Comprehensive care plus creative architecture.

PubMed

Easter, James G

2005-01-01

The delivery of high-quality, comprehensive cancer care and the treatment environment go hand in hand with the patient's recovery. When the planning and design of a comprehensive cancer care program runs parallel to the operational expectations and functional standards, the building users (patients, staff, and physicians) benefit significantly. This behavioral response requires a sensitive interface during the campus master planning, architectural programming, and design phases. Each building component and user functioning along the "continuum of care" will have different expectations, programmatic needs, and design responses. This article addresses the community- and hospital-based elements of this continuum. The environment does affect the patient care and the care-giving team members. It may be a positive or, unfortunately, a negative response.

40 CFR 63.1207 - What are the performance testing requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... operating conditions that are most likely to reflect daily maximum operating variability, similar to a... operating variability, similar to a dioxin/furan compliance test; (B) You have not changed the design or... document the temperature location measurement in the comprehensive performance test plan, as required by...

Modelling and simulation of complex sociotechnical systems: envisioning and analysing work environments

PubMed Central

Hettinger, Lawrence J.; Kirlik, Alex; Goh, Yang Miang; Buckle, Peter

2015-01-01

Accurate comprehension and analysis of complex sociotechnical systems is a daunting task. Empirically examining, or simply envisioning the structure and behaviour of such systems challenges traditional analytic and experimental approaches as well as our everyday cognitive capabilities. Computer-based models and simulations afford potentially useful means of accomplishing sociotechnical system design and analysis objectives. From a design perspective, they can provide a basis for a common mental model among stakeholders, thereby facilitating accurate comprehension of factors impacting system performance and potential effects of system modifications. From a research perspective, models and simulations afford the means to study aspects of sociotechnical system design and operation, including the potential impact of modifications to structural and dynamic system properties, in ways not feasible with traditional experimental approaches. This paper describes issues involved in the design and use of such models and simulations and describes a proposed path forward to their development and implementation. Practitioner Summary: The size and complexity of real-world sociotechnical systems can present significant barriers to their design, comprehension and empirical analysis. This article describes the potential advantages of computer-based models and simulations for understanding factors that impact sociotechnical system design and operation, particularly with respect to process and occupational safety. PMID:25761227

Objects Architecture: A Comprehensive Design Approach for Real-Time, Distributed, Fault-Tolerant, Reactive Operating Systems.

DTIC Science & Technology

1987-09-01

real - time operating system should be efficient from the real-time point...5,8]) system naming scheme. 3.2 Protecting Objects Real-time embedded systems usually neglect protection mechanisms. However, a real - time operating system cannot...allocation mechanism should adhere to application constraints. This strong relationship between a real - time operating system and the application

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2011 CFR

2011-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2012 CFR

2012-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2010 CFR

2010-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2013 CFR

2013-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

23 CFR 636.103 - What are the definitions of terms used in this part?

Code of Federal Regulations, 2014 CFR

2014-04-01

... AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.103 What are the definitions of terms... is designed to foster an impartial and comprehensive evaluation of offerors' proposals, leading to... agency awarding and administering a design-build contract. The contracting agency may be the STD or...

Operation Rescue. Final Report.

ERIC Educational Resources Information Center

McKee, Neena; Crawford, Georgette

The Operation Rescue project was designed to develop a classroom setting for the delivery of comprehensive educational services to "at risk" young adolescents. The classroom was established as part of the pre-existing Jonesboro Alternative School, and it utilized the basic academic and social program developed by this entity over 12…

The Impact of a Comprehensive Tier I Core Kindergarten Program on the Achievement of Students at Risk in Mathematics

ERIC Educational Resources Information Center

Clarke, Ben; Smolkowski, Keith; Baker, Scott K.; Fien, Hank; Doabler, Christian T.; Chard, David J.

2011-01-01

This study examined the efficacy of a core kindergarten mathematics program, ELM, a 120-lesson comprehensive curriculum providing instruction in (a) number operations, (b) geometry, (c) measurement, and (d) vocabulary. ELM is designed to address the learning needs of all students, including at-risk students in the general education or Tier I…

Demonstration of enhanced human service transportation models: phase 1 - system development and design : the purchase area regional travel management coordination center (TMCC).

DOT National Transportation Integrated Search

2009-03-23

This report provides a comprehensive review of the policy, operational, and : technical design and development of the Purchase Area Transportation Management Coordination Center (TMCC) for : western Kentucky. The Purchase Area TMCC will facilitate si...

An Operational Blueprint for Health Career Education and Training Program. Final Report.

ERIC Educational Resources Information Center

Hood, Theresa W.; Thompson, Christopher W.

An operational blueprint for health career education and training was designed to provide the District of Columbia public schools with a documented strategy for implementing a comprehensive, multifocal health careers program. The blueprint will establish a mechanism for interagency communication and cooperation at all levels, involving all aspects…

Indications of comprehensiveness in the pedagogical relationship: a design to be constructed in nursing education.

PubMed

Lima, Margarete Maria de; Reibnitz, Kenya Schmidt; Kloh, Daiana; Martini, Jussara Gue; Backes, Vania Marli Schubert

2017-11-27

To analyze how the indications of comprehensiveness translate into the teaching-learning process in a nursing undergraduate course. Qualitative case study carried out with professors of a Nursing Undergraduate Course. Data collection occurred through documentary analysis, non-participant observation and individual interviews. Data analysis was guided from an analytical matrix following the steps of the operative proposal. Eight professors participated in the study. Some indications of comprehensiveness such as dialogue, listening, mutual respect, bonding and welcoming are present in the daily life of some professors. The indications of comprehensiveness are applied by some professors in the pedagogical relationship. The results refer to the Comprehensiveness of teaching-learning in a single and double loop model, and in this the professor and the student assume an open posture for new possibilities in the teaching-learning process. Comprehensiveness, as it is recognized as a pedagogical principle, allows the disruption of a professor-centered teaching and advances in collective learning, enabling the professor and student to create their own design anchored in a reflective process about their practices and the reality found in the health services.

A study of multiplex data bus techniques for the space shuttle

NASA Technical Reports Server (NTRS)

Kearney, R. J.; Kalange, M. A.

1972-01-01

A comprehensive technology base for the design of a multiplexed data bus subsystem is provided. Extensive analyses, both analytical and empirical, were performed. Subjects covered are classified under the following headings: requirements identification and analysis; transmission media studies; signal design and detection studies; synchronization, timing, and control studies; user-subsystem interface studies; operational reliability analyses; design of candidate data bus configurations; and evaluation of candidate data bus designs.

Preparation of Effective Operating Manuals to Support Waste Management Plant Operator Training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, S. R.

2003-02-25

Effective plant operating manuals used in a formal training program can make the difference between a successful operation and a failure. Once the plant process design and control strategies have been fixed, equipment has been ordered, and the plant is constructed, the only major variable affecting success is the capability of plant operating personnel. It is essential that the myriad details concerning plant operation are documented in comprehensive operating manuals suitable for training the non-technical personnel that will operate the plant. These manuals must cover the fundamental principles of each unit operation including how each operates, what process variables aremore » important, and the impact of each variable on the overall process. In addition, operators must know the process control strategies, process interlocks, how to respond to alarms, each of the detailed procedures required to start up and optimize the plant, and every control loop-including when it is appropriate to take manual control. More than anything else, operating mistakes during the start-up phase can lead to substantial delays in achieving design processing rates as well as to problems with government authorities if environmental permit limits are exceeded. The only way to assure return on plant investment is to ensure plant operators have the knowledge to properly run the plant from the outset. A comprehensive set of operating manuals specifically targeted toward plant operators and supervisors written by experienced operating personnel is the only effective way to provide the necessary information for formal start-up training.« less

Clean Air Program : Design Guidelines for Bus Transit Systems Using Alcohol Fuel (Methanol and Ethanol) as an Alternative Fuel

DOT National Transportation Integrated Search

1996-08-01

Although there are over one thousand transit buses in revenue service in the U.S. that are powered by alternative fuels, there are no comprehensive guidelines for the safe design and operation of alternative fuel facilities and vehicles for transit s...

76 FR 68769 - Bridging the Idea Development Evaluation Assessment and Long-Term Initiative and Total Product...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... complementary methodological frameworks of the IDEAL and TPLC initiatives, more comprehensive and applicable... devices, surgical operations, and invasive medical procedures; Unique study designs and reporting methods...

Guidelines for developing transportation management plans in Virginia.

DOT National Transportation Integrated Search

2005-01-01

A transportation management plan (TMP) is a comprehensive program of traffic control, communication, operation, and demand management strategies designed to maintain acceptable levels of traffic flow in work zones. A systematic procedure and/or check...

Sustainable Telemedicine: Designing and Building Infrastructure to Support a Comprehensive Telemedicine Practice.

PubMed

Kreofsky, Beth L H; Blegen, R Nicole; Lokken, Troy G; Kapraun, Susan M; Bushman, Matthew S; Demaerschalk, Bart M

2018-04-16

Telemedicine services in medical institutions are often developed in isolation of one another and not as part of a comprehensive telemedicine program. The Center for Connected Care is the administrative home for a broad range of telehealth services at Mayo Clinic. This article speaks of real-time video services, referenced as telemedicine throughout. This article discusses how a large healthcare system designed and built the infrastructure to support a comprehensive telemedicine practice. Based on analysis of existing services, Mayo Clinic developed a multifaceted operational plan that addressed high-priority areas and outlined clear roles and responsibilities of the Center for Connected Care and that of the clinical departments. The plan set priorities and a direction that would lead to long-term success. The plan articulated the governing and operational infrastructure necessary to support telemedicine by defining the role of the Center for Connected Care as the owner of core administrative operations and the role of the clinical departments as the owners of clinical telemedicine services. Additional opportunities were identified to develop product selection processes, implementation services, and staffing models that would be applied to ensure successful telemedicine deployment. The telemedicine team within the Center for Connected Care completed 45 business cases resulting in 54 implementations. The standardization of core products along with key operational offerings around implementation services, and the establishment of a 24/7 support model resulted in improved provider satisfaction and fewer reported technical issues. The foundation for long-term scalability and growth was developed by centralizing operations of telemedicine services, implementing sustainable processes, employing dedicated qualified personnel, and deploying robust products.

Development of an advanced anaerobic digester design and a kinetic model for biogasification of water hyacinth/sludge blends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, V.; Fannin, K.F.; Biljetina, R.

1986-07-01

The Institute of Gas Technology (IGT) conducted a comprehensive laboratory-scale research program to develop and optimize the anaerobic digestion process for producing methane from water hyacinth and sludge blends. This study focused on digester design and operating techniques, which gave improved methane yields and production rates over those observed using conventional digesters. The final digester concept and the operating experience was utilized to design and operate a large-scale experimentla test unit (ETU) at Walt Disney World, Florida. This paper describes the novel digester design, operating techniques, and the results obtained in the laboratory. The paper also discusses a kinetic modelmore » which predicts methane yield, methane production rate, and digester effluent solids as a function of retention time. This model was successfully utilized to predict the performance of the ETU. 15 refs., 6 figs., 6 tabs.« less

Whole Building Design Objectives for Campus Safety and Security: A System Dynamics Approach

ERIC Educational Resources Information Center

Oakes, Charles G.

2010-01-01

The May/June 2009 issue of "Facilities Manager" introduced APPA readers to the Whole Building Design Guide (WBDG)--today's most comprehensive Internet-based depository of resources contributing to a systems approach for everything of a building nature. The emphasis in that article was on Operations and Maintenance (O&M) issues and procedures. In…

Space station proximity operations windows: Human factors design guidelines

NASA Technical Reports Server (NTRS)

Haines, Richard F.

1987-01-01

Proximity operations refers to all activities outside the Space Station which take place within a 1-km radius. Since there will be a large number of different operations involving manned and unmanned vehicles, single- and multiperson crews, automated and manually controlled flight, a wide variety of cargo, and construction/repair activities, accurate and continuous human monitoring of these operations from a specially designed control station on Space Station will be required. Total situational awareness will be required. This paper presents numerous human factors design guidelines and related background information for control windows which will support proximity operations. Separate sections deal with natural and artificial illumination geometry; all basic rendezvous vector approaches; window field-of-view requirements; window size; shape and placement criteria; window optical characteristics as they relate to human perception; maintenance and protection issues; and a comprehensive review of windows installed on U.S. and U.S.S.R. manned vehicles.

The CEBAF Element Database and Related Operational Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larrieu, Theodore; Slominski, Christopher; Keesee, Marie

The newly commissioned 12GeV CEBAF accelerator relies on a flexible, scalable and comprehensive database to define the accelerator. This database delivers the configuration for CEBAF operational tools, including hardware checkout, the downloadable optics model, control screens, and much more. The presentation will describe the flexible design of the CEBAF Element Database (CED), its features and assorted use case examples.

The role of the real-time simulation facility, SIMFAC, in the design, development and performance verification of the Shuttle Remote Manipulator System (SRMS) with man-in-the-loop

NASA Technical Reports Server (NTRS)

Mccllough, J. R.; Sharpe, A.; Doetsch, K. H.

1980-01-01

The SIMFAC has played a vital role in the design, development, and performance verification of the shuttle remote manipulator system (SRMS) to be installed in the space shuttle orbiter. The facility provides for realistic man-in-the-loop operation of the SRMS by an operator in the operator complex, a flightlike crew station patterned after the orbiter aft flight deck with all necessary man machine interface elements, including SRMS displays and controls and simulated out-of-the-window and CCTV scenes. The characteristics of the manipulator system, including arm and joint servo dynamics and control algorithms, are simulated by a comprehensive mathematical model within the simulation subsystem of the facility. Major studies carried out using SIMFAC include: SRMS parameter sensitivity evaluations; the development, evaluation, and verification of operating procedures; and malfunction simulation and analysis of malfunction performance. Among the most important and comprehensive man-in-the-loop simulations carried out to date on SIMFAC are those which support SRMS performance verification and certification when the SRMS is part of the integrated orbiter-manipulator system.

Airframe noise: A design and operating problem

NASA Technical Reports Server (NTRS)

Hardin, J. C.

1976-01-01

A critical assessment of the state of the art in airframe noise is presented. Full-scale data on the intensity, spectra, and directivity of this noise source are evaluated in light of the comprehensive theory developed by Ffowcs Williams and Hawkings. Vibration of panels on the aircraft is identified as a possible additional source of airframe noise. The present understanding and methods for prediction of other component sources - airfoils, struts, and cavities - are discussed. Operating problems associated with airframe noise as well as potential design methods for airframe noise reduction are identified.

The Sampling Design of the China Family Panel Studies (CFPS)

PubMed Central

Xie, Yu; Lu, Ping

2018-01-01

The China Family Panel Studies (CFPS) is an on-going, nearly nationwide, comprehensive, longitudinal social survey that is intended to serve research needs on a large variety of social phenomena in contemporary China. In this paper, we describe the sampling design of the CFPS sample for its 2010 baseline survey and methods for constructing weights to adjust for sampling design and survey nonresponses. Specifically, the CFPS used a multi-stage probability strategy to reduce operation costs and implicit stratification to increase efficiency. Respondents were oversampled in five provinces or administrative equivalents for regional comparisons. We provide operation details for both sampling and weights construction. PMID:29854418

The Design and Implementation of an Operating System for the IBM Personal Computer.

DTIC Science & Technology

1984-12-01

comprehensive study of an actual operating system in an effort to show students how theory has been put into action (Lions, 1978; McCharen, 1980). Another...Freedman, 1977). However, since it is easier to develop and maintain a program written in a high-order language (HOL), Pascal was chosen to be the primary...monolithic monitor approach and the kernel approach are strategies which can be used to structure operating systems ( Deitel , 1983; Holt, 1983

A review on the sustainability of constructed wetlands for wastewater treatment: Design and operation.

PubMed

Wu, Haiming; Zhang, Jian; Ngo, Huu Hao; Guo, Wenshan; Hu, Zhen; Liang, Shuang; Fan, Jinlin; Liu, Hai

2015-01-01

Constructed wetlands (CWs) have been used as a green technology to treat various wastewaters for several decades. CWs offer a land-intensive, low-energy, and less-operational-requirements alternative to conventional treatment systems, especially for small communities and remote locations. However, the sustainable operation and successful application of these systems remains a challenge. Hence, this paper aims to provide and inspire sustainable solutions for the performance and application of CWs by giving a comprehensive review of CWs' application and the recent development on their sustainable design and operation for wastewater treatment. Firstly, a brief summary on the definition, classification and application of current CWs was presented. The design parameters and operational conditions of CWs including plant species, substrate types, water depth, hydraulic load, hydraulic retention time and feeding mode related to the sustainable operation for wastewater treatments were then discussed. Lastly, future research on improving the stability and sustainability of CWs were highlighted. Copyright © 2014 Elsevier Ltd. All rights reserved.

Process computerization of No. 13 blast furnace at Gary works

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherman, G.J.; Zmierski, M.L.; Hyle, F.W.

1993-10-01

No. 13 blast furnace underwent extensive modifications to the process control system during the second reline. This represents a major shift in control philosophy from hardwired relays and analog controllers to a totally integrated computer control system. The new system created the opportunity for comprehensive diagnostic analysis and increased flexibility for control strategy modifications. The goal of achieving maximum production with minimal delay was accomplished by an integrated test, and comprehensive operator and maintenance training. Normal production was reached within four days of blow-ink and design production capacity of 7800 NTHM/day was met in the third month of operation. Recordmore » furnace productivity of 8931 NTHM/day (8.56 NTHM/100 crwv) was achieved in less than five months of operation and again in April 1992 of 9062 NTHM/day (8.68 NTHM/100 cfwv).« less

32 CFR 176.5 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

32 CFR 176.5 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

24 CFR 586.5 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

77 FR 43831 - Statement of Organization, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

...; (18) develops, designs, and implements a comprehensive leadership and career management program for... results in management reports. Ethics Program Activity (CAJQ12). (1) Provides leadership for the CDC... relevant messages. Operations Management Activity (CAJQ17). (1) Provides leadership, oversight, and...

DJANAL user's manual

NASA Technical Reports Server (NTRS)

Pitts, E. R.

1976-01-01

The DJANAL (DisJunct ANALyzer) Program provides a means for the LSI designer to format output from the Mask Analysis Program (MAP) for input to the FETLOG (FETSIM/LOGSIM) processor. This document presents a brief description of the operation of DJANAL and provides comprehensive instruction for its use.

24 CFR 586.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... system. (1) A comprehensive homeless assistance system that includes: (i) A system of outreach and... services that has no established limitation on the amount of time of residence to help meet long-term needs... publicly or privately operated shelter designed to provide temporary living accommodations (including...

Understanding driver performance variability and perception of risk : driver hazard perception research plan

DOT National Transportation Integrated Search

1998-01-01

The objectives of this research project were to develop a comprehensive and clearly defined research program to define, : measure, and quantify driver perception of hazards as it relates to highway design, operations, and safety, standards This was :...

The neural basis of humour comprehension and humour appreciation: The roles of the temporoparietal junction and superior frontal gyrus.

PubMed

Campbell, Darren W; Wallace, Marc G; Modirrousta, Mandana; Polimeni, Joseph O; McKeen, Nancy A; Reiss, Jeffrey P

2015-12-01

Psychological well-being and social acumen benefit from the recognition of humourous intent and its enjoyment. The enjoyment of humour requires recognition, but humour recognition is not necessarily accompanied by humour enjoyment. Humour recognition is crucial during social interactions, while the associated enjoyment is less critical. Few neuroimaging studies have explicitly differentiated between the neural foundations of humour comprehension and humour appreciation. Among such studies, design limitations have obscured the specification of neural correlates to humour comprehension or appreciation. We implemented a trichotomous response option to address these design limitations. Twenty-four participants rated 120 comics (90 unaltered with humourous intent and 30 caption-altered without humourous intent) as either funny jokes (FJ), not funny jokes but intended to be funny (NFJ), or not intended to be funny or non-jokes (NJ). We defined humour comprehension by NFJ minus NJ and humour appreciation by FJ minus NFJ. We measured localized blood oxygen level dependent (BOLD) neural responses with a 3T MRI scanner. We tested for BOLD responses in humour comprehension brain regions of interest (ROIs), humour appreciation ROIs, and across the whole-brain. We found significant NFJ-NJ BOLD responses in our humour comprehension ROIs and significant FJ-NFJ BOLD responses in select humour appreciation ROIs. One key finding is that comprehension accuracy levels correlated with humour-comprehension responses in the left temporo-parietal junction (TPJ). This finding represents a novel and precise neural linkage to humour comprehension. A second key finding is that the superior frontal gyrus (SFG) was uniquely associated with humour-appreciation. The SFG response suggests that complex cognitive processing underlies humour appreciation and that current models of humour appreciation be revised. Finally, our research design provides an operational distinction between humour comprehension and appreciation and a sensitive measure of individual differences in humour comprehension accuracy. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hercules Single-Stage Reusable Vehicle (HSRV) Operating Base

NASA Technical Reports Server (NTRS)

Moon, Michael J.; McCleskey, Carey M.

2017-01-01

Conceptual design for the layout of lunar-planetary surface support systems remains an important area needing further master planning. This paper explores a structured approach to organize the layout of a Mars-based site equipped for routinely flying a human-scale reusable taxi system. The proposed Hercules Transportation System requires a surface support capability to sustain its routine, affordable, and dependable operation. The approach organizes a conceptual Hercules operating base through functional station sets. The station set approach will allow follow-on work to trade design approaches and consider technologies for more efficient flow of material, energy, and information at future Mars bases and settlements. The station set requirements at a Mars site point to specific capabilities needed. By drawing from specific Hercules design characteristics, the technology requirements for surface-based systems will come into greater focus. This paper begins a comprehensive process for documenting functional needs, architectural design methods, and analysis techniques necessary for follow-on concept studies.

Zebrafish housing systems: a review of basic operating principles and considerations for design and functionality.

PubMed

Lawrence, Christian; Mason, Timothy

2012-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations.

A comprehensive operating room information system using the Kinect sensors and RFID.

PubMed

Nouei, Mahyar Taghizadeh; Kamyad, Ali Vahidian; Soroush, Ahmad Reza; Ghazalbash, Somayeh

2015-04-01

Occasionally, surgeons do need various types of information to be available rapidly, efficiently and safely during surgical procedures. Meanwhile, they need to free up hands throughout the surgery to necessarily access the mouse to control any application in the sterility mode. In addition, they are required to record audio as well as video files, and enter and save some data. This is an attempt to develop a comprehensive operating room information system called "Medinav" to tackle all mentioned issues. An integrated and comprehensive operating room information system is introduced to be compatible with Health Level 7 (HL7) and digital imaging and communications in medicine (DICOM). DICOM is a standard for handling, storing, printing, and transmitting information in medical imaging. Besides, a natural user interface (NUI) is designed specifically for operating rooms where touch-less interactions with finger and hand tracking are in use. Further, the system could both record procedural data automatically, and view acquired information from multiple perspectives graphically. A prototype system is tested in a live operating room environment at an Iranian teaching hospital. There are also contextual interviews and usability satisfaction questionnaires conducted with the "MediNav" system to investigate how useful the proposed system could be. The results reveal that integration of these systems into a complete solution is the key to not only stream up data and workflow but maximize surgical team usefulness as well. It is now possible to comprehensively collect and visualize medical information, and access a management tool with a touch-less NUI in a rather quick, practical, and harmless manner.

Ergonomics and simulation-based approach in improving facility layout

NASA Astrophysics Data System (ADS)

Abad, Jocelyn D.

2018-02-01

The use of the simulation-based technique in facility layout has been a choice in the industry due to its convenience and efficient generation of results. Nevertheless, the solutions generated are not capable of addressing delays due to worker's health and safety which significantly impact overall operational efficiency. It is, therefore, critical to incorporate ergonomics in facility design. In this study, workstation analysis was incorporated into Promodel simulation to improve the facility layout of a garment manufacturing. To test the effectiveness of the method, existing and improved facility designs were measured using comprehensive risk level, efficiency, and productivity. Results indicated that the improved facility layout generated a decrease in comprehensive risk level and rapid upper limb assessment score; an increase of 78% in efficiency and 194% increase in productivity compared to existing design and thus proved that the approach is effective in attaining overall facility design improvement.

Comprehensive Testing Guidelines to Increase Efficiency in INDOT Operations

DOT National Transportation Integrated Search

2012-08-01

When INDOT designs a pavement project, the decision for QC/QA or nonQC/QA is made solely based on the quantity of pavement materials. However, the actual risk will vary depending on the severity of road conditions. The question is how to different...

Comprehensive Testing Guidelines to Increase Efficiency in INDOT Operations

DOT National Transportation Integrated Search

2012-08-01

When INDOT designs a pavement project, the decision for QC/QA or nonQC/QA is made solely based on the quantity of : pavement materials. However, the actual risk will vary depending on the severity of road conditions. The question is how : to diffe...

Comprehensive Testing Guidelines to Increase Efficiency in INDOT Operations : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

When the Indiana Department of Transportation designs a pavement project, a decision for QC/QA (Quality Control/ Quality Assurance) or nonQC/QA is made solely based on the quantity of pavement materials to be used in the project. Once the pavement...

Comprehensive Testing Guidelines to Increase Efficiency in INDOT Operations : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

When the Indiana Department of Transportation designs : a pavement project, a decision for QC/QA (Quality Control/ : Quality Assurance) or nonQC/QA is made solely : based on the quantity of pavement materials to be used : in the project. Once the ...

A comprehensive methodology for intelligent systems life-cycle cost modelling

NASA Technical Reports Server (NTRS)

Korsmeyer, David J.; Lum, Henry, Jr.

1993-01-01

As NASA moves into the last part on the twentieth century, the desire to do 'business as usual' has been replaced with the mantra 'faster, cheaper, better'. Recently, new work has been done to show how the implementation of advanced technologies, such as intelligent systems, will impact the cost of a system design or in the operational cost for a spacecraft mission. The impact of the degree of autonomous or intelligent systems and human participation on a given program is manifested most significantly during the program operational phases, while the decision of who performs what tasks, and how much automation is incorporated into the system are all made during the design and development phases. Employing intelligent systems and automation is not an either/or question, but one of degree. The question is what level of automation and autonomy will provide the optimal trade-off between performance and cost. Conventional costing methodologies, however, are unable to show the significance of technologies like these in terms of traceable cost benefits and reductions in the various phases of the spacecraft's lifecycle. The proposed comprehensive life-cycle methodology can address intelligent system technologies as well as others that impact human-machine operational modes.

Communication: The Study of Human Interaction.

ERIC Educational Resources Information Center

Mortensen, C. David

Designed to provide a comprehensive and broadly based introduction to the study of human communication, this book presents the concept of communication as interrelated constituent processes that operate at varying levels of complexity and acquire significance only in the context of larger intrapersonal, interpersonal, or socio-cultural systems of…

Solar Energy Installers Curriculum Guides. Book I.

ERIC Educational Resources Information Center

Walker, Gene C.

This first volume of a comprehensive curriculum guide for the heating-ventilation-air conditioning-refrigeration-solar student is designed to assist high school area vocational centers or community college instructors in the implementation and operation of comfort training programs. Following an introductory section, the guide provides job…

MATREX Leads the Way in Implementing New DOD VV&A Documentation Standards

DTIC Science & Technology

2007-05-24

Acquisition Operations & Support B C Sustainment FRP Decision Review FOC LRIP/IOT& ECritical Design Review Pre-Systems Acquisition Concept...Communications Human Performance Model • C3GRID – Command & Control, Computer GRID • CES – Communications Effects Server • CMS2 – Comprehensive

Human Resources Test and Evaluation System (HRTES). Volume 1. Comprehensive Handbook

DTIC Science & Technology

1984-08-01

INTRODUCTION I. Overview. 7 -"This handbook is designed to assist you in evaluating the performance of the operators and maintainers in a system. The Human...field data have been collected and to diagnose probable causes of inadequate human performance. HI-I HRTES has been designed to complement the existing...71-3). HRTES was designed to meet the reporting requirements that, according to AR 71-3, are a part of the OT&E cycle. These reports are: (1) the

Advanced Launch System advanced development oxidizer turbopump program: Technical implementation plan

NASA Technical Reports Server (NTRS)

Ferlita, F.

1989-01-01

The Advanced Launch Systems (ALS) Advanced Development Oxidizer Turbopump Program has designed, fabricated and demonstrated a low cost, highly reliable oxidizer turbopump for the Space Transportation Engine that minimizes the recurring cost for the ALS engines. Pratt and Whitney's (P and W's) plan for integrating the analyses, testing, fabrication, and other program efforts is addressed. This plan offers a comprehensive description of the total effort required to design, fabricate, and test the ALS oxidizer turbopump. The proposed ALS oxidizer turbopump reduces turbopump costs over current designs by taking advantage of design simplicity and state-of-the-art materials and producibility features without compromising system reliability. This is accomplished by selecting turbopump operating conditions that are within known successful operating regions and by using proven manufacturing techniques.

Model-based optimal design of active cool thermal energy storage for maximal life-cycle cost saving from demand management in commercial buildings

DOE PAGES

Cui, Borui; Gao, Dian-ce; Xiao, Fu; ...

2016-12-23

This article provides a method in comprehensive evaluation of cost-saving potential of active cool thermal energy storage (CTES) integrated with HVAC system for demand management in non-residential building. The active storage is beneficial by shifting peak demand for peak load management (PLM) as well as providing longer duration and larger capacity of demand response (DR). In this research, a model-based optimal design method using genetic algorithm is developed to optimize the capacity of active CTES aiming for maximizing the life-cycle cost saving concerning capital cost associated with storage capacity as well as incentives from both fast DR and PLM. Inmore » the method, the active CTES operates under a fast DR control strategy during DR events while under the storage-priority operation mode to shift peak demand during normal days. The optimal storage capacities, maximum annual net cost saving and corresponding power reduction set-points during DR event are obtained by using the proposed optimal design method. Lastly, this research provides guidance in comprehensive evaluation of cost-saving potential of CTES integrated with HVAC system for building demand management including both fast DR and PLM.« less

Model-based optimal design of active cool thermal energy storage for maximal life-cycle cost saving from demand management in commercial buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, Borui; Gao, Dian-ce; Xiao, Fu

This article provides a method in comprehensive evaluation of cost-saving potential of active cool thermal energy storage (CTES) integrated with HVAC system for demand management in non-residential building. The active storage is beneficial by shifting peak demand for peak load management (PLM) as well as providing longer duration and larger capacity of demand response (DR). In this research, a model-based optimal design method using genetic algorithm is developed to optimize the capacity of active CTES aiming for maximizing the life-cycle cost saving concerning capital cost associated with storage capacity as well as incentives from both fast DR and PLM. Inmore » the method, the active CTES operates under a fast DR control strategy during DR events while under the storage-priority operation mode to shift peak demand during normal days. The optimal storage capacities, maximum annual net cost saving and corresponding power reduction set-points during DR event are obtained by using the proposed optimal design method. Lastly, this research provides guidance in comprehensive evaluation of cost-saving potential of CTES integrated with HVAC system for building demand management including both fast DR and PLM.« less

Magnetic bearings for a high-performance optical disk buffer, volume 2

NASA Technical Reports Server (NTRS)

1990-01-01

The operating instructions for the magnetic bearings of a high-performance optical disk buffer are provided. Among the topics that are discussed are the following: front panel layout, turn-on procedure, shut-down procedure, and latch-up protection. Additionally, comprehensive engineering drawings are presented for the design.

Standards Based Reform. Abbott Implementation Resource Guide

ERIC Educational Resources Information Center

Passantino, Claire; Kenyon, Susan

2004-01-01

The goal of this guide is to provide information, support and practical tools that may help educators design, implement, and evaluate their school's standards-based education program. In order to work, a comprehensive, standards-based educational program must, by definition, be the organizing structure upon which the school program operates.…

Natural Phenomena Hazards Design Criteria and Other Characterization Information for the MFFF at SRS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wyatt, D.E.

This report is a comprehensive complication applicable to the general Savannah River Site area, developed by both the original contractor, the DuPont Company, and by the current plant operator, Westinghouse Savannah River Company, over the full plant lifetime period (1950 - 2000).

Solar Energy Installers Curriculum Guides. Book II.

ERIC Educational Resources Information Center

Walker, Gene C.

This second volume of a comprehensive curriculum guide for the heating-ventilation-air conditioning-refrigeration-solar student is designed to assist high school area vocational centers or community college instructors in the implementation and operation of comfort training programs. The guide is comprised of ten units of instruction within three…

75 FR 10328 - Wolf Creek Nuclear Operating Corporation, Wolf Creek Generating Station; Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-05

... Plan, Safeguards Contingency Plan, and Cyber Security Plan referred to collectively hereafter as... its security plans. Pursuant to 10 CFR 51.32, ``Finding of no significant impact,'' the Commission has... by designing and implementing comprehensive site security programs. The amendments to 10 CFR 73.55...

Participative Evaluation for Forming Higher Education Policy: The National Higher Education Planning System.

ERIC Educational Resources Information Center

Mercado del Collado, Ricardo

Higher education planning in Mexico is discussed, with attention to: conceptual characteristics of Mexico's higher education planning system; relationships among the national, regional, state, and institutional planning levels; and design and operation of the Comprehensive Program for the Development of Higher Education. Responsibilities of…

MATREX: A Unifying Modeling and Simulation Architecture for Live-Virtual-Constructive Applications

DTIC Science & Technology

2007-05-23

Deployment Systems Acquisition Operations & Support B C Sustainment FRP Decision Review FOC LRIP/IOT& ECritical Design Review Pre-Systems...CMS2 – Comprehensive Munitions & Sensor Server • CSAT – C4ISR Static Analysis Tool • C4ISR – Command & Control, Communications, Computers

Cultivating Leadership Development: A Comprehensive Program for Undergraduates

ERIC Educational Resources Information Center

Greenleaf, Justin P.; Klaus, Kaley; Arensdorf, Jill

2017-01-01

The Voss Advanced Undergraduate Leadership Experience (VALUE), is a student cohort program with a competitive application process. Students must have a prerequisite level of leadership education and self-select into one of three designated tracks. Students are paired with faculty and community mentors to learn about operations and collaboration in…

77 FR 77001 - Comprehensive Review of Licensing and Operating Rules for Satellite Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

...] Comprehensive Review of Licensing and Operating Rules for Satellite Services AGENCY: Federal Communications... Notice of Proposed Rulemaking that initiated a comprehensive review of the Commission's rules governing... summary of the Order in IB Docket No. 12-267, Comprehensive Review of Licensing and Operating Rules for...

A Simulation Modeling Approach Method Focused on the Refrigerated Warehouses Using Design of Experiment

NASA Astrophysics Data System (ADS)

Cho, G. S.

2017-09-01

For performance optimization of Refrigerated Warehouses, design parameters are selected based on the physical parameters such as number of equipment and aisles, speeds of forklift for ease of modification. This paper provides a comprehensive framework approach for the system design of Refrigerated Warehouses. We propose a modeling approach which aims at the simulation optimization so as to meet required design specifications using the Design of Experiment (DOE) and analyze a simulation model using integrated aspect-oriented modeling approach (i-AOMA). As a result, this suggested method can evaluate the performance of a variety of Refrigerated Warehouses operations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wurtz, R.; Kaplan, A.

Pulse shape discrimination (PSD) is a variety of statistical classifier. Fully-­realized statistical classifiers rely on a comprehensive set of tools for designing, building, and implementing. PSD advances rely on improvements to the implemented algorithm. PSD advances can be improved by using conventional statistical classifier or machine learning methods. This paper provides the reader with a glossary of classifier-­building elements and their functions in a fully-­designed and operational classifier framework that can be used to discover opportunities for improving PSD classifier projects. This paper recommends reporting the PSD classifier’s receiver operating characteristic (ROC) curve and its behavior at a gamma rejectionmore » rate (GRR) relevant for realistic applications.« less

The Landsat Data Continuity Mission Operational Land Imager (OLI) Radiometric Calibration

NASA Technical Reports Server (NTRS)

Markham, Brian L.; Dabney, Philip W.; Murphy-Morris, Jeanine E.; Knight, Edward J.; Kvaran, Geir; Barsi, Julia A.

2010-01-01

The Operational Land Imager (OLI) on the Landsat Data Continuity Mission (LDCM) has a comprehensive radiometric characterization and calibration program beginning with the instrument design, and extending through integration and test, on-orbit operations and science data processing. Key instrument design features for radiometric calibration include dual solar diffusers and multi-lamped on-board calibrators. The radiometric calibration transfer procedure from NIST standards has multiple checks on the radiometric scale throughout the process and uses a heliostat as part of the transfer to orbit of the radiometric calibration. On-orbit lunar imaging will be used to track the instruments stability and side slither maneuvers will be used in addition to the solar diffuser to flat field across the thousands of detectors per band. A Calibration Validation Team is continuously involved in the process from design to operations. This team uses an Image Assessment System (IAS), part of the ground system to characterize and calibrate the on-orbit data.

New method for designing serial resonant power converters

NASA Astrophysics Data System (ADS)

Hinov, Nikolay

2017-12-01

In current work is presented one comprehensive method for design of serial resonant energy converters. The method is based on new simplified approach in analysis of such kind power electronic devices. It is grounded on supposing resonant mode of operation when finding relation between input and output voltage regardless of other operational modes (when controlling frequency is below or above resonant frequency). This approach is named `quasiresonant method of analysis', because it is based on assuming that all operational modes are `sort of' resonant modes. An estimation of error was made because of the a.m. hypothesis and is compared to the classic analysis. The `quasiresonant method' of analysis gains two main advantages: speed and easiness in designing of presented power circuits. Hence it is very useful in practice and in teaching Power Electronics. Its applicability is proven with mathematic modelling and computer simulation.

Design of a Multi-mode Flight Deck Decision Support System for Airborne Conflict Management

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Krishnamurthy, Karthik

2004-01-01

NASA Langley has developed a multi-mode decision support system for pilots operating in a Distributed Air-Ground Traffic Management (DAG-TM) environment. An Autonomous Operations Planner (AOP) assists pilots in performing separation assurance functions, including conflict detection, prevention, and resolution. Ongoing AOP design has been based on a comprehensive human factors analysis and evaluation results from previous human-in-the-loop experiments with airline pilot test subjects. AOP considers complex flight mode interactions and provides flight guidance to pilots consistent with the current aircraft control state. Pilots communicate goals to AOP by setting system preferences and actively probing potential trajectories for conflicts. To minimize training requirements and improve operational use, AOP design leverages existing alerting philosophies, displays, and crew interfaces common on commercial aircraft. Future work will consider trajectory prediction uncertainties, integration with the TCAS collision avoidance system, and will incorporate enhancements based on an upcoming air-ground coordination experiment.

Situation Awareness Recovery

DTIC Science & Technology

2013-10-07

from the SAGAT and designed to assess the perception and comprehension components of SA. Asking questions of the par- ticipant after each trial...hazards were no closer than 3° of visual angle from each other. This design ensured that targets and hazards could not co- occur in the same...vehicle triggered the payload task, whereby the operator performed a visual search task to identify an object, such as a ship or a car , in the payload

Evaluation criteria for district health management information systems: lessons from the Ministry of Health, Kenya.

PubMed

Odhiambo-Otieno, George W

2005-01-01

There has been no comprehensive evaluation of the district health management information systems (DHMISs) since the establishment of these systems by the Ministry of Health (MoH), in Kenya. This is partly due to lack of defined criteria for evaluating the systems. The objective of this study is to design evaluation criteria for assessing the viability, sustainability and ultimate contribution of DHMIS in the management of the district health system (DHS) in Kenya. This descriptive cross-sectional study was undertaken in three DHSs in Kenya. Empirical evidence was collected through interviews, complemented by a comprehensive review of relevant literature, reports and operational manuals of various health information systems in Kenya. A set of evaluation criteria for DHMISs in Kenya was designed for each of the three phases of implementation: phase one-pre-implementation evaluation criteria (categorized as policy and objectives, technical feasibility, financial viability, political viability and administrative operability) to be applied at the design stage; phase two-concurrent (operational) implementation evaluation criteria to be applied during implementation of the new system; phase three-post-implementation evaluation criteria (classified as internal-quality of information; external-resources and managerial support; ultimate-systems impact) to be applied after operating the implemented system for at least 3 years. In designing a DHMIS model there is need to have built-in these three sets of evaluation criteria which should be used in a phased manner. Pre-implementation evaluation criteria should be used to evaluate the system's viability before more resources are committed to its implementation; concurrent (operational) implementation evaluation criteria should be used to ascertain the status of the on-going implementation with the view to either fine-tune or abandon it altogether before more resources are used on it; and post-implementation evaluation criteria should be used to assess its overall effectiveness (if it has achieved its hypothesized benefits) towards the management of DHS.

Some Relationships between Operativity and Reading Comprehension.

ERIC Educational Resources Information Center

Stack, Wesner Brown

Samples of 98 fourth graders and 111 sixth graders participated in a study of the relationships between operational thinking and reading comprehension of texts involving operational structures. Tests of operational thinking, reading comprehension, IQ, and vocabulary were administered in class groups. Results from correlational and factor analyses…

Zebrafish Housing Systems: A Review of Basic Operating Principles and Considerations for Design and Functionality

PubMed Central

Lawrence, Christian; Mason, Timothy

2015-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations. PMID:23382349

NDARC - NASA Design and Analysis of Rotorcraft Validation and Demonstration

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2010-01-01

Validation and demonstration results from the development of the conceptual design tool NDARC (NASA Design and Analysis of Rotorcraft) are presented. The principal tasks of NDARC are to design a rotorcraft to satisfy specified design conditions and missions, and then analyze the performance of the aircraft for a set of off-design missions and point operating conditions. The aircraft chosen as NDARC development test cases are the UH-60A single main-rotor and tail-rotor helicopter, the CH-47D tandem helicopter, the XH-59A coaxial lift-offset helicopter, and the XV-15 tiltrotor. These aircraft were selected because flight performance data, a weight statement, detailed geometry information, and a correlated comprehensive analysis model are available for each. Validation consists of developing the NDARC models for these aircraft by using geometry and weight information, airframe wind tunnel test data, engine decks, rotor performance tests, and comprehensive analysis results; and then comparing the NDARC results for aircraft and component performance with flight test data. Based on the calibrated models, the capability of the code to size rotorcraft is explored.

The importance of operations, risk, and cost assessment to space transfer systems design

NASA Technical Reports Server (NTRS)

Ball, J. M.; Komerska, R. J.; Rowell, L. F.

1992-01-01

This paper examines several methodologies which contribute to comprehensive subsystem cost estimation. The example of a space-based lunar space transfer vehicle (STV) design is used to illustrate how including both primary and secondary factors into cost affects the decision of whether to use aerobraking or propulsion for earth orbit capture upon lunar return. The expected dominant cost factor in this decision is earth-to-orbit launch cost driven by STV mass. However, to quantify other significant cost factors, this cost comparison included a risk analysis to identify development and testing costs, a Taguchi design of experiments to determine a minimum mass aerobrake design, and a detailed operations analysis. As a result, the predicted cost advantage of aerobraking, while still positive, was subsequently reduced by about 30 percent compared to the simpler mass-based cost estimates.

[A new teaching mode improves the effect of comprehensive experimental teaching of genetics].

PubMed

Fenghua, He; Jieqiang, Li; Biyan, Zhu; Feng, Gao

2015-04-01

To improve the research atmosphere in genetics experimental teaching and develop students' creativity in research, we carried out a reform in comprehensive experimental teaching which is one of important modules for genetics practice. In our new student-centered teaching mode, they chose research topics, performed experiments and took innovative approaches independently. With the open laboratory and technical platform in our experimental teaching center, students finished their experiments and were required to write a mini-research article. Comprehensive experimental teaching is a scientific research practice before they complete their thesis. Through this teaching practice, students' research skills in experimental design and operation, data analysis and results presentation, as well as their collaboration spirit and innovation consciousness are strengthened.

Automobile Engine: Basic Ignition Timing. Fordson Bilingual Demonstration Project.

ERIC Educational Resources Information Center

Vick, James E.

These two vocational instructional modules on basic automobile ignition timing and on engine operation, four-stroke cycle, are two of eight such modules designed to assist recently arrived Arab students, limited in English proficiency (LEP), in critical instructional areas in a comprehensive high school. Goal stated for this module is for the…

Learning Fire Weather--A Self-Study Course.

ERIC Educational Resources Information Center

Taylor, Bernadine A.

This self-study course was prepared specifically to be used with the United States Department of Agriculture (USDA) Agriculture Handbook 360, FIRE WEATHER...A GUIDE FOR APPLICATION OF METEOROLOGICAL INFORMATION TO FOREST FIRE CONTROL OPERATIONS. It is designed not only to let the reader determine his comprehension of the text but also to develop…

78 FR 57651 - Habitat Conservation Plan for the Community of Los Osos, San Luis Obispo County, CA; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

..., management, maintenance, and monitoring of conservation lands used to mitigate the effects of the other.... The LOHCP is a comprehensive plan designed to provide long-term conservation and management of... Maintenance: Public and private utility company activities to operate and maintain, including repair and...

A COMPREHENSIVE NONPOINT SOURCE FIELD STUDY FOR SEDIMENT, NUTRIENTS, AND PATHOGENS IN THE SOUTH FORK BROAD RIVER WATERSHED IN NORTHEAST GEORGIA

EPA Science Inventory

This technical report provides a description of the field project design, quality control, the sampling protocols and analysis methodology used, and standard operating procedures for the South Fork Broad River Watershed (SFBR) Total Maximum Daily Load (TMDL) project. This watersh...

Connected Vehicle Pilot Deployment Program phase 1 : comprehensive deployment plan : New York City : volume 1 : technical application : part I : technical and management approach.

DOT National Transportation Integrated Search

2016-08-01

This document describes the Deployment Plan for the New York City Department of Transportation (NYC) Connected Vehicle Pilot Deployment (CVPD) Project. This plan describes the approach to complete Phase 2 Design/Build/Test, and Phase 3 Operate and Ma...

Pragmatic Divestment of KC-135 Navigators in the Special Operations Air Refueling Mission

DTIC Science & Technology

2015-03-26

publicly expressed opinions, and the bandwagon effect of majority opinion. This technique replaces direct debate by a carefully designed program of... effective , comprehensive solution. Ultimately, the panel of experts arrived at conclusions supporting the hypothesis that navigator divestment and SOAR...manpower, personnel, and training effects after navigators are phased out

How to Operate Your Day Care Program.

ERIC Educational Resources Information Center

Jones (Ryan) Associates, Inc., Wyomissing, PA.

Originally written to assist communities in Pennsylvania in the design and implementation of comprehensive child development day care programs to meet Federal Inter-Agency guidelines, this manual is geared to the specific needs of the administrator and is equally valuable for any program, large or small, public or private. Section I is on the…

Practical Application of PRA as an Integrated Design Tool for Space Systems

NASA Technical Reports Server (NTRS)

Kalia, Prince; Shi, Ying; Pair, Robin; Quaney, Virginia; Uhlenbrock, John

2013-01-01

This paper presents the application of the first comprehensive Probabilistic Risk Assessment (PRA) during the design phase of a joint NASA/NOAA weather satellite program, Geostationary Operational Environmental Satellite Series R (GOES-R). GOES-R is the next generation weather satellite primarily to help understand the weather and help save human lives. PRA has been used at NASA for Human Space Flight for many years. PRA was initially adopted and implemented in the operational phase of manned space flight programs and more recently for the next generation human space systems. Since its first use at NASA, PRA has become recognized throughout the Agency as a method of assessing complex mission risks as part of an overall approach to assuring safety and mission success throughout project lifecycles. PRA is now included as a requirement during the design phase of both NASA next generation manned space vehicles as well as for high priority robotic missions. The influence of PRA on GOES-R design and operation concepts are discussed in detail. The GOES-R PRA is unique at NASA for its early implementation. It also represents a pioneering effort to integrate risks from both Spacecraft (SC) and Ground Segment (GS) to fully assess the probability of achieving mission objectives. PRA analysts were actively involved in system engineering and design engineering to ensure that a comprehensive set of technical risks were correctly identified and properly understood from a design and operations perspective. The analysis included an assessment of SC hardware and software, SC fault management system, GS hardware and software, common cause failures, human error, natural hazards, solar weather and infrastructure (such as network and telecommunications failures, fire). PRA findings directly resulted in design changes to reduce SC risk from micro-meteoroids. PRA results also led to design changes in several SC subsystems, e.g. propulsion, guidance, navigation and control (GNC), communications, mechanisms, and command and data handling (C&DH). The fault tree approach assisted in the development of the fault management system design. Human error analysis, which examined human response to failure, indicated areas where automation could reduce the overall probability of gaps in operation by half. In addition, the PRA brought to light many potential root causes of system disruptions, including earthquakes, inclement weather, solar storms, blackouts and other extreme conditions not considered in the typical reliability and availability analyses. Ultimately the PRA served to identify potential failures that, when mitigated, resulted in a more robust design, as well as to influence the program's concept of operations. The early and active integration of PRA with system and design engineering provided a well-managed approach for risk assessment that increased reliability and availability, optimized lifecyc1e costs, and unified the SC and GS developments.

Uncertainty-based Optimization Algorithms in Designing Fractionated Spacecraft

PubMed Central

Ning, Xin; Yuan, Jianping; Yue, Xiaokui

2016-01-01

A fractionated spacecraft is an innovative application of a distributive space system. To fully understand the impact of various uncertainties on its development, launch and in-orbit operation, we use the stochastic missioncycle cost to comprehensively evaluate the survivability, flexibility, reliability and economy of the ways of dividing the various modules of the different configurations of fractionated spacecraft. We systematically describe its concept and then analyze its evaluation and optimal design method that exists during recent years and propose the stochastic missioncycle cost for comprehensive evaluation. We also establish the models of the costs such as module development, launch and deployment and the impacts of their uncertainties respectively. Finally, we carry out the Monte Carlo simulation of the complete missioncycle costs of various configurations of the fractionated spacecraft under various uncertainties and give and compare the probability density distribution and statistical characteristics of its stochastic missioncycle cost, using the two strategies of timing module replacement and non-timing module replacement. The simulation results verify the effectiveness of the comprehensive evaluation method and show that our evaluation method can comprehensively evaluate the adaptability of the fractionated spacecraft under different technical and mission conditions. PMID:26964755

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, Steven Karl; Day, Christy M.; Determan, John C.

LANL has developed a process to generate a progressive family of system models for a fissile solution system. This family includes a dynamic system simulation comprised of coupled nonlinear differential equations describing the time evolution of the system. Neutron kinetics, radiolytic gas generation and transport, and core thermal hydraulics are included in the DSS. Extensions to explicit operation of cooling loops and radiolytic gas handling are embedded in these systems as is a stability model. The DSS may then be converted to an implementation in Visual Studio to provide a design team the ability to rapidly estimate system performance impactsmore » from a variety of design decisions. This provides a method to assist in optimization of the system design. Once design has been generated in some detail the C++ version of the system model may then be implemented in a LabVIEW user interface to evaluate operator controls and instrumentation and operator recognition and response to off-normal events. Taken as a set of system models the DSS, Visual Studio, and LabVIEW progression provides a comprehensive set of design support tools.« less

The Development of Project Orion Ground Safety Requirements

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul; Condzella, Bill; Williams, Jeff

2011-01-01

In spite of a very compressed schedule, Project Orion's AFT safety team was able to pull together a comprehensive set of ground safety requirements using existing requirements and subject matter experts. These requirements will serve as the basis for the design of GSE and ground operations. Using the above lessons as a roadmap, new Projects can produce the same results. A rigorous set of ground safety requirements is required to assure ground support equipment (GSE) and associated flight hardware ground operations are conducted safety

Computational analysis of aircraft pressure relief doors

NASA Astrophysics Data System (ADS)

Schott, Tyler

Modern trends in commercial aircraft design have sought to improve fuel efficiency while reducing emissions by operating at higher pressures and temperatures than ever before. Consequently, greater demands are placed on the auxiliary bleed air systems used for a multitude of aircraft operations. The increased role of bleed air systems poses significant challenges for the pressure relief system to ensure the safe and reliable operation of the aircraft. The core compartment pressure relief door (PRD) is an essential component of the pressure relief system which functions to relieve internal pressure in the core casing of a high-bypass turbofan engine during a burst duct over-pressurization event. The successful modeling and analysis of a burst duct event are imperative to the design and development of PRD's to ensure that they will meet the increased demands placed on the pressure relief system. Leveraging high-performance computing coupled with advances in computational analysis, this thesis focuses on a comprehensive computational fluid dynamics (CFD) study to characterize turbulent flow dynamics and quantify the performance of a core compartment PRD across a range of operating conditions and geometric configurations. The CFD analysis was based on a compressible, steady-state, three-dimensional, Reynolds-averaged Navier-Stokes approach. Simulations were analyzed, and results show that variations in freestream conditions, plenum environment, and geometric configurations have a non-linear impact on the discharge, moment, thrust, and surface temperature characteristics. The CFD study revealed that the underlying physics for this behavior is explained by the interaction of vortices, jets, and shockwaves. This thesis research is innovative and provides a comprehensive and detailed analysis of existing and novel PRD geometries over a range of realistic operating conditions representative of a burst duct over-pressurization event. Further, the study provides aircraft manufacturers with valuable insight into the impact that operating conditions and geometric configurations have on PRD performance and how the information can be used to assist future research and development of PRD design.

Usability assessment of an electronic health record in a comprehensive dental clinic.

PubMed

Suebnukarn, Siriwan; Rittipakorn, Pawornwan; Thongyoi, Budsara; Boonpitak, Kwanwong; Wongsapai, Mansuang; Pakdeesan, Panu

2013-12-01

In this paper we present the development and usability of an electronic health record (EHR) system in a comprehensive dental clinic.The graphic user interface of the system was designed to consider the concept of cognitive ergonomics.The cognitive task analysis was used to evaluate the user interface of the EHR by identifying all sub-tasks and classifying them into mental or physical operators, and to predict task execution time required to perform the given task. We randomly selected 30 cases that had oral examinations for routine clinical care in a comprehensive dental clinic. The results were based on the analysis of 4 prototypical tasks performed by ten EHR users. The results showed that on average a user needed to go through 27 steps to complete all tasks for one case. To perform all 4 tasks of 30 cases, they spent about 91 min (independent of system response time) for data entry, of which 51.8 min were spent on more effortful mental operators. In conclusion, the user interface can be improved by reducing the percentage of mental effort required for the tasks.

Creating a Roadmap for Delivering Gender-sensitive Comprehensive Care for Women Veterans

PubMed Central

deKleijn, Miriam; Lagro-Janssen, Antoine L.M.; Canelo, Ismelda

2015-01-01

Background: Women Veterans are a significant minority of users of the VA healthcare system, limiting provider and staff experience meeting their needs in environments historically designed for men. The VA is nonetheless committed to ensuring that women Veterans have access to comprehensive care in environments sensitive to their needs. Objectives: We sought to determine what aspects of care need to be tailored to the needs of women Veterans in order for the VA to deliver gender-sensitive comprehensive care. Research Design: Modified Delphi expert panel process. Subjects: Eleven clinicians and social scientists with expertise in women’s health, primary care, and mental health. Measures: Importance of tailoring over 100 discrete aspects of care derived from the Institute of Medicine’s definition of comprehensive care and literature-based domains of sex-sensitive care on a 5-point scale. Results: Panelists rated over half of the aspects of care as very-to-extremely important (median score 4+) to tailor to the needs of women Veterans. The panel arrived at 14 priority recommendations that broadly encompassed the importance of (1) the design/delivery of services sensitive to trauma histories, (2) adapting to women’s preferences and information needs, and (3) sex awareness and cultural transformation in every facet of VA operations. Conclusions: We used expert panel methods to arrive at consensus on top priority recommendations for improving delivery of sex-sensitive comprehensive care in VA settings. Accomplishment of their breadth will require national, regional, and local strategic action and multilevel stakeholder engagement, and will support VA’s national efforts at improving customer service for all Veterans. PMID:25767971

Surface electrical properties experiment, part 1. [for measuring lunar surface electrical properties

NASA Technical Reports Server (NTRS)

Kupfer, W. S. (Compiler)

1973-01-01

The design evolution, hardware development, and production history of the surface electrical properties (SEP) experiment are discussed. The SEP transmitter and receiver were designed to be used on the lunar surface during the Apollo 17 mission. The equipment was used to measure lunar surface electrical properties over traverses totalling more than 8 kilometers, for a duration of more than 100 minutes. A comprehensive outline of the techniques, is given along with a simplified detailed breakdown of equipment description and function to outline the principles of operation. A history of the design evolution with trade-off criteria and emphasis on changes caused by decisions reached in solving problems inherent in a fast-paced development program are presented from the viewpoint of overall design concept and in detail for each item of deliverable hardware. There is a brief account of lunar operations.

Android Protection Mechanism: A Signed Code Security Mechanism for Smartphone Applications

DTIC Science & Technology

2011-03-01

status registers, exceptions, endian support, unaligned access support, synchronization primitives , the Jazelle Extension, and saturated integer...supports comprehensive non-blocking shared-memory synchronization primitives that scale for multiple-processor system designs. This is an improvement... synchronization . Memory semaphores can be loaded and altered without interruption because the load and store operations are atomic. Processor

TRANSPORT AND FATE OF NITRATE AND PATHOGENS AT A DAIRY LAGOON WATER APPLICATION SITE: AN ASSESSMENT OF CNMP PERFORMANCE (GWERD IAG WITH USDA-ARS, #TDB)

EPA Science Inventory

EPA currently requires that application of Concentrated Animal Feeding Operation (CAFO) wastes to agricultural fields follows a Comprehensive Nutrient Management Plan (CNMP). The tacit assumption is that a well designed and executed CNMP ensures that all lagoon water contaminants...

Designs of Concept Maps and Their Impacts on Readers' Performance in Memory and Reasoning while Reading

ERIC Educational Resources Information Center

Tzeng, Jeng-Yi

2010-01-01

From the perspective of the Fuzzy Trace Theory, this study investigated the impacts of concept maps with two strategic orientations (comprehensive and thematic representations) on readers' performance of cognitive operations (such as perception, verbatim memory, gist reasoning and syntheses) while the readers were reading two history articles that…

Funding Lutheran Elementary Schools. Planning for Lutheran Elementary Schools. E09.

ERIC Educational Resources Information Center

Lutheran Church, Missouri Synod, St. Louis, MO.

Part of a 13-volume series designed to help Lutheran communities assess the feasibility of starting a Lutheran elementary school and to assist ongoing schools in current operation, this handbook focuses on financial support for Lutheran schools. It attempts to present a comprehensive description of factors to be considered in funding a Lutheran…

Head Start Program Regulations and Program Guidance for Parts 1304 and 1308. Revised.

ERIC Educational Resources Information Center

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

Head Start and Early Head Start are comprehensive child development programs providing services to children from birth to age 5, pregnant women, and their families. The Head Start Program Performance Standards, mandatory regulations that grantees and delegate agencies must implement in order to operate a Head Start program, are designed to ensure…

Predicting Employment Outcomes of Consumers of State-Operated Comprehensive Rehabilitation Centers

ERIC Educational Resources Information Center

Beach, David Thomas

2009-01-01

This study used records from a state-operated comprehensive rehabilitation center to investigate possible predictive factors related to completing comprehensive rehabilitation center programs and successful vocational rehabilitation (VR) case closure. An analysis of demographic data of randomly selected comprehensive rehabilitation center…

The development of a test methodology for the evaluation of EVA gloves

NASA Technical Reports Server (NTRS)

O'Hara, John M.; Cleland, John; Winfield, Dan

1988-01-01

This paper describes the development of a standardized set of tests designed to assess EVA-gloved hand capabilities in six measurement domains: range of motion, strength, tactile perception, dexterity, fatigue, and comfort. Based upon an assessment of general human-hand functioning and EVA task requirements, several tests within each measurement domain were developed to provide a comprehensive evaluation. All tests were designed to be conducted in a glove box with the bare hand as a baseline and the EVA glove at operating pressure.

Human factors research problems in electronic voice warning system design

NASA Technical Reports Server (NTRS)

Simpson, C. A.; Williams, D. H.

1975-01-01

The speech messages issued by voice warning systems must be carefully designed in accordance with general principles of human decision making processes, human speech comprehension, and the conditions in which the warnings can occur. The operator's effectiveness must not be degraded by messages that are either inappropriate or difficult to comprehend. Important experimental variables include message content, linguistic redundancy, signal/noise ratio, interference with concurrent tasks, and listener expectations generated by the pragmatic or real world context in which the messages are presented.

RF power harvesting: a review on designing methodologies and applications

NASA Astrophysics Data System (ADS)

Tran, Le-Giang; Cha, Hyouk-Kyu; Park, Woo-Tae

2017-12-01

Wireless power transmission was conceptualized nearly a century ago. Certain achievements made to date have made power harvesting a reality, capable of providing alternative sources of energy. This review provides a summ ary of radio frequency (RF) power harvesting technologies in order to serve as a guide for the design of RF energy harvesting units. Since energy harvesting circuits are designed to operate with relatively small voltages and currents, they rely on state-of-the-art electrical technology for obtaining high efficiency. Thus, comprehensive analysis and discussions of various designs and their tradeoffs are included. Finally, recent applications of RF power harvesting are outlined.

Assessment of Offshore Wind System Design, Safety, and Operation Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sirnivas, Senu; Musial, Walt; Bailey, Bruce

This report is a deliverable for a project sponsored by the U.S. Department of Energy (DOE) entitled National Offshore Wind Energy Resource and Design Data Campaign -- Analysis and Collaboration (contract number DE-EE0005372; prime contractor -- AWS Truepower). The project objective is to supplement, facilitate, and enhance ongoing multiagency efforts to develop an integrated national offshore wind energy data network. The results of this initiative are intended to 1) produce a comprehensive definition of relevant met-ocean resource assets and needs and design standards, and 2) provide a basis for recommendations for meeting offshore wind energy industry data and design certificationmore » requirements.« less

Data Processing System (DPS) software with experimental design, statistical analysis and data mining developed for use in entomological research.

PubMed

Tang, Qi-Yi; Zhang, Chuan-Xi

2013-04-01

A comprehensive but simple-to-use software package called DPS (Data Processing System) has been developed to execute a range of standard numerical analyses and operations used in experimental design, statistics and data mining. This program runs on standard Windows computers. Many of the functions are specific to entomological and other biological research and are not found in standard statistical software. This paper presents applications of DPS to experimental design, statistical analysis and data mining in entomology. © 2012 The Authors Insect Science © 2012 Institute of Zoology, Chinese Academy of Sciences.

ART/Ada design project, phase 1

NASA Technical Reports Server (NTRS)

1989-01-01

An Ada-Based Expert System Building Tool Design Research Project was conducted. The goal was to investigate various issues in the context of the design of an Ada-based expert system building tool. An attempt was made to achieve a comprehensive understanding of the potential for embedding expert systems in Ada systems for eventual application in future projects. The current status of the project is described by introducing an operational prototype, ART/Ada. How the project was conducted is explained. The performance of the prototype is analyzed and compared with other related works. Future research directions are suggested.

MPD3: a useful medicinal plants database for drug designing.

PubMed

Mumtaz, Arooj; Ashfaq, Usman Ali; Ul Qamar, Muhammad Tahir; Anwar, Farooq; Gulzar, Faisal; Ali, Muhammad Amjad; Saari, Nazamid; Pervez, Muhammad Tariq

2017-06-01

Medicinal plants are the main natural pools for the discovery and development of new drugs. In the modern era of computer-aided drug designing (CADD), there is need of prompt efforts to design and construct useful database management system that allows proper data storage, retrieval and management with user-friendly interface. An inclusive database having information about classification, activity and ready-to-dock library of medicinal plant's phytochemicals is therefore required to assist the researchers in the field of CADD. The present work was designed to merge activities of phytochemicals from medicinal plants, their targets and literature references into a single comprehensive database named as Medicinal Plants Database for Drug Designing (MPD3). The newly designed online and downloadable MPD3 contains information about more than 5000 phytochemicals from around 1000 medicinal plants with 80 different activities, more than 900 literature references and 200 plus targets. The designed database is deemed to be very useful for the researchers who are engaged in medicinal plants research, CADD and drug discovery/development with ease of operation and increased efficiency. The designed MPD3 is a comprehensive database which provides most of the information related to the medicinal plants at a single platform. MPD3 is freely available at: http://bioinform.info .

Improving workplace productivity--it isn't just about reducing absence.

PubMed

Harte, Kathy; Mahieu, Kathleen; Mallett, David; Norville, Julie; VanderWerf, Sander

2011-01-01

Employers must get more aggressive in their health and productivity strategies. A comprehensive strategy includes data analytics across health and lost-time programs, absence policies that meet today's needs for both employer and employee, health and wellness programs targeting modifiable health behaviors, and absence program administration that is aligned to operational goals. This article targets key aspects of a comprehensive long-term health and productivity strategic vision. An organization can use these aspects independently to address immediate tactical issues while it develops its broader strategy. The target areas include a view from the perspective of data management, absence program design and management, employee health and wellness, and behavioral health.

Safer Liquid Natural Gas

NASA Technical Reports Server (NTRS)

1976-01-01

After the disaster of Staten Island in 1973 where 40 people were killed repairing a liquid natural gas storage tank, the New York Fire Commissioner requested NASA's help in drawing up a comprehensive plan to cover the design, construction, and operation of liquid natural gas facilities. Two programs are underway. The first transfers comprehensive risk management techniques and procedures which take the form of an instruction document that includes determining liquid-gas risks through engineering analysis and tests, controlling these risks by setting up redundant fail safe techniques, and establishing criteria calling for decisions that eliminate or accept certain risks. The second program prepares a liquid gas safety manual (the first of its kind).

A Mixed Methods Program Evaluation on the Effectiveness of a School Redesign Model on Teacher Empowerment and Student Achievement

ERIC Educational Resources Information Center

Costa, Ann Marie

2012-01-01

A recent law in a New England state allowed public schools to operate with increased flexibility and autonomy through the authorization of the creation of Innovation Schools. This project study, a program evaluation using a convergent parallel mixed methods research design, allowed for a comprehensive evaluation of the first Innovation School…

Performance characterization of active fiber-composite actuators for helicopter rotor blade applications

NASA Astrophysics Data System (ADS)

Wickramasinghe, Viresh K.; Hagood, Nesbitt W.

2002-07-01

The primary objective of this work was to characterize the performance of the Active Fiber Composite (AFC) actuator material system for the Boeing Active Material Rotor (AMR) blade application. The AFCs were a new structural actuator system consisting of piezoceramic fibers embedded in an epoxy matrix and sandwiched between interdigitated electrodes to orient the driving electric field in the fiber direction to use the primary piezoelectric effect. These actuators were integrated directly into the blade spar laminate as active plies within the composite structure to perform structural actuation for vibration control in helicopters. Therefore, it was necessary to conduct extensive electromechanical material characterization to evaluate AFCs both as actuators and as structural components of the rotor blade. The characterization tests designed to extract important electromechanical properties under simulated blade operating conditions included stress-strain tests, free strain tests and actuation under tensile load tests. This paper presents the test results as well as the comprehensive testing process developed to evaluate the relevant AFC material properties. The results from this comprehensive performance characterization of the AFC material system supported the design and operation of the Boeing AMR blade scheduled for hover and forward flight wind tunnel tests.

Feasibility study, software design, layout and simulation of a two-dimensional fast Fourier transform machine for use in optical array interferometry

NASA Technical Reports Server (NTRS)

Boriakoff, Valentin; Chen, Wei

1990-01-01

The NASA-Cornell Univ.-Worcester Polytechnic Institute Fast Fourier Transform (FFT) chip based on the architecture of the systolic FFT computation as presented by Boriakoff is implemented into an operating device design. The kernel of the system, a systolic inner product floating point processor, was designed to be assembled into a systolic network that would take incoming data streams in pipeline fashion and provide an FFT output at the same rate, word by word. It was thoroughly simulated for proper operation, and it has passed a comprehensive set of tests showing no operational errors. The black box specifications of the chip, which conform to the initial requirements of the design as specified by NASA, are given. The five subcells are described and their high level function description, logic diagrams, and simulation results are presented. Some modification of the Read Only Memory (ROM) design were made, since some errors were found in it. Because a four stage pipeline structure was used, simulating such a structure is more difficult than an ordinary structure. Simulation methods are discussed. Chip signal protocols and chip pinout are explained.

Semi-Immersive Virtual Turbine Engine Simulation System

NASA Astrophysics Data System (ADS)

Abidi, Mustufa H.; Al-Ahmari, Abdulrahman M.; Ahmad, Ali; Darmoul, Saber; Ameen, Wadea

2018-05-01

The design and verification of assembly operations is essential for planning product production operations. Recently, virtual prototyping has witnessed tremendous progress, and has reached a stage where current environments enable rich and multi-modal interaction between designers and models through stereoscopic visuals, surround sound, and haptic feedback. The benefits of building and using Virtual Reality (VR) models in assembly process verification are discussed in this paper. In this paper, we present the virtual assembly (VA) of an aircraft turbine engine. The assembly parts and sequences are explained using a virtual reality design system. The system enables stereoscopic visuals, surround sounds, and ample and intuitive interaction with developed models. A special software architecture is suggested to describe the assembly parts and assembly sequence in VR. A collision detection mechanism is employed that provides visual feedback to check the interference between components. The system is tested for virtual prototype and assembly sequencing of a turbine engine. We show that the developed system is comprehensive in terms of VR feedback mechanisms, which include visual, auditory, tactile, as well as force feedback. The system is shown to be effective and efficient for validating the design of assembly, part design, and operations planning.

Analysis of Advanced Rotorcraft Configurations

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2000-01-01

Advanced rotorcraft configurations are being investigated with the objectives of identifying vehicles that are larger, quieter, and faster than current-generation rotorcraft. A large rotorcraft, carrying perhaps 150 passengers, could do much to alleviate airport capacity limitations, and a quiet rotorcraft is essential for community acceptance of the benefits of VTOL operations. A fast, long-range, long-endurance rotorcraft, notably the tilt-rotor configuration, will improve rotorcraft economics through productivity increases. A major part of the investigation of advanced rotorcraft configurations consists of conducting comprehensive analyses of vehicle behavior for the purpose of assessing vehicle potential and feasibility, as well as to establish the analytical models required to support the vehicle development. The analytical work of FY99 included applications to tilt-rotor aircraft. Tilt Rotor Aeroacoustic Model (TRAM) wind tunnel measurements are being compared with calculations performed by using the comprehensive analysis tool (Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD 11)). The objective is to establish the wing and wake aerodynamic models that are required for tilt-rotor analysis and design. The TRAM test in the German-Dutch Wind Tunnel (DNW) produced extensive measurements. This is the first test to encompass air loads, performance, and structural load measurements on tilt rotors, as well as acoustic and flow visualization data. The correlation of measurements and calculations includes helicopter-mode operation (performance, air loads, and blade structural loads), hover (performance and air loads), and airplane-mode operation (performance).

Towards a consensus on a hearing preservation classification system.

PubMed

Skarzynski, Henryk; van de Heyning, P; Agrawal, S; Arauz, S L; Atlas, M; Baumgartner, W; Caversaccio, M; de Bodt, M; Gavilan, J; Godey, B; Green, K; Gstoettner, W; Hagen, R; Han, D M; Kameswaran, M; Karltorp, E; Kompis, M; Kuzovkov, V; Lassaletta, L; Levevre, F; Li, Y; Manikoth, M; Martin, J; Mlynski, R; Mueller, J; O'Driscoll, M; Parnes, L; Prentiss, S; Pulibalathingal, S; Raine, C H; Rajan, G; Rajeswaran, R; Rivas, J A; Rivas, A; Skarzynski, P H; Sprinzl, G; Staecker, H; Stephan, K; Usami, S; Yanov, Y; Zernotti, M E; Zimmermann, K; Lorens, A; Mertens, G

2013-01-01

The comprehensive Hearing Preservation classification system presented in this paper is suitable for use for all cochlear implant users with measurable pre-operative residual hearing. If adopted as a universal reporting standard, as it was designed to be, it should prove highly beneficial by enabling future studies to quickly and easily compare the results of previous studies and meta-analyze their data. To develop a comprehensive Hearing Preservation classification system suitable for use for all cochlear implant users with measurable pre-operative residual hearing. The HEARRING group discussed and reviewed a number of different propositions of a HP classification systems and reviewed critical appraisals to develop a qualitative system in accordance with the prerequisites. The Hearing Preservation Classification System proposed herein fulfills the following necessary criteria: 1) classification is independent from users' initial hearing, 2) it is appropriate for all cochlear implant users with measurable pre-operative residual hearing, 3) it covers the whole range of pure tone average from 0 to 120 dB; 4) it is easy to use and easy to understand.

Analog design optimization methodology for ultralow-power circuits using intuitive inversion-level and saturation-level parameters

NASA Astrophysics Data System (ADS)

Eimori, Takahisa; Anami, Kenji; Yoshimatsu, Norifumi; Hasebe, Tetsuya; Murakami, Kazuaki

2014-01-01

A comprehensive design optimization methodology using intuitive nondimensional parameters of inversion-level and saturation-level is proposed, especially for ultralow-power, low-voltage, and high-performance analog circuits with mixed strong, moderate, and weak inversion metal-oxide-semiconductor transistor (MOST) operations. This methodology is based on the synthesized charge-based MOST model composed of Enz-Krummenacher-Vittoz (EKV) basic concepts and advanced-compact-model (ACM) physics-based equations. The key concept of this methodology is that all circuit and system characteristics are described as some multivariate functions of inversion-level parameters, where the inversion level is used as an independent variable representative of each MOST. The analog circuit design starts from the first step of inversion-level design using universal characteristics expressed by circuit currents and inversion-level parameters without process-dependent parameters, followed by the second step of foundry-process-dependent design and the last step of verification using saturation-level criteria. This methodology also paves the way to an intuitive and comprehensive design approach for many kinds of analog circuit specifications by optimization using inversion-level log-scale diagrams and saturation-level criteria. In this paper, we introduce an example of our design methodology for a two-stage Miller amplifier.

A Comprehensive Review of Permanent Magnet Transverse Flux Machines for Direct Drive Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard; Husain, Tausif; Hasan, Iftekhar

The use of direct drive machines in renewable and industrial applications are increasing at a rapid rate. Transverse flux machines (TFM) are ideally suited for direct drive applications due to their high torque density. In this paper, a comprehensive review of the permanent magnet (PM) TFMs for direct drive applications is presented. The paper introduces TFMs and their operating principle and then reviews the different type of TFMs proposed in the literature. The TFMs are categorized according to the number of stator sides, types of stator cores and magnet arrangement in the rotor. The review covers different design topologies, materialsmore » used for manufacturing, structural and thermal analysis, modeling and design optimization and cogging torque minimization in TFMs. The paper also reviews various applications and comparisons for TFMs that have been presented in the literature.« less

Operating manual for coaxial injection combustion model. [for the space shuttle main engine

NASA Technical Reports Server (NTRS)

Sutton, R. D.; Schuman, M. D.; Chadwick, W. D.

1974-01-01

An operating manual for the coaxial injection combustion model (CICM) is presented as the final report for an eleven month effort designed to provide improvement, to verify, and to document the comprehensive computer program for analyzing the performance of thrust chamber operation with gas/liquid coaxial jet injection. The effort culminated in delivery of an operation FORTRAN IV computer program and associated documentation pertaining to the combustion conditions in the space shuttle main engine. The computer program is structured for compatibility with the standardized Joint Army-Navy-NASA-Air Force (JANNAF) performance evaluation procedure. Use of the CICM in conjunction with the JANNAF procedure allows the analysis of engine systems using coaxial gas/liquid injection.

Comprehension of Spacecraft Telemetry Using Hierarchical Specifications of Behavior

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Joshi, Rajeev

2014-01-01

A key challenge in operating remote spacecraft is that ground operators must rely on the limited visibility available through spacecraft telemetry in order to assess spacecraft health and operational status. We describe a tool for processing spacecraft telemetry that allows ground operators to impose structure on received telemetry in order to achieve a better comprehension of system state. A key element of our approach is the design of a domain-specific language that allows operators to express models of expected system behavior using partial specifications. The language allows behavior specifications with data fields, similar to other recent runtime verification systems. What is notable about our approach is the ability to develop hierarchical specifications of behavior. The language is implemented as an internal DSL in the Scala programming language that synthesizes rules from patterns of specification behavior. The rules are automatically applied to received telemetry and the inferred behaviors are available to ground operators using a visualization interface that makes it easier to understand and track spacecraft state. We describe initial results from applying our tool to telemetry received from the Curiosity rover currently roving the surface of Mars, where the visualizations are being used to trend subsystem behaviors, in order to identify potential problems before they happen. However, the technology is completely general and can be applied to any system that generates telemetry such as event logs.

Adavanced RTG and thermoelectric materials study

NASA Technical Reports Server (NTRS)

Eggers, P. E.

1971-01-01

A comprehensive, generalized two-dimensional RTG analysis computer program was developed. This program is capable of analyzing any specified RTG design under a wide range of transient as well as steady-state operating conditions. The feasibility of a new concept for the design of segmented (or single-phase) thermoelectric couples was demonstrated. A SiGe-PbTe segmented couple involving pressure contacted junctions at the intermediate- and hot-junction temperatures was successfully encapsulated in a hermetically sealed bellows enclosure. This bellows-encapsulated couple was operated between a hot- and cold-junction temperature of 1200 K and 450 K, respectively, with a measured energy conversion efficiency of 7.6 + or - .5 per cent. An experimental study of selected sublimation barrier schemes revealed that a significant reduction in the sublimation rate of p-type PbTe could be achieved by using multiple layers of SiO2 fibers. A comparison of the barrier effectiveness is given for three different barrier designs.

An R package for the design, analysis and operation of reservoir systems

NASA Astrophysics Data System (ADS)

Turner, Sean; Ng, Jia Yi; Galelli, Stefano

2016-04-01

We present a new R package - named "reservoir" - which has been designed for rapid and easy routing of runoff through storage. The package comprises well-established tools for capacity design (e.g., the sequent peak algorithm), performance analysis (storage-yield-reliability and reliability-resilience-vulnerability analysis) and release policy optimization (Stochastic Dynamic Programming). Operating rules can be optimized for water supply, flood control and amenity objectives, as well as for maximum hydropower production. Storage-depth-area relationships are in-built, allowing users to incorporate evaporation from the reservoir surface. We demonstrate the capabilities of the software for global studies using thousands of reservoirs from the Global Reservoir and Dam (GRanD) database fed by historical monthly inflow time series from a 0.5 degree gridded global runoff dataset. The package is freely available through the Comprehensive R Archive Network (CRAN).

Computer program to perform cost and weight analysis of transport aircraft. Volume 2: Technical volume

NASA Technical Reports Server (NTRS)

1973-01-01

An improved method for estimating aircraft weight and cost using a unique and fundamental approach was developed. The results of this study were integrated into a comprehensive digital computer program, which is intended for use at the preliminary design stage of aircraft development. The program provides a means of computing absolute values for weight and cost, and enables the user to perform trade studies with a sensitivity to detail design and overall structural arrangement. Both batch and interactive graphics modes of program operation are available.

Assessing Comprehension During Reading with the Reading Strategy Assessment Tool (RSAT)

PubMed Central

Magliano, Joseph P.; Millis, Keith K.; Levinstein, Irwin

2011-01-01

Comprehension emerges as the results of inference and strategic processes that support the construction of a coherent mental model for a text. However, the vast majority of comprehension skills tests adopt a format that does not afford an assessment of these processes as they operate during reading. This study assessed the viability of the Reading Strategy Assessment Tool (RSAT), which is an automated computer-based reading assessment designed to measure readers’ comprehension and spontaneous use of reading strategies while reading texts. In the tool, readers comprehend passages one sentence at a time, and are asked either an indirect (“What are your thoughts regarding your understanding of the sentence in the context of the passage?”) or direct (e.g., why X?) question after reading each pre-selected target sentence. The answers to the indirect questions are analyzed on the extent that they contain words associated with comprehension processes. The answers to direct questions are coded for the number of content words in common with an ideal answer, which is intended to be an assessment of emerging comprehension. In the study, the RSAT approach was shown to predict measures of comprehension comparable to standardized tests. The RSAT variables were also shown to correlate with human ratings. The results of this study constitute a “proof of concept” and demonstrate that it is possible to develop a comprehension skills assessment tool that assesses both comprehension and comprehension strategies. PMID:23901332

Head Start Program Performance Standards and Other Regulations (45 CFR Parts 1301, 1302, 1303, 1304 and Guidance, 1305, 1306, and 1308 and Guidance).

ERIC Educational Resources Information Center

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

Head Start and Early Head Start are comprehensive child development programs providing services to children from birth to age 5, pregnant women, and their families. The Head Start Program Performance Standards, mandatory regulations that grantees and delegate agencies must implement in order to operate a Head Start program, are designed to ensure…

Viking navigation

NASA Technical Reports Server (NTRS)

Oneil, W. J.; Rudd, R. P.; Farless, D. L.; Hildebrand, C. E.; Mitchell, R. T.; Rourke, K. H.; Euler, E. A.

1979-01-01

A comprehensive description of the navigation of the Viking spacecraft throughout their flight from Earth launch to Mars landing is given. The flight path design, actual inflight control, and postflight reconstruction are discussed in detail. The preflight analyses upon which the operational strategies and performance predictions were based are discussed. The inflight results are then discussed and compared with the preflight predictions and, finally, the results of any postflight analyses are presented.

Design and application of gas-gap heat switches

NASA Technical Reports Server (NTRS)

Chan, C. K.; Ross, R. G., Jr.

1990-01-01

Gas-gap heat switches can serve as an effective means of thermally disconnecting a standby cryocooler when the primary (operating) cooler is connected and vice versa. The final phase of the development and test of a cryogenic heat switch designed for loads ranging from 2 watts at 8 K, to 100 watts at 80 K are described. Achieved heat-switch on/off conductance ratio ranged from 11,000 at 8 K to 2200 at 80 K. A particularly challenging element of heat-switch design is achieving satisfactory operation when large temperatures differentials exist across the switch. A special series of tests and analyses was conducted and used in this Phase-2 activity to evaluate the developed switches for temperature differentials ranging up to 200 K. Problems encountered at the maximum levels are described and analyzed, and means of avoiding the problems in the future are presented. A comprehensive summary of the overall heat-switch design methodology is also presented with special emphasis on lessons learned over the course of the 4-year development effort.

Design and development of a Space Station proximity operations research and development mockup

NASA Technical Reports Server (NTRS)

Haines, Richard F.

1986-01-01

Proximity operations (Prox-Ops) on-orbit refers to all activities taking place within one km of the Space Station. Designing a Prox-Ops control station calls for a comprehensive systems approach which takes into account structural constraints, orbital dynamics including approach/departure flight paths, myriad human factors and other topics. This paper describes a reconfigurable full-scale mock-up of a Prox-Ops station constructed at Ames incorporating an array of windows (with dynamic star field, target vehicle(s), and head-up symbology), head-down perspective display of manned and unmanned vehicles, voice- actuated 'electronic checklist', computer-generated voice system, expert system (to help diagnose subsystem malfunctions), and other displays and controls. The facility is used for demonstrations of selected Prox-Ops approach scenarios, human factors research (work-load assessment, determining external vision envelope requirements, head-down and head-up symbology design, voice synthesis and recognition research, etc.) and development of engineering design guidelines for future module interiors.

A real-time hybrid neuron network for highly parallel cognitive systems.

PubMed

Christiaanse, Gerrit Jan; Zjajo, Amir; Galuzzi, Carlo; van Leuken, Rene

2016-08-01

For comprehensive understanding of how neurons communicate with each other, new tools need to be developed that can accurately mimic the behaviour of such neurons and neuron networks under `real-time' constraints. In this paper, we propose an easily customisable, highly pipelined, neuron network design, which executes optimally scheduled floating-point operations for maximal amount of biophysically plausible neurons per FPGA family type. To reduce the required amount of resources without adverse effect on the calculation latency, a single exponent instance is used for multiple neuron calculation operations. Experimental results indicate that the proposed network design allows the simulation of up to 1188 neurons on Virtex7 (XC7VX550T) device in brain real-time yielding a speed-up of x12.4 compared to the state-of-the art.

Verifying the operational set-up of a radionuclide air-monitoring station.

PubMed

Werzi, R; Padoani, F

2007-05-01

A worldwide radionuclide network of 80 stations, part of the International Monitoring System, was designed to monitor compliance with the Comprehensive Nuclear-Test-Ban Treaty. After installation, the stations are certified to comply with the minimum requirements laid down by the Preparatory Commission of the Comprehensive Nuclear-Test-Ban Treaty Organization. Among the several certification tests carried out at each station, the verification of the radionuclide activity concentrations is a crucial one and is based on an independent testing of the airflow rate measurement system and of the gamma detector system, as well as on the assessment of the samples collected during parallel sampling and measured at radionuclide laboratories.

Anatomic tibial component design can increase tibial coverage and rotational alignment accuracy: a comparison of six contemporary designs.

PubMed

Dai, Yifei; Scuderi, Giles R; Bischoff, Jeffrey E; Bertin, Kim; Tarabichi, Samih; Rajgopal, Ashok

2014-12-01

The aim of this study was to comprehensively evaluate contemporary tibial component designs against global tibial anatomy. We hypothesized that anatomically designed tibial components offer increased morphological fit to the resected proximal tibia with increased alignment accuracy compared to symmetric and asymmetric designs. Using a multi-ethnic bone dataset, six contemporary tibial component designs were investigated, including anatomic, asymmetric, and symmetric design types. Investigations included (1) measurement of component conformity to the resected tibia using a comprehensive set of size and shape metrics; (2) assessment of component coverage on the resected tibia while ensuring clinically acceptable levels of rotation and overhang; and (3) evaluation of the incidence and severity of component downsizing due to adherence to rotational alignment and overhang requirements, and the associated compromise in tibial coverage. Differences in coverage were statistically compared across designs and ethnicities, as well as between placements with or without enforcement of proper rotational alignment. Compared to non-anatomic designs investigated, the anatomic design exhibited better conformity to resected tibial morphology in size and shape, higher tibial coverage (92% compared to 85-87%), more cortical support (posteromedial region), lower incidence of downsizing (3% compared to 39-60%), and less compromise of tibial coverage (0.5% compared to 4-6%) when enforcing proper rotational alignment. The anatomic design demonstrated meaningful increase in tibial coverage with accurate rotational alignment compared to symmetric and asymmetric designs, suggesting its potential for less intra-operative compromises and improved performance. III.

The long life of Pioneer interplanetary spacecraft

NASA Technical Reports Server (NTRS)

Dixon, W. J.

1974-01-01

The Pioneer 6 to 9 interplanetary spacecraft were launched in 1965, 66, 67, and 68. All continue to operate in various orbits about the sun, gathering data on the solar system environment. Pioneer 10 was launched in 1972, and is now more than halfway to Jupiter, with all systems performing their required functions. The paper reviews these programs and the few anomalies which have been observed. The long-term mission success is discussed in terms of possible causative factors: simplicity in design and operation, redundancy in function and in equipment, comprehensive development and acceptance tests, the mildness of the space environment, and luck.

Psychiatric components of a Health Maintenance Facility (HMF) on Space Station

NASA Technical Reports Server (NTRS)

Santy, Patricia A.

1987-01-01

The operational psychiatric requirements for a comprehensive Health Maintenance Facility (HMF) on a permanently manned Space Station are examined. Consideration is given to the psychological health maintenance program designed for the diagnosis of mental distress in astronauts during flight and for prevention of mental breakdown. The types of mental disorders that can possibly affect the astronauts in flight are discussed, including various organic, psychotic, and affective mental disorders, as well as anxiety, adjustment, and somatoform/dissociative disorders. Special attention is given to therapeutic considerations for psychiatric operations on Space Station, such as restraints, psychopharmacology, psychotherapy, and psychosocial support.

Comprehensive analysis of a Radiology Operations Management computer system.

PubMed

Arenson, R L; London, J W

1979-11-01

The Radiology Operations Management computer system at the Hospital of the University of Pennsylvania is discussed. The scheduling and file room modules are based on the system at Massachusetts General Hospital. Patient delays are indicated by the patient tracking module. A reporting module allows CRT/keyboard entry by transcriptionists, entry of standard reports by radiologists using bar code labels, and entry by radiologists using a specialty designed diagnostic reporting terminal. Time-flow analyses demonstrate a significant improvement in scheduling, patient waiting, retrieval of radiographs, and report delivery. Recovery of previously lost billing contributes to the proved cost effectiveness of this system.

Operations analysis (study 2.1). Contingency analysis. [of failure modes anticipated during space shuttle upper stage planning

NASA Technical Reports Server (NTRS)

1974-01-01

Future operational concepts for the space transportation system were studied in terms of space shuttle upper stage failure contingencies possible during deployment, retrieval, or space servicing of automated satellite programs. Problems anticipated during mission planning were isolated using a modified 'fault tree' technique, normally used in safety analyses. A comprehensive space servicing hazard analysis is presented which classifies possible failure modes under the catagories of catastrophic collision, failure to rendezvous and dock, servicing failure, and failure to undock. The failure contingencies defined are to be taken into account during design of the upper stage.

[Establishment of a comprehensive database for laryngeal cancer related genes and the miRNAs].

PubMed

Li, Mengjiao; E, Qimin; Liu, Jialin; Huang, Tingting; Liang, Chuanyu

2015-09-01

By collecting and analyzing the laryngeal cancer related genes and the miRNAs, to build a comprehensive laryngeal cancer-related gene database, which differs from the current biological information database with complex and clumsy structure and focuses on the theme of gene and miRNA, and it could make the research and teaching more convenient and efficient. Based on the B/S architecture, using Apache as a Web server, MySQL as coding language of database design and PHP as coding language of web design, a comprehensive database for laryngeal cancer-related genes was established, providing with the gene tables, protein tables, miRNA tables and clinical information tables of the patients with laryngeal cancer. The established database containsed 207 laryngeal cancer related genes, 243 proteins, 26 miRNAs, and their particular information such as mutations, methylations, diversified expressions, and the empirical references of laryngeal cancer relevant molecules. The database could be accessed and operated via the Internet, by which browsing and retrieval of the information were performed. The database were maintained and updated regularly. The database for laryngeal cancer related genes is resource-integrated and user-friendly, providing a genetic information query tool for the study of laryngeal cancer.

Comprehensive Modeling and Analysis of Rotorcraft Variable Speed Propulsion System With Coupled Engine/Transmission/Rotor Dynamics

NASA Technical Reports Server (NTRS)

DeSmidt, Hans A.; Smith, Edward C.; Bill, Robert C.; Wang, Kon-Well

2013-01-01

This project develops comprehensive modeling and simulation tools for analysis of variable rotor speed helicopter propulsion system dynamics. The Comprehensive Variable-Speed Rotorcraft Propulsion Modeling (CVSRPM) tool developed in this research is used to investigate coupled rotor/engine/fuel control/gearbox/shaft/clutch/flight control system dynamic interactions for several variable rotor speed mission scenarios. In this investigation, a prototypical two-speed Dual-Clutch Transmission (DCT) is proposed and designed to achieve 50 percent rotor speed variation. The comprehensive modeling tool developed in this study is utilized to analyze the two-speed shift response of both a conventional single rotor helicopter and a tiltrotor drive system. In the tiltrotor system, both a Parallel Shift Control (PSC) strategy and a Sequential Shift Control (SSC) strategy for constant and variable forward speed mission profiles are analyzed. Under the PSC strategy, selecting clutch shift-rate results in a design tradeoff between transient engine surge margins and clutch frictional power dissipation. In the case of SSC, clutch power dissipation is drastically reduced in exchange for the necessity to disengage one engine at a time which requires a multi-DCT drive system topology. In addition to comprehensive simulations, several sections are dedicated to detailed analysis of driveline subsystem components under variable speed operation. In particular an aeroelastic simulation of a stiff in-plane rotor using nonlinear quasi-steady blade element theory was conducted to investigate variable speed rotor dynamics. It was found that 2/rev and 4/rev flap and lag vibrations were significant during resonance crossings with 4/rev lagwise loads being directly transferred into drive-system torque disturbances. To capture the clutch engagement dynamics, a nonlinear stick-slip clutch torque model is developed. Also, a transient gas-turbine engine model based on first principles mean-line compressor and turbine approximations is developed. Finally an analysis of high frequency gear dynamics including the effect of tooth mesh stiffness variation under variable speed operation is conducted including experimental validation. Through exploring the interactions between the various subsystems, this investigation provides important insights into the continuing development of variable-speed rotorcraft propulsion systems.

System level airworthiness tool: A comprehensive approach to small unmanned aircraft system airworthiness

NASA Astrophysics Data System (ADS)

Burke, David A.

One of the pillars of aviation safety is assuring sound engineering practices through airworthiness certification. As Unmanned Aircraft Systems (UAS) grow in popularity, the need for airworthiness standards and verification methods tailored for UAS becomes critical. While airworthiness practices for large UAS may be similar to manned aircraft, it is clear that small UAS require a paradigm shift from the airworthiness practices of manned aircraft. Although small in comparison to manned aircraft these aircraft are not merely remote controlled toys. Small UAS may be complex aircraft flying in the National Airspace System (NAS) over populated areas for extended durations and beyond line of sight of the operators. A comprehensive systems engineering framework for certifying small UAS at the system level is needed. This work presents a point based tool that evaluates small UAS by rewarding good engineering practices in design, analysis, and testing. The airworthiness requirements scale with vehicle size and operational area, while allowing flexibility for new technologies and unique configurations.

Heat Transfer Measurements with Surface Mounted Foil-Sensors in an Active Mode: A Comprehensive Review and a New Design

PubMed Central

Mocikat, Horst; Herwig, Heinz

2009-01-01

A comprehensive review of film-sensors shows that they are primarily operated in a passive mode, i.e. without being actively heated to an extent, whereby they create a heat transfer situation on their own. Only when these sensors are used for wall shear stress measurements, the detection of laminar/turbulent transition, or the measurement of certain flow velocities, they are operated in an active mode, i.e. heated by an electrical current (after an appropriate calibration). In our study we demonstrate how these R(T)-based sensors (temperature dependence of the electrical resistance R) can also be applied in an active mode for heat transfer measurements. These measurements can be made on cold, unheated bodies, provided certain requirements with respect to the flow field are fulfilled. Our new sensors are laminated nickel- and polyimide-foils manufactured with a special technology, which is also described in detail. PMID:22574060

Optical design of the EPIC-IM crossed Dragone telescope

NASA Astrophysics Data System (ADS)

Tran, Huan; Johnson, Brad; Dragovan, Mark; Bock, James; Aljabri, Abdullah; Amblard, Alex; Bauman, Daniel; Betoule, Marc; Chui, Talso; Colombo, Loris; Cooray, Asantha; Crumb, Dustin; Day, Peter; Dickenson, Clive; Dowell, Darren; Golwala, Sunil; Gorski, Krzysztof; Hanany, Shaul; Holmes, Warren; Irwin, Kent; Keating, Brian; Kuo, Chao-Lin; Lee, Adrian; Lange, Andrew; Lawrence, Charles; Meyer, Steve; Miller, Nate; Nguyen, Hien; Pierpaoli, Elena; Ponthieu, Nicolas; Puget, Jean-Loup; Raab, Jeff; Richards, Paul; Satter, Celeste; Seiffert, Mike; Shimon, Meir; Williams, Brett; Zmuidzinas, Jonas

2010-07-01

The Experimental Probe of Inflationary Cosmology - Intermediate Mission (EPIC-IM) is a concept for the NASA Einstein Inflation Probe satellite. EPIC-IM is designed to characterize the polarization properties of the Cosmic Microwave Background to search for the B-mode polarization signal characteristic of gravitational waves generated during the epoch of Inflation in the early universe. EPIC-IM employs a large focal plane with 11,000 detectors operating in 9 wavelength bands to provide 30 times higher sensitivity than the currently operating Planck satellite. The optical design is based on a wide-field 1.4 m crossed-Dragone telescope, an aperture that allows not only comprehensive measurements of Inflationary B-mode polarization, but also measurements of the E-mode and lensing polarization signals to cosmological limits, as well as all-sky maps of Galactic polarization with unmatched sensitivity and angular resolution. The optics are critical to measuring these extremely faint polarization signals, and any design must meet demanding requirements on systematic error control. We describe the EPIC-IM crossed Dragone optical design, its polarization properties, and far-sidelobe response.

A distributed data acquisition software scheme for the Laboratory Telerobotic Manipulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, P.L.; Glassell, R.L.; Rowe, J.C.

1990-01-01

A custom software architecture was developed for use in the Laboratory Telerobotic Manipulator (LTM) to provide support for the distributed data acquisition electronics. This architecture was designed to provide a comprehensive development environment that proved to be useful for both hardware and software debugging. This paper describes the development environment and the operational characteristics of the real-time data acquisition software. 8 refs., 5 figs.

Material characterization of active fiber composites for integral twist-actuated rotor blade application

NASA Astrophysics Data System (ADS)

Wickramasinghe, Viresh K.; Hagood, Nesbitt W.

2004-10-01

The primary objective of this work was to perform material characterization of the active fiber composite (AFC) actuator system for the Boeing active material rotor (AMR) blade application. The purpose of the AMR was to demonstrate active vibration control in helicopters through integral twist-actuation of the blade. The AFCs were a new structural actuator system consisting of piezoceramic fibers embedded in an epoxy matrix and sandwiched between interdigitated electrodes to enhance actuation performance. These conformable actuators were integrated directly into the blade spar laminate as active plies within the composite structure to perform structural control. Therefore, extensive electromechanical material characterization was required to evaluate AFCs both as actuators and as structural components of the blade. The characterization tests designed to extract important electromechanical properties under simulated blade operating conditions included nominal actuation tests, stress-strain tests and actuation under tensile load tests. This paper presents the test results as well as the comprehensive testing procedure developed to evaluate the relevant properties of the AFCs for structural application. The material characterization tests provided an invaluable insight into the behavior of the AFCs under various electromechanical conditions. The results from this comprehensive material characterization of the AFC actuator system supported the design and operation of the AMR blades scheduled for wind tunnel tests.

[Study on SHI's Bian stone comprehensive therapy for rehabilitation after induced abortion].

PubMed

Ran, Qing-zhen; Shi, An-li

2009-02-01

To explore the rehabilitation effect of SHI's Bian stone comprehensive therapy on the patient after induced abortion. Thirty cases of induced abortion were treated with SHI's Bian stone comprehensive therapy in peri-operative period. Before the operation, scraping therapy was given at the parts of The Urinary Bladder Channel and The Governor Vessel on the back and 30 min after the operation, the patient took a rest in a horizontal position on a mild heat Bian stone blanket and hot compress with a Bian stone plate was given at the lower abdomen. They received thrice return visits respectively on 1, 2, 3 weeks after the operation and SHI's Bian stone comprehensive therapy, including warm massage on The Governor Vessel, scraping the channel, patting Baliao (BL 31, BL 32, BL 33, BL 34), penetration needling Sanyinjiao (SP 6), oblique needling Qihai (CV 6), Guanyuan (CV 4), Zhongji (CV 3), Zigong (EX-CA 1), and the Bian stone plate was placed on the needle hand for warm compress. Colporrhagia, menstrual return, soreness of waist and other symptoms after the operation were observed. After SHI's Bian stone comprehensive therapy, in the patient of induced abortion the colporrhagia volume was less within 3 days after the operation and the colporrhagia stopped more early; of the 30 cases, only 2 has soreness of waist, abdominal pain, fearing cool and other symptoms, and only one case had obviously delayed mestrual cycle. SHI's Bian stone comprehensive therapy used in peri-operative period of induced abortion has a good promoting action on post operative rehabilitation.

Creating a roadmap for delivering gender-sensitive comprehensive care for women Veterans: results of a national expert panel.

PubMed

deKleijn, Miriam; Lagro-Janssen, Antoine L M; Canelo, Ismelda; Yano, Elizabeth M

2015-04-01

Women Veterans are a significant minority of users of the VA healthcare system, limiting provider and staff experience meeting their needs in environments historically designed for men. The VA is nonetheless committed to ensuring that women Veterans have access to comprehensive care in environments sensitive to their needs. We sought to determine what aspects of care need to be tailored to the needs of women Veterans in order for the VA to deliver gender-sensitive comprehensive care. Modified Delphi expert panel process. Eleven clinicians and social scientists with expertise in women's health, primary care, and mental health. Importance of tailoring over 100 discrete aspects of care derived from the Institute of Medicine's definition of comprehensive care and literature-based domains of sex-sensitive care on a 5-point scale. Panelists rated over half of the aspects of care as very-to-extremely important (median score 4+) to tailor to the needs of women Veterans. The panel arrived at 14 priority recommendations that broadly encompassed the importance of (1) the design/delivery of services sensitive to trauma histories, (2) adapting to women's preferences and information needs, and (3) sex awareness and cultural transformation in every facet of VA operations. We used expert panel methods to arrive at consensus on top priority recommendations for improving delivery of sex-sensitive comprehensive care in VA settings. Accomplishment of their breadth will require national, regional, and local strategic action and multilevel stakeholder engagement, and will support VA's national efforts at improving customer service for all Veterans.

[Comprehensive system integration and networking in operating rooms].

PubMed

Feußner, H; Ostler, D; Kohn, N; Vogel, T; Wilhelm, D; Koller, S; Kranzfelder, M

2016-12-01

A comprehensive surveillance and control system integrating all devices and functions is a precondition for realization of the operating room of the future. Multiple proprietary integrated operation room systems are currently available with a central user interface; however, they only cover a relatively small part of all functionalities. Internationally, there are at least three different initiatives to promote a comprehensive systems integration and networking in the operating room: the Japanese smart cyber operating theater (SCOT), the American medical device plug-and-play interoperability program (MDPnP) and the German secure and dynamic networking in operating room and hospital (OR.NET) project supported by the Federal Ministry of Education and Research. Within the framework of the internationally advanced OR.NET project, prototype solution approaches were realized, which make short-term and mid-term comprehensive data retrieval systems probable. An active and even autonomous control of the medical devices by the surveillance and control system (closed loop) is expected only in the long run due to strict regulatory barriers.

Computer aided airship design

NASA Technical Reports Server (NTRS)

Davis, S. J.; Rosenstein, H.

1975-01-01

The Comprehensive Airship Sizing and Performance Computer Program (CASCOMP) is described which was developed and used in the design and evaluation of advanced lighter-than-air (LTA) craft. The program defines design details such as engine size and number, component weight buildups, required power, and the physical dimensions of airships which are designed to meet specified mission requirements. The program is used in a comparative parametric evaluation of six advanced lighter-than-air concepts. The results indicate that fully buoyant conventional airships have the lightest gross lift required when designed for speeds less than 100 knots and the partially buoyant concepts are superior above 100 knots. When compared on the basis of specific productivity, which is a measure of the direct operating cost, the partially buoyant lifting body/tilting prop-rotor concept is optimum.

Stereoscopic medical imaging collaboration system

NASA Astrophysics Data System (ADS)

Okuyama, Fumio; Hirano, Takenori; Nakabayasi, Yuusuke; Minoura, Hirohito; Tsuruoka, Shinji

2007-02-01

The computerization of the clinical record and the realization of the multimedia have brought improvement of the medical service in medical facilities. It is very important for the patients to obtain comprehensible informed consent. Therefore, the doctor should plainly explain the purpose and the content of the diagnoses and treatments for the patient. We propose and design a Telemedicine Imaging Collaboration System which presents a three dimensional medical image as X-ray CT, MRI with stereoscopic image by using virtual common information space and operating the image from a remote location. This system is composed of two personal computers, two 15 inches stereoscopic parallax barrier type LCD display (LL-151D, Sharp), one 1Gbps router and 1000base LAN cables. The software is composed of a DICOM format data transfer program, an operation program of the images, the communication program between two personal computers and a real time rendering program. Two identical images of 512×768 pixcels are displayed on two stereoscopic LCD display, and both images show an expansion, reduction by mouse operation. This system can offer a comprehensible three-dimensional image of the diseased part. Therefore, the doctor and the patient can easily understand it, depending on their needs.

Design, analysis, operation, and advanced control of hybrid renewable energy systems

NASA Astrophysics Data System (ADS)

Whiteman, Zachary S.

Because using non-renewable energy systems (e.g., coal-powered co-generation power plants) to generate electricity is an unsustainable, environmentally hazardous practice, it is important to develop cost-effective and reliable renewable energy systems, such as photovoltaics (PVs), wind turbines (WTs), and fuel cells (FCs). Non-renewable energy systems, however, are currently less expensive than individual renewable energy systems (IRESs). Furthermore, IRESs based on intermittent natural resources (e.g., solar irradiance and wind) are incapable of meeting continuous energy demands. Such shortcomings can be mitigated by judiciously combining two or more complementary IRESs to form a hybrid renewable energy system (HRES). Although previous research efforts focused on the design, operation, and control of HRESs has proven useful, no prior HRES research endeavor has taken a systematic and comprehensive approach towards establishing guidelines by which HRESs should be designed, operated, and controlled. The overall goal of this dissertation, therefore, is to establish the principles governing the design, operation, and control of HRESs resulting in cost-effective and reliable energy solutions for stationary and mobile applications. To achieve this goal, we developed and demonstrated four separate HRES principles. Rational selection of HRES type: HRES components and their sizes should be rationally selected using knowledge of component costs, availability of renewable energy resources, and expected power demands of the application. HRES design: by default, the components of a HRES should be arranged in parallel for increased efficiency and reliability. However, a series HRES design may be preferred depending on the operational considerations of the HRES components. HRES control strategy selection: the choice of HRES control strategy depends on the dynamics of HRES components, their operational considerations, and the practical limitations of the HRES end-use. HRES data-driven control: information-rich data should be used to assist in the intelligent coordination of HRES components in meeting its operating objectives when additional computation can be afforded and significant benefits can be realized.

Industrial Application Study on New-Type Mixed-Flow Fluidized Bed Bottom Ash Cooler

NASA Astrophysics Data System (ADS)

Zeng, B.; Lu, X. F.; Liu, H. Z.

As a key auxiliary device of CFB boiler, the bottom ash cooler (BAC) has a direct influence on secure and economic operation of the boiler. The operating situation of domestic CFB power plant is complex and changeable with a bad coal-fired condition. The principle for designing BAC suitable for the bad coal-fired condition and high parameter CFB boilers was summarized in this paper. Meanwhile, a new-type mixed-flow fluidized bed bottom ash cooler was successfully designed on the basis of the comprehensive investigation on the existing BAC s merits and drawbacks. Using coarse/fine slag separation technology and micro-bubbling fluidization are the significant characteristics of this new BAC. This paper also puts great emphasis on its industrial test in a 460t/h CFB boiler. The results indicate that it achieves significant separation of the coarse/fine slag, an obvious cooling effect, no slag block and coking phenomenon, and continuous stable operation. Figs 7, Tabs 4 and Refs 11.

Problems and prospects connected with development of high-temperature filtration technology at nuclear power plants equipped with VVER-1000 reactors

NASA Astrophysics Data System (ADS)

Shchelik, S. V.; Pavlov, A. S.

2013-07-01

Results of work on restoring the service properties of filtering material used in the high-temperature reactor coolant purification system of a VVER-1000 reactor are presented. A quantitative assessment is given to the effect from subjecting a high-temperature sorbent to backwashing operations carried out with the use of regular capacities available in the design process circuit in the first years of operation of Unit 3 at the Kalinin nuclear power plant. Approaches to optimizing this process are suggested. A conceptual idea about comprehensively solving the problem of achieving more efficient and safe operation of the high-temperature active water treatment system (AWT-1) on a nuclear power industry-wide scale is outlined.

The Design and Development of the Phillips-Patterson Test of Inference Ability in Reading Comprehension.

ERIC Educational Resources Information Center

Phillips, Linda M.

The design and development of a test of inference ability in reading comprehension for grades 6, 7, and 8 (the Phillips-Patterson Test of Inference Ability in Reading Comprehension) are described. After development of a contemporary theoretical framework for the test of inference ability in reading comprehension, the design, item development, and…

Safety Assurance in NextGen

NASA Technical Reports Server (NTRS)

HarrisonFleming, Cody; Spencer, Melissa; Leveson, Nancy; Wilkinson, Chris

2012-01-01

The generation of minimum operational, safety, performance, and interoperability requirements is an important aspect of safely integrating new NextGen components into the Communication Navigation Surveillance and Air Traffic Management (CNS/ATM) system. These requirements are used as part of the implementation and approval processes. In addition, they provide guidance to determine the levels of design assurance and performance that are needed for each element of the new NextGen procedures, including aircraft, operator, and Air Navigation and Service Provider. Using the enhanced Airborne Traffic Situational Awareness for InTrail Procedure (ATSA-ITP) as an example, this report describes some limitations of the current process used for generating safety requirements and levels of required design assurance. An alternative process is described, as well as the argument for why the alternative can generate more comprehensive requirements and greater safety assurance than the current approach.

Connected Vehicle Pilot Deployment Program Phase 2 : Comprehensive Maintenance and Operations Plan - New York City

DOT National Transportation Integrated Search

2018-05-31

This Comprehensive Maintenance and Operations Plan (CMOP) describes the types and number of equipment to be operated and maintained for the proposed New York City (NYC) Connected Vehicle Pilot Deployment (CVPD) system. Its objective is to develop a p...

Fixed Route Comprehensive Operational Analysis, 1994 Operating Year. Fourth Installment Route 3: Mill Ridge/Mill Plain Analysis

DOT National Transportation Integrated Search

1995-05-01

In October, of 1992, the Housatonic Area Regional Transit (HART) District published a planning study providing an in-depth analysis of its fixed route bus transit service. This comprehensive operational analysis (COA) was the first detailed analysis ...

Fixed Route Comprehensive Operational Analysis, 1994 Operating Year. First Installment, Route 1: Medical Center/Golden Hill Analysis

DOT National Transportation Integrated Search

1994-07-01

In October, of 1992, the Housatonic Area Regional Transit (HART) District published a planning study providing an in-depth analysis of its fixed route bus transit service. This comprehensive operational analysis (COA) was the first detailed analysis ...

Fixed Route Comprehensive Operational Analysis, 1994 Operating Year. Third Installment, Route 6: Lake Avenue/Danbury Fair Mall Analysis

DOT National Transportation Integrated Search

1995-02-01

In October, of 1992, the Housatonic Area Regional Transit (HART) District published a planning study providing an in-depth analysis of its fixed route bus transit service. This comprehensive operational analysis (COA) was the first detailed analysis ...

Probing Factors Influencing Students' Graph Comprehension Regarding Four Operations in Kinematics Graphs

ERIC Educational Resources Information Center

Phage, Itumeleng B.; Lemmer, Miriam; Hitge, Mariette

2017-01-01

Students' graph comprehension may be affected by the background of the students who are the readers or interpreters of the graph, their knowledge of the context in which the graph is set, and the inferential processes required by the graph operation. This research study investigated these aspects of graph comprehension for 152 first year…

Design and Experimental Study on Spinning Solid Rocket Motor

NASA Astrophysics Data System (ADS)

Xue, Heng; Jiang, Chunlan; Wang, Zaicheng

The study on spinning solid rocket motor (SRM) which used as power plant of twice throwing structure of aerial submunition was introduced. This kind of SRM which with the structure of tangential multi-nozzle consists of a combustion chamber, propellant charge, 4 tangential nozzles, ignition device, etc. Grain design, structure design and prediction of interior ballistic performance were described, and problem which need mainly considered in design were analyzed comprehensively. Finally, in order to research working performance of the SRM, measure pressure-time curve and its speed, static test and dynamic test were conducted respectively. And then calculated values and experimental data were compared and analyzed. The results indicate that the designed motor operates normally, and the stable performance of interior ballistic meet demands. And experimental results have the guidance meaning for the pre-research design of SRM.

OMV man/system simulation integration: A preliminary analysis and recommendation

NASA Technical Reports Server (NTRS)

Rogers, Jon G.

1988-01-01

The Orbital Maneuvering Vehicle (OMV) presents a series of challenges to the human operator. Some are unique to the OMV system itself, and are largely due to remote control versus control from the cockpit. Other challenges are not necessarily unique to the OMV, but are characteristic of many man-machine space flight systems. All of these challenges affect the operator's ability to perform his portion of the mission, and could lead to human error which might jeopardize the vehicle, mission, or both. It is imperative to make every effort to design the control and displays to facilitate the operator's task. The experimental program should address the perceptual, mediational, and motor dimensions of operator performance. With this in mind, a literature review with relevant design considerations was initiated, and a comprehensive outline of control/display parameters were developed. Out of this, a series of questions not answered in the literature was derived which can be converted into experimental protocols for the simulation program. A major task of the aircraft pilot as well as the OMV operator is prediction. Certain display principles have proved to enhance the pilot's ability to predict. A brief examination of some of these principles in relationship to OMV may be useful.

Software for marine ecological environment comprehensive monitoring system based on MCGS

NASA Astrophysics Data System (ADS)

Wang, X. H.; Ma, R.; Cao, X.; Cao, L.; Chu, D. Z.; Zhang, L.; Zhang, T. P.

2017-08-01

The automatic integrated monitoring software for marine ecological environment based on MCGS configuration software is designed and developed to realize real-time automatic monitoring of many marine ecological parameters. The DTU data transmission terminal performs network communication and transmits the data to the user data center in a timely manner. The software adopts the modular design and has the advantages of stable and flexible data structure, strong portability and scalability, clear interface, simple user operation and convenient maintenance. Continuous site comparison test of 6 months showed that, the relative error of the parameters monitored by the system such as temperature, salinity, turbidity, pH, dissolved oxygen was controlled within 5% with the standard method and the relative error of the nutrient parameters was within 15%. Meanwhile, the system had few maintenance times, low failure rate, stable and efficient continuous monitoring capabilities. The field application shows that the software is stable and the data communication is reliable, and it has a good application prospect in the field of marine ecological environment comprehensive monitoring.

Air & Space Power Journal. Volume 28, Number 3, May-June 2014

DTIC Science & Technology

2014-06-01

critical role that AETC organizations—such as the Air Force Security Assistance Training Squadron; HQ AETC/A3Q; the AAA; and, potentially , the IAAFA... Potential de- fects in the design are more likely than computer hacking and are most effectively abated through comprehensive testing demanded by the best...fascinating picture of the potential employment methodologies and skill sets demanded of crews that operate assets like FQ-X. From a cyber-defense

[Process design in high-reliability organizations].

PubMed

Sommer, K-J; Kranz, J; Steffens, J

2014-05-01

Modern medicine is a highly complex service industry in which individual care providers are linked in a complicated network. The complexity and interlinkedness is associated with risks concerning patient safety. Other highly complex industries like commercial aviation have succeeded in maintaining or even increasing its safety levels despite rapidly increasing passenger figures. Standard operating procedures (SOPs), crew resource management (CRM), as well as operational risk evaluation (ORE) are historically developed and trusted parts of a comprehensive and systemic safety program. If medicine wants to follow this quantum leap towards increased patient safety, it must intensively evaluate the results of other high-reliability industries and seek step-by-step implementation after a critical assessment.

Application of an onboard processor to the OAO C spacecraft

NASA Technical Reports Server (NTRS)

Stewart, W. N.; Hartenstein, R. G.; Trevathan, C.

1972-01-01

The design of a stored program computer for spacecraft use and its application on the fourth Orbiting Astronomical Observatory (OAO) is reported. The computer is a medium scale, parallel machine with a memory capacity of 16384 words of 18 bits each. It possesses a comprehensive instruction repertoire and operates on 45 W of power (including the dc-to-dc converter). The machine operates at a 500-kHz rate and executes an add instruction in 10 microseconds. Its primary functions on OAO C will be auxiliary command storage, spacecraft monitoring and malfunction reporting, data compression and status summary, and possible performance of emergency corrective action for certain anomalous situations.

Guidelines for riser splash zone design and repair

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-02-01

The many years of offshore oil and gas development has established the subsea pipeline as a reliable and cost effective means of transportation for produced hydrocarbons. The requirement for subsea pipeline systems will continue to move into deeper water and more remote locations with the future development of oil and gas exploration. The integrity of subsea pipeline and riser systems, throughout their operating lifetime, is an important area for operators to consider in maximizing reliability and serviceability for economic, contractual and environmental reasons. Adequate design and installation are the basis for ensuring the integrity of any subsea pipeline and risermore » systems. In the event of system damage, from any source, quick and accurate repair and reinstatement of the pipeline system is essential. This report has been developed to provide guidelines for riser and splash zone design, to perform a detailed overview of existing riser repair techniques and products, and to prepare comprehensive guidelines identifying the capabilities and limits of riser reinstatement systems.« less

Cryogenic applications of commercial electronic components

NASA Astrophysics Data System (ADS)

Buchanan, Ernest D.; Benford, Dominic J.; Forgione, Joshua B.; Harvey Moseley, S.; Wollack, Edward J.

2012-10-01

We have developed a range of techniques useful for constructing analog and digital circuits for operation in a liquid Helium environment (4.2 K), using commercially available low power components. The challenges encountered in designing cryogenic electronics include finding components that can function usefully in the cold and possess low enough power dissipation so as not to heat the systems they are designed to measure. From design, test, and integration perspectives it is useful for components to operate similarly at room and cryogenic temperatures; however this is not a necessity. Some of the circuits presented here have been used successfully in the MUSTANG [1] and in the GISMO [2] camera to build a complete digital to analog multiplexer (which will be referred to as the Cryogenic Address Driver board). Many of the circuit elements described are of a more general nature rather than specific to the Cryogenic Address Driver board, and were studied as a part of a more comprehensive approach to addressing a larger set of cryogenic electronic needs.

Cryogenic Applications of Commercial Electronic Components

NASA Technical Reports Server (NTRS)

Buchanan, Ernest D.; Benford, Dominic J.; Forgione, Joshua B.; Moseley, S. Harvey; Wollack, Edward J.

2012-01-01

We have developed a range of techniques useful for constructing analog and digital circuits for operation in a liquid Helium environment (4.2K), using commercially available low power components. The challenges encountered in designing cryogenic electronics include finding components that can function usefully in the cold and possess low enough power dissipation so as not to heat the systems they are designed to measure. From design, test, and integration perspectives it is useful for components to operate similarly at room and cryogenic temperatures; however this is not a necessity. Some of the circuits presented here have been used successfully in the MUSTANG and in the GISMO camera to build a complete digital to analog multiplexer (which will be referred to as the Cryogenic Address Driver board). Many of the circuit elements described are of a more general nature rather than specific to the Cryogenic Address Driver board, and were studied as a part of a more comprehensive approach to addressing a larger set of cryogenic electronic needs.

SCE&G Cope Station simulator training program development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stottlemire, J.L.; Fabry, R.

1996-11-01

South Carolina Electric and Gas Company made a significant investment into meeting the needs of their customers in designing and building the new fossil Generating Station near Cope, South Carolina. Cope Station is a state-of-the-art, 385 MW plant, with equipment and design features that will provide the plant with the capabilities of achieving optimum availability and capability. SCE&G has also implemented a team concept approach to plant organization at Cope Station. The modern plant design, operating philosophy, and introduction of a large percentage of new operations personnel presented a tremendous challenge in preparing for plant commissioning and commercial operation. SCE&G`smore » answer to this challenge was to hire an experienced operations trainer, and implement a comprehensive training program. An important part of the training investment was the procurement of a plant specific control room simulator. SCE&G, through tailored collaboration with the Electric Power Research Institute (EPRI), developed a specification for a simulator with the features necessary for training the initial plant staff as well as advanced operator training. The high-fidelity CRT based training simulator is a stimulated system that completely and accurately simulates the various plant systems, process startups, shutdowns, normal operating scenarios, and malfunctions. The process model stimulates a Foxboro Distributed Control System consisting of twelve control processors, five WP51 work stations, and one AW51 file server. The workstations, file server and support hardware and software necessary to interface with ESSCOR`s FSIM4 software was provided by Foxoboro.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, J.; Xue, X.

A comprehensive 3D CFD model is developed for a bi-electrode supported cell (BSC) SOFC. The model includes complicated transport phenomena of mass/heat transfer, charge (electron and ion) migration, and electrochemical reaction. The uniqueness of the modeling study is that functionally graded porous electrode property is taken into account, including not only linear but nonlinear porosity distributions. Extensive numerical analysis is performed to elucidate the effects of both porous microstructure distributions and operating condition on cell performance. Results indicate that cell performance is strongly dependent on both operating conditions and porous microstructure distributions of electrodes. Using the proposed fuel/gas feeding design,more » the uniform hydrogen distribution within porous anode is achieved; the oxygen distribution within the cathode is dependent on porous microstructure distributions as well as pressure loss conditions. Simulation results show that fairly uniform temperature distribution can be obtained with the proposed fuel/gas feeding design. The modeling results can be employed to guide experimental design of BSC test and provide pre-experimental analysis, as a result, to circumvent high cost associated with try-and-error experimental design and setup.« less

Comprehensive Performance Nutrition for Special Operations Forces.

PubMed

Daigle, Karen A; Logan, Christi M; Kotwal, Russ S

2015-01-01

Special Operations Forces (SOF) training, combat, and contingency operations are unique and demanding. Performance nutrition within the Department of Defense has emphasized that nutrition is relative to factors related to the desired outcome, which includes successful performance of mentally and physically demanding operations and missions of tactical and strategic importance, as well as nonoperational assignments. Discussed are operational, nonoperational, and patient categories that require different nutrition strategies to facilitate category-specific performance outcomes. Also presented are 10 major guidelines for a SOF comprehensive performance nutrition program, practical nutrition recommendations for Special Operators and medical providers, as well as resources for dietary supplement evaluation. Foundational health concepts, medical treatment, and task-specific performance factors should be considered when developing and systematically implementing a comprehensive SOF performance nutrition program. When tailored to organizational requirements, SOF unit- and culture-specific nutrition education and services can optimize individual Special Operator performance, overall unit readiness, and ultimately, mission success. 2015.

The Use of Behavior Models for Predicting Complex Operations

NASA Technical Reports Server (NTRS)

Gore, Brian F.

2010-01-01

Modeling and simulation (M&S) plays an important role when complex human-system notions are being proposed, developed and tested within the system design process. National Aeronautics and Space Administration (NASA) as an agency uses many different types of M&S approaches for predicting human-system interactions, especially when it is early in the development phase of a conceptual design. NASA Ames Research Center possesses a number of M&S capabilities ranging from airflow, flight path models, aircraft models, scheduling models, human performance models (HPMs), and bioinformatics models among a host of other kinds of M&S capabilities that are used for predicting whether the proposed designs will benefit the specific mission criteria. The Man-Machine Integration Design and Analysis System (MIDAS) is a NASA ARC HPM software tool that integrates many models of human behavior with environment models, equipment models, and procedural / task models. The challenge to model comprehensibility is heightened as the number of models that are integrated and the requisite fidelity of the procedural sets are increased. Model transparency is needed for some of the more complex HPMs to maintain comprehensibility of the integrated model performance. This will be exemplified in a recent MIDAS v5 application model and plans for future model refinements will be presented.

Analysis of a rotating spool expander for Organic Rankine Cycle applications

NASA Astrophysics Data System (ADS)

Krishna, Abhinav

Increasing interest in recovering or utilizing low-grade heat for power generation has prompted a search for ways in which the power conversion process may be enhanced. Amongst the conversion systems, the Organic Rankine Cycle (ORC) has generated an enormous amount of interest amongst researchers and system designers. Nevertheless, component level technologies need to be developed and match the range of potential applications. In particular, technical challenges associated with scaling expansion machines (turbines) from utility scale to commercial scale have prevented widespread adoption of the technology. In this regard, this work focuses on a novel rotating spool expansion machine at the heart of an Organic Rankine Cycle. A comprehensive, deterministic simulation model of the rotating spool expander is developed. The comprehensive model includes a detailed geometry model of the spool expander and the suction valve mechanism. Sub-models for mass flow, leakage, heat transfer and friction within the expander are also developed. Apart from providing the ability to characterize the expander in a particular system, the model provides a valuable tool to study the impact of various design variables on the performance of the machine. The investigative approach also involved an experimental program to assess the performance of a working prototype. In general, the experimental data showed that the expander performance was sub-par, largely due to the mismatch of prevailing operating conditions and the expander design criteria. Operating challenges during the shakedown tests and subsequent sub-optimal design changes also detracted from performance. Nevertheless, the results of the experimental program were sufficient for a proof-of-concept assessment of the expander and for model validation over a wide range of operating conditions. The results of the validated model reveal several interesting details concerning the expander design and performance. For example, the match between the design expansion ratio and the system imposed pressure ratio has a large influence on the performance of the expander. Further exploration shows that from an operating perspective, under-expansion is preferable to over-expansion. The model is also able to provide insight on the dominant leakage paths in the expander and points to the fact that this is the primary loss mechanism in the current expander. Similar insights are obtained from assessing the sensitivity of various other design variables on expander performance. Based on the understanding provided by the sensitivity analysis, exercising the validated model showed that expander efficiencies on the order of 75% are imminently possible in an improved design. Therefore, with sufficient future development, adoption of the spool expander in ORC systems that span a 50 kW -- 200 kW range is broadly feasible.

Laser velocimeter data acquisition system for the Langley 14- by 22-foot subsonic tunnel. Software reference guide version 3.3

NASA Technical Reports Server (NTRS)

Jumper, Judith K.

1994-01-01

The Laser Velocimeter Data Acquisition System (LVDAS) in the Langley 14- by 22-Foot Tunnel is controlled by a comprehensive software package. The software package was designed to control the data acquisition process during wind tunnel tests which employ a laser velocimeter measurement system. This report provides detailed explanations on how to configure and operate the LVDAS system to acquire laser velocimeter and static wind tunnel data.

Integrating O/S models during conceptual design, part 1

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1994-01-01

The University of Dayton is pleased to submit this report to the National Aeronautics and Space Administration (NASA), Langley Research Center, which integrates a set of models for determining operational capabilities and support requirements during the conceptual design of proposed space systems. This research provides for the integration of the reliability and maintainability (R&M) model, both new and existing simulation models, and existing operations and support (O&S) costing equations in arriving at a complete analysis methodology. Details concerning the R&M model and the O&S costing model may be found in previous reports accomplished under this grant (NASA Research Grant NAG1-1327). In the process of developing this comprehensive analysis approach, significant enhancements were made to the R&M model, updates to the O&S costing model were accomplished, and a new simulation model developed. This is the 1st part of a 3 part technical report.

Use of Probabilistic Risk Assessment in Shuttle Decision Making Process

NASA Technical Reports Server (NTRS)

Boyer, Roger L.; Hamlin, Teri, L.

2011-01-01

This slide presentation reviews the use of Probabilistic Risk Assessment (PRA) to assist in the decision making for the shuttle design and operation. Probabilistic Risk Assessment (PRA) is a comprehensive, structured, and disciplined approach to identifying and analyzing risk in complex systems and/or processes that seeks answers to three basic questions: (i.e., what can go wrong? what is the likelihood of these occurring? and what are the consequences that could result if these occur?) The purpose of the Shuttle PRA (SPRA) is to provide a useful risk management tool for the Space Shuttle Program (SSP) to identify strengths and possible weaknesses in the Shuttle design and operation. SPRA was initially developed to support upgrade decisions, but has evolved into a tool that supports Flight Readiness Reviews (FRR) and near real-time flight decisions. Examples of the use of PRA for the shuttle are reviewed.

Lessons Learned and Technical Standards: A Logical Marriage for Future Space Systems Design

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

A comprehensive database of engineering lessons learned that corresponds with relevant technical standards will be a valuable asset to those engaged in studies on future space vehicle developments, especially for structures, materials, propulsion, control, operations and associated elements. In addition, this will enable the capturing of technology developments applicable to the design, development, and operation of future space vehicles as planned in the Space Launch Initiative. Using the time-honored tradition of passing on lessons learned while utilizing the newest information technology, NASA has launched an intensive effort to link lessons learned acquired through various Internet databases with applicable technical standards. This paper will discuss the importance of lessons learned, the difficulty in finding relevant lessons learned while engaged in a space vehicle development, and the new NASA effort to relate them to technical standards that can help alleviate this difficulty.

An Elementary Overview of the Selection of Materials for Service in Oxygen-Enriched Environments

NASA Technical Reports Server (NTRS)

Davis, Samuel Eddie

2012-01-01

The process for selecting materials for use in oxygen or oxygen-enriched environments is one that continues to be investigated by many industries due to the importance to those industries of oxygen systems. There are several excellent resources available to assist oxygen systems design engineers and end-users, with the most comprehensive being ASTM MNL-36, Safe Use of Oxygen and Oxygen Systems: Handbook for Design, Operation and Maintenance, 2nd Edition. ASTM also makes available several standards for oxygen systems. However, the ASTM publications are extremely detailed, and typically designed for professionals who already possess a working knowledge of oxygen systems. No notable resource exists, whether an ASTM or other organizational publication, which can be used to educate engineers or technicians who have no prior knowledge of the nuances of oxygen system design and safety. This paper will fill the void for information needed by organizations that design or operate oxygen systems. The information in this paper is not new information, but is a concise and easily understood summary of selecting materials for oxygen systems. This paper will serve well as an employee s first introduction to oxygen system materials selection, and probably the employee s first introduction to ASTM.

36 CFR 910.11 - Comprehensive urban planning and design.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Comprehensive urban planning... CORPORATION GENERAL GUIDELINES AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE DEVELOPMENT AREA Urban Planning and Design Concerns § 910.11 Comprehensive urban planning...

Design of pulsed guiding magnetic field for high power microwave generators.

PubMed

Ju, J-C; Zhang, H; Zhang, J; Shu, T; Zhong, H-H

2014-09-01

In this paper, we present a comprehensive study on designing solenoid together with the corresponding power supply system to excite pulsed magnetic field required for high power microwave generators. Particularly, a solenoid is designed and the excited magnetic field is applied to a Ku-band overmoded Cerenkov generator. It is found in experiment that the electron beam is properly guided by the magnetic field and a 1.1 GW high power microwave is achieved at a central frequency of 13.76 GHz. Pulsed solenoid system has the advantages of compactness and low energy consumption, which are of great interest for repetitive operation. The reported studies and results can be generalized to other applications which require magnetic fields.

Intelligent redundant actuation system requirements and preliminary system design

NASA Technical Reports Server (NTRS)

Defeo, P.; Geiger, L. J.; Harris, J.

1985-01-01

Several redundant actuation system configurations were designed and demonstrated to satisfy the stringent operational requirements of advanced flight control systems. However, this has been accomplished largely through brute force hardware redundancy, resulting in significantly increased computational requirements on the flight control computers which perform the failure analysis and reconfiguration management. Modern technology now provides powerful, low-cost microprocessors which are effective in performing failure isolation and configuration management at the local actuator level. One such concept, called an Intelligent Redundant Actuation System (IRAS), significantly reduces the flight control computer requirements and performs the local tasks more comprehensively than previously feasible. The requirements and preliminary design of an experimental laboratory system capable of demonstrating the concept and sufficiently flexible to explore a variety of configurations are discussed.

HFIR Fuel Casting Support

DOE Office of Scientific and Technical Information (OSTI.GOV)

Imhoff, Seth D.; Gibbs, Paul Jacob; Solis, Eunice Martinez

Process exploration for fuel production for the High Flux Isotope Reactor (HFIR) using cast LEU-10wt.%Mo as an initial processing step has just begun. This project represents the first trials concerned with casting design and quality. The studies carried out over the course of this year and information contained in this report address the initial mold development to be used as a starting point for future operations. In broad terms, the final billet design is that of a solid rolling blank with an irregular octagonal cross section. The work covered here is a comprehensive view of the initial attempts to producemore » a sound casting. This report covers the efforts to simulate, predict, cast, inspect, and revise the initial mold design.« less

Aeromechanical stability analysis of COPTER

NASA Technical Reports Server (NTRS)

Yin, Sheng K.; Yen, Jing G.

1988-01-01

A plan was formed for developing a comprehensive, second-generation system with analytical capabilities for predicting performance, loads and vibration, handling qualities, aeromechanical stability, and acoustics. This second-generation system named COPTER (COmprehensive Program for Theoretical Evaluation of Rotorcraft) is designed for operational efficiency, user friendliness, coding readability, maintainability, transportability, modularity, and expandability for future growth. The system is divided into an executive, a data deck validator, and a technology complex. At present a simple executive, the data deck validator, and the aeromechanical stability module of the technology complex were implemented. The system is described briefly, the implementation of the technology module is discussed, and correlation data presented. The correlation includes hingeless-rotor isolated stability, hingeless-rotor ground-resonance stability, and air-resonance stability of an advanced bearingless-rotor in forward flight.

Content and face validity of a comprehensive robotic skills training program for general surgery, urology, and gynecology.

PubMed

Dulan, Genevieve; Rege, Robert V; Hogg, Deborah C; Gilberg-Fisher, Kristine K; Tesfay, Seifu T; Scott, Daniel J

2012-04-01

The authors previously developed a comprehensive, proficiency-based robotic training curriculum that aimed to address 23 unique skills identified via task deconstruction of robotic operations. The purpose of this study was to determine the content and face validity of this curriculum. Expert robotic surgeons (n = 12) rated each deconstructed skill regarding relevance to robotic operations, were oriented to the curricular components, performed 3 to 5 repetitions on the 9 exercises, and rated each exercise. In terms of content validity, experts rated all 23 deconstructed skills as highly relevant (4.5 on a 5-point scale). Ratings for the 9 inanimate exercises indicated moderate to thorough measurement of designated skills. For face validity, experts indicated that each exercise effectively measured relevant skills (100% agreement) and was highly effective for training and assessment (4.5 on a 5-point scale). These data indicate that the 23 deconstructed skills accurately represent the appropriate content for robotic skills training and strongly support content and face validity for this curriculum. Copyright © 2012. Published by Elsevier Inc.

Comprehension of Connected Discourse.

ERIC Educational Resources Information Center

Mosberg, Ludwig; Shima, Fred

A rationale was developed for researching reading comprehension based on information gain. Previous definitions of comprehension which were reviewed included operational vs. nonoperational and skills vs. processes. Comprehension was viewed as an informational processing event which includes a constellation of cognitive and learning processes. Two…

Intelligent Modeling for Nuclear Power Plant Accident Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darling, Michael Christropher; Luger, George F.; Jones, Thomas B.

This study explores the viability of using counterfactual reasoning for impact analyses when understanding and responding to “beyond-design-basis” nuclear power plant accidents. Currently, when a severe nuclear power plant accident occurs, plant operators rely on Severe Accident Management Guidelines. However, the current guidelines are limited in scope and depth: for certain types of accidents, plant operators would have to work to mitigate the damage with limited experience and guidance for the particular situation. We aim to fill the need for comprehensive accident support by using a dynamic Bayesian network to aid in the diagnosis of a nuclear reactor’s state andmore » to analyze the impact of possible response measures.« less

Intelligent Modeling for Nuclear Power Plant Accident Management

DOE PAGES

Darling, Michael Christropher; Luger, George F.; Jones, Thomas B.; ...

2018-03-29

This study explores the viability of using counterfactual reasoning for impact analyses when understanding and responding to “beyond-design-basis” nuclear power plant accidents. Currently, when a severe nuclear power plant accident occurs, plant operators rely on Severe Accident Management Guidelines. However, the current guidelines are limited in scope and depth: for certain types of accidents, plant operators would have to work to mitigate the damage with limited experience and guidance for the particular situation. We aim to fill the need for comprehensive accident support by using a dynamic Bayesian network to aid in the diagnosis of a nuclear reactor’s state andmore » to analyze the impact of possible response measures.« less

Space station structures and dynamics test program

NASA Technical Reports Server (NTRS)

Moore, Carleton J.; Townsend, John S.; Ivey, Edward W.

1987-01-01

The design, construction, and operation of a low-Earth orbit space station poses unique challenges for development and implementation of new technology. The technology arises from the special requirement that the station be built and constructed to function in a weightless environment, where static loads are minimal and secondary to system dynamics and control problems. One specific challenge confronting NASA is the development of a dynamics test program for: (1) defining space station design requirements, and (2) identifying the characterizing phenomena affecting the station's design and development. A general definition of the space station dynamic test program, as proposed by MSFC, forms the subject of this report. The test proposal is a comprehensive structural dynamics program to be launched in support of the space station. The test program will help to define the key issues and/or problems inherent to large space structure analysis, design, and testing. Development of a parametric data base and verification of the math models and analytical analysis tools necessary for engineering support of the station's design, construction, and operation provide the impetus for the dynamics test program. The philosophy is to integrate dynamics into the design phase through extensive ground testing and analytical ground simulations of generic systems, prototype elements, and subassemblies. On-orbit testing of the station will also be used to define its capability.

An Energy Saver Called NECAP

NASA Technical Reports Server (NTRS)

1979-01-01

One of the most comprehensive and most effective programs is NECAP, an acronym for NASA Energy Cost Analysis Program. Developed by Langley Research Center, NECAP operates according to heating/cooling calculation procedures formulated by the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE). The program enables examination of a multitude of influences on heat flow into and out of buildings. For example, NECAP considers traditional weather patterns for a given locale and predicts the effects on a particular building design of sun, rain, wind, even shadows from other buildings. It takes into account the mass of structural materials, insulating values, the type of equipment the building will house, equipment operating schedules, heat by people and machinery, heat loss or gain through windows and other openings and a variety of additional details. NECAP ascertains how much energy the building should require ideally, aids selection of the most economical and most efficient energy systems and suggests design and operational measures for reducing the building's energy needs. Most importantly, NECAP determines cost effectiveness- whether an energy-saving measure will pay back its installation cost through monetary savings in energy bills. thrown off

Operation and Maintenance of Clarks Hill Lake, Savannah River, Georgia, and South Carolina.

DTIC Science & Technology

1981-10-01

gramineus Vesper Sparrow C/W X *Aimophila aestivalis Bachman’s Sparrow U/P X Junco hyemalis Slate-colored Junco C/W X X Spizella passerina Chipping...Results are analyzed to determine levels of prey and predatory fishes to aid in determining stocking rates of additional predators such as hybrid bass. e...be to have a management system controlled to some degree by the Corps of Engineers. The design could be a comprehensive wildlife management program

Use of synthesized data to support complex ad-hoc queries in an enterprise information warehouse: a diabetes use case.

PubMed

Rogers, Patrick; Erdal, Selnur; Santangelo, Jennifer; Liu, Jianhua; Schuster, Dara; Kamal, Jyoti

2008-11-06

The Ohio State University Medical Center (OSUMC) Information Warehouse (IW) is a comprehensive data warehousing facility incorporating operational, clinical, and biological data sets from multiple enterprise system. It is common for users of the IW to request complex ad-hoc queries that often require significant intervention by data analyst. In response to this challenge, we have designed a workflow that leverages synthesized data elements to support such queries in an more timely, efficient manner.

Automated electric power management and control for Space Station Freedom

NASA Technical Reports Server (NTRS)

Dolce, James L.; Mellor, Pamela A.; Kish, James A.

1990-01-01

A comprehensive automation design is being developed for Space Station Freedom's electric power system. It strives to increase station productivity by applying expert systems and conventional algorithms to automate power system operation. An integrated approach to the power system command and control problem is defined and used to direct technology development in: diagnosis, security monitoring and analysis, battery management, and cooperative problem-solving for resource allocation. The prototype automated power system is developed using simulations and test-beds.

Design of a Low Power, Fast-Spectrum, Liquid-Metal Cooled Surface Reactor System

NASA Astrophysics Data System (ADS)

Marcille, T. F.; Dixon, D. D.; Fischer, G. A.; Doherty, S. P.; Poston, D. I.; Kapernick, R. J.

2006-01-01

In the current 2005 US budget environment, competition for fiscal resources make funding for comprehensive space reactor development programs difficult to justify and accommodate. Simultaneously, the need to develop these systems to provide planetary and deep space-enabling power systems is increasing. Given that environment, designs intended to satisfy reasonable near-term surface missions, using affordable technology-ready materials and processes warrant serious consideration. An initial lunar application design incorporating a stainless structure, 880 K pumped NaK coolant system and a stainless/UO2 fuel system can be designed, fabricated and tested for a fraction of the cost of recent high-profile reactor programs (JIMO, SP-100). Along with the cost reductions associated with the use of qualified materials and processes, this design offers a low-risk, high-reliability implementation associated with mission specific low temperature, low burnup, five year operating lifetime requirements.

Levelized cost of energy for a Backward Bent Duct Buoy

DOE PAGES

Bull, Diana; Jenne, D. Scott; Smith, Christopher S.; ...

2016-07-18

The Reference Model Project, supported by the U.S. Department of Energy, was developed to provide publicly available technical and economic benchmarks for a variety of marine energy converters. The methodology to achieve these benchmarks is to develop public domain designs that incorporate power performance estimates, structural models, anchor and mooring designs, power conversion chain designs, and estimates of the operations and maintenance, installation, and environmental permitting required. The reference model designs are intended to be conservative, robust, and experimentally verified. The Backward Bent Duct Buoy (BBDB) presented in this paper is one of three wave energy conversion devices studied withinmore » the Reference Model Project. Furthermore, comprehensive modeling of the BBDB in a Northern California climate has enabled a full levelized cost of energy (LCOE) analysis to be completed on this device.« less

Nuclear Brayton turboalternator-compressor (TAC) conceptual design study

NASA Technical Reports Server (NTRS)

Mock, E. A.; Davis, J. E.

1972-01-01

A comprehensive analysis and conceptual design study of the turboalternator-compressor components was performed using HeXe as the working fluid. Individual turbine, alternator, compressor, and bearing and seal designs were evaluated. Six turboalternator-compressor TAC configurations were completed. One TAC configuration was evaluated to calculate its performance when operating under new cycle conditions,namely, one higher and one lower turbine inlet temperature and one case with krypton as the working fluid. Based on the results, a TAC configuration that incorporated a radial compressor, a radial turbine, a Lundell Alternator, and gas bearings was selected. A new layout of the TAC was prepared that reflects the cycle state points necessary to accommodate a zirconium hydride moderated reactor and a 400 Hz alternator. The final TAC design rotates at 24,000 rpm and produces 160 kWe, 480V, 3-phase, 400 hertz power.

Levelized cost of energy for a Backward Bent Duct Buoy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bull, Diana; Jenne, D. Scott; Smith, Christopher S.

2016-12-01

The Reference Model Project, supported by the U.S. Department of Energy, was developed to provide publically available technical and economic benchmarks for a variety of marine energy converters. The methodology to achieve these benchmarks is to develop public domain designs that incorporate power performance estimates, structural models, anchor and mooring designs, power conversion chain designs, and estimates of the operations and maintenance, installation, and environmental permitting required. The reference model designs are intended to be conservative, robust, and experimentally verified. The Backward Bent Duct Buoy (BBDB) presented in this paper is one of three wave energy conversion devices studied withinmore » the Reference Model Project. Comprehensive modeling of the BBDB in a Northern California climate has enabled a full levelized cost of energy (LCOE) analysis to be completed on this device.« less

Symptom validity test performance and consistency of self-reported memory functioning of Operation Enduring Freedom/Operation Iraqi freedom veterans with positive Veteran Health Administration Comprehensive Traumatic Brain Injury evaluations.

PubMed

Russo, Arthur C

2012-12-01

Operation Enduring Freedom and Operation Iraqi Freedom combat veterans given definite diagnoses of mild Traumatic Brain Injury (TBI) during the Veteran Health Administration (VHA) Comprehensive TBI evaluation and reporting no post-deployment head injury were examined to assess (a) consistency of self-reported memory impairment and (b) symptom validity test (SVT) performance via a two-part study. Study 1 found that while 49 of 50 veterans reported moderate to very severe memory impairment during the VHA Comprehensive TBI evaluation, only 7 had reported any memory problem at the time of their Department of Defense (DOD) post-deployment health assessment. Study 2 found that of 38 veterans referred for neuropsychological evaluations following a positive VHA Comprehensive TBI evaluation, 68.4% failed the Word Memory Test, a forced choice memory recognition symptom validity task. Together, these studies raise questions concerning the use of veteran symptom self-report for TBI assessments and argue for the inclusion of SVTs and the expanded use of contemporaneous DOD records to improve the diagnostic accuracy of the VHA Comprehensive TBI evaluation.

Use of technology to support information needs for continuity of operations planning in public health: a systematic review.

PubMed

Reeder, Blaine; Turner, Anne; Demiris, George

2010-01-01

Continuity of operations planning focuses on an organization's ability to deliver essential services before, during and after an emergency. Public health leaders must make decisions based on information from many sources and their information needs are often facilitated or hindered by technology. The aim of this study is to provide a systematic review of studies of technology projects that address public health continuity of operations planning information needs and to discuss patterns, themes, and challenges to inform the design of public health continuity of operations information systems. To return a comprehensive results set in an under-explored area, we searched broadly in the Medline and EBSCOHost bibliographic databases using terms from prior work in public health emergency management and continuity of operations planning in other domains. In addition, we manually searched the citation lists of publications included for review. A total of 320 publications were reviewed. Twenty studies were identified for inclusion (twelve risk assessment decision support tools, six network and communications-enabled decision support tools, one training tool and one dedicated video-conferencing tool). Levels of implementation for information systems in the included studies range from proposed frameworks to operational systems. There is a general lack of documented efforts in the scientific literature for technology projects about public health continuity of operations planning. Available information about operational information systems suggest inclusion of public health practitioners in the design process as a factor in system success.

Effect with high density nano dot type storage layer structure on 20 nm planar NAND flash memory characteristics

NASA Astrophysics Data System (ADS)

Sasaki, Takeshi; Muraguchi, Masakazu; Seo, Moon-Sik; Park, Sung-kye; Endoh, Tetsuo

2014-01-01

The merits, concerns and design principle for the future nano dot (ND) type NAND flash memory cell are clarified, by considering the effect of storage layer structure on NAND flash memory characteristics. The characteristics of the ND cell for a NAND flash memory in comparison with the floating gate type (FG) is comprehensively studied through the read, erase, program operation, and the cell to cell interference with device simulation. Although the degradation of the read throughput (0.7% reduction of the cell current) and slower program time (26% smaller programmed threshold voltage shift) with high density (10 × 1012 cm-2) ND NAND are still concerned, the suppress of the cell to cell interference with high density (10 × 1012 cm-2) plays the most important part for scaling and multi-level cell (MLC) operation in comparison with the FG NAND. From these results, the design knowledge is shown to require the control of the number of nano dots rather than the higher nano dot density, from the viewpoint of increasing its memory capacity by MLC operation and suppressing threshold voltage variability caused by the number of dots in the storage layer. Moreover, in order to increase its memory capacity, it is shown the tunnel oxide thickness with ND should be designed thicker (>3 nm) than conventional designed ND cell for programming/erasing with direct tunneling mechanism.

SATS HVO Concept Validation Experiment

NASA Technical Reports Server (NTRS)

Consiglio, Maria; Williams, Daniel; Murdoch, Jennifer; Adams, Catherine

2005-01-01

A human-in-the-loop simulation experiment was conducted at the NASA Langley Research Center s (LaRC) Air Traffic Operations Lab (ATOL) in an effort to comprehensively validate tools and procedures intended to enable the Small Aircraft Transportation System, Higher Volume Operations (SATS HVO) concept of operations. The SATS HVO procedures were developed to increase the rate of operations at non-towered, non-radar airports in near all-weather conditions. A key element of the design is the establishment of a volume of airspace around designated airports where pilots accept responsibility for self-separation. Flights operating at these airports, are given approach sequencing information computed by a ground based automated system. The SATS HVO validation experiment was conducted in the ATOL during the spring of 2004 in order to determine if a pilot can safely and proficiently fly an airplane while performing SATS HVO procedures. Comparative measures of flight path error, perceived workload and situation awareness were obtained for two types of scenarios. Baseline scenarios were representative of today s system utilizing procedure separation, where air traffic control grants one approach or departure clearance at a time. SATS HVO scenarios represented approaches and departure procedures as described in the SATS HVO concept of operations. Results from the experiment indicate that low time pilots were able to fly SATS HVO procedures and maintain self-separation as safely and proficiently as flying today's procedures.

Time series modeling of human operator dynamics in manual control tasks

NASA Technical Reports Server (NTRS)

Biezad, D. J.; Schmidt, D. K.

1984-01-01

A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency responses of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that has not been previously modeled to demonstrate the strengths of the method.

Time Series Modeling of Human Operator Dynamics in Manual Control Tasks

NASA Technical Reports Server (NTRS)

Biezad, D. J.; Schmidt, D. K.

1984-01-01

A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency response of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that was previously modeled to demonstrate the strengths of the method.

Memory Operations and Structures in Sentence Comprehension: Evidence from Ellipsis

ERIC Educational Resources Information Center

Martin, Andrea Eyleen

2010-01-01

Natural language often contains dependencies that span words, phrases, or even sentences. Thus, language comprehension relies on recovering recently processed information from memory for subsequent interpretation. This dissertation investigates the memory operations that subserve dependency resolution through the lens of "verb-phrase ellipsis"…

Implementation of a best management practice (BMP) system for a clay mining facility in Taiwan.

PubMed

Lin, Jen-Yang; Chen, Yen-Chang; Chen, Walter; Lee, Tsu-Chuan; Yu, Shaw L

2006-01-01

The present paper describes the planning and implementation of a best management practice (BMP) system for a clay mining facility in Northern Taiwan. It is a challenge to plan and design BMPs for mitigating the impact of clay mining operations due to the fact that clay mining drainage typically contains very high concentrations of suspended solids (SS), Fe-ions, and [H+] concentrations. In the present study, a field monitoring effort was conducted to collect data for runoff quality and quantity from a clay mining area in Northern Taiwan. A BMP system including holding ponds connected in series was designed and implemented and its pollutant removal performance was assessed. The assessment was based on mass balance computations and an analysis of the relationship between BMP design parameters such as pond depth, detention time, surface loading rate, etc. and the pollutant removal efficiency. Field sampling results showed that the surface-loading rate is exponential related to the removing rate. The results provide the basis for a more comprehensive and efficient BMP implementation plan for clay mining operations.

Power Converter Control Algorithm Design and Simulation for the NREL Next-Generation Drivetrain: July 8, 2013 - January 7, 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blodgett, Douglas; Behnke, Michael; Erdman, William

The National Renewable Energy Laboratory (NREL) and NREL Next-Generation Drivetrain Partners are developing a next-generation drivetrain (NGD) design as part of a Funding Opportunity Announcement award from the U.S. Department of Energy. The proposed NGD includes comprehensive innovations to the gearbox, generator, and power converter that increase the gearbox reliability and drivetrain capacity, while lowering deployment and operation and maintenance costs. A key task within this development effort is the power converter fault control algorithm design and associated computer simulations using an integrated electromechanical model of the drivetrain. The results of this task will be used in generating the embeddedmore » control software to be utilized in the power converter during testing of the NGD in the National Wind Technology Center 2.5-MW dynamometer. A list of issues to be addressed with these algorithms was developed by review of the grid interconnection requirements of various North American transmission system operators, and those requirements that presented the greatest impact to the wind turbine drivetrain design were then selected for mitigation via power converter control algorithms.« less

20 CFR 632.13 - Review of denial of designation as a Native American grantee, or rejection of a Comprehensive...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Review of denial of designation as a Native American grantee, or rejection of a Comprehensive Annual Plan. 632.13 Section 632.13 Employees' Benefits... designation as a Native American grantee, or rejection of a Comprehensive Annual Plan. (a) An applicant for...

NASA/USRA University Advanced Design Program Fourth Annual Summer Conference

NASA Technical Reports Server (NTRS)

Alred, John

1988-01-01

The study topics cover a broad range of potential space and aeronautics projects which could be undertaken during a 20-30 year period beginning with the Space Station Initial Operating Configuration scheduled for the mid 1990's. Both manned and unmanned endeavors are embraced, and the systems approach to the design problem is emphasized. The student teams pursue the chosen problem during their senior year in a one or two semester capstone design course and submit a comprehensive written report at the conclusion of the project. Finally, student representatives from each of the universities summarize their work in oral presentations at the annual Summer Conference, held at one of the NASA centers and attended by the university faculty, NASA and USRA personnel, and aerospace industry representatives.

A survey of signal processing algorithms in brain-computer interfaces based on electrical brain signals.

PubMed

Bashashati, Ali; Fatourechi, Mehrdad; Ward, Rabab K; Birch, Gary E

2007-06-01

Brain-computer interfaces (BCIs) aim at providing a non-muscular channel for sending commands to the external world using the electroencephalographic activity or other electrophysiological measures of the brain function. An essential factor in the successful operation of BCI systems is the methods used to process the brain signals. In the BCI literature, however, there is no comprehensive review of the signal processing techniques used. This work presents the first such comprehensive survey of all BCI designs using electrical signal recordings published prior to January 2006. Detailed results from this survey are presented and discussed. The following key research questions are addressed: (1) what are the key signal processing components of a BCI, (2) what signal processing algorithms have been used in BCIs and (3) which signal processing techniques have received more attention?

TOPICAL REVIEW: A survey of signal processing algorithms in brain computer interfaces based on electrical brain signals

NASA Astrophysics Data System (ADS)

Bashashati, Ali; Fatourechi, Mehrdad; Ward, Rabab K.; Birch, Gary E.

2007-06-01

Brain computer interfaces (BCIs) aim at providing a non-muscular channel for sending commands to the external world using the electroencephalographic activity or other electrophysiological measures of the brain function. An essential factor in the successful operation of BCI systems is the methods used to process the brain signals. In the BCI literature, however, there is no comprehensive review of the signal processing techniques used. This work presents the first such comprehensive survey of all BCI designs using electrical signal recordings published prior to January 2006. Detailed results from this survey are presented and discussed. The following key research questions are addressed: (1) what are the key signal processing components of a BCI, (2) what signal processing algorithms have been used in BCIs and (3) which signal processing techniques have received more attention?

Comprehensive analysis of transport aircraft flight performance

NASA Astrophysics Data System (ADS)

Filippone, Antonio

2008-04-01

This paper reviews the state-of-the art in comprehensive performance codes for fixed-wing aircraft. The importance of system analysis in flight performance is discussed. The paper highlights the role of aerodynamics, propulsion, flight mechanics, aeroacoustics, flight operation, numerical optimisation, stochastic methods and numerical analysis. The latter discipline is used to investigate the sensitivities of the sub-systems to uncertainties in critical state parameters or functional parameters. The paper discusses critically the data used for performance analysis, and the areas where progress is required. Comprehensive analysis codes can be used for mission fuel planning, envelope exploration, competition analysis, a wide variety of environmental studies, marketing analysis, aircraft certification and conceptual aircraft design. A comprehensive program that uses the multi-disciplinary approach for transport aircraft is presented. The model includes a geometry deck, a separate engine input deck with the main parameters, a database of engine performance from an independent simulation, and an operational deck. The comprehensive code has modules for deriving the geometry from bitmap files, an aerodynamics model for all flight conditions, a flight mechanics model for flight envelopes and mission analysis, an aircraft noise model and engine emissions. The model is validated at different levels. Validation of the aerodynamic model is done against the scale models DLR-F4 and F6. A general model analysis and flight envelope exploration are shown for the Boeing B-777-300 with GE-90 turbofan engines with intermediate passenger capacity (394 passengers in 2 classes). Validation of the flight model is done by sensitivity analysis on the wetted area (or profile drag), on the specific air range, the brake-release gross weight and the aircraft noise. A variety of results is shown, including specific air range charts, take-off weight-altitude charts, payload-range performance, atmospheric effects, economic Mach number and noise trajectories at F.A.R. landing points.

Design of power cable grounding wire anti-theft monitoring system

NASA Astrophysics Data System (ADS)

An, Xisheng; Lu, Peng; Wei, Niansheng; Hong, Gang

2018-01-01

In order to prevent the serious consequences of the power grid failure caused by the power cable grounding wire theft, this paper presents a GPRS based power cable grounding wire anti-theft monitoring device system, which includes a camera module, a sensor module, a micro processing system module, and a data monitoring center module, a mobile terminal module. Our design utilize two kinds of methods for detecting and reporting comprehensive image, it can effectively solve the problem of power and cable grounding wire box theft problem, timely follow-up grounded cable theft events, prevent the occurrence of electric field of high voltage transmission line fault, improve the reliability of the safe operation of power grid.

An Overview of the Jupiter Europa Orbiter Concept's Europa Science Phase Orbit Design

NASA Technical Reports Server (NTRS)

Lock, Robert E.; Ludwinski, Jan M.; Petropoulos, Anastassios E.; Clark, Karla B.; Pappalardo, Robert T.

2009-01-01

Jupiter Europa Orbiter (JEO), the proposed NASA element of the proposed joint NASA-ESA Europa Jupiter System Mission (EJSM), could launch in February 2020 and conceivably arrive at Jupiter in December of 2025. The concept is to perform a multi-year study of Europa and the Jupiter system, including 30 months of Jupiter system science and a comprehensive Europa orbit phase of 9 months. This paper provides an overview of the JEO concept and describes the Europa Science phase orbit design and the related science priorities, model pay-load and operations scenarios needed to conduct the Europa Science phase. This overview is for planning and discussion purposes only.

Interface circuit for a multiple-beam tuning-fork gyroscope with high quality factors

NASA Astrophysics Data System (ADS)

Wang, Ren

This research work presents the design, theoretical analysis, fabrication, interface electronics, and experimental results of a Silicon-On-Insulator (SOI) based Multiple-Beam Tuning-Fork Gyroscope (MB-TFG). Based on a numerical model of Thermo-Elastic Damping (TED), a Multiple-Beam Tuning-Fork Structure (MB-TFS) is designed with high Quality factors (Qs) in its two operation modes. A comprehensive theoretical analysis of the MB-TFG design is conducted to relate the design parameters to its operation parameters and further performance parameters. In conjunction with a mask that defines the device through trenches to alleviate severe fabrication effect on anchor loss, a simple one-mask fabrication process is employed to implement this MB-TFG design on SOI wafers. The fabricated MB-TFGs are tested with PCB-level interface electronics and a thorough comparison between the experimental results and a theoretical analysis is conducted to verify the MB-TFG design and accurately interpret the measured performance. The highest measured Qs of the fabricated MB-TFGs in vacuum are 255,000 in the drive-mode and 103,000 in the sense-mode, at a frequency of 15.7kHz. Under a frequency difference of 4Hz between the two modes (operation frequency is 16.8kHz) and a drive-mode vibration amplitude of 3.0um, the measured rate sensitivity is 80mVpp/°/s with an equivalent impedance of 6MQ. The calculated overall rate resolution of this device is 0.37/hrhiElz, while the measured Angle Random Walk (ARW) and bias instability are 6.67°/'vhr and 95°/hr, respectively.

On the design and operation of primary settling tanks in state of the art wastewater treatment and water resources recovery.

PubMed

Patziger, Miklos; Günthert, Frank Wolfgang; Jardin, Norbert; Kainz, Harald; Londong, Jörg

2016-11-01

In state of the art wastewater treatment, primary settling tanks (PSTs) are considered as an integral part of the biological wastewater and sludge treatment process, as well as of the biogas and electric energy production. Consequently they strongly influence the efficiency of the entire wastewater treatment plant. However, in the last decades the inner physical processes of PSTs, largely determining their efficiency, have been poorly addressed. In common practice PSTs are still solely designed and operated based on the surface overflow rate and the hydraulic retention time (HRT) as a black box. The paper shows the results of a comprehensive investigation programme, including 16 PSTs. Their removal efficiency and inner physical processes (like the settling process of primary sludge), internal flow structures within PSTs and their impact on performance were investigated. The results show that: (1) the removal rates of PSTs are generally often underestimated in current design guidelines, (2) the removal rate of different PSTs shows a strongly fluctuating pattern even in the same range of the HRT, and (3) inlet design of PSTs becomes highly relevant in the removal efficiency at rather high surface overflow rates, above 5 m/h, which is the upper design limit of PSTs for dry weather load.

Stockpiling and Comprehensive Utilization of Red Mud Research Progress

PubMed Central

Liu, Dong-Yan; Wu, Chuan-Sheng

2012-01-01

With increasing production of red mud, the environmental problems caused by it are increasingly serious, and thus the integrated treatment of red mud is imminent. This article provides an overview of the composition and the basic characteristics of red mud. The research progress of safe stockpiling and comprehensive utilization of red mud is summarized. The safe stockpiling of red mud can be divided into two aspects: the design and safe operation of the stocking yard. The comprehensive utilization of red mud can be further divided into three aspects: the effective recycling of components, resource utilization and application in the field of environmental protection. This paper points out that the main focus of previous studies on red mud stockpiling is cost reproduction and land tenure. The recovery of resources from red mud has a high value-added, but low level industrialization. The use of red mud as a building material and filler material is the most effective way to reduce the stockpiling of red mud. Red mud used for environmental remediation materials is a new hotspot and worth promoting for its simple processing and low cost.

Mixed oxidizer hybrid propulsion system optimization under uncertainty using applied response surface methodology and Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Whitehead, James Joshua

The analysis documented herein provides an integrated approach for the conduct of optimization under uncertainty (OUU) using Monte Carlo Simulation (MCS) techniques coupled with response surface-based methods for characterization of mixture-dependent variables. This novel methodology provides an innovative means of conducting optimization studies under uncertainty in propulsion system design. Analytic inputs are based upon empirical regression rate information obtained from design of experiments (DOE) mixture studies utilizing a mixed oxidizer hybrid rocket concept. Hybrid fuel regression rate was selected as the target response variable for optimization under uncertainty, with maximization of regression rate chosen as the driving objective. Characteristic operational conditions and propellant mixture compositions from experimental efforts conducted during previous foundational work were combined with elemental uncertainty estimates as input variables. Response surfaces for mixture-dependent variables and their associated uncertainty levels were developed using quadratic response equations incorporating single and two-factor interactions. These analysis inputs, response surface equations and associated uncertainty contributions were applied to a probabilistic MCS to develop dispersed regression rates as a function of operational and mixture input conditions within design space. Illustrative case scenarios were developed and assessed using this analytic approach including fully and partially constrained operational condition sets over all of design mixture space. In addition, optimization sets were performed across an operationally representative region in operational space and across all investigated mixture combinations. These scenarios were selected as representative examples relevant to propulsion system optimization, particularly for hybrid and solid rocket platforms. Ternary diagrams, including contour and surface plots, were developed and utilized to aid in visualization. The concept of Expanded-Durov diagrams was also adopted and adapted to this study to aid in visualization of uncertainty bounds. Regions of maximum regression rate and associated uncertainties were determined for each set of case scenarios. Application of response surface methodology coupled with probabilistic-based MCS allowed for flexible and comprehensive interrogation of mixture and operating design space during optimization cases. Analyses were also conducted to assess sensitivity of uncertainty to variations in key elemental uncertainty estimates. The methodology developed during this research provides an innovative optimization tool for future propulsion design efforts.

A pdf-Free Change Detection Test Based on Density Difference Estimation.

PubMed

Bu, Li; Alippi, Cesare; Zhao, Dongbin

2018-02-01

The ability to detect online changes in stationarity or time variance in a data stream is a hot research topic with striking implications. In this paper, we propose a novel probability density function-free change detection test, which is based on the least squares density-difference estimation method and operates online on multidimensional inputs. The test does not require any assumption about the underlying data distribution, and is able to operate immediately after having been configured by adopting a reservoir sampling mechanism. Thresholds requested to detect a change are automatically derived once a false positive rate is set by the application designer. Comprehensive experiments validate the effectiveness in detection of the proposed method both in terms of detection promptness and accuracy.

Research of ad hoc network based on SINCGARS network

NASA Astrophysics Data System (ADS)

Nie, Hao; Cai, Xiaoxia; Chen, Hong; Chen, Jian; Weng, Pengfei

2016-03-01

In today's world, science and technology make a spurt of progress, so society has entered the era of information technology, network. Only the comprehensive use of electronic warfare and network warfare means can we maximize their access to information and maintain the information superiority. Combined with the specific combat mission and operational requirements, the research design and construction in accordance with the actual military which are Suitable for the future of information technology needs of the tactical Adhoc network, tactical internet, will greatly improve the operational efficiency of the command of the army. Through the study of the network of the U.S. military SINCGARS network, it can explore the routing protocol and mobile model, to provide a reference for the research of our army network.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, S.R.

A comprehensive evaluation was conducted of the radiation protection practices and programs at prototype LMFBRs with long operational experience. Installations evaluated were the Fast Flux Test Facility (FFTF), Richland, Washington; Experimental Breeder Reactor II (EBR-II), Idaho Falls, Idaho; Prototype Fast Reactor (PFR) Dounreay, Scotland; Phenix, Marcoule, France; and Kompakte Natriumgekuhlte Kernreak Toranlange (KNK II), Karlsruhe, Federal Republic of Germany. The evaluation included external and internal exposure control, respiratory protection procedures, radiation surveillance practices, radioactive waste management, and engineering controls for confining radiation contamination. The theory, design, and operating experience at LMFBRs is described. Aspects of LMFBR health physics different frommore » the LWR experience in the United States are identified. Suggestions are made for modifications to the NRC Standard Review Plan based on the differences.« less

Automation design and crew coordination

NASA Technical Reports Server (NTRS)

Segal, Leon D.

1993-01-01

Advances in technology have greatly impacted the appearance of the modern aircraft cockpit. Where once one would see rows upon rows. The introduction of automation has greatly altered the demands on the pilots and the dynamics of aircrew task performance. While engineers and designers continue to implement the latest technological innovations in the cockpit - claiming higher reliability and decreased workload - a large percentage of aircraft accidents are still attributed to human error. Rather than being the main instigators of accidents, operators tend to be the inheritors of system defects created by poor design, incorrect installation, faulty maintenance and bad management decisions. This paper looks at some of the variables that need to be considered if we are to eliminate at least one of these inheritances - poor design. Specifically, this paper describes the first part of a comprehensive study aimed at identifying the effects of automation on crew coordination.

Low-cost failure sensor design and development for water pipeline distribution systems.

PubMed

Khan, K; Widdop, P D; Day, A J; Wood, A S; Mounce, S R; Machell, J

2002-01-01

This paper describes the design and development of a new sensor which is low cost to manufacture and install and is reliable in operation with sufficient accuracy, resolution and repeatability for use in newly developed systems for pipeline monitoring and leakage detection. To provide an appropriate signal, the concept of a "failure" sensor is introduced, in which the output is not necessarily proportional to the input, but is unmistakably affected when an unusual event occurs. The design of this failure sensor is based on the water opacity which can be indicative of an unusual event in a water distribution network. The laboratory work and field trials necessary to design and prove out this type of failure sensor are described here. It is concluded that a low-cost failure sensor of this type has good potential for use in a comprehensive water monitoring and management system based on Artificial Neural Networks (ANN).

A study of waste and delivery valve design modification to the pump performance

NASA Astrophysics Data System (ADS)

Harith, M. N.; Bakar, R. A.; Ramasamy, D.; Kardigama, K.; Quanjin, Ma

2018-04-01

This paper objective is to share design revolution of waste and delivery valve that contribute to the overall pump performance. In this paper, 3 new designs of waste and delivery valve pump are presented with comprehensive internal flow analysis using computational fluid dynamics (CFD) simulation over 4 cases that have been deeply study for one of the design chosen. 4 cases involving opening and closing both valve or either one. 0.265m height size of customized waste valve with an opening limiter and spring was used to demonstrate cyclic closing and opening valve operation extended up to 0.164m gap. Based on result, this characteristics contribute to 10-20% waste water reduction and enhancement of flow rate height up to 80m. Apart from that this paper also share some of pressure (dynamic, total, static), velocity (x, y, z axis) simulation including the vector flow were under different flow cases.

Computer-aided design and manufacturing of surgical templates and their clinical applications: a review.

PubMed

Chen, Xiaojun; Xu, Lu; Wang, Wei; Li, Xing; Sun, Yi; Politis, Constantinus

2016-09-01

The surgical template is a guide aimed at directing the implant placement, tumor resection, osteotomy and bone repositioning. Using it, preoperative planning can be transferred to the actual surgical site, and the precision, safety and reliability of the surgery can be improved. However, the actual workflow of the surgical template design and manufacturing is quite complicated before the final clinical application. The major goal of the paper is to provide a comprehensive reference source of the current and future development of the template design and manufacturing for relevant researchers. Expert commentary: This paper aims to present a review of the necessary procedures in the template-guided surgery including the image processing, 3D visualization, preoperative planning, surgical guide design and manufacturing. In addition, the template-guided clinical applications for various kinds of surgeries are reviewed, and it demonstrated that the precision of the surgery has been improved compared with the non-guided operations.

Core concepts of spatial prioritisation in systematic conservation planning.

PubMed

Kukkala, Aija S; Moilanen, Atte

2013-05-01

Systematic conservation planning (SCP) is a field of conservation biology concerned with delivering on-the-ground actions that achieve conservation goals. It describes a set of operational models that cover both design and implementation of conservation, with a strong focus on mobilising the collective action typically required to implement conservation. SCP, as it was originally described, was composed of six different stages: collection of data, identification of conservation goals, evaluation of the existing protected area network, design of expansions, implementation of conservation action, and long-term maintenance of biodiversity in the network. Since then, the operational model has been expanded into several different variants. Conservation actions applied inside SCP include establishment and expansion of reserve networks and allocation of habitat restoration and management. Within the broader context of SCP, there is a fundamental biogeographic-economic analysis frequently called spatial conservation prioritisation or conservation assessment, which is used for identifying where important areas for biodiversity are and how conservation goals might be achieved efficiently. Here, we review the usage and meaning of the 12 biogeographic-economic core concepts of SCP: adequacy, complementarity, comprehensiveness, effectiveness, efficiency, flexibility, irreplaceability, replacement cost, representation, representativeness, threat, and vulnerability. Some of the concepts have clear definitions whereas others may have alternative and possibly conflicting definitions. With a comprehensive literature review literature, we elucidate the historical backgrounds of these concepts, the first definitions and usages, alternative later definitions, key applications, and prior reviews. This review reduces linguistic uncertainty in the application of SCP. Since SCP is a global activity with a multitude of different stakeholders involved, it is vital that those involved can speak the same language. Through these concepts, this review serves as a source of information about the historical development of SCP. It provides a comprehensive review for anyone wishing to understand the key concepts of spatial prioritisation within SCP. © 2012 The Authors. Biological Reviews © 2012 Cambridge Philosophical Society.

Core concepts of spatial prioritisation in systematic conservation planning

PubMed Central

Kukkala, Aija S; Moilanen, Atte

2013-01-01

Systematic conservation planning (SCP) is a field of conservation biology concerned with delivering on-the-ground actions that achieve conservation goals. It describes a set of operational models that cover both design and implementation of conservation, with a strong focus on mobilising the collective action typically required to implement conservation. SCP, as it was originally described, was composed of six different stages: collection of data, identification of conservation goals, evaluation of the existing protected area network, design of expansions, implementation of conservation action, and long-term maintenance of biodiversity in the network. Since then, the operational model has been expanded into several different variants. Conservation actions applied inside SCP include establishment and expansion of reserve networks and allocation of habitat restoration and management. Within the broader context of SCP, there is a fundamental biogeographic-economic analysis frequently called spatial conservation prioritisation or conservation assessment, which is used for identifying where important areas for biodiversity are and how conservation goals might be achieved efficiently. Here, we review the usage and meaning of the 12 biogeographic-economic core concepts of SCP: adequacy, complementarity, comprehensiveness, effectiveness, efficiency, flexibility, irreplaceability, replacement cost, representation, representativeness, threat, and vulnerability. Some of the concepts have clear definitions whereas others may have alternative and possibly conflicting definitions. With a comprehensive literature review literature, we elucidate the historical backgrounds of these concepts, the first definitions and usages, alternative later definitions, key applications, and prior reviews. This review reduces linguistic uncertainty in the application of SCP. Since SCP is a global activity with a multitude of different stakeholders involved, it is vital that those involved can speak the same language. Through these concepts, this review serves as a source of information about the historical development of SCP. It provides a comprehensive review for anyone wishing to understand the key concepts of spatial prioritisation within SCP. PMID:23279291

50 CFR 80.81 - What must an agency submit when applying for a comprehensive-management-system grant?

Code of Federal Regulations, 2011 CFR

2011-10-01

... of the agency's comprehensive management system including inventory, strategic plan, operational plan... for a comprehensive-management-system grant? 80.81 Section 80.81 Wildlife and Fisheries UNITED STATES... when applying for a comprehensive-management-system grant? A State fish and wildlife agency must submit...

Arrhythmias Following Comprehensive Stage II Surgical Palliation in Single Ventricle Patients.

PubMed

Wilhelm, Carolyn M; Paulus, Diane; Cua, Clifford L; Kertesz, Naomi J; Cheatham, John P; Galantowicz, Mark; Fernandez, Richard P

2016-03-01

Post-operative arrhythmias are common in pediatric patients following cardiac surgery. Following hybrid palliation in single ventricle patients, a comprehensive stage II palliation is performed. The incidence of arrhythmias in patients following comprehensive stage II palliation is unknown. The purpose of this study is to determine the incidence of arrhythmias following comprehensive stage II palliation. A single-center retrospective chart review was performed on all single ventricle patients undergoing a comprehensive stage II palliation from January 2010 to May 2014. Pre-operative, operative, and post-operative data were collected. A clinically significant arrhythmia was defined as an arrhythmia which led to cardiopulmonary resuscitation or required treatment with either pacing or antiarrhythmic medication. Statistical analysis was performed with Wilcoxon rank-sum test and Fisher's exact test with p < 0.05 significant. Forty-eight single ventricle patients were reviewed (32 hypoplastic left heart syndrome, 16 other single ventricle variants). Age at surgery was 185 ± 56 days. Cardiopulmonary bypass time was 259 ± 45 min. Average vasoactive-inotropic score was 5.97 ± 7.58. Six patients (12.5 %) had clinically significant arrhythmias: four sinus bradycardia, one 2:1 atrioventricular block, and one slow junctional rhythm. No tachyarrhythmias were documented for this patient population. Presence of arrhythmia was associated with elevated lactate (p = 0.04) and cardiac arrest (p = 0.002). Following comprehensive stage II palliation, single ventricle patients are at low risk for development of tachyarrhythmias. The most frequent arrhythmia seen in these patients was sinus bradycardia associated with respiratory compromise.

Towards the Integration of APECS with VE-Suite to Create a Comprehensive Virtual Engineering Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCorkle, D.; Yang, C.; Jordan, T.

2007-06-01

Modeling and simulation tools are becoming pervasive in the process engineering practice of designing advanced power generation facilities. These tools enable engineers to explore many what-if scenarios before cutting metal or constructing a pilot scale facility. While such tools enable investigation of crucial plant design aspects, typical commercial process simulation tools such as Aspen Plus®, gPROMS®, and HYSYS® still do not explore some plant design information, including computational fluid dynamics (CFD) models for complex thermal and fluid flow phenomena, economics models for policy decisions, operational data after the plant is constructed, and as-built information for use in as-designed models. Softwaremore » tools must be created that allow disparate sources of information to be integrated if environments are to be constructed where process simulation information can be accessed. At the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), the Advanced Process Engineering Co-Simulator (APECS) has been developed as an integrated software suite that combines process simulation (e.g., Aspen Plus) and high-fidelity equipment simulation (e.g., Fluent® CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper, we discuss the initial phases of integrating APECS with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite utilizes the ActiveX (OLE Automation) controls in Aspen Plus wrapped by the CASI library developed by Reaction Engineering International to run the process simulation and query for unit operation results. This integration permits any application that uses the VE-Open interface to integrate with APECS co-simulations, enabling construction of the comprehensive virtual engineering environment needed for the rapid engineering of advanced power generation facilities.« less

Simulating Activities: Relating Motives, Deliberation and Attentive Coordination

NASA Technical Reports Server (NTRS)

Clancey, William J.; Clancy, Daniel (Technical Monitor)

2002-01-01

Activities are located behaviors, taking time, conceived as socially meaningful, and usually involving interaction with tools and the environment. In modeling human cognition as a form of problem solving (goal-directed search and operator sequencing), cognitive science researchers have not adequately studied "off-task" activities (e.g., waiting), non-intellectual motives (e.g., hunger), sustaining a goal state (e.g., playful interaction), and coupled perceptual-motor dynamics (e.g., following someone). These aspects of human behavior have been considered in bits and pieces in past research, identified as scripts, human factors, behavior settings, ensemble, flow experience, and situated action. More broadly, activity theory provides a comprehensive framework relating motives, goals, and operations. This paper ties these ideas together, using examples from work life in a Canadian High Arctic research station. The emphasis is on simulating human behavior as it naturally occurs, such that "working" is understood as an aspect of living. The result is a synthesis of previously unrelated analytic perspectives and a broader appreciation of the nature of human cognition. Simulating activities in this comprehensive way is useful for understanding work practice, promoting learning, and designing better tools, including human-robot systems.

Behavioral toxicology of carbon disulfide and toluene.

PubMed Central

Weiss, B; Wood, R W; Macys, D A

1979-01-01

Organic solvents are pervasive in the communal and industrial environments. Although many are potent central nervous system agents, clearly delineated behavioral effects have played only a minor role in the formation of exposure standards. A comprehensive behavioral pharmacology and toxicology of these compounds is one aim of US/USSR collaboration. The current report describes some actions of carbon disulfide and toulene. Earlier data about the actions of carbon disulfide on pigeon operant performance indicated disruption of schedule-controlled key-pecking. Primate data are now described from a situation designed to determine aversive thresholds to electrical stimulation. Effective concentrations of carbon disulfide produced both a rise in the amount of electric shock tolerated and a diminution of the response force exerted by the monkeys. In experiments with toluene, pigeons were shown to elevate key-pecking rate in an operant situation at certain concentrations. Toluene also was studied for its capacity to maintain self-administration in the same way as drugs of abuse. Monkeys worked to gain access to toulene vapor just as they work for opiates or amphetamines. The current experiments demonstrate how comprehensive the range of behavioral toxicology needs to be to deal with environmental health issues. Images FIGURE 3. FIGURE 5. PMID:109294

Seeing beyond monitors-Critical care nurses' multiple skills in patient observation: Descriptive qualitative study.

PubMed

Alastalo, Mika; Salminen, Leena; Lakanmaa, Riitta-Liisa; Leino-Kilpi, Helena

2017-10-01

The aim of this study was to provide a comprehensive description of multiple skills in patient observation in critical care nursing. Data from semi-structured interviews were analysed using thematic analysis. Experienced critical care nurses (n=20) from three intensive care units in two university hospitals in Finland. Patient observation skills consist of: information gaining skills, information processing skills, decision-making skills and co-operation skills. The first three skills are integrated in the patient observation process, in which gaining information is a prerequisite for processing information that precedes making decisions. Co-operation has a special role as it occurs throughout the process. This study provided a comprehensive description of patient observation skills related to the three-phased patient observation process. The findings contribute to clarifying this part of the competence. The description of patient observation skills may be applied in both clinical practice and education as it may serve as a framework for orientation, ensuring clinical skills and designing learning environments. Based on this study, patient observation skills can be recommended to be included in critical care nursing education, orientation and as a part of critical care nurses' competence evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Artificial Intelligence (AI), Operations Research (OR), and Decision Support Systems (DSS): A conceptual framework

NASA Technical Reports Server (NTRS)

Parnell, Gregory S.; Rowell, William F.; Valusek, John R.

1987-01-01

In recent years there has been increasing interest in applying the computer based problem solving techniques of Artificial Intelligence (AI), Operations Research (OR), and Decision Support Systems (DSS) to analyze extremely complex problems. A conceptual framework is developed for successfully integrating these three techniques. First, the fields of AI, OR, and DSS are defined and the relationships among the three fields are explored. Next, a comprehensive adaptive design methodology for AI and OR modeling within the context of a DSS is described. These observations are made: (1) the solution of extremely complex knowledge problems with ill-defined, changing requirements can benefit greatly from the use of the adaptive design process, (2) the field of DSS provides the focus on the decision making process essential for tailoring solutions to these complex problems, (3) the characteristics of AI, OR, and DSS tools appears to be converging rapidly, and (4) there is a growing need for an interdisciplinary AI/OR/DSS education.

The creation and early implementation of a high speed fiber optic network for a university health sciences center.

PubMed Central

Schueler, J. D.; Mitchell, J. A.; Forbes, S. M.; Neely, R. C.; Goodman, R. J.; Branson, D. K.

1991-01-01

In late 1989 the University of Missouri Health Sciences Center began the process of creating an extensive fiber optic network throughout its facilities, with the intent to provide networked computer access to anyone in the Center desiring such access, regardless of geographic location or organizational affiliation. A committee representing all disciplines within the Center produced and, in conjunction with independent consultants, approved a comprehensive design for the network. Installation of network backbone components commenced in the second half of 1990 and was completed in early 1991. As the network entered its initial phases of operation, the first realities of this important new resource began to manifest themselves as enhanced functional capacity in the Health Sciences Center. This paper describes the development of the network, with emphasis on its design criteria, installation, early operation, and management. Also included are discussions on its organizational impact and its evolving significance as a medical community resource. PMID:1807660

Single Case Design Elements in Text Comprehension Research for Students with Developmental Disabilities

ERIC Educational Resources Information Center

Snyder, Sara M.; Knight, Victoria F.; Ayres, Kevin M.; Mims, Pamela J.; Sartini, Emily C.

2017-01-01

Recently researchers have begun exploring the efficacy of interventions designed to improve text comprehension skills for students with developmental disabilities (DD). Text comprehension is essential for understanding academic content as students with disabilities make progress in the general education curriculum. This article focuses on single…

An Integrated Assessment of Location-Dependent Scaling for Microalgae Biofuel Production Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Andre M.; Abodeely, Jared; Skaggs, Richard

Successful development of a large-scale microalgae-based biofuels industry requires comprehensive analysis and understanding of the feedstock supply chain—from facility siting/design through processing/upgrading of the feedstock to a fuel product. The evolution from pilot-scale production facilities to energy-scale operations presents many multi-disciplinary challenges, including a sustainable supply of water and nutrients, operational and infrastructure logistics, and economic competitiveness with petroleum-based fuels. These challenges are addressed in part by applying the Integrated Assessment Framework (IAF)—an integrated multi-scale modeling, analysis, and data management suite—to address key issues in developing and operating an open-pond facility by analyzing how variability and uncertainty in space andmore » time affect algal feedstock production rates, and determining the site-specific “optimum” facility scale to minimize capital and operational expenses. This approach explicitly and systematically assesses the interdependence of biofuel production potential, associated resource requirements, and production system design trade-offs. The IAF was applied to a set of sites previously identified as having the potential to cumulatively produce 5 billion-gallons/year in the southeastern U.S. and results indicate costs can be reduced by selecting the most effective processing technology pathway and scaling downstream processing capabilities to fit site-specific growing conditions, available resources, and algal strains.« less

Mapping telemedicine efforts: surveying regional initiatives in Denmark.

PubMed

Kierkegaard, Patrick

2015-05-01

The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies are being utilized? What medical disciplines are being supported using telemedicine systems? All data were surveyed from the Telemedicinsk Landkort, a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. The results of this study suggest that a growing numbers of telemedicine initiatives are currently in operation across Denmark but that considerable variations exist in terms of regional efforts as the number of operational telemedicine projects varied from region to region. The results of this study provide a timely picture of the factors that are shaping the telemedicine landscape of Denmark and suggest potential strategies to help policymakers increase and improve national telemedicine deployment.

To Demonstrate an Integrated Solution for Plasma-Material Interfaces Compatible with an Optimized Core Plasma

NASA Astrophysics Data System (ADS)

Goldston, Robert; Brooks, Jeffrey; Hubbard, Amanda; Leonard, Anthony; Lipschultz, Bruce; Maingi, Rajesh; Ulrickson, Michael; Whyte, Dennis

2009-11-01

The plasma facing components in a Demo reactor will face much more extreme boundary plasma conditions and operating requirements than any present or planned experiment. These include 1) Power density a factor of four or more greater than in ITER, 2) Continuous operation resulting in annual energy and particle throughput 100-200 times larger than ITER, 3) Elevated surface operating temperature for efficient electricity production, 4) Tritium fuel cycle control for safety and breeding requirements, and 5) Steady state plasma confinement and control. Consistent with ReNeW Thrust 12, design options are being explored for a new moderate-scale facility to assess core-edge interaction issues and solutions. Key desired features include high power density, sufficient pulse length and duty cycle, elevated wall temperature, steady-state control of an optimized core plasma, and flexibility in changing boundary components as well as access for comprehensive measurements.

A simulation model for wind energy storage systems. Volume 2: Operation manual

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

1977-01-01

A comprehensive computer program (SIMWEST) developed for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel, and pneumatic) is described. Features of the program include: a precompiler which generates computer models (in FORTRAN) of complex wind source/storage/application systems, from user specifications using the respective library components; a program which provides the techno-economic system analysis with the respective I/O the integration of system dynamics, and the iteration for conveyance of variables; and capability to evaluate economic feasibility as well as general performance of wind energy systems. The SIMWEST operation manual is presented and the usage of the SIMWEST program and the design of the library components are described. A number of example simulations intended to familiarize the user with the program's operation is given along with a listing of each SIMWEST library subroutine.

The front end test stand high performance H- ion source at Rutherford Appleton Laboratory.

PubMed

Faircloth, D C; Lawrie, S; Letchford, A P; Gabor, C; Wise, P; Whitehead, M; Wood, T; Westall, M; Findlay, D; Perkins, M; Savage, P J; Lee, D A; Pozimski, J K

2010-02-01

The aim of the front end test stand (FETS) project is to demonstrate that chopped low energy beams of high quality can be produced. FETS consists of a 60 mA Penning Surface Plasma Ion Source, a three solenoid low energy beam transport, a 3 MeV radio frequency quadrupole, a chopper, and a comprehensive suite of diagnostics. This paper details the design and initial performance of the ion source and the laser profile measurement system. Beam current, profile, and emittance measurements are shown for different operating conditions.

Qualitative investigation of booster recovery in open sea

NASA Technical Reports Server (NTRS)

Beck, P. E.

1973-01-01

Limited tests were conducted using 1/27 scale model of a Titan 3C booster plus 1/32.9 and 1/15.6 scale models of a solid rocket booster case to establish some of the characteristics that will effect recovery operations in open seas. This preliminary effort was designed to provide additional background information for conceptual development of a waterborne recovery system for space shuttle boosters, pending initiation of comprehensive studies. The models were not instrumented; therefore, all data are qualitative (approximations) and are based on observations plus photographic coverage.

Feasibility Study for an Air Force Environmental Model and Data Exchange. Volume 4. Appendix G. Model Review and Index-Air Multimedia and Other Models, Plus Data Bases.

DTIC Science & Technology

1983-07-01

Analysis of trace contaminants project at ORNL. Medium applied to movement of heavy metals through a forested watershed. OAQPS has not reviewed...computer cartography and site design aids; management information systems for facility planning, construction and * operation; and a computer...4 (5) Comprehensive 4 (6) Spills/ Heavy Gas 5 b. Regional 7 c. Reactive Pollutants 7 d. Special Purpose 8 e. Rocket Firing 8 f. Summary of Models by

Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces

NASA Technical Reports Server (NTRS)

Dooling, D.; Finckenor, M. M.

1999-01-01

This report provides guidelines in selecting materials for satellites and space platforms, designed to operate within the Low-Earth orbit environment, which limit the effects of atomic oxygen interactions with spacecraft surfaces. This document should be treated as an introduction rather than a comprehensive guide since analytical and flight technologies continue to evolve, flight experiments are conducted as primary or piggyback opportunities arise, and our understanding of materials interactions and protection methods grows. The reader is urged to consult recent literature and current web sites containing information about research and flight results.

A Team-Based Process for Designing Comprehensive, Integrated, Three-Tiered (CI3T) Models of Prevention: How Does My School-Site Leadership Team Design a CI3T Model?

ERIC Educational Resources Information Center

Lane, Kathleen Lynne; Oakes, Wendy Peia; Jenkins, Abbie; Menzies, Holly Mariah; Kalberg, Jemma Robertson

2014-01-01

Comprehensive, integrated, three-tiered models are context specific and developed by school-site teams according to the core values held by the school community. In this article, the authors provide a step-by-step, team-based process for designing comprehensive, integrated, three-tiered models of prevention that integrate academic, behavioral, and…

ATS-6 - Technical aspects of the Health/Education Telecommunications Experiment

NASA Technical Reports Server (NTRS)

Boor, J. L.; Braunstein, J.; Janky, J. M.; Ogden, D.; Potter, J. G.; Harper, E. L.; Volkmer, E.; Whalen, A. A.; Henderson, E.; Hupe, H. H.

1975-01-01

An overview is given of the HET experiment on ATS-6. The paper is divided into nine parts, including a technical overview, a preliminary evaluation of the HET demonstration, a review of operations at the Denver uplink terminal, a discussion of remote ground terminals, a review of C-band comprehensive terminals and of S-band comprehensive terminals, and parts devoted to general network operations, technical management and effectiveness of the network, and the site equipment operator.

Achieving Vibration Stability of the NSLS-II Hard X-ray Nanoprobe Beamline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simos, N.; Chu, Y. N.; Broadbent, A.

2010-08-30

The Hard X-ray Nanoprobe (HXN) Beamline of National Synchrotron Light Source II (NSLS-lI) requires high levels of stability in order to achieve the desired instrument resolution. To ensure that the design of the endstation helps meet the stringent criteria and that natural and cultural vibration is mitigated both passively and actively, a comprehensive study complimentary to the design process has been undertaken. Vibration sources that have the potential to disrupt sensitive experiments such as wind, traffic and NSLS II operating systems have been studied using state of the art simulations and an array of field data. Further, final stage vibrationmore » isolation principles have been explored in order to be utilized in supporting endstation instruments. This paper presents results of the various study aspects and their influence on the HXN design optimization.« less

Decreasing Physical Inactivity in the Veterans Health Administration Employee Population.

PubMed

Schult, Tamara M; Schmunk, Sandra K; Awosika, Ebi R

2016-12-01

The aim of this study was to describe a comprehensive approach to decrease physical inactivity in the Veterans Health Administration (VHA) employee population. The approach included (1) initiatives to decrease physical inactivity in the workplace; (2) two operational surveys to assess system-wide service provision; and (3) two national employee surveys. From 2010 to 2012, 86 employee fitness centers were completed in VA medical centers. A grants program (2010 to 2015) funded smaller projects designed to decrease physical inactivity in the workplace. Projects involved the provision of equipment to decrease sedentary behaviors, including stability balls, treadmill and sit-to-stand desks, stairwell projects, and funding for on-site fitness classes, bicycle racks, and outdoor par courses and walking paths among others. A comprehensive approach to decrease physical inactivity in VHA employees was successful. Overall, self-reported, age-adjusted physical inactivity in VHA employees decreased from 25.3% in 2010 to 16.1% in 2015.

Chemical Operations Technology Curriculum Development Project. PY95 Final Detailed Report.

ERIC Educational Resources Information Center

Texas State Technical Coll., Marshall.

A model curriculum for an associate of applied science degree in chemical operations technology (COT) was developed at Texas State Technical College in Marshall, Texas. First, a comprehensive analysis of the local and statewide labor market demand for trained personnel in the advanced field of COT was conducted. Next, a comprehensive task analysis…

Exploration on the matching between Optical Comprehensive Design Experiment and Washington Accord

NASA Astrophysics Data System (ADS)

Cao, Yiping; Chen, Wenjing; Zhang, Qican; Liu, Yuankun; Li, Dahai; Zhou, Xinzhi; Wei, Jun

2017-08-01

Common problems faced in optical comprehensive design experiment and going against the Washington Accord are pointed out. For resolving these problems, an instructional and innovative teaching scheme for Optics Comprehensive Design Experiment is proposed. We would like to understand the student that can improve the hands-on practical ability, theory knowledge understanding ability, complex problem solving ability, engineering application ability, cooperative ability after tracking and researching the student who have attended the class about Optical Comprehensive Design Experiment, We found that there are some problems on the course such as the experiment content vague, the student beginning less time, phase separation theory and engineering application, the experiment content lack of selectivity and so on. So we have made some improvements reference to the Washington Accord for the class teaching plan about Optical Comprehensive Design Experiment. This class must relevant to the engineering basic courses, professional foundation course and the major courses, so far as to the future study and work that which can play a role in inheriting and continuity to the students. The Optical Comprehensive Design Experiment teaching program requires students learning this course to have learnt basic courses like analog electronics technique, digital electronic technique, applied optics and computer and other related courses which students are required to comprehensively utilize. This teaching scheme contains six practical complex engineering problems which are respectively optical system design, light energy meter design, illuminometer design, material refractive index measuring system design, light intensity measuring system design and open design. Establishing the optional experiment and open experiment can provide students with a greater choice and enhance the students' creativity, vivid teaching experimental teachers and enriching contents of experiment can make the experiment more interesting, providing students with more opportunities to conduct experiment and improving students' practical ability with long learning time, putting emphasis on student's understanding of complex engineering problems and the cognitive of the process to solve complex engineering problems with actual engineering problems. Applying the scheme in other courses and improving accordingly will be able to ensure the quality of engineering education. Look forward to offering useful reference for the curriculum system construction in colleges and universities.

A fault-tolerant intelligent robotic control system

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Tso, Kam Sing

1993-01-01

This paper describes the concept, design, and features of a fault-tolerant intelligent robotic control system being developed for space and commercial applications that require high dependability. The comprehensive strategy integrates system level hardware/software fault tolerance with task level handling of uncertainties and unexpected events for robotic control. The underlying architecture for system level fault tolerance is the distributed recovery block which protects against application software, system software, hardware, and network failures. Task level fault tolerance provisions are implemented in a knowledge-based system which utilizes advanced automation techniques such as rule-based and model-based reasoning to monitor, diagnose, and recover from unexpected events. The two level design provides tolerance of two or more faults occurring serially at any level of command, control, sensing, or actuation. The potential benefits of such a fault tolerant robotic control system include: (1) a minimized potential for damage to humans, the work site, and the robot itself; (2) continuous operation with a minimum of uncommanded motion in the presence of failures; and (3) more reliable autonomous operation providing increased efficiency in the execution of robotic tasks and decreased demand on human operators for controlling and monitoring the robotic servicing routines.

Guidewire retention following central venous catheterisation: a human factors and safe design investigation.

PubMed

Horberry, Tim; Teng, Yi-Chun; Ward, James; Patil, Vishal; Clarkson, P John

2014-01-01

Central Venous Catheterisation (CVC) has occasionally been associated with cases of retained guidewires in patients after surgery. In theory, this is a completely avoidable complication; however, as with any human procedure, operator error leading to guidewires being occasionally retained cannot be fully eliminated. The work described here investigated the issue in an attempt to better understand it both from an operator and a systems perspective, and to ultimately recommend appropriate safe design solutions that reduce guidewire retention errors. Nine distinct methods were used: observations of the procedure, a literature review, interviewing CVC end-users, task analysis construction, CVC procedural audits, two human reliability assessments, usability heuristics and a comprehensive solution survey with CVC end-users. The three solutions that operators rated most highly, in terms of both practicality and effectiveness, were: making trainees better aware of the potential guidewire complications and strongly emphasising guidewire removal in CVC training, actively checking that the guidewire is present in the waste tray for disposal, and standardising purchase of central line sets so that differences that may affect chances of guidewire loss is minimised. Further work to eliminate/engineer out the possibility of guidewires being retained is proposed.

Conceptual designs of conduction cooled MgB2 magnets for 1.5 and 3.0 T full body MRI systems

NASA Astrophysics Data System (ADS)

Baig, Tanvir; Amin, Abdullah Al; Deissler, Robert J.; Sabri, Laith; Poole, Charles; Brown, Robert W.; Tomsic, Michael; Doll, David; Rindfleisch, Matthew; Peng, Xuan; Mendris, Robert; Akkus, Ozan; Sumption, Michael; Martens, Michael

2017-04-01

Conceptual designs of 1.5 and 3.0 T full-body magnetic resonance imaging (MRI) magnets using conduction cooled MgB2 superconductor are presented. The sizes, locations, and number of turns in the eight coil bundles are determined using optimization methods that minimize the amount of superconducting wire and produce magnetic fields with an inhomogeneity of less than 10 ppm over a 45 cm diameter spherical volume. MgB2 superconducting wire is assessed in terms of the transport, thermal, and mechanical properties for these magnet designs. Careful calculations of the normal zone propagation velocity and minimum quench energies provide support for the necessity of active quench protection instead of passive protection for medium temperature superconductors such as MgB2. A new ‘active’ protection scheme for medium T c based MRI magnets is presented and simulations demonstrate that the magnet can be protected. Recent progress on persistent joints for multifilamentary MgB2 wire is presented. Finite difference calculations of the quench propagation and temperature rise during a quench conclude that active intervention is needed to reduce the temperature rise in the coil bundles and prevent damage to the superconductor. Comprehensive multiphysics and multiscale analytical and finite element analysis of the mechanical stress and strain in the MgB2 wire and epoxy for these designs are presented for the first time. From mechanical and thermal analysis of our designs we conclude there would be no damage to such a magnet during the manufacturing or operating stages, and that the magnet would survive various quench scenarios. This comprehensive set of magnet design considerations and analyses demonstrate the overall viability of 1.5 and 3.0 T MgB2 magnet designs.

Conceptual designs of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems

PubMed Central

Baig, Tanvir; Al Amin, Abdullah; Deissler, Robert J; Sabri, Laith; Poole, Charles; Brown, Robert W; Tomsic, Michael; Doll, David; Rindfleisch, Matthew; Peng, Xuan; Mendris, Robert; Akkus, Ozan; Sumption, Michael; Martens, Michael

2017-01-01

Conceptual designs of 1.5 and 3.0 T full-body magnetic resonance imaging (MRI) magnets using conduction cooled MgB2 superconductor are presented. The sizes, locations, and number of turns in the eight coil bundles are determined using optimization methods that minimize the amount of superconducting wire and produce magnetic fields with an inhomogeneity of less than 10 ppm over a 45 cm diameter spherical volume. MgB2 superconducting wire is assessed in terms of the transport, thermal, and mechanical properties for these magnet designs. Careful calculations of the normal zone propagation velocity and minimum quench energies provide support for the necessity of active quench protection instead of passive protection for medium temperature superconductors such as MgB2. A new ‘active’ protection scheme for medium Tc based MRI magnets is presented and simulations demonstrate that the magnet can be protected. Recent progress on persistent joints for multifilamentary MgB2 wire is presented. Finite difference calculations of the quench propagation and temperature rise during a quench conclude that active intervention is needed to reduce the temperature rise in the coil bundles and prevent damage to the superconductor. Comprehensive multiphysics and multiscale analytical and finite element analysis of the mechanical stress and strain in the MgB2 wire and epoxy for these designs are presented for the first time. From mechanical and thermal analysis of our designs we conclude there would be no damage to such a magnet during the manufacturing or operating stages, and that the magnet would survive various quench scenarios. This comprehensive set of magnet design considerations and analyses demonstrate the overall viability of 1.5 and 3.0 T MgB2 magnet designs. PMID:29170604

Conceptual designs of conduction cooled MgB2 magnets for 1.5 and 3.0T full body MRI systems.

PubMed

Baig, Tanvir; Al Amin, Abdullah; Deissler, Robert J; Sabri, Laith; Poole, Charles; Brown, Robert W; Tomsic, Michael; Doll, David; Rindfleisch, Matthew; Peng, Xuan; Mendris, Robert; Akkus, Ozan; Sumption, Michael; Martens, Michael

2017-04-01

Conceptual designs of 1.5 and 3.0 T full-body magnetic resonance imaging (MRI) magnets using conduction cooled MgB 2 superconductor are presented. The sizes, locations, and number of turns in the eight coil bundles are determined using optimization methods that minimize the amount of superconducting wire and produce magnetic fields with an inhomogeneity of less than 10 ppm over a 45 cm diameter spherical volume. MgB 2 superconducting wire is assessed in terms of the transport, thermal, and mechanical properties for these magnet designs. Careful calculations of the normal zone propagation velocity and minimum quench energies provide support for the necessity of active quench protection instead of passive protection for medium temperature superconductors such as MgB 2 . A new 'active' protection scheme for medium T c based MRI magnets is presented and simulations demonstrate that the magnet can be protected. Recent progress on persistent joints for multifilamentary MgB 2 wire is presented. Finite difference calculations of the quench propagation and temperature rise during a quench conclude that active intervention is needed to reduce the temperature rise in the coil bundles and prevent damage to the superconductor. Comprehensive multiphysics and multiscale analytical and finite element analysis of the mechanical stress and strain in the MgB 2 wire and epoxy for these designs are presented for the first time. From mechanical and thermal analysis of our designs we conclude there would be no damage to such a magnet during the manufacturing or operating stages, and that the magnet would survive various quench scenarios. This comprehensive set of magnet design considerations and analyses demonstrate the overall viability of 1.5 and 3.0 T MgB 2 magnet designs.

SSTO vs TSTO design considerations—an assessment of the overall performance, design considerations, technologies, costs, and sensitivities of SSTO and TSTO designs using modern technologies

NASA Astrophysics Data System (ADS)

Penn, Jay P.

1996-03-01

It is generally believed by those skilled in launch system design that Single-Stage-To-Orbit (SSTO) designs are more technically challenging, more performance sensitive, and yield larger lift-off weights than do Two-Stage-To-Orbit designs (TSTO's) offering similar payload delivery capability. Without additional insight into the other considerations which drive the development, recurring costs, operability, and reliability of a launch fleet, an analyst may easily conclude that the higher performing, less sensitive TSTO designs, thus yield a better solution to achieving low cost payload delivery. This limited insight could justify an argument to eliminate the X-33 SSTO technology/demonstration development effort, and thus proceed directly to less risky TSTO designs. Insight into real world design considerations of launch vehicles makes the choice of SSTO vs TSTO much less clear. The presentation addresses a more comprehensive evaluation of the general class of SSTO and TSTO concepts. These include pure SSTO's, augmented SSTO's, Siamese Twin, and Pure TSTO designs. The assessment considers vehicle performance and scaling relationships which characterize real vehicle designs. The assessment also addresses technology requirements, operations and supportability, cost implications, and sensitivities. Results of the assessment indicate that the trade space between various SSTO and TSTO design approaches is complex and not yet fully understood. The results of the X-33 technology demonstrators, as well as additional parametric analysis is required to better define the relative performance and costs of the various design approaches. The results also indicate that with modern technologies and today's better understanding of vehicle design considerations, the perception that SSTO's are dramatically heavier and more sensitive than TSTO designs is more of a myth, than reality.

Designing the user interface: strategies for effective human-computer interaction

NASA Astrophysics Data System (ADS)

Shneiderman, B.

1998-03-01

In revising this popular book, Ben Shneiderman again provides a complete, current and authoritative introduction to user-interface design. The user interface is the part of every computer system that determines how people control and operate that system. When the interface is well designed, it is comprehensible, predictable, and controllable; users feel competent, satisfied, and responsible for their actions. Shneiderman discusses the principles and practices needed to design such effective interaction. Based on 20 years experience, Shneiderman offers readers practical techniques and guidelines for interface design. He also takes great care to discuss underlying issues and to support conclusions with empirical results. Interface designers, software engineers, and product managers will all find this book an invaluable resource for creating systems that facilitate rapid learning and performance, yield low error rates, and generate high user satisfaction. Coverage includes the human factors of interactive software (with a new discussion of diverse user communities), tested methods to develop and assess interfaces, interaction styles such as direct manipulation for graphical user interfaces, and design considerations such as effective messages, consistent screen design, and appropriate color.

Computerizing an integrated clinical and financial record system in a CMHC: a pilot project.

PubMed

Newkham, J; Bawcom, L

1981-01-01

The authors describe the three-year experience of a mid-sized community mental health center in designing and installing an automated Staff/Management Information System (S/MIS). The purpose of the project, piloted at the heart od Texas Region Mental Health Mental Retardation Center (HOTRMHMR) in Waco, Texas, was to examine the feasibility of a comprehensive data system operating at a local level which would create an effective audit trail for services and reimbursement and serve as a viable mechanism for the transmission of center data to a state system via computer tapes. Included in the discussion are agency philosophy, costs, management attitudes, the design and implementation process, and special features which evolved from the fully integrated system.

A comparison of WEC control strategies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, David G.; Bacelli, Giorgio; Coe, Ryan Geoffrey

2016-04-01

The operation of Wave Energy Converter (WEC) devices can pose many challenging problems to the Water Power Community. A key research question is how to significantly improve the performance of these WEC devices through improving the control system design. This report summarizes an effort to analyze and improve the performance of WEC through the design and implementation of control systems. Controllers were selected to span the WEC control design space with the aim of building a more comprehensive understanding of different controller capabilities and requirements. To design and evaluate these control strategies, a model scale test-bed WEC was designed formore » both numerical and experimental testing (see Section 1.1). Seven control strategies have been developed and applied on a numerical model of the selected WEC. This model is capable of performing at a range of levels, spanning from a fully-linear realization to varying levels of nonlinearity. The details of this model and its ongoing development are described in Section 1.2.« less

Designing Flightdeck Procedures: Literature Resources

NASA Technical Reports Server (NTRS)

Feldman, Jolene; Barshi, Immanuel; Degani, Asaf; Loukopoulou, Loukia; Mauro, Robert

2017-01-01

This technical publication contains the titles, abstracts, summaries, descriptions, and/or annotations of available literature sources on procedure design and development, requirements, and guidance. It is designed to provide users with an easy access to available resources on the topic of procedure design, and with a sense of the contents of these sources. This repository of information is organized into the following publication sources: Research (e.g., journal articles, conference proceedings), Manufacturers' (e.g., operation manuals, newsletters), and Regulatory and/or Government (e.g., advisory circulars, reports). An additional section contains synopses of Accident/Incident Reports involving procedures. This work directly supports a comprehensive memorandum by Barshi, Mauro, Degani, & Loukopoulou (2016) that summarizes the results of a multi-year project, partially funded by the FAA, to develop technical reference materials that support guidance on the process of developing cockpit procedures (see "Designing Flightdeck Procedures" https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20160013263.pdf). An extensive treatment of this topic is presented in a forthcoming book by the same authors.

Iconic Gestures for Robot Avatars, Recognition and Integration with Speech.

PubMed

Bremner, Paul; Leonards, Ute

2016-01-01

Co-verbal gestures are an important part of human communication, improving its efficiency and efficacy for information conveyance. One possible means by which such multi-modal communication might be realized remotely is through the use of a tele-operated humanoid robot avatar. Such avatars have been previously shown to enhance social presence and operator salience. We present a motion tracking based tele-operation system for the NAO robot platform that allows direct transmission of speech and gestures produced by the operator. To assess the capabilities of this system for transmitting multi-modal communication, we have conducted a user study that investigated if robot-produced iconic gestures are comprehensible, and are integrated with speech. Robot performed gesture outcomes were compared directly to those for gestures produced by a human actor, using a within participant experimental design. We show that iconic gestures produced by a tele-operated robot are understood by participants when presented alone, almost as well as when produced by a human. More importantly, we show that gestures are integrated with speech when presented as part of a multi-modal communication equally well for human and robot performances.

Wastewater disposal to landfill-sites: a synergistic solution for centralized management of olive mill wastewater and enhanced production of landfill gas.

PubMed

Diamantis, Vasileios; Erguder, Tuba H; Aivasidis, Alexandros; Verstraete, Willy; Voudrias, Evangelos

2013-10-15

The present paper focuses on a largely unexplored field of landfill-site valorization in combination with the construction and operation of a centralized olive mill wastewater (OMW) treatment facility. The latter consists of a wastewater storage lagoon, a compact anaerobic digester operated all year round and a landfill-based final disposal system. Key elements for process design, such as wastewater pre-treatment, application method and rate, and the potential effects on leachate quantity and quality, are discussed based on a comprehensive literature review. Furthermore, a case-study for eight (8) olive mill enterprises generating 8700 m(3) of wastewater per year, was conceptually designed in order to calculate the capital and operational costs of the facility (transportation, storage, treatment, final disposal). The proposed facility was found to be economically self-sufficient, as long as the transportation costs of the OMW were maintained at ≤4.0 €/m(3). Despite that EU Landfill Directive prohibits wastewater disposal to landfills, controlled application, based on appropriately designed pre-treatment system and specific loading rates, may provide improved landfill stabilization and a sustainable (environmentally and economically) solution for effluents generated by numerous small- and medium-size olive mill enterprises dispersed in the Mediterranean region. Copyright © 2013 Elsevier Ltd. All rights reserved.

Modeling and Optimization of Recycled Water Systems to Augment Urban Groundwater Recharge through Underutilized Stormwater Spreading Basins.

PubMed

Bradshaw, Jonathan L; Luthy, Richard G

2017-10-17

Infrastructure systems that use stormwater and recycled water to augment groundwater recharge through spreading basins represent cost-effective opportunities to diversify urban water supplies. However, technical questions remain about how these types of managed aquifer recharge systems should be designed; furthermore, existing planning tools are insufficient for performing robust design comparisons. Addressing this need, we present a model for identifying the best-case design and operation schedule for systems that deliver recycled water to underutilized stormwater spreading basins. Resulting systems are optimal with respect to life cycle costs and water deliveries. Through a case study of Los Angeles, California, we illustrate how delivering recycled water to spreading basins could be optimally implemented. Results illustrate trade-offs between centralized and decentralized configurations. For example, while a centralized Hyperion system could deliver more recycled water to the Hansen Spreading Grounds, this system incurs approximately twice the conveyance cost of a decentralized Tillman system (mean of 44% vs 22% of unit life cycle costs). Compared to existing methods, our model allows for more comprehensive and precise analyses of cost, water volume, and energy trade-offs among different design scenarios. This model can inform decisions about spreading basin operation policies and the development of new water supplies.

Enhancing Concept Comprehension in a Web-Based Course Using a Framework Integrating the Learning Cycle with Variation Theory

ERIC Educational Resources Information Center

Hsu, Chih-Chao; Wang, Tzone-I

2014-01-01

Concept comprehension is an important foundation for more complex thoughts. To enhance concept comprehension, teachers of traditional classrooms have been using instructional strategies and specific course designs, which have been proven effective. It initiates a hypothesis that integrating instructional strategies in the course designs of an…

The Respective Advantages and Disadvantages of Different Ways of Measuring the Instructional Sensitivity of Reading Comprehension Test Items.

ERIC Educational Resources Information Center

Perkins, Kyle

In this paper four classes of procedures for measuring the instructional sensitivity of reading comprehension test items are reviewed. True experimental designs are not recommended because some of the most important reading comprehension variables do not lend themselves to experimental manipulation. "Ex post facto" factorial designs are…

A comprehensive strategy in the development of a cyclodextrin-modified microemulsion electrokinetic chromatographic method for the assay of diclofenac and its impurities: Mixture-process variable experiments and quality by design.

PubMed

Orlandini, S; Pasquini, B; Caprini, C; Del Bubba, M; Squarcialupi, L; Colotta, V; Furlanetto, S

2016-09-30

A comprehensive strategy involving the use of mixture-process variable (MPV) approach and Quality by Design principles has been applied in the development of a capillary electrophoresis method for the simultaneous determination of the anti-inflammatory drug diclofenac and its five related substances. The selected operative mode consisted in microemulsion electrokinetic chromatography with the addition of methyl-β-cyclodextrin. The critical process parameters included both the mixture components (MCs) of the microemulsion and the process variables (PVs). The MPV approach allowed the simultaneous investigation of the effects of MCs and PVs on the critical resolution between diclofenac and its 2-deschloro-2-bromo analogue and on analysis time. MPV experiments were used both in the screening phase and in the Response Surface Methodology, making it possible to draw MCs and PVs contour plots and to find important interactions between MCs and PVs. Robustness testing was carried out by MPV experiments and validation was performed following International Conference on Harmonisation guidelines. The method was applied to a real sample of diclofenac gastro-resistant tablets. Copyright © 2016 Elsevier B.V. All rights reserved.

A new algorithm for design, operation and cost assessment of struvite (MgNH4PO4) precipitation processes.

PubMed

Birnhack, Liat; Nir, Oded; Telzhenski, Marina; Lahav, Ori

2015-01-01

Deliberate struvite (MgNH4PO4) precipitation from wastewater streams has been the topic of extensive research in the last two decades and is expected to gather worldwide momentum in the near future as a P-reuse technique. A wide range of operational alternatives has been reported for struvite precipitation, including the application of various Mg(II) sources, two pH elevation techniques and several Mg:P ratios and pH values. The choice of each operational parameter within the struvite precipitation process affects process efficiency, the overall cost and also the choice of other operational parameters. Thus, a comprehensive simulation program that takes all these parameters into account is essential for process design. This paper introduces a systematic decision-supporting tool which accepts a wide range of possible operational parameters, including unconventional Mg(II) sources (i.e. seawater and seawater nanofiltration brines). The study is supplied with a free-of-charge computerized tool (http://tx.technion.ac.il/~agrengn/agr/Struvite_Program.zip) which links two computer platforms (Python and PHREEQC) for executing thermodynamic calculations according to predefined kinetic considerations. The model can be (inter alia) used for optimizing the struvite-fluidized bed reactor process operation with respect to P removal efficiency, struvite purity and economic feasibility of the chosen alternative. The paper describes the algorithm and its underlying assumptions, and shows results (i.e. effluent water quality, cost breakdown and P removal efficiency) of several case studies consisting of typical wastewaters treated at various operational conditions.

INTEGRATION OF SYSTEMS ENGINEERING AND PROCESS INTENSIFICATION IN THE DESIGN OF PROCESSES FOR UTILIZING BIOBASED GLYCEROL

EPA Science Inventory

The expected results include an integrated process and mechanical design including a fabrication plan for the glycerol dehydration reactor, comprehensive heat and material balance, environmental impact assessment and comprehensive safety review. The resulting process design w...

Regulation of the Dynamic Live Load Factor for Calculation of Bridge Structures on High-Speed Railway Mainlines

NASA Astrophysics Data System (ADS)

Dyachenko, Leonid K.; Benin, Andrey V.

2017-06-01

When the high-speed railway traffic is being organized, it becomes necessary to elaborate bridge design standards for high-speed railways (HSR). Methodology of studying the issues of HSR bridge design is based on the comprehensive analysis of domestic research as well as international experience in design, construction and operation of high-speed railways. Serious requirements are imposed on the HSR artificial structures, which raise a number of scientific tasks associated mainly with the issues of the dynamic interaction of the rolling stock and the bridge elements. To ensure safety of traffic and reliability of bridges during the whole period of operation one needs to resolve the dynamic problems of various types of high-speed trains moving along the structures. The article analyses dependences of the magnitude of inertial response on the external stress parameters and proposes a simplified method of determination of the dynamic live load factor caused by the passage of high-speed trains. The usefulness of the given research arises from the reduction of complexity of the complicated dynamic calculations needed to describe a high-speed train travelling along the artificial structures.

Restorative dentistry productivity of senior students engaged in comprehensive care.

PubMed

Blalock, John S; Callan, Richard S; Lazarchik, David A; Frank Caughman, W; Looney, Stephen

2012-12-01

In dental education, various clinical delivery models are used to educate dental students. The quantitative and qualitative measures used to assess the outcomes of these models are varied. Georgia Health Sciences University College of Dental Medicine has adopted a version of a general dentistry comprehensive care dental education hybrid model. Outcome assessments were developed to evaluate the effectiveness of this delivery model. The aim of this study was to compare the number of restorative procedures performed by senior dental students under a discipline-based model versus senior student productivity engaged in comprehensive care as part of a hybrid model. The rate of senior students' productivity in performing various restorative procedures was tracked over four years, and a comparison was made. In the first two years, the seniors operated in a discipline-based model, while in the last two years the seniors operated in a comprehensive care hybrid model. The results showed that there was a significant increase in productivity by the students in terms of direct and indirect restorations. This increase in productivity may indicate that the comprehensive care model may be a more productive model, thereby enhancing clinical experiences for the students, improving operating efficiency for the schools, and ultimately increasing clinical income.

Mechatronic description of a laser autoguided vehicle for greenhouse operations.

PubMed

Sánchez-Hermosilla, Julián; González, Ramón; Rodríguez, Francisco; Donaire, Julián G

2013-01-08

This paper presents a novel approach for guiding mobile robots inside greenhouses demonstrated by promising preliminary physical experiments. It represents a comprehensive attempt to use the successful principles of AGVs (auto-guided vehicles) inside greenhouses, but avoiding the necessity of modifying the crop layout, and avoiding having to bury metallic pipes in the greenhouse floor. The designed vehicle can operate different tools, e.g., a spray system for applying plant-protection product, a lifting platform to reach the top part of the plants to perform pruning and harvesting tasks, and a trailer to transport fruits, plants, and crop waste. Regarding autonomous navigation, it follows the idea of AGVs, but now laser emitters are used to mark the desired route. The vehicle development is analyzed from a mechatronic standpoint (mechanics, electronics, and autonomous control).

Biomedical Applications of Untethered Mobile Milli/Microrobots

PubMed Central

Sitti, Metin; Ceylan, Hakan; Hu, Wenqi; Giltinan, Joshua; Turan, Mehmet; Yim, Sehyuk; Diller, Eric

2016-01-01

Untethered robots miniaturized to the length scale of millimeter and below attract growing attention for the prospect of transforming many aspects of health care and bioengineering. As the robot size goes down to the order of a single cell, previously inaccessible body sites would become available for high-resolution in situ and in vivo manipulations. This unprecedented direct access would enable an extensive range of minimally invasive medical operations. Here, we provide a comprehensive review of the current advances in biome dical untethered mobile milli/microrobots. We put a special emphasis on the potential impacts of biomedical microrobots in the near future. Finally, we discuss the existing challenges and emerging concepts associated with designing such a miniaturized robot for operation inside a biological environment for biomedical applications. PMID:27746484

KSC History Project

NASA Technical Reports Server (NTRS)

Moore, Patrick K.

2003-01-01

The 2003 NASA/ASEE KSC History Project focused on a series of six history initiatives designed to acquire, preserve, and interpret the history of Kennedy Space Center. These six projects included the completion of Voices From the Cape, historical work co-authored with NASA historian Roger Launius, the completion of a series of oral histories with key KSC personnel, expansion of monograph on Public Affairs into two comprehensive pieces on KSC press operations and KSC visitor operations, the expansion of KSC Historical Concept Maps (Cmap) for history knowledge preservation, the expansion of the KSC oral history program through the administration of an oral history workshop for KSC-based practitioners, and the continued collaborative relationships between Kennedy Space Center, the University of West Florida, the University of Central Florida and other institutions including the University of Louisiana at Lafayette.

Automated power management and control

NASA Technical Reports Server (NTRS)

Dolce, James L.

1991-01-01

A comprehensive automation design is being developed for Space Station Freedom's electric power system. A joint effort between NASA's Office of Aeronautics and Exploration Technology and NASA's Office of Space Station Freedom, it strives to increase station productivity by applying expert systems and conventional algorithms to automate power system operation. The initial station operation will use ground-based dispatches to perform the necessary command and control tasks. These tasks constitute planning and decision-making activities that strive to eliminate unplanned outages. We perceive an opportunity to help these dispatchers make fast and consistent on-line decisions by automating three key tasks: failure detection and diagnosis, resource scheduling, and security analysis. Expert systems will be used for the diagnostics and for the security analysis; conventional algorithms will be used for the resource scheduling.

The effect of Gestalt laws of perceptual organization on the comprehension of three-variable bar and line graphs.

PubMed

Ali, Nadia; Peebles, David

2013-02-01

We report three experiments investigating the ability of undergraduate college students to comprehend 2 x 2 "interaction" graphs from two-way factorial research designs. Factorial research designs are an invaluable research tool widely used in all branches of the natural and social sciences, and the teaching of such designs lies at the core of many college curricula. Such data can be represented in bar or line graph form. Previous studies have shown, however, that people interpret these two graphical forms differently. In Experiment 1, participants were required to interpret interaction data in either bar or line graphs while thinking aloud. Verbal protocol analysis revealed that line graph users were significantly more likely to misinterpret the data or fail to interpret the graph altogether. The patterns of errors line graph users made were interpreted as arising from the operation of Gestalt principles of perceptual organization, and this interpretation was used to develop two modified versions of the line graph, which were then tested in two further experiments. One of the modifications resulted in a significant improvement in performance. Results of the three experiments support the proposed explanation and demonstrate the effects (both positive and negative) of Gestalt principles of perceptual organization on graph comprehension. We propose that our new design provides a more balanced representation of the data than the standard line graph for nonexpert users to comprehend the full range of relationships in two-way factorial research designs and may therefore be considered a more appropriate representation for use in educational and other nonexpert contexts.

Aural Comprehension in the Second Language Classroom.

ERIC Educational Resources Information Center

Moss, Wayne

1983-01-01

The importance of incorporating aural comprehension activities in the second language classroom is discussed. In addition, both the theoretical models upon which the listening comprehension research is based and the operational definitions employed by the researchers are examined. It is suggested that research demonstrates the value of emphasizing…

The neural correlates of strategic reading comprehension: cognitive control and discourse comprehension.

PubMed

Moss, Jarrod; Schunn, Christian D; Schneider, Walter; McNamara, Danielle S; Vanlehn, Kurt

2011-09-15

Neuroimaging studies of text comprehension conducted thus far have shed little light on the brain mechanisms underlying strategic learning from text. Thus, the present study was designed to answer the question of what brain areas are active during performance of complex reading strategies. Reading comprehension strategies are designed to improve a reader's comprehension of a text. For example, self-explanation is a complex reading strategy that enhances existing comprehension processes. It was hypothesized that reading strategies would involve areas of the brain that are normally involved in reading comprehension along with areas that are involved in strategic control processes because the readers are intentionally using a complex reading strategy. Subjects were asked to reread, paraphrase, and self-explain three different texts in a block design fMRI study. Activation was found in both executive control and comprehension areas, and furthermore, learning from text was associated with activation in the anterior prefrontal cortex (aPFC). The authors speculate that the aPFC may play a role in coordinating the internal and external modes of thought that are necessary for integrating new knowledge from texts with prior knowledge. Copyright © 2011 Elsevier Inc. All rights reserved.

Surgery scheduling optimization considering real life constraints and comprehensive operation cost of operating room.

PubMed

Xiang, Wei; Li, Chong

2015-01-01

Operating Room (OR) is the core sector in hospital expenditure, the operation management of which involves a complete three-stage surgery flow, multiple resources, prioritization of the various surgeries, and several real-life OR constraints. As such reasonable surgery scheduling is crucial to OR management. To optimize OR management and reduce operation cost, a short-term surgery scheduling problem is proposed and defined based on the survey of the OR operation in a typical hospital in China. The comprehensive operation cost is clearly defined considering both under-utilization and overutilization. A nested Ant Colony Optimization (nested-ACO) incorporated with several real-life OR constraints is proposed to solve such a combinatorial optimization problem. The 10-day manual surgery schedules from a hospital in China are compared with the optimized schedules solved by the nested-ACO. Comparison results show the advantage using the nested-ACO in several measurements: OR-related time, nurse-related time, variation in resources' working time, and the end time. The nested-ACO considering real-life operation constraints such as the difference between first and following case, surgeries priority, and fixed nurses in pre/post-operative stage is proposed to solve the surgery scheduling optimization problem. The results clearly show the benefit of using the nested-ACO in enhancing the OR management efficiency and minimizing the comprehensive overall operation cost.

Multidisciplinary Conceptual Design for Reduced-Emission Rotorcraft

NASA Technical Reports Server (NTRS)

Silva, Christopher; Johnson, Wayne; Solis, Eduardo

2018-01-01

Python-based wrappers for OpenMDAO are used to integrate disparate software for practical conceptual design of rotorcraft. The suite of tools which are connected thus far include aircraft sizing, comprehensive analysis, and parametric geometry. The tools are exercised to design aircraft with aggressive goals for emission reductions relative to fielded state-of-the-art rotorcraft. Several advanced reduced-emission rotorcraft are designed and analyzed, demonstrating the flexibility of the tools to consider a wide variety of potentially transformative vertical flight vehicles. To explore scale effects, aircraft have been sized for 5, 24, or 76 passengers in their design missions. Aircraft types evaluated include tiltrotor, single-main-rotor, coaxial, and side-by-side helicopters. Energy and drive systems modeled include Lithium-ion battery, hydrogen fuel cell, turboelectric hybrid, and turboshaft drive systems. Observations include the complex nature of the trade space for this simple problem, with many potential aircraft design and operational solutions for achieving significant emission reductions. Also interesting is that achieving greatly reduced emissions may not require exotic component technologies, but may be achieved with a dedicated design objective of reducing emissions.

The design of a light aircraft automated dropsonde launcher

NASA Astrophysics Data System (ADS)

Pasken, Gregory R.

The use of the National Center for Atmospheric Research's dropsonde system is currently limited to large NASA, NSF and NOAA operated research aircraft, which are expensive to fly and are over-subscribed. Designing a new dropsonde system for a smaller, less expensive to operate light aircraft will make the dropsonde system available to a much wider research community. To test this concept, a dropsonde launch system designed to fit in the cargo door of a twin engine Piper Seminole is developed and tested. Although the launch system for the light aircraft dropsonde launcher has gone through many designs, a prototype is built and tested from the final design using Tetra for the computation fluid dynamics and stress testing, as Tetra has material properties for solids as well as fluids. The design is further tested in the wind tunnel. These tests show that the new design is a viable alternative for light aircraft, thus allowing dropsondes to be more widely used. The results of the ABAQUS, SC Tetra simulations, and the wind tunnel results of the final design are covered and discussed. The settings used for the ABAQUS and SC Tetra simulations are described in detail. ABAQUS simulations are conducted to perform stress testing and SC Tetra is used for CFD simulations. The SC Tetra simulations provide a more comprehensive picture of the design, as SC Tetra is able to perform the stress testing, as well as pressure testing, allowing for more accurate results. The limitations of ABAQUS simulations require numerous assumptions for loading that may or may not be realistic.

Improvements of the magnetic field design for SPIDER and MITICA negative ion beam sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chitarin, G., E-mail: chitarin@igi.cnr.it; University of Padova, Dept. of Management and Engineering, Strad. S. Nicola 3, 36100 Vicenza; Agostinetti, P.

2015-04-08

The design of the magnetic field configuration in the SPIDER and MITICA negative ion beam sources has evolved considerably during the past four years. This evolution was driven by three factors: 1) the experimental results of the large RF-driven ion sources at IPP, which have provided valuable indications on the optimal magnetic configurations for reliable RF plasma source operation and for large negative ion current extraction, 2) the comprehensive beam optics and heat load simulations, which showed that the magnetic field configuration in the accelerator is crucial for keeping the heat load due to electrons on the accelerator grids withinmore » tolerable limits, without compromising the optics of the negative ion beam in the foreseen operating scenarios, 3) the progress of the detailed mechanical design of the accelerator, which stimulated the evaluation of different solutions for the correction of beamlet deflections of various origin and for beamlet aiming. On this basis, new requirements and solution concepts for the magnetic field configuration in the SPIDER and MITICA beam sources have been progressively introduced and updated until the design converged. The paper presents how these concepts have been integrated into a final design solution based on a horizontal “long-range” field (few mT) in combination with a “local” vertical field of some tens of mT on the acceleration grids.« less

The course of language functions after temporal lobe epilepsy surgery: a prospective study.

PubMed

Giovagnoli, A R; Parente, A; Didato, G; Manfredi, V; Deleo, F; Tringali, G; Villani, F

2016-12-01

Anterior temporal lobectomy (ATL) within the language-dominant hemisphere can impair naming. This prospective study examined the pre-operative to post-operative course of different language components, clarifying which changes are relevant within the short-term and long-term outcome of language. Patients with drug-resistant temporal lobe epilepsy (TLE) were evaluated using the Token, Boston Naming and Word Fluency tests assessing sentence comprehension and word-finding on visual, semantic or phonemic cues. A total of 106 patients were evaluated before and 6 months, 1 and 2 years after ATL; 60 patients were also evaluated after 5 years and 38 controls were assessed at baseline. Seizure outcome was comparable between the left and right TLE patients. Before surgery, naming and word fluency were impaired in the left and right TLE patients, whereas sentence comprehension was normal. After left or right ATL, word fluency progressively improved, naming showed early worsening and late improvement after left ATL and progressive improvement after right ATL, and sentence comprehension did not change. At the 5-year follow-up, naming improvement was clinically significant in 31% and 71% of the left and right TLE patients, respectively. Pre-operative naming, ATL laterality, schooling, and post-operative seizure frequency and number of antiepileptic drugs predicted post-operative naming. Pre-operative word fluency and schooling predicted post-operative word fluency. Left or right TLE can impair word-finding but not sentence comprehension. After ATL, word-finding may improve for a long time, depending on TLE laterality, seizure control and mental reserve. These findings may clarify prognosis prior to treatment. © 2016 EAN.

Memory Operations that Support Language Comprehension: Evidence from Verb-Phrase Ellipsis

ERIC Educational Resources Information Center

Martin, Andrea E.; McElree, Brian

2009-01-01

Comprehension of verb-phrase ellipsis (VPE) requires reevaluation of recently processed constituents, which often necessitates retrieval of information about the elided constituent from memory. A. E. Martin and B. McElree (2008) argued that representations formed during comprehension are content addressable and that VPE antecedents are retrieved…

Using Performance Feedback of Reciprocal Teaching Strategies to Increase Reading Comprehension Srategy Use with Seventh Grade Students with Comprehension Difficulties

ERIC Educational Resources Information Center

Burns, Matthew K.; Maki, Kathrin E.; Karich, Abbey C.; Coolong-Chaffin, Melissa

2017-01-01

The current study used a multiple-baseline design to examine the effect of providing performance feedback on comprehension strategy use and reading comprehension. The participants were four seventh grade students with comprehension difficulties. The students were taught the reciprocal teaching comprehension strategies of generating questions,…

Increasing Student Interest and Comprehension of Production Planning and Control and Operations Performance Measurement Concepts Using a Production Line Game

ERIC Educational Resources Information Center

Cox, James F., III; Walker, Edward D., II

2005-01-01

Production planning and control (PPC) systems and operations performance measures are topics that students generally find both boring and difficult to understand. In the article, the authors present a production line game that they have found to be an effective tool to increase student interest in the topics as well as student comprehension. The…

Extravehicular activities limitations study. Volume 2: Establishment of physiological and performance criteria for EVA gloves

NASA Technical Reports Server (NTRS)

Ohara, John M.; Briganti, Michael; Cleland, John; Winfield, Dan

1988-01-01

One of the major probelms faced in Extravehicular Activity (EVA) glove development has been the absence of concise and reliable methods to measure the effects of EVA gloves on human hand capabilities. This report describes the development of a standardized set of tests designed to assess EVA-gloved hand capabilities in six measurement domains: Range of Motion, Strength, Tactile Perception, Dexterity, Fatigue, and Comfort. Based on an assessment of general human hand functioning and EVA task requirements several tests within each measurement domain were developed to provide a comprehensive evaluation. All tests were designed to be conducted in a glove box with the bare hand as a baseline and the EVA glove at operating pressure. A test program was conducted to evaluate the tests using a representative EVA glove. Eleven test subjects participated in a repeated-measures design. The report presents the results of the tests in each capability domain.

Mobile Delivery of Treatment for Alcohol Use Disorders

PubMed Central

Quanbeck, Andrew; Chih, Ming-Yuan; Isham, Andrew; Johnson, Roberta; Gustafson, David

2014-01-01

Several systems for treating alcohol-use disorders (AUDs) exist that operate on mobile phones. These systems are categorized into four groups: text-messaging monitoring and reminder systems, text-messaging intervention systems, comprehensive recovery management systems, and game-based systems. Text-messaging monitoring and reminder systems deliver reminders and prompt reporting of alcohol consumption, enabling continuous monitoring of alcohol use. Text-messaging intervention systems additionally deliver text messages designed to promote abstinence and recovery. Comprehensive recovery management systems use the capabilities of smart-phones to provide a variety of tools and services that can be tailored to individuals, including in-the-moment assessments and access to peer discussion groups. Game-based systems engage the user using video games. Although many commercial applications for treatment of AUDs exist, few (if any) have empirical evidence of effectiveness. The available evidence suggests that although texting-based applications may have beneficial effects, they are probably insufficient as interventions for AUDs. Comprehensive recovery management systems have the strongest theoretical base and have yielded the strongest and longest-lasting effects, but challenges remain, including cost, understanding which features account for effects, and keeping up with technological advances. PMID:26259005

Comprehension and retrieval of failure cases in airborne observatories

NASA Technical Reports Server (NTRS)

Alvarado, Sergio J.; Mock, Kenrick J.

1995-01-01

This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.

Comprehension and retrieval of failure cases in airborne observatories

NASA Astrophysics Data System (ADS)

Alvarado, Sergio J.; Mock, Kenrick J.

1995-05-01

This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.

Towards operating direct methanol fuel cells with highly concentrated fuel

NASA Astrophysics Data System (ADS)

Zhao, T. S.; Yang, W. W.; Chen, R.; Wu, Q. X.

A significant advantage of direct methanol fuel cells (DMFCs) is the high specific energy of the liquid fuel, making it particularly suitable for portable and mobile applications. Nevertheless, conventional DMFCs have to be operated with excessively diluted methanol solutions to limit methanol crossover and the detrimental consequences. Operation with diluted methanol solutions significantly reduces the specific energy of the power pack and thereby prevents it from competing with advanced batteries. In view of this fact, there exists a need to improve conventional DMFC system designs, including membrane electrode assemblies and the subsystems for supplying/removing reactants/products, so that both the cell performance and the specific energy can be simultaneously maximized. This article provides a comprehensive review of past efforts on the optimization of DMFC systems that operate with concentrated methanol. Based on the discussion of the key issues associated with transport of the reactants/products, the strategies to manage the supply/removal of the reactants/products in DMFC operating with highly concentrated methanol are identified. With these strategies, the possible approaches to achieving the goal of concentrated fuel operation are then proposed. Past efforts in the management of the reactants/products for implementing each of the approaches are also summarized and reviewed.

Development of E-Learning Materials for Machining Safety Education

NASA Astrophysics Data System (ADS)

Nakazawa, Tsuyoshi; Mita, Sumiyoshi; Matsubara, Masaaki; Takashima, Takeo; Tanaka, Koichi; Izawa, Satoru; Kawamura, Takashi

We developed two e-learning materials for Manufacturing Practice safety education: movie learning materials and hazard-detection learning materials. Using these video and sound media, students can learn how to operate machines safely with movie learning materials, which raise the effectiveness of preparation and review for manufacturing practice. Using these materials, students can realize safety operation well. Students can apply knowledge learned in lectures to the detection of hazards and use study methods for hazard detection during machine operation using the hazard-detection learning materials. Particularly, the hazard-detection learning materials raise students‧ safety consciousness and increase students‧ comprehension of knowledge from lectures and comprehension of operations during Manufacturing Practice.

Rosetta CONSERT operations and data analysis preparation: simulation software tools.

NASA Astrophysics Data System (ADS)

Rogez, Yves; Hérique, Alain; Cardiet, Maël; Zine, Sonia; Westphal, Mathieu; Micallef, Mickael; Berquin, Yann; Kofman, Wlodek

2014-05-01

The CONSERT experiment onboard Rosetta and Philae will perform the tomography of the 67P/CG comet nucleus by measuring radio waves transmission from the Rosetta S/C to the Philae Lander. The accurate analysis of travel time measurements will deliver unique knowledge of the nucleus interior dielectric properties. The challenging complexity of CONSERT operations requirements, combining both Rosetta and Philae, allows only a few set of opportunities to acquire data. Thus, we need a fine analysis of the impact of Rosetta trajectory, Philae position and comet shape on CONSERT measurements, in order to take optimal decisions in a short time. The integration of simulation results and mission parameters provides synthetic information to evaluate performances and risks for each opportunity. The preparation of CONSERT measurements before space operations is a key to achieve the best science return of the experiment. In addition, during Rosetta space operations, these software tools will allow a "real-time" first analysis of the latest measurements to improve the next acquisition sequences. The software tools themselves are built around a 3D electromagnetic radio wave simulation, taking into account the signal polarization. It is based on ray-tracing algorithms specifically designed for quick orbit analysis and radar signal generation. This allows computation on big domains relatively to the wavelength. The extensive use of 3D visualization tools provides comprehensive and synthetic views of the results. The software suite is designed to be extended, after Rosetta operations, to the full 3D measurement data analysis using inversion methods.

A Framework for Enterprise Operating Systems Based on Zachman Framework

NASA Astrophysics Data System (ADS)

Ostadzadeh, S. Shervin; Rahmani, Amir Masoud

Nowadays, the Operating System (OS) isn't only the software that runs your computer. In the typical information-driven organization, the operating system is part of a much larger platform for applications and data that extends across the LAN, WAN and Internet. An OS cannot be an island unto itself; it must work with the rest of the enterprise. Enterprise wide applications require an Enterprise Operating System (EOS). Enterprise operating systems used in an enterprise have brought about an inevitable tendency to lunge towards organizing their information activities in a comprehensive way. In this respect, Enterprise Architecture (EA) has proven to be the leading option for development and maintenance of enterprise operating systems. EA clearly provides a thorough outline of the whole information system comprising an enterprise. To establish such an outline, a logical framework needs to be laid upon the entire information system. Zachman Framework (ZF) has been widely accepted as a standard scheme for identifying and organizing descriptive representations that have prominent roles in enterprise-wide system development. In this paper, we propose a framework based on ZF for enterprise operating systems. The presented framework helps developers to design and justify completely integrated business, IT systems, and operating systems which results in improved project success rate.

A practice course to cultivate students' comprehensive ability of photoelectricity

NASA Astrophysics Data System (ADS)

Lv, Yong; Liu, Yang; Niu, Chunhui; Liu, Lishuang

2017-08-01

After the studying of many theoretical courses, it's important and urgent for the students from specialty of optoelectronic information science and engineering to cultivate their comprehensive ability of photoelectricity. We set up a comprehensive practice course named "Integrated Design of Optoelectronic Information System" (IDOIS) for the purpose that students can integrate their knowledge of optics, electronics and computer programming to design, install and debug an optoelectronic system with independent functions. Eight years of practice shows that this practice course can train students' ability of analysis, design/development and debugging of photoelectric system, improve their ability in document retrieval, design proposal and summary report writing, teamwork, innovation consciousness and skill.

CFD-aided modelling of activated sludge systems - A critical review.

PubMed

Karpinska, Anna M; Bridgeman, John

2016-01-01

Nowadays, one of the major challenges in the wastewater sector is the successful design and reliable operation of treatment processes, which guarantee high treatment efficiencies to comply with effluent quality criteria, while keeping the investment and operating cost as low as possible. Although conceptual design and process control of activated sludge plants are key to ensuring these goals, they are still based on general empirical guidelines and operators' experience, dominated often by rule of thumb. This review paper discusses the rationale behind the use of Computational Fluid Dynamics (CFD) to model aeration, facilitating enhancement of treatment efficiency and reduction of energy input. Several single- and multiphase approaches commonly used in CFD studies of aeration tank operation, are comprehensively described, whilst the shortcomings of the modelling assumptions imposed to evaluate mixing and mass transfer in AS tanks are identified and discussed. Examples and methods of coupling of CFD data with biokinetics, accounting for the actual flow field and its impact on the oxygen mass transfer and yield of the biological processes occurring in the aeration tanks, are also critically discussed. Finally, modelling issues, which remain unaddressed, (e.g. coupling of the AS tank with secondary clarifier and the use of population balance models to simulate bubbly flow or flocculation of the activated sludge), are also identified and discussed. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

An integrated assessment of location-dependent scaling for microalgae biofuel production facilities

DOE PAGES

Coleman, André M.; Abodeely, Jared M.; Skaggs, Richard L.; ...

2014-06-19

Successful development of a large-scale microalgae-based biofuels industry requires comprehensive analysis and understanding of the feedstock supply chain—from facility siting and design through processing and upgrading of the feedstock to a fuel product. The evolution from pilot-scale production facilities to energy-scale operations presents many multi-disciplinary challenges, including a sustainable supply of water and nutrients, operational and infrastructure logistics, and economic competitiveness with petroleum-based fuels. These challenges are partially addressed by applying the Integrated Assessment Framework (IAF) – an integrated multi-scale modeling, analysis, and data management suite – to address key issues in developing and operating an open-pond microalgae production facility.more » This is done by analyzing how variability and uncertainty over space and through time affect feedstock production rates, and determining the site-specific “optimum” facility scale to minimize capital and operational expenses. This approach explicitly and systematically assesses the interdependence of biofuel production potential, associated resource requirements, and production system design trade-offs. To provide a baseline analysis, the IAF was applied in this paper to a set of sites in the southeastern U.S. with the potential to cumulatively produce 5 billion gallons per year. Finally, the results indicate costs can be reduced by scaling downstream processing capabilities to fit site-specific growing conditions, available and economically viable resources, and specific microalgal strains.« less

Centrifugal microfluidic platforms: advanced unit operations and applications.

PubMed

Strohmeier, O; Keller, M; Schwemmer, F; Zehnle, S; Mark, D; von Stetten, F; Zengerle, R; Paust, N

2015-10-07

Centrifugal microfluidics has evolved into a mature technology. Several major diagnostic companies either have products on the market or are currently evaluating centrifugal microfluidics for product development. The fields of application are widespread and include clinical chemistry, immunodiagnostics and protein analysis, cell handling, molecular diagnostics, as well as food, water, and soil analysis. Nevertheless, new fluidic functions and applications that expand the possibilities of centrifugal microfluidics are being introduced at a high pace. In this review, we first present an up-to-date comprehensive overview of centrifugal microfluidic unit operations. Then, we introduce the term "process chain" to review how these unit operations can be combined for the automation of laboratory workflows. Such aggregation of basic functionalities enables efficient fluidic design at a higher level of integration. Furthermore, we analyze how novel, ground-breaking unit operations may foster the integration of more complex applications. Among these are the storage of pneumatic energy to realize complex switching sequences or to pump liquids radially inward, as well as the complete pre-storage and release of reagents. In this context, centrifugal microfluidics provides major advantages over other microfluidic actuation principles: the pulse-free inertial liquid propulsion provided by centrifugal microfluidics allows for closed fluidic systems that are free of any interfaces to external pumps. Processed volumes are easily scalable from nanoliters to milliliters. Volume forces can be adjusted by rotation and thus, even for very small volumes, surface forces may easily be overcome in the centrifugal gravity field which enables the efficient separation of nanoliter volumes from channels, chambers or sensor matrixes as well as the removal of any disturbing bubbles. In summary, centrifugal microfluidics takes advantage of a comprehensive set of fluidic unit operations such as liquid transport, metering, mixing and valving. The available unit operations cover the entire range of automated liquid handling requirements and enable efficient miniaturization, parallelization, and integration of assays.

Examination of the Relation between TEOG Score of Turkish Revolution History and Kemalism Course and Reading Comprehension Skill (An Example of Explanatory Sequential Mixed Design)

ERIC Educational Resources Information Center

Yuvaci, Ibrahim; Demir, Selçuk Besir

2016-01-01

This paper is aimed to determine the relation between reading comprehension skill and TEOG success. In this research, a mixed research method, sequential explanatory mixed design, is utilized to examine the relation between reading comprehension skills and TEOG success of 8th grade students throughly. In explanatory sequential mixed design…

Purdue University National Biomedical Tracer Facility: Project definition phase. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, M.A.

The proposed National Biomedical Tracer Facility (NBTF) will house a high-current accelerator dedicated to production of short-lived radionuclides for biomedical and scientific research. The NBTF will play a vital role in repairing and maintaining the United States` research infrastructure for generation of essential accelerator-based radioisotopes. If properly designed and managed, the NBTF should also achieve international recognition as a Center-of-Excellence for research on radioisotope production methods and for associated education and training. The current report documents the results of a DOE-funded NBTF Project Definition Phase study carried out to better define the technical feasibility and projected costs of establishing andmore » operating the NBTF. This report provides an overview of recommended Facility Design and Specifications, including Accelerator Design, Building Design, and the associated Construction Cost Estimates and Schedule. It is recommended that the NBTF be established as an integrated, comprehensive facility for meeting the diverse production, research, and educational missions set forth in previous documents. Based on an analysis of the projected production demands that will be placed on the NBTF, it appears that a 70 MeV, 1 mA, negative ion cyclotron will offer a good balance between production capabilities and the costs of accelerator purchase and operation. A preliminary architectural plan is presented for a facility designed specifically to fulfill the functions of the NBTF in a cost-effective manner. This report also presents a detailed analysis of the Required Federal State, and Local Permits that may be needed to establish the NBTF, along with schedules and cost estimates for obtaining these permits. The Handling, Storage, and Disposal of Radioactive Waste will pose some significant challenges in the operation of the NBTF, but at this stage of planning the associated problems do not appear to be prohibitive.« less

Comprehensive assessment of the L-lysine production process from fermentation of sugarcane molasses.

PubMed

Anaya-Reza, Omar; Lopez-Arenas, Teresa

2017-07-01

L-Lysine is an essential amino acid that can be produced by chemical processes from fossil raw materials, as well as by microbial fermentation, the latter being a more efficient and environmentally friendly procedure. In this work, the production process of L-lysine-HCl is studied using a systematic approach based on modeling and simulation, which supports decision making in the early stage of process design. The study considers two analysis stages: first, the dynamic analysis of the fermentation reactor, where the conversion of sugars from sugarcane molasses to L-lysine with a strain of Corynebacterium glutamicum is carried out. In this stage, the operation mode (either batch or fed batch) and operating conditions of the fermentation reactor are defined to reach the maximum technical criteria. Afterwards, the second analysis stage relates to the industrial production process of L-lysine-HCl, where the fermentation reactor, upstream processing, and downstream processing are included. In this stage, the influence of key parameters on the overall process performance is scrutinized through the evaluation of several technical, economic, and environmental criteria, to determine a profitable and sustainable design of the L-lysine production process. The main results show how the operating conditions, process design, and selection of evaluation criteria can influence in the conceptual design. The best plant design shows maximum product yield (0.31 g L-lysine/g glucose) and productivity (1.99 g/L/h), achieving 26.5% return on investment (ROI) with a payback period (PBP) of 3.8 years, decreasing water and energy consumption, and with a low potential environmental impact (PEI) index.

Design strategies for the International Space University's variable gravity research facility

NASA Technical Reports Server (NTRS)

Bailey, Sheila G.; Chiaramonte, Francis P.; Davidian, Kenneth J.

1990-01-01

A variable gravity research facility named 'Newton' was designed by 58 students from 13 countries at the International Space University's 1989 summer session at the Universite Louis Pasteur, Strasbourge, France. The project was comprehensive in scope, including a political and legal foundation for international cooperation, development and financing; technical, science and engineering issues; architectural design; plausible schedules; and operations, crew issues and maintenance. Since log-term exposure to zero gravity is known to be harmful to the human body, the main goal was to design a unique variable gravity research facility which would find a practical solution to this problem, permitting a manned mission to Mars. The facility would not duplicate other space-based facilities and would provide the flexibility for examining a number of gravity levels, including lunar and Martian gravities. Major design alternatives included a truss versus a tether based system which also involved the question of docking while spinning or despinning to dock. These design issues are described. The relative advantages or disadvantages are discussed, including comments on the necessary research and technology development required for each.

Design Evolution and Performance Characterization of the GTX Air-Breathing Launch Vehicle Inlet

NASA Technical Reports Server (NTRS)

DeBonis, J. R.; Steffen, C. J., Jr.; Rice, T.; Trefny, C. J.

2002-01-01

The design and analysis of a second version of the inlet for the GTX rocket-based combine-cycle launch vehicle is discussed. The previous design did not achieve its predicted performance levels due to excessive turning of low-momentum comer flows and local over-contraction due to asymmetric end-walls. This design attempts to remove these problems by reducing the spike half-angle to 10- from 12-degrees and by implementing true plane of symmetry end-walls. Axisymmetric Reynolds-Averaged Navier-Stokes simulations using both perfect gas and real gas, finite rate chemistry, assumptions were performed to aid in the design process and to create a comprehensive database of inlet performance. The inlet design, which operates over the entire air-breathing Mach number range from 0 to 12, and the performance database are presented. The performance database, for use in cycle analysis, includes predictions of mass capture, pressure recovery, throat Mach number, drag force, and heat load, for the entire Mach range. Results of the computations are compared with experimental data to validate the performance database.

Conceptual design study of a nuclear Brayton turboalternator-compressor

NASA Technical Reports Server (NTRS)

1971-01-01

A comprehensive analysis and conceptual design study of the turboalternator-compressor components using HeXe as the working fluid was performed. The study was conducted in three phases: general configuration analysis (Phase 1), design variations (Phase 2), and conceptual design study (Phase 3). During the Phase 1 analysis, individual turbine, alternator, compressor, and bearing and seal designs were evaluated. Six turboalternator-compressor (TAC) configurations were completed. Phase 2 consisted of evaluating one selected Phase 1 TAC configuration to calculate its performance when operating under new cycle conditions, namely, one higher and one lower turbine inlet temperature and one case with krypton as the working fluid. Based on the Phase 1 and 2 results, a TAC configuration that incorporated a radial compressor, a radial turbine, a Lundell alternator, and gas bearings was selected. During Phase 3 a new layout of the TAC was prepared that reflects the cycle state points necessary to accommodate a zirconium hydride moderated reactor and a 400 Hz alternator. The final TAC design rotates at 24,000 rpm and produces 160 kWe, 480 V, 3-phase, 400 hertz power.

Evaluating Management Information Systems, A Protocol for Automated Peer Review Systems

PubMed Central

Black, Gordon C.

1980-01-01

This paper discusses key issues in evaluating an automated Peer Review System. Included are the conceptual base, design, steps in planning structural components, operation parameters, criteria, costs and a detailed outline or protocol for use in the evaluation. At the heart of the Peer Review System is the criteria utilized for measuring quality. Criteria evaluation should embrace, as a minimum, appropriateness, validity and reliability, and completemess or comprehensiveness of content. Such an evaluation is not complete without determining the impact (clinical outcome) of the service system or the patient and the population served.

Focused training boosts revenue cycle skills, accountability.

PubMed

Richmond, Craig

2011-09-01

In 2009, the MetroHealth System took its first steps toward creating a comprehensive revenue cycle university, with the goal of developing revenue cycle staff talent and achieving best-in-class revenue cycle operations. MetroHealth became a beta site for HFMA's online Credentialed Revenue Cycle Representative (CRCR) program, and asked its revenue cycle leaders to present classes on key revenue cycle issues. As of June 2011, 62 percent of 122 revenue cycle employees who had taken the CRCR course passed the exam. The CRCR designation is now a prerequisite for career advancement in certain revenue cycle areas at MetroHealth.

Research safety vehicle. Phase II. Volume II. comprehensive technical results. Final report July 1975--December 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

DiNapoli, N.; Fitzpatrick, M.; Strother, C.

1977-11-01

Phase I identified trends leading to the desired national social goals of the mid-1980's in vehicle crashworthiness, crash avoidance, damageability, pedestrian safety, fuel economy, emissions and cost, and characterized an RSV to satisfy them. In Phase II an RSV prototype was designed, developed and tested to demonstrate the feasibility of meeting these goals simultaneously. Although further refinement is necessary to assure operational validity, in all categories the results meet or exceed the most advanced performance specified by The Presidential Task Force on Motor Vehicle Goals beyond 1980.

FAA Airport Design Competition for Universities

NASA Technical Reports Server (NTRS)

Sandy, Mary

2008-01-01

Raise awareness of the importance of airports to the National Airspace System infrastructure. Increase the involvement of the academic community in addressing airport operations and infrastructure issues and needs. Engage U.S. students in the conceptualization of applications, systems and equipment capable of addressing related challenges in a robust, reliable and comprehensive manner. Encourage U.S. undergraduate and graduate students to contribute innovative ideas and solutions to airport and runway safety issues. Provide the framework and incentives for quality educational experiences for university students. d Develop an awareness of and an interest in airports as a vital and interesting area for engineering and technology careers.

[Technology and progress in the use of information systems in the dental office].

PubMed

Walther, K

1989-09-01

The numerous DP systems used in dental offices are designed for administrative work. Data storage and management is limited to accountancy applications, and the advantages of the flow of information are restricted to operational purposes. Data of medical use are available only to a moderate extent. It should be possible, however, to use these information systems for processing purely medical data, for the structured input of comprehensive diagnostic information, and to have these data available for specific decisions. The use of a "decision-supporting system" has been tested in the documentation of dental diagnostic findings.

Interoperability Trends in Extravehicular Activity (EVA) Space Operations for the 21st Century

NASA Technical Reports Server (NTRS)

Miller, Gerald E.

1999-01-01

No other space operations in the 21 st century more comprehensively embody the challenges and dependencies of interoperability than EVA. This discipline is already functioning at an W1paralleled level of interagency, inter-organizational and international cooperation. This trend will only increase as space programs endeavor to expand in the face of shrinking budgets. Among the topics examined in this paper are hardware-oriented issues. Differences in design standards among various space participants dictate differences in the EVA tools that must be manufactured, flown and maintained on-orbit. Presently only two types of functional space suits exist in the world. However, three versions of functional airlocks are in operation. Of the three airlocks, only the International Space Station (ISS) Joint Airlock can accommodate both types of suits. Due to functional differences in the suits, completely different operating protocols are required for each. Should additional space suit or airlock designs become available, the complexity will increase. The lessons learned as a result of designing and operating within such a system are explored. This paper also examines the non-hardware challenges presented by interoperability for a discipline that is as uniquely dependent upon the individual as EVA. Operation of space suits (essentially single-person spacecrafts) by persons whose native language is not that of the suits' designers is explored. The intricacies of shared mission planning, shared control and shared execution of joint EVA's are explained. For example, once ISS is fully functional, the potential exists for two crewmembers of different nationality to be wearing suits manufactured and controlled by a third nation, while operating within an airlock manufactured and controlled by a fourth nation, in an effort to perform tasks upon hardware belonging to a fifth nation. Everything from training issues, to procedures development and writing, to real-time operations is addressed. Finally, this paper looks to the management challenges presented by interoperability in general. With budgets being reduced among all space-faring nations, the need to expand cooperation in the highly expensive field of human space operations is only going to intensify. The question facing management is not if the trend toward interoperation will continue, but how to best facilitate its doing so. Real-world EVA interoperability experience throughout the ShuttlelMir and ISS Programs is discussed to illustrate the challenges and

44 CFR 12.14 - Annual comprehensive review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... should be abolished. (b) Pertinent factors to be considered in the comprehensive review required by... programs or operations; (4) An evaluation of the utilization by the Agency of the committee's policy...

Design considerations for parallel graphics libraries

NASA Technical Reports Server (NTRS)

Crockett, Thomas W.

1994-01-01

Applications which run on parallel supercomputers are often characterized by massive datasets. Converting these vast collections of numbers to visual form has proven to be a powerful aid to comprehension. For a variety of reasons, it may be desirable to provide this visual feedback at runtime. One way to accomplish this is to exploit the available parallelism to perform graphics operations in place. In order to do this, we need appropriate parallel rendering algorithms and library interfaces. This paper provides a tutorial introduction to some of the issues which arise in designing parallel graphics libraries and their underlying rendering algorithms. The focus is on polygon rendering for distributed memory message-passing systems. We illustrate our discussion with examples from PGL, a parallel graphics library which has been developed on the Intel family of parallel systems.

Applicability of the Compensatory Encoding Model in Foreign Language Reading: An Investigation with Chinese College English Language Learners

PubMed Central

Han, Feifei

2017-01-01

While some first language (L1) reading models suggest that inefficient word recognition and small working memory tend to inhibit higher-level comprehension processes; the Compensatory Encoding Model maintains that slow word recognition and small working memory do not normally hinder reading comprehension, as readers are able to operate metacognitive strategies to compensate for inefficient word recognition and working memory limitation as long as readers process a reading task without time constraint. Although empirical evidence is accumulated for support of the Compensatory Encoding Model in L1 reading, there is lack of research for testing of the Compensatory Encoding Model in foreign language (FL) reading. This research empirically tested the Compensatory Encoding Model in English reading among Chinese college English language learners (ELLs). Two studies were conducted. Study one focused on testing whether reading condition varying time affects the relationship between word recognition, working memory, and reading comprehension. Students were tested on a computerized English word recognition test, a computerized Operation Span task, and reading comprehension in time constraint and non-time constraint reading. The correlation and regression analyses showed that the strength of association was much stronger between word recognition, working memory, and reading comprehension in time constraint than that in non-time constraint reading condition. Study two examined whether FL readers were able to operate metacognitive reading strategies as a compensatory way of reading comprehension for inefficient word recognition and working memory limitation in non-time constraint reading. The participants were tested on the same computerized English word recognition test and Operation Span test. They were required to think aloud while reading and to complete the comprehension questions. The think-aloud protocols were coded for concurrent use of reading strategies, classified into language-oriented strategies, content-oriented strategies, re-reading, pausing, and meta-comment. The correlation analyses showed that while word recognition and working memory were only significantly related to frequency of language-oriented strategies, re-reading, and pausing, but not with reading comprehension. Jointly viewed, the results of the two studies, complimenting each other, supported the applicability of the Compensatory Encoding Model in FL reading with Chinese college ELLs. PMID:28522984

Applicability of the Compensatory Encoding Model in Foreign Language Reading: An Investigation with Chinese College English Language Learners.

PubMed

Han, Feifei

2017-01-01

While some first language (L1) reading models suggest that inefficient word recognition and small working memory tend to inhibit higher-level comprehension processes; the Compensatory Encoding Model maintains that slow word recognition and small working memory do not normally hinder reading comprehension, as readers are able to operate metacognitive strategies to compensate for inefficient word recognition and working memory limitation as long as readers process a reading task without time constraint. Although empirical evidence is accumulated for support of the Compensatory Encoding Model in L1 reading, there is lack of research for testing of the Compensatory Encoding Model in foreign language (FL) reading. This research empirically tested the Compensatory Encoding Model in English reading among Chinese college English language learners (ELLs). Two studies were conducted. Study one focused on testing whether reading condition varying time affects the relationship between word recognition, working memory, and reading comprehension. Students were tested on a computerized English word recognition test, a computerized Operation Span task, and reading comprehension in time constraint and non-time constraint reading. The correlation and regression analyses showed that the strength of association was much stronger between word recognition, working memory, and reading comprehension in time constraint than that in non-time constraint reading condition. Study two examined whether FL readers were able to operate metacognitive reading strategies as a compensatory way of reading comprehension for inefficient word recognition and working memory limitation in non-time constraint reading. The participants were tested on the same computerized English word recognition test and Operation Span test. They were required to think aloud while reading and to complete the comprehension questions. The think-aloud protocols were coded for concurrent use of reading strategies, classified into language-oriented strategies, content-oriented strategies, re-reading, pausing, and meta-comment. The correlation analyses showed that while word recognition and working memory were only significantly related to frequency of language-oriented strategies, re-reading, and pausing, but not with reading comprehension. Jointly viewed, the results of the two studies, complimenting each other, supported the applicability of the Compensatory Encoding Model in FL reading with Chinese college ELLs.

A Look at Reading Comprehension

ERIC Educational Resources Information Center

Van Etten, Glen

1978-01-01

Reviewed are the literature and research on reading comprehension with elementary aged learning disabled and normal children as well as two specific programs designed to develop reading comprehension skills. (DB)

SP-100 - The national space reactor power system program in response to future needs

NASA Astrophysics Data System (ADS)

Armijo, J. S.; Josloff, A. T.; Bailey, H. S.; Matteo, D. N.

The SP-100 system has been designed to meet comprehensive and demanding NASA/DOD/DOE requirements. The key requirements include: nuclear safety for all mission phases, scalability from 10's to 100's of kWe, reliable performance at full power for seven years of partial power for ten years, survivability in civil or military threat environments, capability to operate autonomously for up to six months, capability to protect payloads from excessive radiation, and compatibility with shuttle and expendable launch vehicles. The authors address of major progress in terms of design, flexibility/scalability, survivability, and development. These areas, with the exception of survivability, are discussed in detail. There has been significant improvement in the generic flight system design with substantial mass savings and simplification that enhance performance and reliability. Design activity has confirmed the scalability and flexibility of the system and the ability to efficiently meet NASA, AF, and SDIO needs. SP-100 development continues to make significant progress in all key technology areas.

Desktop Publishing: The Effects of Computerized Formats on Reading Speed and Comprehension.

ERIC Educational Resources Information Center

Knupfer, Nancy Nelson; McIsaac, Marina Stock

1989-01-01

Describes study that was conducted to determine the effects of two electronic text variables used in desktop publishing on undergraduate students' reading speed and comprehension. Research on text variables, graphic design, instructional text design, and computer screen design is discussed, and further studies are suggested. (22 references) (LRW)

Do Particular Design Features Assist People with Aphasia to Comprehend Text? An Exploratory Study

ERIC Educational Resources Information Center

Wilson, Lucy; Read, Jennifer

2016-01-01

Background: Much of the evidence underlying guidelines for producing accessible information for people with aphasia focuses on client preference for particular design features. There is limited evidence regarding the effects of these features on comprehension. Aims: To examine the effects of specific design features on text comprehension. It was…

Is Word-Problem Solving a Form of Text Comprehension?

PubMed Central

Fuchs, Lynn S.; Fuchs, Douglas; Compton, Donald L.; Hamlett, Carol L.; Wang, Amber Y.

2015-01-01

This study’s hypotheses were that (a) word-problem (WP) solving is a form of text comprehension that involves language comprehension processes, working memory, and reasoning, but (b) WP solving differs from other forms of text comprehension by requiring WP-specific language comprehension as well as general language comprehension. At the start of the 2nd grade, children (n = 206; on average, 7 years, 6 months) were assessed on general language comprehension, working memory, nonlinguistic reasoning, processing speed (a control variable), and foundational skill (arithmetic for WPs; word reading for text comprehension). In spring, they were assessed on WP-specific language comprehension, WPs, and text comprehension. Path analytic mediation analysis indicated that effects of general language comprehension on text comprehension were entirely direct, whereas effects of general language comprehension on WPs were partially mediated by WP-specific language. By contrast, effects of working memory and reasoning operated in parallel ways for both outcomes. PMID:25866461

Propulsive machinery selection for repowering of an old patrol craft - A case study

NASA Astrophysics Data System (ADS)

Rahman, M. Muzibur; Mridha, A. H. Yusuf; Ahsan, Kazi Sakib

2017-12-01

This paper presents a case study of repowering peculiarities in relation to an old vessel. The vessel selected for study was designed for cruising speed of 15 knots. Over the years of operation the vessel's cruising speed reduced to about 8 knots. So, the owner wanted to repower it to have a fresh tenure of life and the work was given to a shipyard. But after replacement of old two engines by new engines of same power with different model, the performance of the vessel was not satisfactory. In the present paper, the problem is studied with comprehensive calculations of hydrostatic particulars and resistance of the ship. The analysis is carried out in respect of engine specifications, gear ratios, propeller design etc. and found that the operating ranges of new engines are not at par with the old engines. The new engine does not also match with old propeller. At this situation, comparative studies have determined that among all possible solutions redesign of propeller is the most suitable one and cost effective.

Avoid problems during distillation column startups

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sloley, A.W.

1996-07-01

The startup of a distillation column is the end product of the design process. Indeed, startup is the culmination of the theory and practice of designing the column to meet the process objectives. The author will direct most of this discussion towards column revamps due to their inherent complexity; however, the points apply equally to new columns, as well. The most important question that must be answered prior to a startup is how will the distillation system changes affect initial startup, process control of the system, and normal day-to-day operations? How will the operators run the system? Steady-state distillation-column simulationsmore » alone cannot provide an authoritative answer and, indeed, engineers` over-reliance on software too often has led them to ignore many practical aspects. Computer modeling, while an important engineering tool, is not reality. Distillation columns are real functioning pieces of equipment that require practical skills to successfully modify. They are not steady-state solutions that result from converged computer simulations. Early planning, coupled with thorough inspections and comprehensive reviews of instrumentation and procedures, can play a key role in assuring smooth startups.« less

Great Lakes transport of western coal: economic and technical analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elste, V.H.; Scher, R.M

1978-04-01

A comprehensive investigation of coal transportation from western mines via railroad unit trains plus water transport on the Great Lakes covers in detail: the design of coal colliers for the Great Lakes as limited in size by the Poe lock at Sault Ste. Marie or by river destinations; effects of ice freezing on the lakes or on the coal cargo; problems of designing for alternative transport of taconite pellets; the economic effects of variations in ship characteristics; the effect of fuel price and of operation through the winter; economic comparison of transport alternatives for various pairs of sources and destinations;more » the advantage (vs. a slurry pipeline) of being able to expand on a unit-by-unit basis; and that the rail-water route is lowest in cost for all destinations on the Great Lakes east of Detroit, but direct unit-train service to Chicago is either equal or superior to the rail-water combination. (''A unitrain operating on level track is a most energy-efficient producer of transportation and only an extremely large vessel can approach or equal this performance'').« less

Transient thermal, hydraulic, and mechanical analysis of a counter flow offset strip fin intermediate heat exchanger using an effective porous media approach

NASA Astrophysics Data System (ADS)

Urquiza, Eugenio

This work presents a comprehensive thermal hydraulic analysis of a compact heat exchanger using offset strip fins. The thermal hydraulics analysis in this work is followed by a finite element analysis (FEA) to predict the mechanical stresses experienced by an intermediate heat exchanger (IHX) during steady-state operation and selected flow transients. In particular, the scenario analyzed involves a gas-to-liquid IHX operating between high pressure helium and liquid or molten salt. In order to estimate the stresses in compact heat exchangers a comprehensive thermal and hydraulic analysis is needed. Compact heat exchangers require very small flow channels and fins to achieve high heat transfer rates and thermal effectiveness. However, studying such small features computationally contributes little to the understanding of component level phenomena and requires prohibitive computational effort using computational fluid dynamics (CFD). To address this issue, the analysis developed here uses an effective porous media (EPM) approach; this greatly reduces the computation time and produces results with the appropriate resolution [1]. This EPM fluid dynamics and heat transfer computational code has been named the Compact Heat Exchanger Explicit Thermal and Hydraulics (CHEETAH) code. CHEETAH solves for the two-dimensional steady-state and transient temperature and flow distributions in the IHX including the complicating effects of temperature-dependent fluid thermo-physical properties. Temperature- and pressure-dependent fluid properties are evaluated by CHEETAH and the thermal effectiveness of the IHX is also calculated. Furthermore, the temperature distribution can then be imported into a finite element analysis (FEA) code for mechanical stress analysis using the EPM methods developed earlier by the University of California, Berkeley, for global and local stress analysis [2]. These simulation tools will also allow the heat exchanger design to be improved through an iterative design process which will lead to a design with a reduced pressure drop, increased thermal effectiveness, and improved mechanical performance as it relates to creep deformation and transient thermal stresses.

New Designs for the Comprehensive High School. Executive Summary Report. A New Vision for the Comprehensive High School: Preparing Students for a Changing World.

ERIC Educational Resources Information Center

Copa, George H.; Pease, Virginia H.

A 2-year project to specify new designs for the comprehensive high school of the future identified the following important features: (1) a guaranteed set of learner outcomes closely linked to present and future life roles and responsibilities for all students; (2) learning applied to life situations, using authentic assessment; (3) multiple ways…

Intravenous sedation as an adjunct to advanced comprehensive dental implantology: the patient's perspective and operator satisfaction.

PubMed

McCrea, S J J

2015-03-13

The aim of this three-year study was to evaluate whether elective comprehensive dental implant procedures involving guided bone and soft tissue regeneration carried out under intravenous sedation (midazolam) would be influenced by patient self-reported pre-operative anxiety levels; age and gender; effect the level of sedation with respect to the amount of sedative administered and the time taken in the procedures; effect patient intra-operative cooperation, and post-operative levels of patient satisfaction; influence further acceptance of dental implant surgical procedures; effect intra-operative surgeon satisfaction and consequently his/her post-operative sense of achievement.Design Single centre general dental practice, open study as a clinical audit. One hundred and seventy-three consecutive patients undergoing prolonged surgical procedures involving dental implantology with the adjunctive facility of intravenous sedation were monitored with respect to self-reported levels of anxiety. Vital signs of heart rate, mean systolic and diastolic blood pressure and arterial oxygen saturation were recorded and monitored pre-intra- and post-surgery. A post-operative questionnaire was completed as to the perceptions of the level of sedation. A distinct relationship between self-reported pre-operative anxiety levels, age and gender were recorded - the younger the age, the higher the anxiety, with females dominating. Females required more midazolam than males. However, the analysis of the data as a whole, incorporating both genders, revealed a non-significant correlation result. The correlation between the midazolam dosage and the Corah anxiety score produced a p value result of: r (161) = 0.008, p <0.01. Forty-four percent of the patients described themselves as having 'high anxiety and fear of the dentist', however, 99.4% of the patients answered 'yes' to having sedation again in the future. For the purpose of this study, detailed consideration was given to the gender specific results in order to reveal a wider understanding of who poses as a 'cooperative patient'. The results should prompt a rethink as to who a cooperative patient is, and whether the self-assessed level of anxiety will influence further acceptance of dental implant surgical procedures under intravenous sedation.

Memory Interference as a Determinant of Language Comprehension

PubMed Central

Van Dyke, Julie A.; Johns, Clinton L.

2012-01-01

The parameters of the human memory system constrain the operation of language comprehension processes. In the memory literature, both decay and interference have been proposed as causes of forgetting; however, while there is a long history of research establishing the nature of interference effects in memory, the effects of decay are much more poorly supported. Nevertheless, research investigating the limitations of the human sentence processing mechanism typically focus on decay-based explanations, emphasizing the role of capacity, while the role of interference has received comparatively little attention. This paper reviews both accounts of difficulty in language comprehension by drawing direct connections to research in the memory domain. Capacity-based accounts are found to be untenable, diverging substantially from what is known about the operation of the human memory system. In contrast, recent research investigating comprehension difficulty using a retrieval-interference paradigm is shown to be wholly consistent with both behavioral and neuropsychological memory phenomena. The implications of adopting a retrieval-interference approach to investigating individual variation in language comprehension are discussed. PMID:22773927

Failure mode and effects analysis using intuitionistic fuzzy hybrid weighted Euclidean distance operator

NASA Astrophysics Data System (ADS)

Liu, Hu-Chen; Liu, Long; Li, Ping

2014-10-01

Failure mode and effects analysis (FMEA) has shown its effectiveness in examining potential failures in products, process, designs or services and has been extensively used for safety and reliability analysis in a wide range of industries. However, its approach to prioritise failure modes through a crisp risk priority number (RPN) has been criticised as having several shortcomings. The aim of this paper is to develop an efficient and comprehensive risk assessment methodology using intuitionistic fuzzy hybrid weighted Euclidean distance (IFHWED) operator to overcome the limitations and improve the effectiveness of the traditional FMEA. The diversified and uncertain assessments given by FMEA team members are treated as linguistic terms expressed in intuitionistic fuzzy numbers (IFNs). Intuitionistic fuzzy weighted averaging (IFWA) operator is used to aggregate the FMEA team members' individual assessments into a group assessment. IFHWED operator is applied thereafter to the prioritisation and selection of failure modes. Particularly, both subjective and objective weights of risk factors are considered during the risk evaluation process. A numerical example for risk assessment is given to illustrate the proposed method finally.

Human Reliability Assessments: Using the Past (Shuttle) to Predict the Future (ORION)

NASA Technical Reports Server (NTRS)

Mott, Diana L.; Bigler, Mark A.

2017-01-01

NASA uses two HRA assessment methodologies. The first is a simplified method which is based on how much time is available to complete the action, with consideration included for environmental and personal factors that could influence the human's reliability. This method is expected to provide a conservative value or placeholder as a preliminary estimate. This preliminary estimate is used to determine which placeholder needs a more detailed assessment. The second methodology is used to develop a more detailed human reliability assessment on the performance of critical human actions. This assessment needs to consider more than the time available, this would include factors such as: the importance of the action, the context, environmental factors, potential human stresses, previous experience, training, physical design interfaces, available procedures/checklists and internal human stresses. The more detailed assessment is still expected to be more realistic than that based primarily on time available. When performing an HRA on a system or process that has an operational history, we have information specific to the task based on this history and experience. In the case of a PRA model that is based on a new design and has no operational history, providing a "reasonable" assessment of potential crew actions becomes more problematic. In order to determine what is expected of future operational parameters, the experience from individuals who had relevant experience and were familiar with the system and process previously implemented by NASA was used to provide the "best" available data. Personnel from Flight Operations, Flight Directors, Launch Test Directors, Control Room Console Operators and Astronauts were all interviewed to provide a comprehensive picture of previous NASA operations. Verification of the assumptions and expectations expressed in the assessments will be needed when the procedures, flight rules and operational requirements are developed and then finalized.

Correlation analysis on real-time tab-delimited network monitoring data

DOE PAGES

Pan, Aditya; Majumdar, Jahin; Bansal, Abhay; ...

2016-01-01

End-End performance monitoring in the Internet, also called PingER is a part of SLAC National Accelerator Laboratory’s research project. It was created to answer the growing need to monitor network both to analyze current performance and to designate resources to optimize execution between research centers, and the universities and institutes co-operating on present and future operations. The monitoring support reflects the broad geographical area of the collaborations and requires a comprehensive number of research and financial channels. The data architecture retrieval and methodology of the interpretation have emerged over numerous years. Analyzing this data is the main challenge due tomore » its high volume. Finally, by using correlation analysis, we can make crucial conclusions about how the network data affects the performance of the hosts and how it depends from countries to countries.« less

Eigenpolarization theory of monolithic nonplanar ring oscillators

NASA Technical Reports Server (NTRS)

Nilsson, Alan C.; Gustafson, Eric K.; Byer, Robert L.

1989-01-01

Diode-laser-pumped monolithic nonplanar ring oscillators (NPROs) in an applied magnetic field can operate as unidirectional traveling-wave lasers. The diode laser pumping, monolithic construction, and unidirectional oscillation lead to narrow linewidth radiation. Here, a comprehensive theory of the eigenpolarizations of a monolithic NPRO is presented. It is shown how the properties of the integral optical diode that forces unidirectional operation depend on the choice of the gain medium, the applied magnetic field, the output coupler, and the geometry of the nonplanar ring light path. Using optical equivalence theorems to gain insight into the polarization characteristics of the NPRO, a strategy for designing NPROs with low thresholds and large loss nonreciprocities is given. An analysis of the eigenpolarizations for one such NPRO is presented, alternative optimization approaches are considered, and the prospects for further reducing the linewidths of these lasers are briefly discussed.

The determination of operational and support requirements and costs during the conceptual design of space systems

NASA Technical Reports Server (NTRS)

Ebeling, Charles; Beasley, Kenneth D.

1992-01-01

The first year of research to provide NASA support in predicting operational and support parameters and costs of proposed space systems is reported. Some of the specific research objectives were (1) to develop a methodology for deriving reliability and maintainability parameters and, based upon their estimates, determine the operational capability and support costs, and (2) to identify data sources and establish an initial data base to implement the methodology. Implementation of the methodology is accomplished through the development of a comprehensive computer model. While the model appears to work reasonably well when applied to aircraft systems, it was not accurate when used for space systems. The model is dynamic and should be updated as new data become available. It is particularly important to integrate the current aircraft data base with data obtained from the Space Shuttle and other space systems since subsystems unique to a space vehicle require data not available from aircraft. This research only addressed the major subsystems on the vehicle.

A comprehensive approach to decipher biological computation to achieve next generation high-performance exascale computing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, Conrad D.; Schiess, Adrian B.; Howell, Jamie

2013-10-01

The human brain (volume=1200cm3) consumes 20W and is capable of performing > 10^16 operations/s. Current supercomputer technology has reached 1015 operations/s, yet it requires 1500m^3 and 3MW, giving the brain a 10^12 advantage in operations/s/W/cm^3. Thus, to reach exascale computation, two achievements are required: 1) improved understanding of computation in biological tissue, and 2) a paradigm shift towards neuromorphic computing where hardware circuits mimic properties of neural tissue. To address 1), we will interrogate corticostriatal networks in mouse brain tissue slices, specifically with regard to their frequency filtering capabilities as a function of input stimulus. To address 2), we willmore » instantiate biological computing characteristics such as multi-bit storage into hardware devices with future computational and memory applications. Resistive memory devices will be modeled, designed, and fabricated in the MESA facility in consultation with our internal and external collaborators.« less

Effects of wastewater constituents and operational conditions on the composition and dynamics of anodic microbial communities in bioelectrochemical systems.

PubMed

Kokko, Marika; Epple, Stefanie; Gescher, Johannes; Kerzenmacher, Sven

2018-06-01

Over the last decade, there has been an ever-growing interest in bioelectrochemical systems (BES) as a sustainable technology enabling simultaneous wastewater treatment and biological production of, e.g. electricity, hydrogen, and further commodities. A key component of any BES degrading organic matter is the anode where electric current is biologically generated from the oxidation of organic compounds. The performance of BES depends on the interactions of the anodic microbial communities. To optimize the operational parameters and process design of BES a better comprehension of the microbial community dynamics and interactions at the anode is required. This paper reviews the abundance of different microorganisms in anodic biofilms and discusses their roles and possible side reactions with respect to their implications on the performance of BES utilizing wastewaters. The most important operational parameters affecting anodic microbial communities grown with wastewaters are highlighted and guidelines for controlling the composition of microbial communities are given. Copyright © 2018 Elsevier Ltd. All rights reserved.

High-pressure plastic scintillation detector for measuring radiogenic gases in flow systems

NASA Astrophysics Data System (ADS)

Schell, W. R.; Vives-Batlle, J.; Yoon, S. R.; Tobin, M. J.

1999-02-01

Radioactive gases are emitted into the atmosphere from nuclear electric power and nuclear fuel reprocessing plants, from hospitals discarding xenon used in diagnostic medicine, as well as from nuclear weapons tests. A high-pressure plastic scintillation detector was constructed to measure atmospheric levels of such radioactive gases by detecting the beta and internal conversion (IC) electron decays. Operational tests and calibrations were made that permit integration of the flow detectors into a portable Gas Analysis, Separation and Purification system (GASP). The equipment developed can be used for measuring fission gases released from nuclear reactor sources and/or as part of monitoring equipment for enforcing the Comprehensive Test Ban Treaty. The detector is being used routinely for in-line gas separation efficiency measurements, at the elevated operational pressures used for the high-pressure swing analysis system (2070 kPa) and at flow rates of 5-15 l/min [1, 2]. This paper presents the design features, operational methods, calibration, and detector applications.

The 2017 International Joint Working Group White Paper by INDUSEM, the Emergency Medicine Association and the Academic College of Emergency Experts on Establishing Standardized Regulations, Operational Mechanisms, and Accreditation Pathways for Education and Care Provided by the Prehospital Emergency Medical Service Systems in India

PubMed Central

Sikka, Veronica; Gautam, V.; Galwankar, Sagar; Guleria, Randeep; Stawicki, Stanislaw P.; Paladino, Lorenzo; Chauhan, Vivek; Menon, Geetha; Shah, Vijay; Srivastava, R. P.; Rana, B. K.; Batra, Bipin; Kalra, OP.; Aggarwal, P.; Bhoi, Sanjeev; Krishnan, S. Vimal

2017-01-01

The government of India has done remarkable work on commissioning a government funded prehospital emergency ambulance service in India. This has both public health implications and an economic impact on the nation. With the establishment of these services, there is an acute need for standardization of education and quality assurance regarding prehospital care provided. The International Joint Working Group has been actively involved in designing guidelines and establishing a comprehensive framework for ensuring high-quality education and clinical standards of care for prehospital services in India. This paper provides an independent expert opinion and a proposed framework for general operations and administration of a standardized, national prehospital emergency medical systems program. Program implementation, operational details, and regulations will require close collaboration between key stakeholders, including local, regional, and national governmental agencies of India. PMID:28855780

Optimal two-stage enrichment design correcting for biomarker misclassification.

PubMed

Zang, Yong; Guo, Beibei

2018-01-01

The enrichment design is an important clinical trial design to detect the treatment effect of the molecularly targeted agent (MTA) in personalized medicine. Under this design, patients are stratified into marker-positive and marker-negative subgroups based on their biomarker statuses and only the marker-positive patients are enrolled into the trial and randomized to receive either the MTA or a standard treatment. As the biomarker plays a key role in determining the enrollment of the trial, a misclassification of the biomarker can induce substantial bias, undermine the integrity of the trial, and seriously affect the treatment evaluation. In this paper, we propose a two-stage optimal enrichment design that utilizes the surrogate marker to correct for the biomarker misclassification. The proposed design is optimal in the sense that it maximizes the probability of correctly classifying each patient's biomarker status based on the surrogate marker information. In addition, after analytically deriving the bias caused by the biomarker misclassification, we develop a likelihood ratio test based on the EM algorithm to correct for such bias. We conduct comprehensive simulation studies to investigate the operating characteristics of the optimal design and the results confirm the desirable performance of the proposed design.

Mission Planning and Scheduling System for NASA's Lunar Reconnaissance Mission

NASA Technical Reports Server (NTRS)

Garcia, Gonzalo; Barnoy, Assaf; Beech, Theresa; Saylor, Rick; Cosgrove, Jennifer Sager; Ritter, Sheila

2009-01-01

In the framework of NASA's return to the Moon efforts, the Lunar Reconnaissance Orbiter (LRO) is the first step. It is an unmanned mission to create a comprehensive atlas of the Moon's features and resources necessary to design and build a lunar outpost. LRO is scheduled for launch in April, 2009. LRO carries a payload comprised of six instruments and one technology demonstration. In addition to its scientific mission LRO will use new technologies, systems and flight operations concepts to reduce risk and increase productivity of future missions. As part of the effort to achieve robust and efficient operations, the LRO Mission Operations Team (MOT) will use its Mission Planning System (MPS) to manage the operational activities of the mission during the Lunar Orbit Insertion (LOI) and operational phases of the mission. The MPS, based on GMV's flexplan tool and developed for NASA with Honeywell Technology Solutions (prime contractor), will receive activity and slew maneuver requests from multiple science operations centers (SOC), as well as from the spacecraft engineers. flexplan will apply scheduling rules to all the requests received and will generate conflict free command schedules in the form of daily stored command loads for the orbiter and a set of daily pass scripts that help automate nominal real-time operations.

Reinforce Design and Construction Issues with a Comprehensive Laboratory Project.

ERIC Educational Resources Information Center

Schemmel, John J.

In 1996, a comprehensive project was introduced in the first course of Reinforced Concrete Design, CVEG 4303 at the University of Arkansas. The primary purpose of this project was to highlight issues related to the construction of reinforced concrete elements. This semester-long project involves the design, fabrication, and testing of 8-foot long…

Development of Standard Station Interface for Comprehensive Nuclear Test Ban Treaty Organistation Monitoring Networks

NASA Astrophysics Data System (ADS)

Dricker, I. G.; Friberg, P.; Hellman, S.

2001-12-01

Under the contract with the CTBTO, Instrumental Software Technologies Inc., (ISTI) has designed and developed a Standard Station Interface (SSI) - a set of executable programs and application programming interface libraries for acquisition, authentication, archiving and telemetry of seismic and infrasound data for stations of the CTBTO nuclear monitoring network. SSI (written in C) is fully supported under both the Solaris and Linux operating systems and will be shipped with fully documented source code. SSI consists of several interconnected modules. The Digitizer Interface Module maintains a near-real-time data flow between multiple digitizers and the SSI. The Disk Buffer Module is responsible for local data archival. The Station Key Management Module is a low-level tool for data authentication and verification of incoming signatures. The Data Transmission Module supports packetized near-real-time data transmission from the primary CTBTO stations to the designated Data Center. The AutoDRM module allows transport of seismic and infrasound signed data via electronic mail (auxiliary station mode). The Command Interface Module is used to pass the remote commands to the digitizers and other modules of SSI. A station operator has access to the state-of-health information and waveforms via an the Operator Interface Module. Modular design of SSI will allow painless extension of the software system within and outside the boundaries of CTBTO station requirements. Currently an alpha version of SSI undergoes extensive tests in the lab and onsite.

Key Reliability Drivers of Liquid Propulsion Engines and A Reliability Model for Sensitivity Analysis

NASA Technical Reports Server (NTRS)

Huang, Zhao-Feng; Fint, Jeffry A.; Kuck, Frederick M.

2005-01-01

This paper is to address the in-flight reliability of a liquid propulsion engine system for a launch vehicle. We first establish a comprehensive list of system and sub-system reliability drivers for any liquid propulsion engine system. We then build a reliability model to parametrically analyze the impact of some reliability parameters. We present sensitivity analysis results for a selected subset of the key reliability drivers using the model. Reliability drivers identified include: number of engines for the liquid propulsion stage, single engine total reliability, engine operation duration, engine thrust size, reusability, engine de-rating or up-rating, engine-out design (including engine-out switching reliability, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction), propellant specific hazards, engine start and cutoff transient hazards, engine combustion cycles, vehicle and engine interface and interaction hazards, engine health management system, engine modification, engine ground start hold down with launch commit criteria, engine altitude start (1 in. start), Multiple altitude restart (less than 1 restart), component, subsystem and system design, manufacturing/ground operation support/pre and post flight check outs and inspection, extensiveness of the development program. We present some sensitivity analysis results for the following subset of the drivers: number of engines for the propulsion stage, single engine total reliability, engine operation duration, engine de-rating or up-rating requirements, engine-out design, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction, and engine health management system implementation (basic redlines and more advanced health management systems).

Toward a Model of Text Comprehension and Production.

ERIC Educational Resources Information Center

Kintsch, Walter; Van Dijk, Teun A.

1978-01-01

Described is the system of mental operations occurring in text comprehension and in recall and summarization. A processing model is outlined: 1) the meaning elements of a text become organized into a coherent whole, 2) the full meaning of the text is condensed into its gist, and 3) new texts are generated from the comprehension processes.…

Progress and Impact. A Report of Programs Funded for 1995-96 by the Comprehensive Health Education Act of 1990.

ERIC Educational Resources Information Center

Terrill, Jerry L.; Connell, Karen

During the 1995-96 school year, the Colorado Department of Education supported Comprehensive Health Education Programs as authorized by the Comprehensive Health Education Act of 1990. This report summarizes the projects funded under that grant along with additional observations and recommendations regarding the operation of such grants. Grant…

Determination of 32 cathinone derivatives and other designer drugs in serum by comprehensive LC-QQQ-MS/MS analysis.

PubMed

Swortwood, Madeleine J; Boland, Diane M; DeCaprio, Anthony P

2013-02-01

Recently, clandestine drug lab operators have attempted to bypass controlled substances laws and regulations with "designer" compounds chemically and pharmacologically similar to controlled substances. For example, "bath salts" have erupted onto the scene as "legal highs" containing cathinone analogs that have produced severe side effects in users worldwide. These products have sparked concern among law enforcement agencies, and emergency bans have been placed on the sale of such items. Despite the increasing number of designer drugs available, there are few comprehensive screening techniques for their detection and quantification in biological specimens. The liquid chromatography triple quadrupole tandem mass spectrometry (LC-QQQ-MS/MS) method presented here encompasses over thirty important compounds within the phenethylamine, tryptamine, and piperazine designer drug classes. Analytes were determined by LC-QQQ-MS/MS in the multiple-reaction monitoring mode after mixed-mode solid-phase extraction. The bioanalytical method was fully validated according to recommended international guidelines. The assay was selective for all analytes with acceptable accuracy and precision. Limits of quantification were in the range of 1-10 ng/mL for each compound with limits of detection near 10 pg/mL. In order to evaluate its applicability in a forensic toxicological setting, the validated method was used to analyze post-mortem specimens from two cases that were suspected of containing designer drugs. The method was able to identify and quantify seven of these compounds at concentrations as low as 11 ng/mL. The method should have wide applicability for rapid screening of important new drugs of abuse at high sensitivity in both post- and ante-mortem forensic analysis.

Designing Excellence and Quality Model for Training Centers of Primary Health Care: A Delphi Method Study.

PubMed

Tabrizi, Jafar-Sadegh; Farahbakhsh, Mostafa; Shahgoli, Javad; Rahbar, Mohammad Reza; Naghavi-Behzad, Mohammad; Ahadi, Hamid-Reza; Azami-Aghdash, Saber

2015-10-01

Excellence and quality models are comprehensive methods for improving the quality of healthcare. The aim of this study was to design excellence and quality model for training centers of primary health care using Delphi method. In this study, Delphi method was used. First, comprehensive information were collected using literature review. In extracted references, 39 models were identified from 34 countries and related sub-criteria and standards were extracted from 34 models (from primary 39 models). Then primary pattern including 8 criteria, 55 sub-criteria, and 236 standards was developed as a Delphi questionnaire and evaluated in four stages by 9 specialists of health care system in Tabriz and 50 specialists from all around the country. Designed primary model (8 criteria, 55 sub-criteria, and 236 standards) were concluded with 8 criteria, 45 sub-criteria, and 192 standards after 4 stages of evaluations by specialists. Major criteria of the model are leadership, strategic and operational planning, resource management, information analysis, human resources management, process management, costumer results, and functional results, where the top score was assigned as 1000 by specialists. Functional results had the maximum score of 195 whereas planning had the minimum score of 60. Furthermore the most and the least sub-criteria was for leadership with 10 sub-criteria and strategic planning with 3 sub-criteria, respectively. The model that introduced in this research has been designed following 34 reference models of the world. This model could provide a proper frame for managers of health system in improving quality.

Architecture Studio Archive: A Case Study in the Comprehensive Digital Capture and Repository of Student Design Work as an Aid to Teaching, Research, and Accreditation

ERIC Educational Resources Information Center

Anderson, Ross; Arndell, Michael; Christensen, Sten

2009-01-01

The "Architecture Studio Archive" pilot sought to form a comprehensive digital archive of the diverse student work conducted in the first year of the Bachelor of Design in Architecture Degree at the University of Sydney. The design studio is the primary vehicle for teaching architectural design. It is a locus for creative activity, with…

Toward a Formal Model of the Design and Evolution of Software

DTIC Science & Technology

1988-12-20

should have the flezibiity to support a variety of design methodologies, be compinhenaive enough to encompass the gamut of software lifecycle...the future. It should have the flezibility to support a variety of design methodologies, be comprehensive enough to encompass the gamut of software...variety of design methodologies, be comprehensive enough to encompass the gamut of software lifecycle activities, and be precise enough to provide the

Hall Thruster Thermal Modeling and Test Data Correlation

NASA Technical Reports Server (NTRS)

Myers, James; Kamhawi, Hani; Yim, John; Clayman, Lauren

2016-01-01

The life of Hall Effect thrusters are primarily limited by plasma erosion and thermal related failures. NASA Glenn Research Center (GRC) in cooperation with the Jet Propulsion Laboratory (JPL) have recently completed development of a Hall thruster with specific emphasis to mitigate these limitations. Extending the operational life of Hall thursters makes them more suitable for some of NASA's longer duration interplanetary missions. This paper documents the thermal model development, refinement and correlation of results with thruster test data. Correlation was achieved by minimizing uncertainties in model input and recognizing the relevant parameters for effective model tuning. Throughout the thruster design phase the model was used to evaluate design options and systematically reduce component temperatures. Hall thrusters are inherently complex assemblies of high temperature components relying on internal conduction and external radiation for heat dispersion and rejection. System solutions are necessary in most cases to fully assess the benefits and/or consequences of any potential design change. Thermal model correlation is critical since thruster operational parameters can push some components/materials beyond their temperature limits. This thruster incorporates a state-of-the-art magnetic shielding system to reduce plasma erosion and to a lesser extend power/heat deposition. Additionally a comprehensive thermal design strategy was employed to reduce temperatures of critical thruster components (primarily the magnet coils and the discharge channel). Long term wear testing is currently underway to assess the effectiveness of these systems and consequently thruster longevity.

Providing Independent Reading Comprehension Strategy Practice through Workstations

ERIC Educational Resources Information Center

Young, Chase

2014-01-01

This article describes an action research project undertaken by a second grade teacher looking for research-based ways to increase his students' reading comprehension. He designed fifteen comprehension workstations and evaluated their effect on his second graders' reading comprehension scores as measured by district Imagination Station…

75 FR 45641 - Guidance for Industry on Label Comprehension Studies for Nonprescription Drug Products; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

...] Guidance for Industry on Label Comprehension Studies for Nonprescription Drug Products; Availability AGENCY... announcing the availability of a guidance for industry entitled ``Label Comprehension Studies for Nonprescription Drug Products.'' The guidance provides recommendations on the design of label comprehension...

The business of palliative medicine--part 6: clinical operations in a comprehensive integrated program.

PubMed

Lagman, Ruth L; Walsh, Declan; LeGrand, Susan B; Davis, Mellar P

2011-03-01

The medical care of individuals with advanced disease is complex and has historically been fragmented and suboptimal. Palliative medicine attempts to address these needs. The Harry R. Horvitz Center for Palliative Medicine at the Cleveland Clinic is an established comprehensive integrated program. Structured and seamless clinical operations are important to ensure the best delivery of high-quality medical care and continuity for those affected by life-limiting illness.

Age-related differences in warning symbol comprehension and training effectiveness: effects of familiarity, complexity, and comprehensibility.

PubMed

Lesch, M F; Horrey, W J; Wogalter, M S; Powell, W R

2011-10-01

Age-related changes in selective attention, inhibitory efficiency, and the ability to form new associations suggest that older adults may have greater difficulty with more complex and less comprehensible symbols. We examined comprehension of symbols varying in terms of ratings of familiarity, complexity, and comprehensibility, by younger (aged 18-35) and older (aged 55-70) adults. It was found that older adults have greater difficulty than younger adults in comprehending warning symbols and that accident scenario training improves comprehension. Regression analyses indicated that familiarity and comprehensibility were important in determining performance on the pre-training comprehension test by both younger and older adults. However, training eliminated the effects of stimulus characteristics for younger adults, while older adults' comprehension continued to be significantly influenced by comprehensibility. We suggest that symbol design incorporates cues to knowledge to facilitate the linkage between new knowledge (i.e. the warning symbol) and relevant knowledge in long-term memory. Statement of Relevance: Symbol characteristics play an important role in age-related differences in warning symbol comprehension. To optimise comprehension by older adults, symbols should have a clear relationship with areal-world referent. Alternatively, symbol design could incorporate cues to knowledge to facilitate the linkage between new knowledge and relevant knowledge in long-term memory.

511 travel information service development & documentation.

DOT National Transportation Integrated Search

2011-10-01

"511 New York was deployed as a free, comprehensive travel information system geared to meet the multimodal needs of commuters, long-distance and local travelers, tourists and commercial-vehicle operators. The up-to-the-minute, comprehensive transpor...

Design and implementation of an audit trail in compliance with US regulations.

PubMed

Jiang, Keyuan; Cao, Xiang

2011-10-01

Audit trails have been used widely to ensure quality of study data and have been implemented in computerized clinical trials data systems. Increasingly, there is a need to audit access to study participant identifiable information to provide assurance that study participant privacy is protected and confidentiality is maintained. In the United States, several federal regulations specify how the audit trail function should be implemented. To describe the development and implementation of a comprehensive audit trail system that meets the regulatory requirements of assuring data quality and integrity and protecting participant privacy and that is also easy to implement and maintain. The audit trail system was designed and developed after we examined regulatory requirements, data access methods, prevailing application architecture, and good security practices. Our comprehensive audit trail system was developed and implemented at the database level using a commercially available database management software product. It captures both data access and data changes with the correct user identifier. Documentation of access is initiated automatically in response to either data retrieval or data change at the database level. Currently, our system has been implemented only on one commercial database management system. Although our audit trail algorithm does not allow for logging aggregate operations, aggregation does not reveal sensitive private participant information. Careful consideration must be given to data items selected for monitoring because selection of all data items using our system can dramatically increase the requirements for computer disk space. Evaluating the criticality and sensitivity of individual data items selected can control the storage requirements for clinical trial audit trail records. Our audit trail system is capable of logging data access and data change operations to satisfy regulatory requirements. Our approach is applicable to virtually any data that can be stored in a relational database.

[A comprehensive approach to designing of magnetotherapy techniques based on the Atos device].

PubMed

Raĭgorodskiĭ, Iu M; Semiachkin, G P; Tatarenko, D A

1995-01-01

The paper determines how to apply a comprehensive approach to designing magnetic therapeutical techniques based on concomitant exposures to two or more physical factors. It shows the advantages of the running pattern of a magnetic field and photostimuli in terms of optimization of physiotherapeutical exposures. An Atos apparatus with an Amblio-1 attachment is used as an example to demonstrate how to apply the comprehensive approach for ophthalmology.

Iconic Gestures for Robot Avatars, Recognition and Integration with Speech

PubMed Central

Bremner, Paul; Leonards, Ute

2016-01-01

Co-verbal gestures are an important part of human communication, improving its efficiency and efficacy for information conveyance. One possible means by which such multi-modal communication might be realized remotely is through the use of a tele-operated humanoid robot avatar. Such avatars have been previously shown to enhance social presence and operator salience. We present a motion tracking based tele-operation system for the NAO robot platform that allows direct transmission of speech and gestures produced by the operator. To assess the capabilities of this system for transmitting multi-modal communication, we have conducted a user study that investigated if robot-produced iconic gestures are comprehensible, and are integrated with speech. Robot performed gesture outcomes were compared directly to those for gestures produced by a human actor, using a within participant experimental design. We show that iconic gestures produced by a tele-operated robot are understood by participants when presented alone, almost as well as when produced by a human. More importantly, we show that gestures are integrated with speech when presented as part of a multi-modal communication equally well for human and robot performances. PMID:26925010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nester, Patrick

The rooftop Photovoltaic (PV) panels and radiant piping project was constructed by Fort Mason Center as part of its $21 million comprehensive rehabilitation of the Pier 2 shed which include the shed’s electrical, natural gas and water systems. Fort Mason Center improved performance while reducing energy and water usage and costs to demonstrate the efficiencies and opportunities available to large multi-function facilities. The scalable demand of these facilities required a layered approach to conservation, control and production. The project employed a comprehensive retrofit of electrical natural gas, and plumbing systems to maximize efficiency and lower carbon footprint specifically to demonstratemore » the effectiveness of these strategies in a public setting with varied and diverse use. The project was completed in July 2014 and met the expected outcomes regarding increased comfort and operational efficiency throughout the Pier 2 shed as well as on site electrical generation of current consumption. The entire Pier 2 shed project won a 2015 California Preservation Foundation design award for historic rehabilitation.« less

ORNL Remedial Action Program strategy (FY 1987-FY 1992)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trabalka, J.R.; Myrick, T.E.

1987-12-01

Over 40 years of Oak Ridge National Laboratory (ORNL) operations have produced a diverse legacy of contaminated inactive facilities, research areas, and waste disposal areas that are potential candidates for remedial action. The ORNL Remedial Action Program (RAP) represents a comprehensive effort to meet new regulatory requirements and ensure adequate protection of on-site workers, the public, and the environment by providing appropriate corrective measures at over 130 sites contaminated historically with radioactive, hazardous chemical, or mixed wastes. A structured path of program planning, site characterization, alternatives assessment, technology development, engineering design, continued site maintenance and surveillance, interim corrective action, andmore » eventual site closure or decommissioning is required to meet these objectives. This report documents the development of the Remedial Action Program, through its preliminary characterization, regulatory interface, and strategy development activities. It provides recommendations for a comprehensive, long-term strategy consistent with existing technical, institutional, and regulatory information, along with a six-year plan for achieving its initial objectives. 53 refs., 8 figs., 12 tabs.« less

Further Examination of the Vibratory Loads Reduction Results from the NASA/ARMY/MIT Active Twist Rotor Test

NASA Technical Reports Server (NTRS)

Wilbur, Matthew L.; Yeager, William T., Jr.; Sekula, Martin K.

2002-01-01

The vibration reduction capabilities of a model rotor system utilizing controlled, strain-induced blade twisting are examined. The model rotor blades, which utilize piezoelectric active fiber composite actuators, were tested in the NASA Langley Transonic Dynamics Tunnel using open-loop control to determine the effect of active-twist on rotor vibratory loads. The results of this testing have been encouraging, and have demonstrated that active-twist rotor designs offer the potential for significant load reductions in future helicopter rotor systems. Active twist control was found to use less than 1% of the power necessary to operate the rotor system and had a pronounced effect on both rotating- and fixed-system loads, offering reductions in individual harmonic loads of up to 100%. A review of the vibration reduction results obtained is presented, which includes a limited set of comparisons with results generated using the second-generation version of the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II) rotorcraft comprehensive analysis.

Evaluation of use of reading comprehension strategies to improve reading comprehension of adult college students with acquired brain injury.

PubMed

Griffiths, Gina G; Sohlberg, McKay Moore; Kirk, Cecilia; Fickas, Stephen; Biancarosa, Gina

2016-01-01

Adults with mild to moderate acquired brain injury (ABI) often pursue post-secondary or professional education after their injuries in order to enter or re-enter the job market. An increasing number of these adults report problems with reading-to-learn. The problem is particularly concerning given the growing population of adult survivors of ABI. Despite the rising need, empirical evaluation of reading comprehension interventions for adults with ABI is scarce. This study used a within-subject design to evaluate whether adult college students with ABI with no more than moderate cognitive impairments benefited from using reading comprehension strategies to improve comprehension of expository text. Integrating empirical support from the cognitive rehabilitation and special education literature, the researchers designed a multi-component reading comprehension strategy package. Participants read chapters from an introductory-level college anthropology textbook in two different conditions: strategy and no-strategy. The results indicated that reading comprehension strategy use was associated with recall of more correct information units in immediate and delayed free recall tasks; more efficient recall in the delayed free recall task; and increased accuracy recognising statements from a sentence verification task designed to reflect the local and global coherence of the text. The findings support further research into using reading comprehension strategies as an intervention approach for the adult ABI population. Future research needs include identifying how to match particular reading comprehension strategies to individuals, examining whether reading comprehension performance improves further through the incorporation of systematic training, and evaluating texts from a range of disciplines and genres.

Improving text comprehension strategies in upper primary school children: a design experiment.

PubMed

De Corte, E; Verschaffel, L; Van De Ven, A

2001-12-01

With respect to the acquisition of competence in reading, new standards for primary education stress more than before the importance of learning and teaching cognitive and metacognitive strategies that facilitate text comprehension. Therefore, there is a need to design a research-based instructional approach to strategic reading comprehension. The design experiment aimed at developing, implementing and evaluating a research-based, but also practically applicable learning environment for enhancing skilled strategy use in upper primary school children when reading a text. Four text comprehension strategies (activating prior knowledge, clarifying difficult words, making a schematic representation of the text, and formulating the main idea) and a metacognitive strategy (regulating one's own reading process) were trained through a variety of highly interactive instructional techniques, namely modelling, whole class discussion, and small group work in the format of reciprocal teaching. Participants in the study were four experimental 5th grade classes (79 children) and eight comparable control classes (149 pupils). The effects of the learning environment were measured using a pretest-post-test-retention design. Multilevel hierarchical linear regression models were used to analyse the quantitative data of a Reading Strategy Test, a standardised Reading Comprehension Test, a Reading Attitude Scale, a Transfer Test and an interview about strategy use during reading. The data of the Reading Strategy Test, the Transfer Test and the interviews about strategy use showed that the experimental group out-performed the control group in terms of the strategy adoption and application during text reading. Whilst the experimental group also scored higher on the Reading Comprehension Test than the control group, the difference was not significant. This design experiment shows that it is possible to foster pupils' use and transfer of strategic reading comprehension skills in regular classrooms by immersing them in a powerful learning environment. But this intervention does not automatically result in improvement of performance on a standardised reading comprehension test.

3d-4f {Co(II)3Ln(OR)4} Cubanes as Bio-Inspired Water Oxidation Catalysts.

PubMed

Evangelisti, Fabio; Moré, René; Hodel, Florian; Luber, Sandra; Patzke, Greta Ricarda

2015-09-02

Although the {CaMn4O5} oxygen evolving complex (OEC) of photosystem II is a major paradigm for water oxidation catalyst (WOC) development, the comprehensive translation of its key features into active molecular WOCs remains challenging. The [Co(II)3Ln(hmp)4(OAc)5H2O] ({Co(II)3Ln(OR)4}; Ln = Ho-Yb, hmp = 2-(hydroxymethyl)pyridine) cubane WOC series is introduced as a new springboard to address crucial design parameters, ranging from nuclearity and redox-inactive promoters to operational stability and ligand exchange properties. The {Co(II)3Ln(OR)4} cubanes promote bioinspired WOC design by newly combining Ln(3+) centers as redox-inactive Ca(2+) analogues with flexible aqua-/acetate ligands into active and stable WOCs (max. TON/TOF values of 211/9 s(-1)). Furthermore, they open up the important family of 3d-4f complexes for photocatalytic applications. The stability of the {Co(II)3Ln(OR)4} WOCs under photocatalytic conditions is demonstrated with a comprehensive analytical strategy including trace metal analyses and solution-based X-ray absorption spectroscopy (XAS) investigations. The productive influence of the Ln(3+) centers is linked to favorable ligand mobility, and the experimental trends are substantiated with Born-Oppenheimer molecular dynamics studies.

Physical Characteristics of Medical Textile Prostheses Designed for Hernia Repair: A Comprehensive Analysis of Select Commercial Devices

PubMed Central

Miao, Linli; Wang, Fang; Wang, Lu; Zou, Ting; Brochu, Gaétan; Guidoin, Robert

2015-01-01

Inguinal hernia repairs are among the most frequent operations performed worldwide. This study aims to provide further understanding of structural characteristics of hernia prostheses, and better comprehensive evaluation. Weight, porosity, pore size and other physical characteristics were evaluated; warp knitting structures were thoroughly discussed. Two methods referring to ISO 7198:1998, i.e., weight method and area method, were employed to calculate porosity. Porosity ranged from 37.3% to 69.7% measured by the area method, and 81.1% to 89.6% by the weight method. Devices with two-guide bar structures displayed both higher porosity (57.7%–69.7%) and effective porosity (30.8%–60.1%) than single-guide bar structure (37.3%–62.4% and 0%–5.9%, respectively). Filament diameter, stitch density and loop structure combined determined the thickness, weight and characteristics of pores. They must be well designed to avoid zero effective porosity regarding a single-bar structure. The area method was more effective in characterizing flat sheet meshes while the weight method was perhaps more accurate in describing stereoscopic void space for 3D structure devices. This article will give instructive clues for engineers to improve mesh structures, and better understanding of warp knitting meshes for surgeons. PMID:28793704

CPMs: A Kinesthetic Comprehension Strategy

ERIC Educational Resources Information Center

Block, Cathy Collins; Parris, Sheri R.; Whiteley, Cinnamon S.

2008-01-01

This article discusses a study to determine whether primary grade students can learn comprehension processes via hand motions to portray these mental processes. Comprehension Process Motions (CPMs) were designed to provide students with a way to make abstract comprehension processes more consciously accessible and also to give teachers a way to…

Development of Comprehension Monitoring in Beginner Readers

ERIC Educational Resources Information Center

Yeomans-Maldonado, Gloria

2017-01-01

The current study was designed to understand the development of comprehension monitoring among beginner readers from first to third grade, and to determine the extent to which first graders' comprehension monitoring predicts reading comprehension in grade three. Participants were 113 children (57% female) from four US states who were followed from…

Intellectual Production Supervision Perform based on RFID Smart Electricity Meter

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

This topic develops the RFID intelligent electricity meter production supervision project management system. The system is designed for energy meter production supervision in the management of the project schedule, quality and cost information management requirements in RFID intelligent power, and provide quantitative information more comprehensive, timely and accurate for supervision engineer and project manager management decisions, and to provide technical information for the product manufacturing stage file. From the angle of scheme analysis, design, implementation and test, the system development of production supervision project management system for RFID smart meter project is discussed. Focus on the development of the system, combined with the main business application and management mode at this stage, focuses on the energy meter to monitor progress information, quality information and cost based information on RFID intelligent power management function. The paper introduces the design scheme of the system, the overall client / server architecture, client oriented graphical user interface universal, complete the supervision of project management and interactive transaction information display, the server system of realizing the main program. The system is programmed with C# language and.NET operating environment, and the client and server platforms use Windows operating system, and the database server software uses Oracle. The overall platform supports mainstream information and standards and has good scalability.

Environmental Testing and Thermal Analysis of the NPS Solar Cell Array Tester (NPS-SCAT) CubeSat

DTIC Science & Technology

2011-06-01

BCR Battery Charge Regulator C&DH Command and Data Handling CAD Computer Aided Design CDR Critical Design Review CFT Comprehensive Functional Test ...CPT Comprehensive Performance Test CoM Center of Mass COTS Commercial Off-the-Shelf CTB Cargo Transfer Bag EDU Engineering Design Unit EPS...and inexpensive solution. 2 C. ENVIRONMENTAL TESTING Environmental testing is an important element of the design and testing of a satellite. By

Global Space-Based Inter-Calibration System Reflective Solar Calibration Reference: From Aqua MODIS to S-NPP VIIRS

NASA Technical Reports Server (NTRS)

Xiong, Xiaoxiong; Angal, Amit; Butler, James; Cao, Changyong; Doelling, Daivd; Wu, Aisheng; Wu, Xiangqian

2016-01-01

The MODIS has successfully operated on-board the NASA's EOS Terra and Aqua spacecraft for more than 16 and 14 years, respectively. MODIS instrument was designed with stringent calibration requirements and comprehensive on-board calibration capability. In the reflective solar spectral region, Aqua MODIS has performed better than Terra MODIS and, therefore, has been chosen by the Global Space-based Inter-Calibration System (GSICS) operational community as the calibration reference sensor in cross-sensor calibration and calibration inter-comparisons. For the same reason, it has also been used by a number of earth observing sensors as their calibration reference. Considering that Aqua MODIS has already operated for nearly 14 years, it is essential to transfer its calibration to a follow-on reference sensor with a similar calibration capability and stable performance. The VIIRS is a follow-on instrument to MODIS and has many similar design features as MODIS, including their on-board calibrators (OBC). As a result, VIIRS is an ideal candidate to replace MODIS to serve as the future GSICS reference sensor. Since launch, the S-NPP VIIRS has already operated for more than 4 years and its overall performance has been extensively characterized and demonstrated to meet its overall design requirements. This paper provides an overview of Aqua MODIS and S-NPP VIIRS reflective solar bands (RSB) calibration methodologies and strategies, traceability, and their on-orbit performance. It describes and illustrates different methods and approaches that can be used to facilitate the calibration reference transfer, including the use of desert and Antarctic sites, deep convective clouds (DCC), and the lunar observations.

Using Kintsch's Discourse Comprehension Theory To Model the User's Coding of an Informative Message from an Enabling Information Retrieval System.

ERIC Educational Resources Information Center

Cole, Charles; Mandelblatt, Bertie

2000-01-01

Uses Kintsch's proposition-based construction-integration theory of discourse comprehension to detail the user coding operations that occur in each of the three subsystems (Perception, Comprehension, Application) in which users process an information retrieval systems (IRS) message. Describes an IRS device made up of two separate parts that enable…

Comprehensive integrated planning: A process for the Oak Ridge Reservation, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

The Oak Ridge Comprehensive Integrated Plan is intended to assist the US Department of Energy (DOE) and contractor personnel in implementing a comprehensive integrated planning process consistent with DOE Order 430.1, Life Cycle Asset Management and Oak Ridge Operations Order 430. DOE contractors are charged with developing and producing the Comprehensive Integrated Plan, which serves as a summary document, providing information from other planning efforts regarding vision statements, missions, contextual conditions, resources and facilities, decision processes, and stakeholder involvement. The Comprehensive Integrated Plan is a planning reference that identifies primary issues regarding major changes in land and facility use andmore » serves all programs and functions on-site as well as the Oak Ridge Operations Office and DOE Headquarters. The Oak Ridge Reservation is a valuable national resource and is managed on the basis of the principles of ecosystem management and sustainable development and how mission, economic, ecological, social, and cultural factors are used to guide land- and facility-use decisions. The long-term goals of the comprehensive integrated planning process, in priority order, are to support DOE critical missions and to stimulate the economy while maintaining a quality environment.« less

Development of the Functional Flow Block Diagram for the J-2X Rocket Engine System

NASA Technical Reports Server (NTRS)

White, Thomas; Stoller, Sandra L.; Greene, WIlliam D.; Christenson, Rick L.; Bowen, Barry C.

2007-01-01

The J-2X program calls for the upgrade of the Apollo-era Rocketdyne J-2 engine to higher power levels, using new materials and manufacturing techniques, and with more restrictive safety and reliability requirements than prior human-rated engines in NASA history. Such requirements demand a comprehensive systems engineering effort to ensure success. Pratt & Whitney Rocketdyne system engineers performed a functional analysis of the engine to establish the functional architecture. J-2X functions were captured in six major operational blocks. Each block was divided into sub-blocks or states. In each sub-block, functions necessary to perform each state were determined. A functional engine schematic consistent with the fidelity of the system model was defined for this analysis. The blocks, sub-blocks, and functions were sequentially numbered to differentiate the states in which the function were performed and to indicate the sequence of events. The Engine System was functionally partitioned, to provide separate and unique functional operators. Establishing unique functional operators as work output of the System Architecture process is novel in Liquid Propulsion Engine design. Each functional operator was described such that its unique functionality was identified. The decomposed functions were then allocated to the functional operators both of which were the inputs to the subsystem or component performance specifications. PWR also used a novel approach to identify and map the engine functional requirements to customer-specified functions. The final result was a comprehensive Functional Flow Block Diagram (FFBD) for the J-2X Engine System, decomposed to the component level and mapped to all functional requirements. This FFBD greatly facilitates component specification development, providing a well-defined trade space for functional trades at the subsystem and component level. It also provides a framework for function-based failure modes and effects analysis (FMEA), and a rigorous baseline for the functional architecture.

Crew factors in flight operations II : psychophysiological responses to short-haul air transport operations

DOT National Transportation Integrated Search

1994-11-01

This report is the second in a series on the physiological and psychological effects of flight operations on flight crews, and on the operational significance of these effects. This overview presents a comprehensive review and interpretation of the m...

Revitalising primary healthcare requires an equitable global economic system - now more than ever.

PubMed

Sanders, David; Baum, Fran E; Benos, Alexis; Legge, David

2011-08-01

The promised revitalisation of primary healthcare (PHC) is happening at a time when the contradictions and unfairness of the global economic system have become clear, suggesting that the current system is unsustainable. In the past two decades, one of the most significant impediments to the implementation of comprehensive PHC has been neoliberal economic policies and their imposition globally. This article questions what will be required for PHC to flourish. PHC incorporates five key principles: equitable provision of services, comprehensive care, intersectoral action, community involvement and appropriate technology. This article considers intersectoral action and comprehensiveness and their potential to be implemented in the current global environment. It highlights the constraints to intersectoral action through a case study of nutrition in the context of globalisation of the food chain. It also explores the challenges to implementing a comprehensive approach to health that are posed by neoliberal health sector reforms and donor practices. The paper concludes that even well-designed health systems based on PHC have little influence over the broader economic forces that shape their operation and their ability to improve health. Reforming these economic forces will require greater regulation of the national and global economic environment to emphasise people's health rather than private profit, and action to address climate change. Revitalisation of PHC and progress towards health equity are unlikely without strong regulation of the market. The further development and strengthening of social movements for health will be key to successful advocacy action.

Coordinated Freeway and Arterial Operations Handbook

DOT National Transportation Integrated Search

2006-05-01

Managing and operating freeways and adjacent arterials in a proactive and comprehensive manner, from a system user's perspective, is a major step toward operating all modes of the transportation system at maximum efficiency. The focus of this guide i...

Training and Certification of Water Utility Operators in Michigan--1925 to 1978.

ERIC Educational Resources Information Center

Sacks, Richard; Brown, Elgar

1978-01-01

Outlined are the training and certification programs for individuals who operate treatment plants and distribution systems. The commitment to a comprehensive yet flexible program to respond to operator needs is stressed. (CS)

Helicopter theory

NASA Technical Reports Server (NTRS)

Johnson, W.

1980-01-01

A comprehensive presentation is made of the engineering analysis methods used in the design, development and evaluation of helicopters. After an introduction covering the fundamentals of helicopter rotors, configuration and operation, rotary wing history, and the analytical notation used in the text, the following topics are discussed: (1) vertical flight, including momentum, blade element and vortex theories, induced power, vertical drag and ground effect; (2) forward flight, including in addition to momentum and vortex theory for this mode such phenomena as rotor flapping and its higher harmonics, tip loss and root cutout, compressibility and pitch-flap coupling; (3) hover and forward flight performance assessment; (4) helicopter rotor design; (5) rotary wing aerodynamics; (6) rotary wing structural dynamics, including flutter, flap-lag dynamics ground resonance and vibration and loads; (7) helicopter aeroelasticity; (8) stability and control (flying qualities); (9) stall; and (10) noise.

Development and status of data quality assurance program at NASA Langley research center: Toward national standards

NASA Technical Reports Server (NTRS)

Hemsch, Michael J.

1996-01-01

As part of a continuing effort to re-engineer the wind tunnel testing process, a comprehensive data quality assurance program is being established at NASA Langley Research Center (LaRC). The ultimate goal of the program is routing provision of tunnel-to-tunnel reproducibility with total uncertainty levels acceptable for test and evaluation of civilian transports. The operational elements for reaching such levels of reproducibility are: (1) statistical control, which provides long term measurement uncertainty predictability and a base for continuous improvement, (2) measurement uncertainty prediction, which provides test designs that can meet data quality expectations with the system's predictable variation, and (3) national standards, which provide a means for resolving tunnel-to-tunnel differences. The paper presents the LaRC design for the program and discusses the process of implementation.

Advanced optical delay line demonstrator

NASA Astrophysics Data System (ADS)

van den Dool, Teun; Kamphues, Fred; Fouss, B.; Henrioulle, K.; Hogenhuis, Harm

2004-09-01

TNO TPD, in cooperation with Micromega-Dynamics and Dutch Space, has designed an advanced Optical Delay Line (ODL) for use in future ground based and space interferometry missions. The work is performed under NIVR contract in preparation for GENIE and DARWIN. Using the ESO PRIMA DDL requirements as a baseline, the delay line can be used for PRIMA and GENIE without any modifications. The delay line design is modular and flexible, which makes scaling for other applications a relatively easy task. The ODL has a single linear motor actuator for Optical Path Difference (OPD) control, driving a two-mirror cat"s eye with SiC mirrors and CFRP structure. Magnetic bearings provide frictionless and wear free operation with zerohysteresis. The delay line is currently being assembled and will be subjected to a comprehensive test program in the second half of 2004.

A systematic review of readability and comprehension instruments used for print and web-based cancer information.

PubMed

Friedman, Daniela B; Hoffman-Goetz, Laurie

2006-06-01

Adequate functional literacy skills positively influence individuals' ability to take control of their health. Print and Web-based cancer information is often written at difficult reading levels. This systematic review evaluates readability instruments (FRE, F-K, Fog, SMOG, Fry) used to assess print and Web-based cancer information and word recognition and comprehension tests (Cloze, REALM, TOFHLA, WRAT) that measure people's health literacy. Articles on readability and comprehension instruments explicitly used for cancer information were assembled by searching MEDLINE and Psyc INFO from 1993 to 2003. In all, 23 studies were included; 16 on readability, 6 on comprehension, and 1 on readability and comprehension. Of the readability investigations, 14 focused on print materials, and 2 assessed Internet information. Comprehension and word recognition measures were not applied to Web-based information. None of the formulas were designed to determine the effects of visuals or design factors that could influence readability and comprehension of cancer education information.

Revisiting Sticht: The Changing Nature of the Relationship between Listening Comprehension and Reading Comprehension among Upper Elementary and Middle School Students over the Last 50 Years

ERIC Educational Resources Information Center

Verlaan, Wolfram; Pearce, Daniel L.; Zeng, Guang

2017-01-01

This study investigated the relationship between listening comprehension and reading comprehension to determine if environmental factors might be contributing to a possible change in the equalization age for these two comprehension modalities from what was theorized by Thomas Sticht. The study employed a counterbalanced design to measure the…

[Application of 3D virtual reality technology with multi-modality fusion in resection of glioma located in central sulcus region].

PubMed

Chen, T N; Yin, X T; Li, X G; Zhao, J; Wang, L; Mu, N; Ma, K; Huo, K; Liu, D; Gao, B Y; Feng, H; Li, F

2018-05-08

Objective: To explore the clinical and teaching application value of virtual reality technology in preoperative planning and intraoperative guide of glioma located in central sulcus region. Method: Ten patients with glioma in the central sulcus region were proposed to surgical treatment. The neuro-imaging data, including CT, CTA, DSA, MRI, fMRI were input to 3dgo sczhry workstation for image fusion and 3D reconstruction. Spatial relationships between the lesions and the surrounding structures on the virtual reality image were obtained. These images were applied to the operative approach design, operation process simulation, intraoperative auxiliary decision and the training of specialist physician. Results: Intraoperative founding of 10 patients were highly consistent with preoperative simulation with virtual reality technology. Preoperative 3D reconstruction virtual reality images improved the feasibility of operation planning and operation accuracy. This technology had not only shown the advantages for neurological function protection and lesion resection during surgery, but also improved the training efficiency and effectiveness of dedicated physician by turning the abstract comprehension to virtual reality. Conclusion: Image fusion and 3D reconstruction based virtual reality technology in glioma resection is helpful for formulating the operation plan, improving the operation safety, increasing the total resection rate, and facilitating the teaching and training of the specialist physician.

Physics and engineering design of the accelerator and electron dump for SPIDER

NASA Astrophysics Data System (ADS)

Agostinetti, P.; Antoni, V.; Cavenago, M.; Chitarin, G.; Marconato, N.; Marcuzzi, D.; Pilan, N.; Serianni, G.; Sonato, P.; Veltri, P.; Zaccaria, P.

2011-06-01

The ITER Neutral Beam Test Facility (PRIMA) is planned to be built at Consorzio RFX (Padova, Italy). PRIMA includes two experimental devices: a full size ion source with low voltage extraction called SPIDER and a full size neutral beam injector at full beam power called MITICA. SPIDER is the first experimental device to be built and operated, aiming at testing the extraction of a negative ion beam (made of H- and in a later stage D- ions) from an ITER size ion source. The main requirements of this experiment are a H-/D- extracted current density larger than 355/285 A m-2, an energy of 100 keV and a pulse duration of up to 3600 s. Several analytical and numerical codes have been used for the design optimization process, some of which are commercial codes, while some others were developed ad hoc. The codes are used to simulate the electrical fields (SLACCAD, BYPO, OPERA), the magnetic fields (OPERA, ANSYS, COMSOL, PERMAG), the beam aiming (OPERA, IRES), the pressure inside the accelerator (CONDUCT, STRIP), the stripping reactions and transmitted/dumped power (EAMCC), the operating temperature, stress and deformations (ALIGN, ANSYS) and the heat loads on the electron dump (ED) (EDAC, BACKSCAT). An integrated approach, taking into consideration at the same time physics and engineering aspects, has been adopted all along the design process. Particular care has been taken in investigating the many interactions between physics and engineering aspects of the experiment. According to the 'robust design' philosophy, a comprehensive set of sensitivity analyses was performed, in order to investigate the influence of the design choices on the most relevant operating parameters. The design of the SPIDER accelerator, here described, has been developed in order to satisfy with reasonable margin all the requirements given by ITER, from the physics and engineering points of view. In particular, a new approach to the compensation of unwanted beam deflections inside the accelerator and a new concept for the ED have been introduced.

Identification and evaluation of fluvial-dominated deltaic (Class I oil) reservoirs in Oklahoma. Quarterly technical progress report, July 1--September 30, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mankin, C.J.; Banken, M.K.

The Oklahoma Geological Survey (OGS), the Geo Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaged in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional origins; collect, organize and analyze all available data conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs. Activities were focused primarily on technology transfer elements of the project. This included regional play analysis and mapping, geologic field studies, and reservoir modeling for secondary water flood simulations as used in publication folios and workshops. The computer laboratory was fully operational for operator use. Computer systems design and database development activities were ongoing.« less

Tracking blood products in blood centres using radio frequency identification: a comprehensive assessment.

PubMed

Davis, Rodeina; Geiger, Bradley; Gutierrez, Alfonso; Heaser, Julie; Veeramani, Dharmaraj

2009-07-01

Radio frequency identification (RFID) can be a key enabler for enhancing productivity and safety of the blood product supply chain. This article describes a systematic approach developed by the RFID Blood Consortium for a comprehensive feasibility and impact assessment of RFID application in blood centre operations. Our comprehensive assessment approach incorporates process-orientated and technological perspectives as well as impact analysis. Assessment of RFID-enabled process redesign is based on generic core processes derived from the three participating blood centres. The technological assessment includes RFID tag readability and performance evaluation, testing of temperature and biological effects of RF energy on blood products, and RFID system architecture design and standards. The scope of this article is limited to blood centre processes (from donation to manufacturing/distribution) for selected mainstream blood products (red blood cells and platelets). Radio frequency identification can help overcome a number of common challenges and process inefficiencies associated with identification and tracking of blood products. High frequency-based RFID technology performs adequately and safely for red blood cell and platelet products. Productivity and quality improvements in RFID-enabled blood centre processes can recoup investment cost in a 4-year payback period. Radio frequency identification application has significant process-orientated and technological implications. It is feasible and economically justifiable to incorporate RFID into blood centre processes.

Comparison of various second-dimension gradient types in comprehensive two-dimensional liquid chromatography.

PubMed

Jandera, Pavel; Hájek, Tomás; Cesla, Petr

2010-06-01

Gradient elution provides significant improvement in peak capacity with respect to isocratic conditions. In the second dimension, gradients are limited to a short-time period available for separation. Various types of second-dimension gradients in comprehensive LC x LC are compared: (i) "full in fraction", (ii) "segment in fraction" and (iii) "continuously shifting" gradients, applied in orthogonal LC x LC separations of phenolic acids and flavones on a polyethylene glycol column in the first dimension and two types of porous shell fused-core C18 columns in the second dimension (Ascentis Express and Kinetex). The porous shell columns provide narrow bandwidths and fast second-dimension separations at moderate operating pressure that allows important savings of the overall separation time in comprehensive LC x LC separations. The effects of the gradient type on the bandwidths, theoretical peak capacity, separation time and column pressure in the second dimension were investigated. The type of gradient program controls the range of lipophilicity of sample compounds that can be separated in the second-dimension reversed-phase time period. This range can be calibrated using alkylbenzene standards, to design the separation conditions for complete sample separation, avoiding harmful wrap around of non-eluted compounds to the subsequent second-dimension fractions.

Comprehensive Study of the Flow Control Strategy in a Wirelessly Charged Centrifugal Microfluidic Platform with Two Rotation Axes.

PubMed

Zhu, Yunzeng; Chen, Yiqi; Meng, Xiangrui; Wang, Jing; Lu, Ying; Xu, Youchun; Cheng, Jing

2017-09-05

Centrifugal microfluidics has been widely applied in the sample-in-answer-out systems for the analyses of nucleic acids, proteins, and small molecules. However, the inherent characteristic of unidirectional fluid propulsion limits the flexibility of these fluidic chips. Providing an extra degree of freedom to allow the unconstrained and reversible pumping of liquid is an effective strategy to address this limitation. In this study, a wirelessly charged centrifugal microfluidic platform with two rotation axes has been constructed and the flow control strategy in such platform with two degrees of freedom was comprehensively studied for the first time. Inductively coupled coils are installed on the platform to achieve wireless power transfer to the spinning stage. A micro servo motor is mounted on both sides of the stage to alter the orientation of the device around a secondary rotation axis on demand during stage rotation. The basic liquid operations on this platform, including directional transport of liquid, valving, metering, and mixing, are comprehensively studied and realized. Finally, a chip for the simultaneous determination of hexavalent chromium [Cr(VI)] and methanal in water samples is designed and tested based on the strategy presented in this paper, demonstrating the potential use of this platform for on-site environmental monitoring, food safety testing, and other life science applications.

Listening Comprehension: Approach, Design, Procedure.

ERIC Educational Resources Information Center

Richards, Jack C.

1983-01-01

Three dimensions in the teaching of listening comprehension are outlined: (1) a theory is presented that takes account of the cognitive processes used (approach); (2) listeners' needs are analyzed and a taxonomy of microskills and objectives for teaching them are proposed (design); and (3) classroom exercises and activities are suggested…

Apollo experience report: Command and service module environmental control system

NASA Technical Reports Server (NTRS)

Samonski, F. H., Jr.; Tucker, E. M.

1972-01-01

A comprehensive review is presented of the design philosophy of the Apollo environmental control system together with the development history of the total system and of selected components within the system. In particular, discussions are presented relative to the development history and to the problems associated with the equipment cooling coldplates, the evaporator and its electronic control system, and the space radiator system used for rejection of the spacecraft thermal loads. Apollo flight experience and operational difficulties associated with the spacecraft water system and the waste management system are discussed in detail to provide definition of the problem and the corrective action taken when applicable.

Superfund Record of Decision (EPA Region 7): Cornhusker Army Ammunition Plant, Operable Unit 2, Hall County, NE, September 30, 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-03-01

This Record of Decision (ROD) document presents the selected remedial action for the six areas of concern (AOCs) located at the Cornhusker Army Ammunition Plant (CHAAP) in Grand Island, Nebraska designated as OU2. The remedial action is chosen in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERLCA), as amended by the Superfund Amendments and Reauthorization Act (SARA) of 1986, and with the National Oil and Hazardous Substances Pollution Contingency Plan (NCP). The information supporting the decisions contained in the remedy is contained in the administrative record.

Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

Doyle, Monica; ONeil, Daniel A.; Christensen, Carissa B.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS) is a decision support tool designed to aid program managers and strategic planners in determining how to invest technology research and development dollars. It is an Excel-based modeling package that allows a user to build complex space architectures and evaluate the impact of various technology choices. ATLAS contains system models, cost and operations models, a campaign timeline and a centralized technology database. Technology data for all system models is drawn from a common database, the ATLAS Technology Tool Box (TTB). The TTB provides a comprehensive, architecture-independent technology database that is keyed to current and future timeframes.

Progress on the Multiphysics Capabilities of the Parallel Electromagnetic ACE3P Simulation Suite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kononenko, Oleksiy

2015-03-26

ACE3P is a 3D parallel simulation suite that is being developed at SLAC National Accelerator Laboratory. Effectively utilizing supercomputer resources, ACE3P has become a key tool for the coupled electromagnetic, thermal and mechanical research and design of particle accelerators. Based on the existing finite-element infrastructure, a massively parallel eigensolver is developed for modal analysis of mechanical structures. It complements a set of the multiphysics tools in ACE3P and, in particular, can be used for the comprehensive study of microphonics in accelerating cavities ensuring the operational reliability of a particle accelerator.

SDIO Producibility and Manufacturing Intelligent Processing Programs

NASA Technical Reports Server (NTRS)

Stottlemyer, Greg

1992-01-01

SDIO has to fashion a comprehensive strategy to insert the capability of an industrial base into ongoing design tradeoffs. This means that there is not only a need to determine if something can be made to the precision needed to meet system performance, but also what changes need to be made in that industry sector to develop a deterministic approach to fabrication precision components. Developing and introducing advanced production and quality control systems is part of this success. To address this situation, SDIO has developed the MODIL (Manufacturing Operations Development and Integration Labs) program. MODILs were developed into three areas: Survivable Optics, Electronics and Sensors, and Spacecraft Fabrication and Test.

TROPIX Power System Architecture

NASA Technical Reports Server (NTRS)

Manner, David B.; Hickman, J. Mark

1995-01-01

This document contains results obtained in the process of performing a power system definition study of the TROPIX power management and distribution system (PMAD). Requirements derived from the PMADs interaction with other spacecraft systems are discussed first. Since the design is dependent on the performance of the photovoltaics, there is a comprehensive discussion of the appropriate models for cells and arrays. A trade study of the array operating voltage and its effect on array bus mass is also presented. A system architecture is developed which makes use of a combination of high efficiency switching power convertors and analog regulators. Mass and volume estimates are presented for all subsystems.

Automation: the competitive edge for HMOs and other alternative delivery systems.

PubMed

Prussin, J A

1987-12-01

Until recently, many, if not most, Health Maintenance Organizations (HMO) were not automated. Moreover, HMOs that were automated tended to be automated only on a limited basis. Recently, however, the highly competitive marketplace within which HMOs and other Alternative Delivery Systems (ADS) exist has required that they operate at a maximum effectiveness and efficiency. Given the complex nature of ADSs, the volume of transactions in ADSs, the large number of members served by ADSs, and the numerous providers who are paid at different rates and on different bases by ADSs, it is impossible for an ADS to operate effectively or efficiently, let alone show optimal performance, without a sophisticated, comprehensive automated system. Reliable automated systems designed specifically to address ADS functions such as enrollment and premium billing, finance and accounting, medical information and patient management, and marketing have recently become available at a reasonable cost.

PCF-Based Cavity Enhanced Spectroscopic Sensors for Simultaneous Multicomponent Trace Gas Analysis

PubMed Central

Nakaema, Walter M.; Hao, Zuo-Qiang; Rohwetter, Philipp; Wöste, Ludger; Stelmaszczyk, Kamil

2011-01-01

A multiwavelength, multicomponent CRDS gas sensor operating on the basis of a compact photonic crystal fibre supercontinuum light source has been constructed. It features a simple design encompassing one radiation source, one cavity and one detection unit (a spectrograph with a fitted ICCD camera) that are common for all wavelengths. Multicomponent detection capability of the device is demonstrated by simultaneous measurements of the absorption spectra of molecular oxygen (spin-forbidden b-X branch) and water vapor (polyads 4v, 4v + δ) in ambient atmospheric air. Issues related to multimodal cavity excitation, as well as to obtaining the best signal-to-noise ratio are discussed together with methods for their practical resolution based on operating the cavity in a “quasi continuum” mode and setting long camera gate widths, respectively. A comprehensive review of multiwavelength CRDS techniques is also given. PMID:22319372

Structures, performance, benefit, cost study. [gas turbine engines

NASA Technical Reports Server (NTRS)

Feder, E.

1981-01-01

Aircraft engine structures were studied to identify the advanced structural technologies that would provide the most benefits to future aircraft operations. A series of studies identified engine systems with the greatest potential for improvements. Based on these studies, six advanced generic structural concepts were selected and conceptually designed. The benefits of each concept were quantitatively assessed in terms of thrust specific fuel consumption, weight, cost, maintenance cost, fuel burned and direct operating cost plus interest. The probability of success of each concept was also determined. The concepts were ranked and the three most promising were selected for further study which consisted of identifying and comprehensively outlining the advanced technologies required to develop these concepts for aircraft engine application. Analytic, fabrication, and test technology developments are required. The technology programs outlined emphasize the need to provide basic, fundamental understanding of technology to obtain the benefit goals.

Recovery of agricultural nutrients from biorefineries.

PubMed

Carey, Daniel E; Yang, Yu; McNamara, Patrick J; Mayer, Brooke K

2016-09-01

This review lays the foundation for why nutrient recovery must be a key consideration in design and operation of biorefineries and comprehensively reviews technologies that can be used to recover an array of nitrogen, phosphorus, and/or potassium-rich products of relevance to agricultural applications. Recovery of these products using combinations of physical, chemical, and biological operations will promote sustainability at biorefineries by converting low-value biomass (particularly waste material) into a portfolio of higher-value products. These products can include a natural partnering of traditional biorefinery outputs such as biofuels and chemicals together with nutrient-rich fertilizers. Nutrient recovery not only adds an additional marketable biorefinery product, but also avoids the negative consequences of eutrophication, and helps to close anthropogenic nutrient cycles, thereby providing an alternative to current unsustainable approaches to fertilizer production, which are energy-intensive and reliant on nonrenewable natural resource extraction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated function nonimaging concentrating collector tubes for solar thermal energy

NASA Astrophysics Data System (ADS)

Winston, R.; Ogallagher, J. J.

1982-09-01

A substantial improvement in optical efficiency over contemporary external reflector evacuated tube collectors has been achieved by integrating the reflector surface into the outer glass envelope. Described are the design fabrication and test results for a prototype collector based on this concept. A comprehensive test program to measure performance and operational characteristics of a 2 sq m panel (45 tubes) has been completed. Efficiencies above 50% relative to beam at 200 C have been repeatedly demonstrated. Both the instantaneous and long term average performance of this totally stationary solar collector are comparable to those for tracking line focus parabolic troughs. The yield, reliability and stability of performance achieved have been excellent. Subcomponent assemblies and fabrication procedures have been used which are expected to be compatible with high volume production. The collector has a wide variety of applications in the 100 to 300 C range including industrial progress heat, air conditioning and Rankine engine operation.

Cryogenic Insulation Systems

NASA Technical Reports Server (NTRS)

Augustynowicz, S. D.; Fesmire, J. E.; Wikstrom, J. P.

1999-01-01

The results of a comparative study of cryogenic insulation systems performed are presented. The key aspects of thermal insulation relative to cryogenic system design, testing, manufacturing, and maintenance are discussed. An overview of insulation development from an energy conservation perspective is given. Conventional insulation materials for cryogenic applications provide three levels of thermal conductivity. Actual thermal performance of standard multilayer insulation (MLI) is several times less than laboratory performance and often 10 times worse than ideal performance. The cost-effectiveness of the insulation system depends on thermal performance; flexibility and durability; ease of use in handling, installation, and maintenance; and overall cost including operations, maintenance, and life cycle. Results of comprehensive testing of both conventional and novel materials such as aerogel composites using cryostat boil-off methods are given. The development of efficient, robust cryogenic insulation systems that operate at a soft vacuum level is the primary focus of this paper.

Comprehensive experimental and numerical analysis of instability phenomena in pump turbines

NASA Astrophysics Data System (ADS)

Gentner, Ch; Sallaberger, M.; Widmer, Ch; Bobach, B.-J.; Jaberg, H.; Schiffer, J.; Senn, F.; Guggenberger, M.

2014-03-01

The changes in the electricity market have led to changed requirements for the operation of pump turbines. Utilities need to change fast and frequently between pumping and generating modes and increasingly want to operate at off-design conditions for extended periods. Operation of the units in instable areas of the machine characteristic is not acceptable and may lead to self-excited vibration of the hydraulic system. In turbine operation of pump turbines unstable behaviour can occur at low load off-design operation close to runaway conditions (S-shape of the turbine characteristic). This type of instability may impede the synchronization of the machine in turbine mode and thus increase start-up and switch over times. A pronounced S-shaped instability can also lead to significant drop of discharge in the event of load rejection. Low pressure on the suction side and in the tail-race tunnel could cause dangerous separation of the water column. Understanding the flow features that lead to the instable behaviour of pump turbines is a prerequisite to the design of machines that can fulfil the growing requirements relating to operational flexibility. Flow simulation in these instability zones is demanding due to the complex and highly unsteady flow patterns. Only unsteady simulation methods are able to reproduce the governing physical effects in these operating regions. ANDRITZ HYDRO has been investigating the stability behaviour of pump turbines in turbine operation in cooperation with several universities using simulation and measurements. In order to validate the results of flow simulation of unstable operating points, the Graz University of Technology (Austria) performed detailed experimental investigations. Within the scope of a long term research project, the operating characteristics of several pump turbine runners have been measured and flow patterns in the pump turbine at speed no load and runaway have been examined by 2D Laser particle image velocimetry (PIV). For several wicket gate positions, the flow fields in the vane-less space at runner inlet observed in the experiment are compared with the results of unsteady CFD flow simulations. Physical phenomena are visualized and insight to flow phenomena is given. Analyses using both results of simulation and measurement allow deriving a consistent explanation of the fluid mechanical mechanisms leading to the S-shaped instability of pump turbines.

Abbreviations: Their Effects on Comprehension of Classified Advertisements.

ERIC Educational Resources Information Center

Sokol, Kirstin R.

Two experimental designs were used to test the hypothesis that abbreviations in classified advertisements decrease the reader's comprehension of such ads. In the first experimental design, 73 high school students read four ads (for employment, used cars, apartments for rent, and articles for sale) either with abbreviations or with all…

Deriving Empirically-Based Design Guidelines for Advanced Learning Technologies that Foster Disciplinary Comprehension

ERIC Educational Resources Information Center

Poitras, Eric; Trevors, Gregory

2012-01-01

Planning, conducting, and reporting leading-edge research requires professionals who are capable of highly skilled reading. This study reports the development of an empirically informed computer-based learning environment designed to foster the acquisition of reading comprehension strategies that mediate expertise in the social sciences. Empirical…

77 FR 28891 - National Flood Insurance Program Programmatic Environmental Impact Statement

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... critical habitat. This effort will result in a comprehensive series of policy recommendations designed to transition the NFIP toward a more resilient, sustainable, and comprehensive approach to flood risk management... insurance is designed to provide a financial alternative and to reduce the escalating costs of Federal...

Design and Development of the Aircraft Instrument Comprehension Program.

ERIC Educational Resources Information Center

Higgins, Norman C.

The Aircraft Instrument Comprehension (AIC) Program is a self-instructional program designed to teach undergraduate student pilots to read instruments that indicate the position of the aircraft in flight, based on sequential instructional stages of information, prompted practice, and unprompted practice. The program includes a 36-item multiple…

Computer Program for Analysis, Design and Optimization of Propulsion, Dynamics, and Kinematics of Multistage Rockets

NASA Astrophysics Data System (ADS)

Lali, Mehdi

2009-03-01

A comprehensive computer program is designed in MATLAB to analyze, design and optimize the propulsion, dynamics, thermodynamics, and kinematics of any serial multi-staging rocket for a set of given data. The program is quite user-friendly. It comprises two main sections: "analysis and design" and "optimization." Each section has a GUI (Graphical User Interface) in which the rocket's data are entered by the user and by which the program is run. The first section analyzes the performance of the rocket that is previously devised by the user. Numerous plots and subplots are provided to display the performance of the rocket. The second section of the program finds the "optimum trajectory" via billions of iterations and computations which are done through sophisticated algorithms using numerical methods and incremental integrations. Innovative techniques are applied to calculate the optimal parameters for the engine and designing the "optimal pitch program." This computer program is stand-alone in such a way that it calculates almost every design parameter in regards to rocket propulsion and dynamics. It is meant to be used for actual launch operations as well as educational and research purposes.

Dissociating retrieval interference and reanalysis in the P600 during sentence comprehension.

PubMed

Tanner, Darren; Grey, Sarah; van Hell, Janet G

2017-02-01

We investigated the relative independence of two key processes in language comprehension, as reflected in the P600 ERP component. Numerous studies have linked the P600 to sentence- or message-level reanalysis; however, much research has shown that skilled, cue-based memory retrieval operations are also important to successful language processing. Our goal was to identify whether these cue-based retrieval operations are part of the reanalysis processes indexed by the P600. To this end, participants read sentences that were either grammatical or ungrammatical via subject-verb agreement violations, and in which there was either no possibility for retrieval interference or there was an attractor noun interfering with the computation of subject-verb agreement (e.g., "The slogan on the political poster(s) was/were …"). A stimulus onset asynchrony manipulation (fast, medium, or slow presentation rate) was designed to modulate participants' ability to engage in reanalysis processes. Results showed a reliable attraction interference effect, indexed by reduced behavioral sensitivity to ungrammaticalities and P600 amplitudes when there was an opportunity for retrieval interference, as well as an effect of presentation rate, with reduced behavioral sensitivity and smaller P600 effects at faster presentation rates. Importantly, there was no interaction between the two, suggesting that retrieval interference and sentence-level reanalysis processes indexed by the P600 can be neurocognitively distinct processes. © 2016 Society for Psychophysiological Research.

Different Aspects of General Anesthesia in Pediatric Dentistry: A Review.

PubMed

Ramazani, Nahid

2016-04-01

Most child population is able to undergo dental treatment in the conventional setting. However, some children fail to cope with in-office conscious state and cannot respond to usual management modalities. This review aims to discuss the topic further. A computerized search in databases PubMed, MEDLINE, EMBASE, Google Scholar and Google were performed using dental general anesthesia related keywords. Original and review English-written articles that were limited to child population were retrieved without any limitation of publication date. The suitable papers were selected and carefully studied. A data form designed by author was used to write relevant findings. Preoperative oral examination and comprehensive evaluation of treatment needs is only possible after clinical and radiographic oral examination. Effective collaboration in dental GA team should be made to minimize psychological trauma of children who undergo dental GA. Before conducting comprehensive dental treatment under GA, the general health of the child and the success rate of procedures provided needs to be accurately evaluated. It is noteworthy that determination of the optimal timing for GA dental operation is of great importance. Providing safety with pediatric dental rehabilitation under GA is critical. Besides criteria for case selection of dental GA, some degree of dental practitioner's judgment is required to make decision. Pre- and post-operative instructions to parents or caregiver decrease the risk of complications. However, trained resuscitation providers, careful monitoring and advanced equipment minimize adverse outcomes.

Phonological working memory and reading in students with dyslexia

PubMed Central

de Carvalho, Carolina A. F.; Kida, Adriana de S. B.; Capellini, Simone A.; de Avila, Clara R. B.

2014-01-01

Purpose: To investigate parameters related to fluency, reading comprehension and phonological processing (operational and short-term memory) and identify potential correlation between the variables in Dyslexia and in the absence of reading difficulties. Method: One hundred and fifteen students from the third to eighth grade of elementary school were grouped into a Control Group (CG) and Group with Dyslexia (GDys). Reading of words, pseudowords and text (decoding); listening and reading comprehension; phonological short-term and working memory (repetition of pseudowords and Digit Span) were evaluated. Results: The comparison of the groups showed significant differences in decoding, phonological short-term memory (repetition of pseudowords) and answers to text-connecting questions (TC) on reading comprehension, with the worst performances identified for GDys. In this group there were negative correlations between pseudowords repetition and TC answers and total score, both on listening comprehension. No correlations were found between operational and short-term memory (Digit Span) and parameters of fluency and reading comprehension in dyslexia. For the sample without complaint, there were positive correlations between some parameters of reading fluency and repetition of pseudowords and also between answering literal questions in listening comprehension and repetition of digits on the direct and reverse order. There was no correlation with the parameters of reading comprehension. Conclusion: GDys and CG showed similar performance in listening comprehension and in understanding of explicit information and gap-filling inference on reading comprehension. Students of GDys showed worst performance in reading decoding, phonological short-term memory (pseudowords) and on inferences that depends on textual cohesion understanding in reading. There were negative correlations between pseudowords repetition and TC answers and total score, both in listening comprehension. PMID:25101021

Operating manual for the High Flux Isotope Reactor. Volume I. Description of the facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-09-01

This volume contains a comprehensive description of the High Flux Isotope Reactor Facility. Its primary purpose is to supplement the detailed operating procedures, providing the reactor operators with background information on the various HFIR systems. The detailed operating procdures are presented in another report.

Building Comprehensive Career Guidance Programs for Secondary Schools: A Handbook of Programs, Practices, and Models. Research and Development Series No. 147.

ERIC Educational Resources Information Center

Campbell, Robert E.; And Others

This handbook presents management techniques, program ideas, and student activities for building comprehensive secondary career guidance programs. Part 1 (chapter 1) traces the history of guidance to set the stage for the current emphasis on comprehensive programs, summarizes four representative models for designing comprehensive programs, and…

Behavioral Health and Performance Operations at the NASA Johnson Space Center: A Comprehensive Program that Addresses Flight and Spaceflight Duty Adaptability

NASA Technical Reports Server (NTRS)

Beven, G. E.

2017-01-01

NASA astronauts on active status require medical certification for aircraft flying duties as well as readiness for long duration spaceflight training, launch to the International Space Station (ISS), and mission continuation during spaceflight operations. Behavioral fitness and adaptability is an inherent component of medical certification at NASA and requires a unique approach that spans the professional life-span of all active astronauts. TOPIC: This presentation will address the Behavioral Health and Performance (BHP) operations program at the Johnson Space Center. Components of BHP operations include astronaut selection, as well as annual, elective, preflight, inflight, and postflight BHP assessments. Each aspect of the BHP operations program will be discussed, with a focus on behavioral fitness determination and resultant outcomes. Specifically, astronaut selection generates a rating of suitability for long duration spaceflight as well as psychiatric qualification; annual, preflight and postflight BHP assessments provoke a decision regarding the presence of any aeromedical concerns; and inflight assessment requires a conclusion pertaining to mission impact. The combination of these elements provide for a unique, comprehensive approach to flight and spaceflight adaptability. APPLICATIONS: Attendees will understand the differing facets of NASA's comprehensive BHP operations program that occurs over the course of an astronaut's career and be able to compare and contrast this to the Adaptability Rating for Military Aviation (ARMA) and proposed models presented by others on this panel.

A human factors evaluation of Extravehicular Activity gloves

NASA Technical Reports Server (NTRS)

O'Hara, John M.; Briganti, Michael; Cleland, John; Winfield, Dan

1989-01-01

One of the major problems faced in Extravehicular Activity (EVA) glove development has been the absence of concise and reliable methods to measure the effects of EVA gloves on human-hand capabilities. NASA has sponsored a program to develop a standardized set of tests designed to assess EVA-gloved hand capabilities in six performance domains: Range of Motion, Strength, Tactile Perception, Dexterity, Fatigue, and Comfort. Based upon an assessment of general human-hand functioning and EVA task requirements, several tests within each performance domain were developed to provide a comprehensive evaluation. All tests were designed to be conducted in a glove box with the bare hand, an EVA glove without pressure, an EVA glove at operation pressure. Thus, the differential effect on performance of the glove with and without pressure was tested. Bare hand performance was used to 'calibrate' the effects. Ten subjects participated in the test setup as a repeated-measures experimental design. The paper will report the results of the test program.

[Research-oriented experimental course of plant cell and gene engineering for undergraduates].

PubMed

Xiaofei, Lin; Rong, Zheng; Morigen, Morigen

2015-04-01

Research-oriented comprehensive experimental course for undergraduates is an important part for their training of innovation. We established an optional course of plant cell and gene engineering for undergraduates using our research platform. The course is designed to study the cellular and molecular basis and experimental techniques for plant tissue culture, isolation and culture of protoplast, genetic transformation, and screening and identification of transgenic plants. To develop undergraduates' ability in experimental design and operation, and inspire their interest in scientific research and innovation consciousness, we integrated experimental teaching and practice in plant genetic engineering on the tissue, cellular, and molecular levels. Students in the course practiced an experimental teaching model featured by two-week teaching of principles, independent experimental design and bench work, and ready-to-access laboratory. In this paper, we describe the contents, methods, evaluation system and a few issues to be solved in this course, as well as the general application and significance of the research-oriented experimental course in reforming undergraduates' teaching and training innovative talents.

Definitive screening design enables optimization of LC-ESI-MS/MS parameters in proteomics.

PubMed

Aburaya, Shunsuke; Aoki, Wataru; Minakuchi, Hiroyoshi; Ueda, Mitsuyoshi

2017-12-01

In proteomics, more than 100,000 peptides are generated from the digestion of human cell lysates. Proteome samples have a broad dynamic range in protein abundance; therefore, it is critical to optimize various parameters of LC-ESI-MS/MS to comprehensively identify these peptides. However, there are many parameters for LC-ESI-MS/MS analysis. In this study, we applied definitive screening design to simultaneously optimize 14 parameters in the operation of monolithic capillary LC-ESI-MS/MS to increase the number of identified proteins and/or the average peak area of MS1. The simultaneous optimization enabled the determination of two-factor interactions between LC and MS. Finally, we found two parameter sets of monolithic capillary LC-ESI-MS/MS that increased the number of identified proteins by 8.1% or the average peak area of MS1 by 67%. The definitive screening design would be highly useful for high-throughput analysis of the best parameter set in LC-ESI-MS/MS systems.

An automated high throughput tribometer for adhesion, wear, and friction measurements

NASA Astrophysics Data System (ADS)

Kalihari, Vivek; Timpe, Shannon J.; McCarty, Lyle; Ninke, Matthew; Whitehead, Jim

2013-03-01

Understanding the origin and correlation of different surface properties under a multitude of operating conditions is critical in tribology. Diverse tribological properties and a lack of a single instrument to measure all make it difficult to compare and correlate properties, particularly in light of the wide range of interfaces commonly investigated. In the current work, a novel automated tribometer has been designed and validated, providing a unique experimental platform capable of high throughput adhesion, wear, kinetic friction, and static friction measurements. The innovative design aspects are discussed that allow for a variety of probes, sample surfaces, and testing conditions. Critical components of the instrument and their design criteria are described along with examples of data collection schemes. A case study is presented with multiple surface measurements performed on a set of characteristic substrates. Adhesion, wear, kinetic friction, and static friction are analyzed and compared across surfaces, highlighting the comprehensive nature of the surface data that can be generated using the automated high throughput tribometer.

13 CFR 303.7 - Requirements for Comprehensive Economic Development Strategies.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Economic Development Strategies. 303.7 Section 303.7 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE PLANNING INVESTMENTS AND COMPREHENSIVE ECONOMIC DEVELOPMENT STRATEGIES § 303.7 Requirements for Comprehensive Economic Development Strategies. (a) General. CEDS are designed...

The Development and Evaluation of a Reading Comprehension Strategy with Learning Disabled Students.

ERIC Educational Resources Information Center

Flaro, Lloyd

1987-01-01

Discusses a learning strategy, employing imaginal processes and verbal mediations procedures, designed to improve reading comprehension in 24 learning disabled students. Indicates significant gains and improvement in reading comprehension over a 15 week treatment period. (MM)

13 CFR 303.7 - Requirements for Comprehensive Economic Development Strategies.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Economic Development Strategies. 303.7 Section 303.7 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE PLANNING INVESTMENTS AND COMPREHENSIVE ECONOMIC DEVELOPMENT STRATEGIES § 303.7 Requirements for Comprehensive Economic Development Strategies. (a) General. CEDS are designed...

13 CFR 303.7 - Requirements for Comprehensive Economic Development Strategies.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Economic Development Strategies. 303.7 Section 303.7 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE PLANNING INVESTMENTS AND COMPREHENSIVE ECONOMIC DEVELOPMENT STRATEGIES § 303.7 Requirements for Comprehensive Economic Development Strategies. (a) General. CEDS are designed...

13 CFR 303.7 - Requirements for Comprehensive Economic Development Strategies.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Economic Development Strategies. 303.7 Section 303.7 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE PLANNING INVESTMENTS AND COMPREHENSIVE ECONOMIC DEVELOPMENT STRATEGIES § 303.7 Requirements for Comprehensive Economic Development Strategies. (a) General. CEDS are designed...

13 CFR 303.7 - Requirements for Comprehensive Economic Development Strategies.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Economic Development Strategies. 303.7 Section 303.7 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE PLANNING INVESTMENTS AND COMPREHENSIVE ECONOMIC DEVELOPMENT STRATEGIES § 303.7 Requirements for Comprehensive Economic Development Strategies. (a) General. CEDS are designed...

Breast cancer policy in Latin America: account of achievements and challenges in five countries.

PubMed

Nigenda, Gustavo; Gonzalez-Robledo, Maria Cecilia; Gonzalez-Robledo, Luz Maria; Bejarano-Arias, Rosa Maria

2016-07-12

The recent increase of breast cancer mortality has put on alert to most countries in the region. However it has taken some time before breast cancer could be considered as a relevant problem. Only in recent years breast cancer has been considered a priority in some Latin American countries and resources have been mobilized to confront the problem at the institutional level. The article analyzes the efforts made in five Latin American countries (Argentina, Brazil, Colombia, Mexico and Venezuela) in the last 15 years to design and implement policies to address the growing incidence of breast cancer. Data was collected between July and December 2010 from both primary and secondary sources. Semi-structured interviews were conducted with key informants from governmental and non-governmental organizations. Secondary data was obtained from publications in journals, government reports and official statistics in each country. Analysis combines information from both types of sources. Countries have followed different paths and are in different stages of policy implementation. In all cases early detection is a key strategy. Through the design of programs and guidelines, the allocation of financial resources to treat patients, as well as a formally structured information system, Brazil and Mexico have been able to set up comprehensive national policies. Argentina, Colombia and Venezuela have made important advancements but not yet capable of coordinating comprehensive national policies. Breast cancer is being considered a priority in all five countries but there are different stages in the rolling out of comprehensive national policies due to differences in their capacity to allocate resources, implement operational strategies and encourage the participation of relevant stakeholders.

DoD Comprehensive Military Unmanned Aerial Vehicle Smart Device Ground Control Station Threat Model

DTIC Science & Technology

2015-04-01

design , imple- mentation, and test evaluation were interviewed to evaluate the existing gaps in the DoD processes for cybersecurity. This group exposed...such as antenna design and signal reception have made satellite communication networks a viable solution for smart devices on the battlefield...DoD Comprehensive Military Unmanned AERIAL VEHICLE SMART DEVICE GROUND CONTROL STATION THREAT MODEL  Image designed by Diane Fleischer Report

Exploration of Configuration Options for a Large Civil Compound Helicopter

NASA Technical Reports Server (NTRS)

Russell, Carl; Johnson, Wayne

2013-01-01

Multiple compound helicopter configurations are designed using a combination of rotorcraft sizing and comprehensive analysis codes. Results from both the conceptual design phase and rotor comprehensive analysis are presented. The designs are evaluated for their suitability to a short-to-medium-haul civil transport mission carrying a payload of 90 passengers. Multiple metrics are used to determine the best configuration, with heavy emphasis placed on minimizing fuel burn.

Effectiveness of objectivist online instruction on graduate learners' knowledge and competence

NASA Astrophysics Data System (ADS)

Maryannakis, Artemios

Online courses currently offered by aeronautical institutions are unstructured conversions of traditional courses into Web-based courses that lack the learning theory and instructional design principles framework, thus lacking the efficiency and effectiveness in dealing with the academic demands required to prepare aviation/aerospace professionals for the challenges of the technologically driven twenty-first century. The purpose of this study was to compare the effectiveness of two versions of an aeronautical online graduate course on research methods knowledge and competence: a comprehensive objectivist design and an unstructured design. Quantitative, causal comparative, quasi-experimental methodology was utilized. Using criteria derived from literature, criteria were established for the development and eventual online delivery of a comprehensive objectivist instructional design on graduate research methods learning. Results revealed that the comprehensive objectivist design was significantly more effective than its unstructured counterpart on graduate learners' competence in research methods, but found no significant difference in knowledge. It was recommended that aeronautical institutions (a) create programs with critical thinking and problem solving embedded in their curriculum for enhancing learner competence, and (b) thoroughly train every online instructor in the development and use of comprehensive online instruction.

Comprehensive Aspectual UML approach to support AspectJ.

PubMed

Magableh, Aws; Shukur, Zarina; Ali, Noorazean Mohd

2014-01-01

Unified Modeling Language is the most popular and widely used Object-Oriented modelling language in the IT industry. This study focuses on investigating the ability to expand UML to some extent to model crosscutting concerns (Aspects) to support AspectJ. Through a comprehensive literature review, we identify and extensively examine all the available Aspect-Oriented UML modelling approaches and find that the existing Aspect-Oriented Design Modelling approaches using UML cannot be considered to provide a framework for a comprehensive Aspectual UML modelling approach and also that there is a lack of adequate Aspect-Oriented tool support. This study also proposes a set of Aspectual UML semantic rules and attempts to generate AspectJ pseudocode from UML diagrams. The proposed Aspectual UML modelling approach is formally evaluated using a focus group to test six hypotheses regarding performance; a "good design" criteria-based evaluation to assess the quality of the design; and an AspectJ-based evaluation as a reference measurement-based evaluation. The results of the focus group evaluation confirm all the hypotheses put forward regarding the proposed approach. The proposed approach provides a comprehensive set of Aspectual UML structural and behavioral diagrams, which are designed and implemented based on a comprehensive and detailed set of AspectJ programming constructs.

The Multidimensional Structure of Verbal Comprehension Test Items.

ERIC Educational Resources Information Center

Peled, Zimra

1984-01-01

The multidimensional structure of verbal comprehension test items was investigated. Empirical evidence was provided to support the theory that item tasks are multivariate-multiordered composites of faceted components: language, contextual knowledge, and cognitive operation. Linear and circular properties of cylindrical manifestation were…

NASA's Space Environments and Effects Program: Technology for the New Millennium

NASA Technical Reports Server (NTRS)

Hardage, Donna M.; Pearson, Steven D.

2000-01-01

Current trends in spacecraft development include the use of advanced technologies while maintaining the "faster, better, cheaper" philosophy. Spacecraft designers are continually designing with smaller and faster electronics as well as lighter and thinner materials providing better performance, lower weight, and ultimately lower costs. Given this technology trend, spacecraft will become increasingly susceptible to the harsh space environments, causing damaging or even disabling effects on space systems. NASA's Space Environments and Effects (SEE) Program defines the space environments and provides advanced technology development to support the design, development, and operation of spacecraft systems that will accommodate or mitigate effects due to the harsh space environments. This Program provides a comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this multitudinous information is properly maintained and inserted into spacecraft design programs. A description of the SEE Program, its accomplishments, and future activities is provided.

Mechanism and design of intermittent aeration activated sludge process for nitrogen removal.

PubMed

Hanhan, Oytun; Insel, Güçlü; Yagci, Nevin Ozgur; Artan, Nazik; Orhon, Derin

2011-01-01

The paper provided a comprehensive evaluation of the mechanism and design of intermittent aeration activated sludge process for nitrogen removal. Based on the specific character of the process the total cycle time, (T(C)), the aerated fraction, (AF), and the cycle time ratio, (CTR) were defined as major design parameters, aside from the sludge age of the system. Their impact on system performance was evaluated by means of process simulation. A rational design procedure was developed on the basis of basic stochiometry and mass balance related to the oxidation and removal of nitrogen under aerobic and anoxic conditions, which enabled selected of operation parameters of optimum performance. The simulation results indicated that the total nitrogen level could be reduced to a minimum level by appropriate manipulation of the aerated fraction and cycle time ratio. They also showed that the effluent total nitrogen could be lowered to around 4.0 mgN/L by adjusting the dissolved oxygen set-point to 0.5 mg/L, a level which promotes simultaneous nitrification and denitrification.

Development and Testing of a Novel Green Propellant Piston Tank

NASA Technical Reports Server (NTRS)

Diaz, C. E.; Cavender, D. P.; Higdon, K.; Abrams, J.; Duchek, M. E.; Mader, H.

2017-01-01

Analytical Mechanics Associates (AMA), in cooperation with NASA Marshall Space Flight Center's (MSFC's) Spacecraft Propulsion Systems Branch, developed and tested a novel propellant tank design that employs an internal piston pressurized with an inert gas to expel propellant to thrusters. During the course of this activity, AMA designed, oversaw fabrication, and delivered to MSFC for testing, a piston propellant tank sized for 3U or larger CubeSats. MSFC conducted liquid expulsion testing using ethylene glycol as a referee fluid to map the tank's performance at different pressures and piston positions. Following the expulsion test campaign, the tank is planned to be integrated into a propulsion system test bed for hot fire tests with a 100mN monopropellant thruster to evaluate the tank's influence on thruster performance when operated in a flight like manner. Described in this paper is a comprehensive summary of how the tanks were designed, built, and tested. The fundamental knowledge gained through the fabrication and testing of these tanks gives evidence that the piston tank design may be scalable to meet the requirements and constraints of other small satellites.

From “Comprehensive Transportation Hub” to “City New Sitting Room”---Overall the design about Jinan East district comprehensive transportation hub

NASA Astrophysics Data System (ADS)

Lv, Jie; Guo, Jianmin; Li, Jin

2017-08-01

integrated transport hub or high-speed rail station often talked about, often known as the “city portal” and the title of “city window”, so the comprehensive transportation hub or the high-speed rail station of a city is very important to a region or a provincial. At the same time, it reflects that the managers and users of a city only focus on the comprehensive transportation hub of transportation service function and ignore her cities attributes and functions. Jinan east district comprehensive transportation hub in the beginning of design is given a feature that it has to serve both the traffic and city. We are trying to build a new center for Jinan east new town, the window to welcome people, the city hall of hospitality.

NASA's Orbital Space Plane Risk Reduction Strategy

NASA Technical Reports Server (NTRS)

Dumbacher, Dan

2003-01-01

This paper documents the transformation of NASA s Space Launch Initiative (SLI) Second Generation Reusable Launch Vehicle Program under the revised Integrated Space Transportation Plan, announced November 2002. Outlining the technology development approach followed by the original SLI, this paper gives insight into the current risk-reduction strategy that will enable confident development of the Nation s first orbital space plane (OSP). The OSP will perform an astronaut and contingency cargo transportation function, with an early crew rescue capability, thus enabling increased crew size and enhanced science operations aboard the International Space Station. The OSP design chosen for full-scale development will take advantage of the latest innovations American industry has to offer. The OSP Program identifies critical technologies that must be advanced to field a safe, reliable, affordable space transportation system for U.S. access to the Station and low-Earth orbit. OSP flight demonstrators will test crew safety features, validate autonomous operations, and mature thermal protection systems. Additional enabling technologies may be identified during the OSP design process as part of an overall risk-management strategy. The OSP Program uses a comprehensive and evolutionary systems acquisition approach, while applying appropriate lessons learned.

Design of a Comprehensive Biochemistry and Molecular Biology Experiment: Phase Variation Caused by Recombinational Regulation of Bacterial Gene Expression

ERIC Educational Resources Information Center

Sheng, Xiumei; Xu, Shungao; Lu, Renyun; Isaac, Dadzie; Zhang, Xueyi; Zhang, Haifang; Wang, Huifang; Qiao, Zheng; Huang, Xinxiang

2014-01-01

Scientific experiments are indispensable parts of Biochemistry and Molecular Biology. In this study, a comprehensive Biochemistry and Molecular Biology experiment about "Salmonella enterica" serovar Typhi Flagellar phase variation has been designed. It consisted of three parts, namely, inducement of bacterial Flagellar phase variation,…

Learning Technology: Enhancing Learning in New Designs for the Comprehensive High School.

ERIC Educational Resources Information Center

Damyanovich, Mike; And Others

Technology, directed to each of the parts that collectively give shape and direction to the school, should provide the critical mass necessary to realize the specifications for the New Designs for the Comprehensive High School project. Learners should have access to personal productivity tools that increase effectiveness and efficiency in the…

Comprehensive Computer-Based Instructional Programs: What Works for Educationally Disadvantaged Students?

ERIC Educational Resources Information Center

Swan, Karen; And Others

The Computer Pilot Program of the Division of Computer Information Services of the New York City Board of Education was designed to investigate the claim that comprehensive computer-based instruction (CBI) might best be used to improve the basic skills of educationally disadvantaged students. This ongoing project is designed to identify…

Exploring a Comprehensive Model for Early Childhood Vocabulary Instruction: A Design Experiment

ERIC Educational Resources Information Center

Wang, X. Christine; Christ, Tanya; Chiu, Ming Ming

2014-01-01

Addressing a critical need for effective vocabulary practices in early childhood classrooms, we conducted a design experiment to achieve three goals: (1) developing a comprehensive model for early childhood vocabulary instruction, (2) examining the effectiveness of this model, and (3) discerning the contextual conditions that hinder or facilitate…

75 FR 66780 - Suisun Marsh Habitat Management, Preservation, and Restoration Plan, California

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-29

... joint lead agencies, and the State of California Department of Fish and Game (DFG), acting as the... comprehensive 30-year plan designed to address various conflicts regarding use of resources within approximately... comprehensive plan designed to address the various conflicts regarding use of Marsh resources, with the focus on...

The Influence of Textbook Format on Postsecondary Proficient and Remedial Readers: Designing Information Using Visual Language

ERIC Educational Resources Information Center

Tetlan, W. Lou

2009-01-01

This study examined whether the design of textbook material affects comprehension and memory of textbook material under certain cognitive conditions for proficient and remedial readers. Using quantitative and qualitative research methods, format was found to significantly affect comprehension and memory. Proficient Male scored significantly…

The Research and Evaluation of Serious Games: Toward a Comprehensive Methodology

ERIC Educational Resources Information Center

Mayer, Igor; Bekebrede, Geertje; Harteveld, Casper; Warmelink, Harald; Zhou, Qiqi; van Ruijven, Theo; Lo, Julia; Kortmann, Rens; Wenzler, Ivo

2014-01-01

The authors present the methodological background to and underlying research design of an ongoing research project on the scientific evaluation of serious games and/or computer-based simulation games (SGs) for advanced learning. The main research questions are: (1) what are the requirements and design principles for a comprehensive social…

Principles of VCSEL designing

NASA Astrophysics Data System (ADS)

Nakwaski, W.

2008-03-01

Comprehensive computer simulations are currently the most efficient and cheap methods in designing and optimisation of semiconductor device structures. Seemingly they should be as exact as possible, but in practice it is well known that the most exact approaches are also the most involved and the most time-consuming ones and need powerful computers. In some cases, cheaper somewhat simplified modelling simulations are sufficiently accurate. Therefore, an appropriate modelling approach should be chosen taking into account a compromise between our needs and our possibilities. Modelling of operation and designing of structures of vertical-cavity surface-emitting diode lasers (VCSELs) requires appropriate mathematical description of physical processes crucial for devices operation, i.e., various optical, electrical, thermal, recombination and sometimes also mechanical phenomena taking place within their volumes. Equally important are mutual interactions between above individual processes, usually strongly non-linear and creating a real network of various inter-relations. Chain is as strong as its weakest link. Analogously, model is as exact as its less exact part. Therefore it is useless to improve exactness of its more accurate parts and not to care about less exact ones. All model parts should exhibit similar accuracy. In any individual case, a reasonable compromise should be reached between high modelling fidelity and its practical convenience depending on a main modelling goal, importance and urgency of expected results, available equipment and also financial possibilities. In the present paper, some simplifications used in VCSEL modelling are discussed and their impact on exactness of VCSEL designing is analysed.

Silicon Micromachined Sensor for Broadband Vibration Analysis

NASA Technical Reports Server (NTRS)

Gutierrez, Adolfo; Edmans, Daniel; Cormeau, Chris; Seidler, Gernot; Deangelis, Dave; Maby, Edward

1995-01-01

The development of a family of silicon based integrated vibration sensors capable of sensing mechanical resonances over a broad range of frequencies with minimal signal processing requirements is presented. Two basic general embodiments of the concept were designed and fabricated. The first design was structured around an array of cantilever beams and fabricated using the ARPA sponsored multi-user MEMS processing system (MUMPS) process at the Microelectronics Center of North Carolina (MCNC). As part of the design process for this first sensor, a comprehensive finite elements analysis of the resonant modes and stress distribution was performed using PATRAN. The dependence of strain distribution and resonant frequency response as a function of Young's modulus in the Poly-Si structural material was studied. Analytical models were also studied. In-house experimental characterization using optical interferometry techniques were performed under controlled low pressure conditions. A second design, intended to operate in a non-resonant mode and capable of broadband frequency response, was proposed and developed around the concept of a cantilever beam integrated with a feedback control loop to produce a null mode vibration sensor. A proprietary process was used to integrat a metal-oxide semiconductor (MOS) sensing device, with actuators and a cantilever beam, as part of a compatible process. Both devices, once incorporated as part of multifunction data acquisition and telemetry systems will constitute a useful system for NASA launch vibration monitoring operations. Satellite and other space structures can benefit from the sensor for mechanical condition monitoring functions.

Theoretical Tools and Software for Modeling, Simulation and Control Design of Rocket Test Facilities

NASA Technical Reports Server (NTRS)

Richter, Hanz

2004-01-01

A rocket test stand and associated subsystems are complex devices whose operation requires that certain preparatory calculations be carried out before a test. In addition, real-time control calculations must be performed during the test, and further calculations are carried out after a test is completed. The latter may be required in order to evaluate if a particular test conformed to specifications. These calculations are used to set valve positions, pressure setpoints, control gains and other operating parameters so that a desired system behavior is obtained and the test can be successfully carried out. Currently, calculations are made in an ad-hoc fashion and involve trial-and-error procedures that may involve activating the system with the sole purpose of finding the correct parameter settings. The goals of this project are to develop mathematical models, control methodologies and associated simulation environments to provide a systematic and comprehensive prediction and real-time control capability. The models and controller designs are expected to be useful in two respects: 1) As a design tool, a model is the only way to determine the effects of design choices without building a prototype, which is, in the context of rocket test stands, impracticable; 2) As a prediction and tuning tool, a good model allows to set system parameters off-line, so that the expected system response conforms to specifications. This includes the setting of physical parameters, such as valve positions, and the configuration and tuning of any feedback controllers in the loop.

Entropy-Based Performance Analysis of Jet Engines; Methodology and Application to a Generic Single-Spool Turbojet

NASA Astrophysics Data System (ADS)

Abbas, Mohammad

Recently developed methodology that provides the direct assessment of traditional thrust-based performance of aerospace vehicles in terms of entropy generation (i.e., exergy destruction) is modified for stand-alone jet engines. This methodology is applied to a specific single-spool turbojet engine configuration. A generic compressor performance map along with modeled engine component performance characterizations are utilized in order to provide comprehensive traditional engine performance results (engine thrust, mass capture, and RPM), for on and off-design engine operation. Details of exergy losses in engine components, across the entire engine, and in the engine wake are provided and the engine performance losses associated with their losses are discussed. Results are provided across the engine operating envelope as defined by operational ranges of flight Mach number, altitude, and fuel throttle setting. The exergy destruction that occurs in the engine wake is shown to be dominant with respect to other losses, including all exergy losses that occur inside the engine. Specifically, the ratio of the exergy destruction rate in the wake to the exergy destruction rate inside the engine itself ranges from 1 to 2.5 across the operational envelope of the modeled engine.

76 FR 54004 - Agency Information Collection (Joint Application for Comprehensive Assistance and Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Application for Comprehensive Assistance and Support Services for Family Caregivers) Activity Under OMB Review... INFORMATION: Title: Joint Application for Comprehensive Assistance and Support Services for Family Caregivers... financial benefits under the Caregiver Program. Individuals designated as primary or secondary family...

76 FR 24410 - Financial Crimes Enforcement Network; Comprehensive Iran Sanctions, Accountability, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... Financial Crimes Enforcement Network; Comprehensive Iran Sanctions, Accountability, and Divestment Act of... congressional mandate to prescribe regulations under section 104(e) of the Comprehensive Iran Sanctions... financial institution designated by the U.S. Government in connection with Iran's proliferation of weapons...

Memory Operations That Support Language Comprehension: Evidence From Verb-Phrase Ellipsis

PubMed Central

Martin, Andrea E.; McElree, Brian

2010-01-01

Comprehension of verb-phrase ellipsis (VPE) requires reevaluation of recently processed constituents, which often necessitates retrieval of information about the elided constituent from memory. A. E. Martin and B. McElree (2008) argued that representations formed during comprehension are content addressable and that VPE antecedents are retrieved from memory via a cue-dependent direct-access pointer rather than via a search process. This hypothesis was further tested by manipulating the location of interfering material—either before the onset of the antecedent (proactive interference; PI) or intervening between antecedent and ellipsis site (retroactive interference; RI). The speed–accuracy tradeoff procedure was used to measure the time course of VPE processing. The location of the interfering material affected VPE comprehension accuracy: RI conditions engendered lower accuracy than PI conditions. Crucially, location did not affect the speed of processing VPE, which is inconsistent with both forward and backward search mechanisms. The observed time-course profiles are consistent with the hypothesis that VPE antecedents are retrieved via a cue-dependent direct-access operation. PMID:19686017

How do typographical factors affect reading text and comprehension performance in Arabic?

PubMed

Ganayim, Deia; Ibrahim, Raphiq

2013-04-01

The objective of this study was to establish basic reading performance that could lead to useful design recommendations for print display text formats and layouts for the improvement of reading and comprehension performance of print text, such as academic writings, books, and newspapers, of Arabic language. Readability of English print text has been shown to be influenced by a number of typographical variables, including interline spacing, column setting and line length, and so on.Therefore, it is very important to improve the reading efficiency and satisfaction of print text reading and comprehension by following simple design guidelines. Most existing research on readability of print text is oriented to build guidelines for designing English texts rather than Arabic. However, guidelines built for English script cannot be simply applied for Arabic script because of orthographic differences. In the current study, manipulating interline spacing and column setting and line length generated nine text layouts. The reading and comprehension performance of 210 native Arab students assigned randomly to the different text layouts was compared. Results showed that the use of multicolumn setting (with medium or short line length) affected comprehension achievement but not reading and comprehension speed. Participants' comprehension scores were better for the single-column (with long line length) than for the multicolumn setting. However, no effect was found for interline spacing. The recommendations for appropriate print text format and layout in Arabic language based on the results of objective measures facilitating reading and comprehension performance is a single-column (with long line length) layout with no relevance of the interline spacing.

Developing an Operator Training Program.

ERIC Educational Resources Information Center

Wubbena, Robert L.

1978-01-01

The study reported is a nationwide comprehensive analysis of the availability of training and the problems associated with the development of effective state programs for operators of water supply and wastewater facilities. (CS)

Thermal, size and surface effects on the nonlinear pull-in of small-scale piezoelectric actuators

NASA Astrophysics Data System (ADS)

SoltanRezaee, Masoud; Ghazavi, Mohammad-Reza

2017-09-01

Electrostatically actuated miniature wires/tubes have many operational applications in the high-tech industries. In this research, the nonlinear pull-in instability of piezoelectric thermal small-scale switches subjected to Coulomb and dissipative forces is analyzed using strain gradient and modified couple stress theories. The discretized governing equation is solved numerically by means of the step-by-step linearization method. The correctness of the formulated model and solution procedure is validated through comparison with experimental and several theoretical results. Herein, the length-scale, surface energy, van der Waals attraction and nonlinear curvature are considered in the present comprehensive model and the thermo-electro-mechanical behavior of cantilever piezo-beams are discussed in detail. It is found that the piezoelectric actuation can be used as a design parameter to control the pull-in phenomenon. The obtained results are applicable in stability analysis, practical design and control of actuated miniature intelligent devices.

An Optimization Framework for Dynamic Hybrid Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wenbo Du; Humberto E Garcia; Christiaan J.J. Paredis

A computational framework for the efficient analysis and optimization of dynamic hybrid energy systems (HES) is developed. A microgrid system with multiple inputs and multiple outputs (MIMO) is modeled using the Modelica language in the Dymola environment. The optimization loop is implemented in MATLAB, with the FMI Toolbox serving as the interface between the computational platforms. Two characteristic optimization problems are selected to demonstrate the methodology and gain insight into the system performance. The first is an unconstrained optimization problem that optimizes the dynamic properties of the battery, reactor and generator to minimize variability in the HES. The second problemmore » takes operating and capital costs into consideration by imposing linear and nonlinear constraints on the design variables. The preliminary optimization results obtained in this study provide an essential step towards the development of a comprehensive framework for designing HES.« less

AS Migration and Optimization of the Power Integrated Data Network

NASA Astrophysics Data System (ADS)

Zhou, Junjie; Ke, Yue

2018-03-01

In the transformation process of data integration network, the impact on the business has always been the most important reference factor to measure the quality of network transformation. With the importance of the data network carrying business, we must put forward specific design proposals during the transformation, and conduct a large number of demonstration and practice to ensure that the transformation program meets the requirements of the enterprise data network. This paper mainly demonstrates the scheme of over-migrating point-to-point access equipment in the reconstruction project of power data comprehensive network to migrate the BGP autonomous domain to the specified domain defined in the industrial standard, and to smooth the intranet OSPF protocol Migration into ISIS agreement. Through the optimization design, eventually making electric power data network performance was improved on traffic forwarding, traffic forwarding path optimized, extensibility, get larger, lower risk of potential loop, the network stability was improved, and operational cost savings, etc.

The GALAXIE all-optical FEL project

NASA Astrophysics Data System (ADS)

Rosenzweig, J. B.; Arab, E.; Andonian, G.; Cahill, A.; Fitzmorris, K.; Fukusawa, A.; Hoang, P.; Jovanovic, I.; Marcus, G.; Marinelli, A.; Murokh, A.; Musumeci, P.; Naranjo, B.; O'Shea, B.; O'Shea, F.; Ovodenko, A.; Pogorelsky, I.; Putterman, S.; Roberts, K.; Shumail, M.; Tantawi, S.; Valloni, A.; Yakimenko, V.; Xu, G.

2012-12-01

We describe a comprehensive project, funded under the DARPA AXiS program, to develop an all-optical table-top X-ray FEL based on dielectric acceleration and electromagnetic undulators, yielding a compact source of coherent X-rays for medical and related applications. The compactness of this source demands that high field (>GV/m) acceleration and undulation-inducing fields be employed, thus giving rise to the project's acronym: GV/m AcceLerator And X-ray Integrated Experiment (GALAXIE). There are numerous physics and technical hurdles to surmount in this ambitious scenario, and the integrated solutions include: a biharmonic photonic TW structure, 200 micron wavelength electromagnetic undulators, 5 μm laser development, ultra-high brighness magnetized/asymmetric emittance electron beam generation, and SASE FEL operation. We describe the overall design philosophy of the project, the innovative approaches to addressing the challenges presented by the design, and the significant progress towards realization of these approaches in the nine months since project initialization.

Development and construction of a comprehensive set of research diagnostics for the FLARE user facility

NASA Astrophysics Data System (ADS)

Yoo, Jongsoo; Jara-Almonte, J.; Majeski, S.; Frank, S.; Ji, H.; Yamada, M.

2016-10-01

FLARE (Facility for Laboratory Reconnection Experiments) will be operated as a flexible user facility, and so a complete set of research diagnostics is under development, including magnetic probe arrays, Langmuir probes, Mach probes, spectroscopic probes, and a laser interferometer. In order to accommodate the various requirements of users, large-scale (1 m), variable resolution (0.5-4 cm) magnetic probes have been designed, and are currently being prototyped. Moreover, a fully fiber-coupled laser interferometer has been designed to measure the line-integrated electron density. This fiber-coupled interferometer system will reduce the complexity of alignment processes and minimize maintenance of the system. Finally, improvements to the electrostatic probes and spectroscopic probes currently used in the Magnetic Reconnection Experiment (MRX) are discussed. The specifications of other subsystems, such as integrators and digitizers, are also presented. This work is supported by DoE Contract No. DE-AC0209CH11466.

C3 System Performance Simulation and User Manual. Getting Started: Guidelines for Users

NASA Technical Reports Server (NTRS)

2006-01-01

This document is a User's Manual describing the C3 Simulation capabilities. The subject work was designed to simulate the communications involved in the flight of a Remotely Operated Aircraft (ROA) using the Opnet software. Opnet provides a comprehensive development environment supporting the modeling of communication networks and distributed systems. It has tools for model design, simulation, data collection, and data analysis. Opnet models are hierarchical -- consisting of a project which contains node models which in turn contain process models. Nodes can be fixed, mobile, or satellite. Links between nodes can be physical or wireless. Communications are packet based. The model is very generic in its current form. Attributes such as frequency and bandwidth can easily be modified to better reflect a specific platform. The model is not fully developed at this stage -- there are still more enhancements to be added. Current issues are documented throughout this guide.

Introduction to the magnet and vacuum systems of an electron storage ring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weng, W.T.

An accelerator or storage ring complex is a concerted interplay of various functional systems. For the convenience of discussion we can divide it into the following systems: injector, magnet, RF, vacuum, instrumentation and control. In addition, the conventional construction of the building and radiation safety consideration are also needed and finally the beam lines, detector, data acquisition and analysis set-ups for research programs. Dr. L. Teng has given a comprehensive review of the whole complex and the operation of such a facility. I concentrate on the description of magnet and vacuum systems. Only the general function of each system andmore » the basic design concepts will be introduced, no detailed engineering practice will be given which will be best done after a machine design is produced. For further understanding and references a table of bibliography is provided at the end of the paper.« less

An integrated hospital information system in Geneva.

PubMed

Scherrer, J R; Baud, R H; Hochstrasser, D; Ratib, O

1990-01-01

Since the initial design phase from 1971 to 1973, the DIOGENE hospital information system at the University Hospital of Geneva has been treated as a whole and has retained its architectural unity, despite the need for modification and extension over the years. In addition to having a centralized patient database with the mechanisms for data protection and recovery of a transaction-oriented system, the DIOGENE system has a centralized pool of operators who provide support and training to the users; a separate network of remote printers that provides a telex service between the hospital buildings, offices, medical departments, and wards; and a three-component structure that avoids barriers between administrative and medical applications. In 1973, after a 2-year design period, the project was approved and funded. The DIOGENE system has led to more efficient sharing of costly resources, more rapid performance of administrative tasks, and more comprehensive collection of information about the institution and its patients.

Three-dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark-F solid oxide fuel cell stack

NASA Astrophysics Data System (ADS)

Nishida, R. T.; Beale, S. B.; Pharoah, J. G.; de Haart, L. G. J.; Blum, L.

2018-01-01

This work is among the first where the results of an extensive experimental research programme are compared to performance calculations of a comprehensive computational fluid dynamics model for a solid oxide fuel cell stack. The model, which combines electrochemical reactions with momentum, heat, and mass transport, is used to obtain results for an established industrial-scale fuel cell stack design with complex manifolds. To validate the model, comparisons with experimentally gathered voltage and temperature data are made for the Jülich Mark-F, 18-cell stack operating in a test furnace. Good agreement is obtained between the model and experiment results for cell voltages and temperature distributions, confirming the validity of the computational methodology for stack design. The transient effects during ramp up of current in the experiment may explain a lower average voltage than model predictions for the power curve.

Coupled Triboelectric Nanogenerator Networks for Efficient Water Wave Energy Harvesting.

PubMed

Xu, Liang; Jiang, Tao; Lin, Pei; Shao, Jia Jia; He, Chuan; Zhong, Wei; Chen, Xiang Yu; Wang, Zhong Lin

2018-02-27

Water wave energy is a promising clean energy source, which is abundant but hard to scavenge economically. Triboelectric nanogenerator (TENG) networks provide an effective approach toward massive harvesting of water wave energy in oceans. In this work, a coupling design in TENG networks for such purposes is reported. The charge output of the rationally linked units is over 10 times of that without linkage. TENG networks of three different connecting methods are fabricated and show better performance for the ones with flexible connections. The network is based on an optimized ball-shell structured TENG unit with high responsivity to small agitations. The dynamic behavior of single and multiple TENG units is also investigated comprehensively to fully understand their performance in water. The study shows that a rational design on the linkage among the units could be an effective strategy for TENG clusters to operate collaboratively for reaching a higher performance.

EOS situational data shared service mechanism

NASA Astrophysics Data System (ADS)

Lv, L.; Xu, Q.; Lan, C. Z.; Shi, Q. S.; Lu, W. J.; Wu, W. Q.

2016-11-01

With the rapid development of aerospace and remote sensing technology, various high-resolution Earth Observation Systems (EOS) are widely used in economic, social, military and other fields and playing an increasingly prominent role in the construction of Digital Earth and national strategic planning. The normal operation of the system is the premise of high quality data acquisition. Compared with the ground observation mode, EOS itself and the surrounding environment are more complex, and its operation control mainly depends on all kinds of Space Situational Awareness (SSA) data acquisition and analysis. SSA data has more extensive sources, larger volume, stronger time-effectiveness and more complicated structure than traditional geographical spatial data. For effective data sharing and utilization, combined with the analysis of data types and structures, a SSA data sharing identity language SSDSML is designed based on the extensible mark-up language XML, which realizes a comprehensive description of satellites and their attributes, space environment, ground stations, etc. Then EOS situational data shared service mechanism is established and provides a powerful data support for the normal operation of the system.

Optimization of cascading failure on complex network based on NNIA

NASA Astrophysics Data System (ADS)

Zhu, Qian; Zhu, Zhiliang; Qi, Yi; Yu, Hai; Xu, Yanjie

2018-07-01

Recently, the robustness of networks under cascading failure has attracted extensive attention. Different from previous studies, we concentrate on how to improve the robustness of the networks from the perspective of intelligent optimization. We establish two multi-objective optimization models that comprehensively consider the operational cost of the edges in the networks and the robustness of the networks. The NNIA (Non-dominated Neighbor Immune Algorithm) is applied to solve the optimization models. We finished simulations of the Barabási-Albert (BA) network and Erdös-Rényi (ER) network. In the solutions, we find the edges that can facilitate the propagation of cascading failure and the edges that can suppress the propagation of cascading failure. From the conclusions, we take optimal protection measures to weaken the damage caused by cascading failures. We also consider actual situations of operational cost feasibility of the edges. People can make a more practical choice based on the operational cost. Our work will be helpful in the design of highly robust networks or improvement of the robustness of networks in the future.

TASAR Certification and Operational Approval Requirements - Analyses and Results

NASA Technical Reports Server (NTRS)

Koczo, Stefan, Jr.

2015-01-01

This report documents the results of research and development work performed by Rockwell Collins in addressing the Task 1 objectives under NASA Contract NNL12AA11C. Under this contract Rockwell Collins provided analytical support to the NASA Langley Research Center (LaRC) in NASA's development of a Traffic Aware Strategic Aircrew Requests (TASAR) flight deck Electronic Flight Bag (EFB) application for technology transition into operational use. The two primary objectives of this contract were for Rockwell Collins and the University of Iowa OPL to 1) perform an implementation assessment of TASAR toward early certification and operational approval of TASAR as an EFB application (Task 1 of this contract), and 2) design, develop and conduct two Human-in-the-Loop (HITL) simulation experiments that evaluate TASAR and the associated Traffic Aware Planner (TAP) software application to determine the situational awareness and workload impacts of TASAR in the flight deck, while also assessing the level of comprehension, usefulness, and usability of the features of TAP (Task 2 of this contract). This report represents the Task 1 summary report. The Task 2 summary report is provided in [0].

7 CFR 4290.320 - Contents of comprehensive business plan.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Operational Assistance to Smaller Enterprises, demonstrating that the Applicant understands the market and the...) Operational capacity and investment strategies. The Applicant must submit information concerning its policies... expressions of interest to commit such funds to the Applicant. (f) Plan for providing Operational Assistance...

The environmental constraint needs for design improvements to the Saligny I/LLW-repository near Cernavoda NPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barariu, Gheorghe

2007-07-01

The paper presents the new perspectives on the development of the L/ILW Final Repository Project which will be built near Cernavoda NPP. The Repository is designed to satisfy the main performance objectives in accordance to IAEA recommendation. Starting in October 1996, Romania became a country with an operating nuclear power plant. Reactor 2 reached the criticality on May 6, 2007 and it will be put in commercial operation in September 2007. The Ministry of Economy and Finance has decided to proceed with the commissioning of Units 3 and 4 of Cernavoda NPP till 2014. The Strategy for radioactive waste managementmore » was elaborated by National Agency for Radioactive Waste (ANDRAD), the jurisdictional authority for definitive disposal and the coordination of nuclear spent fuel and radioactive waste management (Order 844/2004) with attributions established by Governmental Decision (GO) 31/2006. The Strategy specifies the commissioning of the Saligny L/IL Radwaste Repository near Cernavoda NPP in 2014. When designing the L/IL Radwaste Repository, the following prerequisites have been taken into account: 1) Cernavoda NPP will be equipped with 4 Candu 6 units. 2) National Legislation in radwaste management will be reviewed and/or completed to harmonize with UE standards 3) The selected site is now in process of confirmation after a comprehensive set of interdisciplinary investigations. (author)« less

Graduate Student-Run Course Framework for Comprehensive Professional Development

ERIC Educational Resources Information Center

Needelman, Brian A.; Ruppert, David E.

2006-01-01

Comprehensive professional development is rarely offered to graduate students, yet would assist students to obtain employment and prosper in their careers. Our objective was to design a course framework to provide professional development training to graduate students that is comprehensive, minimizes faculty workload, and provides enculturation…

Design of a high pulse repitition frequency carbon dioxide laser for processing high damage threshold materials

NASA Astrophysics Data System (ADS)

Chatwin, Christopher R.; McDonald, Donald W.; Scott, Brian F.

1989-07-01

The absence of an applications led design philosophy has compromised both the development of laser source technology and its effective implementation into manufacturing technology in particular. For example, CO2 lasers are still incapable of processing classes of refractory and non-ferrous metals. Whilst the scope of this paper is restricted to high power CO2 lasers; the design methodology reported herein is applicable to source technology in general, which when exploited, will effect an expansion of applications. The CO2 laser operational envelope should not only be expanded to incorporate high damage threshold materials but also offer a greater degree of controllability. By a combination of modelling and experimentation the requisite beam characteristics, at the workpiece, were determined then utilised to design the Laser Manufacturing System. The design of sub-system elements was achieved by a combination of experimentation and simulation which benefited from a comprehensive set of software tools. By linking these tools the physical processes in the laser - electron processes in the plasma, the history of photons in the resonator, etc. - can be related, in a detailed model, to the heating mechanisms in the workpiece.

Ethical and Human Rights Foundations of Health Policy: Lessons from Comprehensive Reform in Mexico.

PubMed

Frenk, Julio; Gómez-Dantés, Octavio

2015-12-10

This paper discusses the use of an explicit ethical and human rights framework to guide a reform intended to provide universal and comprehensive social protection in health for all Mexicans, independently of their socio-economic status or labor market condition. This reform was designed, implemented, and evaluated by making use of what Michael Reich has identified as the three pillars of public policy: technical, political, and ethical. The use of evidence and political strategies in the design and negotiation of the Mexican health reform is briefly discussed in the first part of this paper. The second part examines the ethical component of the reform, including the guiding concept and values, as well as the specific entitlements that gave operational meaning to the right to health care that was enshrined in Mexico's 1983 Constitution. The impact of this rights-based health reform, measured through an external evaluation, is discussed in the final section. The main message of this paper is that a clear ethical framework, combined with technical excellence and political skill, can deliver major policy results. Copyright © 2015 Frenk and Gómez-Dantés. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0/), which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original author and source are credited.

The Making of a Lunar Outpost - Exploring a Future Case Study

NASA Astrophysics Data System (ADS)

Lewis, Ruthan; Micheels, Kurt; Dankewicz, Cathy

2007-01-01

Buildup and development of a lunar outpost / base will be an incremental and alternated process of crew, logistics, hardware, and science payload deliveries. To better plan the resources and technological objectives for each increment, one may examine the operational and technological requirements for a ``midterm'' phase and project backwards to derive and strategize requirements and resources for each stage of the development. This comprehensive characterization of the midterm phase will ultimately provide the waypoint by which later development phases can be more effectively planned. A unique and critical engineering and architectural view of a midterm waypoint and the roadmap to achieve the goals and capabilities at that milestone was generated. Data to derive the process and midterm outpost design was acquired during a recent comprehensive National Aeronautics and Space Administration (NASA) research project. Current and soon to be state-of-the-art, viable, proven technologies to support an effective and resourceful outpost design including rigidizable, inflatable structures, hybridized in-situ and imported materials utilization, and environmentally-responsive structures considering thermal, radiation, topographical, low-gravity, crew and transport mobility, habitability, and logistics aspects were investigated and applied. Adjacency analyses were performed to optimize the arrangement of spaces. Additionally, an inventive, internal, organizational architectural system that maps and coordinates lunar and Earth contingency planning configurations and activities, and assists fabrication and layout processes and techniques was derived.

Onondaga Lake Watershed – A Geographic Information System Project Phase I – Needs assessment and spatial data framework

USGS Publications Warehouse

Freehafer, Douglas A.; Pierson, Oliver

2004-01-01

In the fall of 2002, the Onondaga Lake Partnership (OLP) formed a Geographic Information System (GIS) Planning Committee to begin the process of developing a comprehensive watershed geographic information system for Onondaga Lake. The goal of the Onondaga Lake Partnership geographic information system is to integrate the various types of spatial data used for scientific investigations, resource management, and planning and design of improvement projects in the Onondaga Lake Watershed. A needs-assessment survey was conducted and a spatial data framework developed to support the Onondaga Lake Partnership use of geographic information system technology. The design focused on the collection, management, and distribution of spatial data, maps, and internet mapping applications. A geographic information system library of over 100 spatial datasets and metadata links was assembled on the basis of the results of the needs assessment survey. Implementation options were presented, and the Geographic Information System Planning Committee offered recommendations for the management and distribution of spatial data belonging to Onondaga Lake Partnership members. The Onondaga Lake Partnership now has a strong foundation for building a comprehensive geographic information system for the Onondaga Lake watershed. The successful implementation of a geographic information system depends on the Onondaga Lake Partnership’s determination of: (1) the design and plan for a geographic information system, including the applications and spatial data that will be provided and to whom, (2) the level of geographic information system technology to be utilized and funded, and (3) the institutional issues of operation and maintenance of the system.

A process for quantifying aesthetic and functional breast surgery: I. Quantifying optimal nipple position and vertical and horizontal skin excess for mastopexy and breast reduction.

PubMed

Tebbetts, John B

2013-07-01

This article defines a comprehensive process using quantified parameters for objective decision making, operative planning, technique selection, and outcomes analysis in mastopexy and breast reduction, and defines quantified parameters for nipple position and vertical and horizontal skin excess. Future submissions will detail application of the processes for skin envelope design and address composite, three-dimensional parenchyma modification options. Breast base width was used to define a proportional, desired nipple-to-inframammary fold distance for optimal aesthetics. Vertical and horizontal skin excess were measured, documented, and used for technique selection and skin envelope design in mastopexy and breast reduction. This method was applied in 124 consecutive mastopexy and 122 consecutive breast reduction cases. Average follow-up was 4.6 years (range, 6 to 14 years). No changes were made to the basic algorithm of the defined process during the study period. No patient required nipple repositioning. Complications included excessive lower pole restretch (4 percent), periareolar scar hypertrophy (0.8 percent), hematoma (1.2 percent), and areola shape irregularities (1.6 percent). Delayed healing at the junction of vertical and horizontal scars occurred in two of 124 reduction patients (1.6 percent), neither of whom required revision. The overall reoperation rate was 6.5 percent (16 of 246). This study defines the first steps of a comprehensive process for using objectively defined parameters that surgeons can apply to skin envelope design for mastopexy and breast reduction. The method can be used in conjunction with, or in lieu of, other described methods to determine nipple position.

Application of BIM Technology in Building Water Supply and Drainage Design

NASA Astrophysics Data System (ADS)

Wei, Tianyun; Chen, Guiqing; Wang, Junde

2017-12-01

Through the application of BIM technology, the idea of building water supply and drainage designers can be related to the model, the various influencing factors to affect water supply and drainage design can be considered more comprehensively. BIM(Building information model) technology assist in improving the design process of building water supply and drainage, promoting the building water supply and drainage planning, enriching the building water supply and drainage design method, improving the water supply and drainage system design level and building quality. Combined with fuzzy comprehensive evaluation method to analyze the advantages of BIM technology in building water supply and drainage design. Therefore, application prospects of BIM technology are very worthy of promotion.

Work Plan for Comprehensive Groundwater Sampling - 2012 (Operable Unit 2), LCP Chemicals Site, Brunswick, GA

EPA Pesticide Factsheets

April 2012 plan to conduct a comprehensive sampling of groundwater from all wells in the site-wide monitoring well network, at the LCP Chemicals Site in Brunswick, GA. Region ID: 04 DocID: 10843427, DocDate: 04-01-2012

Effects of Cloze Instructional Approach on Senior Secondary School Students' Achievement in Igbo Language Reading Comprehension

ERIC Educational Resources Information Center

Eze, Nneka Justina

2015-01-01

This study assessed the effects of cloze instructional approach on senior secondary school students' achievement in Igbo language reading comprehension. The study utilized a quasi experimental research design of the pretest posttest non-equivalent control group design. The study was conducted in Abakaliki education zone of Ebonyi State of Nigeria.…

Investigating Deaf Students' Use of Visual Multimedia Resources in Reading Comprehension

ERIC Educational Resources Information Center

Nikolaraizi, Magda; Vekiri, Ioanna; Easterbrooks, Susan R.

2013-01-01

A mixed research design was used to examine how deaf students used the visual resources of a multimedia software package that was designed to support reading comprehension. The viewing behavior of 8 deaf students, ages 8-12 years, was recorded during their interaction with multimedia software that included narrative texts enriched with Greek Sign…

An Examination of Instructional Interactions between Volunteer-Tutors and Students Who Show Differential Gains in Reading Comprehension

ERIC Educational Resources Information Center

Newcomer, Laurie J.

2010-01-01

It is essential to provide high quality interventions designed to improve struggling readers' reading comprehension while making use of limited resources. This study explored, through an holistic, multiple-case study design, volunteer-student interactions and activities in an after school reading program utilizing minimally-trained volunteers. The…

A Framework for Rebuilding Initial Certification and Preparation Programs in Educational Leadership: Lessons from Whole-State Reform Initiatives

ERIC Educational Resources Information Center

Murphy, Joseph; Moorman, Hunter N.; McCarthy, Martha

2008-01-01

Background/Context: This study examines the extent of reform in preparation programs in school leadership in six states employing a comprehensive, whole-state intervention design. Although no studies of these or other comprehensive reform designs are available, there is a rich context surrounding preparation reform work that informed our…

Combined Application of Study Design and Case-Based Learning Comprehensive Model in Epidemiology Teaching

ERIC Educational Resources Information Center

Shi, Xiuquan; Zhou, Yanna; Wang, Haiyan; Wang, Tao; Nie, Chan; Shi, Shangpeng

2017-01-01

This paper aims to conduct the SD-CBL (study design with the case based learning, SD-CBL) in Epidemiology teaching and evaluate its effect. Students from five classes were recruited, and a combined comprehensive teaching model of SD-CBL was used in the "Injury Epidemiology" chapter, while other chapters in "Epidemiology"…

Report of the oversight assessment of the operational readiness review of the Savannah River Site Defense Waste Processing Facility Cold Chemical Runs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, B.

1993-03-01

This report presents the results of an oversight assessment (OA) conducted by the US Department of Energy's (DOE) Office of Environment, Safety and Health (EH) of the operational readiness review (ORR) activities for the Cold Chemical Runs (CCRs) at the Defense Waste Processing Facility (DWPF) located at Savannah River Site (SRS). The EH OA of this facility took place concurrently with an ORR performed by the DOE Office of Environmental Restoration and Waste Management (EM). The EM ORR was conducted from September 28, 1992, through October 9, 1992, although portions of the EM ORR were extended beyond this period. Themore » EH OA evaluated the comprehensiveness and effectiveness of the EM ORR. The EH OA was designed to ascertain whether the EM ORR was thorough and demonstrated sufficient inquisitiveness to verify that the implementation of programs and procedures is adequate to assure the protection of worker safety and health. The EH OA was carried out in accordance with the protocol and procedures of the EH Program for Oversight Assessment of Operational Readiness Evaluations for Startups and Restarts,'' dated September 15, 1992. Based on its OA and verification of the resolution of EH OA findings, the EH OA Team believes that the startup of the CCRs may be safely begun, pending satisfactory completion and verification of the prestart findings identified by the EM ORR. The EH OA was based primarily on an evaluation of the comprehensiveness and effectiveness of the EM ORR and addressed the following areas: industrial safety, industrial hygiene, and respiratory protection; fire protection; and chemical safety. The EH OA conducted independent vertical-slice'' reviews to confirm EM ORR results in the areas of confined-space entry, respiratory protection, fire protection, and chemical safety.« less

[Case-control study on comprehensive traditional Chinese medicine therapy for preventing postsurgery stiffness after operation for terrible triad of the elbow].

PubMed

Lin, Guang-Mao; Liu, Liang-Le; Ye, Li-Jie; Li, Qi; Liu, Mei-Fen

2014-11-01

To study therapeutic effects of comprehensive traditional Chinese medicine therapy for preventing postsurgery stiffness after operation for terrible triad of the elbow. From December 2008 to December 2013,32 patients with elbow triad were randomly divided into two groups: therapy group and control group. There were 17 patients in control group including 12 males and 5 females with a mean age of (41.0 ± 7.1) years old. The patients in control group were received the past procedure therapy. There were 15 patients in therapy group, including 10 males and 5 females with a mean age of (41.3 ± 7.6) years old. The patients in therapy group were received comprehensive traditional Chinese medicine therapy, including passive exercise training at early stage (0 to 2 weeks after operation), transition from passive to active exercise training at middle stage (3 to 4 weeks after operation), and active exercise training at late stage (5 to 12 weeks after operation). Other treatment methods, such as orally taking or externally use of Chinese herbal medicine, manipulation and physiotherapy, were used at all stages. The Mayo Elbow Performance Score, patient satisfaction and complications were evaluated and analyzed. All the patients were followed up, and the mean duration was 7.5 months. There were no complications such as internal fixation loosing, obvious displacement fracture and heterotopic ossification occurred. The Mayo score and patient satisfaction in therapy group were higher than those in control group (t = 12.78, P = 0.00; χ2 = 8.719, P = 0.003). Seven patients needed reoperation in control group, compared with 1 patient in therapy group (χ2 = 4.626, P = 0.032). The comprehensive traditional Chinese medicine therapy is effective to prevent postoperative stiffness after operation for terrible triad of the elbow by using different methods at different stages, which is worthy of spread and application.

Snowplow Operator and Supervisor Training: Research Brief

DOT National Transportation Integrated Search

2017-10-01

This project developed a comprehensive snowplow operator and supervisor training program that provides flexibility for states to modify or update the content as needed. The 22-module program covers equipment, materials, techniques and procedures.

ITS/operations resource guide 2007

DOT National Transportation Integrated Search

2007-01-01

The U.S. Department of Transportations (U.S. DOTs) ITS/Operations Resource Guide 2007 is a comprehensive listing of over 400 documents, videos, websites, training courses, software tools, and points of contact related to intelligent transportat...

Improving the quality of communication in organised cervical cancer screening programmes.

PubMed

Giordano, Livia; Webster, Premila; Anthony, Charles; Szarewski, Anne; Davies, Philip; Arbyn, Marc; Segnan, Nereo; Austoker, Joan

2008-07-01

To provide health professionals involved in cervical cancer screening with an insight into the complex issues relating to communication about screening and to provide a framework for a more effective communication strategy. This paper has been compiled by a multidisciplinary pan-European group of health professionals and cancer advocates from several European screening programmes. European surveys on screening communication, literature reviews and group discussion were used for this purpose. Information on cervical screening must be accessible, relevant, comprehensible, comprehensive, client-centred, phase-specific and multilevel. An effective communication strategy should consider health professionals' screening knowledge and their communication skills, consumers' health literacy skills and the communication needs of specific sub-groups in the target population. Co-operation between screening professionals, advocacy groups and journalists should be promoted. To communicate effectively and appropriately is a complex task which can be influenced by a number of factors. Screening workers need better information themselves and must take into account the needs and characteristics of the target population. This document should provide a useful tool to help screening professionals in designing and developing good quality and effective communication strategies.

A comprehensive review of thin-layer drying models used in agricultural products.

PubMed

Ertekin, Can; Firat, M Ziya

2017-03-04

Drying is one of the widely used methods of grain, fruit, and vegetable preservation. The important aim of drying is to reduce the moisture content and thereby increase the lifetime of products by limiting enzymatic and oxidative degradation. In addition, by reducing the amount of water, drying reduces the crop losses, improves the quality of dried products, and facilitates its transportation, handling, and storage requirements. Drying is a process comprising simultaneous heat and mass transfer within the material, and between the surface of the material and the surrounding media. Many models have been used to describe the drying process for different agricultural products. These models are used to estimate drying time of several products under different drying conditions, and how to increase the drying process efficiency and also to generalize drying curves, for the design and operation of dryers. Several investigators have proposed numerous mathematical models for thin-layer drying of many agricultural products. This study gives a comprehensive review of more than 100 different semitheoretical and empirical thin-layer drying models used in agricultural products and evaluates the statistical criteria for the determination of appropriate model.

[Multi-mathematical modelings for compatibility optimization of Jiangzhi granules].

PubMed

Yang, Ming; Zhang, Li; Ge, Yingli; Lu, Yanliu; Ji, Guang

2011-12-01

To investigate into the method of "multi activity index evaluation and combination optimized of mult-component" for Chinese herbal formulas. According to the scheme of uniform experimental design, efficacy experiment, multi index evaluation, least absolute shrinkage, selection operator (LASSO) modeling, evolutionary optimization algorithm, validation experiment, we optimized the combination of Jiangzhi granules based on the activity indexes of blood serum ALT, ALT, AST, TG, TC, HDL, LDL and TG level of liver tissues, ratio of liver tissue to body. Analytic hierarchy process (AHP) combining with criteria importance through intercriteria correlation (CRITIC) for multi activity index evaluation was more reasonable and objective, it reflected the information of activity index's order and objective sample data. LASSO algorithm modeling could accurately reflect the relationship between different combination of Jiangzhi granule and the activity comprehensive indexes. The optimized combination of Jiangzhi granule showed better values of the activity comprehensive indexed than the original formula after the validation experiment. AHP combining with CRITIC can be used for multi activity index evaluation and LASSO algorithm, it is suitable for combination optimized of Chinese herbal formulas.

Analysis and simulation of the I C engine Otto cycle using the second law of thermodynamics

NASA Astrophysics Data System (ADS)

Abdel-Rahim, Y. M.

The present investigation is an application of the second law of thermodynamics to the spark ignition engine cycle. A comprehensive thermodynamic analysis of the air standard cycle is conducted using the first and second laws of thermodynamics, the ideal gas equation of state and the perfect gas properties for air. The study investigates the effect of the cycle parameters on the cycle performance reflected by the first and second law efficiencies, the heat added, the work done, the available energy added as well as the history of the internal, available and unavailable energies along the cycle. The study shows that the second law efficiency is a function of the compression ratio, the initial temperature, the maximum temperature as well as the dead state temperature. A non-dimensional comprehensive thermodynamic simulation model for the actual Otto cycle is developed to study the effects of the design and operating parameters of the cycle on the cycle performance. The analysis takes into account engine geometry, mixture strength, heat transfer, piston motion, engine speed, mechanical friction, spark advance and combustion duration.

Human Reliability Assessments: Using the Past (Shuttle) to Predict the Future (Orion)

NASA Technical Reports Server (NTRS)

DeMott, Diana L.; Bigler, Mark A.

2017-01-01

NASA (National Aeronautics and Space Administration) Johnson Space Center (JSC) Safety and Mission Assurance (S&MA) uses two human reliability analysis (HRA) methodologies. The first is a simplified method which is based on how much time is available to complete the action, with consideration included for environmental and personal factors that could influence the human's reliability. This method is expected to provide a conservative value or placeholder as a preliminary estimate. This preliminary estimate or screening value is used to determine which placeholder needs a more detailed assessment. The second methodology is used to develop a more detailed human reliability assessment on the performance of critical human actions. This assessment needs to consider more than the time available, this would include factors such as: the importance of the action, the context, environmental factors, potential human stresses, previous experience, training, physical design interfaces, available procedures/checklists and internal human stresses. The more detailed assessment is expected to be more realistic than that based primarily on time available. When performing an HRA on a system or process that has an operational history, we have information specific to the task based on this history and experience. In the case of a Probabilistic Risk Assessment (PRA) that is based on a new design and has no operational history, providing a "reasonable" assessment of potential crew actions becomes more challenging. To determine what is expected of future operational parameters, the experience from individuals who had relevant experience and were familiar with the system and process previously implemented by NASA was used to provide the "best" available data. Personnel from Flight Operations, Flight Directors, Launch Test Directors, Control Room Console Operators, and Astronauts were all interviewed to provide a comprehensive picture of previous NASA operations. Verification of the assumptions and expectations expressed in the assessments will be needed when the procedures, flight rules, and operational requirements are developed and then finalized.

Human Reliability Assessments: Using the Past (Shuttle) to Predict the Future (Orion)

NASA Technical Reports Server (NTRS)

DeMott, Diana; Bigler, Mark

2016-01-01

NASA (National Aeronautics and Space Administration) Johnson Space Center (JSC) Safety and Mission Assurance (S&MA) uses two human reliability analysis (HRA) methodologies. The first is a simplified method which is based on how much time is available to complete the action, with consideration included for environmental and personal factors that could influence the human's reliability. This method is expected to provide a conservative value or placeholder as a preliminary estimate. This preliminary estimate or screening value is used to determine which placeholder needs a more detailed assessment. The second methodology is used to develop a more detailed human reliability assessment on the performance of critical human actions. This assessment needs to consider more than the time available, this would include factors such as: the importance of the action, the context, environmental factors, potential human stresses, previous experience, training, physical design interfaces, available procedures/checklists and internal human stresses. The more detailed assessment is expected to be more realistic than that based primarily on time available. When performing an HRA on a system or process that has an operational history, we have information specific to the task based on this history and experience. In the case of a Probabilistic Risk Assessment (PRA) that is based on a new design and has no operational history, providing a "reasonable" assessment of potential crew actions becomes more challenging. In order to determine what is expected of future operational parameters, the experience from individuals who had relevant experience and were familiar with the system and process previously implemented by NASA was used to provide the "best" available data. Personnel from Flight Operations, Flight Directors, Launch Test Directors, Control Room Console Operators and Astronauts were all interviewed to provide a comprehensive picture of previous NASA operations. Verification of the assumptions and expectations expressed in the assessments will be needed when the procedures, flight rules and operational requirements are developed and then finalized.

Improving Student Comprehension Skills through Instructional Strategies.

ERIC Educational Resources Information Center

Sharp, Patricia; Ashby, Doris

This report intends to describe a program designed to enhance reading comprehension. Reading comprehension relies on skills that enable students to remember facts, draw out main ideas, make inferences, and relate reading to personal experiences. The focus group consisted of middle and high school students in a metropolitan area in northern…

Evaluation of Attention Training and Metacognitive Facilitation to Improve Reading Comprehension in Aphasia

ERIC Educational Resources Information Center

Lee, Jaime B.; Sohlberg, McKay Moore

2013-01-01

Purpose: This pilot study investigated the impact of direct attention training combined with metacognitive facilitation on reading comprehension in individuals with aphasia. Method: A single-subject, multiple baseline design was employed across 4 participants to evaluate potential changes in reading comprehension resulting from an 8-week…

Measuring the Comprehensibility of Englishes within ASEAN among Aseans

ERIC Educational Resources Information Center

Wilang, Jeffrey Dawala; Teo, Adisa

2012-01-01

This paper focuses on designing a comprehensibility test and a questionnaire for spoken world Englishes in Brunei, Malaysia, the Philippines and Singapore, and utilizing the test to investigate the comprehension of Burmese, Cambodians, Indonesians, Laotians, Thais and Vietnamese. We reviewed the demarcation of users of English based on Kachru's…

Incremental and Predictive Utility of Formative Assessment Methods of Reading Comprehension

ERIC Educational Resources Information Center

Marcotte, Amanda M.; Hintze, John M.

2009-01-01

Formative assessment measures are commonly used in schools to assess reading and to design instruction accordingly. The purpose of this research was to investigate the incremental and concurrent validity of formative assessment measures of reading comprehension. It was hypothesized that formative measures of reading comprehension would contribute…

Training Comprehensiveness: Construct Development and Relation with Role Behaviour

ERIC Educational Resources Information Center

Srivastava, Anugamini Priya; Dhar, Rajib Lochan

2015-01-01

Purpose: This study aims to develop the scale for perception of training comprehensiveness and attempts to examine the influence of perception of training comprehensiveness on role behaviour: teachers' efficacy as a mediator and job autonomy as a moderator. Design/methodology/approach: Through the steps for a generation, refinement, purification…