Features of Computer-Based Decision Aids: Systematic Review, Thematic Synthesis, and Meta-Analyses

PubMed Central

Krömker, Dörthe; Meguerditchian, Ari N; Tamblyn, Robyn

2016-01-01

Background Patient information and education, such as decision aids, are gradually moving toward online, computer-based environments. Considerable research has been conducted to guide content and presentation of decision aids. However, given the relatively new shift to computer-based support, little attention has been given to how multimedia and interactivity can improve upon paper-based decision aids. Objective The first objective of this review was to summarize published literature into a proposed classification of features that have been integrated into computer-based decision aids. Building on this classification, the second objective was to assess whether integration of specific features was associated with higher-quality decision making. Methods Relevant studies were located by searching MEDLINE, Embase, CINAHL, and CENTRAL databases. The review identified studies that evaluated computer-based decision aids for adults faced with preference-sensitive medical decisions and reported quality of decision-making outcomes. A thematic synthesis was conducted to develop the classification of features. Subsequently, meta-analyses were conducted based on standardized mean differences (SMD) from randomized controlled trials (RCTs) that reported knowledge or decisional conflict. Further subgroup analyses compared pooled SMDs for decision aids that incorporated a specific feature to other computer-based decision aids that did not incorporate the feature, to assess whether specific features improved quality of decision making. Results Of 3541 unique publications, 58 studies met the target criteria and were included in the thematic synthesis. The synthesis identified six features: content control, tailoring, patient narratives, explicit values clarification, feedback, and social support. A subset of 26 RCTs from the thematic synthesis was used to conduct the meta-analyses. As expected, computer-based decision aids performed better than usual care or alternative aids; however, some features performed better than others. Integration of content control improved quality of decision making (SMD 0.59 vs 0.23 for knowledge; SMD 0.39 vs 0.29 for decisional conflict). In contrast, tailoring reduced quality of decision making (SMD 0.40 vs 0.71 for knowledge; SMD 0.25 vs 0.52 for decisional conflict). Similarly, patient narratives also reduced quality of decision making (SMD 0.43 vs 0.65 for knowledge; SMD 0.17 vs 0.46 for decisional conflict). Results were varied for different types of explicit values clarification, feedback, and social support. Conclusions Integration of media rich or interactive features into computer-based decision aids can improve quality of preference-sensitive decision making. However, this is an emerging field with limited evidence to guide use. The systematic review and thematic synthesis identified features that have been integrated into available computer-based decision aids, in an effort to facilitate reporting of these features and to promote integration of such features into decision aids. The meta-analyses and associated subgroup analyses provide preliminary evidence to support integration of specific features into future decision aids. Further research can focus on clarifying independent contributions of specific features through experimental designs and refining the designs of features to improve effectiveness. PMID:26813512

COMPUTER SUPPORT SYSTEMS FOR ESTIMATING CHEMICAL TOXICITY: PRESENT CAPABILITIES AND FUTURE TRENDS

EPA Science Inventory

Computer Support Systems for Estimating Chemical Toxicity: Present Capabilities and Future Trends

A wide variety of computer-based artificial intelligence (AI) and decision support systems exist currently to aid in the assessment of toxicity for environmental chemicals. T...

Monitoring and decision making by people in man machine systems

NASA Technical Reports Server (NTRS)

Johannsen, G.

1979-01-01

The analysis of human monitoring and decision making behavior as well as its modeling are described. Classic and optimal control theoretical, monitoring models are surveyed. The relationship between attention allocation and eye movements is discussed. As an example of applications, the evaluation of predictor displays by means of the optimal control model is explained. Fault detection involving continuous signals and decision making behavior of a human operator engaged in fault diagnosis during different operation and maintenance situations are illustrated. Computer aided decision making is considered as a queueing problem. It is shown to what extent computer aids can be based on the state of human activity as measured by psychophysiological quantities. Finally, management information systems for different application areas are mentioned. The possibilities of mathematical modeling of human behavior in complex man machine systems are also critically assessed.

Pilot interaction with automated airborne decision making systems

NASA Technical Reports Server (NTRS)

Hammer, John M.

1990-01-01

Ways in which computers can aid the decision making of an human operator of an aerospace system are investigated. The approach taken is to aid rather than replace the human operator, because operational experience has shown that humans can enhance the effectiveness of systems. As systems become more automated, the role of the operator has shifted to that of a manager and problem solver. This shift has created the research area of how to aid the human in this role. Published research in four areas is described. A discussion is presented of the DC-8 flight simulator at Georgia Tech.

FORBEEF: A Forage-Livestock System Computer Model Used as a Teaching Aid for Decision Making.

ERIC Educational Resources Information Center

Stringer, W. C.; And Others

1987-01-01

Describes the development of a computer simulation model of forage-beef production systems, which is intended to incorporate soil, forage, and animal decisions into an enterprise scenario. Produces a summary of forage production and livestock needs. Cites positive assessment of the program's value by participants in inservice training workshops.…

Adaptive Decision Aiding in Computer-Assisted Instruction: Adaptive Computerized Training System (ACTS).

ERIC Educational Resources Information Center

Hopf-Weichel, Rosemarie; And Others

This report describes results of the first year of a three-year program to develop and evaluate a new Adaptive Computerized Training System (ACTS) for electronics maintenance training. (ACTS incorporates an adaptive computer program that learns the student's diagnostic and decision value structure, compares it to that of an expert, and adapts the…

Expert Systems: Tutors, Tools, and Tutees.

ERIC Educational Resources Information Center

Lippert, Renate C.

1989-01-01

Discusses the current status, research, and practical implications of artificial intelligence and expert systems in education. Topics discussed include computer-assisted instruction; intelligent computer-assisted instruction; intelligent tutoring systems; instructional strategies involving the creation of knowledge bases; decision aids;…

Automatic system for computer program documentation

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Elliott, R. W.; Arseven, S.; Colunga, D.

1972-01-01

Work done on a project to design an automatic system for computer program documentation aids was made to determine what existing programs could be used effectively to document computer programs. Results of the study are included in the form of an extensive bibliography and working papers on appropriate operating systems, text editors, program editors, data structures, standards, decision tables, flowchart systems, and proprietary documentation aids. The preliminary design for an automated documentation system is also included. An actual program has been documented in detail to demonstrate the types of output that can be produced by the proposed system.

Intelligent instrumentation applied in environment management

NASA Astrophysics Data System (ADS)

Magheti, Mihnea I.; Walsh, Patrick; Delassus, Patrick

2005-06-01

The use of information and communications technology in environment management and research has witnessed a renaissance in recent years. From optical sensor technology, expert systems, GIS and communications technologies to computer aided harvesting and yield prediction, these systems are increasable used for applications developing in the management sector of natural resources and biodiversity. This paper presents an environmental decision support system, used to monitor biodiversity and present a risk rating for the invasion of pests into the particular systems being examined. This system will utilise expert mobile technology coupled with artificial intelligence and predictive modelling, and will emphasize the potential for expansion into many areas of intelligent remote sensing and computer aided decision-making for environment management or certification. Monitoring and prediction in natural systems, harnessing the potential of computing and communication technologies is an emerging technology within the area of environmental management. This research will lead to the initiation of a hardware and software multi tier decision support system for environment management allowing an evaluation of areas for biodiversity or areas at risk from invasive species, based upon environmental factors/systems.

Exploring Effective Decision Making through Human-Centered and Computational Intelligence Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Kyungsik; Cook, Kristin A.; Shih, Patrick C.

Decision-making has long been studied to understand a psychological, cognitive, and social process of selecting an effective choice from alternative options. Its studies have been extended from a personal level to a group and collaborative level, and many computer-aided decision-making systems have been developed to help people make right decisions. There has been significant research growth in computational aspects of decision-making systems, yet comparatively little effort has existed in identifying and articulating user needs and requirements in assessing system outputs and the extent to which human judgments could be utilized for making accurate and reliable decisions. Our research focus ismore » decision-making through human-centered and computational intelligence methods in a collaborative environment, and the objectives of this position paper are to bring our research ideas to the workshop, and share and discuss ideas.« less

Computer-aided detection systems to improve lung cancer early diagnosis: state-of-the-art and challenges

NASA Astrophysics Data System (ADS)

Traverso, A.; Lopez Torres, E.; Fantacci, M. E.; Cerello, P.

2017-05-01

Lung cancer is one of the most lethal types of cancer, because its early diagnosis is not good enough. In fact, the detection of pulmonary nodule, potential lung cancers, in Computed Tomography scans is a very challenging and time-consuming task for radiologists. To support radiologists, researchers have developed Computer-Aided Diagnosis (CAD) systems for the automated detection of pulmonary nodules in chest Computed Tomography scans. Despite the high level of technological developments and the proved benefits on the overall detection performance, the usage of Computer-Aided Diagnosis in clinical practice is far from being a common procedure. In this paper we investigate the causes underlying this discrepancy and present a solution to tackle it: the M5L WEB- and Cloud-based on-demand Computer-Aided Diagnosis. In addition, we prove how the combination of traditional imaging processing techniques with state-of-art advanced classification algorithms allows to build a system whose performance could be much larger than any Computer-Aided Diagnosis developed so far. This outcome opens the possibility to use the CAD as clinical decision support for radiologists.

Transit operations decision support systems (TODSS) : core functional requirements for identification of service disruptions and provision of service restoration options 1.0

DOT National Transportation Integrated Search

2004-03-15

The Transit Operations Decision Support System (TODSS) Project was initiated to address concerns raised by transit agencies that have implemented and are using Automated Vehicle Location (AVL) and Computer Aided Dispatch Systems (CAD). This document ...

Facilitating Integration of Electron Beam Lithography Devices with Interactive Videodisc, Computer-Based Simulation and Job Aids.

ERIC Educational Resources Information Center

Von Der Linn, Robert Christopher

A needs assessment of the Grumman E-Beam Systems Group identified the requirement for additional skill mastery for the engineers who assemble, integrate, and maintain devices used to manufacture integrated circuits. Further analysis of the tasks involved led to the decision to develop interactive videodisc, computer-based job aids to enable…

Teaching Advance Care Planning to Medical Students with a Computer-Based Decision Aid

PubMed Central

Levi, Benjamin H.

2013-01-01

Discussing end-of-life decisions with cancer patients is a crucial skill for physicians. This article reports findings from a pilot study evaluating the effectiveness of a computer-based decision aid for teaching medical students about advance care planning. Second-year medical students at a single medical school were randomized to use a standard advance directive or a computer-based decision aid to help patients with advance care planning. Students' knowledge, skills, and satisfaction were measured by self-report; their performance was rated by patients. 121/133 (91%) of students participated. The Decision-Aid Group (n=60) outperformed the Standard Group (n=61) in terms of students´ knowledge (p<0.01), confidence in helping patients with advance care planning (p<0.01), knowledge of what matters to patients (p=0.05), and satisfaction with their learning experience (p<0.01). Likewise, patients in the Decision Aid Group were more satisfied with the advance care planning method (p<0.01) and with several aspects of student performance. Use of a computer-based decision aid may be an effective way to teach medical students how to discuss advance care planning with cancer patients. PMID:20632222

Computer-aided decision making.

Treesearch

Keith M. Reynolds; Daniel L. Schmoldt

2006-01-01

Several major classes of software technologies have been used in decisionmaking for forest management applications over the past few decades. These computer-based technologies include mathematical programming, expert systems, network models, multi-criteria decisionmaking, and integrated systems. Each technology possesses unique advantages and disadvantages, and has...

Information Systems for NASA's Aeronautics and Space Enterprises

NASA Technical Reports Server (NTRS)

Kutler, Paul

1998-01-01

The aerospace industry is being challenged to reduce costs and development time as well as utilize new technologies to improve product performance. Information technology (IT) is the key to providing revolutionary solutions to the challenges posed by the increasing complexity of NASA's aeronautics and space missions and the sophisticated nature of the systems that enable them. The NASA Ames vision is to develop technologies enabling the information age, expanding the frontiers of knowledge for aeronautics and space, improving America's competitive position, and inspiring future generations. Ames' missions to accomplish that vision include: 1) performing research to support the American aviation community through the unique integration of computation, experimentation, simulation and flight testing, 2) studying the health of our planet, understanding living systems in space and the origins of the universe, developing technologies for space flight, and 3) to research, develop and deliver information technologies and applications. Information technology may be defined as the use of advance computing systems to generate data, analyze data, transform data into knowledge and to use as an aid in the decision-making process. The knowledge from transformed data can be displayed in visual, virtual and multimedia environments. The decision-making process can be fully autonomous or aided by a cognitive processes, i.e., computational aids designed to leverage human capacities. IT Systems can learn as they go, developing the capability to make decisions or aid the decision making process on the basis of experiences gained using limited data inputs. In the future, information systems will be used to aid space mission synthesis, virtual aerospace system design, aid damaged aircraft during landing, perform robotic surgery, and monitor the health and status of spacecraft and planetary probes. NASA Ames through the Center of Excellence for Information Technology Office is leading the effort in pursuit of revolutionary, IT-based approaches to satisfying NASA's aeronautics and space requirements. The objective of the effort is to incorporate information technologies within each of the Agency's four Enterprises, i.e., Aeronautics and Space Transportation Technology, Earth, Science, Human Exploration and Development of Space and Space Sciences. The end results of these efforts for Enterprise programs and projects should be reduced cost, enhanced mission capability and expedited mission completion.

SIGI: An Interactive Aid to Career Decision Making.

ERIC Educational Resources Information Center

Katz, Martin R.

1980-01-01

The System of Interactive Guidance and Information (SIGI) helps students make informed and rational career decisions. Interacting with a computer, students examine values, identify and explore options, gain and interpret relevant information, master strategies for decision making, and formulate plans of action. Extensively field-tested, SIGI has…

Group Decision Support System to Aid the Process of Design and Maintenance of Large Scale Systems

DTIC Science & Technology

1992-03-23

from a fuzzy set of user requirements. The overall objective of the project is to develop a system combining the characteristics of a compact computer... AHP ) for hierarchical prioritization. 4) Individual Evaluation and Selection of Alternatives - Allows the decision maker to individually evaluate...its concept of outranking relations. The AHP method supports complex decision problems by successively decomposing and synthesizing various elements

Pilot interaction with automated airborne decision making systems

NASA Technical Reports Server (NTRS)

Rouse, W. B.; Chu, Y. Y.; Greenstein, J. S.; Walden, R. S.

1976-01-01

An investigation was made of interaction between a human pilot and automated on-board decision making systems. Research was initiated on the topic of pilot problem solving in automated and semi-automated flight management systems and attempts were made to develop a model of human decision making in a multi-task situation. A study was made of allocation of responsibility between human and computer, and discussed were various pilot performance parameters with varying degrees of automation. Optimal allocation of responsibility between human and computer was considered and some theoretical results found in the literature were presented. The pilot as a problem solver was discussed. Finally the design of displays, controls, procedures, and computer aids for problem solving tasks in automated and semi-automated systems was considered.

Decision tools in health care: focus on the problem, not the solution.

PubMed

Liu, Joseph; Wyatt, Jeremy C; Altman, Douglas G

2006-01-20

Systematic reviews or randomised-controlled trials usually help to establish the effectiveness of drugs and other health technologies, but are rarely sufficient by themselves to ensure actual clinical use of the technology. The process from innovation to routine clinical use is complex. Numerous computerised decision support systems (DSS) have been developed, but many fail to be taken up into actual use. Some developers construct technologically advanced systems with little relevance to the real world. Others did not determine whether a clinical need exists. With NHS investing 5 billion pounds sterling in computer systems, also occurring in other countries, there is an urgent need to shift from a technology-driven approach to one that identifies and employs the most cost-effective method to manage knowledge, regardless of the technology. The generic term, 'decision tool' (DT), is therefore suggested to demonstrate that these aids, which seem different technically, are conceptually the same from a clinical viewpoint. Many computerised DSSs failed for various reasons, for example, they were not based on best available knowledge; there was insufficient emphasis on their need for high quality clinical data; their development was technology-led; or evaluation methods were misapplied. We argue that DSSs and other computer-based, paper-based and even mechanical decision aids are members of a wider family of decision tools. A DT is an active knowledge resource that uses patient data to generate case specific advice, which supports decision making about individual patients by health professionals, the patients themselves or others concerned about them. The identification of DTs as a consistent and important category of health technology should encourage the sharing of lessons between DT developers and users and reduce the frequency of decision tool projects focusing only on technology. The focus of evaluation should become more clinical, with the impact of computer-based DTs being evaluated against other computer, paper- or mechanical tools, to identify the most cost effective tool for each clinical problem. We suggested the generic term 'decision tool' to demonstrate that decision-making aids, such as computerised DSSs, paper algorithms, and reminders are conceptually the same, so the methods to evaluate them should be the same.

Smart Networking Decisions: A Kase Study.

ERIC Educational Resources Information Center

Sturgeon, Julie

1999-01-01

Describes one decision-making approach for quickly implementing a communications network into a school district. The use of volunteer labor for wiring installation, computer selection focusing on standardization to aid in troubleshooting, and an intranet system to achieve efficiency and learning opportunities for teachers and administrative…

Second CLIPS Conference Proceedings, volume 1

NASA Technical Reports Server (NTRS)

Giarratano, Joseph (Editor); Culbert, Christopher J. (Editor)

1991-01-01

Topics covered at the 2nd CLIPS Conference held at the Johnson Space Center, September 23-25, 1991 are given. Topics include rule groupings, fault detection using expert systems, decision making using expert systems, knowledge representation, computer aided design and debugging expert systems.

Application of expert systems in project management decision aiding

NASA Technical Reports Server (NTRS)

Harris, Regina; Shaffer, Steven; Stokes, James; Goldstein, David

1987-01-01

The feasibility of developing an expert systems-based project management decision aid to enhance the performance of NASA project managers was assessed. The research effort included extensive literature reviews in the areas of project management, project management decision aiding, expert systems technology, and human-computer interface engineering. Literature reviews were augmented by focused interviews with NASA managers. Time estimation for project scheduling was identified as the target activity for decision augmentation, and a design was developed for an Integrated NASA System for Intelligent Time Estimation (INSITE). The proposed INSITE design was judged feasible with a low level of risk. A partial proof-of-concept experiment was performed and was successful. Specific conclusions drawn from the research and analyses are included. The INSITE concept is potentially applicable in any management sphere, commercial or government, where time estimation is required for project scheduling. As project scheduling is a nearly universal management activity, the range of possibilities is considerable. The INSITE concept also holds potential for enhancing other management tasks, especially in areas such as cost estimation, where estimation-by-analogy is already a proven method.

The Use of Computer-Aided Decision Support Systems for Complex Source Selection Decisions

DTIC Science & Technology

1989-09-01

unique low noise interferometer developed at Fusetech Inc. by using divided Fabry - Perot fiber optic cells, common- mode rejection, matched path lengths and...potential techniques for a demodulation scheme. They proposed a detailed investigation of the approaches as part of the program. For mine applications

Resource Analysis of Cognitive Process Flow Used to Achieve Autonomy

DTIC Science & Technology

2016-03-01

to be used as a decision - making aid to guide system designers and program managers not necessarily familiar with cognitive pro- cessing, or resource...implementing end-to-end cognitive processing flows multiplies and the impact of these design decisions on efficiency and effectiveness increases [1]. The...end-to-end cognitive systems and alternative computing technologies, then system design and acquisition personnel could make systematic analyses and

Human factors of intelligent computer aided display design

NASA Technical Reports Server (NTRS)

Hunt, R. M.

1985-01-01

Design concepts for a decision support system being studied at NASA Langley as an aid to visual display unit (VDU) designers are described. Ideally, human factors should be taken into account by VDU designers. In reality, although the human factors database on VDUs is small, such systems must be constantly developed. Human factors are therefore a secondary consideration. An expert system will thus serve mainly in an advisory capacity. Functions can include facilitating the design process by shortening the time to generate and alter drawings, enhancing the capability of breaking design requirements down into simpler functions, and providing visual displays equivalent to the final product. The VDU system could also discriminate, and display the difference, between designer decisions and machine inferences. The system could also aid in analyzing the effects of designer choices on future options and in ennunciating when there are data available on a design selections.

Expert systems as applied to bridges and pavements : an overview.

DOT National Transportation Integrated Search

1986-01-01

Expert systems is a rapidly emerging new application of computers to aid decision makers in solving problems. This report gives an overview of what expert systems are and of what use they may be to a transportation department. The focus of the applic...

Trends in Facility Management Technology: The Emergence of the Internet, GIS, and Facility Assessment Decision Support.

ERIC Educational Resources Information Center

Teicholz, Eric

1997-01-01

Reports research on trends in computer-aided facilities management using the Internet and geographic information system (GIS) technology for space utilization research. Proposes that facility assessment software holds promise for supporting facility management decision making, and outlines four areas for its use: inventory; evaluation; reporting;…

A Cross-National CAI Tool To Support Learning Operations Decision-Making and Market Analysis.

ERIC Educational Resources Information Center

Mockler, Robert J.; Afanasiev, Mikhail Y.; Dologite, Dorothy G.

1999-01-01

Describes bicultural (United States and Russia) development of a computer-aided instruction (CAI) tool to learn management decision-making using information systems technologies. The program has been used with undergraduate and graduate students in both countries; it integrates free and controlled market concepts and combines traditional computer…

Evaluation of computer-aided detection and diagnosis systems.

PubMed

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-08-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and "best practices" for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice.

Evaluation of computer-aided detection and diagnosis systemsa)

PubMed Central

Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G.; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T.; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M.; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

2013-01-01

Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and “best practices” for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD in clinical practice. PMID:23927365

Investigating the Heart Pump Implant Decision Process: Opportunities for Decision Support Tools to Help

PubMed Central

Yang, Qian; Zimmerman, John; Steinfeld, Aaron; Carey, Lisa; Antaki, James F.

2016-01-01

Clinical decision support tools (DSTs) are computational systems that aid healthcare decision-making. While effective in labs, almost all these systems failed when they moved into clinical practice. Healthcare researchers speculated it is most likely due to a lack of user-centered HCI considerations in the design of these systems. This paper describes a field study investigating how clinicians make a heart pump implant decision with a focus on how to best integrate an intelligent DST into their work process. Our findings reveal a lack of perceived need for and trust of machine intelligence, as well as many barriers to computer use at the point of clinical decision-making. These findings suggest an alternative perspective to the traditional use models, in which clinicians engage with DSTs at the point of making a decision. We identify situations across patients’ healthcare trajectories when decision supports would help, and we discuss new forms it might take in these situations. PMID:27833397

An evaluation of consensus techniques for diagnostic interpretation

NASA Astrophysics Data System (ADS)

Sauter, Jake N.; LaBarre, Victoria M.; Furst, Jacob D.; Raicu, Daniela S.

2018-02-01

Learning diagnostic labels from image content has been the standard in computer-aided diagnosis. Most computer-aided diagnosis systems use low-level image features extracted directly from image content to train and test machine learning classifiers for diagnostic label prediction. When the ground truth for the diagnostic labels is not available, reference truth is generated from the experts diagnostic interpretations of the image/region of interest. More specifically, when the label is uncertain, e.g. when multiple experts label an image and their interpretations are different, techniques to handle the label variability are necessary. In this paper, we compare three consensus techniques that are typically used to encode the variability in the experts labeling of the medical data: mean, median and mode, and their effects on simple classifiers that can handle deterministic labels (decision trees) and probabilistic vectors of labels (belief decision trees). Given that the NIH/NCI Lung Image Database Consortium (LIDC) data provides interpretations for lung nodules by up to four radiologists, we leverage the LIDC data to evaluate and compare these consensus approaches when creating computer-aided diagnosis systems for lung nodules. First, low-level image features of nodules are extracted and paired with their radiologists semantic ratings (1= most likely benign, , 5 = most likely malignant); second, machine learning multi-class classifiers that handle deterministic labels (decision trees) and probabilistic vectors of labels (belief decision trees) are built to predict the lung nodules semantic ratings. We show that the mean-based consensus generates the most robust classi- fier overall when compared to the median- and mode-based consensus. Lastly, the results of this study show that, when building CAD systems with uncertain diagnostic interpretation, it is important to evaluate different strategies for encoding and predicting the diagnostic label.

[Medical expert systems and clinical needs].

PubMed

Buscher, H P

1991-10-18

The rapid expansion of computer-based systems for problem solving or decision making in medicine, the so-called medical expert systems, emphasize the need for reappraisal of their indication and value. Where specialist knowledge is required, in particular where medical decisions are susceptible to error these systems will probably serve as a valuable support. In the near future computer-based systems should be able to aid the interpretation of findings of technical investigations and the control of treatment, especially where rapid reactions are necessary despite the need of complex analysis of investigated parameters. In the distant future complete support of diagnostic procedures from the history to final diagnosis is possible. It promises to be particularly attractive for the diagnosis of seldom diseases, for difficult differential diagnoses, and in the decision making in the case of expensive, risky or new diagnostic or therapeutic methods. The physician needs to be aware of certain dangers, ranging from misleading information up to abuse. Patient information depends often on subjective reports and error-prone observations. Although basing on problematic knowledge computer-born decisions may have an imperative effect on medical decision making. Also it must be born in mind that medical decisions should always combine the rational with a consideration of human motives.

Dopamine Beta Hydroxylase Genotype Identifies Individuals Less Susceptible to Bias in Computer-Assisted Decision Making

PubMed Central

Parasuraman, Raja; de Visser, Ewart; Lin, Ming-Kuan; Greenwood, Pamela M.

2012-01-01

Computerized aiding systems can assist human decision makers in complex tasks but can impair performance when they provide incorrect advice that humans erroneously follow, a phenomenon known as “automation bias.” The extent to which people exhibit automation bias varies significantly and may reflect inter-individual variation in the capacity of working memory and the efficiency of executive function, both of which are highly heritable and under dopaminergic and noradrenergic control in prefrontal cortex. The dopamine beta hydroxylase (DBH) gene is thought to regulate the differential availability of dopamine and norepinephrine in prefrontal cortex. We therefore examined decision-making performance under imperfect computer aiding in 100 participants performing a simulated command and control task. Based on two single nucleotide polymorphism (SNPs) of the DBH gene, −1041 C/T (rs1611115) and 444 G/A (rs1108580), participants were divided into groups of low and high DBH enzyme activity, where low enzyme activity is associated with greater dopamine relative to norepinephrine levels in cortex. Compared to those in the high DBH enzyme activity group, individuals in the low DBH enzyme activity group were more accurate and speedier in their decisions when incorrect advice was given and verified automation recommendations more frequently. These results indicate that a gene that regulates relative prefrontal cortex dopamine availability, DBH, can identify those individuals who are less susceptible to bias in using computerized decision-aiding systems. PMID:22761865

Decision-aided ICI mitigation with time-domain average approximation in CO-OFDM

NASA Astrophysics Data System (ADS)

Ren, Hongliang; Cai, Jiaxing; Ye, Xin; Lu, Jin; Cao, Quanjun; Guo, Shuqin; Xue, Lin-lin; Qin, Yali; Hu, Weisheng

2015-07-01

We introduce and investigate the feasibility of a novel iterative blind phase noise inter-carrier interference (ICI) mitigation scheme for coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems. The ICI mitigation scheme is performed through the combination of frequency-domain symbol decision-aided estimation and the ICI phase noise time-average approximation. An additional initial decision process with suitable threshold is introduced in order to suppress the decision error symbols. Our proposed ICI mitigation scheme is proved to be effective in removing the ICI for a simulated CO-OFDM with 16-QAM modulation format. With the slightly high computational complexity, it outperforms the time-domain average blind ICI (Avg-BL-ICI) algorithm at a relatively wide laser line-width and high OSNR.

Towards a computer-aided diagnosis system for vocal cord diseases.

PubMed

Verikas, A; Gelzinis, A; Bacauskiene, M; Uloza, V

2006-01-01

The objective of this work is to investigate a possibility of creating a computer-aided decision support system for an automated analysis of vocal cord images aiming to categorize diseases of vocal cords. The problem is treated as a pattern recognition task. To obtain a concise and informative representation of a vocal cord image, colour, texture, and geometrical features are used. The representation is further analyzed by a pattern classifier categorizing the image into healthy, diffuse, and nodular classes. The approach developed was tested on 785 vocal cord images collected at the Department of Otolaryngology, Kaunas University of Medicine, Lithuania. A correct classification rate of over 87% was obtained when categorizing a set of unseen images into the aforementioned three classes. Bearing in mind the high similarity of the decision classes, the results obtained are rather encouraging and the developed tools could be very helpful for assuring objective analysis of the images of laryngeal diseases.

Human Factors in Automated and Robotic Space Systems: Proceedings of a symposium. Part 1

NASA Technical Reports Server (NTRS)

Sheridan, Thomas B. (Editor); Kruser, Dana S. (Editor); Deutsch, Stanley (Editor)

1987-01-01

Human factors research likely to produce results applicable to the development of a NASA space station is discussed. The particular sessions covered in Part 1 include: (1) system productivity -- people and machines; (2) expert systems and their use; (3) language and displays for human-computer communication; and (4) computer aided monitoring and decision making. Papers from each subject area are reproduced and the discussions from each area are summarized.

Loosely Coupled GPS-Aided Inertial Navigation System for Range Safety

NASA Technical Reports Server (NTRS)

Heatwole, Scott; Lanzi, Raymond J.

2010-01-01

The Autonomous Flight Safety System (AFSS) aims to replace the human element of range safety operations, as well as reduce reliance on expensive, downrange assets for launches of expendable launch vehicles (ELVs). The system consists of multiple navigation sensors and flight computers that provide a highly reliable platform. It is designed to ensure that single-event failures in a flight computer or sensor will not bring down the whole system. The flight computer uses a rules-based structure derived from range safety requirements to make decisions whether or not to destroy the rocket.

Economic Comparison of Processes Using Spreadsheet Programs

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Pappano, A. W.; Jennings, C. N.

1986-01-01

Inexpensive approach aids plant-design decisions. Commercially available electronic spreadsheet programs aid economic comparison of different processes for producing particular end products. Facilitates plantdesign decisions without requiring large expenditures for powerful mainframe computers.

Automated lifestyle coaching for cerebro-cardiovascular disease prevention.

PubMed

Spassova, Lübomira; Vittore, Debora; Droste, Dirk; Rösch, Norbert

2013-01-01

As soon as telemedicine aims at supporting the prevention of ischemic events (e.g., stroke and myocardial infarction), the mere monitoring of vital parameters is not sufficient. Instead, the patients should be supported in their efforts to actively reduce their individual risk factors and to achieve and maintain a healthier lifestyle. The Luxembourg-based CAPSYS project (Computer-Aided Prevention System) aims at combining the advantages of telephone coaching with those of home telemonitoring and with methods of computer-aided decision support in direct contact with the patients. The suitability and user acceptance of the system is currently being evaluated in a first pilot study.

Identifying design considerations for a shared decision aid for use at the point of outpatient clinical care: An ethnographic study at an inner city clinic.

PubMed

Hajizadeh, Negin; Perez Figueroa, Rafael E; Uhler, Lauren M; Chiou, Erin; Perchonok, Jennifer E; Montague, Enid

2013-03-06

Computerized decision aids could facilitate shared decision-making at the point of outpatient clinical care. The objective of this study was to investigate whether a computerized shared decision aid would be feasible to implement in an inner-city clinic by evaluating the current practices in shared decision-making, clinicians' use of computers, patient and clinicians' attitudes and beliefs toward computerized decision aids, and the influence of time on shared decision-making. Qualitative data analysis of observations and semi-structured interviews with patients and clinicians at an inner-city outpatient clinic. The findings provided an exploratory look at the prevalence of shared decision-making and attitudes about health information technology and decision aids. A prominent barrier to clinicians engaging in shared decision-making was a lack of perceived patient understanding of medical information. Some patients preferred their clinicians make recommendations for them rather than engage in formal shared decision-making. Health information technology was an integral part of the clinic visit and welcomed by most clinicians and patients. Some patients expressed the desire to engage with health information technology such as viewing their medical information on the computer screen with their clinicians. All participants were receptive to the idea of a decision aid integrated within the clinic visit although some clinicians were concerned about the accuracy of prognostic estimates for complex medical problems. We identified several important considerations for the design and implementation of a computerized decision aid including opportunities to: bridge clinician-patient communication about medical information while taking into account individual patients' decision-making preferences, complement expert clinician judgment with prognostic estimates, take advantage of patient waiting times, and make tasks involved during the clinic visit more efficient. These findings should be incorporated into the design and implementation of a computerized shared decision aid at an inner-city hospital.

Perceived Barriers and Facilitators of Using a Web-Based Interactive Decision Aid for Colorectal Cancer Screening in Community Practice Settings: Findings From Focus Groups With Primary Care Clinicians and Medical Office Staff

PubMed Central

2013-01-01

Background Information is lacking about the capacity of those working in community practice settings to utilize health information technology for colorectal cancer screening. Objective To address this gap we asked those working in community practice settings to share their perspectives about how the implementation of a Web-based patient-led decision aid might affect patient-clinician conversations about colorectal cancer screening and the day-to-day clinical workflow. Methods Five focus groups in five community practice settings were conducted with 8 physicians, 1 physician assistant, and 18 clinic staff. Focus groups were organized using a semistructured discussion guide designed to identify factors that mediate and impede the use of a Web-based decision aid intended to clarify patient preferences for colorectal cancer screening and to trigger shared decision making during the clinical encounter. Results All physicians, the physician assistant, and 8 of the 18 clinic staff were active participants in the focus groups. Clinician and staff participants from each setting reported a belief that the Web-based patient-led decision aid could be an informative and educational tool; in all but one setting participants reported a readiness to recommend the tool to patients. The exception related to clinicians from one clinic who described a preference for patients having fewer screening choices, noting that a colonoscopy was the preferred screening modality for patients in their clinic. Perceived barriers to utilizing the Web-based decision aid included patients’ lack of Internet access or low computer literacy, and potential impediments to the clinics’ daily workflow. Expanding patients’ use of an online decision aid that is both easy to access and understand and that is utilized by patients outside of the office visit was described as a potentially efficient means for soliciting patients’ screening preferences. Participants described that a system to link the online decision aid to a computerized reminder system could promote a better understanding of patients’ screening preferences, though some expressed concern that such a system could be difficult to keep up and running. Conclusions Community practice clinicians and staff perceived the Web-based decision aid technology as promising but raised questions as to how the technology and resultant information would be integrated into their daily practice workflow. Additional research investigating how to best implement online decision aids should be conducted prior to the widespread adoption of such technology so as to maximize the benefits of the technology while minimizing workflow disruptions. PMID:24351420

EXSPRT: An Expert Systems Approach to Computer-Based Adaptive Testing.

ERIC Educational Resources Information Center

Frick, Theodore W.; And Others

Expert systems can be used to aid decision making. A computerized adaptive test (CAT) is one kind of expert system, although it is not commonly recognized as such. A new approach, termed EXSPRT, was devised that combines expert systems reasoning and sequential probability ratio test stopping rules. EXSPRT-R uses random selection of test items,…

Decision Making In A High-Tech World: Automation Bias and Countermeasures

NASA Technical Reports Server (NTRS)

Mosier, Kathleen L.; Skitka, Linda J.; Burdick, Mark R.; Heers, Susan T.; Rosekind, Mark R. (Technical Monitor)

1996-01-01

Automated decision aids and decision support systems have become essential tools in many high-tech environments. In aviation, for example, flight management systems computers not only fly the aircraft, but also calculate fuel efficient paths, detect and diagnose system malfunctions and abnormalities, and recommend or carry out decisions. Air Traffic Controllers will soon be utilizing decision support tools to help them predict and detect potential conflicts and to generate clearances. Other fields as disparate as nuclear power plants and medical diagnostics are similarly becoming more and more automated. Ideally, the combination of human decision maker and automated decision aid should result in a high-performing team, maximizing the advantages of additional cognitive and observational power in the decision-making process. In reality, however, the presence of these aids often short-circuits the way that even very experienced decision makers have traditionally handled tasks and made decisions, and introduces opportunities for new decision heuristics and biases. Results of recent research investigating the use of automated aids have indicated the presence of automation bias, that is, errors made when decision makers rely on automated cues as a heuristic replacement for vigilant information seeking and processing. Automation commission errors, i.e., errors made when decision makers inappropriately follow an automated directive, or automation omission errors, i.e., errors made when humans fail to take action or notice a problem because an automated aid fails to inform them, can result from this tendency. Evidence of the tendency to make automation-related omission and commission errors has been found in pilot self reports, in studies using pilots in flight simulations, and in non-flight decision making contexts with student samples. Considerable research has found that increasing social accountability can successfully ameliorate a broad array of cognitive biases and resultant errors. To what extent these effects generalize to performance situations is not yet empirically established. The two studies to be presented represent concurrent efforts, with student and professional pilot samples, to determine the effects of accountability pressures on automation bias and on the verification of the accurate functioning of automated aids. Students (Experiment 1) and commercial pilots (Experiment 2) performed simulated flight tasks using automated aids. In both studies, participants who perceived themselves as accountable for their strategies of interaction with the automation were significantly more likely to verify its correctness, and committed significantly fewer automation-related errors than those who did not report this perception.

Evolutionary fuzzy modeling human diagnostic decisions.

PubMed

Peña-Reyes, Carlos Andrés

2004-05-01

Fuzzy CoCo is a methodology, combining fuzzy logic and evolutionary computation, for constructing systems able to accurately predict the outcome of a human decision-making process, while providing an understandable explanation of the underlying reasoning. Fuzzy logic provides a formal framework for constructing systems exhibiting both good numeric performance (accuracy) and linguistic representation (interpretability). However, fuzzy modeling--meaning the construction of fuzzy systems--is an arduous task, demanding the identification of many parameters. To solve it, we use evolutionary computation techniques (specifically cooperative coevolution), which are widely used to search for adequate solutions in complex spaces. We have successfully applied the algorithm to model the decision processes involved in two breast cancer diagnostic problems, the WBCD problem and the Catalonia mammography interpretation problem, obtaining systems both of high performance and high interpretability. For the Catalonia problem, an evolved system was embedded within a Web-based tool-called COBRA-for aiding radiologists in mammography interpretation.

Integrated system dynamics toolbox for water resources planning.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reno, Marissa Devan; Passell, Howard David; Malczynski, Leonard A.

2006-12-01

Public mediated resource planning is quickly becoming the norm rather than the exception. Unfortunately, supporting tools are lacking that interactively engage the public in the decision-making process and integrate over the myriad values that influence water policy. In the pages of this report we document the first steps toward developing a specialized decision framework to meet this need; specifically, a modular and generic resource-planning ''toolbox''. The technical challenge lies in the integration of the disparate systems of hydrology, ecology, climate, demographics, economics, policy and law, each of which influence the supply and demand for water. Specifically, these systems, their associatedmore » processes, and most importantly the constitutive relations that link them must be identified, abstracted, and quantified. For this reason, the toolbox forms a collection of process modules and constitutive relations that the analyst can ''swap'' in and out to model the physical and social systems unique to their problem. This toolbox with all of its modules is developed within the common computational platform of system dynamics linked to a Geographical Information System (GIS). Development of this resource-planning toolbox represents an important foundational element of the proposed interagency center for Computer Aided Dispute Resolution (CADRe). The Center's mission is to manage water conflict through the application of computer-aided collaborative decision-making methods. The Center will promote the use of decision-support technologies within collaborative stakeholder processes to help stakeholders find common ground and create mutually beneficial water management solutions. The Center will also serve to develop new methods and technologies to help federal, state and local water managers find innovative and balanced solutions to the nation's most vexing water problems. The toolbox is an important step toward achieving the technology development goals of this center.« less

Automating software design system DESTA

NASA Technical Reports Server (NTRS)

Lovitsky, Vladimir A.; Pearce, Patricia D.

1992-01-01

'DESTA' is the acronym for the Dialogue Evolutionary Synthesizer of Turnkey Algorithms by means of a natural language (Russian or English) functional specification of algorithms or software being developed. DESTA represents the computer-aided and/or automatic artificial intelligence 'forgiving' system which provides users with software tools support for algorithm and/or structured program development. The DESTA system is intended to provide support for the higher levels and earlier stages of engineering design of software in contrast to conventional Computer Aided Design (CAD) systems which provide low level tools for use at a stage when the major planning and structuring decisions have already been taken. DESTA is a knowledge-intensive system. The main features of the knowledge are procedures, functions, modules, operating system commands, batch files, their natural language specifications, and their interlinks. The specific domain for the DESTA system is a high level programming language like Turbo Pascal 6.0. The DESTA system is operational and runs on an IBM PC computer.

[Hardware for graphics systems].

PubMed

Goetz, C

1991-02-01

In all personal computer applications, be it for private or professional use, the decision of which "brand" of computer to buy is of central importance. In the USA Apple computers are mainly used in universities, while in Europe computers of the so-called "industry standard" by IBM (or clones thereof) have been increasingly used for many years. Independently of any brand name considerations, the computer components purchased must meet the current (and projected) needs of the user. Graphic capabilities and standards, processor speed, the use of co-processors, as well as input and output devices such as "mouse", printers and scanners are discussed. This overview is meant to serve as a decision aid. Potential users are given a short but detailed summary of current technical features.

Developing a Computer Touch-Screen Interactive Colorectal Screening Decision Aid for a Low-Literacy African American Population: Lessons Learned

PubMed Central

Bass, Sarah Bauerle; Gordon, Thomas F.; Ruzek, Sheryl Burt; Wolak, Caitlin; Ruggieri, Dominique; Mora, Gabriella; Rovito, Michael J.; Britto, Johnson; Parameswaran, Lalitha; Abedin, Zainab; Ward, Stephanie; Paranjape, Anuradha; Lin, Karen; Meyer, Brian; Pitts, Khaliah

2017-01-01

African Americans have higher colorectal cancer (CRC) mortality than White Americans and yet have lower rates of CRC screening. Increased screening aids in early detection and higher survival rates. Coupled with low literacy rates, the burden of CRC morbidity and mortality is exacerbated in this population, making it important to develop culturally and literacy appropriate aids to help low-literacy African Americans make informed decisions about CRC screening. This article outlines the development of a low-literacy computer touch-screen colonoscopy decision aid using an innovative marketing method called perceptual mapping and message vector modeling. This method was used to mathematically model key messages for the decision aid, which were then used to modify an existing CRC screening tutorial with different messages. The final tutorial was delivered through computer touch-screen technology to increase access and ease of use for participants. Testing showed users were not only more comfortable with the touch-screen technology but were also significantly more willing to have a colonoscopy compared with a “usual care group.” Results confirm the importance of including participants in planning and that the use of these innovative mapping and message design methods can lead to significant CRC screening attitude change. PMID:23132838

Development and preliminary user testing of the DCIDA (Dynamic computer interactive decision application) for 'nudging' patients towards high quality decisions.

PubMed

Bansback, Nick; Li, Linda C; Lynd, Larry; Bryan, Stirling

2014-08-01

Patient decision aids (PtDA) are developed to facilitate informed, value-based decisions about health. Research suggests that even when informed with necessary evidence and information, cognitive errors can prevent patients from choosing the option that is most congruent with their own values. We sought to utilize principles of behavioural economics to develop a computer application that presents information from conventional decision aids in a way that reduces these errors, subsequently promoting higher quality decisions. The Dynamic Computer Interactive Decision Application (DCIDA) was developed to target four common errors that can impede quality decision making with PtDAs: unstable values, order effects, overweighting of rare events, and information overload. Healthy volunteers were recruited to an interview to use three PtDAs converted to the DCIDA on a computer equipped with an eye tracker. Participants were first used a conventional PtDA, and then subsequently used the DCIDA version. User testing was assessed based on whether respondents found the software both usable: evaluated using a) eye-tracking, b) the system usability scale, and c) user verbal responses from a 'think aloud' protocol; and useful: evaluated using a) eye-tracking, b) whether preferences for options were changed, and c) and the decisional conflict scale. Of the 20 participants recruited to the study, 11 were male (55%), the mean age was 35, 18 had at least a high school education (90%), and 8 (40%) had a college or university degree. Eye-tracking results, alongside a mean system usability scale score of 73 (range 68-85), indicated a reasonable degree of usability for the DCIDA. The think aloud study suggested areas for further improvement. The DCIDA also appeared to be useful to participants wherein subjects focused more on the features of the decision that were most important to them (21% increase in time spent focusing on the most important feature). Seven subjects (25%) changed their preferred option when using DCIDA. Preliminary results suggest that DCIDA has potential to improve the quality of patient decision-making. Next steps include larger studies to test individual components of DCIDA and feasibility testing with patients making real decisions.

Use of agents to implement an integrated computing environment

NASA Technical Reports Server (NTRS)

Hale, Mark A.; Craig, James I.

1995-01-01

Integrated Product and Process Development (IPPD) embodies the simultaneous application to both system and quality engineering methods throughout an iterative design process. The use of IPPD results in the time-conscious, cost-saving development of engineering systems. To implement IPPD, a Decision-Based Design perspective is encapsulated in an approach that focuses on the role of the human designer in product development. The approach has two parts and is outlined in this paper. First, an architecture, called DREAMS, is being developed that facilitates design from a decision-based perspective. Second, a supporting computing infrastructure, called IMAGE, is being designed. Agents are used to implement the overall infrastructure on the computer. Successful agent utilization requires that they be made of three components: the resource, the model, and the wrap. Current work is focused on the development of generalized agent schemes and associated demonstration projects. When in place, the technology independent computing infrastructure will aid the designer in systematically generating knowledge used to facilitate decision-making.

Decision aids for patients.

PubMed

Lenz, Matthias; Buhse, Susanne; Kasper, Jürgen; Kupfer, Ramona; Richter, Tanja; Mühlhauser, Ingrid

2012-06-01

Patients want to be more involved in medical decision-making. To this end, some decision aids are now available. We present an overview of this subject, in which we explain the terms "shared decision-making", "decision aid", and "evidence-based patient information" and survey information on the available decision aids in German and other languages on the basis of a literature search in MEDLINE, EMBASE and PsycInfo and a current Cochrane Review. We also searched the Internet for providers of decision aids in Germany. Decision aids exist in the form of brochures, decision tables, videos, and computer programs; they address various topics in the prevention, diagnosis, and treatment of disease. They typically contain information on the advantages and disadvantages of the available options, as well as guidance for personal decision-making. They can be used alone or as a part of structured counseling or patient education. Minimal quality standards include an adequate evidence base, completeness, absence of bias, and intelligibility. Our search revealed 12 randomized controlled trials (RCTs) of decision aids in German and 106 RCTs of decision aids in other languages. These trials studied the outcome of the use of decision aids not just with respect to clinical developments, but also with respect to patient knowledge, adherence to treatment regimens, satisfaction, involvement in decision-making, autonomy preference, and decisional conflicts. Only a small fraction of the available decision aids were systematically developed and have been subjected to systematic evaluation. Patients are still not receiving the help in decision-making to which medical ethics entitles them. Structures need to be put in place for the sustainable development, evaluation and implementation of high-quality decision aids.

Using Unix system auditing for detecting network intrusions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christensen, M.J.

1993-03-01

Intrusion Detection Systems (IDSs) are designed to detect actions of individuals who use computer resources without authorization as well as legitimate users who exceed their privileges. This paper describes a novel approach to IDS research, namely a decision aiding approach to intrusion detection. The introduction of a decision tree represents the logical steps necessary to distinguish and identify different types of attacks. This tool, the Intrusion Decision Aiding Tool (IDAT), utilizes IDS-based attack models and standard Unix audit data. Since attacks have certain characteristics and are based on already developed signature attack models, experienced and knowledgeable Unix system administrators knowmore » what to look for in system audit logs to determine if a system has been attacked. Others, however, are usually less able to recognize common signatures of unauthorized access. Users can traverse the tree using available audit data displayed by IDAT and general knowledge they possess to reach a conclusion regarding suspicious activity. IDAT is an easy-to-use window based application that gathers, analyzes, and displays pertinent system data according to Unix attack characteristics. IDAT offers a more practical approach and allows the user to make an informed decision regarding suspicious activity.« less

Back to the Bedside: Developing a Bedside Aid for Concussion and Brain Injury Decisions in the Emergency Department

PubMed Central

Melnick, Edward R.; Lopez, Kevin; Hess, Erik P.; Abujarad, Fuad; Brandt, Cynthia A.; Shiffman, Richard N.; Post, Lori A.

2015-01-01

Context: Current information-rich electronic health record (EHR) interfaces require large, high-resolution screens running on desktop computers. This interface compromises the provider’s already limited time at the bedside by physically separating the patient from the doctor. The case study presented here describes a patient-centered clinical decision support (CDS) design process that aims to bring the physician back to the bedside by integrating a patient decision aid with CDS for shared use by the patient and provider on a touchscreen tablet computer for deciding whether or not to obtain a CT scan for minor head injury in the emergency department, a clinical scenario that could benefit from CDS but has failed previous implementation attempts. Case Description: This case study follows the user-centered design (UCD) approach to build a bedside aid that is useful and usable, and that promotes shared decision-making between patients and their providers using a tablet computer at the bedside. The patient-centered decision support design process focuses on the prototype build using agile software development, but also describes the following: (1) the requirement gathering phase including triangulated qualitative research (focus groups and cognitive task analysis) to understand current challenges, (2) features for patient education, the physician, and shared decision-making, (3) system architecture and technical requirements, and (4) future plans for formative usability testing and field testing. Lessons Learned: We share specific lessons learned and general recommendations from critical insights gained in the patient-centered decision support design process about early stakeholder engagement, EHR integration, external expert feedback, challenges to two users on a single device, project management, and accessibility. Conclusions: Successful implementation of this tool will require seamless integration into the provider’s workflow. This protocol can create an effective interface for shared decision-making and safe resource reduction at the bedside in the austere and dynamic clinical environment of the ED and is generalizable for these purposes in other clinical environments as well. PMID:26290885

Back to the Bedside: Developing a Bedside Aid for Concussion and Brain Injury Decisions in the Emergency Department.

PubMed

Melnick, Edward R; Lopez, Kevin; Hess, Erik P; Abujarad, Fuad; Brandt, Cynthia A; Shiffman, Richard N; Post, Lori A

2015-01-01

Current information-rich electronic health record (EHR) interfaces require large, high-resolution screens running on desktop computers. This interface compromises the provider's already limited time at the bedside by physically separating the patient from the doctor. The case study presented here describes a patient-centered clinical decision support (CDS) design process that aims to bring the physician back to the bedside by integrating a patient decision aid with CDS for shared use by the patient and provider on a touchscreen tablet computer for deciding whether or not to obtain a CT scan for minor head injury in the emergency department, a clinical scenario that could benefit from CDS but has failed previous implementation attempts. This case study follows the user-centered design (UCD) approach to build a bedside aid that is useful and usable, and that promotes shared decision-making between patients and their providers using a tablet computer at the bedside. The patient-centered decision support design process focuses on the prototype build using agile software development, but also describes the following: (1) the requirement gathering phase including triangulated qualitative research (focus groups and cognitive task analysis) to understand current challenges, (2) features for patient education, the physician, and shared decision-making, (3) system architecture and technical requirements, and (4) future plans for formative usability testing and field testing. We share specific lessons learned and general recommendations from critical insights gained in the patient-centered decision support design process about early stakeholder engagement, EHR integration, external expert feedback, challenges to two users on a single device, project management, and accessibility. Successful implementation of this tool will require seamless integration into the provider's workflow. This protocol can create an effective interface for shared decision-making and safe resource reduction at the bedside in the austere and dynamic clinical environment of the ED and is generalizable for these purposes in other clinical environments as well.

Computerized Vocational Information and Decision-Making in Secured Environments in New York State.

ERIC Educational Resources Information Center

Heller, Barbara R.; Gross, Linda Chitayat

A study was conducted on the use of the Guidance Information System (GIS), an on-line computer information retrieval system for occupational, two-year college, four-year college, and scholarship and financial aid information, in four detention/correctional facilities in New York. These were the Queens House of Detention for Men (QHDM), Brooklyn…

The University of Michigan's Computer-Aided Engineering Network.

ERIC Educational Resources Information Center

Atkins, D. E.; Olsen, Leslie A.

1986-01-01

Presents an overview of the Computer-Aided Engineering Network (CAEN) of the University of Michigan. Describes its arrangement of workstations, communication networks, and servers. Outlines the factors considered in hardware and software decision making. Reviews the program's impact on students. (ML)

Computer-Aided Decision Making.

DTIC Science & Technology

1988-04-01

Center at Gunter APS, Alabama, 1% predicts that 150.000 more microcomputers, with integrated software, will be VP aided !,: the A:r Fcrce inventory...a computer’s power when he said, ’it is also useful to anticipate or predict changes in the data Pondering ’what if’ situations enabled me to answer... predict future b) experts forecast In Isolation, then consensus is found C. Group decision making (3t30-34) Slide i-i 1. Advantages a. broader background 1

Combining destination diversion decisions and critical in-flight event diagnosis in computer aided testing of pilots

NASA Technical Reports Server (NTRS)

Rockwell, T. H.; Giffin, W. C.; Romer, D. J.

1984-01-01

Rockwell and Giffin (1982) and Giffin and Rockwell (1983) have discussed the use of computer aided testing (CAT) in the study of pilot response to critical in-flight events. The present investigation represents an extension of these earlier studies. In testing pilot responses to critical in-flight events, use is made of a Plato-touch CRT system operating on a menu based format. In connection with the typical diagnostic problem, the pilot was presented with symptoms within a flight scenario. In one problem, the pilot has four minutes for obtaining the information which is needed to make a diagnosis of the problem. In the reported research, the attempt has been made to combine both diagnosis and diversion scenario into a single computer aided test. Tests with nine subjects were conducted. The obtained results and their significance are discussed.

Human-computer interface for the study of information fusion concepts in situation analysis and command decision support systems

NASA Astrophysics Data System (ADS)

Roy, Jean; Breton, Richard; Paradis, Stephane

2001-08-01

Situation Awareness (SAW) is essential for commanders to conduct decision-making (DM) activities. Situation Analysis (SA) is defined as a process, the examination of a situation, its elements, and their relations, to provide and maintain a product, i.e., a state of SAW for the decision maker. Operational trends in warfare put the situation analysis process under pressure. This emphasizes the need for a real-time computer-based Situation analysis Support System (SASS) to aid commanders in achieving the appropriate situation awareness, thereby supporting their response to actual or anticipated threats. Data fusion is clearly a key enabler for SA and a SASS. Since data fusion is used for SA in support of dynamic human decision-making, the exploration of the SA concepts and the design of data fusion techniques must take into account human factor aspects in order to ensure a cognitive fit of the fusion system with the decision-maker. Indeed, the tight human factor aspects in order to ensure a cognitive fit of the fusion system with the decision-maker. Indeed, the tight integration of the human element with the SA technology is essential. Regarding these issues, this paper provides a description of CODSI (Command Decision Support Interface), and operational- like human machine interface prototype for investigations in computer-based SA and command decision support. With CODSI, one objective was to apply recent developments in SA theory and information display technology to the problem of enhancing SAW quality. It thus provides a capability to adequately convey tactical information to command decision makers. It also supports the study of human-computer interactions for SA, and methodologies for SAW measurement.

Battle Environment Assessment for Commanders: A Concept of Support for Joint and Component Strategy and Operations.

DTIC Science & Technology

1988-03-14

focused application of decision aids. These decision aids must incorporate standardized processes, computer assisted artificial intelligence, linkage...Theater Planning. A Strategic-Operational Perspective,’ by COL MIke ,or i n Olesak, John, LTC Office of the Deputy Chief of Staff, Inteligence , U S

A Concurrent Distributed System for Aircraft Tactical Decision Generation

NASA Technical Reports Server (NTRS)

McManus, John W.

1990-01-01

A research program investigating the use of artificial intelligence (AI) techniques to aid in the development of a Tactical Decision Generator (TDG) for Within Visual Range (WVR) air combat engagements is discussed. The application of AI programming and problem solving methods in the development and implementation of a concurrent version of the Computerized Logic For Air-to-Air Warfare Simulations (CLAWS) program, a second generation TDG, is presented. Concurrent computing environments and programming approaches are discussed and the design and performance of a prototype concurrent TDG system are presented.

Louhi 2010: Special issue on Text and Data Mining of Health Documents

PubMed Central

2011-01-01

The papers presented in this supplement focus and reflect on computer use in every-day clinical work in hospitals and clinics such as electronic health record systems, pre-processing for computer aided summaries, clinical coding, computer decision systems, as well as related ethical concerns and security. Much of this work concerns itself by necessity with incorporation and development of language processing tools and methods, and as such this supplement aims at providing an arena for reporting on development in a diversity of languages. In the supplement we can read about some of the challenges identified above. PMID:21992545

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, M.A.; Craig, J.I.

Integrated Product and Process Development (IPPD) embodies the simultaneous application to both system and quality engineering methods throughout an iterative design process. The use of IPPD results in the time-conscious, cost-saving development of engineering systems. To implement IPPD, a Decision-Based Design perspective is encapsulated in an approach that focuses on the role of the human designer in product development. The approach has two parts and is outlined in this paper. First, an architecture, called DREAMS, is being developed that facilitates design from a decision-based perspective. Second, a supporting computing infrastructure, called IMAGE, is being designed. Agents are used to implementmore » the overall infrastructure on the computer. Successful agent utilization requires that they be made of three components: the resource, the model, and the wrap. Current work is focused on the development of generalized agent schemes and associated demonstration projects. When in place, the technology independent computing infrastructure will aid the designer in systematically generating knowledge used to facilitate decision-making.« less

Learning Reverse Engineering and Simulation with Design Visualization

NASA Technical Reports Server (NTRS)

Hemsworth, Paul J.

2018-01-01

The Design Visualization (DV) group supports work at the Kennedy Space Center by utilizing metrology data with Computer-Aided Design (CAD) models and simulations to provide accurate visual representations that aid in decision-making. The capability to measure and simulate objects in real time helps to predict and avoid potential problems before they become expensive in addition to facilitating the planning of operations. I had the opportunity to work on existing and new models and simulations in support of DV and NASA’s Exploration Ground Systems (EGS).

Development and preliminary user testing of the DCIDA (Dynamic computer interactive decision application) for ‘nudging’ patients towards high quality decisions

PubMed Central

2014-01-01

Background Patient decision aids (PtDA) are developed to facilitate informed, value-based decisions about health. Research suggests that even when informed with necessary evidence and information, cognitive errors can prevent patients from choosing the option that is most congruent with their own values. We sought to utilize principles of behavioural economics to develop a computer application that presents information from conventional decision aids in a way that reduces these errors, subsequently promoting higher quality decisions. Method The Dynamic Computer Interactive Decision Application (DCIDA) was developed to target four common errors that can impede quality decision making with PtDAs: unstable values, order effects, overweighting of rare events, and information overload. Healthy volunteers were recruited to an interview to use three PtDAs converted to the DCIDA on a computer equipped with an eye tracker. Participants were first used a conventional PtDA, and then subsequently used the DCIDA version. User testing was assessed based on whether respondents found the software both usable: evaluated using a) eye-tracking, b) the system usability scale, and c) user verbal responses from a ‘think aloud’ protocol; and useful: evaluated using a) eye-tracking, b) whether preferences for options were changed, and c) and the decisional conflict scale. Results Of the 20 participants recruited to the study, 11 were male (55%), the mean age was 35, 18 had at least a high school education (90%), and 8 (40%) had a college or university degree. Eye-tracking results, alongside a mean system usability scale score of 73 (range 68–85), indicated a reasonable degree of usability for the DCIDA. The think aloud study suggested areas for further improvement. The DCIDA also appeared to be useful to participants wherein subjects focused more on the features of the decision that were most important to them (21% increase in time spent focusing on the most important feature). Seven subjects (25%) changed their preferred option when using DCIDA. Conclusion Preliminary results suggest that DCIDA has potential to improve the quality of patient decision-making. Next steps include larger studies to test individual components of DCIDA and feasibility testing with patients making real decisions. PMID:25084808

Functional specifications for a radioactive waste decision support system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westrom, G.B.; Kurrasch, E.R.; Carlton, R.E.

1989-09-01

It is generally recognized that decisions relative to the treatment, handling, transportation and disposal of low-level wastes produced in nuclear power plants involve a complex array of many inter-related elements or considerations. Complex decision processes can be aided through the use of computer-based expert systems which are based on the knowledge of experts and the inferencing of that knowledge to provide advice to an end-user. To determine the feasibility of developing and applying an expert system in nuclear plant low level waste operations, a Functional Specification for a Radwaste Decision Support System (RDSS) was developed. All areas of radwaste management,more » from the point of waste generation to the disposition of the waste in the final disposal location were considered for inclusion within the scope of the RDSS. 27 figs., 8 tabs.« less

Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review.

PubMed

Ewers, R; Schicho, K; Undt, G; Wanschitz, F; Truppe, M; Seemann, R; Wagner, A

2005-01-01

Computer-aided surgical navigation technology is commonly used in craniomaxillofacial surgery. It offers substantial improvement regarding esthetic and functional aspects in a range of surgical procedures. Based on augmented reality principles, where the real operative site is merged with computer generated graphic information, computer-aided navigation systems were employed, among other procedures, in dental implantology, arthroscopy of the temporomandibular joint, osteotomies, distraction osteogenesis, image guided biopsies and removals of foreign bodies. The decision to perform a procedure with or without computer-aided intraoperative navigation depends on the expected benefit to the procedure as well as on the technical expenditure necessary to achieve that goal. This paper comprises the experience gained in 12 years of research, development and routine clinical application. One hundred and fifty-eight operations with successful application of surgical navigation technology--divided into five groups--are evaluated regarding the criteria "medical benefit" and "technical expenditure" necessary to perform these procedures. Our results indicate that the medical benefit is likely to outweight the expenditure of technology with few exceptions (calvaria transplant, resection of the temporal bone, reconstruction of the orbital floor). Especially in dental implantology, specialized software reduces time and additional costs necessary to plan and perform procedures with computer-aided surgical navigation.

Artificial Intelligence (AI) Based Tactical Guidance for Fighter Aircraft

NASA Technical Reports Server (NTRS)

McManus, John W.; Goodrich, Kenneth H.

1990-01-01

A research program investigating the use of Artificial Intelligence (AI) techniques to aid in the development of a Tactical Decision Generator (TDG) for Within Visual Range (WVR) air combat engagements is discussed. The application of AI programming and problem solving methods in the development and implementation of the Computerized Logic For Air-to-Air Warfare Simulations (CLAWS), a second generation TDG, is presented. The Knowledge-Based Systems used by CLAWS to aid in the tactical decision-making process are outlined in detail, and the results of tests to evaluate the performance of CLAWS versus a baseline TDG developed in FORTRAN to run in real-time in the Langley Differential Maneuvering Simulator (DMS), are presented. To date, these test results have shown significant performance gains with respect to the TDG baseline in one-versus-one air combat engagements, and the AI-based TDG software has proven to be much easier to modify and maintain than the baseline FORTRAN TDG programs. Alternate computing environments and programming approaches, including the use of parallel algorithms and heterogeneous computer networks are discussed, and the design and performance of a prototype concurrent TDG system are presented.

The microcomputer in the dental office: a new diagnostic aid.

PubMed

van der Stelt, P F

1985-06-01

The first computer applications in the dental office were based upon standard accountancy procedures. Recently, more and more computer applications have become available to meet the specific requirements of dental practice. This implies not only business procedures, but also facilities to store patient records in the system and retrieve them easily. Another development concerns the automatic calculation of diagnostic data such as those provided in cephalometric analysis. Furthermore, growth and surgical results in the craniofacial area can be predicted by computerized extrapolation. Computers have been useful in obtaining the patient's anamnestic data objectively and for the making of decisions based on such data. Computer-aided instruction systems have been developed for undergraduate students to bridge the gap between textbook and patient interaction without the risks inherent in the latter. Radiology will undergo substantial changes as a result of the application of electronic imaging devices instead of the conventional radiographic films. Computer-assisted electronic imaging will enable image processing, image enhancement, pattern recognition and data transmission for consultation and storage purposes. Image processing techniques will increase image quality whilst still allowing low-dose systems. Standardization of software and system configuration and the development of 'user friendly' programs is the major concern for the near future.

Dypas: A dynamic payload scheduler for shuttle missions

NASA Technical Reports Server (NTRS)

Davis, Stephen

1988-01-01

Decision and analysis systems have had broad and very practical application areas in the human decision making process. These software systems range from the help sections in simple accounting packages, to the more complex computer configuration programs. Dypas is a decision and analysis system that aids prelaunch shutlle scheduling, and has added functionality to aid the rescheduling done in flight. Dypas is written in Common Lisp on a Symbolics Lisp machine. Dypas differs from other scheduling programs in that it can draw its knowledge from different rule bases and apply them to different rule interpretation schemes. The system has been coded with Flavors, an object oriented extension to Common Lisp on the Symbolics hardware. This allows implementation of objects (experiments) to better match the problem definition, and allows a more coherent solution space to be developed. Dypas was originally developed to test a programmer's aptitude toward Common Lisp and the Symbolics software environment. Since then the system has grown into a large software effort with several programmers and researchers thrown into the effort. Dypas is currently using two expert systems and three inferencing procedures to generate a many object schedule. The paper will review the abilities of Dypas and comment on its functionality.

Knowledge Based System Applications for Guidance and Control (Application des Systemes a Base de Connaissances au Guidage-Pilotage)

DTIC Science & Technology

1991-01-01

techniques and integration concepts. Recent advances in digital computation techniques including data base management , represent the core enabling...tactical information management and effective pilot interaction are essential. Pilot decision aiding, combat automation, sensor fusion and ol-board...tactical battle management concepts offer the opportunity for substantial mission effectiveness improvements. Although real-time tactical military

An interactive system for computer-aided diagnosis of breast masses.

PubMed

Wang, Xingwei; Li, Lihua; Liu, Wei; Xu, Weidong; Lederman, Dror; Zheng, Bin

2012-10-01

Although mammography is the only clinically accepted imaging modality for screening the general population to detect breast cancer, interpreting mammograms is difficult with lower sensitivity and specificity. To provide radiologists "a visual aid" in interpreting mammograms, we developed and tested an interactive system for computer-aided detection and diagnosis (CAD) of mass-like cancers. Using this system, an observer can view CAD-cued mass regions depicted on one image and then query any suspicious regions (either cued or not cued by CAD). CAD scheme automatically segments the suspicious region or accepts manually defined region and computes a set of image features. Using content-based image retrieval (CBIR) algorithm, CAD searches for a set of reference images depicting "abnormalities" similar to the queried region. Based on image retrieval results and a decision algorithm, a classification score is assigned to the queried region. In this study, a reference database with 1,800 malignant mass regions and 1,800 benign and CAD-generated false-positive regions was used. A modified CBIR algorithm with a new function of stretching the attributes in the multi-dimensional space and decision scheme was optimized using a genetic algorithm. Using a leave-one-out testing method to classify suspicious mass regions, we compared the classification performance using two CBIR algorithms with either equally weighted or optimally stretched attributes. Using the modified CBIR algorithm, the area under receiver operating characteristic curve was significantly increased from 0.865 ± 0.006 to 0.897 ± 0.005 (p < 0.001). This study demonstrated the feasibility of developing an interactive CAD system with a large reference database and achieving improved performance.

Evaluation of computer-generated guidelines for companions of paediatric patients undergoing chemotherapy.

PubMed

Lopes, Vagner José; Shmeil, Marcos Augusto Hochuli

2017-04-27

To compare computer-generated guidelines with and without the use of a Clinical Decision Support System - Oncology Care and Healthcare for Chemotherapy Patients, for the caregivers of children undergoing chemotherapy. This is a descriptive, evaluative, and quantitative study conducted at a paediatrics hospital in Curitiba, Paraná, Brazil, from December 2015 to January 2016. The sample consisted of 58 participants divided into two groups: Group 1, without the aid of software, and Group 2, with the aid of the software. The data were analysed using the Mann-Whitney U test. The guidelines revealed a statistical significance (p<0.05), with a prevalence of a higher concordance average in Group 2 in comparison with Group 1. Computer-generated guidelines are a valuable qualitative support tool for nurses.

Enhancements in medicine by integrating content based image retrieval in computer-aided diagnosis

NASA Astrophysics Data System (ADS)

Aggarwal, Preeti; Sardana, H. K.

2010-02-01

Computer-aided diagnosis (CAD) has become one of the major research subjects in medical imaging and diagnostic radiology. With cad, radiologists use the computer output as a "second opinion" and make the final decisions. Retrieving images is a useful tool to help radiologist to check medical image and diagnosis. The impact of contentbased access to medical images is frequently reported but existing systems are designed for only a particular context of diagnosis. The challenge in medical informatics is to develop tools for analyzing the content of medical images and to represent them in a way that can be efficiently searched and compared by the physicians. CAD is a concept established by taking into account equally the roles of physicians and computers. To build a successful computer aided diagnostic system, all the relevant technologies, especially retrieval need to be integrated in such a manner that should provide effective and efficient pre-diagnosed cases with proven pathology for the current case at the right time. In this paper, it is suggested that integration of content-based image retrieval (CBIR) in cad can bring enormous results in medicine especially in diagnosis. This approach is also compared with other approaches by highlighting its advantages over those approaches.

Computer Based Decision Support Tool for Helicopter Mission Planning in Disaster Relief and Military Operations (Outil informatique d’aide a la decision pour la planification des missions d’helicopteres dans des operations militaires et de secours en cas de catastrophe)

DTIC Science & Technology

2008-06-01

capacity planning; • Electrical generation capacity planning; • Machine scheduling; • Freight scheduling; • Dairy farm expansion planning...Support Systems and Multi Criteria Decision Analysis Products A.2.11.2.2.1 ELECTRE IS ELECTRE IS is a generalization of ELECTRE I. It is a...criteria, ELECTRE IS supports the user in the process of selecting one alternative or a subset of alternatives. The method consists of two parts

Launching a virtual decision lab: development and field-testing of a web-based patient decision support research platform.

PubMed

Hoffman, Aubri S; Llewellyn-Thomas, Hilary A; Tosteson, Anna N A; O'Connor, Annette M; Volk, Robert J; Tomek, Ivan M; Andrews, Steven B; Bartels, Stephen J

2014-12-12

Over 100 trials show that patient decision aids effectively improve patients' information comprehension and values-based decision making. However, gaps remain in our understanding of several fundamental and applied questions, particularly related to the design of interactive, personalized decision aids. This paper describes an interdisciplinary development process for, and early field testing of, a web-based patient decision support research platform, or virtual decision lab, to address these questions. An interdisciplinary stakeholder panel designed the web-based research platform with three components: a) an introduction to shared decision making, b) a web-based patient decision aid, and c) interactive data collection items. Iterative focus groups provided feedback on paper drafts and online prototypes. A field test assessed a) feasibility for using the research platform, in terms of recruitment, usage, and acceptability; and b) feasibility of using the web-based decision aid component, compared to performance of a videobooklet decision aid in clinical care. This interdisciplinary, theory-based, patient-centered design approach produced a prototype for field-testing in six months. Participants (n = 126) reported that: the decision aid component was easy to use (98%), information was clear (90%), the length was appropriate (100%), it was appropriately detailed (90%), and it held their interest (97%). They spent a mean of 36 minutes using the decision aid and 100% preferred using their home/library computer. Participants scored a mean of 75% correct on the Decision Quality, Knowledge Subscale, and 74 out of 100 on the Preparation for Decision Making Scale. Completing the web-based decision aid reduced mean Decisional Conflict scores from 31.1 to 19.5 (p < 0.01). Combining decision science and health informatics approaches facilitated rapid development of a web-based patient decision support research platform that was feasible for use in research studies in terms of recruitment, acceptability, and usage. Within this platform, the web-based decision aid component performed comparably with the videobooklet decision aid used in clinical practice. Future studies may use this interactive research platform to study patients' decision making processes in real-time, explore interdisciplinary approaches to designing web-based decision aids, and test strategies for tailoring decision support to meet patients' needs and preferences.

Systematic Review of Decision Aids for Newly Diagnosed Patients with Prostate Cancer Making Treatment Decisions.

PubMed

Adsul, Prajakta; Wray, Ricardo; Spradling, Kyle; Darwish, Oussama; Weaver, Nancy; Siddiqui, Sameer

2015-11-01

Despite established evidence for using patient decision aids, use with newly diagnosed patients with prostate cancer remains limited partly due to variability in aid characteristics. We systematically reviewed decision aids for newly diagnosed patients with prostate cancer. Published peer reviewed journal articles, unpublished literature on the Internet and the Ottawa decision aids web repository were searched to identify decision aids designed for patients with prostate cancer facing treatment decisions. A total of 14 aids were included in study. Supplementary materials on aid development and published studies evaluating the aids were also included. We studied aids designed to help patients make specific choices among options and outcomes relevant to health status that were specific to prostate cancer treatment and in English only. Aids were reviewed for IPDAS (International Patient Decision Aid Standards) and additional standards deemed relevant to prostate cancer treatment decisions. They were also reviewed for novel criteria on the potential for implementation. Acceptable interrater reliability was achieved at Krippendorff α = 0.82. Eight of the 14 decision aids (57.1%) were developed in the United States, 6 (42.8%) were print based, 5 (35.7%) were web or print based and only 4 (28.5%) had been updated since 2013. Ten aids (71.4%) were targeted to prostate cancer stage. All discussed radiation and surgery, 10 (71.4%) discussed active surveillance and/or watchful waiting and 8 (57.1%) discussed hormonal therapy. Of the aids 64.2% presented balanced perspectives on treatment benefits and risks, and/or outcome probabilities associated with each option. Ten aids (71.4%) presented value clarification prompts for patients and steps to make treatment decisions. No aid was tested with physicians and only 4 (28.6%) were tested with patients. Nine aids (64.2%) provided details on data appraisal and 4 (28.6%) commented on the quality of evidence used. Seven of the 8 web or computer based aids (87.5%) provided patients with the opportunity to interact with the aid. All except 1 aid scored above the 9th grade reading level. No evidence on aid implementation in routine practice was available. As physicians look to adopt decision aids in practice, they may base the choice of aid on characteristics that correlate with patient socioeconomic and educational status, personal practice style and practice setting. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

An approach to quality and performance control in a computer-assisted clinical chemistry laboratory.

PubMed Central

Undrill, P E; Frazer, S C

1979-01-01

A locally developed, computer-based clinical chemistry laboratory system has been in operation since 1970. This utilises a Digital Equipment Co Ltd PDP 12 and an interconnected PDP 8/F computer. Details are presented of the performance and quality control techniques incorporated into the system. Laboratory performance is assessed through analysis of results from fixed-level control sera as well as from cumulative sum methods. At a simple level the presentation may be considered purely indicative, while at a more sophisticated level statistical concepts have been introduced to aid the laboratory controller in decision-making processes. PMID:438340

Investigation of optimal use of computer-aided detection systems: the role of the "machine" in decision making process.

PubMed

Paquerault, Sophie; Hardy, Paul T; Wersto, Nancy; Chen, John; Smith, Robert C

2010-09-01

The aim of this study was to explore different computerized models (the "machine") as a means to achieve optimal use of computer-aided detection (CAD) systems and to investigate whether these models can play a primary role in clinical decision making and possibly replace a clinician's subjective decision for combining his or her own assessment with that provided by a CAD system. Data previously collected from a fully crossed, multiple-reader, multiple-case observer study with and without CAD by seven observers asked to identify simulated small masses on two separate sets of 100 mammographic images (low-contrast and high-contrast sets; ie, low-contrast and high-contrast simulated masses added to random locations on normal mammograms) were used. This allowed testing two relative sensitivities between the observers and CAD. Seven models that combined detection assessments from CAD standalone, unaided read, and CAD-aided read (second read and concurrent read) were developed using the leave-one-out technique for training and testing. These models were personalized for each observer. Detection performance accuracies were analyzed using the area under a portion of the free-response receiver-operating characteristic curve (AUFC), sensitivity, and number of false-positives per image. For the low-contrast set, the use of computerized models resulted in significantly higher AUFCs compared to the unaided read mode for all readers, whereas the increased AUFCs between CAD-aided (second and concurrent reads; ie, decisions made by the readers) and unaided read modes were statistically significant for a majority, but not all, of the readers (four and five of the seven readers, respectively). For the high-contrast set, there were no significant trends in the AUFCs whether or not a model was used to combine the original reading modes. Similar results were observed when using sensitivity as the figure of merit. However, the average number of false-positives per image resulting from the computerized models remained the same as that obtained from the unaided read modes. Individual computerized models (the machine) that combine image assessments from CAD standalone, unaided read, and CAD-aided read can increase detection performance compared to the reading done by the observer. However, relative sensitivity (ie, the difference in sensitivity between CAD standalone and unaided read) was a critical factor that determined incremental improvement in decision making, whether made by the observer or using computerized models. Published by Elsevier Inc.

Choosing a Microcomputer for Use as a Teaching Aid.

ERIC Educational Resources Information Center

Visniesky, Cheryl; Hocking, Joan

A step-by-step guide to the selection of a microcomputer system is provided for educators having made the decision to implement computer-assisted instruction. The first step is to clarify reasons for using a microcomputer rather than conventional instructional materials. Next, the degree of use (e.g., types of courses and number of departments…

Firefighting Trainer

NASA Technical Reports Server (NTRS)

1984-01-01

Firefighting trainees conduct fire control exercises using a prototype simulator known as the Emergency Management Computer Aided Training System (EMCAT). Developed by Marshall Space Flight Center (MFS) in response to a request from the Huntsville (AL) Fire Department, EMCAT enables a trainee to assume the role of fireground commander and make quick decisions on best use of his fire fighting personnel and equipment.

InformedTogether: Usability Evaluation of a Web-Based Decision Aid to Facilitate Shared Advance Care Planning for Severe Chronic Obstructive Pulmonary Disease

PubMed Central

Uhler, Lauren M; Pérez Figueroa, Rafael E; Dickson, Mark; McCullagh, Lauren; Kushniruk, Andre; Monkman, Helen; Witteman, Holly O

2015-01-01

Background Advance care planning may help patients receive treatments that better align with their goals for care. We developed a Web-based decision aid called InformedTogether to facilitate shared advance care planning between chronic obstructive pulmonary disease (COPD) patients and their doctors. Objective Our objective was to assess the usability of the InformedTogether decision aid, including whether users could interact with the decision aid to engage in tasks required for shared decision making, whether users found the decision aid acceptable, and implications for redesign. Methods We conducted an observational study with 15 patients and 8 doctors at two ethnically and socioeconomically diverse outpatient clinics. Data included quantitative and qualitative observations of patients and doctors using the decision aid on tablet or laptop computers and data from semistructured interviews. Patients were shown the decision aid by a researcher acting as the doctor. Pulmonary doctors were observed using the decision aid independently and asked to think aloud (ie, verbalize their thoughts). A thematic analysis was implemented to explore key issues related to decision aid usability. Results Although patients and doctors found InformedTogether acceptable and would recommend that doctors use the decision aid with COPD patients, many patients had difficulty understanding the icon arrays that were used to communicate estimated prognoses and could not articulate the definitions of the two treatment choices—Full Code and Do Not Resuscitate (DNR). Minor usability problems regarding content, links, layout, and consistency were also identified and corresponding recommendations were outlined. In particular, participants suggested including more information about potential changes in quality of life resulting from the alternative advance directives. Some doctor participants thought the decision aid was too long and some thought it may cause nervousness among patients due to the topic area. Conclusions A decision aid for shared advance care planning for severe COPD was found acceptable to most COPD patients and their doctors. However, many patient participants did not demonstrate understanding of the treatment options or prognostic estimates. Many participants endorsed the use of the decision aid between doctors and their patients with COPD, although they desired more information about quality of life. The design must optimize comprehensibility, including revising the presentation of statistical information in the icon array, and feasibility of integration into clinical workflow, including shortening the decision aid. PMID:27025896

Development and Evaluation of Computer-Based Versions of the Decision Board for Early Breast Cancer

DTIC Science & Technology

1999-10-01

develop a decision aid for women with breast cancer. Patient Education and Counselling 1999, 37:283-29 1. 8. Levine MN, Bramwell VH, Pritchard KI...likelihood of their occurrence: often, All patient education cards and a smaller repro- sometimes, or rarely. Information about the results duction of the...choice between two adjuvant chemotherapy regimens: A pilot study to develop a decision aid for women with breast cancer. Patient Education and

Interactive Management and Updating of Spatial Data Bases

NASA Technical Reports Server (NTRS)

French, P.; Taylor, M.

1982-01-01

The decision making process, whether for power plant siting, load forecasting or energy resource planning, invariably involves a blend of analytical methods and judgement. Management decisions can be improved by the implementation of techniques which permit an increased comprehension of results from analytical models. Even where analytical procedures are not required, decisions can be aided by improving the methods used to examine spatially and temporally variant data. How the use of computer aided planning (CAP) programs and the selection of a predominant data structure, can improve the decision making process is discussed.

A dynamic, embodied paradigm to investigate the role of serotonin in decision-making

PubMed Central

Asher, Derrik E.; Craig, Alexis B.; Zaldivar, Andrew; Brewer, Alyssa A.; Krichmar, Jeffrey L.

2013-01-01

Serotonin (5-HT) is a neuromodulator that has been attributed to cost assessment and harm aversion. In this review, we look at the role 5-HT plays in making decisions when subjects are faced with potential harmful or costly outcomes. We review approaches for examining the serotonergic system in decision-making. We introduce our group’s paradigm used to investigate how 5-HT affects decision-making. In particular, our paradigm combines techniques from computational neuroscience, socioeconomic game theory, human–robot interaction, and Bayesian statistics. We will highlight key findings from our previous studies utilizing this paradigm, which helped expand our understanding of 5-HT’s effect on decision-making in relation to cost assessment. Lastly, we propose a cyclic multidisciplinary approach that may aid in addressing the complexity of exploring 5-HT and decision-making by iteratively updating our assumptions and models of the serotonergic system through exhaustive experimentation. PMID:24319413

Development of a Reference Image Collection Library for Histopathology Image Processing, Analysis and Decision Support Systems Research.

PubMed

Kostopoulos, Spiros; Ravazoula, Panagiota; Asvestas, Pantelis; Kalatzis, Ioannis; Xenogiannopoulos, George; Cavouras, Dionisis; Glotsos, Dimitris

2017-06-01

Histopathology image processing, analysis and computer-aided diagnosis have been shown as effective assisting tools towards reliable and intra-/inter-observer invariant decisions in traditional pathology. Especially for cancer patients, decisions need to be as accurate as possible in order to increase the probability of optimal treatment planning. In this study, we propose a new image collection library (HICL-Histology Image Collection Library) comprising 3831 histological images of three different diseases, for fostering research in histopathology image processing, analysis and computer-aided diagnosis. Raw data comprised 93, 116 and 55 cases of brain, breast and laryngeal cancer respectively collected from the archives of the University Hospital of Patras, Greece. The 3831 images were generated from the most representative regions of the pathology, specified by an experienced histopathologist. The HICL Image Collection is free for access under an academic license at http://medisp.bme.teiath.gr/hicl/ . Potential exploitations of the proposed library may span over a board spectrum, such as in image processing to improve visualization, in segmentation for nuclei detection, in decision support systems for second opinion consultations, in statistical analysis for investigation of potential correlations between clinical annotations and imaging findings and, generally, in fostering research on histopathology image processing and analysis. To the best of our knowledge, the HICL constitutes the first attempt towards creation of a reference image collection library in the field of traditional histopathology, publicly and freely available to the scientific community.

Computer modeling of human decision making

NASA Technical Reports Server (NTRS)

Gevarter, William B.

1991-01-01

Models of human decision making are reviewed. Models which treat just the cognitive aspects of human behavior are included as well as models which include motivation. Both models which have associated computer programs, and those that do not, are considered. Since flow diagrams, that assist in constructing computer simulation of such models, were not generally available, such diagrams were constructed and are presented. The result provides a rich source of information, which can aid in construction of more realistic future simulations of human decision making.

Nonlinear phase noise tolerance for coherent optical systems using soft-decision-aided ML carrier phase estimation enhanced with constellation partitioning

NASA Astrophysics Data System (ADS)

Li, Yan; Wu, Mingwei; Du, Xinwei; Xu, Zhuoran; Gurusamy, Mohan; Yu, Changyuan; Kam, Pooi-Yuen

2018-02-01

A novel soft-decision-aided maximum likelihood (SDA-ML) carrier phase estimation method and its simplified version, the decision-aided and soft-decision-aided maximum likelihood (DA-SDA-ML) methods are tested in a nonlinear phase noise-dominant channel. The numerical performance results show that both the SDA-ML and DA-SDA-ML methods outperform the conventional DA-ML in systems with constant-amplitude modulation formats. In addition, modified algorithms based on constellation partitioning are proposed. With partitioning, the modified SDA-ML and DA-SDA-ML are shown to be useful for compensating the nonlinear phase noise in multi-level modulation systems.

Human Factors in Automated and Robotic Space Systems: Proceedings of a symposium. Part 2

NASA Technical Reports Server (NTRS)

1987-01-01

Human factors research likely to produce results applicable to the development of a NASA space station is discussed. The particular sessions covered in Part 2 include: (1) computer aided monitoring and decision making; (2) telepresence and supervisory control; (3) social factors in productivity and performance; and (4) the human role in space systems. Papers from each subject area are reproduced and the discussions from each area are summarized.

Advance care planning for patients with amyotrophic lateral sclerosis.

PubMed

Levi, Benjamin H; Simmons, Zachary; Hanna, Courtney; Brothers, Allyson; Lehman, Erik; Farace, Elana; Bain, Megan; Stewart, Renee; Green, Michael J

2017-08-01

To determine whether an advance care planning (ACP) decision-aid could improve communication about end-of-life treatment wishes between patients with amyotrophic lateral sclerosis (ALS) and their clinicians. Forty-four patients with ALS (>21, English-speaking, without dementia) engaged in ACP using an interactive computer based decision-aid. Before participants completed the intervention, and again three months later, their clinicians reviewed three clinical vignettes, and made treatment decisions (n = 18) for patients. After patients indicated their agreement with the team's decisions, concordance was calculated. The mean concordance between patient wishes and the clinical team decisions was significantly higher post-intervention (post = 91.9%, 95% CI = 87.8, 96.1, vs. pre = 52.4%, 95% CI = 41.9, 62.9; p <0.001). Clinical team members reported greater confidence that their decisions accurately represented each patient's wishes post-intervention (mean = 6.5) compared to pre-intervention (mean = 3.3, 1 = low, 10 = high, p <0.001). Patients reported high satisfaction (mean = 26.4, SD = 3.2; 6 = low, 30 = high) and low decisional conflict (mean = 28.8, SD = 8.2; 20 = low, 80 = high) with decisions about end-of-life care, and high satisfaction with the decision-aid (mean = 52.7, SD = 5.7, 20 = low, 60 = high). Patient knowledge regarding ACP increased post-intervention (pre = 47.8% correct responses vs. post = 66.3%; p <0.001) without adversely affecting patient anxiety or self-determination. A computer based ACP decision-aid can significantly improve clinicians' understanding of ALS patients' wishes with regard to end-of-life medical care.

Computer-Aided Diagnosis for Breast Ultrasound Using Computerized BI-RADS Features and Machine Learning Methods.

PubMed

Shan, Juan; Alam, S Kaisar; Garra, Brian; Zhang, Yingtao; Ahmed, Tahira

2016-04-01

This work identifies effective computable features from the Breast Imaging Reporting and Data System (BI-RADS), to develop a computer-aided diagnosis (CAD) system for breast ultrasound. Computerized features corresponding to ultrasound BI-RADs categories were designed and tested using a database of 283 pathology-proven benign and malignant lesions. Features were selected based on classification performance using a "bottom-up" approach for different machine learning methods, including decision tree, artificial neural network, random forest and support vector machine. Using 10-fold cross-validation on the database of 283 cases, the highest area under the receiver operating characteristic (ROC) curve (AUC) was 0.84 from a support vector machine with 77.7% overall accuracy; the highest overall accuracy, 78.5%, was from a random forest with the AUC 0.83. Lesion margin and orientation were optimum features common to all of the different machine learning methods. These features can be used in CAD systems to help distinguish benign from worrisome lesions. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. All rights reserved.

Evaluation of Microcomputer-Based Operation and Maintenance Management Systems for Army Water/Wastewater Treatment Plant Operation.

DTIC Science & Technology

1986-07-01

COMPUTER-AIDED OPERATION MANAGEMENT SYSTEM ................. 29 Functions of an Off-Line Computer-Aided Operation Management System Applications of...System Comparisons 85 DISTRIBUTION 5V J. • 0. FIGURES Number Page 1 Hardware Components 21 2 Basic Functions of a Computer-Aided Operation Management System...Plant Visits 26 4 Computer-Aided Operation Management Systems Reviewed for Analysis of Basic Functions 29 5 Progress of Software System Installation and

The neglected topic: presentation of cost information in patient decision AIDS.

PubMed

Blumenthal-Barby, J S; Robinson, Emily; Cantor, Scott B; Naik, Aanand D; Russell, Heidi Voelker; Volk, Robert J

2015-05-01

Costs are an important component of patients' decision making, but a comparatively underemphasized aspect of formal shared decision making. We hypothesized that decision aids also avoid discussion of costs, despite their being tools designed to facilitate shared decision making about patient-centered outcomes. We sought to define the frequency of cost-related information and identify the common modes of presenting cost and cost-related information in the 290 decision aids catalogued in the Ottawa Hospital Research Institute's Decision Aid Library Inventory (DALI) system. We found that 56% (n = 161) of the decision aids mentioned cost in some way, but only 13% (n = 37) gave a specific price or range of prices. We identified 9 different ways in which cost was mentioned. The most common approach was as a "pro" of one of the treatment options (e.g., "you avoid the cost of medication"). Of the 37 decision aids that gave specific prices or ranges of prices for treatment options, only 2 were about surgery decisions despite the fact that surgery decision aids were the most common. Our findings suggest that presentation of cost information in decision aids is highly variable. Evidence-based guidelines should be developed by the International Patient Decision Aid Standards (IPDAS) Collaboration. © The Author(s) 2015.

Selection of examples in case-based computer-aided decision systems

PubMed Central

Mazurowski, Maciej A.; Zurada, Jacek M.; Tourassi, Georgia D.

2013-01-01

Case-based computer-aided decision (CB-CAD) systems rely on a database of previously stored, known examples when classifying new, incoming queries. Such systems can be particularly useful since they do not need retraining every time a new example is deposited in the case base. The adaptive nature of case-based systems is well suited to the current trend of continuously expanding digital databases in the medical domain. To maintain efficiency, however, such systems need sophisticated strategies to effectively manage the available evidence database. In this paper, we discuss the general problem of building an evidence database by selecting the most useful examples to store while satisfying existing storage requirements. We evaluate three intelligent techniques for this purpose: genetic algorithm-based selection, greedy selection and random mutation hill climbing. These techniques are compared to a random selection strategy used as the baseline. The study is performed with a previously presented CB-CAD system applied for false positive reduction in screening mammograms. The experimental evaluation shows that when the development goal is to maximize the system’s diagnostic performance, the intelligent techniques are able to reduce the size of the evidence database to 37% of the original database by eliminating superfluous and/or detrimental examples while at the same time significantly improving the CAD system’s performance. Furthermore, if the case-base size is a main concern, the total number of examples stored in the system can be reduced to only 2–4% of the original database without a decrease in the diagnostic performance. Comparison of the techniques shows that random mutation hill climbing provides the best balance between the diagnostic performance and computational efficiency when building the evidence database of the CB-CAD system. PMID:18854606

Multiple neural network approaches to clinical expert systems

NASA Astrophysics Data System (ADS)

Stubbs, Derek F.

1990-08-01

We briefly review the concept of computer aided medical diagnosis and more extensively review the the existing literature on neural network applications in the field. Neural networks can function as simple expert systems for diagnosis or prognosis. Using a public database we develop a neural network for the diagnosis of a major presenting symptom while discussing the development process and possible approaches. MEDICAL EXPERTS SYSTEMS COMPUTER AIDED DIAGNOSIS Biomedicine is an incredibly diverse and multidisciplinary field and it is not surprising that neural networks with their many applications are finding more and more applications in the highly non-linear field of biomedicine. I want to concentrate on neural networks as medical expert systems for clinical diagnosis or prognosis. Expert Systems started out as a set of computerized " ifthen" rules. Everything was reduced to boolean logic and the promised land of computer experts was said to be in sight. It never came. Why? First the computer code explodes as the number of " ifs" increases. All the " ifs" have to interact. Second experts are not very good at reducing expertise to language. It turns out that experts recognize patterns and have non-verbal left-brain intuition decision processes. Third learning by example rather than learning by rule is the way natural brains works and making computers work by rule-learning is hideously labor intensive. Neural networks can learn from example. They learn the results

RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

ERIC Educational Resources Information Center

Stewart, John Christopher

Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

Apply creative thinking of decision support in electrical nursing record.

PubMed

Hao, Angelica Te-Hui; Hsu, Chien-Yeh; Li-Fang, Huang; Jian, Wen-Shan; Wu, Li-Bin; Kao, Ching-Chiu; Lu, Mei-Show; Chang, Her-Kung

2006-01-01

The nursing process consists of five interrelated steps: assessment, diagnosis, planning, intervention, and evaluation. In the nursing process, the nurse collects a great deal of data and information. The amount of data and information may exceed the amount the nurse can process efficiently and correctly. Thus, the nurse needs assistance to become proficient in the planning of nursing care, due to the difficulty of simultaneously processing a large set of information. Computer systems are viewed as tools to expand the capabilities of the nurse's mind. Using computer technology to support clinicians' decision making may provide high-quality, patient-centered, and efficient healthcare. Although some existing nursing information systems aid in the nursing process, they only provide the most fundamental decision support--i.e., standard care plans associated with common nursing diagnoses. Such a computerized decision support system helps the nurse develop a care plan step-by-step. But it does not assist the nurse in the decision-making process. The decision process about how to generate nursing diagnoses from data and how to individualize the care plans still reminds of the nurse. The purpose of this study is to develop a pilot structure in electronic nursing record system integrated with international nursing standard for improving the proficiency and accuracy of plan of care in clinical pathway process. The proposed pilot systems not only assist both student nurses and nurses who are novice in nursing practice, but also experts who need to work in a practice area which they are not familiar with.

A review of fuzzy cognitive maps in medicine: Taxonomy, methods, and applications.

PubMed

Amirkhani, Abdollah; Papageorgiou, Elpiniki I; Mohseni, Akram; Mosavi, Mohammad R

2017-04-01

A high percentage of medical errors, committed because of physician's lack of experience, huge volume of data to be analyzed, and inaccessibility to medical records of previous patients, can be reduced using computer-aided techniques. Therefore, designing more efficient medical decision-support systems (MDSSs) to assist physicians in decision-making is crucially important. Through combining the properties of fuzzy logic and neural networks, fuzzy cognitive maps (FCMs) are among the latest, most efficient, and strongest artificial intelligence techniques for modeling complex systems. This review study is conducted to identify different FCM structures used in MDSS designs. The best structure for each medical application can be introduced by studying the properties of FCM structures. This paper surveys the most important decision- making methods and applications of FCMs in the medical field in recent years. To investigate the efficiency and capability of different FCM models in designing MDSSs, medical applications are categorized into four key areas: decision-making, diagnosis, prediction, and classification. Also, various diagnosis and decision support problems addressed by FCMs in recent years are reviewed with the goal of introducing different types of FCMs and determining their contribution to the improvements made in the fields of medical diagnosis and treatment. In this survey, a general trend for future studies in this field is provided by analyzing various FCM structures used for medical purposes, and the results from each category. Due to the unique specifications of FCMs in integrating human knowledge and experience with computer-aided techniques, they are among practical instruments for MDSS design. In the not too distant future, they will have a significant role in medical sciences. Copyright © 2017 Elsevier B.V. All rights reserved.

The Feasibility of Classifying Breast Masses Using a Computer-Assisted Diagnosis (CAD) System Based on Ultrasound Elastography and BI-RADS Lexicon.

PubMed

Fleury, Eduardo F C; Gianini, Ana Claudia; Marcomini, Karem; Oliveira, Vilmar

2018-01-01

To determine the applicability of a computer-aided diagnostic system strain elastography system for the classification of breast masses diagnosed by ultrasound and scored using the criteria proposed by the breast imaging and reporting data system ultrasound lexicon and to determine the diagnostic accuracy and interobserver variability. This prospective study was conducted between March 1, 2016, and May 30, 2016. A total of 83 breast masses subjected to percutaneous biopsy were included. Ultrasound elastography images before biopsy were interpreted by 3 radiologists with and without the aid of computer-aided diagnostic system for strain elastography. The parameters evaluated by each radiologist results were sensitivity, specificity, and diagnostic accuracy, with and without computer-aided diagnostic system for strain elastography. Interobserver variability was assessed using a weighted κ test and an intraclass correlation coefficient. The areas under the receiver operating characteristic curves were also calculated. The areas under the receiver operating characteristic curve were 0.835, 0.801, and 0.765 for readers 1, 2, and 3, respectively, without computer-aided diagnostic system for strain elastography, and 0.900, 0.926, and 0.868, respectively, with computer-aided diagnostic system for strain elastography. The intraclass correlation coefficient between the 3 readers was 0.6713 without computer-aided diagnostic system for strain elastography and 0.811 with computer-aided diagnostic system for strain elastography. The proposed computer-aided diagnostic system for strain elastography system has the potential to improve the diagnostic performance of radiologists in breast examination using ultrasound associated with elastography.

A computer-aided diagnostic system for kidney disease

PubMed Central

Jahantigh, Farzad Firouzi; Malmir, Behnam; Avilaq, Behzad Aslani

2017-01-01

Background Disease diagnosis is complicated since patients may demonstrate similar symptoms but physician may diagnose different diseases. There are a few number of investigations aimed to create a fuzzy expert system, as a computer aided system for disease diagnosis. Methods In this research, a cross-sectional descriptive study conducted in a kidney clinic in Tehran, Iran in 2012. Medical diagnosis fuzzy rules applied, and a set of symptoms related to the set of considered diseases defined. The input case to be diagnosed defined by assigning a fuzzy value to each symptom and then three physicians asked about each suspected diseases. Then comments of those three physicians summarized for each disease. The fuzzy inference applied to obtain a decision fuzzy set for each disease, and crisp decision values attained to determine the certainty of existence for each disease. Results Results indicated that, in the diagnosis of seven cases of kidney disease by examining 21 indicators using fuzzy expert system, kidney stone disease with 63% certainty was the most probable, renal tubular was at the lowest level with 15%, and other kidney diseases were at the other levels. The most remarkable finding of this study was that results of kidney disease diagnosis (e.g., kidney stone) via fuzzy expert system were fully compatible with those of kidney physicians. Conclusion The proposed fuzzy expert system is a valid, reliable, and flexible instrument to diagnose several typical input cases. The developed system decreases the effort of initial physical checking and manual feeding of input symptoms. PMID:28392995

A computer-aided diagnostic system for kidney disease.

PubMed

Jahantigh, Farzad Firouzi; Malmir, Behnam; Avilaq, Behzad Aslani

2017-03-01

Disease diagnosis is complicated since patients may demonstrate similar symptoms but physician may diagnose different diseases. There are a few number of investigations aimed to create a fuzzy expert system, as a computer aided system for disease diagnosis. In this research, a cross-sectional descriptive study conducted in a kidney clinic in Tehran, Iran in 2012. Medical diagnosis fuzzy rules applied, and a set of symptoms related to the set of considered diseases defined. The input case to be diagnosed defined by assigning a fuzzy value to each symptom and then three physicians asked about each suspected diseases. Then comments of those three physicians summarized for each disease. The fuzzy inference applied to obtain a decision fuzzy set for each disease, and crisp decision values attained to determine the certainty of existence for each disease. Results indicated that, in the diagnosis of seven cases of kidney disease by examining 21 indicators using fuzzy expert system, kidney stone disease with 63% certainty was the most probable, renal tubular was at the lowest level with 15%, and other kidney diseases were at the other levels. The most remarkable finding of this study was that results of kidney disease diagnosis (e.g., kidney stone) via fuzzy expert system were fully compatible with those of kidney physicians. The proposed fuzzy expert system is a valid, reliable, and flexible instrument to diagnose several typical input cases. The developed system decreases the effort of initial physical checking and manual feeding of input symptoms.

The Burn Medical Assistant: Developing Machine Learning Algorithms to Aid in the Estimation of Burn Wound Size

DTIC Science & Technology

2017-10-01

hypothesis that a computer machine learning algorithm can analyze and classify burn injures using multispectral imaging within 5% of an expert clinician...morbidity. In response to these challenges, the USAISR developed and obtained FDA 510(k) clearance of the Burn Navigator™, a computer decision support... computer decision support software (CDSS), can significantly change the CDSS algorithm’s recommendations and thus the total fluid administered to a

Histological Image Feature Mining Reveals Emergent Diagnostic Properties for Renal Cancer

PubMed Central

Kothari, Sonal; Phan, John H.; Young, Andrew N.; Wang, May D.

2016-01-01

Computer-aided histological image classification systems are important for making objective and timely cancer diagnostic decisions. These systems use combinations of image features that quantify a variety of image properties. Because researchers tend to validate their diagnostic systems on specific cancer endpoints, it is difficult to predict which image features will perform well given a new cancer endpoint. In this paper, we define a comprehensive set of common image features (consisting of 12 distinct feature subsets) that quantify a variety of image properties. We use a data-mining approach to determine which feature subsets and image properties emerge as part of an “optimal” diagnostic model when applied to specific cancer endpoints. Our goal is to assess the performance of such comprehensive image feature sets for application to a wide variety of diagnostic problems. We perform this study on 12 endpoints including 6 renal tumor subtype endpoints and 6 renal cancer grade endpoints. Keywords-histology, image mining, computer-aided diagnosis PMID:28163980

Counter Unmanned Aerial System Decision-Aid Logic Process (C-UAS DALP)

DTIC Science & Technology

decision -aid or logic process that bridges the middle elements of the kill... of use, location, general logic process , and reference mission. This is the framework for the IDEF0 functional architecture diagrams, decision -aid diagrams, logic process , and modeling and simulation....chain between detection to countermeasure response. This capstone project creates the logic for a decision process that transitions from the

Wavelet Entropy and Directed Acyclic Graph Support Vector Machine for Detection of Patients with Unilateral Hearing Loss in MRI Scanning

PubMed Central

Wang, Shuihua; Yang, Ming; Du, Sidan; Yang, Jiquan; Liu, Bin; Gorriz, Juan M.; Ramírez, Javier; Yuan, Ti-Fei; Zhang, Yudong

2016-01-01

Highlights We develop computer-aided diagnosis system for unilateral hearing loss detection in structural magnetic resonance imaging.Wavelet entropy is introduced to extract image global features from brain images. Directed acyclic graph is employed to endow support vector machine an ability to handle multi-class problems.The developed computer-aided diagnosis system achieves an overall accuracy of 95.1% for this three-class problem of differentiating left-sided and right-sided hearing loss from healthy controls. Aim: Sensorineural hearing loss (SNHL) is correlated to many neurodegenerative disease. Now more and more computer vision based methods are using to detect it in an automatic way. Materials: We have in total 49 subjects, scanned by 3.0T MRI (Siemens Medical Solutions, Erlangen, Germany). The subjects contain 14 patients with right-sided hearing loss (RHL), 15 patients with left-sided hearing loss (LHL), and 20 healthy controls (HC). Method: We treat this as a three-class classification problem: RHL, LHL, and HC. Wavelet entropy (WE) was selected from the magnetic resonance images of each subjects, and then submitted to a directed acyclic graph support vector machine (DAG-SVM). Results: The 10 repetition results of 10-fold cross validation shows 3-level decomposition will yield an overall accuracy of 95.10% for this three-class classification problem, higher than feedforward neural network, decision tree, and naive Bayesian classifier. Conclusions: This computer-aided diagnosis system is promising. We hope this study can attract more computer vision method for detecting hearing loss. PMID:27807415

Wavelet Entropy and Directed Acyclic Graph Support Vector Machine for Detection of Patients with Unilateral Hearing Loss in MRI Scanning.

PubMed

Wang, Shuihua; Yang, Ming; Du, Sidan; Yang, Jiquan; Liu, Bin; Gorriz, Juan M; Ramírez, Javier; Yuan, Ti-Fei; Zhang, Yudong

2016-01-01

Highlights We develop computer-aided diagnosis system for unilateral hearing loss detection in structural magnetic resonance imaging.Wavelet entropy is introduced to extract image global features from brain images. Directed acyclic graph is employed to endow support vector machine an ability to handle multi-class problems.The developed computer-aided diagnosis system achieves an overall accuracy of 95.1% for this three-class problem of differentiating left-sided and right-sided hearing loss from healthy controls. Aim: Sensorineural hearing loss (SNHL) is correlated to many neurodegenerative disease. Now more and more computer vision based methods are using to detect it in an automatic way. Materials: We have in total 49 subjects, scanned by 3.0T MRI (Siemens Medical Solutions, Erlangen, Germany). The subjects contain 14 patients with right-sided hearing loss (RHL), 15 patients with left-sided hearing loss (LHL), and 20 healthy controls (HC). Method: We treat this as a three-class classification problem: RHL, LHL, and HC. Wavelet entropy (WE) was selected from the magnetic resonance images of each subjects, and then submitted to a directed acyclic graph support vector machine (DAG-SVM). Results: The 10 repetition results of 10-fold cross validation shows 3-level decomposition will yield an overall accuracy of 95.10% for this three-class classification problem, higher than feedforward neural network, decision tree, and naive Bayesian classifier. Conclusions: This computer-aided diagnosis system is promising. We hope this study can attract more computer vision method for detecting hearing loss.

Deep learning aided decision support for pulmonary nodules diagnosing: a review.

PubMed

Yang, Yixin; Feng, Xiaoyi; Chi, Wenhao; Li, Zhengyang; Duan, Wenzhe; Liu, Haiping; Liang, Wenhua; Wang, Wei; Chen, Ping; He, Jianxing; Liu, Bo

2018-04-01

Deep learning techniques have recently emerged as promising decision supporting approaches to automatically analyze medical images for different clinical diagnosing purposes. Diagnosing of pulmonary nodules by using computer-assisted diagnosing has received considerable theoretical, computational, and empirical research work, and considerable methods have been developed for detection and classification of pulmonary nodules on different formats of images including chest radiographs, computed tomography (CT), and positron emission tomography in the past five decades. The recent remarkable and significant progress in deep learning for pulmonary nodules achieved in both academia and the industry has demonstrated that deep learning techniques seem to be promising alternative decision support schemes to effectively tackle the central issues in pulmonary nodules diagnosing, including feature extraction, nodule detection, false-positive reduction, and benign-malignant classification for the huge volume of chest scan data. The main goal of this investigation is to provide a comprehensive state-of-the-art review of the deep learning aided decision support for pulmonary nodules diagnosing. As far as the authors know, this is the first time that a review is devoted exclusively to deep learning techniques for pulmonary nodules diagnosing.

Employment Opportunities for the Handicapped in Programmable Automation.

ERIC Educational Resources Information Center

Swift, Richard; Leneway, Robert

A Computer Integrated Manufacturing System may make it possible for severely disabled people to custom design, machine, and manufacture either wood or metal parts. Programmable automation merges computer aided design, computer aided manufacturing, computer aided engineering, and computer integrated manufacturing systems with automated production…

The limits of intelligence in design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Papamichael, K.; Protzen, J.P.

1993-05-01

A new, comprehensive design theory is presented, applicable to all design domains such as engineering and industrial design, architecture, city and regional planning, and, in general, any goal-oriented activity that involves decision making. The design process is analyzed into fundamental activities that are characterized with respect to the nature of knowledge requirements and the degree to which they can be specified and delegated to others, in general, and to computers in particular. The characterization of design problems as ``wicked,`` or ``ill-defined,`` design has been understood as a rational activity, that is ``thinking before acting.`` The new theory presented in thismore » paper suggests that design is ``thinking and feeling while acting,`` supporting the position that design is only partially rational. Intelligence, ``natural`` or ``artificial,`` is only one of two requirements for design, the other being emotions. Design decisions are only partially inferred, that is, they are not entirely the product of reasoning. Rather, design decisions are based on judgment that requires the notion of ``good`` and ``bad,`` which is attributed to feelings, rather than thoughts. The presentation of the design theory extends to the implications associated with the limits of intelligence in design, which, in turn, become constraints on the potential role of computers in design. Many of the current development efforts in computer-aided design violate these constraints, especially in the implementation of expert systems and multi-criterion evaluation models. These violations are identified and discussed in detail. Finally, specific areas for further research and development in computer-aided design are presented and discussed.« less

Decision making technical support study for the US Army's Chemical Stockpile Disposal Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, D.L.; Dobson, J.E.

1990-08-01

This report examines the adequacy of current command and control systems designed to make timely decisions that would enable sufficient warning and protective response to an accident at the Edgewood area of Aberdeen Proving Ground (APG), Maryland, and at Pine Bluff Arsenal (PBA), Arkansas. Institutional procedures designed to facilitate rapid accident assessment, characterization, warning, notification, and response after the onset of an emergency and computer-assisted decision-making aids designed to provide salient information to on- and-off-post emergency responders are examined. The character of emergency decision making at APG and PBA, as well as potential needs for improvements to decision-making practices, procedures,more » and automated decision-support systems (ADSSs), are described and recommendations are offered to guide equipment acquisition and improve on- and off-post command and control relationships. We recommend that (1) a continued effort be made to integrate on- and off-post command control, and decision-making procedures to permit rapid decision making; (2) the pathways for alert and notification among on- and off-post officials be improved and that responsibilities and chain of command among off-post agencies be clarified; (3) greater attention be given to organizational and social context factors that affect the adequacy of response and the likelihood that decision-making systems will work as intended; and (4) faster improvements be made to on-post ADSSs being developed at APG and PBA, which hold considerable promise for depicting vast amounts of information. Phased development and procurement of computer-assisted decision-making tools should be undertaken to balance immediate needs against available resources and to ensure flexibility, equity among sites, and compatibility among on- and off-post systems. 112 refs., 6 tabs.« less

Impact of Educational and Patient Decision Aids on Decisional Conflict Associated with Total Knee Arthroplasty

PubMed Central

de Achaval, Sofia; Fraenkel, Liana; Volk, Robert J.; Cox, Vanessa; Suarez-Almazor, Maria E.

2012-01-01

Our objective was to examine the impact of a videobooklet patient decision aid supplemented by an interactive values clarification exercise on decisional conflict in patients with knee osteoarthritis (OA) considering total knee arthroplasy. 208 patients participated in the study (mean age 63 years; 68% female; 66% White). Participants were randomized to 1 of 3 groups: (1) Educational booklet on OA management (control); (2) Patient decision aid (videobooklet) on OA management; and (3) Patient decision aid (videobooklet) + adaptive conjoint analysis ACA tool. The ACA tool enables patients to consider competing attributes (i.e. specific risks/benefits) by asking them to rate a series of paired-comparisons. The primary outcome was the decisional conflict scale ranging from 0 to 100. Differences between groups were analyzed using analysis of variance (ANOVA) and Tukey's honestly significant difference tests. Overall, decisional conflict decreased significantly in all groups (p<0.05). The largest reduction in decisional conflict was observed for participants in the videobooklet decision aid group (21 points). Statistically significant differences in pre vs. post-intervention total scores favored the videobooklet group compared to the control group (21 vs. 10) and to the videobooklet plus ACA group (21 vs. 14; p<0.001). Changes in the decisional conflict score for the control compared to the videobooklet decision aid + ACA group were not significantly different. In our study, an audiovisual patient decision aid decreased decisional conflict more than printed material alone, or than the addition of a more complex computer-based ACA tool requiring more intense cognitive involvement and explicit value choices. PMID:21954198

HOLISTIC APPROACH TO ENVIRONMENTAL MANAGEMENT OF MUNICIPAL SOLID WASTE

EPA Science Inventory

The paper presents results from the application of a new municipal solid waste (MSW) management planning aid to EPA's new facility in the Research Triangle Park, NC. This planning aid, or decision support tool, is computer software that analyzes the cost and environmental impact ...

Medical communication and technology: a video-based process study of the use of decision aids in primary care consultations.

PubMed

Kaner, Eileen; Heaven, Ben; Rapley, Tim; Murtagh, Madeleine; Graham, Ruth; Thomson, Richard; May, Carl

2007-01-10

Much of the research on decision-making in health care has focused on consultation outcomes. Less is known about the process by which clinicians and patients come to a treatment decision. This study aimed to quantitatively describe the behaviour shown by doctors and patients during primary care consultations when three types of decision aids were used to promote treatment decision-making in a randomised controlled trial. A video-based study set in an efficacy trial which compared the use of paper-based guidelines (control) with two forms of computer-based decision aids (implicit and explicit versions of DARTS II). Treatment decision concerned warfarin anti-coagulation to reduce the risk of stroke in older patients with atrial fibrillation. Twenty nine consultations were video-recorded. A ten-minute 'slice' of the consultation was sampled for detailed content analysis using existing interaction analysis protocols for verbal behaviour and ethological techniques for non-verbal behaviour. Median consultation times (quartiles) differed significantly depending on the technology used. Paper-based guidelines took 21 (19-26) minutes to work through compared to 31 (16-41) minutes for the implicit tool; and 44 (39-55) minutes for the explicit tool. In the ten minutes immediately preceding the decision point, GPs dominated the conversation, accounting for 64% (58-66%) of all utterances and this trend was similar across all three arms of the trial. Information-giving was the most frequent activity for both GPs and patients, although GPs did this at twice the rate compared to patients and at higher rates in consultations involving computerised decision aids. GPs' language was highly technically focused and just 7% of their conversation was socio-emotional in content; this was half the socio-emotional content shown by patients (15%). However, frequent head nodding and a close mirroring in the direction of eye-gaze suggested that both parties were active participants in the conversation Irrespective of the arm of the trial, both patients' and GPs' behaviour showed that they were reciprocally engaged in these consultations. However, even in consultations aimed at promoting shared decision-making, GPs' were verbally dominant, and they worked primarily as information providers for patients. In addition, computer-based decision aids significantly prolonged the consultations, particularly the later phases. These data suggest that decision aids may not lead to more 'sharing' in treatment decision-making and that, in their current form, they may take too long to negotiate for use in routine primary care.

Delivering patient decision aids on the Internet: definitions, theories, current evidence, and emerging research areas

PubMed Central

2013-01-01

Background In 2005, the International Patient Decision Aids Standards Collaboration identified twelve quality dimensions to guide assessment of patient decision aids. One dimension—the delivery of patient decision aids on the Internet—is relevant when the Internet is used to provide some or all components of a patient decision aid. Building on the original background chapter, this paper provides an updated definition for this dimension, outlines a theoretical rationale, describes current evidence, and discusses emerging research areas. Methods An international, multidisciplinary panel of authors examined the relevant theoretical literature and empirical evidence through 2012. Results The updated definition distinguishes Internet-delivery of patient decision aids from online health information and clinical practice guidelines. Theories in cognitive psychology, decision psychology, communication, and education support the value of Internet features for providing interactive information and deliberative support. Dissemination and implementation theories support Internet-delivery for providing the right information (rapidly updated), to the right person (tailored), at the right time (the appropriate point in the decision making process). Additional efforts are needed to integrate the theoretical rationale and empirical evidence from health technology perspectives, such as consumer health informatics, user experience design, and human-computer interaction. Despite Internet usage ranging from 74% to 85% in developed countries and 80% of users searching for health information, it is unknown how many individuals specifically seek patient decision aids on the Internet. Among the 86 randomized controlled trials in the 2011 Cochrane Collaboration’s review of patient decision aids, only four studies focused on Internet-delivery. Given the limited number of published studies, this paper particularly focused on identifying gaps in the empirical evidence base and identifying emerging areas of research. Conclusions As of 2012, the updated theoretical rationale and emerging evidence suggest potential benefits to delivering patient decision aids on the Internet. However, additional research is needed to identify best practices and quality metrics for Internet-based development, evaluation, and dissemination, particularly in the areas of interactivity, multimedia components, socially-generated information, and implementation strategies. PMID:24625064

Fundamental Concepts of Digital Image Processing

DOE R&D Accomplishments Database

Twogood, R. E.

1983-03-01

The field of a digital-image processing has experienced dramatic growth and increasingly widespread applicability in recent years. Fortunately, advances in computer technology have kept pace with the rapid growth in volume of image data in these and other applications. Digital image processing has become economical in many fields of research and in industrial and military applications. While each application has requirements unique from the others, all are concerned with faster, cheaper, more accurate, and more extensive computation. The trend is toward real-time and interactive operations, where the user of the system obtains preliminary results within a short enough time that the next decision can be made by the human processor without loss of concentration on the task at hand. An example of this is the obtaining of two-dimensional (2-D) computer-aided tomography (CAT) images. A medical decision might be made while the patient is still under observation rather than days later.

Entertainment education for breast cancer surgery decisions: a randomized trial among patients with low health literacy.

PubMed

Jibaja-Weiss, Maria L; Volk, Robert J; Granchi, Thomas S; Neff, Nancy E; Robinson, Emily K; Spann, Stephen J; Aoki, Noriaki; Friedman, Lois C; Beck, J Robert

2011-07-01

To evaluate an entertainment-based patient decision aid for early stage breast cancer surgery in low health literacy patients. Newly diagnosed female patients with early stage breast cancer from two public hospitals were randomized to receive an entertainment-based decision aid for breast cancer treatment along with usual care (intervention arm) or to receive usual care only (control arm). Pre-decision (baseline), pre-surgery, and 1-year follow-up assessments were conducted. Patients assigned to the intervention arm of the study were more likely than the controls to choose mastectomy rather than breast-conserving surgery; however, they appeared better informed and clearer about their surgical options than women assigned to the control group. No differences in satisfaction with the surgical decision or the decision-making process were observed between the patients who viewed the intervention and those assigned to the control group. Entertainment education may be a desirable strategy for informing lower health literate women about breast cancer surgery options. Incorporating patient decision aids, particularly computer-based decision aids, into standard clinical practice remains a challenge; however, patients may be directed to view programs at home or at public locations (e.g., libraries, community centers). Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Proposal for Development of EBM-CDSS (Evidence-Based Clinical Decision Support System) to Aid Prognostication in Terminally Ill Patients

DTIC Science & Technology

2011-10-01

inconsistency in the representation of the dataset. RST provides a mathematical tool for representing and reasoning about vagueness and inconsistency. Its...use of various mathematical , statistical and soft computing methodologies with the objective of identifying meaningful relationships between condition...Evidence-based Medicine and Health Outcomes Research, University of South Florida, Tampa, FL 2Department of Mathematics , Indiana University Northwest, Gary

Integration of a CAD System Into an MDO Framework

NASA Technical Reports Server (NTRS)

Townsend, J. C.; Samareh, J. A.; Weston, R. P.; Zorumski, W. E.

1998-01-01

NASA Langley has developed a heterogeneous distributed computing environment, called the Framework for Inter-disciplinary Design Optimization, or FIDO. Its purpose has been to demonstrate framework technical feasibility and usefulness for optimizing the preliminary design of complex systems and to provide a working environment for testing optimization schemes. Its initial implementation has been for a simplified model of preliminary design of a high-speed civil transport. Upgrades being considered for the FIDO system include a more complete geometry description, required by high-fidelity aerodynamics and structures codes and based on a commercial Computer Aided Design (CAD) system. This report presents the philosophy behind some of the decisions that have shaped the FIDO system and gives a brief case study of the problems and successes encountered in integrating a CAD system into the FEDO framework.

Workload-Adaptive Human Interface to Aid Robust Decision Making in Human-System Interface. Year 1 Report

DTIC Science & Technology

2014-04-30

performance is to create a computational system to mimic human game-play patterns. The objective of this study is to see to what extent we can...estimates as a function of task load. We conducted a pair of studies towards’ this end. In a first study , described in detail in Appendix D...could inform a system as to the relative workload of a user. In a second study , described in detail in Appendix E, participants were exposed to a 40

A quantitative method for evaluating alternatives. [aid to decision making

NASA Technical Reports Server (NTRS)

Forthofer, M. J.

1981-01-01

When faced with choosing between alternatives, people tend to use a number of criteria (often subjective, rather than objective) to decide which is the best alternative for them given their unique situation. The subjectivity inherent in the decision-making process can be reduced by the definition and use of a quantitative method for evaluating alternatives. This type of method can help decision makers achieve degree of uniformity and completeness in the evaluation process, as well as an increased sensitivity to the factors involved. Additional side-effects are better documentation and visibility of the rationale behind the resulting decisions. General guidelines for defining a quantitative method are presented and a particular method (called 'hierarchical weighted average') is defined and applied to the evaluation of design alternatives for a hypothetical computer system capability.

INCOMMANDS TDP: Development of Decision Aid Implementation Guidance for the INCOMMANDS Human Factors Design and Evaluation Guide (Elaboration des Directives Relatives a la Mise en Oeuvre de l’Aide a la Decision Pour le Guide de Conception et d’evaluation Tenant Compte des Facteurs Humains - INCOMMANDS)

DTIC Science & Technology

2007-05-01

information. Aviation Human-Computer Interface (AHCI) Style Guide. (1998). Report Number 64201-97U/61223. Prepared by Veridian, Veda Operations The...Prepared by Veridian, Veda Operations. Banbury, S., Dudfield, H. Hoermann, H. J., and Soll, H. (in press). FASA: Development and validation of a scale

Do personal stories make patient decision aids more effective? A critical review of theory and evidence

PubMed Central

2013-01-01

Background Patient decision aids support people to make informed decisions between healthcare options. Personal stories provide illustrative examples of others’ experiences and are seen as a useful way to communicate information about health and illness. Evidence indicates that providing information within personal stories affects the judgments and values people have, and the choices they make, differentially from facts presented in non-narrative prose. It is unclear if including narrative communications within patient decision aids enhances their effectiveness to support people to make informed decisions. Methods A survey of primary empirical research employing a systematic review method investigated the effect of patient decision aids with or without a personal story on people’s healthcare judgements and decisions. Searches were carried out between 2005-2012 of electronic databases (Medline, PsycINFO), and reference lists of identified articles, review articles, and key authors. A narrative analysis described and synthesised findings. Results Of 734 citations identified, 11 were included describing 13 studies. All studies found participants’ judgments and/or decisions differed depending on whether or not their decision aid included a patient story. Knowledge was equally facilitated when the decision aids with and without stories had similar information content. Story-enhanced aids may help people recall information over time and/or their motivation to engage with health information. Personal stories affected both “system 1” (e.g., less counterfactual reasoning, more emotional reactions and perceptions) and “system 2” (e.g., more perceived deliberative decision making, more stable evaluations over time) decision-making strategies. Findings exploring associations with narrative communications, decision quality measures, and different levels of literacy and numeracy were mixed. The pattern of findings was similar for both experimental and real-world studies. Conclusions There is insufficient evidence that adding personal stories to decision aids increases their effectiveness to support people’s informed decision making. More rigorous research is required to elicit evidence about the type of personal story that a) encourages people to make more reasoned decisions, b) discourages people from making choices based on another’s values, and c) motivates people equally to engage with healthcare resources. PMID:24625283

Merging spatially variant physical process models under an optimized systems dynamics framework.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cain, William O.; Lowry, Thomas Stephen; Pierce, Suzanne A.

The complexity of water resource issues, its interconnectedness to other systems, and the involvement of competing stakeholders often overwhelm decision-makers and inhibit the creation of clear management strategies. While a range of modeling tools and procedures exist to address these problems, they tend to be case specific and generally emphasize either a quantitative and overly analytic approach or present a qualitative dialogue-based approach lacking the ability to fully explore consequences of different policy decisions. The integration of these two approaches is needed to drive toward final decisions and engender effective outcomes. Given these limitations, the Computer Assisted Dispute Resolution systemmore » (CADRe) was developed to aid in stakeholder inclusive resource planning. This modeling and negotiation system uniquely addresses resource concerns by developing a spatially varying system dynamics model as well as innovative global optimization search techniques to maximize outcomes from participatory dialogues. Ultimately, the core system architecture of CADRe also serves as the cornerstone upon which key scientific innovation and challenges can be addressed.« less

Modeling the User for Education, Training, and Performance Aiding

DTIC Science & Technology

2003-11-01

Eds.) Technology applications in education : A learning view (pp. 79–99). Hillsdale, NJ: Lawrence Erlbaum Associates. Fletcher, J.D. and Johnston, R...2003 symposium on Advanced Technologies for Military Training. v CONTENTS MODELING THE USER FOR EDUCATION , TRAINING, AND PERFORMANCE AIDING EXECUTIVE...using computer technology for education , training, decision-making, and performance aiding. Our focus is on the digital representation of these users

S4HARA: System for HIV/AIDS resource allocation.

PubMed

Lasry, Arielle; Carter, Michael W; Zaric, Gregory S

2008-03-26

HIV/AIDS resource allocation decisions are influenced by political, social, ethical and other factors that are difficult to quantify. Consequently, quantitative models of HIV/AIDS resource allocation have had limited impact on actual spending decisions. We propose a decision-support System for HIV/AIDS Resource Allocation (S4HARA) that takes into consideration both principles of efficient resource allocation and the role of non-quantifiable influences on the decision-making process for resource allocation. S4HARA is a four-step spreadsheet-based model. The first step serves to identify the factors currently influencing HIV/AIDS allocation decisions. The second step consists of prioritizing HIV/AIDS interventions. The third step involves allocating the budget to the HIV/AIDS interventions using a rational approach. Decision-makers can select from several rational models of resource allocation depending on availability of data and level of complexity. The last step combines the results of the first and third steps to highlight the influencing factors that act as barriers or facilitators to the results suggested by the rational resource allocation approach. Actionable recommendations are then made to improve the allocation. We illustrate S4HARA in the context of a primary healthcare clinic in South Africa. The clinic offers six types of HIV/AIDS interventions and spends US$750,000 annually on these programs. Current allocation decisions are influenced by donors, NGOs and the government as well as by ethical and religious factors. Without additional funding, an optimal allocation of the total budget suggests that the portion allotted to condom distribution be increased from 1% to 15% and the portion allotted to prevention and treatment of opportunistic infections be increased from 43% to 71%, while allocation to other interventions should decrease. Condom uptake at the clinic should be increased by changing the condom distribution policy from a pull system to a push system. NGOs and donors promoting antiretroviral programs at the clinic should be sensitized to the results of the model and urged to invest in wellness programs aimed at the prevention and treatment of opportunistic infections. S4HARA differentiates itself from other decision support tools by providing rational HIV/AIDS resource allocation capabilities as well as consideration of the realities facing authorities in their decision-making process.

Lung lobe segmentation based on statistical atlas and graph cuts

NASA Astrophysics Data System (ADS)

Nimura, Yukitaka; Kitasaka, Takayuki; Honma, Hirotoshi; Takabatake, Hirotsugu; Mori, Masaki; Natori, Hiroshi; Mori, Kensaku

2012-03-01

This paper presents a novel method that can extract lung lobes by utilizing probability atlas and multilabel graph cuts. Information about pulmonary structures plays very important role for decision of the treatment strategy and surgical planning. The human lungs are divided into five anatomical regions, the lung lobes. Precise segmentation and recognition of lung lobes are indispensable tasks in computer aided diagnosis systems and computer aided surgery systems. A lot of methods for lung lobe segmentation are proposed. However, these methods only target the normal cases. Therefore, these methods cannot extract the lung lobes in abnormal cases, such as COPD cases. To extract lung lobes in abnormal cases, this paper propose a lung lobe segmentation method based on probability atlas of lobe location and multilabel graph cuts. The process consists of three components; normalization based on the patient's physique, probability atlas generation, and segmentation based on graph cuts. We apply this method to six cases of chest CT images including COPD cases. Jaccard index was 79.1%.

Testing a Spanish-language colorectal cancer screening decision aid in Latinos with limited English proficiency: results from a pre-post trial and four month follow-up survey.

PubMed

Reuland, Daniel S; Ko, Linda K; Fernandez, Alicia; Braswell, Laura C; Pignone, Michael

2012-06-12

Compared with non-Latinos, Latinos in the US have low rates of colorectal cancer (CRC) screening and low rates of knowledge regarding CRC screening tests and guidelines. Spanish speaking Latinos have particularly low CRC screening rates and screening knowledge. Our purpose was twofold: (1) to evaluate the effect of a computer-based, Spanish-language CRC screening decision aid on screening knowledge, intent to obtain screening, and screening self-efficacy in a community sample of Latinos with limited English proficiency (LEP); and (2) to survey these decision aid viewers at four months to determine their rates of CRC discussions with a health care provider as well as their rates of screening test completion. We recruited 50-75 year old Latinos with LEP who were not current with CRC. Participants screening viewed a 14 minute multimedia decision aid that addresses CRC screening rationale, recommendations, and options. We conducted an uncontrolled (pre-post) study in which we assessed screening knowledge, self-efficacy, and intent at baseline and immediately after decision aid viewing. We also conducted a follow-up telephone survey of participants at four months to examine rates of patient-provider screening discussions and test completion. Among n = 80 participants, knowledge scores increased from 20% (before) to 72% (after) decision aid viewing (absolute difference [95%CI]: 52% [46, 59]). The proportion with high screening self-efficacy increased from 67% to 92% (25% [13, 37]); the proportion with high screening intent increased from 63% to 95% (32% [21, 44]). We reached 68 (85%) of 80 participants eligible for the follow-up survey. Of these 36 (53%) reported discussing screening with a provider and 13 (19%) completed a test. Viewing a Spanish-language decision aid increased CRC screening knowledge, self-efficacy, and intent among Latinos with LEP. Decision aid viewing appeared to promote both CRC screening discussions with health care providers and test completion. The decision aid may be an effective tool for promoting CRC screening and reducing screening disparities in this population.

Promoting the dissemination of decision aids: an odyssey in a dysfunctional health care financing system.

PubMed

Billings, John

2004-01-01

The usefulness of patient decision aids (PtDAs) is well documented, yet they are not in widespread use. Barriers include assuring balance and fairness (auspices matter), the cost of producing and maintaining them, and getting them into the hands of patients at the right time. The Foundation for Informed Medical Decision Making and its for-profit partner, Health Dialog, have developed a creative business model that helps overcome these barriers and has greatly expanded the reach of decision aids.

The NASA/Baltimore Applications Project (BAP). Computer aided dispatch and communications system for the Baltimore Fire Department: A case study of urban technology application

NASA Technical Reports Server (NTRS)

Levine, A. L.

1981-01-01

An engineer and a computer expert from Goddard Space Flight Center were assigned to provide technical assistance in the design and installation of a computer assisted system for dispatching and communicating with fire department personnel and equipment in Baltimore City. Primary contributions were in decision making and management processes. The project is analyzed from four perspectives: (1) fire service; (2) technology transfer; (3) public administration; and (5) innovation. The city benefitted substantially from the approach and competence of the NASA personnel. Given the proper conditions, there are distinct advantages in having a nearby Federal laboratory provide assistance to a city on a continuing basis, as is done in the Baltimore Applications Project.

Progress on Intelligent Guidance and Control for Wind Shear Encounter

NASA Technical Reports Server (NTRS)

Stratton, D. Alexander

1990-01-01

Low altitude wind shear poses a serious threat to air safety. Avoiding severe wind shear challenges the ability of flight crews, as it involves assessing risk from uncertain evidence. A computerized intelligent cockpit aid can increase flight crew awareness of wind shear, improving avoidance decisions. The primary functions of a cockpit advisory expert system for wind shear avoidance are discussed. Also introduced are computational techniques being implemented to enable these primary functions.

A Computer-Aided Diagnosis System for Breast Cancer Combining Mammography and Proteomics

DTIC Science & Technology

2007-05-01

findings in both Data sets C and M. The likelihood ratio is the probability of the features un- der the malignant case divided by the probability of...likelihood ratio value as a classification decision variable, the probabilities of detection and false alarm are calculated as follows: Pdfusion...lowered the fused classifier’s performance to near chance levels. A genetic algorithm searched over the likelihood- ratio thresh- old values for each

Deep learning aided decision support for pulmonary nodules diagnosing: a review

PubMed Central

Yang, Yixin; Feng, Xiaoyi; Chi, Wenhao; Li, Zhengyang; Duan, Wenzhe; Liu, Haiping; Liang, Wenhua; Wang, Wei; Chen, Ping

2018-01-01

Deep learning techniques have recently emerged as promising decision supporting approaches to automatically analyze medical images for different clinical diagnosing purposes. Diagnosing of pulmonary nodules by using computer-assisted diagnosing has received considerable theoretical, computational, and empirical research work, and considerable methods have been developed for detection and classification of pulmonary nodules on different formats of images including chest radiographs, computed tomography (CT), and positron emission tomography in the past five decades. The recent remarkable and significant progress in deep learning for pulmonary nodules achieved in both academia and the industry has demonstrated that deep learning techniques seem to be promising alternative decision support schemes to effectively tackle the central issues in pulmonary nodules diagnosing, including feature extraction, nodule detection, false-positive reduction, and benign-malignant classification for the huge volume of chest scan data. The main goal of this investigation is to provide a comprehensive state-of-the-art review of the deep learning aided decision support for pulmonary nodules diagnosing. As far as the authors know, this is the first time that a review is devoted exclusively to deep learning techniques for pulmonary nodules diagnosing. PMID:29780633

Entertainment education for prostate cancer screening: a randomized trial among primary care patients with low health literacy.

PubMed

Volk, Robert J; Jibaja-Weiss, Maria L; Hawley, Sarah T; Kneuper, Suzanne; Spann, Stephen J; Miles, Brian J; Hyman, David J

2008-12-01

To evaluate an entertainment-based patient decision aid for prostate cancer screening among patients with low or high health literacy. Male primary care patients from two clinical sites, one characterized as serving patients with low health literacy (n=149) and the second as serving patients with high health literacy (n=301), were randomized to receive an entertainment-based decision aid for prostate cancer screening or an audiobooklet-control aid with the same learner content but without the entertainment features. Postintervention and 2-week follow-up assessments were conducted. Patients at the low-literacy site were more engaged with the entertainment-based aid than patients at the high-literacy site. Overall, knowledge improved for all patients. Among patients at the low-literacy site, the entertainment-based aid was associated with lower decisional conflict and greater self-advocacy (i.e., mastering and obtaining information about screening) when compared to patients given the audiobooklet. No differences between the aids were observed for patients at the high-literacy site. Entertainment education may be an effective strategy for promoting informed decision making about prostate cancer screening among patients with lower health literacy. As barriers to implementing computer-based patient decision support programs decrease, alternative models for delivering these programs should be explored.

Integration of the Execution Support System for the Computer-Aided Prototyping System (CAPS)

DTIC Science & Technology

1990-09-01

SUPPORT SYSTEM FOR THE COMPUTER -AIDED PROTOTYPING SYSTEM (CAPS) by Frank V. Palazzo September 1990 Thesis Advisor: Luq± Approved for public release...ZATON REPOR ,,.VBE (, 6a NAME OF PERPORMING ORGAN ZAT7ON 6b OFF:CE SYVBOL 7a NAME OF MONITORINC O0-CA’Za- ON Computer Science Department (if applicable...Include Security Classification) Integration of the Execution Support System for the Computer -Aided Prototyping System (C S) 12 PERSONAL AUTHOR(S) Frank V

Review of Multi-Criteria Decision Aid for Integrated Sustainability Assessment of Urban Water Systems - MCEARD

EPA Science Inventory

Integrated sustainability assessment is part of a new paradigm for urban water decision making. Multi-criteria decision aid (MCDA) is an integrative framework used in urban water sustainability assessment, which has a particular focus on utilising stakeholder participation. Here ...

Comparison of display enhancement with intelligent decision-aiding

NASA Technical Reports Server (NTRS)

Kirlik, Alex; Markert, Wendy J.; Kossack, Merrick

1992-01-01

Currently, two main approaches exist for improving the human-machine interface component of a system in order to improve overall system performance, display enhancement and intelligent decision aiding. Each of these two approaches has its own set of advantages and disadvantages, as well as introduce its own set of additional performance problems. These characteristics should help identify which types of problem situations and domains are better aided by which type of strategy. The characteristic issues are described of these two decision aiding strategies. Then differences in expert and novice decision making are described in order to help determine whether a particular strategy may be better for a particular type of user. Finally, research is outlined to compare and contrast the two technologies, as well as to examine the interaction effects introduced by the different skill levels and the different methods for training operators.

Performance evaluation of automated manufacturing systems using generalized stochastic Petri Nets. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Al-Jaar, Robert Y.; Desrochers, Alan A.

1989-01-01

The main objective of this research is to develop a generic modeling methodology with a flexible and modular framework to aid in the design and performance evaluation of integrated manufacturing systems using a unified model. After a thorough examination of the available modeling methods, the Petri Net approach was adopted. The concurrent and asynchronous nature of manufacturing systems are easily captured by Petri Net models. Three basic modules were developed: machine, buffer, and Decision Making Unit. The machine and buffer modules are used for modeling transfer lines and production networks. The Decision Making Unit models the functions of a computer node in a complex Decision Making Unit Architecture. The underlying model is a Generalized Stochastic Petri Net (GSPN) that can be used for performance evaluation and structural analysis. GSPN's were chosen because they help manage the complexity of modeling large manufacturing systems. There is no need to enumerate all the possible states of the Markov Chain since they are automatically generated from the GSPN model.

The role of networks and artificial intelligence in nanotechnology design and analysis.

PubMed

Hudson, D L; Cohen, M E

2004-05-01

Techniques with their origins in artificial intelligence have had a great impact on many areas of biomedicine. Expert-based systems have been used to develop computer-assisted decision aids. Neural networks have been used extensively in disease classification and more recently in many bioinformatics applications including genomics and drug design. Network theory in general has proved useful in modeling all aspects of biomedicine from healthcare organizational structure to biochemical pathways. These methods show promise in applications involving nanotechnology both in the design phase and in interpretation of system functioning.

Interfacing Computer Aided Parallelization and Performance Analysis

NASA Technical Reports Server (NTRS)

Jost, Gabriele; Jin, Haoqiang; Labarta, Jesus; Gimenez, Judit; Biegel, Bryan A. (Technical Monitor)

2003-01-01

When porting sequential applications to parallel computer architectures, the program developer will typically go through several cycles of source code optimization and performance analysis. We have started a project to develop an environment where the user can jointly navigate through program structure and performance data information in order to make efficient optimization decisions. In a prototype implementation we have interfaced the CAPO computer aided parallelization tool with the Paraver performance analysis tool. We describe both tools and their interface and give an example for how the interface helps within the program development cycle of a benchmark code.

A scoring system for selection of essential drugs.

PubMed

Mathur, V S; Chaudhury, R R; Fraser, H S

1988-03-01

A scoring system is presented for selection of essential drugs, using criteria of efficacy, safety, cost of a course of therapy, compliance, multiple usage and storage, ease of administration and local availability. Such a system allows for different weighting of factors whose relative importance varies from country to country and would help in choosing the most appropriate and cost-effective drugs for use in developing countries. The importance of such factors as cost and compliance has been illustrated with suitable examples. This approach could also be used for individual patient decisions with the aid of a computer program.

Two decision aids for mode of delivery among women with previous caesarean section: randomised controlled trial.

PubMed

Montgomery, Alan A; Emmett, Clare L; Fahey, Tom; Jones, Claire; Ricketts, Ian; Patel, Roshni R; Peters, Tim J; Murphy, Deirdre J

2007-06-23

To determine the effects of two computer based decision aids on decisional conflict and mode of delivery among pregnant women with a previous caesarean section. Randomised trial, conducted from May 2004 to August 2006. Four maternity units in south west England, and Scotland. 742 pregnant women with one previous lower segment caesarean section and delivery expected at >or=37 weeks. Non-English speakers were excluded. Usual care: standard care given by obstetric and midwifery staff. Information programme: women navigated through descriptions and probabilities of clinical outcomes for mother and baby associated with planned vaginal birth, elective caesarean section, and emergency caesarean section. Decision analysis: mode of delivery was recommended based on utility assessments performed by the woman combined with probabilities of clinical outcomes within a concealed decision tree. Both interventions were delivered via a laptop computer after brief instructions from a researcher. Total score on decisional conflict scale, and mode of delivery. Women in the information programme (adjusted difference -6.2, 95% confidence interval -8.7 to -3.7) and the decision analysis (-4.0, -6.5 to -1.5) groups had reduced decisional conflict compared with women in the usual care group. The rate of vaginal birth was higher for women in the decision analysis group compared with the usual care group (37% v 30%, adjusted odds ratio 1.42, 0.94 to 2.14), but the rates were similar in the information programme and usual care groups. Decision aids can help women who have had a previous caesarean section to decide on mode of delivery in a subsequent pregnancy. The decision analysis approach might substantially affect national rates of caesarean section. Trial Registration Current Controlled Trials ISRCTN84367722.

Computer Aided Design in Engineering Education.

ERIC Educational Resources Information Center

Gobin, R.

1986-01-01

Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

Age-related differences in reliance behavior attributable to costs within a human-decision aid system.

PubMed

Ezer, Neta; Fisk, Arthur D; Rogers, Wendy A

2008-12-01

An empirical investigation was done to determine if there are age-related differences attributable to costs in reliance on a decision aid. Costs of reliance on a decision aid may affect reliance on the aid. Older and younger adults may not perceive and respond to a dynamic cost structure equally or objectively. Sixteen older adults (65-74 years) and 16 younger adults (18-28 years) performed a counting task with an imperfect decision aid. Two types of costs were manipulated: (a) cost of error (CoE) and (b) cost of verification (CoV). The percentage of trials in which participants agreed with the decision aid and did not perform the task manually was recorded as reliance. Participants decreased their reliance as the CoE increased and increased their reliance with a lower CoV; however, they tended to underrely on the decision aid. Younger adults tended to change their reliance behavior more than older adults did with the changing cost structure. Older and younger adults appear to interpret costs differently, with older adults being less responsive to changes in costs. Older adults may have been less able to monitor the changing costs and hence not adapt to them as well as younger adults. Designers of decision aids should consider explicitly stating costs associated with reliance on the aid, as individuals may differ in how they interpret and respond to changing costs.

Computer-aided diagnostic system for detection of Hashimoto thyroiditis on ultrasound images from a Polish population.

PubMed

Acharya, U Rajendra; Sree, S Vinitha; Krishnan, M Muthu Rama; Molinari, Filippo; Zieleźnik, Witold; Bardales, Ricardo H; Witkowska, Agnieszka; Suri, Jasjit S

2014-02-01

Computer-aided diagnostic (CAD) techniques aid physicians in better diagnosis of diseases by extracting objective and accurate diagnostic information from medical data. Hashimoto thyroiditis is the most common type of inflammation of the thyroid gland. The inflammation changes the structure of the thyroid tissue, and these changes are reflected as echogenic changes on ultrasound images. In this work, we propose a novel CAD system (a class of systems called ThyroScan) that extracts textural features from a thyroid sonogram and uses them to aid in the detection of Hashimoto thyroiditis. In this paradigm, we extracted grayscale features based on stationary wavelet transform from 232 normal and 294 Hashimoto thyroiditis-affected thyroid ultrasound images obtained from a Polish population. Significant features were selected using a Student t test. The resulting feature vectors were used to build and evaluate the following 4 classifiers using a 10-fold stratified cross-validation technique: support vector machine, decision tree, fuzzy classifier, and K-nearest neighbor. Using 7 significant features that characterized the textural changes in the images, the fuzzy classifier had the highest classification accuracy of 84.6%, sensitivity of 82.8%, specificity of 87.0%, and a positive predictive value of 88.9%. The proposed ThyroScan CAD system uses novel features to noninvasively detect the presence of Hashimoto thyroiditis on ultrasound images. Compared to manual interpretations of ultrasound images, the CAD system offers a more objective interpretation of the nature of the thyroid. The preliminary results presented in this work indicate the possibility of using such a CAD system in a clinical setting after evaluating it with larger databases in multicenter clinical trials.

Software For Computer-Aided Design Of Control Systems

NASA Technical Reports Server (NTRS)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

Fault diagnosis

NASA Technical Reports Server (NTRS)

Abbott, Kathy

1990-01-01

The objective of the research in this area of fault management is to develop and implement a decision aiding concept for diagnosing faults, especially faults which are difficult for pilots to identify, and to develop methods for presenting the diagnosis information to the flight crew in a timely and comprehensible manner. The requirements for the diagnosis concept were identified by interviewing pilots, analyzing actual incident and accident cases, and examining psychology literature on how humans perform diagnosis. The diagnosis decision aiding concept developed based on those requirements takes abnormal sensor readings as input, as identified by a fault monitor. Based on these abnormal sensor readings, the diagnosis concept identifies the cause or source of the fault and all components affected by the fault. This concept was implemented for diagnosis of aircraft propulsion and hydraulic subsystems in a computer program called Draphys (Diagnostic Reasoning About Physical Systems). Draphys is unique in two important ways. First, it uses models of both functional and physical relationships in the subsystems. Using both models enables the diagnostic reasoning to identify the fault propagation as the faulted system continues to operate, and to diagnose physical damage. Draphys also reasons about behavior of the faulted system over time, to eliminate possibilities as more information becomes available, and to update the system status as more components are affected by the fault. The crew interface research is examining display issues associated with presenting diagnosis information to the flight crew. One study examined issues for presenting system status information. One lesson learned from that study was that pilots found fault situations to be more complex if they involved multiple subsystems. Another was pilots could identify the faulted systems more quickly if the system status was presented in pictorial or text format. Another study is currently under way to examine pilot mental models of the aircraft subsystems and their use in diagnosis tasks. Future research plans include piloted simulation evaluation of the diagnosis decision aiding concepts and crew interface issues. Information is given in viewgraph form.

Modelling decision-making by pilots

NASA Technical Reports Server (NTRS)

Patrick, Nicholas J. M.

1993-01-01

Our scientific goal is to understand the process of human decision-making. Specifically, a model of human decision-making in piloting modern commercial aircraft which prescribes optimal behavior, and against which we can measure human sub-optimality is sought. This model should help us understand such diverse aspects of piloting as strategic decision-making, and the implicit decisions involved in attention allocation. Our engineering goal is to provide design specifications for (1) better computer-based decision-aids, and (2) better training programs for the human pilot (or human decision-maker, DM).

Increasing productivity of the McAuto CAD/CAE system by user-specific applications programming

NASA Technical Reports Server (NTRS)

Plotrowski, S. M.; Vu, T. H.

1985-01-01

Significant improvements in the productivity of the McAuto Computer-Aided Design/Computer-Aided Engineering (CAD/CAE) system were achieved by applications programming using the system's own Graphics Interactive Programming language (GRIP) and the interface capabilities with the main computer on which the system resides. The GRIP programs for creating springs, bar charts, finite element model representations and aiding management planning are presented as examples.

Acquisition and production of skilled behavior in dynamic decision-making tasks: Modeling strategic behavior in human-automation interaction: Why and aid can (and should) go unused

NASA Technical Reports Server (NTRS)

Kirlik, Alex

1991-01-01

Advances in computer and control technology offer the opportunity for task-offload aiding in human-machine systems. A task-offload aid (e.g., an autopilot, an intelligent assistant) can be selectively engaged by the human operator to dynamically delegate tasks to an automated system. Successful design and performance prediction in such systems requires knowledge of the factors influencing the strategy the operator develops and uses for managing interaction with the task-offload aid. A model is presented that shows how such strategies can be predicted as a function of three task context properties (frequency and duration of secondary tasks and costs of delaying secondary tasks) and three aid design properties (aid engagement and disengagement times, aid performance relative to human performance). Sensitivity analysis indicates how each of these contextual and design factors affect the optimal aid aid usage strategy and attainable system performance. The model is applied to understanding human-automation interaction in laboratory experiments on human supervisory control behavior. The laboratory task allowed subjects freedom to determine strategies for using an autopilot in a dynamic, multi-task environment. Modeling results suggested that many subjects may indeed have been acting appropriately by not using the autopilot in the way its designers intended. Although autopilot function was technically sound, this aid was not designed with due regard to the overall task context in which it was placed. These results demonstrate the need for additional research on how people may strategically manage their own resources, as well as those provided by automation, in an effort to keep workload and performance at acceptable levels.

CAD/CAE Integration Enhanced by New CAD Services Standard

NASA Technical Reports Server (NTRS)

Claus, Russell W.

2002-01-01

A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

[Clinical skills and outcomes of chair-side computer aided design and computer aided manufacture system].

PubMed

Yu, Q

2018-04-09

Computer aided design and computer aided manufacture (CAD/CAM) technology is a kind of oral digital system which is applied to clinical diagnosis and treatment. It overturns the traditional pattern, and provides a solution to restore defect tooth quickly and efficiently. In this paper we mainly discuss the clinical skills of chair-side CAD/CAM system, including tooth preparation, digital impression, the three-dimensional design of prosthesis, numerical control machining, clinical bonding and so on, and review the outcomes of several common kinds of materials at the same time.

Health Science Education

ERIC Educational Resources Information Center

Hartsell, Horace C.

1970-01-01

Briefly describes several instructional techniques including computer aid simulation of the medical encounter, media-biased approaches for teaching doctor-patient relationships, and programed media for teaching decision-making to nursing students." (Author/AA)

Computer-aided diagnostic strategy selection.

PubMed

Greenes, R A

1986-03-01

Determination of the optimal diagnostic work-up strategy for the patient is becoming a major concern for the practicing physician. Overlap of the indications for various diagnostic procedures, differences in their invasiveness or risk, and high costs have made physicians aware of the need to consider the choice of procedure carefully, as well as its relation to management actions available. In this article, the author discusses research approaches that aim toward development of formal decision analytic methods to allow the physician to determine optimal strategy; clinical algorithms or rules as guides to physician decisions; improved measures for characterizing the performance of diagnostic tests; educational tools for increasing the familiarity of physicians with the concepts underlying these measures and analytic procedures; and computer-based aids for facilitating the employment of these resources in actual clinical practice.

Introduction to SIMRAND: Simulation of research and development project

NASA Technical Reports Server (NTRS)

Miles, R. F., Jr.

1982-01-01

SIMRAND: SIMulation of Research ANd Development Projects is a methodology developed to aid the engineering and management decision process in the selection of the optimal set of systems or tasks to be funded on a research and development project. A project may have a set of systems or tasks under consideration for which the total cost exceeds the allocated budget. Other factors such as personnel and facilities may also enter as constraints. Thus the project's management must select, from among the complete set of systems or tasks under consideration, a partial set that satisfies all project constraints. The SIMRAND methodology uses analytical techniques and probability theory, decision analysis of management science, and computer simulation, in the selection of this optimal partial set. The SIMRAND methodology is truly a management tool. It initially specifies the information that must be generated by the engineers, thus providing information for the management direction of the engineers, and it ranks the alternatives according to the preferences of the decision makers.

Entertainment Education for Prostate Cancer Screening: A Randomized Trial among Primary Care Patients with Low Health Literacy

PubMed Central

Volk, Robert J.; Jibaja-Weiss, Maria L.; Hawley, Sarah T.; Kneuper, Suzanne; Spann, Stephen J.; Miles, Brian J.; Hyman, David J.

2008-01-01

Objective To evaluate an entertainment-based patient decision aid for prostate cancer screening among patients with low or high health literacy. Methods Male primary care patients from two clinical sites, one characterized as serving patients with low health literacy (n=149) and the second as serving patients with high health literacy (n=301), were randomized to receive an entertainment-based decision aid for prostate cancer screening or an audiobooklet-control aid with the same learner content but without the entertainment features. Postintervention and 2-week follow-up assessments were conducted. Results Patients at the low-literacy site were more engaged with the entertainment-based aid than patients at the high-literacy site. Overall, knowledge improved for all patients. Among patients at the low-literacy site, the entertainment-based aid was associated with lower decisional conflict and greater self-advocacy (i.e., mastering and obtaining information about screening) when compared to patients given the audiobooklet. No differences between the aids were observed for patients at the high-literacy site. Conclusions Entertainment education may be an effective strategy for promoting informed decision making about prostate cancer screening among patients with lower health literacy. Practice Implications As barriers to implementing computer-based patient decision support programs decrease, alternative models for delivering these programs should be explored. PMID:18760888

Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

PubMed

Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

2014-12-01

This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p < 0.001). Significant differences in mean costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p < 0.001). Significant differences were also obtained between the costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

A web-based tool to support shared decision making for people with a psychotic disorder: randomized controlled trial and process evaluation.

PubMed

van der Krieke, Lian; Emerencia, Ando C; Boonstra, Nynke; Wunderink, Lex; de Jonge, Peter; Sytema, Sjoerd

2013-10-07

Mental health policy makers encourage the development of electronic decision aids to increase patient participation in medical decision making. Evidence is needed to determine whether these decision aids are helpful in clinical practice and whether they lead to increased patient involvement and better outcomes. This study reports the outcome of a randomized controlled trial and process evaluation of a Web-based intervention to facilitate shared decision making for people with psychotic disorders. The study was carried out in a Dutch mental health institution. Patients were recruited from 2 outpatient teams for patients with psychosis (N=250). Patients in the intervention condition (n=124) were provided an account to access a Web-based information and decision tool aimed to support patients in acquiring an overview of their needs and appropriate treatment options provided by their mental health care organization. Patients were given the opportunity to use the Web-based tool either on their own (at their home computer or at a computer of the service) or with the support of an assistant. Patients in the control group received care as usual (n=126). Half of the patients in the sample were patients experiencing a first episode of psychosis; the other half were patients with a chronic psychosis. Primary outcome was patient-perceived involvement in medical decision making, measured with the Combined Outcome Measure for Risk Communication and Treatment Decision-making Effectiveness (COMRADE). Process evaluation consisted of questionnaire-based surveys, open interviews, and researcher observation. In all, 73 patients completed the follow-up measurement and were included in the final analysis (response rate 29.2%). More than one-third (48/124, 38.7%) of the patients who were provided access to the Web-based decision aid used it, and most used its full functionality. No differences were found between the intervention and control conditions on perceived involvement in medical decision making (COMRADE satisfaction with communication: F1,68=0.422, P=.52; COMRADE confidence in decision: F1,67=0.086, P=.77). In addition, results of the process evaluation suggest that the intervention did not optimally fit in with routine practice of the participating teams. The development of electronic decision aids to facilitate shared medical decision making is encouraged and many people with a psychotic disorder can work with them. This holds for both first-episode patients and long-term care patients, although the latter group might need more assistance. However, results of this paper could not support the assumption that the use of electronic decision aids increases patient involvement in medical decision making. This may be because of weak implementation of the study protocol and a low response rate.

Foundation and methodologies in computer-aided diagnosis systems for breast cancer detection.

PubMed

Jalalian, Afsaneh; Mashohor, Syamsiah; Mahmud, Rozi; Karasfi, Babak; Saripan, M Iqbal B; Ramli, Abdul Rahman B

2017-01-01

Breast cancer is the most prevalent cancer that affects women all over the world. Early detection and treatment of breast cancer could decline the mortality rate. Some issues such as technical reasons, which related to imaging quality and human error, increase misdiagnosis of breast cancer by radiologists. Computer-aided detection systems (CADs) are developed to overcome these restrictions and have been studied in many imaging modalities for breast cancer detection in recent years. The CAD systems improve radiologists' performance in finding and discriminating between the normal and abnormal tissues. These procedures are performed only as a double reader but the absolute decisions are still made by the radiologist. In this study, the recent CAD systems for breast cancer detection on different modalities such as mammography, ultrasound, MRI, and biopsy histopathological images are introduced. The foundation of CAD systems generally consist of four stages: Pre-processing, Segmentation, Feature extraction, and Classification. The approaches which applied to design different stages of CAD system are summarised. Advantages and disadvantages of different segmentation, feature extraction and classification techniques are listed. In addition, the impact of imbalanced datasets in classification outcomes and appropriate methods to solve these issues are discussed. As well as, performance evaluation metrics for various stages of breast cancer detection CAD systems are reviewed.

Foundation and methodologies in computer-aided diagnosis systems for breast cancer detection

PubMed Central

Jalalian, Afsaneh; Mashohor, Syamsiah; Mahmud, Rozi; Karasfi, Babak; Saripan, M. Iqbal B.; Ramli, Abdul Rahman B.

2017-01-01

Breast cancer is the most prevalent cancer that affects women all over the world. Early detection and treatment of breast cancer could decline the mortality rate. Some issues such as technical reasons, which related to imaging quality and human error, increase misdiagnosis of breast cancer by radiologists. Computer-aided detection systems (CADs) are developed to overcome these restrictions and have been studied in many imaging modalities for breast cancer detection in recent years. The CAD systems improve radiologists' performance in finding and discriminating between the normal and abnormal tissues. These procedures are performed only as a double reader but the absolute decisions are still made by the radiologist. In this study, the recent CAD systems for breast cancer detection on different modalities such as mammography, ultrasound, MRI, and biopsy histopathological images are introduced. The foundation of CAD systems generally consist of four stages: Pre-processing, Segmentation, Feature extraction, and Classification. The approaches which applied to design different stages of CAD system are summarised. Advantages and disadvantages of different segmentation, feature extraction and classification techniques are listed. In addition, the impact of imbalanced datasets in classification outcomes and appropriate methods to solve these issues are discussed. As well as, performance evaluation metrics for various stages of breast cancer detection CAD systems are reviewed. PMID:28435432

Diverter AI based decision aid, phases 1 and 2

NASA Technical Reports Server (NTRS)

Sexton, George A.; Bayles, Scott J.; Patterson, Robert W.; Schulke, Duane A.; Williams, Deborah C.

1989-01-01

It was determined that a system to incorporate artificial intelligence (AI) into airborne flight management computers is feasible. The AI functions that would be most useful to the pilot are to perform situational assessment, evaluate outside influences on the contemplated rerouting, perform flight planning/replanning, and perform maneuver planning. A study of the software architecture and software tools capable of demonstrating Diverter was also made. A skeletal planner known as the Knowledge Acquisition Development Tool (KADET), which is a combination script-based and rule-based system, was used to implement the system. A prototype system was developed which demonstrates advanced in-flight planning/replanning capabilities.

Diagnostic Machine Learning Models for Acute Abdominal Pain: Towards an e-Learning Tool for Medical Students.

PubMed

Khumrin, Piyapong; Ryan, Anna; Judd, Terry; Verspoor, Karin

2017-01-01

Computer-aided learning systems (e-learning systems) can help medical students gain more experience with diagnostic reasoning and decision making. Within this context, providing feedback that matches students' needs (i.e. personalised feedback) is both critical and challenging. In this paper, we describe the development of a machine learning model to support medical students' diagnostic decisions. Machine learning models were trained on 208 clinical cases presenting with abdominal pain, to predict five diagnoses. We assessed which of these models are likely to be most effective for use in an e-learning tool that allows students to interact with a virtual patient. The broader goal is to utilise these models to generate personalised feedback based on the specific patient information requested by students and their active diagnostic hypotheses.

Medical imaging and registration in computer assisted surgery.

PubMed

Simon, D A; Lavallée, S

1998-09-01

Imaging, sensing, and computing technologies that are being introduced to aid in the planning and execution of surgical procedures are providing orthopaedic surgeons with a powerful new set of tools for improving clinical accuracy, reliability, and patient outcomes while reducing costs and operating times. Current computer assisted surgery systems typically include a measurement process for collecting patient specific medical data, a decision making process for generating a surgical plan, a registration process for aligning the surgical plan to the patient, and an action process for accurately achieving the goals specified in the plan. Some of the key concepts in computer assisted surgery applied to orthopaedics with a focus on the basic framework and underlying technologies is outlined. In addition, technical challenges and future trends in the field are discussed.

The perspectives of Iranian physicians and patients towards patient decision aids: a qualitative study.

PubMed

Rashidian, Hamideh; Nedjat, Saharnaz; Majdzadeh, Reza; Gholami, Jaleh; Haghjou, Leila; Abdollahi, Bahar Sadeghi; Davatchi, Fereydoun; Rashidian, Arash

2013-09-25

Patient preference is one of the main components of clinical decision making, therefore leading to the development of patient decision aids. The goal of this study was to describe physicians' and patients' viewpoints on the barriers and limitations of using patient decision aids in Iran, their proposed solutions, and, the benefits of using these tools. This qualitative study was conducted in 2011 in Iran by holding in-depth interviews with 14 physicians and 8 arthritis patient. Interviewees were selected through purposeful and maximum variation sampling. As an example, a patient decision aid on the treatment of knee arthritis was developed upon literature reviews and gathering expert opinion, and was presented at the time of interview. Thematic analysis was conducted to analyze the data by using the OpenCode software. The results were summarized into three categories and ten codes. The extracted categories were the perceived benefits of using the tools, as well as the patient-related and physician-related barriers in using decision aids. The following barriers in using patient decision aids were identified in this study: lack of patients and physicians' trainings in shared decision making, lack of specialist per capita, low treatment tariffs and lack of an exact evaluation system for patient participation in decision making. No doubt these barriers demand the health authorities' special attention. Hence, despite patients and physicians' inclination toward using patient decision aids, these problems have hindered the practical usage of these tools in Iran--as a developing country.

Evaluating Computer-Based Assessment in a Risk-Based Model

ERIC Educational Resources Information Center

Zakrzewski, Stan; Steven, Christine; Ricketts, Chris

2009-01-01

There are three purposes for evaluation: evaluation for action to aid the decision making process, evaluation for understanding to further enhance enlightenment and evaluation for control to ensure compliance to standards. This article argues that the primary function of evaluation in the "Catherine Wheel" computer-based assessment (CBA)…

Computer-aided design development transition for IPAD environment

NASA Technical Reports Server (NTRS)

Owens, H. G.; Mock, W. D.; Mitchell, J. C.

1980-01-01

The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

Computer-aided diagnosis: A survey with bibliometric analysis.

PubMed

Takahashi, Ryohei; Kajikawa, Yuya

2017-05-01

Computer-aided diagnosis (CAD) has been a promising area of research over the last two decades. However, CAD is a very complicated subject because it involves a number of medicine and engineering-related fields. To develop a research overview of CAD, we conducted a literature survey with bibliometric analysis, which we report here. Our study determined that CAD research has been classified and categorized according to disease type and imaging modality. This classification began with the CAD of mammograms and eventually progressed to that of brain disease. Furthermore, based on our results, we discuss future directions and opportunities for CAD research. First, in contrast to the typical hypothetical approach, the data-driven approach has shown promise. Second, the normalization of the test datasets and an evaluation method is necessary when adopting an algorithm and a system. Third, we discuss opportunities for the co-evolution of CAD research and imaging instruments-for example, the CAD of bones and pancreatic cancer. Fourth, the potential of synergy with CAD and clinical decision support systems is also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Systematic methods for knowledge acquisition and expert system development

NASA Technical Reports Server (NTRS)

Belkin, Brenda L.; Stengel, Robert F.

1991-01-01

Nine cooperating rule-based systems, collectively called AUTOCREW, were designed to automate functions and decisions associated with a combat aircraft's subsystem. The organization of tasks within each system is described; performance metrics were developed to evaluate the workload of each rule base, and to assess the cooperation between the rule-bases. Each AUTOCREW subsystem is composed of several expert systems that perform specific tasks. AUTOCREW's NAVIGATOR was analyzed in detail to understand the difficulties involved in designing the system and to identify tools and methodologies that ease development. The NAVIGATOR determines optimal navigation strategies from a set of available sensors. A Navigation Sensor Management (NSM) expert system was systematically designed from Kalman filter covariance data; four ground-based, a satellite-based, and two on-board INS-aiding sensors were modeled and simulated to aid an INS. The NSM Expert was developed using the Analysis of Variance (ANOVA) and the ID3 algorithm. Navigation strategy selection is based on an RSS position error decision metric, which is computed from the covariance data. Results show that the NSM Expert predicts position error correctly between 45 and 100 percent of the time for a specified navaid configuration and aircraft trajectory. The NSM Expert adapts to new situations, and provides reasonable estimates of hybrid performance. The systematic nature of the ANOVA/ID3 method makes it broadly applicable to expert system design when experimental or simulation data is available.

On the Design of a CADS for Shoulder Pain Pathology

NASA Astrophysics Data System (ADS)

de Ipiña, K. López; Hernández, M. C.; Martínez, E.; Vaquero, C.

A musculoskeletal disorder is a condition of the musculoskeletal system, which consists in part of it being injured continuously over time. Shoulder disorders are one of the most common musculoskeletal cases attended in primary health care services. Shoulder disorders cause pain and limit the ability to perform many routine activities, affecting about 15-25 % of the general population. Several clinical tests have been described to aid diagnosis of shoulder disorders. However, the current literature acknowledges a lack of concordance in clinical assessment, even among musculoskeletal specialists. We are working on the design of a Computer-Aided Decision Support (CADS) system for Shoulder Pain Pathology. The paper presents the results of our efforts to build a CADS system testing several classical classification paradigms, feature reduction methods (PCA) and K-means unsupervised clustering. The small database size imposes the use of robust covariance matrix estimation methods to improve the system performance. Finally, the system was evaluated by a medical specialist.

A Computer-Based, Interactive Videodisc Job Aid and Expert System for Electron Beam Lithography Integration and Diagnostic Procedures.

ERIC Educational Resources Information Center

Stevenson, Kimberly

This master's thesis describes the development of an expert system and interactive videodisc computer-based instructional job aid used for assisting in the integration of electron beam lithography devices. Comparable to all comprehensive training, expert system and job aid development require a criterion-referenced systems approach treatment to…

Decision-Making Amplification under Uncertainty: An Exploratory Study of Behavioral Similarity and Intelligent Decision Support Systems

ERIC Educational Resources Information Center

Campbell, Merle Wayne

2013-01-01

Intelligent decision systems have the potential to support and greatly amplify human decision-making across a number of industries and domains. However, despite the rapid improvement in the underlying capabilities of these "intelligent" systems, increasing their acceptance as decision aids in industry has remained a formidable challenge.…

Decision support aids with anthropomorphic characteristics influence trust and performance in younger and older adults.

PubMed

Pak, Richard; Fink, Nicole; Price, Margaux; Bass, Brock; Sturre, Lindsay

2012-01-01

This study examined the use of deliberately anthropomorphic automation on younger and older adults' trust, dependence and performance on a diabetes decision-making task. Research with anthropomorphic interface agents has shown mixed effects in judgments of preferences but has rarely examined effects on performance. Meanwhile, research in automation has shown some forms of anthropomorphism (e.g. etiquette) have effects on trust and dependence on automation. Participants answered diabetes questions with no-aid, a non-anthropomorphic aid or an anthropomorphised aid. Trust and dependence in the aid was measured. A minimally anthropomorphic aide primarily affected younger adults' trust in the aid. Dependence, however, for both age groups was influenced by the anthropomorphic aid. Automation that deliberately embodies person-like characteristics can influence trust and dependence on reasonably reliable automation. However, further research is necessary to better understand the specific aspects of the aid that affect different age groups. Automation that embodies human-like characteristics may be useful in situations where there is under-utilisation of reasonably reliable aids by enhancing trust and dependence in that aid. Practitioner Summary: The design of decision-support aids on consumer devices (e.g. smartphones) may influence the level of trust that users place in that system and their amount of use. This study is the first step in articulating how the design of aids may influence user's trust and use of such systems.

Biomedical visual data analysis to build an intelligent diagnostic decision support system in medical genetics.

PubMed

Kuru, Kaya; Niranjan, Mahesan; Tunca, Yusuf; Osvank, Erhan; Azim, Tayyaba

2014-10-01

In general, medical geneticists aim to pre-diagnose underlying syndromes based on facial features before performing cytological or molecular analyses where a genotype-phenotype interrelation is possible. However, determining correct genotype-phenotype interrelationships among many syndromes is tedious and labor-intensive, especially for extremely rare syndromes. Thus, a computer-aided system for pre-diagnosis can facilitate effective and efficient decision support, particularly when few similar cases are available, or in remote rural districts where diagnostic knowledge of syndromes is not readily available. The proposed methodology, visual diagnostic decision support system (visual diagnostic DSS), employs machine learning (ML) algorithms and digital image processing techniques in a hybrid approach for automated diagnosis in medical genetics. This approach uses facial features in reference images of disorders to identify visual genotype-phenotype interrelationships. Our statistical method describes facial image data as principal component features and diagnoses syndromes using these features. The proposed system was trained using a real dataset of previously published face images of subjects with syndromes, which provided accurate diagnostic information. The method was tested using a leave-one-out cross-validation scheme with 15 different syndromes, each of comprised 5-9 cases, i.e., 92 cases in total. An accuracy rate of 83% was achieved using this automated diagnosis technique, which was statistically significant (p<0.01). Furthermore, the sensitivity and specificity values were 0.857 and 0.870, respectively. Our results show that the accurate classification of syndromes is feasible using ML techniques. Thus, a large number of syndromes with characteristic facial anomaly patterns could be diagnosed with similar diagnostic DSSs to that described in the present study, i.e., visual diagnostic DSS, thereby demonstrating the benefits of using hybrid image processing and ML-based computer-aided diagnostics for identifying facial phenotypes. Copyright © 2014. Published by Elsevier B.V.

Computer-aided diagnosis of alcoholism-related EEG signals.

PubMed

Acharya, U Rajendra; S, Vidya; Bhat, Shreya; Adeli, Hojjat; Adeli, Amir

2014-12-01

Alcoholism is a severe disorder that affects the functionality of neurons in the central nervous system (CNS) and alters the behavior of the affected person. Electroencephalogram (EEG) signals can be used as a diagnostic tool in the evaluation of subjects with alcoholism. The neurophysiological interpretation of EEG signals in persons with alcoholism (PWA) is based on observation and interpretation of the frequency and power in their EEGs compared to EEG signals from persons without alcoholism. This paper presents a review of the known features of EEGs obtained from PWA and proposes that the impact of alcoholism on the brain can be determined by computer-aided analysis of EEGs through extracting the minute variations in the EEG signals that can differentiate the EEGs of PWA from those of nonaffected persons. The authors advance the idea of automated computer-aided diagnosis (CAD) of alcoholism by employing the EEG signals. This is achieved through judicious combination of signal processing techniques such as wavelet, nonlinear dynamics, and chaos theory and pattern recognition and classification techniques. A CAD system is cost-effective and efficient and can be used as a decision support system by physicians in the diagnosis and treatment of alcoholism especially those who do not specialize in alcoholism or neurophysiology. It can also be of great value to rehabilitation centers to assess PWA over time and to monitor the impact of treatment aimed at minimizing or reversing the effects of the disease on the brain. A CAD system can be used to determine the extent of alcoholism-related changes in EEG signals (low, medium, high) and the effectiveness of therapeutic plans. Copyright © 2014 Elsevier Inc. All rights reserved.

Decision Aids for Naval Air ASW

DTIC Science & Technology

1980-03-15

Algorithm for Zone Optimization Investigation) NADC Developing Sonobuoy Pattern for Air ASW Search DAISY (Decision Aiding Information System) Wharton...sion making behavior. 0 Artificial intelligence sequential pattern recognition algorithm for reconstructing the decision maker’s utility functions. 0...display presenting the uncertainty area of the target. 3.1.5 Algorithm for Zone Optimization Investigation (AZOI) -- Naval Air Development Center 0 A

Decision support in psychiatry – a comparison between the diagnostic outcomes using a computerized decision support system versus manual diagnosis

PubMed Central

Bergman, Lars G; Fors, Uno GH

2008-01-01

Background Correct diagnosis in psychiatry may be improved by novel diagnostic procedures. Computerized Decision Support Systems (CDSS) are suggested to be able to improve diagnostic procedures, but some studies indicate possible problems. Therefore, it could be important to investigate CDSS systems with regard to their feasibility to improve diagnostic procedures as well as to save time. Methods This study was undertaken to compare the traditional 'paper and pencil' diagnostic method SCID1 with the computer-aided diagnostic system CB-SCID1 to ascertain processing time and accuracy of diagnoses suggested. 63 clinicians volunteered to participate in the study and to solve two paper-based cases using either a CDSS or manually. Results No major difference between paper and pencil and computer-supported diagnosis was found. Where a difference was found it was in favour of paper and pencil. For example, a significantly shorter time was found for paper and pencil for the difficult case, as compared to computer support. A significantly higher number of correct diagnoses were found in the diffilt case for the diagnosis 'Depression' using the paper and pencil method. Although a majority of the clinicians found the computer method supportive and easy to use, it took a longer time and yielded fewer correct diagnoses than with paper and pencil. Conclusion This study could not detect any major difference in diagnostic outcome between traditional paper and pencil methods and computer support for psychiatric diagnosis. Where there were significant differences, traditional paper and pencil methods were better than the tested CDSS and thus we conclude that CDSS for diagnostic procedures may interfere with diagnosis accuracy. A limitation was that most clinicians had not previously used the CDSS system under study. The results of this study, however, confirm that CDSS development for diagnostic purposes in psychiatry has much to deal with before it can be used for routine clinical purposes. PMID:18261222

The perspectives of iranian physicians and patients towards patient decision aids: a qualitative study

PubMed Central

2013-01-01

Background Patient preference is one of the main components of clinical decision making, therefore leading to the development of patient decision aids. The goal of this study was to describe physicians’ and patients’ viewpoints on the barriers and limitations of using patient decision aids in Iran, their proposed solutions, and, the benefits of using these tools. Methods This qualitative study was conducted in 2011 in Iran by holding in-depth interviews with 14 physicians and 8 arthritis patient. Interviewees were selected through purposeful and maximum variation sampling. As an example, a patient decision aid on the treatment of knee arthritis was developed upon literature reviews and gathering expert opinion, and was presented at the time of interview. Thematic analysis was conducted to analyze the data by using the OpenCode software. Results The results were summarized into three categories and ten codes. The extracted categories were the perceived benefits of using the tools, as well as the patient-related and physician-related barriers in using decision aids. The following barriers in using patient decision aids were identified in this study: lack of patients and physicians’ trainings in shared decision making, lack of specialist per capita, low treatment tariffs and lack of an exact evaluation system for patient participation in decision making. Conclusions No doubt these barriers demand the health authorities’ special attention. Hence, despite patients and physicians’ inclination toward using patient decision aids, these problems have hindered the practical usage of these tools in Iran - as a developing country. PMID:24066792

ICADx: interpretable computer aided diagnosis of breast masses

NASA Astrophysics Data System (ADS)

Kim, Seong Tae; Lee, Hakmin; Kim, Hak Gu; Ro, Yong Man

2018-02-01

In this study, a novel computer aided diagnosis (CADx) framework is devised to investigate interpretability for classifying breast masses. Recently, a deep learning technology has been successfully applied to medical image analysis including CADx. Existing deep learning based CADx approaches, however, have a limitation in explaining the diagnostic decision. In real clinical practice, clinical decisions could be made with reasonable explanation. So current deep learning approaches in CADx are limited in real world deployment. In this paper, we investigate interpretability in CADx with the proposed interpretable CADx (ICADx) framework. The proposed framework is devised with a generative adversarial network, which consists of interpretable diagnosis network and synthetic lesion generative network to learn the relationship between malignancy and a standardized description (BI-RADS). The lesion generative network and the interpretable diagnosis network compete in an adversarial learning so that the two networks are improved. The effectiveness of the proposed method was validated on public mammogram database. Experimental results showed that the proposed ICADx framework could provide the interpretability of mass as well as mass classification. It was mainly attributed to the fact that the proposed method was effectively trained to find the relationship between malignancy and interpretations via the adversarial learning. These results imply that the proposed ICADx framework could be a promising approach to develop the CADx system.

An adaptive incremental approach to constructing ensemble classifiers: application in an information-theoretic computer-aided decision system for detection of masses in mammograms.

PubMed

Mazurowski, Maciej A; Zurada, Jacek M; Tourassi, Georgia D

2009-07-01

Ensemble classifiers have been shown efficient in multiple applications. In this article, the authors explore the effectiveness of ensemble classifiers in a case-based computer-aided diagnosis system for detection of masses in mammograms. They evaluate two general ways of constructing subclassifiers by resampling of the available development dataset: Random division and random selection. Furthermore, they discuss the problem of selecting the ensemble size and propose two adaptive incremental techniques that automatically select the size for the problem at hand. All the techniques are evaluated with respect to a previously proposed information-theoretic CAD system (IT-CAD). The experimental results show that the examined ensemble techniques provide a statistically significant improvement (AUC = 0.905 +/- 0.024) in performance as compared to the original IT-CAD system (AUC = 0.865 +/- 0.029). Some of the techniques allow for a notable reduction in the total number of examples stored in the case base (to 1.3% of the original size), which, in turn, results in lower storage requirements and a shorter response time of the system. Among the methods examined in this article, the two proposed adaptive techniques are by far the most effective for this purpose. Furthermore, the authors provide some discussion and guidance for choosing the ensemble parameters.

Computer-Aided Training for Transport Planners: Experience with the Pluto Package.

ERIC Educational Resources Information Center

Bonsall, P. W.

1995-01-01

Describes the PLUTO model, an interactive computer program designed for use in education and training of city planners and engineers. Emphasizes four issues: (1) the balance between realism and simplification; (2) the design of the user interface; (3) comparative advantages of group and solo working; and (4) factors affecting the decision to…

Computer-aided Instructional System for Transmission Line Simulation.

ERIC Educational Resources Information Center

Reinhard, Erwin A.; Roth, Charles H., Jr.

A computer-aided instructional system has been developed which utilizes dynamic computer-controlled graphic displays and which requires student interaction with a computer simulation in an instructional mode. A numerical scheme has been developed for digital simulation of a uniform, distortionless transmission line with resistive terminations and…

Computers in medicine: liability issues for physicians.

PubMed

Hafner, A W; Filipowicz, A B; Whitely, W P

1989-07-01

Physicians routinely use computers to store, access, and retrieve medical information. As computer use becomes even more widespread in medicine, failure to utilize information systems may be seen as a violation of professional custom and lead to findings of professional liability. Even when a technology is not widespread, failure to incorporate it into medical practice may give rise to liability if the technology is accessible to the physician and reduces risk to the patient. Improvement in the availability of medical information sources imposes a greater burden on the physician to keep current and to obtain informed consent from patients. To routinely perform computer-assisted literature searches for informed consent and diagnosis is 'good medicine'. Clinical and diagnostic applications of computer technology now include computer-assisted decision making with the aid of sophisticated databases. Although such systems will expand the knowledge base and competence of physicians, malfunctioning software raises a major liability question. Also, complex computer-driven technology is used in direct patient care. Defective or improperly used hardware or software can lead to patient injury, thus raising additional complicated questions of professional liability and product liability.

Data mining of audiology patient records: factors influencing the choice of hearing aid type

PubMed Central

2012-01-01

Background This paper describes the analysis of a database of over 180,000 patient records, collected from over 23,000 patients, by the hearing aid clinic at James Cook University Hospital in Middlesbrough, UK. These records consist of audiograms (graphs of the faintest sounds audible to the patient at six different pitches), categorical data (such as age, gender, diagnosis and hearing aid type) and brief free text notes made by the technicians. This data is mined to determine which factors contribute to the decision to fit a BTE (worn behind the ear) hearing aid as opposed to an ITE (worn in the ear) hearing aid. Methods From PCA (principal component analysis) four main audiogram types are determined, and are related to the type of hearing aid chosen. The effects of age, gender, diagnosis, masker, mould and individual audiogram frequencies are combined into a single model by means of logistic regression. Some significant keywords are also discovered in the free text fields by using the chi-squared (χ2) test, which can also be used in the model. The final model can act a decision support tool to help decide whether an individual patient should be offered a BTE or an ITE hearing aid. Results The final model was tested using 5-fold cross validation, and was able to replicate the decisions of audiologists whether to fit an ITE or a BTE hearing aid with precision in the range 0.79 to 0.87. Conclusions A decision support system was produced to predict the type of hearing aid which should be prescribed, with an explanation facility explaining how that decision was arrived at. This system should prove useful in providing a "second opinion" for audiologists. PMID:22595091

Computer Instructional Aids for Undergraduate Control Education.

ERIC Educational Resources Information Center

Volz, Richard A.; And Others

Engineering is coming to rely more and more heavily upon the computer for computations, analyses, and graphic displays which aid the design process. A general purpose simulation system, the Time-shared Automatic Control Laboratory (TACL), and a set of computer-aided design programs, Control Oriented Interactive Graphic Analysis and Design…

Team performance in networked supervisory control of unmanned air vehicles: effects of automation, working memory, and communication content.

PubMed

McKendrick, Ryan; Shaw, Tyler; de Visser, Ewart; Saqer, Haneen; Kidwell, Brian; Parasuraman, Raja

2014-05-01

Assess team performance within a net-worked supervisory control setting while manipulating automated decision aids and monitoring team communication and working memory ability. Networked systems such as multi-unmanned air vehicle (UAV) supervision have complex properties that make prediction of human-system performance difficult. Automated decision aid can provide valuable information to operators, individual abilities can limit or facilitate team performance, and team communication patterns can alter how effectively individuals work together. We hypothesized that reliable automation, higher working memory capacity, and increased communication rates of task-relevant information would offset performance decrements attributed to high task load. Two-person teams performed a simulated air defense task with two levels of task load and three levels of automated aid reliability. Teams communicated and received decision aid messages via chat window text messages. Task Load x Automation effects were significant across all performance measures. Reliable automation limited the decline in team performance with increasing task load. Average team spatial working memory was a stronger predictor than other measures of team working memory. Frequency of team rapport and enemy location communications positively related to team performance, and word count was negatively related to team performance. Reliable decision aiding mitigated team performance decline during increased task load during multi-UAV supervisory control. Team spatial working memory, communication of spatial information, and team rapport predicted team success. An automated decision aid can improve team performance under high task load. Assessment of spatial working memory and the communication of task-relevant information can help in operator and team selection in supervisory control systems.

Ideal AFROC and FROC observers.

PubMed

Khurd, Parmeshwar; Liu, Bin; Gindi, Gene

2010-02-01

Detection of multiple lesions in images is a medically important task and free-response receiver operating characteristic (FROC) analyses and its variants, such as alternative FROC (AFROC) analyses, are commonly used to quantify performance in such tasks. However, ideal observers that optimize FROC or AFROC performance metrics have not yet been formulated in the general case. If available, such ideal observers may turn out to be valuable for imaging system optimization and in the design of computer aided diagnosis techniques for lesion detection in medical images. In this paper, we derive ideal AFROC and FROC observers. They are ideal in that they maximize, amongst all decision strategies, the area, or any partial area, under the associated AFROC or FROC curve. Calculation of observer performance for these ideal observers is computationally quite complex. We can reduce this complexity by considering forms of these observers that use false positive reports derived from signal-absent images only. We also consider a Bayes risk analysis for the multiple-signal detection task with an appropriate definition of costs. A general decision strategy that minimizes Bayes risk is derived. With particular cost constraints, this general decision strategy reduces to the decision strategy associated with the ideal AFROC or FROC observer.

Propagation Modelling and Decision Aids for Communications, Radar and Navigation Systems (La Modelisation de la Propagation et Aides a la Decision Pour les Sysemes de elecommunicaions, de Radar et de Navigation)

DTIC Science & Technology

1994-09-01

the refractive index i. can be density, temperature , ion composition, ionospheric determined from a simplified form of the Appleton- electric field...see Cannon 119941. the electron density profile is based upon the underlying neutral composition. temperature and wind together with electric field...in many of the newer HF predictions decision software , NSSDC/WDC-A-R&S 90-19, National Space aids. They also provide a very useful stand alone

The effect of patient narratives on information search in a web-based breast cancer decision aid: an eye-tracking study.

PubMed

Shaffer, Victoria A; Owens, Justin; Zikmund-Fisher, Brian J

2013-12-17

Previous research has examined the impact of patient narratives on treatment choices, but to our knowledge, no study has examined the effect of narratives on information search. Further, no research has considered the relative impact of their format (text vs video) on health care decisions in a single study. Our goal was to examine the impact of video and text-based narratives on information search in a Web-based patient decision aid for early stage breast cancer. Fifty-six women were asked to imagine that they had been diagnosed with early stage breast cancer and needed to choose between two surgical treatments (lumpectomy with radiation or mastectomy). Participants were randomly assigned to view one of four versions of a Web decision aid. Two versions of the decision aid included videos of interviews with patients and physicians or videos of interviews with physicians only. To distinguish between the effect of narratives and the effect of videos, we created two text versions of the Web decision aid by replacing the patient and physician interviews with text transcripts of the videos. Participants could freely browse the Web decision aid until they developed a treatment preference. We recorded participants' eye movements using the Tobii 1750 eye-tracking system equipped with Tobii Studio software. A priori, we defined 24 areas of interest (AOIs) in the Web decision aid. These AOIs were either separate pages of the Web decision aid or sections within a single page covering different content. We used multilevel modeling to examine the effect of narrative presence, narrative format, and their interaction on information search. There was a significant main effect of condition, P=.02; participants viewing decision aids with patient narratives spent more time searching for information than participants viewing the decision aids without narratives. The main effect of format was not significant, P=.10. However, there was a significant condition by format interaction on fixation duration, P<.001. When comparing the two video decision aids, participants viewing the narrative version spent more time searching for information than participants viewing the control version of the decision aid. In contrast, participants viewing the narrative version of the text decision aid spent less time searching for information than participants viewing the control version of the text decision aid. Further, narratives appear to have a global effect on information search; these effects were not limited to specific sections of the decision aid that contained topics discussed in the patient stories. The observed increase in fixation duration with video patient testimonials is consistent with the idea that the vividness of the video content could cause greater elaboration of the message, thereby encouraging greater information search. Conversely, because reading requires more effortful processing than watching, reading patient narratives may have decreased participant motivation to engage in more reading in the remaining sections of the Web decision aid. These findings suggest that the format of patient stories may be equally as important as their content in determining their effect on decision making. More research is needed to understand why differences in format result in fundamental differences in information search.

The Research on Application of Information Technology in sports Stadiums

NASA Astrophysics Data System (ADS)

Can, Han; Lu, Ma; Gan, Luying

With the Olympic glory in the national fitness program planning and the smooth development of China, the public's concern for the sport continues to grow, while their physical health is also increasingly fervent desired, the country launched a modern technological construction of sports facilities. Information technology applications in the sports venues in the increasingly wide range of modern venues and facilities, including not only the intelligent application of office automation systems, intelligent systems and sports facilities, communication systems for event management, ticket access control system, contest information systems, television systems, Command and Control System, but also in action including the use of computer technology, image analysis, computer-aided training athletes, sports training system and related data entry systems, decision support systems.Using documentary data method, this paper focuses on the research on application of information technology in Sports Stadiums, and try to explore its future trends.With a view to promote the growth of China's national economyand,so as to improve the students'quality and promote the cause of Chinese sports.

A Web-Based Tool to Support Shared Decision Making for People With a Psychotic Disorder: Randomized Controlled Trial and Process Evaluation

PubMed Central

Emerencia, Ando C; Boonstra, Nynke; Wunderink, Lex; de Jonge, Peter; Sytema, Sjoerd

2013-01-01

Background Mental health policy makers encourage the development of electronic decision aids to increase patient participation in medical decision making. Evidence is needed to determine whether these decision aids are helpful in clinical practice and whether they lead to increased patient involvement and better outcomes. Objective This study reports the outcome of a randomized controlled trial and process evaluation of a Web-based intervention to facilitate shared decision making for people with psychotic disorders. Methods The study was carried out in a Dutch mental health institution. Patients were recruited from 2 outpatient teams for patients with psychosis (N=250). Patients in the intervention condition (n=124) were provided an account to access a Web-based information and decision tool aimed to support patients in acquiring an overview of their needs and appropriate treatment options provided by their mental health care organization. Patients were given the opportunity to use the Web-based tool either on their own (at their home computer or at a computer of the service) or with the support of an assistant. Patients in the control group received care as usual (n=126). Half of the patients in the sample were patients experiencing a first episode of psychosis; the other half were patients with a chronic psychosis. Primary outcome was patient-perceived involvement in medical decision making, measured with the Combined Outcome Measure for Risk Communication and Treatment Decision-making Effectiveness (COMRADE). Process evaluation consisted of questionnaire-based surveys, open interviews, and researcher observation. Results In all, 73 patients completed the follow-up measurement and were included in the final analysis (response rate 29.2%). More than one-third (48/124, 38.7%) of the patients who were provided access to the Web-based decision aid used it, and most used its full functionality. No differences were found between the intervention and control conditions on perceived involvement in medical decision making (COMRADE satisfaction with communication: F1,68=0.422, P=.52; COMRADE confidence in decision: F1,67=0.086, P=.77). In addition, results of the process evaluation suggest that the intervention did not optimally fit in with routine practice of the participating teams. Conclusions The development of electronic decision aids to facilitate shared medical decision making is encouraged and many people with a psychotic disorder can work with them. This holds for both first-episode patients and long-term care patients, although the latter group might need more assistance. However, results of this paper could not support the assumption that the use of electronic decision aids increases patient involvement in medical decision making. This may be because of weak implementation of the study protocol and a low response rate. Trial Registration Dutch Trial Register (NTR) trial number: 10340; http://www.trialregister.nl/trialreg/admin/rctsearch.asp?Term=10340 (Archived by WebCite at http://www.webcitation.org/6Jj5umAeS). PMID:24100091

Possible Computer Vision Systems and Automated or Computer-Aided Edging and Trimming

Treesearch

Philip A. Araman

1990-01-01

This paper discusses research which is underway to help our industry reduce costs, increase product volume and value recovery, and market more accurately graded and described products. The research is part of a team effort to help the hardwood sawmill industry automate with computer vision systems, and computer-aided or computer controlled processing. This paper...

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

AIDS plays major role in Internet censorship ruling.

PubMed

1996-06-28

A Federal court in Philadelphia struck down the Communications Decency Act on June 11, 1996. The court panel referred to AIDS information in its decision that open access to online information outweighs the chance that children may encounter offensive information on their computer. Parents are expected to regulate what their children view. The panel focused on the Critical Path AIDS Project's website, which provides online information about HIV prevention, safer sex, and treatment. Although information about AIDS and birth control is sexually explicit, it was determined that none of the plaintiffs are commercial purveyors of pornography.

Operations management system

NASA Technical Reports Server (NTRS)

Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

1990-01-01

The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

Computer-Aided Reliability Estimation

NASA Technical Reports Server (NTRS)

Bavuso, S. J.; Stiffler, J. J.; Bryant, L. A.; Petersen, P. L.

1986-01-01

CARE III (Computer-Aided Reliability Estimation, Third Generation) helps estimate reliability of complex, redundant, fault-tolerant systems. Program specifically designed for evaluation of fault-tolerant avionics systems. However, CARE III general enough for use in evaluation of other systems as well.

Formal Methods Specification and Verification Guidebook for Software and Computer Systems. Volume 1; Planning and Technology Insertion

NASA Technical Reports Server (NTRS)

1995-01-01

The Formal Methods Specification and Verification Guidebook for Software and Computer Systems describes a set of techniques called Formal Methods (FM), and outlines their use in the specification and verification of computer systems and software. Development of increasingly complex systems has created a need for improved specification and verification techniques. NASA's Safety and Mission Quality Office has supported the investigation of techniques such as FM, which are now an accepted method for enhancing the quality of aerospace applications. The guidebook provides information for managers and practitioners who are interested in integrating FM into an existing systems development process. Information includes technical and administrative considerations that must be addressed when establishing the use of FM on a specific project. The guidebook is intended to aid decision makers in the successful application of FM to the development of high-quality systems at reasonable cost. This is the first volume of a planned two-volume set. The current volume focuses on administrative and planning considerations for the successful application of FM.

A Review of Developments in Computer-Based Systems to Image Teeth and Produce Dental Restorations

PubMed Central

Rekow, E. Dianne; Erdman, Arthur G.; Speidel, T. Michael

1987-01-01

Computer-aided design and manufacturing (CAD/CAM) make it possible to automate the creation of dental restorations. Currently practiced techniques are described. Three automated systems currently under development are described and compared. Advances in computer-aided design and computer-aided manufacturing (CAD/CAM) provide a new option for dentistry, creating an alternative technique for producing dental restorations. It is possible to create dental restorations that are automatically produced and meet or exceed current requirements for fit and occlusion.

A concurrent distributed system for aircraft tactical decision generation

NASA Technical Reports Server (NTRS)

Mcmanus, John W.

1990-01-01

A research program investigating the use of AI techniques to aid in the development of a tactical decision generator (TDG) for within visual range (WVR) air combat engagements is discussed. The application of AI programming and problem-solving methods in the development and implementation of a concurrent version of the computerized logic for air-to-air warfare simulations (CLAWS) program, a second-generation TDG, is presented. Concurrent computing environments and programming approaches are discussed, and the design and performance of prototype concurrent TDG system (Cube CLAWS) are presented. It is concluded that the Cube CLAWS has provided a useful testbed to evaluate the development of a distributed blackboard system. The project has shown that the complexity of developing specialized software on a distributed, message-passing architecture such as the Hypercube is not overwhelming, and that reasonable speedups and processor efficiency can be achieved by a distributed blackboard system. The project has also highlighted some of the costs of using a distributed approach to designing a blackboard system.

Classification of Computer-Aided Design-Computer-Aided Manufacturing Applications for the Reconstruction of Cranio-Maxillo-Facial Defects.

PubMed

Wauters, Lauri D J; Miguel-Moragas, Joan San; Mommaerts, Maurice Y

2015-11-01

To gain insight into the methodology of different computer-aided design-computer-aided manufacturing (CAD-CAM) applications for the reconstruction of cranio-maxillo-facial (CMF) defects. We reviewed and analyzed the available literature pertaining to CAD-CAM for use in CMF reconstruction. We proposed a classification system of the techniques of implant and cutting, drilling, and/or guiding template design and manufacturing. The system consisted of 4 classes (I-IV). These classes combine techniques used for both the implant and template to most accurately describe the methodology used. Our classification system can be widely applied. It should facilitate communication and immediate understanding of the methodology of CAD-CAM applications for the reconstruction of CMF defects.

Foundations of Neuromorphic Computing

DTIC Science & Technology

2013-05-01

make informed decisions quicker than our adversaries. 2.0 INTRODUCTION The increasing resolution and speed of today’s advanced sensor ...limited information about the location, access to global positioning satellite information (GPS) to aid in navigation is impeded, and communications...more autonomous capability. This is where neuromorphic computing and other bio -inspired technologies for SWaP constrained environments can play a

Mutual information-based template matching scheme for detection of breast masses: from mammography to digital breast tomosynthesis

PubMed Central

Mazurowski, Maciej A; Lo, Joseph Y; Harrawood, Brian P; Tourassi, Georgia D

2011-01-01

Development of a computational decision aid for a new medical imaging modality typically is a long and complicated process. It consists of collecting data in the form of images and annotations, development of image processing and pattern recognition algorithms for analysis of the new images and finally testing of the resulting system. Since new imaging modalities are developed more rapidly than ever before, any effort for decreasing the time and cost of this development process could result in maximizing the benefit of the new imaging modality to patients by making the computer aids quickly available to radiologists that interpret the images. In this paper, we make a step in this direction and investigate the possibility of translating the knowledge about the detection problem from one imaging modality to another. Specifically, we present a computer-aided detection (CAD) system for mammographic masses that uses a mutual information-based template matching scheme with intelligently selected templates. We presented principles of template matching with mutual information for mammography before. In this paper, we present an implementation of those principles in a complete computer-aided detection system. The proposed system, through an automatic optimization process, chooses the most useful templates (mammographic regions of interest) using a large database of previously collected and annotated mammograms. Through this process, the knowledge about the task of detecting masses in mammograms is incorporated in the system. Then we evaluate whether our system developed for screen-film mammograms can be successfully applied not only to other mammograms but also to digital breast tomosynthesis (DBT) reconstructed slices without adding any DBT cases for training. Our rationale is that since mutual information is known to be a robust intermodality image similarity measure, it has high potential of transferring knowledge between modalities in the context of the mass detection task. Experimental evaluation of the system on mammograms showed competitive performance compared to other mammography CAD systems recently published in the literature. When the system was applied “as-is” to DBT, its performance was notably worse than that for mammograms. However, with a simple additional preprocessing step, the performance of the system reached levels similar to that obtained for mammograms. In conclusion, the presented CAD system not only performed competitively on screen-film mammograms but it also performed robustly on DBT showing that direct transfer of knowledge across breast imaging modalities for mass detection is in fact possible. PMID:21554985

Hearing Impairments. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on advances in electronic aids, computers, telecommunications, and videodiscs to assist students with hearing impairments. Electronic aids include hearing aids, telephone devices for the deaf, teletypes, closed captioning systems for television, and…

Patient Decision Aids Improve Decision Quality and Patient Experience and Reduce Surgical Rates in Routine Orthopaedic Care: A Prospective Cohort Study.

PubMed

Sepucha, Karen; Atlas, Steven J; Chang, Yuchiao; Dorrwachter, Janet; Freiberg, Andrew; Mangla, Mahima; Rubash, Harry E; Simmons, Leigh H; Cha, Thomas

2017-08-02

Patient decision aids are effective in randomized controlled trials, yet little is known about their impact in routine care. The purpose of this study was to examine whether decision aids increase shared decision-making when used in routine care. A prospective study was designed to evaluate the impact of a quality improvement project to increase the use of decision aids for patients with hip or knee osteoarthritis, lumbar disc herniation, or lumbar spinal stenosis. A usual care cohort was enrolled before the quality improvement project and an intervention cohort was enrolled after the project. Participants were surveyed 1 week after a specialist visit, and surgical status was collected at 6 months. Regression analyses adjusted for clustering of patients within clinicians and examined the impact on knowledge, patient reports of shared decision-making in the visit, and surgical rates. With 550 surveys, the study had 80% to 90% power to detect a difference in these key outcomes. The response rates to the 1-week survey were 70.6% (324 of 459) for the usual care cohort and 70.2% (328 of 467) for the intervention cohort. There was no significant difference (p > 0.05) in any patient characteristic between the 2 cohorts. More patients received decision aids in the intervention cohort at 63.6% compared with the usual care cohort at 27.3% (p = 0.007). Decision aid use was associated with higher knowledge scores, with a mean difference of 18.7 points (95% confidence interval [CI], 11.4 to 26.1 points; p < 0.001) for the usual care cohort and 15.3 points (95% CI, 7.5 to 23.0 points; p = 0.002) for the intervention cohort. Patients reported more shared decision-making (p = 0.009) in the visit with their surgeon in the intervention cohort, with a mean Shared Decision-Making Process score (and standard deviation) of 66.9 ± 27.5 points, compared with the usual care cohort at 62.5 ± 28.6 points. The majority of patients received their preferred treatment, and this did not differ by cohort or decision aid use. Surgical rates were lower in the intervention cohort for those who received the decision aids at 42.3% compared with 58.8% for those who did not receive decision aids (p = 0.023) and in the usual care cohort at 44.3% for those who received decision aids compared with 55.7% for those who did not receive them (p = 0.45). The quality improvement project successfully integrated patient decision aids into a busy orthopaedic clinic. When used in routine care, decision aids are associated with increased knowledge, more shared decision-making, and lower surgical rates. There is increasing pressure to design systems of care that inform and involve patients in decisions about elective surgery. In this study, the authors found that patient decision aids, when used as part of routine orthopaedic care, were associated with increased knowledge, more shared decision-making, higher patient experience ratings, and lower surgical rates.

Computer-aided design and computer science technology

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Voigt, S. J.

1976-01-01

A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

Complacency and Automation Bias in the Use of Imperfect Automation.

PubMed

Wickens, Christopher D; Clegg, Benjamin A; Vieane, Alex Z; Sebok, Angelia L

2015-08-01

We examine the effects of two different kinds of decision-aiding automation errors on human-automation interaction (HAI), occurring at the first failure following repeated exposure to correctly functioning automation. The two errors are incorrect advice, triggering the automation bias, and missing advice, reflecting complacency. Contrasts between analogous automation errors in alerting systems, rather than decision aiding, have revealed that alerting false alarms are more problematic to HAI than alerting misses are. Prior research in decision aiding, although contrasting the two aiding errors (incorrect vs. missing), has confounded error expectancy. Participants performed an environmental process control simulation with and without decision aiding. For those with the aid, automation dependence was created through several trials of perfect aiding performance, and an unexpected automation error was then imposed in which automation was either gone (one group) or wrong (a second group). A control group received no automation support. The correct aid supported faster and more accurate diagnosis and lower workload. The aid failure degraded all three variables, but "automation wrong" had a much greater effect on accuracy, reflecting the automation bias, than did "automation gone," reflecting the impact of complacency. Some complacency was manifested for automation gone, by a longer latency and more modest reduction in accuracy. Automation wrong, creating the automation bias, appears to be a more problematic form of automation error than automation gone, reflecting complacency. Decision-aiding automation should indicate its lower degree of confidence in uncertain environments to avoid the automation bias. © 2015, Human Factors and Ergonomics Society.

Pulmonary lobar volumetry using novel volumetric computer-aided diagnosis and computed tomography

PubMed Central

Iwano, Shingo; Kitano, Mariko; Matsuo, Keiji; Kawakami, Kenichi; Koike, Wataru; Kishimoto, Mariko; Inoue, Tsutomu; Li, Yuanzhong; Naganawa, Shinji

2013-01-01

OBJECTIVES To compare the accuracy of pulmonary lobar volumetry using the conventional number of segments method and novel volumetric computer-aided diagnosis using 3D computed tomography images. METHODS We acquired 50 consecutive preoperative 3D computed tomography examinations for lung tumours reconstructed at 1-mm slice thicknesses. We calculated the lobar volume and the emphysematous lobar volume < −950 HU of each lobe using (i) the slice-by-slice method (reference standard), (ii) number of segments method, and (iii) semi-automatic and (iv) automatic computer-aided diagnosis. We determined Pearson correlation coefficients between the reference standard and the three other methods for lobar volumes and emphysematous lobar volumes. We also compared the relative errors among the three measurement methods. RESULTS Both semi-automatic and automatic computer-aided diagnosis results were more strongly correlated with the reference standard than the number of segments method. The correlation coefficients for automatic computer-aided diagnosis were slightly lower than those for semi-automatic computer-aided diagnosis because there was one outlier among 50 cases (2%) in the right upper lobe and two outliers among 50 cases (4%) in the other lobes. The number of segments method relative error was significantly greater than those for semi-automatic and automatic computer-aided diagnosis (P < 0.001). The computational time for automatic computer-aided diagnosis was 1/2 to 2/3 than that of semi-automatic computer-aided diagnosis. CONCLUSIONS A novel lobar volumetry computer-aided diagnosis system could more precisely measure lobar volumes than the conventional number of segments method. Because semi-automatic computer-aided diagnosis and automatic computer-aided diagnosis were complementary, in clinical use, it would be more practical to first measure volumes by automatic computer-aided diagnosis, and then use semi-automatic measurements if automatic computer-aided diagnosis failed. PMID:23526418

The Effect of Patient Narratives on Information Search in a Web-Based Breast Cancer Decision Aid: An Eye-Tracking Study

PubMed Central

Owens, Justin; Zikmund-Fisher, Brian J

2013-01-01

Background Previous research has examined the impact of patient narratives on treatment choices, but to our knowledge, no study has examined the effect of narratives on information search. Further, no research has considered the relative impact of their format (text vs video) on health care decisions in a single study. Objective Our goal was to examine the impact of video and text-based narratives on information search in a Web-based patient decision aid for early stage breast cancer. Methods Fifty-six women were asked to imagine that they had been diagnosed with early stage breast cancer and needed to choose between two surgical treatments (lumpectomy with radiation or mastectomy). Participants were randomly assigned to view one of four versions of a Web decision aid. Two versions of the decision aid included videos of interviews with patients and physicians or videos of interviews with physicians only. To distinguish between the effect of narratives and the effect of videos, we created two text versions of the Web decision aid by replacing the patient and physician interviews with text transcripts of the videos. Participants could freely browse the Web decision aid until they developed a treatment preference. We recorded participants’ eye movements using the Tobii 1750 eye-tracking system equipped with Tobii Studio software. A priori, we defined 24 areas of interest (AOIs) in the Web decision aid. These AOIs were either separate pages of the Web decision aid or sections within a single page covering different content. Results We used multilevel modeling to examine the effect of narrative presence, narrative format, and their interaction on information search. There was a significant main effect of condition, P=.02; participants viewing decision aids with patient narratives spent more time searching for information than participants viewing the decision aids without narratives. The main effect of format was not significant, P=.10. However, there was a significant condition by format interaction on fixation duration, P<.001. When comparing the two video decision aids, participants viewing the narrative version spent more time searching for information than participants viewing the control version of the decision aid. In contrast, participants viewing the narrative version of the text decision aid spent less time searching for information than participants viewing the control version of the text decision aid. Further, narratives appear to have a global effect on information search; these effects were not limited to specific sections of the decision aid that contained topics discussed in the patient stories. Conclusions The observed increase in fixation duration with video patient testimonials is consistent with the idea that the vividness of the video content could cause greater elaboration of the message, thereby encouraging greater information search. Conversely, because reading requires more effortful processing than watching, reading patient narratives may have decreased participant motivation to engage in more reading in the remaining sections of the Web decision aid. These findings suggest that the format of patient stories may be equally as important as their content in determining their effect on decision making. More research is needed to understand why differences in format result in fundamental differences in information search. PMID:24345424

CSAR (Combat, Search and Rescue) Aide: Design Requirements for a Combat Search and Rescue Decision Support System for Joint Rescue Coordination Centers

DTIC Science & Technology

1989-06-01

with acetate depicting intelligence estimates of the order of battle (updated manually by intelligence specialists), in regulations, manuals , and a...mundane tasks (e.g. typing messages, filling out forms, and chasing down data) must be performed manually . The possibility of an important fact...formulate the requirements for CSAR AIDE. 2-1 D?cisiion Support Systems A Decision Support System (DSS) is a "systea ( manual or automated) that

Space Technology - Game Changing Development NASA Facts: Autonomous Medical Operations

NASA Technical Reports Server (NTRS)

Thompson, David E.

2018-01-01

The AMO (Autonomous Medical Operations) Project is working extensively to train medical models on the reliability and confidence of computer-aided interpretation of ultrasound images in various clinical settings, and of various anatomical structures. AI (Artificial Intelligence) algorithms recognize and classify features in the ultrasound images, and these are compared to those features that clinicians use to diagnose diseases. The acquisition of clinically validated image assessment and the use of the AI algorithms constitutes fundamental baseline for a Medical Decision Support System that will advise crew on long-duration, remote missions.

Software Tools for Shipbuilding Productivity

DTIC Science & Technology

1984-12-01

shipbuilding, is that design, manufacturing and robotic technology applications to shipbuilding have been proven. all aspects of shipbuilding is now a task...technical information about the process of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) effectively has been a problem of serious and...Design (CAD) 3.4.1 CAD System Components 3.4.2 CAD System Benefits 3.4.3 New and Future CAD Technologies Computer Aided Manufacturing (CAM) 3.5.1 CAM

Decision aids for people facing health treatment or screening decisions.

PubMed

Stacey, Dawn; Légaré, France; Col, Nananda F; Bennett, Carol L; Barry, Michael J; Eden, Karen B; Holmes-Rovner, Margaret; Llewellyn-Thomas, Hilary; Lyddiatt, Anne; Thomson, Richard; Trevena, Lyndal; Wu, Julie H C

2014-01-28

Decision aids are intended to help people participate in decisions that involve weighing the benefits and harms of treatment options often with scientific uncertainty. To assess the effects of decision aids for people facing treatment or screening decisions. For this update, we searched from 2009 to June 2012 in MEDLINE; CENTRAL; EMBASE; PsycINFO; and grey literature. Cumulatively, we have searched each database since its start date including CINAHL (to September 2008). We included published randomized controlled trials of decision aids, which are interventions designed to support patients' decision making by making explicit the decision, providing information about treatment or screening options and their associated outcomes, compared to usual care and/or alternative interventions. We excluded studies of participants making hypothetical decisions. Two review authors independently screened citations for inclusion, extracted data, and assessed risk of bias. The primary outcomes, based on the International Patient Decision Aid Standards (IPDAS), were:A) 'choice made' attributes;B) 'decision-making process' attributes.Secondary outcomes were behavioral, health, and health-system effects. We pooled results using mean differences (MD) and relative risks (RR), applying a random-effects model. This update includes 33 new studies for a total of 115 studies involving 34,444 participants. For risk of bias, selective outcome reporting and blinding of participants and personnel were mostly rated as unclear due to inadequate reporting. Based on 7 items, 8 of 115 studies had high risk of bias for 1 or 2 items each.Of 115 included studies, 88 (76.5%) used at least one of the IPDAS effectiveness criteria: A) 'choice made' attributes criteria: knowledge scores (76 studies); accurate risk perceptions (25 studies); and informed value-based choice (20 studies); and B) 'decision-making process' attributes criteria: feeling informed (34 studies) and feeling clear about values (29 studies).A) Criteria involving 'choice made' attributes:Compared to usual care, decision aids increased knowledge (MD 13.34 out of 100; 95% confidence interval (CI) 11.17 to 15.51; n = 42). When more detailed decision aids were compared to simple decision aids, the relative improvement in knowledge was significant (MD 5.52 out of 100; 95% CI 3.90 to 7.15; n = 19). Exposure to a decision aid with expressed probabilities resulted in a higher proportion of people with accurate risk perceptions (RR 1.82; 95% CI 1.52 to 2.16; n = 19). Exposure to a decision aid with explicit values clarification resulted in a higher proportion of patients choosing an option congruent with their values (RR 1.51; 95% CI 1.17 to 1.96; n = 13).B) Criteria involving 'decision-making process' attributes:Decision aids compared to usual care interventions resulted in:a) lower decisional conflict related to feeling uninformed (MD -7.26 of 100; 95% CI -9.73 to -4.78; n = 22) and feeling unclear about personal values (MD -6.09; 95% CI -8.50 to -3.67; n = 18);b) reduced proportions of people who were passive in decision making (RR 0.66; 95% CI 0.53 to 0.81; n = 14); andc) reduced proportions of people who remained undecided post-intervention (RR 0.59; 95% CI 0.47 to 0.72; n = 18).Decision aids appeared to have a positive effect on patient-practitioner communication in all nine studies that measured this outcome. For satisfaction with the decision (n = 20), decision-making process (n = 17), and/or preparation for decision making (n = 3), those exposed to a decision aid were either more satisfied, or there was no difference between the decision aid versus comparison interventions. No studies evaluated decision-making process attributes for helping patients to recognize that a decision needs to be made, or understanding that values affect the choice.C) Secondary outcomes Exposure to decision aids compared to usual care reduced the number of people of choosing major elective invasive surgery in favour of more conservative options (RR 0.79; 95% CI 0.68 to 0.93; n = 15). Exposure to decision aids compared to usual care reduced the number of people choosing to have prostate-specific antigen screening (RR 0.87; 95% CI 0.77 to 0.98; n = 9). When detailed compared to simple decision aids were used, fewer people chose menopausal hormone therapy (RR 0.73; 95% CI 0.55 to 0.98; n = 3). For other decisions, the effect on choices was variable.The effect of decision aids on length of consultation varied from 8 minutes shorter to 23 minutes longer (median 2.55 minutes longer) with 2 studies indicating statistically-significantly longer, 1 study shorter, and 6 studies reporting no difference in consultation length. Groups of patients receiving decision aids do not appear to differ from comparison groups in terms of anxiety (n = 30), general health outcomes (n = 11), and condition-specific health outcomes (n = 11). The effects of decision aids on other outcomes (adherence to the decision, costs/resource use) were inconclusive. There is high-quality evidence that decision aids compared to usual care improve people's knowledge regarding options, and reduce their decisional conflict related to feeling uninformed and unclear about their personal values. There is moderate-quality evidence that decision aids compared to usual care stimulate people to take a more active role in decision making, and improve accurate risk perceptions when probabilities are included in decision aids, compared to not being included. There is low-quality evidence that decision aids improve congruence between the chosen option and the patient's values.New for this updated review is further evidence indicating more informed, values-based choices, and improved patient-practitioner communication. There is a variable effect of decision aids on length of consultation. Consistent with findings from the previous review, decision aids have a variable effect on choices. They reduce the number of people choosing discretionary surgery and have no apparent adverse effects on health outcomes or satisfaction. The effects on adherence with the chosen option, cost-effectiveness, use with lower literacy populations, and level of detail needed in decision aids need further evaluation. Little is known about the degree of detail that decision aids need in order to have a positive effect on attributes of the choice made, or the decision-making process.

Low-Cost Computer-Aided Instruction/Computer-Managed Instruction (CAI/CMI) System: Feasibility Study. Final Report.

ERIC Educational Resources Information Center

Lintz, Larry M.; And Others

This study investigated the feasibility of a low cost computer-aided instruction/computer-managed instruction (CAI/CMI) system. Air Force instructors and training supervisors were surveyed to determine the potential payoffs of various CAI and CMI functions. Results indicated that a wide range of capabilities had potential for resident technical…

Deep learning in mammography and breast histology, an overview and future trends.

PubMed

Hamidinekoo, Azam; Denton, Erika; Rampun, Andrik; Honnor, Kate; Zwiggelaar, Reyer

2018-07-01

Recent improvements in biomedical image analysis using deep learning based neural networks could be exploited to enhance the performance of Computer Aided Diagnosis (CAD) systems. Considering the importance of breast cancer worldwide and the promising results reported by deep learning based methods in breast imaging, an overview of the recent state-of-the-art deep learning based CAD systems developed for mammography and breast histopathology images is presented. In this study, the relationship between mammography and histopathology phenotypes is described, which takes biological aspects into account. We propose a computer based breast cancer modelling approach: the Mammography-Histology-Phenotype-Linking-Model, which develops a mapping of features/phenotypes between mammographic abnormalities and their histopathological representation. Challenges are discussed along with the potential contribution of such a system to clinical decision making and treatment management. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Computational Models of Human Performance: Validation of Memory and Procedural Representation in Advanced Air/Ground Simulation

NASA Technical Reports Server (NTRS)

Corker, Kevin M.; Labacqz, J. Victor (Technical Monitor)

1997-01-01

The Man-Machine Interaction Design and Analysis System (MIDAS) under joint U.S. Army and NASA cooperative is intended to assist designers of complex human/automation systems in successfully incorporating human performance capabilities and limitations into decision and action support systems. MIDAS is a computational representation of multiple human operators, selected perceptual, cognitive, and physical functions of those operators, and the physical/functional representation of the equipment with which they operate. MIDAS has been used as an integrated predictive framework for the investigation of human/machine systems, particularly in situations with high demands on the operators. We have extended the human performance models to include representation of both human operators and intelligent aiding systems in flight management, and air traffic service. The focus of this development is to predict human performance in response to aiding system developed to identify aircraft conflict and to assist in the shared authority for resolution. The demands of this application requires representation of many intelligent agents sharing world-models, coordinating action/intention, and cooperative scheduling of goals and action in an somewhat unpredictable world of operations. In recent applications to airborne systems development, MIDAS has demonstrated an ability to predict flight crew decision-making and procedural behavior when interacting with automated flight management systems and Air Traffic Control. In this paper, we describe two enhancements to MIDAS. The first involves the addition of working memory in the form of an articulatory buffer for verbal communication protocols and a visuo-spatial buffer for communications via digital datalink. The second enhancement is a representation of multiple operators working as a team. This enhanced model was used to predict the performance of human flight crews and their level of compliance with commercial aviation communication procedures. We show how the data produced by MIDAS compares with flight crew performance data from full mission simulations. Finally, we discuss the use of these features to study communication issues connected with aircraft-based separation assurance.

Shared decision making and use of decision AIDS for localized prostate cancer : perceptions from radiation oncologists and urologists.

PubMed

Wang, Elyn H; Gross, Cary P; Tilburt, Jon C; Yu, James B; Nguyen, Paul L; Smaldone, Marc C; Shah, Nilay D; Abouassally, Robert; Sun, Maxine; Kim, Simon P

2015-05-01

The current attitudes of prostate cancer specialists toward decision aids and their use in clinical practice to facilitate shared decision making are poorly understood. To assess attitudes toward decision aids and their dissemination in clinical practice. A survey was mailed to a national random sample of 1422 specialists (711 radiation oncologists and 711 urologists) in the United States from November 1, 2011, through April 30, 2012. Respondents were asked about familiarity, perceptions, and use of decision aids for clinically localized prostate cancer and trust in various professional societies in developing decision aids. The Pearson χ2 test was used to test for bivariate associations between physician characteristics and outcomes. Similar response rates were observed for radiation oncologists and urologists (44.0% vs 46.1%; P=.46). Although most respondents had some familiarity with decision aids, only 35.5% currently use a decision aid in clinic practice. The most commonly cited barriers to decision aid use included the perception that their ability to estimate the risk of recurrence was superior to that of decision aids (7.7% in those not using decision aids and 26.2% in those using decision aids; P<.001) and the concern that patients could not process information from a decision aid (7.6% in those not using decision aids and 23.7% in those using decision aids; P<.001). In assessing trust in decision aids established by various professional medical societies, specialists consistently reported trust in favor of their respective organizations, with 9.2% being very confident and 59.2% being moderately confident (P=.01). Use of decision aids among specialists treating patients with prostate cancer is relatively low. Efforts to address barriers to clinical implementation of decision aids may facilitate greater shared decision making for patients diagnosed as having prostate cancer.

Mass balances for a biological life support system simulation model

NASA Technical Reports Server (NTRS)

Volk, Tyler; Rummel, John D.

1987-01-01

Design decisions to aid the development of future space based biological life support systems (BLSS) can be made with simulation models. The biochemistry stoichiometry was developed for: (1) protein, carbohydrate, fat, fiber, and lignin production in the edible and inedible parts of plants; (2) food consumption and production of organic solids in urine, feces, and wash water by the humans; and (3) operation of the waste processor. Flux values for all components are derived for a steady state system with wheat as the sole food source. The large scale dynamics of a materially closed (BLSS) computer model is described in a companion paper. An extension of this methodology can explore multifood systems and more complex biochemical dynamics while maintaining whole system closure as a focus.

Further Development and Application of GEOFRAC-FLOW to a Geothermal Reservoir

DOE Office of Scientific and Technical Information (OSTI.GOV)

Einstein, Herbert; Vecchiarelli, Alessandra

2014-05-01

GEOFRAC is a three-dimensional, geology-based, geometric-mechanical, hierarchical, stochastic model of natural rock fracture systems. The main characteristics of GEOFRAC are its use of statistical input representing fracture patterns in the field in form of the fracture intensity P32 (fracture area per volume) and the best estimate fracture size E(A). This information can be obtained from boreholes or scanlines on the surface, on the one hand, and from window sampling of fracture traces on the other hand. In the context of this project, “Recovery Act - Decision Aids for Geothermal Systems”, GEOFRAC was further developed into GEOFRAC-FLOW as has been reportedmore » in the reports, “Decision Aids for Geothermal Systems - Fracture Pattern Modelling” and “Decision Aids for Geothermal Systems - Fracture Flow Modeling”. GEOFRAC-FLOW allows one to determine preferred, interconnected fracture paths and the flow through them.« less

A Simulation Based Approach for Contingency Planning for Aircraft Turnaround Operation System Activities in Airline Hubs

NASA Technical Reports Server (NTRS)

Adeleye, Sanya; Chung, Christopher

2006-01-01

Commercial aircraft undergo a significant number of maintenance and logistical activities during the turnaround operation at the departure gate. By analyzing the sequencing of these activities, more effective turnaround contingency plans may be developed for logistical and maintenance disruptions. Turnaround contingency plans are particularly important as any kind of delay in a hub based system may cascade into further delays with subsequent connections. The contingency sequencing of the maintenance and logistical turnaround activities were analyzed using a combined network and computer simulation modeling approach. Experimental analysis of both current and alternative policies provides a framework to aid in more effective tactical decision making.

Visual and computer software-aided estimates of Dupuytren's contractures: correlation with clinical goniometric measurements.

PubMed

Smith, R P; Dias, J J; Ullah, A; Bhowal, B

2009-05-01

Corrective surgery for Dupuytren's disease represents a significant proportion of a hand surgeon's workload. The decision to go ahead with surgery and the success of surgery requires measuring the degree of contracture of the diseased finger(s). This is performed in clinic with a goniometer, pre- and postoperatively. Monitoring the recurrence of the contracture can inform on surgical outcome, research and audit. We compared visual and computer software-aided estimation of Dupuytren's contractures to clinical goniometric measurements in 60 patients with Dupuytren's disease. Patients' hands were digitally photographed. There were 76 contracted finger joints--70 proximal interphalangeal joints and six distal interphalangeal joints. The degrees of contracture of these images were visually assessed by six orthopaedic staff of differing seniority and re-assessed with computer software. Across assessors, the Pearson correlation between the goniometric measurements and the visual estimations was 0.83 and this significantly improved to 0.88 with computer software. Reliability with intra-class correlations achieved 0.78 and 0.92 for the visual and computer-aided estimations, respectively, and with test-retest analysis, 0.92 for visual estimation and 0.95 for computer-aided measurements. Visual estimations of Dupuytren's contractures correlate well with actual clinical goniometric measurements and improve further if measured with computer software. Digital images permit monitoring of contracture after surgery and may facilitate research into disease progression and auditing of surgical technique.

Exchange Service Station Gasoline Pumping Operation Simulation.

DTIC Science & Technology

1980-06-01

an event step simulation model of the Naval operation.s The model has been developed as a management tool and aid to decision making. The environment...has been developed as a management tool and aid to decision making. The environment in which the system operates is discussed and the significant...of the variables such as arrival rates; while others are primarily controlled by managerial decision making, for example the number of pumps available

A tutorial on the use of ROC analysis for computer-aided diagnostic systems.

PubMed

Scheipers, Ulrich; Perrey, Christian; Siebers, Stefan; Hansen, Christian; Ermert, Helmut

2005-07-01

The application of the receiver operating characteristic (ROC) curve for computer-aided diagnostic systems is reviewed. A statistical framework is presented and different methods of evaluating the classification performance of computer-aided diagnostic systems, and, in particular, systems for ultrasonic tissue characterization, are derived. Most classifiers that are used today are dependent on a separation threshold, which can be chosen freely in many cases. The separation threshold separates the range of output values of the classification system into different target groups, thus conducting the actual classification process. In the first part of this paper, threshold specific performance measures, e.g., sensitivity and specificity, are presented. In the second part, a threshold-independent performance measure, the area under the ROC curve, is reviewed. Only the use of separation threshold-independent performance measures provides classification results that are overall representative for computer-aided diagnostic systems. The following text was motivated by the lack of a complete and definite discussion of the underlying subject in available textbooks, references and publications. Most manuscripts published so far address the theme of performance evaluation using ROC analysis in a manner too general to be practical for everyday use in the development of computer-aided diagnostic systems. Nowadays, the user of computer-aided diagnostic systems typically handles huge amounts of numerical data, not always distributed normally. Many assumptions made in more or less theoretical works on ROC analysis are no longer valid for real-life data. The paper aims at closing the gap between theoretical works and real-life data. The review provides the interested scientist with information needed to conduct ROC analysis and to integrate algorithms performing ROC analysis into classification systems while understanding the basic principles of classification.

Key Issues in Instructional Computer Graphics.

ERIC Educational Resources Information Center

Wozny, Michael J.

1981-01-01

Addresses key issues facing universities which plan to establish instructional computer graphics facilities, including computer-aided design/computer aided manufacturing systems, role in curriculum, hardware, software, writing instructional software, faculty involvement, operations, and research. Thirty-seven references and two appendices are…

Modeling paradigms for medical diagnostic decision support: a survey and future directions.

PubMed

Wagholikar, Kavishwar B; Sundararajan, Vijayraghavan; Deshpande, Ashok W

2012-10-01

Use of computer based decision tools to aid clinical decision making, has been a primary goal of research in biomedical informatics. Research in the last five decades has led to the development of Medical Decision Support (MDS) applications using a variety of modeling techniques, for a diverse range of medical decision problems. This paper surveys literature on modeling techniques for diagnostic decision support, with a focus on decision accuracy. Trends and shortcomings of research in this area are discussed and future directions are provided. The authors suggest that-(i) Improvement in the accuracy of MDS application may be possible by modeling of vague and temporal data, research on inference algorithms, integration of patient information from diverse sources and improvement in gene profiling algorithms; (ii) MDS research would be facilitated by public release of de-identified medical datasets, and development of opensource data-mining tool kits; (iii) Comparative evaluations of different modeling techniques are required to understand characteristics of the techniques, which can guide developers in choice of technique for a particular medical decision problem; and (iv) Evaluations of MDS applications in clinical setting are necessary to foster physicians' utilization of these decision aids.

Who Qualifies for Financial Aid?

ERIC Educational Resources Information Center

Deitch, Kenneth M.

1982-01-01

The decisions an institution makes about tuition and student aid constitute its pricing policy and locate its market position. An analytical device called the "aid eligibility frontier" is used to analyze the current pricing system; potential problems are discussed. (Author/MSE)

Physicians' intentions and use of three patient decision aids

PubMed Central

Graham, Ian D; Logan, Jo; Bennett, Carol L; Presseau, Justin; O'Connor, Annette M; Mitchell, Susan L; Tetroe, Jacqueline M; Cranney, Ann; Hebert, Paul; Aaron, Shawn D

2007-01-01

Background Decision aids are evidence based tools that assist patients in making informed values-based choices and supplement the patient-clinician interaction. While there is evidence to show that decision aids improve key indicators of patients' decision quality, relatively little is known about physicians' acceptance of decision aids or factors that influence their decision to use them. The purpose of this study was to describe physicians' perceptions of three decision aids, their expressed intent to use them, and their subsequent use of them. Methods We conducted a cross-sectional survey of random samples of Canadian respirologists, family physicians, and geriatricians. Three decision aids representing a range of health decisions were evaluated. The survey elicited physicians' opinions on the characteristics of the decision aid and their willingness to use it. Physicians who indicated a strong likelihood of using the decision aid were contacted three months later regarding their actual use of the decision aid. Results Of the 580 eligible physicians, 47% (n = 270) returned completed questionnaires. More than 85% of the respondents felt the decision aid was well developed and that it presented the essential information for decision making in an understandable, balanced, and unbiased manner. A majority of respondents (>80%) also felt that the decision aid would guide patients in a logical way, preparing them to participate in decision making and to reach a decision. Fewer physicians (<60%) felt the decision aid would improve the quality of patient visits or be easily implemented into practice and very few (27%) felt that the decision aid would save time. Physicians' intentions to use the decision aid were related to their comfort with offering it to patients, the decision aid topic, and the perceived ease of implementing it into practice. While 54% of the surveyed physicians indicated they would use the decision aid, less than a third followed through with this intention. Conclusion Despite strong support for the format, content, and quality of patient decision aids, and physicians' stated intentions to adopt them into clinical practice, most did not use them within three months of completing the survey. There is a wide gap between intention and behaviour. Further research is required to study the determinants of this intention-behaviour gap and to develop interventions aimed at barriers to physicians' use of decision aids. PMID:17617908

INDIVIDUALIZING UNIVERSITY INSTRUCTION, EXPLORING COMPUTER POTENTIAL TO AID COLLEGE TEACHERS BY DIRECTING THE LEARNING PROCESS. INTER-UNIVERSITY PROJECT ONE, PUBLICATIONS SERIES.

ERIC Educational Resources Information Center

FALL, CHARLES R.

THIS DOCUMENT CONCLUDES THAT INSTRUCTION BY COMPUTER-BASED RESOURCE UNITS CAN FACILITATE LEARNING AND PROVIDE THE INSTRUCTOR WITH VALUABLE ASSISTANCE. BY PRE-PLANNING THE TEACHING-LEARNING SITUATION, RESOURCE UNITS CAN FREE THE INSTRUCTOR FOR DECISION-MAKING TASKS. RESOURCE UNITS CAN ALSO PROVIDE APPROPRIATE LEARNING GOALS AND STUDY GUIDES TO EACH…

Investigations in Computer-Aided Instruction and Computer-Aided Controls. Final Report.

ERIC Educational Resources Information Center

Rosenberg, R.C.; And Others

These research projects, designed to delve into certain relationships between humans and computers, are focused on computer-assisted instruction and on man-computer interaction. One study demonstrates that within the limits of formal engineering theory, a computer simulated laboratory (Dynamic Systems Laboratory) can be built in which freshmen…

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology.

PubMed

Mazaro, Josá Vitor Quinelli; de Mello, Caroline Cantieri; Zavanelli, Adriana Cristina; Santiago, Joel Ferreira; Amoroso, Andressa Paschoal; Pellizzer, Eduardo Piza

2014-07-01

This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

Computer Aided Grid Interface: An Interactive CFD Pre-Processor

NASA Technical Reports Server (NTRS)

Soni, Bharat K.

1997-01-01

NASA maintains an applications oriented computational fluid dynamics (CFD) efforts complementary to and in support of the aerodynamic-propulsion design and test activities. This is especially true at NASA/MSFC where the goal is to advance and optimize present and future liquid-fueled rocket engines. Numerical grid generation plays a significant role in the fluid flow simulations utilizing CFD. An overall goal of the current project was to develop a geometry-grid generation tool that will help engineers, scientists and CFD practitioners to analyze design problems involving complex geometries in a timely fashion. This goal is accomplished by developing the CAGI: Computer Aided Grid Interface system. The CAGI system is developed by integrating CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) geometric system output and/or Initial Graphics Exchange Specification (IGES) files (including all the NASA-IGES entities), geometry manipulations and generations associated with grid constructions, and robust grid generation methodologies. This report describes the development process of the CAGI system.

Computer Aided Grid Interface: An Interactive CFD Pre-Processor

NASA Technical Reports Server (NTRS)

Soni, Bharat K.

1996-01-01

NASA maintains an applications oriented computational fluid dynamics (CFD) efforts complementary to and in support of the aerodynamic-propulsion design and test activities. This is especially true at NASA/MSFC where the goal is to advance and optimize present and future liquid-fueled rocket engines. Numerical grid generation plays a significant role in the fluid flow simulations utilizing CFD. An overall goal of the current project was to develop a geometry-grid generation tool that will help engineers, scientists and CFD practitioners to analyze design problems involving complex geometries in a timely fashion. This goal is accomplished by developing the Computer Aided Grid Interface system (CAGI). The CAGI system is developed by integrating CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) geometric system output and / or Initial Graphics Exchange Specification (IGES) files (including all the NASA-IGES entities), geometry manipulations and generations associated with grid constructions, and robust grid generation methodologies. This report describes the development process of the CAGI system.

Computational System For Rapid CFD Analysis In Engineering

NASA Technical Reports Server (NTRS)

Barson, Steven L.; Ascoli, Edward P.; Decroix, Michelle E.; Sindir, Munir M.

1995-01-01

Computational system comprising modular hardware and software sub-systems developed to accelerate and facilitate use of techniques of computational fluid dynamics (CFD) in engineering environment. Addresses integration of all aspects of CFD analysis process, including definition of hardware surfaces, generation of computational grids, CFD flow solution, and postprocessing. Incorporates interfaces for integration of all hardware and software tools needed to perform complete CFD analysis. Includes tools for efficient definition of flow geometry, generation of computational grids, computation of flows on grids, and postprocessing of flow data. System accepts geometric input from any of three basic sources: computer-aided design (CAD), computer-aided engineering (CAE), or definition by user.

Automation in future air traffic management: effects of decision aid reliability on controller performance and mental workload.

PubMed

Metzger, Ulla; Parasuraman, Raja

2005-01-01

Future air traffic management concepts envisage shared decision-making responsibilities between controllers and pilots, necessitating that controllers be supported by automated decision aids. Even as automation tools are being introduced, however, their impact on the air traffic controller is not well understood. The present experiments examined the effects of an aircraft-to-aircraft conflict decision aid on performance and mental workload of experienced, full-performance level controllers in a simulated Free Flight environment. Performance was examined with both reliable (Experiment 1) and inaccurate automation (Experiment 2). The aid improved controller performance and reduced mental workload when it functioned reliably. However, detection of a particular conflict was better under manual conditions than under automated conditions when the automation was imperfect. Potential or actual applications of the results include the design of automation and procedures for future air traffic control systems.

An adaptive incremental approach to constructing ensemble classifiers: Application in an information-theoretic computer-aided decision system for detection of masses in mammograms

PubMed Central

Mazurowski, Maciej A.; Zurada, Jacek M.; Tourassi, Georgia D.

2009-01-01

Ensemble classifiers have been shown efficient in multiple applications. In this article, the authors explore the effectiveness of ensemble classifiers in a case-based computer-aided diagnosis system for detection of masses in mammograms. They evaluate two general ways of constructing subclassifiers by resampling of the available development dataset: Random division and random selection. Furthermore, they discuss the problem of selecting the ensemble size and propose two adaptive incremental techniques that automatically select the size for the problem at hand. All the techniques are evaluated with respect to a previously proposed information-theoretic CAD system (IT-CAD). The experimental results show that the examined ensemble techniques provide a statistically significant improvement (AUC=0.905±0.024) in performance as compared to the original IT-CAD system (AUC=0.865±0.029). Some of the techniques allow for a notable reduction in the total number of examples stored in the case base (to 1.3% of the original size), which, in turn, results in lower storage requirements and a shorter response time of the system. Among the methods examined in this article, the two proposed adaptive techniques are by far the most effective for this purpose. Furthermore, the authors provide some discussion and guidance for choosing the ensemble parameters. PMID:19673196

Maintenance Communications for the 1990’s,

DTIC Science & Technology

1983-07-01

reverse aide If necessary and Identify by block n.mber) * -This study details weaknesses in the present maintenance communications system...I. I. STrTAMEr OF NEED: Survivable Maintenance Cacputer System. "- DISCUSSION: The maintenance ccmputer system aids immeasurably in the...GRAVELY, Samuel L. (VAdm, USN-Ret), "Integrated Information Display Systen - A Decision Aid ," Signal, March 1983, p.53-60. GRAVELY, Samuel L. (VAdm, USN

Decision aids for people facing health treatment or screening decisions.

PubMed

Stacey, Dawn; Légaré, France; Lewis, Krystina; Barry, Michael J; Bennett, Carol L; Eden, Karen B; Holmes-Rovner, Margaret; Llewellyn-Thomas, Hilary; Lyddiatt, Anne; Thomson, Richard; Trevena, Lyndal

2017-04-12

Decision aids are interventions that support patients by making their decisions explicit, providing information about options and associated benefits/harms, and helping clarify congruence between decisions and personal values. To assess the effects of decision aids in people facing treatment or screening decisions. Updated search (2012 to April 2015) in CENTRAL; MEDLINE; Embase; PsycINFO; and grey literature; includes CINAHL to September 2008. We included published randomized controlled trials comparing decision aids to usual care and/or alternative interventions. For this update, we excluded studies comparing detailed versus simple decision aids. Two reviewers independently screened citations for inclusion, extracted data, and assessed risk of bias. Primary outcomes, based on the International Patient Decision Aid Standards (IPDAS), were attributes related to the choice made and the decision-making process.Secondary outcomes were behavioural, health, and health system effects.We pooled results using mean differences (MDs) and risk ratios (RRs), applying a random-effects model. We conducted a subgroup analysis of studies that used the patient decision aid to prepare for the consultation and of those that used it in the consultation. We used GRADE to assess the strength of the evidence. We included 105 studies involving 31,043 participants. This update added 18 studies and removed 28 previously included studies comparing detailed versus simple decision aids. During the 'Risk of bias' assessment, we rated two items (selective reporting and blinding of participants/personnel) as mostly unclear due to inadequate reporting. Twelve of 105 studies were at high risk of bias.With regard to the attributes of the choice made, decision aids increased participants' knowledge (MD 13.27/100; 95% confidence interval (CI) 11.32 to 15.23; 52 studies; N = 13,316; high-quality evidence), accuracy of risk perceptions (RR 2.10; 95% CI 1.66 to 2.66; 17 studies; N = 5096; moderate-quality evidence), and congruency between informed values and care choices (RR 2.06; 95% CI 1.46 to 2.91; 10 studies; N = 4626; low-quality evidence) compared to usual care.Regarding attributes related to the decision-making process and compared to usual care, decision aids decreased decisional conflict related to feeling uninformed (MD -9.28/100; 95% CI -12.20 to -6.36; 27 studies; N = 5707; high-quality evidence), indecision about personal values (MD -8.81/100; 95% CI -11.99 to -5.63; 23 studies; N = 5068; high-quality evidence), and the proportion of people who were passive in decision making (RR 0.68; 95% CI 0.55 to 0.83; 16 studies; N = 3180; moderate-quality evidence).Decision aids reduced the proportion of undecided participants and appeared to have a positive effect on patient-clinician communication. Moreover, those exposed to a decision aid were either equally or more satisfied with their decision, the decision-making process, and/or the preparation for decision making compared to usual care.Decision aids also reduced the number of people choosing major elective invasive surgery in favour of more conservative options (RR 0.86; 95% CI 0.75 to 1.00; 18 studies; N = 3844), but this reduction reached statistical significance only after removing the study on prophylactic mastectomy for breast cancer gene carriers (RR 0.84; 95% CI 0.73 to 0.97; 17 studies; N = 3108). Compared to usual care, decision aids reduced the number of people choosing prostate-specific antigen screening (RR 0.88; 95% CI 0.80 to 0.98; 10 studies; N = 3996) and increased those choosing to start new medications for diabetes (RR 1.65; 95% CI 1.06 to 2.56; 4 studies; N = 447). For other testing and screening choices, mostly there were no differences between decision aids and usual care.The median effect of decision aids on length of consultation was 2.6 minutes longer (24 versus 21; 7.5% increase). The costs of the decision aid group were lower in two studies and similar to usual care in four studies. People receiving decision aids do not appear to differ from those receiving usual care in terms of anxiety, general health outcomes, and condition-specific health outcomes. Studies did not report adverse events associated with the use of decision aids.In subgroup analysis, we compared results for decision aids used in preparation for the consultation versus during the consultation, finding similar improvements in pooled analysis for knowledge and accurate risk perception. For other outcomes, we could not conduct formal subgroup analyses because there were too few studies in each subgroup. Compared to usual care across a wide variety of decision contexts, people exposed to decision aids feel more knowledgeable, better informed, and clearer about their values, and they probably have a more active role in decision making and more accurate risk perceptions. There is growing evidence that decision aids may improve values-congruent choices. There are no adverse effects on health outcomes or satisfaction. New for this updated is evidence indicating improved knowledge and accurate risk perceptions when decision aids are used either within or in preparation for the consultation. Further research is needed on the effects on adherence with the chosen option, cost-effectiveness, and use with lower literacy populations.

Computer-Aided College Algebra: Learning Components that Students Find Beneficial

ERIC Educational Resources Information Center

Aichele, Douglas B.; Francisco, Cynthia; Utley, Juliana; Wescoatt, Benjamin

2011-01-01

A mixed-method study was conducted during the Fall 2008 semester to better understand the experiences of students participating in computer-aided instruction of College Algebra using the software MyMathLab. The learning environment included a computer learning system for the majority of the instruction, a support system via focus groups (weekly…

Computer Code Aids Design Of Wings

NASA Technical Reports Server (NTRS)

Carlson, Harry W.; Darden, Christine M.

1993-01-01

AERO2S computer code developed to aid design engineers in selection and evaluation of aerodynamically efficient wing/canard and wing/horizontal-tail configurations that includes simple hinged-flap systems. Code rapidly estimates longitudinal aerodynamic characteristics of conceptual airplane lifting-surface arrangements. Developed in FORTRAN V on CDC 6000 computer system, and ported to MS-DOS environment.

A critical comparison of clinical decision instruments for computed tomographic scanning in mild closed traumatic brain injury in adolescents and adults.

PubMed

Stein, Sherman C; Fabbri, Andrea; Servadei, Franco; Glick, Henry A

2009-02-01

A number of clinical decision aids have been introduced to limit unnecessary computed tomographic scans in patients with mild traumatic brain injury. These aids differ in the risk factors they use to recommend a scan. We compare the instruments according to their sensitivity and specificity and recommend ones based on incremental benefit of correctly classifying patients as having surgical, nonsurgical, or no intracranial lesions. We performed a secondary analysis of prospectively collected database from 7,955 patients aged 10 years or older with mild traumatic brain injury to compare sensitivity and specificity of 6 common clinical decision strategies: the Canadian CT Head Rule, the Neurotraumatology Committee of the World Federation of Neurosurgical Societies, the New Orleans, the National Emergency X-Radiography Utilization Study II (NEXUS-II), the National Institute of Clinical Excellence guideline, and the Scandinavian Neurotrauma Committee guideline. Excluded from the database were patients for whom the history of trauma was unclear, the initial Glasgow Coma Scale score was less than 14, the injury was penetrating, vital signs were unstable, or who refused diagnostic tests. Patients revisiting the emergency department within 7 days were counted only once. The percentage of scans that would have been required by applying each of the 6 aids were Canadian CT head rule (high risk only) 53%, Canadian (medium & high risk) 56%, the Neurotraumatology Committee of the World Federation of Neurosurgical Societies 56%, New Orleans 69%, NEXUS-II 56%, National Institute of Clinical Excellence 71%, and the Scandinavian 50%. The 6 decision aids' sensitivities for surgical hematomas could not be distinguished statistically (P>.05). Sensitivity was 100% (95% confidence interval [CI] 96% to 100%) for NEXUS-II, 98.1% (95% CI 93% to 100%) for National Institute of Clinical Excellence, and 99.1% (95% CI 94% to 100%) for the other 4 clinical decision instruments. Sensitivity for any intracranial lesion ranged from 95.7% (95% CI 93% to 97%) (Scandinavian) to 100% (95% CI 98% to 100%) (National Institute of Clinical Excellence). In contrast, specificities varied between 30.9% (95% CI 30% to 32%) (National Institute of Clinical Excellence) and 52.9% (95% CI 52% to 54) (Scandinavian). NEXUS-II and the Scandinavian clinical decision aids displayed the best combination of sensitivity and specificity in this patient population. However, we cannot demonstrate that the higher sensitivity of NEXUS-II for surgical hematomas is statistically significant. Therefore, choosing which of the 2 clinical decision instruments to use must be based on decisionmakers' attitudes toward risk.

Computer-Aided Communication Satellite System Analysis and Optimization.

ERIC Educational Resources Information Center

Stagl, Thomas W.; And Others

Various published computer programs for fixed/broadcast communication satellite system synthesis and optimization are discussed. The rationale for selecting General Dynamics/Convair's Satellite Telecommunication Analysis and Modeling Program (STAMP) in modified form to aid in the system costing and sensitivity analysis work in the Program on…

A Cognitive-System Model for En Route Air Traffic Management

NASA Technical Reports Server (NTRS)

Corker, Kevin M.; Pisanich, Gregory; Lebacqz, J. Victor (Technical Monitor)

1998-01-01

NASA Ames Research Center has been engaged in the development of advanced air traffic management technologies whose basic form is cognitive aiding systems for air traffic controller and flight deck operations. In the design and evaluation of such systems the dynamic interaction between the airborne aiding system and the ground-based aiding systems forms a critical coupling for control. The human operator is an integral control element in the system and the optimal integration of human decision and performance parameters with those of the automation aiding systems offers a significant challenge to cognitive engineering. This paper presents a study in full mission simulation and the development of a predictive computational model of human performance. We have found that this combination of methodologies provide a powerful design-aiding process. We have extended the computational model Man Machine Integrated Design and Analysis System (N13DAS) to include representation of multiple cognitive agents (both human operators and intelligent aiding systems), operating aircraft airline operations centers and air traffic control centers in the evolving airspace. The demands of this application require the representation of many intelligent agents sharing world-models, and coordinating action/intention with cooperative scheduling of goals and actions in a potentially unpredictable world of operations. The operator's activity structures have been developed to include prioritization and interruption of multiple parallel activities among multiple operators, to provide for anticipation (knowledge of the intention and action of remote operators), and to respond to failures of the system and other operators in the system in situation-specific paradigms. We have exercised this model in a multi-air traffic sector scenario with potential conflict among aircraft at and across sector boundaries. We have modeled the control situation as a multiple closed loop system. The inner and outer loop alerting structure of air traffic management has many implications that need to be investigated to assure adequate design. First, there are control and stability factors implicit in the design. As the inner loop response time approaches that of the outer loop, system stability may be compromised in that controllers may be solving a problem the nature of which has already been changed by pilot action. Second, information exchange and information presentation for both air and ground must be designed to complement as opposed to compete with each other. Third, the level of individual and shared awareness in trajectory modification and flight conformance needs to be defined. Fourth, the level of required awareness and performance impact of mixed fleet operations and failed-mode recovery must be explored.

Uncertainty in sample estimates and the implicit loss function for soil information.

NASA Astrophysics Data System (ADS)

Lark, Murray

2015-04-01

One significant challenge in the communication of uncertain information is how to enable the sponsors of sampling exercises to make a rational choice of sample size. One way to do this is to compute the value of additional information given the loss function for errors. The loss function expresses the costs that result from decisions made using erroneous information. In certain circumstances, such as remediation of contaminated land prior to development, loss functions can be computed and used to guide rational decision making on the amount of resource to spend on sampling to collect soil information. In many circumstances the loss function cannot be obtained prior to decision making. This may be the case when multiple decisions may be based on the soil information and the costs of errors are hard to predict. The implicit loss function is proposed as a tool to aid decision making in these circumstances. Conditional on a logistical model which expresses costs of soil sampling as a function of effort, and statistical information from which the error of estimates can be modelled as a function of effort, the implicit loss function is the loss function which makes a particular decision on effort rational. In this presentation the loss function is defined and computed for a number of arbitrary decisions on sampling effort for a hypothetical soil monitoring problem. This is based on a logistical model of sampling cost parameterized from a recent geochemical survey of soil in Donegal, Ireland and on statistical parameters estimated with the aid of a process model for change in soil organic carbon. It is shown how the implicit loss function might provide a basis for reflection on a particular choice of sample size by comparing it with the values attributed to soil properties and functions. Scope for further research to develop and apply the implicit loss function to help decision making by policy makers and regulators is then discussed.

Ambiguity resolution for satellite Doppler positioning systems

NASA Technical Reports Server (NTRS)

Argentiero, P. D.; Marini, J. W.

1977-01-01

A test for ambiguity resolution was derived which was the most powerful in the sense that it maximized the probability of a correct decision. When systematic error sources were properly included in the least squares reduction process to yield an optimal solution, the test reduced to choosing the solution which provided the smaller valuation of the least squares loss function. When systematic error sources were ignored in the least squares reduction, the most powerful test was a quadratic form comparison with the weighting matrix of the quadratic form obtained by computing the pseudo-inverse of a reduced rank square matrix. A formula is presented for computing the power of the most powerful test. A numerical example is included in which the power of the test is computed for a situation which may occur during an actual satellite aided search and rescue mission.

Feasibility of web-based decision aids in neurological patients.

PubMed

van Til, Janine A; Drossaert, Constance H C; Renzenbrink, Gerbert J; Snoek, Govert J; Dijkstra, Evelien; Stiggelbout, Anne M; Ijzerman, Maarten J

2010-01-01

Decision aids (DAs) may be helpful in improving patients' participation in medical decision-making. We investigated the potential for web-based DAs in a rehabilitation population. Two self-administered DAs focused on the treatment of acquired ankle-foot impairment in stroke and the treatment of arm-hand function in cervical spinal cord injury (SCI). Data collection comprised a telephone interview and a self-reported paper questionnaire. Of the patients who agreed to participate, 39 stroke patients (44%) and 38 patients with SCI (78%) returned a questionnaire. More than 75% of patients expressed a need for more information about the treatment of disease-related impairment. The DAs were highly appreciated by both patient groups. Nearly all patients expressed a positive attitude towards the use of the web-based DAs in general practice. The DAs had a positive effect on the knowledge about the treatment alternatives in the stroke patients (P = 0.001), although not in the patients with SCI. The DAs reduced patients' conflict about treatment (P < 0.05). The effect of the DAs on patients' desired role in decision-making was limited. Web-based aids are feasible in the rehabilitation population with access to a computer and can improve the knowledge gaps in patients.

FIESTA: An operational decision aid for space network fault isolation

NASA Technical Reports Server (NTRS)

Lowe, Dawn; Quillin, Bob; Matteson, Nadine; Wilkinson, Bill; Miksell, Steve

1987-01-01

The Fault Tolerance Expert System for Tracking and Data Relay Satellite System (TDRSS) Applications (FIESTA) is a fault detection and fault diagnosis expert system being developed as a decision aid to support operations in the Network Control Center (NCC) for NASA's Space Network. The operational objectives which influenced FIESTA development are presented and an overview of the architecture used to achieve these goals are provided. The approach to the knowledge engineering effort and the methodology employed are also presented and illustrated with examples drawn from the FIESTA domain.

The impact of computer self-efficacy, computer anxiety, and perceived usability and acceptability on the efficacy of a decision support tool for colorectal cancer screening

PubMed Central

Lindblom, Katrina; Gregory, Tess; Flight, Ingrid H K; Zajac, Ian

2011-01-01

Objective This study investigated the efficacy of an internet-based personalized decision support (PDS) tool designed to aid in the decision to screen for colorectal cancer (CRC) using a fecal occult blood test. We tested whether the efficacy of the tool in influencing attitudes to screening was mediated by perceived usability and acceptability, and considered the role of computer self-efficacy and computer anxiety in these relationships. Methods Eighty-one participants aged 50–76 years worked through the on-line PDS tool and completed questionnaires on computer self-efficacy, computer anxiety, attitudes to and beliefs about CRC screening before and after exposure to the PDS, and perceived usability and acceptability of the tool. Results Repeated measures ANOVA found that PDS exposure led to a significant increase in knowledge about CRC and screening, and more positive attitudes to CRC screening as measured by factors from the Preventive Health Model. Perceived usability and acceptability of the PDS mediated changes in attitudes toward CRC screening (but not CRC knowledge), and computer self-efficacy and computer anxiety were significant predictors of individuals' perceptions of the tool. Conclusion Interventions designed to decrease computer anxiety, such as computer courses and internet training, may improve the acceptability of new health information technologies including internet-based decision support tools, increasing their impact on behavior change. PMID:21857024

Strategies for the Creation, Design and Implementation of Effective Interactive Computer-Aided Learning Software in Numerate Business Subjects--The Byzantium Experience.

ERIC Educational Resources Information Center

Wilkinson-Riddle, G. J.; Patel, Ashok

1998-01-01

Discusses courseware development, including intelligent tutoring systems, under the Teaching and Learning Technology Programme and the Byzantium project that was designed to define computer-aided learning performance standards suitable for numerate business subjects; examine reasons to use computer-aided learning; and improve access to educational…

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

ERIC Educational Resources Information Center

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

A Model for Intelligent Computer-Aided Education Systems.

ERIC Educational Resources Information Center

Du Plessis, Johan P.; And Others

1995-01-01

Proposes a model for intelligent computer-aided education systems that is based on cooperative learning, constructive problem-solving, object-oriented programming, interactive user interfaces, and expert system techniques. Future research is discussed, and a prototype for teaching mathematics to 10- to 12-year-old students is appended. (LRW)

23 CFR 771.117 - Categorical exclusions.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., computer-aided dispatching systems, radio communications systems, dynamic message signs, and security... effects can be assessed; and Federal-aid system revisions which establish classes of highways on the Federal-aid highway system. (2) Approval of utility installations along or across a transportation...

Cone Beam Computed Tomography-Dawn of A New Imaging Modality in Orthodontics

PubMed Central

Mamatha, J; Chaitra, K R; Paul, Renji K; George, Merin; Anitha, J; Khanna, Bharti

2015-01-01

Today, we are in a world of innovations, and there are various diagnostics aids that help to take a decision regarding treatment in a well-planned way. Cone beam computed tomography (CBCT) has been a vital tool for imaging diagnostic tool in orthodontics. This article reviews case reports during orthodontic treatment and importance of CBCT during the treatment evaluation. PMID:26225116

Implementation of combined SVM-algorithm and computer-aided perception feedback for pulmonary nodule detection

NASA Astrophysics Data System (ADS)

Pietrzyk, Mariusz W.; Rannou, Didier; Brennan, Patrick C.

2012-02-01

This pilot study examines the effect of a novel decision support system in medical image interpretation. This system is based on combining image spatial frequency properties and eye-tracking data in order to recognize over and under calling errors. Thus, before it can be implemented as a detection aided schema, training is required during which SVMbased algorithm learns to recognize FP from all reported outcomes, and, FN from all unreported prolonged dwelled regions. Eight radiologists inspected 50 PA chest radiographs with the specific task of identifying lung nodules. Twentyfive cases contained CT proven subtle malignant lesions (5-20mm), but prevalence was not known by the subjects, who took part in two sequential reading sessions, the second, without and with support system feedback. MCMR ROC DBM and JAFROC analyses were conducted and demonstrated significantly higher scores following feedback with p values of 0.04, and 0.03 respectively, highlighting significant improvements in radiology performance once feedback was used. This positive effect on radiologists' performance might have important implications for future CAD-system development.

Practical Guide for the Selection of Audio Visual Media. General Criteria System and Evaluation Procedure for Educational Media Decisions.

ERIC Educational Resources Information Center

Klepzig, H. J.; Weiss, M.

Designed to aid in making concrete decisions on the acquisition and use of media, the criteria system and evaluation procedure described is a multiphase, objective-based decision making process. This report includes guidelines for setting up goal systems and developing criteria for the evaluation of media based on a goal system; an outline of…

Developing an Android-Based Patient Decision Aid Based on Ottawa Standards for Patients After Kidney Transplant and Its Usability Evaluation.

PubMed

Zare Moayedi, Mahboobeh; Aslani, Azam; Fakhrahmad, Mostafa; Ezzatzadegan J, Shahrokh

2018-01-01

This study was conducted to develop an android based patient decision aid (PDA) as a self-care instrument for patients after kidney transplant and its usability evaluation. In this study, the systematic development process of Android-based self-care application for patients after kidney transplant based on Ottawa standard was included: scoping, assemble steering group, analysis of requirements, designing, develop of a prototype and system evaluation. The PDA is a self-triage system that will help early identification of risk symptoms in patients, and help manage them. System recommendations for risk signs are: Refer to the nearest hospital or healthcare center without delay, refer to the doctor and tell your doctor in the next visit. To identify patient care needs, a semi-structured interview with members of steering group, including patients and clinical experts, was conducted by the researchers. A prototype of the decision aid was made according to identified needs in the previous step. Finally, in order to evaluate its usability rate by using the System Usability Scale (SUS) questionnaire, it was used by exerts and patients. This study identified information needs, risk signs and steps that patients need to make appropriate decisions about them. The main capabilities of the decision aid are features such as reminders for appointment/test, time of taking medication, registration of symptoms, weight, blood pressure, body temperature, advising to patient in case of signs of risk, weight, blood pressure, body temperature and test results which were reported in the diagram. The mean score of system's usability evaluated by medical informatics specialists, clinicians, and patients were 88.33, 95, and 91. PDAs was usable and desirable from the point of view of medical informatics specialists, clinicians and patients.

Computer-aided Prognosis of Neuroblastoma on Whole-slide Images: Classification of Stromal Development

PubMed Central

Sertel, O.; Kong, J.; Shimada, H.; Catalyurek, U.V.; Saltz, J.H.; Gurcan, M.N.

2009-01-01

We are developing a computer-aided prognosis system for neuroblastoma (NB), a cancer of the nervous system and one of the most malignant tumors affecting children. Histopathological examination is an important stage for further treatment planning in routine clinical diagnosis of NB. According to the International Neuroblastoma Pathology Classification (the Shimada system), NB patients are classified into favorable and unfavorable histology based on the tissue morphology. In this study, we propose an image analysis system that operates on digitized H&E stained whole-slide NB tissue samples and classifies each slide as either stroma-rich or stroma-poor based on the degree of Schwannian stromal development. Our statistical framework performs the classification based on texture features extracted using co-occurrence statistics and local binary patterns. Due to the high resolution of digitized whole-slide images, we propose a multi-resolution approach that mimics the evaluation of a pathologist such that the image analysis starts from the lowest resolution and switches to higher resolutions when necessary. We employ an offine feature selection step, which determines the most discriminative features at each resolution level during the training step. A modified k-nearest neighbor classifier is used to determine the confidence level of the classification to make the decision at a particular resolution level. The proposed approach was independently tested on 43 whole-slide samples and provided an overall classification accuracy of 88.4%. PMID:20161324

A Multimodal Search Engine for Medical Imaging Studies.

PubMed

Pinho, Eduardo; Godinho, Tiago; Valente, Frederico; Costa, Carlos

2017-02-01

The use of digital medical imaging systems in healthcare institutions has increased significantly, and the large amounts of data in these systems have led to the conception of powerful support tools: recent studies on content-based image retrieval (CBIR) and multimodal information retrieval in the field hold great potential in decision support, as well as for addressing multiple challenges in healthcare systems, such as computer-aided diagnosis (CAD). However, the subject is still under heavy research, and very few solutions have become part of Picture Archiving and Communication Systems (PACS) in hospitals and clinics. This paper proposes an extensible platform for multimodal medical image retrieval, integrated in an open-source PACS software with profile-based CBIR capabilities. In this article, we detail a technical approach to the problem by describing its main architecture and each sub-component, as well as the available web interfaces and the multimodal query techniques applied. Finally, we assess our implementation of the engine with computational performance benchmarks.

Decision Support System for Disability Assessment and Intervention.

ERIC Educational Resources Information Center

Dowler, Denetta L.; And Others

1991-01-01

Constructed decision support system to aid referral of good candidates for rehabilitation from Social Security Administration to rehabilitation counselors. Three layers of system were gross screening based on policy guidelines, training materials, and interviews with experts; physical and mental functional capacity items derived from policy…

Expert Systems, Job Aids, and the Future of Instructional Technology; and Decision Tables, the Poor Person's Answer to "Expert Systems."

ERIC Educational Resources Information Center

Harmon, Paul; Pipe, Peter

1986-01-01

Describes design and presents examples of industrial use of small expert systems and guidelines for choosing problems which lend themselves to small tool solutions. Use of microcomputer facilitated decision tables to diagnose and categorize people, things, and issues is suggested, and development of three decision table formats is described. (MBR)

A Multidisciplinary Research Team Approach to Computer-Aided Drafting (CAD) System Selection. Final Report.

ERIC Educational Resources Information Center

Franken, Ken; And Others

A multidisciplinary research team was assembled to review existing computer-aided drafting (CAD) systems for the purpose of enabling staff in the Design Drafting Department at Linn Technical College (Missouri) to select the best system out of the many CAD systems in existence. During the initial stage of the evaluation project, researchers…

Proceedings of the Workshop on Computational Aspects in the Control of Flexible Systems, part 1

NASA Technical Reports Server (NTRS)

Taylor, Lawrence W., Jr. (Compiler)

1989-01-01

Control/Structures Integration program software needs, computer aided control engineering for flexible spacecraft, computer aided design, computational efficiency and capability, modeling and parameter estimation, and control synthesis and optimization software for flexible structures and robots are among the topics discussed.

Computer-aided design/computer-aided manufacturing skull base drill.

PubMed

Couldwell, William T; MacDonald, Joel D; Thomas, Charles L; Hansen, Bradley C; Lapalikar, Aniruddha; Thakkar, Bharat; Balaji, Alagar K

2017-05-01

The authors have developed a simple device for computer-aided design/computer-aided manufacturing (CAD-CAM) that uses an image-guided system to define a cutting tool path that is shared with a surgical machining system for drilling bone. Information from 2D images (obtained via CT and MRI) is transmitted to a processor that produces a 3D image. The processor generates code defining an optimized cutting tool path, which is sent to a surgical machining system that can drill the desired portion of bone. This tool has applications for bone removal in both cranial and spine neurosurgical approaches. Such applications have the potential to reduce surgical time and associated complications such as infection or blood loss. The device enables rapid removal of bone within 1 mm of vital structures. The validity of such a machining tool is exemplified in the rapid (< 3 minutes machining time) and accurate removal of bone for transtemporal (for example, translabyrinthine) approaches.

Exploring differences in the use of the statin choice decision aid and diabetes medication choice decision aid in primary care.

PubMed

Ballard, Aimee Yu; Kessler, Maya; Scheitel, Marianne; Montori, Victor M; Chaudhry, Rajeev

2017-08-10

Shared decision making is essential to patient centered care, but can be difficult for busy clinicians to implement into practice. Tools have been developed to aid in shared decision making and embedded in electronic medical records (EMRs) to facilitate use. This study was undertaken to explore the patterns of use and barriers and facilitators to use of two decision aids, the Statin Choice Decision Aid (SCDA) and the Diabetes Medication Choice Decision Aid (DMCDA), in primary care practices where the decision aids are embedded in the EMR. A survey exploring factors that influenced use of each decision aid was sent to eligible primary care clinicians affiliated with the Mayo Clinic in Rochester, MN. Survey data was collected and clinician use of each decision aid via links from the EMR was tracked. The survey response rate was 40% (105/262). Log file data indicated 51% of clinicians used the SCDA and 9% of clinicians used the DMCDA. Reasons for lack of use included lack of knowledge of the EMR link, not finding the decision aids helpful, and time constraints. Survey responses indicated that use of the tool as intended was low, with many clinicians only discussing decision aid topics that they found relevant. Although guidelines for both the treatment of blood cholesterol with a statin and for the treatment of hyperglycemia in type 2 diabetes recommend shared decision making, tools that facilitate shared decision making are not routinely used even when embedded in the EMR. Even when decision aids are used, their use may not reflect patient centered care.

Technical challenges, past and future, in implementing THERESA: a one million patient, one billion item computer-based patient record and decision support system

NASA Astrophysics Data System (ADS)

Camp, Henry N.

1996-02-01

Challenges in implementing a computer-based patient record (CPR)--such as absolute data integrity, high availability, permanent on-line storage of very large complex records, rapid search times, ease of use, commercial viability, and portability to other hospitals and doctor's offices--are given along with their significance, the solutions, and their successes. The THERESA CPR has been used sine 1983 in direct patient care by a public hospital that is the primary care provider to 350,000 people. It has 1000 beds with 45,000 admissions and 750,000 outpatient visits annually. The system supports direct provider entry, including by physicians, of complete medical `documents'. Its demonstration site currently contains 1.1 billion data items on 1 million patients. It is also a clinical decision-aiding tool used for quality assurance and cost containment, for teaching as faculty and students can easily find and `thumb through' all cases similar to a particular study, and for research with over a billion medical items that can be searched and analyzed on-line within context and with continuity. The same software can also run in a desktop microcomputer managing a private practice physician's office.

Performance of fusion algorithms for computer-aided detection and classification of mines in very shallow water obtained from testing in navy Fleet Battle Exercise-Hotel 2000

NASA Astrophysics Data System (ADS)

Ciany, Charles M.; Zurawski, William; Kerfoot, Ian

2001-10-01

The performance of Computer Aided Detection/Computer Aided Classification (CAD/CAC) Fusion algorithms on side-scan sonar images was evaluated using data taken at the Navy's's Fleet Battle Exercise-Hotel held in Panama City, Florida, in August 2000. A 2-of-3 binary fusion algorithm is shown to provide robust performance. The algorithm accepts the classification decisions and associated contact locations form three different CAD/CAC algorithms, clusters the contacts based on Euclidian distance, and then declares a valid target when a clustered contact is declared by at least 2 of the 3 individual algorithms. This simple binary fusion provided a 96 percent probability of correct classification at a false alarm rate of 0.14 false alarms per image per side. The performance represented a 3.8:1 reduction in false alarms over the best performing single CAD/CAC algorithm, with no loss in probability of correct classification.

Unit cell-based computer-aided manufacturing system for tissue engineering.

PubMed

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-03-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

A Three-Phase Decision Model of Computer-Aided Coding for the Iranian Classification of Health Interventions (IRCHI).

PubMed

Azadmanjir, Zahra; Safdari, Reza; Ghazisaeedi, Marjan; Mokhtaran, Mehrshad; Kameli, Mohammad Esmail

2017-06-01

Accurate coded data in the healthcare are critical. Computer-Assisted Coding (CAC) is an effective tool to improve clinical coding in particular when a new classification will be developed and implemented. But determine the appropriate method for development need to consider the specifications of existing CAC systems, requirements for each type, our infrastructure and also, the classification scheme. The aim of the study was the development of a decision model for determining accurate code of each medical intervention in Iranian Classification of Health Interventions (IRCHI) that can be implemented as a suitable CAC system. first, a sample of existing CAC systems was reviewed. Then feasibility of each one of CAC types was examined with regard to their prerequisites for their implementation. The next step, proper model was proposed according to the structure of the classification scheme and was implemented as an interactive system. There is a significant relationship between the level of assistance of a CAC system and integration of it with electronic medical documents. Implementation of fully automated CAC systems is impossible due to immature development of electronic medical record and problems in using language for medical documenting. So, a model was proposed to develop semi-automated CAC system based on hierarchical relationships between entities in the classification scheme and also the logic of decision making to specify the characters of code step by step through a web-based interactive user interface for CAC. It was composed of three phases to select Target, Action and Means respectively for an intervention. The proposed model was suitable the current status of clinical documentation and coding in Iran and also, the structure of new classification scheme. Our results show it was practical. However, the model needs to be evaluated in the next stage of the research.

The application of simulation modeling to the cost and performance ranking of solar thermal power plants

NASA Technical Reports Server (NTRS)

Rosenberg, L. S.; Revere, W. R.; Selcuk, M. K.

1981-01-01

Small solar thermal power systems (up to 10 MWe in size) were tested. The solar thermal power plant ranking study was performed to aid in experiment activity and support decisions for the selection of the most appropriate technological approach. The cost and performance were determined for insolation conditions by utilizing the Solar Energy Simulation computer code (SESII). This model optimizes the size of the collector field and energy storage subsystem for given engine generator and energy transport characteristics. The development of the simulation tool, its operation, and the results achieved from the analysis are discussed.

The TI-99/4A Software.

ERIC Educational Resources Information Center

Wrege, Rachael; And Others

1982-01-01

Describes the software modules produced by Texas Instruments for use with the TI-99/4A home computer. Among the modules described are: Personal Real Estate, Programing Aids, Home Financial Decisions, Music Maker, Weight Control and Nutrition, Early Learning Fun, and Tax/Investment Record Keeping. (JL)

Acquisition and production of skilled behavior in dynamic decision-making tasks

NASA Technical Reports Server (NTRS)

Kirlik, Alex

1993-01-01

Summaries of the four projects completed during the performance of this research are included. The four projects described are: Perceptual Augmentation Aiding for Situation Assessment, Perceptual Augmentation Aiding for Dynamic Decision-Making and Control, Action Advisory Aiding for Dynamic Decision-Making and Control, and Display Design to Support Time-Constrained Route Optimization. Papers based on each of these projects are currently in preparation. The theoretical framework upon which the first three projects are based, Ecological Task Analysis, was also developed during the performance of this research, and is described in a previous report. A project concerned with modeling strategies in human control of a dynamic system was also completed during the performance of this research.

Collaborative Brain-Computer Interface for Aiding Decision-Making

PubMed Central

Poli, Riccardo; Valeriani, Davide; Cinel, Caterina

2014-01-01

We look at the possibility of integrating the percepts from multiple non-communicating observers as a means of achieving better joint perception and better group decisions. Our approach involves the combination of a brain-computer interface with human behavioural responses. To test ideas in controlled conditions, we asked observers to perform a simple matching task involving the rapid sequential presentation of pairs of visual patterns and the subsequent decision as whether the two patterns in a pair were the same or different. We recorded the response times of observers as well as a neural feature which predicts incorrect decisions and, thus, indirectly indicates the confidence of the decisions made by the observers. We then built a composite neuro-behavioural feature which optimally combines the two measures. For group decisions, we uses a majority rule and three rules which weigh the decisions of each observer based on response times and our neural and neuro-behavioural features. Results indicate that the integration of behavioural responses and neural features can significantly improve accuracy when compared with the majority rule. An analysis of event-related potentials indicates that substantial differences are present in the proximity of the response for correct and incorrect trials, further corroborating the idea of using hybrids of brain-computer interfaces and traditional strategies for improving decision making. PMID:25072739

Cognitive engineering models in space systems

NASA Technical Reports Server (NTRS)

Mitchell, Christine M.

1992-01-01

NASA space systems, including mission operations on the ground and in space, are complex, dynamic, predominantly automated systems in which the human operator is a supervisory controller. The human operator monitors and fine-tunes computer-based control systems and is responsible for ensuring safe and efficient system operation. In such systems, the potential consequences of human mistakes and errors may be very large, and low probability of such events is likely. Thus, models of cognitive functions in complex systems are needed to describe human performance and form the theoretical basis of operator workstation design, including displays, controls, and decision support aids. The operator function model represents normative operator behavior-expected operator activities given current system state. The extension of the theoretical structure of the operator function model and its application to NASA Johnson mission operations and space station applications is discussed.

Economic evaluation of the DiAMOND randomized trial: cost and outcomes of 2 decision aids for mode of delivery among women with a previous cesarean section.

PubMed

Hollinghurst, Sandra; Emmett, Clare; Peters, Tim J; Watson, Helen; Fahey, Tom; Murphy, Deirdre J; Montgomery, Alan

2010-01-01

Maternal preferences should be considered in decisions about mode of delivery following a previous cesarean, but risks and benefits are unclear. Decision aids can help decision making, although few studies have assessed costs in conjunction with effectiveness. Economic evaluation of 2 decision aids for women with 1 previous cesarean. Cost-consequences analysis. Data sources were self-reported resource use and outcome and published national unit costs. The target population was women with 1 previous cesarean. The time horizon was 37 weeks' gestation and 6 weeks postnatal. The perspective was health care delivery system. The interventions were usual care, usual care plus an information program, and usual care plus a decision analysis program. The outcome measures were costs to the National Health Service (NHS) in the United Kingdom (UK), score on the Decisional Conflict Scale, and mode of delivery. RESULTS OF MAIN ANALYSIS: Cost of delivery represented 84% of the total cost; mode of delivery was the most important determinant of cost differences across the groups. Mean (SD) total cost per mother and baby: 2033 (677) for usual care, 2069 (738) for information program, and 2019 (741) for decision analysis program. Decision aids reduced decisional conflict. Women using the decision analysis program had fewest cesarean deliveries. Applying a cost premium to emergency cesareans over electives had little effect on group comparisons. Conclusions were unaffected. Disparity in timing of outcomes and costs, data completeness, and quality. Decision aids can reduce decisional conflict in women with a previous cesarean section when deciding on mode of delivery. The information program could be implemented at no extra cost to the NHS. The decision analysis program might reduce the rate of cesarean sections without any increase in costs.

The NASA computer aided design and test system

NASA Technical Reports Server (NTRS)

Gould, J. M.; Juergensen, K.

1973-01-01

A family of computer programs facilitating the design, layout, evaluation, and testing of digital electronic circuitry is described. CADAT (computer aided design and test system) is intended for use by NASA and its contractors and is aimed predominantly at providing cost effective microelectronic subsystems based on custom designed metal oxide semiconductor (MOS) large scale integrated circuits (LSIC's). CADAT software can be easily adopted by installations with a wide variety of computer hardware configurations. Its structure permits ease of update to more powerful component programs and to newly emerging LSIC technologies. The components of the CADAT system are described stressing the interaction of programs rather than detail of coding or algorithms. The CADAT system provides computer aids to derive and document the design intent, includes powerful automatic layout software, permits detailed geometry checks and performance simulation based on mask data, and furnishes test pattern sequences for hardware testing.

System integration of pattern recognition, adaptive aided, upper limb prostheses

NASA Technical Reports Server (NTRS)

Lyman, J.; Freedy, A.; Solomonow, M.

1975-01-01

The requirements for successful integration of a computer aided control system for multi degree of freedom artificial arms are discussed. Specifications are established for a system which shares control between a human amputee and an automatic control subsystem. The approach integrates the following subsystems: (1) myoelectric pattern recognition, (2) adaptive computer aiding; (3) local reflex control; (4) prosthetic sensory feedback; and (5) externally energized arm with the functions of prehension, wrist rotation, elbow extension and flexion and humeral rotation.

Use of graphics in decision aids for telerobotic control: (Parts 5-8 of an 8-part MIT progress report)

NASA Technical Reports Server (NTRS)

Sheridan, Thomas B.; Roseborough, James B.; Das, Hari; Chin, Kan-Ping; Inoue, Seiichi

1989-01-01

Four separate projects recently completed or in progress at the MIT Man-Machine Systems Laboratory are summarized. They are: a decision aid for retrieving a tumbling satellite in space; kinematic control and graphic display of redundant teleoperators; real time terrain/object generation: a quad-tree approach; and two dimensional control for three dimensional obstacle avoidance.

Modeling and Analysis of Power Processing Systems (MAPPS). Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Lee, F. C.; Rahman, S.; Carter, R. A.; Wu, C. H.; Yu, Y.; Chang, R.

1980-01-01

Computer aided design and analysis techniques were applied to power processing equipment. Topics covered include: (1) discrete time domain analysis of switching regulators for performance analysis; (2) design optimization of power converters using augmented Lagrangian penalty function technique; (3) investigation of current-injected multiloop controlled switching regulators; and (4) application of optimization for Navy VSTOL energy power system. The generation of the mathematical models and the development and application of computer aided design techniques to solve the different mathematical models are discussed. Recommendations are made for future work that would enhance the application of the computer aided design techniques for power processing systems.

Too Soon to Give Up? Re-examining the Value of Advance Directives

PubMed Central

Levi, Benjamin H.; Green, Michael J.

2013-01-01

In the face of mounting criticism against advance directives, we describe how a novel, computer-based decision aid addresses some of these important concerns. This decision aid, Making Your Wishes Known: Planning Your Medical Future, translates an individual’s values and goals into a meaningful advance directive that explicitly reflects their healthcare wishes and outlines a plan for how they wish to be treated. It does this by 1) educating users about advance care planning; 2) helping individuals identify, clarify, and prioritize factors that influence their decision-making about future medical conditions; 3) explaining common end-of-life medical conditions and life-sustaining treatment; 4) helping users articulate a coherent set of wishes with regard to advance care planning—in the form of an advance directive readily interpretable by physicians; and 5) helping individuals both choose a spokesperson, and prepare to engage family, friends, and healthcare providers in discussions about advance care planning. PMID:20379910

Anniversary Paper: History and status of CAD and quantitative image analysis: The role of Medical Physics and AAPM

PubMed Central

Giger, Maryellen L.; Chan, Heang-Ping; Boone, John

2008-01-01

The roles of physicists in medical imaging have expanded over the years, from the study of imaging systems (sources and detectors) and dose to the assessment of image quality and perception, the development of image processing techniques, and the development of image analysis methods to assist in detection and diagnosis. The latter is a natural extension of medical physicists’ goals in developing imaging techniques to help physicians acquire diagnostic information and improve clinical decisions. Studies indicate that radiologists do not detect all abnormalities on images that are visible on retrospective review, and they do not always correctly characterize abnormalities that are found. Since the 1950s, the potential use of computers had been considered for analysis of radiographic abnormalities. In the mid-1980s, however, medical physicists and radiologists began major research efforts for computer-aided detection or computer-aided diagnosis (CAD), that is, using the computer output as an aid to radiologists—as opposed to a completely automatic computer interpretation—focusing initially on methods for the detection of lesions on chest radiographs and mammograms. Since then, extensive investigations of computerized image analysis for detection or diagnosis of abnormalities in a variety of 2D and 3D medical images have been conducted. The growth of CAD over the past 20 years has been tremendous—from the early days of time-consuming film digitization and CPU-intensive computations on a limited number of cases to its current status in which developed CAD approaches are evaluated rigorously on large clinically relevant databases. CAD research by medical physicists includes many aspects—collecting relevant normal and pathological cases; developing computer algorithms appropriate for the medical interpretation task including those for segmentation, feature extraction, and classifier design; developing methodology for assessing CAD performance; validating the algorithms using appropriate cases to measure performance and robustness; conducting observer studies with which to evaluate radiologists in the diagnostic task without and with the use of the computer aid; and ultimately assessing performance with a clinical trial. Medical physicists also have an important role in quantitative imaging, by validating the quantitative integrity of scanners and developing imaging techniques, and image analysis tools that extract quantitative data in a more accurate and automated fashion. As imaging systems become more complex and the need for better quantitative information from images grows, the future includes the combined research efforts from physicists working in CAD with those working on quantitative imaging systems to readily yield information on morphology, function, molecular structure, and more—from animal imaging research to clinical patient care. A historical review of CAD and a discussion of challenges for the future are presented here, along with the extension to quantitative image analysis. PMID:19175137

Anniversary Paper: History and status of CAD and quantitative image analysis: The role of Medical Physics and AAPM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giger, Maryellen L.; Chan, Heang-Ping; Boone, John

2008-12-15

The roles of physicists in medical imaging have expanded over the years, from the study of imaging systems (sources and detectors) and dose to the assessment of image quality and perception, the development of image processing techniques, and the development of image analysis methods to assist in detection and diagnosis. The latter is a natural extension of medical physicists' goals in developing imaging techniques to help physicians acquire diagnostic information and improve clinical decisions. Studies indicate that radiologists do not detect all abnormalities on images that are visible on retrospective review, and they do not always correctly characterize abnormalities thatmore » are found. Since the 1950s, the potential use of computers had been considered for analysis of radiographic abnormalities. In the mid-1980s, however, medical physicists and radiologists began major research efforts for computer-aided detection or computer-aided diagnosis (CAD), that is, using the computer output as an aid to radiologists--as opposed to a completely automatic computer interpretation--focusing initially on methods for the detection of lesions on chest radiographs and mammograms. Since then, extensive investigations of computerized image analysis for detection or diagnosis of abnormalities in a variety of 2D and 3D medical images have been conducted. The growth of CAD over the past 20 years has been tremendous--from the early days of time-consuming film digitization and CPU-intensive computations on a limited number of cases to its current status in which developed CAD approaches are evaluated rigorously on large clinically relevant databases. CAD research by medical physicists includes many aspects--collecting relevant normal and pathological cases; developing computer algorithms appropriate for the medical interpretation task including those for segmentation, feature extraction, and classifier design; developing methodology for assessing CAD performance; validating the algorithms using appropriate cases to measure performance and robustness; conducting observer studies with which to evaluate radiologists in the diagnostic task without and with the use of the computer aid; and ultimately assessing performance with a clinical trial. Medical physicists also have an important role in quantitative imaging, by validating the quantitative integrity of scanners and developing imaging techniques, and image analysis tools that extract quantitative data in a more accurate and automated fashion. As imaging systems become more complex and the need for better quantitative information from images grows, the future includes the combined research efforts from physicists working in CAD with those working on quantitative imaging systems to readily yield information on morphology, function, molecular structure, and more--from animal imaging research to clinical patient care. A historical review of CAD and a discussion of challenges for the future are presented here, along with the extension to quantitative image analysis.« less

The development of a decision aid for tinnitus.

PubMed

Pryce, Helen; Durand, Marie-Anne; Hall, Amanda; Shaw, Rachel; Culhane, Beth-Anne; Swift, Sarah; Straus, Jean; Marks, Elizabeth; Ward, Melanie; Chilvers, Katie

2018-05-09

To develop a decision aid for tinnitus care that would meet international consensus for decision aid quality. A mixed methods design that included qualitative in-depth interviews, literature review, focus groups, user testing and readability checking. Patients and clinicians who have clinical experience of tinnitus. A decision aid for tinnitus care was developed. This incorporates key evidence of efficacy for the most frequently used tinnitus care options, together with information derived from patient priorities when deciding which choice to make. The decision aid has potential to enable shared decision making between clinicians and patients in audiology. The decision aid meets consensus standards.

Contextual Mediators influencing the Effectiveness of Behavioural Change Interventions: A Case of HIV/AIDS Prevention Behaviours

PubMed Central

Musiimenta, Angella

2012-01-01

Background: Although Uganda had recorded declines in HIV infection rates around 1990’s, it is argued that HIV/AIDS risk sexual behaviour, especially among the youth, started increasing again from early 2000. School-based computer-assisted HIV interventions can provide interactive ways of improving the youth’s HIV knowledge, attitudes and skills. However, these interventions have long been reported to have limited success in improving the youth’s sexual behaviours, which is always the major aim of implementing such interventions. This could be because the commonly used health promotion theories employed by these interventions have limited application in HIV prevention. These theories tend to lack sufficient attention to contextual mediators that influence ones sexual behaviours. Moreover, literature increasingly expresses dissatisfaction with the dominant prevailing descriptive survey-type HIV/AIDS-related research. Objective and Methods: The objective of this research was to identify contextual mediators that influence the youth’s decision to adopt and maintain the HIV/AIDS preventive behaviour advocated by a computer-assisted intervention. To achieve this objective, this research employed qualitative method, which provided in-depth understanding of how different contexts interact to influence the effectiveness of HIV/AIDS interventions. The research question was: What contextual mediators are influencing the youth’s decision to adopt and maintain the HIV/AIDS preventive behaviour advocated by a computer-assisted intervention? To answer this research question, 20 youth who had previously completed the WSWM intervention when they were still in secondary schools were telephone interviewed between Sept.08 and Dec.08. The collected data was then analysed, based on grounded theory’s coding scheme. Results: Findings demonstrate that although often ignored by HIV interventionists and researchers, variety of contextual mediators influence individual uptake of HIV preventives. These include relationship characteristics, familial mediators, peer influence, gender-based social norms, economic factors and religious beliefs. Conclusion: To generate concomitant mutual efforts, rather than exclusively focusing on individual level mediators, there is an urgent need to shift to integrative approaches, which combine individual level change strategies with contextual level change approaches in the design and implementation of interventional strategies to fight against HIV/AIDS. PMID:23569636

Three-dimensional surgical simulation.

PubMed

Cevidanes, Lucia H C; Tucker, Scott; Styner, Martin; Kim, Hyungmin; Chapuis, Jonas; Reyes, Mauricio; Proffit, William; Turvey, Timothy; Jaskolka, Michael

2010-09-01

In this article, we discuss the development of methods for computer-aided jaw surgery, which allows us to incorporate the high level of precision necessary for transferring virtual plans into the operating room. We also present a complete computer-aided surgery system developed in close collaboration with surgeons. Surgery planning and simulation include construction of 3-dimensional surface models from cone-beam computed tomography, dynamic cephalometry, semiautomatic mirroring, interactive cutting of bone, and bony segment repositioning. A virtual setup can be used to manufacture positioning splints for intraoperative guidance. The system provides further intraoperative assistance with a computer display showing jaw positions and 3-dimensional positioning guides updated in real time during the surgical procedure. The computer-aided surgery system aids in dealing with complex cases with benefits for the patient, with surgical practice, and for orthodontic finishing. Advanced software tools for diagnosis and treatment planning allow preparation of detailed operative plans, osteotomy repositioning, bone reconstructions, surgical resident training, and assessing the difficulties of the surgical procedures before the surgery. Computer-aided surgery can make the elaboration of the surgical plan a more flexible process, increase the level of detail and accuracy of the plan, yield higher operative precision and control, and enhance documentation of cases. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Digital Solutions for Informed Decision Making: An Academic-Community Partnership for the Development of a Prostate Cancer Decision Aid for African American Men.

PubMed

Owens, Otis L; Friedman, Daniela B; Brandt, Heather M; Bernhardt, Jay M; Hébert, James R

2016-05-01

African American (AA) men are significantly more likely to die of prostate cancer (PrCA) than other racial groups, and there is a critical need to identify strategies for providing information about PrCA screening and the importance of informed decision making (IDM). To assess whether a computer-based IDM intervention for PrCA screening would be appropriate for AA men, this formative evaluation study examined their (1) PrCA risk and screening knowledge; (2) decision-making processes for PrCA screening; (3) usage of, attitudes toward, and access to interactive communication technologies (ICTs); and (4) perceptions regarding a future, novel, computer-based PrCA education intervention. A purposive convenience sample of 39 AA men aged 37 to 66 years in the Southeastern United States was recruited through faith-based organizations to participate in one of six 90-minute focus groups and complete a 45-item descriptive survey. Participants were generally knowledgeable about PrCA. However, few engaged in IDM with their doctor and few were informed about the associated risks and uncertainties of PrCA screening. Most participants used ICTs on a daily basis for various purposes including health information seeking. Most participants were open to a novel, computer-based intervention if the system was easy to use and its animated avatars were culturally appropriate. Because study participants had low exposure to IDM for PrCA, but frequently used ICTs, IDM interventions using ICTs (e.g., computers) hold promise for AA men and should be explored for feasibility and effectiveness. These interventions should aim to increase PrCA screening knowledge and stress the importance of participating in IDM with doctors. © The Author(s) 2015.

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

PubMed

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

Concise evaluation of decision aids.

PubMed

Stalmeier, Peep F M; Roosmalen, Marielle S

2009-01-01

Decision aids purport to help patients make treatment related choices. Several instruments exist to evaluate decision aids. Our aim is to compare the responsiveness of several instruments. Two different decision aids were randomized in patients at high risk for breast and ovarian cancer. Treatment choices were between prophylactic surgery and screening. Effect sizes were calculated to compare the responsiveness of the measures. One decision aid was randomized in 390 women, the other in 91 ensuing mutation carriers. Three factors were identified related to Information, Well-being and Decision Making. Within each factor, single item measures were as responsive as multi-item measures. Four single items, 'the amount of information received for decision making,' 'strength of preference,' 'I weighed the pros and cons,' and 'General Health,' were adequately responsive to the decision aids. These items might be considered for inclusion in questionnaires to evaluate decision aids.

SAMO (Sistema de Apoyo Mechanizado a la Operacion): An operational aids computer system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stormer, T.D.; Laflor, E.V.

1989-01-01

SAMO (Sistema de Apoyo Mechanizado a la Operacion) is a sensor-driven, computer-based, graphic display system designed by Westinghouse to aid the A. N. Asco operations staff during all modes of plant operations, including emergencies. The SAMO system is being implemented in the A. N. Asco plant in two phases that coincide with consecutive refueling outages for each of two nuclear units at the Asco site. Phase 1 of the SAMO system implements the following functions: (1) emergency operational aids, (2) postaccident monitoring, (3) plant graphics display, (4) high-speed transient analysis recording, (5) historical data collection, storage, and retrieval, (6) sequencemore » of events, and (7) posttrip review. During phase 2 of the SAMO project, the current plant computer will be removed and the functions now performed by the plant computer will be performed by the SAMO system. In addition, the following functions will be implemented: (1) normal and simple transients operational aid, (2) plant information graphics; and (3) real-time radiological off-site dose calculation.« less

A Metric for Reducing False Positives in the Computer-Aided Detection of Breast Cancer from Dynamic Contrast-Enhanced Magnetic Resonance Imaging Based Screening Examinations of High-Risk Women.

PubMed

Levman, Jacob E D; Gallego-Ortiz, Cristina; Warner, Ellen; Causer, Petrina; Martel, Anne L

2016-02-01

Magnetic resonance imaging (MRI)-enabled cancer screening has been shown to be a highly sensitive method for the early detection of breast cancer. Computer-aided detection systems have the potential to improve the screening process by standardizing radiologists to a high level of diagnostic accuracy. This retrospective study was approved by the institutional review board of Sunnybrook Health Sciences Centre. This study compares the performance of a proposed method for computer-aided detection (based on the second-order spatial derivative of the relative signal intensity) with the signal enhancement ratio (SER) on MRI-based breast screening examinations. Comparison is performed using receiver operating characteristic (ROC) curve analysis as well as free-response receiver operating characteristic (FROC) curve analysis. A modified computer-aided detection system combining the proposed approach with the SER method is also presented. The proposed method provides improvements in the rates of false positive markings over the SER method in the detection of breast cancer (as assessed by FROC analysis). The modified computer-aided detection system that incorporates both the proposed method and the SER method yields ROC results equal to that produced by SER while simultaneously providing improvements over the SER method in terms of false positives per noncancerous exam. The proposed method for identifying malignancies outperforms the SER method in terms of false positives on a challenging dataset containing many small lesions and may play a useful role in breast cancer screening by MRI as part of a computer-aided detection system.

"Aid to Thought"--Just Simulate It!

ERIC Educational Resources Information Center

Kinczkowski, Linda; Cardon, Phillip; Speelman, Pamela

2015-01-01

This paper provides examples of Aid-to-Thought uses in urban decision making, classroom laboratory planning, and in a ship antiaircraft defense system. Aid-to-Thought modeling and simulations are tools students can use effectively in a STEM classroom while meeting Standards for Technological Literacy Benchmarks O and R. These projects prepare…

Persons with Alzheimer's Disease Make Phone Calls Independently Using a Computer-Aided Telephone System

ERIC Educational Resources Information Center

Perilli, Viviana; Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Cordiano, Noemi; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

2012-01-01

This study assessed whether four patients with a diagnosis of Alzheimer's disease could make independent phone calls via a computer-aided telephone system. The study was carried out according to a non-concurrent multiple baseline design across participants. All participants started with baseline during which the telephone system was not available,…

Design, Development, Implementation, and Evaluation of the Computer Aided Interactive Testing System (CAITS). Focus on the Trained Person.

ERIC Educational Resources Information Center

1983

This report describes the design, development, implementation, and evaluation of the Computer Aided Interactive Testing System (CAITS) and addresses the applicability of the system in the Naval Education and Training Command. In addition to an introduction (section one), the report contains four sections and three appendices. Section two describes…

Functional Specifications for Computer Aided Training Systems Development and Management (CATSDM) Support Functions. Final Report.

ERIC Educational Resources Information Center

Hughes, John; And Others

This report provides a description of a Computer Aided Training System Development and Management (CATSDM) environment based on state-of-the-art hardware and software technology, and including recommendations for off the shelf systems to be utilized as a starting point in addressing the particular systematic training and instruction design and…

A Complete Interactive Graphical Computer-Aided Instruction System.

ERIC Educational Resources Information Center

Abrams, Steven Selby

The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

Computerizing Your Program.

ERIC Educational Resources Information Center

Curtis, Rick

This paper summarizes information about using computer hardware and software to aid in making purchase decisions that are based on user needs. The two major options in hardware are IBM-compatible machines and the Apple Macintosh line. The three basic software applications include word processing, database management, and spreadsheet applications.…

Comparing the effect of a decision aid plus patient navigation with usual care on colorectal cancer screening completion in vulnerable populations: study protocol for a randomized controlled trial

PubMed Central

2014-01-01

Background Screening can reduce colorectal cancer (CRC) incidence and mortality. However, screening is underutilized in vulnerable patient populations, particularly among Latinos. Patient-directed decision aids can increase CRC screening knowledge, self-efficacy, and intent; however, their effect on actual screening test completion tends to be modest. This is probably because decision aids do not address some of the patient-specific barriers that prevent successful completion of CRC screening in these populations. These individual barriers might be addressed though patient navigation interventions. This study will test a combined decision aid and patient navigator intervention on screening completion in diverse populations of vulnerable primary care patients. Methods/Design We will conduct a multisite, randomized controlled trial with patient-level randomization. Planned enrollment is 300 patients aged 50 to 75 years at average CRC risk presenting for appointments at two primary clinics in North Carolina and New Mexico. Intervention participants will view a video decision aid immediately before the clinic visit. The 14 to 16 minute video presents information about fecal occult blood tests and colonoscopy and will be viewed on a portable computer tablet in English or Spanish. Clinic-based patient navigators are bilingual and bicultural and will provide both face-to-face and telephone-based navigation. Control participants will view an unrelated food safety video and receive usual care. The primary outcome is completion of a CRC screening test at six months. Planned subgroup analyses include examining intervention effectiveness in Latinos, who will be oversampled. Secondarily, the trial will evaluate the intervention effects on knowledge of CRC screening, self-efficacy, intent, and patient-provider communication. The study will also examine whether patient ethnicity, acculturation, language preference, or health insurance status moderate the intervention effect on CRC screening. Discussion This pragmatic randomized controlled trial will test a combined decision aid and patient navigator intervention targeting CRC screening completion. Findings from this trial may inform future interventions and implementation policies designed to promote CRC screening in vulnerable patient populations and to reduce screening disparities. Clinical trial registration ClinicalTrials.gov NCT02054598. PMID:25004983

Comparing the effect of a decision aid plus patient navigation with usual care on colorectal cancer screening completion in vulnerable populations: study protocol for a randomized controlled trial.

PubMed

Brenner, Alison T; Getrich, Christina M; Pignone, Michael; Rhyne, Robert L; Hoffman, Richard M; McWilliams, Andrew; de Hernandez, Brisa Urquieta; Weaver, Mark A; Tapp, Hazel; Harbi, Khalil; Reuland, Daniel

2014-07-08

Screening can reduce colorectal cancer (CRC) incidence and mortality. However, screening is underutilized in vulnerable patient populations, particularly among Latinos. Patient-directed decision aids can increase CRC screening knowledge, self-efficacy, and intent; however, their effect on actual screening test completion tends to be modest. This is probably because decision aids do not address some of the patient-specific barriers that prevent successful completion of CRC screening in these populations. These individual barriers might be addressed though patient navigation interventions. This study will test a combined decision aid and patient navigator intervention on screening completion in diverse populations of vulnerable primary care patients. We will conduct a multisite, randomized controlled trial with patient-level randomization. Planned enrollment is 300 patients aged 50 to 75 years at average CRC risk presenting for appointments at two primary clinics in North Carolina and New Mexico. Intervention participants will view a video decision aid immediately before the clinic visit. The 14 to 16 minute video presents information about fecal occult blood tests and colonoscopy and will be viewed on a portable computer tablet in English or Spanish. Clinic-based patient navigators are bilingual and bicultural and will provide both face-to-face and telephone-based navigation. Control participants will view an unrelated food safety video and receive usual care. The primary outcome is completion of a CRC screening test at six months. Planned subgroup analyses include examining intervention effectiveness in Latinos, who will be oversampled. Secondarily, the trial will evaluate the intervention effects on knowledge of CRC screening, self-efficacy, intent, and patient-provider communication. The study will also examine whether patient ethnicity, acculturation, language preference, or health insurance status moderate the intervention effect on CRC screening. This pragmatic randomized controlled trial will test a combined decision aid and patient navigator intervention targeting CRC screening completion. Findings from this trial may inform future interventions and implementation policies designed to promote CRC screening in vulnerable patient populations and to reduce screening disparities. ClinicalTrials.gov NCT02054598.

Preparing Parents to Make An Informed Choice About Antibiotic Use for Common Acute Respiratory Infections in Children: A Randomised Trial of Brief Decision Aids in a Hypothetical Scenario.

PubMed

Coxeter, Peter D; Del Mar, Chris B; Hoffmann, Tammy C

2017-08-01

Childhood acute respiratory infections (ARIs) are one of the most common reasons for primary care consultations and for receiving an antibiotic. Public awareness of antibiotic benefit and harms for these conditions is low. To facilitate informed decision making, ideally in collaboration with their doctor, parents need clear communication about benefits and harms. Decision aids may be able to facilitate this process. The aim of this study was to evaluate the effectiveness of three decision aids about antibiotic use for common ARIs in children. Adult parents of children aged 1-16 years (n = 120) were recruited from community settings and then randomised using a computer-generated randomisation sequence to receive a decision aid (n = 60) or fact sheet (n = 60). Allocation was concealed and used sealed and opaque sequentially numbered envelopes. Participants self-completed questionnaires at baseline and immediately post-intervention. The primary outcome was informed choice (conceptual and numerical knowledge; attitudes towards, and intention to use, antibiotics for a future ARI). Secondary outcomes were decisional conflict, decisional self-efficacy, and material acceptability. After reading the information, significantly more intervention group participants made an informed choice [57%] compared with control group participants [29%] [difference 28, 95% confidence interval (CI) 11-45%, p < 0.01], and had higher total knowledge [mean difference (MD) 2.8, 95% CI 2.2-3.5, p < 0.01], conceptual knowledge (MD 0.7, 95% CI 0.4-1.1, p < 0.01) and numerical knowledge (MD 2.1, 95% CI 1.6-2.5, p < 0.01). Between-group differences in attitudes or intention to use antibiotics were not significant. Most intervention group participants found the information understandable and liked the aids' format and features. The decision aids prepared parents to make an informed choice about antibiotic use more than fact sheets, in a hypothetical situation. Their effect within a consultation needs to be evaluated. Clinical Trials Registration Number: ACTRN12615000843550.

A framework for development of an intelligent system for design and manufacturing of stamping dies

NASA Astrophysics Data System (ADS)

Hussein, H. M. A.; Kumar, S.

2014-07-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

Are patient decision aids the best way to improve clinical decision making? Report of the IPDAS Symposium.

PubMed

Holmes-Rovner, Margaret; Nelson, Wendy L; Pignone, Michael; Elwyn, Glyn; Rovner, David R; O'Connor, Annette M; Coulter, Angela; Correa-de-Araujo, Rosaly

2007-01-01

This article reports on the International Patient Decision Aid Standards Symposium held in 2006 at the annual meeting of the Society for Medical Decision Making in Cambridge, Massachusetts. The symposium featured a debate regarding the proposition that "decision aids are the best way to improve clinical decision making.'' The formal debate addressed the theoretical problem of the appropriate gold standard for an improved decision, efficacy of decision aids, and prospects for implementation. Audience comments and questions focused on both theory and practice: the often unacknowledged roots of decision aids in expected utility theory and the practical problems of limited patient decision aid implementation in health care. The participants' vote on the proposition was approximately half for and half against.

Decision aids to increase living donor kidney transplantation

PubMed Central

Gander, Jennifer C.; Gordon, Elisa J.; Patzer, Rachel E.

2017-01-01

Purpose of review For the more than 636,000 adults with end-stage renal disease (ESRD) in the U.S., kidney transplantation is the preferred treatment compared to dialysis. Living donor kidney transplantation (LDKT) comprised 31% of kidney transplantations in 2015, an 8% decrease since 2004. We aimed to summarize the current literature on decision aids that could be used to improve LDKT rates. Recent findings Decision aids are evidence-based tools designed to help patients and their families make difficult treatment decisions. LDKT decision aids can help ESRD patients, patients’ family and friends, and healthcare providers engage in treatment decisions and thereby overcome multifactorial LDKT barriers. Summary We identified 12 LDKT decision aids designed to provide information about LDKT, and/or to help ESRD patients identify potential living donors, and/or to help healthcare providers make decisions about treatment for ESRD or living donation. Of these, 4 were shown to be effective in increasing LDKT, donor inquiries, LDKT knowledge, and willingness to discuss LDKT. Although each LDKT decision aid has limitations, adherence to decision aid development guidelines may improve decision aid utilization and access to LDKT. PMID:29034143

Modeling And Simulation Of Bar Code Scanners Using Computer Aided Design Software

NASA Astrophysics Data System (ADS)

Hellekson, Ron; Campbell, Scott

1988-06-01

Many optical systems have demanding requirements to package the system in a small 3 dimensional space. The use of computer graphic tools can be a tremendous aid to the designer in analyzing the optical problems created by smaller and less costly systems. The Spectra Physics grocery store bar code scanner employs an especially complex 3 dimensional scan pattern to read bar code labels. By using a specially written program which interfaces with a computer aided design system, we have simulated many of the functions of this complex optical system. In this paper we will illustrate how a recent version of the scanner has been designed. We will discuss the use of computer graphics in the design process including interactive tweaking of the scan pattern, analysis of collected light, analysis of the scan pattern density, and analysis of the manufacturing tolerances used to build the scanner.

The effect of a decision aid intervention on decision making about coronary heart disease risk reduction: secondary analyses of a randomized trial

PubMed Central

2014-01-01

Background Decision aids offer promise as a practical solution to improve patient decision making about coronary heart disease (CHD) prevention medications and help patients choose medications to which they are likely to adhere. However, little data is available on decision aids designed to promote adherence. Methods In this paper, we report on secondary analyses of a randomized trial of a CHD adherence intervention (second generation decision aid plus tailored messages) versus usual care in an effort to understand how the decision aid facilitates adherence. We focus on data collected from the primary study visit, when intervention participants presented 45 minutes early to a previously scheduled provider visit; viewed the decision aid, indicating their intent for CHD risk reduction after each decision aid component (individualized risk assessment and education, values clarification, and coaching); and filled out a post-decision aid survey assessing their knowledge, perceived risk, decisional conflict, and intent for CHD risk reduction. Control participants did not present early and received usual care from their provider. Following the provider visit, participants in both groups completed post-visit surveys assessing the number and quality of CHD discussions with their provider, their intent for CHD risk reduction, and their feelings about the decision aid. Results We enrolled 160 patients into our study (81 intervention, 79 control). Within the decision aid group, the decision aid significantly increased knowledge of effective CHD prevention strategies (+21 percentage points; adjusted p<.0001) and the accuracy of perceived CHD risk (+33 percentage points; adjusted p<.0001), and significantly decreased decisional conflict (-0.63; adjusted p<.0001). Comparing between study groups, the decision aid also significantly increased CHD prevention discussions with providers (+31 percentage points; adjusted p<.0001) and improved perceptions of some features of patient-provider interactions. Further, it increased participants’ intentions for any effective CHD risk reducing strategies (+21 percentage points; 95% CI 5 to 37 percentage points), with a majority of the effect from the educational component of the decision aid. Ninety-nine percent of participants found the decision aid easy to understand and 93% felt it easy to use. Conclusions Decision aids can play an important role in improving decisions about CHD prevention and increasing patient-provider discussions and intent to reduce CHD risk. PMID:24575882

Computer Aided Drafting. Instructor's Guide.

ERIC Educational Resources Information Center

Henry, Michael A.

This guide is intended for use in introducing students to the operation and applications of computer-aided drafting (CAD) systems. The following topics are covered in the individual lessons: understanding CAD (CAD versus traditional manual drafting and care of software and hardware); using the components of a CAD system (primary and other input…

A pathway to personalization of integrated treatment: informatics and decision science in psychiatric rehabilitation.

PubMed

Spaulding, William; Deogun, Jitender

2011-09-01

Personalization of treatment is a current strategic goal for improving health care. Integrated treatment approaches such as psychiatric rehabilitation benefit from personalization because they involve matching diverse arrays of treatment options to individually unique profiles of need. The need for personalization is evident in the heterogeneity of people with severe mental illness and in the findings of experimental psychopathology. One pathway to personalization lies in analysis of the judgments and decision making of human experts and other participants as they respond to complex circumstances in pursuit of treatment and rehabilitation goals. Such analysis is aided by computer simulation of human decision making, which in turn informs development of computerized clinical decision support systems. This inspires a research program involving concurrent development of databases, domain ontology, and problem-solving algorithms, toward the goal of personalizing psychiatric rehabilitation through human collaboration with intelligent cyber systems. The immediate hurdle is to demonstrate that clinical decisions beyond diagnosis really do affect outcome. This can be done by supporting the hypothesis that a human treatment team with access to a reasonably comprehensive clinical database that tracks patient status and treatment response over time achieves better outcome than a treatment team without such access, in a controlled experimental trial. Provided the hypothesis can be supported, the near future will see prototype systems that can construct an integrated assessment, formulation, and rehabilitation plan from clinical assessment data and contextual information. This will lead to advanced systems that collaborate with human decision makers to personalize psychiatric rehabilitation and optimize outcome.

Comprehensive automatic assessment of retinal vascular abnormalities for computer-assisted retinopathy grading.

PubMed

Joshi, Vinayak; Agurto, Carla; VanNess, Richard; Nemeth, Sheila; Soliz, Peter; Barriga, Simon

2014-01-01

One of the most important signs of systemic disease that presents on the retina is vascular abnormalities such as in hypertensive retinopathy. Manual analysis of fundus images by human readers is qualitative and lacks in accuracy, consistency and repeatability. Present semi-automatic methods for vascular evaluation are reported to increase accuracy and reduce reader variability, but require extensive reader interaction; thus limiting the software-aided efficiency. Automation thus holds a twofold promise. First, decrease variability while increasing accuracy, and second, increasing the efficiency. In this paper we propose fully automated software as a second reader system for comprehensive assessment of retinal vasculature; which aids the readers in the quantitative characterization of vessel abnormalities in fundus images. This system provides the reader with objective measures of vascular morphology such as tortuosity, branching angles, as well as highlights of areas with abnormalities such as artery-venous nicking, copper and silver wiring, and retinal emboli; in order for the reader to make a final screening decision. To test the efficacy of our system, we evaluated the change in performance of a newly certified retinal reader when grading a set of 40 color fundus images with and without the assistance of the software. The results demonstrated an improvement in reader's performance with the software assistance, in terms of accuracy of detection of vessel abnormalities, determination of retinopathy, and reading time. This system enables the reader in making computer-assisted vasculature assessment with high accuracy and consistency, at a reduced reading time.

A computer decision aid for medical prevention: a pilot qualitative study of the Personalized Estimate of Risks (EsPeR) system

PubMed Central

Colombet, Isabelle; Dart, Thierry; Leneveut, Laurence; Zunino, Sylvain; Ménard, Joël; Chatellier, Gilles

2003-01-01

Background Many preventable diseases such as ischemic heart diseases and breast cancer prevail at a large scale in the general population. Computerized decision support systems are one of the solutions for improving the quality of prevention strategies. Methods The system called EsPeR (Personalised Estimate of Risks) combines calculation of several risks with computerisation of guidelines (cardiovascular prevention, screening for breast cancer, colorectal cancer, uterine cervix cancer, and prostate cancer, diagnosis of depression and suicide risk). We present a qualitative evaluation of its ergonomics, as well as it's understanding and acceptance by a group of general practitioners. We organised four focus groups each including 6–11 general practitioners. Physicians worked on several structured clinical scenari os with the help of EsPeR, and three senior investigators leaded structured discussion sessions. Results The initial sessions identified several ergonomic flaws of the system that were easily corrected. Both clinical scenarios and discussion sessions identified several problems related to the insufficient comprehension (expression of risks, definition of familial history of disease), and difficulty for the physicians to accept some of the recommendations. Conclusion Educational, socio-professional and organisational components (i.e. time constraints for training and use of the EsPeR system during consultation) as well as acceptance of evidence-based decision-making should be taken into account before launching computerised decision support systems, or their application in randomised trials. PMID:14641924

Human factors in command and control for the Los Angeles Fire Department.

PubMed

Harper, W R

1974-03-01

Ergonomics owes much of its operations and systems heritage to military research. Since public safety systems such as police, fire departments and civil defence organisations are quasi-military in nature, one may reasonably use the findings from military ergonomics research to extrapolate design data for use in a decision-making system. This article discusses a case study concerning Human Factors in command and control for the Los Angeles Fire Department. The case involved transfer from a manual dispatch system involving three geographic areas of metropolitan Los Angeles to one central computer-aided command and control system. Comments are made on console mock-ups, environmental factors in the Control Centre placement of the consoles. Because of extreme delays in procurement of the recommended hardware it is doubtful that empirical testing of the ergonomics aspect of the system will take place.

Aids to navigation service force mix 2000 project. Volume 2 : development and application of an aids to navigation service force mix decision support system : aid assignments and vessel summary reports

DOT National Transportation Integrated Search

1992-06-01

The Aids to Navigation (ATON) Service Force Mix (SFM) 2000 Project is documented in a Project Overview and three separately bound volumes. This is Volume II. The Project Overview describes the purpose, approach, analysis, and results of the ATON SFM ...

Detection of benign prostatic hyperplasia nodules in T2W MR images using fuzzy decision forest

NASA Astrophysics Data System (ADS)

Lay, Nathan; Freeman, Sabrina; Turkbey, Baris; Summers, Ronald M.

2016-03-01

Prostate cancer is the second leading cause of cancer-related death in men MRI has proven useful for detecting prostate cancer, and CAD may further improve detection. One source of false positives in prostate computer-aided diagnosis (CAD) is the presence of benign prostatic hyperplasia (BPH) nodules. These nodules have a distinct appearance with a pseudo-capsule on T2 weighted MR images but can also resemble cancerous lesions in other sequences such as the ADC or high B-value images. Describing their appearance with hand-crafted heuristics (features) that also exclude the appearance of cancerous lesions is challenging. This work develops a method based on fuzzy decision forests to automatically learn discriminative features for the purpose of BPH nodule detection in T2 weighted images for the purpose of improving prostate CAD systems.

Averting Denver Airports on a Chip

NASA Technical Reports Server (NTRS)

Sullivan, Kevin J.

1995-01-01

As a result of recent advances in software engineering capabilities, we are now in a more stable environment. De-facto hardware and software standards are emerging. Work on software architecture and design patterns signals a consensus on the importance of early system-level design decisions, and agreements on the uses of certain paradigmatic software structures. We now routinely build systems that would have been risky or infeasible a few years ago. Unfortunately, technological developments threaten to destabilize software design again. Systems designed around novel computing and peripheral devices will spark ambitious new projects that will stress current software design and engineering capabilities. Micro-electro-mechanical systems (MEMS) and related technologies provide the physical basis for new systems with the potential to produce this kind of destabilizing effect. One important response to anticipated software engineering and design difficulties is carefully directed engineering-scientific research. Two specific problems meriting substantial research attention are: A lack of sufficient means to build software systems by generating, extending, specializing, and integrating large-scale reusable components; and a lack of adequate computational and analytic tools to extend and aid engineers in maintaining intellectual control over complex software designs.

Accuracy evaluation of metal copings fabricated by computer-aided milling and direct metal laser sintering systems

PubMed Central

Lee, Wan-Sun; Kim, Woong-Chul

2015-01-01

PURPOSE To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (α=.05), respectively. RESULTS The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (<120 µm). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced. PMID:25932310

Accuracy evaluation of metal copings fabricated by computer-aided milling and direct metal laser sintering systems.

PubMed

Park, Jong-Kyoung; Lee, Wan-Sun; Kim, Hae-Young; Kim, Woong-Chul; Kim, Ji-Hwan

2015-04-01

To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (α=.05), respectively. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (<120 µm). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

A little anthropomorphism goes a long way: Effects of oxytocin on trust, compliance and team performance with automated agents

PubMed Central

de Visser, Ewart J.; Monfort, Samuel S.; Goodyear, Kimberly; Lu, Li; O’Hara, Martin; Lee, Mary R.; Parasuraman, Raja; Krueger, Frank

2017-01-01

Objective We investigated the effects of exogenous oxytocin on trust, compliance, and team decision making with agents varying in anthropomorphism (computer, avatar, human) and reliability (100%, 50%). Background Recent work has explored psychological similarities in how we trust human-like automation compared to how we trust other humans. Exogenous administration of oxytocin, a neuropeptide associated with trust among humans, offers a unique opportunity to probe the anthropomorphism continuum of automation to infer when agents are trusted like another human or merely a machine. Method Eighty-four healthy male participants collaborated with automated agents varying in anthropomorphism that provided recommendations in a pattern recognition task. Results Under placebo, participants exhibited less trust and compliance with automated aids as the anthropomorphism of those aids increased. Under oxytocin, participants interacted with aids on the extremes of the anthropomorphism continuum similarly to placebos, but increased their trust, compliance, and performance with the avatar, an agent on the midpoint of the anthropomorphism continuum. Conclusion This study provided the first evidence that administration of exogenous oxytocin affected trust, compliance, and team decision making with automated agents. These effects provide support for the premise that oxytocin increases affinity for social stimuli in automated aids. Application Designing automation to mimic basic human characteristics is sufficient to elicit behavioral trust outcomes that are driven by neurological processes typically observed in human-human interactions. Designers of automated systems should consider the task, the individual, and the level of anthropomorphism to achieve the desired outcome. PMID:28146673

A Representation for Gaining Insight into Clinical Decision Models

PubMed Central

Jimison, Holly B.

1988-01-01

For many medical domains uncertainty and patient preferences are important components of decision making. Decision theory is useful as a representation for such medical models in computer decision aids, but the methodology has typically had poor performance in the areas of explanation and user interface. The additional representation of probabilities and utilities as random variables serves to provide a framework for graphical and text insight into complicated decision models. The approach allows for efficient customization of a generic model that describes the general patient population of interest to a patient- specific model. Monte Carlo simulation is used to calculate the expected value of information and sensitivity for each model variable, thus providing a metric for deciding what to emphasize in the graphics and text summary. The computer-generated explanation includes variables that are sensitive with respect to the decision or that deviate significantly from what is typically observed. These techniques serve to keep the assessment and explanation of the patient's decision model concise, allowing the user to focus on the most important aspects for that patient.

Effect of patient decision aid was influenced by presurgical evaluation among patients with osteoarthritis of the knee.

PubMed

Boland, Laura; Taljaard, Monica; Dervin, Geoffrey; Trenaman, Logan; Tugwell, Peter; Pomey, Marie-Pascale; Stacey, Dawn

2018-02-01

Decision aids help patients make total joint arthroplasty decisions, but presurgical evaluation might influence the effects of a decision aid. We compared the effects of a decision aid among patients considering total knee arthroplasty at 2 surgical screening clinics with different evaluation processes. We performed a subgroup analysis of a randomized controlled trial. Patients were recruited from 2 surgical screening clinics: an academic clinic providing 20-minute physician consultations and a community clinic providing 45-minute physiotherapist/nurse consultations with education. We compared the effects of decision quality, decisional conflict and surgery rate using Cochran-Mantel-Haenszel χ 2 tests and the Breslow-Day test. We evaluated 242 patients: 123 from the academic clinic (61 who used the decision aid and 62 controls) and 119 from the community clinic (59 who used the decision aid and 60 controls). Results suggested a between-site difference in the effect of the decision aid on the patients' decision quality ( p = 0.09): at the academic site, patients who used the decision aid were more likely to make better-quality decisions than controls (54% v. 35%, p = 0.044), but not at the community site (47% v. 51%, p = 0.71). Fewer patients who used decision aids at the academic site than at the community site experienced decisional conflict ( p = 0.007) (33% v. 52%, p = 0.05 at the academic site and 40% v. 24%, p = 0.08 at the community site). The effect of the decision aid on surgery rates did not differ between sites ( p = 0.65). The decision aid had a greater effect at the academic site than at the community site, which provided longer consultations with more verbal education. Hence, decision aids might be of greater value when more extensive total knee arthroplasty presurgical assessment and counselling are either impractical or unavailable.

Modeling, simulation, and analysis at Sandia National Laboratories for health care systems

NASA Astrophysics Data System (ADS)

Polito, Joseph

1994-12-01

Modeling, Simulation, and Analysis are special competencies of the Department of Energy (DOE) National Laboratories which have been developed and refined through years of national defense work. Today, many of these skills are being applied to the problem of understanding the performance of medical devices and treatments. At Sandia National Laboratories we are developing models at all three levels of health care delivery: (1) phenomenology models for Observation and Test, (2) model-based outcomes simulations for Diagnosis and Prescription, and (3) model-based design and control simulations for the Administration of Treatment. A sampling of specific applications include non-invasive sensors for blood glucose, ultrasonic scanning for development of prosthetics, automated breast cancer diagnosis, laser burn debridement, surgical staple deformation, minimally invasive control for administration of a photodynamic drug, and human-friendly decision support aids for computer-aided diagnosis. These and other projects are being performed at Sandia with support from the DOE and in cooperation with medical research centers and private companies. Our objective is to leverage government engineering, modeling, and simulation skills with the biotechnical expertise of the health care community to create a more knowledge-rich environment for decision making and treatment.

Needs assessment for next generation computer-aided mammography reference image databases and evaluation studies.

PubMed

Horsch, Alexander; Hapfelmeier, Alexander; Elter, Matthias

2011-11-01

Breast cancer is globally a major threat for women's health. Screening and adequate follow-up can significantly reduce the mortality from breast cancer. Human second reading of screening mammograms can increase breast cancer detection rates, whereas this has not been proven for current computer-aided detection systems as "second reader". Critical factors include the detection accuracy of the systems and the screening experience and training of the radiologist with the system. When assessing the performance of systems and system components, the choice of evaluation methods is particularly critical. Core assets herein are reference image databases and statistical methods. We have analyzed characteristics and usage of the currently largest publicly available mammography database, the Digital Database for Screening Mammography (DDSM) from the University of South Florida, in literature indexed in Medline, IEEE Xplore, SpringerLink, and SPIE, with respect to type of computer-aided diagnosis (CAD) (detection, CADe, or diagnostics, CADx), selection of database subsets, choice of evaluation method, and quality of descriptions. 59 publications presenting 106 evaluation studies met our selection criteria. In 54 studies (50.9%), the selection of test items (cases, images, regions of interest) extracted from the DDSM was not reproducible. Only 2 CADx studies, not any CADe studies, used the entire DDSM. The number of test items varies from 100 to 6000. Different statistical evaluation methods are chosen. Most common are train/test (34.9% of the studies), leave-one-out (23.6%), and N-fold cross-validation (18.9%). Database-related terminology tends to be imprecise or ambiguous, especially regarding the term "case". Overall, both the use of the DDSM as data source for evaluation of mammography CAD systems, and the application of statistical evaluation methods were found highly diverse. Results reported from different studies are therefore hardly comparable. Drawbacks of the DDSM (e.g. varying quality of lesion annotations) may contribute to the reasons. But larger bias seems to be caused by authors' own decisions upon study design. RECOMMENDATIONS/CONCLUSION: For future evaluation studies, we derive a set of 13 recommendations concerning the construction and usage of a test database, as well as the application of statistical evaluation methods.

A computer-aided differential diagnosis between UIP and NSIP using automated assessment of the extent and distribution of regional disease patterns at HRCT: comparison with the radiologist's decision

NASA Astrophysics Data System (ADS)

Kim, Namkug; Seo, Joon Beom; Park, Sang Ok; Lee, Youngjoo; Lee, Jeongjin

2009-02-01

To evaluate the accuracy of computer aided differential diagnosis (CADD) between usual interstitial pneumonia (UIP) and nonspecific interstitial pneumonia (NSIP) at HRCT in comparison with that of a radiologist's decision. A computerized classification for six local disease patterns (normal, NL; ground-glass opacity, GGO; reticular opacity, RO; honeycombing, HC; emphysema, EM; and consolidation, CON) using texture/shape analyses and a SVM classifier at HRCT was used for pixel-by-pixel labeling on the whole lung area. The mode filter was applied on the results to reduce noise. Area fraction (AF) of each pattern, directional probabilistic density function (pdf) (dPDF: mean, SD, skewness of pdf /3 directions: superior-inferior, anterior-posterior, central-peripheral), regional cluster distribution pattern (RCDP: number, mean, SD of clusters, mean, SD of centroid of clusters) were automatically evaluated. Spatially normalized left and right lungs were evaluated separately. Disease division index (DDI) on every combination of AFs and asymmetric index (AI) between left and right lung ((left-right)/left) were also evaluated. To assess the accuracy of the system, fifty-four HRCT data sets in patients with pathologically diagnosed UIP (n=26) and NSIP (n=28) were used. For a classification procedure, a CADD-SVM classifier with internal parameter optimization, and sequential forward floating feature selection (SFFS) were employed. The accuracy was assessed by a 5-folding cross validation with 20- times repetition. For comparison, two thoracic radiologists reviewed the whole HRCT images without clinical information and diagnose each case either as UIP or NSIP. The accuracies of radiologists' decision were 0.75 and 0.87, respectively. The accuracies of the CADD system using the features of AF, dPDF, AI of dPDF, RDP, AI of RDP, DDI were 0.70, 0.79, 0.77, 0.80, 0.78, 0.81, respectively. The accuracy of optimized CADD using all features after SFFS was 0.91. We developed the CADD system to differentiate between UIP and NSIP using automated assessment of the extent and distribution of regional disease patterns at HRCT.

Computer-aided system for diabetes care in Berlin, G.D.R.

PubMed

Thoelke, H; Meusel, K; Ratzmann, K P

1990-01-01

In the Centre of Diabetes and Metabolic Disorders of Berlin, G.D.R., a computer-aided care system has been used since 1974, aiming at relieving physicians and medical staff from routine tasks and rendering possible epidemiological research on an unselected diabetes population of a defined area. The basis of the system is the data bank on diabetics (DB), where at present data from approximately 55,000 patients are stored. DB is used as a diabetes register of Berlin. On the basis of standardised criteria of diagnosis and therapy of diabetes mellitus in our dispensary care system, DB facilitates representative epidemiological analyses of the diabetic population, e.g. prevalence, incidence, duration of diabetes, and modes of treatment. The availability of general data on the population or the selection of specified groups of patients serves the management of the care system. Also, it supports the computer-aided recall of type II diabetics, treated either with diet alone or with diet and oral drugs. In this way, the standardised evaluation of treatment strategies in large populations of diabetics is possible on the basis of uniform metabolic criteria (blood glucose plus urinary glucose). The system consists of a main computer in the data processing unit and of personal computers in the diabetes centre which can be used either individually or as terminals to the main computer. During 14 years of experience, the computer-aided out-patient care of type II diabetics has proved efficient in a big-city area with a large population.

The development of a disease oriented eFolder for multiple sclerosis decision support

NASA Astrophysics Data System (ADS)

Ma, Kevin; Jacobs, Colin; Fernandez, James; Amezcua, Lilyana; Liu, Brent

2010-03-01

Multiple sclerosis (MS) is a demyelinating disease of the central nervous system. The chronic nature of MS necessitates multiple MRI studies to track disease progression. Currently, MRI assessment of multiple sclerosis requires manual lesion measurement and yields an estimate of lesion volume and change that is highly variable and user-dependent. In the setting of a longitudinal study, disease trends and changes become difficult to extrapolate from the lesions. In addition, it is difficult to establish a correlation between these imaged lesions and clinical factors such as treatment course. To address these clinical needs, an MS specific e-Folder for decision support in the evaluation and assessment of MS has been developed. An e-Folder is a disease-centric electronic medical record in contrast to a patient-centric electronic health record. Along with an MS lesion computer aided detection (CAD) package for lesion load, location, and volume, clinical parameters such as patient demographics, disease history, clinical course, and treatment history are incorporated to make the e-Folder comprehensive. With the integration of MRI studies together with related clinical data and informatics tools designed for monitoring multiple sclerosis, it provides a platform to improve the detection of treatment response in patients with MS. The design and deployment of MS e-Folder aims to standardize MS lesion data and disease progression to aid in decision making and MS-related research.

Classification of clinical significance of MRI prostate findings using 3D convolutional neural networks

NASA Astrophysics Data System (ADS)

Mehrtash, Alireza; Sedghi, Alireza; Ghafoorian, Mohsen; Taghipour, Mehdi; Tempany, Clare M.; Wells, William M.; Kapur, Tina; Mousavi, Parvin; Abolmaesumi, Purang; Fedorov, Andriy

2017-03-01

Prostate cancer (PCa) remains a leading cause of cancer mortality among American men. Multi-parametric magnetic resonance imaging (mpMRI) is widely used to assist with detection of PCa and characterization of its aggressiveness. Computer-aided diagnosis (CADx) of PCa in MRI can be used as clinical decision support system to aid radiologists in interpretation and reporting of mpMRI. We report on the development of a convolution neural network (CNN) model to support CADx in PCa based on the appearance of prostate tissue in mpMRI, conducted as part of the SPIE-AAPM-NCI PROSTATEx challenge. The performance of different combinations of mpMRI inputs to CNN was assessed and the best result was achieved using DWI and DCE-MRI modalities together with the zonal information of the finding. On the test set, the model achieved an area under the receiver operating characteristic curve of 0.80.

Integrated computer-aided design using minicomputers

NASA Technical Reports Server (NTRS)

Storaasli, O. O.

1980-01-01

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

[A computer-aided image diagnosis and study system].

PubMed

Li, Zhangyong; Xie, Zhengxiang

2004-08-01

The revolution in information processing, particularly the digitizing of medicine, has changed the medical study, work and management. This paper reports a method to design a system for computer-aided image diagnosis and study. Combined with some good idea of graph-text system and picture archives communicate system (PACS), the system was realized and used for "prescription through computer", "managing images" and "reading images under computer and helping the diagnosis". Also typical examples were constructed in a database and used to teach the beginners. The system was developed by the visual developing tools based on object oriented programming (OOP) and was carried into operation on the Windows 9X platform. The system possesses friendly man-machine interface.

Integrated Computer-Aided Drafting Instruction (ICADI).

ERIC Educational Resources Information Center

Chen, C. Y.; McCampbell, David H.

Until recently, computer-aided drafting and design (CAD) systems were almost exclusively operated on mainframes or minicomputers and their cost prohibited many schools from offering CAD instruction. Today, many powerful personal computers are capable of performing the high-speed calculation and analysis required by the CAD application; however,…

SIMULATING RADIONUCLIDE FATE AND TRANSPORT IN THE UNSATURATED ZONE: EVALUATION AND SENSITIVITY ANALYSES OF SELECT COMPUTER MODELS

EPA Science Inventory

Numerical, mathematical models of water and chemical movement in soils are used as decision aids for determining soil screening levels (SSLs) of radionuclides in the unsaturated zone. Many models require extensive input parameters which include uncertainty due to soil variabil...

Unsupervised MDP Value Selection for Automating ITS Capabilities

ERIC Educational Resources Information Center

Stamper, John; Barnes, Tiffany

2009-01-01

We seek to simplify the creation of intelligent tutors by using student data acquired from standard computer aided instruction (CAI) in conjunction with educational data mining methods to automatically generate adaptive hints. In our previous work, we have automatically generated hints for logic tutoring by constructing a Markov Decision Process…

Decision aid prototype development for parents considering adenotonsillectomy for their children with sleep disordered breathing.

PubMed

Maguire, Erin; Hong, Paul; Ritchie, Krista; Meier, Jeremy; Archibald, Karen; Chorney, Jill

2016-11-04

To describe the process involved in developing a decision aid prototype for parents considering adenotonsillectomy for their children with sleep disordered breathing. A paper-based decision aid prototype was developed using the framework proposed by the International Patient Decision Aids Standards Collaborative. The decision aid focused on two main treatment options: watchful waiting and adenotonsillectomy. Usability was assessed with parents of pediatric patients and providers with qualitative content analysis of semi-structured interviews, which included open-ended user feedback. A steering committee composed of key stakeholders was assembled. A needs assessment was then performed, which confirmed the need for a decision support tool. A decision aid prototype was developed and modified based on semi-structured qualitative interviews and a scoping literature review. The prototype provided information on the condition, risk and benefits of treatments, and values clarification. The prototype underwent three cycles of accessibility, feasibility, and comprehensibility testing, incorporating feedback from all stakeholders to develop the final decision aid prototype. A standardized, iterative methodology was used to develop a decision aid prototype for parents considering adenotonsillectomy for their children with sleep disordered breathing. The decision aid prototype appeared feasible, acceptable and comprehensible, and may serve as an effective means of improving shared decision-making.

A Mobile Decision Aid for Determining Detection Probabilities for Acoustic Targets

DTIC Science & Technology

2002-08-01

propagation mobile application . Personal Computer Memory Card International Association, an organization of some 500 companies that has developed a...SENSOR: lHuman and possible outputs, it was felt that for a mobile application , the interface and number of output parameters should be kept simple...value could be computed on the server and transmitted back to the mobile application for display. FUTURE CAPABILITIES 2-D/3-D Displays The full ABFA

Aids to navigation service force mix 2000 project. Volume 1 : development and application of an aids to navigation service force mix decision support system

DOT National Transportation Integrated Search

1992-07-01

The Aids to Navigation (ATON) Service Force Mix (SFM) 2000 Project is documented in a Project Overview and three separately bound volumes. This is the Project Overview. The Project Overview describes the purpose, approach, analysis, and results of th...

Airborne ASW Decision Aiding Implementation Feasibility.

DTIC Science & Technology

1981-06-01

E and LAMPS WK III are used as candidate host platforms . Decision aid data modules are synthesized and sized estimates are made of decision aid...1.2 Scope...........................1-1 1.2.1 Aircraft Investiqation Purpose ......... 1-1 1.2.2 Platform Selection ......... ............ 1-2 1.2.3...4 2.3.1 Platform Modules Needed for Decision Aid . ... 2-4 Implementation 2.3.2 Data Modules for Decision Aids .......... ... 2-21 2.3.3

Minnesota Computer Aided Library System (MCALS); University of Minnesota Subsystem Cost/Benefits Analysis.

ERIC Educational Resources Information Center

Lourey, Eugene D., Comp.

The Minnesota Computer Aided Library System (MCALS) provides a basis of unification for library service program development in Minnesota for eventual linkage to the national information network. A prototype plan for communications functions is illustrated. A cost/benefits analysis was made to show the cost/effectiveness potential for MCALS. System…

Performance Measures in Courses Using Computer-Aided Personalized System of Instruction

ERIC Educational Resources Information Center

Springer, C. R.; Pear, J. J.

2008-01-01

Archived data from four courses taught with computer-aided personalized system of instruction (CAPSI)--an online, self-paced, instructional program--were used to explore the relationship between objectively rescored final exam grades, peer reviewing, and progress rate--i.e., the rate at which students completed unit tests. There was a strong…

[Basic concept in computer assisted surgery].

PubMed

Merloz, Philippe; Wu, Hao

2006-03-01

To investigate application of medical digital imaging systems and computer technologies in orthopedics. The main computer-assisted surgery systems comprise the four following subcategories. (1) A collection and recording process for digital data on each patient, including preoperative images (CT scans, MRI, standard X-rays), intraoperative visualization (fluoroscopy, ultrasound), and intraoperative position and orientation of surgical instruments or bone sections (using 3D localises). Data merging based on the matching of preoperative imaging (CT scans, MRI, standard X-rays) and intraoperative visualization (anatomical landmarks, or bone surfaces digitized intraoperatively via 3D localiser; intraoperative ultrasound images processed for delineation of bone contours). (2) In cases where only intraoperative images are used for computer-assisted surgical navigation, the calibration of the intraoperative imaging system replaces the merged data system, which is then no longer necessary. (3) A system that provides aid in decision-making, so that the surgical approach is planned on basis of multimodal information: the interactive positioning of surgical instruments or bone sections transmitted via pre- or intraoperative images, display of elements to guide surgical navigation (direction, axis, orientation, length and diameter of a surgical instrument, impingement, etc. ). And (4) A system that monitors the surgical procedure, thereby ensuring that the optimal strategy defined at the preoperative stage is taken into account. It is possible that computer-assisted orthopedic surgery systems will enable surgeons to better assess the accuracy and reliability of the various operative techniques, an indispensable stage in the optimization of surgery.

CAD/CAM complete dentures: a review of two commercial fabrication systems.

PubMed

Kattadiyil, Mathew T; Goodacre, Charles J; Baba, Nadim Z

2013-06-01

The use of computer-aided design and computer-aided manufacturing (CAD/CAM) has become available for complete dentures through the AvaDent and Dentca systems. AvaDent uses laser scanning and computer technology. Teeth are arranged and bases formed using proprietary software.The bases are milled from prepolymerized pucks of resin. Dentca uses computer software to produce virtual maxillary and mandibular edentulous ridges, arrange the teeth and form bases. The dentures are fabricated using a conventional processing technique.

Year 2000 Computing Crisis: Significant Risks Remain to Department of Education's Student Financial Aid Systems. Testimony before the Subcommittee on Oversight and Investigations, Committee on Education and the Workforce, House of Representatives.

ERIC Educational Resources Information Center

Willemssen, Joel C.

This testimony discusses the risks faced by the U.S. Department of Education due to the year 2000 (Y2K) computing crisis, focusing on student financial aid systems, the actions the Department has taken in recent months to address these risks, and the key issues the Department must deal with if its computer systems are to be ready for the century…

Student Performance in Computer-Assisted Instruction in Programming.

ERIC Educational Resources Information Center

Friend, Jamesine E.; And Others

A computer-assisted instructional system to teach college students the computer language, AID (Algebraic Interpretive Dialogue), two control programs, and data collected by the two control programs are described. It was found that although first response errors were often those of AID syntax, such errors were easily corrected. Secondly, while…

Computer-Assisted Instruction: One Aid for Teachers of Reading.

ERIC Educational Resources Information Center

Rauch, Margaret; Samojeden, Elizabeth

Computer assisted instruction (CAI), an instructional system with direct interaction between the student and the computer, can be a valuable aid for presenting new concepts, for reinforcing of selective skills, and for individualizing instruction. The advantages CAI provides include self-paced learning, more efficient allocation of classroom time,…

Effect of patient decision aid was influenced by presurgical evaluation among patients with osteoarthritis of the knee.

PubMed

Boland, Laura; Taljaard, Monica; Dervin, Geoffrey; Trenaman, Logan; Tugwell, Peter; Pomey, Marie-Pascale; Stacey, Dawn

2017-12-01

Decision aids help patients make total joint arthroplasty decisions, but presurgical evaluation might influence the effects of a decision aid. We compared the effects of a decision aid among patients considering total knee arthroplasty at 2 surgical screening clinics with different evaluation processes. We performed a subgroup analysis of a randomized controlled trial. Patients were recruited from 2 surgical screening clinics: an academic clinic providing 20-minute physician consultations and a community clinic providing 45-minute physiotherapist/nurse consultations with education. We compared the effects of decision quality, decisional conflict and surgery rate using Cochran-Mantel-Haenszel χ 2 tests and the Breslow-Day test. We evaluated 242 patients: 123 from the academic clinic (61 who used the decision aid and 62 controls) and 119 from the community clinic (59 who used the decision aid and 60 controls). Results suggested a between-site difference in the effect of the decision aid on the patients' decision quality ( p = 0.09): at the academic site, patients who used the decision were more likely to make better-quality decisions than controls (54% v. 35%, p = 0.044), but not at the community site (47% v. 51%, p = 0.71). Fewer patients who used decision aids at the academic site than at the community site experienced decisional conflict ( p = 0.007) (33% v. 52%, p = 0.05 at the academic site and 40% v. 24%, p = 0.08 at the community site). The effect of the decision aid on surgery rates did not differ between sites ( p = 0.65). The decision aid had a greater effect at the academic site than at the community site, which provided longer consultations with more verbal education. Hence, decision aids might be of greater value when more extensive total knee arthroplasty presurgical assessment and counselling are either impractical or unavailable.

Preliminary testing of a just‐in‐time, user‐defined values clarification exercise to aid lower literate women in making informed breast cancer treatment decisions

PubMed Central

Jibaja‐Weiss, Maria L.; Volk, Robert J.; Friedman, Lois C.; Granchi, Thomas S.; Neff, Nancy E.; Spann, Stephen J.; Robinson, Emily K.; Aoki, Noriaki; Robert Beck, J.

2006-01-01

Abstract Objective  To report on the initial testing of a values clarification exercise utilizing a jewellery box within a computerized patient decision aid (CPtDA) designed to assist women in making a surgical breast cancer treatment decision. Design  Pre‐post design, with patients interviewed after diagnosis, and then after completing the CPtDA sometime later at their preoperative visit. Sample  Fifty‐one female patients, who are low literate and naïve computer users, newly diagnosed with early stage breast cancer from two urban public hospitals. Intervention  A computerized decision aid that combines entertainment‐education (edutainment) with enhanced (factual) content. An interactive jewellery box is featured to assist women in: (1) recording and reflecting over issues of concern with possible treatments, (2) deliberating over surgery decision, and (3) communicating with physician and significant others. Outcomes  Patients’ use of the jewellery box to store issues during completion of the CPtDA, and perceived clarity of values in making a treatment decision, as measured by a low literacy version of the Decisional Conflict Scale (DCS). Results  Over half of the participants utilized the jewellery box to store issues they found concerning about the treatments. On average, users flagged over 13 issues of concern with the treatments. Scores on the DCS Uncertainty and Feeling Unclear about Values subscales were lower after the intervention compared to before the decision was made. Conclusions  A values clarification exercise using an interactive jewellery box may be a promising method for promoting informed treatment decision making by low literacy breast cancer patients. PMID:16911136

Infrastructure-Based Sensors Augmenting Efficient Autonomous Vehicle Operations: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jun, Myungsoo; Markel, Anthony J

Autonomous vehicle technology development relies on an on-board network of fused sensor inputs for safe and efficient operation. The fused sensors offer multiple perspectives of similar information aiding in system decision robustness. The high cost of full systems on individual vehicles is seen as a potential barrier to broad adoption and achieving system energy efficiency gains. Since traffic in autonomous vehicle technology development relies on an on-board network of fused sensor inputs for safe and efficient operation. The fused sensors offer multiple perspectives of similar information aiding in system decision robustness. The high cost of full systems on individual vehiclesmore » is seen as a potential barrier to broad adoption and achieving system energy efficiency gains.« less

Web-Based Versus Usual Care and Other Formats of Decision Aids to Support Prostate Cancer Screening Decisions: Systematic Review and Meta-Analysis.

PubMed

Baptista, Sofia; Teles Sampaio, Elvira; Heleno, Bruno; Azevedo, Luís Filipe; Martins, Carlos

2018-06-26

Prostate cancer is a leading cause of cancer among men. Because screening for prostate cancer is a controversial issue, many experts in the field have defended the use of shared decision making using validated decision aids, which can be presented in different formats (eg, written, multimedia, Web). Recent studies have concluded that decision aids improve knowledge and reduce decisional conflict. This meta-analysis aimed to investigate the impact of using Web-based decision aids to support men's prostate cancer screening decisions in comparison with usual care and other formats of decision aids. We searched PubMed, CINAHL, PsycINFO, and Cochrane CENTRAL databases up to November 2016. This search identified randomized controlled trials, which assessed Web-based decision aids for men making a prostate cancer screening decision and reported quality of decision-making outcomes. Two reviewers independently screened citations for inclusion criteria, extracted data, and assessed risk of bias. Using a random-effects model, meta-analyses were conducted pooling results using mean differences (MD), standardized mean differences (SMD), and relative risks (RR). Of 2406 unique citations, 7 randomized controlled trials met the inclusion criteria. For risk of bias, selective outcome reporting and participant/personnel blinding were mostly rated as unclear due to inadequate reporting. Based on seven items, two studies had high risk of bias for one item. Compared to usual care, Web-based decision aids increased knowledge (SMD 0.46; 95% CI 0.18-0.75), reduced decisional conflict (MD -7.07%; 95% CI -9.44 to -4.71), and reduced the practitioner control role in the decision-making process (RR 0.50; 95% CI 0.31-0.81). Web-based decision aids compared to printed decision aids yielded no differences in knowledge, decisional conflict, and participation in decision or screening behaviors. Compared to video decision aids, Web-based decision aids showed lower average knowledge scores (SMD -0.50; 95% CI -0.88 to -0.12) and a slight decrease in prostate-specific antigen screening (RR 1.12; 95% CI 1.01-1.25). According to this analysis, Web-based decision aids performed similarly to alternative formats (ie, printed, video) for the assessed decision-quality outcomes. The low cost, readiness, availability, and anonymity of the Web can be an advantage for increasing access to decision aids that support prostate cancer screening decisions among men. ©Sofia Baptista, Elvira Teles Sampaio, Bruno Heleno, Luís Filipe Azevedo, Carlos Martins. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 26.06.2018.

Testing the effects of a decision aid for prostate cancer screening.

PubMed

Rubel, Stephanie K; Miller, Jacqueline W; Stephens, Robert L; Xu, Ye; Scholl, Lawrence E; Holden, E Wayne; Stroud, Leonardo A; Volk, Robert J

2010-04-01

There is an ever-growing trend toward more patient involvement in making health care decisions. This trend has been accompanied by the development of "informed decision-making" interventions to help patients become more engaged and comfortable with making these decisions. We describe the effects of a prostate cancer screening decision aid on knowledge, beliefs about screening, risk perception, control preferences, decisional conflict, and decisional anxiety. Data were collected from 200 males aged 50-70 years in the general population who randomly were assigned to exposure to the decision aid or no exposure as a control condition. A Solomon four-group design was used to test for possible pretest sensitization effects and to assess the effects of exposure to the decision aid. No significant pretest sensitization effects were found. Analysis of the exposure effects found that knowledge increased significantly for those exposed to the decision aid compared with those unexposed. Exposure to the decision aid also had some influence on decreasing both decisional conflict and decisional anxiety. Decision aids can play an important role in increasing patients' knowledge and decreasing anxiety when asked to make health care decisions.

A comparison of web-based versus print-based decision AIDS for prostate cancer screening: participants' evaluation and utilization.

PubMed

Tomko, Catherine; Davis, Kimberly M; Luta, George; Krist, Alexander H; Woolf, Steven H; Taylor, Kathryn L

2015-01-01

Patient decision aids facilitate informed decision making for medical tests and procedures that have uncertain benefits. To describe participants' evaluation and utilization of print-based and web-based prostate cancer screening decision aids that were found to improve decisional outcomes in a prior randomized controlled trial. Men completed brief telephone interviews at baseline, one month, and 13 months post-randomization. Participants were primary care patients, 45-70 years old, who received the print-based (N = 628) or web-based decision aid (N = 625) and completed the follow-up assessments. We assessed men's baseline preference for web-based or print-based materials, time spent using the decision aids, comprehension of the overall message, and ratings of the content. Decision aid use was self-reported by 64.3 % (web) and 81.8 % (print) of participants. Significant predictors of decision aid use were race (white vs. non-white, OR = 2.43, 95 % CI: 1.77, 3.35), higher education (OR = 1.68, 95 % CI: 1.06, 2.70) and trial arm (print vs. web, OR = 2.78, 95 % CI: 2.03, 3.83). Multivariable analyses indicated that web-arm participants were more likely to use the website when they preferred web-based materials (OR: 1.91, CI: 1.17, 3.12), whereas use of the print materials was not significantly impacted by a preference for print-based materials (OR: 0.69, CI: 0.38, 1.25). Comprehension of the decision aid message (i.e., screening is an individual decision) did not significantly differ between arms in adjusted analyses (print: 61.9 % and web: 68.2 %, p = 0.42). Decision aid use was independently influenced by race, education, and the decision aid medium, findings consistent with the 'digital divide.' These results suggest that when it is not possible to provide this age cohort with their preferred decision aid medium, print materials will be more highly used than web-based materials. Although there are many advantages to web-based decision aids, providing an option for print-based decision aids should be considered.

Assisting informed decision making for labour analgesia: a randomised controlled trial of a decision aid for labour analgesia versus a pamphlet.

PubMed

Raynes-Greenow, Camille H; Nassar, Natasha; Torvaldsen, Siranda; Trevena, Lyndal; Roberts, Christine L

2010-04-08

Most women use some method of pain relief during labour. There is extensive research evidence available of pharmacological pain relief during labour; however this evidence is not readily available to pregnant women. Decision aids are tools that present evidence based information and allow preference elicitation. We developed a labour analgesia decision aid. Using a RCT design women either received a decision aid or a pamphlet. Eligible women were primiparous, > or = 37 weeks, planning a vaginal birth of a single infant and had sufficient English to complete the trial materials. We used a combination of affective (anxiety, satisfaction and participation in decision-making) and behavioural outcomes (intention and analgesia use) to assess the impact of the decision aid, which were assessed before labour. 596 women were randomised (395 decision aid group, 201 pamphlet group). There were significant differences in knowledge scores between the decision aid group and the pamphlet group (mean difference 8.6, 95% CI 3.70, 13.40). There were no differences between decisional conflict scores (mean difference -0.99 (95% CI -3.07, 1.07), or anxiety (mean difference 0.3, 95% CI -2.15, 1.50). The decision aid group were significantly more likely to consider their care providers opinion (RR 1.28 95%CI 0.64, 0.95). There were no differences in analgesia use and poor follow through between antenatal analgesia intentions and use. This decision aid improves women's labour analgesia knowledge without increasing anxiety. Significantly, the decision aid group were more informed of labour analgesia options, and considered the opinion of their care providers more often when making their analgesia decisions, thus improving informed decision making. Trial registration no: ISRCTN52287533.

Micro and Mainframe Computer Models for Improved Planning in Awarding Financial Aid to Disadvantaged Students.

ERIC Educational Resources Information Center

Attinasi, Louis C., Jr.; Fenske, Robert H.

1988-01-01

Two computer models used at Arizona State University recognize the tendency of students from low-income and minority backgrounds to apply for assistance late in the funding cycle. They permit administrators to project the amount of aid needed by such students. The Financial Aid Computerized Tracking System is described. (Author/MLW)

What is lacking in current decision aids on cancer screening?

PubMed Central

Jimbo, Masahito; Rana, Gurpreet K.; Hawley, Sarah; Holmes-Rovner, Margaret; Kelly-Blake, Karen; Nease, Donald E.; Ruffin, Mack T.

2013-01-01

Recent guidelines on cancer screening have given not only more screening options but also conflicting recommendations. Thus, patients, with their clinicians’ support, must decide whether to get screened or not, which modality to use, and how often to get screened. Decision aids could potentially lead to better shared decision making regarding screening between the patient and the clinician. We reviewed 73 decision aids on screening for breast, cervical, colorectal, and prostate cancers. The goal of this review was to assess the effectiveness of such decision aids, examine areas in need for more research, and determine how the decision aids can be currently applied in the real world setting. Most studies used sound study design. Significant variation existed in setting, theoretical framework, and measured outcomes. Just over a third of the decision aids included an explicit values clarification. Other than knowledge, little consistency was noted in which patient attributes were measured as outcomes. Few studies actually measured shared decision making. Little information was available on the feasibility and outcomes of integrating decision aids into practice. We discuss the implications for future research, as well as what the clinicians can do now to incorporate decision aids into their practice. PMID:23504675

High-performance computer aided detection system for polyp detection in CT colonography with fluid and fecal tagging

NASA Astrophysics Data System (ADS)

Liu, Jiamin; Wang, Shijun; Kabadi, Suraj; Summers, Ronald M.

2009-02-01

CT colonography (CTC) is a feasible and minimally invasive method for the detection of colorectal polyps and cancer screening. Computer-aided detection (CAD) of polyps has improved consistency and sensitivity of virtual colonoscopy interpretation and reduced interpretation burden. A CAD system typically consists of four stages: (1) image preprocessing including colon segmentation; (2) initial detection generation; (3) feature selection; and (4) detection classification. In our experience, three existing problems limit the performance of our current CAD system. First, highdensity orally administered contrast agents in fecal-tagging CTC have scatter effects on neighboring tissues. The scattering manifests itself as an artificial elevation in the observed CT attenuation values of the neighboring tissues. This pseudo-enhancement phenomenon presents a problem for the application of computer-aided polyp detection, especially when polyps are submerged in the contrast agents. Second, general kernel approach for surface curvature computation in the second stage of our CAD system could yield erroneous results for thin structures such as small (6-9 mm) polyps and for touching structures such as polyps that lie on haustral folds. Those erroneous curvatures will reduce the sensitivity of polyp detection. The third problem is that more than 150 features are selected from each polyp candidate in the third stage of our CAD system. These high dimensional features make it difficult to learn a good decision boundary for detection classification and reduce the accuracy of predictions. Therefore, an improved CAD system for polyp detection in CTC data is proposed by introducing three new techniques. First, a scale-based scatter correction algorithm is applied to reduce pseudo-enhancement effects in the image pre-processing stage. Second, a cubic spline interpolation method is utilized to accurately estimate curvatures for initial detection generation. Third, a new dimensionality reduction classifier, diffusion map and local linear embedding (DMLLE), is developed for classification and false positives (FP) reduction. Performance of the improved CAD system is evaluated and compared with our existing CAD system (without applying those techniques) using CT scans of 1186 patients. These scans are divided into a training set and a test set. The sensitivity of the improved CAD system increased 18% on training data at a rate of 5 FPs per patient and 15% on test data at a rate of 5 FPs per patient. Our results indicated that the improved CAD system achieved significantly better performance on medium-sized colonic adenomas with higher sensitivity and lower FP rate in CTC.

Distributed environmental control

NASA Technical Reports Server (NTRS)

Cleveland, Gary A.

1992-01-01

We present an architecture of distributed, independent control agents designed to work with the Computer Aided System Engineering and Analysis (CASE/A) simulation tool. CASE/A simulates behavior of Environmental Control and Life Support Systems (ECLSS). We describe a lattice of agents capable of distributed sensing and overcoming certain sensor and effector failures. We address how the architecture can achieve the coordinating functions of a hierarchical command structure while maintaining the robustness and flexibility of independent agents. These agents work between the time steps of the CASE/A simulation tool to arrive at command decisions based on the state variables maintained by CASE/A. Control is evaluated according to both effectiveness (e.g., how well temperature was maintained) and resource utilization (the amount of power and materials used).

Quality indexing with computer-aided lexicography

NASA Technical Reports Server (NTRS)

Buchan, Ronald L.

1992-01-01

Indexing with computers is a far cry from indexing with the first indexing tool, the manual card sorter. With the aid of computer-aided lexicography, both indexing and indexing tools can provide standardization, consistency, and accuracy, resulting in greater quality control than ever before. A brief survey of computer activity in indexing is presented with detailed illustrations from NASA activity. Applications from techniques mentioned, such as Retrospective Indexing (RI), can be made to many indexing systems. In addition to improving the quality of indexing with computers, the improved efficiency with which certain tasks can be done is demonstrated.

Multidisciplinary analysis of actively controlled large flexible spacecraft

NASA Technical Reports Server (NTRS)

Cooper, Paul A.; Young, John W.; Sutter, Thomas R.

1986-01-01

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

Design Aids for Real-Time Systems (DARTS)

NASA Technical Reports Server (NTRS)

Szulewski, P. A.

1982-01-01

Design-Aids for Real-Time Systems (DARTS) is a tool that assists in defining embedded computer systems through tree structured graphics, military standard documentation support, and various analyses including automated Software Science parameter counting and metrics calculation. These analyses provide both static and dynamic design quality feedback which can potentially aid in producing efficient, high quality software systems.

Designing a Decision-Support System for Enrollment Management. AIR 1985 Annual Forum Paper.

ERIC Educational Resources Information Center

Glover, Robert H.

University of Hartford's decision-support system for enrollment management, which uses fourth-generation software tools, is described, with attention to the conceptual framework, design and implementation plan, and progress to date. The university's planners, institutional researchers, and admissions and financial aid officers are cooperating in…

A computer aided engineering tool for ECLS systems

NASA Technical Reports Server (NTRS)

Bangham, Michal E.; Reuter, James L.

1987-01-01

The Computer-Aided Systems Engineering and Analysis tool used by NASA for environmental control and life support system design studies is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single-phase active thermal control systems. The designer/analysis interface used is graphics-based, and allows the designer to build a model by constructing a schematic of the system under consideration. Data management functions are performed, and the program is translated into a format that is compatible with the solution routines.

Incorporation of CAD/CAM Restoration Into Navy Dentistry

DTIC Science & Technology

2017-09-26

CAD/CAM Computer-aided design /Computer-assisted manufacturing CDT Common Dental Terminology DENCAS Dental Common Access System DTF Dental...to reduce avoidable dental emergencies for deployed sailors and marines. Dental Computer-aided design /Computer-assisted manufacturing (CAD/CAM...report will review and evaluate the placement rate by Navy dentists of digitally fabricated in-office ceramic restorations compared to traditional direct

Texture classification of lung computed tomography images

NASA Astrophysics Data System (ADS)

Pheng, Hang See; Shamsuddin, Siti M.

2013-03-01

Current development of algorithms in computer-aided diagnosis (CAD) scheme is growing rapidly to assist the radiologist in medical image interpretation. Texture analysis of computed tomography (CT) scans is one of important preliminary stage in the computerized detection system and classification for lung cancer. Among different types of images features analysis, Haralick texture with variety of statistical measures has been used widely in image texture description. The extraction of texture feature values is essential to be used by a CAD especially in classification of the normal and abnormal tissue on the cross sectional CT images. This paper aims to compare experimental results using texture extraction and different machine leaning methods in the classification normal and abnormal tissues through lung CT images. The machine learning methods involve in this assessment are Artificial Immune Recognition System (AIRS), Naive Bayes, Decision Tree (J48) and Backpropagation Neural Network. AIRS is found to provide high accuracy (99.2%) and sensitivity (98.0%) in the assessment. For experiments and testing purpose, publicly available datasets in the Reference Image Database to Evaluate Therapy Response (RIDER) are used as study cases.

The role of risk-based prioritization in total quality management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C.T.

1994-10-01

The climate in which government managers must make decisions grows more complex and uncertain. All stakeholders - the public, industry, and Congress - are demanding greater consciousness, responsibility, and accountability of programs and their budgets. Yet, managerial decisions have become multifaceted, involve greater risk, and operate over much longer time periods. Over the last four or five decades, as policy analysis and decisions became more complex, scientists from psychology, operations research, systems science, and economics have developed a more or less coherent process called decision analysis to aid program management. The process of decision analysis - a systems theoretic approachmore » - provides the backdrop for this paper. The Laboratory Integrated Prioritization System (LIPS) has been developed as a systems analytic and risk-based prioritization tool to aid the management of the Tri-Labs` (Lawrence Livermore, Los Alamos, and Sandia) operating resources. Preliminary analyses of the effects of LIPS has confirmed the practical benefits of decision and systems sciences - the systematic, quantitative reduction in uncertainty. To date, the use of LIPS - and, hence, its value - has been restricted to resource allocation within the Tri-Labs` operations budgets. This report extends the role of risk-based prioritization to the support of DOE Total Quality Management (TQM) programs. Furthermore, this paper will argue for the requirement to institutionalize an evolutionary, decision theoretic approach to the policy analysis of the Department of Energy`s Program Budget.« less

Using Computer Graphics in the 90's.

ERIC Educational Resources Information Center

Towne, Violet A.

Computer-Aided Design, a hands-on program for public school teachers, was first offered in the summer of 1987 as an outgrowth of a 1986 robotics training program. Area technology teachers needed computer-aided design (CAD) training because of a New York State Education system transition from the industrial arts curriculum to a new curriculum in…

Noise studies of communication systems using the SYSTID computer aided analysis program

NASA Technical Reports Server (NTRS)

Tranter, W. H.; Dawson, C. T.

1973-01-01

SYSTID computer aided design is a simple program for simulating data systems and communication links. A trial of the efficiency of the method was carried out by simulating a linear analog communication system to determine its noise performance and by comparing the SYSTID result with the result arrived at by theoretical calculation. It is shown that the SYSTID program is readily applicable to the analysis of these types of systems.

Development of an autonomous video rendezvous and docking system, phase 2

NASA Technical Reports Server (NTRS)

Tietz, J. C.; Richardson, T. E.

1983-01-01

The critical elements of an autonomous video rendezvous and docking system were built and used successfully in a physical laboratory simulation. The laboratory system demonstrated that a small, inexpensive electronic package and a flight computer of modest size can analyze television images to derive guidance information for spacecraft. In the ultimate application, the system would use a docking aid consisting of three flashing lights mounted on a passive target spacecraft. Television imagery of the docking aid would be processed aboard an active chase vehicle to derive relative positions and attitudes of the two spacecraft. The demonstration system used scale models of the target spacecraft with working docking aids. A television camera mounted on a 6 degree of freedom (DOF) simulator provided imagery of the target to simulate observations from the chase vehicle. A hardware video processor extracted statistics from the imagery, from which a computer quickly computed position and attitude. Computer software known as a Kalman filter derived velocity information from position measurements.

Decision Aids for Multiple-Decision Disease Management as Affected by Weather Input Errors

USDA-ARS?s Scientific Manuscript database

Many disease management decision support systems (DSS) rely, exclusively or in part, on weather inputs to calculate an indicator for disease hazard. Error in the weather inputs, typically due to forecasting, interpolation or estimation from off-site sources, may affect model calculations and manage...

Development of a real-time clinical decision support system upon the web mvc-based architecture for prostate cancer treatment

PubMed Central

2011-01-01

Background A real-time clinical decision support system (RTCDSS) with interactive diagrams enables clinicians to instantly and efficiently track patients' clinical records (PCRs) and improve their quality of clinical care. We propose a RTCDSS to process online clinical informatics from multiple databases for clinical decision making in the treatment of prostate cancer based on Web Model-View-Controller (MVC) architecture, by which the system can easily be adapted to different diseases and applications. Methods We designed a framework upon the Web MVC-based architecture in which the reusable and extractable models can be conveniently adapted to other hospital information systems and which allows for efficient database integration. Then, we determined the clinical variables of the prostate cancer treatment based on participating clinicians' opinions and developed a computational model to determine the pretreatment parameters. Furthermore, the components of the RTCDSS integrated PCRs and decision factors for real-time analysis to provide evidence-based diagrams upon the clinician-oriented interface for visualization of treatment guidance and health risk assessment. Results The resulting system can improve quality of clinical treatment by allowing clinicians to concurrently analyze and evaluate the clinical markers of prostate cancer patients with instantaneous clinical data and evidence-based diagrams which can automatically identify pretreatment parameters. Moreover, the proposed RTCDSS can aid interactions between patients and clinicians. Conclusions Our proposed framework supports online clinical informatics, evaluates treatment risks, offers interactive guidance, and provides real-time reference for decision making in the treatment of prostate cancer. The developed clinician-oriented interface can assist clinicians in conveniently presenting evidence-based information to patients and can be readily adapted to an existing hospital information system and be easily applied in other chronic diseases. PMID:21385459

Development of a real-time clinical decision support system upon the Web MVC-based architecture for prostate cancer treatment.

PubMed

Lin, Hsueh-Chun; Wu, Hsi-Chin; Chang, Chih-Hung; Li, Tsai-Chung; Liang, Wen-Miin; Wang, Jong-Yi Wang

2011-03-08

A real-time clinical decision support system (RTCDSS) with interactive diagrams enables clinicians to instantly and efficiently track patients' clinical records (PCRs) and improve their quality of clinical care. We propose a RTCDSS to process online clinical informatics from multiple databases for clinical decision making in the treatment of prostate cancer based on Web Model-View-Controller (MVC) architecture, by which the system can easily be adapted to different diseases and applications. We designed a framework upon the Web MVC-based architecture in which the reusable and extractable models can be conveniently adapted to other hospital information systems and which allows for efficient database integration. Then, we determined the clinical variables of the prostate cancer treatment based on participating clinicians' opinions and developed a computational model to determine the pretreatment parameters. Furthermore, the components of the RTCDSS integrated PCRs and decision factors for real-time analysis to provide evidence-based diagrams upon the clinician-oriented interface for visualization of treatment guidance and health risk assessment. The resulting system can improve quality of clinical treatment by allowing clinicians to concurrently analyze and evaluate the clinical markers of prostate cancer patients with instantaneous clinical data and evidence-based diagrams which can automatically identify pretreatment parameters. Moreover, the proposed RTCDSS can aid interactions between patients and clinicians. Our proposed framework supports online clinical informatics, evaluates treatment risks, offers interactive guidance, and provides real-time reference for decision making in the treatment of prostate cancer. The developed clinician-oriented interface can assist clinicians in conveniently presenting evidence-based information to patients and can be readily adapted to an existing hospital information system and be easily applied in other chronic diseases.

A Group-Decision Approach for Evaluating Educational Web Sites

ERIC Educational Resources Information Center

Hwang, Gwo-Jen; Huanga, Tony C. K.; Tseng, Judy C. R.

2004-01-01

With the advent of network technologies, many educational web sites have been developed to assist students in the learning of subjects on computer networks. However, without proper aid, students may have difficulty in selecting appropriate web sites, that are of benefit to them; hence, studying, evaluating and recommending educational web sites…

A Review of Shared Decision-Making and Patient Decision Aids in Radiation Oncology.

PubMed

Woodhouse, Kristina Demas; Tremont, Katie; Vachani, Anil; Schapira, Marilyn M; Vapiwala, Neha; Simone, Charles B; Berman, Abigail T

2017-06-01

Cancer treatment decisions are complex and may be challenging for patients, as multiple treatment options can often be reasonably considered. As a result, decisional support tools have been developed to assist patients in the decision-making process. A commonly used intervention to facilitate shared decision-making is a decision aid, which provides evidence-based outcomes information and guides patients towards choosing the treatment option that best aligns with their preferences and values. To ensure high quality, systematic frameworks and standards have been proposed for the development of an optimal aid for decision making. Studies have examined the impact of these tools on facilitating treatment decisions and improving decision-related outcomes. In radiation oncology, randomized controlled trials have demonstrated that decision aids have the potential to improve patient outcomes, including increased knowledge about treatment options and decreased decisional conflict with decision-making. This article provides an overview of the shared-decision making process and summarizes the development, validation, and implementation of decision aids as patient educational tools in radiation oncology. Finally, this article reviews the findings from decision aid studies in radiation oncology and offers various strategies to effectively implement shared decision-making into clinical practice.

Nearest unlike neighbor (NUN): an aid to decision confidence estimation

NASA Astrophysics Data System (ADS)

Dasarathy, Belur V.

1995-09-01

The concept of nearest unlike neighbor (NUN), proposed and explored previously in the design of nearest neighbor (NN) based decision systems, is further exploited in this study to develop a measure of confidence in the decisions made by NN-based decision systems. This measure of confidence, on the basis of comparison with a user-defined threshold, may be used to determine the acceptability of the decision provided by the NN-based decision system. The concepts, associated methodology, and some illustrative numerical examples using the now classical Iris data to bring out the ease of implementation and effectiveness of the proposed innovations are presented.

Detection of cyst using image segmentation and building knowledge-based intelligent decision support system as an aid to telemedicine

NASA Astrophysics Data System (ADS)

Janet, J.; Natesan, T. R.; Santhosh, Ramamurthy; Ibramsha, Mohideen

2005-02-01

An intelligent decision support tool to the Radiologist in telemedicine is described. Medical prescriptions are given based on the images of cyst that has been transmitted over computer networks to the remote medical center. The digital image, acquired by sonography, is converted into an intensity image. This image is then subjected to image preprocessing which involves correction methods to eliminate specific artifacts. The image is resized into a 256 x 256 matrix by using bilinear interpolation method. The background area is detected using distinct block operation. The area of the cyst is calculated by removing the background area from the original image. Boundary enhancement and morphological operations are done to remove unrelated pixels. This gives us the cyst volume. This segmented image of the cyst is sent to the remote medical center for analysis by Knowledge based artificial Intelligent Decision Support System (KIDSS). The type of cyst is detected and reported to the control mechanism of KIDSS. Then the inference engine compares this with the knowledge base and gives appropriate medical prescriptions or treatment recommendations by applying reasoning mechanisms at the remote medical center.

Patient Perspectives on Low-Dose Computed Tomography for Lung Cancer Screening, New Mexico, 2014

PubMed Central

Sussman, Andrew L.; Murrietta, Ambroshia M.; Getrich, Christina M.; Rhyne, Robert; Crowell, Richard E.; Taylor, Kathryn L.; Reifler, Ellen J.; Wescott, Pamela H.; Saeed, Ali I.; Hoffman, Richard M.

2016-01-01

Introduction National guidelines call for annual lung cancer screening for high-risk smokers using low-dose computed tomography (LDCT). The objective of our study was to characterize patient knowledge and attitudes about lung cancer screening, smoking cessation, and shared decision making by patient and health care provider. Methods We conducted semistructured qualitative interviews with patients with histories of heavy smoking who received care at a Federally Qualified Health Center (FQHC Clinic) and at a comprehensive cancer center-affiliated chest clinic (Chest Clinic) in Albuquerque, New Mexico. The interviews, conducted from February through September 2014, focused on perceptions about health screening, knowledge and attitudes about LDCT screening, and preferences regarding decision aids. We used a systematic iterative analytic process to identify preliminary and emergent themes and to create a coding structure. Results We reached thematic saturation after 22 interviews (10 at the FQHC Clinic, 12 at the Chest Clinic). Most patients were unaware of LDCT screening for lung cancer but were receptive to the test. Some smokers said they would consider quitting smoking if their screening result were positive. Concerns regarding screening were cost, radiation exposure, and transportation issues. To support decision making, most patients said they preferred one-on-one discussions with a provider. They also valued decision support tools (print materials, videos), but raised concerns about readability and Internet access. Conclusion Implementing lung cancer screening in sociodemographically diverse populations poses significant challenges. The value of tobacco cessation counseling cannot be overemphasized. Effective interventions for shared decision making to undergo lung cancer screening will need the active engagement of health care providers and will require the use of accessible decision aids designed for people with low health literacy. PMID:27536900

Computer-aided diagnosis of focal liver lesions by use of physicians' subjective classification of echogenic patterns in baseline and contrast-enhanced ultrasonography.

PubMed

Sugimoto, Katsutoshi; Shiraishi, Junji; Moriyasu, Fuminori; Doi, Kunio

2009-04-01

To develop a computer-aided diagnostic (CAD) scheme for classifying focal liver lesions (FLLs) by use of physicians' subjective classification of echogenic patterns of FLLs on baseline and contrast-enhanced ultrasonography (US). A total of 137 hepatic lesions in 137 patients were evaluated with B-mode and NC100100 (Sonazoid)-enhanced pulse-inversion US; lesions included 74 hepatocellular carcinomas (HCCs) (23: well-differentiated, 36: moderately differentiated, 15: poorly differentiated HCCs), 33 liver metastases, and 30 liver hemangiomas. Three physicians evaluated single images at B-mode and arterial phases with a cine mode. Physicians were asked to classify each lesion into one of eight B-mode and one of eight enhancement patterns, but did not make a diagnosis. To classify five types of FLLs, we employed a decision tree model with four decision nodes and four artificial neural networks (ANNs). The results of the physicians' pattern classifications were used successively for four different ANNs in making decisions at each of the decision nodes in the decision tree model. The classification accuracies for the 137 FLLs were 84.8% for metastasis, 93.3% for hemangioma, and 98.6% for all HCCs. In addition, the classification accuracies for histological differentiation types of HCCs were 65.2% for well-differentiated HCC, 41.7% for moderately differentiated HCC, and 80.0% for poorly differentiated HCC. This CAD scheme has the potential to improve the diagnostic accuracy of liver lesions. However, the accuracy in the histologic differential diagnosis of HCC based on baseline and contrast-enhanced US is still limited.

The second iteration of the Systems Prioritization Method: A systems prioritization and decision-aiding tool for the Waste Isolation Pilot Plant: Volume 2, Summary of technical input and model implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prindle, N.H.; Mendenhall, F.T.; Trauth, K.

1996-05-01

The Systems Prioritization Method (SPM) is a decision-aiding tool developed by Sandia National Laboratories (SNL). SPM provides an analytical basis for supporting programmatic decisions for the Waste Isolation Pilot Plant (WIPP) to meet selected portions of the applicable US EPA long-term performance regulations. The first iteration of SPM (SPM-1), the prototype for SPM< was completed in 1994. It served as a benchmark and a test bed for developing the tools needed for the second iteration of SPM (SPM-2). SPM-2, completed in 1995, is intended for programmatic decision making. This is Volume II of the three-volume final report of the secondmore » iteration of the SPM. It describes the technical input and model implementation for SPM-2, and presents the SPM-2 technical baseline and the activities, activity outcomes, outcome probabilities, and the input parameters for SPM-2 analysis.« less

Computer-aided diagnosis of prostate cancer using a deep convolutional neural network from multiparametric MRI.

PubMed

Song, Yang; Zhang, Yu-Dong; Yan, Xu; Liu, Hui; Zhou, Minxiong; Hu, Bingwen; Yang, Guang

2018-04-16

Deep learning is the most promising methodology for automatic computer-aided diagnosis of prostate cancer (PCa) with multiparametric MRI (mp-MRI). To develop an automatic approach based on deep convolutional neural network (DCNN) to classify PCa and noncancerous tissues (NC) with mp-MRI. Retrospective. In all, 195 patients with localized PCa were collected from a PROSTATEx database. In total, 159/17/19 patients with 444/48/55 observations (215/23/23 PCas and 229/25/32 NCs) were randomly selected for training/validation/testing, respectively. T 2 -weighted, diffusion-weighted, and apparent diffusion coefficient images. A radiologist manually labeled the regions of interest of PCas and NCs and estimated the Prostate Imaging Reporting and Data System (PI-RADS) scores for each region. Inspired by VGG-Net, we designed a patch-based DCNN model to distinguish between PCa and NCs based on a combination of mp-MRI data. Additionally, an enhanced prediction method was used to improve the prediction accuracy. The performance of DCNN prediction was tested using a receiver operating characteristic (ROC) curve, and the area under the ROC curve (AUC), sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were calculated. Moreover, the predicted result was compared with the PI-RADS score to evaluate its clinical value using decision curve analysis. Two-sided Wilcoxon signed-rank test with statistical significance set at 0.05. The DCNN produced excellent diagnostic performance in distinguishing between PCa and NC for testing datasets with an AUC of 0.944 (95% confidence interval: 0.876-0.994), sensitivity of 87.0%, specificity of 90.6%, PPV of 87.0%, and NPV of 90.6%. The decision curve analysis revealed that the joint model of PI-RADS and DCNN provided additional net benefits compared with the DCNN model and the PI-RADS scheme. The proposed DCNN-based model with enhanced prediction yielded high performance in statistical analysis, suggesting that DCNN could be used in computer-aided diagnosis (CAD) for PCa classification. 3 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018. © 2018 International Society for Magnetic Resonance in Medicine.

Programming Design Guide for Computer Implementation of Job Aid for Selecting Instructional Setting. Final Report.

ERIC Educational Resources Information Center

Schulz, Russel E.; And Others

This Programming Design Guide (PDG) was developed to permit the offline Job Aid for Selecting Instructional Setting, which is one of 13 job aids presently available for use with the Instructional Systems Development (ISD) model, to be available in an inquiry-type, online version. It is intended to provide computer programmers with all of the…

[An expert system of aiding decision making in breast pathology connected to a clinical data base].

PubMed

Brunet, M; Durrleman, S; Ferber, J; Ganascia, J G; Hacene, K; Hirt, F; Jouniaux, F; Meeus, L

1987-01-01

The René Huguenin Cancer Center holds a medical file for each patient which is intended to store and process medical data. Since 1970, we introduced computerization: a development plan was elaborated and simultaneously a statistical software (Clotilde--GSI/CFRO) was selected. Thus, we now have access to a large database, structured according to medical rationale, and utilizable with methods of artificial intelligence towards three objectives: improved data acquisition, decision making and exploitation. The first application was to breast pathology, which represents one of the Center's primary activities. The structure of the data concerning patients is by all criteria part of the medical knowledge. This information needs to be presented as well as processed with a suitable language. To this end, we chose a language-oriented object, Mering II, usable with Apple and IBM 4 micro-computers. This project has already allowed to work out an operational model.

Predicting adverse hemodynamic events in critically ill patients.

PubMed

Yoon, Joo H; Pinsky, Michael R

2018-06-01

The art of predicting future hemodynamic instability in the critically ill has rapidly become a science with the advent of advanced analytical processed based on computer-driven machine learning techniques. How these methods have progressed beyond severity scoring systems to interface with decision-support is summarized. Data mining of large multidimensional clinical time-series databases using a variety of machine learning tools has led to our ability to identify alert artifact and filter it from bedside alarms, display real-time risk stratification at the bedside to aid in clinical decision-making and predict the subsequent development of cardiorespiratory insufficiency hours before these events occur. This fast evolving filed is primarily limited by linkage of high-quality granular to physiologic rationale across heterogeneous clinical care domains. Using advanced analytic tools to glean knowledge from clinical data streams is rapidly becoming a reality whose clinical impact potential is great.

Automation Bias: Decision Making and Performance in High-Tech Cockpits

NASA Technical Reports Server (NTRS)

Mosier, Kathleen L.; Skitka, Linda J.; Heers, Susan; Burdick, Mark; Rosekind, Mark R. (Technical Monitor)

1997-01-01

Automated aids and decision support tools are rapidly becoming indispensible tools in high-technology cockpits, and are assuming increasing control of "cognitive" flight tasks, such as calculating fuel-efficient routes, navigating, or detecting and diagnosing system malfunctions and abnormalities. This study was designed to investigate "automation bias," a recently documented factor in the use of automated aids and decision support systems. The term refers to omission and commission errors resulting from the use of automated cues as a heuristic replacement for vigilant information seeking and processing. Glass-cockpit pilots flew flight scenarios involving automation "events," or opportunities for automation-related omission and commission errors. Pilots who perceived themselves as "accountable" for their performance and strategies of interaction with the automation were more likely to double-check automated functioning against other cues, and less likely to commit errors. Pilots were also likely to erroneously "remember" the presence of expected cues when describing their decision-making processes.

Topics in programmable automation. [for materials handling, inspection, and assembly

NASA Technical Reports Server (NTRS)

Rosen, C. A.

1975-01-01

Topics explored in the development of integrated programmable automation systems include: numerically controlled and computer controlled machining; machine intelligence and the emulation of human-like capabilities; large scale semiconductor integration technology applications; and sensor technology for asynchronous local computation without burdening the executive minicomputer which controls the whole system. The role and development of training aids, and the potential application of these aids to augmented teleoperator systems are discussed.

A System Engineering Study and Concept Development for a Humanitarian Aid and Disaster Relief Operations Management Platform

DTIC Science & Technology

2016-09-01

and network. The computing and network hardware are identified and include routers, servers, firewalls, laptops , backup hard drives, smart phones...deployable hardware units will be necessary. This includes the use of ruggedized laptops and desktop computers , a projector system, communications system...ENGINEERING STUDY AND CONCEPT DEVELOPMENT FOR A HUMANITARIAN AID AND DISASTER RELIEF OPERATIONS MANAGEMENT PLATFORM by Julie A. Reed September

Denver RTD's computer aided dispatch/automatic vehicle location system : the human factors consequences

DOT National Transportation Integrated Search

1999-09-01

This report documents what happened to employees' work procedures when their employer when their employer installed Computer Aided Disptach/Automatic Vehicle Locator (CAD/AVL) technology to provide real-time surveillance of vehicles and to upgrade ra...

Ambiguity resolution for satellite Doppler positioning systems

NASA Technical Reports Server (NTRS)

Argentiero, P.; Marini, J.

1979-01-01

The implementation of satellite-based Doppler positioning systems frequently requires the recovery of transmitter position from a single pass of Doppler data. The least-squares approach to the problem yields conjugate solutions on either side of the satellite subtrack. It is important to develop a procedure for choosing the proper solution which is correct in a high percentage of cases. A test for ambiguity resolution which is the most powerful in the sense that it maximizes the probability of a correct decision is derived. When systematic error sources are properly included in the least-squares reduction process to yield an optimal solution the test reduces to choosing the solution which provides the smaller valuation of the least-squares loss function. When systematic error sources are ignored in the least-squares reduction, the most powerful test is a quadratic form comparison with the weighting matrix of the quadratic form obtained by computing the pseudoinverse of a reduced-rank square matrix. A formula for computing the power of the most powerful test is provided. Numerical examples are included in which the power of the test is computed for situations that are relevant to the design of a satellite-aided search and rescue system.

The Influence of decision aids on prostate cancer screening preferences: A randomized survey study.

PubMed

Weiner, Adam B; Tsai, Kyle P; Keeter, Mary-Kate; Victorson, David E; Schaeffer, Edward M; Catalona, William J; Kundu, Shilajit D

2018-05-28

Shared decision making is recommended regarding prostate cancer screening. Decision aids may facilitate this process; however, the impact of decision aids on screening preferences is poorly understood. In an online survey, a national sample of adults were randomized to one of six different professional societies' online decision aids. We compared pre- and post-decision aid responses. The primary outcome was change in participant likelihood to undergo or recommend prostate cancer screening on a scale of 1 (unlikely) to 100 (extremely likely). Secondary outcomes included change in participant comfort with prostate cancer screening based on the average of six, five-point Likert-scale questions. Median age was 53 years for the 1,336 participants, and 50% were men. Randomized groups did not differ significantly by race, age, gender, income, marital status, or education level. Likelihood to undergo or recommend prostate cancer screening decreased from 83 to 78 following decision aid exposure (p<0.001; Figure). Reviewing the decision aid from the Centers for Disease Control or American Academy of Family Physicians did not alter likelihood (both p>0.2), while the decision aid from the United States Preventive Services Task Force was associated with the largest decrease in screening preference (-16.0, p<0.001). Participants reported increased comfort with the decision-making process for prostate cancer screening from 3.5 to 4.1 (out of 5, p<0.001) following exposure to a decision aid. Exposure to a decision aid decreased participant likelihood to undergo or recommend prostate cancer screening and increased comfort with the screening process. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Assessing the usefulness and acceptability of a low health literacy online decision aid about reproductive choices for younger women with breast cancer: the aLLIAnCE pilot study protocol.

PubMed

Peate, Michelle; Smith, Sian Karen; Pye, Victoria; Hucker, Alice; Stern, Catharyn; Stafford, Lesley; Oakman, Catherine; Chin-Lenn, Laura; Shanahan, Kerry; Ratnayake Gamage, Nipuni; Hickey, Martha

2017-01-01

Young women diagnosed with breast cancer may be confronted by many difficult decisions, especially around fertility preservation prior to commencing cancer treatment. The information to be conveyed is complex, and it may be difficult to weigh up the risks and benefits of the different fertility preservation options available. This complexity is compounded by the widespread low levels of literacy and health literacy in Australia, which may result in greater difficulties in understanding available health information and in decision-making. A working group of experts have developed a fertility-related online decision aid for a low health literacy population, guided by health literacy principles. The decision aid will be pilot tested with 30 women diagnosed with early breast cancer between 5 years and 6 months previously. To be eligible, at the time of diagnosis, women must be between 18 and 40 years (inclusive), pre-menopausal, have no history of metastatic disease, have not completed their families, be able to give informed consent and have low health literacy. Participants will be asked to reflect back to the time in which they were diagnosed. Participants will complete a questionnaire before and after reviewing the decision aid to determine the feasibility, use and acceptability of the decision aid. The decision aid will be modified accordingly. Participants may also choose to review a previously developed (high literacy) decision aid and provide feedback in comparison to the low health literacy decision aid. This project represents the first study to develop an online fertility decision aid developed from low health literacy models in the context of breast cancer. It is anticipated that the low health literacy decision aid will be useful and acceptable to young women with low health literacy who have been diagnosed with breast cancer and that it will be preferred over the high literacy decision aid. ACTRN12615001364561p.

Effectiveness of an Electronic Performance Support System on Computer Ethics and Ethical Decision-Making Education

ERIC Educational Resources Information Center

Kert, Serhat Bahadir; Uz, Cigdem; Gecu, Zeynep

2014-01-01

This study examined the effectiveness of an electronic performance support system (EPSS) on computer ethics education and the ethical decision-making processes. There were five different phases to this ten month study: (1) Writing computer ethics scenarios, (2) Designing a decision-making framework (3) Developing EPSS software (4) Using EPSS in a…

Decision aids for randomised controlled trials: a qualitative exploration of stakeholders’ views

PubMed Central

Gillies, Katie; Skea, Zoë C; Campbell, Marion K

2014-01-01

Objectives To explore stakeholders’ perceptions of decision aids designed to support the informed consent decision-making process for randomised controlled trials. Design Qualitative semistructured interviews. Participants were provided with prototype trial decision aids in advance to stimulate discussion. Interviews were analysed using an established interpretive approach. Participants 23 stakeholders: Trial Managers (n=5); Research Nurses (n=5); Ethics Committee Chairs (n=5); patients (n=4) and Clinical Principal Investigators (n=4). Setting Embedded within two ongoing randomised controlled trials. All interviews conducted with UK-based participants. Results Certain key aspects (eg, values clarification exercises, presentation of probabilities, experiences of others and balance of options) in the prototype decision aids were perceived by all stakeholders as having a significant advantage (over existing patient information leaflets) in terms of supporting well informed appropriate decisions. However, there were some important differences between the stakeholder groups on specific content (eg, language used in the section on positive and negative features of taking part in a trial and the overall length of the trial decision aids). Generally the stakeholders believed trial decision aids have the potential to better engage potential participants in the decision-making process and allow them to make more personally relevant decisions about their participation. Conclusions Compared to existing patient information leaflets, stakeholders perceived decision aids for trial participation to have the potential to promote a more ‘informed’ decision-making process. Further efforts to develop, refine and formally evaluate trial decision aids should be explored. PMID:25138811

Decision technology.

PubMed

Edwards, W; Fasolo, B

2001-01-01

This review is about decision technology-the rules and tools that help us make wiser decisions. First, we review the three rules that are at the heart of most traditional decision technology-multi-attribute utility, Bayes' theorem, and subjective expected utility maximization. Since the inception of decision research, these rules have prescribed how we should infer values and probabilities and how we should combine them to make better decisions. We suggest how to make best use of all three rules in a comprehensive 19-step model. The remainder of the review explores recently developed tools of decision technology. It examines the characteristics and problems of decision-facilitating sites on the World Wide Web. Such sites now provide anyone who can use a personal computer with access to very sophisticated decision-aiding tools structured mainly to facilitate consumer decision making. It seems likely that the Web will be the mode by means of which decision tools will be distributed to lay users. But methods for doing such apparently simple things as winnowing 3000 options down to a more reasonable number, like 10, contain traps for unwary decision technologists. The review briefly examines Bayes nets and influence diagrams-judgment and decision-making tools that are available as computer programs. It very briefly summarizes the state of the art of eliciting probabilities from experts. It concludes that decision tools will be as important in the 21st century as spreadsheets were in the 20th.

A Computer-Aided Diagnosis System for Breast Cancer Combining Digital Mammography and Genomics

DTIC Science & Technology

2006-05-01

Huang, "Breast cancer diagnosis using self-organizing map for sonography." Ultrasound Med. Biol. 26, 405 (2000). 20 K. Horsch, M.L. Giger, L.A. Venta ...L.A. Venta , "Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography." Acad Radiol 11, 272 (2004). 22 W. Chen...418. 27. Horsch K, Giger ML, Vyborny CJ, Venta LA. Performance of computer-aided diagnosis in the interpretation of lesions on breast sonography

A computer-aided design system geared toward conceptual design in a research environment. [for hypersonic vehicles

NASA Technical Reports Server (NTRS)

STACK S. H.

1981-01-01

A computer-aided design system has recently been developed specifically for the small research group environment. The system is implemented on a Prime 400 minicomputer linked with a CDC 6600 computer. The goal was to assign the minicomputer specific tasks, such as data input and graphics, thereby reserving the large mainframe computer for time-consuming analysis codes. The basic structure of the design system consists of GEMPAK, a computer code that generates detailed configuration geometry from a minimum of input; interface programs that reformat GEMPAK geometry for input to the analysis codes; and utility programs that simplify computer access and data interpretation. The working system has had a large positive impact on the quantity and quality of research performed by the originating group. This paper describes the system, the major factors that contributed to its particular form, and presents examples of its application.

Strategic Computing Computer Vision: Taking Image Understanding To The Next Plateau

NASA Astrophysics Data System (ADS)

Simpson, R. L., Jr.

1987-06-01

The overall objective of the Strategic Computing (SC) Program of the Defense Advanced Research Projects Agency (DARPA) is to develop and demonstrate a new generation of machine intelligence technology which can form the basis for more capable military systems in the future and also maintain a position of world leadership for the US in computer technology. Begun in 1983, SC represents a focused research strategy for accelerating the evolution of new technology and its rapid prototyping in realistic military contexts. Among the very ambitious demonstration prototypes being developed within the SC Program are: 1) the Pilot's Associate which will aid the pilot in route planning, aerial target prioritization, evasion of missile threats, and aircraft emergency safety procedures during flight; 2) two battle management projects one for the for the Army, which is just getting started, called the AirLand Battle Management program (ALBM) which will use knowledge-based systems technology to assist in the generation and evaluation of tactical options and plans at the Corps level; 3) the other more established program for the Navy is the Fleet Command Center Battle Management Program (FCCBIVIP) at Pearl Harbor. The FCCBMP is employing knowledge-based systems and natural language technology in a evolutionary testbed situated in an operational command center to demonstrate and evaluate intelligent decision-aids which can assist in the evaluation of fleet readiness and explore alternatives during contingencies; and 4) the Autonomous Land Vehicle (ALV) which integrates in a major robotic testbed the technologies for dynamic image understanding, knowledge-based route planning with replanning during execution, hosted on new advanced parallel architectures. The goal of the Strategic Computing computer vision technology base (SCVision) is to develop generic technology that will enable the construction of complete, robust, high performance image understanding systems to support a wide range of DoD applications. Possible applications include autonomous vehicle navigation, photointerpretation, smart weapons, and robotic manipulation. This paper provides an overview of the technical and program management plans being used in evolving this critical national technology.

Combining principles of Cognitive Load Theory and diagnostic error analysis for designing job aids: Effects on motivation and diagnostic performance in a process control task.

PubMed

Kluge, Annette; Grauel, Britta; Burkolter, Dina

2013-03-01

Two studies are presented in which the design of a procedural aid and the impact of an additional decision aid for process control were assessed. In Study 1, a procedural aid was developed that avoids imposing unnecessary extraneous cognitive load on novices when controlling a complex technical system. This newly designed procedural aid positively affected germane load, attention, satisfaction, motivation, knowledge acquisition and diagnostic speed for novel faults. In Study 2, the effect of a decision aid for use before the procedural aid was investigated, which was developed based on an analysis of diagnostic errors committed in Study 1. Results showed that novices were able to diagnose both novel faults and practised faults, and were even faster at diagnosing novel faults. This research contributes to the question of how to optimally support novices in dealing with technical faults in process control. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Psychological Issues in Online Adaptive Task Allocation

NASA Technical Reports Server (NTRS)

Morris, N. M.; Rouse, W. B.; Ward, S. L.; Frey, P. R.

1984-01-01

Adaptive aiding is an idea that offers potential for improvement over many current approaches to aiding in human-computer systems. The expected return of tailoring the system to fit the user could be in the form of improved system performance and/or increased user satisfaction. Issues such as the manner in which information is shared between human and computer, the appropriate division of labor between them, and the level of autonomy of the aid are explored. A simulated visual search task was developed. Subjects are required to identify targets in a moving display while performing a compensatory sub-critical tracking task. By manipulating characteristics of the situation such as imposed task-related workload and effort required to communicate with the computer, it is possible to create conditions in which interaction with the computer would be more or less desirable. The results of preliminary research using this experimental scenario are presented, and future directions for this research effort are discussed.

Soil, water, and vegetation conditions in south Texas

NASA Technical Reports Server (NTRS)

Wiegand, C. L.; Gausman, H. W.; Leamer, R. W.; Richardson, A. J.; Everitt, J. H.; Gerbermann, A. H. (Principal Investigator)

1976-01-01

The author has identified the following significant results. Software development for a computer-aided crop and soil survey system is nearing completion. Computer-aided variety classification accuracies using LANDSAT-1 MSS data for a 600 hectare citrus farm were 83% for Redblush grapefruit and 91% for oranges. These accuracies indicate that there is good potential for computer-aided inventories of grapefruit and orange citrus orchards with LANDSAT-type MSS data. Mean digital values of clouds differed statistically from those for crop, soil, and water entities, and those for cloud shadows were enough lower than sunlit crop and soil to be distinguishable. The standard errors of estimate for the calibration of computer compatible tape coordinate system (pixel and record) to earth coordinate system (longitude and latitude) for 6 LANDSAT scenes ranged from 0.72 to 1.50 pixels and from 0.58 to 1.75 records.

A two-view ultrasound CAD system for spina bifida detection using Zernike features

NASA Astrophysics Data System (ADS)

Konur, Umut; Gürgen, Fikret; Varol, Füsun

2011-03-01

In this work, we address a very specific CAD (Computer Aided Detection/Diagnosis) problem and try to detect one of the relatively common birth defects - spina bifida, in the prenatal period. To do this, fetal ultrasound images are used as the input imaging modality, which is the most convenient so far. Our approach is to decide using two particular types of views of the fetal neural tube. Transcerebellar head (i.e. brain) and transverse (axial) spine images are processed to extract features which are then used to classify healthy (normal), suspicious (probably defective) and non-decidable cases. Decisions raised by two independent classifiers may be individually treated, or if desired and data related to both modalities are available, those decisions can be combined to keep matters more secure. Even more security can be attained by using more than two modalities and base the final decision on all those potential classifiers. Our current system relies on feature extraction from images for cases (for particular patients). The first step is image preprocessing and segmentation to get rid of useless image pixels and represent the input in a more compact domain, which is hopefully more representative for good classification performance. Next, a particular type of feature extraction, which uses Zernike moments computed on either B/W or gray-scale image segments, is performed. The aim here is to obtain values for indicative markers that signal the presence of spina bifida. Markers differ depending on the image modality being used. Either shape or texture information captured by moments may propose useful features. Finally, SVM is used to train classifiers to be used as decision makers. Our experimental results show that a promising CAD system can be actualized for the specific purpose. On the other hand, the performance of such a system would highly depend on the qualities of image preprocessing, segmentation, feature extraction and comprehensiveness of image data.

Decision Aid for Cigarette Smokers Scheduled for Elective Surgery.

PubMed

Warner, David O; LeBlanc, Annie; Kadimpati, Sandeep; Vickers, Kristin S; Shi, Yu; Montori, Victor M

2015-07-01

Decision aids can increase patient involvement in decision-making about health care. The study goal was to develop and test a decision aid for use by clinicians in discussion options for changing smoking behavior before and after elective surgery. In formative work, a decision aid was designed to facilitate patient-clinician discussion regarding three options: continue smoking, attempt a period of temporary abstinence, and attempt to quit smoking for good. A randomized, two-group pilot study was then conducted in smokers evaluated in preparation for elective surgery in a preoperative clinic to test the hypothesis that the decision aid would improve measures of decisional quality compared with usual care. The final decision aid consisted of three laminated cards. The front of each card included a colorful graphic describing each choice; the reverse including two to three pros and cons for each decision, a simple graphic illustrating the effects of smoking on the body, and a motivational phrase. In the randomized trial of 130 patients, the decision aid significantly (P < 0.05) improved measures of decisional quality and patient involvement in decision making (Cohen's d effect sizes of 0.76 and 1.20 for the Decisional Conflict Scale and Observing PatienT involvement In decisiON-making scale, respectively). However, the decision aid did not affect any aspect of perioperative smoking behavior, including the distribution of or adherence to choices. Although the use of a decision aid to facilitate clinician-patient discussions regarding tobacco use around the time of surgery substantially improved measures of decisional quality, it alone did not change perioperative tobacco use behavior.

Translating Evidence to Facilitate Shared Decision Making: Development and Usability of a Consult Decision Aid Prototype.

PubMed

Stacey, Dawn; Légaré, France; Lyddiatt, Anne; Giguere, Anik M C; Yoganathan, Manosila; Saarimaki, Anton; Pardo, Jordi Pardo; Rader, Tamara; Tugwell, Peter

2016-12-01

The purpose of this study was to translate evidence from Cochrane Reviews into a format that can be used to facilitate shared decision making during the consultation, namely patient decision aids. A systematic development process (a) established a stakeholder committee; (b) developed a prototype according to the International Patient Decision Aid Standards; (c) applied the prototype to a Cochrane Review and used an interview-guided survey to evaluate acceptability/usability; (d) created 12 consult decision aids; and (e) used a Delphi process to reach consensus on considerations for creating a consult decision aid. The 1-page prototype includes (a) a title specifying the decision; (b) information on the health condition, options, benefits/harms with probabilities; (c) an explicit values clarification exercise; and (d) questions to screen for decisional conflict. Hyperlinks provide additional information on definitions, probabilities presented graphically, and references. Fourteen Cochrane Consumer Network members and Cochrane Editorial Unit staff participated. Thirteen reported that it would help patient/clinician discussions and were willing to use and/or recommend it. Seven indicated the right amount of information, six not enough, and one too much. Changes to the prototype were more links to definitions, more white space, and details on GRADE evidence ratings. Creating 12 consult decision aids took about 4 h each. We identified ten considerations when selecting Cochrane Reviews for creating consult decision aids. Using a systematic process, we developed a consult decision aid prototype to be populated with evidence from Cochrane Reviews. It was acceptable and easy to apply. Future studies will evaluate implementation of consult decision aids.

Development of a decision aid for children faced with the decision to undergo dental treatment with sedation or general anaesthesia.

PubMed

Hulin, Joe; Baker, Sarah R; Marshman, Zoe; Albadri, Sondos; Rodd, Helen D

2017-09-01

Decision aids are tools used to help individuals faced with difficult healthcare decisions. They help patients further understand the treatment options available and encourage the sharing of information between patients and clinicians. To develop a decision aid for young patients faced with the decision to undergo dental treatment with inhalation sedation, intravenous sedation, or general anaesthesia (GA). Qualitative interviews with dental patients (aged 10-16 years), and their parents/guardians were used to inform the content of a draft decision aid. Following further revisions, a pilot evaluation of the decision aid was conducted. Patients referred for dental treatment with sedation or GA were recruited from a UK dental hospital. Patients (n = 15) and parents/guardians (n = 13) assigned to the intervention group received the decision aid and routine clinical counselling, whereas patients (n = 17) and parents/guardians (n = 13) in the control group only received routine clinical counselling. Participants completed measures of knowledge, decisional conflict, and dental anxiety. Knowledge scores were significantly higher for participants who received the decision aid when compared to standard care. There were no other significant differences between groups. A decision aid was successfully developed, and initial findings suggest such tools could be beneficial to dental sedation or GA patients and their parents/guardians. Further research is required on the use of such tools in primary care settings, with particular attention to the impact of the decision aid on attendance and completion rates of treatment. © 2016 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Deep-reasoning fault diagnosis - An aid and a model

NASA Technical Reports Server (NTRS)

Yoon, Wan Chul; Hammer, John M.

1988-01-01

The design and evaluation are presented for the knowledge-based assistance of a human operator who must diagnose a novel fault in a dynamic, physical system. A computer aid based on a qualitative model of the system was built to help the operators overcome some of their cognitive limitations. This aid differs from most expert systems in that it operates at several levels of interaction that are believed to be more suitable for deep reasoning. Four aiding approaches, each of which provided unique information to the operator, were evaluated. The aiding features were designed to help the human's casual reasoning about the system in predicting normal system behavior (N aiding), integrating observations into actual system behavior (O aiding), finding discrepancies between the two (O-N aiding), or finding discrepancies between observed behavior and hypothetical behavior (O-HN aiding). Human diagnostic performance was found to improve by almost a factor of two with O aiding and O-N aiding.

Shared decision-making and decision support: their role in obstetrics and gynecology.

PubMed

Tucker Edmonds, Brownsyne

2014-12-01

To discuss the role for shared decision-making in obstetrics/gynecology and to review evidence on the impact of decision aids on reproductive health decision-making. Among the 155 studies included in a 2014 Cochrane review of decision aids, 31 (29%) addressed reproductive health decisions. Although the majority did not show evidence of an effect on treatment choice, there was a greater uptake of mammography in selected groups of women exposed to decision aids compared with usual care; and a statistically significant reduction in the uptake of hormone replacement therapy among detailed decision aid users compared with simple decision aid users. Studies also found an effect on patient-centered outcomes of care, such as medication adherence, quality-of-life measures, and anxiety scores. In maternity care, only decision analysis tools affected final treatment choice, and patient-directed aids yielded no difference in planned mode of birth after cesarean. There is untapped potential for obstetricians/gynecologists to optimize decision support for reproductive health decisions. Given the limited evidence-base guiding practice, the preference-sensitive nature of reproductive health decisions, and the increase in policy efforts and financial incentives to optimize patients' satisfaction, it is increasingly important for obstetricians/gynecologists to appreciate the role of shared decision-making and decision support in providing patient-centered reproductive healthcare.

A Computer-Aided Telephone System to Enable Five Persons with Alzheimer's Disease to Make Phone Calls Independently

ERIC Educational Resources Information Center

Perilli, Viviana; Lancioni, Giulio E.; Laporta, Dominga; Paparella, Adele; Caffo, Alessandro O.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Oliva, Doretta

2013-01-01

This study extended the assessment of a computer-aided telephone system to enable five patients with a diagnosis of Alzheimer's disease to make phone calls independently. The patients were divided into two groups and exposed to intervention according to a non-concurrent multiple baseline design across groups. All patients started with baseline in…

Data Management Standards in Computer-aided Acquisition and Logistic Support (CALS)

NASA Technical Reports Server (NTRS)

Jefferson, David K.

1990-01-01

Viewgraphs and discussion on data management standards in computer-aided acquisition and logistic support (CALS) are presented. CALS is intended to reduce cost, increase quality, and improve timeliness of weapon system acquisition and support by greatly improving the flow of technical information. The phase 2 standards, industrial environment, are discussed. The information resource dictionary system (IRDS) is described.

Investigation of air transportation technology at Princeton University, 1990-1991

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1991-01-01

The Air Transportation Technology Program at Princeton University is a program that emphasizes graduate and undergraduate student research. The program proceeded along six avenues during the past year: microburst hazards to aircraft, intelligent failure tolerant control, computer-aided heuristics for piloted flight, stochastic robustness of flight control systems, neural networks for flight control, and computer-aided control system design.

Computer-Aided Air-Traffic Control In The Terminal Area

NASA Technical Reports Server (NTRS)

Erzberger, Heinz

1995-01-01

Developmental computer-aided system for automated management and control of arrival traffic at large airport includes three integrated subsystems. One subsystem, called Traffic Management Advisor, another subsystem, called Descent Advisor, and third subsystem, called Final Approach Spacing Tool. Data base that includes current wind measurements and mathematical models of performances of types of aircraft contributes to effective operation of system.

Implementation and Evaluation of Computer-Aided Mandarin Phonemes Training System for Hearing-Impaired Students

ERIC Educational Resources Information Center

Yang, Hui-Jen; Lay, Yun-Long

2005-01-01

A computer-aided Mandarin phonemes training (CAMPT) system was developed and evaluated for training hearing-impaired students in their pronunciation of Mandarin phonemes. Deaf or hearing-impaired people have difficulty hearing their own voice, hence most of them cannot learn how to speak. Phonemes are the basis for learning to read and speak in…

Two Adults with Multiple Disabilities Use a Computer-Aided Telephone System to Make Phone Calls Independently

ERIC Educational Resources Information Center

Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Oliva, Doretta; Alberti, Gloria; Lang, Russell

2011-01-01

This study extended the assessment of a newly developed computer-aided telephone system with two participants (adults) who presented with blindness or severe visual impairment and motor or motor and intellectual disabilities. For each participant, the study was carried out according to an ABAB design, in which the A represented baseline phases and…

Analytical Procedures for Testability.

DTIC Science & Technology

1983-01-01

Beat Internal Classifications", AD: A018516. "A System of Computer Aided Diagnosis with Blood Serum Chemistry Tests and Bayesian Statistics", AD: 786284...6 LIST OF TALS .. 1. Truth Table ......................................... 49 2. Covering Problem .............................. 93 3. Primary and...quential classification procedure in a coronary care ward is evaluated. In the toxicology field "A System of Computer Aided Diagnosis with Blood Serum

A Language Translator for a Computer Aided Rapid Prototyping System.

DTIC Science & Technology

1988-03-01

PROBLEM ................... S B. THE TRADITIONAL "WATERFALL LIFE CYCLE" .. ............... 14 C. RAPID PROTOTYPING...feature of everyday life for almost the entire industrialized world. Few governments or businesses function without the aid of computer systems. Com...engineering. B. TIE TRADITIONAL "WATERFALL LIFE CYCLE" I. Characteristics The traditional method of software engineering is the "waterfall life cycle

Working with interpreters: The challenges of introducing Option Grid patient decision aids.

PubMed

Wood, Fiona; Phillips, Katie; Edwards, Adrian; Elwyn, Glyn

2017-03-01

We aimed to observe how an Option Grid™ decision aid for clinical encounters might be used where an interpreter is present, and to assess the impact of its use on shared decision making. Data were available from three clinical consultations between patient, clinician (a physiotherapist), and interpreter about knee osteoarthritis. Clinicians were trained in the use of an Option Grid decision aid and the tool was used. Consultations were audio-recorded, transcribed, and translated by independent translators into English. Analysis revealed the difficulties with introducing a written decision aid into an interpreted consultation. The extra discussion needed between the clinician and interpreter around the principles and purpose of shared decision making and instructions regarding the Option Grid decision aid proved challenging and difficult to manage. Discussion of treatment options while using an Option Grid decision aid was predominantly done between clinician and interpreter. The patient appeared to have little involvement in discussion of treatment options. Patients were not active participants within the discussion. Further work needs to be done on how shared decision making can be achieved within interpreted consultations. Option Grid decision aids are not being used as intended in interpreted consultations. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Usability and utility evaluation of the web-based "Should I Start Insulin?" patient decision aid for patients with type 2 diabetes among older people.

PubMed

Lee, Yew Kong; Lee, Ping Yein; Ng, Chirk Jenn; Teo, Chin Hai; Abu Bakar, Ahmad Ihsan; Abdullah, Khatijah Lim; Khoo, Ee Ming; Hanafi, Nik Sherina; Low, Wah Yun; Chiew, Thiam Kian

2018-01-01

This study aimed to evaluate the usability (ease of use) and utility (impact on user's decision-making process) of a web-based patient decision aid (PDA) among older-age users. A pragmatic, qualitative research design was used. We recruited patients with type 2 diabetes who were at the point of making a decision about starting insulin from a tertiary teaching hospital in Malaysia in 2014. Computer screen recording software was used to record the website browsing session and in-depth interviews were conducted while playing back the website recording. The interviews were analyzed using the framework approach to identify usability and utility issues. Three cycles of iteration were conducted until no more major issues emerged. Thirteen patients participated: median age 65 years old, 10 men, and nine had secondary education/diploma, four were graduates/had postgraduate degree. Four usability issues were identified (navigation between pages and sections, a layout with open display, simple language, and equipment preferences). For utility, participants commented that the website influenced their decision about insulin in three ways: it had provided information about insulin, it helped them deliberate choices using the option-attribute matrix, and it allowed them to involve others in their decision making by sharing the PDA summary printout.

Implementation of a cystic fibrosis lung transplant referral patient decision aid in routine clinical practice: an observational study.

PubMed

Stacey, Dawn; Vandemheen, Katherine L; Hennessey, Rosamund; Gooyers, Tracy; Gaudet, Ena; Mallick, Ranjeeta; Salgado, Josette; Freitag, Andreas; Berthiaume, Yves; Brown, Neil; Aaron, Shawn D

2015-02-07

The decision to have lung transplantation as treatment for end-stage lung disease from cystic fibrosis (CF) has benefits and serious risks. Although patient decision aids are effective interventions for helping patients reach a quality decision, little is known about implementing them in clinical practice. Our study evaluated a sustainable approach for implementing a patient decision aid for adults with CF considering referral for lung transplantation. A prospective pragmatic observational study was guided by the Knowledge-to-Action Framework. Healthcare professionals in all 23 Canadian CF clinics were eligible. We surveyed participants regarding perceived barriers and facilitators to patient decision aid use. Interventions tailored to address modifiable identified barriers included training, access to decision aids, and conference calls. The primary outcome was >80% use of the decision aid in year 2. Of 23 adult CF clinics, 18 participated (78.2%) and 13 had healthcare professionals attend training. Baseline barriers were healthcare professionals' inadequate knowledge for supporting patients making decisions (55%), clarifying patients' values for outcomes of options (58%), and helping patients handle conflicting views of others (71%). Other barriers were lack of time (52%) and needing to change how transplantation is discussed (42%). Baseline facilitators were healthcare professionals feeling comfortable discussing bad transplantation outcomes (74%), agreeing the decision aid would be easy to experiment with (71%) and use in the CF clinic (87%), and agreeing that using the decision aid would not require reorganization of the CF clinic (90%). After implementing the decision aid with interventions tailored to the barriers, decision aid use increased from 29% at baseline to 85% during year 1 and 92% in year 2 (p < 0.001). Compared to baseline, more healthcare professionals at the end of the study were confident in supporting decision-making (p = 0.03) but continued to feel inadequate ability with supporting patients to handle conflicting views (p = 0.01). Most Canadian CF clinics agreed to participate in the study. Interventions were used to target identified modifiable barriers to using the patient decision aid in routine CF clinical practice. CF clinics reported using it with almost all patients in the second year.

Space Spurred Computer Graphics

NASA Technical Reports Server (NTRS)

1983-01-01

Dicomed Corporation was asked by NASA in the early 1970s to develop processing capabilities for recording images sent from Mars by Viking spacecraft. The company produced a film recorder which increased the intensity levels and the capability for color recording. This development led to a strong technology base resulting in sophisticated computer graphics equipment. Dicomed systems are used to record CAD (computer aided design) and CAM (computer aided manufacturing) equipment, to update maps and produce computer generated animation.

A Model of Submarine Emergency Decisionmaking and Decision Aiding

DTIC Science & Technology

1986-10-01

Rationality," Ajiiigm 0 Vl1, No.6, pp. 703-709. [9] Levis, A.H. arid K.L. Boettcher (1983j). "Decisionmaking Organizacions with Acyclical Informafion...and Decision Systems, MIT, Cambridge, MA.4 [18] Labak, SJ. (1985-86). Private Communication. [19] Anonymous, SSN 688 Class Ship Systems Manual , Vol. 7

A Computer-Aided Diagnosis System Using Artificial Intelligence for the Diagnosis and Characterization of Thyroid Nodules on Ultrasound: Initial Clinical Assessment.

PubMed

Choi, Young Jun; Baek, Jung Hwan; Park, Hye Sun; Shim, Woo Hyun; Kim, Tae Yong; Shong, Young Kee; Lee, Jeong Hyun

2017-04-01

An initial clinical assessment is described of a new, commercially available, computer-aided diagnosis (CAD) system using artificial intelligence (AI) for thyroid ultrasound, and its performance is evaluated in the diagnosis of malignant thyroid nodules and categorization of nodule characteristics. Patients with thyroid nodules with decisive diagnosis, whether benign or malignant, were consecutively enrolled from November 2015 to February 2016. An experienced radiologist reviewed the ultrasound image characteristics of the thyroid nodules, while another radiologist assessed the same thyroid nodules using the CAD system, providing ultrasound characteristics and a diagnosis of whether nodules were benign or malignant. The diagnostic performance and agreement of US characteristics between the experienced radiologist and the CAD system were compared. In total, 102 thyroid nodules from 89 patients were included; 59 (57.8%) were benign and 43 (42.2%) were malignant. The CAD system showed a similar sensitivity as the experienced radiologist (90.7% vs. 88.4%, p > 0.99), but a lower specificity and a lower area under the receiver operating characteristic (AUROC) curve (specificity: 74.6% vs. 94.9%, p = 0.002; AUROC: 0.83 vs. 0.92, p = 0.021). Classifications of the ultrasound characteristics (composition, orientation, echogenicity, and spongiform) between radiologist and CAD system were in substantial agreement (κ = 0.659, 0.740, 0.733, and 0.658, respectively), while the margin showed a fair agreement (κ = 0.239). The sensitivity of the CAD system using AI for malignant thyroid nodules was as good as that of the experienced radiologist, while specificity and accuracy were lower than those of the experienced radiologist. The CAD system showed an acceptable agreement with the experienced radiologist for characterization of thyroid nodules.

Computerized Decision Aids for Shared Decision Making in Serious Illness: Systematic Review.

PubMed

Staszewska, Anna; Zaki, Pearl; Lee, Joon

2017-10-06

Shared decision making (SDM) is important in achieving patient-centered care. SDM tools such as decision aids are intended to inform the patient. When used to assist in decision making between treatments, decision aids have been shown to reduce decisional conflict, increase ease of decision making, and increase modification of previous decisions. The purpose of this systematic review is to assess the impact of computerized decision aids on patient-centered outcomes related to SDM for seriously ill patients. PubMed and Scopus databases were searched to identify randomized controlled trials (RCTs) that assessed the impact of computerized decision aids on patient-centered outcomes and SDM in serious illness. Six RCTs were identified and data were extracted on study population, design, and results. Risk of bias was assessed by a modified Cochrane Risk of Bias Tool for Quality Assessment of Randomized Controlled Trials. Six RCTs tested decision tools in varying serious illnesses. Three studies compared different computerized decision aids against each other and a control. All but one study demonstrated improvement in at least one patient-centered outcome. Computerized decision tools may reduce unnecessary treatment in patients with low disease severity in comparison with informational pamphlets. Additionally, electronic health record (EHR) portals may provide the opportunity to manage care from the home for individuals affected by illness. The quality of decision aids is of great importance. Furthermore, satisfaction with the use of tools is associated with increased patient satisfaction and reduced decisional conflict. Finally, patients may benefit from computerized decision tools without the need for increased physician involvement. Most computerized decision aids improved at least one patient-centered outcome. All RCTs identified were at a High Risk of Bias or Unclear Risk of Bias. Effort should be made to improve the quality of RCTs testing SDM aids in serious illness. ©Anna Staszewska, Pearl Zaki, Joon Lee. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 06.10.2017.

Can a decision aid enable informed decisions in neonatal nursery recruitment for a fragile X newborn screening study?

PubMed

Bailey, Donald B; Bann, Carla; Bishop, Ellen; Guarda, Sonia; Barnum, Leah; Roche, Myra

2013-04-01

To determine whether a brochure based on principles of informed decision making improved attention to study materials or altered decisions made by parents invited to participate in a fragile X syndrome newborn screening study. A total of 1,323 families were invited to participate in a newborn screening study to identify infants with fragile X syndrome as well as premutation carrier infants. Of these families, 716 received the original project brochure and 607 were given a new decision aid brochure. Families were more likely to look at the new decision aid and mothers were more likely to read it completely, but the proportion of mothers who read the entire decision aid was only 14%. Families were more likely to rate the decision aid as very helpful. Consistent with informed decision making theory and research, participants receiving the decision aid brochure were less likely to agree to participate. The decision aid increased attention to and perceived helpfulness of educational information about the study, but most families did not read it completely. The study suggests that even well-designed study materials are not fully reviewed in the context of in-hospital postpartum study recruitment and may need to be accompanied by a research recruiter to obtain informed consent.

CAGI: Computer Aided Grid Interface. A work in progress

NASA Technical Reports Server (NTRS)

Soni, Bharat K.; Yu, Tzu-Yi; Vaughn, David

1992-01-01

Progress realized in the development of a Computer Aided Grid Interface (CAGI) software system in integrating CAD/CAM geometric system output and/or Interactive Graphics Exchange Standard (IGES) files, geometry manipulations associated with grid generation, and robust grid generation methodologies is presented. CAGI is being developed in a modular fashion and will offer fast, efficient and economical response to geometry/grid preparation, allowing the ability to upgrade basic geometry in a step-by-step fashion interactively and under permanent visual control along with minimizing the differences between the actual hardware surface descriptions and corresponding numerical analog. The computer code GENIE is used as a basis. The Non-Uniform Rational B-Splines (NURBS) representation of sculptured surfaces is utilized for surface grid redistribution. The computer aided analysis system, PATRAN, is adapted as a CAD/CAM system. The progress realized in NURBS surface grid generation, the development of IGES transformer, and geometry adaption using PATRAN will be presented along with their applicability to grid generation associated with rocket propulsion applications.

Computer Aided Dosimetry and Verification of Exposure to Radiation

DTIC Science & Technology

2002-06-01

Event matrix 2. Hematopoietic * Absolute blood counts * Relative blood counts 3. Dosimetry * TLD * EPDQuantitative * Radiation survey * Whole body...EI1 Defence Research and Recherche et developpement Development Canada pour la d6fense Canada DEFENCE •mI•DEFENSE Computer Aided Dosimetry and...Aided Dosimetry and Verification of Exposure to Radiation Edward Waller SAIC Canada Robert Z Stodilka Radiation Effects Group, Space Systems and

A Socioecological Model of Rape Survivors' Decisions to Aid in Case Prosecution

ERIC Educational Resources Information Center

Anders, Mary C.; Christopher, F. Scott

2011-01-01

The purpose of our study was to identify factors underlying rape survivors' post-assault prosecution decisions by testing a decision model that included the complex relations between the multiple social ecological systems within which rape survivors are embedded. We coded 440 police rape cases for characteristics of the assault and characteristics…

Simulation software: engineer processes before reengineering.

PubMed

Lepley, C J

2001-01-01

People make decisions all the time using intuition. But what happens when you are asked: "Are you sure your predictions are accurate? How much will a mistake cost? What are the risks associated with this change?" Once a new process is engineered, it is difficult to analyze what would have been different if other options had been chosen. Simulating a process can help senior clinical officers solve complex patient flow problems and avoid wasted efforts. Simulation software can give you the data you need to make decisions. The author introduces concepts, methodologies, and applications of computer aided simulation to illustrate their use in making decisions to improve workflow design.

A rule based computer aided design system

NASA Technical Reports Server (NTRS)

Premack, T.

1986-01-01

A Computer Aided Design (CAD) system is presented which supports the iterative process of design, the dimensional continuity between mating parts, and the hierarchical structure of the parts in their assembled configuration. Prolog, an interactive logic programming language, is used to represent and interpret the data base. The solid geometry representing the parts is defined in parameterized form using the swept volume method. The system is demonstrated with a design of a spring piston.

The Development of a Design Database for the Computer Aided Prototyping System

DTIC Science & Technology

1991-09-01

COMPUTER AIDED PROTOTYPING SYSTEM by Andrew Patrick Dwyer Captain, United States Marine Corps B.S., Juniata College, 1980 M.B.A. Webster University...Postgraduate School, Monterey, California, May 1990. Page-Jones, M., The Practical guide to Structured Systems Design, Yourdon Press, 1980 . Rumbaugh, J. and...United States Laboratory Command Army Research Office Attn: Dr. David Hislop P. 0. Box 12211 Research Triangle Park, NC 27709-2211 50. George Mason

Evaluation of EMERGE, a Medical Decision Making Aid for Analysis of Chest Pain

PubMed Central

Hudson, Donna L.; Cohen, Moses E.; Deedwania, Prakash C.; Watson, Patricia E.

1983-01-01

EMERGE, a rule-based medical decision making aid for analysis of chest pain in the emergency room, was evaluated using retrospective patient data. The analysis consisted of two phases. In the initial phase, patient cases were run in order to make minor modifications and adjustments in the criteria used for determination of admission. In the second phase, patient cases were analyzed to determine the effectiveness of the EMERGE system in arriving at the proper conclusion.

Situation-Assessment And Decision-Aid Production-Rule Analysis System For Nuclear Plant Monitoring And Emergency Preparedness

NASA Astrophysics Data System (ADS)

Gvillo, D.; Ragheb, M.; Parker, M.; Swartz, S.

1987-05-01

A Production-Rule Analysis System is developed for Nuclear Plant Monitoring. The signals generated by the Zion-1 Plant are considered. A Situation-Assessment and Decision-Aid capability is provided for monitoring the integrity of the Plant Radiation, the Reactor Coolant, the Fuel Clad, and the Containment Systems. A total of 41 signals are currently fed as facts to an Inference Engine functioning in the backward-chaining mode and built along the same structure as the E-Mycin system. The Goal-Tree constituting the Knowledge Base was generated using a representation in the form of Fault Trees deduced from plant procedures information. The system is constructed in support of the Data Analysis and Emergency Preparedness tasks at the Illinois Radiological Emergency Assessment Center (REAC).

Explanation and elaboration of the Standards for UNiversal reporting of patient Decision Aid Evaluations (SUNDAE) guidelines: examples of reporting SUNDAE items from patient decision aid evaluation literature

PubMed Central

Hoffman, Aubri S; Abhyankar, Purva; Sheridan, Stacey; Bekker, Hilary; LeBlanc, Annie; Levin, Carrie; Ropka, Mary; Shaffer, Victoria; Stacey, Dawn; Stalmeier, Peep; Vo, Ha; Wills, Celia; Thomson, Richard

2018-01-01

This Explanation and Elaboration (E&E) article expands on the 26 items in the Standards for UNiversal reporting of Decision Aid Evaluations guidelines. The E&E provides a rationale for each item and includes examples for how each item has been reported in published papers evaluating patient decision aids. The E&E focuses on items key to reporting studies evaluating patient decision aids and is intended to be illustrative rather than restrictive. Authors and reviewers may wish to use the E&E broadly to inform structuring of patient decision aid evaluation reports, or use it as a reference to obtain details about how to report individual checklist items. PMID:29467235

How do patients between the age of 65 and 75 use a web-based decision aid for treatment choice in localized prostate cancer?

PubMed

Schrijvers, Jessie; Vanderhaegen, Joke; Van Poppel, Hendrik; Haustermans, Karin; Van Audenhove, Chantal

2013-08-01

This study was designed to evaluate the use of a web-based decision aid by a 65plus patient group in their decision-making process for treatment of localized prostate cancer. Of particular interest was the use of technology features such as patients' statements, comparative tables, and a values clarification tool. One hundred men from the University Hospital of Leuven campus, Gasthuisberg, were invited to use the web-based decision aid in their decision-making process. Twenty-six men were excluded based on non- or limited use of the decision aid. Of the remaining 74 men, user specifications, decision aid surfing characteristics by means of web-log data, and especially the use of technology features were analyzed. Men spent on average 30 minutes on the web-based decision aid. Most time was spent on the pages with information on treatment options. These pages were also most frequently accessed. The use of the feature 'comparative tables' was the highest, followed by the 'values clarification tool'. According to age (<70 or >70 years) differences were observed for the time spent on the decision aid, the pages accessed, and the use of the technology features. Despite concerns about the usability of a web-based decision aid for elderly patients, these results indicated that the majority of 65plus persons with good internet skills use a web-based decision aid as well as its incorporated technology features. © 2013 Wiley Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

Watchful waiting or induction of labour--a matter of informed choice: identification, analysis and critical appraisal of decision aids and patient information regarding care options for women with uncomplicated singleton late and post term pregnancies: a review.

PubMed

Berger, Bettina; Schwarz, Christiane; Heusser, Peter

2015-05-07

Decision-making during pregnancy regarding different options of care can be difficult, particularly when risks of intervention versus no intervention for mother and baby are unclear. Unbiased information and support for decision making may be beneficial in these situations. The management of normal pregnancies at and beyond term is an example of such a situation. In order to determine the need to develop an evidence-based decision aid this paper searches, analyses and appraises patient decision aids and patient information leaflets regarding care options in cases of late term and post-term pregnancies, including complementary and alternative medicine (CAM). A literature search was carried out in a variety of lay and medical databases. written information related to uncomplicated singleton pregnancies and targeted at lay people. Analysis and appraisal of included material by means of quality criteria was set up based on the International Patient Decision Aid Standards accounting for evidence-basing of CAM options. Inclusion of two decision aids and eleven leaflets from four decision aids and sixteen leaflets. One decision aid met the quality criteria almost completely, the other one only insufficiently despite providing some helpful information. Only one leaflet is of good quality, but cannot substitute a decision aid. There is an urgent need for the design of an evidence-based decision aid of good quality for late-term or post-term pregnancy, particularly in German language.

Using machine learning classifiers to assist healthcare-related decisions: classification of electronic patient records.

PubMed

Pollettini, Juliana T; Panico, Sylvia R G; Daneluzzi, Julio C; Tinós, Renato; Baranauskas, José A; Macedo, Alessandra A

2012-12-01

Surveillance Levels (SLs) are categories for medical patients (used in Brazil) that represent different types of medical recommendations. SLs are defined according to risk factors and the medical and developmental history of patients. Each SL is associated with specific educational and clinical measures. The objective of the present paper was to verify computer-aided, automatic assignment of SLs. The present paper proposes a computer-aided approach for automatic recommendation of SLs. The approach is based on the classification of information from patient electronic records. For this purpose, a software architecture composed of three layers was developed. The architecture is formed by a classification layer that includes a linguistic module and machine learning classification modules. The classification layer allows for the use of different classification methods, including the use of preprocessed, normalized language data drawn from the linguistic module. We report the verification and validation of the software architecture in a Brazilian pediatric healthcare institution. The results indicate that selection of attributes can have a great effect on the performance of the system. Nonetheless, our automatic recommendation of surveillance level can still benefit from improvements in processing procedures when the linguistic module is applied prior to classification. Results from our efforts can be applied to different types of medical systems. The results of systems supported by the framework presented in this paper may be used by healthcare and governmental institutions to improve healthcare services in terms of establishing preventive measures and alerting authorities about the possibility of an epidemic.

Aid-Assisted Decision-Making and Colorectal Cancer Screening

PubMed Central

Schroy, Paul C.; Emmons, Karen M.; Peters, Ellen; Glick, Julie T.; Robinson, Patricia A.; Lydotes, Maria A.; Mylvaganam, Shamini R.; Coe, Alison M.; Chen, Clara A.; Chaisson, Christine E.; Pignone, Michael P.; Prout, Marianne N.; Davidson, Peter K.; Heeren, Timothy C.

2014-01-01

Background Shared decision-making (SDM) is a widely recommended yet unproven strategy for increasing colorectal cancer (CRC) screening uptake. Previous trials of decision aids to increase SDM and CRC screening uptake have yielded mixed results. Purpose To assess the impact of decision aid–assisted SDM on CRC screening uptake. Design RCT. Setting/participants The study was conducted at an urban, academic safety-net hospital and community health center between 2005 and 2010. Participants were asymptomatic, average-risk patients aged 50–75 years due for CRC screening. Intervention Study participants (n=825) were randomized to one of two intervention arms (decision aid plus personalized risk assessment or decision aid alone) or control arm. The interventions took place just prior to a routine office visit with their primary care providers. Main outcome measures The primary outcome was completion of a CRC screening test within 12 months of the study visit. Logistic regression was used to identify predictors of test completion and mediators of the intervention effect. Analysis was completed in 2011. Results Patients in the decision-aid group were more likely to complete a screening test than control patients (43.1% vs 34.8%; p=0.046) within 12 months of the study visit; conversely, test uptake for the decision aid and decision aid plus personalized risk assessment arms was similar (43.1% vs 37.1%; p=0.15). Assignment to the decision-aid arm (AOR 1.48; 95% CI=1.04, 2.10), black race (AOR 1.52, 95% CI=1.12, 2.06) and a preference for a patient-dominant decisionmaking approach (AOR, 1.55; 95% CI=1.02, 2.35) were independent determinants of test completion. Activation of the screening discussion and enhanced screening intentions mediated the intervention effect. Conclusions Decision aid–assisted SDM has a modest impact on CRC screening uptake. A decision aid plus personalized risk assessment tool is no more effective than a decision aid alone. PMID:23159252

Medical Decision-Making Among Adolescents with Neonatal Brachial Plexus Palsy and their Families: A Qualitative Study

PubMed Central

Squitieri, Lee; Larson, Bradley P.; Chang, Kate W-C; Yang, Lynda J-S.; Chung, Kevin C.

2016-01-01

Background Elective surgical management of neonatal brachial plexus palsy is complex, variable, and often individualized. Little is known about the medical decision-making process among adolescents with NBPP and their families faced with making complex treatment decisions. The experiences of these patients and their parents were analyzed to identify key factors in the decision-making process. Patients and Methods Eighteen adolescents with residual NBPP deficits between the ages of 10 to 17 years along with their parents were included in the present study. A qualitative research design was employed involving the use of separate one hour, in person, semi-structured interviews, which were audio recorded and transcribed. Grounded theory was applied by two independent members of the research team to identify recurrent themes and ultimately create a codebook that was then applied to the data. Results Medical decision-making among adolescents with NBPP and their families is multifaceted and individualized, comprised of both patient and system dependent factors. Four codes pertaining to the medical decision-making process were identified: 1) knowledge acquisition, 2) multidisciplinary care, 3) adolescent autonomy, and 4) patient expectations and treatment desires. Overall, parental decision-making was heavily influenced by system dependent factors, while adolescents largely based their medical decision-making on individual treatment desires to improve function and/or aesthetics. Conclusions There are many areas for improving the delivery of information and health care organization among adolescents with NBPP and their families. We recommend the development of educational interdisciplinary programs and decision aids containing evidence-based management guidelines targeted toward primary care providers and patients. We believe that a computer-based learning module may provide the best avenue to achieve maximum penetrance and convenience of information sharing. PMID:23714810

Creation of system of computer-aided design for technological objects

NASA Astrophysics Data System (ADS)

Zubkova, T. M.; Tokareva, M. A.; Sultanov, N. Z.

2018-05-01

Due to the competition in the market of process equipment, its production should be flexible, retuning to various product configurations, raw materials and productivity, depending on the current market needs. This process is not possible without CAD (computer-aided design). The formation of CAD begins with planning. Synthesizing, analyzing, evaluating, converting operations, as well as visualization and decision-making operations, can be automated. Based on formal description of the design procedures, the design route in the form of an oriented graph is constructed. The decomposition of the design process, represented by the formalized description of the design procedures, makes it possible to make an informed choice of the CAD component for the solution of the task. The object-oriented approach allows us to consider the CAD as an independent system whose properties are inherited from the components. The first step determines the range of tasks to be performed by the system, and a set of components for their implementation. The second one is the configuration of the selected components. The interaction between the selected components is carried out using the CALS standards. The chosen CAD / CAE-oriented approach allows creating a single model, which is stored in the database of the subject area. Each of the integration stages is implemented as a separate functional block. The transformation of the CAD model into the model of the internal representation is realized by the block of searching for the geometric parameters of the technological machine, in which the XML-model of the construction is obtained on the basis of the feature method from the theory of image recognition. The configuration of integrated components is divided into three consecutive steps: configuring tasks, components, interfaces. The configuration of the components is realized using the theory of "soft computations" using the Mamdani fuzzy inference algorithm.

The Power of Computer-aided Tomography to Investigate Marine Benthic Communities

EPA Science Inventory

Utilization of Computer-aided-Tomography (CT) technology is a powerful tool to investigate benthic communities in aquatic systems. In this presentation, we will attempt to summarize our 15 years of experience in developing specific CT methods and applications to marine benthic co...

Microwave processing of a dental ceramic used in computer-aided design/computer-aided manufacturing.

PubMed

Pendola, Martin; Saha, Subrata

2015-01-01

Because of their favorable mechanical properties and natural esthetics, ceramics are widely used in restorative dentistry. The conventional ceramic sintering process required for their use is usually slow, however, and the equipment has an elevated energy consumption. Sintering processes that use microwaves have several advantages compared to regular sintering: shorter processing times, lower energy consumption, and the capacity for volumetric heating. The objective of this study was to test the mechanical properties of a dental ceramic used in computer-aided design/computer-aided manufacturing (CAD/CAM) after the specimens were processed with microwave hybrid sintering. Density, hardness, and bending strength were measured. When ceramic specimens were sintered with microwaves, the processing times were reduced and protocols were simplified. Hardness was improved almost 20% compared to regular sintering, and flexural strength measurements suggested that specimens were approximately 50% stronger than specimens sintered in a conventional system. Microwave hybrid sintering may preserve or improve the mechanical properties of dental ceramics designed for CAD/CAM processing systems, reducing processing and waiting times.

A Conceptual Design of a Departure Planner Decision Aid

NASA Technical Reports Server (NTRS)

Anagnostakis, Ioannis; Idris, Husni R.; Clark, John-Paul; Feron, Eric; Hansman, R. John; Odoni, Amedeo R.; Hall, William D.

2000-01-01

Terminal area Air Traffic Management handles both arriving and departing traffic. To date, research work on terminal area operations has focused primarily on the arrival flow and typically departures are taken into account only in an approximate manner. However, arrivals and departures are highly coupled processes especially in the terminal airspace, with complex interactions and sharing of the same airport resources between arrivals and departures taking place in practically every important terminal area. Therefore, the addition of automation aids for departures, possibly in co-operation with existing arrival flow automation systems, could have a profound contribution in enhancing the overall efficiency of airport operations. This paper presents the conceptual system architecture for such an automation aid, the Departure Planner (DP). This architecture can be used as a core in the development of decision-aiding systems to assist air traffic controllers in improving the performance of departure operations and optimize runway time allocation among different operations at major congested airports. The design of such systems is expected to increase the overall efficiency of terminal area operations and yield benefits for all stakeholders involved in Air Traffic Management (ATM) operations, users as well as service providers.

The development of an online decision aid to support persons having a genetic predisposition to cancer and their partners during reproductive decision-making: a usability and pilot study.

PubMed

Reumkens, Kelly; Tummers, Marly H E; Gietel-Habets, Joyce J G; van Kuijk, Sander M J; Aalfs, Cora M; van Asperen, Christi J; Ausems, Margreet G E M; Collée, Margriet; Dommering, Charlotte J; Kets, C Marleen; van der Kolk, Lizet E; Oosterwijk, Jan C; Tjan-Heijnen, Vivianne C G; van der Weijden, Trudy; de Die-Smulders, Christine E M; van Osch, Liesbeth A D M

2018-05-30

An online decision aid to support persons having a genetic predisposition to cancer and their partners during reproductive decision-making was developed. A two-phase usability test was conducted among 12 couples (N = 22; 2 persons participated without their partner) at risk for hereditary cancer and 15 health care providers. Couples and health care providers expressed similar suggestions for improvements, and evaluated the modified decision aid as acceptable, easy to use, and comprehensible. The final decision aid was pilot tested (N = 16) with paired sample t tests comparing main outcomes (decisional conflict, knowledge, realistic expectations regarding the reproductive options and decision self-efficacy) before (T0), immediately (T1) and 2 weeks after (T2) use of the decision aid. Pilot testing indicated decreased decisional conflict scores, increased knowledge, and improved realistic expectations regarding the reproductive options, at T1 and T2. No effect was found for couples' decision self-efficacy. The positive findings during usability testing were thus reflected in the pilot study. The decision aid will be further evaluated in a nationwide pretest-posttest study to facilitate implementation in the onco-genetic counselling setting. Ultimately, it is expected that the decision aid will enable end-users to make an informed decision.

Discharge Chamber Primary Electron Modeling Activities in Three-Dimensions

NASA Technical Reports Server (NTRS)

Steuber, Thomas J.

2004-01-01

Designing discharge chambers for ion thrusters involves many geometric configuration decisions. Various decisions will impact discharge chamber performance with respect to propellant utilization efficiency, ion production costs, and grid lifetime. These hardware design decisions can benefit from the assistance of computational modeling. Computational modeling for discharge chambers has been limited to two-dimensional codes that leveraged symmetry for interpretation into three-dimensional analysis. This paper presents model development activities towards a three-dimensional discharge chamber simulation to aid discharge chamber design decisions. Specifically, of the many geometric configuration decisions toward attainment of a worthy discharge chamber, this paper focuses on addressing magnetic circuit considerations with a three-dimensional discharge chamber simulation as a tool. With this tool, candidate discharge chamber magnetic circuit designs can be analyzed computationally to gain insight into factors that may influence discharge chamber performance such as: primary electron loss width in magnetic cusps, cathode tip position with respect to the low magnetic field volume, definition of a low magnetic field region, and maintenance of a low magnetic field region across the grid span. Corroborating experimental data will be obtained from mockup hardware tests. Initially, simulated candidate magnetic circuit designs will resemble previous successful thruster designs. To provide opportunity to improve beyond previous performance benchmarks, off-design modifications will be simulated and experimentally tested.

IDEAS: A multidisciplinary computer-aided conceptual design system for spacecraft

NASA Technical Reports Server (NTRS)

Ferebee, M. J., Jr.

1984-01-01

During the conceptual development of advanced aerospace vehicles, many compromises must be considered to balance economy and performance of the total system. Subsystem tradeoffs may need to be made in order to satisfy system-sensitive attributes. Due to the increasingly complex nature of aerospace systems, these trade studies have become more difficult and time-consuming to complete and involve interactions of ever-larger numbers of subsystems, components, and performance parameters. The current advances of computer-aided synthesis, modeling and analysis techniques have greatly helped in the evaluation of competing design concepts. Langley Research Center's Space Systems Division is currently engaged in trade studies for a variety of systems which include advanced ground-launched space transportation systems, space-based orbital transfer vehicles, large space antenna concepts and space stations. The need for engineering analysis tools to aid in the rapid synthesis and evaluation of spacecraft has led to the development of the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. The ADEAS system has been used to perform trade studies of competing technologies and requirements in order to pinpoint possible beneficial areas for research and development. IDEAS is presented as a multidisciplinary tool for the analysis of advanced space systems. Capabilities range from model generation and structural and thermal analysis to subsystem synthesis and performance analysis.

Coaching patients in the use of decision and communication aids: RE-AIM evaluation of a patient support program.

PubMed

Belkora, Jeff; Volz, Shelley; Loth, Meredith; Teng, Alexandra; Zarin-Pass, Margot; Moore, Dan; Esserman, Laura

2015-05-28

Decision aids educate patients about treatment options and outcomes. Communication aids include question lists, consultation summaries, and audio-recordings. In efficacy studies, decision aids increased patient knowledge, while communication aids increased patient question-asking and information recall. Starting in 2004, we trained successive cohorts of post-baccalaureate, pre-medical interns to coach patients in the use of decision and communication aids at our university-based breast cancer clinic. From July 2005 through June 2012, we used the RE-AIM framework to measure Reach, Effectiveness, Adoption, Implementation and Maintenance of our interventions. 1. Reach: Over the study period, our program sent a total of 5,153 decision aids and directly administered 2,004 communication aids. In the most recent program year (2012), out of 1,524 eligible patient appointments, we successfully contacted 1,212 (80%); coached 1,110 (73%) in the self-administered use of decision and communication aids; sent 958 (63%) decision aids; and directly administered communication aids for 419 (27%) patients. In a 2010 survey, coached patients reported self-administering one or more communication aids in 81% of visits 2. Effectiveness: In our pre-post comparisons, decision aids were associated with increased patient knowledge and decreased decisional conflict. Communication aids were associated with increased self-efficacy and number of questions; and with high ratings of patient preparedness and satisfaction 3. Adoption: Among visitors sent decision aids, 82% of survey respondents reviewed some or all; among those administered communication aids, 86% reviewed one or more after the visit 4. Through continuous quality adaptations, we increased the proportion of available staff time used for patient support (i.e. exploitation of workforce capacity) from 29% in 2005 to 84% in 2012 5. Maintenance: The main barrier to sustainability was the cost of paid intern labor. We addressed this by testing a service learning model in which student interns work as program coaches in exchange for academic credit rather than salary. The feasibility test succeeded, and we are now expanding the use of unpaid interns. We have sustained a clinic-wide implementation of decision and communication aids through a novel staffing model that uses paid and unpaid student interns as coaches.

Computer-aided-engineering system for modeling and analysis of ECLSS integration testing

NASA Technical Reports Server (NTRS)

Sepahban, Sonbol

1987-01-01

The accurate modeling and analysis of two-phase fluid networks found in environmental control and life support systems is presently undertaken by computer-aided engineering (CAE) techniques whose generalized fluid dynamics package can solve arbitrary flow networks. The CAE system for integrated test bed modeling and analysis will also furnish interfaces and subsystem/test-article mathematical models. Three-dimensional diagrams of the test bed are generated by the system after performing the requisite simulation and analysis.

Program Aids Design Of Fluid-Circulating Systems

NASA Technical Reports Server (NTRS)

Bacskay, Allen; Dalee, Robert

1992-01-01

Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

Marking parts to aid robot vision

NASA Technical Reports Server (NTRS)

Bales, J. W.; Barker, L. K.

1981-01-01

The premarking of parts for subsequent identification by a robot vision system appears to be beneficial as an aid in the automation of certain tasks such as construction in space. A simple, color coded marking system is presented which allows a computer vision system to locate an object, calculate its orientation, and determine its identity. Such a system has the potential to operate accurately, and because the computer shape analysis problem has been simplified, it has the ability to operate in real time.

Development of a patient decision aid for choice of surgical treatment for breast cancer

PubMed Central

Sawka, Carol A.; Goel, Vivek; Mahut, Catherine A.; Taylor, Glen A.; Thiel, Elaine C.; O'Connor, Annette M.; Ackerman, Ida; Burt, Janet H.; Gort, Elaine H.

2002-01-01

Purpose A patient decision aid for the surgical treatment of early stage breast cancer was developed and evaluated. The rationale for its development was the knowledge that breast conserving therapy (lumpectomy followed by breast radiation) and mastectomy produce equivalent outcomes, and the current general agreement that the decision for the type of surgery should rest with the patient. Methods A decision aid was developed and evaluated in sequential pilot studies of 18 and 10 women with newly diagnosed breast cancer who were facing a decision for breast conserving therapy or mastectomy. Both qualitative (general reaction, self‐reported anxiety, clarity, satisfaction) and quantitative (knowledge and decisional conflict) measures were assessed. Results The decision aid consists of an audiotape and workbook and takes 36 min to complete. Based on qualitative comments and satisfaction ratings, 17 of 18 women reported a positive reaction to the decision aid, and all 18 reported that it helped clarify information given by the surgeon. Women did not report an increase in anxiety and 17 of 18 women were either satisfied or very satisfied with the decision aid. Conclusion This pilot study supports the hypothesis that this decision aid may be a helpful adjunct in the decision for surgical management of early stage breast cancer. We are currently conducting a randomized trial of the decision aid versus a simple educational pamphlet to evaluate its efficacy as measured by knowledge, decisional conflict, anxiety and post‐decisional regret. PMID:11281859

Development and Demonstration of Innovations in Adult Agricultural Education. Final Report.

ERIC Educational Resources Information Center

Persons, Edgar A.; And Others

One of a series of related inquiries, this study focused on computer aided decision making and record keeping in farm management; and on instructional variables in adult agricultural education which affect the reception of agricultural innovations. Phases 1 and 2 of this project entailed use of farm record data in preparing concise summaries and…

Planning and Management of Faculty Resources. AIR Forum 1981 Paper.

ERIC Educational Resources Information Center

Montgomery, James R.; And Others

A computerized faculty allocation and reallocation model is presented to aid the decision maker in evaluating the outcomes of various strategies. A unique goal can be computed for each department based on the average index of the institution, the average of the college, the preceding average of the department, and a goal established by management…

Global HIV/AIDS funding and health systems: Searching for the win-win.

PubMed

Levine, Ruth; Oomman, Nandini

2009-11-01

Donors, developing country governments, and NGOs are searching for ways to use funding for HIV/AIDS programs that strengthen the functioning of weak health systems. This is motivated both by the realization that a large share of donor funding for global health is and will continue to be dedicated to HIV/AIDS, and that the aims of more and better treatment, prevention, and care can be achieved only with attention to systemic capacities. For AIDS resources to strengthen health systems, decision makers should: (a) mitigate the risks that AIDS spending may weaken the ability of health systems to respond to other health problems; (b) find ways for procurement, supply chain, management information, and other systems that are created to support AIDS treatment to be broadened to serve other types of services; and (c) build upon the ways in which AIDS programs have overcome some demand-side barriers to use of services. In pursuing this agenda, donors should recognize that health system development is a function of the national and local political economy and place respect for national sovereignty as a central tenet of their policies and practices.

A Three-Phase Decision Model of Computer-Aided Coding for the Iranian Classification of Health Interventions (IRCHI)

PubMed Central

Azadmanjir, Zahra; Safdari, Reza; Ghazisaeedi, Marjan; Mokhtaran, Mehrshad; Kameli, Mohammad Esmail

2017-01-01

Introduction: Accurate coded data in the healthcare are critical. Computer-Assisted Coding (CAC) is an effective tool to improve clinical coding in particular when a new classification will be developed and implemented. But determine the appropriate method for development need to consider the specifications of existing CAC systems, requirements for each type, our infrastructure and also, the classification scheme. Aim: The aim of the study was the development of a decision model for determining accurate code of each medical intervention in Iranian Classification of Health Interventions (IRCHI) that can be implemented as a suitable CAC system. Methods: first, a sample of existing CAC systems was reviewed. Then feasibility of each one of CAC types was examined with regard to their prerequisites for their implementation. The next step, proper model was proposed according to the structure of the classification scheme and was implemented as an interactive system. Results: There is a significant relationship between the level of assistance of a CAC system and integration of it with electronic medical documents. Implementation of fully automated CAC systems is impossible due to immature development of electronic medical record and problems in using language for medical documenting. So, a model was proposed to develop semi-automated CAC system based on hierarchical relationships between entities in the classification scheme and also the logic of decision making to specify the characters of code step by step through a web-based interactive user interface for CAC. It was composed of three phases to select Target, Action and Means respectively for an intervention. Conclusion: The proposed model was suitable the current status of clinical documentation and coding in Iran and also, the structure of new classification scheme. Our results show it was practical. However, the model needs to be evaluated in the next stage of the research. PMID:28883671

Computer-Aided Recognition of Facial Attributes for Fetal Alcohol Spectrum Disorders.

PubMed

Valentine, Matthew; Bihm, Dustin C J; Wolf, Lior; Hoyme, H Eugene; May, Philip A; Buckley, David; Kalberg, Wendy; Abdul-Rahman, Omar A

2017-12-01

To compare the detection of facial attributes by computer-based facial recognition software of 2-D images against standard, manual examination in fetal alcohol spectrum disorders (FASD). Participants were gathered from the Fetal Alcohol Syndrome Epidemiology Research database. Standard frontal and oblique photographs of children were obtained during a manual, in-person dysmorphology assessment. Images were submitted for facial analysis conducted by the facial dysmorphology novel analysis technology (an automated system), which assesses ratios of measurements between various facial landmarks to determine the presence of dysmorphic features. Manual blinded dysmorphology assessments were compared with those obtained via the computer-aided system. Areas under the curve values for individual receiver-operating characteristic curves revealed the computer-aided system (0.88 ± 0.02) to be comparable to the manual method (0.86 ± 0.03) in detecting patients with FASD. Interestingly, cases of alcohol-related neurodevelopmental disorder (ARND) were identified more efficiently by the computer-aided system (0.84 ± 0.07) in comparison to the manual method (0.74 ± 0.04). A facial gestalt analysis of patients with ARND also identified more generalized facial findings compared to the cardinal facial features seen in more severe forms of FASD. We found there was an increased diagnostic accuracy for ARND via our computer-aided method. As this category has been historically difficult to diagnose, we believe our experiment demonstrates that facial dysmorphology novel analysis technology can potentially improve ARND diagnosis by introducing a standardized metric for recognizing FASD-associated facial anomalies. Earlier recognition of these patients will lead to earlier intervention with improved patient outcomes. Copyright © 2017 by the American Academy of Pediatrics.

High School Students' Written Argumentation Qualities with Problem-Based Computer-Aided Material (PBCAM) Designed about Human Endocrine System

ERIC Educational Resources Information Center

Vekli, Gülsah Sezen; Çimer, Atilla

2017-01-01

This study investigated development of students' scientific argumentation levels in the applications made with Problem-Based Computer-Aided Material (PBCAM) designed about Human Endocrine System. The case study method was used: The study group was formed of 43 students in the 11th grade of the science high school in Rize. Human Endocrine System…

A Survey of CAD/CAM Technology Applications in the U.S. Shipbuilding Industry

DTIC Science & Technology

1984-01-01

operation for drafting. Computer Aided Engineering (CAE) analysis is used primarily to determine the validity of design characteristics and produc- tion...include time standard generation, sea trial analysis , and group Systems integration While no systems surveyed Aided Design (CAD) is the technology... analysis . is the largest problem involving software packages. are truly integrated, many are interfaced. Computer most interfaced category with links

Development and pilot testing of a decision aid for surrogates of patients with prolonged mechanical ventilation

PubMed Central

Cox, Christopher E.; Lewis, Carmen L.; Hanson, Laura C.; Hough, Catherine L.; Kahn, Jeremy M.; White, Douglas B.; Song, Mi-Kyung; Tulsky, James A.; Carson, Shannon S.

2013-01-01

Objective Shared decision making is inadequate in intensive care units (ICUs). Decision aids can improve decision making quality, though their role in an ICU setting is unclear. We aimed to develop and pilot test a decision aid for shared decision makers of patients undergoing prolonged mechanical ventilation. Setting ICUs at three medical centers. Subjects 53 surrogate decision makers and 58 physicians. Design and interventions We developed the decision aid using defined methodological guidelines. After an iterative revision process, formative cognitive testing was performed among surrogate-physician dyads. Next, we compared the decision aid to usual care control in a prospective, before/after design study. Measurements and main results Primary outcomes were physician-surrogate discordance for expected patient survival, comprehension of relevant medical information, and the quality of communication. Compared to control, the intervention group had lower surrogate-physician discordance (7 [10] vs 43 [21]), greater comprehension (11.4 [0.7] vs 6.1 [3.7]), and improved quality of communication (8.7 [1.3] vs 8.4 [1.3]) (all p<0.05) post-intervention. Hospital costs were lower in the intervention group ($110,609 vs $178,618; p=0.044); mortality did not differ by group (38% vs 50%, p=0.95). 94% of surrogates and 100% of physicians reported that the decision aid was useful in decision making. Conclusion We developed a prolonged mechanical ventilation decision aid that is feasible, acceptable, and associated with both improved decision making quality and less resource utilization. Further evaluation using a randomized controlled trial design is needed to evaluate the decision aid's effect on long-term patient and surrogate outcomes. PMID:22635048

The Habitat Demonstration Unit System Integration

NASA Technical Reports Server (NTRS)

Gill, Tracy R.; Kennedy, Kriss J.; Tri, Terry O.; Howe, Alan S.

2010-01-01

The Lunar Surface System Habitat Demonstration Unit (HDU) will require a project team to integrate a variety of contributions from National Aeronautics and Space Administration (NASA) centers and potential outside collaborators and poses a challenge in integrating these disparate efforts into a cohesive architecture. To accomplish the development of the first version of the HDU, the Pressurized Excursion Module (PEM), from conception in June 2009 to rollout for operations in July 2010, the HDU project team is using several strategies to mitigate risks and bring the separate efforts together. First, a set of design standards is being developed to define the interfaces between the various systems of PEM and to the payloads, such as the Geology Laboratory, that those systems will support. Scheduled activities such as early fit-checks and the utilization of a habitat avionics test bed prior to equipment installation into HDU PEM are planned to facilitate the integration process. A coordinated effort to establish simplified Computer Aided Design (CAD) standards and the utilization of a modeling and simulation systems will aid in design and integration concept development. Finally, decision processes on the shell development including the assembly sequence and the transportation have been fleshed out early on HDU design to maximize the efficiency of both integration and field operations.

The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs

PubMed Central

Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

2011-01-01

The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs. PMID:21816958

The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs.

PubMed

Kagan, Jonathan M; Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

2011-12-01

The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs.

Development and pilot testing of a decision aid for drivers with dementia.

PubMed

Carmody, John; Potter, Jan; Lewis, Kate; Bhargava, Sanjay; Traynor, Victoria; Iverson, Don

2014-03-19

An increasing number of older adults drive automobiles. Given that the prevalence of dementia is rising, it is necessary to address the issue of driving retirement. The purpose of this study is to evaluate how a self-administered decision aid contributed to decision making about driving retirement by individuals living with dementia. The primary outcome measure in this study was decisional conflict. Knowledge, decision, satisfaction with decision, booklet use and booklet acceptability were the secondary outcome measures. A mixed methods approach was adopted. Drivers with dementia were recruited from an Aged Care clinic and a Primary Care center in NSW, Australia. Telephone surveys were conducted before and after participants read the decision aid. Twelve participants were recruited (mean age 75, SD 6.7). The primary outcome measure, decisional conflict, improved following use of the decision aid. Most participants felt that the decision aid: (i) was balanced; (ii) presented information well; and (iii) helped them decide about driving. In addition, mean knowledge scores improved after booklet use. This decision aid shows promise as an acceptable, useful and low-cost tool for drivers with dementia. A self-administered decision aid can be used to assist individuals with dementia decide about driving retirement. A randomized controlled trial is underway to evaluate the effectiveness of the tool.

Computer-Aided Transcription in the Courts. Executive Summary. National Center Publication No. R-0058.

ERIC Educational Resources Information Center

National Center for State Courts, Williamsburg, VA.

This report summarizes the findings of the Computer-Aided Transcription (CAT) Project, which conducted a 14-month study of the technology and use of computer systems for translating into English the shorthand notes taken by court reporters on stenotype machines. Included are the state of the art of CAT at the end of 1980 and anticipated future…

System for Computer Automated Typesetting (SCAT) of Computer Authored Texts.

ERIC Educational Resources Information Center

Keeler, F. Laurence

This description of the System for Automated Typesetting (SCAT), an automated system for typesetting text and inserting special graphic symbols in programmed instructional materials created by the computer aided authoring system AUTHOR, provides an outline of the design architecture of the system and an overview including the component…

Computer assisted surgery with 3D robot models and visualisation of the telesurgical action.

PubMed

Rovetta, A

2000-01-01

This paper deals with the support of virtual reality computer action in the procedures of surgical robotics. Computer support gives a direct representation of the surgical theatre. The modelization of the procedure in course and in development gives a psychological reaction towards safety and reliability. Robots similar to the ones used by the manufacturing industry can be used with little modification as very effective surgical tools. They have high precision, repeatability and are versatile in integrating with the medical instrumentation. Now integrated surgical rooms, with computer and robot-assisted intervention, are operating. The computer is the element for a decision taking aid, and the robot works as a very effective tool.

The Role of Computational Modeling and Simulation in the Total Product Life Cycle of Peripheral Vascular Devices

PubMed Central

Morrison, Tina M.; Dreher, Maureen L.; Nagaraja, Srinidhi; Angelone, Leonardo M.; Kainz, Wolfgang

2018-01-01

The total product life cycle (TPLC) of medical devices has been defined by four stages: discovery and ideation, regulatory decision, product launch, and postmarket monitoring. Manufacturers of medical devices intended for use in the peripheral vasculature, such as stents, inferior vena cava (IVC) filters, and stent-grafts, mainly use computational modeling and simulation (CM&S) to aid device development and design optimization, supplement bench testing for regulatory decisions, and assess postmarket changes or failures. For example, computational solid mechanics and fluid dynamics enable the investigation of design limitations in the ideation stage. To supplement bench data in regulatory submissions, manufactures can evaluate the effects of anatomical characteristics and expected in vivo loading environment on device performance. Manufacturers might also harness CM&S to aid root-cause analyses that are necessary when failures occur postmarket, when the device is exposed to broad clinical use. Once identified, CM&S tools can then be used for redesign to address the failure mode and re-establish the performance profile with the appropriate models. The Center for Devices and Radiological Health (CDRH) wants to advance the use of CM&S for medical devices and supports the development of virtual physiological patients, clinical trial simulations, and personalized medicine. Thus, the purpose of this paper is to describe specific examples of how CM&S is currently used to support regulatory submissions at different phases of the TPLC and to present some of the stakeholder-led initiatives for advancing CM&S for regulatory decision-making. PMID:29479395

The Role of Computational Modeling and Simulation in the Total Product Life Cycle of Peripheral Vascular Devices.

PubMed

Morrison, Tina M; Dreher, Maureen L; Nagaraja, Srinidhi; Angelone, Leonardo M; Kainz, Wolfgang

2017-01-01

The total product life cycle (TPLC) of medical devices has been defined by four stages: discovery and ideation, regulatory decision, product launch, and postmarket monitoring. Manufacturers of medical devices intended for use in the peripheral vasculature, such as stents, inferior vena cava (IVC) filters, and stent-grafts, mainly use computational modeling and simulation (CM&S) to aid device development and design optimization, supplement bench testing for regulatory decisions, and assess postmarket changes or failures. For example, computational solid mechanics and fluid dynamics enable the investigation of design limitations in the ideation stage. To supplement bench data in regulatory submissions, manufactures can evaluate the effects of anatomical characteristics and expected in vivo loading environment on device performance. Manufacturers might also harness CM&S to aid root-cause analyses that are necessary when failures occur postmarket, when the device is exposed to broad clinical use. Once identified, CM&S tools can then be used for redesign to address the failure mode and re-establish the performance profile with the appropriate models. The Center for Devices and Radiological Health (CDRH) wants to advance the use of CM&S for medical devices and supports the development of virtual physiological patients, clinical trial simulations, and personalized medicine. Thus, the purpose of this paper is to describe specific examples of how CM&S is currently used to support regulatory submissions at different phases of the TPLC and to present some of the stakeholder-led initiatives for advancing CM&S for regulatory decision-making.

Navigation-aid power systems

NASA Technical Reports Server (NTRS)

Goltz, G. L.; Kaiser, L. M.; Weiner, H.

1979-01-01

Design synthesis and performance analysis (DSPA) program package is collection of subroutines used for computation of design and performance characteristics of viable solar-array-charged battery powered system for flashing-lamp buoys employed as maritime aids to navigation.

Intersubjective decision-making for computer-aided forging technology design

NASA Astrophysics Data System (ADS)

Kanyukov, S. I.; Konovalov, A. V.; Muizemnek, O. Yu.

2017-12-01

We propose a concept of intersubjective decision-making for problems of open-die forging technology design. The intersubjective decisions are chosen from a set of feasible decisions using the fundamentals of the decision-making theory in fuzzy environment according to the Bellman-Zadeh scheme. We consider the formalization of subjective goals and the choice of membership functions for the decisions depending on subjective goals. We study the arrangement of these functions into an intersubjective membership function. The function is constructed for a resulting decision, which is chosen from a set of feasible decisions. The choice of the final intersubjective decision is discussed. All the issues are exemplified by a specific technological problem. The considered concept of solving technological problems under conditions of fuzzy goals allows one to choose the most efficient decisions from a set of feasible ones. These decisions correspond to the stated goals. The concept allows one to reduce human participation in automated design. This concept can be used to develop algorithms and design programs for forging numerous types of forged parts.

Satellite Systems Design/Simulation Environment: A Systems Approach to Pre-Phase A Design

NASA Technical Reports Server (NTRS)

Ferebee, Melvin J., Jr.; Troutman, Patrick A.; Monell, Donald W.

1997-01-01

A toolset for the rapid development of small satellite systems has been created. The objective of this tool is to support the definition of spacecraft mission concepts to satisfy a given set of mission and instrument requirements. The objective of this report is to provide an introduction to understanding and using the SMALLSAT Model. SMALLSAT is a computer-aided Phase A design and technology evaluation tool for small satellites. SMALLSAT enables satellite designers, mission planners, and technology program managers to observe the likely consequences of their decisions in terms of satellite configuration, non-recurring and recurring cost, and mission life cycle costs and availability statistics. It was developed by Princeton Synergetic, Inc. and User Systems, Inc. as a revision of the previous TECHSAT Phase A design tool, which modeled medium-sized Earth observation satellites. Both TECHSAT and SMALLSAT were developed for NASA.

A Fuzzy Rule Based Decision Support System for Identifying Location of Water Harvesting Technologies in Rainfed Agricultural Regions

NASA Astrophysics Data System (ADS)

Chaubey, I.; Vema, V. K.; Sudheer, K.

2016-12-01

Site suitability evaluation of water conservation structures in water scarce rainfed agricultural areas consist of assessment of various landscape characteristics and various criterion. Many of these landscape characteristic attributes are conveyed through linguistic terms rather than precise numeric values. Fuzzy rule based system are capable of incorporating uncertainty and vagueness, when various decision making criteria expressed in linguistic terms are expressed as fuzzy rules. In this study a fuzzy rule based decision support system is developed, for optimal site selection of water harvesting technologies. Water conservation technologies like farm ponds, Check dams, Rock filled dams and percolation ponds aid in conserving water for irrigation and recharging aquifers and development of such a system will aid in improving the efficiency of the structures. Attributes and criteria involved in decision making are classified into different groups to estimate the suitability of the particular technology. The developed model is applied and tested on an Indian watershed. The input attributes are prepared in raster format in ArcGIS software and suitability of each raster cell is calculated and output is generated in the form of a thematic map showing the suitability of the cells pertaining to different technologies. The output of the developed model is compared against the already existing structures and results are satisfactory. This developed model will aid in improving the sustainability and efficiency of the watershed management programs aimed at enhancing in situ moisture content.

Intelligent tutoring systems research in the training systems division: Space applications

NASA Technical Reports Server (NTRS)

Regian, J. Wesley

1988-01-01

Computer-Aided Instruction (CAI) is a mature technology used to teach students in a wide variety of domains. The introduction of Artificial Intelligence (AI) technology of the field of CAI has prompted research and development efforts in an area known as Intelligent Computer-Aided Instruction (ICAI). In some cases, ICAI has been touted as a revolutionary alternative to traditional CAI. With the advent of powerful, inexpensive school computers, ICAI is emerging as a potential rival to CAI. In contrast to this, one may conceive of Computer-Based Training (CBT) systems as lying along a continuum which runs from CAI to ICAI. Although the key difference between the two is intelligence, there is not commonly accepted definition of what constitutes an intelligent instructional system.

Development and evaluation of a breast cancer prevention decision aid for higher‐risk women

PubMed Central

Stacey, Dawn; O'Connor, Annette M.; DeGrasse, Cathy; Verma, Shailendra

2003-01-01

Abstract Objective  To develop and evaluate the effectiveness of a breast cancer prevention decision aid for women aged 50 and older at higher risk of breast cancer. Design  Pre‐test–post‐test study using decision aid alone and in combination with counselling. Setting  Breast Cancer Risk Assessment Clinic. Participants  Twenty‐seven women aged 50–69 with 1.66% or higher 5‐year risk of breast cancer. Intervention  Self‐administered breast cancer prevention decision aid. Main outcome measures  Acceptability; decisional conflict; knowledge; realistic expectations; choice predisposition; intention to improve life‐style practices; psychological distress; and satisfaction with preparation for consultation. Results  The decision aid alone, or in combination with counselling, decreased some dimensions of decisional conflict, increased knowledge (P < 0.01), and created more realistic expectations (P < 0.01). The aid in combination with counselling, significantly reduced decisional conflict (P < 0.01) and psychological distress (P < 0.02), helped the uncertain become certain (P < 0.02), and increased intentions to adopt healthier life‐style practices (P < 0.03). Women rated the aid as acceptable, and both women and practitioners were satisfied with the effect it had on the counselling session. Conclusion  The decision aid shows promise as a useful decision support tool. Further research should compare the effect of the decision aid in combination with counselling to counselling alone. PMID:12603624

Acceptance of shared decision making with reference to an electronic library of decision aids (arriba-lib) and its association to decision making in patients: an evaluation study.

PubMed

Hirsch, Oliver; Keller, Heidemarie; Krones, Tanja; Donner-Banzhoff, Norbert

2011-07-07

Decision aids based on the philosophy of shared decision making are designed to help patients make informed choices among diagnostic or treatment options by delivering evidence-based information on options and outcomes. A patient decision aid can be regarded as a complex intervention because it consists of several presumably relevant components. Decision aids have rarely been field tested to assess patients' and physicians' attitudes towards them. It is also unclear what effect decision aids have on the adherence to chosen options. The electronic library of decision aids (arriba-lib) to be used within the clinical encounter has a modular structure and contains evidence-based decision aids for the following topics: cardiovascular prevention, atrial fibrillation, coronary heart disease, oral antidiabetics, conventional and intensified insulin therapy, and unipolar depression. We conducted an evaluation study in which 29 primary care physicians included 192 patients. After the consultation, patients filled in questionnaires and were interviewed via telephone two months later. We used generalised estimation equations to measure associations within patient variables and traditional crosstab analyses. Patients were highly satisfied with arriba-lib and the process of shared decision making. Two-thirds of patients reached in the telephone interview wanted to be counselled again with arriba-lib. There was a high congruence between preferred and perceived decision making. Of those patients reached in the telephone interview, 80.7% said that they implemented the decision, independent of gender and education. Elderly patients were more likely to say that they implemented the decision. Shared decision making with our multi-modular electronic library of decision aids (arriba-lib) was accepted by a high number of patients. It has positive associations to general aspects of decision making in patients. It can be used for patient groups with a wide range of individual characteristics.

Computer-aided auscultation learning system for nursing technique instruction.

PubMed

Hou, Chun-Ju; Chen, Yen-Ting; Hu, Ling-Chen; Chuang, Chih-Chieh; Chiu, Yu-Hsien; Tsai, Ming-Shih

2008-01-01

Pulmonary auscultation is a physical assessment skill learned by nursing students for examining the respiratory system. Generally, a sound simulator equipped mannequin is used to group teach auscultation techniques via classroom demonstration. However, nursing students cannot readily duplicate this learning environment for self-study. The advancement of electronic and digital signal processing technologies facilitates simulating this learning environment. This study aims to develop a computer-aided auscultation learning system for assisting teachers and nursing students in auscultation teaching and learning. This system provides teachers with signal recording and processing of lung sounds and immediate playback of lung sounds for students. A graphical user interface allows teachers to control the measuring device, draw lung sound waveforms, highlight lung sound segments of interest, and include descriptive text. Effects on learning lung sound auscultation were evaluated for verifying the feasibility of the system. Fifteen nursing students voluntarily participated in the repeated experiment. The results of a paired t test showed that auscultative abilities of the students were significantly improved by using the computer-aided auscultation learning system.

Mining data from hemodynamic simulations for generating prediction and explanation models.

PubMed

Bosnić, Zoran; Vračar, Petar; Radović, Milos D; Devedžić, Goran; Filipović, Nenad D; Kononenko, Igor

2012-03-01

One of the most common causes of human death is stroke, which can be caused by carotid bifurcation stenosis. In our work, we aim at proposing a prototype of a medical expert system that could significantly aid medical experts to detect hemodynamic abnormalities (increased artery wall shear stress). Based on the acquired simulated data, we apply several methodologies for1) predicting magnitudes and locations of maximum wall shear stress in the artery, 2) estimating reliability of computed predictions, and 3) providing user-friendly explanation of the model's decision. The obtained results indicate that the evaluated methodologies can provide a useful tool for the given problem domain. © 2012 IEEE

A Landsat-based inventory procedure for agriculture in California

NASA Technical Reports Server (NTRS)

Wall, S. L.; Thomas, R. W.; Brown, C. E.; Bauer, E. H.

1982-01-01

Agriculture, which occupies a vital position in the economy of the State of California, depends crucially on the available water. The California Department of Water Resources (DWR) is, therefore, greatly concerned with the total water requirements for agricultural applications. In view of the limitations of an area-limited, single-date survey system, the DWR has been cooperating with NASA and the University of California in a study of the applicability of Landsat imagery and digital data as an aid in making decisions concerning the management of water resources. Attention is given to a statewide inventory of irrigated land, computer-assisted estimation and mapping of irrigated land, and a crop type analysis using Landsat digital data.

Final Tactical Decision Aid (FTDA) for Infrared (8-12 Micrometers) Systems - Manual Version. Appendix B. Insolation and Sky Radiation Tables,

DTIC Science & Technology

1982-09-15

for use in determining solar irradiance as a function of terrain elevation is also presented. Errors in computed sea level values of sky radiation as a...Renobserved if the Ground Were at Sea Level .. ..................... 365 5. Sky Radiation (W SK).. .. ....... ....... ....... 366 SKYY and Dewpoint SKY...WS -M 00 OiLn 00 00 00 .0 .. q . m1’ C14 IN’ .- *- * .0 *0 *0 0 .0 0 Y -’ CD N inC 0 M W N L- 04c 1- Wq an’ U) 14 N- 00 00 Mcq N N r- (’IC’I) (’ - M -0

Development and feasibility testing of decision support for patients who are candidates for a prophylactic implantable defibrillator: a study protocol for a pilot randomized controlled trial

PubMed Central

2013-01-01

Background Patients, identified to be at risk for but who have never experienced a potentially lethal cardiac arrhythmia, have the option of receiving an implantable cardioverter defibrillator (ICD) as prophylaxis against sudden cardiac death - a primary prevention indication. In Canada, there is no clear framework to support patients’ decision-making for these devices. Decision support, using a decision aid, could moderate treatment-related uncertainty and prepare patients to make well-informed decisions. Patient decision aids provide information on treatment options, risks, and benefits, to help patients clarify their values for outcomes of treatment options. The objectives of this research are: 1) develop a decision aid, 2) evaluate the decision aid, and 3) determine the feasibility of conducting a trial. Methods/design A development panel comprised of the core investigative team, health service researchers, decision science experts, cardiovascular healthcare practitioners, and ICD patient representatives will collaborate to provide input on the content and format of the aid. To generate probabilities to include in the aid, we will synthesize primary prevention ICD evidence. To obtain anonymous input about the facts and content, we will employ a modified Delphi process. To evaluate the draft decision aid will invite ICD patients and their families (n = 30) to rate its acceptability. After we evaluate the aid, to determine the feasibility, we will conduct a feasibility pilot randomized controlled trial (RCT) in new ICD candidates (n = 80). Participants will be randomized to receive a decision aid prior to specialist consultation versus usual care. Results from the pilot RCT will determine the feasibility of research processes; inform sample size calculation, measure decision quality (knowledge, values, decision conflict) and the influence of health related quality of life on decision-making. Discussion Our study seeks to develop a decision aid, for patients offered their first ICD for prophylaxis against sudden cardiac death. This paper outlines the background and methods of a pilot randomized trial which will inform a larger multicenter trial. Ultimately, decision support prior to specialist consultation could enhance the decision-making process between patients, physicians, and families, associated with life-prolonging medical devices like the ICD. Trial registration ClinicalTrials.gov: NCT01876173 PMID:24148851

Development and feasibility testing of decision support for patients who are candidates for a prophylactic implantable defibrillator: a study protocol for a pilot randomized controlled trial.

PubMed

Carroll, Sandra L; McGillion, Michael; Stacey, Dawn; Healey, Jeff S; Browne, Gina; Arthur, Heather M; Thabane, Lehana

2013-10-22

Patients, identified to be at risk for but who have never experienced a potentially lethal cardiac arrhythmia, have the option of receiving an implantable cardioverter defibrillator (ICD) as prophylaxis against sudden cardiac death - a primary prevention indication. In Canada, there is no clear framework to support patients' decision-making for these devices. Decision support, using a decision aid, could moderate treatment-related uncertainty and prepare patients to make well-informed decisions. Patient decision aids provide information on treatment options, risks, and benefits, to help patients clarify their values for outcomes of treatment options. The objectives of this research are: 1) develop a decision aid, 2) evaluate the decision aid, and 3) determine the feasibility of conducting a trial. A development panel comprised of the core investigative team, health service researchers, decision science experts, cardiovascular healthcare practitioners, and ICD patient representatives will collaborate to provide input on the content and format of the aid. To generate probabilities to include in the aid, we will synthesize primary prevention ICD evidence. To obtain anonymous input about the facts and content, we will employ a modified Delphi process. To evaluate the draft decision aid will invite ICD patients and their families (n = 30) to rate its acceptability. After we evaluate the aid, to determine the feasibility, we will conduct a feasibility pilot randomized controlled trial (RCT) in new ICD candidates (n = 80). Participants will be randomized to receive a decision aid prior to specialist consultation versus usual care. Results from the pilot RCT will determine the feasibility of research processes; inform sample size calculation, measure decision quality (knowledge, values, decision conflict) and the influence of health related quality of life on decision-making. Our study seeks to develop a decision aid, for patients offered their first ICD for prophylaxis against sudden cardiac death. This paper outlines the background and methods of a pilot randomized trial which will inform a larger multicenter trial. Ultimately, decision support prior to specialist consultation could enhance the decision-making process between patients, physicians, and families, associated with life-prolonging medical devices like the ICD. ClinicalTrials.gov: NCT01876173.

Consideration of Insulin Pumps or Continuous Glucose Monitors by Adolescents With Type 1 Diabetes and Their Parents: Stakeholder Engagement in the Design of Web-Based Decision Aids.

PubMed

Wysocki, Tim; Hirschfeld, Fiona; Miller, Louis; Izenberg, Neil; Dowshen, Steven A; Taylor, Alex; Milkes, Amy; Shinseki, Michelle T; Bejarano, Carolina; Kozikowski, Chelsea; Kowal, Karen; Starr-Ashton, Penny; Ross, Judith L; Kummer, Mark; Carakushansky, Mauri; Lyness, D'Arcy; Brinkman, William; Pierce, Jessica; Fiks, Alexander; Christofferson, Jennifer; Rafalko, Jessica; Lawson, Margaret L

2016-08-01

This article describes the stakeholder-driven design, development, and testing of web-based, multimedia decision aids for youth with type 1 diabetes who are considering the insulin pump or continuous glucose monitoring and their parents. This is the initial phase of work designed to develop and evaluate the efficacy of these decision aids in promoting improved decision-making engagement with use of a selected device. Qualitative interviews of 36 parents and adolescents who had previously faced these decisions and 12 health care providers defined the content, format and structure of the decision aids. Experts in children's health media helped the research team to plan, create, and refine multimedia content and its presentation. A web development firm helped organize the content into a user-friendly interface and enabled tracking of decision aid utilization. Throughout, members of the research team, adolescents, parents, and 3 expert consultants offered perspectives about the website content, structure, and function until the design was complete. With the decision aid websites completed, the next phase of the project is a randomized controlled trial of usual clinical practice alone or augmented by use of the decision aid websites. Stakeholder-driven development of multimedia, web-based decision aids requires meticulous attention to detail but can yield exceptional resources for adolescents and parents contemplating major changes to their diabetes regimens. © 2016 The Author(s).

3D printing of an aortic aneurysm to facilitate decision making and device selection for endovascular aneurysm repair in complex neck anatomy.

PubMed

Tam, Matthew D B S; Laycock, Stephen D; Brown, James R I; Jakeways, Matthew

2013-12-01

To describe rapid prototyping or 3-dimensional (3D) printing of aneurysms with complex neck anatomy to facilitate endovascular aneurysm repair (EVAR). A 75-year-old man had a 6.6-cm infrarenal aortic aneurysm that appeared on computed tomographic angiography to have a sharp neck angulation of ~90°. However, although the computed tomography (CT) data were analyzed using centerline of flow, the true neck length and relations of the ostial origins were difficult to determine. No multidisciplinary consensus could be reached as to which stent-graft to use owing to these borderline features of the neck anatomy. Based on past experience with rapid prototyping technology, a decision was taken to print a model of the aneurysm to aid in visualization of the neck anatomy. The CT data were segmented, processed, and converted into a stereolithographic format representing the lumen as a 3D volume, from which a full-sized replica was printed within 24 hours. The model demonstrated that the neck was adequate for stent-graft repair using the Aorfix device. Rapid prototyping of aortic aneurysms is feasible and can aid decision making and device delivery. Further work is required to test the value of 3D replicas in planning procedures and their impact on procedure time, radiation dose, and procedure cost.

Variable size computer-aided detection prompts and mammography film reader decisions

PubMed Central

Gilbert, Fiona J; Astley, Susan M; Boggis, Caroline RM; McGee, Magnus A; Griffiths, Pamela M; Duffy, Stephen W; Agbaje, Olorunsola F; Gillan, Maureen GC; Wilson, Mary; Jain, Anil K; Barr, Nicola; Beetles, Ursula M; Griffiths, Miriam A; Johnson, Jill; Roberts, Rita M; Deans, Heather E; Duncan, Karen A; Iyengar, Geeta

2008-01-01

Introduction The purpose of the present study was to investigate the effect of computer-aided detection (CAD) prompts on reader behaviour in a large sample of breast screening mammograms by analysing the relationship of the presence and size of prompts to the recall decision. Methods Local research ethics committee approval was obtained; informed consent was not required. Mammograms were obtained from women attending routine mammography at two breast screening centres in 1996. Films, previously double read, were re-read by a different reader using CAD. The study material included 315 cancer cases comprising all screen-detected cancer cases, all subsequent interval cancers and 861 normal cases randomly selected from 10,267 cases. Ground truth data were used to assess the efficacy of CAD prompting. Associations between prompt attributes and tumour features or reader recall decisions were assessed by chi-squared tests. Results There was a highly significant relationship between prompting and a decision to recall for cancer cases and for a random sample of normal cases (P < 0.001). Sixty-four per cent of all cases contained at least one CAD prompt. In cancer cases, larger prompts were more likely to be recalled (P = 0.02) for masses but there was no such association for calcifications (P = 0.9). In a random sample of 861 normal cases, larger prompts were more likely to be recalled (P = 0.02) for both mass and calcification prompts. Significant associations were observed with prompting and breast density (p = 0.009) for cancer cases but not for normal cases (P = 0.05). Conclusions For both normal cases and cancer cases, prompted mammograms were more likely to be recalled and the prompt size was also associated with a recall decision. PMID:18724867

Variable size computer-aided detection prompts and mammography film reader decisions.

PubMed

Gilbert, Fiona J; Astley, Susan M; Boggis, Caroline Rm; McGee, Magnus A; Griffiths, Pamela M; Duffy, Stephen W; Agbaje, Olorunsola F; Gillan, Maureen Gc; Wilson, Mary; Jain, Anil K; Barr, Nicola; Beetles, Ursula M; Griffiths, Miriam A; Johnson, Jill; Roberts, Rita M; Deans, Heather E; Duncan, Karen A; Iyengar, Geeta

2008-01-01

The purpose of the present study was to investigate the effect of computer-aided detection (CAD) prompts on reader behaviour in a large sample of breast screening mammograms by analysing the relationship of the presence and size of prompts to the recall decision. Local research ethics committee approval was obtained; informed consent was not required. Mammograms were obtained from women attending routine mammography at two breast screening centres in 1996. Films, previously double read, were re-read by a different reader using CAD. The study material included 315 cancer cases comprising all screen-detected cancer cases, all subsequent interval cancers and 861 normal cases randomly selected from 10,267 cases. Ground truth data were used to assess the efficacy of CAD prompting. Associations between prompt attributes and tumour features or reader recall decisions were assessed by chi-squared tests. There was a highly significant relationship between prompting and a decision to recall for cancer cases and for a random sample of normal cases (P < 0.001). Sixty-four per cent of all cases contained at least one CAD prompt. In cancer cases, larger prompts were more likely to be recalled (P = 0.02) for masses but there was no such association for calcifications (P = 0.9). In a random sample of 861 normal cases, larger prompts were more likely to be recalled (P = 0.02) for both mass and calcification prompts. Significant associations were observed with prompting and breast density (p = 0.009) for cancer cases but not for normal cases (P = 0.05). For both normal cases and cancer cases, prompted mammograms were more likely to be recalled and the prompt size was also associated with a recall decision.

Human interaction with wearable computer systems: a look at glasses-mounted displays

NASA Astrophysics Data System (ADS)

Revels, Allen R.; Quill, Laurie L.; Kancler, David E.; Masquelier, Barbara L.

1998-09-01

With the advancement of technology and the information explosion, integration of the two into performance aiding systems can have a significant impact on operational and maintenance environments. The Department of Defense and commercial industry have made great strides in digitizing and automating technical manuals and data to be presented on performance aiding systems. These performance aides are computerized interactive systems that provide procedures on how to operate and maintain fielded systems. The idea is to provide the end-user a system which is compatible with their work environment. The purpose of this paper is to show, historically, the progression of wearable computer aiding systems for maintenance environments, and then highlight the work accomplished in the design and development of glasses- mounted displays (GMD). The paper reviews work performed over the last seven years, then highlights, through review of a usability study, the advances made with GMDs. The use of portable computing systems, such as laptop and notebook, computers, does not necessarily increase the accessibility of the displayed information while accomplishing a given task in a hands-busy, mobile work environment. The use of a GMD increases accessibility of the information by placing it in eye sight of the user without obstructing the surrounding environment. Although the potential utility for this type of display is great, hardware and human integration must be refined. Results from the usability study show the usefulness and usability of the GMD in a mobile, hands-free environment.

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

Cultural targeting and tailoring of shared decision making technology: a theoretical framework for improving the effectiveness of patient decision aids in culturally diverse groups.

PubMed

Alden, Dana L; Friend, John; Schapira, Marilyn; Stiggelbout, Anne

2014-03-01

Patient decision aids are known to positively impact outcomes critical to shared decision making (SDM), such as gist knowledge and decision preparedness. However, research on the potential improvement of these and other important outcomes through cultural targeting and tailoring of decision aids is very limited. This is the case despite extensive evidence supporting use of cultural targeting and tailoring to improve the effectiveness of health communications. Building on prominent psychological theory, we propose a two-stage framework incorporating cultural concepts into the design process for screening and treatment decision aids. The first phase recommends use of cultural constructs, such as collectivism and individualism, to differentially target patients whose cultures are known to vary on these dimensions. Decision aid targeting is operationalized through use of symbols and values that appeal to members of the given culture. Content dimensions within decision aids that appear particularly appropriate for targeting include surface level visual characteristics, language, beliefs, attitudes and values. The second phase of the framework is based on evidence that individuals vary in terms of how strongly cultural norms influence their approach to problem solving and decision making. In particular, the framework hypothesizes that differences in terms of access to cultural mindsets (e.g., access to interdependent versus independent self) can be measured up front and used to tailor decision aids. Thus, the second phase in the framework emphasizes the importance of not only targeting decision aid content, but also tailoring the information to the individual based on measurement of how strongly he/she is connected to dominant cultural mindsets. Overall, the framework provides a theory-based guide for researchers and practitioners who are interested in using cultural targeting and tailoring to develop and test decision aids that move beyond a "one-size fits all" approach and thereby, improve SDM in our multicultural world. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Use of Computers to Aid Instruction in Beginning Chemistry

ERIC Educational Resources Information Center

Grandey, Robert C.

1971-01-01

Describes computer-aided lessons for determining chemical formulas from composition by weight, quantities from chemical equations, and balancing equations for oxidation-reduction reactions. Lessons were developed and used on the PLATO system at the University of Illinois. A brief analysis of student attitudes and of effectiveness of the programs…

Electronic Computer Aided Design. Its Application in FE.

ERIC Educational Resources Information Center

Further Education Unit, London (England).

A study was conducted at the Electronics Industrial Unit at the Dorset Institute of Higher Education to investigate the feasibility of incorporating computer-aided design (CAD) in electrical and electronic courses. The aim was to investigate the application of CAD to electrical and electronic systems; the extent to which industrial developments…

Computer-Aided Instruction.

ERIC Educational Resources Information Center

Hunt, Graham

This report discusses the impact of and presents guidelines for developing a computer-aided instructional (CAI) system. The first section discusses CAI in terms of the need for the countries of Asia to increase their economic self-sufficiency. The second section examines various theories on the nature of learning with special attention to the role…

Software Engineering Techniques for Computer-Aided Learning.

ERIC Educational Resources Information Center

Ibrahim, Bertrand

1989-01-01

Describes the process for developing tutorials for computer-aided learning (CAL) using a programing language rather than an authoring system. The workstation used is described, the use of graphics is discussed, the role of a local area network (LAN) is explained, and future plans are discussed. (five references) (LRW)