Removing a barrier to computer-based outbreak and disease surveillance--the RODS Open Source Project.

PubMed

Espino, Jeremy U; Wagner, M; Szczepaniak, C; Tsui, F C; Su, H; Olszewski, R; Liu, Z; Chapman, W; Zeng, X; Ma, L; Lu, Z; Dara, J

2004-09-24

Computer-based outbreak and disease surveillance requires high-quality software that is well-supported and affordable. Developing software in an open-source framework, which entails free distribution and use of software and continuous, community-based software development, can produce software with such characteristics, and can do so rapidly. The objective of the Real-Time Outbreak and Disease Surveillance (RODS) Open Source Project is to accelerate the deployment of computer-based outbreak and disease surveillance systems by writing software and catalyzing the formation of a community of users, developers, consultants, and scientists who support its use. The University of Pittsburgh seeded the Open Source Project by releasing the RODS software under the GNU General Public License. An infrastructure was created, consisting of a website, mailing lists for developers and users, designated software developers, and shared code-development tools. These resources are intended to encourage growth of the Open Source Project community. Progress is measured by assessing website usage, number of software downloads, number of inquiries, number of system deployments, and number of new features or modules added to the code base. During September--November 2003, users generated 5,370 page views of the project website, 59 software downloads, 20 inquiries, one new deployment, and addition of four features. Thus far, health departments and companies have been more interested in using the software as is than in customizing or developing new features. The RODS laboratory anticipates that after initial installation has been completed, health departments and companies will begin to customize the software and contribute their enhancements to the public code base.

Trends in computer hardware and software.

PubMed

Frankenfeld, F M

1993-04-01

Previously identified and current trends in the development of computer systems and in the use of computers for health care applications are reviewed. Trends identified in a 1982 article were increasing miniaturization and archival ability, increasing software costs, increasing software independence, user empowerment through new software technologies, shorter computer-system life cycles, and more rapid development and support of pharmaceutical services. Most of these trends continue today. Current trends in hardware and software include the increasing use of reduced instruction-set computing, migration to the UNIX operating system, the development of large software libraries, microprocessor-based smart terminals that allow remote validation of data, speech synthesis and recognition, application generators, fourth-generation languages, computer-aided software engineering, object-oriented technologies, and artificial intelligence. Current trends specific to pharmacy and hospitals are the withdrawal of vendors of hospital information systems from the pharmacy market, improved linkage of information systems within hospitals, and increased regulation by government. The computer industry and its products continue to undergo dynamic change. Software development continues to lag behind hardware, and its high cost is offsetting the savings provided by hardware.

CAD/CAM complete dentures: a review of two commercial fabrication systems.

PubMed

Kattadiyil, Mathew T; Goodacre, Charles J; Baba, Nadim Z

2013-06-01

The use of computer-aided design and computer-aided manufacturing (CAD/CAM) has become available for complete dentures through the AvaDent and Dentca systems. AvaDent uses laser scanning and computer technology. Teeth are arranged and bases formed using proprietary software.The bases are milled from prepolymerized pucks of resin. Dentca uses computer software to produce virtual maxillary and mandibular edentulous ridges, arrange the teeth and form bases. The dentures are fabricated using a conventional processing technique.

Development of simulation computer complex specification

NASA Technical Reports Server (NTRS)

1973-01-01

The Training Simulation Computer Complex Study was one of three studies contracted in support of preparations for procurement of a shuttle mission simulator for shuttle crew training. The subject study was concerned with definition of the software loads to be imposed on the computer complex to be associated with the shuttle mission simulator and the development of procurement specifications based on the resulting computer requirements. These procurement specifications cover the computer hardware and system software as well as the data conversion equipment required to interface the computer to the simulator hardware. The development of the necessary hardware and software specifications required the execution of a number of related tasks which included, (1) simulation software sizing, (2) computer requirements definition, (3) data conversion equipment requirements definition, (4) system software requirements definition, (5) a simulation management plan, (6) a background survey, and (7) preparation of the specifications.

The Hidden Cost of Buying a Computer.

ERIC Educational Resources Information Center

Johnson, Michael

1983-01-01

In order to process data in a computer, application software must be either developed or purchased. Costs for modifications of the software package and maintenance are often hidden. The decision to buy or develop software packages should be based upon factors of time and maintenance. (MLF)

Application of CT-PSF-based computer-simulated lung nodules for evaluating the accuracy of computer-aided volumetry.

PubMed

Funaki, Ayumu; Ohkubo, Masaki; Wada, Shinichi; Murao, Kohei; Matsumoto, Toru; Niizuma, Shinji

2012-07-01

With the wide dissemination of computed tomography (CT) screening for lung cancer, measuring the nodule volume accurately with computer-aided volumetry software is increasingly important. Many studies for determining the accuracy of volumetry software have been performed using a phantom with artificial nodules. These phantom studies are limited, however, in their ability to reproduce the nodules both accurately and in the variety of sizes and densities required. Therefore, we propose a new approach of using computer-simulated nodules based on the point spread function measured in a CT system. The validity of the proposed method was confirmed by the excellent agreement obtained between computer-simulated nodules and phantom nodules regarding the volume measurements. A practical clinical evaluation of the accuracy of volumetry software was achieved by adding simulated nodules onto clinical lung images, including noise and artifacts. The tested volumetry software was revealed to be accurate within an error of 20 % for nodules >5 mm and with the difference between nodule density and background (lung) (CT value) being 400-600 HU. Such a detailed analysis can provide clinically useful information on the use of volumetry software in CT screening for lung cancer. We concluded that the proposed method is effective for evaluating the performance of computer-aided volumetry software.

48 CFR 970.5227-1 - Rights in data-facilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Computer data bases, as used in this clause, means a collection of data in a form capable of, and for the purpose of, being stored in, processed, and operated on by a computer. The term does not include computer software. (2) Computer software, as used in this clause, means (i) computer programs which are data...

48 CFR 970.5227-1 - Rights in data-facilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Computer data bases, as used in this clause, means a collection of data in a form capable of, and for the purpose of, being stored in, processed, and operated on by a computer. The term does not include computer software. (2) Computer software, as used in this clause, means (i) computer programs which are data...

48 CFR 970.5227-1 - Rights in data-facilities.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Computer data bases, as used in this clause, means a collection of data in a form capable of, and for the purpose of, being stored in, processed, and operated on by a computer. The term does not include computer software. (2) Computer software, as used in this clause, means (i) computer programs which are data...

48 CFR 970.5227-1 - Rights in data-facilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Computer data bases, as used in this clause, means a collection of data in a form capable of, and for the purpose of, being stored in, processed, and operated on by a computer. The term does not include computer software. (2) Computer software, as used in this clause, means (i) computer programs which are data...

Architectural Implications of Cloud Computing

DTIC Science & Technology

2011-10-24

Public Cloud Infrastructure-as-a- Service (IaaS) Software -as-a- Service ( SaaS ) Cloud Computing Types Platform-as-a- Service (PaaS) Based on Type of...Twitter #SEIVirtualForum © 2011 Carnegie Mellon University Software -as-a- Service ( SaaS ) Model of software deployment in which a third-party...and System Solutions (RTSS) Program. Her current interests and projects are in service -oriented architecture (SOA), cloud computing, and context

A Novel Rules Based Approach for Estimating Software Birthmark

PubMed Central

Binti Alias, Norma; Anwar, Sajid

2015-01-01

Software birthmark is a unique quality of software to detect software theft. Comparing birthmarks of software can tell us whether a program or software is a copy of another. Software theft and piracy are rapidly increasing problems of copying, stealing, and misusing the software without proper permission, as mentioned in the desired license agreement. The estimation of birthmark can play a key role in understanding the effectiveness of a birthmark. In this paper, a new technique is presented to evaluate and estimate software birthmark based on the two most sought-after properties of birthmarks, that is, credibility and resilience. For this purpose, the concept of soft computing such as probabilistic and fuzzy computing has been taken into account and fuzzy logic is used to estimate properties of birthmark. The proposed fuzzy rule based technique is validated through a case study and the results show that the technique is successful in assessing the specified properties of the birthmark, its resilience and credibility. This, in turn, shows how much effort will be required to detect the originality of the software based on its birthmark. PMID:25945363

The Implications of Cognitive Psychology for Computer-Based Learning Tools.

ERIC Educational Resources Information Center

Kozma, Robert B.

1987-01-01

Defines cognitive computer tools as software programs that use the control capabilities of computers to amplify, extend, or enhance human cognition; suggests seven ways in which computers can aid learning; and describes the "Learning Tool," a software package for the Apple Macintosh microcomputer that is designed to aid learning of…

A new software-based architecture for quantum computer

NASA Astrophysics Data System (ADS)

Wu, Nan; Song, FangMin; Li, Xiangdong

2010-04-01

In this paper, we study a reliable architecture of a quantum computer and a new instruction set and machine language for the architecture, which can improve the performance and reduce the cost of the quantum computing. We also try to address some key issues in detail in the software-driven universal quantum computers.

For operation of the Computer Software Management and Information Center (COSMIC)

NASA Technical Reports Server (NTRS)

Carmon, J. L.

1983-01-01

Computer programs for relational information management data base systems, spherical roller bearing analysis, a generalized pseudoinverse of a rectangular matrix, and software design and documentation language are summarized.

Web-Based Job Submission Interface for the GAMESS Computational Chemistry Program

ERIC Educational Resources Information Center

Perri, M. J.; Weber, S. H.

2014-01-01

A Web site is described that facilitates use of the free computational chemistry software: General Atomic and Molecular Electronic Structure System (GAMESS). Its goal is to provide an opportunity for undergraduate students to perform computational chemistry experiments without the need to purchase expensive software.

Learning Vocabulary in a Foreign Language: A Computer Software Based Model Attempt

ERIC Educational Resources Information Center

Yelbay Yilmaz, Yasemin

2015-01-01

This study aimed at devising a vocabulary learning software that would help learners learn and retain vocabulary items effectively. Foundation linguistics and learning theories have been adapted to the foreign language vocabulary learning context using a computer software named Parole that was designed exclusively for this study. Experimental…

"Horses for Courses": Categories of Computer-Based Learning Program and Their Uses in Pharmacology Courses.

ERIC Educational Resources Information Center

Hughes, Ian E.

1998-01-01

Describes the pharma-CAL-ogy project, funded by Teaching and Learning Technology Programme (TLTP), which has developed various types of software for use in pharmacology courses. Topics include course organization and delivery software, drill and practice software, tutorial-type programs, simulations, and the need to integrate computer-assisted…

Computer-Assisted Instruction in the Context of the Advanced Instructional System: Authoring Support Software. Final Report.

ERIC Educational Resources Information Center

Montgomery, Ann D.; Judd, Wilson A.

This report details the design, development, and implementation of computer software to support the cost-effective production of computer assisted instruction (CAI) within the context of the Advanced Instructional System (AIS) located at Lowry Air Force Base. The report supplements the computer managed Air Force technical training that is…

Computer Center: Software Review.

ERIC Educational Resources Information Center

Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

1988-01-01

Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

Instructional Support Software System. Final Report.

ERIC Educational Resources Information Center

McDonnell Douglas Astronautics Co. - East, St. Louis, MO.

This report describes the development of the Instructional Support System (ISS), a large-scale, computer-based training system that supports both computer-assisted instruction and computer-managed instruction. Written in the Ada programming language, the ISS software package is designed to be machine independent. It is also grouped into functional…

Selecting, Evaluating and Creating Policies for Computer-Based Resources in the Behavioral Sciences and Education.

ERIC Educational Resources Information Center

Richardson, Linda B., Comp.; And Others

This collection includes four handouts: (1) "Selection Critria Considerations for Computer-Based Resources" (Linda B. Richardson); (2) "Software Collection Policies in Academic Libraries" (a 24-item bibliography, Jane W. Johnson); (3) "Circulation and Security of Software" (a 19-item bibliography, Sara Elizabeth Williams); and (4) "Bibliography of…

Development of innovative computer software to facilitate the setup and computation of water quality index.

PubMed

Nabizadeh, Ramin; Valadi Amin, Maryam; Alimohammadi, Mahmood; Naddafi, Kazem; Mahvi, Amir Hossein; Yousefzadeh, Samira

2013-04-26

Developing a water quality index which is used to convert the water quality dataset into a single number is the most important task of most water quality monitoring programmes. As the water quality index setup is based on different local obstacles, it is not feasible to introduce a definite water quality index to reveal the water quality level. In this study, an innovative software application, the Iranian Water Quality Index Software (IWQIS), is presented in order to facilitate calculation of a water quality index based on dynamic weight factors, which will help users to compute the water quality index in cases where some parameters are missing from the datasets. A dataset containing 735 water samples of drinking water quality in different parts of the country was used to show the performance of this software using different criteria parameters. The software proved to be an efficient tool to facilitate the setup of water quality indices based on flexible use of variables and water quality databases.

Use of electronic microprocessor-based instrumentation by the U.S. geological survey for hydrologic data collection

USGS Publications Warehouse

Shope, William G.; ,

1991-01-01

The U.S. Geological Survey is acquiring a new generation of field computers and communications software to support hydrologic data-collection at field locations. The new computer hardware and software mark the beginning of the Survey's transition from the use of electromechanical devices and paper tapes to electronic microprocessor-based instrumentation. Software is being developed for these microprocessors to facilitate the collection, conversion, and entry of data into the Survey's National Water Information System. The new automated data-collection process features several microprocessor-controlled sensors connected to a serial digital multidrop line operated by an electronic data recorder. Data are acquired from the sensors in response to instructions programmed into the data recorder by the user through small portable lap-top or hand-held computers. The portable computers, called personal field computers, also are used to extract data from the electronic recorders for transport by courier to the office computers. The Survey's alternative to manual or courier retrieval is the use of microprocessor-based remote telemetry stations. Plans have been developed to enhance the Survey's use of the Geostationary Operational Environmental Satellite telemetry by replacing the present network of direct-readout ground stations with less expensive units. Plans also provide for computer software that will support other forms of telemetry such as telephone or land-based radio.

Leaf-GP: an open and automated software application for measuring growth phenotypes for arabidopsis and wheat.

PubMed

Zhou, Ji; Applegate, Christopher; Alonso, Albor Dobon; Reynolds, Daniel; Orford, Simon; Mackiewicz, Michal; Griffiths, Simon; Penfield, Steven; Pullen, Nick

2017-01-01

Plants demonstrate dynamic growth phenotypes that are determined by genetic and environmental factors. Phenotypic analysis of growth features over time is a key approach to understand how plants interact with environmental change as well as respond to different treatments. Although the importance of measuring dynamic growth traits is widely recognised, available open software tools are limited in terms of batch image processing, multiple traits analyses, software usability and cross-referencing results between experiments, making automated phenotypic analysis problematic. Here, we present Leaf-GP (Growth Phenotypes), an easy-to-use and open software application that can be executed on different computing platforms. To facilitate diverse scientific communities, we provide three software versions, including a graphic user interface (GUI) for personal computer (PC) users, a command-line interface for high-performance computer (HPC) users, and a well-commented interactive Jupyter Notebook (also known as the iPython Notebook) for computational biologists and computer scientists. The software is capable of extracting multiple growth traits automatically from large image datasets. We have utilised it in Arabidopsis thaliana and wheat ( Triticum aestivum ) growth studies at the Norwich Research Park (NRP, UK). By quantifying a number of growth phenotypes over time, we have identified diverse plant growth patterns between different genotypes under several experimental conditions. As Leaf-GP has been evaluated with noisy image series acquired by different imaging devices (e.g. smartphones and digital cameras) and still produced reliable biological outputs, we therefore believe that our automated analysis workflow and customised computer vision based feature extraction software implementation can facilitate a broader plant research community for their growth and development studies. Furthermore, because we implemented Leaf-GP based on open Python-based computer vision, image analysis and machine learning libraries, we believe that our software not only can contribute to biological research, but also demonstrates how to utilise existing open numeric and scientific libraries (e.g. Scikit-image, OpenCV, SciPy and Scikit-learn) to build sound plant phenomics analytic solutions, in a efficient and effective way. Leaf-GP is a sophisticated software application that provides three approaches to quantify growth phenotypes from large image series. We demonstrate its usefulness and high accuracy based on two biological applications: (1) the quantification of growth traits for Arabidopsis genotypes under two temperature conditions; and (2) measuring wheat growth in the glasshouse over time. The software is easy-to-use and cross-platform, which can be executed on Mac OS, Windows and HPC, with open Python-based scientific libraries preinstalled. Our work presents the advancement of how to integrate computer vision, image analysis, machine learning and software engineering in plant phenomics software implementation. To serve the plant research community, our modulated source code, detailed comments, executables (.exe for Windows; .app for Mac), and experimental results are freely available at https://github.com/Crop-Phenomics-Group/Leaf-GP/releases.

The probability estimation of the electronic lesson implementation taking into account software reliability

NASA Astrophysics Data System (ADS)

Gurov, V. V.

2017-01-01

Software tools for educational purposes, such as e-lessons, computer-based testing system, from the point of view of reliability, have a number of features. The main ones among them are the need to ensure a sufficiently high probability of their faultless operation for a specified time, as well as the impossibility of their rapid recovery by the way of replacing it with a similar running program during the classes. The article considers the peculiarities of reliability evaluation of programs in contrast to assessments of hardware reliability. The basic requirements to reliability of software used for carrying out practical and laboratory classes in the form of computer-based training programs are given. The essential requirements applicable to the reliability of software used for conducting the practical and laboratory studies in the form of computer-based teaching programs are also described. The mathematical tool based on Markov chains, which allows to determine the degree of debugging of the training program for use in the educational process by means of applying the graph of the software modules interaction, is presented.

Choice: 36 band feature selection software with applications to multispectral pattern recognition

NASA Technical Reports Server (NTRS)

Jones, W. C.

1973-01-01

Feature selection software was developed at the Earth Resources Laboratory that is capable of inputting up to 36 channels and selecting channel subsets according to several criteria based on divergence. One of the criterion used is compatible with the table look-up classifier requirements. The software indicates which channel subset best separates (based on average divergence) each class from all other classes. The software employs an exhaustive search technique, and computer time is not prohibitive. A typical task to select the best 4 of 22 channels for 12 classes takes 9 minutes on a Univac 1108 computer.

Architecture independent environment for developing engineering software on MIMD computers

NASA Technical Reports Server (NTRS)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

Exploring Electronics Laboratory Experiments Using Computer Software

ERIC Educational Resources Information Center

Gandole, Yogendra Babarao

2011-01-01

The roles of teachers and students are changing, and there are undoubtedly ways of learning not yet discovered. However, the computer and software technology may provide a significant role to identify the problems, to present solutions and life-long learning. It is clear that the computer based educational technology has reached the point where…

Integration of Computer Technology Into an Introductory-Level Neuroscience Laboratory

ERIC Educational Resources Information Center

Evert, Denise L.; Goodwin, Gregory; Stavnezer, Amy Jo

2005-01-01

We describe 3 computer-based neuroscience laboratories. In the first 2 labs, we used commercially available interactive software to enhance the study of functional and comparative neuroanatomy and neurophysiology. In the remaining lab, we used customized software and hardware in 2 psychophysiological experiments. With the use of the computer-based…

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

ERIC Educational Resources Information Center

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

Computer Game Theories for Designing Motivating Educational Software: A Survey Study

ERIC Educational Resources Information Center

Ang, Chee Siang; Rao, G. S. V. Radha Krishna

2008-01-01

The purpose of this study is to evaluate computer game theories for educational software. We propose a framework for designing engaging educational games based on contemporary game studies which includes ludology and narratology. Ludology focuses on the study of computer games as play and game activities, while narratology revolves around the…

Spacelab experiment computer study. Volume 1: Executive summary (presentation)

NASA Technical Reports Server (NTRS)

Lewis, J. L.; Hodges, B. C.; Christy, J. O.

1976-01-01

A quantitative cost for various Spacelab flight hardware configurations is provided along with varied software development options. A cost analysis of Spacelab computer hardware and software is presented. The cost study is discussed based on utilization of a central experiment computer with optional auxillary equipment. Groundrules and assumptions used in deriving the costing methods for all options in the Spacelab experiment study are presented. The groundrules and assumptions, are analysed and the options along with their cost considerations, are discussed. It is concluded that Spacelab program cost for software development and maintenance is independent of experimental hardware and software options, that distributed standard computer concept simplifies software integration without a significant increase in cost, and that decisions on flight computer hardware configurations should not be made until payload selection for a given mission and a detailed analysis of the mission requirements are completed.

QuBiLS-MIDAS: a parallel free-software for molecular descriptors computation based on multilinear algebraic maps.

PubMed

García-Jacas, César R; Marrero-Ponce, Yovani; Acevedo-Martínez, Liesner; Barigye, Stephen J; Valdés-Martiní, José R; Contreras-Torres, Ernesto

2014-07-05

The present report introduces the QuBiLS-MIDAS software belonging to the ToMoCoMD-CARDD suite for the calculation of three-dimensional molecular descriptors (MDs) based on the two-linear (bilinear), three-linear, and four-linear (multilinear or N-linear) algebraic forms. Thus, it is unique software that computes these tensor-based indices. These descriptors, establish relations for two, three, and four atoms by using several (dis-)similarity metrics or multimetrics, matrix transformations, cutoffs, local calculations and aggregation operators. The theoretical background of these N-linear indices is also presented. The QuBiLS-MIDAS software was developed in the Java programming language and employs the Chemical Development Kit library for the manipulation of the chemical structures and the calculation of the atomic properties. This software is composed by a desktop user-friendly interface and an Abstract Programming Interface library. The former was created to simplify the configuration of the different options of the MDs, whereas the library was designed to allow its easy integration to other software for chemoinformatics applications. This program provides functionalities for data cleaning tasks and for batch processing of the molecular indices. In addition, it offers parallel calculation of the MDs through the use of all available processors in current computers. The studies of complexity of the main algorithms demonstrate that these were efficiently implemented with respect to their trivial implementation. Lastly, the performance tests reveal that this software has a suitable behavior when the amount of processors is increased. Therefore, the QuBiLS-MIDAS software constitutes a useful application for the computation of the molecular indices based on N-linear algebraic maps and it can be used freely to perform chemoinformatics studies. Copyright © 2014 Wiley Periodicals, Inc.

[Development and practice evaluation of blood acid-base imbalance analysis software].

PubMed

Chen, Bo; Huang, Haiying; Zhou, Qiang; Peng, Shan; Jia, Hongyu; Ji, Tianxing

2014-11-01

To develop a blood gas, acid-base imbalance analysis computer software to diagnose systematically, rapidly, accurately and automatically determine acid-base imbalance type, and evaluate the clinical application. Using VBA programming language, a computer aided diagnostic software for the judgment of acid-base balance was developed. The clinical data of 220 patients admitted to the Second Affiliated Hospital of Guangzhou Medical University were retrospectively analyzed. The arterial blood gas [pH value, HCO(3)(-), arterial partial pressure of carbon dioxide (PaCO₂)] and electrolytes included data (Na⁺ and Cl⁻) were collected. Data were entered into the software for acid-base imbalances judgment. At the same time the data generation was calculated manually by H-H compensation formula for determining the type of acid-base imbalance. The consistency of judgment results from software and manual calculation was evaluated, and the judgment time of two methods was compared. The clinical diagnosis of the types of acid-base imbalance for the 220 patients: 65 cases were normal, 90 cases with simple type, mixed type in 41 cases, and triplex type in 24 cases. The accuracy of the judgment results of the normal and triplex types from computer software compared with which were calculated manually was 100%, the accuracy of the simple type judgment was 98.9% and 78.0% for the mixed type, and the total accuracy was 95.5%. The Kappa value of judgment result from software and manual judgment was 0.935, P=0.000. It was demonstrated that the consistency was very good. The time for software to determine acid-base imbalances was significantly shorter than the manual judgment (seconds:18.14 ± 3.80 vs. 43.79 ± 23.86, t=7.466, P=0.000), so the method of software was much faster than the manual method. Software judgment can replace manual judgment with the characteristics of rapid, accurate and convenient, can improve work efficiency and quality of clinical doctors and has great clinical application promotion value.

Design for Run-Time Monitor on Cloud Computing

NASA Astrophysics Data System (ADS)

Kang, Mikyung; Kang, Dong-In; Yun, Mira; Park, Gyung-Leen; Lee, Junghoon

Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is the type of a parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring the system status change, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design Run-Time Monitor (RTM) which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize resources on cloud computing. RTM monitors application software through library instrumentation as well as underlying hardware through performance counter optimizing its computing configuration based on the analyzed data.

An evaluation method of computer usability based on human-to-computer information transmission model.

PubMed

Ogawa, K

1992-01-01

This paper proposes a new evaluation and prediction method for computer usability. This method is based on our two previously proposed information transmission measures created from a human-to-computer information transmission model. The model has three information transmission levels: the device, software, and task content levels. Two measures, called the device independent information measure (DI) and the computer independent information measure (CI), defined on the software and task content levels respectively, are given as the amount of information transmitted. Two information transmission rates are defined as DI/T and CI/T, where T is the task completion time: the device independent information transmission rate (RDI), and the computer independent information transmission rate (RCI). The method utilizes the RDI and RCI rates to evaluate relatively the usability of software and device operations on different computer systems. Experiments using three different systems, in this case a graphical information input task, confirm that the method offers an efficient way of determining computer usability.

Proceedings of Tenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1985-01-01

Papers are presented on the following topics: measurement of software technology, recent studies of the Software Engineering Lab, software management tools, expert systems, error seeding as a program validation technique, software quality assurance, software engineering environments (including knowledge-based environments), the Distributed Computing Design System, and various Ada experiments.

Spin-based quantum computation in multielectron quantum dots

NASA Astrophysics Data System (ADS)

Hu, Xuedong; Das Sarma, S.

2001-10-01

In a quantum computer the hardware and software are intrinsically connected because the quantum Hamiltonian (or more precisely its time development) is the code that runs the computer. We demonstrate this subtle and crucial relationship by considering the example of electron-spin-based solid-state quantum computer in semiconductor quantum dots. We show that multielectron quantum dots with one valence electron in the outermost shell do not behave simply as an effective single-spin system unless special conditions are satisfied. Our work compellingly demonstrates that a delicate synergy between theory and experiment (between software and hardware) is essential for constructing a quantum computer.

An open source software for fast grid-based data-mining in spatial epidemiology (FGBASE).

PubMed

Baker, David M; Valleron, Alain-Jacques

2014-10-30

Examining whether disease cases are clustered in space is an important part of epidemiological research. Another important part of spatial epidemiology is testing whether patients suffering from a disease are more, or less, exposed to environmental factors of interest than adequately defined controls. Both approaches involve determining the number of cases and controls (or population at risk) in specific zones. For cluster searches, this often must be done for millions of different zones. Doing this by calculating distances can lead to very lengthy computations. In this work we discuss the computational advantages of geographical grid-based methods, and introduce an open source software (FGBASE) which we have created for this purpose. Geographical grids based on the Lambert Azimuthal Equal Area projection are well suited for spatial epidemiology because they preserve area: each cell of the grid has the same area. We describe how data is projected onto such a grid, as well as grid-based algorithms for spatial epidemiological data-mining. The software program (FGBASE), that we have developed, implements these grid-based methods. The grid based algorithms perform extremely fast. This is particularly the case for cluster searches. When applied to a cohort of French Type 1 Diabetes (T1D) patients, as an example, the grid based algorithms detected potential clusters in a few seconds on a modern laptop. This compares very favorably to an equivalent cluster search using distance calculations instead of a grid, which took over 4 hours on the same computer. In the case study we discovered 4 potential clusters of T1D cases near the cities of Le Havre, Dunkerque, Toulouse and Nantes. One example of environmental analysis with our software was to study whether a significant association could be found between distance to vineyards with heavy pesticide. None was found. In both examples, the software facilitates the rapid testing of hypotheses. Grid-based algorithms for mining spatial epidemiological data provide advantages in terms of computational complexity thus improving the speed of computations. We believe that these methods and this software tool (FGBASE) will lower the computational barriers to entry for those performing epidemiological research.

Knowledge Based Software Assistant Conference Proceedings (4th) Held in Syracuse, New York on 12-14 September 1989

DTIC Science & Technology

1990-05-01

Sanders Associates. Inc. A demonstration of knowledge-based support for the evolut ;cnry development of software system requirements uskig mitV/9 text...Conference Commiffee W Douga W~t Spin-Off Technologies 4 AN OVERVIEW OF RADC’S KNOWLEDGE BASED SOFTWARE ASSISTANT PROGRAM Donald M. Elefante Rome Air...Knowledge-Based Software Assistant is a formally based, computer-mediated paradigm for the specification, development, evolution , and Ir ig term

Development and Flight Results of a PC104/QNX-Based On-Board Computer and Software for the YES2 Tether Experiment

NASA Astrophysics Data System (ADS)

Spiliotopoulos, I.; Mirmont, M.; Kruijff, M.

2008-08-01

This paper highlights the flight preparation and mission performance of a PC104-based On-Board Computer for ESA's second Young Engineer's Satellite (YES2), with additional attention to the flight software design and experience of QNX as multi-process real-time operating system. This combination of Commercial-Of-The-Shelf (COTS) technologies is an accessible option for small satellites with high computational demands.

COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

NASA Technical Reports Server (NTRS)

Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

2000-01-01

The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

Software Systems for High-performance Quantum Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humble, Travis S; Britt, Keith A

Quantum computing promises new opportunities for solving hard computational problems, but harnessing this novelty requires breakthrough concepts in the design, operation, and application of computing systems. We define some of the challenges facing the development of quantum computing systems as well as software-based approaches that can be used to overcome these challenges. Following a brief overview of the state of the art, we present models for the quantum programming and execution models, the development of architectures for hybrid high-performance computing systems, and the realization of software stacks for quantum networking. This leads to a discussion of the role that conventionalmore » computing plays in the quantum paradigm and how some of the current challenges for exascale computing overlap with those facing quantum computing.« less

Advanced transport operating system software upgrade: Flight management/flight controls software description

NASA Technical Reports Server (NTRS)

Clinedinst, Winston C.; Debure, Kelly R.; Dickson, Richard W.; Heaphy, William J.; Parks, Mark A.; Slominski, Christopher J.; Wolverton, David A.

1988-01-01

The Flight Management/Flight Controls (FM/FC) software for the Norden 2 (PDP-11/70M) computer installed on the NASA 737 aircraft is described. The software computes the navigation position estimates, guidance commands, those commands to be issued to the control surfaces to direct the aircraft in flight based on the modes selected on the Advanced Guidance Control System (AGSC) mode panel, and the flight path selected via the Navigation Control/Display Unit (NCDU).

Large-scale visualization projects for teaching software engineering.

PubMed

Müller, Christoph; Reina, Guido; Burch, Michael; Weiskopf, Daniel

2012-01-01

The University of Stuttgart's software engineering major complements the traditional computer science major with more practice-oriented education. Two-semester software projects in various application areas offered by the university's different computer science institutes are a successful building block in the curriculum. With this realistic, complex project setting, students experience the practice of software engineering, including software development processes, technologies, and soft skills. In particular, visualization-based projects are popular with students. Such projects offer them the opportunity to gain profound knowledge that would hardly be possible with only regular lectures and homework assignments.

A Comparison of the Effects of Lego TC Logo and Problem Solving Software on Elementary Students' Problem Solving Skills.

ERIC Educational Resources Information Center

Palumbo, Debra L; Palumbo, David B.

1993-01-01

Computer-based problem-solving software exposure was compared to Lego TC LOGO instruction. Thirty fifth graders received either Lego LOGO instruction, which couples Lego building block activities with LOGO computer programming, or instruction with various problem-solving computer programs. Although both groups showed significant progress, the Lego…

Automating NEURON Simulation Deployment in Cloud Resources.

PubMed

Stockton, David B; Santamaria, Fidel

2017-01-01

Simulations in neuroscience are performed on local servers or High Performance Computing (HPC) facilities. Recently, cloud computing has emerged as a potential computational platform for neuroscience simulation. In this paper we compare and contrast HPC and cloud resources for scientific computation, then report how we deployed NEURON, a widely used simulator of neuronal activity, in three clouds: Chameleon Cloud, a hybrid private academic cloud for cloud technology research based on the OpenStack software; Rackspace, a public commercial cloud, also based on OpenStack; and Amazon Elastic Cloud Computing, based on Amazon's proprietary software. We describe the manual procedures and how to automate cloud operations. We describe extending our simulation automation software called NeuroManager (Stockton and Santamaria, Frontiers in Neuroinformatics, 2015), so that the user is capable of recruiting private cloud, public cloud, HPC, and local servers simultaneously with a simple common interface. We conclude by performing several studies in which we examine speedup, efficiency, total session time, and cost for sets of simulations of a published NEURON model.

Automating NEURON Simulation Deployment in Cloud Resources

PubMed Central

Santamaria, Fidel

2016-01-01

Simulations in neuroscience are performed on local servers or High Performance Computing (HPC) facilities. Recently, cloud computing has emerged as a potential computational platform for neuroscience simulation. In this paper we compare and contrast HPC and cloud resources for scientific computation, then report how we deployed NEURON, a widely used simulator of neuronal activity, in three clouds: Chameleon Cloud, a hybrid private academic cloud for cloud technology research based on the Open-Stack software; Rackspace, a public commercial cloud, also based on OpenStack; and Amazon Elastic Cloud Computing, based on Amazon’s proprietary software. We describe the manual procedures and how to automate cloud operations. We describe extending our simulation automation software called NeuroManager (Stockton and Santamaria, Frontiers in Neuroinformatics, 2015), so that the user is capable of recruiting private cloud, public cloud, HPC, and local servers simultaneously with a simple common interface. We conclude by performing several studies in which we examine speedup, efficiency, total session time, and cost for sets of simulations of a published NEURON model. PMID:27655341

Software Trends and Trendsetters: How They're Shaping an Industry.

ERIC Educational Resources Information Center

McGinty, Tony; And Others

1987-01-01

Discusses trends in educational software and the effects of new developments on publishers and on the computer industry. Marketing prospects for software are examined, and recent advances are highlighted, including integrated learning systems, skill-based software, software tied to textbooks, networking, and freeware. (LRW)

Evaluation of Computer Based Foreign Language Learning Software by Teachers and Students

ERIC Educational Resources Information Center

Baz, Fatih Çagatay; Tekdal, Mehmet

2014-01-01

The aim of this study is to evaluate Computer Based Foreign Language Learning software called Dynamic Education (DYNED) by teachers and students. The study is conducted with randomly chosen ten primary schools with the participants of 522 7th grade students and 7 English teachers. Three points Likert scale for teachers and five points Likert scale…

An Automated Weather Research and Forecasting (WRF)-Based Nowcasting System: Software Description

DTIC Science & Technology

2013-10-01

14. ABSTRACT A Web service /Web interface software package has been engineered to address the need for an automated means to run the Weather Research...An Automated Weather Research and Forecasting (WRF)- Based Nowcasting System: Software Description by Stephen F. Kirby, Brian P. Reen, and...Based Nowcasting System: Software Description Stephen F. Kirby, Brian P. Reen, and Robert E. Dumais Jr. Computational and Information Sciences

Development of innovative computer software to facilitate the setup and computation of water quality index

PubMed Central

2013-01-01

Background Developing a water quality index which is used to convert the water quality dataset into a single number is the most important task of most water quality monitoring programmes. As the water quality index setup is based on different local obstacles, it is not feasible to introduce a definite water quality index to reveal the water quality level. Findings In this study, an innovative software application, the Iranian Water Quality Index Software (IWQIS), is presented in order to facilitate calculation of a water quality index based on dynamic weight factors, which will help users to compute the water quality index in cases where some parameters are missing from the datasets. Conclusion A dataset containing 735 water samples of drinking water quality in different parts of the country was used to show the performance of this software using different criteria parameters. The software proved to be an efficient tool to facilitate the setup of water quality indices based on flexible use of variables and water quality databases. PMID:24499556

TMS communications software. Volume 2: Bus interface unit

NASA Technical Reports Server (NTRS)

Gregor, P. J.

1979-01-01

A data bus communication system to support the space shuttle's Trend Monitoring System (TMS) and to provide a basis for evaluation of the bus concept is described. Installation of the system included developing both hardware and software interfaces between the bus and the specific TMS computers and terminals. The software written for the microprocessor-based bus interface units is described. The software implements both the general bus communications protocol and also the specific interface protocols for the TMS computers and terminals.

Software Framework for Peer Data-Management Services

NASA Technical Reports Server (NTRS)

Hughes, John; Hardman, Sean; Crichton, Daniel; Hyon, Jason; Kelly, Sean; Tran, Thuy

2007-01-01

Object Oriented Data Technology (OODT) is a software framework for creating a Web-based system for exchange of scientific data that are stored in diverse formats on computers at different sites under the management of scientific peers. OODT software consists of a set of cooperating, distributed peer components that provide distributed peer-to-peer (P2P) services that enable one peer to search and retrieve data managed by another peer. In effect, computers running OODT software at different locations become parts of an integrated data-management system.

PP-SWAT: A phython-based computing software for efficient multiobjective callibration of SWAT

USDA-ARS?s Scientific Manuscript database

With enhanced data availability, distributed watershed models for large areas with high spatial and temporal resolution are increasingly used to understand water budgets and examine effects of human activities and climate change/variability on water resources. Developing parallel computing software...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

Enhancing Lecture Presentations in Introductory Biology with Computer-Based Multimedia.

ERIC Educational Resources Information Center

Fifield, Steve; Peifer, Rick

1994-01-01

Uses illustrations and text to discuss convenient ways to organize and present computer-based multimedia to students in lecture classes. Includes the following topics: (1) Effects of illustrations on learning; (2) Using computer-based illustrations in lecture; (3) MacPresents-Multimedia Presentation Software; (4) Advantages of computer-based…

A Grid Infrastructure for Supporting Space-based Science Operations

NASA Technical Reports Server (NTRS)

Bradford, Robert N.; Redman, Sandra H.; McNair, Ann R. (Technical Monitor)

2002-01-01

Emerging technologies for computational grid infrastructures have the potential for revolutionizing the way computers are used in all aspects of our lives. Computational grids are currently being implemented to provide a large-scale, dynamic, and secure research and engineering environments based on standards and next-generation reusable software, enabling greater science and engineering productivity through shared resources and distributed computing for less cost than traditional architectures. Combined with the emerging technologies of high-performance networks, grids provide researchers, scientists and engineers the first real opportunity for an effective distributed collaborative environment with access to resources such as computational and storage systems, instruments, and software tools and services for the most computationally challenging applications.

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2014 CFR

2014-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2011 CFR

2011-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2012 CFR

2012-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2010 CFR

2010-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2013 CFR

2013-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

Agile Development of Various Computational Power Adaptive Web-Based Mobile-Learning Software Using Mobile Cloud Computing

ERIC Educational Resources Information Center

Zadahmad, Manouchehr; Yousefzadehfard, Parisa

2016-01-01

Mobile Cloud Computing (MCC) aims to improve all mobile applications such as m-learning systems. This study presents an innovative method to use web technology and software engineering's best practices to provide m-learning functionalities hosted in a MCC-learning system as service. Components hosted by MCC are used to empower developers to create…

Effectiveness of Various Computer-Based Instructional Strategies in Language Teaching. Final Report, November 1, 1969-August 31, 1970.

ERIC Educational Resources Information Center

Van Campen, Joseph A.

Computer software for programed language instruction, developed in the second quarter of 1970 at Stanford's Institute for Mathematical Studies in the Social Sciences is described in this report. The software includes: (1) a PDP-10 computer assembly language for generating drill sentences; (2) a coding system allowing a large number of sentences to…

Software designs of image processing tasks with incremental refinement of computation.

PubMed

Anastasia, Davide; Andreopoulos, Yiannis

2010-08-01

Software realizations of computationally-demanding image processing tasks (e.g., image transforms and convolution) do not currently provide graceful degradation when their clock-cycles budgets are reduced, e.g., when delay deadlines are imposed in a multitasking environment to meet throughput requirements. This is an important obstacle in the quest for full utilization of modern programmable platforms' capabilities since worst-case considerations must be in place for reasonable quality of results. In this paper, we propose (and make available online) platform-independent software designs performing bitplane-based computation combined with an incremental packing framework in order to realize block transforms, 2-D convolution and frame-by-frame block matching. The proposed framework realizes incremental computation: progressive processing of input-source increments improves the output quality monotonically. Comparisons with the equivalent nonincremental software realization of each algorithm reveal that, for the same precision of the result, the proposed approach can lead to comparable or faster execution, while it can be arbitrarily terminated and provide the result up to the computed precision. Application examples with region-of-interest based incremental computation, task scheduling per frame, and energy-distortion scalability verify that our proposal provides significant performance scalability with graceful degradation.

Guidelines for Processing and Cataloging Computer Software for Schools and Area Education Agencies. Suggestions to Aid Schools and AEAs.

ERIC Educational Resources Information Center

Martin, Elizabeth; And Others

Based on definitions of a machine-readable data file (MRDF) taken from the Anglo-American Cataloging Rules, second edition (AACR2) and Standards for Cataloging Nonprint Materials, the following recommendations for processing items of computer software are provided: (1) base main and added entry determination on AACR2; (2) place designation of form…

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2011 CFR

2011-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2013 CFR

2013-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2012 CFR

2012-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2014 CFR

2014-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2010 CFR

2010-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

A specialized plug-in software module for computer-aided quantitative measurement of medical images.

PubMed

Wang, Q; Zeng, Y J; Huo, P; Hu, J L; Zhang, J H

2003-12-01

This paper presents a specialized system for quantitative measurement of medical images. Using Visual C++, we developed a computer-aided software based on Image-Pro Plus (IPP), a software development platform. When transferred to the hard disk of a computer by an MVPCI-V3A frame grabber, medical images can be automatically processed by our own IPP plug-in for immunohistochemical analysis, cytomorphological measurement and blood vessel segmentation. In 34 clinical studies, the system has shown its high stability, reliability and ease of utility.

Design and Development of a Run-Time Monitor for Multi-Core Architectures in Cloud Computing

PubMed Central

Kang, Mikyung; Kang, Dong-In; Crago, Stephen P.; Park, Gyung-Leen; Lee, Junghoon

2011-01-01

Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is a type of parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring system status changes, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design and develop a Run-Time Monitor (RTM) which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize cloud computing resources for multi-core architectures. RTM monitors application software through library instrumentation as well as underlying hardware through a performance counter optimizing its computing configuration based on the analyzed data. PMID:22163811

Design and development of a run-time monitor for multi-core architectures in cloud computing.

PubMed

Kang, Mikyung; Kang, Dong-In; Crago, Stephen P; Park, Gyung-Leen; Lee, Junghoon

2011-01-01

Cloud computing is a new information technology trend that moves computing and data away from desktops and portable PCs into large data centers. The basic principle of cloud computing is to deliver applications as services over the Internet as well as infrastructure. A cloud is a type of parallel and distributed system consisting of a collection of inter-connected and virtualized computers that are dynamically provisioned and presented as one or more unified computing resources. The large-scale distributed applications on a cloud require adaptive service-based software, which has the capability of monitoring system status changes, analyzing the monitored information, and adapting its service configuration while considering tradeoffs among multiple QoS features simultaneously. In this paper, we design and develop a Run-Time Monitor (RTM) which is a system software to monitor the application behavior at run-time, analyze the collected information, and optimize cloud computing resources for multi-core architectures. RTM monitors application software through library instrumentation as well as underlying hardware through a performance counter optimizing its computing configuration based on the analyzed data.

Accuracy and efficiency of computer-aided anatomical analysis using 3D visualization software based on semi-automated and automated segmentations.

PubMed

An, Gao; Hong, Li; Zhou, Xiao-Bing; Yang, Qiong; Li, Mei-Qing; Tang, Xiang-Yang

2017-03-01

We investigated and compared the functionality of two 3D visualization software provided by a CT vendor and a third-party vendor, respectively. Using surgical anatomical measurement as baseline, we evaluated the accuracy of 3D visualization and verified their utility in computer-aided anatomical analysis. The study cohort consisted of 50 adult cadavers fixed with the classical formaldehyde method. The computer-aided anatomical analysis was based on CT images (in DICOM format) acquired by helical scan with contrast enhancement, using a CT vendor provided 3D visualization workstation (Syngo) and a third-party 3D visualization software (Mimics) that was installed on a PC. Automated and semi-automated segmentations were utilized in the 3D visualization workstation and software, respectively. The functionality and efficiency of automated and semi-automated segmentation methods were compared. Using surgical anatomical measurement as a baseline, the accuracy of 3D visualization based on automated and semi-automated segmentations was quantitatively compared. In semi-automated segmentation, the Mimics 3D visualization software outperformed the Syngo 3D visualization workstation. No significant difference was observed in anatomical data measurement by the Syngo 3D visualization workstation and the Mimics 3D visualization software (P>0.05). Both the Syngo 3D visualization workstation provided by a CT vendor and the Mimics 3D visualization software by a third-party vendor possessed the needed functionality, efficiency and accuracy for computer-aided anatomical analysis. Copyright © 2016 Elsevier GmbH. All rights reserved.

Eleven quick tips for architecting biomedical informatics workflows with cloud computing.

PubMed

Cole, Brian S; Moore, Jason H

2018-03-01

Cloud computing has revolutionized the development and operations of hardware and software across diverse technological arenas, yet academic biomedical research has lagged behind despite the numerous and weighty advantages that cloud computing offers. Biomedical researchers who embrace cloud computing can reap rewards in cost reduction, decreased development and maintenance workload, increased reproducibility, ease of sharing data and software, enhanced security, horizontal and vertical scalability, high availability, a thriving technology partner ecosystem, and much more. Despite these advantages that cloud-based workflows offer, the majority of scientific software developed in academia does not utilize cloud computing and must be migrated to the cloud by the user. In this article, we present 11 quick tips for architecting biomedical informatics workflows on compute clouds, distilling knowledge gained from experience developing, operating, maintaining, and distributing software and virtualized appliances on the world's largest cloud. Researchers who follow these tips stand to benefit immediately by migrating their workflows to cloud computing and embracing the paradigm of abstraction.

Eleven quick tips for architecting biomedical informatics workflows with cloud computing

PubMed Central

Moore, Jason H.

2018-01-01

Cloud computing has revolutionized the development and operations of hardware and software across diverse technological arenas, yet academic biomedical research has lagged behind despite the numerous and weighty advantages that cloud computing offers. Biomedical researchers who embrace cloud computing can reap rewards in cost reduction, decreased development and maintenance workload, increased reproducibility, ease of sharing data and software, enhanced security, horizontal and vertical scalability, high availability, a thriving technology partner ecosystem, and much more. Despite these advantages that cloud-based workflows offer, the majority of scientific software developed in academia does not utilize cloud computing and must be migrated to the cloud by the user. In this article, we present 11 quick tips for architecting biomedical informatics workflows on compute clouds, distilling knowledge gained from experience developing, operating, maintaining, and distributing software and virtualized appliances on the world’s largest cloud. Researchers who follow these tips stand to benefit immediately by migrating their workflows to cloud computing and embracing the paradigm of abstraction. PMID:29596416

Cloud Computing. Technology Briefing. Number 1

ERIC Educational Resources Information Center

Alberta Education, 2013

2013-01-01

Cloud computing is Internet-based computing in which shared resources, software and information are delivered as a service that computers or mobile devices can access on demand. Cloud computing is already used extensively in education. Free or low-cost cloud-based services are used daily by learners and educators to support learning, social…

Woods Hole Image Processing System Software implementation; using NetCDF as a software interface for image processing

USGS Publications Warehouse

Paskevich, Valerie F.

1992-01-01

The Branch of Atlantic Marine Geology has been involved in the collection, processing and digital mosaicking of high, medium and low-resolution side-scan sonar data during the past 6 years. In the past, processing and digital mosaicking has been accomplished with a dedicated, shore-based computer system. With the need to process sidescan data in the field with increased power and reduced cost of major workstations, a need to have an image processing package on a UNIX based computer system which could be utilized in the field as well as be more generally available to Branch personnel was identified. This report describes the initial development of that package referred to as the Woods Hole Image Processing System (WHIPS). The software was developed using the Unidata NetCDF software interface to allow data to be more readily portable between different computer operating systems.

Program For Generating Interactive Displays

NASA Technical Reports Server (NTRS)

Costenbader, Jay; Moleski, Walt; Szczur, Martha; Howell, David; Engelberg, Norm; Li, Tin P.; Misra, Dharitri; Miller, Philip; Neve, Leif; Wolf, Karl;

Another Program For Generating Interactive Graphics

NASA Technical Reports Server (NTRS)

Costenbader, Jay; Moleski, Walt; Szczur, Martha; Howell, David; Engelberg, Norm; Li, Tin P.; Misra, Dharitri; Miller, Philip; Neve, Leif; Wolf, Karl;

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

A Computer Supported Teamwork Project for People with a Visual Impairment.

ERIC Educational Resources Information Center

Hale, Greg

2000-01-01

Discussion of the use of computer supported teamwork (CSTW) in team-based organizations focuses on problems that visually impaired people have reading graphical user interface software via screen reader software. Describes a project that successfully used email for CSTW, and suggests issues needing further research. (LRW)

Training Programs in Applications Software.

ERIC Educational Resources Information Center

Modianos, Doan T.; Cornwell, Larry W.

1988-01-01

Description of training programs for using business applications software highlights implementing programs for Lotus 1-2-3 and dBASE III Plus. The amount of computer experience of the users and the difference in training methods needed are discussed, and the use of a Macintosh computer for producing notes is explained. (LRW)

Real-Time, Sensor-Based Computing in the Laboratory.

ERIC Educational Resources Information Center

Badmus, O. O.; And Others

1996-01-01

Demonstrates the importance of Real-Time, Sensor-Based (RTSB) computing and how it can be easily and effectively integrated into university student laboratories. Describes the experimental processes, the process instrumentation and process-computer interface, the computer and communications systems, and typical software. Provides much technical…

Software Carpentry and the Hydrological Sciences

NASA Astrophysics Data System (ADS)

Ahmadia, A. J.; Kees, C. E.; Farthing, M. W.

2013-12-01

Scientists are spending an increasing amount of time building and using hydrology software. However, most scientists are never taught how to do this efficiently. As a result, many are unaware of tools and practices that would allow them to write more reliable and maintainable code with less effort. As hydrology models increase in capability and enter use by a growing number of scientists and their communities, it is important that the scientific software development practices scale up to meet the challenges posed by increasing software complexity, lengthening software lifecycles, a growing number of stakeholders and contributers, and a broadened developer base that extends from application domains to high performance computing centers. Many of these challenges in complexity, lifecycles, and developer base have been successfully met by the open source community, and there are many lessons to be learned from their experiences and practices. Additionally, there is much wisdom to be found in the results of research studies conducted on software engineering itself. Software Carpentry aims to bridge the gap between the current state of software development and these known best practices for scientific software development, with a focus on hands-on exercises and practical advice based on the following principles: 1. Write programs for people, not computers. 2. Automate repetitive tasks 3. Use the computer to record history 4. Make incremental changes 5. Use version control 6. Don't repeat yourself (or others) 7. Plan for mistakes 8. Optimize software only after it works 9. Document design and purpose, not mechanics 10. Collaborate We discuss how these best practices, arising from solid foundations in research and experience, have been shown to help improve scientist's productivity and the reliability of their software.

The Macintosh Based Design Studio.

ERIC Educational Resources Information Center

Earle, Daniel W., Jr.

1988-01-01

Describes the configuration of a workstation for a college design studio based on the Macintosh Plus microcomputer. Highlights include cost estimates, computer hardware peripherals, computer aided design software, networked studios, and potentials for new approaches to design activity in the computer based studio of the future. (Author/LRW)

Computational methods and software systems for dynamics and control of large space structures

NASA Technical Reports Server (NTRS)

Park, K. C.; Felippa, C. A.; Farhat, C.; Pramono, E.

1990-01-01

Two key areas of crucial importance to the computer-based simulation of large space structures are discussed. The first area involves multibody dynamics (MBD) of flexible space structures, with applications directed to deployment, construction, and maneuvering. The second area deals with advanced software systems, with emphasis on parallel processing. The latest research thrust in the second area involves massively parallel computers.

An alternative model to distribute VO software to WLCG sites based on CernVM-FS: a prototype at PIC Tier1

NASA Astrophysics Data System (ADS)

Lanciotti, E.; Merino, G.; Bria, A.; Blomer, J.

2011-12-01

In a distributed computing model as WLCG the software of experiment specific application software has to be efficiently distributed to any site of the Grid. Application software is currently installed in a shared area of the site visible for all Worker Nodes (WNs) of the site through some protocol (NFS, AFS or other). The software is installed at the site by jobs which run on a privileged node of the computing farm where the shared area is mounted in write mode. This model presents several drawbacks which cause a non-negligible rate of job failure. An alternative model for software distribution based on the CERN Virtual Machine File System (CernVM-FS) has been tried at PIC, the Spanish Tierl site of WLCG. The test bed used and the results are presented in this paper.

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

RTSPM: real-time Linux control software for scanning probe microscopy.

PubMed

Chandrasekhar, V; Mehta, M M

2013-01-01

Real time computer control is an essential feature of scanning probe microscopes, which have become important tools for the characterization and investigation of nanometer scale samples. Most commercial (and some open-source) scanning probe data acquisition software uses digital signal processors to handle the real time data processing and control, which adds to the expense and complexity of the control software. We describe here scan control software that uses a single computer and a data acquisition card to acquire scan data. The computer runs an open-source real time Linux kernel, which permits fast acquisition and control while maintaining a responsive graphical user interface. Images from a simulated tuning-fork based microscope as well as a standard topographical sample are also presented, showing some of the capabilities of the software.

Computer-Based Instruction (CBI): Considerations for a User-Oriented Technology Data Base.

DTIC Science & Technology

1985-10-14

CBI works primarily because of the systematic attention to instructional material it brings to the development process , and the extent to which quality...looked at CBI software multi-use potential, support and maintenance from a joint service perspective, and described requirements for a software...computer support for some aspect of the instructional process . Personnel involved in other TDAC projects are reviewing commercially available CBI and

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

Computing Radiative Transfer in a 3D Medium

NASA Technical Reports Server (NTRS)

Von Allmen, Paul; Lee, Seungwon

2012-01-01

A package of software computes the time-dependent propagation of a narrow laser beam in an arbitrary three- dimensional (3D) medium with absorption and scattering, using the transient-discrete-ordinates method and a direct integration method. Unlike prior software that utilizes a Monte Carlo method, this software enables simulation at very small signal-to-noise ratios. The ability to simulate propagation of a narrow laser beam in a 3D medium is an improvement over other discrete-ordinate software. Unlike other direct-integration software, this software is not limited to simulation of propagation of thermal radiation with broad angular spread in three dimensions or of a laser pulse with narrow angular spread in two dimensions. Uses for this software include (1) computing scattering of a pulsed laser beam on a material having given elastic scattering and absorption profiles, and (2) evaluating concepts for laser-based instruments for sensing oceanic turbulence and related measurements of oceanic mixed-layer depths. With suitable augmentation, this software could be used to compute radiative transfer in ultrasound imaging in biological tissues, radiative transfer in the upper Earth crust for oil exploration, and propagation of laser pulses in telecommunication applications.

Fusing Symbolic and Numerical Diagnostic Computations

NASA Technical Reports Server (NTRS)

James, Mark

2007-01-01

X-2000 Anomaly Detection Language denotes a developmental computing language, and the software that establishes and utilizes the language, for fusing two diagnostic computer programs, one implementing a numerical analysis method, the other implementing a symbolic analysis method into a unified event-based decision analysis software system for realtime detection of events (e.g., failures) in a spacecraft, aircraft, or other complex engineering system. The numerical analysis method is performed by beacon-based exception analysis for multi-missions (BEAMs), which has been discussed in several previous NASA Tech Briefs articles. The symbolic analysis method is, more specifically, an artificial-intelligence method of the knowledge-based, inference engine type, and its implementation is exemplified by the Spacecraft Health Inference Engine (SHINE) software. The goal in developing the capability to fuse numerical and symbolic diagnostic components is to increase the depth of analysis beyond that previously attainable, thereby increasing the degree of confidence in the computed results. In practical terms, the sought improvement is to enable detection of all or most events, with no or few false alarms.

The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

ERIC Educational Resources Information Center

Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

2016-01-01

This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

Designing Educational Software for Tomorrow.

ERIC Educational Resources Information Center

Harvey, Wayne

Designed to address the management and use of computer software in education and training, this paper explores both good and poor software design, calling for improvements in the quality of educational software by attending to design considerations that are based on general principles of learning rather than specific educational objectives. This…

Teaching Agile Software Development: A Case Study

ERIC Educational Resources Information Center

Devedzic, V.; Milenkovic, S. R.

2011-01-01

This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

Image Processing Occupancy Sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Image Processing Occupancy Sensor, or IPOS, is a novel sensor technology developed at the National Renewable Energy Laboratory (NREL). The sensor is based on low-cost embedded microprocessors widely used by the smartphone industry and leverages mature open-source computer vision software libraries. Compared to traditional passive infrared and ultrasonic-based motion sensors currently used for occupancy detection, IPOS has shown the potential for improved accuracy and a richer set of feedback signals for occupant-optimized lighting, daylighting, temperature setback, ventilation control, and other occupancy and location-based uses. Unlike traditional passive infrared (PIR) or ultrasonic occupancy sensors, which infer occupancy based only onmore » motion, IPOS uses digital image-based analysis to detect and classify various aspects of occupancy, including the presence of occupants regardless of motion, their number, location, and activity levels of occupants, as well as the illuminance properties of the monitored space. The IPOS software leverages the recent availability of low-cost embedded computing platforms, computer vision software libraries, and camera elements.« less

Software Tools for Development on the Peregrine System | High-Performance

Science.gov Websites

Computing | NREL Software Tools for Development on the Peregrine System Software Tools for and manage software at the source code level. Cross-Platform Make and SCons The "Cross-Platform Make" (CMake) package is from Kitware, and SCons is a modern software build tool based on Python

Fast computational scheme of image compression for 32-bit microprocessors

NASA Technical Reports Server (NTRS)

Kasperovich, Leonid

1994-01-01

This paper presents a new computational scheme of image compression based on the discrete cosine transform (DCT), underlying JPEG and MPEG International Standards. The algorithm for the 2-d DCT computation uses integer operations (register shifts and additions / subtractions only); its computational complexity is about 8 additions per image pixel. As a meaningful example of an on-board image compression application we consider the software implementation of the algorithm for the Mars Rover (Marsokhod, in Russian) imaging system being developed as a part of Mars-96 International Space Project. It's shown that fast software solution for 32-bit microprocessors may compete with the DCT-based image compression hardware.

From data to analysis: linking NWChem and Avogadro with the syntax and semantics of Chemical Markup Language

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Jong, Wibe A.; Walker, Andrew M.; Hanwell, Marcus D.

Background Multidisciplinary integrated research requires the ability to couple the diverse sets of data obtained from a range of complex experiments and computer simulations. Integrating data requires semantically rich information. In this paper the generation of semantically rich data from the NWChem computational chemistry software is discussed within the Chemical Markup Language (CML) framework. Results The NWChem computational chemistry software has been modified and coupled to the FoX library to write CML compliant XML data files. The FoX library was expanded to represent the lexical input files used by the computational chemistry software. Conclusions The production of CML compliant XMLmore » files for the computational chemistry software NWChem can be relatively easily accomplished using the FoX library. A unified computational chemistry or CompChem convention and dictionary needs to be developed through a community-based effort. The long-term goal is to enable a researcher to do Google-style chemistry and physics searches.« less

A regional land use survey based on remote sensing and other data: A report on a LANDSAT and computer mapping project, volume 1. [Arizona, Colorado, Montana, New Mexico, Utah, and Wyoming

NASA Technical Reports Server (NTRS)

Nez, G. (Principal Investigator); Mutter, D.

1977-01-01

The author has identified the following significant results. New LANDSAT analysis software and linkages with other computer mapping software were developed. Significant results were also achieved in training, communication, and identification of needs for developing the LANDSAT/computer mapping technologies into operational tools for use by decision makers.

Stereo Vision Inside Tire

DTIC Science & Technology

2015-08-21

using the Open Computer Vision ( OpenCV ) libraries [6] for computer vision and the Qt library [7] for the user interface. The software has the...depth. The software application calibrates the cameras using the plane based calibration model from the OpenCV calib3D module and allows the...6] OpenCV . 2015. OpenCV Open Source Computer Vision. [Online]. Available at: opencv.org [Accessed]: 09/01/2015. [7] Qt. 2015. Qt Project home

Automatic Generation of Overlays and Offset Values Based on Visiting Vehicle Telemetry and RWS Visuals

NASA Technical Reports Server (NTRS)

Dunne, Matthew J.

2011-01-01

The development of computer software as a tool to generate visual displays has led to an overall expansion of automated computer generated images in the aerospace industry. These visual overlays are generated by combining raw data with pre-existing data on the object or objects being analyzed on the screen. The National Aeronautics and Space Administration (NASA) uses this computer software to generate on-screen overlays when a Visiting Vehicle (VV) is berthing with the International Space Station (ISS). In order for Mission Control Center personnel to be a contributing factor in the VV berthing process, computer software similar to that on the ISS must be readily available on the ground to be used for analysis. In addition, this software must perform engineering calculations and save data for further analysis.

Using Articulate Virtual Laboratories in Teaching Energy Conversion at the U.S. Naval Academy.

ERIC Educational Resources Information Center

Wu, C.

1998-01-01

The Mechanical Engineering Department at the U.S. Naval Academy is currently evaluating a new teaching method which uses computer software. Utilizing the thermodynamic-based software CyclePad, Intelligent Computer Aided Instruction is incorporated in an advanced energy conversion course for Mechanical Engineering students. The CyclePad software…

An Interactive Computer-Based Training Program for Beginner Personal Computer Maintenance.

ERIC Educational Resources Information Center

Summers, Valerie Brooke

A computer-assisted instructional program, which was developed for teaching beginning computer maintenance to employees of Unisys, covered external hardware maintenance, proper diskette care, making software backups, and electro-static discharge prevention. The procedure used in developing the program was based upon the Dick and Carey (1985) model…

Availability of software services for a hospital information system.

PubMed

Sakamoto, N

1998-03-01

Hospital information systems (HISs) are becoming more important and covering more parts in daily hospital operations as order-entry systems become popular and electronic charts are introduced. Thus, HISs today need to be able to provide necessary services for hospital operations for a 24-h day, 365 days a year. The provision of services discussed here does not simply mean the availability of computers, in which all that matters is that the computer is functioning. It means the provision of necessary information for hospital operations by the computer software, and we will call it the availability of software services. HISs these days are mostly client-server systems. To increase availability of software services in these systems, it is not enough to just use system structures that are highly reliable in existing host-centred systems. Four main components which support availability of software services are network systems, client computers, server computers, and application software. In this paper, we suggest how to structure these four components to provide the minimum requested software services even if a part of the system stops to function. The network system should be double-protected in stratus using Asynchronous Transfer Mode (ATM) as its base network. Client computers should be fat clients with as much application logic as possible, and reference information which do not require frequent updates (master files, for example) should be replicated in clients. It would be best if all server computers could be double-protected. However, if that is physically impossible, one database file should be made accessible by several server computers. Still, at least the basic patients' information and the latest clinical records should be double-protected physically. Application software should be tested carefully before introduction. Different versions of the application software should always be kept and managed in case the new version has problems. If a hospital information system is designed and developed with these points in mind, it's availability of software services should increase greatly.

Hyperswitch Communication Network Computer

NASA Technical Reports Server (NTRS)

Peterson, John C.; Chow, Edward T.; Priel, Moshe; Upchurch, Edwin T.

1993-01-01

Hyperswitch Communications Network (HCN) computer is prototype multiple-processor computer being developed. Incorporates improved version of hyperswitch communication network described in "Hyperswitch Network For Hypercube Computer" (NPO-16905). Designed to support high-level software and expansion of itself. HCN computer is message-passing, multiple-instruction/multiple-data computer offering significant advantages over older single-processor and bus-based multiple-processor computers, with respect to price/performance ratio, reliability, availability, and manufacturing. Design of HCN operating-system software provides flexible computing environment accommodating both parallel and distributed processing. Also achieves balance among following competing factors; performance in processing and communications, ease of use, and tolerance of (and recovery from) faults.

Fragment-Based Docking: Development of the CHARMMing Web User Interface as a Platform for Computer-Aided Drug Design

PubMed Central

2015-01-01

Web-based user interfaces to scientific applications are important tools that allow researchers to utilize a broad range of software packages with just an Internet connection and a browser.1 One such interface, CHARMMing (CHARMM interface and graphics), facilitates access to the powerful and widely used molecular software package CHARMM. CHARMMing incorporates tasks such as molecular structure analysis, dynamics, multiscale modeling, and other techniques commonly used by computational life scientists. We have extended CHARMMing’s capabilities to include a fragment-based docking protocol that allows users to perform molecular docking and virtual screening calculations either directly via the CHARMMing Web server or on computing resources using the self-contained job scripts generated via the Web interface. The docking protocol was evaluated by performing a series of “re-dockings” with direct comparison to top commercial docking software. Results of this evaluation showed that CHARMMing’s docking implementation is comparable to many widely used software packages and validates the use of the new CHARMM generalized force field for docking and virtual screening. PMID:25151852

Fragment-based docking: development of the CHARMMing Web user interface as a platform for computer-aided drug design.

PubMed

Pevzner, Yuri; Frugier, Emilie; Schalk, Vinushka; Caflisch, Amedeo; Woodcock, H Lee

2014-09-22

Web-based user interfaces to scientific applications are important tools that allow researchers to utilize a broad range of software packages with just an Internet connection and a browser. One such interface, CHARMMing (CHARMM interface and graphics), facilitates access to the powerful and widely used molecular software package CHARMM. CHARMMing incorporates tasks such as molecular structure analysis, dynamics, multiscale modeling, and other techniques commonly used by computational life scientists. We have extended CHARMMing's capabilities to include a fragment-based docking protocol that allows users to perform molecular docking and virtual screening calculations either directly via the CHARMMing Web server or on computing resources using the self-contained job scripts generated via the Web interface. The docking protocol was evaluated by performing a series of "re-dockings" with direct comparison to top commercial docking software. Results of this evaluation showed that CHARMMing's docking implementation is comparable to many widely used software packages and validates the use of the new CHARMM generalized force field for docking and virtual screening.

Software Validation via Model Animation

NASA Technical Reports Server (NTRS)

Dutle, Aaron M.; Munoz, Cesar A.; Narkawicz, Anthony J.; Butler, Ricky W.

2015-01-01

This paper explores a new approach to validating software implementations that have been produced from formally-verified algorithms. Although visual inspection gives some confidence that the implementations faithfully reflect the formal models, it does not provide complete assurance that the software is correct. The proposed approach, which is based on animation of formal specifications, compares the outputs computed by the software implementations on a given suite of input values to the outputs computed by the formal models on the same inputs, and determines if they are equal up to a given tolerance. The approach is illustrated on a prototype air traffic management system that computes simple kinematic trajectories for aircraft. Proofs for the mathematical models of the system's algorithms are carried out in the Prototype Verification System (PVS). The animation tool PVSio is used to evaluate the formal models on a set of randomly generated test cases. Output values computed by PVSio are compared against output values computed by the actual software. This comparison improves the assurance that the translation from formal models to code is faithful and that, for example, floating point errors do not greatly affect correctness and safety properties.

A Software Engineering Approach based on WebML and BPMN to the Mediation Scenario of the SWS Challenge

NASA Astrophysics Data System (ADS)

Brambilla, Marco; Ceri, Stefano; Valle, Emanuele Della; Facca, Federico M.; Tziviskou, Christina

Although Semantic Web Services are expected to produce a revolution in the development of Web-based systems, very few enterprise-wide design experiences are available; one of the main reasons is the lack of sound Software Engineering methods and tools for the deployment of Semantic Web applications. In this chapter, we present an approach to software development for the Semantic Web based on classical Software Engineering methods (i.e., formal business process development, computer-aided and component-based software design, and automatic code generation) and on semantic methods and tools (i.e., ontology engineering, semantic service annotation and discovery).

Real-time computing platform for spiking neurons (RT-spike).

PubMed

Ros, Eduardo; Ortigosa, Eva M; Agís, Rodrigo; Carrillo, Richard; Arnold, Michael

2006-07-01

A computing platform is described for simulating arbitrary networks of spiking neurons in real time. A hybrid computing scheme is adopted that uses both software and hardware components to manage the tradeoff between flexibility and computational power; the neuron model is implemented in hardware and the network model and the learning are implemented in software. The incremental transition of the software components into hardware is supported. We focus on a spike response model (SRM) for a neuron where the synapses are modeled as input-driven conductances. The temporal dynamics of the synaptic integration process are modeled with a synaptic time constant that results in a gradual injection of charge. This type of model is computationally expensive and is not easily amenable to existing software-based event-driven approaches. As an alternative we have designed an efficient time-based computing architecture in hardware, where the different stages of the neuron model are processed in parallel. Further improvements occur by computing multiple neurons in parallel using multiple processing units. This design is tested using reconfigurable hardware and its scalability and performance evaluated. Our overall goal is to investigate biologically realistic models for the real-time control of robots operating within closed action-perception loops, and so we evaluate the performance of the system on simulating a model of the cerebellum where the emulation of the temporal dynamics of the synaptic integration process is important.

A comparison of traditional textbook and interactive computer learning of neuromuscular block.

PubMed

Ohrn, M A; van Oostrom, J H; van Meurs, W L

1997-03-01

We designed an educational software package, RELAX, for teaching first-year anesthesiology residents about the pharmacology and clinical management of neuromuscular blockade. The software uses an interactive, problem-based approach and moves the user through cases in an operating room environment. It can be run on personal computers with Microsoft Windows (Microsoft Corp., Redmond, WA) and combines video, graphics, and text with mouse-driven user input. We utilized test scores 1) to determine whether our software was beneficial to be the educational progress of anesthesiology residents and 2) to compare computer-based learning with textbook learning. Twenty-three residents were divided into two groups matched for age and sex, and a pretest was administered to all 23 residents. There was no significant difference (P > 0.05) in the pretest scores of the two groups. Three weeks later, both groups were subjected to an educational intervention; one with our computer software and the other with selected textbooks. Both groups took a posttest immediately after the intervention. The test scores of the computer group improved significantly more (P < 0.05) than those of the textbook group. Although prior to the study the two groups showed no statistical difference in their familiarity with computers, the computer group reported much higher satisfaction with their learning experience than did the textbook group (P < 0.0001).

System support software for the Space Ultrareliable Modular Computer (SUMC)

NASA Technical Reports Server (NTRS)

Hill, T. E.; Hintze, G. C.; Hodges, B. C.; Austin, F. A.; Buckles, B. P.; Curran, R. T.; Lackey, J. D.; Payne, R. E.

1974-01-01

The highly transportable programming system designed and implemented to support the development of software for the Space Ultrareliable Modular Computer (SUMC) is described. The SUMC system support software consists of program modules called processors. The initial set of processors consists of the supervisor, the general purpose assembler for SUMC instruction and microcode input, linkage editors, an instruction level simulator, a microcode grid print processor, and user oriented utility programs. A FORTRAN 4 compiler is undergoing development. The design facilitates the addition of new processors with a minimum effort and provides the user quasi host independence on the ground based operational software development computer. Additional capability is provided to accommodate variations in the SUMC architecture without consequent major modifications in the initial processors.

Real-time autocorrelator for fluorescence correlation spectroscopy based on graphical-processor-unit architecture: method, implementation, and comparative studies

NASA Astrophysics Data System (ADS)

Laracuente, Nicholas; Grossman, Carl

2013-03-01

We developed an algorithm and software to calculate autocorrelation functions from real-time photon-counting data using the fast, parallel capabilities of graphical processor units (GPUs). Recent developments in hardware and software have allowed for general purpose computing with inexpensive GPU hardware. These devices are more suited for emulating hardware autocorrelators than traditional CPU-based software applications by emphasizing parallel throughput over sequential speed. Incoming data are binned in a standard multi-tau scheme with configurable points-per-bin size and are mapped into a GPU memory pattern to reduce time-expensive memory access. Applications include dynamic light scattering (DLS) and fluorescence correlation spectroscopy (FCS) experiments. We ran the software on a 64-core graphics pci card in a 3.2 GHz Intel i5 CPU based computer running Linux. FCS measurements were made on Alexa-546 and Texas Red dyes in a standard buffer (PBS). Software correlations were compared to hardware correlator measurements on the same signals. Supported by HHMI and Swarthmore College

Spacelab user implementation assessment study. (Software requirements analysis). Volume 2: Technical report

NASA Technical Reports Server (NTRS)

1976-01-01

The engineering analyses and evaluation studies conducted for the Software Requirements Analysis are discussed. Included are the development of the study data base, synthesis of implementation approaches for software required by both mandatory onboard computer services and command/control functions, and identification and implementation of software for ground processing activities.

A Reconfigurable Simulation-Based Test System for Automatically Assessing Software Operating Skills

ERIC Educational Resources Information Center

Su, Jun-Ming; Lin, Huan-Yu

2015-01-01

In recent years, software operating skills, the ability in computer literacy to solve problems using specific software, has become much more important. A great deal of research has also proven that students' software operating skills can be efficiently improved by practicing customized virtual and simulated examinations. However, constructing…

AADL and Model-based Engineering

DTIC Science & Technology

2014-10-20

and MBE Feiler, Oct 20, 2014 © 2014 Carnegie Mellon University We Rely on Software for Safe Aircraft Operation Embedded software systems ...D eveloper Compute Platform Runtime Architecture Application Software Embedded SW System Engineer Data Stream Characteristics Latency...confusion Hardware Engineer Why do system level failures still occur despite fault tolerance techniques being deployed in systems ? Embedded software

Molecular Isotopic Distribution Analysis (MIDAs) with Adjustable Mass Accuracy

NASA Astrophysics Data System (ADS)

Alves, Gelio; Ogurtsov, Aleksey Y.; Yu, Yi-Kuo

2014-01-01

In this paper, we present Molecular Isotopic Distribution Analysis (MIDAs), a new software tool designed to compute molecular isotopic distributions with adjustable accuracies. MIDAs offers two algorithms, one polynomial-based and one Fourier-transform-based, both of which compute molecular isotopic distributions accurately and efficiently. The polynomial-based algorithm contains few novel aspects, whereas the Fourier-transform-based algorithm consists mainly of improvements to other existing Fourier-transform-based algorithms. We have benchmarked the performance of the two algorithms implemented in MIDAs with that of eight software packages (BRAIN, Emass, Mercury, Mercury5, NeutronCluster, Qmass, JFC, IC) using a consensus set of benchmark molecules. Under the proposed evaluation criteria, MIDAs's algorithms, JFC, and Emass compute with comparable accuracy the coarse-grained (low-resolution) isotopic distributions and are more accurate than the other software packages. For fine-grained isotopic distributions, we compared IC, MIDAs's polynomial algorithm, and MIDAs's Fourier transform algorithm. Among the three, IC and MIDAs's polynomial algorithm compute isotopic distributions that better resemble their corresponding exact fine-grained (high-resolution) isotopic distributions. MIDAs can be accessed freely through a user-friendly web-interface at http://www.ncbi.nlm.nih.gov/CBBresearch/Yu/midas/index.html.

Molecular Isotopic Distribution Analysis (MIDAs) with adjustable mass accuracy.

PubMed

Alves, Gelio; Ogurtsov, Aleksey Y; Yu, Yi-Kuo

2014-01-01

In this paper, we present Molecular Isotopic Distribution Analysis (MIDAs), a new software tool designed to compute molecular isotopic distributions with adjustable accuracies. MIDAs offers two algorithms, one polynomial-based and one Fourier-transform-based, both of which compute molecular isotopic distributions accurately and efficiently. The polynomial-based algorithm contains few novel aspects, whereas the Fourier-transform-based algorithm consists mainly of improvements to other existing Fourier-transform-based algorithms. We have benchmarked the performance of the two algorithms implemented in MIDAs with that of eight software packages (BRAIN, Emass, Mercury, Mercury5, NeutronCluster, Qmass, JFC, IC) using a consensus set of benchmark molecules. Under the proposed evaluation criteria, MIDAs's algorithms, JFC, and Emass compute with comparable accuracy the coarse-grained (low-resolution) isotopic distributions and are more accurate than the other software packages. For fine-grained isotopic distributions, we compared IC, MIDAs's polynomial algorithm, and MIDAs's Fourier transform algorithm. Among the three, IC and MIDAs's polynomial algorithm compute isotopic distributions that better resemble their corresponding exact fine-grained (high-resolution) isotopic distributions. MIDAs can be accessed freely through a user-friendly web-interface at http://www.ncbi.nlm.nih.gov/CBBresearch/Yu/midas/index.html.

The Effects of the Use of Activity-Based Costing Software in the Learning Process: An Empirical Analysis

ERIC Educational Resources Information Center

Tan, Andrea; Ferreira, Aldónio

2012-01-01

This study investigates the influence of the use of accounting software in teaching activity-based costing (ABC) on the learning process. It draws upon the Theory of Planned Behaviour and uses the end-user computer satisfaction (EUCS) framework to examine students' satisfaction with the ABC software. The study examines students' satisfaction with…

Algorithm-Based Fault Tolerance for Numerical Subroutines

NASA Technical Reports Server (NTRS)

Tumon, Michael; Granat, Robert; Lou, John

2007-01-01

A software library implements a new methodology of detecting faults in numerical subroutines, thus enabling application programs that contain the subroutines to recover transparently from single-event upsets. The software library in question is fault-detecting middleware that is wrapped around the numericalsubroutines. Conventional serial versions (based on LAPACK and FFTW) and a parallel version (based on ScaLAPACK) exist. The source code of the application program that contains the numerical subroutines is not modified, and the middleware is transparent to the user. The methodology used is a type of algorithm- based fault tolerance (ABFT). In ABFT, a checksum is computed before a computation and compared with the checksum of the computational result; an error is declared if the difference between the checksums exceeds some threshold. Novel normalization methods are used in the checksum comparison to ensure correct fault detections independent of algorithm inputs. In tests of this software reported in the peer-reviewed literature, this library was shown to enable detection of 99.9 percent of significant faults while generating no false alarms.

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

Protecting software agents from malicious hosts using quantum computing

NASA Astrophysics Data System (ADS)

Reisner, John; Donkor, Eric

2000-07-01

We evaluate how quantum computing can be applied to security problems for software agents. Agent-based computing, which merges technological advances in artificial intelligence and mobile computing, is a rapidly growing domain, especially in applications such as electronic commerce, network management, information retrieval, and mission planning. System security is one of the more eminent research areas in agent-based computing, and the specific problem of protecting a mobile agent from a potentially hostile host is one of the most difficult of these challenges. In this work, we describe our agent model, and discuss the capabilities and limitations of classical solutions to the malicious host problem. Quantum computing may be extremely helpful in addressing the limitations of classical solutions to this problem. This paper highlights some of the areas where quantum computing could be applied to agent security.

A Management Information System for Allocating, Monitoring and Reviewing Work Assignments.

DTIC Science & Technology

1986-06-01

This thesis investigated the feasibility of developing a small scale management information system on a micro-computer. The working system was...ORSA journal. The management information system was designed using Ashton-Tate’s dBaseIII software. As designed, the system will operate on any...computer operating under microsoft’s Disk Operating System (MS-DOS). The user must provide his own dBaseIII software. A similar management information system could

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

Design Process of a Goal-Based Scenario on Computing Fundamentals

ERIC Educational Resources Information Center

Beriswill, Joanne Elizabeth

2014-01-01

In this design case, an instructor developed a goal-based scenario (GBS) for undergraduate computer fundamentals students to apply their knowledge of computer equipment and software. The GBS, entitled the MegaTech Project, presented the students with descriptions of the everyday activities of four persons needing to purchase a computer system. The…

Modeling Teaching with a Computer-Based Concordancer in a TESL Preservice Teacher Education Program.

ERIC Educational Resources Information Center

Gan, Siowck-Lee; And Others

1996-01-01

This study modeled teaching with a computer-based concordancer in a Teaching English-as-a-Second-Language program. Preservice teachers were randomly assigned to work with computer concordancing software or vocabulary exercises to develop word attack skills. Pretesting and posttesting indicated that computer concordancing was more effective in…

The Development and Evaluation of a Software Prototype for Computer-Adaptive Testing

ERIC Educational Resources Information Center

Lilley, M.; Barker, T.; Britton, C.

2004-01-01

This paper presents ongoing research at the University of Hertfordshire on the use of computer-adaptive tests (CATs) in Higher Education. A software prototype based on Item Response Theory has been developed and is described here. This application was designed to estimate the level of proficiency in English for those students whose first language…

IMS - MS Data Extractor

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-10-20

An automated drift time extraction and computed associated collision cross section software tool for small molecule analysis with ion mobility spectrometry-mass spectrometry (IMS-MS). The software automatically extracts drift times and computes associated collision cross sections for small molecules analyzed using ion mobility spectrometry-mass spectrometry (IMS-MS) based on a target list of expected ions provided by the user.

Software Simplifies the Sharing of Numerical Models

NASA Technical Reports Server (NTRS)

2014-01-01

To ease the sharing of climate models with university students, Goddard Space Flight Center awarded SBIR funding to Reston, Virginia-based Parabon Computation Inc., a company that specializes in cloud computing. The firm developed a software program capable of running climate models over the Internet, and also created an online environment for people to collaborate on developing such models.

Tracking-Data-Conversion Tool

NASA Technical Reports Server (NTRS)

Flora-Adams, Dana; Makihara, Jeanne; Benenyan, Zabel; Berner, Jeff; Kwok, Andrew

2007-01-01

Object Oriented Data Technology (OODT) is a software framework for creating a Web-based system for exchange of scientific data that are stored in diverse formats on computers at different sites under the management of scientific peers. OODT software consists of a set of cooperating, distributed peer components that provide distributed peer-topeer (P2P) services that enable one peer to search and retrieve data managed by another peer. In effect, computers running OODT software at different locations become parts of an integrated data-management system.

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

PuMA: the Porous Microstructure Analysis software

NASA Astrophysics Data System (ADS)

Ferguson, Joseph C.; Panerai, Francesco; Borner, Arnaud; Mansour, Nagi N.

2018-01-01

The Porous Microstructure Analysis (PuMA) software has been developed in order to compute effective material properties and perform material response simulations on digitized microstructures of porous media. PuMA is able to import digital three-dimensional images obtained from X-ray microtomography or to generate artificial microstructures. PuMA also provides a module for interactive 3D visualizations. Version 2.1 includes modules to compute porosity, volume fractions, and surface area. Two finite difference Laplace solvers have been implemented to compute the continuum tortuosity factor, effective thermal conductivity, and effective electrical conductivity. A random method has been developed to compute tortuosity factors from the continuum to rarefied regimes. Representative elementary volume analysis can be performed on each property. The software also includes a time-dependent, particle-based model for the oxidation of fibrous materials. PuMA was developed for Linux operating systems and is available as a NASA software under a US & Foreign release.

Analytical exploration of the thermodynamic potentials by using symbolic computation software

NASA Astrophysics Data System (ADS)

Hantsaridou, Anastasia P.; Polatoglou, Hariton M.

2005-09-01

Thermodynamics is a very general theory, based on fundamental symmetries. It generalizes classical mechanics and incorporates theoretical concepts such as field and field equations. Although all these ingredients are of the highest importance for a scientist, they are not given the attention they perhaps deserve in most undergraduate courses. Nowadays, powerful computers in conjunction with equally powerful software can ease the exploration of the crucial ideas of thermodynamics. The purpose of the present work is to show how the utilization of symbolic computation software can lead to a complementary understanding of thermodynamics. The method was applied to first and second year physics students in the Aristotle University of Thessaloniki (Greece) during the 2002-2003 academic year. The results indicate that symbolic computation software is appropriate not only for enhancing the teaching of the fundamental principles in thermodynamics and their applications, but also for increasing students' motivation for learning.

Software/hardware distributed processing network supporting the Ada environment

NASA Astrophysics Data System (ADS)

Wood, Richard J.; Pryk, Zen

1993-09-01

A high-performance, fault-tolerant, distributed network has been developed, tested, and demonstrated. The network is based on the MIPS Computer Systems, Inc. R3000 Risc for processing, VHSIC ASICs for high speed, reliable, inter-node communications and compatible commercial memory and I/O boards. The network is an evolution of the Advanced Onboard Signal Processor (AOSP) architecture. It supports Ada application software with an Ada- implemented operating system. A six-node implementation (capable of expansion up to 256 nodes) of the RISC multiprocessor architecture provides 120 MIPS of scalar throughput, 96 Mbytes of RAM and 24 Mbytes of non-volatile memory. The network provides for all ground processing applications, has merit for space-qualified RISC-based network, and interfaces to advanced Computer Aided Software Engineering (CASE) tools for application software development.

Preliminary description of the area navigation software for a microcomputer-based Loran-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

The development of new software implementation of this software on a microcomputer (MOS 6502) to provide high quality navigation information is described. This software development provides Area/Route Navigation (RNAV) information from Time Differences (TDs) in raw form using an elliptical Earth model and a spherical model. The software is prepared for the microcomputer based Loran-C receiver. To compute navigation infomation, a (MOS 6502) microcomputer and a mathematical chip (AM 9511A) were combined with the Loran-C receiver. Final data reveals that this software does indeed provide accurate information with reasonable execution times.

Guideline for Software Documentation Management.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

Designed as a basic reference for federal personnel concerned with the development, maintenance, enhancement, control, and management of computer-based systems, this manual provides a general overview of the software development process and software documentation issues so that managers can assess their own documentation requirements. Reference is…

The equipment access software for a distributed UNIX-based accelerator control system

NASA Astrophysics Data System (ADS)

Trofimov, Nikolai; Zelepoukine, Serguei; Zharkov, Eugeny; Charrue, Pierre; Gareyte, Claire; Poirier, Hervé

1994-12-01

This paper presents a generic equipment access software package for a distributed control system using computers with UNIX or UNIX-like operating systems. The package consists of three main components, an application Equipment Access Library, Message Handler and Equipment Data Base. An application task, which may run in any computer in the network, sends requests to access equipment through Equipment Library calls. The basic request is in the form Equipment-Action-Data and is routed via a remote procedure call to the computer to which the given equipment is connected. In this computer the request is received by the Message Handler. According to the type of the equipment connection, the Message Handler either passes the request to the specific process software in the same computer or forwards it to a lower level network of equipment controllers using MIL1553B, GPIB, RS232 or BITBUS communication. The answer is then returned to the calling application. Descriptive information required for request routing and processing is stored in the real-time Equipment Data Base. The package has been written to be portable and is currently available on DEC Ultrix, LynxOS, HPUX, XENIX, OS-9 and Apollo domain.

Computational methods and software systems for dynamics and control of large space structures

NASA Technical Reports Server (NTRS)

Park, K. C.; Felippa, C. A.; Farhat, C.; Pramono, E.

1990-01-01

This final report on computational methods and software systems for dynamics and control of large space structures covers progress to date, projected developments in the final months of the grant, and conclusions. Pertinent reports and papers that have not appeared in scientific journals (or have not yet appeared in final form) are enclosed. The grant has supported research in two key areas of crucial importance to the computer-based simulation of large space structure. The first area involves multibody dynamics (MBD) of flexible space structures, with applications directed to deployment, construction, and maneuvering. The second area deals with advanced software systems, with emphasis on parallel processing. The latest research thrust in the second area, as reported here, involves massively parallel computers.

Overview of the TriBITS Lifecycle Model: Lean/Agile Software Lifecycle Model for Research-based Computational Science and Engineering Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Roscoe A; Heroux, Dr. Michael A; Willenbring, James

2012-01-01

Software lifecycles are becoming an increasingly important issue for computational science & engineering (CSE) software. The process by which a piece of CSE software begins life as a set of research requirements and then matures into a trusted high-quality capability is both commonplace and extremely challenging. Although an implicit lifecycle is obviously being used in any effort, the challenges of this process--respecting the competing needs of research vs. production--cannot be overstated. Here we describe a proposal for a well-defined software lifecycle process based on modern Lean/Agile software engineering principles. What we propose is appropriate for many CSE software projects thatmore » are initially heavily focused on research but also are expected to eventually produce usable high-quality capabilities. The model is related to TriBITS, a build, integration and testing system, which serves as a strong foundation for this lifecycle model, and aspects of this lifecycle model are ingrained in the TriBITS system. Indeed this lifecycle process, if followed, will enable large-scale sustainable integration of many complex CSE software efforts across several institutions.« less

Computer Center: Software Review: The DynaPulse 200M.

ERIC Educational Resources Information Center

Pankiewicz, Philip R., Ed.

1995-01-01

Reviews the DynaPulse 200M Education Edition microcomputer-based laboratory, which combines interactive software with curriculum and medical instrumentation to teach students about the cardiovascular system. (MKR)

High-Performance Mixed Models Based Genome-Wide Association Analysis with omicABEL software

PubMed Central

Fabregat-Traver, Diego; Sharapov, Sodbo Zh.; Hayward, Caroline; Rudan, Igor; Campbell, Harry; Aulchenko, Yurii; Bientinesi, Paolo

2014-01-01

To raise the power of genome-wide association studies (GWAS) and avoid false-positive results in structured populations, one can rely on mixed model based tests. When large samples are used, and when multiple traits are to be studied in the ’omics’ context, this approach becomes computationally challenging. Here we consider the problem of mixed-model based GWAS for arbitrary number of traits, and demonstrate that for the analysis of single-trait and multiple-trait scenarios different computational algorithms are optimal. We implement these optimal algorithms in a high-performance computing framework that uses state-of-the-art linear algebra kernels, incorporates optimizations, and avoids redundant computations, increasing throughput while reducing memory usage and energy consumption. We show that, compared to existing libraries, our algorithms and software achieve considerable speed-ups. The OmicABEL software described in this manuscript is available under the GNU GPL v. 3 license as part of the GenABEL project for statistical genomics at http: //www.genabel.org/packages/OmicABEL. PMID:25717363

High-Performance Mixed Models Based Genome-Wide Association Analysis with omicABEL software.

PubMed

Fabregat-Traver, Diego; Sharapov, Sodbo Zh; Hayward, Caroline; Rudan, Igor; Campbell, Harry; Aulchenko, Yurii; Bientinesi, Paolo

2014-01-01

To raise the power of genome-wide association studies (GWAS) and avoid false-positive results in structured populations, one can rely on mixed model based tests. When large samples are used, and when multiple traits are to be studied in the 'omics' context, this approach becomes computationally challenging. Here we consider the problem of mixed-model based GWAS for arbitrary number of traits, and demonstrate that for the analysis of single-trait and multiple-trait scenarios different computational algorithms are optimal. We implement these optimal algorithms in a high-performance computing framework that uses state-of-the-art linear algebra kernels, incorporates optimizations, and avoids redundant computations, increasing throughput while reducing memory usage and energy consumption. We show that, compared to existing libraries, our algorithms and software achieve considerable speed-ups. The OmicABEL software described in this manuscript is available under the GNU GPL v. 3 license as part of the GenABEL project for statistical genomics at http: //www.genabel.org/packages/OmicABEL.

Shaping Software Engineering Curricula Using Open Source Communities: A Case Study

ERIC Educational Resources Information Center

Bowring, James; Burke, Quinn

2016-01-01

This paper documents four years of a novel approach to teaching a two-course sequence in software engineering as part of the ABET-accredited computer science curriculum at the College of Charleston. This approach is team-based and centers on learning software engineering in the context of open source software projects. In the first course, teams…

A Software Laboratory Environment for Computer-Based Problem Solving.

ERIC Educational Resources Information Center

Kurtz, Barry L.; O'Neal, Micheal B.

This paper describes a National Science Foundation-sponsored project at Louisiana Technological University to develop computer-based laboratories for "hands-on" introductions to major topics of computer science. The underlying strategy is to develop structured laboratory environments that present abstract concepts through the use of…

Structure-sequence based analysis for identification of conserved regions in proteins

DOEpatents

Zemla, Adam T; Zhou, Carol E; Lam, Marisa W; Smith, Jason R; Pardes, Elizabeth

2013-05-28

Disclosed are computational methods, and associated hardware and software products for scoring conservation in a protein structure based on a computationally identified family or cluster of protein structures. A method of computationally identifying a family or cluster of protein structures in also disclosed herein.

Development of Computer-Based Resources for Textile Education.

ERIC Educational Resources Information Center

Hopkins, Teresa; Thomas, Andrew; Bailey, Mike

1998-01-01

Describes the production of computer-based resources for students of textiles and engineering in the United Kingdom. Highlights include funding by the Teaching and Learning Technology Programme (TLTP), courseware author/subject expert interaction, usage test and evaluation, authoring software, graphics, computer-aided design simulation, self-test…

NEXUS - Resilient Intelligent Middleware

NASA Astrophysics Data System (ADS)

Kaveh, N.; Hercock, R. Ghanea

Service-oriented computing, a composition of distributed-object computing, component-based, and Web-based concepts, is becoming the widespread choice for developing dynamic heterogeneous software assets available as services across a network. One of the major strengths of service-oriented technologies is the high abstraction layer and large granularity level at which software assets are viewed compared to traditional object-oriented technologies. Collaboration through encapsulated and separately defined service interfaces creates a service-oriented environment, whereby multiple services can be linked together through their interfaces to compose a functional system. This approach enables better integration of legacy and non-legacy services, via wrapper interfaces, and allows for service composition at a more abstract level especially in cases such as vertical market stacks. The heterogeneous nature of service-oriented technologies and the granularity of their software components makes them a suitable computing model in the pervasive domain.

Design and Implementation of Hybrid CORDIC Algorithm Based on Phase Rotation Estimation for NCO

PubMed Central

Zhang, Chaozhu; Han, Jinan; Li, Ke

2014-01-01

The numerical controlled oscillator has wide application in radar, digital receiver, and software radio system. Firstly, this paper introduces the traditional CORDIC algorithm. Then in order to improve computing speed and save resources, this paper proposes a kind of hybrid CORDIC algorithm based on phase rotation estimation applied in numerical controlled oscillator (NCO). Through estimating the direction of part phase rotation, the algorithm reduces part phase rotation and add-subtract unit, so that it decreases delay. Furthermore, the paper simulates and implements the numerical controlled oscillator by Quartus II software and Modelsim software. Finally, simulation results indicate that the improvement over traditional CORDIC algorithm is achieved in terms of ease of computation, resource utilization, and computing speed/delay while maintaining the precision. It is suitable for high speed and precision digital modulation and demodulation. PMID:25110750

Parameters that affect parallel processing for computational electromagnetic simulation codes on high performance computing clusters

NASA Astrophysics Data System (ADS)

Moon, Hongsik

What is the impact of multicore and associated advanced technologies on computational software for science? Most researchers and students have multicore laptops or desktops for their research and they need computing power to run computational software packages. Computing power was initially derived from Central Processing Unit (CPU) clock speed. That changed when increases in clock speed became constrained by power requirements. Chip manufacturers turned to multicore CPU architectures and associated technological advancements to create the CPUs for the future. Most software applications benefited by the increased computing power the same way that increases in clock speed helped applications run faster. However, for Computational ElectroMagnetics (CEM) software developers, this change was not an obvious benefit - it appeared to be a detriment. Developers were challenged to find a way to correctly utilize the advancements in hardware so that their codes could benefit. The solution was parallelization and this dissertation details the investigation to address these challenges. Prior to multicore CPUs, advanced computer technologies were compared with the performance using benchmark software and the metric was FLoting-point Operations Per Seconds (FLOPS) which indicates system performance for scientific applications that make heavy use of floating-point calculations. Is FLOPS an effective metric for parallelized CEM simulation tools on new multicore system? Parallel CEM software needs to be benchmarked not only by FLOPS but also by the performance of other parameters related to type and utilization of the hardware, such as CPU, Random Access Memory (RAM), hard disk, network, etc. The codes need to be optimized for more than just FLOPs and new parameters must be included in benchmarking. In this dissertation, the parallel CEM software named High Order Basis Based Integral Equation Solver (HOBBIES) is introduced. This code was developed to address the needs of the changing computer hardware platforms in order to provide fast, accurate and efficient solutions to large, complex electromagnetic problems. The research in this dissertation proves that the performance of parallel code is intimately related to the configuration of the computer hardware and can be maximized for different hardware platforms. To benchmark and optimize the performance of parallel CEM software, a variety of large, complex projects are created and executed on a variety of computer platforms. The computer platforms used in this research are detailed in this dissertation. The projects run as benchmarks are also described in detail and results are presented. The parameters that affect parallel CEM software on High Performance Computing Clusters (HPCC) are investigated. This research demonstrates methods to maximize the performance of parallel CEM software code.

A dictionary based informational genome analysis

PubMed Central

2012-01-01

Background In the post-genomic era several methods of computational genomics are emerging to understand how the whole information is structured within genomes. Literature of last five years accounts for several alignment-free methods, arisen as alternative metrics for dissimilarity of biological sequences. Among the others, recent approaches are based on empirical frequencies of DNA k-mers in whole genomes. Results Any set of words (factors) occurring in a genome provides a genomic dictionary. About sixty genomes were analyzed by means of informational indexes based on genomic dictionaries, where a systemic view replaces a local sequence analysis. A software prototype applying a methodology here outlined carried out some computations on genomic data. We computed informational indexes, built the genomic dictionaries with different sizes, along with frequency distributions. The software performed three main tasks: computation of informational indexes, storage of these in a database, index analysis and visualization. The validation was done by investigating genomes of various organisms. A systematic analysis of genomic repeats of several lengths, which is of vivid interest in biology (for example to compute excessively represented functional sequences, such as promoters), was discussed, and suggested a method to define synthetic genetic networks. Conclusions We introduced a methodology based on dictionaries, and an efficient motif-finding software application for comparative genomics. This approach could be extended along many investigation lines, namely exported in other contexts of computational genomics, as a basis for discrimination of genomic pathologies. PMID:22985068

Computer sciences

NASA Technical Reports Server (NTRS)

Smith, Paul H.

1988-01-01

The Computer Science Program provides advanced concepts, techniques, system architectures, algorithms, and software for both space and aeronautics information sciences and computer systems. The overall goal is to provide the technical foundation within NASA for the advancement of computing technology in aerospace applications. The research program is improving the state of knowledge of fundamental aerospace computing principles and advancing computing technology in space applications such as software engineering and information extraction from data collected by scientific instruments in space. The program includes the development of special algorithms and techniques to exploit the computing power provided by high performance parallel processors and special purpose architectures. Research is being conducted in the fundamentals of data base logic and improvement techniques for producing reliable computing systems.

A PICKSC Science Gateway for enabling the common plasma physicist to run kinetic software

NASA Astrophysics Data System (ADS)

Hu, Q.; Winjum, B. J.; Zonca, A.; Youn, C.; Tsung, F. S.; Mori, W. B.

2017-10-01

Computer simulations offer tremendous opportunities for studying plasmas, ranging from simulations for students that illuminate fundamental educational concepts to research-level simulations that advance scientific knowledge. Nevertheless, there is a significant hurdle to using simulation tools. Users must navigate codes and software libraries, determine how to wrangle output into meaningful plots, and oftentimes confront a significant cyberinfrastructure with powerful computational resources. Science gateways offer a Web-based environment to run simulations without needing to learn or manage the underlying software and computing cyberinfrastructure. We discuss our progress on creating a Science Gateway for the Particle-in-Cell and Kinetic Simulation Software Center that enables users to easily run and analyze kinetic simulations with our software. We envision that this technology could benefit a wide range of plasma physicists, both in the use of our simulation tools as well as in its adaptation for running other plasma simulation software. Supported by NSF under Grant ACI-1339893 and by the UCLA Institute for Digital Research and Education.

Telescience workstation

NASA Technical Reports Server (NTRS)

Brown, Robert L.; Doyle, Dee; Haines, Richard F.; Slocum, Michael

1989-01-01

As part of the Telescience Testbed Pilot Program, the Universities Space Research Association/ Research Institute for Advanced Computer Science (USRA/RIACS) proposed to support remote communication by providing a network of human/machine interfaces, computer resources, and experimental equipment which allows: remote science, collaboration, technical exchange, and multimedia communication. The telescience workstation is intended to provide a local computing environment for telescience. The purpose of the program are as follows: (1) to provide a suitable environment to integrate existing and new software for a telescience workstation; (2) to provide a suitable environment to develop new software in support of telescience activities; (3) to provide an interoperable environment so that a wide variety of workstations may be used in the telescience program; (4) to provide a supportive infrastructure and a common software base; and (5) to advance, apply, and evaluate the telescience technolgy base. A prototype telescience computing environment designed to bring practicing scientists in domains other than their computer science into a modern style of doing their computing was created and deployed. This environment, the Telescience Windowing Environment, Phase 1 (TeleWEn-1), met some, but not all of the goals stated above. The TeleWEn-1 provided a window-based workstation environment and a set of tools for text editing, document preparation, electronic mail, multimedia mail, raster manipulation, and system management.

A multi-GPU real-time dose simulation software framework for lung radiotherapy.

PubMed

Santhanam, A P; Min, Y; Neelakkantan, H; Papp, N; Meeks, S L; Kupelian, P A

2012-09-01

Medical simulation frameworks facilitate both the preoperative and postoperative analysis of the patient's pathophysical condition. Of particular importance is the simulation of radiation dose delivery for real-time radiotherapy monitoring and retrospective analyses of the patient's treatment. In this paper, a software framework tailored for the development of simulation-based real-time radiation dose monitoring medical applications is discussed. A multi-GPU-based computational framework coupled with inter-process communication methods is introduced for simulating the radiation dose delivery on a deformable 3D volumetric lung model and its real-time visualization. The model deformation and the corresponding dose calculation are allocated among the GPUs in a task-specific manner and is performed in a pipelined manner. Radiation dose calculations are computed on two different GPU hardware architectures. The integration of this computational framework with a front-end software layer and back-end patient database repository is also discussed. Real-time simulation of the dose delivered is achieved at once every 120 ms using the proposed framework. With a linear increase in the number of GPU cores, the computational time of the simulation was linearly decreased. The inter-process communication time also improved with an increase in the hardware memory. Variations in the delivered dose and computational speedup for variations in the data dimensions are investigated using D70 and D90 as well as gEUD as metrics for a set of 14 patients. Computational speed-up increased with an increase in the beam dimensions when compared with a CPU-based commercial software while the error in the dose calculation was <1%. Our analyses show that the framework applied to deformable lung model-based radiotherapy is an effective tool for performing both real-time and retrospective analyses.

Database Administration: Concepts, Tools, Experiences, and Problems.

ERIC Educational Resources Information Center

Leong-Hong, Belkis; Marron, Beatrice

The concepts of data base administration, the role of the data base administrator (DBA), and computer software tools useful in data base administration are described in order to assist data base technologists and managers. A study of DBA's in the Federal Government is detailed in terms of the functions they perform, the software tools they use,…

Calculus domains modelled using an original bool algebra based on polygons

NASA Astrophysics Data System (ADS)

Oanta, E.; Panait, C.; Raicu, A.; Barhalescu, M.; Axinte, T.

2016-08-01

Analytical and numerical computer based models require analytical definitions of the calculus domains. The paper presents a method to model a calculus domain based on a bool algebra which uses solid and hollow polygons. The general calculus relations of the geometrical characteristics that are widely used in mechanical engineering are tested using several shapes of the calculus domain in order to draw conclusions regarding the most effective methods to discretize the domain. The paper also tests the results of several CAD commercial software applications which are able to compute the geometrical characteristics, being drawn interesting conclusions. The tests were also targeting the accuracy of the results vs. the number of nodes on the curved boundary of the cross section. The study required the development of an original software consisting of more than 1700 computer code lines. In comparison with other calculus methods, the discretization using convex polygons is a simpler approach. Moreover, this method doesn't lead to large numbers as the spline approximation did, in that case being required special software packages in order to offer multiple, arbitrary precision. The knowledge resulted from this study may be used to develop complex computer based models in engineering.

Development of an irrigation scheduling software based on model predicted crop water stress

USDA-ARS?s Scientific Manuscript database

Modern irrigation scheduling methods are generally based on sensor-monitored soil moisture regimes rather than crop water stress which is difficult to measure in real-time, but can be computed using agricultural system models. In this study, an irrigation scheduling software based on RZWQM2 model pr...

The Ruggedized STD Bus Microcomputer - A low cost computer suitable for Space Shuttle experiments

NASA Technical Reports Server (NTRS)

Budney, T. J.; Stone, R. W.

1982-01-01

Previous space flight computers have been costly in terms of both hardware and software. The Ruggedized STD Bus Microcomputer is based on the commercial Mostek/Pro-Log STD Bus. Ruggedized PC cards can be based on commercial cards from more than 60 manufacturers, reducing hardware cost and design time. Software costs are minimized by using standard 8-bit microprocessors and by debugging code using commercial versions of the ruggedized flight boards while the flight hardware is being fabricated.

A survey of the computer literacy of undergraduate dental students at a University Dental School in Ireland during the academic year 1997-98.

PubMed

Ray, N J; Hannigan, A

1999-05-01

As dental practice management becomes more computer-based, the efficient functioning of the dentist will become dependent on adequate computer literacy. A survey has been carried out into the computer literacy of a cohort of 140 undergraduate dental students at a University Dental School in Ireland (years 1-5), in the academic year 1997-98. Aspects investigated by anonymous questionnaire were: (1) keyboard skills; (2) computer skills; (3) access to computer facilities; (4) software competencies and (5) use of medical library computer facilities. The students are relatively unfamiliar with basic computer hardware and software: 51.1% considered their expertise with computers as "poor"; 34.3% had taken a formal typewriting or computer keyboarding course; 7.9% had taken a formal computer course at university level and 67.2% were without access to computer facilities at their term-time residences. A majority of students had never used either word-processing, spreadsheet, or graphics programs. Programs relating to "informatics" were more popular, such as literature searching, accessing the Internet and the use of e-mail which represent the major use of the computers in the medical library. The lack of experience with computers may be addressed by including suitable computing courses at the secondary level (age 13-18 years) and/or tertiary level (FE/HE) education programmes. Such training may promote greater use of generic softwares, particularly in the library, with a more electronic-based approach to data handling.

Center for Center for Technology for Advanced Scientific Component Software (TASCS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kostadin, Damevski

A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technologymore » for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.« less

Setting up a Low-Cost Lab Management System for a Multi-Purpose Computing Laboratory Using Virtualisation Technology

ERIC Educational Resources Information Center

Mok, Heng Ngee; Lee, Yeow Leong; Tan, Wee Kiat

2012-01-01

This paper describes how a generic computer laboratory equipped with 52 workstations is set up for teaching IT-related courses and other general purpose usage. The authors have successfully constructed a lab management system based on decentralised, client-side software virtualisation technology using Linux and free software tools from VMware that…

catcher: A Software Program to Detect Answer Copying in Multiple-Choice Tests Based on Nominal Response Model

ERIC Educational Resources Information Center

Kalender, Ilker

2012-01-01

catcher is a software program designed to compute the [omega] index, a common statistical index for the identification of collusions (cheating) among examinees taking an educational or psychological test. It requires (a) responses and (b) ability estimations of individuals, and (c) item parameters to make computations and outputs the results of…

Video Altimeter and Obstruction Detector for an Aircraft

NASA Technical Reports Server (NTRS)

Delgado, Frank J.; Abernathy, Michael F.; White, Janis; Dolson, William R.

2013-01-01

Video-based altimetric and obstruction detection systems for aircraft have been partially developed. The hardware of a system of this type includes a downward-looking video camera, a video digitizer, a Global Positioning System receiver or other means of measuring the aircraft velocity relative to the ground, a gyroscope based or other attitude-determination subsystem, and a computer running altimetric and/or obstruction-detection software. From the digitized video data, the altimetric software computes the pixel velocity in an appropriate part of the video image and the corresponding angular relative motion of the ground within the field of view of the camera. Then by use of trigonometric relationships among the aircraft velocity, the attitude of the camera, the angular relative motion, and the altitude, the software computes the altitude. The obstruction-detection software performs somewhat similar calculations as part of a larger task in which it uses the pixel velocity data from the entire video image to compute a depth map, which can be correlated with a terrain map, showing locations of potential obstructions. The depth map can be used as real-time hazard display and/or to update an obstruction database.

Designing Asynchronous, Text-Based Computer Conferences: Ten Research-Based Suggestions

ERIC Educational Resources Information Center

Choitz, Paul; Lee, Doris

2006-01-01

Asynchronous computer conferencing refers to the use of computer software and a network enabling participants to post messages that allow discourse to continue even though interactions may be extended over days and weeks. Asynchronous conferences are time-independent, adapting to multiple time zones and learner schedules. Such activities as…

State of the Art of Network Security Perspectives in Cloud Computing

NASA Astrophysics Data System (ADS)

Oh, Tae Hwan; Lim, Shinyoung; Choi, Young B.; Park, Kwang-Roh; Lee, Heejo; Choi, Hyunsang

Cloud computing is now regarded as one of social phenomenon that satisfy customers' needs. It is possible that the customers' needs and the primary principle of economy - gain maximum benefits from minimum investment - reflects realization of cloud computing. We are living in the connected society with flood of information and without connected computers to the Internet, our activities and work of daily living will be impossible. Cloud computing is able to provide customers with custom-tailored features of application software and user's environment based on the customer's needs by adopting on-demand outsourcing of computing resources through the Internet. It also provides cloud computing users with high-end computing power and expensive application software package, and accordingly the users will access their data and the application software where they are located at the remote system. As the cloud computing system is connected to the Internet, network security issues of cloud computing are considered as mandatory prior to real world service. In this paper, survey and issues on the network security in cloud computing are discussed from the perspective of real world service environments.

Computerized Bone Age Estimation Using Deep Learning Based Program: Evaluation of the Accuracy and Efficiency.

PubMed

Kim, Jeong Rye; Shim, Woo Hyun; Yoon, Hee Mang; Hong, Sang Hyup; Lee, Jin Seong; Cho, Young Ah; Kim, Sangki

2017-12-01

The purpose of this study is to evaluate the accuracy and efficiency of a new automatic software system for bone age assessment and to validate its feasibility in clinical practice. A Greulich-Pyle method-based deep-learning technique was used to develop the automatic software system for bone age determination. Using this software, bone age was estimated from left-hand radiographs of 200 patients (3-17 years old) using first-rank bone age (software only), computer-assisted bone age (two radiologists with software assistance), and Greulich-Pyle atlas-assisted bone age (two radiologists with Greulich-Pyle atlas assistance only). The reference bone age was determined by the consensus of two experienced radiologists. First-rank bone ages determined by the automatic software system showed a 69.5% concordance rate and significant correlations with the reference bone age (r = 0.992; p < 0.001). Concordance rates increased with the use of the automatic software system for both reviewer 1 (63.0% for Greulich-Pyle atlas-assisted bone age vs 72.5% for computer-assisted bone age) and reviewer 2 (49.5% for Greulich-Pyle atlas-assisted bone age vs 57.5% for computer-assisted bone age). Reading times were reduced by 18.0% and 40.0% for reviewers 1 and 2, respectively. Automatic software system showed reliably accurate bone age estimations and appeared to enhance efficiency by reducing reading times without compromising the diagnostic accuracy.

Software Framework for Development of Web-GIS Systems for Analysis of Georeferenced Geophysical Data

NASA Astrophysics Data System (ADS)

Okladnikov, I.; Gordov, E. P.; Titov, A. G.

2011-12-01

Georeferenced datasets (meteorological databases, modeling and reanalysis results, remote sensing products, etc.) are currently actively used in numerous applications including modeling, interpretation and forecast of climatic and ecosystem changes for various spatial and temporal scales. Due to inherent heterogeneity of environmental datasets as well as their size which might constitute up to tens terabytes for a single dataset at present studies in the area of climate and environmental change require a special software support. A dedicated software framework for rapid development of providing such support information-computational systems based on Web-GIS technologies has been created. The software framework consists of 3 basic parts: computational kernel developed using ITTVIS Interactive Data Language (IDL), a set of PHP-controllers run within specialized web portal, and JavaScript class library for development of typical components of web mapping application graphical user interface (GUI) based on AJAX technology. Computational kernel comprise of number of modules for datasets access, mathematical and statistical data analysis and visualization of results. Specialized web-portal consists of web-server Apache, complying OGC standards Geoserver software which is used as a base for presenting cartographical information over the Web, and a set of PHP-controllers implementing web-mapping application logic and governing computational kernel. JavaScript library aiming at graphical user interface development is based on GeoExt library combining ExtJS Framework and OpenLayers software. Based on the software framework an information-computational system for complex analysis of large georeferenced data archives was developed. Structured environmental datasets available for processing now include two editions of NCEP/NCAR Reanalysis, JMA/CRIEPI JRA-25 Reanalysis, ECMWF ERA-40 Reanalysis, ECMWF ERA Interim Reanalysis, MRI/JMA APHRODITE's Water Resources Project Reanalysis, meteorological observational data for the territory of the former USSR for the 20th century, and others. Current version of the system is already involved into a scientific research process. Particularly, recently the system was successfully used for analysis of Siberia climate changes and its impact in the region. The software framework presented allows rapid development of Web-GIS systems for geophysical data analysis thus providing specialists involved into multidisciplinary research projects with reliable and practical instruments for complex analysis of climate and ecosystems changes on global and regional scales. This work is partially supported by RFBR grants #10-07-00547, #11-05-01190, and SB RAS projects 4.31.1.5, 4.31.2.7, 4, 8, 9, 50 and 66.

Semantic Metrics for Analysis of Software

NASA Technical Reports Server (NTRS)

Etzkorn, Letha H.; Cox, Glenn W.; Farrington, Phil; Utley, Dawn R.; Ghalston, Sampson; Stein, Cara

2005-01-01

A recently conceived suite of object-oriented software metrics focus is on semantic aspects of software, in contradistinction to traditional software metrics, which focus on syntactic aspects of software. Semantic metrics represent a more human-oriented view of software than do syntactic metrics. The semantic metrics of a given computer program are calculated by use of the output of a knowledge-based analysis of the program, and are substantially more representative of software quality and more readily comprehensible from a human perspective than are the syntactic metrics.

Data Collection with Linux in the Undergraduate Physics Lab

NASA Astrophysics Data System (ADS)

Ramey, R. Dwayne

2004-11-01

Electronic data devices such as photogates can greatly facilitate data collection in the undergraduate physics laboratory. Unfortunately, these devices have several practical drawbacks. While the photogates themselves are not particularly expensive, manufacturers of these devices have created intermediary hardware devices for data buffering and manipulation. These devices, while useful in some contexts, greatly increase the overall price of data collection and, through the use of proprietary software, limit the ability of the enduser to customize the software. As an alternative, I outline the procedure for establishing a computer-based data collection system that consists of opensource software and user constructed connections. The data collection system consists of the wiring needed to connect a data device to a computer and the software needed to collect and manipulate data. Data devices can be connected to a computer through either through the USB port or the gameport of a sound card. Software capable of collecting and manipulating the data from a photogate type device on a Linux system has been developed and will be discrussed. Results for typical undergraduate photogate based experiments will be shown, error limits and data collect rates will be discussed for both the gameport and USB connections.

Wildlife software: procedures for publication of computer software

USGS Publications Warehouse

Samuel, M.D.

1990-01-01

Computers and computer software have become an integral part of the practice of wildlife science. Computers now play an important role in teaching, research, and management applications. Because of the specialized nature of wildlife problems, specific computer software is usually required to address a given problem (e.g., home range analysis). This type of software is not usually available from commercial vendors and therefore must be developed by those wildlife professionals with particular skill in computer programming. Current journal publication practices generally prevent a detailed description of computer software associated with new techniques. In addition, peer review of journal articles does not usually include a review of associated computer software. Thus, many wildlife professionals are usually unaware of computer software that would meet their needs or of major improvements in software they commonly use. Indeed most users of wildlife software learn of new programs or important changes only by word of mouth.

Service-oriented Software Defined Optical Networks for Cloud Computing

NASA Astrophysics Data System (ADS)

Liu, Yuze; Li, Hui; Ji, Yuefeng

2017-10-01

With the development of big data and cloud computing technology, the traditional software-defined network is facing new challenges (e.g., ubiquitous accessibility, higher bandwidth, more flexible management and greater security). This paper proposes a new service-oriented software defined optical network architecture, including a resource layer, a service abstract layer, a control layer and an application layer. We then dwell on the corresponding service providing method. Different service ID is used to identify the service a device can offer. Finally, we experimentally evaluate that proposed service providing method can be applied to transmit different services based on the service ID in the service-oriented software defined optical network.

Software Engineering Principles for Courseware Development.

ERIC Educational Resources Information Center

Magel, Kenneth

1980-01-01

Courseware (computer based curriculum materials) development should follow the lessons learned by software engineers. The most important of 28 principles of software development presented here include a stress on human readability, the importance of early planning and analysis, the need for independent evaluation, and the need to be flexible.…

Guidance on Software Maintenance. Final Report. Reports on Computer Science and Technology.

ERIC Educational Resources Information Center

Martin, Roger J.; Osborne, Wilma M.

Based on informal discussions with personnel at selected federal agencies and private sector organizations and on additional research, this publication addresses issues and problems of software maintenance and suggests actions and procedures which can help software maintenance organizations meet the growing demands of maintaining existing systems.…

"Carbopolis": A Java Technology-Based Free Software for Environmental Education

ERIC Educational Resources Information Center

Eichler, Marcelo Leandro; Xavier, Paulo Rafael; Araujo, Roberto Costa; Forte, Rafael Castro; Del Pino, Jose Claudio

2005-01-01

The goals of this paper are to describe some characteristics of the pedagogical project of the "Carbopolis" software and some programming solutions that were found during the computational implementation of this software. Relative to the first goal, some pedagogical features that are considered necessary to developing computerized learning…

Production Techniques for Computer-Based Learning Material.

ERIC Educational Resources Information Center

Moonen, Jef; Schoenmaker, Jan

Experiences in the development of educational software in the Netherlands have included the use of individual and team approaches, the determination of software content and how it should be presented, and the organization of the entire development process, from experimental programs to prototype to final product. Because educational software is a…

Guide to Software Conversion Management. [Final Report.

ERIC Educational Resources Information Center

Skall, M., Ed.

Based mainly on interviews conducted at 14 federal agencies that had completed or were involved in software conversion projects, this publication provides guidelines for the entire process of software conversion. This is defined as the transformation, without functional change, of computer programs or data elements to permit their use on a…

Assistive Software Tools for Secondary-Level Students with Literacy Difficulties

ERIC Educational Resources Information Center

Lange, Alissa A.; McPhillips, Martin; Mulhern, Gerry; Wylie, Judith

2006-01-01

The present study assessed the compensatory effectiveness of four assistive software tools (speech synthesis, spellchecker, homophone tool, and dictionary) on literacy. Secondary-level students (N = 93) with reading difficulties completed computer-based tests of literacy skills. Training on their respective software followed for those assigned to…

Dental application of novel finite element analysis software for three-dimensional finite element modeling of a dentulous mandible from its computed tomography images.

PubMed

Nakamura, Keiko; Tajima, Kiyoshi; Chen, Ker-Kong; Nagamatsu, Yuki; Kakigawa, Hiroshi; Masumi, Shin-ich

2013-12-01

This study focused on the application of novel finite-element analysis software for constructing a finite-element model from the computed tomography data of a human dentulous mandible. The finite-element model is necessary for evaluating the mechanical response of the alveolar part of the mandible, resulting from occlusal force applied to the teeth during biting. Commercially available patient-specific general computed tomography-based finite-element analysis software was solely applied to the finite-element analysis for the extraction of computed tomography data. The mandibular bone with teeth was extracted from the original images. Both the enamel and the dentin were extracted after image processing, and the periodontal ligament was created from the segmented dentin. The constructed finite-element model was reasonably accurate using a total of 234,644 nodes and 1,268,784 tetrahedral and 40,665 shell elements. The elastic moduli of the heterogeneous mandibular bone were determined from the bone density data of the computed tomography images. The results suggested that the software applied in this study is both useful and powerful for creating a more accurate three-dimensional finite-element model of a dentulous mandible from the computed tomography data without the need for any other software.

The MUSOS (MUsic SOftware System) Toolkit: A computer-based, open source application for testing memory for melodies.

PubMed

Rainsford, M; Palmer, M A; Paine, G

2018-04-01

Despite numerous innovative studies, rates of replication in the field of music psychology are extremely low (Frieler et al., 2013). Two key methodological challenges affecting researchers wishing to administer and reproduce studies in music cognition are the difficulty of measuring musical responses, particularly when conducting free-recall studies, and access to a reliable set of novel stimuli unrestricted by copyright or licensing issues. In this article, we propose a solution for these challenges in computer-based administration. We present a computer-based application for testing memory for melodies. Created using the software Max/MSP (Cycling '74, 2014a), the MUSOS (Music Software System) Toolkit uses a simple modular framework configurable for testing common paradigms such as recall, old-new recognition, and stem completion. The program is accompanied by a stimulus set of 156 novel, copyright-free melodies, in audio and Max/MSP file formats. Two pilot tests were conducted to establish the properties of the accompanying stimulus set that are relevant to music cognition and general memory research. By using this software, a researcher without specialist musical training may administer and accurately measure responses from common paradigms used in the study of memory for music.

NanoDesign: Concepts and Software for a Nanotechnology Based on Functionalized Fullerenes

NASA Technical Reports Server (NTRS)

Globus, Al; Jaffe, Richard; Chancellor, Marisa K. (Technical Monitor)

1996-01-01

Eric Drexler has proposed a hypothetical nanotechnology based on diamond and investigated the properties of such molecular systems. While attractive, diamonoid nanotechnology is not physically accessible with straightforward extensions of current laboratory techniques. We propose a nanotechnology based on functionalized fullerenes and investigate carbon nanotube based gears with teeth added via a benzyne reaction known to occur with C60. The gears are single-walled carbon nanotubes with appended coenzyme groups for teeth. Fullerenes are in widespread laboratory use and can be functionalized in many ways. Companion papers computationally demonstrate the properties of these gears (they appear to work) and the accessibility of the benzyne/nanotube reaction. This paper describes the molecular design techniques and rationale as well as the software that implements these design techniques. The software is a set of persistent C++ objects controlled by TCL command scripts. The c++/tcl interface is automatically generated by a software system called tcl_c++ developed by the author and described here. The objects keep track of different portions of the molecular machinery to allow different simulation techniques and boundary conditions to be applied as appropriate. This capability has been required to demonstrate (computationally) our gear's feasibility. A new distributed software architecture featuring a WWW universal client, CORBA distributed objects, and agent software is under consideration. The software architecture is intended to eventually enable a widely disbursed group to develop complex simulated molecular machines.

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2013 CFR

2013-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2010 CFR

2010-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2014 CFR

2014-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2012 CFR

2012-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

Automatic documentation system extension to multi-manufacturers' computers and to measure, improve, and predict software reliability

NASA Technical Reports Server (NTRS)

Simmons, D. B.

1975-01-01

The DOMONIC system has been modified to run on the Univac 1108 and the CDC 6600 as well as the IBM 370 computer system. The DOMONIC monitor system has been implemented to gather data which can be used to optimize the DOMONIC system and to predict the reliability of software developed using DOMONIC. The areas of quality metrics, error characterization, program complexity, program testing, validation and verification are analyzed. A software reliability model for estimating program completion levels and one on which to base system acceptance have been developed. The DAVE system which performs flow analysis and error detection has been converted from the University of Colorado CDC 6400/6600 computer to the IBM 360/370 computer system for use with the DOMONIC system.

Choosing and Using Text-to-Speech Software

ERIC Educational Resources Information Center

Peters, Tom; Bell, Lori

2007-01-01

This article describes a computer-based technology for generating speech called text-to-speech (TTS). This software is ready for widespread use by libraries, other organizations, and individual users. It offers the affordable ability to turn just about any electronic text that is not image-based into an artificially spoken communication. The…

Real-Time Monitoring of Scada Based Control System for Filling Process

NASA Astrophysics Data System (ADS)

Soe, Aung Kyaw; Myint, Aung Naing; Latt, Maung Maung; Theingi

2008-10-01

This paper is a design of real-time monitoring for filling system using Supervisory Control and Data Acquisition (SCADA). The monitoring of production process is described in real-time using Visual Basic.Net programming under Visual Studio 2005 software without SCADA software. The software integrators are programmed to get the required information for the configuration screens. Simulation of components is expressed on the computer screen using parallel port between computers and filling devices. The programs of real-time simulation for the filling process from the pure drinking water industry are provided.

A Model-based Framework for Risk Assessment in Human-Computer Controlled Systems

NASA Technical Reports Server (NTRS)

Hatanaka, Iwao

2000-01-01

The rapid growth of computer technology and innovation has played a significant role in the rise of computer automation of human tasks in modem production systems across all industries. Although the rationale for automation has been to eliminate "human error" or to relieve humans from manual repetitive tasks, various computer-related hazards and accidents have emerged as a direct result of increased system complexity attributed to computer automation. The risk assessment techniques utilized for electromechanical systems are not suitable for today's software-intensive systems or complex human-computer controlled systems. This thesis will propose a new systemic model-based framework for analyzing risk in safety-critical systems where both computers and humans are controlling safety-critical functions. A new systems accident model will be developed based upon modem systems theory and human cognitive processes to better characterize system accidents, the role of human operators, and the influence of software in its direct control of significant system functions. Better risk assessments will then be achievable through the application of this new framework to complex human-computer controlled systems.

Distributed Computing Framework for Synthetic Radar Application

NASA Technical Reports Server (NTRS)

Gurrola, Eric M.; Rosen, Paul A.; Aivazis, Michael

2006-01-01

We are developing an extensible software framework, in response to Air Force and NASA needs for distributed computing facilities for a variety of radar applications. The objective of this work is to develop a Python based software framework, that is the framework elements of the middleware that allows developers to control processing flow on a grid in a distributed computing environment. Framework architectures to date allow developers to connect processing functions together as interchangeable objects, thereby allowing a data flow graph to be devised for a specific problem to be solved. The Pyre framework, developed at the California Institute of Technology (Caltech), and now being used as the basis for next-generation radar processing at JPL, is a Python-based software framework. We have extended the Pyre framework to include new facilities to deploy processing components as services, including components that monitor and assess the state of the distributed network for eventual real-time control of grid resources.

Secure Encapsulation and Publication of Biological Services in the Cloud Computing Environment

PubMed Central

Zhang, Weizhe; Wang, Xuehui; Lu, Bo; Kim, Tai-hoon

2013-01-01

Secure encapsulation and publication for bioinformatics software products based on web service are presented, and the basic function of biological information is realized in the cloud computing environment. In the encapsulation phase, the workflow and function of bioinformatics software are conducted, the encapsulation interfaces are designed, and the runtime interaction between users and computers is simulated. In the publication phase, the execution and management mechanisms and principles of the GRAM components are analyzed. The functions such as remote user job submission and job status query are implemented by using the GRAM components. The services of bioinformatics software are published to remote users. Finally the basic prototype system of the biological cloud is achieved. PMID:24078906

Secure encapsulation and publication of biological services in the cloud computing environment.

PubMed

Zhang, Weizhe; Wang, Xuehui; Lu, Bo; Kim, Tai-hoon

2013-01-01

Secure encapsulation and publication for bioinformatics software products based on web service are presented, and the basic function of biological information is realized in the cloud computing environment. In the encapsulation phase, the workflow and function of bioinformatics software are conducted, the encapsulation interfaces are designed, and the runtime interaction between users and computers is simulated. In the publication phase, the execution and management mechanisms and principles of the GRAM components are analyzed. The functions such as remote user job submission and job status query are implemented by using the GRAM components. The services of bioinformatics software are published to remote users. Finally the basic prototype system of the biological cloud is achieved.

Use of symbolic computation in robotics education

NASA Technical Reports Server (NTRS)

Vira, Naren; Tunstel, Edward

1992-01-01

An application of symbolic computation in robotics education is described. A software package is presented which combines generality, user interaction, and user-friendliness with the systematic usage of symbolic computation and artificial intelligence techniques. The software utilizes MACSYMA, a LISP-based symbolic algebra language, to automatically generate closed-form expressions representing forward and inverse kinematics solutions, the Jacobian transformation matrices, robot pose error-compensation models equations, and Lagrange dynamics formulation for N degree-of-freedom, open chain robotic manipulators. The goal of such a package is to aid faculty and students in the robotics course by removing burdensome tasks of mathematical manipulations. The software package has been successfully tested for its accuracy using commercially available robots.

QuBiLS-MAS, open source multi-platform software for atom- and bond-based topological (2D) and chiral (2.5D) algebraic molecular descriptors computations.

PubMed

Valdés-Martiní, José R; Marrero-Ponce, Yovani; García-Jacas, César R; Martinez-Mayorga, Karina; Barigye, Stephen J; Vaz d'Almeida, Yasser Silveira; Pham-The, Hai; Pérez-Giménez, Facundo; Morell, Carlos A

2017-06-07

In previous reports, Marrero-Ponce et al. proposed algebraic formalisms for characterizing topological (2D) and chiral (2.5D) molecular features through atom- and bond-based ToMoCoMD-CARDD (acronym for Topological Molecular Computational Design-Computer Aided Rational Drug Design) molecular descriptors. These MDs codify molecular information based on the bilinear, quadratic and linear algebraic forms and the graph-theoretical electronic-density and edge-adjacency matrices in order to consider atom- and bond-based relations, respectively. These MDs have been successfully applied in the screening of chemical compounds of different therapeutic applications ranging from antimalarials, antibacterials, tyrosinase inhibitors and so on. To compute these MDs, a computational program with the same name was initially developed. However, this in house software barely offered the functionalities required in contemporary molecular modeling tasks, in addition to the inherent limitations that made its usability impractical. Therefore, the present manuscript introduces the QuBiLS-MAS (acronym for Quadratic, Bilinear and N-Linear mapS based on graph-theoretic electronic-density Matrices and Atomic weightingS) software designed to compute topological (0-2.5D) molecular descriptors based on bilinear, quadratic and linear algebraic forms for atom- and bond-based relations. The QuBiLS-MAS module was designed as standalone software, in which extensions and generalizations of the former ToMoCoMD-CARDD 2D-algebraic indices are implemented, considering the following aspects: (a) two new matrix normalization approaches based on double-stochastic and mutual probability formalisms; (b) topological constraints (cut-offs) to take into account particular inter-atomic relations; (c) six additional atomic properties to be used as weighting schemes in the calculation of the molecular vectors; (d) four new local-fragments to consider molecular regions of interest; (e) number of lone-pair electrons in chemical structure defined by diagonal coefficients in matrix representations; and (f) several aggregation operators (invariants) applied over atom/bond-level descriptors in order to compute global indices. This software permits the parallel computation of the indices, contains a batch processing module and data curation functionalities. This program was developed in Java v1.7 using the Chemistry Development Kit library (version 1.4.19). The QuBiLS-MAS software consists of two components: a desktop interface (GUI) and an API library allowing for the easy integration of the latter in chemoinformatics applications. The relevance of the novel extensions and generalizations implemented in this software is demonstrated through three studies. Firstly, a comparative Shannon's entropy based variability study for the proposed QuBiLS-MAS and the DRAGON indices demonstrates superior performance for the former. A principal component analysis reveals that the QuBiLS-MAS approach captures chemical information orthogonal to that codified by the DRAGON descriptors. Lastly, a QSAR study for the binding affinity to the corticosteroid-binding globulin using Cramer's steroid dataset is carried out. From these analyses, it is revealed that the QuBiLS-MAS approach for atom-pair relations yields similar-to-superior performance with regard to other QSAR methodologies reported in the literature. Therefore, the QuBiLS-MAS approach constitutes a useful tool for the diversity analysis of chemical compound datasets and high-throughput screening of structure-activity data.

Image Understanding Architecture

DTIC Science & Technology

1991-09-01

architecture to support real-time, knowledge -based image understanding , and develop the software support environment that will be needed to utilize...NUMBER OF PAGES Image Understanding Architecture, Knowledge -Based Vision, AI Real-Time Computer Vision, Software Simulator, Parallel Processor IL PRICE... information . In addition to sensory and knowledge -based processing it is useful to introduce a level of symbolic processing. Thus, vision researchers

Evaluating computer capabilities in a primary care practice-based research network.

PubMed

Ariza, Adolfo J; Binns, Helen J; Christoffel, Katherine Kaufer

2004-01-01

We wanted to assess computer capabilities in a primary care practice-based research network and to understand how receptive the practices were to new ideas for automation of practice activities and research. This study was conducted among members of the Pediatric Practice Research Group (PPRG). A survey to assess computer capabilities was developed to explore hardware types, software programs, Internet connectivity and data transmission; views on privacy and security; and receptivity to future electronic data collection approaches. Of the 40 PPRG practices participating in the study during the autumn of 2001, all used IBM-compatible systems. Of these, 45% used stand-alone desktops, 40% had networked desktops, and approximately 15% used laptops and minicomputers. A variety of software packages were used, with most practices (82%) having software for some aspect of patient care documentation, patient accounting (90%), business support (60%), and management reports and analysis (97%). The main obstacles to expanding use of computers in patient care were insufficient staff training (63%) and privacy concerns (82%). If provided with training and support, most practices indicated they were willing to consider an array of electronic data collection options for practice-based research activities. There is wide variability in hardware and software use in the pediatric practice setting. Implementing electronic data collection in the PPRG would require a substantial start-up effort and ongoing training and support at the practice site.

Software beamforming: comparison between a phased array and synthetic transmit aperture.

PubMed

Li, Yen-Feng; Li, Pai-Chi

2011-04-01

The data-transfer and computation requirements are compared between software-based beamforming using a phased array (PA) and a synthetic transmit aperture (STA). The advantages of a software-based architecture are reduced system complexity and lower hardware cost. Although this architecture can be implemented using commercial CPUs or GPUs, the high computation and data-transfer requirements limit its real-time beamforming performance. In particular, transferring the raw rf data from the front-end subsystem to the software back-end remains challenging with current state-of-the-art electronics technologies, which offset the cost advantage of the software back end. This study investigated the tradeoff between the data-transfer and computation requirements. Two beamforming methods based on a PA and STA, respectively, were used: the former requires a higher data transfer rate and the latter requires more memory operations. The beamformers were implemente;d in an NVIDIA GeForce GTX 260 GPU and an Intel core i7 920 CPU. The frame rate of PA beamforming was 42 fps with a 128-element array transducer, with 2048 samples per firing and 189 beams per image (with a 95 MB/frame data-transfer requirement). The frame rate of STA beamforming was 40 fps with 16 firings per image (with an 8 MB/frame data-transfer requirement). Both approaches achieved real-time beamforming performance but each had its own bottleneck. On the one hand, the required data-transfer speed was considerably reduced in STA beamforming, whereas this required more memory operations, which limited the overall computation time. The advantages of the GPU approach over the CPU approach were clearly demonstrated.

CBT Pilot Program Instructional Guide. Basic Drafting Skills Curriculum Delivered through CAD Workstations and Artificial Intelligence Software.

ERIC Educational Resources Information Center

Smith, Richard J.; Sauer, Mardelle A.

This guide is intended to assist teachers in using computer-aided design (CAD) workstations and artificial intelligence software to teach basic drafting skills. The guide outlines a 7-unit shell program that may also be used as a generic authoring system capable of supporting computer-based training (CBT) in other subject areas. The first section…

On the recognition of complex structures: Computer software using artificial intelligence applied to pattern recognition

NASA Technical Reports Server (NTRS)

Yakimovsky, Y.

1974-01-01

An approach to simultaneous interpretation of objects in complex structures so as to maximize a combined utility function is presented. Results of the application of a computer software system to assign meaning to regions in a segmented image based on the principles described in this paper and on a special interactive sequential classification learning system, which is referenced, are demonstrated.

ROS-IGTL-Bridge: an open network interface for image-guided therapy using the ROS environment.

PubMed

Frank, Tobias; Krieger, Axel; Leonard, Simon; Patel, Niravkumar A; Tokuda, Junichi

2017-08-01

With the growing interest in advanced image-guidance for surgical robot systems, rapid integration and testing of robotic devices and medical image computing software are becoming essential in the research and development. Maximizing the use of existing engineering resources built on widely accepted platforms in different fields, such as robot operating system (ROS) in robotics and 3D Slicer in medical image computing could simplify these tasks. We propose a new open network bridge interface integrated in ROS to ensure seamless cross-platform data sharing. A ROS node named ROS-IGTL-Bridge was implemented. It establishes a TCP/IP network connection between the ROS environment and external medical image computing software using the OpenIGTLink protocol. The node exports ROS messages to the external software over the network and vice versa simultaneously, allowing seamless and transparent data sharing between the ROS-based devices and the medical image computing platforms. Performance tests demonstrated that the bridge could stream transforms, strings, points, and images at 30 fps in both directions successfully. The data transfer latency was <1.2 ms for transforms, strings and points, and 25.2 ms for color VGA images. A separate test also demonstrated that the bridge could achieve 900 fps for transforms. Additionally, the bridge was demonstrated in two representative systems: a mock image-guided surgical robot setup consisting of 3D slicer, and Lego Mindstorms with ROS as a prototyping and educational platform for IGT research; and the smart tissue autonomous robot surgical setup with 3D Slicer. The study demonstrated that the bridge enabled cross-platform data sharing between ROS and medical image computing software. This will allow rapid and seamless integration of advanced image-based planning/navigation offered by the medical image computing software such as 3D Slicer into ROS-based surgical robot systems.

From Numerical Problem Solving to Model-Based Experimentation Incorporating Computer-Based Tools of Various Scales into the ChE Curriculum

ERIC Educational Resources Information Center

Shacham, Mordechai; Cutlip, Michael B.; Brauner, Neima

2009-01-01

A continuing challenge to the undergraduate chemical engineering curriculum is the time-effective incorporation and use of computer-based tools throughout the educational program. Computing skills in academia and industry require some proficiency in programming and effective use of software packages for solving 1) single-model, single-algorithm…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busbey, A.B.

A number of methods and products, both hardware and software, to allow data exchange between Apple Macintosh computers and MS-DOS based systems. These included serial null modem connections, MS-DOS hardware and/or software emulation, MS-DOS disk-reading hardware and networking.

NLM microcomputer-based tutorials (for microcomputers). Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, M.

1990-04-01

The package consists of TOXLEARN--a microcomputer-based training package for TOXLINE (Toxicology Information Online), CHEMLEARN-a microcomputer-based training package for CHEMLINE (Chemical Information Online), MEDTUTOR--a microcomputer-based training package for MEDLINE (Medical Information Online), and ELHILL LEARN--a microcomputer-based training package for the ELHILL search and retrieval software that supports the above-mentioned databases...Software Description: The programs were developed under PILOTplus using the NLM LEARN Programmer. They run on IBM-PC, XT, AT, PS/2, and fully compatible computers. The programs require 512K RAM memory, one disk drive, and DOS 2.0 or higher. The software supports most monochrome, color graphics, enhanced color graphics, or visual graphics displays.

Data flow modeling techniques

NASA Technical Reports Server (NTRS)

Kavi, K. M.

1984-01-01

There have been a number of simulation packages developed for the purpose of designing, testing and validating computer systems, digital systems and software systems. Complex analytical tools based on Markov and semi-Markov processes have been designed to estimate the reliability and performance of simulated systems. Petri nets have received wide acceptance for modeling complex and highly parallel computers. In this research data flow models for computer systems are investigated. Data flow models can be used to simulate both software and hardware in a uniform manner. Data flow simulation techniques provide the computer systems designer with a CAD environment which enables highly parallel complex systems to be defined, evaluated at all levels and finally implemented in either hardware or software. Inherent in data flow concept is the hierarchical handling of complex systems. In this paper we will describe how data flow can be used to model computer system.

Using an architectural approach to integrate heterogeneous, distributed software components

NASA Technical Reports Server (NTRS)

Callahan, John R.; Purtilo, James M.

1995-01-01

Many computer programs cannot be easily integrated because their components are distributed and heterogeneous, i.e., they are implemented in diverse programming languages, use different data representation formats, or their runtime environments are incompatible. In many cases, programs are integrated by modifying their components or interposing mechanisms that handle communication and conversion tasks. For example, remote procedure call (RPC) helps integrate heterogeneous, distributed programs. When configuring such programs, however, mechanisms like RPC must be used explicitly by software developers in order to integrate collections of diverse components. Each collection may require a unique integration solution. This paper describes improvements to the concepts of software packaging and some of our experiences in constructing complex software systems from a wide variety of components in different execution environments. Software packaging is a process that automatically determines how to integrate a diverse collection of computer programs based on the types of components involved and the capabilities of available translators and adapters in an environment. Software packaging provides a context that relates such mechanisms to software integration processes and reduces the cost of configuring applications whose components are distributed or implemented in different programming languages. Our software packaging tool subsumes traditional integration tools like UNIX make by providing a rule-based approach to software integration that is independent of execution environments.

Implementation and Testing of VLBI Software Correlation at the USNO

NASA Technical Reports Server (NTRS)

Fey, Alan; Ojha, Roopesh; Boboltz, Dave; Geiger, Nicole; Kingham, Kerry; Hall, David; Gaume, Ralph; Johnston, Ken

2010-01-01

The Washington Correlator (WACO) at the U.S. Naval Observatory (USNO) is a dedicated VLBI processor based on dedicated hardware of ASIC design. The WACO is currently over 10 years old and is nearing the end of its expected lifetime. Plans for implementation and testing of software correlation at the USNO are currently being considered. The VLBI correlation process is, by its very nature, well suited to a parallelized computing environment. Commercial off-the-shelf computer hardware has advanced in processing power to the point where software correlation is now both economically and technologically feasible. The advantages of software correlation are manifold but include flexibility, scalability, and easy adaptability to changing environments and requirements. We discuss our experience with and plans for use of software correlation at USNO with emphasis on the use of the DiFX software correlator.

Prediction of Software Reliability using Bio Inspired Soft Computing Techniques.

PubMed

Diwaker, Chander; Tomar, Pradeep; Poonia, Ramesh C; Singh, Vijander

2018-04-10

A lot of models have been made for predicting software reliability. The reliability models are restricted to using particular types of methodologies and restricted number of parameters. There are a number of techniques and methodologies that may be used for reliability prediction. There is need to focus on parameters consideration while estimating reliability. The reliability of a system may increase or decreases depending on the selection of different parameters used. Thus there is need to identify factors that heavily affecting the reliability of the system. In present days, reusability is mostly used in the various area of research. Reusability is the basis of Component-Based System (CBS). The cost, time and human skill can be saved using Component-Based Software Engineering (CBSE) concepts. CBSE metrics may be used to assess those techniques which are more suitable for estimating system reliability. Soft computing is used for small as well as large-scale problems where it is difficult to find accurate results due to uncertainty or randomness. Several possibilities are available to apply soft computing techniques in medicine related problems. Clinical science of medicine using fuzzy-logic, neural network methodology significantly while basic science of medicine using neural-networks-genetic algorithm most frequently and preferably. There is unavoidable interest shown by medical scientists to use the various soft computing methodologies in genetics, physiology, radiology, cardiology and neurology discipline. CBSE boost users to reuse the past and existing software for making new products to provide quality with a saving of time, memory space, and money. This paper focused on assessment of commonly used soft computing technique like Genetic Algorithm (GA), Neural-Network (NN), Fuzzy Logic, Support Vector Machine (SVM), Ant Colony Optimization (ACO), Particle Swarm Optimization (PSO), and Artificial Bee Colony (ABC). This paper presents working of soft computing techniques and assessment of soft computing techniques to predict reliability. The parameter considered while estimating and prediction of reliability are also discussed. This study can be used in estimation and prediction of the reliability of various instruments used in the medical system, software engineering, computer engineering and mechanical engineering also. These concepts can be applied to both software and hardware, to predict the reliability using CBSE.

Dynamic online surveys and experiments with the free open-source software dynQuest.

PubMed

Rademacher, Jens D M; Lippke, Sonia

2007-08-01

With computers and the World Wide Web widely available, collecting data through Web browsers is an attractive method utilized by the social sciences. In this article, conducting PC- and Web-based trials with the software package dynQuest is described. The software manages dynamic questionnaire-based trials over the Internet or on single computers, possibly as randomized control trials (RCT), if two or more groups are involved. The choice of follow-up questions can depend on previous responses, as needed for matched interventions. Data are collected in a simple text-based database that can be imported easily into other programs for postprocessing and statistical analysis. The software consists of platform-independent scripts written in the programming language PERL that use the common gateway interface between Web browser and server for submission of data through HTML forms. Advantages of dynQuest are parsimony, simplicity in use and installation, transparency, and reliability. The program is available as open-source freeware from the authors.

Marketing Education Computer Curriculum. Final Report.

ERIC Educational Resources Information Center

Pittsburgh Univ., PA. School of Education.

A project developed computer software based upon Interstate Distributive Education Curriculum Consortium (IDECC) competency-based materials to produce a new curriculum management system for Pennsylvania secondary marketing education programs. During the project, an advisory committee composed of secondary marketing teachers, business people, and…

Checklists for the Evaluation of Educational Software: Critical Review and Prospects.

ERIC Educational Resources Information Center

Tergan, Sigmar-Olaf

1998-01-01

Reviews strengths and weaknesses of check lists for the evaluation of computer software and outlines consequences for their practical application. Suggests an approach based on an instructional design model and a comprehensive framework to cope with problems of validity and predictive power of software evaluation. Discusses prospects of the…

Comparison of voice-automated transcription and human transcription in generating pathology reports.

PubMed

Al-Aynati, Maamoun M; Chorneyko, Katherine A

2003-06-01

Software that can convert spoken words into written text has been available since the early 1980s. Early continuous speech systems were developed in 1994, with the latest commercially available editions having a claimed accuracy of up to 98% of speech recognition at natural speech rates. To evaluate the efficacy of one commercially available voice-recognition software system with pathology vocabulary in generating pathology reports and to compare this with human transcription. To draw cost analysis conclusions regarding human versus computer-based transcription. Two hundred six routine pathology reports from the surgical pathology material handled at St Joseph's Healthcare, Hamilton, Ontario, were generated simultaneously using computer-based transcription and human transcription. The following hardware and software were used: a desktop 450-MHz Intel Pentium III processor with 192 MB of RAM, a speech-quality sound card (Sound Blaster), noise-canceling headset microphone, and IBM ViaVoice Pro version 8 with pathology vocabulary support (Voice Automated, Huntington Beach, Calif). The cost of the hardware and software used was approximately Can 2250 dollars. A total of 23 458 words were transcribed using both methods with a mean of 114 words per report. The mean accuracy rate was 93.6% (range, 87.4%-96%) using the computer software, compared to a mean accuracy of 99.6% (range, 99.4%-99.8%) for human transcription (P <.001). Time needed to edit documents by the primary evaluator (M.A.) using the computer was on average twice that needed for editing the documents produced by human transcriptionists (range, 1.4-3.5 times). The extra time needed to edit documents was 67 minutes per week (13 minutes per day). Computer-based continuous speech-recognition systems in pathology can be successfully used in pathology practice even during the handling of gross pathology specimens. The relatively low accuracy rate of this voice-recognition software with resultant increased editing burden on pathologists may not encourage its application on a wide scale in pathology departments with sufficient human transcription services, despite significant potential financial savings. However, computer-based transcription represents an attractive and relatively inexpensive alternative to human transcription in departments where there is a shortage of transcription services, and will no doubt become more commonly used in pathology departments in the future.

The educational effectiveness of computer-based instruction

NASA Astrophysics Data System (ADS)

Renshaw, Carl E.; Taylor, Holly A.

2000-07-01

Although numerous studies have shown that computer-based education is effective for enhancing rote memorization, the impact of these tools on higher-order cognitive skills, such as critical thinking, is less clear. Existing methods for evaluating educational effectiveness, such as surveys, quizzes and pre- or post-interviews, may not be effective for evaluating impact on critical thinking skills because students are not always aware of the effects the software has on their thought processes. We review an alternative evaluation strategy whereby the student's mastery of a specific cognitive skill is directly assessed both before and after participating in a computer-based exercise. Methodologies for assessing cognitive skill are based on recent advances in the fields of cognitive science. Results from two studies show that computer-based exercises can positively impact the higher-order cognitive skills of some students. However, a given exercise will not impact all students equally. This suggests that further work is needed to understand how and why CAI software is more or less effective within a given population.

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

Networked Instructional Chemistry: Using Technology To Teach Chemistry

NASA Astrophysics Data System (ADS)

Smith, Stanley; Stovall, Iris

1996-10-01

Networked multimedia microcomputers provide new ways to help students learn chemistry and to help instructors manage the learning environment. This technology is used to replace some traditional laboratory work, collect on-line experimental data, enhance lectures and quiz sections with multimedia presentations, provide prelaboratory training for beginning nonchemistry- major organic laboratory, provide electronic homework for organic chemistry students, give graduate students access to real NMR data for analysis, and provide access to molecular modeling tools. The integration of all of these activities into an active learning environment is made possible by a client-server network of hundreds of computers. This requires not only instructional software but also classroom and course management software, computers, networking, and room management. Combining computer-based work with traditional course material is made possible with software management tools that allow the instructor to monitor the progress of each student and make available an on-line gradebook so students can see their grades and class standing. This client-server based system extends the capabilities of the earlier mainframe-based PLATO system, which was used for instructional computing. This paper outlines the components of a technology center used to support over 5,000 students per semester.

MiniWall Tool for Analyzing CFD and Wind Tunnel Large Data Sets

NASA Technical Reports Server (NTRS)

Schuh, Michael J.; Melton, John E.; Stremel, Paul M.

2017-01-01

It is challenging to review and assimilate large data sets created by Computational Fluid Dynamics (CFD) simulations and wind tunnel tests. Over the past 10 years, NASA Ames Research Center has developed and refined a software tool dubbed the MiniWall to increase productivity in reviewing and understanding large CFD-generated data sets. Under the recent NASA ERA project, the application of the tool expanded to enable rapid comparison of experimental and computational data. The MiniWall software is browser based so that it runs on any computer or device that can display a web page. It can also be used remotely and securely by using web server software such as the Apache HTTP server. The MiniWall software has recently been rewritten and enhanced to make it even easier for analysts to review large data sets and extract knowledge and understanding from these data sets. This paper describes the MiniWall software and demonstrates how the different features are used to review and assimilate large data sets.

A Novel Automated Method for Analyzing Cylindrical Computed Tomography Data

NASA Technical Reports Server (NTRS)

Roth, D. J.; Burke, E. R.; Rauser, R. W.; Martin, R. E.

2011-01-01

A novel software method is presented that is applicable for analyzing cylindrical and partially cylindrical objects inspected using computed tomography. This method involves unwrapping and re-slicing data so that the CT data from the cylindrical object can be viewed as a series of 2-D sheets in the vertical direction in addition to volume rendering and normal plane views provided by traditional CT software. The method is based on interior and exterior surface edge detection and under proper conditions, is FULLY AUTOMATED and requires no input from the user except the correct voxel dimension from the CT scan. The software is available from NASA in 32- and 64-bit versions that can be applied to gigabyte-sized data sets, processing data either in random access memory or primarily on the computer hard drive. Please inquire with the presenting author if further interested. This software differentiates itself in total from other possible re-slicing software solutions due to complete automation and advanced processing and analysis capabilities.

MiniWall Tool for Analyzing CFD and Wind Tunnel Large Data Sets

NASA Technical Reports Server (NTRS)

Schuh, Michael J.; Melton, John E.; Stremel, Paul M.

2017-01-01

It is challenging to review and assimilate large data sets created by Computational Fluid Dynamics (CFD) simulations and wind tunnel tests. Over the past 10 years, NASA Ames Research Center has developed and refined a software tool dubbed the "MiniWall" to increase productivity in reviewing and understanding large CFD-generated data sets. Under the recent NASA ERA project, the application of the tool expanded to enable rapid comparison of experimental and computational data. The MiniWall software is browser based so that it runs on any computer or device that can display a web page. It can also be used remotely and securely by using web server software such as the Apache HTTP Server. The MiniWall software has recently been rewritten and enhanced to make it even easier for analysts to review large data sets and extract knowledge and understanding from these data sets. This paper describes the MiniWall software and demonstrates how the different features are used to review and assimilate large data sets.

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7205 - Contracts for special works.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Computer Software and Computer Software Documentation 227.7205 Contracts for special works. (a) Use the... a specific need to control the distribution of computer software or computer software documentation..., modification, reproduction, release, performance, display, or disclosure of such software or documentation. Use...

48 CFR 227.7205 - Contracts for special works.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Computer Software and Computer Software Documentation 227.7205 Contracts for special works. (a) Use the... a specific need to control the distribution of computer software or computer software documentation..., modification, reproduction, release, performance, display, or disclosure of such software or documentation. Use...

A versatile software package for inter-subject correlation based analyses of fMRI.

PubMed

Kauppi, Jukka-Pekka; Pajula, Juha; Tohka, Jussi

2014-01-01

In the inter-subject correlation (ISC) based analysis of the functional magnetic resonance imaging (fMRI) data, the extent of shared processing across subjects during the experiment is determined by calculating correlation coefficients between the fMRI time series of the subjects in the corresponding brain locations. This implies that ISC can be used to analyze fMRI data without explicitly modeling the stimulus and thus ISC is a potential method to analyze fMRI data acquired under complex naturalistic stimuli. Despite of the suitability of ISC based approach to analyze complex fMRI data, no generic software tools have been made available for this purpose, limiting a widespread use of ISC based analysis techniques among neuroimaging community. In this paper, we present a graphical user interface (GUI) based software package, ISC Toolbox, implemented in Matlab for computing various ISC based analyses. Many advanced computations such as comparison of ISCs between different stimuli, time window ISC, and inter-subject phase synchronization are supported by the toolbox. The analyses are coupled with re-sampling based statistical inference. The ISC based analyses are data and computation intensive and the ISC toolbox is equipped with mechanisms to execute the parallel computations in a cluster environment automatically and with an automatic detection of the cluster environment in use. Currently, SGE-based (Oracle Grid Engine, Son of a Grid Engine, or Open Grid Scheduler) and Slurm environments are supported. In this paper, we present a detailed account on the methods behind the ISC Toolbox, the implementation of the toolbox and demonstrate the possible use of the toolbox by summarizing selected example applications. We also report the computation time experiments both using a single desktop computer and two grid environments demonstrating that parallelization effectively reduces the computing time. The ISC Toolbox is available in https://code.google.com/p/isc-toolbox/

A versatile software package for inter-subject correlation based analyses of fMRI

PubMed Central

Kauppi, Jukka-Pekka; Pajula, Juha; Tohka, Jussi

2014-01-01

In the inter-subject correlation (ISC) based analysis of the functional magnetic resonance imaging (fMRI) data, the extent of shared processing across subjects during the experiment is determined by calculating correlation coefficients between the fMRI time series of the subjects in the corresponding brain locations. This implies that ISC can be used to analyze fMRI data without explicitly modeling the stimulus and thus ISC is a potential method to analyze fMRI data acquired under complex naturalistic stimuli. Despite of the suitability of ISC based approach to analyze complex fMRI data, no generic software tools have been made available for this purpose, limiting a widespread use of ISC based analysis techniques among neuroimaging community. In this paper, we present a graphical user interface (GUI) based software package, ISC Toolbox, implemented in Matlab for computing various ISC based analyses. Many advanced computations such as comparison of ISCs between different stimuli, time window ISC, and inter-subject phase synchronization are supported by the toolbox. The analyses are coupled with re-sampling based statistical inference. The ISC based analyses are data and computation intensive and the ISC toolbox is equipped with mechanisms to execute the parallel computations in a cluster environment automatically and with an automatic detection of the cluster environment in use. Currently, SGE-based (Oracle Grid Engine, Son of a Grid Engine, or Open Grid Scheduler) and Slurm environments are supported. In this paper, we present a detailed account on the methods behind the ISC Toolbox, the implementation of the toolbox and demonstrate the possible use of the toolbox by summarizing selected example applications. We also report the computation time experiments both using a single desktop computer and two grid environments demonstrating that parallelization effectively reduces the computing time. The ISC Toolbox is available in https://code.google.com/p/isc-toolbox/ PMID:24550818

Seeing beyond Computer Science and Software Engineering

NASA Astrophysics Data System (ADS)

Nori, Kesav Vithal

The boundaries of computer science are defined by what symbolic computation can accomplish. Software Engineering is concerned with effective use of computing technology to support automatic computation on a large scale so as to construct desirable solutions to worthwhile problems. Both focus on what happens within the machine. In contrast, most practical applications of computing support end-users in realizing (often unsaid) objectives. It is often said that such objectives cannot be even specified, e.g., what is the specification of MS Word, or for that matter, any flavour of UNIX? This situation points to the need for architecting what people do with computers. Based on Systems Thinking and Cybernetics, we present such a viewpoint which hinges on Human Responsibility and means of living up to it.

Large scale systems : a study of computer organizations for air traffic control applications.

DOT National Transportation Integrated Search

1971-06-01

Based on current sizing estimates and tracking algorithms, some computer organizations applicable to future air traffic control computing systems are described and assessed. Hardware and software problem areas are defined and solutions are outlined.

Computers-in-the-Curriculum Workshop.

ERIC Educational Resources Information Center

Casella, Vicki

1987-01-01

Computer software to build skills and encourage family computer time over the summer are recommended for teachers to send home to parents. Programs include games based on classic adventure stories, a shopping mall game to encourage math skills, and keyboarding programs. (MT)

Cybersecurity, massive data processing, community interaction, and other developments at WWW-based computational X-ray Server

NASA Astrophysics Data System (ADS)

Stepanov, Sergey

2013-03-01

X-Ray Server (x-server.gmca.aps.anl.gov) is a WWW-based computational server for modeling of X-ray diffraction, reflection and scattering data. The modeling software operates directly on the server and can be accessed remotely either from web browsers or from user software. In the later case the server can be deployed as a software library or a data fitting engine. As the server recently surpassed the milestones of 15 years online and 1.5 million calculations, it accumulated a number of technical solutions that are discussed in this paper. The developed approaches to detecting physical model limits and user calculations failures, solutions to spam and firewall problems, ways to involve the community in replenishing databases and methods to teach users automated access to the server programs may be helpful for X-ray researchers interested in using the server or sharing their own software online.

Web-based software tool for constraint-based design specification of synthetic biological systems.

PubMed

Oberortner, Ernst; Densmore, Douglas

2015-06-19

miniEugene provides computational support for solving combinatorial design problems, enabling users to specify and enumerate designs for novel biological systems based on sets of biological constraints. This technical note presents a brief tutorial for biologists and software engineers in the field of synthetic biology on how to use miniEugene. After reading this technical note, users should know which biological constraints are available in miniEugene, understand the syntax and semantics of these constraints, and be able to follow a step-by-step guide to specify the design of a classical synthetic biological system-the genetic toggle switch.1 We also provide links and references to more information on the miniEugene web application and the integration of the miniEugene software library into sophisticated Computer-Aided Design (CAD) tools for synthetic biology ( www.eugenecad.org ).

Scalability and Validation of Big Data Bioinformatics Software.

PubMed

Yang, Andrian; Troup, Michael; Ho, Joshua W K

2017-01-01

This review examines two important aspects that are central to modern big data bioinformatics analysis - software scalability and validity. We argue that not only are the issues of scalability and validation common to all big data bioinformatics analyses, they can be tackled by conceptually related methodological approaches, namely divide-and-conquer (scalability) and multiple executions (validation). Scalability is defined as the ability for a program to scale based on workload. It has always been an important consideration when developing bioinformatics algorithms and programs. Nonetheless the surge of volume and variety of biological and biomedical data has posed new challenges. We discuss how modern cloud computing and big data programming frameworks such as MapReduce and Spark are being used to effectively implement divide-and-conquer in a distributed computing environment. Validation of software is another important issue in big data bioinformatics that is often ignored. Software validation is the process of determining whether the program under test fulfils the task for which it was designed. Determining the correctness of the computational output of big data bioinformatics software is especially difficult due to the large input space and complex algorithms involved. We discuss how state-of-the-art software testing techniques that are based on the idea of multiple executions, such as metamorphic testing, can be used to implement an effective bioinformatics quality assurance strategy. We hope this review will raise awareness of these critical issues in bioinformatics.

Current Practice in Software Development for Computational Neuroscience and How to Improve It

PubMed Central

Gewaltig, Marc-Oliver; Cannon, Robert

2014-01-01

Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research. PMID:24465191

Current practice in software development for computational neuroscience and how to improve it.

PubMed

Gewaltig, Marc-Oliver; Cannon, Robert

2014-01-01

Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

Computer-Assisted Instruction for Severely Handicapped Persons: A Program Based on Stimulus Control Research Modifying Current Software and Hardware. November 1, 1988-April 1, 1990. Final Report.

ERIC Educational Resources Information Center

Karsh, Kathryn G.

This final report describes activities of a federally funded project which developed an educational computer-assisted instructional program for persons with severe disabilities. A preliminary review of the literature identified specific inadequacies of most software for this population, such as: too few examples of a task or concept thus limiting…

48 CFR 52.227-14 - Rights in Data-General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software. Computer software—(1) Means (i) Computer programs that comprise a series of instructions, rules... or computer software documentation. Computer software documentation means owner's manuals, user's... medium, that explain the capabilities of the computer software or provide instructions for using the...

Advanced Software Techniques for Data Management Systems. Volume 2: Space Shuttle Flight Executive System: Functional Design

NASA Technical Reports Server (NTRS)

Pepe, J. T.

1972-01-01

A functional design of software executive system for the space shuttle avionics computer is presented. Three primary functions of the executive are emphasized in the design: task management, I/O management, and configuration management. The executive system organization is based on the applications software and configuration requirements established during the Phase B definition of the Space Shuttle program. Although the primary features of the executive system architecture were derived from Phase B requirements, it was specified for implementation with the IBM 4 Pi EP aerospace computer and is expected to be incorporated into a breadboard data management computer system at NASA Manned Spacecraft Center's Information system division. The executive system was structured for internal operation on the IBM 4 Pi EP system with its external configuration and applications software assumed to the characteristic of the centralized quad-redundant avionics systems defined in Phase B.

Non-standard analysis and embedded software

NASA Technical Reports Server (NTRS)

Platek, Richard

1995-01-01

One model for computing in the future is ubiquitous, embedded computational devices analogous to embedded electrical motors. Many of these computers will control physical objects and processes. Such hidden computerized environments introduce new safety and correctness concerns whose treatment go beyond present Formal Methods. In particular, one has to begin to speak about Real Space software in analogy with Real Time software. By this we mean, computerized systems which have to meet requirements expressed in the real geometry of space. How to translate such requirements into ordinary software specifications and how to carry out proofs is a major challenge. In this talk we propose a research program based on the use of no-standard analysis. Much detail remains to be carried out. The purpose of the talk is to inform the Formal Methods community that Non-Standard Analysis provides a possible avenue to attack which we believe will be fruitful.

Design Considerations of Help Options in Computer-Based L2 Listening Materials Informed by Participatory Design

ERIC Educational Resources Information Center

Cárdenas-Claros, Mónica Stella

2015-01-01

This paper reports on the findings of two qualitative exploratory studies that sought to investigate design features of help options in computer-based L2 listening materials. Informed by principles of participatory design, language learners, software designers, language teachers, and a computer programmer worked collaboratively in a series of…

The Effect of Teacher Involvement on Student Performance in a Computer-Based Science Simulation.

ERIC Educational Resources Information Center

Waugh, Michael L.

Designed to investigate whether or not science teachers can positively influence student achievement in, and attitude toward, science, this study focused on a specific teaching strategy and utilization of a computer-based simulation. The software package used in the study was the simulation, Volcanoes, by Earthware Computer Services. The sample…

Exploring the Perceptions of College Instructors towards Computer Simulation Software Programs: A Quantitative Study

ERIC Educational Resources Information Center

Punch, Raymond J.

2012-01-01

The purpose of the quantitative regression study was to explore and to identify relationships between attitudes toward use and perceptions of value of computer-based simulation programs, of college instructors, toward computer based simulation programs. A relationship has been reported between attitudes toward use and perceptions of the value of…

A demonstrative model of a lunar base simulation on a personal computer

NASA Technical Reports Server (NTRS)

1985-01-01

The initial demonstration model of a lunar base simulation is described. This initial model was developed on the personal computer level to demonstrate feasibility and technique before proceeding to a larger computer-based model. Lotus Symphony Version 1.1 software was used to base the demonstration model on an personal computer with an MS-DOS operating system. The personal computer-based model determined the applicability of lunar base modeling techniques developed at an LSPI/NASA workshop. In addition, the personnal computer-based demonstration model defined a modeling structure that could be employed on a larger, more comprehensive VAX-based lunar base simulation. Refinement of this personal computer model and the development of a VAX-based model is planned in the near future.

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

Developing Learning Tool of Control System Engineering Using Matrix Laboratory Software Oriented on Industrial Needs

NASA Astrophysics Data System (ADS)

Isnur Haryudo, Subuh; Imam Agung, Achmad; Firmansyah, Rifqi

2018-04-01

The purpose of this research is to develop learning media of control technique using Matrix Laboratory software with industry requirement approach. Learning media serves as a tool for creating a better and effective teaching and learning situation because it can accelerate the learning process in order to enhance the quality of learning. Control Techniques using Matrix Laboratory software can enlarge the interest and attention of students, with real experience and can grow independent attitude. This research design refers to the use of research and development (R & D) methods that have been modified by multi-disciplinary team-based researchers. This research used Computer based learning method consisting of computer and Matrix Laboratory software which was integrated with props. Matrix Laboratory has the ability to visualize the theory and analysis of the Control System which is an integration of computing, visualization and programming which is easy to use. The result of this instructional media development is to use mathematical equations using Matrix Laboratory software on control system application with DC motor plant and PID (Proportional-Integral-Derivative). Considering that manufacturing in the field of Distributed Control systems (DCSs), Programmable Controllers (PLCs), and Microcontrollers (MCUs) use PID systems in production processes are widely used in industry.

Cloud Based Educational Systems and Its Challenges and Opportunities and Issues

ERIC Educational Resources Information Center

Paul, Prantosh Kr.; Lata Dangwal, Kiran

2014-01-01

Cloud Computing (CC) is actually is a set of hardware, software, networks, storage, services an interface combines to deliver aspects of computing as a service. Cloud Computing (CC) actually uses the central remote servers to maintain data and applications. Practically Cloud Computing (CC) is extension of Grid computing with independency and…

Software-codec-based full motion video conferencing on the PC using visual pattern image sequence coding

NASA Astrophysics Data System (ADS)

Barnett, Barry S.; Bovik, Alan C.

1995-04-01

This paper presents a real time full motion video conferencing system based on the Visual Pattern Image Sequence Coding (VPISC) software codec. The prototype system hardware is comprised of two personal computers, two camcorders, two frame grabbers, and an ethernet connection. The prototype system software has a simple structure. It runs under the Disk Operating System, and includes a user interface, a video I/O interface, an event driven network interface, and a free running or frame synchronous video codec that also acts as the controller for the video and network interfaces. Two video coders have been tested in this system. Simple implementations of Visual Pattern Image Coding and VPISC have both proven to support full motion video conferencing with good visual quality. Future work will concentrate on expanding this prototype to support the motion compensated version of VPISC, as well as encompassing point-to-point modem I/O and multiple network protocols. The application will be ported to multiple hardware platforms and operating systems. The motivation for developing this prototype system is to demonstrate the practicality of software based real time video codecs. Furthermore, software video codecs are not only cheaper, but are more flexible system solutions because they enable different computer platforms to exchange encoded video information without requiring on-board protocol compatible video codex hardware. Software based solutions enable true low cost video conferencing that fits the `open systems' model of interoperability that is so important for building portable hardware and software applications.

Estimating Computer-Based Training Development Times

DTIC Science & Technology

1987-10-14

beginners , must be sure they interpret terms correctly. As a result of this informal validation, the authors suggest refinements in the tool which...Productivity tools available: automated design tools, text processor interfaces, flowcharting software, software interfaces a Multimedia interfaces e

Investigation into the development of computer aided design software for space based sensors

NASA Technical Reports Server (NTRS)

Pender, C. W.; Clark, W. L.

1987-01-01

The described effort is phase one of the development of a Computer Aided Design (CAD) software to be used to perform radiometric sensor design. The software package will be referred to as SCAD and is directed toward the preliminary phase of the design of space based sensor system. The approach being followed is to develop a modern, graphic intensive, user friendly software package using existing software as building blocks. The emphasis will be directed toward the development of a shell containing menus, smart defaults, and interfaces, which can accommodate a wide variety of existing application software packages. The shell will offer expected utilities such as graphics, tailored menus, and a variety of drivers for I/O devices. Following the development of the shell, the development of SCAD is planned as chiefly selection and integration of appropriate building blocks. The phase one development activities have included: the selection of hardware which will be used with SCAD; the determination of the scope of SCAD; the preliminary evaluation of a number of software packages for applicability to SCAD; determination of a method for achieving required capabilities where voids exist; and then establishing a strategy for binding the software modules into an easy to use tool kit.

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

Auto-Generated Semantic Processing Services

NASA Technical Reports Server (NTRS)

Davis, Rodney; Hupf, Greg

2009-01-01

Auto-Generated Semantic Processing (AGSP) Services is a suite of software tools for automated generation of other computer programs, denoted cross-platform semantic adapters, that support interoperability of computer-based communication systems that utilize a variety of both new and legacy communication software running in a variety of operating- system/computer-hardware combinations. AGSP has numerous potential uses in military, space-exploration, and other government applications as well as in commercial telecommunications. The cross-platform semantic adapters take advantage of common features of computer- based communication systems to enforce semantics, messaging protocols, and standards of processing of streams of binary data to ensure integrity of data and consistency of meaning among interoperating systems. The auto-generation aspect of AGSP Services reduces development time and effort by emphasizing specification and minimizing implementation: In effect, the design, building, and debugging of software for effecting conversions among complex communication protocols, custom device mappings, and unique data-manipulation algorithms is replaced with metadata specifications that map to an abstract platform-independent communications model. AGSP Services is modular and has been shown to be easily integrable into new and legacy NASA flight and ground communication systems.

EngineSim: Turbojet Engine Simulator Adapted for High School Classroom Use

NASA Technical Reports Server (NTRS)

Petersen, Ruth A.

2001-01-01

EngineSim is an interactive educational computer program that allows users to explore the effect of engine operation on total aircraft performance. The software is supported by a basic propulsion web site called the Beginner's Guide to Propulsion, which includes educator-created, web-based activities for the classroom use of EngineSim. In addition, educators can schedule videoconferencing workshops in which EngineSim's creator demonstrates the software and discusses its use in the educational setting. This software is a product of NASA Glenn Research Center's Learning Technologies Project, an educational outreach initiative within the High Performance Computing and Communications Program.

[MapDraw: a microsoft excel macro for drawing genetic linkage maps based on given genetic linkage data].

PubMed

Liu, Ren-Hu; Meng, Jin-Ling

2003-05-01

MAPMAKER is one of the most widely used computer software package for constructing genetic linkage maps.However, the PC version, MAPMAKER 3.0 for PC, could not draw the genetic linkage maps that its Macintosh version, MAPMAKER 3.0 for Macintosh,was able to do. Especially in recent years, Macintosh computer is much less popular than PC. Most of the geneticists use PC to analyze their genetic linkage data. So a new computer software to draw the same genetic linkage maps on PC as the MAPMAKER for Macintosh to do on Macintosh has been crying for. Microsoft Excel,one component of Microsoft Office package, is one of the most popular software in laboratory data processing. Microsoft Visual Basic for Applications (VBA) is one of the most powerful functions of Microsoft Excel. Using this program language, we can take creative control of Excel, including genetic linkage map construction, automatic data processing and more. In this paper, a Microsoft Excel macro called MapDraw is constructed to draw genetic linkage maps on PC computer based on given genetic linkage data. Use this software,you can freely construct beautiful genetic linkage map in Excel and freely edit and copy it to Word or other application. This software is just an Excel format file. You can freely copy it from ftp://211.69.140.177 or ftp://brassica.hzau.edu.cn and the source code can be found in Excel's Visual Basic Editor.

State-of-the-art Hydrology Education: Development of Windows-based and Web-based Interactive Teaching-Learning Software

NASA Astrophysics Data System (ADS)

Chu, X.

2011-12-01

This study, funded by the NSF CAREER program, focuses on developing new methods to quantify microtopography-controlled overland flow processes and integrating the cutting-edge hydrologic research with all-level education and outreach activities. To achieve the educational goal, an interactive teaching-learning software package has been developed. This software, with enhanced visualization capabilities, integrates the new modeling techniques, computer-guided learning processes, and education-oriented tools in a user-friendly interface. Both Windows-based and web-based versions have been developed. The software is specially designed for three major user levels: elementary level (Level 1: K-12 and outreach education), medium level (Level 2: undergraduate education), and advanced level (Level 3: graduate education). Depending on the levels, users are guided to different educational systems. Each system consists of a series of mini "libraries" featured with movies, pictures, and documentation that cover fundamental theories, varying scale experiments, and computer modeling of overland flow generation, surface runoff, and infiltration processes. Testing and practical use of this educational software in undergraduate and graduate teaching demonstrate its effectiveness to promote students' learning and interest in hydrologic sciences. This educational software also has been used as a hydrologic demonstration tool for K-12 students and Native American students through the Nurturing American Tribal Undergraduate Research Education (NATURE) program and Science, Technology, Engineering and Mathematics (STEM) outreach activities.

The software for automatic creation of the formal grammars used by speech recognition, computer vision, editable text conversion systems, and some new functions

NASA Astrophysics Data System (ADS)

Kardava, Irakli; Tadyszak, Krzysztof; Gulua, Nana; Jurga, Stefan

2017-02-01

For more flexibility of environmental perception by artificial intelligence it is needed to exist the supporting software modules, which will be able to automate the creation of specific language syntax and to make a further analysis for relevant decisions based on semantic functions. According of our proposed approach, of which implementation it is possible to create the couples of formal rules of given sentences (in case of natural languages) or statements (in case of special languages) by helping of computer vision, speech recognition or editable text conversion system for further automatic improvement. In other words, we have developed an approach, by which it can be achieved to significantly improve the training process automation of artificial intelligence, which as a result will give us a higher level of self-developing skills independently from us (from users). At the base of our approach we have developed a software demo version, which includes the algorithm and software code for the entire above mentioned component's implementation (computer vision, speech recognition and editable text conversion system). The program has the ability to work in a multi - stream mode and simultaneously create a syntax based on receiving information from several sources.

Central Data Processing System (CDPS) user's manual: Solar heating and cooling program

NASA Technical Reports Server (NTRS)

1976-01-01

The software and data base management system required to assess the performance of solar heating and cooling systems installed at multiple sites is presented. The instrumentation data associated with these systems is collected, processed, and presented in a form which supported continuity of performance evaluation across all applications. The CDPS consisted of three major elements: communication interface computer, central data processing computer, and performance evaluation data base. Users of the performance data base were identified, and procedures for operation, and guidelines for software maintenance were outlined. The manual also defined the output capabilities of the CDPS in support of external users of the system.

Building confidence and credibility amid growing model and computing complexity

NASA Astrophysics Data System (ADS)

Evans, K. J.; Mahajan, S.; Veneziani, C.; Kennedy, J. H.

2017-12-01

As global Earth system models are developed to answer an ever-wider range of science questions, software products that provide robust verification, validation, and evaluation must evolve in tandem. Measuring the degree to which these new models capture past behavior, predict the future, and provide the certainty of predictions is becoming ever more challenging for reasons that are generally well known, yet are still challenging to address. Two specific and divergent needs for analysis of the Accelerated Climate Model for Energy (ACME) model - but with a similar software philosophy - are presented to show how a model developer-based focus can address analysis needs during expansive model changes to provide greater fidelity and execute on multi-petascale computing facilities. A-PRIME is a python script-based quick-look overview of a fully-coupled global model configuration to determine quickly if it captures specific behavior before significant computer time and expense is invested. EVE is an ensemble-based software framework that focuses on verification of performance-based ACME model development, such as compiler or machine settings, to determine the equivalence of relevant climate statistics. The challenges and solutions for analysis of multi-petabyte output data are highlighted from the aspect of the scientist using the software, with the aim of fostering discussion and further input from the community about improving developer confidence and community credibility.

The NASA computer aided design and test system

NASA Technical Reports Server (NTRS)

Gould, J. M.; Juergensen, K.

1973-01-01

A family of computer programs facilitating the design, layout, evaluation, and testing of digital electronic circuitry is described. CADAT (computer aided design and test system) is intended for use by NASA and its contractors and is aimed predominantly at providing cost effective microelectronic subsystems based on custom designed metal oxide semiconductor (MOS) large scale integrated circuits (LSIC's). CADAT software can be easily adopted by installations with a wide variety of computer hardware configurations. Its structure permits ease of update to more powerful component programs and to newly emerging LSIC technologies. The components of the CADAT system are described stressing the interaction of programs rather than detail of coding or algorithms. The CADAT system provides computer aids to derive and document the design intent, includes powerful automatic layout software, permits detailed geometry checks and performance simulation based on mask data, and furnishes test pattern sequences for hardware testing.

Computer-Mediated Peer Review of Student Papers.

ERIC Educational Resources Information Center

Sullivan, Dave; Brown, Carol E.; Nielson, Norma L.

1998-01-01

Barriers to peer review of student work can be overcome using computer-mediated systems ranging from customized software to e-mail, multiuser object-oriented systems (MOOs), and Web-based projects. (SK)

A regional land use survey based on remote sensing and other data: A report on a LANDSAT and computer mapping project, volume 2

NASA Technical Reports Server (NTRS)

Nez, G. (Principal Investigator); Mutter, D.

1977-01-01

The author has identified the following significant results. The project mapped land use/cover classifications from LANDSAT computer compatible tape data and combined those results with other multisource data via computer mapping/compositing techniques to analyze various land use planning/natural resource management problems. Data were analyzed on 1:24,000 scale maps at 1.1 acre resolution. LANDSAT analysis software and linkages with other computer mapping software were developed. Significant results were also achieved in training, communication, and identification of needs for developing the LANDSAT/computer mapping technologies into operational tools for use by decision makers.

The software analysis project for the Office of Human Resources

NASA Technical Reports Server (NTRS)

Tureman, Robert L., Jr.

1994-01-01

There were two major sections of the project for the Office of Human Resources (OHR). The first section was to conduct a planning study to analyze software use with the goal of recommending software purchases and determining whether the need exists for a file server. The second section was analysis and distribution planning for retirement planning computer program entitled VISION provided by NASA Headquarters. The software planning study was developed to help OHR analyze the current administrative desktop computing environment and make decisions regarding software acquisition and implementation. There were three major areas addressed by the study: current environment new software requirements, and strategies regarding the implementation of a server in the Office. To gather data on current environment, employees were surveyed and an inventory of computers were produced. The surveys were compiled and analyzed by the ASEE fellow with interpretation help by OHR staff. New software requirements represented a compilation and analysis of the surveyed requests of OHR personnel. Finally, the information on the use of a server represents research done by the ASEE fellow and analysis of survey data to determine software requirements for a server. This included selection of a methodology to estimate the number of copies of each software program required given current use and estimated growth. The report presents the results of the computing survey, a description of the current computing environment, recommenations for changes in the computing environment, current software needs, management advantages of using a server, and management considerations in the implementation of a server. In addition, detailed specifications were presented for the hardware and software recommendations to offer a complete picture to OHR management. The retirement planning computer program available to NASA employees will aid in long-range retirement planning. The intended audience is the NASA civil service employee with several years until retirement. The employee enters current salary and savings information as well as goals concerning salary at retirement, assumptions on inflation, and the return on investments. The program produces a picture of the employee's retirement income from all sources based on the assumptions entered. A session showing features of the program was conducted for key personnel at the Center. After analysis, it was decided to offer the program through the Learning Center starting in August 1994.

Computer software.

PubMed

Rosenthal, L E

1986-10-01

Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

The SCEC Community Modeling Environment(SCEC/CME): A Collaboratory for Seismic Hazard Analysis

NASA Astrophysics Data System (ADS)

Maechling, P. J.; Jordan, T. H.; Minster, J. B.; Moore, R.; Kesselman, C.

2005-12-01

The SCEC Community Modeling Environment (SCEC/CME) Project is an NSF-supported Geosciences/IT partnership that is actively developing an advanced information infrastructure for system-level earthquake science in Southern California. This partnership includes SCEC, USC's Information Sciences Institute (ISI), the San Diego Supercomputer Center (SDSC), the Incorporated Institutions for Research in Seismology (IRIS), and the U.S. Geological Survey. The goal of the SCEC/CME is to develop seismological applications and information technology (IT) infrastructure to support the development of Seismic Hazard Analysis (SHA) programs and other geophysical simulations. The SHA application programs developed on the Project include a Probabilistic Seismic Hazard Analysis system called OpenSHA. OpenSHA computational elements that are currently available include a collection of attenuation relationships, and several Earthquake Rupture Forecasts (ERFs). Geophysicists in the collaboration have also developed Anelastic Wave Models (AWMs) using both finite-difference and finite-element approaches. Earthquake simulations using these codes have been run for a variety of earthquake sources. Rupture Dynamic Model (RDM) codes have also been developed that simulate friction-based fault slip. The SCEC/CME collaboration has also developed IT software and hardware infrastructure to support the development, execution, and analysis of these SHA programs. To support computationally expensive simulations, we have constructed a grid-based scientific workflow system. Using the SCEC grid, project collaborators can submit computations from the SCEC/CME servers to High Performance Computers at USC and TeraGrid High Performance Computing Centers. Data generated and archived by the SCEC/CME is stored in a digital library system, the Storage Resource Broker (SRB). This system provides a robust and secure system for maintaining the association between the data seta and their metadata. To provide an easy-to-use system for constructing SHA computations, a browser-based workflow assembly web portal has been developed. Users can compose complex SHA calculations, specifying SCEC/CME data sets as inputs to calculations, and calling SCEC/CME computational programs to process the data and the output. Knowledge-based software tools have been implemented that utilize ontological descriptions of SHA software and data can validate workflows created with this pathway assembly tool. Data visualization software developed by the collaboration supports analysis and validation of data sets. Several programs have been developed to visualize SCEC/CME data including GMT-based map making software for PSHA codes, 4D wavefield propagation visualization software based on OpenGL, and 3D Geowall-based visualization of earthquakes, faults, and seismic wave propagation. The SCEC/CME Project also helps to sponsor the SCEC UseIT Intern program. The UseIT Intern Program provides research opportunities in both Geosciences and Information Technology to undergraduate students in a variety of fields. The UseIT group has developed a 3D data visualization tool, called SCEC-VDO, as a part of this undergraduate research program.

Scalable computing for evolutionary genomics.

PubMed

Prins, Pjotr; Belhachemi, Dominique; Möller, Steffen; Smant, Geert

2012-01-01

Genomic data analysis in evolutionary biology is becoming so computationally intensive that analysis of multiple hypotheses and scenarios takes too long on a single desktop computer. In this chapter, we discuss techniques for scaling computations through parallelization of calculations, after giving a quick overview of advanced programming techniques. Unfortunately, parallel programming is difficult and requires special software design. The alternative, especially attractive for legacy software, is to introduce poor man's parallelization by running whole programs in parallel as separate processes, using job schedulers. Such pipelines are often deployed on bioinformatics computer clusters. Recent advances in PC virtualization have made it possible to run a full computer operating system, with all of its installed software, on top of another operating system, inside a "box," or virtual machine (VM). Such a VM can flexibly be deployed on multiple computers, in a local network, e.g., on existing desktop PCs, and even in the Cloud, to create a "virtual" computer cluster. Many bioinformatics applications in evolutionary biology can be run in parallel, running processes in one or more VMs. Here, we show how a ready-made bioinformatics VM image, named BioNode, effectively creates a computing cluster, and pipeline, in a few steps. This allows researchers to scale-up computations from their desktop, using available hardware, anytime it is required. BioNode is based on Debian Linux and can run on networked PCs and in the Cloud. Over 200 bioinformatics and statistical software packages, of interest to evolutionary biology, are included, such as PAML, Muscle, MAFFT, MrBayes, and BLAST. Most of these software packages are maintained through the Debian Med project. In addition, BioNode contains convenient configuration scripts for parallelizing bioinformatics software. Where Debian Med encourages packaging free and open source bioinformatics software through one central project, BioNode encourages creating free and open source VM images, for multiple targets, through one central project. BioNode can be deployed on Windows, OSX, Linux, and in the Cloud. Next to the downloadable BioNode images, we provide tutorials online, which empower bioinformaticians to install and run BioNode in different environments, as well as information for future initiatives, on creating and building such images.

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert

2005-01-01

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management andmore » software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.« less

Design and implementation of a cloud based lithography illumination pupil processing application

NASA Astrophysics Data System (ADS)

Zhang, Youbao; Ma, Xinghua; Zhu, Jing; Zhang, Fang; Huang, Huijie

2017-02-01

Pupil parameters are important parameters to evaluate the quality of lithography illumination system. In this paper, a cloud based full-featured pupil processing application is implemented. A web browser is used for the UI (User Interface), the websocket protocol and JSON format are used for the communication between the client and the server, and the computing part is implemented in the server side, where the application integrated a variety of high quality professional libraries, such as image processing libraries libvips and ImageMagic, automatic reporting system latex, etc., to support the program. The cloud based framework takes advantage of server's superior computing power and rich software collections, and the program could run anywhere there is a modern browser due to its web UI design. Compared to the traditional way of software operation model: purchased, licensed, shipped, downloaded, installed, maintained, and upgraded, the new cloud based approach, which is no installation, easy to use and maintenance, opens up a new way. Cloud based application probably is the future of the software development.

Final Technical Report - Center for Technology for Advanced Scientific Component Software (TASCS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sussman, Alan

2014-10-21

This is a final technical report for the University of Maryland work in the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS). The Maryland work focused on software tools for coupling parallel software components built using the Common Component Architecture (CCA) APIs. Those tools are based on the Maryland InterComm software framework that has been used in multiple computational science applications to build large-scale simulations of complex physical systems that employ multiple separately developed codes.

Effects of a Computer-Based Intervention Program on the Communicative Functions of Children with Autism

ERIC Educational Resources Information Center

Hetzroni, Orit E.; Tannous, Juman

2004-01-01

This study investigated the use of computer-based intervention for enhancing communication functions of children with autism. The software program was developed based on daily life activities in the areas of play, food, and hygiene. The following variables were investigated: delayed echolalia, immediate echolalia, irrelevant speech, relevant…

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

Reconfigurable vision system for real-time applications

NASA Astrophysics Data System (ADS)

Torres-Huitzil, Cesar; Arias-Estrada, Miguel

2002-03-01

Recently, a growing community of researchers has used reconfigurable systems to solve computationally intensive problems. Reconfigurability provides optimized processors for systems on chip designs, and makes easy to import technology to a new system through reusable modules. The main objective of this work is the investigation of a reconfigurable computer system targeted for computer vision and real-time applications. The system is intended to circumvent the inherent computational load of most window-based computer vision algorithms. It aims to build a system for such tasks by providing an FPGA-based hardware architecture for task specific vision applications with enough processing power, using the minimum amount of hardware resources as possible, and a mechanism for building systems using this architecture. Regarding the software part of the system, a library of pre-designed and general-purpose modules that implement common window-based computer vision operations is being investigated. A common generic interface is established for these modules in order to define hardware/software components. These components can be interconnected to develop more complex applications, providing an efficient mechanism for transferring image and result data among modules. Some preliminary results are presented and discussed.

HCI∧2 framework: a software framework for multimodal human-computer interaction systems.

PubMed

Shen, Jie; Pantic, Maja

2013-12-01

This paper presents a novel software framework for the development and research in the area of multimodal human-computer interface (MHCI) systems. The proposed software framework, which is called the HCI∧2 Framework, is built upon publish/subscribe (P/S) architecture. It implements a shared-memory-based data transport protocol for message delivery and a TCP-based system management protocol. The latter ensures that the integrity of system structure is maintained at runtime. With the inclusion of bridging modules, the HCI∧2 Framework is interoperable with other software frameworks including Psyclone and ActiveMQ. In addition to the core communication middleware, we also present the integrated development environment (IDE) of the HCI∧2 Framework. It provides a complete graphical environment to support every step in a typical MHCI system development process, including module development, debugging, packaging, and management, as well as the whole system management and testing. The quantitative evaluation indicates that our framework outperforms other similar tools in terms of average message latency and maximum data throughput under a typical single PC scenario. To demonstrate HCI∧2 Framework's capabilities in integrating heterogeneous modules, we present several example modules working with a variety of hardware and software. We also present an example of a full system developed using the proposed HCI∧2 Framework, which is called the CamGame system and represents a computer game based on hand-held marker(s) and low-cost camera(s).

Cloud Computing with iPlant Atmosphere.

PubMed

McKay, Sheldon J; Skidmore, Edwin J; LaRose, Christopher J; Mercer, Andre W; Noutsos, Christos

2013-10-15

Cloud Computing refers to distributed computing platforms that use virtualization software to provide easy access to physical computing infrastructure and data storage, typically administered through a Web interface. Cloud-based computing provides access to powerful servers, with specific software and virtual hardware configurations, while eliminating the initial capital cost of expensive computers and reducing the ongoing operating costs of system administration, maintenance contracts, power consumption, and cooling. This eliminates a significant barrier to entry into bioinformatics and high-performance computing for many researchers. This is especially true of free or modestly priced cloud computing services. The iPlant Collaborative offers a free cloud computing service, Atmosphere, which allows users to easily create and use instances on virtual servers preconfigured for their analytical needs. Atmosphere is a self-service, on-demand platform for scientific computing. This unit demonstrates how to set up, access and use cloud computing in Atmosphere. Copyright © 2013 John Wiley & Sons, Inc.

Challenges in Mentoring Software Development Projects in the High School: Analysis According to Shulman's Teacher Knowledge Base Model

ERIC Educational Resources Information Center

Meerbaum-Salant, Orni; Hazzan, Orit

2009-01-01

This paper focuses on challenges in mentoring software development projects in the high school and analyzes difficulties encountered by Computer Science teachers in the mentoring process according to Shulman's Teacher Knowledge Base Model. The main difficulties that emerged from the data analysis belong to the following knowledge sources of…

77 FR 50726 - Software Requirement Specifications for Digital Computer Software and Complex Electronics Used in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... Computer Software and Complex Electronics Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear...-1209, ``Software Requirement Specifications for Digital Computer Software and Complex Electronics used... Electronics Engineers (ANSI/IEEE) Standard 830-1998, ``IEEE Recommended Practice for Software Requirements...

Challenges to Software/Computing for Experimentation at the LHC

NASA Astrophysics Data System (ADS)

Banerjee, Sunanda

The demands of future high energy physics experiments towards software and computing have led the experiments to plan the related activities as a full-fledged project and to investigate new methodologies and languages to meet the challenges. The paths taken by the four LHC experiments ALICE, ATLAS, CMS and LHCb are coherently put together in an LHC-wide framework based on Grid technology. The current status and understandings have been broadly outlined.

Application Portable Parallel Library

NASA Technical Reports Server (NTRS)

Cole, Gary L.; Blech, Richard A.; Quealy, Angela; Townsend, Scott

1995-01-01

Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.

[Use of computer technologies for studying the morphological characteristics of the iris color in anthropology].

PubMed

Dorofeeva, A A; Khrustalev, A V; Krylov, Iu V; Bocharov, D A; Negasheva, M A

2010-01-01

Digital images of the iris were received for study peculiarities of the iris color during the anthropological examination of 578 students aged 16-24 years. Simultaneously with the registration of the digital images, the visual assessment of the eye color was carried out using the traditional scale of Bunak, based on 12 ocular prostheses. Original software for automatic determination of the iris color based on 12 classes scale of Bunak was designed, and computer version of that scale was developed. The software proposed allows to conduct the determination of the iris color with high validity based on numerical evaluation; its application may reduce the bias due to subjective assessment and methodological divergences of the different researchers. The software designed for automatic determination of the iris color may help develop both theoretical and applied anthropology, it may be used in forensic and emergency medicine, sports medicine, medico-genetic counseling and professional selection.

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

Instructional design in mathematics for undergraduate students based on learning by mistakes approach utilizing scilab assistance

NASA Astrophysics Data System (ADS)

Kartika, H.

2018-03-01

The issue related to making mistake while learning such as negative emotion is found while students learn mathematics with the aid of a computer. When the computer output showed a mistake message, the students considered it as a computer software malfunction. Based on this issue, the writer designs an instructional model based on learning by mistake approach and which is Scilab assisted. The method used in this research is research design involving undergraduate students in matrix algebra courses. The data collected throught survey with questionnaire to gain feedback about the approach implemented. The data analyzed using quantitative descriptive. The instructional design proposed is the student act as a mistake corrector while the teacher acts as a mistake maker. Teacher deliberately makes mistakes with the help of Scilab software. On the other hand, students correct, analyze and explain errors resulting from Scilab software. The result of this research is an ICT based instructional design which is expected to be applicable as an alternative learning in directing students to think positively about mistakes in learning. Furthermore, students are also expected to improve their ability in understanding and thinking critically while solving problems and improving themselves in learning mathematics.

Evolving technologies for Space Station Freedom computer-based workstations

NASA Technical Reports Server (NTRS)

Jensen, Dean G.; Rudisill, Marianne

1990-01-01

Viewgraphs on evolving technologies for Space Station Freedom computer-based workstations are presented. The human-computer computer software environment modules are described. The following topics are addressed: command and control workstation concept; cupola workstation concept; Japanese experiment module RMS workstation concept; remote devices controlled from workstations; orbital maneuvering vehicle free flyer; remote manipulator system; Japanese experiment module exposed facility; Japanese experiment module small fine arm; flight telerobotic servicer; human-computer interaction; and workstation/robotics related activities.

Video Conferencing: The Next Wave for International Business Communication.

ERIC Educational Resources Information Center

Sondak, Norman E.; Sondak, Eileen M.

This paper suggests that desktop computer-based video conferencing, with high fidelity sound, and group software support, is emerging as a major communications option. Briefly addressed are the following critical factors that are propelling the computer-based video conferencing revolution: (1) widespread availability of desktop computers…

A Computer Based Training Program for the Development of Student Handouts and Other Training Aids.

ERIC Educational Resources Information Center

Paquin, David C.

A computer-based training program was used to teach technical instructors at the Long Island Lighting Company how to create student handouts of textbook quality with a computer, software, and laser printer. All five learners successfully completed the course objective, which was to produce a one-page handout that contained text and graphics,…

Computer-aided system design

NASA Technical Reports Server (NTRS)

Walker, Carrie K.

1991-01-01

A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

Faster than Real-Time Dynamic Simulation for Large-Size Power System with Detailed Dynamic Models using High-Performance Computing Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Renke; Jin, Shuangshuang; Chen, Yousu

This paper presents a faster-than-real-time dynamic simulation software package that is designed for large-size power system dynamic simulation. It was developed on the GridPACKTM high-performance computing (HPC) framework. The key features of the developed software package include (1) faster-than-real-time dynamic simulation for a WECC system (17,000 buses) with different types of detailed generator, controller, and relay dynamic models, (2) a decoupled parallel dynamic simulation algorithm with optimized computation architecture to better leverage HPC resources and technologies, (3) options for HPC-based linear and iterative solvers, (4) hidden HPC details, such as data communication and distribution, to enable development centered on mathematicalmore » models and algorithms rather than on computational details for power system researchers, and (5) easy integration of new dynamic models and related algorithms into the software package.« less

Ndarts

NASA Technical Reports Server (NTRS)

Jain, Abhinandan

2011-01-01

Ndarts software provides algorithms for computing quantities associated with the dynamics of articulated, rigid-link, multibody systems. It is designed as a general-purpose dynamics library that can be used for the modeling of robotic platforms, space vehicles, molecular dynamics, and other such applications. The architecture and algorithms in Ndarts are based on the Spatial Operator Algebra (SOA) theory for computational multibody and robot dynamics developed at JPL. It uses minimal, internal coordinate models. The algorithms are low-order, recursive scatter/ gather algorithms. In comparison with the earlier Darts++ software, this version has a more general and cleaner design needed to support a larger class of computational dynamics needs. It includes a frames infrastructure, allows algorithms to operate on subgraphs of the system, and implements lazy and deferred computation for better efficiency. Dynamics modeling modules such as Ndarts are core building blocks of control and simulation software for space, robotic, mechanism, bio-molecular, and material systems modeling.

Security Risks of Cloud Computing and Its Emergence as 5th Utility Service

NASA Astrophysics Data System (ADS)

Ahmad, Mushtaq

Cloud Computing is being projected by the major cloud services provider IT companies such as IBM, Google, Yahoo, Amazon and others as fifth utility where clients will have access for processing those applications and or software projects which need very high processing speed for compute intensive and huge data capacity for scientific, engineering research problems and also e- business and data content network applications. These services for different types of clients are provided under DASM-Direct Access Service Management based on virtualization of hardware, software and very high bandwidth Internet (Web 2.0) communication. The paper reviews these developments for Cloud Computing and Hardware/Software configuration of the cloud paradigm. The paper also examines the vital aspects of security risks projected by IT Industry experts, cloud clients. The paper also highlights the cloud provider's response to cloud security risks.

The mission events graphic generator software: A small tool with big results

NASA Technical Reports Server (NTRS)

Lupisella, Mark; Leibee, Jack; Scaffidi, Charles

1993-01-01

Utilization of graphics has long been a useful methodology for many aspects of spacecraft operations. A personal computer based software tool that implements straight-forward graphics and greatly enhances spacecraft operations is presented. This unique software tool is the Mission Events Graphic Generator (MEGG) software which is used in support of the Hubble Space Telescope (HST) Project. MEGG reads the HST mission schedule and generates a graphical timeline.

Description of research interests and current work related to automating software design

NASA Technical Reports Server (NTRS)

Kaindl, Hermann

1992-01-01

Enclosed is a list of selected and recent publications. Most of these publications concern applied research in the areas of software engineering and human-computer interaction. It is felt that domain-specific knowledge plays a major role in software development. Additionally, it is believed that improvements in the general software development process (e.g., object-oriented approaches) will have to be combined with the use of large domain-specific knowledge bases.

Synesthetic art through 3-D projection: The requirements of a computer-based supermedium

NASA Technical Reports Server (NTRS)

Mallary, Robert

1989-01-01

A computer-based form of multimedia art is proposed that uses the computer to fuse aspects of painting, sculpture, dance, music, film, and other media into a one-to-one synthesia of image and sound for spatially synchronous 3-D projection. Called synesthetic art, this conversion of many varied media into an aesthetically unitary experience determines the character and requirements of the system and its software. During the start-up phase, computer stereographic systems are unsuitable for software development. Eventually, a new type of illusory-projective supermedium will be required to achieve the needed combination of large-format projection and convincing real life presence, and to handle the vast amount of 3-D visual and acoustic information required. The influence of the concept on the author's research and creative work is illustrated through two examples.

Enabling Disabled Persons to Gain Access to Digital Media

NASA Technical Reports Server (NTRS)

Beach, Glenn; OGrady, Ryan

2011-01-01

A report describes the first phase in an effort to enhance the NaviGaze software to enable profoundly disabled persons to operate computers. (Running on a Windows-based computer equipped with a video camera aimed at the user s head, the original NaviGaze software processes the user's head movements and eye blinks into cursor movements and mouse clicks to enable hands-free control of the computer.) To accommodate large variations in movement capabilities among disabled individuals, one of the enhancements was the addition of a graphical user interface for selection of parameters that affect the way the software interacts with the computer and tracks the user s movements. Tracking algorithms were improved to reduce sensitivity to rotations and reduce the likelihood of tracking the wrong features. Visual feedback to the user was improved to provide an indication of the state of the computer system. It was found that users can quickly learn to use the enhanced software, performing single clicks, double clicks, and drags within minutes of first use. Available programs that could increase the usability of NaviGaze were identified. One of these enables entry of text by using NaviGaze as a mouse to select keys on a virtual keyboard.

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

35 Ways to Take a "Byte" out of Software Costs. Fund Raising Ideas from COMPress Customers.

ERIC Educational Resources Information Center

COMPress, Wentworth, NH.

Based on a survey sponsored by COMPress Quarterly of various schools to determine the extent of the problem of lack of funds for purchasing computer software and how schools have coped with the problem, this booklet describes numerous ways to raise funds for software purchases. Nearly 1,000 questionnaires were returned and this booklet was…

The Computer Bulletin Board.

ERIC Educational Resources Information Center

Batt, Russell H., Ed.

1989-01-01

Discussed are some uses of computers in chemistry classrooms. Described are: (1) interactive chromatographic analysis software; (2) computer interface for a digital frequency-period-counter-ratio meter and analog interface based on a voltage-to-frequency converter; and (3) use of spectrometer/microcomputer arrangement for teaching atomic theory.…

Output Devices, Computation, and the Future of Mathematical Crafts.

ERIC Educational Resources Information Center

Eisenberg, Michael

2002-01-01

The advent of powerful, affordable output devices offers the potential for a vastly expanded landscape of computationally-enriched mathematical craft activities in education. Craft activities have both intellectual and emotional affordances that are relatively lacking in "traditional" computer-based education. Describes three software applications…

GPU-accelerated Lattice Boltzmann method for anatomical extraction in patient-specific computational hemodynamics

NASA Astrophysics Data System (ADS)

Yu, H.; Wang, Z.; Zhang, C.; Chen, N.; Zhao, Y.; Sawchuk, A. P.; Dalsing, M. C.; Teague, S. D.; Cheng, Y.

2014-11-01

Existing research of patient-specific computational hemodynamics (PSCH) heavily relies on software for anatomical extraction of blood arteries. Data reconstruction and mesh generation have to be done using existing commercial software due to the gap between medical image processing and CFD, which increases computation burden and introduces inaccuracy during data transformation thus limits the medical applications of PSCH. We use lattice Boltzmann method (LBM) to solve the level-set equation over an Eulerian distance field and implicitly and dynamically segment the artery surfaces from radiological CT/MRI imaging data. The segments seamlessly feed to the LBM based CFD computation of PSCH thus explicit mesh construction and extra data management are avoided. The LBM is ideally suited for GPU (graphic processing unit)-based parallel computing. The parallel acceleration over GPU achieves excellent performance in PSCH computation. An application study will be presented which segments an aortic artery from a chest CT dataset and models PSCH of the segmented artery.

Software for Testing Electroactive Structural Components

NASA Technical Reports Server (NTRS)

Moses, Robert W.; Fox, Robert L.; Dimery, Archie D.; Bryant, Robert G.; Shams, Qamar

2003-01-01

A computer program generates a graphical user interface that, in combination with its other features, facilitates the acquisition and preprocessing of experimental data on the strain response, hysteresis, and power consumption of a multilayer composite-material structural component containing one or more built-in sensor(s) and/or actuator(s) based on piezoelectric materials. This program runs in conjunction with Lab-VIEW software in a computer-controlled instrumentation system. For a test, a specimen is instrumented with appliedvoltage and current sensors and with strain gauges. Once the computational connection to the test setup has been made via the LabVIEW software, this program causes the test instrumentation to step through specified configurations. If the user is satisfied with the test results as displayed by the software, the user activates an icon on a front-panel display, causing the raw current, voltage, and strain data to be digitized and saved. The data are also put into a spreadsheet and can be plotted on a graph. Graphical displays are saved in an image file for future reference. The program also computes and displays the power and the phase angle between voltage and current.

F-Nets and Software Cabling: Deriving a Formal Model and Language for Portable Parallel Programming

NASA Technical Reports Server (NTRS)

DiNucci, David C.; Saini, Subhash (Technical Monitor)

1998-01-01

Parallel programming is still being based upon antiquated sequence-based definitions of the terms "algorithm" and "computation", resulting in programs which are architecture dependent and difficult to design and analyze. By focusing on obstacles inherent in existing practice, a more portable model is derived here, which is then formalized into a model called Soviets which utilizes a combination of imperative and functional styles. This formalization suggests more general notions of algorithm and computation, as well as insights into the meaning of structured programming in a parallel setting. To illustrate how these principles can be applied, a very-high-level graphical architecture-independent parallel language, called Software Cabling, is described, with many of the features normally expected from today's computer languages (e.g. data abstraction, data parallelism, and object-based programming constructs).

Computer Aided Teaching of Digital Signal Processing.

ERIC Educational Resources Information Center

Castro, Ian P.

1990-01-01

Describes a microcomputer-based software package developed at the University of Surrey for teaching digital signal processing to undergraduate science and engineering students. Menu-driven software capabilities are explained, including demonstration of qualitative concepts and experimentation with quantitative data, and examples are given of…

Enhancing performance of LCoS-SLM as adaptive optics by using computer-generated holograms modulation software

NASA Astrophysics Data System (ADS)

Tsai, Chun-Wei; Lyu, Bo-Han; Wang, Chen; Hung, Cheng-Chieh

2017-05-01

We have already developed multi-function and easy-to-use modulation software that was based on LabVIEW system. There are mainly four functions in this modulation software, such as computer generated holograms (CGH) generation, CGH reconstruction, image trimming, and special phase distribution. Based on the above development of CGH modulation software, we could enhance the performance of liquid crystal on silicon - spatial light modulator (LCoSSLM) as similar as the diffractive optical element (DOE) and use it on various adaptive optics (AO) applications. Through the development of special phase distribution, we are going to use the LCoS-SLM with CGH modulation software into AO technology, such as optical microscope system. When the LCOS-SLM panel is integrated in an optical microscope system, it could be placed on the illumination path or on the image forming path. However, LCOS-SLM provides a program-controllable liquid crystal array for optical microscope. It dynamically changes the amplitude or phase of light and gives the obvious advantage, "Flexibility", to the system

Stencil computations for PDE-based applications with examples from DUNE and hypre

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engwer, C.; Falgout, R. D.; Yang, U. M.

Here, stencils are commonly used to implement efficient on–the–fly computations of linear operators arising from partial differential equations. At the same time the term “stencil” is not fully defined and can be interpreted differently depending on the application domain and the background of the software developers. Common features in stencil codes are the preservation of the structure given by the discretization of the partial differential equation and the benefit of minimal data storage. We discuss stencil concepts of different complexity, show how they are used in modern software packages like hypre and DUNE, and discuss recent efforts to extend themore » software to enable stencil computations of more complex problems and methods such as inf–sup–stable Stokes discretizations and mixed finite element discretizations.« less

Stencil computations for PDE-based applications with examples from DUNE and hypre

DOE PAGES

Engwer, C.; Falgout, R. D.; Yang, U. M.

2017-02-24

Here, stencils are commonly used to implement efficient on–the–fly computations of linear operators arising from partial differential equations. At the same time the term “stencil” is not fully defined and can be interpreted differently depending on the application domain and the background of the software developers. Common features in stencil codes are the preservation of the structure given by the discretization of the partial differential equation and the benefit of minimal data storage. We discuss stencil concepts of different complexity, show how they are used in modern software packages like hypre and DUNE, and discuss recent efforts to extend themore » software to enable stencil computations of more complex problems and methods such as inf–sup–stable Stokes discretizations and mixed finite element discretizations.« less

SU-D-BRD-02: A Web-Based Image Processing and Plan Evaluation Platform (WIPPEP) for Future Cloud-Based Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chai, X; Liu, L; Xing, L

Purpose: Visualization and processing of medical images and radiation treatment plan evaluation have traditionally been constrained to local workstations with limited computation power and ability of data sharing and software update. We present a web-based image processing and planning evaluation platform (WIPPEP) for radiotherapy applications with high efficiency, ubiquitous web access, and real-time data sharing. Methods: This software platform consists of three parts: web server, image server and computation server. Each independent server communicates with each other through HTTP requests. The web server is the key component that provides visualizations and user interface through front-end web browsers and relay informationmore » to the backend to process user requests. The image server serves as a PACS system. The computation server performs the actual image processing and dose calculation. The web server backend is developed using Java Servlets and the frontend is developed using HTML5, Javascript, and jQuery. The image server is based on open source DCME4CHEE PACS system. The computation server can be written in any programming language as long as it can send/receive HTTP requests. Our computation server was implemented in Delphi, Python and PHP, which can process data directly or via a C++ program DLL. Results: This software platform is running on a 32-core CPU server virtually hosting the web server, image server, and computation servers separately. Users can visit our internal website with Chrome browser, select a specific patient, visualize image and RT structures belonging to this patient and perform image segmentation running Delphi computation server and Monte Carlo dose calculation on Python or PHP computation server. Conclusion: We have developed a webbased image processing and plan evaluation platform prototype for radiotherapy. This system has clearly demonstrated the feasibility of performing image processing and plan evaluation platform through a web browser and exhibited potential for future cloud based radiotherapy.« less

The Simultaneous Production Model; A Model for the Construction, Testing, Implementation and Revision of Educational Computer Simulation Environments.

ERIC Educational Resources Information Center

Zillesen, Pieter G. van Schaick

This paper introduces a hardware and software independent model for producing educational computer simulation environments. The model, which is based on the results of 32 studies of educational computer simulations program production, implies that educational computer simulation environments are specified, constructed, tested, implemented, and…

The Evolution of Computer Based Learning Software Design: Computer Assisted Teaching Unit Experience.

ERIC Educational Resources Information Center

Blandford, A. E.; Smith, P. R.

1986-01-01

Describes the style of design of computer simulations developed by Computer Assisted Teaching Unit at Queen Mary College with reference to user interface, input and initialization, input data vetting, effective display screen use, graphical results presentation, and need for hard copy. Procedures and problems relating to academic involvement are…

Models of Educational Computing @ Home: New Frontiers for Research on Technology in Learning.

ERIC Educational Resources Information Center

Kafai, Yasmin B.; Fishman, Barry J.; Bruckman, Amy S.; Rockman, Saul

2002-01-01

Discusses models of home educational computing that are linked to learning in school and recommends the need for research that addresses the home as a computer-based learning environment. Topics include a history of research on educational computing at home; technological infrastructure, including software and compatibility; Internet access;…

Verifying Diagnostic Software

NASA Technical Reports Server (NTRS)

Lindsey, Tony; Pecheur, Charles

2004-01-01

Livingstone PathFinder (LPF) is a simulation-based computer program for verifying autonomous diagnostic software. LPF is designed especially to be applied to NASA s Livingstone computer program, which implements a qualitative-model-based algorithm that diagnoses faults in a complex automated system (e.g., an exploratory robot, spacecraft, or aircraft). LPF forms a software test bed containing a Livingstone diagnosis engine, embedded in a simulated operating environment consisting of a simulator of the system to be diagnosed by Livingstone and a driver program that issues commands and faults according to a nondeterministic scenario provided by the user. LPF runs the test bed through all executions allowed by the scenario, checking for various selectable error conditions after each step. All components of the test bed are instrumented, so that execution can be single-stepped both backward and forward. The architecture of LPF is modular and includes generic interfaces to facilitate substitution of alternative versions of its different parts. Altogether, LPF provides a flexible, extensible framework for simulation-based analysis of diagnostic software; these characteristics also render it amenable to application to diagnostic programs other than Livingstone.

Safety Metrics for Human-Computer Controlled Systems

NASA Technical Reports Server (NTRS)

Leveson, Nancy G; Hatanaka, Iwao

2000-01-01

The rapid growth of computer technology and innovation has played a significant role in the rise of computer automation of human tasks in modem production systems across all industries. Although the rationale for automation has been to eliminate "human error" or to relieve humans from manual repetitive tasks, various computer-related hazards and accidents have emerged as a direct result of increased system complexity attributed to computer automation. The risk assessment techniques utilized for electromechanical systems are not suitable for today's software-intensive systems or complex human-computer controlled systems.This thesis will propose a new systemic model-based framework for analyzing risk in safety-critical systems where both computers and humans are controlling safety-critical functions. A new systems accident model will be developed based upon modem systems theory and human cognitive processes to better characterize system accidents, the role of human operators, and the influence of software in its direct control of significant system functions Better risk assessments will then be achievable through the application of this new framework to complex human-computer controlled systems.

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

77 FR 50722 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software...) is issuing for public comment draft regulatory guide (DG), DG-1208, ``Software Unit Testing for Digital Computer Software used in Safety Systems of Nuclear Power Plants.'' The DG-1208 is proposed...

78 FR 47011 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software... revised regulatory guide (RG), revision 1 of RG 1.171, ``Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.'' This RG endorses American National Standards...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

Integration of LCoS-SLM and LabVIEW based software to simulate fundamental optics, wave optics, and Fourier optics

NASA Astrophysics Data System (ADS)

Lyu, Bo-Han; Wang, Chen; Tsai, Chun-Wei

2017-08-01

Jasper Display Corp. (JDC) offer high reflectivity, high resolution Liquid Crystal on Silicon - Spatial Light Modulator (LCoS-SLM) which include an associated controller ASIC and LabVIEW based modulation software. Based on this LCoS-SLM, also called Education Kit (EDK), we provide a training platform which includes a series of optical theory and experiments to university students. This EDK not only provides a LabVIEW based operation software to produce Computer Generated Holograms (CGH) to generate some basic diffraction image or holographic image, but also provides simulation software to verity the experiment results simultaneously. However, we believe that a robust LCoSSLM, operation software, simulation software, training system, and training course can help students to study the fundamental optics, wave optics, and Fourier optics more easily. Based on these fundamental knowledges, they could develop their unique skills and create their new innovations on the optoelectronic application in the future.

Towards early software reliability prediction for computer forensic tools (case study).

PubMed

Abu Talib, Manar

2016-01-01

Versatility, flexibility and robustness are essential requirements for software forensic tools. Researchers and practitioners need to put more effort into assessing this type of tool. A Markov model is a robust means for analyzing and anticipating the functioning of an advanced component based system. It is used, for instance, to analyze the reliability of the state machines of real time reactive systems. This research extends the architecture-based software reliability prediction model for computer forensic tools, which is based on Markov chains and COSMIC-FFP. Basically, every part of the computer forensic tool is linked to a discrete time Markov chain. If this can be done, then a probabilistic analysis by Markov chains can be performed to analyze the reliability of the components and of the whole tool. The purposes of the proposed reliability assessment method are to evaluate the tool's reliability in the early phases of its development, to improve the reliability assessment process for large computer forensic tools over time, and to compare alternative tool designs. The reliability analysis can assist designers in choosing the most reliable topology for the components, which can maximize the reliability of the tool and meet the expected reliability level specified by the end-user. The approach of assessing component-based tool reliability in the COSMIC-FFP context is illustrated with the Forensic Toolkit Imager case study.

Computer-Guided Deep Brain Stimulation Programming for Parkinson's Disease.

PubMed

Heldman, Dustin A; Pulliam, Christopher L; Urrea Mendoza, Enrique; Gartner, Maureen; Giuffrida, Joseph P; Montgomery, Erwin B; Espay, Alberto J; Revilla, Fredy J

2016-02-01

Pilot study to evaluate computer-guided deep brain stimulation (DBS) programming designed to optimize stimulation settings using objective motion sensor-based motor assessments. Seven subjects (five males; 54-71 years) with Parkinson's disease (PD) and recently implanted DBS systems participated in this pilot study. Within two months of lead implantation, the subject returned to the clinic to undergo computer-guided programming and parameter selection. A motion sensor was placed on the index finger of the more affected hand. Software guided a monopolar survey during which monopolar stimulation on each contact was iteratively increased followed by an automated assessment of tremor and bradykinesia. After completing assessments at each setting, a software algorithm determined stimulation settings designed to minimize symptom severities, side effects, and battery usage. Optimal DBS settings were chosen based on average severity of motor symptoms measured by the motion sensor. Settings chosen by the software algorithm identified a therapeutic window and improved tremor and bradykinesia by an average of 35.7% compared with baseline in the "off" state (p < 0.01). Motion sensor-based computer-guided DBS programming identified stimulation parameters that significantly improved tremor and bradykinesia with minimal clinician involvement. Automated motion sensor-based mapping is worthy of further investigation and may one day serve to extend programming to populations without access to specialized DBS centers. © 2015 International Neuromodulation Society.

Study on Spacelab software development and integration concepts

NASA Technical Reports Server (NTRS)

1974-01-01

A study was conducted to define the complexity and magnitude of the Spacelab software challenge. The study was based on current Spacelab program concepts, anticipated flight schedules, and ground operation plans. The study was primarily directed toward identifying and solving problems related to the experiment flight application and tests and checkout software executing in the Spacelab onboard command and data management subsystem (CDMS) computers and electrical ground support equipment (EGSE). The study provides a conceptual base from which it is possible to proceed into the development phase of the Software Test and Integration Laboratory (STIL) and establishes guidelines for the definition of standards which will ensure that the total Spacelab software is understood prior to entering development.

Legal Issues and Computer Use by School-Based Audiologists and Speech-Language Pathologists.

ERIC Educational Resources Information Center

Wynne, Michael K.; Hurst, David S.

1995-01-01

This article reviews ethical and legal issues regarding school-based integration and application of technologies, particularly when used by speech-language pathologists and audiologists. Four issues are addressed: (1) software copyright and licensed use; (2) information access and the right to privacy; (3) computer-assisted or…

Helping Students Adapt to Computer-Based Encrypted Examinations

ERIC Educational Resources Information Center

Baker-Eveleth, Lori; Eveleth, Daniel M.; O'Neill, Michele; Stone, Robert W.

2006-01-01

The College of Business and Economics at the University of Idaho conducted a pilot study that used commercially available encryption software called Securexam to deliver computer-based examinations. A multi-step implementation procedure was developed, implemented, and then evaluated on the basis of what students viewed as valuable. Two key aspects…

Guidelines for Developing Computer Based Resource Units. Revised.

ERIC Educational Resources Information Center

State Univ. of New York, Buffalo. Coll. at Buffalo. Educational Research and Development Complex.

Presented for use with normal and handicapped children are guidelines for the development of computer based resource units organized into two operations: one of which is the production of software which includes the writing of instructional objectives, content, activities, materials, and measuring devices; and the other the coding of the software…

EOS MLS Level 2 Data Processing Software Version 3

NASA Technical Reports Server (NTRS)

Livesey, Nathaniel J.; VanSnyder, Livesey W.; Read, William G.; Schwartz, Michael J.; Lambert, Alyn; Santee, Michelle L.; Nguyen, Honghanh T.; Froidevaux, Lucien; wang, Shuhui; Manney, Gloria L.;

Sharing Research Models: Using Software Engineering Practices for Facilitation

PubMed Central

Bryant, Stephanie P.; Solano, Eric; Cantor, Susanna; Cooley, Philip C.; Wagener, Diane K.

2011-01-01

Increasingly, researchers are turning to computational models to understand the interplay of important variables on systems’ behaviors. Although researchers may develop models that meet the needs of their investigation, application limitations—such as nonintuitive user interface features and data input specifications—may limit the sharing of these tools with other research groups. By removing these barriers, other research groups that perform related work can leverage these work products to expedite their own investigations. The use of software engineering practices can enable managed application production and shared research artifacts among multiple research groups by promoting consistent models, reducing redundant effort, encouraging rigorous peer review, and facilitating research collaborations that are supported by a common toolset. This report discusses three established software engineering practices— the iterative software development process, object-oriented methodology, and Unified Modeling Language—and the applicability of these practices to computational model development. Our efforts to modify the MIDAS TranStat application to make it more user-friendly are presented as an example of how computational models that are based on research and developed using software engineering practices can benefit a broader audience of researchers. PMID:21687780

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

LEGOS: Object-based software components for mission-critical systems. Final report, June 1, 1995--December 31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-08-01

An estimated 85% of the installed base of software is a custom application with a production quantity of one. In practice, almost 100% of military software systems are custom software. Paradoxically, the marginal costs of producing additional units are near zero. So why hasn`t the software market, a market with high design costs and low productions costs evolved like other similar custom widget industries, such as automobiles and hardware chips? The military software industry seems immune to market pressures that have motivated a multilevel supply chain structure in other widget industries: design cost recovery, improve quality through specialization, and enablemore » rapid assembly from purchased components. The primary goal of the ComponentWare Consortium (CWC) technology plan was to overcome barriers to building and deploying mission-critical information systems by using verified, reusable software components (Component Ware). The adoption of the ComponentWare infrastructure is predicated upon a critical mass of the leading platform vendors` inevitable adoption of adopting emerging, object-based, distributed computing frameworks--initially CORBA and COM/OLE. The long-range goal of this work is to build and deploy military systems from verified reusable architectures. The promise of component-based applications is to enable developers to snap together new applications by mixing and matching prefabricated software components. A key result of this effort is the concept of reusable software architectures. A second important contribution is the notion that a software architecture is something that can be captured in a formal language and reused across multiple applications. The formalization and reuse of software architectures provide major cost and schedule improvements. The Unified Modeling Language (UML) is fast becoming the industry standard for object-oriented analysis and design notation for object-based systems. However, the lack of a standard real-time distributed object operating system, lack of a standard Computer-Aided Software Environment (CASE) tool notation and lack of a standard CASE tool repository has limited the realization of component software. The approach to fulfilling this need is the software component factory innovation. The factory approach takes advantage of emerging standards such as UML, CORBA, Java and the Internet. The key technical innovation of the software component factory is the ability to assemble and test new system configurations as well as assemble new tools on demand from existing tools and architecture design repositories.« less

Users guide for STHARVEST: software to estimate the cost of harvesting small timber.

Treesearch

Roger D. Fight; Xiaoshan Zhang; Bruce R. Hartsough

2003-01-01

The STHARVEST computer application is Windows-based, public-domain software used to estimate costs for harvesting small-diameter stands or the small-diameter component of a mixed-sized stand. The equipment production rates were developed from existing studies. Equipment operating cost rates were based on November 1998 prices for new equipment and wage rates for the...

[Veneer computer aided design based on reverse engineering technology].

PubMed

Liu, Ming-li; Chen, Xiao-dong; Wang, Yong

2012-03-01

To explore the computer aided design (CAD) method of veneer restoration, and to assess if the solution can help prosthesis meet morphology esthetics standard. A volunteer's upper right central incisor needed to be restored with veneer. Super hard stone models of patient's dentition (before and after tooth preparation) were scanned with the three-dimensional laser scanner. The veneer margin was designed as butt-to-butt type. The veneer was constructed using reverse engineering (RE) software. The technique guideline of veneers CAD was explore based on RE software, and the veneers was smooth, continuous and symmetrical, which met esthetics construction needs. It was a feasible method to reconstruct veneer restoration based on RE technology.

Review of the Water Resources Information System of Argentina

USGS Publications Warehouse

Hutchison, N.E.

1987-01-01

A representative of the U.S. Geological Survey traveled to Buenos Aires, Argentina, in November 1986, to discuss water information systems and data bank implementation in the Argentine Government Center for Water Resources Information. Software has been written by Center personnel for a minicomputer to be used to manage inventory (index) data and water quality data. Additional hardware and software have been ordered to upgrade the existing computer. Four microcomputers, statistical and data base management software, and network hardware and software for linking the computers have also been ordered. The Center plans to develop a nationwide distributed data base for Argentina that will include the major regional offices as nodes. Needs for continued development of the water resources information system for Argentina were reviewed. Identified needs include: (1) conducting a requirements analysis to define the content of the data base and insure that all user requirements are met, (2) preparing a plan for the development, implementation, and operation of the data base, and (3) developing a conceptual design to inform all development personnel and users of the basic functionality planned for the system. A quality assurance and configuration management program to provide oversight to the development process was also discussed. (USGS)

Turned on to Language Arts: Computer Literacy in the Primary Grades.

ERIC Educational Resources Information Center

Guthrie, Larry F.; Richardson, Susan

1995-01-01

Describes Apple Computer's Early Language Connections (ELC) program. Designed for K-2 grades, ELC integrates Macintosh computers, children's literature, instructional software, and other curriculum materials, including sample lessons constructed around thematic units. The literature-based product uses a whole-language approach (with phonics…

Technology Trends: Buying a Computer.

ERIC Educational Resources Information Center

Strot, Melody; Benno, Mark

1997-01-01

Provides guidelines for buying computers for parents of gifted children. Steps for making decisions include deciding who will use the computer, deciding its purposes and what software packages will be used, determining current and future needs, setting a budget, and reviewing needs with salespersons and school-based technology specialists. (CR)

Software For Clear-Air Doppler-Radar Display

NASA Technical Reports Server (NTRS)

Johnston, Bruce W.

1990-01-01

System of software developed to present plan-position-indicator scans of clear-air Doppler radar station on color graphical cathode-ray-tube display. Designed to incorporate latest accepted standards for equipment, computer programs, and meteorological data bases. Includes use of Ada programming language, of "Graphical-Kernel-System-like" graphics interface, and of Common Doppler Radar Exchange Format. Features include portability and maintainability. Use of Ada software packages produced number of software modules reused on other related projects.

Development of the disable software reporting system on the basis of the neural network

NASA Astrophysics Data System (ADS)

Gavrylenko, S.; Babenko, O.; Ignatova, E.

2018-04-01

The PE structure of malicious and secure software is analyzed, features are highlighted, binary sign vectors are obtained and used as inputs for training the neural network. A software model for detecting malware based on the ART-1 neural network was developed, optimal similarity coefficients were found, and testing was performed. The obtained research results showed the possibility of using the developed system of identifying malicious software in computer systems protection systems

Integrated computer-aided design using minicomputers

NASA Technical Reports Server (NTRS)

Storaasli, O. O.

1980-01-01

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

Exploring the Process of Adult Computer Software Training Using Andragogy, Situated Cognition, and a Minimalist Approach

ERIC Educational Resources Information Center

Hurt, Andrew C.

2007-01-01

With technology advances, computer software becomes increasingly difficult to learn. Adults often rely on software training to keep abreast of these changes. Instructor-led software training is frequently used to teach adults new software skills; however there is limited research regarding the best practices in adult computer software training.…

DVS-SOFTWARE: An Effective Tool for Applying Highly Parallelized Hardware To Computational Geophysics

NASA Astrophysics Data System (ADS)

Herrera, I.; Herrera, G. S.

2015-12-01

Most geophysical systems are macroscopic physical systems. The behavior prediction of such systems is carried out by means of computational models whose basic models are partial differential equations (PDEs) [1]. Due to the enormous size of the discretized version of such PDEs it is necessary to apply highly parallelized super-computers. For them, at present, the most efficient software is based on non-overlapping domain decomposition methods (DDM). However, a limiting feature of the present state-of-the-art techniques is due to the kind of discretizations used in them. Recently, I. Herrera and co-workers using 'non-overlapping discretizations' have produced the DVS-Software which overcomes this limitation [2]. The DVS-software can be applied to a great variety of geophysical problems and achieves very high parallel efficiencies (90%, or so [3]). It is therefore very suitable for effectively applying the most advanced parallel supercomputers available at present. In a parallel talk, in this AGU Fall Meeting, Graciela Herrera Z. will present how this software is being applied to advance MOD-FLOW. Key Words: Parallel Software for Geophysics, High Performance Computing, HPC, Parallel Computing, Domain Decomposition Methods (DDM)REFERENCES [1]. Herrera Ismael and George F. Pinder, Mathematical Modelling in Science and Engineering: An axiomatic approach", John Wiley, 243p., 2012. [2]. Herrera, I., de la Cruz L.M. and Rosas-Medina A. "Non Overlapping Discretization Methods for Partial, Differential Equations". NUMER METH PART D E, 30: 1427-1454, 2014, DOI 10.1002/num 21852. (Open source) [3]. Herrera, I., & Contreras Iván "An Innovative Tool for Effectively Applying Highly Parallelized Software To Problems of Elasticity". Geofísica Internacional, 2015 (In press)

Computer Center. Interactive Biology with Videodisc.

ERIC Educational Resources Information Center

Kramer, David W.

1991-01-01

Ways in which students are allowed to choose, based on their curiosity at the moment, which way they will move through a lesson are described. Available software for interactive biology programs and available authoring software for developing interactive programs by teachers and students are listed. (KR)

Student Development of Educational Software: Spin-Offs from Classroom Use of DIAS.

ERIC Educational Resources Information Center

Harrington, John A., Jr.; And Others

1988-01-01

Describes several college courses which encourage students to develop computer software programs in the areas of remote sensing and geographic information systems. A microcomputer-based tutorial package, the Digital Image Analysis System (DAIS), teaches the principles of digital processing. (LS)

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2013 CFR

2013-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2014 CFR

2014-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

75 FR 6185 - Information Collection Requirement; Defense Federal Acquisition Regulation Supplement; Rights in...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

...; Defense Federal Acquisition Regulation Supplement; Rights in Technical Data and Computer Software (OMB... 227.72, Rights in Computer Software and Computer Software Documentation, and related provisions and... rights in technical data and computer software. DoD needs this information to implement 10 U.S.C. 2320...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2011 CFR

2011-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2012 CFR

2012-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2010 CFR

2010-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

78 FR 30898 - Information Collection Requirement; Defense Federal Acquisition Regulation Supplement; Rights in...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

... Data and Computer Software AGENCY: Defense Acquisition Regulations System; Department of Defense (DoD... in Technical Data, and Subpart 227.72, Rights in Computer Software and Computer Software... are associated with rights in technical data and computer software. DoD needs this information to...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

[Apple-Macintosh compatible software for documentation, management and evaluation of ultrasound findings in obstetrics].

PubMed

Kurmanavicius, J; Huch, R; Huch, A

1993-02-01

The advantage of using a computer to automate routine calculations and print out charts of the obstetrical ultrasound examination is obvious. This report describes a software designed to simplify the documentation and analysis of ultrasound data in obstetrics. The system is easy to use, even for persons with little computer knowledge. The programme was written in FoxBase+/Mac (Fox Software, Inc., USA). FoxBase+/Mac takes full advantage of the easy-to-learn, easy-to-use Macintosh interface and is also very fast. Another advantage of this software is that it can be used in teaching. Non-experienced examinators can double-check the correctness of their scanning planes by observing the ultrasound pictures with the markers indicating the right measurement sites and the lists of standard values of biometrical parameters for the corresponding gestational age on the screen. In routine obstetrical ultrasound examinations it takes less than 5 min to enter the foetal biometry data and print out reports. These reports are informative and easy to interpret.

A Tutorial for SPSS/PC+ Studentware. Study Guide for the Doctor of Arts in Computer-Based Learning.

ERIC Educational Resources Information Center

MacFarland, Thomas W.; Hou, Cheng-I

The purpose of this tutorial is to provide the basic information needed for success with SPSS/PC+ Studentware, a student version of the statistical analysis software offered by SPSS, Inc., for the IBM PC+ and compatible computers. It is intended as a convenient summary of how to organize and conduct the most common computer-based statistical…

SU-F-I-43: A Software-Based Statistical Method to Compute Low Contrast Detectability in Computed Tomography Images

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chacko, M; Aldoohan, S

Purpose: The low contrast detectability (LCD) of a CT scanner is its ability to detect and display faint lesions. The current approach to quantify LCD is achieved using vendor-specific methods and phantoms, typically by subjectively observing the smallest size object at a contrast level above phantom background. However, this approach does not yield clinically applicable values for LCD. The current study proposes a statistical LCD metric using software tools to not only to assess scanner performance, but also to quantify the key factors affecting LCD. This approach was developed using uniform QC phantoms, and its applicability was then extended undermore » simulated clinical conditions. Methods: MATLAB software was developed to compute LCD using a uniform image of a QC phantom. For a given virtual object size, the software randomly samples the image within a selected area, and uses statistical analysis based on Student’s t-distribution to compute the LCD as the minimal Hounsfield Unit’s that can be distinguished from the background at the 95% confidence level. Its validity was assessed by comparison with the behavior of a known QC phantom under various scan protocols and a tissue-mimicking phantom. The contributions of beam quality and scattered radiation upon the computed LCD were quantified by using various external beam-hardening filters and phantom lengths. Results: As expected, the LCD was inversely related to object size under all scan conditions. The type of image reconstruction kernel filter and tissue/organ type strongly influenced the background noise characteristics and therefore, the computed LCD for the associated image. Conclusion: The proposed metric and its associated software tools are vendor-independent and can be used to analyze any LCD scanner performance. Furthermore, the method employed can be used in conjunction with the relationships established in this study between LCD and tissue type to extend these concepts to patients’ clinical CT images.« less

The Social Context of Using Computers in Schools: It's Not Just a Matter of Good Software.

ERIC Educational Resources Information Center

Becker, Henry Jay

If computers were used ideally in education, each student would have enough computer time, each computer enough student time, and computer-based activities would be chosen well. The move towards using microcomputers in the schools has less to do with any clear and demonstrable instructional advantage of using them, and more to do with general…

The effects of computer-aided design software on engineering students' spatial visualisation skills

NASA Astrophysics Data System (ADS)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

A component-based software environment for visualizing large macromolecular assemblies.

PubMed

Sanner, Michel F

2005-03-01

The interactive visualization of large biological assemblies poses a number of challenging problems, including the development of multiresolution representations and new interaction methods for navigating and analyzing these complex systems. An additional challenge is the development of flexible software environments that will facilitate the integration and interoperation of computational models and techniques from a wide variety of scientific disciplines. In this paper, we present a component-based software development strategy centered on the high-level, object-oriented, interpretive programming language: Python. We present several software components, discuss their integration, and describe some of their features that are relevant to the visualization of large molecular assemblies. Several examples are given to illustrate the interoperation of these software components and the integration of structural data from a variety of experimental sources. These examples illustrate how combining visual programming with component-based software development facilitates the rapid prototyping of novel visualization tools.

VirtualDose: a software for reporting organ doses from CT for adult and pediatric patients.

PubMed

Ding, Aiping; Gao, Yiming; Liu, Haikuan; Caracappa, Peter F; Long, Daniel J; Bolch, Wesley E; Liu, Bob; Xu, X George

2015-07-21

This paper describes the development and testing of VirtualDose--a software for reporting organ doses for adult and pediatric patients who undergo x-ray computed tomography (CT) examinations. The software is based on a comprehensive database of organ doses derived from Monte Carlo (MC) simulations involving a library of 25 anatomically realistic phantoms that represent patients of different ages, body sizes, body masses, and pregnant stages. Models of GE Lightspeed Pro 16 and Siemens SOMATOM Sensation 16 scanners were carefully validated for use in MC dose calculations. The software framework is designed with the 'software as a service (SaaS)' delivery concept under which multiple clients can access the web-based interface simultaneously from any computer without having to install software locally. The RESTful web service API also allows a third-party picture archiving and communication system software package to seamlessly integrate with VirtualDose's functions. Software testing showed that VirtualDose was compatible with numerous operating systems including Windows, Linux, Apple OS X, and mobile and portable devices. The organ doses from VirtualDose were compared against those reported by CT-Expo and ImPACT-two dosimetry tools that were based on the stylized pediatric and adult patient models that were known to be anatomically simple. The organ doses reported by VirtualDose differed from those reported by CT-Expo and ImPACT by as much as 300% in some of the patient models. These results confirm the conclusion from past studies that differences in anatomical realism offered by stylized and voxel phantoms have caused significant discrepancies in CT dose estimations.

S-Cube: Enabling the Next Generation of Software Services

NASA Astrophysics Data System (ADS)

Metzger, Andreas; Pohl, Klaus

The Service Oriented Architecture (SOA) paradigm is increasingly adopted by industry for building distributed software systems. However, when designing, developing and operating innovative software services and servicebased systems, several challenges exist. Those challenges include how to manage the complexity of those systems, how to establish, monitor and enforce Quality of Service (QoS) and Service Level Agreements (SLAs), as well as how to build those systems such that they can proactively adapt to dynamically changing requirements and context conditions. Developing foundational solutions for those challenges requires joint efforts of different research communities such as Business Process Management, Grid Computing, Service Oriented Computing and Software Engineering. This paper provides an overview of S-Cube, the European Network of Excellence on Software Services and Systems. S-Cube brings together researchers from leading research institutions across Europe, who join their competences to develop foundations, theories as well as methods and tools for future service-based systems.

RELAP-7 Software Verification and Validation Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L.; Choi, Yong-Joon; Zou, Ling

This INL plan comprehensively describes the software for RELAP-7 and documents the software, interface, and software design requirements for the application. The plan also describes the testing-based software verification and validation (SV&V) process—a set of specially designed software models used to test RELAP-7. The RELAP-7 (Reactor Excursion and Leak Analysis Program) code is a nuclear reactor system safety analysis code being developed at Idaho National Laboratory (INL). The code is based on the INL’s modern scientific software development framework – MOOSE (Multi-Physics Object-Oriented Simulation Environment). The overall design goal of RELAP-7 is to take advantage of the previous thirty yearsmore » of advancements in computer architecture, software design, numerical integration methods, and physical models. The end result will be a reactor systems analysis capability that retains and improves upon RELAP5’s capability and extends the analysis capability for all reactor system simulation scenarios.« less

Software Management for the NOνAExperiment

NASA Astrophysics Data System (ADS)

Davies, G. S.; Davies, J. P.; C Group; Rebel, B.; Sachdev, K.; Zirnstein, J.

2015-12-01

The NOvAsoftware (NOνASoft) is written in C++, and built on the Fermilab Computing Division's art framework that uses ROOT analysis software. NOνASoftmakes use of more than 50 external software packages, is developed by more than 50 developers and is used by more than 100 physicists from over 30 universities and laboratories in 3 continents. The software builds are handled by Fermilab's custom version of Software Release Tools (SRT), a UNIX based software management system for large, collaborative projects that is used by several experiments at Fermilab. The system provides software version control with SVN configured in a client-server mode and is based on the code originally developed by the BaBar collaboration. In this paper, we present efforts towards distributing the NOvA software via the CernVM File System distributed file system. We will also describe our recent work to use a CMake build system and Jenkins, the open source continuous integration system, for NOνASoft.

Parallel Fortran-MPI software for numerical inversion of the Laplace transform and its application to oscillatory water levels in groundwater environments

USGS Publications Warehouse

Zhan, X.

2005-01-01

A parallel Fortran-MPI (Message Passing Interface) software for numerical inversion of the Laplace transform based on a Fourier series method is developed to meet the need of solving intensive computational problems involving oscillatory water level's response to hydraulic tests in a groundwater environment. The software is a parallel version of ACM (The Association for Computing Machinery) Transactions on Mathematical Software (TOMS) Algorithm 796. Running 38 test examples indicated that implementation of MPI techniques with distributed memory architecture speedups the processing and improves the efficiency. Applications to oscillatory water levels in a well during aquifer tests are presented to illustrate how this package can be applied to solve complicated environmental problems involved in differential and integral equations. The package is free and is easy to use for people with little or no previous experience in using MPI but who wish to get off to a quick start in parallel computing. ?? 2004 Elsevier Ltd. All rights reserved.

Automated Software Acceleration in Programmable Logic for an Efficient NFFT Algorithm Implementation: A Case Study.

PubMed

Rodríguez, Manuel; Magdaleno, Eduardo; Pérez, Fernando; García, Cristhian

2017-03-28

Non-equispaced Fast Fourier transform (NFFT) is a very important algorithm in several technological and scientific areas such as synthetic aperture radar, computational photography, medical imaging, telecommunications, seismic analysis and so on. However, its computation complexity is high. In this paper, we describe an efficient NFFT implementation with a hardware coprocessor using an All-Programmable System-on-Chip (APSoC). This is a hybrid device that employs an Advanced RISC Machine (ARM) as Processing System with Programmable Logic for high-performance digital signal processing through parallelism and pipeline techniques. The algorithm has been coded in C language with pragma directives to optimize the architecture of the system. We have used the very novel Software Develop System-on-Chip (SDSoC) evelopment tool that simplifies the interface and partitioning between hardware and software. This provides shorter development cycles and iterative improvements by exploring several architectures of the global system. The computational results shows that hardware acceleration significantly outperformed the software based implementation.

Automated Software Acceleration in Programmable Logic for an Efficient NFFT Algorithm Implementation: A Case Study

PubMed Central

Rodríguez, Manuel; Magdaleno, Eduardo; Pérez, Fernando; García, Cristhian

2017-01-01

Non-equispaced Fast Fourier transform (NFFT) is a very important algorithm in several technological and scientific areas such as synthetic aperture radar, computational photography, medical imaging, telecommunications, seismic analysis and so on. However, its computation complexity is high. In this paper, we describe an efficient NFFT implementation with a hardware coprocessor using an All-Programmable System-on-Chip (APSoC). This is a hybrid device that employs an Advanced RISC Machine (ARM) as Processing System with Programmable Logic for high-performance digital signal processing through parallelism and pipeline techniques. The algorithm has been coded in C language with pragma directives to optimize the architecture of the system. We have used the very novel Software Develop System-on-Chip (SDSoC) evelopment tool that simplifies the interface and partitioning between hardware and software. This provides shorter development cycles and iterative improvements by exploring several architectures of the global system. The computational results shows that hardware acceleration significantly outperformed the software based implementation. PMID:28350358

Transient Faults in Computer Systems

NASA Technical Reports Server (NTRS)

Masson, Gerald M.

1993-01-01

A powerful technique particularly appropriate for the detection of errors caused by transient faults in computer systems was developed. The technique can be implemented in either software or hardware; the research conducted thus far primarily considered software implementations. The error detection technique developed has the distinct advantage of having provably complete coverage of all errors caused by transient faults that affect the output produced by the execution of a program. In other words, the technique does not have to be tuned to a particular error model to enhance error coverage. Also, the correctness of the technique can be formally verified. The technique uses time and software redundancy. The foundation for an effective, low-overhead, software-based certification trail approach to real-time error detection resulting from transient fault phenomena was developed.

[Stressor and stress reduction strategies for computer software engineers].

PubMed

Asakura, Takashi

2002-07-01

First, in this article we discuss 10 significant occupational stressors for computer software engineers, based on the review of the scientific literature on their stress and mental health. The stressors include 1) quantitative work overload, 2) time pressure, 3) qualitative work load, 4) speed and diffusion of technological innovation, and technological divergence, 5) low discretional power, 6) underdeveloped career pattern, 7) low earnings/reward from jobs, 8) difficulties in managing a project team for software development and establishing support system, 9) difficulties in customer relations, and 10) personality characteristics. In addition, we delineate their working and organizational conditions that cause such occupational stressors in order to find strategies to reduce those stressors in their workplaces. Finally, we suggest three stressor and stress reduction strategies for software engineers.

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2011 CFR

2011-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2010 CFR

2010-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2013 CFR

2013-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2012 CFR

2012-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

The Perfect Neuroimaging-Genetics-Computation Storm: Collision of Petabytes of Data, Millions of Hardware Devices and Thousands of Software Tools

PubMed Central

Dinov, Ivo D.; Petrosyan, Petros; Liu, Zhizhong; Eggert, Paul; Zamanyan, Alen; Torri, Federica; Macciardi, Fabio; Hobel, Sam; Moon, Seok Woo; Sung, Young Hee; Jiang, Zhiguo; Labus, Jennifer; Kurth, Florian; Ashe-McNalley, Cody; Mayer, Emeran; Vespa, Paul M.; Van Horn, John D.; Toga, Arthur W.

2013-01-01

The volume, diversity and velocity of biomedical data are exponentially increasing providing petabytes of new neuroimaging and genetics data every year. At the same time, tens-of-thousands of computational algorithms are developed and reported in the literature along with thousands of software tools and services. Users demand intuitive, quick and platform-agnostic access to data, software tools, and infrastructure from millions of hardware devices. This explosion of information, scientific techniques, computational models, and technological advances leads to enormous challenges in data analysis, evidence-based biomedical inference and reproducibility of findings. The Pipeline workflow environment provides a crowd-based distributed solution for consistent management of these heterogeneous resources. The Pipeline allows multiple (local) clients and (remote) servers to connect, exchange protocols, control the execution, monitor the states of different tools or hardware, and share complete protocols as portable XML workflows. In this paper, we demonstrate several advanced computational neuroimaging and genetics case-studies, and end-to-end pipeline solutions. These are implemented as graphical workflow protocols in the context of analyzing imaging (sMRI, fMRI, DTI), phenotypic (demographic, clinical), and genetic (SNP) data. PMID:23975276

Computer Applications in Instruction: A Teacher's Guide to Selection and Use.

ERIC Educational Resources Information Center

Edwards, Judith B.; And Others

Intended for upper elementary and secondary teachers in all subject areas, this guide provides practical advice on determining the appropriate application of computer technology and on the selection of specific, subject-related computer-based instruction units. Under the heading of hardware and software, topics discussed include communicating with…

76 FR 61717 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... computer science based technology that may provide the capability of detecting untoward events such as... is comprised of a dedicated computer server that executes specially designed software with input data... computer assisted clinical ordering. J Biomed Inform. 2003 Feb-Apr;36(1-2):4-22. [PMID 14552843...

Design and Implementation of a Relational Database Management System for the AFIT Thesis Process.

DTIC Science & Technology

1985-09-01

AIRLIFT Gourdin 4. APPLIED MATHEMATICS Daneman Lee Na rga rsen ker 5. ARTIFICIAL INTELLEGENCE Gen et 6. CAPARILITY ASSESSMENT S Budde Talbott 31...05 ARTIFICIAL INTELLIGENCE 06 CAPABILITY ASSESSMENT 07 COMMUNIICATIONS 08 COMPUTER AIDED DESIGN 09 COMPUTER BASED TRAINING 10 COMPUTER SOFTWARE 11

Modeling Mendel's Laws on Inheritance in Computational Biology and Medical Sciences

ERIC Educational Resources Information Center

Singh, Gurmukh; Siddiqui, Khalid; Singh, Mankiran; Singh, Satpal

2011-01-01

The current research article is based on a simple and practical way of employing the computational power of widely available, versatile software MS Excel 2007 to perform interactive computer simulations for undergraduate/graduate students in biology, biochemistry, biophysics, microbiology, medicine in college and university classroom setting. To…

78 FR 47804 - Verification, Validation, Reviews, and Audits for Digital Computer Software Used in Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-06

..., ``Configuration Management Plans for Digital Computer Software used in Safety Systems of Nuclear Power Plants... Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory..., Reviews, and Audits for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.'' This...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

48 CFR 252.227-7026 - Deferred delivery of technical data or computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data or computer software. 252.227-7026 Section 252.227-7026 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(a), use the following clause: Deferred Delivery of Technical Data or Computer Software (APR 1988) The Government shall have the right to require, at...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

48 CFR 52.227-15 - Representation of Limited Rights Data and Restricted Computer Software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Rights Data and Restricted Computer Software. 52.227-15 Section 52.227-15 Federal Acquisition Regulations... Computer Software. As prescribed in 27.409(c), insert the following provision: Representation of Limited Rights Data and Restricted Computer Software (DEC 2007) (a) This solicitation sets forth the Government's...

48 CFR 252.227-7025 - Limitations on the use or disclosure of government-furnished information marked with restrictive...

Code of Federal Regulations, 2011 CFR

2011-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...