Computer-aided diagnosis of early knee osteoarthritis based on MRI T2 mapping.

PubMed

Wu, Yixiao; Yang, Ran; Jia, Sen; Li, Zhanjun; Zhou, Zhiyang; Lou, Ting

2014-01-01

This work was aimed at studying the method of computer-aided diagnosis of early knee OA (OA: osteoarthritis). Based on the technique of MRI (MRI: Magnetic Resonance Imaging) T2 Mapping, through computer image processing, feature extraction, calculation and analysis via constructing a classifier, an effective computer-aided diagnosis method for knee OA was created to assist doctors in their accurate, timely and convenient detection of potential risk of OA. In order to evaluate this method, a total of 1380 data from the MRI images of 46 samples of knee joints were collected. These data were then modeled through linear regression on an offline general platform by the use of the ImageJ software, and a map of the physical parameter T2 was reconstructed. After the image processing, the T2 values of ten regions in the WORMS (WORMS: Whole-organ Magnetic Resonance Imaging Score) areas of the articular cartilage were extracted to be used as the eigenvalues in data mining. Then,a RBF (RBF: Radical Basis Function) network classifier was built to classify and identify the collected data. The classifier exhibited a final identification accuracy of 75%, indicating a good result of assisting diagnosis. Since the knee OA classifier constituted by a weights-directly-determined RBF neural network didn't require any iteration, our results demonstrated that the optimal weights, appropriate center and variance could be yielded through simple procedures. Furthermore, the accuracy for both the training samples and the testing samples from the normal group could reach 100%. Finally, the classifier was superior both in time efficiency and classification performance to the frequently used classifiers based on iterative learning. Thus it was suitable to be used as an aid to computer-aided diagnosis of early knee OA.

Explanation-aware computing of the prognosis for breast cancer supported by IK-DCBRC: Technical innovation.

PubMed

Khelassi, Abdeldjalil

2014-01-01

Active research is being conducted to determine the prognosis for breast cancer. However, the uncertainty is a major obstacle in this domain of medical research. In that context, explanation-aware computing has the potential for providing meaningful interactions between complex medical applications and users, which would ensure a significant reduction of uncertainty and risks. This paper presents an explanation-aware agent, supported by Intensive Knowledge-Distributed Case-Based Reasoning Classifier (IK-DCBRC), to reduce the uncertainty and risks associated with the diagnosis of breast cancer. A meaningful explanation is generated by inferring from a rule-based system according to the level of abstraction and the reasoning traces. The computer-aided detection is conducted by IK-DCBRC, which is a multi-agent system that applies the case-based reasoning paradigm and a fuzzy similarity function for the automatic prognosis by the class of breast tumors, i.e. malignant or benign, from a pattern of cytological images. A meaningful interaction between the physician and the computer-aided diagnosis system, IK-DCBRC, is achieved via an intelligent agent. The physician can observe the trace of reasoning, terms, justifications, and the strategy to be used to decrease the risks and doubts associated with the automatic diagnosis. The capability of the system we have developed was proven by an example in which conflicts were clarified and transparency was ensured. The explanation agent ensures the transparency of the automatic diagnosis of breast cancer supported by IK-DCBRC, which decreases uncertainty and risks and detects some conflicts.

Prediction of Pathologic Fracture Risk in Activities of Daily Living and Rehabilitation of Patients With Metastatic Breast Carcinoma of the Pelvis and Femur

DTIC Science & Technology

2002-08-01

demonstrated in three-dimensional graphics and animations. This computer model will aid in planning of non-operative or operative management, rehabilitation regimens, nursing programs, and patient education .

Informatics approaches in the Biological Characterization of Adverse Outcome Pathways

EPA Science Inventory

Adverse Outcome Pathways (AOPs) are a conceptual framework to characterize toxicity pathways by a series of mechanistic steps from a molecular initiating event to population outcomes. This framework helps to direct risk assessment research, for example by aiding in computational ...

Human-human reliance in the context of automation.

PubMed

Lyons, Joseph B; Stokes, Charlene K

2012-02-01

The current study examined human-human reliance during a computer-based scenario where participants interacted with a human aid and an automated tool simultaneously. Reliance on others is complex, and few studies have examined human-human reliance in the context of automation. Past research found that humans are biased in their perceived utility of automated tools such that they view them as more accurate than humans. Prior reviews have postulated differences in human-human versus human-machine reliance, yet few studies have examined such reliance when individuals are presented with divergent information from different sources. Participants (N = 40) engaged in the Convoy Leader experiment.They selected a convoy route based on explicit guidance from a human aid and information from an automated map. Subjective and behavioral human-human reliance indices were assessed. Perceptions of risk were manipulated by creating three scenarios (low, moderate, and high) that varied in the amount of vulnerability (i.e., potential for attack) associated with the convoy routes. Results indicated that participants reduced their behavioral reliance on the human aid when faced with higher risk decisions (suggesting increased reliance on the automation); however, there were no reported differences in intentions to rely on the human aid relative to the automation. The current study demonstrated that when individuals are provided information from both a human aid and automation,their reliance on the human aid decreased during high-risk decisions. This study adds to a growing understanding of the biases and preferences that exist during complex human-human and human-machine interactions.

Computer-assisted versus conventional free fibula flap technique for craniofacial reconstruction: an outcomes comparison.

PubMed

Seruya, Mitchel; Fisher, Mark; Rodriguez, Eduardo D

2013-11-01

There has been rising interest in computer-aided design/computer-aided manufacturing for preoperative planning and execution of osseous free flap reconstruction. The purpose of this study was to compare outcomes between computer-assisted and conventional fibula free flap techniques for craniofacial reconstruction. A two-center, retrospective review was carried out on patients who underwent fibula free flap surgery for craniofacial reconstruction from 2003 to 2012. Patients were categorized by the type of reconstructive technique: conventional (between 2003 and 2009) or computer-aided design/computer-aided manufacturing (from 2010 to 2012). Demographics, surgical factors, and perioperative and long-term outcomes were compared. A total of 68 patients underwent microsurgical craniofacial reconstruction: 58 conventional and 10 computer-aided design and manufacturing fibula free flaps. By demographics, patients undergoing the computer-aided design/computer-aided manufacturing method were significantly older and had a higher rate of radiotherapy exposure compared with conventional patients. Intraoperatively, the median number of osteotomies was significantly higher (2.0 versus 1.0, p=0.002) and the median ischemia time was significantly shorter (120 minutes versus 170 minutes, p=0.004) for the computer-aided design/computer-aided manufacturing technique compared with conventional techniques; operative times were shorter for patients undergoing the computer-aided design/computer-aided manufacturing technique, although this did not reach statistical significance. Perioperative and long-term outcomes were equivalent for the two groups, notably, hospital length of stay, recipient-site infection, partial and total flap loss, and rate of soft-tissue and bony tissue revisions. Microsurgical craniofacial reconstruction using a computer-assisted fibula flap technique yielded significantly shorter ischemia times amidst a higher number of osteotomies compared with conventional techniques. Therapeutic, III.

Applying a new computer-aided detection scheme generated imaging marker to predict short-term breast cancer risk

NASA Astrophysics Data System (ADS)

Mirniaharikandehei, Seyedehnafiseh; Hollingsworth, Alan B.; Patel, Bhavika; Heidari, Morteza; Liu, Hong; Zheng, Bin

2018-05-01

This study aims to investigate the feasibility of identifying a new quantitative imaging marker based on false-positives generated by a computer-aided detection (CAD) scheme to help predict short-term breast cancer risk. An image dataset including four view mammograms acquired from 1044 women was retrospectively assembled. All mammograms were originally interpreted as negative by radiologists. In the next subsequent mammography screening, 402 women were diagnosed with breast cancer and 642 remained negative. An existing CAD scheme was applied ‘as is’ to process each image. From CAD-generated results, four detection features including the total number of (1) initial detection seeds and (2) the final detected false-positive regions, (3) average and (4) sum of detection scores, were computed from each image. Then, by combining the features computed from two bilateral images of left and right breasts from either craniocaudal or mediolateral oblique view, two logistic regression models were trained and tested using a leave-one-case-out cross-validation method to predict the likelihood of each testing case being positive in the next subsequent screening. The new prediction model yielded the maximum prediction accuracy with an area under a ROC curve of AUC  =  0.65  ±  0.017 and the maximum adjusted odds ratio of 4.49 with a 95% confidence interval of (2.95, 6.83). The results also showed an increasing trend in the adjusted odds ratio and risk prediction scores (p  <  0.01). Thus, this study demonstrated that CAD-generated false-positives might include valuable information, which needs to be further explored for identifying and/or developing more effective imaging markers for predicting short-term breast cancer risk.

COMPUTER AIDED DESIGN OF REPLACEMENT SOLVENTS UNDER VARYING ENVIRONMENTAL CONSTRAINTS

EPA Science Inventory

There is a great need to replace many solvents that are commonly used by industry and the public, but whose continued use entails a number of human health and environmental risks. One problem hampering solvent replacement is the thought that replacement, particularly for environm...

Computer-Aided Facilities Management Systems (CAFM).

ERIC Educational Resources Information Center

Cyros, Kreon L.

Computer-aided facilities management (CAFM) refers to a collection of software used with increasing frequency by facilities managers. The six major CAFM components are discussed with respect to their usefulness and popularity in facilities management applications: (1) computer-aided design; (2) computer-aided engineering; (3) decision support…

Sexually transmitted diseases, human immunodeficiency virus, and pregnancy prevention. Combined contraceptive practices among urban African-American early adolescents.

PubMed

Stanton, B F; Li, X; Galbraith, J; Feigelman, S; Kaljee, L

1996-01-01

To evaluate the success of efforts to educate youth not only to use prescription contraceptives to avoid pregnancy, but also to use condoms to avoid sexually transmitted diseases, including infection with the human immunodeficiency virus. Longitudinal study of 383 African-American youth aged 9 to 15 years enrolled in a randomized, controlled trial of an acquired immunodeficiency syndrome (AIDS) risk reduction intervention. Data about contraceptive practices were obtained at baseline and 6, 12, and 18 months later using a culturally and developmentally appropriate risk assessment tool administered with "talking" computers (Macintosh, Apple Computer Inc, Cupertino, Calif). Approximately three fourths of sexually active youth used some form of contraception in each 6-month round, with almost half of the youth using combinations of contraceptives. Among all youth at baseline and among control youth throughout the study, more than half used condoms and more than two thirds who used oral contraceptives also used condoms. Receipt of an AIDS education intervention was associated with use of more effective contraceptive practices (eg, condoms and another prescription or nonprescription method of birth control). After receiving the intervention, more than 80% of the youth who used oral contraceptives also used condoms. Contraceptive practices showed considerable stability. Knowledge about AIDS was positively associated with use of more effective contraceptive methods. Many youth are using condoms and prescription birth control simultaneously, and these use rates can be increased through AIDS education interventions.

Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics.

PubMed

Patrizi, Alfredo; Pennestrì, Ettore; Valentini, Pier Paolo

2016-01-01

The paper deals with the comparison between a high-end marker-based acquisition system and a low-cost marker-less methodology for the assessment of the human posture during working tasks. The low-cost methodology is based on the use of a single Microsoft Kinect V1 device. The high-end acquisition system is the BTS SMART that requires the use of reflective markers to be placed on the subject's body. Three practical working activities involving object lifting and displacement have been investigated. The operational risk has been evaluated according to the lifting equation proposed by the American National Institute for Occupational Safety and Health. The results of the study show that the risk multipliers computed from the two acquisition methodologies are very close for all the analysed activities. In agreement to this outcome, the marker-less methodology based on the Microsoft Kinect V1 device seems very promising to promote the dissemination of computer-aided assessment of ergonomics while maintaining good accuracy and affordable costs. PRACTITIONER’S SUMMARY: The study is motivated by the increasing interest for on-site working ergonomics assessment. We compared a low-cost marker-less methodology with a high-end marker-based system. We tested them on three different working tasks, assessing the working risk of lifting loads. The two methodologies showed comparable precision in all the investigations.

Assessment and virtual redesign of a manual handling workstation by computer-aided three-dimensional interactive application.

PubMed

Ziaei, Mansour; Ziaei, Hojjat; Hosseini, Seyed Younes; Gharagozlou, Faramarz; Keikhamoghaddam, Ali Akbar; Laybidi, Marzieh Izadi; Moradinazar, Mehdi

2017-06-01

Manual handling of bags which imposes frequent forces and stresses on body parts is a common task that many workers have to perform every day. The present study aimed to assess the postural risk and imposed forces due to manual handling and loading of sugar bags. This study was conducted on male warehouse workers of a sugar manufacturing plant. Rapid upper limb assessment (RULA) was used to assess the risks of awkward postures and computer-aided three-dimensional interactive application to estimate the forces and moments. RULA final scores were estimated to be 7 and 3 before and after the virtual redesign, respectively. Postures B and E obtained the highest compression forces and moments. The compression forces were higher than the action limit (AL) in all postures before the redesign and exceeded the maximum permissible limit (MPL) in posture E. After the redesign, these forces were reduced below the AL and MPL. Moreover, the shearing forces were lower than the AL and MPL in all postures. The main risk factors were heavy weight and poor control of sugar bags. Virtual redesign can diminish bending and twisting postures, and, therefore, some resulting forces and moments.

On the Value of Computer-aided Instruction: Thoughts after Teaching Sales Writing in a Computer Classroom.

ERIC Educational Resources Information Center

Hagge, John

1986-01-01

Focuses on problems encountered with computer-aided writing instruction. Discusses conflicts caused by the computer classroom concept, some general paradoxes and ethical implications of computer-aided instruction. (EL)

Project-Based Teaching-Learning Computer-Aided Engineering Tools

ERIC Educational Resources Information Center

Simoes, J. A.; Relvas, C.; Moreira, R.

2004-01-01

Computer-aided design, computer-aided manufacturing, computer-aided analysis, reverse engineering and rapid prototyping are tools that play an important key role within product design. These are areas of technical knowledge that must be part of engineering and industrial design courses' curricula. This paper describes our teaching experience of…

Analysis of individual risk belief structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tonn, B.E.; Travis, C.B.; Arrowood, L.

An interactive computer program developed at Oak Ridge National Laboratory is presented as a methodology to model individualized belief structures. The logic and general strategy of the model is presented for two risk topics: AIDs and toxic waste. Subjects identified desirable and undesirable consequences for each topic and formulated an associative rule linking topic and consequence in either a causal or correlational framework. Likelihood estimates, generated by subjects in several formats (probability, odds statements, etc.), constituted one outcome measure. Additionally, source of belief (personal experience, news media, etc.) and perceived personal and societal impact are reviewed. Briefly, subjects believe thatmore » AIDs causes significant emotional problems, and to a lesser degree, physical health problems whereas toxic waste causes significant environmental problems.« less

How adverse outcome pathways can aid the development and use of computational prediction models for regulatory toxicology

EPA Science Inventory

Efforts are underway to transform regulatory toxicology and chemical safety assessment from a largely empirical science based on direct observation of apical toxicity outcomes in whole organism toxicity tests to a predictive one in which outcomes and risk are inferred from accumu...

Headsprout Early Reading for Students at Risk for Reading Failure

ERIC Educational Resources Information Center

Kreskey, Donna D.

2012-01-01

This study examined the efficacy of using Headsprout Early Reading (Headsprout, 2007) to supplement a balanced literacy curriculum for kindergarten and first grade students in a suburban public school system. Headsprout, which is an example of computer aided instruction (CAI), provided internet-based, supplemental reading instruction that…

Prototype Biology-Based Radiation Risk Module Project

NASA Technical Reports Server (NTRS)

Terrier, Douglas; Clayton, Ronald G.; Patel, Zarana; Hu, Shaowen; Huff, Janice

2015-01-01

Biological effects of space radiation and risk mitigation are strategic knowledge gaps for the Evolvable Mars Campaign. The current epidemiology-based NASA Space Cancer Risk (NSCR) model contains large uncertainties (HAT #6.5a) due to lack of information on the radiobiology of galactic cosmic rays (GCR) and lack of human data. The use of experimental models that most accurately replicate the response of human tissues is critical for precision in risk projections. Our proposed study will compare DNA damage, histological, and cell kinetic parameters after irradiation in normal 2D human cells versus 3D tissue models, and it will use a multi-scale computational model (CHASTE) to investigate various biological processes that may contribute to carcinogenesis, including radiation-induced cellular signaling pathways. This cross-disciplinary work, with biological validation of an evolvable mathematical computational model, will help reduce uncertainties within NSCR and aid risk mitigation for radiation-induced carcinogenesis.

Application of modern computer-aided technologies in the production of individual bone graft: A case report.

PubMed

Mirković, Sinisa; Budak, Igor; Puskar, Tatjana; Tadić, Ana; Sokac, Mario; Santosi, Zeljko; Djurdjević-Mirković, Tatjana

2015-12-01

An autologous bone (bone derived from the patient himself) is considered to be a "golden standard" in the treatment of bone defects and partial atrophic alveolar ridge. However, large defects and bone losses are difficult to restore in this manner, because extraction of large amounts of autologous tissue can cause donor-site problems. Alternatively, data from computed tomographic (CT) scan can be used to shape a precise 3D homologous bone block using a computer-aided design-computer-aided manufacturing (CAD-CAM) system. A 63-year old male patient referred to the Clinic of Dentistry of Vojvodina in Novi Sad, because of teeth loss in the right lateral region of the lower jaw. Clinical examination revealed a pronounced resorption of the residual ridge of the lower jaw in the aforementioned region, both horizontal and vertical. After clinical examination, the patient was referred for 3D cone beam (CB)CT scan that enables visualization of bony structures and accurate measurement of dimensions of the residual alveolar ridge. Considering the large extent of bone resorption, the required ridge augmentation was more than 3 mm in height and 2 mm in width along the length of some 2 cm, thus the use of granular material was excluded. After consulting prosthodontists and engineers from the Faculty of Technical Sciences in Novi Sad we decided to fabricate an individual (custom) bovine-derived bone graft designed according to the obtained-3D CBCT scan. Application of 3D CBCT images, computer-aided systems and software in manufacturing custom bone grafts represents the most recent method of guided bone regeneration. This method substantially reduces time of recovery and carries minimum risk of postoperative complications, yet the results fully satisfy the requirements of both the patient and the therapist.

Computer-aided diagnostic strategy selection.

PubMed

Greenes, R A

1986-03-01

Determination of the optimal diagnostic work-up strategy for the patient is becoming a major concern for the practicing physician. Overlap of the indications for various diagnostic procedures, differences in their invasiveness or risk, and high costs have made physicians aware of the need to consider the choice of procedure carefully, as well as its relation to management actions available. In this article, the author discusses research approaches that aim toward development of formal decision analytic methods to allow the physician to determine optimal strategy; clinical algorithms or rules as guides to physician decisions; improved measures for characterizing the performance of diagnostic tests; educational tools for increasing the familiarity of physicians with the concepts underlying these measures and analytic procedures; and computer-based aids for facilitating the employment of these resources in actual clinical practice.

Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. of Vocational Education.

This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

Employment Opportunities for the Handicapped in Programmable Automation.

ERIC Educational Resources Information Center

Swift, Richard; Leneway, Robert

A Computer Integrated Manufacturing System may make it possible for severely disabled people to custom design, machine, and manufacture either wood or metal parts. Programmable automation merges computer aided design, computer aided manufacturing, computer aided engineering, and computer integrated manufacturing systems with automated production…

CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

ERIC Educational Resources Information Center

Havas, George D.

This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

Student Achievement in Computer Programming: Lecture vs Computer-Aided Instruction

ERIC Educational Resources Information Center

Tsai, San-Yun W.; Pohl, Norval F.

1978-01-01

This paper discusses a study of the differences in student learning achievement, as measured by four different types of common performance evaluation techniques, in a college-level computer programming course under three teaching/learning environments: lecture, computer-aided instruction, and lecture supplemented with computer-aided instruction.…

Estimation of the risk of failure for an endodontically treated maxillary premolar with MODP preparation and CAD/CAM ceramic restorations.

PubMed

Lin, Chun-Li; Chang, Yen-Hsiang; Pa, Che-An

2009-10-01

This study evaluated the risk of failure for an endodontically treated premolar with mesio occlusodistal palatal (MODP) preparation and 3 different computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic restoration configurations. Three 3-dimensional finite element (FE) models designed with CAD/CAM ceramic onlay, endocrown, and conventional crown restorations were constructed to perform simulations. The Weibull function was incorporated with FE analysis to calculate the long-term failure probability relative to different load conditions. The results indicated that the stress values on the enamel, dentin, and luting cement for endocrown restoration were the lowest values relative to the other 2 restorations. Weibull analysis revealed that the individual failure probability in the endocrown enamel, dentin, and luting cement obviously diminished more than those for onlay and conventional crown restorations. The overall failure probabilities were 27.5%, 1%, and 1% for onlay, endocrown, and conventional crown restorations, respectively, in normal occlusal condition. This numeric investigation suggests that endocrown and conventional crown restorations for endodontically treated premolars with MODP preparation present similar longevity.

Silicon Wafer Advanced Packaging (SWAP). Multichip Module (MCM) Foundry Study. Version 2

DTIC Science & Technology

1991-04-08

Next Layer Dielectric Spacing - Additional Metal Thickness Impact on Dielectric Uniformity/Adhiesion. The first step in .!Ie EPerimental design would be... design CAM - computer aided manufacturing CAE - computer aided engineering CALCE - computer aided life cycle engineering center CARMA - computer aided...expansion 5 j- CVD - chemical vapor deposition J . ..- j DA - design automation J , DEC - Digital Equipment Corporation --- DFT - design for testability

The application of computer-aided technologies in automotive styling design

NASA Astrophysics Data System (ADS)

Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

2012-04-01

In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

Integrity management of offshore structures and its implication on computation of structural action effects and resistance

NASA Astrophysics Data System (ADS)

Moan, T.

2017-12-01

An overview of integrity management of offshore structures, with emphasis on the oil and gas energy sector, is given. Based on relevant accident experiences and means to control the associated risks, accidents are categorized from a technical-physical as well as human and organizational point of view. Structural risk relates to extreme actions as well as structural degradation. Risk mitigation measures, including adequate design criteria, inspection, repair and maintenance as well as quality assurance and control of engineering processes, are briefly outlined. The current status of risk and reliability methodology to aid decisions in the integrity management is briefly reviewed. Finally, the need to balance the uncertainties in data, methods and computational efforts and the cautious use and quality assurance and control in applying high fidelity methods to avoid human errors, is emphasized, and with a plea to develop both high fidelity as well as efficient, simplified methods for design.

Developing a new case based computer-aided detection scheme and an adaptive cueing method to improve performance in detecting mammographic lesions

PubMed Central

Tan, Maxine; Aghaei, Faranak; Wang, Yunzhi; Zheng, Bin

2017-01-01

The purpose of this study is to evaluate a new method to improve performance of computer-aided detection (CAD) schemes of screening mammograms with two approaches. In the first approach, we developed a new case based CAD scheme using a set of optimally selected global mammographic density, texture, spiculation, and structural similarity features computed from all four full-field digital mammography (FFDM) images of the craniocaudal (CC) and mediolateral oblique (MLO) views by using a modified fast and accurate sequential floating forward selection feature selection algorithm. Selected features were then applied to a “scoring fusion” artificial neural network (ANN) classification scheme to produce a final case based risk score. In the second approach, we combined the case based risk score with the conventional lesion based scores of a conventional lesion based CAD scheme using a new adaptive cueing method that is integrated with the case based risk scores. We evaluated our methods using a ten-fold cross-validation scheme on 924 cases (476 cancer and 448 recalled or negative), whereby each case had all four images from the CC and MLO views. The area under the receiver operating characteristic curve was AUC = 0.793±0.015 and the odds ratio monotonically increased from 1 to 37.21 as CAD-generated case based detection scores increased. Using the new adaptive cueing method, the region based and case based sensitivities of the conventional CAD scheme at a false positive rate of 0.71 per image increased by 2.4% and 0.8%, respectively. The study demonstrated that supplementary information can be derived by computing global mammographic density image features to improve CAD-cueing performance on the suspicious mammographic lesions. PMID:27997380

Enhancing an appointment diary on a pocket computer for use by people after brain injury.

PubMed

Wright, P; Rogers, N; Hall, C; Wilson, B; Evans, J; Emslie, H

2001-12-01

People with memory loss resulting from brain injury benefit from purpose-designed memory aids such as appointment diaries on pocket computers. The present study explores the effects of extending the range of memory aids and including games. For 2 months, 12 people who had sustained brain injury were loaned a pocket computer containing three purpose-designed memory aids: diary, notebook and to-do list. A month later they were given another computer with the same memory aids but a different method of text entry (physical keyboard or touch-screen keyboard). Machine order was counterbalanced across participants. Assessment was by interviews during the loan periods, rating scales, performance tests and computer log files. All participants could use the memory aids and ten people (83%) found them very useful. Correlations among the three memory aids were not significant, suggesting individual variation in how they were used. Games did not increase use of the memory aids, nor did loan of the preferred pocket computer (with physical keyboard). Significantly more diary entries were made by people who had previously used other memory aids, suggesting that a better understanding of how to use a range of memory aids could benefit some people with brain injury.

Real-time assessment and neuromuscular training feedback techniques to prevent ACL injury in female athletes

PubMed Central

Myer, Gregory D.; Brent, Jensen L.; Ford, Kevin R.; Hewett, Timothy E.

2011-01-01

Lead Summary Some athletes may be more susceptible to at-risk knee positions during sports activities, but the underlying causes are not clearly defined. This manuscripts synthesizes in vivo, in vitro and in-silica (computer simulated) data to delineate likely risk factors to the mechanism(s) of non-contact ACL injuries. From these identified risk factors, we will discuss newly developed real-time screening techniques that can be used in training sessions to identify modifiable risk factors. Techniques provided will target and correct altered mechanics which may reduce or eliminate risk factors and aid in the prevention of non-contact ACL injuries in high risk athletes. PMID:21643474

The microcomputer in the dental office: a new diagnostic aid.

PubMed

van der Stelt, P F

1985-06-01

The first computer applications in the dental office were based upon standard accountancy procedures. Recently, more and more computer applications have become available to meet the specific requirements of dental practice. This implies not only business procedures, but also facilities to store patient records in the system and retrieve them easily. Another development concerns the automatic calculation of diagnostic data such as those provided in cephalometric analysis. Furthermore, growth and surgical results in the craniofacial area can be predicted by computerized extrapolation. Computers have been useful in obtaining the patient's anamnestic data objectively and for the making of decisions based on such data. Computer-aided instruction systems have been developed for undergraduate students to bridge the gap between textbook and patient interaction without the risks inherent in the latter. Radiology will undergo substantial changes as a result of the application of electronic imaging devices instead of the conventional radiographic films. Computer-assisted electronic imaging will enable image processing, image enhancement, pattern recognition and data transmission for consultation and storage purposes. Image processing techniques will increase image quality whilst still allowing low-dose systems. Standardization of software and system configuration and the development of 'user friendly' programs is the major concern for the near future.

A computer-assisted motivational social network intervention to reduce alcohol, drug and HIV risk behaviors among Housing First residents.

PubMed

Kennedy, David P; Hunter, Sarah B; Chan Osilla, Karen; Maksabedian, Ervant; Golinelli, Daniela; Tucker, Joan S

2016-03-15

Individuals transitioning from homelessness to housing face challenges to reducing alcohol, drug and HIV risk behaviors. To aid in this transition, this study developed and will test a computer-assisted intervention that delivers personalized social network feedback by an intervention facilitator trained in motivational interviewing (MI). The intervention goal is to enhance motivation to reduce high risk alcohol and other drug (AOD) use and reduce HIV risk behaviors. In this Stage 1b pilot trial, 60 individuals that are transitioning from homelessness to housing will be randomly assigned to the intervention or control condition. The intervention condition consists of four biweekly social network sessions conducted using MI. AOD use and HIV risk behaviors will be monitored prior to and immediately following the intervention and compared to control participants' behaviors to explore whether the intervention was associated with any systematic changes in AOD use or HIV risk behaviors. Social network health interventions are an innovative approach for reducing future AOD use and HIV risk problems, but little is known about their feasibility, acceptability, and efficacy. The current study develops and pilot-tests a computer-assisted intervention that incorporates social network visualizations and MI techniques to reduce high risk AOD use and HIV behaviors among the formerly homeless. CLINICALTRIALS. NCT02140359.

Computer-aided design and computer science technology

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Voigt, S. J.

1976-01-01

A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

Computer Instructional Aids for Undergraduate Control Education.

ERIC Educational Resources Information Center

Volz, Richard A.; And Others

Engineering is coming to rely more and more heavily upon the computer for computations, analyses, and graphic displays which aid the design process. A general purpose simulation system, the Time-shared Automatic Control Laboratory (TACL), and a set of computer-aided design programs, Control Oriented Interactive Graphic Analysis and Design…

Evaluation of Microcomputer-Based Operation and Maintenance Management Systems for Army Water/Wastewater Treatment Plant Operation.

DTIC Science & Technology

1986-07-01

COMPUTER-AIDED OPERATION MANAGEMENT SYSTEM ................. 29 Functions of an Off-Line Computer-Aided Operation Management System Applications of...System Comparisons 85 DISTRIBUTION 5V J. • 0. FIGURES Number Page 1 Hardware Components 21 2 Basic Functions of a Computer-Aided Operation Management System...Plant Visits 26 4 Computer-Aided Operation Management Systems Reviewed for Analysis of Basic Functions 29 5 Progress of Software System Installation and

The Two-By-Two Array: An Aid in Conceptualization and Problem Solving

ERIC Educational Resources Information Center

Eberhart, James

2004-01-01

The fields of mathematics, science, and engineering are replete with diagrams of many varieties. They range in nature from the Venn diagrams of symbolic logic to the Periodic Chart of the Elements; and from the fault trees of risk assessment to the flow charts used to describe laboratory procedures, industrial processes, and computer programs. All…

The Feasibility of Classifying Breast Masses Using a Computer-Assisted Diagnosis (CAD) System Based on Ultrasound Elastography and BI-RADS Lexicon.

PubMed

Fleury, Eduardo F C; Gianini, Ana Claudia; Marcomini, Karem; Oliveira, Vilmar

2018-01-01

To determine the applicability of a computer-aided diagnostic system strain elastography system for the classification of breast masses diagnosed by ultrasound and scored using the criteria proposed by the breast imaging and reporting data system ultrasound lexicon and to determine the diagnostic accuracy and interobserver variability. This prospective study was conducted between March 1, 2016, and May 30, 2016. A total of 83 breast masses subjected to percutaneous biopsy were included. Ultrasound elastography images before biopsy were interpreted by 3 radiologists with and without the aid of computer-aided diagnostic system for strain elastography. The parameters evaluated by each radiologist results were sensitivity, specificity, and diagnostic accuracy, with and without computer-aided diagnostic system for strain elastography. Interobserver variability was assessed using a weighted κ test and an intraclass correlation coefficient. The areas under the receiver operating characteristic curves were also calculated. The areas under the receiver operating characteristic curve were 0.835, 0.801, and 0.765 for readers 1, 2, and 3, respectively, without computer-aided diagnostic system for strain elastography, and 0.900, 0.926, and 0.868, respectively, with computer-aided diagnostic system for strain elastography. The intraclass correlation coefficient between the 3 readers was 0.6713 without computer-aided diagnostic system for strain elastography and 0.811 with computer-aided diagnostic system for strain elastography. The proposed computer-aided diagnostic system for strain elastography system has the potential to improve the diagnostic performance of radiologists in breast examination using ultrasound associated with elastography.

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

ERIC Educational Resources Information Center

Stewart, John Christopher

Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

Systemic Inflammation-Based Biomarkers and Survival in HIV-Positive Subject With Solid Cancer in an Italian Multicenter Study.

PubMed

Raffetti, Elena; Donato, Francesco; Pezzoli, Chiara; Digiambenedetto, Simona; Bandera, Alessandra; Di Pietro, Massimo; Di Filippo, Elisa; Maggiolo, Franco; Sighinolfi, Laura; Fornabaio, Chiara; Castelnuovo, Filippo; Ladisa, Nicoletta; Castelli, Francesco; Quiros Roldan, Eugenia

2015-08-15

Recently, some systemic inflammation-based biomarkers have been demonstrated useful for predicting risk of death in patients with solid cancer independently of tumor characteristics. This study aimed to investigate the prognostic role of systemic inflammation-based biomarkers in HIV-infected patients with solid tumors and to propose a risk score for mortality in these subjects. Clinical and pathological data on solid AIDS-defining cancer (ADC) and non-AIDS-defining cancer (NADC), diagnosed between 1998 and 2012 in an Italian cohort, were analyzed. To evaluate the prognostic role of systemic inflammation- and nutrition-based markers, univariate and multivariable Cox regression models were applied. To compute the risk score equation, the patients were randomly assigned to a derivation and a validation sample. A total of 573 patients (76.3% males) with a mean age of 46.2 years (SD = 10.3) were enrolled. 178 patients died during a median of 3.2 years of follow-up. For solid NADCs, elevated Glasgow Prognostic Score, modified Glasgow Prognostic Score, neutrophil/lymphocyte ratio, platelet/lymphocyte ratio, and Prognostic Nutritional Index were independently associated with risk of death; for solid ADCs, none of these markers was associated with risk of death. For solid NADCs, we computed a mortality risk score on the basis of age at cancer diagnosis, intravenous drug use, and Prognostic Nutritional Index. The areas under the receiver operating characteristic curve were 0.67 (95% confidence interval: 0.58 to 0.75) in the derivation sample and 0.66 (95% confidence interval: 0.54 to 0.79) in the validation sample. Inflammatory biomarkers were associated with risk of death in HIV-infected patients with solid NADCs but not with ADCs.

An interactive multimedia program to prevent HIV transmission in men with intellectual disability.

PubMed

Wells, Jennifer; Clark, Khaya; Sarno, Karen

2014-05-01

The efficacy of a computer-based interactive multimedia HIV/AIDS prevention program for men with intellectual disability (ID) was examined using a quasi-experimental within-subjects design. Thirty-seven men with mild to moderate intellectual disability evaluated the program. The pretest and posttest instruments assessed HIV/AIDS knowledge (high-risk fluids, HIV transmission, and condom facts) and condom application skills. All outcome measures showed statistically significant gains from pretest to posttest, with medium to large effect sizes. In addition, a second study was conducted with twelve service providers who work with men with ID. Service providers reviewed the HIV/AIDS prevention program, completed a demographics questionnaire, and a program satisfaction survey. Overall, service providers rated the program highly on several outcome measures (stimulation, relevance, and usability).

Familial associations of lymphoma and myeloma with autoimmune diseases

PubMed Central

Hemminki, K; Försti, A; Sundquist, K; Sundquist, J; Li, X

2017-01-01

Many B-cell neoplasms are associated with autoimmune diseases (AIDs) but most evidence is based on a personal rather than a family history of AIDs. Here we calculated risks for non-Hodgkin lymphoma (NHL), Hodgkin lymphoma (HL) and multiple myeloma (MM) when family members were diagnosed with any of 44 different AIDs, or, independently, risk for AIDs when family members were diagnosed with a neoplasm. A total of 64 418 neoplasms and 531 155 AIDs were identified from Swedish nationwide health care records. NHL was associated with a family history of five AIDs, all increasing the risk, HL was associated with one AID increasing and three AIDs decreasing the risk while MM had no association. A family history of NHL was associated with eight, HL with seven and MM with seven different AIDs, nine increasing and 13 decreasing the risk. The present family data on B-cell neoplasms and AIDs show an approximately equal number of associations for risk increase and risk decrease, suggesting that inherited genes or gene-environment interactions may increase the risk or be protective. These results differed from published data on personal history of AID, which only report increased risks, often vastly higher and for different AIDs compared with the present data. PMID:28157190

Computer-Aided Drug Discovery: Molecular Docking of Diminazene Ligands to DNA Minor Groove

ERIC Educational Resources Information Center

Kholod, Yana; Hoag, Erin; Muratore, Katlynn; Kosenkov, Dmytro

2018-01-01

The reported project-based laboratory unit introduces upper-division undergraduate students to the basics of computer-aided drug discovery as a part of a computational chemistry laboratory course. The students learn to perform model binding of organic molecules (ligands) to the DNA minor groove with computer-aided drug discovery (CADD) tools. The…

Educational software for simulating risk of HIV infection

NASA Astrophysics Data System (ADS)

Rothberg, Madeleine A.; Sandberg, Sonja; Awerbuch, Tamara E.

1994-03-01

The AIDS epidemic is still growing rapidly and the disease is thought to be uniformly fatal. With no vaccine or cure in sight, education during high school years is a critical component in the prevention of AIDS. We propose the use of computer software with which high school students can explore via simulation their own risk of acquiring an HIV infection given certain sexual behaviors. This particular software is intended to help students understand the three factors that determine their risk of HIV infection (number of sexual acts, probability that their partners are infected, and riskiness of the specific sexual activities they choose). Users can explicitly calculate their own chances of becoming infected based on decisions they make. Use of the program is expected to personalize the risk of HIV infection and thus increase users' concern and awareness. Behavioral change may not result from increased knowledge alone. Therefore the effectiveness of this program in changing attitudes toward risky sexual behaviors would be enhanced when the simulation is embedded in an appropriate curriculum. A description of the program and an example of its use are presented.

Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

[Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

PubMed

Wei, Xuelei; Dong, Fuhui

2011-12-01

To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

The Impact of Machine Translation and Computer-aided Translation on Translators

NASA Astrophysics Data System (ADS)

Peng, Hao

2018-03-01

Under the context of globalization, communications between countries and cultures are becoming increasingly frequent, which make it imperative to use some techniques to help translate. This paper is to explore the influence of computer-aided translation on translators, which is derived from the field of the computer-aided translation (CAT) and machine translation (MT). Followed by an introduction to the development of machine and computer-aided translation, it then depicts the technologies practicable to translators, which are trying to analyze the demand of designing the computer-aided translation so far in translation practice, and optimize the designation of computer-aided translation techniques, and analyze its operability in translation. The findings underline the advantages and disadvantages of MT and CAT tools, and the serviceability and future development of MT and CAT technologies. Finally, this thesis probes into the impact of these new technologies on translators in hope that more translators and translation researchers can learn to use such tools to improve their productivity.

Systems Engineering and Integration (SE and I)

NASA Technical Reports Server (NTRS)

Chevers, ED; Haley, Sam

1990-01-01

The issue of technology advancement and future space transportation vehicles is addressed. The challenge is to develop systems which can be evolved and improved in small incremental steps where each increment reduces present cost, improves, reliability, or does neither but sets the stage for a second incremental upgrade that does. Future requirements are interface standards for commercial off the shelf products to aid in the development of integrated facilities; enhanced automated code generation system slightly coupled to specification and design documentation; modeling tools that support data flow analysis; and shared project data bases consisting of technical characteristics cast information, measurement parameters, and reusable software programs. Topics addressed include: advanced avionics development strategy; risk analysis and management; tool quality management; low cost avionics; cost estimation and benefits; computer aided software engineering; computer systems and software safety; system testability; and advanced avionics laboratories - and rapid prototyping. This presentation is represented by viewgraphs only.

Poverty, AIDS and child health: identifying highest-risk children in South Africa.

PubMed

Cluver, Lucie; Boyes, Mark; Orkin, Mark; Sherr, Lorraine

2013-10-11

Identifying children at the highest risk of negative health effects is a prerequisite to effective public health policies in Southern Africa. A central ongoing debate is whether poverty, orphanhood or parental AIDS most reliably indicates child health risks. Attempts to address this key question have been constrained by a lack of data allowing distinction of AIDS-specific parental death or morbidity from other causes of orphanhood and chronic illness. To examine whether household poverty, orphanhood and parental illness (by AIDS or other causes) independently or interactively predict child health, developmental and HIV-infection risks. We interviewed 6 002 children aged 10 - 17 years in 2009 - 2011, using stratified random sampling in six urban and rural sites across three South African provinces. Outcomes were child mental health risks, educational risks and HIV-infection risks. Regression models that controlled for socio-demographic co-factors tested potential impacts and interactions of poverty, AIDS-specific and other orphanhood and parental illness status. Household poverty independently predicted child mental health and educational risks, AIDS orphanhood independently predicted mental health risks and parental AIDS illness independently predicted mental health, educational and HIV-infection risks. Interaction effects of poverty with AIDS orphanhood and parental AIDS illness were found across all outcomes. No effects, or interactions with poverty, were shown by AIDS-unrelated orphanhood or parental illness. The identification of children at highest risk requires recognition and measurement of both poverty and parental AIDS. This study shows negative impacts of poverty and AIDS-specific vulnerabilities distinct from orphanhood and adult illness more generally. Additionally, effects of interaction between family AIDS and poverty suggest that, where these co-exist, children are at highest risk of all.

Attributes Affecting Computer-Aided Decision Making--A Literature Survey.

ERIC Educational Resources Information Center

Moldafsky, Neil I; Kwon, Ik-Whan

1994-01-01

Reviews current literature about personal, demographic, situational, and cognitive attributes that affect computer-aided decision making. The effectiveness of computer-aided decision making is explored in relation to decision quality, effectiveness, and confidence. Studies of the effects of age, anxiety, cognitive type, attitude, gender, and prior…

User-Centered Computer Aided Language Learning

ERIC Educational Resources Information Center

Zaphiris, Panayiotis, Ed.; Zacharia, Giorgos, Ed.

2006-01-01

In the field of computer aided language learning (CALL), there is a need for emphasizing the importance of the user. "User-Centered Computer Aided Language Learning" presents methodologies, strategies, and design approaches for building interfaces for a user-centered CALL environment, creating a deeper understanding of the opportunities and…

Hearing Impairments. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on advances in electronic aids, computers, telecommunications, and videodiscs to assist students with hearing impairments. Electronic aids include hearing aids, telephone devices for the deaf, teletypes, closed captioning systems for television, and…

Computer Aided Design in Engineering Education.

ERIC Educational Resources Information Center

Gobin, R.

1986-01-01

Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.

PubMed

Yoon, Hyung-In; Han, Jung-Suk

2016-02-01

The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Computers in Manufacturing.

ERIC Educational Resources Information Center

Hudson, C. A.

1982-01-01

Advances in factory computerization (computer-aided design and computer-aided manufacturing) are reviewed, including discussions of robotics, human factors engineering, and the sociological impact of automation. (JN)

Baseline study and risk analysis of landfill leachate - Current state-of-the-science of computer aided approaches.

PubMed

Butt, T E; Alam, A; Gouda, H M; Paul, P; Mair, N

2017-02-15

For the successful completion of a risk analysis process, its foundation (i.e. a baseline study) has to be well established. For this purpose, a baseline study needs to be more integrated than ever, particularly when environmental legislation is increasingly becoming stringent and integrated. This research investigates and concludes that no clear evidence of computer models for baseline study has been found in a whole-system and integrated format, which risk assessors could readily and effectively use to underpin risk analyses holistically and yet specifically for landfill leachate. This is established on the basis of investigation of software packages that are particularly closely related to landfills. Holistic baseline study is also defined along with its implications and in the context of risk assessment of landfill leachate. The study also indicates a number of factors and features that need to be added to baseline study in order to render it more integrated thereby enhancing risk analyses for landfill leachate. Copyright © 2016 Elsevier B.V. All rights reserved.

A critical comparison of clinical decision instruments for computed tomographic scanning in mild closed traumatic brain injury in adolescents and adults.

PubMed

Stein, Sherman C; Fabbri, Andrea; Servadei, Franco; Glick, Henry A

2009-02-01

A number of clinical decision aids have been introduced to limit unnecessary computed tomographic scans in patients with mild traumatic brain injury. These aids differ in the risk factors they use to recommend a scan. We compare the instruments according to their sensitivity and specificity and recommend ones based on incremental benefit of correctly classifying patients as having surgical, nonsurgical, or no intracranial lesions. We performed a secondary analysis of prospectively collected database from 7,955 patients aged 10 years or older with mild traumatic brain injury to compare sensitivity and specificity of 6 common clinical decision strategies: the Canadian CT Head Rule, the Neurotraumatology Committee of the World Federation of Neurosurgical Societies, the New Orleans, the National Emergency X-Radiography Utilization Study II (NEXUS-II), the National Institute of Clinical Excellence guideline, and the Scandinavian Neurotrauma Committee guideline. Excluded from the database were patients for whom the history of trauma was unclear, the initial Glasgow Coma Scale score was less than 14, the injury was penetrating, vital signs were unstable, or who refused diagnostic tests. Patients revisiting the emergency department within 7 days were counted only once. The percentage of scans that would have been required by applying each of the 6 aids were Canadian CT head rule (high risk only) 53%, Canadian (medium & high risk) 56%, the Neurotraumatology Committee of the World Federation of Neurosurgical Societies 56%, New Orleans 69%, NEXUS-II 56%, National Institute of Clinical Excellence 71%, and the Scandinavian 50%. The 6 decision aids' sensitivities for surgical hematomas could not be distinguished statistically (P>.05). Sensitivity was 100% (95% confidence interval [CI] 96% to 100%) for NEXUS-II, 98.1% (95% CI 93% to 100%) for National Institute of Clinical Excellence, and 99.1% (95% CI 94% to 100%) for the other 4 clinical decision instruments. Sensitivity for any intracranial lesion ranged from 95.7% (95% CI 93% to 97%) (Scandinavian) to 100% (95% CI 98% to 100%) (National Institute of Clinical Excellence). In contrast, specificities varied between 30.9% (95% CI 30% to 32%) (National Institute of Clinical Excellence) and 52.9% (95% CI 52% to 54) (Scandinavian). NEXUS-II and the Scandinavian clinical decision aids displayed the best combination of sensitivity and specificity in this patient population. However, we cannot demonstrate that the higher sensitivity of NEXUS-II for surgical hematomas is statistically significant. Therefore, choosing which of the 2 clinical decision instruments to use must be based on decisionmakers' attitudes toward risk.

Contextual Mediators influencing the Effectiveness of Behavioural Change Interventions: A Case of HIV/AIDS Prevention Behaviours

PubMed Central

Musiimenta, Angella

2012-01-01

Background: Although Uganda had recorded declines in HIV infection rates around 1990’s, it is argued that HIV/AIDS risk sexual behaviour, especially among the youth, started increasing again from early 2000. School-based computer-assisted HIV interventions can provide interactive ways of improving the youth’s HIV knowledge, attitudes and skills. However, these interventions have long been reported to have limited success in improving the youth’s sexual behaviours, which is always the major aim of implementing such interventions. This could be because the commonly used health promotion theories employed by these interventions have limited application in HIV prevention. These theories tend to lack sufficient attention to contextual mediators that influence ones sexual behaviours. Moreover, literature increasingly expresses dissatisfaction with the dominant prevailing descriptive survey-type HIV/AIDS-related research. Objective and Methods: The objective of this research was to identify contextual mediators that influence the youth’s decision to adopt and maintain the HIV/AIDS preventive behaviour advocated by a computer-assisted intervention. To achieve this objective, this research employed qualitative method, which provided in-depth understanding of how different contexts interact to influence the effectiveness of HIV/AIDS interventions. The research question was: What contextual mediators are influencing the youth’s decision to adopt and maintain the HIV/AIDS preventive behaviour advocated by a computer-assisted intervention? To answer this research question, 20 youth who had previously completed the WSWM intervention when they were still in secondary schools were telephone interviewed between Sept.08 and Dec.08. The collected data was then analysed, based on grounded theory’s coding scheme. Results: Findings demonstrate that although often ignored by HIV interventionists and researchers, variety of contextual mediators influence individual uptake of HIV preventives. These include relationship characteristics, familial mediators, peer influence, gender-based social norms, economic factors and religious beliefs. Conclusion: To generate concomitant mutual efforts, rather than exclusively focusing on individual level mediators, there is an urgent need to shift to integrative approaches, which combine individual level change strategies with contextual level change approaches in the design and implementation of interventional strategies to fight against HIV/AIDS. PMID:23569636

CANARY Risk Management of Adenocarcinoma: The Future of Imaging?

PubMed Central

Foley, Finbar; Rajagopalan, Srinivasan; Raghunath, Sushravya M; Boland, Jennifer M; Karwoski, Ronald A.; Maldonado, Fabien; Bartholmai, Brian J; Peikert, Tobias

2016-01-01

Increased clinical utilization of chest high resolution computed tomography results in increased identification of lung adenocarcinomas and persistent sub-solid opacities. However, these lesions range from very indolent to extremely aggressive tumors. Clinically relevant diagnostic tools to non-invasively risk stratify and guide individualized management of these lesions are lacking. Research efforts investigating semi-quantitative measures to decrease inter- and intra-rater variability are emerging, and in some cases steps have been taken to automate this process. However, many such methods currently are still sub-optimal, require validation and are not yet clinically applicable. The Computer-Aided Nodule Assessment and Risk Yield (CANARY) software application represents a validated tool for the automated, quantitative, non-invasive tool for risk stratification of adenocarcinoma lung nodules. CANARY correlates well with consensus histology and post-surgical patient outcomes and therefore may help to guide individualized patient management e.g. in identification of nodules amenable to radiological surveillance, or in need of adjunctive therapy. PMID:27568149

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

ERIC Educational Resources Information Center

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

ERIC Educational Resources Information Center

Gosman, A. D.; And Others

1979-01-01

Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

Computer-Presented Organizational/Memory Aids as Instruction for Solving Pico-Fomi Problems.

ERIC Educational Resources Information Center

Steinberg, Esther R.; And Others

1985-01-01

Describes investigation of effectiveness of computer-presented organizational/memory aids (matrix and verbal charts controlled by computer or learner) as instructional technique for solving Pico-Fomi problems, and the acquisition of deductive inference rules when such aids are present. Results indicate chart use control should be adapted to…

Factors associated with parent-child communication about HIV/AIDS in the United States and Kenya: a cross-cultural comparison.

PubMed

Poulsen, Melissa N; Miller, Kim S; Lin, Carol; Fasula, Amy; Vandenhoudt, Hilde; Wyckoff, Sarah C; Ochura, Juliet; Obong'o, Christopher O; Forehand, Rex

2010-10-01

This study explored parent-child communication about HIV/AIDS among two populations disproportionately affected by HIV. Similar computer-assisted surveys were completed by parents of pre-teens, including 1,115 African American parents of 9-12-year-old children in southeastern US and 403 parents of 10-12-year-old children in Nyanza Province, Kenya. Multivariate analyses identified factors associated with parental report of ever talking to their child about HIV/AIDS. Twenty-nine percent of US parents and 40% in Kenya had never talked to their pre-teen about HIV/AIDS. In both countries, communication was more likely if parents perceived their child to be ready to learn about sex topics, had gotten information to educate their child about sex, and had greater sexual communication responsiveness (skill, comfort, and confidence communicating about sexuality). Programs are needed that help parents assess children's readiness to learn about sexual issues; access accurate information about adolescent sexual risks; and acquire the responsiveness needed to discuss sexual issues, including HIV/AIDS.

Computer-aided design development transition for IPAD environment

NASA Technical Reports Server (NTRS)

Owens, H. G.; Mock, W. D.; Mitchell, J. C.

1980-01-01

The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

Quantitative CT analysis of honeycombing area in idiopathic pulmonary fibrosis: Correlations with pulmonary function tests.

PubMed

Nakagawa, Hiroaki; Nagatani, Yukihiro; Takahashi, Masashi; Ogawa, Emiko; Tho, Nguyen Van; Ryujin, Yasushi; Nagao, Taishi; Nakano, Yasutaka

2016-01-01

The 2011 official statement of idiopathic pulmonary fibrosis (IPF) mentions that the extent of honeycombing and the worsening of fibrosis on high-resolution computed tomography (HRCT) in IPF are associated with the increased risk of mortality. However, there are few reports about the quantitative computed tomography (CT) analysis of honeycombing area. In this study, we first proposed a computer-aided method for quantitative CT analysis of honeycombing area in patients with IPF. We then evaluated the correlations between honeycombing area measured by the proposed method with that estimated by radiologists or with parameters of PFTs. Chest HRCTs and pulmonary function tests (PFTs) of 36 IPF patients, who were diagnosed using HRCT alone, were retrospectively evaluated. Two thoracic radiologists independently estimated the honeycombing area as Identified Area (IA) and the percentage of honeycombing area to total lung area as Percent Area (PA) on 3 axial CT slices for each patient. We also developed a computer-aided method to measure the honeycombing area on CT images of those patients. The total honeycombing area as CT honeycombing area (HA) and the percentage of honeycombing area to total lung area as CT %honeycombing area (%HA) were derived from the computer-aided method for each patient. HA derived from three CT slices was significantly correlated with IA (ρ=0.65 for Radiologist 1 and ρ=0.68 for Radiologist 2). %HA derived from three CT slices was also significantly correlated with PA (ρ=0.68 for Radiologist 1 and ρ=0.70 for Radiologist 2). HA and %HA derived from all CT slices were significantly correlated with FVC (%pred.), DLCO (%pred.), and the composite physiologic index (CPI) (HA: ρ=-0.43, ρ=-0.56, ρ=0.63 and %HA: ρ=-0.60, ρ=-0.49, ρ=0.69, respectively). The honeycombing area measured by the proposed computer-aided method was correlated with that estimated by expert radiologists and with parameters of PFTs. This quantitative CT analysis of honeycombing area may be useful and reliable in patients with IPF. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

CAD/CAE Integration Enhanced by New CAD Services Standard

NASA Technical Reports Server (NTRS)

Claus, Russell W.

2002-01-01

A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

Investigations in Computer-Aided Instruction and Computer-Aided Controls. Final Report.

ERIC Educational Resources Information Center

Rosenberg, R.C.; And Others

These research projects, designed to delve into certain relationships between humans and computers, are focused on computer-assisted instruction and on man-computer interaction. One study demonstrates that within the limits of formal engineering theory, a computer simulated laboratory (Dynamic Systems Laboratory) can be built in which freshmen…

Computer Numerical Control: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Sinn, John W.

This instructional manual contains five learning activity packets for use in a workshop on computer numerical control for computer-aided manufacturing. The lessons cover the following topics: introduction to computer-aided manufacturing, understanding the lathe, using the computer, computer numerically controlled part programming, and executing a…

Software and resources for computational medicinal chemistry

PubMed Central

Liao, Chenzhong; Sitzmann, Markus; Pugliese, Angelo; Nicklaus, Marc C

2011-01-01

Computer-aided drug design plays a vital role in drug discovery and development and has become an indispensable tool in the pharmaceutical industry. Computational medicinal chemists can take advantage of all kinds of software and resources in the computer-aided drug design field for the purposes of discovering and optimizing biologically active compounds. This article reviews software and other resources related to computer-aided drug design approaches, putting particular emphasis on structure-based drug design, ligand-based drug design, chemical databases and chemoinformatics tools. PMID:21707404

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

PubMed

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

[Clinical skills and outcomes of chair-side computer aided design and computer aided manufacture system].

PubMed

Yu, Q

2018-04-09

Computer aided design and computer aided manufacture (CAD/CAM) technology is a kind of oral digital system which is applied to clinical diagnosis and treatment. It overturns the traditional pattern, and provides a solution to restore defect tooth quickly and efficiently. In this paper we mainly discuss the clinical skills of chair-side CAD/CAM system, including tooth preparation, digital impression, the three-dimensional design of prosthesis, numerical control machining, clinical bonding and so on, and review the outcomes of several common kinds of materials at the same time.

Using Additive Manufacturing to Mitigate the Risks of Limited Key Ship Components of the Zumwalt-Class Destroyer

DTIC Science & Technology

2016-12-01

4 3. Design and Production Maturity...issues (PEO Ships, 2016). 6 3. Design and Production Maturity Despite the fact that the Navy accepted the first ship, USS Zumwalt (DDG 1000...The modern day of AM is a process that uses Computer-Aided Design (CAD) software to create three-dimensional (3D) products by adding one layer on top

Machine vision based teleoperation aid

NASA Technical Reports Server (NTRS)

Hoff, William A.; Gatrell, Lance B.; Spofford, John R.

1991-01-01

When teleoperating a robot using video from a remote camera, it is difficult for the operator to gauge depth and orientation from a single view. In addition, there are situations where a camera mounted for viewing by the teleoperator during a teleoperation task may not be able to see the tool tip, or the viewing angle may not be intuitive (requiring extensive training to reduce the risk of incorrect or dangerous moves by the teleoperator). A machine vision based teleoperator aid is presented which uses the operator's camera view to compute an object's pose (position and orientation), and then overlays onto the operator's screen information on the object's current and desired positions. The operator can choose to display orientation and translation information as graphics and/or text. This aid provides easily assimilated depth and relative orientation information to the teleoperator. The camera may be mounted at any known orientation relative to the tool tip. A preliminary experiment with human operators was conducted and showed that task accuracies were significantly greater with than without this aid.

Differences in gay men's AIDS risk knowledge and behavior patterns in high and low AIDS prevalence cities.

PubMed

St Lawrence, J S; Hood, H V; Brasfield, T; Kelly, J A

1989-01-01

Several studies have found reductions in acquired immunodeficiency syndrome (AIDS) risk practices among gay men in high AIDS-prevalence cities since the start of the AIDS crisis. Much less is known about risk behavior patterns among gay men in smaller cities, where AIDS cases are less common and the prevalence of human immunodeficiency virus infection is relatively lower. In the study, men entering gay bars in three cities, one large and two small, completed anonymous surveys of sexual practices and AIDS risk knowledge. Men in high AIDS-prevalence areas were found to have had a greater number of sexual partners, were more knowledgeable about AIDS, were much more likely to engage in low-risk practices (such as mutual masturbation or body rubbing), and had unprotected anal intercourse less frequently than gay men in smaller cities. The most common sexual activity among gay men in the larger city was mutual masturbation, a low-risk practice. The most common sexual activity among gay men in the smaller cities was unprotected anal intercourse. Increased efforts are needed to educate gay men and to promote risk behavior changes among those living in smaller cities and in communities outside the prominent AIDS epicenters.

Medical imaging and computers in the diagnosis of breast cancer

NASA Astrophysics Data System (ADS)

Giger, Maryellen L.

2014-09-01

Computer-aided diagnosis (CAD) and quantitative image analysis (QIA) methods (i.e., computerized methods of analyzing digital breast images: mammograms, ultrasound, and magnetic resonance images) can yield novel image-based tumor and parenchyma characteristics (i.e., signatures that may ultimately contribute to the design of patient-specific breast cancer management plans). The role of QIA/CAD has been expanding beyond screening programs towards applications in risk assessment, diagnosis, prognosis, and response to therapy as well as in data mining to discover relationships of image-based lesion characteristics with genomics and other phenotypes; thus, as they apply to disease states. These various computer-based applications are demonstrated through research examples from the Giger Lab.

Strategies for the Creation, Design and Implementation of Effective Interactive Computer-Aided Learning Software in Numerate Business Subjects--The Byzantium Experience.

ERIC Educational Resources Information Center

Wilkinson-Riddle, G. J.; Patel, Ashok

1998-01-01

Discusses courseware development, including intelligent tutoring systems, under the Teaching and Learning Technology Programme and the Byzantium project that was designed to define computer-aided learning performance standards suitable for numerate business subjects; examine reasons to use computer-aided learning; and improve access to educational…

Enhancing Engineering Computer-Aided Design Education Using Lectures Recorded on the PC

ERIC Educational Resources Information Center

McGrann, Roy T. R.

2006-01-01

Computer-Aided Engineering (CAE) is a course that is required during the third year in the mechanical engineering curriculum at Binghamton University. The primary objective of the course is to educate students in the procedures of computer-aided engineering design. The solid modeling and analysis program Pro/Engineer[TM] (PTC[R]) is used as the…

Key Issues in Instructional Computer Graphics.

ERIC Educational Resources Information Center

Wozny, Michael J.

1981-01-01

Addresses key issues facing universities which plan to establish instructional computer graphics facilities, including computer-aided design/computer aided manufacturing systems, role in curriculum, hardware, software, writing instructional software, faculty involvement, operations, and research. Thirty-seven references and two appendices are…

Norms and practices within marriage which shape gender roles, HIV/AIDS risk and risk reduction strategies in Cabo Delgado, Mozambique.

PubMed

Bandali, S

2011-09-01

Despite increasing HIV/AIDS rates among married individuals, minimal research has been conducted on how men and women respond to risk in a marriage. This paper examines strategies used by married individuals to combat HIV/AIDS risk against prevailing gender norms. Qualitative data were gathered in four villages of Cabo Delgado province, Mozambique. Group discussions were held with 160 men and women to explore gender norms, HIV/AIDS knowledge and risk determinants. From the group discussions, 29 individuals were selected for further in-depth interviews to explore relationships between gender norms and risk reduction efforts within marriages. Findings illustrate how infidelity and social limitations placed on condom use not only increase HIV/AIDS risk but also entrench gender disparities. Although power differences between genders can make it difficult to negotiate safe sex, men and women are taking measures to reduce perceived HIV/AIDS risk in their marriage. Married men are reconstructing norms and taking responsibility to protect their family from HIV/AIDS by remaining faithful. For women, responses to HIV/AIDS risk in a marriage are more closely related to their ability to generate an income. Financially dependent women tend to leave a risky marriage altogether in contrast to financially autonomous women who will negotiate condom use with their husband. Factors such as experience with a risky partner, the desire to maintain a good social standing, fear of HIV/AIDS acquisition and parental guidance and support influence men and women to reduce perceived HIV/AIDS risk, despite constraining gender norms and power imbalances in a marriage. Nuanced understandings of the ways in which men and women are already taking measures to decrease noted HIV/AIDS risk, despite gender norms that make this a challenge, should be incorporated into localised responses.

Computer Programming Languages and Expertise Needed by Practicing Engineers.

ERIC Educational Resources Information Center

Doelling, Irvin

1980-01-01

Discussed is the present engineering computer environment of a large aerospace company recognized as a leader in the application and development of computer-aided design and computer-aided manufacturing techniques. A review is given of the exposure spectrum of engineers to the world of computing, the computer languages used, and the career impacts…

A web-based computer aided system for liver surgery planning: initial implementation on RayPlus

NASA Astrophysics Data System (ADS)

Luo, Ming; Yuan, Rong; Sun, Zhi; Li, Tianhong; Xie, Qingguo

2016-03-01

At present, computer aided systems for liver surgery design and risk evaluation are widely used in clinical all over the world. However, most systems are local applications that run on high-performance workstations, and the images have to processed offline. Compared with local applications, a web-based system is accessible anywhere and for a range of regardless of relative processing power or operating system. RayPlus (http://rayplus.life.hust.edu.cn), a B/S platform for medical image processing, was developed to give a jump start on web-based medical image processing. In this paper, we implement a computer aided system for liver surgery planning on the architecture of RayPlus. The system consists of a series of processing to CT images including filtering, segmentation, visualization and analyzing. Each processing is packaged into an executable program and runs on the server side. CT images in DICOM format are processed step by to interactive modeling on browser with zero-installation and server-side computing. The system supports users to semi-automatically segment the liver, intrahepatic vessel and tumor from the pre-processed images. Then, surface and volume models are built to analyze the vessel structure and the relative position between adjacent organs. The results show that the initial implementation meets satisfactorily its first-order objectives and provide an accurate 3D delineation of the liver anatomy. Vessel labeling and resection simulation are planned to add in the future. The system is available on Internet at the link mentioned above and an open username for testing is offered.

Software for Probabilistic Risk Reduction

NASA Technical Reports Server (NTRS)

Hensley, Scott; Michel, Thierry; Madsen, Soren; Chapin, Elaine; Rodriguez, Ernesto

2004-01-01

A computer program implements a methodology, denoted probabilistic risk reduction, that is intended to aid in planning the development of complex software and/or hardware systems. This methodology integrates two complementary prior methodologies: (1) that of probabilistic risk assessment and (2) a risk-based planning methodology, implemented in a prior computer program known as Defect Detection and Prevention (DDP), in which multiple requirements and the beneficial effects of risk-mitigation actions are taken into account. The present methodology and the software are able to accommodate both process knowledge (notably of the efficacy of development practices) and product knowledge (notably of the logical structure of a system, the development of which one seeks to plan). Estimates of the costs and benefits of a planned development can be derived. Functional and non-functional aspects of software can be taken into account, and trades made among them. It becomes possible to optimize the planning process in the sense that it becomes possible to select the best suite of process steps and design choices to maximize the expectation of success while remaining within budget.

Computer-aided detection systems to improve lung cancer early diagnosis: state-of-the-art and challenges

NASA Astrophysics Data System (ADS)

Traverso, A.; Lopez Torres, E.; Fantacci, M. E.; Cerello, P.

2017-05-01

Lung cancer is one of the most lethal types of cancer, because its early diagnosis is not good enough. In fact, the detection of pulmonary nodule, potential lung cancers, in Computed Tomography scans is a very challenging and time-consuming task for radiologists. To support radiologists, researchers have developed Computer-Aided Diagnosis (CAD) systems for the automated detection of pulmonary nodules in chest Computed Tomography scans. Despite the high level of technological developments and the proved benefits on the overall detection performance, the usage of Computer-Aided Diagnosis in clinical practice is far from being a common procedure. In this paper we investigate the causes underlying this discrepancy and present a solution to tackle it: the M5L WEB- and Cloud-based on-demand Computer-Aided Diagnosis. In addition, we prove how the combination of traditional imaging processing techniques with state-of-art advanced classification algorithms allows to build a system whose performance could be much larger than any Computer-Aided Diagnosis developed so far. This outcome opens the possibility to use the CAD as clinical decision support for radiologists.

Promoting independence, health and well-being for older people: a feasibility study of computer-aided health and social risk appraisal system in primary care.

PubMed

Walters, Kate; Kharicha, Kalpa; Goodman, Claire; Handley, Melanie; Manthorpe, Jill; Cattan, Mima; Morris, Steve; Clarke, Caroline S; Round, Jeff; Iliffe, Steve

2017-03-24

With population ageing, research is needed into new low-cost, scalable methods of effective promotion of health and wellbeing for older people. We aimed to assess feasibility, reach and costs of implementing a new tailored computer-aided health and social risk appraisal system in primary care. Design: Feasibility study. Five General Practices in London (Ealing) and Hertfordshire, United Kingdom (UK) Participants: Random sample of patients aged 65 + years. The Multi-dimensional Risk Appraisal for Older people (MRA-O) system includes: 1) Postal questionnaire including health, lifestyle, social and environmental domains; 2) Software system generating a personalised feedback report with advice on health and wellbeing; 3) Follow-up of people with new concerning or complex needs by GPs or practice nurses. Feasibility of implementation; participant wellbeing, functional ability and quality of life; social needs, health risks, potential lifestyle changes; and costs of implementation. Response rates to initial postal invitations were low (526/1550, 34%). Of these, 454/526 (86%) completed MRA-O assessments. Compared to local UK Census data on older people, participants were younger, more were owner-occupiers and fewer were from ethnic minority groups than expected. A range of problems was identified by participants, including pain in last week (269/438, 61.4%), low physical activity (173/453, 38.2%), sedentary lifestyle (174/447, 38.3%), falls (117/439, 26.7%), incontinence (111/441 25.2%), impaired vision 116/451 (25.7%), impaired hearing (145/431, 33.6%), depressed mood (71/451, 15.7%), impaired memory (44/444 9.9%), social isolation (46/449, 10.2%) and loneliness (31/442, 7.0%). Self-rated health was good/excellent in 312/437 (71.4%), and quality of life and well-being were slightly above age-specific population norms. Implementation costs were low. Practices reviewed medical records of 143/454 (31.5%) of participants as a consequence of their responses, and actively followed up 110/454 (24.2%) of their patients. A computer-aided risk appraisal system was feasible for General Practices to implement, yields useful information about health and social problems, and identifies individual needs. Participation rates were however low, particularly for the oldest old, the poorest, and ethnic minority groups, and this type of intervention may increase inequalities in access. Widespread implementation of this approach would require work to address potential inequalities.

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

ERIC Educational Resources Information Center

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

Software For Computer-Aided Design Of Control Systems

NASA Technical Reports Server (NTRS)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

NREL Kicks Off Next Phase of Advanced Computer-Aided Battery Engineering |

Science.gov Websites

lithium-ion (Li-ion) batteries, known as a multi-scale multi-domain (GH-MSMD) model framework, was News | NREL Kicks Off Next Phase of Advanced Computer-Aided Battery Engineering NREL Kicks Off Next Phase of Advanced Computer-Aided Battery Engineering March 16, 2016 NREL researcher looks across

Defense Acquisitions Acronyms and Terms

DTIC Science & Technology

2012-12-01

Computer-Aided Design CADD Computer-Aided Design and Drafting CAE Component Acquisition Executive; Computer-Aided Engineering CAIV Cost As an...Radiation to Ordnance HFE Human Factors Engineering HHA Health Hazard Assessment HNA Host-Nation Approval HNS Host-Nation Support HOL High -Order...Engineering Change Proposal VHSIC Very High Speed Integrated Circuit VLSI Very Large Scale Integration VOC Volatile Organic Compound W WAN Wide

[The automatic iris map overlap technology in computer-aided iridiagnosis].

PubMed

He, Jia-feng; Ye, Hu-nian; Ye, Miao-yuan

2002-11-01

In the paper, iridology and computer-aided iridiagnosis technologies are briefly introduced and the extraction method of the collarette contour is then investigated. The iris map can be overlapped on the original iris image based on collarette contour extraction. The research on collarette contour extraction and iris map overlap is of great importance to computer-aided iridiagnosis technologies.

New Paradigms for Computer Aids to Invention.

ERIC Educational Resources Information Center

Langston, M. Diane

Many people are interested in computer aids to rhetorical invention and want to know how to evaluate an invention aid, what the criteria are for a good one, and how to assess the trade-offs involved in buying one product or another. The frame of reference for this evaluation is an "old paradigm," which treats the computer as if it were…

Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

NASA Astrophysics Data System (ADS)

Nan, Song

2018-03-01

Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

Assessing the inter-observer variability of Computer-Aided Nodule Assessment and Risk Yield (CANARY) to characterize lung adenocarcinomas.

PubMed

Nakajima, Erica C; Frankland, Michael P; Johnson, Tucker F; Antic, Sanja L; Chen, Heidi; Chen, Sheau-Chiann; Karwoski, Ronald A; Walker, Ronald; Landman, Bennett A; Clay, Ryan D; Bartholmai, Brian J; Rajagopalan, Srinivasan; Peikert, Tobias; Massion, Pierre P; Maldonado, Fabien

2018-01-01

Lung adenocarcinoma (ADC), the most common lung cancer type, is recognized increasingly as a disease spectrum. To guide individualized patient care, a non-invasive means of distinguishing indolent from aggressive ADC subtypes is needed urgently. Computer-Aided Nodule Assessment and Risk Yield (CANARY) is a novel computed tomography (CT) tool that characterizes early ADCs by detecting nine distinct CT voxel classes, representing a spectrum of lepidic to invasive growth, within an ADC. CANARY characterization has been shown to correlate with ADC histology and patient outcomes. This study evaluated the inter-observer variability of CANARY analysis. Three novice observers segmented and analyzed independently 95 biopsy-confirmed lung ADCs from Vanderbilt University Medical Center/Nashville Veterans Administration Tennessee Valley Healthcare system (VUMC/TVHS) and the Mayo Clinic (Mayo). Inter-observer variability was measured using intra-class correlation coefficient (ICC). The average ICC for all CANARY classes was 0.828 (95% CI 0.76, 0.895) for the VUMC/TVHS cohort, and 0.852 (95% CI 0.804, 0.901) for the Mayo cohort. The most invasive voxel classes had the highest ICC values. To determine whether nodule size influenced inter-observer variability, an additional cohort of 49 sub-centimeter nodules from Mayo were also segmented by three observers, with similar ICC results. Our study demonstrates that CANARY ADC classification between novice CANARY users has an acceptably low degree of variability, and supports the further development of CANARY for clinical application.

Three-Dimensional Computational Fluid Dynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haworth, D.C.; O'Rourke, P.J.; Ranganathan, R.

1998-09-01

Computational fluid dynamics (CFD) is one discipline falling under the broad heading of computer-aided engineering (CAE). CAE, together with computer-aided design (CAD) and computer-aided manufacturing (CAM), comprise a mathematical-based approach to engineering product and process design, analysis and fabrication. In this overview of CFD for the design engineer, our purposes are three-fold: (1) to define the scope of CFD and motivate its utility for engineering, (2) to provide a basic technical foundation for CFD, and (3) to convey how CFD is incorporated into engineering product and process design.

Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Insolia, Gerard

This document contains course outlines in computer-aided manufacturing developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The four units of the course cover the following: (1) introduction to computer-assisted design (CAD)/computer-assisted manufacturing (CAM); (2) CAM…

Buying CAM.

ERIC Educational Resources Information Center

Meloy, Jim; And Others

1990-01-01

The relationship between computer-aided design (CAD), computer-aided manufacturing (CAM), and computer numerical control (CNC) computer applications is described. Tips for helping educate the CAM buyer on what to look for and what to avoid when searching for the most appropriate instructional CAM package are provided. (KR)

Computer-Aided Design and Computer-Aided Manufacturing Hydroxyapatite/Epoxide Acrylate Maleic Compound Construction for Craniomaxillofacial Bone Defects.

PubMed

Zhang, Lei; Shen, Shunyao; Yu, Hongbo; Shen, Steve Guofang; Wang, Xudong

2015-07-01

The aim of this study was to investigate the use of computer-aided design and computer-aided manufacturing hydroxyapatite (HA)/epoxide acrylate maleic (EAM) compound construction artificial implants for craniomaxillofacial bone defects. Computed tomography, computer-aided design/computer-aided manufacturing and three-dimensional reconstruction, as well as rapid prototyping were performed in 12 patients between 2008 and 2013. The customized HA/EAM compound artificial implants were manufactured through selective laser sintering using a rapid prototyping machine into the exact geometric shapes of the defect. The HA/EAM compound artificial implants were then implanted during surgical reconstruction. Color-coded superimpositions demonstrated the discrepancy between the virtual plan and achieved results using Geomagic Studio. As a result, the HA/EAM compound artificial bone implants were perfectly matched with the facial areas that needed reconstruction. The postoperative aesthetic and functional results were satisfactory. The color-coded superimpositions demonstrated good consistency between the virtual plan and achieved results. The three-dimensional maximum deviation is 2.12 ± 0.65  mm and the three-dimensional mean deviation is 0.27 ± 0.07  mm. No facial nerve weakness or pain was observed at the follow-up examinations. Only 1 implant had to be removed 2 months after the surgery owing to severe local infection. No other complication was noted during the follow-up period. In conclusion, computer-aided, individually fabricated HA/EAM compound construction artificial implant was a good craniomaxillofacial surgical technique that yielded improved aesthetic results and functional recovery after reconstruction.

Differences in gay men's AIDS risk knowledge and behavior patterns in high and low AIDS prevalence cities.

PubMed Central

St Lawrence, J S; Hood, H V; Brasfield, T; Kelly, J A

1989-01-01

Several studies have found reductions in acquired immunodeficiency syndrome (AIDS) risk practices among gay men in high AIDS-prevalence cities since the start of the AIDS crisis. Much less is known about risk behavior patterns among gay men in smaller cities, where AIDS cases are less common and the prevalence of human immunodeficiency virus infection is relatively lower. In the study, men entering gay bars in three cities, one large and two small, completed anonymous surveys of sexual practices and AIDS risk knowledge. Men in high AIDS-prevalence areas were found to have had a greater number of sexual partners, were more knowledgeable about AIDS, were much more likely to engage in low-risk practices (such as mutual masturbation or body rubbing), and had unprotected anal intercourse less frequently than gay men in smaller cities. The most common sexual activity among gay men in the larger city was mutual masturbation, a low-risk practice. The most common sexual activity among gay men in the smaller cities was unprotected anal intercourse. Increased efforts are needed to educate gay men and to promote risk behavior changes among those living in smaller cities and in communities outside the prominent AIDS epicenters. PMID:2502813

Accuracy evaluation of metal copings fabricated by computer-aided milling and direct metal laser sintering systems

PubMed Central

Lee, Wan-Sun; Kim, Woong-Chul

2015-01-01

PURPOSE To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (α=.05), respectively. RESULTS The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (<120 µm). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced. PMID:25932310

Accuracy evaluation of metal copings fabricated by computer-aided milling and direct metal laser sintering systems.

PubMed

Park, Jong-Kyoung; Lee, Wan-Sun; Kim, Hae-Young; Kim, Woong-Chul; Kim, Ji-Hwan

2015-04-01

To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (α=.05), respectively. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (<120 µm). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

Effects of Response to 2014-2015 Ebola Outbreak on Deaths from Malaria, HIV/AIDS, and Tuberculosis, West Africa.

PubMed

Parpia, Alyssa S; Ndeffo-Mbah, Martial L; Wenzel, Natasha S; Galvani, Alison P

2016-03-01

Response to the 2014-2015 Ebola outbreak in West Africa overwhelmed the healthcare systems of Guinea, Liberia, and Sierra Leone, reducing access to health services for diagnosis and treatment for the major diseases that are endemic to the region: malaria, HIV/AIDS, and tuberculosis. To estimate the repercussions of the Ebola outbreak on the populations at risk for these diseases, we developed computational models for disease transmission and infection progression. We estimated that a 50% reduction in access to healthcare services during the Ebola outbreak exacerbated malaria, HIV/AIDS, and tuberculosis mortality rates by additional death counts of 6,269 (2,564-12,407) in Guinea; 1,535 (522-2,8780) in Liberia; and 2,819 (844-4,844) in Sierra Leone. The 2014-2015 Ebola outbreak was catastrophic in these countries, and its indirect impact of increasing the mortality rates of other diseases was also substantial.

[Medico-prophylactic foundations of the safety of information and communication technologies used in educational institutions].

PubMed

Baranov, A A; Kuchma, V R; Sukhareva, L M; Stepanova, M I; Teksheva, L M

2011-01-01

The problems pertaining to the safety of information and communication technologies used in the spheres of education and leisure activities of children and adolescents are discussed. The relevant risk factors are identified. Results of physiological and hygienic studies for substantiating regulations of continuous work with a personal computer are presented taking into account the children's age and hygienic requirements to electronic teaching aids.

Use of Automated Testing to Facilitate Affordable Design of Military Systems

DTIC Science & Technology

2015-04-30

momentum across the Navy and DoD. This initiative is no new big bang /silver bullet; it simply focuses on lowering the cost and risk of government...University of Minnesota. He has developed several specification languages, software tools for computer-aided software design, and fundamental theory ...review of lessons learned and recommendations for further enhancements are discussed. Overview: The Testing Challenge Infinity Is a Big Place The

A Review of Developments in Computer-Based Systems to Image Teeth and Produce Dental Restorations

PubMed Central

Rekow, E. Dianne; Erdman, Arthur G.; Speidel, T. Michael

1987-01-01

Computer-aided design and manufacturing (CAD/CAM) make it possible to automate the creation of dental restorations. Currently practiced techniques are described. Three automated systems currently under development are described and compared. Advances in computer-aided design and computer-aided manufacturing (CAD/CAM) provide a new option for dentistry, creating an alternative technique for producing dental restorations. It is possible to create dental restorations that are automatically produced and meet or exceed current requirements for fit and occlusion.

Photogrammetry and computer-aided piping design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keneflick, J.F.; Chirillo, R.D.

1985-02-18

Three-dimensional measurements taken from photographs of a plant model can be digitized and linked with computer-aided piping design. This can short-cut the design and construction of new plants and expedite repair and retrofitting projects. Some designers bridge the gap between model and computer by digitizing from orthographic prints obtained via orthography or the laser scanning of model sections. Such valve or fitting then processed is described in this paper. The marriage of photogrammetry and computer-aided piping design can economically produce such numerical drawings.

Integration of the Execution Support System for the Computer-Aided Prototyping System (CAPS)

DTIC Science & Technology

1990-09-01

SUPPORT SYSTEM FOR THE COMPUTER -AIDED PROTOTYPING SYSTEM (CAPS) by Frank V. Palazzo September 1990 Thesis Advisor: Luq± Approved for public release...ZATON REPOR ,,.VBE (, 6a NAME OF PERPORMING ORGAN ZAT7ON 6b OFF:CE SYVBOL 7a NAME OF MONITORINC O0-CA’Za- ON Computer Science Department (if applicable...Include Security Classification) Integration of the Execution Support System for the Computer -Aided Prototyping System (C S) 12 PERSONAL AUTHOR(S) Frank V

Influence of Computer-Aided Detection on Performance of Screening Mammography

PubMed Central

Fenton, Joshua J.; Taplin, Stephen H.; Carney, Patricia A.; Abraham, Linn; Sickles, Edward A.; D'Orsi, Carl; Berns, Eric A.; Cutter, Gary; Hendrick, R. Edward; Barlow, William E.; Elmore, Joann G.

2011-01-01

Background Computer-aided detection identifies suspicious findings on mammograms to assist radiologists. Since the Food and Drug Administration approved the technology in 1998, it has been disseminated into practice, but its effect on the accuracy of interpretation is unclear. Methods We determined the association between the use of computer-aided detection at mammography facilities and the performance of screening mammography from 1998 through 2002 at 43 facilities in three states. We had complete data for 222,135 women (a total of 429,345 mammograms), including 2351 women who received a diagnosis of breast cancer within 1 year after screening. We calculated the specificity, sensitivity, and positive predictive value of screening mammography with and without computer-aided detection, as well as the rates of biopsy and breast-cancer detection and the overall accuracy, measured as the area under the receiver-operating-characteristic (ROC) curve. Results Seven facilities (16%) implemented computer-aided detection during the study period. Diagnostic specificity decreased from 90.2% before implementation to 87.2% after implementation (P<0.001), the positive predictive value decreased from 4.1% to 3.2% (P = 0.01), and the rate of biopsy increased by 19.7% (P<0.001). The increase in sensitivity from 80.4% before implementation of computer-aided detection to 84.0% after implementation was not significant (P = 0.32). The change in the cancer-detection rate (including invasive breast cancers and ductal carcinomas in situ) was not significant (4.15 cases per 1000 screening mammograms before implementation and 4.20 cases after implementation, P = 0.90). Analyses of data from all 43 facilities showed that the use of computer-aided detection was associated with significantly lower overall accuracy than was nonuse (area under the ROC curve, 0.871 vs. 0.919; P = 0.005). Conclusions The use of computer-aided detection is associated with reduced accuracy of interpretation of screening mammograms. The increased rate of biopsy with the use of computer-aided detection is not clearly associated with improved detection of invasive breast cancer. PMID:17409321

Computer-aided system for diagnosing thyroid nodules on ultrasound: A comparison with radiologist-based clinical assessments.

PubMed

Gao, Luying; Liu, Ruyu; Jiang, Yuxin; Song, Wenfeng; Wang, Ying; Liu, Jia; Wang, Juanjuan; Wu, Dongqian; Li, Shuai; Hao, Aimin; Zhang, Bo

2018-04-01

The purpose of this study was to compare the diagnostic efficiency of a thyroid ultrasound computer-aided diagnosis (CAD) system with that of 1 radiologist. This study retrospectively reviewed 342 surgically resected thyroid nodules from July 2013 to December 2013 at our center. The nodules were assessed on typical ultrasound images using the CAD system and reviewed by 1 experienced radiologist. The radiologist stratified the risk of malignancy using the Thyroid Imaging Reporting and Data Systems (TIRADS) and the American Thyroid Association (ATA) guidelines. The radiologist, using TI-RADS and ATA guidelines, performed better than the CAD system (P < .01). The sensitivity of the CAD system was similar to that of an experienced radiologist (P > .05; P < .01; and P > .05). However, we found that the CAD system had lower specificity (P < .01). The sensitivity of a thyroid ultrasound CAD system in differentiating nodules was similar to that of an experienced radiologist. However, the CAD system had lower specificity. © 2017 Wiley Periodicals, Inc.

Internet Use among Ugandan Adolescents: Implications for HIV Intervention

PubMed Central

Ybarra, Michele L; Kiwanuka, Julius; Emenyonu, Nneka; Bangsberg, David R

2006-01-01

Background The Internet is fast gaining recognition as a powerful, low-cost method to deliver health intervention and prevention programs to large numbers of young people across diverse geographic regions. The feasibility and accessibility of Internet-based health interventions in resource-limited settings, where cost-effective interventions are most needed, is unknown. To determine the utility of developing technology-based interventions in resource-limited settings, availability and patterns of usage of the Internet first need to be assessed. Methods and Findings The Uganda Media and You Survey was a cross-sectional survey of Internet use among adolescents (ages 12–18 years) in Mbarara, Uganda, a municipality mainly serving a rural population in sub-Saharan Africa. Participants were randomly selected among eligible students attending one of five participating secondary day and boarding schools in Mbarara, Uganda. Of a total of 538 students selected, 93% (500) participated. Of the total respondents, 45% (223) reported ever having used the Internet, 78% (175) of whom reported going online in the previous week. As maternal education increased, so too did the odds of adolescent Internet use. Almost two in five respondents (38% [189]) reported already having used a computer or the Internet to search for health information. Over one-third (35% [173]) had used the computer or Internet to find information about HIV/AIDS, and 20% (102) had looked for sexual health information. Among Internet users, searching for HIV/AIDS information on a computer or online was significantly related to using the Internet weekly, emailing, visiting chat rooms, and playing online games. In contrast, going online at school was inversely related to looking for HIV/AIDS information via technology. If Internet access were free, 66% (330) reported that they would search for information about HIV/AIDS prevention online. Conclusions Both the desire to use, and the actual use of, the Internet to seek sexual health and HIV/AIDS information is high among secondary school students in Mbarara. The Internet may be a promising strategy to deliver low-cost HIV/AIDS risk reduction interventions in resource-limited settings with expanding Internet access. PMID:17090211

Internet use among Ugandan adolescents: implications for HIV intervention.

PubMed

Ybarra, Michele L; Kiwanuka, Julius; Emenyonu, Nneka; Bangsberg, David R

2006-11-01

The Internet is fast gaining recognition as a powerful, low-cost method to deliver health intervention and prevention programs to large numbers of young people across diverse geographic regions. The feasibility and accessibility of Internet-based health interventions in resource-limited settings, where cost-effective interventions are most needed, is unknown. To determine the utility of developing technology-based interventions in resource-limited settings, availability and patterns of usage of the Internet first need to be assessed. The Uganda Media and You Survey was a cross-sectional survey of Internet use among adolescents (ages 12-18 years) in Mbarara, Uganda, a municipality mainly serving a rural population in sub-Saharan Africa. Participants were randomly selected among eligible students attending one of five participating secondary day and boarding schools in Mbarara, Uganda. Of a total of 538 students selected, 93% (500) participated. Of the total respondents, 45% (223) reported ever having used the Internet, 78% (175) of whom reported going online in the previous week. As maternal education increased, so too did the odds of adolescent Internet use. Almost two in five respondents (38% [189]) reported already having used a computer or the Internet to search for health information. Over one-third (35% [173]) had used the computer or Internet to find information about HIV/AIDS, and 20% (102) had looked for sexual health information. Among Internet users, searching for HIV/AIDS information on a computer or online was significantly related to using the Internet weekly, emailing, visiting chat rooms, and playing online games. In contrast, going online at school was inversely related to looking for HIV/AIDS information via technology. If Internet access were free, 66% (330) reported that they would search for information about HIV/AIDS prevention online. Both the desire to use, and the actual use of, the Internet to seek sexual health and HIV/AIDS information is high among secondary school students in Mbarara. The Internet may be a promising strategy to deliver low-cost HIV/AIDS risk reduction interventions in resource-limited settings with expanding Internet access.

Interpreting Space-Mission LET Requirements for SEGR in Power MOSFETs

NASA Technical Reports Server (NTRS)

Lauenstein, J. M.; Ladbury, R. L.; Batchelor, D. A.; Goldsman, N.; Kim, H. S.; Phan, A. M.

2010-01-01

A Technology Computer Aided Design (TCAD) simulation-based method is developed to evaluate whether derating of high-energy heavy-ion accelerator test data bounds the risk for single-event gate rupture (SEGR) from much higher energy on-orbit ions for a mission linear energy transfer (LET) requirement. It is shown that a typical derating factor of 0.75 applied to a single-event effect (SEE) response curve defined by high-energy accelerator SEGR test data provides reasonable on-orbit hardness assurance, although in a high-voltage power MOSFET, it did not bound the risk of failure.

Computer-aided Instructional System for Transmission Line Simulation.

ERIC Educational Resources Information Center

Reinhard, Erwin A.; Roth, Charles H., Jr.

A computer-aided instructional system has been developed which utilizes dynamic computer-controlled graphic displays and which requires student interaction with a computer simulation in an instructional mode. A numerical scheme has been developed for digital simulation of a uniform, distortionless transmission line with resistive terminations and…

Proceedings of the Workshop on Computational Aspects in the Control of Flexible Systems, part 1

NASA Technical Reports Server (NTRS)

Taylor, Lawrence W., Jr. (Compiler)

1989-01-01

Control/Structures Integration program software needs, computer aided control engineering for flexible spacecraft, computer aided design, computational efficiency and capability, modeling and parameter estimation, and control synthesis and optimization software for flexible structures and robots are among the topics discussed.

A new approach to develop computer-aided detection schemes of digital mammograms

NASA Astrophysics Data System (ADS)

Tan, Maxine; Qian, Wei; Pu, Jiantao; Liu, Hong; Zheng, Bin

2015-06-01

The purpose of this study is to develop a new global mammographic image feature analysis based computer-aided detection (CAD) scheme and evaluate its performance in detecting positive screening mammography examinations. A dataset that includes images acquired from 1896 full-field digital mammography (FFDM) screening examinations was used in this study. Among them, 812 cases were positive for cancer and 1084 were negative or benign. After segmenting the breast area, a computerized scheme was applied to compute 92 global mammographic tissue density based features on each of four mammograms of the craniocaudal (CC) and mediolateral oblique (MLO) views. After adding three existing popular risk factors (woman’s age, subjectively rated mammographic density, and family breast cancer history) into the initial feature pool, we applied a sequential forward floating selection feature selection algorithm to select relevant features from the bilateral CC and MLO view images separately. The selected CC and MLO view image features were used to train two artificial neural networks (ANNs). The results were then fused by a third ANN to build a two-stage classifier to predict the likelihood of the FFDM screening examination being positive. CAD performance was tested using a ten-fold cross-validation method. The computed area under the receiver operating characteristic curve was AUC = 0.779   ±   0.025 and the odds ratio monotonically increased from 1 to 31.55 as CAD-generated detection scores increased. The study demonstrated that this new global image feature based CAD scheme had a relatively higher discriminatory power to cue the FFDM examinations with high risk of being positive, which may provide a new CAD-cueing method to assist radiologists in reading and interpreting screening mammograms.

Computer aided field editing in the DHS context: the Turkey experiment.

PubMed

Cushing, J; Loaiza, E

1994-01-01

"In this study two types of field editing used during the Turkey Demographic and Health Survey are compared. These two types of editing are computer aided field editing and manual editing. It is known that manual editing by field editors is a tedious job in which errors especially on skip questions can be missed; however, with the aid of computers field editors could quickly find all occasions on which an interviewer incorrectly followed a skip instruction. At the end of the experiment it has been found...that the field editing done with the aid of a notebook computer was consistently better than that done in the standard manual manner." (SUMMARY IN TUR) excerpt

A job safety program for construction workers designed to reduce the potential for occupational injury using tool box training sessions and computer-assisted biofeedback stress management techniques.

PubMed

Johnson, Kenneth A; Ruppe, Joan

2002-01-01

This project was conducted with a multicultural construction company in Hawaii, USA. The job duties performed included drywall and carpentry work. The following objectives were selected for this project: (a) fire prevention training and inspection of first aid equipment; (b) blood-borne pathogen training and risk evaluation; (c) ergonomic and risk evaluation intervention program; (d) electrical safety training and inspection program; (e) slips, trips, and falls safety training; (f) stress assessment and Personal Profile System; (g) safety and health program survey; (h) improving employee relations and morale by emphasizing spirituality; and (i) computer-assisted biofeedback stress management training. Results of the project indicated that observed safety hazards, reported injuries, and levels of perceived stress. were reduced for the majority of the population.

Quality indexing with computer-aided lexicography

NASA Technical Reports Server (NTRS)

Buchan, Ronald L.

1992-01-01

Indexing with computers is a far cry from indexing with the first indexing tool, the manual card sorter. With the aid of computer-aided lexicography, both indexing and indexing tools can provide standardization, consistency, and accuracy, resulting in greater quality control than ever before. A brief survey of computer activity in indexing is presented with detailed illustrations from NASA activity. Applications from techniques mentioned, such as Retrospective Indexing (RI), can be made to many indexing systems. In addition to improving the quality of indexing with computers, the improved efficiency with which certain tasks can be done is demonstrated.

COMPUTER-AIDED DATA ACQUISITION FOR COMBUSTION EXPERIMENTS

EPA Science Inventory

The article describes the use of computer-aided data acquisition techniques to aid the research program of the Combustion Research Branch (CRB) of the U.S. EPA's Air and Energy Engineering Research Laboratory (AEERL) in Research Triangle Park, NC, in particular on CRB's bench-sca...

Measurement of Satellite Impact Test Fragments for Modeling Orbital Debris

NASA Technical Reports Server (NTRS)

Hill, Nicole M.

2009-01-01

There are over 13,000 pieces of catalogued objects 10cm and larger in orbit around Earth [ODQN, January 2009, p12]. More than 6000 of these objects are fragments from explosions and collisions. As the earth-orbiting object count increases, debris-generating collisions in the future become a statistical inevitability. To aid in understanding this collision risk, the NASA Orbital Debris Program Office has developed computer models that calculate quantity and orbits of debris both currently in orbit and in future epochs. In order to create a reasonable computer model of the orbital debris environment, it is important to understand the mechanics of creation of debris as a result of a collision. The measurement of the physical characteristics of debris resulting from ground-based, hypervelocity impact testing aids in understanding the sizes and shapes of debris produced from potential impacts in orbit. To advance the accuracy of fragment shape/size determination, the NASA Orbital Debris Program Office recently implemented a computerized measurement system. The goal of this system is to improve knowledge and understanding of the relation between commonly used dimensions and overall shape. The technique developed involves scanning a single fragment with a hand-held laser device, measuring its size properties using a sophisticated software tool, and creating a three-dimensional computer model to demonstrate how the object might appear in orbit. This information is used to aid optical techniques in shape determination. This more automated and repeatable method provides higher accuracy in the size and shape determination of debris.

Computer-aided decision support systems for endoscopy in the gastrointestinal tract: a review.

PubMed

Liedlgruber, Michael; Uhl, Andreas

2011-01-01

Today, medical endoscopy is a widely used procedure to inspect the inner cavities of the human body. The advent of endoscopic imaging techniques-allowing the acquisition of images or videos-created the possibility for the development of the whole new branch of computer-aided decision support systems. Such systems aim at helping physicians to identify possibly malignant abnormalities more accurately. At the beginning of this paper, we give a brief introduction to the history of endoscopy, followed by introducing the main types of endoscopes which emerged so far (flexible endoscope, wireless capsule endoscope, and confocal laser endomicroscope). We then give a brief introduction to computer-aided decision support systems specifically targeted at endoscopy in the gastrointestinal tract. Then we present general facts and figures concerning computer-aided decision support systems and summarize work specifically targeted at computer-aided decision support in the gastrointestinal tract. This summary is followed by a discussion of some common issues concerning the approaches reviewed and suggestions of possible ways to resolve them.

Manipulating the Geometric Computer-aided Design of the Operational Requirements-based Casualty Assessment Model within BRL-CAD

DTIC Science & Technology

2018-03-30

ARL-TR-8336 ● MAR 2018 US Army Research Laboratory Manipulating the Geometric Computer-aided Design of the Operational...so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an official endorsement or approval of...Army Research Laboratory Manipulating the Geometric Computer-aided Design of the Operational Requirements-based Casualty Assessment Model within

Increasing productivity of the McAuto CAD/CAE system by user-specific applications programming

NASA Technical Reports Server (NTRS)

Plotrowski, S. M.; Vu, T. H.

1985-01-01

Significant improvements in the productivity of the McAuto Computer-Aided Design/Computer-Aided Engineering (CAD/CAE) system were achieved by applications programming using the system's own Graphics Interactive Programming language (GRIP) and the interface capabilities with the main computer on which the system resides. The GRIP programs for creating springs, bar charts, finite element model representations and aiding management planning are presented as examples.

Possible Computer Vision Systems and Automated or Computer-Aided Edging and Trimming

Treesearch

Philip A. Araman

1990-01-01

This paper discusses research which is underway to help our industry reduce costs, increase product volume and value recovery, and market more accurately graded and described products. The research is part of a team effort to help the hardwood sawmill industry automate with computer vision systems, and computer-aided or computer controlled processing. This paper...

Features of Computer-Based Decision Aids: Systematic Review, Thematic Synthesis, and Meta-Analyses.

PubMed

Syrowatka, Ania; Krömker, Dörthe; Meguerditchian, Ari N; Tamblyn, Robyn

2016-01-26

Patient information and education, such as decision aids, are gradually moving toward online, computer-based environments. Considerable research has been conducted to guide content and presentation of decision aids. However, given the relatively new shift to computer-based support, little attention has been given to how multimedia and interactivity can improve upon paper-based decision aids. The first objective of this review was to summarize published literature into a proposed classification of features that have been integrated into computer-based decision aids. Building on this classification, the second objective was to assess whether integration of specific features was associated with higher-quality decision making. Relevant studies were located by searching MEDLINE, Embase, CINAHL, and CENTRAL databases. The review identified studies that evaluated computer-based decision aids for adults faced with preference-sensitive medical decisions and reported quality of decision-making outcomes. A thematic synthesis was conducted to develop the classification of features. Subsequently, meta-analyses were conducted based on standardized mean differences (SMD) from randomized controlled trials (RCTs) that reported knowledge or decisional conflict. Further subgroup analyses compared pooled SMDs for decision aids that incorporated a specific feature to other computer-based decision aids that did not incorporate the feature, to assess whether specific features improved quality of decision making. Of 3541 unique publications, 58 studies met the target criteria and were included in the thematic synthesis. The synthesis identified six features: content control, tailoring, patient narratives, explicit values clarification, feedback, and social support. A subset of 26 RCTs from the thematic synthesis was used to conduct the meta-analyses. As expected, computer-based decision aids performed better than usual care or alternative aids; however, some features performed better than others. Integration of content control improved quality of decision making (SMD 0.59 vs 0.23 for knowledge; SMD 0.39 vs 0.29 for decisional conflict). In contrast, tailoring reduced quality of decision making (SMD 0.40 vs 0.71 for knowledge; SMD 0.25 vs 0.52 for decisional conflict). Similarly, patient narratives also reduced quality of decision making (SMD 0.43 vs 0.65 for knowledge; SMD 0.17 vs 0.46 for decisional conflict). Results were varied for different types of explicit values clarification, feedback, and social support. Integration of media rich or interactive features into computer-based decision aids can improve quality of preference-sensitive decision making. However, this is an emerging field with limited evidence to guide use. The systematic review and thematic synthesis identified features that have been integrated into available computer-based decision aids, in an effort to facilitate reporting of these features and to promote integration of such features into decision aids. The meta-analyses and associated subgroup analyses provide preliminary evidence to support integration of specific features into future decision aids. Further research can focus on clarifying independent contributions of specific features through experimental designs and refining the designs of features to improve effectiveness.

Computer Skill Acquisition and Retention: The Effects of Computer-Aided Self-Explanation

ERIC Educational Resources Information Center

Chi, Tai-Yin

2016-01-01

This research presents an experimental study to determine to what extent computer skill learners can benefit from generating self-explanation with the aid of different computer-based visualization technologies. Self-explanation was stimulated with dynamic visualization (Screencast), static visualization (Screenshot), or verbal instructions only,…

What's your relationship with computerized manufacturing technologies -- functional, dysfunctional or non-existent?

Treesearch

Jan Wiedenbeck; Jeff Parsons; Bruce Beeken

2009-01-01

Computer-aided manufacturing (CAM), in which computer-aided design (CAD) and computer numerically controlled (CNC) machining are integrated for the production of parts, became a viable option for the woodworking industry in the 1980s.

WINCADRE (COMPUTER-AIDED DATA REVIEW AND EVALUATION)

EPA Science Inventory

WinCADRE (Computer-Aided Data Review and Evaluation) is a Windows -based program designed for computer-assisted data validation. WinCADRE is a powerful tool which significantly decreases data validation turnaround time. The electronic-data-deliverable format has been designed ...

An automated tuberculosis screening strategy combining X-ray-based computer-aided detection and clinical information

NASA Astrophysics Data System (ADS)

Melendez, Jaime; Sánchez, Clara I.; Philipsen, Rick H. H. M.; Maduskar, Pragnya; Dawson, Rodney; Theron, Grant; Dheda, Keertan; van Ginneken, Bram

2016-04-01

Lack of human resources and radiological interpretation expertise impair tuberculosis (TB) screening programmes in TB-endemic countries. Computer-aided detection (CAD) constitutes a viable alternative for chest radiograph (CXR) reading. However, no automated techniques that exploit the additional clinical information typically available during screening exist. To address this issue and optimally exploit this information, a machine learning-based combination framework is introduced. We have evaluated this framework on a database containing 392 patient records from suspected TB subjects prospectively recruited in Cape Town, South Africa. Each record comprised a CAD score, automatically computed from a CXR, and 12 clinical features. Comparisons with strategies relying on either CAD scores or clinical information alone were performed. Our results indicate that the combination framework outperforms the individual strategies in terms of the area under the receiving operating characteristic curve (0.84 versus 0.78 and 0.72), specificity at 95% sensitivity (49% versus 24% and 31%) and negative predictive value (98% versus 95% and 96%). Thus, it is believed that combining CAD and clinical information to estimate the risk of active disease is a promising tool for TB screening.

Shuttle user analysis (study 2.2): Volume 3. Business Risk And Value of Operations in space (BRAVO). Part 4: Computer programs and data look-up

NASA Technical Reports Server (NTRS)

1974-01-01

Computer program listings as well as graphical and tabulated data needed by the analyst to perform a BRAVO analysis were examined. Graphical aid which can be used to determine the earth coverage of satellites in synchronous equatorial orbits was described. A listing for satellite synthesis computer program as well as a sample printout for the DSCS-11 satellite program and a listing of the symbols used in the program were included. The APL language listing for the payload program cost estimating computer program was given. This language is compatible with many of the time sharing remote terminals computers used in the United States. Data on the intelsat communications network was studied. Costs for telecommunications systems leasing, line of sight microwave relay communications systems, submarine telephone cables, and terrestrial power generation systems were also described.

A new prognostic score for AIDS-related lymphomas in the rituximab-era

PubMed Central

Barta, Stefan K.; Xue, Xiaonan; Wang, Dan; Lee, Jeannette Y.; Kaplan, Lawrence D.; Ribera, Josep-Maria; Oriol, Albert; Spina, Michele; Tirelli, Umberto; Boue, Francois; Wilson, Wyndham H.; Wyen, Christoph; Dunleavy, Kieron; Noy, Ariela; Sparano, Joseph A.

2014-01-01

While the International Prognostic Index is commonly used to predict outcomes in immunocompetent patients with aggressive B-cell non-Hodgkin lymphomas, HIV-infection is an important competing risk for death in patients with AIDS-related lymphomas. We investigated whether a newly created prognostic score (AIDS-related lymphoma International Prognostic Index) could better assess risk of death in patients with AIDS-related lymphomas. We randomly divided a dataset of 487 patients newly diagnosed with AIDS-related lymphomas and treated with rituximab-containing chemoimmunotherapy into a training (n=244) and validation (n=243) set. We examined the association of HIV-related and other known risk factors with overall survival in both sets independently. We defined a new score (AIDS-related lymphoma International Prognostic Index) by assigning weights to each significant predictor [age-adjusted International Prognostic Index, extranodal sites, HIV-score (composed of CD4 count, viral load, and prior history of AIDS)] with three risk categories similar to the age-adjusted International Prognostic Index (low, intermediate and high risk). We compared the prognostic value for overall survival between AIDS-related lymphoma International Prognostic Index and age-adjusted International Prognostic Index in the validation set and found that the AIDS-related lymphoma International Prognostic Index performed significantly better in predicting risk of death than the age-adjusted International Prognostic Index (P=0.004) and better discriminated risk of death between each risk category (P=0.015 vs. P=0.13). Twenty-eight percent of patients were defined as low risk by the ARL-IPI and had an estimated 5-year overall survival (OS) of 78% (52% intermediate risk, 5-year OS 60%; 20% high risk, 5-year OS 50%). PMID:25150257

Helical gears with circular arc teeth: Generation, geometry, precision and adjustment to errors, computer aided simulation of conditions of meshing and bearing contact

NASA Technical Reports Server (NTRS)

Litvin, Faydor L.; Tsay, Chung-Biau

1987-01-01

The authors have proposed a method for the generation of circular arc helical gears which is based on the application of standard equipment, worked out all aspects of the geometry of the gears, proposed methods for the computer aided simulation of conditions of meshing and bearing contact, investigated the influence of manufacturing and assembly errors, and proposed methods for the adjustment of gears to these errors. The results of computer aided solutions are illustrated with computer graphics.

Computer-aided drug discovery.

PubMed

Bajorath, Jürgen

2015-01-01

Computational approaches are an integral part of interdisciplinary drug discovery research. Understanding the science behind computational tools, their opportunities, and limitations is essential to make a true impact on drug discovery at different levels. If applied in a scientifically meaningful way, computational methods improve the ability to identify and evaluate potential drug molecules, but there remain weaknesses in the methods that preclude naïve applications. Herein, current trends in computer-aided drug discovery are reviewed, and selected computational areas are discussed. Approaches are highlighted that aid in the identification and optimization of new drug candidates. Emphasis is put on the presentation and discussion of computational concepts and methods, rather than case studies or application examples. As such, this contribution aims to provide an overview of the current methodological spectrum of computational drug discovery for a broad audience.

Computer-Aided Engineering Education at the K.U. Leuven.

ERIC Educational Resources Information Center

Snoeys, R.; Gobin, R.

1987-01-01

Describes some recent initiatives and developments in the computer-aided design program in the engineering faculty of the Katholieke Universiteit Leuven (Belgium). Provides a survey of the engineering curriculum, the computer facilities, and the main software packages available. (TW)

Progress on Intelligent Guidance and Control for Wind Shear Encounter

NASA Technical Reports Server (NTRS)

Stratton, D. Alexander

1990-01-01

Low altitude wind shear poses a serious threat to air safety. Avoiding severe wind shear challenges the ability of flight crews, as it involves assessing risk from uncertain evidence. A computerized intelligent cockpit aid can increase flight crew awareness of wind shear, improving avoidance decisions. The primary functions of a cockpit advisory expert system for wind shear avoidance are discussed. Also introduced are computational techniques being implemented to enable these primary functions.

Prosthetics & Orthotics Manufacturing Initiative (POMI)

DTIC Science & Technology

2012-12-21

could also allow for ‘virtual innovation,’ the testing of very novel socket designs without ever risking a patient’s well-being. In order to inform...that RL so that a computer aided design (CAD) socket can be fabricated for that individual. 3. Test the fit of the CAD socket through...developed a 4 layer braid laminate design that worked for manufacturing purposes but there was no testing of the laminate to determine if all strength

Software Tools for Shipbuilding Productivity

DTIC Science & Technology

1984-12-01

shipbuilding, is that design, manufacturing and robotic technology applications to shipbuilding have been proven. all aspects of shipbuilding is now a task...technical information about the process of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) effectively has been a problem of serious and...Design (CAD) 3.4.1 CAD System Components 3.4.2 CAD System Benefits 3.4.3 New and Future CAD Technologies Computer Aided Manufacturing (CAM) 3.5.1 CAM

Digital data acquisition for a CAD/CAM-fabricated titanium framework and zirconium oxide restorations for an implant-supported fixed complete dental prosthesis.

PubMed

Lin, Wei-Shao; Metz, Michael J; Pollini, Adrien; Ntounis, Athanasios; Morton, Dean

2014-12-01

This dental technique report describes a digital workflow with digital data acquisition at the implant level, computer-aided design and computer-aided manufacturing fabricated, tissue-colored, anodized titanium framework, individually luted zirconium oxide restorations, and autopolymerizing injection-molded acrylic resin to fabricate an implant-supported, metal-ceramic-resin fixed complete dental prosthesis in an edentulous mandible. The 1-step computer-aided design and computer-aided manufacturing fabrication of titanium framework and zirconium oxide restorations can provide a cost-effective alternative to the conventional metal-resin fixed complete dental prosthesis. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Correction of facial and mandibular asymmetry using a computer aided design/computer aided manufacturing prefabricated titanium implant.

PubMed

Watson, Jason; Hatamleh, Muhanad; Alwahadni, Ahed; Srinivasan, Dilip

2014-05-01

Patients with significant craniofacial asymmetry may have functional problems associated with their occlusion and aesthetic concerns related to the imbalance in soft and hard tissue profiles. This report details a case of facial asymmetry secondary to left mandible angle deficiency due to undergoing previous radiotherapy. We describe the correction of the bony deformity using computer aided design/computer aided manufacturing custom-made titanium onlay using novel direct metal laser sintering. The direct metal laser sintering onlay proved a very accurate operative fit and showed a good aesthetic correction of the bony defect with no reported complications postoperatively. It is a useful low-morbidity technique, and there is no resorption or associated donor-site complications.

Classification of Computer-Aided Design-Computer-Aided Manufacturing Applications for the Reconstruction of Cranio-Maxillo-Facial Defects.

PubMed

Wauters, Lauri D J; Miguel-Moragas, Joan San; Mommaerts, Maurice Y

2015-11-01

To gain insight into the methodology of different computer-aided design-computer-aided manufacturing (CAD-CAM) applications for the reconstruction of cranio-maxillo-facial (CMF) defects. We reviewed and analyzed the available literature pertaining to CAD-CAM for use in CMF reconstruction. We proposed a classification system of the techniques of implant and cutting, drilling, and/or guiding template design and manufacturing. The system consisted of 4 classes (I-IV). These classes combine techniques used for both the implant and template to most accurately describe the methodology used. Our classification system can be widely applied. It should facilitate communication and immediate understanding of the methodology of CAD-CAM applications for the reconstruction of CMF defects.

Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks.

PubMed

Andreiuolo, Rafael Ferrone; Sabrosa, Carlos Eduardo; Dias, Katia Regina H Cervantes

2013-09-01

The use of bi-layered all-ceramic crowns has continuously grown since the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia cores. Unfortunately, despite the outstanding mechanical properties of zirconia, problems related to porcelain cracking or chipping remain. One of the reasons for this is that ceramic copings are usually milled to uniform thicknesses of 0.3-0.6 mm around the whole tooth preparation. This may not provide uniform thickness or appropriate support for the veneering porcelain. To prevent these problems, the dual-scan technique demonstrates an alternative that allows the restorative team to customize zirconia CAD/CAM frameworks with adequate porcelain thickness and support in a simple manner.

Computer Simulated Visual and Tactile Feedback as an Aid to Manipulator and Vehicle Control,

DTIC Science & Technology

1981-05-08

STATEMENT ........................ 8 Artificial Intellegence Versus Supervisory Control ....... 8 Computer Generation of Operator Feedback...operator. Artificial Intelligence Versus Supervisory Control The use of computers to aid human operators can be divided into two catagories: artificial ...operator. Artificial intelligence ( A. I. ) attempts to give the computer maximum intelligence and to replace all operator functions by the computer

Virtual Reality versus Computer-Aided Exposure Treatments for Fear of Flying

ERIC Educational Resources Information Center

Tortella-Feliu, Miquel; Botella, Cristina; Llabres, Jordi; Breton-Lopez, Juana Maria; del Amo, Antonio Riera; Banos, Rosa M.; Gelabert, Joan M.

2011-01-01

Evidence is growing that two modalities of computer-based exposure therapies--virtual reality and computer-aided psychotherapy--are effective in treating anxiety disorders, including fear of flying. However, they have not yet been directly compared. The aim of this study was to analyze the efficacy of three computer-based exposure treatments for…

The Implications of Cognitive Psychology for Computer-Based Learning Tools.

ERIC Educational Resources Information Center

Kozma, Robert B.

1987-01-01

Defines cognitive computer tools as software programs that use the control capabilities of computers to amplify, extend, or enhance human cognition; suggests seven ways in which computers can aid learning; and describes the "Learning Tool," a software package for the Apple Macintosh microcomputer that is designed to aid learning of…

Artificial Intelligence and Computer Assisted Instruction. CITE Report No. 4.

ERIC Educational Resources Information Center

Elsom-Cook, Mark

The purpose of the paper is to outline some of the major ways in which artificial intelligence research and techniques can affect usage of computers in an educational environment. The role of artificial intelligence is defined, and the difference between Computer Aided Instruction (CAI) and Intelligent Computer Aided Instruction (ICAI) is…

Electronic Circuit Analysis Language (ECAL)

NASA Astrophysics Data System (ADS)

Chenghang, C.

1983-03-01

The computer aided design technique is an important development in computer applications and it is an important component of computer science. The special language for electronic circuit analysis is the foundation of computer aided design or computer aided circuit analysis (abbreviated as CACD and CACA) of simulated circuits. Electronic circuit analysis language (ECAL) is a comparatively simple and easy to use circuit analysis special language which uses the FORTRAN language to carry out the explanatory executions. It is capable of conducting dc analysis, ac analysis, and transient analysis of a circuit. Futhermore, the results of the dc analysis can be used directly as the initial conditions for the ac and transient analyses.

The effect of a decision aid intervention on decision making about coronary heart disease risk reduction: secondary analyses of a randomized trial

PubMed Central

2014-01-01

Background Decision aids offer promise as a practical solution to improve patient decision making about coronary heart disease (CHD) prevention medications and help patients choose medications to which they are likely to adhere. However, little data is available on decision aids designed to promote adherence. Methods In this paper, we report on secondary analyses of a randomized trial of a CHD adherence intervention (second generation decision aid plus tailored messages) versus usual care in an effort to understand how the decision aid facilitates adherence. We focus on data collected from the primary study visit, when intervention participants presented 45 minutes early to a previously scheduled provider visit; viewed the decision aid, indicating their intent for CHD risk reduction after each decision aid component (individualized risk assessment and education, values clarification, and coaching); and filled out a post-decision aid survey assessing their knowledge, perceived risk, decisional conflict, and intent for CHD risk reduction. Control participants did not present early and received usual care from their provider. Following the provider visit, participants in both groups completed post-visit surveys assessing the number and quality of CHD discussions with their provider, their intent for CHD risk reduction, and their feelings about the decision aid. Results We enrolled 160 patients into our study (81 intervention, 79 control). Within the decision aid group, the decision aid significantly increased knowledge of effective CHD prevention strategies (+21 percentage points; adjusted p<.0001) and the accuracy of perceived CHD risk (+33 percentage points; adjusted p<.0001), and significantly decreased decisional conflict (-0.63; adjusted p<.0001). Comparing between study groups, the decision aid also significantly increased CHD prevention discussions with providers (+31 percentage points; adjusted p<.0001) and improved perceptions of some features of patient-provider interactions. Further, it increased participants’ intentions for any effective CHD risk reducing strategies (+21 percentage points; 95% CI 5 to 37 percentage points), with a majority of the effect from the educational component of the decision aid. Ninety-nine percent of participants found the decision aid easy to understand and 93% felt it easy to use. Conclusions Decision aids can play an important role in improving decisions about CHD prevention and increasing patient-provider discussions and intent to reduce CHD risk. PMID:24575882

WINCADRE INORGANIC (WINDOWS COMPUTER-AIDED DATA REVIEW AND EVALUATION)

EPA Science Inventory

WinCADRE (Computer-Aided Data Review and Evaluation) is a Windows -based program designed for computer-assisted data validation. WinCADRE is a powerful tool which significantly decreases data validation turnaround time. The electronic-data-deliverable format has been designed in...

AIDS knowledge and high risk behaviors in the chronic mentally ill.

PubMed

Katz, R C; Watts, C; Santman, J

1994-08-01

Chronic mentally ill adults are a high risk group for AIDS. In the present study, we used a questionnaire to assess AIDS knowledge, attitudes, and risk behaviors in 54 men and women who were clients at a "drop in" center for mentally ill adults. Most of the subjects were suffering from schizophrenia and about one-third of them had co-existing drug problems. Results showed widespread misunderstandings about AIDS transmission, high risk groups, and practices. Many of the subjects had been treated for STDs such as syphilis and gonorrhea and were engaging in behaviors that increased their vulnerability to AIDS. These include casual sex, anal sex, sex with an IV drug user, or sex in exchange for money, drugs, or a place to sleep. Subjects expressed a moderately high level of concern about acquiring AIDS/HIV, and 15% of those tested (5/33) said they already had the illness. We observed a significant correlation between misinformation about AIDS and the frequency of high risk behaviors. We also detected ambivalence about using condoms and i.v. drugs. Although males and females did not differ in AIDS knowledge or risk behaviors, the AIDS knowledge of both groups was significantly lower than a comparison sample of public high school students. Taken together, the results underscore the immediate need for comprehensive AIDS assessment, education, and prevention in this segment of the population.

Noninvasive Computed Tomography–based Risk Stratification of Lung Adenocarcinomas in the National Lung Screening Trial

PubMed Central

Maldonado, Fabien; Duan, Fenghai; Raghunath, Sushravya M.; Rajagopalan, Srinivasan; Karwoski, Ronald A.; Garg, Kavita; Greco, Erin; Nath, Hrudaya; Robb, Richard A.; Bartholmai, Brian J.

2015-01-01

Rationale: Screening for lung cancer using low-dose computed tomography (CT) reduces lung cancer mortality. However, in addition to a high rate of benign nodules, lung cancer screening detects a large number of indolent cancers that generally belong to the adenocarcinoma spectrum. Individualized management of screen-detected adenocarcinomas would be facilitated by noninvasive risk stratification. Objectives: To validate that Computer-Aided Nodule Assessment and Risk Yield (CANARY), a novel image analysis software, successfully risk stratifies screen-detected lung adenocarcinomas based on clinical disease outcomes. Methods: We identified retrospective 294 eligible patients diagnosed with lung adenocarcinoma spectrum lesions in the low-dose CT arm of the National Lung Screening Trial. The last low-dose CT scan before the diagnosis of lung adenocarcinoma was analyzed using CANARY blinded to clinical data. Based on their parametric CANARY signatures, all the lung adenocarcinoma nodules were risk stratified into three groups. CANARY risk groups were compared using survival analysis for progression-free survival. Measurements and Main Results: A total of 294 patients were included in the analysis. Kaplan-Meier analysis of all the 294 adenocarcinoma nodules stratified into the Good, Intermediate, and Poor CANARY risk groups yielded distinct progression-free survival curves (P < 0.0001). This observation was confirmed in the unadjusted and adjusted (age, sex, race, and smoking status) progression-free survival analysis of all stage I cases. Conclusions: CANARY allows the noninvasive risk stratification of lung adenocarcinomas into three groups with distinct post-treatment progression-free survival. Our results suggest that CANARY could ultimately facilitate individualized management of incidentally or screen-detected lung adenocarcinomas. PMID:26052977

Noninvasive Computed Tomography-based Risk Stratification of Lung Adenocarcinomas in the National Lung Screening Trial.

PubMed

Maldonado, Fabien; Duan, Fenghai; Raghunath, Sushravya M; Rajagopalan, Srinivasan; Karwoski, Ronald A; Garg, Kavita; Greco, Erin; Nath, Hrudaya; Robb, Richard A; Bartholmai, Brian J; Peikert, Tobias

2015-09-15

Screening for lung cancer using low-dose computed tomography (CT) reduces lung cancer mortality. However, in addition to a high rate of benign nodules, lung cancer screening detects a large number of indolent cancers that generally belong to the adenocarcinoma spectrum. Individualized management of screen-detected adenocarcinomas would be facilitated by noninvasive risk stratification. To validate that Computer-Aided Nodule Assessment and Risk Yield (CANARY), a novel image analysis software, successfully risk stratifies screen-detected lung adenocarcinomas based on clinical disease outcomes. We identified retrospective 294 eligible patients diagnosed with lung adenocarcinoma spectrum lesions in the low-dose CT arm of the National Lung Screening Trial. The last low-dose CT scan before the diagnosis of lung adenocarcinoma was analyzed using CANARY blinded to clinical data. Based on their parametric CANARY signatures, all the lung adenocarcinoma nodules were risk stratified into three groups. CANARY risk groups were compared using survival analysis for progression-free survival. A total of 294 patients were included in the analysis. Kaplan-Meier analysis of all the 294 adenocarcinoma nodules stratified into the Good, Intermediate, and Poor CANARY risk groups yielded distinct progression-free survival curves (P < 0.0001). This observation was confirmed in the unadjusted and adjusted (age, sex, race, and smoking status) progression-free survival analysis of all stage I cases. CANARY allows the noninvasive risk stratification of lung adenocarcinomas into three groups with distinct post-treatment progression-free survival. Our results suggest that CANARY could ultimately facilitate individualized management of incidentally or screen-detected lung adenocarcinomas.

Computer-aided US diagnosis of breast lesions by using cell-based contour grouping.

PubMed

Cheng, Jie-Zhi; Chou, Yi-Hong; Huang, Chiun-Sheng; Chang, Yeun-Chung; Tiu, Chui-Mei; Chen, Kuei-Wu; Chen, Chung-Ming

2010-06-01

To develop a computer-aided diagnostic algorithm with automatic boundary delineation for differential diagnosis of benign and malignant breast lesions at ultrasonography (US) and investigate the effect of boundary quality on the performance of a computer-aided diagnostic algorithm. This was an institutional review board-approved retrospective study with waiver of informed consent. A cell-based contour grouping (CBCG) segmentation algorithm was used to delineate the lesion boundaries automatically. Seven morphologic features were extracted. The classifier was a logistic regression function. Five hundred twenty breast US scans were obtained from 520 subjects (age range, 15-89 years), including 275 benign (mean size, 15 mm; range, 5-35 mm) and 245 malignant (mean size, 18 mm; range, 8-29 mm) lesions. The newly developed computer-aided diagnostic algorithm was evaluated on the basis of boundary quality and differentiation performance. The segmentation algorithms and features in two conventional computer-aided diagnostic algorithms were used for comparative study. The CBCG-generated boundaries were shown to be comparable with the manually delineated boundaries. The area under the receiver operating characteristic curve (AUC) and differentiation accuracy were 0.968 +/- 0.010 and 93.1% +/- 0.7, respectively, for all 520 breast lesions. At the 5% significance level, the newly developed algorithm was shown to be superior to the use of the boundaries and features of the two conventional computer-aided diagnostic algorithms in terms of AUC (0.974 +/- 0.007 versus 0.890 +/- 0.008 and 0.788 +/- 0.024, respectively). The newly developed computer-aided diagnostic algorithm that used a CBCG segmentation method to measure boundaries achieved a high differentiation performance. Copyright RSNA, 2010

Home-Based Risk of Falling Assessment Test Using a Closed-Loop Balance Model.

PubMed

Ayena, Johannes C; Zaibi, Helmi; Otis, Martin J-D; Menelas, Bob-Antoine J

2016-12-01

The aim of this study is to improve and facilitate the methods used to assess risk of falling at home among older people through the computation of a risk of falling in real time in daily activities. In order to increase a real time computation of the risk of falling, a closed-loop balance model is proposed and compared with One-Leg Standing Test (OLST). This balance model allows studying the postural response of a person having an unpredictable perturbation. Twenty-nine volunteers participated in this study for evaluating the effectiveness of the proposed system which includes seventeen elder participants: ten healthy elderly ( 68.4 ±5.5 years), seven Parkinson's disease (PD) subjects ( 66.28 ±8.9 years), and twelve healthy young adults ( 28.27 ±3.74 years). Our work suggests that there is a relationship between OLST score and the risk of falling based on center of pressure measurement with four low cost force sensors located inside an instrumented insole, which could be predicted using our suggested closed-loop balance model. For long term monitoring at home, this system could be included in a medical electronic record and could be useful as a diagnostic aid tool.

Advances in computer-aided well-test interpretation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horne, R.N.

1994-07-01

Despite the feeling expressed several times over the past 40 years that well-test analysis had reached it peak development, an examination of recent advances shows continuous expansion in capability, with future improvement likely. The expansion in interpretation capability over the past decade arose mainly from the development of computer-aided techniques, which, although introduced 20 years ago, have come into use only recently. The broad application of computer-aided interpretation originated with the improvement of the methodologies and continued with the expansion in computer access and capability that accompanied the explosive development of the microcomputer industry. This paper focuses on the differentmore » pieces of the methodology that combine to constitute a computer-aided interpretation and attempts to compare some of the approaches currently used. Future directions of the approach are also discussed. The separate areas discussed are deconvolution, pressure derivatives, model recognition, nonlinear regression, and confidence intervals.« less

Features of Computer-Based Decision Aids: Systematic Review, Thematic Synthesis, and Meta-Analyses

PubMed Central

Krömker, Dörthe; Meguerditchian, Ari N; Tamblyn, Robyn

2016-01-01

Background Patient information and education, such as decision aids, are gradually moving toward online, computer-based environments. Considerable research has been conducted to guide content and presentation of decision aids. However, given the relatively new shift to computer-based support, little attention has been given to how multimedia and interactivity can improve upon paper-based decision aids. Objective The first objective of this review was to summarize published literature into a proposed classification of features that have been integrated into computer-based decision aids. Building on this classification, the second objective was to assess whether integration of specific features was associated with higher-quality decision making. Methods Relevant studies were located by searching MEDLINE, Embase, CINAHL, and CENTRAL databases. The review identified studies that evaluated computer-based decision aids for adults faced with preference-sensitive medical decisions and reported quality of decision-making outcomes. A thematic synthesis was conducted to develop the classification of features. Subsequently, meta-analyses were conducted based on standardized mean differences (SMD) from randomized controlled trials (RCTs) that reported knowledge or decisional conflict. Further subgroup analyses compared pooled SMDs for decision aids that incorporated a specific feature to other computer-based decision aids that did not incorporate the feature, to assess whether specific features improved quality of decision making. Results Of 3541 unique publications, 58 studies met the target criteria and were included in the thematic synthesis. The synthesis identified six features: content control, tailoring, patient narratives, explicit values clarification, feedback, and social support. A subset of 26 RCTs from the thematic synthesis was used to conduct the meta-analyses. As expected, computer-based decision aids performed better than usual care or alternative aids; however, some features performed better than others. Integration of content control improved quality of decision making (SMD 0.59 vs 0.23 for knowledge; SMD 0.39 vs 0.29 for decisional conflict). In contrast, tailoring reduced quality of decision making (SMD 0.40 vs 0.71 for knowledge; SMD 0.25 vs 0.52 for decisional conflict). Similarly, patient narratives also reduced quality of decision making (SMD 0.43 vs 0.65 for knowledge; SMD 0.17 vs 0.46 for decisional conflict). Results were varied for different types of explicit values clarification, feedback, and social support. Conclusions Integration of media rich or interactive features into computer-based decision aids can improve quality of preference-sensitive decision making. However, this is an emerging field with limited evidence to guide use. The systematic review and thematic synthesis identified features that have been integrated into available computer-based decision aids, in an effort to facilitate reporting of these features and to promote integration of such features into decision aids. The meta-analyses and associated subgroup analyses provide preliminary evidence to support integration of specific features into future decision aids. Further research can focus on clarifying independent contributions of specific features through experimental designs and refining the designs of features to improve effectiveness. PMID:26813512

Epidemiology of non-keratinocytic skin cancers among persons with acquired immunodeficiency syndrome in the U.S.

PubMed Central

Lanoy, Emilie; Dores, Graça M.; Madeleine, Margaret M.; Toro, Jorge R.; Fraumeni, Joseph F.; Engels, Eric A.

2009-01-01

Objective Immunosuppression may increase risk for some skin cancers. We evaluated skin cancer epidemiology among persons with acquired immunodeficiency syndrome (AIDS). Design We linked data from population-based U.S. AIDS and cancer registries to evaluate risk of non-keratinocytic skin cancers (melanoma, Merkel cell carcinoma, and appendageal carcinomas, including sebaceous carcinoma) in 497,142 persons with AIDS. Methods Standardized incidence ratios (SIRs) were calculated to relate skin cancer risk to that in the general population. We used logistic regression to compare risk according to demographic factors, CD4 count, and a geographic index of ultraviolet radiation exposure. Results From 60 months before to 60 months after AIDS onset, persons with AIDS had elevated risks of melanoma (SIR=1.3, 95%CI 1.1-1.4, n=292 cases) and, more strongly, of Merkel cell carcinoma (SIR=11, 95%CI 6.3-17, n=17) and sebaceous carcinoma (SIR=8.1, 95%CI 3.2-17, n=7). Risk for appendageal carcinomas increased with progressive time relative to AIDS onset (p-trend=0.03). Risk of these skin cancers was higher in non-Hispanic whites than other racial/ethnic groups, and melanoma risk was highest among men who have sex with men. Melanoma risk was unrelated to CD4 count at AIDS onset (p=0.32). Risks for melanoma and appendageal carcinomas rose with increasing ultraviolet radiation exposure (p-trend<10-4 and p-trend=10-3, respectively). Conclusions Among persons with AIDS, there is a modest excess risk of melanoma which is not strongly related to immunosuppression and may relate to ultraviolet radiation exposure. In contrast, the greatly increased risks for Merkel cell and sebaceous carcinoma suggest an etiologic role for immunosuppression. PMID:19114864

Low-Cost Computer-Aided Instruction/Computer-Managed Instruction (CAI/CMI) System: Feasibility Study. Final Report.

ERIC Educational Resources Information Center

Lintz, Larry M.; And Others

This study investigated the feasibility of a low cost computer-aided instruction/computer-managed instruction (CAI/CMI) system. Air Force instructors and training supervisors were surveyed to determine the potential payoffs of various CAI and CMI functions. Results indicated that a wide range of capabilities had potential for resident technical…

Computer Aided Drafting Packages for Secondary Education. Edition 1. Apple II and Macintosh. A MicroSIFT Quarterly Report.

ERIC Educational Resources Information Center

Pollard, Jim

This report reviews software packages for Apple Macintosh and Apple II computers available to secondary schools to teach computer-aided drafting (CAD). Products for the report were gathered through reviews of CAD periodicals, computers in education periodicals, advertisements, and teacher recommendations. The first section lists the primary…

Computer Aided Drug Design: Success and Limitations.

PubMed

Baig, Mohammad Hassan; Ahmad, Khurshid; Roy, Sudeep; Ashraf, Jalaluddin Mohammad; Adil, Mohd; Siddiqui, Mohammad Haris; Khan, Saif; Kamal, Mohammad Amjad; Provazník, Ivo; Choi, Inho

2016-01-01

Over the last few decades, computer-aided drug design has emerged as a powerful technique playing a crucial role in the development of new drug molecules. Structure-based drug design and ligand-based drug design are two methods commonly used in computer-aided drug design. In this article, we discuss the theory behind both methods, as well as their successful applications and limitations. To accomplish this, we reviewed structure based and ligand based virtual screening processes. Molecular dynamics simulation, which has become one of the most influential tool for prediction of the conformation of small molecules and changes in their conformation within the biological target, has also been taken into account. Finally, we discuss the principles and concepts of molecular docking, pharmacophores and other methods used in computer-aided drug design.

Removal of Supernumerary Teeth Utilizing a Computer-Aided Design/Computer-Aided Manufacturing Surgical Guide.

PubMed

Jo, Chanwoo; Bae, Doohwan; Choi, Byungho; Kim, Jihun

2017-05-01

Supernumerary teeth need to be removed because they can cause various complications. Caution is needed because their removal can cause damage to permanent teeth or tooth germs in the local vicinity. Surgical guides have recently been used in maxillofacial surgery. Because surgical guides are designed through preoperative analysis by computer-aided design software and fabricated using a 3-dimensional printer applying computer-aided manufacturing technology, they increase the accuracy and predictability of surgery. This report describes 2 cases of removal of a mesiodens-1 from a child and 1 from an adolescent-using a surgical guide; these would have been difficult to remove with conventional surgical methods. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

SCCT guidelines on radiation dose and dose-optimization strategies in cardiovascular CT

PubMed Central

Halliburton, Sandra S.; Abbara, Suhny; Chen, Marcus Y.; Gentry, Ralph; Mahesh, Mahadevappa; Raff, Gilbert L.; Shaw, Leslee J.; Hausleiter, Jörg

2012-01-01

Over the last few years, computed tomography (CT) has developed into a standard clinical test for a variety of cardiovascular conditions. The emergence of cardiovascular CT during a period of dramatic increase in radiation exposure to the population from medical procedures and heightened concern about the subsequent potential cancer risk has led to intense scrutiny of the radiation burden of this new technique. This has hastened the development and implementation of dose reduction tools and prompted closer monitoring of patient dose. In an effort to aid the cardiovascular CT community in incorporating patient-centered radiation dose optimization and monitoring strategies into standard practice, the Society of Cardiovascular Computed Tomography has produced a guideline document to review available data and provide recommendations regarding interpretation of radiation dose indices and predictors of risk, appropriate use of scanner acquisition modes and settings, development of algorithms for dose optimization, and establishment of procedures for dose monitoring. PMID:21723512

Audio computer-assisted self interview compared to traditional interview in an HIV-related behavioral survey in Vietnam.

PubMed

Le, Linh Cu; Vu, Lan T H

2012-10-01

Globally, population surveys on HIV/AIDS and other sensitive topics have been using audio computer-assisted self interview for many years. This interview technique, however, is still new to Vietnam and little is known about its application and impact in general population surveys. One plausible hypothesis is that residents of Vietnam interviewed using this technique may provide a higher response rate and be more willing to reveal their true behaviors than if interviewed with traditional methods. This study aims to compare audio computer-assisted self interview with traditional face-to-face personal interview and self-administered interview with regard to rates of refusal and affirmative responses to questions on sensitive topics related to HIV/AIDS. In June 2010, a randomized study was conducted in three cities (Ha Noi, Da Nan and Can Tho), using a sample of 4049 residents aged 15 to 49 years. Respondents were randomly assigned to one of three interviewing methods: audio computer-assisted self interview, personal face-to-face interview, and self-administered paper interview. Instead of providing answers directly to interviewer questions as with traditional methods, audio computer-assisted self-interview respondents read the questions displayed on a laptop screen, while listening to the questions through audio headphones, then entered responses using a laptop keyboard. A MySQL database was used for data management and SPSS statistical package version 18 used for data analysis with bivariate and multivariate statistical techniques. Rates of high risk behaviors and mean values of continuous variables were compared for the three data collection methods. Audio computer-assisted self interview showed advantages over comparison techniques, achieving lower refusal rates and reporting higher prevalence of some sensitive and risk behaviors (perhaps indication of more truthful answers). Premarital sex was reported by 20.4% in the audio computer-assisted self-interview survey group, versus 11.4% in the face-to-face group and 11.1% in the self-administered paper questionnaire group. The pattern was consistent for both male and female respondents and in both urban and rural settings. Men in the audio computer-assisted self-interview group also reported higher levels of high-risk sexual behavior--such as sex with sex workers and a higher average number of sexual partners--than did women in the same group. Importantly, item refusal rates on sensitive topics tended to be lower with audio computer-assisted self interview than with the other two methods. Combined with existing data from other countries and previous studies in Vietnam, these findings suggest that researchers should consider using audio computer-assisted self interview for future studies of sensitive and stigmatized topics, especially for men.

Web-Based Learning in the Computer-Aided Design Curriculum.

ERIC Educational Resources Information Center

Sung, Wen-Tsai; Ou, S. C.

2002-01-01

Applies principles of constructivism and virtual reality (VR) to computer-aided design (CAD) curriculum, particularly engineering, by integrating network, VR and CAD technologies into a Web-based learning environment that expands traditional two-dimensional computer graphics into a three-dimensional real-time simulation that enhances user…

Integrated Computer-Aided Drafting Instruction (ICADI).

ERIC Educational Resources Information Center

Chen, C. Y.; McCampbell, David H.

Until recently, computer-aided drafting and design (CAD) systems were almost exclusively operated on mainframes or minicomputers and their cost prohibited many schools from offering CAD instruction. Today, many powerful personal computers are capable of performing the high-speed calculation and analysis required by the CAD application; however,…

Impact of marriage on HIV/AIDS risk behaviors among impoverished, at-risk couples: a multilevel latent variable approach.

PubMed

Stein, Judith A; Nyamathi, Adeline; Ullman, Jodie B; Bentler, Peter M

2007-01-01

Studies among normative samples generally demonstrate a positive impact of marriage on health behaviors and other related attitudes. In this study, we examine the impact of marriage on HIV/AIDS risk behaviors and attitudes among impoverished, highly stressed, homeless couples, many with severe substance abuse problems. A multilevel analysis of 368 high-risk sexually intimate married and unmarried heterosexual couples assessed individual and couple-level effects on social support, substance use problems, HIV/AIDS knowledge, perceived HIV/AIDS risk, needle-sharing, condom use, multiple sex partners, and HIV/AIDS testing. More variance was explained in the protective and risk variables by couple-level latent variable predictors than by individual latent variable predictors, although some gender effects were found (e.g., more alcohol problems among men). The couple-level variable of marriage predicted lower perceived risk, less deviant social support, and fewer sex partners but predicted more needle-sharing.

Segmentation and detection of breast cancer in mammograms combining wavelet analysis and genetic algorithm.

PubMed

Pereira, Danilo Cesar; Ramos, Rodrigo Pereira; do Nascimento, Marcelo Zanchetta

2014-04-01

In Brazil, the National Cancer Institute (INCA) reports more than 50,000 new cases of the disease, with risk of 51 cases per 100,000 women. Radiographic images obtained from mammography equipments are one of the most frequently used techniques for helping in early diagnosis. Due to factors related to cost and professional experience, in the last two decades computer systems to support detection (Computer-Aided Detection - CADe) and diagnosis (Computer-Aided Diagnosis - CADx) have been developed in order to assist experts in detection of abnormalities in their initial stages. Despite the large number of researches on CADe and CADx systems, there is still a need for improved computerized methods. Nowadays, there is a growing concern with the sensitivity and reliability of abnormalities diagnosis in both views of breast mammographic images, namely cranio-caudal (CC) and medio-lateral oblique (MLO). This paper presents a set of computational tools to aid segmentation and detection of mammograms that contained mass or masses in CC and MLO views. An artifact removal algorithm is first implemented followed by an image denoising and gray-level enhancement method based on wavelet transform and Wiener filter. Finally, a method for detection and segmentation of masses using multiple thresholding, wavelet transform and genetic algorithm is employed in mammograms which were randomly selected from the Digital Database for Screening Mammography (DDSM). The developed computer method was quantitatively evaluated using the area overlap metric (AOM). The mean ± standard deviation value of AOM for the proposed method was 79.2 ± 8%. The experiments demonstrate that the proposed method has a strong potential to be used as the basis for mammogram mass segmentation in CC and MLO views. Another important aspect is that the method overcomes the limitation of analyzing only CC and MLO views. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

A Computer-Aided Diagnosis System for Breast Cancer Combining Digital Mammography and Genomics

DTIC Science & Technology

2006-05-01

Huang, "Breast cancer diagnosis using self-organizing map for sonography." Ultrasound Med. Biol. 26, 405 (2000). 20 K. Horsch, M.L. Giger, L.A. Venta ...L.A. Venta , "Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography." Acad Radiol 11, 272 (2004). 22 W. Chen...418. 27. Horsch K, Giger ML, Vyborny CJ, Venta LA. Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography

Computer-aided design of the RF-cavity for a high-power S-band klystron

NASA Astrophysics Data System (ADS)

Kant, D.; Bandyopadhyay, A. K.; Pal, D.; Meena, R.; Nangru, S. C.; Joshi, L. M.

2012-08-01

This article describes the computer-aided design of the RF-cavity for a S-band klystron operating at 2856 MHz. State-of-the-art electromagnetic simulation tools SUPERFISH, CST Microwave studio, HFSS and MAGIC have been used for cavity design. After finalising the geometrical details of the cavity through simulation, it has been fabricated and characterised through cold testing. Detailed results of the computer-aided simulation and cold measurements are presented in this article.

Computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems

NASA Astrophysics Data System (ADS)

Ku, Walter H.; Gang, Guan-Wan; He, J. Q.; Ichitsubo, I.

1988-05-01

This final technical report presents results on the computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems. New results include analytical and computer aided device models of GaAs MESFETs and HEMTs or MODFETs, new synthesis techniques for monolithic feedback and distributed amplifiers and a new nonlinear CAD program for MIMIC called CADNON. This program incorporates the new MESFET and HEMT model and has been successfully applied to the design of monolithic millimeter-wave mixers.

An Interactive Computer Aided Design and Analysis Package.

DTIC Science & Technology

1986-03-01

Al-A167 114 AN INTERACTIVE COMPUTER AIDED DESIGN MUD ANAILYSIS 1/𔃼 PACKAGE(U) NAVAL POSTGRADUATE SCHOOL NONTEREY CA T L EUALD "AR 86 UNCLSSIFIED F... SCHOOL Monterey, California DTIC .LECTE MAYOS THESIS AN INTERACTIVE COMPUTER AIDED DESIGN AND ANALYSIS PACKAGE by Terrence L. Ewald March 1986 jThesis...ORGANIZATION Naval Postgraduate School (if dAp90h81111) Naval Postgraduate School . 62A 6C. ADDRESS (0ty. State, and ZIP Code) 7b. ADDRESS (City State. and

The Influence of Knowing Someone with AIDS on Youth HIV Sexual Risk Behaviors

ERIC Educational Resources Information Center

Cederbaum, Julie A.; Marcus, Steven C.; Hutchinson, M. Katherine

2007-01-01

Research indicates that knowing someone with HIV/AIDS is associated with greater perceived risk of contracting HIV and changes in sexual risk behaviors. The current study with a sample of 1,172 examined whether knowing someone with HIV/AIDS influenced sexual risk communication and youth engagement in sexual intercourse using the Philadelphia…

Structural Analysis Made 'NESSUSary'

NASA Technical Reports Server (NTRS)

2005-01-01

Everywhere you look, chances are something that was designed and tested by a computer will be in plain view. Computers are now utilized to design and test just about everything imaginable, from automobiles and airplanes to bridges and boats, and elevators and escalators to streets and skyscrapers. Computer-design engineering first emerged in the 1970s, in the automobile and aerospace industries. Since computers were in their infancy, however, architects and engineers during the time were limited to producing only designs similar to hand-drafted drawings. (At the end of 1970s, a typical computer-aided design system was a 16-bit minicomputer with a price tag of $125,000.) Eventually, computers became more affordable and related software became more sophisticated, offering designers the "bells and whistles" to go beyond the limits of basic drafting and rendering, and venture into more skillful applications. One of the major advancements was the ability to test the objects being designed for the probability of failure. This advancement was especially important for the aerospace industry, where complicated and expensive structures are designed. The ability to perform reliability and risk assessment without using extensive hardware testing is critical to design and certification. In 1984, NASA initiated the Probabilistic Structural Analysis Methods (PSAM) project at Glenn Research Center to develop analysis methods and computer programs for the probabilistic structural analysis of select engine components for current Space Shuttle and future space propulsion systems. NASA envisioned that these methods and computational tools would play a critical role in establishing increased system performance and durability, and assist in structural system qualification and certification. Not only was the PSAM project beneficial to aerospace, it paved the way for a commercial risk- probability tool that is evaluating risks in diverse, down- to-Earth application

Issues in the Perception of AIDS Risk and Risk Reduction Activities by Black and Hispanic/Latina Women

PubMed Central

Mays, Vickie M.; Cochran, Susan D.

2014-01-01

Although to date most cases of Acquired Immunodeficiency Syndrome (AIDS) have occurred among men, AIDS poses a serious threat for Black and Latina women, particularly for those who are poor and live in geographic areas of higher AIDS incidence. Yet many may not perceive themselves to be at risk from what has generally been portrayed as a “White gay disease.” This article examines patterns of AIDS infection in women and factors associated with risk perception and behavior change. In doing so, the influence of ethnic minority culture on the behavior of individual women is explored. PMID:3214007

The combined use of computer-guided, minimally invasive, flapless corticotomy and clear aligners as a novel approach to moderate crowding: A case report

PubMed Central

Cassetta, Michele; Altieri, Federica; Pandolfi, Stefano; Giansanti, Matteo

2017-01-01

The aim of this case report was to describe an innovative orthodontic treatment method that combined surgical and orthodontic techniques. The novel method was used to achieve a positive result in a case of moderate crowding by employing a computer-guided piezocision procedure followed by the use of clear aligners. A 23-year-old woman had a malocclusion with moderate crowding. Her periodontal indices, oral health-related quality of life (OHRQoL), and treatment time were evaluated. The treatment included interproximal corticotomy cuts extending through the entire thickness of the cortical layer, without a full-thickness flap reflection. This was achieved with a three-dimensionally printed surgical guide using computer-aided design and computer-aided manufacturing. Orthodontic force was applied to the teeth immediately after surgery by using clear appliances for better control of tooth movement. The total treatment time was 8 months. The periodontal indices improved after crowding correction, but the oral health impact profile showed a slight deterioration of OHRQoL during the 3 days following surgery. At the 2-year retention follow-up, the stability of treatment was excellent. The reduction in surgical time and patient discomfort, increased periodontal safety and patient acceptability, and accurate control of orthodontic movement without the risk of losing anchorage may encourage the use of this combined technique in appropriate cases. PMID:28337422

The combined use of computer-guided, minimally invasive, flapless corticotomy and clear aligners as a novel approach to moderate crowding: A case report.

PubMed

Cassetta, Michele; Altieri, Federica; Pandolfi, Stefano; Giansanti, Matteo

2017-03-01

The aim of this case report was to describe an innovative orthodontic treatment method that combined surgical and orthodontic techniques. The novel method was used to achieve a positive result in a case of moderate crowding by employing a computer-guided piezocision procedure followed by the use of clear aligners. A 23-year-old woman had a malocclusion with moderate crowding. Her periodontal indices, oral health-related quality of life (OHRQoL), and treatment time were evaluated. The treatment included interproximal corticotomy cuts extending through the entire thickness of the cortical layer, without a full-thickness flap reflection. This was achieved with a three-dimensionally printed surgical guide using computer-aided design and computer-aided manufacturing. Orthodontic force was applied to the teeth immediately after surgery by using clear appliances for better control of tooth movement. The total treatment time was 8 months. The periodontal indices improved after crowding correction, but the oral health impact profile showed a slight deterioration of OHRQoL during the 3 days following surgery. At the 2-year retention follow-up, the stability of treatment was excellent. The reduction in surgical time and patient discomfort, increased periodontal safety and patient acceptability, and accurate control of orthodontic movement without the risk of losing anchorage may encourage the use of this combined technique in appropriate cases.

Computer Aided Creativity.

ERIC Educational Resources Information Center

Proctor, Tony

1988-01-01

Explores the conceptual components of a computer program designed to enhance creative thinking and reviews software that aims to stimulate creative thinking. Discusses BRAIN and ORACLE, programs intended to aid in creative problem solving. (JOW)

Prerequisites for Computer-Aided Cognitive Rehabilitation.

ERIC Educational Resources Information Center

Legrand, Colette

1989-01-01

This paper describes computer-aided cognitive rehabilitation for mentally deficient persons. It lists motor, cognitive, emotional, and educational prerequisites to such rehabilitation and states advantages and disadvantages in using the prerequisites. (JDD)

Micro and Mainframe Computer Models for Improved Planning in Awarding Financial Aid to Disadvantaged Students.

ERIC Educational Resources Information Center

Attinasi, Louis C., Jr.; Fenske, Robert H.

1988-01-01

Two computer models used at Arizona State University recognize the tendency of students from low-income and minority backgrounds to apply for assistance late in the funding cycle. They permit administrators to project the amount of aid needed by such students. The Financial Aid Computerized Tracking System is described. (Author/MLW)

A Computer-Based, Interactive Videodisc Job Aid and Expert System for Electron Beam Lithography Integration and Diagnostic Procedures.

ERIC Educational Resources Information Center

Stevenson, Kimberly

This master's thesis describes the development of an expert system and interactive videodisc computer-based instructional job aid used for assisting in the integration of electron beam lithography devices. Comparable to all comprehensive training, expert system and job aid development require a criterion-referenced systems approach treatment to…

Incorporation of CAD/CAM Restoration Into Navy Dentistry

DTIC Science & Technology

2017-09-26

CAD/CAM Computer-aided design /Computer-assisted manufacturing CDT Common Dental Terminology DENCAS Dental Common Access System DTF Dental...to reduce avoidable dental emergencies for deployed sailors and marines. Dental Computer-aided design /Computer-assisted manufacturing (CAD/CAM...report will review and evaluate the placement rate by Navy dentists of digitally fabricated in-office ceramic restorations compared to traditional direct

The Role of Computer-Aided Instruction in Science Courses and the Relevant Misconceptions of Pre-Service Teachers

ERIC Educational Resources Information Center

Aksakalli, Ayhan; Turgut, Umit; Salar, Riza

2016-01-01

This research aims to investigate the ways in which pre-service physics teachers interact with computers, which, as an indispensable means of today's technology, are of major value in education and training, and to identify any misconceptions said teachers may have about computer-aided instruction. As part of the study, computer-based physics…

Student Performance in Computer-Assisted Instruction in Programming.

ERIC Educational Resources Information Center

Friend, Jamesine E.; And Others

A computer-assisted instructional system to teach college students the computer language, AID (Algebraic Interpretive Dialogue), two control programs, and data collected by the two control programs are described. It was found that although first response errors were often those of AID syntax, such errors were easily corrected. Secondly, while…

Cooperation Support in Computer-Aided Authoring and Learning.

ERIC Educational Resources Information Center

Muhlhauser, Max; Rudebusch, Tom

This paper discusses the use of Computer Supported Cooperative Work (CSCW) techniques for computer-aided learning (CAL); the work was started in the context of project Nestor, a joint effort of German universities about cooperative multimedia authoring/learning environments. There are four major categories of cooperation for CAL: author/author,…

Computer-Assisted Instruction: One Aid for Teachers of Reading.

ERIC Educational Resources Information Center

Rauch, Margaret; Samojeden, Elizabeth

Computer assisted instruction (CAI), an instructional system with direct interaction between the student and the computer, can be a valuable aid for presenting new concepts, for reinforcing of selective skills, and for individualizing instruction. The advantages CAI provides include self-paced learning, more efficient allocation of classroom time,…

Total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and computer-aided designed and manufactured surgical splints: a favorable combination of three techniques in the management of severe mouth asymmetry in Parry-Romberg syndrome.

PubMed

Scolozzi, Paolo; Herzog, Georges

2014-05-01

Although its pathogenesis remains obscure, Parry-Romberg syndrome (PRS) has been associated with the linear scleroderma en coup de sabre. PRS is characterized by unilateral facial atrophy of the skin, subcutaneous tissue, muscles, and bones with at least 1 dermatome supplied by the trigeminal nerve. Facial asymmetry represents the most common sequela and can involve the soft tissues, craniomaxillofacial skeleton, dentoalveolar area, and temporomandibular joint. Although orthognathic procedures have been reported for skeletal reconstruction, treatment of facial asymmetry has been directed to augmentation of the soft tissue volume on the atrophic side using different recontouring or volumetric augmentation techniques. Total mandibular subapical osteotomy has been used in the management of dentofacial deformities, such as open bite and mandibular dentoalveolar retrusion or protrusion associated with an imbalance between the lower lip and the chin. Management of orthognathic procedures has been improved by the recent introduction of stereolithographic surgical splints using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology and piezosurgery. Piezosurgery has increased security during surgery, especially for delicate procedures associated with a high risk of nerve injury. The present report describes a combined total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and surgical splints fabricated using CAD and CAM for the correction of severe mouth asymmetry related to vertical dentoalveolar disharmony in a patient with PRS. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Using computer technology for HIV prevention among African-Americans: development of a tailored information program for safer sex (TIPSS)

PubMed Central

Noar, Seth M.; Webb, Elizabeth M.; Van Stee, Stephanie K.; Redding, Colleen A.; Feist-Price, Sonja; Crosby, Richard; Troutman, Adewale

2011-01-01

New prevention options are urgently needed for African-Americans in the United States given the disproportionate impact of HIV/AIDS on this group. This combined with recent evidence supporting the efficacy of computer technology-based interventions in HIV prevention led our research group to pursue the development of a computer-delivered individually tailored intervention for heterosexually active African-Americans—the tailored information program for safer sex (TIPSS). In the current article, we discuss the development of the TIPSS program, including (i) the targeted population and behavior, (ii) theoretical basis for the intervention, (iii) design of the intervention, (iv) formative research, (v) technical development and testing and (vi) intervention delivery and ongoing randomized controlled trial. Given the many advantages of computer-based interventions, including low-cost delivery once developed, they offer much promise for the future of HIV prevention among African-Americans and other at-risk groups. PMID:21257676

Computer-aided design of high-frequency transistor amplifiers.

NASA Technical Reports Server (NTRS)

Hsieh, C.-C.; Chan, S.-P.

1972-01-01

A systematic step-by-step computer-aided procedure for designing high-frequency transistor amplifiers is described. The technique makes it possible to determine the optimum source impedance which gives a minimum noise figure.

Three-dimensional surgical simulation.

PubMed

Cevidanes, Lucia H C; Tucker, Scott; Styner, Martin; Kim, Hyungmin; Chapuis, Jonas; Reyes, Mauricio; Proffit, William; Turvey, Timothy; Jaskolka, Michael

2010-09-01

In this article, we discuss the development of methods for computer-aided jaw surgery, which allows us to incorporate the high level of precision necessary for transferring virtual plans into the operating room. We also present a complete computer-aided surgery system developed in close collaboration with surgeons. Surgery planning and simulation include construction of 3-dimensional surface models from cone-beam computed tomography, dynamic cephalometry, semiautomatic mirroring, interactive cutting of bone, and bony segment repositioning. A virtual setup can be used to manufacture positioning splints for intraoperative guidance. The system provides further intraoperative assistance with a computer display showing jaw positions and 3-dimensional positioning guides updated in real time during the surgical procedure. The computer-aided surgery system aids in dealing with complex cases with benefits for the patient, with surgical practice, and for orthodontic finishing. Advanced software tools for diagnosis and treatment planning allow preparation of detailed operative plans, osteotomy repositioning, bone reconstructions, surgical resident training, and assessing the difficulties of the surgical procedures before the surgery. Computer-aided surgery can make the elaboration of the surgical plan a more flexible process, increase the level of detail and accuracy of the plan, yield higher operative precision and control, and enhance documentation of cases. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Beliefs and Perception About HIV/AIDS, Self-Efficacy, and HIV Sexual Risk Behaviors Among Young Thai Men Who Have Sex With Men.

PubMed

Khumsaen, Natawan; Stephenson, Rob

2017-04-01

This study examined the relationships of HIV/AIDS beliefs, self-efficacy for AIDS preventive behaviors, perception of HIV as a chronic disease, and HIV risk behaviors among young Thai men who have sex with men. Participants were recruited for a self-administered anonymous survey through Facebook. Logistic regression analysis was used to identify factors associated with each of four HIV risk behavior outcomes. Factors associated with sexual risk behaviors included age (18 and 21 years), having a current regular male partner, self-efficacy for AIDS preventive behaviors (self-efficacy in refusing sexual intercourse, self-efficacy in questioning potential sex partners, and self-efficacy in condom use), AIDS health belief (perceived susceptibility to HIV/AIDS, perceived severity of HIV/AIDS, perceived barriers to condom use, and cues to action for HIV/AIDS prevention), and perception of HIV/AIDS as a chronic disease (perceived HIV sero-status disclosure). Knowledge generated from this study has the potential to inform prevention messages for young Thai MSM.

Evaluating the distance between the femoral tunnel centers in anatomic double-bundle anterior cruciate ligament reconstruction using a computer simulation

PubMed Central

Tashiro, Yasutaka; Okazaki, Ken; Iwamoto, Yukihide

2015-01-01

Purpose We aimed to clarify the distance between the anteromedial (AM) bundle and posterolateral (PL) bundle tunnel-aperture centers by simulating the anatomical femoral tunnel placement during double-bundle anterior cruciate ligament reconstruction using 3-D computer-aided design models of the knee, in order to discuss the risk of tunnel overlap. Relationships between the AM to PL center distance, body height, and sex difference were also analyzed. Patients and methods The positions of the AM and PL tunnel centers were defined based on previous studies using the quadrant method, and were superimposed anatomically onto the 3-D computer-aided design knee models from 68 intact femurs. The distance between the tunnel centers was measured using the 3-D DICOM software package. The correlation between the AM–PL distance and the subject’s body height was assessed, and a cutoff height value for a higher risk of overlap of the AM and PL tunnel apertures was identified. Results The distance between the AM and PL centers was 10.2±0.6 mm in males and 9.4±0.5 mm in females (P<0.01). The AM–PL center distance demonstrated good correlation with body height in both males (r=0.66, P<0.01) and females (r=0.63, P<0.01). When 9 mm was defined as the critical distance between the tunnel centers to preserve a 2 mm bony bridge between the two tunnels, the cutoff value was calculated to be a height of 160 cm in males and 155 cm in females. Conclusion When AM and PL tunnels were placed anatomically in simulated double-bundle anterior cruciate ligament reconstruction, the distance between the two tunnel centers showed a strong positive correlation with body height. In cases with relatively short stature, the AM and PL tunnel apertures are considered to be at a higher risk of overlap when surgeons choose the double-bundle technique. PMID:26170727

Spectrum of cancer risk late after AIDS onset in the United States.

PubMed

Simard, Edgar P; Pfeiffer, Ruth M; Engels, Eric A

2010-08-09

Persons living with AIDS today remain at elevated cancer risk. Highly active antiretroviral therapy (HAART), widely available since 1996, prolongs life, but immune function is not fully restored. We conducted this study to assess long-term cancer risk among persons with AIDS relative to the general population and the impact of HAART on cancer incidence. Records of 263 254 adults and adolescents with AIDS (1980-2004) from 15 US regions were matched to cancer registries to capture incident cancers during years 3 through 5 and 6 through 10 after AIDS onset. Standardized incidence ratios (SIRs) were used to assess risks relative to the general population. Rate ratios (RRs) were used to compare cancer incidence before and after 1996 to assess the impact of availability of HAART. Risk was elevated for the 2 major AIDS-defining cancers: Kaposi sarcoma (SIRs, 5321 and 1347 in years 3-5 and 6-10, respectively) and non-Hodgkin lymphoma (SIRs, 32 and 15). Incidence of both malignancies declined in the HAART era (1996-2006). Risk was elevated for all non-AIDS-defining cancers combined (SIRs, 1.7 and 1.6 in years 3-5 and 6-10, respectively) and for the following specific non-AIDS-defining cancers: Hodgkin lymphoma and cancers of the oral cavity and/or pharynx, tongue, anus, liver, larynx, lung and/or bronchus, and penis. Anal cancer incidence increased between 1990-1995 and 1996-2006 (RR, 2.9; 95% confidence interval [CI], 2.1-4.0), as did that of Hodgkin lymphoma (RR, 2.0; 95% CI, 1.3-2.9). Among people who survived for several years or more after an AIDS diagnosis, we observed high risks of AIDS-defining cancers and increasing incidence of anal cancer and Hodgkin lymphoma.

Computer simulation of stair falls to investigate scenarios in child abuse.

PubMed

Bertocci, G E; Pierce, M C; Deemer, E; Aguel, F

2001-09-01

To demonstrate the usefulness of computer simulation techniques in the investigation of pediatric stair falls. Since stair falls are a common falsely reported injury scenario in child abuse, our specific aim was to investigate the influence of stair characteristics on injury biomechanics of pediatric stair falls by using a computer simulation model. Our long-term goal is to use knowledge of biomechanics to aid in distinguishing between accidents and abuse. A computer simulation model of a 3-year-old child falling down stairs was developed using commercially available simulation software. This model was used to investigate the influence that stair characteristics have on biomechanical measures associated with injury risk. Since femur fractures occur in unintentional and abuse scenarios, biomechanical measures were focused on the lower extremities. The number and slope of steps and stair surface friction and elasticity were found to affect biomechanical measures associated with injury risk. Computer simulation techniques are useful for investigating the biomechanics of stair falls. Using our simulation model, we determined that stair characteristics have an effect on potential for lower extremity injuries. Although absolute values of biomechanical measures should not be relied on in an unvalidated model such as this, relationships between accident-environment factors and biomechanical measures can be studied through simulation. Future efforts will focus on model validation.

Behavioral Risk Factors for AIDS among Adolescents.

ERIC Educational Resources Information Center

Millstein, Susan G.

This document examines the incidence of Acquired Immune Deficiency Syndrome (AIDS) among adolescents in the United States and identifies several risk factors for AIDS among this population. It classifies adolescents' risk for contracting human immunodeficiency virus (HIV) infection by the degree to which adolescents engage in behaviors that are…

Assessment of AIDS Risk among Treatment Seeking Drug Abusers.

ERIC Educational Resources Information Center

Black, John L.; And Others

Intravenous (IV) drug abusers are at risk for contracting transmittable diseases such as acquired immunodeficiency syndrome (AIDS) and hepatitis B. This study was conducted to investigate the prevalence of risk behaviors for acquiring and transmitting AIDS and hepatitis B among treatment-seeking drug abusers (N=168). Subjects participated in a…

Pattern of cancer risk in persons with AIDS in Italy in the HAART era

PubMed Central

Dal Maso, L; Polesel, J; Serraino, D; Lise, M; Piselli, P; Falcini, F; Russo, A; Intrieri, T; Vercelli, M; Zambon, P; Tagliabue, G; Zanetti, R; Federico, M; Limina, R M; Mangone, L; De Lisi, V; Stracci, F; Ferretti, S; Piffer, S; Budroni, M; Donato, A; Giacomin, A; Bellù, F; Fusco, M; Madeddu, A; Vitarelli, S; Tessandori, R; Tumino, R; Suligoi, B; Franceschi, S

2009-01-01

A record-linkage study was carried out between the Italian AIDS Registry and 24 Italian cancer registries to compare cancer excess among persons with HIV/AIDS (PWHA) before and after the introduction of highly active antiretroviral therapy (HAART) in 1996. Standardised incidence ratios (SIR) were computed in 21951 AIDS cases aged 16–69 years reported between 1986 and 2005. Of 101 669 person-years available, 45 026 were after 1996. SIR for Kaposi sarcoma (KS) and non-Hodgkin lymphoma greatly decreased in 1997–2004 compared with 1986–1996, but high SIRs for KS persisted in the increasingly large fraction of PWHA who had an interval of <1 year between first HIV-positive test and AIDS diagnosis. A significant excess of liver cancer (SIR=6.4) emerged in 1997–2004, whereas the SIRs for cancer of the cervix (41.5), anus (44.0), lung (4.1), brain (3.2), skin (non-melanoma, 1.8), Hodgkin lymphoma (20.7), myeloma (3.9), and non-AIDS-defining cancers (2.2) were similarly elevated in the two periods. The excess of some potentially preventable cancers in PWHA suggests that HAART use must be accompanied by cancer-prevention strategies, notably antismoking and cervical cancer screening programmes. Improvements in the timely identification of HIV-positive individuals are also a priority in Italy to avoid the adverse consequences of delayed HAART use. PMID:19223894

Space Spurred Computer Graphics

NASA Technical Reports Server (NTRS)

1983-01-01

Dicomed Corporation was asked by NASA in the early 1970s to develop processing capabilities for recording images sent from Mars by Viking spacecraft. The company produced a film recorder which increased the intensity levels and the capability for color recording. This development led to a strong technology base resulting in sophisticated computer graphics equipment. Dicomed systems are used to record CAD (computer aided design) and CAM (computer aided manufacturing) equipment, to update maps and produce computer generated animation.

A Novel Computer-Aided Design/Computer-Assisted Manufacture Method for One-Piece Removable Partial Denture and Evaluation of Fit.

PubMed

Ye, Hongqiang; Li, Xinxin; Wang, Guanbo; Kang, Jing; Liu, Yushu; Sun, Yuchun; Zhou, Yongsheng

2018-02-15

To investigate a computer-aided design/computer-aided manufacturing (CAD/CAM) process for producing one-piece removable partial dentures (RPDs) and to evaluate their fits in vitro. A total of 15 one-piece RPDs were designed using dental CAD and reverse engineering software and then fabricated with polyetheretherketone (PEEK) using CAM. The gaps between RPDs and casts were measured and compared with traditional cast framework RPDs. Gaps were lower for one-piece PEEK RPDs compared to traditional RPDs. One-piece RPDs can be manufactured by CAD/CAM, and their fits were better than those of traditional RPDs.

Effect of Computer-Presented Organizational/Memory Aids on Problem Solving Behavior.

ERIC Educational Resources Information Center

Steinberg, Esther R.; And Others

This research studied the effects of computer-presented organizational/memory aids on problem solving behavior. The aids were either matrix or verbal charts shown on the display screen next to the problem. The 104 college student subjects were randomly assigned to one of the four conditions: type of chart (matrix or verbal chart) and use of charts…

Programming Design Guide for Computer Implementation of Job Aid for Selecting Instructional Setting. Final Report.

ERIC Educational Resources Information Center

Schulz, Russel E.; And Others

This Programming Design Guide (PDG) was developed to permit the offline Job Aid for Selecting Instructional Setting, which is one of 13 job aids presently available for use with the Instructional Systems Development (ISD) model, to be available in an inquiry-type, online version. It is intended to provide computer programmers with all of the…

Teaching Advance Care Planning to Medical Students with a Computer-Based Decision Aid

PubMed Central

Levi, Benjamin H.

2013-01-01

Discussing end-of-life decisions with cancer patients is a crucial skill for physicians. This article reports findings from a pilot study evaluating the effectiveness of a computer-based decision aid for teaching medical students about advance care planning. Second-year medical students at a single medical school were randomized to use a standard advance directive or a computer-based decision aid to help patients with advance care planning. Students' knowledge, skills, and satisfaction were measured by self-report; their performance was rated by patients. 121/133 (91%) of students participated. The Decision-Aid Group (n=60) outperformed the Standard Group (n=61) in terms of students´ knowledge (p<0.01), confidence in helping patients with advance care planning (p<0.01), knowledge of what matters to patients (p=0.05), and satisfaction with their learning experience (p<0.01). Likewise, patients in the Decision Aid Group were more satisfied with the advance care planning method (p<0.01) and with several aspects of student performance. Use of a computer-based decision aid may be an effective way to teach medical students how to discuss advance care planning with cancer patients. PMID:20632222

Evaluation of direct and indirect additive manufacture of maxillofacial prostheses.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter; Ji, Lu

2012-09-01

The efficacy of computer-aided technologies in the design and manufacture of maxillofacial prostheses has not been fully proven. This paper presents research into the evaluation of direct and indirect additive manufacture of a maxillofacial prosthesis against conventional laboratory-based techniques. An implant/magnet-retained nasal prosthesis case from a UK maxillofacial unit was selected as a case study. A benchmark prosthesis was fabricated using conventional laboratory-based techniques for comparison against additive manufactured prostheses. For the computer-aided workflow, photogrammetry, computer-aided design and additive manufacture (AM) methods were evaluated in direct prosthesis body fabrication and indirect production using an additively manufactured mould. Qualitative analysis of position, shape, colour and edge quality was undertaken. Mechanical testing to ISO standards was also used to compare the silicone rubber used in the conventional prosthesis with the AM material. Critical evaluation has shown that utilising a computer-aided work-flow can produce a prosthesis body that is comparable to that produced using existing best practice. Technical limitations currently prevent the direct fabrication method demonstrated in this paper from being clinically viable. This research helps prosthesis providers understand the application of a computer-aided approach and guides technology developers and researchers to address the limitations identified.

Computational modelling of the impact of AIDS on business.

PubMed

Matthews, Alan P

2007-07-01

An overview of computational modelling of the impact of AIDS on business in South Africa, with a detailed description of the AIDS Projection Model (APM) for companies, developed by the author, and suggestions for further work. Computational modelling of the impact of AIDS on business in South Africa requires modelling of the epidemic as a whole, and of its impact on a company. This paper gives an overview of epidemiological modelling, with an introduction to the Actuarial Society of South Africa (ASSA) model, the most widely used such model for South Africa. The APM produces projections of HIV prevalence, new infections, and AIDS mortality on a company, based on the anonymous HIV testing of company employees, and projections from the ASSA model. A smoothed statistical model of the prevalence test data is computed, and then the ASSA model projection for each category of employees is adjusted so that it matches the measured prevalence in the year of testing. FURTHER WORK: Further techniques that could be developed are microsimulation (representing individuals in the computer), scenario planning for testing strategies, and models for the business environment, such as models of entire sectors, and mapping of HIV prevalence in time and space, based on workplace and community data.

Exploration of a physiologically-inspired hearing-aid algorithm using a computer model mimicking impaired hearing.

PubMed

Jürgens, Tim; Clark, Nicholas R; Lecluyse, Wendy; Meddis, Ray

2016-01-01

To use a computer model of impaired hearing to explore the effects of a physiologically-inspired hearing-aid algorithm on a range of psychoacoustic measures. A computer model of a hypothetical impaired listener's hearing was constructed by adjusting parameters of a computer model of normal hearing. Absolute thresholds, estimates of compression, and frequency selectivity (summarized to a hearing profile) were assessed using this model with and without pre-processing the stimuli by a hearing-aid algorithm. The influence of different settings of the algorithm on the impaired profile was investigated. To validate the model predictions, the effect of the algorithm on hearing profiles of human impaired listeners was measured. A computer model simulating impaired hearing (total absence of basilar membrane compression) was used, and three hearing-impaired listeners participated. The hearing profiles of the model and the listeners showed substantial changes when the test stimuli were pre-processed by the hearing-aid algorithm. These changes consisted of lower absolute thresholds, steeper temporal masking curves, and sharper psychophysical tuning curves. The hearing-aid algorithm affected the impaired hearing profile of the model to approximate a normal hearing profile. Qualitatively similar results were found with the impaired listeners' hearing profiles.

Program Aids Specification Of Multiple-Block Grids

NASA Technical Reports Server (NTRS)

Sorenson, R. L.; Mccann, K. M.

1993-01-01

3DPREP computer program aids specification of multiple-block computational grids. Highly interactive graphical preprocessing program designed for use on powerful graphical scientific computer workstation. Divided into three main parts, each corresponding to principal graphical-and-alphanumerical display. Relieves user of some burden of collecting and formatting many data needed to specify blocks and grids, and prepares input data for NASA's 3DGRAPE grid-generating computer program.

A lifetime portfolio of risky and risk-free sexual behaviour and the prevalence of AIDS.

PubMed

Levy, Amnon

2002-11-01

A lifetime portfolio of risky and risk-free sexual activities is conceptually constructed in this paper. People's time allocation between risky and risk-free sexual activities affects, and is affected by, the prevalence of AIDS. A small satisfaction differential between risky and risk-free sex can lead to a significant prevalence of AIDS. Numerical simulations suggest that the reduction in the prevalence of AIDS generated by a 1% improvement in the sensual quality of freely distributed condoms can be 0.855% when the initial satisfaction differential between risky and risk-free sex is 50% or 0.464% when the initial satisfaction differential is 100%.

Computer Aided Phenomenography: The Role of Leximancer Computer Software in Phenomenographic Investigation

ERIC Educational Resources Information Center

Penn-Edwards, Sorrel

2010-01-01

The qualitative research methodology of phenomenography has traditionally required a manual sorting and analysis of interview data. In this paper I explore a potential means of streamlining this procedure by considering a computer aided process not previously reported upon. Two methods of lexicological analysis, manual and automatic, were examined…

Computer-Aided College Algebra: Learning Components that Students Find Beneficial

ERIC Educational Resources Information Center

Aichele, Douglas B.; Francisco, Cynthia; Utley, Juliana; Wescoatt, Benjamin

2011-01-01

A mixed-method study was conducted during the Fall 2008 semester to better understand the experiences of students participating in computer-aided instruction of College Algebra using the software MyMathLab. The learning environment included a computer learning system for the majority of the instruction, a support system via focus groups (weekly…

Computer Aided Instruction: A Study of Student Evaluations and Academic Performance

ERIC Educational Resources Information Center

Collins, David; Deck, Alan; McCrickard, Myra

2008-01-01

Computer aided instruction (CAI) encompasses a broad range of computer technologies that supplement the classroom learning environment and can dramatically increase a student's access to information. Criticism of CAI generally focuses on two issues: it lacks an adequate foundation in educational theory and the software is difficult to implement…

Using Computer Graphics in the 90's.

ERIC Educational Resources Information Center

Towne, Violet A.

Computer-Aided Design, a hands-on program for public school teachers, was first offered in the summer of 1987 as an outgrowth of a 1986 robotics training program. Area technology teachers needed computer-aided design (CAD) training because of a New York State Education system transition from the industrial arts curriculum to a new curriculum in…

Using Computer-Aided Instruction to Support the Systematic Practice of Phonological Skills in Beginning Readers

ERIC Educational Resources Information Center

Wild, Mary

2009-01-01

The paper reports the results of a randomised control trial investigating the use of computer-aided instruction (CAI) for practising phonological awareness skills with beginning readers. Two intervention groups followed the same phonological awareness programme: one group undertook practice exercises using a computer and the other group undertook…

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

Computer Code Aids Design Of Wings

NASA Technical Reports Server (NTRS)

Carlson, Harry W.; Darden, Christine M.

1993-01-01

AERO2S computer code developed to aid design engineers in selection and evaluation of aerodynamically efficient wing/canard and wing/horizontal-tail configurations that includes simple hinged-flap systems. Code rapidly estimates longitudinal aerodynamic characteristics of conceptual airplane lifting-surface arrangements. Developed in FORTRAN V on CDC 6000 computer system, and ported to MS-DOS environment.

Computer Aided Grid Interface: An Interactive CFD Pre-Processor

NASA Technical Reports Server (NTRS)

Soni, Bharat K.

1997-01-01

NASA maintains an applications oriented computational fluid dynamics (CFD) efforts complementary to and in support of the aerodynamic-propulsion design and test activities. This is especially true at NASA/MSFC where the goal is to advance and optimize present and future liquid-fueled rocket engines. Numerical grid generation plays a significant role in the fluid flow simulations utilizing CFD. An overall goal of the current project was to develop a geometry-grid generation tool that will help engineers, scientists and CFD practitioners to analyze design problems involving complex geometries in a timely fashion. This goal is accomplished by developing the CAGI: Computer Aided Grid Interface system. The CAGI system is developed by integrating CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) geometric system output and/or Initial Graphics Exchange Specification (IGES) files (including all the NASA-IGES entities), geometry manipulations and generations associated with grid constructions, and robust grid generation methodologies. This report describes the development process of the CAGI system.

Computer Aided Grid Interface: An Interactive CFD Pre-Processor

NASA Technical Reports Server (NTRS)

Soni, Bharat K.

1996-01-01

NASA maintains an applications oriented computational fluid dynamics (CFD) efforts complementary to and in support of the aerodynamic-propulsion design and test activities. This is especially true at NASA/MSFC where the goal is to advance and optimize present and future liquid-fueled rocket engines. Numerical grid generation plays a significant role in the fluid flow simulations utilizing CFD. An overall goal of the current project was to develop a geometry-grid generation tool that will help engineers, scientists and CFD practitioners to analyze design problems involving complex geometries in a timely fashion. This goal is accomplished by developing the Computer Aided Grid Interface system (CAGI). The CAGI system is developed by integrating CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) geometric system output and / or Initial Graphics Exchange Specification (IGES) files (including all the NASA-IGES entities), geometry manipulations and generations associated with grid constructions, and robust grid generation methodologies. This report describes the development process of the CAGI system.

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

The risk of hepatocellular carcinoma among individuals with acquired immunodeficiency syndrome in the United States.

PubMed

Sahasrabuddhe, Vikrant V; Shiels, Meredith S; McGlynn, Katherine A; Engels, Eric A

2012-12-15

Hepatocellular carcinoma (HCC) is a concern among individuals with human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS). The authors analyzed population-based registry linkage data from the US HIV/AIDS Cancer Match Study (1980-2009) to examine the risk and trends of HCC among individuals with AIDS. Standardized incidence ratios (SIRs) were used to measure HCC risk relative to the general population, and Poisson regression was used to calculate incidence rate ratios (RR) comparing incidence among individuals with AIDS. People with AIDS were categorized according to their HIV risk group into high and low hepatitis C virus (HCV) prevalence groups based on their HIV transmission risk category. Among 615,150 individuals with AIDS, HCC risk was elevated almost 4 times compared with the risk in the general population (N = 366; SIR, 3.8; 95% confidence interval, 3.5-4.3). Although HCC incidence increased steadily across calendar periods (P(trend) < .0001; adjusted for sex and age), the excess risk in individuals with AIDS compared with the general population remained somewhat constant (SIRs range, 3.5-3.9) between the monotherapy/dual therapy era (1990-1995) and the recent highly active antiretroviral therapy era (2001-2009). In a multivariate model adjusting for sex, race/ethnicity, and attained calendar period, HCC incidence increased with advancing age (P(trend) < .0001) and was associated with HIV risk groups with a known higher prevalence of HCV (adjusted RR, 2.2; 95% confidence interval, 1.8-2.8). HCC incidence in individuals with AIDS has increased over time despite improved HIV treatment regimens, likely reflecting prolonged survival with chronic liver disease. The high incidence in older adults suggests that this cancer will increase in importance with aging of the HIV-infected population. Published 2012 American Cancer Society.

Designing Visual Aids That Promote Risk Literacy: A Systematic Review of Health Research and Evidence-Based Design Heuristics.

PubMed

Garcia-Retamero, Rocio; Cokely, Edward T

2017-06-01

Background Effective risk communication is essential for informed decision making. Unfortunately, many people struggle to understand typical risk communications because they lack essential decision-making skills. Objective The aim of this study was to review the literature on the effect of numeracy on risk literacy, decision making, and health outcomes, and to evaluate the benefits of visual aids in risk communication. Method We present a conceptual framework describing the influence of numeracy on risk literacy, decision making, and health outcomes, followed by a systematic review of the benefits of visual aids in risk communication for people with different levels of numeracy and graph literacy. The systematic review covers scientific research published between January 1995 and April 2016, drawn from the following databases: Web of Science, PubMed, PsycINFO, ERIC, Medline, and Google Scholar. Inclusion criteria were investigation of the effect of numeracy and/or graph literacy, and investigation of the effect of visual aids or comparison of their effect with that of numerical information. Thirty-six publications met the criteria, providing data on 27,885 diverse participants from 60 countries. Results Transparent visual aids robustly improved risk understanding in diverse individuals by encouraging thorough deliberation, enhancing cognitive self-assessment, and reducing conceptual biases in memory. Improvements in risk understanding consistently produced beneficial changes in attitudes, behavioral intentions, trust, and healthy behaviors. Visual aids were found to be particularly beneficial for vulnerable and less skilled individuals. Conclusion Well-designed visual aids tend to be highly effective tools for improving informed decision making among diverse decision makers. We identify five categories of practical, evidence-based guidelines for heuristic evaluation and design of effective visual aids.

Perception of risk of HIV/AIDS and sexual behaviour in Kenya.

PubMed

Akwara, Priscilla A; Madise, Nyovani Janet; Hinde, Andrew

2003-07-01

The association between perception of risk of HIV infection and sexual behaviour remains poorly understood, although perception of risk is considered to be the first stage towards behavioural change from risk-taking to safer behaviour. Using data from the 1998 Kenya Demographic and Health Survey, logistic regression models were fitted to examine the direction and the strength of the association between perceived risk of HIV/AIDS and risky sexual behaviour in the last 12 months before the survey. The findings indicate a strong positive association between perceived risk of HIV/AIDS and risky sexual behaviour for both women and men. Controlling for sociodemographic, sexual exposure and knowledge factors such as age, marital status, education, work status, residence, ethnicity, source of AIDS information, specific knowledge of AIDS, and condom use to avoid AIDS did not change the direction of the association, but altered its strength slightly. Young and unmarried women and men were more likely than older and married ones to report risky sexual behaviour. Ethnicity was significantly associated with risky sexual behaviour, suggesting a need to identify the contextual and social factors that influence behaviour among Kenyan people.

Prosthetically guided maxillofacial surgery: evaluation of the accuracy of a surgical guide and custom-made bone plate in oncology patients after mandibular reconstruction.

PubMed

Mazzoni, Simona; Marchetti, Claudio; Sgarzani, Rossella; Cipriani, Riccardo; Scotti, Roberto; Ciocca, Leonardo

2013-06-01

The aim of the present study was to evaluate the accuracy of prosthetically guided maxillofacial surgery in reconstructing the mandible with a free vascularized flap using custom-made bone plates and a surgical guide to cut the mandible and fibula. The surgical protocol was applied in a study group of seven consecutive mandibular-reconstructed patients who were compared with a control group treated using the standard preplating technique on stereolithographic models (indirect computer-aided design/computer-aided manufacturing method). The precision of both surgical techniques (prosthetically guided maxillofacial surgery and indirect computer-aided design/computer-aided manufacturing procedure) was evaluated by comparing preoperative and postoperative computed tomographic data and assessment of specific landmarks. With regard to midline deviation, no significant difference was documented between the test and control groups. With regard to mandibular angle shift, only one left angle shift on the lateral plane showed a statistically significant difference between the groups. With regard to angular deviation of the body axis, the data showed a significant difference in the arch deviation. All patients in the control group registered greater than 8 degrees of deviation, determining a facial contracture of the external profile at the lower margin of the mandible. With regard to condylar position, the postoperative condylar position was better in the test group than in the control group, although no significant difference was detected. The new protocol for mandibular reconstruction using computer-aided design/computer-aided manufacturing prosthetically guided maxillofacial surgery to construct custom-made guides and plates may represent a viable method of reproducing the patient's anatomical contour, giving the surgeon better procedural control and reducing procedure time. Therapeutic, III.

Computer-Aided Reliability Estimation

NASA Technical Reports Server (NTRS)

Bavuso, S. J.; Stiffler, J. J.; Bryant, L. A.; Petersen, P. L.

1986-01-01

CARE III (Computer-Aided Reliability Estimation, Third Generation) helps estimate reliability of complex, redundant, fault-tolerant systems. Program specifically designed for evaluation of fault-tolerant avionics systems. However, CARE III general enough for use in evaluation of other systems as well.

Salivary gland and nasopharyngeal cancers in individuals with acquired immunodeficiency syndrome in United States.

PubMed

Shebl, Fatma M; Bhatia, Kishor; Engels, Eric A

2010-05-15

Individuals with acquired immunodeficiency syndrome (AIDS) manifest an increased risk of cancer, particularly cancers caused by oncogenic viruses. Because some salivary gland and nasopharyngeal cancers are associated with Epstein Barr virus, the impact of AIDS on these cancers needs further evaluation. We used linked U.S. AIDS and cancer registry data (N = 519,934 people with AIDS) to derive standardized incidence ratios (SIRs) comparing risk of salivary gland and nasopharyngeal cancers to the general population. For salivary gland cancers (N = 43 cases), individuals with AIDS had strongly elevated risks for lymphoepithelial carcinoma (SIR 39, 95% CI 16-81) and squamous cell carcinoma (SIR 4.9, 95% CI 2.5-8.6). Among nasopharyngeal cancers (N = 39 cases), risks were elevated for both keratinizing and nonkeratinizing carcinomas (SIR 2.4, 95% CI 1.5-3.7 and SIR 2.4, 95% CI 1.2-4.4, respectively). The elevated risks of salivary gland and nasopharyngeal cancers among people with AIDS suggest that immunosuppression and oncogenic viral infections are etiologically important.

Effectiveness of educational technology to improve patient care in pharmacy curricula.

PubMed

Smith, Michael A; Benedict, Neal

2015-02-17

A review of the literature on the effectiveness of educational technologies to teach patient care skills to pharmacy students was conducted. Nineteen articles met inclusion criteria for the review. Seven of the articles included computer-aided instruction, 4 utilized human-patient simulation, 1 used both computer-aided instruction and human-patient simulation, and 7 utilized virtual patients. Educational technology was employed with more than 2700 students at 12 colleges and schools of pharmacy in courses including pharmacotherapeutics, skills and patient care laboratories, drug diversion, and advanced pharmacy practice experience (APPE) orientation. Students who learned by means of human-patient simulation and virtual patients reported enjoying the learning activity, whereas the results with computer-aided instruction were mixed. Moreover, the effect on learning was significant in the human-patient simulation and virtual patient studies, while conflicting data emerged on the effectiveness of computer-aided instruction.

Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature

PubMed Central

Baroudi, Kusai; Ibraheem, Shukran Nasser

2015-01-01

Background: This paper aimed to evaluate the application of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the factors that affect the survival of restorations. Materials and Methods: A thorough literature search using PubMed, Medline, Embase, Science Direct, Wiley Online Library and Grey literature were performed from the year 2004 up to June 2014. Only relevant research was considered. Results: The use of chair-side CAD/CAM systems is promising in all dental branches in terms of minimizing time and effort made by dentists, technicians and patients for restoring and maintaining patient oral function and aesthetic, while providing high quality outcome. Conclusion: The way of producing and placing the restorations made with the chair-side CAD/CAM (CEREC and E4D) devices is better than restorations made by conventional laboratory procedures. PMID:25954082

Computer-aided design/computer-aided manufacturing skull base drill.

PubMed

Couldwell, William T; MacDonald, Joel D; Thomas, Charles L; Hansen, Bradley C; Lapalikar, Aniruddha; Thakkar, Bharat; Balaji, Alagar K

2017-05-01

The authors have developed a simple device for computer-aided design/computer-aided manufacturing (CAD-CAM) that uses an image-guided system to define a cutting tool path that is shared with a surgical machining system for drilling bone. Information from 2D images (obtained via CT and MRI) is transmitted to a processor that produces a 3D image. The processor generates code defining an optimized cutting tool path, which is sent to a surgical machining system that can drill the desired portion of bone. This tool has applications for bone removal in both cranial and spine neurosurgical approaches. Such applications have the potential to reduce surgical time and associated complications such as infection or blood loss. The device enables rapid removal of bone within 1 mm of vital structures. The validity of such a machining tool is exemplified in the rapid (< 3 minutes machining time) and accurate removal of bone for transtemporal (for example, translabyrinthine) approaches.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

NASA Astrophysics Data System (ADS)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology.

PubMed

Mazaro, Josá Vitor Quinelli; de Mello, Caroline Cantieri; Zavanelli, Adriana Cristina; Santiago, Joel Ferreira; Amoroso, Andressa Paschoal; Pellizzer, Eduardo Piza

2014-07-01

This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

Computer-aided detection and quantification of endolymphatic hydrops within the mouse cochlea in vivo using optical coherence tomography

NASA Astrophysics Data System (ADS)

Liu, George S.; Kim, Jinkyung; Applegate, Brian E.; Oghalai, John S.

2017-07-01

Diseases that cause hearing loss and/or vertigo in humans such as Meniere's disease are often studied using animal models. The volume of endolymph within the inner ear varies with these diseases. Here, we used a mouse model of increased endolymph volume, endolymphatic hydrops, to develop a computer-aided objective approach to measure endolymph volume from images collected in vivo using optical coherence tomography. The displacement of Reissner's membrane from its normal position was measured in cochlear cross sections. We validated our computer-aided measurements with manual measurements and with trained observer labels. This approach allows for computer-aided detection of endolymphatic hydrops in mice, with test performance showing sensitivity of 91% and specificity of 87% using a running average of five measurements. These findings indicate that this approach is accurate and reliable for classifying endolymphatic hydrops and quantifying endolymph volume.

AIDS susceptibility in a migrant population: perception and behavior.

PubMed

McBride, D C; Weatherby, N L; Inciardi, J A; Gillespie, S A

1999-01-01

Within the framework of the Health Belief Model, this paper examines correlates of perception of AIDS susceptibility among 846 drug-using migrant farm workers and their sex partners. Significant but relatively small differences by ethnicity and gender were found. The data showed a consistent significant statistical relationship between frequency of drug use, high-risk sexual behavior, and perception of AIDS susceptibility. Perception of AIDS susceptibility was significantly related to a subsequent reduction in sexual risk behaviors. Consistent with the Health Belief Model, the data suggest that increasing perception of AIDS susceptibility may be an important motivator in reducing high-risk behaviors.

Computer Aided Dosimetry and Verification of Exposure to Radiation

DTIC Science & Technology

2002-06-01

Event matrix 2. Hematopoietic * Absolute blood counts * Relative blood counts 3. Dosimetry * TLD * EPDQuantitative * Radiation survey * Whole body...EI1 Defence Research and Recherche et developpement Development Canada pour la d6fense Canada DEFENCE •mI•DEFENSE Computer Aided Dosimetry and...Aided Dosimetry and Verification of Exposure to Radiation Edward Waller SAIC Canada Robert Z Stodilka Radiation Effects Group, Space Systems and

AIDS awareness and attitudes among Yemeni young people living in high-risk areas.

PubMed

Al-Serouri, A W; Anaam, M; Al-Iryani, B; Al Deram, A; Ramaroson, S

2010-03-01

Despite te low rate of infection in Yemen, there are concerns about the possible spread of HIV among high-risk and vulnerable groups. A community-based study was made in 2005 of AIDS awareness and attitudes among 601 young people aged 15-24 years from low-income, high-risk neighbourhoods in Aden. Young people lacked proper information about HIV/AIDS. Although 89% had heard of AIDS, fewer (46%) could name 3 ways of transmission or 3 ways to avoid infection (28%). Misconceptions about modes of transmissions were prevalent and many young people believed that they faced little or no risk. There were intolerant attitudes towards AIDS patients. About half the young people knew that prostitution and homosexuality existed in their area.

Increased risk of stomach and esophageal malignancies in people with AIDS.

PubMed

Persson, E Christina; Shiels, Meredith S; Dawsey, Sanford M; Bhatia, Kishor; Anderson, Lesley A; Engels, Eric A

2012-10-01

People infected with human immunodeficiency virus (HIV) have an increased risk of some malignancies, but little is known about the effects of infection on risk of cancers of the upper gastrointestinal tract. We evaluated the risks of different histologic and anatomic subtypes of carcinomas and non-Hodgkin lymphomas (NHLs) of the stomach and esophagus in people with acquired immunodeficiency syndrome (AIDS). We analyzed data from the HIV/AIDS Cancer Match Study, which links data collected from 1980 to 2007 for 16 US population-based HIV and AIDS and cancer registries. We compared risks of stomach and esophageal malignancies in people with AIDS (N = 596,955) with those of the general population using standardized incidence ratios (SIRs). We assessed calendar trends using Poisson regression. People with AIDS had increased risks of carcinomas of the esophagus (SIR, 1.69; 95% confidence interval [CI], 1.37-2.07; n = 95) and stomach (SIR, 1.44; 95% CI, 1.17-1.76; n = 96). Risk was increased for esophageal adenocarcinoma (SIR, 1.91; 95% CI, 1.31-2.70) and squamous cell carcinoma (SIR, 1.47; 95% CI, 1.10-1.92). People with AIDS had greater risks of carcinomas of the gastric cardia (SIR, 1.36; 95% CI, 0.83-2.11) and noncardia (SIR, 1.53; 95% CI, 1.12-2.05) than the general population. Although most stomach and esophageal NHLs that developed in people with AIDS were diffuse large B-cell lymphomas, these individuals also had an increased risk of stomach mucosa-associated lymphoid tissue lymphoma (SIR, 5.99; 95% CI, 3.19-10.2; n = 13). The incidence of carcinomas remained fairly constant over time, but rates of NHL decreased from 1980 to 2007 (P(trend) < .0001). People with AIDS are at increased risk for developing esophageal and stomach carcinomas and NHLs. Although the incidence of NHL decreased from 1980 to 2007 as treatments for HIV infection improved, HIV-infected individuals face continued risks of esophageal and stomach carcinomas. Copyright © 2012 AGA Institute. Published by Elsevier Inc. All rights reserved.

Increased Risk of Stomach and Esophageal Malignancies in People With AIDS

PubMed Central

Persson, E. Christina; Shiels, Meredith S.; Dawsey, Sanford M.; Bhatia, Kishor; Anderson, Lesley A.; Engels, Eric A.

2013-01-01

BACKGROUND & AIMS People infected with human immunodeficiency virus (HIV) have an increased risk of some malignancies, but little is known about the effects of infection on risk of cancers of the upper gastrointestinal tract. We evaluated the risks of different histologic and anatomic subtypes of carcinomas and non-Hodgkin lymphomas (NHLs) of the stomach and esophagus in people with acquired immunodeficiency syndrome (AIDS). METHODS We analyzed data from the HIV/AIDS Cancer Match Study, which links data collected from 1980 to 2007 for 16 US population-based HIV and AIDS and cancer registries. We compared risks of stomach and esophageal malignancies in people with AIDS (N = 596,955) with those of the general population using standardized incidence ratios (SIRs). We assessed calendar trends using Poisson regression. RESULTS People with AIDS had increased risks of carcinomas of the esophagus (SIR, 1.69; 95% confidence interval [CI], 1.37–2.07; n = 95) and stomach (SIR, 1.44; 95% CI, 1.17–1.76; n = 96). Risk was increased for esophageal adenocarcinoma (SIR, 1.91; 95% CI, 1.31–2.70) and squamous cell carcinoma (SIR, 1.47; 95% CI, 1.10 –1.92). People with AIDS had greater risks of carcinomas of the gastric cardia (SIR, 1.36; 95% CI, 0.83–2.11) and noncardia (SIR, 1.53; 95% CI, 1.12–2.05) than the general population. Although most stomach and esophageal NHLs that developed in people with AIDS were diffuse large B-cell lymphomas, these individuals also had an increased risk of stomach mucosa–associated lymphoid tissue lymphoma (SIR, 5.99; 95% CI, 3.19 –10.2; n = 13). The incidence of carcinomas remained fairly constant over time, but rates of NHL decreased from 1980 to 2007 (Ptrend < .0001). CONCLUSIONS People with AIDS are at increased risk for developing esophageal and stomach carcinomas and NHLs. Although the incidence of NHL decreased from 1980 to 2007 as treatments for HIV infection improved, HIV-infected individuals face continued risks of esophageal and stomach carcinomas. PMID:22796240

Hegemonic Masculinity, HIV/AIDS Risk Perception, and Sexual Behavior Change Among Young People in Ghana.

PubMed

Ganle, John Kuumuori

2016-05-01

Among the youth in some parts of sub-Saharan Africa, a paradoxical mix of adequate knowledge of HIV/AIDS and high-risk behavior characterizes their daily lives. Based on original qualitative research in Ghana, I explore in this article the ways in which the social construction of masculinity influences youth's responses to behavior change HIV/AIDS prevention interventions. Findings show that although awareness of the HIV/AIDS epidemic and the risks of infection is very high among the youth, a combination of hegemonic masculinity and perceptions of personal invulnerability acts to undermine the processes of young people's HIV/AIDS risk construction and appropriate behavioral change. I argue that if HIV/AIDS prevention is to be effective and sustained, school- and community-based initiatives should be developed to provide supportive social spaces in which the construction of masculinity, the identity of young men and women as gendered persons, and perceptions of their vulnerability to HIV/AIDS infection are challenged. © The Author(s) 2015.

AIDS-related and non-AIDS-related mortality in the Asia-Pacific region in the era of combination antiretroviral treatment.

PubMed

Falster, Kathleen; Choi, Jun Yong; Donovan, Basil; Duncombe, Chris; Mulhall, Brian; Sowden, David; Zhou, Jialun; Law, Matthew G

2009-11-13

Although studies have shown reductions in mortality from AIDS after the introduction of combination antiretroviral treatment (cART), little is known about cause-specific mortality in low-income settings in the cART era. We explored predictors of AIDS and non-AIDS mortality and compared cause-specific mortality across high-income and low-income settings in the Asia-Pacific region. We followed patients in the Asia Pacific HIV Observational Database from the date they started cART (or cohort enrolment if cART initiation was identified retrospectively), until the date of death or last follow-up visit. Competing risks methods were used to estimate the cumulative incidence, and to investigate predictors, of AIDS and non-AIDS mortality. Of 4252 patients, 215 died; 89 from AIDS, 97 from non-AIDS causes and 29 from unknown causes. Age more than 50 years [hazard ratio 4.29; 95% confidence interval (CI) 2.10-8.79] and CD4 cell counts less than or equal to 100 cells/microl (hazard ratio 8.59; 95% CI 5.66-13.03) were associated with an increased risk of non-AIDS mortality. Risk factors for AIDS mortality included CD4 cell counts less than or equal to 100 cells/microl (hazard ratio 34.97; 95% CI 18.01-67.90) and HIV RNA 10 001 or more (hazard ratio 4.21; 95% CI 2.07-8.55). There was some indication of a lower risk of non-AIDS mortality in Asian high-income, and possibly low-income, countries compared to Australia. Immune deficiency is associated with an increased risk of AIDS and non-AIDS mortality. Older age predicts non-AIDS mortality in the cART era. Less conclusive was the association between country-income level and cause-specific mortality because of the relatively high proportion of unknown causes of death in low-income settings.

Computers in medicine: liability issues for physicians.

PubMed

Hafner, A W; Filipowicz, A B; Whitely, W P

1989-07-01

Physicians routinely use computers to store, access, and retrieve medical information. As computer use becomes even more widespread in medicine, failure to utilize information systems may be seen as a violation of professional custom and lead to findings of professional liability. Even when a technology is not widespread, failure to incorporate it into medical practice may give rise to liability if the technology is accessible to the physician and reduces risk to the patient. Improvement in the availability of medical information sources imposes a greater burden on the physician to keep current and to obtain informed consent from patients. To routinely perform computer-assisted literature searches for informed consent and diagnosis is 'good medicine'. Clinical and diagnostic applications of computer technology now include computer-assisted decision making with the aid of sophisticated databases. Although such systems will expand the knowledge base and competence of physicians, malfunctioning software raises a major liability question. Also, complex computer-driven technology is used in direct patient care. Defective or improperly used hardware or software can lead to patient injury, thus raising additional complicated questions of professional liability and product liability.

Reductions in HIV risk-associated sexual behaviors among black male adolescents: effects of an AIDS prevention intervention.

PubMed Central

Jemmott, J B; Jemmott, L S; Fong, G T

1992-01-01

BACKGROUND. The number of reported cases of acquired immune deficiency syndrome (AIDS) is increasing disproportionately among Blacks in the United States. The relatively high incidence of sexually transmitted diseases among Black adolescents suggest the need for AIDS prevention programs to reduce their risk of sexually transmitted human immunodeficiency virus (HIV) infection. METHODS. Black male adolescents (n = 157) were randomly assigned to receive an AIDS risk reduction intervention aimed at increasing AIDS-related knowledge and weakening problematic attitudes toward risky sexual behavior, or to receive a control intervention on career opportunities. RESULTS. The adolescents who received the AIDS intervention subsequently had greater AIDS knowledge, less favorable attitudes toward risky sexual behavior, and lower intentions to engage in such behavior than did those in the control condition. Follow-up data collected 3 months later revealed that the adolescents who had received the AIDS intervention reported fewer occasions of coitus, fewer coital partners, greater use of condoms, and a lower incidence of heterosexual anal intercourse than did the other adolescents. CONCLUSIONS. These results suggest that interventions that increase knowledge about AIDS and change attitudes toward risky sexual behavior may have salutary effects on Black adolescents' risk of HIV infection. PMID:1536352

Computer Aided Drafting Packages for Secondary Education. Edition 2. PC DOS Compatible Programs. A MicroSIFT Quarterly Report.

ERIC Educational Resources Information Center

Pollard, Jim

This report reviews eight IBM-compatible software packages that are available to secondary schools to teach computer-aided drafting (CAD). Software packages to be considered were selected following reviews of CAD periodicals, computers in education periodicals, advertisements, and recommendations of teachers. The packages were then rated by…

Siren Songs and a Skeptic.

ERIC Educational Resources Information Center

O'Brien, George M.

This paper reports on an on-going experiment in computer-aided language instruction. In 1972, a class of beginning German students at the Duluth campus of the University of Minnesota volunteered to test two pedagogic theories: (1) Could a computer-aided course be used by a class and an instructor who knew nothing of computers and who had to rely…

PEO Integration Acronym Book

DTIC Science & Technology

2011-02-01

Command CASE Computer Aided Software Engineering CASEVAC Casualty Evacuation CASTFOREM Combined Arms And Support Task Force Evaluation Model CAT Center For...Advanced Technologies CAT Civil Affairs Team CAT Combined Arms Training CAT Crew Integration CAT Crisis Action Team CATIA Computer-Aided Three...Dimensional Interactive Application CATOX Catalytic Oxidation CATS Combined Arms Training Strategy CATT Combined Arms Tactical Trainer CATT Computer

Risk of melanoma in people with HIV/AIDS in the pre- and post-HAART eras: a systematic review and meta-analysis of cohort studies.

PubMed

Olsen, Catherine M; Knight, Lani L; Green, Adèle C

2014-01-01

Following the introduction of highly active antiretroviral therapy (HAART) the risk of AIDS-defining cancers decreased but incidence of many non-AIDS-defining cancers has reportedly increased in those with HIV/AIDS. Whether melanoma risk has also changed in HIV/AIDS patients post-HAART is unknown and therefore we evaluated this in comparison with the risk before HAART. Systematic review and meta-analysis. We searched Medline, Embase and ISI science citation index databases to April 2013. All cohort studies of patients diagnosed with HIV/AIDS that permitted quantitative assessment of the association with melanoma were eligible. Detailed quality assessment of eligible studies was conducted, focussing particularly on adjustment for ethnicity, a priori considered essential for an unbiased assessment of melanoma risk. Data were pooled using a random effects model. From 288 articles, we identified 21 that met the inclusion criteria, 13 presenting data for the post-HAART era and 8 for the pre-HAART era. Post-HAART the pooled relative risk (pRR) for the association between HIV/AIDS and melanoma was 1.26 (95% CI, 0.97-1.64) and 1.50 (95% CI 1.12-2.01) among studies that accounted for ethnicity, with evidence of significant heterogeneity (P = 0.004, I2 = 55.5). Pre-HAART pRRs were 1.26 (95% CI 1.11-1.43; P het = 0.82) and 1.28 (95% CI 1.10-1.49) among studies adjusted for ethnicity. People with HIV/AIDS remain at a significantly increased risk of developing melanoma in the post-HAART era. White skinned people with HIV/AIDS should be screened regularly and counselled against excessive sun exposure.

Risk of Melanoma in People with HIV/AIDS in the Pre- and Post-HAART Eras: A Systematic Review and Meta-Analysis of Cohort Studies

PubMed Central

Olsen, Catherine M.; Knight, Lani L.; Green, Adèle C.

2014-01-01

Objective Following the introduction of highly active antiretroviral therapy (HAART) the risk of AIDS-defining cancers decreased but incidence of many non-AIDS-defining cancers has reportedly increased in those with HIV/AIDS. Whether melanoma risk has also changed in HIV/AIDS patients post-HAART is unknown and therefore we evaluated this in comparison with the risk before HAART. Design Systematic review and meta-analysis. Methods We searched Medline, Embase and ISI science citation index databases to April 2013. All cohort studies of patients diagnosed with HIV/AIDS that permitted quantitative assessment of the association with melanoma were eligible. Detailed quality assessment of eligible studies was conducted, focussing particularly on adjustment for ethnicity, a priori considered essential for an unbiased assessment of melanoma risk. Data were pooled using a random effects model. Results From 288 articles, we identified 21 that met the inclusion criteria, 13 presenting data for the post-HAART era and 8 for the pre-HAART era. Post-HAART the pooled relative risk (pRR) for the association between HIV/AIDS and melanoma was 1.26 (95% CI, 0.97–1.64) and 1.50 (95% CI 1.12–2.01) among studies that accounted for ethnicity, with evidence of significant heterogeneity (P = 0.004, I2 = 55.5). Pre-HAART pRRs were 1.26 (95% CI 1.11–1.43; Phet = 0.82) and 1.28 (95% CI 1.10–1.49) among studies adjusted for ethnicity. Conclusions People with HIV/AIDS remain at a significantly increased risk of developing melanoma in the post-HAART era. White skinned people with HIV/AIDS should be screened regularly and counselled against excessive sun exposure. PMID:24740329

Miscellaneous Topics in Computer-Aided Drug Design: Synthetic Accessibility and GPU Computing, and Other Topics.

PubMed

Fukunishi, Yoshifumi; Mashimo, Tadaaki; Misoo, Kiyotaka; Wakabayashi, Yoshinori; Miyaki, Toshiaki; Ohta, Seiji; Nakamura, Mayu; Ikeda, Kazuyoshi

2016-01-01

Computer-aided drug design is still a state-of-the-art process in medicinal chemistry, and the main topics in this field have been extensively studied and well reviewed. These topics include compound databases, ligand-binding pocket prediction, protein-compound docking, virtual screening, target/off-target prediction, physical property prediction, molecular simulation and pharmacokinetics/pharmacodynamics (PK/PD) prediction. Message and Conclusion: However, there are also a number of secondary or miscellaneous topics that have been less well covered. For example, methods for synthesizing and predicting the synthetic accessibility (SA) of designed compounds are important in practical drug development, and hardware/software resources for performing the computations in computer-aided drug design are crucial. Cloud computing and general purpose graphics processing unit (GPGPU) computing have been used in virtual screening and molecular dynamics simulations. Not surprisingly, there is a growing demand for computer systems which combine these resources. In the present review, we summarize and discuss these various topics of drug design.

Miscellaneous Topics in Computer-Aided Drug Design: Synthetic Accessibility and GPU Computing, and Other Topics

PubMed Central

Fukunishi, Yoshifumi; Mashimo, Tadaaki; Misoo, Kiyotaka; Wakabayashi, Yoshinori; Miyaki, Toshiaki; Ohta, Seiji; Nakamura, Mayu; Ikeda, Kazuyoshi

2016-01-01

Abstract: Background Computer-aided drug design is still a state-of-the-art process in medicinal chemistry, and the main topics in this field have been extensively studied and well reviewed. These topics include compound databases, ligand-binding pocket prediction, protein-compound docking, virtual screening, target/off-target prediction, physical property prediction, molecular simulation and pharmacokinetics/pharmacodynamics (PK/PD) prediction. Message and Conclusion: However, there are also a number of secondary or miscellaneous topics that have been less well covered. For example, methods for synthesizing and predicting the synthetic accessibility (SA) of designed compounds are important in practical drug development, and hardware/software resources for performing the computations in computer-aided drug design are crucial. Cloud computing and general purpose graphics processing unit (GPGPU) computing have been used in virtual screening and molecular dynamics simulations. Not surprisingly, there is a growing demand for computer systems which combine these resources. In the present review, we summarize and discuss these various topics of drug design. PMID:27075578

Computer modelling as a tool for the exposure assessment of operators using faulty agricultural pesticide spraying equipment.

PubMed

Bańkowski, Robert; Wiadrowska, Bozena; Beresińska, Martyna; Ludwicki, Jan K; Noworyta-Głowacka, Justyna; Godyń, Artur; Doruchowski, Grzegorz; Hołownicki, Ryszard

2013-01-01

Faulty but still operating agricultural pesticide sprayers may pose an unacceptable health risk for operators. The computerized models designed to calculate exposure and risk for pesticide sprayers used as an aid in the evaluation and further authorisation of plant protection products may be applied also to assess a health risk for operators when faulty sprayers are used. To evaluate the impact of different exposure scenarios on the health risk for the operators using faulty agricultural spraying equipment by means of computer modelling. The exposure modelling was performed for 15 pesticides (5 insecticides, 7 fungicides and 3 herbicides). The critical parameter, i.e. toxicological end-point, on which the risk assessment was based was the no observable adverse effect level (NOAEL). This enabled risk to be estimated under various exposure conditions such as pesticide concentration in the plant protection product and type of the sprayed crop as well as the number of treatments. Computer modelling was based on the UK POEM model including determination of the acceptable operator exposure level (AOEL). Thus the degree of operator exposure could be defined during pesticide treatment whether or not personal protection equipment had been employed by individuals. Data used for computer modelling was obtained from simulated, pesticide substitute treatments using variously damaged knapsack sprayers. These substitute preparations consisted of markers that allowed computer simulations to be made, analogous to real-life exposure situations, in a dose dependent fashion. Exposures were estimated according to operator dosimetry exposure under 'field' conditions for low level, medium and high target field crops. The exposure modelling in the high target field crops demonstrated exceedance of the AOEL in all simulated treatment cases (100%) using damaged sprayers irrespective of the type of damage or if individual protective measures had been adopted or not. For low level and medium field crops exceedances ranged between 40 - 80% cases. The computer modelling may be considered as an practical tool for the hazard assessment when the faulty agricultural sprayers are used. It also may be applied for programming the quality checks and maintenance systems of this equipment.

Shaded-Color Picture Generation of Computer-Defined Arbitrary Shapes

NASA Technical Reports Server (NTRS)

Cozzolongo, J. V.; Hermstad, D. L.; Mccoy, D. S.; Clark, J.

1986-01-01

SHADE computer program generates realistic color-shaded pictures from computer-defined arbitrary shapes. Objects defined for computer representation displayed as smooth, color-shaded surfaces, including varying degrees of transparency. Results also used for presentation of computational results. By performing color mapping, SHADE colors model surface to display analysis results as pressures, stresses, and temperatures. NASA has used SHADE extensively in sign and analysis of high-performance aircraft. Industry should find applications for SHADE in computer-aided design and computer-aided manufacturing. SHADE written in VAX FORTRAN and MACRO Assembler for either interactive or batch execution.

Computer-aided assessment of hepatic contour abnormalities as an imaging biomarker for the prediction of hepatocellular carcinoma development in patients with chronic hepatitis C.

PubMed

Goshima, Satoshi; Kanematsu, Masayuki; Kondo, Hiroshi; Watanabe, Haruo; Noda, Yoshifumi; Fujita, Hiroshi; Bae, Kyongtae T

2015-05-01

To evaluate whether a hepatic fibrosis index (HFI), quantified on the basis of hepatic contour abnormality, is a risk factor for the development of hepatocellular carcinoma (HCC) in patients with chronic hepatitis C. Our institutional review board approved this retrospective study and written informed consent was waved. During a 14-month period, consecutive 98 patients with chronic hepatitis C who had no medical history of HCC treatment (56 men and 42 women; mean age, 70.7 years; range, 48-91 years) were included in this study. Gadoxetic acid-enhanced hepatocyte specific phase was used to detect and analyze hepatic contour abnormality. Hepatic contour abnormality was quantified and converted to HFI using in-house proto-type software. We compared HFI between patients with (n=54) and without HCC (n=44). Serum levels of albumin, total bilirubin, aspartate transferase, alanine transferase, percent prothrombin time, platelet count, alpha-fetoprotein, protein induced by vitamin K absence-II, and HFI were tested as possible risk factors for the development of HCC by determining the odds ratio with logistic regression analysis. HFIs were significantly higher in patients with HCC (0.58±0.86) than those without (0.36±0.11) (P<0.001). Logistic analysis revealed that only HFI was a significant risk factor for HCC development with an odds ratio (95% confidence interval) of 26.4 (9.0-77.8) using a cutoff value of 0.395. The hepatic fibrosis index, generated using a computer-aided assessment of hepatic contour abnormality, may be a useful imaging biomarker for the prediction of HCC development in patients with chronic hepatitis C. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Sexual Risk Behaviors, AIDS Knowledge, and Beliefs about AIDS among Runaways.

ERIC Educational Resources Information Center

Rotheram-Borus, Mary Jane; Koopman, Cheryl

1991-01-01

Examined young runaways' current risk behaviors, knowledge of AIDS, and beliefs about preventing AIDS by questioning 130 male and female subjects from shelters in New York City in 1988-89. Results did not explain the 6.7 percent seroprevalence rate reported in l988. Recommends closer inquiries regarding IV drug use and prostitution. (DM)

AIDS: Acquired Immune Deficiency Syndrome, Information and Procedural Guidelines for Providing Services to Persons with AIDS/HTLV-III.

ERIC Educational Resources Information Center

Montana State Dept. of Health and Environmental Sciences, Helena.

This manual presents information about the disease, Acquired Immune Deficiency Syndrome (AIDS), and guidelines for service delivery to Montana residents who have been diagnosed with AIDS or related disorders. The first section describes the disease's causes, symptoms, and transmission; risk factors; high-risk populations; prevention suggestions;…

Computer-aided dispatch--traffic management center field operational test final detailed test plan : WSDOT deployment

DOT National Transportation Integrated Search

2003-10-01

The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : WSDOT deployment". This document defines the objective, approach,...

Computer-aided dispatch--traffic management center field operational test : Washington State final report

DOT National Transportation Integrated Search

2006-05-01

This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch - Traffic Management Center Integration Field Operations Test in the State of Washington. The document discusses evaluation findings in the foll...

Denver RTD's computer aided dispatch/automatic vehicle location system : the human factors consequences

DOT National Transportation Integrated Search

1999-09-01

This report documents what happened to employees' work procedures when their employer when their employer installed Computer Aided Disptach/Automatic Vehicle Locator (CAD/AVL) technology to provide real-time surveillance of vehicles and to upgrade ra...

The University of Michigan's Computer-Aided Engineering Network.

ERIC Educational Resources Information Center

Atkins, D. E.; Olsen, Leslie A.

1986-01-01

Presents an overview of the Computer-Aided Engineering Network (CAEN) of the University of Michigan. Describes its arrangement of workstations, communication networks, and servers. Outlines the factors considered in hardware and software decision making. Reviews the program's impact on students. (ML)

Computer-aided engineering of semiconductor integrated circuits

NASA Astrophysics Data System (ADS)

Meindl, J. D.; Dutton, R. W.; Gibbons, J. F.; Helms, C. R.; Plummer, J. D.; Tiller, W. A.; Ho, C. P.; Saraswat, K. C.; Deal, B. E.; Kamins, T. I.

1980-07-01

Economical procurement of small quantities of high performance custom integrated circuits for military systems is impeded by inadequate process, device and circuit models that handicap low cost computer aided design. The principal objective of this program is to formulate physical models of fabrication processes, devices and circuits to allow total computer-aided design of custom large-scale integrated circuits. The basic areas under investigation are (1) thermal oxidation, (2) ion implantation and diffusion, (3) chemical vapor deposition of silicon and refractory metal silicides, (4) device simulation and analytic measurements. This report discusses the fourth year of the program.

CAD system for footwear design based on whole real 3D data of last surface

NASA Astrophysics Data System (ADS)

Song, Wanzhong; Su, Xianyu

2000-10-01

Two major parts of application of CAD in footwear design are studied: the development of last surface; computer-aided design of planar shoe-template. A new quasi-experiential development algorithm of last surface based on triangulation approximation is presented. This development algorithm consumes less time and does not need any interactive operation for precisely development compared with other development algorithm of last surface. Based on this algorithm, a software, SHOEMAKERTM, which contains computer aided automatic measurement, automatic development of last surface and computer aide design of shoe-template has been developed.

Training Aids for Online Instruction: An Analysis.

ERIC Educational Resources Information Center

Guy, Robin Frederick

This paper describes a number of different types of training aids currently employed in online training: non-interactive audiovisual presentations; interactive computer-based aids; partially interactive aids based on recorded searches; print-based materials; and kits. The advantages and disadvantages of each type of aid are noted, and a table…

Financial Aid for Full-Time Undergraduates. Higher Education Panel Report Number 60.

ERIC Educational Resources Information Center

Andersen, Charles J.

The level and composition of student financial aid for undergraduate students were estimated, with attention to estimated number of aid recipients, the total amount they received, the distribution of aided students by their families' income level, the composition of their aid packages, and the use of computers in the administration of aid. In…

Creating an advance-care-planning decision aid for high-risk surgery: a qualitative study

PubMed Central

2014-01-01

Background High-risk surgery patients may lose decision-making capacity as a result of surgical complications. Advance care planning prior to surgery may be beneficial, but remains controversial and is hindered by a lack of appropriate decision aids. This study sought to examine stakeholders’ views on the appropriateness of using decision aids, in general, to support advance care planning among high-risk surgery populations and the design of such a decision aid. Methods Key informants were recruited through purposive and snowball sampling. Semi-structured interviews were conducted by phone until data collected reached theoretical saturation. Key informants were asked to discuss their thoughts about advance care planning and interventions to support advance care planning, particularly for this population. Researchers took de-identified notes that were analyzed for emerging concordant, discordant, and recurrent themes using interpretative phenomenological analysis. Results Key informants described the importance of initiating advance care planning preoperatively, despite potential challenges present in surgical settings. In general, decision aids were viewed as an appropriate approach to support advance care planning for this population. A recipe emerged from the data that outlines tools, ingredients, and tips for success that are needed to design an advance care planning decision aid for high-risk surgical settings. Conclusions Stakeholders supported incorporating advance care planning in high-risk surgical settings and endorsed the appropriateness of using decision aids to do so. Findings will inform the next stages of developing the first advance care planning decision aid for high-risk surgery patients. PMID:25067908

Creating an advance-care-planning decision aid for high-risk surgery: a qualitative study.

PubMed

Schuster, Anne Lr; Aslakson, Rebecca A; Bridges, John Fp

2014-01-01

High-risk surgery patients may lose decision-making capacity as a result of surgical complications. Advance care planning prior to surgery may be beneficial, but remains controversial and is hindered by a lack of appropriate decision aids. This study sought to examine stakeholders' views on the appropriateness of using decision aids, in general, to support advance care planning among high-risk surgery populations and the design of such a decision aid. Key informants were recruited through purposive and snowball sampling. Semi-structured interviews were conducted by phone until data collected reached theoretical saturation. Key informants were asked to discuss their thoughts about advance care planning and interventions to support advance care planning, particularly for this population. Researchers took de-identified notes that were analyzed for emerging concordant, discordant, and recurrent themes using interpretative phenomenological analysis. Key informants described the importance of initiating advance care planning preoperatively, despite potential challenges present in surgical settings. In general, decision aids were viewed as an appropriate approach to support advance care planning for this population. A recipe emerged from the data that outlines tools, ingredients, and tips for success that are needed to design an advance care planning decision aid for high-risk surgical settings. Stakeholders supported incorporating advance care planning in high-risk surgical settings and endorsed the appropriateness of using decision aids to do so. Findings will inform the next stages of developing the first advance care planning decision aid for high-risk surgery patients.

Usability Studies in Virtual and Traditional Computer Aided Design Environments for Fault Identification

DTIC Science & Technology

2017-08-08

Usability Studies In Virtual And Traditional Computer Aided Design Environments For Fault Identification Dr. Syed Adeel Ahmed, Xavier University...virtual environment with wand interfaces compared directly with a workstation non-stereoscopic traditional CAD interface with keyboard and mouse. In...the differences in interaction when compared with traditional human computer interfaces. This paper provides analysis via usability study methods

A State-of-the-Art Review of the Real-Time Computer-Aided Study of the Writing Process

ERIC Educational Resources Information Center

Abdel Latif, Muhammad M.

2008-01-01

Writing researchers have developed various methods for investigating the writing process since the 1970s. The early 1980s saw the occurrence of the real-time computer-aided study of the writing process that relies on the protocols generated by recording the computer screen activities as writers compose using the word processor. This article…

Computer-Aided Transcription in the Courts. Executive Summary. National Center Publication No. R-0058.

ERIC Educational Resources Information Center

National Center for State Courts, Williamsburg, VA.

This report summarizes the findings of the Computer-Aided Transcription (CAT) Project, which conducted a 14-month study of the technology and use of computer systems for translating into English the shorthand notes taken by court reporters on stenotype machines. Included are the state of the art of CAT at the end of 1980 and anticipated future…

Wusor II: A Computer Aided Instruction Program with Student Modelling Capabilities. AI Memo 417.

ERIC Educational Resources Information Center

Carr, Brian

Wusor II is the second intelligent computer aided instruction (ICAI) program that has been developed to monitor the progress of, and offer suggestions to, students playing Wumpus, a computer game designed to teach logical thinking and problem solving. From the earlier efforts with Wusor I, it was possible to produce a rule-based expert which…

Computational System For Rapid CFD Analysis In Engineering

NASA Technical Reports Server (NTRS)

Barson, Steven L.; Ascoli, Edward P.; Decroix, Michelle E.; Sindir, Munir M.

1995-01-01

Computational system comprising modular hardware and software sub-systems developed to accelerate and facilitate use of techniques of computational fluid dynamics (CFD) in engineering environment. Addresses integration of all aspects of CFD analysis process, including definition of hardware surfaces, generation of computational grids, CFD flow solution, and postprocessing. Incorporates interfaces for integration of all hardware and software tools needed to perform complete CFD analysis. Includes tools for efficient definition of flow geometry, generation of computational grids, computation of flows on grids, and postprocessing of flow data. System accepts geometric input from any of three basic sources: computer-aided design (CAD), computer-aided engineering (CAE), or definition by user.

Unit cell-based computer-aided manufacturing system for tissue engineering.

PubMed

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-03-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

HIV/AIDS and Infertility: Emerging Problems in the Era of Highly Active Antiretrovirals

PubMed Central

Kushnir, Vitaly A.; Lewis, William

2011-01-01

Objective To review the effects of HIV/AIDS, associated co-morbid conditions, and side effects of antiretroviral treatment on fertility. Design A Pubmed computer search was performed to identify relevant articles. Setting Research institution. Intervention(s) None. Result(s) Biological alterations in reproductive physiology may account for sub-fertility in patients infected with HIV. Psychosocial factors in patients with HIV infection may affect reproductive desires and outcomes. Antiretroviral medications may have direct toxicity on gametes and embryos. Available evidence indicates that fertility treatments can be a safe option for HIV-discordant couples; although, potential risk of viral transmission cannot be completely eliminated. Conclusion(s) Reproductive desires are increasingly becoming prominent in the healthcare of young HIV-infected patients. Additional data is needed to address the effect of HIV and its treatments on fertility and reproductive outcomes. PMID:21722892

Estimation of risk of cancers before occurrence of acquired immunodeficiency syndrome in persons infected with human immunodeficiency virus.

PubMed

Li, Yueming; Law, Matthew; McDonald, Ann; Correll, Patty; Kaldor, John M; Grulich, Andrew E

2002-01-15

There is methodological debate as to whether cohorts defined by acquired immunodeficiency syndrome (AIDS) diagnosis can be used to estimate risks of cancer in persons with human immunodeficiency virus (HIV) before AIDS. The authors compared risks of non-AIDS-defining cancers before AIDS in persons with HIV using a cohort based on AIDS diagnosis and a second cohort based on HIV diagnosis. National population-based registries of AIDS and HIV diagnoses to August 1999 were matched separately with the National Cancer Registry in Australia. Four analyses were performed. In analysis 1, follow-up was from 5 years before AIDS registration in 8,118 persons with AIDS. Analysis 2 was similar but adjusted expected numbers of cancers for decreased survival. Analysis 3 was based on 7,061 persons registered with HIV, with follow-up from the reported date of diagnosis. Analysis 4 was based on 2,112 AIDS cases previously reported with HIV, with follow-up from 5 years before AIDS diagnosis. In all analyses, follow-up ended at cancer diagnosis, death, 6 months before AIDS, or the end of available cancer data, whichever occurred first. For 10 types of cancer there were at least three cases in any one of the analyses. For these cancers there was no systematic pattern such that one analysis produced consistently higher or lower estimates than the others. These analyses suggest that cancer risk in persons with HIV before AIDS diagnosis may be estimated reliably based on cancer experience 5 years before AIDS.

Computer-aided dispatch--traffic management center field operational test : state of Utah final report

DOT National Transportation Integrated Search

2006-07-01

This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch Traffic Management Center Integration Field Operations Test in the State of Utah. The document discusses evaluation findings in the followin...

USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOL IN POLLUTION PREVENTION

EPA Science Inventory

Computer-Aided Process Engineering has become established in industry as a design tool. With the establishment of the CAPE-OPEN software specifications for process simulation environments. CAPE-OPEN provides a set of "middleware" standards that enable software developers to acces...

Using CAD Programs in CAL.

ERIC Educational Resources Information Center

Boardman, D.

1979-01-01

Practical experience has shown that computer aided design programs can provide an invaluable aid in the learning process when integrated into the syllabus in lecture and laboratory periods. This should be a major area of future development of computer assisted learning in engineering education. (Author/CMV)

Computer-aided dispatch--traffic management center field operational test final test plans : state of Utah

DOT National Transportation Integrated Search

2004-01-01

The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : state of Utah". This document defines the objective, approach, an...

Computer-Aided Geometry Modeling

NASA Technical Reports Server (NTRS)

Shoosmith, J. N. (Compiler); Fulton, R. E. (Compiler)

1984-01-01

Techniques in computer-aided geometry modeling and their application are addressed. Mathematical modeling, solid geometry models, management of geometric data, development of geometry standards, and interactive and graphic procedures are discussed. The applications include aeronautical and aerospace structures design, fluid flow modeling, and gas turbine design.

APPLICATION OF COMPUTER AIDED TOMOGRAPHY (CAT) TO THE STUDY OF MARINE BENTIC COMMUNITIES

EPA Science Inventory

Sediment cores were imaged using a Computer-Aided Tomography (CT) scanner at Massachusetts General Hospital, Boston, Massachusetts, United States. Procedures were developed, using the attenuation of X-rays, to differentiate between sediment and the water contained in macrobenthic...

Effectiveness of nonresuscitative first aid training in laypersons: a systematic review.

PubMed

Van de Velde, Stijn; Heselmans, Annemie; Roex, Ann; Vandekerckhove, Philippe; Ramaekers, Dirk; Aertgeerts, Bert

2009-09-01

This study reviewed evidence on the effects of nonresuscitative first aid training on competence and helping behavior in laypersons. We identified randomized and nonrandomized controlled trials and interrupted time series on nonresuscitative first aid training for laypersons by using 12 databases (including MEDLINE, EMBASE, and PsycINFO), hand searching, reference checking, and author communication. Two reviewers independently evaluated selected studies with the Cochrane Effective Practice and Organisation of Care Review Group quality criteria. One reviewer extracted data with a standard form and another checked them. In anticipation of substantial heterogeneity across studies, we elected a descriptive summary of the included studies. We included 4 studies, 3 of which were randomized trials. We excluded 11 studies on quality issues. Two studies revealed that participants trained in first aid demonstrated higher written test scores than controls (poisoning first aid: relative risk 2.11, 95% confidence interval [CI] 1.64 to 2.72; various first aid cases: mean difference 4.75, 95% CI 3.02 to 6.48). Two studies evaluated helping responses during unannounced simulations. First aid training improved the quality of help for a bleeding emergency (relative risk 25.94; 95% CI 3.60 to 186.93), not the rate of helping (relative risk 1.13; 95% CI 0.88 to 1.45). Training in first aid and helping behavior increased the helping rates in a chest pain emergency compared with training in first aid only (relative risk 2.80; 95% CI 1.05 to 7.50) or controls (relative risk 3.81; 95% CI 0.98 to 14.89). Participants trained in first aid only did not help more than controls (relative risk 1.36; 95% CI 0.28 to 6.61). First aid programs that also train participants to overcome inhibitors of emergency helping behavior could lead to better help and higher helping rates.

Salivary Gland and Nasopharyngeal Cancers in Individuals with Acquired Immunodeficiency Syndrome in United States

PubMed Central

Shebl, Fatma M.; Bhatia, Kishor; Engels, Eric A.

2009-01-01

Individuals with acquired immunodeficiency syndrome (AIDS) manifest an increased risk of cancer, particularly cancers caused by oncogenic viruses. Because some salivary gland and nasopharyngeal cancers are associated with Epstein Barr virus, the impact of AIDS on these cancers needs further evaluation. We used linked U.S. AIDS and cancer registry data (N=519,934 people with AIDS) to derive standardized incidence ratios (SIRs) comparing risk of salivary gland and nasopharyngeal cancers to the general population. For salivary gland cancers (N=43 cases), individuals with AIDS had strongly elevated risks for lymphoepithelial carcinoma (SIR 39, 95% CI 16-81) and squamous cell carcinoma (SIR 4.9, 95% CI 2.5-8.6). Among nasopharyngeal cancers (N=39 cases), risks were elevated for both keratinizing and non-keratinizing carcinomas (SIR 2.4, 95% CI 1.5-3.7, and SIR 2.4, 95% CI 1.2-4.4, respectively). The elevated risks of salivary gland and nasopharyngeal cancers among people with AIDS suggest that immunosuppression and oncogenic viral infections are etiologically important. PMID:19810095

Developing a method to derive alcohol-attributable fractions for HIV/AIDS mortality based on alcohol's impact on adherence to antiretroviral medication

PubMed Central

2011-01-01

Background Alcohol consumption is causally linked to nonadherence to antiretroviral treatment that in turn causes an increase in HIV/AIDS mortality. This article presents a method to calculate the percentage of HIV/AIDS deaths attributable to alcohol consumption and the associated uncertainty. Methods By combining information on risk relations from a number of published sources, we estimated alcohol-attributable fractions (AAFs) of HIV/AIDS in a stepwise procedure. First, we estimated the effect of alcohol consumption on adherence to antiretroviral treatment, and then we combined this estimate with the impact of nonadherence on death. The 95% uncertainty intervals were computed by estimating the variance of the AAFs using Taylor series expansions of one and multiple variables. AAFs were determined for each of the five Global Burden of Disease regions of Africa, based on country-specific treatment and alcohol consumption data from 2005. Results The effects of alcohol on HIV/AIDS in the African Global Burden of Disease regions range from 0.03% to 0.34% for men and from 0% to 0.17% for women, depending on region and age category. The detrimental effect of alcohol consumption was statistically significant in every region and age category except for the North Africa/Middle East region. Conclusions Although the method has its limitations, it was shown to be feasible and provided estimates of the impact of alcohol use on the mortality outcome of HIV/AIDS. PMID:21320310

Impact of Educational and Patient Decision Aids on Decisional Conflict Associated with Total Knee Arthroplasty

PubMed Central

de Achaval, Sofia; Fraenkel, Liana; Volk, Robert J.; Cox, Vanessa; Suarez-Almazor, Maria E.

2012-01-01

Our objective was to examine the impact of a videobooklet patient decision aid supplemented by an interactive values clarification exercise on decisional conflict in patients with knee osteoarthritis (OA) considering total knee arthroplasy. 208 patients participated in the study (mean age 63 years; 68% female; 66% White). Participants were randomized to 1 of 3 groups: (1) Educational booklet on OA management (control); (2) Patient decision aid (videobooklet) on OA management; and (3) Patient decision aid (videobooklet) + adaptive conjoint analysis ACA tool. The ACA tool enables patients to consider competing attributes (i.e. specific risks/benefits) by asking them to rate a series of paired-comparisons. The primary outcome was the decisional conflict scale ranging from 0 to 100. Differences between groups were analyzed using analysis of variance (ANOVA) and Tukey's honestly significant difference tests. Overall, decisional conflict decreased significantly in all groups (p<0.05). The largest reduction in decisional conflict was observed for participants in the videobooklet decision aid group (21 points). Statistically significant differences in pre vs. post-intervention total scores favored the videobooklet group compared to the control group (21 vs. 10) and to the videobooklet plus ACA group (21 vs. 14; p<0.001). Changes in the decisional conflict score for the control compared to the videobooklet decision aid + ACA group were not significantly different. In our study, an audiovisual patient decision aid decreased decisional conflict more than printed material alone, or than the addition of a more complex computer-based ACA tool requiring more intense cognitive involvement and explicit value choices. PMID:21954198

Estimation of the Standardized Risk Difference and Ratio in a Competing Risks Framework: Application to Injection Drug Use and Progression to AIDS After Initiation of Antiretroviral Therapy

PubMed Central

Cole, Stephen R.; Lau, Bryan; Eron, Joseph J.; Brookhart, M. Alan; Kitahata, Mari M.; Martin, Jeffrey N.; Mathews, William C.; Mugavero, Michael J.; Cole, Stephen R.; Brookhart, M. Alan; Lau, Bryan; Eron, Joseph J.; Kitahata, Mari M.; Martin, Jeffrey N.; Mathews, William C.; Mugavero, Michael J.

2015-01-01

There are few published examples of absolute risk estimated from epidemiologic data subject to censoring and competing risks with adjustment for multiple confounders. We present an example estimating the effect of injection drug use on 6-year risk of acquired immunodeficiency syndrome (AIDS) after initiation of combination antiretroviral therapy between 1998 and 2012 in an 8-site US cohort study with death before AIDS as a competing risk. We estimate the risk standardized to the total study sample by combining inverse probability weights with the cumulative incidence function; estimates of precision are obtained by bootstrap. In 7,182 patients (83% male, 33% African American, median age of 38 years), we observed 6-year standardized AIDS risks of 16.75% among 1,143 injection drug users and 12.08% among 6,039 nonusers, yielding a standardized risk difference of 4.68 (95% confidence interval: 1.27, 8.08) and a standardized risk ratio of 1.39 (95% confidence interval: 1.12, 1.72). Results may be sensitive to the assumptions of exposure-version irrelevance, no measurement bias, and no unmeasured confounding. These limitations suggest that results be replicated with refined measurements of injection drug use. Nevertheless, estimating the standardized risk difference and ratio is straightforward, and injection drug use appears to increase the risk of AIDS. PMID:24966220

A tutorial on the use of ROC analysis for computer-aided diagnostic systems.

PubMed

Scheipers, Ulrich; Perrey, Christian; Siebers, Stefan; Hansen, Christian; Ermert, Helmut

2005-07-01

The application of the receiver operating characteristic (ROC) curve for computer-aided diagnostic systems is reviewed. A statistical framework is presented and different methods of evaluating the classification performance of computer-aided diagnostic systems, and, in particular, systems for ultrasonic tissue characterization, are derived. Most classifiers that are used today are dependent on a separation threshold, which can be chosen freely in many cases. The separation threshold separates the range of output values of the classification system into different target groups, thus conducting the actual classification process. In the first part of this paper, threshold specific performance measures, e.g., sensitivity and specificity, are presented. In the second part, a threshold-independent performance measure, the area under the ROC curve, is reviewed. Only the use of separation threshold-independent performance measures provides classification results that are overall representative for computer-aided diagnostic systems. The following text was motivated by the lack of a complete and definite discussion of the underlying subject in available textbooks, references and publications. Most manuscripts published so far address the theme of performance evaluation using ROC analysis in a manner too general to be practical for everyday use in the development of computer-aided diagnostic systems. Nowadays, the user of computer-aided diagnostic systems typically handles huge amounts of numerical data, not always distributed normally. Many assumptions made in more or less theoretical works on ROC analysis are no longer valid for real-life data. The paper aims at closing the gap between theoretical works and real-life data. The review provides the interested scientist with information needed to conduct ROC analysis and to integrate algorithms performing ROC analysis into classification systems while understanding the basic principles of classification.

Risk factors for HIV-AIDS among youth in Cape Town, South Africa.

PubMed

Simbayi, Leickness C; Kalichman, Seth C; Jooste, Sean; Cherry, Charsey; Mfecane, Sakhumzi; Cain, Demetria

2005-03-01

South Africa is in the midst of a devastating HIV-AIDS epidemic and most new HIV infections occur among young adults and adolescents. The current study examined risk behaviors and HIV risk factors among young people living in a Black South African township. Using community-based outreach methods of street intercept and facility-based surveying, 113 men and 115 women age 25 and younger responded to an anonymous survey. Results showed that men (68%) and women (56%) reported HIV-related high risk sexual behaviors. Although knowledge about HIV transmission was generally high, there was evidence that misconceptions about AIDS persist, particularly myths related to HIV transmission. For young men, HIV risk factors were associated with fewer years of education, lower levels of AIDS-related knowledge, condom attitudes, and Dagga (marijuana) use. Among young women, HIV risk factors were associated with beliefs that condoms get in the way of sex and rates of unprotected vaginal intercourse. Despite adequate general AIDS knowledge and risk sensitization, South African youth demonstrated high rates of sexual practices that place them at risk for HIV infection. There is an urgent need for behavioral interventions targeted to young South Africans living in the most economically disadvantaged areas.

The Risk of Hepatocellular Carcinoma Among Individuals With Acquired Immunodeficiency Syndrome in the United States

PubMed Central

Sahasrabuddhe, Vikrant V.; Shiels, Meredith S.; McGlynn, Katherine A.; Engels, Eric A.

2014-01-01

BACKGROUND Hepatocellular carcinoma (HCC) is a concern among individuals with human immunodeficiency virus (HIV) infection and acquired immunodeficiency syndrome (AIDS). METHODS The authors analyzed population-based registry linkage data from the US HIV/AIDS Cancer Match Study (1980–2009) to examine the risk and trends of HCC among individuals with AIDS. Standardized incidence ratios (SIRs) were used to measure HCC risk relative to the general population, and Poisson regression was used to calculate incidence rate ratios (RR) comparing incidence among individuals with AIDS. People with AIDS were categorized according to their HIV risk group into high and low hepatitis C virus (HCV) prevalence groups based on their HIV transmission risk category. RESULTS Among 615,150 individuals with AIDS, HCC risk was elevated almost 4 times compared with the risk in the general population (N = 366; SIR, 3.8; 95% confidence interval, 3.5–4.3). Although HCC incidence increased steadily across calendar periods (Ptrend < .0001; adjusted for sex and age), the excess risk in individuals with AIDS compared with the general population remained somewhat constant (SIRs range, 3.5–3.9) between the monotherapy/dual therapy era (1990–1995) and the recent highly active antiretroviral therapy era (2001–2009). In a multivariate model adjusting for sex, race/ethnicity, and attained calendar period, HCC incidence increased with advancing age (Ptrend < .0001) and was associated with HIV risk groups with a known higher prevalence of HCV (adjusted RR, 2.2; 95% confidence interval, 1.8–2.8). CONCLUSIONS HCC incidence in individuals with AIDS has increased over time despite improved HIV treatment regimens, likely reflecting prolonged survival with chronic liver disease. The high incidence in older adults suggests that this cancer will increase in importance with aging of the HIV-infected population. PMID:22736272

Effect of T4 count and cofactors on the incidence of AIDS in homosexual men infected with human immunodeficiency virus.

PubMed

Goedert, J J; Biggar, R J; Melbye, M; Mann, D L; Wilson, S; Gail, M H; Grossman, R J; DiGioia, R A; Sanchez, W C; Weiss, S H

1987-01-16

We prospectively evaluated potential markers and cofactors for the acquired immunodeficiency syndrome (AIDS) in 86 homosexual men who were seropositive for human immunodeficiency virus antibodies. During three years of follow-up, 19 men developed AIDS. Risk of AIDS was clearly predicted by the total number of circulating OKT4-positive lymphocytes (T4 count) at enrollment, while the corresponding T8 count was unrelated to subsequent AIDS development. Subjects in Manhattan had a higher risk of Kaposi's sarcoma than did subjects in Washington, DC, and the risk of AIDS tended to increase with numerous homosexual partners. Several of 40 potential cofactors defined ex post facto, including receptive fellatio, enemas, methaqualone use, and high levels of antibody to hepatitis B surface antigen, appeared to be associated with Kaposi's sarcoma but not with Pneumocystis pneumonia. Our data suggest that potent cofactors for Pneumocystis pneumonia were not prominent, pointing to the need for effective drug therapies, particularly to reduce the high AIDS risk of persons with human immunodeficiency virus infection and low T4 counts.

Promoting African American women and sexual assertiveness in reducing HIV/AIDS: an analytical review of the research literature.

PubMed

Kennedy, Bernice Roberts; Jenkins, Chalice C

2011-01-01

African American women, including adolescents and adults, are disproportionately affected by the transmission of Human Immunodeficiency Virus (HIV) and Acquired Immunodeficiency Syndrome (AIDS). HIV/AID is a health disparity issue for African American females in comparison to other ethnic groups. According to data acquired from 33 states in 2005, 64% of women who have HIV/ AIDS are African American women. It is estimated that during 2001-2004, 61% of African Americans under the age of 25 had been living with HIV/AIDS. This article is an analytical review of the literature emphasizing sexual assertiveness of African American women and the gap that exists in research literature on this population. The multifaceted model of HIV risk posits that an interpersonal predictor of risky sexual behavior is sexual assertiveness. The critical themes extracted from a review of the literature reveal the following: (a) sexual assertiveness is related to HIV risk in women, (b) sexual assertiveness and sexual communication are related, and (c) women with low sexual assertiveness are at increased risk of HIV As a result of this comprehensive literature, future research studies need to use models in validating sexual assertiveness interventions in reducing the risk of HIV/AIDS in African American women. HIV/AIDs prevention interventions or future studies need to target reducing the risk factors of HIV/AIDS of African Americans focusing on gender and culture-specific strategies.

How Adverse Outcome Pathways Can Aid the Development and Use of Computational Prediction Models for Regulatory Toxicology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wittwehr, Clemens; Aladjov, Hristo; Ankley, Gerald

Efforts are underway to transform regulatory toxicology and chemical safety assessment from a largely empirical science based on direct observation of apical toxicity outcomes in whole organism toxicity tests to a predictive one in which outcomes and risk are inferred from accumulated mechanistic understanding. The adverse outcome pathway (AOP) framework has emerged as a systematic approach for organizing knowledge that supports such inference. We argue that this systematic organization of knowledge can inform and help direct the design and development of computational prediction models that can further enhance the utility of mechanistic and in silico data for chemical safety assessment.more » Examples of AOP-informed model development and its application to the assessment of chemicals for skin sensitization and multiple modes of endocrine disruption are provided. The role of problem formulation, not only as a critical phase of risk assessment, but also as guide for both AOP and complementary model development described. Finally, a proposal for actively engaging the modeling community in AOP-informed computational model development is made. The contents serve as a vision for how AOPs can be leveraged to facilitate development of computational prediction models needed to support the next generation of chemical safety assessment.« less

Some Workplace Effects of CAD and CAM.

ERIC Educational Resources Information Center

Ebel, Karl-H.; Ulrich, Erhard

1987-01-01

Examines the impact of computer-aided design (CAD) and computer-aided manufacturing (CAM) on employment, work organization, working conditions, job content, training, and industrial relations in several countries. Finds little evidence of negative employment effects since productivity gains are offset by various compensatory factors. (Author/CH)

Society for College Science Teachers: High Technology.

ERIC Educational Resources Information Center

Menefee, Robert

1983-01-01

Presents findings of a study group on high technology charged with determining a definition, assessing current educational response, and examining implications for the future. Topics addressed include: super-techs; computer-aided design/computer-aided manufacture (CAD/CAM); structural unemployment; a two-plus-two curriculum; and educational…

The Power of Computer-aided Tomography to Investigate Marine Benthic Communities

EPA Science Inventory

Utilization of Computer-aided-Tomography (CT) technology is a powerful tool to investigate benthic communities in aquatic systems. In this presentation, we will attempt to summarize our 15 years of experience in developing specific CT methods and applications to marine benthic co...

A comparison of detection efficiency on an air traffic control monitoring task with and without computer aiding.

DOT National Transportation Integrated Search

1989-01-01

Future levels of air traffic control automation plan to incorporate computer aiding features designed to alert the controller to upcoming problem situations by displaying information that will identify the situation and suggest possible solutions. Co...

A Simple and Resource-efficient Setup for the Computer-aided Drug Design Laboratory.

PubMed

Moretti, Loris; Sartori, Luca

2016-10-01

Undertaking modelling investigations for Computer-Aided Drug Design (CADD) requires a proper environment. In principle, this could be done on a single computer, but the reality of a drug discovery program requires robustness and high-throughput computing (HTC) to efficiently support the research. Therefore, a more capable alternative is needed but its implementation has no widespread solution. Here, the realization of such a computing facility is discussed, from general layout to technical details all aspects are covered. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Microwave processing of a dental ceramic used in computer-aided design/computer-aided manufacturing.

PubMed

Pendola, Martin; Saha, Subrata

2015-01-01

Because of their favorable mechanical properties and natural esthetics, ceramics are widely used in restorative dentistry. The conventional ceramic sintering process required for their use is usually slow, however, and the equipment has an elevated energy consumption. Sintering processes that use microwaves have several advantages compared to regular sintering: shorter processing times, lower energy consumption, and the capacity for volumetric heating. The objective of this study was to test the mechanical properties of a dental ceramic used in computer-aided design/computer-aided manufacturing (CAD/CAM) after the specimens were processed with microwave hybrid sintering. Density, hardness, and bending strength were measured. When ceramic specimens were sintered with microwaves, the processing times were reduced and protocols were simplified. Hardness was improved almost 20% compared to regular sintering, and flexural strength measurements suggested that specimens were approximately 50% stronger than specimens sintered in a conventional system. Microwave hybrid sintering may preserve or improve the mechanical properties of dental ceramics designed for CAD/CAM processing systems, reducing processing and waiting times.

The effects of computer-aided design software on engineering students' spatial visualisation skills

NASA Astrophysics Data System (ADS)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

[Computer aided design for fixed partial denture framework based on reverse engineering technology].

PubMed

Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

2006-03-01

To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

Adhesive Bonding to Computer-aided Design/ Computer-aided Manufacturing Esthetic Dental Materials: An Overview.

PubMed

Awad, Mohamed Moustafa; Alqahtani, H; Al-Mudahi, A; Murayshed, M S; Alrahlah, A; Bhandi, Shilpa H

2017-07-01

To review the adhesive bonding to different computer-aided design/computer-aided manufacturing (CAD/CAM) esthetic restorative materials. The use of CAD/CAM esthetic restorative materials has gained popularity in recent years. Several CAD/ CAM esthetic restorative materials are commercially available. Adhesive bonding is a major determinant of success of CAD/ CAM restorations. Review result: An account of the currently available bonding strategies are discussed with their rationale in various CAD/ CAM materials. Different surface treatment methods as well as adhesion promoters can be used to achieve reliable bonding of CAD/CAM restorative materials. Selection of bonding strategy to such material is determined based on its composition. Further evidence is required to evaluate the effect of new surface treatment methods, such as nonthermal atmospheric plasma and self-etching ceramic primer on bonding to different dental ceramics. An understanding of the currently available bonding strategies to CA/CAM materials can help the clinician to select the most indicated system for each category of materials.

Utilizing computerized entertainment education in the development of decision aids for lower literate and naïve computer users.

PubMed

Jibaja-Weiss, Maria L; Volk, Robert J

2007-01-01

Decision aids have been developed by using various delivery methods, including interactive computer programs. Such programs, however, still rely heavily on written information, health and digital literacy, and reading ease. We describe an approach to overcome these potential barriers for low-literate, underserved populations by making design considerations for poor readers and naïve computer users and by using concepts from entertainment education to engage the user and to contextualize the content for the user. The system design goals are to make the program both didactic and entertaining and the navigation and graphical user interface as simple as possible. One entertainment education strategy, the soap opera, is linked seamlessly to interactive learning modules to enhance the content of the soap opera episodes. The edutainment decision aid model (EDAM) guides developers through the design process. Although designing patient decision aids that are educational, entertaining, and targeted toward poor readers and those with limited computer skills is a complex task, it is a promising strategy for aiding this population. Entertainment education may be a highly effective approach to promoting informed decision making for patients with low health literacy.

COMPUTER-AIDED DRAFTING AND DESIGN, A THREE-WEEK SUMMER INSTITUTE TRAINING PROGRAM (MIAMI-DADE JUNIOR COLLEGE, MIAMI, FLORIDA, JULY 10, 1967 - JULY 28, 1967). FINAL REPORT.

ERIC Educational Resources Information Center

MORPHONIOS, ALEX G.

THIRTY-SIX INSTRUCTORS, SUPERVISORS, AND DEPARTMENT CHAIRMEN IN AREAS OF DRAFTING, ENGINEERING, MANUFACTURING, AND COMPUTER TECHNOLOGY AT JUNIOR COLLEGES, TECHNICAL, AND AREA VOCATIONAL SCHOOLS IN 20 STATES ATTENDED A 3-WEEK SUMMER INSTITUTE TRAINING PROGRAM ON COMPUTER-AIDED DRAFTING AND DESIGN. EXPERIENCE IN PROGRAMING THE IBM SYSTEM 1620 WITH…

A Study of the Use of Ontologies for Building Computer-Aided Control Engineering Self-Learning Educational Software

ERIC Educational Resources Information Center

García, Isaías; Benavides, Carmen; Alaiz, Héctor; Alonso, Angel

2013-01-01

This paper describes research on the use of knowledge models (ontologies) for building computer-aided educational software in the field of control engineering. Ontologies are able to represent in the computer a very rich conceptual model of a given domain. This model can be used later for a number of purposes in different software applications. In…

Spatial and temporal analysis of Aids cases in Brazil, 1996-2011: increased risk areas over time.

PubMed

Sousa, Artur Iuri Alves de; Pinto, Vitor Laerte

2016-01-01

to identify areas with greater risk of AIDS transmission in Brazil. this is an ecological study involving georeference of AIDS cases incidence, prevalence and density in Brazilian municipalities using the Kernel method for the periods 1996-1999, 2000-2003, 2004-2007 and 2008-2011. 633,512 AIDS cases were reported between 1996-2011; between 2008-2011, there was increased risk of AIDS transmission in Recife-João Pessoa region, the emergence of areas with average density in the regions of Belém, São Luís, Maceió, Aracaju and Salvador, and a decline in the intensity of risk in São Paulo, Campinas and Ribeirão Preto; prevalence rates were most concentrated in the Southeast, South and Midwest regions of the country. overall, AIDS incidence in Brazil showed successive increases in the periods analyzed; case prevalence indicates spatial clusters, with high concentrations in the Southeast, South and Midwest regions.

Modeling and Analysis of Power Processing Systems (MAPPS). Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Lee, F. C.; Rahman, S.; Carter, R. A.; Wu, C. H.; Yu, Y.; Chang, R.

1980-01-01

Computer aided design and analysis techniques were applied to power processing equipment. Topics covered include: (1) discrete time domain analysis of switching regulators for performance analysis; (2) design optimization of power converters using augmented Lagrangian penalty function technique; (3) investigation of current-injected multiloop controlled switching regulators; and (4) application of optimization for Navy VSTOL energy power system. The generation of the mathematical models and the development and application of computer aided design techniques to solve the different mathematical models are discussed. Recommendations are made for future work that would enhance the application of the computer aided design techniques for power processing systems.

Creation of Anatomically Accurate Computer-Aided Design (CAD) Solid Models from Medical Images

NASA Technical Reports Server (NTRS)

Stewart, John E.; Graham, R. Scott; Samareh, Jamshid A.; Oberlander, Eric J.; Broaddus, William C.

1999-01-01

Most surgical instrumentation and implants used in the world today are designed with sophisticated Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) software. This software automates the mechanical development of a product from its conceptual design through manufacturing. CAD software also provides a means of manipulating solid models prior to Finite Element Modeling (FEM). Few surgical products are designed in conjunction with accurate CAD models of human anatomy because of the difficulty with which these models are created. We have developed a novel technique that creates anatomically accurate, patient specific CAD solids from medical images in a matter of minutes.

Competing Risks or Different Pathways? An Event History Analysis of the Relationship between Financial Aid and Educational Outcomes for Latinos

ERIC Educational Resources Information Center

Gross, Jacob P. K.; Torres, Vasti

2010-01-01

Using a competing risks event history model this study explores the effects of differentiated forms of financial aid on the postsecondary enrollment patterns of Latino college students in Indiana. Much of the prior research on financial aid has employed cross-sectional methods, which assume that the effects of aid do not vary across time. This…

Positive parenting for positive parents: HIV/AIDS, poverty, caregiver depression, child behavior, and parenting in South Africa.

PubMed

Lachman, Jamie M; Cluver, Lucie D; Boyes, Mark E; Kuo, Caroline; Casale, Marisa

2014-01-01

Families affected by HIV/AIDS in the developing world experience higher risks of psychosocial problems than nonaffected families. Positive parenting behavior may buffer against the negative impact of child AIDS-orphanhood and caregiver AIDS-sickness on child well-being. Although there is substantial literature regarding the predictors of parenting behavior in Western populations, there is insufficient evidence on HIV/AIDS as a risk factor for poor parenting in low- and middle-income countries. This paper examines the relationship between HIV/AIDS and positive parenting by comparing HIV/AIDS-affected and nonaffected caregiver-child dyads (n=2477) from a cross-sectional survey in KwaZulu-Natal, South Africa (27.7% AIDS-ill caregivers; 7.4% child AIDS-orphanhood). Multiple mediation analyses tested an ecological model with poverty, caregiver depression, perceived social support, and child behavior problems as potential mediators of the association of HIV/AIDS with positive parenting. Results indicate that familial HIV/AIDS's association to reduced positive parenting was consistent with mediation by poverty, caregiver depression, and child behavior problems. Parenting interventions that situate positive parenting within a wider ecological framework by improving child behavior problems and caregiver depression may buffer against risks for poor child mental and physical health outcomes in families affected by HIV/AIDS and poverty.

Computer-aided light sheet flow visualization using photogrammetry

NASA Technical Reports Server (NTRS)

Stacy, Kathryn; Severance, Kurt; Childers, Brooks A.

1994-01-01

A computer-aided flow visualization process has been developed to analyze video images acquired from rotating and translating light sheet visualization systems. The computer process integrates a mathematical model for image reconstruction, advanced computer graphics concepts, and digital image processing to provide a quantitative and a visual analysis capability. The image reconstruction model, based on photogrammetry, uses knowledge of the camera and light sheet locations and orientations to project two-dimensional light sheet video images into three-dimensional space. A sophisticated computer visualization package, commonly used to analyze computational fluid dynamics (CFD) results, was chosen to interactively display the reconstructed light sheet images with the numerical surface geometry for the model or aircraft under study. The photogrammetric reconstruction technique and the image processing and computer graphics techniques and equipment are described. Results of the computer-aided process applied to both a wind tunnel translating light sheet experiment and an in-flight rotating light sheet experiment are presented. The capability to compare reconstructed experimental light sheet images with CFD solutions in the same graphics environment is also demonstrated.

Computer-Aided Light Sheet Flow Visualization

NASA Technical Reports Server (NTRS)

Stacy, Kathryn; Severance, Kurt; Childers, Brooks A.

1993-01-01

A computer-aided flow visualization process has been developed to analyze video images acquired from rotating and translating light sheet visualization systems. The computer process integrates a mathematical model for image reconstruction, advanced computer graphics concepts, and digital image processing to provide a quantitative and visual analysis capability. The image reconstruction model, based on photogrammetry, uses knowledge of the camera and light sheet locations and orientations to project two-dimensional light sheet video images into three-dimensional space. A sophisticated computer visualization package, commonly used to analyze computational fluid dynamics (CFD) data sets, was chosen to interactively display the reconstructed light sheet images, along with the numerical surface geometry for the model or aircraft under study. A description is provided of the photogrammetric reconstruction technique, and the image processing and computer graphics techniques and equipment. Results of the computer aided process applied to both a wind tunnel translating light sheet experiment and an in-flight rotating light sheet experiment are presented. The capability to compare reconstructed experimental light sheet images and CFD solutions in the same graphics environment is also demonstrated.

Computer-aided light sheet flow visualization

NASA Technical Reports Server (NTRS)

Stacy, Kathryn; Severance, Kurt; Childers, Brooks A.

1993-01-01

A computer-aided flow visualization process has been developed to analyze video images acquired from rotating and translating light sheet visualization systems. The computer process integrates a mathematical model for image reconstruction, advanced computer graphics concepts, and digital image processing to provide a quantitative and visual analysis capability. The image reconstruction model, based on photogrammetry, uses knowledge of the camera and light sheet locations and orientations to project two-dimensional light sheet video images into three-dimensional space. A sophisticated computer visualization package, commonly used to analyze computational fluid dynamics (CFD) data sets, was chosen to interactively display the reconstructed light sheet images, along with the numerical surface geometry for the model or aircraft under study. A description is provided of the photogrammetric reconstruction technique, and the image processing and computer graphics techniques and equipment. Results of the computer aided process applied to both a wind tunnel translating light sheet experiment and an in-flight rotating light sheet experiment are presented. The capability to compare reconstructed experimental light sheet images and CFD solutions in the same graphics environment is also demonstrated.

[Assessment of the risk factors for urolithiasis in cosmonauts during long flights

NASA Technical Reports Server (NTRS)

Arzamazov, G. S.; Witson, P. A.; Larina, O. N.; Pastushkova, L. Kh; Pak, C. T.; Whitson, P. A. (Principal Investigator)

1996-01-01

Twelve cosmonauts flown aboard the Mir orbital station for 6-12 months and twelve candidates for cosmonauts were examined in an effort to determine a degree of urolithiasis risk. Prior to flight, on flight day 310 (in one cosmonaut) and after flight, the daily urinary excretion of the components influencing lithiasis formation was determined as well as a computer-aided calculation of urine saturation by lithogenic salts was performed (Ch. Pak, USA). In the in- and postflight periods, the greater number of indices under study were negatively changed in cosmonauts. Excretion dynamics of the lithogenesis inhibitors, i.e., citrates and magnesium, is of polar directionality. Frequency of deviations from the normal indices of urolithic risk in cosmonauts is primarily conditioned by low diuresis, urine supersaturation with calcium oxalate, undissociated uric acid, brushit, hypercalciuria, and changed pH.

What lies behind gender inequalities in HIV/AIDS in sub-Saharan African countries: evidence from Kenya, Lesotho and Tanzania

PubMed Central

Sia, Drissa; Onadja, Yentéma; Nandi, Arijit; Foro, Anne; Brewer, Timothy

2014-01-01

Within sub-Saharan Africa, women are disproportionately at risk for acquiring and having human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS). It is important to clarify whether gender inequalities in HIV prevalence in this region are explained by differences in the distributions of HIV risk factors, differences in the effects of these risk factors or some combination of both. We used an extension of the Blinder–Oaxaca decomposition approach to explain gender inequalities in HIV/AIDS in Kenya, Lesotho and Tanzania using data from the demographic and health and AIDS indicator surveys. After adjusting for covariates using Poisson regression models, female gender was associated with a higher prevalence of HIV/AIDS in Kenya [prevalence ratio (PR) = 1.73, 95% confidence interval (CI) = 1.33, 2.23 in 2003] and Lesotho (PR = 1.39, 95% CI = 1.20, 1.62 in 2004/05), but not in Tanzania. Decomposition analyses demonstrated two distinct patterns over time. In Tanzania, the gender inequality in HIV/AIDS was explained by differences in the distributions of HIV risk factors between men and women. In contrast, in Kenya and Lesotho, this inequality was partly explained by differences in the effects across men and women of measured HIV/AIDS risk factors, including socio-demographic characteristics (age and marital status) and sexual behaviours (age at first sex); these results imply that gender inequalities in HIV/AIDS would persist in Kenya and Lesotho even if men and women had similar distributions of HIV risk factors. The production of gender inequalities may vary across countries, with inequalities attributable to the unequal distribution of risk factors among men and women in some countries and the differential effect of these factors between groups in others. These different patterns have important implications for policies to reduce gender inequalities in HIV/AIDS. PMID:24345343

Application of expert systems in project management decision aiding

NASA Technical Reports Server (NTRS)

Harris, Regina; Shaffer, Steven; Stokes, James; Goldstein, David

1987-01-01

The feasibility of developing an expert systems-based project management decision aid to enhance the performance of NASA project managers was assessed. The research effort included extensive literature reviews in the areas of project management, project management decision aiding, expert systems technology, and human-computer interface engineering. Literature reviews were augmented by focused interviews with NASA managers. Time estimation for project scheduling was identified as the target activity for decision augmentation, and a design was developed for an Integrated NASA System for Intelligent Time Estimation (INSITE). The proposed INSITE design was judged feasible with a low level of risk. A partial proof-of-concept experiment was performed and was successful. Specific conclusions drawn from the research and analyses are included. The INSITE concept is potentially applicable in any management sphere, commercial or government, where time estimation is required for project scheduling. As project scheduling is a nearly universal management activity, the range of possibilities is considerable. The INSITE concept also holds potential for enhancing other management tasks, especially in areas such as cost estimation, where estimation-by-analogy is already a proven method.

Connecting the virtual world of computers to the real world of medicinal chemistry.

PubMed

Glen, Robert C

2011-03-01

Drug discovery involves the simultaneous optimization of chemical and biological properties, usually in a single small molecule, which modulates one of nature's most complex systems: the balance between human health and disease. The increased use of computer-aided methods is having a significant impact on all aspects of the drug-discovery and development process and with improved methods and ever faster computers, computer-aided molecular design will be ever more central to the discovery process.

CAD/CAM complete dentures: a review of two commercial fabrication systems.

PubMed

Kattadiyil, Mathew T; Goodacre, Charles J; Baba, Nadim Z

2013-06-01

The use of computer-aided design and computer-aided manufacturing (CAD/CAM) has become available for complete dentures through the AvaDent and Dentca systems. AvaDent uses laser scanning and computer technology. Teeth are arranged and bases formed using proprietary software.The bases are milled from prepolymerized pucks of resin. Dentca uses computer software to produce virtual maxillary and mandibular edentulous ridges, arrange the teeth and form bases. The dentures are fabricated using a conventional processing technique.

Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

NASA Technical Reports Server (NTRS)

Thorp, Scott A.

1992-01-01

This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

Computer-Aided Communication Satellite System Analysis and Optimization.

ERIC Educational Resources Information Center

Stagl, Thomas W.; And Others

Various published computer programs for fixed/broadcast communication satellite system synthesis and optimization are discussed. The rationale for selecting General Dynamics/Convair's Satellite Telecommunication Analysis and Modeling Program (STAMP) in modified form to aid in the system costing and sensitivity analysis work in the Program on…

Challenges facing developers of CAD/CAM models that seek to predict human working postures

NASA Astrophysics Data System (ADS)

Wiker, Steven F.

2005-11-01

This paper outlines the need for development of human posture prediction models for Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) design applications in product, facility and work design. Challenges facing developers of posture prediction algorithms are presented and discussed.

A Prototype of CAD/CAM Education in the Community College.

ERIC Educational Resources Information Center

Kimmey, James R.

Drawing upon Elgin Community College's (ECC's) 7-year history of program development and operation, this paper demonstrates how ECC, in cooperation with Northern Illinois Industries, Computervision Corporation, Mazak Corporation, and the Society of Manufacturing Engineers, established a Computer-Aided Design and Drafting/Computer-Aided Machining…

A Structure for Creating Quality Software.

ERIC Educational Resources Information Center

Christensen, Larry C.; Bodey, Michael R.

1990-01-01

Addresses the issue of assuring quality software for use in computer-aided instruction and presents a structure by which developers can create quality courseware. Differences between courseware and computer-aided instruction software are discussed, methods for testing software are described, and human factors issues as well as instructional design…

SMART USE OF COMPUTER-AIDED SPERM ANALYSIS (CASA) TO CHARACTERIZE SPERM MOTION

EPA Science Inventory

Computer-aided sperm analysis (CASA) has evolved over the past fifteen years to provide an objective, practical means of measuring and characterizing the velocity and parttern of sperm motion. CASA instruments use video frame-grabber boards to capture multiple images of spermato...

Calendar Instruments in Retrospective Web Surveys

ERIC Educational Resources Information Center

Glasner, Tina; van der Vaart, Wander; Dijkstra, Wil

2015-01-01

Calendar instruments incorporate aided recall techniques such as temporal landmarks and visual time lines that aim to reduce response error in retrospective surveys. Those calendar instruments have been used extensively in off-line research (e.g., computer-aided telephone interviews, computer assisted personal interviewing, and paper and pen…

DEVELOPMENT AND USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOLS FOR POLLUTION PREVENTION

EPA Science Inventory

The use of Computer-Aided Process Engineering (CAPE) and process simulation tools has become established industry practice to predict simulation software, new opportunities are available for the creation of a wide range of ancillary tools that can be used from within multiple sim...

Risk Assessment of Alzheimer's Disease using the Information Diffusion Model from Structural Magnetic Resonance Imaging.

PubMed

Beheshti, Iman; Olya, Hossain G T; Demirel, Hasan

2016-04-05

Recently, automatic risk assessment methods have been a target for the detection of Alzheimer's disease (AD) risk. This study aims to develop an automatic computer-aided AD diagnosis technique for risk assessment of AD using information diffusion theory. Information diffusion is a fuzzy mathematics logic of set-value that is used for risk assessment of natural phenomena, which attaches fuzziness (uncertainty) and incompleteness. Data were obtained from voxel-based morphometry analysis of structural magnetic resonance imaging. The information diffusion model results revealed that the risk of AD increases with a reduction of the normalized gray matter ratio (p > 0.5, normalized gray matter ratio <40%). The information diffusion model results were evaluated by calculation of the correlation of two traditional risk assessments of AD, the Mini-Mental State Examination and the Clinical Dementia Rating. The correlation results revealed that the information diffusion model findings were in line with Mini-Mental State Examination and Clinical Dementia Rating results. Application of information diffusion model contributes to the computerization of risk assessment of AD, which has a practical implication for the early detection of AD.

AIDS and behavioral change to reduce risk: a review.

PubMed Central

Becker, M H; Joseph, J G

1988-01-01

Published reports describing behavioral changes in response to the threat of AIDS (acquired immunodeficiency syndrome) are reviewed. These studies demonstrate rapid, profound, but expectably incomplete alterations in the behavior of both homosexual/bisexual males and intravenous drug users. This is true in the highest risk metropolitan areas such as New York City and in areas with lower AIDS incidence. Risk reduction is occurring more frequently through the modification of sexual or drug-use behavior than through its elimination. In contrast to aggregate data, longitudinal descriptions of individual behavior demonstrate considerable instability or recidivism. Behavioral change in the potentially vulnerable heterosexual adolescent and young adult populations is less common, as is risk reduction among urban minorities. Reports of AIDS-related knowledge and attitudes generally parallel the pattern of behavioral changes. Nonetheless, few studies investigate the relationship of knowledge and attitudes to risk reduction. Future studies should provide much-needed information about the determinants as well as the magnitude of behavioral changes required to reduce the further spread of AIDS. PMID:3279837

University students' knowledge of, and attitudes towards, HIV and AIDS, homosexuality and sexual risk behaviour: a questionnaire survey in two Finnish universities.

PubMed

Korhonen, Teija; Kylmä, Jari; Houtsonen, Jarmo; Välimäki, Maritta; Suominen, Tarja

2012-11-01

This study describes Finnish university students' knowledge and attitudes towards HIV and AIDS, homosexuality and sexual risk behaviour. Finnish-speaking students were randomly selected from all registered students at two universities in Finland (N = 9715, n = 950). The data were collected by using a modified version of the State University of New York at Buffalo School of Nursing AIDS Study Questionnaire on sexual risk behaviour developed by Held and Chng. The total response rate was 35% (n = 333). The data were analysed using quantitative statistical methods. Normally distributed data were analysed by t-test and one-way ANOVA, with Bonferroni corrections. Non-normally distributed data were analysed using the Mann-Whitney U-test and Kruskal-Wallis test, followed by a post-hoc test. The majority of students were familiar with HIV and AIDS, including its mode of transmission. However, there were still some misconceptions concerning HIV and AIDS. The oldest students and women had a more positive attitude towards people living with HIV and AIDS (PLWHA). Of patients with HIV or AIDS, intravenous drug users were perceived most negatively. Male students had more homophobic attitudes. Students who reported that religion had an important role in their lives had significantly stricter attitudes towards sexual risk behaviour. Students' knowledge correlated positively with general attitudes towards HIV and AIDS. Knowledge about HIV and AIDS will lead to more positive attitudes towards HIV and AIDS as a disease, towards those infected as well as homosexual people. There is a need to focus on preventive health care and sexual health promotion by educating young people and changing their attitudes towards sexual risk behaviour.

Evaluation of a School-Based Train-the-Trainer Intervention Program to Teach First Aid and Risk Reduction among High School Students

ERIC Educational Resources Information Center

Carruth, Ann K.; Pryor, Susan; Cormier, Cathy; Bateman, Aaron; Matzke, Brenda; Gilmore, Karen

2010-01-01

Background: Farming is a hazardous occupation posing health risks from agricultural exposures for the farm owner and family members. First Aid for Rural Medical Emergencies (F.A.R.M.E.) was developed to support a train-the-trainer (TTT) program to prepare high school students to teach first aid skills and risk reduction through peer interaction.…

The NASA computer aided design and test system

NASA Technical Reports Server (NTRS)

Gould, J. M.; Juergensen, K.

1973-01-01

A family of computer programs facilitating the design, layout, evaluation, and testing of digital electronic circuitry is described. CADAT (computer aided design and test system) is intended for use by NASA and its contractors and is aimed predominantly at providing cost effective microelectronic subsystems based on custom designed metal oxide semiconductor (MOS) large scale integrated circuits (LSIC's). CADAT software can be easily adopted by installations with a wide variety of computer hardware configurations. Its structure permits ease of update to more powerful component programs and to newly emerging LSIC technologies. The components of the CADAT system are described stressing the interaction of programs rather than detail of coding or algorithms. The CADAT system provides computer aids to derive and document the design intent, includes powerful automatic layout software, permits detailed geometry checks and performance simulation based on mask data, and furnishes test pattern sequences for hardware testing.

Effect of HIV/AIDS on the control environment.

PubMed

Coetzee, Philna

2006-07-01

The management of organizations is responsible for risk management and control systems. HIV/AIDS could be a great threat in the achievement of strategic business objectives, implicating a great concern for management. Management needs to understand this possible risk. This study aims to identify the effect that HIV/AIDS could have on the different elements of the control environment. The archival research method was used. It was established that no formal research was conducted to date on the effect of HIV/AIDS on the control environment as a whole. Various studies have included the effect of HIV/AIDS on certain factors of the control environment. These studies will be discussed briefly to identify relevant findings. The study indicated that the disease could affect various aspects of the control environment, namely: competency of the workforce (e.g. productivity, quality of work, absenteeism, loss of skills and knowledge, training and recruitment, etc.); organizational structure (e.g. increase use of technology labour, disruption of processes, level of employees affected by the disease); human resource (HR) policies and practices (e.g. legislation applicable, prevention and awareness programmes, compensation and benefits). Research limitation: HIV/AIDS is a relatively new potential risk to organizations. Knowledge of the disease is limited. HIV/AIDS is also a very sensitive issue as people fear the disease and do not like to discuss its existence. Government determined that it should be a non-notifiable disease and the disease is currently greatly stigmatized. The databases of companies investigated by other research studies were not developed to gather all the relevant information. Management should be aware that HIV/AIDS poses a possible risk to organizations. Data on the effect of HIV/AIDS should be gathered and used in the decision-making process on how to manage this risk. To be able to fulfil this duty, management first has to determine: whether HIV/AIDS is a risk; the relevant cost involved that the disease is costing the organization; how to control these costs.

Examining the effectiveness of home-based parent aide services to reduce risk for physical child abuse and neglect: six-month findings from a randomized clinical trial.

PubMed

Guterman, Neil B; Tabone, Jiyoung K; Bryan, George M; Taylor, Catherine A; Napoleon-Hanger, Cynthia; Banman, Aaron

2013-08-01

This study set out to carry out a feasible, real-world, randomized clinical trial to examine the benefits of home-based paraprofessional parent aide services in reducing physical abuse and neglect risk in high-risk parents. Families were randomly assigned to receive either parent aide plus case management services (n = 73) or case management services only (n = 65), collecting in-home data on physical child abuse and neglect and proximal risk and protective factors, just prior to service initiation, and again after six months of services. Mothers receiving parent aide and case management services reported significant improvements from baseline to six-month follow-up in self-reported indicators of physical child abuse risk, as well as improvements on parental stress, mastery, depression, and anxiety, whereas mothers receiving only case management services did not. The slopes of such observed changes across groups, however, were not found to be statistically significantly different. No discernable improvements were found with regard to indicators of risk for child neglect. As the first randomized clinical trial examining the effectiveness of parent aide services, this study provides the first controlled evidence examining the potential benefits of this service modality. This study suggests promising trends regarding the benefit of parent aide services with respect to physical child abuse risk reduction and related predictors, but evidence does not appear to suggest that such services, as they are presently delivered, reduce child neglect. These findings support the continued use of parent aide services in cases of physical child abuse and also suggest careful consideration of the ways such services may be better configured to extend their impact, particularly with respect to child neglect risk. Copyright © 2013 Elsevier Ltd. All rights reserved.

Herbst appliance in lingual orthodontics.

PubMed

Wiechmann, Dirk; Schwestka-Polly, Rainer; Hohoff, Ariane

2008-09-01

The aims of this article were to outline a technique for attaching Herbst telescopes to a customized lingual orthodontic (LO) appliance and to demonstrate the treatment phases and outcome with a case report. The interface between the LO appliance and the telescopes consists of a computer-aided design/computer-aided manufacturing (CAD/CAM), custom-made labial pivot base connected to the custom-made bands of the maxillary molars and mandibular canines. The individual CAD depiction of the interface ensures an optimal 3-dimensional tube-and-plunger position for correct and smooth function of the telescope mechanism. Because of the lingual location of the brackets, a small buccal tooth-to-telescope distance can be achieved, increasing patient comfort. Various options of anchorage are possible with only 1 device. After bite jumping, the telescopes and pivot bases can be removed easily without debonding the bands or removing the archwires. Experience from the first patient suggests that the Herbst-LO appliance facilitates treatment control during all phases, decreases the risk of interface breakage and mandibular incisor flaring, and might reduce overall treatment time. These initial clinical observations justify further research to provide evidence about the efficacy of Herbst-LO appliances.

Research on computer aided testing of pilot response to critical in-flight events

NASA Technical Reports Server (NTRS)

Giffin, W. C.; Rockwell, T. H.; Smith, P. J.

1984-01-01

Experiments on pilot decision making are described. The development of models of pilot decision making in critical in flight events (CIFE) are emphasized. The following tests are reported on the development of: (1) a frame system representation describing how pilots use their knowledge in a fault diagnosis task; (2) assessment of script norms, distance measures, and Markov models developed from computer aided testing (CAT) data; and (3) performance ranking of subject data. It is demonstrated that interactive computer aided testing either by touch CRT's or personal computers is a useful research and training device for measuring pilot information management in diagnosing system failures in simulated flight situations. Performance is dictated by knowledge of aircraft sybsystems, initial pilot structuring of the failure symptoms and efficient testing of plausible causal hypotheses.

Development and Verification of Body Armor Target Geometry Created Using Computed Tomography Scans

DTIC Science & Technology

2017-07-13

designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an official endorsement or approval of...modeling consisted of manual measurement of armor systems and translating those measurements to computer-aided design geometry, which can be tedious and...computer-aided design (CAD) human geometry model (referred to throughout as ORCA man) that is used in the Operational Requirement-based Casualty Assessment

Making Ceramic/Polymer Parts By Extrusion Stereolithography

NASA Technical Reports Server (NTRS)

Stuffle, Kevin; Mulligan, A.; Creegan, P.; Boulton, J. M.; Lombardi, J. L.; Calvert, P. D.

1996-01-01

Extrusion stereolithography developmental method of computer-controlled manufacturing of objects out of ceramic/polymer composite materials. Computer-aided design/computer-aided manufacturing (CAD/CAM) software used to create image of desired part and translate image into motion commands for combination of mechanisms moving resin dispenser. Extrusion performed in coordination with motion of dispenser so buildup of extruded material takes on size and shape of desired part. Part thermally cured after deposition.

Manufacturing Methods and Technology Project Summary Reports

DTIC Science & Technology

1985-06-01

Computer -Aided Design (CAD)/ Computer -Aided Manufacturing (CAM) Process for the Production of Cold Forged Gears Project 483 6121 - Robotic Welding and...Caliber Projectile Bodies Project 682 8370 - Automatic Inspection and 1-I1 Process Control of Weapons Parts Manufacturing METALS Project 181 7285 - Cast...designed for use on each project. Experience suggested that a general purpose computer interface might be designed that could be used on any project

User's manual: Computer-aided design programs for inductor-energy-storage dc-to-dc electronic power converters

NASA Technical Reports Server (NTRS)

Huffman, S.

1977-01-01

Detailed instructions on the use of two computer-aided-design programs for designing the energy storage inductor for single winding and two winding dc to dc converters are provided. Step by step procedures are given to illustrate the formatting of user input data. The procedures are illustrated by eight sample design problems which include the user input and the computer program output.

Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review.

PubMed

Ewers, R; Schicho, K; Undt, G; Wanschitz, F; Truppe, M; Seemann, R; Wagner, A

2005-01-01

Computer-aided surgical navigation technology is commonly used in craniomaxillofacial surgery. It offers substantial improvement regarding esthetic and functional aspects in a range of surgical procedures. Based on augmented reality principles, where the real operative site is merged with computer generated graphic information, computer-aided navigation systems were employed, among other procedures, in dental implantology, arthroscopy of the temporomandibular joint, osteotomies, distraction osteogenesis, image guided biopsies and removals of foreign bodies. The decision to perform a procedure with or without computer-aided intraoperative navigation depends on the expected benefit to the procedure as well as on the technical expenditure necessary to achieve that goal. This paper comprises the experience gained in 12 years of research, development and routine clinical application. One hundred and fifty-eight operations with successful application of surgical navigation technology--divided into five groups--are evaluated regarding the criteria "medical benefit" and "technical expenditure" necessary to perform these procedures. Our results indicate that the medical benefit is likely to outweight the expenditure of technology with few exceptions (calvaria transplant, resection of the temporal bone, reconstruction of the orbital floor). Especially in dental implantology, specialized software reduces time and additional costs necessary to plan and perform procedures with computer-aided surgical navigation.

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing.

PubMed

Kazakis, Georgios; Kanellopoulos, Ioannis; Sotiropoulos, Stefanos; Lagaros, Nikos D

2017-10-01

Construction industry has a major impact on the environment that we spend most of our life. Therefore, it is important that the outcome of architectural intuition performs well and complies with the design requirements. Architects usually describe as "optimal design" their choice among a rather limited set of design alternatives, dictated by their experience and intuition. However, modern design of structures requires accounting for a great number of criteria derived from multiple disciplines, often of conflicting nature. Such criteria derived from structural engineering, eco-design, bioclimatic and acoustic performance. The resulting vast number of alternatives enhances the need for computer-aided architecture in order to increase the possibility of arriving at a more preferable solution. Therefore, the incorporation of smart, automatic tools in the design process, able to further guide designer's intuition becomes even more indispensable. The principal aim of this study is to present possibilities to integrate automatic computational techniques related to topology optimization in the phase of intuition of civil structures as part of computer aided architectural design. In this direction, different aspects of a new computer aided architectural era related to the interpretation of the optimized designs, difficulties resulted from the increased computational effort and 3D printing capabilities are covered here in.

Development and evaluation of a breast cancer prevention decision aid for higher‐risk women

PubMed Central

Stacey, Dawn; O'Connor, Annette M.; DeGrasse, Cathy; Verma, Shailendra

2003-01-01

Abstract Objective  To develop and evaluate the effectiveness of a breast cancer prevention decision aid for women aged 50 and older at higher risk of breast cancer. Design  Pre‐test–post‐test study using decision aid alone and in combination with counselling. Setting  Breast Cancer Risk Assessment Clinic. Participants  Twenty‐seven women aged 50–69 with 1.66% or higher 5‐year risk of breast cancer. Intervention  Self‐administered breast cancer prevention decision aid. Main outcome measures  Acceptability; decisional conflict; knowledge; realistic expectations; choice predisposition; intention to improve life‐style practices; psychological distress; and satisfaction with preparation for consultation. Results  The decision aid alone, or in combination with counselling, decreased some dimensions of decisional conflict, increased knowledge (P < 0.01), and created more realistic expectations (P < 0.01). The aid in combination with counselling, significantly reduced decisional conflict (P < 0.01) and psychological distress (P < 0.02), helped the uncertain become certain (P < 0.02), and increased intentions to adopt healthier life‐style practices (P < 0.03). Women rated the aid as acceptable, and both women and practitioners were satisfied with the effect it had on the counselling session. Conclusion  The decision aid shows promise as a useful decision support tool. Further research should compare the effect of the decision aid in combination with counselling to counselling alone. PMID:12603624

Visual and computer software-aided estimates of Dupuytren's contractures: correlation with clinical goniometric measurements.

PubMed

Smith, R P; Dias, J J; Ullah, A; Bhowal, B

2009-05-01

Corrective surgery for Dupuytren's disease represents a significant proportion of a hand surgeon's workload. The decision to go ahead with surgery and the success of surgery requires measuring the degree of contracture of the diseased finger(s). This is performed in clinic with a goniometer, pre- and postoperatively. Monitoring the recurrence of the contracture can inform on surgical outcome, research and audit. We compared visual and computer software-aided estimation of Dupuytren's contractures to clinical goniometric measurements in 60 patients with Dupuytren's disease. Patients' hands were digitally photographed. There were 76 contracted finger joints--70 proximal interphalangeal joints and six distal interphalangeal joints. The degrees of contracture of these images were visually assessed by six orthopaedic staff of differing seniority and re-assessed with computer software. Across assessors, the Pearson correlation between the goniometric measurements and the visual estimations was 0.83 and this significantly improved to 0.88 with computer software. Reliability with intra-class correlations achieved 0.78 and 0.92 for the visual and computer-aided estimations, respectively, and with test-retest analysis, 0.92 for visual estimation and 0.95 for computer-aided measurements. Visual estimations of Dupuytren's contractures correlate well with actual clinical goniometric measurements and improve further if measured with computer software. Digital images permit monitoring of contracture after surgery and may facilitate research into disease progression and auditing of surgical technique.

Evaluation and Assessment of a Biomechanics Computer-Aided Instruction.

ERIC Educational Resources Information Center

Washington, N.; Parnianpour, M.; Fraser, J. M.

1999-01-01

Describes the Biomechanics Tutorial, a computer-aided instructional tool that was developed at Ohio State University to expedite the transition from lecture to application for undergraduate students. Reports evaluation results that used statistical analyses and student questionnaires to show improved performance on posttests as well as positive…

Computer Aided Reference Services in the Academic Library: Experiences in Organizing and Operating an Online Reference Service.

ERIC Educational Resources Information Center

Hoover, Ryan E.

1979-01-01

Summarizes the development of the Computer-Aided Reference Services (CARS) division of the University of Utah Libraries' reference department. Development, organizational structure, site selection, equipment, management, staffing and training considerations, promotion and marketing, budget and pricing, record keeping, statistics, and evaluation…

The Use of Computers to Aid Instruction in Beginning Chemistry

ERIC Educational Resources Information Center

Grandey, Robert C.

1971-01-01

Describes computer-aided lessons for determining chemical formulas from composition by weight, quantities from chemical equations, and balancing equations for oxidation-reduction reactions. Lessons were developed and used on the PLATO system at the University of Illinois. A brief analysis of student attitudes and of effectiveness of the programs…

Does Computer-Aided Formative Assessment Improve Learning Outcomes?

ERIC Educational Resources Information Center

Hannah, John; James, Alex; Williams, Phillipa

2014-01-01

Two first-year engineering mathematics courses used computer-aided assessment (CAA) to provide students with opportunities for formative assessment via a series of weekly quizzes. Most students used the assessment until they achieved very high (>90%) quiz scores. Although there is a positive correlation between these quiz marks and the final…

Computer Aided Drafting. Instructor's Guide.

ERIC Educational Resources Information Center

Henry, Michael A.

This guide is intended for use in introducing students to the operation and applications of computer-aided drafting (CAD) systems. The following topics are covered in the individual lessons: understanding CAD (CAD versus traditional manual drafting and care of software and hardware); using the components of a CAD system (primary and other input…

Electronic Computer Aided Design. Its Application in FE.

ERIC Educational Resources Information Center

Further Education Unit, London (England).

A study was conducted at the Electronics Industrial Unit at the Dorset Institute of Higher Education to investigate the feasibility of incorporating computer-aided design (CAD) in electrical and electronic courses. The aim was to investigate the application of CAD to electrical and electronic systems; the extent to which industrial developments…

Computer-Aided Instruction.

ERIC Educational Resources Information Center

Hunt, Graham

This report discusses the impact of and presents guidelines for developing a computer-aided instructional (CAI) system. The first section discusses CAI in terms of the need for the countries of Asia to increase their economic self-sufficiency. The second section examines various theories on the nature of learning with special attention to the role…

A Model for Intelligent Computer-Aided Education Systems.

ERIC Educational Resources Information Center

Du Plessis, Johan P.; And Others

1995-01-01

Proposes a model for intelligent computer-aided education systems that is based on cooperative learning, constructive problem-solving, object-oriented programming, interactive user interfaces, and expert system techniques. Future research is discussed, and a prototype for teaching mathematics to 10- to 12-year-old students is appended. (LRW)

Computer Aided Training of Cognitive Processing Strategies with Developmentally Handicapped Adults.

ERIC Educational Resources Information Center

Ryba, Kenneth A.; And Others

1985-01-01

Correlational results involving 60 developmentally handicaped adults indicated that a computerized cross-modal memory game had a highly significant relationship with most cognitive and motor coordination measures. Computer aided training was not effective in improving overall cognitive functioning. There was no evidence of cognitive skills being…

Computer-Simulated Psychotherapy as an Aid in Teaching Clinical Psychology.

ERIC Educational Resources Information Center

Suler, John R.

1987-01-01

Describes how Elisa, a widely known computer program which simulates the responses of a psychotherapist, can be used as a teaching aid in undergraduate clinical psychology classes. Provides information on conducting the exercise, integrating it into the course syllabus, and evaluating its impact on students. (JDH)

Schools (Students) Exchanging CAD/CAM Files over the Internet.

ERIC Educational Resources Information Center

Mahoney, Gary S.; Smallwood, James E.

This document discusses how students and schools can benefit from exchanging computer-aided design/computer-aided manufacturing (CAD/CAM) files over the Internet, explains how files are exchanged, and examines the problem of selected hardware/software incompatibility. Key terms associated with information search services are defined, and several…

A Computer-Aided Exercise for Checking Novices' Understanding of Market Equilibrium Changes.

ERIC Educational Resources Information Center

Katz, Arnold

1999-01-01

Describes a computer-aided supplement to the introductory microeconomics course that enhances students' understanding with simulation-based tools for reviewing what they have learned from lectures and conventional textbooks about comparing market equilibria. Includes a discussion of students' learning progressions and retention after using the…

Computer Aided Evaluation of Higher Education Tutors' Performance

ERIC Educational Resources Information Center

Xenos, Michalis; Papadopoulos, Thanos

2007-01-01

This article presents a method for computer-aided tutor evaluation: Bayesian Networks are used for organizing the collected data about tutors and for enabling accurate estimations and predictions about future tutor behavior. The model provides indications about each tutor's strengths and weaknesses, which enables the evaluator to exploit strengths…

Software Engineering Techniques for Computer-Aided Learning.

ERIC Educational Resources Information Center

Ibrahim, Bertrand

1989-01-01

Describes the process for developing tutorials for computer-aided learning (CAL) using a programing language rather than an authoring system. The workstation used is described, the use of graphics is discussed, the role of a local area network (LAN) is explained, and future plans are discussed. (five references) (LRW)

National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

ERIC Educational Resources Information Center

Heidari, Farzin

The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

Computer-Aided Corrosion Program Management

NASA Technical Reports Server (NTRS)

MacDowell, Louis

2010-01-01

This viewgraph presentation reviews Computer-Aided Corrosion Program Management at John F. Kennedy Space Center. The contents include: 1) Corrosion at the Kennedy Space Center (KSC); 2) Requirements and Objectives; 3) Program Description, Background and History; 4) Approach and Implementation; 5) Challenges; 6) Lessons Learned; 7) Successes and Benefits; and 8) Summary and Conclusions.

APPLICATION OF 3D COMPUTER-AIDED TOMOGRAPHY TO THE QUANTIFICATION OF MARINE SEDIMENT COMMUNITIES IN POLLUTION GRADIENTS

EPA Science Inventory

Computer-Aided Tomography (CT) has been demonstrated to be a cost efficient tool for the qualitative and quantitative study of estuarine benthic communities along pollution gradients.
Now we have advanced this technology to successfully visualize and discriminate three dimen...

CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) Highlights.

DTIC Science & Technology

1984-10-01

ATTN: AMCRE-C/Ms. Jean Lamb C dr, ATTN: ANCRM-P/Mr. Jerry Gibson Cdr, ATTN: AMCQA-E/Mr. Billings Cdr, ATTN: AMXAM-TL/Technical Library US Army...Sands Missile Range, ATTN: STEWS -TE-TL/Technical Library Cdr, US Military Academy, ATTN: LTC Lanse Leach - - . Cdr, Yuma Proving Grounds, ATTN

Braided Composites for Aerospace Applications. (Latest citations from the Aerospace Database)

NASA Technical Reports Server (NTRS)

1996-01-01

The bibliography contains citations concerning the design, fabrication, and testing of structural composites formed by braiding machines. Topics include computer aided design and associated computer aided manufacture of braided tubular and flat forms. Applications include aircraft and spacecraft structures, where high shear strength and stiffness are required.

Teaching Undergraduates about AIDS: An Action-Oriented Approach.

ERIC Educational Resources Information Center

Christensen, Kimberly

1991-01-01

The creator of an undergraduate course on Acquired Immune Deficiency Syndrome (AIDS) argues that one must teach both risk reduction and awareness of the deeper political and social issues. Education should help students combat powerlessness by active involvement in AIDS efforts. The techniques include risk assessment, student journals, required…

AIDS and its effects on the advancement of women.

PubMed

1989-01-01

This document gives an overview of the worldwide spread of acquired immune deficiency syndrome (AIDS), the means of its prevention, and its effects on women who are not infected. It also explains how the AIDS virus is not spread, and why it is important not to be afraid of those infected with the AIDS virus. It stresses the need for information at a time when a vaccine or cure are not yet available, and education is the only means of prevention. The global mobilization being conducted to fight the AIDS crisis is discussed. Different ways in which women are at risk to infection by the HIV virus are reviewed, especially the subordination of women. This denies them the same education, legal rights, training, health, and independent incomes, all of which reduces their chance for access to information about AIDS. It considers risk of being infected by a partner, from a blood transfusion, increased susceptibility in someone who already has a sexually transmitted disease, increased susceptibility in a woman who has been circumcised, risk of infection from rape, and how women are coerced into prostitution, putting them at risk for AIDS. It also covers HIV infection and contraception, the danger to professional health-care workers, transmission of HIV infection from mother-to-infant, and discrimination that is AIDS-related. Women who are not infected are impacted by AIDS because they suffer stress as caretakers. The document also discusses the social and economic consequences of AIDS.

Visualizing risks in cancer communication: A systematic review of computer-supported visual aids.

PubMed

Stellamanns, Jan; Ruetters, Dana; Dahal, Keshav; Schillmoeller, Zita; Huebner, Jutta

2017-08-01

Health websites are becoming important sources for cancer information. Lay users, patients and carers seek support for critical decisions, but they are prone to common biases when quantitative information is presented. Graphical representations of risk data can facilitate comprehension, and interactive visualizations are popular. This review summarizes the evidence on computer-supported graphs that present risk data and their effects on various measures. The systematic literature search was conducted in several databases, including MEDLINE, EMBASE and CINAHL. Only studies with a controlled design were included. Relevant publications were carefully selected and critically appraised by two reviewers. Thirteen studies were included. Ten studies evaluated static graphs and three dynamic formats. Most decision scenarios were hypothetical. Static graphs could improve accuracy, comprehension, and behavioural intention. But the results were heterogeneous and inconsistent among the studies. Dynamic formats were not superior or even impaired performance compared to static formats. Static graphs show promising but inconsistent results, while research on dynamic visualizations is scarce and must be interpreted cautiously due to methodical limitations. Well-designed and context-specific static graphs can support web-based cancer risk communication in particular populations. The application of dynamic formats cannot be recommended and needs further research. Copyright © 2017 Elsevier B.V. All rights reserved.

Intuitive and interpretable visual communication of a complex statistical model of disease progression and risk.

PubMed

Jieyi Li; Arandjelovic, Ognjen

2017-07-01

Computer science and machine learning in particular are increasingly lauded for their potential to aid medical practice. However, the highly technical nature of the state of the art techniques can be a major obstacle in their usability by health care professionals and thus, their adoption and actual practical benefit. In this paper we describe a software tool which focuses on the visualization of predictions made by a recently developed method which leverages data in the form of large scale electronic records for making diagnostic predictions. Guided by risk predictions, our tool allows the user to explore interactively different diagnostic trajectories, or display cumulative long term prognostics, in an intuitive and easily interpretable manner.

Adolescents' AIDS Risk Taking: A Rational Choice Perspective.

ERIC Educational Resources Information Center

Gardner, William; Herman, Janna

1990-01-01

Discounts the belief in adolescents' irrational behavior, and proposes a rational choice decision-making theory of adolescent risk-taking behavior. Suggests that social ecology affects risk-taking choices. Proposals for AIDS education concern delayed initiation of sexual activity, promotion of condom use, and counseling of high-risk adolescents.…

Systematic Review of Decision Aids for Newly Diagnosed Patients with Prostate Cancer Making Treatment Decisions.

PubMed

Adsul, Prajakta; Wray, Ricardo; Spradling, Kyle; Darwish, Oussama; Weaver, Nancy; Siddiqui, Sameer

2015-11-01

Despite established evidence for using patient decision aids, use with newly diagnosed patients with prostate cancer remains limited partly due to variability in aid characteristics. We systematically reviewed decision aids for newly diagnosed patients with prostate cancer. Published peer reviewed journal articles, unpublished literature on the Internet and the Ottawa decision aids web repository were searched to identify decision aids designed for patients with prostate cancer facing treatment decisions. A total of 14 aids were included in study. Supplementary materials on aid development and published studies evaluating the aids were also included. We studied aids designed to help patients make specific choices among options and outcomes relevant to health status that were specific to prostate cancer treatment and in English only. Aids were reviewed for IPDAS (International Patient Decision Aid Standards) and additional standards deemed relevant to prostate cancer treatment decisions. They were also reviewed for novel criteria on the potential for implementation. Acceptable interrater reliability was achieved at Krippendorff α = 0.82. Eight of the 14 decision aids (57.1%) were developed in the United States, 6 (42.8%) were print based, 5 (35.7%) were web or print based and only 4 (28.5%) had been updated since 2013. Ten aids (71.4%) were targeted to prostate cancer stage. All discussed radiation and surgery, 10 (71.4%) discussed active surveillance and/or watchful waiting and 8 (57.1%) discussed hormonal therapy. Of the aids 64.2% presented balanced perspectives on treatment benefits and risks, and/or outcome probabilities associated with each option. Ten aids (71.4%) presented value clarification prompts for patients and steps to make treatment decisions. No aid was tested with physicians and only 4 (28.6%) were tested with patients. Nine aids (64.2%) provided details on data appraisal and 4 (28.6%) commented on the quality of evidence used. Seven of the 8 web or computer based aids (87.5%) provided patients with the opportunity to interact with the aid. All except 1 aid scored above the 9th grade reading level. No evidence on aid implementation in routine practice was available. As physicians look to adopt decision aids in practice, they may base the choice of aid on characteristics that correlate with patient socioeconomic and educational status, personal practice style and practice setting. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Improved computer-aided detection of small polyps in CT colonography using interpolation for curvature estimationa

PubMed Central

Liu, Jiamin; Kabadi, Suraj; Van Uitert, Robert; Petrick, Nicholas; Deriche, Rachid; Summers, Ronald M.

2011-01-01

Purpose: Surface curvatures are important geometric features for the computer-aided analysis and detection of polyps in CT colonography (CTC). However, the general kernel approach for curvature computation can yield erroneous results for small polyps and for polyps that lie on haustral folds. Those erroneous curvatures will reduce the performance of polyp detection. This paper presents an analysis of interpolation’s effect on curvature estimation for thin structures and its application on computer-aided detection of small polyps in CTC. Methods: The authors demonstrated that a simple technique, image interpolation, can improve the accuracy of curvature estimation for thin structures and thus significantly improve the sensitivity of small polyp detection in CTC. Results: Our experiments showed that the merits of interpolating included more accurate curvature values for simulated data, and isolation of polyps near folds for clinical data. After testing on a large clinical data set, it was observed that sensitivities with linear, quadratic B-spline and cubic B-spline interpolations significantly improved the sensitivity for small polyp detection. Conclusions: The image interpolation can improve the accuracy of curvature estimation for thin structures and thus improve the computer-aided detection of small polyps in CTC. PMID:21859029

System integration of pattern recognition, adaptive aided, upper limb prostheses

NASA Technical Reports Server (NTRS)

Lyman, J.; Freedy, A.; Solomonow, M.

1975-01-01

The requirements for successful integration of a computer aided control system for multi degree of freedom artificial arms are discussed. Specifications are established for a system which shares control between a human amputee and an automatic control subsystem. The approach integrates the following subsystems: (1) myoelectric pattern recognition, (2) adaptive computer aiding; (3) local reflex control; (4) prosthetic sensory feedback; and (5) externally energized arm with the functions of prehension, wrist rotation, elbow extension and flexion and humeral rotation.

Women and AIDS: the ethics of exaggerated harm.

PubMed

Mertz, David; Sushinsky, Mary Ann; Schüklenk, Udo

1996-04-01

This article examines the way in which some biomedical ethicists have constructed sexually transmitted AIDS as a significant threat to women's health. We demonstrate that the familiar claim that 'women are the fastest growing group' -- whether of HIV-infected or of AIDS patients -- is misleading because it obscures the distinction between proportional rate of growth and absolute increase. Feminist ethicists have suggested that misogyny of a male dominated health care system has led to underreporting of women AIDS cases in order to support these feminists' claim of AIDS being a real threat to women's health. Given the apparent rarity of tertiary transmissions of AIDS, the assertion that most or even many women are at significant risk for AIDS seems wrong. Particularly disturbing in this campaign is the fact that the theme of 'risky sex' has been extended all the way to lesbians, even though their risk to acquire AIDS sexually is non-existent to miniscule. We argue that actual harm is done to women by this exaggeration of their risk of contracting AIDS sexually. The scare has led to misappropriations of scarce health care funds. AIDS disproportionately affects women who inject drugs, and who suffer other diseases, poverty and malnutrition. It would have been better to concentrate health care efforts in this area instead of 'educating' women not at risk for AIDS how to prevent the acquisition of this disease. Unjustifiable AIDS anxiety has been created in women and has resulted in millions of unnecessary HIV-tests, and many broken relationships. This anxiety has inevitably reduced the pleasure of having sex for many women. We reject the kind of 'victim ideology' that lies at the heart of this strategy which has, unfortunately, been supported by a number of influential feminist ethicists.

Cancer incidence and mortality for all causes in HIV-infected patients over a quarter century: a multicentre cohort study.

PubMed

Raffetti, Elena; Albini, Laura; Gotti, Daria; Segala, Daniela; Maggiolo, Franco; di Filippo, Elisa; Saracino, Annalisa; Ladisa, Nicoletta; Lapadula, Giuseppe; Fornabaio, Chiara; Castelnuovo, Filippo; Casari, Salvatore; Fabbiani, Massimiliano; Pierotti, Piera; Donato, Francesco; Quiros-Roldan, Eugenia

2015-03-12

We aimed to assess cancer incidence and mortality for all-causes and factors related to risk of death in an Italian cohort of HIV infected unselected patients as compared to the general population. We conducted a retrospective (1986-2012) cohort study on 16 268 HIV infected patients enrolled in the MASTER cohort. The standardized incidence ratios (SIRs) and standardized mortality ratios (SMRs) were computed using cancer incidence rates of Italian Cancer Registries and official national data for overall mortality. The risk factors for death from all causes were assessed using Poisson regression models. 1,195 cancer cases were diagnosed from 1986 to 2012: 700 AIDS-defining-cancers (ADCs) and 495 non-AIDS-defining-cancers (NADCs). ADC incidence was much higher than the Italian population (SIR = 30.8, 95% confidence interval 27.9-34.0) whereas NADC incidence was similar to the general population (SIR = 0.9, 95% CI 0.8-1.1). The SMR for all causes was 11.6 (11.1-12.0) in the period, and it decreased over time, mainly after 1996, up to 3.53 (2.5-4.8) in 2012. Male gender, year of enrolment before 1993, older age at enrolment, intravenous drug use, low CD4 cell count, AIDS event, cancer occurrence and the absence of antiretroviral therapy were all associated independently with risk of death. In HIV infected patients, ADC but not NADC incidence rates were higher than the general population. Although overall mortality in HIV infected subjects decreased over time, it is about three-fold higher than the general population at present.

Computer Aided Design of Computer Generated Holograms for electron beam fabrication

NASA Technical Reports Server (NTRS)

Urquhart, Kristopher S.; Lee, Sing H.; Guest, Clark C.; Feldman, Michael R.; Farhoosh, Hamid

1989-01-01

Computer Aided Design (CAD) systems that have been developed for electrical and mechanical design tasks are also effective tools for the process of designing Computer Generated Holograms (CGHs), particularly when these holograms are to be fabricated using electron beam lithography. CAD workstations provide efficient and convenient means of computing, storing, displaying, and preparing for fabrication many of the features that are common to CGH designs. Experience gained in the process of designing CGHs with various types of encoding methods is presented. Suggestions are made so that future workstations may further accommodate the CGH design process.

Correlation of emphysema score with perceived malignancy of pulmonary nodules: a multi-observer study using the LIDC-IDRI CT lung database

NASA Astrophysics Data System (ADS)

Wiemker, Rafael; Bülow, Thomas; Blaffert, Thomas; Dharaiya, Ekta

2009-02-01

Presence of emphysema is recognized to be one of the single most significant risk factors in risk models for the prediction of lung cancer. Therefore, an automatically computed emphysema score would be a prime candidate as an additional numerical feature for computer aided diagnosis (CADx) for indeterminate pulmonary nodules. We have applied several histogram-based emphysema scores to 460 thoracic CT scans from the IDRI CT lung image database, and analyzed the emphysema scores in conjunction with 3000 nodule malignancy ratings of 1232 pulmonary nodules made by expert observers. Despite the emphysema being a known risk factor, we have not found any impact on the readers' malignancy rating of nodules found in a patient with higher emphysema score. We have also not found any correlation between the number of expert-detected nodules in a patient and his emphysema score, or the relative craniocaudal location of the nodules and their malignancy rating. The inter-observer agreement of the expert ratings was excellent on nodule diameter (as derived from manual delineations), good for calcification, and only modest for malignancy and shape descriptions such as spiculation, lobulation, margin, etc.

Patient-specific polyetheretherketone facial implants in a computer-aided planning workflow.

PubMed

Guevara-Rojas, Godoberto; Figl, Michael; Schicho, Kurt; Seemann, Rudolf; Traxler, Hannes; Vacariu, Apostolos; Carbon, Claus-Christian; Ewers, Rolf; Watzinger, Franz

2014-09-01

In the present study, we report an innovative workflow using polyetheretherketone (PEEK) patient-specific implants for esthetic corrections in the facial region through onlay grafting. The planning includes implant design according to virtual osteotomy and generation of a subtraction volume. The implant design was refined by stepwise changing the implant geometry according to soft tissue simulations. One patient was scanned using computed tomography. PEEK implants were interactively designed and manufactured using rapid prototyping techniques. Positioning intraoperatively was assisted by computer-aided navigation. Two months after surgery, a 3-dimensional surface model of the patient's face was generated using photogrammetry. Finally, the Hausdorff distance calculation was used to quantify the overall error, encompassing the failures in soft tissue simulation and implantation. The implant positioning process during surgery was satisfactory. The simulated soft tissue surface and the photogrammetry scan of the patient showed a high correspondence, especially where the skin covered the implants. The mean total error (Hausdorff distance) was 0.81 ± 1.00 mm (median 0.48, interquartile range 1.11). The spatial deviation remained less than 0.7 mm for the vast majority of points. The proposed workflow provides a complete computer-aided design, computer-aided manufacturing, and computer-aided surgery chain for implant design, allowing for soft tissue simulation, fabrication of patient-specific implants, and image-guided surgery to position the implants. Much of the surgical complexity resulting from osteotomies of the zygoma, chin, or mandibular angle might be transferred into the planning phase of patient-specific implants. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Increased risk of histologically defined cancer subtypes in human immunodeficiency virus-infected individuals: clues for possible immunosuppression-related or infectious etiology.

PubMed

Shiels, Meredith S; Engels, Eric A

2012-10-01

Malignancies that occur in excess among human immunodeficiency virus (HIV)-infected individuals may be caused by immunosuppression or infections. Because histologically defined cancer subtypes have not been systematically evaluated, their risk was assessed among people with acquired immunodeficiency syndrome (AIDS). Analyses included 569,268 people with AIDS from the HIV/AIDS Cancer Match Study, a linkage of 15 US population-based HIV/AIDS and cancer registries during 1980 to 2007. Standardized incidence ratios (SIRs) were estimated to compare cancer risk in people with AIDS to the general population overall, and stratified by age, calendar period (a proxy of changing HIV therapies), and time since onset of AIDS (a proxy of immunosuppression). Sixteen individual cancer histologies or histology groupings manifested significantly elevated SIRs. Risks were most elevated for adult T cell leukemia/lymphoma (SIR = 11.3), neoplasms of histiocytes and accessory lymphoid cells (SIR = 10.7), giant cell carcinoma (SIR = 7.51), and leukemia not otherwise specified (SIR = 6.69). SIRs ranged from 1.4 to 4.6 for spindle cell carcinoma, bronchioloalveolar adenocarcinoma, adnexal and skin appendage neoplasms, sarcoma not otherwise specified, spindle cell sarcoma, leiomyosarcoma, mesothelioma, germ cell tumors, plasma cell tumors, immunoproliferative diseases, acute lymphocytic leukemia, and myeloid leukemias. For several of these cancer subtypes, significant declines in SIRs were observed across calendar periods (consistent with decreasing risk with improved HIV therapies) or increase in SIRs with time since onset of AIDS (ie, prolonged immunosuppression). The elevated risk of certain cancer subtypes in people with AIDS may point to an etiologic role of immunosuppression or infection. Future studies are needed to further investigate these associations and evaluate candidate infectious agents. Copyright © 2012 American Cancer Society.

Computational Approaches for Analyzing Tradeoffs between Training and Aiding. Final Technical Paper for Period February-December 1989.

ERIC Educational Resources Information Center

Rouse, William B.; Johnson, William B.

A methodological framework is presented for representing tradeoffs among alternative combinations of training and aiding for personnel in complex situations. In general, more highly trained people need less aid, and those with less training need more aid. Balancing training and aiding to accomplish the objectives of the system in a cost effective…

Evaluation of a Community Health Worker Intervention to Reduce HIV/AIDS Stigma and Increase HIV Testing Among Underserved Latinos in the Southwestern U.S.

PubMed Central

Becker, Davida; Espinoza, Lilia; Nguyen-Rodriguez, Selena; Diaz, Gaby; Carricchi, Ana; Galvez, Gino; Garcia, Melawhy

2015-01-01

Objectives Latinos are at an elevated risk for HIV infection. Continued HIV/AIDS stigma presents barriers to HIV testing and affects the quality of life of HIV-positive individuals, yet few interventions addressing HIV/AIDS stigma have been developed for Latinos. Methods An intervention led by community health workers (promotores de salud, or promotores) targeting underserved Latinos in three southwestern U.S. communities was developed to decrease HIV/AIDS stigma and increase HIV knowledge and perception of risk. The intervention was led by HIV-positive and HIV-affected (i.e., those who have, or have had, a close family member or friend with HIV/AIDS) promotores, who delivered interactive group-based educational sessions to groups of Latinos in Spanish and English. To decrease stigma and motivate behavioral and attitudinal change, the educational sessions emphasized positive Latino cultural values and community assets. The participant pool comprised 579 Latino adults recruited in El Paso, Texas (n=204); San Ysidro, California (n=175); and Los Angeles, California (n=200). Results From pretest to posttest, HIV/AIDS stigma scores decreased significantly (p<0.001). Significant increases were observed in HIV/AIDS knowledge (p<0.001), willingness to discuss HIV/AIDS with one's sexual partner (p<0.001), and HIV risk perception (p=0.006). Willingness to test for HIV in the three months following the intervention did not increase. Women demonstrated a greater reduction in HIV/AIDS stigma scores when compared with their male counterparts, which may have been related to a greater increase in HIV/AIDS knowledge scores (p=0.016 and p=0.007, respectively). Conclusion Promotores interventions to reduce HIV/AIDS stigma and increase HIV-related knowledge, perception of risk, and willingness to discuss sexual risk with partners show promise in reaching underserved Latino communities. PMID:26327724

[Is there risk of AIDS among adolescents?].

PubMed

Molina Cartes, R

1988-01-01

No data are as yet available on the information and attitudes of the adolescent population of Chile regarding AIDS. A survey of 800 adolescents aged 16-19 in Massachusetts, US, indicated that 29% had no knowledge of AIDS, 70% were sexually active, and 15% would not change their sex habits to avoid AIDS. A study in Santiago, Chile, showed that young people with the least information on sex and reproduction had the earliest initiation of sexual activity and the most frequent relations. Surveys throughout Latin America have indicated that a significant proportion of adolescents have active sex lives, leaving them potentially vulnerable to risk of sexually transmitted diseases. The risk is increased by frequent changes of partners among couples not yet strongly committed to each other. The World Health Organization considers prevention of sexually transmitted diseases to be one of the main objectives of family planning programs for adolescents. Studies in various countries found that proportion of sexually active adolescents who routinely used condoms was low. The evidence thus indicates that adolescents are at substantial risk of AIDS through their lack of information about AIDS, their significant sexual activity, and their failure to use condoms. Measures to combat or minimize the threat of AIDS among adolescents should begin with educational programs beginning with teachers and families. Efforts should be made to reach young people in the informal sector who are at greatest risk through community based programs.

Computer-aided drug design for AMP-activated protein kinase activators.

PubMed

Wang, Zhanli; Huo, Jianxin; Sun, Lidan; Wang, Yongfu; Jin, Hongwei; Yu, Hui; Zhang, Liangren; Zhou, Lishe

2011-09-01

AMP-activated protein kinase (AMPK) is an important therapeutic target for the potential treatment of metabolic disorders, cardiovascular disease and cancer. Recently, various classes of compounds that activate AMPK by direct or indirect interactions have been reported. The importance of computer-aided drug design approaches in the search for potent activators of AMPK is now established, including structure-based design, ligand-based design, fragment-based design, as well as structural analysis. This review article highlights the computer-aided drug design approaches utilized to discover of activators targeting AMPK. The principles, advantages or limitation of the different methods are also being discussed together with examples of applications taken from the literatures.

Computer-aided dental prostheses construction using reverse engineering.

PubMed

Solaberrieta, E; Minguez, R; Barrenetxea, L; Sierra, E; Etxaniz, O

2014-01-01

The implementation of computer-aided design/computer-aided manufacturing (CAD/CAM) systems with virtual articulators, which take into account the kinematics, constitutes a breakthrough in the construction of customised dental prostheses. This paper presents a multidisciplinary protocol involving CAM techniques to produce dental prostheses. This protocol includes a step-by-step procedure using innovative reverse engineering technologies to transform completely virtual design processes into customised prostheses. A special emphasis is placed on a novel method that permits a virtual location of the models. The complete workflow includes the optical scanning of the patient, the use of reverse engineering software and, if necessary, the use of rapid prototyping to produce CAD temporary prostheses.

Computer-Aided Process and Tools for Mobile Software Acquisition

DTIC Science & Technology

2013-07-30

moldo^j= pmlkploba=obmloq=pbofbp= Computer-Aided Process and Tools for Mobile Software Acquisition 30 July 2013 LT Christopher Bonine , USN, Dr...Christopher Bonine is a lieutenant in the United States Navy. He is currently assigned to the Navy Cyber Defense Operations Command in Norfolk, VA. He has...interests are in development and implementation of cyber security policy. Bonine has a master’s in computer science from the Naval Postgraduate School

Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology

NASA Technical Reports Server (NTRS)

Hyde, Patricia R.; Loftin, R. Bowen

1993-01-01

The volume 2 proceedings from the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology are presented. Topics discussed include intelligent computer assisted training (ICAT) systems architectures, ICAT educational and medical applications, virtual environment (VE) training and assessment, human factors engineering and VE, ICAT theory and natural language processing, ICAT military applications, VE engineering applications, ICAT knowledge acquisition processes and applications, and ICAT aerospace applications.

Occupational Risk of HIV, HBV and HSV-2 Infections in Health Care Personnel Caring for AIDS Patients.

ERIC Educational Resources Information Center

Kuhls, Thomas L.; And Others

1987-01-01

Female health care workers with exposure to AIDS patients were studied. Two of the 246 workers showed evidence of opportunistic infections. This analysis confirms the low risk of occupationally acquired HIV infection when hospital infection control practices are employed around AIDS patients. (Author/VM)

Investigating the Impact of Financial Aid on Student Dropout Risks: Racial and Ethnic Differences

ERIC Educational Resources Information Center

Chen, Rong; DesJardins, Stephen L.

2010-01-01

This study focuses on the differences in college student dropout behavior among racial/ethnic groups. We employ event history methods and data from the Beginning Postsecondary Students (BPS) and National Postsecondary Student Aid Study (NPSAS) surveys to investigate how financial aid may differentially influence dropout risks among these student…

Toluidine blue aids in detection of dysplasia and carcinoma in suspicious oral lesions.

PubMed

Chainani-Wu, N; Madden, E; Cox, D; Sroussi, H; Epstein, J; Silverman, S

2015-10-01

Accurate clinical identification of 'higher-risk' oral premalignant lesions or 'higher-risk' areas within lesions is important. Assessment methods that predict their presence have great utility. A cross-sectional, observational study enrolled a consecutive sample of consenting patients diagnosed with oral leukoplakia, erythroleukoplakia, or erythroplakia. Medical history, visual oral examination, ViziLite(®) examination, toluidine blue staining (TBlue(®) ), and finally a biopsy were completed in a single clinic visit. Seventy-seven of 100 examined lesions in 43 patients were biopsied. Sensitivity, specificity, and positive and negative predictive values were computed for visual examination, ViziLite(®) , and TBlue(®) using biopsy results as the gold standard. The sensitivity of TBlue(®) in detecting high-risk lesions (carcinoma in situ or carcinoma) was 94 (71-100, P < 0.0003) and specificity 45 (32-58, P < 0.53), while for carcinoma, sensitivity was 100 (54-100, P < 0.032) and specificity 39 (28-52, P < 0.097). The results of ViziLite(®) testing either by itself or in combination with the information from toluidine blue testing revealed low sensitivity for the detection of high-risk lesions. Clinical examination of leukoplakia, erythroplakia, or erythroleukoplakia lesions combined with toluidine blue staining may aid in the identification of severe dysplasia (carcinoma in situ) or carcinoma. This may help in determining whether, when, and where (the site within a lesion) a biopsy should be taken. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Immuno-virological discordance and the risk of non-AIDS and AIDS events in a large observational cohort of HIV-patients in Europe.

PubMed

Zoufaly, Alexander; Cozzi-Lepri, Alessandro; Reekie, Joanne; Kirk, Ole; Lundgren, Jens; Reiss, Peter; Jevtovic, Djordje; Machala, Ladislav; Zangerle, Robert; Mocroft, Amanda; Van Lunzen, Jan

2014-01-01

The impact of immunosuppression despite virological suppression (immuno-virological discordance, ID) on the risk of developing fatal and non-fatal AIDS/non-AIDS events is unclear and remains to be elucidated. Patients in EuroSIDA starting at least 1 new antiretroviral drug with CD4<350 cells/µl and viral load (VL)>500 copies/mL were followed-up from the first day of VL< = 50 copies/ml until a new fatal/non-fatal non-AIDS/AIDS event. Considered non-AIDS events included non-AIDS malignancies, pancreatitis, severe liver disease with hepatic encephalopathy (>grade 3), cardio- and cerebrovascular events, and end-stage renal disease. Patients were classified over time according to whether current CD4 count was above (non-ID) or below (ID) baseline level. Relative rates (RR) of events were calculated for ID vs. non-ID using adjusted Poisson regression models. 2,913 patients contributed 11,491 person-years for the analysis of non-AIDS. 241 pre-specified non-AIDS events (including 84 deaths) and 89 AIDS events (including 10 deaths) occurred. The RR of developing pre-specified non-AIDS events for ID vs. non-ID was 1.96 (95% CI 1.37-2.81, p<0.001) in unadjusted analysis and 1.43 (0.94-2.17, p = 0.095) after controlling for current CD4 count. ID was not associated with the risk of AIDS events (aRR 0.76, 95% CI 0.41-1.38, p = 0.361). Compared to CD4 responders, patients with immuno-virological discordance may be at increased risk of developing non-AIDS events. Further studies are warranted to establish whether in patients with ID, strategies to directly modify CD4 count response may be needed besides the use of ART.

A global assessment of the role of law in the HIV/AIDS pandemic.

PubMed

Gable, L; Gostin, L; Hodge, J G

2009-03-01

This article examines the dynamic role of law as a tool, and potential barrier, to public health interventions designed to ameliorate the negative impacts of human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) globally. Law impacts the lives of persons living with (and at risk of) HIV/AIDS in many ways. Laws may: (1) help to ensure that public health authorities are empowered to provide effective prevention and treatment programmes; (2) effectuate the human rights to life, health, work, education and property ownership of persons living with, or at risk of, HIV/AIDS; and (3) protect persons living with HIV/AIDS from social risks, stigma and other harms by respecting privacy and prohibiting unwarranted discrimination. However, laws can also create legal barriers in many countries that impede effective HIV/AIDS interventions by penalizing those with HIV/AIDS through criminal sanctions or other policies. As a result, it is recommended globally that laws should facilitate the prevention and treatment of HIV/AIDS consistent with scientific and public health practices and with a human rights framework. Effective use of existing laws that promote the public's health, and reforms of laws which impede it, contribute to improved individual and communal health outcomes concerning HIV/AIDS.

The association between HIV/AIDS-related knowledge and perception of risk for infection: a systematic review.

PubMed

Ndugwa Kabwama, Steven; Berg-Beckhoff, Gabriele

2015-11-01

This systematic review tries to elucidate the association between what people know about HIV/AIDS and how they perceive their risk of infection. The initial search for articles yielded 1,595 abstracts, 16 of which met the inclusion criteria. Five studies found a positive correlation, four reported a negative correlation and seven found no association between knowledge and risk perception. It was found that the existing psychometrically sound measure of HIV/AIDS risk perception had not been used in any of the studies. The context in which the risk is assessed is pivotal to whether an association between knowledge and the perceived risk is found. Biases in judgement such as optimistic bias, psychological distancing, anchoring bias and overconfidence also explain how knowledge may fail to predict risk perception. It was concluded that the association between HIV/AIDS knowledge and risk perception might follow a continuum from positive to no association and finally to negative. The hypothesis, however, still needs to be studied further. © Royal Society for Public Health 2015.

AIDS knowledge and beliefs related to blood donation in US adults: results from a national telephone survey.

PubMed

Steele, Whitney R; High, Patrick M; Schreiber, George B

2012-06-01

Misperceptions about the risk of contracting AIDS from donating blood may be preventing people from donating, while incorrect beliefs about AIDS screening tests or the appropriateness of donating with risk factors may place the blood supply at increased risk. Questions about AIDS transmission and testing and the acceptability of test seeking and donating with risk factors were asked in the National Community Health Survey, a telephone survey of 9859 US adults. Results were weighted to represent the US population. Demographic and donor status (current, lapsed, never) differences in knowledge and attitudes were examined using chi-square and logistic regression. Nearly 25% of respondents thought it was somewhat or very likely that they could get AIDS from donating blood. Almost 80% knew that all blood donations are tested for AIDS, but only 65.5% knew about the test window period. A total of 33.5% felt that it was acceptable to use the blood center for AIDS testing, while 9.1% believed that it was okay for someone to donate even if they had AIDS risk behaviors; all had significant demographic and donor status differences. While there are many factors that prevent people from giving blood, the incorrect belief that it is possible to contract AIDS from donating is likely a barrier to donation. If blood centers dispelled this myth among those who have never donated, especially among minorities, it could be important for recruitment. In addition, our findings indicate that changes to education or recruitment could be needed to discourage test seeking and donations from risky donors. © 2011 American Association of Blood Banks.

The co-occurrence of AIDS and homelessness: results from the integration of administrative databases for AIDS surveillance and public shelter utilisation in Philadelphia.

PubMed

Culhane, D P; Gollub, E; Kuhn, R; Shpaner, M

2001-07-01

Administrative databases from the City of Philadelphia that track public shelter utilisation (n=44 337) and AIDS case reporting (n=7749) were merged to identify rates and risk factors for co-occurring homelessness and AIDS. Multiple decrement life tables analyses were conducted, and logistic regression analyses used to identify risk factors associated with AIDS among the homeless, and homelessness among people with AIDS. City of Philadelphia, Pennsylvania, USA. People admitted to public shelters had a three year rate of subsequent AIDS diagnosis of 1.8 per 100 person years; nine times the rate for the general population of Philadelphia. Logistic regression results show that substance abuse history (OR = 3.14), male gender (OR = 2.05), and a history of serious mental disorder (OR = 1.62) were significantly related to the risk for AIDS diagnosis among shelter users. Among people with AIDS, results show a three year rate of subsequent shelter admission of 6.9 per 100 person years, and a three year rate of prior shelter admission of 9%, three times the three year rate of shelter admission for the general population. Logistic regression results show that intravenous drug user history (OR = 3.14); no private insurance (OR = 2.93); black race (OR = 2.82); pulmonary or extra-pulmonary TB (OR = 1.43); and pneumocystis pneumonia (OR = 0.56) were all related to the risk for shelter admission. Homelessness prevention programmes should target people with HIV risk factors, and HIV prevention programmes should be targeted to homeless persons, as these populations have significant intersection. Reasons and implications for this intersection are discussed.

Minnesota Computer Aided Library System (MCALS); University of Minnesota Subsystem Cost/Benefits Analysis.

ERIC Educational Resources Information Center

Lourey, Eugene D., Comp.

The Minnesota Computer Aided Library System (MCALS) provides a basis of unification for library service program development in Minnesota for eventual linkage to the national information network. A prototype plan for communications functions is illustrated. A cost/benefits analysis was made to show the cost/effectiveness potential for MCALS. System…

Intelligent Computer-Aided Instruction Research at the Open University. CITE Report No. 10.

ERIC Educational Resources Information Center

Elsom-Cook, Mark

This document introduces the aims and activities of the Intelligent Computer Aided Instruction (ICAI) research community situated within the Centre for Information Technology in Education (CITE) at the Open University in Great Britain, outlines the nature of the problems which come under the auspices of ICAI, and describes the research…

Computer-Aided Characterization of Breast Masses on Volumetric Ultrasound Images: An Adjunct to Mammography

DTIC Science & Technology

2005-10-01

nearly setting-independent features and artificial neural networks. Radiology 2003; 226:504-514. 14. Horsch K, Giger ML, Venta LA, Vyborny CJ...Giger ML, Vyborny CJ, Venta LA. Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography. Acad. Radiol. 2004; 11:272

Learning and Optimization of Cognitive Capabilities. Final Project Report.

ERIC Educational Resources Information Center

Lumsdaine, A.A.; And Others

The work of a three-year series of experimental studies of human cognition is summarized in this report. Proglem solving and learning in man-machine interaction was investigated, as well as relevant variables and processes. The work included four separate projects: (1) computer-aided problem solving, (2) computer-aided instruction techniques, (3)…

Preparing Students for Computer Aided Drafting (CAD). A Conceptual Approach.

ERIC Educational Resources Information Center

Putnam, A. R.; Duelm, Brian

This presentation outlines guidelines for developing and implementing an introductory course in computer-aided drafting (CAD) that is geared toward secondary-level students. The first section of the paper, which deals with content identification and selection, includes lists of mechanical drawing and CAD competencies and a list of rationales for…

Teaching Neuroanatomy Using Computer-Aided Learning: What Makes for Successful Outcomes?

ERIC Educational Resources Information Center

Svirko, Elena; Mellanby, Jane

2017-01-01

Computer-aided learning (CAL) is an integral part of many medical courses. The neuroscience course at Oxford University for medical students includes CAL course of neuroanatomy. CAL is particularly suited to this since neuroanatomy requires much detailed three-dimensional visualization, which can be presented on screen. The CAL course was…

An Empathic Avatar in a Computer-Aided Learning Program to Encourage and Persuade Learners

ERIC Educational Resources Information Center

Chen, Gwo-Dong; Lee, Jih-Hsien; Wang, Chin-Yeh; Chao, Po-Yao; Li, Liang-Yi; Lee, Tzung-Yi

2012-01-01

Animated pedagogical agents with characteristics such as facial expressions, gestures, and human emotions, under an interactive user interface are attractive to students and have high potential to promote students' learning. This study proposes a convenient method to add an embodied empathic avatar into a computer-aided learning program; learners…

MOVANAID: An Interactive Aid for Analysis of Movement Capabilities.

ERIC Educational Resources Information Center

Cooper, George E.; And Others

A computer-drive interactive aid for movement analysis, called MOVANAID, has been developed to be of assistance in the performance of certain Army intelligence processing tasks in a tactical environment. It can compute fastest travel times and paths through road networks for military units of various types, as well as fastest times in which…

The Effects of Computer-Aided Instruction on Learning and Attitudes in Economic Principles Courses: Revised Results.

ERIC Educational Resources Information Center

Henry, Mark

1979-01-01

Recounts statistical inaccuracies in an article on computer-aided instruction in economics courses on the college level. The article, published in the J. Econ. Ed (Fall 1978), erroneously placed one student in the TIPS group instead of the control group. Implications of this alteration are discussed. (DB)

Remote Science Operation Center research

NASA Technical Reports Server (NTRS)

Banks, P. M.

1986-01-01

Progress in the following areas is discussed: the design, planning and operation of a remote science payload operations control center; design and planning of a data link via satellite; and the design and prototyping of an advanced workstation environment for multi-media (3-D computer aided design/computer aided engineering, voice, video, text) communications and operations.

Effective Computer-Aided Assessment of Mathematics; Principles, Practice and Results

ERIC Educational Resources Information Center

Greenhow, Martin

2015-01-01

This article outlines some key issues for writing effective computer-aided assessment (CAA) questions in subjects with substantial mathematical or statistical content, especially the importance of control of random parameters and the encoding of wrong methods of solution (mal-rules) commonly used by students. The pros and cons of using CAA and…

Computer Aided Learning of Mathematics: Software Evaluation

ERIC Educational Resources Information Center

Yushau, B.; Bokhari, M. A.; Wessels, D. C. J.

2004-01-01

Computer Aided Learning of Mathematics (CALM) has been in use for some time in the Prep-Year Mathematics Program at King Fahd University of Petroleum & Minerals. Different kinds of software (both locally designed and imported) have been used in the quest of optimizing the recitation/problem session hour of the mathematics classes. This paper…

Incorporating Computer-Aided Software in the Undergraduate Chemical Engineering Core Courses

ERIC Educational Resources Information Center

Alnaizy, Raafat; Abdel-Jabbar, Nabil; Ibrahim, Taleb H.; Husseini, Ghaleb A.

2014-01-01

Introductions of computer-aided software and simulators are implemented during the sophomore-year of the chemical engineering (ChE) curriculum at the American University of Sharjah (AUS). Our faculty concurs that software integration within the curriculum is beneficial to our students, as evidenced by the positive feedback received from industry…

The Effectiveness of a Tablet Computer-Aided Intervention Program for Improving Reading Fluency

ERIC Educational Resources Information Center

Özbek, Ahmet Bilal; Girli, Alev

2017-01-01

The purpose of this study is to determine the effectiveness of a tablet computer-aided intervention program for improving reading fluency. It also investigates the opinions of students and parents about this intervention by using skill- and performance-based techniques, which have been investigated qualitatively. Three students with a learning…

National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

ERIC Educational Resources Information Center

National Coalition for Advanced Manufacturing, Washington, DC.

This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

CAD in der Praxis

NASA Astrophysics Data System (ADS)

Labisch, Susanna

Konstruktion und Fertigung erfolgen in der Praxis fast ausschließlich rechnerunterstützt. Mit diesem Rechnereinsatz beim Konstruieren (CAD, Computer Aided Design) und Fertigen CAM (Computer Aided Manufacturing) scheint die technische Zeichnung an Bedeutung zu verlieren, da die Verständigung zwischen Konstruktions- und Fertigungsabteilung primär durch den Austausch digitaler Daten erfolgen kann.

Gathering Empirical Evidence Concerning Links between Computer Aided Design (CAD) and Creativity

ERIC Educational Resources Information Center

Musta'amal, Aede Hatib; Norman, Eddie; Hodgson, Tony

2009-01-01

Discussion is often reported concerning potential links between computer-aided designing and creativity, but there is a lack of systematic enquiry to gather empirical evidence concerning such links. This paper reports an indication of findings from other research studies carried out in contexts beyond general education that have sought evidence…

Computer-Aided Drafting. Education for Technology Employment.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Dept. of Technology.

This computer-aided drafting (CAD) curriculum was developed to provide drafting instructors in Illinois with a useful guide for relating an important new technological advance to the vocational classroom. The competency-based learning activity guides are written to be used with any CAD system being used at the secondary and postsecondary levels.…

Computer-Aided Design in Further Education.

ERIC Educational Resources Information Center

Ingham, Peter, Ed.

This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

Use of Computer-Aided Tomography (CT) Imaging for Quantifying Coarse Roots, Rhizomes, Peat, and Particle Densities in Marsh Soils

EPA Science Inventory

Computer-aided Tomography (CT) imaging was utilized to quantify wet mass of coarse roots, rhizomes, and peat in cores collected from organic-rich (Jamaica Bay, NY) and mineral (North Inlet, SC) Spartina alterniflora soils. Calibration rods composed of materials with standard dens...

APPLICATION OF COMPUTER-AIDED TOMOGRAPHY TO VISUALIZE AND QUANTIFY BIOGENIC STRUCTURES IN MARINE SEDIMENTS

EPA Science Inventory

We used computer-aided tomography (CT) for 3D visualization and 2D analysis of

marine sediment cores from 3 stations (at 10, 75 and 118 m depths) with different environmental

impact. Biogenic structures such as tubes and burrows were quantified and compared among st...

EXTENSION OF COMPUTER-AIDED PROCESS ENGINEERING APPLICATIONS TO ENVIRONMENTAL LIFE CYCLE ASSESSMENT AND SUPPLY CHAIN MANAGEMENT

EPA Science Inventory

The potential of computer-aided process engineering (CAPE) tools to enable process engineers to improve the environmental performance of both their processes and across the life cycle (from cradle-to-grave) has long been proffered. However, this use of CAPE has not been fully ach...

Software Application for Computer Aided Vocabulary Learning in a Blended Learning Environment

ERIC Educational Resources Information Center

Essam, Rasha

2010-01-01

This study focuses on the effect of computer-aided vocabulary learning software called "ArabCAVL" on students' vocabulary acquisition. It was hypothesized that students who use the ArabCAVL software in blended learning environment will surpass students who use traditional vocabulary learning strategies in face-to-face learning…

Performance Measures in Courses Using Computer-Aided Personalized System of Instruction

ERIC Educational Resources Information Center

Springer, C. R.; Pear, J. J.

2008-01-01

Archived data from four courses taught with computer-aided personalized system of instruction (CAPSI)--an online, self-paced, instructional program--were used to explore the relationship between objectively rescored final exam grades, peer reviewing, and progress rate--i.e., the rate at which students completed unit tests. There was a strong…

Evaluation of computer-aided detection and diagnosis systems.

PubMed

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-08-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and "best practices" for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice.

Evaluation of computer-aided detection and diagnosis systemsa)

PubMed Central

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G.; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T.; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M.; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-01-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and “best practices” for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice. PMID:23927365

Risk and protective factors for bullying victimization among AIDS-affected and vulnerable children in South Africa.

PubMed

Cluver, Lucie; Bowes, Lucy; Gardner, Frances

2010-10-01

To examine whether bullying is a risk factor for psychological distress among children in poor, urban South Africa. To determine risk and protective factors for bullying victimization. One thousand and fifty children were interviewed in deprived neighborhoods, including orphans, AIDS-affected children, streetchildren, and child-headed households. Using standardized scales, children reported on bullying victimization, psychological problems, and potential risk and protective factors at individual, peer, family, and community levels. 34% of children reported bullying victimization. Bullied children showed higher levels of anxiety, depression, suicidal ideation, and post-traumatic stress, as well as higher levels of clinical-level disorder. Risk factors for being bullied were being a victim of physical or sexual abuse or domestic violence at home, living in a high-violence community, and experiencing AIDS-related stigma (independent of sociodemographic cofactors and child psychological disorder). Protective factors were sibling support and support from friends, although findings suggest that friendship groups may also be sources of bullying for AIDS-affected children. Bullying is an independent and important risk factor in child psychological distress in South Africa. Children victimized at home or in the community are more likely to be bullied, suggesting a cycle of violence. Those working with children in Southern Africa should be alert to risk of bullying, especially among abused or AIDS-affected children. Interventions combating community violence and AIDS-related stigma may have additional positive impacts on bullying, and promotion of peer and sibling support may reduce bullying victimization among high-risk children. Copyright © 2010 Elsevier Ltd. All rights reserved.

Vascular tissue engineering by computer-aided laser micromachining.

PubMed

Doraiswamy, Anand; Narayan, Roger J

2010-04-28

Many conventional technologies for fabricating tissue engineering scaffolds are not suitable for fabricating scaffolds with patient-specific attributes. For example, many conventional technologies for fabricating tissue engineering scaffolds do not provide control over overall scaffold geometry or over cell position within the scaffold. In this study, the use of computer-aided laser micromachining to create scaffolds for vascular tissue networks was investigated. Computer-aided laser micromachining was used to construct patterned surfaces in agarose or in silicon, which were used for differential adherence and growth of cells into vascular tissue networks. Concentric three-ring structures were fabricated on agarose hydrogel substrates, in which the inner ring contained human aortic endothelial cells, the middle ring contained HA587 human elastin and the outer ring contained human aortic vascular smooth muscle cells. Basement membrane matrix containing vascular endothelial growth factor and heparin was to promote proliferation of human aortic endothelial cells within the vascular tissue networks. Computer-aided laser micromachining provides a unique approach to fabricate small-diameter blood vessels for bypass surgery as well as other artificial tissues with complex geometries.

[Automated procedures for microscopic analyses of blood smears: medical testing a MECOS-Ts2 complex].

PubMed

Pliasunova, S A; Balugian, R Sh; Khmel'nitskiĭ, K E; Medovyĭ, V S; Parpara, A A; Piatnitskiĭ, A M; Sokolinskiĭ, B Z; Dem'ianov, V L; Nikolaenko, D S

2006-10-01

The paper presents the results of medical tests of a group of computer-aided procedures for microscopic analysis by means of a MECOS-Ts2 complex (ZAO "MECOS", Russia), which have been conducted at the Republican Children's Clinical Hospital, the Research Institute of Emergency Pediatric Surgery and Traumatology, and Moscow City Clinical Hospital No. 23. Computer-aided procedures for calculating the differential count and for analyzing the morphology of red blood cells were tested on blood smears from a total of 443 patients and donors, computer-aided calculation of the count of reticulocytes was tested on 318 smears. The tests were carried out under the US standard NCCLS-H20A. Manual microscopy (443 smears) and flow blood analysis on a Coulter GEN*S (125 smears) were used as reference methods. The quality of collection of samples and laboriousness were additionally assessed. The certified MECOS-Ts2 subsystems were additionally used as reference tools. The tests indicated the advantage of computer-aided MECOS-Tsl2 complex microscopy over manual microscopy.

[Three-dimensional computer aided design for individualized post-and-core restoration].

PubMed

Gu, Xiao-yu; Wang, Ya-ping; Wang, Yong; Lü, Pei-jun

2009-10-01

To develop a method of three-dimensional computer aided design (CAD) of post-and-core restoration. Two plaster casts with extracted natural teeth were used in this study. The extracted teeth were prepared and scanned using tomography method to obtain three-dimensional digitalized models. According to the basic rules of post-and-core design, posts, cores and cavity surfaces of the teeth were designed using the tools for processing point clouds, curves and surfaces on the forward engineering software of Tanglong prosthodontic system. Then three-dimensional figures of the final restorations were corrected according to the configurations of anterior teeth, premolars and molars respectively. Computer aided design of 14 post-and-core restorations were finished, and good fitness between the restoration and the three-dimensional digital models were obtained. Appropriate retention forms and enough spaces for the full crown restorations can be obtained through this method. The CAD of three-dimensional figures of the post-and-core restorations can fulfill clinical requirements. Therefore they can be used in computer-aided manufacture (CAM) of post-and-core restorations.

SAMO (Sistema de Apoyo Mechanizado a la Operacion): An operational aids computer system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stormer, T.D.; Laflor, E.V.

1989-01-01

SAMO (Sistema de Apoyo Mechanizado a la Operacion) is a sensor-driven, computer-based, graphic display system designed by Westinghouse to aid the A. N. Asco operations staff during all modes of plant operations, including emergencies. The SAMO system is being implemented in the A. N. Asco plant in two phases that coincide with consecutive refueling outages for each of two nuclear units at the Asco site. Phase 1 of the SAMO system implements the following functions: (1) emergency operational aids, (2) postaccident monitoring, (3) plant graphics display, (4) high-speed transient analysis recording, (5) historical data collection, storage, and retrieval, (6) sequencemore » of events, and (7) posttrip review. During phase 2 of the SAMO project, the current plant computer will be removed and the functions now performed by the plant computer will be performed by the SAMO system. In addition, the following functions will be implemented: (1) normal and simple transients operational aid, (2) plant information graphics; and (3) real-time radiological off-site dose calculation.« less

Estimation of the standardized risk difference and ratio in a competing risks framework: application to injection drug use and progression to AIDS after initiation of antiretroviral therapy.

PubMed

Cole, Stephen R; Lau, Bryan; Eron, Joseph J; Brookhart, M Alan; Kitahata, Mari M; Martin, Jeffrey N; Mathews, William C; Mugavero, Michael J

2015-02-15

There are few published examples of absolute risk estimated from epidemiologic data subject to censoring and competing risks with adjustment for multiple confounders. We present an example estimating the effect of injection drug use on 6-year risk of acquired immunodeficiency syndrome (AIDS) after initiation of combination antiretroviral therapy between 1998 and 2012 in an 8-site US cohort study with death before AIDS as a competing risk. We estimate the risk standardized to the total study sample by combining inverse probability weights with the cumulative incidence function; estimates of precision are obtained by bootstrap. In 7,182 patients (83% male, 33% African American, median age of 38 years), we observed 6-year standardized AIDS risks of 16.75% among 1,143 injection drug users and 12.08% among 6,039 nonusers, yielding a standardized risk difference of 4.68 (95% confidence interval: 1.27, 8.08) and a standardized risk ratio of 1.39 (95% confidence interval: 1.12, 1.72). Results may be sensitive to the assumptions of exposure-version irrelevance, no measurement bias, and no unmeasured confounding. These limitations suggest that results be replicated with refined measurements of injection drug use. Nevertheless, estimating the standardized risk difference and ratio is straightforward, and injection drug use appears to increase the risk of AIDS. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

An integrated simulation and optimization approach for managing human health risks of atmospheric pollutants by coal-fired power plants.

PubMed

Dai, C; Cai, X H; Cai, Y P; Guo, H C; Sun, W; Tan, Q; Huang, G H

2014-06-01

This research developed a simulation-aided nonlinear programming model (SNPM). This model incorporated the consideration of pollutant dispersion modeling, and the management of coal blending and the related human health risks within a general modeling framework In SNPM, the simulation effort (i.e., California puff [CALPUFF]) was used to forecast the fate of air pollutants for quantifying the health risk under various conditions, while the optimization studies were to identify the optimal coal blending strategies from a number of alternatives. To solve the model, a surrogate-based indirect search approach was proposed, where the support vector regression (SVR) was used to create a set of easy-to-use and rapid-response surrogates for identifying the function relationships between coal-blending operating conditions and health risks. Through replacing the CALPUFF and the corresponding hazard quotient equation with the surrogates, the computation efficiency could be improved. The developed SNPM was applied to minimize the human health risk associated with air pollutants discharged from Gaojing and Shijingshan power plants in the west of Beijing. Solution results indicated that it could be used for reducing the health risk of the public in the vicinity of the two power plants, identifying desired coal blending strategies for decision makers, and considering a proper balance between coal purchase cost and human health risk. A simulation-aided nonlinear programming model (SNPM) is developed. It integrates the advantages of CALPUFF and nonlinear programming model. To solve the model, a surrogate-based indirect search approach based on the combination of support vector regression and genetic algorithm is proposed. SNPM is applied to reduce the health risk caused by air pollutants discharged from Gaojing and Shijingshan power plants in the west of Beijing. Solution results indicate that it is useful for generating coal blending schemes, reducing the health risk of the public, reflecting the trade-offbetween coal purchase cost and health risk.

Contrast-enhanced ultrasonography for the detection of joint vascularity in arthritis--subjective grading versus computer-aided objective quantification.

PubMed

Klauser, A S; Franz, M; Bellmann Weiler, R; Gruber, J; Hartig, F; Mur, E; Wick, M C; Jaschke, W

2011-12-01

To compare joint inflammation assessment using subjective grading of power Doppler ultrasonography (PDUS) and contrast-enhanced ultrasonography (CEUS) versus computer-aided objective CEUS quantification. 37 joints of 28 patients with arthritis of different etiologies underwent B-mode ultrasonography, PDUS, and CEUS using a second-generation contrast agent. Synovial thickness, extent of vascularized pannus and intensity of vascularization were included in a 4-point PDUS and CEUS grading system. Subjective CEUS and PDUS scores were compared to computer-aided objective CEUS quantification using Qontrast® software for the calculation of the signal intensity (SI) and the ratio of SI for contrast enhancement. The interobserver agreement for subjective scoring was good to excellent (κ = 0.8 - 1.0; P < 0.0001). Computer-aided objective CEUS quantification correlated statistically significantly with subjective CEUS (P < 0.001) and PDUS grading (P < 0.05). The Qontrast® SI ratio correlated with subjective CEUS (P < 0.02) and PDUS grading (P < 0.03). Clinical activity did not correlate with vascularity or synovial thickening (P = N. S.) and no correlation between synovial thickening and vascularity extent could be found, neither using PDUS nor CEUS (P = N. S.). Both subjective CEUS grading and objective CEUS quantification are valuable for assessing joint vascularity in arthritis and computer-aided CEUS quantification may be a suitable objective tool for therapy follow-up in arthritis. © Georg Thieme Verlag KG Stuttgart · New York.

Online patient education and risk assessment: project OPERA from Cancerbackup. Putting inherited breast cancer risk information into context using argumentation theory.

PubMed

Mackay, James; Schulz, Peter; Rubinelli, Sara; Pithers, Andrea

2007-08-01

Many people are concerned about their family history of breast cancer, and are anxious about the possibility of developing breast cancer themselves. The majority of these people are likely not to be at significantly increased risk of developing inherited breast cancer. All women are at risk of developing sporadic breast cancer, and this risk increases with age. This project aims to aid people's understanding of these issues using an interactive online computer programme. The UK National Institute of Health and Clinical Excellence has published guidance for the National Health Service on the management of familial breast cancer. That guidance lays down clear criteria for categorising risk level and the appropriate management options. We have developed a user-friendly computer programme named OPERA (online patient education and risk assessment) which captures the individuality of the user's situation in a comprehensive way, and then produces personalised information packages, building on the theoretical framework of argumentation developed by Toulmin [Toulmin S. The uses of argument. Cambridge, MA: Cambridge University Press; 1958]. We will test this programme in a series of pilot studies commencing in 2007. This paper describes the progress of this project to date and focuses on the design of the programme. It is possible to construct a user friendly programme which delivers a personalised information package to individuals who are concerned about their risk of developing breast cancer. This user friendly programme needs to be tested within a series of carefully thought out pilot studies before it is ready for general release and use by the public.

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

Interventions to prevent HIV/AIDS among adolescents in less developed countries: are they effective?

PubMed

Magnussen, Lesley; Ehiri, John E; Ejere, Henry O D; Jolly, Pauline E

2004-01-01

The objective of this study was to summarize and critically assess the effects of interventions to prevent HIV/AIDS among adolescents in less developed countries. Reports of studies that evaluated interventions for preventing HIV/AIDS/STDs among persons aged 11-25 years were obtained from online computer databases, by searching conference proceedings and relevant journals, and by following up references cited in published reports. Studies were included if they investigated any educational, behavioral, psychosocial or other intervention that aimed to prevent or reduce HIV/AIDS/STD among persons aged 11-25 years in a less developed country. Only studies that included a control group, and which involved pre- and post-intervention assessments were included. Outcome measures included: (i) changes in safe sex practices (abstinence, condom use, limitation of sexual partners, avoidance of casual sex), (ii) knowledge about HIV/AIDS transmission and prevention methods, (iii) perception of HIV/AIDS/STD risks, (iv) self-efficacy with regard to condom negotiation and refusal of sex, (v) uptake of voluntary counseling and testing (VCT), and (vi) reduction in incidence of HIV/AIDS/STDs. Studies were assessed in terms of intervention format (e.g., education, role-play, video), duration, and setting (school or community). Reported improvements in outcome measures in intervention versus control groups were assessed. Sixteen studies met the inclusion criteria. Thirteen of these were conducted in Africa and three in Latin America. Twelve of the sixteen studies were school-based, and four were community-based. The interventions reviewed were not resoundingly successful in achieving their goals of increasing knowledge of HIV/AIDS, altering attitudes, improving negotiation and communication skills, or in influencing positive behavior evidenced through consistent condom use, abstinence, or reducing the number of partners. Considering the importance of HIV/AIDS prevention among adolescents, design of evaluation studies of programs in less developed countries need to be improved. The use of randomized controlled trials or other rigorous approaches for evaluating population-based behavioral interventions (e.g., Solomon Four design) is recommended.

Development of a patient decision aid for prevention of myocardial infarction in type 2 diabetes - rationale, design and pilot testing.

PubMed

Lenz, Matthias; Kasper, Jürgen; Mühlhauser, Ingrid

2009-10-19

Development and testing of a decision aid about prevention of myocardial infarction for persons with type 2 diabetes. Development and testing were guided by the UK Medical Research Council's guidance for the development and evaluation of complex interventions. This comprised a systematic literature review, a focus group of 9 potential providers, modelling a prototype, interviews to qualitatively explore understanding and additional information needs, and revision of the decision aid. The decision aid includes evidence-based information, a tool for individual risk-assessment, worksheets, and an action plan. Five diabetes educators and 15 patients underwent two 60-minutes face-to-face interviews, firstly browsing the decision aid for the first time and then after using it. Both groups differed in their ratings. Overall, the decision aid was rated to present essential information in a complex but understandable and unbiased manner. Difficulties involved understanding of terminology and risk interpretation. "Social status as a risk factor" was the most challenged content by educators but considered as highly important by patients. The risk assessment tool was used inadequately. 5 patients allocated themselves into false risk categories. After revision of the tool, all 12 patients who were recruited for reassessment used the tool correctly. The decision aid was evaluated with diabetes educators and patients. Qualitative data analysis revealed aspects for revision. The decision aid is planned to be part of a shared decision making programme, comprising a strategy for patient counselling and educational modules addressed to providers. Quantitative evaluation is required to assess its effectiveness.

What explains gender inequalities in HIV/AIDS prevalence in sub-Saharan Africa? Evidence from the demographic and health surveys.

PubMed

Sia, Drissa; Onadja, Yentéma; Hajizadeh, Mohammad; Heymann, S Jody; Brewer, Timothy F; Nandi, Arijit

2016-11-03

Women are disproportionally affected by human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) in sub-Saharan Africa (SSA). The determinants of gender inequality in HIV/AIDS may vary across countries and require country-specific interventions to address them. This study aimed to identify the socio-demographic and behavioral characteristics underlying gender inequalities in HIV/AIDS in 21 SSA countries. We applied an extension of the Blinder-Oaxaca decomposition approach to data from Demographic and Health Surveys and AIDS Indicator Surveys to quantify the differences in HIV/AIDS prevalence between women and men attributable to socio-demographic factors, sexual behaviours, and awareness of HIV/AIDS. We decomposed gender inequalities into two components: the percentage attributable to different levels of the risk factors between women and men (the "composition effect") and the percentage attributable to risk factors having differential effects on HIV/AIDS prevalence in women and men (the "response effect"). Descriptive analyses showed that the difference between women and men in HIV/AIDS prevalence varied from a low of 0.68 % (P = 0.008) in Liberia to a high of 11.5 % (P < 0.001) in Swaziland. The decomposition analysis showed that 84 % (P < 0.001) and 92 % (P < 0.001) of the higher prevalence of HIV/AIDS among women in Uganda and Ghana, respectively, was explained by the different distributions of HIV/AIDS risk factors, particularly age at first sex between women and men. In the majority of countries, however, observed gender inequalities in HIV/AIDS were chiefly explained by differences in the responses to risk factors; the differential effects of age, marital status and occupation on prevalence of HIV/AIDS for women and men were among the significant contributors to this component. In Cameroon, Guinea, Malawi and Swaziland, a combination of the composition and response effects explained gender inequalities in HIV/AIDS prevalence. The factors that explain gender inequality in HIV/AIDS in SSA vary by country, suggesting that country-specific interventions are needed. Unmeasured factors also contributed substantially to the difference in HIV/AIDS prevalence between women and men, highlighting the need for further study.

HIV/AIDS knowledge and occupational risk in primary care health workers from Chile

PubMed Central

Valdés, Baltica Cabieses; Lagunas, Lilian Ferrer; Villarroel, Luis Antonio; Acosta, Rosina Cianelli; Miner, Sarah; Silva, Margarita Bernales

2014-01-01

Objective To explore the relationship between knowledge level and occupational risk exposure to HIV/AIDS in primary care health workers. Methodology Analytical cross-sectional study. 720 health workers from Santiago answered a survey about HIV/AIDS that included: knowledge level (appropriate, inappropriate), occupational risk (with or without risk), and control variables (age, gender, health center, education and marital status). Descriptive and association analysis were performed. Odds Ratio (OR) was estimated through simple and multiple regressions logistics. Results 58.7% of the participants reported HIV occupational risk. 63.8% of the participants from the exposed group reported an appropriate level of knowledge, versus 36.1% of the non-exposed group (Adjusted OR of 3.1, IC95%OR: 2.0-4.8, p<0.0001). Technicians and cleaning staff reported a lower proportion of appropriate level of knowledge compared to the employees with college education (p<0.0001). Conclusion The level of HIV/AID occupational risk is directly associated with the level of knowledge of the disease. PMID:25284913

Computer-aided system for diabetes care in Berlin, G.D.R.

PubMed

Thoelke, H; Meusel, K; Ratzmann, K P

1990-01-01

In the Centre of Diabetes and Metabolic Disorders of Berlin, G.D.R., a computer-aided care system has been used since 1974, aiming at relieving physicians and medical staff from routine tasks and rendering possible epidemiological research on an unselected diabetes population of a defined area. The basis of the system is the data bank on diabetics (DB), where at present data from approximately 55,000 patients are stored. DB is used as a diabetes register of Berlin. On the basis of standardised criteria of diagnosis and therapy of diabetes mellitus in our dispensary care system, DB facilitates representative epidemiological analyses of the diabetic population, e.g. prevalence, incidence, duration of diabetes, and modes of treatment. The availability of general data on the population or the selection of specified groups of patients serves the management of the care system. Also, it supports the computer-aided recall of type II diabetics, treated either with diet alone or with diet and oral drugs. In this way, the standardised evaluation of treatment strategies in large populations of diabetics is possible on the basis of uniform metabolic criteria (blood glucose plus urinary glucose). The system consists of a main computer in the data processing unit and of personal computers in the diabetes centre which can be used either individually or as terminals to the main computer. During 14 years of experience, the computer-aided out-patient care of type II diabetics has proved efficient in a big-city area with a large population.

Development of a Cross-Flow Fan Rotor for Vertical Take-Off and Landing Aircraft

DTIC Science & Technology

2013-06-01

ANSYS CFX , along with the commercial computer-aided design software SolidWorks, was used to model and perform a parametric study on the number of rotor...the results found using ANSYS CFX . The experimental and analytical models were successfully compared at speeds ranging from 4,000 to 7,000 RPM...will make vertical take-off possible. The commercial computational fluid dynamics software ANSYS CFX , along with the commercial computer-aided design

Computer Aided Conceptual Design of Submarines

DTIC Science & Technology

1984-06-01

Department 5f i ngi eering . May 19134 Certified by: Thesi Supervisor Accepted Y.’.I Cr’rman, (IeaV gineer ing Departmental Comimitte C - nuusý"(Xwa has...the equilibrium polygon. The Package interfaces with a pressure hull design module developed separately in an O.E. thesis by Marvin Meade. Interactive...computers or computer aided design systems. c- A𔃺ccession -or4 Thesis Supervisor: Dr. David V. Burke NI R~ Title: Professor of Ocean Engineering DTIC

A Fully Distributed Approach to the Design of a KBIT/SEC VHF Packet Radio Network,

DTIC Science & Technology

1984-02-01

topological change and consequent out-modea routing data. Algorithm development has been aided by computer simulation using a finite state machine technique...development has been aided by computer simulation using a finite state machine technique to model a realistic network of up to fifty nodes. This is...use of computer based equipments in weapons systems and their associated sensors and command and control elements and the trend from voice to data

Improved Foundry Castings Utilizing CAD/CAM (Computer Aided Design/ Computer Aided Manufacture). Volume 1. Overview

DTIC Science & Technology

1988-06-30

casting. 68 Figure 1-9: Line printer representation of roll solidification. 69 Figure I1-1: Test casting model. 76 Figure 11-2: Division of test casting...writing new casting analysis and design routines. The new routines would take advantage of advanced criteria for predicting casting soundness and cast...properties and technical advances in computer hardware and software. 11 2. CONCLUSIONS UPCAST, a comprehensive software package, has been developed for

The Impact of Information on AIDS Risk Judgments and Behavioral Change among Young Adults.

ERIC Educational Resources Information Center

Dunwoody, Sharon; Neuwirth, Kurt

Participants in the debate on the media's role in the current AIDS (Acquired Immune Deficiency Syndrome) epidemic implicitly adopt a set of underlying assumptions about media processes and effects: information about AIDS proffered by the media has the capacity to influence estimates of risk, personal levels of concern, and extent of behavioral…

Reaching High-Risk Youth through Model AIDS Education Programs: A Case by Case Study.

ERIC Educational Resources Information Center

Center for Population Options, Washington, DC.

This report evaluates the High Risk Youth Demonstration Project, which is predicated on the idea that youth-serving agencies (YSAs) can be key sources for adolescent AIDS education. When the Center for Population Options (CPO) conceptualized a strategy for bringing AIDS education to underserved youth, it was responding to the following three areas…

AIDS: Is Any Risk Too Great? The 1987 Perspective.

ERIC Educational Resources Information Center

Hartog-Rapp, Fay

This report discusses public school legal liability in the Acquired Immune Deficiency Syndrome (AIDS) controversy with regard to the right of privacy of AIDS victims who are students and employees and the concern of risk of contagion to other students and employees and the public's right to know what is going on in their schools. Several steps…

Gambling with Your Health: Predictors of Risk for AIDS.

ERIC Educational Resources Information Center

Lasorsa, Dominic L.; Shoemaker, Pamela J.

To examine risk for Acquired Immune Deficiency Syndrome (AIDS) in terms of risk-related behaviors, and to investigate the factors that may be involved in putting one at risk, a study conducted telephone interviews with 493 randomly selected adults (18 years or older) in Austin, Texas in the fall of 1987. Respondents answered approximately 40…

Computer-aided drug discovery research at a global contract research organization

NASA Astrophysics Data System (ADS)

Kitchen, Douglas B.

2017-03-01

Computer-aided drug discovery started at Albany Molecular Research, Inc in 1997. Over nearly 20 years the role of cheminformatics and computational chemistry has grown throughout the pharmaceutical industry and at AMRI. This paper will describe the infrastructure and roles of CADD throughout drug discovery and some of the lessons learned regarding the success of several methods. Various contributions provided by computational chemistry and cheminformatics in chemical library design, hit triage, hit-to-lead and lead optimization are discussed. Some frequently used computational chemistry techniques are described. The ways in which they may contribute to discovery projects are presented based on a few examples from recent publications.

Computer-aided drug discovery research at a global contract research organization.

PubMed

Kitchen, Douglas B

2017-03-01

Computer-aided drug discovery started at Albany Molecular Research, Inc in 1997. Over nearly 20 years the role of cheminformatics and computational chemistry has grown throughout the pharmaceutical industry and at AMRI. This paper will describe the infrastructure and roles of CADD throughout drug discovery and some of the lessons learned regarding the success of several methods. Various contributions provided by computational chemistry and cheminformatics in chemical library design, hit triage, hit-to-lead and lead optimization are discussed. Some frequently used computational chemistry techniques are described. The ways in which they may contribute to discovery projects are presented based on a few examples from recent publications.

23 CFR 771.117 - Categorical exclusions.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., computer-aided dispatching systems, radio communications systems, dynamic message signs, and security... effects can be assessed; and Federal-aid system revisions which establish classes of highways on the Federal-aid highway system. (2) Approval of utility installations along or across a transportation...

The application of rapid prototyping technique in chin augmentation.

PubMed

Li, Min; Lin, Xin; Xu, Yongchen

2010-04-01

This article discusses the application of computer-aided design and rapid prototyping techniques in prosthetic chin augmentation for mild microgenia. Nine cases of mild microgenia underwent an electrobeam computer tomography scan. Then we performed three-dimensional reconstruction and operative design using computer software. According to the design, we determined the shape and size of the prostheses and made an individualized prosthesis for each chin augmentation with the rapid prototyping technique. With the application of computer-aided design and a rapid prototyping technique, we could determine the shape, size, and embedding location accurately. Prefabricating the individual prosthesis model is useful in improving the accuracy of treatment. In the nine cases of mild microgenia, three received a silicone implant, four received an ePTFE implant, and two received a Medpor implant. All patients were satisfied with the results. During follow-up at 6-12 months, all patients remained satisfied. The application of computer-aided design and rapid prototyping techniques can offer surgeons the ability to design an individualized ideal prosthesis for each patient.

Computer-Assisted Digital Image Analysis of Plus Disease in Retinopathy of Prematurity.

PubMed

Kemp, Pavlina S; VanderVeen, Deborah K

2016-01-01

The objective of this study is to review the current state and role of computer-assisted analysis in diagnosis of plus disease in retinopathy of prematurity. Diagnosis and documentation of retinopathy of prematurity are increasingly being supplemented by digital imaging. The incorporation of computer-aided techniques has the potential to add valuable information and standardization regarding the presence of plus disease, an important criterion in deciding the necessity of treatment of vision-threatening retinopathy of prematurity. A review of literature found that several techniques have been published examining the process and role of computer aided analysis of plus disease in retinopathy of prematurity. These techniques use semiautomated image analysis techniques to evaluate retinal vascular dilation and tortuosity, using calculated parameters to evaluate presence or absence of plus disease. These values are then compared with expert consensus. The study concludes that computer-aided image analysis has the potential to use quantitative and objective criteria to act as a supplemental tool in evaluating for plus disease in the setting of retinopathy of prematurity.

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Computer-Aided Diagnosis of Breast Cancer: A Multi-Center Demonstrator

DTIC Science & Technology

1998-10-01

Artificial Neural Network (ANN) approach to computer aided diagnosis of breast cancer from mammographic findings. An ANN has been developed to provide support for the clinical decision to perform breast biopsy. The system is designed to aid in the decision to biopsy those patients who have suspicious mammographic findings. The decision to biopsy can be viewed as a two stage process: 1)the mammographer views the mammogram and determines the presence or absence of image features such as calcifications and masses, 2) the presence and description of these features

Computer-Aided Recognition of Facial Attributes for Fetal Alcohol Spectrum Disorders.

PubMed

Valentine, Matthew; Bihm, Dustin C J; Wolf, Lior; Hoyme, H Eugene; May, Philip A; Buckley, David; Kalberg, Wendy; Abdul-Rahman, Omar A

2017-12-01

To compare the detection of facial attributes by computer-based facial recognition software of 2-D images against standard, manual examination in fetal alcohol spectrum disorders (FASD). Participants were gathered from the Fetal Alcohol Syndrome Epidemiology Research database. Standard frontal and oblique photographs of children were obtained during a manual, in-person dysmorphology assessment. Images were submitted for facial analysis conducted by the facial dysmorphology novel analysis technology (an automated system), which assesses ratios of measurements between various facial landmarks to determine the presence of dysmorphic features. Manual blinded dysmorphology assessments were compared with those obtained via the computer-aided system. Areas under the curve values for individual receiver-operating characteristic curves revealed the computer-aided system (0.88 ± 0.02) to be comparable to the manual method (0.86 ± 0.03) in detecting patients with FASD. Interestingly, cases of alcohol-related neurodevelopmental disorder (ARND) were identified more efficiently by the computer-aided system (0.84 ± 0.07) in comparison to the manual method (0.74 ± 0.04). A facial gestalt analysis of patients with ARND also identified more generalized facial findings compared to the cardinal facial features seen in more severe forms of FASD. We found there was an increased diagnostic accuracy for ARND via our computer-aided method. As this category has been historically difficult to diagnose, we believe our experiment demonstrates that facial dysmorphology novel analysis technology can potentially improve ARND diagnosis by introducing a standardized metric for recognizing FASD-associated facial anomalies. Earlier recognition of these patients will lead to earlier intervention with improved patient outcomes. Copyright © 2017 by the American Academy of Pediatrics.

Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning.

PubMed

Mazzoni, Simona; Bianchi, Alberto; Schiariti, Giulio; Badiali, Giovanni; Marchetti, Claudio

2015-04-01

The purpose of the present study was to develop a computer-aided design (CAD) and computer-aided manufacturing (CAM) technique that enabled fabrication of surgical cutting guides and titanium fixation plates that would allow the upper maxilla to be repositioned correctly without a surgical splint in orthognathic patients. Ten patients were recruited. A complete CAD-CAM workflow for orthognathic surgery has 3 steps: 1) virtual planning of the surgical treatment, 2) CAD-CAM and 3-dimensional printing of customized surgical devices (surgical cutting guide and titanium fixation plates), and 3) computer-aided surgery. Upper maxilla repositioning was performed in a waferless manner using a CAD-CAM device: the surgical cutting guide was used during surgery to pilot the osteotomy line that had been planned preoperatively at the computer and the custom-made fixation titanium plates allowed desired repositioning of the maxilla. To evaluate the reproducibility of this CAD-CAM orthognathic surgical method, the virtually planned and actually achieved positions of the upper maxilla were compared. Overlap errors using a threshold value smaller than 2 mm were evaluated, and the frequency of such errors was used as a measurement of accuracy. By this definition, the accuracy was 100% in 7 patients (range in all patients, 62 to 100%; median, 92.7%). These results tend to confirm that the use of CAD-CAM cutting guides and customized titanium plates for upper maxilla repositioning represents a promising method for the accurate reproduction of preoperative virtual planning without the use of surgical splints. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Correction of Pectus Excavatum by Custom-Made Silicone Implants: Contribution of Computer-Aided Design Reconstruction. A 20-Year Experience and 401 Cases.

PubMed

Chavoin, Jean-Pierre; Grolleau, Jean-Louis; Moreno, Benjamin; Brunello, Jérémie; André, Aymeric; Dahan, Marcel; Garrido, Ignacio; Chaput, Benoit

2016-05-01

In the absence of demonstrable functional impairment, pectus excavatum is merely a congenital deformity, albeit with a marked psychological impact. Many patients do not wish to undergo thoracic remodeling operations, which are invasive and do not clearly result in respiratory or cardiac improvement. From 1993 to 2015, the authors designed 401 custom-made silicone implants to treat funnel chests. Before 2007, implants were made from plaster chest molds. Beginning in 2007, three-dimensional reconstructions were made from computed tomographic scans by computer-aided design. The authors prospectively recorded all assessments and follow-up data since 1993. Preoperative and postoperative photographs of two random groups of 50 patients were analyzed, in a blinded manner, by two surgeons independently. Intraoperative and postoperative complications, clinical outcomes, patient satisfaction, and quality of life were evaluated. One infection and three hematomas were recorded. Periprosthetic seroma was evident in all cases. Patients rated the cosmetic outcomes of computer-aided design implants significantly higher than those of the earlier implants made using plaster molds (p = 0.030). Malformations were better corrected in the computer-aided design group (86 percent) than in the plaster group (72 percent) (p = 0.038). Patient satisfaction was higher in the former group (p = 0.011). Medical Outcomes Study 36-Item Short-Form Health Survey scores revealed significant improvements, both socially and emotionally. Correction of pectus excavatum using a computer-aided design silicone implant fulfils aesthetic and psychological demands. The technique is simple and reliable and yields high-quality results. In the medium term, the approach may render invasive techniques obsolete. These operations remain risky and of doubtful functional utility. Therapeutic, III.

Listening to Our Patients: Learning About Suicide Risk and Protective Factors From Veterans With HIV/AIDS.

PubMed

Signoracci, Gina M; Stearns-Yoder, Kelly A; Holliman, Brooke Dorsey; Huggins, Joseph A; Janoff, Edward N; Brenner, Lisa A

2016-12-01

We sought to gather perspectives of veterans with human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS) regarding suicide risk factors, warning signs, and protective factors. We also aimed to modify an existing Veterans Health Administration tool, the Suicide Risk Assessment Guide Pocket Card, for HIV/AIDS provider use. Twenty male veterans participated in audio-recorded semistructured interviews that were transcribed and coded for themes. Veterans highlighted personally relevant psychosocial stressors (i.e., poverty, social isolation and loneliness, and physical health). Although the concept of warning signs did not seem salient to participants, they named indicators of elevated imminent risk for self-directed violence (i.e., "relapse," "not take'n medications," and "miss'n appointments") and few protective factors. No themes emerged regarding recommended pocket card changes. This sample of veterans identified self-directed violence risks noted in the general population and others with HIV/AIDS, as well as proximal events associated with increased risk. Care providers are encouraged to explore the relevance of noted imminent and persistent indicators of increased risk with veterans seeking care. © The Author(s) 2015.

AIDS related attitudes and sexual practices of the Jakarta WARIA (male transvestites).

PubMed

Lubis, I; Master, J; Bambang, M; Papilaya, A; Anthony, R L

1994-03-01

As part of a community based educational campaign to convey the risk of HIV infection and AIDS to commercial sex workers in Jakarta, over 600 male transvestites (WARIA) were questioned about their sexual behavior patterns and their knowledge and attitude towards HIV infection and AIDS. Most expressed a genuine fear about AIDS, but they stated they did not have sufficient information to determine if their risk of infection, at this time, was great enough to command a change in their sexual conduct. Among the group who felt they were not at risk for HIV infection, 40% had 8 or more different sex partners per week. Low risk receptive oral sex, thigh massage (simulated vaginal sex) and masturbation of the client were routine activities but high risk receptive anal sex without condoms was most common. Despite such high risk behavior, the WARIA community remains free of HIV infections. However, if they refuse to accept the endorsement of their peer leaders and they fail to alter their sexual behavior because of an unawareness of their risk, that status will change soon.

Persons with Alzheimer's Disease Make Phone Calls Independently Using a Computer-Aided Telephone System

ERIC Educational Resources Information Center

Perilli, Viviana; Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Cordiano, Noemi; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

2012-01-01

This study assessed whether four patients with a diagnosis of Alzheimer's disease could make independent phone calls via a computer-aided telephone system. The study was carried out according to a non-concurrent multiple baseline design across participants. All participants started with baseline during which the telephone system was not available,…

Effect of Computer-Aided Instruction on Attitude and Achievement of Fifth Grade Math Students

ERIC Educational Resources Information Center

Shoemaker, Traci L.

2013-01-01

The purpose of this quasi-experimental non-equivalent control group study was to test theories of constructivism and motivation, along with research-based teaching practices of differentiating instruction and instructing within a child's Zone of Proximal Development, in measuring the effect of computer-aided instruction on fifth grade students'…

A Multidisciplinary Research Team Approach to Computer-Aided Drafting (CAD) System Selection. Final Report.

ERIC Educational Resources Information Center

Franken, Ken; And Others

A multidisciplinary research team was assembled to review existing computer-aided drafting (CAD) systems for the purpose of enabling staff in the Design Drafting Department at Linn Technical College (Missouri) to select the best system out of the many CAD systems in existence. During the initial stage of the evaluation project, researchers…

Applications of computer-aided text analysis in natural resources.

Treesearch

David N. Bengston

2000-01-01

Ten contributed papers describe the use of a variety of approaches to computer-aided text analysis and their application to a wide range of research questions related to natural resources and the environment. Taken together, these papers paint a picture of a growing and vital area of research on the human dimensions of natural resource management.

Facilitating Integration of Electron Beam Lithography Devices with Interactive Videodisc, Computer-Based Simulation and Job Aids.

ERIC Educational Resources Information Center

Von Der Linn, Robert Christopher

A needs assessment of the Grumman E-Beam Systems Group identified the requirement for additional skill mastery for the engineers who assemble, integrate, and maintain devices used to manufacture integrated circuits. Further analysis of the tasks involved led to the decision to develop interactive videodisc, computer-based job aids to enable…

Information Infrastructures for Integrated Enterprises

DTIC Science & Technology

1993-05-01

PROCESSING demographic CAM realization; ule leveling; studies; prelimi- rapid tooling; con- accounting/admin- nary CAFE and tinuous cost istrative reports...nies might consider franchising some facets of indirect labor, such as selected functions of administration, finance, and human resources. Incorporate as...vices CAFE Corporate Average Fuel Economy CAD Computer-Aided Design 0 CAE Computer-Aided Engineering CAIS Common Ada Programming Support Environment

The Effectiveness of Computer-Aid, Self-Instructional Programs in Dental Education: A Systematic Review of the Literature.

ERIC Educational Resources Information Center

Rosenberg, Harold; Grad, Helen A.; Matear, David W.

2003-01-01

Performed a systematic review of the published literature comparing computer-aided learning (CAL) with other teaching methods in dental education. Concluded that CAL is as effective as other methods of teaching and can be used as an adjunct to traditional education or as a means of self-instruction. (EV)

Virtual Reality-Based Technologies in Dental Medicine: Knowledge, Attitudes and Practice among Students and Practitioners

ERIC Educational Resources Information Center

Sabalic, Maja; Schoener, Jason D.

2017-01-01

Virtual reality-based technologies have been used in dentistry for almost two decades. Dental simulators, planning software and CAD/CAM (computer-aided design/computer-aided manufacturing) systems have significantly developed over the years and changed both dental education and clinical practice. This study aimed to assess the knowledge, attitudes…

Mixed-Initiative Information System for Computer-Aided Training and Decision Making. Final Report.

ERIC Educational Resources Information Center

Grignetti, Mario C.; Warnock, Eleanor H.

A description of the NET-SCHOLAR system, an on-line aid for naive users of the Advanced Research Projects Administration (ARPA) Computer Network, is provided. The discussion focuses upon the system's representation and handling of functional and procedural information and its ability to deal with action verbs, all within the context of the ARPA…

Design, Development, Implementation, and Evaluation of the Computer Aided Interactive Testing System (CAITS). Focus on the Trained Person.

ERIC Educational Resources Information Center

1983

This report describes the design, development, implementation, and evaluation of the Computer Aided Interactive Testing System (CAITS) and addresses the applicability of the system in the Naval Education and Training Command. In addition to an introduction (section one), the report contains four sections and three appendices. Section two describes…

Revision of Electro-Mechanical Drafting Program to Include CAD/D (Computer-Aided Drafting/Design). Final Report.

ERIC Educational Resources Information Center

Snyder, Nancy V.

North Seattle Community College decided to integrate computer-aided design/drafting (CAD/D) into its Electro-Mechanical Drafting Program. This choice necessitated a redefinition of the program through new curriculum and course development. To initiate the project, a new industrial advisory council was formed. Major electronic and recruiting firms…

Implementing Computer-Aided Instruction in Distance Education: An Infrastructure. RR/89-06.

ERIC Educational Resources Information Center

Kotze, Paula

The infrastructure required for the implementation of computer aided instruction is described with particular reference to the distance education environment at the University of South Africa. A review of the state of the art of online distance education in the United States and Europe is followed by an outline of the proposed infrastructure for…

Functional Specifications for Computer Aided Training Systems Development and Management (CATSDM) Support Functions. Final Report.

ERIC Educational Resources Information Center

Hughes, John; And Others

This report provides a description of a Computer Aided Training System Development and Management (CATSDM) environment based on state-of-the-art hardware and software technology, and including recommendations for off the shelf systems to be utilized as a starting point in addressing the particular systematic training and instruction design and…

A Complete Interactive Graphical Computer-Aided Instruction System.

ERIC Educational Resources Information Center

Abrams, Steven Selby

The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

Caesy: A software tool for computer-aided engineering

NASA Technical Reports Server (NTRS)

Wette, Matt

1993-01-01

A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

The Effects of Cooperative and Individualistic Learning Structures on Achievement in a College-Level Computer-Aided Drafting Course

ERIC Educational Resources Information Center

Swab, A. Geoffrey

2012-01-01

This study of cooperative learning in post-secondary engineering education investigated achievement of engineering students enrolled in two intact sections of a computer-aided drafting (CAD) course. Quasi-experimental and qualitative methods were employed in comparing student achievement resulting from out-of-class cooperative and individualistic…

A Design Science Research Methodology for Developing a Computer-Aided Assessment Approach Using Method Marking Concept

ERIC Educational Resources Information Center

Genemo, Hussein; Miah, Shah Jahan; McAndrew, Alasdair

2016-01-01

Assessment has been defined as an authentic method that plays an important role in evaluating students' learning attitude in acquiring lifelong knowledge. Traditional methods of assessment including the Computer-Aided Assessment (CAA) for mathematics show limited ability to assess students' full work unless multi-step questions are sub-divided…

[Research and application of computer-aided technology in restoration of maxillary defect].

PubMed

Cheng, Xiaosheng; Liao, Wenhe; Hu, Qingang; Wang, Qian; Dai, Ning

2008-08-01

This paper presents a new method of designing restoration model of maxillectomy defect through Computer aided technology. Firstly, 3D maxillectomy triangle mesh model is constructed from Helical CT data. Secondly, the triangle mesh model is transformed into initial computer-aided design (CAD) model of maxillectomy through reverse engineering software. Thirdly, the 3D virtual restoration model of maxillary defect is obtained after designing and adjusting the initial CAD model through CAD software according to the patient's practical condition. Therefore, the 3D virtual restoration can be fitted very well with the broken part of maxilla. The exported design data can be manufactured using rapid prototyping technology and foundry technology. Finally, the result proved that this method is effective and feasible.

Integrated computer-aided design using minicomputers

NASA Technical Reports Server (NTRS)

Storaasli, O. O.

1980-01-01

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

Computer-aided design of antenna structures and components

NASA Technical Reports Server (NTRS)

Levy, R.

1976-01-01

This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

Implementation of Audio Computer-Assisted Interviewing Software in HIV/AIDS Research

PubMed Central

Pluhar, Erika; Yeager, Katherine A.; Corkran, Carol; McCarty, Frances; Holstad, Marcia McDonnell; Denzmore-Nwagbara, Pamela; Fielder, Bridget; DiIorio, Colleen

2007-01-01

Computer assisted interviewing (CAI) has begun to play a more prominent role in HIV/AIDS prevention research. Despite the increased popularity of CAI, particularly audio computer assisted self-interviewing (ACASI), some research teams are still reluctant to implement ACASI technology due to lack of familiarity with the practical issues related to using these software packages. The purpose of this paper is to describe the implementation of one particular ACASI software package, the Questionnaire Development System™ (QDS™), in several nursing and HIV/AIDS prevention research settings. We present acceptability and satisfaction data from two large-scale public health studies in which we have used QDS with diverse populations. We also address issues related to developing and programming a questionnaire, discuss practical strategies related to planning for and implementing ACASI in the field, including selecting equipment, training staff, and collecting and transferring data, and summarize advantages and disadvantages of computer assisted research methods. PMID:17662924

Techniques for computer-aided analysis of ERTS-1 data, useful in geologic, forest and water resource surveys. [Colorado Rocky Mountains

NASA Technical Reports Server (NTRS)

Hoffer, R. M.

1974-01-01

Forestry, geology, and water resource applications were the focus of this study, which involved the use of computer-implemented pattern-recognition techniques to analyze ERTS-1 data. The results have proven the value of computer-aided analysis techniques, even in areas of mountainous terrain. Several analysis capabilities have been developed during these ERTS-1 investigations. A procedure to rotate, deskew, and geometrically scale the MSS data results in 1:24,000 scale printouts that can be directly overlayed on 7 1/2 minutes U.S.G.S. topographic maps. Several scales of computer-enhanced "false color-infrared" composites of MSS data can be obtained from a digital display unit, and emphasize the tremendous detail present in the ERTS-1 data. A grid can also be superimposed on the displayed data to aid in specifying areas of interest.

On the convergence of nanotechnology and Big Data analysis for computer-aided diagnosis.

PubMed

Rodrigues, Jose F; Paulovich, Fernando V; de Oliveira, Maria Cf; de Oliveira, Osvaldo N

2016-04-01

An overview is provided of the challenges involved in building computer-aided diagnosis systems capable of precise medical diagnostics based on integration and interpretation of data from different sources and formats. The availability of massive amounts of data and computational methods associated with the Big Data paradigm has brought hope that such systems may soon be available in routine clinical practices, which is not the case today. We focus on visual and machine learning analysis of medical data acquired with varied nanotech-based techniques and on methods for Big Data infrastructure. Because diagnosis is essentially a classification task, we address the machine learning techniques with supervised and unsupervised classification, making a critical assessment of the progress already made in the medical field and the prospects for the near future. We also advocate that successful computer-aided diagnosis requires a merge of methods and concepts from nanotechnology and Big Data analysis.

Modeling And Simulation Of Bar Code Scanners Using Computer Aided Design Software

NASA Astrophysics Data System (ADS)

Hellekson, Ron; Campbell, Scott

1988-06-01

Many optical systems have demanding requirements to package the system in a small 3 dimensional space. The use of computer graphic tools can be a tremendous aid to the designer in analyzing the optical problems created by smaller and less costly systems. The Spectra Physics grocery store bar code scanner employs an especially complex 3 dimensional scan pattern to read bar code labels. By using a specially written program which interfaces with a computer aided design system, we have simulated many of the functions of this complex optical system. In this paper we will illustrate how a recent version of the scanner has been designed. We will discuss the use of computer graphics in the design process including interactive tweaking of the scan pattern, analysis of collected light, analysis of the scan pattern density, and analysis of the manufacturing tolerances used to build the scanner.

Psychological Issues in Online Adaptive Task Allocation

NASA Technical Reports Server (NTRS)

Morris, N. M.; Rouse, W. B.; Ward, S. L.; Frey, P. R.

1984-01-01

Adaptive aiding is an idea that offers potential for improvement over many current approaches to aiding in human-computer systems. The expected return of tailoring the system to fit the user could be in the form of improved system performance and/or increased user satisfaction. Issues such as the manner in which information is shared between human and computer, the appropriate division of labor between them, and the level of autonomy of the aid are explored. A simulated visual search task was developed. Subjects are required to identify targets in a moving display while performing a compensatory sub-critical tracking task. By manipulating characteristics of the situation such as imposed task-related workload and effort required to communicate with the computer, it is possible to create conditions in which interaction with the computer would be more or less desirable. The results of preliminary research using this experimental scenario are presented, and future directions for this research effort are discussed.

Soil, water, and vegetation conditions in south Texas

NASA Technical Reports Server (NTRS)

Wiegand, C. L.; Gausman, H. W.; Leamer, R. W.; Richardson, A. J.; Everitt, J. H.; Gerbermann, A. H. (Principal Investigator)

1976-01-01

The author has identified the following significant results. Software development for a computer-aided crop and soil survey system is nearing completion. Computer-aided variety classification accuracies using LANDSAT-1 MSS data for a 600 hectare citrus farm were 83% for Redblush grapefruit and 91% for oranges. These accuracies indicate that there is good potential for computer-aided inventories of grapefruit and orange citrus orchards with LANDSAT-type MSS data. Mean digital values of clouds differed statistically from those for crop, soil, and water entities, and those for cloud shadows were enough lower than sunlit crop and soil to be distinguishable. The standard errors of estimate for the calibration of computer compatible tape coordinate system (pixel and record) to earth coordinate system (longitude and latitude) for 6 LANDSAT scenes ranged from 0.72 to 1.50 pixels and from 0.58 to 1.75 records.

Predicting survival in AIDS: refining the model.

PubMed

Hutchinson, S J; Brettle, R P; Gore, S M

1997-11-01

We tested the validity of a previously-published AIDS staging system by examining AIDS-defining diseases (ADDs) and CD4 counts as prognostic factors for survival of the 248 AIDS patients in the Edinburgh City Hospital Cohort, of whom 56% were injecting drug-users (IDUs). Cox regression was used to model the proportionality of risk of death as the CD4 count declined and more ADDs were experienced, and dependence upon post-AIDS treatment. Using the system of Mocroft et al. (Lancet 1995; 346:12-17) to grade severity, our data were well enough modelled, but we suggest: (i) regrading of HIV dementia (RR 3.9, 95% CI 2.5-6.0), mainly attributed to the drug users, to a very severe ADD; (ii) reduction in risk from zidovudine (RR 0.7, 95% CI 0.5-1.0) during AIDS follow-up for patients starting treatment at or after AIDS diagnosis; (iii) improved management of first mild ADDs (from 1987-89 to 1994-95: 40% reduction in IDUs appearing with mild index diseases, and an approximate three-fold reduction in risk associated with a mild ADD). This study supports previous findings on the significance of ADDs and lowest CD4 count in predicting the lifetime of AIDS patients.

Creating an Electronic Reference and Information Database for Computer-aided ECM Design

NASA Astrophysics Data System (ADS)

Nekhoroshev, M. V.; Pronichev, N. D.; Smirnov, G. V.

2018-01-01

The paper presents a review on electrochemical shaping. An algorithm has been developed to implement a computer shaping model applicable to pulse electrochemical machining. For that purpose, the characteristics of pulse current occurring in electrochemical machining of aviation materials have been studied. Based on integrating the experimental results and comprehensive electrochemical machining process data modeling, a subsystem for computer-aided design of electrochemical machining for gas turbine engine blades has been developed; the subsystem was implemented in the Teamcenter PLM system.

Intelligent Computer-Aided Instruction for Medical Diagnosis

PubMed Central

Clancey, William J.; Shortliffe, Edward H.; Buchanan, Bruce G.

1979-01-01

An intelligent computer-aided instruction (ICAI) program, named GUIDON, has been developed for teaching infectious disease diagnosis.* ICAI programs use artificial intelligence techniques for representing both subject material and teaching strategies. This paper briefly outlines the difference between traditional instructional programs and ICAI. We then illustrate how GUIDON makes contributions in areas important to medical CAI: interacting with the student in a mixed-initiative dialogue (including the problems of feedback and realism), teaching problem-solving strategies, and assembling a computer-based curriculum.

Vulnerability and risk perception in the management of HIV/AIDS: Public priorities in a global pandemic

PubMed Central

Tsasis, Peter; Nirupama, N.

2008-01-01

Understanding the way perception of risk is shaped and constructed is crucial in understanding why it has been so difficult to mitigate the spread of HIV/AIDS. This paper uses the Pressure and Release (PAR) model, used to predict the onset of natural disasters as the conceptual framework. It substitutes vulnerability and risk perception as the trigger factors in the model, in making the case that HIV/AIDS can be characterized as a slow onset disaster. The implications are that vulnerability must be managed and reduced by addressing root causes, dynamic pressures, and unsafe conditions that contribute to the HIV/AIDS pandemic. HIV/AIDS programs must be culturally appropriate and work toward influencing risk perception, while addressing social norms and values that negatively impact vulnerable populations. By impacting cultural and social expectations, individuals will be able to more readily adopt safer sex behaviors. The development of policies and programs addressing the issues in context, as opposed to individual behaviors alone, allows for effective public health intervention. This may have implications for public health measures implemented for combating the spread of HIV/AIDS. PMID:22312198

Computer-Aided Design/Computer-Assisted Manufacture Monolithic Restorations for Severely Worn Dentition: A Case History Report.

PubMed

Abou-Ayash, Samir; Boldt, Johannes; Vuck, Alexander

Full-arch rehabilitation of patients with severe tooth wear due to parafunctional behavior is a challenge for dentists and dental technicians, especially when a highly esthetic outcome is desired. A variety of different treatment options and prosthetic materials are available for such a clinical undertaking. The ongoing progress of computer-aided design/computer-assisted manufacture technologies in combination with all-ceramic materials provides a predictable workflow for these complex cases. This case history report describes a comprehensive, step-by-step treatment protocol leading to an optimally predictable treatment outcome for an esthetically compromised patient.

Computer-Assisted Virtual Planning for Surgical Guide Manufacturing and Internal Distractor Adaptation in the Management of Midface Hypoplasia in Cleft Patients.

PubMed

Scolozzi, Paolo; Herzog, Georges

2017-07-01

We are reporting the treatment of severe maxillary hypoplasia in two patients with unilateral cleft lip and palate by using a specific approach combining the Le Fort I distraction osteogenesis technique coupled with computer-aided design/computer-aided manufacturing customized surgical guides and internal distractors based on virtual computational planning. This technology allows for the transfer of the virtual planned reconstruction to the operating room by using custom patient-specific implants, surgical splints, surgical cutting guides, and surgical guides to plate or distractor adaptation.

Determinants of Progression to AIDS and Death Following HIV Diagnosis: A Retrospective Cohort Study in Wuhan, China

PubMed Central

Jiang, Hongbo; Xie, Nianhua; Cao, Beibei; Tan, Li; Fan, Yunzhou; Zhang, Fan; Yao, Zhongzhao; Liu, Li; Nie, Shaofa

2013-01-01

Objective To identify determinants associated with disease progression and death following human immunodeficiency virus (HIV) diagnosis. Methods Disease progression data from the diagnosis of HIV infection or acquiring immunodeficiency syndrome (AIDS) to February 29, 2012 were retrospectively collected from the national surveillance system databases and the national treatment database in Wuhan, China. Kaplan-Meier method, Logistic regression and Cox proportional hazards model were applied to identify the related factors of progression to AIDS or death following HIV diagnosis. Results By the end of February 2012, 181 of 691 HIV infectors developed to AIDS, and 129 of 470 AIDS patients died among whom 289 cases received concurrent HIV/AIDS diagnosis. Compared with men infected through homosexual behavior, injection drug users possessed sharply decreased hazard ratio (HR) for progression to AIDS following HIV diagnosis [HR = 0.31, 95% confidence interval (CI), 0.18–0.54, P = 4.01×10−5]. HIV infectors at least 60 years presented 1.15-fold (HR = 2.15, 95% CI, 1.15–4.03, P = 0.017) increased risk to develop AIDS when compared with those aged 17–29 years. Similarly, AIDS patients with diagnosis ages between 50 and 59 years were at a 1.60-fold higher risk of death (HR = 2.60, 95% CI, 1.18–5.72, P = 0.017) compared to those aged 19–29 years. AIDS patients with more CD4+ T-cells within 6 months at diagnosis (cell/µL) presented lower risk of death (HR = 0.29 for 50- vs <50, 95% CI, 0.15–0.59, P = 0.001). The highly active antiretroviral therapy (HAART) delayed progression to AIDS from HIV diagnosis (HR = 0.15, 95% CI, 0.07–0.34, P = 6.46×10−6) and reduced the risk of death after AIDS diagnosis (HR = 0.02, 95% CI, 0.01–0.04, P = 7.25×10−25). Conclusions Progression to AIDS and death following HIV diagnosis differed in age at diagnosis, transmission categories, CD4+ T-cell counts and HAART. Effective interventions should target those at higher risk for morbidity or mortality, ensuring early diagnosis and timely treatment to slow down the disease progression. PMID:24376638

Determinants of progression to AIDS and death following HIV diagnosis: a retrospective cohort study in Wuhan, China.

PubMed

Jiang, Hongbo; Xie, Nianhua; Cao, Beibei; Tan, Li; Fan, Yunzhou; Zhang, Fan; Yao, Zhongzhao; Liu, Li; Nie, Shaofa

2013-01-01

To identify determinants associated with disease progression and death following human immunodeficiency virus (HIV) diagnosis. Disease progression data from the diagnosis of HIV infection or acquiring immunodeficiency syndrome (AIDS) to February 29, 2012 were retrospectively collected from the national surveillance system databases and the national treatment database in Wuhan, China. Kaplan-Meier method, Logistic regression and Cox proportional hazards model were applied to identify the related factors of progression to AIDS or death following HIV diagnosis. By the end of February 2012, 181 of 691 HIV infectors developed to AIDS, and 129 of 470 AIDS patients died among whom 289 cases received concurrent HIV/AIDS diagnosis. Compared with men infected through homosexual behavior, injection drug users possessed sharply decreased hazard ratio (HR) for progression to AIDS following HIV diagnosis [HR = 0.31, 95% confidence interval (CI), 0.18-0.54, P = 4.01×10(-5)]. HIV infectors at least 60 years presented 1.15-fold (HR = 2.15, 95% CI, 1.15-4.03, P = 0.017) increased risk to develop AIDS when compared with those aged 17-29 years. Similarly, AIDS patients with diagnosis ages between 50 and 59 years were at a 1.60-fold higher risk of death (HR = 2.60, 95% CI, 1.18-5.72, P = 0.017) compared to those aged 19-29 years. AIDS patients with more CD4(+) T-cells within 6 months at diagnosis (cell/µL) presented lower risk of death (HR = 0.29 for 50- vs <50, 95% CI, 0.15-0.59, P = 0.001). The highly active antiretroviral therapy (HAART) delayed progression to AIDS from HIV diagnosis (HR = 0.15, 95% CI, 0.07-0.34, P = 6.46×10(-6)) and reduced the risk of death after AIDS diagnosis (HR = 0.02, 95% CI, 0.01-0.04, P = 7.25×10(-25)). Progression to AIDS and death following HIV diagnosis differed in age at diagnosis, transmission categories, CD4(+) T-cell counts and HAART. Effective interventions should target those at higher risk for morbidity or mortality, ensuring early diagnosis and timely treatment to slow down the disease progression.

Effects of stigma on the mental health of adolescents orphaned by AIDS.

PubMed

Cluver, Lucie D; Gardner, Frances; Operario, Don

2008-04-01

By 2010, an estimated 18.4 million children in Sub-Saharan Africa will be orphaned by AIDS. Research in South Africa shows that AIDS orphanhood is independently associated with heightened levels of psychological problems. This study is the first to explore the mediating effects of stigma and other factors operating on a community level, on associations between AIDS orphanhood and mental health. We assessed the associations of four risk factors that can potentially be addressed at a community level (bullying, stigma, community violence, and lack of positive activities) with psychological problems and orphanhood status. One thousand twenty-five participants aged 10-19 were recruited from deprived urban settlements in South Africa. The sample included adolescents orphaned by AIDS (n = 425), adolescents orphaned by non-AIDS causes (n = 241), and nonorphaned adolescents (n = 278). Participants were interviewed using standardized psychological measures of depression, anxiety, posttraumatic stress, peer problems, delinquency, and conduct problems. Information on risk factors and demographic characteristics were also assessed. AIDS-orphaned adolescents reported higher levels of stigma and fewer positive activities than other groups. There were no reported differences on bullying or community violence. All community-level risk factors were associated with poorer psychological outcomes. Multivariate analyses controlling for age and gender showed that experience of stigma significantly mediated associations between AIDS orphanhood and poor psychological outcomes. Reduction of AIDS-related stigma could potentially reduce adverse psychological outcomes among AIDS-orphaned adolescents.

Cumulative risk and AIDS-orphanhood: interactions of stigma, bullying and poverty on child mental health in South Africa.

PubMed

Cluver, Lucie; Orkin, Mark

2009-10-01

Research shows that AIDS-orphaned children are more likely to experience clinical-range psychological problems. Little is known about possible interactions between factors mediating these high distress levels. We assessed how food insecurity, bullying, and AIDS-related stigma interacted with each other and with likelihood of experiencing clinical-range disorder. In South Africa, 1025 adolescents completed standardised measures of depression, anxiety and post-traumatic stress. 52 potential mediators were measured, including AIDS-orphanhood status. Logistic regressions and hierarchical log-linear modelling were used to identify interactions among significant risk factors. Food insecurity, stigma and bullying all independently increased likelihood of disorder. Poverty and stigma were found to interact strongly, and with both present, likelihood of disorder rose from 19% to 83%. Similarly, bullying interacted with AIDS-orphanhood status, and with both present, likelihood of disorder rose from 12% to 76%. Approaches to alleviating psychological distress amongst AIDS-affected children must address cumulative risk effects.