Diagnosis and Characterization of Patellofemoral Instability: Review of Available Imaging Modalities.

PubMed

Haj-Mirzaian, Arya; Thawait, Gaurav K; Tanaka, Miho J; Demehri, Shadpour

2017-06-01

Patellofemoral instability (PI) is defined as single or multiple episodes of patellar dislocation. Imaging modalities are useful for characterization of patellar malalignment, maltracking, underlying morphologic abnormalities, and stabilizing soft-tissue injuries. Using these findings, orthopedic surgeons can decide when to operate, determine the best operation, and measure degree of correction postoperatively in PI patients. Also, these methods assist with PI diagnosis in some suspicious cases. Magnetic resonance imaging is the preferred method especially in the setting of acute dislocations. Multidetector computed tomography allows a more accurate assessment for malalignment such as patellar tilt and lateral subluxation and secondary osteoarthritis. Dynamic magnetic resonance imaging and 4-dimensional computed tomography have been introduced for better kinematic assessment of the patellofemoral maltracking during extension-flexion motions. In this review article, we will discuss the currently available evidence regarding both the conventional and the novel imaging modalities that can be used for diagnosis and characterization of PI.

Computer-assisted innovations in craniofacial surgery.

PubMed

Rudman, Kelli; Hoekzema, Craig; Rhee, John

2011-08-01

Reconstructive surgery for complex craniofacial defects challenges even the most experienced surgeons. Preoperative reconstructive planning requires consideration of both functional and aesthetic properties of the mandible, orbit, and midface. Technological innovations allow for computer-assisted preoperative planning, computer-aided manufacturing of patient-specific implants (PSIs), and computer-assisted intraoperative navigation. Although many case reports discuss computer-assisted preoperative planning and creation of custom implants, a general overview of computer-assisted innovations is not readily available. This article reviews innovations in computer-assisted reconstructive surgery including anatomic considerations when using PSIs, technologies available for preoperative planning, work flow and process of obtaining a PSI, and implant materials available for PSIs. A case example follows illustrating the use of this technology in the reconstruction of an orbital-frontal-temporal defect with a PSI. Computer-assisted reconstruction of complex craniofacial defects provides the reconstructive surgeon with innovative options for challenging reconstructive cases. As technology advances, applications of computer-assisted reconstruction will continue to expand. © Thieme Medical Publishers.

Microwave assisted pyrolysis of halogenated plastics recovered from waste computers.

PubMed

Rosi, Luca; Bartoli, Mattia; Frediani, Marco

2018-03-01

Microwave Assisted Pyrolysis (MAP) of the plastic fraction of Waste from Electric and Electronic Equipment (WEEE) from end-life computers was run with different absorbers and set-ups in a multimode batch reactor. A large amount of various different liquid fractions (up to 76.6wt%) were formed together with a remarkable reduction of the solid residue (up to 14.2wt%). The liquid fractions were characterized using the following different techniques: FT-IR ATR, 1 H NMR and a quantitative GC-MS analysis. The liquid fractions showed low density and viscosity, together with a high concentration of useful chemicals such as styrene (up to 117.7mg/mL), xylenes (up to 25.6mg/mL for p-xylene) whereas halogenated compounds were absent or present in a very low amounts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Implementing Computer Technology in the Rehabilitation Process.

ERIC Educational Resources Information Center

McCollum, Paul S., Ed.; Chan, Fong, Ed.

1985-01-01

This special issue contains seven articles, addressing rehabilitation in the information age, computer-assisted rehabilitation services, computer technology in rehabilitation counseling, computer-assisted career exploration and vocational decision making, computer-assisted assessment, computer enhanced employment opportunities for persons with…

77 FR 39498 - Guidances for Industry and Food and Drug Administration Staff: Computer-Assisted Detection...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

...] Guidances for Industry and Food and Drug Administration Staff: Computer-Assisted Detection Devices Applied... Clinical Performance Assessment: Considerations for Computer-Assisted Detection Devices Applied to... guidance, entitled ``Computer-Assisted Detection Devices Applied to Radiology Images and Radiology Device...

Computer-Assisted Exposure Treatment for Flight Phobia

ERIC Educational Resources Information Center

Tortella-Feliu, Miguel; Bornas, Xavier; Llabres, Jordi

2008-01-01

This review introduces the state of the art in computer-assisted treatment for behavioural disorders. The core of the paper is devoted to describe one of these interventions providing computer-assisted exposure for flight phobia treatment, the Computer-Assisted Fear of Flying Treatment (CAFFT). The rationale, contents and structure of the CAFFT…

Characterization of ion-assisted induced absorption in A-Si thin-films used for multivariate optical computing

NASA Astrophysics Data System (ADS)

Nayak, Aditya B.; Price, James M.; Dai, Bin; Perkins, David; Chen, Ding Ding; Jones, Christopher M.

2015-06-01

Multivariate optical computing (MOC), an optical sensing technique for analog calculation, allows direct and robust measurement of chemical and physical properties of complex fluid samples in high-pressure/high-temperature (HP/HT) downhole environments. The core of this MOC technology is the integrated computational element (ICE), an optical element with a wavelength-dependent transmission spectrum designed to allow the detector to respond sensitively and specifically to the analytes of interest. A key differentiator of this technology is it uses all of the information present in the broadband optical spectrum to determine the proportion of the analyte present in a complex fluid mixture. The detection methodology is photometric in nature; therefore, this technology does not require a spectrometer to measure and record a spectrum or a computer to perform calculations on the recorded optical spectrum. The integrated computational element is a thin-film optical element with a specific optical response function designed for each analyte. The optical response function is achieved by fabricating alternating layers of high-index (a-Si) and low-index (SiO2) thin films onto a transparent substrate (BK7 glass) using traditional thin-film manufacturing processes (e.g., ion-assisted e-beam vacuum deposition). A proprietary software and process are used to control the thickness and material properties, including the optical constants of the materials during deposition to achieve the desired optical response function. The ion-assisted deposition is useful for controlling the densification of the film, stoichiometry, and material optical constants as well as to achieve high deposition growth rates and moisture-stable films. However, the ion-source can induce undesirable absorption in the film; and subsequently, modify the optical constants of the material during the ramp-up and stabilization period of the e-gun and ion-source, respectively. This paper characterizes the unwanted absorption in the a-Si thin-film using advanced thin-film metrology methods, including spectroscopic ellipsometry and Fourier transform infrared (FTIR) spectroscopy. The resulting analysis identifies a fundamental mechanism contributing to this absorption and a method for minimizing and accounting for the unwanted absorption in the thin-film such that the exact optical response function can be achieved.

The Application of Web-based Computer-assisted Instruction Courseware within Health Assessment

NASA Astrophysics Data System (ADS)

Xiuyan, Guo

Health assessment is a clinical nursing course and places emphasis on clinical skills. The application of computer-assisted instruction in the field of nursing teaching solved the problems in the traditional lecture class. This article stated teaching experience of web-based computer-assisted instruction, based upon a two-year study of computer-assisted instruction courseware use within the course health assessment. The computer-assisted instruction courseware could develop teaching structure, simulate clinical situations, create teaching situations and facilitate students study.

Design Principles for Computer-Assisted Instruction in Histology Education: An Exploratory Study

ERIC Educational Resources Information Center

Deniz, Hasan; Cakir, Hasan

2006-01-01

The purpose of this paper is to describe the development process and the key components of a computer-assisted histology material. Computer-assisted histology material is designed to supplement traditional histology education in a large Midwestern university. Usability information of the computer-assisted instruction (CAI) material was obtained…

45 CFR 233.35 - Computing the assistance payment under retrospective budgeting after the initial one or two...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Computing the assistance payment under... FINANCIAL ASSISTANCE PROGRAMS § 233.35 Computing the assistance payment under retrospective budgeting after... shall be computed retrospectively, i.e., shall be based on income and other relevant circumstances in...

Cavity QED implementation of non-adiabatic holonomies for universal quantum gates in decoherence-free subspaces with nitrogen-vacancy centers.

PubMed

Zhou, Jian; Yu, Wei-Can; Gao, Yu-Mei; Xue, Zheng-Yuan

2015-06-01

A cavity QED implementation of the non-adiabatic holonomic quantum computation in decoherence-free subspaces is proposed with nitrogen-vacancy centers coupled commonly to the whispering-gallery mode of a microsphere cavity, where a universal set of quantum gates can be realized on the qubits. In our implementation, with the assistant of the appropriate driving fields, the quantum evolution is insensitive to the cavity field state, which is only virtually excited. The implemented non-adiabatic holonomies, utilizing optical transitions in the Λ type of three-level configuration of the nitrogen-vacancy centers, can be used to construct a universal set of quantum gates on the encoded logical qubits. Therefore, our scheme opens up the possibility of realizing universal holonomic quantum computation with cavity assisted interaction on solid-state spins characterized by long coherence times.

Usability of an Adaptive Computer Assistant that Improves Self-care and Health Literacy of Older Adults

PubMed Central

Blanson Henkemans, O. A.; Rogers, W. A.; Fisk, A. D.; Neerincx, M. A.; Lindenberg, J.; van der Mast, C. A. P. G.

2014-01-01

Summary Objectives We developed an adaptive computer assistant for the supervision of diabetics’ self-care, to support limiting illness and need for acute treatment, and improve health literacy. This assistant monitors self-care activities logged in the patient’s electronic diary. Accordingly, it provides context-aware feedback. The objective was to evaluate whether older adults in general can make use of the computer assistant and to compare an adaptive computer assistant with a fixed one, concerning its usability and contribution to health literacy. Methods We conducted a laboratory experiment in the Georgia Tech Aware Home wherein 28 older adults participated in a usability evaluation of the computer assistant, while engaged in scenarios reflecting normal and health-critical situations. We evaluated the assistant on effectiveness, efficiency, satisfaction, and educational value. Finally, we studied the moderating effects of the subjects’ personal characteristics. Results Logging self-care tasks and receiving feedback from the computer assistant enhanced the subjects’ knowledge of diabetes. The adaptive assistant was more effective in dealing with normal and health-critical situations, and, generally, it led to more time efficiency. Subjects’ personal characteristics had substantial effects on the effectiveness and efficiency of the two computer assistants. Conclusions Older adults were able to use the adaptive computer assistant. In addition, it had a positive effect on the development of health literacy. The assistant has the potential to support older diabetics’ self care while maintaining quality of life. PMID:18213433

Blood Pump Development Using Rocket Engine Flow Simulation Technology

NASA Technical Reports Server (NTRS)

Kwak, Dochan; Kiris, Cetin

2001-01-01

This paper reports the progress made towards developing complete blood flow simulation capability in humans, especially in the presence of artificial devices such as valves and ventricular assist devices. Devices modeling poses unique challenges different from computing the blood flow in natural hearts and arteries. There are many elements needed to quantify the flow in these devices such as flow solvers, geometry modeling including flexible walls, moving boundary procedures and physiological characterization of blood. As a first step, computational technology developed for aerospace applications was extended to the analysis and development of a ventricular assist device (VAD), i.e., a blood pump. The blood flow in a VAD is practically incompressible and Newtonian, and thus an incompressible Navier-Stokes solution procedure can be applied. A primitive variable formulation is used in conjunction with the overset grid approach to handle complex moving geometry. The primary purpose of developing the incompressible flow analysis capability was to quantify the flow in advanced turbopump for space propulsion system. The same procedure has been extended to the development of NASA-DeBakey VAD that is based on an axial blood pump. Due to massive computing requirements, high-end computing is necessary for simulating three-dimensional flow in these pumps. Computational, experimental, and clinical results are presented.

An intelligent interface for satellite operations: Your Orbit Determination Assistant (YODA)

NASA Technical Reports Server (NTRS)

Schur, Anne

1988-01-01

An intelligent interface is often characterized by the ability to adapt evaluation criteria as the environment and user goals change. Some factors that impact these adaptations are redefinition of task goals and, hence, user requirements; time criticality; and system status. To implement adaptations affected by these factors, a new set of capabilities must be incorporated into the human-computer interface design. These capabilities include: (1) dynamic update and removal of control states based on user inputs, (2) generation and removal of logical dependencies as change occurs, (3) uniform and smooth interfacing to numerous processes, databases, and expert systems, and (4) unobtrusive on-line assistance to users of concepts were applied and incorporated into a human-computer interface using artificial intelligence techniques to create a prototype expert system, Your Orbit Determination Assistant (YODA). YODA is a smart interface that supports, in real teime, orbit analysts who must determine the location of a satellite during the station acquisition phase of a mission. Also described is the integration of four knowledge sources required to support the orbit determination assistant: orbital mechanics, spacecraft specifications, characteristics of the mission support software, and orbit analyst experience. This initial effort is continuing with expansion of YODA's capabilities, including evaluation of results of the orbit determination task.

Using the Computer in Special Vocational Programs. Inservice Activities.

ERIC Educational Resources Information Center

Lane, Kenneth; Ward, Raymond

This inservice manual is intended to assist vocational education teachers in using the techniques of computer-assisted instruction in special vocational education programs. Addressed in the individual units are the following topics: the basic principles of computer-assisted instruction (TRS-80 computers and typing on a computer keyboard); money…

Promoting Intrinsic and Extrinsic Motivation among Chemistry Students Using Computer-Assisted Instruction

ERIC Educational Resources Information Center

Gambari, Isiaka A.; Gbodi, Bimpe E.; Olakanmi, Eyitao U.; Abalaka, Eneojo N.

2016-01-01

The role of computer-assisted instruction in promoting intrinsic and extrinsic motivation among Nigerian secondary school chemistry students was investigated in this study. The study employed two modes of computer-assisted instruction (computer simulation instruction and computer tutorial instructional packages) and two levels of gender (male and…

Chemotaxis of Amoeba proteus in the developing pH gradient within a pocket-like chamber studied with the computer assisted method.

PubMed

Korohoda, W; Golda, J; Sroka, J; Wojnarowicz, A; Jochym, P; Madeja, Z

1997-01-01

A new "U" shaped, pocket-like chamber was used to observe the chemotactic responses of individual cells. This method permits monitoring of both the development of the concentration gradient of a tested substance and cell locomotion. We investigated the chemotactic responses of Amoeba proteus and observed that the amoebae moved in positively and negatively developing [H+] gradients towards the solution of lower pH in a pH range 5.75-7.75. The chemotactic response of amoebae to [H+] gradients required the presence of extracellular calcium ions. It was blocked and random locomotion was restored by the replacement of calcium with magnesium in the cell medium. Time-lapse video recording and data processing were accomplished with computer-assisted methods. This made it possible to compare selected methods of data presentation and analysis for cells locomoting in isotropic and anisotropic conditions. The cell trajectories were determined and displayed in circular diagrams, lengths of cell tracks and final cell displacements were estimated and a few parameters characterizing cell locomotion were computed.

Designing and Creating Computer-Assisted Instruction.

ERIC Educational Resources Information Center

McMeen, George R.

Designed to encourage the use of a defined methodology and careful planning in creating computer-assisted instructional programs, this paper describes the instructional design process, compares computer-assisted instruction (CAI) and programmed instruction (PI), and discusses pragmatic concerns in computer programming. Topics addressed include:…

Diagnosis and management of solitary pulmonary nodules.

PubMed

Jeong, Yeon Joo; Lee, Kyung Soo; Kwon, O Jung

2008-12-01

The advent of computed tomography (CT) screening with or without the help of computer-aided detection systems has increased the detection rate of solitary pulmonary nodules (SPNs), including that of early peripheral lung cancer. Helical dynamic (HD)CT, providing the information on morphologic and hemodynamic characteristics with high specificity and reasonably high accuracy, can be used for the initial assessment of SPNs. (18)F-fluorodeoxyglucose PET/CT is more sensitive at detecting malignancy than HDCT. Therefore, PET/CT may be selectively performed to characterize SPNs when HDCT gives an inconclusive diagnosis. Serial volume measurements are currently the most reliable methods for the tissue characterization of subcentimeter nodules. When malignant nodule is highly suspected for subcentimeter nodules, video-assisted thoracoscopic surgery nodule removal after nodule localization using the pulmonary nodule-marker system may be performed for diagnosis and treatment.

Intelligent Computer-Assisted Language Learning.

ERIC Educational Resources Information Center

Harrington, Michael

1996-01-01

Introduces the field of intelligent computer assisted language learning (ICALL) and relates them to current practice in computer assisted language learning (CALL) and second language learning. Points out that ICALL applies expertise from artificial intelligence and the computer and cognitive sciences to the development of language learning…

Exploring the experience of clients with tetraplegia utilizing assistive technology for computer access.

PubMed

Folan, Alyce; Barclay, Linda; Cooper, Cathy; Robinson, Merren

2015-01-01

Assistive technology for computer access can be used to facilitate people with a spinal cord injury to utilize mainstream computer applications, thereby enabling participation in a variety of meaningful occupations. The aim of this study was to gain an understanding of the experiences of clients with tetraplegia trialing assistive technologies for computer access during different stages in a public rehabilitation service. In order to explore the experiences of clients with tetraplegia trialing assistive technologies for computer use, qualitative methodology was selected. Data were collected from seven participants using semi-structured interviews, which were audio-taped, transcribed and analyzed thematically. Three main themes were identified. These were: getting back into life, assisting in adjusting to injury and learning new skills. The findings from this study demonstrated that people with tetraplegia can be assisted to return to previous life roles or engage in new roles, through developing skills in the use of assistive technology for computer access. Being able to use computers for meaningful activities contributed to the participants gaining an enhanced sense of self-efficacy, and thereby quality of life. Implications for Rehabilitation Findings from this pilot study indicate that people with tetraplegia can be assisted to return to previous life roles, and develop new roles that have meaning to them through the use of assistive technologies for computer use. Being able to use the internet to socialize, and complete daily tasks, contributed to the participants gaining a sense of control over their lives. Early introduction to assistive technology is important to ensure sufficient time for newly injured people to feel comfortable enough with the assistive technology to use the computers productively by the time of discharge. Further research into this important and expanding area is indicated.

Mid-term survival analysis of closed wedge high tibial osteotomy: A comparative study of computer-assisted and conventional techniques.

PubMed

Bae, Dae Kyung; Song, Sang Jun; Kim, Kang Il; Hur, Dong; Jeong, Ho Yeon

2016-03-01

The purpose of the present study was to compare the clinical and radiographic results and survival rates between computer-assisted and conventional closing wedge high tibial osteotomies (HTOs). Data from a consecutive cohort comprised of 75 computer-assisted HTOs and 75 conventional HTOs were retrospectively reviewed. The Knee Society knee and function scores, Hospital for Special Surgery (HSS) score and femorotibial angle (FTA) were compared between the two groups. Survival rates were also compared with procedure failure. The knee and function scores at one year postoperatively were slightly better in the computer-assisted group than those in conventional group (90.1 vs. 86.1) (82.0 vs. 76.0). The HSS scores at one year postoperatively were slightly better for the computer-assisted HTOs than those of conventional HTOs (89.5 vs. 81.8). The inlier of the postoperative FTA was wider in the computer-assisted group than that in the conventional HTO group (88.0% vs. 58.7%), and mean postoperative FTA was greater in the computer-assisted group that in the conventional HTO group (valgus 9.0° vs. valgus 7.6°, p<0.001). The five- and 10-year survival rates were 97.1% and 89.6%, respectively. No difference was detected in nine-year survival rates (p=0.369) between the two groups, although the clinical and radiographic results were better in the computer-assisted group that those in the conventional HTO group. Mid-term survival rates did not differ between computer-assisted and conventional HTOs. A comparative analysis of longer-term survival rate is required to demonstrate the long-term benefit of computer-assisted HTO. III. Copyright © 2015 Elsevier B.V. All rights reserved.

Medical education as a science: the quality of evidence for computer-assisted instruction.

PubMed

Letterie, Gerard S

2003-03-01

A marked increase in the number of computer programs for computer-assisted instruction in the medical sciences has occurred over the past 10 years. The quality of both the programs and the literature that describe these programs has varied considerably. The purposes of this study were to evaluate the published literature that described computer-assisted instruction in medical education and to assess the quality of evidence for its implementation, with particular emphasis on obstetrics and gynecology. Reports published between 1988 and 2000 on computer-assisted instruction in medical education were identified through a search of MEDLINE and Educational Resource Identification Center and a review of the bibliographies of the articles that were identified. Studies were selected if they included a description of computer-assisted instruction in medical education, regardless of the type of computer program. Data were extracted with a content analysis of 210 reports. The reports were categorized according to study design (comparative, prospective, descriptive, review, or editorial), type of computer-assisted instruction, medical specialty, and measures of effectiveness. Computer-assisted instruction programs included online technologies, CD-ROMs, video laser disks, multimedia work stations, virtual reality, and simulation testing. Studies were identified in all medical specialties, with a preponderance in internal medicine, general surgery, radiology, obstetrics and gynecology, pediatrics, and pathology. Ninety-six percent of the articles described a favorable impact of computer-assisted instruction in medical education, regardless of the quality of the evidence. Of the 210 reports that were identified, 60% were noncomparative, descriptive reports of new techniques in computer-assisted instruction, and 15% and 14% were reviews and editorials, respectively, of existing technology. Eleven percent of studies were comparative and included some form of assessment of the effectiveness of the computer program. These assessments included pre- and posttesting and questionnaires to score program quality, perceptions of the medical students and/or residents regarding the program, and impact on learning. In one half of these comparative studies, computer-assisted instruction was compared with traditional modes of teaching, such as text and lectures. Six studies compared performance before and after the computer-assisted instruction. Improvements were shown in 5 of the studies. In the remainder of the studies, computer-assisted instruction appeared to result in similar test performance. Despite study design or outcome, most articles described enthusiastic endorsement of the programs by the participants, including medical students, residents, and practicing physicians. Only 1 study included cost analysis. Thirteen of the articles were in obstetrics and gynecology. Computer-assisted instruction has assumed to have an increasing role in medical education. In spite of enthusiastic endorsement and continued improvements in software, few studies of good design clearly demonstrate improvement in medical education over traditional modalities. There are no comparative studies in obstetrics and gynecology that demonstrate a clear-cut advantage. Future studies of computer-assisted instruction that include comparisons and cost assessments to gauge their effectiveness over traditional methods may better define their precise role.

Exploiting the Complementarity between Dereplication and Computer-Assisted Structure Elucidation for the Chemical Profiling of Natural Cosmetic Ingredients: Tephrosia purpurea as a Case Study.

PubMed

Hubert, Jane; Chollet, Sébastien; Purson, Sylvain; Reynaud, Romain; Harakat, Dominique; Martinez, Agathe; Nuzillard, Jean-Marc; Renault, Jean-Hugues

2015-07-24

The aqueous-ethanolic extract of Tephrosia purpurea seeds is currently exploited in the cosmetic industry as a natural ingredient of skin lotions. The aim of this study was to chemically characterize this ingredient by combining centrifugal partition extraction (CPE) as a fractionation tool with two complementary identification approaches involving dereplication and computer-assisted structure elucidation. Following two rapid fractionations of the crude extract (2 g), seven major compounds namely, caffeic acid, quercetin-3-O-rutinoside, ethyl galactoside, ciceritol, stachyose, saccharose, and citric acid, were unambiguously identified within the CPE-generated simplified mixtures by a recently developed (13)C NMR-based dereplication method. The structures of four additional compounds, patuletin-3-O-rutinoside, kaempferol-3-O-rutinoside, guaiacylglycerol 8-vanillic acid ether, and 2-methyl-2-glucopyranosyloxypropanoic acid, were automatically elucidated by using the Logic for Structure Determination program based on the interpretation of 2D NMR (HSQC, HMBC, and COSY) connectivity data. As more than 80% of the crude extract mass was characterized without need for tedious and labor-intensive multistep purification procedures, the identification tools involved in this work constitute a promising strategy for an efficient and time-saving chemical profiling of natural extracts.

Computer Assisted Learning in Numeracy.

ERIC Educational Resources Information Center

Hollin, Freda

Computer-assisted learning in numeracy for adults is far less developed than computer-assisted learning in literacy. Although a great many software programs exist, few are suitable for adults and many offer only drill and practice exercises instead of teaching genuine computer skills. One approach instructors can take is to have their students use…

45 CFR 233.34 - Computing the assistance payment in the initial one or two months (AFDC).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Computing the assistance payment in the initial... § 233.34 Computing the assistance payment in the initial one or two months (AFDC). A State shall compute...) If the initial month is computed prospectively as in paragraph (a) of this section, the second month...

25 CFR 20.313 - How will the Bureau compute financial assistance payments?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false How will the Bureau compute financial assistance payments? 20.313 Section 20.313 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES... will the Bureau compute financial assistance payments? (a) The social services worker will compute...

Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

ERIC Educational Resources Information Center

Nee, John G.; Kare, Audhut P.

1987-01-01

Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

Computer Assisted Language Learning. Routledge Studies in Computer Assisted Language Learning

ERIC Educational Resources Information Center

Pennington, Martha

2011-01-01

Computer-assisted language learning (CALL) is an approach to language teaching and learning in which computer technology is used as an aid to the presentation, reinforcement and assessment of material to be learned, usually including a substantial interactive element. This books provides an up-to date and comprehensive overview of…

Computer-aided tracking and characterization of homicides and sexual assaults (CATCH)

NASA Astrophysics Data System (ADS)

Kangas, Lars J.; Terrones, Kristine M.; Keppel, Robert D.; La Moria, Robert D.

1999-03-01

When a serial offender strikes, it usually means that the investigation is unprecedented for that police agency. The volume of incoming leads and pieces of information in the case(s) can be overwhelming as evidenced by the thousands of leads gathered in the Ted Bundy Murders, Atlanta Child Murders, and the Green River Murders. Serial cases can be long term investigations in which the suspect remains unknown and continues to perpetrate crimes. With state and local murder investigative systems beginning to crop up, it will become important to manage that information in a timely and efficient way by developing computer programs to assist in that task. One vital function will be to compare violent crime cases from different jurisdictions so investigators can approach the investigation knowing that similar cases exist. CATCH (Computer Aided Tracking and Characterization of Homicides) is being developed to assist crime investigations by assessing likely characteristics of unknown offenders, by relating a specific crime case to other cases, and by providing a tool for clustering similar cases that may be attributed to the same offenders. CATCH is a collection of tools that assist the crime analyst in the investigation process by providing advanced data mining and visualization capabilities.These tools include clustering maps, query tools, geographic maps, timelines, etc. Each tool is designed to give the crime analyst a different view of the case data. The clustering tools in CATCH are based on artificial neural networks (ANNs). The ANNs learn to cluster similar cases from approximately 5000 murders and 3000 sexual assaults residing in a database. The clustering algorithm is applied to parameters describing modus operandi (MO), signature characteristics of the offenders, and other parameters describing the victim and offender. The proximity of cases within a two-dimensional representation of the clusters allows the analyst to identify similar or serial murders and sexual assaults.

Semi-Automated Identification of Rocks in Images

NASA Technical Reports Server (NTRS)

Bornstein, Benjamin; Castano, Andres; Anderson, Robert

2006-01-01

Rock Identification Toolkit Suite is a computer program that assists users in identifying and characterizing rocks shown in images returned by the Mars Explorer Rover mission. Included in the program are components for automated finding of rocks, interactive adjustments of outlines of rocks, active contouring of rocks, and automated analysis of shapes in two dimensions. The program assists users in evaluating the surface properties of rocks and soil and reports basic properties of rocks. The program requires either the Mac OS X operating system running on a G4 (or more capable) processor or a Linux operating system running on a Pentium (or more capable) processor, plus at least 128MB of random-access memory.

The Role of Computer-Assisted Technology in Post-Traumatic Orbital Reconstruction: A PRISMA-driven Systematic Review.

PubMed

Wan, Kelvin H; Chong, Kelvin K L; Young, Alvin L

2015-12-08

Post-traumatic orbital reconstruction remains a surgical challenge and requires careful preoperative planning, sound anatomical knowledge and good intraoperative judgment. Computer-assisted technology has the potential to reduce error and subjectivity in the management of these complex injuries. A systematic review of the literature was conducted to explore the emerging role of computer-assisted technologies in post-traumatic orbital reconstruction, in terms of functional and safety outcomes. We searched for articles comparing computer-assisted procedures with conventional surgery and studied outcomes on diplopia, enophthalmos, or procedure-related complications. Six observational studies with 273 orbits at a mean follow-up of 13 months were included. Three out of 4 studies reported significantly fewer patients with residual diplopia in the computer-assisted group, while only 1 of the 5 studies reported better improvement in enophthalmos in the assisted group. Types and incidence of complications were comparable. Study heterogeneities limiting statistical comparison by meta-analysis will be discussed. This review highlights the scarcity of data on computer-assisted technology in orbital reconstruction. The result suggests that computer-assisted technology may offer potential advantage in treating diplopia while its role remains to be confirmed in enophthalmos. Additional well-designed and powered randomized controlled trials are much needed.

The Evolution of Instructional Design Principles for Intelligent Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Dede, Christopher; Swigger, Kathleen

1988-01-01

Discusses and compares the design and development of computer assisted instruction (CAI) and intelligent computer assisted instruction (ICAI). Topics discussed include instructional systems design (ISD), artificial intelligence, authoring languages, intelligent tutoring systems (ITS), qualitative models, and emerging issues in instructional…

Environmental Definition Program Cross Sectional Analysis; Summary of Data and Analysis Techniques

DTIC Science & Technology

1975-12-31

selected locations, and to characterize cloud and precipitation systems during certain tests and experiments conducted at Wallops Flight Center and at...values. The LWCA was on- site at Wallops Flight Center assisting the special Elight measurements. Other computer programs developed were designed to...550581 N 37025, E Kiev 50024 N 30027 E Simferopol 45001, N 33059! E Perm 58001, N 56018, E Aktyubinsk 50020, N 570131 E Semipalatinsk 50021! N 80015

[APPLICATION OF COMPUTER-ASSISTED TECHNOLOGY IN ANALYSIS OF REVISION REASON OF UNICOMPARTMENTAL KNEE ARTHROPLASTY].

PubMed

Jia, Di; Li, Yanlin; Wang, Guoliang; Gao, Huanyu; Yu, Yang

2016-01-01

To conclude the revision reason of unicompartmental knee arthroplasty (UKA) using computer-assisted technology so as to provide reference for reducing the revision incidence and improving the level of surgical technique and rehabilitation. The relevant literature on analyzing revision reason of UKA using computer-assisted technology in recent years was extensively reviewed. The revision reasons by computer-assisted technology are fracture of the medial tibial plateau, progressive osteoarthritis of reserved compartment, dislocation of mobile bearing, prosthesis loosening, polyethylene wear, and unexplained persistent pain. Computer-assisted technology can be used to analyze the revision reason of UKA and guide the best operating method and rehabilitation scheme by simulating the operative process and knee joint activities.

Computer-assisted navigation in orthopedic surgery.

PubMed

Mavrogenis, Andreas F; Savvidou, Olga D; Mimidis, George; Papanastasiou, John; Koulalis, Dimitrios; Demertzis, Nikolaos; Papagelopoulos, Panayiotis J

2013-08-01

Computer-assisted navigation has a role in some orthopedic procedures. It allows the surgeons to obtain real-time feedback and offers the potential to decrease intra-operative errors and optimize the surgical result. Computer-assisted navigation systems can be active or passive. Active navigation systems can either perform surgical tasks or prohibit the surgeon from moving past a predefined zone. Passive navigation systems provide intraoperative information, which is displayed on a monitor, but the surgeon is free to make any decisions he or she deems necessary. This article reviews the available types of computer-assisted navigation, summarizes the clinical applications and reviews the results of related series using navigation, and informs surgeons of the disadvantages and pitfalls of computer-assisted navigation in orthopedic surgery. Copyright 2013, SLACK Incorporated.

Computer-Assisted College Administration. Final Report.

ERIC Educational Resources Information Center

Punga, V.

Rensselaer Polytechnic Institute of Connecticut offered a part-time training program "Computer-Assisted-College-Administration" during the academic year 1969-70. Participants were trained in the utilization of computer-assisted methods in dealing with the common tasks of college administration, the problems of college development and…

Computer-Assisted Inverse Design of Inorganic Electrides

NASA Astrophysics Data System (ADS)

Zhang, Yunwei; Wang, Hui; Wang, Yanchao; Zhang, Lijun; Ma, Yanming

2017-01-01

Electrides are intrinsic electron-rich materials enabling applications as excellent electron emitters, superior catalysts, and strong reducing agents. There are a number of organic electrides; however, their instability at room temperature and sensitivity to moisture are bottlenecks for their practical uses. Known inorganic electrides are rare, but they appear to have greater thermal stability at ambient conditions and are thus better characterized for application. Here, we develop a computer-assisted inverse-design method for searching for a large variety of inorganic electrides unbiased by any known electride structures. It uses the intrinsic property of interstitial electron localization of electrides as the global variable function for swarm intelligence structure searches. We construct two rules of thumb on the design of inorganic electrides pointing to electron-rich ionic systems and low electronegativity of the cationic elements involved. By screening 99 such binary compounds through large-scale computer simulations, we identify 24 stable and 65 metastable new inorganic electrides that show distinct three-, two-, and zero-dimensional conductive properties, among which 18 are existing compounds that have not been pointed to as electrides. Our work reveals the rich abundance of inorganic electrides by providing 33 hitherto unexpected structure prototypes of electrides, of which 19 are not in the known structure databases.

Is Contrast Enhanced Ultrasonography a useful tool in a beginner's hand? How much can a Computer Assisted Diagnosis prototype help in characterizing the malignancy of focal liver lesions?

PubMed

Moga, Tudor Voicu; Popescu, Alina; Sporea, Ioan; Danila, Mirela; David, Ciprian; Gui, Vasile; Iacob, Nicoleta; Miclaus, Gratian; Sirli, Roxana

2017-08-23

Contrast enhanced ultrasound (CEUS) improved the characterization of focal liver lesions (FLLs), but is an operatordependent method. The goal of this paper was to test a computer assisted diagnosis (CAD) prototype and to see its benefit in assisting a beginner in the evaluation of FLLs. Our cohort included 97 good quality CEUS videos[34% hepatocellular carcinomas (HCC), 12.3% hypervascular metastases (HiperM), 11.3% hypovascular metastases (HipoM), 24.7% hemangiomas (HMG), 17.5% focal nodular hyperplasia (FNH)] that were used to develop a CAD prototype based on an algorithm that tested a binary decision based classifier. Two young medical doctors (1 year CEUS experience), two experts and the CAD prototype, reevaluated 50 FLLs CEUS videos (diagnosis of benign vs. malignant) first blinded to clinical data, in order to evaluate the diagnostic gap beginner vs. expert. The CAD classifier managed a 75.2% overall (benign vs. malignant) correct classification rate. The overall classification rates for the evaluators, before and after clinical data were: first beginner-78%; 94%; second beginner-82%; 96%; first expert-94%; 100%; second expert-96%; 98%. For both beginners, the malignant vs. benign diagnosis significantly improved after knowing the clinical data (p=0.005; p=0,008). The expert was better than the beginner (p=0.04) and better than the CAD (p=0.001). CAD in addition to the beginner can reach the expert diagnosis. The most frequent lesions misdiagnosed at CEUS were FNH and HCC. The CAD prototype is a good comparing tool for a beginner operator that can be developed to assist the diagnosis. In order to increase the classification rate, the CAD system for FLL in CEUS must integrate the clinical data.

DFT computations support the σ-complex assisted metathesis (σ-CAM) mechanism for the 1,4-Rh shift of Cp*Rh(III)-(η(1)-β-styryl) complexes.

PubMed

Li, Yougui; He, Gang; Kantchev, Eric Assen B

2014-11-28

DFT calculations support the σ-complex assisted metathesis (σ-CAM) mechanism recently proposed for the first 1,4-Rh shift of a Rh(III) complex rather than the oxidative addition/reductive elimination pathway characteristic of Rh(i). A single, concerted TS (ΔG(‡) = 27-34 kcal mol(-1)) was found and its electronic structure characterized by Bader's AIM analysis. The 4-centered TS is characterized by a enhanced charge separation (Rh and H atoms - positive, both C atoms - negative) relative to the σ-vinyl Rh starting material and the σ-aryl-Rh product. The AIM topological analysis of the electron density reveals a network of interactions: Rh with H as well as both Rh and H with both C(vinyl) and C(aryl) in the TS and confirms the C(vinyl)-Rh agnostic interaction observed experimentally in the σ-aryl-Rh product.

In vivo and in vitro characterization of σ70 constitutive promoters by real-time PCR and fluorescent measurements.

PubMed

Chappell, James; Freemont, Paul

2013-01-01

The characterization of DNA regulatory elements such as ribosome binding sites and transcriptional promoters is a fundamental aim of synthetic biology. Characterization of such DNA regulatory elements by monitoring the synthesis of fluorescent proteins is a commonly used technique to resolve the relative or absolute strengths. These measurements can be used in combination with mathematical models and computer simulation to rapidly assess performance of DNA regulatory elements both in isolation and in combination, to assist predictable and efficient engineering of complex novel biological devices and systems. Here we describe the construction and relative characterization of Escherichia coli (E. coli) σ(70) transcriptional promoters by monitoring the synthesis of green fluorescent protein (GFP) both in vivo in E. coli and in vitro in a E. coli cell-free transcription and translation reaction.

Enhanced cephalomedullary nail lag screw placement and intraoperative tip-apex distance measurement with a novel computer assisted surgery system.

PubMed

Kuhl, Mitchell; Beimel, Claudia

2016-10-01

The goal of this study was to evaluate the ability of a novel computer assisted surgery system to guide ideal placement of a lag screw during cephalomedullary nailing and then accurately measure the tip-apex distance (TAD) measurement intraoperatively. Retrospective case review. Level II trauma hospital. The initial 98 consecutive clinical cases treated with a cephalomedullary nail in conjunction with a novel computer assisted surgery system were retrospectively reviewed. A novel computer assisted surgery system was utilized to enhance lag screw placement during cephalomedullary nailing procedures. The computer assisted surgery system calculates the TAD intraoperatively after final lag screw placement. The ideal TAD was considered to be within a range of 5mm-20mm. The ability of the computer assisted surgery system (CASS) to assist in placement of a lag screw within the ideal TAD was evaluated. Intraoperative TAD measurements provided by the computer assisted surgery system were then compared to standard postoperative TAD measurements on PACS (picture archiving and communication system) images to determine whether these measurements are equivalent. 79 cases (80.6%) were available with complete information for a retrospective review. All cases had CASS TAD and PACS TAD measurements >5mm and<20mm. In addition, no significant difference could be detected between the intraoperative CASS TAD and the postoperative PACS TAD (p=0.374, Wilcoxon Test; p=0.174, paired T-Test). A cut-out rate of 0% was observed in all patients who were treated with CASS in this case series (95% CI: 0 - 3.01%). The novel computer assisted surgery system tested here is an effective and reliable adjunct that can be utilized for optimal lag screw placement in cephalomedullary nailing procedures. The computer assisted surgery system provides an accurate intraoperative TAD measurement that is equivalent to the standard postoperative measurement utilizing PACS images. Therapeutic Level IV. Copyright © 2016 Elsevier Ltd. All rights reserved.

Emergent Literacy Development and Computer Assisted Instruction

ERIC Educational Resources Information Center

Trotti, Judy; Hendricks, Randy; Bledsoe, Christie

2017-01-01

In this mixed-methods study, researchers examined the literacy development of prekindergarten students (N = 162) randomly placed in one of two treatment groups with each receiving 15 minutes of computer-assisted literacy instruction for four months. Literacy development of a control group of children not receiving computer-assisted instruction was…

Focus on Clinical Research: Cognitive Rehabilitation of Severely Closed-Head-Injured Patients Using Computer-Assisted and Noncomputerized Treatment Techniques.

ERIC Educational Resources Information Center

Batchelor, J.; And Others

1988-01-01

The study compared computer assisted cognitive retraining of 47 patients with severe closed head injury with comparable noncomputerized treatment techniques. Results on neuropsychological tests did not support the increased effectiveness of the computer assisted cognitive therapy. (DB)

Middle School Teachers' Perceptions of Computer-Assisted Reading Intervention Programs

ERIC Educational Resources Information Center

Bippert, Kelli; Harmon, Janis

2017-01-01

Middle schools often turn to computer-assisted reading intervention programs to improve student reading. The questions guiding this study are (a) in what ways are computer-assisted reading intervention programs utilized, and (b) what are teachers' perceptions about these intervention programs? Nineteen secondary reading teachers were interviewed…

Computers in the Gym: Friends and Assistants.

ERIC Educational Resources Information Center

Hurwitz, Dick

Designed to assist physical education teachers realize the benefits of microcomputer usage, this paper presents the case study of a hypothetical middle school teacher who utilizes Apple computers for record-keeping, planning, teaching, and coaching. The case study shows how the computers save time, assist in individualizing instruction, help…

Computer-assisted instruction in curricula of physical therapist assistants.

PubMed

Thompson, E C

1987-08-01

This article compares the effectiveness of computer-assisted instruction (CAI) with written, programmed instruction between two groups of physical therapist assistant students. No significant difference in the amount of material learned or retained after completion of testing using either CAI or a written, programmed text was found in this group of 16 subjects. Learning style or attitude about computers did not correlate strongly with performance after the CAI. Findings suggest that more research is needed to support decisions related to fiscal allotments for computer use in college curricula.

Computer-assisted spinal osteotomy: a technical note and report of four cases.

PubMed

Fujibayashi, Shunsuke; Neo, Masashi; Takemoto, Mitsuru; Ota, Masato; Nakayama, Tomitaka; Toguchida, Junya; Nakamura, Takashi

2010-08-15

A report of 4 cases of spinal osteotomy performed under the guidance of a computer-assisted navigation system and a technical note about the use of the navigation system for spinal osteotomy. To document the surgical technique and usefulness of computer-assisted surgery for spinal osteotomy. A computer-assisted navigation system provides accurate 3-dimensional (3D) real-time surgical information during the operation. Although there are many reports on the accuracy and usefulness of a navigation system for pedicle screw placement, there are few reports on the application for spinal osteotomy. We report on 4 complex cases including 3 solitary malignant spinal tumors and 1 spinal kyphotic deformity of ankylosing spondylitis, which were treated surgically using a computer-assisted spinal osteotomy. The surgical technique and postoperative clinical and radiologic results are presented. 3D spinal osteotomy under the guidance of a computer-assisted navigation system was performed successfully in 4 patients. All malignant tumors were resected en bloc, and the spinal deformity was corrected precisely according to the preoperative plan. Pathologic analysis confirmed the en bloc resection without tumor exposure in the 3 patients with a spinal tumor. The use of a computer-assisted navigation system will help ensure the safety and efficacy of a complex 3D spinal osteotomy.

Student perceptions and learning outcomes of computer-assisted versus traditional instruction in physiology.

PubMed

Richardson, D

1997-12-01

This study compared student perceptions and learning outcomes of computer-assisted instruction against those of traditional didactic lectures. Components of Quantitative Circulatory Physiology (Biological Simulators) and Mechanical Properties of Active Muscle (Trinity Software) were used to teach regulation of tissue blood flow and muscle mechanics, respectively, in the course Medical Physiology. These topics were each taught, in part, by 1) standard didactic lectures, 2) computer-assisted lectures, and 3) computer laboratory assignment. Subjective evaluation was derived from a questionnaire assessing student opinions of the effectiveness of each method. Objective evaluation consisted of comparing scores on examination questions generated from each method. On a 1-10 scale, effectiveness ratings were higher (P < 0.0001) for the didactic lectures (7.7) compared with either computer-assisted lecture (3.8) or computer laboratory (4.2) methods. A follow-up discussion with representatives from the class indicated that students did not perceive computer instruction as being time effective. However, examination scores from computer laboratory questions (94.3%) were significantly higher compared with ones from either computer-assisted (89.9%; P < 0.025) or didactic (86.6%; P < 0.001) lectures. Thus computer laboratory instruction enhanced learning outcomes in medical physiology despite student perceptions to the contrary.

Computer-assisted abdominal surgery: new technologies.

PubMed

Kenngott, H G; Wagner, M; Nickel, F; Wekerle, A L; Preukschas, A; Apitz, M; Schulte, T; Rempel, R; Mietkowski, P; Wagner, F; Termer, A; Müller-Stich, Beat P

2015-04-01

Computer-assisted surgery is a wide field of technologies with the potential to enable the surgeon to improve efficiency and efficacy of diagnosis, treatment, and clinical management. This review provides an overview of the most important new technologies and their applications. A MEDLINE database search was performed revealing a total of 1702 references. All references were considered for information on six main topics, namely image guidance and navigation, robot-assisted surgery, human-machine interface, surgical processes and clinical pathways, computer-assisted surgical training, and clinical decision support. Further references were obtained through cross-referencing the bibliography cited in each work. Based on their respective field of expertise, the authors chose 64 publications relevant for the purpose of this review. Computer-assisted systems are increasingly used not only in experimental studies but also in clinical studies. Although computer-assisted abdominal surgery is still in its infancy, the number of studies is constantly increasing, and clinical studies start showing the benefits of computers used not only as tools of documentation and accounting but also for directly assisting surgeons during diagnosis and treatment of patients. Further developments in the field of clinical decision support even have the potential of causing a paradigm shift in how patients are diagnosed and treated.

CAA: Computer Assisted Athletics.

ERIC Educational Resources Information Center

Hall, John H.

Computers have been used in a variety of applications for athletics since the late 1950's. These have ranged from computer-controlled electric scoreboards to computer-designed pole vaulting poles. Described in this paper are a computer-based athletic injury reporting system and a computer-assisted football scouting system. The injury reporting…

Image Analysis Algorithms for Immunohistochemical Assessment of Cell Death Events and Fibrosis in Tissue Sections

PubMed Central

Krajewska, Maryla; Smith, Layton H.; Rong, Juan; Huang, Xianshu; Hyer, Marc L.; Zeps, Nikolajs; Iacopetta, Barry; Linke, Steven P.; Olson, Allen H.; Reed, John C.; Krajewski, Stan

2009-01-01

Cell death is of broad physiological and pathological importance, making quantification of biochemical events associated with cell demise a high priority for experimental pathology. Fibrosis is a common consequence of tissue injury involving necrotic cell death. Using tissue specimens from experimental mouse models of traumatic brain injury, cardiac fibrosis, and cancer, as well as human tumor specimens assembled in tissue microarray (TMA) format, we undertook computer-assisted quantification of specific immunohistochemical and histological parameters that characterize processes associated with cell death. In this study, we demonstrated the utility of image analysis algorithms for color deconvolution, colocalization, and nuclear morphometry to characterize cell death events in tissue specimens: (a) subjected to immunostaining for detecting cleaved caspase-3, cleaved poly(ADP-ribose)-polymerase, cleaved lamin-A, phosphorylated histone H2AX, and Bcl-2; (b) analyzed by terminal deoxyribonucleotidyl transferase–mediated dUTP nick end labeling assay to detect DNA fragmentation; and (c) evaluated with Masson's trichrome staining. We developed novel algorithm-based scoring methods and validated them using TMAs as a high-throughput format. The proposed computer-assisted scoring methods for digital images by brightfield microscopy permit linear quantification of immunohistochemical and histochemical stainings. Examples are provided of digital image analysis performed in automated or semiautomated fashion for successful quantification of molecular events associated with cell death in tissue sections. (J Histochem Cytochem 57:649–663, 2009) PMID:19289554

A Methodological Analysis of Randomized Clinical Trials of Computer-Assisted Therapies for Psychiatric Disorders: Toward Improved Standards for an Emerging Field

PubMed Central

Kiluk, Brian D.; Sugarman, Dawn E.; Nich, Charla; Gibbons, Carly J.; Martino, Steve; Rounsaville, Bruce J.; Carroll, Kathleen M.

2013-01-01

Objective Computer-assisted therapies offer a novel, cost-effective strategy for providing evidence-based therapies to a broad range of individuals with psychiatric disorders. However, the extent to which the growing body of randomized trials evaluating computer-assisted therapies meets current standards of methodological rigor for evidence-based interventions is not clear. Method A methodological analysis of randomized clinical trials of computer-assisted therapies for adult psychiatric disorders, published between January 1990 and January 2010, was conducted. Seventy-five studies that examined computer-assisted therapies for a range of axis I disorders were evaluated using a 14-item methodological quality index. Results Results indicated marked heterogeneity in study quality. No study met all 14 basic quality standards, and three met 13 criteria. Consistent weaknesses were noted in evaluation of treatment exposure and adherence, rates of follow-up assessment, and conformity to intention-to-treat principles. Studies utilizing weaker comparison conditions (e.g., wait-list controls) had poorer methodological quality scores and were more likely to report effects favoring the computer-assisted condition. Conclusions While several well-conducted studies have indicated promising results for computer-assisted therapies, this emerging field has not yet achieved a level of methodological quality equivalent to those required for other evidence-based behavioral therapies or pharmacotherapies. Adoption of more consistent standards for methodological quality in this field, with greater attention to potential adverse events, is needed before computer-assisted therapies are widely disseminated or marketed as evidence based. PMID:21536689

Computers--Teaching, Technology, and Applications.

ERIC Educational Resources Information Center

Cocco, Anthony M.; And Others

1995-01-01

Includes "Managing Personality Types in the Computer Classroom" (Cocco); "External I/O Input/Output with a PC" (Fryda); "The Future of CAD/CAM Computer-Assisted Design/Computer-Assisted Manufacturing Software" (Fulton); and "Teaching Quality Assurance--A Laboratory Approach" (Wojslaw). (SK)

Action Research of Computer-Assisted-Remediation of Basic Research Concepts.

ERIC Educational Resources Information Center

Packard, Abbot L.; And Others

This study investigated the possibility of creating a computer-assisted remediation program to assist students having difficulties in basic college research and statistics courses. A team approach involving instructors and students drove the research into and creation of the computer program. The effect of student use was reviewed by looking at…

Public Computer Assisted Learning Facilities for Children with Visual Impairment: Universal Design for Inclusive Learning

ERIC Educational Resources Information Center

Siu, Kin Wai Michael; Lam, Mei Seung

2012-01-01

Although computer assisted learning (CAL) is becoming increasingly popular, people with visual impairment face greater difficulty in accessing computer-assisted learning facilities. This is primarily because most of the current CAL facilities are not visually impaired friendly. People with visual impairment also do not normally have access to…

Intelligent Computer-Assisted Instruction: A Review and Assessment of ICAI Research and Its Potential for Education.

ERIC Educational Resources Information Center

Dede, Christopher J.; And Others

The first of five sections in this report places intelligent computer-assisted instruction (ICAI) in its historical context through discussions of traditional computer-assisted instruction (CAI) linear and branching programs; TICCIT and PLATO IV, two CAI demonstration projects funded by the National Science Foundation; generative programs, the…

The Effects of Computer-Assisted Feedback Strategies in Technology Education: A Comparison of Learning Outcomes

ERIC Educational Resources Information Center

Adams, Ruifang Hope; Strickland, Jane

2012-01-01

This study investigated the effects of computer-assisted feedback strategies that have been utilized by university students in a technology education curriculum. Specifically, the study examined the effectiveness of the computer-assisted feedback strategy "Knowledge of Response feedback" (KOR), and the "Knowledge of Correct Responses feedback"…

Training Early Childhood Educators: Computer Assisted Instruction Courses in Diagnostic Teaching. Final Report.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Computer-Assisted Instruction Lab.

The Computer Assisted Remedial Education (CARE) project developed two computer-assisted instructional (CAI) courses. The objective was to train educational personnel to use diagnostic teaching in working with preschool and primary grade children who exhibit learning problems. Emphasis was placed upon the use of new technology in providing…

Personalized Computer-Assisted Mathematics Problem-Solving Program and Its Impact on Taiwanese Students

ERIC Educational Resources Information Center

Chen, Chiu-Jung; Liu, Pei-Lin

2007-01-01

This study evaluated the effects of a personalized computer-assisted mathematics problem-solving program on the performance and attitude of Taiwanese fourth grade students. The purpose of this study was to determine whether the personalized computer-assisted program improved student performance and attitude over the nonpersonalized program.…

The Efficacy of the Internet-Based Blackboard Platform in Developmental Writing Classes

ERIC Educational Resources Information Center

Shudooh, Yusuf M.

2016-01-01

The application of computer-assisted platforms in writing classes is a relatively new paradigm in education. The adoption of computers-assisted writing classes is gaining ground in many western and non western universities. Numerous issues can be addressed when conducting computer-assisted classes (CAC). However, a few studies conducted to assess…

Computer-Assisted Assessment in Higher Education. Staff and Educational Development Series.

ERIC Educational Resources Information Center

Brown, Sally, Ed.; Race, Phil, Ed.; Bull, Joanna, Ed.

This book profiles how computer-assisted assessment can help both staff and students by drawing on the experience and expertise of practitioners, in the United Kingdom and internationally, who are already using computer-assisted assessment. The publication is organized into three main sections--"Pragmatics and Practicalities of CAA,""Using CAA for…

Computer-Assisted Diagnostic Decision Support: History, Challenges, and Possible Paths Forward

ERIC Educational Resources Information Center

Miller, Randolph A.

2009-01-01

This paper presents a brief history of computer-assisted diagnosis, including challenges and future directions. Some ideas presented in this article on computer-assisted diagnostic decision support systems (CDDSS) derive from prior work by the author and his colleagues (see list in Acknowledgments) on the INTERNIST-1 and QMR projects. References…

STIC: Photonic Quantum Computation through Cavity Assisted Interaction

DTIC Science & Technology

2007-12-28

PRA ; available as quant-ph/06060791. Report for the grant “Photonic Quantum Computation through Cavity Assisted Interaction” from DTO Luming Duan...cavity •B. Wang, L.-M. Duan, PRA 72 (in press, 2005) Single-photon source Photonic Quantum Computation through Cavity-Assisted Interaction H. Jeff Kimble...interaction [Duan, Wang, Kimble, PRA 05] • “Investigate more efficient methods for combating noise in photonic quantum computation ” • Partial progress

Recent advances in bird sperm morphometric analysis and its role in male gamete characterization and reproduction technologies

PubMed Central

Santiago-Moreno, Julian; Esteso, Milagros Cristina; Villaverde-Morcillo, Silvia; Toledano-Díaz, Adolfo; Castaño, Cristina; Velázquez, Rosario; López-Sebastián, Antonio; Goya, Agustín López; Martínez, Javier Gimeno

2016-01-01

Postcopulatory sexual selection through sperm competition may be an important evolutionary force affecting many reproductive traits, including sperm morphometrics. Environmental factors such as pollutants, pesticides, and climate change may affect different sperm traits, and thus reproduction, in sensitive bird species. Many sperm-handling processes used in assisted reproductive techniques may also affect the size of sperm cells. The accurately measured dimensions of sperm cell structures (especially the head) can thus be used as indicators of environmental influences, in improving our understanding of reproductive and evolutionary strategies, and for optimizing assisted reproductive techniques (e.g., sperm cryopreservation) for use with birds. Computer-assisted sperm morphometry analysis (CASA-Morph) provides an accurate and reliable method for assessing sperm morphometry, reducing the problem of subjectivity associated with human visual assessment. Computerized systems have been standardized for use with semen from different mammalian species. Avian spermatozoa, however, are filiform, limiting their analysis with such systems, which were developed to examine the approximately spherical heads of mammalian sperm cells. To help overcome this, the standardization of staining techniques to be used in computer-assessed light microscopical methods is a priority. The present review discusses these points and describes the sperm morphometric characteristics of several wild and domestic bird species. PMID:27678467

Computer Applications in the Design Process.

ERIC Educational Resources Information Center

Winchip, Susan

Computer Assisted Design (CAD) and Computer Assisted Manufacturing (CAM) are emerging technologies now being used in home economics and interior design applications. A microcomputer in a computer network system is capable of executing computer graphic functions such as three-dimensional modeling, as well as utilizing office automation packages to…

What Are Some Types of Assistive Devices and How Are They Used?

MedlinePlus

... in persons with hearing problems. Cognitive assistance, including computer or electrical assistive devices, can help people function following brain injury. Computer software and hardware, such as voice recognition programs, ...

Comprehensive automatic assessment of retinal vascular abnormalities for computer-assisted retinopathy grading.

PubMed

Joshi, Vinayak; Agurto, Carla; VanNess, Richard; Nemeth, Sheila; Soliz, Peter; Barriga, Simon

2014-01-01

One of the most important signs of systemic disease that presents on the retina is vascular abnormalities such as in hypertensive retinopathy. Manual analysis of fundus images by human readers is qualitative and lacks in accuracy, consistency and repeatability. Present semi-automatic methods for vascular evaluation are reported to increase accuracy and reduce reader variability, but require extensive reader interaction; thus limiting the software-aided efficiency. Automation thus holds a twofold promise. First, decrease variability while increasing accuracy, and second, increasing the efficiency. In this paper we propose fully automated software as a second reader system for comprehensive assessment of retinal vasculature; which aids the readers in the quantitative characterization of vessel abnormalities in fundus images. This system provides the reader with objective measures of vascular morphology such as tortuosity, branching angles, as well as highlights of areas with abnormalities such as artery-venous nicking, copper and silver wiring, and retinal emboli; in order for the reader to make a final screening decision. To test the efficacy of our system, we evaluated the change in performance of a newly certified retinal reader when grading a set of 40 color fundus images with and without the assistance of the software. The results demonstrated an improvement in reader's performance with the software assistance, in terms of accuracy of detection of vessel abnormalities, determination of retinopathy, and reading time. This system enables the reader in making computer-assisted vasculature assessment with high accuracy and consistency, at a reduced reading time.

Effects of Computer-Assisted STAD, LTM and ICI Cooperative Learning Strategies on Nigerian Secondary School Students' Achievement, Gender and Motivation in Physics

ERIC Educational Resources Information Center

Gambrari, Isiaka Amosa; Yusuf, Mudasiru Olalere; Thomas, David Akpa

2015-01-01

This study examined the effectiveness of computer-assisted instruction on Student Team Achievement Division (STAD) and Learning Together Model (LTM) cooperative learning strategies on Nigerian secondary students' achievement and motivation in physics. The efficacy of Authors developed computer assisted instructional package (CAI) for teaching…

The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

ERIC Educational Resources Information Center

Seo, You-Jin; Woo, Honguk

2010-01-01

Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

Development of an Interactive Computer-Based Learning Strategy to Assist in Teaching Water Quality Modelling

ERIC Educational Resources Information Center

Zigic, Sasha; Lemckert, Charles J.

2007-01-01

The following paper presents a computer-based learning strategy to assist in introducing and teaching water quality modelling to undergraduate civil engineering students. As part of the learning strategy, an interactive computer-based instructional (CBI) aid was specifically developed to assist students to set up, run and analyse the output from a…

Effects of Computer-Assisted Instruction on Students' Knowledge of the Self-Determined Learning Model of Instruction and Disruptive Behavior

ERIC Educational Resources Information Center

Mazzotti, Valerie L.; Wood, Charles L.; Test, David W.; Fowler, Catherine H.

2012-01-01

Instruction about goal setting can increase students' self-determination and reduce problem behavior. Computer-assisted instruction could offer teachers another format for teaching goal setting and self-determination. This study used a multiple probes across participants design to examine the effects of computer-assisted instruction on students'…

The New Film Technologies: Computerized Video-Assisted Film Production.

ERIC Educational Resources Information Center

Mott, Donald R.

Over the past few years, video technology has been used to assist film directors after they have shot a scene, to control costs, and to create special effects, especially computer assisted graphics. At present, a computer based editing system called "Film 5" combines computer technology and video tape with film to save as much as 50% of…

A Computer-Assisted Instruction Program for Exercises on Finding Axioms. Technical Report Number 186.

ERIC Educational Resources Information Center

Goldberg, Adele; Suppes, Patrick

An interactive computer-assisted system for teaching elementary logic is described, which was designed to handle formalizations of first-order theories suitable for presentation in a computer-assisted instruction environment. The system provides tools with which the user can develop and then study a nonlogical axiomatic theory along whatever lines…

The Effect of Computer-Assisted Teaching on Remedying Misconceptions: The Case of the Subject "Probability"

ERIC Educational Resources Information Center

Gurbuz, Ramazan; Birgin, Osman

2012-01-01

The aim of this study is to determine the effects of computer-assisted teaching (CAT) on remedying misconceptions students often have regarding some probability concepts in mathematics. Toward this aim, computer-assisted teaching materials were developed and used in the process of teaching. Within the true-experimental research method, a pre- and…

CHEMEX; Understanding and Solving Problems in Chemistry. A Computer-Assisted Instruction Program for General Chemistry.

ERIC Educational Resources Information Center

Lower, Stephen K.

A brief overview of CHEMEX--a problem-solving, tutorial style computer-assisted instructional course--is provided and sample problems are offered. In CHEMEX, students receive problems in advance and attempt to solve them before moving through the computer program, which assists them in overcoming difficulties and serves as a review mechanism.…

Pre-Service Teachers' Uses of and Barriers from Adopting Computer-Assisted Language Learning (CALL) Programs

ERIC Educational Resources Information Center

Samani, Ebrahim; Baki, Roselan; Razali, Abu Bakar

2014-01-01

Success in implementation of computer-assisted language learning (CALL) programs depends on the teachers' understanding of the roles of CALL programs in education. Consequently, it is also important to understand the barriers teachers face in the use of computer-assisted language learning (CALL) programs. The current study was conducted on 14…

Effects of a Computer-Assisted Concept Mapping Learning Strategy on EFL College Students' English Reading Comprehension

ERIC Educational Resources Information Center

Liu, Pei-Lin; Chen, Chiu-Jung; Chang, Yu-Ju

2010-01-01

The purpose of this research was to investigate the effects of a computer-assisted concept mapping learning strategy on EFL college learners' English reading comprehension. The research questions were: (1) what was the influence of the computer-assisted concept mapping learning strategy on different learners' English reading comprehension? (2) did…

Effects of Computer-Assisted STAD, LTM and ICI Cooperative Learning Strategies on Nigerian Secondary School Students' Achievement, Gender and Motivation in Physics

ERIC Educational Resources Information Center

Gambari, Amosa Isiaka; Yusuf, Mudasiru Olalere; Thomas, David Akpa

2015-01-01

This study examined the effectiveness of computer-assisted instruction on Student Team Achievement Division (STAD) and Learning Together (LT) cooperative learning strategies on Nigerian secondary students' achievement and motivation in physics. The effectiveness of computer assisted instructional package (CAI) for teaching physics concepts in…

Do the Effects of Computer-Assisted Practice Differ for Children with Reading Disabilities with and without IQ-Achievement Discrepancy?

ERIC Educational Resources Information Center

Jimenez, Juan E.; Ortiz, Maria del Rosario; Rodrigo, Mercedes; Hernandez-Valle, Isabel; Ramirez, Gustavo; Estevez, Adelina; O'Shanahan, Isabel; Trabaue, Maria de la Luz

2003-01-01

A study assessed whether the effects of computer-assisted practice on visual word recognition differed for 73 Spanish children with reading disabilities with or without aptitude-achievement discrepancy. Computer-assisted intervention improved word recognition. However, children with dyslexia had more difficulties than poor readers during…

Effectiveness of Computer-Assisted Mathematics Education (CAME) over Academic Achievement: A Meta-Analysis Study

ERIC Educational Resources Information Center

Demir, Seda; Basol, Gülsah

2014-01-01

The aim of the current study is to determine the overall effects of Computer-Assisted Mathematics Education (CAME) on academic achievement. After an extensive review of the literature, studies using Turkish samples and observing the effects of Computer-Assisted Education (CAE) on mathematics achievement were examined. As a result of this…

Applications of NLP Techniques to Computer-Assisted Authoring of Test Items for Elementary Chinese

ERIC Educational Resources Information Center

Liu, Chao-Lin; Lin, Jen-Hsiang; Wang, Yu-Chun

2010-01-01

The authors report an implemented environment for computer-assisted authoring of test items and provide a brief discussion about the applications of NLP techniques for computer assisted language learning. Test items can serve as a tool for language learners to examine their competence in the target language. The authors apply techniques for…

Errors and Intelligence in Computer-Assisted Language Learning: Parsers and Pedagogues. Routledge Studies in Computer Assisted Language Learning

ERIC Educational Resources Information Center

Heift, Trude; Schulze, Mathias

2012-01-01

This book provides the first comprehensive overview of theoretical issues, historical developments and current trends in ICALL (Intelligent Computer-Assisted Language Learning). It assumes a basic familiarity with Second Language Acquisition (SLA) theory and teaching, CALL and linguistics. It is of interest to upper undergraduate and/or graduate…

Computers for Your Classroom: CAI and CMI.

ERIC Educational Resources Information Center

Thomas, David B.; Bozeman, William C.

1981-01-01

The availability of compact, low-cost computer systems provides a means of assisting classroom teachers in the performance of their duties. Computer-assisted instruction (CAI) and computer-managed instruction (CMI) are two applications of computer technology with which school administrators should become familiar. CAI is a teaching medium in which…

The Effect of Computer Assisted and Computer Based Teaching Methods on Computer Course Success and Computer Using Attitudes of Students

ERIC Educational Resources Information Center

Tosun, Nilgün; Suçsuz, Nursen; Yigit, Birol

2006-01-01

The purpose of this research was to investigate the effects of the computer-assisted and computer-based instructional methods on students achievement at computer classes and on their attitudes towards using computers. The study, which was completed in 6 weeks, were carried out with 94 sophomores studying in formal education program of Primary…

Pruning a decision tree for selecting computer-related assistive devices for people with disabilities.

PubMed

Chi, Chia-Fen; Tseng, Li-Kai; Jang, Yuh

2012-07-01

Many disabled individuals lack extensive knowledge about assistive technology, which could help them use computers. In 1997, Denis Anson developed a decision tree of 49 evaluative questions designed to evaluate the functional capabilities of the disabled user and choose an appropriate combination of assistive devices, from a selection of 26, that enable the individual to use a computer. In general, occupational therapists guide the disabled users through this process. They often have to go over repetitive questions in order to find an appropriate device. A disabled user may require an alphanumeric entry device, a pointing device, an output device, a performance enhancement device, or some combination of these. Therefore, the current research eliminates redundant questions and divides Anson's decision tree into multiple independent subtrees to meet the actual demand of computer users with disabilities. The modified decision tree was tested by six disabled users to prove it can determine a complete set of assistive devices with a smaller number of evaluative questions. The means to insert new categories of computer-related assistive devices was included to ensure the decision tree can be expanded and updated. The current decision tree can help the disabled users and assistive technology practitioners to find appropriate computer-related assistive devices that meet with clients' individual needs in an efficient manner.

Pavement-Transportation Computer Assisted Structural Engineering (PCASE) Implementation of the Modified Berggren (ModBerg) Equation for Computing the Frost Penetration Depth within Pavement Structures

DTIC Science & Technology

2012-04-01

ER D C/ G SL T R -1 2 -1 5 Pavement -Transportation Computer Assisted Structural Engineering (PCASE) Implementation of the Modified...Berggren (ModBerg) Equation for Computing the Frost Penetration Depth within Pavement Structures G eo te ch n ic al a n d S tr u ct u re s La b or at...April 2012 Pavement -Transportation Computer Assisted Structural Engineering (PCASE) Implementation of the Modified Berggren (ModBerg) Equation for

Brain-controlled body movement assistance devices and methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leuthardt, Eric C.; Love, Lonnie J.; Coker, Rob

Methods, devices, systems, and apparatus, including computer programs encoded on a computer storage medium, for brain-controlled body movement assistance devices. In one aspect, a device includes a brain-controlled body movement assistance device with a brain-computer interface (BCI) component adapted to be mounted to a user, a body movement assistance component operably connected to the BCI component and adapted to be worn by the user, and a feedback mechanism provided in connection with at least one of the BCI component and the body movement assistance component, the feedback mechanism being configured to output information relating to a usage session of themore » brain-controlled body movement assistance device.« less

Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Insolia, Gerard

This document contains course outlines in computer-aided manufacturing developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The four units of the course cover the following: (1) introduction to computer-assisted design (CAD)/computer-assisted manufacturing (CAM); (2) CAM…

Pedicle screw placement using image guided techniques.

PubMed

Merloz, P; Tonetti, J; Pittet, L; Coulomb, M; Lavalleé, S; Sautot, P

1998-09-01

Clinical evaluation of a computer assisted spine surgical system is presented. Eighty pedicle screws were inserted using computer assisted technology in thoracic and lumbar vertebrae for treatment of different types of disorders including fractures, spondylolisthesis, and scoliosis. Fifty-two patients with severe fractures, spondylolisthesis, or pseudoarthrosis of T10 to L5 were treated using a computer assisted technique on 1/2 the patients and performing the screw insertion manually for the other 1/2. At the same time, 28 pedicle screws were inserted in T12 to L4 vertebrae for scoliosis with the help of the computer assisted technique. Surgery was followed in all cases (66 vertebrae; 132 pedicle screws) by postoperative radiographs and computed tomographic examination, on which measurements of screw position relative to pedicle position could be done. For fractures, spondylolisthesis, or pseudarthrosis, comparison between the two groups showed that four screws in 52 (8%) vertebrae had incorrect placement with computer assisted technique whereas 22 screws in 52 (42%) vertebrae had incorrect placement with manual insertion. In patients with scoliosis, four screws in 28 (14%) vertebrae had incorrect placement. In all of the patients (132 pedicle screws) there were no neurologic complications. These results show that a computer assisted technique is much more accurate and safe than manual insertion.

The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

ERIC Educational Resources Information Center

Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

2016-01-01

This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

Estimated Prevalence of the Target Population for Brain-Computer Interface Neurotechnology in the Netherlands.

PubMed

Pels, Elmar G M; Aarnoutse, Erik J; Ramsey, Nick F; Vansteensel, Mariska J

2017-07-01

People who suffer from paralysis have difficulties participating in society. Particularly burdensome is the locked-in syndrome (LIS). LIS patients are not able to move and speak but are cognitively healthy. They rely on assistive technology to interact with the world and may benefit from neurotechnological advances. Optimal research and design of such aids requires a well-defined target population. However, the LIS population is poorly characterized and the number of patients in this condition is unknown. Here we estimated and described the LIS patient population in the Netherlands to define the target population for assistive (neuro)technology. We asked physicians in the Netherlands if they had patients suffering from severe paralysis and communication problems in their files. Physicians responding affirmatively were asked to fill out a questionnaire on the patients' status. We sent out 9570 letters to general practitioners (GPs), who reported 83 patients. After first screening, the GPs of 46 patients received the questionnaire. Based on the responses, 26 patients were classified as having LIS. Extrapolation of these numbers resulted in a prevalence of 0.73 patients per 100 000 inhabitants. Notable results from the questionnaire were the percentage of patients with neuromuscular disease (>50%) and living at home (>70%). We revealed an etiologically diverse group of LIS patients. The functioning and needs of these patients were, however, similar and many relied on assistive technology. By characterizing the LIS population, our study may contribute to optimal development of assistive (neuro)technology.

Design of Intelligent Robot as A Tool for Teaching Media Based on Computer Interactive Learning and Computer Assisted Learning to Improve the Skill of University Student

NASA Astrophysics Data System (ADS)

Zuhrie, M. S.; Basuki, I.; Asto B, I. G. P.; Anifah, L.

2018-01-01

The focus of the research is the teaching module which incorporates manufacturing, planning mechanical designing, controlling system through microprocessor technology and maneuverability of the robot. Computer interactive and computer-assisted learning is strategies that emphasize the use of computers and learning aids (computer assisted learning) in teaching and learning activity. This research applied the 4-D model research and development. The model is suggested by Thiagarajan, et.al (1974). 4-D Model consists of four stages: Define Stage, Design Stage, Develop Stage, and Disseminate Stage. This research was conducted by applying the research design development with an objective to produce a tool of learning in the form of intelligent robot modules and kit based on Computer Interactive Learning and Computer Assisted Learning. From the data of the Indonesia Robot Contest during the period of 2009-2015, it can be seen that the modules that have been developed confirm the fourth stage of the research methods of development; disseminate method. The modules which have been developed for students guide students to produce Intelligent Robot Tool for Teaching Based on Computer Interactive Learning and Computer Assisted Learning. Results of students’ responses also showed a positive feedback to relate to the module of robotics and computer-based interactive learning.

45 CFR 233.24 - Retrospective budgeting; determining eligibility and computing the assistance payment in the...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 2 2013-10-01 2012-10-01 true Retrospective budgeting; determining eligibility and computing the assistance payment in the initial one or two months. 233.24 Section 233.24 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS...

45 CFR 233.24 - Retrospective budgeting; determining eligibility and computing the assistance payment in the...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Retrospective budgeting; determining eligibility and computing the assistance payment in the initial one or two months. 233.24 Section 233.24 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS...

45 CFR 233.25 - Retrospective budgeting; computing the assistance payment after the initial one or two months.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Retrospective budgeting; computing the assistance payment after the initial one or two months. 233.25 Section 233.25 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN AND...

45 CFR 233.25 - Retrospective budgeting; computing the assistance payment after the initial one or two months.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 2 2013-10-01 2012-10-01 true Retrospective budgeting; computing the assistance payment after the initial one or two months. 233.25 Section 233.25 Public Welfare Regulations Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN AND...

Teaching Sight Words to Elementary Students with Intellectual Disability and Autism: A Comparison of Teacher-Directed versus Computer-Assisted Simultaneous Prompting

ERIC Educational Resources Information Center

Coleman, Mari Beth; Cherry, Rebecca A.; Moore, Tara C.; Yujeong, Park; Cihak, David F.

2015-01-01

The purpose of this study was to compare the effects of teacher-directed simultaneous prompting to computer-assisted simultaneous prompting for teaching sight words to 3 elementary school students with intellectual disability. Activities in the computer-assisted condition were designed with Intellitools Classroom Suite software whereas traditional…

Computer-assisted diagnostic decision support: history, challenges, and possible paths forward.

PubMed

Miller, Randolph A

2009-09-01

This paper presents a brief history of computer-assisted diagnosis, including challenges and future directions. Some ideas presented in this article on computer-assisted diagnostic decision support systems (CDDSS) derive from prior work by the author and his colleagues (see list in Acknowledgments) on the INTERNIST-1 and QMR projects. References indicate the original sources of many of these ideas.

Computer-Assisted Instruction in Statistics. Technical Report.

ERIC Educational Resources Information Center

Cooley, William W.

A paper given at a conference on statistical computation discussed teaching statistics with computers. It concluded that computer-assisted instruction is most appropriately employed in the numerical demonstration of statistical concepts, and for statistical laboratory instruction. The student thus learns simultaneously about the use of computers…

What's New in Software? Current Sources of Information Boost Effectiveness of Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Ellsworth, Nancy J.

1990-01-01

This article reviews current resources on computer-assisted instruction. Included are sources of software and hardware evaluations, advances in current technology, research, an information hotline, and inventories of available technological assistance. (DB)

Usefulness of hemocytometer as a counting chamber in a computer assisted sperm analyzer (CASA)

USGS Publications Warehouse

Eljarah, A.; Chandler, J.; Jenkins, J.A.; Chenevert, J.; Alcanal, A.

2013-01-01

Several methods are used to determine sperm cell concentration, such as the haemocytometer, spectrophotometer, electronic cell counter and computer-assisted semen analysers (CASA). The utility of CASA systems has been limited due to the lack of characterization of individual systems and the absence of standardization among laboratories. The aims of this study were to: 1) validate and establish setup conditions for the CASA system utilizing the haemocytometer as a counting chamber, and 2) compare the different methods used for the determination of sperm cell concentration in bull semen. Two ejaculates were collected and the sperm cell concentration was determined using spectrophotometer and haemocytometer. For the Hamilton-Thorn method, the haemocytometer was used as a counting chamber. Sperm concentration was determined three times per ejaculate samples. A difference (P 0.05) or between the haemocytometer count and the spectrophotometer. Based on the results of this study, we concluded that the haemocytometer can be used in computerized semen analysis systems as a substitute for the commercially available disposable counting chambers, therefore avoiding disadvantageous high costs and slower procedures.

Bio-Inspired Controller on an FPGA Applied to Closed-Loop Diaphragmatic Stimulation

PubMed Central

Zbrzeski, Adeline; Bornat, Yannick; Hillen, Brian; Siu, Ricardo; Abbas, James; Jung, Ranu; Renaud, Sylvie

2016-01-01

Cervical spinal cord injury can disrupt connections between the brain respiratory network and the respiratory muscles which can lead to partial or complete loss of ventilatory control and require ventilatory assistance. Unlike current open-loop technology, a closed-loop diaphragmatic pacing system could overcome the drawbacks of manual titration as well as respond to changing ventilation requirements. We present an original bio-inspired assistive technology for real-time ventilation assistance, implemented in a digital configurable Field Programmable Gate Array (FPGA). The bio-inspired controller, which is a spiking neural network (SNN) inspired by the medullary respiratory network, is as robust as a classic controller while having a flexible, low-power and low-cost hardware design. The system was simulated in MATLAB with FPGA-specific constraints and tested with a computational model of rat breathing; the model reproduced experimentally collected respiratory data in eupneic animals. The open-loop version of the bio-inspired controller was implemented on the FPGA. Electrical test bench characterizations confirmed the system functionality. Open and closed-loop paradigm simulations were simulated to test the FPGA system real-time behavior using the rat computational model. The closed-loop system monitors breathing and changes in respiratory demands to drive diaphragmatic stimulation. The simulated results inform future acute animal experiments and constitute the first step toward the development of a neuromorphic, adaptive, compact, low-power, implantable device. The bio-inspired hardware design optimizes the FPGA resource and time costs while harnessing the computational power of spike-based neuromorphic hardware. Its real-time feature makes it suitable for in vivo applications. PMID:27378844

[Evaluation of cardiac tumors by multidetector computed tomography and magnetic resonance imaging].

PubMed

Mercado-Guzman, Marcela P; Meléndez-Ramírez, Gabriela; Castillo-Castellon, Francisco; Kimura-Hayama, Eric

Cardiac tumors, are a rare pathology (0.002-0.3%) in all age groups, however, they have a clinic importance, due the affected organ. They are classified in primary (benign or malignant) and secondary (metastasis) types. Among primary type, mixoma, is the most common benign tumor, and sarcoma represents most of the malignant injuries. Cardiac metastasis are more frequent than primary tumors. Clinic effects of cardiac tumors are unspecific and vary according their location, size and agresivity. The use of Multidetector Computed Tomography (MDCT) and Magnetic Resonance Imaging (MRI) assist on the location, sizing, anatomical relationships and the compromise of adyacents structures, besides, MRI is useful for tissue characterization of the tumor. Due to the previous reasons, studies based on noninvasive cardiovascular imaging, have an important role on the characterization of these lesions and the differential diagnosis among them. Copyright © 2016 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Computational fluid dynamics assisted characterization of parafoveal hemodynamics in normal and diabetic eyes using adaptive optics scanning laser ophthalmoscopy.

PubMed

Lu, Yang; Bernabeu, Miguel O; Lammer, Jan; Cai, Charles C; Jones, Martin L; Franco, Claudio A; Aiello, Lloyd Paul; Sun, Jennifer K

2016-12-01

Diabetic retinopathy (DR) is the leading cause of visual loss in working-age adults worldwide. Previous studies have found hemodynamic changes in the diabetic eyes, which precede clinically evident pathological alterations of the retinal microvasculature. There is a pressing need for new methods to allow greater understanding of these early hemodynamic changes that occur in DR. In this study, we propose a noninvasive method for the assessment of hemodynamics around the fovea (a region of the eye of paramount importance for vision). The proposed methodology combines adaptive optics scanning laser ophthalmoscopy and computational fluid dynamics modeling. We compare results obtained with this technique with in vivo measurements of blood flow based on blood cell aggregation tracking. Our results suggest that parafoveal hemodynamics, such as capillary velocity, wall shear stress, and capillary perfusion pressure can be noninvasively and reliably characterized with this method in both healthy and diabetic retinopathy patients.

Computational fluid dynamics assisted characterization of parafoveal hemodynamics in normal and diabetic eyes using adaptive optics scanning laser ophthalmoscopy

PubMed Central

Lu, Yang; Bernabeu, Miguel O.; Lammer, Jan; Cai, Charles C.; Jones, Martin L.; Franco, Claudio A.; Aiello, Lloyd Paul; Sun, Jennifer K.

2016-01-01

Diabetic retinopathy (DR) is the leading cause of visual loss in working-age adults worldwide. Previous studies have found hemodynamic changes in the diabetic eyes, which precede clinically evident pathological alterations of the retinal microvasculature. There is a pressing need for new methods to allow greater understanding of these early hemodynamic changes that occur in DR. In this study, we propose a noninvasive method for the assessment of hemodynamics around the fovea (a region of the eye of paramount importance for vision). The proposed methodology combines adaptive optics scanning laser ophthalmoscopy and computational fluid dynamics modeling. We compare results obtained with this technique with in vivo measurements of blood flow based on blood cell aggregation tracking. Our results suggest that parafoveal hemodynamics, such as capillary velocity, wall shear stress, and capillary perfusion pressure can be noninvasively and reliably characterized with this method in both healthy and diabetic retinopathy patients. PMID:28078170

The Talent Development Middle School. An Elective Replacement Approach to Providing Extra Help in Math--The CATAMA Program (Computer- and Team-Assisted Mathematics Acceleration). Report No. 21.

ERIC Educational Resources Information Center

Mac Iver, Douglas J.; Balfanz, Robert; Plank, Stephen B.

In Talent Development Middle Schools, students needing extra help in mathematics participate in the Computer- and Team-Assisted Mathematics Acceleration (CATAMA) course. CATAMA is an innovative combination of computer-assisted instruction and structured cooperative learning that students receive in addition to their regular math course for about…

A Randomized Rounding Approach for Optimization of Test Sheet Composing and Exposure Rate Control in Computer-Assisted Testing

ERIC Educational Resources Information Center

Wang, Chu-Fu; Lin, Chih-Lung; Deng, Jien-Han

2012-01-01

Testing is an important stage of teaching as it can assist teachers in auditing students' learning results. A good test is able to accurately reflect the capability of a learner. Nowadays, Computer-Assisted Testing (CAT) is greatly improving traditional testing, since computers can automatically and quickly compose a proper test sheet to meet user…

Auger recombination in sodium iodide

NASA Astrophysics Data System (ADS)

McAllister, Andrew; Kioupakis, Emmanouil; Åberg, Daniel; Schleife, André

2014-03-01

Scintillators are an important tool used to detect high energy radiation - both in the interest of national security and in medicine. However, scintillator detectors currently suffer from lower energy resolutions than expected from basic counting statistics. This has been attributed to non-proportional light yield compared to incoming radiation, but the specific mechanism for this non-proportionality has not been identified. Auger recombination is a non-radiative process that could be contributing to the non-proportionality of scintillating materials. Auger recombination comes in two types - direct and phonon-assisted. We have used first-principles calculations to study Auger recombination in sodium iodide, a well characterized scintillating material. Our findings indicate that phonon-assisted Auger recombination is stronger in sodium iodide than direct Auger recombination. Computational resources provided by LLNL and NERSC. Funding provided by NA-22.

District Computer Concerns: Checklist for Monitoring Instructional Use of Computers.

ERIC Educational Resources Information Center

Coe, Merilyn

Designed to assist those involved with planning, organizing, and implementing computer use in schools, this checklist can be applied to: (1) assess the present state of instructional computer use in the district; (2) assist with the development of plans or guidelines for computer use; (3) support a start-up phase; and (4) monitor the…

SuperPILOT: A Comprehensive Computer-Assisted Instruction Programming Language for the Apple II Computer.

ERIC Educational Resources Information Center

Falleur, David M.

This presentation describes SuperPILOT, an extended version of Apple PILOT, a programming language for developing computer-assisted instruction (CAI) with the Apple II computer that includes the features of its early PILOT (Programmed Inquiry, Learning or Teaching) ancestors together with new features that make use of the Apple computer's advanced…

The Nature of Computer Assisted Learning.

ERIC Educational Resources Information Center

Whiting, John

Computer assisted learning (CAL) is an old technology which has generated much new interest. Computers can: reduce data to a directly comprehensible form; reduce administration; communicate worldwide and exchange, store, and retrieve data; and teach. The computer's limitation is in its dependence on the user's ability and perceptive nature.…

Role of Computer Assisted Instruction (CAI) in an Introductory Computer Concepts Course.

ERIC Educational Resources Information Center

Skudrna, Vincent J.

1997-01-01

Discusses the role of computer assisted instruction (CAI) in undergraduate education via a survey of related literature and specific applications. Describes an undergraduate computer concepts course and includes appendices of instructions, flowcharts, programs, sample student work in accounting, COBOL instructional model, decision logic in a…

Color in Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Steinberg, Esther R.

Color monitors are in wide use in computer systems. Thus, it is important to understand how to apply color effectively in computer assisted instruction (CAI) and computer based training (CBT). Color can enhance learning, but it does not automatically do so. Indiscriminate application of color can mislead a student and thereby even interfere with…

Oral and maxillofacial surgery with computer-assisted navigation system.

PubMed

Kawachi, Homare; Kawachi, Yasuyuki; Ikeda, Chihaya; Takagi, Ryo; Katakura, Akira; Shibahara, Takahiko

2010-01-01

Intraoperative computer-assisted navigation has gained acceptance in maxillofacial surgery with applications in an increasing number of indications. We adapted a commercially available wireless passive marker system which allows calibration and tracking of virtually every instrument in maxillofacial surgery. Virtual computer-generated anatomical structures are displayed intraoperatively in a semi-immersive head-up display. Continuous observation of the operating field facilitated by computer assistance enables surgical navigation in accordance with the physician's preoperative plans. This case report documents the potential for augmented visualization concepts in surgical resection of tumors in the oral and maxillofacial region. We report a case of T3N2bM0 carcinoma of the maxillary gingival which was surgically resected with the assistance of the Stryker Navigation Cart System. This system was found to be useful in assisting preoperative planning and intraoperative monitoring.

Computer-assisted learning and simulation systems in dentistry--a challenge to society.

PubMed

Welk, A; Splieth, Ch; Wierinck, E; Gilpatrick, R O; Meyer, G

2006-07-01

Computer technology is increasingly used in practical training at universities. However, in spite of their potential, computer-assisted learning (CAL) and computer-assisted simulation (CAS) systems still appear to be underutilized in dental education. Advantages, challenges, problems, and solutions of computer-assisted learning and simulation in dentistry are discussed by means of MEDLINE, open Internet platform searches, and key results of a study among German dental schools. The advantages of computer-assisted learning are seen for example in self-paced and self-directed learning and increased motivation. It is useful for both objective theoretical and practical tests and for training students to handle complex cases. CAL can lead to more structured learning and can support training in evidence-based decision-making. The reasons for the still relatively rare implementation of CAL/CAS systems in dental education include an inability to finance, lack of studies of CAL/CAS, and too much effort required to integrate CAL/CAS systems into the curriculum. To overcome the reasons for the relative low degree of computer technology use, we should strive for multicenter research and development projects monitored by the appropriate national and international scientific societies, so that the potential of computer technology can be fully realized in graduate, postgraduate, and continuing dental education.

Development of a computer-assisted learning software package on dental traumatology.

PubMed

Tolidis, K; Crawford, P; Stephens, C; Papadogiannis, Y; Plakias, C

1998-10-01

The development of computer-assisted learning software packages is a relatively new field of computer application. The progress made in personal computer technology toward more user-friendly operating systems has stimulated the academic community to develop computer-assisted learning for pre- and postgraduate students. The ability of computers to combine audio and visual data in an interactive form provides a powerful educational tool. The purpose of this study was to develop and evaluate a computer-assisted learning package on dental traumatology. This program contains background information on the diagnosis, classification, and management of dental injuries in both the permanent and the deciduous dentitions. It is structured into chapters according to the nature of the injury and whether injury has occurred in the primary or permanent dentition. At the end of each chapter there is a self-assessment questionnaire as well as references to relevant literature. Extensive use of pictures and video provides a comprehensive overview of the subject.

Impact of a computer-assisted Screening, Brief Intervention and Referral to Treatment on reducing alcohol consumption among patients with hazardous drinking disorder in hospital emergency departments. The randomized BREVALCO trial.

PubMed

Duroy, David; Boutron, Isabelle; Baron, Gabriel; Ravaud, Philippe; Estellat, Candice; Lejoyeux, Michel

2016-08-01

To assess the impact of a computer-assisted Screening, Brief Intervention, and Referral to Treatment (SBIRT) on daily consumption of alcohol by patients with hazardous drinking disorder detected after systematic screening during their admission to an emergency department (ED). Two-arm, parallel group, multicentre, randomized controlled trial with a centralised computer-generated randomization procedure. Four EDs in university hospitals located in the Paris area in France. Patients admitted in the ED for any reason, with hazardous drinking disorder detected after systematic screening (i.e., Alcohol Use Disorder Identification Test score ≥5 for women and 8 for men OR self-reported alcohol consumption by week ≥7 drinks for women and 14 for men). The experimental intervention was computer-assisted SBIRT and the comparator was a placebo-controlled intervention (i.e., a computer-assisted education program on nutrition). Interventions were administered in the ED and followed by phone reinforcements at 1 and 3 months. The primary outcome was the mean number of alcohol drinks per day in the previous week, at 12 months. Results From May 2005 to February 2011, 286 patients were randomized to the computer-assisted SBIRT and 286 to the comparator intervention. The two groups did not differ in the primary outcome, with an adjusted mean difference of 0.12 (95% confidence interval, -0.88 to 1.11). There was no additional benefit of the computer-assisted alcohol SBIRT as compared with the computer-assisted education program on nutrition among patients with hazardous drinking disorder detected by systematic screening during their admission to an ED. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Computer-assisted surgery and intraoral welding technique for immediate implant-supported rehabilitation of the edentulous maxilla: case report and technical description.

PubMed

Albiero, Alberto Maria; Benato, Renato

2016-09-01

Complications are frequently reported when combining computer assisted flapless surgery with an immediate loaded prefabricated prosthesis. The authors have combined computer-assisted surgery with the intraoral welding technique to obtain a precise passive fit of the immediate loading prosthesis. An edentulous maxilla was rehabilitated with four computer assisted implants welded together intraorally and immediately loaded with a provisional restoration. A perfect passive fit of the metal framework was obtained that enabled proper osseointegration of implants. Computer assisted preoperative planning has been shown to be effective in reducing the intraoperative time of the intraoral welding technique. No complications were observed at 1 year follow-up. This guided-welded approach is useful to achieve a passive fit of the provisional prosthesis on the inserted implants the same day as the surgery, reducing intraoperative time with respect to the traditional intraoral welding technique. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Computer Assistance in Information Work. Part I: Conceptual Framework for Improving the Computer/User Interface in Information Work. Part II: Catalog of Acceleration, Augmentation, and Delegation Functions in Information Work.

ERIC Educational Resources Information Center

Paisley, William; Butler, Matilda

This study of the computer/user interface investigated the role of the computer in performing information tasks that users now perform without computer assistance. Users' perceptual/cognitive processes are to be accelerated or augmented by the computer; a long term goal is to delegate information tasks entirely to the computer. Cybernetic and…

Whole-genome CNV analysis: advances in computational approaches.

PubMed

Pirooznia, Mehdi; Goes, Fernando S; Zandi, Peter P

2015-01-01

Accumulating evidence indicates that DNA copy number variation (CNV) is likely to make a significant contribution to human diversity and also play an important role in disease susceptibility. Recent advances in genome sequencing technologies have enabled the characterization of a variety of genomic features, including CNVs. This has led to the development of several bioinformatics approaches to detect CNVs from next-generation sequencing data. Here, we review recent advances in CNV detection from whole genome sequencing. We discuss the informatics approaches and current computational tools that have been developed as well as their strengths and limitations. This review will assist researchers and analysts in choosing the most suitable tools for CNV analysis as well as provide suggestions for new directions in future development.

The Effect of the Usage of Computer-Based Assistive Devices on the Functioning and Quality of Life of Individuals Who Are Blind or Have Low Vision

ERIC Educational Resources Information Center

Rosner, Yotam; Perlman, Amotz

2018-01-01

Introduction: The Israel Ministry of Social Affairs and Social Services subsidizes computer-based assistive devices for individuals with visual impairments (that is, those who are blind or have low vision) to assist these individuals in their interactions with computers and thus to enhance their independence and quality of life. The aim of this…

Adult Literacy Learning and Computer Technology: Features of Effective Computer-Assisted Learning Systems.

ERIC Educational Resources Information Center

Fahy, Patrick J.

Computer-assisted learning (CAL) can be used for adults functioning at any academic or grade level. In adult basic education (ABE), CAL can promote greater learning effectiveness and faster progress, concurrent learning and experience with computer literacy skills, privacy, and motivation. Adults who face barriers (financial, geographic, personal,…

The Evolution of Computer Based Learning Software Design: Computer Assisted Teaching Unit Experience.

ERIC Educational Resources Information Center

Blandford, A. E.; Smith, P. R.

1986-01-01

Describes the style of design of computer simulations developed by Computer Assisted Teaching Unit at Queen Mary College with reference to user interface, input and initialization, input data vetting, effective display screen use, graphical results presentation, and need for hard copy. Procedures and problems relating to academic involvement are…

Interactive Computer-Assisted Instruction in Acid-Base Physiology for Mobile Computer Platforms

ERIC Educational Resources Information Center

Longmuir, Kenneth J.

2014-01-01

In this project, the traditional lecture hall presentation of acid-base physiology in the first-year medical school curriculum was replaced by interactive, computer-assisted instruction designed primarily for the iPad and other mobile computer platforms. Three learning modules were developed, each with ~20 screens of information, on the subjects…

RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

ERIC Educational Resources Information Center

Stewart, John Christopher

Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

THE COMPUTER AS AN AID TO INSTRUCTION AND GUIDANCE IN THE SCHOOL.

ERIC Educational Resources Information Center

IMPELLITTERI, JOSEPH T.

COMPUTER APPLICATIONS IN EDUCATION ARE DISCUSSED IN TERMS OF--(1) A DESCRIPTION OF COMPUTER-ASSISTED INSTRUCTION (CAI) AND COUNSELING, (2) THE NUMBER AND TYPES OF COMPUTER-ASSISTED DEVELOPMENTS, (3) THE NATURE OF THE PENN STATE UNIVERSITY PROGRAM, (4) TENTATIVE RESULTS OF EXPERIMENTATION USING CAI, AND (5) IMPLICATIONS AND PROJECTIONS FOR THE…

The application of computer assisted technologies (CAT) in the rehabilitation of cognitive functions in psychiatric disorders of childhood and adolescence.

PubMed

Srebnicki, Tomasz; Bryńska, Anita

2016-01-01

First applications of computer-assisted technologies (CAT) in the rehabilitation of cognitive deficits, including child and adolescent psychiatric disorders date back to the 80's last century. Recent developments in computer technologies, wide access to the Internet and vast expansion of electronic devices resulted in dynamic increase in therapeutic software as well as supporting devices. The aim of computer assisted technologies is the improvement in the comfort and quality of life as well as the rehabilitation of impaired functions. The goal of the article is the presentation of most common computer-assisted technologies used in the therapy of children and adolescents with cognitive deficits as well as the literature review of their effectiveness including the challenges and limitations in regard to the implementation of such interventions.

Computers Launch Faster, Better Job Matching

ERIC Educational Resources Information Center

Stevenson, Gloria

1976-01-01

Employment Security Automation Project (ESAP), a five-year program sponsored by the Employment and Training Administration, features an innovative computer-assisted job matching system and instantaneous computer-assisted service for unemployment insurance claimants. ESAP will also consolidate existing automated employment security systems to…

Comparison of fluid dynamic numerical models for a clinical ventricular assist device and experimental validation

PubMed Central

Zhang, Jiafeng; Zhang, Pei; Fraser, Katharine H.; Griffith, Bartley P.; Wu, Zhongjun J.

2012-01-01

With the recent advances in computer technology, computational fluid dynamics (CFD) has become an important tool to design and improve blood contacting artificial organs, and to study the device-induced blood damage. Commercial CFD software packages are readily available, and multiple CFD models are provided by CFD software developers. However, the best approach of using CFD effectively to characterize fluid flow and to predict blood damage in these medical devices remains debatable. This study aimed to compare these CFD models and provide useful information on the accuracy of each model in modeling blood flow in circulatory assist devices. The laminar and five turbulence models (Spalart-Allmaras, k-ε (k-epsilon), k-ω (k-omega), SST (Menter’s Shear Stress Transport), and Reynolds Stress) were implemented to predict blood flow in a clinically used circulatory assist device, CentriMag® centrifugal blood pump (Thoratec, MA). In parallel, a transparent replica of the CentriMag® pump was constructed and selected views of the flow fields were measured with digital particle image velocimetry (DPIV). CFD results were compared with the DPIV experimental results. Compared with the experiment, all the selected CFD models predicted the flow pattern fairly well except the area of the outlet. However, quantitatively, the laminar model results were the most deviated from the experimental data. On the other hand, k-ε RNG models and Reynolds Stress model are the most accurate. In conclusion, for the circulatory assist devices, turbulence models provide more accurate results than laminar model. Among the selected turbulence models, k-ε and Reynolds Stress Method models are recommended. PMID:23441681

A Reading Skills Development Program for Adult Non-Readers. Featuring: Supplementary Graphics and Sound (Voice Tutorials). Volumes 1 and 2. The TRS-80 Computer Assisted Instruction Series for Adult Basic Education Students.

ERIC Educational Resources Information Center

San Antonio State Hospital, TX. Office of Education Services.

This instructional manual consists of materials for use in implementing a computer-assisted instructional program in reading skills development for adult nonreaders. Discussed first are the project during which this instructional program and manual were developed and the goals of the computer-assisted beginning reading program, a major feature of…

Competency Reference for Computer Assisted Drafting.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Technical Education.

This guide, developed in Oregon, lists competencies essential for students in computer-assisted drafting (CAD). Competencies are organized in eight categories: computer hardware, file usage and manipulation, basic drafting techniques, mechanical drafting, specialty disciplines, three dimensional drawing/design, plotting/printing, and advanced CAD.…

The Role of Academic Computer Departments in the Uses of Computers in the Undergraduate Curricula at the Two-Year College Level.

ERIC Educational Resources Information Center

Little, Joyce Currie

Academic computer departments, whether called by this name or by others such as the department of computer science or data programing, can be of great assistance to other departments in the two-year college. Faculty in other departments need to know about computer applications in their fields, require assistance in the development of curriculum…

The Application of Learning Styles to Computer Assisted Instruction in Nursing Education

DTIC Science & Technology

1991-01-01

nursing profession is to integrate computer technology into the learning process at all levels of nursing education . In order to successfully accomplish... learning styles. * Computer technology needs to be integrated into nursing education , research and practice. * * An evaluation tool needs to be...Computer-assisted video instruction Learning Styles and CAI 71 References Aiken, E. (1990). Continuing nursing education in computer technology : A regional

Computer-assisted Behavioral Therapy and Contingency Management for Cannabis Use Disorder

PubMed Central

Budney, Alan J.; Stanger, Catherine; Tilford, J. Mick; Scherer, Emily; Brown, Pamela C.; Li, Zhongze; Li, Zhigang; Walker, Denise

2015-01-01

Computer-assisted behavioral treatments hold promise for enhancing access to and reducing costs of treatments for substance use disorders. This study assessed the efficacy of a computer-assisted version of an efficacious, multicomponent treatment for cannabis use disorders (CUD), i.e., motivational enhancement therapy, cognitive-behavioral therapy, and abstinence-based contingency-management (MET/CBT/CM). An initial cost comparison was also performed. Seventy-five adult participants, 59% African Americans, seeking treatment for CUD received either, MET only (BRIEF), therapist-delivered MET/CBT/CM (THERAPIST), or computer-delivered MET/CBT/CM (COMPUTER). During treatment, the THERAPIST and COMPUTER conditions engendered longer durations of continuous cannabis abstinence than BRIEF (p < .05), but did not differ from each other. Abstinence rates and reduction in days of use over time were maintained in COMPUTER at least as well as in THERAPIST. COMPUTER averaged approximately $130 (p < .05) less per case than THERAPIST in therapist costs, which offset most of the costs of CM. Results add to promising findings that illustrate potential for computer-assisted delivery methods to enhance access to evidence-based care, reduce costs, and possibly improve outcomes. The observed maintenance effects and the cost findings require replication in larger clinical trials. PMID:25938629

13 CFR 107.1520 - How a Licensee computes and allocates Prioritized Payments to SBA.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How a Licensee computes and allocates Prioritized Payments to SBA. 107.1520 Section 107.1520 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES SBA Financial Assistance for Licensees...

Computer-Assisted Reading Intervention in a Secondary School: An Evaluation Study.

ERIC Educational Resources Information Center

Lynch, Lisa; Fawcett, Angela J.; Nicolson, Roderick I.

2000-01-01

RITA (Reader's Interactive Teaching Assistant) is a computer-based literacy support system that assists, rather than replaces, the teacher in providing support tailored to each child's profile of reading attainments. This study evaluated the effectiveness of RITA in secondary school with 8 children having very seriously disadvantaged literacy…

Combustion Characterization and Model Fuel Development for Micro-tubular Flame-assisted Fuel Cells.

PubMed

Milcarek, Ryan J; Garrett, Michael J; Baskaran, Amrish; Ahn, Jeongmin

2016-10-02

Combustion based power generation has been accomplished for many years through a number of heat engine systems. Recently, a move towards small scale power generation and micro combustion as well as development in fuel cell research has created new means of power generation that combine solid oxide fuel cells with open flames and combustion exhaust. Instead of relying upon the heat of combustion, these solid oxide fuel cell systems rely on reforming of the fuel via combustion to generate syngas for electrochemical power generation. Procedures were developed to assess the combustion by-products under a wide range of conditions. While theoretical and computational procedures have been developed for assessing fuel-rich combustion exhaust in these applications, experimental techniques have also emerged. The experimental procedures often rely upon a gas chromatograph or mass spectrometer analysis of the flame and exhaust to assess the combustion process as a fuel reformer and means of heat generation. The experimental techniques developed in these areas have been applied anew for the development of the micro-tubular flame-assisted fuel cell. The protocol discussed in this work builds on past techniques to specify a procedure for characterizing fuel-rich combustion exhaust and developing a model fuel-rich combustion exhaust for use in flame-assisted fuel cell testing. The development of the procedure and its applications and limitations are discussed.

Computer-Assisted Instruction in the Context of the Advanced Instructional System: Authoring Support Software. Final Report.

ERIC Educational Resources Information Center

Montgomery, Ann D.; Judd, Wilson A.

This report details the design, development, and implementation of computer software to support the cost-effective production of computer assisted instruction (CAI) within the context of the Advanced Instructional System (AIS) located at Lowry Air Force Base. The report supplements the computer managed Air Force technical training that is…

The Effects of Computer Assisted English Instruction on High School Preparatory Students' Attitudes towards Computers and English

ERIC Educational Resources Information Center

Ates, Alev; Altunay, Ugur; Altun, Eralp

2006-01-01

The aim of this research was to discern the effects of computer assisted English instruction on English language preparatory students' attitudes towards computers and English in a Turkish-medium high school with an intensive English program. A quasi-experimental time series research design, also called "before-after" or "repeated…

Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

The Effectiveness of Computer-Assisted Instruction for Teaching Mathematics to Students with Specific Learning Disability

ERIC Educational Resources Information Center

Stultz, Sherry L.

2013-01-01

Using computers to teach students is not a new idea. Computers have been utilized for educational purposes for over 80 years. However, the effectiveness of these programs for teaching mathematics to students with specific learning disability is unclear. This study was undertaken to determine if computer-assisted instruction was as effective as…

An Annotated Bibliography: A Review of the Literature on Computer Assisted Writing for the College Developmental Educator.

ERIC Educational Resources Information Center

Huard, Susan D.; Malinowski, Patricia A.

Intended for educators on the postsecondary level, this annotated bibliography lists ERIC documents and relevant articles concerning computer assisted instruction. Specifically, it contains citations on the following subjects: (1) the philosophy behind computer usage, (2) general information to help decide whether to use computers in a writing…

Computer-assisted versus non-computer-assisted preoperative planning of corrective osteotomy for extra-articular distal radius malunions: a randomized controlled trial.

PubMed

Leong, Natalie L; Buijze, Geert A; Fu, Eric C; Stockmans, Filip; Jupiter, Jesse B

2010-12-14

Malunion is the most common complication of distal radius fracture. It has previously been demonstrated that there is a correlation between the quality of anatomical correction and overall wrist function. However, surgical correction can be difficult because of the often complex anatomy associated with this condition. Computer assisted surgical planning, combined with patient-specific surgical guides, has the potential to improve pre-operative understanding of patient anatomy as well as intra-operative accuracy. For patients with malunion of the distal radius fracture, this technology could significantly improve clinical outcomes that largely depend on the quality of restoration of normal anatomy. Therefore, the objective of this study is to compare patient outcomes after corrective osteotomy for distal radius malunion with and without preoperative computer-assisted planning and peri-operative patient-specific surgical guides. This study is a multi-center randomized controlled trial of conventional planning versus computer-assisted planning for surgical correction of distal radius malunion. Adult patients with extra-articular malunion of the distal radius will be invited to enroll in our study. After providing informed consent, subjects will be randomized to two groups: one group will receive corrective surgery with conventional preoperative planning, while the other will receive corrective surgery with computer-assisted pre-operative planning and peri-operative patient specific surgical guides. In the computer-assisted planning group, a CT scan of the affected forearm as well as the normal, contralateral forearm will be obtained. The images will be used to construct a 3D anatomical model of the defect and patient-specific surgical guides will be manufactured. Outcome will be measured by DASH and PRWE scores, grip strength, radiographic measurements, and patient satisfaction at 3, 6, and 12 months postoperatively. Computer-assisted surgical planning, combined with patient-specific surgical guides, is a powerful new technology that has the potential to improve the accuracy and consistency of orthopaedic surgery. To date, the role of this technology in upper extremity surgery has not been adequately investigated, and it is unclear whether its use provides any significant clinical benefit over traditional preoperative imaging protocols. Our study will represent the first randomized controlled trial investigating the use of computer assisted surgery in corrective osteotomy for distal radius malunions. NCT01193010.

Simulating Laboratory Procedures.

ERIC Educational Resources Information Center

Baker, J. E.; And Others

1986-01-01

Describes the use of computer assisted instruction in a medical microbiology course. Presents examples of how computer assisted instruction can present case histories in which the laboratory procedures are simulated. Discusses an authoring system used to prepare computer simulations and provides one example of a case history dealing with fractured…

Computer-assisted surgery in the lower jaw: double surgical guide for immediately loaded implants in postextractive sites-technical notes and a case report.

PubMed

De Santis, Daniele; Canton, Luciano Claudio; Cucchi, Alessandro; Zanotti, Guglielmo; Pistoia, Enrico; Nocini, Pier Francesco

2010-01-01

Computer-assisted surgery is based on computerized tomography (CT) scan technology to plan the placement of dental implants and a computer-aided design/computer-aided manufacturing (CAD-CAM) technology to create a custom surgical template. It provides guidance for insertion implants after analysis of existing alveolar bone and planning of implant position, which can be immediately loaded, therefore achieving esthetic and functional results in a surgical stage. The absence of guidelines to treat dentulous areas is often due to a lack of computer-assisted surgery. The authors have attempted to use this surgical methodology to replace residual teeth with an immediate implantoprosthetic restoration. The aim of this case report is to show the possibility of treating a dentulous patient by applying a computer-assisted surgical protocol associated with the use of a double surgical template: one before extraction and a second one after extraction of selected teeth.

Computer assisted surgery in preoperative planning of acetabular fracture surgery: state of the art.

PubMed

Boudissa, Mehdi; Courvoisier, Aurélien; Chabanas, Matthieu; Tonetti, Jérôme

2018-01-01

The development of imaging modalities and computer technology provides a new approach in acetabular surgery. Areas covered: This review describes the role of computer-assisted surgery (CAS) in understanding of the fracture patterns, in the virtual preoperative planning of the surgery and in the use of custom-made plates in acetabular fractures with or without 3D printing technologies. A Pubmed internet research of the English literature of the last 20 years was carried out about studies concerning computer-assisted surgery in acetabular fractures. The several steps for CAS in acetabular fracture surgery are presented and commented by the main author regarding to his personal experience. Expert commentary: Computer-assisted surgery in acetabular fractures is still initial experiences with promising results. Patient-specific biomechanical models considering soft tissues should be developed to allow a more realistic planning.

[The history and development of computer assisted orthopaedic surgery].

PubMed

Jenny, J-Y

2006-10-01

Computer assisted orthopaedic surgery (CAOS) was developed to improve the accuracy of surgical procedures. It has improved dramatically over the last years, being transformed from an experimental, laboratory procedure into a routine procedure theoretically available to every orthopaedic surgeon. The first field of application of computer assistance was neurosurgery. After the application of computer guided spinal surgery, the navigation of total hip and knee joints became available. Currently, several applications for computer assisted surgery are available. At the beginning of navigation, a preoperative CT-scan or several fluoroscopic images were necessary. The imageless systems allow the surgeon to digitize patient anatomy at the beginning of surgery without any preoperative imaging. The future of CAOS remains unknown, but there is no doubt that its importance will grow in the next 10 years, and that this technology will probably modify the conventional practice of orthopaedic surgery.

A Craniomaxillofacial Surgical Assistance Workstation for Enhanced Single-Stage Reconstruction Using Patient-Specific Implants.

PubMed

Murphy, Ryan J; Liacouras, Peter C; Grant, Gerald T; Wolfe, Kevin C; Armand, Mehran; Gordon, Chad R

2016-11-01

Craniomaxillofacial reconstruction with patient-specific, customized craniofacial implants (CCIs) is ideal for skeletal defects involving areas of aesthetic concern-the non-weight-bearing facial skeleton, temporal skull, and/or frontal-forehead region. Results to date are superior to a variety of "off-the-shelf" materials, but require a protocol computed tomography scan and preexisting defect for computer-assisted design/computer-assisted manufacturing of the CCI. The authors developed a craniomaxillofacial surgical assistance workstation to address these challenges and intraoperatively guide CCI modification for an unknown defect size/shape. First, the surgeon designed an oversized CCI based on his/her surgical plan. Intraoperatively, the surgeon resected the bone and digitized the resection using a navigation pointer. Next, a projector displayed the limits of the craniofacial bone defect onto the prefabricated, oversized CCI for the size modification process; the surgeon followed the projected trace to modify the implant. A cadaveric study compared the standard technique (n = 1) to the experimental technique (n = 5) using surgical time and implant fit. The technology reduced the time and effort needed to resize the oversized CCI by an order of magnitude as compared with the standard manual resizing process. Implant fit was consistently better for the computer-assisted case compared with the control by at least 30%, requiring only 5.17 minutes in the computer-assisted cases compared with 35 minutes for the control. This approach demonstrated improvement in surgical time and accuracy of CCI-based craniomaxillofacial reconstruction compared with previously reported methods. The craniomaxillofacial surgical assistance workstation will provide craniofacial surgeons a computer-assisted technology for effective and efficient single-stage reconstruction when exact craniofacial bone defect sizes are unknown.

Computational Hemodynamics Involving Artificial Devices

NASA Technical Reports Server (NTRS)

Kwak, Dochan; Kiris, Cetin; Feiereisen, William (Technical Monitor)

2001-01-01

This paper reports the progress being made towards developing complete blood flow simulation capability in human, especially, in the presence of artificial devices such as valves and ventricular assist devices. Devices modeling poses unique challenges different from computing the blood flow in natural hearts and arteries. There are many elements needed such as flow solvers, geometry modeling including flexible walls, moving boundary procedures and physiological characterization of blood. As a first step, computational technology developed for aerospace applications was extended in the recent past to the analysis and development of mechanical devices. The blood flow in these devices is practically incompressible and Newtonian, and thus various incompressible Navier-Stokes solution procedures can be selected depending on the choice of formulations, variables and numerical schemes. Two primitive variable formulations used are discussed as well as the overset grid approach to handle complex moving geometry. This procedure has been applied to several artificial devices. Among these, recent progress made in developing DeBakey axial flow blood pump will be presented from computational point of view. Computational and clinical issues will be discussed in detail as well as additional work needed.

Virtual Cloud Computing: Effects and Application of Hastily Formed Networks (HFN) for Humanitarian Assistance/Disaster Relief (HA/DR) Missions

DTIC Science & Technology

2011-09-01

COMPUTING: EFFECTS AND APPLICATION OF HASTILY FORMED NETWORKS (HFN) FOR HUMANITARIAN ASSISTANCE/DISASTER RELIEF (HA/DR) MISSIONS by Mark K. Morris...i REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour...SUBTITLE Virtual Cloud Computing: Effects and Application of Hastily Formed Networks (HFN) for Humanitarian Assistance/Disaster Relief (HA/DR) Missions

Computer-Aided Characterization and Diagnosis of Diffuse Liver Diseases Based on Ultrasound Imaging: A Review.

PubMed

Bharti, Puja; Mittal, Deepti; Ananthasivan, Rupa

2016-04-19

Diffuse liver diseases, such as hepatitis, fatty liver, and cirrhosis, are becoming a leading cause of fatality and disability all over the world. Early detection and diagnosis of these diseases is extremely important to save lives and improve effectiveness of treatment. Ultrasound imaging, a noninvasive diagnostic technique, is the most commonly used modality for examining liver abnormalities. However, the accuracy of ultrasound-based diagnosis depends highly on expertise of radiologists. Computer-aided diagnosis systems based on ultrasound imaging assist in fast diagnosis, provide a reliable "second opinion" for experts, and act as an effective tool to measure response of treatment on patients undergoing clinical trials. In this review, we first describe appearance of liver abnormalities in ultrasound images and state the practical issues encountered in characterization of diffuse liver diseases that can be addressed by software algorithms. We then discuss computer-aided diagnosis in general with features and classifiers relevant to diffuse liver diseases. In later sections of this paper, we review the published studies and describe the key findings of those studies. A concise tabular summary comparing image database, features extraction, feature selection, and classification algorithms presented in the published studies is also exhibited. Finally, we conclude with a summary of key findings and directions for further improvements in the areas of accuracy and objectiveness of computer-aided diagnosis. © The Author(s) 2016.

Computer-assisted cartography: an overview.

USGS Publications Warehouse

Guptill, S.C.; Starr, L.E.

1984-01-01

An assessment of the current status of computer-assisted cartography, in part, is biased by one's view of the cartographic process as a whole. From a traditional viewpoint we are concerned about automating the mapping process; from a progressive viewpoint we are concerned about using the tools of computer science to convey spatial information. On the surface these viewpoints appear to be in opposition. However, it is postulated that in the final analysis, they face the same goal. This overview uses the perspectives from two viewpoints to depict the current state of computer-assisted cartography and speculate on future goals, trends, and challenges.-Authors

Using the Computer to Improve Basic Skills.

ERIC Educational Resources Information Center

Bozeman, William; Hierstein, William J.

These presentations offer information on the benefits of using computer-assisted instruction (CAI) for remedial education. First, William J. Hierstein offers a summary of the Computer Assisted Basic Skills Project conducted by Southeastern Community College at the Iowa State Penitentiary. Hierstein provides background on the funding for the…

Effects of Using Simultaneous Prompting and Computer-Assisted Instruction during Small Group Instruction

ERIC Educational Resources Information Center

Ozen, Arzu; Ergenekon, Yasemin; Ulke-Kurkcuoglu, Burcu

2017-01-01

The current study investigated the relation between simultaneous prompting (SP), computer-assisted instruction (CAI), and the receptive identification of target pictures (presented on laptop computer) for four preschool students with developmental disabilities. The students' acquisition of nontarget information through observational learning also…

Conversational Simulation in Computer-Assisted Language Learning: Potential and Reality.

ERIC Educational Resources Information Center

Coleman, D. Wells

1988-01-01

Addresses the potential of conversational simulations for computer-assisted language learning (CALL) and reasons why this potential is largely untapped. Topics discussed include artificial intelligence; microworlds; parsing; realism versus reality in computer software; intelligent tutoring systems; and criteria to clarify what kinds of CALL…

Teaching Sight Words to Elementary Students With Intellectual Disability and Autism: A Comparison of Teacher-Directed Versus Computer-Assisted Simultaneous Prompting.

PubMed

Coleman, Mari Beth; Cherry, Rebecca A; Moore, Tara C; Park, Yujeong; Cihak, David F

2015-06-01

The purpose of this study was to compare the effects of teacher-directed simultaneous prompting to computer-assisted simultaneous prompting for teaching sight words to 3 elementary school students with intellectual disability. Activities in the computer-assisted condition were designed with Intellitools Classroom Suite software whereas traditional materials (i.e., flashcards) were used in the teacher-directed condition. Treatment conditions were compared using an adapted alternating treatments design. Acquisition of sight words occurred in both conditions for all 3 participants; however, each participant either clearly responded better in the teacher-directed condition or reported a preference for the teacher-directed condition when performance was similar with computer-assisted instruction being more efficient. Practical implications and directions for future research are discussed.

Incorporation of CAD/CAM Restoration Into Navy Dentistry

DTIC Science & Technology

2017-09-26

CAD/CAM Computer-aided design /Computer-assisted manufacturing CDT Common Dental Terminology DENCAS Dental Common Access System DTF Dental...to reduce avoidable dental emergencies for deployed sailors and marines. Dental Computer-aided design /Computer-assisted manufacturing (CAD/CAM...report will review and evaluate the placement rate by Navy dentists of digitally fabricated in-office ceramic restorations compared to traditional direct

The Effects of Gender on the Attitudes towards the Computer Assisted Instruction: A Meta-Analysis

ERIC Educational Resources Information Center

Cam, Sefika Sumeyye; Yarar, Gokhan; Toraman, Cetin; Erdamar, Gurcu Koc

2016-01-01

The idea that gender factor creates a difference on computer usage and computer-assisted instruction is based upon previous years. At that time, it was thought that some areas like engineering, science and mathematics were for males so it created a difference on the computer usage. Nevertheless, developing technology and females becoming more…

Audio computer-assisted self interview compared to traditional interview in an HIV-related behavioral survey in Vietnam.

PubMed

Le, Linh Cu; Vu, Lan T H

2012-10-01

Globally, population surveys on HIV/AIDS and other sensitive topics have been using audio computer-assisted self interview for many years. This interview technique, however, is still new to Vietnam and little is known about its application and impact in general population surveys. One plausible hypothesis is that residents of Vietnam interviewed using this technique may provide a higher response rate and be more willing to reveal their true behaviors than if interviewed with traditional methods. This study aims to compare audio computer-assisted self interview with traditional face-to-face personal interview and self-administered interview with regard to rates of refusal and affirmative responses to questions on sensitive topics related to HIV/AIDS. In June 2010, a randomized study was conducted in three cities (Ha Noi, Da Nan and Can Tho), using a sample of 4049 residents aged 15 to 49 years. Respondents were randomly assigned to one of three interviewing methods: audio computer-assisted self interview, personal face-to-face interview, and self-administered paper interview. Instead of providing answers directly to interviewer questions as with traditional methods, audio computer-assisted self-interview respondents read the questions displayed on a laptop screen, while listening to the questions through audio headphones, then entered responses using a laptop keyboard. A MySQL database was used for data management and SPSS statistical package version 18 used for data analysis with bivariate and multivariate statistical techniques. Rates of high risk behaviors and mean values of continuous variables were compared for the three data collection methods. Audio computer-assisted self interview showed advantages over comparison techniques, achieving lower refusal rates and reporting higher prevalence of some sensitive and risk behaviors (perhaps indication of more truthful answers). Premarital sex was reported by 20.4% in the audio computer-assisted self-interview survey group, versus 11.4% in the face-to-face group and 11.1% in the self-administered paper questionnaire group. The pattern was consistent for both male and female respondents and in both urban and rural settings. Men in the audio computer-assisted self-interview group also reported higher levels of high-risk sexual behavior--such as sex with sex workers and a higher average number of sexual partners--than did women in the same group. Importantly, item refusal rates on sensitive topics tended to be lower with audio computer-assisted self interview than with the other two methods. Combined with existing data from other countries and previous studies in Vietnam, these findings suggest that researchers should consider using audio computer-assisted self interview for future studies of sensitive and stigmatized topics, especially for men.

Infrared Cephalic-Vein to Assist Blood Extraction Tasks: Automatic Projection and Recognition

NASA Astrophysics Data System (ADS)

Lagüela, S.; Gesto, M.; Riveiro, B.; González-Aguilera, D.

2017-05-01

Thermal infrared band is not commonly used in photogrammetric and computer vision algorithms, mainly due to the low spatial resolution of this type of imagery. However, this band captures sub-superficial information, increasing the capabilities of visible bands regarding applications. This fact is especially important in biomedicine and biometrics, allowing the geometric characterization of interior organs and pathologies with photogrammetric principles, as well as the automatic identification and labelling using computer vision algorithms. This paper presents advances of close-range photogrammetry and computer vision applied to thermal infrared imagery, with the final application of Augmented Reality in order to widen its application in the biomedical field. In this case, the thermal infrared image of the arm is acquired and simultaneously projected on the arm, together with the identification label of the cephalic-vein. This way, blood analysts are assisted in finding the vein for blood extraction, especially in those cases where the identification by the human eye is a complex task. Vein recognition is performed based on the Gaussian temperature distribution in the area of the vein, while the calibration between projector and thermographic camera is developed through feature extraction and pattern recognition. The method is validated through its application to a set of volunteers, with different ages and genres, in such way that different conditions of body temperature and vein depth are covered for the applicability and reproducibility of the method.

Student Performance in Computer-Assisted Instruction in Programming.

ERIC Educational Resources Information Center

Friend, Jamesine E.; And Others

A computer-assisted instructional system to teach college students the computer language, AID (Algebraic Interpretive Dialogue), two control programs, and data collected by the two control programs are described. It was found that although first response errors were often those of AID syntax, such errors were easily corrected. Secondly, while…

Audio-Enhanced Computer Assisted Learning and Computer Controlled Audio-Instruction.

ERIC Educational Resources Information Center

Miller, K.; And Others

1983-01-01

Describes aspects of use of a microcomputer linked with a cassette recorder as a peripheral to enhance computer-assisted learning (CAL) and a microcomputer-controlled tape recorder linked with a microfiche reader in a commercially available teaching system. References and a listing of control programs are appended. (EJS)

Integrating Computer-Assisted Language Learning in Saudi Schools: A Change Model

ERIC Educational Resources Information Center

Alresheed, Saleh; Leask, Marilyn; Raiker, Andrea

2015-01-01

Computer-assisted language learning (CALL) technology and pedagogy have gained recognition globally for their success in supporting second language acquisition (SLA). In Saudi Arabia, the government aims to provide most educational institutions with computers and networking for integrating CALL into classrooms. However, the recognition of CALL's…

Some Measurement and Instruction Related Considerations Regarding Computer Assisted Testing.

ERIC Educational Resources Information Center

Oosterhof, Albert C.; Salisbury, David F.

The Assessment Resource Center (ARC) at Florida State University provides computer assisted testing (CAT) for approximately 4,000 students each term. Computer capabilities permit a small proctoring staff to administer tests simultaneously to large numbers of students. Programs provide immediate feedback for students and generate a variety of…

Computer-Assisted Instruction: Authoring Languages. ERIC Digest.

ERIC Educational Resources Information Center

Reeves, Thomas C.

One of the most perplexing tasks in producing computer-assisted instruction (CAI) is the authoring process. Authoring is generally defined as the process of turning the flowcharts, control algorithms, format sheets, and other documentation of a CAI program's design into computer code that will operationalize the simulation on the delivery system.…

Application of Adaptive Decision Aiding Systems to Computer-Assisted Instruction. Final Report, January-December 1974.

ERIC Educational Resources Information Center

May, Donald M.; And Others

The minicomputer-based Computerized Diagnostic and Decision Training (CDDT) system described combines the principles of artificial intelligence, decision theory, and adaptive computer assisted instruction for training in electronic troubleshooting. The system incorporates an adaptive computer program which learns the student's diagnostic and…

Mathematical Modeling and Computational Thinking

ERIC Educational Resources Information Center

Sanford, John F.; Naidu, Jaideep T.

2017-01-01

The paper argues that mathematical modeling is the essence of computational thinking. Learning a computer language is a valuable assistance in learning logical thinking but of less assistance when learning problem-solving skills. The paper is third in a series and presents some examples of mathematical modeling using spreadsheets at an advanced…

Computer Assisted Problem Solving in an Introductory Statistics Course. Technical Report No. 56.

ERIC Educational Resources Information Center

Anderson, Thomas H.; And Others

The computer assisted problem solving system (CAPS) described in this booklet administered "homework" problem sets designed to develop students' computational, estimation, and procedural skills. These skills were related to important concepts in an introductory statistics course. CAPS generated unique data, judged student performance,…

Computer-Assisted Instruction. Special Double Issue.

ERIC Educational Resources Information Center

Holmes, Glyn, Ed.

1984-01-01

This booklet presents evidence to support the idea that distinctions between the instructional and research applications of the computer are becoming blurred. The issue includes contributions from authors who are at the forefront of computer-assisted instruction (CAI) development in their respective fields. An attempt is made to represent most…

The Computer-Assisted Hypnosis Scale: Standardization and Norming of a Computer-Administered Measure of Hypnotic Ability.

ERIC Educational Resources Information Center

Grant, Carolyn D.; Nash, Michael R.

1995-01-01

In a counterbalanced, within subjects, repeated measures design, 130 undergraduates were administered the Computer-Assisted Hypnosis Scale (CAHS) and the Stanford Hypnotic Susceptibility Scale and were hypnotized. The CAHS was shown to be a psychometrically sound instrument for measuring hypnotic ability. (SLD)

Development of a laser-guided embedded-computer-controlled air-assisted precision sprayer

USDA-ARS?s Scientific Manuscript database

An embedded computer-controlled, laser-guided, air-assisted, variable-rate precision sprayer was developed to automatically adjust spray outputs on both sides of the sprayer to match presence, size, shape, and foliage density of tree crops. The sprayer was the integration of an embedded computer, a ...

Mobile Computer-Assisted-Instruction in Rural New Mexico.

ERIC Educational Resources Information Center

Gittinger, Jack D., Jr.

The University of New Mexico's three-year Computer Assisted Instruction Project established one mobile and five permanent laboratories offering remedial and vocational instruction in winter, 1984-85. Each laboratory has a Degem learning system with minicomputer, teacher terminal, and 32 student terminals. A Digital PDP-11 host computer runs the…

ICCE/ICCAI 2000 Full & Short Papers (Web-Based Learning).

ERIC Educational Resources Information Center

2000

This document contains full and short papers on World Wide Web-based learning from ICCE/ICCAI 2000 (International Conference on Computers in Education/International Conference on Computer-Assisted Instruction). Topics covered include: design and development of CAL (Computer Assisted Learning) systems; design and development of WBI (Web-Based…

"Intelligent" Computer Assisted Instruction (CAI) Applications. Interim Report.

ERIC Educational Resources Information Center

Brown, John Seely; And Others

Interim work is documented describing efforts to modify computer techniques used to recognize and process English language requests to an instructional simulator. The conversion from a hand-coded to a table driven technique are described in detail. Other modifications to a simulation based computer assisted instruction program to allow a gaming…

An Infrastructure for Web-Based Computer Assisted Learning

ERIC Educational Resources Information Center

Joy, Mike; Muzykantskii, Boris; Rawles, Simon; Evans, Michael

2002-01-01

We describe an initiative under way at Warwick to provide a technical foundation for computer aided learning and computer-assisted assessment tools, which allows a rich dialogue sensitive to individual students' response patterns. The system distinguishes between dialogues for individual problems and the linking of problems. This enables a subject…

CAPSAS: Computer Assisted Program for the Selection of Appropriate Statistics.

ERIC Educational Resources Information Center

Shermis, Mark D.; Albert, Susan L.

A computer-assisted program has been developed for the selection of statistics or statistical techniques by both students and researchers. Based on Andrews, Klem, Davidson, O'Malley and Rodgers "A Guide for Selecting Statistical Techniques for Analyzing Social Science Data," this FORTRAN-compiled interactive computer program was…

Evaluating the Effectiveness of an Interactive Multimedia Computer-based Patient Education Program in Cardiac Rehabilitation.

ERIC Educational Resources Information Center

Jenny, Ng Yuen Yee; Fai, Tam Sing

2001-01-01

A study compared 48 cardiac patients who used an interactive multimedia computer-assisted patient education program and 48 taught by tutorial. The computer-assisted instructional method resulted in significantly better knowledge about exercise and self-management of chronic diseases. (Contains 29 references.) (JOW)

Computers in Post-Secondary Developmental Education and Learning Assistance.

ERIC Educational Resources Information Center

Christ, Frank L.; McLaughlin, Richard C.

This update on computer technology--as it affects learning assistance directors and developmental education personnel--begins by reporting on new developments and changes that have taken place during the past two years in five areas: (1) hardware (microcomputer systems, low cost PC clones, combination Apple/PC machines, lab computer controllers…

Computer-Assisted Instruction: One Aid for Teachers of Reading.

ERIC Educational Resources Information Center

Rauch, Margaret; Samojeden, Elizabeth

Computer assisted instruction (CAI), an instructional system with direct interaction between the student and the computer, can be a valuable aid for presenting new concepts, for reinforcing of selective skills, and for individualizing instruction. The advantages CAI provides include self-paced learning, more efficient allocation of classroom time,…

Students' Attitudes towards Control Methods in Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Hintze, Hanne; And Others

1988-01-01

Describes study designed to investigate dental students' attitudes toward computer-assisted teaching as applied in programs for oral radiology in Denmark. Programs using personal computers and slide projectors with varying degrees of learner and teacher control are described, and differences in attitudes between male and female students are…

Using Computer-Assisted Instruction to Enhance Achievement of English Language Learners

ERIC Educational Resources Information Center

Keengwe, Jared; Hussein, Farhan

2014-01-01

Computer-assisted instruction (CAI) in English-Language environments offer practice time, motivates students, enhance student learning, increase authentic materials that students can study, and has the potential to encourage teamwork between students. The findings from this particular study suggested that students who used computer assisted…

Sense of agency in continuous action: Assistance-induced performance improvement is self-attributed even with knowledge of assistance.

PubMed

Inoue, Kazuya; Takeda, Yuji; Kimura, Motohiro

2017-02-01

In a task involving continuous action to achieve a goal, the sense of agency increases with an improvement in task performance that is induced by unnoticed computer assistance. This study investigated how explicit instruction about the existence of computer assistance affects the increase of sense of agency that accompanies performance improvement. Participants performed a continuous action task in which they controlled the direction of motion of a dot to a goal by pressing keys. When instructions indicated the absence of assistance, the sense of agency increased with performance improvement induced by computer assistance, replicating previous findings. Interestingly, this increase of sense of agency was also observed even when instructions indicated the presence of assistance. These results suggest that even when a plausible cause of performance improvement other than one's own action exists, the improvement can be misattributed to one's own control of action, resulting in an increased sense of agency. Copyright © 2016 Elsevier Inc. All rights reserved.

Applications of Computer-Assisted Navigation for the Minimally Invasive Reduction of Isolated Zygomatic Arch Fractures.

PubMed

Li, Zhi; Yang, Rong-Tao; Li, Zu-Bing

2015-09-01

Computer-assisted navigation has been widely used in oral and maxillofacial surgery. The purpose of this study was to describe the applications of computer-assisted navigation for the minimally invasive reduction of isolated zygomatic arch fractures. All patients identified as having isolated zygomatic arch fractures presenting to the authors' department from April 2013 through November 2014 were included in this prospective study. Minimally invasive reductions of isolated zygomatic arch fractures were performed on these patients under the guidance of computer-assisted navigation. The reduction status was evaluated by postoperative computed tomography (CT) 1 week after the operation. Postoperative complications and facial contours were evaluated during follow-up. Functional recovery was evaluated by the difference between the preoperative maximum interincisal mouth opening and that at the final follow-up. Twenty-three patients were included in this case series. The operation proceeded well in all patients. Postoperatively, all patients displayed uneventful healing without postoperative complication. Postoperative CT showed exact reduction in all cases. Satisfactory facial contour and functional recovery were observed in all patients. The preoperative maximal mouth opening ranged from 8 to 25 mm, and the maximal mouth opening at the final follow-up ranged from 36 to 42 mm. Computer-assisted navigation can be used not only for guiding zygomatic arch fracture reduction, but also for assessing reduction. Computer-assisted navigation is an effective and minimally invasive technique that can be applied in the reduction of isolated zygomatic arch fractures. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Computer-Assisted Instruction in Practical Nursing Education

ERIC Educational Resources Information Center

Kelley, Maureen

1976-01-01

Existing computer-assisted instructional programs for nursing students are studied and their application to the education of practical nurses is considered in the light of the recent history of nursing education. (Author)

A Peer-Assisted Learning Experience in Computer Programming Language Learning and Developing Computer Programming Skills

ERIC Educational Resources Information Center

Altintas, Tugba; Gunes, Ali; Sayan, Hamiyet

2016-01-01

Peer learning or, as commonly expressed, peer-assisted learning (PAL) involves school students who actively assist others to learn and in turn benefit from an effective learning environment. This research was designed to support students in becoming more autonomous in their learning, help them enhance their confidence level in tackling computer…

Computer Assisted Project-Based Instruction: The Effects on Science Achievement, Computer Achievement and Portfolio Assessment

ERIC Educational Resources Information Center

Erdogan, Yavuz; Dede, Dinçer

2015-01-01

The purpose of this study is to compare the effects of computer assisted project-based instruction on learners' achievement in a science and technology course, in a computer course and in portfolio development. With this aim in mind, a quasi-experimental design was used and a sample of 70 seventh grade secondary school students from Org. Esref…

Computer assisted holographic moire contouring

NASA Astrophysics Data System (ADS)

Sciammarella, Cesar A.

2000-01-01

Theoretical analyses and experimental results on holographic moire contouring on diffusely reflecting objects are presented. The sensitivity and limitations of the method are discussed. Particular emphasis is put on computer-assisted data retrieval, processing, and recording.

Delivering Continuing Education to the Pharmacist: Correspondence Course versus Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Knoll, K. Richard; And Others

1988-01-01

A study of the effectiveness of two teaching methods, correspondence study and computer-assisted instruction, for professional continuing education in pharmacokinetics found that both were effective methods. (AUTHOR/MSE)

Computer-Assisted Instruction and Increased Educational Productivity

ERIC Educational Resources Information Center

Cropley, A. J.; Gross, P. F.

1973-01-01

Describes the role of computer-assisted instruction (CAI) in increasing educational productivity and equality of opportunity. Examines a number of key questions concerning the interrelationship of CAI with the traditional education structure. (Authors/WM)

Using computer assisted learning for clinical skills education in nursing: integrative review.

PubMed

Bloomfield, Jacqueline G; While, Alison E; Roberts, Julia D

2008-08-01

This paper is a report of an integrative review of research investigating computer assisted learning for clinical skills education in nursing, the ways in which it has been studied and the general findings. Clinical skills are an essential aspect of nursing practice and there is international debate about the most effective ways in which these can be taught. Computer assisted learning has been used as an alternative to conventional teaching methods, and robust research to evaluate its effectiveness is essential. The CINAHL, Medline, BNI, PsycInfo and ERIC electronic databases were searched for the period 1997-2006 for research-based papers published in English. Electronic citation tracking and hand searching of reference lists and relevant journals was also undertaken. Twelve studies met the inclusion criteria. An integrative review was conducted and each paper was explored in relation to: design, aims, sample, outcome measures and findings. Many of the study samples were small and there were weaknesses in designs. There is limited empirical evidence addressing the use of computer assisted learning for clinical skills education in nursing. Computer assisted learning has been used to teach a limited range of clinical skills in a variety of settings. The paucity of evaluative studies indicates the need for more rigorous research to investigate the effect of computer assisted learning for this purpose. Areas that need to be addressed in future studies include: sample size, range of skills, longitudinal follow-up and control of confounding variables.

Manual vs. computer-assisted sperm analysis: can CASA replace manual assessment of human semen in clinical practice?

PubMed

Talarczyk-Desole, Joanna; Berger, Anna; Taszarek-Hauke, Grażyna; Hauke, Jan; Pawelczyk, Leszek; Jedrzejczak, Piotr

2017-01-01

The aim of the study was to check the quality of computer-assisted sperm analysis (CASA) system in comparison to the reference manual method as well as standardization of the computer-assisted semen assessment. The study was conducted between January and June 2015 at the Andrology Laboratory of the Division of Infertility and Reproductive Endocrinology, Poznań University of Medical Sciences, Poland. The study group consisted of 230 men who gave sperm samples for the first time in our center as part of an infertility investigation. The samples underwent manual and computer-assisted assessment of concentration, motility and morphology. A total of 184 samples were examined twice: manually, according to the 2010 WHO recommendations, and with CASA, using the program set-tings provided by the manufacturer. Additionally, 46 samples underwent two manual analyses and two computer-assisted analyses. The p-value of p < 0.05 was considered as statistically significant. Statistically significant differences were found between all of the investigated sperm parameters, except for non-progressive motility, measured with CASA and manually. In the group of patients where all analyses with each method were performed twice on the same sample we found no significant differences between both assessments of the same probe, neither in the samples analyzed manually nor with CASA, although standard deviation was higher in the CASA group. Our results suggest that computer-assisted sperm analysis requires further improvement for a wider application in clinical practice.

Current state of computer navigation and robotics in unicompartmental and total knee arthroplasty: a systematic review with meta-analysis.

PubMed

van der List, Jelle P; Chawla, Harshvardhan; Joskowicz, Leo; Pearle, Andrew D

2016-11-01

Recently, there is a growing interest in surgical variables that are intraoperatively controlled by orthopaedic surgeons, including lower leg alignment, component positioning and soft tissues balancing. Since more tight control over these factors is associated with improved outcomes of unicompartmental knee arthroplasty and total knee arthroplasty (TKA), several computer navigation and robotic-assisted systems have been developed. Although mechanical axis accuracy and component positioning have been shown to improve with computer navigation, no superiority in functional outcomes has yet been shown. This could be explained by the fact that many differences exist between the number and type of surgical variables these systems control. Most systems control lower leg alignment and component positioning, while some in addition control soft tissue balancing. Finally, robotic-assisted systems have the additional advantage of improving surgical precision. A systematic search in PubMed, Embase and Cochrane Library resulted in 40 comparative studies and three registries on computer navigation reporting outcomes of 474,197 patients, and 21 basic science and clinical studies on robotic-assisted knee arthroplasty. Twenty-eight of these comparative computer navigation studies reported Knee Society Total scores in 3504 patients. Stratifying by type of surgical variables, no significant differences were noted in outcomes between surgery with computer-navigated TKA controlling for alignment and component positioning versus conventional TKA (p = 0.63). However, significantly better outcomes were noted following computer-navigated TKA that also controlled for soft tissue balancing versus conventional TKA (mean difference 4.84, 95 % Confidence Interval 1.61, 8.07, p = 0.003). A literature review of robotic systems showed that these systems can, similarly to computer navigation, reliably improve lower leg alignment, component positioning and soft tissues balancing. Furthermore, two studies comparing robotic-assisted with computer-navigated surgery reported superiority of robotic-assisted surgery in controlling these factors. Manually controlling all these surgical variables can be difficult for the orthopaedic surgeon. Findings in this study suggest that computer navigation or robotic assistance may help managing these multiple variables and could improve outcomes. Future studies assessing the role of soft tissue balancing in knee arthroplasty and long-term follow-up studies assessing the role of computer-navigated and robotic-assisted knee arthroplasty are needed.

An Information and Technical Manual for the Computer-Assisted Teacher Training System (CATTS).

ERIC Educational Resources Information Center

Semmel, Melvyn I.; And Others

The manual presents technical information on the computer assisted teacher training system (CATTS) which aims at developing a versatile and economical computer based teacher training system with the capability of providing immediate analysis and feedback of data relevant to teacher pupil transactions in a classroom setting. The physical…

The Impact of Microtechnology. A Case for Reassessing the Role of Computers in Learning.

ERIC Educational Resources Information Center

Alty, J. L.

1982-01-01

Reviews recent advances in microtechnology and describes the impact they will have on computer aided instruction and learning. It is suggested that distributed systems based on network technology will become widespread, and computer assisted guidance systems will be developed to assist new unskilled users. Eight references are given. (CHC)

Review of Research on the Cognitive Effects of Computer-Assisted Learning.

ERIC Educational Resources Information Center

Mandinach, E.; And Others

This review of the research on the cognitive effects of computer-assisted instruction begins with an overview of the ACCCEL (Assessing Cognitive Consequences of Computer Environments for Learning) research program at the University of California at Berkeley, which consists of several interrelated studies examining the acquisition of such higher…

Religious Studies as a Test-Case For Computer-Assisted Instruction In The Humanities.

ERIC Educational Resources Information Center

Jones, Bruce William

Experiences with computer-assisted instructional (CAI) programs written for religious studies indicate that CAI has contributions to offer the humanities and social sciences. The usefulness of the computer for presentation, drill and review of factual material and its applicability to quantifiable data is well accepted. There now exist…

Computer-Assisted Intervention for Children with Low Numeracy Skills

ERIC Educational Resources Information Center

Rasanen, Pekka; Salminen, Jonna; Wilson, Anna J.; Aunio, Pirjo; Dehaene, Stanislas

2009-01-01

We present results of a computer-assisted intervention (CAI) study on number skills in kindergarten children. Children with low numeracy skill (n = 30) were randomly allocated to two treatment groups. The first group played a computer game (The Number Race) which emphasized numerical comparison and was designed to train number sense, while the…

Undergraduate Paramedic Students' Attitudes to E-Learning: Findings from Five University Programs

ERIC Educational Resources Information Center

Williams, Brett; Boyle, Malcolm; Molloy, Andrew; Brightwell, Richard; Munro, Graham; Service, Melinda; Brown, Ted

2011-01-01

Computers and computer-assisted instruction are being used with increasing frequency in the area of undergraduate paramedic education. Paramedic students' attitudes towards the use of e-learning technology and computer-assisted instruction have received limited attention in the empirical literature to date. The objective of this study was to…

Views of Pre-Service Primary School Teachers Regarding Computer Assisted Environmental Education

ERIC Educational Resources Information Center

Turan, Ilhan

2014-01-01

The main aim of this study is to highlight the importance of computer assisted instruction in environmental education. Recently, the importance of environmental education in many countries has begun to increase in parallel with environmental problems. This has led to increased interest in environmental education. The fact that computers were the…

Computer-Assisted Language Learning: Diversity in Research and Practice

ERIC Educational Resources Information Center

Stockwell, Glenn, Ed.

2012-01-01

Computer-assisted language learning (CALL) is an approach to teaching and learning languages that uses computers and other technologies to present, reinforce, and assess material to be learned, or to create environments where teachers and learners can interact with one another and the outside world. This book provides a much-needed overview of the…

A Computer-Assisted Instruction in Teaching Abstract Statistics to Public Affairs Undergraduates

ERIC Educational Resources Information Center

Ozturk, Ali Osman

2012-01-01

This article attempts to demonstrate the applicability of a computer-assisted instruction supported with simulated data in teaching abstract statistical concepts to political science and public affairs students in an introductory research methods course. The software is called the Elaboration Model Computer Exercise (EMCE) in that it takes a great…

Using Computer Assisted Instruction in a Reading and Study Skills Course.

ERIC Educational Resources Information Center

Rauch, Margaret

Test wiseness programs and computer assisted study skills instruction (CASSI) were found to be valuable resources for college reading and study skills instructors and students at St. Cloud State University (Minnesota). Two booklets on test wiseness cues were reorganized and used as computer programs to allow the information to be presented outside…

Computer Assisted School Automation (CASA) in Japan.

ERIC Educational Resources Information Center

Sakamoto, Takashi; Nakanome, Naoaki

1991-01-01

This assessment of the status of computer assisted school automation (CASA) in Japan begins by describing the structure of the Japanese educational system and the roles of CASA in that system. Statistics on various aspects of computers in Japanese schools and the findings of several surveys are cited to report on the present state of educational…

An Evaluation of the Effectiveness of a Computer-Assisted Reading Intervention

ERIC Educational Resources Information Center

Messer, David; Nash, Gilly

2018-01-01

Background: A cost-effective method to address reading delays is to use computer-assisted learning, but these techniques are not always effective. Methods: We evaluated a commercially available computer system that uses visual mnemonics, in a randomised controlled trial with 78 English-speaking children (mean age 7 years) who their schools…

The Use of Computational Fluid Dynamics in the Development of Ventricular Assist Devices

PubMed Central

Fraser, Katharine H.; Taskin, M. Ertan; Griffith, Bartley P.; Wu, Zhongjun J.

2010-01-01

Progress in the field of prosthetic cardiovascular devices has significantly contributed to the rapid advancements in cardiac therapy during the last four decades. The concept of mechanical circulatory assistance was established with the first successful clinical use of heart-lung machines for cardiopulmonary bypass. Since then a variety of devices have been developed to replace or assist diseased components of the cardiovascular system. Ventricular assist devices (VADs) are basically mechanical pumps designed to augment or replace the function of one or more chambers of the failing heart. Computational Fluid Dynamics (CFD) is an attractive tool in the development process of VADs, allowing numerous different designs to be characterized for their functional performance virtually, for a wide range of operating conditions, without the physical device being fabricated. However, VADs operate in a flow regime which is traditionally difficult to simulate; the transitional region at the boundary of laminar and turbulent flow. Hence different methods have been used and the best approach is debatable. In addition to these fundamental fluid dynamic issues, blood consists of biological cells. Device-induced biological complications are a serious consequence of VAD use. The complications include blood damage (haemolysis, blood cell activation), thrombosis and emboli. Patients are required to take anticoagulation medication constantly which may cause bleeding. Despite many efforts blood damage models have still not been implemented satisfactorily into numerical analysis of VADs, which severely undermines the full potential of CFD. This paper reviews the current state of the art CFD for analysis of blood pumps, including a practical critical review of the studies to date, which should help device designers choose the most appropriate methods; a summary of blood damage models and the difficulties in implementing them into CFD; and current gaps in knowledge and areas for future work. PMID:21075669

(Computer) Vision without Sight

PubMed Central

Manduchi, Roberto; Coughlan, James

2012-01-01

Computer vision holds great promise for helping persons with blindness or visual impairments (VI) to interpret and explore the visual world. To this end, it is worthwhile to assess the situation critically by understanding the actual needs of the VI population and which of these needs might be addressed by computer vision. This article reviews the types of assistive technology application areas that have already been developed for VI, and the possible roles that computer vision can play in facilitating these applications. We discuss how appropriate user interfaces are designed to translate the output of computer vision algorithms into information that the user can quickly and safely act upon, and how system-level characteristics affect the overall usability of an assistive technology. Finally, we conclude by highlighting a few novel and intriguing areas of application of computer vision to assistive technology. PMID:22815563

Total knee arthroplasty with computer-assisted navigation more closely replicates normal knee biomechanics than conventional surgery.

PubMed

McClelland, Jodie A; Webster, Kate E; Ramteke, Alankar A; Feller, Julian A

2017-06-01

Computer-assisted navigation in total knee arthroplasty (TKA) reduces variability and may improve accuracy in the postoperative static alignment. The effect of navigation on alignment and biomechanics during more dynamic movements has not been investigated. This study compared knee biomechanics during level walking of 121 participants: 39 with conventional TKA, 42 with computer-assisted navigation TKA and 40 unimpaired control participants. Standing lower-limb alignment was significantly closer to ideal in participants with navigation TKA. During gait, when differences in walking speed were accounted for, participants with conventional TKA had less knee flexion during stance and swing than controls (P<0.01), but there were no differences between participants with navigation TKA and controls for the same variables. Both groups of participants with TKA had lower knee adduction moments than controls (P<0.01). In summary, there were fewer differences in the biomechanics of computer-assisted navigation TKA patients compared to controls than for patients with conventional TKA. Computer-assisted navigation TKA may restore biomechanics during walking that are closer to normal than conventional TKA. Copyright © 2017 Elsevier B.V. All rights reserved.

Computer-assisted cognitive remediation therapy: cognition, self-esteem and quality of life in schizophrenia.

PubMed

Garrido, Gemma; Barrios, Maite; Penadés, Rafael; Enríquez, Maria; Garolera, Maite; Aragay, Núria; Pajares, Marta; Vallès, Vicenç; Delgado, Luis; Alberni, Joan; Faixa, Carlota; Vendrell, Josep M

2013-11-01

Quality of life (QoL) is an important outcome in the treatment of schizophrenia. Cognitive deficits have an impact on functional outcomes. Cognitive remediation therapy is emerging as a psychological intervention that targets cognitive impairment, but the effect of computer-assisted cognitive remediation on neuropsychology and social functioning and wellbeing remains unclear. The aim of the current study is to investigate the neurocognitive outcomes of computer-assisted cognitive remediation (CACR) therapy in a sample of schizophrenia patients, and to measure the quality of life and self-esteem as secondary outcomes. Sixty-seven people with schizophrenia were randomly assigned to computer-assisted cognitive remediation or an active control condition. The main outcomes were neuropsychological measures and secondary outcomes (self-esteem and quality of life). Measurements were recorded at baseline and post-treatment. The CACR therapy group improved in speed of processing, working memory and reasoning and problem-solving cognitive domains. QoL and self-esteem measures also showed significant improvements over time in this group. Computer-assisted cognitive remediation therapy for people with schizophrenia achieved improvements in neuropsychological performance and in QoL and self-esteem measurements. © 2013 Elsevier B.V. All rights reserved.

Improved pulmonary nodule classification utilizing quantitative lung parenchyma features.

PubMed

Dilger, Samantha K N; Uthoff, Johanna; Judisch, Alexandra; Hammond, Emily; Mott, Sarah L; Smith, Brian J; Newell, John D; Hoffman, Eric A; Sieren, Jessica C

2015-10-01

Current computer-aided diagnosis (CAD) models for determining pulmonary nodule malignancy characterize nodule shape, density, and border in computed tomography (CT) data. Analyzing the lung parenchyma surrounding the nodule has been minimally explored. We hypothesize that improved nodule classification is achievable by including features quantified from the surrounding lung tissue. To explore this hypothesis, we have developed expanded quantitative CT feature extraction techniques, including volumetric Laws texture energy measures for the parenchyma and nodule, border descriptors using ray-casting and rubber-band straightening, histogram features characterizing densities, and global lung measurements. Using stepwise forward selection and leave-one-case-out cross-validation, a neural network was used for classification. When applied to 50 nodules (22 malignant and 28 benign) from high-resolution CT scans, 52 features (8 nodule, 39 parenchymal, and 5 global) were statistically significant. Nodule-only features yielded an area under the ROC curve of 0.918 (including nodule size) and 0.872 (excluding nodule size). Performance was improved through inclusion of parenchymal (0.938) and global features (0.932). These results show a trend toward increased performance when the parenchyma is included, coupled with the large number of significant parenchymal features that support our hypothesis: the pulmonary parenchyma is influenced differentially by malignant versus benign nodules, assisting CAD-based nodule characterizations.

Application of Computer-Assisted Learning Methods in the Teaching of Chemical Spectroscopy.

ERIC Educational Resources Information Center

Ayscough, P. B.; And Others

1979-01-01

Discusses the application of computer-assisted learning methods to the interpretation of infrared, nuclear magnetic resonance, and mass spectra; and outlines extensions into the area of integrated spectroscopy. (Author/CMV)

Review of Audio Interfacing Literature for Computer-Assisted Music Instruction.

ERIC Educational Resources Information Center

Watanabe, Nan

1980-01-01

Presents a review of the literature dealing with audio devices used in computer assisted music instruction and discusses the need for research and development of reliable, cost-effective, random access audio hardware. (Author)

On Wings: Aerodynamics of Eagles.

ERIC Educational Resources Information Center

Millson, David

2000-01-01

The Aerodynamics Wing Curriculum is a high school program that combines basic physics, aerodynamics, pre-engineering, 3D visualization, computer-assisted drafting, computer-assisted manufacturing, production, reengineering, and success in a 15-hour, 3-week classroom module. (JOW)

77 FR 30540 - Proposed Collection; Comment Request; Cognitive Testing of Instrumentation and Materials for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... methods of administration (e.g., computer assisted personal interviews [CAPI], audio computer assisted self-interviews [ACASI], web-based interviews). Cognitive testing of these materials and methods will...

A Comparative Study to Evaluate the Effectiveness of Computer Assisted Instruction (CAI) versus Class Room Lecture (RL) for Computer Science at ICS Level

ERIC Educational Resources Information Center

Kausar, Tayyaba; Choudhry, Bushra Naoreen; Gujjar, Aijaz Ahmed

2008-01-01

This study was aimed to evaluate the effectiveness of CAI vs. classroom lecture for computer science at ICS level. The objectives were to compare the learning effects of two groups with class room lecture and computer assisted instruction studying the same curriculum and the effects of CAI and CRL in terms of cognitive development. Hypothesis of…

A Comparative Study to Evaluate the Effectiveness of Computer Assisted Instruction (CAI) versus Class Room Lecture (CRL) for Computer Science at ICS Level

ERIC Educational Resources Information Center

Kausar, Tayyaba; Choudhry, Bushra Naoreen; Gujjar, Aijaz Ahmed

2008-01-01

This study was aimed to evaluate the effectiveness of CAI vs. classroom lecture for computer science at ICS level. The objectives were to compare the learning effects of two groups with class room lecture and computer assisted instruction studying the same curriculum and the effects of CAI and CRL in terms of cognitive development. Hypothesis of…

Flood damage assessment using computer-assisted analysis of color infrared photography

USGS Publications Warehouse

Anderson, William H.

1978-01-01

Use of digitized aerial photographs for flood damage assessment in agriculture is new and largely untested. However, under flooding circumstances similar to the 1975 Red River Valley flood, computer-assisted techniques can be extremely useful, especially if detailed crop damage estimates are needed within a relatively short period of time.Airphoto interpretation techniques, manual or computer-assisted, are not intended to replace conventional ground survey and sampling procedures. But their use should be considered a valuable addition to the tools currently available for assessing agricultural flood damage.

Computer-assisted stereotactic neurological surgery: pre-planning and on-site real-time operating control and simulation system

NASA Astrophysics Data System (ADS)

Zamorano, Lucia J.; Jiang, Charlie Z. W.

1993-09-01

In this decade the concept and development of computer assisted stereotactic neurological surgery has improved dramatically. First, the computer network replaced the tape as the data transportation media. Second, newer systems include multi-modality image correlation and frameless stereotactics as an integral part of their functionality, and offer extensive assistance to the neurosurgeon from the preplanning stages to and throughout the operation itself. These are very important changes, and have spurred the development of many interesting techniques. Successful systems include the ISG and NSPS-3.0.

SCREENOP: A Computer Assisted Model for ASW (Anti-Submarine Warfare) Screen Design.

DTIC Science & Technology

1983-09-01

AD-A736 892 SCREENOP: A COMPUTER ASSISTED MODEL FOR ASW I (ANTISUBMARINE WARFARE) SCREEN DESIGN (S) NAVAL , POSTGRADUATE SCHOOL MONTEREY CA W J...POSTGRADUATE SCHOOL £ Monterey, California DTIC $ELECTE f JAIN17 1984J THESIS SCREENOP: A COMPUTER ASSISTED MODEL FOR ASH SCREEN DESIGN by William Joseph... Design SL AVSIUACY rCin do msiwoS 0ddst aO memeo mE Idm.M& 6y 61-k imwel) This chesis is a description of the Naval Postgraduate School’s version of

Assisting People with Developmental Disabilities to Improve Computer Pointing Efficiency through Multiple Mice and Automatic Pointing Assistive Programs

ERIC Educational Resources Information Center

Shih, Ching-Hsiang

2011-01-01

This study combines multi-mice technology (people with disabilities can use standard mice, instead of specialized alternative computer input devices, to achieve complete mouse operation) with an assistive pointing function (i.e. cursor-capturing, which enables the user to move the cursor to the target center automatically), to assess whether two…

Computer Assisted Learning for Biomedical Engineering Education: Tools

DTIC Science & Technology

2001-10-25

COMPUTER ASSISTED LEARNING FOR BIOMEDICAL ENGINEERING EDUCATION : TOOLS Ayhan ÝSTANBULLU1 Ýnan GÜLER2 1 Department of Electronic...of Technical Education , Gazi University, 06500 Ankara, Türkiye Abstract- Interactive multimedia learning environment is being proposed...Assisted Learning (CAL) are given and some tools used in this area are explained. Together with the developments in the area of distance education

Modelling and characterization of photothermal effects assisted with gold nanorods in ex vivo samples and in a murine model

NASA Astrophysics Data System (ADS)

Lamela Rivera, Horacio; Rodríguez Jara, Félix; Cunningham, Vincent

2011-03-01

We discuss in this article the implementation of a laser-tissue interaction and bioheat-transfer 2-D finite-element model for Photothermal Therapy assisted with Gold Nanorods. We have selected Gold Nanorods as absorbing nanostructures in order to improve the efficiency of using compact diode lasers because of their high opto-thermal conversion efficiency at 808 and 850 nm. The goal is to model the distribution of the optical energy among the tissue including the skin absorption effects and the tissue thermal response, with and without the presence of Gold Nanorods. The heat generation due to the optical energy absorption and the thermal propagation will be computationally modeled and optimized. The model has been evaluated and compared with experimental ex-vivo data in fresh chicken muscle samples and in-vivo BALB/c mice animal model.

[Impact of digital technology on clinical practices: perspectives from surgery].

PubMed

Zhang, Y; Liu, X J

2016-04-09

Digital medical technologies or computer aided medical procedures, refer to imaging, 3D reconstruction, virtual design, 3D printing, navigation guided surgery and robotic assisted surgery techniques. These techniques are integrated into conventional surgical procedures to create new clinical protocols that are known as "digital surgical techniques". Conventional health care is characterized by subjective experiences, while digital medical technologies bring quantifiable information, transferable data, repeatable methods and predictable outcomes into clinical practices. Being integrated into clinical practice, digital techniques facilitate surgical care by improving outcomes and reducing risks. Digital techniques are becoming increasingly popular in trauma surgery, orthopedics, neurosurgery, plastic and reconstructive surgery, imaging and anatomic sciences. Robotic assisted surgery is also evolving and being applied in general surgery, cardiovascular surgery and orthopedic surgery. Rapid development of digital medical technologies is changing healthcare and clinical practices. It is therefore important for all clinicians to purposefully adapt to these technologies and improve their clinical outcomes.

Computer Vision Assisted Virtual Reality Calibration

NASA Technical Reports Server (NTRS)

Kim, W.

1999-01-01

A computer vision assisted semi-automatic virtual reality (VR) calibration technology has been developed that can accurately match a virtual environment of graphically simulated three-dimensional (3-D) models to the video images of the real task environment.

Implementation of Audio Computer-Assisted Interviewing Software in HIV/AIDS Research

PubMed Central

Pluhar, Erika; Yeager, Katherine A.; Corkran, Carol; McCarty, Frances; Holstad, Marcia McDonnell; Denzmore-Nwagbara, Pamela; Fielder, Bridget; DiIorio, Colleen

2007-01-01

Computer assisted interviewing (CAI) has begun to play a more prominent role in HIV/AIDS prevention research. Despite the increased popularity of CAI, particularly audio computer assisted self-interviewing (ACASI), some research teams are still reluctant to implement ACASI technology due to lack of familiarity with the practical issues related to using these software packages. The purpose of this paper is to describe the implementation of one particular ACASI software package, the Questionnaire Development System™ (QDS™), in several nursing and HIV/AIDS prevention research settings. We present acceptability and satisfaction data from two large-scale public health studies in which we have used QDS with diverse populations. We also address issues related to developing and programming a questionnaire, discuss practical strategies related to planning for and implementing ACASI in the field, including selecting equipment, training staff, and collecting and transferring data, and summarize advantages and disadvantages of computer assisted research methods. PMID:17662924

Developing Understanding of Image Formation by Lenses through Collaborative Learning Mediated by Multimedia Computer-Assisted Learning Programs

ERIC Educational Resources Information Center

Tao, Ping-Kee

2004-01-01

This article reports the use of a computer-based collaborative learning instruction designed to help students develop understanding of image formation by lenses. The study aims to investigate how students, working in dyads and mediated by multimedia computer-assisted learning (CAL) programs, construct shared knowledge and understanding. The…

Computer Assisted Instruction. Papers Presented at the Association for Educational Data Systems Annual Convention (Phoenix, Arizona, May 3-7, 1976).

ERIC Educational Resources Information Center

Association for Educational Data Systems, Washington, DC.

Two abstracts and seventeen articles on computer assisted instruction (CAI) presented at the 1976 Association for Educational Data Systems (AEDS) convention are included here. Four new computer programs are described: Author System for Education and Training (ASET); GNOSIS, a Swedish/English CAI package; Statistical Interactive Programming System…

Report on WRITE; A Computer Assisted Instruction Course in Written English Usage.

ERIC Educational Resources Information Center

Dunwell, Stephen; And Others

A computer-assisted instructional (CAI) course, WRITE, was used at the Poughkeepsie, New York, Middle School to help 5th through 8th graders with spelling and word usage problems. The course used the Coursewriter III language and an IBM System/360 computer; students received self-paced instructional programs at typewriter terminals. All teaching…

Computer-Assisted Performance Evaluation for Navy Anti-Air Warfare Training: Concepts, Methods, and Constraints.

ERIC Educational Resources Information Center

Chesler, David J.

An improved general methodological approach for the development of computer-assisted evaluation of trainee performance in the computer-based simulation environment is formulated in this report. The report focuses on the Tactical Advanced Combat Direction and Electronic Warfare system (TACDEW) at the Fleet Anti-Air Warfare Training Center at San…

The Advantages and Disadvantages of Five Common Computer Assisted Instruction Modes.

ERIC Educational Resources Information Center

Davidson, Robert L.; Traylor, Karen

1987-01-01

This article reviews five modes of computer-assisted software so that teachers will be more aware of them and use computers more in their classrooms. The five modes are the following: (1) drill and practice; (2) tutorial; (3) simulation; (4) demonstration; and (5) instructional games. Teachers should review softwares and choose those that meet…

Design and Construction of Computer-Assisted Instructional Material: A Handbook for Reading/Language Arts Teachers.

ERIC Educational Resources Information Center

Balajthy, Ernest

Intended for reading and language arts teachers at all educational levels, this guide presents information to be used by teachers in constructing their own computer assisted educational software using the BASIC programming language and Apple computers. Part 1 provides an overview of the components of traditional tutorial and drill-and-practice…

Development of a Computer-Assisted Instrumentation Curriculum for Physics Students: Using LabVIEW and Arduino Platform

ERIC Educational Resources Information Center

Kuan, Wen-Hsuan; Tseng, Chi-Hung; Chen, Sufen; Wong, Ching-Chang

2016-01-01

We propose an integrated curriculum to establish essential abilities of computer programming for the freshmen of a physics department. The implementation of the graphical-based interfaces from Scratch to LabVIEW then to LabVIEW for Arduino in the curriculum "Computer-Assisted Instrumentation in the Design of Physics Laboratories" brings…

Preventing Internal Computer Abuse

DTIC Science & Technology

1986-12-01

abusers of computer systems are individuals who are -’’internal" to and working for the victim organization (these include full-time employees , part...Moonlighting * Organizational Property * Nonuse/nondisclosure * Substance Abuse * Gambling Employee Assistance Program "Whistle Blower" Policy EDP Auditor 1...sensitive computer systems. Of all the controls discussed so far. the Employee Assistance Program ’ EAP

Computer-Assisted Mathematics Instruction for Students with Specific Learning Disability: A Review of the Literature

ERIC Educational Resources Information Center

Stultz, Sherry L.

2017-01-01

This review was conducted to evaluate the current body of scholarly research regarding the use of computer-assisted instruction (CAI) to teach mathematics to students with specific learning disability (SLD). For many years, computers are utilized for educational purposes. However, the effectiveness of CAI for teaching mathematics to this specific…

A Computer-Assisted Test Design and Diagnosis System for Use by Classroom Teachers

ERIC Educational Resources Information Center

He, Q.; Tymms, P.

2005-01-01

Computer-assisted assessment (CAA) has become increasingly important in education in recent years. A variety of computer software systems have been developed to help assess the performance of students at various levels. However, such systems are primarily designed to provide objective assessment of students and analysis of test items, and focus…

Investigating the Effects of Computer-Assisted Instruction on Achievement and Attitudes towards Mathematics among Seventh-Grade Students in Kuwait

ERIC Educational Resources Information Center

Soliman, Mamdouh M.; Hilal, Ahmed J.

2016-01-01

This study evaluates the effectiveness of Computer-Assisted Instruction (CAI) compared with traditional classroom instruction of mathematics of seventh graders in Kuwait's public schools. We aimed to compare students learning outcomes between two groups: the control group, taught traditionally without the use of computers, and the experimental…

Gene regulatory networks: a coarse-grained, equation-free approach to multiscale computation.

PubMed

Erban, Radek; Kevrekidis, Ioannis G; Adalsteinsson, David; Elston, Timothy C

2006-02-28

We present computer-assisted methods for analyzing stochastic models of gene regulatory networks. The main idea that underlies this equation-free analysis is the design and execution of appropriately initialized short bursts of stochastic simulations; the results of these are processed to estimate coarse-grained quantities of interest, such as mesoscopic transport coefficients. In particular, using a simple model of a genetic toggle switch, we illustrate the computation of an effective free energy Phi and of a state-dependent effective diffusion coefficient D that characterize an unavailable effective Fokker-Planck equation. Additionally we illustrate the linking of equation-free techniques with continuation methods for performing a form of stochastic "bifurcation analysis"; estimation of mean switching times in the case of a bistable switch is also implemented in this equation-free context. The accuracy of our methods is tested by direct comparison with long-time stochastic simulations. This type of equation-free analysis appears to be a promising approach to computing features of the long-time, coarse-grained behavior of certain classes of complex stochastic models of gene regulatory networks, circumventing the need for long Monte Carlo simulations.

Cost-Benefit Analysis for ECIA Chapter 1 and State DPPF Programs Comparing Groups Receiving Regular Program Instruction and Groups Receiving Computer Assisted Instruction/Computer Management System (CAI/CMS). 1986-87.

ERIC Educational Resources Information Center

Chamberlain, Ed

A cost benefit study was conducted to determine the effectiveness of a computer assisted instruction/computer management system (CAI/CMS) as an alternative to conventional methods of teaching reading within Chapter 1 and DPPF funded programs of the Columbus (Ohio) Public Schools. The Chapter 1 funded Compensatory Language Experiences and Reading…

Zap 'Em with Assistive Technology: Notetaking, Modified Materials, Assistive Writing Tools, References, Organizational Tools, Cognitive Assistance, Adapted Access.

ERIC Educational Resources Information Center

Lahm, Elizabeth A.; Morrissette, Sandra K.

This collection of materials describes different types of computer applications and software that can help students with disabilities. It contains information on: (1) Easy Access, a feature of the systems software on every Macintosh computer that allows use of the keypad instead of the mouse, options for slow keys, and options for sticky keys; (2)…

From Computer Assisted Language Learning (CALL) to Mobile Assisted Language Use (MALU)

ERIC Educational Resources Information Center

Jarvis, Huw; Achilleos, Marianna

2013-01-01

This article begins by critiquing the long-established acronym CALL (Computer Assisted Language Learning). We then go on to report on a small-scale study which examines how student non-native speakers of English use a range of digital devices beyond the classroom in both their first (L1) and second (L2) languages. We look also at the extent to…

CATTS (Computer Assisted Teacher Training System) Technology in Analyzing Observational Data from Public School Classrooms: A Study of Interactive Tactics and Decisions of Teachers.

ERIC Educational Resources Information Center

Lynch, William W.

Prompting of reading errors is a common pattern of teaching behavior occurring in reading groups. Teachers' tactics in responding to pupil errors during oral reading in public school classrooms were analyzed with the assistance of the technology of the Computer Assisted Teacher Training System (CATTS) to formulate hypotheses about teacher decision…

Computer-Assisted Periodical Routing and Renewal Audit

ERIC Educational Resources Information Center

Yerkey, A. Neil

1973-01-01

A computer-assisted periodical control system was designed to reduce clerical time required to maintain records in three areas: renewal audit, routing, and records-keeping. The renewal audit features are unusual and are described in detail. (3 references) (Author/DH)

Computer-Assisted Traffic Engineering Using Assignment, Optimal Signal Setting, and Modal Split

DOT National Transportation Integrated Search

1978-05-01

Methods of traffic assignment, traffic signal setting, and modal split analysis are combined in a set of computer-assisted traffic engineering programs. The system optimization and user optimization traffic assignments are described. Travel time func...

Funding for Computer-Assisted Instruction Projects.

ERIC Educational Resources Information Center

Corn, Milton

1994-01-01

An informal survey of individuals and a search of MEDLINE literature sought information on funding sources for computer-assisted instruction projects in dental, medical, and nursing education. General patterns are outlined, and suggestions are made for locating project funding. (MSE)

Expert Systems: Tutors, Tools, and Tutees.

ERIC Educational Resources Information Center

Lippert, Renate C.

1989-01-01

Discusses the current status, research, and practical implications of artificial intelligence and expert systems in education. Topics discussed include computer-assisted instruction; intelligent computer-assisted instruction; intelligent tutoring systems; instructional strategies involving the creation of knowledge bases; decision aids;…

Modelling switching-time effects in high-frequency power conditioning networks

NASA Technical Reports Server (NTRS)

Owen, H. A.; Sloane, T. H.; Rimer, B. H.; Wilson, T. G.

1979-01-01

Power transistor networks which switch large currents in highly inductive environments are beginning to find application in the hundred kilohertz switching frequency range. Recent developments in the fabrication of metal-oxide-semiconductor field-effect transistors in the power device category have enhanced the movement toward higher switching frequencies. Models for switching devices and of the circuits in which they are imbedded are required to properly characterize the mechanisms responsible for turning on and turning off effects. Easily interpreted results in the form of oscilloscope-like plots assist in understanding the effects of parametric studies using topology oriented computer-aided analysis methods.

GEODE An electrical energy supply with high availability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mertz, J.L.; Gerard, M.J.; Girard, J.

1983-10-01

Project GEODE describes an electrical energy supply characterized by its very high availability. It is to be used in the PTT (French Telephone Company) telephone exchanges and is targeted for an unavailability of better than 10/sup -6/. In order to achieve this performance Merlin Gerin has adopted: a double bus bar architecture, remote controlled electrical equipment, a motor-generator set specifically designed for this project, and computer assisted surveillance. The authors present the overall reliability calculations for this project along with that for energy sources. The E.d.F (French Utility Company) network and the Motor-Generators.

Experimental teleportation of a quantum controlled-NOT gate.

PubMed

Huang, Yun-Feng; Ren, Xi-Feng; Zhang, Yong-Sheng; Duan, Lu-Ming; Guo, Guang-Can

2004-12-10

Teleportation of quantum gates is a critical step for the implementation of quantum networking and teleportation-based models of quantum computation. We report an experimental demonstration of teleportation of the prototypical quantum controlled-NOT (CNOT) gate. Assisted with linear optical manipulations, photon entanglement produced from parametric down-conversion, and postselection from the coincidence measurements, we teleport the quantum CNOT gate from acting on local qubits to acting on remote qubits. The quality of the quantum gate teleportation is characterized through the method of quantum process tomography, with an average fidelity of 0.84 demonstrated for the teleported gate.

compuGUT: An in silico platform for simulating intestinal fermentation

NASA Astrophysics Data System (ADS)

Moorthy, Arun S.; Eberl, Hermann J.

The microbiota inhabiting the colon and its effect on health is a topic of significant interest. In this paper, we describe the compuGUT - a simulation tool developed to assist in exploring interactions between intestinal microbiota and their environment. The primary numerical machinery is implemented in C, and the accessory scripts for loading and visualization are prepared in bash (LINUX) and R. SUNDIALS libraries are employed for numerical integration, and googleVis API for interactive visualization. Supplementary material includes a concise description of the underlying mathematical model, and detailed characterization of numerical errors and computing times associated with implementation parameters.

An economic model to evaluate cost-effectiveness of computer assisted knee replacement surgery in Norway.

PubMed

Gøthesen, Øystein; Slover, James; Havelin, Leif; Askildsen, Jan Erik; Malchau, Henrik; Furnes, Ove

2013-07-06

The use of Computer Assisted Surgery (CAS) for knee replacements is intended to improve the alignment of knee prostheses in order to reduce the number of revision operations. Is the cost effectiveness of computer assisted surgery influenced by patient volume and age? By employing a Markov model, we analysed the cost effectiveness of computer assisted surgery versus conventional arthroplasty with respect to implant survival and operation volume in two theoretical Norwegian age cohorts. We obtained mortality and hospital cost data over a 20-year period from Norwegian registers. We presumed that the cost of an intervention would need to be below NOK 500,000 per QALY (Quality Adjusted Life Year) gained, to be considered cost effective. The added cost of computer assisted surgery, provided this has no impact on implant survival, is NOK 1037 and NOK 1414 respectively for 60 and 75-year-olds per quality-adjusted life year at a volume of 25 prostheses per year, and NOK 128 and NOK 175 respectively at a volume of 250 prostheses per year. Sensitivity analyses showed that the 10-year implant survival in cohort 1 needs to rise from 89.8% to 90.6% at 25 prostheses per year, and from 89.8 to 89.9% at 250 prostheses per year for computer assisted surgery to be considered cost effective. In cohort 2, the required improvement is a rise from 95.1% to 95.4% at 25 prostheses per year, and from 95.10% to 95.14% at 250 prostheses per year. The cost of using computer navigation for total knee replacements may be acceptable for 60-year-old as well as 75-year-old patients if the technique increases the implant survival rate just marginally, and the department has a high operation volume. A low volume department might not achieve cost-effectiveness unless computer navigation has a more significant impact on implant survival, thus may defer the investments until such data are available.

From computer-assisted intervention research to clinical impact: The need for a holistic approach.

PubMed

Ourselin, Sébastien; Emberton, Mark; Vercauteren, Tom

2016-10-01

The early days of the field of medical image computing (MIC) and computer-assisted intervention (CAI), when publishing a strong self-contained methodological algorithm was enough to produce impact, are over. As a community, we now have substantial responsibility to translate our scientific progresses into improved patient care. In the field of computer-assisted interventions, the emphasis is also shifting from the mere use of well-known established imaging modalities and position trackers to the design and combination of innovative sensing, elaborate computational models and fine-grained clinical workflow analysis to create devices with unprecedented capabilities. The barriers to translating such devices in the complex and understandably heavily regulated surgical and interventional environment can seem daunting. Whether we leave the translation task mostly to our industrial partners or welcome, as researchers, an important share of it is up to us. We argue that embracing the complexity of surgical and interventional sciences is mandatory to the evolution of the field. Being able to do so requires large-scale infrastructure and a critical mass of expertise that very few research centres have. In this paper, we emphasise the need for a holistic approach to computer-assisted interventions where clinical, scientific, engineering and regulatory expertise are combined as a means of moving towards clinical impact. To ensure that the breadth of infrastructure and expertise required for translational computer-assisted intervention research does not lead to a situation where the field advances only thanks to a handful of exceptionally large research centres, we also advocate that solutions need to be designed to lower the barriers to entry. Inspired by fields such as particle physics and astronomy, we claim that centralised very large innovation centres with state of the art technology and health technology assessment capabilities backed by core support staff and open interoperability standards need to be accessible to the wider computer-assisted intervention research community. Copyright © 2016. Published by Elsevier B.V.

Portable Wireless Device Threat Assessment for Aircraft Navigation Radios

NASA Technical Reports Server (NTRS)

Nguyen, Truong X.; Koppen, Sandra V.; Ely, Jay J.; Williams, Reuben A.; Smith, Laura J.; Salud, Maria Theresa P.

2004-01-01

This paper addresses the concern for Wireless Local Area Network devices and two-way radios to cause electromagnetic interference to aircraft navigation radio systems. Spurious radiated emissions from various IEEE 802.11a, 802.11b, and Bluetooth devices are characterized using reverberation chambers. The results are compared with baseline emissions from standard laptop computer and personal digital assistants (PDAs) that are currently allowed for use on aircraft. The results indicate that the WLAN devices tested are not more of a threat to aircraft navigation radios than standard laptop computers and PDAs in most aircraft bands. In addition, spurious radiated emission data from seven pairs of two-way radios are provided. These two-way radios emit at much higher levels in the bands considered. A description of the measurement process, device modes of operation and the measurement results are reported.

Brief History of Computer-Assisted Instruction at the Institute for Mathematical Studies in the Social Sciences.

ERIC Educational Resources Information Center

Stanford Univ., CA. Inst. for Mathematical Studies in Social Science.

In 1963, the Institute began a program of research and development in computer-assisted instruction (CAI). Their efforts have been funded at various times by the Carnegie Corporation of New York, The National Science Foundation and the United States Office of Education. Starting with a medium-sized computer and six student stations, the Institute…

Computer Assisted Virtual Environment - CAVE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Phillip; Podgorney, Robert; Weingartner,

Research at the Center for Advanced Energy Studies is taking on another dimension with a 3-D device known as a Computer Assisted Virtual Environment. The CAVE uses projection to display high-end computer graphics on three walls and the floor. By wearing 3-D glasses to create depth perception and holding a wand to move and rotate images, users can delve into data.

User's Guide to "MULE"; McGill University Language for Education. A Computer-Assisted Instruction Author Language.

ERIC Educational Resources Information Center

Roid, Gale H.

A computer-assisted instruction (CAI) author language and operating system is available for use by McGill instructors on the university's IBM 360/65 RAX Time-Sharing System. Instructors can use this system to prepare lessons which allow the computer and a student to "converse" in natural language. The instructor prepares a lesson by…

Algerian EFL University Teachers' Attitudes towards Computer Assisted Language Learning: The Case of Djilali Liabes University

ERIC Educational Resources Information Center

Bouchefra, Miloud; Baghoussi, Meriem

2017-01-01

Computer Assisted Language Learning (CALL) is still groping its way into Algerian English as a Foreign Language (EFL) classroom, where Information Communications Technologies (ICTs) are defined in terms of occasional use of computers and data projectors for material presentation in the classroom. Though major issues in the image of the lack of…

A Study of Effectiveness of Computer Assisted Instruction (CAI) over Classroom Lecture (CRL) at ICS Level

ERIC Educational Resources Information Center

Kaousar, Tayyeba; Choudhry, Bushra Naoreen; Gujjar, Aijaz Ahmed

2008-01-01

This study was aimed to evaluate the effectiveness of CAI vs. classroom lecture for computer science at ICS level. The objectives were to compare the learning effects of two groups with classroom lecture and computer-assisted instruction studying the same curriculum and the effects of CAI and CRL in terms of cognitive development. Hypotheses of…

A Review of Issues in Computer-Assisted Counseling and a New Approach to Its Applications in College Selection.

ERIC Educational Resources Information Center

Colburn, Kenneth A.

Issues and approaches in computer-assisted counseling are presented in this thesis. Reasons are considered for the ineffectiveness of school guidance counselors in helping students make college selections, and a reconceptualization of counseling as a technology of helping is suggested. The uses of computers in counseling are examined along with…

Computer Assisted Virtual Environment - CAVE

ScienceCinema

Erickson, Phillip; Podgorney, Robert; Weingartner,

2018-05-30

Research at the Center for Advanced Energy Studies is taking on another dimension with a 3-D device known as a Computer Assisted Virtual Environment. The CAVE uses projection to display high-end computer graphics on three walls and the floor. By wearing 3-D glasses to create depth perception and holding a wand to move and rotate images, users can delve into data.

The Applications of Computers in Education in Developing Countries--with Specific Reference to the Cost-Effectiveness of Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Lai, Kwok-Wing

Designed to examine the application and cost-effectiveness of computer-assisted instruction (CAI) for secondary education in developing countries, this document is divided into eight chapters. A general introduction defines the research problem, describes the research methodology, and provides definitions of key terms used throughout the paper.…

Computer Assisted Diagnostic Prescriptive Program in Reading and Mathematics. An Exemplary Micro-Computer Program and a Developer/Demonstrator Project, National Diffusion Network.

ERIC Educational Resources Information Center

Roberson, E. Wayne; Glowinski, Debra J.

The Computer Assisted Diagnostic Prescriptive Program (CADPP) is a customized databased curriculum management system which permits the user to load the following into a filing/retrieval software system: (1) learning characteristics of individual students (e.g., age, instructional level, learning modality); (2) skill-oriented characteristics of…

Turkish Teachers' and Students' Perceptions towards Computer Assisted Testing in Comparison with Spanish Teachers' and Students' Perceptions

ERIC Educational Resources Information Center

Berber, Aslihan; García Laborda, Jesús

2015-01-01

There are different opinions about using technology in the assessment field of education regarding computer-assisted assessments. People have some concerns such as its application, reliability and so on. It seems that those concerns may decrease with the developing technology in the following years since computer-based testing programs are…

Computer-Assisted Learning in Anatomy at the International Medical School in Debrecen, Hungary: A Preliminary Report

ERIC Educational Resources Information Center

Kish, Gary; Cook, Samuel A.; Kis, Greta

2013-01-01

The University of Debrecen's Faculty of Medicine has an international, multilingual student population with anatomy courses taught in English to all but Hungarian students. An elective computer-assisted gross anatomy course, the Computer Human Anatomy (CHA), has been taught in English at the Anatomy Department since 2008. This course focuses on an…

Biology Teacher and Expert Opinions about Computer Assisted Biology Instruction Materials: A Software Entitled Nucleic Acids and Protein Synthesis

ERIC Educational Resources Information Center

Hasenekoglu, Ismet; Timucin, Melih

2007-01-01

The aim of this study is to collect and evaluate opinions of CAI experts and biology teachers about a high school level Computer Assisted Biology Instruction Material presenting computer-made modelling and simulations. It is a case study. A material covering "Nucleic Acids and Protein Synthesis" topic was developed as the…

The Foundation and Development of Computer Assisted Instruction in the Field of Reading from Its Inception to the Present.

ERIC Educational Resources Information Center

Zuberman, Lea K.

This critical review and evaluation of the literature covers the field of computer assisted instruction (CAI) and reading from its inception to the present day. Seventeen research studies are discussed as well as four surveys of previous research in this field. Major issues addressed include the effectiveness of CAI and computer managed…

The effect of computer-assisted therapeutic practice for children with handwriting deficit: a comparison with the effect of the traditional sensorimotor approach.

PubMed

Chang, Shao-Hsia; Yu, Nan-Ying

2014-07-01

The objective of this study was to compare the effect of computer-assisted practice with the sensorimotor approach on the remediation of handwriting problems in children with dysgraphia. In a randomized controlled trial, experiments were conducted to verify the intervention effect. Forty two children with handwriting deficit were assigned to computer-assisted instruction, sensorimotor training, or a control group. Handwriting performance was measured using the elementary reading/writing test and computerized handwriting evaluation before and after 6 weeks of intervention. Repeated-measures ANOVA of changed scores were conducted to show whether statistically significant differences across the three groups were present. Significant differences in the elementary reading/writing test were found among the three groups. The computer group showed more significant improvements than the other two groups did. In the kinematic and kinetic analyses, the computer group showed promising results in the remediation of handwriting speed and fluency. This study provided clinical evidence for applying a computer-assisted handwriting program for children with dysgraphia. Clinicians and school teachers are provided with a systematic intervention for the improvement of handwriting difficulties. Copyright © 2014 Elsevier Ltd. All rights reserved.

Technician Program Uses Advanced Instruments.

ERIC Educational Resources Information Center

Stinson, Stephen

1981-01-01

Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

Computer-assisted preoperative simulation for positioning and fixation of plate in 2-stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery.

PubMed

Suenaga, Hideyuki; Taniguchi, Asako; Yonenaga, Kazumichi; Hoshi, Kazuto; Takato, Tsuyoshi

2016-01-01

Computer-assisted preoperative simulation surgery is employed to plan and interact with the 3D images during the orthognathic procedure. It is useful for positioning and fixation of maxilla by a plate. We report a case of maxillary retrusion by a bilateral cleft lip and palate, in which a 2-stage orthognathic procedure (maxillary advancement by distraction technique and mandibular setback surgery) was performed following a computer-assisted preoperative simulation planning to achieve the positioning and fixation of the plate. A high accuracy was achieved in the present case. A 21-year-old male patient presented to our department with a complaint of maxillary retrusion following bilateral cleft lip and palate. Computer-assisted preoperative simulation with 2-stage orthognathic procedure using distraction technique and mandibular setback surgery was planned. The preoperative planning of the procedure resulted in good aesthetic outcomes. The error of the maxillary position was less than 1mm. The implementation of the computer-assisted preoperative simulation for the positioning and fixation of plate in 2-stage orthognathic procedure using distraction technique and mandibular setback surgery yielded good results. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Robotic surgery

MedlinePlus

Robot-assisted surgery; Robotic-assisted laparoscopic surgery; Laparoscopic surgery with robotic assistance ... computer station and directs the movements of a robot. Small surgical tools are attached to the robot's ...

Focus on Methodology: Beyond paper and pencil: Conducting computer-assisted data collection with adolescents in group settings.

PubMed

Raffaelli, Marcela; Armstrong, Jessica; Tran, Steve P; Griffith, Aisha N; Walker, Kathrin; Gutierrez, Vanessa

2016-06-01

Computer-assisted data collection offers advantages over traditional paper and pencil measures; however, little guidance is available regarding the logistics of conducting computer-assisted data collection with adolescents in group settings. To address this gap, we draw on our experiences conducting a multi-site longitudinal study of adolescent development. Structured questionnaires programmed on laptop computers using Audio Computer Assisted Self-Interviewing (ACASI) were administered to groups of adolescents in community-based and afterschool programs. Although implementing ACASI required additional work before entering the field, we benefited from reduced data processing time, high data quality, and high levels of youth motivation. Preliminary findings from an ethnically diverse sample of 265 youth indicate favorable perceptions of using ACASI. Using our experiences as a case study, we provide recommendations on selecting an appropriate data collection device (including hardware and software), preparing and testing the ACASI, conducting data collection in the field, and managing data. Copyright © 2016 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Software For Monitoring A Computer Network

NASA Technical Reports Server (NTRS)

Lee, Young H.

1992-01-01

SNMAT is rule-based expert-system computer program designed to assist personnel in monitoring status of computer network and identifying defective computers, workstations, and other components of network. Also assists in training network operators. Network for SNMAT located at Space Flight Operations Center (SFOC) at NASA's Jet Propulsion Laboratory. Intended to serve as data-reduction system providing windows, menus, and graphs, enabling users to focus on relevant information. SNMAT expected to be adaptable to other computer networks; for example in management of repair, maintenance, and security, or in administration of planning systems, billing systems, or archives.

Using CamiTK for rapid prototyping of interactive computer assisted medical intervention applications.

PubMed

Promayon, Emmanuel; Fouard, Céline; Bailet, Mathieu; Deram, Aurélien; Fiard, Gaëlle; Hungr, Nikolai; Luboz, Vincent; Payan, Yohan; Sarrazin, Johan; Saubat, Nicolas; Selmi, Sonia Yuki; Voros, Sandrine; Cinquin, Philippe; Troccaz, Jocelyne

2013-01-01

Computer Assisted Medical Intervention (CAMI hereafter) is a complex multi-disciplinary field. CAMI research requires the collaboration of experts in several fields as diverse as medicine, computer science, mathematics, instrumentation, signal processing, mechanics, modeling, automatics, optics, etc. CamiTK is a modular framework that helps researchers and clinicians to collaborate together in order to prototype CAMI applications by regrouping the knowledge and expertise from each discipline. It is an open-source, cross-platform generic and modular tool written in C++ which can handle medical images, surgical navigation, biomedicals simulations and robot control. This paper presents the Computer Assisted Medical Intervention ToolKit (CamiTK) and how it is used in various applications in our research team.

Experimental Characterization and Simulation of Slip Transfer at Grain Boundaries and Microstructurally-Sensitive Crack Propagation

NASA Technical Reports Server (NTRS)

Gupta, Vipul; Hochhalter, Jacob; Yamakov, Vesselin; Scott, Willard; Spear, Ashley; Smith, Stephen; Glaessgen, Edward

2013-01-01

A systematic study of crack tip interaction with grain boundaries is critical for improvement of multiscale modeling of microstructurally-sensitive fatigue crack propagation and for the computationally-assisted design of more durable materials. In this study, single, bi- and large-grain multi-crystal specimens of an aluminum-copper alloy are fabricated, characterized using electron backscattered diffraction (EBSD), and deformed under tensile loading and nano-indentation. 2D image correlation (IC) in an environmental scanning electron microscope (ESEM) is used to measure displacements near crack tips, grain boundaries and within grain interiors. The role of grain boundaries on slip transfer is examined using nano-indentation in combination with high-resolution EBSD. The use of detailed IC and EBSD-based experiments are discussed as they relate to crystal-plasticity finite element (CPFE) model calibration and validation.

Computer-assisted learning in anatomy at the international medical school in Debrecen, Hungary: a preliminary report.

PubMed

Kish, Gary; Cook, Samuel A; Kis, Gréta

2013-01-01

The University of Debrecen's Faculty of Medicine has an international, multilingual student population with anatomy courses taught in English to all but Hungarian students. An elective computer-assisted gross anatomy course, the Computer Human Anatomy (CHA), has been taught in English at the Anatomy Department since 2008. This course focuses on an introduction to anatomical digital images along with clinical cases. This low-budget course has a large visual component using images from magnetic resonance imaging and computer axial tomogram scans, ultrasound clinical studies, and readily available anatomy software that presents topics which run in parallel to the university's core anatomy curriculum. From the combined computer images and CHA lecture information, students are asked to solve computer-based clinical anatomy problems in the CHA computer laboratory. A statistical comparison was undertaken of core anatomy oral examination performances of English program first-year medical students who took the elective CHA course and those who did not in the three academic years 2007-2008, 2008-2009, and 2009-2010. The results of this study indicate that the CHA-enrolled students improved their performance on required anatomy core curriculum oral examinations (P < 0.001), suggesting that computer-assisted learning may play an active role in anatomy curriculum improvement. These preliminary results have prompted ongoing evaluation of what specific aspects of CHA are valuable and which students benefit from computer-assisted learning in a multilingual and diverse cultural environment. Copyright © 2012 American Association of Anatomists.

Framework for Computer Assisted Instruction Courseware: A Case Study.

ERIC Educational Resources Information Center

Betlach, Judith A.

1987-01-01

Systematically investigates, defines, and organizes variables related to production of internally designed and implemented computer assisted instruction (CAI) courseware: special needs of users; costs; identification and definition of realistic training needs; CAI definition and design methodology; hardware and software requirements; and general…

Index to Computer Assisted Instruction.

ERIC Educational Resources Information Center

Lekan, Helen A., Ed.

The computer assisted instruction (CAI) programs and projects described in this index are listed by subject matter. The index gives the program name, author, source, description, prerequisites, level of instruction, type of student, average completion time, logic and program, purpose for which program was designed, supplementary…

VRML Industry: Microcosms in the Making.

ERIC Educational Resources Information Center

Brown, Eric

1998-01-01

Discusses VRML (Virtual Reality Modeling Language) technology and some of its possible applications, including creating three-dimensional images on the Web, advertising, and data visualization in computer-assisted design and computer-assisted manufacturing (CAD/CAM). Future improvements are discussed, including streaming, database support, and…

Computer-Assisted Programmed Instruction in Textiles.

ERIC Educational Resources Information Center

Kean, Rita C.; Laughlin, Joan

Students in an introductory textiles course at the University of Nebraska's College of Home Economics actively participate in the learning experience through a self-paced instructional technique. Specific learning packets were developed adapting programmed instructional learning materials to computer assisted instruction (CAI). A study booklet…

Is the addition of an assisted driving Hamiltonian always useful for adiabatic evolution?

NASA Astrophysics Data System (ADS)

Sun, Jie; Lu, Songfeng; Li, Li

2017-04-01

It has been known that when an assisted driving item is added to the main system Hamiltonian, the efficiency of the resultant adiabatic evolution can be significantly improved. In some special cases, it can be seen that only through adding an assisted driving Hamiltonian can the resulting adiabatic evolution be made not to fail. Thus the additional driving Hamiltonian plays an important role in adiabatic computing. In this paper, we show that if the driving Hamiltonian is chosen inappropriately, the adiabatic computation may still fail. More importantly, we find that the adiabatic computation can only succeed if the assisted driving Hamiltonian has a relatively fixed form. This may help us understand why in the related literature all of the driving Hamiltonians used share the same form.

[Cost analysis for navigation in knee endoprosthetics].

PubMed

Cerha, O; Kirschner, S; Günther, K-P; Lützner, J

2009-12-01

Total knee arthroplasty (TKA) is one of the most frequent procedures in orthopaedic surgery. The outcome depends on a range of factors including alignment of the leg and the positioning of the implant in addition to patient-associated factors. Computer-assisted navigation systems can improve the restoration of a neutral leg alignment. This procedure has been established especially in Europe and North America. The additional expenses are not reimbursed in the German DRG system (Diagnosis Related Groups). In the present study a cost analysis of computer-assisted TKA compared to the conventional technique was performed. The acquisition expenses of various navigation systems (5 and 10 year depreciation), annual costs for maintenance and software updates as well as the accompanying costs per operation (consumables, additional operating time) were considered. The additional operating time was determined on the basis of a meta-analysis according to the current literature. Situations with 25, 50, 100, 200 and 500 computer-assisted TKAs per year were simulated. The amount of the incremental costs of the computer-assisted TKA depends mainly on the annual volume and the additional operating time. A relevant decrease of the incremental costs was detected between 50 and 100 procedures per year. In a model with 100 computer-assisted TKAs per year an additional operating time of 14 mins and a 10 year depreciation of the investment costs, the incremental expenses amount to 300-395 depending on the navigation system. Computer-assisted TKA is associated with additional costs. From an economical point of view an amount of more than 50 procedures per year appears to be favourable. The cost-effectiveness could be estimated if long-term results will show a reduction of revisions or a better clinical outcome.

A comparative study between xerographic, computer-assisted overlay generation and animated-superimposition methods in bite mark analyses.

PubMed

Tai, Meng Wei; Chong, Zhen Feng; Asif, Muhammad Khan; Rahmat, Rabiah A; Nambiar, Phrabhakaran

2016-09-01

This study was to compare the suitability and precision of xerographic and computer-assisted methods for bite mark investigations. Eleven subjects were asked to bite on their forearm and the bite marks were photographically recorded. Alginate impressions of the subjects' dentition were taken and their casts were made using dental stone. The overlays generated by xerographic method were obtained by photocopying the subjects' casts and the incisal edge outlines were then transferred on a transparent sheet. The bite mark images were imported into Adobe Photoshop® software and printed to life-size. The bite mark analyses using xerographically generated overlays were done by comparing an overlay to the corresponding printed bite mark images manually. In computer-assisted method, the subjects' casts were scanned into Adobe Photoshop®. The bite mark analyses using computer-assisted overlay generation were done by matching an overlay and the corresponding bite mark images digitally using Adobe Photoshop®. Another comparison method was superimposing the cast images with corresponding bite mark images employing the Adobe Photoshop® CS6 and GIF-Animator©. A score with a range of 0-3 was given during analysis to each precision-determining criterion and the score was increased with better matching. The Kruskal Wallis H test showed significant difference between the three sets of data (H=18.761, p<0.05). In conclusion, bite mark analysis using the computer-assisted animated-superimposition method was the most accurate, followed by the computer-assisted overlay generation and lastly the xerographic method. The superior precision contributed by digital method is discernible despite the human skin being a poor recording medium of bite marks. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

X-Ray Radiography of Gas Turbine Ceramics.

DTIC Science & Technology

1979-10-20

Microfocus X-ray equipment. 1a4ihe definition of equipment concepts for a computer assisted tomography ( CAT ) system; and 4ffthe development of a CAT ...were obtained from these test coupons using Microfocus X-ray and image en- hancement techniques. A Computer Assisted Tomography ( CAT ) design concept...monitor. Computer reconstruction algorithms were investigated with respect to CAT and a preferred approach was determined. An appropriate CAT algorithm

Improved Computer-Aided Instruction by the Use of Interfaced Random-Access Audio-Visual Equipment. Report on Research Project No. P/24/1.

ERIC Educational Resources Information Center

Bryce, C. F. A.; Stewart, A. M.

A brief review of the characteristics of computer assisted instruction and the attributes of audiovisual media introduces this report on a project designed to improve the effectiveness of computer assisted learning through the incorporation of audiovisual materials. A discussion of the implications of research findings on the design and layout of…

Translations on USSR Science and Technology Physical Sciences and Technology No. 18

DTIC Science & Technology

1977-09-19

and Avetik Gukasyan discuss component arrangement alternatives. COPYRIGHT: Notice not available 8545 CSO: 1870 CYBERNETICS, COMPUTERS AND...1974. COPYRIGHT: Notice not available 8545 CSO: 1870 CYBERNETICS, COMPUTERS AND AUTOMATION TECHNOLOGY ’PROYEKC’ COMPUTER-ASSISTED DESIGN SYSTEM...throughout the world are struggling. The "Proyekt" system, produced in the Institute of Cybernetics, assists in automating the design and manufacture of

[Health technology assessment report: Computer-assisted Pap test for cervical cancer screening].

PubMed

Della Palma, Paolo; Moresco, Luca; Giorgi Rossi, Paolo

2012-01-01

HEALTH PROBLEM: Cervical cancer is a disease which is highly preventable by means of Pap test screening for the precancerous lesions, which can be easily treated. Furthermore, in the near future, control of the disease will be enhanced by the vaccination which prevents the infection of those human papillomavirus types that cause the vast majority of cervical cancers. The effectiveness of screening in drastically reducing cervical cancer incidence has been clearly demonstrated. The epidemiology of cervical cancer in industrialised countries is now determined mostly by the Pap test coverage of the female population and by the ability of health systems to assure appropriate follow up after an abnormal Pap test. Today there are two fully automated systems for computer-assisted Pap test: the BD FocalPoint and the Hologic Imager. Recently, the Hologic Integrated Imager, a semi-automated system, was launched. The two fully automated systems are composed of a central scanner, where the machine examines the cytologic slide, and of one or more review stations, where the cytologists analyze the slides previously centrally scanned. The softwares used by the two systems identify the fields of interest so that the cytologists can look only at those points, automatically pointed out by the review station. Furthermore, the FocalPoint system classifies the slides according to their level of risk of containing signs of relevant lesions. Those in the upper classes--about one fifth of the slides--are labelled as « further review », while those in the lower level of risk, i.e. slides that have such a low level of risk that they can be considered as negative with no human review, are labelled as « no further review ». The aim of computer-assisted Pap test is to reduce the time of slide examination and to increase productivity. Furthermore, the number of errors due to lack of attention may decrease. Both the systems can be applied to liquidbased cytology, while only the BD Focal Point can be used on conventional smears. Cytology screening has some critical points: there is a shortage of cytologists/cytotechnicians; the quality strongly depends on the experience and ability of the cytologist; there is a subjective component in the cytological diagnosis; in highly screened populations, the prevalence of lesions is very low and the activity of cytologists is very monotonous. On the other hand, a progressive shift to molecular screening using HPV-DNA test as primary screening test is very likely in the near future; cytology will be used as triage test, dramatically reducing the number of slides to process and increasing the prevalence of lesions in those Pap tests. In this Report we assume that the diagnostic accuracy of computer-assisted Pap test is equal to the accuracy of manual Pap test and, consequently, that screening using computer-assisted Pap test has the same efficacy in reducing cervical cancer incidence and mortality. Under this assumption, the effectiveness/ benefit/utility is the same for the two screening modes, i.e. the economic analysis will be a cost minimization study. Furthermore, the screening process is identical for the two modalities in all the phases except for slide interpretation. The cost minimization analysis will be limited to the only phase differing between the two modes, i.e. the study will be a differential cost analysis between a labour-intensive strategy (traditional Pap test) and a technology-intensive strategy (the computer-assisted Pap test). Briefly, the objectives of this HTA Report are: to determine the break even point of computer-assisted Pap test systems, i.e. the volume of slides processed per year at which putting in place a computer-assisted Pap test system becomes economically convenient; to quantify the cost per Pap test in different scenarios according to screening centre activity volume, productivity of cytologist, type of cytology (conventional smear or liquid-based, fully automated or semi-automated computer-assisted); to analyse the computer-assisted Pap test in the Italian context, through a survey of the centres using the technology, collecting data useful for the sensitivity analysis of the economic evaluation; to evaluate the acceptability of the technology in the screening services; to evaluate the organizational and financial impact of the computer-assisted Pap test in different scenarios; to illustrate the ideal organization to implement computer-assisted Pap test in terms of volume of activity, productivity, and human and technological resources. to produce this Report, the following process was adopted: application to the Ministry of health for a grant « Analysis of the impact of professional involvement in evidence generation for the HTA process »; within this project, the sub-project « Cost effectiveness evaluation of the computer-assisted Pap test in the Italian screening programmes » was financed; constitution of the Working Group, which included the project coordinator, the principal investigator, and the health economist; identification of the centres using the computer-assisted Pap test and which had published scientific reports on the subject; identification of the Consulting Committee (stakeholder), which included screening programmes managers, pathologists, economists, health policy-makers, citizen organizations, and manufacturers. Once the evaluation was concluded, a plenary meeting with Working Group and Consulting Committee was held. The working group drafted the final version of this Report, which took into account the comments received. the fully automated computer-assisted Pap test has an important financial and organizational impact on screening programmes. The assessment of this health technology reached the following conclusions: according to the survey results, after some distrust, cytologists accepted the use of the machine and appreciated the reduction in interpretation time and the reliability in identifying the fields of interest; from an economic point of view, the automated computer-assisted Pap test can be convenient only with conventional smears if the screening centre has a volume of more than 49,000 slides/year and the cytologist productivity increases about threefold. It must be highlighted that it is not sufficient to adopt the automated Pap test to reach such an increase in productivity; the laboratory must be organised or re-organised to optimise the use of the review stations and the person time. In the case of liquid-based cytology, the adoption of automated computer- assisted Pap test can only increase the costs. In fact, liquid-based cytology increases the cost of consumable materials but reduces the interpretation time, even in manual screening. Consequently, the reduction of human costs is smaller in the case of computer-assisted screening. Liquid-based cytology has other implications and advantages not linked to the use of computer-assisted Pap test that should be taken into account and are beyond the scope of this Report; given that the computer-assisted Pap test reduces human costs, it may be more advantageous where the cost of cytologists is higher; given the relatively small volume of activity of screening centres in Italy, computer-assisted Pap test may be reasonable for a network using only one central scanner and several remote review stations; the use of automated computer-assisted Pap test only for quality control in a single centre is not economically sustainable. In this case as well, several centres, for example at the regional level, may form a consortium to reach a reasonable number of slides to achieve the break even point. Regarding the use of a machine rather than human intelligence to interpret the slides, some ethical issues were initially raised, but both the scientific community and healthcare professionals have accepted this technology. The identification of fields of interest by the machine is highly reproducible, reducing subjectivity in the diagnostic process. The Hologic system always includes a check by the human eye, while the FocalPoint system identifies about one fifth of the slides as No Further Review. Several studies, some of which conducted in Italy, confirmed the reliability of this classification. There is still some resistance to accept the practice of No Further Review. A check of previous slides and clinical data can be useful to make the cytologist and the clinician more confident. Computer-assisted automated Pap test may be introduced only if there is a need to increase the volume of slides screened to cover the screening target population and sufficient human resources are not available. Switching a programme using conventional slides to automatic scanning can only lead to a reduction in costs if the volume of slides per year exceeds 49,000 slides/annum and cytologist productivity is optimised to more than 20,000 slides per year. At a productivity of 15,000 or fewer, the automated computer-assisted Pap test cannot be convenient. Switching from manual screening with conventional slides to automatic scanning with liquid-based cytology cannot generate any economic saving, but the system could increase output with a given number of staff. The transition from manual to computer assisted automated screening of liquid based cytology will not generate savings and the increase in productivity will be lower than that of the switch from manual/conventional to automated/conventional. The use of biologists or pathologists as cytologists is more costly than the use of cytoscreeners. Given that the automated computer-assisted Pap test reduces human resource costs, its adoption in a model using only biologists and pathologists for screening is more economically advantageous. (ABSTRACT TRUNCATED)

Computer-assisted adjuncts for aneurysmal morphologic assessment: toward more precise and accurate approaches

NASA Astrophysics Data System (ADS)

Rajabzadeh-Oghaz, Hamidreza; Varble, Nicole; Davies, Jason M.; Mowla, Ashkan; Shakir, Hakeem J.; Sonig, Ashish; Shallwani, Hussain; Snyder, Kenneth V.; Levy, Elad I.; Siddiqui, Adnan H.; Meng, Hui

2017-03-01

Neurosurgeons currently base most of their treatment decisions for intracranial aneurysms (IAs) on morphological measurements made manually from 2D angiographic images. These measurements tend to be inaccurate because 2D measurements cannot capture the complex geometry of IAs and because manual measurements are variable depending on the clinician's experience and opinion. Incorrect morphological measurements may lead to inappropriate treatment strategies. In order to improve the accuracy and consistency of morphological analysis of IAs, we have developed an image-based computational tool, AView. In this study, we quantified the accuracy of computer-assisted adjuncts of AView for aneurysmal morphologic assessment by performing measurement on spheres of known size and anatomical IA models. AView has an average morphological error of 0.56% in size and 2.1% in volume measurement. We also investigate the clinical utility of this tool on a retrospective clinical dataset and compare size and neck diameter measurement between 2D manual and 3D computer-assisted measurement. The average error was 22% and 30% in the manual measurement of size and aneurysm neck diameter, respectively. Inaccuracies due to manual measurements could therefore lead to wrong treatment decisions in 44% and inappropriate treatment strategies in 33% of the IAs. Furthermore, computer-assisted analysis of IAs improves the consistency in measurement among clinicians by 62% in size and 82% in neck diameter measurement. We conclude that AView dramatically improves accuracy for morphological analysis. These results illustrate the necessity of a computer-assisted approach for the morphological analysis of IAs.

A computer-assisted personnel data system for a hospital department of dietetics. I. Development of the data base.

PubMed

Shick, G L; Hoover, L W; Moore, A N

1979-04-01

A data base was developed for a computer-assisted personnel data system for a university hospital department of dietetics which would store data on employees' employment, personnel information, attendance records, and termination. Development of the data base required designing computer programs and files, coding directions and forms for card input, and forms and procedures for on-line transmission. A program was written to compute accrued vacation, sick leave, and holiday time, and to generate historical records.

The use of wireless laptop computers for computer-assisted learning in pharmacokinetics.

PubMed

Munar, Myrna Y; Singh, Harleen; Belle, Donna; Brackett, Carolyn C; Earle, Sandra B

2006-02-15

To implement computer-assisted learning workshops into pharmacokinetics courses in a doctor of pharmacy (PharmD) program. Workshops were designed for students to utilize computer software programs on laptop computers to build pharmacokinetic models to predict drug concentrations resulting from various dosage regimens. In addition, students were able to visualize through graphing programs how altering different parameters changed drug concentration-time curves. Surveys were conducted to measure students' attitudes toward computer technology before and after implementation. Finally, traditional examinations were used to evaluate student learning. Doctor of pharmacy students responded favorably to the use of wireless laptop computers in problem-based pharmacokinetic workshops. Eighty-eight percent (n = 61/69) and 82% (n = 55/67) of PharmD students completed surveys before and after computer implementation, respectively. Prior to implementation, 95% of students agreed that computers would enhance learning in pharmacokinetics. After implementation, 98% of students strongly agreed (p < 0.05) that computers enhanced learning. Examination results were significantly higher after computer implementation (89% with computers vs. 84% without computers; p = 0.01). Implementation of wireless laptop computers in a pharmacokinetic course enabled students to construct their own pharmacokinetic models that could respond to changing parameters. Students had greater comprehension and were better able to interpret results and provide appropriate recommendations. Computer-assisted pharmacokinetic techniques can be powerful tools when making decisions about drug therapy.

The Use of Wireless Laptop Computers for Computer-Assisted Learning in Pharmacokinetics

PubMed Central

Munar, Myrna Y.; Singh, Harleen; Belle, Donna; Brackett, Carolyn C.; Earle, Sandra B.

2006-01-01

Objective To implement computer-assisted learning workshops into pharmacokinetics courses in a doctor of pharmacy (PharmD) program. Design Workshops were designed for students to utilize computer software programs on laptop computers to build pharmacokinetic models to predict drug concentrations resulting from various dosage regimens. In addition, students were able to visualize through graphing programs how altering different parameters changed drug concentration-time curves. Surveys were conducted to measure students’ attitudes toward computer technology before and after implementation. Finally, traditional examinations were used to evaluate student learning. Assessment Doctor of pharmacy students responded favorably to the use of wireless laptop computers in problem-based pharmacokinetic workshops. Eighty-eight percent (n = 61/69) and 82% (n = 55/67) of PharmD students completed surveys before and after computer implementation, respectively. Prior to implementation, 95% of students agreed that computers would enhance learning in pharmacokinetics. After implementation, 98% of students strongly agreed (p < 0.05) that computers enhanced learning. Examination results were significantly higher after computer implementation (89% with computers vs. 84% without computers; p = 0.01). Conclusion Implementation of wireless laptop computers in a pharmacokinetic course enabled students to construct their own pharmacokinetic models that could respond to changing parameters. Students had greater comprehension and were better able to interpret results and provide appropriate recommendations. Computer-assisted pharmacokinetic techniques can be powerful tools when making decisions about drug therapy. PMID:17136147

Ethical and Professional Issues in Computer-Assisted Therapy.

ERIC Educational Resources Information Center

Ford, B. Douglas

1993-01-01

Discusses ethical and professional issues in psychology regarding computer-assisted therapy (CAT). Topics addressed include an explanation of CAT; whether CAT is psychotherapy; software, including independent use, validation of effectiveness, and restricted access; clinician resistance; client acceptance; the impact on ethical standards; and a…

Online Assistants in Children's Hypermedia Software

ERIC Educational Resources Information Center

Garcia, Penny Ann

2002-01-01

The classroom teacher's comfort and familiarity with computers and software influences student-computer use in the classroom. Teachers remain mired in repetitive introduction of basic software mechanics and rarely progress with students to advanced concepts or complex applications. An Online Assistant (OLA) was developed to accompany the…

The Organization and Evaluation of a Computer-Assisted, Centralized Immunization Registry.

ERIC Educational Resources Information Center

Loeser, Helen; And Others

1983-01-01

Evaluation of a computer-assisted, centralized immunization registry after one year shows that 93 percent of eligible health practitioners initially agreed to provide data and that 73 percent continue to do so. Immunization rates in audited groups have improved significantly. (GC)

Computer Assistance for Writing Interactive Programs: TICS.

ERIC Educational Resources Information Center

Kaplow, Roy; And Others

1973-01-01

Investigators developed an on-line, interactive programing system--the Teacher-Interactive Computer System (TICS)--to provide assistance to those who were not programers, but nevertheless wished to write interactive instructional programs. TICS had two components: an author system and a delivery system. Underlying assumptions were that…

Why Virtual, Why Environments? Implementing Virtual Reality Concepts in Computer-Assisted Language Learning.

ERIC Educational Resources Information Center

Schwienhorst, Klaus

2002-01-01

Discussion of computer-assisted language learning focuses on the benefits of virtual reality environments, particularly for foreign language contexts. Topics include three approaches to learner autonomy; supporting reflection, including self-awareness; supporting interaction, including collaboration; and supporting experimentation, including…

Computer-Assisted Microscopy in Science Teaching and Research.

ERIC Educational Resources Information Center

Radice, Gary P.

1997-01-01

Describes a technological approach to teaching the relationships between biological form and function. Computer-assisted image analysis was integrated into a microanatomy course. Students spend less time memorizing and more time observing, measuring, and interpreting, building technical and analytical skills. Appendices list hardware and software…

76 FR 12935 - Proposed Information Collection; Comment Request; The American Community Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

... to conduct interviews via Computer-assisted Telephone Interviews (CATI). We will also conduct Computer-assisted Personal Interviews (CAPI) for a sub sample of nonrespondents. A content reinterview will... representatives (FRs) will conduct personal interviews with respondents to complete questionnaires or, if...

Giraffe, a Computer Assisted Instruction Programme.

ERIC Educational Resources Information Center

Boekhorst, Albert K.; Groot, Tineke

In 1989 a two year collaborative project, CAI (Computer Assisted Instruction) & Humanities, was initiated between the Faculty of Arts and IBM Netherlands during which General Information Retrieval All Faculties For Bibliographic Education (GIRAFFE), a program for the retrieval of information on general bibliographies, was developed. The…

Computer-Assisted Laboratory Stations.

ERIC Educational Resources Information Center

Snyder, William J., Hanyak, Michael E.

1985-01-01

Describes the advantages and features of computer-assisted laboratory stations for use in a chemical engineering program. Also describes a typical experiment at such a station: determining the response times of a solid state humidity sensor at various humidity conditions and developing an empirical model for the sensor. (JN)

Implementation of audio computer-assisted interviewing software in HIV/AIDS research.

PubMed

Pluhar, Erika; McDonnell Holstad, Marcia; Yeager, Katherine A; Denzmore-Nwagbara, Pamela; Corkran, Carol; Fielder, Bridget; McCarty, Frances; Diiorio, Colleen

2007-01-01

Computer-assisted interviewing (CAI) has begun to play a more prominent role in HIV/AIDS prevention research. Despite the increased popularity of CAI, particularly audio computer-assisted self-interviewing (ACASI), some research teams are still reluctant to implement ACASI technology because of lack of familiarity with the practical issues related to using these software packages. The purpose of this report is to describe the implementation of one particular ACASI software package, the Questionnaire Development System (QDS; Nova Research Company, Bethesda, MD), in several nursing and HIV/AIDS prevention research settings. The authors present acceptability and satisfaction data from two large-scale public health studies in which they have used QDS with diverse populations. They also address issues related to developing and programming a questionnaire; discuss practical strategies related to planning for and implementing ACASI in the field, including selecting equipment, training staff, and collecting and transferring data; and summarize advantages and disadvantages of computer-assisted research methods.

A randomized, controlled trial of interactive, multimedia software for patient colonoscopy education.

PubMed

Shaw, M J; Beebe, T J; Tomshine, P A; Adlis, S A; Cass, O W

2001-02-01

The purpose of our study was to assess the effectiveness of computer-assisted instruction (CAI) in patients having colonoscopies. We conducted a randomized, controlled trial in large, multispecialty clinic. Eighty-six patients were referred for colonoscopies. The interventions were standard education versus standard education plus CAI, and the outcome measures were anxiety, comprehension, and satisfaction. Computer-assisted instruction had no effect on patients' anxiety. The group receiving CAI demonstrated better overall comprehension (p < 0.001). However, Comprehension of certain aspects of serious complications and appropriate postsedation behavior were unaffected by educational method. Patients in the CAI group were more likely to indicate satisfaction with the amount of information provided when compared with the standard education counterparts (p = 0.001). Overall satisfaction was unaffected by educational method. Computer-assisted instruction for colonoscopy provided better comprehension and greater satisfaction with the adequacy of education than standard education. Computer-assisted instruction helps physicians meet their educational responsibilities with no decrement to the interpersonal aspects of the patient-physician relationship.

A computer-assisted data collection system for use in a multicenter study of American Indians and Alaska Natives: SCAPES.

PubMed

Edwards, Roger L; Edwards, Sandra L; Bryner, James; Cunningham, Kelly; Rogers, Amy; Slattery, Martha L

2008-04-01

We describe a computer-assisted data collection system developed for a multicenter cohort study of American Indian and Alaska Native people. The study computer-assisted participant evaluation system or SCAPES is built around a central database server that controls a small private network with touch screen workstations. SCAPES encompasses the self-administered questionnaires, the keyboard-based stations for interviewer-administered questionnaires, a system for inputting medical measurements, and administrative tasks such as data exporting, backup and management. Elements of SCAPES hardware/network design, data storage, programming language, software choices, questionnaire programming including the programming of questionnaires administered using audio computer-assisted self-interviewing (ACASI), and participant identification/data security system are presented. Unique features of SCAPES are that data are promptly made available to participants in the form of health feedback; data can be quickly summarized for tribes for health monitoring and planning at the community level; and data are available to study investigators for analyses and scientific evaluation.

Computer-assisted diagnostic tool to quantify the pulmonary veins in sickle cell associated pulmonary hypertension

NASA Astrophysics Data System (ADS)

Jajamovich, Guido H.; Pamulapati, Vivek; Alam, Shoaib; Mehari, Alem; Kato, Gregory J.; Wood, Bradford J.; Linguraru, Marius George

2012-03-01

Pulmonary hypertension is a common cause of death among patients with sickle cell disease. This study investigates the use of pulmonary vein analysis to assist the diagnosis of pulmonary hypertension non-invasively with CT-Angiography images. The characterization of the pulmonary veins from CT presents two main challenges. Firstly, the number of pulmonary veins is unknown a priori and secondly, the contrast material is degraded when reaching the pulmonary veins, making the edges of these vessels to appear faint. Each image is first denoised and a fast marching approach is used to segment the left atrium and pulmonary veins. Afterward, a geodesic active contour is employed to isolate the left atrium. A thinning technique is then used to extract the skeleton of the atrium and the veins. The locations of the pulmonary veins ostia are determined by the intersection of the skeleton and the contour of the atrium. The diameters of the pulmonary veins are measured in each vein at fixed distances from the corresponding ostium, and for each distance, the sum of the diameters of all the veins is computed. These indicators are shown to be significantly larger in sickle-cell patients with pulmonary hypertension as compared to controls (p-values < 0.01).

A random forest learning assisted "divide and conquer" approach for peptide conformation search.

PubMed

Chen, Xin; Yang, Bing; Lin, Zijing

2018-06-11

Computational determination of peptide conformations is challenging as it is a problem of finding minima in a high-dimensional space. The "divide and conquer" approach is promising for reliably reducing the search space size. A random forest learning model is proposed here to expand the scope of applicability of the "divide and conquer" approach. A random forest classification algorithm is used to characterize the distributions of the backbone φ-ψ units ("words"). A random forest supervised learning model is developed to analyze the combinations of the φ-ψ units ("grammar"). It is found that amino acid residues may be grouped as equivalent "words", while the φ-ψ combinations in low-energy peptide conformations follow a distinct "grammar". The finding of equivalent words empowers the "divide and conquer" method with the flexibility of fragment substitution. The learnt grammar is used to improve the efficiency of the "divide and conquer" method by removing unfavorable φ-ψ combinations without the need of dedicated human effort. The machine learning assisted search method is illustrated by efficiently searching the conformations of GGG/AAA/GGGG/AAAA/GGGGG through assembling the structures of GFG/GFGG. Moreover, the computational cost of the new method is shown to increase rather slowly with the peptide length.

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

PubMed

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-01-01

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

PubMed

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-06-27

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Computer-assisted versus oral-and-written family history taking for identifying people with elevated risk of type 2 diabetes mellitus.

PubMed

Pappas, Yannis; Wei, Igor; Car, Josip; Majeed, Azeem; Sheikh, Aziz

2011-12-07

Diabetes is a chronic illness characterised by insulin resistance or deficiency, resulting in elevated glycosylated haemoglobin A1c (HbA1c) levels. Because diabetes tends to run in families, the collection of data is an important tool for identifying people with elevated risk of type2 diabetes. Traditionally, oral-and-written data collection methods are employed but computer-assisted history taking systems (CAHTS) are increasingly used. Although CAHTS were first described in the 1960s, there remains uncertainty about the impact of these methods on family history taking, clinical care and patient outcomes such as health-related quality of life.  To assess the effectiveness of computer-assisted versus oral-and-written family history taking for identifying people with elevated risk of developing type 2 diabetes mellitus. We searched The Cochrane Library (issue 6, 2011), MEDLINE (January 1985 to June 2011), EMBASE (January 1980 to June 2011) and CINAHL (January 1981 to June 2011). Reference lists of obtained articles were also pursued further and no limits were imposed on languages and publication status. Randomised controlled trials of computer-assisted versus oral-and-written history taking in adult participants (16 years and older). Two authors independently scanned the title and abstract of retrieved articles. Potentially relevant articles were investigated as full text. Studies that met the inclusion criteria were abstracted for relevant population and intervention characteristics with any disagreements resolved by discussion, or by a third party. Risk of bias was similarly assessed independently. We found no controlled trials on computer-assisted versus oral-and-written family history taking for identifying people with elevated risk of type 2 diabetes mellitus. There is a need to develop an evidence base to support the effective development and use of computer-assisted history taking systems in this area of practice. In the absence of evidence on effectiveness, the implementation of computer-assisted family history taking for identifying people with elevated risk of type 2 diabetes may only rely on the clinicians' tacit knowledge, published monographs and viewpoint articles.

Computer Assisted Navigation in Knee Arthroplasty

PubMed Central

Bae, Dae Kyung

2011-01-01

Computer assisted surgery (CAS) was used to improve the positioning of implants during total knee arthroplasty (TKA). Most studies have reported that computer assisted navigation reduced the outliers of alignment and component malpositioning. However, additional sophisticated studies are necessary to determine if the improvement of alignment will improve long-term clinical results and increase the survival rate of the implant. Knowledge of CAS-TKA technology and understanding the advantages and limitations of navigation are crucial to the successful application of the CAS technique in TKA. In this article, we review the components of navigation, classification of the system, surgical method, potential error, clinical results, advantages, and disadvantages. PMID:22162787

Inviting Success in Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Henderson, Catherine

This paper reviews briefly the essential characteristics of both invitational education and computer assisted instruction (CAI) and the ways in which coordination of these two models can produce stimulating and valuable educational experiences for students. A matrix illustrates the characteristics of CAI which can support the major values of…

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances

ERIC Educational Resources Information Center

Zou, Bin; Xing, Minjie; Wang, Yuping; Sun, Mingyu; Xiang, Catherine H.

2013-01-01

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances highlights new research and an original framework that brings together foreign language teaching, experiments and testing practices that utilize the most recent and widely used e-learning resources. This comprehensive collection of research will offer linguistic…

Perceptions of University Students regarding Computer Assisted Assessment

ERIC Educational Resources Information Center

Jamil, Mubashrah

2012-01-01

Computer assisted assessment (CAA) is a common technique of assessment in higher educational institutions in Western countries, but a relatively new concept for students and teachers in Pakistan. It was therefore interesting to investigate students' perceptions about CAA practices from different universities of Pakistan. Information was collected…

Antecedent Knowledge and Intelligent Computer Assisted Instruction.

ERIC Educational Resources Information Center

Woodward, John P.; Carnine, Douglas W.

1988-01-01

The article reviews Intelligent Computer Assisted Instruction (ICAI), an area of artificial intelligence and notes its shortcomings for learning disabled students. It is suggested that emphasis on antecedent knowledge (important facts, concepts, rules, and/or strategies for the content area) and content analysis and design techniques would make…

FMS: The New Wave of Manufacturing Technology.

ERIC Educational Resources Information Center

Industrial Education, 1986

1986-01-01

Flexible manufacturing systems (FMS) are described as a marriage of all of the latest technologies--robotics, numerical control, CAD/CAM (computer-assisted design/computer-assisted manufacturing), etc.--into a cost-efficient, optimized production process yielding the greatest flexibility in making various parts. A typical curriculum to teach FMS…

Information-Processing Correlates of Computer-Assisted Word Learning by Mentally Retarded Students.

ERIC Educational Resources Information Center

Conners, Frances A.; Detterman, Douglas K.

1987-01-01

Nineteen moderately/severely retarded students (ages 9-22) completed ten 15-minute computer-assisted instruction sessions and seven basic cognitive tasks measuring simple learning, choice reaction time, relearning, probed recall, stimulus discrimination, tachictoscopic threshold, and recognition memory. Stimulus discrimination, probed recall, and…

Social Choice in a Computer-Assisted Simulation

ERIC Educational Resources Information Center

Thavikulwat, Precha

2009-01-01

Pursuing a line of inquiry suggested by Crookall, Martin, Saunders, and Coote, the author applied, within the framework of design science, an optimal-design approach to incorporate into a computer-assisted simulation two innovative social choice processes: the multiple period double auction and continuous voting. Expectations that the…

Pipe Drafting with CAD. Teacher Edition.

ERIC Educational Resources Information Center

Smithson, Buddy

This teacher's guide contains nine units of instruction for a course on computer-assisted pipe drafting. The course covers the following topics: introduction to pipe drafting with CAD (computer-assisted design); flow diagrams; pipe and pipe components; valves; piping plans and elevations; isometrics; equipment fabrication drawings; piping design…

COMPUTER-ASSISTED MOTION ANALYSIS OF SPERM FROM THE COMMON CARP

EPA Science Inventory

Computer-assisted semen analysis (CASA) technology was applied to the measurement of sperm motility parameters in the common carp Cyprinus carpio. Activated sperm were videotaped at 200 frames s-1 and analysed with the CellTrak/S CASA research system. The percentage of motile cel...

Review of the Program. Report No. R-60.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Computer-Assisted Instruction Lab.

The nine-year history of the Computer Assisted Instruction Laboratory, College of Education, Pennsylvania State University, is traced. Some 30 projects in curriculum development in teacher education, public school classes, and adult vocational education are described, along with several advances in computer-assisted instruction (CAI).…

Effect of ram semen extenders and supplements on computer assisted sperm analysis parameters

USDA-ARS?s Scientific Manuscript database

A study evaluated the effects of ram semen extender and extender supplementation on computer assisted sperm analysis (CASA) parameters positively correlated with progressive motility. Semen collected from 5 rams was distributed across treatment combinations consisting of either TRIS citrate (T) or ...

A Multidisciplinary Model for Development of Intelligent Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Park, Ok-choon; Seidel, Robert J.

1989-01-01

Proposes a schematic multidisciplinary model to help developers of intelligent computer-assisted instruction (ICAI) identify the types of required expertise and integrate them into a system. Highlights include domain types and expertise; knowledge acquisition; task analysis; knowledge representation; student modeling; diagnosis of learning needs;…

Computer-assisted coding and clinical documentation: first things first.

PubMed

Tully, Melinda; Carmichael, Angela

2012-10-01

Computer-assisted coding tools have the potential to drive improvements in seven areas: Transparency of coding. Productivity (generally by 20 to 25 percent for inpatient claims). Accuracy (by improving specificity of documentation). Cost containment (by reducing overtime expenses, audit fees, and denials). Compliance. Efficiency. Consistency.

Cost-Effectiveness of Alternative Approaches to Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Levin, Henry M.; And Others

Operating on the premise that different approaches to computer-assisted instruction (CAI) may use different configurations of hardware and software, different curricula, and different organizational and personnel arrangements, this study explored the feasibility of collecting evaluations of CAI to evaluate the comparative cost-effectiveness of…

Medical imaging and registration in computer assisted surgery.

PubMed

Simon, D A; Lavallée, S

1998-09-01

Imaging, sensing, and computing technologies that are being introduced to aid in the planning and execution of surgical procedures are providing orthopaedic surgeons with a powerful new set of tools for improving clinical accuracy, reliability, and patient outcomes while reducing costs and operating times. Current computer assisted surgery systems typically include a measurement process for collecting patient specific medical data, a decision making process for generating a surgical plan, a registration process for aligning the surgical plan to the patient, and an action process for accurately achieving the goals specified in the plan. Some of the key concepts in computer assisted surgery applied to orthopaedics with a focus on the basic framework and underlying technologies is outlined. In addition, technical challenges and future trends in the field are discussed.

Automated planning of computer assisted mosaic arthroplasty.

PubMed

Inoue, Jiro; Kunz, Manuela; Hurtig, Mark B; Waldman, Stephen D; Stewart, A James

2011-01-01

We describe and evaluate a computer algorithm that automatically develops a surgical plan for computer assisted mosaic arthroplasty, a technically demanding procedure in which a set of osteochondral plugs are transplanted from a non-load-bearing area of the joint to the site of a cartilage defect. We found that the algorithm produced plans that were at least as good as a human expert, had less variability, and took less time.

Investigating the Effectiveness of Computer-Assisted Language Learning (CALL) Using Google Documents in Enhancing Writing--A Study on Senior 1 Students in a Chinese Independent High School

ERIC Educational Resources Information Center

Ambrose, Regina Maria; Palpanathan, Shanthini

2017-01-01

Computer-assisted language learning (CALL) has evolved through various stages in both technology as well as the pedagogical use of technology (Warschauer & Healey, 1998). Studies show that the CALL trend has facilitated students in their English language writing with useful tools such as computer based activities and word processing. Students…

Computer-assisted instruction

NASA Technical Reports Server (NTRS)

Atkinson, R. C.

1974-01-01

The results are presented of a project of research and development on strategies for optimizing the instructional process, and dissemination of information about the applications of such research to the instructional medium of computer-assisted instruction. Accomplishments reported include construction of the author language INSTRUCT, construction of a practical CAI course in the area of computer science, and a number of investigations into the individualization of instruction, using the course as a vehicle.

Intelligent Computer Assisted Instruction (ICAI): Formative Evaluation of Two Systems

DTIC Science & Technology

1986-03-01

appreciation .’.,-* for the power of computer technology. Interpretati on Yale students are a strikingly high performing group by traditional academic ...COMPUTER ASSISTED INSTRUCTION April 1984 - August 1985 (ICAI): FORMATIVE EVALUATION OF TWO SYSTEMS 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(*) S...956881 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA & WORK UNIT NUMBERS Jet Propulsion Laboratory 2Q263743A794

Computer-Assisted Monitoring Of A Complex System

NASA Technical Reports Server (NTRS)

Beil, Bob J.; Mickelson, Eric M.; Sterritt, John M.; Costantino, Rob W.; Houvener, Bob C.; Super, Mike A.

1995-01-01

Propulsion System Advisor (PSA) computer-based system assists engineers and technicians in analyzing masses of sensory data indicative of operating conditions of space shuttle propulsion system during pre-launch and launch activities. Designed solely for monitoring; does not perform any control functions. Although PSA developed for highly specialized application, serves as prototype of noncontrolling, computer-based subsystems for monitoring other complex systems like electric-power-distribution networks and factories.

Comparative Study in Laboratory Rats to Validate Sperm Quality Methods and Endpoints

NASA Technical Reports Server (NTRS)

Price, W. A.; Briggs, G. B.; Alexander, W. K.; Still, K. R.; Grasman, K. A.

2000-01-01

Abstract The Naval Health Research Center, Detachment (Toxicology) performs toxicity studies in laboratory animals to characterize the risk of exposure to chemicals of Navy interest. Research was conducted at the Toxicology Detachment at WPAFB, OH in collaboration with Wright State University, Department of Biological Sciences for the validation of new bioassay methods for evaluating reproductive toxicity. The Hamilton Thorne sperm analyzer was used to evaluate sperm damage produced by exposure to a known testicular toxic agent, methoxyacetic acid and by inhalation exposure to JP-8 and JP-5 in laboratory rats. Sperm quality parameters were evaluated (sperm concentration, motility, and morphology) to provide evidence of sperm damage. The Hamilton Thorne sperm analyzer utilizes a DNA specific fluorescent stain (similar to flow cytometry) and digitized optical computer analysis to detect sperm cell damage. The computer assisted sperm analysis (CASA) is a more rapid, robust, predictive and sensitive method for characterizing reproductive toxicity. The results presented in this poster report validation information showing exposure to methoxyacetic acid causes reproductive toxicity and inhalation exposure to JP-8 and JP-5 had no significant effects. The CASA method detects early changes that result in reproductive deficits and these data will be used in a continuing program to characterize the toxicity of chemicals, and combinations of chemicals, of military interest to formulate permissible exposure limits.

A ROC-based feature selection method for computer-aided detection and diagnosis

NASA Astrophysics Data System (ADS)

Wang, Songyuan; Zhang, Guopeng; Liao, Qimei; Zhang, Junying; Jiao, Chun; Lu, Hongbing

2014-03-01

Image-based computer-aided detection and diagnosis (CAD) has been a very active research topic aiming to assist physicians to detect lesions and distinguish them from benign to malignant. However, the datasets fed into a classifier usually suffer from small number of samples, as well as significantly less samples available in one class (have a disease) than the other, resulting in the classifier's suboptimal performance. How to identifying the most characterizing features of the observed data for lesion detection is critical to improve the sensitivity and minimize false positives of a CAD system. In this study, we propose a novel feature selection method mR-FAST that combines the minimal-redundancymaximal relevance (mRMR) framework with a selection metric FAST (feature assessment by sliding thresholds) based on the area under a ROC curve (AUC) generated on optimal simple linear discriminants. With three feature datasets extracted from CAD systems for colon polyps and bladder cancer, we show that the space of candidate features selected by mR-FAST is more characterizing for lesion detection with higher AUC, enabling to find a compact subset of superior features at low cost.

Development of an assisting detection system for early infarct diagnosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sim, K. S.; Nia, M. E.; Ee, C. S.

2015-04-24

In this paper, a detection assisting system for early infarct detection is developed. This new developed method is used to assist the medical practitioners to diagnose infarct from computed tomography images of brain. Using this assisting system, the infarct could be diagnosed at earlier stages. The non-contrast computed tomography (NCCT) brain images are the data set used for this system. Detection module extracts the pixel data from NCCT brain images, and produces the colourized version of images. The proposed method showed great potential in detecting infarct, and helps medical practitioners to make earlier and better diagnoses.

Application of Computer-Assisted Design and Manufacturing-Fabricated Artificial Bone in the Reconstruction of Craniofacial Bone Defects.

PubMed

Liang, Weiqiang; Yao, Yuanyuan; Huang, Zixian; Chen, Yuhong; Ji, Chenyang; Zhang, Jinming

2016-07-01

The purpose of this study was to evaluate the clinical application of individual craniofacial bone fabrications using computer-assisted design (CAD)-computer-assisted manufacturing technology for the reconstruction of craniofacial bone defects. A total of 8 patients diagnosed with craniofacial bone defects were enrolled in this study between May 2007 and August 2010. After computed tomography scans were obtained, the patients were fitted with artificial bone that was created using CAD software, rapid prototyping technology, and epoxy-methyl acrylate resin and hydroxyapatite materials. The fabrication was fixed to the defect area with titanium screws, and soft tissue defects were repaired if necessary. The fabrications were precisely fixed to the defect areas, and all wounds healed well without any serious complications except for 1 case with intraoral incision dehiscence, which required further treatment. Postoperative curative effects were retrospectively observed after 6 to 48 months, acceptable anatomic and cosmetic outcomes were obtained, and no rejections or other complications occurred. The use of CAD-computer-assisted manufacturing technology-assisted epoxy-methyl acrylate resin and hydroxyapatite composite artificial bone to treat patients with craniofacial bone defects could enable the precise reconstruction of these defects and obtain good anatomic and cosmetic outcomes. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Computer-assisted hip and knee arthroplasty. Navigation and active robotic systems: an evidence-based analysis.

PubMed

2004-01-01

The Medical Advisory Secretariat undertook a review of the evidence on the effectiveness and cost-effectiveness of computer assisted hip and knee arthroplasty. The two computer assisted arthroplasty systems that are the topics of this review are (1) navigation and (2) robotic-assisted hip and knee arthroplasty. Computer-assisted arthroplasty consists of navigation and robotic systems. Surgical navigation is a visualization system that provides positional information about surgical tools or implants relative to a target bone on a computer display. Most of the navigation-assisted arthroplasty devices that are the subject of this review are licensed by Health Canada. Robotic systems are active robots that mill bone according to information from a computer-assisted navigation system. The robotic-assisted arthroplasty devices that are the subject of this review are not currently licensed by Health Canada. The Cochrane and International Network of Agencies for Health Technology Assessment databases did not identify any health technology assessments on navigation or robotic-assisted hip or knee arthroplasty. The MEDLINE and EMBASE databases were searched for articles published between January 1, 1996 and November 30, 2003. This search produced 367 studies, of which 9 met the inclusion criteria. NAVIGATION-ASSISTED ARTHROPLASTY: Five studies were identified that examined navigation-assisted arthroplasty.A Level 1 evidence study from Germany found a statistically significant difference in alignment and angular deviation between navigation-assisted and free-hand total knee arthroplasty in favour of navigation-assisted surgery. However, the endpoints in this study were short-term. To date, the long-term effects (need for revision, implant longevity, pain, functional performance) are unknown.(1)A Level 2 evidence short-term study found that navigation-assisted total knee arthroplasty was significantly better than a non-navigated procedure for one of five postoperative measured angles.(2)A Level 2 evidence short-term study found no statistically significant difference in the variation of the abduction angle between navigation-assisted and conventional total hip arthroplasty.(3)Level 3 evidence observational studies of navigation-assisted total knee arthroplasty and unicompartmental knee arthroplasty have been conducted. Two studies reported that "the follow-up of the navigated prostheses is currently too short to know if clinical outcome or survival rates are improved. Longer follow-up is required to determine the respective advantages and disadvantages of both techniques."(4;5) ROBOTIC-ASSISTED ARTHROPLASTY: Four studies were identified that examined robotic-assisted arthroplasty.A Level 1 evidence study revealed that there was no statistically significant difference between functional hip scores at 24 months post implantation between patients who underwent robotic-assisted primary hip arthroplasty and those that were treated with manual implantation.(6)Robotic-assisted arthroplasty had advantages in terms of preoperative planning and the accuracy of the intraoperative procedure.(6)Patients who underwent robotic-assisted hip arthroplasty had a higher dislocation rate and more revisions.(6)Robotic-assisted arthroplasty may prove effective with certain prostheses (e.g., anatomic) because their use may result in less muscle detachment.(6)An observational study (Level 3 evidence) found that the incidence of severe embolic events during hip relocation was lower with robotic arthroplasty than with manual surgery.(7)An observational study (Level 3 evidence) found that there was no significant difference in gait analyses of patients who underwent robotic-assisted total hip arthroplasty using robotic surgery compared to patients who were treated with conventional cementless total hip arthroplasty.(8)An observational study (Level 3 evidence) compared outcomes of total knee arthroplasty between patients undergoing robotic surgery and patients who were historical controls. Brief, qualitative results suggested that there was much broader variation of angles after manual total knee arthroplasty compared to the robotic technique and that there was no difference in knee functional scores or implant position at the 3 and 6 month follow-up.(9).

Computer-Assisted Hip and Knee Arthroplasty. Navigation and Active Robotic Systems

PubMed Central

2004-01-01

Executive Summary Objective The Medical Advisory Secretariat undertook a review of the evidence on the effectiveness and cost-effectiveness of computer assisted hip and knee arthroplasty. The two computer assisted arthroplasty systems that are the topics of this review are (1) navigation and (2) robotic-assisted hip and knee arthroplasty. The Technology Computer-assisted arthroplasty consists of navigation and robotic systems. Surgical navigation is a visualization system that provides positional information about surgical tools or implants relative to a target bone on a computer display. Most of the navigation-assisted arthroplasty devices that are the subject of this review are licensed by Health Canada. Robotic systems are active robots that mill bone according to information from a computer-assisted navigation system. The robotic-assisted arthroplasty devices that are the subject of this review are not currently licensed by Health Canada. Review Strategy The Cochrane and International Network of Agencies for Health Technology Assessment databases did not identify any health technology assessments on navigation or robotic-assisted hip or knee arthroplasty. The MEDLINE and EMBASE databases were searched for articles published between January 1, 1996 and November 30, 2003. This search produced 367 studies, of which 9 met the inclusion criteria. Summary of Findings Navigation-Assisted Arthroplasty Five studies were identified that examined navigation-assisted arthroplasty. A Level 1 evidence study from Germany found a statistically significant difference in alignment and angular deviation between navigation-assisted and free-hand total knee arthroplasty in favour of navigation-assisted surgery. However, the endpoints in this study were short-term. To date, the long-term effects (need for revision, implant longevity, pain, functional performance) are unknown.(1) A Level 2 evidence short-term study found that navigation-assisted total knee arthroplasty was significantly better than a non-navigated procedure for one of five postoperative measured angles.(2) A Level 2 evidence short-term study found no statistically significant difference in the variation of the abduction angle between navigation-assisted and conventional total hip arthroplasty.(3) Level 3 evidence observational studies of navigation-assisted total knee arthroplasty and unicompartmental knee arthroplasty have been conducted. Two studies reported that “the follow-up of the navigated prostheses is currently too short to know if clinical outcome or survival rates are improved. Longer follow-up is required to determine the respective advantages and disadvantages of both techniques.”(4;5) Robotic-Assisted Arthroplasty Four studies were identified that examined robotic-assisted arthroplasty. A Level 1 evidence study revealed that there was no statistically significant difference between functional hip scores at 24 months post implantation between patients who underwent robotic-assisted primary hip arthroplasty and those that were treated with manual implantation.(6) Robotic-assisted arthroplasty had advantages in terms of preoperative planning and the accuracy of the intraoperative procedure.(6) Patients who underwent robotic-assisted hip arthroplasty had a higher dislocation rate and more revisions.(6) Robotic-assisted arthroplasty may prove effective with certain prostheses (e.g., anatomic) because their use may result in less muscle detachment.(6) An observational study (Level 3 evidence) found that the incidence of severe embolic events during hip relocation was lower with robotic arthroplasty than with manual surgery.(7) An observational study (Level 3 evidence) found that there was no significant difference in gait analyses of patients who underwent robotic-assisted total hip arthroplasty using robotic surgery compared to patients who were treated with conventional cementless total hip arthroplasty.(8) An observational study (Level 3 evidence) compared outcomes of total knee arthroplasty between patients undergoing robotic surgery and patients who were historical controls. Brief, qualitative results suggested that there was much broader variation of angles after manual total knee arthroplasty compared to the robotic technique and that there was no difference in knee functional scores or implant position at the 3 and 6 month follow-up.(9) PMID:23074452

Comparison of computer-assisted instruction (CAI) versus traditional textbook methods for training in abdominal examination (Japanese experience).

PubMed

Qayumi, A K; Kurihara, Y; Imai, M; Pachev, G; Seo, H; Hoshino, Y; Cheifetz, R; Matsuura, K; Momoi, M; Saleem, M; Lara-Guerra, H; Miki, Y; Kariya, Y

2004-10-01

This study aimed to compare the effects of computer-assisted, text-based and computer-and-text learning conditions on the performances of 3 groups of medical students in the pre-clinical years of their programme, taking into account their academic achievement to date. A fourth group of students served as a control (no-study) group. Participants were recruited from the pre-clinical years of the training programmes in 2 medical schools in Japan, Jichi Medical School near Tokyo and Kochi Medical School near Osaka. Participants were randomly assigned to 4 learning conditions and tested before and after the study on their knowledge of and skill in performing an abdominal examination, in a multiple-choice test and an objective structured clinical examination (OSCE), respectively. Information about performance in the programme was collected from school records and students were classified as average, good or excellent. Student and faculty evaluations of their experience in the study were explored by means of a short evaluation survey. Compared to the control group, all 3 study groups exhibited significant gains in performance on knowledge and performance measures. For the knowledge measure, the gains of the computer-assisted and computer-assisted plus text-based learning groups were significantly greater than the gains of the text-based learning group. The performances of the 3 groups did not differ on the OSCE measure. Analyses of gains by performance level revealed that high achieving students' learning was independent of study method. Lower achieving students performed better after using computer-based learning methods. The results suggest that computer-assisted learning methods will be of greater help to students who do not find the traditional methods effective. Explorations of the factors behind this are a matter for future research.

A novel mechatronic tool for computer-assisted arthroscopy.

PubMed

Dario, P; Carrozza, M C; Marcacci, M; D'Attanasio, S; Magnami, B; Tonet, O; Megali, G

2000-03-01

This paper describes a novel mechatronic tool for arthroscopy, which is at the same time a smart tool for traditional arthroscopy and the main component of a system for computer-assisted arthroscopy. The mechatronic arthroscope has a cable-actuated servomotor-driven multi-joint mechanical structure, is equipped with a position sensor measuring the orientation of the tip and with a force sensor detecting possible contact with delicate tissues in the knee, and incorporates an embedded microcontroller for sensor signal processing, motor driving and interfacing with the surgeon and/or the system control unit. When used manually, the mechatronic arthroscope enhances the surgeon's capabilities by enabling him/her to easily control tip motion and to prevent undesired contacts. When the tool is integrated in a complete system for computer-assisted arthroscopy, the trajectory of the arthroscope is reconstructed in real time by an optical tracking system using infrared emitters located in the handle, providing advantages in terms of improved intervention accuracy. The computer-assisted arthroscopy system comprises an image processing module for segmentation and three-dimensional reconstruction of preoperative computer tomography or magnetic resonance images, a registration module for measuring the position of the knee joint, tracking the trajectory of the operating tools, and matching preoperative and intra-operative images, and a human-machine interface that displays the enhanced reality scenario and data from the mechatronic arthroscope in a friendly and intuitive manner. By integrating preoperative and intra-operative images and information provided by the mechatronic arthroscope, the system allows virtual navigation in the knee joint during the planning phase and computer guidance by augmented reality during the intervention. This paper describes in detail the characteristics of the mechatronic arthroscope and of the system for computer-assisted arthroscopy and discusses experimental results obtained with a preliminary version of the tool and of the system.

Educational Technology: Best Practices from America's Schools.

ERIC Educational Resources Information Center

Bozeman, William C.; Baumbach, Donna J.

This book begins with an overview of computer technology concepts, including computer system configurations, computer communications, and software. Instructional computer applications are then discussed; topics include computer-assisted instruction, computer-managed instruction, computer-enhanced instruction, LOGO, authoring programs, presentation…

Computer-Assisted Instruction in Medicine: A German View.

ERIC Educational Resources Information Center

Voss, Gunnar; And Others

The following seven American programs of Computer Assisted Instruction in Medicine are among 20 implemented at the University of Bonn: OPHTHA and FUNDUS (programs of the tutorial mode), CARDI (presents information via three media on the clinical alterations of Mitral and Aortic Stenosis as well as Mitral and Aortal Incompetence), CARDIOPULMONARY…

Scaffolding and Integrated Assessment in Computer Assisted Learning (CAL) for Children with Learning Disabilities

ERIC Educational Resources Information Center

Beale, Ivan L.

2005-01-01

Computer assisted learning (CAL) can involve a computerised intelligent learning environment, defined as an environment capable of automatically, dynamically and continuously adapting to the learning context. One aspect of this adaptive capability involves automatic adjustment of instructional procedures in response to each learner's performance,…

Correcting Spellings in Second Language Learners' Computer-Assisted Collaborative Writing

ERIC Educational Resources Information Center

Musk, Nigel

2016-01-01

The present study uses multimodal conversation analysis to examine how pupils studying English as a foreign language make spelling corrections in real time while doing collaborative computer-assisted project work. Unlike most previous related investigations, this study focuses on the "process" rather than evaluating the final…

A Method for Selection of Appropriate Assistive Technology for Computer Access

ERIC Educational Resources Information Center

Jenko, Mojca

2010-01-01

Assistive technologies (ATs) for computer access enable people with disabilities to be included in the information society. Current methods for assessment and selection of the most appropriate AT for each individual are nonstandardized, lengthy, subjective, and require substantial clinical experience of a multidisciplinary team. This manuscript…

PLATO Based Computer Assisted Instruction: An Exploration.

ERIC Educational Resources Information Center

Wise, Richard L.

This study focuses on student response to computer-assisted instruction (CAI) after it was introduced into a college level physical geography course, "Introduction to Weather and Climate." PLATO, a University of Illinois mainframe network developed in the 1960s, was selected for its user friendliness, its large supply of courseware, its…

A College-Level, Computer-Assisted Course in Nutrition.

ERIC Educational Resources Information Center

Carew, Lyndon B.; And Others

1984-01-01

Describes a computer-assisted instructional (CAI) program to accompany a 15-week, college-level, introductory lecture course on the scientific principles of mammalian nutrition. The nature of the program is discussed, and examples of how it operates are provided. Comments on the evaluation of the program are also provided. (JN)

Assisting Adult Higher Education via Personal Computer: Technology and Distance Education.

ERIC Educational Resources Information Center

Spradley, Evelyn

1993-01-01

Thomas Edison State College (New Jersey) has developed a computer-assisted distance learning system to make undergraduate study more accessible, efficient, and effective for nontraditional students. The three main components: an infrastructure to provide varied technical services; an independent study course system; and diagnostic, online pretests…

Conversation Analysis in Computer-Assisted Language Learning

ERIC Educational Resources Information Center

González-Lloret, Marta

2015-01-01

The use of Conversation Analysis (CA) in the study of technology-mediated interactions is a recent methodological addition to qualitative research in the field of Computer-assisted Language Learning (CALL). The expansion of CA in Second Language Acquisition research, coupled with the need for qualitative techniques to explore how people interact…

Improving the Perceptual Performance of Learning Disabled Second Graders through Computer Assisted Instruction.

ERIC Educational Resources Information Center

Burke, James P.

The practicum designed a perceptual activities program for learning disabled second graders using computer-assisted instruction. The program develops skills involving visual motor coordination, figure-ground differentiation, form constancy, position in space, and spatial relationships. Five behavioral objectives for each developmental area were…

MONTHLY VARIATION IN SPERM MOTILITY IN COMMON CARP ASSESSED USING COMPUTER-ASSISTED SPERM ANALYSIS (CASA)

EPA Science Inventory

Sperm motility variables from the milt of the common carp Cyprinus carpio were assessed using a computer-assisted sperm analysis (CASA) system across several months (March-August 1992) known to encompass the natural spawning period. Two-year-old pond-raised males obtained each mo...

Computer Assisted Testing at the Education Resource Center.

ERIC Educational Resources Information Center

Uffelman, Robert L.

The development of the Computer Assisted Testing (CAT) System at the University of Delaware is described. The introduction presents the background leading up to interactive terminal testing in 1973. Documentation for the system includes CAT System programs, format of questions for constructing test item pools, format for entering class lists,…

Building Library Skills: Computer-Assisted Instruction for Undergraduates.

ERIC Educational Resources Information Center

Dixon, Lana; And Others

1995-01-01

Discusses the development and implementation of computer-assisted instruction in undergraduate English classes at the University of Tennessee, Knoxville. Describes three HyperCard modules that help students learn to find periodical articles, use the library's online catalog, and search MLA on CD-ROM. Also presents reactions from students, English…

Computer-Assisted Analysis of Qualitative Gerontological Research.

ERIC Educational Resources Information Center

Hiemstra, Roger; And Others

1987-01-01

Asserts that qualitative research has great potential for use in gerontological research. Describes QUALOG, a computer-assisted, qualitative data analysis scheme using logic programming developed at Syracuse University. Reviews development of QUALOG and discusses how QUALOG was used to analyze data from a qualitative study of older adult learners.…

Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

75 FR 16171 - Privacy Act of 1974; Notice of Modification of Existing Computer Matching Program Between the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

... program for the purpose of income verifications and computer matching. DATES: Effective Date: The... additional verification to identify inappropriate (excess or insufficient) rental assistance, and perhaps... Act, the Native American Housing Assistance and Self-Determination Act of 1996, and the Quality...

A Longitudinal Evaluation of Computer-Assisted Instruction on Contraception for College Students.

ERIC Educational Resources Information Center

Reis, Janet; Tymchyshyn, Patricia

1992-01-01

Assessed changes in contraceptive knowledge of 58 white female undergraduate students following computer-assisted instruction program on contraception. At six-month follow-up, students evidenced knowledge gains on duration of pill use, rationale for triphasics and biphasics, appropriate contingencies for missing two days of pill, danger signs…

Applications of Parsing Theory to Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Markosian, Lawrence Z.; Ager, Tryg A.

1983-01-01

Applications of an LR-1 parsing algorithm to intelligent programs for computer assisted instruction in symbolic logic and foreign languages are discussed. The system has been adequately used for diverse instructional applications, including analysis of student input, generation of pattern drills, and modeling the student's understanding of the…

Optimizing Computer Assisted Instruction By Applying Principles of Learning Theory.

ERIC Educational Resources Information Center

Edwards, Thomas O.

The development of learning theory and its application to computer-assisted instruction (CAI) are described. Among the early theoretical constructs thought to be important are E. L. Thorndike's concept of learning connectisms, Neal Miller's theory of motivation, and B. F. Skinner's theory of operant conditioning. Early devices incorporating those…

Working Together: Computers and People with Sensory Impairments.

ERIC Educational Resources Information Center

Washington Univ., Seattle.

This brief paper considers ways in which people with sensory impairments can benefit from the assistive technology available with computers. Assistive technology practitioners are urged not to focus on the disability, but on the individual's abilities and the tasks to be performed. Explanations of the major sensory disability areas precedes…

75 FR 26792 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance: Auburn...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... Regarding Eligibility To Apply for Worker Adjustment Assistance: Auburn Hills, MI Electronic Data Systems, a... Suppliers, Affiliated Computer Services, Inc., Apex Systems, Inc., ASA Solutions, Inc., Avaya, Inc., Bender... Systems, Educorp Training and Consulting, Inc., EMC Corp., Empirix, Inc., Fujitsu Computer Systems Corp...

A Survey of Students Participating in a Computer-Assisted Education Programme

ERIC Educational Resources Information Center

Yel, Elif Binboga; Korhan, Orhan

2015-01-01

This paper mainly examines anthropometric data, data regarding the habits, experiences, and attitudes of the students about their tablet/laptop/desktop computer use, in addition to self-reported musculoskeletal discomfort levels and frequencies of students participating in a tablet-assisted interactive education programme. A two-part questionnaire…

Computer-Assisted Law Instruction: Clinical Education's Bionic Sibling

ERIC Educational Resources Information Center

Henn, Harry G.; Platt, Robert C.

1977-01-01

Computer-assisted instruction (CAI), like clinical education, has considerable potential for legal training. As an initial Cornell Law School experiment, a lesson in applying different corporate statutory dividend formulations, with a cross-section of balance sheets and other financial data, was used to supplement regular class assignments.…

Tutoring with Alphie: Evaluation Report and Executive Summary

ERIC Educational Resources Information Center

Biggart, Andy; O'Hare, Liam; Miller, Sarah

2015-01-01

Tutoring with Alphie is a computer-assisted programme that aims to improve the literacy skills of struggling readers. The programme combines elements of collaborative (or 'cooperative') learning, computer-assisted instruction and small group support. Participating pupils are grouped in pairs and follow a series of activities that seek to improve…

Computer Assisted Instruction for the Mentally Retarded.

ERIC Educational Resources Information Center

Providence Coll., RI.

Computer Assisted Instruction (CAI) for the mentally retarded is described; the advantages of CAI (which generally follows the pattern of programed instruction) are listed; and the roles of the teacher and the student are summarized. The coursewriter is explained, and its use as an experimental tool discussed. Guidelines are given covering…

Computer-Assisted Instruction Guide.

ERIC Educational Resources Information Center

Entelek, Inc., Newburyport, MA.

Provided is a compilation of abstracts of currently available computer-assisted instructional (CAI) programs. The guide contains the specifications of all operational CAI programs that have come under the surveillance of ENTELEK's CAI Information Exchange since its establishment in 1965. A total of 226 CAI programs by 160 authors at 38 CAI centers…

Pedagogy and Related Criteria: The Selection of Software for Computer Assisted Language Learning

ERIC Educational Resources Information Center

Samuels, Jeffrey D.

2013-01-01

Computer-Assisted Language Learning (CALL) is an established field of academic inquiry with distinct applications for second language teaching and learning. Many CALL professionals direct language labs or language resource centers (LRCs) in which CALL software applications and generic software applications support language learning programs and…

Computer-Assisted Dieting: Effects of a Randomized Nutrition Intervention

ERIC Educational Resources Information Center

Schroder, Kerstin E. E.

2011-01-01

Objectives: To compare the effects of a computer-assisted dieting intervention (CAD) with and without self-management training on dieting among 55 overweight and obese adults. Methods: Random assignment to a single-session nutrition intervention (CAD-only) or a combined CAD plus self-management group intervention (CADG). Dependent variables were…

OBJECTIVE EVALUATION OF HYPERACTIVATED MOTILITY IN RAT SPERMATOZA USING COMPUTER-ASSISTED SPERM ANALYSIS (CASA)

EPA Science Inventory

Objective evaluation of hyperactivated motility in rat spermatozoa using computer-assisted sperm analysis.

Cancel AM, Lobdell D, Mendola P, Perreault SD.

Toxicology Program, University of North Carolina, Chapel Hill, NC 27599, USA.

The aim of this study was t...

Computer-Assisted Instruction to Avert Teen Pregnancy.

ERIC Educational Resources Information Center

Starn, Jane Ryburn; Paperny, David M.

Teenage pregnancy has become a major public health problem in the United States. A study was conducted to assess an intervention based upon computer-assisted instruction (CAI) to avert teenage pregnancy. Social learning and decision theory were applied to mediate the adolescent environment through CAI so that adolescent development would be…

Engineering Students' Use of Computer Assisted Learning (CAL)

ERIC Educational Resources Information Center

Huczynski, Andrzej; Johnston, Scott Paul

2005-01-01

This study examines the use of Computer Assisted Learning (CAL) by undergraduate engineering students studying a business and management course. Discussing both the relationship between management and engineering and CAL applied to engineering education, this study is based on a survey of 82 undergraduates and adopts a quantitative research…

Computer Assisted Teaching Comparisons with Handicapped. Final Report.

ERIC Educational Resources Information Center

Main, JoDell K.

A project was conducted to see if computer-assisted instruction could be used successfully with the low-level, non-reading adult. The experimental classroom group consisted of mentally handicapped and other educationally handicapped adults in adult basic education (ABE) programs. (Long-range implementation is aimed at ABE students who have a…

Teaching Pronunciation with Computer Assisted Pronunciation Instruction in a Technological University

ERIC Educational Resources Information Center

Liu, Sze-Chu; Hung, Po-Yi

2016-01-01

The purpose of this study is to evaluate the effectiveness of computer assisted pronunciation instruction in English pronunciation for students in vocational colleges and universities in Taiwan. The participants were fifty-one first-year undergraduate students from a technological university located in central Taiwan. The participants received an…

Computer-Assisted Instruction: A Case Study of Two Charter Schools

ERIC Educational Resources Information Center

Keengwe, Jared; Hussein, Farhan

2013-01-01

The purpose of this study was to examine the relationship in achievement gap between English language learners (ELLs) utilizing computer-assisted instruction (CAI) in the classroom, and ELLs relying solely on traditional classroom instruction. The study findings showed that students using CAI to supplement traditional lectures performed better…

Educational Research and Theory Perspectives on Intelligent Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Tennyson, Robert D.; Christensen, Dean L.

This paper defines the next generation of intelligent computer-assisted instructional systems (ICAI) by depicting the elaborations and extensions offered by educational research and theory perspectives to enhance the ICAI environment. The first section describes conventional ICAI systems, which use expert systems methods and have three modules: a…

Computer Assisted Instruction in Economics: An Approach for Illustrating General Equilibrium Concepts.

ERIC Educational Resources Information Center

Gillespie, Robert W.

A market exchange simulation utilizing the PLATO computer-assisted instructional system at the University of Illinois has been designed to teach students the principles of a general equilibrium system. It serves a laboratory function which supplements traditional instruction by stimulating students' interests and providing them with illustrations…

Collaboration and Computer-Assisted Acquisition of a Second Language.

ERIC Educational Resources Information Center

Renie, Delphine; Chanier, Thierry

1995-01-01

Discusses how collaborative learning (CL) can be used in a computer-assisted learning (CAL) environment for language learning, reviewing research in the fields of applied linguistics, educational psychology, and artificial intelligence. An application of CL and CAL in the learning of French as a Second Language, focusing on interrogative…

Computer-Assisted Language Learning Authoring Issues

ERIC Educational Resources Information Center

Otto, Sue E. K.; Pusack, James P.

2009-01-01

Computer-assisted language learning (CALL) authoring refers to a wide variety of creative development activities using software tools that run the gamut from simple templates (easy-to-use predefined forms into which content is typed) to complex authoring environments (flexible but harder-to-use systems, requiring advanced skills and a great deal…

Two Computer-Assisted Experiments

ERIC Educational Resources Information Center

Kraftmakher, Yaakov

2013-01-01

Two computer-assisted experiments are described: (i) determination of the speed of ultrasound waves in water and (ii) measurement of the thermal expansion of an aluminum-based alloy. A new data-acquisition system developed by PASCO scientific is used. In both experiments, the "Keep" mode of recording data is employed: the data are…

The Accuracy of Computer-Assisted Feedback and Students' Responses to It

ERIC Educational Resources Information Center

Lavolette, Elizabeth; Polio, Charlene; Kahng, Jimin

2015-01-01

Various researchers in second language acquisition have argued for the effectiveness of immediate rather than delayed feedback. In writing, truly immediate feedback is impractical, but computer-assisted feedback provides a quick way of providing feedback that also reduces the teacher's workload. We explored the accuracy of feedback from…

Computer-assisted design in perceptual-motor skills research

NASA Technical Reports Server (NTRS)

Rogers, C. A., Jr.

1974-01-01

A categorization was made of independent variables previously found to be potent in simple perceptual-motor tasks. A computer was then used to generate hypothetical factorial designs. These were evaluated in terms of literature trends and pragmatic criteria. Potential side-effects of machine-assisted research strategy were discussed.

A Study of Multimedia Application-Based Vocabulary Acquisition

ERIC Educational Resources Information Center

Shao, Jing

2012-01-01

The development of computer-assisted language learning (CALL) has created the opportunity for exploring the effects of the multimedia application on foreign language vocabulary acquisition in recent years. This study provides an overview the computer-assisted language learning (CALL) and detailed a developing result of CALL--multimedia. With the…

Recent advances at NASA in calculating the electronic spectra of diatomic molecules

NASA Technical Reports Server (NTRS)

Whiting, Ellis E.; Paterson, John A.

1988-01-01

Advanced entry vehicles, such as the proposed Aero-assisted Orbital Transfer Vehicle, provide new and challenging problems for spectroscopy. Large portions of the flow field about such vehicles will be characterized by chemical and thermal nonequilibrium. Only by considering the actual overlap of the atomic and rotational lines emitted by the species present can the impact of radiative transport within the flow field be assessed correctly. To help make such an assessment, a new computer program is described that can generate high-resolution, line-by-line spectra for any spin-allowed transitions in diatomic molecules. The program includes the matrix elements for the rotational energy and distortion to the fourth order; the spin-orbit, spin-spin, and spin-rotation interactions to first order; and the lambda splitting by a perturbation calculation. An overview of the Computational Chemistry Branch at Ames Research Center is also presented.

Laser-assisted heating of a plasmonic nanofluid in a microchannel

NASA Astrophysics Data System (ADS)

Walsh, Timothy

The work presented in this study analyses the theoretical modeling and experimentation of laser-assisted heating of plasmonic nanofluids (PNFs) in a microchannel for accurate, efficient, and ultra-fast heating of a microdroplet. Suspended plasmonic nanoparticles exhibit strong light absorption and scattering upon the excitation of localized surface plasmons (LSPs), resulting in intense and rapid photothermal heating. Several multi-stepped computational models were utilized to theoretically characterize and verify the laser-assisted heating behavior of gold nanoshells (GNS) and gold nanorod (GNR) plasmonic nanofluid droplets in a microchannel. From the experimental investigation, a full range of controllable steady-state temperatures, room temperature to 100°C, are confirmed to be achievable for the 780-nm-tuned plasmonic nanofluid. Droplet fluid heating is verified to occur as a result of LSP excitation, in time scales of milliseconds, and to be repeatable over many cycles. Additionally, the significance and effects of parameters in the process, such as nanoparticle structure, volumetric concentration, microchannel depth, and laser power density are established. The obtained results in this research may be integrated into other existing microfluidic technologies and biological techniques, such as the polymerase chain reaction, where accurate and ultra-fast heating of microdroplets in a microchannel can greatly improve efficiency.

Mechanical and electrical characterization of semiconducting ZnO nanorings by direct nano-manipulation

NASA Astrophysics Data System (ADS)

Mai, Wenjie; Zhang, Long; Gu, Yudong; Huang, Shiqing; Zhang, Zongfu; Lao, Changshi; Yang, Peihua; Qiang, Pengfei; Chen, Zhongwei

2012-08-01

With assistance from a nano-manipulator system inside a scanning electron microscope chamber, mechanical and electrical properties of ZnO nanorings were investigated. The change of a fractured nanoring to nearly straight nanobelts was strong evidence to support the previously proposed electrostatic-force-induced self-coiling model, and our computational simulation results indicated the fracture force was 25-30 μN. The contact between a tungsten tip of the manipulator and a ZnO nanoring was confirmed as the Schottky type; therefore, the change of I-V curves of the nanoring under compression was attributed to the Schottky barrier height changes.

Hypercubane: DFT-based prediction of an Oh-symmetric double-shell hydrocarbon

NASA Astrophysics Data System (ADS)

Pichierri, Fabio

2014-09-01

Using density functional theory we design a molecular analog of the four-dimensional hypercube or tesseract which we called hypercubane. The title hydrocarbon (C40H24) is Oh-symmetric like cubane and is characterized by a double-shell architecture. The perfluorinated analog of hypercubane also is stable with a positive value of the electron affinity. Removal of the C8 core from hypercubane yields a hollowed Oh-symmetric hydrocarbon with enough room to host a single atom/ion guest. The resonances of the NMR-active 13C and 1H nuclei have been computed so as to assist the spectroscopic identification of the predicted molecules.

Accuracy of robot-assisted pedicle screw placement for adolescent idiopathic scoliosis in the pediatric population.

PubMed

Macke, Jeremy J; Woo, Raymund; Varich, Laura

2016-06-01

This is a retrospective review of pedicle screw placement in adolescent idiopathic scoliosis (AIS) patients under 18 years of age who underwent robot-assisted corrective surgery. Our primary objective was to characterize the accuracy of pedicle screw placement with evaluation by computed tomography (CT) after robot-assisted surgery in AIS patients. Screw malposition is the most frequent complication of pedicle screw placement and is more frequent in AIS. Given the potential for serious complications, the need for improved accuracy of screw placement has spurred multiple innovations including robot-assisted guidance devices. No studies to date have evaluated this robot-assisted technique using CT exclusively within the AIS population. Fifty patients were included in the study. All operative procedures were performed at a single institution by a single pediatric orthopedic surgeon. We evaluated the grade of screw breach, the direction of screw breach, and the positioning of the patient for preoperative scan (supine versus prone). Of 662 screws evaluated, 48 screws (7.2 %) demonstrated a breach of greater than 2 mm. With preoperative prone position CT scanning, only 2.4 % of screws were found to have this degree of breach. Medial malposition was found in 3 % of screws, a rate which decreased to 0 % with preoperative prone position scanning. Based on our results, we conclude that the proper use of image-guided robot-assisted surgery can improve the accuracy and safety of thoracic pedicle screw placement in patients with adolescent idiopathic scoliosis. This is the first study to evaluate the accuracy of pedicle screw placement using CT assessment in robot-assisted surgical correction of patients with AIS. In our study, the robot-assisted screw misplacement rate was lower than similarly constructed studies evaluating conventional (non-robot-assisted) procedures. If patients are preoperatively scanned in the prone position, the misplacement rate is further decreased.

Use of microcomputers for self-assessment and continuing education in anaesthesia.

PubMed Central

Schmulian, C; Kenny, G N; Campbell, D

1982-01-01

The suitability of computer-assisted self-assessment was evaluated as a means of quality assurance in anaesthesia. Altogether 202 anaesthetists participated in four trials of the method. Analyses of their performance in a self-assessment programme dealing with obstetric anaesthesia showed significant differences in the levels of knowledge of anaesthetists practising for different numbers of years. The acceptability of computer-assisted self-assessment ranged from 91% to 100% for the four trials. Similar programs have been shown to be of value in medical education and thus computer-assisted self-assessment appears to fulfil simultaneously the functions of self-assessment and continuing education. The criteria for a method of quality assurance are met. PMID:6800476

Computer-assisted enzyme immunoassays and simplified immunofluorescence assays: applications for the diagnostic laboratory and the veterinarian's office.

PubMed

Jacobson, R H; Downing, D R; Lynch, T J

1982-11-15

A computer-assisted enzyme-linked immunosorbent assay (ELISA) system, based on kinetics of the reaction between substrate and enzyme molecules, was developed for testing large numbers of sera in laboratory applications. Systematic and random errors associated with conventional ELISA technique were identified leading to results formulated on a statistically validated, objective, and standardized basis. In a parallel development, an inexpensive system for field and veterinary office applications contained many of the qualities of the computer-assisted ELISA. This system uses a fluorogenic indicator (rather than the enzyme-substrate interaction) in a rapid test (15 to 20 minutes' duration) which promises broad application in serodiagnosis.

Ambient Assisted Living spaces validation by services and devices simulation.

PubMed

Fernández-Llatas, Carlos; Mocholí, Juan Bautista; Sala, Pilar; Naranjo, Juan Carlos; Pileggi, Salvatore F; Guillén, Sergio; Traver, Vicente

2011-01-01

The design of Ambient Assisted Living (AAL) products is a very demanding challenge. AAL products creation is a complex iterative process which must accomplish exhaustive prerequisites about accessibility and usability. In this process the early detection of errors is crucial to create cost-effective systems. Computer-assisted tools can suppose a vital help to usability designers in order to avoid design errors. Specifically computer simulation of products in AAL environments can be used in all the design phases to support the validation. In this paper, a computer simulation tool for supporting usability designers in the creation of innovative AAL products is presented. This application will benefit their work saving time and improving the final system functionality.

Education review: a computer-assisted instructional tool to assist students in developing an epidemiological research proposal.

PubMed

Watzlaf, V J; Addeo, L; Nous, A

1995-11-01

The development of an epidemiological research proposal can be a difficult assignment for junior health information management students. The article demonstrates how a computer-assisted instructional (CAI) tool was developed to assist students in the development of an epidemiological research proposal. Surveys were conducted to determine where students were having the most problems, information about writing a research proposal was gathered and organized into an appropriate format, appropriate software (Hypercard) was chosen, the final CAI tool (the Research and Grant Writer) was developed, and positive feedback was obtained from junior health information management students using the CAI tool.

Feasibility and safety of augmented-reality glass for computed tomography-assisted percutaneous revascularization of coronary chronic total occlusion: A single center prospective pilot study.

PubMed

Opolski, Maksymilian P; Debski, Artur; Borucki, Bartosz A; Staruch, Adam D; Kepka, Cezary; Rokicki, Jakub K; Sieradzki, Bartosz; Witkowski, Adam

2017-11-01

Percutaneous coronary intervention (PCI) of chronic total occlusion (CTO) may be facilitated by projection of coronary computed tomography angiography (CTA) datasets in the catheterization laboratory. There is no data on the feasibility and safety outcomes of CTA-assisted CTO PCI using a wearable augmented-reality glass. A total of 15 patients scheduled for elective antegrade CTO intervention were prospectively enrolled and underwent preprocedural coronary CTA. Three-dimensional and curved multiplanar CT reconstructions were transmitted to a head-mounted hands-free computer worn by interventional cardiologists during CTO PCI to provide additional information on CTO tortuosity and calcification. The results of CTO PCI using a wearable computer were compared with a time-matched prospective angiographic registry of 59 patients undergoing antegrade CTO PCI without a wearable computer. Operators' satisfaction was assessed by a 5-point Likert scale. Mean age was 64 ± 8 years and the mean J-CTO score was 2.1 ± 0.9 in the CTA-assisted group. The voice-activated co-registration and review of CTA images in a wearable computer during CTO PCI were feasible and highly rated by PCI operators (4.7/5 points). There were no major adverse cardiovascular events. Compared with standard CTO PCI, CTA-assisted recanalization of CTO using a wearable computer showed more frequent selection of the first-choice stiff wire (0% vs 40%, p < 0.001) and lower contrast exposure (166 ± 52 vs 134 ± 43 ml, p = 0.03). Overall CTO success rates and safety outcomes remained similar between both groups. CTA-assisted CTO PCI using an augmented-reality glass is feasible and safe, and might reduce the resources required for the interventional treatment of CTO. Copyright © 2017 Society of Cardiovascular Computed Tomography. Published by Elsevier Inc. All rights reserved.

Computer-Assisted Instruction: Stanford's 1965-66 Arithmetic Program.

ERIC Educational Resources Information Center

Suppes, Patrick; And Others

A review of the possibilities and challenges of computer-assisted instruction (CAI), and a brief history of CAI projects at Stanford serve to give the reader the context of the particular program described and analyzed in this book. The 1965-66 arithmetic drill-and-practice program is described, summarizing the curriculum and project operation. An…

Effect of Computer-Assisted Instruction on Secondary School Students' Achievement in Ecological Concepts

ERIC Educational Resources Information Center

Nkemdilim, Egbunonu Roseline; Okeke, Sam O. C.

2014-01-01

This study investigated the effects of computer-assisted instruction (CAI) on students' achievement in ecological concepts. Quasi-experimental design, specifically the pre-test post test non-equivalent control group design was adopted. The sample consisted of sixty-six (66) senior secondary year two (SS II) biology students, drawn from two…

Elaborated Corrective Feedback and the Acquisition of Reasoning Skills: A Study of Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Collins, Maria; And Others

1987-01-01

Thirteen learning disabled and 15 remedial high school students were taught reasoning skills using computer-assisted instruction and were given basic or elaborated corrections. Criterion-referenced test scores were significantly higher for the elaborated-corrections treatment on the post- and maintenance tests and on a transfer test assessing…

A Computer Spreadsheet for Locating Assistive Devices.

ERIC Educational Resources Information Center

Palmer, Catherine V.; Garstecki, Dean C.

1988-01-01

The article presents a directory of assistive devices for persons with hearing impairments in a grid format by distributor and type of device (alerting devices, telephone, TV/radio/stereo, personal communication, group communication, and other). The product locator is also available in spreadsheet form for either the Macintosh or IBM-PC computers.…

Computer-Assisted Scheduling of Army Unit Training: An Application of Simulated Annealing.

ERIC Educational Resources Information Center

Hart, Roland J.; Goehring, Dwight J.

This report of an ongoing research project intended to provide computer assistance to Army units for the scheduling of training focuses on the feasibility of simulated annealing, a heuristic approach for solving scheduling problems. Following an executive summary and brief introduction, the document is divided into three sections. First, the Army…

Longitudinal Evaluation of the Computer Assisted Instruction, Title I Project, 1979-82.

ERIC Educational Resources Information Center

Lavin, Richard J.; Sanders, Jean E.

The Computer-Assisted Instruction (CAI) Project is an alternative, supplementary approach to providing reading, mathematics, and language arts instruction in schools in six northeastern Massachusetts communities. The CAI activities are provided as a supplement to instruction in Title I/Chapter I programs. Beginning in 1979, a 3-year research study…

A Computer-Assisted Nutrition Education Unit for Grades 4-6.

ERIC Educational Resources Information Center

Hills, Alvina M.

1983-01-01

A computer-assisted instructional unit (written for 32K Commodore PET microcomputer) was developed to identify four food groups outlined in Canada's Food Guide, place specific foods in correct groups, and identify food not belonging to the four groups. Animated color-coded keys are used to represent the food groups. (JN)

Attitudes of Jordanian Undergraduate Students towards Using Computer Assisted Language Learning (CALL)

ERIC Educational Resources Information Center

Saeed, Farah Jamal Abed Alrazeq; Al-Zayed, Norma Nawaf

2018-01-01

The study aimed at investigating the attitudes of Jordanian undergraduate students towards using computer assisted-language learning (CALL) and its effectiveness in the process of learning the English language. In order to fulfill the study's objective, the researchers used a questionnaire to collect data, followed-up with semi-structured…

Effects of Computer-Assisted Jigsaw II Cooperative Learning Strategy on Physics Achievement and Retention

ERIC Educational Resources Information Center

Gambari, Isiaka Amosa; Yusuf, Mudasiru Olalere

2016-01-01

This study investigated the effects of computer-assisted Jigsaw II cooperative strategy on physics achievement and retention. The study also determined how moderating variables of achievement levels as it affects students' performance in physics when Jigsaw II cooperative learning is used as an instructional strategy. Purposive sampling technique…

A Comparison of Computer-Assisted Instruction and Tutorials in Hematology and Oncology.

ERIC Educational Resources Information Center

Garrett, T. J.; And Others

1987-01-01

A study comparing the effectiveness of computer-assisted instruction (CAI) and small group instruction found no significant difference in medical student achievement in oncology but higher achievement through small-group instruction in hematology. Students did not view CAI as more effective, but saw it as a supplement to traditional methods. (MSE)

Effect of Network-Assisted Language Teaching Model on Undergraduate English Skills

ERIC Educational Resources Information Center

He, Chunyan

2013-01-01

With the coming of the information age, computer-based teaching model has had an important impact on English teaching. Since 2004, the trial instruction on Network-assisted Language Teaching (NALT) Model integrating the English instruction and computer technology has been launched at some universities in China, including China university of…

Using Computer-Assisted Instruction to Build Math Fact Fluency: An Implementation Guide

ERIC Educational Resources Information Center

Hawkins, Renee O.; Collins, Tai; Hernan, Colleen; Flowers, Emily

2017-01-01

Research findings support the use of computer-assisted instruction (CAI) as a curriculum supplement for improving math skills, including math fact fluency. There are a number of websites and mobile applications (i.e., apps) designed to build students' math fact fluency, but the options can become overwhelming. This article provides implementation…

Computer-Assisted Reporting in Classrooms: A Decade of Diffusion and a Comparison to Newsrooms.

ERIC Educational Resources Information Center

Davenport, Lucinda D.; Fico, Fred; DeFleur, Margaret H.

2002-01-01

Replicates and updates the only other research that examined the adoption of computer-assisted reporting instruction in journalism schools quantitatively. Compares the different computerized sources being used in newsrooms and classrooms, and elicits the reasons that these sources are being used in each environment. Concludes many programs are…

A PERT/CPM of the Computer Assisted Completion of The Ministry September Report. Research Report.

ERIC Educational Resources Information Center

Feeney, J. D.

Using two statistical analysis techniques (the Program Evaluation and Review Technique and the Critical Path Method), this study analyzed procedures for compiling the required yearly report of the Metropolitan Separate School Board (Catholic) of Toronto, Canada. The computer-assisted analysis organized the process of completing the report more…

Receptivity toward Assistive Computer Technology by Non-Users Who Are Blind/Visually Impaired

ERIC Educational Resources Information Center

Leff, Lisa

2012-01-01

The non-use of assistive computer technology by some people who are legallyblind/visually-impaired was investigated to determine the reasons for lack of interest (Chiang, Cole, Gupta, Kaiser, & Starren, 2006; Williamson, Wright, Schauder & Bow, 2001). Social and psychological factors implicated in non-interest were determined by profiling…

76 FR 56781 - Privacy Act of 1974; Notice of a Computer Matching Program Between the Department of Housing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

... require additional verification to identify inappropriate or inaccurate rental assistance, and may provide... Affordable Housing Act, the Native American Housing Assistance and Self-Determination Act of 1996, and the... matching activities. The computer matching program will also provide for the verification of social...

Computer-Assisted, Programmed Text, and Lecture Modes of Instruction in Three Medical Training Courses: Comparative Evaluation. Final Report.

ERIC Educational Resources Information Center

Deignan, Gerard M.; And Others

This report contains a comparative analysis of the differential effectiveness of computer-assisted instruction (CAI), programmed instructional text (PIT), and lecture methods of instruction in three medical courses--Medical Laboratory, Radiology, and Dental. The summative evaluation includes (1) multiple regression analyses conducted to predict…

Computer Assisted Vocational Math. Written for TRS-80, Model I, Level II, 16K.

ERIC Educational Resources Information Center

Daly, Judith; And Others

This computer-assisted curriculum is intended to be used to enhance a vocational mathematics/applied mathematics course. A total of 32 packets were produced to increase the basic mathematics skills of students in the following vocational programs: automotive trades, beauty culture, building trades, climate control, electrical trades,…

A Fundamental Methodology for Designing Management Information Systems for Schools.

ERIC Educational Resources Information Center

Visscher, Adrie J.

Computer-assisted school information systems (SISs) are developed and used worldwide; however, the literature on strategies for their design and development is lacking. This paper presents the features of a fundamental approach to systems design that proved to be successful when developing SCHOLIS, a computer-assisted SIS for Dutch secondary…

Promoting Creativity through Assessment: A Formative Computer-Assisted Assessment Tool for Teachers

ERIC Educational Resources Information Center

Cropley, David; Cropley, Arthur

2016-01-01

Computer-assisted assessment (CAA) is problematic when it comes to fostering creativity, because in educational thinking the essence of creativity is not finding the correct answer but generating novelty. The idea of "functional" creativity provides rubrics that can serve as the basis for forms of CAA leading to either formative or…

A Text-Computer Assisted Instruction Program as a Viable Alternative for Continuing Education in Laboratory Medicine.

ERIC Educational Resources Information Center

Bruce, A. Wayne

1986-01-01

Describes reasons for developing combined text and computer assisted instruction (CAI) teaching programs for delivery of continuing education to laboratory professionals, and mechanisms used for developing a CAI program on method evaluation in the clinical laboratory. Results of an evaluation of the software's cost effectiveness and instructional…

Effectiveness of Computer-Assisted STAD Cooperative Learning Strategy on Physics Problem Solving, Achievement and Retention

ERIC Educational Resources Information Center

Gambari, Amosa Isiaka; Yusuf, Mudasiru Olalere

2015-01-01

This study investigated the effectiveness of computer-assisted Students' Team Achievement Division (STAD) cooperative learning strategy on physics problem solving, students' achievement and retention. It also examined if the student performance would vary with gender. Purposive sampling technique was used to select two senior secondary schools…

Personality Characteristics and Performance on Computer Assisted Instruction and Programmed Text.

ERIC Educational Resources Information Center

Blitz, Allan N.; Smith, Timothy

An empirical study investigated whether personality characteristics have a bearing on an individual's success with particular modes of instruction, in this case, computer-assisted instruction (CAI) and the programed text (PT). The study was developed in an attempt to establish useful criteria on which to base a rationale for choosing suitable…

Environmental Factors Affecting Computer Assisted Language Learning Success: A Complex Dynamic Systems Conceptual Model

ERIC Educational Resources Information Center

Marek, Michael W.; Wu, Wen-Chi Vivian

2014-01-01

This conceptual, interdisciplinary inquiry explores Complex Dynamic Systems as the concept relates to the internal and external environmental factors affecting computer assisted language learning (CALL). Based on the results obtained by de Rosnay ["World Futures: The Journal of General Evolution", 67(4/5), 304-315 (2011)], who observed…

Evaluation of DILearn: An Interactive Computer-Assisted Learning Program for Drug Information.

ERIC Educational Resources Information Center

Tunget, Cynthia L.; And Others

1993-01-01

Use of an interactive computer-assisted learning program to teach basic skills in obtaining drug information was investigated with 26 doctoral pharmacy students and a control group of 25 students receiving lecture instruction. Findings indicated no significant differences in short-term retention of drug information between groups and that students…

Comparative Effects of Ability and Feedback Form in Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Clariana, Roy B.; Smith, Lana J.

A study involving 50 experimental and 99 control subjects (graduate education majors) was undertaken to assess the interchangeability of knowledge of correct response feedback (KRC) and answer until correct feedback (AUC) in computer-assisted instruction. P. L. Smith's model (1988) suggests that AUC in better for high-ability students. W. Dick and…

Deconstructing the Discourse of Opportunity: Computer-Assisted Credit Recovery in Alternative Education

ERIC Educational Resources Information Center

Miller, Elizabeth R.

2013-01-01

Alternative schools educate students who have previously been unsuccessful in the traditional school setting. Many alternative school students are behind on high school credits, and the schools provide options for credit recovery. Computer-assisted instruction is often used for this purpose. Using case study methodology and a critical theoretical…

Computer-Assisted Instruction to Teach DOS Commands: A Pilot Study.

ERIC Educational Resources Information Center

McWeeney, Mark G.

1992-01-01

Describes a computer-assisted instruction (CAI) program used to teach DOS commands. Pretest and posttest results for 65 graduate students using the program are reported, and it is concluded that the CAI program significantly aided the students. Sample screen displays for the program and several questions from the pre/posttest are included. (nine…

Technology for School-Based Assessment and Assessment for Learning: Development Principles from New Zealand

ERIC Educational Resources Information Center

Hattie, John A. C.; Brown, Gavin T. L.

2008-01-01

National assessment systems can be enhanced with effective school-based assessment (SBA) that allows teachers to focus on improvement decisions. Modern computer-assisted technology systems are often used to deploy SBA systems. Since 2000, New Zealand has researched, developed, and deployed a national, computer-assisted SBA system. Eight major…

English Language Teachers' Perceptions of Computer-Assisted Language Learning

ERIC Educational Resources Information Center

Feng, Yu Lin

2012-01-01

A growing number of studies have reported the potential use of computer-assisted language learning (CALL) and other types of technology for ESL and EFL students. So far, most studies on CALL have focused on CALL-classroom comparisons (Chenoweth & Murday, 2003; Chenoweth, Ushida, & Murday, 2007; Fitze, 2006; Neri, Mich, Gerosa, &…

Computer-Assisted Argument Mapping: A "Rationale" Approach

ERIC Educational Resources Information Center

Davies, W. Martin

2009-01-01

Computer-Assisted Argument Mapping (CAAM) is a new way of understanding arguments. While still embryonic in its development and application, CAAM is being used increasingly as a training and development tool in the professions and government. Inroads are also being made in its application within education. CAAM claims to be helpful in an…

Computer Assisted Mathematics Prescription Learning Pull-out Program in an Elementary School.

ERIC Educational Resources Information Center

Swarm, Christine C.

Summaries of recent research have found computer-assisted instruction to be a highly motivating method of instruction that fosters independent study and provides for the immediate feedback necessary for the encouragement of individualized learning. A nonexperimental study was conducted with fourth, fifth, and sixth grade students (n=88) in a…

CAD/CAM. High-Technology Training Module.

ERIC Educational Resources Information Center

Zuleger, Robert

This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

Computer-Assisted Bilingual/Bicultural Multiskills Project, 1987-1988. OREA Report.

ERIC Educational Resources Information Center

Berney, Tomi D.; Carey, Cecilia

The Computer-Assisted Bilingual/Bicultural Multiskills Project completed its first year of an extension grant. The program used computerized and non-computerized instruction to help 109 native speakers of Haitian Creole/French and Spanish, most of whom were recent immigrants, develop English-as-a-Second-Language (ESL) native language, and content…

Academic Achievement Enhanced by Personal Digital Assistant Use

ERIC Educational Resources Information Center

Bick, Alexander

2005-01-01

Research during the past decade suggests that integrating computing technology in general, and mobile computers in particular, into the educational environment has positive effects. This is the first long-term study of high school Personal Digital Assistant use. It involved three-parts, 146 students during four years. Part one found that PDA use…

A Guide to Courseware Authoring Options in ESL/FL Instruction.

ERIC Educational Resources Information Center

Hampson, S. L.

A guide to courseware authoring aids for computer-assisted language instruction (CALIS) gives suggestions for the selection and use of programing options and provides an annotated listing of those options. Introductory sections discuss the use of computer-assisted language teaching, the selection of quality courseware, the types of authoring aids…

Authoring of Adaptive Computer Assisted Assessment of Free-Text Answers

ERIC Educational Resources Information Center

Alfonseca, Enrique; Carro, Rosa M.; Freire, Manuel; Ortigosa, Alvaro; Perez, Diana; Rodriguez, Pilar

2005-01-01

Adaptation techniques can be applied not only to the multimedia contents or navigational possibilities of a course, but also to the assessment. In order to facilitate the authoring of adaptive free-text assessment and its integration within adaptive web-based courses, Adaptive Hypermedia techniques and Free-text Computer Assisted Assessment are…

Evaluation of Imagine Learning English, a Computer-Assisted Instruction of Language and Literacy for Kindergarten Students

ERIC Educational Resources Information Center

Longberg, Pauline Oliphant

2012-01-01

As computer assisted instruction (CAI) becomes increasingly sophisticated, its appeal as a viable method of literacy intervention with young children continues despite limited evidence of effectiveness. The present study sought to assess the impact of one such CAI program, "Imagine Learning English" (ILE), on both the receptive…

Experimentation with Computer-Assisted Instruction in Technical Education. Semi-Annual Progress Report.

ERIC Educational Resources Information Center

Mitzel, Harold E.; Brandon, George L.

A series of five reports is presented which describes the activities carried out by the Pennsylvania State University group engaged in research in computer-assisted instruction (CAI) in vocational-technical education. The reports cover the period January 1968-June 1968 and deal with: 1) prior knowledge and individualized instruction; 2) numerical…

Computer-Assisted Pronunciation Learning in a Collaborative Context: A Case Study in Taiwan

ERIC Educational Resources Information Center

Tsai, Pi-hua

2015-01-01

Computer-assisted pronunciation training (CAPT) software provides language learners with an individualized free environment where they can have access to unlimited input and repetitive practice pronunciation at their own pace. This study explores the impact of CAPT on 90 Taiwanese college students' pronunciation learning and examines if other…

Computer-Assisted Instruction and Continuing Motivation.

ERIC Educational Resources Information Center

Mosley, Mary Lou; And Others

Effects of two feedback conditions--comment and no comment--on the motivation of sixth grade students to continue with computer assisted instruction (CAI) were investigated, and results for boys and for girls were compared. Subjects were 62 students--29 boys and 33 girls--from a suburban elementary school who were randomly assigned to the comment…

Keewatin Region Educational Authority Pilot Adult Education Project: Computer-Assisted Learning. Final Report.

ERIC Educational Resources Information Center

Fahy, Patrick J.

This 2-year project attempted to improve local employment prospects of young adult Inuit in seven communities in the Keewatin Region in the Canadian Northwest Territories by providing them computer-assisted instruction (CAI) in adult basic education and high school equivalency upgrading programs; business, financial, and telecommunications…

A Computer Assisted Language Analysis System.

ERIC Educational Resources Information Center

Rush, J. E.; And Others

A description is presented of a computer-assisted language analysis system (CALAS) which can serve as a method for isolating and displaying language utterances found in conversation. The purpose of CALAS is stated as being to deal with the question of whether it is possible to detect, isolate, and display information indicative of what is…

CAD/CAM: Practical and Persuasive in Canadian Schools

ERIC Educational Resources Information Center

Willms, Ed

2007-01-01

Chances are that many high school students would not know how to use drafting instruments, but some might want to gain competence in computer-assisted design (CAD) and possibly computer-assisted manufacturing (CAM). These students are often attracted to tech courses by the availability of CAD/CAM instructions, and many go on to impress employers…

The Lower Manhattan Project: A New Approach to Computer-Assisted Learning in History Classrooms.

ERIC Educational Resources Information Center

Crozier, William; Gaffield, Chad

1990-01-01

The Lower Manhattan Project, a computer-assisted undergraduate course in U.S. history, enhances student appreciation of the historical process through research and writing. Focuses on the late nineteenth and early twentieth centuries emphasizing massive immigration, rapid industrialization, and the growth of cities. Includes a reading list and…

"A Technical Assistance Report" on Computer Technology Applications. Smithville School District, Smithville, Massachusetts.

ERIC Educational Resources Information Center

Merrimack Education Center, Chelmsford, MA.

This report of the Technical Assistance Study provided to the Smithville Public Schools by the Technology Lighthouse of the Merrimack Education Center offers information for use in planning computer technology applications over a 3-year period. It provides specific guidelines and criteria for planning and development, equipment considerations,…

Effectiveness of a Computer-Assisted Intervention for Young Children with Attention and Reading Problems

ERIC Educational Resources Information Center

Walcott, Christy M.; Marett, Katherine; Hessel, Amanda B.

2014-01-01

Children who are significantly inattentive and poor early readers require intervention, and traditional tutoring approaches may not be effective with this group. Using a single-subject, multiple-baseline-across-participants design, Study 1 examines whether a computer-assisted reading intervention increases performance for three first-grade…

Using Embedded Computer-Assisted Explicit Instruction to Teach Science to Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Smith, Bethany R.; Spooner, Fred; Wood, Charles L.

2013-01-01

For students with Autism Spectrum Disorders and intellectual disability, the need for scientific literacy is further complicated by the need for individualized instruction necessary to teach new skills, especially when those skills are academic. This study investigated the effects of embedded, computer-assisted explicit instruction to teach…

A Computer-Assisted-Instruction Course in Vocabulary Building through Latin and Greek Roots

ERIC Educational Resources Information Center

Scanlan, Richard T.

1976-01-01

A course in the enlargement of students' English vocabulary through the study of Latin and Greek roots and their derivatives was developed by the Department of Classics at the University of Illinois. The class makes use of computer assisted instruction on the PLATO IV system. (Author/RM)

Promoting Contextual Vocabulary Learning through an Adaptive Computer-Assisted EFL Reading System

ERIC Educational Resources Information Center

Wang, Y.-H.

2016-01-01

The study developed an adaptive computer-assisted reading system and investigated its effect on promoting English as a foreign language learner-readers' contextual vocabulary learning performance. Seventy Taiwanese college students were assigned to two reading groups. Participants in the customised reading group read online English texts, each of…

The Effect of Adaptive Confidence Strategies in Computer-Assisted Instruction on Learning and Learner Confidence

ERIC Educational Resources Information Center

Warren, Richard Daniel

2012-01-01

The purpose of this research was to investigate the effects of including adaptive confidence strategies in instructionally sound computer-assisted instruction (CAI) on learning and learner confidence. Seventy-one general educational development (GED) learners recruited from various GED learning centers at community colleges in the southeast United…

Variables that Affect Math Teacher Candidates' Intentions to Integrate Computer-Assisted Mathematics Education (CAME)

ERIC Educational Resources Information Center

Erdogan, Ahmet

2010-01-01

Based on Social Cognitive Carier Theory (SCCT) (Lent, Brown, & Hackett, 1994, 2002), this study tested the effects of mathematics teacher candidates' self-efficacy in, outcome expectations from, and interest in CAME on their intentions to integrate Computer-Assisted Mathematics Education (CAME). While mathematics teacher candidates' outcome…

Secondary School Mathematics Teachers' and Students' Views on Computer Assisted Mathematics Instruction in Turkey: Mathematica Example

ERIC Educational Resources Information Center

Ardiç, Mehmet Alper; Isleyen, Tevfik

2017-01-01

This study aimed at determining the secondary school mathematics teachers' and students' views on computer-assisted mathematics instruction (CAMI) conducted via Mathematica. Accordingly, three mathematics teachers in Adiyaman and nine 10th-grade students participated in the research. Firstly, the researchers trained the mathematics teachers in the…

An Intelligent Computer Assisted Language Learning System for Arabic Learners

ERIC Educational Resources Information Center

Shaalan, Khaled F.

2005-01-01

This paper describes the development of an intelligent computer-assisted language learning (ICALL) system for learning Arabic. This system could be used for learning Arabic by students at primary schools or by learners of Arabic as a second or foreign language. It explores the use of Natural Language Processing (NLP) techniques for learning…

Development and Evaluation of an Interactive Computer-Assisted Learning Program--A Novel Approach to Teaching Gynaecological Surgery.

ERIC Educational Resources Information Center

Jha, Vikram; Widdowson, Shelley; Duffy, Sean

2002-01-01

Discusses computer-assisted learning (CAL) in medical education and describes the development of an interactive CAL program on CD-ROM, combining video, illustrations, and three-dimensional images, to enhance understanding of vaginal hysterectomy in terms of the anatomy and steps of the surgical procedure. (Author/LRW)

Generative Computer-Assisted Instruction and Artificial Intelligence. Report No. 5.

ERIC Educational Resources Information Center

Sinnott, Loraine T.

This paper reviews the state-of-the-art in generative computer-assisted instruction and artificial intelligence. It divides relevant research into three areas of instructional modeling: models of the subject matter; models of the learner's state of knowledge; and models of teaching strategies. Within these areas, work sponsored by Advanced…

Associations among Teachers' Attitudes towards Computer-Assisted Education and TPACK Competencies

ERIC Educational Resources Information Center

Baturay, Meltem Huri; Gökçearslan, Sahin; Sahin, Semsettin

2017-01-01

The current study investigates the attitudes of teachers towards Computer-Assisted Education (CAE) and their knowledge of technology, pedagogy and content via TPACK model that assesses the competencies for developing and implementing successful teaching. There were 280 participants in the study. The results of the study indicate that teachers'…

A guide to Laboratory practicum on oscillations assisted by a computer

NASA Astrophysics Data System (ADS)

Russu, A. S.; Russu, S. S.; Pitac, C.

2013-12-01

The booklet contains descriptions of 3 Laboratory works on oscillations (n.9, 10,11) for students of Chisinau Technical University. They represent a modernized versions by a computer assistance of older ones which were first put in 1964. In each case it includes theoretical outlines, the work instruction, control questions.

Microcomputer Based Computer-Assisted Learning System: CASTLE.

ERIC Educational Resources Information Center

Garraway, R. W. T.

The purpose of this study was to investigate the extent to which a sophisticated computer assisted instruction (CAI) system could be implemented on the type of microcomputer system currently found in the schools. A method was devised for comparing CAI languages and was used to rank five common CAI languages. The highest ranked language, NATAL,…

Integrating Computer-Assisted Translation Tools into Language Learning

ERIC Educational Resources Information Center

Fernández-Parra, María

2016-01-01

Although Computer-Assisted Translation (CAT) tools play an important role in the curriculum in many university translator training programmes, they are seldom used in the context of learning a language, as a good command of a language is needed before starting to translate. Since many institutions often have translator-training programmes as well…

Augmented Reality Based Navigation for Computer Assisted Hip Resurfacing: A Proof of Concept Study.

PubMed

Liu, He; Auvinet, Edouard; Giles, Joshua; Rodriguez Y Baena, Ferdinando

2018-05-23

Implantation accuracy has a great impact on the outcomes of hip resurfacing such as recovery of hip function. Computer assisted orthopedic surgery has demonstrated clear advantages for the patients, with improved placement accuracy and fewer outliers, but the intrusiveness, cost, and added complexity have limited its widespread adoption. To provide seamless computer assistance with improved immersion and a more natural surgical workflow, we propose an augmented-reality (AR) based navigation system for hip resurfacing. The operative femur is registered by processing depth information from the surgical site with a commercial depth camera. By coupling depth data with robotic assistance, obstacles that may obstruct the femur can be tracked and avoided automatically to reduce the chance of disruption to the surgical workflow. Using the registration result and the pre-operative plan, intra-operative surgical guidance is provided through a commercial AR headset so that the user can perform the operation without additional physical guides. To assess the accuracy of the navigation system, experiments of guide hole drilling were performed on femur phantoms. The position and orientation of the drilled holes were compared with the pre-operative plan, and the mean errors were found to be approximately 2 mm and 2°, results which are in line with commercial computer assisted orthopedic systems today.

Improving computer usage for students with physical disabilities through a collaborative approach: a pilot study.

PubMed

Borgestig, Maria; Falkmer, Torbjörn; Hemmingsson, Helena

2013-11-01

The aim of this study was to evaluate the effect of an assistive technology (AT) intervention to improve the use of available computers as assistive technology in educational tasks for students with physical disabilities during an ongoing school year. Fifteen students (aged 12-18) with physical disabilities, included in mainstream classrooms in Sweden, and their teachers took part in the intervention. Pre-, post-, and follow-up data were collected with Goal Attainment Scaling (GAS), a computer usage diary, and with the Psychosocial Impact of Assistive Devices Scale (PIADS). Teachers' opinions of goal setting were collected at follow-up. The intervention improved the goal-related computer usage in educational tasks and teachers reported they would use goal setting again when appropriate. At baseline, students reported a positive impact from computer usage with no differences over time regarding the PIADS subscales independence, adaptability, or self-esteem. The AT intervention showed a positive effect on computer usage as AT in mainstream schools. Some additional support to teachers is recommended as not all students improved in all goal-related computer usage. A clinical implication is that students' computer usage can be improved and collaboratively established computer-based strategies can be carried out by teachers in mainstream schools.

Irradiation control parameters for computer-assisted laser photocoagulation of the retina

NASA Astrophysics Data System (ADS)

Naess, Espen; Molvik, Torstein; Barrett, Steven F.; Wright, Cameron H. G.; de Graaf, Peter W.

2001-06-01

A system for robotically assisted retinal surgery has been developed to rapidly and safely place lesions on the retina for photocoagulation therapy. This system provides real- time, motion stabilized lesion placement for typical irradiation times of 100 ms. The system consists of three main subsystems: a global, digital-based tracking subsystem; a fast, local analog tracking subsystem; and a confocal reflectance subsystem to control lesion parameters dynamically. We have reported on these subsystems in previous SPIE presentations. This paper concentrates on the development of the second hybrid system prototype. Considerable progress has been made toward reducing the footprint of the optical system, simplifying the user interface, fully characterizing the analog tracking system and using measurable lesion reflectance growth parameters to develop a noninvasive method to infer lesion depth. This method will allow dynamic control of laser dosimetry to provide similar lesions across the non-uniform retinal surface. These system improvements and progress toward a clinically significant system are covered in detail within this paper.

Training Students as Technology Assistants.

ERIC Educational Resources Information Center

Onishi, Esther; Peto, Erica

1996-01-01

Describes a program where fifth and sixth graders are trained as school technology assistants. The childrens' duties include installation of software, making minor repairs, cleaning computer equipment, and assisting teachers and students. Outlines components of the program, lists forms the assistants use and skills they are taught, and provides…

A hierarchical knowledge-based approach for retrieving similar medical images described with semantic annotations

PubMed Central

Kurtz, Camille; Beaulieu, Christopher F.; Napel, Sandy; Rubin, Daniel L.

2014-01-01

Computer-assisted image retrieval applications could assist radiologist interpretations by identifying similar images in large archives as a means to providing decision support. However, the semantic gap between low-level image features and their high level semantics may impair the system performances. Indeed, it can be challenging to comprehensively characterize the images using low-level imaging features to fully capture the visual appearance of diseases on images, and recently the use of semantic terms has been advocated to provide semantic descriptions of the visual contents of images. However, most of the existing image retrieval strategies do not consider the intrinsic properties of these terms during the comparison of the images beyond treating them as simple binary (presence/absence) features. We propose a new framework that includes semantic features in images and that enables retrieval of similar images in large databases based on their semantic relations. It is based on two main steps: (1) annotation of the images with semantic terms extracted from an ontology, and (2) evaluation of the similarity of image pairs by computing the similarity between the terms using the Hierarchical Semantic-Based Distance (HSBD) coupled to an ontological measure. The combination of these two steps provides a means of capturing the semantic correlations among the terms used to characterize the images that can be considered as a potential solution to deal with the semantic gap problem. We validate this approach in the context of the retrieval and the classification of 2D regions of interest (ROIs) extracted from computed tomographic (CT) images of the liver. Under this framework, retrieval accuracy of more than 0.96 was obtained on a 30-images dataset using the Normalized Discounted Cumulative Gain (NDCG) index that is a standard technique used to measure the effectiveness of information retrieval algorithms when a separate reference standard is available. Classification results of more than 95% were obtained on a 77-images dataset. For comparison purpose, the use of the Earth Mover's Distance (EMD), which is an alternative distance metric that considers all the existing relations among the terms, led to results retrieval accuracy of 0.95 and classification results of 93% with a higher computational cost. The results provided by the presented framework are competitive with the state-of-the-art and emphasize the usefulness of the proposed methodology for radiology image retrieval and classification. PMID:24632078

Computational analyses of spectral trees from electrospray multi-stage mass spectrometry to aid metabolite identification.

PubMed

Cao, Mingshu; Fraser, Karl; Rasmussen, Susanne

2013-10-31

Mass spectrometry coupled with chromatography has become the major technical platform in metabolomics. Aided by peak detection algorithms, the detected signals are characterized by mass-over-charge ratio (m/z) and retention time. Chemical identities often remain elusive for the majority of the signals. Multi-stage mass spectrometry based on electrospray ionization (ESI) allows collision-induced dissociation (CID) fragmentation of selected precursor ions. These fragment ions can assist in structural inference for metabolites of low molecular weight. Computational investigations of fragmentation spectra have increasingly received attention in metabolomics and various public databases house such data. We have developed an R package "iontree" that can capture, store and analyze MS2 and MS3 mass spectral data from high throughput metabolomics experiments. The package includes functions for ion tree construction, an algorithm (distMS2) for MS2 spectral comparison, and tools for building platform-independent ion tree (MS2/MS3) libraries. We have demonstrated the utilization of the package for the systematic analysis and annotation of fragmentation spectra collected in various metabolomics platforms, including direct infusion mass spectrometry, and liquid chromatography coupled with either low resolution or high resolution mass spectrometry. Assisted by the developed computational tools, we have demonstrated that spectral trees can provide informative evidence complementary to retention time and accurate mass to aid with annotating unknown peaks. These experimental spectral trees once subjected to a quality control process, can be used for querying public MS2 databases or de novo interpretation. The putatively annotated spectral trees can be readily incorporated into reference libraries for routine identification of metabolites.

Feasibility of a computer-assisted feedback system between dispatch centre and ambulances.

PubMed

Lindström, Veronica; Karlsten, Rolf; Falk, Ann-Charlotte; Castrèn, Maaret

2011-06-01

The aim of the study was to evaluate the feasibility of a newly developed computer-assisted feedback system between dispatch centre and ambulances in Stockholm, Sweden. A computer-assisted feedback system based on a Finnish model was designed to fit the Swedish emergency medical system. Feedback codes were identified and divided into three categories; assessment of patients' primary condition when ambulance arrives at scene, no transport by the ambulance and level of priority. Two ambulances and one emergency medical communication centre (EMCC) in Stockholm participated in the study. A sample of 530 feedback codes sent through the computer-assisted feedback system was reviewed. The information on the ambulance medical records was compared with the feedback codes used and 240 assignments were further analyzed. The used feedback codes sent from ambulance to EMCC were correct in 92% of the assignments. The most commonly used feedback code sent to the emergency medical dispatchers was 'agree with the dispatchers' assessment'. In addition, in 160 assignments there was a mismatch between emergency medical dispatchers and ambulance nurse assessments. Our results have shown a high agreement between medical dispatchers and ambulance nurse assessment. The feasibility of the feedback codes seems to be acceptable based on the small margin of error. The computer-assisted feedback system may, when used on a daily basis, make it possible for the medical dispatchers to receive feedback in a structural way. The EMCC organization can directly evaluate any changes in the assessment protocol by structured feedback sent from the ambulance.

Embedded systems for supporting computer accessibility.

PubMed

Mulfari, Davide; Celesti, Antonio; Fazio, Maria; Villari, Massimo; Puliafito, Antonio

2015-01-01

Nowadays, customized AT software solutions allow their users to interact with various kinds of computer systems. Such tools are generally available on personal devices (e.g., smartphones, laptops and so on) commonly used by a person with a disability. In this paper, we investigate a way of using the aforementioned AT equipments in order to access many different devices without assistive preferences. The solution takes advantage of open source hardware and its core component consists of an affordable Linux embedded system: it grabs data coming from the assistive software, which runs on the user's personal device, then, after processing, it generates native keyboard and mouse HID commands for the target computing device controlled by the end user. This process supports any operating system available on the target machine and it requires no specialized software installation; therefore the user with a disability can rely on a single assistive tool to control a wide range of computing platforms, including conventional computers and many kinds of mobile devices, which receive input commands through the USB HID protocol.

Are we there yet? Evaluating commercial grade brain-computer interface for control of computer applications by individuals with cerebral palsy.

PubMed

Taherian, Sarvnaz; Selitskiy, Dmitry; Pau, James; Claire Davies, T

2017-02-01

Using a commercial electroencephalography (EEG)-based brain-computer interface (BCI), the training and testing protocol for six individuals with spastic quadriplegic cerebral palsy (GMFCS and MACS IV and V) was evaluated. A customised, gamified training paradigm was employed. Over three weeks, the participants spent two sessions exploring the system, and up to six sessions playing the game which focussed on EEG feedback of left and right arm motor imagery. The participants showed variable inconclusive results in the ability to produce two distinct EEG patterns. Participant performance was influenced by physical illness, motivation, fatigue and concentration. The results from this case study highlight the infancy of BCIs as a form of assistive technology for people with cerebral palsy. Existing commercial BCIs are not designed according to the needs of end-users. Implications for Rehabilitation Mood, fatigue, physical illness and motivation influence the usability of a brain-computer interface. Commercial brain-computer interfaces are not designed for practical assistive technology use for people with cerebral palsy. Practical brain-computer interface assistive technologies may need to be flexible to suit individual needs.

Alternative methods for the median lethal dose (LD(50)) test: the up-and-down procedure for acute oral toxicity.

PubMed

Rispin, Amy; Farrar, David; Margosches, Elizabeth; Gupta, Kailash; Stitzel, Katherine; Carr, Gregory; Greene, Michael; Meyer, William; McCall, Deborah

2002-01-01

The authors have developed an improved version of the up-and-down procedure (UDP) as one of the replacements for the traditional acute oral toxicity test formerly used by the Organisation for Economic Co-operation and Development member nations to characterize industrial chemicals, pesticides, and their mixtures. This method improves the performance of acute testing for applications that use the median lethal dose (classic LD50) test while achieving significant reductions in animal use. It uses sequential dosing, together with sophisticated computer-assisted computational methods during the execution and calculation phases of the test. Staircase design, a form of sequential test design, can be applied to acute toxicity testing with its binary experimental endpoints (yes/no outcomes). The improved UDP provides a point estimate of the LD50 and approximate confidence intervals in addition to observed toxic signs for the substance tested. It does not provide information about the dose-response curve. Computer simulation was used to test performance of the UDP without the need for additional laboratory validation.

Preliminary development of a workstation for craniomaxillofacial surgical procedures: introducing a computer-assisted planning and execution system.

PubMed

Gordon, Chad R; Murphy, Ryan J; Coon, Devin; Basafa, Ehsan; Otake, Yoshito; Al Rakan, Mohammed; Rada, Erin; Susarla, Srinivas; Susarla, Sriniras; Swanson, Edward; Fishman, Elliot; Santiago, Gabriel; Brandacher, Gerald; Liacouras, Peter; Grant, Gerald; Armand, Mehran

2014-01-01

Facial transplantation represents one of the most complicated scenarios in craniofacial surgery because of skeletal, aesthetic, and dental discrepancies between donor and recipient. However, standard off-the-shelf vendor computer-assisted surgery systems may not provide custom features to mitigate the increased complexity of this particular procedure. We propose to develop a computer-assisted surgery solution customized for preoperative planning, intraoperative navigation including cutting guides, and dynamic, instantaneous feedback of cephalometric measurements/angles as needed for facial transplantation and other related craniomaxillofacial procedures. We developed the Computer-Assisted Planning and Execution (CAPE) workstation to assist with planning and execution of facial transplantation. Preoperative maxillofacial computed tomography (CT) scans were obtained on 4 size-mismatched miniature swine encompassing 2 live face-jaw-teeth transplants. The system was tested in a laboratory setting using plastic models of mismatched swine, after which the system was used in 2 live swine transplants. Postoperative CT imaging was obtained and compared with the preoperative plan and intraoperative measures from the CAPE workstation for both transplants. Plastic model tests familiarized the team with the CAPE workstation and identified several defects in the workflow. Live swine surgeries demonstrated utility of the CAPE system in the operating room, showing submillimeter registration error of 0.6 ± 0.24 mm and promising qualitative comparisons between intraoperative data and postoperative CT imaging. The initial development of the CAPE workstation demonstrated that integration of computer planning and intraoperative navigation for facial transplantation are possible with submillimeter accuracy. This approach can potentially improve preoperative planning, allowing ideal donor-recipient matching despite significant size mismatch, and accurate surgical execution for numerous types of craniofacial and orthognathic surgical procedures.

The current status and future prospects of computer-assisted hip surgery.

PubMed

Inaba, Yutaka; Kobayashi, Naomi; Ike, Hiroyuki; Kubota, So; Saito, Tomoyuki

2016-03-01

The advances in computer assistance technology have allowed detailed three-dimensional preoperative planning and simulation of preoperative plans. The use of a navigation system as an intraoperative assistance tool allows more accurate execution of the preoperative plan, compared to manual operation without assistance of the navigation system. In total hip arthroplasty using CT-based navigation, three-dimensional preoperative planning with computer software allows the surgeon to determine the optimal angle of implant placement at which implant impingement is unlikely to occur in the range of hip joint motion necessary for daily activities of living, and to determine the amount of three-dimensional correction for leg length and offset. With the use of computer navigation for intraoperative assistance, the preoperative plan can be precisely executed. In hip osteotomy using CT-based navigation, the navigation allows three-dimensional preoperative planning, intraoperative confirmation of osteotomy sites, safe performance of osteotomy even under poor visual conditions, and a reduction in exposure doses from intraoperative fluoroscopy. Positions of the tips of chisels can be displayed on the computer monitor during surgery in real time, and staff other than the operator can also be aware of the progress of surgery. Thus, computer navigation also has an educational value. On the other hand, its limitations include the need for placement of trackers, increased radiation exposure from preoperative CT scans, and prolonged operative time. Moreover, because the position of a bone fragment cannot be traced after osteotomy, methods to find its precise position after its movement need to be developed. Despite the need to develop methods for the postoperative evaluation of accuracy for osteotomy, further application and development of these systems are expected in the future. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

One Small Step for Manuals: Computer-Assisted Training in Twelve-Step Facilitation*

PubMed Central

Sholomskas, Diane E.; Carroll, Kathleen M.

2008-01-01

Objective The burgeoning number of empirically validated therapies has not been met with systematic evaluation of practical, inexpensive means of teaching large numbers of clinicians to use these treatments effectively. An interactive, computer-assisted training program that sought to impart skills associated with the Project MATCH (Matching Alcoholism Treatments to Client Heterogeneity) Twelve-Step Facilitation (TSF) manual was developed to address this need. Method Twenty-five community-based substance use-treatment clinicians were randomized to one of two training conditions: (1) access to the computer-assisted training program plus the TSF manual or (2) access to the manual only. The primary outcome measure was change from pre- to posttraining in the clinicians' ability to demonstrate key TSF skills. Results The data suggested that the clinicians' ability to implement TSF, as assessed by independent ratings of adherence and skill for the key TSF interventions, was significantly higher after training for those who had access to the computerized training condition than those who were assigned to the manual-only condition. Those assigned to the computer-assisted training condition also demonstrated greater gains in a knowledge test assessing familiarity with concepts presented in the TSF manual. Conclusions Computer-based training may be a feasible and effective means of training larger numbers of clinicians in empirically supported, manual-guided therapies. PMID:17061013

One small step for manuals: Computer-assisted training in twelve-step facilitation.

PubMed

Sholomskas, Diane E; Carroll, Kathleen M

2006-11-01

The burgeoning number of empirically validated therapies has not been met with systematic evaluation of practical, inexpensive means of teaching large numbers of clinicians to use these treatments effectively. An interactive, computer-assisted training program that sought to impart skills associated with the Project MATCH (Matching Alcoholism Treatments to Client Heterogeneity) Twelve-Step Facilitation (TSF) manual was developed to address this need. Twenty-five community-based substance use-treatment clinicians were randomized to one of two training conditions: (1) access to the computer- assisted training program plus the TSF manual or (2) access to the manual only. The primary outcome measure was change from preto posttraining in the clinicians' ability to demonstrate key TSF skills. The data suggested that the clinicians' ability to implement TSF, as assessed by independent ratings of adherence and skill for the key TSF interventions, was significantly higher after training for those who had access to the computerized training condition than those who were assigned to the manual-only condition. Those assigned to the computer-assisted training condition also demonstrated greater gains in a knowledge test assessing familiarity with concepts presented in the TSF manual. Computer-based training may be a feasible and effective means of training larger numbers of clinicians in empirically supported, manual-guided therapies.

From biological neural networks to thinking machines: Transitioning biological organizational principles to computer technology

NASA Technical Reports Server (NTRS)

Ross, Muriel D.

1991-01-01

The three-dimensional organization of the vestibular macula is under study by computer assisted reconstruction and simulation methods as a model for more complex neural systems. One goal of this research is to transition knowledge of biological neural network architecture and functioning to computer technology, to contribute to the development of thinking computers. Maculas are organized as weighted neural networks for parallel distributed processing of information. The network is characterized by non-linearity of its terminal/receptive fields. Wiring appears to develop through constrained randomness. A further property is the presence of two main circuits, highly channeled and distributed modifying, that are connected through feedforward-feedback collaterals and biasing subcircuit. Computer simulations demonstrate that differences in geometry of the feedback (afferent) collaterals affects the timing and the magnitude of voltage changes delivered to the spike initiation zone. Feedforward (efferent) collaterals act as voltage followers and likely inhibit neurons of the distributed modifying circuit. These results illustrate the importance of feedforward-feedback loops, of timing, and of inhibition in refining neural network output. They also suggest that it is the distributed modifying network that is most involved in adaptation, memory, and learning. Tests of macular adaptation, through hyper- and microgravitational studies, support this hypothesis since synapses in the distributed modifying circuit, but not the channeled circuit, are altered. Transitioning knowledge of biological systems to computer technology, however, remains problematical.

Accuracy in planar cutting of bones: an ISO-based evaluation.

PubMed

Cartiaux, Olivier; Paul, Laurent; Docquier, Pierre-Louis; Francq, Bernard G; Raucent, Benoît; Dombre, Etienne; Banse, Xavier

2009-03-01

Computer- and robot-assisted technologies are capable of improving the accuracy of planar cutting in orthopaedic surgery. This study is a first step toward formulating and validating a new evaluation methodology for planar bone cutting, based on the standards from the International Organization for Standardization. Our experimental test bed consisted of a purely geometrical model of the cutting process around a simulated bone. Cuts were performed at three levels of surgical assistance: unassisted, computer-assisted and robot-assisted. We measured three parameters of the standard ISO1101:2004: flatness, parallelism and location of the cut plane. The location was the most relevant parameter for assessing cutting errors. The three levels of assistance were easily distinguished using the location parameter. Our ISO methodology employs the location to obtain all information about translational and rotational cutting errors. Location may be used on any osseous structure to compare the performance of existing assistance technologies.

Computer-Aided Design/Computer-Assisted Manufacture Monolithic Restorations for Severely Worn Dentition: A Case History Report.

PubMed

Abou-Ayash, Samir; Boldt, Johannes; Vuck, Alexander

Full-arch rehabilitation of patients with severe tooth wear due to parafunctional behavior is a challenge for dentists and dental technicians, especially when a highly esthetic outcome is desired. A variety of different treatment options and prosthetic materials are available for such a clinical undertaking. The ongoing progress of computer-aided design/computer-assisted manufacture technologies in combination with all-ceramic materials provides a predictable workflow for these complex cases. This case history report describes a comprehensive, step-by-step treatment protocol leading to an optimally predictable treatment outcome for an esthetically compromised patient.

Personalized, relevance-based Multimodal Robotic Imaging and augmented reality for Computer Assisted Interventions.

PubMed

Navab, Nassir; Fellow, Miccai; Hennersperger, Christoph; Frisch, Benjamin; Fürst, Bernhard

2016-10-01

In the last decade, many researchers in medical image computing and computer assisted interventions across the world focused on the development of the Virtual Physiological Human (VPH), aiming at changing the practice of medicine from classification and treatment of diseases to that of modeling and treating patients. These projects resulted in major advancements in segmentation, registration, morphological, physiological and biomechanical modeling based on state of art medical imaging as well as other sensory data. However, a major issue which has not yet come into the focus is personalizing intra-operative imaging, allowing for optimal treatment. In this paper, we discuss the personalization of imaging and visualization process with particular focus on satisfying the challenging requirements of computer assisted interventions. We discuss such requirements and review a series of scientific contributions made by our research team to tackle some of these major challenges. Copyright © 2016. Published by Elsevier B.V.

Three-Dimensional Computer-Assisted Two-Layer Elastic Models of the Face.

PubMed

Ueda, Koichi; Shigemura, Yuka; Otsuki, Yuki; Fuse, Asuka; Mitsuno, Daisuke

2017-11-01

To make three-dimensional computer-assisted elastic models for the face, we decided on five requirements: (1) an elastic texture like skin and subcutaneous tissue; (2) the ability to take pen marking for incisions; (3) the ability to be cut with a surgical knife; (4) the ability to keep stitches in place for a long time; and (5) a layered structure. After testing many elastic solvents, we have made realistic three-dimensional computer-assisted two-layer elastic models of the face and cleft lip from the computed tomographic and magnetic resonance imaging stereolithographic data. The surface layer is made of polyurethane and the inner layer is silicone. Using this elastic model, we taught residents and young doctors how to make several typical local flaps and to perform cheiloplasty. They could experience realistic simulated surgery and understand three-dimensional movement of the flaps.

Development and application of operational techniques for the inventory and monitoring of resources and uses for the Texas coastal zone. Volume 1: Text

NASA Technical Reports Server (NTRS)

Harwood, P. (Principal Investigator); Finley, R.; Mcculloch, S.; Malin, P. A.; Schell, J. A.

1977-01-01

The author has identified the following significant results. Image interpretation and computer-assisted techniques were developed to analyze LANDSAT scenes in support of resource inventory and monitoring requirements for the Texas coastal region. Land cover and land use maps, at a scale of 1:125,000 for the image interpretation product and 1:24,000 for the computer-assisted product, were generated covering four Texas coastal test sites. Classification schemes which parallel national systems were developed for each procedure, including 23 classes for image interpretation technique and 13 classes for the computer-assisted technique. Results indicate that LANDSAT-derived land cover and land use maps can be successfully applied to a variety of planning and management activities on the Texas coast. Computer-derived land/water maps can be used with tide gage data to assess shoreline boundaries for management purposes.

Automatic differentiation for Fourier series and the radii polynomial approach

NASA Astrophysics Data System (ADS)

Lessard, Jean-Philippe; Mireles James, J. D.; Ransford, Julian

2016-11-01

In this work we develop a computer-assisted technique for proving existence of periodic solutions of nonlinear differential equations with non-polynomial nonlinearities. We exploit ideas from the theory of automatic differentiation in order to formulate an augmented polynomial system. We compute a numerical Fourier expansion of the periodic orbit for the augmented system, and prove the existence of a true solution nearby using an a-posteriori validation scheme (the radii polynomial approach). The problems considered here are given in terms of locally analytic vector fields (i.e. the field is analytic in a neighborhood of the periodic orbit) hence the computer-assisted proofs are formulated in a Banach space of sequences satisfying a geometric decay condition. In order to illustrate the use and utility of these ideas we implement a number of computer-assisted existence proofs for periodic orbits of the Planar Circular Restricted Three-Body Problem (PCRTBP).

Computer Literacy for Teachers.

ERIC Educational Resources Information Center

Sarapin, Marvin I.; Post, Paul E.

Basic concepts of computer literacy are discussed as they relate to industrial arts/technology education. Computer hardware development is briefly examined, and major software categories are defined, including database management, computer graphics, spreadsheet programs, telecommunications and networking, word processing, and computer assisted and…

High Tech: A Place in Our Lives and in Our Schools.

ERIC Educational Resources Information Center

Roach, John V.

1986-01-01

Discusses various aspects of high technology: computers in cars, computer-assisted design and manufacturing, computers in telephones, video recorders, laser technology, home computers, job training, computer education, and the challenge to the technology teacher. (CT)

At Their Own Pace: Interim Findings from an Evaluation of a Computer-Assisted, Modular Approach to Developmental Math

ERIC Educational Resources Information Center

Gardenhire, Alissa; Diamond, John; Headlam, Camielle; Weiss, Michael J.

2016-01-01

Community colleges nationwide are looking for solutions to help students complete developmental (remedial) math--a known barrier to graduation. Some are offering computer-assisted, modular developmental math courses that allow students to earn credits incrementally and move through the curriculum at their own pace. One of these modularized…

Comparative Effects of Two Modes of Computer-Assisted Instructional Package on Solid Geometry Achievement

ERIC Educational Resources Information Center

Gambari, Isiaka Amosa; Ezenwa, Victoria Ifeoma; Anyanwu, Romanus Chogozie

2014-01-01

The study examined the effects of two modes of computer-assisted instructional package on solid geometry achievement amongst senior secondary school students in Minna, Niger State, Nigeria. Also, the influence of gender on the performance of students exposed to CAI(AT) and CAI(AN) packages were examined. This study adopted a pretest-posttest…

Improving the Efficiency and Effectiveness of Grading through the Use of Computer-Assisted Grading Rubrics

ERIC Educational Resources Information Center

Anglin, Linda; Anglin, Kenneth; Schumann, Paul L.; Kaliski, John A.

2008-01-01

This study tests the use of computer-assisted grading rubrics compared to other grading methods with respect to the efficiency and effectiveness of different grading processes for subjective assignments. The test was performed on a large Introduction to Business course. The students in this course were randomly assigned to four treatment groups…

Problem Manual for Instructional Decision-Making Module; Volume 2: A Computer Assisted Instruction Module. Document Number 4.

ERIC Educational Resources Information Center

Bessent, E. Wailand; And Others

Provided in the manual are background material, problems, and worksheets designed for graduate students involved in a computer assisted instruction (CAI) approach to supervisor training. Included are a faculty handbook for a simulated school in a mythical community, a practice problem to familiarize the student with terminal operation, and eight…

Applying Computer-Assisted Musical Instruction to Music Appreciation Course: An Example with Chinese Musical Instruments

ERIC Educational Resources Information Center

Lou, Shi-Jer; Guo, Yuan-Chang; Zhu, Yi-Zhen; Shih, Ru-Chu; Dzan, Wei-Yuan

2011-01-01

This study aims to explore the effectiveness of computer-assisted musical instruction (CAMI) in the Learning Chinese Musical Instruments (LCMI) course. The CAMI software for Chinese musical instruments was developed and administered to 228 students in a vocational high school. A pretest-posttest non-equivalent control group design with three…

Brother-Sister Incest: Data from Anonymous Computer-Assisted Self Interviews

ERIC Educational Resources Information Center

Stroebel, Sandra S.; O'Keefe, Stephen L.; Beard, Keith W.; Kuo, Shih-Ya; Swindell, Samuel; Stroupe, Walter

2013-01-01

Retrospective data were entered anonymously by 1,521 adult women using computer-assisted self interview. Forty were classified as victims of brother-sister incest, 19 were classified as victims of father-daughter incest, and 232 were classified as victims of sexual abuse by an adult other than their father before reaching 18 years of age. The…

A Cross-Cultural Study on the Attitudes of English Language Students towards Computer-Assisted Language Learning

ERIC Educational Resources Information Center

Tafazoli, Dara; Gómez Parra, Mª Elena; Huertas Abril, Cristina A.

2018-01-01

The purpose of this study was to compare the attitude of Iranian and non-Iranian English language students' attitudes towards Computer-Assisted Language Learning (CALL). Furthermore, the relations of gender, education level, and age to their attitude are investigated. A convergent mixed methods design was used for analyzing both quantitative and…

Effects of Computer-Assisted Instruction on Performance of Senior High School Biology Students in Ghana

ERIC Educational Resources Information Center

Owusu, K. A.; Monney, K. A.; Appiah, J. Y.; Wilmot, E. M.

2010-01-01

This study investigated the comparative efficiency of computer-assisted instruction (CAI) and conventional teaching method in biology on senior high school students. A science class was selected in each of two randomly selected schools. The pretest-posttest non equivalent quasi experimental design was used. The students in the experimental group…

The Impact of Computer-Assisted Instruction on Mathematics Achievement of Underachieving Fifth-Grade Students

ERIC Educational Resources Information Center

Bruce-Simmons, Christine

2013-01-01

This study examined the impact of computer-assisted instruction on the mathematics performance of underachieving fifth-grade students in a rural school district in South Carolina. The instructional technology program ([IF) is South Carolina's response to addressing the needs of its young, struggling math students. The 449 fifth-grade students in…

Evaluation of the Computer Assisted Instruction Title I Project, 1980-81.

ERIC Educational Resources Information Center

Metrics Associates, Inc., Chelmsford, MA.

For the third year, six Massachusetts communities incorporated computer assisted instruction (CAI) into their regular Title I programs, for students in grades 1 through 9. It was hoped that CAI would produce reading and mathematics gains over and above those which are characteristic of more conventional Title I instructional approaches. A pretest,…