A microcosm of musical expression. I. Quantitative analysis of pianists' timing in the initial measures of Chopin's Etude in E major.

PubMed

Repp, B H

1998-08-01

Patterns of expressive timing were measured in bars 1-5 of 115 commercially recorded performances of Chopin's Etude in E major, op. 10, No. 3. These patterns were subjected to principal components analysis, which suggested at least four independent "timing strategies": (1) major ritards at the ends of melodic gestures; (2) acceleration within some of these gestures, without final ritards; (3) extreme lengthening of the initial downbeat; and (4) ritards between as well as within melodic gestures. Strategies 1 and 4 respond in different ways to the melodic-rhythmic grouping structure of the music, and strategy 3 merely represents a local emphasis. Strategy 2 is the one most difficult to rationalize; it does not seem to represent an alternative structural interpretation of the music but rather an alternative gestural shaping. Each individual pianist's timing pattern could be described as a weighted combination of these four strategies plus idiosyncratic variation. A wide variety of combinations was represented, and no two individual patterns were exactly the same. In addition, there was a wide range of basic tempi and of degrees of tempo modulation. There were no strong relationships between any of these variables and sociocultural characteristics of the artists, although some weak trends were observed.

Singing as a Therapeutic Agent, inThe Etude, 1891-1949.

PubMed

Hunter

1999-01-01

The Etude music magazine, founded by Theodore Presser, was one of a number of popular music magazines published in the years prior to the establishment of the music therapy profession in 1950. During its publication run from 1883 to 1957, over 100 music therapy related articles appeared, including 13 on the health benefits of singing published between 1891 and 1949. Written by authors with diverse backgrounds, such as the famous Battle Creek, Michigan physician John Harvey Kellogg and Boston music critic Louis C. Elson, the articles contained consistent and adamant support regarding the health benefits of singing. The advantages described were both physical and psychological, and were recommended prophylactically for well persons and therapeutically for ill persons. Although the articles varied in perspective, from philosophical to theoretical to pedagogical, there is a consistent holistic medicine theme that appeared almost ahead of its time and no doubt linked to the push for vocal music education in that era. The importance of The Etude in promulgating ideas that helped shape the early practice of music therapy should not be underestimated. For much of its publication run The Etude was the largest music periodical in print, reaching its peak circulation of 250,000 copies per month in 1924.

Loess in Europe—its spatial distribution based on a European Loess Map, scale 1:2,500,000

NASA Astrophysics Data System (ADS)

Haase, D.; Fink, J.; Haase, G.; Ruske, R.; Pécsi, M.; Richter, H.; Altermann, M.; Jäger, K.-D.

2007-05-01

The paper focuses on the concept, mapping and discussion of loess distribution in Western, Central and Eastern Europe at a scale of 1:2,500,000. The research work is based on studies and data compilation primarily carried out in the 1970s and 1980s [Fink, J., Haase, G., Ruske, R., 1977. Bemerkungen zur Lößkarte von Europe 1:2,5 Mio. Petermanns Geographische Mitteilungen 2(77), 81-94; Fink, J., 1969 Les progres de l' etude de loess en Europe. Bulletin de l' Association française pour l' etude du Quarternaire 3-12. Haase, G., Ruske, R., Fink, J., 1983. Conception, preparation and some results of the Loess Map of Europe on a scale 1:2,5 Million. INQUA Newsletter 1983(1), 7-10] and completed recently by additional material and literature references. Reference is also made to recent GIS-based data processing and visualisation techniques that were utilised for the final version of the European Loess Map. The paper provides an overview of the history of the conceptualisation of the map as well as on the loess study in Europe, and than considers the cartographic data on loess sediment formation and distribution in Europe. The classification of loess and loess-like sediments and their distribution throughout Europe as reproduced in the map are discussed [Haase, G., Lieberoth, I., Ruske, R., 1970. Sedimente und Paläoböden im Lössgürtel. In: Richter, H., Haase, G., Lieberoth, I., Ruske, R. (Eds.), Periglazial-Löß-Paläolithikum om JUngpleistozän der Deutschen Demokratischen Republik; Petermanns Geographische Mitteilungen 274, 99-212]. The paper illustrates the final state of the loess distribution map of Europe at a scale of 1:2,500,000 and the digital data references on which it is based. Some applications of the map are suggested.

Etude aerodynamique d'un jet turbulent impactant une paroi concave

NASA Astrophysics Data System (ADS)

LeBlanc, Benoit

Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent, tridimensionnel. Les nombres de Reynolds utilises dans l'etude numerique, bases sur le diametre du jet lineaire observe, sont de Red = 3333 et 6667, consideres comme etant en transition vers la turbulence. Dans cette etude, un montage numerique est construit. Le maillage, le schema numerique, les conditions frontiere et la discretisation sont discutes et choisis. Les resultats sont ensuite valides avec des donnees turbulentes experimentales. En modelisation numerique de turbulence, les modeles de Moyennage Reynolds des Equations Naviers Stokes (RANS) presentent des difficultes avec des ecoulements instationnaires en regime transitionnel. La Simulation des Grandes Echelles (LES) presente une solution plus precise, mais au cout encore hors de portee pour cette etude. La methode employee pour cette etude est la Simulation des Tourbillons Detaches (DES), qui est un hybride des deux methodes (RANS et LES). Pour analyser la topologie de l'ecoulement, la decomposition des modes propres (POD) a ete egalement ete effectuee sur les resultats numeriques. L'etude a demontre d'abord le temps de calcul relativement eleve associe a des essais DES pour garder le nombre de Courant faible. Les resultats numeriques ont cependant reussi a reproduire correctement le basculement asynchrone observe dans les essais experimentaux. Le basculement observe semble etre cause par des effets transitionnels, ce qui expliquerait la difficulte des modeles RANS a correctement reproduire l'aerodynamique de l'ecoulement. L'ecoulement du jet, a son tour, est pour la plupart du temps tridimensionnel et turbulent sauf pour de courtes periodes de temps stable et independant de la troisieme dimension. L'etude topologique de l'ecoulement a egalement permit la reconaissances de structures principales sousjacentes qui etaient brouillees par la turbulence. Mots cles : jet impactant, paroi concave, turbulence, transitionnel, simulation des tourbillons detaches (DES), OpenFOAM.

The origins, early development and status of Bourdieu's concept of 'cultural capital'.

PubMed

Robbins, Derek

2005-03-01

The paper examines the context of the first introduction of the concept of 'cultural capital' in the sociology of education analyses undertaken in the early 1960s and published by Bourdieu in collaboration with Jean-Claude Passeron in 'Les etudiants et leurs etudes' (1964a) and Les Heritiers (1964b). It first considers the cultural contexts within which Bourdieu's thinking about culture originated--both in relation to his social origins and in relation to his intellectual training. It then examines the extent to which Bourdieu's early anthropological research in Algeria was influenced by his knowledge of American acculturation theory. It concludes that Bourdieu sought to use acculturation theory in a distinctive way--one which he articulated more confidently as he explored the relationship between agency and structural explanation in the late 1960s and early 1970s. The specific educational researches which stimulated the articulation of the concept of 'linguistic' or 'cultural' capital belonged to the period in which Bourdieu was only just beginning to refine his post-structuralist philosophy of social scientific explanation. To use these concepts now involves deploying them reflexively in accordance with Bourdieu's later thinking rather than at face value as they were first developed during the period in which he and Passeron were 'apprentice' researchers.

A Concept for In-space, System-level Validation of Spacecraft Precision Formation Flying

NASA Technical Reports Server (NTRS)

Leitner, Jesse; Carpenter, J. Russell; Naasz, Bo J.; Scharf, Daniel P.; Hadaegh, Fred Y.; Ahmed, Asif

2007-01-01

A number of international space agencies and organizations, to include the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), and the Centre National d'Etudes Spatiales (CNES), to name a few, have embraced the concept of spacecraft formation flying to revolutionize the capabilities of astronomy and Earth remote sensing from space. The concept has been around well over a decade and a wide array of technologies and capabilities have been developed to enable multiple spacecraft to collaborate in a highly-coupled manner as would be required for a formation flying mission. Furthermore, many relevant capabilities for formation flying have been demonstrated in the area of rendezvous and docking, loosely-controlled formations, and in missions with collaborating spacecraft with very precise metrology. .However, in considering the case of precision formation flying (PFF), i.e, when the relative geometry of multiple vehicles must be controlled on-board in a continuous and precise manner, there have been several missions proposed, but the realization in space has not yet occurred due to a range of issues. This paper will briefly examine those issues and present a concept for demonstrating a core capability for performing PFF, necessary for virtually any PFF mission concept, that will help to overcome the problems encountered in prior attempts and help to allay the risks to enable future PFF science missions.

Actes du colloque sur le bilinguisme, Universite de Neuchatel, 14/15 Septembre, 1981 (Proceedings of the Colloquium on Bilingualism, University of Neuchatel, September 14-15, 1981).

ERIC Educational Resources Information Center

TRANEL, 1982

1982-01-01

This issue contains proceedings of a colloquium on linguistics at the University of Neuchatel: (1) "Propositions epistemologiques pour une etude du bilinguisme (Epistemological Propositions for a Study of Bilingualism)," by B. Py; (2) "Comment on di ca? Prolegomenes a une etude de la composante semantique du langage des migrants (How Do You Say…

Programmable wide field spectrograph for earth observation

NASA Astrophysics Data System (ADS)

Zamkotsian, Frédéric; Lanzoni, Patrick; Liotard, Arnaud; Viard, Thierry; Costes, Vincent; Hébert, Philippe-Jean

2017-11-01

In Earth Observation, Universe Observation and Planet Exploration, scientific return of the instruments must be optimized in future missions. Micro-Opto-Electro-Mechanical Systems (MOEMS) could be key components in future generation of space instruments. These devices are based on the mature micro-electronics technology and in addition to their compactness, scalability, and specific task customization, they could generate new functions not available with current technologies. French and European space agencies, the Centre National d'Etudes Spatiales (CNES) and the European Space Agency (ESA) have initiated several studies with LAM and TAS for listing the new functions associated with several types of MEMS, and developing new ideas of instruments.

Plates-formes de microscopie et fluorescence par resonance de plasmons de surface appliquees a l'imagerie cellulaire

NASA Astrophysics Data System (ADS)

Chabot, Vincent

L'elaboration de nouveaux medicaments repose sur les etudes pharmacologiques, dont le role est d'identifier de nouveaux composes actifs ou de nouvelles cibles pharmacologiques agissant entre autres au niveau cellulaire. Recemment, la detection basee sur la resonance des plasmons de surface (SPR) a ete appliquee a l'etude de reponses cellulaires. Cette methode de detection, permettant d'observer des variations d'indice de refraction associes a de faibles changements de masse a la surface d'un metal, a l'avantage de permettre l'etude d'une population de cellules vivantes en temps reel, sans necessiter l'introduction d'agents de marquage. Pour effectuer la detection au niveau de cellules individuelles, on peut employer la microscopie SPR, qui consiste a localiser spatialement la detection par un systeme d'imagerie. Cependant, la detection basee sur la SPR est une mesure sans marquage et les signaux mesures sont attribues a une reponse moyennee des differentes sources cellulaires. Afin de mieux comprendre et identifier les composantes cellulaires generant le signal mesure en SPR, il est pertinent de combiner la microscopie SPR avec une modalite complementaire, soit l'imagerie de fluorescence. C'est dans cette problematique que s'insere ce projet de these, consistant a concevoir deux plates-formes distinctes de microscopie SPR et de fluorescence optimisees pour l'etude cellulaire, de sorte a evaluer les possibilites d'integration de ces deux modalites en un seul systeme. Des substrats adaptes pour chaque plate-forme ont ete concus et realises. Ces substrats employaient une couche d'argent passivee par l'ajout d'une mince couche d'or. La stabilite et la biocompatibilite des substrats ont ete validees pour l'etude cellulaire. Deux configurations permettant d'ameliorer la sensibilite en sondant les cellules plus profondement ont ete evaluees, soit l'emploi de plasmons de surface a longue portee et de guides d'onde a gaine metallique. La sensibilite accrue de ces configurations a aussi ete demontree pour un usage en biodetection cellulaire. Une plate-forme permettant de mesurer la spectroscopie SPR simultanement avec l'acquisition d'images de fluorescence a ete realisee. Cette plate-forme a ensuite ete validee par l'etude de reponses cellulaires suite a une stimulation pharmacologique. Puis, un systeme base sur la microscopie SPR a ete concu et caracterise. Son emploi pour l'etude de reponses au niveau de cellules individuelles a ete demontre. Finalement, les forces et faiblesses des substrats et des plates-formes realisees au cours de la these ont ete evaluees. Des possibilites d'amelioration sont mises de l'avant et l'integration des modalites de microscopie SPR et de fluorescence suite aux travaux de la these est discutee. Les realisations au cours de cette etude ont donc permis d'identifier les composantes cellulaires impliquees dans la generation du signal mesure en biodetection SPR. Mots-cles : Resonance des plasmons de surface, microscopie SPR, plasmons de surface a longue portee LRSPR, guide d'onde a gaine metallique MCWG, fluorescence exaltee par plasmons de surface SPEF, biodetection cellulaire, imagerie SPR.

Hazard Studies for Solid Propellant Rocket Motors (Etude des Risque pour les Moteurs-Fusees a Propergols Solides)

DTIC Science & Technology

1990-09-01

RESEARCH AND DEVELOPMENT (ORGANISATION DU TRAITE DE LATIANTIOUF NORD) AGARDograph No.3 16 Hazard Studies for Solid Propellant Rocket Motors (Etudes de...member nations to use their research and development capabilities for the common benefit of the NATO community; - Providing scientific and technical...advice and assistance to the Military Committee in the field of aerospace research and development (with particular regard to its military application

Reanalysis of European Flight Loads Data

DTIC Science & Technology

1994-05-01

DATA 6. Pulornig Ogaiation Cods 7. Authus) 8. Peronming Organization Report No. J. B. de Jonge, P.A. Hol and P.A. van Gelder NLR TP 93�L 9...containing data on aircraft operated by British Airways was obtained from the Office National d’etudes et de researches aerospatiales in France. A database...by British Airways. This data base was kept at Office National d’etudes et de recherches aerospatiales (ONERA) and was acquired from that institute

Theoretical and Experimental Methods in Hypersonic Flows (Les Methodes Theoriques et Experimentales pour l’Etude Des Ecoulements Hypersoniques)

DTIC Science & Technology

1993-04-01

PROCEEDINGS 514 OELECTE f Theoretical and A U Experimental Methods in A Hypersonic Flows (Les Methodes Th6oriques et Experimentales pour 1’Etude des...nitrogen ent for both equilibrium and non -equilibrium chemistry between the two groups . Both groups state that the boundary makes this mode even more...flowfield on control is also m?,ndatory unstable due to the necessary oblate shape of Hermes. when the experimental rebuilding is clearly poor and

Etude de l'influence de la temperature et de l'humidite sur les proprietes mecaniques en traction des fibres de chanvre et de coco

NASA Astrophysics Data System (ADS)

Ho Thi, Thu Nga

L'objectif de cette etude fut d'etablir l'effet de l'humidite et de la temperature sur la resistance en traction et le module elastique des fibres de chanvre et de coco. Deux etudes ont ete realisees afin d'atteindre cet objectif. La premiere vise l'absorption de l'humidite dans ces fibres en exposition dans l'air (de 0%RH a 80%RH) ainsi que l'absorption de l'eau dans ces fibres immergees dans l'eau aux differentes temperatures. La deuxieme consiste a mesurer la resistance en traction et le module elastique de ces fibres sous differentes conditions d'humidite et de temperature. En basant sur les resultats experimentaux obtenus, les methodes semi empiriques et de reseaux de neurones ont ete utilisees pour but de predire les proprietes en traction (resistance et module d'elasticite) des fibres de chanvre et de coco sous l'influence de l'humidite et de la temperature.

Etude exploratoire des conceptions de la circulation sanguine aupres d'eleves de l'ordre collegial

NASA Astrophysics Data System (ADS)

Robitaille, Jean-Marc

Il existe peu d'etudes sur les conceptions touchant les domaines de la biologie, notamment sur les conceptions de la circulation sanguine Nous avons observe egalement l'absence de recherche menee aupres d'eleves de l'ordre collegial sur cette question. Nous avons voulu combler une lacune en menant une recherche sur les conceptions de la circulation sanguine aupres d'eleves de l'ordre collegial. Pour mener cette recherche nous nous sommes inspires d'une methode developpee par Treagust (1988). Le premier niveau de formulation didactique etablit l'architecture du systeme et la fonction nutritive de la circulation. Le second niveau de formulation didactique decrit et relie les parametres de la dynamique de la circulation et leur relation: Pression, Debit et Resistance. Le troisieme niveau de formulation didactique s'interesse au controle de la circulation du sang dans un contexte d'homeostasie qui implique la regulation de la pression arterielle. Nous avons construit un questionnaire en nous guidant sur les niveaux de formulation didactique et l'analyse des entrevues menees aupres de dix-huit eleves, representatifs de la population cible. Ce questionnaire fut administre a un echantillon de 2300 eleves disperses dans six colleges de la region de Montreal. Notre echantillon comprend des eleves inscrits a des programmes de l'ordre collegial en Sciences de la nature et en Techniques de la sante et qui n'ont pas suivi le cours sur la circulation sanguine. Notre analyse des reponses des eleves de notre echantillon aux questions sur le premier niveau de formulation didactique revele que la majorite des eleves considerent que le systeme circulatoire relie les organes les uns aux autres dans un circuit en serie. Notre analyse revele egalement que la majorite des eleves estiment que les nutriments sont extraits du sang par les organes selon un processus de selection base sur les besoins determines par la fonction de l'organe. Ces besoins sont differents selon les organes qui ne prelevent que les nutriments necessaires. Au second niveau les reponses des eleves de la population indiquent une conception de la dynamique cardio-vasculaire axee d'abord sur le coeur, laissant aux vaisseaux un role passif de canaux. Ces reponses indiquent egalement que la dynamique circulatoire est reduite a une sequence d'etapes ponctuelles sans relation les unes avec les autres. Au troisieme niveau les reponses des eleves de la population font etat d'une conception du controle qui privilegie la satisfaction de besoins locaux, sans relation systemique. Nos resultats suggerent que les eleves de notre echantillon affichent une plus grande concordance avec l'expert pour les questions du premier niveau (70%) que pour les niveaux II (54%) et III (50%). Notre analyse des donnees revele que l'accord avec l'expert est eleve lorsque la questions touchent la description des structures et la definition de leurs roles et plus faible lorsque les questions touchent la dynamique et le controle. Il existerait donc un niveau de formulation qui correspond a la description de structures et un autre niveau qui recoupe toute la dynamique de la circulation et son controle. Du point de vue didactique lanalyse des donnees suggere que nous ne retrouvons pas une correspondance entre les niveaux de formulation didactique et les conceptions des eleves. (Abstract shortened by UMI.)

Structural Basis for Methylarginine-dependent Recognition of Aubergine by Tudor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, H.; Wang, J; Huang, Y

2010-01-01

Piwi proteins are modified by symmetric dimethylation of arginine (sDMA), and the methylarginine-dependent interaction with Tudor domain proteins is critical for their functions in germline development. Cocrystal structures of an extended Tudor domain (eTud) of Drosophila Tudor with methylated peptides of Aubergine, a Piwi family protein, reveal that sDMA is recognized by an asparagine-gated aromatic cage. Furthermore, the unexpected Tudor-SN/p100 fold of eTud is important for sensing the position of sDMA. The structural information provides mechanistic insights into sDMA-dependent Piwi-Tudor interaction, and the recognition of sDMA by Tudor domains in general.

First results of the PERSEE experiment

NASA Astrophysics Data System (ADS)

Le Duigou, J.-M.; Lozi, J.; Cassaing, F.; Houairi, K.; Sorrente, B.; Montri, J.; Jacquinod, S.; Reess, J.-M.; Pham, L.; Lhomé, E.; Buey, T.; Hénault, F.; Marcotto, A.; Girard, P.; Mauclert, N.; Barillot, M.; Coudé du Foresto, V.; Ollivier, M.

2017-11-01

Although it has been recently postponed due to high cost and risks, nulling interferometry in space remains one of the very few direct detection methods able to characterize extrasolar planets and particularly telluric ones. Within this framework, several projects such as DARWIN [1], [2], TPF-I [3], [4], FKSI [5] or PEGASE [6], [7], have been proposed in the past years. Most of them are based on a free flying concept. It allows firstly to avoid atmosphere turbulence, and secondly to distribute instrumental function over many satellites flying in close formation. In this way, a very high angular resolution can be achieved with an acceptable launch mass. But the price to pay is to very precisely position and stabilize relatively the spacecrafts, in order to achieve a deep and stable extinction of the star. Understanding and mastering all these requirements are great challenges and key issues towards the feasibility of these missions. Thus, we decided to experimentally study this question and focus on some possible simplifications of the concept. Since 2006, PERSEE (PEGASE Experiment for Research and Stabilization of Extreme Extinction) laboratory test bench is under development by a consortium composed of Centre National d'Etudes Spatiales (CNES), Institut d'Astrophysique Spatiale (IAS), Observatoire de Paris-Meudon (LESIA), Observatoire de la Côte d'Azur (OCA), Office National d'Etudes et de Recherches Aérospatiales (ONERA), and Thalès Alénia Space (TAS) [8]. It is mainly funded by CNES R&D. PERSEE couples an infrared wide band nulling interferometer with local OPD and tip/tilt control loops and a free flying Guidance Navigation and Control (GNC) simulator able to introduce realistic disturbances. Although it was designed in the framework of the PEGASE free flying space mission, PERSEE can adapt very easily to other contexts like FKSI (in space, with a 10 m long beam structure) or ALADDIN [9] (on ground, in Antarctica) because the optical designs of all those missions are very similar. After a short description of the experimental setup, we will present first the results obtained in an intermediate configuration with monochromatic light. Then we will present some preliminary results with polychromatic light. Last, we discuss some very first more general lessons we can already learn from this experiment.

Scalable Power-Component Models for Concept Testing

DTIC Science & Technology

2011-08-17

Scalable Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release 2011 NDIA GROUND VEHICLE...Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release Page 2 of 8 technology that has yet...Technology Symposium (GVSETS) Scalable Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release

The Relationship among Self-Concept, Self-Efficacy, and Performance in Mathematics during Secondary School.

ERIC Educational Resources Information Center

Pietsch, James; Walker, Richard; Chapman, Elaine

2003-01-01

Examines the relationship among self-concept, self-efficacy, and performance in mathematics among 416 high school students. Confirmatory factor analyses supported the existence of two self-concept components--a competency component and an affective component. Self-efficacy items and the competency items of self-concept also loaded on a single…

The right to health, health systems development and public health policy challenges in Chad.

PubMed

Azétsop, Jacquineau; Ochieng, Michael

2015-02-15

There is increasing consensus that the right to health can provide ethical, policy and practical groundings for health systems development. The goals of the right to health are congruent with those of health systems development, which are about strengthening health promotion organizations and actions so as to improve public health. The poor shape and performance of health systems in Chad question the extent of realization of the right to health. Due to its comprehensiveness and inclusiveness, the right to health has the potential of being an organizational and a normative backbone for public health policy and practice. It can then be understood and studied as an integral component of health systems development. This paper uses a secondary data analysis of existing documents by the Ministry of Public Health, Institut National de la Statistique, des Etudes Economiques et Démographiques (INSEED), the Ministry of Economy and Agence Française de Cooperation to analyze critically the shape and performance of health systems in Chad based on key concepts and components of the right to health contained in article 12 of the International Covenant on Economic, Social and Cultural Rights, and on General Comment 14. The non-realization of the right to health, even in a consistently progressive manner, raises concerns about the political commitment of state officials to public health, about the justice of social institutions in ensuring social well-being and about individual and public values that shape decision-making processes. Social justice, democratic rule, transparency, accountability and subsidiarity are important groundings for ensuring community participation in public affairs and for monitoring the performance of public institutions. The normative ideals of health systems development are essentially democratic in nature and are rooted in human rights and in ethical principles of human dignity, equality, non-discrimination and social justice. These ideals are grounded in an integrated vision of society as a place for multi-level interactions, where government plays its role by equitably providing institutions and services that ensure people's welfare. Inter-sectoral collaboration, which calls for a conceptual shift in health and public policy, can be instrumental in improving health systems through concerted efforts of various governmental institutions and civil society.

The Large UV/Optical/Infrared Surveyor (LUVOIR): Decadal Mission concept design update

NASA Astrophysics Data System (ADS)

Bolcar, Matthew R.; Aloezos, Steve; Bly, Vincent T.; Collins, Christine; Crooke, Julie; Dressing, Courtney D.; Fantano, Lou; Feinberg, Lee D.; France, Kevin; Gochar, Gene; Gong, Qian; Hylan, Jason E.; Jones, Andrew; Linares, Irving; Postman, Marc; Pueyo, Laurent; Roberge, Aki; Sacks, Lia; Tompkins, Steven; West, Garrett

2017-09-01

In preparation for the 2020 Astrophysics Decadal Survey, NASA has commissioned the study of four large mission concepts, including the Large Ultraviolet / Optical / Infrared (LUVOIR) Surveyor. The LUVOIR Science and Technology Definition Team (STDT) has identified a broad range of science objectives including the direct imaging and spectral characterization of habitable exoplanets around sun-like stars, the study of galaxy formation and evolution, the epoch of reionization, star and planet formation, and the remote sensing of Solar System bodies. NASA's Goddard Space Flight Center (GSFC) is providing the design and engineering support to develop executable and feasible mission concepts that are capable of the identified science objectives. We present an update on the first of two architectures being studied: a 15- meter-diameter segmented-aperture telescope with a suite of serviceable instruments operating over a range of wavelengths between 100 nm to 2.5 μm. Four instruments are being developed for this architecture: an optical / near-infrared coronagraph capable of 10-10 contrast at inner working angles as small as 2 λ/D the LUVOIR UV Multi-object Spectrograph (LUMOS), which will provide low- and medium-resolution UV (100 - 400 nm) multi-object imaging spectroscopy in addition to far-UV imaging; the High Definition Imager (HDI), a high-resolution wide-field-of-view NUV-Optical-IR imager; and a UV spectro-polarimeter being contributed by Centre National d'Etudes Spatiales (CNES). A fifth instrument, a multi-resolution optical-NIR spectrograph, is planned as part of a second architecture to be studied in late 2017.

Introduction A l'Etude de la Médecine Expérimentale--surgical revolution part II.

PubMed

Toledo-Pereyra, Luis H

2009-01-01

The book that Claude Bernard (1813-1878) published in 1865, the Introduction à l'Etude de la Médecine Expérimentale, fostered a revolution that we believe influenced the practice of surgery when the discipline became a scientific enterprise. In Part I, we set the stage by presenting the life and accomplishments of Bernard, by reviewing his science, and introducing his experimental medicine work. In this issue in Part II, we further analyze his book and determine the "why" of a genuine surgical revolution. What were the factors that generated this revolution, and how a new generation of surgeons learned to become better researchers, and thus better surgeons, were the main objectives of this work. Science, research, and surgery became highly intertwined and the surgeon pursued these fields of knowledge more effectively.

Etude de faisabilite d'un systeme eolien diesel avec stockage d'air comprime

NASA Astrophysics Data System (ADS)

Benchaabane, Youssef

Le Systeme Hybride Eolien-Diesel avec Stockage d'Air Comprime (SHEDAC) utilise l'hybridation pneumatique pour remplacer la consommation des combustibles fossiles par de l'energie renouvelable, plus particulierement de l'energie eolienne. Le surplus de l'energie eolienne est utilise pour comprimer et stocker de l'air qui est utilise ensuite pour suralimenter le moteur diesel. Le memoire de maitrise est constitue de deux articles scientifiques. Le premier article presente le developpement d'un logiciel dedie a l'etude de faisabilite d'un systeme eolien-diesel avec stockage d'air comprime. Cette etude est basee sur l'analyse des couts et des revenus, des couts des equipements (eolienne, moteur diesel, systeme de stockage d'air). Elle est completee par une analyse de sensibilite aux differents parametres, une analyse des risques et des emissions des gaz a effet de serre (GES). Le deuxieme article est une application de ce logiciel pour l'installation d'un systeme SHEDAC au camp minier Esker au Quebec en remplacement des sources actuelles de production d'energie. L'utilisation du stockage d'air comprime a l'aide d'un systeme SHEDAC est le plus rentable par rapport a l'utilisation de l'energie eolienne seule ou d'une centrale thermique au diesel seule ou des deux combinees. Avec une valeur actuelle nette et un taux de rendement interne plus eleves, cette solution permet d'obtenir le plus bas cout de l'energie pour cette region eloignee. None None None

Immagini e Concetti in Geometria=The Figural and the Conceptual Components of Geometrical Concepts.

ERIC Educational Resources Information Center

Mariotti, Maria Alessandra

1992-01-01

Discusses geometrical reasoning in the framework of the theory of Figural Concepts to highlight the interaction between the figural and conceptual components of geometrical concepts. Examples of students' difficulties and errors in geometrical reasoning are interpreted according to the internal tension that appears in figural concepts resulting…

Wedge filter imaging spectrometer

NASA Astrophysics Data System (ADS)

Bernardi, Pernelle; Bonafous, M.; Motisi, M.; Reess, J.-M.; Tanrin, J.; Laubier, D.

2017-11-01

LESIA (Laboratoire d'Etudes Spatiales et d'Instrumentation en Astrophysique, Observatoire de Paris-Meudon) has an extensive experience in visible and infrared imaging spectrometry with several instruments onboard planetary space missions (MarsExpress/OMEGA, VenusExpress/VIRTIS, Rosetta/VIRTIS).

26 CFR 1.1563-1 - Definition of controlled group of corporations and component members and related concepts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and component members and related concepts. 1.1563-1 Section 1.1563-1 Internal Revenue INTERNAL... related concepts. (a) Controlled group of corporations—(1) In general—(i) Types of controlled groups. For...) Additional concepts used in applying the controlled group rules. (A) The term testing date means the date...

Official portrait of STS-65 backup Payload Specialist Jean-Jacques Favier

NASA Image and Video Library

1993-09-30

Official portrait of STS-65 International Microgravity Laboratory 2 (IML-2) backup Payload Specialist Jean-Jacques Favier. Favier is a member of the Centre National D'Etudes Spatiales (CNES), the French space agency.

French research program on the physiological problems caused by weightlessness. Use of the primate model

NASA Astrophysics Data System (ADS)

Pesquies, P. C.; Milhaud, C.; Nogues, C.; Klein, M.; Cailler, B.; Bost, R.

The need to acquire a better knowledge of the main biological problems induced by microgravity implies—in addition to human experimentation—the use of animal models, and primates seem to be particularly well adapted to this type of research. The major areas of investigation to be considered are the phospho-calcium metabolism and the metabolism of supporting tissues, the hydroelectrolytic metabolism, the cardiovascular function, awakeness, sleep-awakeness cycles, the physiology of equilibrium and the pathophysiology of space sickness. Considering this program, the Centre d'Etudes et de Recherches de Medecine Aerospatiale, under the sponsorship of the Centre National d'Etudes Spatiales, developed both a program of research on restrained primates for the French-U.S. space cooperation (Spacelab program) and for the French-Soviet space cooperation (Bio-cosmos program), and simulation of the effects of microgravity by head-down bedrest. Its major characteristics are discussed in the study.

Fractal dimension analysis of complexity in Ligeti piano pieces

NASA Astrophysics Data System (ADS)

Bader, Rolf

2005-04-01

Fractal correlation dimensional analysis has been performed with whole solo piano pieces by Gyrgy Ligeti at every 50ms interval of the pieces. The resulting curves of development of complexity represented by the fractal dimension showed up a very reasonable correlation with the perceptional density of events during these pieces. The seventh piece of Ligeti's ``Musica ricercata'' was used as a test case. Here, each new part of the piece was followed by an increase of the fractal dimension because of the increase of information at the part changes. The second piece ``Galamb borong,'' number seven of the piano Etudes was used, because Ligeti wrote these Etudes after studying fractal geometry. Although the piece is not fractal in the strict mathematical sense, the overall structure of the psychoacoustic event-density as well as the detailed event development is represented by the fractal dimension plot.

On the locating-chromatic number for graphs with two homogenous components

NASA Astrophysics Data System (ADS)

Welyyanti, Des; Baskoro, Edy Tri; Simajuntak, Rinovia; Uttunggadewa, Saladin

2017-10-01

The locating-chromatic number of a graph was introduced by Chartrand et al. in 2002. The concept of the locating-chromatic number is a marriage between graph coloring and the notion of graph partition dimension. This concept is only for connected graphs. In [8], we extended this concept also for disconnected graphs. In this paper, we determine the locating- chromatic number of a graph with two components. In particular, we determine such values if the components are homogeneous and each component has locating-chromatic number 3.

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

Development of reversible jump Markov Chain Monte Carlo algorithm in the Bayesian mixture modeling for microarray data in Indonesia

NASA Astrophysics Data System (ADS)

Astuti, Ani Budi; Iriawan, Nur; Irhamah, Kuswanto, Heri

2017-12-01

In the Bayesian mixture modeling requires stages the identification number of the most appropriate mixture components thus obtained mixture models fit the data through data driven concept. Reversible Jump Markov Chain Monte Carlo (RJMCMC) is a combination of the reversible jump (RJ) concept and the Markov Chain Monte Carlo (MCMC) concept used by some researchers to solve the problem of identifying the number of mixture components which are not known with certainty number. In its application, RJMCMC using the concept of the birth/death and the split-merge with six types of movement, that are w updating, θ updating, z updating, hyperparameter β updating, split-merge for components and birth/death from blank components. The development of the RJMCMC algorithm needs to be done according to the observed case. The purpose of this study is to know the performance of RJMCMC algorithm development in identifying the number of mixture components which are not known with certainty number in the Bayesian mixture modeling for microarray data in Indonesia. The results of this study represent that the concept RJMCMC algorithm development able to properly identify the number of mixture components in the Bayesian normal mixture model wherein the component mixture in the case of microarray data in Indonesia is not known for certain number.

Un accumulateur echangeur de chaleur hybride pour la gestion simultanee des energies solaire et electrique

NASA Astrophysics Data System (ADS)

Ait Hammou, Zouhair

Cette etude porte sur la conception d'un accumulateur echangeur de chaleur hybride (AECH) pour la gestion simultanee des energies solaire et electrique. Un modele mathematique reposant sur les equations de conservation de la quantite d'energie est expose. Il est developpe pour tester differents materiaux de stockage, entre autres, les materiaux a changement de phase (solide/liquide) et les materiaux de stockage sensible. Un code de calcul est mis en eeuvre sur ordinateur, puis valide a l'aide des resultats analytiques et numeriques de la litterature. En parallele, un prototype experimental a echelle reduite est concu au laboratoire afin de valider le code de calcul. Des simulations sont effectuees pour etudier les effets des parametres de conception et des materiaux de stockage sur le comportement thermique de l'AECH et sur la consommation d'energie electrique. Les resultats des simulations sur quatre mois d'hiver montrent que la paraffine n-octadecane et l'acide caprique sont deux candidats souhaitables pour le stockage d'energie destine au chauffage des habitats. L'utilisation de ces deux materiaux dans l'AECH permet de reduire la consommation d'energie electrique de 32% et d'aplanir le probleme de pointe electrique puisque 90% de l'energie electrique est consommee durant les heures creuses. En plus, en adoptant un tarif preferentiel, le calcul des couts lies a la consommation d'energie electrique montre que le consommateur adoptant ce systeme beneficie d'une reduction de 50% de la facture d'electricite.

Predictive validity of Perceived Emotional Intelligence on nursing students' self-concept.

PubMed

Augusto Landa, José María; López-Zafra, Esther; Aguilar-Luzón, Maria del Carmen; de Ugarte, Maria Fe Salguero

2009-10-01

This study examines the role of Perceived Emotional Intelligence, in nursing students' self-concept, controlling personality dimensions. Self-image is a cognitive component of the self that contains images of who we are, what we want to be and what we express and wish to express to others. Likewise, there is also an emotional and assessable component known as self-esteem. For a profession that requires not only technical expertise but also psychologically oriented care, knowledge about the self in nursing would be crucial to further development and growth of the profession. However, the role of emotions in the formation of nursing professionals has been scarcely studied. One hundred and thirty five undergraduates from nursing studies voluntarily participated in our study. They completed a questionnaire that comprises several scales. Our results show positive correlations between the Clarity and Emotional Repair components of Perceived Emotional Intelligence and all scales of the self-concept scale. Furthermore, we found positive relationships between the Extraversion and Accountability components of personality with almost all the scales of the self-concept and negative relationships with personality and neuroticism components of the self-concept.

French payload specialist Patrick Baudry prepares a meal

NASA Image and Video Library

1985-06-17

51G-08-021 (17-24 June 1985) --- Patrick Baudry, payload specialist representing the Centre National d'Etudes Spatiales of France, prepares to open a can of lobster. The bag attached to a nearby locker door appears to contain several other French snacks.

Des journees d'etudes sur les techniques d'expression (Days of Study on Expression Techniques)

ERIC Educational Resources Information Center

Roumette, Sylvain

1975-01-01

Describes the discussions which took place at a two-day conference on the instruction of expression techniques. Discussion centered around the role of linguistics, of the media, and of psychological factors. (Text is in French.) (AM)

Spall Strength of Tungsten Carbide

DTIC Science & Technology

2004-09-01

1 PCS GROUP CAVENDISH LABORATORY W G PROUD MADINGLEY RD CAMBRIDGE UNITED KINGDOM 1 CENTRE D ETUDES DE GRAMAT J Y TRANCHET...46500 GRAMAT FRANCE 1 MINISTERE DE LA DEFENSE DR G BRAULT DGA DSP STTC 4 RUE DE LA PORTE DISSY 75015 PARIS FRANCE 1 SPART

Stochastic Pseudo-Boolean Optimization

DTIC Science & Technology

2011-07-31

Right-Hand Side,” 2009 IN- FORMS Annual Meeting, San Diego, CA, October 11-14, 2009. 113 References [1] A.-Ghouila-Houri. Caracterisation des matrices...Optimization, 10:7–21, 2005. [30] P. Camion. Caracterisation des matrices unimodulaires. Cahiers Centre Etudes Rech., 5(4), 1963. [31] P. Camion

A New Approach to Electrical Characterization of Exploding Foil Initiators

DTIC Science & Technology

1998-12-01

processed to illustrate the methodology. RESUME Dans une etude precedente de 1a caracterisation electrique des detonateurs a element projete (DEP), on a...applicable a 1a caracterisation electrique des DEP et decrit la methodologie experimentale adequate. Cette methodologie est illustree par la

Etude spectroscopique des collisions moleculaires (hydrogene-azote et hydrogene-oxygene) a des energies de quelques MeV

NASA Astrophysics Data System (ADS)

Plante, Jacinthe

1998-09-01

Les resultats presentes ici proviennent d'une etude systematique portant sur les collisions a vitesse constante, entre les projectiles d'hydrogene (H+, H2+ et H3+ a 1 MeV/nucleon) et deux cibles gazeuses (N2 et O2), soumises a differentes pressions. Les collisions sont analysees a l'aide des spectres d'emission (de 400 A a 6650 A) et des graphiques intensite/pression. Les spectres ont revele la presence des raies d'azote atomique, d'azote moleculaire, d'oxygene atomique, d'oxygene moleculaire et d'hydrogene atomique. Les raies d'hydrogene sont observees seulement avec les projectiles H2+ et H3+. Donc les processus responsables de la formation de ces raies sont des mecanismes de fragmentation des projectiles. Pour conclure, il existe une difference notable entre les projectiles et les differentes pressions. Les raies d'azote et d'oxygene augmentent selon la pression et les raies d'hydrogene atomique presentent une relation non lineaire avec la pression.

Domain-Specificity of Self-Concept and Parent Expectation Influences on Short-Term and Long-Term Learning of Physics

ERIC Educational Resources Information Center

Yeung, Alexander Seeshing; Kuppan, Loganantham; Foong, See Kit; Wong, Darren Jon Sien; Kadir, Munirah Shaik; Lee, Paul Choon Keat; Yau, Che Ming

2010-01-01

Background: Students' academic self-concepts are known to be domain specific. Researchers have also identified two related components of self-concept:cognitive (how competent students feel about a subject domain) and affective (their interest in the subject). This paper examines whether both components are domain specific. Research has also shown…

Fuel-Air Explosive Simulation of Far-Field Nuclear Airblasts.

DTIC Science & Technology

1979-12-31

Blastwave Simulator," Sixieme Symposium International sur Les A19 plications Militaires de La Simulation de Souffle, Centre D’Etudes de Gramat , Gramat ... Gramat , Gramat , France, p. 4.2.1, June 1979. 207 7............................. 64. Cooperwaithe, M. and Zwisler, W. H., "TIGER Computer Program

Reconstruction de la surface de Fermi dans l'etat normal d'un supraconducteur a haute Tc: Une etude du transport electrique en champ magnetique intense

NASA Astrophysics Data System (ADS)

Le Boeuf, David

Des mesures de resistance longitudinale et de resistance de Hall en champ magnetique intense transverse (perpendiculaire aux plans CuO2) ont ete effectuees au sein de monocristaux de YBa2Cu3Oy (YBCO) demacles, ordonnes et de grande purete, afin d'etudier l'etat fondamental des supraconducteurs a haute Tc dans le regime sous-dope. Cette etude a ete realisee en fonction du dopage et de l'orientation du courant d'excitation J par rapport a l'axe orthorhombique b de la structure cristalline. Les mesures en champ magnetique intense revelent par suppression de la supraconductivite des oscillations magnetiques des resistances longitudinale et de Hall dans YBa2Cu 3O6.51 et YBa2Cu4O8. La conformite du comportement de ces oscillations quantiques au formalisme de Lifshitz-Kosevich, apporte la preuve de l'existence d'une surface de Fermi fermee a caractere quasi-2D, abritant des quasiparticules coherentes respectant la statistique de Fermi-Dirac, dans la phase pseudogap d'YBCO. La faible frequence des oscillations quantiques, combinee avec l'etude de la partie monotone de la resistance de Hall en fonction de la temperature indique que la surface de Fermi d'YBCO sous-dope comprend une petite poche de Fermi occupee par des porteurs de charge negative. Cette particularite de la surface de Fermi dans le regime sous-dope incompatible avec les calculs de structure de bande est en fort contraste avec la structure electronique presente dans le regime surdope. Cette observation implique ainsi l'existence d'un point critique quantique dans le diagramme de phase d'YBCO, au voisinage duquel la surface de Fermi doit subir une reconstruction induite par l'etablissement d'une brisure de la symetrie de translation du reseau cristallin sous-jacent. Enfin, l'etude en fonction du dopage de la resistance de Hall et de la resistance longitudinale en champ magnetique intense suggere qu'un ordre du type onde de densite (DW) est responsable de la reconstruction de la surface de Fermi. L'analogie de la phenomenologie entourant le comportement des resistances longitudinale et de Hall dans YBa2Cu3Oy, avec des systemes dans lesquels l'existence d'un ordre du type DW est etablie, notamment des cuprates a structure tetragonale a basse temperature ("Low Temperature Tetragonal", LTT), indique que l'ordre causant la reconstruction de la surface de Fermi est stabilise au voisinage du dopage p = 1/8, et est en competition directe avec la supraconductivite.

Short arc orbit determination for altimeter calibration and validation on TOPEX/POSEIDON

NASA Technical Reports Server (NTRS)

Williams, B. G.; Christensen, E. J.; Yuan, D. N.; Mccoll, K. C.; Sunseri, R. F.

1993-01-01

TOPEX/POSEIDON (T/P) is a joint mission of United States' National Aeronautics and Space Administration (NASA) and French Centre National d'Etudes Spatiales (CNES) design launched August 10, 1992. It carries two radar altimeters which alternately share a common antenna. There are two project designated verification sites, a NASA site off the coast at Pt. Conception, CA and a CNES site near Lampedusa Island in the Mediterranean Sea. Altimeter calibration and validation for T/P is performed over these highly instrumented sites by comparing the spacecraft's altimeter radar range to computed range based on in situ measurements which include the estimated orbit position. This paper presents selected results of orbit determination over each of these sites to support altimeter verification. A short arc orbit determination technique is used to estimate a locally accurate position determination of T/P from less than one revolution of satellite laser ranging (SLR) data. This technique is relatively insensitive to gravitational and non-gravitational force modeling errors and is demonstrated by covariance analysis and by comparison to orbits determined from longer arcs of data and other tracking data types, such as Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) and Global Positioning System Demonstration Receiver (GPSDR) data.

The Normative Effects of Higher Education Policy in France

ERIC Educational Resources Information Center

Langan, Elise

2012-01-01

This student survey was a response to the French youth unrest in 2005 and 2006. It considers the degree to which French higher and secondary education institutions create social cohesion. Focusing on three distinct higher-education institutions: "L'institut d'etudes politiques de Paris" (Sciences Po), "Ecole Normale…

The Effect of Material Strength on Segment Penetration Behavior

DTIC Science & Technology

1993-04-01

Muenchen GERMANY Royal Armament R&D Establishment ATTN: I. Cullis Fort Halstead Sevenoaks, Kent TN14 7BJ ENGLAND Centre d’Etudes de Gramat ATTN...SOLVE Gerald 46500 Gramat FRANCE 2 Defense Research Establishment Suffield ATTN: C. Weickert D. Mackay Ralston, Alberta, TOJ 2N0 Ralston CANADA Defense

Initial Evaluation of Advanced Powder Metallurgy Magnesium Alloys for Armor Development

DTIC Science & Technology

2009-05-01

28911 LEGANES MADRID SPAIN 1 CELIUS MATERIAL TEKNIK KARLSKOGA AB L HELLNER S 69180 KARLSKOGA SWEDEN 3 CENTRE D’ETUDES GRAMAT ...J CAGNOUX C GALLIC J TRANCHET GRAMAT 46500 FRANCE 1 MINISTRY OF DEFENCE DGA DSP STTC G BRAULT 4 RUE DE LA PORTE D’ISSY

On Comparing Precision Orbit Solutions of Geodetic Satellites Given Several Atmospheric Density Models

DTIC Science & Technology

2014-08-01

Astrodynamics, drag, atmospheric density, geodesy 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 12 19a...Translation of ’Le satellite de geodesie ’Starlette’,’ Groupe de Recherches de Geodesie Spatiale, Centre National d’Etudes Spatiales, Bretigny-sur-Orge

Implementing reusable software components for SNOMED CT diagram and expression concept representations.

PubMed

Bánfai, Balázs; Porció, Roland; Kovács, Tibor

2014-01-01

SNOMED CT is a vital component in the future of semantic interoperability in healthcare as it provides the meaning to EHRs via its semantically rich, controlled terminology. Communicating the concepts of this terminology to both humans and machines is crucial therefore formal guidelines for diagram and expression representations have been developed by the curators of SNOMED CT. This paper presents a novel, model-based approach to implementing these guidelines that allows simultaneous editing of a concept via both diagram and expression editors. The implemented extensible software component can be embedded both both desktop and web applications.

Space cryogenics at CEA-SBT

NASA Astrophysics Data System (ADS)

Duband, Lionel; Charles, Ivan; Duval, Jean-Marc; Ercolani, Eric; Gully, Philippe; Luchier, Nicolas; Prouve, Thomas; Thibault, Pierre

2017-11-01

The "Service des Basses Températures" (SBT) of CEA Grenoble has been involved in space cryogenics for over 20 years now. In fact a dedicated laboratory was created within SBT to carry out these developments, the "Cryocoolers and Space Cryogenics" group, which comprises about 20 persons as of today. Various cryocoolers have been developed in the past and our fields of activity focus now on four main technologies: sorption coolers, multistage pulse tubes, adiabatic demagnetization refrigerators (ADR), and cryogenic loop heat pipes. In addition work on two new concepts for ground based dilution refrigerators is also ongoing. Finally developments on various key technologies such as the heat switches, the suspension or structural systems are also carried out. These developments are mainly funded by the European Space Agency (ESA) or by the Centre National d'Etudes Spatiales (CNES). For most of these systems the common feature is the absence of any moving parts or any friction, which guarantees a very good reliability and make them very good candidates for space borne instruments requiring cryogenic temperatures. In this paper we give an overview of these developments with a particular focus on the sub Kelvin coolers. Based on the HERSCHEL heritage for which we developed the flight sorption coolers, we are now proposing an original concept featuring the association of a 300 mK sorption unit with a miniature adiabatic demagnetization refrigerator. This combination will allow to provide temperature as low as 50 mK with a system weighting less than 5 kg. This development may have direct application for the XEUS and SPICA missions.

Artist Concept of InSight Lander on Mars

NASA Image and Video Library

2014-03-26

This artist's concept depicts the stationary NASA Mars lander known by the acronym InSight at work studying the interior of Mars. The InSight mission (for Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) is scheduled to launch in March 2016 and land on Mars six months later. It will investigate processes that formed and shaped Mars and will help scientists better understand the evolution of our inner solar system's rocky planets, including Earth. InSight will deploy two instruments to the ground using a robotic arm: a seismometer (contributed by the French space agency Centre National d'Etudes Spatiales, or CNES) to measure the microscopic ground motions from distant marsquakes, providing detailed information about the interior structure of Mars; and a heat-flow probe (contributed by the German Aerospace Center, or DLR) designed to hammer itself 3 to 5 meters (about 16 feet) deep and monitor heat coming from the planet's interior. The mission will also track the lander's radio to measure wobbles in the planet's rotation that relate to the size of its core and will include a camera and a suite of environmental sensors to monitor the weather and variations in the magnetic field. Lockheed Martin Space Systems, Denver, is building the spacecraft. Note: After thorough examination, NASA managers have decided to suspend the planned March 2016 launch of the Interior Exploration using Seismic Investigations Geodesy and Heat Transport (InSight) mission. The decision follows unsuccessful attempts to repair a leak in a section of the prime instrument in the science payload. http://photojournal.jpl.nasa.gov/catalog/PIA17358

Design, Fabrication, and Shakeout Testing of ATALANTE Dissolver Off-Gas Sorbent-Based Capture System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Jr, Joseph Franklin; Jubin, Robert Thomas; Jordan, Jacob A.

A sorbent-based capture system designed for integration into the existing dissolver off-gas (DOG) treatment system at the ATelier Alpha et Laboratoires pour ANalyses, Transuraniens et Etudes de retraitement (ATALANTE) facility has been successfully designed and fabricated and has undergone shakeout testing. Discussions with personnel from the ATALANTE facility provided guidance that was used for the design. All components for this system were specified, procured, and received on site at Oak Ridge National Laboratory (ORNL). The system was then fabricated and tested at ORNL to verify operation. Shakeout testing resulted in a simplified system. This system should be easily installed intomore » the existing facility and should be straightforward to operate during future experimental testing. All parts were selected to be compatible with ATALANTE power supplies, space requirements, and the existing DOG treatment system. Additionally, the system was demonstrated to meet all of four design requirements. These include (1) a dissolver off-gas flow rate of ≤100 L/h (1.67 L/min), (2) an external temperature of ≤50°C for all system components placed in the hot cell, (3) a sorbent bed temperature of ~150°C, and (4) a gas temperature of ~150°C upon entry into the sorbent bed. The system will be ready for shipment and installation in the existing DOG treatment system at ATALANTE in FY 2016.« less

Le transfert de connaissances entre les mathematiques et les sciences. Une etude exploratoire aupres d'eleves de 4e secondaire

NASA Astrophysics Data System (ADS)

Samson, Ghislain

2003-06-01

Au moment ou dans plusieurs pays on travaille a refondre les programmes d'etudes, tant au primaire qu'au secondaire, l'interet pour le transfert renait. Un des concepts fondamentaux en apprentissage consiste en l'habilete a reutiliser de facon consciente et efficace un acquis d'une situation a une autre situation. Cette recherche emane de preoccupations professionnelles au moment ou le chercheur etait enseignant au secondaire. Au cours de ces annees, il lui a ete possible de constater que plusieurs eleves percevaient difficilement les liens presents entre les disciplines mathematiques et scientifiques. Des travaux en psychologie cognitive et plus particulierement selon une perspective du traitement de l'information ont servi de cadre de reference pour evaluer et analyser les capacites de transfert aupres d'eleves de 4e secondaire. Ce cadre de reference permet de formuler le principal objectif qui est de mieux comprendre le processus de transfert chez des eleves en situation de resolution de problemes scientifiques. Cette these s'interesse donc au transfert en tant que phenomene important du processus d'apprentissage au sens de l'integration. La methode de recherche choisie, de nature qualitative, est principalement axee sur l'evaluation de la capacite a transferer des connaissances lors d'une epreuve et d'un entretien. Pour evaluer ce potentiel de transfert, nous avons elabore deux outils: une epreuve en mathematiques et en sciences et un guide d'entretien. Pour la passation de l'epreuve, le chercheur a pu compter sur la collaboration de 130 sujets provenant de deux ecoles. L'entretien complete la prise de donnees avec 13 sujets ayant accepte de poursuivre l'etude. Les donnees recueillies par ces instruments font ensuite l'objet d'une analyse de contenu. En premier lieu, les verbatims de l'epreuve et de l'entretien ont ete transcrits, puis codifies. La correction des reponses fournies pour les problemes resolus s'est faite a partir d'une grille d'analyse qualitative et adaptee de la litterature (Thouin, 1995). Une seconde serie d'analyses permettant de categoriser les reponses selon la typologie des connaissances declaratives, procedurales et conditionnelles complete la prise de donnees. Nos resultats indiquent que les sujets sont tres influences par des elements de surface, principalement lorsqu'il s'agit de problemes auxquels ils ne sont pas habitues. En l'absence de connaissances de base, plusieurs sujets vont tendre vers des propositions de solution "pratico-pratique" provenant de leur vecu: cela nous apparait d'importance d'un point de vue didactique et en matiere de transfert. Lors des entretiens realises un mois plus tard, les sujets ont eprouve de la difficulte a se rappeler le contenu de l'epreuve. Et lorsqu'il y avait un rappel, celui-ci etait superficiel et surtout axe sur le contenu ou le contexte d'un probleme. La plupart des sujets ne pouvait nommer que deux ou trois elements (des problemes en mathematiques, en sciences physiques, le probleme de la fenetre, le probleme du laser, etc.). Nos resultats confirment ce que plusieurs chercheurs (Julo, 1995, Jonnaert et Vander Borght, 1999; Richard et al., 1990) qui s'interessent aux questions de l'apprentissage admettent aujourd'hui: l'eleve ne travaille jamais sur la situation proposee par l'enseignant, mais bien sur la representation qu'il s'en est construite. Au plan methodologique, cette recherche est interessante par la variete des sources de collecte de donnees utilisees, par l'application d'outils methodologiques et d'analyses originaux tires de la recherche et de la pratique. Du cote theorique, il resulte de cette etude une meilleure comprehension du processus de transfert des connaissances mathematiques vers les sciences physiques. Finalement, aux plans didactique et pedagogique, cette recherche alimente la reflexion sur l'apprentissage et l'enseignement des sciences au secondaire. Elle fait ressortir que les mathematiques sont importantes dans la mobilisation de certaines connaissances scientifiques et que l'enseignant peut et devrait jouer un role pour favoriser le transfert.

Development of a metal-clad advanced composite shear web design concept

NASA Technical Reports Server (NTRS)

Laakso, J. H.

1974-01-01

An advanced composite web concept was developed for potential application to the Space Shuttle Orbiter main engine thrust structure. The program consisted of design synthesis, analysis, detail design, element testing, and large scale component testing. A concept was sought that offered significant weight saving by the use of Boron/Epoxy (B/E) reinforced titanium plate structure. The desired concept was one that was practical and that utilized metal to efficiently improve structural reliability. The resulting development of a unique titanium-clad B/E shear web design concept is described. Three large scale components were fabricated and tested to demonstrate the performance of the concept: a titanium-clad plus or minus 45 deg B/E web laminate stiffened with vertical B/E reinforced aluminum stiffeners.

Spirituality and the International Classification of Functioning, Disability and Health: content comparison of questionnaires measuring mindfulness based on the International Classification of Functioning.

PubMed

Offenbächer, Martin; Sauer, Sebastian; Hieblinger, Robin; Hufford, David J; Walach, Harald; Kohls, Niko

2011-01-01

To identify and compare the concepts contained in questionnaires measuring mindfulness using the International Classification of Functioning (ICF) as external reference. Questionnaires which are published in peer-reviewed journals and listed in Pubmed or PsycInfo were included. The questionnaires were analysed and, using a content-analytical approach, the respective items were categorised and linked to the ICF. Ten questionnaires were included. Ninety-four per cent (N = 341) of the concepts could be linked to 37 different ICF categories. One hundred and seventy-one (50.1%) concepts were linked to ICF categories of the component Body Function, 74 (21.7%) to categories of the component Activity and Participation and none to categories of the component Environmental Factors. In total, 28.2% of the linked concepts belonged to Personal factors, which are not yet classified in the ICF. The questionnaires exhibited considerable differences regarding content density (i.e. the average number of concepts per item) and content diversity (i.e. the number of ICF categories per concept). The ICF provides an useful external reference to identify and compare the concepts contained in mindfulness questionnaires. Also, mindfulness questionnaire concepts suggest potentially useful factors for classification within the ICF.

Autobiographically significant concepts: more episodic than semantic in nature? An electrophysiological investigation of overlapping types of memory.

PubMed

Renoult, Louis; Davidson, Patrick S R; Schmitz, Erika; Park, Lillian; Campbell, Kenneth; Moscovitch, Morris; Levine, Brian

2015-01-01

A common assertion is that semantic memory emerges from episodic memory, shedding the distinctive contexts associated with episodes over time and/or repeated instances. Some semantic concepts, however, may retain their episodic origins or acquire episodic information during life experiences. The current study examined this hypothesis by investigating the ERP correlates of autobiographically significant (AS) concepts, that is, semantic concepts that are associated with vivid episodic memories. We inferred the contribution of semantic and episodic memory to AS concepts using the amplitudes of the N400 and late positive component, respectively. We compared famous names that easily brought to mind episodic memories (high AS names) against equally famous names that did not bring such recollections to mind (low AS names) on a semantic task (fame judgment) and an episodic task (recognition memory). Compared with low AS names, high AS names were associated with increased amplitude of the late positive component in both tasks. Moreover, in the recognition task, this effect of AS was highly correlated with recognition confidence. In contrast, the N400 component did not differentiate the high versus low AS names but, instead, was related to the amount of general knowledge participants had regarding each name. These results suggest that semantic concepts high in AS, such as famous names, have an episodic component and are associated with similar brain processes to those that are engaged by episodic memory. Studying AS concepts may provide unique insights into how episodic and semantic memory interact.

Environmental Indicators. A Preliminary Set = Indicateurs d'environnement. Une etude pilote.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

This document provides a preliminary set of environmental indicators by which to measure environmental performance. The indicators are patterned on the outline of the Organisation for Economic Cooperation and Development (OECD) "Report on the State of the Environment," a companion volume published in the same year. This volume is…

Centenary Birth Anniversary of E. W. Beth (1908-1964)

ERIC Educational Resources Information Center

Bagni, Giorgio T.

2008-01-01

Evert Willem Beth (1908-1964) was a Dutch logician, mathematician and philosopher, whose work mainly concerned the foundations of mathematics. Beth was among the founders of the Commission Internationale pour l'Etude et l'Amelioration de l'Enseignement des Mathematiques and was a member of the Central Committee of the International Commission on…

An Analysis of Magnesium Alloy AZ31B-H24 for Ballistic Applications

DTIC Science & Technology

2007-12-01

CELIUS MATERIAL TEKNIK KARLSKOGA AB L HELLNER S 69180 KARLSKOGA SWEDEN 3 CENTRE D’ETUDES GRAMAT J CAGNOUX C GALLIC J TRANCHET... GRAMAT 46500 FRANCE 1 MINISTRY OF DEFENCE DGA DSP STTC G BRAULT 4 RUE DE LA PORTE D’ISSY 00460 ARMEES F 75015 PARIS FRANCE 1

Radiolocation Techniques (Les Techniques de Radiolocalisation

DTIC Science & Technology

1992-11-01

Dr R. Klemm DrD Rother FGAN- FFM SEL/LS/E Neuenahrer Strasse 20 Lorenzstrasse 10 D-5307 Wachtberg 7 D-7000 Stuttgart 40 Germany Germany Prof. G...des solutions. accas I lFionograinme, donc: aui profil. Cat article rapporte tine partie des Etudes mendes an La indthodo proposde s’inspirc de cette

Communication linguistique: Etude comparative faite sur le terrain (Linguistic Communication: A Comparative Field Study).

ERIC Educational Resources Information Center

Piron, Claude

2002-01-01

Compares the four international systems of linguistic communication used in the field (systems used in the United Nations, multinationals, the European Union, and Esperanto organizations) on select criteria (e.g., previous government investment). Discusses research that shows unilingual systems (English used alone, Esperanto) are those that…

Pratique d'apprentissage en ligne aux etudes superieures (Online Learning for Higher Education).

ERIC Educational Resources Information Center

Marchand, Louise

2001-01-01

Online learning requires new approaches to teaching and learning. At the University of Montreal, 28 graduate students in education and adult students specializing in educational technology attended an experimental distance education course. Students identified advantages and disadvantages of online learning/teaching and reflected on how the course…

Etude de l'affaiblissement du comportement mecanique du pergelisol du au rechauffement climatique

NASA Astrophysics Data System (ADS)

Buteau, Sylvie

Le rechauffement climatique predit pour les prochaines decennies, aura des impacts majeurs sur le pergelisol qui sont tres peu documentes pour l'instant. La presente etude a pour but d'evaluer ces impacts sur les proprietes mecaniques du pergelisol et sa stabilite a long terme. Une nouvelle technique d'essai de penetration au cone a taux de deformation controle, a ete developpee pour caracteriser en place le pergelisol. Ces essais geotechniques et la mesure de differentes proprietes physiques ont ete effectues sur une butte de pergelisol au cours du printemps 2000. Le developpement et l'utilisation d'un modele geothermique 1D tenant compte de la thermodependance du comportement mecanique ont permis d'evaluer que les etendues de pergelisol chaud deviendraient instables a la suite d'un rechauffement de l'ordre de 5°C sur cent ans. En effet, la resistance mecanique du pergelisol diminuera alors rapidement jusqu'a 11,6 MPa, ce qui correspond a une perte relative de 98% de la resistance par rapport a un scenario sans rechauffement.

A generative model for scientific concept hierarchies.

PubMed

Datta, Srayan; Adar, Eytan

2018-01-01

In many scientific disciplines, each new 'product' of research (method, finding, artifact, etc.) is often built upon previous findings-leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution.

A generative model for scientific concept hierarchies

PubMed Central

Adar, Eytan

2018-01-01

In many scientific disciplines, each new ‘product’ of research (method, finding, artifact, etc.) is often built upon previous findings–leading to extension and branching of scientific concepts over time. We aim to understand the evolution of scientific concepts by placing them in phylogenetic hierarchies where scientific keyphrases from a large, longitudinal academic corpora are used as a proxy of scientific concepts. These hierarchies exhibit various important properties, including power-law degree distribution, power-law component size distribution, existence of a giant component and less probability of extending an older concept. We present a generative model based on preferential attachment to simulate the graphical and temporal properties of these hierarchies which helps us understand the underlying process behind scientific concept evolution and may be useful in simulating and predicting scientific evolution. PMID:29474409

Investigation de l'anisotropie du gap supraconducteur dans les composes Ba(Fe(1-x)Co(x))2As2, Ba(1-x)K(x)Fe2As2, LiFeAs et Fe1-deltaTe(1-x)Se(x)

NASA Astrophysics Data System (ADS)

Reid, Jean-Philippe

ommaire La structure du gap supraconducteur et sa modulation sont intimement liees au potentiel d'interaction responsable de l'appariement des electrons d'un supraconducteur. Ainsi, l'etude de la structure du gap-SC et de sa modulation permettent de faire la lumiere sur la nature du mecanisme d'appariement des electrons. A cet egard, les resultats experimentaux des supraconducteurs a base de fer ne cadrent pas dans un seul ensemble, ce qui est en opposition au gap-SC universel des cuprates. Dans ce qui suit, nous presenterons une etude systematique du gap-SC pour plusieurs pnictides. En effet, en utilisant la conductivite thermique, une sonde directionnelle du gap-SC, nous avons ete en mesure de reveler la structure du gap-SC pour les composes suivants : Ba1-xKxFe 2As2, Ba(Fe1-xCo x)2As2, LiFeAs et Fe1-deltaTe 1-xSex. L'etude de ces quatre composes, de trois differentes familles structurales, a pu etablir un tableau partiel mais tres exhaustif de la structure du gap-SC de pnictides. En effet, tel qu'illustre dans cette these, ces quatre composes ne possedent aucun noeud dans leur structure du gap-SC a dopage optimal. Toutefois, a une concentration differente de celle optimale pour les composes K-Ba122 et Co-Ba122, des noeuds apparaissent sur la surface de Fermi, aux extremites 'du dome supraconducteur. Ceci suggere fortement que, pour ces composes, la presence de noeuds sur la surface de Fermi est nuisible a la phase supraconductrice. Mots-cles: Supraconducteurs a base de fer, Pnictides, Structure du gap supraconducteur, Conductivite thermique

Methodes d'amas quantiques a temperature finie appliquees au modele de Hubbard

NASA Astrophysics Data System (ADS)

Plouffe, Dany

Depuis leur decouverte dans les annees 80, les supraconducteurs a haute temperature critique ont suscite beaucoup d'interet en physique du solide. Comprendre l'origine des phases observees dans ces materiaux, telle la supraconductivite, est l'un des grands defis de la physique theorique du solide des 25 dernieres annees. L'un des mecanismes pressentis pour expliquer ces phenomenes est la forte interaction electron-electron. Le modele de Hubbard est l'un des modeles les plus simples pour tenir compte de ces interactions. Malgre la simplicite apparente de ce modele, certaines de ses caracteristiques, dont son diagramme de phase, ne sont toujours pas bien etablies, et ce malgre plusieurs avancements theoriques dans les dernieres annees. Cette etude se consacre a faire une analyse de methodes numeriques permettant de calculer diverses proprietes du modele de Hubbard en fonction de la temperature. Nous decrivons des methodes (la VCA et la CPT) qui permettent de calculer approximativement la fonction de Green a temperature finie sur un systeme infini a partir de la fonction de Green calculee sur un amas de taille finie. Pour calculer ces fonctions de Green, nous allons utiliser des methodes permettant de reduire considerablement les efforts numeriques necessaires pour les calculs des moyennes thermodynamiques, en reduisant considerablement l'espace des etats a considerer dans ces moyennes. Bien que cette etude vise d'abord a developper des methodes d'amas pour resoudre le modele de Hubbard a temperature finie de facon generale ainsi qu'a etudier les proprietes de base de ce modele, nous allons l'appliquer a des conditions qui s'approchent de supraconducteurs a haute temperature critique. Les methodes presentees dans cette etude permettent de tracer un diagramme de phase pour l'antiferromagnetisme et la supraconductivite qui presentent plusieurs similarites avec celui des supraconducteurs a haute temperature. Mots-cles : modele de Hubbard, thermodynamique, antiferromagnetisme, supraconductivite, methodes numeriques, larges matrices

Advanced General Aviation Turbine Engine (GATE) concepts

NASA Technical Reports Server (NTRS)

Lays, E. J.; Murray, G. L.

1979-01-01

Concepts are discussed that project turbine engine cost savings through use of geometrically constrained components designed for low rotational speeds and low stress to permit manufacturing economies. Aerodynamic development of geometrically constrained components is recommended to maximize component efficiency. Conceptual engines, airplane applications, airplane performance, engine cost, and engine-related life cycle costs are presented. The powerplants proposed offer encouragement with respect to fuel efficiency and life cycle costs, and make possible remarkable airplane performance gains.

Design for robustness of unique, multi-component engineering systems

NASA Astrophysics Data System (ADS)

Shelton, Kenneth A.

2007-12-01

The purpose of this research is to advance the science of conceptual designing for robustness in unique, multi-component engineering systems. Robustness is herein defined as the ability of an engineering system to operate within a desired performance range even if the actual configuration has differences from specifications within specified tolerances. These differences are caused by three sources, namely manufacturing errors, system degradation (operational wear and tear), and parts availability. Unique, multi-component engineering systems are defined as systems produced in unique or very small production numbers. They typically have design and manufacturing costs on the order of billions of dollars, and have multiple, competing performance objectives. Design time for these systems must be minimized due to competition, high manpower costs, long manufacturing times, technology obsolescence, and limited available manpower expertise. Most importantly, design mistakes cannot be easily corrected after the systems are operational. For all these reasons, robustness of these systems is absolutely critical. This research examines the space satellite industry in particular. Although inherent robustness assurance is absolutely critical, it is difficult to achieve in practice. The current state of the art for robustness in the industry is to overdesign components and subsystems with redundancy and margin. The shortfall is that it is not known if the added margins were either necessary or sufficient given the risk management preferences of the designer or engineering system customer. To address this shortcoming, new assessment criteria to evaluate robustness in design concepts have been developed. The criteria are comprised of the "Value Distance", addressing manufacturing errors and system degradation, and "Component Distance", addressing parts availability. They are based on an evolutionary computation format that uses a string of alleles to describe the components in the design concept. These allele values are unitless themselves, but map to both configuration descriptions and attribute values. The Value Distance and Component Distance are metrics that measure the relative differences between two design concepts using the allele values, and all differences in a population of design concepts are calculated relative to a reference design, called the "base design". The base design is the top-ranked member of the population in weighted terms of robustness and performance. Robustness is determined based on the change in multi-objective performance as Value Distance and Component Distance (and thus differences in design) increases. It is assessed as acceptable if differences in design configurations up to specified tolerances result in performance changes that remain within a specified performance range. The design configuration difference tolerances and performance range together define the designer's risk management preferences for the final design concepts. Additionally, a complementary visualization capability was developed, called the "Design Solution Topography". This concept allows the visualization of a population of design concepts, and is a 3-axis plot where each point represents an entire design concept. The axes are the Value Distance, Component Distance and Performance Objective. The key benefit of the Design Solution Topography is that it allows the designer to visually identify and interpret the overall robustness of the current population of design concepts for a particular performance objective. In a multi-objective problem, each performance objective has its own Design Solution Topography view. These new concepts are implemented in an evolutionary computation-based conceptual designing method called the "Design for Robustness Method" that produces robust design concepts. The design procedures associated with this method enable designers to evaluate and ensure robustness in selected designs that also perform within a desired performance range. The method uses an evolutionary computation-based procedure to generate populations of large numbers of alternative design concepts, which are assessed for robustness using the Value Distance, Component Distance and Design Solution Topography procedures. The Design for Robustness Method provides a working conceptual designing structure in which to implement and gain the benefits of these new concepts. In the included experiments, the method was used on several mathematical examples to demonstrate feasibility, which showed favorable results as compared to existing known methods. Furthermore, it was tested on a real-world satellite conceptual designing problem to illustrate the applicability and benefits to industry. Risk management insights were demonstrated for the robustness-related issues of manufacturing errors, operational degradation, parts availability, and impacts based on selections of particular types of components.

A Worksheet to Enhance Students’ Conceptual Understanding in Vector Components

NASA Astrophysics Data System (ADS)

Wutchana, Umporn; Emarat, Narumon

2017-09-01

With and without physical context, we explored 59 undergraduate students’conceptual and procedural understanding of vector components using both open ended problems and multiple choice items designed based on research instruments used in physics education research. The results showed that a number of students produce errors and revealed alternative conceptions especially when asked to draw graphical form of vector components. It indicated that most of them did not develop a strong foundation of understanding in vector components and could not apply those concepts to such problems with physical context. Based on the findings, we designed a worksheet to enhance the students’ conceptual understanding in vector components. The worksheet is composed of three parts which help students to construct their own understanding of definition, graphical form, and magnitude of vector components. To validate the worksheet, focus group discussions of 3 and 10 graduate students (science in-service teachers) had been conducted. The modified worksheet was then distributed to 41 grade 9 students in a science class. The students spent approximately 50 minutes to complete the worksheet. They sketched and measured vectors and its components and compared with the trigonometry ratio to condense the concepts of vector components. After completing the worksheet, their conceptual model had been verified. 83% of them constructed the correct model of vector components.

PopGen Fishbowl: A Free Online Simulation Model of Microevolutionary Processes

ERIC Educational Resources Information Center

Jones, Thomas C.; Laughlin, Thomas F.

2010-01-01

Natural selection and other components of evolutionary theory are known to be particularly challenging concepts for students to understand. To help illustrate these concepts, we developed a simulation model of microevolutionary processes. The model features all the components of Hardy-Weinberg theory, with population size, selection, gene flow,…

Implementation and Evaluation of a Course Concept Based on Reusable Learning Objects

ERIC Educational Resources Information Center

Van Zele, Els; Vandaele, Pieter; Botteldooren, Dick; Lenaerts, Josephina

2003-01-01

This article describes the implementation and evaluation of a learning objects based computer aided system for an advanced engineering course at Ghent University, Belgium. A new syllabus concept was introduced: students had access to a Web-delivered component and received an identical printed component as two sources of information additional to…

Patient Autonomy for the Management of Chronic Conditions: A Two-Component Re-conceptualization

PubMed Central

Naik, Aanand D.; Dyer, Carmel B.; Kunik, Mark E.; McCullough, Laurence B.

2010-01-01

The clinical application of the concept of patient autonomy has centered on the ability to deliberate and make treatment decisions (decisional autonomy) to the virtual exclusion of the capacity to execute the treatment plan (executive autonomy). However, the one-component concept of autonomy is problematic in the context of multiple chronic conditions. Adherence to complex treatments commonly breaks down when patients have functional, educational, and cognitive barriers that impair their capacity to plan, sequence, and carry out tasks associated with chronic care. The purpose of this article is to call for a two-component re-conceptualization of autonomy and to argue that the clinical assessment of capacity for patients with chronic conditions should be expanded to include both autonomous decision making and autonomous execution of the agreed-upon treatment plan. We explain how the concept of autonomy should be expanded to include both decisional and executive autonomy, describe the biopsychosocial correlates of the two-component concept of autonomy, and recommend diagnostic and treatment strategies to support patients with deficits in executive autonomy. PMID:19180389

The Relationship between Musical Instrumental Performance Skills and Postsecondary Musical Independence (How Important Are Scales, Etudes, Solos, Sight-Reading, Improvisation, Etc.?)

ERIC Educational Resources Information Center

Bobbett, Gordon C.; And Others

This study examines the relationships among a variety of secondary/postsecondary experiences and activities and postsecondary students' musical independence (MI). The paper reports on the impact Instrumental Performance Skills (IPSs) have on the students" MI development during private lessons, band rehearsal, and individual practicing. The study…

Ballistic Performance Testing of Aluminum Alloy 5059-H131 and 5059-H136 for Armor Applications

DTIC Science & Technology

2008-05-01

LEGANES MADRID SPAIN 1 CELIUS MATERIAL TEKNIK KARLSKOGA AB L HELLNER S 69180 KARLSKOGA SWEDEN 3 CENTRE D’ETUDES GRAMAT J...CAGNOUX C GALLIC J TRANCHET GRAMAT 46500 FRANCE 1 MINISTRY OF DEFENCE DGA DSP STTC G BRAULT 4 RUE DE LA PORTE D’ISSY 00460 ARMEES

International Symposium on Military Applications of Blast Simulation (5th)

DTIC Science & Technology

1977-06-22

Centre d’Etudes de Grainat, Gramat , France, de- scribed their work in designing a blast simulator with a test section of 12—rn width and 7—rn height...de Gramat , Gramat , France) on the dynamic behavior of limestone. Through a series of high—pressure experiments of the type developed in the recent

Mathematics for Vocational Students in France and England: Contrasting Provision and Consequences. Discussion Paper No. 23.

ERIC Educational Resources Information Center

Wolf, Alison

French postsecondary education for 16- to 19-year-olds is divided into programs that lead to the Baccalaureats--general, technical, and vocational--and to the lower-level Certificat d'Aptitude Professionnel (CAP) and Brevet d'Etudes Professionnelles (BEP). A common mathematics core curriculum is specified for all CAP students, regardless of…

Pedagogy of Notation: Learning Styles Using a Constructivist, Second-Language Acquisition Approach to Dance Notation Pedagogy

ERIC Educational Resources Information Center

Heiland, Teresa L.

2015-01-01

Four undergraduate dance majors learned Motif Notation and Labanotation using a second-language acquisition, playful, constructivist approach to learning notation literacy in order to learn and dance the "Parsons Etude." Qualitative outcomes were gathered from student journals and pre- and post-tests that assessed for levels of improved…

La Parabole du Gaucher et de la Casserole a Bec Verseur: Etude des Processus d'Apprentissage dans un Environnement de Calculatrices Symboliques.

ERIC Educational Resources Information Center

Trouche, Luc

2000-01-01

Discusses the problems of conceptualization of the function limit in technological environments (principally graphing calculators today and symbolic calculators tomorrow) that are gradually being adopted in precalculus teaching. Explains how the instrumentation process and the conceptualization process are dependent on each other. Sets forth a…

Modern Data Analysis techniques in Noise and Vibration Problems

DTIC Science & Technology

1981-11-01

Hilbert l’une de l’autre. Cette propriete se retrouve dans l’etude de la causalite : ce qui de- finit un critere pratique caracterisant un signal donc, par...entre Ie champ direct et Ie champ reflechi se caracterisent loca- lement par l’existence de frequences pour lesquelles l’interference est totale

Problemes en enseignement fonctionnel des langues (Problems in the Functional Teaching of Languages). Publication B-103.

ERIC Educational Resources Information Center

Alvarez, Gerardo, Ed.; Huot, Diane, Ed.

Articles include: (1) "L'elaboration du materiel pedagogique pour des publics adultes" (The Elaboration of Teaching Materials for the Adult Public) by G. Painchaud-Leblanc, (2) "L'elaboration d'un programme d'etudes en francais langue seconde a partir des donnees recentes en didactique des langues" (The Elaboration of a Program…

The Work of Ambroise Tardieu: The First Definitive Description of Child Abuse

ERIC Educational Resources Information Center

Roche, A.J.; Fortin, G.; Labbe, J.; Brown, J.; Chadwick, D.

2005-01-01

The first important monograph describing the battered child syndrome was written in 1860 by Ambroise Tardieu, a French forensic physician. Here is a translation of his article, published in the Annales d'hygiene publique et de medecine legale, with the title ''Etude medico-legale sur les sevices et mauvais traitements exerces sur des enfants.''…

Etude de la stabilite d'un avion BWB (Blended Wing Body) de 200 passagers

NASA Astrophysics Data System (ADS)

Legros, Clement

The Blended Wing Body (BWB) is a type of innovative aircraft, based on the flying wing concept. This new type of airplane shows several advantages compared to the conventional airplanes : economy of fuel, reduction of the weight of the structure, reduction of the noise and less impact on the environment, increased payload capacity. However, this kind of aircraft has a lack of stability due to the absence of vertical tail. Several studies of stability were already realized on reduced size models of BWB, but there is no study on a 200 passengers BWB. That's why, the main objective of this present study is to integrate the engines and theirs pylons into the existing conceptual design of the BWB to analyze of their impact on its static and dynamic stability over the flight envelope. The conception of the BWB was realized with the platform of design CEASIOM. The airplane, the engines and theirs pylons were obtained in the geometrical module AcBuilder of CEASIOM. The various aerodynamic coefficients are calculated thanks to Tornado program. These coefficients allow realizing the calculations of stability, in particular with the longitudinal and lateral matrices of stability. Afterward, the BWB flight envelope is created based on aeronautical data of a similar airplane, the Airbus A320. From this flight envelope, we get back several thousand possible points of flight. The last step is to check the static and dynamic stability, using the longitudinal and lateral matrices of stability and the Flying Qualities Requirements, for every point of flight. To validate our study of stability, the already existing studies of stability of the Boeing 747 will be used and compared with our model.

Self-assembly concepts in the formation of nanostructured particles using a liquid-phase synthesis method

NASA Astrophysics Data System (ADS)

Nandiyanto, Asep Bayu Dani

2016-02-01

When synthesizing particles using a liquid-phase synthesis method, reactant components show interaction with the reaction system itself. However, current reports described successful synthesis of material with only partial information on the component-component interaction and possible self-assembly mechanism occurring during the material synthesis process. Here, self-assembly concepts in the formation of nanostructured particles are presented. Influences of self-assembly parameters (i.e., surface charge, size, and concentration of components involving the reaction) on self-organized material fabrication are described. Because understanding the interaction of the component provides significant information in regard to practical uses, this report can be relevant to further material development and fabrication.

Development of dry coal feeders

NASA Technical Reports Server (NTRS)

Bonin, J. H.; Cantey, D. E.; Daniel, A. D., Jr.; Meyer, J. W.

1977-01-01

Design and fabrication of equipment of feed coal into pressurized environments were investigated. Concepts were selected based on feeder system performance and economic projections. These systems include: two approaches using rotating components, a gas or steam driven ejector, and a modified standpipe feeder concept. Results of development testing of critical components, design procedures, and performance prediction techniques are reviewed.

Developpement d'une commande pour une hydrolienne de riviere et optimisation =

NASA Astrophysics Data System (ADS)

Tetrault, Philippe

Suivant le developpement des energies renouvelables, la presente etude se veut une base theorique quant aux principes fondamentaux necessaires au bon fonctionnement et a l'implementation d'une hydrolienne de riviere. La problematique derriere ce nouveau type d'appareil est d'abord presentee. La machine electrique utilisee dans l'application, c'est-a-dire la machine synchrone a aimants permanents, est etudiee : ses equations dynamiques mecaniques et electriques sont developpees, introduisant en meme temps le concept de referentiel tournant. Le fonctionnement de l'onduleur utilise, soit un montage en pont complet a deux niveaux a semi-conducteurs, est explique et mit en equation pour permettre de comprendre les strategies de modulation disponibles. Un bref historique de ces strategies est fait avant de mettre l'emphase sur la modulation vectorielle qui sera celle utilisee pour l'application en cours. Les differents modules sont assembles dans une simulation Matlab pour confirmer leur bon fonctionnement et comparer les resultats de la simulation avec les calculs theoriques. Differents algorithmes permettant de traquer et maintenir un point de fonctionnement optimal sont presentes. Le comportement de la riviere est etudie afin d'evaluer l'ampleur des perturbations que le systeme devra gerer. Finalement, une nouvelle approche est presentee et comparee a une strategie plus conservatrice a l'aide d'un autre modele de simulation Matlab.

SITELLE: a wide-field imaging Fourier transform spectrometer for the Canada-France-Hawaii Telescope

NASA Astrophysics Data System (ADS)

Drissen, L.; Bernier, A.-P.; Rousseau-Nepton, L.; Alarie, A.; Robert, C.; Joncas, G.; Thibault, S.; Grandmont, F.

2010-07-01

We describe the concept of a new instrument for the Canada-France-Hawaii telescope (CFHT), SITELLE (Spectromètre Imageur à Transformée de Fourier pour l'Etude en Long et en Large de raies d'Emission), as well as a science case and a technical study of its preliminary design. SITELLE will be an imaging Fourier transform spectrometer capable of obtaining the visible (350 nm - 950 nm) spectrum of every source of light in a field of view of 15 arcminutes, with 100% spatial coverage and a spectral resolution ranging from R = 1 (deep panchromatic image) to R = 104 (for gas dynamics). SITELLE will cover a field of view 100 to 1000 times larger than traditional integral field spectrographs, such as GMOS-IFU on Gemini or the future MUSE on the VLT. It is a legacy from BEAR, the first imaging FTS installed on the CFHT and the direct successor of SpIOMM, a similar instrument attached to the 1.6-m telescope of the Observatoire du Mont-Mégantic in Québec. SITELLE will be used to study the structure and kinematics of HII regions and ejecta around evolved stars in the Milky Way, emission-line stars in clusters, abundances in nearby gas-rich galaxies, and the star formation rate in distant galaxies.

Nanotechnology Concepts at MSFC: Engineering Directorate

NASA Technical Reports Server (NTRS)

Bhat, Biliyar; Kaul, Raj; Shah, Sandeep; Smithers, Gweneth; Watson, Michael D.

2000-01-01

Nanotechnology is the art and science of building materials and devices at the ultimate level of finesse: atom by atom. Our nation's space program has needs for miniaturization of components, minimization of weight and maximization of performance, and nanotechnology will help us get there. MSFC - Engineering Directorate (ED) is committed to developing nanotechnology that will enable MSFC missions in space transportation, space science and space optics manufacturing. MSFC-ED has a dedicated group of technologists who are currently developing high pay-off nanotechnology concepts. This poster presentation will outline some of the concepts being developed at this time including, nanophase structural materials, carbon nanotube reinforced metal and polymer matrix composites, nanotube temperature sensors and aerogels. The poster will outline these concepts and discuss associated technical challenges in turning these concepts into real components and systems.

Nanotechnology Concepts at Marshall Space Flight Center: Engineering Directorate

NASA Technical Reports Server (NTRS)

Bhat, B.; Kaul, R.; Shah, S.; Smithers, G.; Watson, M. D.

2001-01-01

Nanotechnology is the art and science of building materials and devices at the ultimate level of finesse: atom by atom. Our nation's space program has need for miniaturization of components, minimization of weight, and maximization of performance, and nanotechnology will help us get there. Marshall Space Flight Center's (MSFC's) Engineering Directorate is committed to developing nanotechnology that will enable MSFC missions in space transportation, space science, and space optics manufacturing. MSFC has a dedicated group of technologists who are currently developing high-payoff nanotechnology concepts. This poster presentation will outline some of the concepts being developed including, nanophase structural materials, carbon nanotube reinforced metal and polymer matrix composites, nanotube temperature sensors, and aerogels. The poster will outline these concepts and discuss associated technical challenges in turning these concepts into real components and systems.

Redesign of solid rocket booster/external tank attachment ring for the space transportation system

NASA Technical Reports Server (NTRS)

Mccomb, Harvey G., Jr. (Compiler)

1987-01-01

An improved design concept is presented for the Space Shuttle solid rocket booster (SRB)/external tank (ET) attachment ring structural component. This component picks up three struts which attach the aft end of each SRB to the ET. The concept is a partial ring with carefully tapered ends to distribute fastener loads safely into the SRB. Extensive design studies and analyses were performed to arrive at the concept. Experiments on structural elements were performed to determine material strength and stiffness characteristics. Materials and fabrication studies were conducted to determine acceptable tolerances for the design concept. An overview is provided of the work along with conclusions and major recommendations.

Wide Field X-Ray Telescope Mission Concept Study Results

NASA Technical Reports Server (NTRS)

Hopkins, R. C.; Thomas, H. D.; Fabisinski, L. L.; Baysinger, M.; Hornsby, L. S.; Maples, C. D.; Purlee, T. E.; Capizzo, P. D.; Percy, T. K.

2014-01-01

The Wide Field X-Ray Telescope (WFXT) is an astrophysics mission concept for detecting and studying extra-galactic x-ray sources, including active galactic nuclei and clusters of galaxies, in an effort to further understand cosmic evolution and structure. This Technical Memorandum details the results of a mission concept study completed by the Advanced Concepts Office at NASA Marshall Space Flight Center in 2012. The design team analyzed the mission and instrument requirements, and designed a spacecraft that enables the WFXT mission while using high heritage components. Design work included selecting components and sizing subsystems for power, avionics, guidance, navigation and control, propulsion, structures, command and data handling, communications, and thermal control.

Mutations des roles techniques et formation. Etude documentaire (Changes in the Roles and Education of Technicians. Documentary Study).

ERIC Educational Resources Information Center

Pinard, Helene

Drawing from research conducted in 1990-91, this report examines trends affecting the future work of technicians in Quebec, their pre-employment education, and the link between college and work. Part 1 focuses on aspects of the economic, technological, and social environment that will influence the future role of technicians. Economic concerns…

The Role of Women in Foreign-Language Textbooks: A Collection of Essays. Collection d'"Etudes linguistiques" No. 24.

ERIC Educational Resources Information Center

Freudenstein, R., Ed.

Essays that consider the way that women are portrayed in foreign language textbooks are presented. The selected essays were submitted to a competition sponsored by the Federation Internationale des Professeurs de Langues Vivantes, which requested that language teachers assess such concerns as: (1) whether women were described in a stereotyped way;…

Etude RICH Nursing. Plus de connaissances et de preuves scientifiques

PubMed Central

SCHUBERT, MARIA

2009-01-01

L’importance et la validité des résultats de l’étude RICH-Nursing* ont été récemment mises en cause par certains milieux, ce qui a provoqué certaines incertitudes chez les infirmières. Les auteurs reviennent sur l’impact actuel de cette étude et évoquent les perspectives d’avenir. PMID:25221376

Primary and Secondary Vestibular Connections in the Brain Stem and Cerebellum: An Axoplasmic Transport Study in the Monkey and Cat

DTIC Science & Technology

1983-08-25

Edinger-Westphal nucleus in the cat, Brain Research, 141 (1978) 153-159. Lorente de No, R., Etudes sur le cerveau posterieur. Ill, Sur 1 es connexions...extra-cerebelleuses des fascicules afferents au cerveau , et sur la fontion de cet organe, Trav. Lab. Rech. Biol. Univ. Madrid, 22 (1924) 51-65

L'ilot du reservoir: etude de voisinage en milieu urbain (The Reservoir Block: A Study of a Neighborhood in an Urban Setting).

ERIC Educational Resources Information Center

Rey, Jean-Noel

1983-01-01

An analysis of a small neighborhood of Paris looks at its layout and spatial constraints, habitats, symbols, sense of territory, and rhythms and styles of the inhabitants and their roles in the group. The description, including photos, is intended for use in the French language classroom. (MSE)

Canadian Mathematics Education Study Group = Groupe Canadien d'etude en didactique des mathematiques. Proceedings of the Annual Meeting (22nd, Vancouver, British Columbia, Canada, May 29-June 2, 1998).

ERIC Educational Resources Information Center

Pothier, Yvonne M., Ed.

This proceedings includes the following papers: (1) "Structure of Attention in Teaching Mathematics" (John Mason); (2) "Communicating Mathematics or Mathematics Storytelling" (Kathy Heinrich); (3) "Assessing Mathematical Thinking" (Florence Glanfield and Pat Rogers); (4) "From Theory to Observational Data (and…

Zone Nationale D'Etude de L'Environnment: Un Guide (National Environmental Study Area: A Guide).

ERIC Educational Resources Information Center

National Park Service (Dept. of Interior), Washington, DC.

This booklet, the French version of SE 014 817, is a guide for teachers and resource managers who are interested in establishing National Environmental Study Areas (NESA) or interested in receiving NESA recognition for their on-going environmental study area programs. It outlines the characteristics and procedures of the program; the nature,…

The COROT telescope

NASA Astrophysics Data System (ADS)

Viard, Thierry

2017-11-01

The COROT telescope, of which the customer is the French "INSU" / "CNES" (Institut National des Sciences de l'Univers / Centre National des Etudes Spatiales) is in fact a very precise and stable imaging instrument, which will be pointed towards fixed areas in the sky (each containing more than 3000 target stars) for periods of at least 5 months, in order to carry out its two missions.

Etude de l'apprentissage par la lecture d'etudiants en contexte d'apprentissage par problemes (APP) (A Study of Student Text-Learning Strategy).

ERIC Educational Resources Information Center

Cartier, Sylvie

2002-01-01

Examined strategies reported by students during reading to develop knowledge in their area of professional training. Discovered the reading, encoding, self-regulation, and resource management strategies used most often by students, which were not sufficient to attain effective learning. Less frequently used strategies added nuances to the…

Symetrie en energie des spectres de l'onde de densite de charge dans le 2-hydrogene seleniure de niobium

NASA Astrophysics Data System (ADS)

Behmand, Behnaz

Les mecanismes qui menent a la supraconductivite dans les supraconducteurs a haute temperature critique sont encore aujourd'hui mal compris contrairement a ceux dans les supraconducteurs conventionnels. Dans les hauts-Tc, certaines modulations de la densite d'etats electroniques coexistant avec la phase supraconductrice ont ete observees, ce qui engendre des questionnements sur leur role dans la supraconductivite. En fait, plusieurs types de modulation de la densite d'etats electroniques existent, comme par exemple l'onde de densite de charge et l'onde de densite de paires. Ces deux modulations, d'origines differentes et mesurables avec la technique de spectroscopie par effet tunnel, peuvent etre differenciees avec une etude de leur symetrie. Ce memoire consistera donc a presenter l'etude de la symetrie de l'onde de densite de charge dans le 2H-NbSe2 qui est presente dans la phase supraconductrice a 300 mK. Par contre, certaines difficultes liees au principe de mesure, soit l'effet de normalisation, nuisent a l'identification de cette symetrie. La methode, pour contourner ce probleme sera alors l'element clef de ce travail.

A microcosm of musical expression. III. Contributions of timing and dynamics to the aesthetic impression of pianists' performances of the initial measures of Chopin's Etude in E major.

PubMed

Repp, B H

1999-07-01

Four judges repeatedly assessed the overall aesthetic quality of more than 100 recorded performances of the opening of Chopin's Etude in E major on a 10-point scale. The judgments, which exhibited reasonable reliability and modest intercorrelations, were entered into regression analyses with 16 independent variables derived from earlier objective analyses of the expressive timing and dynamics of the performances [Repp, J. Acoust. Soc. Am. 104, 1085-1100 (1998); 105, 1972-1988 (1999)]. Only between 9% and 18% of the variance in the judges' ratings was accounted for. By contrast, timing variables accounted for 53% of the variance in one judge's ratings of synthesized performances that varied in timing only and mimicked the timing patterns of the original performances. These results indicate, first, that the aesthetic impression of the original recordings rested primarily on aspects other than those measured (such as texture, tone, or aspects of timing and dynamics that eluded the earlier analyses) and, second, that very different patterns of timing and dynamics are aesthetically acceptable for the same music, provided that other, aesthetically more crucial performance aspects are present.

Borderline personality features and implicit shame-prone self-concept in middle childhood and early adolescence.

PubMed

Hawes, David J; Helyer, Rebekah; Herlianto, Eugene C; Willing, Jonah

2013-01-01

This study tested if children and adolescents with high levels of borderline personality features (BPF) exhibit the same shame-prone self-concept previously found to characterize adults with borderline personality disorder (Rüsch et al., 2007 ). Self-concept was indexed using the Implicit Association Test, in a community sample of children/adolescents aged 10 to 14 years (48% female; M age = 12.04 years). Common domains of child and adolescent psychopathology and core components of BPF were assessed using self-reports on the Strengths and Difficulties Questionnaire and the Borderline Personality Features Scale for Children. The identity problems component of BPF was found to significantly predict implicit levels of shame-prone self-concept, but only among girls. This effect was independent of the key dimensions of child and adolescent psychopathology that overlap with BPF-including features hyperactivity/inattention, disruptive behavior problems, and anxiety/depression-none of which were associated with shame-prone self-concept at the bivariate level or otherwise. The current findings provide preliminary evidence that self-schemas related to shame are uniquely associated with a core component of BPF in middle childhood and early adolescence and suggest that this correlate may apply uniquely to female individuals. These findings point to the identity problems component of BPF as a priority for future clinical and developmental research into mechanisms associated with BPF across childhood and adolescence.

Content Analysis of the Concept of Addiction in High School Textbooks of Iran.

PubMed

Mirzamohammadi, Mohammad Hasan; Mousavi, Sayedeh Zainab; Massah, Omid; Farhoudian, Ali

2017-01-01

This research sought to determine how well the causes of addiction, addiction harms, and prevention of addiction have been noticed in high school textbooks. We used descriptive method to select the main related components of the addiction concept and content analysis method for analyzing the content of textbooks. The study population comprised 61 secondary school curriculum textbooks and study sample consisted of 14 secondary school textbooks selected by purposeful sampling method. The tools for collecting data were "content analysis inventory" which its validity was confirmed by educational and social sciences experts and its reliability has been found to be 91%. About 67 components were prepared for content analysis and were divided to 3 categories of causes, harms, and prevention of addiction. The analysis units in this study comprised phrases, topics, examples, course topics, words, poems, images, questions, tables, and exercises. Results of the study showed that the components of the addiction concept have presented with 212 remarks in the textbooks. Also, the degree of attention given to any of the 3 main components of the addiction concept were presented as follows: causes with 52 (24.52%) remarks, harm with 89 (41.98%) remarks, and prevention with 71 (33.49%) remarks. In high school textbooks, little attention has been paid to the concept of addiction and mostly its biological dimension were addressed while social, personal, familial, and religious dimensions of addiction have been neglected.

Proceedings of the International Cryocooler Conference (7th) Held in Santa Fe, New Mexico on 17-19 November 1992. Part 4

DTIC Science & Technology

1993-04-01

and Long Life Applications, Stirling Cryocoolers , Pulse Tube Refrigerators, Novel Concepts and Component D)evclopment, Low Temperature Regenerator... Stirling Cryocoolers , Pulse Tube Refrigerators, Novel Concepts and Component Development, Low Temperature Regenerator Development, and J-T and...213 LINEARIZED PULSE TUBE CRYOCOOLER THEORY ....H . M ilels .. .... ...................... ..... ...... ....... ......... 22 1

The development and testing of the thermal break divertor monoblock target design delivering 20 MW m-2 heat load capability

NASA Astrophysics Data System (ADS)

Fursdon, M.; Barrett, T.; Domptail, F.; Evans, Ll M.; Luzginova, N.; Greuner, N. H.; You, J.-H.; Li, M.; Richou, M.; Gallay, F.; Visca, E.

2017-12-01

The design and development of a novel plasma facing component (for fusion power plants) is described. The component uses the existing ‘monoblock’ construction which consists of a tungsten ‘block’ joined via a copper interlayer to a through CuCrZr cooling pipe. In the new concept the interlayer stiffness and conductivity properties are tuned so that stress in the principal structural element of the component (the cooling pipe) is reduced. Following initial trials with off-the-shelf materials, the concept was realized by machined features in an otherwise solid copper interlayer. The shape and distribution of the features were tuned by finite element analyses subject to ITER structural design criterion in-vessel components (SDC-IC) design rules. Proof of concept mock-ups were manufactured using a two stage brazing process verified by tomography and micrographic inspection. Full assemblies were inspected using ultrasound and thermographic (SATIR) test methods at ENEA and CEA respectively. High heat flux tests using IPP’s GLADIS facility showed that 200 cycles at 20 MW m-2 and five cycles at 25 MW m-2 could be sustained without apparent component damage. Further testing and component development is planned.

Shape optimization of three-dimensional stamped and solid automotive components

NASA Technical Reports Server (NTRS)

Botkin, M. E.; Yang, R.-J.; Bennett, J. A.

1987-01-01

The shape optimization of realistic, 3-D automotive components is discussed. The integration of the major parts of the total process: modeling, mesh generation, finite element and sensitivity analysis, and optimization are stressed. Stamped components and solid components are treated separately. For stamped parts a highly automated capability was developed. The problem description is based upon a parameterized boundary design element concept for the definition of the geometry. Automatic triangulation and adaptive mesh refinement are used to provide an automated analysis capability which requires only boundary data and takes into account sensitivity of the solution accuracy to boundary shape. For solid components a general extension of the 2-D boundary design element concept has not been achieved. In this case, the parameterized surface shape is provided using a generic modeling concept based upon isoparametric mapping patches which also serves as the mesh generator. Emphasis is placed upon the coupling of optimization with a commercially available finite element program. To do this it is necessary to modularize the program architecture and obtain shape design sensitivities using the material derivative approach so that only boundary solution data is needed.

Development of sensors for ceramic components in advanced propulsion systems: Survey and evaluation of measurement techniques for temperature, strain and heat flux for ceramic components in advanced propulsion systems

NASA Technical Reports Server (NTRS)

Atkinson, W. H.; Cyr, M. A.; Strange, R. R.

1988-01-01

The report presents the final results of Tasks 1 and 2, Development of Sensors for Ceramic Components in Advanced Propulsion Systems (NASA program NAS3-25141). During Task 1, an extensive survey was conducted of sensor concepts which have the potential for measuring surface temperature, strain and heat flux on ceramic components for advanced propulsion systems. Each sensor concept was analyzed and evaluated under Task 2; sensor concepts were then recommended for further development. For temperature measurement, both pyrometry and thermographic phosphors are recommended for measurements up to and beyond the melting point of ceramic materials. For lower temperature test programs, the thin-film techniques offer advantages in the installation of temperature sensors. Optical strain measurement techniques are recommended because they offer the possibility of being useful at very high temperature levels. Techniques for the measurement of heat flux are recommended for development based on both a surface mounted sensor and the measurement of the temperature differential across a portion of a ceramic component or metallic substrate.

A geometric approach to failure detection and identification in linear systems

NASA Technical Reports Server (NTRS)

Massoumnia, M. A.

1986-01-01

Using concepts of (C,A)-invariant and unobservability (complementary observability) subspaces, a geometric formulation of the failure detection and identification filter problem is stated. Using these geometric concepts, it is shown that it is possible to design a causal linear time-invariant processor that can be used to detect and uniquely identify a component failure in a linear time-invariant system, assuming: (1) The components can fail simultaneously, and (2) The components can fail only one at a time. In addition, a geometric formulation of Beard's failure detection filter problem is stated. This new formulation completely clarifies of output separability and mutual detectability introduced by Beard and also exploits the dual relationship between a restricted version of the failure detection and identification problem and the control decoupling problem. Moreover, the frequency domain interpretation of the results is used to relate the concepts of failure sensitive observers with the generalized parity relations introduced by Chow. This interpretation unifies the various failure detection and identification concepts and design procedures.

Fracture mechanics concepts in reliability analysis of monolithic ceramics

NASA Technical Reports Server (NTRS)

Manderscheid, Jane M.; Gyekenyesi, John P.

1987-01-01

Basic design concepts for high-performance, monolithic ceramic structural components are addressed. The design of brittle ceramics differs from that of ductile metals because of the inability of ceramic materials to redistribute high local stresses caused by inherent flaws. Random flaw size and orientation requires that a probabilistic analysis be performed in order to determine component reliability. The current trend in probabilistic analysis is to combine linear elastic fracture mechanics concepts with the two parameter Weibull distribution function to predict component reliability under multiaxial stress states. Nondestructive evaluation supports this analytical effort by supplying data during verification testing. It can also help to determine statistical parameters which describe the material strength variation, in particular the material threshold strength (the third Weibull parameter), which in the past was often taken as zero for simplicity.

Initial Investigation of a Novel Thermal Storage Concept as Part of a Renewable Energy System

DTIC Science & Technology

2013-06-01

stress (pascal) z-component of shear stress (pascal) Fslip constant Esl ip constant surface tension gradient (n/m-k) specularity coefficient...Axis x-component of ¥-Component of z- component of x -component of v-component of z-component of Fs l ip constant Esl i p constant Rotation

Component-Level Electronic-Assembly Repair (CLEAR) Operational Concept

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.; Vrnak, Daniel R.

2011-01-01

This Component-Level Electronic-Assembly Repair (CLEAR) Operational Concept document was developed as a first step in developing the Component-Level Electronic-Assembly Repair (CLEAR) System Architecture (NASA/TM-2011-216956). The CLEAR operational concept defines how the system will be used by the Constellation Program and what needs it meets. The document creates scenarios for major elements of the CLEAR architecture. These scenarios are generic enough to apply to near-Earth, Moon, and Mars missions. The CLEAR operational concept involves basic assumptions about the overall program architecture and interactions with the CLEAR system architecture. The assumptions include spacecraft and operational constraints for near-Earth orbit, Moon, and Mars missions. This document addresses an incremental development strategy where capabilities evolve over time, but it is structured to prevent obsolescence. The approach minimizes flight hardware by exploiting Internet-like telecommunications that enables CLEAR capabilities to remain on Earth and to be uplinked as needed. To minimize crew time and operational cost, CLEAR exploits offline development and validation to support online teleoperations. Operational concept scenarios are developed for diagnostics, repair, and functional test operations. Many of the supporting functions defined in these operational scenarios are further defined as technologies in NASA/TM-2011-216956.

Unpacking the Meaning of the Mole Concept for Secondary School Teachers and Students

ERIC Educational Resources Information Center

Fang, Su-Chi; Hart, Christina; Clarke, David

2014-01-01

The "mole" is a fundamental concept in quantitative chemistry, yet research has shown that the mole is one of the most perplexing concepts in the teaching and learning of chemistry. This paper provides a survey of the relevant literature, identifies the necessary components of a sound understanding of the mole concept, and unpacks and…

The essence of frailty: A systematic review and qualitative synthesis on frailty concepts and definitions.

PubMed

Junius-Walker, Ulrike; Onder, Graziano; Soleymani, Dagmar; Wiese, Birgitt; Albaina, Olatz; Bernabei, Roberto; Marzetti, Emanuele

2018-05-31

One of the major threats looming over the growing older population is frailty. It is a distinctive health state characterised by increased vulnerability to internal and external stressors. Although the presence of frailty is well acknowledged, its concept and operationalisation are hampered by the extraordinary phenotypical and biological complexity. Yet, a widely accepted conception is needed to offer tailored policies and approaches. The ADVANTAGE Group aims to analyse the diverse frailty concepts to uncover the essence of frailty as a basis for a shared understanding. A systematic literature review was performed on frailty concepts and definitions from 2010 onwards. Eligible publications were reviewed using concept analysis that led to the extraction of text data for the themes "definition", "attributes", "antecedents", "consequences", and "related concepts". Qualitative description was used to further analyse the extracted text passages, leading to inductively developed categories on the essence of frailty. 78 publications were included in the review, and 996 relevant text passages were extracted for analysis. Five components constituted a comprehensive definition: vulnerability, genesis, features, characteristics, and adverse outcomes. Each component is described in more detail by a set of defining and explanatory criteria. An underlying functional perspective of health or its impairments is most compatible with the entity of frailty. The recent findings facilitate a focus on the relevant building blocks that define frailty. They point to the commonalities of the diverse frailty concepts and definitions. Based on these components, a widely accepted broad definition of frailty comes into range. Copyright © 2018 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Oceanography in the formal and informal classroom

NASA Technical Reports Server (NTRS)

Richardson, A.; Jasnow, M.; Srinivasan, M.; Rosmorduc, V.; Blanc, F.

2002-01-01

The TOPEX/Poseidon and Jason-1 ocean altimeter missions offer the educator in the middle school or informal education venue a unique opportunity for reinforcing ocean science studies. An educational poster from NASA's Jet Propulsion Laboratory and France's Centre National d'Etudes Spatiales provide teachers and students a tool to examine topics such as the dynamics of ocean circulation, ocean research, and the oceans' role in climate.

STS-93 MS Tognini checks the BRIC experiment petri dishes on the middeck

NASA Image and Video Library

2013-11-18

STS093-350-008 (22-27 July 1999) --- Astronaut Michel Tognini, mission specialist representing France’s Centre National d’Etudes Spatiales (CNES), checks the Biological Research in Canisters (BRIC) payload petri dishes on the mid deck of the Space Shuttle Columbia. BRIC was designed to investigate the effects of space flight on small arthropod animals and plant specimens.

Canadian Mathematics Education Study Group = Groupe Canadien d'etude en didactique des matematiques. Proceedings of the Annual Meeting (St. Catharines, Ontario, Canada, May 27-31, 1989).

ERIC Educational Resources Information Center

Pereira-Mendoza, Lionel, Ed.; Quigley, Martyn, Ed.

These conference proceedings include two invited lectures, four working group reports, five topic group reports, a list of participants, and a list of previous proceedings. The invited lectures were: "Teaching Mathematical Proof: Relevance and Complexity of a Social Approach" (Nicolas Balacheff) and "Geometry Is Alive and…

Stakeholder Opinions on Suitability of Cello Etudes Created from Taksims of Tanburi Cemil Bey in Education

ERIC Educational Resources Information Center

Avci Akbel, Burcu

2017-01-01

There is a necessity for listening to and even probing into the recordings of the performers who reached the level of mastery in the performance of Turkish Classical Music, which is based on master-apprentice relationship. In this sense, the recordings of Tanburi Cemil Bey, who opened a new era for the next generations with his performances, and…

Une epreuve orale de francais en fin d'etudes de gestion. Construction et implications pedagogiques (An Oral French Exam at the End of a Marketing Program. Construction and Pedagogical Implications).

ERIC Educational Resources Information Center

Crawshaw, Robert H.

1984-01-01

An oral language test administered at the end of a four-year program combining business administration and French is described. The test consists of the formal presentation of a report including numbers, graphics, and text, a discussion of a theoretical issue, and interview. (MSE)

Canadian Journal for the Study of Adult Education = la Revue canadienne pour l'etude de l'education des adultes. 1987-1994.

ERIC Educational Resources Information Center

Canadian Journal for the Study of Adult Education, 1994

1994-01-01

These 17 issues include feature articles and perspectives on the study of adult education, as well as book reviews/recensions of works related to adult education. Some articles are written in English, and some are written in French. Among the feature articles included are the following: "The Fifties: Pivotal Decade in Canadian Adult…

Language Teaching with the Help of Multiple Methods. Collection d'"Etudes linguistiques," No. 21.

ERIC Educational Resources Information Center

Nivette, Jos, Ed.

This book presents articles on language teaching media. Among the titles are: (1) "Il Foreign Language Teaching e l'impiego degli audio-visivi" (Foreign Language Teaching and the Use of Audio Visual Methods) by D'Agostino, (2) "Le role et la nature de l'image dans l'enseignement programme de l'anglais, langue seconde" (The Role and Nature of the…

Canadian Mathematics Education Study Group = Groupe Canadian d'Etude en Didactique des Mathmatiques. Proceedings of the Annual Meeting (Burnaby, British Columbia, Canada, May 25-29, 1990).

ERIC Educational Resources Information Center

Quigley, Martyn, Ed.

These conference proceedings include two invited lectures, three working group reports, three topic group reports, two Ad Hoc group reports, a round table report, a list of participants, and a list of previous proceedings. The invited lectures were: "Values in Mathematics Education" (Ubiratan D'Ambrosio) and "Remarks on…

Adult Literacy: Policies, Programs and Practices. Lessons Learned. Final Report = Alphabetisation des adultes: politiques, programmes et pratiques. Etude bilan. Rapport final.

ERIC Educational Resources Information Center

2001

Studies and reports examining the problems associated with adult literacy and efforts to address those problems were reviewed to identify lessons for adult literacy programs in Canada and elsewhere. Low literacy levels were linked to above-average rates of personal and/or learning difficulties, low self-esteem, associated social problems, and…

Human factors evaluation of level 2 and level 3 automated driving concepts : concepts of operation.

DOT National Transportation Integrated Search

2014-07-01

The Concepts of Operation document evaluates the functional framework of operations for Level 2 and Level 3 automated vehicle systems. This is done by defining the varying levels of automation, the operator vehicle interactions, and system components...

Ground Operations Aerospace Language (GOAL) textbook

NASA Technical Reports Server (NTRS)

Dickison, L. R.

1973-01-01

The textbook provides a semantical explanation accompanying a complete set of GOAL syntax diagrams, system concepts, language component interaction, and general language concepts necessary for efficient language implementation/execution.

Teaching the Substitutive Conception of the Equals Sign

ERIC Educational Resources Information Center

Jones, Ian; Inglis, Matthew; Gilmore, Camilla; Evans, Rhys

2013-01-01

A cumulative body of research has shown that children typically shift from an "operational" to a "relational" conception of the equals sign as they move through schooling. Jones (2008) argued that a truly relational conception of the equals sign comprises a "substitutive" component and a "sameness"…

Improved components for engine fuel savings

NASA Technical Reports Server (NTRS)

Antl, R. J.; Mcaulay, J. E.

1980-01-01

NASA programs for developing fuel saving technology include the Engine Component Improvement Project for short term improvements in existing air engines. The Performance Improvement section is to define component technologies for improving fuel efficiency for CF6, JT9D and JT8D turbofan engines. Sixteen concepts were developed and nine were tested while four are already in use by airlines. If all sixteen concepts are successfully introduced the gain will be fuel savings of more than 6 billion gallons over the lifetime of the engines. The improvements include modifications in fans, mounts, exhaust nozzles, turbine clearance and turbine blades.

Exploring the Relationship between Secondary Science Teachers' Subject Matter Knowledge and Knowledge of Student Conceptions While Teaching Evolution by Natural Selection

ERIC Educational Resources Information Center

Lucero, Margaret M.; Petrosino, Anthony J.; Delgado, Cesar

2017-01-01

The fundamental scientific concept of evolution occurring by natural selection is home to many deeply held alternative conceptions and considered difficult to teach. Science teachers' subject matter knowledge (SMK) and the pedagogical content knowledge (PCK) component of knowledge of students' conceptions (KOSC) can be valuable resources for…

[The Construction of a Mental Health Component for the National Survey: NMHS 2015, Colombia].

PubMed

de Santacruz, Cecilia; Torres, Nubia; Gómez-Restrepo, Carlos; Matallana, Diana; Borda, Juan Pablo

2016-12-01

Usually, mental health has been defined as the absence of mental disorders. In order to approach this concept in a plain sanitas way, it was considered necessary to crosslink a component for the National Mental Health Survey 2015 (NMHS; ENSM for its acronym in Spanish), that would respond to the specific orientation and particularities of the country. To describe the structure and contents of the mental health component of the NMHS 2015 for the Colombian population over 7 years of age. Review, documentary analysis and discussion regarding the concepts and tools with the team in charge of the NMHS and other groups. 353 documents were reviewed, and 180 were analyzed and discussed. The component model is presented, considering the ethic dimension of relationship care as a main element; it merges two inquiry dimensions or categories: subjective-relational, and social-collective. The structured mental health component provides information regarding the entire population. It also allows understanding and approaching the concept of mental health as a personal and collective "good life". Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Brain Representations of Basic Physics Concepts

NASA Astrophysics Data System (ADS)

Just, Marcel Adam

2017-09-01

The findings concerning physics concepts build on the remarkable new ability to determine the neural signature (or activation pattern) corresponding to an individual concept using fMRI brain imaging. Moreover, the neural signatures can be decomposed into meaningful underlying dimensions, identifying the individual, interpretable components of the neural representation of a concept. The investigation of physics concepts representations reveals how relatively recent physics concepts (formalized only in the last few centuries) are stored in the millenia-old information system of the human brain.

Concepts of formal concept analysis

NASA Astrophysics Data System (ADS)

Žáček, Martin; Homola, Dan; Miarka, Rostislav

2017-07-01

The aim of this article is apply of Formal Concept Analysis on concept of world. Formal concept analysis (FCA) as a methodology of data analysis, information management and knowledge representation has potential to be applied to a verity of linguistic problems. FCA is mathematical theory for concepts and concept hierarchies that reflects an understanding of concept. Formal concept analysis explicitly formalizes extension and intension of a concept, their mutual relationships. A distinguishing feature of FCA is an inherent integration of three components of conceptual processing of data and knowledge, namely, the discovery and reasoning with concepts in data, discovery and reasoning with dependencies in data, and visualization of data, concepts, and dependencies with folding/unfolding capabilities.

Integrated Composite Stiffener Structure (ICoSS) Concept for Planetary Entry Vehicles

NASA Technical Reports Server (NTRS)

Kellas, Sotiris

2016-01-01

Results from the design, manufacturing, and testing of a lightweight Integrated Composite Stiffened Structure (ICoSS) concept, intended for multi-mission planetary entry vehicles are presented. Tests from both component and full-scale tests for a typical Earth Entry Vehicle forward shell manufactured using the ICoSS concept are presented and advantages of the concept for the particular application of passive Earth Entry Vehicles over other structural concepts are discussed.

Neural representations of the concepts in simple sentences: Concept activation prediction and context effects.

PubMed

Just, Marcel Adam; Wang, Jing; Cherkassky, Vladimir L

2017-08-15

Although it has been possible to identify individual concepts from a concept's brain activation pattern, there have been significant obstacles to identifying a proposition from its fMRI signature. Here we demonstrate the ability to decode individual prototype sentences from readers' brain activation patterns, by using theory-driven regions of interest and semantic properties. It is possible to predict the fMRI brain activation patterns evoked by propositions and words which are entirely new to the model with reliably above-chance rank accuracy. The two core components implemented in the model that reflect the theory were the choice of intermediate semantic features and the brain regions associated with the neurosemantic dimensions. This approach also predicts the neural representation of object nouns across participants, studies, and sentence contexts. Moreover, we find that the neural representation of an agent-verb-object proto-sentence is more accurately characterized by the neural signatures of its components as they occur in a similar context than by the neural signatures of these components as they occur in isolation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Life extending control: A concept paper

NASA Technical Reports Server (NTRS)

Lorenzo, Carl F.; Merrill, Walter C.

1991-01-01

The concept of Life Extending Control is defined. Life is defined in terms of mechanical fatigue life. A brief description is given of the current approach to life prediction using a local, cyclic, stress-strain approach for a critical system component. An alternative approach to life prediction based on a continuous functional relationship to component performance is proposed.Base on cyclic life prediction an approach to Life Extending Control, called the Life Management Approach is proposed. A second approach, also based on cyclic life prediction, called the Implicit Approach, is presented. Assuming the existence of the alternative functional life prediction approach, two additional concepts for Life Extending Control are presented.

A space crane concept for performing on-orbit assembly

NASA Technical Reports Server (NTRS)

Dorsey, John T.

1992-01-01

The topics are presented in viewgraph form and include: in-space assembly and construction enhances future mission planning flexibility; in-space assembly and construction facility concept; space crane concept with mobile base; fundamental characteristics; space crane research approach; spacecraft component positioning and assembly test-bed; and articulating joint testbed.

Alternative Conceptions of Wisdom: An Onion-Peeling Exercise.

ERIC Educational Resources Information Center

Blanchard-Fields, Fredda; And Others

1987-01-01

Discusses contextualistic and integrative approaches to the concept of wisdom, and the evolution of the concept from an independent construct of intelligence to a component of intelligence, i.e., practical intelligence. Suggests operationalization of wisdom as the ability to integrate cognition and affect. Illustrates the integrative approach with…

Concept for a Differential Lock and Traction Control Model in Automobiles

NASA Astrophysics Data System (ADS)

Shukul, A. K.; Hansra, S. K.

2014-01-01

The automobile is a complex integration of electronics and mechanical components. One of the major components is the differential which is limited due to its shortcomings. The paper proposes a concept of a cost effective differential lock and traction for passenger cars to sports utility vehicles alike, employing a parallel braking mechanism coming into action based on the relative speeds of the wheels driven by the differential. The paper highlights the employment of minimum number of components unlike the already existing systems. The system was designed numerically for the traction control and differential lock for the world's cheapest car. The paper manages to come up with all the system parameters and component costing making it a cost effective system.

Proceedings of the Annual Conference of the Canadian Association for the Study of Adult Education = Les actes du congres annuel de l'association canadienne pour l'etude de l'education des adultes (8th, Cornwall, Ontario, June 1-30, 1989).

ERIC Educational Resources Information Center

Bedard, Rene, Ed.

This proceedings contains 23 papers in French and the following 45 papers in English: "Arthur Lismer" (Barer-Stein); "Bootstrapping and Shoestringing to Academic Respectability" (Baskett); "Teaching by Teleconference" (Boak, Kirby); "Doing What Is Possible" (Butterwick); "Connections between Individual…

Proceedings of the Annual Conference of the Canadian Association for the Study of Adult Education/L'Association Canadienne pour L'Etude de L'Education des Adultes (17th, Ontario, Canada, May 29-31, 1998).

ERIC Educational Resources Information Center

Taylor, Maurice, Ed.

These proceedings on the theme, Adult Education Research: Shaping the Future, contain 52 papers. The papers are: "Virtual Adult Education" (W. Archer and D. Conrad); "Reversal Theory Approach to Adult Learning and Education" (M. Atleo); "Objectiver L'Action" (A. Balleux et al.); "Cultural Constructions of…

The Effects of Corona on Current Surges Induced on Conducting Lines by EMP (Electromagnetic Pulse): A Comparison of Experiment Data with Results of Analytic Corona Models

DTIC Science & Technology

1987-09-01

196. M. Schechter, A.D.A., P. 0. Box 2250 (81), Haifa, 31021, ISRAEL 197. D. Serafin, Cente d’Etudes de Gramat , 46500 Gramst, FRANCE 198. Peter Sevat...Managing Director, GERAC, B.P. 19 - 46500 Gramat FRANCE 202. Carol Smeerdon, Royal Aircraft Establishment, Flight Systems, BLdg. Q153, Farnborough

Contribution a l'etude de la nouvelle immigration libanaise au Quebec (Contribution to the Study of the New Lebanese Immigration to Quebec).

ERIC Educational Resources Information Center

Abou, Selim

This study, the result of interviews conducted in Quebec and Montreal in the spring of 1975, deals with the adaptation, integration, and acculturation of the Lebanese immigrants in Quebec since the end of World War II. This new immigration wave is contrasted with the one that took place around 1880. Generally speaking, the situation in both the…

Adult Education in a Changing Europe: A Survey of Theory and Practice. [L'Education des Adultes dans une Societe en Constante Evolution; Etude sur la Theorie et la Pratique.

ERIC Educational Resources Information Center

Hutchinson, E. M.; And Others

This course was held to review research and investigations undertaken in Europe, their significance for the practice of adult education, and the possibility of cooperative action in the future. Delegates reached conclusions calling for the general review of European adult education, bibliographic services, general and joint research, cooperation,…

Canadian Mathematics Education Study Group = Groupe Canadien d'etude en didactique des mathematiques. Proceedings of the Annual Meeting (23rd, St. Catherine's, ON, June 4-8, 1999).

ERIC Educational Resources Information Center

McLoughlin, John Grant, Ed.

This document contains the proceedings of 1999 annual meeting of the Canadian Mathematics Education Study Group (CMESG). Papers include: (1) "Mathematics Lecture I: The Impact of Technology on the Doing of Mathematics" (Jonathan Borwein); (2) "Mathematics Lecture II: The Decline and Rise of Geometry in 20th Century North America" (Walter…

Afterrise: Deep Body Temperature Following Exercise

DTIC Science & Technology

1992-03-01

Egalement, les effets de la posture et des v~tements durant la recuperation et la temperature de la salle de recuperation furent examines. Cinq hommes se...chemise a manches courtes). Les temperatures rectales et de la peau furent mesurees A chaque minute durant les exercices et la r~cup~ration affectaient...overgarment. RESUME Cette etude fut entreprise pour documenter l’augmentation continue de la temperature rectale apres exercice dans la chaleur

Canadian Mathematics Education Study Group = Groupe Canadien d'etude en didactique des mathematiques. Proceedings of the 1993 Annual Meeting (York, Ontario, Canada, May 28-June 1, 1993).

ERIC Educational Resources Information Center

Quigley, Martyn, Ed.

These proceedings contain papers presented at the 1993 annual meeting of the Canadian Mathematics Education Study Group. Papers are presented in four sections: (1) invited lectures; (2) working groups; (3) topic groups; and (4) ad hoc groups. Papers include: (1) "What is a Square Root? A Study of Geometrical Representation in Different…

STS-93 crewmembers assemble for crew inflight portrait on the middeck

NASA Image and Video Library

2013-11-18

STS093-322-017 (23-27 July 1999) --- The five STS-93 astronauts pose for the traditional inflight crew portrait on Columbia's middeck. In front are astronauts Eileen M. Collins, mission commander, and Michel Tognini, mission specialist, representing France's Centre National d'Etudes Spatiales (CNES). Behind them are (from the left) astronauts Steven A. Hawley, mission specialist; Jeffrey S. Ashby, pilot; and Catherine G. (Cady) Coleman, mission specialist.

Canadian Mathematics Education Study Group = Groupe Canadien d'etude en didactique des mathematiques. Proceedings of the 1994 Annual Meeting (Regina, Saskatchewan, Canada, June 3-7, 1994).

ERIC Educational Resources Information Center

Quigley, Martyn, Ed.

These proceedings contain papers from the 1994 annual meeting of the Canadian Mathematics Education Study Group. Papers are divided into the following sections: (1) invited lectures; (2) working groups; (3) topic groups; (4) ad hoc groups; and (5) reports on ICMI (International Committee on Mathematical Instruction) studies. Papers include: (1)…

The Pedagogical Value of Leo Brouwer's "Etudes Simples": A Perspective on Preserving an Exquisite, Yet Neglected Custom

ERIC Educational Resources Information Center

Kronenberg, Clive W.

2013-01-01

The decline in the status of the classical guitar is, for many, a cause of concern, calling for viable answers to restore its place in the expressive arts tradition. In this article, I explore a pedagogical style specifically intended for young and/or inexperienced players. It is argued that this endeavor could prospectively benefit a range of…

The abject gaze and the homosexual body: Flandrin's Figure d'Etude.

PubMed

Camille, M

1994-01-01

This article charts the history of the reception, reproduction and appropriation of a single image that has recently become a kind of "gay icon"--the Figure d'Etude in the Louvre, painted by Hippolyte Flandrin in 1835. Initially no more than a neo-classical academic exercise, the formal emptiness of this picture meant that it could be re-invested and reinscribed with new meanings and new titles at every turn. Emblematic of the anxious visibility/invisibility of the newly discovered homosexual body during a period when the gaze still had to be kept a dark secret, Flandrin's image only "came out" in its later photographic reworkings by Frederick Holland Day and Baron von Gloeden. After being reproduced for a specifically homosexual audience early this century, the popular Romantic pose of the young man curled-up in profile became a standard one, reappearing recently in the photographs of Robert Mapplethorpe. The inactive, abject and inward-turned isolation of the figure with its narcissistic self-absorption makes it, in my view, a profoundly negative stereotype of the gay gaze and the homosexual body. Flandrin's figure nonetheless appears today on gay merchandise world-wide as a sign of our separate and secluded subject positions and our community's unwillingness to radically alter older imposed and inherited classical stereotypes.

Disentangling the effects of working memory, language, parental education, and non-verbal intelligence on children’s mathematical abilities

PubMed Central

Pina, Violeta; Fuentes, Luis J.; Castillo, Alejandro; Diamantopoulou, Sofia

2014-01-01

It is assumed that children’s performance in mathematical abilities is influenced by several factors such as working memory (WM), verbal ability, intelligence, and socioeconomic status. The present study explored the contribution of those factors to mathematical performance taking a componential view of both WM and mathematics. We explored the existing relationship between different WM components (verbal and spatial) with tasks that make differential recruitment of the central executive, and simple and complex mathematical skills in a sample of 102 children in grades 4–6. The main findings point to a relationship between the verbal WM component and complex word arithmetic problems, whereas language and non-verbal intelligence were associated with knowledge of quantitative concepts and arithmetic ability. The spatial WM component was associated with the subtest Series, whereas the verbal component was with the subtest Concepts. The results also suggest a positive relationship between parental educational level and children’s performance on Quantitative Concepts. These findings suggest that specific cognitive skills might be trained in order to improve different aspects of mathematical ability. PMID:24847306

Conceptions of Happiness and Unhappiness among Italian Psychology Undergraduates.

PubMed

Sotgiu, Igor

2016-01-01

The present study aims at investigating the conceptions of happiness and unhappiness in a sample of Italian psychology undergraduates. Participants completed a questionnaire asking them to report the most important things that made them feel happy (happiness components) and those ones that made them feel unhappy (unhappiness components). Different measures of overall happiness and overall unhappiness were also obtained by asking respondents to assess to what extent each reported happiness and unhappiness component was present in their life, and by inviting them to provide a global judgment about their happiness and unhappiness. Results indicated that participants did not conceptualize happiness and unhappiness as perfect antonyms. Indeed, both investigated concepts encompassed a similar set of semantic components; however, the perceived salience of some of them - assessed in terms of frequency of citation and average ranking - significantly varied between happiness and unhappiness. With regard to the measurement of overall happiness and unhappiness, on average, respondents considered themselves as moderately happy and only slightly unhappy. However, a judgmental asymmetry was found when comparing global and specific evaluations of unhappiness. Theoretical and empirical implications of the study are discussed.

Conceptions of Happiness and Unhappiness among Italian Psychology Undergraduates

PubMed Central

2016-01-01

The present study aims at investigating the conceptions of happiness and unhappiness in a sample of Italian psychology undergraduates. Participants completed a questionnaire asking them to report the most important things that made them feel happy (happiness components) and those ones that made them feel unhappy (unhappiness components). Different measures of overall happiness and overall unhappiness were also obtained by asking respondents to assess to what extent each reported happiness and unhappiness component was present in their life, and by inviting them to provide a global judgment about their happiness and unhappiness. Results indicated that participants did not conceptualize happiness and unhappiness as perfect antonyms. Indeed, both investigated concepts encompassed a similar set of semantic components; however, the perceived salience of some of them − assessed in terms of frequency of citation and average ranking − significantly varied between happiness and unhappiness. With regard to the measurement of overall happiness and unhappiness, on average, respondents considered themselves as moderately happy and only slightly unhappy. However, a judgmental asymmetry was found when comparing global and specific evaluations of unhappiness. Theoretical and empirical implications of the study are discussed. PMID:27977718

Outcome measures in older persons with acquired joint contractures: a systematic review and content analysis using the ICF (International Classification of Functioning, Disability and Health) as a reference.

PubMed

Bartoszek, Gabriele; Fischer, Uli; Müller, Martin; Strobl, Ralf; Grill, Eva; Nadolny, Stephan; Meyer, Gabriele

2016-02-09

Joint contractures are a common health problem in older persons with significant impact on activities of daily living. We aimed to retrieve outcome measures applied in studies on older persons with joint contractures and to identify and categorise the concepts contained in these outcome measures using the ICF (International Classification of Functioning, Disability and Health) as a reference. Electronic searches of Medline, EMBASE, CINAHL, Pedro and the Cochrane Library were conducted (1/2002-8/2012). We included studies in the geriatric rehabilitation and nursing home settings with participants aged ≥ 65 years and with acquired joint contractures. Two independent reviewers extracted the outcome measures and transferred them to concepts using predefined conceptual frameworks. Concepts were subsequently linked to the ICF categories. From the 1057 abstracts retrieved, 60 studies met the inclusion criteria. We identified 52 single outcome measures and 24 standardised assessment instruments. A total of 1353 concepts were revealed from the outcome measures; 96.2% could be linked to 50 ICF categories in the 2nd level; 3.8% were not categorised. Fourteen of the 50 categories (28%) belonged to the component Body Functions, 4 (8%) to the component Body Structures, 26 (52%) to the component Activities and Participation, and 6 (12%) to the component Environmental Factors. The ICF is a valuable reference for identifying and quantifying the concepts of outcome measures on joint contractures in older people. The revealed ICF categories remain to be validated in populations with joint contractures in terms of clinical relevance and personal impact.

Electric Motors for Non-Cryogenic Hybrid Electric and Turboelectric Propulsion

NASA Technical Reports Server (NTRS)

Duffy, Kirsten P.

2015-01-01

NASA Glenn Research Center is investigating hybrid electric and turboelectric propulsion concepts for future aircraft to reduce fuel burn, emissions, and noise. Systems studies show that the weight and efficiency of the electric system components need to be improved for this concept to be feasible. However, advances in motor component materials such as soft magnetic materials, hard magnetic materials, conductors, thermal insulation, and structural materials are expected in the coming years, and should improve motor performance. This study investigates several motor types for a one megawatt application, and projects the motor performance benefits of new component materials that might be available in the coming decades.

Electric Motor Considerations for Non-Cryogenic Hybrid Electric and Turboelectric Propulsion

NASA Technical Reports Server (NTRS)

Duffy, Kirsten P.

2015-01-01

NASA Glenn Research Center is investigating hybrid electric and turboelectric propulsion concepts for future aircraft to reduce fuel burn, emissions, and noise. Systems studies show that the weight and efficiency of the electric system components need to be improved for this concept to be feasible. However, advances in motor component materials such as soft magnetic materials, hard magnetic materials, conductors, thermal insulation, and structural materials are expected in the coming years, and should improve motor performance. This study investigates several motor types for a one megawatt application, and projects the motor performance benefits of new component materials that might be available in the coming decades.

The Relationship between Academics' Conceptions of Knowledge, Research and Teaching--A Metaphor Study

ERIC Educational Resources Information Center

Visser-Wijnveen, Gerda J.; Van Driel, Jan H.; Van Der Rijst, Roeland M.; Verloop, Nico; Visser, Anthonya

2009-01-01

Universities are supposed to be institutes where research and teaching are closely related. To understand this relationship fully, it is necessary to learn how academics perceive these key components. Different conceptions among academics may stem from varying conceptions of knowledge. Thirty academics were interviewed by means of metaphors about…

Efficient concepts for large erectable space structures

NASA Technical Reports Server (NTRS)

Card, M. F.; Bush, H. G.; Heard, W. L., Jr.; Mikulas, M. M., Jr.

1978-01-01

The status of Langley Research Center development of the nestable column concept is reviewed including results of member and truss component tests, and planned assembly studies. In addition, more recent studies of alternative member concepts are presented. Preliminary results on relative efficiency of several types of truss-type columns are compared and future test plans discussed.

Breadth of Perspective--An Important Concept for Public Relations.

ERIC Educational Resources Information Center

Culbertson, Hugh M.

"Breadth of perspective" is a significant concept for definition of public goals, especially in line with the two-way symmetric model of public relations practice. The concept involves four components: (1) awareness that more than one definition, stand, or conclusion is possible and is probably accepted as valid by significant persons or…

The Formation of Initial Components of Number Concepts in Mexican Children

ERIC Educational Resources Information Center

Solovieva, Yulia; Quintanar, Luis; Ortiz, Gerardo

2012-01-01

The initial formation of number concept represents one of the essential aspects of learning mathematics at the primary school. Children commonly show strong difficulties and absence of comprehension of symbolic and abstract nature of concept of number. The objective of the present study was to show the effectiveness of original method for…

Differentiating Instruction: As Easy as One, Two, Three

ERIC Educational Resources Information Center

Shepherd, Carol; Acosta-Tello, Enid

2015-01-01

Using the "Three Phase Lesson" model, teachers identify prior knowledge that the student must possess in order to be successful in learning the new concepts. Teachers then delineate specific components inherent in the concepts that need to be mastered and identify tasks which will enable the student to practice these new concepts.

Adults' Perceptions of Concept Learning Outcomes: An Initial Study and Discussion.

ERIC Educational Resources Information Center

Wilson, Brent G.; Tessmer, Martin

This paper reports on an empirical study of educators' perceptions of learning concepts, reviews the cognitive learning literature, and argues for an expanded view of conceptual knowledge and its role in education and training. The report begins with discussions of changing views of concept learning and declarative and procedural components of…

Beyond Sovereignty: The Twofold Subversion of "Bildung"

ERIC Educational Resources Information Center

Reichenbach, Roland

2003-01-01

Few concepts in the German tradition of human studies--the so-called "Geisteswissenschaften"--have had the capacity to birth such intense expectations and hopes as the concept of "Bildung". There is general agreement that the concept of "Bildung" includes both an objective and a subjective component. The first refers to "culture" in its broadest…

Using Scatterplots to Teach the Critical Power Concept

ERIC Educational Resources Information Center

Pettitt, Robert W.

2012-01-01

The critical power (CP) concept has received renewed attention and excitement in the academic community. The CP concept was originally conceived as a model derived from a series of exhaustive, constant-load, exercise bouts. All-out exercise testing has made quantification of the parameters for the two-component model easier to arrive at, which may…

Elaboration de revetements nanocomposites avec des proprietes superhydrophobes, semi-conductrices et photocatalytiques

NASA Astrophysics Data System (ADS)

Madidi, Fatima Zahra

Les lignes aeriennes de transport et de distribution de l'energie electrique sont souvent exposees a diverses contraintes. Parmi celles-ci, la pollution des isolateurs constitue l'un des facteurs de premiere importance dans la fiabilite du transport d'energie. En effet, la presence de pollution sur les isolateurs lorsqu'elle est humidifiee entraine la diminution de leur performance electrique en favorisant l'apparition d'arcs de contournement. De telles pannes peuvent parfois causer des impacts socioeconomiques importants. Par ailleurs, le developpement de nouveaux revetements pour ces isolateurs peut s'averer un moyen efficace pour les proteger contre l'apparition de l'arc de contournement. Les revetements superhydrophobes ont fait l'objet de nombreuses etudes au cours de ces dernieres annees. Ces surfaces sont preparees en combinant une rugosite nano-microstructuree avec une faible energie de surface. En outre, de telles surfaces ont de nombreuses applications si elles sont durables et n'ont pas d'effets nocifs sur l'environnement. L'objectif principal de la presente etude vise d'abord l'elaboration de revetements superhydrophobes, puis l'etude de leur duree de vie, leurs proprietes dielectriques et photocatalytiques. Une grande variete de materiaux a faible energie de surface peuvent etre utilises pour le developpement de ces revetements. Dans cette recherche, le caoutchouc de silicone (CS) est employe car il presente de nombreuses proprietes, notamment une forte hydrophobie, une resistance aux rayonnements ultraviolets, et une bonne tenue au feu sans degagement de produits toxiques. Toutefois, le point faible de ces materiaux est la degradation de leurs proprietes hydrophobes. Afin d'ameliorer certaines proprietes du caoutchouc de silicone, des nanoparticules seront additionnees au polymere de base. La technique d'elaboration des revetements consiste a ajouter des nanoparticules de dioxyde de titane (TiO2) au polymere de base, par des methodes ayant un potentiel d'applications industrielles. Les parametres d'elaboration ont ete optimises afin d'obtenir des revetements stables presentant des angles de contact eleves avec des gouttelettes d'eau et de faibles hysteresis. Apres avoir obtenu des surfaces superhydrophobes, des tests de stabilite ont ete effectues dans des conditions de vieillissement accelere tels que l'immersion dans des solutions aqueuses avec differents pH et conductivites ou la degradation par rayonnement UV. Les resultats obtenus ont montre que l'ajout de nanoparticules de dioxyde de titane au caoutchouc de silicone permet d'ameliorer l'hydrophobie et la stabilite de ce polymere. Les revetements superhydrophobes obtenus ont pu maintenir leur superhydrophobicite apres plusieurs jours d'immersion dans differentes solutions aqueuses. Ils presentent aussi une bonne stabilite lorsqu'ils sont exposes aux rayons UV ainsi qu'une stabilite mecanique. De plus, on a pu developper des revetements nanocomposites et microcomposites avec de bonnes proprietes dielectriques. L'etude des proprietes photocatalytiques des revetements superhydrophobes ont montre que l'adsorption des molecules reactives (polluants) sur la surface du catalyseur (TiO2) est le parametre cle de l'activite photocatalytique. L'augmentation de la concentration de TiO2 conduit a une diminution de la concentration du polluant et par consequent a un excellent rendement photocatalytique.

Defining quality of nursing work life.

PubMed

Brooks, Beth A; Anderson, Mary Ann

2005-01-01

As the largest single employee component of hospitals, nurses are critical to the functioning of the organization, and improving employee productivity continues to be a common theme in the health care literature. However, any increased productivity will be transitory if achieved at the expense of the quality of nurses' work life (QNWL), since improvement in the QNWL is prerequisite to improved productivity. The conceptual components of the concept of QNWL that differentiate QNWL from the concept job satisfaction are explored.

Full scale technology demonstration of a modern counterrotating unducted fan engine concept: Component test

NASA Technical Reports Server (NTRS)

1987-01-01

The UDF trademark (Unducted Fan) engine is a new aircraft engine concept based on an ungeared, counterrotating, unducted, ultra-high-bypass turbofan configuration. This engine is being developed to provide a high thrust-to-weight ratio powerplant with exceptional fuel efficiency for subsonic aircraft application. This report covers the testing of pertinent components of this engine such as the fan blades, control and actuation system, turbine blades and spools, seals, and mixer frame.

Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application. Phase 3 Summary report: Shear web component testing and analysis

NASA Technical Reports Server (NTRS)

Laakso, J. H.; Straayer, J. W.

1973-01-01

Three large scale advanced composite shear web components were tested and analyzed to evaluate application of the design concept to a space shuttle orbiter thrust structure. The shear web design concept consisted of a titanium-clad + or - 45 deg boron/epoxy web laminate stiffened with vertical boron/epoxy reinforced aluminum stiffeners. The design concept was evaluated to be efficient and practical for the application that was studied. Because of the effects of buckling deflections, a requirement is identified for shear buckling resistant design to maximize the efficiency of highly-loaded advanced composite shear webs. An approximate analysis of prebuckling deflections is presented and computer-aided design results, which consider prebuckling deformations, indicate that the design concept offers a theoretical weight saving of 31 percent relative to all metal construction. Recommendations are made for design concept options and analytical methods that are appropriate for production hardware.

An aerodynamic assessment of various supersonic fighter airplanes based on Soviet design concepts

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1983-01-01

The aerodynamic, stability, and control characteristics of several supersonic fighter airplane concepts were assessed. The configurations include fixed-wing airplanes having delta wings, swept wings, and trapezoidal wings, and variable wing-sweep airplanes. Each concept employs aft tail controls. The concepts vary from lightweight, single engine, air superiority, point interceptor, or ground attack types to larger twin-engine interceptor and reconnaissance designs. Results indicate that careful application of the transonic or supersonic area rule can provide nearly optimum shaping for minimum drag for a specified Mach number requirement. Through the proper location of components and the exploitation of interference flow fields, the concepts provide linear pitching moment characteristics, high control effectiveness, and reasonably small variations in aerodynamic center location with a resulting high potential for maneuvering capability. By careful attention to component shaping and location and through the exploitation of local flow fields, favorable roll-to-yaw ratios may result and a high degree of directional stability can be achieved.

Concept analysis of culture applied to nursing.

PubMed

Marzilli, Colleen

2014-01-01

Culture is an important concept, especially when applied to nursing. A concept analysis of culture is essential to understanding the meaning of the word. This article applies Rodgers' (2000) concept analysis template and provides a definition of the word culture as it applies to nursing practice. This article supplies examples of the concept of culture to aid the reader in understanding its application to nursing and includes a case study demonstrating components of culture that must be respected and included when providing health care.

Components for digitally controlled aircraft engines

NASA Technical Reports Server (NTRS)

Meador, J. D.

1981-01-01

Control system components suitable for use in digital electronic control systems are defined. Compressor geometry actuation concepts and fuel handling system concepts suitable for use in large high performance turbofan/turbojet engines are included. Eight conceptual system designs were formulated for the actuation of the compressor geometry. Six conceptual system designs were formulated for the engine fuel handling system. Assessment criteria and weighting factors were established and trade studies performed on their candidate systems to establish the relative merits of the various concepts. Fuel pumping and metering systems for small turboshaft engines were also studied. Seven conceptual designs were formulated, and trade studies performed. A simplified bypassing fuel metering scheme was selected and a preliminary design defined.

[Psychometric analysis of the AF5 multidimensional scale of self-concept in a sample of adolescents and adults in Catalonia].

PubMed

Malo Cerrato, Sara; Bataller Sallent, Sílvia; Casas Aznar, Ferran; Gras Pérez, Ma Eugenia; González Carrasco, Mònica

2011-11-01

The aim of this study is to carry out a psychometric study of the AF5 scale in a sample of 4.825 Catalan subjects from 11 to 63 years-old. They are students from secondary compulsory education (ESO), from high school, middle-level vocational training (CFGM) and from the university. Using a principal component analysis (PCA) the theoretical validity of the components is established and the reliability of the instrument is also analyzed. Differential analyses are performed by gender and normative group using a 2 x 6 factorial design. The normative group variable includes the different levels classified into 6 sub-groups: university, post-compulsory secondary education (high school and CFGM), 4th of ESO, 3rd of ESO, 2nd of ESO and 1st of ESO. The results indicate that the reliability of the Catalan version of the scale is similar to the original scale. The factorial structure also fits with the original model established beforehand. Significant differences by normative group in the four components of self-concept explored (social, family, academic/occupational and physical) are observed. By gender, significant differences appear in the component of physical self-concept, academic and social but not in the family component.

Bibliographie annotee de ressources complementaires. Etudes sociales: Secondaire, 7e a 12e (Annotated Bibliography of Further Resources. Social Studies: Secondary School, Grades 7-12).

ERIC Educational Resources Information Center

Soucy, Claire, Comp.; Hebert, Lorraine, Comp.

This annotated bibliography offers resources for teaching the social studies for grades 7 through 12. Subject areas include: (1) grade 7 - culture of Canada and Japan, as well as multicultural and bilingual Canada; (2) grade 8 - the geography of Canada, the United States, and the case of Brazil in South America; (3) grade 9 - economic perspectives…

Higher Education and Social Origin in France: A Statistical Study of Inequalities Since 1965 = Enseignement Superieur Et Origine Sociale En France: Etude Statistique Des Inegalites Depuis 1965

ERIC Educational Resources Information Center

Jaoul, Magali

2004-01-01

Mass education has the goal of guaranteeing the same education to all in order to moderate differences between individuals and promote a kind of "equality of opportunity." Nonetheless, it seems clear that lower-class youths do not benefit as much from their degree or university experience as do those who come from more privileged…

L'E.A.P. ou l'anglais enseigne dans les etudes superieures. Un guide pour le debutant (E.A.P. or English for Academic Purposes: A Guide for the Beginner).

ERIC Educational Resources Information Center

Roe, Peter J.

1981-01-01

Addresses those readers who are not familiar with EAP, offering an introductory discussion of its objectives and methods, in two parts. Devotes the first part to the needs that justify an EAP approach, and the second to its methodology, with particular attention to interdisciplinary, task-oriented instruction. Societe Nouvelle Didier Erudition, 40…

OSSE Observations of 3C 273

DTIC Science & Technology

1995-01-01

1991T, which was discovered on 1991 April 13 (Waagen & Knight 1991) in the spiral galaxy, NGC 4527, on the edge of the Virgo cluster . The OSSE observing...Strickman E.O. Hulburt Center for Space Research , Code 7650 Naval Research Lab, Washington DC 20375 K. McNaron-Brown George Mason University, Fairfax...VA 22030 E. Jourdain Centre d’Etude Spatiale des Rayonnements, Toulouse, France G. V. Jung Universities Space Research Association, Washington DC

Canadian Mathematics Education Study Group = Groupe Canadien d'Etude en Didactique des Mathematiques. Proceedings of the Annual Meeting (24th, Montreal, Quebec, Canada, May 26-30, 2000).

ERIC Educational Resources Information Center

Simmt, Elaine, Ed.; Davis, Brent, Ed.; McLoughlin, John Grant, Ed.

2000-01-01

This document contains the proceedings of the annual meeting of the Canadian Mathematics Education Study Group (CMESG) held at the University of Quebec in Montreal, Canada, May 26-30, 2000. The proceedings consist of two plenary lectures, five working groups, four topic sessions, new Ph.D. reports, and panel discussions. Papers include: (1)…

Managing a Job, a Family, and Studies. A Guide for Educational Institutions and the Workplace = Coordonner emploi, famille, et etudes. Un guide destine' aux institutions d'enseignement et au milieu du travail.

ERIC Educational Resources Information Center

Home, Alice; And Others

This guide, which presents the findings of a 1994 survey of nearly 500 Canadian women who fulfill family and work responsibilities while studying in social work, nursing, and adult education programs, is designed to help employers, educators, advisors, and administrators deal with the increased numbers of female students attempting to balance…

French payload specialist Patrick Baudry prepares a meal

NASA Technical Reports Server (NTRS)

1985-01-01

Payload specialist Patrick Baudry, representing the Centre National d'Etudes Spatiales of France, prepares to open a can of lobster. The bag attached to the nearby middeck locker door appears to contain several other French snacks. His food tray is also attached to the middeck lockers. Behind his head are other food trays attached to the shuttle rehydration unit. A roll of duct tape floats in space to one side of Baudry.

Le contexte du materiel pedagogique dans l'anglais de specialite. Etude sur les themes tires de l'environnement (The Context of Instructional Materials for ESP. A Study of Themes Drawn from the Environment).

ERIC Educational Resources Information Center

Williams, Ray

1981-01-01

Challenges the idea that ESP courses should be based strictly on instructional materials taken from the relevant professional context. Accordingly recommends a multidisciplinary themes approach as illustrated in the detailed description of the methods and materials used in a course offered by the University of Aston (Birmingham). Societe Nouvelle…

Foreign-Language Pedagogy: Practical Applications to Theoretical Concerns. Selected Papers from the Loyola College Conference Entitled "Bridging Theory and Practice in the Foreign-Language Classroom" (Baltimore, Maryland, October 18-20, 1991).

ERIC Educational Resources Information Center

Wieczorek, Joseph A., Ed.

1993-01-01

Papers from the conference include the following: "Activites orales et motivation dans l'etude du vocabulaire d'une langue etrangere (Oral Activities and Motivation in the Study of Vocabulary in a Foreign Language)" (M. Guisset); "Bridging High School and College Classes through the Multicultural Approach: The Case of Francophone…

Analysis of Nuclear Propagation Effects Utilizing Wideband Satellite Data.

DTIC Science & Technology

1981-04-01

integrated phase spectral energy on scales shorter than - 30 km. Like the TEC, the standard deviation of phase depends on the effective thickness of...Vila, P., "Etude Experimentale de L’Anomalie lonospherique Equatoriale en Afrique en Periode de Minimum Solaire ," Annales de Geophysique, Vol. 22, No...AFRDSP AT[: OP 65 ATTN: AFRDSS 82 DEPARTMENT OF THE AIR FORCE (Continued) DEPARTMENT OF ENERGY CONTRACTORS Electronic Systems Div EG&U, Inc Air force

A Survey of Blast Injury across the Full Landscape of Military Science (Etude d’ensemble des blessures dues aux explosions a travers le panorama complet de la science militaire)

DTIC Science & Technology

2011-04-01

Military Science (RTO-MP-HFM-207) Executive Summary Blast injury is a significant source of casualties in current NATO operations. The term “blast...toxicologique du souffle incluant les mécanismes de dose (par exemple, normes d’exposition à un tube à choc ), la description des points limites dose

Etudes sociales 30. Sujet B: Interaction entre nations. Cahier de l'eleve. Edition finale = Social Studies 30. Subject B: Interaction between Nations. Student Workbook. Final Edition.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

In this Alberta (Canada) student workbook, four history units are presented for study. These are: (1) Between Two Wars (1919-1936); (2) World War II; (3) The Emergence and Interaction of the Superpowers; and (4) Contemporary World Interactions. Advice is offered to students in each unit along with information about key events and issues during…

Geographically correlated errors observed from a laser-based short-arc technique

NASA Astrophysics Data System (ADS)

Bonnefond, P.; Exertier, P.; Barlier, F.

1999-07-01

The laser-based short-arc technique has been developed in order to avoid local errors which affect the dynamical orbit computation, such as those due to mismodeling in the geopotential. It is based on a geometric method and consists in fitting short arcs (about 4000 km), issued from a global orbit, with satellite laser ranging tracking measurements from a ground station network. Ninety-two TOPEX/Poseidon (T/P) cycles of laser-based short-arc orbits have then been compared to JGM-2 and JGM-3 T/P orbits computed by the Precise Orbit Determination (POD) teams (Service d'Orbitographie Doris/Centre National d'Etudes Spatiales and Goddard Space Flight Center/NASA) over two areas: (1) the Mediterranean area and (2) a part of the Pacific (including California and Hawaii) called hereafter the U.S. area. Geographically correlated orbit errors in these areas are clearly evidenced: for example, -2.6 cm and +0.7 cm for the Mediterranean and U.S. areas, respectively, relative to JGM-3 orbits. However, geographically correlated errors (GCE) which are commonly linked to errors in the gravity model, can also be due to systematic errors in the reference frame and/or to biases in the tracking measurements. The short-arc technique being very sensitive to such error sources, our analysis however demonstrates that the induced geographical systematic effects are at the level of 1-2 cm on the radial orbit component. Results are also compared with those obtained with the GPS-based reduced dynamic technique. The time-dependent part of GCE has also been studied. Over 6 years of T/P data, coherent signals in the radial component of T/P Precise Orbit Ephemeris (POE) are clearly evidenced with a time period of about 6 months. In addition, impact of time varying-error sources coming from the reference frame and the tracking data accuracy has been analyzed, showing a possible linear trend of about 0.5-1 mm/yr in the radial component of T/P POE.

Evaluation d'une approche pedagogique respectant les facons d'apprendre des filles en sciences et en TIC en 9e annee au Nouveau-Brunswick

NASA Astrophysics Data System (ADS)

Lirette-Pitre, Nicole T.

2009-07-01

La reussite scolaire des filles les amene de plus en plus a poursuivre une formation postsecondaire et a exercer des professions qui demandent un haut niveau de connaissances et d'expertise scientifique. Toutefois, les filles demeurent toujours tres peu nombreuses a envisager une carriere en sciences (chimie et physique), en ingenierie ou en TIC (technologie d'information et de la communication), soit une carriere reliee a la nouvelle economie. Pour plusieurs filles, les sciences et les TIC ne sont pas des matieres scolaires qu'elles trouvent interessantes meme si elles y reussissent tres bien. Ces filles admettent que leurs experiences d'apprentissage en sciences et en TIC ne leur ont pas permis de developper un interet ni de se sentir confiante en leurs habiletes a reussir dans ces matieres. Par consequent, peu de filles choisissent de poursuivre leurs etudes postsecondaires dans ces disciplines. La theorie sociocognitive du choix carriere a ete choisie comme modele theorique pour mieux comprendre quelles variables entrent en jeu lorsque les filles choisissent leur carriere. Notre etude a pour objet la conception et l'evaluation de l'efficacite d'un materiel pedagogique concu specifiquement pour ameliorer les experiences d'apprentissage en sciences et en TIC des filles de 9e annee au Nouveau-Brunswick. L'approche pedagogique privilegiee dans notre materiel a mis en oeuvre des strategies pedagogiques issues des meilleures pratiques que nous avons identifiees et qui visaient particulierement l'augmentation du sentiment d'auto-efficacite et de l'interet des filles pour ces disciplines. Ce materiel disponible par Internet a l'adresse http://www.umoncton.ca/lirettn/scientic est directement en lien avec le programme d'etudes en sciences de la nature de 9e annee du Nouveau-Brunswick. L'evaluation de l'efficacite de notre materiel pedagogique a ete faite selon deux grandes etapes methodologiques: 1) l'evaluation de l'utilisabilite et de la convivialite du materiel et 2) l'evaluation de l'effet du materiel en fonction de diverses variables reliees a l'interet et au sentiment d'auto-efficacite des filles en sciences et en TIC. Cette recherche s'est inscrite dans un paradigme pragmatique de recherche. Le pragmatisme a guide nos choix en ce qui a trait au modele de recherche et des techniques utilisees. Cette recherche a associe a la fois des techniques qualitatives et quantitatives, particulierement en ce qui concerne la collecte et l'analyse de donnees. Les donnees recueillies dans la premiere etape de l'evaluation de l'utilisabilite et de la convivialite du materiel par les enseignantes et les enseignants de sciences et les filles ont revele que le materiel concu est tres utilisable et convivial. Toutefois quelques petites ameliorations seront apportees a une version subsequente afin de faciliter davantage la navigation. Quant a l'evaluation des effets du materiel concu sur les variables reliees au sentiment d'auto-efficacite et aux interets lors de l'etape quasi experimentale, nos donnees qualitatives ont indique que ce materiel a eu des effets positifs sur le sentiment d'auto-efficacite et sur les interets des filles qui l'ont utilise. Toutefois, nos donnees quantitatives n'ont pas permis d'inferer un lien causal direct entre l'utilisation du materiel et l'augmentation du sentiment d'auto-efficacite et des interets des filles en sciences et en TIC. A la lumiere des resultats obtenus, nous avons conclu que le materiel a eu les effets escomptes. Donc, nous recommandons la creation et l'utilisation de materiel de ce genre dans toutes les classes de sciences de la 6e annee a la 12e annee au Nouveau-Brunswick.

Investigation of Exoskeletal Engine Propulsion System Concept

NASA Technical Reports Server (NTRS)

Roche, Joseph M.; Palac, Donald T.; Hunter, James E.; Myers, David E.; Snyder, Christopher A.; Kosareo, Daniel N.; McCurdy, David R.; Dougherty, Kevin T.

2005-01-01

An innovative approach to gas turbine design involves mounting compressor and turbine blades to an outer rotating shell. Designated the exoskeletal engine, compression (preferable to tension for high-temperature ceramic materials, generally) becomes the dominant blade force. Exoskeletal engine feasibility lies in the structural and mechanical design (as opposed to cycle or aerothermodynamic design), so this study focused on the development and assessment of a structural-mechanical exoskeletal concept using the Rolls-Royce AE3007 regional airliner all-axial turbofan as a baseline. The effort was further limited to the definition of an exoskeletal high-pressure spool concept, where the major structural and thermal challenges are represented. The mass of the high-pressure spool was calculated and compared with the mass of AE3007 engine components. It was found that the exoskeletal engine rotating components can be significantly lighter than the rotating components of a conventional engine. However, bearing technology development is required, since the mass of existing bearing systems would exceed rotating machinery mass savings. It is recommended that once bearing technology is sufficiently advanced, a "clean sheet" preliminary design of an exoskeletal system be accomplished to better quantify the potential for the exoskeletal concept to deliver benefits in mass, structural efficiency, and cycle design flexibility.

Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

NASA Astrophysics Data System (ADS)

Metiche, Slimane

La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference entre ces proprietes est due au nombre de couches utilisees dans chaque zone ainsi qu'a l'orientation des fibres de chaque couche. Un total de vingt-trois prototypes de dimensions differentes; ont ete testes en flexion jusqu'a la rupture. Deux types de fibres de verre de masses lineaires differentes, ont ete utilisees afin d'evaluer l'effet du type de fibres sur le comportement a la flexion. Un nouveau montage experimental permettant de tester tous les types de poteaux en PRF a ete dimensionne et fabrique selon les recommandations decrites dans les normes ASTM D 4923-01 et ANSI C 136.20-2005. Un modele analytique base sur la theorie des poutres en elasticite lineaire est propose dans cette these. Ce modele predit avec une bonne precision le comportement experimental charge---deflexion ainsi que la deflexion maximale au sommet des poteaux en PRF; constitues de plusieurs zones de caracteristiques geometriques et mecaniques differentes. Une procedure de dimensionnement des poteaux en PRF, basee sur les resultats experimentaux obtenus dans le cadre de la presente these, est egalement proposee. Les resultats obtenus dans le cadre de la presente these permettront le developpement et l'amelioration des regles de conception utiles et pratiques a l'usage des concepteurs et des industriels du domaine des poteaux en PRF. Les retombees de cette recherche sont a la fois economiques et technologiques, car les resultats obtenus constitueront une banque de donnees qui contribueront au developpement des normes de calcul, et par consequent a l'optimisation des materiaux utilises, et serviront a valider de futurs resultats et modeles theoriques.

Crusader solid propellant best technical approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graves, V.; Bader, G.; Dolecki, M.

1995-12-01

The goal of the Solid Propellant Resupply Team is to develop Crusader system concepts capable of automatically handling 155mm projectiles and Modular Artillery Charges (MACs) based on system requirements. The system encompasses all aspects of handling from initial input into a resupply vehicle (RSV) to the final loading into the breech of the self-propelled howitzer (SPH). The team, comprised of persons from military and other government organizations, developed concepts for the overall vehicles as well as their interior handling components. An intermediate review was conducted on those components, and revised concepts were completed in May 1995. A concept evaluation wasmore » conducted on the finalized concepts, from both a systems level and a component level. The team`s Best Technical Approach (BTA) concept was selected from that evaluation. Both vehicles in the BTA have a front-engine configuration with the crew situated behind the engine-low in the vehicles. The SPH concept utilizes an automated reload port at the rear of the vehicle, centered high. The RSV transfer boom will dock with this port to allow automated ammunition transfer. The SPH rearm system utilizes fully redundant dual loaders. Active magazines are used for both projectiles and MACs. The SPH also uses a nonconventional tilted ring turret configuration to maximize the available interior volume in the vehicle. This configuration can be rearmed at any elevation angle but only at 0{degree} azimuth. The RSV configuration is similar to that of the SPH. The RSV utilizes passive storage racks with a pick-and-place manipulator for handling the projectiles and active magazines for the MACs. A telescoping transfer boom extends out the front of the vehicle over the crew and engine.« less

An ontology-based exploration of the concepts and relationships in the activities and participation component of the international classification of functioning, disability and health.

PubMed

Della Mea, Vincenzo; Simoncello, Andrea

2012-02-28

The International Classification of Functioning, Disability and Health (ICF) is a classification of health and health-related issues, aimed at describing and measuring health and disability at both individual and population levels. Here we discuss a preliminary qualitative and quantitative analysis of the relationships used in the Activities and Participation component of ICF, and a preliminary mapping to SUMO (Suggested Upper Merged Ontology) concepts. The aim of the analysis is to identify potential logical problems within this component of ICF, and to understand whether activities and participation might be defined more formally than in the current version of ICF. In the relationship analysis, we used four predicates among those available in SUMO for processes (Patient, Instrument, Agent, and subProcess). While at the top level subsumption was used in most cases (90%), at the lower levels the percentage of other relationships rose to 41%. Chapters were heterogeneous in the relationships used and some of the leaves of the tree seemed to represent properties or parts of the parent concept rather than subclasses. Mapping of ICF to SUMO proved partially feasible, with the activity concepts being mapped mostly (but not totally) under the IntentionalProcess concept in SUMO. On the other hand, the participation concept has not been mapped to any upper level concept. Our analysis of the relationships within ICF revealed issues related to confusion between classes and their properties, incorrect classifications, and overemphasis on subsumption, confirming what already observed by other researchers. However, it also suggested some properties for Activities that could be included in a more formal model: number of agents involved, the instrument used to carry out the activity, the object of the activity, complexity of the task, and an enumeration of relevant subtasks.

Reactor plasma facing component designs based on liquid metal concepts supported in porous systems

NASA Astrophysics Data System (ADS)

Tabarés, F. L.; Oyarzabal, E.; Martin-Rojo, A. B.; Tafalla, D.; de Castro, A.; Soleto, A.

2017-01-01

The use of liquid metals (LMs) as plasma facing components in fusion devices was proposed as early as 1970 for a field reversed concept and inertial fusion reactors. The idea was extensively developed during the APEX Project, at the turn of the century, and it is the subject at present of the biennial International Symposium on Lithium Applications (ISLA), whose fourth meeting took place in Granada, Spain at the end of September 2015. While liquid metal flowing concepts were specially addressed in USA research projects, the idea of embedding the metal in a capillary porous system (CPS) was put forwards by Russian teams in the 1990s, thus opening the possibility of static concepts. Since then, many ideas and accompanying experimental tests in fusion devices and laboratories have been produced, involving a large fraction of countries within the international fusion community. Within the EUROFusion Roadmap, these activities are encompassed into the working programs of the plasma facing components (PFC) and divertor tokamak test (DTT) packages. In this paper, a review of the state of the art in concepts based on the CPS set-up for a fusion reactor divertor target, aimed at preventing the ejection of the liquid metal by electro-magnetic (EM) forces generated under plasma operation, is described and required R+D activities on the topic, including ongoing work at CIEMAT specifically oriented to filling the remaining gaps, are stressed.

Mobile Building Energy Audit and Modeling Tools: Cooperative Research and Development Final Report, CRADA Number CRD-11-00441

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brackney, L.

Broadly accessible, low cost, accurate, and easy-to-use energy auditing tools remain out of reach for managers of the aging U.S. building population (over 80% of U.S. commercial buildings are more than 10 years old*). concept3D and NREL's commercial buildings group will work to translate and extend NREL's existing spreadsheet-based energy auditing tool for a browser-friendly and mobile-computing platform. NREL will also work with concept3D to further develop a prototype geometry capture and materials inference tool operable on a smart phone/pad platform. These tools will be developed to interoperate with NREL's Building Component Library and OpenStudio energy modeling platforms, and willmore » be marketed by concept3D to commercial developers, academic institutions and governmental agencies. concept3D is NREL's lead developer and subcontractor of the Building Component Library.« less

Connecting Curriculums: Marketing What You Manufacture.

ERIC Educational Resources Information Center

Havice, Bill; Simmons, Bryan

1998-01-01

Discusses how students can apply the concepts from the communications component of their class with instruction in the manufacturing component. Includes goals and objectives, materials and resources, and procedures and outcomes. (Author/JOW)

The next step in biology: a periodic table?

PubMed

Dhar, Pawan K

2007-08-01

Systems biology is an approach to explain the behaviour of a system in relation to its individual components. Synthetic biology uses key hierarchical and modular concepts of systems biology to engineer novel biological systems. In my opinion the next step in biology is to use molecule-to-phenotype data using these approaches and integrate them in the form a periodic table. A periodic table in biology would provide chassis to classify, systematize and compare diversity of component properties vis-a-vis system behaviour. Using periodic table it could be possible to compute higher- level interactions from component properties. This paper examines the concept of building a bio-periodic table using protein fold as the fundamental unit.

Metal Amorphous Nanocomposite (MANC) Alloy Cores with Spatially Tuned Permeability for Advanced Power Magnetics Applications

NASA Astrophysics Data System (ADS)

Byerly, K.; Ohodnicki, P. R.; Moon, S. R.; Leary, A. M.; Keylin, V.; McHenry, M. E.; Simizu, S.; Beddingfield, R.; Yu, Y.; Feichter, G.; Noebe, R.; Bowman, R.; Bhattacharya, S.

2018-04-01

Metal amorphous nanocomposite (MANC) alloys are an emerging class of soft magnetic materials showing promise for a range of inductive components targeted for higher power density and higher efficiency power conversion applications including inductors, transformers, and rotating electrical machinery. Magnetization reversal mechanisms within these alloys are typically determined by composition optimization as well as controlled annealing treatments to generate a nanocomposite structure composed of nanocrystals embedded in an amorphous precursor. Here we demonstrate the concept of spatially varying the permeability within a given component for optimization of performance by using the strain annealing process. The concept is realized experimentally through the smoothing of the flux profile from the inner to outer core radius achieved by a monotonic variation in tension during the strain annealing process. Great potential exists for an extension of this concept to a wide range of other power magnetic components and more complex spatially varying permeability profiles through advances in strain annealing techniques and controls.

Metal Amorphous Nanocomposite (MANC) Alloy Cores with Spatially Tuned Permeability for Advanced Power Magnetics Applications

NASA Astrophysics Data System (ADS)

Byerly, K.; Ohodnicki, P. R.; Moon, S. R.; Leary, A. M.; Keylin, V.; McHenry, M. E.; Simizu, S.; Beddingfield, R.; Yu, Y.; Feichter, G.; Noebe, R.; Bowman, R.; Bhattacharya, S.

2018-06-01

Metal amorphous nanocomposite (MANC) alloys are an emerging class of soft magnetic materials showing promise for a range of inductive components targeted for higher power density and higher efficiency power conversion applications including inductors, transformers, and rotating electrical machinery. Magnetization reversal mechanisms within these alloys are typically determined by composition optimization as well as controlled annealing treatments to generate a nanocomposite structure composed of nanocrystals embedded in an amorphous precursor. Here we demonstrate the concept of spatially varying the permeability within a given component for optimization of performance by using the strain annealing process. The concept is realized experimentally through the smoothing of the flux profile from the inner to outer core radius achieved by a monotonic variation in tension during the strain annealing process. Great potential exists for an extension of this concept to a wide range of other power magnetic components and more complex spatially varying permeability profiles through advances in strain annealing techniques and controls.

Do textbooks used in university reading education courses conform to the instructional recommendations of the national reading panel?

PubMed

Malatesha Joshi, R; Binks, Emily; Graham, Lori; Ocker-Dean, Emily; Smith, Dennie L; Boulware-Gooden, Regina

2009-01-01

Two reasons may be responsible for the poor grasp of the linguistic concepts related to literacy acquisition by preservice and in-service teachers: a lack of attention given to such concepts by teacher educators (college faculty members) and a lack of relevant information provided in the textbooks used in college courses. In an earlier study, the authors found that many teacher educators involved in the training of preservice and in-service teachers were not well acquainted with these concepts. In this study, the authors examined the extent to which textbooks used in reading education courses contain the information about the five components of literacy instruction (phonemic awareness, phonics, fluency, vocabulary, and text comprehension) recommended by the National Reading Panel. Such scrutiny shows that many textbooks do not adequately cover these five components and the related instructional procedures for teaching them. In addition to the paucity of information about teaching the five components, some textbooks present inaccurate information.

Alignment of the Stanford Linear Collider Arcs: Concepts and results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitthan, R.; Bell, B.; Friedsam, H.

1987-02-01

The alignment of the Arcs for the Stanford Linear Collider at SLAC has posed problems in accelerator survey and alignment not encountered before. These problems come less from the tight tolerances of 0.1 mm, although reaching such a tight statistically defined accuracy in a controlled manner is difficult enough, but from the absence of a common reference plane for the Arcs. Traditional circular accelerators, including HERA and LEP, have been designed in one plane referenced to local gravity. For the SLC Arcs no such single plane exists. Methods and concepts developed to solve these and other problems, connected with themore » unique design of SLC, range from the first use of satellites for accelerator alignment, use of electronic laser theodolites for placement of components, computer control of the manual adjustment process, complete automation of the data flow incorporating the most advanced concepts of geodesy, strict separation of survey and alignment, to linear principal component analysis for the final statistical smoothing of the mechanical components.« less

Etude hyperfrequence et ultrasonore des supraconducteurs organiques kappa-(ET)(2)X (X = copper(thiocyanogen), copper[N(CN)(2)]bromine)

NASA Astrophysics Data System (ADS)

Frikach, Kamal

2001-09-01

Dans ce travail je presente une etude de l'impedance de surface, ainsi que de l'attenuation et la variation de la vitesse ultrasonores dans les etats normal et supraconducteur sur les composes organiques k-(ET)2X (X = Cu(SCN) 2, Cu[N(CN)2]Br). A partir des mesures d'impedance de surface, les deux composantes sigma 1 et sigma2 de la conductivite complexe sont extraites en utilisant le modele de Drude. Ces mesures montrent que la symetrie du parametre d'ordre dans ces composes est differente de celle du cas BCS. Afin de comprendre le profil de sigma1 (T) nous avons etudie les fluctuations supraconductrices a partir de la paraconductivite sigma'( T). Cette etude est rendue possible grace a la structure quasi-2D des composes k-(ET)2X dans lesquelles les fluctuations supraconductrices sont fortes. Ces dernieres sont observees sur deux decades de temperatures dans le Cu(SCN)2. L'application du modele de Aslamazov-Larkin 2D et 3D montre la possibilite du passage du regime 2D a haute temperature au regime 3D au voisinage de Tc. En se basant sur ce resultat, nous avons calcule la paraconductivite en utilisant une approche a l'ordre d'une boucle a partir du modele de Lawrence-Doniach. En tenant compte de la correction par la self energie dans la limite dynamique (17 GHz), l'ajustement de la paraconductivite calculee est en bon accord avec les donnees experimentales. Le couplage interplan obtenu est compatible avec le caractere quasi-2D des composes organiques. Le temps de relaxation des quasi-particules dans l'etat supraconducteur est ensuite extrait pour la premiere fois dans ces composes dont le comportement en fonction de la temperature est compatible avec la presence des noeuds dans le gap. Dans l'etat normal, la variation de la vitesse ultrasonore presente un comportement anormal caracterise par un fort ramollissement a T = 38 K et 50 K dans k-(ET) 2Cu(SCN)2 et k-(ET)2Cu[N(CN) 2]Br respectivement dont l'amplitude est independante du champ magnetique jusqu'a H = Hc 2. Cette anomalie semble exister seulement dans les modes qui sondent le couplage interplan. Ce comportement est attribue au couplage entre les fluctuations antiferromagnetiques et les phonons acoustiques.

Etude experimentale des excitations topologiques de l'effet Hall quantique a nu = 1 dans les heterostructures semiconductrices a double puits quantique

NASA Astrophysics Data System (ADS)

Charlebois, Serge

De nombreux travaux theoriques et experimentaux ont ete publies sur les excitations topologiques de gaz electroniques bidimensionnels (GE2D), appellees skyrmions, dans le regime de l'effet Hall quantique a remplissage unitaire. On attend des excitations semblables appellees bimerons dans les systemes formes de deux GE2D couples. Contrairement au cas des GE2D simples, aucune experience n'a, a notre connaissance, presente la mesure d'une propriete specifique aux bimerons. Nous presentons dans cette these des travaux experimentaux ayant pour objectif l'etude d'excitations topologiques dans les heterostructures a double puits quantique. Une manifestation attendue (les bimerons est la presence d'une anisotropie dans la conductivite a travers une constriction. Nous avons concu un dispositif original a point de contact a trois grilles non-coplanaires. Ce dispositif a trois grilles a la particularite de permettre la creation d'une constriction etroite dans le double GE2D tout en permettant l'equilibrage de la densite electronique entre les deux puits dans l'etroit canal de conduction. Nous avons fabrique ce dispositif de taille submicronique par electrolithographie sur des heterostructures a double puits. Les dispositifs ainsi fabriques ont ete etudies a basse temperature (0.3K) et ont montre un fonctionnement conforme aux attentes. Les travaux n'ont pas permis de mettre en evidence une anisotropie de transport revelatrice de l'existence de bimerons. Cette these est a notre connaissance la premiere etude experimentale visant la realisation de l'experience d'anisotropie de transport et est ainsi une contribution significative a l'avancement des connaissances dans ce domaine. Les travaux theoriques que nous presentons ont permis de montrer l'effet des excitations topologiques sur la capacite grille-GE2D du systeme. Ces travaux ouvrent la voie de la detection des bimerons par l'intermediaire de la mesure de la capacite grille-GE2D ou encore de la susceptibilite electrique du GE2D. Poursuivant cet objectif, nous avons concu, realise et teste un dispositif de mesure in situ de la capacite grille-GE2D d'une heterostructure. Nous avons egalement suggere d'autres methodes experimentales pour la mise en evidence des bimerons par le couplage de la texture de pseudospin a la capacite du GE2D.

When Children Learn Programming: Antecedents, Concepts and Outcomes.

ERIC Educational Resources Information Center

Shneiderman, Ben

1985-01-01

Discusses components of an educational plan which supports acquisition of computer programing skills by elementary school children, including antecedent knowledge required (sequencing, similarity, character recognition, part/whole relationships, conditional forms, repetition, and incrementation); initial programing concepts; and outcomes valuable…

Personal Finance: Teaching Concepts and Strategies.

ERIC Educational Resources Information Center

Gioia, John

1989-01-01

The author describes essential components of a course on personal finance. Concepts to be taught are (1) decision making, (2) income generation, (3) goal setting, (4) budgeting, (5) wise buying, (6) housing, (7) transportation, (8) risk management, and (9) investments. (CH)

The Teaching of Sight Words: Ways and Means. Instructional Concept Guide No. 7.

ERIC Educational Resources Information Center

Strader, Susan; And Others

The instructional concept guide is part of a system developed for tutor training and support. It is primarily designed for volunteers, but it can also be adapted to the training of paraprofessional tutors for any type of adult literacy program. A key component in the system is the Tutor Support Library, consisting of Instructional Concept Guides…

The Concepts of PPBS and Approaches to Their Application.

ERIC Educational Resources Information Center

Fielden, John

The basic concepts of the classic PPBS are summarized, and then attention is directed toward the process by which this has been modified by its collision with the values of the university. The form taken by the new modified PPBS is examined and its component concepts and techniques are identified. It is concluded that the new PPBS has limitations…

Safety Guided Design of Crew Return Vehicle in Concept Design Phase Using STAMP/STPA

NASA Astrophysics Data System (ADS)

Nakao, H.; Katahira, M.; Miyamoto, Y.; Leveson, N.

2012-01-01

In the concept development and design phase of a new space system, such as a Crew Vehicle, designers tend to focus on how to implement new technology. Designers also consider the difficulty of using the new technology and trade off several system design candidates. Then they choose an optimal design from the candidates. Safety should be a key aspect driving optimal concept design. However, in past concept design activities, safety analysis such as FTA has not used to drive the design because such analysis techniques focus on component failure and component failure cannot be considered in the concept design phase. The solution to these problems is to apply a new hazard analysis technique, called STAMP/STPA. STAMP/STPA defines safety as a control problem rather than a failure problem and identifies hazardous scenarios and their causes. Defining control flow is the essential in concept design phase. Therefore STAMP/STPA could be a useful tool to assess the safety of system candidates and to be part of the rationale for choosing a design as the baseline of the system. In this paper, we explain our case study of safety guided concept design using STPA, the new hazard analysis technique, and model-based specification technique on Crew Return Vehicle design and evaluate benefits of using STAMP/STPA in concept development phase.

The 2003 edition of geisa: a spectroscopic database system for the second generation vertical sounders radiance simulation

NASA Astrophysics Data System (ADS)

Jacquinet-Husson, N.; Lmd Team

The GEISA (Gestion et Etude des Informations Spectroscopiques Atmosphériques: Management and Study of Atmospheric Spectroscopic Information) computer accessible database system, in its former 1997 and 2001 versions, has been updated in 2003 (GEISA-03). It is developed by the ARA (Atmospheric Radiation Analysis) group at LMD (Laboratoire de Météorologie Dynamique, France) since 1974. This early effort implemented the so-called `` line-by-line and layer-by-layer '' approach for forward radiative transfer modelling action. The GEISA 2003 system comprises three databases with their associated management softwares: a database of spectroscopic parameters required to describe adequately the individual spectral lines belonging to 42 molecules (96 isotopic species) and located in a spectral range from the microwave to the limit of the visible. The featured molecules are of interest in studies of the terrestrial as well as the other planetary atmospheres, especially those of the Giant Planets. a database of absorption cross-sections of molecules such as chlorofluorocarbons which exhibit unresolvable spectra. a database of refractive indices of basic atmospheric aerosol components. Illustrations will be given of GEISA-03, data archiving method, contents, management softwares and Web access facilities at: http://ara.lmd.polytechnique.fr The performance of instruments like AIRS (Atmospheric Infrared Sounder; http://www-airs.jpl.nasa.gov) in the USA, and IASI (Infrared Atmospheric Sounding Interferometer; http://smsc.cnes.fr/IASI/index.htm) in Europe, which have a better vertical resolution and accuracy, compared to the presently existing satellite infrared vertical sounders, is directly related to the quality of the spectroscopic parameters of the optically active gases, since these are essential input in the forward models used to simulate recorded radiance spectra. For these upcoming atmospheric sounders, the so-called GEISA/IASI sub-database system has been elaborated, from GEISA. Its content, will be described, as well. This work is ongoing, with the purpose of assessing the IASI measurements capabilities and the spectroscopic information quality, within the ISSWG (IASI Sounding Science Working Group), in the frame of the CNES (Centre National d'Etudes Spatiales, France)/EUMETSAT (EUropean organization for the exploitation of METeorological SATellites) Polar System (EPS) project, by simulating high resolution radiances and/or using experimental data. EUMETSAT will implement GEISA/IASI into the EPS ground segment. The IASI soundings spectroscopic data archive requirements will be discussed in the context of comparisons between recorded and calculated experimental spectra, using the ARA/4A forward line-by-line radiative transfer modelling code in its latest version.

Littoral Infrared Ship Self Defence Technology Studies (Autodefense cotiere infrarouge des navires etudes technologiques)

DTIC Science & Technology

2014-05-01

de simulation du Simulateur de Contre- mesures de la Menace Navale afin de pouvoir inclure des leurres et des autodirecteurs de missiles ; 4) Une...sur le littoral ; 2) La détection des petites cibles de surface sur le littoral ; 3) L’amélioration et la validation de la modélisation et du code...amélioration et une validation supplémentaire de la modélisation et du

Think-Tank: The Present and Future of University Adult Education Programs in Quebec. Proceedings = Journee d'etude: le present et l'avenior des programmes universitaires en andragogie au Quebec. Rapport (Montreal, Quebec, April 26, 1988).

ERIC Educational Resources Information Center

Simon, Pierre; Heft, Riva

These proceedings, presented in English and French, summarize a seminar on the present and future of adult education programs in Quebec. Six Quebec universities were represented. The conference was opened by Dr. Pierre Simon, who introduced the theme and rationale of the day-long workshop. Dr. Charles Bertrand welcomed the participants,…

Les sous-prefectures de Sikensi et Dabakala, Cote-d'Ivoire. (The Regions of Sikensi and Dabakala, Ivory Coast.) Method de preparation de la carte scolaire: etudes de cas 9.

ERIC Educational Resources Information Center

Hallak, J.; And Others

This volume contains the results of the first study of the problems associated with using educational television in curriculum planning in the Ivory Coast. The study was conducted in two districts of this African country, one relatively developed and situated in the southern part of the country, and the other more characteristic of the poorer…

Characterizing the Effects of Low Order Perturbations on Geodetic Satellite Precision Orbit Determination

DTIC Science & Technology

2015-08-07

Journal of Geodesy , Vol. 72, No. 6, 1998, pp. 333–342. [19] “Etalon-1, and -2,” http://ilrs.gsfc.nasa.gov/missions/satellite_missions...current_missions/g129_general.html, 2012. [24] L. Kanner and Associates, “Translation of ’Le satellite de geodesie ’Starlette’,’ Groupe de Recherches...de Geodesie Spatiale, Centre National d’Etudes Spatiales, Bretigny-sur-Orge, France, Report, 1974, 25 pp,” National Aeronautics and Space

Coupled Experimental and Theoretical Investigations of Instability, Chaos and Turbulence in an Axisymmetric Jet Flow

DTIC Science & Technology

1990-07-01

performed using two of the available methods, due respectively to Wolf et al. 8, and...FiueS1 270 Paper in progress to be submitted to: Phys. Fluids. ECOLE CENTRALE DES ARTS ET MANUFACTURES RAPPORT DE STAGE DE FIN D’ETUDES EXCITATION D’UN JET...disposition et de la souplesse dont ii a fait preuve. Je tiens dgalement & remercier tout particuliirement Patrick Reisenthel de toute 1’attention et

Polder in-flight results

NASA Astrophysics Data System (ADS)

Bermudo, F.; Lifermann, A.; Hagolle, O.; Laherrere, J.-M.; Bret-Dibat, T.

2018-04-01

This paper presents a global approach of POWER (Polarization and Directionalily of the Earths Reflectance) program: from instrument design . pre-flight and in-fligh1 calibrations till the first inflight results The POLDER sensor bas been developed by the Centre National d'Etudes Spatiales, the French space agency. It is part of the payload of the Advanced Earth Observation Satellite (ADEOS) developed by NASDA and launched m August 1996. POLDER had been acquiring data till the lost of ADEOS in June 1997.

Canadian Mathematics Education Study Group = Groupe Canadien d'Etude en Didactique des Mathematiques. Proceedings of the Annual Meeting (25th, Edmonton, Alberta, Canada, May 25-29, 2001).

ERIC Educational Resources Information Center

Simmt, Elaine, Ed.; Davis, Brent, Ed.

2001-01-01

This document contains the proceedings of the 2001 annual meeting of the Canadian Mathematics Education Study Group (CMESG) held at the University of Alberta, May 25-39, 2000. The proceedings consist of two plenary lectures, four working groups, five topic sessions, new Ph.D. reports, an AD Hoc Session, and panel discussions. Papers include: (1)…

STS-75 Flight Day 10

NASA Technical Reports Server (NTRS)

1996-01-01

On this tenth day of the STS-75 mission, the flight crew, Cmdr. Andrew Allen, Pilot Scott Horowitz, Payload Cmdr. Franklin Chang-Diaz, Payload Specialist Umberto Guidoni (Italy), and Missions Specialists Jeffrey Hoffman, Maurizio Cheli (ESA), and Claude Nicollier (ESA), are shown performing middeck and Microgravity lab experiments, including the Material pour l'Etude des Phenomenes Interessant la Solidification sur Terre et en Orbite (MEPHISTO) experiment, as well as some material burn tests. Earth views include cloud cover and horizon shots.

Etudes sociales 30. Sujet B: Interactions entre nations. Unite d'enseignement--Guide. Edition finale = Social Studies 30. Subject B: Interactions between Nations. Teaching Unit--Guide. Final Edition.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

In this Alberta (Canada) teacher's guide, four history units are outlined. These are: (1) Between Two Wars (1919-36); (2) World War II; (3) The Emergence and Interaction of the Superpowers; and (4) Contemporary World Interactions. At the end of each unit, questions are provided for discussion and there is a final synthesis at the end of the…

Optical Data Processing in Europe,

DTIC Science & Technology

1981-12-31

PROCESSING IN EUROPE4 _____________ 6PERFORMING ORG. REPORT NUMBER 7. AUTIKOR(eJ G . CONTRACT OR GRANT NUMBER(&) /7David/)Casasent 9. PERFORMING ORGANIZATION...Direction Des Recherches, Etudes et Techniques (DRET]). Present at this meeting were J. Graf, M. Petri and G . Marie of LEP as well as M. Constans and M...be useful in sonai , and processing studies. I visited Henri at Elf Aquitaine in Pau, Frarce. wt- w,-1. overall view of the company and a summary of

Le vocabulaire disponible du francais, Tome 1. Le vocabulaire concret usuel des enfants francais et acadiens: Etude temoin (The Working French Vocabulary, Volume 1. Common Generic Terms Used by French and Acadian Children: A Field Study).

ERIC Educational Resources Information Center

Mackey, William F.; And Others

The first of a two-volume study of the relative accessibility of French vocabulary in French-speaking Canada presents statistical data concerning the frequency, distribution, valence, and accessibility of vocabulary related to 16 fundamental centers of interest found in normal conversation. The scope, procedures, and results of the study are…

Les Interferences Semantiques Dans Les Oeuvres D'ahmadou Kourouma et De Mongo Beti: Essai D'etude Comparative [Semantic Interference in the Works of Ahmadou Kourouma and Mongo Beti: Test Comparative Study

ERIC Educational Resources Information Center

Tadoum, Jean Paul

2012-01-01

This dissertation focuses on the works of two well-known African Francophone novelists, Ahmadou Kourouma from the Ivory Coast and Mongo Beti from Cameroon. The objective of this study is to look at the influences of African oral traditions and analyze the literary transposition of semantic structures from African languages and cultures into the…

HBA1c: clinical and biological agreement for standardization of assay methods. Report by the experts of ALFEDIAM (Association de Langue Française pour lEtude du Diabète et des Maladies Métabolique) and SFBC (Société Française de Biologie Clinique).

PubMed

Gillery, P; Bordas-Fonfrède, M; Chapelle, J P; Drouin, P; Hue, G; Lévy-Marchal, C; Périer, C; Sélam, J L; Slama, G; Thivolet, C; Vialettes, B

1999-09-01

Glycohaemoglobin, and particularly haemoglobin A1c(HbA1c), assays have been used for many years to retrospectively evaluate the glycaemic control of diabetic patients. Cut-off values have been established for deciding treatment modifications. The techniques used in the laboratories however exhibit varying quality, and all of them are not yet standardized. The consequence is an under-utilization of this test, especially in non-hospital practice. In this context, working groups of Société Française de Biologie Clinique (SFBC), Association de Langue Française pour l'Etude du Diabète et des Maladies Métaboliques (ALFEDIAM) and Société Française d'Endocrinologie (SFE) have met together, in order to analyze the national status, and to propose practical recommendations for implementing a standardization process on the basis of international experiences. It is recommended to exclusively express results as HbA1c percentage, using methods standardized and certified by comparison to reference methods such as those using Diabetes Control and Complications Trial (DCCT) values. Simultaneously, contacts have been established with manufacturers, and the realisation of periodic quality control surveys was encouraged.

Etude numérique et expérimentale de l'evaporation d'une ou plusieurs gouttes de mélange de carburants dans un écoulement chauffé

NASA Astrophysics Data System (ADS)

Daïf, A.; Ali Chérif, A.; Bresson, J.; Sarh, B.

1995-10-01

The vaporization of one or two multi-component fuel droplets in hot air-stream is presented. A thermal wind tunnel with experimental channel has been designed to develop an experimental process. Firstly, the comparison between experimental results and numerical data is presented for the case of an isolated multi-component droplet. The numerical method is based on the resolution of heat and mass transfer equations between the droplet and the gas stream. This model includes the effect of Stephan flow, the effect of variable thermophysical properties of the components, and the non-unitary Lewis number in the gas film. The experimental results show the micro-explosion phenomenon observed in the liquid phase of multi-component droplet at low temperature. The experimental case of two pure or multi-component droplets in interaction is also presented. On présente un article de synthèse sur l'évaporation d'une ou deux gouttes de carburants à plusieurs composants dans un écoulement d'air chaud. Un dispositif expérimental constitué d'une soufflerie thermique, avec veine d'expérimentation, est réalisé pour permettre cette étude. Pour le cas d'une goutte isolée, une comparaison expérience-calcul est entreprise. Le principe de la méthode numerique consiste en la résolution des équations de transfert de masse et de chaleur entre la goutte et l'écoulement. Ce modèle prend en compte les effets de l'écoulement de Stephan, les variations des propriétés thermophysiques des composants dans les deux phases et la valeur du nombre de Lewis différente de l'unité dans le film de vapeur. Outre l'analyse plus approfondie qu'apporte la confrontation entre le calcul et l'expérience, les résultats expérimentaux montrent le phénomène de micro-explosion observé à l'intérieur de la goutte liquide. Le cas expérimental de deux gouttes en interaction est abordé qu'il s'agisse de gouttes de carburant pur ou de mélange.

Conception et validation d'un modele d'analyse et de suivi pour une politique energetique durable et acceptable de l'energie eolienne: Une etude comparative France-Quebec

NASA Astrophysics Data System (ADS)

Feurtey, Evariste

In this research, we built a conceptual model of a sustainable and acceptable wind power policy that we tried to validate through the case study of France and Quebec in the wind energy sector. Our qualitative and comparative approach helps us to illustrate the interaction of institutional variables studied, including the national context of emergence, the balance of power between pressure groups, the supranational and exogenous influences, level of political commitment, policy and regulatory instruments, social acceptance and energy policy mechanisms. The research confirms that the neo-corporatism is present in France as in Quebec. With the unfavorable energy context (low cost of electricity tariff, lack of electricity demand, and an already low zero carbon electric mix), it is an important factor explaining : 1) the 20 years delay accumulated by France and Quebec in the development of wind projects or industrial sector; 2) the 10% limited penetration scale given to wind energy. We also demonstrate that the political commitment to develop wind energy fluctuates with the government majority, the energy context or the influence of pressure groups. This manifests itself in a lack of continuity of policies and tariff instruments used. In both national case studies, the results also show that balanced policies and regulations ensure sustainable development of wind energy only if they allow a sufficient market size. The search results also illustrates that the conceptual division made between acceptance of wind sector, acceptance of ownership, local acceptance is very instructive. Social controversies, though multifactorial, are connected to both a critique of the development model too industrial and private, territorial dilemmas (closed environment), energy context (electric surplus in Quebec), or related to strategic planning system and centralized decision. An important issue for a more acceptable wind policy in the future will come to a greater plurality of ownership, variety of wind projects scale, diversity of financial support mechanisms. This transformation to a more territorial policy that require renewables also calls for decentralization and ecological modernization of institutions. Sustainable and acceptable energy policy requires obtaining a stabilized consensus on the long-term energy mix, which should be done by a comprehensive energy and public debate upstream the development of energy policy. Keywords: energy policy, social acceptance, wind energy, environmental assessment, components, interactions.

Management: Curse, Cure-All, or Workable Concept?

ERIC Educational Resources Information Center

Prentice, Marjorie

1973-01-01

In order for curriculum workers to plan and organize in an orderly, rational manner, an operating model is described which identifies the necessary components of the system and clearly states relationships between such components. (Author/CB)

A WDM/Optical-CDMA (WDM/O-CDMA) Concept for Avionics Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendez, A J; Hernandez, V J; Gagliardi, R M

2005-06-02

We describe a concept where WDM and O-CDMA share a set of discrete wavelengths and components while using similar modulation formats. O-CDMA acts as a channel multiplier. Experiments show the feasibility of >2X channel multiplication.

Against compassion: in defence of a "hybrid" concept of empathy.

PubMed

Morgan, Alastair

2017-07-01

In this article, I argue that the recent emphasis on compassion in healthcare practice lacks conceptual richness and clarity. In particular, I argue that it would be helpful to focus on a larger concept of empathy rather than compassion alone and that compassion should be thought of as a component of this larger concept of empathy. The first part of the article outlines a critique of the current discourse of compassion on three grounds. This discourse naturalizes, individualizes, and reifies compassion leading to a decontextualized and simplified understanding of failures in healthcare practice. The second part uses resources from phenomenology and contemporary moral philosophy to construct a "hybrid" concept of empathy that includes both pre-reflective/intuitive and cognitive/imaginative components. This "hybrid" concept of empathy leads to a more complex understanding of the multiple responses to others' distress. I conclude that there are no straightforward normative naturalistic responses to others' distress. Rather than conceptualizing compassion as a naturalistic impulse or a character-based trait, we need to consider the complexity of our empathic recognition of vulnerable others. © 2016 John Wiley & Sons Ltd.

Study of selective heating at ion cyclotron resonance for the plasma separation process

NASA Astrophysics Data System (ADS)

Compant La Fontaine, A.; Pashkovsky, V. G.

1995-12-01

The plasma separation process by ion cyclotron resonance heating (ICRH) is studied both theoretically and experimentally on two devices: the first one called ERIC (Ion Cyclotron Resonance Experiment) at Saclay (France) [P. Louvet, Proceedings of the 2nd Workshop on Separation Phenomena in Liquids and Gases, Versailles, France, 1989, edited by P. Louvet, P. Noe, and Soubbaramayer (Centre d'Etudes Nucléaires de Saclay and Cité Scientifique Parcs et Technopoles, Ile de France Sud, France, 1989), Vol. 1, p. 5] and the other one named SIRENA at the Kurchatov Institute, Moscow, Russia [A. I. Karchevskii et al., Plasma Phys. Rep. 19, 214 (1993)]. The radio frequency (RF) transversal magnetic field is measured by a magnetic probe both in plasma and vacuum and its Fourier spectrum versus the axial wave number kz is obtained. These results are in agreement with the electromagnetic (EM) field calculation model based on resolution of Maxwell equations by a time-harmonic scheme studied here. Various axial boundary conditions models used to compute the EM field are considered. The RF magnetic field is weakly influenced by the plasma while the electric field components are strongly disturbed due to space-charge effects. In the plasma the transversal electric field is enhanced and the kz spectrum is narrower than in vacuum. The calculation of the resonant isotope heating is made by the Runge-Kutta method. The influence of ion-ion collisions, inhomogeneity of the static magnetic field B0, and the RF transversal magnetic field component on the ion acceleration is examined. These results are successfully compared with experiments of a minor isotope 44Ca heating measurements, made with an energy analyzer.

Ancestry analysis reveals a predominant Native American component with moderate European admixture in Bolivians.

PubMed

Heinz, Tanja; Alvarez-Iglesias, Vanesa; Pardo-Seco, Jacobo; Taboada-Echalar, Patricia; Gómez-Carballa, Alberto; Torres-Balanza, Antonio; Rocabado, Omar; Carracedo, Angel; Vullo, Carlos; Salas, Antonio

2013-09-01

We have genotyped 46 Ancestry Informative Markers (AIMs) in two of the most populated areas in Bolivia, namely, La Paz (Andean region; n=105), and Chuquisaca (Sub-Andean region; n=73). Using different analytical tools, we inferred admixture proportions of these two American communities by comparing the genetic profiles with those publicly available from the CEPH (Centre d'Etude du Polymorphisme Humain) panel representing three main continental groups (Africa, Europe, and America). By way of simulations, we first evaluated the minimum sample size needed in order to obtain accurate estimates of ancestry proportions. The results indicated that sample sizes above 30 individuals could be large enough to estimate main continental ancestry proportions using the 46 AIMs panel. With the exception of a few individuals, the results also indicated that Bolivians showed a predominantly Native American ancestry with variable levels of European admixture. The proportions of ancestry were statistically different in La Paz and Chuquisaca: the Native American component was 86% and 77% (Mann-Whitney U-test: un-adjusted P-value=2.1×10(-5)), while the European ancestry was 13% and 21% (Mann-Whitney U-test: un-adjusted P-value=3.6×10(-5)), respectively. The African ancestry in Bolivians captured by the AIMs analyzed in the present study was below 2%. The inferred ancestry of Bolivians fits well with previous studies undertaken on haplotype data, indicating a major proportion of Native American lineages. The genetic differences observed in these two groups suggest that forensic genetic analysis should be better performed based on local databases built in the main Bolivian areas. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Lay Worker Health Literacy: A Concept Analysis and Operational Definition.

PubMed

Cadman, Kathleen Paco

2017-10-01

The concept of lay worker health literacy is created by concurrently analyzing and synthesizing two intersecting concepts, lay workers and health literacy. Articulation of this unique intersection is the result of implementing a simplified Wilson's Concept Analysis Procedure. This process incorporates the following components: a) selecting a concept, b) determining the aims/purposes of analysis, c) identifying all uses of the concept, d) determining defining attributes, e) identifying a model case, f) identifying borderline, related, contrary, and illegitimate cases, g) identifying antecedents and consequences, and h) defining empirical referents. Furthermore, as current literature provides no operational definition for lay worker health literacy, one is created to contribute cohesion to the concept. © 2017 Wiley Periodicals, Inc.

Is there a duty for private employers to provide emergency mental health care services?

PubMed

Langlieb, Tammara F; Langlieb, Alan M; Everly, George S

2006-01-01

This article presents a discussion of whether employers in private companies have a duty to provide an emergency action plan with a mental health component for its employees. It discusses basic negligence concepts and focuses mainly on the "duty of care" component of negligence. It then applies the negligence concepts to private employers and discusses how private companies arguably might have a duty under the laws of negligence to provide employees with an emergency action plan, specifically a plan including mental health provisions.

Concepts for the design of an antimatter annihilation rocket

NASA Technical Reports Server (NTRS)

Morgan, D. L., Jr.

1982-01-01

Matter-antimatter annihilation is considered for spacecraft propulsion. Annihilation produces considerably more energy per unit mass of propellant than any other known means of energy production. An antimatter annihilation rocket requires several systems and components that are unique to its nature. Among these are an antimatter storage system, a means to extract the antimatter from storage, a system to transport the antimatter to the rocket engine, and the engine wherein annihilation occurs and thrust is produced. Design concepts of these systems and components are presented and discussed.

IRT-Stimulus Contingencies in Chained Schedules: Implications for the Concept of Conditioned Reinforcement

ERIC Educational Resources Information Center

Bejarano, Rafael; Hackenberg, Timothy D.

2007-01-01

Two experiments with pigeons investigated the effects of contingencies between interresponse times (IRTs) and the transitions between the components of 2- and 4-component chained schedules (Experiments 1 and 2, respectively). The probability of component transitions varied directly with the most recent (Lag 0) IRT in some experimental conditions…

Ceramic Matrix Composites for Rotorcraft Engines

NASA Technical Reports Server (NTRS)

Halbig, Michael C.

2011-01-01

Ceramic matrix composite (CMC) components are being developed for turbine engine applications. Compared to metallic components, the CMC components offer benefits of higher temperature capability and less cooling requirements which correlates to improved efficiency and reduced emissions. This presentation discusses a technology develop effort for overcoming challenges in fabricating a CMC vane for the high pressure turbine. The areas of technology development include small component fabrication, ceramic joining and integration, material and component testing and characterization, and design and analysis of concept components.

Competition entre supraconductivite et magnetisme au voisinage de la transition de Mott dans le conducteur organique quasi-bidimensionnel k-(BEDT-TTF)2copper[N(CN)2]bromine

NASA Astrophysics Data System (ADS)

Fournier, David

Les conducteurs organiques quasi-bidimensionnels kappa-ET2X presentent d'importantes similitudes avec les SCHT telles qu'une phase isolant de Mott, un regime de pseudogap et un etat supraconducteur. L'etude de leurs proprietes apparait donc complementaire. Parmi les interrogations persistantes concernant la physique de ces systemes, l'origine du (ou des) processus exotique d'appariement, responsable de la supraconductivite est le sujet suscitant l'interet le plus marque dans la communaute. L'hypothese d'un mecanisme lie a la proximite d'un etat antiferromagnetique est privilegiee. Une etape importante dans la resolution de cette problematique est l'identification de la symetrie du parametre d'ordre. D'apres de nombreux travaux sur les systemes fortement correles, la sonde ultrasonore, de par sa sensibilite aux excitations de quasiparticule a basse temperature, est consideree comme particulierement adaptee a l'etude de cette propriete. Cependant, son emploi necessite l'utilisation d'un compose metallique a basse temperature et completement supraconducteur. Le compose metallique organique kappa-ET 2Cu[N(CN)2]Br presente toutes les caracteristiques necessaires a l'etude de cette propriete. En effet, il est situe loin de la transition du premier ordre de Mott et est completement supraconducteur. De facon surprenante, ce systeme semble se coupler fortement avec le reseau ce qui augmente significativement la sensibilite de cette sonde aux proprietes du gaz electronique. Cependant, des difficultes techniques importantes, liees a la nature intrinseque de ce materiau, doivent etre surmontees pour proceder a des mesures suivant differentes polarisations. La presente etude a profondement modifie notre comprehension de ce systeme. En effet, ces mesures ont permis de constater que le kappa-ET2Cu[N(CN)2]Br est un compose qui est situe en bordure de la zone de coexistence entre la supraconductivite et le magnetisme, ce qui constitue un resultat totalement inattendu. De plus, la variation judicieuse du cycle thermique s'est averee etre equivalente a une modification de la pression chimique. Cette derniere est modifiee par l'intermediaire d'une relaxation structurale autour de 85 K appelee la transition de verre d'ethylenes. Cela nous a permis de suivre l'evolution de cette coexistence en s'approchant de la transition de premier ordre, et ainsi de statuer sur la competition entre la supraconductivite et le magnetisme ainsi que sur l'existence d'une separation de phase d'ordre macroscopique. De plus, nous avons observe une anisotropie similaire sur les mesures de vitesse ultrasonore entre le regime de pseudogap et la supraconductivite. Ce resultat tend a confirmer l'existence d'une physique commune entre le regime de pseudogap et l'etat supraconducteur. Le regime de pseudogap, encore meconnu a ce jour, est probablement relie a des fluctuations antiferromagnetiques, dont l'origine pourrait etre un emboitement de la surface de Fermi quasi-unidimensionnelle de ce compose, ou bien relie a la proximite de la physique de Mott. Enfin, l'analyse de la symetrie du parametre d'ordre supraconducteur, qui est probablement de type s+d, tend a demontrer que les processus de couplage interplan sont d'une importance cruciale. L'approche theorique de Hubbard purement 2D dans le plan conducteur semble donc insuffisante pour la recherche du mecanisme d'appariement.

A figure-of-merit approach to extraterrestrial resource utilization

NASA Technical Reports Server (NTRS)

Ramohalli, K.; Kirsch, T.

1990-01-01

A concept is developed for interrelated optimizations in space missions that utilize extraterrestrial resources. It is shown that isolated (component) optimizations may not result in the best mission. It is shown that substantial benefits can be had through less than the best propellants, propellant combinations, propulsion hardware, and actually, some waste in the traditional sense. One ready example is the possibility of discarding hydrogen produced extraterrestrially by water splitting and using only the oxygen to burn storable fuels. The gains in refrigeration and leak-proof equipment mass (elimination) outweigh the loss in specific impulse. After a brief discussion of this concept, the synthesis of the four major components of any future space mission is developed. The four components are: orbital mechanics of the transportation; performance of the rocket motor; support systems that include power; thermal and process controls, and instruments; and in situ resource utilization plant equipment. This paper's main aim is to develop the concept of a figure-of-merit for the mission. The Mars Sample Return Mission is used to illustrate the new concept. At this time, a popular spreadsheet is used to quantitatively indicate the interdependent nature of the mission optimization. Future prospects are outlined that promise great economy through extraterrestrial resource utilization and a technique for quickly evaluating the same.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huff, Kathryn D.

Component level and system level abstraction of detailed computational geologic repository models have resulted in four rapid computational models of hydrologic radionuclide transport at varying levels of detail. Those models are described, as is their implementation in Cyder, a software library of interchangeable radionuclide transport models appropriate for representing natural and engineered barrier components of generic geology repository concepts. A proof of principle demonstration was also conducted in which these models were used to represent the natural and engineered barrier components of a repository concept in a reducing, homogenous, generic geology. This base case demonstrates integration of the Cyder openmore » source library with the Cyclus computational fuel cycle systems analysis platform to facilitate calculation of repository performance metrics with respect to fuel cycle choices. (authors)« less

"If You Seek Justice, Put a Gift on the Scale": Concepts of Justice in White Ethnic American Literature.

ERIC Educational Resources Information Center

Chapin, Helen Geracimos

This paper analyzes non-Anglo views of the concept of justice; these views are different from those of the dominant Anglo-American tradition and therefore make up one of the components of ethnicity. The author examines justice as a concept in the literature of three contemporary American authors, the Italian American Pietro Di Donato, Nelson…

Preliminary design of an auxiliary power unit for the space shuttle. Volume 3: Details of system analysis, engineering, and design for selected system

NASA Technical Reports Server (NTRS)

Hamilton, M. L.; Burriss, W. L.

1972-01-01

Numerous candidate APU concepts, each meeting the space shuttle APU problem statement are considered. Evaluation of these concepts indicates that the optimum concept is a hydrogen-oxygen APU incorporating a recuperator to utilize the exhaust energy and using the cycle hydrogen flow as a means of cooling the component heat loads.

Concepts in Environmental Education.

ERIC Educational Resources Information Center

Hopkins, Sally

Presented is a discussion of the components and concepts of an ecology typical of the coastal southeastern United States. Principles presented are applicable to other areas. The discussion includes several major sections: the environment, wildlife management, freshwater ecosystems, and the estuarine environment. Numerous figures and illustrations…

Assessing factorial invariance of two-way rating designs using three-way methods

PubMed Central

Kroonenberg, Pieter M.

2015-01-01

Assessing the factorial invariance of two-way rating designs such as ratings of concepts on several scales by different groups can be carried out with three-way models such as the Parafac and Tucker models. By their definitions these models are double-metric factorially invariant. The differences between these models lie in their handling of the links between the concept and scale spaces. These links may consist of unrestricted linking (Tucker2 model), invariant component covariances but variable variances per group and per component (Parafac model), zero covariances and variances different per group but not per component (Replicated Tucker3 model) and strict invariance (Component analysis on the average matrix). This hierarchy of invariant models, and the procedures by which to evaluate the models against each other, is illustrated in some detail with an international data set from attachment theory. PMID:25620936

General aviation crash safety program at Langley Research Center

NASA Technical Reports Server (NTRS)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

A topological multilayer model of the human body.

PubMed

Barbeito, Antonio; Painho, Marco; Cabral, Pedro; O'Neill, João

2015-11-04

Geographical information systems deal with spatial databases in which topological models are described with alphanumeric information. Its graphical interfaces implement the multilayer concept and provide powerful interaction tools. In this study, we apply these concepts to the human body creating a representation that would allow an interactive, precise, and detailed anatomical study. A vector surface component of the human body is built using a three-dimensional (3-D) reconstruction methodology. This multilayer concept is implemented by associating raster components with the corresponding vector surfaces, which include neighbourhood topology enabling spatial analysis. A root mean square error of 0.18 mm validated the three-dimensional reconstruction technique of internal anatomical structures. The expansion of the identification and the development of a neighbourhood analysis function are the new tools provided in this model.

Instrumental concept and preliminary performances of SIFTI: static infrared fourier transform interferometer

NASA Astrophysics Data System (ADS)

Hébert, Philippe-Jean; Cansot, E.; Pierangelo, C.; Buil, C.; Bernard, F.; Loesel, J.; Trémas, T.; Perrin, L.; Courau, E.; Casteras, C.; Maussang, I.; Simeoni, D.

2017-11-01

The SIFTI (Static Infrared Fourier Transform Interferometer) instrument aims at supporting an important part in a mission for atmospheric pollution sounding from space, by providing high spectral resolution and high Signal to Noise Ratio spectra of the atmosphere. They will allow to resolve tropospheric profiles of ozone (03) and carbon monoxide (C0), especially down to the planetary boundary layer (PBL), an altitude region of very high interest, though poorly monitored to date, for air quality and pollution monitoring. The retrieved profile of ozone, resp. C0, will contain 5 to 7, resp. 2.5 to 4, independent pieces of information. The French space agency CNES (Centre National d'Etudes Spatiales) has proposed and is studying an instrument concept for SIFTI based on a static interferometer, where the needed optical path are generated by a pair of crossed staircase fixed mirrors (replacing the moving reflector of dynamic Fourier transform interferometers like IASI or MIPAS). With the SIFTI design, a very high spectral resolution ( 0.1 cm-1 apodised) is achieved in a very compact optical setup, allowing a large throughput, hence a high SNR. The measurements are performed in the 9.5 μm band for 03 and in the 4.6 μm band for C0. The science return of the sounder can be further increased if an "intelligent pointing" process is implemented. This consists in combining the TIR sounder with a companion TIR imager, providing information on the cloud coverage in the next observed scene. 0nboard, real-time analysis of the IR image is used to command the sounder staring mirror to cloud free areas, which will maximize the probability for probing down to the surface. After the first part of the phase A, the architecture of SIFTI was studied as a trade-off between performance and resource budget. We review the main architecture and functional choices, and their advantages. The preliminary instrument concept is then presented in its main aspects and in terms of main subsystem functions. The preliminary budgets of mass, volume, size and power are also evaluated. Eventually the science performances are estimated, at instrument level and at mission level, and are compared to the specifications. To finish, the ways forward are discussed.

Intelligence Effectiveness in the European Union (E.U.) in the New Security Environment

DTIC Science & Technology

2012-12-01

works. When it comes to compliance with E.U. laws, Gerda Faulkner, an Austrian scholar identifies three worlds of compliance: “a world of law...www.europarl.europa.eu/RegData/etudes/note/libe/2011/462420/IPOL- LIBE_NT(2011)462420(PAR00)_EN.pdf. 79 Gerda Falkner, Oliver Treib, Miriam Hartlapp, and Simone...http://belfercenter.ksg.harvard.edu/files/Fagersten%20theoretical%20framework.p df. Falkner, Gerda . Treib, Oliver. Hartlapp, Miriam and Leiber

Correlation of Survival Rates of Anopheles dirus A (Diptera: Culicidae) with Different Infection Densities of Plasmodium cynomolgi

DTIC Science & Technology

1986-01-01

rhesus, le premier indemne, le second infeste par Plasmodium cynomolgi. Vingt moustiques gorges de sang constituaient le groupe temoin non infest& et...60 autres moustiques infest& ont ete divises en trois groupes de 20 moustiques (groupes infest& 1, 2 et 3). On a evaI& le nombre moyen d’oocystes...port& par les moustiques en dissequant ceux du groupe 1 au septieme jour de I’etude; on a recherche la presence de sporozo’ites dans les glandes

International overview of hospital procurement.

PubMed

Ferrier, Maud; Lariviere, David; Laurent, Claire; Roque, Eric

2011-01-01

This article was written by four French hospital director students at the Ecole des Hautes Etudes en Santé Publique (EHESP-School of Public Health) from a study conducted jointly with students at the Grenoble School of Management to present an international overview of hospital procurement methods in ten countries. An analysis of these methods showed that there was a general trend towards group purchasing, with some common aims in terms of costs and performance and some differences in legislation (competition), size of the public sector and centralization or decentralization.

Proceedings of the 2004 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2004 du Groupe Canadien d'Etude en Didactique des Mathematiques (28th, Quebec City, Quebec, Canada, May 28-Jun 1, 2004)

ERIC Educational Resources Information Center

Simmt, Elaine, Ed.; Davis, Brent, Ed.

2005-01-01

This submission contains the Proceedings of the 2004 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at Universite Laval in Quebec City, Quebec. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of the Study…

Role of Al2O3 in Sintering of Submicron Yttria-Stabilized ZrO2 Powders.

DTIC Science & Technology

1983-12-02

and dispersed by milling in a 60 : 40 alcohol : water solution, followed by pressing at 205 MPa. Significantly increased densification was obtained...the range 1100-1350-C, was investigated. The Al󈧘 was added as hydrated A1(OH)l and dispersed by milling in a 60 : 40 alcohol : water solution...124-130 (1975). 24. M. Heughebaert-Therasse, "Contribution a L’etude de L’evolution et du Frittage de la Zircone Stabilisee par Differents Oxydes , a

STS-93 Tognini and Hawley pose with the SWUIS on the middeck of Columbia

NASA Image and Video Library

2013-11-18

STS093-347-027 (23-27 July 1999) --- Astronauts Steven A. Hawley (left) and Michel Tognini, mission specialists, are pictured with the Southwest Ultraviolet Imaging System (SWUIS) on the middeck of the Space Shuttle Columbia. SWUIS was used during the mission to image planets and other solar system bodies in order to explore their atmospheres and surfaces in ultraviolet (UV) region of the spectrum, which astronomers value for diagnostic work. Tognini represents the Centre National d'Etudes Spatiales (CNES) of France.

Proceedings of the 2007 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2007 du Groupe Canadien d'Etude en Didactique des Mathematiques (31st, Fredricton, New Brunswick, Canada, Jun 8-12, 2007)

ERIC Educational Resources Information Center

Liljedahl, Peter, Ed.

2008-01-01

This submission contains the Proceedings of the 2007 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at the University of New Brunswick in Fredricton, New Brunswick. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning.…

Proceedings of the 2009 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2009 du Groupe Canadien d'Etude en Didactique des Mathematiques (33rd, Toronto, Ontario, Canada, June 5-June 9, 2009)

ERIC Educational Resources Information Center

Liljedahl, Peter, Ed.; Oesterle, Susan, Ed.; Abu-Bakare, Veda, Ed.

2010-01-01

This submission contains the Proceedings of the 2009 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at York University in Toronto, Ontario. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of the Study Group…

Proceedings of the 2010 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2010 du Groupe Canadien d'Etude en Didactique des Mathematiques (34th, Burnaby, British Columbia, Canada, May 21-25, 2010)

ERIC Educational Resources Information Center

Liljedahl, Peter, Ed.; Oesterle, Susan, Ed.; Allan, Darien, Ed.

2011-01-01

This submission contains the Proceedings of the 2010 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at Simon Fraser University in Burnaby, British Columbia. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims…

T2L2 on JASON-2: First Evaluation of the Flying Model

DTIC Science & Technology

2007-01-01

Para, J.-M. Torre R&D Metrology CNRS/GEMINI Observatoire de la Côte d’Azur Caussol, France E-mail: philippe.guillemot@cnes.fr Abstract...Laser Link” experiment T2L2 [1], under development at OCA (Observatoire de la Côte d’Azur) and CNES (Centre National d’Etudes Spatiales), France, will be...Experimental Astronomy, 7, 191-207. [2] P. Fridelance and C. Veillet, 1995, “Operation and data analysis in the LASSO experiment,” Metrologia

Etude par spectrométrie infrarouge et Raman de la pyrimidone-2 et de son chlorhydrate (chlorure d'oxo-2 pyrimidinium)

NASA Astrophysics Data System (ADS)

Picquenard, Eric; Lautié, Alain

The i.r. and Raman spectra of crystalline 2-pyrimidone, its hydrochloride and corresponding N-deuterated derivatives have been investigated between 4000 and 200 cm -. Aqueous solutions were also examined. An assignment for all intramolecular fundamentals is given. Effects of the protonation on the C=O group and on the ring are discussed as well as strength and characteristics of the hydrogen bonds NH … O and NH … Cl -.

Proceedings of the 2002 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2002 du Groupe Canadien d'Etude en Didactique des Mathematiques (26th, Kingston, Ontario, Canada, May 24-28, 2002)

ERIC Educational Resources Information Center

Simmt, Elaine, Ed.; Davis, Brent, Ed.

2003-01-01

This submission contains the Proceedings of the 2002 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at Queen's University in Kingston, Ontario. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of the Study…

Non-Lethal Weapons Effectiveness Assessment Development and Verification Study (Etude d’evaluation, de developpement et de verification de l’efficacite des armes non letales)

DTIC Science & Technology

2009-10-01

will guarantee a solid base for the future. The content of this publication has been reproduced directly from material supplied by RTO or the...intensity threat involving a local population wanting to break into the camp to steal material and food supplies ; and • A higher intensity threat...combatant evacuation opeations, distribute emergency supplies , and evacuate/ relocate refugees and displaced persons. Specified NLW-relevant tasks are

Proceedings of the 2005 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2005 du Groupe Canadien d'Etude en Didactique des Mathematiques (29th, Ottawa, Ontario, Canada, May 27-31, 2005)

ERIC Educational Resources Information Center

Liljedahl, Peter, Ed.

2006-01-01

This submission contains the Proceedings of the 2005 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at the University of Ottawa in Ottawa, Ontario. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of the…

Proceedings of the 2008 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2008 du Groupe Canadien d'Etude en Didactique des Mathematiques (32nd, Sherbrooke, Quebec, Canada, May 23-27, 2008)

ERIC Educational Resources Information Center

Liljedahl, Peter, Ed.; Oesterle, Susan, Ed.; Berneche, Christian, Ed.

2009-01-01

This submission contains the Proceedings of the 2008 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at the Universite de Sherbrooke in Sherbrooke, Quebec. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of…

NASA Cryogenic Propellant Systems Technology Development and Potential Opportunities for Discussion

NASA Technical Reports Server (NTRS)

Meyer, Michael L.

2015-01-01

Members of the eCryo Team are traveling to France to meet with CNES (Centre National d'Etudes Spatiales) on the benchmarking of CFM (Cryogenic Fluids Management) analytical models the week of January 26th, 2015. Mike Meyer is representing the Agency and eCryo Project and will conduct a conversation to explore future work. This slide package (28 charts and 3 movies) requires approval via a 1676. ISS data in this chart set has been copied from public websites.

L'Education et l'information juridiques dans un contexte bilingue. Etude exploratrice sur la comprehension populaire des lois (Legal Education and Information in a Bilingual Context. Exploratory Study on the Popular Understanding of Laws).

ERIC Educational Resources Information Center

Ribordy, Francois-Xavier; And Others

A study investigated the readability of current laws for Canadian francophones and anglophones. The 63 subjects were asked to read a variety of brief legal texts available in parallel styles in both languages and to answer questions about the texts' content. Subjects were also surveyed about their preference for a formal or vulgarized style of…

Etude Comparative des Systemes de Reperage de l'Information Bibliographique en Mode Dialogue. Rapports de Recherche, No. 13 (Comparative Study of Systems for the Online Retrieval of Bibliographic Information. Research Report No. 13).

ERIC Educational Resources Information Center

Perusse, Lyse

This study, which was conducted at the University of Quebec over a period of six months, focuses on four systems for online information retrieval that are available to users at the university and provide access to some of the same databases: BRS (Bibliographic Retrieval Services Inc.), CAN/OLE (Canadian On-Line Inquiry), Lockheed DIALOG, and…

Pressure Suppresses Serotonin Release by Guinea Pig Striatal Synaptosomes

DTIC Science & Technology

1988-01-01

neurological syndrome. Brit J Pharmacol 1982; 76:447-452. 5. Wardley-Smith B, Meldrum BS. Effect of excitatory amino acid antagonists on !he high pressure...Res 1974; 1:,-28. *14. IBichard AR, Little HIJ. Drugs that increase Y-aminobutyric acid tr.ansmission prm ict PF..atnst * I the high pressure...Effects of high pressure of heliox on the striatal 5-HIAA and ascorbic acid rates in the rat. Cent Etud Rech Bio-Physiol Rep 84-08. 1984:35. 7

Some Implications of Linguistic Theory for Applied Linguistics. Collection d'"Etudes linguistiques," No. 19. Papers from the Neuchatel Colloquium in Applied Linguistics in collaboration with AIMAV, AILA, CILA, and the University of Neuchatel (3rd, May 30-June 1, 1974).

ERIC Educational Resources Information Center

Corder, S. P., Ed.; Roulet, E., Ed.

Papers that address implications of linguistic theory for applied linguistics are presented. In "Some Semantic Properties of Some Conjunctions," W. Abraham is concerned with the function of "but" and its translation equivalents in German and other languages. In "Is It Possible and Necessary to Write Text Grammars?," T. P. Krzeszowski examines the…

Proceedings of the 2015 Annual Meeting of the Canadian Mathematics Education Study Group = Actes De La Rencontre Annuelle 2015 Du Groupe Canadien D'etude en Didactique Des Mathematiques (39th, Moncton, New Brunswick, Canada, June 5-9, 2015)

ERIC Educational Resources Information Center

Oesterle, Susan, Ed.; Allan, Darien, Ed.

2015-01-01

This submission contains the Proceedings of the 2015 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at the Université de Moncton in Moncton, New Brunswick. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of…

Proceedings of the 2003 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2003 du Groupe Canadien d'Etude en Didactique des Mathematiques (27th, Wolfville, Nova Scotia, Canada, May 30-June 3, 2003)

ERIC Educational Resources Information Center

Simmt, Elaine, Ed.; Davis, Brent, Ed.

2004-01-01

This submission contains the Proceedings of the 2003 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at Acadia University in Wolfville, Nova Scotia. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of the…

Advances in Guidance and Control Systems.

DTIC Science & Technology

1983-01-01

contrble optimal. de techniques de synth~se et de m~thodes conceptuelles ont 616 r~alis~s depuis le dernier symposium consacri A ce domaine en 1973. L ...PILOTAGE DES AlIONS A GRAMD MAflONWnABILITS par Oiner L .* MERCIER Office National d’Etudes et de Recherches A~rospatiales (OaRA) 92320 Chitillon...par le fait que, dons le domaine de manauvre envisag;6, le mod~le dynamique eat fortement nonliniaire, variable l ~e long du domaine de vol, et sujet i

The Training of Modern Language Teachers in Various Countries. Collection d'"Etudes linguistiques," No. 20. Selected papers from the Association Internationale pour la Recherche et la Diffusion des Methodes Audio-Visuelles et Structuro-Globales Seminar (5th, August 27-September 1, 1973).

ERIC Educational Resources Information Center

Nivette, Jos, Ed.

Selected papers that address theoretical and practical training of the modern language teacher and language teaching experiments in various countries are presented. Some of the articles included are the following: "Les problemes de la formation linguistique et pedagogique des professeurs de francais en Afrique Subsaharienne" (The…

Survey of Hyperspectral and Multispectral Imaging Technologies (Etude sur les technologies d’imagerie hyperspectrale et multispectrale)

DTIC Science & Technology

2007-05-01

but relatively low acoustic figure of merit (the ability to couple acoustic wave to the crystal). In the infrared region TeO2 crystal (0.35 – 5.0 µm...filter. More in particular, it is based on a Lyot filter, which is a sandwich of birefringent liquid crystal, glass , quartz placed between two...variable retardance element in the sandwich composed of quartz, glass , polarizers and liquid crystal itself. To achieve the desired wavelength

Rotary-Balance Testing for Aircraft Dynamics (Les Essais sur Balance Rotative pour l’Etude de la Dynamique du Vol de l’Avion)

DTIC Science & Technology

1990-01-01

critical examination of the rotary-balance techniques used in the AGARD community for the analysis of high-angle-of-attack dynamic behavior of aircraft. It...aircraft. It was felt that sudi a critical examination should encompass both the experimental techniques used to obtain rotary-flow aerodynamic data and the...monitor the vibrational and critical structural characteristies of the apparatus and tunnel support system. Many of these systems are integrated directly

Proceedings of the 2006 Annual Meeting of the Canadian Mathematics Education Study Group = Actes de la Rencontre Annuelle 2006 du Groupe Canadien d'Etude en Didactique des Mathematiques (30th, Calgary, Alberta, Canada, Jun 3-7, 2006)

ERIC Educational Resources Information Center

Liljedahl, Peter, Ed.

2007-01-01

This submission contains the Proceedings of the 2006 Annual Meeting of the Canadian Mathematics Education Study Group (CMESG), held at the University of Calgary in Calgary, Alberta. The CMESG is a group of mathematicians and mathematics educators who meet annually to discuss mathematics education issues at all levels of learning. The aims of the…

Airframe/Propulsion Interference

DTIC Science & Technology

1975-03-01

elancee, en incidence, est prcsenic figure 14. L’intrados se caracterise par une divergence des lignes dc courant, et par une reducti.in ’es nombres...ale de la zone dissipative en R et A/S une fonction du nombre de Hach au recollement Mq et d’un parametre de forme Hiq caracterisant le...extralte d’une Etude expE- rimentale prEsentEe rEf. [13]. Bile se caractErise par un elancement assez important et un rapport de tronoature ft^ /\\M.t

Environmental Conditions of Surface Soils and Biomass Prevailing in the Training Area at CFB Gagetown, New Brunswick

DTIC Science & Technology

2003-09-26

sur Ia caracterisation environnementale de leurs secteurs d’entrainement majeurs afin d’ameliorer les connaissances des impacts de tous les types...et geographique. En 2001, Ia premiere phase de cette etude a consiste en la caracterisation hydrogeologique partielle dans la portion nord du...secteur d’entrainement. Cette premiere phase a implique le forage de 42 puits, afin de caracteriser la dynamique et la qualite des eaux souterraines. En

Experiences of CNES and SEP on space mechanisms rotating at low speed

NASA Technical Reports Server (NTRS)

Atlas, G.; Thomin, G.

1987-01-01

Some aspects of knowledge acquired in the field of space mechanisms by Societe Europeenne de Propulsion and Centre National d'Etudes Spatiales in International and French National space programs are described. The experience described centers on the development of these programs: The MEGS (Mechanisme d'Etrainement du Generateur Solaire), and the MOGS (Mechanisme d'Orientation de Generateur Solaire), both solar array drive mechanisms. Key design areas and the mechanism performance obtained are highlighted. Some test problems with the MEGS sliprings are discussed.

L'etude de l'apprentissage du vocabulaire en contexte par l'ecoute d'un dialogue scenarise en francais langue seconde (The Study of Vocabulary Learning in Context by Listening to a Dialogue in Scenario Form in French as a Second Language).

ERIC Educational Resources Information Center

Duquette, Lise

A study investigated the relative effectiveness of French second language vocabulary learning when presented in two contexts: video, with attention to extralinguistic factors, or audio, with focus on linguistic factors alone. Four student groups (n=137 university students) were formed from existing classes: experimental with video treatment;…

sts093-s-016

NASA Image and Video Library

1999-07-27

STS093-(S)-016 (27 July 1999) --- Members of the STS-93 crew pose in front of the Space Shuttle Columbia following the night landing on runway 33 at Kennedy Space Center's Shuttle Landing Facility. From the left are astronauts Catherine G. (Cady) Coleman and Steven A. Hawley, both mission specialists; Jeffrey S. Ashby, pilot; Eileen M. Collins, mission commander; and Michel Tognini, mission specialist representing France's Centre National d'Etudes Spatiales (CNES). Main gear touchdown occurred at 11:20:35 p.m.(EDT), July 27, 1999.

Pluriannual variability of sedimentation on mudflats in a macrotidal estuary

NASA Astrophysics Data System (ADS)

Cuvilliez, A.; Lafite, R.; Deloffre, J.; Massei, N.; Langlois, E.; Sakho, I.

2010-12-01

Antoine Cuvilliez1, Robert Lafite2, Julien Deloffre2, Nicolas Massei2, Estelle Langlois 3 and Issa Sakho2 1 Université du Havre, FRE 3102, Laboratoire d’ondes et milieux complexes, Université du Havre, 76058 Le Havre cedex, France 2 Université de Rouen, UMR 6143, Morphodynamique Continentale et Côtière, 76821 Mont Saint Aignan Cedex, France. 3 Université de Rouen, ECODIV , Etude et Compréhension de la Biodiversité, 76821 Mont Saint Aignan Cedex, France.

Overview of NASA GRC Electrified Aircraft Propulsion Systems Analysis Methods

NASA Technical Reports Server (NTRS)

Schnulo, Sydney

2017-01-01

The accurate modeling and analysis of electrified aircraft propulsion concepts require intricate subsystem system component coupling. The major challenge in electrified aircraft propulsion concept modeling lies in understanding how the subsystems "talk" to each other and the dependencies they have on one another.

Academic Motivation: Concepts, Strategies, and Counseling Approaches

ERIC Educational Resources Information Center

Rowell, Lonnie; Hong, Eunsook

2013-01-01

Motivation is an important foundation of academic development in students. This article discusses academic motivation; its various component concepts in areas such as beliefs, goals, and values; and intrinsic and extrinsic motivation. It also presents major, widely studied theoretical perspectives of academic motivation and briefly illustrates…

Innovations in human genetics education. Incorporation of genetics into a problem-based medical school curriculum.

PubMed Central

Swinford, A E; McKeag, D B

1990-01-01

There has been recent interest in the development of problem-based human genetics curricula in U.S. medical schools. The College of Human Medicine at Michigan State University has had a problem-based curriculum since 1974. The vertical integration of genetics within the problem-based curriculum, called "Track II," has recently been revised. On first inspection, the curriculum appeared to lack a significant genetics component; however, on further analysis it was found that many genetics concepts were covered in the biochemistry, microbiology, pathology, and clinical science components. Both basic science concepts and clinical applications of genetics are covered in the curriculum by providing appropriate references for basic concepts and including inherited conditions within the differential diagnosis in the cases studied. Evaluations consist of a multiple-choice content exam and a modified essay exam based on a clinical case, allowing evaluation of both basic concepts and problem-solving ability. This curriculum prepares students to use genetics in a clinical context in their future careers. PMID:2220816

Visualizing Sound: Demonstrations to Teach Acoustic Concepts

NASA Astrophysics Data System (ADS)

Rennoll, Valerie

Interference, a phenomenon in which two sound waves superpose to form a resultant wave of greater or lower amplitude, is a key concept when learning about the physics of sound waves. Typical interference demonstrations involve students listening for changes in sound level as they move throughout a room. Here, new tools are developed to teach this concept that provide a visual component, allowing individuals to see changes in sound level on a light display. This is accomplished using a microcontroller that analyzes sound levels collected by a microphone and displays the sound level in real-time on an LED strip. The light display is placed on a sliding rail between two speakers to show the interference occurring between two sound waves. When a long-exposure photograph is taken of the light display being slid from one end of the rail to the other, a wave of the interference pattern can be captured. By providing a visual component, these tools will help students and the general public to better understand interference, a key concept in acoustics.

An Architecture for Standardized Terminology Services by Wrapping and Integration of Existing Applications

PubMed Central

Cornet, Ronald; Prins, Antoon K.

2003-01-01

Research on terminology services has resulted in development of applications and definition of standards, but has not yet led to widespread use of (standardized) terminology services in practice. Current terminology services offer functionality both for concept representation and lexical knowledge representation, hampering the possibility of combining the strengths of dedicated (concept and lexical) services. We therefore propose an extensible architecture in which concept-related and lexicon-related components are integrated and made available through a uniform interface. This interface can be extended in order to conform to existing standards, making it possible to use dedicated (third-party) components in a standardized way. As a proof of concept and a reference implementation, a SOAP-based Java implementation of the terminology service is being developed, providing wrappers for Protégé and UMLS Knowledge Source Server. Other systems, such as the Description Logic-based reasoner RACER can be easily integrated by implementation of an appropriate wrapper. PMID:14728158

Delusional mood and delusional perception -- a phenomenological analysis.

PubMed

Fuchs, Thomas

2005-01-01

In the initial stages of schizophrenia, the environment as perceived by the patient changes into a puzzling, mysterious and stage-like scenery. At the same time, objects or persons may gain an overwhelming physiognomic expression and may even fuse with the patient's body. The paper explains these different alterations using Husserl's concept of intentional perception on the one hand, and Merleau-Ponty's concept of embodied perception on the other hand. The first may also be understood as describing the intersubjective constitution of reality through common concepts which structure intentional perception. The latter points to the embodiment of the perceiving subject and uncovers our intimate connection with the world mediated by the lived body. Thus, in each perception, an active, intentional or 'gnostic' component and a bodily, 'pathic' component work together. On this basis, the alteration of schizophrenic perception in delusional mood may be described as a paralysis of intentionality, or of the 'gnostic' component of perception. The synthetic and sense-bestowing processes effective in perception are seriously disturbed. On the other hand, as a result of the disturbance of intentional perception, physiognomic and expressive properties are set free within the perceptual field. The 'pathic' component of perception becomes independent. Thus, the intersubjective constitution of reality is replaced by idiosyncratic meanings and qualities of perception, leading finally into delusional perception.

Modelling Creativity: Identifying Key Components through a Corpus-Based Approach.

PubMed

Jordanous, Anna; Keller, Bill

2016-01-01

Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research.

Operational Design and ISR and Zombies or How Operational Design Can Help to Re-aggregate Joint ISR at the Theater and Component Levels

DTIC Science & Technology

2010-04-01

effects and objectives." 47 The JIOC, components, and end users, in coordination with the organization conducting Collection Operation Management (COM...CFACC Combined Force Air Component Commander COA Course of Action COG Center of Gravity COM Collection Operation Management CONOPS Concept of

Budgetary and Programmatic Fluctuations during the System Development and Demonstration Phase: A Case Study of the Marine Corps H-1 Upgrade Program

DTIC Science & Technology

2007-12-01

impact of economic change might include a closing factory, market manipulation, the signing of international trade 17 treaties, or the global...Refinement System Intergration System Demonstration Concept Decision BA C LRIP Full-Rate Production & Deployment System Development and Demonstration...BLOCK III Concept Exploration Component Advanced Development Concept and Technology Development System Intergration System Demonstration Decision Review

Maternal exposure to the Dutch Famine before conception and during pregnancy: quality of life and depressive symptoms in adult offspring

PubMed Central

Stein, Aryeh D.; Pierik, Frank H.; Verrips, G.H.W.; Susser, Ezra S.; Lumey, L. H.

2013-01-01

Background Gestational exposure to famine has been associated with several chronic diseases in adulthood, but few studies in humans have related prenatal famine exposure to health-related quality of life. We used the circumstances of the Dutch Famine of 1944-1945 (during which official rations were =900 kcal/day for 24 weeks) to assess whether exposure to famine prior to conception or at specified stages of pregnancy was related to self-reported health-related quality of life and depressive symptoms in adulthood. Methods We studied 923 individuals including persons born in western Holland between January 1945 and March 1946, persons born in the same 3 institutions in 1943 and 1947 and same-sex siblings of persons in series 1 or 2. Between 2003 and 2005 (mean age 59 y), we assessed self-reported quality of life with the Short Form 36 questionnaire and derived mental and physical component scores. Depressive symptoms were assessed with the Center for Epidemiologic Studies Depression scale. Results Mean mental and physical component scores were 52.4 (SD = 9.4) and 48.9 (9.0), respectively. The mean depression score was 11.6 (7.4). Age-, sex- and schooling-adjusted estimates for mutually adjusted exposures were -2.48 for the mental component score with exposure before conception (95% confidence interval = -4.46 to 0.50) and 0.07 with exposure during pregnancy (-1.15 to 1.29). Adjusted estimates for the physical component score were 1.26 with exposure before conception (-0.67 to 3.19) and -0.73 with exposure during pregnancy (1.94 to 0.48). Adjusted estimates for the depression score were 2.07 with exposure before conception (0.60 to 3.54) and 0.96 with exposure during pregnancy (0.09 to 1.88). There was no evidence of heterogeneity of effects by specific periods of pregnancy exposed to famine. Conclusions A mother's exposure to famine prior to conception of her offspring was associated with lower self-reported measures of mental health and quality of life in her adult offspring. PMID:19752733

The Active Audience: Trivia, Exaggeration, or Ideology.

ERIC Educational Resources Information Center

Biocca, Frank

Prompted by the dichotomy in mass communication research between active audience and passive audience, this paper (1) establishes and analyzes the theoretical components of the concepts of "activity" and "active audience," (2) traces the intellectual origins of the concepts and their implicit ideological agenda, and (3)…

SETTING EXPECTATIONS FOR THE ECOLOGICAL CONDITION OF STREAMS: THE CONCEPT OF REFERENCE CONDITION

EPA Science Inventory

An important component of the biological assessment of stream condition is an evaluation of the direct or indirect effects of human activities or disturbances. The concept of a "reference condition" is increasingly used to describe the standard or benchmark against which current ...

Promoting Transfer of Ecosystems Concepts

ERIC Educational Resources Information Center

Yu, Yawen; Hmelo-Silver, Cindy E.; Jordan, Rebecca; Eberbach, Catherine; Sinha, Suparna

2016-01-01

This study examines to what extent students transferred their knowledge from a familiar aquatic ecosystem to an unfamiliar rainforest ecosystem after participating in a technology-rich inquiry curriculum. We coded students' drawings for components of important ecosystems concepts at pre- and posttest. Our analysis examined the extent to which each…

A Three-Dimensional Concept of Worldview

ERIC Educational Resources Information Center

Schultz, Katherine G.; Swezey, James A.

2013-01-01

Several Christian school associations and many Christian schools identify developing a Biblical worldview in their students as an essential component of their organizational mission, yet few report on their level of success. This study investigates the concept of worldview from an Evangelical Christian perspective. The first step in investigating…

Proof of concept for using unmanned aerial vehicles for high mast pole and bridge inspections.

DOT National Transportation Integrated Search

2015-06-01

Bridges and high mast luminaires (HMLs) are key components of transportation infrastructures. Effective inspection : processes are crucial to maintain the structural integrity of these components. The most common approach for : inspections is visual ...

Research on The Construction of Flexible Multi-body Dynamics Model based on Virtual Components

NASA Astrophysics Data System (ADS)

Dong, Z. H.; Ye, X.; Yang, F.

2018-05-01

Focus on the harsh operation condition of space manipulator, which cannot afford relative large collision momentum, this paper proposes a new concept and technology, called soft-contact technology. In order to solve the problem of collision dynamics of flexible multi-body system caused by this technology, this paper also proposes the concepts of virtual components and virtual hinges, and constructs flexible dynamic model based on virtual components, and also studies on its solutions. On this basis, this paper uses NX to carry out model and comparison simulation for space manipulator in 3 different modes. The results show that using the model of multi-rigid body + flexible body hinge + controllable damping can make effective control on amplitude for the force and torque caused by target satellite collision.

An overview of engineering concepts and current design algorithms for probabilistic structural analysis

NASA Technical Reports Server (NTRS)

Duffy, S. F.; Hu, J.; Hopkins, D. A.

1995-01-01

The article begins by examining the fundamentals of traditional deterministic design philosophy. The initial section outlines the concepts of failure criteria and limit state functions two traditional notions that are embedded in deterministic design philosophy. This is followed by a discussion regarding safety factors (a possible limit state function) and the common utilization of statistical concepts in deterministic engineering design approaches. Next the fundamental aspects of a probabilistic failure analysis are explored and it is shown that deterministic design concepts mentioned in the initial portion of the article are embedded in probabilistic design methods. For components fabricated from ceramic materials (and other similarly brittle materials) the probabilistic design approach yields the widely used Weibull analysis after suitable assumptions are incorporated. The authors point out that Weibull analysis provides the rare instance where closed form solutions are available for a probabilistic failure analysis. Since numerical methods are usually required to evaluate component reliabilities, a section on Monte Carlo methods is included to introduce the concept. The article concludes with a presentation of the technical aspects that support the numerical method known as fast probability integration (FPI). This includes a discussion of the Hasofer-Lind and Rackwitz-Fiessler approximations.

Emerging Concepts for Collaboration; Selected Papers. Bulletin No. 40.

ERIC Educational Resources Information Center

James, Richard, Ed.; Brown, Ray, Ed.

This collection of articles deals with collaboration in teacher education. The first paper, "A Conceptual Basis for Collaboration," by Earl D. Clark, synthesizes the concepts and components of collaboration and prescribes the relationships needed between all involved if quality programs are to prevail. The second paper, "Parity and Educational…

Mapping out the Details: Supporting Struggling Writers' Written Expression with Concept Mapping

ERIC Educational Resources Information Center

Flanagan, Sara M.; Bouck, Emily C.

2015-01-01

Written expression is a key component of the secondary curriculum, but many students struggle to produce effective written expression passages. However, written expression can be supported through prewriting strategies such as concept mapping. Using a counterbalanced group design, 19 secondary students alternated between using paper- or…

Self-Esteem and Couples Counseling.

ERIC Educational Resources Information Center

Palisi, Anthony T.

1992-01-01

The components of the self system include self-concept, self-esteem, and self-efficacy. Learning that adds to identity augments self-concept. Learning that leads to self-appraisal relates to self-esteem. Learning that leads to prediction of achievement belongs to self-efficacy. Courage to persist when confronted by a "Gulp!" experience…

Concept development of automatic guidance for rotorcraft obstacle avoidance

NASA Technical Reports Server (NTRS)

Cheng, Victor H. L.

1990-01-01

The automatic guidance of rotorcraft for obstacle avoidance in nap-of-the-earth flight is studied. A hierarchical breakdown of the guidance components is used to identify the functional requirements. These requirements and anticipated sensor capabilities lead to a preliminary guidance concept, which has been evaluated via computer simulations.

Students' Alternative Conceptions of Tropical Cyclone Causes and Processes

ERIC Educational Resources Information Center

Lane, Rod; Coutts, Pamela

2012-01-01

While Shulman argues that an important component of pedagogical content knowledge (PCK) is teachers' understanding of the alternative conceptions commonly held by students, relatively little is known about what students believe about many topics in the school curriculum. This paper focuses on a content area typically featured in Geography…

Development and Evaluation of an Interactive Internet-Based Pharmacokinetic Teaching Module.

ERIC Educational Resources Information Center

Hedaya, Mohsen A.

1998-01-01

Describes an Internet-based, interactive, learner-centered, asynchronous instructional module for pharmacokinetics that requires minimal computer knowledge to operate. Main components are concept presentation, a simulation exercise, and self-assessment questions. The module has been found effective in teaching the steady state concept at the…

An Auto-Configuration System for the GMSEC Architecture and API

NASA Technical Reports Server (NTRS)

Moholt, Joseph; Mayorga, Arturo

2007-01-01

A viewgraph presentation on an automated configuration concept for The Goddard Mission Services Evolution Center (GMSEC) architecture and Application Program Interface (API) is shown. The topics include: 1) The Goddard Mission Services Evolution Center (GMSEC); 2) Automated Configuration Concept; 3) Implementation Approach; and 4) Key Components and Benefits.

A high energy-density nickel-hydrogen battery design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, L.

1982-09-01

A light-weight Ni-H/sub 2/ battery design concept (projected energy-density 46.7 Whr/Kg or 21.2 Whr/Lb) suitable for immediate or near-term spacecraft integration is described. The proposed design does not violate proven and qualified design concepts, or critical electrochemical component designs or functions.

Soil health in grasslands: Are there relevant comparisons with croplands?

USDA-ARS?s Scientific Manuscript database

Interest has grown recently in the concept of soil health, particularly with the promotion of multi-species cover crops in croplands. The concept of soil health embodies earlier efforts on soil quality, but places additional emphasis on the soil biological component of a three-pronged approach to c...

ECOSYSTEM SUSTAINABILITY INDEX FROM INFORMATON THEORY

EPA Science Inventory

The concept of sustainability applies to integrated systems comprising humans and nature. The structures and operation of the human component must be such that these reinforce or promote the persistence of the structures and operation of the natural component. Thus, one of the ch...

Readout concepts for the suppression of the slow component of BaF2 for the upgrade of the TAPS spectrometer at ELSA

NASA Astrophysics Data System (ADS)

Diehl, Stefan; Novotny, Rainer W.; Wohlfahrt, Benjamin; Beck, Reinhard

2015-02-01

For the measurement at extremely high interaction rates with fast scintillators, pile-up of consecutive events is a limiting factor. With a decay time of 600 ps of the fast crossluminescence component, Barium Fluoride (BaF2) is one of the fastest inorganic scintillators known today. However, the dominating slow component with a 3 orders of magnitude longer decay time of 630 ns limits the rate capability. To circumvent this limit, different approaches have been made in the past. The slow component can be suppressed for example by doping the crystals with rare earth ions like La3+. The paper will give an overview over the various concepts investigated in the past and present the suppression via optical band pass filters. This method has been chosen for the upgrade of the BaF2 crystals in the most forward region of the TAPS-spectrometer at ELSA in Bonn. It allows to reuse the existing crystals and to achieve a high degree of suppression of the slow component. The focus of the paper will be on the selection of the filters, the achievable rate capability and the energy resolution of the fast component.

Technical Needs for Prototypic Prognostic Technique Demonstration for Advanced Small Modular Reactor Passive Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, Ryan M.; Coble, Jamie B.; Hirt, Evelyn H.

2013-05-17

This report identifies a number of requirements for prognostics health management of passive systems in AdvSMRs, documents technical gaps in establishing a prototypical prognostic methodology for this purpose, and describes a preliminary research plan for addressing these technical gaps. AdvSMRs span multiple concepts; therefore a technology- and design-neutral approach is taken, with the focus being on characteristics that are likely to be common to all or several AdvSMR concepts. An evaluation of available literature is used to identify proposed concepts for AdvSMRs along with likely operational characteristics. Available operating experience of advanced reactors is used in identifying passive components thatmore » may be subject to degradation, materials likely to be used for these components, and potential modes of degradation of these components. This information helps in assessing measurement needs for PHM systems, as well as defining functional requirements of PHM systems. An assessment of current state-of-the-art approaches to measurements, sensors and instrumentation, diagnostics and prognostics is also documented. This state-of-the-art evaluation, combined with the requirements, may be used to identify technical gaps and research needs in the development, evaluation, and deployment of PHM systems for AdvSMRs. A preliminary research plan to address high-priority research needs for the deployment of PHM systems to AdvSMRs is described, with the objective being the demonstration of prototypic prognostics technology for passive components in AdvSMRs. Greater efficiency in achieving this objective can be gained through judicious selection of materials and degradation modes that are relevant to proposed AdvSMR concepts, and for which significant knowledge already exists. These selections were made based on multiple constraints including the analysis performed in this document, ready access to laboratory-scale facilities for materials testing and measurement, and potential synergies with other national laboratory and university partners.« less

Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part III

NASA Technical Reports Server (NTRS)

Barnes, Bruce W.; Sessions, Alaric M.; Beyon, Jeffrey; Petway, Larry B.

2014-01-01

Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. The existing power system was analyzed to rank components in terms of inefficiency, power dissipation, footprint and mass. Design considerations and priorities are compared along with the results of each design iteration. Overall power system improvements are summarized for design implementations.

Testing the concept of a modulation filter bank: the audibility of component modulation and detection of phase change in three-component modulators.

PubMed

Sek, Aleksander; Moore, Brian C J

2003-05-01

Two experiments were performed to test the concept that the auditory system contains a "modulation filter bank" (MFB). Experiment 1 examined the ability to "hear out" the modulation frequency of the central component of a three-component modulator applied to a 4-kHz sinusoidal carrier. On each trial, three modulated stimuli were presented. The modulator of the first stimulus contained three components. Within a run the frequencies of the outer two components were fixed and the frequency of the central ("target") component was drawn randomly from one of five values. The modulators of second and third stimuli contained one component. One had a frequency equal to that of the target and the other had a frequency randomly selected from one of the other possible values. Subjects indicated whether the target corresponded to the second or third stimulus. Scores were around 80% correct when the components in the three-component modulator were widely spaced and when the frequencies of the target and comparison differed sufficiently. Experiment 2 examined the ability to hear a change in the relative phase of the components in a three-component modulator with harmonically spaced components, using a 31FC task. The frequency of the central component, f(c), was either 50 or 100 Hz. Scores were 80%-90% correct when the component spacing was < or = 0.5 f(c), but decreased markedly for greater spacings. Performance was only slightly impaired by randomizing the overall modulation depth from one stimulus to the next. The results of both experiments are broadly consistent with what would be expected from a MFB with a Q value of 1 or slightly less.

Prototyping of automotive components with variable width and depth

NASA Astrophysics Data System (ADS)

Abeyrathna, B.; Rolfe, B.; Harrasser, J.; Sedlmaier, A.; Ge, Rui; Pan, L.; Weiss, M.

2017-09-01

Roll forming enables the manufacturing of longitudinal components from materials that combine high strength with limited formability and is increasingly used in the automotive industry for the manufacture of structural and crash components. An extension of conventional roll forming is the Flexible Roll Forming (FRF) process where the rolls are no longer fixed in space but are free to move which enables the forming of components with variable cross section over the length of the part. Even though FRF components have high weight saving potential the technology has found only limited application in the automotive industry. A new flexible forming facility has recently been developed that enables proof of concept studies and the production of FRF prototypes before a full FRF line is built; this may lead to a wider uptake of the FRF technology in the automotive industry. In this process, the pre-cut blank is placed between two clamps and the whole set up moves back and forth; a forming roll that is mounted on a servo-controlled platform with six degrees of freedom forms the pre-cut blank to the desired shape. In this study an initial forming concept for the flexible roll forming of an automotive component with variable height is developed using COPRA® FEA RF. This is followed by performing experimental prototyping studies on the new concept forming facility. Using the optical strain measurement system Autogrid Compact, material deformation, part shape and wrinkling severity are analysed for some forming passes and compared with the numerical results. The results show that the numerical model gives a good representation of material behaviour and that with increasing forming severity wrinkling issues need to be overcome in the process.

Dying with dignity: a concept analysis.

PubMed

Hemati, Zeinab; Ashouri, Elaheh; AllahBakhshian, Maryam; Pourfarzad, Zahra; Shirani, Farimah; Safazadeh, Shima; Ziyaei, Marziyeh; Varzeshnejad, Maryam; Hashemi, Maryam; Taleghani, Fariba

2016-05-01

This article is a report of an analysis of the concept of dying with dignity. Dignity is an important component of providing care for dying patients and their families. Nevertheless, given that this concept is poorly defined, concept analysis is one of the best ways to define and clarify the concept of death with dignity with the aim to enhance its application in clinical practice, research and education. A search of multiple nursing and social sciences databases was undertaken, including Academic Search Complete, Science Direct, ProQuest, Scopus, Medline, PubMed, EBSCO, Ovid, Noormage, Cinahl, Magiran, PsycINFO and SID. After an extensive review of the literature from 1998-2014, about 14 related articles were included in the study. Based on these articles, the applications, attributes and experimental results of and references to death with dignity were recorded. Based on this analysis, the most important attributes of this concept included respect for privacy, respect, spiritual peace and hope. The antecedents of this concept included consideration of moral values during caregiving, preservation of human dignity as a patient right and professional ethics, and belief in the dignity of self and others, consideration of culture in providing end-of-life care. The consequences of this concept included a sense of peace in the patient and their family, peaceful death and provision of patient privacy and comfort. The concept of patient dignity has been referred to in many contexts. However, considering the dignity of dying patients commensurate with their culture is the most important component of care provided by nurses to facilitate a peaceful death. Respecting the dignity of the patient results in the reduction of her/his suffering and prepares her/him for a comfortable death. © 2016 John Wiley & Sons Ltd.

Le changement comme tradition dans la recherche et la formation a la recherche en biotechnologie et en peripherie Etude de cas en sciences de la sante, sciences naturelles et genie

NASA Astrophysics Data System (ADS)

Bourque, Claude Julie

Le champ de la recherche scientifique et de la formation a la recherche est traverse depuis quelques dizaines d'annees par plusieurs courants et discours associes au changement, mais peu de travaux empiriques permettent de comprendre ce qui change concretement. C'est la contribution originale de cette these au champ de l'education, plus specifiquement a l'etude sociologique de l'enseignement superieur ou sont concentrees les activites liees a la triade thematique du programme doctoral dans lequel elle a ete produite : recherche, formation et pratique. L'enquete-terrain a ete realisee en 2009 et 2010 aupres de 808 repondants affilies a 60 etablissements au Quebec et a produit un vaste materiau de nature mixte (donnees quantitatives et qualitatives). Un portrait de la nebuleuse biotechnologique qui touche les secteurs des sciences de la sante, des sciences naturelles et du genie a ete realise. Ce domaine concerne des dizaines de disciplines et se revele de nature transdisciplinaire, mais les pratiques n'y sont pas davantage marquees par le changement que celles d'autres domaines connexes. Les dynamiques sociales ont fait l'objet d'analyses comparatives dans quatre contextes: le choix des programmes, des objets et des methodes, le financement, la diffusion et la planification de la carriere. Les resultats indiquent que les echanges entre les agents traditionnellement situes au coeur des activites de recherche dominent ces dynamiques dans tous les contextes etudies. L'etude des representations au fondement des pratiques a revele l'existence de trois ecoles de pensee qui coexistent dans le champ scientifique: academique, pragmatique et economiste. Ces ecoles permettent de categoriser les agents en fonction des zones de fractures qui marquent leurs oppositions tout en identifiant ce qu'ils ont en commun. Les representations et les pratiques liees a la formation temoignent d'un habitus plutot homogene, alors que les contradictions semblent plus souvent ancrees dans des luttes universitaires que scientifiques, concentrees sur la negociation du capital scientifique, symbolique et economique en jeu dans la formation doctorale, dans les carrieres auxquelles elle mene, et dans les qualites du titre de Ph.D. Au final, la confusion entre des logiques opposees peut etre reduite en reinterpretant le changement comme tradition du champ scientifique. Mots-cles Sociologie, education, enseignement superieur, science et technologie, biotechnologie, formation doctorale, champ scientifique, reseaux sociaux

Etude de la Production de Paires de Leptons dans les Interactions Proton-Beryllium a 450 GEV

NASA Astrophysics Data System (ADS)

Aubry, Pierre Rene Roger

L'experience HELIOS a fait une etude precise de la production des paires e^+e^-, mu^+mu^-, mu ^+mu^-+nu, et mu^+/- e^+/- dans les interactions p-Be a 450 GeV. Le detecteur comporte un spectrometre a electrons, un spectrometre a muons, et un ensemble de calorimetres qui peuvent mesurer les photons et l'energie manquante emportee par les neutrinos. Les paires de leptons sont observees dans la region cinematique ^1: eqalign {2/m_mu 6 GeV cr E_{e}&>2.8 GeV cr.25&

Methode d'identification parametrique pour la surveillance in situ des joints a recouvrement par propagation d'ondes vibratoires

NASA Astrophysics Data System (ADS)

Francoeur, Dany

Cette these de doctorat s'inscrit dans le cadre de projets CRIAQ (Consortium de recherche et d'innovation en aerospatiale du Quebec) orientes vers le developpement d'approches embarquees pour la detection de defauts dans des structures aeronautiques. L'originalite de cette these repose sur le developpement et la validation d'une nouvelle methode de detection, quantification et localisation d'une entaille dans une structure de joint a recouvrement par la propagation d'ondes vibratoires. La premiere partie expose l'etat des connaissances sur l'identification d'un defaut dans le contexte du Structural Health Monitoring (SHM), ainsi que la modelisation de joint a recouvrements. Le chapitre 3 developpe le modele de propagation d'onde d'un joint a recouvrement endommage par une entaille pour une onde de flexion dans la plage des moyennes frequences (10-50 kHz). A cette fin, un modele de transmission de ligne (TLM) est realise pour representer un joint unidimensionnel (1D). Ce modele 1D est ensuite adapte a un joint bi-dimensionnel (2D) en faisant l'hypothese d'un front d'onde plan incident et perpendiculaire au joint. Une methode d'identification parametrique est ensuite developpee pour permettre a la fois la calibration du modele du joint a recouvrement sain, la detection puis la caracterisation de l'entaille situee sur le joint. Cette methode est couplee a un algorithme qui permet une recherche exhaustive de tout l'espace parametrique. Cette technique permet d'extraire une zone d'incertitude reliee aux parametres du modele optimal. Une etude de sensibilite est egalement realisee sur l'identification. Plusieurs resultats de mesure sur des joints a recouvrements 1D et 2D sont realisees permettant ainsi l'etude de la repetabilite des resultats et la variabilite de differents cas d'endommagement. Les resultats de cette etude demontrent d'abord que la methode de detection proposee est tres efficace et permet de suivre la progression d'endommagement. De tres bons resultats de quantification et de localisation d'entailles ont ete obtenus dans les divers joints testes (1D et 2D). Il est prevu que l'utilisation d'ondes de Lamb permettraient d'etendre la plage de validite de la methode pour de plus petits dommages. Ces travaux visent d'abord la surveillance in-situ des structures de joint a recouvrements, mais d'autres types de defauts. (comme les disbond) et. de structures complexes sont egalement envisageables. Mots cles : joint a recouvrement, surveillance in situ, localisation et caracterisation de dommages

Dimensions and profiles of the generalized health-related self-concept.

PubMed

Wiesmann, Ulrich; Niehörster, Gabriele; Hannich, Hans-Joachim; Hartmann, Ute

2008-11-01

We explore the significance of health as a potentially self-relevant category from the perspective of dynamic self-concept theory. Our intention was to describe the dimensional structure of the generalized health-related self-concept, to identify particular prototypes of health-related self-definition, and to see if these prototypes would differ with respect to appraisals of health behaviour and subjective health. We conducted a cross-sectional questionnaire study involving 545 college students (23.3% male) at the mean age of 22 years. The self-administered questionnaire assessed a relevant spectrum of health-related cognitions denoting their generalized declarative knowledge about their health (the generalized health-related self-concept). Additionally, participants rated their multiple health behaviour, their perceived health, and their anticipated vulnerability. A principal components analysis of the health-related cognitions revealed the following five dimensions: health-protective dispositions, health-protective motivation, vulnerability, health-risky habits, and external, avoidant motivation. A two-step cluster analysis of the five components identified six profiles of health-related self-concept: careless/carefree, omnipotents, risk-takers, mentally affected, reluctant-avoidant, and medically fragile. These prototypes could be successfully reclassified (97.6%). The six profiles differed with respect to their health behaviour and subjective health appraisals. The dimensional structure represents both resources and deficits with respect to an individual's health-related self-concept. An individual's profile of these dimensions might correspond to a characteristic set of particular health needs and motivations. Successful health communications should follow a complementary strategy of affirming the self-concept.

Central Component Descriptors for Levels of Technological Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Niess, Margaret L.

2013-01-01

Technological pedagogical content knowledge (TPACK) proposes a theoretical framework that incorporates four central components: an overarching conception of what it means to teach with technology, knowledge of students' thinking and understandings of specific topics with technologies, knowledge of curricular materials that incorporate…

Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

NASA Technical Reports Server (NTRS)

Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

1996-01-01

This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

MEMS Deformable Mirror Technology Development for Space-Based Exoplanet Detection

NASA Astrophysics Data System (ADS)

Bierden, Paul; Cornelissen, S.; Ryan, P.

2014-01-01

In the search for earth-like extrasolar planets that has become an important objective for NASA, a critical technology development requirement is to advance deformable mirror (DM) technology. High-actuator-count DMs are critical components for nearly all proposed coronagraph instrument concepts. The science case for exoplanet imaging is strong, and rapid recent advances in test beds with DMs made using microelectromechanical system (MEMS) technology have motivated a number of compelling mission concepts that set technical specifications for their use as wavefront controllers. This research will advance the technology readiness of the MEMS DMs components that are currently at the forefront of the field, and the project will be led by the manufacturer of those components, Boston Micromachines Corporation (BMC). The project aims to demonstrate basic functionality and performance of this key component in critical test environments and in simulated operational environments, while establishing model-based predictions of its performance relative to launch and space environments. Presented will be the current status of the project with modeling and initial test results.

Hierarchical and Multidimensional Academic Self-Concept of Commercial Students.

PubMed

Yeung; Chui; Lau

1999-10-01

Adapting the Marsh (1990) Academic Self-Description Questionnaire (ASDQ), this study examined the academic self-concept of students in a school of commerce in Hong Kong (N = 212). Confirmatory factor analysis found that students clearly distinguished among self-concept constructs in English, Chinese, Math and Statistics, Economics, and Principles of Accounting, and each of these constructs was highly associated with a global Academic self-concept construct, reflecting the validity of each construct in measuring an academic component of self-concept. Domain-specific self-concepts were more highly related with students' intention of course selection in corresponding areas than in nonmatching areas, further supporting the multidimensionality of the students' academic self-concept. Students' self-concepts in the five curriculum domains can be represented by the global Academic self-concept, supporting the hierarchical structure of students' academic self-concept in an educational institution with a specific focus, such as commercial studies. The academic self-concepts of the commercial students are both multidimensional and hierarchical. Copyright 1999 Academic Press.

Change in self-concept during adolescence.

PubMed

Chiam, H K

1987-01-01

Malaysian adolescents, like their Western counterparts, undergo rapid growth and development. It is hypothesized that self-concept improves as adolescents mature and become more adjusted to the changes. This study therefore sought to ascertain whether the self-concept changes with age, not only in the global sense but in the various components of the self-concept. The Tennessee Self-Concept Scale and the Brookover Scale of Academic Ability were administered to 375 adolescent boys, ranging in age from 14.7 to 17.0 years, and to 289 adolescent girls, ranging in age from 14.4 to 17.2 years. The findings show that the self-concept of adolescent boys changes with age in the direction predicted. The trend is less obvious and less consistent for girls.

TOPEX/Poseidon precision orbit determination production and expert system

NASA Technical Reports Server (NTRS)

Putney, Barbara; Zelensky, Nikita; Klosko, Steven

1993-01-01

TOPEX/Poseidon (T/P) is a joint mission between NASA and the Centre National d'Etudes Spatiales (CNES), the French Space Agency. The TOPEX/Poseidon Precision Orbit Determination Production System (PODPS) was developed at Goddard Space Flight Center (NASA/GSFC) to produce the absolute orbital reference required to support the fundamental ocean science goals of this satellite altimeter mission within NASA. The orbital trajectory for T/P is required to have a RMS accuracy of 13 centimeters in its radial component. This requirement is based on the effective use of the satellite altimetry for the isolation of absolute long-wavelength ocean topography important for monitoring global changes in the ocean circulation system. This orbit modeling requirement is at an unprecedented accuracy level for this type of satellite. In order to routinely produce and evaluate these orbits, GSFC has developed a production and supporting expert system. The PODPS is a menu driven system allowing routine importation and processing of tracking data for orbit determination, and an evaluation of the quality of the orbit so produced through a progressive series of tests. Phase 1 of the expert system grades the orbit and displays test results. Later phases undergoing implementation, will prescribe corrective actions when unsatisfactory results are seen. This paper describes the design and implementation of this orbit determination production system and the basis for its orbit accuracy assessment within the expert system.

Modelling Creativity: Identifying Key Components through a Corpus-Based Approach

PubMed Central

2016-01-01

Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research. PMID:27706185

Research gaps and technology needs in development of PHM for passive AdvSMR components

NASA Astrophysics Data System (ADS)

Meyer, Ryan M.; Ramuhalli, Pradeep; Coble, Jamie B.; Hirt, Evelyn H.; Mitchell, Mark R.; Wootan, David W.; Berglin, Eric J.; Bond, Leonard J.; Henagar, Chuck H., Jr.

2014-02-01

Advanced small modular reactors (AdvSMRs), which are based on modularization of advanced reactor concepts, may provide a longer-term alternative to traditional light-water reactors and near-term small modular reactors (SMRs), which are based on integral pressurized water reactor (iPWR) concepts. SMRs are challenged economically because of losses in economy of scale; thus, there is increased motivation to reduce the controllable operations and maintenance costs through automation technologies including prognostics health management (PHM) systems. In this regard, PHM systems have the potential to play a vital role in supporting the deployment of AdvSMRs and face several unique challenges with respect to implementation for passive AdvSMR components. This paper presents a summary of a research gaps and technical needs assessment performed for implementation of PHM for passive AdvSMR components.

Etudes optiques de nouveaux materiaux laser: Des orthosilicates dopes a l'ytterbium: Le yttrium (lutetium,scandium) pentoxide de silicium

NASA Astrophysics Data System (ADS)

Denoyer, Aurelie

La decouverte et l'elaboration de nouveaux materiaux laser solides suscitent beaucoup d'interet parmi la communaute scientifique. En particulier les lasers dans la gamme de frequence du micron debouchent sur beaucoup d'applications, en telecommunication, en medecine, dans le domaine militaire, pour la, decoupe des metaux (lasers de puissance), en optique non lineaire (doublage de frequence, bistabilite optique). Le plus couramment utilise actuellement est le Nd:YAG dans cette famille de laser, mais des remplacants plus performants sont toujours recherches. Les lasers a base d'Yb3+ possedent beaucoup d'avantages compares aux lasers Nd3+ du fait de leur structure electronique simple et de leur deterioration moins rapide. Parmi les matrices cristallines pouvant accueillir l'ytterbium, les orthosilicates Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5 se positionnent tres bien, du fait de leur bonne conductivite thermique et du fort eclatement de leur champ cristallin necessaire a l'elaboration de lasers quasi-3 niveaux. De plus l'etude fine et systematique des proprietes microscopiques de nouveaux materiaux s'avere toujours tres interessante du point de vue de la recherche fondamentale, c'est ainsi que de nouveaux modeles sont concus (par exemple pour le champ cristallin) ou que de nouvelles proprietes inhabituelles sont decouvertes, menant a de nouvelles applications. Ainsi d'autres materiaux dopes a l'ytterbium sont connus pour leurs proprietes de couplage electron-phonon, de couplage magnetique, d'emission cooperative ou encore de bistabilite optique, mais ces proprietes n'ont encore jamais ete mises en evidence dans Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5. Ainsi, cette these a pour but l'etude des proprietes optiques et des interactions microscopiques dans Yb:Y2SiO 5, Yb:Lu2SiO5 et Yb:Sc2SiO5. Nous utilisons principalement les techniques d'absorption IR et de spectroscopie Raman pour determiner les excitations du champ cristallin et les modes de vibration dans le materiau. Des mesures optiques sous champ magnetique ont egalement ete effectuees dans le but de caracteriser le comportement de ces excitations lorsqu'elles sont soumises a l'effet Zeeman. La resonance paramagnetique electronique a permis de completer cette etude de l'eclatement Zeeman suivant toutes les orientations du cristal. Enfin la fluorescence par excitation selective et la fluorescence induite par Raman FT, completent la description des niveaux d'energie et revelent l'existence d'emission cooperative de deux ions Yb3+ et de transferts d'energie. Les resultats de cette these apportent une contribution originale dans le domaine des nouveaux materiaux lasers par l'etude et la comprehension des interactions fines et des proprietes microscopiques d'un materiau en particulier. Ils debouchent a la fois sur des applications possibles dans le domaine de l'optique et des lasers, et sur la comprehension d'aspects fondamentaux. Cette these a prouve l'interet de ces matrices pour leur utilisation comme lasers solides: un fort eclatement du champ cristallin favorable a l'elaboration de laser quasi-3 niveaux, et de larges bandes d'absorption (dues a un fort couplage electron-phonon et a des raies satellites causees par une interaction d'echange entre deux ions Yb3+) qui permettent la generation d'impulsions laser ultra-courtes, l'accordabilite du laser, etc. De plus la miniaturisation des lasers est possible pour l'optique integree grace a des couches minces synthetisees par epitaxie en phase liquide dont nous avons demontre la tres bonne qualite structurale et l'ajustement possible de certains parametres. Nous avons reconstruit le tenseur g du niveau fondamental (qui donne des informations precieuses sur les fonctions d'onde), ceci dans le but d'aider les theoriciens a concevoir un modele de champ cristallin valide. Plusieurs mecanismes de transferts d'energie ont ete mis en evidence: un mecanisme de relaxation d'un site vers l'autre, un mecanisme d'emission cooperative, et un mecanisme d'excitation de l'Yb3+ par le Tm3+ (impurete presente dans le materiau). Ces transferts sont plutot nefastes pour la fabrication d'un laser mais sont interessants pour l'optique non lineaire (doublage de frequence, memoires optiques). Enfin, plusieurs elements (le couplage magnetique de paire, le couplage electron-phonon et l'emission cooperative) nous ont permis de conclure sur le caractere covalent de la matrice. Nous avons d'ailleurs demontre ici le role de la covalence dans l'emission cooperative, transition habituellement attribuee aux interactions multipolaires electriques.

Sensors for ceramic components in advanced propulsion systems: Summary of literature survey and concept analysis, task 3 report

NASA Technical Reports Server (NTRS)

Bennethum, W. H.; Sherwood, L. T.

1988-01-01

The results of a literature survey and concept analysis related to sensing techniques for measuring of surface temperature, strain, and heat flux for (non-specific) ceramic materials exposed to elevated temperatures (to 2200 K) are summarized. Concepts capable of functioning in a gas turbine hot section environment are favored but others are reviewed also. Recommendation are made for sensor development in each of the three areas.

Command Climate: The Rise and the Decline of a Military Concept

DTIC Science & Technology

1988-04-29

understands the component parts and nuances of command climaate can change the tone of the climate through guidance and direction. Clearly, of the three...values, restore the vagueness of the Constitution, change leadership, and decide what to do with a military concept called command climate. The first...climate concept. Three were related to publications and the last was the change in leadership of the Army as GEN Carl E. Vuono became the new Chief of

Visual unit analysis: a descriptive approach to landscape assessment

Treesearch

R. J. Tetlow; S. R. J. Sheppard

1979-01-01

Analysis of the visible attributes of landscapes is an important component of the planning process. When landscapes are at regional scale, economical and effective methodologies are critical. The Visual Unit concept appears to offer a logical and useful framework for description and evaluation. The concept subdivides landscape into coherent, spatially-defined units....

The Development of a Concept Inventory for Engineering Graphics

ERIC Educational Resources Information Center

Nozaki, Steven Yasuto

2017-01-01

Graphics education has been a central component in the engineering course of study. As technology advances, so have the methods in which graphics are expressed and practiced. Though the of media of graphics education have evolved, the concepts of the field remain relatively consistent. Tools are needed to measure students' comprehension,…

The Effectiveness of Scientific Inquiry With/Without Integration of Scientific Reasoning

ERIC Educational Resources Information Center

Chen, Chun-Ting; She, Hsiao-Ching

2015-01-01

This study examines the difference in effectiveness between two scientific inquiry programs-one with an emphasis on scientific reasoning and one without a scientific reasoning component-on students' scientific concepts, scientific concept-dependent reasoning, and scientific inquiry. A mixed-method approach was used in which 115 grade 5…

Understanding Statistical Concepts and Terms in Context: The GovStat Ontology and the Statistical Interactive Glossary.

ERIC Educational Resources Information Center

Haas, Stephanie W.; Pattuelli, Maria Cristina; Brown, Ron T.

2003-01-01

Describes the Statistical Interactive Glossary (SIG), an enhanced glossary of statistical terms supported by the GovStat ontology of statistical concepts. Presents a conceptual framework whose components articulate different aspects of a term's basic explanation that can be manipulated to produce a variety of presentations. The overarching…

The Role of Visual Learning in Improving Students' High-Order Thinking Skills

ERIC Educational Resources Information Center

Raiyn, Jamal

2016-01-01

Various concepts have been introduced to improve students' analytical thinking skills based on problem based learning (PBL). This paper introduces a new concept to increase student's analytical thinking skills based on a visual learning strategy. Such a strategy has three fundamental components: a teacher, a student, and a learning process. The…

Children's Scripts for Social Emotions: Causes and Consequences Are More Central than Are Facial Expressions

ERIC Educational Resources Information Center

Widen, Sherri C.; Russell, James A.

2010-01-01

Understanding and recognition of emotions relies on emotion concepts, which are narrative structures (scripts) specifying facial expressions, causes, consequences, label, etc. organized in a temporal and causal order. Scripts and their development are revealed by examining which components better tap which concepts at which ages. This study…

Developing Second Grade Teachers' Pedagogical Content Knowledge of Place Value

ERIC Educational Resources Information Center

Kulhanek, Stefani Michelle

2013-01-01

An understanding of whole number place value is a critical component of second-grade mathematics. This understanding of place value provides the foundational concept for operations with whole numbers. The ability to understand the concept of place value and transfer that understanding to teaching addition and subtraction are often problems…

The Concept of English Philologists' Training at Swiss Universities

ERIC Educational Resources Information Center

Zasluzhena, Alla

2016-01-01

The issue of plurilingual approach usage to the study of foreign languages has been made actual on case study of Swiss universities. Basic concepts of English philologists' formation at Swiss universities have been determined. These components have been analyzed with relation to their relevance to the prospective philologist in English Linguistics…

Patterns of Inclusion: Fostering Digital Citizenship through Hybrid Education

ERIC Educational Resources Information Center

Pedersen, Alex Young; Nørgaard, Rikke Toft; Köppe, Christian

2018-01-01

Reconsidering the concept of digital citizenship and the essential component of education, the authors propose that the concept of Hybrid Education may serve both as a guideline for the utilization of digital technologies in education and as a methodology for fostering new forms of participation, inclusion and engagement in society. Following T.…

Integrating Science and Mathematics Curricula Using Computer Mediated Communications: A Vygotskian Perspective.

ERIC Educational Resources Information Center

Charnitski, Christina Wotell; Harvey, Francis A.

This paper presents the theories of L.S. Vygotsky as a conceptual framework for implementing instruction that supports concept development and promotes higher level thinking skills in students. Three major components (i.e., language, scientific and spontaneous concepts, and the zone of proximal development) of Vygotsky's socio-cultural-historical…

Students' Views on Physical Development and Physical Self-Concept in Adventure-Physical Education

ERIC Educational Resources Information Center

Gehris, Jeffrey; Kress, Jeff; Swalm, Ricky

2010-01-01

This study investigated 10th-grade students' views concerning the physical effects of an adventure-physical education curriculum and the potential of such a curriculum to enhance components of a multidimensional model of physical self-concept. Semistructured interviews were used to obtain students' views and participant observations were conducted…

Improving the Usefulness of Concept Maps as a Research Tool for Science Education

ERIC Educational Resources Information Center

Van Zele, Els; Lenaerts, Josephina; Wieme, Willem

2004-01-01

The search for authentic science research tools to evaluate student understanding in a hybrid learning environment with a large multimedia component has resulted in the use of concept maps as a representation of student's knowledge organization. One hundred and seventy third-semester introductory university-level engineering students represented…

Developing Skills versus Reinforcing Concepts in Physics Labs: Insight from a Survey of Students' Beliefs about Experimental Physics

ERIC Educational Resources Information Center

Wilcox, Bethany R.; Lewandowski, H. J.

2017-01-01

Physics laboratory courses have been generally acknowledged as an important component of the undergraduate curriculum, particularly with respect to developing students' interest in, and understanding of, experimental physics. There are a number of possible learning goals for these courses including reinforcing physics concepts, developing…

Economic Education in the Elementary Schools, Level 3.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL. Div. of Instructional Planning and Support.

This pamphlet is the fourth grade component of a series of elementary level economics and consumer education teaching resources. It contains objectives and key concepts for economic education which have been identified by the Florida State Department of Education. The first part of the document lists these objectives and concepts, as well as…

ARTIST CONCEPT - CUTAWAY VIEW SKYLAB 1 ORBITAL WORKSHOP (OWS)

NASA Image and Video Library

1973-05-23

S73-23919 (May 1973) --- An artist's concept illustrating a cutaway view of the Skylab 1 Orbital Workshop (OWS). The OWS is one of the five major components of the Skylab 1 space station cluster which was launched by a Saturn V on May 14, 1973 into Earth orbit. Photo credit: NASA

Artist Concept - Illustration Cutaway View - Skylab (SL)-1 Orbital Workshop (OWS)

NASA Image and Video Library

1973-05-23

S73-23918 (May 1973) --- An artist's concept illustrating a cutaway view of the Skylab 1 Orbital Workshop (OWS). The OWS is one of the five major components of the Skylab 1 space station cluster which was launched by a Saturn V on May 14, 1973 into Earth orbit. Photo credit: NASA

Psychological Separation, Attachment Security, Vocational Self-Concept Crystallization, and Career Indecision: A Structural Equation Analysis.

ERIC Educational Resources Information Center

Tokar, David M.; Withrow, Jason R.; Hall, Rosalie J.; Moradi, Bonnie

2003-01-01

Structural equation modeling was used to test theoretically based models in which psychological separation and attachment security variables were related to career indecision and those relations were mediated through vocational self-concept crystallization. Results indicated that some components of separation and attachment security did relate to…

Testing the Twofold Multidimensionality of Academic Self-Concept: A Study with Chinese Vocational Students

ERIC Educational Resources Information Center

Yang, Lan; Arens, A. Katrin; Watkins, David A.

2016-01-01

In order to extend previous research on the twofold multidimensionality of academic self-concept (i.e. its domain-specific structure and separation into competence and affect components), the present study tests its generalisability among vocational students from mainland China. A Chinese version of self-description questionnaire I was…

Self-Determination: A Critical Component of Education

ERIC Educational Resources Information Center

Denney, Stephen C.; Daviso, Alfred W.

2012-01-01

Self-Determination is a central concept in special education practice and policy. Research indicates that students who possess specific self-determination skills have better outcomes and enhanced quality of life. Self-determination is a broad term and can be looked at in a variety of ways with differing values of importance. The concept of…

Using Informal Inferential Reasoning to Develop Formal Concepts: Analyzing an Activity

ERIC Educational Resources Information Center

Weinberg, Aaron; Wiesner, Emilie; Pfaff, Thomas J.

2010-01-01

Inferential reasoning is a central component of statistics. Researchers have suggested that students should develop an informal understanding of the ideas that underlie inference before learning the concepts formally. This paper presents a hands-on activity that is designed to help students in an introductory statistics course draw informal…

Flat Tile Armour Cooled by Hypervapotron Tube: a Possible Technology for ITER

NASA Astrophysics Data System (ADS)

Schlosser, J.; Escourbiac, F.; Merola, M.; Schedler, B.; Bayetti, P.; Missirlian, M.; Mitteau, R.; Robin-Vastra, I.

Carbon fibre composite (CFC) flat tile armours for actively cooled plasma facing components (PFC’s) are an important challenge for controlled fusion machines. Flat tile concepts, water cooled by tubes, were studied, developed, tested and finally operated with success in Tore Supra. The components were designed for 10 MW/m2 and mock-ups were successfully fatigue tested at 15 MW/m2, 1000 cycles. For ITER, a tube-in-tile concept was developed and mock-ups sustained up to 25 MW/m2 for 1000 cycles without failure. Recently flat tile armoured mock-ups cooled by a hypervapotron tube successfully sustained a cascade failure test under a mean heat flux of 10 MW/m2 but with a doubling of the heat flux on some tiles to simulate missing tiles (500 cycles). This encouraging results lead to reconsider the limits for flat tile concept when cooled by hypervapotron (HV) tube. New tests are now scheduled to investigate these limits in regard to the ITER requirements. Experimental evidence of the concept could be gained in Tore Supra by installing a new limiter into the machine.

Unified concept of effective one component plasma for hot dense plasmas

DOE PAGES

Clerouin, Jean; Arnault, Philippe; Ticknor, Christopher; ...

2016-03-17

Orbital-free molecular dynamics simulations are used to benchmark two popular models for hot dense plasmas: the one component plasma (OCP) and the Yukawa model. A unified concept emerges where an effective OCP (EOCP) is constructed from the short-range structure of the plasma. An unambiguous ionization and the screening length can be defined and used for a Yukawa system, which reproduces the long-range structure with finite compressibility. Similarly, the dispersion relation of longitudinal waves is consistent with the screened model at vanishing wave number but merges with the OCP at high wave number. Additionally, the EOCP reproduces the overall relaxation timemore » scales of the correlation functions associated with ionic motion. Lastly, in the hot dense regime, this unified concept of EOCP can be fruitfully applied to deduce properties such as the equation of state, ionic transport coefficients, and the ion feature in x-ray Thomson scattering experiments.« less

The classification of wind shears from the point of view of aerodynamics and flight mechanics

NASA Technical Reports Server (NTRS)

Seidler, Fritz; Hensel, Gunter

1987-01-01

A study of international statistical data shows that in about three quarters of all serious accidents which occurred with jet propelled airliners wind shear was either one of the main causes of the accident or represented a major contributory cause. Wind shear related problems are examined. The necessity of a use of different concepts, definitions, and divisions is explained, and the concepts and definitions required for the division of wind and wind shear into different categories is discussed. A description of the context between meteorological and aerodynamics-flight mechanics concepts, definitions, and divisions is also provided. Attention is given to wind and wind components, general characteristics of wind shear and the meteorological terms, the basic types of wind shear for aerodynamics-flight mechanics investigations, special types of wind shear for aerodynamics-flight mechanics investigations, and possibilities regarding a change of the wind component.

Materials and structure synergistic with in-space materials utilization. [as means of reducing costs of space missions, colonization, and settlements

NASA Technical Reports Server (NTRS)

Ramohalli, Kumar; Shadman, Farhang; Sridhar, K. R.

1992-01-01

The significant advances made recently toward actual hardware realizations of various concepts for the application of in-space materials utilization (ISMU) are demonstrated. The overall plan for taking innovative concepts through technical feasibility, small-scale tests, scale-up, computer modeling, and larger-scale execution is outlined. Two specific fields of endeavor are surveyed: one has direct applications to construction on the moon, while the other has more basic implications, in addition to the practical aspects of lunar colonies. Several fundamental scientific advances made in the characterization of the physical and chemical processes that need to be elucidated for any intelligent application of the ISMU concepts in future space missions are described. A rigorous quantitative technique for the unambiguous evaluation of various components and component technology that form any space (or terrestrial mission) is also described.

Progress in the Phase 0 Model Development of a STAR Concept for Dynamics and Control Testing

NASA Technical Reports Server (NTRS)

Woods-Vedeler, Jessica A.; Armand, Sasan C.

2003-01-01

The paper describes progress in the development of a lightweight, deployable passive Synthetic Thinned Aperture Radiometer (STAR). The spacecraft concept presented will enable the realization of 10 km resolution global soil moisture and ocean salinity measurements at 1.41 GHz. The focus of this work was on definition of an approximately 1/3-scaled, 5-meter Phase 0 test article for concept demonstration and dynamics and control testing. Design requirements, parameters and a multi-parameter, hybrid scaling approach for the dynamically scaled test model were established. The El Scaling Approach that was established allows designers freedom to define the cross section of scaled, lightweight structural components that is most convenient for manufacturing when the mass of the component is small compared to the overall system mass. Static and dynamic response analysis was conducted on analytical models to evaluate system level performance and to optimize panel geometry for optimal tension load distribution.

Micro-satellites thermal control—concepts and components

NASA Astrophysics Data System (ADS)

Baturkin, Volodymyr

2005-01-01

The main idea of this paper is to present the survey of current tendencies in micro-satellites thermal control concepts that can be rational and useful for posterior missions due to intensive expansion of satellites of such type. For this purpose, the available references and lessons learned by the National Technical University of Ukraine during the elaboration of thermal control hardware for micro-satellites Magion 4, 5, BIRD and autonomous thermal control systems for interplanetary missions VEGA, PHOBOS have been used. The main parameters taken into consideration for analysis are the satellite sizes, mass, power consumption, orbit parameters, altitude control peculiarities and thermal control description. It was defined that passive thermal control concepts are widely used, excepting autonomous temperature regulation for sensitive components such as batteries, high-precision optics, and some types of sensors. The practical means for realization of passive thermal control design as multi-layer insulation, optical coatings, heat conductive elements, gaskets are briefly described.

Concept for Determining the Life of Ceramic Matrix Composites Using Nondestructive Characterization Techniques

NASA Technical Reports Server (NTRS)

Effinger, Michael; Ellingson, Bill; Spohnholtz, Todd; Koenig, John

2000-01-01

Damping measurements have been taken on ceramic matrix composite (CMC) turbopump blisks in the as fabricated, post proof testing, and post turbopump testing conditions. These results indicate that damping is able to quantify fatigue of the CMC blisk. This gives hope for the potential of determining the actual and residual life of CMC materials using a combination of nondestructive techniques. If successful, then this new paradigm for life prediction of CMCs could revolutionize the approach for designing and servicing CMC components, thereby significantly reducing costs for design, development, health monitoring, and maintenance of CMC components and systems. The Nondestructive Characterization (NDC) life prediction approach would complement life prediction using micromechanics and continuum finite element models. This paper reports on the initial concept of NDC life prediction and how changes in damping and ultrasonic elastic modulus data have established the concept as a possibility.

The development of scientific thinking in elementary school: a comprehensive inventory.

PubMed

Koerber, Susanne; Mayer, Daniela; Osterhaus, Christopher; Schwippert, Knut; Sodian, Beate

2015-01-01

The development of scientific thinking was assessed in 1,581 second, third, and fourth graders (8-, 9-, 10-year-olds) based on a conceptual model that posits developmental progression from naïve to more advanced conceptions. Using a 66-item scale, five components of scientific thinking were addressed, including experimental design, data interpretation, and understanding the nature of science. Unidimensional and multidimensional item response theory analyses supported the instrument's reliability and validity and suggested that the multiple components of scientific thinking form a unitary construct, independent of verbal or reasoning skills. A partial credit model gave evidence for a hierarchical developmental progression. Across each grade transition, advanced conceptions increased while naïve conceptions decreased. Independent effects of intelligence, schooling, and parental education on scientific thinking are discussed. © 2014 The Authors. Child Development © 2014 Society for Research in Child Development, Inc.

Mathematical knowledge in teaching of fraction concepts using diagrammatical approach

NASA Astrophysics Data System (ADS)

Veloo, Palanisamy Kathir; Puteh, Marzita

2017-05-01

Teachers need various types of knowledge in order to deliver various fraction concepts at elementary level. In this paper, Balls' framework (2008) or, Mathematical Knowledge for Teaching (MKT) is used as benchmark guideline. This paper investigates and explores component of MKT knowledge among eight experienced teachers of the primary school. Data was collected using paper pencil test, interview and video recording. This paper, narrowed to teacher's knowledge and their practices while teaching of various fractions concepts using diagrammatical approach in present of MKT. The data gathered from teachers were analyzed using thematic analysis techniques. The results indicated that teachers lack various components of MKT knowledge as a proposal by various researchers and assumed that teaching as procedural more than enough due to lack of deep understanding of mathematics and the various types of MKT is not required due to the present of practices in the mathematics classroom.

Engineering intelligent tutoring systems

NASA Technical Reports Server (NTRS)

Warren, Kimberly C.; Goodman, Bradley A.

1993-01-01

We have defined an object-oriented software architecture for Intelligent Tutoring Systems (ITS's) to facilitate the rapid development, testing, and fielding of ITS's. This software architecture partitions the functionality of the ITS into a collection of software components with well-defined interfaces and execution concept. The architecture was designed to isolate advanced technology components, partition domain dependencies, take advantage of the increased availability of commercial software packages, and reduce the risks involved in acquiring ITS's. A key component of the architecture, the Executive, is a publish and subscribe message handling component that coordinates all communication between ITS components.

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

Perspective: Evolutionary design of granular media and block copolymer patterns

NASA Astrophysics Data System (ADS)

Jaeger, Heinrich M.; de Pablo, Juan J.

2016-05-01

The creation of new materials "by design" is a process that starts from desired materials properties and proceeds to identify requirements for the constituent components. Such process is challenging because it inverts the typical modeling approach, which starts from given micro-level components to predict macro-level properties. We describe how to tackle this inverse problem using concepts from evolutionary computation. These concepts have widespread applicability and open up new opportunities for design as well as discovery. Here we apply them to design tasks involving two very different classes of soft materials, shape-optimized granular media and nanopatterned block copolymer thin films.

Optical character recognition based on nonredundant correlation measurements.

PubMed

Braunecker, B; Hauck, R; Lohmann, A W

1979-08-15

The essence of character recognition is a comparison between the unknown character and a set of reference patterns. Usually, these reference patterns are all possible characters themselves, the whole alphabet in the case of letter characters. Obviously, N analog measurements are highly redundant, since only K = log(2)N binary decisions are enough to identify one out of N characters. Therefore, we devised K reference patterns accordingly. These patterns, called principal components, are found by digital image processing, but used in an optical analog computer. We will explain the concept of principal components, and we will describe experiments with several optical character recognition systems, based on this concept.

Life Extending Control. [mechanical fatigue in reusable rocket engines

NASA Technical Reports Server (NTRS)

Lorenzo, Carl F.; Merrill, Walter C.

1991-01-01

The concept of Life Extending Control is defined. Life is defined in terms of mechanical fatigue life. A brief description is given of the current approach to life prediction using a local, cyclic, stress-strain approach for a critical system component. An alternative approach to life prediction based on a continuous functional relationship to component performance is proposed. Based on cyclic life prediction, an approach to life extending control, called the Life Management Approach, is proposed. A second approach, also based on cyclic life prediction, called the implicit approach, is presented. Assuming the existence of the alternative functional life prediction approach, two additional concepts for Life Extending Control are presented.

Nontraditional inheritance: Genetics and the nature of science, now titled, The puzzle of inheritance: Genetics and the methods of science. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McInerney, J.D.

1998-08-31

This project led to the development of an instructional module designed for use in high school biology classes. The module contains two major components. The first is an overview for teachers, which introduces the module, describes the Human Genome Project, and addresses issues in the philosophy of science and some of the ethical, legal, and social implications of research in genetics. It provides a survey of fundamental genetics concepts and of new, nontraditional concepts of inheritance. The second component provides six instructional activities appropriate for high school or introductory college students.

Experimental assessment of advanced Stirling component concepts

NASA Technical Reports Server (NTRS)

Ziph, B.

1985-01-01

The results of an experimental assessment of some advanced Stirling engine component concepts are presented. High performance piston rings, reciprocating oil scrapers and heat pipes with getters and with mechanical couplings were tested. The tests yielded the following results: (1) Bonded, split, pumping piston rings, in preliminary testing, proved a promising concept, exhibiting low leakage and friction losses. Solid piston rings proved impractical in view of their sensitivity to the operating temperature; (2) A babbit oil scraper in a compliant housing performed well in atmospheric endurance testing. In pressurized tests the scraper did not perform well as a containment seal. The latter tests suggest modifications which may adapt Ti successfully to that application; and (3) Heat pipe endurance tests indicated the adequacy of simple, inexpensive fabrication and filling procedures. Getters were provided to increase the tolerance of the heat pipes to the presence of air and commercially available couplings were demonstrated to be suitable for heat pipe application. In addition to the above tests, the program also included a design effort for a split shaft applicable to a swashplate driven engine with a pressurized crank-case. The design is aimed, and does accomplish, an increase in component life to more than 10,000 hours.

Assessing the social dimension of frailty in old age: A systematic review.

PubMed

Bessa, Bruno; Ribeiro, Oscar; Coelho, Tiago

2018-06-18

Different concepts of frailty have resulted in different assessment tools covering distinct dimensions. Despite the growing recognition that there is an association between frailty and social factors, there's a lack of clarity on what is being assessed in terms of "social aspects" of frailty. This paper provides a review of frailty assessment instruments (screening tools and severity measures) with a special focus on their social components. Systematic review of studies published in English between 2001 and March 2018 in the PubMed database using a combination of MeSH Terms and logical operators through inclusion and exclusion criteria. A total of 27 assessment tools including at least one social question were identified. Three instruments focuses exclusively on social frailty, whereas the weight of social dimensions in the other instruments ranges between 5% and 43%. Social activities, social support, social network, loneliness and living alone were the social concepts most represented by the social components of the various frailty instruments. Social components of frailty vary from instrument to instrument and cover the concepts of social isolation, loneliness, social network, social support and social participation. Copyright © 2018 Elsevier B.V. All rights reserved.

Large holographic 3D display for real-time computer-generated holography

NASA Astrophysics Data System (ADS)

Häussler, R.; Leister, N.; Stolle, H.

2017-06-01

SeeReal's concept of real-time holography is based on Sub-Hologram encoding and tracked Viewing Windows. This solution leads to significant reduction of pixel count and computation effort compared to conventional holography concepts. Since the first presentation of the concept, improved full-color holographic displays were built with dedicated components. The hologram is encoded on a spatial light modulator that is a sandwich of a phase-modulating and an amplitude-modulating liquid-crystal display and that modulates amplitude and phase of light. Further components are based on holographic optical elements for light collimation and focusing which are exposed in photopolymer films. Camera photographs show that only the depth region on which the focus of the camera lens is set is in focus while the other depth regions are out of focus. These photographs demonstrate that the 3D scene is reconstructed in depth and that accommodation of the eye lenses is supported. Hence, the display is a solution to overcome the accommodationconvergence conflict that is inherent for stereoscopic 3D displays. The main components, progress and results of the holographic display with 300 mm x 200 mm active area are described. Furthermore, photographs of holographic reconstructed 3D scenes are shown.

Bantam System Technology Project

NASA Technical Reports Server (NTRS)

Moon, J. M.; Beveridge, J. R.

1998-01-01

This report focuses on determining a best value, low risk, low cost and highly reliable Data and Command System for support of the launch of low cost vehicles which are to carry small payloads into low earth orbit. The ground-based DCS is considered as a component of the overall ground and flight support system which includes the DCS, flight computer, mission planning system and simulator. Interfaces between the DCS and these other component systems are considered. Consideration is also given to the operational aspects of the mission and of the DCS selected. This project involved: defining requirements, defining an efficient operations concept, defining a DCS architecture which satisfies the requirements and concept, conducting a market survey of commercial and government off-the-shelf DCS candidate systems and rating the candidate systems against the requirements/concept. The primary conclusions are that several low cost, off-the-shelf DCS solutions exist and these can be employed to provide for very low cost operations and low recurring maintenance cost. The primary recommendation is that the DCS design/specification should be integrated within the ground and flight support system design as early as possible to ensure ease of interoperability and efficient allocation of automation functions among the component systems.

Mapping an HIV/STD prevention curriculum for Zambian in-school settings.

PubMed

Mpofu, Elias; Lawrence, Frank; Ngoma, Mary Shilalukey; Siziya, Seter; Malungo, Jacob R S

2008-04-01

HIV/AIDS poses grave risk to human development in sub-Saharan Africa. Evidence-based interventions that are rooted in local culture could help efforts to prevent threats to human development from HIV/AIDS. We used concept mapping (Concept System, 2006 ) to construct the components and content of a locally developed HIV/AIDS curriculum for use by secondary schools in Lusaka, Zambia. Participants were school counsellors (n = 14), youth health program officers (n = 7), and regular education teachers (n = 3) from the education, health, and youth development agencies in Lusaka, Zambia (males = 11; females = 13; mean age 38; SD = 15 years). Concept mapping yielded six statement clusters defining preliminary components of a locally grounded in-school HIV/AIDS prevention curriculum and the content items that define these components: (1) life skills education (18 items), (2) sexuality and reproductive health (10 items), (3) treatment, care and support (13 items), (4) counselling (12 items), (5) basic facts about HIV/AIDS (11 items), and (6) dissemination of information about HIV/AIDS (11 items). Zambian locally constructed constructs for an HIV/STD prevention curriculum overlap those promoted by public health programs in the country and internationally.

[The connective tissues, from the origin of the concept to its "Maturation" to extracellular matrix. Application to ocular tissues. Contribution to the history of medical sciences].

PubMed

Labat-Robert, J; Robert, L; Pouliquen, Y

2011-06-01

The "Tissue" concept emerged apparently in the medical literature at about the French revolution, during the second half of the 18(th) century. It was found in the texts written by the physicians of Béarn and Montpellier, the Bordeu-s and also by the famous physician, Felix Vicq d'Azyr, the last attending physician of the queen Marie-Antoinette, "Bordeu et al. (1775) et Pouliquen (2009)". It was elaborated into a coherent doctrine somewhat later by Xavier Bichat, considered as the founder of modern pathological anatomy, Bichat. With the advent of histochemistry, from the beginning of the 20(th) century, several of the principal macromolecular components of connective tissues, collagens, elastin, "acid mucopolysaccharides" (later glycosaminoglycans and proteoglycans) and finally structural glycoproteins were characterized. These constituents of connective tissues were then designated as components of the extracellular matrix (ECM), closely associated to the cellular components of these tissues by adhesive (structural) glycoproteins as fibronectin, several others and cell receptors, "recognising" ECM-components as integrins, the elastin-receptor and others. This molecular arrangement fastens cells to the ECM-components they synthesize and mediates the exchange of informations between the cells to the ECM (inside-out) and also from the ECM-components to the cells (outside-in). This macromolecular arrangement is specific for each tissue as a result of the differentiation of their cellular components. It is also the basis and condition of the fulfillment of the specific functions of differentiated tissues. This is a short description of the passage of the "tissue" concept from its vague origin towards its precise identification at the cellular and molecular level up to the recognition of its functional importance and its establishment as an autonomous science. This can be considered as a new example of the importance of metaphors for the progress of science, Keller (1995). Copyright © 2011 Elsevier Masson SAS. All rights reserved.

The principal components model: a model for advancing spirituality and spiritual care within nursing and health care practice.

PubMed

McSherry, Wilfred

2006-07-01

The aim of this study was to generate a deeper understanding of the factors and forces that may inhibit or advance the concepts of spirituality and spiritual care within both nursing and health care. This manuscript presents a model that emerged from a qualitative study using grounded theory. Implementation and use of this model may assist all health care practitioners and organizations to advance the concepts of spirituality and spiritual care within their own sphere of practice. The model has been termed the principal components model because participants identified six components as being crucial to the advancement of spiritual health care. Grounded theory was used meaning that there was concurrent data collection and analysis. Theoretical sampling was used to develop the emerging theory. These processes, along with data analysis, open, axial and theoretical coding led to the identification of a core category and the construction of the principal components model. Fifty-three participants (24 men and 29 women) were recruited and all consented to be interviewed. The sample included nurses (n=24), chaplains (n=7), a social worker (n=1), an occupational therapist (n=1), physiotherapists (n=2), patients (n=14) and the public (n=4). The investigation was conducted in three phases to substantiate the emerging theory and the development of the model. The principal components model contained six components: individuality, inclusivity, integrated, inter/intra-disciplinary, innate and institution. A great deal has been written on the concepts of spirituality and spiritual care. However, rhetoric alone will not remove some of the intrinsic and extrinsic barriers that are inhibiting the advancement of the spiritual dimension in terms of theory and practice. An awareness of and adherence to the principal components model may assist nurses and health care professionals to engage with and overcome some of the structural, organizational, political and social variables that are impacting upon spiritual care.

Assessment of TRAC-PF1/MOD1 version 14. 3 using separate effects critical flow and blowdown experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spindler, B.; Pellissier, M.

1990-01-01

Independent assessment of the TRAC code was conducted at the Centre d'Etudes Nucleaires de Grenoble of the Commissariate a l'Energie Atomique (France) in the frame of the ICAP. This report presents the results of the assessment of TRAC-PF1/MOD1 version 14.3 using critical flow steady state tests (MOBY-DICK, SUPER-MOBY-DICK), and blowdown tests (CANON, SUPER-CANON, VERTICAL-CANON, MARVIKEN, OMEGA-TUBE, OMEGA-BUNDLE). This document, Volume 1, presents the text and tables from this assessment.

Assessment of TRAC-PF1/MOD1 Version 14. 3 using separate effects critical flow and blowdown experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spindler, B.; Pellissier, M.

1990-01-01

Independent assessment of the TRAC code was conducted at the Centre d'Etudes Nucleaires de Grenoble of the Commissariate a l'Energie Atomique (France) in the frame of the ICAP. This report presents the results of the assessment of TRAC-PF1/MOD1 version 14.3 using critical flow steady state tests (MOBY-DICK, SUPER-MOBY-DICK), and blowdown tests (CANON, SUPER-CANON, VERTICAL-CANON, MARVIKEN, OMEGA-TUBE, OMEGA-BUNDLE). This document, Volume 2, presents the experimental data and figures from the assessment.

Garde a l'enfance: Etude sur la remuneration et les conditions de travail dans le domaine de la garde a l'enfance au Canada. Rapport final (Caring for a Living: A Study on Wages and Working Conditions in Canadian Child Care. Final Report).

ERIC Educational Resources Information Center

Canadian Child Care Federation, Ottawa (Ontario).

Between November 1990 and August 1992, a study examined wages and working conditions of child care staff in both licensed group centers and family day care homes in Canada. Three instruments were developed for the study, a short telephone interview for center directors, a follow-up director's questionnaire, and a staff questionnaire. The study…

A Survey of Serious Aircraft Accidents Involving Fatigue Fracture. Volume 2. Rotary-Wing Aircraft (Etude sur des Accidents Importants d’Avions du aux Effets des Fractures de Fatigue. Volume 2. Effets sur des Helicopteres).

DTIC Science & Technology

1983-04-01

Convention on International Civil Aviation, Second Edition , March 1966. 5. WORLD AIRLINE ACCIDENT SUMMARY. Civil Aviation Authority, (Great Britain...people who either provided information, or who suggested other sources of information for the current edition of this survey. E.M.R. Alexander Civil...Waverley, New Zealand. F-28C Tail rotor drive shaft. Fatigue strength reduc- ed by softened condition & surface decarbur- isation. AISA 4130 steel. Ref: NZ

Etudes Asymptotiques en Filtrage Non Lineaire Avec Petit Bruit D’Observation (Asymptotic Studies in Nonlinear Time Filtering with Small Observation Noise)

DTIC Science & Technology

1990-09-26

Tentugal Valente, pour la maniire enthousiaste avtc laquelle il a soutenu ce projet . Je ne dois pas oublier de remercier If, Groupe de Math 6matiques...oial sur un travectie csimue d~veloppement au sein du projet MEFISTO, i. lINRIA - centre de Sophia - Antipolis. 56 Dans cette 6tude asymptotique de...Control and Information Sciences, 83, Springer 1986. 58 [Picard] Picard, J. : Nonlinear filtering and smoothing with high sig - nal-to-noise ratio

Adaptation of a Turbine Test Facility to High-Temperature Research (Adaptation d’un banc de Turbine aux Recherches pour les Hautes Temperatures,

DTIC Science & Technology

1980-12-19

Des hautes temperatures devant turbine sur turborgacteur et turbines A gaz. (High turbine inlet temperatures in turbo - jet engines and gas turbines ... turbo - jet engines .) Revue Gn(rale de Thermique, No. 166, October 1975 15 D. Arnal Etude exprimentale et thgorique de la transition de la couche J.C...r AD-AIOl 374 ROYAL AIRCRAFT ESTABLISHMENT FARNBOROUBH (ENGLAND) F/B 10/1 ADAPTATION OF A TURBINE TEST FACILITY TO HIGH-TEMPERATURE RESEA--ETC(U) DEC

Foreword

NASA Astrophysics Data System (ADS)

Brazovskii, Serguei; Dressel, Martin; Kirova, Natasha

2015-03-01

This volume presents a collection of articles based upon materials of the recent International School and Workshop on Electronic Crystals, ECRYS-2014. The series ECRYS was founded by Serguei Brazovskii and Pierre Monceau in 1993. ECRYS-2014 is the seventh in the sequence of such events, held in France every three years; the last four meetings 2005, 2008, 2011 and 2014 were hosted by the Institut d'Etudes Scientifiques of the CNRS, at Cargese, Corsica, France. Starting from 2011, ECRYS was expanded to a two-week format incorporating summer-school type tutorials of renowned scientists.

Evaluation du programme d'etudes de francais langue seconde en immersion a la 6e annee. La comprehension orale et la production orale, 1990. Rapport Final. (Evaluation of French as a Second Language Study Program for Grade Six Immersion. Oral Comprehension and Speaking Skills, 1990. Final Report).

ERIC Educational Resources Information Center

Theberge, Raymond

An evaluation of Manitoba's French immersion programs at the levels of grades 3, 6, and 9 focused on program effectiveness in teaching listening comprehension and speech skills. The results for grade 6 are presented here. The first section describes the framework of the immersion curriculum and the listening and oral skills targeted in it. The…

Etude des sequences de type consonne constrictive plus voyelle en francais, a l'aide de la radiocinematographie et de l'oscillographie (A Study of the Constrictive Consonant Plus Vowel Sequences in French, Using X-Ray Filming and Oscillography). Publication B-148.

ERIC Educational Resources Information Center

Rochette, Claude; Simard, Claude

A study of the phonetic combination of a constrictive consonant (specifically, [f], [v], and [r]) and a vowel in French using x-ray and oscillograph technology focused on the speed and process of articulation between the consonant and the vowel. The study considered aperture size, nasality, labiality, and accent. Articulation of a total of 407…

Aerodynamics and Acoustics of Propellers, Conference Proceedings of the Fluid Dynamics Symposium Held at Toronto, Canada on 1-4 October 1984

DTIC Science & Technology

1985-02-01

stationnaire. Le Systeme pseudo-instationnaire est constrult en rempla^ant 1 equation de 1’energie le) par la condition de rothalpie uniforme I ■ cte et...la definition de nouvelles helices permet des gains substantiels pour tout le domaine de vol et, notanment, au decollage et en montee. Nous...etudes d’un tel Systeme sont effectuees et I’essai d’une maquette dans la grande soufflerie transsonique SI de Modane est prevu en 1985. On presente

SpaceX Jason-3 Live Launch Broadcast - Part 1 of 4

NASA Image and Video Library

2016-01-17

At Space Launch Complex 4 at Vandenberg Air Force Base in California, a SpaceX Falcon 9 rocket launches the Jason-3 spacecraft into orbit for NOAA, the National Oceanic and Atmospheric Administration, and EUMETSAT, the European Organization for the Exploitation of Meteorological Satellites. Built by Thales Alenia of France, Jason-3 will measure the topography of the ocean surface for a four-agency international partnership consisting of NOAA, NASA, Centre National d’Etudes Spatiales, France’s space agency, and the European Organization for the Exploitation of Meteorological Satellites.

SpaceX Jason-3 Live Launch Broadcast - Part 4 of 4

NASA Image and Video Library

2016-01-17

At Space Launch Complex 4 at Vandenberg Air Force Base in California, a SpaceX Falcon 9 rocket launches the Jason-3 spacecraft into orbit for NOAA, the National Oceanic and Atmospheric Administration, and EUMETSAT, the European Organization for the Exploitation of Meteorological Satellites. Built by Thales Alenia of France, Jason-3 will measure the topography of the ocean surface for a four-agency international partnership consisting of NOAA, NASA, Centre National d’Etudes Spatiales, France’s space agency, and the European Organization for the Exploitation of Meteorological Satellites.

SpaceX Jason-3 Live Launch Broadcast - Part 3 of 4

NASA Image and Video Library

2016-01-17

At Space Launch Complex 4 at Vandenberg Air Force Base in California, a SpaceX Falcon 9 rocket launches the Jason-3 spacecraft into orbit for NOAA, the National Oceanic and Atmospheric Administration, and EUMETSAT, the European Organization for the Exploitation of Meteorological Satellites. Built by Thales Alenia of France, Jason-3 will measure the topography of the ocean surface for a four-agency international partnership consisting of NOAA, NASA, Centre National d’Etudes Spatiales, France’s space agency, and the European Organization for the Exploitation of Meteorological Satellites.

SpaceX Jason-3 Live Launch Broadcast - Part 2 of 4

NASA Image and Video Library

2016-01-17

At Space Launch Complex 4 at Vandenberg Air Force Base in California, a SpaceX Falcon 9 rocket launches the Jason-3 spacecraft into orbit for NOAA, the National Oceanic and Atmospheric Administration, and EUMETSAT, the European Organization for the Exploitation of Meteorological Satellites. Built by Thales Alenia of France, Jason-3 will measure the topography of the ocean surface for a four-agency international partnership consisting of NOAA, NASA, Centre National d’Etudes Spatiales, France’s space agency, and the European Organization for the Exploitation of Meteorological Satellites.

JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

NASA Technical Reports Server (NTRS)

Gaffin, W. O.; Webb, D. E.

1979-01-01

JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

Exploring psychosocial task resolution and self-concept among African-American adolescents.

PubMed

Brookins, C C

1996-06-01

Developmental task resolution and self-concept of adolescents were examined for a sample of 110 African-American youth. The Erikson Psychosocial Stage Inventory was used to measure Erikson's stages of psychological development and the Bronstein-Cruz Child/Adolescent Self-concept and Adjustment Scale was used to measure multiple components of the self-concept. Scores for Self-concept and Resolution of Identity stages were highly correlated although scores on Resolution of Identity, commonly seen as the primary psychosocial task of adolescence, were not related to scores on either Emotional Well-being or Family Relations. The results are discussed in terms of improving understanding of relationships between processes in development, identity, and other salient psychosocial variables.

Cell Concepts of Metal-Sulfur Batteries (Metal = Li, Na, K, Mg): Strategies for Using Sulfur in Energy Storage Applications.

PubMed

Medenbach, Lukas; Adelhelm, Philipp

2017-09-29

There is great interest in using sulfur as active component in rechargeable batteries thanks to its low cost and high specific charge (1672 mAh/g). The electrochemistry of sulfur, however, is complex and cell concepts are required, which differ from conventional designs. This review summarizes different strategies for utilizing sulfur in rechargeable batteries among membrane concepts, polysulfide concepts, all-solid-state concepts as well as high-temperature systems. Among the more popular lithium-sulfur and sodium-sulfur batteries, we also comment on recent results on potassium-sulfur and magnesium-sulfur batteries. Moreover, specific properties related to the type of light metal are discussed.

Structural Definition and Mass Estimation of Lunar Surface Habitats for the Lunar Architecture Team Phase 2 (LAT-2) Study

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Wu, K, Chauncey; Smith, Russell W.

2008-01-01

The Lunar Architecture Team Phase 2 study defined and assessed architecture options for a Lunar Outpost at the Moon's South Pole. The Habitation Focus Element Team was responsible for developing concepts for all of the Habitats and pressurized logistics modules particular to each of the architectures, and defined the shapes, volumes and internal layouts considering human factors, surface operations and safety requirements, as well as Lander mass and volume constraints. The Structures Subsystem Team developed structural concepts, sizing estimates and mass estimates for the primary Habitat structure. In these studies, the primary structure was decomposed into a more detailed list of components to be sized to gain greater insight into concept mass contributors. Structural mass estimates were developed that captured the effect of major design parameters such as internal pressure load. Analytical and empirical equations were developed for each structural component identified. Over 20 different hard-shell, hybrid expandable and inflatable soft-shell Habitat and pressurized logistics module concepts were sized and compared to assess structural performance and efficiency during the study. Habitats were developed in three categories; Mini Habs that are removed from the Lander and placed on the Lunar surface, Monolithic habitats that remain on the Lander, and Habitats that are part of the Mobile Lander system. Each category of Habitat resulted in structural concepts with advantages and disadvantages. The same modular shell components could be used for the Mini Hab concept, maximizing commonality and minimizing development costs. Larger Habitats had higher volumetric mass efficiency and floor area than smaller Habitats (whose mass was dominated by fixed items such as domes and frames). Hybrid and pure expandable Habitat structures were very mass-efficient, but the structures technology is less mature, and the ability to efficiently package and deploy internal subsystems remains an open issue.

Towards Smart and Resilient City: A Conceptual Model

NASA Astrophysics Data System (ADS)

Arafah, Y.; Winarso, H.; Suroso, D. S. A.

2018-05-01

This paper aims to compare five smart city models selected based on a number of specific criteria. Following the comparison and assessment performed, we draw conclusions and further linkages identifying the components and characters found in resilient cities. The purpose of this analysis is to produce a new approach and concept: the “smart and resilient city.” Through in-depth literature study, this paper analyzes five conceptual smart city models deemed to have a background, point of view, and benchmark towards software group, as they focus on welfare, inclusion, social equality, and competitiveness. Analyzing the strategies, methods, and techniques of five smart city models, this paper concludes that there has been no inclusion of resilience concepts in the assessment, especially in the context of natural disasters. Basically, the models are also interrelated and there are some things that overlap. As a recommendation, there is a model that tries to combine the components and character of smart city and resilient city into one entity that is embedded as a whole in a conceptual picture towards the new concept, the “smart and resilient city”. The concept of smart city and resilient city go hand in hand with each other and thus are interrelated. Therefore, it is imperative to study that concept deeper, in this case primarily in the context of disaster.

Do Knowledge-Component Models Need to Incorporate Representational Competencies?

ERIC Educational Resources Information Center

Rau, Martina Angela

2017-01-01

Traditional knowledge-component models describe students' content knowledge (e.g., their ability to carry out problem-solving procedures or their ability to reason about a concept). In many STEM domains, instruction uses multiple visual representations such as graphs, figures, and diagrams. The use of visual representations implies a…

Optimization of composite wood structural components : processing and design choices

Treesearch

Theodore L. Laufenberg

1985-01-01

Decreasing size and quality of the world's forest resources are responsible for interest in producing composite wood structural components. Process and design optimization methods are offered in this paper. Processing concepts for wood composite structural products are reviewed to illustrate manufacturing boundaries and areas of high potential. Structural...

Studying Motivational-Axiological Component of Professional Competence of a College Teacher

ERIC Educational Resources Information Center

Gutsu, E. G.; Demeneva, N. N.; Kochetova, E. V.; Mayasova, T. V.; Belinova, N. V.

2016-01-01

Present article addresses the problem of changing requirements towards professional competencies of higher school teachers due to the introduction of new educational standards. Motivational-axiological component of college teacher's professional competence gets a central position. The article provides the authors' view upon the concept of…

Occupational Component. 36-Level Courses. Teacher Resource Manual. Integrated Occupational Program.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

This 36-level occupational component of Integrated Occupational Program (IOP) consists of 8 occupational clusters composed of 20 occupational courses. Each course contains learning activities so that students in Alberta (Canada) may develop occupational concepts, skills, and attitudes. This teacher's manual consists of the following sections:…

An Ecological Model of the Coordinated School Health Program: A Commentary

ERIC Educational Resources Information Center

Fetro, Joyce V.

2010-01-01

In his article, Lohrmann clearly traces the evolution of school health programs from 3 traditional components to Allensworth and Kolbe's expanded concept comprehensive school health programs (CSHP) comprised of 8 interrelated and synergistic components that historically functioned independently in schools. With completion of "Health Is Academic,"…

Components of Culture in Health for Medical Students' Education.

ERIC Educational Resources Information Center

Tervalon, Melanie

2003-01-01

Describes key themes and components of culture in health care for incorporation into undergraduate medical education. These include teaching the rationale for learning about culture in health care; "culture basics"; data on and concepts of health status; tools and skills for productive cross-cultural clinical encounters; characteristics and…

The Evaluation and Research of Multi-Project Programs: Program Component Analysis.

ERIC Educational Resources Information Center

Baker, Eva L.

1977-01-01

It is difficult to base evaluations on concepts irrelevant to state policy making. Evaluation of a multiproject program requires both time and differentiation of method. Data from the California Early Childhood Program illustrate process variables for program component analysis, and research questions for intraprogram comparison. (CP)

Burst and Principal Components Analyses of MEA Data for 16 Chemicals Describe at Least Three Effects Classes.

EPA Science Inventory

Microelectrode arrays (MEAs) detect drug and chemical induced changes in neuronal network function and have been used for neurotoxicity screening. As a proof-•of-concept, the current study assessed the utility of analytical "fingerprinting" using Principal Components Analysis (P...

Robustness. [in space systems

NASA Technical Reports Server (NTRS)

Ryan, Robert

1993-01-01

The concept of rubustness includes design simplicity, component and path redundancy, desensitization to the parameter and environment variations, control of parameter variations, and punctual operations. These characteristics must be traded with functional concepts, materials, and fabrication approach against the criteria of performance, cost, and reliability. The paper describes the robustness design process, which includes the following seven major coherent steps: translation of vision into requirements, definition of the robustness characteristics desired, criteria formulation of required robustness, concept selection, detail design, manufacturing and verification, operations.

Efficacy of social support on metabolic syndrome among low income rural women in Chiapas, México.

PubMed

Bezares-Sarmiento, Vidalma del Rosario; Bacardí-Gascón, Montserrat; Márquez-Rosa, Sara; Molinero-González, Olga; Estrada-Grimaldo, Martha; Jiménez-Cruz, Arturo

2013-01-01

The purpose of this study was to assess a social support intervention among rural women from Chiapas and its ability to change lifestyles, self-concept, and Metabolic Syndrome (MS). A convenience sample was conducted among older than 16 yo women from a marginalized rural community from central Chiapas. Two questionnaires were used, a self-concept questionnaire and a healthy lifestyle profile. Criteria for components of MS used were those of the International Diabetes Federation. The intervention was conducted over a three month period and divided into 13 sessions that concentrated on social support and were complemented by nutrition education modules. Five hundred eighty six participants met inclusion criteria for the study. At basal time 47% had MS; abdominal obesity, 69%; high levels of glucose, 27%; triglycerides, 56%; systolic blood pressure, 17%; diastolic blood pressure, 15%; and low levels of HDL-cholesterol, 55%. After the intervention, 38% had MS and significant differences were observed in all of the components of MS. The pre and post-intervention dimension scores on the self-concept form 5 (AF5), or self-concept questionnaire, and the Pender Health Promotion and Lifestyle Questionnaire (PETS-1) also yielded significant differences. After a three month social support and nutrition education intervention, significant changes were observed in several dimensions of the AF5 and PETS-1, as well as in MS and its components. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

Structural evaluation of concepts for a solar energy concentrator for Space Station advanced development program

NASA Technical Reports Server (NTRS)

Kenner, Winfred S.; Rhodes, Marvin D.

1994-01-01

Solar dynamic power systems have a higher thermodynamic efficiency than conventional photovoltaic systems; therefore they are attractive for long-term space missions with high electrical power demands. In an investigation conducted in support of a preliminary concept for Space Station Freedom, an approach for a solar dynamic power system was developed and a number of the components for the solar concentrator were fabricated for experimental evaluation. The concentrator consists of hexagonal panels comprised of triangular reflective facets which are supported by a truss. Structural analyses of the solar concentrator and the support truss were conducted using finite-element models. A number of potential component failure scenarios were postulated and the resulting structural performance was assessed. The solar concentrator and support truss were found to be adequate to meet a 1.0-Hz structural dynamics design requirement in pristine condition. However, for some of the simulated component failure conditions, the fundamental frequency dropped below the 1.0-Hz design requirement. As a result, two alternative concepts were developed and assessed. One concept incorporated a tetrahedral ring truss support for the hexagonal panels: the second incorporated a full tetrahedral truss support for the panels. The results indicate that significant improvements in stiffness can be obtained by attaching the panels to a tetrahedral truss, and that this concentrator and support truss will meet the 1.0-Hz design requirement with any of the simulated failure conditions.

An ontology on property for physical, chemical, and biological systems.

PubMed

Dybkaer, René

2004-01-01

Current metrological literature, including the International vocabulary of basic and general terms in metrology (VIM 1993), presents a special language slowly evolved without consistent use of the procedures of terminological work; furthermore, nominal properties are excluded by definition. Both deficiencies create problems in fields, such as laboratory medicine, which have to report results of all types of property, preferably in a unified systematic format. The present text aims at forming a domain ontology around "property", with intensional definitions and systematic terms, mainly using the terminological tools--with some additions--provided by the International Standards ISO 704, 1087-1, and 10241. "System" and "component" are defined, "quantity" is discussed, and the generic concept "property" is given as 'inherent state- or process-descriptive feature of a system including any pertinent components'. Previously, the term 'kind-of-quantity' and quasi-synonyms have been used as primitives; the proposed definition of "kind-of-property" is 'common defining aspect of mutually comparable properties'. "Examination procedure", "examination method", "examination principle", and "examination" are defined, avoiding the term 'test'. The need to distinguish between instances of "characteristic", "property", "type of characteristic", "kind-of-property", and "property value" is emphasized; the latter is defined together with "property value scale". These fundamental concepts are presented in a diagram, and the effect of adding essential characteristics to give expanded definitions is exemplified. Substitution usually leads to unwieldy definitions, but reveals circularity as does exhaustive consecutive listing of defining concepts. The top concept may be generically divided according to many terminological dimensions, especially regarding which operators are allowed among the four sets =, not equal to; <, >; +, -; and x, :. The coordinate concepts defined are termed by the modifiers 'nominal', 'ordinal', 'differential', and 'rational' before '...property'. Other possibilities are given, based on the literature, especially the stepwise division into "nominal property" and "quantity"; "ordinal quantity" and "unitary quantity"; "differential unitary quantity" and "rational unitary quantity". As top concepts, , , , , and are i.a. divided homologously to . The term 'observation' and the modifiers 'qualitative', 'semi-quantitative', and 'quantitative' are avoided. "Metrological unit" and "system of metrological units" are defined together with a number of specific concepts. Some problems with characteristics of "SI unit" are discussed and an alternative system shown. The conceptions of "metrological dimension" are outlined, leading to a definition and specific concepts. The generally accepted IUPAC/IFCC syntax for designations of instantiated properties is 'System (specification)--Component(specification); kind-of-property (specification)', and' 'dedicatedkind-of-property" is defined as 'kind-of-property with given sort of system and any pertinent sorts of component'. The related systematic terms may be generated according to ENV 1614 using generative patterns from ENV 12264. The elements of the appellation and examination result of a singular rational property are diagrammed. Finally, the possibilities of representing properties and their results by the formalisms of relation and function from Set Theory and Object-Oriented Analysis are exemplified.

Mechanical Components Branch Test Facilities and Capabilities

NASA Technical Reports Server (NTRS)

Oswald, Fred B.

2004-01-01

The Mechanical Components Branch at NASA Glenn Research Center formulates, conducts, and manages research focused on propulsion systems for both present and advanced aeronautical and space vehicles. The branch is comprised of research teams that perform basic research in three areas: mechanical drives, aerospace seals, and space mechanisms. Each team has unique facilities for testing aerospace hardware and concepts. This report presents an overview of the Mechanical Components Branch test facilities.

NOBLE - Flexible concept recognition for large-scale biomedical natural language processing.

PubMed

Tseytlin, Eugene; Mitchell, Kevin; Legowski, Elizabeth; Corrigan, Julia; Chavan, Girish; Jacobson, Rebecca S

2016-01-14

Natural language processing (NLP) applications are increasingly important in biomedical data analysis, knowledge engineering, and decision support. Concept recognition is an important component task for NLP pipelines, and can be either general-purpose or domain-specific. We describe a novel, flexible, and general-purpose concept recognition component for NLP pipelines, and compare its speed and accuracy against five commonly used alternatives on both a biological and clinical corpus. NOBLE Coder implements a general algorithm for matching terms to concepts from an arbitrary vocabulary set. The system's matching options can be configured individually or in combination to yield specific system behavior for a variety of NLP tasks. The software is open source, freely available, and easily integrated into UIMA or GATE. We benchmarked speed and accuracy of the system against the CRAFT and ShARe corpora as reference standards and compared it to MMTx, MGrep, Concept Mapper, cTAKES Dictionary Lookup Annotator, and cTAKES Fast Dictionary Lookup Annotator. We describe key advantages of the NOBLE Coder system and associated tools, including its greedy algorithm, configurable matching strategies, and multiple terminology input formats. These features provide unique functionality when compared with existing alternatives, including state-of-the-art systems. On two benchmarking tasks, NOBLE's performance exceeded commonly used alternatives, performing almost as well as the most advanced systems. Error analysis revealed differences in error profiles among systems. NOBLE Coder is comparable to other widely used concept recognition systems in terms of accuracy and speed. Advantages of NOBLE Coder include its interactive terminology builder tool, ease of configuration, and adaptability to various domains and tasks. NOBLE provides a term-to-concept matching system suitable for general concept recognition in biomedical NLP pipelines.

Industrial approach to piezoelectric damping of large fighter aircraft components

NASA Astrophysics Data System (ADS)

Simpson, John; Schweiger, Johannes

1998-06-01

Different concepts to damp structural vibrations of the vertical tail of fighter aircraft are reported. The various requirements for a vertical tail bias an integrated approach for the design. Several active vibrations suppression concepts had been investigated during the preparatory phase of a research program shared by Daimler-Benz Aerospace Military Aircraft (Dasa), Daimler-Benz Forschung (DBF) and Deutsche Forschungsandstalt fuer Luftund Raumfahrt (DLR). Now in the main phase of the programme, four concepts were finally chosen: two concepts with aerodynamic control surfaces and two concepts with piezoelectric components. One piezo concept approach will be described rigorously, the other concepts are briefly addressed. In the Dasa concept, thin surface piezo actuators are set out carefully to flatten the dynamic portion of the combined static and dynamic maximum bending moment loading case directly in the shell structure. The second piezo concept by DLR involves pre-loaded lead zirconate titanate (PZT)-block actuators at host structure fixtures. To this end a research apparatus was designed and built as a full scale simplified fin box with carbon fiber reinformed plastic skins and an aluminium stringer-rib substructure restrained by relevant aircraft fixtures. It constitutes a benchmark 3D-structural impedance. The engineering design incorporates 7kg of PZT surface actuators. The structural system then should be excited to more than 15mm tip displacement amplitude. This prepares the final step to total A/C integration. Typical analysis methods using cyclic thermal analogies adapted to induced load levels are compared. Commercial approaches leading onto basic state space model interpretation wrt. actuator sizing and positioning, structural integrity constraints, FE-validation and testing are described. Both piezoelectric strategies are aimed at straight open-loop performance related to concept weight penalty and input electric power. The required actuators, power and integration are then enhanced to specification standards. An adapted qualification program plan is used to improve analytical read across, specifications, manufacturing decisions, handling requirements. The next research goals are outlined.

Implications of the South African Constitution on Quality Assurance in Higher Education

ERIC Educational Resources Information Center

Mammen, K. John

2006-01-01

The article addresses the concept of quality assurance (QA) and its relation to quality in higher education which itself is a component of total quality management. It then examines the regulatory policies for higher education followed by the meaning of the concept of democracy in the South African Constitution and its impact and implications on…

Whatever Works: A Test of the "Division of Labor" Component of Uses and Gratifications Theory.

ERIC Educational Resources Information Center

Carvalho, John

The 1974 book, "The Uses of Mass Communication: Current Perspectives on Gratifications Research" introduced the concept of a "division of labor"--that certain media work better than others in meeting audience gratifications. Since the division of labor concept has not been subjected to empirical testing, a study elaborated an…

Representing Swiss Vocational Education and Training Teachers' Domain-Specific Conceptions of Financial Literacy Using Concept Maps

ERIC Educational Resources Information Center

Leumann, Seraina

2017-01-01

Issues related to financial matters are an integral component of the curricula in vocational education and training in Switzerland. However, the differences between students' competences are caused not only by the curricula but by multiple factors. One key factor is teachers' characteristics that support successful learning processes. Teachers'…

Moving Digital Libraries into the Student Learning Space: The GetSmart Experience

ERIC Educational Resources Information Center

Marshall, Byron B.; Chen, Hsinchun; Shen, Rao; Fox, Edward A.

2006-01-01

The GetSmart system was built to support theoretically sound learning processes in a digital library environment by integrating course management, digital library, and concept mapping components to support a constructivist, six-step, information search process. In the fall of 2002 more than 100 students created 1400 concept maps as part of…

Project C.H.A.N.G.E.: Concepts of Handicaps and Attitudes Need Guidance and Education. Teacher Training Program.

ERIC Educational Resources Information Center

Smith, M. Sherry; And Others

The first of six volumes about Project CHANGE (Concepts of Handicaps and Attitudes Need Guidance and Education), a curriculum designed to improve elementary aged children's attitudes toward the disabled, presents information on installation and management of the inservice teacher training component, audiovisual materials for the teacher training…

7th Grade Students' Mental Models about the Concept of "Sustainable Development"

ERIC Educational Resources Information Center

Keles, Özgül; Eris, Rabia; Aydogdu, Mustafa

2017-01-01

The purpose of the current study is to elicit the opinions constructed by 7th grade secondary school students about three components of the concept of sustainable development; environment, society and economy. Study group of the implementation consists of 20 students attending a public secondary school in 2014-2015 academic year. The study…

Learning from Evaluation by Peer Team: A Case Study of a Family Counselling Organization

ERIC Educational Resources Information Center

Muniute-Cobb, Eivina I.; Alfred, Mary V.

2010-01-01

This qualitative study explores how employees learn from Team Primacy Concept-based employee evaluation and how they use the feedback in performing their jobs. Team Primacy Concept-based evaluation is a type of multirater evaluation. The distinctive characteristic of such evaluation is its peer feedback component during which the employee's…

Substitution and Sameness: Two Components of a Relational Conception of the Equals Sign

ERIC Educational Resources Information Center

Jones, Ian; Inglis, Matthew; Gilmore, Camilla; Dowens, Margaret

2012-01-01

A sophisticated and flexible understanding of the equals sign (=) is important for arithmetic competence and for learning further mathematics, particularly algebra. Research has identified two common conceptions held by children: the equals sign as an operator and the equals sign as signaling the same value on both sides of the equation. We argue…

The Moderating Effect of Instructional Conceptions on the Effect of Powerful Learning Environments

ERIC Educational Resources Information Center

Sarfo, Frederick Kwaku; Elen, Jan

2008-01-01

This study aimed at experimentally investigating the moderating role of instructional conceptions on the effectiveness of powerful learning environments (PLE) designed in line with the four-component instructional design model (4C/ID-model). The study also investigated the influence of learning in a 4C/ID PLE on students' instructional…

The prehistory of the cytoskeleton concept.

PubMed

Zampieri, Fabio; Coen, Matteo; Gabbiani, Giulio

2014-08-01

Here we discuss how the concept and the name of cytoskeleton were generated and started to evolve over the last two centuries into what is presently a basic topic of modern biology. We also attempt to describe some facets of the emergence of cytoskeleton component characterization in which our laboratory was in part involved. © 2014 Wiley Periodicals, Inc.

The Virtual Solar System Project: Developing Conceptual Understanding of Astronomical Concepts through Building Three-Dimensional Computational Models.

ERIC Educational Resources Information Center

Keating, Thomas; Barnett, Michael; Barab, Sasha A.; Hay, Kenneth E.

2002-01-01

Describes the Virtual Solar System (VSS) course which is one of the first attempts to integrate three-dimensional (3-D) computer modeling as a central component of introductory undergraduate education. Assesses changes in student understanding of astronomy concepts as a result of participating in an experimental introductory astronomy course in…

Self-Concept and Response Variability as Predictors of Leadership Effectiveness in Cooperative Extension.

ERIC Educational Resources Information Center

Dvorak, Charles F.

The research aimed at determining the extent to which two variables, self-concept and response variability, are related to one of the principal components of Fiedler's Contingency Model of leadership, the Esteem for the Least Preferred Coworker (LPC) instrument. Sixty extension workers in the Expanded Food and Nutrition Education Program in New…

Linking Health Concepts in the Assessment and Evaluation of Water Distribution Systems

ERIC Educational Resources Information Center

Karney, Bryan W.; Filion, Yves R.

2005-01-01

The concept of health is not only a specific criterion for evaluation of water quality delivered by a distribution system but also a suitable paradigm for overall functioning of the hydraulic and structural components of the system. This article views health, despite its complexities, as the only criterion with suitable depth and breadth to allow…

Strategic Factors on Interpreting Remanufacturing Quality-Certifying Framework to Address Warranty Aftermarket for Malaysian Industry

NASA Astrophysics Data System (ADS)

Mohamed, N.; Saman, M. Z. M.; Sharif, S.; Hamzah, H. S.

2018-03-01

While the concept of remanufacturing is gaining popularity globally, literature and theory on strategic decision-making on certifying for warranty in this area remain limited. A strategic and establish concept flow is developed based on extensive literature review and surveys with experienced experts who are dealing with remanufactured, reconditioned, rebuilt and reused components. The remanufacturing research on evaluating quality assurance of remanufactured component targets macro-level parameters and the indicators which must be confirmed for evaluation. The strategic remanufacturing factors identified from the literature review are discussed in a brainstorming session with a number of remanufacturing researchers and academic experts. The study is further broadened by industrial surveys and case studies to justify the inputs on developing a framework to certify remanufactured components. Preliminary results have established the key factors of remanufacturing quality control that might lead to the strict quality assurance of remanufactured components. Later, the developed framework can be used as a benchmarking tool to certify remanufactured components and warranty issuance. The findings serve as the foundation for further research concerning Original Equipment Manufacturer (OEM) or Original Equipment Remanufacturer (OER) and Independent Equipment Remanufacturer (IER) in the Malaysian Remanufacturing Industry.

Development of advanced high temperature in-cylinder components and tribological systems for low heat rejection diesel engines, phase 1

NASA Astrophysics Data System (ADS)

Kroeger, C. A.; Larson, H. J.

1992-03-01

Analysis and concept design work completed in Phase 1 have identified a low heat rejection engine configuration with the potential to meet the Heavy Duty Transport Technology program specific fuel consumption goal of 152 g/kW-hr. The proposed engine configuration incorporates low heat rejection, in-cylinder components designed for operation at 24 MPa peak cylinder pressure. Water cooling is eliminated by selective oil cooling of the components. A high temperature lubricant will be required due to increased in-cylinder operating temperatures. A two-stage turbocharger air system with intercooling and aftercooling was selected to meet engine boost and BMEP requirements. A turbocompound turbine stage is incorporated for exhaust energy recovery. The concept engine cost was estimated to be 43 percent higher compared to a Caterpillar 3176 engine. The higher initial engine cost is predicted to be offset by reduced operating costs due the lower fuel consumption.

Design feasibility study of a divertor component reinforced with fibrous metal matrix composite laminate

NASA Astrophysics Data System (ADS)

You, Jeong-Ha

2005-01-01

Fibrous metal matrix composites possess advanced mechanical properties compared to conventional alloys. It is expected that the application of these composites to a divertor component will enhance the structural reliability. A possible design concept would be a system consisting of tungsten armour, copper composite interlayer and copper heat sink where the composite interlayer is locally inserted into the highly stressed domain near the bond interface. For assessment of the design feasibility of the composite divertor concept, a non-linear multi-scale finite element analysis was performed. To this end, a micro-mechanics algorithm was implemented into a finite element code. A reactor-relevant heat flux load was assumed. Focus was placed on the evolution of stress state, plastic deformation and ductile damage on both macro- and microscopic scales. The structural response of the component and the micro-scale stress evolution of the composite laminate were investigated.

Low Cost, Upper Stage-Class Propulsion

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The low cost, upper stage-class propulsion (LCUSP) element will develop a high strength copper alloy additive manufacturing (AM) process as well as critical components for an upper stage-class propulsion system that will be demonstrated with testing. As manufacturing technologies have matured, it now appears possible to build all the major components and subsystems of an upper stage-class rocket engine for substantially less money and much faster than traditionally done. However, several enabling technologies must be developed before that can happen. This activity will address these technologies and demonstrate the concept by designing, manufacturing, and testing the critical components of a rocket engine. The processes developed and materials' property data will be transitioned to industry upon completion of the activity. Technologies to enable the concept are AM copper alloy process development, AM post-processing finishing to minimize surface roughness, AM material deposition on existing copper alloy substrate, and materials characterization.

Nondestructive Characterization Techniques Used for Ceramic Matrix Composite Life Determination

NASA Technical Reports Server (NTRS)

Effinger, Michael; Koenig, John; Ellingson, Bill; Spohnholtz, Todd

2000-01-01

Recent results indicate that the specific damping capacity and resonant frequency measurements taken periodically during a component's lifetime is able to quantify the mechanical fatigue of CMCS. This gives hope for the potential of determining the actual and residual life of CMC materials using a combination of nondestructive techniques. If successful, then this new paradigm for life prediction of CMCs could revolutionize the approach for designing and servicing CMC components, thereby significantly reducing costs for design, development, health monitoring, and maintenance of CMC components and systems. The Nondestructive Characterization (NDC) life prediction approach would complement life prediction using micromechanics and continuum finite element models. This paper reports on the initial concept of NDC life prediction, a review of the C/SiC blisk damping data, and how changes in the specific damping capacity & ultrasonic elastic modulus data have established the concept as a possibility.

Development of advanced high temperature in-cylinder components and tribological systems for low heat rejection diesel engines, phase 1

NASA Technical Reports Server (NTRS)

Kroeger, C. A.; Larson, H. J.

1992-01-01

Analysis and concept design work completed in Phase 1 have identified a low heat rejection engine configuration with the potential to meet the Heavy Duty Transport Technology program specific fuel consumption goal of 152 g/kW-hr. The proposed engine configuration incorporates low heat rejection, in-cylinder components designed for operation at 24 MPa peak cylinder pressure. Water cooling is eliminated by selective oil cooling of the components. A high temperature lubricant will be required due to increased in-cylinder operating temperatures. A two-stage turbocharger air system with intercooling and aftercooling was selected to meet engine boost and BMEP requirements. A turbocompound turbine stage is incorporated for exhaust energy recovery. The concept engine cost was estimated to be 43 percent higher compared to a Caterpillar 3176 engine. The higher initial engine cost is predicted to be offset by reduced operating costs due the lower fuel consumption.

Application of the Modular Automated Reconfigurable Assembly System (MARAS) concept to adaptable vision gauging and parts feeding

NASA Technical Reports Server (NTRS)

By, Andre Bernard; Caron, Ken; Rothenberg, Michael; Sales, Vic

1994-01-01

This paper presents the first phase results of a collaborative effort between university researchers and a flexible assembly systems integrator to implement a comprehensive modular approach to flexible assembly automation. This approach, named MARAS (Modular Automated Reconfigurable Assembly System), has been structured to support multiple levels of modularity in terms of both physical components and system control functions. The initial focus of the MARAS development has been on parts gauging and feeding operations for cylinder lock assembly. This phase is nearing completion and has resulted in the development of a highly configurable system for vision gauging functions on a wide range of small components (2 mm to 100 mm in size). The reconfigurable concepts implemented in this adaptive Vision Gauging Module (VGM) are now being extended to applicable aspects of the singulating, selecting, and orienting functions required for the flexible feeding of similar mechanical components and assemblies.

The Concept of Noise Annoyance: how International Experts See it

NASA Astrophysics Data System (ADS)

Guski, R.; Felscher-Suhr, U.; Schuemer, R.

1999-06-01

The first part of this paper is a review of some definitions of noise annoyance which have been used explicitly or implicitly in major files and laboratory studies in different countries. This analysis shows wide differences. For instance, in some cases annoyance is seen as an outcome of disturbances, in other cases it is seen as an indication of the degree of helplessness with respect to the noise source. The second part is a report of an empirical study in which 68 noise research experts from seven different nations were asked (1) to indicate the main effect of noise, and (2) to rate the similarity between the concept “noise annoyance” and several related concepts. It turned out that (1) noise annoyance is seen as the major effect of noise, (2) that noise annoyance is a multi-faceted psychological concept, including behavioral, and evaluative aspects. Also, (3) the two aspects rated highest in similarity to annoyance are “nuisance” and “disturbance”, (4) although noise annoyance must be related to acoustic variables, acoustic characteristics do not play an overwhelming role in the concept of annoyance and (5) although experts from different languages agree upon the main components of the annoyance concept (e.g., nuisance, disturbance, and unpleasantness), there are some significant differences in the weights English, German, and Japanese speaking experts assign to several components (e.g., to nuisance, interference, irritation, and vexation). Whether these different weights are due to different concepts of annoyance, or due to different connotations of the related words in the respective languages, could not be analyzed with the data at hand.

Two-phase strategy of neural control for planar reaching movements: II--relation to spatiotemporal characteristics of movement trajectory.

PubMed

Rand, Miya K; Shimansky, Yury P

2013-09-01

In the companion paper utilizing a quantitative model of optimal motor coordination (Part I, Rand and Shimansky, in Exp Brain Res 225:55-73, 2013), we examined coordination between X and Y movement directions (XYC) during reaching movements performed under three prescribed speeds, two movement amplitudes, and two target sizes. The obtained results indicated that the central nervous system (CNS) utilizes a two-phase strategy, where the initial and the final phases correspond to lower and higher precision of information processing, respectively, for controlling goal-directed reach-type movements to optimize the total cost of task performance including the cost of neural computations. The present study investigates how two different well-known concepts used for describing movement performance relate to the concepts of optimal XYC and two-phase control strategy. First, it is examined to what extent XYC is equivalent to movement trajectory straightness. The data analysis results show that the variability, the movement trajectory's deviation from the straight line, increases with an increase in prescribed movement speed. In contrast, the dependence of XYC strength on movement speed is opposite (in total agreement with an assumption of task performance optimality), suggesting that XYC is a feature of much higher level of generality than trajectory straightness. Second, it is tested how well the ballistic and the corrective components described in the traditional concept of two-component model of movement performance match with the initial and the final phase of the two-phase control strategy, respectively. In fast reaching movements, the percentage of trials with secondary corrective submovement was smaller under larger-target shorter-distance conditions. In slower reaching movements, meaningful parsing was impossible due to massive fluctuations in the kinematic profile throughout the movement. Thus, the parsing points determined by the conventional submovement analysis did not consistently reflect separation between the ballistic and error-corrective components. In contrast to the traditional concept of two-component movement performance, the concept of two-phase control strategy is applicable to a wide variety of experimental conditions.

Microgenerateurs electriques a base d'oscillateurs thermiques

NASA Astrophysics Data System (ADS)

Leveille, Etienne

Dans un contexte de developpement durable et d'automatisation de notre environnement, l'utilisation de capteurs sans-fil distribues est croissante. Hors l'usage et le remplacement de piles s'avere couteux. La consommation energetique de plus en plus faible de l'electronique rend l'extraction energetique de l'energie ambiante envisageable. La chaleur residuelle est une source d'energie interessante puisqu'elle est la forme finale de la majeure partie de l'energie utilisee par l'humain. Cependant, a petite echelle, seuls les elements thermoelectriques sont disponibles. Les presents travaux s'interessent donc a explorer et comparer des mecanismes de generation alternatifs. Puisque la majorite des mecanismes de transduction alternatifs sont dynamiques, leur utilisation requiert une transformation de l'energie thermique continue en oscillations. Les mecanismes etudies ont donc tous en commun de posseder un oscillateur thermique en plus d'un mecanisme de transduction vers la forme d'energie electrique. Parmi les divers mecanismes identifies, deux sont etudies en details pour comprendre leurs comportements ainsi que connaitre leur efficacite et leur puissance potentielle. Le premier generateur etudie theoriquement est base sur le changement de ferromagnetisme d'une masse suspendue par des ressorts au-dessus d'un aimant. Les comportements du modele developpe correspondent aux comportements reportes dans la litterature. Deux parametres de conception principaux ont ete identifies, permettant un controle de la frequence, de la plage de temperatures d'operation. De plus le mecanisme peut operer avec de faibles differences de temperature et des temperatures proches de l'ambiant, ouvrant la porte a des applications utilisant la chaleur du corps humain. L'utilisation de materiau pyroelectrique comme mecanisme de transduction pourrait offrir des densites de puissance electrique envisageables de l'ordre de 1mW/cm3. Le second generateur etudie experimentalement est base sur l'evaporation explosive d'un liquide surchauffe en absence de sites de nucleation. Un premier prototype a permis de demontrer, pour la premiere fois, le fonctionnement d'un tel cycle. Une etude de l'effet de la temperature de la source de chaleur et de l'effet du debit de liquide montre qu'une zone d'operation ideale est presente. La puissance de sortie maximale mesuree est de l'ordre de 1.6muW. Des ameliorations sont proposees pour faire croitre cette puissance de deux ordres de grandeur. Finalement, l'utilisation du pompage capillaire pour rendre le systeme autonome est demontre, mais reste sensible aux variations de conditions. Finalement, l'etude des dispositifs montre que les microgenerateurs a base d'oscillateurs thermiques peuvent presenter un interet, par rapport aux elements thermoelectriques, dans les applications ou les temperatures sont faibles ou incertaines. Cependant, ces mecanismes souffrent d'une tres faible efficacite causee par les multiples transformations energetiques a faible couplage. Mots-cles : microgenerateur, oscillateur thermique, cycle thermodynamique, thermoelectricite, microsystemes electromecaniques, MEMS

Social Accountable Medical Education: A concept analysis.

PubMed

Abdolmaleki, Mohammadreza; Yazdani, Shahram; Momeni, Sedigheh; Momtazmanesh, Nader

2017-07-01

Considering the pervasiveness of social accountable medical education concept around the world and the growing trend of literature in this regard as well as various interpretations made about this concept, we found it necessary to analyze the concept of social accountable medical education. In this study, the modified version of McKenna's approach to concept analysis was used to determine the concept, explain structures and substructures and determine the border concepts neighboring and against social accountability in medical education. By studying the selected sources,the components of the concept were obtained to identify it and express an analytic definition of social accountability in medical education system. Then, a model case with all attributes of the given concept and the contrary and related concepts were mentioned to determine the boundary between the main concept and auxiliary ones. According to the results of this study in the field of social accountability, the detailed and transparent analytical definition of social accountable medical education can be used in future studies as well as the function and evaluation of medical education system.

Social Accountable Medical Education: A concept analysis

PubMed Central

ABDOLMALEKI, MOHAMMADREZA; YAZDANI, SHAHRAM; MOMENI, SEDIGHEH; MOMTAZMANESH, NADER

2017-01-01

Introduction: Considering the pervasiveness of social accountable medical education concept around the world and the growing trend of literature in this regard as well as various interpretations made about this concept, we found it necessary to analyze the concept of social accountable medical education. Methods: In this study, the modified version of McKenna’s approach to concept analysis was used to determine the concept, explain structures and substructures and determine the border concepts neighboring and against social accountability in medical education. Results: By studying the selected sources,the components of the concept were obtained to identify it and express an analytic definition of social accountability in medical education system. Then, a model case with all attributes of the given concept and the contrary and related concepts were mentioned to determine the boundary between the main concept and auxiliary ones. Conclusion: According to the results of this study in the field of social accountability, the detailed and transparent analytical definition of social accountable medical education can be used in future studies as well as the function and evaluation of medical education system. PMID:28761884

Supersonic Retropropulsion Flight Test Concepts

NASA Technical Reports Server (NTRS)

Post, Ethan A.; Dupzyk, Ian C.; Korzun, Ashley M.; Dyakonov, Artem A.; Tanimoto, Rebekah L.; Edquist, Karl T.

2011-01-01

NASA's Exploration Technology Development and Demonstration Program has proposed plans for a series of three sub-scale flight tests at Earth for supersonic retropropulsion, a candidate decelerator technology for future, high-mass Mars missions. The first flight test in this series is intended to be a proof-of-concept test, demonstrating successful initiation and operation of supersonic retropropulsion at conditions that replicate the relevant physics of the aerodynamic-propulsive interactions expected in flight. Five sub-scale flight test article concepts, each designed for launch on sounding rockets, have been developed in consideration of this proof-of-concept flight test. Commercial, off-the-shelf components are utilized as much as possible in each concept. The design merits of the concepts are compared along with their predicted performance for a baseline trajectory. The results of a packaging study and performance-based trade studies indicate that a sounding rocket is a viable launch platform for this proof-of-concept test of supersonic retropropulsion.

Reuse of assembly systems: a great ecological and economical potential for facility suppliers

NASA Astrophysics Data System (ADS)

Weule, Hartmut; Buchholz, Carsten

2001-02-01

In addition to the consumer goods, capital goods offer a great potential for ecological and economic optimization. In view of this fact the project WiMonDi (Re-Use of Assembly Systems as new Business Fields), started in September 1998, focuses a marketable Remanufacturing and Re-Use of modules and components of assembly systems by using technically and organizationally continuous concepts. The objective of the closed Facility-Management-System is to prolong the serviceable lifespan of assembly facilities through the organized dismantling, refurbishment and reconditioning of the assembly facilities as well as their components. Therefore, it is necessary to develop easible and methodical strategies to realize a workable Re-Use concept. Within the project the focus is based on the optimization of Re-Use-strategies - the direct Re-Use, the Re-Use including Refurbishment as well as Material Recycling. The decision for an optimal strategy depends on economical (e.g. residual value, cost/benefit of relevant processes, etc.), ecological (e.g. pollutant components /substances), etc.) and technical parameters (e.g. reliability, etc.). For the purpose to integrate the total cost-of-ownership of products or components, WiMonDi integrates the costs of the use of products as well as the Re-Use costs/benefits. To initiate the conception of new distribution and user models between the supplier and the user of assembly facilities the described approach is conducted in close cooperation between Industry and University.

Polder 2 in-flight results and parasol perspectives

NASA Astrophysics Data System (ADS)

Bermudo, F.; Fougnie, B.; Bret-Dibat, T.

2017-11-01

This paper presents a global approach of the POLDER 2 mission: from instrument design, pre-flight and inflight calibrations till the first in-flight results. The POLDER 2 sensor has been developed by the Centre National d'Etudes Spatiales, the French space agency. It is part of the payload of the ADEOS II satellite developed by JAXA and launched in December 2002. POLDER 2 collected global data from April 2003, end of ADEOS II system check out phase, till the loss of the satellite on October 2003 due to a failure of the satellite power supply system. The POLDER 2 sensor is designed to collect global and repetitive observations of the solar radiation reflected by the Earth-Atmosphere system for climate research. The sensor is a wide field-of-view (2400 Km swath), low resolution (6x7 Km² at nadir) multi-spectral imaging radiometer / polarimeter. The instrument concept is based on a telecentric optics, a rotating wheel carrying 15 spectral filters and polarizers, and a bidimensionnal CCD detector array. The multidisciplinary scientific objectives of POLDER 2 lead to severe radiometric and geometrical requirements, as well as a very accurate calibration of the sensor. These requirements are achieved through a stable instrument design, exhaustive pre-flight and original in-flight calibrations. A derived model of POLDER 2 instrument will be flown on the payload of the CNES PARASOL micro satellite, the launch of which is planned end 2004. The PARASOL mission is part of the "Aqua train" i.e. the formation flying of 3 satellites following EOS-PM, so called "Aqua".

Caracterisation des proprietes dielectriques de materiaux composites a base de polyethylene terephtalate recycle =

NASA Astrophysics Data System (ADS)

Mebarki, Fouzia

Cette etude vise a etudier la possibilite d'utiliser des materiaux composites a matrice thermoplastique pour des applications electriques comme les supports des systemes d'allumage dans les moteurs d'automobile. Nous nous interessons plus particulierement aux composites a base de polyethylene terephtalate (PET) recycle. Les isolants classiques comme le PET ne peuvent pas satisfaire toutes les exigences. L'introduction des renforts comme les fibres de verre et le mica peuvent ameliorer les caracteristiques mecaniques de ces materiaux. Toutefois, cette amelioration peut etre accompagnee d'une diminution des proprietes electriques surtout que ces materiaux doivent operer sous contraintes thermiques et electriques tres severes. Afin d'estimer la duree de vie de ces isolants, des essais de vieillissement accelere ont ete effectues a une frequence de 300Hz dans une plage de temperature allant de la temperature ambiante a 140°C. L'etude a haute temperature permettra de determiner la temperature de service des materiaux candidats. Des essais de la rupture dielectrique ont ete realises sur un grand nombre d'echantillon selon la norme ASTM D-149 relative aux mesures de rigidite dielectrique des isolants solides. Ces tests ont permis de deceler les echantillons problematiques et de verifier la qualite de ces isolants solides. Les differentes connaissances acquises lors de cette analyse ont servi a predire les performances des materiaux en service et vont permettre a la compagnie Groupe Lavergne d'apporter des ameliorations au niveau des formulations existantes et par la suite developper un materiau ayant les proprietes electriques et thermiques adequates pour ce type d'application. None None None None

Analysis of a human phenomenon: self-concept.

PubMed

LeMone, P

1991-01-01

This analysis of self-concept includes an examination of definitions, historical perspectives, theoretical basis, and closely related terms. Antecedents, consequences, defining attributes, and a definition were formulated based on the analysis. The purpose of the analysis was to provide support for the use of the label "self-concept" as a broad category that encompasses the self-esteem, identity, and body-image nursing diagnoses within Taxonomy I. This classification could allow the use of a broad diagnostic label to better describe conditions that necessitate nursing care. It may also further explain the relationships between and among those diagnoses that describe human responses to disturbance of any component of the self-concept.

Design concepts for low-cost composite engine frames

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1983-01-01

Design concepts for low-cost, lightweight composite engine frames were applied to the design requirements for the frame of commercial, high-bypass turbine engines. The concepts consist of generic-type components and subcomponents that could be adapted for use in different locations in the engine and to different engine sizes. A variety of materials and manufacturing methods were assessed with a goal of having the lowest number of parts possible at the lowest possible cost. The evaluation of the design concepts resulted in the identification of a hybrid composite frame which would weigh about 70 percent of the state-of-the-art metal frame and cost would be about 60 percent.

Evaluation of laminar flow control system concepts for subsonic commercial transport aircraft

NASA Technical Reports Server (NTRS)

1978-01-01

A two-year study conducted to establish a basis for industry decisions on the application of laminar flow control (LFC) to future commercial transports was presented. Areas of investigation included: (1) mission definition and baseline selection; (2) concepts evaluations; and (3) LFC transport configuration selection and component design. The development and evaluation of competing design concepts was conducted in the areas of aerodynamics, structures and materials, and systems. The results of supporting wind tunnel and laboratory testing on a full-scale LFC wing panel, suction surface opening concepts and structural samples were included. A final LFC transport was configured in incorporating the results of concept evaluation studies and potential performance improvements were assessed. Remaining problems together with recommendations for future research are discussed.

Lightwave technology in microwave systems

NASA Astrophysics Data System (ADS)

Popa, A. E.; Gee, C. M.; Yen, H. W.

1986-01-01

Many advanced microwave system concepts such as active aperture phased array antennas use distributed topologies in which lightwave circuits are being proposed to interconnect both the analog and digital modules of the system. Lightwave components designed to implement these interconnects are reviewed and their performance analyzed. The impact of trends in component development are discussed.

Triple Helix Systems: An Analytical Framework for Innovation Policy and Practice in the Knowledge Society

ERIC Educational Resources Information Center

Ranga, Marina; Etzkowitz, Henry

2013-01-01

This paper introduces the concept of Triple Helix systems as an analytical construct that synthesizes the key features of university--industry--government (Triple Helix) interactions into an "innovation system" format, defined according to systems theory as a set of components, relationships and functions. Among the components of Triple…

Fabricating a Microcomputer on a Single Silicon Wafer

NASA Technical Reports Server (NTRS)

Evanchuk, V. L.

1983-01-01

Concept for "microcomputer on a slice" reduces microcomputer costs by eliminating scribing, wiring, and packaging of individual circuit chips. Low-cost microcomputer on silicon slice contains redundant components. All components-central processing unit, input/output circuitry, read-only memory, and random-access memory (CPU, I/O, ROM, and RAM) on placed on single silicon wafer.

An Inservice Program for Elementary Teachers: Components, Instructional Procedures, and Evaluation.

ERIC Educational Resources Information Center

Horak, Willis J.; And Others

A description and evaluation of a year-long science in-service program for elementary teachers is provided. Consisting of three components, the program was designed to expand teachers' understandings of physics and chemistry concepts and processes and to encourage more science teaching and science activities in their classrooms. The on-campus…

Heritability construction for provenance and family selection

Treesearch

Fan H. Kung; Calvin F. Bey

1977-01-01

Concepts and procedures for heritability estimations through the variance components and the unified F-statistics approach are described. The variance components approach is illustrated by five possible family selection schemes within a diallel mating test, while the unified F-statistics approach is demonstrated by a geographic variation study. In a balance design, the...

A new multicriteria risk mapping approach based on a multiattribute frontier concept

Treesearch

Denys Yemshanov; Frank H. Koch; Yakov Ben-Haim; Marla Downing; Frank Sapio; Marty Siltanen

2013-01-01

Invasive species risk maps provide broad guidance on where to allocate resources for pest monitoring and regulation, but they often present individual risk components (such as climatic suitability, host abundance, or introduction potential) as independent entities. These independent risk components are integrated using various multicriteria analysis techniques that...

Identifying knowledge gaps between practice and research for implementation components of sustainable interventions to improve the working environment - A rapid review.

PubMed

Rasmussen, Charlotte Diana Nørregaard; Højberg, Helene; Bengtsen, Elizabeth; Jørgensen, Marie Birk

2018-02-01

In a recent study, we involved all relevant stakeholders to identify practice-based implementation components for successful implementation and sustainability in work environment interventions. To understand possible knowledge gaps between evidence and practice, the aim of this paper is to investigate if effectiveness studies of the 11 practice-based implementation components can be identified in existing scientific literature. PubMed/MEDLINE, PsycINFO, and Web of Science were searched for relevant studies. After screening, 38 articles met the inclusion criteria. Since some of the studies describe more than one practice-based implementation concept a total of 125 quality criteria assessments were made. The overall result is that 10 of the 11 practice-based implementation components can be found in the scientific literature, but the evaluation of them is poor. From this review it is clear that there are knowledge gaps between evidence and practice with respect to the effectiveness of implementation concepts. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Intelligent Engine Systems: Thermal Management and Advanced Cooling

NASA Technical Reports Server (NTRS)

Bergholz, Robert

2008-01-01

The objective of the Advanced Turbine Cooling and Thermal Management program is to develop intelligent control and distribution methods for turbine cooling, while achieving a reduction in total cooling flow and assuring acceptable turbine component safety and reliability. The program also will develop embedded sensor technologies and cooling system models for real-time engine diagnostics and health management. Both active and passive control strategies will be investigated that include the capability of intelligent modulation of flow quantities, pressures, and temperatures both within the supply system and at the turbine component level. Thermal management system concepts were studied, with a goal of reducing HPT blade cooling air supply temperature. An assessment will be made of the use of this air by the active clearance control system as well. Turbine component cooling designs incorporating advanced, high-effectiveness cooling features, will be evaluated. Turbine cooling flow control concepts will be studied at the cooling system level and the component level. Specific cooling features or sub-elements of an advanced HPT blade cooling design will be downselected for core fabrication and casting demonstrations.

Solid Modeling of Crew Exploration Vehicle Structure Concepts for Mass Optimization

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

2006-01-01

Parametric solid and surface models of the crew exploration vehicle (CEV) command module (CM) structure concepts are developed for rapid finite element analyses, structural sizing and estimation of optimal structural mass. The effects of the structural configuration and critical design parameters on the stress distribution are visualized, examined to arrive at an efficient design. The CM structural components consisted of the outer heat shield, inner pressurized crew cabin, ring bulkhead and spars. For this study only the internal cabin pressure load case is considered. Component stress, deflection, margins of safety and mass are used as design goodness criteria. The design scenario is explored by changing the component thickness parameters and materials until an acceptable design is achieved. Aluminum alloy, titanium alloy and an advanced composite material properties are considered for the stress analysis and the results are compared as a part of lessons learned and to build up a structural component sizing knowledge base for the future CEV technology support. This independent structural analysis and the design scenario based optimization process may also facilitate better CM structural definition and rapid prototyping.

[Comparative analysis of the efficacy of a playful-narrative program to teach mathematics at pre-school level].

PubMed

Gil Llario, M D; Vicent Catalá, Consuelo

2009-02-01

Comparative analysis of the efficacy of a playful-narrative program to teach mathematics at pre-school level. In this paper, the effectiveness of a programme comprising several components that are meant to consolidate mathematical concepts and abilities at the pre-school level is analyzed. The instructional methodology of this programme is compared to other methodologies. One-hundred 5-6 year-old children made up the sample that was distributed in the following conditions: (1) traditional methodology; (2) methodology with perceptual and manipulative components, and (3) methodology with language and playful components. Mathematical competence was assessed with the Mathematical Criterial Pre-school Test and the subtest of quantitative-numeric concepts of BADyG. Participants were evaluated before and after the academic course during which they followed one of these methodologies. The results show that the programme with language and playful components is more effective than the traditional methodology (p<.000) and also more effective than the perceptual and manipulative methodology (p<.000). Implications of the results for instructional practices are analyzed.

The Role of a Multidimensional Concept of Trust in the Performance of Global Virtual Teams

NASA Technical Reports Server (NTRS)

Bodensteiner, Nan Muir; Stecklein, Jonette M.

2002-01-01

This paper focuses on the concept of trust as an important ingredient of effective global virtual team performance. Definitions of trust and virtual teams are presented. The concept of trust is developed from its unilateral application (trust, absence of trust) to a multidimensional concept including cognitive and affective components. The special challenges of a virtual team are then discussed with particular emphasis on how a multidimensional concept of trust impacts these challenges. Propositions suggesting the multidimensional concept of trust moderates the negative impacts of distance, cross cultural and organizational differences, the effects of electronically mediated communication, reluctance to share information and a lack of hi story/future on the performance of virtual teams are stated. The paper concludes with recommendations and a set of techniques to build both cognitive and affective trust in virtual teams.

The coexistence of alternative and scientific conceptions in physics

NASA Astrophysics Data System (ADS)

Ozdemir, Omer F.

The purpose of this study was to inquire about the simultaneous coexistence of alternative and scientific conceptions in the domain of physics. This study was particularly motivated by several arguments put forward in opposition to the Conceptual Change Model. In the simplest form, these arguments state that people construct different domains of knowledge and different modes of perception in different situations. Therefore, holding different conceptualizations is unavoidable and expecting a replacement in an individual's conceptual structure is not plausible in terms of instructional practices. The following research questions were generated to inquire about this argument: (1) Do individuals keep their alternative conceptions after they have acquired scientific conceptions? (2) Assuming that individuals who acquired scientific conceptions also have alternative conceptions, how are these different conceptions nested in their conceptual structure? (3) What kind of knowledge, skills, and reasoning are necessary to transfer scientific principles instead of alternative ones in the construction of a valid model? Analysis of the data collected from the non-physics group indicated that the nature of alternative conceptions is framed by two types of reasoning: reasoning by mental simulation and semiformal reasoning. Analysis of the data collected from the physics group revealed that mental images or scenes feeding reasoning by mental simulation had not disappeared after the acquisition of scientific conceptions. The analysis of data also provided enough evidence to conclude that alternative principles feeding semiformal reasoning have not necessarily disappeared after the acquisition of scientific conceptions. However, in regard to semiformal reasoning, compartmentalization was not as clear as the case demonstrated in reasoning by mental simulation; instead semiformal and scientific reasoning are intertwined in a way that the components of semiformal reasoning can easily take their place among the components of scientific reasoning. In spite of the fact that the coexistence of multiple conceptions might obstruct the transfer of scientific conceptions in problem-solving situations, several factors stimulating the use of scientific conceptions were noticed explicitly. These factors were categorized as follows: (a) the level of individuals' domain specific knowledge in the corresponding field, (b) the level of individuals' knowledge about the process of science (how science generates its knowledge claims), (c) the level of individuals' awareness of different types of reasoning and conceptions, and (d) the context in which the problem is situated. (Abstract shortened by UMI.)

Identifying the Critical Components for a Conceptual Understanding of the Mole in Secondary Science Classrooms

ERIC Educational Resources Information Center

Fang, Su-Chi; Hart, Christina; Clarke, David

2016-01-01

The amount of substance and its unit the mole is a basic concept in chemistry. However, previous research has shown that teaching and learning the concept are challenging tasks for both teachers and students. The purpose of this study was to pinpoint the problems which emerge in the teaching and learning process, and provide integrated suggestions…

Everything You Always Wanted to Know about Judgment, but Were Afraid to Ask!

ERIC Educational Resources Information Center

Priest, Simon

1990-01-01

Outdoor leaders with sound judgment can gather many specific experiences, induce them into a collection of general concepts, store these as memory maps in the mind, later recall the general concepts as needed, and deduce a specific prediction from them. Proposes that evaluative reflection after a judgment is made is the component missing from most…

The Influence of Engineers' Training Models on Ethics and Civic Education Component in Engineering Courses in Portugal

ERIC Educational Resources Information Center

Monteiro, Fátima; Leite, Carlinda; Rocha, Cristina

2017-01-01

The recognition of the need and importance of including ethical and civic education in engineering courses, as well as the training profile on ethical issues, relies heavily on the engineer's concept and the perception of the engineering action. These views are strongly related to the different engineer education model conceptions and its…

Exploring the Cognitive Loads of High-School Students as They Learn Concepts in Web-Based Environments

ERIC Educational Resources Information Center

Chang, Cheng-Chieh; Yang, Fang-Ying

2010-01-01

This study measured high-school learners' cognitive load as they interacted with different web-based curriculum components, and examined the interactions between cognitive load and web-based concept learning. Participants in this study were 105 11th graders from an academic senior high school in Taiwan. An online, multimedia curriculum on the…

Students' Socioscientific Reasoning and Decision-Making on Energy-Related Issues--Development of a Measurement Instrument

ERIC Educational Resources Information Center

Sakschewski, Mark; Eggert, Sabina; Schneider, Susanne; Bögeholz, Susanne

2014-01-01

The concept of energy is one key component of science education curricula worldwide. While it is still being taught in many science classrooms from a mainly conceptual knowledge perspective, the need to frame the concept of energy as a socioscientific issue and implement it in the context of citizenship education and education for sustainable…

Effects of the Wisconsin Reading Design Comprehension Program on Reading Achievement and Self-Concept of Sixth Grade Students.

ERIC Educational Resources Information Center

Negley, Sandra Anne

The main purpose of this study was to determine and describe the effects of the comprehension component of the criterion-referenced reading program, Wisconsin Design for Reading Skills Development (WDRSD), on reading achievement and self-concept of sixth-grade students. Parametric techniques were employed in a quasi-experimental study involving 44…

Teachers' Conceptions about the Genetic Determinism of Human Behaviour: A Survey in 23 Countries

ERIC Educational Resources Information Center

Castéra, Jérémy; Clément, Pierre

2014-01-01

This work analyses the answers to a questionnaire from 8,285 in-service and pre-service teachers from 23 countries, elaborated by the Biohead-Citizen research project, to investigate teachers' conceptions related to the genetic determinism of human behaviour. A principal components analysis is used to assess the main trends in all the interviewed…

Suggestions for Curriculum Development [And] Handbook High School Grades, Part D, 10-12. Environmental Education Interdependence: A Concept Approach. Revised.

ERIC Educational Resources Information Center

King, David C.; Wood, Jayne Millar

Two booklets comprise the grades 10-12 component of a series of guides for incorporating environmental education into the existing curriculum. The guide and handbook emphasize a multidisciplinary approach, use the concept of interdependence as an organizing theme, and offer suggestions for using the local community as a resource. The guide…

Suggestions for Curriculum Development [And] Handbook, Part C, 7-9. Environmental Education Interdependence: A Concept Approach. Revised.

ERIC Educational Resources Information Center

King, David C.; Stillman, Peter R.

Two booklets, a guide and a handbook, comprise the grades 7-9 component of a series of guides for incorporating environmental education into the existing curriculum. The materials emphasize a multidisciplinary approach, use the concept of interdependence as an organizing theme, and offer suggestions for using the local community as a resource.…

Working Time and the Volume of Work in Germany: The IAB Concept of Measurement. IAB Labour Market Research Topics.

ERIC Educational Resources Information Center

Bach, Hans-Uwe; Koch, Susanne

The Institut fuer Arbeitsmarkt- und Berufsforschung (IAB) or Institute for Employment Research has developed a detailed working time and volume of work measurement concept in order to more comprehensively assess the demand for labor. The individual components of working time in Germany are obtained from various data sources and combined to form…

Flight service evaluation of an advanced composite empennage component on commercial transport aircraft

NASA Technical Reports Server (NTRS)

1976-01-01

The development and flight evaluation of an advanced composite empennage component is presented. The recommended concept for the covers is graphite-epoxy hats bonded to a graphite-epoxy skin. The hat flare-out has been eliminated, instead the hat is continuous into the joint. The recommended concept for the spars is graphite-epoxy caps and a hybrid of Kevlar-49 and graphite-epoxy in the spar web. The spar cap, spar web stiffeners for attaching the ribs, and intermediate stiffeners are planned to be fabricated as a unit. Access hole in the web will be reinforced with a donut type, zero degree graphite-epoxy wound reinforcement. The miniwich design concept in the upper three ribs originally proposed is changed to a graphite-epoxy stiffened solid laminate design concept. The recommended configuration for the lower seven ribs remains as graphite-epoxy caps with aluminum cruciform diagonals. The indicated weight saving for the current advanced composite vertical fin configuration is 20.2% including a 24 lb growth allowance. The project production cost saving is approximately 1% based on a cumulative average of 250 aircraft and including only material, production labor, and quality assurance costs.

Empowerment of family caregivers of adults and elderly persons: A concept analysis.

PubMed

Sakanashi, Sayori; Fujita, Kimie

2017-10-01

This concept analysis defined and described the components of empowerment of family caregivers who care for adults and the elderly. Rodgers evolutionary method of concept analysis was used. Data sources included Pub Med, CINAHL, Scopus, and Igaku Chuo Zasshi. Thirty articles published between 1995 and 2015 focusing on the empowerment of family caregivers providing care to adults and the elderly were selected. The analysis reveals 6 attributes, 5 antecedents, and 5 consequences. In addition, the results reveal structured aspects of family caregivers, care receivers, and other people surrounding them, and their relationships. Empowerment of adults' and elders' family caregivers may be defined as "positive control of one's mind and body, cultivating a positive attitude, proactively attempting to understand one's role as a caregiver to improve caregiving capabilities, focusing on others as well as oneself, supporting the independence of the care receiver, and creating constructive relationships with other people surrounding them." The components of empowerment clarified in this research can be used for the measurement of and interventions aimed at improving empowerment among family caregivers. Furthermore, clarifying the definition of empowerment among family caregivers enables researchers to better distinguish empowerment from similar concepts in the future. © 2017 John Wiley & Sons Australia, Ltd.

Identification of Increasing Green Behaviour in Citraland Bagya City, Medan

NASA Astrophysics Data System (ADS)

Aulia, D. N.; Marpaung, B. O. Y.; Suryani, L.

2017-03-01

This present time, Indonesia just began applying the concept of Green Architecture. The actions require community participation as residents and the users of the building. The built environment is designed around the idea of Green Architecture but inhabited and managed improperly; the goal of sustainable built environment is not achieved. The aspect of behaviour is the key factor in the implementation of Green Architecture’s concept. This research is a descriptive exploratory which is to identify the problems to the implementation of Green Architecture’s concept in planned housing. Then the study will explore the components causes of the problems used as a problem solver. The study conducted on the living behaviour in Citraland Bagya City’s resident. The estate is designed and built with the concept of Green Architecture in Medan city. The research was carried out by the four aspects of housing are the physical, social and cultural, policy, and management issue. These three components will indirectly relate to the economic issues that are the efficiency and effectiveness of living behaviour. The results showed that the increasing of green behavior is still small and the occupant requires motivation and socialization of living green.

A Linguistic Model in Component Oriented Programming

NASA Astrophysics Data System (ADS)

Crăciunean, Daniel Cristian; Crăciunean, Vasile

2016-12-01

It is a fact that the component-oriented programming, well organized, can bring a large increase in efficiency in the development of large software systems. This paper proposes a model for building software systems by assembling components that can operate independently of each other. The model is based on a computing environment that runs parallel and distributed applications. This paper introduces concepts as: abstract aggregation scheme and aggregation application. Basically, an aggregation application is an application that is obtained by combining corresponding components. In our model an aggregation application is a word in a language.

L'etude de l'InP et du GaP suite a l'implantation ionique de Mn et a un recuit thermique

NASA Astrophysics Data System (ADS)

Bucsa, Ioan Gigel

Cette these est dediee a l'etude des materiaux InMnP et GaMnP fabriques par implantation ionique et recuit thermique. Plus precisement nous avons investigue la possibilite de former par implantation ionique des materiaux homogenes (alliages) de InMnP et GaMnP contenant de 1 a 5 % atomiques de Mn qui seraient en etat ferromagnetique, pour des possibles applications dans la spintronique. Dans un premier chapitre introductif nous donnons les motivations de cette recherche et faisons une revue de la litterature sur ce sujet. Le deuxieme chapitre decrit les principes de l'implantation ionique, qui est la technique utilisee pour la fabrication des echantillons. Les effets de l'energie, fluence et direction du faisceau ionique sur le profil d'implantation et la formation des dommages seront mis en evidence. Aussi dans ce chapitre nous allons trouver des informations sur les substrats utilises pour l'implantation. Les techniques experimentales utilisees pour la caracterisation structurale, chimique et magnetique des echantillons, ainsi que leurs limitations sont presentees dans le troisieme chapitre. Quelques principes theoriques du magnetisme necessaires pour la comprehension des mesures magnetiques se retrouvent dans le chapitre 4. Le cinquieme chapitre est dedie a l'etude de la morphologie et des proprietes magnetiques des substrats utilises pour implantation et le sixieme chapitre, a l'etude des echantillons implantes au Mn sans avoir subi un recuit thermique. Notamment nous allons voir dans ce chapitre que l'implantation de Mn a plus que 1016 ions/cm 2 amorphise la partie implantee du materiau et le Mn implante se dispose en profondeur sur un profil gaussien. De point de vue magnetique les atomes implantes se trouvent dans un etat paramagnetique entre 5 et 300 K ayant le spin 5/2. Dans le chapitre 7 nous presentons les proprietes des echantillons recuits a basses temperatures. Nous allons voir que dans ces echantillons la couche implantee est polycristalline et les atomes de Mn sont toujours dans un etat paramagnetique. Dans les chapitres 8 et 9, qui sont les plus volumineux, nous presentons les resultats des mesures sur les echantillons recuits a hautes temperatures: il s'agit d'InP et du GaP implantes au Mn, dans le chapitre 8 et d'InP co-implante au Mn et au P, dans le chapitre 9. D'abord, dans le chapitre 8 nous allons voir que le recuit a hautes temperatures mene a une recristallisation epitaxiale du InMnP et du GaMnP; aussi la majorite des atomes de Mn se deplacent vers la surface a cause d'un effet de segregation. Dans les regions de la surface, concentres en Mn, les mesures XRD et TEM identifient la formation de MnP et d'In cristallin. Les mesures magnetiques identifient aussi la presence de MnP ferromagnetique. De plus dans ces mesures on trouve qu'environ 60 % du Mn implante est en etat paramagnetique avec la valeur du spin reduite par rapport a celle trouvee dans les echantillons non-recuits. Dans les echantillons InP co-implantes au Mn et au P la recristallisation est seulement partielle mais l'effet de segregation du Mn a la surface est beaucoup reduit. Dans ce cas plus que 50 % du Mn forme des particules MnP et le restant est en etat paramagnetique au spin 5/2, dilue dans la matrice de l'InP. Finalement dans le dernier chapitre, 10, nous presentons les conclusions principales auxquels nous sommes arrives et discutons les resultats et leurs implications. Mots cles: implantation ionique, InP, GaP, amorphisation, MnP, segregation, co-implantation, couche polycristalline, paramagnetisme, ferromagnetisme.

Mapping the Mayo-Portland adaptability inventory to the international classification of functioning, disability and health.

PubMed

Lexell, Jan; Malec, James F; Jacobsson, Lars J

2012-01-01

To examine the contents of the Mayo-Portland Adaptability Inventory (MPAI-4) by mapping it to the International Classification of Functioning, Disability and Health (ICF). Each of the 30 scoreable items in the MPAI-4 was mapped to the most precise ICF categories. All 30 items could be mapped to components and categories in the ICF. A total of 88 meaningful concepts were identified. There were, on average, 2.9 meaningful concepts per item, and 65% of all concepts could be mapped. Items in the Ability and Adjustment subscales mapped to categories in both the Body Functions and Activity/Participation components of the ICF, whereas all except 1 in the Participation subscale were to categories in the Activity/Participation component. The items could also be mapped to 34 (13%) of the 258 Environmental Factors in the ICF. This mapping provides better definition through more concrete examples (as listed in the ICF) of the types of body functions, activities, and participation indicators that are represented by the 30 scoreable MPAI-4 items. This may assist users throughout the world in understanding the intent of each item, and support further development and the possibility to report results in the form of an ICF categorical profile, making it universally interpretable.

The CF6 engine performance improvement

NASA Technical Reports Server (NTRS)

Fasching, W. A.

1982-01-01

As part of the NASA-sponsored Engine Component Improvement (ECI) Program, a feasibility analysis of performance improvement and retention concepts for the CF6-6 and CF6-50 engines was conducted and seven concepts were identified for development and ground testing: new fan, new front mount, high pressure turbine aerodynamic performance improvement, high pressure turbine roundness, high pressure turbine active clearance control, low pressure turbine active clearance control, and short core exhaust nozzle. The development work and ground testing are summarized, and the major test results and an enomic analysis for each concept are presented.

A feasibility study: California Department of Forestry and Fire Protection utilization of infrared technologies for wildland fire suppression and management

NASA Technical Reports Server (NTRS)

Nichols, J. D.; Britten, R. A.; Parks, G. S.; Voss, J. M.

1990-01-01

NASA's JPL has completed a feasibility study using infrared technologies for wildland fire suppression and management. The study surveyed user needs, examined available technologies, matched the user needs with technologies, and defined an integrated infrared wildland fire mapping concept system configuration. System component trade-offs were presented for evaluation in the concept system configuration. The economic benefits of using infrared technologies in fire suppression and management were examined. Follow-on concept system configuration development and implementation were proposed.

Feasibility study of a pressure-fed engine for a water recoverable space shuttle booster. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1972-01-01

The activities leading to a tentative concept selection for a pressure-fed engine and propulsion support are outlined. Multiple engine concepts were evaluted through parallel engine major component and system analyses. Booster vehicle coordination, tradeoffs, and technology/development aspects are included. The concept selected for further evaluation has a regeneratively cooled combustion chamber and nozzle in conjuction with an impinging element injector. The propellants chosen are LOX/RP-1, and combustion stabilizing baffles are used to assure dynamic combustion stability.

The importance of time cost in pricing outpatient care.

PubMed

Heshmat, S

1988-01-01

The purpose of this article is to discuss the component of the full price charged to patients using outpatient care. The full price of a visit to a physician is equal to out-of-pocket payment (money price), and time costs. In particular, the article discusses the concept of time price (marginal value of time for a patient), and presents a specific example to illustrate the concept of time price elasticity. The concepts and information presented in this article can help marketing managers in setting pricing strategy that would explicitly consider time price.

Fallback level concepts for conventional and by-wire automotive brake systems

NASA Astrophysics Data System (ADS)

Retzer, H.; Mishra, R.; Ball, A.; Schmidt, K.

2012-05-01

Brake-by-wire represents the replacement of traditional brake components such as pumps, hoses, fluids, brake boosters, and master cylinders by electronic sensors and actuators. The different design of these brake concepts poses new challenges for the automotive industry with regard to availability and fallback levels in comparison to standard conventional brake systems. This contribution focuses on the development of appropriate fallback level concepts. Hardware-in-the-loop (HIL) techniques and field trials will be used to investigate the performance and the usability of such systems.

Familial Transmission of Educational Plans and the Academic Self-Concept: A Three-Generation Longitudinal Study

PubMed Central

Mortimer, Jeylan T.; Zhang, Lei; Wu, Chen-Yu; Hussemann, Jeanette; Johnson, Monica Kirkpatrick

2016-01-01

This research investigates the social reproduction of inequality by drawing on prospective longitudinal data from three generations of Youth Development Study respondents. It examines intergenerational influence on the relatively unexplored academic self-concept as well as educational plans, a critical component of the status attainment model. A structural equation model, based on 422 3-generation triads, finds evidence that the sources giving rise to the development of children’s (Generation 3) achievement orientations do not only result from parental (G2) contemporaneous influence. Prior influences implicate grandparent (G1) educational attainment and income, grandparental expectations for the G2 adolescent, the G2 academic self-concept and educational plans measured more than twenty years earlier (in G2’s adolescence), and G2 educational attainment. A familial culture emphasizing academic self-confidence and high educational expectations may be an important component of “family capital” that supports educational attainment and contributes to the maintenance of social class position in each successive generation. PMID:28396611

Tailoring the Employment of Offshore Wind Turbine Support Structure Load Mitigation Controllers

NASA Astrophysics Data System (ADS)

Shrestha, Binita; Kühn, Martin

2016-09-01

The currently available control concepts to mitigate aerodynamic and hydrodynamic induced support structure loads reduce either fore-aft or side-to-side damage under certain operational conditions. The load reduction is achieved together with an increase in loads in other components of the turbine e.g. pitch actuators or drive train, increasing the risk of unscheduled maintenance. The main objective of this paper is to demonstrate a methodology for reduction of support structure damage equivalent loads (DEL) in fore-aft and side-to-side directions using already available control concepts. A multi-objective optimization problem is formulated to minimize the DELs, while limiting the collateral effects of the control algorithms for load reduction. The optimization gives trigger values of sea state condition for the activation or deactivation of certain control concepts. As a result, by accepting the consumption of a small fraction of the load reserve in the design load envelope of other turbine components, a considerable reduction of the support structure loads is facilitated.

Active heat exchange system development for latent heat thermal energy storage

NASA Technical Reports Server (NTRS)

Lefrois, R. T.; Mathur, A. K.

1980-01-01

Five tasks to select, design, fabricate, test and evaluate candidate active heat exchanger modules for future applications to solar and conventional utility power plants were discussed. Alternative mechanizations of active heat exchange concepts were analyzed for use with heat of fusion phase change materials (PCMs) in the temperature range of 250 to 350 C. Twenty-six heat exchange concepts were reviewed, and eight were selected for detailed assessment. Two candidates were selected for small-scale experimentation: a coated tube and shell heat exchanger and a direct contact reflux boiler. A dilute eutectic mixture of sodium nitrate and sodium hydroxide was selected as the PCM from over 50 candidate inorganic salt mixtures. Based on a salt screening process, eight major component salts were selected initially for further evaluation. The most attractive major components in the temperature range of 250 to 350 C appeared to be NaNO3, NaNO2, and NaOH. Sketches of the two active heat exchange concepts selected for test are given.

Next Generation Car — Example of Function Integration at the Light Urban Vehicle (LUV) Vehicle Concept

NASA Astrophysics Data System (ADS)

Kopp, G.; Brückmann, S.; Kriescher, M.; Friedrich, H. E.

In times of climate change vehicle emissions have to be reduced clearly. One possibility is to reduce the mass of the body in white using lightweight sandwich structures. The department `Lightweight and Hybrid Design Methods' of the Institute of Vehicle Concepts develops a vehicle body structure by using sandwiches with aluminum top layers and polyurethane foam as core material. For that the foam and the sandwiches were investigated under different load cases, e.g. pressure loading and in-plane tests. In tests with components the high potential of the sandwich materials were shown. On the dynamic component test facility of the institute, vehicle front structures were tested successfully. The results of all investigations regarding sandwich materials, integration of functions (e.g. crash, thermal) in vehicle structures and the concept LUV are developed under the research program of Next Generation Car of the DLR. We will show the development and results of the LUV.

Knowing Inquiry as Practice and Theory: Developing a Pedagogical Framework with Elementary School Teachers

NASA Astrophysics Data System (ADS)

Poon, Chew-Leng; Lee, Yew-Jin; Tan, Aik-Ling; Lim, Shirley S. L.

2012-04-01

In this paper, we characterize the inquiry practices of four elementary school teachers by means of a pedagogical framework. Our study revealed core components of inquiry found in theoretically-driven models as well as practices that were regarded as integral to the success of day-to-day science teaching in Singapore. This approach towards describing actual science inquiry practices—a surprisingly neglected area—uncovered nuances in teacher instructions that can impact inquiry-based lessons as well as contribute to a practice-oriented perspective of science teaching. In particular, we found that these teachers attached importance to (a) preparing students for investigations, both cognitively and procedurally; (b) iterating pedagogical components where helping students understand and construct concepts did not follow a planned linear path but involved continuous monitoring of learning; and (c) synthesizing concepts in a consolidation phase. Our findings underscore the dialectical relationship between practice-oriented knowledge and theoretical conceptions of teaching/learning thereby helping educators better appreciate how teachers adapt inquiry science for different contexts.

Familial Transmission of Educational Plans and the Academic Self-Concept: A Three-Generation Longitudinal Study.

PubMed

Mortimer, Jeylan T; Zhang, Lei; Wu, Chen-Yu; Hussemann, Jeanette; Johnson, Monica Kirkpatrick

2017-03-01

This research investigates the social reproduction of inequality by drawing on prospective longitudinal data from three generations of Youth Development Study respondents. It examines intergenerational influence on the relatively unexplored academic self-concept as well as educational plans, a critical component of the status attainment model. A structural equation model, based on 422 3-generation triads, finds evidence that the sources giving rise to the development of children's (Generation 3) achievement orientations do not only result from parental (G2) contemporaneous influence. Prior influences implicate grandparent (G1) educational attainment and income, grandparental expectations for the G2 adolescent, the G2 academic self-concept and educational plans measured more than twenty years earlier (in G2's adolescence), and G2 educational attainment. A familial culture emphasizing academic self-confidence and high educational expectations may be an important component of "family capital" that supports educational attainment and contributes to the maintenance of social class position in each successive generation.

Active heat exchange system development for latent heat thermal energy storage

NASA Astrophysics Data System (ADS)

Lefrois, R. T.; Mathur, A. K.

1980-04-01

Five tasks to select, design, fabricate, test and evaluate candidate active heat exchanger modules for future applications to solar and conventional utility power plants were discussed. Alternative mechanizations of active heat exchange concepts were analyzed for use with heat of fusion phase change materials (PCMs) in the temperature range of 250 to 350 C. Twenty-six heat exchange concepts were reviewed, and eight were selected for detailed assessment. Two candidates were selected for small-scale experimentation: a coated tube and shell heat exchanger and a direct contact reflux boiler. A dilute eutectic mixture of sodium nitrate and sodium hydroxide was selected as the PCM from over 50 candidate inorganic salt mixtures. Based on a salt screening process, eight major component salts were selected initially for further evaluation. The most attractive major components in the temperature range of 250 to 350 C appeared to be NaNO3, NaNO2, and NaOH. Sketches of the two active heat exchange concepts selected for test are given.

[Working memory and work with memory: visual-spatial and further components of processing].

PubMed

Velichkovsky, B M; Challis, B H; Pomplun, M

1995-01-01

Empirical and theoretical evidence for the concept of working memory is considered. We argue that the major weakness of this concept is its loose connection with the knowledge about background perceptive and cognitive processes. Results of two relevant experiments are provided. The first study demonstrated the classical chunking effect in a speeded visual search and comparison task, the proper domain of a large-capacity very short term sensory store. Our second study was a kind of extended levels-of-processing experiment. We attempted to manipulate visual, phonological, and (different) executive components of long-term memory in the hope of finding some systematic relationships between these forms of processing. Indeed, the results demonstrated a high degree of systematicity without any apparent need for a concept such as working memory for the explanation. Accordingly, the place for working memory is at all the interfaces where our metacognitive strategies interfere with mostly domain-specific cognitive mechanisms. Working memory is simply our work with memory.

Designers' models of the human-computer interface

NASA Technical Reports Server (NTRS)

Gillan, Douglas J.; Breedin, Sarah D.

1993-01-01

Understanding design models of the human-computer interface (HCI) may produce two types of benefits. First, interface development often requires input from two different types of experts: human factors specialists and software developers. Given the differences in their backgrounds and roles, human factors specialists and software developers may have different cognitive models of the HCI. Yet, they have to communicate about the interface as part of the design process. If they have different models, their interactions are likely to involve a certain amount of miscommunication. Second, the design process in general is likely to be guided by designers' cognitive models of the HCI, as well as by their knowledge of the user, tasks, and system. Designers do not start with a blank slate; rather they begin with a general model of the object they are designing. The author's approach to a design model of the HCI was to have three groups make judgments of categorical similarity about the components of an interface: human factors specialists with HCI design experience, software developers with HCI design experience, and a baseline group of computer users with no experience in HCI design. The components of the user interface included both display components such as windows, text, and graphics, and user interaction concepts, such as command language, editing, and help. The judgments of the three groups were analyzed using hierarchical cluster analysis and Pathfinder. These methods indicated, respectively, how the groups categorized the concepts, and network representations of the concepts for each group. The Pathfinder analysis provides greater information about local, pairwise relations among concepts, whereas the cluster analysis shows global, categorical relations to a greater extent.

Design of a recumbent seating system

NASA Technical Reports Server (NTRS)

Croyle, Scott; Delarosa, Jose; George, Daren; Hinkle, Cathy; Karas, Stephen

1993-01-01

Future space shuttle missions presented by NASA might require the shuttle to rendezvous with the Russian space station Mir for the purpose of transporting astronauts back to earth. Due to the atrophied state of these astronauts, a special seating system must be designed for their transportation. The main functions of this seating system are to support and restrain the astronauts during normal reentry flight and to dampen some of the loading that might occur in a crash situation. Through research, the design team developed many concept variants for these functional requirements. By evaluating each variant, the concepts were eliminated until the four most attractive designs remained. The team used a decision matrix to determine the best concept to carry through embodiment. This concept involved using struts for support during reentry flight and a spring damper/shock absorber system to dampen crash landing loads. The embodiment design process consisted of defining the layout of each of the main functional components, specifically, the seat structure and the strut structure. Through the use of MCS/pal two, the design was refined until it could handle all required loads and dampen to the forces specified. The auxiliary function carriers were then considered. Following the design of these components, the complete final layout could be determined. It is concluded that the final design meets all specifications outlined in the conceptual design. The main advantages of this design are its low weight, simplicity, and large amount of function sharing between different components. The disassembly of this design could potentially present a problem because of time and size constraints involved. Overall, this design meets or exceeds all functional requirements.

Developmental Dynamics of General and School-Subject-Specific Components of Academic Self-Concept, Academic Interest, and Academic Anxiety

PubMed Central

Gogol, Katarzyna; Brunner, Martin; Preckel, Franzis; Goetz, Thomas; Martin, Romain

2016-01-01

The present study investigated the developmental dynamics of general and subject-specific (i.e., mathematics, French, and German) components of students' academic self-concept, anxiety, and interest. To this end, the authors integrated three lines of research: (a) hierarchical and multidimensional approaches to the conceptualization of each construct, (b) longitudinal analyses of bottom-up and top-down developmental processes across hierarchical levels, and (c) developmental processes across subjects. The data stemmed from two longitudinal large-scale samples (N = 3498 and N = 3863) of students attending Grades 7 and 9 in Luxembourgish schools. Nested-factor models were applied to represent each construct at each grade level. The analyses demonstrated that several characteristics were shared across constructs. All constructs were multidimensional in nature with respect to the different subjects, showed a hierarchical organization with a general component at the apex of the hierarchy, and had a strong separation between the subject-specific components at both grade levels. Further, all constructs showed moderate differential stabilities at both the general (0.42 < r < 0.55) and subject-specific levels (0.45 < r < 0.73). Further, little evidence was found for top-down or bottom-up developmental processes. Rather, general and subject-specific components in Grade 9 proved to be primarily a function of the corresponding components in Grade 7. Finally, change in several subject-specific components could be explained by negative effects across subjects. PMID:27014162

Developmental Dynamics of General and School-Subject-Specific Components of Academic Self-Concept, Academic Interest, and Academic Anxiety.

PubMed

Gogol, Katarzyna; Brunner, Martin; Preckel, Franzis; Goetz, Thomas; Martin, Romain

2016-01-01

The present study investigated the developmental dynamics of general and subject-specific (i.e., mathematics, French, and German) components of students' academic self-concept, anxiety, and interest. To this end, the authors integrated three lines of research: (a) hierarchical and multidimensional approaches to the conceptualization of each construct, (b) longitudinal analyses of bottom-up and top-down developmental processes across hierarchical levels, and (c) developmental processes across subjects. The data stemmed from two longitudinal large-scale samples (N = 3498 and N = 3863) of students attending Grades 7 and 9 in Luxembourgish schools. Nested-factor models were applied to represent each construct at each grade level. The analyses demonstrated that several characteristics were shared across constructs. All constructs were multidimensional in nature with respect to the different subjects, showed a hierarchical organization with a general component at the apex of the hierarchy, and had a strong separation between the subject-specific components at both grade levels. Further, all constructs showed moderate differential stabilities at both the general (0.42 < r < 0.55) and subject-specific levels (0.45 < r < 0.73). Further, little evidence was found for top-down or bottom-up developmental processes. Rather, general and subject-specific components in Grade 9 proved to be primarily a function of the corresponding components in Grade 7. Finally, change in several subject-specific components could be explained by negative effects across subjects.

Problemes theoriques et methodologiques dans l'etude des langues/dialectes en contact aux niveaux macrologique et micrologique = Theoretical and Methodological Issues in the Study of Languages/Dialects in Contact at Macro- and Micro-Logical Levels of Analysis. Proceedings of the International Conference DALE (University of London)/ICRB (Laval University, Quebec)/ICSBT (Vrije Universiteit te Brussel) (London, England, May 23-26, 1985).

ERIC Educational Resources Information Center

Blanc, Michel, Ed.; Hamers, Josiane F., Ed.

Papers from an international conference on the interaction of languages and dialects in contact are presented in this volume. Papers include: "Quelques reflexions sur la variation linguistique"; "The Investigation of 'Language Continuum' and 'Diglossia': A Macrological Case Study and Theoretical Model"; "A Survey of…

Calculation of effective plutonium cross sections and check against the oscillation experiment CESAR-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaal, H.; Bernnat, W.

1987-10-01

For calculations of high-temperature gas-cooled reactors with low-enrichment fuel, it is important to know the plutonium cross sections accurately. Therefore, a calculational method was developed, by which the plutonium cross-section data of the ENDF/B-IV library can be examined. This method uses zero- and one-dimensional neutron transport calculations to collapse the basic data into one-group cross sections, which then can be compared with experimental values obtained from integral tests. For comparison the data from the critical experiment CESAR-II of the Centre d'Etudes Nucleaires, Cadarache, France, were utilized.

Adult Education: The Past, the Present, and the Future. Proceedings of the Annual Conference of the Canadian Association for the Study of Adult Education (14th, Montreal, Quebec, Canada, June 1-3, 1995) = L'Education des Adultes: Un Passe, Un Present, un Avenir. Les Actes du Congress Annuel, l'Association Canadienne pour l'Etude de l'Education des Adultes (14e, Montreal, Quebec, Canada, 1-3 Juin, 1995).

ERIC Educational Resources Information Center

Danis, Claudia, Ed.; Hrimech, Mohamed, Ed.

The following papers (with nine in French) are included: "Refocusing the Multicultural Discourse in Adult Education" (Acton); "University Extension and the Service University" (Archer); "Linking Cases to Course Content" (Block); "The Effects of Education on Food Security among Low Income Urban Adults"…

Study of Some Mineral Exchangers for Use in Water at High Temperature; ETUDE DE QUELQUES ECHANGEURS MINERAUX UTILISABLES DANS L'EAU A HAUTE TEMPERATURE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hure, J.; Platzer, R.; Bittel, R.

1959-10-31

The study of the use of ion exchangers at high temperatures was made with a view to the purification of water in reactors. Natural ion exchangers with mineral structures (clay of the montmorillonite type), natural mineral compounds so treated as to give them the properties of ion exchangers (activated graphite), and synthetic mineral compounds (zirconium phosphates and hydroxides and thorium hydroxide) were investigated. The preparation of the minerals is described, and the results obtained with them are discussed in detail. (J.S.R.)

L'interdisciplinarite en sciences sociales pour l'etude du contact des langues (Interdisciplinarity in Social Sciences of the Study of the Relationships of Languages). Proceedings of a Colloquium of the International Center for Research on Bilingualism and the Institute for Interethnic and Intercultural Studies and Research (2nd, Quebec City, Quebec, Canada, October 1-5, 1984).

ERIC Educational Resources Information Center

Prujiner, Alain, Ed.

Papers given at an international conference applying the social sciences to the study of the relationships of languages include the following: "Reseaux sociaux et comportements langagiers en milieu de contact des langues" ("Social Networks and Language Behaviors in a Language Contact Setting") by M. Blanc and J. Hamers, with…

Status of Day Care in Canada, 1984: A Review of the Major Findings of the National Day Care Study, 1984 = Situation de la garde de jour au Canada, 1984: Revue des principales conclusions tirees de l'etude nationale menee en 1984 sur la garde de jour.

ERIC Educational Resources Information Center

National Day Care Information Centre, Ottawa (Ontario).

Intended to give Canadians a general overview of the country's day care services, the study was undertaken by the Social Service Programs Branch, Health and Welfare, Canada. Begun in 1971 and updated yearly since 1973, the national survey provides an inventory of day care spaces which can be used to measure future growth in day care and to…

Status of Day Care in Canada, 1983: A Review of the Major Findings of the National Day Care Study, 1983. = Situation de la garde de jour au Canada, 1983: Revue des principales conclusions de l'etude nationale sur la garde de jour en 1983.

ERIC Educational Resources Information Center

National Day Care Information Centre, Ottawa (Ontario).

The major purpose of the Status of Day Care in Canada reports is to gather information from the provinces concerning day care spaces in order to determine the growth of day care from year to year. In addition to reporting the increase in the availability of day care services from 1973 to 1983, this report provides data on the ages of children…