) The effects of close-coupled versus remote transducer installation on pressure measurement, (4) temperature transducer configuration effects on measurements, and (5) techniques in temperature compensation of strain gage pressure transducers. The purpose of the program was to investigate the latest design and application techniques in measurement component technology and to document this information along with recommendations for upgrading measurement component designs for future S-2 derivative applications. Recommendations are provided for upgrading existing state-of-the-art in component design, where required, to satisfy performance requirements of S-2 derivative vehicles.

Methanol Extracts of 28 Hieracium Species from the Balkan Peninsula - Comparative LC-MS Analysis, Chemosystematic Evaluation of their Flavonoid and Phenolic Acid Profiles and Antioxidant Potentials.

PubMed

Milutinović, Violeta; Niketić, Marjan; Ušjak, Ljuboš; Nikolić, Dejan; Krunić, Aleksej; Zidorn, Christian; Petrović, Silvana

2018-01-01

Hieracium s. str. represents one of the largest and most complex genera of flowering plants. As molecular genetics seems unlikely to disentangle intricate relationships within this reticulate species complex, analysis of flavonoids and phenolic acids, known as good chemosystematic markers, promise to be more reliable. Data about pharmacological activity of Hieracium species are scarce. Evaluation of the chemosystematic significance of flavonoids and phenolic acids of methanol extracts of aerial flowering parts of 28 Hieracium species from the Balkans. Additionally, investigation of antioxidant potentials of the extracts. Comparative qualitative and quantitative analysis of flavonoids and phenolic acids was performed by LC-MS. Multivariate statistical data analysis included non-metric multidimensional scaling (nMDS), unweighted pair-group arithmetic averages (UPGMA) and principal component analysis (PCA). Antioxidant activity was evaluated using three colorimetric tests. Dominant phenolics in almost all species were luteolin type flavonoids, followed by phenolic acids. Although the investigated Hieracium species share many compounds, the current classification of the genus was supported by nMDS and UPGMA analyses with a good resolution to the group level. Hieracium naegelianum was clearly separated from the other investigated species. Spatial and ecological distances of the samples were likely to influence unexpected differentiation of some groups within H. sect. Pannosa. The vast majority of dominant compounds significantly contributed to differences between taxa. The antioxidant potential of the extracts was satisfactory and in accordance with their phenolics composition. Comparative LC-MS analysis demonstrated that flavonoids and phenolic acids are good indicators of chemosystematic relationships within Hieracium, particularly between non-hybrid species and groups from the same location. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Making Ceramic Components For Advanced Aircraft Engines

NASA Technical Reports Server (NTRS)

Franklin, J. E.; Ezis, A.

1994-01-01

Lightweight, oxidation-resistant silicon nitride components containing intricate internal cooling and hydraulic passages and capable of withstanding high operating temperatures made by ceramic-platelet technology. Used to fabricate silicon nitride test articles of two types: components of methane-cooled regenerator for air turbo ramjet engine and components of bipropellant injector for rocket engine. Procedures for development of more complex and intricate components established. Technology has commercial utility in automotive, aircraft, and environmental industries for manufacture of high-temperature components for use in regeneration of fuels, treatment of emissions, high-temperature combustion devices, and application in which other high-temperature and/or lightweight components needed. Potential use in fabrication of combustors and high-temperature acoustic panels for suppression of noise in future high-speed aircraft.

Cost/benefit analysis of advanced material technologies for small aircraft turbine engines

NASA Technical Reports Server (NTRS)

Comey, D. H.

1977-01-01

Cost/benefit studies were conducted on ten advanced material technologies applicable to small aircraft gas turbine engines to be produced in the 1985 time frame. The cost/benefit studies were applied to a two engine, business-type jet aircraft in the 6800- to 9100-Kg (15,000- to 20,000-lb) gross weight class. The new material technologies are intended to provide improvements in the areas of high-pressure turbine rotor components, high-pressure turbine rotor components, high-pressure turbine stator airfoils, and static structural components. The cost/benefit of each technology is presented in terms of relative value, which is defined as a change in life cycle cost times probability of success divided by development cost. Technologies showing the most promising cost/benefits based on relative value are uncooled single crystal MAR-M 247 turbine blades, cooled DS MAR-M 247 turbine blades, and cooled ODS 'M'CrAl laminate turbine stator vanes.

Conceptual design study: Forest Fire Advanced System Technology (FFAST)

NASA Technical Reports Server (NTRS)

Nichols, J. D.; Warren, J. R.

1986-01-01

An integrated forest fire detection and mapping system that will be based upon technology available in the 1990s was defined. Uncertainties in emerging and advanced technologies related to the conceptual design were identified and recommended for inclusion as preferred system components. System component technologies identified for an end-to-end system include thermal infrared, linear array detectors, automatic georeferencing and signal processing, geosynchronous satellite communication links, and advanced data integration and display. Potential system configuration options were developed and examined for possible inclusion in the preferred system configuration. The preferred system configuration will provide increased performance and be cost effective over the system currently in use. Forest fire management user requirements and the system component emerging technologies were the basis for the system configuration design. A preferred system configuration was defined that warrants continued refinement and development, examined economic aspects of the current and preferred system, and provided preliminary cost estimates for follow-on system prototype development.

Miniaturization of components and systems for space using MEMS-technology

NASA Astrophysics Data System (ADS)

Grönland, Tor-Arne; Rangsten, Pelle; Nese, Martin; Lang, Martin

2007-06-01

Development of MEMS-based (micro electro mechanical system) components and subsystems for space applications has been pursued by various research groups and organizations around the world for at least two decades. The main driver for developing MEMS-based components for space is the miniaturization that can be achieved. Miniaturization can not only save orders of magnitude in mass and volume of individual components, but it can also allow increased redundancy, and enable novel spacecraft designs and mission scenarios. However, the commercial breakthrough of MEMS has not occurred within the space business as it has within other branches such as the IT/telecom or automotive industries, or as it has in biotech or life science applications. A main explanation to this is the highly conservative attitude to new technology within the space community. This conservatism is in many senses motivated by a very low risk acceptance in the few and costly space projects that actually ends with a space flight. To overcome this threshold there is a strong need for flight opportunities where reasonable risks can be accepted. Currently there are a few flight opportunities allowing extensive use of new technology in space, but one of the exceptions is the PRISMA program. PRISMA is an international (Sweden, Germany, France, Denmark, Norway, Greece) technology demonstration program with focus on rendezvous and formation flying. It is a two satellite LEO mission with a launch scheduled for the first half of 2009. On PRISMA, a number of novel technologies e.g. RF metrology sensor for Darwin, autonomous formation flying based on GPS and vision-based sensors, ADN-based "green propulsion" will be demonstrated in space for the first time. One of the satellites will also have a miniaturized propulsion system onboard based on MEMS-technology. This novel propulsion system includes two microthruster modules, each including four thrusters with micro- to milli-Newton thrust capability. The novelty of this micropropulsion system is that all critical components such as thrust chamber/nozzle assembly including internal heaters, valves and filters are manufactured using MEMS technology. Moreover, miniaturized pressure sensors, relying on MEMS technology, is also part of the system as a self-standing component. The flight opportunity on PRISMA represents one of the few and thus important opportunities to demonstrate MEMS technology in space. The present paper aims at describing this development effort and highlights the benefits of miniaturized components and systems for space using MEMS technology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultz, A.L.

The Lopez Field was discovered June 27, 1936, by the Mills Bennett Production Co.'s Jesus Lopez No. 1 near the middle of the west half of Sect. 73 (Tract 10) in Webb County, Texas. Over 380 wells have been drilled in the Lopez Field and over 180 of these were in what is now the South Lopez Unit. In 1959, water injection commenced and since then the field has been under some type of secondary recovery program. The first Mirando sand is an eocene lenticular sand composed of 2 units separated by a limy sand permeability barrier. The upper unitmore » appears to have been associated with a transgressive nearshore environment and the lower unit has been deposited in the Delta Plain facies of the high-constructive Delta. The abundance of lignite seen in cores in various wells places the deposition of both units very nearshore.« less

Influence of Tantra on ayurveda and Kamasutra.

PubMed

Rao, B Rama

2004-01-01

A close study of ancient works of ayurveda and Kamasutra shows that the knowledge of anatomy and physiology of different parts of reproductive organs particularly of female genitals is lacking. Hymen, defloration and clitoris do not find any mention in earlier works. Works of medieval and late medieval period mention the different parts and their utility and function especially in the sexual enjoyment. Worship of vagina or Yonipuja was a common practice in some sects of Tantrists like Kaulas, Kapalikas and others. This practice resulted in the close observation of different parts and thereby knowing their importance and role in the sexual enjoyment, which was also a part of the practices of Tantrism. This knowledge appears to have been incorporated in works like Bhavaprakasa of ayurveda and Paururavamanasijasutra and others of Kamasutra. They describe three Nadis in the female genitalia and clitoris others.

High resolution x-ray Thomson scattering measurements from cryogenic hydrogen jets using the linac coherent light source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fletcher, L. B., E-mail: lbfletch@slac.stanford.edu; Galtier, E.; Gamboa, E. J.

2016-11-15

We present the first spectrally resolved measurements of x-rays scattered from cryogenic hydrogen jets in the single photon counting limit. The 120 Hz capabilities of the LCLS, together with a novel hydrogen jet design [J. B. Kim et al., Rev. Sci. Instrum. (these proceedings)], allow for the ability to record a near background free spectrum. Such high-dynamic-range x-ray scattering measurements enable a platform to study ultra-fast, laser-driven, heating dynamics of hydrogen plasmas. This measurement has been achieved using two highly annealed pyrolytic graphite crystal spectrometers to spectrally resolve 5.5 keV x-rays elastically and inelastically scattered from cryogenic hydrogen and focusedmore » on Cornell-SLAC pixel array detectors [S. Herrmann et al., Nucl. Instrum. Methods Phys. Res., Sect. A 718, 550 (2013)].« less

Sectarianism and the problem of overpopulation: political representations of reproduction in two low-income neighbourhoods of Beirut, Lebanon.

PubMed

Premkumar, Ashish; Salem, Karma; Akhtar, Sarah; Deeb, Mary E; Messersmith, Lisa J

2012-01-01

The role of confessionalism in the Lebanese healthcare sector, especially since the resolution of the Lebanese civil war (1975-1990), has yet to discussed at length in reproductive health research. Using biopolitical and structural violence models to describe how community leaders in two low-income neighbourhoods in Beirut describe reproductive healthcare - specifically through judgments of perceived sect size vis-à-vis perceived use of birth control measures - this paper attempts to provide critical analysis of the state of reproductive health in this setting. By using a theoretical model of analysis, which we refer to as the political anatomy of reproduction, we hope to unmask how confessionalism is perpetuated through discussions of reproductive health and how public health and medical communities can challenge this technique of power.

A review on management of spent lithium ion batteries and strategy for resource recycling of all components from them.

PubMed

Zhang, Wenxuan; Xu, Chengjian; He, Wenzhi; Li, Guangming; Huang, Juwen

2018-02-01

The wide use of lithium ion batteries (LIBs) has brought great numbers of discarded LIBs, which has become a common problem facing the world. In view of the deleterious effects of spent LIBs on the environment and the contained valuable materials that can be reused, much effort in many countries has been made to manage waste LIBs, and many technologies have been developed to recycle waste LIBs and eliminate environmental risks. As a review article, this paper introduces the situation of waste LIB management in some developed countries and in China, and reviews separation technologies of electrode components and refining technologies of LiCoO 2 and graphite. Based on the analysis of these recycling technologies and the structure and components characteristics of the whole LIB, this paper presents a recycling strategy for all components from obsolete LIBs, including discharge, dismantling, and classification, separation of electrode components and refining of LiCoO 2 /graphite. This paper is intended to provide a valuable reference for the management, scientific research, and industrial implementation on spent LIBs recycling, to recycle all valuable components and reduce the environmental pollution, so as to realize the win-win situation of economic and environmental benefits.

Photonics technology development for optical fuzing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, J.J.; Geib, Kent Martin; von der Lippe, C.M.

2005-07-01

This paper describes the photonic component development, which exploits pioneering work and unique expertise at Sandia National Laboratories, ARDEC and the Army Research Laboratory by combining key optoelectronic technologies to design and demonstrate components for this fuzing application. The technologies under investigation for the optical fuze design covered in this paper are vertical cavity surface emitting lasers (VECSELs), integrated resonant cavity photodetectors (RCPD), and diffractive micro-optics. The culmination of this work will be low cost, robust, fully integrated, g-hardened components designed suitable for proximity fuzing applications. The use of advanced photonic components will enable replacement of costly assemblies that employmore » discrete lasers, photodetectors, and bulk optics. The integrated devices will be mass produced and impart huge savings for a variety of Army applications.« less

Foam core shield (FCS) systems : a new dual - purpose technology for shielding against meteoroid strike damage and for thermal control of spacecrafts/satellite components

NASA Technical Reports Server (NTRS)

Adams, Marc A.; Zwissler, James G.; Hayes, Charles; Fabensky, Beth; Cornelison, Charles; Alexander, Lesley; Bishop, Karen

2005-01-01

A new technology is being developed that can protect spacecraft and satellite components against damage from meteoroid strikes and control the thermal environment of the protected components. This technology, called Foam Core Shield (FCS) systems, has the potential to replace the multi-layer insulation blankets (MLI) that have been used on spacecraft for decades. In order to be an attractive candidate for replacing MLI, FCS systems should not only provide superior protection against meteoroid strikes but also provide an equal or superior ability to control the temperature of the protected component. Properly designed FCS systems can provide these principal functions, meteoroid strike protection and thermal control, with lower system mass and a smaller system envelope than ML.

Applications of statistical physics to technology price evolution

NASA Astrophysics Data System (ADS)

McNerney, James

Understanding how changing technology affects the prices of goods is a problem with both rich phenomenology and important policy consequences. Using methods from statistical physics, I model technology-driven price evolution. First, I examine a model for the price evolution of individual technologies. The price of a good often follows a power law equation when plotted against its cumulative production. This observation turns out to have significant consequences for technology policy aimed at mitigating climate change, where technologies are needed that achieve low carbon emissions at low cost. However, no theory adequately explains why technology prices follow power laws. To understand this behavior, I simplify an existing model that treats technologies as machines composed of interacting components. I find that the power law exponent of the price trajectory is inversely related to the number of interactions per component. I extend the model to allow for more realistic component interactions and make a testable prediction. Next, I conduct a case-study on the cost evolution of coal-fired electricity. I derive the cost in terms of various physical and economic components. The results suggest that commodities and technologies fall into distinct classes of price models, with commodities following martingales, and technologies following exponentials in time or power laws in cumulative production. I then examine the network of money flows between industries. This work is a precursor to studying the simultaneous evolution of multiple technologies. Economies resemble large machines, with different industries acting as interacting components with specialized functions. To begin studying the structure of these machines, I examine 20 economies with an emphasis on finding common features to serve as targets for statistical physics models. I find they share the same money flow and industry size distributions. I apply methods from statistical physics to show that industries cluster the same way according to industry type. Finally, I use these industry money flows to model the price evolution of many goods simultaneously, where network effects become important. I derive a prediction for which goods tend to improve most rapidly. The fastest-improving goods are those with the highest mean path lengths in the money flow network.

78 FR 16296 - Certain Optoelectronic Devices for Fiber Optic Communications, Components Thereof, and Products...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

... Technologies'') to amend the complaint and notice of investigation (``NOI''). FOR FURTHER INFORMATION CONTACT... Fiber Optic Communications, Components Thereof, and Products Containing Same; Commission Determination Not To Review an Initial Determination Granting Complainants Avago Technologies General IP (Singapore...

Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

NASA Technical Reports Server (NTRS)

Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

1996-01-01

This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

Annual Science and Engineering Technology Conference Presentations (8th)

DTIC Science & Technology

2007-04-19

Technology 11:30 am Wrap Up & Adjourn 12:00 pm BUFFET LUNCHEON Session III: Army Future Combat System (Brigade Combat Team) (FCS(BCT)) Program The Future...acquisitions by firms from other nations. Non UK/Canada transactions accounted for 58% of all CFIUS filings. 19 Outline • Industrial Policy • Emerging...requirements are accounted for Document and model the component Minimize inter-component dependencies Support rapid, affordable technology

Electrical/electronics working group summary

NASA Technical Reports Server (NTRS)

Schoenfeld, A. D.

1984-01-01

The electrical/electronics, technology area was considered. It was found that there are no foreseeable circuit or component problems to hinder the implementation of the flywheel energy storage concept. The definition of the major component or technology developments required to permit a technology ready date of 1987 was addressed. Recommendations: motor/generators, suspension electronics, power transfer, power conditioning and distribution, and modeling. An introduction to the area of system engineering is also included.

Alternative Solvents and Technologies for Precision Cleaning of Aerospace Components

NASA Technical Reports Server (NTRS)

Grandelli, Heather; Maloney, Phillip; DeVor, Robert; Hintze, Paul

2014-01-01

Precision cleaning solvents for aerospace components and oxygen fuel systems, including currently used Vertrel-MCA, have a negative environmental legacy, high global warming potential, and have polluted cleaning sites. Thus, alternative solvents and technologies are being investigated with the aim of achieving precision contamination levels of less than 1 mg/sq ft. The technologies being evaluated are ultrasonic bath cleaning, plasma cleaning and supercritical carbon dioxide cleaning.

Noncontacting measurement technologies for space propulsion condition monitoring

NASA Technical Reports Server (NTRS)

Randall, M. R.; Barkhoudarian, S.; Collins, J. J.; Schwartzbart, A.

1987-01-01

This paper describes four noncontacting measurement technologies that can be used in a turbopump condition monitoring system. The isotope wear analyzer, fiberoptic deflectometer, brushless torque-meter, and fiberoptic pyrometer can be used to monitor component wear, bearing degradation, instantaneous shaft torque, and turbine blade cracking, respectively. A complete turbopump condition monitoring system including these four technologies could predict remaining component life, thus reducing engine operating costs and increasing reliability.

Spaceborne sensors (1983-2000 AD): A forecast of technology

NASA Technical Reports Server (NTRS)

Kostiuk, T.; Clark, B. P.

1984-01-01

A technical review and forecast of space technology as it applies to spaceborne sensors for future NASA missions is presented. A format for categorization of sensor systems covering the entire electromagnetic spectrum, including particles and fields is developed. Major generic sensor systems are related to their subsystems, components, and to basic research and development. General supporting technologies such as cryogenics, optical design, and data processing electronics are addressed where appropriate. The dependence of many classes of instruments on common components, basic R&D and support technologies is also illustrated. A forecast of important system designs and instrument and component performance parameters is provided for the 1983-2000 AD time frame. Some insight into the scientific and applications capabilities and goals of the sensor systems is also given.

The eradication of smallpox: organizational learning and innovation in international health administration.

PubMed

Hopkins, J W

1988-04-01

The WHO smallpox eradication campaign represents perhaps the best example of a successful international health administration. In the 1st year of the campaign (1967), the guiding strategy was to vaccinate people en masse over a 2-3 year period in countries where smallpox was epidemic thereby conquering the disease. In Western Nigeria where 90% of the population had been vaccinated, a smallpox outbreak occurred in a religious sect resisting vaccinations and a delay in delivery of supplies forced a change in strategy. Campaign staff learned to rapidly isolate infected persons and swiftly vaccinate the uninfected in an outbreak area in order to break the transmission of smallpox, even where 1/2 the population had been vaccinated. Technological advancements also contributed to the campaign's success. For example, the jet injector vaccinated 1000 people/hour with efficient, reliable, mass produced potent, stable freeze dried vaccines (often produced in target countries) or the less costly and virtually maintenance free bifurcated needle was used. The most significant contribution to the success of the campaign, however, was the flexible mode of management adopted by the campaign staff at WHO which provided an appropriate environment for organizational learning and innovation. Although management was open and flexible, the campaign did depend on careful planning and setting of goals, continual assessment, and rapid response to field requests for assistance or advice. Trends in the incidence of smallpox was chosen as the indicator of success as opposed to the number of vaccinations. The campaign demonstrated the need for cultural adaptations as it operated in each country and region. This evaluation of the success of the smallpox campaign presents conclusions that serve as guidelines to the organization and administration of international programs designed to solve other health problems.

Total Life Cycle-Based Materials Selection for Polymer Metal Hybrid Body-in-White Automotive Components

NASA Astrophysics Data System (ADS)

Grujicic, M.; Sellappan, V.; He, T.; Seyr, Norbert; Obieglo, Andreas; Erdmann, Marc; Holzleitner, Jochen

2009-03-01

Over the last dozen of years, polymer metal hybrid (PMH) technologies have established themselves as viable alternatives for use in light-weight automotive body-in-white bolt-on as well as load-bearing (structural) components. Within the PMH technologies, sheet-metal stamped/formed and thermoplastic injection molding subcomponents are integrated into a singular component/module. Due to attending synergetic effects, the performance of the PMH component typically exceeds that attainable by an alternative single-material technologies. In the present work, a total life cycle (TLC) approach to the selection of metallic and thermoplastic materials (as well as the selection of structural adhesives, where appropriate) is considered. The TLC material selection approach considers the consequences and ramifications of material selection at each major stage of the vehicle manufacturing process chain (press shop, injection molding shop, body shop, paint shop, and assembly), as well as relation to the vehicle performance, durability and the end-of-the-life-of-the-vehicle considerations. The approach is next applied to the case of injection overmolding technology to identify the optimal grade of short glass-fiber reinforced nylon when used in a prototypical PMH load-bearing automotive body-in-white component.

Role of design complexity in technology improvement.

PubMed

McNerney, James; Farmer, J Doyne; Redner, Sidney; Trancik, Jessika E

2011-05-31

We study a simple model for the evolution of the cost (or more generally the performance) of a technology or production process. The technology can be decomposed into n components, each of which interacts with a cluster of d - 1 other components. Innovation occurs through a series of trial-and-error events, each of which consists of randomly changing the cost of each component in a cluster, and accepting the changes only if the total cost of the cluster is lowered. We show that the relationship between the cost of the whole technology and the number of innovation attempts is asymptotically a power law, matching the functional form often observed for empirical data. The exponent α of the power law depends on the intrinsic difficulty of finding better components, and on what we term the design complexity: the more complex the design, the slower the rate of improvement. Letting d as defined above be the connectivity, in the special case in which the connectivity is constant, the design complexity is simply the connectivity. When the connectivity varies, bottlenecks can arise in which a few components limit progress. In this case the design complexity depends on the details of the design. The number of bottlenecks also determines whether progress is steady, or whether there are periods of stasis punctuated by occasional large changes. Our model connects the engineering properties of a design to historical studies of technology improvement.

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: INNOVATION MAKING A DIFFERENCE

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program encourages commercialization of innovative technologies for characterizing and remediating hazardous waste site contamination through four components: Demonstration, Emerging Technology, and Monitoring & Measurement Pr...

Embedded 100 Gbps Photonic Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuznia, Charlie

This innovation to fiber optic component technology increases the performance, reduces the size and reduces the power consumption of optical communications within dense network systems, such as advanced distributed computing systems and data centers. VCSEL technology is enabling short-reach (< 100 m) and >100 Gbps optical interconnections over multi-mode fiber in commercial applications.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1994-01-01

Reports technical effort by AlliedSignal Engines in sixth year of DOE/NASA funded project. Topics include: gas turbine engine design modifications of production APU to incorporate ceramic components; fabrication and processing of silicon nitride blades and nozzles; component and engine testing; and refinement and development of critical ceramics technologies, including: hot corrosion testing and environmental life predictive model; advanced NDE methods for internal flaws in ceramic components; and improved carbon pulverization modeling during impact. ATTAP project is oriented toward developing high-risk technology of ceramic structural component design and fabrication to carry forward to commercial production by 'bridging the gap' between structural ceramics in the laboratory and near-term commercial heat engine application. Current ATTAP project goal is to support accelerated commercialization of advanced, high-temperature engines for hybrid vehicles and other applications. Project objectives are to provide essential and substantial early field experience demonstrating ceramic component reliability and durability in modified, available, gas turbine engine applications; and to scale-up and improve manufacturing processes of ceramic turbine engine components and demonstrate application of these processes in the production environment.

Component improvement of free-piston Stirling engine key technology for space power

NASA Technical Reports Server (NTRS)

Alger, Donald L.

1988-01-01

The successful performance of the 25 kW Space Power Demonstrator (SPD) engine during an extensive testing period has provided a baseline of free piston Stirling engine technology from which future space Stirling engines may evolve. Much of the success of the engine was due to the initial careful selection of engine materials, fabrication and joining processes, and inspection procedures. Resolution of the few SPD engine problem areas that did occur has resulted in the technological advancement of certain key free piston Stirling engine components. Derivation of two half-SPD, single piston engines from the axially opposed piston SPD engine, designated as Space Power Research (SPR) engines, has made possible the continued improvement of these engine components. The two SPR engines serve as test bed engines for testing of engine components. Some important fabrication and joining processes are reviewed. Also, some component deficiencies that were discovered during SPD engine testing are described and approaches that were taken to correct these deficiencies are discussed. Potential component design modifications, based upon the SPD and SPR engine testing, are also reported.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1993-01-01

The Advanced Turbine Technologies Application Project (ATTAP) is in the fifth year of a multiyear development program to bring the automotive gas turbine engine to a state at which industry can make commercialization decisions. Activities during the past year included reference powertrain design updates, test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, ceramic component rig testing, and test-bed engine fabrication and testing. Engine design and development included mechanical design, combustion system development, alternate aerodynamic flow testing, and controls development. Design activities included development of the ceramic gasifier turbine static structure, the ceramic gasifier rotor, and the ceramic power turbine rotor. Material characterization efforts included the testing and evaluation of five candidate high temperature ceramic materials. Ceramic component process development and fabrication, with the objective of approaching automotive volumes and costs, continued for the gasifier turbine rotor, gasifier turbine scroll, extruded regenerator disks, and thermal insulation. Engine and rig fabrication, testing, and development supported improvements in ceramic component technology. Total test time in 1992 amounted to 599 hours, of which 147 hours were engine testing and 452 were hot rig testing.

Design, Fabrication and Characterization of High Temperature Joints in Ceramic Composites

NASA Technical Reports Server (NTRS)

Singh, M.

1999-01-01

Ceramic joining has been recognized as one of the enabling technologies for the successful utilization of ceramic components in a number of demanding, high temperature applications. Various joint design philosophies and design issues have been discussed along with an affordable, robust ceramic joining technology (ARCJoinT). A wide variety of silicon carbide-based composite materials, in different shapes and sizes, have been joined using this technology. This technique is capable of producing joints with tailorable thickness and composition. The room and high temperature mechanical properties and fractography of ceramic joints have been reported. These joints maintain their mechanical strength up to 1200 C in air. This technology is suitable for the joining of large and complex shaped ceramic composite components and with certain modifications, can be applied to repair of ceramic components damaged in service.

Design, Fabrication, and Characterization of High Temperature Joints in Ceramic Composites

NASA Technical Reports Server (NTRS)

Singh, M.

1999-01-01

Ceramic joining has been recognized as one of the enabling technologies for the successful utilization of ceramic components in a number of demanding, high temperature applications. Various joint design philosophies and design issues have been discussed along with an affordable, robust ceramic joining technology (ARCJoinT). A wide variety of silicon carbide-based composite materials, in different shapes and sizes, have been joined using this technology. This technique is capable of producing joints with tailorable thickness and composition. The room and high temperature mechanical properties and fractography of ceramic joints have been reported. These joints maintain their mechanical strength up to 1200C in air. This technology is suitable for the joining of large and complex shaped ceramic composite components and with certain modifications, can be applied to repair of ceramic components damaged in service.

Sizing Power Components of an Electrically Driven Tail Cone Thruster and a Range Extender

NASA Technical Reports Server (NTRS)

Jansen, Ralph H.; Bowman, Cheryl; Jankovsky, Amy

2016-01-01

The aeronautics industry has been challenged on many fronts to increase efficiency, reduce emissions, and decrease dependency on carbon-based fuels. This paper provides an overview of the turboelectric and hybrid electric technologies being developed under NASA's Advanced Air Transportation Technology (AATT) Project and discusses how these technologies can impact vehicle design. The discussion includes an overview of key hybrid electric studies and technology investments, the approach to making informed investment decisions based on key performance parameters and mission studies, and the power system architectures for two candidate aircraft. Finally, the power components for a single-aisle turboelectric aircraft with an electrically driven tail cone thruster and for a hybrid-electric nine-passenger aircraft with a range extender are parametrically sized, and the sensitivity of these components to key parameters is presented.

Revealing Optical Components

NASA Technical Reports Server (NTRS)

2002-01-01

The Optical Vector Analyzer (OVA) 1550 significantly reduces the time and cost of testing sophisticated optical components. The technology grew from the research Luna Technologies' Dr. Mark Froggatt conducted on optical fiber strain measurement while working at Langley Research Center. Dr. Froggatt originally developed the technology for non- destructive evaluation testing at Langley. The new technique can provide 10,000 independent strain measurements while adding less than 10 grams to the weight of the vehicle. The OVA is capable of complete linear characterization of single-mode optical components used in high- bit-rate applications. The device can test most components over their full range in less than 30 seconds, compared to the more than 20 minutes required by other testing methods. The dramatically shortened measurement time results in increased efficiency in final acceptance tests of optical devices, and the comprehensive data produced by the instrument adds considerable value for component consumers. The device eliminates manufacturing bottlenecks, while reducing labor costs and wasted materials during production.

Two Rotor Stratified Charge Rotary Engine (SCRE) Engine System Technology Evaluation

NASA Technical Reports Server (NTRS)

Hoffman, T.; Mack, J.; Mount, R.

1994-01-01

This report summarizes results of an evaluation of technology enablement component technologies as integrated into a two rotor Stratified Charge Rotary Engine (SCRE). The work constitutes a demonstration of two rotor engine system technology, utilizing upgraded and refined component technologies derived from prior NASA Contracts NAS3-25945, NAS3-24628 and NAS-23056. Technical objectives included definition of, procurement and assembly of an advanced two rotor core aircraft engine, operation with Jet-A fuel at Take-Off rating of 340 BHP (254kW) and operation at a maximum cruise condition of 255 BHP (190kW), 75% cruise. A fuel consumption objective of 0.435 LBS/BHP-Hr (265 GRS/kW-Hr) was identified for the maximum cruise condition. A critical technology component item, a high speed, unit injector fuel injection system with electronic control was defined, procured and tested in conjunction with this effort. The two rotor engine configuration established herein defines an affordable, advanced, Jet-A fuel capability core engine (not including reduction gear, propeller shaft and some aircraft accessories) for General Aviation of the mid-1990's and beyond.

Study of multi-megawatt technology needs for photovoltaic space power systems, volume 2

NASA Technical Reports Server (NTRS)

Peterson, D. M.; Pleasant, R. L.

1981-01-01

Possible missions requiring multimegawatt photovoltaic space power systems in the 1990's time frame and power system technology needs associated with these missions are examined. Four specific task areas were considered: (1) missions requiring power in the 1-10 megawatt average power region; (2) alternative power systems and component technologies; (3) technology goals and sensitivity trades and analyses; and (4) technology recommendations. Specific concepts for photovoltaic power approaches considered were: planar arrays, concentrating arrays, hybrid systems using Rankine engines, thermophotovoltaic approaches; all with various photovoltaic cell component technologies. Various AC/DC power management approaches, and battery, fuel cell, and flywheel energy storage concepts are evaluated. Interactions with the electrical ion engine injection and stationkeeping system are also considered.

From advanced driver assistance to autonomous driving: perspectives for photonics sensors

NASA Astrophysics Data System (ADS)

Cochard, Jacques; Bouyé, Clémentine

2016-03-01

Optics components entered in the automotive vehicle one century ago with headlamps and since then move towards even more sophisticated designs in lighting functions. Photonics sensors are just entering now in this market through driver assistance, in complement of incumbent ultrasonic and radar technologies. Gain of market shares is expected for this components with autonomous driving, that was few years ago a nice dream and whose early results exceed surprisingly expectations of roadmaps and historic OEM have quickly joined the course launched by Google Company 5 years ago. Technological components, among them CMOS camera followed by Laser Scanners, cost-effective flash LIDAR are already experimenting their first miles in real condition and new consumers in South Asia plebiscite this new way to drive cars .The issue is still for photonics companies to move from well suited technological solution to mass-production components with corresponding cost reduction. MEMS components that follow the same curve 15 years ago (with market entries in airbags, tire pressure monitoring systems…) experimented the hard pressure on price for wide market adoption. Besides price, which is a CFO issue, photonic technologies will keep in place if they can both reassure OEM CEO and let CTO and designers dream. Reassurance will be through higher level of standardization and reliability of these components whereas dream will be linked to innovative sensing application, e.g spectroscopy.

Development and demonstration of manufacturing processes for fabricating graphite/LARC 160 polyimide structural elements

NASA Technical Reports Server (NTRS)

Frost, R. K.; Jones, J. S.; Dynes, P. J.; Wykes, D. H.

1981-01-01

The development and demonstration of manufacturing technologies for the structural application of Celion graphite/LARC-160 polyimide composite material is discussed. Process development and fabrication of demonstration components are discussed. Process development included establishing quality assurance of the basic composite material and processing, nondestructive inspection of fabricated components, developing processes for specific structural forms, and qualification of processes through mechanical testing. Demonstration components were fabricated. The demonstration components consisted of flat laminates, skin/stringer panels, honeycomb panels, chopped fiber compression moldings, and a technology demonstrator segment (TDS) representative of the space shuttle aft body flap.

A Practical Approach to Starting Fission Surface Power Development

NASA Technical Reports Server (NTRS)

Mason, Lee S.

2006-01-01

The Prometheus Power and Propulsion Program has been reformulated to address NASA needs relative to lunar and Mars exploration. Emphasis has switched from the Jupiter Icy Moons Orbiter (JIMO) flight system development to more generalized technology development addressing Fission Surface Power (FSP) and Nuclear Thermal Propulsion (NTP). Current NASA budget priorities and the deferred mission need date for nuclear systems prohibit a fully funded reactor Flight Development Program. However, a modestly funded Advanced Technology Program can and should be conducted to reduce the risk and cost of future flight systems. A potential roadmap for FSP technology development leading to possible flight applications could include three elements: 1) Conceptual Design Studies, 2) Advanced Component Technology, and 3) Non-Nuclear System Testing. The Conceptual Design Studies would expand on recent NASA and DOE analyses while increasing the depth of study in areas of greatest uncertainty such as reactor integration and human-rated shielding. The Advanced Component Technology element would address the major technology risks through development and testing of reactor fuels, structural materials, primary loop components, shielding, power conversion, heat rejection, and power management and distribution (PMAD). The Non-Nuclear System Testing would provide a modular, technology testbed to investigate and resolve system integration issues.

Assessment of Technologies for Noncryogenic Hybrid Electric Propulsion

NASA Technical Reports Server (NTRS)

Dever, Timothy P.; Duffy, Kirsten P.; Provenza, Andrew J.; Loyselle, Patricia L.; Choi, Benjamin B.; Morrison, Carlos R.; Lowe, Angela M.

2015-01-01

The Subsonic Fixed Wing Project of NASA's Fundamental Aeronautics Program is researching aircraft propulsion technologies that will lower noise, emissions, and fuel burn. One promising technology is noncryogenic electric propulsion, which could be either hybrid electric propulsion or turboelectric propulsion. Reducing dependence on the turbine engine would certainly reduce emissions. However, the weight of the electricmotor- related components that would have to be added would adversely impact the benefits of the smaller turbine engine. Therefore, research needs to be done to improve component efficiencies and reduce component weights. This study projects technology improvements expected in the next 15 and 30 years, including motor-related technologies, power electronics, and energy-storage-related technologies. Motor efficiency and power density could be increased through the use of better conductors, insulators, magnets, bearings, structural materials, and thermal management. Energy storage could be accomplished through batteries, flywheels, or supercapacitors, all of which expect significant energy density growth over the next few decades. A first-order approximation of the cumulative effect of each technology improvement shows that motor power density could be improved from 3 hp/lb, the state of the art, to 8 hp/lb in 15 years and 16 hp/lb in 30 years.

Energy harvesting concepts for small electric unmanned systems

NASA Astrophysics Data System (ADS)

Qidwai, Muhammad A.; Thomas, James P.; Kellogg, James C.; Baucom, Jared N.

2004-07-01

In this study, we identify and survey energy harvesting technologies for small electrically powered unmanned systems designed for long-term (>1 day) time-on-station missions. An environmental energy harvesting scheme will provide long-term, energy additions to the on-board energy source. We have identified four technologies that cover a broad array of available energy sources: solar, kinetic (wind) flow, autophagous structure-power (both combustible and metal air-battery systems) and electromagnetic (EM) energy scavenging. We present existing conceptual designs, critical system components, performance, constraints and state-of-readiness for each technology. We have concluded that the solar and autophagous technologies are relatively matured for small-scale applications and are capable of moderate power output levels (>1 W). We have identified key components and possible multifunctionalities in each technology. The kinetic flow and EM energy scavenging technologies will require more in-depth study before they can be considered for implementation. We have also realized that all of the harvesting systems require design and integration of various electrical, mechanical and chemical components, which will require modeling and optimization using hybrid mechatronics-circuit simulation tools. This study provides a starting point for detailed investigation into the proposed technologies for unmanned system applications under current development.

The Dairy Technology System in Venezuela. Summary of Research 79.

ERIC Educational Resources Information Center

Nieto, Ruben D.; Henderson, Janet L.

A study examined the agricultural technology system in Venezuela with emphasis on the dairy industry. An analytical framework was used to identify the strengths and weaknesses of the following components of Venezuela's agricultural technology system: policy, technology development, technology transfer, and technology use. Selected government…

Advanced Gas Turbine (AGT) Technology Development Project, ceramic component developments

NASA Technical Reports Server (NTRS)

Teneyck, M. O.; Macbeth, J. W.; Sweeting, T. B.

1987-01-01

The ceramic component technology development activity conducted by Standard Oil Engineered Materials Company while performing as a principal subcontractor to the Garrett Auxiliary Power Division for the Advanced Gas Turbine (AGT) Technology Development Project (NASA Contract DEN3-167) is summarized. The report covers the period October 1979 through July 1987, and includes information concerning ceramic technology work categorized as common and unique. The former pertains to ceramic development applicable to two parallel AGT projects established by NASA contracts DEN3-168 (AGT100) and DEN3-167 (AGT101), whereas the unique work solely pertains to Garrett directed activity under the latter contract. The AGT101 Technology Development Project is sponsored by DOE and administered by NASA-Lewis. Standard Oil directed its efforts toward the development of ceramic materials in the silicon-carbide family. Various shape forming and fabrication methods, and nondestructive evaluation techniques were explored to produce the static structural components for the ceramic engine. This permitted engine testing to proceed without program slippage.

Power management and distribution technology

NASA Astrophysics Data System (ADS)

Dickman, John Ellis

Power management and distribution (PMAD) technology is discussed in the context of developing working systems for a piloted Mars nuclear electric propulsion (NEP) vehicle. The discussion is presented in vugraph form. The following topics are covered: applications and systems definitions; high performance components; the Civilian Space Technology Initiative (CSTI) high capacity power program; fiber optic sensors for power diagnostics; high temperature power electronics; 200 C baseplate electronics; high temperature component characterization; a high temperature coaxial transformer; and a silicon carbide mosfet.

Power management and distribution technology

NASA Technical Reports Server (NTRS)

Dickman, John Ellis

1993-01-01

Power management and distribution (PMAD) technology is discussed in the context of developing working systems for a piloted Mars nuclear electric propulsion (NEP) vehicle. The discussion is presented in vugraph form. The following topics are covered: applications and systems definitions; high performance components; the Civilian Space Technology Initiative (CSTI) high capacity power program; fiber optic sensors for power diagnostics; high temperature power electronics; 200 C baseplate electronics; high temperature component characterization; a high temperature coaxial transformer; and a silicon carbide mosfet.

Materials technology assessment for stirling engines

NASA Technical Reports Server (NTRS)

Stephens, J. R.; Witzke, W. R.; Watson, G. K.; Johnston, J. R.; Croft, W. J.

1977-01-01

A materials technology assessment of high temperature components in the improved (metal) and advanced (ceramic) Stirling engines was undertaken to evaluate the current state-of-the-art of metals and ceramics, identify materials research and development required to support the development of automotive Stirling engines, and to recommend materials technology programs to assure material readiness concurrent with engine system development programs. The most critical component for each engine is identified and some of the material problem areas are discussed.

Dual use of photonic components in radiation environments

NASA Astrophysics Data System (ADS)

Taylor, Edward W.

1994-06-01

The steady evolution of and increased requirement for using photonic technologies within the commercial market coupled with decreased defense spending has brought forth new national philosophies regarding widespread use of the technology in both military and commercial sectors. Many commercially available photonic components (i.e., optical fibers, laser diodes, semiconductor detectors, detector arrays, spatial light modulators, integrated optic circuitry and other similar optoelectronic and electro-optic devices are being scrutinized for utility, cost effectiveness and dual-use in a variety of applications. One important area of application is space. This paper will discuss the current state-of-the-art and utility of qualifying and using several mature photonic component technologies in commercial and defense application areas.

Technological Alternatives to Paper-Based Components of Team-Based Learning

ERIC Educational Resources Information Center

Robinson, Daniel H.; Walker, Joshua D.

2008-01-01

The authors have been using components of team-based learning (TBL) in two undergraduate courses at the University of Texas for several years: an educational psychology survey course--Cognition, Human Learning and Motivation--and Introduction to Statistics. In this chapter, they describe how they used technology in classes of fifty to seventy…

Laser rapid forming technology of high-performance dense metal components with complex structure

NASA Astrophysics Data System (ADS)

Huang, Weidong; Chen, Jing; Li, Yanming; Lin, Xin

2005-01-01

Laser rapid forming (LRF) is a new and advanced manufacturing technology that has been developed on the basis of combining high power laser cladding technology with rapid prototyping (RP) to realize net shape forming of high performance dense metal components without dies. Recently we have developed a set of LRF equipment. LRF experiments were carried out on the equipment to investigate the influences of processing parameters on forming characterizations systematically with the cladding powder materials as titanium alloys, superalloys, stainless steel, and copper alloys. The microstructure of laser formed components is made up of columnar grains or columnar dendrites which grow epitaxially from the substrate since the solid components were prepared layer by layer additionally. The result of mechanical testing proved that the mechanical properties of laser formed samples are similar to or even over that of forging and much better than that of casting. It is shown in this paper that LRF technology is providing a new solution for some difficult processing problems in the high tech field of aviation, spaceflight and automobile industries.

Changing Technology and Work: Northern Telecom. CAW Technology Project.

ERIC Educational Resources Information Center

Robertson, David; Wareham, Jeff

A project to examine the implications of technological change at Northern Telecom consisted of two major components: a technological survey and case study research. A questionnaire that contained more than 90 questions on technological change was distributed through local union technology committee meetings in Brampton, London, Belleville, and…

Ultralightweight optics for space applications

NASA Astrophysics Data System (ADS)

Mayo, James W.; DeHainaut, Linda L.; Bell, Kevin D.; Smith, Winfred S.; Killpatrick, Don H.; Dyer, Richard W.

2000-07-01

Lightweight, deployable space optics has been identified as a key technology for future cost-effective, space-based systems. The United States Department of Defense has partnered with the National Aeronautical Space Administration to implement a space mirror technology development activity known as the Advanced Mirror System Demonstrator (AMSD). The AMSD objectives are to advance technology in the production of low-mass primary mirror systems, reduce mirror system cost and shorten mirror- manufacturing time. The AMSD program will offer substantial weight, cost and production rate improvements over Hubble Space Telescope mirror technology. A brief history of optical component development and a review of optical component state-of-the-art technology will be given, and the AMSD program will be reviewed.

Supporting learner-centered technology integration through situated mentoring

NASA Astrophysics Data System (ADS)

Rosenberg, Marian Goode

Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

VERIFICATION OF HIGH-RATE DISINFECTION TECHNOLOGIES FOR WET-WEATHER FLOWS

EPA Science Inventory

This paper describes the critical components of the USEPA's Environmental Technology Verification Program for two specific technologies categories: ultraviolet disinfection technologies for treating combined sewer overflow (CSO) and sanitary sewer overflow (SSO), and; induction m...

Study of advanced techniques for determining the long-term performance of components

NASA Technical Reports Server (NTRS)

1972-01-01

A study was conducted of techniques having the capability of determining the performance and reliability of components for spacecraft liquid propulsion applications for long term missions. The study utilized two major approaches; improvement in the existing technology, and the evolution of new technology. The criteria established and methods evolved are applicable to valve components. Primary emphasis was placed on the propellants oxygen difluoride and diborane combination. The investigation included analysis, fabrication, and tests of experimental equipment to provide data and performance criteria.

New dynamic silicon photonic components enabled by MEMS technology

NASA Astrophysics Data System (ADS)

Errando-Herranz, Carlos; Edinger, Pierre; Colangelo, Marco; Björk, Joel; Ahmed, Samy; Stemme, Göran; Niklaus, Frank; Gylfason, Kristinn B.

2018-02-01

Silicon photonics is the study and application of integrated optical systems which use silicon as an optical medium, usually by confining light in optical waveguides etched into the surface of silicon-on-insulator (SOI) wafers. The term microelectromechanical systems (MEMS) refers to the technology of mechanics on the microscale actuated by electrostatic actuators. Due to the low power requirements of electrostatic actuation, MEMS components are very power efficient, making them well suited for dense integration and mobile operation. MEMS components are conventionally also implemented in silicon, and MEMS sensors such as accelerometers, gyros, and microphones are now standard in every smartphone. By combining these two successful technologies, new active photonic components with extremely low power consumption can be made. We discuss our recent experimental work on tunable filters, tunable fiber-to-chip couplers, and dynamic waveguide dispersion tuning, enabled by the marriage of silicon MEMS and silicon photonics.

Electronic and crystal structure of NiTi martensite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanati, M.; Albers, R.C.; Pinski, F.J.

1998-11-01

All of the first-principles electronic-structure calculations for the martensitic structure of NiTi have used the experimental atomic parameters reported by Michal and Sinclair [Acta Crystallogr., Sect. B: Struct. Crystallogr. Cryst. Chem. {bold B37}, 1803 (1981)]. We have used first-principles, full-potential, linear muffin-tin orbital calculations to examine the total energy of all the experimental martensitic structures reported in the literature. We find that another crystal structure, that of Kudoh {ital et al.} [Acta Metall. Mater. {bold 33}, 2049 (1985)], has the lowest total energy at zero temperature. Ground-state and formation energies were calculated for all of the experimental structures. Total andmore » local densities of states were calculated and compared with each other for the structures of both Kudoh {ital et al.} and Michal and Sinclair thinsp {copyright} {ital 1998} {ital The American Physical Society}« less

Ayahuasca in adolescence: a preliminary psychiatric assessment.

PubMed

Da Silveira, Dartiu Xavier; Grob, Charles S; de Rios, Marlene Dobkin; Lopez, Enrique; Alonso, Luisa K; Tacla, Cristiane; Doering-Silveira, Evelyn

2005-06-01

Ayahuasca is believed to be harmless for those (including adolescents) drinking it within a religious setting. Nevertheless controlled studies on the mental/ psychiatric status of ritual hallucinogenic ayahuasca concoction consumers are still lacking. In this study, 40 adolescents from a Brazilian ayahuasca sect were compared with 40 controls matched on sex, age, and educational background for psychiatric symptomatology. Screening scales for depression, anxiety, alcohol consumption patterns (abuse), attentional problems, and body dysmorphic disorders were used. It was found that, compared to controls, considerable lower frequencies of positive scoring for anxiety, body dismorphism, and attentional problems were detected among ayahuasca-using adolescents despite overall similar psychopathological profiles displayed by both study groups. Low frequencies of psychiatric symptoms detected among adolescents consuming ayahuasca within a religious context may reflect a protective effect due to their religious affiliation. However further studies on the possible interference of other variables in the outcome are necessary.

On the error in the nucleus-centered multipolar expansion of molecular electron density and its topology: A direct-space computational study.

PubMed

Michael, J Robert; Koritsanszky, Tibor

2017-05-28

The convergence of nucleus-centered multipolar expansion of the quantum-chemical electron density (QC-ED), gradient, and Laplacian is investigated in terms of numerical radial functions derived by projecting stockholder atoms onto real spherical harmonics at each center. The partial sums of this exact one-center expansion are compared with the corresponding Hansen-Coppens pseudoatom (HC-PA) formalism [Hansen, N. K. and Coppens, P., "Testing aspherical atom refinements on small-molecule data sets," Acta Crystallogr., Sect. A 34, 909-921 (1978)] commonly utilized in experimental electron density studies. It is found that the latter model, due to its inadequate radial part, lacks pointwise convergence and fails to reproduce the local topology of the target QC-ED even at a high-order expansion. The significance of the quantitative agreement often found between HC-PA-based (quadrupolar-level) experimental and extended-basis QC-EDs can thus be challenged.

Measurement of elastic φ photoproduction at HERA

NASA Astrophysics Data System (ADS)

Derrick, M.; Krakauer, D.; Magill, S.; Mikunas, D.; Musgrave, B.; Okrasinski, J. R.; Repond, J.; Stanek, R.; Talaga, R. L.; Zhang, H.; Mattingly, M. C. K.; Bari, G.; Basile, M.; Bellagamba, L.; Boscherini, D.; Bruni, A.; Bruni, G.; Bruni, P.; Cara Romeo, G.; Castellini, G.; Cifarelli, L.; Cindolo, F.; Contin, A.; Corradi, M.; Gialas, I.; Giusti, P.; Iacobucci, G.; Laurenti, G.; Levi, G.; Margotti, A.; Massam, T.; Nania, R.; Palmonari, F.; Polini, A.; Sartorelli, G.; Zamora Garcia, Y.; Zichichi, A.; Bornheim, A.; Crittenden, J.; Doeker, T.; Eckert, M.; Feld, L.; Frey, A.; Geerts, M.; Grothe, M.; Hartmann, H.; Heinloth, K.; Heinz, L.; Hilger, E.; Jakob, H.-P.; Katz, U. F.; Mengel, S.; Mollen, J.; Paul, E.; Pfeiffer, M.; Rembser, Ch.; Schramm, D.; Stamm, J.; Wedemeyer, R.; Campbell-Robson, S.; Cassidy, A.; Cottingham, W. N.; Dyce, N.; Foster, B.; George, S.; Hayes, M. E.; Heath, G. P.; Heath, H. F.; Piccioni, D.; Roff, D. G.; Tapper, R. J.; Yoshida, R.; Arneodo, M.; Ayad, R.; Capua, M.; Garfagnini, A.; Iannotti, L.; Schioppa, M.; Susinno, G.; Caldwell, A.; Cartiglia, N.; Jing, Z.; Liu, W.; Parsons, J. A.; Ritz, S.; Sciulli, F.; Straub, P. B.; Wai, L.; Yang, S.; Zhu, Q.; Borzemski, P.; Chwastowski, J.; Eskreys, A.; Zachara, M.; Zawiejski, L.; Adamczyk, L.; Bednarek, B.; Jeleń, K.; Kisielewska, D.; Kowalski, T.; Przybycień, M.; Rulikowska-Zarȩbska, E.; Suszycki, L.; Zajaç, J.; Kotański, A.; Bauerdick, L. A. T.; Behrens, U.; Beier, H.; Bienlein, J. K.; Deppe, O.; Desler, K.; Drews, G.; Flasiński, M.; Gilkinson, D. J.; Glasman, C.; Göttlicher, P.; Große-Knetter, J.; Haas, T.; Hain, W.; Hasell, D.; Heßling, H.; Iga, Y.; Johnson, K. F.; Joos, P.; Kasemann, M.; Klanner, R.; Koch, W.; Kötz, U.; Kowalski, H.; Labs, J.; Ladage, A.; Löhr, B.; Löwe, M.; Lüke, D.; Mainusch, J.; Mańczak, O.; Monteiro, T.; Ng, J. S. T.; Notz, D.; Ohrenberg, K.; Piotrzkowski, K.; Roco, M.; Rohde, M.; Roldán, J.; Schneekloth, U.; Schulz, W.; Selonke, F.; Surrow, B.; Voß, T.; Westphal, D.; Wolf, G.; Youngman, C.; Zeuner, W.; Grabosch, H. J.; Kharchilava, A.; Mari, S. M.; Meyer, A.; Schlenstedt, S.; Wulff, N.; Barbagli, G.; Gallo, E.; Pelfer, P.; Maccarrone, G.; De Pasquale, S.; Votano, L.; Bamberger, A.; Eisenhardt, S.; Trefzger, T.; Wölfle, S.; Bromley, J. T.; Brook, N. H.; Bussey, P. J.; Doyle, A. T.; Saxon, D. H.; Sinclair, L. E.; Utley, M. L.; Wilson, A. S.; Dannemann, A.; Holm, U.; Horstmann, D.; Sinkus, R.; Wick, K.; Burow, B. D.; Hagge, L.; Lohrmann, E.; Milewski, J.; Pavel, N.; Poelz, G.; Schott, W.; Zetsche, F.; Bacon, T. C.; Brümmer, N.; Butterworth, I.; Harris, V. L.; Howell, G.; Hung, B. H. Y.; Lamberti, L.; Long, K. R.; Miller, D. B.; Prinias, A.; Sedgbeer, J. K.; Sideris, D.; Whitfield, A. F.; Mallik, U.; Wang, M. Z.; Wang, S. M.; Wu, J. T.; Cloth, P.; Filges, D.; An, S. H.; Cho, G. H.; Ko, B. J.; Lee, S. B.; Nam, S. W.; Park, H. S.; Park, S. K.; Kartik, S.; Kim, H.-J.; McNeil, R. R.; Metcalf, W.; Nadendla, V. K.; Barreiro, F.; Cases, G.; Fernandez, J. P.; Graciani, R.; Hernández, J. M.; Hervás, L.; Labarga, L.; Martinez, M.; del Peso, J.; Puga, J.; Terron, J.; de Trocóniz, J. F.; Corriveau, F.; Hanna, D. S.; Hartmann, J.; Hung, L. W.; Lim, J. N.; Matthews, C. G.; Patel, P. M.; Riveline, M.; Stairs, D. G.; St-Laurent, M.; Ullmann, R.; Zacek, G.; Tsurugai, T.; Bashkirov, V.; Dolgoshein, B. A.; Stifutkin, A.; Bashindzhagyan, G. L.; Ermolov, P. F.; Gladilin, L. K.; Golubkov, Yu. A.; Kobrin, V. D.; Korzhavina, I. A.; Kuzmin, V. A.; Lukina, O. Yu.; Proskuryakov, A. S.; Savin, A. A.; Shcheglova, L. M.; Solomin, A. N.; Zotov, N. P.; Botje, M.; Chlebana, F.; Engelen, J.; de Kamps, M.; Kooijman, P.; Kruse, A.; van Sighem, A.; Tiecke, H.; Verkerke, W.; Vossebeld, J.; Vreeswijk, M.; Wiggers, L.; de Wolf, E.; van Woudenberg, R.; Acosta, D.; Bylsma, B.; Durkin, L. S.; Gilmore, J.; Li, C.; Ling, T. Y.; Nylander, P.; Park, I. H.; Romanowski, T. A.; Bailey, D. S.; Cashmore, R. J.; Cooper-Sarkar, A. M.; Devenish, R. C. E.; Harnew, N.; Lancaster, M.; Lindemann, L.; McFall, J. D.; Nath, C.; Noyes, V. A.; Quadt, A.; Tickner, J. R.; Uijterwaal, H.; Walczak, R.; Waters, D. S.; Wilson, F. F.; Yip, T.; Abbiendi, G.; Bertolin, A.; Brugnera, R.; Carlin, R.; Dal Corso, F.; De Giorgi, M.; Dosselli, U.; Limentani, S.; Morandin, M.; Posocco, M.; Stanco, L.; Stroili, R.; Voci, C.; Zuin, F.; Bulmahn, J.; Feild, R. G.; Oh, B. Y.; Whitmore, J. J.; D'Agostini, G.; Marini, G.; Nigro, A.; Tassi, E.; Hart, J. C.; McCubbin, N. A.; Shah, T. P.; Barberis, E.; Dubbs, T.; Heusch, C.; Van Hook, M.; Lockman, W.; Rahn, J. T.; Sadrozinski, H. F.-W.; Seiden, A.; Williams, D. C.; Biltzinger, J.; Seifert, R. J.; Schwarzer, O.; Walenta, A. H.; Zech, G.; Abramowicz, H.; Briskin, G.; Dagan, S.; Levy, A.; Fleck, J. I.; Inuzuka, M.; Ishii, T.; Kuze, M.; Mine, S.; Nakao, M.; Suzuki, I.; Tokushuku, K.; Umemori, K.; Yamada, S.; Yamazaki, Y.; Chiba, M.; Hamatsu, R.; Hirose, T.; Homma, K.; Kitamura, S.; Matsushita, T.; Yamauchi, K.; Cirio, R.; Costa, M.; Ferrero, M. I.; Maselli, S.; Peroni, C.; Sacchi, R.; Solano, A.; Staiano, A.; Dardo, M.; Bailey, D. C.; Benard, F.; Brkic, M.; Hartner, G. F.; Joo, K. K.; Levman, G. M.; Martin, J. F.; Orr, R. S.; Polenz, S.; Sampson, C. R.; Simmons, D.; Teuscher, R. J.; Butterworth, J. M.; Catterall, C. D.; Jones, T. W.; Kaziewicz, P. B.; Lane, J. B.; Saunders, R. L.; Shulman, J.; Sutton, M. R.; Lu, B.; Mo, L. W.; Bogusz, W.; Ciborowski, J.; Gajewski, J.; Grzelak, G.; Kasprzak, M.; Krzyżanowski, M.; Muchorowski, K.; Nowak, R. J.; Pawlak, J. M.; Tymieniecka, T.; Wróblewski, A. K.; Zakrzewski, J. A.; Żarnecki, A. F.; Adamus, M.; Coldewey, C.; Eisenberg, Y.; Karshon, U.; Revel, D.; Zer-Zion, D.; Badgett, W. F.; Breitweg, J.; Chapin, D.; Cross, R.; Dasu, S.; Foudas, C.; Loveless, R. J.; Mattingly, S.; Reeder, D. D.; Silverstein, S.; Smith, W. H.; Vaiciulis, A.; Wodarczyk, M.; Bhadra, S.; Cardy, M. L.; Fagerstroem, C.-P.; Frisken, W. R.; Khakzad, M.; Murray, W. N.; Schmidke, W. B.; ZEUS Collaboration

1996-02-01

The production of φ mesons in the reaction e+p → e+φp ( gf → K+K-) at a median Q2 of 10 -4 GeV 2 h been studied with the ZEUS detector at HERA. The differential φ photoproduction cross section {dσ}/{dt} has an exponential shape and has been determined in the kinematic range 0.1 < | t| < 0.5 GeV 2 and 60 < W < 80 GeV. An integrated cross sect σγp→ φp = 0.96±0.19 -0.18+0.21μb has been obtained by extrapolating to t = 0. When compared to lower energy data the results show a weak energy dependence of both σγp→ φp and the slope of the t distribution. The φ decay angular distributions are consistent with s-channel helicity conservation. From lower energies to HERA energies, the features of φ photoproduction are compatible with those of a soft diffractive process.

Reflections on the Implementation of Low-Dose Computed Tomography Screening in Individuals at High Risk of Lung Cancer in Spain.

PubMed

Garrido, Pilar; Sánchez, Marcelo; Belda Sanchis, José; Moreno Mata, Nicolás; Artal, Ángel; Gayete, Ángel; Matilla González, José María; Galbis Caravajal, José Marcelo; Isla, Dolores; Paz-Ares, Luis; Seijo, Luis M

2017-10-01

Lung cancer (LC) is a major public health issue. Despite recent advances in treatment, primary prevention and early diagnosis are key to reducing the incidence and mortality of this disease. A recent clinical trial demonstrated the efficacy of selective screening by low-dose computed tomography (LDCT) in reducing the risk of both lung cancer mortality and all-cause mortality in high-risk individuals. This article contains the reflections of an expert group on the use of LDCT for early diagnosis of LC in high-risk individuals, and how to evaluate its implementation in Spain. The expert group was set up by the Spanish Society of Pulmonology and Thoracic Surgery (SEPAR), the Spanish Society of Thoracic Surgery (SECT), the Spanish Society of Radiology (SERAM) and the Spanish Society of Medical Oncology (SEOM). Copyright © 2017 SEPAR. Publicado por Elsevier España, S.L.U. All rights reserved.

Aspergillus mulundensis sp. nov., a new species for the fungus producing the antifungal echinocandin lipopeptides, mulundocandins.

PubMed

Bills, Gerald F; Yue, Qun; Chen, Li; Li, Yan; An, Zhiqiang; Frisvad, Jens C

2016-03-01

The invalidly published name Aspergillus sydowii var. mulundensis was proposed for a strain of Aspergillus that produced new echinocandin metabolites designated as the mulundocadins. Reinvestigation of this strain (Y-30462=DSMZ 5745) using phylogenetic, morphological, and metabolic data indicated that it is a distinct and novel species of Aspergillus sect. Nidulantes. The taxonomic novelty, Aspergillus mulundensis, is introduced for this historically important echinocandin-producing strain. The closely related A. nidulans FGSC A4 has one of the most extensively characterized secondary metabolomes of any filamentous fungus. Comparison of the full-genome sequences of DSMZ 5745 and FGSC A4 indicated that the two strains share 33 secondary metabolite biosynthetic gene clusters. These shared gene clusters represent ~45% of the total secondary metabolome of each strain, thus indicating a high level intraspecific divergence in terms of secondary metabolism.

High resolution x-ray Thomson scattering measurements from cryogenic hydrogen jets using the linac coherent light source

DOE PAGES

Fletcher, L. B.; Zastrau, U.; Galtier, E.; ...

2016-08-15

Here, we present the first spectrally resolved measurements of x-rays scattered from cryogenic hydrogen jets in the single photon counting limit. The 120 Hz capabilities of the LCLS, together with a novel hydrogen jet design [J. B. Kim et al., Rev. Sci. Instrum. (these proceedings)], allow for the ability to record a near background free spectrum. Such high-dynamic-range x-ray scattering measurements enable a platform to study ultra-fast, laser-driven, heating dynamics of hydrogen plasmas. This measurement has been achieved using two highly annealed pyrolytic graphite crystal spectrometers to spectrally resolve 5.5 keV x-rays elastically and inelastically scattered from cryogenic hydrogen andmore » focused on Cornell-SLAC pixel array detectors [S. Herrmann et al., Nucl. Instrum. Methods Phys. Res., Sect. A 718, 550 (2013)].« less

Morphological phylogeny of Tradescantia L. (Commelinaceae) sheds light on a new infrageneric classification for the genus and novelties on the systematics of subtribe Tradescantiinae

PubMed Central

Pellegrini, Marco O. O.

2017-01-01

Abstract Throughout the years, three infrageneric classifications were proposed for Tradescantia along with several informal groups and species complexes. The current infrageneric classification accepts 12 sections – with T. sect. Tradescantia being further divided into four series – and assimilates many concepts adopted by previous authors. Recent molecular-based phylogenetic studies indicate that the currently accepted sections might not represent monophyletic groups within Tradescantia. Based on newly gathered morphological data on the group, complemented with available micromorphological, cytological and phytochemical data, I present the first morphology-based evolutionary hypothesis for Tradescantia. Furthermore, I reduce subtribe Thyrsantheminae to a synonym of subtribe Tradescantiinae, and propose a new infrageneric classification for Tradescantia, based on the total evidence of the present morphological phylogeny, in accordance to the previously published molecular data. PMID:29118649

The mystery of reincarnation

PubMed Central

Nagaraj, Anil Kumar Mysore; Nanjegowda, Raveesh Bevinahalli; Purushothama, S. M.

2013-01-01

One of the mysteries puzzling human mind since the origin of mankind is the concept of “reincarnation” which literally means “to take on the flesh again.” As the civilizations evolved, beliefs got discriminated and disseminated into various religions. The major division manifested was “East” and “West.” The eastern religions being more philosophical and less analytical, have accepted reincarnation. However, the different eastern religions like Hinduism, Jainism, and Buddhism have differed in their faith on rebirth. Further, the Islam as well as the most dominant religion of the world, Christianity, having its origin in the west, have largely denied reincarnation, though some sub-sects still show interest in it. Also many mystic and esoteric schools like theosophical society have their unique description on rebirth. This article describes reincarnation as perceived by various religions and new religious movements as well as some research evidence. PMID:23858250

Some Quantum Symmetries and Their Breaking II

NASA Astrophysics Data System (ADS)

Selesnick, S. A.

2013-04-01

We consider symmetry breaking in the context of vector bundle theory, which arises quite naturally not only when attempting to "gauge" symmetry groups, but also as a means of localizing those global symmetry breaking effects known as spontaneous. We review such spontaneous symmetry breaking first for a simplified version of the Goldstone scenario for the case of global symmetries, and then in a localized form which is applied to a derivation of some of the phenomena associated with superconduction in both its forms, type I and type II. We then extend these procedures to effect the Higgs mechanism of electroweak theory, and finally we describe an extension to the flavor symmetries of the lightest quarks, including a brief discussion of CP-violation in the neutral kaon system. A largely self-contained primer of vector bundle theory is provided in Sect. 4, which supplies most of the results required thereafter.

Carbohydrate Analysis

NASA Astrophysics Data System (ADS)

Bemiller, James N.

Carbohydrates are important in foods as a major source of energy, to impart crucial textural properties, and as dietary fiber which influences physiological processes. Digestible carbohydrates, which are converted into monosaccharides, which are absorbed, provide metabolic energy. Worldwide, carbohydrates account for more than 70% of the caloric value of the human diet. It is recommended that all persons should limit calories from fat (the other significant source) to not more than 30% and that most of the carbohydrate calories should come from starch. Nondigestible polysaccharides (all those other than starch) comprise the major portion of dietary fiber (Sect. 10.5). Carbohydrates also contribute other attributes, including bulk, body, viscosity, stability to emulsions and foams, water-holding capacity, freeze-thaw stability, browning, flavors, aromas, and a range of desirable textures (from crispness to smooth, soft gels). They also provide satiety. Basic carbohydrate structures, chemistry, and terminology can be found in references (1, 2).

Low-Threshold Lasing from 2D Homologous Organic-Inorganic Hybrid Ruddlesden-Popper Perovskite Single Crystals.

PubMed

Raghavan, Chinnambedu Murugesan; Chen, Tzu-Pei; Li, Shao-Sian; Chen, Wei-Liang; Lo, Chao-Yuan; Liao, Yu-Ming; Haider, Golam; Lin, Cheng-Chieh; Chen, Chia-Chun; Sankar, Raman; Chang, Yu-Ming; Chou, Fang-Cheng; Chen, Chun-Wei

2018-05-09

Organic-inorganic hybrid two-dimensional (2D) perovskites have recently attracted great attention in optical and optoelectronic applications due to their inherent natural quantum-well structure. We report the growth of high-quality millimeter-sized single crystals belonging to homologous two-dimensional (2D) hybrid organic-inorganic Ruddelsden-Popper perovskites (RPPs) of (BA) 2 (MA) n-1 Pb n I 3 n+1 ( n = 1, 2, and 3) by a slow evaporation at a constant-temperature (SECT) solution-growth strategy. The as-grown 2D hybrid perovskite single crystals exhibit excellent crystallinity, phase purity, and spectral uniformity. Low-threshold lasing behaviors with different emission wavelengths at room temperature have been observed from the homologous 2D hybrid RPP single crystals. Our result demonstrates that solution-growth homologous organic-inorganic hybrid 2D perovskite single crystals open up a new window as a promising candidate for optical gain media.

On the error in the nucleus-centered multipolar expansion of molecular electron density and its topology: A direct-space computational study

NASA Astrophysics Data System (ADS)

Michael, J. Robert; Koritsanszky, Tibor

2017-05-01

The convergence of nucleus-centered multipolar expansion of the quantum-chemical electron density (QC-ED), gradient, and Laplacian is investigated in terms of numerical radial functions derived by projecting stockholder atoms onto real spherical harmonics at each center. The partial sums of this exact one-center expansion are compared with the corresponding Hansen-Coppens pseudoatom (HC-PA) formalism [Hansen, N. K. and Coppens, P., "Testing aspherical atom refinements on small-molecule data sets," Acta Crystallogr., Sect. A 34, 909-921 (1978)] commonly utilized in experimental electron density studies. It is found that the latter model, due to its inadequate radial part, lacks pointwise convergence and fails to reproduce the local topology of the target QC-ED even at a high-order expansion. The significance of the quantitative agreement often found between HC-PA-based (quadrupolar-level) experimental and extended-basis QC-EDs can thus be challenged.

Evaluation and statistical judgement of neural responses to sinusoidal stimulation in cases with superimposed drift and noise.

PubMed

Jastreboff, P W

1979-06-01

Time histograms of neural responses evoked by sinuosidal stimulation often contain a slow drifting and an irregular noise which disturb Fourier analysis of these responses. Section 2 of this paper evaluates the extent to which a linear drift influences the Fourier analysis, and develops a combined Fourier and linear regression analysis for detecting and correcting for such a linear drift. Usefulness of this correcting method is demonstrated for the time histograms of actual eye movements and Purkinje cell discharges evoked by sinusoidal rotation of rabbits in the horizontal plane. In Sect. 3, the analysis of variance is adopted for estimating the probability of the random occurrence of the response curve extracted by Fourier analysis from noise. This method proved to be useful for avoiding false judgements as to whether the response curve was meaningful, particularly when the response was small relative to the contaminating noise.

[Herbal textual research on origins of Chonglou].

PubMed

Jiang, Lu; Kang, Li-Ping; Liu, Da-Hui; Peng, Hua-Sheng; Xie, Jin; Chen, Min

2017-09-01

Based on the field investigation, this paper researched the germplasms and geoherbs habitat of Chonglou in ancient herbal books systematically. The results showed that, Chonglou in ancient herbal books sometimes referred to certain specific germplasm, while sometimes it referred to many species derived from genus Paris except Sect. Paris. The medicinal material Chonglou in Chinese Materia Medica Bencaotujing and Bencaomengquan was verified as P. polyphylla var. chinensis, which could be P. polyphylla in Xinxiubencao, and it should include P. polyphylla or P. polyphylla var. stenophylla in Bencaogangmu. However, it proved to be a variety of species from Paris that can used as Chonglou in Diannanbencao and Zhiwumingshitukao. Moreover, the origins of Chonglou were correspondingly more diverse, with its producing areas changed from North to South. Therefore, with the resources increasing endangered, the botanical origin of Chonglou should be further studied. Copyright© by the Chinese Pharmaceutical Association.

Rheological Principles for Food Analysis

NASA Astrophysics Data System (ADS)

Daubert, Christopher R.; Foegeding, E. Allen

Food scientists are routinely confronted with the need to measure physical properties related to sensory texture and processing needs. These properties are determined by rheological methods, where rheology is a science devoted to the deformation and flow of all materials. Rheological properties should be considered a subset of the textural properties of foods, because the sensory detection of texture encompasses factors beyond rheological properties. Specifically, rheological methods accurately measure "force," "deformation," and "flow," and food scientists and engineers must determine how best to apply this information. For example, the flow of salad dressing from a bottle, the snapping of a candy bar, or the pumping of cream through a homogenizer are each related to the rheological properties of these materials. In this chapter, we describe fundamental concepts pertinent to the understanding of the subject and discuss typical examples of rheological tests for common foods. A glossary is included as Sect. 30.6 to clarify and summarize rheological definitions throughout the chapter.

Development and characterization of EST-SSR markers for Begonia luzhaiensis (Begoniaceae)1

PubMed Central

Tseng, Yu-Hsin; Huang, Han-Yau; Xu, Wei-Bin; Yang, Hsun-An; Liu, Yan; Peng, Ching-I; Chung, Kuo-Fang

2017-01-01

Premise of the study: Microsatellite primers were developed for Begonia luzhaiensis (Begoniaceae) to assess genetic diversity and population genetic structure. Methods and Results: Based on the transcriptome data of B. luzhaiensis, 60 primer pairs were selected for initial validation, of which 16 yielded polymorphic microsatellite loci in 57 individuals. The number of alleles observed for these 16 loci ranged from one to nine. The observed and expected heterozygosity ranged from 0.000 to 1.000 and from 0.000 to 0.804 with averages of 0.370 and 0.404, respectively. Five loci could be successfully amplified in B. leprosa. Conclusions: The expressed sequence tag–simple sequence repeat markers are the first specifically developed for B. luzhaiensis and the first developed in Begonia sect. Coelocentrum. These markers will be useful for future studies of the genetic structure and phylogeography of B. luzhaiensis. PMID:28529834

Communication and Cultural Change in University Technology Transfer

ERIC Educational Resources Information Center

Wright, David

2013-01-01

Faculty culture and communication networks are pivotal components of technology transfer on university campuses. Universities are focused upon diffusing technology to external clients and upon building structure and support systems to enhance technology transfer. However, engaging faculty members in technology transfer requires an internal…

Government/industry response to questionnaire on space mechanisms/tribology technology needs

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1991-01-01

President Bush has proposed that the U.S. undertake an ambitious mission of manned and robotic exploration of the solar system. This mission will require advanced mechanical moving components, such as bearings, gears, seals, lubricants, etc. There has been concern in the NASA community that the current technology level in these mechanical component/tribology areas may not be adequate to meet the goals of such a mission. To attempt to answer this, NASA-Lewis has sent out a questionnaire to government and industry workers (who have been involved in space mechanism research, design, and implementation) to ask their opinion if the current space mechanisms technology (mechanical components/tribology) is adequate to meet future NASA Missions needs and goals. If they deemed that the technology base inadequate, they were asked to specify the areas of greatest need. The unedited remarks of those who responded to the survey are presented.

Low Cost, Upper Stage-Class Propulsion

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The low cost, upper stage-class propulsion (LCUSP) element will develop a high strength copper alloy additive manufacturing (AM) process as well as critical components for an upper stage-class propulsion system that will be demonstrated with testing. As manufacturing technologies have matured, it now appears possible to build all the major components and subsystems of an upper stage-class rocket engine for substantially less money and much faster than traditionally done. However, several enabling technologies must be developed before that can happen. This activity will address these technologies and demonstrate the concept by designing, manufacturing, and testing the critical components of a rocket engine. The processes developed and materials' property data will be transitioned to industry upon completion of the activity. Technologies to enable the concept are AM copper alloy process development, AM post-processing finishing to minimize surface roughness, AM material deposition on existing copper alloy substrate, and materials characterization.

Advanced Turbine Technology Applications Project (ATTAP) 1993 annual report

NASA Technical Reports Server (NTRS)

1994-01-01

This report summarizes work performed by AlliedSignal Engines, a unit of AlliedSignal Aerospace Company, during calendar year 1993, toward development and demonstration of structural ceramic technology for automotive gas turbine engines. This work was performed for the U.S. Department of Energy (DOE) under National Aeronautics and Space Administration (NASA) Contract DEN3-335, Advanced Turbine Technology Applications Project (ATFAP). During 1993, the test bed used to demonstrate ceramic technology was changed from the AlliedSignal Engines/Garrett Model AGT101 regenerated gas turbine engine to the Model 331-200(CT) engine. The 331-200(CT) ceramic demonstrator is a fully-developed test platform based on the existing production AlliedSignal 331-200(ER) gas turbine auxiliary power unit (APU), and is well suited to evaluating ceramic turbine blades and nozzles. In addition, commonality of the 331-200(CT) engine with existing gas turbine APU's in commercial service provides the potential for field testing of ceramic components. The 1993 ATTAP activities emphasized design modifications of the 331-200 engine test bed to accommodate ceramic first-stage turbine nozzles and blades, fabrication of the ceramic components, ceramic component proof and rig tests, operational tests of the test bed equipped with the ceramic components, and refinement of critical ceramic design technologies.

A research project to develop and evaluate a technical education component on materials technology for orientation to space-age technology

NASA Technical Reports Server (NTRS)

Jacobs, J. A.

1976-01-01

A project was initiated to develop, implement, and evaluate a prototype component for self-pacing, individualized instruction on basic materials science. Results of this project indicate that systematically developed, self-paced instruction provides an effective means for orienting nontraditional college students and secondary students, especially minorities, to both engineering technology and basic materials science. In addition, students using such a system gain greater chances for mastering subject matter than with conventional modes of instruction.

Overview of NASA/OAST efforts related to manufacturing technology

NASA Technical Reports Server (NTRS)

Saunders, N. T.

1976-01-01

Activities of the Office of Aeronautics and Space Technology (OAST) in a number of areas related to manufacturing technology are considered. In the computer-aided design area improved approaches are developed for the design of specific classes of components or structural subsystems. A generalized approach for the design of a complete aerospace vehicle is also developed. Efforts directed toward an increased use of composite materials in aerospace structures are also discussed and attention is given to projects concerned with the manufacture of turbine engine components.

High Cost/High Risk Components to Chalcogenide Molded Lens Model: Molding Preforms and Mold Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernacki, Bruce E.

2012-10-05

This brief report contains a critique of two key components of FiveFocal's cost model for glass compression molding of chalcogenide lenses for infrared applications. Molding preforms and mold technology have the greatest influence on the ultimate cost of the product and help determine the volumes needed to select glass molding over conventional single-point diamond turning or grinding and polishing. This brief report highlights key areas of both technologies with recommendations for further study.

Environmental Aspects Of The Green Surface Plastic Deformation Technology Of Car Parts

NASA Astrophysics Data System (ADS)

Grigoriev, S. N.; Bobrovskij, N. M.; Bobrovskij, I. N.; Melnikov, P. A.; Lukyanov, A. A.

2017-01-01

Foreign and domestic experience in development of dry processing technologies are considered. The results of the introduction of dry processing technologies (cutting, boring, milling, drilling) on the industrial companies in Germany are given. The negative impact on the environment and human health is shown. The possible ways of leakage of lubricoolant components in the atmosphere and soil are considered. Lubricoolants are considered as a required permanent component. Three main tasks for lubricoolant: cooling, lubricating and chip disposal are discribed.

Compare Vehicle Technologies | Transportation Research | NREL

Science.gov Websites

electric car diagramming energy storage, power electronics, and climate control components, as well as storage, power electronics, and climate control components, as well as energy flow among components. 3-D control components, as well as energy flow among components. 3-D illustration of electric car diagramming

The Status of Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System and ultralightweight propellant tank technologies. Future directions for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV); and 3) electric propulsion. These technologies are more vehicles and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These inspace propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The status of spacecraft bus and platform technology development under the NASA ISPT program

NASA Astrophysics Data System (ADS)

Anderson, D. J.; Munk, M. M.; Pencil, E.; Dankanich, J.; Glaab, L.; Peterson, T.

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN& C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System and ultra-lightweight propellant tank technologies. Future directions for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV); and 3) electric propulsion. These technologies are more vehicles and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicabilit- to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The Status of Spacecraft Bus and Platform Technology Development Under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric J.; Dankanich, John; Glaab, Louis J.

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance 2) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV) 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) and 3) electric propulsion. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

VERIFICATION OF HIGH-RATE DISINFECTION TECHNOLOGIES FOR WET-WEATHER FLOW APPLICATIONS

EPA Science Inventory

This paper describes the critical components of the USEPA's Environmental Technology Verification Program for two specific technologies categories: ultraviolet disinfection technologies for treating combined sewer overflow (CSO) and sanitary sewer overflow (SSO), and; and mechani...

Active and Passive Technology Integration: A Novel Approach for Managing Technology's Influence on Learning Experiences in Context-Aware Learning Spaces

ERIC Educational Resources Information Center

Laine, Teemu H.; Nygren, Eeva

2016-01-01

Technology integration is the process of overcoming different barriers that hinder efficient utilisation of learning technologies. The authors divide technology integration into two components based on technology's role in the integration process. In active integration, the technology integrates learning resources into a learning space, making it…

Ceramic applications in turbine engines

NASA Technical Reports Server (NTRS)

Helms, H. E.; Heitman, P. W.; Lindgren, L. C.; Thrasher, S. R.

1984-01-01

The application of ceramic components to demonstrate improved cycle efficiency by raising the operating temperature of the existing Allison IGI 404 vehicular gas turbine engine is discussed. This effort was called the Ceramic Applications in Turbine Engines (CATE) program and has successfully demonstrated ceramic components. Among these components are two design configurations featuring stationary and rotating caramic components in the IGT 404 engine. A complete discussion of all phases of the program, design, materials development, fabrication of ceramic components, and testing-including rig, engine, and vehicle demonstation test are presented. During the CATE program, a ceramic technology base was established that is now being applied to automotive and other gas turbine engine programs. This technology base is outlined and also provides a description of the CATE program accomplishments.

NASA In-Space Propulsion Technologies and Their Infusion Potential

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil,Eric J.; Peterson, Todd; Vento, Daniel; Munk, Michelle M.; Glaab, Louis J.; Dankanich, John W.

2012-01-01

The In-Space Propulsion Technology (ISPT) program has been developing in-space propulsion technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (Electric and Chemical), Entry Vehicle Technologies (Aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies that will be ready for flight infusion in the near future will be Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future focuses for ISPT are sample return missions and other spacecraft bus technologies like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle-focused, and present a different set of technology infusion challenges. While the Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Gender Preferences in Technology Student Association Competitions

ERIC Educational Resources Information Center

Mitts, Charles R.

2008-01-01

Society is increasingly dominated by rapidly evolving systems of technology. The goal of technology education, as an academic component of public education, is to ensure that students become "technologically literate" members of society who are able to understand, access, use, manage, and control these technological systems.…

Trajectory correction propulsion for TOPS

NASA Technical Reports Server (NTRS)

Long, H. R.; Bjorklund, R. A.

1972-01-01

A blowdown-pressurized hydrazine propulsion system was selected to provide trajectory correction impulse for outer planet flyby spacecraft as the result of cost/mass/reliability tradeoff analyses. Present hydrazine component and system technology and component designs were evaluated for application to the Thermoelectric Outer Planet Spacecraft (TOPS); while general hydrazine technology was adequate, component design changes were deemed necessary for TOPS-type missions. A prototype hydrazine propulsion system was fabricated and fired nine times for a total of 1600 s to demonstrate the operation and performance of the TOPS propulsion configuration. A flight-weight trajectory correction propulsion subsystem (TCPS) was designed for the TOPS based on actual and estimated advanced components.

Ad hoc Laser networks component technology for modular spacecraft

NASA Astrophysics Data System (ADS)

Huang, Xiujun; Shi, Dele; Ma, Zongfeng; Shen, Jingshi

2016-03-01

Distributed reconfigurable satellite is a new kind of spacecraft system, which is based on a flexible platform of modularization and standardization. Based on the module data flow analysis of the spacecraft, this paper proposes a network component of ad hoc Laser networks architecture. Low speed control network with high speed load network of Microwave-Laser communication mode, no mesh network mode, to improve the flexibility of the network. Ad hoc Laser networks component technology was developed, and carried out the related performance testing and experiment. The results showed that ad hoc Laser networks components can meet the demand of future networking between the module of spacecraft.

Ad hoc laser networks component technology for modular spacecraft

NASA Astrophysics Data System (ADS)

Huang, Xiujun; Shi, Dele; Shen, Jingshi

2017-10-01

Distributed reconfigurable satellite is a new kind of spacecraft system, which is based on a flexible platform of modularization and standardization. Based on the module data flow analysis of the spacecraft, this paper proposes a network component of ad hoc Laser networks architecture. Low speed control network with high speed load network of Microwave-Laser communication mode, no mesh network mode, to improve the flexibility of the network. Ad hoc Laser networks component technology was developed, and carried out the related performance testing and experiment. The results showed that ad hoc Laser networks components can meet the demand of future networking between the module of spacecraft.

78 FR 70888 - Need for Agency Approval of a Railroad's Use of Certain Technology That Has Been Previously...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-27

... technologies, namely safety-critical processor-based signal or train control systems, including subsystems and... or train control system (including a subsystem or component thereof) that was in service as of June 6... processor-based signal or train control system, subsystem, or component.'' See 49 CFR 236.903. Under Subpart...

Exploration Systems Health Management Facilities and Testbed Workshop

NASA Technical Reports Server (NTRS)

Wilson, Scott; Waterman, Robert; McCleskey, Carey

2004-01-01

Presentation Agenda : (1) Technology Maturation Pipeline (The Plan) (2) Cryogenic testbed (and other KSC Labs) (2a) Component / Subsystem technologies (3) Advanced Technology Development Center (ATDC) (3a) System / Vehic1e technologies (4) EL V Flight Experiments (Flight Testbeds).

Technology Assessment for Powertrain Components Final Report CRADA No. TC-1124-95

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tokarz, F.; Gough, C.

LLNL utilized its defense technology assessment methodologies in combination with its capabilities in the energy; manufacturing, and transportation technologies to demonstrate a methodology that synthesized available but incomplete information on advanced automotive technologies into a comprehensive framework.

Exploring Students' Technology Acceptance in College Developmental Mathematics

ERIC Educational Resources Information Center

Williams, Handan

2012-01-01

Technology has become a large component of teaching and learning in mathematics education. Gaining insight into students' technology acceptance factors is a crucial step in understanding instructional design and implementation of technology-based learning programs. Despite the widespread use of technology in education, few research efforts…

Entrepreneurship. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on entrepreneurship for students in grades 6-10 consists of a technology education overview, information on use, and instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor's and student's sections are…

Introduction to Animation. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on introduction to animation for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Section components are described next. The…

Audiovisual Programming. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on audiovisual programming for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor's and student's sections…

Health Occupations. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on health occupations for students in grades 6-10 consists of a technology education overview, information on use, and instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor's and student's sections are…

Electronic Publishing. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on electronic publishing for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor and student sections are…

Career Search. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on career search for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor's and student's sections are…

Innovation processes in technologies for the processing of refractory mineral raw materials

NASA Astrophysics Data System (ADS)

Chanturiya, V. A.

2008-12-01

Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

A compendium of solar dish/Stirling technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stine, W.B.; Diver, R.B.

1994-01-01

This report surveys the emerging dish/Stirling technology. It documents -- using consistent terminology the design characteristics of dish concentrators, receivers, and Stirling engines applicable to solar electric power generation. Development status and operating experience for each system and an overview of dish/Stirling technology are also presented. This report enables comparisons of concentrator, receiver, and engine technologies. Specifications and performance data are presented on systems and on components that are in use or that could be used in dish/Stirling systems. This report is organized into two parts: The first part (Chapters 1 through 4) provides an overview of dish/Stirling technology --more » the dish/ Stirling components (concentrator, receiver, and engine/alternator), current technology, basic theory, and technology development. The second part (Chapters 5 through 7) provides a detailed survey of the existing dish/Stirling concentrators, receivers, and engine/alternators.« less

Emerging technologies in arthroplasty: additive manufacturing.

PubMed

Banerjee, Samik; Kulesha, Gene; Kester, Mark; Mont, Michael A

2014-06-01

Additive manufacturing is an industrial technology whereby three-dimensional visual computer models are fabricated into physical components by selectively curing, depositing, or consolidating various materials in consecutive layers. Although initially developed for production of simulated models, the technology has undergone vast improvements and is currently increasingly being used for the production of end-use components in various aerospace, automotive, and biomedical specialties. The ability of this technology to be used for the manufacture of solid-mesh-foam monolithic and coated components of complex geometries previously considered unmanufacturable has attracted the attention of implant manufacturers, bioengineers, and orthopedic surgeons. Currently, there is a paucity of reports describing this fabrication method in the orthopedic literature. Therefore, we aimed to briefly describe this technology, some of the applications in other orthopedic subspecialties, its present use in hip and knee arthroplasty, and concerns with the present form of the technology. As there are few reports of clinical trials presently available, the true benefits of this technology can only be realized when studies evaluating the clinical and radiographic outcomes of cementless implants manufactured with additive manufacturing report durable fixation, less stress shielding, and better implant survivorship. Nevertheless, the authors believe that this technology holds great promise and may potentially change the conventional methods of casting, machining, and tooling for implant manufacturing in the future. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Controls and Health Management Technologies for Intelligent Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Garg, Sanjay

2004-01-01

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Technology Branch at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of an Intelligent Engine. The key enabling technologies for an Intelligent Engine are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This paper describes the current activities of the Controls and Dynamics Technology Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

The WCSAR telerobotics test bed

NASA Technical Reports Server (NTRS)

Duffie, N.; Zik, J.; Teeter, R.; Crabb, T.

1988-01-01

Component technologies for use in telerobotic systems for space are being developed. As part of this effort, a test bed was established in which these technologies can be verified and integrated into telerobotic systems. The facility consists of two slave industrial robots, an articulated master arm controller, a cartesian coordinate master arm controller, and a variety of sensors, displays and stimulators for feedback to human operators. The controller of one of the slave robots remains in its commercial state, while the controller of the other robot has been replaced with a new controller that achieves high-performance in telerobotic operating modes. A dexterous slave hand which consists of two fingers and a thumb is being developed, along with a number of force-reflecting and non-force reflecting master hands, wrists and arms. A tactile sensing finger tip based on piezo-film technology has been developed, along with tactile stimulators and CAD-based displays for sensory feedback and sensory substitution. The telerobotics test bed and its component technologies are described, as well as the integration of these component technologies into telerobotic systems, and their performance in conjunction with human operators.

School-Based Technology Use Planning.

ERIC Educational Resources Information Center

Cradler, John

1994-01-01

Describes how to conduct systematic planning for technology use. The components of an effective technology use plan, derived from a comprehensive study of school-based technology, are given. Planning development, implementation, and evaluation steps are provided. Ten planning resource books are listed. (Contains five references.) (KRN)

Technological Literacy for Students Aged 6-18: A New Method for Holistic Measuring of Knowledge, Capabilities, Critical Thinking and Decision-Making

ERIC Educational Resources Information Center

Avsec, Stanislav; Jamšek, Janez

2016-01-01

Technological literacy is identified as a vital achievement of technology- and engineering-intensive education. It guides the design of technology and technical components of educational systems and defines competitive employment in technological society. Existing methods for measuring technological literacy are incomplete or complicated,…

The Coevolution of Society and Multimedia Technology: Issues in Predicting the Future Innovation and Use of a Ubiquitous Technology.

ERIC Educational Resources Information Center

Stewart, James; Williams, Robin

1998-01-01

Criticizes "technologically deterministic" approaches, which seek to extrapolate social change from technological potential. Shows how a three-layer model of component, system, and application technologies can be used to integrate findings from the use and development of technology in specific sectors. Examines three cases of…

An innovative approach to predict technology evolution for the desoldering of printed circuit boards: A perspective from China and America.

PubMed

Wang, Chen; Zhao, Wu; Wang, Jie; Chen, Ling; Luo, Chun-Jing

2016-06-01

The printed circuit boards basis of electronic equipment have seen a rapid growth in recent years and played a significant role in modern life. Nowadays, the fact that electronic devices upgrade quickly necessitates a proper management of waste printed circuit boards. Non-destructive desoldering of waste printed circuit boards becomes the first and the most crucial step towards recycling electronic components. Owing to the diversity of materials and components, the separation process is difficult, which results in complex and expensive recovery of precious materials and electronic components from waste printed circuit boards. To cope with this problem, we proposed an innovative approach integrating Theory of Inventive Problem Solving (TRIZ) evolution theory and technology maturity mapping system to forecast the evolution trends of desoldering technology of waste printed circuit boards. This approach can be applied to analyse the technology evolution, as well as desoldering technology evolution, then research and development strategy and evolution laws can be recommended. As an example, the maturity of desoldering technology is analysed with a technology maturity mapping system model. What is more, desoldering methods in different stages are analysed and compared. According to the analysis, the technological evolution trends are predicted to be 'the law of energy conductivity' and 'increasing the degree of idealisation'. And the potential technology and evolutionary state of waste printed circuit boards are predicted, offering reference for future waste printed circuit boards recycling. © The Author(s) 2016.

Some legal, jurisdictional, and operational implications of a congressional technology assessment component

NASA Technical Reports Server (NTRS)

Mayo, L. H.

1975-01-01

An analysis is presented for the Congress of the relationships between an institutionalized assessment function and legislative information gathering and decisionmaking needs. The study was directed to the following topics: (1) the positing of a hypothetical technology assessment component for legislative support; (2) the posing of a number of questions relating to the operational context of this assessment component including the organization/operational framework, general operational problems, access to relevant information, and the utilization of assessment data and analyses; and (3) some selected comments relevant to the questions posed.

Lasers in automobile production

NASA Astrophysics Data System (ADS)

Pizzi, P.

There is a trend in mechanical equipment to replace complicated mechanical components with electronics, especially microprocessors, laser technology represents an important new tool. The effects of laser technology can be seen in production systems concerned with cutting, welding, heat treatment, and the alloying of mechanical components. Applications in the automobile industry today are not very widespread and are concerned essentially with welding and cutting.

Application of acoustic surface wave filter-beam lead component technology to deep space multimission hardware design

NASA Technical Reports Server (NTRS)

Kermode, A. W.; Boreham, J. F.

1974-01-01

This paper discusses the utilization of acoustic surface wave filters, beam lead components, and thin film metallized ceramic substrate technology as applied to the design of deep space, long-life, multimission transponder. The specific design to be presented is for a second mixer local oscillator module, operating at frequencies as high as 249 MHz.

The Development of a Field Services Network for a Satellite-Based Educational Telecommunications Experiment. Satellite Technology Demonstration, Technical Report No. 0333.

ERIC Educational Resources Information Center

Anderson, Frank; And Others

The Satellite Technology Demonstration (STD) of the Federation of Rocky Mountain States (FRMS) employed a technical delivery system to merge effectively hardware and software, products and services. It also needed a nontechnical component to insure product and service acceptance. Accordingly, the STD's Utilization Component was responsible for…

Propulsion system research and development for electric and hybrid vehicles

NASA Technical Reports Server (NTRS)

Schwartz, H. J.

1980-01-01

An approach to propulsion subsystem technology is presented. Various tests of component reliability are described to aid in the production of better quality vehicles. component characterization work is described to provide engineering data to manufacturers on component performance and on important component propulsion system interactions.

Lightning Protection

NASA Technical Reports Server (NTRS)

1991-01-01

Lightning Technologies, Inc., Pittsfield, MA, - a spinoff company founded by president J. Anderson Plumer, a former NASA contractor employee who developed his expertise with General Electric Company's High Voltage Laboratory - was a key player in Langley Research Center's Storm Hazards Research Program. Lightning Technologies used its NASA acquired experience to develop protective measures for electronic systems and composite structures on aircraft, both of which are particularly susceptible to lightning damage. The company also provides protection design and verification testing services for complete aircraft systems or individual components. Most aircraft component manufacturers are among Lightning Technologies' clients.

Space Power Management and Distribution Status and Trends

NASA Technical Reports Server (NTRS)

Reppucci, G. M.; Biess, J. J.; Inouye, L.

1984-01-01

An overview of space power management and distribution (PMAD) is provided which encompasses historical and current technology trends. The PMAD components discussed include power source control, energy storage control, and load power processing electronic equipment. The status of distribution equipment comprised of rotary joints and power switchgear is evaluated based on power level trends in the public, military, and commercial sectors. Component level technology thrusts, as driven by perceived system level trends, are compared to technology status of piece-parts such as power semiconductors, capacitors, and magnetics to determine critical barriers.

Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

The impact of fuels on aircraft technology through the year 2000

NASA Technical Reports Server (NTRS)

Grobman, J.; Reck, G. M.

1980-01-01

The impact that the supply, quality, and processing costs of future fuels may have on aircraft technology is assessed. The potential range of properties for future jet fuels is discussed along with the establishment of a data base of fuel property effects on propulsion system components. Also, the evolution and evaluation of advanced component technology that would permit the use of broader property fuels and the identification of technical and economic trade-offs within the overall fuel production-air transportation system associated with variations in fuel properties are examined.

Solar thermal program summary. Volume 1: Overview, fiscal year 1988

NASA Astrophysics Data System (ADS)

1989-02-01

The goal of the solar thermal program is to improve overall solar thermal systems performance and provide cost-effective energy options that are strategically secure and environmentally benign. Major research activities include energy collection technology, energy conversion technology, and systems and applications technology for both CR and DR systems. This research is being conducted through research laboratories in close coordination with the solar thermal industry, utilities companies, and universities. The Solar Thermal Technology Program is pursuing the development of critical components and subsystems for improved energy collection and conversion devices. This development follows two basic paths: for CR systems, critical components include stretched membrane heliostats, direct absorption receivers (DARs), and transport subsystems for molten salt heat transfer fluids. These components offer the potential for a significant reduction in system costs; and for DR systems, critical components include stretched membrane dishes, reflux receivers, and Stirling engines. These components will significantly increase system reliability and efficiency, which will reduce costs. The major thrust of the program is to provide electric power. However, there is an increasing interest in the use of concentrated solar energy for applications such as detoxifying hazardous wastes and developing high-value transportable fuels. These potential uses of highly concentrated solar energy still require additional experiments to prove concept feasibility. The program goal of economically competitive energy reduction from solar thermal systems is being cooperatively addressed by industry and government.

Architecture, Voltage, and Components for a Turboelectric Distributed Propulsion Electric Grid

NASA Technical Reports Server (NTRS)

Armstrong, Michael J.; Blackwelder, Mark; Bollman, Andrew; Ross, Christine; Campbell, Angela; Jones, Catherine; Norman, Patrick

2015-01-01

The development of a wholly superconducting turboelectric distributed propulsion system presents unique opportunities for the aerospace industry. However, this transition from normally conducting systems to superconducting systems significantly increases the equipment complexity necessary to manage the electrical power systems. Due to the low technology readiness level (TRL) nature of all components and systems, current Turboelectric Distributed Propulsion (TeDP) technology developments are driven by an ambiguous set of system-level electrical integration standards for an airborne microgrid system (Figure 1). While multiple decades' worth of advancements are still required for concept realization, current system-level studies are necessary to focus the technology development, target specific technological shortcomings, and enable accurate prediction of concept feasibility and viability. An understanding of the performance sensitivity to operating voltages and an early definition of advantageous voltage regulation standards for unconventional airborne microgrids will allow for more accurate targeting of technology development. Propulsive power-rated microgrid systems necessitate the introduction of new aircraft distribution system voltage standards. All protection, distribution, control, power conversion, generation, and cryocooling equipment are affected by voltage regulation standards. Information on the desired operating voltage and voltage regulation is required to determine nominal and maximum currents for sizing distribution and fault isolation equipment, developing machine topologies and machine controls, and the physical attributes of all component shielding and insulation. Voltage impacts many components and system performance.

Understanding Preservice Teachers' Technology Use through TPACK Framework

ERIC Educational Resources Information Center

Pamuk, S.

2012-01-01

This study discusses preservice teachers' achievement barriers to technology integration, using principles of technological pedagogical content knowledge (TPACK) as an evaluative framework. Technology-capable participants each freely chose a content area to comprise project. Data analysis based on interactions among core components of TPACK…

Conceptual framework for the mapping of management process with information technology in a business process.

PubMed

Rajarathinam, Vetrickarthick; Chellappa, Swarnalatha; Nagarajan, Asha

2015-01-01

This study on component framework reveals the importance of management process and technology mapping in a business environment. We defined ERP as a software tool, which has to provide business solution but not necessarily an integration of all the departments. Any business process can be classified as management process, operational process and the supportive process. We have gone through entire management process and were enable to bring influencing components to be mapped with a technology for a business solution. Governance, strategic management, and decision making are thoroughly discussed and the need of mapping these components with the ERP is clearly explained. Also we suggest that implementation of this framework might reduce the ERP failures and especially the ERP misfit was completely rectified.

Research on The Construction of Flexible Multi-body Dynamics Model based on Virtual Components

NASA Astrophysics Data System (ADS)

Dong, Z. H.; Ye, X.; Yang, F.

2018-05-01

Focus on the harsh operation condition of space manipulator, which cannot afford relative large collision momentum, this paper proposes a new concept and technology, called soft-contact technology. In order to solve the problem of collision dynamics of flexible multi-body system caused by this technology, this paper also proposes the concepts of virtual components and virtual hinges, and constructs flexible dynamic model based on virtual components, and also studies on its solutions. On this basis, this paper uses NX to carry out model and comparison simulation for space manipulator in 3 different modes. The results show that using the model of multi-rigid body + flexible body hinge + controllable damping can make effective control on amplitude for the force and torque caused by target satellite collision.

Conceptual Framework for the Mapping of Management Process with Information Technology in a Business Process

PubMed Central

Chellappa, Swarnalatha; Nagarajan, Asha

2015-01-01

This study on component framework reveals the importance of management process and technology mapping in a business environment. We defined ERP as a software tool, which has to provide business solution but not necessarily an integration of all the departments. Any business process can be classified as management process, operational process and the supportive process. We have gone through entire management process and were enable to bring influencing components to be mapped with a technology for a business solution. Governance, strategic management, and decision making are thoroughly discussed and the need of mapping these components with the ERP is clearly explained. Also we suggest that implementation of this framework might reduce the ERP failures and especially the ERP misfit was completely rectified. PMID:25861688

77 FR 65713 - Certain Optoelectronic Devices for Fiber Optic Communications, Components Thereof, and Products...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-30

..., as amended, 19 U.S.C. 1337, on behalf of Avago Technologies Fiber IP (Singapore) Pte. Ltd. of Singapore; Avago Technologies General IP (Singapore) Pte. Ltd. of Singapore; and Avago Technologies U.S. Inc... Technologies Fiber IP, (Singapore) Pte. Ltd., 1 Yishun Avenue 7, Singapore 768923. Avago Technologies General...

Visible Parts, Invisible Whole: Swedish Technology Student Teachers' Conceptions about Technological Systems

ERIC Educational Resources Information Center

Hallström, Jonas; Klasander, Claes

2017-01-01

Technological systems are included as a component of national technology curricula and standards for primary and secondary education as well as corresponding teacher education around the world. Little is known, however, of how pupils, students, and teachers conceive of technological systems. In this article we report on a study investigating…

Aerospace and Flight. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on aerospace and flight for students in grades 6-10 consists of a technology education overview, information on use, and instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor's and student's sections are…

Progression in Technology Education in New Zealand: Components of Practice as a Way Forward

ERIC Educational Resources Information Center

Compton, Vicki; Harwood, Cliff

2005-01-01

Understanding and undertaking technological practice is fundamental to student learning in technology education in New Zealand, and the enhancement of student technological literacy. The implementation of technology into New Zealand's core curriculum has reached the stage where it has become critical that learning programmes are based on student…

Initial Development of the Meaningful Learning with Technology Scale (MeLTS) for High-School Students

ERIC Educational Resources Information Center

Lee, Chwee Beng

2018-01-01

With the rapid developments in emerging technologies and the emphasis on technologies in learning environments, the connection between technologies and meaningful learning has strengthened. Developing an understanding of the components of meaningful learning with technology is pivotal, as this may enable educators to make more informed decisions…

Using principal components analysis to explore competence and confidence in student nurses as users of information and communication technologies.

PubMed

Todhunter, Fern

2015-07-01

To report on the relationship between competence and confidence in nursing students as users of information and communication technologies, using principal components analysis. In nurse education, learning about and learning using information and communication technologies is well established. Nursing students are one of the undergraduate populations in higher education required to use these resources for academic work and practice learning. Previous studies showing mixed experiences influenced the choice of an exploratory study to find out about information and communication technologies competence and confidence. A 48-item survey questionnaire was administered to a volunteer sample of first- and second-year nursing students between July 2008-April 2009. The cohort ( N  =   375) represented 18·75% of first- and second-year undergraduates. A comparison between this work and subsequent studies reveal some similar ongoing issues and ways to address them. A principal components analysis (PCA) was carried out to determine the strength of the correlation between information and communication technologies competence and confidence. The aim was to show the presence of any underlying dimensions in the transformed data that would explain any variations in information and communication technologies competence and confidence. Cronbach's alpha values showed fair to good internal consistency. The five component structure gave medium to high results and explained 44·7% of the variance in the original data. Confidence had a high representation. The findings emphasized the shift towards social learning approaches for information and communication technologies. Informal social collaboration found favour with nursing students. Learning through talking, watching and listening all play a crucial role in the development of computing skills.

Millimeter-wave MMIC technology for smart weapons

NASA Astrophysics Data System (ADS)

Seashore, Charles R.

1994-12-01

Millimeter wave MMIC component technology has made dramatic progress over the last ten years largely due to funding stimulation received under the ARPA Tri-Service MIMIC program. In several smart weapon systems, MMIC components are now specified as the baseline approach for millimeter wave radar transceiver hardware. Availability of this new frontier in microelectronics has also enabled realization of sensor fusion for multispectral capability to defeat many forms of known countermeasures. The current frequency range for these MMIC-based components is approximately 30 to 100 GHz. In several cases, it has been demonstrated that the MMIC component performance has exceeded that available from hybrid microstrip circuits using selected discrete devices. However, challenges still remain in chip producibility enhancement and cost reduction since many of the essential device structure candidates are themselves emerging technologies with a limited wafer fabrication history and accumulated test databases. It is concluded that smart weapons of the future will rely heavily on advanced microelectronics to satisfy performance requirements as well as meeting stringent packaging and power source constraints.

Flow Induced Vibration Program at Argonne National Laboratory

NASA Astrophysics Data System (ADS)

1984-01-01

The Argonne National Laboratory's Flow Induced Vibration Program, currently residing in the Laboratory's Components Technology Division is discussed. Throughout its existence, the overall objective of the program was to develop and apply new and/or improved methods of analysis and testing for the design evaluation of nuclear reactor plant components and heat exchange equipment from the standpoint of flow induced vibration. Historically, the majority of the program activities were funded by the US Atomic Energy Commission, the Energy Research and Development Administration, and the Department of Energy. Current DOE funding is from the Breeder Mechanical Component Development Division, Office of Breeder Technology Projects; Energy Conversion and Utilization Technology Program, Office of Energy Systems Research; and Division of Engineering, Mathematical and Geosciences, office of Basic Energy Sciences. Testing of Clinch River Breeder Reactor upper plenum components was funded by the Clinch River Breeder Reactor Plant Project Office. Work was also performed under contract with Foster Wheeler, General Electric, Duke Power Company, US Nuclear Regulatory Commission, and Westinghouse.