Vertical Stream Curricula Integration of Problem-Based Learning Using an Autonomous Vacuum Robot in a Mechatronics Course

ERIC Educational Resources Information Center

Chin, Cheng; Yue, Keng

2011-01-01

Difficulties in teaching a multi-disciplinary subject such as the mechatronics system design module in Departments of Mechatronics Engineering at Temasek Polytechnic arise from the gap in experience and skill among staff and students who have different backgrounds in mechanical, computer and electrical engineering within the Mechatronics…

Designing a hands-on brain computer interface laboratory course.

PubMed

Khalighinejad, Bahar; Long, Laura Kathleen; Mesgarani, Nima

2016-08-01

Devices and systems that interact with the brain have become a growing field of research and development in recent years. Engineering students are well positioned to contribute to both hardware development and signal analysis techniques in this field. However, this area has been left out of most engineering curricula. We developed an electroencephalography (EEG) based brain computer interface (BCI) laboratory course to educate students through hands-on experiments. The course is offered jointly by the Biomedical Engineering, Electrical Engineering, and Computer Science Departments of Columbia University in the City of New York and is open to senior undergraduate and graduate students. The course provides an effective introduction to the experimental design, neuroscience concepts, data analysis techniques, and technical skills required in the field of BCI.

Training in software used by practising engineers should be included in university curricula

NASA Astrophysics Data System (ADS)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors," IEEE Trans. Educ., vol. 45, pp. 50- 56, Feb. 2002. [3] I. Vélez, and J. F. Sevillano, "A course to train digital hardware designers for industry," IEEE Trans. Educ., vol. 50, pp. 236-243, Aug. 2007. Acknowledgement: This work was supported in part by the Universidad Politécnica de Madrid, Spain.

Designing a Hands-On Brain Computer Interface Laboratory Course

PubMed Central

Khalighinejad, Bahar; Long, Laura Kathleen; Mesgarani, Nima

2017-01-01

Devices and systems that interact with the brain have become a growing field of research and development in recent years. Engineering students are well positioned to contribute to both hardware development and signal analysis techniques in this field. However, this area has been left out of most engineering curricula. We developed an electroencephalography (EEG) based brain computer interface (BCI) laboratory course to educate students through hands-on experiments. The course is offered jointly by the Biomedical Engineering, Electrical Engineering, and Computer Science Departments of Columbia University in the City of New York and is open to senior undergraduate and graduate students. The course provides an effective introduction to the experimental design, neuroscience concepts, data analysis techniques, and technical skills required in the field of BCI. PMID:28268946

Two Approaches to Engineering Design:Observations in sTEm Education

ERIC Educational Resources Information Center

Kelley, Todd R.; Brenner, Daniel C.; Pieper, Jon T.

2010-01-01

A comparative study was conducted to compare two approaches to engineering design curriculum across different schools (inter-school) and across two curricula "Project Lead the Way and Engineering Projects in Community Service" (inter-curricula). The researchers collected curricula material including handouts, lesson plans, guides,…

Engineering Education: Environmental and Chemical Engineering or Technology Curricula--A European Perspective

ERIC Educational Resources Information Center

Glavic, Peter; Lukman, Rebeka; Lozano, Rodrigo

2009-01-01

Over recent years, universities have been incorporating sustainable development (SD) into their systems, including their curricula. This article analyses the incorporation of SD into the curricula of chemical and environmental engineering or technology bachelor degrees at universities in the European Union (EU) and European Free Trade Association…

Proceedings of the Annual Ada Software Engineering Education and Training Symposium (6th), Held in Alexandria, Virginia on September 11-13, 1991

DTIC Science & Technology

1991-09-01

level are, by necessity, designed to be accomplished by one or a few students in the course of a single academic term. Moreover, the software is seldom...that are covered in Computer Science curricula today, but with more of an engineering structure added. A stronger engineering design component is...ing, and sound software design principles found throughout Ada, and they are unambiguously specified. These are not features which were grafted onto a

A Virtual Embedded Microcontroller Laboratory for Undergraduate Education: Development and Evaluation

ERIC Educational Resources Information Center

Richardson, Jeffrey J.; Adamo-Villani, Nicoletta

2010-01-01

Laboratory instruction is a major component of the engineering and technology undergraduate curricula. Traditional laboratory instruction is hampered by several factors including limited access to resources by students and high laboratory maintenance cost. A photorealistic 3D computer-simulated laboratory for undergraduate instruction in…

Understanding Computation of Impulse Response in Microwave Software Tools

ERIC Educational Resources Information Center

Potrebic, Milka M.; Tosic, Dejan V.; Pejovic, Predrag V.

2010-01-01

In modern microwave engineering curricula, the introduction of the many new topics in microwave industrial development, or of software tools for design and simulation, sometimes results in students having an inadequate understanding of the fundamental theory. The terminology for and the explanation of algorithms for calculating impulse response in…

The Impact of Technology on Hawaii's Automotive Mechanics: An Analysis with Recommendations. Technological Impact Study Series.

ERIC Educational Resources Information Center

Allen, Robert

Because of the increasing use of microelectronic componentry in automobiles, vocational educators must reexamine existing automotive mechanics curricula to ensure that they can continue to provide relevant job training. After examining recent trends in the impact of computers and electronics on automotive design and engineering, existing auto…

Creating Next Generation Teacher Preparation Programs to Support Implementation of the Next Generation Science Standards and Common Core State Standards in K-12 Schools: An Opportunity for the Earth and Space Sciences

NASA Astrophysics Data System (ADS)

Geary, E. E.; Egger, A. E.; Julin, S.; Ronca, R.; Vokos, S.; Ebert, E.; Clark-Blickenstaff, J.; Nollmeyer, G.

2015-12-01

A consortium of two and four year Washington State Colleges and Universities in partnership with Washington's Office of the Superintendent of Public Instruction (OSPI), the Teachers of Teachers of Science, and Teachers of Teachers of Mathematics, and other key stakeholders, is currently working to improve science and mathematics learning for all Washington State students by creating a new vision for STEM teacher preparation in Washington State aligned with the Next Generation Science Standards (NGSS) and the Common Core State Standards (CCSS) in Mathematics and Language Arts. Specific objectives include: (1) strengthening elementary and secondary STEM Teacher Preparation courses and curricula, (2) alignment of STEM teacher preparation programs across Washington State with the NGSS and CCSS, (3) development of action plans to support implementation of STEM Teacher Preparation program improvement at Higher Education Institutions (HEIs) across the state, (4) stronger collaborations between HEIs, K-12 schools, government agencies, Non-Governmental Organizations, and STEM businesses, involved in the preparation of preservice STEM teachers, (5) new teacher endorsements in Computer Science and Engineering, and (6) development of a proto-type model for rapid, adaptable, and continuous improvement of STEM teacher preparation programs. A 2015 NGSS gap analysis of teacher preparation programs across Washington State indicates relatively good alignment of courses and curricula with NGSS Disciplinary Core Ideas and Scientific practices, but minimal alignment with NGSS Engineering practices and Cross Cutting Concepts. Likewise, Computer Science and Sustainability ideas and practices are not well represented in current courses and curricula. During the coming year teams of STEM faculty, education faculty and administrators will work collaboratively to develop unique action plans for aligning and improving STEM teacher preparation courses and curricula at their institutions.

Designing computer learning environments for engineering and computer science: The scaffolded knowledge integration framework

NASA Astrophysics Data System (ADS)

Linn, Marcia C.

1995-06-01

Designing effective curricula for complex topics and incorporating technological tools is an evolving process. One important way to foster effective design is to synthesize successful practices. This paper describes a framework called scaffolded knowledge integration and illustrates how it guided the design of two successful course enhancements in the field of computer science and engineering. One course enhancement, the LISP Knowledge Integration Environment, improved learning and resulted in more gender-equitable outcomes. The second course enhancement, the spatial reasoning environment, addressed spatial reasoning in an introductory engineering course. This enhancement minimized the importance of prior knowledge of spatial reasoning and helped students develop a more comprehensive repertoire of spatial reasoning strategies. Taken together, the instructional research programs reinforce the value of the scaffolded knowledge integration framework and suggest directions for future curriculum reformers.

Engineering Faculty Attitudes to General Chemistry Courses in Engineering Curricula

ERIC Educational Resources Information Center

Garip, Mehmet; Erdil, Erzat; Bilsel, Ayhan

2006-01-01

A survey on the attitudes of engineering faculty to chemistry, physics, and mathematics was conducted with the aim of clarifying the attitudes of engineering faculty to chemistry courses in relation to engineering education or curricula and assessing their expectations. The results confirm that on the whole chemistry is perceived as having a…

A Financial Technology Entrepreneurship Program for Computer Science Students

ERIC Educational Resources Information Center

Lawler, James P.; Joseph, Anthony

2011-01-01

Education in entrepreneurship is becoming a critical area of curricula for computer science students. Few schools of computer science have a concentration in entrepreneurship in the computing curricula. The paper presents Technology Entrepreneurship in the curricula at a leading school of computer science and information systems, in which students…

Curriculum: Integrating Health and Safety Into Engineering Curricula.

ERIC Educational Resources Information Center

Talty, John T.

1985-01-01

National Institute for Occupational Safety and Health instituted a project in 1980 to encourage engineering educators to focus on occupational safety and health issues in engineering curricula. Progress to date is outlined, considering specific results in curriculum development, engineering society interaction, and formation of a teaching…

No User Left behind: Including Accessibility in Student Projects and the Impact on CS Students' Attitudes

ERIC Educational Resources Information Center

Poor, G. Michael; Leventhal, Laura M.; Barnes, Julie; Hutchings, Duke R.; Albee, Paul; Campbell, Laura

2012-01-01

Usability and accessibility have become increasingly important in computing curricula. This article briefly reviews how these concepts may be included in existing courses. The authors conducted a survey of student attitudes toward these issues at the start and end of a usability engineering course that included a group project with an…

MASTERS: A Virtual Lab on Multimedia Systems for Telecommunications, Medical, and Remote Sensing Applications

ERIC Educational Resources Information Center

Alexiadis, D. S.; Mitianoudis, N.

2013-01-01

Digital signal processing (DSP) has been an integral part of most electrical, electronic, and computer engineering curricula. The applications of DSP in multimedia (audio, image, video) storage, transmission, and analysis are also widely taught at both the undergraduate and post-graduate levels, as digital multimedia can be encountered in most…

The Impact of Engineering Integrated Science (EIS) Curricula on First-Year Technical High School Students' Attitudes toward Science and Perceptions of Engineering

ERIC Educational Resources Information Center

Nam, Younkyeong; Lee, Sun-Ju; Paik, Seoung-Hey

2016-01-01

This study investigated how engineering integrated science (EIS) curricula affect first-year technical high school students' attitudes toward science and perceptions of engineering. The effect of the EIS participation period on students' attitudes toward science was also investigated via experimental study design. Two engineering integrated…

Effects of Professional Development on Infusing Engineering Design into High School Science, Technology, Engineering, and Math (STEM) Curricula

ERIC Educational Resources Information Center

Avery, Zanj Kano

2010-01-01

The purpose of this study was to examine the effects of professional development (PD) on the infusion of engineering design into high school curricula. Four inservice teachers with backgrounds in physics, chemistry, industrial education, math, and electrical engineering participated in the 2006 National Center of Engineering and Technology…

Integrating Emerging Topics through Online Team Design in a Hybrid Communication Networks Course: Interaction Patterns and Impact of Prior Knowledge

ERIC Educational Resources Information Center

Reisslein, Jana; Seeling, Patrick; Reisslein, Martin

2005-01-01

An important challenge in the introductory communication networks course in electrical and computer engineering curricula is to integrate emerging topics, such as wireless Internet access and network security, into the already content-intensive course. At the same time it is essential to provide students with experiences in online collaboration,…

Learning physical biology via modeling and simulation: A new course and textbook for science and engineering undergraduates

NASA Astrophysics Data System (ADS)

Nelson, Philip

To a large extent, undergraduate physical-science curricula remain firmly rooted in pencil-and-paper calculation, despite the fact that most research is done with computers. To a large extent, undergraduate life-science curricula remain firmly rooted in descriptive approaches, despite the fact that much current research involves quantitative modeling. Not only does our pedagogy not reflect current reality; it also creates a spurious barrier between the fields, reinforcing the narrow silos that prevent students from connecting them. I'll describe an intermediate-level course on ``Physical Models of Living Systems.'' The prerequisite is first-year university physics and calculus. The course is a response to rapidly growing interest among undergraduates in a broad range of science and engineering majors. Students acquire several research skills that are often not addressed in traditional undergraduate courses: •Basic modeling skills; •Probabilistic modeling skills; •Data analysis methods; •Computer programming using a general-purpose platform like MATLAB or Python; •Pulling datasets from the Web for analysis; •Data visualization; •Dynamical systems, particularly feedback control. Partially supported by the NSF under Grants EF-0928048 and DMR-0832802.

Integrating Communication into Engineering Curricula: An Interdisciplinary Approach to Facilitating Transfer at New Mexico Institute of Mining and Technology

ERIC Educational Resources Information Center

Ford, Julie Dyke

2012-01-01

This program profile describes a new approach towards integrating communication within Mechanical Engineering curricula. The author, who holds a joint appointment between Technical Communication and Mechanical Engineering at New Mexico Institute of Mining and Technology, has been collaborating with Mechanical Engineering colleagues to establish a…

A Study of the Programming Languages Used in Information Systems and in Computer Science Curricula

ERIC Educational Resources Information Center

Russell, Jack; Russell, Barbara; Pollacia, Lissa F.; Tastle, William J.

2010-01-01

This paper researches the computer languages taught in the first, second and third programming courses in Computer Information Systems (CIS), Management Information Systems (MIS or IS) curricula as well as in Computer Science (CS) and Information Technology (IT) curricula. Instructors teaching the first course in programming within a four year…

New Principles and Basic Approaches for the Curricula of Engineering Degree Courses.

ERIC Educational Resources Information Center

Gargione, Luiz Antonio

This paper presents new principles and basic approaches for the curricula of engineering degree courses. The accentuated evolution of engineering, the fast technological transformations and, still, the impact provoked by government regulations in the field of education in Brazil have called attention to these issues. Following these changes, it…

Introduction of Life Cycle Assessment and Sustainability Concepts in Chemical Engineering Curricula

ERIC Educational Resources Information Center

Gallego-Schmid, Alejandro; Schmidt Rivera, Ximena C.; Stamford, Laurence

2018-01-01

Purpose: The implementation of life cycle assessment (LCA) and carbon footprinting represents an important professional and research opportunity for chemical engineers, but this is not broadly reflected in chemical engineering curricula worldwide. This paper aims to present the implementation of a coursework that is easy to apply, free of cost,…

Quality assurance and accreditation of engineering education in Jordan

NASA Astrophysics Data System (ADS)

Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

2010-06-01

This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the efforts undertaken by the faculty of engineering at JUST concerning quality assurance and accreditation. Three engineering departments were accorded substantial equivalency status by the Accreditation Board of Engineering and Technology in 2009. Various measures of quality improvement, including curricula development, laboratories improvement, computer facilities, e-learning, and other supporting services are also discussed. Further assessment of the current situation is made through two surveys, targeting engineering instructors and students. Finally, the paper draws conclusions and proposes recommendations to enhance the quality of engineering education at JUST and other Jordanian educational institutions.

Using a Faculty-in-Residence Model to Enhance Curriculae in Computer Science and Social Work with Writing and Critical Thinking

ERIC Educational Resources Information Center

Sarnoff, Susan; Welch, Lonnie; Gradin, Sherrie; Sandell, Karin

2004-01-01

This paper will discuss the results of a project that enabled three faculty members from disparate disciplines: Social Work, Interpersonal Communication and Software Engineering, to enhance writing and critical thinking in their courses. The paper will address the Faculty-in-Residence project model, the activities taken on as a result of it, the…

Constructing Training Demonstrations

DTIC Science & Technology

2009-01-16

evaluates approaches and platforms to be employed for demonstrations, such as film, video , computer-based training, videogames , and simulations [10...environments using 3-D multiplayer gaming technologies. Together these avenues inform our effort to create demonstrations for Army curricula. 1 2 TABLE OF...space of technology platforms with a focus on 3-D game engines. With these two pieces of work in mind, we examine team training applications for

P3: a practice focused learning environment

NASA Astrophysics Data System (ADS)

Irving, Paul W.; Obsniuk, Michael J.; Caballero, Marcos D.

2017-09-01

There has been an increased focus on the integration of practices into physics curricula, with a particular emphasis on integrating computation into the undergraduate curriculum of scientists and engineers. In this paper, we present a university-level, introductory physics course for science and engineering majors at Michigan State University called P3 (projects and practices in physics) that is centred around providing introductory physics students with the opportunity to appropriate various science and engineering practices. The P3 design integrates computation with analytical problem solving and is built upon a curriculum foundation of problem-based learning, the principles of constructive alignment and the theoretical framework of community of practice. The design includes an innovative approach to computational physics instruction, instructional scaffolds, and a unique approach to assessment that enables instructors to guide students in the development of the practices of a physicist. We present the very positive student related outcomes of the design gathered via attitudinal and conceptual inventories and research interviews of students’ reflecting on their experiences in the P3 classroom.

Women Working in Engineering and Science

NASA Technical Reports Server (NTRS)

Luna, Bernadette; Kliss, Mark (Technical Monitor)

1998-01-01

The presentation will focus on topics of interest to young women pursuing an engineering or scientific career, such as intrinsic personality traits of most engineers, average salaries for the various types of engineers, appropriate preparation classes at the high school and undergraduate levels, gaining experience through internships, summer jobs and graduate school, skills necessary but not always included in engineering curricula (i.e., multimedia, computer skills, communication skills), the work environment, balancing family and career, and sexual harassment. Specific examples from the speaker's own experience in NASA's Space Life Sciences Program will be used to illustrate the above topics. In particular, projects from Extravehicular Activity and Protective Systems research and Regenerative Life Support research will be used as examples of real world problem-solving to enable human exploration of the solar system.

A pilot biomedical engineering course in rapid prototyping for mobile health.

PubMed

Stokes, Todd H; Venugopalan, Janani; Hubbard, Elena N; Wang, May D

2013-01-01

Rapid prototyping of medically assistive mobile devices promises to fuel innovation and provides opportunity for hands-on engineering training in biomedical engineering curricula. This paper presents the design and outcomes of a course offered during a 16-week semester in Fall 2011 with 11 students enrolled. The syllabus covered a mobile health design process from end-to-end, including storyboarding, non-functional prototypes, integrated circuit programming, 3D modeling, 3D printing, cloud computing database programming, and developing patient engagement through animated videos describing the benefits of a new device. Most technologies presented in this class are open source and thus provide unlimited "hackability". They are also cost-effective and easily transferrable to other departments.

Engagement in Science and Engineering through Animal-Based Curricula

ERIC Educational Resources Information Center

Mueller, Megan Kiely; Byrnes, Elizabeth M.; Buczek, Danielle; Linder, Deborah E.; Freeman, Lisa M.; Webster, Cynthia R. L.

2018-01-01

One of the persistent challenges in science, technology, engineering, and math (STEM) education is increasing interest, learning, and retention, particularly with regard to girls and students in underserved areas. Educational curricula that promote process and content knowledge development as well as interest and engagement in STEM are critical in…

Practical skills of the future innovator

NASA Astrophysics Data System (ADS)

Kaurov, Vitaliy

2015-03-01

Physics graduates face and often are disoriented by the complex and turbulent world of startups, incubators, emergent technologies, big data, social network engineering, and so on. In order to build the curricula that foster the skills necessary to navigate this world, we will look at the experiences at the Wolfram Science Summer School that gathers annually international students for already more than a decade. We will look at the examples of projects and see the development of such skills as innovative thinking, data mining, machine learning, cloud technologies, device connectivity and the Internet of things, network analytics, geo-information systems, formalized computable knowledge, and the adjacent applied research skills from graph theory to image processing and beyond. This should give solid ideas to educators who will build standard curricula adapted for innovation and entrepreneurship education.

On Analysis of Electrical Engineering Programme in GCC Countries

ERIC Educational Resources Information Center

Memon, Qurban A.

2007-01-01

Electrical engineering (EE) curricula in the Gulf Cooperation Council (GCC) region have gone through an evolutionary process, and are now approaching a maturity level. In order to address academic and local industrial needs in a unified way, a need has been felt to investigate EE curricula in a way that highlights theoretical understanding, design…

Introduction of Sustainable Development in Engineers' Curricula: Problematic and Evaluation Methods

ERIC Educational Resources Information Center

Lourdel, N.; Gondran, N.; Laforest, V.; Brodhag, C.

2005-01-01

Purpose: Owing to its complexity, sustainable development cannot be simply integrated as a supplementary course within the engineers' curricula. The first point of this paper aims to focalise on how to reflect pedagogically. After dealing with these questions, a tool that can evaluate the student's understanding of sustainable development concepts…

Curriculum optimization of College of Optical Science and Engineering

NASA Astrophysics Data System (ADS)

Wang, Xiaoping; Zheng, Zhenrong; Wang, Kaiwei; Zheng, Xiaodong; Ye, Song; Zhu, Yuhui

2017-08-01

The optimized curriculum of College of Optical Science and Engineering is accomplished at Zhejiang University, based on new trends from both research and industry. The curriculum includes general courses, foundation courses such as mathematics and physics, major core courses, laboratory courses and several module courses. Module courses include optical system designing, optical telecommunication, imaging and vision, electronics and computer science, optoelectronic sensing and metrology, optical mechanics and materials, basics and extension. These curricula reflect the direction of latest researches and relates closely with optoelectronics. Therefore, students may combine flexibly compulsory courses with elective courses, and establish the personalized curriculum of "optoelectronics + X", according to their individual strengths and preferences.

An Exploration of the Effectiveness of Product Archeology in an Undergraduate Engineering Curriculum: What Can a Five-Hour Curriculum Do?

ERIC Educational Resources Information Center

Okudan Kremer, Gül E.; Simpson, Timothy W.; Ashour, Omar M.

2013-01-01

In this paper, we present our efforts in embedding product archeology inspired curricula into two engineering courses along with assessment results. The assessment focuses on the effectiveness of the embedded curricula in enhancing students' understanding on the global, societal, environmental, and economic (GSEE) implications of engineering…

Development of a Pedagogical Model to Help Engineering Faculty Design Interdisciplinary Curricula

ERIC Educational Resources Information Center

Navarro, Maria; Foutz, Timothy; Thompson, Sidney; Singer, Kerri Patrick

2016-01-01

The purpose of this study was to develop a model to help engineering faculty overcome the challenges they face when asked to design and implement interdisciplinary curricula. Researchers at a U.S. University worked with an Interdisciplinary Consultant Team and prepared a steering document with Guiding Principles and Essential Elements for the…

Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

ERIC Educational Resources Information Center

Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

2011-01-01

This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

Comparative Study of the academic performance between different curricula in Agricultural Engineering

NASA Astrophysics Data System (ADS)

Vazquez, J. L.; Serrano, A.; Caniego, J.

2012-04-01

Due to the introduction of new degrees on the College of Agricultural Engineering of the Technical University of Madrid adapted to the European Space for Higher Education (Bologna), we have made a comparative study of academic achievement obtained by the students during their first year at the Centre according to different curricula. We used data from 2 curricula leading to the degree in Agricultural Engineering, Curriculumn 74 (6 years and annual structure) and Curriculum 96 modified in 2006 (5 years with quarterly structure) and the new curriculum in grades (4 years semi-structured). It has been used as a data source, the qualifications of new students during the last three years prior to the extinction of the curriculum.The study shows that current rates of academic success or failure and dropout during the first year of college are very similar to those happening 12 years ago, when it was assumed that the preparation of students from high school was much higher than today. Keywords: Academic performance, curricula, Bologna.

Vertical stream curricula integration of problem-based learning using an autonomous vacuum robot in a mechatronics course

NASA Astrophysics Data System (ADS)

Chin, Cheng; Yue, Keng

2011-10-01

Difficulties in teaching a multi-disciplinary subject such as the mechatronics system design module in Departments of Mechatronics Engineering at Temasek Polytechnic arise from the gap in experience and skill among staff and students who have different backgrounds in mechanical, computer and electrical engineering within the Mechatronics Department. The departments piloted a new vertical stream curricula model (VSCAM) to enhance student learning in mechatronics system design through integration of educational activities from the first to the second year of the course. In this case study, a problem-based learning (PBL) method on an autonomous vacuum robot in the mechatronics systems design module was proposed to allow the students to have hands-on experience in the mechatronics system design. The proposed works included in PBL consist of seminar sessions, weekly works and project presentation to provide holistic assessment on teamwork and individual contributions. At the end of VSCAM, an integrative evaluation was conducted using confidence logs, attitude surveys and questionnaires. It was found that the activities were quite appreciated by the participating staff and students. Hence, PBL has served as an effective pedagogical framework for teaching multidisciplinary subjects in mechatronics engineering education if adequate guidance and support are given to staff and students.

Integrating Computational Chemistry into a Course in Classical Thermodynamics

ERIC Educational Resources Information Center

Martini, Sheridan R.; Hartzell, Cynthia J.

2015-01-01

Computational chemistry is commonly addressed in the quantum mechanics course of undergraduate physical chemistry curricula. Since quantum mechanics traditionally follows the thermodynamics course, there is a lack of curricula relating computational chemistry to thermodynamics. A method integrating molecular modeling software into a semester long…

Quantitative Evaluation of Flexibility in Undergraduate Engineering Curricula in the United Arab Emirates

ERIC Educational Resources Information Center

Darwish, Naif A.; Qasim, Muhammad

2016-01-01

In academia, smooth progression of students significantly depends on the way curricula are developed and organized. Curricula or study plans with high degree of interconnectivity between courses, multiple prerequisites, and hierarchically structured courses tend to complicate the smooth progress of the enrolled students. In this work, a rigorous…

Issues for Universities Working with K-12 Institutions Implementing Prepackaged Pre-Engineering Curricula Such as Project Lead the Way

ERIC Educational Resources Information Center

Reid, Kenneth J.; Feldhaus, Charles R.

2007-01-01

The implementation of pre-engineering, standard curricula in K-12 schools is growing at a rapid pace. One such curriculum model, Project Lead the Way, consists of six standardized courses requiring significant training for teachers, specified laboratory equipment, standard topics, exams, etc. Schools implementing Project Lead the Way implement an…

Curriculum planning for the development of graphicacy capability: three case studies from Europe and the USA

NASA Astrophysics Data System (ADS)

Danos, Xenia; Barr, Ronald; Górska, Renata; Norman, Eddie

2014-11-01

Curriculum planning for the development of graphicacy capability has not been systematically included in general education to coincide with the graphicacy needs of human society. In higher education, graphicacy curricula have been developed to meet the needs of certain disciplines, for example medical and teacher training and engineering, among others. A framework for graphicacy curricula, anticipating the graphicacy needs in higher education, has yet to be strategically planned for general education. This is partly a result of lack of research effort in this area, but also a result of lack of systematic curriculum planning in general. This paper discusses these issues in the context of graphicacy curricula for engineering. The paper presents three broad individual case studies spanning Europe and the USA, brought together by the common denominator, graphicacy. The case studies are based on: an analysis of graphicacy within general education curricula, an analysis of graphicacy for engineering education in Europe and an analysis of graphicacy for engineering education in the USA. These three papers were originally presented in a plenary session at the American Society for Engineering Education, Engineering Design Graphics Division at the University of Limerick in November 2012. The case studies demonstrate the potential for strategic curriculum planning in regard to the development of graphicacy in general education and an overview of a methodology to achieve that. It also offers further evidence towards the importance of the systematic classification of graphics capabilities in Engineering and how the lack of a developed theoretical framework in this area undermines the case for the importance of graphics within engineering education.

A Review of Computer Science Resources for Learning and Teaching with K-12 Computing Curricula: An Australian Case Study

ERIC Educational Resources Information Center

Falkner, Katrina; Vivian, Rebecca

2015-01-01

To support teachers to implement Computer Science curricula into classrooms from the very first year of school, teachers, schools and organisations seek quality curriculum resources to support implementation and teacher professional development. Until now, many Computer Science resources and outreach initiatives have targeted K-12 school-age…

News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers

NASA Astrophysics Data System (ADS)

Anton, J. M.; Sanchez, M. E.; Grau, J. B.; Andina, D.

2012-04-01

The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, "project of end of career", Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.

Introducing Cloud Computing Topics in Curricula

ERIC Educational Resources Information Center

Chen, Ling; Liu, Yang; Gallagher, Marcus; Pailthorpe, Bernard; Sadiq, Shazia; Shen, Heng Tao; Li, Xue

2012-01-01

The demand for graduates with exposure in Cloud Computing is on the rise. For many educational institutions, the challenge is to decide on how to incorporate appropriate cloud-based technologies into their curricula. In this paper, we describe our design and experiences of integrating Cloud Computing components into seven third/fourth-year…

Entrepreneurial Health Informatics for Computer Science and Information Systems Students

ERIC Educational Resources Information Center

Lawler, James; Joseph, Anthony; Narula, Stuti

2014-01-01

Corporate entrepreneurship is a critical area of curricula for computer science and information systems students. Few institutions of computer science and information systems have entrepreneurship in the curricula however. This paper presents entrepreneurial health informatics as a course in a concentration of Technology Entrepreneurship at a…

Assessment of Competencies for Computer Information Systems Curricula.

ERIC Educational Resources Information Center

Womble, Myra N.

1993-01-01

In a survey of 80 managerial and 130 entry-level computer professionals, most entry workers believed they possessed competencies identified in Association for Computing Machinery (ACM) curricula; most managers did not agree. Most managers rated 28% of ACM competencies moderately to not important; 63% were so rated by entry workers. (SK)

Confronting the Issues of Programming in Information Systems Curricula: The Goal Is Success

ERIC Educational Resources Information Center

Babb, Jeffry; Longenecker, Herbert E., Jr.; Baugh, Jeanne; Feinstein, David

2014-01-01

Computer programming has been part of Information Systems (IS) curricula since the first model curriculum. It is with programming that computers are instructed how to implement our ideas into reality. Yet, over the last decade numbers of computing undergraduates have significantly declined in North American academic programs. In addition, high…

Survival Mode: The Stresses and Strains of Computing Curricula Review

ERIC Educational Resources Information Center

Tan, Grace; Venables, Anne

2008-01-01

In an ideal world, review and changes to computing curricula should be driven solely by academic concerns for the needs of students. The process should be informed by industry accreditation processes and international best practice (Hurst et al., 2001). However, Australian computing curricular review is often driven by the need for financial…

Contributions of Cognitive Science and Related Research on Learning to the Design of Computer Literacy Curricula. Report No. 81-1. Series in Learning and Cognition.

ERIC Educational Resources Information Center

Mayer, Richard E.

A review of the research on techniques for increasing the novice's understanding of computers and computer programming, this paper considers the potential usefulness of five tentative recommendations pertinent to the design of computer literacy curricula: (1) provide the learner with a concrete model of the computer; (2) encourage the learner to…

BENCHMARKING SUSTAINABILITY ENGINEERING EDUCATION

EPA Science Inventory

The goals of this project are to develop and apply a methodology for benchmarking curricula in sustainability engineering and to identify individuals active in sustainability engineering education.

Computer aided system engineering for space construction

NASA Technical Reports Server (NTRS)

Racheli, Ugo

1989-01-01

This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

Biology: An Important Agricultural Engineering Mechanism

ERIC Educational Resources Information Center

Henderson, S. M.

1974-01-01

Describes the field of bioengineering with particular emphasis on agricultural engineering, and presents the results of a survey of schools that combine biology and engineering in their curricula. (JR)

Forming engineers' sociocultural competence: Engineering ethics at tomsk polytechnic university

NASA Astrophysics Data System (ADS)

Galanina, E.; Dulzon, A.; Schwab, A.

2015-10-01

The aim of the present research is to discuss Tomsk Polytechnic University in respect of forming engineers’ sociocultural competence and teaching engineering ethics. Today international standards of training engineers cover efficient communication skills, ability to understand societal and environment context, professional and ethical responsibility. This article deals with the problem of contradiction between the need to form engineers’ sociocultural competence in Russian higher education institutions in order to meet the requirements of international accreditation organizations and the real capabilities of existing engineering curricula. We have described ethics teaching experience of TPU, studied the engineering master programs of TPU to see how the planned results are achieved. We have also given our recommendations to alter the structure of TPU educational curricula, which can also be applied in other higher education institutions.

Develop railway engineering modules in UTK civil engineering undergraduate and graduate courses.

DOT National Transportation Integrated Search

2015-05-31

The importance of railway transport has long been recognized. However, no railway : engineering courses have been provided in the UTK civil engineering curricula. The : objective of this education project is to develop some railway engineering module...

Science and Engineering

ERIC Educational Resources Information Center

Cowin, Roy; Reyes-Guerra, David

1977-01-01

Engineers may be involved in various functions such as research, development, planning, design (analysis and synthesis), construction, operation and management of engineering projects. This article discusses some branches of accredited engineering curricula, employment opportunities, the preparation for management, minimum education needed, women…

Biomedical learning experiences for middle school girls sponsored by the Kansas State University Student Chapter of the IEEE EMBS.

PubMed

Gruber, Lucinda; Griffith, Connor; Young, Ethan; Sullivan, Adriann; Schuler, Jeff; Arnold-Christian, Susan; Warren, Steve

2009-01-01

Learning experiences for middle school girls are an effective means to steer young women toward secondary engineering curricula that they might not have otherwise considered. Sponsorship of such experiences by a collegiate student group is worthwhile, as it gives the group common purpose and places college students in a position to mentor these young women. This paper addresses learning experiences in different areas of bio-medical engineering offered to middle school girls in November 2008 via a day-long workshop entitled "Engineering The Body." The Kansas State University (KSU) Student Chapter of the IEEE Engineering in Medicine and Biology Society (EMBS) worked with the KSU Women in Engineering and Science Program (WESP) to design and sponsor these experiences, which addressed the areas of joint mechanics, electrocardiograms, membrane transport, computer mouse design, and audio filters for cochlear implants. Fifty five middle-school girls participated in this event, affirming the notion that biomedical engineering appeals to young women and that early education and recruitment efforts have the potential to expand the biomedical engineering talent pool.

Advanced Algebra and Calculus. High School Mathematics Curricula. Instructor's Guide.

ERIC Educational Resources Information Center

Natour, Denise M.

This manual is an instructor's guide for the utilization of the "CCA High School Mathematics Curricula: Advanced Algebra and Calculus" courseware developed by the Computer-based Education Research Laboratory (CERL). The curriculum comprises 34 algebra lessons within 12 units and 15 calculus lessons that are computer-based and require…

Engineering Encounters: Engineering Adaptations

ERIC Educational Resources Information Center

Gatling, Anne; Vaughn, Meredith Houle

2015-01-01

Engineering is not a subject that has historically been taught in elementary schools, but with the emphasis on engineering in the "Next Generation Science Standards," curricula are being developed to explicitly teach engineering content and design. However, many of the scientific investigations already conducted with students have…

Developing an industry-oriented safety curriculum using the Delphi technique.

PubMed

Chen, Der-Fa; Wu, Tsung-Chih; Chen, Chi-Hsiang; Chang, Shu-Hsuan; Yao, Kai-Chao; Liao, Chin-Wen

2016-09-01

In this study, we examined the development of industry-oriented safety degree curricula at a college level. Based on a review of literature on the practices and study of the development of safety curricula, we classified occupational safety and health curricula into the following three domains: safety engineering, health engineering, and safety and health management. We invited 44 safety professionals to complete a four-round survey that was designed using a modified Delphi technique. We used Chi-square statistics to test the panel experts' consensus on the significance of the items in the three domains and employed descriptive statistics to rank the participants' rating of each item. The results showed that the top three items for each of the three domains were Risk Assessment, Dangerous Machinery and Equipment, and Fire and Explosion Prevention for safety engineering; Ergonomics, Industrial Toxicology, and Health Risk Assessment for health engineering; and Industrial Safety and Health Regulations, Accident Investigation and Analysis, and Emergency Response for safety and health management. Only graduates from safety programmes who possess practical industry-oriented abilities can satisfy industry demands and provide value to the existence of college safety programmes.

Pedagogical Engineering in Intercultural Terms: Critical Success Factors.

ERIC Educational Resources Information Center

Evans, Daniel S.; Vergnaud, Stephanie

1998-01-01

Outlines the elements necessary for successful development and implementation of cross-cultural curricula and related international exchange, drawing on field experience in creating a new international graduate curricula in management. International course development is a resource-intensive activity that must take into consideration the cultural…

Standardized Curriculum for Diesel Engine Mechanics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: diesel engine mechanics I and II. The eight units in diesel engine mechanics I are as follows: orientation; shop safety; basic shop tools; fasteners; measurement; engine operating principles; engine components; and basic auxiliary…

Embedding Multiple Literacies into STEM Curricula

ERIC Educational Resources Information Center

Soules, Aline; Nielsen, Sarah; LeDuc, Danika; Inouye, Caron; Singley, Jason; Wildy, Erica; Seitz, Jeff

2014-01-01

In fall 2012, an interdisciplinary team of science, English, and library faculty embedded reading, writing, and information literacy strategies in Science, Technology, Engineering, and Mathematics (STEM) curricula as a first step in improving student learning and retention in science courses and aligning them with the Next Generation Science and…

Social, Economic, and Political Change: Portents for Reform in Engineering Curricula.

ERIC Educational Resources Information Center

Wenk, Edward, Jr.

1988-01-01

Discusses the needs and properties of human systems including issues of safety and the holistic approach in engineering. Lists a suggested introductory engineering curriculum. Describes characteristics of future realities in managing technology. (YP)

A Model for the Development of University Curricula in Nanoelectronics

ERIC Educational Resources Information Center

Bruun, E.; Nielsen, I.

2010-01-01

Nanotechnology is having an increasing impact on university curricula in electrical engineering and in physics. Major influencers affecting developments in university programmes related to nanoelectronics are discussed and a model for university programme development is described. The model takes into account that nanotechnology affects not only…

Computers in Curricula Program for Networked College Level Writing Process Instruction: A First Year Report.

ERIC Educational Resources Information Center

Balajthy, Ernest

The first section of this report lists a variety of advantages and disadvantages of educational applications of Local Area Networks (LANs), with descriptive and evaluative comments on how the Union County Computers in the Curricula Network Project (Cranford, New Jersey) dealt with each. The second section of the report describes the following…

Defining, Developing and Assessing Global Competence in Engineers

ERIC Educational Resources Information Center

Lohmann, Jack R.; Rollins, Howard A.; Hoey, J. Joseph

2006-01-01

Engineering curricula are increasingly focused on developing student competencies. Many new competencies needed by engineers today are professional skills (sometimes called the "soft skills"). Among the new competencies for engineering graduates is global competence, the ability to work knowledgeably and live comfortably in a…

An Online Graduate Requirements Engineering Course

ERIC Educational Resources Information Center

Kilicay-Ergin, N.; Laplante, P. A.

2013-01-01

Requirements engineering is one of the fundamental knowledge areas in software and systems engineering graduate curricula. Recent changes in educational delivery and student demographics have created new challenges for requirements engineering education. In particular, there is an increasing demand for online education for working professionals.…

An integrated approach to engineering curricula improvement with multi-objective decision modeling and linear programming

NASA Astrophysics Data System (ADS)

Shea, John E.

The structure of engineering curricula currently in place at most colleges and universities has existed since the early 1950's, and reflects an historical emphasis on a solid foundation in math, science, and engineering science. However, there is often not a close match between elements of the traditional engineering education, and the skill sets that graduates need to possess for success in the industrial environment. Considerable progress has been made to restructure engineering courses and curricula. What is lacking, however, are tools and methodologies that incorporate the many dimensions of college courses, and how they are structured to form a curriculum. If curriculum changes are to be made, the first objective must be to determine what knowledge and skills engineering graduates need to possess. To accomplish this, a set of engineering competencies was developed from existing literature, and used in the development of a comprehensive mail survey of alumni, employers, students and faculty. Respondents proposed some changes to the topics in the curriculum and recommended that work to improve the curriculum be focused on communication, problem solving and people skills. The process of designing a curriculum is similar to engineering design, with requirements that must be met, and objectives that must be optimized. From this similarity came the idea for developing a linear, additive, multi-objective model that identifies the objectives that must be considered when designing a curriculum, and contains the mathematical relationships necessary to quantify the value of a specific alternative. The model incorporates the three primary objectives of engineering topics, skills, and curriculum design principles and uses data from the survey. It was used to design new courses, to evaluate various curricula alternatives, and to conduct sensitivity analysis to better understand their differences. Using the multi-objective model to identify the highest scoring curriculum from a catalog of courses is difficult because of the many factors being considered. To assist this process, the multi-objective model and the curriculum requirements were incorporated in a linear program to select the "optimum" curriculum. The application of this tool was also beneficial in identifying the active constraints that limit curriculum development and content.

Adapting bioinformatics curricula for big data.

PubMed

Greene, Anna C; Giffin, Kristine A; Greene, Casey S; Moore, Jason H

2016-01-01

Modern technologies are capable of generating enormous amounts of data that measure complex biological systems. Computational biologists and bioinformatics scientists are increasingly being asked to use these data to reveal key systems-level properties. We review the extent to which curricula are changing in the era of big data. We identify key competencies that scientists dealing with big data are expected to possess across fields, and we use this information to propose courses to meet these growing needs. While bioinformatics programs have traditionally trained students in data-intensive science, we identify areas of particular biological, computational and statistical emphasis important for this era that can be incorporated into existing curricula. For each area, we propose a course structured around these topics, which can be adapted in whole or in parts into existing curricula. In summary, specific challenges associated with big data provide an important opportunity to update existing curricula, but we do not foresee a wholesale redesign of bioinformatics training programs. © The Author 2015. Published by Oxford University Press.

Adapting bioinformatics curricula for big data

PubMed Central

Greene, Anna C.; Giffin, Kristine A.; Greene, Casey S.

2016-01-01

Modern technologies are capable of generating enormous amounts of data that measure complex biological systems. Computational biologists and bioinformatics scientists are increasingly being asked to use these data to reveal key systems-level properties. We review the extent to which curricula are changing in the era of big data. We identify key competencies that scientists dealing with big data are expected to possess across fields, and we use this information to propose courses to meet these growing needs. While bioinformatics programs have traditionally trained students in data-intensive science, we identify areas of particular biological, computational and statistical emphasis important for this era that can be incorporated into existing curricula. For each area, we propose a course structured around these topics, which can be adapted in whole or in parts into existing curricula. In summary, specific challenges associated with big data provide an important opportunity to update existing curricula, but we do not foresee a wholesale redesign of bioinformatics training programs. PMID:25829469

Engineering Graphics in Education: Programming and Ready Programs.

ERIC Educational Resources Information Center

Audi, M. S.

1987-01-01

Suggests a method of integrating teaching microcomputer graphics in engineering curricula without encroaching on the fundamental engineering courses. Includes examples of engineering graphics produced by commercial programs and others produced by high-level language programing in a limited credit hour segment of an educational program. (CW)

Educational NASA Computational and Scientific Studies (enCOMPASS)

NASA Technical Reports Server (NTRS)

Memarsadeghi, Nargess

2013-01-01

Educational NASA Computational and Scientific Studies (enCOMPASS) is an educational project of NASA Goddard Space Flight Center aimed at bridging the gap between computational objectives and needs of NASA's scientific research, missions, and projects, and academia's latest advances in applied mathematics and computer science. enCOMPASS achieves this goal via bidirectional collaboration and communication between NASA and academia. Using developed NASA Computational Case Studies in university computer science/engineering and applied mathematics classes is a way of addressing NASA's goals of contributing to the Science, Technology, Education, and Math (STEM) National Objective. The enCOMPASS Web site at http://encompass.gsfc.nasa.gov provides additional information. There are currently nine enCOMPASS case studies developed in areas of earth sciences, planetary sciences, and astrophysics. Some of these case studies have been published in AIP and IEEE's Computing in Science and Engineering magazines. A few university professors have used enCOMPASS case studies in their computational classes and contributed their findings to NASA scientists. In these case studies, after introducing the science area, the specific problem, and related NASA missions, students are first asked to solve a known problem using NASA data and past approaches used and often published in a scientific/research paper. Then, after learning about the NASA application and related computational tools and approaches for solving the proposed problem, students are given a harder problem as a challenge for them to research and develop solutions for. This project provides a model for NASA scientists and engineers on one side, and university students, faculty, and researchers in computer science and applied mathematics on the other side, to learn from each other's areas of work, computational needs and solutions, and the latest advances in research and development. This innovation takes NASA science and engineering applications to computer science and applied mathematics university classes, and makes NASA objectives part of the university curricula. There is great potential for growth and return on investment of this program to the point where every major university in the U.S. would use at least one of these case studies in one of their computational courses, and where every NASA scientist and engineer facing a computational challenge (without having resources or expertise to solve it) would use enCOMPASS to formulate the problem as a case study, provide it to a university, and get back their solutions and ideas.

Computer-assisted instruction in curricula of physical therapist assistants.

PubMed

Thompson, E C

1987-08-01

This article compares the effectiveness of computer-assisted instruction (CAI) with written, programmed instruction between two groups of physical therapist assistant students. No significant difference in the amount of material learned or retained after completion of testing using either CAI or a written, programmed text was found in this group of 16 subjects. Learning style or attitude about computers did not correlate strongly with performance after the CAI. Findings suggest that more research is needed to support decisions related to fiscal allotments for computer use in college curricula.

First Year Engineering Graphics Curricula in Major Engineering Colleges.

ERIC Educational Resources Information Center

Meyers, Frederick D.

2000-01-01

Investigates the commonalities and differences of graphics programs among nine universities in the United States by analyzing the course structure and reviewing attendance and course syllabi. (Author/YDS)

Practical Pedagogy for Embedding ESD in Science, Technology, Engineering and Mathematics Curricula

ERIC Educational Resources Information Center

Hopkinson, Peter; James, Peter

2010-01-01

Purpose--The purpose of this paper is to review and highlight some recent examples of embedding education for sustainable development (ESD), within science and related curricula in ways that are meaningful and relevant to staff and students and reflect on different embedding strategies and discourses. Design/methodology/approach--A review of…

High performance computing and communications: Advancing the frontiers of information technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

This report, which supplements the President`s Fiscal Year 1997 Budget, describes the interagency High Performance Computing and Communications (HPCC) Program. The HPCC Program will celebrate its fifth anniversary in October 1996 with an impressive array of accomplishments to its credit. Over its five-year history, the HPCC Program has focused on developing high performance computing and communications technologies that can be applied to computation-intensive applications. Major highlights for FY 1996: (1) High performance computing systems enable practical solutions to complex problems with accuracies not possible five years ago; (2) HPCC-funded research in very large scale networking techniques has been instrumental inmore » the evolution of the Internet, which continues exponential growth in size, speed, and availability of information; (3) The combination of hardware capability measured in gigaflop/s, networking technology measured in gigabit/s, and new computational science techniques for modeling phenomena has demonstrated that very large scale accurate scientific calculations can be executed across heterogeneous parallel processing systems located thousands of miles apart; (4) Federal investments in HPCC software R and D support researchers who pioneered the development of parallel languages and compilers, high performance mathematical, engineering, and scientific libraries, and software tools--technologies that allow scientists to use powerful parallel systems to focus on Federal agency mission applications; and (5) HPCC support for virtual environments has enabled the development of immersive technologies, where researchers can explore and manipulate multi-dimensional scientific and engineering problems. Educational programs fostered by the HPCC Program have brought into classrooms new science and engineering curricula designed to teach computational science. This document contains a small sample of the significant HPCC Program accomplishments in FY 1996.« less

Iteration in Early-Elementary Engineering Design

ERIC Educational Resources Information Center

McFarland Kendall, Amber Leigh

2017-01-01

K-12 standards and curricula are beginning to include engineering design as a key practice within Science Technology Engineering and Mathematics (STEM) education. However, there is little research on how the youngest students engage in engineering design within the elementary classroom. This dissertation focuses on iteration as an essential aspect…

Trends in U.S. Engineering and Engineering Technology: A Comparative Study of Admissions, Curricula, and Employment.

ERIC Educational Resources Information Center

Lebold, W. K.; Lebold, D. J.

1985-01-01

Discusses the admissions selection practices, educational programs, quality standards, and employment characteristics of engineering and engineering technology in the United States. The importance of these two occupations as part of technical teams (which include scientists and technicians) is documented and stressed. (JN)

Investigating Engineering Practice Is Valuable for Mathematics Learning

ERIC Educational Resources Information Center

Goold, Eileen

2015-01-01

While engineering mathematics curricula often prescribe a fixed body of mathematical knowledge, this study takes a different approach; second-year engineering students are additionally required to investigate and document an aspect of mathematics used in engineering practice. A qualitative approach is used to evaluate the impact that students'…

Graduate Engineering Education Today

ERIC Educational Resources Information Center

Pettit, Joseph M.; Gere, James M.

1969-01-01

Describes rapid growth of graduate education in engineering between 1900 and 1969. Points out need for graduate curricula in engineering that are both practical and research-oriented. Adapted from paper presented at International Conference on the Trends in the Teaching and Training of Engineers, Paris, France, December 9-13, 1968, and at Second…

Micro Computer Technician Course. Course Design, Course Curricula, Learning Units, Resource Requirements. InfoTVE 14.

ERIC Educational Resources Information Center

Royal Melbourne Inst. of Tech. (Australia).

This guide to the core curricula for the training of microcomputer technicians is designed for school leavers after 10 or more years of general/vocational education with a science and mathematics background. The 2-year course is to be administered in four semesters. An introductory outline of course design and curricula provides the rationale,…

Biological Engineering: A New Discipline for the Next Century.

ERIC Educational Resources Information Center

Tao, Bernard Y.

1993-01-01

Reviews the issues driving the need for a biological engineering discipline and summarizes current curricula at several universities. The Purdue Biochemical and Food Processing Engineering program is presented as a model for the implementation of curriculum objectives. (23 references) (Author/MCO)

Education for Professional Engineering Practice

ERIC Educational Resources Information Center

Bramhall, Mike D.; Short, Chris

2014-01-01

This paper reports on a funded collaborative large-scale curriculum innovation and enhancement project undertaken as part of a UK National Higher Education Science, Technology Engineering and Mathematics (STEM) programme. Its aim was to develop undergraduate curricula to teach appropriate skills for professional engineering practice more…

Computer Science in K-12 School Curricula of the 2lst Century: Why, What and When?

ERIC Educational Resources Information Center

Webb, Mary; Davis, Niki; Bell, Tim; Katz, Yaacov J.; Reynolds, Nicholas; Chambers, Dianne P.; Syslo, Maciej M.

2017-01-01

In this paper we have examined the position and roles of Computer Science in curricula in the light of recent calls for curriculum change and we have proposed principles and issues to consider in curriculum design as well as identifying priority areas for further research. The paper is based on discussions within and beyond the International…

Designing for Success: Developing Engineers Who Consider Universal Design Principles

ERIC Educational Resources Information Center

Bigelow, Kimberly Edginton

2012-01-01

Engineers must design for a diverse group of potential users of their products; however, engineering curricula rarely include an emphasis on universal design principles. This research article details the effectiveness of a design project implemented in a first-year engineering course in an effort to raise awareness of the need for engineers to be…

Developing and Applying Quantitative Skills Maps for STEM Curricula, with a Focus on Different Modes of Learning

ERIC Educational Resources Information Center

Reid, Jackie; Wilkes, Janelle

2016-01-01

Mapping quantitative skills across the science, technology, engineering and mathematics (STEM) curricula will help educators identify gaps and duplication in the teaching, practice and assessment of the necessary skills. This paper describes the development and implementation of quantitative skills mapping tools for courses in STEM at a regional…

Engineering Education at a New Public University in Brazil: First Students' Contact with Engineering Methods

ERIC Educational Resources Information Center

Romero, Jesus Franklin A.; Leite, Patricia; Mantovani, Gerson L.; Lanfredi, Alexandre J. C.; Martins-Filho, Luiz S.

2011-01-01

This paper describes the experience of an introductory discipline to the engineering curricula at the Brazilian Federal University of ABC (UFABC). The university offers a common basic curriculum that must be accomplished by every student and can be followed by professionalising courses. The discipline "Introduction to Engineering"…

Building an Evaluation Strategy for an Integrated Curriculum in Chemical Engineering

ERIC Educational Resources Information Center

McCarthy, Joseph J.; Parker, Robert S.; Abatan, Adetola; Besterfield-Sacre, Mary

2011-01-01

Increasing knowledge integration has gained wide-spread support as an important goal in engineering education. The Chemical Engineering Pillars curriculum at the University of Pittsburgh, unique for its use of block scheduling, is one of the first four-year, integrated curricula in engineering, and is specifically designed to facilitate knowledge…

Assessment of Knowledge and Skills Needed in Selected Engineering Technician Fields: Mechanical/Manufacturing/Industrial.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

A study identified the essential educational topics and the level of proficiency perceived to be required in these topics for selected two-year engineering technology programs in North Carolina. The four curricula studied were mechanical engineering technology, mechanical drafting and design technology, manufacturing engineering technology, and…

Chemical Engineering Curricula for the Future: Synopsis of Proceedings of a U.S.-India Conference, January, 1988.

ERIC Educational Resources Information Center

Ramkrishna, D.; And Others

1989-01-01

This is a summary of a seminar for changing the undergraduate chemical engineering curriculum in India. Identifies and describes biotechnology, materials for structural and microelectronic catalysis, and new separation processes as emerging areas. Evaluates the current curriculum, including basic science, engineering lore, chemical engineering,…

Enriching Science and Math through Engineering

ERIC Educational Resources Information Center

Redmond, Adrienne; Thomas, Julie; High, Karen; Scott, Margaret; Jordan, Pat; Dockers, Jean

2011-01-01

This case study reviewed the collaborative efforts of university engineers, teacher educators, and middle school teachers to advance sixth- and seventh-grade students' learning through a series of project-based engineering activities. This two-year project enriched regular school curricula by introducing real-world applications of science and…

Assessing Changes in Teachers' Attitudes toward Interdisciplinary STEM Teaching

ERIC Educational Resources Information Center

Al Salami, Mubarak K.; Makela, Carole J.; de Miranda, Michael A.

2017-01-01

Integrating engineering and technology concepts into K-12 science and math curricula through engineering design project-based learning has been found to increase students' interest in science, technology, engineering, and mathematics (STEM), however preparing teachers to shift to interdisciplinary teaching remains a significant challenge.…

Mineral Engineering Education in the West.

ERIC Educational Resources Information Center

Borgmann, Carl W.; Bartram, John W.

A large percentage of all US degrees in mineral engineering fields are awarded by 14 institutions of higher education in 13 western states: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming. But low undergraduate enrollments in the mineral engineering curricula have increased…

Embedding Context in Teaching Engineering Design

ERIC Educational Resources Information Center

Neumeyer, Xaver; Chen, Wei; McKenna, Ann F.

2013-01-01

Understanding the global, societal, environmental and economic (GSEE) context of a product, process or system is critical to an engineer's ability to design and innovate. The already packed curricula in engineering programs provide few occasions to offer meaningful experiences to address this issue, and most departments delegate this requirement…

What To Do, Instead of Counterproductive, Standardized Curricula and Testing.

ERIC Educational Resources Information Center

Keegan, Mark

1993-01-01

Presents evidence against the use of standardized curricula and testing and in favor of discovery-based instruction. Describes a successful experience with a relatively new form of discovery-based instruction, the scenario educational computer software. (AEF)

A case study for retaining nuclear power experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckjord, E.S.

1996-12-31

Nuclear engineering departments at U.S. universities are rethinking curricula to focus on essentials. Prospective engineers must know nuclear engineering disciplines, but knowing how their engineering forebears solved important problems will empower them even more by learning some history along with engineering. I suggest a way to retain experience, giving an example: the emergency core cooling system (ECCS) controversy and resolution.

The Impact of Design-Based STEM Integration Curricula on Student Achievement in Engineering, Science, and Mathematics

ERIC Educational Resources Information Center

Selcen Guzey, S.; Harwell, Michael; Moreno, Mario; Peralta, Yadira; Moore, Tamara J.

2017-01-01

The new science education reform documents call for integration of engineering into K-12 science classes. Engineering design and practices are new to most science teachers, meaning that implementing effective engineering instruction is likely to be challenging. This quasi-experimental study explored the influence of teacher-developed, engineering…

Introducing Optical Concepts in Electrical Engineering.

ERIC Educational Resources Information Center

Daneshvar, K.; Coleman, R.

The expansion in the fields of optical engineering and optoelectronics has made it essential to introduce optical engineering concepts into undergraduate courses and curricula. Because of limits on the number of course requirements for the BS degree, it is not clear how these topics should be introduced without replacing some of the traditional…

Shaking up Pre-Calculus: Incorporating Engineering into K-12 Curricula

ERIC Educational Resources Information Center

Sabo, Chelsea; Burrows, Andrea; Childers, Lois

2014-01-01

Projects highlighting Science, Technology, Engineering, and Mathematics (STEM) education in high schools have promoted student interest in engineering-related fields and enhanced student understanding of mathematics and science concepts. The Science and Technology Enhancement Program (Project STEP), funded by a NSF GK-12 grant at the University of…

Choosing STEM College Majors: Exploring the Role of Pre-College Engineering Courses

ERIC Educational Resources Information Center

Phelps, L. Allen; Camburn, Eric M.; Min, Sookweon

2018-01-01

Despite the recent policy proclamations urging state and local educators to implement integrated science, technology, engineering, and mathematics (STEM) curricula, relatively little is known about the role and impact of pre-college engineering courses within these initiatives. When combined with appropriate mathematics and science courses, high…

Integrating Innovation Skills in an Introductory Engineering Design-Build Course

ERIC Educational Resources Information Center

Liebenberg, Leon; Mathews, Edward Henry

2012-01-01

Modern engineering curricula have started to emphasize design, mostly in the form of design-build experiences. Apart from instilling important problem-solving skills, such pedagogical frameworks address the critical social skill aspects of engineering education due to their team-based, project-based nature. However, it is required of the…

Roadmapping towards Sustainability Proficiency in Engineering Education

ERIC Educational Resources Information Center

Rodriguez-Andara, Alejandro; Río-Belver, Rosa María; Rodríguez-Salvador, Marisela; Lezama-Nicolás, René

2018-01-01

Purpose: The purpose of this paper is to deliver a roadmap that displays pathways to develop sustainability skills in the engineering curricula. Design/methodology/approach: The selected approach to enrich engineering students with sustainability skills was active learning methodologies. First, a survey was carried out on a sample of 189 students…

Appropriate Programs for Foreign Students in U.S. Chemical Engineering Curricula.

ERIC Educational Resources Information Center

Findley, M. E.

Chemical engineers in developing countries may need abilities in a number of diverse areas including management, planning, chemistry, equipment, processes, politics, and improvisation. Chemical engineering programs for foreign students can be arranged by informed advisers with student input for inclusion of some of these areas in addition to…

Conceptual and Procedural Approaches to Mathematics in the Engineering Curriculum--Comparing Views of Junior and Senior Engineering Students in Two Countries

ERIC Educational Resources Information Center

Bergsten, Christer; Engelbrecht, Johann; Kågesten, Owe

2017-01-01

One challenge for an optimal design of the mathematical components in engineering education curricula is to understand how the procedural and conceptual dimensions of mathematical work can be matched with different demands and contexts from the education and practice of engineers. The focus in this paper is on how engineering students respond to…

Addressing the United States Navy Need for Software Engineering Education

DTIC Science & Technology

1999-09-01

taught in MA 1996 (5 - 0). Precalculus review, complex numbers and algebra, complex plane, DeMovire’s Theorem, matrix algebra, LU decomposition...This course was designed for the METOC and Combat Systems curricula. PREREQUISITE: Precalculus mathematics. MA1996 MATHEMATICS FOR SCIENTISTS AND...description for MAI995 (5 - 0). This course was designed for the METOC and Combat Systems curricula. PREREQUISITE: Precalculus mathematics. PHYSICS/SYSTEMS

Examining the Extent to Which Select Teacher Preparation Experiences Inform Technology and Engineering Educators' Teaching of Science Content and Practices

ERIC Educational Resources Information Center

Love, Tyler S.

2015-01-01

With the recent release of the "Next Generation Science Standards" (NGSS) (NGSS Lead States, 2014b) science educators were expected to teach engineering content and practices within their curricula. However, technology and engineering (T&E) educators have been expected to teach content and practices from engineering and other…

Engineering Ethics at the Catholic University of Lille (France): Research and Teaching in a European Context.

ERIC Educational Resources Information Center

Didier, Christelle

2000-01-01

Discusses the development of non-technical education and ethics in engineering curricula in Europe and particularly in France. Investigates two projects at the Catholic University of Lille. The first project is an engineering ethics course and the second has to do with writing a European handbook on engineering ethics as a discipline. (Contains 28…

An Australian Study of Generic Competencies Required by Engineers

ERIC Educational Resources Information Center

Male, S. A.; Bush, M. B.; Chapman, E. S.

2011-01-01

Engineering curricula have expanded in recent decades. In addition to science and technical engineering, they now include several non-technical competencies. This is a trend reinforced by programme accreditation. The authors take the viewpoint that it is important to ensure that graduates have the competencies they will require for their work. The…

Sustainability and Ethics as Decision-Making Paradigms in Engineering Curricula

ERIC Educational Resources Information Center

El-Zein, Abbas; Airey, David; Bowden, Peter; Clarkeburn, Henriikka

2008-01-01

Purpose: The aim of this paper is to explore the rationale for teaching sustainability and engineering ethics within a decision-making paradigm, and critically appraise ways of achieving related learning outcomes. Design/methodology/approach: The paper presents the experience of the School of Civil Engineering at the University of Sydney in…

Towards a Controlled Vocabulary on Software Engineering Education

ERIC Educational Resources Information Center

Pizard, Sebastián; Vallespir, Diego

2017-01-01

Software engineering is the discipline that develops all the aspects of the production of software. Although there are guidelines about what topics to include in a software engineering curricula, it is usually unclear which are the best methods to teach them. In any science discipline the construction of a classification schema is a common…

Recycling as an Exercise in Engineering Education.

ERIC Educational Resources Information Center

Bosscher, James P.

Based on the premise that there are major changes occurring in the programs and/or curricula in engineering schools of today, the author suggests that to focus on the potential of recycling as a natural vehicle would powerfully implement some of the trends in sight in an inventive engineering educational enterprise. His suggestions are given in…

A short course on measure and probability theories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pebay, Philippe Pierre

2004-02-01

This brief Introduction to Measure Theory, and its applications to Probabilities, corresponds to the lecture notes of a seminar series given at Sandia National Laboratories in Livermore, during the spring of 2003. The goal of these seminars was to provide a minimal background to Computational Combustion scientists interested in using more advanced stochastic concepts and methods, e.g., in the context of uncertainty quantification. Indeed, most mechanical engineering curricula do not provide students with formal training in the field of probability, and even in less in measure theory. However, stochastic methods have been used more and more extensively in the pastmore » decade, and have provided more successful computational tools. Scientists at the Combustion Research Facility of Sandia National Laboratories have been using computational stochastic methods for years. Addressing more and more complex applications, and facing difficult problems that arose in applications showed the need for a better understanding of theoretical foundations. This is why the seminar series was launched, and these notes summarize most of the concepts which have been discussed. The goal of the seminars was to bring a group of mechanical engineers and computational combustion scientists to a full understanding of N. WIENER'S polynomial chaos theory. Therefore, these lectures notes are built along those lines, and are not intended to be exhaustive. In particular, the author welcomes any comments or criticisms.« less

Chemists, Engineers Probe Mutual Problems.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1980

1980-01-01

Summarizes recommendations made in a workshop sponsored by the American Chemical Society concerning issues involving the diverging viewpoints of chemistry and chemical engineering. Includes recommendations regarding curricula, salary differences, and the need to change attitudes of chemistry faculty toward industry and industrial chemistry. (CS)

Gaming, texting, learning? Teaching engineering ethics through students' lived experiences with technology.

PubMed

Voss, Georgina

2013-09-01

This paper examines how young peoples' lived experiences with personal technologies can be used to teach engineering ethics in a way which facilitates greater engagement with the subject. Engineering ethics can be challenging to teach: as a form of practical ethics, it is framed around future workplace experience in a professional setting which students are assumed to have no prior experience of. Yet the current generations of engineering students, who have been described as 'digital natives', do however have immersive personal experience with digital technologies; and experiential learning theory describes how students learn ethics more successfully when they can draw on personal experience which give context and meaning to abstract theories. This paper reviews current teaching practices in engineering ethics; and examines young people's engagement with technologies including cell phones, social networking sites, digital music and computer games to identify social and ethical elements of these practices which have relevance for the engineering ethics curricula. From this analysis three case studies are developed to illustrate how facets of the use of these technologies can be drawn on to teach topics including group work and communication; risk and safety; and engineering as social experimentation. Means for bridging personal experience and professional ethics when teaching these cases are discussed. The paper contributes to research and curriculum development in engineering ethics education, and to wider education research about methods of teaching 'the net generation'.

Mississippi Curriculum Framework for Small Engine Repair (Program CIP: 47.0606--Small Engine Mechanic and Repairer). Secondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for small engine repair I and II. Presented first are a program description…

Technological Innovation and Technical Communications: Their Place in Aerospace Engineering Curricula. A Survey of European, Japanese and US Aerospace Engineers and Scientists.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

1991-01-01

Reports on results from 260 aerospace engineers and scientists in United States, Europe, and Japan regarding their opinions about professional importance of technical communications; generation and utilization of technical communications; and relevant content of an undergraduate course in technical communications. The fields of cryogenics,…

Engaging Engineering and Information Systems Students in Advocacy for Individuals with Disabilities through a Disability Film Media Project

ERIC Educational Resources Information Center

Lawler, James; Iturralde, Val; Goldstein, Allan; Joseph, Anthony

2015-01-01

College curricula of engineering and information systems do not afford frequent engagement with individuals with disabilities. The authors of this research study analyzed the benefits of disability films for a community film festival of largely engineering and information systems students and individuals with developmental and intellectual…

Developing and Teaching a Two-Credit Data Management Course for Graduate Students in Climate and Space Sciences

ERIC Educational Resources Information Center

Thielen, Joanna; Samuel, Sara M.; Carlson, Jake; Moldwin, Mark

2017-01-01

Engineering researchers face increasing pressure to manage, share, and preserve their data, but these subjects are not typically a part of the curricula of engineering graduate programs. To address this situation, librarians at the University of Michigan, in partnership with the Climate and Space Sciences and Engineering Department, developed a…

Consequences of Team Charter Quality: Teamwork Mental Model Similarity and Team Viability in Engineering Design Student Teams

ERIC Educational Resources Information Center

Conway Hughston, Veronica

2014-01-01

Since 1996 ABET has mandated that undergraduate engineering degree granting institutions focus on learning outcomes such as professional skills (i.e. solving unstructured problems and working in teams). As a result, engineering curricula were restructured to include team based learning--including team charters. Team charters were diffused into…

Development of Microcomputer Simulations for Vocational/Technical Education. Final Report.

ERIC Educational Resources Information Center

Randolph Technical Coll., Asheboro, NC.

A project investigated the feasibility of developing equipment simulations in vocational curricula using videotapes and microcomputers. To conduct the research, two pieces of equipment that could be used in vocational curricula throughout the North Carolina Community College System were chosen: (1) computer numerical control (CNC) lathe used in…

Traditional engineering in the biological century: the biotraditional engineer.

PubMed

Friedman, M H

2001-12-01

The increasing importance of life science in all engineering is prompting departments in the traditional engineering disciplines to offer life science as part of their curricula. Students who take advantage of this opportunity--"biotraditional engineers"--will be well positioned for careers in their discipline and in related areas of bioengineering. The founder engineering societies, such as the Bioengineering Division of ASME, are responding to this trend by broadening their scope and working increasingly across interdisciplinary borders.

Optical Design and Engineering: Lessons Learned

NASA Technical Reports Server (NTRS)

Mouroulis, Pantazis

2005-01-01

This paper contains some recommendations for the optics curricula that seek to serve students intent on a career in optical engineering, as well as suggestions for the young professional embarking on such a career. It also illustrates the suggestions with some examples of actual optical systems.

Engineering Technology Programs. Preliminary Curriculum Planning Guide.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Developed as a resource to assist in a major revision underway in Georgia area technical schools to change curricula for preparing engineering technicians, this preliminary program-planning guide describes curriculum structures for specialized programs in three major areas--electronics, electromechanics, and mechanics. The handbook, which is…

An Exploratory Study to Analyze New Skill Content in Selected Occupations in Michigan and the Mechanism for its Translation into Vocational Education Curricula: Section Report on Automobile Engine Mechanics.

ERIC Educational Resources Information Center

Battelle Memorial Inst., Columbus, OH. Columbus Labs.

The report is one of a series which supplements the overall report "Exploratory Study to Analyze New Skill Content in Selected Occupations in Michigan and the Mechanism for its Translation into Vocational Education Curricula". The present report presents detailed task analyses and results of employers skill requirements for auto mechanics. The…

A Methodology for Improving Active Learning Engineering Courses with a Large Number of Students and Teachers through Feedback Gathering and Iterative Refinement

ERIC Educational Resources Information Center

Estévez-Ayres, Iria; Alario-Hoyos, Carlos; Pérez-Sanagustín, Mar; Pardo, Abelardo; Crespo-García, Raquel M.; Leony, Derick; Parada G., Hugo A.; Delgado-Kloos, Carlos

2015-01-01

In the last decade, engineering education has evolved in many ways to meet society demands. Universities offer more flexible curricula and put a lot of effort on the acquisition of professional engineering skills by the students. In many universities, the courses in the first years of different engineering degrees share program and objectives,…

SENSE IT: Student Enabled Network of Sensors for the Environment using Innovative Technology

NASA Astrophysics Data System (ADS)

Hotaling, L. A.; Stolkin, R.; Kirkey, W.; Bonner, J. S.; Lowes, S.; Lin, P.; Ojo, T.

2010-12-01

SENSE IT is a project funded by the National Science Foundation (NSF) which strives to enrich science, technology, engineering and mathematics (STEM) education by providing teacher professional development and classroom projects in which high school students build from first principles, program, test and deploy sensors for water quality monitoring. Sensor development is a broad and interdisciplinary area, providing motivating scenarios in which to teach a multitude of STEM subjects, from mathematics and physics to biology and environmental science, while engaging students with hands on problems that reinforce conventional classroom learning by re-presenting theory as practical tools for building real-life working devices. The SENSE IT program is currently developing and implementing a set of high school educational modules which teach environmental science and basic engineering through the lens of fundamental STEM principles, at the same time introducing students to a new set of technologies that are increasingly important in the world of environmental research. Specifically, the project provides students with the opportunity to learn the engineering design process through the design, construction, programming and testing of a student-implemented water monitoring network in the Hudson and St. Lawrence Rivers in New York. These educational modules are aligned to state and national technology and science content standards and are designed to be compatible with standard classroom curricula to support a variety of core science, technology and mathematics classroom material. For example, while designing, programming and calibrating the sensors, the students are led through a series of tasks in which they must use core mathematics and physics theory to solve the real problems of making their sensors work. In later modules, students can explore environmental science and environmental engineering curricula while deploying and monitoring their sensors in local rivers. This presentation will provide an overview of the educational modules. A variety of sensors will be described, which are suitably simple for design and construction from first principles by high school students while being accurate enough for students to make meaningful environmental measurements. The presentation will also describe how the sensor building activities can be tied to core curricula classroom theory, enabling the modules to be utilized in regular classes by mathematics, science and computing teachers without disrupting their semester’s teaching goals. Furthermore, the presentation will address of the first two years of the SENSE IT project, during which 39 teachers have been equipped, trained on these materials, and have implemented the modules with around approximately 2,000 high school students.

Faculty perspectives on the inclusion of work-related learning in engineering curricula

NASA Astrophysics Data System (ADS)

Magnell, Marie; Geschwind, Lars; Kolmos, Anette

2017-11-01

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that faculty see as important if the amount of work-related learning is to increase. The results show that faculty members are positive about integrating work-related issues into the curriculum. Programmes with more extensive connections to industry offer more integrated activities, such as projects with external actors, and use professional contacts established through research in their teaching. In order to increase work-related learning in engineering curricula, faculty request clear goals and pedagogical tools. Other options to increase work-related learning include offering faculty the opportunity to work outside academia.

Introduction of interdisciplinary teaching: two case studies : commentary on "teaching science, technology, and society to engineering students: a sixteen year journey".

PubMed

Spitzer, Hartwig

2013-12-01

Interdisciplinary courses on science, engineering and society have been successfully established in two cases, at Bilkent University, Ankara, Turkey, and at the University of Hamburg, Germany. In both cases there were institutional and perceptual barriers that had to be overcome in the primarily disciplinary departments. The ingredients of success included a clear vision of interdisciplinary themes and didactics, and the exploitation of institutional opportunities. Haldun M. Ozaktas in Ankara used the dynamics of an accreditation process to establish courses on engineering and society. At the University of Hamburg the introduction of optional courses into all curricula allowed for the establishment of a seminar series on physics and society, as well as on peace education and peace building. Both of these approaches have a weakness in common: the courses can disappear once their initiators have left, unless the interdisciplinary themes are integrated into compulsory core curricula.

Engineering a Cure: Treena Livingston Arinzeh

ERIC Educational Resources Information Center

Lum, Lydia

2005-01-01

This article provides an overview of the accomplishments of Assistant Professor of Biomedical Engineering at the New Jersey Institute of Technology, Treena Livingston Arinzeh. It describes her exemplary work on stem cell research; her educational roots; and her work helping develop undergraduate and graduate curricula for the fledgling biomedical…

Linear Programming across the Curriculum

ERIC Educational Resources Information Center

Yoder, S. Elizabeth; Kurz, M. Elizabeth

2015-01-01

Linear programming (LP) is taught in different departments across college campuses with engineering and management curricula. Modeling an LP problem is taught in every linear programming class. As faculty teaching in Engineering and Management departments, the depth to which teachers should expect students to master this particular type of…

Use of Technology Solutions to Improve CAD Instruction

ERIC Educational Resources Information Center

Ault, Holly K.; Fraser, Alister

2012-01-01

Engineering Graphics curricula have changed dramatically in the past three decades. In the past, students in nearly all engineering disciplines were instructed in manual drafting and descriptive geometry. Students spent many hours "on the board", and this training enhanced the students' graphics communication, design and visualization…

Teaching Old Dogs New Tricks: The Luxury of Digital Abundance

ERIC Educational Resources Information Center

O'Brien, David; Scharber, Cassandra

2010-01-01

Today we thrive on an abundance of relatively cheap computing power and have the luxury of wasting most of it. It is quickly becoming not only possible but also financially sound, for educators to significantly complement, supplement, or even replace traditional print curricula with digital print and media, online curricula and websites, and…

Meeting Report: Incorporating Genomics Research into Undergraduate Curricula

ERIC Educational Resources Information Center

Dyer, Betsey Dexter; LeBlanc, Mark D.

2002-01-01

In the first of two National Science Foundation (NSF)-funded workshops, 30 professors of biology and computer science from 18 institutions met at Wheaton College in Norton, Massachusetts, on June 6-7, 2002, to share ideas on how to incorporate genomics research into undergraduate curricula. The participants included nine pairs or trios of…

Increasing the Roles and Significance of Teachers in Policymaking for K-12 Engineering Education: Proceedings of a Convocation

ERIC Educational Resources Information Center

Olson, Steve

2017-01-01

Engineering is a small but growing part of K-12 education. Curricula that use the principles and practices of engineering are providing opportunities for elementary, middle, and high school students to design solutions to problems of immediate practical and societal importance. Professional development programs are showing teachers how to use…

Professional Socialization of Electrical Engineers in University Education

ERIC Educational Resources Information Center

Keltikangas, Kirsti; Martinsuo, Miia

2009-01-01

University educators constantly seek ways in which courses and curricula would promote students' professional development in line with the needs of industries. The purpose of this study was to develop a framework for analysing professional socialization particularly in the context of electrical engineering education and explore factors associated…

Rationale for Incorporating Health and Safety into the Curriculum.

ERIC Educational Resources Information Center

Fleischman, Marvin

1988-01-01

Presents a philosophical commentary on the need and rationale for incorporating safety and health into the chemical engineering curriculum. Proposes safety and health assessments as useful teaching methods. Describes an approach to bringing safety and health into undergraduate engineering curricula. Gives examples of integration of these curricula…

Using Role-Playing Games to Broaden Engineering Education

ERIC Educational Resources Information Center

McConville, Jennifer R.; Rauch, Sebastien; Helgegren, Ida; Kain, Jaan-Henrik

2017-01-01

Purpose: In today's complex society, there is an increasing demand to include a wider set of skills in engineering curricula, especially skills related to policy, society and sustainable development. Role-playing and gaming are active learning tools, which are useful for learning relationships between technology and society, problem solving in…

FHWA and USGS cooperate to provide environmental engineering/science curricula developed for the stochastic empirical loading and dilution model (SELDM) to universities and colleges.

DOT National Transportation Integrated Search

2016-01-01

Managers and engineers at the Federal Highway Administration (FHWA) and State Departments of Transportation (DOTs) indicate that they need researchers, employees, consultants, and regulators who understand the unique challenges involved in managing a...

Artistic Ways of Knowing in Gifted Education: Encouraging Every Student to Think Like an Artist

ERIC Educational Resources Information Center

Haroutounian, Joanne

2017-01-01

After decades of fluctuating presence in gifted education, the arts are surprisingly establishing themselves in academic classrooms, spurred by arts integration with science, technology, engineering, and mathematics (STEM) curricula or science, technology, engineering, art, and mathematics (STEAM). This renewed interest provides the opportunity to…

Postgraduate Programmes on Environmental Water Resources Engineering and Management in Greek Universities

ERIC Educational Resources Information Center

Latinopoulos, Pericles; Angelidis, Panagiotis

2014-01-01

The management of complex water problems is nowadays being practised through new ways and approaches. Therefore, water engineers, planners and managers should be appropriately educated through modern undergraduate curricula and by well-designed postgraduate specialisation programmes. Within this framework, a study of the specific characteristics…

The Need for Plastics Education.

ERIC Educational Resources Information Center

Society of Plastics Engineers, Inc., Stamford, CT.

In view of a lack of trained personnel in the industry, the Plastics Education Foundation proposes that educators (1) add more plastics programs, (2) establish plastics engineering degrees at appropriate 4-year institutions, (3) add plastics processing technology to current engineering curricula, and (4) interest younger students in courses and/or…

Preparing Engineers for Social Responsibility

ERIC Educational Resources Information Center

Zandvoort, H.

2008-01-01

In this paper I introduce the contributions to a special section of the journal: one devoted to the question of how engineering curricula can or should contribute to the preparation of graduates for socially responsible decision making and conduct. The special section is motivated by the circumstance that, although there is broad agreement that…

Multidisciplinary Design and Analysis for Commercial Aircraft

NASA Technical Reports Server (NTRS)

Cummings, Russell M.; Freeman, H. JoAnne

1999-01-01

Multidisciplinary design and analysis (MDA) has become the normal mode of operation within most aerospace companies, but the impact of these changes have largely not been reflected at many universities. On an effort to determine if the emergence of multidisciplinary design concepts should influence engineering curricula, NASA has asked several universities (Virginia Tech, Georgia Tech, Clemson, BYU, and Cal Poly) to investigate the practicality of introducing MDA concepts within their undergraduate curricula. A multidisciplinary team of faculty, students, and industry partners evaluated the aeronautical engineering curriculum at Cal Poly. A variety of ways were found to introduce MDA themes into the curriculum without adding courses or units to the existing program. Both analytic and educational tools for multidisciplinary design of aircraft have been developed and implemented.

Connect Computer Education to Policies.

ERIC Educational Resources Information Center

Kimmelman, Paul

1985-01-01

The computer phenomenon has made rapid inroads into school curricula, often without proper board guidance or approval. Accordingly, this pamphlet discusses why and how computer education should be provided in schools and sets forth guidelines for school board policy regarding computers. An umbrella policy is proposed, defining "computer literacy"…

Know Your Discipline: Teaching the Philosophy of Computer Science

ERIC Educational Resources Information Center

Tedre, Matti

2007-01-01

The diversity and interdisciplinarity of computer science and the multiplicity of its uses in other sciences make it hard to define computer science and to prescribe how computer science should be carried out. The diversity of computer science also causes friction between computer scientists from different branches. Computer science curricula, as…

Learning Biology through Innovative Curricula: A Comparison of Game- and Nongame-Based Approaches

ERIC Educational Resources Information Center

Sadler, Troy D.; Romine, William L.; Menon, Deepika; Ferdig, Richard E.; Annetta, Leonard

2015-01-01

This study explored student learning in the context of innovative biotechnology curricula and the effects of gaming as a central element of the learning experience. The quasi-experimentally designed study compared learning outcomes between two curricular approaches: One built around a computer-based game, and the other built around a narrative…

A Comparison of Computer-Assisted Instruction and Field-Based Learning for Youth Rangeland Education

ERIC Educational Resources Information Center

Peterson, Jennifer; Launchbaugh, Karen; Pickering, Michael; Hollenhorst, Steven

2006-01-01

Field-based learning experiences are often used to increase the effectiveness of science curricula. However, time and financial limitations in public schools often hinder a teacher's ability to bring their students into the field for learning, despite increased demands to incorporate more science content into their curricula. In addition, federal…

Bioinformatics in Middle East Program Curricula--A Focus on the Arabian Gulf

ERIC Educational Resources Information Center

Loucif, Samia

2014-01-01

The purpose of this paper is to investigate the inclusion of bioinformatics in program curricula in the Middle East, focusing on educational institutions in the Arabian Gulf. Bioinformatics is a multidisciplinary field which has emerged in response to the need for efficient data storage and retrieval, and accurate and fast computational and…

Integrating Computer Content into Social Work Curricula: A Model for Planning

ERIC Educational Resources Information Center

Beaulaurier, Richard L.

2005-01-01

While recent CSWE standards focus on the need for including more relevant technological content in social work curricula, they do not offer guidance regarding how it is to be assessed and selected. Social work educators are in need of an analytic model of computerization to help them understand which technologies are most appropriate and relevant…

Frances: A Tool for Understanding Computer Architecture and Assembly Language

ERIC Educational Resources Information Center

Sondag, Tyler; Pokorny, Kian L.; Rajan, Hridesh

2012-01-01

Students in all areas of computing require knowledge of the computing device including software implementation at the machine level. Several courses in computer science curricula address these low-level details such as computer architecture and assembly languages. For such courses, there are advantages to studying real architectures instead of…

Computers in the Schools: State/Provincial Implications.

ERIC Educational Resources Information Center

Thiessen, S. J.

The Alberta goverment has attempted to systematically address educational computing issues through programs of the provincial (K-12) education department (Alberta Education), which have included the development of computer literacy curricula for elementary, junior, and senior high schools; the Computer Technology Project (CTP); evaluation studies;…

Iteration in Early-Elementary Engineering Design

NASA Astrophysics Data System (ADS)

McFarland Kendall, Amber Leigh

K-12 standards and curricula are beginning to include engineering design as a key practice within Science Technology Engineering and Mathematics (STEM) education. However, there is little research on how the youngest students engage in engineering design within the elementary classroom. This dissertation focuses on iteration as an essential aspect of engineering design, and because research at the college and professional level suggests iteration improves the designer's understanding of problems and the quality of design solutions. My research presents qualitative case studies of students in kindergarten and third-grade as they engage in classroom engineering design challenges which integrate with traditional curricula standards in mathematics, science, and literature. I discuss my results through the lens of activity theory, emphasizing practices, goals, and mediating resources. Through three chapters, I provide insight into how early-elementary students iterate upon their designs by characterizing the ways in which lesson design impacts testing and revision, by analyzing the plan-driven and experimentation-driven approaches that student groups use when solving engineering design challenges, and by investigating how students attend to constraints within the challenge. I connect these findings to teacher practices and curriculum design in order to suggest methods of promoting iteration within open-ended, classroom-based engineering design challenges. This dissertation contributes to the field of engineering education by providing evidence of productive engineering practices in young students and support for the value of engineering design challenges in developing students' participation and agency in these practices.

An information technology emphasis in biomedical informatics education.

PubMed

Kane, Michael D; Brewer, Jeffrey L

2007-02-01

Unprecedented growth in the interdisciplinary domain of biomedical informatics reflects the recent advancements in genomic sequence availability, high-content biotechnology screening systems, as well as the expectations of computational biology to command a leading role in drug discovery and disease characterization. These forces have moved much of life sciences research almost completely into the computational domain. Importantly, educational training in biomedical informatics has been limited to students enrolled in the life sciences curricula, yet much of the skills needed to succeed in biomedical informatics involve or augment training in information technology curricula. This manuscript describes the methods and rationale for training students enrolled in information technology curricula in the field of biomedical informatics, which augments the existing information technology curriculum and provides training on specific subjects in Biomedical Informatics not emphasized in bioinformatics courses offered in life science programs, and does not require prerequisite courses in the life sciences.

Team-Based Development of Medical Devices: An Engineering-Business Collaborative.

PubMed

Eberhardt, Alan W; Johnson, Ophelia L; Kirkland, William B; Dobbs, Joel H; Moradi, Lee G

2016-07-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a "virtual company," with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement.

SEED: A Suite of Instructional Laboratories for Computer Security Education

ERIC Educational Resources Information Center

Du, Wenliang; Wang, Ronghua

2008-01-01

The security and assurance of our computing infrastructure has become a national priority. To address this priority, higher education has gradually incorporated the principles of computer and information security into the mainstream undergraduate and graduate computer science curricula. To achieve effective education, learning security principles…

Computer-Based Education in the Social Studies.

ERIC Educational Resources Information Center

Ehman, Lee H.; Glenn, Allen D.

Computers have not revolutionized social studies curricula because so few teachers use them. But research does indicate that computers are flexible instructional tools that can assist in the development of attitudes, intellectual motivation, and inquiry skills. Social studies educators need to consider expanded computer use in their classrooms…

Toward Epistemologically Authentic Engineering Design Activities in the Science Classroom

ERIC Educational Resources Information Center

Leonard, Mary J.

2004-01-01

In recent years educators and educational researchers in the U.S. have begun to introduce engineering design activities in secondary science classrooms for the purpose of scaffolding science learning as well as supporting such general problem-solving skills as decision making and working in teams. However, such curricula risk perpetuating a…

Preventive Maintenance Study: A Key Component in Engineering Education to Enhance Industrial Productivity and Competitiveness.

ERIC Educational Resources Information Center

Nachlas, Joel A.; Cassady, C. Richard

1999-01-01

Suggests that a chief contributor to the continued economic success of the western economies will be the productivity gains available through efficient preventative maintenance planning and argues for appropriate changes in engineering curricula. Describes the formulation of maintenance planning problems and illustrates with numerical examples the…

Case Study: Use of Problem-Based Learning to Develop Students' Technical and Professional Skills

ERIC Educational Resources Information Center

Warnock, James N.; Mohammadi-Aragh, M. Jean

2016-01-01

Problem-based learning (PBL) is a pedagogy that has attracted attention for many biomedical engineering curricula. The aim of the current study was to address the research question, "Does PBL enable students to develop desirable professional engineering skills?" The desirable skills identified were communication, teamwork, problem…

Developing Interactive Educational Engineering Software for the World Wide Web with Java.

ERIC Educational Resources Information Center

Reed, John A.; Afjeh, Abdollah A.

1998-01-01

Illustrates the design and implementation of a Java applet for use in educational propulsion engineering curricula. The Java Gas Turbine Simulator applet provides an interactive graphical environment which allows the rapid, efficient construction and analysis of arbitrary gas turbine systems. The simulator can be easily accessed from the World…

Common Elements of Capstone Projects in the World's Top-Ranked Engineering Universities

ERIC Educational Resources Information Center

Ward, Thomas A.

2013-01-01

"Capstone" is a metaphor used to describe a final achievement that builds upon previous works and encapsulates them. Capstone projects are included in engineering curricula to integrate multi-disciplinary subjects and teach professional skills that are difficult to impart in a traditional lectured course. Since these projects serve to…

Comparing Traditional versus Alternative Sequencing of Instruction When Using Simulation Modeling

ERIC Educational Resources Information Center

Bowen, Bradley; DeLuca, William

2015-01-01

Many engineering and technology education classrooms incorporate simulation modeling as part of curricula to teach engineering and STEM-based concepts. The traditional method of the learning process has students first learn the content from the classroom teacher and then may have the opportunity to apply the learned content through simulation…

Improving Student Interest in Engineering Curricula--Exciting Students about Their Classes

ERIC Educational Resources Information Center

Khalid, Adeel

2013-01-01

In this paper, we explore what events, activities, and teaching styles invoke student interest in engineering courses. The research is based on inputs from some of the best and award winning faculty members across disciplines. The activities that professors use to keep students engaged are highlighted. Similarly, the actions that professors take…

Instructional Strategies to Promote Student Strategic Thinking When Using SolidWorks

ERIC Educational Resources Information Center

Toto, Roxanne; Colledge, Thomas; Frederick, David; Pung, Wik Hung

2014-01-01

Reflective of current trends in industry, engineering design professionals are expected to have knowledge of 3D modeling software. Responding to this need, engineering curricula seek to effectively prepare students for the workforce by requiring instruction in the use of 3D parametric solid modeling. Recent literature contains many examples that…

Integrating the Engineering Curriculum through the Synthesis and Design Studio

ERIC Educational Resources Information Center

Kellam, Nadia; Walther, Joachim; Costantino, Tracie; Cramond, Bonnie

2013-01-01

Traditional curricular approaches within engineering education tend to be fragmented, with opportunities for content- and meta-level synthesis being mostly limited to freshman and senior year design courses. In this paper, we are proposing a curricular model, the Synthesis and Design Studio, to combat the tendency towards fragmented curricula. The…

Design of a Professional Practice Simulator for Educating and Motivating First-Year Engineering Students

ERIC Educational Resources Information Center

Chesler, Naomi C.; Arastoopour, Golnaz; D'Angelo, Cynthia M.; Bagley, Elizabeth A.; Shaffer, David Williamson

2013-01-01

Increasingly, first-year engineering curricula incorporate design projects. However, the faculty and staff effort and physical resources required for the number of students enrolled can be daunting and affect the quality of instruction. To reduce these costs, ensure a high quality educational experience, and reduce variability in student outcomes…

Where Are We Now? Statistics on Capstone Courses Nationwide

ERIC Educational Resources Information Center

Howe, Susannah

2010-01-01

Capstone design courses are an increasingly common component of engineering curricula nationwide, but how much do we really know about the current practices? How do capstone courses differ across departments and institutions? How have capstone courses changed in the past 10 years? This paper highlights data from a survey of engineering capstone…

Fundamentals of Composite Materials for Undergraduate Engineering--A Filmed Presentation. Final Report.

ERIC Educational Resources Information Center

Busching, Herbert W.

Curricula in undergraduate engineering have not adequately reflected present usage and knowledge of composite materials (types of rock and organic matter in which structurally dissimilar materials are combined). Wide usage of composites is expected to increase the importance of this class of materials and the need for more substantive exposure to…

The Design and Development of a Computerized Tool Support for Conducting Senior Projects in Software Engineering Education

ERIC Educational Resources Information Center

Chen, Chung-Yang; Teng, Kao-Chiuan

2011-01-01

This paper presents a computerized tool support, the Meetings-Flow Project Collaboration System (MFS), for designing, directing and sustaining the collaborative teamwork required in senior projects in software engineering (SE) education. Among many schools' SE curricula, senior projects serve as a capstone course that provides comprehensive…

Design and Implementation of an Interdepartmental Biotechnology Program across Engineering Technology Curricula

ERIC Educational Resources Information Center

Clase, Kari

2008-01-01

The health industry is an important and growing economic engine. Advances are being made in pharmaceutical and biotechnology discoveries and their applications (including manufacturing), as well as in health care services. As a result, there is an increasing sophistication of the products and services available and being developed, with an…

Bioinformatics Education in High School: Implications for Promoting Science, Technology, Engineering, and Mathematics Careers

ERIC Educational Resources Information Center

Kovarik, Dina N.; Patterson, Davis G.; Cohen, Carolyn; Sanders, Elizabeth A.; Peterson, Karen A.; Porter, Sandra G.; Chowning, Jeanne Ting

2013-01-01

We investigated the effects of our Bio-ITEST teacher professional development model and bioinformatics curricula on cognitive traits (awareness, engagement, self-efficacy, and relevance) in high school teachers and students that are known to accompany a developing interest in science, technology, engineering, and mathematics (STEM) careers. The…

Design and Development of a Cross-Cultural Disposition Inventory

ERIC Educational Resources Information Center

Davies, Randall; Zaugg, Holt; Tateishi, Isaku

2015-01-01

Advances in technology have increased the likelihood that engineers will have to work in a global, culturally diverse setting. Many schools of engineering are currently revising their curricula to help students to develop cultural competence. However, our ability to measure cultural dispositions can be a challenge. The purpose of this project was…

Explicating mathematical thinking in differential equations using a computer algebra system

NASA Astrophysics Data System (ADS)

Zeynivandnezhad, Fereshteh; Bates, Rachel

2018-07-01

The importance of developing students' mathematical thinking is frequently highlighted in literature regarding the teaching and learning of mathematics. Despite this importance, most curricula and instructional activities for undergraduate mathematics fail to bring the learner beyond the mathematics. The purpose of this study was to enhance students' mathematical thinking by implementing a computer algebra system and active learning pedagogical approaches. students' mathematical thinking processes were analyzed while completing specific differential equations tasks based on posed prompts and questions and Instrumental Genesis. Data were collected from 37 engineering students in a public Malaysian university. This study used the descriptive and interpretive qualitative research design to investigate the students' perspectives of emerging mathematical understanding and approaches to learning mathematics in an undergraduate differential equations course. Results of this study concluded that students used a variety of mathematical thinking processes in a non-sequential manner. Additionally, the outcomes provide justification for continued use of technologies such as computer algebra systems in undergraduate mathematics courses and the need for further studies to uncover the various processes students utilize to complete specific mathematical tasks.

Presentation on systems cluster research

NASA Technical Reports Server (NTRS)

Morgenthaler, George W.

1989-01-01

This viewgraph presentation presents an overview of systems cluster research performed by the Center for Space Construction. The goals of the research are to develop concepts, insights, and models for space construction and to develop systems engineering/analysis curricula for training future aerospace engineers. The following topics are covered: CSC systems analysis/systems engineering (SIMCON) model, CSC systems cluster schedule, system life-cycle, model optimization techniques, publications, cooperative efforts, and sponsored research.

Injecting Computational Thinking into Computing Activities for Middle School Girls

ERIC Educational Resources Information Center

Webb, Heidi Cornelia

2013-01-01

Advances in technology have caused high schools to update their computer science curricula; however there has been little analogous attention to technology-related education in middle schools. With respect to computer-related knowledge and skills, middle school students are at a critical phase in life, exploring individualized education options…

Team-Based Development of Medical Devices: An Engineering–Business Collaborative

PubMed Central

Eberhardt, Alan W.; Johnson, Ophelia L.; Kirkland, William B.; Dobbs, Joel H.; Moradi, Lee G.

2016-01-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a “virtual company,” with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement. PMID:26902869

Reliability, Maintenance and Risk Assessment in Naval Architecture and Marine Engineering Education in the US.

ERIC Educational Resources Information Center

Inozu, Bahadir; Ayyub, Bilal A.

1999-01-01

Examines the current status of existing curricula, accreditation requirements, and new developments in Naval Architecture and Marine Engineering education in the United States. Discusses the emerging needs of the maritime industry in light of advances in information technology and movement toward risk-based, reliability-centered rule making in the…

Curricula and Programmes in Petroleum Engineering for Higher Technical Education Institutions: Comparative Analysis

ERIC Educational Resources Information Center

Tymkiv, Nadiya

2018-01-01

The article states the analysis of the curriculum that regulates the main purposes, essence and directions for petroleum training. The importance and necessity of positive usage of Austrian, English and Norwegian experience at the time of petroleum engineers training in the petroleum industry has been stressed on. The structure and content of…

Faculty Perspectives on the Inclusion of Work-Related Learning in Engineering Curricula

ERIC Educational Resources Information Center

Magnell, Marie; Geschwind, Lars; Kolmos, Anette

2017-01-01

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that…

Teachers' Incorporation of Argumentation to Support Engineering Learning in STEM Integration Curricula

ERIC Educational Resources Information Center

Mathis, Corey A.; Siverling, Emilie A.; Glancy, Aran W.; Moore, Tamara J.

2017-01-01

One of the fundamental practices identified in Next Generation Science Standards (NGSS) is argumentation, which has been researched in P-12 science education for the previous two decades but has yet to be studied within the context of P-12 engineering education. This research explores how elementary and middle school science teachers incorporated…

Are We Educating Engineers for Sustainability?: Comparison between Obtained Competences and Swedish Industry's Needs

ERIC Educational Resources Information Center

Hanning, Andreas; Abelsson, Anna Priem; Lundqvist, Ulrika; Svanstrom, Magdalena

2012-01-01

Purpose: The aim of this study is to contribute to the quality improvement and long-term strategic development of education for sustainable development (ESD) in engineering education curricula. Design/methodology/approach: The content in 70 courses in environment and SD were characterized and quantified using course document text analysis.…

Developing Globally Competent Engineering Researchers: Outcomes-Based Instructional and Assessment Strategies from the IREE 2010 China Research Abroad Program

ERIC Educational Resources Information Center

Jesiek, Brent K.; Haller, Yating; Thompson, Julia

2014-01-01

Responding to globalization trends, many engineering schools are internationalizing their courses and curricula to prepare graduates for careers that involve working across countries and cultures. As a result, both students and staff are looking beyond study abroad to international work, research, and service learning opportunities as alternate…

Mississippi Curriculum Framework for Diesel Equipment Repair & Service (Program CIP: 47.0605--Diesel Engine Mechanic & Repairer). Secondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for diesel engine mechanics I and II. Presented first are a program…

Supporting the STEM Pipeline: Linking Applied STEM Course-Taking in High School to Declaring a STEM Major in College

ERIC Educational Resources Information Center

Gottfried, Michael A.; Bozick, Robert

2016-01-01

Recently, through the support from the Obama administration, the traditional STEM curricula (science, technology, engineering, and mathematics) in high schools are being updated with integrated, applied STEM courses (e.g., technology and engineering) in order to enhance the "real world" applicability of scientific fields and ultimately…

Case-Based Instruction: Improving Students' Conceptual Understanding through Cases in a Mechanical Engineering Course

ERIC Educational Resources Information Center

Yadav, Aman; Vinh, Megan; Shaver, Gregory M.; Meckl, Peter; Firebaugh, Stephanie

2014-01-01

Recently, there has been a push within engineering curricula to adopt more learner-centered pedagogies, such as case-based instruction. Case-based instruction has been hypothesized to make the curriculum more relevant and motivating for students by pushing them to integrate the concepts they have learned with other experiences. The current study…

The Fall and Rise of Experiential Construction and Engineering Education: Decoupling and Recoupling Practice and Theory

ERIC Educational Resources Information Center

Forster, Alan Mark; Pilcher, Nick; Tennant, Stuart; Murray, Mike; Craig, Nigel; Copping, Alex

2017-01-01

From the mid-20th C., construction and engineering pedagogy and curricula have moved from long-held traditional experiential apprenticeship approaches to one ostensibly decoupling practice and theory. This paper traces this decoupling and explores modern-day opportunities and challenges for recoupling university education with industry practice.…

Identifying Indicators Related to Constructs for Engineering Design Outcome

ERIC Educational Resources Information Center

Wilhelmsen, Cheryl A.; Dixon, Raymond A.

2016-01-01

This study ranked constructs articulated by Childress and Rhodes (2008) and identified the key indicators for each construct as a starting point to explore what should be included on an instrument to measure the engineering design process and outcomes of students in high schools that use the PLTW and EbDTM curricula in Idaho. A case-study design…

Workshop Physics and Related Curricula: "A 25-Year History of Collaborative Learning Enhanced by Computer Tools for Observation and Analysis"

ERIC Educational Resources Information Center

Laws, Priscilla W.; Willis, Maxine C.; Sokoloff, David R.

2015-01-01

This article describes the 25-year history of development of the activity-based Workshop Physics (WP) at Dickinson College, its adaptation for use at Gettysburg Area High School, and its synergistic influence on curricular materials developed at the University of Oregon and Tufts University and vice versa. WP and these related curricula: 1) are…

Technical Writing: Its Importance in the Engineering Profession and Its Place in Engineering Curricula - A Survey of the Experience and Opinions of Prominent Engineers.

DTIC Science & Technology

1975-08-09

others, both orally and in writing. - Richard C. LeVere Johns - Manville Denver, Colorado 18 p»w>.^wammMiim<^*ji!wi»i; w mra’i&JifAt. 1...communicate with others, both orally and in writing. Richard C. LeVere Johns - Manville Denver, Colorado Research - research is not con^lete until the

Marrying Content and Process in Computer Science Education

ERIC Educational Resources Information Center

Zendler, A.; Spannagel, C.; Klaudt, D.

2011-01-01

Constructivist approaches to computer science education emphasize that as well as knowledge, thinking skills and processes are involved in active knowledge construction. K-12 computer science curricula must not be based on fashions and trends, but on contents and processes that are observable in various domains of computer science, that can be…

Design, Development and Implementation of a Middle School Computer Applications Curriculum.

ERIC Educational Resources Information Center

Pina, Anthony A.

This report documents the design, development, and implementation of computer applications curricula in a pilot program augmenting the regular curriculum for eighth graders at a private middle school. In assessing the needs of the school, a shift in focus was made from computer programming to computer application. The basic objectives of the…

Computer-Aided Apparel Design in University Curricula.

ERIC Educational Resources Information Center

Belleau, Bonnie D.; Bourgeois, Elva B.

1991-01-01

As computer-assisted design (CAD) become an integral part of the fashion industry, universities must integrate CAD into the apparel curriculum. Louisiana State University's curriculum enables students to collaborate in CAD problem solving with industry personnel. (SK)

Development of Active Learning Curriculum for CASPER's Microgravity Drop Tower

NASA Astrophysics Data System (ADS)

Carmona-Reyes, Jorge; Wang, Li; York, Judy; Matthews, Lorin; Laufer, Rene; Cook, Mike; Schmoke, Jimmy; Hyde, Truell

2016-10-01

As CASPER's new drop tower comes on line, plans for correlated educational research curricula are underway. CASPER's educational research team is working on developing curricula specific to the CASPER drop tower, modeled on a contest currently in use by (BEST) Robotics Inc. within central Texas independent school districts. The curricula integrates age specific use of computer programming software packages such as ``Scratch'' with industry standard communication protocols and augmented reality applications. Content is constructed around an earth and space science framework, covering subjects such as stars and galaxies, matter and energy, fusion and fission at a middle school level. CASPER faculty are partnering with the Region 12 Service Center; this combination provides a wide range of expertise that includes professional development, pedagogical methods, computational thinking in addition to microgravity and space science research expertise. The details of this work will be presented and samples of the manner in which it is impacting the CASPER research and educational outreach partnership will be discussed.

Robotics in the Early Childhood Classroom: Learning Outcomes from an 8-Week Robotics Curriculum in Pre-Kindergarten through Second Grade

ERIC Educational Resources Information Center

Sullivan, Amanda; Bers, Marina Umaschi

2016-01-01

In recent years there has been an increasing focus on the missing "T" of technology and "E" of engineering in early childhood STEM (science, technology, engineering, mathematics) curricula. Robotics offers a playful and tangible way for children to engage with both T and E concepts during their foundational early childhood…

Incorporating a Systems Approach into Civil and Environmental Engineering Curricula: Effect on Course Redesign, and Student and Faculty Attitudes

ERIC Educational Resources Information Center

Hayden, Nancy J.; Rizzo, Donna M.; Dewoolkar, Mandar M.; Neumann, Maureen D.; Lathem, Sandra; Sadek, Adel

2011-01-01

This paper presents a brief overview of the changes made during our department level reform (DLR) process (Grant Title: "A Systems Approach for Civil and Environmental Engineering Education: Integrating Systems Thinking, Inquiry-Based Learning and Catamount Community Service-Learning Projects") and some of the effects of these changes on…

Specific and Optional Curriculum: An Experience in the Undergraduate Program of Chemical Engineering in Cienfuegos University, Cuba

ERIC Educational Resources Information Center

Martínez, Yolanda García; Velázquez, Claudia Alvarado; Castillo, Rolando Delgado

2016-01-01

This paper pursues to define the pillars for designing the specific (SC) and optional curricula (OC) of Unit Operations and Processes (UOP) Discipline in the Chemical Engineering Program. To achieve this objective a methodology was developed, which was characterized by the participation of every member in the educational process: professors,…

Evaluation of Social Competencies in Chemical Engineering: Application and Results of the Pilot Test (Academic Year 2012-2013)

ERIC Educational Resources Information Center

Grande, Francisco José Suñé; Witt, Hans Jörg; Avalos, Josep Bonet

2015-01-01

The Escola Tècnica Superior d'Enginyeria Química has a long tradition in the deployment of social competencies in engineering curricula through Integrated Projects (IP) carried out in structured teams. Social competencies are taught and practiced during the development of the IPs. We conceptually introduce a methodology for a 360 degrees…

A Curricular Analysis of Undergraduate Technology & Engineering Teacher Preparation Programs in the United States

ERIC Educational Resources Information Center

Litowitz, Len S.

2014-01-01

Technology & engineering teacher preparation programs at colleges and universities in the United States have been in a state of decline since the 1970's. In the fall of 2013 a study was conducted to compare the required curricula of the 24 undergraduate programs that maintain enrollment of 20 students or more in order to determine what a…

Recent Evolution of the Introductory Curriculum in Computing.

ERIC Educational Resources Information Center

Tucker, Allen B.; Garnick, David K.

1991-01-01

Traces the evolution of introductory computing courses for undergraduates based on the Association for Computing Machinery (ACM) guidelines published in "Curriculum 78." Changes in the curricula are described, including the role of discrete mathematics and theory; and the need for a broader model for designing introductory courses is…

Computer Use within a Play-Based Early Years Curriculum

ERIC Educational Resources Information Center

Howard, Justine; Miles, Gareth E.; Rees-Davies, Laura

2012-01-01

Early years curricula promote learning through play and in addition emphasise the development of computer literacy. Previous research, however, has described that teachers feel unprepared to integrate Information and Communication Technology (ICT) and play. Also, whereas research has suggested that effective computer use in the early years is…

The I-Generation--From Toddlers to Teenagers: A Conversation with Jane M. Healy.

ERIC Educational Resources Information Center

Tell, Carol

2000-01-01

In "Failure to Connect" (1998), Jane Healy examined pros and cons of computer use, warning that good teachers, small classes, and challenging curricula trump high-tech products. Computers can impede youngsters' development. Computers enhance learning only if teachers comprehend them, use appropriate applications, and define learning…

A review of Computer Science resources for learning and teaching with K-12 computing curricula: an Australian case study

NASA Astrophysics Data System (ADS)

Falkner, Katrina; Vivian, Rebecca

2015-10-01

To support teachers to implement Computer Science curricula into classrooms from the very first year of school, teachers, schools and organisations seek quality curriculum resources to support implementation and teacher professional development. Until now, many Computer Science resources and outreach initiatives have targeted K-12 school-age children, with the intention to engage children and increase interest, rather than to formally teach concepts and skills. What is the educational quality of existing Computer Science resources and to what extent are they suitable for classroom learning and teaching? In this paper, an assessment framework is presented to evaluate the quality of online Computer Science resources. Further, a semi-systematic review of available online Computer Science resources was conducted to evaluate resources available for classroom learning and teaching and to identify gaps in resource availability, using the Australian curriculum as a case study analysis. The findings reveal a predominance of quality resources, however, a number of critical gaps were identified. This paper provides recommendations and guidance for the development of new and supplementary resources and future research.

Summary of Computer Usage and Inventory of Computer Utilization in Curriculum. FY 1987-88.

ERIC Educational Resources Information Center

Tennessee Univ., Chattanooga. Center of Excellence for Computer Applications.

This report presents the results of a computer usage survey/inventory, the ninth in a series conducted at the University of Tennessee at Chattanooga to obtain information on the changing status of computer usage in the curricula. Data analyses are reported in 11 tables, which include comparisons between annual inventories and demonstrate growth…

A novel paradigm for engineering education: virtual internships with individualized mentoring and assessment of engineering thinking.

PubMed

Chesler, Naomi C; Ruis, A R; Collier, Wesley; Swiecki, Zachari; Arastoopour, Golnaz; Williamson Shaffer, David

2015-02-01

Engineering virtual internships are a novel paradigm for providing authentic engineering experiences in the first-year curriculum. They are both individualized and accommodate large numbers of students. As we describe in this report, this approach can (a) enable students to solve complex engineering problems in a mentored, collaborative environment; (b) allow educators to assess engineering thinking; and (c) provide an introductory experience that students enjoy and find valuable. Furthermore, engineering virtual internships have been shown to increase students'-and especially women's-interest in and motivation to pursue engineering degrees. When implemented in first-year engineering curricula more broadly, the potential impact of engineering virtual internships on the size and diversity of the engineering workforce could be dramatic.

Science curriculum effects in high school: A quantitative synthesis

NASA Astrophysics Data System (ADS)

Weinstein, Thomas; Boulanger, F. David; Walberg, Herbert J.

To assess the impact of the innovative precollege science curricula of the past twenty years on learning, a search was conducted using the computer-assisted Bibliographic Retrieval System (BRS), the ERIC Annual Summaries of Research in Science Education, and Dissertation Abstracts International. A total of 151 effect sizes were obtained from 33 studies representing 19,149 junior and senior high school students in the United States, Great Britain, and Israel. Study-weighted analysis yielded an overall mean effect size of 0.31 significantly favorable to the innovative curricula [t(25) = 2.183, p < 0.05] on all outcomes. Student performance in innovative curricula averaged in the 62nd percentile relative to the control norm. Tabulation of signed comparisons indicated that sixty-four out of eighty-one unweighted outcomes were favorable to the innovative curricula. Separate analyses for test content bias, methodological rigor, type of learning, and student characteristics showed no significant differences across these categories.

The Role of Academic Computer Departments in the Uses of Computers in the Undergraduate Curricula at the Two-Year College Level.

ERIC Educational Resources Information Center

Little, Joyce Currie

Academic computer departments, whether called by this name or by others such as the department of computer science or data programing, can be of great assistance to other departments in the two-year college. Faculty in other departments need to know about computer applications in their fields, require assistance in the development of curriculum…

Teaching Process Simulation in Eleven Easy Lessons Using Excel and Its Tools

NASA Astrophysics Data System (ADS)

Morris, Arthur E.

The primary market driver for improving process technology is innovation, which requires a skilled and educated workforce. However, many Materials Science and Engineering departments have eliminated extractive metallurgy and chemical thermodynamics from their curricula, yet these topics contain the necessary fundamentals for process innovation. As a result, most MS&E students are ill-prepared for careers in processing. The dearth of process-oriented MS&E curricula has prompted some Universities to develop a "shared" effort to offer distance education between multiple institutions [1]. A target audience for a shared process simulation course would not only benefit students, but also be a basis for an on-line course for practicing engineers faced with new or changing career choices. To fill the gap, the basics of a process simulation course was developed in an abbreviated form as series of eleven articles and Excel workbooks published in Industrial Heating magazine between July 2012 and July 2013.

Computer usage among nurses in rural health-care facilities in South Africa: obstacles and challenges.

PubMed

Asah, Flora

2013-04-01

This study discusses factors inhibiting computer usage for work-related tasks among computer-literate professional nurses within rural healthcare facilities in South Africa. In the past two decades computer literacy courses have not been part of the nursing curricula. Computer courses are offered by the State Information Technology Agency. Despite this, there seems to be limited use of computers by professional nurses in the rural context. Focus group interviews held with 40 professional nurses from three government hospitals in northern KwaZulu-Natal. Contributing factors were found to be lack of information technology infrastructure, restricted access to computers and deficits in regard to the technical and nursing management support. The physical location of computers within the health-care facilities and lack of relevant software emerged as specific obstacles to usage. Provision of continuous and active support from nursing management could positively influence computer usage among professional nurses. A closer integration of information technology and computer literacy skills into existing nursing curricula would foster a positive attitude towards computer usage through early exposure. Responses indicated that change of mindset may be needed on the part of nursing management so that they begin to actively promote ready access to computers as a means of creating greater professionalism and collegiality. © 2011 Blackwell Publishing Ltd.

Evaluating the Implementation of International Computing Curricular in African Universities: A Design-Reality Gap Approach

ERIC Educational Resources Information Center

Dasuki, Salihu Ibrahim; Ogedebe, Peter; Kanya, Rislana Abdulazeez; Ndume, Hauwa; Makinde, Julius

2015-01-01

Efforts are been made by Universities in developing countries to ensure that it's graduate are not left behind in the competitive global information society; thus have adopted international computing curricular for their computing degree programs. However, adopting these international curricula seem to be very challenging for developing countries…

Cloud Computing as a Core Discipline in a Technology Entrepreneurship Program

ERIC Educational Resources Information Center

Lawler, James; Joseph, Anthony

2012-01-01

Education in entrepreneurship continues to be a developing area of curricula for computer science and information systems students. Entrepreneurship is enabled frequently by cloud computing methods that furnish benefits to especially medium and small-sized firms. Expanding upon an earlier foundation paper, the authors of this paper present an…

Cloud Computing in the Curricula of Schools of Computer Science and Information Systems

ERIC Educational Resources Information Center

Lawler, James P.

2011-01-01

The cloud continues to be a developing area of information systems. Evangelistic literature in the practitioner field indicates benefit for business firms but disruption for technology departments of the firms. Though the cloud currently is immature in methodology, this study defines a model program by which computer science and information…

The Impact of Three-Dimensional Computational Modeling on Student Understanding of Astronomical Concepts: A Quantitative Analysis

ERIC Educational Resources Information Center

Hansen, John; Barnett, Michael; MaKinster, James; Keating, Thomas

2004-01-01

The increased availability of computational modeling software has created opportunities for students to engage in scientific inquiry through constructing computer-based models of scientific phenomena. However, despite the growing trend of integrating technology into science curricula, educators need to understand what aspects of these technologies…

Globalized Computing Education: Europe and the United States

ERIC Educational Resources Information Center

Scime, A.

2008-01-01

As computing makes the world a smaller place there will be an increase in the mobility of information technology workers and companies. The European Union has recognized the need for mobility and is instituting educational reforms to provide recognition of worker qualifications. Within computing there have been a number of model curricula proposed…

How Many Hours of Instruction Are Needed for Students to Become Competent in Engineering Subjects?

ERIC Educational Resources Information Center

Perdigones, Alicia; Benedicto, Susana; Sánchez-Espinosa, Elvira; Gallego, Eutiquio; García, José L.

2014-01-01

The aim of this work was to compare the curricula of three different agricultural engineering courses and to determine the competence of graduating students in three subject areas in order to identify possible shortfalls in the number of hours of instruction (HI) required for full competence to be attained. A total of 132 students sat a voluntary…

A Survey of the Role of Thermodynamics and Transport Properties in Chemical Engineering University Education in Europe and the USA

ERIC Educational Resources Information Center

Ahlstrom, Peter; Aim, Karel; Dohrn, Ralf; Elliott, J. Richard; Jackson, George; Jaubert, Jean-Noel; Macedo, Eugenia A.; Pokki, Juha-Pekka; Reczey, Kati; Victorov, Alexey; Zilnik, Ljudmila Fele; Economou, Ioannis G.

2010-01-01

A survey on the teaching of thermodynamics and transport phenomena in chemical engineering curricula in European and US Universities was performed and results are presented here. Overall, 136 universities and colleges responded to the survey, out of which 81 from Europe and 55 from the USA. In most of the institutions responding at least two…

Practice-Relevant Pedagogy for Mining Software Engineering Curricula Assets

DTIC Science & Technology

2007-06-20

permits the application of the Lean methods by virtually grouping shared services into eWorkcenters to which only non-routine requests are routed...engineering can be applied to IT shared services improvement and provide precise system improvement methods to complement the ITIL best practice. This...Vertical� or internal service- chain of primary business functions and enabling shared services Framework results - Mined patterns that relate

Approaches and Tools Used to Teach the Computer Input/Output Subsystem: A Survey

ERIC Educational Resources Information Center

Larraza-Mendiluze, Edurne; Garay-Vitoria, Nestor

2015-01-01

This paper surveys how the computer input/output (I/O) subsystem is taught in introductory undergraduate courses. It is important to study the educational process of the computer I/O subsystem because, in the curricula recommendations, it is considered a core topic in the area of knowledge of computer architecture and organization (CAO). It is…

Environmental Engineering Curricula assessment in the global world

NASA Astrophysics Data System (ADS)

Caporali, Enrica; Catelani, Marcantonio; Manfrida, Giampaolo; Valdiserri, Juna

2014-05-01

Environmental engineers are technicians with specific expertise on the sustainability of human presence in the environment. Among other global dilemmas, to the environmental engineers it is often demanded to be able in developing systematic, innovative solutions in order to simultaneously meet water and energy needs, to build resilience to natural and technological disasters, to more accurately gauge and manage countries' greenhouse gas emissions. The general objectives of the Environmental Engineers are to establish actions of environmental sustainability as well as to verify progress toward global goals or international commitments. The globalization of challenges and problems to be faced, leads, in general, to the globalization of the engineering profession. In particular, since the environmental issues are without boundaries, and many and different are the involved professions and the competences, the environmental engineer must have a multidisciplinary and interdisciplinary approach to adequately answer to the demand of technical innovative knowledge at global scale. The environmental engineers, more and more, are involved in international projects were the effective collaboration requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. The Europe-based EUR ACE system, currently operated by ENAEE - European Network for Accreditation of Engineering Education, can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. In the global frame of the knowledge triangle: education-innovation-research, the accreditation and quality assurance of engineering curricula in Europe is discussed with reference to the Environmental engineering curricula, of the 1st and 2nd cycle, based on the European Credit Transfer System and in accordance with the Bologna Process, offered at School of Engineering, University of Firenze. The application of the accreditation model EUR-ACE to the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering is discussed. Particularly, the critical issues to guarantee the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences are examined. The expected learning outcomes of the quality assessment according the Dublin descriptors or the more engineering focused EUR-ACE skill descriptors, and at local and global scale are analysed. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is also assessed. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities, and in general in comparing the teaching profile with the actual needs of the technical workforce, is described. With the aim to promote the innovative aspects related with the environmental engineering education, the important role that science and technology could play is also taken into consideration.

Green engineering education through a U.S. EPA/academia collaboration.

PubMed

Shonnard, David R; Allen, David T; Nguyen, Nhan; Austin, Sharon Weil; Hesketh, Robert

2003-12-01

The need to use resources efficiently and reduce environmental impacts of industrial products and processes is becoming increasingly important in engineering design; therefore, green engineering principles are gaining prominence within engineering education. This paper describes a general framework for incorporating green engineering design principles into engineering curricula, with specific examples for chemical engineering. The framework for teaching green engineering discussed in this paper mirrors the 12 Principles of Green Engineering proposed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), especially in methods for estimating the hazardous nature of chemicals, strategies for pollution prevention, and approaches leading to efficient energy and material utilization. The key elements in green engineering education, which enlarge the "box" for engineering design, are environmental literacy, environmentally conscious design, and beyond-the-plant boundary considerations.

Engineering the curriculum: Towards an adaptive curriculum

NASA Astrophysics Data System (ADS)

Johns-Boast, Lynette Frances

The curriculum is one of the most important artefacts produced by higher education institutions, yet it is one of the least studied. Additionally, little is known about the decision-making of academics when designing and developing their curricula, nor how they make use of them. This research investigates how 22 Australian higher education engineering, software engineering, computer science, and information systems academics conceive of curriculum, what approaches they take when designing, and developing course and program curricula, and what use they make of the curriculum. It also considers the implications of these conceptions and behaviour upon their curricula. Data were collected through a series of one-to-one, in-depth, qualitative interviews as well as small focus group sessions and were analysed following Charmaz’ (2006) approach to grounded theory. In this thesis, I argue that the development of curricula for new higher degree programs and courses and / or the updating and innovating of an existing curriculum is a design problem. I also argue that curriculum is a complex adaptive system. Surrounding the design and development of a curriculum is a process of design that leads to the creation of a designed object - the official-curriculum. The official-curriculum provides the guiding principles for its implementation, which involves the design and development of the curriculum-in-use, its delivery, and evaluation. Data show that while the participants conceive of curriculum as a problem of design involving a design process leading to the development of the official-curriculum, surprisingly, their behaviour does not match their conceptions. Over a very short period, their behaviour leads to a process I have called curriculum drift where the official-curriculum and the curriculum-in-use drift away from each other causing the curriculum to lose its integrity. Curricular integrity is characterised through the attributes of alignment, coherence, and cohesiveness. Without integrity, a curriculum is unlikely to be able to deliver all its required outcomes. Utilising the concepts of system dynamics and systems thinking I propose that not only is the curriculum a complex adaptive system, it is a multi-dimensional object. Adopting this notion facilitates possible interventions that may be used to monitor the curriculum and to moderate the effects of curriculum drift. I argue that using the articulated purpose of the curriculum to determine the desired outcomes of that curriculum will enhance curricular alignment, leading to improved student learning and outcomes. Furthermore, perceiving the curriculum as a multi-dimensional object reinforces the proposition that aligning the purpose and desired outcomes of each course with those of the program will achieve improved desired outcomes from the program as a whole. The original contributions to knowledge arising from this research are curriculum drift, an enhanced approach to the curricular alignment, and a multi-dimensional view of curriculum. Perhaps the most important implication of this research, is insight into how we might incorporate curriculum drift into curriculum review models. Successful incorporation has the potential to deliver increased quality of educational outcomes by enabling innovation whilst maintaining the integrity of the curriculum.

Task-Based Assessment of Students' Computational Thinking Skills Developed through Visual Programming or Tangible Coding Environments

ERIC Educational Resources Information Center

Djambong, Takam; Freiman, Viktor

2016-01-01

While today's schools in several countries, like Canada, are about to bring back programming to their curricula, a new conceptual angle, namely one of computational thinking, draws attention of researchers. In order to understand the articulation between computational thinking tasks in one side, student's targeted skills, and the types of problems…

Alice in Oman: A Study on Object-First Approaches in Computer Science Education

ERIC Educational Resources Information Center

Hayat, Khizar; Al-Shukaili, Naeem Ali; Sultan, Khalid

2017-01-01

The success of university-level education depends on the quality of underlying school education and any deficiency therein may be detrimental to a student's career. This may be more glaring with Computer Science education, given its mercurial nature. In the developing countries, the Computer Science school curricula are usually stuffed with…

Computing Education in Children's Early Years: A Call for Debate

ERIC Educational Resources Information Center

Manches, Andrew; Plowman, Lydia

2017-01-01

International changes in policy and curricula (notably recent developments in England) have led to a focus on the role of computing education in the early years. As interest in the potential of computing education has increased, there has been a proliferation of programming tools designed for young children. While these changes are broadly to be…

Incorporating Knowledge of Legal and Ethical Aspects into Computing Curricula of South African Universities

ERIC Educational Resources Information Center

Wayman, Ian; Kyobe, Michael

2012-01-01

As students in computing disciplines are introduced to modern information technologies, numerous unethical practices also escalate. With the increase in stringent legislations on use of IT, users of technology could easily be held liable for violation of this legislation. There is however lack of understanding of social aspects of computing, and…

Implementing CDIO project-based learning in training of Heat and Power engineers

NASA Astrophysics Data System (ADS)

Boiko, E. A.; Shishmarev, P. V.; Karabarin, D. I.; Yanov, S. R.; Pikalova, A. A.

2017-11-01

This paper presents the experience and current results of CDIO standards implementation in training of bachelors in Heat and Power Engineering at Thermal Power Stations academic department in Siberian Federal University. It provides information on methodology of modernization of educational programs, curricula and programs of disciplines in transition to CDIO project-based learning technology. Preliminary assessment and analysis of lessons learned and scaling perspectives are given.

Integration of Research Into Grade Nine-Graduate Level Curricula

NASA Astrophysics Data System (ADS)

Bonner, J.; Callicott, K.; Page, C.

2004-05-01

Research on the Kolb Learning Cycle, engineering education, and recent cognitive learning research indicates that learning occurs through knowledge application. Moreover, experts in a given discipline will differ from novices with regard to their ability to transfer their knowledge by application to new contexts. We have developed a suite of educational opportunities to bridge the gap between research and the classroom, with activities spanning the educational spectrum from high school through graduate school. One mechanism for transferring of research into undergraduate/graduate curricula is through our National Science Foundation (NSF) funded Combined Research-Curriculum Development (CRCD) project ("Environmental Informatics in Coastal Margins"). This project modifies engineering curricula to provide the nation with the next generation of engineers who can utilize the latest environmental modeling tools. The project revises/creates three undergraduate courses forming the environmental informatics (EI) track of the civil engineering curriculum and two graduate courses integrating GIS and environmental measurements. Curriculum development efforts are guided by an expert team drawn from nearby campuses and both regional and national industry, and includes an expert in assessing the pedagogical value of the curriculum and developing suitable metrics to evaluate student learning experiences. Another NSF-funded project integrating research into an undergraduate educational setting is our Research Experience for Undergraduates (REU) project ("Undergraduate Research in Biodiversity and Ecological Processes in Fluctuating Environments"). Research includes overlapping topics in environmental engineering and life sciences. The summer research experience provides students an opportunity to integrate engineering and life science technologies and to the study of ecological processes associated with biodiversity and environmental quality. Students orally present their project and submit in-depth papers. Over twenty publications/proceedings papers have been generated thus far. A third project involves our collaborations with the ITS Center ("Information Technology in Science Center for Teaching and Learning") on the A&M campus. As an investment in "project team growing", the Center is collaborating with us to collect data on implementation of an engineering science and math enhancement module in Hearne Independent School District. The specific activity involves a CRCD engineering class and an educational psychology undergraduate class. The engineering students give group presentations, where each presentation addresses a scenario that focuses on an environmental topic presented in the class. The students present the technical material to the education students who serve as a non-technical lay audience, emulating a city council, for example. The education students adapt the material for presentation to high school students, working with mentor teachers to enhance content, relevance and hands on experience while learning to apply teaching pedagogy.

seismo-live: Training in Seismology using Jupyter Notebooks

NASA Astrophysics Data System (ADS)

Igel, Heiner; Krischer, Lion; van Driel, Martin; Tape, Carl

2017-04-01

Practical training in computational methodologies is still underrepresented in Earth science curriculae despite the increasing use of sometimes highly sophisticated simulation and data processing technologies in research projects. At the same time well-engineered community codes make it easy to return results yet with the danger that the inherent traps of black-box solutions are not well understood. For this purpose we have initiated a community platform (www.seismo-live.org) where Python-based Jupyter notebooks can be accessed and run without necessary downloads or local software installations. The increasingly popular Jupyter notebooks allow combining markup language, graphics, equations, with interactive, executable python codes. The platform already includes general Python training, introduction to the ObsPy library for seismology as well as seismic data processing, noise analysis, and a variety of forward solvers for seismic wave propagation. In addition, an example is shown how Jupyter notebooks can be used to increase reproducibility of published results. Submission of Jupyter notebooks for general seismology are encouraged. The platform can be used for complementary teaching in Earth Science courses on compute-intensive research areas. We present recent developments and new features.

Cost-Effectiveness of Alternative Approaches to Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Levin, Henry M.; And Others

Operating on the premise that different approaches to computer-assisted instruction (CAI) may use different configurations of hardware and software, different curricula, and different organizational and personnel arrangements, this study explored the feasibility of collecting evaluations of CAI to evaluate the comparative cost-effectiveness of…

The Teaching of Anthropogenic Climate Change and Earth Science via Technology-Enabled Inquiry Education

NASA Technical Reports Server (NTRS)

Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

2016-01-01

A gap has existed between the tools and processes of scientists working on anthropogenic global climate change (AGCC) and the technologies and curricula available to educators teaching the subject through student inquiry. Designing realistic scientific inquiry into AGCC poses a challenge because research on it relies on complex computer models, globally distributed data sets, and complex laboratory and data collection procedures. Here we examine efforts by the scientific community and educational researchers to design new curricula and technology that close this gap and impart robust AGCC and Earth Science understanding. We find technology-based teaching shows promise in promoting robust AGCC understandings if associated curricula address mitigating factors such as time constraints in incorporating technology and the need to support teachers implementing AGCC and Earth Science inquiry. We recommend the scientific community continue to collaborate with educational researchers to focus on developing those inquiry technologies and curricula that use realistic scientific processes from AGCC research and/or the methods for determining how human society should respond to global change.

Flight-vehicle structures education in the US: Assessment and recommendations

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.

1987-01-01

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.

Systemic and Global Learning.

ERIC Educational Resources Information Center

Small, Michele Geslin

In a rapidly changing world, schools need to reorient their curricula to ensure adequate preparation of children for the future. Among the fundamental changes affecting society are the diversification of lifestyles, the development of genetic engineering, trends toward automation, and the information explosion. The educational crisis reflects…

Teaching STEM by Design

ERIC Educational Resources Information Center

Billiar, Kristen; Hubelbank, Jeanne; Oliva, Thomas; Camesano, Terri

2014-01-01

Developing innovative science, technology, engineering and mathematics (STEM) curricula that elicit student excitement for learning is a continuous challenge for K-12 STEM teachers. Generating these lessons while meeting conflicting pedagogical objectives and constraints of time, content, and cost from various parties is truly a challenging task…

STEM Curricula. Premiere PD

ERIC Educational Resources Information Center

Brown, Ryan, Ed.; Ernst, Jeremy, Ed.; Clark, Aaron, Ed.; DeLuca, Bill, Ed.; Kelly, Daniel, Ed.

2017-01-01

This professional development activity on STEM Education is designed to keep Technology and Engineering teachers up to date regarding current and important issues in the discipline. This article describes why there is a focus on STEM Education, defines STEM Education, and discusses curriculum integration and its elements.

Teacher's Guide for Computational Models of Animal Behavior: A Computer-Based Curriculum Unit to Accompany the Elementary Science Study Guide "Behavior of Mealworms." Artificial Intelligence Memo No. 432.

ERIC Educational Resources Information Center

Abelson, Hal; Goldenberg, Paul

This experimental curriculum unit suggests how dramatic innovations in classroom content may be achieved through use of computers. The computational perspective is viewed as one which can enrich and transform traditional curricula, act as a focus for integrating insights from diverse disciplines, and enable learning to become more active and…

A History of the Liberal Arts Computer Science Consortium and Its Model Curricula

ERIC Educational Resources Information Center

Bruce, Kim B.; Cupper, Robert D.; Scot Drysdale, Robert L.

2010-01-01

With the support of a grant from the Sloan Foundation, nine computer scientists from liberal arts colleges came together in October, 1984 to form the Liberal Arts Computer Science Consortium (LACS) and to create a model curriculum appropriate for liberal arts colleges. Over the years the membership has grown and changed, but the focus has remained…

Military Curricula for Vocational & Technical Education. Communications Computer Programmer, 4-2.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These student materials--study guides, handouts (some are manuals), a workbook, and programmed texts--for a secondary-postsecondary-level course for communications computer programmer are one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. A…

Teaching Mental Computation Strategies in Early Mathematics

ERIC Educational Resources Information Center

Heirdsfield, Ann Margaret

2011-01-01

Mental computation--that is, calculating in the head--is a relatively new topic in mathematics curricula for primary-age children. It is an important skill because it enables children to learn more deeply how numbers work, make decisions about procedures, and create strategies for calculating, thus promoting number sense--a well-developed…

Computer Security Primer: Systems Architecture, Special Ontology and Cloud Virtual Machines

ERIC Educational Resources Information Center

Waguespack, Leslie J.

2014-01-01

With the increasing proliferation of multitasking and Internet-connected devices, security has reemerged as a fundamental design concern in information systems. The shift of IS curricula toward a largely organizational perspective of security leaves little room for focus on its foundation in systems architecture, the computational underpinnings of…

STEM?!?!

ERIC Educational Resources Information Center

Merrill, Jen

2012-01-01

The author's son has been an engineer since birth. He never asked "why" as a toddler, it was always "how's it work?" So that he wanted a STEM-based home education was no big surprise. In this article, the author considers what kind of curricula would work best for her complex kid.

Modeling an explosion : the devil is in the details

Treesearch

Peter W. Hart; Alan W. Rudie

2011-01-01

The Chemical Safety and Hazards Investigation Board has recently encouraged chemical engineering faculty to address student knowledge about reactive hazards in their curricula. This paper presents a simple approach that may be used to illustrate the importance of these types of safety considerations.

Bridging STEM in a Real World Problem

ERIC Educational Resources Information Center

English, Lyn D.; Mousoulides, Nicholas G.

2015-01-01

Engineering-based modeling activities provide a rich source of meaningful situations that capitalize on and extend students' routine learning. By integrating such activities within existing curricula, students better appreciate how their school learning in mathematics and science applies to problems in the outside world. Furthermore, modeling…

Internet-based Interactive Construction Management Learning System.

ERIC Educational Resources Information Center

Sawhney, Anil; Mund, Andre; Koczenasz, Jeremy

2001-01-01

Describes a way to incorporate practical content into the construction engineering and management curricula: the Internet-based Interactive Construction Management Learning System, which uses interactive and adaptive learning environments to train students in the areas of construction methods, equipment and processes using multimedia, databases,…

Standardized Curriculum for Automotive Mechanics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: automotive mechanics I and II. The six units in automotive mechanics I are as follows: orientation and safety; tools, equipment, and manuals; measurement; automotive engines; basic electrical systems; and fuel systems. Automotive…

A report on NASA software engineering and Ada training requirements

NASA Technical Reports Server (NTRS)

Legrand, Sue; Freedman, Glenn B.; Svabek, L.

1987-01-01

NASA's software engineering and Ada skill base are assessed and information that may result in new models for software engineering, Ada training plans, and curricula are provided. A quantitative assessment which reflects the requirements for software engineering and Ada training across NASA is provided. A recommended implementation plan including a suggested curriculum with associated duration per course and suggested means of delivery is also provided. The distinction between education and training is made. Although it was directed to focus on NASA's need for the latter, the key relationships to software engineering education are also identified. A rationale and strategy for implementing a life cycle education and training program are detailed in support of improved software engineering practices and the transition to Ada.

Ethics and the UN Sustainable Development Goals: The Case for Comprehensive Engineering : Commentary on "Using Student Engagement to Relocate Ethics to the Core of the Engineering Curriculum".

PubMed

van den Hoven, Jeroen

2016-12-27

In the twenty-first century, the urgent problems the world is facing (the UN Sustainable Development Goals) are increasingly related to vast and intricate 'systems of systems', which comprise both socio-technical and eco-systems. In order for engineers to adequately and responsibly respond to these problems, they cannot focus on only one technical or any other aspect in isolation, but must adopt a wider and multidisciplinary perspective of these systems, including an ethical and social perspective. Engineering curricula should therefore focus on what we call 'comprehensive engineering'. Comprehensive engineering implies ethical coherence, consilience of scientific disciplines, and cooperation between parties.

Promoting harmonization of BME education in Europe: the CRH-BME Tempus project.

PubMed

Pallikarakis, Nicolas; Bliznakov, Zhivko; Miklavcic, Damijan; Jarm, Tomaz; Magjarevic, Ratko; Lackovic, Igor; Pecchia, Leandro; Stagni, Rita; Jobaggy, Akos; Barbenel, Joseph

2011-01-01

Biomedical Engineers should be prepared to adapt to existing or forecasted needs. There is a strong pressure on education, training and life long learning programs to continuously adapt their objectives in order to face new requirements and challenges. The main objective of the TEMPUS IV, CRH-BME project is to update existing curricula in the field of Biomedical Engineering (BME) in order to meet recent and future developments in the area, address new emerging inter-disciplinary domains that appear as a result of the R&D progress and respond to the BME job market demands. The first step is to extensively review the curricula in the BME education field. In this paper, a proposal for a generic curriculum in the BME education is presented, in order to meet recent and future developments and respond to the demands of the BME job market. Adoption of the core program structure will facilitate harmonization of studies as well as student and staff exchange across Europe, thus promoting the European Higher Education Area.

In-Factory Learning - Qualification For The Factory Of The Future

NASA Astrophysics Data System (ADS)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

Transforming the advanced lab: Part I - Learning goals

NASA Astrophysics Data System (ADS)

Zwickl, Benjamin; Finkelstein, Noah; Lewandowski, H. J.

2012-02-01

Within the physics education research community relatively little attention has been given to laboratory courses, especially at the upper-division undergraduate level. As part of transforming our senior-level Optics and Modern Physics Lab at the University of Colorado Boulder we are developing learning goals, revising curricula, and creating assessments. In this paper, we report on the establishment of our learning goals and a surrounding framework that have emerged from discussions with a wide variety of faculty, from a review of the literature on labs, and from identifying the goals of existing lab courses. Our goals go beyond those of specific physics content and apparatus, allowing instructors to personalize them to their contexts. We report on four broad themes and associated learning goals: Modeling (math-physics-data connection, statistical error analysis, systematic error, modeling of engineered "black boxes"), Design (of experiments, apparatus, programs, troubleshooting), Communication, and Technical Lab Skills (computer-aided data analysis, LabVIEW, test and measurement equipment).

Health Information Technology as a Universal Donor to Bioethics Education.

PubMed

Goodman, Kenneth W

2017-04-01

Health information technology, sometimes called biomedical informatics, is the use of computers and networks in the health professions. This technology has become widespread, from electronic health records to decision support tools to patient access through personal health records. These computational and information-based tools have engendered their own ethics literature and now present an opportunity to shape the standard medical and nursing ethics curricula. It is suggested that each of four core components in the professional education of clinicians-privacy, end-of-life care, access to healthcare and valid consent, and clinician-patient communication-offers an opportunity to leverage health information technology for curricular improvement. Using informatics in ethics education freshens ethics pedagogy and increases its utility, and does so without additional demands on overburdened curricula.

Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research: scientific and cultural exchange in undergraduate engineering.

PubMed

Wisneski, Andrew D; Huang, Lixia; Hong, Bo; Wang, Xiaoqin

2011-01-01

A model for an international undergraduate biomedical engineering research exchange program is outlined. In 2008, the Johns Hopkins University in collaboration with Tsinghua University in Beijing, China established the Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research. Undergraduate biomedical engineering students from both universities are offered the opportunity to participate in research at the overseas institution. Programs such as these will not only provide research experiences for undergraduates but valuable cultural exchange and enrichment as well. Currently, strict course scheduling and rigorous curricula in most biomedical engineering programs may present obstacles for students to partake in study abroad opportunities. Universities are encouraged to harbor abroad opportunities for undergraduate engineering students, for which this particular program can serve as a model.

Proceedings of the Annual Conference on "The Role of the Computer in Education" (5th, Arlington Heights, Illinois, February 20-22, 1985).

ERIC Educational Resources Information Center

Micro-Ideas, Glenview, IL.

The 46 papers in this proceedings summarize the work of academic and private groups which seek to provide a means of integrating the utilization of the computer into an established curriculum; descriptions of sample courses are included. The contents include: (1) Four Precollege Computer Curricula: A Symposium; (2) Data Processing Management…

The Effects of Student Narration in College Engineering Classes

DTIC Science & Technology

2015-01-01

93(3), 223-231. 2004. 6. Norman, G., and Schmidt, H., “Effectiveness of Problem-Based Learning Curricula: Theory, Practice and Paper Darts ...conference papers . Dr. Richard Buckley is Lt Col in the U.S. Air Force and an Assistant Professor and Senior Military Faculty at the US Air Force...journal and conference papers . Dr. Dan Jensen is a Professor of Engineering Mechanics at the U.S. Air Force Academy where he has been since 1997. He

Critical assessment and outlook for the 50 biomedical engineering undergraduate programs in Mexico.

PubMed

Azpiroz-Leehan, Joaquín; Martínez Licona, Fabiola; Urbina Medal, E Gerardo; Cadena Méndez, Miguel; Sacristán Rock, Emilio

2015-01-01

Biomedical Engineering (BME) has been taught in Mexico at the undergraduate level for over forty years. The rationale for the introduction of this profession was to help manage and maintain the growing technological infrastructure in the health care system during the seventies. Owing to this, it is not surprising that early versions of the BME curricula were oriented towards clinical engineering and medical instrumentation. In the last decade the number of programs has grown from three in the seventies and eighties to fifty at present. This work is the result of the analysis of the BME programs in all the institutions that offer this degree in Mexico. Three main issues were studied: the curricula, the sub-disciplines that were emphasized in the programs and the job market. Results have shown a striking resemblance in most of the programs, which are mostly dedicated to teaching aspects of medical instrumentation and clinical engineering. These results reflect an agreement with the requirements of the job market, but since most job offerings are for low-paying positions in sales, service and hospital maintenance, we question the wisdom of stressing these sub-specialties at research universities, where faculties and research labs offer a wide variety of options. An analysis of work at these centers shows that most of the results are publications, so the need to emphasize translational research and partnerships with industry are suggested.

Factors That Encourage or Inhibit Computer Use for Secondary Mathematics Teaching

ERIC Educational Resources Information Center

Forgasz, Helen

2006-01-01

Included in contemporary mathematics curricula is the expectation that mathematics teachers will use technology--computers and calculators--in their classrooms. It is widely believed in Australian educational circles and in society at large that students' learning will be enhanced by engaging with these technologies. For children to use computers…

The Potential of Incorporating Computer Games in Foreign Language Curricula

ERIC Educational Resources Information Center

Mukundan, Jayakaran; Kalajahi, Seyed Ali Rezvani; Naghdipour, Bakhtiar

2014-01-01

There is ample evidence that technology-enhanced instruction could result in students' learning. With the advancement and ever-increasing growth of technology, the use of educational electronic games or computer games in education has appealed to both educators and students. Because of their potential to enhance students' interest, motivation and…

Military Curricula for Vocational & Technical Education. Computer System Operation, 4-3.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This program on instruction and programmed student texts for a secondary-postsecondary-level computer system operator course are one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Purpose stated for the ten-lesson course is to provide the…

Computer Software for Forestry Technology Curricula. Final Report.

ERIC Educational Resources Information Center

Watson, Roy C.; Scobie, Walter R.

Since microcomputers are being used more and more frequently in the forest products industry in the Pacific Northwest, Green River Community College conducted a project to search for BASIC language computer programs pertaining to forestry, and when possible, to adapt such software for use in teaching forestry technology. The search for applicable…

Information Systems Security and Computer Crime in the IS Curriculum: A Detailed Examination

ERIC Educational Resources Information Center

Foltz, C. Bryan; Renwick, Janet S.

2011-01-01

The authors examined the extent to which information systems (IS) security and computer crime are covered in information systems programs. Results suggest that IS faculty believe security coverage should be increased in required, elective, and non-IS courses. However, respondent faculty members are concerned that existing curricula leave little…

Presentation Trainer: What Experts and Computers Can Tell about Your Nonverbal Communication

ERIC Educational Resources Information Center

Schneider, J.; Börner, D.; van Rosmalen, P.; Specht, M.

2017-01-01

The ability to present effectively is essential for professionals; therefore, oral communication courses have become part of the curricula for higher education studies. However, speaking in public is still a challenge for many graduates. To tackle this problem, driven by the recent advances in computer vision techniques and prosody analysis,…

Computer Programming in the UK Undergraduate Mathematics Curriculum

ERIC Educational Resources Information Center

Sangwin, Christopher J.; O'Toole, Claire

2017-01-01

This paper reports a study which investigated the extent to which undergraduate mathematics students in the United Kingdom are currently taught to programme a computer as a core part of their mathematics degree programme. We undertook an online survey, with significant follow-up correspondence, to gather data on current curricula and received…

The "Star Trek" Phenomenon: Towards a Typology of Curricula in Information Management.

ERIC Educational Resources Information Center

Rowley, Jennifer; Slack, Frances

2000-01-01

Uses the metaphor of the Starship Enterprise to elucidate the nature of roles in information management. The spaceship metaphor is a framework to support the identification of roles of pilot (end user), maintenance engineer (information intermediary), and designer (information systems professional). (SLD)

Transformative Learning: Innovating Sustainability Education in Built Environment

ERIC Educational Resources Information Center

Iyer-Raniga, Usha; Andamon, Mary Myla

2016-01-01

Purpose: This paper aims to evaluate how transformative learning is key to innovating sustainability education in the built environment in the region's universities, in addition to reporting on the research project undertaken to integrate sustainability thinking and practice into engineering/built environment curricula in Asia-Pacific…

seismo-live: Training in Computational Seismology using Jupyter Notebooks

NASA Astrophysics Data System (ADS)

Igel, H.; Krischer, L.; van Driel, M.; Tape, C.

2016-12-01

Practical training in computational methodologies is still underrepresented in Earth science curriculae despite the increasing use of sometimes highly sophisticated simulation technologies in research projects. At the same time well-engineered community codes make it easy to return simulation-based results yet with the danger that the inherent traps of numerical solutions are not well understood. It is our belief that training with highly simplified numerical solutions (here to the equations describing elastic wave propagation) with carefully chosen elementary ingredients of simulation technologies (e.g., finite-differencing, function interpolation, spectral derivatives, numerical integration) could substantially improve this situation. For this purpose we have initiated a community platform (www.seismo-live.org) where Python-based Jupyter notebooks can be accessed and run without and necessary downloads or local software installations. The increasingly popular Jupyter notebooks allow combining markup language, graphics, equations with interactive, executable python codes. We demonstrate the potential with training notebooks for the finite-difference method, pseudospectral methods, finite/spectral element methods, the finite-volume and the discontinuous Galerkin method. The platform already includes general Python training, introduction to the ObsPy library for seismology as well as seismic data processing and noise analysis. Submission of Jupyter notebooks for general seismology are encouraged. The platform can be used for complementary teaching in Earth Science courses on compute-intensive research areas.

Virtual patient simulator for distributed collaborative medical education.

PubMed

Caudell, Thomas P; Summers, Kenneth L; Holten, Jim; Hakamata, Takeshi; Mowafi, Moad; Jacobs, Joshua; Lozanoff, Beth K; Lozanoff, Scott; Wilks, David; Keep, Marcus F; Saiki, Stanley; Alverson, Dale

2003-01-01

Project TOUCH (Telehealth Outreach for Unified Community Health; http://hsc.unm.edu/touch) investigates the feasibility of using advanced technologies to enhance education in an innovative problem-based learning format currently being used in medical school curricula, applying specific clinical case models, and deploying to remote sites/workstations. The University of New Mexico's School of Medicine and the John A. Burns School of Medicine at the University of Hawai'i face similar health care challenges in providing and delivering services and training to remote and rural areas. Recognizing that health care needs are local and require local solutions, both states are committed to improving health care delivery to their unique populations by sharing information and experiences through emerging telehealth technologies by using high-performance computing and communications resources. The purpose of this study is to describe the deployment of a problem-based learning case distributed over the National Computational Science Alliance's Access Grid. Emphasis is placed on the underlying technical components of the TOUCH project, including the virtual reality development tool Flatland, the artificial intelligence-based simulation engine, the Access Grid, high-performance computing platforms, and the software that connects them all. In addition, educational and technical challenges for Project TOUCH are identified. Copyright 2003 Wiley-Liss, Inc.

Virtual experiments in electronics: beyond logistics, budgets, and the art of the possible

NASA Astrophysics Data System (ADS)

Chapman, Brian

1999-09-01

It is common and correct to suppose that computers support flexible delivery of educational resources by offering virtual experiments that replicate and substitute for experiments traditionally offered in conventional teaching laboratories. However, traditional methods are limited by logistics, costs, and what is physically possible to accomplish on a laboratory bench. Virtual experiments allow experimental approaches to teaching and learning to transcend these limits. This paper analyses recent and current developments in educational software for 1st- year physics, 2nd-year electronics engineering and 3rd-year communication engineering, based on three criteria: (1)Is the virtual experiment possible in a real laboratory? (2)How direct is the link between the experimental manipulation and the reinforcement of theoretical learning? (3) What impact might the virtual experiment have on the learner's acquisition of practical measurement skills? Virtual experiments allow more flexibility in the directness of the link between experimental manipulation and the theoretical message. However, increasing the directness of this link may reduce or even abolish the measurement processes associated with traditional experiments. Virtual experiments thus pose educational challenges: (a) expanding the design of experimentally based curricula beyond traditional boundaries and (b) ensuring that the learner acquires sufficient experience in making practical measurements.

Flight-vehicle structures education in the United States Assessment and recommendations

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Dixon, S. C.

1987-01-01

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for the new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.

Diesel Mechanics: Meeting Tomorrow's Training Needs.

ERIC Educational Resources Information Center

Schulz, Erich J.

1978-01-01

As the use of diesel engines in motor vehicles and heavy equipment increases, the need for skilled diesel mechanics will increase. The author describes education and training needs in schools and industry, gives guidelines for trade and technical curricula, and outlines the kinds of training materials to be developed. (MF)

Web-Based Engine for Program Curriculum Designers

ERIC Educational Resources Information Center

Hamam, H.; Loucif, S.

2009-01-01

Educational institutions pay careful attention to the design of program curricula, which represent a framework to meet institutional goals and missions. Of course, the success of any institution depends highly on the quality of its program curriculum. The development of such a curriculum and, more importantly, the evaluation of its quality are…

A Novel Interdisciplinary Science Experience for Undergraduates across Introductory Biology, Chemistry, and Physics Courses

ERIC Educational Resources Information Center

Murray, Joelle L.; Atkinson, Elizabeth J. O.; Gilbert, Brian D.; Kruchten, Anne E.

2014-01-01

Successfully creating and implementing interdisciplinary curricula in introductory science, technology, engineering, and mathematics (STEM) courses is challenging, but doing so is increasingly more important as current problems in science become more interdisciplinary. Opening up the silos between science disciplines and overcoming common…

The Key Technologies. Some Implications for Education and Training. An Occasional Paper.

ERIC Educational Resources Information Center

Mansell, Jack; And Others

National competitiveness depends in large part on the practical application of technologies. Educational planners must, therefore, identify key (newly emerging) topics in science and engineering that are likely to have a major evolutionary effect on industry and incorporate these areas into existing vocational and technical curricula. Because…

Continuous and Batch Distillation in an Oldershaw Tray Column

ERIC Educational Resources Information Center

Silva, Carlos M.; Vaz, Raquel V.; Santiago, Ana S.; Lito, Patricia F.

2011-01-01

The importance of distillation in the separation field prompts the inclusion of distillation experiments in the chemical engineering curricula. This work describes the performance of an Oldershaw column in the rectification of a cyclohexane/n-heptane mixture. Total reflux distillation, continuous rectification under partial reflux, and batch…

Sci-Fi, Storytelling, and New-Media Literacy

ERIC Educational Resources Information Center

Subramaniam, Mega; Ahn, June; Waugh, Amanda; Druin, Allison

2012-01-01

Understanding how to better engage young students in science, technology, engineering, and math (STEM) is essential. The constraints of U.S. K-12 schools (e.g. insufficient institutional supports, lack of technology access, testing pressures, etc.) often make it difficult to create truly engaging STEM curricula with which students can deeply…

Power Product Equipment Technician: Construction Equipment. Teacher Edition. Student Edition.

ERIC Educational Resources Information Center

Hilley, Robert

The instructor's guide in this package, which is one in a series of new publications developed to replace the Multistate Academic and Vocational Curriculum Consortium's previous small-engine curricula, contains the materials required to teach a competency-based course in repairing construction equipment. The guide begins with an introduction…

Understanding the Behaviour of Infinite Ladder Circuits

ERIC Educational Resources Information Center

Ucak, C.; Yegin, K.

2008-01-01

Infinite ladder circuits are often encountered in undergraduate electrical engineering and physics curricula when dealing with series and parallel combination of impedances, as a part of filter design or wave propagation on transmission lines. The input impedance of such infinite ladder circuits is derived by assuming that the input impedance does…

Improving Conceptual Understanding and Representation Skills through Excel-Based Modeling

ERIC Educational Resources Information Center

Malone, Kathy L.; Schunn, Christian D.; Schuchardt, Anita M.

2018-01-01

The National Research Council framework for science education and the Next Generation Science Standards have developed a need for additional research and development of curricula that is both technologically model-based and includes engineering practices. This is especially the case for biology education. This paper describes a quasi-experimental…

An Educative, Values-Engaged Approach to Evaluating STEM Educational Programs

ERIC Educational Resources Information Center

Greene, Jennifer C.; DeStefano, Lizanne; Burgon, Holli; Hall, Jori

2006-01-01

There is concern that the nation's schools are not preparing students to excel in science, technology, engineering, and mathematics (STEM) fields. At both precollege and postsecondary levels, much effort is needed to create and implement powerful STEM curricula, prepare and support highly qualified teachers, deliver effective instruction, and give…

Hands-on curriculum teaches biomedical engineering concepts to home-schooled students.

PubMed

Sagstetter, Ann M; Nimunkar, Amit J; Tompkins, Willis J

2009-01-01

University level outreach has increased over the last decade to stimulate K-12 student interest in engineering related fields. Home schooling students are one of the groups that are valued for engineering admissions due to diligent study habits and high achievement scores. However, home schooled students have inadequate access to science, math, and engineering related resources, which precludes the development of interdisciplinary teaching methods. To address this problem, we have developed a hands-on, STEM based curriculum as a safe and comprehensive supplement to current home schooling curricula. The ultimate goal is to stimulate university-student relations and subsequently increase engineering recruitment opportunities. Our pre and post workshop survey comparisons demonstrate that integrating disciplines, via the manner presented in this study, provides a K-12 student-friendly engineering learning method.

Engineering education at a new public university in Brazil: first students' contact with engineering methods

NASA Astrophysics Data System (ADS)

Romero, Jesus Franklin A.; Leite, Patrícia; Mantovani, Gerson L.; Lanfredi, Alexandre J. C.; Martins-Filho, Luiz S.

2011-06-01

This paper describes the experience of an introductory discipline to the engineering curricula at the Brazilian Federal University of ABC (UFABC). The university offers a common basic curriculum that must be accomplished by every student and can be followed by professionalising courses. The discipline 'Introduction to Engineering' presents the basis of the engineering career, methods and thinking together with professional commitments and regulations. The objective is to help students to consciously choose their careers, minimising the precocity problem in deciding a professional future. The discipline methodology includes activities proposed by the TryEngineering website and from Brazilian engineering councils. Lectures with invited professors introduce UFABC engineering specialities: Aerospace, Bioengineering, Energy, Environmental & Urban, Information, Instrumentation & Automation & Robotics, Management, Materials. This paper reports the proposed activities, results obtained by the students, a methodology critical analysis and the impacts on the following steps of students embracing an engineering career.

Integrating ecology into biotechnology.

PubMed

McMahon, Katherine D; Martin, Hector Garcia; Hugenholtz, Philip

2007-06-01

New high-throughput culture-independent molecular tools are allowing the scientific community to characterize and understand the microbial communities underpinning environmental biotechnology processes in unprecedented ways. By creatively leveraging these new data sources, microbial ecology has the potential to transition from a purely descriptive to a predictive framework, in which ecological principles are integrated and exploited to engineer systems that are biologically optimized for the desired goal. But to achieve this goal, ecology, engineering and microbiology curricula need to be changed from the very root to better promote interdisciplinarity.

Development of a Computer-Assisted Cranial Nerve Simulation from the Visible Human Dataset

ERIC Educational Resources Information Center

Yeung, Jeffrey C.; Fung, Kevin; Wilson, Timothy D.

2011-01-01

Advancements in technology and personal computing have allowed for the development of novel teaching modalities such as online web-based modules. These modules are currently being incorporated into medical curricula and, in some paradigms, have been shown to be superior to classroom instruction. We believe that these modules have the potential of…

From Requirements to Code: Issues and Learning in IS Students' Systems Development Projects

ERIC Educational Resources Information Center

Scott, Elsje

2008-01-01

The Computing Curricula (2005) place Information Systems (IS) at the intersection of exact sciences (e.g. General Systems Theory), technology (e.g. Computer Science), and behavioral sciences (e.g. Sociology). This presents particular challenges for teaching and learning, as future IS professionals need to be equipped with a wide range of…

Mississippi Curriculum Framework for Business and Computer Technology (Program CIP: 52.0408--Gen. Office/Clerical & Typing Service). Secondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for secondary-level courses in business and computer technology I-II.…

Tri-P-LETS: Changing the Face of High School Computer Science

ERIC Educational Resources Information Center

Sherrell, Linda; Malasri, Kriangsiri; Mills, David; Thomas, Allen; Greer, James

2012-01-01

From 2004-2007, the University of Memphis carried out the NSF-funded Tri-P-LETS (Three P Learning Environment for Teachers and Students) project to improve local high-school computer science curricula. The project reached a total of 58 classrooms in eleven high schools emphasizing problem solving skills, programming concepts as opposed to syntax,…

The Use of Video-Gaming Devices as a Motivation for Learning Embedded Systems Programming

ERIC Educational Resources Information Center

Gonzalez, J.; Pomares, H.; Damas, M.; Garcia-Sanchez,P.; Rodriguez-Alvarez, M.; Palomares, J. M.

2013-01-01

As embedded systems are becoming prevalent in everyday life, many universities are incorporating embedded systems-related courses in their undergraduate curricula. However, it is not easy to motivate students in such courses since they conceive of embedded systems as bizarre computing elements, different from the personal computers with which they…

Graphical qualities of educational technology: Using drag-and-drop and text-based programs for introductory computer science.

PubMed

DiSalvo, Betsy

2014-01-01

To determine appropriate computer science curricula, educators sought to better understand the different affordances of teaching with a visual programming language (Alice) or a text-based language (Jython). Although students often preferred one language, that language wasn't necessarily the one from which they learned the most.

Integrating IS Curriculum Knowledge through a Cluster-Computing Project--A Successful Experiment

ERIC Educational Resources Information Center

Kitchens, Fred L.; Sharma, Sushil K.; Harris, Thomas

2004-01-01

MIS curricula in business schools are challenged to provide MIS courses that give students a strong practical understanding of the basic technologies, while also providing enough hands-on experience to solve real life problems. As an experimental capstone MIS course, the authors developed a cluster-computing project to expose business students to…

Integrating interactive computational modeling in biology curricula.

PubMed

Helikar, Tomáš; Cutucache, Christine E; Dahlquist, Lauren M; Herek, Tyler A; Larson, Joshua J; Rogers, Jim A

2015-03-01

While the use of computer tools to simulate complex processes such as computer circuits is normal practice in fields like engineering, the majority of life sciences/biological sciences courses continue to rely on the traditional textbook and memorization approach. To address this issue, we explored the use of the Cell Collective platform as a novel, interactive, and evolving pedagogical tool to foster student engagement, creativity, and higher-level thinking. Cell Collective is a Web-based platform used to create and simulate dynamical models of various biological processes. Students can create models of cells, diseases, or pathways themselves or explore existing models. This technology was implemented in both undergraduate and graduate courses as a pilot study to determine the feasibility of such software at the university level. First, a new (In Silico Biology) class was developed to enable students to learn biology by "building and breaking it" via computer models and their simulations. This class and technology also provide a non-intimidating way to incorporate mathematical and computational concepts into a class with students who have a limited mathematical background. Second, we used the technology to mediate the use of simulations and modeling modules as a learning tool for traditional biological concepts, such as T cell differentiation or cell cycle regulation, in existing biology courses. Results of this pilot application suggest that there is promise in the use of computational modeling and software tools such as Cell Collective to provide new teaching methods in biology and contribute to the implementation of the "Vision and Change" call to action in undergraduate biology education by providing a hands-on approach to biology.

Australian engineering educators' attitudes towards Aboriginal cultures and perspectives

NASA Astrophysics Data System (ADS)

Goldfinch, Thomas; Prpic, Juliana Kaya; Jolly, Lesley; Leigh, Elyssebeth; Kennedy, Jade

2017-07-01

In Australia, representation of Aboriginal populations within the engineering profession is very low despite participation targets set by Government departments, professional bodies and Universities. Progressing the Aboriginal inclusion agenda within Australian Engineering Education requires a clearer understanding of engineering educators' preparedness for increased numbers of students from this non-traditional cohort. This research stems from a recently completed project that explored Aboriginal perspectives in engineering education and proposed a model for embedding perspectives in curricula. Nine engineering academics were interviewed to explore attitudes towards Aboriginal perspectives in engineering and the viability of the proposed model. Results of the interviews indicate efforts to embed Aboriginal perspectives are starting from a small base of knowledge and experience. Individuals' motivations and values indicate that there is significant support for improving this, but that efforts can be hampered by conceptions of Aboriginal perspectives that do not consider how Aboriginal knowledges may change engineering itself.

US nuclear engineering education: Status and prospects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

This study, conducted under the auspices of the Energy Engineering Board of the National Research Council, examines the status of and outlook for nuclear engineering education in the United States. The study resulted from a widely felt concern about the downward trends in student enrollments in nuclear engineering, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of US university nuclear engineering departments and programs, the aging of their faculties, the appropriateness of their curricula and research funding for industry and government needs, the availability of scholarships and research funding, and the increasing ratiomore » of foreign to US graduate students. A fundamental issue is whether the supply of nuclear engineering graduates will be adequate for the future. Although such issues are more general, pertaining to all areas of US science and engineering education, they are especially acute for nuclear engineering education. 30 refs., 12 figs., 20 tabs.« less

Preparing Dairy Technologists

ERIC Educational Resources Information Center

Sliva, William R.

1977-01-01

The size of modern dairy plant operations has led to extreme specialization in product manufacturing, milk processing, microbiological analysis, chemical and mathematical computations. Morrisville Agricultural and Technical College, New York, has modernized its curricula to meet these changes. (HD)

A Method for Assessing Required Course-Related Skills and Prerequisite Structure

ERIC Educational Resources Information Center

Johnson, Michael D.; Wang, Jyhwen

2015-01-01

Engineering curricula should be dynamic with a goal of constant improvement and refinement. Unfortunately, this is often not the case; courses are developed, altered, and expanded in a piecemeal manner. Namely, as time progresses many programmes end up with courses that are developed and not a developed curriculum. To remedy this shortcoming…

ViPLab: A Virtual Programming Laboratory for Mathematics and Engineering

ERIC Educational Resources Information Center

Richter, Thomas; Rudlof, Stephan; Adjibadji, B.; Bernlohr, Heiko; Gruninger, Christoph; Munz, Claus-Dieter; Stock, Andreas; Rohde, Christian; Helmig, Rainer

2012-01-01

Purpose: In the process of the implementation of the eBologna program and the recent change of the university system, curricula at German universities have been redesigned; courses have been condensed and learning content has been re-structured into modules, each of which requires an evaluation. Simultaneously, skills required for working in…

Biomedical imaging graduate curricula and courses: report from the 2005 Whitaker Biomedical Engineering Educational Summit.

PubMed

Louie, Angelique; Izatt, Joseph; Ferrara, Katherine

2006-02-01

We present an overview of graduate programs in biomedical imaging that are currently available in the US. Special attention is given to the emerging technologies of molecular imaging and biophotonics. Discussions from the workshop on Graduate Imaging at the 2005 Whitaker Educational Summit meeting are summarized.

Undergraduate Course and Curriculum Development Program and Calculus and the Bridge to Calculus Program: 1993 Awards.

ERIC Educational Resources Information Center

National Science Foundation, Arlington, VA. Div. of Undergraduate Education.

The Undergraduate Course and Curriculum Development Program of the National Science Foundation supports the development of courses in all disciplines to improve the quality of undergraduate courses and curricula in science, mathematics, engineering, and technology. The purpose of the program in Curriculum Development in Mathematics: Calculus and…

Is Knowing Another Language as Important as Knowing "Core" Subjects Like Mathematics or Science

ERIC Educational Resources Information Center

Kouritzin, Sandra G.

2012-01-01

This article explores, through interview data with 125 respondents in Canada, whether the study of foreign languages can be considered as important as the study of the "core" STEMM (science, technology, engineering, mathematics, medicine) subjects in school and university curricula. Five categories of interviewees, including those…

Math, Science, and Technology in the Early Grades

ERIC Educational Resources Information Center

Clements, Douglas H.; Sarama, Julie

2016-01-01

Do young children naturally develop the foundations of science, technology, engineering, and math (STEM)? And if so, should we build on these foundations by using STEM curricula in preschools? In this article, Douglas Clements and Julie Sarama argue that the answer to both these questions is yes. First, the authors show that young children possess…

Survey Exploring Views of Scientists on Current Trends in Chemistry Education

ERIC Educational Resources Information Center

Vamvakeros, Xenofon; Pavlatou, Evangelia A.; Spyrellis, Nicolas

2010-01-01

A survey exploring the views of scientists, chemists and chemical engineers, on current trends in Chemistry Education was conducted in Greece. Their opinions were investigated using a questionnaire focusing on curricula (the content and process of chemistry teaching and learning), as well as on the respondents' general educational beliefs and…

A Comparison Of The Air Force Institute Of Technology And Civilian Institutions Graduate Logistics Curricula

DTIC Science & Technology

2006-06-01

Reports America’s Best Graduate Schools for 2005. U.S. News and World Report’s rankings were based on inputs from business schools across America...top engineering and graduate business schools for courses in supply chain management” (Johnson and Pyke, 2000). Johnson and Pyke discuss the

Interdisciplinary Content, Contestations of Knowledge and Informational Transparency in Engineering Curriculum

ERIC Educational Resources Information Center

Barnard, Sarah; Hassan, Tarek; Dainty, Andrew; Bagilhole, Barbara

2013-01-01

With the introduction of key information sets (KIS) for all university programmes in the UK from 2012, the character, content and delivery of university degrees may be increasingly used by potential students to differentiate between degree programmes. Therefore, developments in curricula and the relationship to the profession are of growing…

A Rubric to Analyze Student Abilities to Engage in Sustainable Design

ERIC Educational Resources Information Center

Watson, Mary Katherine; Barrella, Elise; Wall, Thomas A.; Noyes, Caroline; Rodgers, Michael

2017-01-01

As engineering programs have begun to infuse sustainability into their undergraduate curricula, assessment tools are needed to further inform these reform efforts. The goal of this project was to demonstrate the use of a new rubric to examine students' abilities to engage in sustainable design. The rubric includes 16 sustainable design criteria…

Development of Problem Sets for K-12 and Engineering on Pharmaceutical Particulate Systems

ERIC Educational Resources Information Center

Savelski, Mariano J.; Slater, C. Stewart; Del Vecchio, Christopher A.; Kosteleski, Adrian J.; Wilson, Sarah A.

2010-01-01

Educational problem sets have been developed on structured organic particulate systems (SOPS) used in pharmaceutical technology. The sets present topics such as particle properties and powder flow and can be integrated into K-12 and college-level curricula. The materials educate students in specific areas of pharmaceutical particulate processing,…

Big Ideas at the Center for Innovation in Education at Thomas College

ERIC Educational Resources Information Center

Prawat, Ted

2016-01-01

Schools and teachers are looking for innovative ways to teach the "big ideas" emerging in the core curricula, especially in STEAM fields (science technology, engineering, arts and math). As a result, learning environments that support digital learning and educational technology on various platforms and devices are taking on…

Parental Perceptions of STEM Enrichment for Young Children

ERIC Educational Resources Information Center

Tay, Juliana; Salazar, Alissa; Lee, Hyeseong

2018-01-01

Most pre-kindergarten (pre-K) and kindergarten curricula are challenging and engaging, but few are strongly grounded in science, technology, engineering, and mathematics (STEM) education. In this study, the authors examined parental perception (N = 55) of the influences of a Saturday STEM enrichment program in one university center on pre-K and…

Automotive and Diesel Engine Rebuilding. COM-LINK. Competency Based Vocational Curricula with Basic Skills and Academic Linkages.

ERIC Educational Resources Information Center

Salvatore, Gerald

This competency-based module uses the Ocean County (New Jersey) Vocational-Technical Schools curriculum-infused model for infusing basic skills instruction into vocational education. The model demonstrates the relationship of vocational skills to communication, mathematics, and science. The document begins with a philosophy statement; preface; a…

Ondigita: A Platform for the Management and Delivery of Digital Documents

ERIC Educational Resources Information Center

Mazza, Riccardo; Baldassari, Andrea; Guidi, Roberto

2013-01-01

This paper presents Ondigita, a platform developed at the University of Applied Sciences of Southern Switzerland for the management and delivery of digital documents to students enrolled in bachelor's courses in various curricula within the field of engineering. Ondigita allows our organization to have a cloud-based repository of educational…

The Great Build-a-Buoy Challenge

ERIC Educational Resources Information Center

Dickerson, Daniel; Hathcock, Stephanie; Stonier, Frank; Levin, Doug

2012-01-01

As Science, Technology, Engineering, and Mathematics (STEM) Education continues to become more visible in elementary school curricula, the need for activities that address STEM content is growing. Build-A-Buoy is one such activity. This activity was developed by Doug Levin in 2008 when he was an education coordinator for the NOAA Chesapeake Bay…

The Cognitive Relevance of Indigenous and Rural: Why Is It Critical to Survival?

ERIC Educational Resources Information Center

Kassam, Karim-Aly S.; Avery, Leanne M.; Ruelle, Morgan L.

2017-01-01

Using two case studies of children's knowledge, this paper sheds light on the value, diversity, and necessity of Indigenous and place-based knowledge to science and engineering curricula in rural areas. Rural contexts are rich environments for cultivating contextual knowledge, hence framing a critical pedagogy of teaching and learning. Indigenous…

Expanding STEM Education | Poster

Cancer.gov

Editor’s note: This article is written as a reflection on experiential STEM education by a student who completed her Werner H. Kirsten internship in June 2015. Here, she advocates for incorporating hands-on experience into STEM curricula. If the only way for high school students to learn science, technology, engineering, and mathematics (STEM) is through textbooks, then count

What’s in a Prerequisite? A Mixed-Methods Approach to Identifying the Impact of a Prerequisite Course

PubMed Central

Sato, Brian K.; Lee, Amanda K.; Alam, Usman; Dang, Jennifer V.; Dacanay, Samantha J.; Morgado, Pedro; Pirino, Giorgia; Brunner, Jo Ellen; Castillo, Leanne A.; Chan, Valerie W.; Sandholtz, Judith H.

2017-01-01

Despite the ubiquity of prerequisites in undergraduate science, technology, engineering, and mathematics curricula, there has been minimal effort to assess their value in a data-driven manner. Using both quantitative and qualitative data, we examined the impact of prerequisites in the context of a microbiology lecture and lab course pairing. Through interviews and an online survey, students highlighted a number of positive attributes of prerequisites, including their role in knowledge acquisition, along with negative impacts, such as perhaps needlessly increasing time to degree and adding to the cost of education. We also identified a number of reasons why individuals do or do not enroll in prerequisite courses, many of which were not related to student learning. In our particular curriculum, students did not believe the microbiology lecture course impacted success in the lab, which agrees with our analysis of lab course performance using a previously established “familiarity” scale. These conclusions highlight the importance of soliciting and analyzing student feedback, and triangulating these data with quantitative performance metrics to assess the state of science, technology, engineering, and mathematics curricula. PMID:28232587

Evaluation of Computer-Aided Instruction in a Gross Anatomy Course: A Six-Year Study

ERIC Educational Resources Information Center

McNulty, John A.; Sonntag, Beth; Sinacore, James M.

2009-01-01

Web-based computer-aided instruction (CAI) has become increasingly important to medical curricula. This multi-year study investigated the effectiveness of CAI and the factors affecting level of individual use. Three CAI were tested that differed in specificity of applicability to the curriculum and in the level of student interaction with the CAI.…

The Development of an Educational Cloud for IS Curriculum through a Student-Run Data Center

ERIC Educational Resources Information Center

Hwang, Drew; Pike, Ron; Manson, Dan

2016-01-01

The industry-wide emphasis on cloud computing has created a new focus in Information Systems (IS) education. As the demand for graduates with adequate knowledge and skills in cloud computing is on the rise, IS educators are facing a challenge to integrate cloud technology into their curricula. Although public cloud tools and services are available…

Software Quality and Security in Teachers' and Students' Codes When Learning a New Programming Language

ERIC Educational Resources Information Center

Boutnaru, Shlomi; Hershkovitz, Arnon

2015-01-01

In recent years, schools (as well as universities) have added cyber security to their computer science curricula. This topic is still new for most of the current teachers, who would normally have a standard computer science background. Therefore the teachers are trained and then teaching their students what they have just learned. In order to…

Technology Needs for Teachers Web Development and Curriculum Adaptations

NASA Technical Reports Server (NTRS)

Carroll, Christy J.

1999-01-01

Computer-based mathematics and science curricula focusing on NASA inventions and technologies will enhance current teacher knowledge and skills. Materials and interactive software developed by educators will allow students to integrate their various courses, to work cooperatively, and to collaborate with both NASA scientists and students at other locations by using computer networks, email and the World Wide Web.

The Diffusion of Computer Skills in Communication Curricula: Is There a Gap between the Educational Experience and Employers' Needs?

ERIC Educational Resources Information Center

Chen, Joyce; Bankston, Ronnie

Computers are now perceived as a required resource by business, education, and government, as well as in personal life. The rates of adoption of information technologies among these groups (business, education, government, family/individual) have varied, which may have created knowledge gaps. Based on the data collected from a telephone survey in…

The Opinions of the Kindergarten Teachers in Relation to the Introduction of Computers to Nursery Schools: Preliminary Approach

ERIC Educational Resources Information Center

Sivropoulou, Irene; Tsapakidou, Aggeliki; Kiridis, Argyris

2009-01-01

Computers were introduced in Greek kindergartens of our country with the new curricula for kindergarten, "Inter-disciplinary Integrated Framework of Study Programs," ("Official Journal of the Hellenic Republic," 376 t.B/18-10-2001, article 6), in order to contribute to the spherical growth of children and to extend their…

An Instructional Note on Linear Programming--A Pedagogically Sound Approach.

ERIC Educational Resources Information Center

Mitchell, Richard

1998-01-01

Discusses the place of linear programming in college curricula and the advantages of using linear-programming software. Lists important characteristics of computer software used in linear programming for more effective teaching and learning. (ASK)

High Technology in the Vocational Areas.

ERIC Educational Resources Information Center

Ogletree, Earl; Etlinger, Leonard

1984-01-01

Presents a broad overview of the technological revolution and its impact on American business and industry, focusing on electronics and computers. Argues that high technology vocational programs must become a part of high school and college curricula. (KH)

Research.

ERIC Educational Resources Information Center

Bracey, Gerald W.

1984-01-01

This potpourri surveys research on various topics: neurologically based curricula, midafternoon slumps in student attention, accounting for contexts in research, feelings of powerlessness among students and teachers, further equity implications of computers in schools, misreporting of research findings, and accounting for media transfer in…

A study of female students enrollment in engineering technology stem programs

NASA Astrophysics Data System (ADS)

Habib, Ihab S.

The problem studied in this research project was the enrollment of female STEM Engineering Technology students and the impact of professional mentoring and financial incentives on their enrollment, retention, and completion of engineering curriculum. Several tasks were presented in researchers' professional position; to recruit more students to the program, especially female as a minority in the Engineering Technology Department, make appropriate changes to the curriculum, and make improvements in mentoring students to improve rates of enrollment, retention, and completion of the program. A survey was created to study the effects of Science Engineering Technology and Mathematics for Engineering Technology (STEM ENGT) students' perceptions, mentorship, and scholarships availability, enrollment, retention, and program completion by enrolled student gender. Other studies have discovered that more scholarship and faculty mentorship support provided for female students resulted in improved diversity within engineering curricula student bodies (Sorcinelli, 2007).

Current developments in the French engineering education system

NASA Astrophysics Data System (ADS)

Lemaître, Denis

2017-03-01

The French engineering education system has been established in quite a different way from others in Europe, such as the German and British systems, for instance. Due to both the whole state system and the private initiatives during the industrial revolution, the engineering education system today is composed of a large number (nearly 200) of rather small and specialised institutions, which have historically mostly developed outside universities. In the last decades, this system has had to face a powerful internationalisation movement. This has had major consequences on the curricula design, regarding foreign language teaching, international exchanges, and links with research. Currently, the French engineering education system is facing new challenges, regarding innovation and environmental and social issues, in a very competitive higher education context.

Synthesizing Results From Empirical Research on Computer-Based Scaffolding in STEM Education

PubMed Central

Belland, Brian R.; Walker, Andrew E.; Kim, Nam Ju; Lefler, Mason

2016-01-01

Computer-based scaffolding assists students as they generate solutions to complex problems, goals, or tasks, helping increase and integrate their higher order skills in the process. However, despite decades of research on scaffolding in STEM (science, technology, engineering, and mathematics) education, no existing comprehensive meta-analysis has synthesized the results of these studies. This review addresses that need by synthesizing the results of 144 experimental studies (333 outcomes) on the effects of computer-based scaffolding designed to assist the full range of STEM learners (primary through adult education) as they navigated ill-structured, problem-centered curricula. Results of our random effect meta-analysis (a) indicate that computer-based scaffolding showed a consistently positive (ḡ = 0.46) effect on cognitive outcomes across various contexts of use, scaffolding characteristics, and levels of assessment and (b) shed light on many scaffolding debates, including the roles of customization (i.e., fading and adding) and context-specific support. Specifically, scaffolding’s influence on cognitive outcomes did not vary on the basis of context-specificity, presence or absence of scaffolding change, and logic by which scaffolding change is implemented. Scaffolding’s influence was greatest when measured at the principles level and among adult learners. Still scaffolding’s effect was substantial and significantly greater than zero across all age groups and assessment levels. These results suggest that scaffolding is a highly effective intervention across levels of different characteristics and can largely be designed in many different ways while still being highly effective. PMID:28344365

Synthesizing Results From Empirical Research on Computer-Based Scaffolding in STEM Education: A Meta-Analysis.

PubMed

Belland, Brian R; Walker, Andrew E; Kim, Nam Ju; Lefler, Mason

2017-04-01

Computer-based scaffolding assists students as they generate solutions to complex problems, goals, or tasks, helping increase and integrate their higher order skills in the process. However, despite decades of research on scaffolding in STEM (science, technology, engineering, and mathematics) education, no existing comprehensive meta-analysis has synthesized the results of these studies. This review addresses that need by synthesizing the results of 144 experimental studies (333 outcomes) on the effects of computer-based scaffolding designed to assist the full range of STEM learners (primary through adult education) as they navigated ill-structured, problem-centered curricula. Results of our random effect meta-analysis (a) indicate that computer-based scaffolding showed a consistently positive (ḡ = 0.46) effect on cognitive outcomes across various contexts of use, scaffolding characteristics, and levels of assessment and (b) shed light on many scaffolding debates, including the roles of customization (i.e., fading and adding) and context-specific support. Specifically, scaffolding's influence on cognitive outcomes did not vary on the basis of context-specificity, presence or absence of scaffolding change, and logic by which scaffolding change is implemented. Scaffolding's influence was greatest when measured at the principles level and among adult learners. Still scaffolding's effect was substantial and significantly greater than zero across all age groups and assessment levels. These results suggest that scaffolding is a highly effective intervention across levels of different characteristics and can largely be designed in many different ways while still being highly effective.

Integrating Intelligent Systems Domain Knowledge Into the Earth Science Curricula

NASA Astrophysics Data System (ADS)

Güereque, M.; Pennington, D. D.; Pierce, S. A.

2017-12-01

High-volume heterogeneous datasets are becoming ubiquitous, migrating to center stage over the last ten years and transcending the boundaries of computationally intensive disciplines into the mainstream, becoming a fundamental part of every science discipline. Despite the fact that large datasets are now pervasive across industries and academic disciplines, the array of skills is generally absent from earth science programs. This has left the bulk of the student population without access to curricula that systematically teach appropriate intelligent-systems skills, creating a void for skill sets that should be universal given their need and marketability. While some guidance regarding appropriate computational thinking and pedagogy is appearing, there exist few examples where these have been specifically designed and tested within the earth science domain. Furthermore, best practices from learning science have not yet been widely tested for developing intelligent systems-thinking skills. This research developed and tested evidence based computational skill modules that target this deficit with the intention of informing the earth science community as it continues to incorporate intelligent systems techniques and reasoning into its research and classrooms.

Military Curricula for Vocational & Technical Education. General Purpose Vehicle Mechanic, Blocks IV-V, 8-11.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This plan of instruction, lesson plans, and student materials (programed texts, workbooks, and study guides) for a secondary-postsecondary level course in engine mechanics is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. It is the third…

The Connection to the 21st Century Workforce: Technology and Engineering Education

ERIC Educational Resources Information Center

International Technology and Engineering Educators Association, 2011

2011-01-01

Building a competitive workforce for the 21st Century requires the careful alignment of K-12 and university curricula with the skill needs of business and industry. In addition to making students better problem solvers, critical thinkers, and users of technology, academic preparation must instill in them the desire to become lifelong learners,…

Military Curricula for Vocational & Technical Education. General Purpose Vehicle Mechanic, Block III, 8-10.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This plan of instruction, lesson plans, and student materials (study guides, workbooks, and programed texts) for a secondary-postsecondary level course in engine mechanics is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. It is the second…

Development of Mechanical Engineering Curricula at the University of Minho

ERIC Educational Resources Information Center

Teixeira, Jose Carlos Fernandes; da Silva, Jaime Ferreira; Flores, Paulo

2007-01-01

The implementation of the Bologna protocol in the European Union has set new goals for the whole higher education system as: (a) a quality assessment for university courses; (b) a framework for the exchange of students and academics; and (c) an opportunity for changing the teaching/learning procedures and methodologies. Within the context, the…

What's in a Prerequisite? A Mixed-Methods Approach to Identifying the Impact of a Prerequisite Course

ERIC Educational Resources Information Center

Sato, Brian K.; Lee, Amanda K.; Alam, Usman; Dang, Jennifer V.; Dacanay, Samantha J.; Morgado, Pedro; Pirino, Giorgia; Brunner, Jo Ellen; Castillo, Leanne A.; Chan, Valerie W.; Sandholtz, Judith H.

2017-01-01

Despite the ubiquity of prerequisites in undergraduate science, technology, engineering, and mathematics curricula, there has been minimal effort to assess their value in a data-driven manner. Using both quantitative and qualitative data, we examined the impact of prerequisites in the context of a microbiology lecture and lab course pairing.…

The Virtual Steel Sculpture--Limit State Analyses and Applications of Steel Connections

ERIC Educational Resources Information Center

Chou, Karen C.; Moaveni, Saeed; Sapp, James D.

2017-01-01

The integrity of a structural system depends on the strength of materials, shape of the individual member and the elements used to hold the members together. In most undergraduate civil engineering curricula, a structural steel and/or reinforced concrete design course is required. Usually, the main focus of these courses is on member selection…

An International Comparison of Final-Year Design Project Curricula

ERIC Educational Resources Information Center

Kentish, Sandra E.; Shallcross, David C.

2006-01-01

This paper reviews design teaching at a total of 15 chemical engineering departments across Australia, Singapore, and the United Kingdom. The emphasis is on the capstone Design Project, which can be viewed as a major transition subject for students as they move into the workplace. The study shows that this subject has evolved to act as an…

Designing a Site to Embed and to Interact with Wolfram Alpha Widgets in Math and Sciences Courses

ERIC Educational Resources Information Center

Cepeda, Francisco Javier Delgado; Acosta, Ruben Dario Santiago

2014-01-01

This paper reports design and implementation outcomes at middle development advance of an educative program based on use and construction of widgets on Wolfram Alpha platform at higher education level for engineering and sciences areas. Widgets were based on Physics and Mathematics curricula under Project Oriented Learning and Blended Learning…

Jumping on the STEM Bandwagon: How Middle Grades Students and Teachers Can Benefit from STEM Experiences

ERIC Educational Resources Information Center

Lesseig, Kristin; Slavit, David; Nelson, Tamara Holmlund

2017-01-01

Given the current emphasis on science, technology, engineering, and math (STEM) education and its key attributes, middle school is an optimal time to implement STEM-based curricula. However, the interdisciplinary and open-ended nature of STEM projects often makes implementation difficult. In this article, we describe a professional development…

Tracing Professional Proficiencies Back to Curricula in Professional Education: A Content Validation Based on the Convergent Validity of Multiple Job Analysis Measures.

ERIC Educational Resources Information Center

Burgar, Paul S.

A study was commissioned by a large petrochemical concern in order to validate professional degrees as a job entry requirement. The investigations considered two issues: (1) "Are activities performed by professionals (chemists and engineers) measurably different from the activities of subordinate technical personnel?" and "What…

A Systematic Review of Developing Team Competencies in Information Systems Education

ERIC Educational Resources Information Center

Figl, Kathrin

2010-01-01

The ability to work effectively in teams has been a key competence for information systems engineers for a long time. Gradually, more attention is being paid to developing this generic competence as part of academic curricula, resulting in two questions: how to best promote team competencies and how to implement team projects successfully. These…

Curriculum Planning for the Development of Graphicacy Capability: Three Case Studies from Europe and the USA

ERIC Educational Resources Information Center

Danos, Xenia; Barr, Ronald; Górska, Renata; Norman, Eddie

2014-01-01

Curriculum planning for the development of graphicacy capability has not been systematically included in general education to coincide with the graphicacy needs of human society. In higher education, graphicacy curricula have been developed to meet the needs of certain disciplines, for example medical and teacher training and engineering, among…

Closing the Loop: Involving Faculty in the Assessment of Scientific and Quantitative Reasoning Skills of Biology Majors

ERIC Educational Resources Information Center

Hurney, Carol A.; Brown, Justin; Griscom, Heather Peckham; Kancler, Erika; Wigtil, Clifton J.; Sundre, Donna

2011-01-01

The development of scientific and quantitative reasoning skills in undergraduates majoring in science, technology, engineering, and mathematics (STEM) is an objective of many courses and curricula. The Biology Department at James Madison University (JMU) assesses these essential skills in graduating biology majors by using a multiple-choice exam…

Analysis of Korean Elementary Pre-Service Teachers' Changing Attitudes about Integrated STEAM Pedagogy through Developing Lesson Plans

ERIC Educational Resources Information Center

Kim, Dongryeul; Bolger, Molly

2017-01-01

Integrated curricula have become a major educational focus in Korea. Policy changes began in 2009 when the Korea Ministry of Education, Science, and Technology announced a new curriculum incorporating Science, Technology, Engineering, Arts, and Mathematics (STEAM). Various stages of educational reform have occurred since that time. This study…

Computers as learning resources in the health sciences: impact and issues.

PubMed Central

Ellis, L B; Hannigan, G G

1986-01-01

Starting with two computer terminals in 1972, the Health Sciences Learning Resources Center of the University of Minnesota Bio-Medical Library expanded its instructional facilities to ten terminals and thirty-five microcomputers by 1985. Computer use accounted for 28% of total center circulation. The impact of these resources on health sciences curricula is described and issues related to use, support, and planning are raised and discussed. Judged by their acceptance and educational value, computers are successful health sciences learning resources at the University of Minnesota. PMID:3518843

A Computer-Based Network for Writing Process Instruction of At-Risk Community College Students: A Second Year Evaluation.

ERIC Educational Resources Information Center

Balajthy, Ernest

In its second year of operation (1988-1989 academic year), the Electronic Writing Center (EWC) of the Union County College in Cranford, New Jersey has expanded its capabilities and the amount of service it provides to at-risk students through the Computers in the Curricula Project. Major changes include: (1) increased numbers of classes and…

Mission leverage education: NSU/NASA innovative undergraduate model

NASA Technical Reports Server (NTRS)

Chaudhury, S. Raj; Shaw, Paula R. D.

2005-01-01

The BEST Lab (Center for Excellence in Science Education), the Center for Materials Research (CMR), and the Chemistry, Mathematics, Physics, and Computer Science (CS) Departments at Norfolk State University (NSU) joined forces to implement MiLEN(2) IUM - an innovative approach tu integrate current and emerging research into the undergraduate curricula and train students on NASA-related fields. An Earth Observing System (EOS) mission was simulated where students are educated and trained in many aspects of Remote Sensing: detector physics and spectroscopy; signal processing; data conditioning, analysis, visualization; and atmospheric science. This model and its continued impact is expected to significantly enhance the quality of the Mathematics, Science, Engineering and Technology (MSET or SMET) educational experience and to inspire students from historically underrepresented groups to pursue careers in NASA-related fields. MiLEN(2) IUM will be applicable to other higher education institutions that are willing to make the commitment to this endeavor in terms of faculty interest and space.

Simulation in Occupational Therapy Curricula: A literature review.

PubMed

Bennett, Sally; Rodger, Sylvia; Fitzgerald, Cate; Gibson, Libby

2017-08-01

Simulated learning experiences are increasingly being used in health-care education to enhance student engagement and provide experiences that reflect clinical practice; however, simulation has not been widely investigated in occupational therapy curricula. The aim of this paper was to: (i) describe the existing research about the use and evaluation of simulation over the last three decades in occupational therapy curricula and (ii) consider how simulation has been used to develop competence in students. A literature review was undertaken with searches of MEDLINE, CINAHL and ERIC to locate articles that described or evaluated the use of simulation in occupational therapy curricula. Fifty-seven papers were identified. Occupational therapy educators have used the full scope of simulation modalities, including written case studies (22), standardised patients (13), video case studies (15), computer-based and virtual reality cases (7), role-play (8) and mannequins and part-task trainers (4). Ten studies used combinations of these modalities and two papers compared modalities. Most papers described the use of simulation for foundational courses, as for preparation for fieldwork, and to address competencies necessary for newly graduating therapists. The majority of studies were descriptive, used pre-post design, or were student's perceptions of the value of simulation. Simulation-based education has been used for a wide range of purposes in occupational therapy curricula and appears to be well received. Randomised controlled trials are needed to more accurately understand the effects of simulation not just for occupational therapy students but for longer term outcomes in clinical practice. © 2017 Occupational Therapy Australia.

Biomimicry, Biofabrication, and Biohybrid Systems: The Emergence and Evolution of Biological Design.

PubMed

Raman, Ritu; Bashir, Rashid

2017-10-01

The discipline of biological design has a relatively short history, but has undergone very rapid expansion and development over that time. This Progress Report outlines the evolution of this field from biomimicry to biofabrication to biohybrid systems' design, showcasing how each subfield incorporates bioinspired dynamic adaptation into engineered systems. Ethical implications of biological design are discussed, with an emphasis on establishing responsible practices for engineering non-natural or hypernatural functional behaviors in biohybrid systems. This report concludes with recommendations for implementing biological design into educational curricula, ensuring effective and responsible practices for the next generation of engineers and scientists. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Engineering education in 21st century

NASA Astrophysics Data System (ADS)

Alam, Firoz; Sarkar, Rashid; La Brooy, Roger; Chowdhury, Harun

2016-07-01

The internationalization of engineering curricula and engineering practices has begun in Europe, Anglosphere (English speaking) nations and Asian emerging economies through the Bologna Process and International Engineering Alliance (Washington Accord). Both the Bologna Process and the Washington Accord have introduced standardized outcome based engineering competencies and frameworks for the attainment of these competencies by restructuring existing and undertaking some new measures for an intelligent adaptation of the engineering curriculum and pedagogy. Thus graduates with such standardized outcome based curriculum can move freely as professional engineers with mutual recognition within member nations. Despite having similar or near similar curriculum, Bangladeshi engineering graduates currently cannot get mutual recognition in nations of Washington Accord and the Bologna Process due to the non-compliance of outcome based curriculum and pedagogy. This paper emphasizes the steps that are required to undertake by the engineering educational institutions and the professional body in Bangladesh to make the engineering competencies, curriculum and pedagogy compliant to the global engineering alliance. Achieving such compliance will usher in a new era for the global mobility and global engagement by Bangladesh trained engineering graduates.

US Nuclear Engineering Education: Status and prospects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

This study, conducted under the auspices of the Energy Engineering Board of the National Research Council, examines the status of and outlook for nuclear engineering education in the United States. The study, as described in this report resulted from a widely felt concern about the downward trends in student enrollments in nuclear engineering, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of US university nuclear engineering departments and programs, the ageing of their faculties, the appropriateness of their curricula and research funding for industry and government needs, the availability of scholarships and researchmore » funding, and the increasing ratio of foreign to US graduate students. A fundamental issue is whether the supply of nuclear engineering graduates will be adequate for the future. Although such issues are more general, pertaining to all areas of US science and engineering education, they are especially acute for nuclear engineering education. 30 refs., 24 figs., 49 tabs.« less

The influence of engineers' training models on ethics and civic education component in engineering courses in Portugal

NASA Astrophysics Data System (ADS)

Monteiro, Fátima; Leite, Carlinda; Rocha, Cristina

2017-03-01

The recognition of the need and importance of including ethical and civic education in engineering courses, as well as the training profile on ethical issues, relies heavily on the engineer's concept and the perception of the engineering action. These views are strongly related to the different engineer education model conceptions and its historical roots. In Portugal, engineer education is done based on two different higher education subsystems, the university and the polytechnic. This study analyses how engineers' educational models, present in the two Portuguese higher education subsystems, influence and are reflected in the importance attached to students' ethic and civic education and in the role that this training plays. Although the data suggest the prevalence of the distinction between the two training models and the corresponding distinction of ethic and civic education that is incorporated in the curricula, it is also noted the existence of mixed feature courses in university education.

Comparison of engagement with ethics between an engineering and a business program.

PubMed

Culver, Steven M; Puri, Ishwar K; Wokutch, Richard E; Lohani, Vinod

2013-06-01

Increasing university students' engagement with ethics is becoming a prominent call to action for higher education institutions, particularly professional schools like business and engineering. This paper provides an examination of student attitudes regarding ethics and their perceptions of ethics coverage in the curriculum at one institution. A particular focus is the comparison between results in the business college, which has incorporated ethics in the curriculum and has been involved in ethics education for a longer period, with the engineering college, which is in the nascent stages of developing ethics education in its courses. Results show that student attitudes and perceptions are related to the curriculum. In addition, results indicate that it might be useful for engineering faculty to use business faculty as resources in the development of their ethics curricula.

Biological issues in materials science and engineering: Interdisciplinarity and the bio-materials paradigm

NASA Astrophysics Data System (ADS)

Murr, L. E.

2006-07-01

Biological systems and processes have had, and continue to have, important implications and applications in materials extraction, processing, and performance. This paper illustrates some interdisciplinary, biological issues in materials science and engineering. These include metal extraction involving bacterial catalysis, galvanic couples, bacterial-assisted corrosion and degradation of materials, biosorption and bioremediation of toxic and other heavy metals, metal and material implants and prostheses and related dental and medical biomaterials developments and applications, nanomaterials health benefits and toxicity issue, and biomimetics and biologically inspired materials developments. These and other examples provide compelling evidence and arguments for emphasizing biological sicences in materials science and engineering curricula and the implementation of a bio-materials paradigm to facilitate the emergence of innovative interdisciplinarity involving the biological sciences and materials sciences and engineering.

Learning motion concepts using real-time microcomputer-based laboratory tools

NASA Astrophysics Data System (ADS)

Thornton, Ronald K.; Sokoloff, David R.

1990-09-01

Microcomputer-based laboratory (MBL) tools have been developed which interface to Apple II and Macintosh computers. Students use these tools to collect physical data that are graphed in real time and then can be manipulated and analyzed. The MBL tools have made possible discovery-based laboratory curricula that embody results from educational research. These curricula allow students to take an active role in their learning and encourage them to construct physical knowledge from observation of the physical world. The curricula encourage collaborative learning by taking advantage of the fact that MBL tools present data in an immediately understandable graphical form. This article describes one of the tools—the motion detector (hardware and software)—and the kinematics curriculum. The effectiveness of this curriculum compared to traditional college and university methods for helping students learn basic kinematics concepts has been evaluated by pre- and post-testing and by observation. There is strong evidence for significantly improved learning and retention by students who used the MBL materials, compared to those taught in lecture.

Woodworking Technology.

ERIC Educational Resources Information Center

Kirk, Albert S.; And Others

1991-01-01

Three articles discuss the importance of wood processing to manufacturing and construction industries and the need for progressive change in the curriculum; the evolution of wood-based synthetic panel materials; and the technological advances in the computer control of machine tools and their incorporation into wood technology curricula. (JOW)

PLATO IV Accountancy Index.

ERIC Educational Resources Information Center

Pondy, Dorothy, Comp.

The catalog was compiled to assist instructors in planning community college and university curricula using the 48 computer-assisted accountancy lessons available on PLATO IV (Programmed Logic for Automatic Teaching Operation) for first semester accounting courses. It contains information on lesson access, lists of acceptable abbreviations for…

Use of Simulation Learning Experiences in Physical Therapy Entry-to-Practice Curricula: A Systematic Review

PubMed Central

Carnahan, Heather; Herold, Jodi

2015-01-01

ABSTRACT Purpose: To review the literature on simulation-based learning experiences and to examine their potential to have a positive impact on physiotherapy (PT) learners' knowledge, skills, and attitudes in entry-to-practice curricula. Method: A systematic literature search was conducted in the MEDLINE, CINAHL, Embase Classic+Embase, Scopus, and Web of Science databases, using keywords such as physical therapy, simulation, education, and students. Results: A total of 820 abstracts were screened, and 23 articles were included in the systematic review. While there were few randomized controlled trials with validated outcome measures, some discoveries about simulation can positively affect the design of the PT entry-to-practice curricula. Using simulators to provide specific output feedback can help students learn specific skills. Computer simulations can also augment students' learning experience. Human simulation experiences in managing the acute patient in the ICU are well received by students, positively influence their confidence, and decrease their anxiety. There is evidence that simulated learning environments can replace a portion of a full-time 4-week clinical rotation without impairing learning. Conclusions: Simulation-based learning activities are being effectively incorporated into PT curricula. More rigorously designed experimental studies that include a cost–benefit analysis are necessary to help curriculum developers make informed choices in curriculum design. PMID:25931672

Career and Technical Education (CTE) Directors' Experiences with CTE's Contributions to Science, Technology, Engineering, and Math (STEM) Education Implementation

ERIC Educational Resources Information Center

Nkhata, Bentry

2013-01-01

In spite of the large overlap in the goals of CTE and STEM education, there is little evidence of the role(s) CTE delivery systems, programs, curricula, or pedagogical strategies can play in advancing STEM education. Because of their responsibilities, especially for organizational and instructional leadership, school district CTE directors could…

Draft SEI Program Plans: 1994-1998

DTIC Science & Technology

1993-08-01

process must depersonalize risks so they are viewed as opportunities for program success. Factors for communication are in all the method devel...and the undergraduate level to adequately prepare new soft- ware engineers entering the work force. Educators and trainers of current professionals...learning opportu- nities. The technical foundation for many of these products is the evolving SEI model curricula for graduate and undergraduate degree

Fostering Entrepreneurship Education in Engineering Curricula in Greece. Experience and Challenges for a Technical University

ERIC Educational Resources Information Center

Papayannakis, L.; Kastelli, I.; Damigos, D.; Mavrotas, G.

2008-01-01

While entrepreneurship has emerged as an important mechanism for the generation of social returns in terms of economic growth and job creation, entrepreneurship education is still something new in Europe and the debate about the need and the way of introduction of specific entrepreneurship courses in higher education is on going. This paper deals…

Collection Assessment in Response to Changing Curricula: An Analysis of the Biotechnology Resources at the University of Colorado at Boulder

ERIC Educational Resources Information Center

Wiersma, Gabrielle

2010-01-01

Increasing demand for biotechnology and biomedical resources prompted the Engineering Library at the University of Colorado at Boulder (UCB) to complete a collection assessment of the journals, books, and other resources provided by the University Libraries. This paper presents a variety of methods for evaluating library collections and describes…

Overview of a Systematic Effort to Engineer and Monitor Curriculum Change: Emerging Guidelines and Encouraging Findings for Curriculum Installers.

ERIC Educational Resources Information Center

Mahan, James M.

This paper (1) describes 4-year efforts of the Eastern Regional Institute for Education (ERIE) to promote use of various process-oriented curricula in over 50 New York State and Pennsylvania school districts; and (2) presents guidelines for curriculum installers based on documented successes and failures in participating schools. (Author/LLR)

Military Curricula for Vocational & Technical Education. General Purpose Vehicle Mechanic. Blocks I and II, 8-9.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This plan of instruction, lesson plans, student handouts, and programed texts for a secondary-postsecondary level course in engine mechanics is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. It is the first of a four-part course (see Note…

Military Curricula for Vocational & Technical Education. General Purpose Vehicle Mechanic, Blocks VI & VII, 8-12.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This plan of instruction, lesson plans, student study guides, and programed texts for a secondary-postsecondary level course in engine mechanics is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. It is the fourth of a four-part course (see…

Multidisciplinary Perspectives on a Video Case of Children Designing and Coding for Robotics

ERIC Educational Resources Information Center

Francis, Krista; Bruce, Cathy; Davis, Brent; Drefs, Michelle; Hallowell, David; Hawes, Zachary; McGarvey, Lynn; Moss, Joan; Mulligan, Joanne; Okamoto, Yukari; Sinclair, Nathalie; Whiteley, Walter; Woolcott, Geoff

2017-01-01

Spatial reasoning plays a vital role in choice of and success in science, technology, engineering, and mathematics (STEM) careers, yet the topic is scarce in grade school curricula. We conjecture that this absence may be due to limited knowledge of how spatial reasoning is discussed and engaged across STEM professions. This study aimed to address…

Re?Engineering of Undergraduate Science Curricula to Emphasise Development of Lifelong Learning Skills

ERIC Educational Resources Information Center

Peat, Mary; Taylor, Charlotte E.; Franklin, Sue

2005-01-01

It is increasingly important in the twenty-first century for graduates to be able to take their place in the changing world scene and to be adaptable and creative within the organisation that employs them. This paper describes some of the initiatives introduced into the curriculum of a first-year science course, taken by 1300 students at the…

`Human nature': Chemical engineering students' ideas about human relationships with the natural world

NASA Astrophysics Data System (ADS)

Goldman, Daphne; Ben-Zvi Assaraf, Orit; Shemesh, Julia

2014-05-01

While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The study was conducted with 247 3rd-4th year chemical engineering students in Israeli Universities. It employed the New Ecological Paradigm (NEP)-questionnaire to which students added written explanations. Quantitative analysis of NEP-scale results shows that the students demonstrated moderately ecocentric orientation. Explanations to the NEP-items reveal diverse, ambivalent ideas regarding the notions embodied in the NEP, strong scientific orientation and reliance on technology for addressing environmental challenges. Endorsing sustainability implies that today's engineers be equipped with an ecological perspective. The capacity of Higher Education to enable engineers to develop dispositions about human-nature interrelationships requires adaptation of curricula towards multidisciplinary, integrative learning addressing social-political-economic-ethical perspectives, and implementing critical-thinking within the socio-scientific issues pedagogical approach.

A survey of anthropometry and physical accommodation in ergonomics curricula.

PubMed

Garneau, Christopher J; Parkinson, Matthew B

2016-01-01

The size and shape of users are an important consideration for many products and environments. Designers and engineers in many disciplines must often accommodate these attributes to meet objectives such as fit and safety. When practitioners have academic training in addressing these issues, it is typically through courses in Human Factors/Ergonomics (HF/E). This paper investigates education related to physical accommodation and offers suggestions for improvement. A survey was conducted wherein 21 instructors at 18 universities in the United States provided syllabi for 29 courses, which were analysed to determine topics related to anthropometry and resources used for the courses. The results show that within the U.S., anthropometry is covered in the majority of courses discussing physical ergonomics, but important related concepts were often omitted (e.g., digital human modelling, multivariate accommodation and variability across global populations). Curricula could be improved by incorporating more accurate anthropometry, multivariate problems and interactive online tools. This paper describes a study investigating collegiate ergonomics courses within the U.S. in the area of physical accommodation. Course schedules and texts were studied for their treatment of several topics related to accommodating the spatial requirements (anthropometry) of users. Recommendations are made for improving course curricula.

Conceptual design of a Mars transportation system

NASA Astrophysics Data System (ADS)

1992-08-01

In conjunction with NASA Marshall Space Flight Center and several major aerospace corporations the University of Minnesota has developed a scenario to place humans on Mars by the year 2016. The project took the form of a year-long design course in the senior design curricula at the University's Aerospace Engineering and Mechanics Department. Students worked with the instructor, teaching assistants and engineers in industry to develop a vehicle and the associated mission profile to fulfill the requirements of the Mars Transportation System. This report is a summary of the final design and the process though which the final product was developed.

Conceptual design of a Mars transportation system

NASA Technical Reports Server (NTRS)

1992-01-01

In conjunction with NASA Marshall Space Flight Center and several major aerospace corporations the University of Minnesota has developed a scenario to place humans on Mars by the year 2016. The project took the form of a year-long design course in the senior design curricula at the University's Aerospace Engineering and Mechanics Department. Students worked with the instructor, teaching assistants and engineers in industry to develop a vehicle and the associated mission profile to fulfill the requirements of the Mars Transportation System. This report is a summary of the final design and the process though which the final product was developed.

The Dynamic Discograph.

ERIC Educational Resources Information Center

Bell, Garry

1991-01-01

Mechanical devices offer an alternative to computers to explore mathematical concepts in different curricula areas. Described is the discograph, a series of pulleys and wheels, that can be used to teach mathematical principles in pattern drawing, locus, rotation in geared systems, gearing, rotational symmetry, regular plane figures, decimal, and…

ThinkerTools. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2012

2012-01-01

"ThinkerTools" is a computer-based program that aims to develop students' understanding of physics and scientific modeling. The program is composed of two curricula for middle school students, "ThinkerTools Inquiry" and "Model-Enhanced ThinkerTools". "ThinkerTools Inquiry" allows students to explore the…

Instructional Technology: The Third Wave.

ERIC Educational Resources Information Center

Holcomb, Terry L.

1989-01-01

Discussion of changing curricula in higher education focuses on a new curriculum design for intermedia specialists that should evolve from the more traditional field of instructional technology. The need for appropriate undergraduate and practical experience is considered, and courses that combine computer education, cognitive systems, and other…

A Report on the Present Status of Engineering Mathematics Test (EMaT)

NASA Astrophysics Data System (ADS)

Watanabe, Toshimasa; Takafuji, Daisuke

The aim of Engineering Mathematics Test (EMaT) is to make sure what essentials in curriculum of Engineering Mathematics is, and to assess university students’ core academic competence and achievement of Engineering Mathematics, helping assurance of students’ academic ability. It is useful for professors to evaluate teaching effect of the classes, and this evaluation would help them improve curricula. Scores can be available for both graduate school entrance examinations and employment tests, leading to selecting persons with basic academic ability in Engineering Mathematics. The scope includes fundamentals in Calculus, Linear Algebra, Differential Equations, and Probability and Statistics. It is open to all students free of charge, and is annually given once in December. In 2007, 2,396 students from 35 universities took EMaT, and the total number of students who have taken EMaT in these 5 years is 6,240.

Medical Student Preferences for Self-Directed Study Resources in Gross Anatomy

ERIC Educational Resources Information Center

Choi-Lundberg, Derek L.; Low, Tze Feng; Patman, Phillip; Turner, Paul; Sinha, Sankar N.

2016-01-01

Gross anatomy instruction in medical curricula involve a range of resources and activities including dissection, prosected specimens, anatomical models, radiological images, surface anatomy, textbooks, atlases, and computer-assisted learning (CAL). These resources and activities are underpinned by the expectation that students will actively engage…

Destination Math. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

"Destination Math" is a series of computer-based curricula designed to be used for at least 90 minutes a week. Featuring sequenced, prescriptive, step-by-step instruction, "Destination Math" is designed for the development of fluency in critical skills, math reasoning, conceptual understanding, and problem-solving skills.…

Substance Use Prevention Project.

ERIC Educational Resources Information Center

Simmons, Judy

This report outlines the Hillsborough County, Florida, Head Start Program's project to field test with young children and their families curricula that were designed to prevent alcohol and other drug problems. A national search conducted by means of computers, individual contacts, and other methods yielded information on 22 substance abuse…

Impact of Curriculum Revision on Media Collection.

ERIC Educational Resources Information Center

Etter, Zana C.

1995-01-01

Changes in medical school curricula and teaching approach have led to an increased use in computer courseware and other technology. The traditional audiovisual library serving medical school students must redefine the role of the information provider to include helping students navigate networks; choosing and evaluating instructional materials;…

Melissa's Year in Sixth Grade: A Technology Integration Vignette.

ERIC Educational Resources Information Center

Hemmer, Jeanie

1998-01-01

In 1995, rather than require seventh-grade computer literacy classes, Texas allowed school districts to integrate technology skills into curricula. This article, the first of three, describes technology integration for sixth grade. Includes unit ideas on nations; the Holocaust; Olympic diving; Christmas; probability; organisms; Antarctica;…

A Killer Asteroids Research Project for Undergraduate Non-Majors

NASA Astrophysics Data System (ADS)

Puckett, Andrew W.; Rector, T. A.

2009-01-01

We present a progress report on the development and testing of our Killer Asteroids Research Project, which enables the assessment of asteroid impact risk in the undergraduate classroom. This is part of an NSF CCLI grant to develop Research Based Science Education (RBSE) curricula for non-majors. Our curricula include six projects covering astrometric, photometric, and spectroscopic techniques, which are being tested at multiple schools of varying sizes around the country. We report on the second semester of testing this project with undergraduates at the University of Alaska Anchorage. Students use our Polaris Plugin for ImageJ to perform both astrometry and aperture photometry on research-grade astronomical images. The output is fed into Find_Orb, which uses a Monte Carlo method to compute orbital elements for thousands of possible orbits. The resulting orbit database is then fed into a planetarium program, which allows students to visualize the uncertainty region and to observe how that region changes with time and/or additional data. For potentially hazardous asteroids, impact risk is assessed by counting the number of "clone” orbits that strike a planet's surface. Alternatively, the output from our plugin can be used directly to measure the lightcurves of minor planets, leading to an improved understanding of their shapes. This plugin is the first FITS reader to produce correct time-stamps for minor planet observations found in the SDSS, which observes in drift-scan mode. Recent progress is promising. We are in dialogue with software engineers behind both Starry Night and Guide, helping to improve these planetarium programs as research tools. We are also constantly improving the Polaris Plugin, most recently to make it compatible with the astrometry format used by the websites NeoDys and AstDys.

PRiME: integrating professional responsibility into the engineering curriculum.

PubMed

Moore, Christy; Hart, Hillary; Randall, D'Arcy; Nichols, Steven P

2006-04-01

Engineering educators have long discussed the need to teach professional responsibility and the social context of engineering without adding to overcrowded curricula. One difficulty we face is the lack of appropriate teaching materials that can fit into existing courses. The PRiME (Professional Responsibility Modules for Engineering) Project (http://www.engr.utexas.edu/ethics/primeModules.cfm) described in this paper was initiated at the University of Texas, Austin to provide web-based modules that could be integrated into any undergraduate engineering class. Using HPL (How People Learn) theory, PRiME developed and piloted four modules during the academic year 2004-2005. This article introduces the modules and the pilot, outlines the assessment process, analyzes the results, and describes how the modules are being revised in light of the initial assessment. In its first year of development and testing, PRiME made significant progress towards meeting its objectives. The PRiME Project can strengthen engineering education by providing faculty with an effective system for engaging students in learning about professional responsibility.

Educational Software for First Order Logic Semantics in Introductory Logic Courses

ERIC Educational Resources Information Center

Mauco, María Virginia; Ferrante, Enzo; Felice, Laura

2014-01-01

Basic courses on logic are common in most computer science curricula. Students often have difficulties in handling formalisms and getting familiar with them. Educational software helps to motivate and improve the teaching-learning processes. Therefore, incorporating these kinds of tools becomes important, because they contribute to gaining…

Connecting Biology and Organic Chemistry Introductory Laboratory Courses through a Collaborative Research Project

ERIC Educational Resources Information Center

Boltax, Ariana L.; Armanious, Stephanie; Kosinski-Collins, Melissa S.; Pontrello, Jason K.

2015-01-01

Modern research often requires collaboration of experts in fields, such as math, chemistry, biology, physics, and computer science to develop unique solutions to common problems. Traditional introductory undergraduate laboratory curricula in the sciences often do not emphasize connections possible between the various disciplines. We designed an…

Is Your Curriculum Up-to-Date.

ERIC Educational Resources Information Center

Pollack, Thomas A.

The dramatic changes that occurred in information technology in the 1990s have rendered the curricular offerings of many college and university information systems and computer science programs obselete. This paper identifies some of the most desirable skills in the current technology environment. By being astute innovators with college curricula,…

Professional Education in Educational Media and Technology: A 75 Year Perspective.

ERIC Educational Resources Information Center

Ely, Donald P.

1997-01-01

Describes the evolution of educational technology curricula and examines its current status. Highlights include graduate curriculum development; the National Defense Education Act; competition between school librarians and media specialists; the inclusion of computer technology; and three case studies of academic programs at Indiana University,…

Managing International Consulting Projects and International Business Courses Using Virtual Teams

ERIC Educational Resources Information Center

Prachyl, Cheryl; Quintanilla, Hector; Gutiérrez, Luis Antonio

2011-01-01

The Instituto Tecnologico y de Estudios Superiores de Monterrey and Texas Wesleyan University used technology based courses to enhance internationalization of their curricula. These courses required students to use computer technology as the distance communication medium and to complete an applied international consulting project as part of each…

ScrapbookUSA: Writing 'Cross Grade, 'Cross Curriculum, 'Cross Country.

ERIC Educational Resources Information Center

Roth, Emery, II

1993-01-01

Describes the ScrapBookUSA Writing Project, a computer telecommunications project linking classrooms across the country, and its educational opportunities for the writing and multicultural studies curricula. Examples of Hello letters, student essays, and ScrapBook Chronicles are given to demonstrate the impact a wide audience and immediate…

Effects of Virtual Reality Integrated Creative Thinking Instruction on Students' Creative Thinking Abilities

ERIC Educational Resources Information Center

Hu, Ridong; Wu, Yi-Yong; Shieh, Chich-Jen

2016-01-01

Since the popular applications of information technology, digitalized materials, media, and equipment have become the essential abilities and instruments for teachers in modern education. In addition to some curricula requiring computing & reasoning and operation & demonstration, the situations of teachers utilizing transparencies, films,…

Adults, Computers and Problem Solving: "What's the Problem?" OECD Skills Studies

ERIC Educational Resources Information Center

Chung, Ji Eun; Elliott, Stuart

2015-01-01

The "OECD Skills Studies" series aims to provide a strategic approach to skills policies. It presents OECD internationally comparable indicators and policy analysis covering issues such as: quality of education and curricula; transitions from school to work; vocational education and training (VET); employment and unemployment; innovative…

The Changing Business Environment: Implications for Vocational Curricula. State-of-the-Art Paper.

ERIC Educational Resources Information Center

Smith, E. Ray; Stallard, John J.

The widespread use of the micro/personal computer and related technological advancements are having important impacts on information management in the modern electronic office. Some of the most common software applications include word processing, spread sheet analysis, data management, graphics, and communications. Ancillary hardware/software…

Tough New Issues Refocus Health Education

ERIC Educational Resources Information Center

Dessoff, Alan

2011-01-01

From dating violence to sexting and social networking, districts are struggling to address a number of sensitive and relatively new health education issues that are aggravated by students' increasing access to computers, cell phones and other digital devices. Through new or revised curricula, administrators are attempting to deal with these and…

Mobile Technology Integrated Pedagogical Model

ERIC Educational Resources Information Center

Khan, Arshia

2014-01-01

Integrated curricula and experiential learning are the main ingredients to the recipe to improve student learning in higher education. In the academic computer science world it is mostly assumed that this experiential learning takes place at a business as an internship experience. The intent of this paper is to schism the traditional understanding…

New Technologies, New Curricula.

ERIC Educational Resources Information Center

Speidel, Gisela E.

1995-01-01

This article describes the AutoCAD Laboratory at Hawaii's Kamehameha Secondary Schools, offering the perspective of the AutoCAD instructor and Technology Department Head, looking at a day in the AutoCAD Laboratory, and explaining how teaching students about computer-assisted design and drafting can prepare them for college or careers. (SM)

Deepening Learning through Learning-by-Inventing

ERIC Educational Resources Information Center

Apiola, Mikko; Tedre, Matti

2013-01-01

It has been shown that deep approaches to learning, intrinsic motivation, and self-regulated learning have strong positive effects on learning. How those pedagogical theories can be integrated in computing curricula is, however, still lacking empirically grounded analyses. In a more general level, it has been widely acknowledged that in…

Computing and Accounting Office Occupations; Suggested Curricula Guide.

ERIC Educational Resources Information Center

Roman, John C.; And Others

These curriculum outlines are for administrator, supervisor, and teacher use in planning courses at local levels according to community needs and availability of facilities, equipment, and teaching time. The guide may also be used in developing and organizing courses for manpower development and training programs. The course outlines and other…

Teaching Multistep Equations with Virtual Manipulatives to Secondary Students with Learning Disabilities

ERIC Educational Resources Information Center

Satsangi, Rajiv; Hammer, Rachel; Evmenova, Anya S.

2018-01-01

Students with learning disabilities often struggle with the academic demands presented in secondary mathematics curricula. To combat these students' struggles, researchers have studied various pedagogical practices and classroom technologies for teaching standards covered in subjects such as algebra and geometry. However, as the role of computer-…

Kansas Business Education Curriculum Guide.

ERIC Educational Resources Information Center

Groneman, Nancy; Owen, Susan

This curriculum guide was developed to help business education teachers in Kansas improve and update their curricula to meet the needs of the present and future electronic office. The guide is based upon the premise that computer and keyboarding skills will be needed by all students and that communication skills and knowledge of word…

Explicating Mathematical Thinking in Differential Equations Using a Computer Algebra System

ERIC Educational Resources Information Center

Zeynivandnezhad, Fereshteh; Bates, Rachel

2018-01-01

The importance of developing students' mathematical thinking is frequently highlighted in literature regarding the teaching and learning of mathematics. Despite this importance, most curricula and instructional activities for undergraduate mathematics fail to bring the learner beyond the mathematics. The purpose of this study was to enhance…

Introductory Programming Subject in European Higher Education

ERIC Educational Resources Information Center

Aleksic, Veljko; Ivanovic, Mirjana

2016-01-01

Programming is one of the basic subjects in most informatics, computer science mathematics and technical faculties' curricula. Integrated overview of the models for teaching programming, problems in teaching and suggested solutions were presented in this paper. Research covered current state of 1019 programming subjects in 715 study programmes at…

Engineering education in the wake of hurricane Katrina

PubMed Central

Lima, Marybeth

2007-01-01

Living through hurricane Katrina and its aftermath and reflecting on these experiences from technical and non-technical standpoints has led me to reconsider my thoughts and philosophy on engineering education. I present three ideas regarding engineering education pedagogy that I believe will prepare future engineers for problem-solving in an increasingly complex world. They are (1) we must practice radical (to the root) engineering, (2) we must illustrate connections between engineering and public policy, and (3) we will join the charge to find sustainable solutions to problems. Ideas for bringing each of these concepts into engineering curricula through methods such as case study, practicing broad information gathering and data interpretation, and other methods inside and outside the classroom, are discussed. I believe that the consequences of not considering the root issues of problems to be solved, and of not including policy and sustainability considerations when problems to be solved are framed will lead our profession toward well meaning but insufficient utility. Hurricane Katrina convinced me that we must do better as educators to prepare our students for engineering for a sustainable world. PMID:18271988

The Impact of Design-Based STEM Integration Curricula on Student Achievement in Engineering, Science, and Mathematics

NASA Astrophysics Data System (ADS)

Selcen Guzey, S.; Harwell, Michael; Moreno, Mario; Peralta, Yadira; Moore, Tamara J.

2017-04-01

The new science education reform documents call for integration of engineering into K-12 science classes. Engineering design and practices are new to most science teachers, meaning that implementing effective engineering instruction is likely to be challenging. This quasi-experimental study explored the influence of teacher-developed, engineering design-based science curriculum units on learning and achievement among grade 4-8 students of different races, gender, special education status, and limited English proficiency (LEP) status. Treatment and control students ( n = 4450) completed pretest and posttest assessments in science, engineering, and mathematics as well as a state-mandated mathematics test. Single-level regression results for science outcomes favored the treatment for one science assessment (physical science, heat transfer), but multilevel analyses showed no significant treatment effect. We also found that engineering integration had different effects across race and gender and that teacher gender can reduce or exacerbate the gap in engineering achievement for student subgroups depending on the outcome. Other teacher factors such as the quality of engineering-focused science units and engineering instruction were predictive of student achievement in engineering. Implications for practice are discussed.

The Southern California Earthquake Center/Undergraduate Studies in Earthquake Information Technology (SCEC/UseIT) Internship Program

NASA Astrophysics Data System (ADS)

Perry, S.; Jordan, T.

2006-12-01

Our undergraduate research program, SCEC/UseIT, an NSF Research Experience for Undergraduates site, provides software for earthquake researchers and educators, movies for outreach, and ways to strengthen the technical career pipeline. SCEC/UseIT motivates diverse undergraduates towards science and engineering careers through team-based research in the exciting field of earthquake information technology. UseIT provides the cross-training in computer science/information technology (CS/IT) and geoscience needed to make fundamental progress in earthquake system science. Our high and increasing participation of women and minority students is crucial given the nation"s precipitous enrollment declines in CS/IT undergraduate degree programs, especially among women. UseIT also casts a "wider, farther" recruitment net that targets scholars interested in creative work but not traditionally attracted to summer science internships. Since 2002, SCEC/UseIT has challenged 79 students in three dozen majors from as many schools with difficult, real-world problems that require collaborative, interdisciplinary solutions. Interns design and engineer open-source software, creating increasingly sophisticated visualization tools (see "SCEC-VDO," session IN11), which are employed by SCEC researchers, in new curricula at the University of Southern California, and by outreach specialists who make animated movies for the public and the media. SCEC-VDO would be a valuable tool for research-oriented professional development programs.

WATERS - Integrating Science and Education Through the Development of an Education & Outreach Program that Engages Scientists, Students and Citizens

NASA Astrophysics Data System (ADS)

Eschenbach, E. A.; Conklin, M. H.

2007-12-01

The need to train students in hydrologic science and environmental engineering is well established. Likewise, the public requires a raised awareness of the seriousness of water quality and availability problems. The WATERS Network (WATer and Environmental Research Systems Network ) has the potential to significantly change the way students, researchers, citizens, policy makers and industry members learn about environmental problems and solutions regarding water quality, quantity and distribution. This potential can be met if the efforts of water scientists, computer scientists, and educators are integrated appropriately. Successful pilot projects have found that cyberinfrastructure for education and outreach needs to be developed in parallel with research related cyberinfrastructure. We propose further integration of research, education and outreach activities. Through the use of technology that connects students, faculty, researchers, policy makers and others, WATERS Network can provide learning opportunities and teaching efficiencies that can revolutionize environmental science and engineering education. However, there are a plethora of existing environmental science and engineering educational programs. In this environment, WATERS can make a greater impact through careful selection of activities that build upon its unique strengths, that have high potential for engaging the members, and that meet identified needs: (i) modernizing curricula and pedagogy (ii) integrating science and education, (iii) sustainable professional development, and (iv) training the next generation of interdisciplinary water and social scientists and environmental engineers. National and observatory-based education facilities would establish the physical infrastructure necessary to coordinate education and outreach activities. Each observatory would partner with local educators and citizens to develop activities congruent with the scientific mission of the observatory. An unprecedented opportunity exists for educational research of both formal and informal environmental science and engineering education in order to understand how the Network can be efficiently used to create effective technology-based learning environments for all participants.

Optranet: a European project

NASA Astrophysics Data System (ADS)

Jeanjean, Marie

2003-10-01

In a situation where curricula did not adjust at the required pace and many students are getting attracted out of science and technology, the shortage of skilled workers at the technician and engineer level is known to be a threat to development. In spite of a serious crisis in 2001, the trend of an increased presence of optical technologies remains unchanged and is bound to remain part of the landscape for decades. The level of investment required and the markets make Europe the best scale to plan for unified curricula and a global analysis of the human resources needs. There is no agreement on the definition of a trained optician, and European countries differ in the way they educate opticians, source of a lack of clarity and visibility which is detrimental to attracting good students and to the job market. Through its closely work with companies, OPTRANET will propose measures to enhance the adequacy and the visibility of the training offer.

Bioinformatics education in high school: implications for promoting science, technology, engineering, and mathematics careers.

PubMed

Kovarik, Dina N; Patterson, Davis G; Cohen, Carolyn; Sanders, Elizabeth A; Peterson, Karen A; Porter, Sandra G; Chowning, Jeanne Ting

2013-01-01

We investigated the effects of our Bio-ITEST teacher professional development model and bioinformatics curricula on cognitive traits (awareness, engagement, self-efficacy, and relevance) in high school teachers and students that are known to accompany a developing interest in science, technology, engineering, and mathematics (STEM) careers. The program included best practices in adult education and diverse resources to empower teachers to integrate STEM career information into their classrooms. The introductory unit, Using Bioinformatics: Genetic Testing, uses bioinformatics to teach basic concepts in genetics and molecular biology, and the advanced unit, Using Bioinformatics: Genetic Research, utilizes bioinformatics to study evolution and support student research with DNA barcoding. Pre-post surveys demonstrated significant growth (n = 24) among teachers in their preparation to teach the curricula and infuse career awareness into their classes, and these gains were sustained through the end of the academic year. Introductory unit students (n = 289) showed significant gains in awareness, relevance, and self-efficacy. While these students did not show significant gains in engagement, advanced unit students (n = 41) showed gains in all four cognitive areas. Lessons learned during Bio-ITEST are explored in the context of recommendations for other programs that wish to increase student interest in STEM careers.

Bioinformatics Education in High School: Implications for Promoting Science, Technology, Engineering, and Mathematics Careers

PubMed Central

Kovarik, Dina N.; Patterson, Davis G.; Cohen, Carolyn; Sanders, Elizabeth A.; Peterson, Karen A.; Porter, Sandra G.; Chowning, Jeanne Ting

2013-01-01

We investigated the effects of our Bio-ITEST teacher professional development model and bioinformatics curricula on cognitive traits (awareness, engagement, self-efficacy, and relevance) in high school teachers and students that are known to accompany a developing interest in science, technology, engineering, and mathematics (STEM) careers. The program included best practices in adult education and diverse resources to empower teachers to integrate STEM career information into their classrooms. The introductory unit, Using Bioinformatics: Genetic Testing, uses bioinformatics to teach basic concepts in genetics and molecular biology, and the advanced unit, Using Bioinformatics: Genetic Research, utilizes bioinformatics to study evolution and support student research with DNA barcoding. Pre–post surveys demonstrated significant growth (n = 24) among teachers in their preparation to teach the curricula and infuse career awareness into their classes, and these gains were sustained through the end of the academic year. Introductory unit students (n = 289) showed significant gains in awareness, relevance, and self-efficacy. While these students did not show significant gains in engagement, advanced unit students (n = 41) showed gains in all four cognitive areas. Lessons learned during Bio-ITEST are explored in the context of recommendations for other programs that wish to increase student interest in STEM careers. PMID:24006393

Towards a controlled vocabulary on software engineering education

NASA Astrophysics Data System (ADS)

Pizard, Sebastián; Vallespir, Diego

2017-11-01

Software engineering is the discipline that develops all the aspects of the production of software. Although there are guidelines about what topics to include in a software engineering curricula, it is usually unclear which are the best methods to teach them. In any science discipline the construction of a classification schema is a common approach to understand a thematic area. This study examines previous publications in software engineering education to obtain a first controlled vocabulary (a more formal definition of a classification schema) in the field. Publications from 1988 to 2014 were collected and processed using automatic clustering techniques and the outcomes were analysed manually. The result is an initial controlled vocabulary with a taxonomy form with 43 concepts that were identified as the most used in the research publications. We present the classification of the concepts in three facets: 'what to teach', 'how to teach' and 'where to teach' and the evolution of concepts over time.

Sustainability in CALL Learning Environments: A Systemic Functional Grammar Approach

ERIC Educational Resources Information Center

McDonald, Peter

2014-01-01

This research aims to define a sustainable resource in Computer-Assisted Language Learning (CALL). In order for a CALL resource to be sustainable it must work within existing educational curricula. This feature is a necessary prerequisite of sustainability because, despite the potential for educational change that digitalization has offered since…

A Resource Center for the Stimulation of Post Secondary Education Innovation via Computer Network.

ERIC Educational Resources Information Center

Savin, William

The goal of the project described here was to improve the quality of postsecondary education by offering institutions of higher learning information on currently funded educational projects through an interactive database, the Educational Resources Directory (ERD), which contains information on new methods, curricula, and educational technology.…

Selection of Server-Side Technologies for an E-Business Curriculum

ERIC Educational Resources Information Center

Sandvig, J. Christopher

2007-01-01

The rapid growth of e-business and e-commerce has made server-side programming an increasingly important topic in information systems (IS) and computer science (CS) curricula. This article presents an overview of the major features of several popular server-side programming technologies and discusses the factors that influence the selection of…

How Readability and Topic Incidence Relate to Performance on Mathematics Story Problems in Computer-Based Curricula

ERIC Educational Resources Information Center

Walkington, Candace; Clinton, Virginia; Ritter, Steven N.; Nathan, Mitchell J.

2015-01-01

Solving mathematics story problems requires text comprehension skills. However, previous studies have found few connections between traditional measures of text readability and performance on story problems. We hypothesized that recently developed measures of readability and topic incidence measured by text-mining tools may illuminate associations…

Perceptions and Experiences of Baccalaureate Nursing Program Leaders Related to Nursing Informatics

ERIC Educational Resources Information Center

Larson, Lisa R.

2017-01-01

Nursing program leadership for integrating nursing informatics (NI) into curricula is essential. NI is a specialty that combines nursing science, computer science, and information science to manage health information and improve patient health outcomes (American Nurses Association, 2008). Approximately 98,000 patient deaths per year occur due to…

Integrating Science and Mathematics Curricula Using Computer Mediated Communications: A Vygotskian Perspective.

ERIC Educational Resources Information Center

Charnitski, Christina Wotell; Harvey, Francis A.

This paper presents the theories of L.S. Vygotsky as a conceptual framework for implementing instruction that supports concept development and promotes higher level thinking skills in students. Three major components (i.e., language, scientific and spontaneous concepts, and the zone of proximal development) of Vygotsky's socio-cultural-historical…

Nature and Education: Learning from the World around Us.

ERIC Educational Resources Information Center

Donckers, Cathy

Our elementary secondary schools have hidden curricula which teach passivity, resistance to change, inflexibility, and submissive behavior in a world which is moving toward faster changes and heightened personal individuality. Class control with the teacher feeding information to the students like data to a computer can no longer be accepted as…

Engaging College Students on a Community Engagement with High School Students with Disabilities

ERIC Educational Resources Information Center

Lawler, James; Joseph, Anthony; Narula, Stuti

2014-01-01

Community engagement is a common course in college curricula of computer science and information systems. In this study, the authors analyze the benefits of digital storytelling, in a course engaging college students with high school students with disabilities. The authors discover that a project of storytelling progressively enables high…

The Effectiveness of Screencasts and Cognitive Tools as Scaffolding for Novice Object-Oriented Programmers

ERIC Educational Resources Information Center

Lee, Mark J. W.; Pradhan, Sunam; Dalgarno, Barney

2008-01-01

Modern information technology and computer science curricula employ a variety of graphical tools and development environments to facilitate student learning of introductory programming concepts and techniques. While the provision of interactive features and the use of visualization can enhance students' understanding and assist them in grasping…

Creating a Game Development Course with Limited Resources: An Evaluation Study

ERIC Educational Resources Information Center

Ritzhaupt, Albert D.

2009-01-01

This article provides an overview of the challenges in implementing a game development course with limited resources in computing curricula. An approach to a holistic game development course is outlined in terms of its organization, software, and instructional methods. The course had 23 students enrolled in its first offering and was…

From Intuition to Evidence: A Data-Driven Approach to Transforming CS Education

ERIC Educational Resources Information Center

Allevato, Anthony J.

2012-01-01

Educators in many disciplines are too often forced to rely on intuition about how students learn and the effectiveness of teaching to guide changes and improvements to their curricula. In computer science, systems that perform automated collection and assessment of programming assignments are seeing increased adoption, and these systems generate a…

Theory Meets Praxis: From Derrida to the Beginning German Classroom via the Internet

ERIC Educational Resources Information Center

Hasty, Will

2006-01-01

Based on practical experience in a new online beginning German course sequence, the author of this essay argues that contemporary cultural developments associated with the emergence of new technologies, particularly computer-assisted language learning, provide new opportunities to theorize German Studies curricula from the beginning level onward.…

Analysing Student Performance Using Sparse Data of Core Bachelor Courses

ERIC Educational Resources Information Center

Saarela, Mirka; Karkkainen, Tommi

2015-01-01

Curricula for Computer Science (CS) degrees are characterized by the strong occupational orientation of the discipline. In the BSc degree structure, with clearly separate CS core studies, the learning skills for these and other required courses may vary a lot, which is shown in students' overall performance. To analyze this situation, we apply…

Integrating Technology into the K-12 Music Curriculum.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia.

This guide is intended to provide resources for integrating technology into the K-12 music curriculum. The focus of the guide is on computer software and the use of MIDI (Musical Instrument Digital Interface) in the music classroom. The guide gives two examples of commercially available curricula that integrate technology as well as lesson plans…

Teaching business ethics to professional engineers.

PubMed

Sauser, William I

2004-04-01

Without question "business ethics" is one of the hot topics of the day. Over the past months we have seen business after business charged with improper practices that violate commonly-accepted ethical norms. This has led to a loss of confidence in corporate management, and has had severe economic consequences. From many quarters business educators have heard the call to put more emphasis on ethical practices in their business courses and curricula. Engineering educators are also heeding this call, since the practice of engineering usually involves working for (or leading) a business and/or engaging in business transactions. In the summer of 2002, Auburn University's Engineering Professional Development program made the decision to produce--based on the author's Executive MBA course in Business Ethics--a distance-delivered continuing education program for professional engineers and surveyors. Participants across the USA now may use the course to satisfy continuing education requirements with respect to professional licensing and certification. This paper outlines the purpose and content of the course and describes its production, distribution, application, and evaluation.

The biomedical engineer as a driver for Health Technology innovation.

PubMed

Colas Fustero, Javier; Guillen Arredondo, Alejandra

2010-01-01

Health Technology has played a mayor role on most of the fundamental advances in medicine, in the last 30 years. Right now, beginning the XXI Century, it is well accepted that the most important revolution expected in Health Care is the empowerment of the individuals on their own health management. Innovation in health care technologies will continue being paramount, not only in the advances of medicine and in the self health management of patients but also in allowing the sustainability of the public health care becomes more important, the role of the biomedical engineer will turn to be more crucial for the society. The paper targets the development of new curricula for the Biomedical Engineers, The needs of evolving on his different fields in which the contribution of the Biomedical Engineer is becoming fundamental to drive the innovation that Health Care Technology Industry must provide to continue improving human health through cross-disciplinary activities that integrate the engineering sciences with the biomedical sciences and clinical practice.

Improving motivation and engagement in core engineering courses with student teams

NASA Astrophysics Data System (ADS)

Trenshaw, Kathryn Faye

Team-based projects are common in capstone engineering design courses and increasingly common in first-year engineering programs. Despite high enrollments and budget cutbacks affecting many programs, second- and third-year students can also benefit from team-based project experiences, which motivate them to succeed in engineering and prepare them for a globally competitive workforce. My dissertation research demonstrates that team design projects can be incorporated into the curricula of engineering departments, and these projects result in positive affective outcomes for students. Using ABET outcomes and Self Determination Theory (SDT) as the background for my studies, I investigated students' confidence, motivation, and sense of community after experiencing team design projects in two different engineering departments at a large public institution. In the first study, I used a sequential mixed methods approach with a primary quantitative phase followed by an explanatory qualitative phase to evaluate a chemical engineering program that integrated team design projects throughout the curriculum. The evaluation methods included a survey based on desired ABET outcomes for students and focus groups to expand on the quantitative results. Students reported increased confidence in their design, teamwork, and communication skills after completing the projects. In my second and third studies, I used qualitative interviews based on SDT to explore student motivation in an electrical and computer engineering course redesigned to support students' intrinsic motivation to learn. SDT states that intrinsic motivation to learn is supported by increasing students' sense of autonomy, competence, and relatedness in regard to their learning. Using both narrative inquiry and phenomenological methodologies, I analyzed data from interviews of students for mentions of autonomy, competence, and relatedness as well as course events that were critical in changing students' motivation. Analysis revealed that individual choice, constructive failures, and a strong sense of community in the classroom were critical to moving students toward intrinsic motivation. Further, community building through team experiences characterized the essence of the student experience in the course. My research highlights a need for better quantitative measures of students' affective outcomes, specifically motivation, in the context of a single course. Based on the results of my studies, SDT should be reevaluated in terms of possible interdependencies between autonomy, competence, and relatedness, and how the social context of large engineering courses may create a deeper need for supporting relatedness.

Environmental engineering education at Ghent University, Flanders (Belgium).

PubMed

Demeestere, K; Dewulf, J; Janssen, C; Van Langenhove, H

2004-01-01

Since the 1980s, environmental engineering education has been a rapidly growing discipline in many universities. This paper discusses the history, the current status and the near future of environmental engineering education at Ghent University. This university, with about 50% of the Flemish university environmental engineering students, can be considered as representative for the situation in Flanders, Belgium. In contrast to many other universities, environmental engineering education at Ghent University does not have its historical roots in civil engineering, but has been developed from the curricula organized by the former Faculty of Agricultural Sciences. As part of a reorganisation of the education and research activities at this faculty, a curriculum leading to the degree of "bio-engineer in environmental technology" was established in 1991. This curriculum covers a 5-year study and is constructed around 8 main components. Exchange of students with other European universities, e.g. within the Socrates framework, has become a prominent aspect of student life and education. This paper also briefly describes the employment opportunities of graduated bio-engineers in environmental technology. Finally, the current implementation of the bachelor's-master's structure, leading to a "master of science in environmental technology" degree is summarized.

Typewriting 10-20-30. Senior High School Teacher Resource Manual.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

This manual is designed to assist typewriting teachers in the implementation of the Alberta, Canada, Typewriting 10-20-30 Curriculum (1985). Many ideas contained in the handbook can also be used in curricula that address keyboarding or the skill of typing in computer keyboarding, dictaphone typing, or word processing. The manual is organized in…

From Calculus to Dynamical Systems through DGS and CAS

ERIC Educational Resources Information Center

García, Jeanett López; Zamudio, Jorge Javier Jiménez

2015-01-01

Several factors have motivated the use of CAS or DGS in the teaching-learning process, such as: the development of new technologies, the availability of computers, and the widespread use of the Internet, among others. Even more, the trend to include CAS and DGS in the curricula of some undergraduate studies has resulted in the instruction of the…

Making the Best of It? Exploring the Realities of 3D Printing in School

ERIC Educational Resources Information Center

Nemorin, Selena; Selwyn, Neil

2017-01-01

Digital fabrication and "3D Making" are prominent recent additions to school curricula, hastened by the increased affordability of Computer Assisted Design software and devices such as 3D printers. It is increasingly argued that classroom use of these technologies can re-orientate schools towards forms of skills and knowledge appropriate…

Gaming, Student Literacies, and the Composition Classroom: Some Possibilities for Transformation

ERIC Educational Resources Information Center

Alexander, Jonathan

2009-01-01

This article explores the literacy narratives of two "gamers" to demonstrate the kinds of literacy skills that many students actively involved in computer and video gaming are developing during their play. This analysis becomes part of a larger claim about the necessity of re-visioning the place of gaming in composition curricula.…

Enhancing Problem-Solving Expertise by Means of an Authentic, Collaborative, Computer Supported and Problem-Based Course

ERIC Educational Resources Information Center

Arts, Jos A. R.; Gijselaers, Wim H.; Segers, Mien S. R.

2006-01-01

Instructional designs, embedding learning in meaningful contexts such as problem-based learning (PBL) are increasingly used for fostering expertise to prepare students for the demands of the future workplace. However, cognitive outcomes of these curricula in terms of expertise outcomes are not always conclusive. Based on the instructional…

Cultural Acceptability and Personal Willingness of Iranian Students toward Cadaveric Donation

ERIC Educational Resources Information Center

Abbasi Asl, Jamal; Nikzad, Hossein; Taherian, Aliakbar; Atlasi, Mohammad Ali; Naderian, Homayoun; Mousavi, Gholamabbas; Kashani, Milad Motalebi; Omidi, Abdollah

2017-01-01

Cadaver dissection stands as a crucial component in medical curricula around the world, although computer-based multimedia programs have been introduced in order to replace the need for cadaver donations. Due to a decrease in the number of unclaimed bodies and rather few donations, there is an insufficient number of cadavers for anatomical studies…

4 Steps to Getting Started with OER

ERIC Educational Resources Information Center

Fasimpaur, Karen

2012-01-01

Digital text, changes in textbook adoptions, 1-to-1 computing, Common Core standards, the rise in digital learning objects and online curricula, the push for personalized learning--all of these and other factors are part of an ongoing drama in education today that puts the future of curriculum materials very much in play. But thanks to open…

Exploring Do-It-Yourself Approaches in Computational Quantum Chemistry: The Pedagogical Benefits of the Classical Boys Algorithm

ERIC Educational Resources Information Center

Orsini, Gabriele

2015-01-01

The ever-increasing impact of molecular quantum calculations over chemical sciences implies a strong and urgent need for the elaboration of proper teaching strategies in university curricula. In such perspective, this paper proposes an extensive project for a student-driven, cooperative, from-scratch implementation of a general Hartree-Fock…

A Pilot Study of Short Computing Video Tutorials in a Graduate Public Health Biostatistics Course

ERIC Educational Resources Information Center

Hund, Lauren; Getrich, Christina

2015-01-01

Traditional lecture-centered classrooms are being challenged by active learning hybrid curricula. In small graduate programs with limited resources and primarily non-traditional students, exploring how to use online technology to optimize the role of the professor in the classroom is imperative. However, very little research exists in this area.…

Development of a Computer System To Educate Students To Evaluate and Interpret Published Drug Studies.

ERIC Educational Resources Information Center

Abate, Marie A.

The education of students in the techniques of critical appraisal of drug studies has been identified as a deficiency in many health sciences curricula. Errors in research design and inconsistencies in the reporting of study results persist in professional pharmacy and medical journals. Thus, thorough and accurate review and interpretation of…

Striving for Balance: The Co-Existence of Multi-, Inter- and Transdisciplinary Curricula in Information Management Education To Address Information Imbalances on Tertiary Level.

ERIC Educational Resources Information Center

Fairer-Wessels, Felicite A.

Within the South African tertiary education context, information management is taught from a variety of perspectives, including computer science, business management, informatics, and library and information science. Each discipline has a particular multidisciplinary focus dealing with its fundamentals. To investigate information management…

The Teaching of Anthropogenic Climate Change and Earth Science via Technology-Enabled Inquiry Education

ERIC Educational Resources Information Center

Bush, Drew; Sieber, Renee; Seiler, Gale; Chandler, Mark

2016-01-01

A gap has existed between the tools and processes of scientists working on anthropogenic global climate change (AGCC) and the technologies and curricula available to educators teaching the subject through student inquiry. Designing realistic scientific inquiry into AGCC poses a challenge because research on it relies on complex computer models,…

Makerspaces across Settings: Didactic Design for Programming in Formal and Informal Teacher Education in the Nordic Countries

ERIC Educational Resources Information Center

Kjällander, Susanne; Åkerfeldt, Anna; Mannila, Linda; Parnes, Peter

2018-01-01

For education to provide knowledge reflecting our current and future society, many countries are revising their curricula, including a vivid discussion on digital competence, programming and computational thinking. This article builds an understanding of the maker movement in relation to education in programming, by demonstrating challenges and…

Identification of Students' Content Mastery and Cognitive and Affective Percepts of a Bioinformatics Miniunit: A Case Study with Recommendations for Teacher Education

ERIC Educational Resources Information Center

Wefer, Stephen H.; Anderson, O. Roger

2008-01-01

Bioinformatics, merging biological data with computer science, is increasingly incorporated into school curricula at all levels. This case study of 10 secondary school students highlights student individual differences (especially the way they processed information and integrated procedural and analytical thought) and summarizes a variety of…

Enhancing environmental engineering education in Europe

NASA Astrophysics Data System (ADS)

Caporali, Enrica; Tuneski, Atanasko

2013-04-01

In the frame of knowledge triangle: education-innovation-research, the environmental engineering higher education is here discussed with reference to the TEMPUS-Trans European Mobility Programme for University Studies promoted by the European Commission. Among the focused aspects of TEMPUS are curricula harmonization and lifelong learning programme development in higher education. Two are the curricula, since the first TEMPUS project, coordinated in the period 2005-2008 by University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje. The second three years TEMPUS Joint Project denominated DEREL-Development of Environment and Resources Engineering Learning, is active since October 2010. To the consortium activities participate 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. The same 4 EU Universities and the same Macedonian Institutions participated at the first TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum. Both the first and second cycle curriculum, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in Skopje, FYR of Macedonia, University of Novi Sad, Serbia and Polytechnic University of Tirana, Albania, following the criteria and conditions for setting up a Joint Postgraduate Degree. The new second cycle degree curriculum has been just activated in the current academic year 2012/2013. In DEREL a second objective is to implement a sustainable regional network aimed to offer lifelong learning seminars for environment and resources engineering education and training of interested stakeholders and organize workshops focused on strengthening the links in the knowledge triangle: environment education-innovation-research, with participation of postgraduate students, public services, enterprises and NGO's.

Low latency, high bandwidth data communications between compute nodes in a parallel computer

DOEpatents

Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2010-11-02

Methods, parallel computers, and computer program products are disclosed for low latency, high bandwidth data communications between compute nodes in a parallel computer. Embodiments include receiving, by an origin direct memory access (`DMA`) engine of an origin compute node, data for transfer to a target compute node; sending, by the origin DMA engine of the origin compute node to a target DMA engine on the target compute node, a request to send (`RTS`) message; transferring, by the origin DMA engine, a predetermined portion of the data to the target compute node using memory FIFO operation; determining, by the origin DMA engine whether an acknowledgement of the RTS message has been received from the target DMA engine; if the an acknowledgement of the RTS message has not been received, transferring, by the origin DMA engine, another predetermined portion of the data to the target compute node using a memory FIFO operation; and if the acknowledgement of the RTS message has been received by the origin DMA engine, transferring, by the origin DMA engine, any remaining portion of the data to the target compute node using a direct put operation.

Conquering technophobia: preparing faculty for today.

PubMed

Richard, P L

1997-01-01

The constantly changing world of technology creates excitement and an obligation for faculty of schools of nursing to address computer literacy in the curricula at all levels. The initial step in the process of meeting the goals was to assist the faculty in becoming computer literate so that they could foster and encourage the same in the students. The implementation of The Cure for Technophobia included basic and advanced computer skills designed to assist the faculty in becoming comfortable and competent computer users. The applications addressed included: introduction to windows, electronic mail, word processing, presentation and database applications, library on-line searches of literature databases, introduction to internet browsers and a computerized testing program. Efforts were made to overcome barriers to computer literacy and promote the learning process. Familiar, competent, computer literate individuals were used to conduct the classes to accomplish this goal.

Critical thinking traits of top-tier experts and implications for computer science education

NASA Astrophysics Data System (ADS)

Bushey, Dean E.

A documented shortage of technical leadership and top-tier performers in computer science jeopardizes the technological edge, security, and economic well-being of the nation. The 2005 President's Information and Technology Advisory Committee (PITAC) Report on competitiveness in computational sciences highlights the major impact of science, technology, and innovation in keeping America competitive in the global marketplace. It stresses the fact that the supply of science, technology, and engineering experts is at the core of America's technological edge, national competitiveness and security. However, recent data shows that both undergraduate and postgraduate production of computer scientists is falling. The decline is "a quiet crisis building in the United States," a crisis that, if allowed to continue unchecked, could endanger America's well-being and preeminence among the world's nations. Past research on expert performance has shown that the cognitive traits of critical thinking, creativity, and problem solving possessed by top-tier performers can be identified, observed and measured. The studies show that the identified attributes are applicable across many domains and disciplines. Companies have begun to realize that cognitive skills are important for high-level performance and are reevaluating the traditional academic standards they have used to predict success for their top-tier performers in computer science. Previous research in the computer science field has focused either on programming skills of its experts or has attempted to predict the academic success of students at the undergraduate level. This study, on the other hand, examines the critical-thinking skills found among experts in the computer science field in order to explore the questions, "What cognitive skills do outstanding performers possess that make them successful?" and "How do currently used measures of academic performance correlate to critical-thinking skills among students?" The results of this study suggest a need to examine how critical-thinking abilities are learned in the undergraduate computer science curriculum and the need to foster these abilities in order to produce the high-level, critical-thinking professionals necessary to fill the growing need for these experts. Due to the fact that current measures of academic performance do not adequately depict students' cognitive abilities, assessment of these skills must be incorporated into existing curricula.

Human capital needs - teaching, training and coordination for nuclear fuel cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Retegan, T.; Ekberg, C.; John, J.

Human capital is the accumulation of competencies, knowledge, social and creativity skills and personality attributes, which are necessary to perform work so as to produce economic value. In the frame of the nuclear fuel cycle, this is of paramount importance that the right human capital exists and in Europe this is fostered by a series of integrated or directed projects. The teaching, training and coordination will be discussed in the frame of University curricula with examples from several programs, like e.g. the Master of Nuclear Engineering at Chalmers University, Sweden and two FP7 EURATOM Projects: CINCH - a project formore » cooperation in nuclear chemistry - and ASGARD - a research project on advanced or novel nuclear fuels and their reprocessing issues for generation IV reactors. The integration of the university curricula in the market needs but also the anchoring in the research and future fuel cycles will be also discussed, with examples from the ASGARD project. (authors)« less

A Smart Home Test Bed for Undergraduate Education to Bridge the Curriculum Gap from Traditional Power Systems to Modernized Smart Grids

ERIC Educational Resources Information Center

Hu, Qinran; Li, Fangxing; Chen, Chien-fei

2015-01-01

There is a worldwide trend to modernize old power grid infrastructures to form future smart grids, which will achieve efficient, flexible energy consumption by using the latest technologies in communication, computing, and control. Smart grid initiatives are moving power systems curricula toward smart grids. Although the components of smart grids…

Tool Use and the Development of the Function Concept: From Repeated Calculations to Functional Thinking

ERIC Educational Resources Information Center

Doorman, Michiel; Drijvers, Paul; Gravemeijer, Koeno; Boon, Peter; Reed, Helen

2012-01-01

The concept of function is a central but difficult topic in secondary school mathematics curricula, which encompasses a transition from an operational to a structural view. The question in this paper is how the use of computer tools may foster this transition. With domain-specific pedagogical knowledge on the learning of function as a point of…

Shifting the Load: A Peer Dialogue Agent That Encourages Its Human Collaborator to Contribute More to Problem Solving

ERIC Educational Resources Information Center

Howard, Cynthia; Jordan, Pamela; Di Eugenio, Barbara; Katz, Sandra

2017-01-01

Despite a growing need for educational tools that support students at the earliest phases of undergraduate Computer Science (CS) curricula, relatively few such tools exist--the majority being Intelligent Tutoring Systems. Since peer interactions more readily give rise to challenges and negotiations, another way in which students can become more…

An Analysis of Young Students' Thinking When Completing Basic Coding Tasks Using Scratch Jnr. on the iPad

ERIC Educational Resources Information Center

Falloon, G.

2016-01-01

Recent government moves in many countries have seen coding included in school curricula, or promoted as part of computing, mathematics or science programmes. While these moves have generally been associated with a need to engage more young people in technology study, research has hinted at possible benefits from learning to program including…

Pedagogical Praxis: The Professions as Models for Learning in the Age of the Smart Machine. WCER Working Paper No. 2003-6

ERIC Educational Resources Information Center

Shaffer, David W.

2003-01-01

Successful curricula are not collections of isolated elements; rather, effective learning environments function as coherent systems (Brown & Campione, 1996; see also Papert, 1980; Shaffer, 1998). The theory of pedagogical praxis begins with the premise that computers and other information technologies make it easier for students to become active…

Are Patterns Important? An Investigation of the Relationships between Proficiencies in Patterns, Computation, Executive Functioning, and Algebraic Word Problems

ERIC Educational Resources Information Center

Lee, Kerry; Ng, Swee Fong; Bull, Rebecca; Pe, Madeline Lee; Ho, Ringo Ho Moon

2011-01-01

Although mathematical pattern tasks are often found in elementary school curricula and are deemed a building block for algebra, a recent report (National Mathematics Advisory Panel, 2008) suggests the resources devoted to its teaching and assessment need to be rebalanced. We examined whether children's developing proficiency in solving algebraic…

Systems in the Foundations of Information Systems Course to Retain Students and to Support the IS 2010 Model Curricula

ERIC Educational Resources Information Center

Slauson, Gayla Jo; Carpenter, Donald; Snyder, Johnny

2011-01-01

Systems in the Foundations of Information Systems course can be used to connect with students in computer information systems programs; a systematic approach to beginning student relationship management in this course is helpful. The authors suggest that four systems be created in the Foundations Course. These theoretical systems include an…

Proceedings of the Scientific Meeting of the International Association for Statistical Education (1st, Perugia, Italy, August, 1993).

ERIC Educational Resources Information Center

Brunelli, Lina, Ed.; Cicchitelli, Giuseppe, Ed.

This volume contains papers on computing and television as well as on the rapidly growing area of electronic communication among teachers and between teachers and students. Data analysis is now an important strand in school curricula in many nations. Many of the contributors discuss statistics in the schools from various perspectives. University…

Wisconsin Title I Migrant Education. Section 143 Project: Development of an Item Bank. Summary Report.

ERIC Educational Resources Information Center

Brown, Frank N.; And Others

The successful Wisconsin Title 1 project item bank offers a valid, flexible, and efficient means of providing migrant student tests in reading and mathematics tailored to instructor curricula. The item bank system consists of nine PASCAL computer programs which maintain, search, and select from approximately 1,000 test items stored on floppy disks…

Development of instruction in hospital electrical safety for medical education.

PubMed

Yoo, J H; Broderick, W A

1978-01-01

Although hospital electrical safety is receiving increased attention in the literature of engineers, it is not, at present, reflected in the curricula of medical schools. A possible reason for this omission is that biomedical and/or clinical engineers knowledgeable in electrical safety are not usually trained to teach. One remedy for this problem is to combine the knowledge of engineers with that of instructional developers to design a systematic curriculum for a course in hospital electrical safety. This paper describes such an effort at the University of Texas Health Science Center at San Antonio (UTHSCSA). A biomedical engineer and an instructional developer designed an instructional module in hospital electrical safety; the engineer taught the module, and both evaluated the results. The process and outcome of their collaboration are described. This model was effectively applied in the classroom as a four-hour segment in hospital electrical safety for first-year medical students at UTHSCSA. It is hoped that an additional benefit of this system will be that it offers an opportunity for continuing improvement in this kind of instruction at other medical schools and hospitals.

Preparing Students for Middle School Through After-School STEM Activities

NASA Astrophysics Data System (ADS)

Moreno, Nancy P.; Tharp, Barbara Z.; Vogt, Gregory; Newell, Alana D.; Burnett, Christopher A.

2016-12-01

The middle school years are a crucial time for cultivating students' interest in and preparedness for future STEM careers. However, not all middle school children are provided opportunities to engage, learn and achieve in STEM subject areas. Engineering, in particular, is neglected in these grades because it usually is not part of science or mathematics curricula. This study investigates the effectiveness of an engineering-integrated STEM curriculum designed for use in an after-school environment. The inquiry-based activities comprising the unit, Think Like an Astronaut, were intended to introduce students to STEM careers—specifically engineering and aerospace engineering—and enhance their skills and knowledge applicable related to typical middle school science objectives. Results of a field test with a diverse population of 5th grade students in nine schools revealed that Think Like an Astronaut lessons are appropriate for an after-school environment, and may potentially help increase students' STEM-related content knowledge and skills.

Design and development of a cross-cultural disposition inventory

NASA Astrophysics Data System (ADS)

Davies, Randall; Zaugg, Holt; Tateishi, Isaku

2015-01-01

Advances in technology have increased the likelihood that engineers will have to work in a global, culturally diverse setting. Many schools of engineering are currently revising their curricula to help students to develop cultural competence. However, our ability to measure cultural dispositions can be a challenge. The purpose of this project was to develop and test an instrument that measures the various aspects of cultural disposition. The results of the validation process verified that the hypothesised model adequately represented the data. The refined instrument produced a four-factor model for the overall construct. The validation process for the instrument verified the existence of specific subcomponents that form the overall cultural disposition construct. There also seems to be a hierarchical relationship within the subcomponents of cultural disposition. Additional research is needed to explore which aspects of cultural disposition affect an individual's ability to work effectively in a culturally diverse engineering team.

Problem-based learning in optical engineering studies

NASA Astrophysics Data System (ADS)

Voznesenskaya, Anna

2016-09-01

Nowadays, the Problem-Based Learning (PBL) is one of the most prospective educational technologies. PBL is based on evaluation of learning outcomes of a student, both professional and personal, instead of traditional evaluation of theoretical knowledge and selective practical skills. Such an approach requires changes in the curricula development. There should be introduced projects (cases) imitating real tasks from the professional life. These cases should include a problem summary with necessary theoretic description, charts, graphs, information sources etc, task to implement and evaluation indicators and criteria. Often these cases are evaluated with the assessment-center method. To motivate students for the given task they could be divided into groups and have a contest. Whilst it looks easy to implement in social, economic or teaching fields PBL is pretty complicated in engineering studies. Examples of cases in the first-cycle optical engineering studies are shown in this paper. Procedures of the PBL implementation and evaluation are described.

Education and training for technicians in photonics-enabled technologies

NASA Astrophysics Data System (ADS)

Hull, Daniel M.; Hull, Darrell M.

2005-10-01

Within a few years after lasers were first made operational in 1960, it became apparent that rapid growth in the applications of this new technology in industry, health care, and other fields would require a new generation of technicians in laser/optics engineering. Technicians are the men and women who work alongside scientists and engineers in bringing their ideas, designs, and processes to fruition. In America, most highly qualified technicians are graduates of associate of applied science (AAS) programs in community and technical colleges (two-year postsecondary institutions). Curricula and educational programs designed to prepare technicians in laser/electro-optics technology (LEOT) emerged in the 1970s; today there are over 15 LEOT programs in the United States producing over 100 LEOT graduates each year.

An Investigation into Current Construction Engineering and Management Programs and Curricula and Their Applicability to the U.S. Armed Forces

DTIC Science & Technology

1988-06-01

34Fioneer :. ConsruLtiCn EnIineeri Edcatio .’ JUrnalE 1WLC trutior, Enqineeri") anJ lar,-emert. AEt. c. 111. N1 :. 1. Mar.. 1985. 1-z.evis. A.C.. Fros and...34 Scciet y_fr Fronctg EnA Lneerinq Edution Civil EnoineerinQ Division Fk -1-1e t!in . ’J I . 7, ND. 1 . DEec .. I19i4 1 pp .6. Rainer, R.P., "Civil

Biomedical engineering education--status and perspectives.

PubMed

Magjarevic, Ratko; Zequera Diaz, Martha L

2014-01-01

Biomedical Engineering programs are present at a large number of universities all over the world with an increasing trend. New generations of biomedical engineers have to face the challenges of health care systems round the world which need a large number of professionals not only to support the present technology in the health care system but to develop new devices and services. Health care stakeholders would like to have innovative solutions directed towards solving problems of the world growing incidence of chronic disease and ageing population. These new solutions have to meet the requirements for continuous monitoring, support or care outside clinical settlements. Presence of these needs can be tracked through data from the Labor Organization in the U.S. showing that biomedical engineering jobs have the largest growth at the engineering labor market with expected 72% growth rate in the period from 2008-2018. In European Union the number of patents (i.e. innovation) is the highest in the category of biomedical technology. Biomedical engineering curricula have to adopt to the new needs and for expectations of the future. In this paper we want to give an overview of engineering professions in related to engineering in medicine and biology and the current status of BME education in some regions, as a base for further discussions.

Wind Energy Workforce Development: Engineering, Science, & Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

2013-03-29

Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Mastersmore » degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.« less

Diving Deep: A Comparative Study of Educator Undergraduate and Graduate Backgrounds and Their Effect on Student Understanding of Engineering and Engineering Careers, Utilizing an Underwater Robotics Program

NASA Astrophysics Data System (ADS)

Scribner, J. Adam

Numerous studies have demonstrated that educators having degrees in their subjects significantly enhances student achievement, particularly in secondary mathematics and science (Chaney, 1995; Goe, 2007; Rowan, Chiang, & Miller, 1997; Wenglinsky, 2000). Yet, science teachers in states that adopt the Next Generation Science Standards will be facilitating classroom engineering activities despite the fact that few have backgrounds in engineering. This quantitative study analyzed ex-post facto WaterBotics (an innovative underwater robotics curriculum for middle and high school students) data to determine if educators having backgrounds in engineering (i.e., undergraduate and graduate degrees in engineering) positively affected student learning on two engineering outcomes: 1) the engineering design process, and 2) understanding of careers in engineering (who engineers are and what engineers do). The results indicated that educators having backgrounds in engineering did not significantly affect student understanding of the engineering design process or careers in engineering when compared to educators having backgrounds in science, mathematics, technology education, or other disciplines. There were, however, statistically significant differences between the groups of educators. Students of educators with backgrounds in technology education had the highest mean score on assessments pertaining to the engineering design process while students of educators with disciplines outside of STEM had the highest mean scores on instruments that assess for student understanding of careers in engineering. This might be due to the fact that educators who lack degrees in engineering but who teach engineering do a better job of "sticking to the script" of engineering curricula.

Searching for scientific literacy and critical pedagogy in socioscientific curricula: A critical discourse analysis

NASA Astrophysics Data System (ADS)

Cummings, Kristina M.

The omnipresence of science and technology in our society require the development of a critical and scientifically literate citizenry. However, the inclusion of socioscientific issues, which are open-ended controversial issues informed by both science and societal factors such as politics, economics, and ethics, do not guarantee the development of these skills. The purpose of this critical discourse analysis is to identify and analyze the discursive strategies used in intermediate science texts and curricula that address socioscientific topics and the extent to which the discourses are designed to promote or suppress the development of scientific literacy and a critical pedagogy. Three curricula that address the issue of energy and climate change were analyzed using Gee's (2011) building tasks and inquiry tools. The curricula were written by an education organization entitled PreSEES, a corporate-sponsored group called NEED, and a non-profit organization named Oxfam. The analysis found that the PreSEES and Oxfam curricula elevated the significance of climate change and the NEED curriculum deemphasized the issue. The PreSEES and Oxfam curricula promoted the development of scientific literacy while the NEED curricula suppressed its development. The PreSEES and Oxfam curricula both promoted the development of the critical pedagogy; however, only the Oxfam curricula provided authentic opportunities to enact sociopolitical change. The NEED curricula suppressed the development of critical pedagogy. From these findings, the following conclusions were drawn. When socioscientific issues are presented with the development of scientific literacy and critical pedagogy, the curricula allow students to develop fact-based opinions about the issue. However, curricula that address socioscientific issues without the inclusion of these skills minimize the significance of the issue and normalize the hegemonic worldview promoted by the curricula's authors. Based on these findings, additional research is necessary to confirm the connection between the way curricula address a socioscientific issue and develop or suppress scientific literacy. Additionally, further analysis is necessary to confirm the connection between corporate-sponsored curricula and the suppression of socioscientific issues, scientific literacy, and critical pedagogy. Finally, this study addressed only the intended results of the curricula. Further research is necessary to measure the actual impacts of these curricula on students.

Computer Engineers.

ERIC Educational Resources Information Center

Moncarz, Roger

2000-01-01

Looks at computer engineers and describes their job, employment outlook, earnings, and training and qualifications. Provides a list of resources related to computer engineering careers and the computer industry. (JOW)

Remote direct memory access

DOEpatents

Archer, Charles J.; Blocksome, Michael A.

2012-12-11

Methods, parallel computers, and computer program products are disclosed for remote direct memory access. Embodiments include transmitting, from an origin DMA engine on an origin compute node to a plurality target DMA engines on target compute nodes, a request to send message, the request to send message specifying a data to be transferred from the origin DMA engine to data storage on each target compute node; receiving, by each target DMA engine on each target compute node, the request to send message; preparing, by each target DMA engine, to store data according to the data storage reference and the data length, including assigning a base storage address for the data storage reference; sending, by one or more of the target DMA engines, an acknowledgment message acknowledging that all the target DMA engines are prepared to receive a data transmission from the origin DMA engine; receiving, by the origin DMA engine, the acknowledgement message from the one or more of the target DMA engines; and transferring, by the origin DMA engine, data to data storage on each of the target compute nodes according to the data storage reference using a single direct put operation.

Using an Adaptive Expertise Lens to Understand the Quality of Teachers' Classroom Implementation of Computer-Supported Complex Systems Curricula in High School Science

ERIC Educational Resources Information Center

Yoon, Susan A.; Koehler-Yom, Jessica; Anderson, Emma; Lin, Joyce; Klopfer, Eric

2015-01-01

Background: This exploratory study is part of a larger-scale research project aimed at building theoretical and practical knowledge of complex systems in students and teachers with the goal of improving high school biology learning through professional development and a classroom intervention. Purpose: We propose a model of adaptive expertise to…

Introduction to Computers & Introduction to Word Processing: Integrating Content Area Coursework into College Reading/Study Skills Curricula Using Microcomputers.

ERIC Educational Resources Information Center

Balajthy, Ernest; And Others

A study examined the planning, implementation, and evaluation of a curriculum designed to teach 60 college level developmental reading students to use microcomputers (Apple) as learning tools and to improve their content area reading ability. The textbook from a biology course in which all but three of the subjects were enrolled was the source for…

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

A simplified gross thrust computing technique for an afterburning turbofan engine

NASA Technical Reports Server (NTRS)

Hamer, M. J.; Kurtenbach, F. J.

1978-01-01

A simplified gross thrust computing technique extended to the F100-PW-100 afterburning turbofan engine is described. The technique uses measured total and static pressures in the engine tailpipe and ambient static pressure to compute gross thrust. Empirically evaluated calibration factors account for three-dimensional effects, the effects of friction and mass transfer, and the effects of simplifying assumptions for solving the equations. Instrumentation requirements and the sensitivity of computed thrust to transducer errors are presented. NASA altitude facility tests on F100 engines (computed thrust versus measured thrust) are presented, and calibration factors obtained on one engine are shown to be applicable to the second engine by comparing the computed gross thrust. It is concluded that this thrust method is potentially suitable for flight test application and engine maintenance on production engines with a minimum amount of instrumentation.

Method and apparatus of parallel computing with simultaneously operating stream prefetching and list prefetching engines

DOEpatents

Boyle, Peter A.; Christ, Norman H.; Gara, Alan; Mawhinney, Robert D.; Ohmacht, Martin; Sugavanam, Krishnan

2012-12-11

A prefetch system improves a performance of a parallel computing system. The parallel computing system includes a plurality of computing nodes. A computing node includes at least one processor and at least one memory device. The prefetch system includes at least one stream prefetch engine and at least one list prefetch engine. The prefetch system operates those engines simultaneously. After the at least one processor issues a command, the prefetch system passes the command to a stream prefetch engine and a list prefetch engine. The prefetch system operates the stream prefetch engine and the list prefetch engine to prefetch data to be needed in subsequent clock cycles in the processor in response to the passed command.

10 Great Curricula: Lived Conversations of Progressive, Democratic Curricula in School and Society

ERIC Educational Resources Information Center

Poetter, Thomas S.

2012-01-01

10 Great Curricula is a collection of stories written by educators who have come to understand curricula differently as a result of their engagement with a graduate course and its instructor. The book represents the best of what can be found in teaching and learning, in general, and in the quest for meaningful ways to understand curricula in…

Undergraduate environmental engineering education in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, C.; Bero, B.N.

1999-07-01

In this paper, the development process, present situations, causes of improvement, and trends of higher education of environmental engineering in China are discussed. Several education modes in environmental engineering in China are also presented. The development process can be divided into three stages: the beginning stage, the expansion stage, and the modification stage. The 1970's and early 1980's wake of environmental consciousness and serious pollution situation in China resulted in about 20 universities setting up an environmental engineering specialty. The late 1980's and middle 1990's job opportunities for undergraduates in China resulted in many universities' creation of the environmental engineeringmore » specialty from specialties such as geography, geology, hydrology, mining engineering, and mineral separation engineering where job opportunities were stagnant. At present, adjustment and improvement of environmental engineering education are urgently required because of the excessive increase of undergraduate number, change of job opportunities and implementation of five-work-day system in China. Other problems include how to determine the ratio of social science courses to engineering science courses, how to determine the relationship of fundamental and applied courses, and how to determine the specialized direction. Hunan University, as a typical university conferring an accredited Bachelor degree in Environmental Engineering in four academic years in China, has been improving the instruction schedule for undergraduate education in environmental engineering. The curricula of the three phases for undergraduates of environmental engineering specialty at Hunan University are presented as a case study.« less

Teaching pathology in the 21st century. An experimental automated curriculum delivery system for basic pathology.

PubMed

Woods, J W; Jones, R R; Schoultz, T W; Kuenz, M; Moore, R L

1988-08-01

In late 1984, the "General Professional Education of the Physician" (GPEP) report recommended, among other things, that medical curricula be revised to rely less on lectures and more on independent study and problem solving. We seem to have anticipated, in 1980, the findings of the GPEP panel by formulating and starting to test the hypothesis that certain "core" information in medical curricula can be as effectively delivered by technology-based self-study means as by lecture or formal laboratory. We began, at that time, to prepare a series of self-study materials using, at first, videotape and then computer-controlled optical videodiscs. The content area selected for study was basic microscopic pathology. The series was planned to cover the following areas of study: cellular alterations and adaptations, cell injury, acute inflammation, chronic inflammation and wound healing, cellular accumulations, circulatory disturbances, necrosis, and neoplasia. All are intended to provide learning experiences in basic pathology. The first two programs were released for testing in 1983 as a two-sided videodisc accompanied by computer-driven pretests, study modules, and posttests that used Apple computers and Pioneer (DiscoVision) videodisc players. An MS DOS (eg, IBM) version of the computer programs was released in 1984. The first two programs are now used in 57 US, Canadian, European, and Philippine health professions schools, and over 1300 student and faculty evaluations have been received. Student and faculty evaluations of these first two programs were very positive, and, as a result, the others are in production and will be completed in 1988. Only when a critical mass of curriculum is available can we really test our stated hypothesis. In the meantime, it is worthwhile to report the evaluation of the first two programs.

On the Convenience of Using a Computer Simulation to Teach Enzyme Kinetics to Undergraduate Students with Biological Chemistry-Related Curricula

ERIC Educational Resources Information Center

Gonzalez-Cruz, Javier; Rodriguez-Sotres, Rogelio; Rodriguez-Penagos, Mireya

2003-01-01

Enzyme kinetics is a difficult subject for students to learn and for tutors to teach. During the practicals included in the biochemical courses at the Faculty of Chemistry of Universidad Nacional Autonoma de Mexico, we found that the students acquire good training in the calculations to obtain kinetic parameters such as K[subscript m], V[subscript…

A Research Report of Small High Schools in the United States in Regards to Curricular Offerings, Micro-Computer Usage, and Correspondence Courses.

ERIC Educational Resources Information Center

Barker, Bruce O.; Petersen, Paul D.

Using a questionnaire, researchers surveyed 319 public high schools, each with fewer than 500 students, in 46 states to determine the extent and use of microcomputers in small high schools, to assess the use and users of correspondence courses in small schools, to identify the most frequently offered courses in small high school curricula, and to…

A Transcript Analysis of Graduates of Three Community College of Philadelphia Curricula between the Years 1985 and 1992. Institutional Research Report #83.

ERIC Educational Resources Information Center

Terzian, Aram L.; Obetz, Wayne S.

A study was conducted at the Community College of Philadelphia (CCP) to examine the course-taking patterns of 94 graduates of the associate in arts (AA) curriculum, 1,957 graduates of the association in general studies (AGS) curriculum, and 99 graduates of the associate in science (AS) curriculum. Using a computer-based approach to transcript…

Computer Programming Languages and Expertise Needed by Practicing Engineers.

ERIC Educational Resources Information Center

Doelling, Irvin

1980-01-01

Discussed is the present engineering computer environment of a large aerospace company recognized as a leader in the application and development of computer-aided design and computer-aided manufacturing techniques. A review is given of the exposure spectrum of engineers to the world of computing, the computer languages used, and the career impacts…

Computing in Hydraulic Engineering Education

NASA Astrophysics Data System (ADS)

Duan, J. G.

2011-12-01

Civil engineers, pioneers of our civilization, are rarely perceived as leaders and innovators in modern society because of retardations in technology innovation. This crisis has resulted in the decline of the prestige of civil engineering profession, reduction of federal funding on deteriorating infrastructures, and problems with attracting the most talented high-school students. Infusion of cutting-edge computer technology and stimulating creativity and innovation therefore are the critical challenge to civil engineering education. To better prepare our graduates to innovate, this paper discussed the adaption of problem-based collaborative learning technique and integration of civil engineering computing into a traditional civil engineering curriculum. Three interconnected courses: Open Channel Flow, Computational Hydraulics, and Sedimentation Engineering, were developed with emphasis on computational simulations. In Open Channel flow, the focuses are principles of free surface flow and the application of computational models. This prepares students to the 2nd course, Computational Hydraulics, that introduce the fundamental principles of computational hydraulics, including finite difference and finite element methods. This course complements the Open Channel Flow class to provide students with in-depth understandings of computational methods. The 3rd course, Sedimentation Engineering, covers the fundamentals of sediment transport and river engineering, so students can apply the knowledge and programming skills gained from previous courses to develop computational models for simulating sediment transport. These courses effectively equipped students with important skills and knowledge to complete thesis and dissertation research.

Influence of national culture on the adoption of integrated medical curricula.

PubMed

Jippes, Mariëlle; Majoor, Gerard D

2011-03-01

Integrated curricula have been implemented in medical schools all over the world. However, among countries different relative numbers of schools with integrated curricula are found. This study aims to explore the possible correlation between the percentage of medical schools with integrated curricula in a country and that country's cultural characteristics. Curricula were defined as not integrated if in the first 2 years of the program at least two out of the three monodisciplinary courses Anatomy, Physiology and Biochemistry were identified. Culture was defined using Hofstede's dimensions Power distance, Uncertainty avoidance, Masculinity/Femininity, and Individualism/Collectivism. Consequently, this study had to be restricted to the 63 countries included in Hofstede's studies which harbored 1,195 medical schools. From each country we randomly sampled a maximum of 15 schools yielding 484 schools to be investigated. In total 91% (446) of the curricula were found. Correlation of percent integrated curricula and each dimension of culture was determined by calculating Spearman's Rho. A high score on the Power distance index and a high score on the Uncertainty avoidance index correlated with a low percent integrated curricula; a high score on the Individualism index correlated with a high percent integrated curricula. The percentage integrated curricula in a country did not correlate with its score on the Masculinity index. National culture is associated with the propensity of medical schools to adopt integrated medical curricula. Consequently, medical schools considering introduction of integrated and problem-based medical curricula should take into account dimensions of national culture which may hinder the innovation process.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 21: Technological innovation and technical communications: Their place in aerospace engineering curricula. A survey of European, Japanese, and US Aerospace Engineers and Scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Holland, Maurita Peterson; Keene, Michael L.; Kennedy, John M.

1991-01-01

Aerospace engineers and scientists from Western Europe, Japan, and the United States were surveyed as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Questionnaires were used to solicit their opinions regarding the following: (1) the importance of technical communications to their profession; (2) the use and production of technical communications; and (3) their views about the appropriate content of an undergraduate course in technical communications. The ability to communicate technical information effectively was very important to the aerospace engineers and scientists who participated in the study. A considerable portion of their working week is devoted to using and producing technical information. The types of technical communications used and produced varied within and among the three groups. The type of technical communication product used and produced appears to be related to respondents' professional duties. Respondents from the three groups made similar recommendations regarding the principles, mechanics, and on-the-job communications to be included in an undergraduate technical communications course for aerospace majors.

Research report: learning styles of biomedical engineering students.

PubMed

Dee, Kay C; Nauman, Eric A; Livesay, Glen A; Rice, Janet

2002-09-01

Examining students' learning styles can yield information useful to the design of learning activities, courses, and curricula. A variety of measures have been used to characterize learning styles, but the literature contains little information specific to biomedical engineering (BMEN) students. We, therefore, utilized Felder's Index of Learning Styles to investigate the learning style preferences of BMEN students at Tulane University. Tulane BMEN students preferred to receive information visually (preferred by 88% of the student sample) rather than verbally, focus on sensory information (55%) instead of intuitive information, process information actively (66%) instead of reflectively, and understand information globally (59%) rather than sequentially. These preferences varied between cohorts (freshman, sophomore, etc.) and a significantly higher percentage of female students preferred active and sensing learning styles. Compared to other engineering student populations, our sample of Tulane BMEN students contained the highest percentage of students preferring the global learning style. Whether this is a general trend for all BMEN students or a trait specific to Tulane engineers requires further investigation. Regardless, this study confirms the existence of a range of learning styles within biomedical engineering students, and provides motivation for instructors to consider how well their teaching style engages multiple learning styles.

Developing an evidence-based curriculum designed to help psychiatric nurses learn to use computers and the Internet.

PubMed

Koivunen, Marita; Välimäki, Maritta; Jakobsson, Tiina; Pitkänen, Anneli

2008-01-01

This article describes the systematic process in which an evidence-based approach was used to develop a curriculum designed to support the computer and Internet skills of nurses in psychiatric hospitals in Finland. The pressure on organizations to have skilled and motivated nurses who use modern information and communication technology in health care organizations has increased due to rapid technology development at the international and national levels. However, less frequently has the development of those computer education curricula been based on evidence-based knowledge. First, we identified psychiatric nurses' learning experiences and barriers to computer use by examining written essays. Second, nurses' computer skills were surveyed. Last, evidence from the literature was scrutinized to find effective methods that can be used to teach and learn computer use in health care. This information was integrated and used for the development process of an education curriculum designed to support nurses' computer and Internet skills.