Computer-Aided College Algebra: Learning Components that Students Find Beneficial

ERIC Educational Resources Information Center

Aichele, Douglas B.; Francisco, Cynthia; Utley, Juliana; Wescoatt, Benjamin

2011-01-01

A mixed-method study was conducted during the Fall 2008 semester to better understand the experiences of students participating in computer-aided instruction of College Algebra using the software MyMathLab. The learning environment included a computer learning system for the majority of the instruction, a support system via focus groups (weekly…

Computer Aided Instruction: A Study of Student Evaluations and Academic Performance

ERIC Educational Resources Information Center

Collins, David; Deck, Alan; McCrickard, Myra

2008-01-01

Computer aided instruction (CAI) encompasses a broad range of computer technologies that supplement the classroom learning environment and can dramatically increase a student's access to information. Criticism of CAI generally focuses on two issues: it lacks an adequate foundation in educational theory and the software is difficult to implement…

Using Computer-Aided Instruction to Support the Systematic Practice of Phonological Skills in Beginning Readers

ERIC Educational Resources Information Center

Wild, Mary

2009-01-01

The paper reports the results of a randomised control trial investigating the use of computer-aided instruction (CAI) for practising phonological awareness skills with beginning readers. Two intervention groups followed the same phonological awareness programme: one group undertook practice exercises using a computer and the other group undertook…

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

The Role of Computer-Aided Instruction in Science Courses and the Relevant Misconceptions of Pre-Service Teachers

ERIC Educational Resources Information Center

Aksakalli, Ayhan; Turgut, Umit; Salar, Riza

2016-01-01

This research aims to investigate the ways in which pre-service physics teachers interact with computers, which, as an indispensable means of today's technology, are of major value in education and training, and to identify any misconceptions said teachers may have about computer-aided instruction. As part of the study, computer-based physics…

Intelligent Computer-Aided Instruction for Medical Diagnosis

PubMed Central

Clancey, William J.; Shortliffe, Edward H.; Buchanan, Bruce G.

1979-01-01

An intelligent computer-aided instruction (ICAI) program, named GUIDON, has been developed for teaching infectious disease diagnosis.* ICAI programs use artificial intelligence techniques for representing both subject material and teaching strategies. This paper briefly outlines the difference between traditional instructional programs and ICAI. We then illustrate how GUIDON makes contributions in areas important to medical CAI: interacting with the student in a mixed-initiative dialogue (including the problems of feedback and realism), teaching problem-solving strategies, and assembling a computer-based curriculum.

Evaluation and Assessment of a Biomechanics Computer-Aided Instruction.

ERIC Educational Resources Information Center

Washington, N.; Parnianpour, M.; Fraser, J. M.

1999-01-01

Describes the Biomechanics Tutorial, a computer-aided instructional tool that was developed at Ohio State University to expedite the transition from lecture to application for undergraduate students. Reports evaluation results that used statistical analyses and student questionnaires to show improved performance on posttests as well as positive…

Computer-Aided Instruction.

ERIC Educational Resources Information Center

Hunt, Graham

This report discusses the impact of and presents guidelines for developing a computer-aided instructional (CAI) system. The first section discusses CAI in terms of the need for the countries of Asia to increase their economic self-sufficiency. The second section examines various theories on the nature of learning with special attention to the role…

Wusor II: A Computer Aided Instruction Program with Student Modelling Capabilities. AI Memo 417.

ERIC Educational Resources Information Center

Carr, Brian

Wusor II is the second intelligent computer aided instruction (ICAI) program that has been developed to monitor the progress of, and offer suggestions to, students playing Wumpus, a computer game designed to teach logical thinking and problem solving. From the earlier efforts with Wusor I, it was possible to produce a rule-based expert which…

Publishing Trends in Educational Computing.

ERIC Educational Resources Information Center

O'Hair, Marilyn; Johnson, D. LaMont

1989-01-01

Describes results of a survey of secondary school and college teachers that was conducted to determine subject matter that should be included in educational computing journals. Areas of interest included computer applications; artificial intelligence; computer-aided instruction; computer literacy; computer-managed instruction; databases; distance…

Intelligent Computer-Aided Instruction Research at the Open University. CITE Report No. 10.

ERIC Educational Resources Information Center

Elsom-Cook, Mark

This document introduces the aims and activities of the Intelligent Computer Aided Instruction (ICAI) research community situated within the Centre for Information Technology in Education (CITE) at the Open University in Great Britain, outlines the nature of the problems which come under the auspices of ICAI, and describes the research…

The Effects of Computer-Aided Instruction on Learning and Attitudes in Economic Principles Courses: Revised Results.

ERIC Educational Resources Information Center

Henry, Mark

1979-01-01

Recounts statistical inaccuracies in an article on computer-aided instruction in economics courses on the college level. The article, published in the J. Econ. Ed (Fall 1978), erroneously placed one student in the TIPS group instead of the control group. Implications of this alteration are discussed. (DB)

Computer-assisted instruction in programming: AID

NASA Technical Reports Server (NTRS)

Friend, J.; Atkinson, R. C.

1971-01-01

Lessons for training students on how to program and operate computers to and AID language are given. The course consists of a set of 50 lessons, plus summaries, reviews, tests, and extra credit problems. No prior knowledge is needed for the course, the only requirement being a strong background in algebra. A student manual, which includes instruction for operating the instructional program and a glossary of terms used in the course, is included in the appendices.

Design of Computer-aided Instruction for Radiology Interpretation: The Role of Cognitive Task Analysis

PubMed Central

Pusic, Martin V.; LeBlanc, Vicki; Patel, Vimla L.

2001-01-01

Traditional task analysis for instructional design has emphasized the importance of precisely defining behavioral educational objectives and working back to select objective-appropriate instructional strategies. However, this approach may miss effective strategies. Cognitive task analysis, on the other hand, breaks a process down into its component knowledge representations. Selection of instructional strategies based on all such representations in a domain is likely to lead to optimal instructional design. In this demonstration, using the interpretation of cervical spine x-rays as an educational example, we show how a detailed cognitive task analysis can guide the development of computer-aided instruction.

Computer Instructional Aids for Undergraduate Control Education.

ERIC Educational Resources Information Center

Volz, Richard A.; And Others

Engineering is coming to rely more and more heavily upon the computer for computations, analyses, and graphic displays which aid the design process. A general purpose simulation system, the Time-shared Automatic Control Laboratory (TACL), and a set of computer-aided design programs, Control Oriented Interactive Graphic Analysis and Design…

The Effectiveness of Computer-Aid, Self-Instructional Programs in Dental Education: A Systematic Review of the Literature.

ERIC Educational Resources Information Center

Rosenberg, Harold; Grad, Helen A.; Matear, David W.

2003-01-01

Performed a systematic review of the published literature comparing computer-aided learning (CAL) with other teaching methods in dental education. Concluded that CAL is as effective as other methods of teaching and can be used as an adjunct to traditional education or as a means of self-instruction. (EV)

Implementing Computer-Aided Instruction in Distance Education: An Infrastructure. RR/89-06.

ERIC Educational Resources Information Center

Kotze, Paula

The infrastructure required for the implementation of computer aided instruction is described with particular reference to the distance education environment at the University of South Africa. A review of the state of the art of online distance education in the United States and Europe is followed by an outline of the proposed infrastructure for…

A Complete Interactive Graphical Computer-Aided Instruction System.

ERIC Educational Resources Information Center

Abrams, Steven Selby

The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

Expert Systems: Tutors, Tools, and Tutees.

ERIC Educational Resources Information Center

Lippert, Renate C.

1989-01-01

Discusses the current status, research, and practical implications of artificial intelligence and expert systems in education. Topics discussed include computer-assisted instruction; intelligent computer-assisted instruction; intelligent tutoring systems; instructional strategies involving the creation of knowledge bases; decision aids;…

RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

ERIC Educational Resources Information Center

Stewart, John Christopher

Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

Evaluation of Computer-Aided Instruction in a Gross Anatomy Course: A Six-Year Study

ERIC Educational Resources Information Center

McNulty, John A.; Sonntag, Beth; Sinacore, James M.

2009-01-01

Web-based computer-aided instruction (CAI) has become increasingly important to medical curricula. This multi-year study investigated the effectiveness of CAI and the factors affecting level of individual use. Three CAI were tested that differed in specificity of applicability to the curriculum and in the level of student interaction with the CAI.…

Computer Aided Instruction and Problem Solving in the Teaching of Oral Diagnosis.

ERIC Educational Resources Information Center

Spencer, Judson; Gobetti, John P.

A computer-assisted instructional (CAI) program is being used at the University of Michigan School of Dentistry to aid in the teaching of oral diagnosis to dental students. The program is designed to simulate a real life situation--i.e., the diagnosis of patient illness-which would not be otherwise available to the student and to demonstrate to…

Computer Aided Drafting Curriculum for Vocational Drafting. A Competency Based Unit of Instruction. Final Report.

ERIC Educational Resources Information Center

Peck, Greg

This document contains (1) the final report of a project to develop a computer-aided drafting (CAD) curriculum and (2) a competency-based unit of instruction for use with the CADAPPLE system. The final report states the problem and project objective, presents conclusions and recommendations, and includes survey instruments. The unit is designed…

A Design of Computer Aided Instructions (CAI) for Undirected Graphs in the Discrete Math Tutorial (DMT). Part 1.

DTIC Science & Technology

1990-06-01

The objective of this thesis research is to create a tutorial for teaching aspects of undirected graphs in discrete math . It is one of the submodules...of the Discrete Math Tutorial (DMT), which is a Computer Aided Instructional (CAI) tool for teaching discrete math to the Naval Academy and the

A Design of Computer Aided Instructions (CAI) for Undirected Graphs in the Discrete Math Tutorial (DMT). Part 2

DTIC Science & Technology

1990-06-01

The objective of this thesis research is to create a tutorial for teaching aspects of undirected graphs in discrete math . It is one of the submodules...of the Discrete Math Tutorial (DMT), which is a Computer Aided Instructional (CAI) tool for teaching discrete math to the Naval Academy and the

Buying CAM.

ERIC Educational Resources Information Center

Meloy, Jim; And Others

1990-01-01

The relationship between computer-aided design (CAD), computer-aided manufacturing (CAM), and computer numerical control (CNC) computer applications is described. Tips for helping educate the CAM buyer on what to look for and what to avoid when searching for the most appropriate instructional CAM package are provided. (KR)

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

ERIC Educational Resources Information Center

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

Introduction to Computer Aided Instruction in the Language Laboratory.

ERIC Educational Resources Information Center

Hughett, Harvey L.

The first half of this book focuses on the rationale, ideas, and information for the use of technology, including microcomputers, to improve language teaching efficiency. Topics discussed include foreign language computer assisted instruction (CAI), hardware and software selection, computer literacy, educational computing organizations, ease of…

An Evaluation of Computer-Aided Instruction in an Introductory Biostatistics Course.

ERIC Educational Resources Information Center

Forsythe, Alan B.; Freed, James R.

1979-01-01

Evaluates the effectiveness of computer assisted instruction for teaching biostatistics to first year students at the UCLA School of Dentistry. Results do not demonstrate the superiority of CAI but do suggest that CAI compares favorably to conventional lecture and programed instruction methods. (RAO)

Videodiscs in Voc Ed. Information Series No. 299.

ERIC Educational Resources Information Center

Olivier, William P.

This paper provides teachers and trainers with the concepts and procedures involved in using interactive videodisc technology for instruction. Described first are types of individualized instruction that have influenced videodisc development: programmed and computer-aided instruction, as well as computer graphics. Then the author explains how…

Computer-Aided Instruction: College Algebra Students' Perceptions

ERIC Educational Resources Information Center

Aichele, Douglas B.; Tree, D. Rae; Utley, Juliana; Wescoatt, Benjamin

2012-01-01

Technology permeates our daily lives; education has not been untouched. Liaw (2002) points out that "teachers, trainers, and instructional designers of computer-based or Web-based instruction would benefit by being more attentive to learners' perceptions toward Web-based environments." Reviewing the earlier research into student perceptions toward…

The Efficiency of Computer-Aided Instruction and Creative Drama on Academic Achievement in Teaching of Integers to Seventh Grade Students

ERIC Educational Resources Information Center

Kaplan, Abdullah; Özturk, Mesut; Ertör, Eren

2013-01-01

This study aims to compare computer-aided instruction, creative drama and traditional teaching methods in teaching of Integers to the seventh grade students. The study was conducted in a primary school with eighty-seven students (N=87) in a county of Agri, in spring term of academic year 2011-2012. A non equivalent control group quasi experimental…

Using Pre-test/Post-test Data To Evaluate the Effectiveness of Computer Aided Instruction (A Study of CAI and Its Use with Developmental Reading Students).

ERIC Educational Resources Information Center

Lansford, Carl E.

As computer aided instruction (CAI) and distance learning become more popular, a model for easily evaluating these teaching methods must be developed, one which will enable replication of the study each year. This paper discusses the results of a study using existing dependent and independent variables to evaluate CAI for developmental reading…

Intelligent tutoring systems research in the training systems division: Space applications

NASA Technical Reports Server (NTRS)

Regian, J. Wesley

1988-01-01

Computer-Aided Instruction (CAI) is a mature technology used to teach students in a wide variety of domains. The introduction of Artificial Intelligence (AI) technology of the field of CAI has prompted research and development efforts in an area known as Intelligent Computer-Aided Instruction (ICAI). In some cases, ICAI has been touted as a revolutionary alternative to traditional CAI. With the advent of powerful, inexpensive school computers, ICAI is emerging as a potential rival to CAI. In contrast to this, one may conceive of Computer-Based Training (CBT) systems as lying along a continuum which runs from CAI to ICAI. Although the key difference between the two is intelligence, there is not commonly accepted definition of what constitutes an intelligent instructional system.

Teaching "Filing Rules"--Via Computer-Aided Instruction.

ERIC Educational Resources Information Center

Agneberg, Craig

A computer software package has been developed to teach and test students on the Rules for Alphabetical Filing of the Association of Records Managers and Administrators (ARMA). The following computer assisted instruction principles were used in developing the program: gaining attention, stating objectives, providing direction, reviewing…

Computer Skill Acquisition and Retention: The Effects of Computer-Aided Self-Explanation

ERIC Educational Resources Information Center

Chi, Tai-Yin

2016-01-01

This research presents an experimental study to determine to what extent computer skill learners can benefit from generating self-explanation with the aid of different computer-based visualization technologies. Self-explanation was stimulated with dynamic visualization (Screencast), static visualization (Screenshot), or verbal instructions only,…

THE COMPUTER AS AN AID TO INSTRUCTION AND GUIDANCE IN THE SCHOOL.

ERIC Educational Resources Information Center

IMPELLITTERI, JOSEPH T.

COMPUTER APPLICATIONS IN EDUCATION ARE DISCUSSED IN TERMS OF--(1) A DESCRIPTION OF COMPUTER-ASSISTED INSTRUCTION (CAI) AND COUNSELING, (2) THE NUMBER AND TYPES OF COMPUTER-ASSISTED DEVELOPMENTS, (3) THE NATURE OF THE PENN STATE UNIVERSITY PROGRAM, (4) TENTATIVE RESULTS OF EXPERIMENTATION USING CAI, AND (5) IMPLICATIONS AND PROJECTIONS FOR THE…

A Computer Based Educational Aid for the Instruction of Combat Modeling

DTIC Science & Technology

1992-02-27

representation (36:363-370), and, as Knuth put it, "An algorithm must be seen to be believed" (23:4). Graphics not only aid in achieving instructional...consisted primarily of research, identification and use of existing combat model computer algorithms , interviews, and use of operation research...to-air combat models’ operating manuals provided valuable insight into pro- gram structure and algorithms used to represent the combat. From these

Modelling of Molecular Structures and Properties. Proceedings of the International Meeting of Physical Chemistry on Modeling of Molecular Structures and Properties in Physical Chemistry and Biophysics Organized by the Division de Chimie Physique of the Societe Francaise de Chimie Held in Nancy, France on 11-15 September 1989

DTIC Science & Technology

1990-01-01

expert systems, "intelligent" computer-aided instruction , symbolic learning . These aspects will be discussed, focusing on the specific problems the...VLSI chips) according to preliminary specifications. Finally ES are also used in computer-aided instruction (CAI) due to their ability of... instructions to process controllers), academic teaching (for mathematics , physics, foreign language, etc.). Domains of application The different

Application of Adaptive Decision Aiding Systems to Computer-Assisted Instruction. Final Report, January-December 1974.

ERIC Educational Resources Information Center

May, Donald M.; And Others

The minicomputer-based Computerized Diagnostic and Decision Training (CDDT) system described combines the principles of artificial intelligence, decision theory, and adaptive computer assisted instruction for training in electronic troubleshooting. The system incorporates an adaptive computer program which learns the student's diagnostic and…

A Survey and Analysis of Military Computer-Based Training Systems: A Two Part Study. Volume I: A Survey and Annotated Bibliography of Authoring Aids for Instructional Systems Development.

ERIC Educational Resources Information Center

Logan, Robert S.

The authoring process and authoring aids which facilitate development of instructional materials have recently emerged as an area of concern in the field of instructional systems development (ISD). This process includes information gathering, its conversion to learning packages, its revision, and its formal publication. The purpose of this…

A Prototype of Pilot Knowledge Evaluation by an Intelligent CAI (Computer -Aided Instruction) System Using a Bayesian Diagnostic Model.

DTIC Science & Technology

1987-06-01

to a field of research called Computer-Aided Instruction (CAI). CAI is a powerful methodology for enhancing the overall quaiity and effectiveness of...provides a very powerful tool for statistical inference, especially when pooling informations from different source is appropriate. Thus. prior...04 , 2 ’ .. ."k, + ++ ,,;-+-,..,,..v ->’,0,,.’ I The power of the model lies in its ability to adapt a diagnostic session to the level of knowledge

Computer-aided vs. tutor-delivered teaching of exposure therapy for phobia/panic: randomized controlled trial with pre-registration nursing students.

PubMed

Gega, L; Norman, I J; Marks, I M

2007-03-01

Exposure therapy is effective for phobic anxiety disorders (specific phobias, agoraphobia, social phobia) and panic disorder. Despite their high prevalence in the community, sufferers often get no treatment or if they do, it is usually after a long delay. This is largely due to the scarcity of healthcare professionals trained in exposure therapy, which is due, in part, to the high cost of training. Traditional teaching methods employed are labour intensive, being based mainly on role-play in small groups with feedback and coaching from experienced trainers. In an attempt to increase knowledge and skills in exposure therapy, there is now some interest in providing relevant teaching as part of pre-registration nurse education. Computers have been developed to teach terminology and simulate clinical scenarios for health professionals, and offer a potentially cost effective alternative to traditional teaching methods. To test whether student nurses would learn about exposure therapy for phobia/panic as well by computer-aided self-instruction as by face-to-face teaching, and to compare the individual and combined effects of two educational methods, traditional face-to-face teaching comprising a presentation with discussion and questions/answers by a specialist cognitive behaviour nurse therapist, and a computer-aided self-instructional programme based on a self-help programme for patients with phobia/panic called FearFighter, on students' knowledge, skills and satisfaction. Randomised controlled trial, with a crossover, completed in 2 consecutive days over a period of 4h per day. Ninety-two mental health pre-registration nursing students, of mixed gender, age and ethnic origin, with no previous training in cognitive behaviour therapy studying at one UK university. The two teaching methods led to similar improvements in knowledge and skills, and to similar satisfaction, when used alone. Using them in tandem conferred no added benefit. Computer-aided self-instruction was more efficient as it saved teacher preparation and delivery time, and needed no specialist tutor. Computer-aided self-instruction saved almost all preparation time and delivery effort for the expert teacher. When added to past results in medical students, the present results in nurses justify the use of computer-aided self-instruction for learning about exposure therapy and phobia/panic and of research into its value for other areas of health education.

Computer Aided Statistics Instruction Protocol (CASIP) Restructuring Undergraduate Statistics in Psychology: An Integration of Computers into Instruction and Evaluation.

ERIC Educational Resources Information Center

Rah, Ki-Young; Scuello, Michael

As a result of the development of two computer statistics laboratories in the psychology department at New York's Brooklyn College, a project was undertaken to develop and implement computer program modules in undergraduate and graduate statistics courses. Rather than use the technology to merely make course presentations more exciting, the…

A Computer-Based, Interactive Videodisc Job Aid and Expert System for Electron Beam Lithography Integration and Diagnostic Procedures.

ERIC Educational Resources Information Center

Stevenson, Kimberly

This master's thesis describes the development of an expert system and interactive videodisc computer-based instructional job aid used for assisting in the integration of electron beam lithography devices. Comparable to all comprehensive training, expert system and job aid development require a criterion-referenced systems approach treatment to…

Feedback and its effectiveness in a computer-aided personalized system of instruction course.

PubMed Central

Martin, Toby L; Pear, Joseph J; Martin, Garry L

2002-01-01

In a computer-managed version of Keller's personalized system of instruction, students received frequent feedback from more advanced students within the course. Overall accuracy of student-provided feedback was 87%, and students complied with 61% of the feedback. PMID:12555917

Computer Aided Instruction in Teaching Program Evaluation.

ERIC Educational Resources Information Center

Dowell, David A.; Binette, Holly A. Lizotte

This paper reports the results of two semesters of experience using computer-assisted instruction (CAI) to teach topics in program evaluation to undergraduate and graduate psychology students at California State University, Long Beach. (The topics addressed are models of evaluation, evaluability assessment, needs assessment, experimental and…

An Investigation of the Use of Computer-Aided-Instruction in Teaching Students How to Solve Selected Multistep General Chemistry Problems.

ERIC Educational Resources Information Center

Grandey, Robert C.

The development of computer-assisted instructional lessons on the following three topics is discussed: 1) the mole concept and chemical formulas, 2) concentration of solutions and quantities from chemical equations, and 3) balancing equations for oxidation-reduction reactions. Emphasis was placed on developing computer routines which interpret…

Longitudinal Study of Factors Impacting the Implementation of Notebook Computer Based CAD Instruction

ERIC Educational Resources Information Center

Goosen, Richard F.

2009-01-01

This study provides information for higher education leaders that have or are considering conducting Computer Aided Design (CAD) instruction using student owned notebook computers. Survey data were collected during the first 8 years of a pilot program requiring engineering technology students at a four year public university to acquire a notebook…

NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Handler, B.H.; France, P.A.; Frey, S.C.

Data Systems Engineering Organization (DSEO) personnel developed a prototype computer aided instruction CAI system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project was to provide a CAI prototype that could be used as an enhancement to existing NALDA training. The CAI prototype project was performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. The findings from Phase I are documented in Recommended CAI Approach for the NALDA System (Duncan et al., 1987). Inmore » Phase II, a structured design and specifications were developed, and a prototype CAI system was created. A report, NALDA CAI Prototype: Phase II Final Report, was written to record the findings and results of Phase II. NALDA CAI: Recommendations for an Advanced Instructional Model, is comprised of related papers encompassing research on computer aided instruction CAI, newly developing training technologies, instructional systems development, and an Advanced Instructional Model. These topics were selected because of their relevancy to the CAI needs of NALDA. These papers provide general background information on various aspects of CAI and give a broad overview of new technologies and their impact on the future design and development of training programs. The paper within have been index separately elsewhere.« less

Training Aids for Online Instruction: An Analysis.

ERIC Educational Resources Information Center

Guy, Robin Frederick

This paper describes a number of different types of training aids currently employed in online training: non-interactive audiovisual presentations; interactive computer-based aids; partially interactive aids based on recorded searches; print-based materials; and kits. The advantages and disadvantages of each type of aid are noted, and a table…

The effects of computer-aided design software on engineering students' spatial visualisation skills

NASA Astrophysics Data System (ADS)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

Computer-Aided Authoring of Programmed Instruction for Teaching Symbol Recognition. Final Report.

ERIC Educational Resources Information Center

Braby, Richard; And Others

This description of AUTHOR, a computer program for the automated authoring of programmed texts designed to teach symbol recognition, includes discussions of the learning strategies incorporated in the design of the instructional materials, hardware description and the algorithm for the software, and current and future developments. Appendices…

Siren Songs and a Skeptic.

ERIC Educational Resources Information Center

O'Brien, George M.

This paper reports on an on-going experiment in computer-aided language instruction. In 1972, a class of beginning German students at the Duluth campus of the University of Minnesota volunteered to test two pedagogic theories: (1) Could a computer-aided course be used by a class and an instructor who knew nothing of computers and who had to rely…

Computer Aided Instruction (CAI) for the Shipboard Nontactical ADP Program (SNAP). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, L.D.; Hammons, C.E.; Hume, R.

Oak Ridge National Laboratory is developing a prototype computer aided instruction package for the Navy Management Systems Support Office. This report discusses the background of the project and the progress to date including a description of the software design, problems encountered, solutions found, and recommendations. The objective of this project is to provide a prototype that will enhance training and can be used as a shipboard refresher and retraining tool. The prototype system will be installed onboard ships where Navy personnel will have ready access to the training. The subsequent testing and evaluation of the prototype could provide the basismore » for a Navy-wide effort to implement computer aided instruction. The work to date has followed a rigorous structured analysis methodology based on the Yourdon/DeMarco techniques. A set of data flow diagrams and a data dictionary are included in the appendices. The problems encountered revolve around requirements to use existing hardware, software, and programmer capabilities for development, implementation, and maintenance of the instructional software. Solutions have been developed which will allow the software to exist in the given environment and still provide advanced features not available in commercial courses.« less

Low-cost Computer-Aided Instruction/Computer-Managed Instruction (CAI/ CMI) System: Feasibility Study

DTIC Science & Technology

1979-12-01

capabilities that are not essential to routine support of the majority of Air Force training. TABLE OF CONTENTS PAGE 1.0 INTRODUCTION ...66 APPEINDIX A Listing of All Survey Items ---------------------- 67 APPENDIX B Introduction to Survey Form and...5 6 1.0 INTRODUCTION Prototype computer-based individualized training systems have been developed and implemented at a number of

The Use of Computers to Aid Instruction in Beginning Chemistry

ERIC Educational Resources Information Center

Grandey, Robert C.

1971-01-01

Describes computer-aided lessons for determining chemical formulas from composition by weight, quantities from chemical equations, and balancing equations for oxidation-reduction reactions. Lessons were developed and used on the PLATO system at the University of Illinois. A brief analysis of student attitudes and of effectiveness of the programs…

An Approach to Providing a User Interface for Military Computer-Aided-Instruction in 1980.

ERIC Educational Resources Information Center

Gallenson, Louis

A recent needs study determined that most of the terminal requirements for military computer assisted instruction (CAI) applications can be satisfied with mainstream commercial terminals. Additional development, however, is likely to be required to satisfy two of the capabilities (limited graphics and prerecorded visuals). The expected…

Evaluation of a Text Compression Algorithm Against Computer-Aided Instruction (CAI) Material.

ERIC Educational Resources Information Center

Knight, Joseph M., Jr.

This report describes the initial evaluation of a text compression algorithm against computer assisted instruction (CAI) material. A review of some concepts related to statistical text compression is followed by a detailed description of a practical text compression algorithm. A simulation of the algorithm was programed and used to obtain…

Alternative Delivery Systems for the Computer-Aided Instruction Study Management System (CAISMS).

ERIC Educational Resources Information Center

Nievergelt, Jurg; And Others

The Computer-Assisted Instruction Study Management System (CAISMS) was developed and implemented on the PLATO system to monitor and guide student study of text materials. It administers assignments, gives quizzes, and automatically keeps track of a student's progress. This report describes CAISMS and several hypothetical implementations of CAISMS…

Computer-Assisted Instruction to Teach DOS Commands: A Pilot Study.

ERIC Educational Resources Information Center

McWeeney, Mark G.

1992-01-01

Describes a computer-assisted instruction (CAI) program used to teach DOS commands. Pretest and posttest results for 65 graduate students using the program are reported, and it is concluded that the CAI program significantly aided the students. Sample screen displays for the program and several questions from the pre/posttest are included. (nine…

A Guide to Courseware Authoring Options in ESL/FL Instruction.

ERIC Educational Resources Information Center

Hampson, S. L.

A guide to courseware authoring aids for computer-assisted language instruction (CALIS) gives suggestions for the selection and use of programing options and provides an annotated listing of those options. Introductory sections discuss the use of computer-assisted language teaching, the selection of quality courseware, the types of authoring aids…

Use of an Automatic Problem Generator to Teach Basic Skills in a First Course in Assembly Language.

ERIC Educational Resources Information Center

Benander, Alan; And Others

1989-01-01

Discussion of the use of computer aided instruction (CAI) and instructional software in college level courses highlights an automatic problem generator, AUTOGEN, that was written for computer science students learning assembly language. Design of the software is explained, and student responses are reported. (nine references) (LRW)

Improved Computer-Aided Instruction by the Use of Interfaced Random-Access Audio-Visual Equipment. Report on Research Project No. P/24/1.

ERIC Educational Resources Information Center

Bryce, C. F. A.; Stewart, A. M.

A brief review of the characteristics of computer assisted instruction and the attributes of audiovisual media introduces this report on a project designed to improve the effectiveness of computer assisted learning through the incorporation of audiovisual materials. A discussion of the implications of research findings on the design and layout of…

Computer Aided Self-Instruction Training with Impulsive Deaf Students and Learning Disabled Students: A Study on Teaching Reflective Thought. Education and Technology Series.

ERIC Educational Resources Information Center

Campbell, Donald S.; And Others

Two studies examined the effectiveness of self-instruction training via a specially developed computer program to modify the impulsive problem-solving behavior of 16 deaf and 10 learning disabled (aphasic) adolescents attending two special residential schools in Canada. In the control condition, students learned the Apple LOGO computing language…

A Research Study of Computer-Based Tutoring of Mathematical and Scientific Knowledge. Final Technical Report.

ERIC Educational Resources Information Center

Goldstein, Ira

Computer coaching of students as an aid in problem-solving instruction is discussed. This report describes an advanced form of computer-assisted instruction that must not only present the material to be taught, but also analyze the student's responses. The program must decide whether to intervene and how much to say to a pupil based on its…

Effect of computer-aided instruction versus traditional modes on student PT's learning musculoskeletal special tests

NASA Astrophysics Data System (ADS)

Ford, Gregory Scott

2007-12-01

Title. Effect of computer-aided instruction versus traditional modes on student PT's learning musculoskeletal special tests. Problem. Lack of quantitative evidence to support the use of computer-aided instruction (CAI) in PT education for both the cognitive and psychomotor domains and lack of qualitative support as to an understanding why CAI may or may not be effective. Design. 3 group single-blind pre-test, immediate post-test, final post-test repeated measures with qualitative survey for the CAI group. Methods. Subjects were randomly assigned to CAI, live demonstration or textbook learning groups. Three novel special tests were instructed. Analysis of performance on written and practical examinations was conducted across the 3 repeated measures. A qualitative survey was completed by the CAI group post intervention. Results. CAI is equally as effective as live demonstration and textbook learning of musculoskeletal special tests in the cognitive domain, however, CAI was superior to live demonstration and textbook instruction at final post-testing. Significance. The significance of this research is that a gap in the literature of PT education needs to be bridged as it pertains to the effect of CAI on learning in both the cognitive and psychomotor domains as well as attempt to understand why CAI results in certain student performance. The methods of this study allowed for a wide range of generalizability to any and all PT programs across the country.

Learning and Optimization of Cognitive Capabilities. Final Project Report.

ERIC Educational Resources Information Center

Lumsdaine, A.A.; And Others

The work of a three-year series of experimental studies of human cognition is summarized in this report. Proglem solving and learning in man-machine interaction was investigated, as well as relevant variables and processes. The work included four separate projects: (1) computer-aided problem solving, (2) computer-aided instruction techniques, (3)…

Analyzing Automated Instructional Systems: Metaphors from Related Design Professions.

ERIC Educational Resources Information Center

Jonassen, David H.; Wilson, Brent G.

Noting that automation has had an impact on virtually every manufacturing and information operation in the world, including instructional design (ID), this paper suggests three basic metaphors for automating instructional design activities: (1) computer-aided design and manufacturing (CAD/CAM) systems; (2) expert system advisor systems; and (3)…

An Instructor's Diagnostic Aid for Feedback in Training.

ERIC Educational Resources Information Center

Andrews, Dee H.; Uliano, Kevin C.

1988-01-01

Instructor's Diagnostic Aid for Feedback in Training (IDAFT) is a computer-assisted method based on error analysis, domains of learning, and events of instruction. Its use with Navy team instructors is currently being explored. (JOW)

Functional Specifications for Computer Aided Training Systems Development and Management (CATSDM) Support Functions. Final Report.

ERIC Educational Resources Information Center

Hughes, John; And Others

This report provides a description of a Computer Aided Training System Development and Management (CATSDM) environment based on state-of-the-art hardware and software technology, and including recommendations for off the shelf systems to be utilized as a starting point in addressing the particular systematic training and instruction design and…

User's manual: Computer-aided design programs for inductor-energy-storage dc-to-dc electronic power converters

NASA Technical Reports Server (NTRS)

Huffman, S.

1977-01-01

Detailed instructions on the use of two computer-aided-design programs for designing the energy storage inductor for single winding and two winding dc to dc converters are provided. Step by step procedures are given to illustrate the formatting of user input data. The procedures are illustrated by eight sample design problems which include the user input and the computer program output.

Computer aided field editing in the DHS context: the Turkey experiment.

PubMed

Cushing, J; Loaiza, E

1994-01-01

"In this study two types of field editing used during the Turkey Demographic and Health Survey are compared. These two types of editing are computer aided field editing and manual editing. It is known that manual editing by field editors is a tedious job in which errors especially on skip questions can be missed; however, with the aid of computers field editors could quickly find all occasions on which an interviewer incorrectly followed a skip instruction. At the end of the experiment it has been found...that the field editing done with the aid of a notebook computer was consistently better than that done in the standard manual manner." (SUMMARY IN TUR) excerpt

Teachers of Advertising Media Courses Describe Techniques, Show Computer Applications.

ERIC Educational Resources Information Center

Lancaster, Kent M.; Martin, Thomas C.

1989-01-01

Reports on a survey of university advertising media teachers regarding textbooks and instructional aids used, teaching techniques, computer applications, student placement, instructor background, and faculty publishing. (SR)

INDIVIDUALIZING UNIVERSITY INSTRUCTION, EXPLORING COMPUTER POTENTIAL TO AID COLLEGE TEACHERS BY DIRECTING THE LEARNING PROCESS. INTER-UNIVERSITY PROJECT ONE, PUBLICATIONS SERIES.

ERIC Educational Resources Information Center

FALL, CHARLES R.

THIS DOCUMENT CONCLUDES THAT INSTRUCTION BY COMPUTER-BASED RESOURCE UNITS CAN FACILITATE LEARNING AND PROVIDE THE INSTRUCTOR WITH VALUABLE ASSISTANCE. BY PRE-PLANNING THE TEACHING-LEARNING SITUATION, RESOURCE UNITS CAN FREE THE INSTRUCTOR FOR DECISION-MAKING TASKS. RESOURCE UNITS CAN ALSO PROVIDE APPROPRIATE LEARNING GOALS AND STUDY GUIDES TO EACH…

CAD/CAM at a Distance: Assessing the Effectiveness of Web-Based Instruction To Meet Workforce Development Needs. AIR 2000 Annual Forum Paper.

ERIC Educational Resources Information Center

Wilkerson, Joyce A.; Elkins, Susan A.

This qualitative case study assessed web-based instruction in a computer-aided design/computer-assisted manufacturing (CAD/CAM) course designed for workforce development. The study examined students' and instructors' experience in a CAD/CAM course delivered exclusively on the Internet, evaluating course content and delivery, clarity of…

Why Information Technologies Fail.

ERIC Educational Resources Information Center

Gayeski, Diane M.

1989-01-01

Discusses successes and failures in the field of instructional technology and suggests methods to design more appropriate systems that would present fewer barriers to adoption. Topics discussed include educational television; videotext; video technology; audiovisual aids; teleconferencing; computer assisted instruction; interactive video; CD-ROM;…

BOLD VENTURE COMPUTATION SYSTEM for nuclear reactor core analysis, Version III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vondy, D.R.; Fowler, T.B.; Cunningham, G.W. III.

1981-06-01

This report is a condensed documentation for VERSION III of the BOLD VENTURE COMPUTATION SYSTEM for nuclear reactor core analysis. An experienced analyst should be able to use this system routinely for solving problems by referring to this document. Individual reports must be referenced for details. This report covers basic input instructions and describes recent extensions to the modules as well as to the interface data file specifications. Some application considerations are discussed and an elaborate sample problem is used as an instruction aid. Instructions for creating the system on IBM computers are also given.

A multimedia adult literacy program: Combining NASA technology, instructional design theory, and authentic literacy concepts

NASA Technical Reports Server (NTRS)

Willis, Jerry W.

1993-01-01

For a number of years, the Software Technology Branch of the Information Systems Directorate has been involved in the application of cutting edge hardware and software technologies to instructional tasks related to NASA projects. The branch has developed intelligent computer aided training shells, instructional applications of virtual reality and multimedia, and computer-based instructional packages that use fuzzy logic for both instructional and diagnostic decision making. One outcome of the work on space-related technology-supported instruction has been the creation of a significant pool of human talent in the branch with current expertise on the cutting edges of instructional technologies. When the human talent is combined with advanced technologies for graphics, sound, video, CD-ROM, and high speed computing, the result is a powerful research and development group that both contributes to the applied foundations of instructional technology and creates effective instructional packages that take advantage of a range of advanced technologies. Several branch projects are currently underway that combine NASA-developed expertise to significant instructional problems in public education. The branch, for example, has developed intelligent computer aided software to help high school students learn physics and staff are currently working on a project to produce educational software for young children with language deficits. This report deals with another project, the adult literacy tutor. Unfortunately, while there are a number of computer-based instructional packages available for adult literacy instruction, most of them are based on the same instructional models that failed these students when they were in school. The teacher-centered, discrete skill and drill-oriented, instructional strategies, even when they are supported by color computer graphics and animation, that form the foundation for most of the computer-based literacy packages currently on the market may not be the most effective or most desirable way to use computer technology in literacy programs. This project is developing a series of instructional packages that are based on a different instructional model - authentic instruction. The instructional development model used to create these packages is also different. Instead of using the traditional five stage linear, sequential model based on behavioral learning theory, the project uses the recursive, reflective design and development model (R2D2) that is based on cognitive learning theory, particularly the social constructivism of Vygotsky, and an epistemology based on critical theory. Using alternative instructional and instructional development theories, the result of the summer faculty fellowship is LiteraCity, a multimedia adult literacy instructional package that is a simulation of finding and applying for a job. The program, which is about 120 megabytes, is distributed on CD-ROM.

Transforming information for computer-aided instruction: using a Socratic Dialogue method to teach gross anatomy.

PubMed

Constantinou, P; Daane, S; Dev, P

1994-01-01

Traditional teaching of anatomy can be a difficult process of rote memorization. Computers allow information presentation to be much more dynamic, and interactive; the same information can be presented in multiple organizations. Using this idea, we have implemented a new pedagogy for computer-assisted instruction in The Anatomy Lesson, an interactive digital teacher which uses a "Socratic Dialogue" metaphor, as well as a textbook-like approach, to facilitate conceptual learning in anatomy.

Effectiveness of a computer-based tutorial for teaching how to make a blood smear.

PubMed

Preast, Vanessa; Danielson, Jared; Bender, Holly; Bousson, Maury

2007-09-01

Computer-aided instruction (CAI) was developed to teach veterinary students how to make blood smears. This instruction was intended to replace the traditional instructional method in order to promote efficient use of faculty resources while maintaining learning outcomes and student satisfaction. The purpose of this study was to evaluate the effect of a computer-aided blood smear tutorial on 1) instructor's teaching time, 2) students' ability to make blood smears, and 3) students' ability to recognize smear quality. Three laboratory sessions for senior veterinary students were taught using traditional methods (control group) and 4 sessions were taught using the CAI tutorial (experimental group). Students in the control group received a short demonstration and lecture by the instructor at the beginning of the laboratory and then practiced making blood smears. Students in the experimental group received their instruction through the self-paced, multimedia tutorial on a laptop computer and then practiced making blood smears. Data was collected from observation, interview, survey questionnaires, and smear evaluation by students and experts using a scoring rubric. Students using the CAI made better smears and were better able to recognize smear quality. The average time the instructor spent in the room was not significantly different between groups, but the quality of the instructor time was improved with the experimental instruction. The tutorial implementation effectively provided students and instructors with a teaching and learning experience superior to the traditional method of instruction. Using CAI is a viable method of teaching students to make blood smears.

Motivation in computer-assisted instruction.

PubMed

Hu, Amanda; Shewokis, Patricia A; Ting, Kimberly; Fung, Kevin

2016-08-01

Computer-aided instruction (CAI) is defined as instruction in which computers play a central role as the means of information delivery and direct interaction with learners. Computer-aided instruction has become mainstream in medical school curricula. For example, a three-dimensional (3D) computer module of the larynx has been created to teach laryngeal anatomy. Although the novelty and educational potential of CAI has garnered much attention, these new technologies have been plagued with low utilization rates. Several experts attribute this problem to lack of motivation in students. Motivation is defined as the desire and action toward goal-oriented behavior. Psychologist Dr. John Keller developed the ARCS theory of motivational learning, which proposed four components: attention (A), relevance (R), concentration (C), and satisfaction (S). Keller believed that motivation is not only an innate characteristic of the pupil; it can also be influenced by external factors, such as the instructional design of the curriculum. Thus, understanding motivation is an important step to designing CAI appropriately. Keller also developed a 36-item validated instrument called the Instructional Materials Motivation Survey (IMMS) to measure motivation. The objective of this study was to study motivation in CAI. Medical students learning anatomy with the 3D computer module will have higher laryngeal anatomy test scores and higher IMMS motivation scores. Higher anatomy test scores will be positively associated with higher IMMS scores. Prospective, randomized, controlled trial. After obtaining institutional review board approval, 100 medical students (mean age 25.5 ± 2.5, 49% male) were randomized to either the 3D computer module (n = 49) or written text (n = 51). Information content was identical in both arms. Students were given 30 minutes to study laryngeal anatomy and then completed the laryngeal anatomy test and IMMS. Students were categorized as either junior (year 1 and 2) or senior (year 3 and 4). There were no significant differences in anatomy scores based on educational modality. There was significant interaction of educational modality by year [F(1,96) = 4.12, P = 0.045, ω(2)  = 0.031]. For the total score, there was a significant effect of year [F(1,96) = 22.28, P < 0.001, ω(2)  = 0.178], with seniors (15.4 ± 2.6) scoring significantly higher than juniors (12.8 ± 3.1). For the motivational score, the total IMMS score had two significant effects. With educational modality [F(1,96) = 5.18, P = 0.025, ω(2)  = 0.041], the 3D group (12.4 ± 2.8) scored significantly higher than the written text group (11.7 ± 3.2). With year [F(1,96) = 25.31, P < 0.001, ω(2)  = 0.198], seniors (13.4 ± 3.0) scored significantly higher than juniors (10.8 ± 2.5). Pearson's correlation showed positive associations (r = 0.22-0.91) between anatomy scores and IMMS motivation scores (P < 0.05). Computer-aided instruction conferred no measurable educational benefit over traditional written text in medical students; however, CAI was associated with higher motivational levels. Computer-aided instruction was found to have a greater positive impact on senior medical students with higher anatomy and motivational scores. Higher anatomy scores were positively associated with higher motivational scores. Computer-aided instruction may be better targeted toward senior students. N/A. Laryngoscope, 126:S5-S13, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Computer Instructional Aids for Undergraduate Control Education. 1978 Edition.

ERIC Educational Resources Information Center

Volz, Richard A.; And Others

This work represents the development of computer tools for undergraduate students. Emphasis is on automatic control theory using hybrid and digital computation. The routine calculations of control system analysis are presented as students would use them on the University of Michigan's central digital computer and the time-shared graphic terminals…

Transforming information for computer-aided instruction: using a Socratic Dialogue method to teach gross anatomy.

PubMed Central

Constantinou, P.; Daane, S.; Dev, P.

1994-01-01

Traditional teaching of anatomy can be a difficult process of rote memorization. Computers allow information presentation to be much more dynamic, and interactive; the same information can be presented in multiple organizations. Using this idea, we have implemented a new pedagogy for computer-assisted instruction in The Anatomy Lesson, an interactive digital teacher which uses a "Socratic Dialogue" metaphor, as well as a textbook-like approach, to facilitate conceptual learning in anatomy. Images Figure 1 PMID:7949881

The Role of the Computer in Education. Proceedings of the Annual Meeting (7th, Arlington Heights, Illinois, February 18-20, 1987).

ERIC Educational Resources Information Center

Micro-Ideas, Glenview, IL.

The 47 papers in these proceedings describe computer technology and its many applications to the educational process. Topics discussed include computer literacy, networking, word processing, automated instructional management, computer conferencing, career information services, computer-aided drawing/design, and robotics. Programming languages…

Memory interface simulator: A computer design aid

NASA Technical Reports Server (NTRS)

Taylor, D. S.; Williams, T.; Weatherbee, J. E.

1972-01-01

Results are presented of a study conducted with a digital simulation model being used in the design of the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. The model simulates the activity involved as instructions are fetched from random access memory for execution in one of the system central processing units. A series of model runs measured instruction execution time under various assumptions pertaining to the CPU's and the interface between the CPU's and RAM. Design tradeoffs are presented in the following areas: Bus widths, CPU microprogram read only memory cycle time, multiple instruction fetch, and instruction mix.

Intelligent computer-aided training authoring environment

NASA Technical Reports Server (NTRS)

Way, Robert D.

1994-01-01

Although there has been much research into intelligent tutoring systems (ITS), there are few authoring systems available that support ITS metaphors. Instructional developers are generally obliged to use tools designed for creating on-line books. We are currently developing an authoring environment derived from NASA's research on intelligent computer-aided training (ICAT). The ICAT metaphor, currently in use at NASA has proven effective in disciplines from satellite deployment to high school physics. This technique provides a personal trainer (PT) who instructs the student using a simulated work environment (SWE). The PT acts as a tutor, providing individualized instruction and assistance to each student. Teaching in an SWE allows the student to learn tasks by doing them, rather than by reading about them. This authoring environment will expedite ICAT development by providing a tool set that guides the trainer modeling process. Additionally, this environment provides a vehicle for distributing NASA's ICAT technology to the private sector.

Using Computer Technology To Aid the Disabled Reader.

ERIC Educational Resources Information Center

Balajthy, Ernest

When matched for achievement level and educational objectives, computer technology can be particularly effective with at-risk students. Computer-assisted instructional software is the most widely available type of software. An exciting development pertinent to literacy education is the development of the "electronic book" (also called…

Mechanical Drafting with CAD. Teacher Edition.

ERIC Educational Resources Information Center

McClain, Gerald R.

This instructor's manual contains 13 units of instruction for a course on mechanical drafting with options for using computer-aided drafting (CAD). Each unit includes some or all of the following basic components of a unit of instruction: objective sheet, suggested activities for the teacher, assignment sheets and answers to assignment sheets,…

Intelligent CAI: An Author Aid for a Natural Language Interface.

ERIC Educational Resources Information Center

Burton, Richard R.; Brown, John Seely

This report addresses the problems of using natural language (English) as the communication language for advanced computer-based instructional systems. The instructional environment places requirements on a natural language understanding system that exceed the capabilities of all existing systems, including: (1) efficiency, (2) habitability, (3)…

Web-Based Learning and Instruction Support System for Pneumatics

ERIC Educational Resources Information Center

Yen, Chiaming; Li, Wu-Jeng

2003-01-01

This research presents a Web-based learning and instructional system for Pneumatics. The system includes course material, remote data acquisition modules, and a pneumatic laboratory set. The course material is in the HTML format accompanied with text, still and animated images, simulation programs, and computer aided design tools. The data…

Headsprout Early Reading for Students at Risk for Reading Failure

ERIC Educational Resources Information Center

Kreskey, Donna D.

2012-01-01

This study examined the efficacy of using Headsprout Early Reading (Headsprout, 2007) to supplement a balanced literacy curriculum for kindergarten and first grade students in a suburban public school system. Headsprout, which is an example of computer aided instruction (CAI), provided internet-based, supplemental reading instruction that…

Teaching Drafting 101: What Comes First?

ERIC Educational Resources Information Center

Carkhuff, Don

2006-01-01

Employers require pristine drawings that convey clarity and precision for the production of goods. Can a change in sequence of instruction be expeditious and help teachers better prepare their students for the workplace? Research suggests that combining traditional drafting and computer-aided drafting (CAD) instruction makes sense. It is analogous…

Computer Support of Operator Training: Constructing and Testing a Prototype of a CAL (Computer Aided Learning) Supported Simulation Environment.

ERIC Educational Resources Information Center

Zillesen, P. G. van Schaick; And Others

Instructional feedback given to the learners during computer simulation sessions may be greatly improved by integrating educational computer simulation programs with hypermedia-based computer-assisted learning (CAL) materials. A prototype of a learning environment of this type called BRINE PURIFICATION was developed for use in corporate training…

Advanced CNC Programming (EZ-CAM). 439-366.

ERIC Educational Resources Information Center

Casey, Joe

This document contains two units for an advanced course in computer numerical control (CNC) for computer-aided manufacturing. It is intended to familiarize students with the principles and techniques necessary to create proper CNC programs using computer software. Each unit consists of an introduction, instructional objectives, learning materials,…

System for Computer Automated Typesetting (SCAT) of Computer Authored Texts.

ERIC Educational Resources Information Center

Keeler, F. Laurence

This description of the System for Automated Typesetting (SCAT), an automated system for typesetting text and inserting special graphic symbols in programmed instructional materials created by the computer aided authoring system AUTHOR, provides an outline of the design architecture of the system and an overview including the component…

Computer-Aided Instruction in Automated Instrumentation.

ERIC Educational Resources Information Center

Stephenson, David T.

1986-01-01

Discusses functions of automated instrumentation systems, i.e., systems which combine electrical measuring instruments and a controlling computer to measure responses of a unit under test. The computer-assisted tutorial then described is programmed for use on such a system--a modern microwave spectrum analyzer--to introduce engineering students to…

Presentation Software and the Single Computer.

ERIC Educational Resources Information Center

Brown, Cindy A.

1998-01-01

Shows how the "Kid Pix" software and a single multimedia computer can aid classroom instruction for kindergarten through second grade. Topics include using the computer as a learning center for small groups of students; making a "Kid Pix" slide show; using it as an electronic chalkboard; and creating curriculum-related…

A Computer-Aided Instruction Program for Teaching the TOPS20-MM Facility on the DDN (Defense Data Network)

DTIC Science & Technology

1988-06-01

Continue on reverse if necessary and identify by block number) FIELD GROUP SUB-GROUP Computer Assisted Instruction; Artificial Intelligence 194...while he/she tries to perform given tasks. Means-ends analysis, a classic technique for solving search problems in Artificial Intelligence, has been...he/she tries to perform given tasks. Means-ends analysis, a classic technique for solving search problems in Artificial Intelligence, has been used

Development of Ideas in a GeoGebra-Aided Mathematics Instruction

ERIC Educational Resources Information Center

Ljajko, Eugen; Ibro, Vait

2013-01-01

With GeoGebra introduced into mathematics instruction the teaching/learning process is not improved in terms of speed and quality only. Mathematical concepts, rules and procedures must be adjusted to the new environment. On the other hand, characteristics of the computer and the educational software in use must be thoroughly examined and a…

The Relative Effectiveness of Training Methods for Attaining Training Objectives: Current Opinion of Training Practitioners.

ERIC Educational Resources Information Center

Shoenfelt, Elizabeth L.; And Others

This study replicated the earlier survey efforts of Carroll, Paine, and Ivancevich (1972) and Neider (1981) on the relative effectiveness among practitioners of various training methods for attaining different training objectives. Ten training methods were assessed: (1) computer aided instruction (CAI); (2) programmed instruction; (3) lecture…

Can Blended Learning Aid Foreign Language Learning?

ERIC Educational Resources Information Center

Genís Pedra, Marta; Martín de Lama, Mª Teresa

2013-01-01

There has always been a debate around the issue of what it is that improves learning: the instruction itself or the media used for it (Clark 1983; Kozma 1994). It has also been said (Kulik and Kulik 1991; Andrewartha & Wilmot 2001) that computer mediated learning, as opposed to traditional instruction, positively influences the students'…

New Media for Workers' Education and Training.

ERIC Educational Resources Information Center

Labour Education, 1995

1995-01-01

Includes "Introduction"; "Part One: Towards a New Technological System"; "Part Two: Communications and Training"; "Part Three: Production and Distribution of Media"; glossary; and 77-item bibliography. Covers the use of audiovisual aids, computer-assisted instruction, telecommunications, video, optical media, and computer networks for labor…

CNC Programming I.

ERIC Educational Resources Information Center

Casey, Joe

This document contains five units for a course in computer numerical control (CNC) for computer-aided manufacturing. It is intended to familiarize students with the principles and techniques necessary to create proper CNC programs manually. Each unit consists of an introduction, instructional objectives, learning materials, learning activities,…

The Impact of Microtechnology. A Case for Reassessing the Role of Computers in Learning.

ERIC Educational Resources Information Center

Alty, J. L.

1982-01-01

Reviews recent advances in microtechnology and describes the impact they will have on computer aided instruction and learning. It is suggested that distributed systems based on network technology will become widespread, and computer assisted guidance systems will be developed to assist new unskilled users. Eight references are given. (CHC)

Relationships among Learning Styles and Motivation with Computer-Aided Instruction in an Agronomy Course

ERIC Educational Resources Information Center

McAndrews, Gina M.; Mullen, Russell E.; Chadwick, Scott A.

2005-01-01

Multi-media learning tools were developed to enhance student learning for an introductory agronomy course at Iowa State University. During fall 2002, the new interactive computer program, called Computer Interactive Multimedia Program for Learning Enhancement (CIMPLE) was incorporated into the teaching, learning, and assessment processes of the…

Computer Aided Reading Diagnosis.

ERIC Educational Resources Information Center

McEneaney, John E.

Computer technologies are having an ever-increasing influence on educational research and practice in Russia and the United States. In Russia, a number of recent papers have focused on the application of the computer as a teaching tool and on its influence in instructional organization and planning. In the United States, there is a great deal of…

Using Microcomputers To Help Learning Disabled Student with Arithmetic Difficulties.

ERIC Educational Resources Information Center

Brevil, Margarette

The use of microcomputers to help the learning disabled increase their arithmetic skills is examined. The microcomputer should be used to aid the learning disabled student to practice the concepts taught by the teacher. Computer-aided instruction such as drill and practice may help the learning disabled student because it gives immediate feedback…

Health Science Education

ERIC Educational Resources Information Center

Hartsell, Horace C.

1970-01-01

Briefly describes several instructional techniques including computer aid simulation of the medical encounter, media-biased approaches for teaching doctor-patient relationships, and programed media for teaching decision-making to nursing students." (Author/AA)

An Interactive Computer-Aided Instructional Strategy and Assessment Methods for System Identification and Adaptive Control Laboratory

ERIC Educational Resources Information Center

Özbek, Necdet Sinan; Eker, Ilyas

2015-01-01

This study describes a set of real-time interactive experiments that address system identification and model reference adaptive control (MRAC) techniques. In constructing laboratory experiments that contribute to efficient teaching, experimental design and instructional strategy are crucial, but a process for doing this has yet to be defined. This…

Choosing a Microcomputer for Use as a Teaching Aid.

ERIC Educational Resources Information Center

Visniesky, Cheryl; Hocking, Joan

A step-by-step guide to the selection of a microcomputer system is provided for educators having made the decision to implement computer-assisted instruction. The first step is to clarify reasons for using a microcomputer rather than conventional instructional materials. Next, the degree of use (e.g., types of courses and number of departments…

Development of a Traditional/Computer-aided Graphics Course for Engineering Technology.

ERIC Educational Resources Information Center

Anand, Vera B.

1985-01-01

Describes a two-semester-hour freshman course in engineering graphics which uses both traditional and computerized instruction. Includes course description, computer graphics topics, and recommendations. Indicates that combining interactive graphics software with development of simple programs gave students a better foundation for upper-division…

Development of an Interactive Computer-Based Learning Strategy to Assist in Teaching Water Quality Modelling

ERIC Educational Resources Information Center

Zigic, Sasha; Lemckert, Charles J.

2007-01-01

The following paper presents a computer-based learning strategy to assist in introducing and teaching water quality modelling to undergraduate civil engineering students. As part of the learning strategy, an interactive computer-based instructional (CBI) aid was specifically developed to assist students to set up, run and analyse the output from a…

Program on application of communications satellites to educational development

NASA Technical Reports Server (NTRS)

Morgan, R. P.; Singh, J. P.

1971-01-01

Interdisciplinary research in needs analysis, communications technology studies, and systems synthesis is reported. Existing and planned educational telecommunications services are studied and library utilization of telecommunications is described. Preliminary estimates are presented of ranges of utilization of educational telecommunications services for 1975 and 1985; instructional and public television, computer-aided instruction, computing resources, and information resource sharing for various educational levels and purposes. Communications technology studies include transmission schemes for still-picture television, use of Gunn effect devices, and TV receiver front ends for direct satellite reception at 12 GHz. Two major studies in the systems synthesis project concern (1) organizational and administrative aspects of a large-scale instructional satellite system to be used with schools and (2) an analysis of future development of instructional television, with emphasis on the use of video tape recorders and cable television. A communications satellite system synthesis program developed for NASA is now operational on the university IBM 360-50 computer.

Computer Assisted Instruction in the Health Professions.

ERIC Educational Resources Information Center

Stolurow, Lawrence M.; And Others

Introductory remarks by staff members at Ohio State University College of Medicine, Harvard Medical School, U.S. Naval Medical School, Harvard School of Public Health, and Michigan State University explore the educational requirements of the health professions and the ways in which the computer can aid in fulfilling these requirements. Programs…

GUIDON: A Computer-Aided Instructional Program.

DTIC Science & Technology

1983-01-01

THIS PAGE (When Data Entered) GUIDON Willam L. Cancey Department of Computer Science Stanford Umversty, Stanford CA 9430 Aeassi.on 7or WTIS COW & DTIC...goal tuberculous ), GUIDON decides which of these rules, if that have succeeded is 1. and any, might have been used by the student. That is, 3) There is

Modelling and Simulation as a Recognizing Method in Education

ERIC Educational Resources Information Center

Stoffa, Veronika

2004-01-01

Computer animation-simulation models of complex processes and events, which are the method of instruction, can be an effective didactic device. Gaining deeper knowledge about objects modelled helps to plan simulation experiments oriented on processes and events researched. Animation experiments realized on multimedia computers can aid easier…

NAVSIM 2: A computer program for simulating aided-inertial navigation for aircraft

NASA Technical Reports Server (NTRS)

Bjorkman, William S.

1987-01-01

NAVSIM II, a computer program for analytical simulation of aided-inertial navigation for aircraft, is described. The description is supported by a discussion of the program's application to the design and analysis of aided-inertial navigation systems as well as instructions for utilizing the program and for modifying it to accommodate new models, constraints, algorithms and scenarios. NAVSIM II simulates an airborne inertial navigation system built around a strapped-down inertial measurement unit and aided in its function by GPS, Doppler radar, altimeter, airspeed, and position-fix measurements. The measurements are incorporated into the navigation estimate via a UD-form Kalman filter. The simulation was designed and implemented using structured programming techniques and with particular attention to user-friendly operation.

The development of a computer-assisted instruction system for clinical nursing skills with virtual instruments concepts: A case study for intra-aortic balloon pumping.

PubMed

Chang, Ching-I; Yan, Huey-Yeu; Sung, Wen-Hsu; Shen, Shu-Cheng; Chuang, Pao-Yu

2006-01-01

The purpose of this research was to develop a computer-aided instruction system for intra-aortic balloon pumping (IABP) skills in clinical nursing with virtual instrument (VI) concepts. Computer graphic technologies were incorporated to provide not only static clinical nursing education, but also the simulated function of operating an expensive medical instrument with VI techniques. The content of nursing knowledge was adapted from current well-accepted clinical training materials. The VI functions were developed using computer graphic technology with photos of real medical instruments taken by digital camera. We wish the system could provide beginners of nursing education important teaching assistance.

An Interaction of Screen Colour and Lesson Task in CAL

ERIC Educational Resources Information Center

Clariana, Roy B.

2004-01-01

Colour is a common feature in computer-aided learning (CAL), though the instructional effects of screen colour are not well understood. This investigation considers the effects of different CAL study tasks with feedback on posttest performance and on posttest memory of the lesson colour scheme. Graduate students (n=68) completed a computer-based…

An Evaluation of Computer-Managed Education Technology at New York City Community College.

ERIC Educational Resources Information Center

Chitayat, Linda

The Computer-Managed Education Technology (COMET) program was designed to improve group instruction through the use of technological aids in the classroom. Specific objectives included: (1) improving feedback on student comprehension during a class period; (2) facilitating the administration and grading of homework and quizzes; (3) providing for…

Computers as Instructional Aids.

ERIC Educational Resources Information Center

Wright, Anne

The use of microcomputers as word processors for writing papers is commonplace in English departments, but there are many less well-known uses that English teachers can make of the computer. For example, word processing programs can be used to teach sentence combining. Moving text on the screen is very easy, so it is possible to rearrange words or…

Creating Gender Parity: An Instruction Aide's Influence

ERIC Educational Resources Information Center

Lester, Cynthia Y.; Brown, Marcus

2004-01-01

The decline in the number of women in computing disciplines has been attributed to different causes, and research on the decline continues to grow. While there are numerous reasons suggested for the imbalance in these disciplines, the perceptions that women hold about their computing capabilities continue to be of interest. The current study…

Using Software Tools to Automate the Assessment of Student Programs.

ERIC Educational Resources Information Center

Jackson, David

1991-01-01

Argues that advent of computer-aided instruction (CAI) systems for teaching introductory computer programing makes it imperative that software be developed to automate assessment and grading of student programs. Examples of typical student programing problems are given, and application of the Unix tools Lex and Yacc to the automatic assessment of…

Dr. Sanger's Apprentice: A Computer-Aided Instruction to Protein Sequencing.

ERIC Educational Resources Information Center

Schmidt, Thomas G.; Place, Allen R.

1985-01-01

Modeled after the program "Mastermind," this program teaches students the art of protein sequencing. The program (written in Turbo Pascal for the IBM PC, requiring 128K, a graphics adapter, and an 8070 mathematics coprocessor) generates a polypeptide whose sequence and length can be user-defined (for practice) or computer-generated (for…

Using Articulate Virtual Laboratories in Teaching Energy Conversion at the U.S. Naval Academy.

ERIC Educational Resources Information Center

Wu, C.

1998-01-01

The Mechanical Engineering Department at the U.S. Naval Academy is currently evaluating a new teaching method which uses computer software. Utilizing the thermodynamic-based software CyclePad, Intelligent Computer Aided Instruction is incorporated in an advanced energy conversion course for Mechanical Engineering students. The CyclePad software…

A Pilot Investigation Comparing Instructional Packages for MTS Training: "Manual Alone" vs. "Manual-Plus-Computer-Aided Personalized System of Instruction"

ERIC Educational Resources Information Center

Oliveira, Marileide; Goyos, Celso; Pear, Joseph

2012-01-01

Matching-to-sample (MTS) training consists of presenting a stimulus as a sample followed by stimuli called comparisons from which a subject makes a choice. This study presents results of a pilot investigation comparing two packages for teaching university students to conduct MTS training. Two groups--control and experimental--with 2 participants…

Utilization of Educationally Oriented Microcomputer Based Laboratories

ERIC Educational Resources Information Center

Fitzpatrick, Michael J.; Howard, James A.

1977-01-01

Describes one approach to supplying engineering and computer science educators with an economical portable digital systems laboratory centered around microprocessors. Expansion of the microcomputer based laboratory concept to include Learning Resource Aided Instruction (LRAI) systems is explored. (Author)

Adaptive Decision Aiding in Computer-Assisted Instruction: Adaptive Computerized Training System (ACTS).

ERIC Educational Resources Information Center

Hopf-Weichel, Rosemarie; And Others

This report describes results of the first year of a three-year program to develop and evaluate a new Adaptive Computerized Training System (ACTS) for electronics maintenance training. (ACTS incorporates an adaptive computer program that learns the student's diagnostic and decision value structure, compares it to that of an expert, and adapts the…

Computer Technology and Educational Equity. ERIC/CUE Urban Diversity Series, Number 91.

ERIC Educational Resources Information Center

Gordon, Edmund W.; Armour-Thomas, Eleanor

The impact of the technological revolution on education is examined in this monograph, which focuses primarily on computers. First, the history of the educational uses of a variety of media (film, radio, television, teaching machines, and videodisc systems) is traced and assessed. As instructional aids, it is said, the media economize teachers'…

A Survey and Analysis of Military Computer-Based Systems: A Two Part Study. Volume II. A Descriptive and Predictive Model for Evaluating Instructional Systems. Final Report.

ERIC Educational Resources Information Center

McDonnell Douglas Astronautics Co. - East, St. Louis, MO.

This is the second volume of a two volume study. The first volume examined the literature to identify authoring aids for developing instructional materials, and to identify information clearing houses for existing materials. The purpose of this volume was to develop a means for assessing the cost versus expected benefits of innovations in…

Addition of flexible body option to the TOLA computer program, part 1

NASA Technical Reports Server (NTRS)

Dick, J. W.; Benda, B. J.

1975-01-01

This report describes a flexible body option that was developed and added to the Takeoff and Landing Analysis (TOLA) computer program. The addition of the flexible body option to TOLA allows it to be used to study essentially any conventional type airplane in the ground operating environment. It provides the capability to predict the total motion of selected points on the analytical methods incorporated in the program and operating instructions for the option are described. A program listing is included along with several example problems to aid in interpretation of the operating instructions and to illustrate program usage.

Aids to Computer-Based Multimedia Learning.

ERIC Educational Resources Information Center

Mayer, Richard E.; Moreno, Roxana

2002-01-01

Presents a cognitive theory of multimedia learning that draws on dual coding theory, cognitive load theory, and constructivist learning theory and derives some principles of instructional design for fostering multimedia learning. These include principles of multiple representation, contiguity, coherence, modality, and redundancy. (SLD)

The Computer as an Aid to Reading Instruction. Learning Package No. 27.

ERIC Educational Resources Information Center

Simic, Marge, Comp.; Smith, Carl, Ed.

Originally developed for the Department of Defense Schools (DoDDS) system, this learning package on computer use in reading is designed for teachers who wish to upgrade or expand their teaching skills on their own. The package includes an overview of the project; a comprehensive search of the ERIC database; a lecture giving an overview on the…

Could a Laptop Computer plus the Liquid Crystal Display Projector Amount to Improved Multimedia Geoscience Instruction?

ERIC Educational Resources Information Center

Chang, C.Y.

2004-01-01

In this study, a multimedia computer-aided tutorial (MCAT) on the topic of debris-flow hazards was developed for senior high-school students in Taiwan. The format of the new course is a blend of whole-class presentations, interactive discussions among the teacher and students, and classroom activities using the MCAT software. The whole-class…

Design Principles and First Educational Experiments of pR, a Platform to Infer Geo-Referenced Itineraries from Travel Stories

ERIC Educational Resources Information Center

Loustau, Pierre; Nodenot, Thierry; Gaio, Mauro

2009-01-01

Purpose: The purpose of this paper is to present a computational approach and a toolset to infer spatial displacements as they occur in route narrative documents and report on first experiments done to produce computer-aided learning (CAL) applications and instructional design editors that exploit the inferred georeferenced itineraries.…

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

PubMed

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-01-01

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

PubMed

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-06-27

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Computer-Based Mathematics Instructions for Engineering Students

NASA Technical Reports Server (NTRS)

Khan, Mustaq A.; Wall, Curtiss E.

1996-01-01

Almost every engineering course involves mathematics in one form or another. The analytical process of developing mathematical models is very important for engineering students. However, the computational process involved in the solution of some mathematical problems may be very tedious and time consuming. There is a significant amount of mathematical software such as Mathematica, Mathcad, and Maple designed to aid in the solution of these instructional problems. The use of these packages in classroom teaching can greatly enhance understanding, and save time. Integration of computer technology in mathematics classes, without de-emphasizing the traditional analytical aspects of teaching, has proven very successful and is becoming almost essential. Sample computer laboratory modules are developed for presentation in the classroom setting. This is accomplished through the use of overhead projectors linked to graphing calculators and computers. Model problems are carefully selected from different areas.

United States Air Force Training Management 2010. Volume 2. A Strategy for Superiority

DTIC Science & Technology

1989-03-01

decontaminate the ramp area with the remote robotic Chemical- Biological Warfare (CBW) sterilizers. If the Chemical- Biological (CB) attacks continue, she will be...Of Skilled Craftsmen Troubles Some Firms." The Wall Street Journal. 14 September 1987, pp. 1,8. 44. Naisbitt, John. Megatrends : Ten New Directions...Computer Based Training CBW Chemical- Biological Warfare CMAS Computer-Based Maintenance Aids System CMI Computer-Managed Instruction DOD Department of

Rehabilitation Aids.

ERIC Educational Resources Information Center

National Center on Educational Media and Materials for the Handicapped, Columbus, OH.

Selected from the National Instructional Materials Information System (NIMIS)--a computer based on-line interactive retrieval system on special education materials--the bibliography covers 40 equipment items for rehabilitation and physical therapy programs for all levels of handicapped children. Described are such items as a handygym, a suspension…

MCAID--A Generalized Text Driver.

ERIC Educational Resources Information Center

Ahmed, K.; Dickinson, C. J.

MCAID is a relatively machine-independent technique for writing computer-aided instructional material consisting of descriptive text, multiple choice questions, and the ability to call compiled subroutines to perform extensive calculations. It was specially developed to incorporate test-authoring around complex mathematical models to explore a…

The Castaldi Nomogram. An Aid for Translating the Curriculum of Junior and Senior High Schools into the Necessary Number of Instructional Spaces or Classrooms.

ERIC Educational Resources Information Center

Castaldi, Basil

This aid consists of three specially designed charts for determining the number of teaching stations required to house any given enrollment of pupils in any subject. Further uses are to determine class size, to discover the adequacy of proposed multi-purpose rooms, and to compute the fraction of a school day any room will be used. A specific…

Numerical Control/Computer Aided Manufacturing (NC/CAM), A Descom Study

DTIC Science & Technology

1979-07-01

CAM machines operate directly from computers, but most get instructions in the form of punched tape. The applications of NC/CAM are virtually...Although most NC/CAM equipment is metal working, its applications include electronics manufacturing, glass making, food processing, materiel handling...drafting, woodworking, plastics and inspection, just to name a few. Numerical control, like most technologies, is an advancing and evolutionary process

Intelligent Computer-Aided Instruction and Musical Performance Skills. CITE Report No. 18.

ERIC Educational Resources Information Center

Baker, Michael

This paper is a transcription from memory of a short talk that used overhead projector slides, with musical examples played on an Apple Macintosh computer and a Yamaha CX5 synthesizer. The slides appear in the text as reduced "icons" at the point where they would have been used in the talk. The paper concerns ways in which artificial intelligence…

CBT Pilot Program Instructional Guide. Basic Drafting Skills Curriculum Delivered through CAD Workstations and Artificial Intelligence Software.

ERIC Educational Resources Information Center

Smith, Richard J.; Sauer, Mardelle A.

This guide is intended to assist teachers in using computer-aided design (CAD) workstations and artificial intelligence software to teach basic drafting skills. The guide outlines a 7-unit shell program that may also be used as a generic authoring system capable of supporting computer-based training (CBT) in other subject areas. The first section…

Computer Aided Instruction for a Course in Boolean Algebra and Logic Design. Final Report (Revised).

ERIC Educational Resources Information Center

Roy, Rob

The use of computers to prepare deficient college and graduate students for courses that build upon previously acquired information would solve the growing problem of professors who must spend up to one third of their class time in review of material. But examination of students who were taught Boolean Algebra and Logic Design by means of Computer…

Programming Language CAMIL II: Implementation and Evaluation.

ERIC Educational Resources Information Center

Gardner, Edward

A reimplementation of Computer assisted/managed instruction language (CAMIL) for qualitative and quantitative improvements in the software is presented. The reformatted language is described narratively, and major components of the system software are indicated and discussed. Authoring aids and imbedded support facilities are also described, and…

The use of computer-aided learning in chemistry laboratory instruction

NASA Astrophysics Data System (ADS)

Allred, Brian Robert Tracy

This research involves developing and implementing computer software for chemistry laboratory instruction. The specific goal is to design the software and investigate whether it can be used to introduce concepts and laboratory procedures without a lecture format. This would allow students to conduct an experiment even though they may not have been introduced to the chemical concept in their lecture course. This would also allow for another type of interaction for those students who respond more positively to a visual approach to instruction. The first module developed was devoted to using computer software to help introduce students to the concepts related to thin-layer chromatography and setting up and running an experiment. This was achieved through the use of digitized pictures and digitized video clips along with written information. A review quiz was used to help reinforce the learned information. The second module was devoted to the concept of the "dry lab". This module presented students with relevant information regarding the chemical concepts and then showed them the outcome of mixing solutions. By these observations, they were to determine the composition of unknown solutions based on provided descriptions and comparison with their written observations. The third piece of the software designed was a computer game. This program followed the first two modules in providing information the students were to learn. The difference here, though, was incorporating a game scenario for students to use to help reinforce the learning. Students were then assessed to see how much information they retained after playing the game. In each of the three cases, a control group exposed to the traditional lecture format was used. Their results were compared to the experimental group using the computer modules. Based upon the findings, it can be concluded that using technology to aid in the instructional process is definitely of benefit and students were more successful in learning. It is important to note, though, that one single type of instructional method is not the best way to inspire learning. It seems multiple methods provide the best educational experience for all.

Scientists at Work. Final Report.

ERIC Educational Resources Information Center

Education Turnkey Systems, Inc., Falls Church, VA.

This report summarizes activities related to the development, field testing, evaluation, and marketing of the "Scientists at Work" program which combines computer assisted instruction with database tools to aid cognitively impaired middle and early high school children in learning and applying thinking skills to science. The brief report reviews…

Instructional Aides: Employment, Payroll Procedures, Supervision, Performance Appraisal, Legal Aspects.

ERIC Educational Resources Information Center

Nielsen, Earl T.

Designed to assist school administrators in their efforts to secure, train, and retain the most qualified instructional aides available, the monograph discusses procedures for employment, payroll processing, aide supervision, performance appraisal, and legal aspects involved in the hiring of instructional aides. Specific topics include…

Teaching the Grammar and Syntax of Business German: Problems and Practical Suggestions. Innovative Strategies and Exercises for Computer-Aided Instruction: Word Order Variation.

ERIC Educational Resources Information Center

Paulsell, Patricia R.

A computer program is described that is a substack of the "Business German" HyperCard program previously developed by Paulsell and designed as a tutorial to be used with materials for a business German course on the third year college level. The program consists of six stacks, a central one providing graphics-based information on Germany…

Application of Particle Swarm Optimization in Computer Aided Setup Planning

NASA Astrophysics Data System (ADS)

Kafashi, Sajad; Shakeri, Mohsen; Abedini, Vahid

2011-01-01

New researches are trying to integrate computer aided design (CAD) and computer aided manufacturing (CAM) environments. The role of process planning is to convert the design specification into manufacturing instructions. Setup planning has a basic role in computer aided process planning (CAPP) and significantly affects the overall cost and quality of machined part. This research focuses on the development for automatic generation of setups and finding the best setup plan in feasible condition. In order to computerize the setup planning process, three major steps are performed in the proposed system: a) Extraction of machining data of the part. b) Analyzing and generation of all possible setups c) Optimization to reach the best setup plan based on cost functions. Considering workshop resources such as machine tool, cutter and fixture, all feasible setups could be generated. Then the problem is adopted with technological constraints such as TAD (tool approach direction), tolerance relationship and feature precedence relationship to have a completely real and practical approach. The optimal setup plan is the result of applying the PSO (particle swarm optimization) algorithm into the system using cost functions. A real sample part is illustrated to demonstrate the performance and productivity of the system.

Satellites for U.S. education - Needs, opportunities and systems.

NASA Technical Reports Server (NTRS)

Morgan, R. P.; Singh, J. P.; Anderson, B. D.; Greenberg, E.

1972-01-01

This paper presents results of a continuing interdisciplinary study of the potential applications of Fixed- and Broadcast-Satellites for educational information transfer in the United States for the period 1975-1985. The status of U.S. education is examined and needs, trends and issues are discussed. The existing educational telecommunications infrastructure is examined and opportunities for satellite services are defined. Potential uses include networking of educational institutions and service centers for delivery of public and instructional television, computer-aided instruction, computing and information resources to regions and groups not now adequately served. Systems alternatives and some of the organizational and economic issues inherent in the deployment of an educational satellite system are discussed.-

Where Are the Quadratic's Complex Roots?

ERIC Educational Resources Information Center

Páll-Szabó, Ágnes Orsolya

2015-01-01

A picture is worth more than a thousand words--in mathematics too. Many students fail in learning mathematics because, in some cases, teachers do not offer the necessary visualization. Nowadays technology overcomes this problem: computer aided instruction is one of the most efficients methods in teaching mathematics. In this article we try to…

Enhancement of Teaching and Learning of the Fundamentals of Nuclear Engineering Using Multimedia Courseware.

ERIC Educational Resources Information Center

Keyvan, Shahla A.; Pickard, Rodney; Song, Xiaolong

1997-01-01

Computer-aided instruction incorporating interactive multimedia and network technologies can boost teaching effectiveness and student learning. This article describes the development and implementation of network server-based interactive multimedia courseware for a fundamental course in nuclear engineering. A student survey determined that 80% of…

GUIDON. Technical Report #9.

ERIC Educational Resources Information Center

Clancey, William J.

GUIDON is an intelligent computer-aided instruction (ICAI) program for teaching diagnosis, which has been tested using the infectious disease diagnosis rules of the MYCIN consultation system developed at the Stanford University School of Medicine. GUIDON engages a student in a dialogue about a patient suspected of having an infection and thus…

Computer Activities for College Algebra and Precalculus.

ERIC Educational Resources Information Center

White, Jacci Wozniak; Norwich, Vicki Howard

Mathematics software can be a great aid in understanding difficult mathematics concepts at all levels. This paper presents nine exercises on calculus concepts by using different software used in mathematics education. Each exercise includes instruction on how to use software in order to highlight a specific concept in mathematics. This paper also…

Programmable Calculators as Teaching Aids and Alternatives to Computers

ERIC Educational Resources Information Center

LaBar, Martin; And Others

1974-01-01

The authors provide a list of calculators which have a capacity for handling programs, and a list of programs for such calculators which are available at cost. They argue that the use of these materials at many levels of mathematics instruction enhances both motivation and understanding. (SD)

Extending Engineering Design Graphics Laboratories to Have a CAD/CAM Component: Implementation Issues.

ERIC Educational Resources Information Center

Juricic, Davor; Barr, Ronald E.

1996-01-01

Reports on a project that extended the Engineering Design Graphics curriculum to include instruction and laboratory experience in computer-aided design, analysis, and manufacturing (CAD/CAM). Discusses issues in project implementation, including introduction of finite element analysis to lower-division students, feasibility of classroom prototype…

Analyzing and Modifying Coaching Behaviors by Means of Computer Aided Observation.

ERIC Educational Resources Information Center

Partridge, David; Franks, Ian M.

1996-01-01

This study examined the effectiveness of the Coaching Analysis Instrument (CAI), which collects data and provides feedback on coaches' verbal behaviors as they organize and instruct athletes during practices. Practice sessions were videotaped and analyzed. CAI results helped modify the coaches' behaviors in positive ways. (SM)

Unsupervised MDP Value Selection for Automating ITS Capabilities

ERIC Educational Resources Information Center

Stamper, John; Barnes, Tiffany

2009-01-01

We seek to simplify the creation of intelligent tutors by using student data acquired from standard computer aided instruction (CAI) in conjunction with educational data mining methods to automatically generate adaptive hints. In our previous work, we have automatically generated hints for logic tutoring by constructing a Markov Decision Process…

Ready Set. . .Authoring Systems to Get You Started on Interactive Video Design.

ERIC Educational Resources Information Center

Rhodes, Dent M.; Azbell, Janet White

1986-01-01

Evaluates four authoring systems used to develop computer aided interactive video: The Instructor, InfoWriter, IDeAS, and ProCAL2. The information provided includes hardware requirements, compatibility with videotape and/or videodisc, instructional options available, user data-management capabilities, procedures for logging tapes, and access for…

Investigation of the computer experiences and attitudes of pre-service mathematics teachers: new evidence from Turkey.

PubMed

Birgin, Osman; Catlioğlu, Hakan; Gürbüz, Ramazan; Aydin, Serhat

2010-10-01

This study aimed to investigate the experiences of pre-service mathematics (PSM) teachers with computers and their attitudes toward them. The Computer Attitude Scale, Computer Competency Survey, and Computer Use Information Form were administered to 180 Turkish PSM teachers. Results revealed that most PSM teachers used computers at home and at Internet cafes, and that their competency was generally intermediate and upper level. The study concludes that PSM teachers' attitudes about computers differ according to their years of study, computer ownership, level of computer competency, frequency of computer use, computer experience, and whether they had attended a computer-aided instruction course. However, computer attitudes were not affected by gender.

Instructional design in mathematics for undergraduate students based on learning by mistakes approach utilizing scilab assistance

NASA Astrophysics Data System (ADS)

Kartika, H.

2018-03-01

The issue related to making mistake while learning such as negative emotion is found while students learn mathematics with the aid of a computer. When the computer output showed a mistake message, the students considered it as a computer software malfunction. Based on this issue, the writer designs an instructional model based on learning by mistake approach and which is Scilab assisted. The method used in this research is research design involving undergraduate students in matrix algebra courses. The data collected throught survey with questionnaire to gain feedback about the approach implemented. The data analyzed using quantitative descriptive. The instructional design proposed is the student act as a mistake corrector while the teacher acts as a mistake maker. Teacher deliberately makes mistakes with the help of Scilab software. On the other hand, students correct, analyze and explain errors resulting from Scilab software. The result of this research is an ICT based instructional design which is expected to be applicable as an alternative learning in directing students to think positively about mistakes in learning. Furthermore, students are also expected to improve their ability in understanding and thinking critically while solving problems and improving themselves in learning mathematics.

Computer-aided auscultation learning system for nursing technique instruction.

PubMed

Hou, Chun-Ju; Chen, Yen-Ting; Hu, Ling-Chen; Chuang, Chih-Chieh; Chiu, Yu-Hsien; Tsai, Ming-Shih

2008-01-01

Pulmonary auscultation is a physical assessment skill learned by nursing students for examining the respiratory system. Generally, a sound simulator equipped mannequin is used to group teach auscultation techniques via classroom demonstration. However, nursing students cannot readily duplicate this learning environment for self-study. The advancement of electronic and digital signal processing technologies facilitates simulating this learning environment. This study aims to develop a computer-aided auscultation learning system for assisting teachers and nursing students in auscultation teaching and learning. This system provides teachers with signal recording and processing of lung sounds and immediate playback of lung sounds for students. A graphical user interface allows teachers to control the measuring device, draw lung sound waveforms, highlight lung sound segments of interest, and include descriptive text. Effects on learning lung sound auscultation were evaluated for verifying the feasibility of the system. Fifteen nursing students voluntarily participated in the repeated experiment. The results of a paired t test showed that auscultative abilities of the students were significantly improved by using the computer-aided auscultation learning system.

An ICAI architecture for troubleshooting in complex, dynamic systems

NASA Technical Reports Server (NTRS)

Fath, Janet L.; Mitchell, Christine M.; Govindaraj, T.

1990-01-01

Ahab, an intelligent computer-aided instruction (ICAI) program, illustrates an architecture for simulator-based ICAI programs to teach troubleshooting in complex, dynamic environments. The architecture posits three elements of a computerized instructor: the task model, the student model, and the instructional module. The task model is a prescriptive model of expert performance that uses symptomatic and topographic search strategies to provide students with directed problem-solving aids. The student model is a descriptive model of student performance in the context of the task model. This student model compares the student and task models, critiques student performance, and provides interactive performance feedback. The instructional module coordinates information presented by the instructional media, the task model, and the student model so that each student receives individualized instruction. Concept and metaconcept knowledge that supports these elements is contained in frames and production rules, respectively. The results of an experimental evaluation are discussed. They support the hypothesis that training with an adaptive online system built using the Ahab architecture produces better performance than training using simulator practice alone, at least with unfamiliar problems. It is not sufficient to develop an expert strategy and present it to students using offline materials. The training is most effective if it adapts to individual student needs.

Enhancing the Attractiveness of Alcohol Education Via a Microcomputer Program.

ERIC Educational Resources Information Center

Meier, Scott T.

Getting students' attention is one of the most difficult problems for counselors who conduct alcohol education programs in high schools or colleges. A computer-aided instruction program using microcomputers for alcohol education was developed entitled "If You Drink: An Alcohol Education Program" (IYD). The IYD program consists of five modules: the…

The Software Line-up: What Reviewers Look for When Evaluating Software.

ERIC Educational Resources Information Center

ELECTRONIC Learning, 1982

1982-01-01

Contains a check list to aid teachers in evaluating software used in computer-assisted instruction on microcomputers. The evaluation form contains three sections: program description, program evaluation, and overall evaluation. A brief description of a software evaluation program in use at the Granite School District in Utah is included. (JJD)

Applying Learning Diagnosis Diagram in Computer Aided Instructions: Research, Practice and Evaluation

ERIC Educational Resources Information Center

Wu, YuLung

2010-01-01

In Taiwan, when students learn in experiment-related courses, they are often grouped into several teams. The familiar method of grouping learning is "Cooperative Learning". A well-organized grouping strategy improves cooperative learning and increases the number of activities. This study proposes a novel pedagogical method by adopting…

Web Pages: An Effective Method of Providing CAI Resource Material in Histology.

ERIC Educational Resources Information Center

McLean, Michelle

2001-01-01

Presents research that introduces computer-aided instruction (CAI) resource material as an integral part of the second-year histology course at the University of Natal Medical School. Describes the ease with which this software can be developed, using limited resources and available skills, while providing students with valuable learning…

Fostering At-Risk Preschoolers' Number Sense

ERIC Educational Resources Information Center

Baroody, Arthur; Eiland, Michael; Thompson, Bradley

2009-01-01

Research Findings: A 9-month study served to evaluate the effectiveness of a pre-kindergarten number sense curriculum. Phase 1 of the intervention involved manipulative-, game-based number sense instruction; Phase 2, computer-aided mental-arithmetic training with the simplest sums. Eighty 4- and 5-year-olds at risk for school failure were randomly…

A Cross-National CAI Tool To Support Learning Operations Decision-Making and Market Analysis.

ERIC Educational Resources Information Center

Mockler, Robert J.; Afanasiev, Mikhail Y.; Dologite, Dorothy G.

1999-01-01

Describes bicultural (United States and Russia) development of a computer-aided instruction (CAI) tool to learn management decision-making using information systems technologies. The program has been used with undergraduate and graduate students in both countries; it integrates free and controlled market concepts and combines traditional computer…

Innovative Teaching: An Empirical Study of Computer-Aided Instruction in Quantitative Business Courses

ERIC Educational Resources Information Center

Gonul, Fusun F.; Solano, Roger A.

2013-01-01

We investigate business undergraduate mathematics-based courses in a blended environment of online assignments and exams and offline lectures, and report the impact on academic performance of factors such as classroom attendance, web-based course supplements, and homework. We present results from both ordinary least squares and fixed effects,…

Advanced instrumentation concepts for environmental control subsystems

NASA Technical Reports Server (NTRS)

Yang, P. Y.; Schubert, F. H.; Gyorki, J. R.; Wynveen, R. A.

1978-01-01

Design, evaluation and demonstration of advanced instrumentation concepts for improving performance of manned spacecraft environmental control and life support systems were successfully completed. Concepts to aid maintenance following fault detection and isolation were defined. A computer-guided fault correction instruction program was developed and demonstrated in a packaged unit which also contains the operator/system interface.

Computer-Aided Authoring System (AUTHOR) User's Guide. Volume I. Final Report.

ERIC Educational Resources Information Center

Guitard, Charles R.

This user's guide for AUTHOR, an automatic authoring system which produces programmed texts for teaching symbol recognition, provides detailed instructions to help the user construct and enter the information needed to create the programmed text, run the AUTHOR program, and edit the automatically composed paper. Major sections describe steps in…

30 CFR 75.1713-4 - First-aid training program; availability of instruction to all miners.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid training program; availability of... Miscellaneous § 75.1713-4 First-aid training program; availability of instruction to all miners. On or before... the mine a course of instruction in first-aid conducted by the operator or under the auspices of the...

A Self-Instructional Course in Student Financial Aid Administration. Module 1--Student Financial Aid Administration: Course Study Guide & Introduction to the Field. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The first of a 17-module self-instructional course, this module provides neophyte financial aid administrators and other instructional personnel with a systematic introduction to the management of federal financial aid programs authorized by Title IV of the Higher Education Act. It is an introductory course that presents the major responsibilities…

Safety warnings and first aid instructions on consumer and pharmaceutical products in Nigeria: has there been an improvement?

PubMed

Nonyelum, Stanley Catherine; Nkem, Nwachukwu; Ifeyinwa, Chijoke-Nwauche; Orisakwe, Orish Ebere

2010-10-01

To investigate the adequacy of safety warnings and first aid instructions on the labels of pharmaceutical and consumer products in Nigeria. A market basket method (total collection of all available samples) was used to investigate the adequacy of safety warnings and first aid instructions on the labels of 600 pharmaceutical and consumer products in Nigeria. The results showed that 69.8% of the products had adequate warnings whereas 385 (64.1%) of the products screened had legible product warnings. Only 52 (8.7%) of the total number of products had appropriate first aid instructions while only 25 (4.12%) of the products described symptoms and full treatment of poisoning by the product and 319 (53.2%) products surveyed recommended calling a health professional. A total of 31 (5.2%) products had labels that were considered too technical (non English). Of the 600 products, 386 (64.3%) had dosage instructions that were considered adequate while 538 (89.6%) had adequate storage instructions. About 68% of the products had partially correct warnings while 44 or 7.3% had partially correct first aid instructions. Some products had neither warnings nor first aid instructions. This study suggests a not too impressive improvement in the correctness and appropriateness of label information.

Use of the computer for research on student thinking in physics

NASA Astrophysics Data System (ADS)

Grayson, Diane J.; McDermott, Lillian C.

1996-05-01

This paper describes the use of the computer-based interview as a research technique for investigating how students think about physics. Two computer programs provide the context: one intended for instruction, the other for research. The one designed for use as an instructional aid displays the motion of a ball rolling along a track that has level and inclined segments. The associated motion graphs are also shown. The other program, which was expressly designed for use in research, is based on the simulated motion of a modified Atwood's machine. The programs require students to predict the effect of the initial conditions and system parameters on the motion or on a graph of the motion. The motion that would actually occur is then displayed. The investigation focuses on the reasoning used by the students as they try to resolve discrepancies between their predictions and observations.

The Effectiveness of Electronic Text and Pictorial Graphic Organizers to Improve Comprehension Related to Functional Skills

ERIC Educational Resources Information Center

Douglas, Karen H.; Ayres, Kevin M.; Langone, John; Bramlett, Virginia Bell

2011-01-01

This study evaluated the effects of a computer-based instructional program to assist three students with mild to moderate intellectual disabilities in using pictorial graphic organizers as aids for increasing comprehension of electronic text-based recipes. Student comprehension of recipes was measured by their ability to verbally retell recipe…

Evaluator's Guide for Microcomputer-Based Instructional Packages. Developed by MicroSIFT, a Project of the Computer Technology Program. Sixth Revision.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This guide developed by MicroSIFT, a clearinghouse for microcomputer-based educational software and courseware, provides background information and forms to aid teachers and other educators in evaluating available microcomputer courseware. The evaluation process comprises six stages: (1) sifting, which screens out those programs that are not…

Development and Demonstration of Innovations in Adult Agricultural Education. Final Report.

ERIC Educational Resources Information Center

Persons, Edgar A.; And Others

One of a series of related inquiries, this study focused on computer aided decision making and record keeping in farm management; and on instructional variables in adult agricultural education which affect the reception of agricultural innovations. Phases 1 and 2 of this project entailed use of farm record data in preparing concise summaries and…

The Effect of Accelerated Reader on Reading Scores in a Rural School District

ERIC Educational Resources Information Center

Hunter, Teresa A.

2013-01-01

In this study, the implementation of Accelerated Reader (AR), a computer-assisted supplemental reading program, was investigated as a research-based instructional strategy to assess whether it aided a high-performing, rural school district in meeting adequate yearly progress goals. The theoretical framework was based on Vygotsky's zone of…

Screen Design Principles of Computer-Aided Instructional Software for Elementary School Students

ERIC Educational Resources Information Center

Berrin, Atiker; Turan, Bülent Onur

2017-01-01

This study aims to present primary school students' views about current educational software interfaces, and to propose principles for educational software screens. The study was carried out with a general screening model. Sample group of the study consisted of sixth grade students in Sehit Ögretmen Hasan Akan Elementary School. In this context,…

Example Based Pedagogical Strategies in a Computer Science Intelligent Tutoring System

ERIC Educational Resources Information Center

Green, Nicholas

2017-01-01

Worked-out examples are a common teaching strategy that aids learners in understanding concepts by use of step-by-step instruction. Literature has shown that they can be extremely beneficial, with a large body of material showing they can provide benefits over regular problem solving alone. This research looks into the viability of using this…

Exploiting the Potential of CD-ROM Databases: Staff Induction at the University of East Anglia.

ERIC Educational Resources Information Center

Guillot, Marie-Noelle; Kenning, Marie-Madeleine

1995-01-01

Overviews a project exploring the possibility of using CD-ROM applications and the design of exploratory didactic materials to introduce academic staff to the field of computer-assisted instruction. The project heightened the staff's awareness of electronic resources and their potential as research, teaching, and learning aids, with particular…

Effect of Visualization (Job Aids) in Facilitating Cognitive Development.

ERIC Educational Resources Information Center

Spaulding, Karen L.; Dwyer, Francis

This study examined the instructional effectiveness with which different job aid types facilitated learner achievement of different types of learning objectives and identified the degree to which low and high prior knowledge individuals profit from different job aid types. The instructional content used in the study was an instructional module on…

Title I Instructional Aides' Training Sessions (Nampa, Idaho, School District 131, November 21, 1974-January 2, 1975.

ERIC Educational Resources Information Center

Pearce, Consuelo Q. de

The four training sessions for instructional aides working with migrant children in the Nampa, Idaho school district included objectives to facilitate: (1) awareness of aide influence; (2) aide self-confidence; (3) comfortable interaction between aides and school district personnel; (4) problem detection and prevention; (5) the aide's role in…

How neuroscience is taught to North American dental students: results of the Basic Science Survey Series.

PubMed

Gould, Douglas J; Clarkson, Mackenzie J; Hutchins, Bob; Lambert, H Wayne

2014-03-01

The purpose of this study was to determine how North American dental students are taught neuroscience during their preclinical dental education. This survey represents one part of a larger research project, the Basic Science Survey Series for Dentistry, which covers all of the biomedical science coursework required of preclinical students in North American dental schools. Members of the Section on Anatomical Sciences of the American Dental Education Association assembled, distributed, and analyzed the neuroscience survey, which had a 98.5 percent response from course directors of the sixty-seven North American dental schools. The eighteen-item instrument collected demographic data on the course directors, information on the content in each course, and information on how neuroscience content is presented. Findings indicate that 1) most neuroscience instruction is conducted by non-dental school faculty members; 2) large content variability exists between programs; and 3) an increase in didactic instruction, integrated curricula, and use of computer-aided instruction is occurring. It is anticipated that the information derived from the survey will help guide neuroscience curricula in dental schools and aid in identifying appropriate content.

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

Advanced earth observation spacecraft computer-aided design software: Technical, user and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Krauze, L. D.

1983-01-01

The IDEAS computer of NASA is a tool for interactive preliminary design and analysis of LSS (Large Space System). Nine analysis modules were either modified or created. These modules include the capabilities of automatic model generation, model mass properties calculation, model area calculation, nonkinematic deployment modeling, rigid-body controls analysis, RF performance prediction, subsystem properties definition, and EOS science sensor selection. For each module, a section is provided that contains technical information, user instructions, and programmer documentation.

30 CFR 75.1713-6 - First-aid training program; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid training program; minimum... § 75.1713-6 First-aid training program; minimum requirements. (a) All first-aid training programs... course of instruction similar to that outlined in “First Aid, A Bureau of Mines Instruction Manual.” (b...

A Self-Instructional Course in Student Financial Aid Administration. Module 15: Internal Aid Office Management and Institutional Quality Control. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The 15th in a 17-module self-instructional course on student financial aid administration (designed for novice financial aid administrators and other institutional personnel) focuses on internal aid office management and institutional quality control. The course provides a systematic introduction to the management of federal financial aid programs…

Development of instructional, interactive, multimedia anatomy dissection software: a student-led initiative.

PubMed

Inwood, Matthew J; Ahmad, Jamil

2005-11-01

Although dissection provides an unparalleled means of teaching gross anatomy, it constitutes a significant logistical and financial investment for educational institutions. The increasing availability and waning cost of computer equipment has enabled many institutions to supplement their anatomy curriculum with Computer Aided Learning (CAL) software. At the Royal College of Surgeons in Ireland, two undergraduate medical students designed and produced instructional anatomy dissection software for use by first and second year medical students. The software consists of full-motion, narrated, QuickTime MPG movies presented in a Macromedia environment. Forty-four movies, between 1-11 min in duration, were produced. Each movie corresponds to a dissection class and precisely demonstrates the dissection and educational objectives for that class. The software is distributed to students free of charge and they are encouraged to install it on their Apple iBook computers. Results of a student evaluation indicated that the software was useful, easy to use, and improved the students' experience in the dissection classes. The evaluation also indicated that only a minority of students regularly used the software or had it installed on their laptop computers. Accordingly, effort should also be directed toward making the software more accessible and increasing students' comfort and familiarity with novel instructional media. The successful design and implementation of this software demonstrates that CAL software can be employed to augment, enhance and improve anatomy instruction. In addition, effective, high quality, instructional multimedia software can be tailored to an educational institution's requirements and produced by novice programmers at minimal cost. Copyright 2005 Wiley-Liss, Inc

The Computer as a Tool for Learning

PubMed Central

Starkweather, John A.

1986-01-01

Experimenters from the beginning recognized the advantages computers might offer in medical education. Several medical schools have gained experience in such programs in automated instruction. Television images and graphic display combined with computer control and user interaction are effective for teaching problem solving. The National Board of Medical Examiners has developed patient-case simulation for examining clinical skills, and the National Library of Medicine has experimented with combining media. Advances from the field of artificial intelligence and the availability of increasingly powerful microcomputers at lower cost will aid further development. Computers will likely affect existing educational methods, adding new capabilities to laboratory exercises, to self-assessment and to continuing education. PMID:3544511

Learning with On-Line and Hardcopy Tutorials. A Final Report. CDC Technical Report No. 32.

ERIC Educational Resources Information Center

Duffy, T. M.; And Others

Intended to aid in the design of computer systems that promote efficient learning and performance, this study compared the effects of using hard copy and online format tutorials on the learning activities of 48 undergraduate students in either design or engineering. The tutorials, which provided instruction on the use of the equipment and basic…

Final Report of the Computer Assisted Learning Test Project. Report No. 19.

ERIC Educational Resources Information Center

Van der Drift, K. D.; And Others

A pilot project was conducted to gain information to advise the Board of Directors at the University of Leyden as to the feasibility of using a computerized system to aid in instructional programs in the social sciences, law, medicine, arts, mathematics, and natural sciences at a low cost. The pilot project is divided into four parts which are…

Alternative Teaching Aids, or Why We Can Do Without the New Technology in Political Education.

ERIC Educational Resources Information Center

Langeveld, Willem

Social studies educators should refrain from using computer-assisted instruction as much as possible; instead, they should create a program that reveals the hard facts of a computerized society and its dangers to civil liberties and human dignity. Past examples of the standardizing effects of technology reach as far back as the printing press.…

Naval Training Equipment Center Index of Technical Reports,

DTIC Science & Technology

1982-09-01

741 RECOMMENDED PROCEDURES AND TRAINING NAVAL TRAINING AIDS. tAMPHIBIOUS OPERATIONS PROCEDURES AND RESEARCH PLANNING AD- 642 590 TRAINING DEVICES FOR...PROCEDURES AND RESEARCH PLANNING OBSERVATION AND FIRE CONTROL WITH FOR ANTI-AIR WARFARE TRAINING SPECIFIC REFERENCE TO THE TRAINING *AMPUTEES PROGRAM...619 AD- 707 757 NAVAL PERSONNEL *COMMUNICATION SATELLITES PROCEDURES AND RESEARCH PLANNING *COMBUSTION PRODUCTS Computer Managed Instruction by FOR

The Effects of a Chemistry Course with Integrated Information Communication Technologies on University Students' Learning and Attitudes

ERIC Educational Resources Information Center

Su, King-Dow

2008-01-01

The purpose of this study was to evaluate the instructional effects of using animations, static figures, PowerPoint bulletins, and e-plus software as chemistry texts with the aid of computer-based technology. This study analyzed the characteristics of students involved in three multimedia courses and their achievement and attitude toward chemistry…

Copyfitting Instructor: A Computer-Assisted Instructional Aid for the Dirtiest Job in Advertising Design and Production Courses.

ERIC Educational Resources Information Center

Wesson, David A.

Copyfitting is probably the least exciting portion of any course that deals with design and production of print advertising. Students find the transformation of manuscript copy into set type difficult to visualize. The math, though no more than multiplication and division, seems insurmountable to some--probably because the entities such as points,…

Significant Increase in Factual Knowledge with Web-Assisted Problem-Based Learning as Part of an Undergraduate Cardio-Respiratory Curriculum

ERIC Educational Resources Information Center

Raupach, T.; Munscher, C.; Pukrop, T.; Anders, S.; Harendza, S.

2010-01-01

In recent years, increasing attention has been paid to web-based learning although the advantages of computer-aided instruction over traditional teaching formats still need to be confirmed. This study examined whether participation in an online module on the differential diagnosis of dyspnoea impacts on student performance in a multiple choice…

Adapting the Goddard research and engineering management exercise (GREMEX) to nonspacecraft environments

NASA Technical Reports Server (NTRS)

Wales, R. O.

1973-01-01

A computerized training aid for all levels of research and development managers is presented. The computer model used for NASA training simulates development of a spacecraft. Operation of the model is described together with instructions for changing the input-data cards to alter the nomenclature and response of the model for use in other training environments.

Design specifications for NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction): Phase 2, Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Twitty, A.F.; Handler, B.H.; Duncan, L.D.

Data Systems Engineering Organization (DSEO) personnel are developing a prototype computer aided instruction (CAI) system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project is to provide a prototype for implementing CAI as an enhancement to existing NALDA training. The CAI prototype project is being performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. In Phase II a structured design and specification document was completed that will provide the basis for development and implementationmore » of the desired CAI system. Phase III will consist of designing, developing, and testing a user interface which will extend the features of the Phase II prototype. The design of the CAI prototype has followed a rigorous structured analysis based on Yourdon/DeMarco methodology and Information Engineering tools. This document includes data flow diagrams, a data dictionary, process specifications, an entity-relationship diagram, a curriculum description, special function key definitions, and a set of standards developed for the NALDA CAI Prototype.« less

The cybernetic rehabilitation aid: preliminary results for wrist and elbow motions in healthy subjects.

PubMed

Akdogan, Erhan; Shima, Keisuke; Kataoka, Hitoshi; Hasegawa, Masaki; Otsuka, Akira; Tsuji, Toshio

2012-09-01

This paper proposes the cybernetic rehabilitation aid (CRA) based on the concept of direct teaching using tactile feedback with electromyography (EMG)-based motor skill evaluation. Evaluation and teaching of motor skills are two important aspects of rehabilitation training, and the CRA provides novel and effective solutions to potentially solve the difficulties inherent in these two processes within a single system. In order to evaluate motor skills, EMG signals measured from a patient are analyzed using a log-linearized Gaussian mixture network that can classify motion patterns and compute the degree of similarity between the patient's measured EMG patterns and the desired pattern provided by the therapist. Tactile stimulators are used to convey motion instructions from the therapist or the system to the patient, and a rehabilitation robot can also be integrated into the developed prototype to increase its rehabilitation capacity. A series of experiments performed using the developed prototype demonstrated that the CRA can work as a human-human, human-computer and human-machine system. The experimental results indicated that the healthy (able-bodied) subjects were able to follow the desired muscular contraction levels instructed by the therapist or the system and perform proper joint motion without relying on visual feedback.

Attitudes of health care students about computer-aided neuroanatomy instruction.

PubMed

McKeough, D Michael; Bagatell, Nancy

2009-01-01

This study examined students' attitudes toward computer-aided instruction (CAI), specifically neuroanatomy learning modules, to assess which components were primary in establishing these attitudes and to discuss the implications of these attitudes for successfully incorporating CAI in the preparation of health care providers. Seventy-seven masters degree, entry-level, health care professional students matriculated in an introductory neuroanatomy course volunteered as subjects for this study. Students independently reviewed the modules as supplements to lecture and completed a survey to evaluate teaching effectiveness. Responses to survey statements were compared across the learning modules to determine if students viewed the modules differently. Responses to individual survey statements were averaged to measure the strength of agreement or disagreement with the statement. Responses to open-ended questions were theme coded, and frequencies and percentages were calculated for each. Students saw no differences between the learning modules. Students perceived the learning modules as valuable; they enjoyed using the modules but did not prefer CAI over traditional lecture format. The modules were useful in learning or reinforcing neuroanatomical concepts and improving clinical problem-solving skills. Students reported that the visual representation of the neuroanatomical systems, computer animation, ability to control the use of the modules, and navigational fidelity were key factors in determining attitudes. The computer-based learning modules examined in this study were effective as adjuncts to lecture in helping entry-level health care students learn and make clinical applications of neuroanatomy information.

Children Who Use Communication Aids Instructing Peer and Adult Partners During Play-Based Activity.

PubMed

Batorowicz, Beata; Stadskleiv, Kristine; von Tetzchner, Stephen; Missiuna, Cheryl

2016-06-01

Little is known about how children with severe motor impairments who use communication aids provide instructions when given control over interaction. In this study, 35 children - 18 who used communication aids and 17 who used natural speech - were videotaped in play-based activities. Both groups successfully instructed partners to build replications of models the partners could not see. The results demonstrate that children using communication aids can also have an active role in play-based activities using language, but that their experience with activities may be limited and their instructions may take longer to give. The children who used natural speech provided more detailed instructions and were more successful in guiding their partners. Creating opportunities for active participation in play may be important for the development of communicative autonomy.

46 CFR 160.174-15 - Instructions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... thermal protective aid and visible through a transparent storage case. The instructions must also be... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Thermal Protective Aids § 160.174-15 Instructions. (a) Each...

Advantages and Disadvantages of Using E-Mail as Instructional Aid: Some Random Thoughts.

ERIC Educational Resources Information Center

Xu, Gong-Li

This paper explores the educational benefits and limitations of e-mail as an instructional aid to classroom-based teaching. It looks at practical ideas of how e-mail has been used to aid classroom instruction, and highlights and examines each usage of e-mail in terms of its effects on classroom teaching. E-mail systems have been used for classroom…

A Self-Instructional Course in Student Financial Aid Administration. Module 2--Federal Student Financial Aid: History & Current Sources. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The second of 17 modules in a self-instructional course on student financial aid administration, this module offers novice financial aid administrators and other institutional personnel a systematic introduction to the management of federal financial aid programs authorized by the Higher Education Act Title IV. It traces the history of federal…

A Self-Instructional Course in Student Financial Aid Administration. Module 16: Forms and Publications. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

Module 16 (in a 17-module self-instructional course on student financial aid administration for novice financial aid administrators and other institutional personnel) discusses forms and publications that should be developed and used by the financial aid office. The full course is an introduction to the management of federal financial aid programs…

Longitudinal follow-up comparison of educational interventions: multimedia textbook, traditional lecture, and printed textbook.

PubMed

D'Alessandro, D M; Kreiter, C D; Erkonen, W E; Winter, R J; Knapp, H R

1997-11-01

The goal of this prospective, interinstitutional study was to compare the long-term instructional effectiveness of a pediatric multimedia textbook (MMTB) to that of a standard lecture and a printed textbook. A randomized cohort of 89 3rd-year medical students from two institutions were initially evaluated from June 1992 to June 1993 and reevaluated in May 1994. Students were randomly assigned to one of four instructional groups: computer-aided instruction by means of MMTBs (n = 21), traditional lecture (n = 23), printed textbook (n = 19), and a control group (n = 26). After instruction, all groups were tested by means of a multiple choice test at the end of their pediatric clerkship; they were given this same test 11-22 months later. The long-term instructional effectiveness of the MMTB, printed textbook, and lecture were the same as that in the control group, as determined by analysis of variance of mean test scores. The educational advantage of MMTBs observed immediately after instruction was not detected 1 year later. Because attrition reduced statistical power, further research is necessary to determine how educational fading affects these instructional formats.

[The effects of multimedia-assisted instruction on the skin care learning of nurse aides in long-term care facilities].

PubMed

Wu, Yu-Ling; Kao, Yu-Hsiu

2014-08-01

Skin care is an important responsibility of nurse aides in long-term care facilities, and the nursing knowledge, attitudes, and skills of these aides significantly affects quality of care. However, the work schedule of nurse aides often limits their ability to obtain further education and training. Therefore, developing appropriate and effective training programs for nurse aides is critical to maintaining and improving quality of care in long-term care facilities. This study investigates the effects of multimedia assisted instruction on the skin care learning of nurse aides working in long-term care facilities. A quasi-experimental design and convenient sampling were adopted in this study. Participants included 96 nurse aides recruited from 5 long-term care facilities in Taoyuan County, Taiwan. The experimental group received 3 weeks of multimedia assisted instruction. The control group did not receive this instruction. The Skin Care Questionnaire for Nurse Aides in Long-term Care Facilities and the Skin Care Behavior Checklist were used for assessment before and after the intervention. (1) Posttest scores for skin care knowledge, attitudes, behavior, and the skin care checklist were significantly higher than pretest scores for the intervention group. There was no significant difference between pretest and posttest scores for the control group. (2) A covariance analysis of pretest scores for the two groups showed that the experimental group earned significantly higher average scores than their control group peers for skin care knowledge, attitudes, behavior, and the skin care checklist. The multimedia assisted instruction demonstrated significant and positive effects on the skin care leaning of nurse aides in long-term care facilities. This finding supports the use of multimedia assisted instruction in the education and training of nurse aides in long-term care facilities in the future.

Teaching ocean wave forecasting using computer-generated visualization and animation—Part 1: sea forecasting

NASA Astrophysics Data System (ADS)

Whitford, Dennis J.

2002-05-01

Ocean waves are the most recognized phenomena in oceanography. Unfortunately, undergraduate study of ocean wave dynamics and forecasting involves mathematics and physics and therefore can pose difficulties with some students because of the subject's interrelated dependence on time and space. Verbal descriptions and two-dimensional illustrations are often insufficient for student comprehension. Computer-generated visualization and animation offer a visually intuitive and pedagogically sound medium to present geoscience, yet there are very few oceanographic examples. A two-part article series is offered to explain ocean wave forecasting using computer-generated visualization and animation. This paper, Part 1, addresses forecasting of sea wave conditions and serves as the basis for the more difficult topic of swell wave forecasting addressed in Part 2. Computer-aided visualization and animation, accompanied by oral explanation, are a welcome pedagogical supplement to more traditional methods of instruction. In this article, several MATLAB ® software programs have been written to visualize and animate development and comparison of wave spectra, wave interference, and forecasting of sea conditions. These programs also set the stage for the more advanced and difficult animation topics in Part 2. The programs are user-friendly, interactive, easy to modify, and developed as instructional tools. By using these software programs, teachers can enhance their instruction of these topics with colorful visualizations and animation without requiring an extensive background in computer programming.

Verification of the FtCayuga fault-tolerant microprocessor system. Volume 1: A case study in theorem prover-based verification

NASA Technical Reports Server (NTRS)

Srivas, Mandayam; Bickford, Mark

1991-01-01

The design and formal verification of a hardware system for a task that is an important component of a fault tolerant computer architecture for flight control systems is presented. The hardware system implements an algorithm for obtaining interactive consistancy (byzantine agreement) among four microprocessors as a special instruction on the processors. The property verified insures that an execution of the special instruction by the processors correctly accomplishes interactive consistency, provided certain preconditions hold. An assumption is made that the processors execute synchronously. For verification, the authors used a computer aided design hardware design verification tool, Spectool, and the theorem prover, Clio. A major contribution of the work is the demonstration of a significant fault tolerant hardware design that is mechanically verified by a theorem prover.

Computer-Based Technologies in Dentistry: Types and Applications

PubMed Central

Albuha Al-Mussawi, Raja’a M.; Farid, Farzaneh

2016-01-01

During dental education, dental students learn how to examine patients, make diagnosis, plan treatment and perform dental procedures perfectly and efficiently. However, progresses in computer-based technologies including virtual reality (VR) simulators, augmented reality (AR) and computer aided design/computer aided manufacturing (CAD/CAM) systems have resulted in new modalities for instruction and practice of dentistry. Virtual reality dental simulators enable repeated, objective and assessable practice in various controlled situations. Superimposition of three-dimensional (3D) virtual images on actual images in AR allows surgeons to simultaneously visualize the surgical site and superimpose informative 3D images of invisible regions on the surgical site to serve as a guide. The use of CAD/CAM systems for designing and manufacturing of dental appliances and prostheses has been well established. This article reviews computer-based technologies, their application in dentistry and their potentials and limitations in promoting dental education, training and practice. Practitioners will be able to choose from a broader spectrum of options in their field of practice by becoming familiar with new modalities of training and practice. PMID:28392819

Computer-Based Technologies in Dentistry: Types and Applications.

PubMed

Albuha Al-Mussawi, Raja'a M; Farid, Farzaneh

2016-06-01

During dental education, dental students learn how to examine patients, make diagnosis, plan treatment and perform dental procedures perfectly and efficiently. However, progresses in computer-based technologies including virtual reality (VR) simulators, augmented reality (AR) and computer aided design/computer aided manufacturing (CAD/CAM) systems have resulted in new modalities for instruction and practice of dentistry. Virtual reality dental simulators enable repeated, objective and assessable practice in various controlled situations. Superimposition of three-dimensional (3D) virtual images on actual images in AR allows surgeons to simultaneously visualize the surgical site and superimpose informative 3D images of invisible regions on the surgical site to serve as a guide. The use of CAD/CAM systems for designing and manufacturing of dental appliances and prostheses has been well established. This article reviews computer-based technologies, their application in dentistry and their potentials and limitations in promoting dental education, training and practice. Practitioners will be able to choose from a broader spectrum of options in their field of practice by becoming familiar with new modalities of training and practice.

An Evaluation of Characteristics Contributing towards Ease of User- Computer Interface in a Computer-Aided Instruction Exercise

DTIC Science & Technology

1987-12-31

Kent E., Hamel, Cheryl J., and Shrestha, Lisa B. 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year, Month, Day) 15 PAGE COUNT Final FROM...DTIC USERS UNCLASSIFIED 22a NAME OF RESPONSIBLE INDIVIDUAL 22b TELEPHONE (Include Area Code) 22c OFFICE SYMBOL Cheryl J. Hamel 407-380-4825 Code 712 DO...Lab ATTN: Dr Alva Bittner, Jr., P. 0. Box 29407 New Orleans, LA 70189 Commanding Officer NETPMSA ATTN: Mr Dennis Knott Pensacola, FL 32509-5000

The Impact of a Language Learning Task on Instructional Outcomes in Two Student Populations: High-Ability and Average-Ability Students.

ERIC Educational Resources Information Center

Nikolova, Ofelia; Taylor, Gregory

2003-01-01

High-ability (n=97) and average-ability students (n=84) were asked to read a Spanish passage on a computer and use glosses provided for certain words to aid in comprehension or create glosses using a Spanish-English dictionary and annotation software (experimental task). High-ability students performed significantly better after the experimental…

Courseware Integration into Task-Based Learning: A Case Study of Multimedia Courseware-Supported Oral Presentations for Non-English Major Students

ERIC Educational Resources Information Center

Tsai, Shu-Chiao

2011-01-01

This study reports on the integration of English for Specific Purposes (ESP) multimedia courseware for oral presentations into a self-learning and elective program for non-English major students in an English as a Foreign Language (EFL) setting. A computer-aided instruction approach, combined with a task-based learning approach, was adopted.…

Telecommunications media for the delivery of educational programming

NASA Technical Reports Server (NTRS)

Ballard, R.; Eastwood, L. F., Jr.

1974-01-01

The technical characteristics of various telecommunications media are examined for incorporation into educational networks. FM radio, AM radio, and VHF and UHF television are considered along with computer-aided instruction. The application of iteration networks to library systems, and microform technology are discussed. The basic principles of the communications theory are outlined, and the operation of the PLATO 4 random access system is described.

A Self-Instructional Course in Student Financial Aid Administration. Module 13: Verification. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

Module 13 of the 17-module self-instructional course on student financial aid administration (designed for novice financial aid administrators and other institutional personnel) focuses on the verification procedure for checking the accuracy of applicant data used in making financial aid awards. The full course provides an introduction to the…

A Self-Instructional Course in Student Financial Aid Administration. Module 7: Calculating Cost of Attendance. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The seventh module in a 17-module self-instructional course on student financial aid administration (designed for novice student financial aid administrators and other personnel) teaches how to calculate the cost of attendance. It provides a systematic introduction to the management of federal financial aid programs authorized by the Higher…

A Self-Instructional Course in Student Financial Aid Administration. Module 6: General Student Eligibility. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

Module 6 of a 17-module self-instructional course on student financial aid administration (for novice aid administrators and other personnel) presents a systematic introduction to the management of federal financial aid programs authorized by Title IV of the Higher Education Act with an emphasis on general student eligibility. Identifying the…

A Self-Instructional Course in Student Financial Aid Administration. Module 8: Need Analysis. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The eighth module in a 17-module self-instructional program on student financial aid administration (designed for novice student financial aid administrators and other personnel) focuses on need analysis. It provides an introduction to the management of federal financial aid programs authorized by the Higher Education Act Title IV. After…

A Self-Instructional Course in Student Financial Aid Administration. Module 10: The Pell Grant Program. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

Module 10 of a 17-module self-instructional course in student financial aid administration (for novice student financial aid officers and other institutional personnel) examines the Pell Grant program's eligibility requirements and award calculation procedures. It is part of a complete system teaching management of federal financial aid programs…

30 CFR 77.1704 - First aid training program; availability of instruction to all miners.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid training program; availability of... WORK AREAS OF UNDERGROUND COAL MINES Miscellaneous § 77.1704 First aid training program; availability... shall make available to all miners employed in the mine a course of instruction in first aid conducted...

Comparing eLearning and Classroom Instruction on HIV/AIDS Knowledge Uptake and Internalizing among South African and Irish Pupils

ERIC Educational Resources Information Center

van Zyl, Hendra; Visser, Pieter; van Wyk, Elmarie; Laubscher, Ria

2014-01-01

Objective: Innovative public health approaches are required to improve human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) education and prevention among adolescents, one of the most vulnerable groups to HIV/AIDS. Consequently, elearning and classroom instruction was assessed for HIV/AIDS knowledge uptake and internalizing…

AIDS Prevention. Guidelines for Schools.

ERIC Educational Resources Information Center

Maryland State Dept. of Health and Mental Hygiene, Baltimore.

These instructional guidelines contain information for school systems and teachers in Maryland to assist them in preparing to deliver instruction on Human Immunodeficiency Virus/Acquired Immune Deficiency Syndrome (HIV/AIDS) prevention to students. The instruction is appropriate to the age, intellectual development, maturity, and curiosity of the…

A software methodology for compiling quantum programs

NASA Astrophysics Data System (ADS)

Häner, Thomas; Steiger, Damian S.; Svore, Krysta; Troyer, Matthias

2018-04-01

Quantum computers promise to transform our notions of computation by offering a completely new paradigm. To achieve scalable quantum computation, optimizing compilers and a corresponding software design flow will be essential. We present a software architecture for compiling quantum programs from a high-level language program to hardware-specific instructions. We describe the necessary layers of abstraction and their differences and similarities to classical layers of a computer-aided design flow. For each layer of the stack, we discuss the underlying methods for compilation and optimization. Our software methodology facilitates more rapid innovation among quantum algorithm designers, quantum hardware engineers, and experimentalists. It enables scalable compilation of complex quantum algorithms and can be targeted to any specific quantum hardware implementation.

A Self-Instructional Course in Student Financial Aid Administration. Module 17--Evaluation of Student Aid Management: Self-Evaluation, Audit, and Program Review. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The 17th module in the 17-module self-instructional course on student financial aid administration discusses the evaluation of student aid management in terms of self-evaluation, audit, and program review. The full course offers a systematic introduction to the management of federal financial aid programs authorized by Title IV of the Higher…

A Self-Instructional Course in Student Financial Aid Administration. Module 4: The Roles and Responsibilities of the Financial Aid Office. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The fourth module in a self-instructional course for student financial aid administrator neophytes provides an introduction to the management of federal financial aid programs authorized by the Higher Education Act Title IV with an emphasis on the role of the financial aid office. Areas covered in Module 4 include how to recognize the basic areas…

A review of small canned computer programs for survey research and demographic analysis.

PubMed

Sinquefield, J C

1976-12-01

A variety of small canned computer programs for survey research and demographic analysis appropriate for use in developing countries are reviewed in this article. The programs discussed are SPSS (Statistical Package for the Social Sciences); CENTS, CO-CENTS, CENTS-AID, CENTS-AIE II; MINI-TAB EDIT, FREQUENCIES, TABLES, REGRESSION, CLIENT RECORD, DATES, MULT, LIFE, and PREGNANCY HISTORY; FIVFIV and SINSIN; DCL (Demographic Computer Library); MINI-TAB Population Projection, Functional Population Projection, and Family Planning Target Projection. A description and evaluation for each program of uses, instruction manuals, computer requirements, and procedures for obtaining manuals and programs are provided. Such information is intended to facilitate and encourage the use of the computer by data processors in developing countries.

Teacher Aide Individually Prescribed Instructional Modules.

ERIC Educational Resources Information Center

Livingston Univ., AL. Coll. of Education.

This document contains 59 individually prescribed instructional modules for use in teacher aide education programs. Each module has six sections: 1) Behavioral objectives, 2) purpose, 3) performance criteria, 4) experiences, 5) resources, and 6) taxonomy. The subjects covered include the use of instructional equipment such as language master,…

A Self-Instructional Course in Student Financial Aid Administration. Module 5: Title IV Institutional and Program Eligibility. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The fifth module in a 17-module self-instructional course on student financial aid administration teaches novice student financial aid administrators and other personnel about Title IV institutional and program eligibility. This introduction to management of federal financial aid programs authorized by the Higher Education Act Title IV, discusses…

A Self-Instructional Course in Student Financial Aid Administration. Module 3: The Legislative and Regulatory Processes. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The third of a 17-module self-instructional course on student financial aid administration, this module offers a systematic introduction to the management of federal financial aid programs authorized by Title IV of the Higher Education Act to novice financial aid administrators and other institutional personnel. It teaches the administrator to…

Adaptive Instructional Aids for Teaching a Blind Student in a Nonmajors College Chemistry Course

ERIC Educational Resources Information Center

Boyd-Kimball, Debra

2012-01-01

Adaptive tools and techniques for lecture instruction were developed for a blind student in a nonmajors college chemistry course. These adaptive instructional aids assisted the student in writing and balancing chemical reactions, calculating unit conversions and concentrations, drawing Lewis dot structures, understanding structural representations…

The Improvement and Individualization of Computer-Assisted Instruction

DTIC Science & Technology

1975-09-15

Spanish experiments had studied at least one Romance language and con- sequently were able to learn some of +he Spanish wordo by using cognates...Involved the acquisition of foreign- language vocabulary Items. The first (using Geraan vocabulary) concerned Itself with optimizing the selection of...method. Experiments with Spanish and Russian items showed that the method could be a powerful aid in building and retaining a large vocabulary of

Wumpus Advisor I. A First Implementation of a Program That Tutors Logical and Probabilistic Reasoning Skills. AI Memo 381.

ERIC Educational Resources Information Center

Stansfield, James L.; And Others

An Intelligent Computer Aided Instruction (ICAI) program that incorporates an Expert module which allows the tutor to compare the student's response to those generated by an expert was developed for use with Wumpus, a simple maze-exploration game. The Wumpus Advisor program offers advice to a player involved in choosing the best move in a game for…

Large-scale educational telecommunications systems for the US: An analysis of educational needs and technological opportunities

NASA Technical Reports Server (NTRS)

Morgan, R. P.; Singh, J. P.; Rothenberg, D.; Robinson, B. E.

1975-01-01

The needs to be served, the subsectors in which the system might be used, the technology employed, and the prospects for future utilization of an educational telecommunications delivery system are described and analyzed. Educational subsectors are analyzed with emphasis on the current status and trends within each subsector. Issues which affect future development, and prospects for future use of media, technology, and large-scale electronic delivery within each subsector are included. Information on technology utilization is presented. Educational telecommunications services are identified and grouped into categories: public television and radio, instructional television, computer aided instruction, computer resource sharing, and information resource sharing. Technology based services, their current utilization, and factors which affect future development are stressed. The role of communications satellites in providing these services is discussed. Efforts to analyze and estimate future utilization of large-scale educational telecommunications are summarized. Factors which affect future utilization are identified. Conclusions are presented.

New Spaces for Learning: Designing College Facilities to Utilize Instructional Aids and Media. Revised.

ERIC Educational Resources Information Center

Hauf, Harold D.; And Others

Colleges need appropriate large group instructional facilities for effective and efficient use of instructional aids and media. A well planned system of facilities must provide space for learning; production, origination, and support; storage and retrieval. Design begins with a building plan--a statement, made jointly by the administrator and…

The Technology of Instruction in Mexican Universities.

ERIC Educational Resources Information Center

McGinn, Noel F.; And Others

The purposes of this study were to assess the presence and use of instructional aids and teaching arrangements in Mexican universities; to explain the existence and use of such aids; and to suggest policies and procedures intended to improve instruction in Mexican universities. Interviews were conducted with the directors of and a sample of…

Design, Development, and Evaluation of Visual Aids for Communicating Prescription Drug Instructions to Nonliterate Patients in Rural Cameroon.

ERIC Educational Resources Information Center

Ngoh, Lucy N.; Shepherd, Marvin D.

1997-01-01

Culturally sensitive visual aids designed to help convey drug information to nonliterate female adults requiring antibiotics were developed. Researchers conceptualized the messages, and a local artist produced the visual aids. Comprehension and compliance with prescription instructions were evaluated (N=78). Results and practical implications are…

Factors related to the implementation and diffusion of new technologies: a pilot study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

In order to develop an understanding of how government intervention affects the processes of implementation and diffusion of new technologies, case studies of 14 technologies were carried out: automobiles; broadcast radio; frozen foods; black and white TV; color TV; polio vaccine; supersonic transport; fluoridation of water supplies; computer-aided instruction; basic oxygen process for steel; numerical control in manufacturing; digital computers; lasers; and integrated circuit. The key factors, their motivations for implementing/adopting the technology (or not doing so), the interactions among the key factors, and how these affected implementation/adoption are examined.

The microcomputer in the dental office: a new diagnostic aid.

PubMed

van der Stelt, P F

1985-06-01

The first computer applications in the dental office were based upon standard accountancy procedures. Recently, more and more computer applications have become available to meet the specific requirements of dental practice. This implies not only business procedures, but also facilities to store patient records in the system and retrieve them easily. Another development concerns the automatic calculation of diagnostic data such as those provided in cephalometric analysis. Furthermore, growth and surgical results in the craniofacial area can be predicted by computerized extrapolation. Computers have been useful in obtaining the patient's anamnestic data objectively and for the making of decisions based on such data. Computer-aided instruction systems have been developed for undergraduate students to bridge the gap between textbook and patient interaction without the risks inherent in the latter. Radiology will undergo substantial changes as a result of the application of electronic imaging devices instead of the conventional radiographic films. Computer-assisted electronic imaging will enable image processing, image enhancement, pattern recognition and data transmission for consultation and storage purposes. Image processing techniques will increase image quality whilst still allowing low-dose systems. Standardization of software and system configuration and the development of 'user friendly' programs is the major concern for the near future.

Instructional Aids in Mathematics: Using Models as Instructional Aids

ERIC Educational Resources Information Center

Johnson, Donovan A.; And Others

1973-01-01

Models are discussed both as concrete representations of mental constructs and as various manipulative devices. Illustrations of effective model use, suggestions for acquiring models, and lists of models for specific concepts are included. (LS)

A Randomised Controlled Trial of the Use of a Piece of Commercial Software for the Acquisition of Reading Skills

ERIC Educational Resources Information Center

Khan, Muhammad Ahmad; Gorard, Stephen

2012-01-01

We report here the overall results of a cluster randomised controlled trial of the use of computer-aided instruction with 672 Year 7 pupils in 23 secondary school classes in the north of England. A new piece of commercial software, claimed on the basis of publisher testing to be effective in improving reading after just six weeks of use in the…

Intelligent Embedded Instruction for Computer-Aided Design (CAD) systems

DTIC Science & Technology

1988-10-01

difficulties were predicted and six lessons were prepared that were aimed at preventing error pattern formation. The lessons were programmed in AUTOLISP ...and arcs, angles of lines, layering (linetype and color), and block creation and insertion. A program written in AUTOLISP examined the values in the...One site had AutoCAD reference manuals nearby and others had no manuals . * Only one site set a schedule for the users. * The attitudes of managers

A Response Evaluation Approach: An Aid for Computer Assisted Instruction Lesson Writing.

DTIC Science & Technology

1980-09-01

Arnheim, Rudolph, Visual Thinking, Berkeley and Los Angeles, California: UniversiEy of California Press, 1969. Bruner , Jerome S., Goodnow, Jacqueline J...describing a further path for each student, which would optimize his learning experience, must be at the machine’s disposal. In the student-directed...approach, the sequence of the material presented is altered only at the request of the student. The approach uses the aspect of learning by dis

A Self-Instructional Course in Student Financial Aid Administration. Module 14: Authorization, Fiscal Operations, & Reporting. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The 14th of 17 modules in a self-instructional course on student financial aid administration (geared toward novice financial aid administrators and other institutional personnel) focuses on Pell Grants and campus-based authorization, fiscal operations, and reporting. The full course provides an introduction to the management of federal financial…

Job Performance Aid Methods (for Job Guide Manuals and Other Formats).

ERIC Educational Resources Information Center

James, Frank W.

The report provides simplified instructions for writing and illustrating Job Performance Aids (JPAs). JPAs are step-by-step work instructions geared to the intellectual level of the performer and background training aids for psychological task preparedness. The first two sections of the report discuss the origin of JPAs and the principles of task…

A Local School District Implements a State Mandated Instructional Program on AIDS Prevention.

ERIC Educational Resources Information Center

Hall, Janie L.

Implementation of an Acquired Immune Deficiency Syndrome (AIDS) education program in Oklahoma is briefly outlined in the areas of the state mandate, local implementation, teacher training, parent meetings, and short and long courses. A study of the level of student knowledge about AIDS before and after instruction is described. Subjects were 7,145…

Every Body Needs First Aid... A Manual for LEP Students [Draft] and Teacher Guide.

ERIC Educational Resources Information Center

Adachi, Patricia

The manual contains both student and teacher materials for instruction in basic physiology and first aid. The instructional materials were developed for use with limited-English-proficient high school students, but are suitable for high school first aid classes because of their simplified English and format, sequential organization, detailed table…

The association of AIDS education and sex education with sexual behavior and condom use among teenage men.

PubMed

Ku, L C; Sonenstein, F L; Pleck, J H

1992-01-01

According to a 1988 nationally representative survey, most 15-19--year-old men in the United States have received formal instruction about AIDS (73%), birth control (79%) and resisting sexual activity (58%). Results of multivariate analyses show the receipt of AIDS education and sex education to be associated with modest but significant decreases in the number of partners and the frequency of intercourse in the year prior to the survey. Having received instruction in these topics was also associated with more consistent condom use. Instruction in some topics was associated with increases in knowledge and attitudes about AIDS, but these increases were not always correlated with safer behavior.

Instructional Aides.

ERIC Educational Resources Information Center

Nielsen, Earl T.

This monograph is designed to assist administrative school personnel in selecting, training, and retaining the best qualified instructional aides available. It covers five areas: (1) employment procedures--outlining important points under recruitment, applications, examinations, interviews, and selection; (2) payroll procedures--outlining how to…

An investigative study into the effectiveness of using computer-aided instruction (CAI) as a laboratory component of college-level biology: A case study

NASA Astrophysics Data System (ADS)

Barrett, Joan Beverly

Community colleges serve the most diverse student populations in higher education. They consist of non-traditional, part-time, older, intermittent, and mobile students of different races, ethnic backgrounds, language preferences, physical and mental abilities, and learning style preferences. Students who are academically challenged may have diverse learning characteristics that are not compatible with the more traditional approaches to the delivery of instruction. With this need come new ways of solving the dilemma, such as Computer-aided Instruction (CAI). This case study investigated the use of CAI as a laboratory component of college-level biology in a small, rural community college setting. The intent was to begin to fill a void that seems to exist in the literature regarding the role of the faculty in the development and use of CAI. In particular, the investigator was seeking to understand the practice and its effectiveness, especially in helping the under prepared student. The case study approach was chosen to examine a specific phenomenon within a single institution. Ethnographic techniques, such as interviewing, documentary analysis, life's experiences, and participant observations were used to collect data about the phenomena being studied. Results showed that the faculty was primarily self-motivated and self-taught in their use of CAI as a teaching and learning tool. The importance of faculty leadership and collegiality was evident. Findings showed the faculty confident that expectations of helping students who have difficulties with mathematical concepts have been met and that CAI is becoming the most valuable of learning tools. In a traditional college classroom, or practice, time is the constant (semesters) and competence is the variable. In the CAI laboratory time became the variable and competence the constant. The use of CAI also eliminated hazardous chemicals that were routinely used in the more traditional lab. Outcomes showed that annual savings from operations were realized after the initial capital investment for computer hardware and software were made.

Inconsistencies in emergency instructions on common household product labels.

PubMed

Cantrell, F Lee; Nordt, Sean Patrick; Krauss, Jamey R

2013-10-01

Human exposures to non-pharmaceutical products often results in serious injury and death annually in the United States. Studies performed more than 25 years ago described inadequate first aid advice on the majority of household products. The current study evaluates contemporary non-pharmaceutical products with respect to location, uniformity and type of their first aid and emergency contact instructions. A random, convenience sample of commercial product label information was obtained from local retail stores over an 8 month period. Twelve common non-pharmaceutical product categories, with large numbers of annual human exposures, were identified from National Poison Data Systems data. A minimum of 10 unique products for each category utilized. The following information identified: product name and manufacturer, location on container, presence and type of route-specific treatment, medical assistance referral information. A total of 259 product labels were examined. First aid/contact information was located on container: rear 162 (63 %), side 28 (11 %), front 3 (1 %), bottom 2 (0.77 %), behind label 14 (5 %), missing entirely 50 (19 %). Fifty-five products (21 %) lacked any first aid instructions. Suggested contacts for accidental poisoning: none listed 75 (29 %), physician 144 (56 %), poison control centers 102 (39 %), manufacturer 44 (17 %), "Call 911" 10 (4 %). Suggested contacts for unintentional exposure and content of first aid instructions on household products were inconsistent, frequently incomplete and at times absent. Instruction locations similarly lacked uniformity. Household product labels need to provide concise, accurate first aid and emergency contact instructions in easy-to-understand language in a universal format on product labels.

The effect of four instructional methods, gender, and time of testing on the achievement of sixth graders learning to interpret graphs

NASA Astrophysics Data System (ADS)

Young, Jerry Wayne

The purpose of this study was to determine the effects of four instructional methods (direct instruction, computer-aided instruction, video observation, and microcomputer-based lab activities), gender, and time of testing (pretest, immediate posttest for determining the immediate effect of instruction, and a delayed posttest two weeks later to determine the retained effect of the instruction) on the achievement of sixth graders who were learning to interpret graphs of displacement and velocity. The dependent variable of achievement was reflected in the scores earned by students on a testing instrument of established validity and reliability. The 107 students participating in the study were divided by gender and were then randomly assigned to the four treatment groups, each taught by a different teacher. Each group had approximately equal numbers of males and females. The students were pretested and then involved in two class periods of the instructional method which was unique to their group. Immediately following treatment they were posttested and two weeks later they were posttested again. The data in the form of test scores were analyzed with a two-way split-plot analysis of variance to determine if there was significant interaction among technique, gender, and time of testing. When significant interaction was indicated, the Tukey HSD test was used to determine specific mean differences. The results of the analysis indicated no gender effect. Only students in the direct instruction group and the microcomputer-based laboratory group had significantly higher posttest-1 scores than pretest scores. They also had significantly higher posttest-2 scores than pretest scores. This suggests that the learning was retained. The other groups experienced no significant differences among pretest, posttest-1, and posttest-2 scores. Recommendations are that direct instruction and microcomputer-based laboratory activities should be considered as effective stand-alone methods for teaching sixth grade students to interpret graphs of displacement and velocity. However, video and computer instruction may serve as supplemental activities.

Job Aids: Descriptive Authoring Flowcharts for Phase II--DESIGN of the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Schulz, Russel E.; Farrell, Jean R.

This resource guide for the use of job aids ("how-to-do-it" guidance) for activities identified in the second phase of the Instructional Systems Development Model (ISD) contains an introduction to the use of job aids, as well as descriptive authoring flowcharts for Blocks II.1 through II.4. The introduction includes definitions;…

Job Aids: Descriptive Authoring Flowcharts for Phase I--ANALYZE of the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Schulz, Russel E.; Farrell, Jean R.

This resource guide for the use of job aids ("how-to-do-it" guidance) for activities identified in the first phase of the Instructional Systems Development Model (ISD) contains an introduction to the use of job aids, as well as descriptive authoring flowcharts for Blocks I.2 through I.5. The introduction includes definitions;…

Job Aids: Descriptive Authoring Flowcharts for Phase III--DEVELOP of the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Schulz, Russel E.; Farrell, Jean R.

This resource guide for the use of job aids ("how-to-do-it" guidance) for activities identified in the third phase of the Instructional Systems Development Model (ISD) contains an introduction to the use of job aids, as well as descriptive authoring flowcharts for Blocks III.1 through III.5. The introduction includes definitions;…

The Use of Animated Videos to Illustrate Oral Solid Dosage Form Manufacturing in a Pharmaceutics Course.

PubMed

Yellepeddi, Venkata Kashyap; Roberson, Charles

2016-10-25

Objective. To evaluate the impact of animated videos of oral solid dosage form manufacturing as visual instructional aids on pharmacy students' perception and learning. Design. Data were obtained using a validated, paper-based survey instrument designed to evaluate the effectiveness, appeal, and efficiency of the animated videos in a pharmaceutics course offered in spring 2014 and 2015. Basic demographic data were also collected and analyzed. Assessment data at the end of pharmaceutics course was collected for 2013 and compared with assessment data from 2014, and 2015. Assessment. Seventy-six percent of the respondents supported the idea of incorporating animated videos as instructional aids for teaching pharmaceutics. Students' performance on the formative assessment in 2014 and 2015 improved significantly compared to the performance of students in 2013 whose lectures did not include animated videos as instructional aids. Conclusions. Implementing animated videos of oral solid dosage form manufacturing as instructional aids resulted in improved student learning and favorable student perceptions about the instructional approach. Therefore, use of animated videos can be incorporated in pharmaceutics teaching to enhance visual learning.

The Use of Animated Videos to Illustrate Oral Solid Dosage Form Manufacturing in a Pharmaceutics Course

PubMed Central

Roberson, Charles

2016-01-01

Objective. To evaluate the impact of animated videos of oral solid dosage form manufacturing as visual instructional aids on pharmacy students’ perception and learning. Design. Data were obtained using a validated, paper-based survey instrument designed to evaluate the effectiveness, appeal, and efficiency of the animated videos in a pharmaceutics course offered in spring 2014 and 2015. Basic demographic data were also collected and analyzed. Assessment data at the end of pharmaceutics course was collected for 2013 and compared with assessment data from 2014, and 2015. Assessment. Seventy-six percent of the respondents supported the idea of incorporating animated videos as instructional aids for teaching pharmaceutics. Students’ performance on the formative assessment in 2014 and 2015 improved significantly compared to the performance of students in 2013 whose lectures did not include animated videos as instructional aids. Conclusions. Implementing animated videos of oral solid dosage form manufacturing as instructional aids resulted in improved student learning and favorable student perceptions about the instructional approach. Therefore, use of animated videos can be incorporated in pharmaceutics teaching to enhance visual learning. PMID:27899837

Breaking with tradition: A scoping meta-analysis analyzing the effects of student-centered learning and computer-aided instruction on student performance in anatomy.

PubMed

Wilson, Adam B; Brown, Kirsten M; Misch, Jonathan; Miller, Corinne H; Klein, Barbie A; Taylor, Melissa A; Goodwin, Michael; Boyle, Eve K; Hoppe, Chantal; Lazarus, Michelle D

2018-04-16

While prior meta-analyses in anatomy education have explored the effects of laboratory pedagogies and histology media on learner performance, the effects of student-centered learning (SCL) and computer-aided instruction (CAI) have not been broadly evaluated. This research sought to answer the question, "How effective are student-centered pedagogies and CAI at increasing student knowledge gains in anatomy compared to traditional didactic approaches?" Relevant studies published within the past 51 years were searched using five databases. Predetermined eligibility criteria were applied to the screening of titles and abstracts to discern their appropriateness for study inclusion. A summary effect size was estimated to determine the effects of SCL and CAI on anatomy performance outcomes. A moderator analysis of study features was also performed. Of the 3,035 records screened, 327 underwent full-text review. Seven studies, which comprised 1,564 participants, were included in the SCL analysis. An additional 19 studies analyzed the effects of CAI in the context of 2,570 participants. Upon comparing SCL to traditional instruction, a small positive effect on learner performance was detected (standardized mean difference (SMD = 0.24; [CI = 0.07, 0.42]; P = 0.006). Likewise, students with CAI exposure moderately outscored those with limited or no access to CAI (SMD = 0.59; [CI = 0.20, 0.98]; P = 0.003). Further analysis of CAI studies identified effects (P ≤ 0.001) for learner population, publication period, interventional approach, and intervention frequency. Overall, learners exposed to SCL and supplemental CAI outperformed their more classically-trained peers as evidenced by increases in short-term knowledge gains. Anat Sci Educ. © 2018 American Association of Anatomists. © 2018 American Association of Anatomists.

Designing Intelligent Computer Aided Instruction Systems with Integrated Knowledge Representation Schemes

DTIC Science & Technology

1990-06-01

the form of structured objects was first pioneered by Marvin Minsky . In his seminal article " A Framework for Representing Knowl- edge" he introduced... Minsky felt that the existing methods of knowledge representation were too finely grained and he proposed that knowledge is more than just a...not work" in realistic, complex domains. ( Minsky , 1981, pp. 95-128) According to Minsky "A frame is a data-structure for representing a stereo- typed

Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

PubMed

Caposecco, Andrea; Hickson, Louise; Meyer, Carly

2011-12-01

A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content.

A Self-Instructional Course in Student Financial Aid Administration. Module 12: The Campus-Based Programs: SEOG, CWS, and Perkins Loan. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The twelfth module in a 17-module self-instructional course on student financial aid administration discusses campus-based financial programs. They are SEOG (Supplemental Educational Opportunity Grant), CWS (College Work-Study), and Perkins Loans. It is part of a full course designed for novice financial aid administrators and other institutional…

SnapAnatomy, a computer-based interactive tool for independent learning of human anatomy.

PubMed

Yip, George W; Rajendran, Kanagasuntheram

2008-06-01

Computer-aided instruction materials are becoming increasing popular in medical education and particularly in the teaching of human anatomy. This paper describes SnapAnatomy, a new interactive program that the authors designed for independent learning of anatomy. SnapAnatomy is primarily tailored for the beginner student to encourage the learning of anatomy by developing a three-dimensional visualization of human structure that is essential to applications in clinical practice and the understanding of function. The program allows the student to take apart and to accurately put together body components in an interactive, self-paced and variable manner to achieve the learning outcome.

FPGA-based real-time phase measuring profilometry algorithm design and implementation

NASA Astrophysics Data System (ADS)

Zhan, Guomin; Tang, Hongwei; Zhong, Kai; Li, Zhongwei; Shi, Yusheng

2016-11-01

Phase measuring profilometry (PMP) has been widely used in many fields, like Computer Aided Verification (CAV), Flexible Manufacturing System (FMS) et al. High frame-rate (HFR) real-time vision-based feedback control will be a common demands in near future. However, the instruction time delay in the computer caused by numerous repetitive operations greatly limit the efficiency of data processing. FPGA has the advantages of pipeline architecture and parallel execution, and it fit for handling PMP algorithm. In this paper, we design a fully pipelined hardware architecture for PMP. The functions of hardware architecture includes rectification, phase calculation, phase shifting, and stereo matching. The experiment verified the performance of this method, and the factors that may influence the computation accuracy was analyzed.

Archery: A Planning Guide for Group and Individual Instruction.

ERIC Educational Resources Information Center

American Association for Health, Physical Education, and Recreation, Washington, DC.

This instructor's manual for group or individual instruction in archery includes line drawings as illustrations. The manual advances from facilities to beginning instruction and general instructional practices (safety tips, instructional aids, archery etiquette) to intermediate instruction (discussions of causes of faulty arrow flight, analysis of…

Computer-Aided Structural Engineering (CASE) Project. A Case Project Study of Finite Element Analysis of Concrete Flat Slabs.

DTIC Science & Technology

1987-01-01

CLASSIFICATION OF THIS PAGE rWhon Dot Entered) REPORT DOCUMENTATION PAGE READ INSTRUCTIONS BEFORE COMPLETING FORM I REPORT NUMBER 12. GOVT ACCESSION NO. 3...TO 383 a 4o0IFY 1 10 3 FROM 33 TO 30 TO 30 10 33 TO 30 TO 30 TO 30 TO 33 eEI 3 ELEA 19 351 8 FROM Ss7 33 105860 41 toD 368 41 TO ON 33 TO 347 30

Studies of Learning and Self-Contained Educational Systems, 1973-1976

DTIC Science & Technology

1976-03-01

ISTKIW WORDS fCondnu» on reverse aide // neceeeary ««’ ’-dtntlly by block numb«; Leirning, teaching, memory, tutorial instruction. 20. AB ^RACT...poorly acquired or because the learner might have missed exposi -e to that part of the material, then the rest of the structure is weakened and may...War in the computer data bsnt, including the causal structure of the actions during the war. We are ab ]^ to use the data base to interact with a

An Approach to Providing a User Interface for Military Computer-Aided- Instruction in 1980

DTIC Science & Technology

1975-11-01

commercial terminals is the use of a microprocessor unit ( MPU ) LSI chip controller. This technology is flexible and economical •nd can be expected to...various «•gmentt. By using an MPU and developing a software capability, tha vendor can quickly and economically satisfy a large spsctrum of user...the basis for an effective and economical jser interface to military CAI systems. •a. sicumrv CLAMincATioH or THIS P**;:^*— D*. K*fn4) ^vmm m m r

Compiler-Assisted Multiple Instruction Rollback Recovery Using a Read Buffer. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Alewine, Neal Jon

1993-01-01

Multiple instruction rollback (MIR) is a technique to provide rapid recovery from transient processor failures and was implemented in hardware by researchers and slow in mainframe computers. Hardware-based MIR designs eliminate rollback data hazards by providing data redundancy implemented in hardware. Compiler-based MIR designs were also developed which remove rollback data hazards directly with data flow manipulations, thus eliminating the need for most data redundancy hardware. Compiler-assisted techniques to achieve multiple instruction rollback recovery are addressed. It is observed that data some hazards resulting from instruction rollback can be resolved more efficiently by providing hardware redundancy while others are resolved more efficiently with compiler transformations. A compiler-assisted multiple instruction rollback scheme is developed which combines hardware-implemented data redundancy with compiler-driven hazard removal transformations. Experimental performance evaluations were conducted which indicate improved efficiency over previous hardware-based and compiler-based schemes. Various enhancements to the compiler transformations and to the data redundancy hardware developed for the compiler-assisted MIR scheme are described and evaluated. The final topic deals with the application of compiler-assisted MIR techniques to aid in exception repair and branch repair in a speculative execution architecture.

Metrics for Nurses Aides.

ERIC Educational Resources Information Center

Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

Designed to meet the job-related metric measurement needs of students interested in becoming nurses aides, this instructional package is one of five for the health occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational terminology,…

Educational Technology: Best Practices from America's Schools.

ERIC Educational Resources Information Center

Bozeman, William C.; Baumbach, Donna J.

This book begins with an overview of computer technology concepts, including computer system configurations, computer communications, and software. Instructional computer applications are then discussed; topics include computer-assisted instruction, computer-managed instruction, computer-enhanced instruction, LOGO, authoring programs, presentation…

Usability and User Satisfaction of Multimedia Instructional Message (MIM) for Packet Tracer Simulation

ERIC Educational Resources Information Center

Elias, Mohd Syahrizad; Mohamad Ali, Ahmad Zamzuri

2016-01-01

Simulation-aided learning has capability in improving student's learning performance. However, the positive effect of simulation-aided learning still being discussed, which at times has not played the purported role expected. To address these problems, Multimedia Instructional Message (MIM) appeared to be an essential supporting tool in ensuring…

The Impacts of a Web-Aided Instructional Simulation on Science Learning.

ERIC Educational Resources Information Center

Hsu, Ying-Shao; Thomas, Rex A.

2002-01-01

Investigates the effects of selected characteristics of a web-aided instructional simulation on students' conceptual change, problem solving, and transfer abilities. Conducts a two-pronged research study with (n=117) students enrolled in a beginning meteorology course at Iowa State University. Compares three groups--with-log group, without-log…

Level of Interactivity of Videodisc Instruction on College Students' Recall of AIDS Information.

ERIC Educational Resources Information Center

Kritch, Kale M.; And Others

1995-01-01

Two experiments confirmed the greater effectiveness of constructed-response interactive videodisc instruction when compared to a click-to-continue or passive viewing formats on posttest recall of Acquired Immune Deficiency Syndrome (AIDS) information by 101 college students. The necessity of constructing answers appears to be an important factor…

Presentation Technology in the Age of Electronic Eloquence: From Visual Aid to Visual Rhetoric

ERIC Educational Resources Information Center

Cyphert, Dale

2007-01-01

Attention to presentation technology in the public speaking classroom has grown along with its contemporary use, but instruction generally positions the topic as a subset of visual aids. As contemporary public discourse enters an age of electronic eloquence, instructional focus on verbal communication might limit students' capacity to effectively…

Corpus-Aided Business English Collocation Pedagogy: An Empirical Study in Chinese EFL Learners

ERIC Educational Resources Information Center

Chen, Lidan

2017-01-01

This study reports an empirical study of an explicit instruction of corpus-aided Business English collocations and verifies its effectiveness in improving learners' collocation awareness and learner autonomy, as a result of which is significant improvement of learners' collocation competence. An eight-week instruction in keywords' collocations,…

Novice Interpretations of Progress Monitoring Graphs: Extreme Values and Graphical Aids

ERIC Educational Resources Information Center

Newell, Kirsten W.; Christ, Theodore J.

2017-01-01

Curriculum-Based Measurement of Reading (CBM-R) is frequently used to monitor instructional effects and evaluate response to instruction. Educators often view the data graphically on a time-series graph that might include a variety of statistical and visual aids, which are intended to facilitate the interpretation. This study evaluated the effects…

MATRIS Indexing and Retrieval Thesaurus (MIRT): Keyword Out of Context (KWOC)

DTIC Science & Technology

1994-08-01

ESTEEM Self ESTEEM ... esteem Fiqcq SELF -ASSESSMENT SELF -ASSESSMENT Geqc SELF -ASSESSMENT tests Vqq SELF -PACED SELF -PACED instruction Ehga I SELF -STUDY SELF -STUDY aids Elm...AIDS Mh Self -study AIDS Elm Skill development AIDS Elk Retrieval AIDS Yc Visual AIDS Yg Training AIDS / materials effectiveness Ewkm Training

Computer applications in remote sensing education

NASA Technical Reports Server (NTRS)

Danielson, R. L.

1980-01-01

Computer applications to instruction in any field may be divided into two broad generic classes: computer-managed instruction and computer-assisted instruction. The division is based on how frequently the computer affects the instructional process and how active a role the computer affects the instructional process and how active a role the computer takes in actually providing instruction. There are no inherent characteristics of remote sensing education to preclude the use of one or both of these techniques, depending on the computer facilities available to the instructor. The characteristics of the two classes are summarized, potential applications to remote sensing education are discussed, and the advantages and disadvantages of computer applications to the instructional process are considered.

Promoting Intrinsic and Extrinsic Motivation among Chemistry Students Using Computer-Assisted Instruction

ERIC Educational Resources Information Center

Gambari, Isiaka A.; Gbodi, Bimpe E.; Olakanmi, Eyitao U.; Abalaka, Eneojo N.

2016-01-01

The role of computer-assisted instruction in promoting intrinsic and extrinsic motivation among Nigerian secondary school chemistry students was investigated in this study. The study employed two modes of computer-assisted instruction (computer simulation instruction and computer tutorial instructional packages) and two levels of gender (male and…

Interactive orbital proximity operations planning system instruction and training guide

NASA Technical Reports Server (NTRS)

Grunwald, Arthur J.; Ellis, Stephen R.

1994-01-01

This guide instructs users in the operation of a Proximity Operations Planning System. This system uses an interactive graphical method for planning fuel-efficient rendezvous trajectories in the multi-spacecraft environment of the space station and allows the operator to compose a multi-burn transfer trajectory between orbit initial chaser and target trajectories. The available task time (window) of the mission is predetermined and the maneuver is subject to various operational constraints, such as departure, arrival, spatial, plume impingement, and en route passage constraints. The maneuvers are described in terms of the relative motion experienced in a space station centered coordinate system. Both in-orbital plane as well as out-of-orbital plane maneuvering is considered. A number of visual optimization aids are used for assisting the operator in reaching fuel-efficient solutions. These optimization aids are based on the Primer Vector theory. The visual feedback of trajectory shapes, operational constraints, and optimization functions, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool is an example of operator-assisted optimization of nonlinear cost functions.

Assembly and Insertion of a Self-Fitting Hearing Aid

PubMed Central

Hickson, Louise; Meyer, Carly

2011-01-01

A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were “very easy” to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content. PMID:22389434

How Do Professional Learning Communities Aid and Hamper Professional Learning of Beginning Teachers Related to Differentiated Instruction?

ERIC Educational Resources Information Center

De Neve, Debbie; Devos, Geert

2017-01-01

Research has shown that adequate support from the school environment is necessary to help beginning teachers in applying differentiated instruction (DI), but how schools can aid in this process remains unclear. This qualitative study explores how professional learning communities (PLCs), an indicator of a supportive school environment, can enhance…

Evaluation of an Ink Print Reading Aid for the Blind: The Stereotoner. Final Report.

ERIC Educational Resources Information Center

Weisgerber, Robert A.; And Others

Evaluated with 30 trainees (age 12 - adult) was the Stereotoner (a chest-worn, ink print reading aid for the blind) in order to develop specialized instructional materials; coordinate a program of instruction; evaluate candidates, processes, and outcomes of training; and make available the basic course materials developed during the study. The…

Zielstrebiger Einsatz von Unterrichtsmitteln und Ausbau des Fachunterrichtsraumsystems (Goal-oriented Introduction of Teaching Aids and Development of Physical Area for Language Teaching)

ERIC Educational Resources Information Center

Hoffmann, Werner

1974-01-01

Contains remarks concerning lesson orientation in the use of the obligatory instructional aids and of reserves of teaching materials, also in relation to minimal requirements in the development of the physical teaching area for foreign language instruction. (Text is in German.) (IFS/WGA)

Evaluation of Computer-aided Strategies for Teaching Medical Students Prenatal Ultrasound Diagnostic Skills.

PubMed

Amesse, Lawrence S; Callendar, Ealena; Pfaff-Amesse, Teresa; Duke, Janice; Herbert, William N P

2008-09-24

To evaluate whether computer-based learning (CBL) improves newly acquired knowledge and is an effective strategy for teaching prenatal ultrasound diagnostic skills to third-year medical students when compared with instruction by traditional paper-based methods (PBM). We conducted a randomized, prospective study involving volunteer junior (3(rd) year) medical students consecutively rotating through the Obstetrics and Gynecology clerkship during six months of the 2005-2006 academic year. The students were randomly assigned to permuted blocks and divided into two groups. Half of the participants received instruction in prenatal ultrasound diagnostics using an interactive CBL program; the other half received instruction using equivalent material by the traditional PBM. Outcomes were evaluated by comparing changes in pre-tutorial and post instruction examination scores. All 36 potential participants (100%) completed the study curriculum. Students were divided equally between the CBL (n = 18) and PBM (n = 18) groups. Pre-tutorial exam scores (mean+/-s.d.) were 44%+/-11.1% for the CBL group and 44%+/-10.8% for the PBL cohort, indicating no statistically significant differences (p>0.05) between the two groups. After instruction, post-tutorial exam scores (mean+/-s.d.) were increased from the pre-tutorial scores, 74%+/-11% and 67%+/-12%, for students in the CBL and the PBM groups, respectively. The improvement in post-tutorial exam scores from the pre-test scores was considered significant (p<0.05). When post-test scores for the tutorial groups were compared, the CBL subjects achieved a score that was, on average, 7 percentage points higher than their PBM counterparts, a statistically significant difference (p < 0.05). Instruction by either CBL or PBM strategies is associated with improvements in newly acquired knowledge as reflected by increased post-tutorial examination scores. Students that received CBL had significantlyhigher post-tutorial exam scores than those in the PBM group, indicating that CBL is an effective instruction strategy in this setting.

Designing and Creating Computer-Assisted Instruction.

ERIC Educational Resources Information Center

McMeen, George R.

Designed to encourage the use of a defined methodology and careful planning in creating computer-assisted instructional programs, this paper describes the instructional design process, compares computer-assisted instruction (CAI) and programmed instruction (PI), and discusses pragmatic concerns in computer programming. Topics addressed include:…

TOWARD A COMPUTER BASED INSTRUCTIONAL SYSTEM.

ERIC Educational Resources Information Center

GARIGLIO, LAWRENCE M.; RODGERS, WILLIAM A.

THE INFORMATION FOR THIS REPORT WAS OBTAINED FROM VARIOUS COMPUTER ASSISTED INSTRUCTION INSTALLATIONS. COMPUTER BASED INSTRUCTION REFERS TO A SYSTEM AIMED AT INDIVIDUALIZED INSTRUCTION, WITH THE COMPUTER AS CENTRAL CONTROL. SUCH A SYSTEM HAS 3 MAJOR SUBSYSTEMS--INSTRUCTIONAL, RESEARCH, AND MANAGERIAL. THIS REPORT EMPHASIZES THE INSTRUCTIONAL…

Wusor II: A Computer Aided Instruction Program with Student Modelling Capabilities.

DTIC Science & Technology

1977-06-01

The Wun ,pus Advisor The Expert The Expert Chapter 3 Overview of the Expert From the work which was done on the expert of Wusor I, it was...network are numbered and represent caves. Circ led numbers represent caves which have been v is i ted by the player. To the top right of each v is i... ted cave is a marker for whether or not any warnings were sensed. (“U” indicates that a warn ing was sensed, and a “NW” means that a warning was not

Generating and executing programs for a floating point single instruction multiple data instruction set architecture

DOEpatents

Gschwind, Michael K

2013-04-16

Mechanisms for generating and executing programs for a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA) are provided. A computer program product comprising a computer recordable medium having a computer readable program recorded thereon is provided. The computer readable program, when executed on a computing device, causes the computing device to receive one or more instructions and execute the one or more instructions using logic in an execution unit of the computing device. The logic implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA), based on data stored in a vector register file of the computing device. The vector register file is configured to store both scalar and floating point values as vectors having a plurality of vector elements.

Verification of the FtCayuga fault-tolerant microprocessor system. Volume 2: Formal specification and correctness theorems

NASA Technical Reports Server (NTRS)

Bickford, Mark; Srivas, Mandayam

1991-01-01

Presented here is a formal specification and verification of a property of a quadruplicately redundant fault tolerant microprocessor system design. A complete listing of the formal specification of the system and the correctness theorems that are proved are given. The system performs the task of obtaining interactive consistency among the processors using a special instruction on the processors. The design is based on an algorithm proposed by Pease, Shostak, and Lamport. The property verified insures that an execution of the special instruction by the processors correctly accomplishes interactive consistency, providing certain preconditions hold, using a computer aided design verification tool, Spectool, and the theorem prover, Clio. A major contribution of the work is the demonstration of a significant fault tolerant hardware design that is mechanically verified by a theorem prover.

Technology-Aided Pictorial Cues to Support the Performance of Daily Activities by Persons with Moderate Alzheimer's Disease

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Perilli, Viviana; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

2012-01-01

We developed a technology-aided intervention strategy relying on pictorial cues alone or in combination with verbal instructions and assessed these two versions of the strategy with three persons with moderate Alzheimer's disease. In Section I of the study, the strategy version with pictorial cues plus verbal instructions was compared with an…

Technology-Aided Instruction and Intervention for Students with ASD: A Meta-Analysis Using Novel Methods of Estimating Effect Sizes for Single-Case Research

ERIC Educational Resources Information Center

Barton, Erin E.; Pustejovsky, James E.; Maggin, Daniel M.; Reichow, Brian

2017-01-01

The adoption of methods and strategies validated through rigorous, experimentally oriented research is a core professional value of special education. We conducted a systematic review and meta-analysis examining the experimental literature on Technology-Aided Instruction and Intervention (TAII) using research identified as part of the National…

Improvements to the fastex flutter analysis computer code

NASA Technical Reports Server (NTRS)

Taylor, Ronald F.

1987-01-01

Modifications to the FASTEX flutter analysis computer code (UDFASTEX) are described. The objectives were to increase the problem size capacity of FASTEX, reduce run times by modification of the modal interpolation procedure, and to add new user features. All modifications to the program are operable on the VAX 11/700 series computers under the VAX operating system. Interfaces were provided to aid in the inclusion of alternate aerodynamic and flutter eigenvalue calculations. Plots can be made of the flutter velocity, display and frequency data. A preliminary capability was also developed to plot contours of unsteady pressure amplitude and phase. The relevant equations of motion, modal interpolation procedures, and control system considerations are described and software developments are summarized. Additional information documenting input instructions, procedures, and details of the plate spline algorithm is found in the appendices.

Task Lists for Health Occupations. Radiologic Aide. Activity Aide. Optometric Assistant. Physical Therapy Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lathrop, Janice

These task lists contain employability skills and tasks for the following health occupations: radiologic aide, activity aide, physical therapy aide, and optometric assistant. The duties and tasks found in these lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs. Employability skills…

Alternative communication network designs for an operational Plato 4 CAI system

NASA Technical Reports Server (NTRS)

Mobley, R. E., Jr.; Eastwood, L. F., Jr.

1975-01-01

The cost of alternative communications networks for the dissemination of PLATO IV computer-aided instruction (CAI) was studied. Four communication techniques are compared: leased telephone lines, satellite communication, UHF TV, and low-power microwave radio. For each network design, costs per student contact hour are computed. These costs are derived as functions of student population density, a parameter which can be calculated from census data for one potential market for CAI, the public primary and secondary schools. Calculating costs in this way allows one to determine which of the four communications alternatives can serve this market least expensively for any given area in the U.S. The analysis indicates that radio distribution techniques are cost optimum over a wide range of conditions.

From Teaching Machines to Microcomputers: Some Milestones in the History of Computer-Based Instruction.

ERIC Educational Resources Information Center

Niemiec, Richard P.; Walberg, Herbert J.

1989-01-01

Examines the history of computer-based education within the context of psychological theorists of instruction, including Pressey, Thorndike, Skinner, and Crowder. Topics discussed include computer-managed instruction; computer-assisted instruction; the Computer Curriculum Corporation; PLATO; TICCIT; microcomputers; effects on students; and cost…

Aid for Aides.

ERIC Educational Resources Information Center

Townley, Arthur J.

1980-01-01

Recognizing the diversity in experience and training among teacher aides, the Yucaipa School District established a formal inservice program for this employee group. This article describes how the district developed a seminar program to help instructional aides in improving their skills. Reactions to the program were favorable. (Author/SJL)

Computer Games as Instructional Tools.

ERIC Educational Resources Information Center

Bright, George W.; Harvey, John G.

1984-01-01

Defines games, instructional games, and computer instructional games; discusses several unique capabilities that facilitate game playing and may make computer games more attractive to students than noncomputer alternatives; and examines the potential disadvantages of using instructional computer games on a regular basis. (MBR)

Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin.

PubMed

Roperto, Renato; Akkus, Anna; Akkus, Ozan; Lang, Lisa; Sousa-Neto, Manoel Damiao; Teich, Sorin; Porto, Thiago Soares

2016-01-01

The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies. In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturer's instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level. Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used. Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used.

Professional Teacher Education Module Series. Provide for the First Aid Needs of Students, Module E-6 of Category E--Instructional Management.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This sixth in a series of nine learning modules on instructional management is designed to assist secondary and postsecondary vocational teachers in establishing and maintaining a procedure for attending to the basic first aid needs of students. Introductory sections relate the competency dealt with in this module to others in the program and list…

Your Renewal FAFSA: Renewal Free Application for Federal Student Aid, July 1, 2001-June 30, 2002 School Year (2001-2002).

ERIC Educational Resources Information Center

Department of Education, Washington, DC.

This form is used to renew an application for federal and state student grants, work-study, and loans. The form begins with instructions, deadline dates for state student aid, and instructions on renewing an application on the Web. Sections of the application request borrower (student) information, student and spouse income and assets, student…

Computer-associated health complaints and sources of ergonomic instructions in computer-related issues among Finnish adolescents: a cross-sectional study.

PubMed

Hakala, Paula T; Saarni, Lea A; Ketola, Ritva L; Rahkola, Erja T; Salminen, Jouko J; Rimpelä, Arja H

2010-01-11

The use of computers has increased among adolescents, as have musculoskeletal symptoms. There is evidence that these symptoms can be reduced through an ergonomics approach and through education. The purpose of this study was to examine where adolescents had received ergonomic instructions related to computer use, and whether receiving these instructions was associated with a reduced prevalence of computer-associated health complaints. Mailed survey with nationally representative sample of 12 to 18-year-old Finns in 2001 (n = 7292, response rate 70%). In total, 6961 youths reported using a computer. We tested the associations of computer use time and received ergonomic instructions (predictor variables) with computer-associated health complaints (outcome variables) using logistic regression analysis. To prevent computer-associated complaints, 61.2% reported having been instructed to arrange their desk/chair/screen in the right position, 71.5% to take rest breaks. The older age group (16-18 years) reported receiving instructions or being self-instructed more often than the 12- to 14-year-olds (p < 0.001). Among both age groups the sources of instructions included school (33.1%), family (28.6%), self (self-instructed) (12.5%), ICT-related (8.6%), friends (1.5%) and health professionals (0.8%). Receiving instructions was not related to lower prevalence of computer-associated health complaints. This report shows that ergonomic instructions on how to prevent computer-related musculoskeletal problems fail to reach a substantial number of children. Furthermore, the reported sources of instructions vary greatly in terms of reliability.

Computer-associated health complaints and sources of ergonomic instructions in computer-related issues among Finnish adolescents: A cross-sectional study

PubMed Central

2010-01-01

Background The use of computers has increased among adolescents, as have musculoskeletal symptoms. There is evidence that these symptoms can be reduced through an ergonomics approach and through education. The purpose of this study was to examine where adolescents had received ergonomic instructions related to computer use, and whether receiving these instructions was associated with a reduced prevalence of computer-associated health complaints. Methods Mailed survey with nationally representative sample of 12 to 18-year-old Finns in 2001 (n = 7292, response rate 70%). In total, 6961 youths reported using a computer. We tested the associations of computer use time and received ergonomic instructions (predictor variables) with computer-associated health complaints (outcome variables) using logistic regression analysis. Results To prevent computer-associated complaints, 61.2% reported having been instructed to arrange their desk/chair/screen in the right position, 71.5% to take rest breaks. The older age group (16-18 years) reported receiving instructions or being self-instructed more often than the 12- to 14-year-olds (p < 0.001). Among both age groups the sources of instructions included school (33.1%), family (28.6%), self (self-instructed) (12.5%), ICT-related (8.6%), friends (1.5%) and health professionals (0.8%). Receiving instructions was not related to lower prevalence of computer-associated health complaints. Conclusions This report shows that ergonomic instructions on how to prevent computer-related musculoskeletal problems fail to reach a substantial number of children. Furthermore, the reported sources of instructions vary greatly in terms of reliability. PMID:20064250

Computer-Based Grammar Instruction in an EFL Context: Improving the Effectiveness of Teaching Adverbial Clauses

ERIC Educational Resources Information Center

Kiliçkaya, Ferit

2015-01-01

This study aims to find out whether there are any statistically significant differences in participants' achievements on three different types of instruction: computer-based instruction, teacher-driven instruction, and teacher-driven grammar supported by computer-based instruction. Each type of instruction follows the deductive approach. The…

Faculty Instructional Computer Use Model: Differentiating Instructional and Mainstream Computer Uses

ERIC Educational Resources Information Center

Sahin, Ismail

2008-01-01

The purpose of this research study was to explore predictor variables for faculty instructional computer use. Analysis of data collected from 198 college of education (COE) faculty members indicated that instructional computer use and mainstream computer use form two strong and distinct variables. This study also proposes a faculty instructional…

The Evolution of Instructional Design Principles for Intelligent Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Dede, Christopher; Swigger, Kathleen

1988-01-01

Discusses and compares the design and development of computer assisted instruction (CAI) and intelligent computer assisted instruction (ICAI). Topics discussed include instructional systems design (ISD), artificial intelligence, authoring languages, intelligent tutoring systems (ITS), qualitative models, and emerging issues in instructional…

Educational Television: Brazil.

ERIC Educational Resources Information Center

Bretz, R.; Shinar, D.

Based on evaluation of nine Brazilian educational television centers, an Instructional Television Training Model (ITV) was developed to aid in determining and designing training requirements for instructional television systems. Analysis based on this model would include these tasks: (1) determine instructional purpose of the television…

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

Visual-spatial cognition in children using aided communication.

PubMed

Stadskleiv, Kristine; Batorowicz, Beata; Massaro, Munique; van Balkom, Hans; von Tetzchner, Stephen

2018-03-01

Children with severe motor impairments are restricted in their manipulation and exploration of objects, but little is known about how such limitations influence cognitive development. This study investigated visual-constructional abilities in 75 children and adolescents, aged 5;0-15;11 (years;months), with severe speech impairments and no intellectual disabilities (aided group) and in 56 children and adolescents with typical development (reference group). Verbal comprehension, non-verbal reasoning, and visual-spatial perception were assessed with standardized tests. The task of the participants was to verbally instruct communication partners to make physical constructions identical to models that the partner could not see. In the aided group, 55.7% of the constructions were identical to the models participants described, compared to 91.3% in the reference group. In the aided group, test results explained 51.4% of the variance in construction errors. The results indicate that the participants' language skills were decisive for construction success. Visual-perceptual challenges were common among the aided communicators, and their instructions included little information about size and spatial relations. This may reflect less experience with object manipulation and construction than children with typical development, and using aided communication to instruct others to make three-dimensional constructions. The results imply a need for interventions that compensate for the lack of relevant experience.

Trends in computer hardware and software.

PubMed

Frankenfeld, F M

1993-04-01

Previously identified and current trends in the development of computer systems and in the use of computers for health care applications are reviewed. Trends identified in a 1982 article were increasing miniaturization and archival ability, increasing software costs, increasing software independence, user empowerment through new software technologies, shorter computer-system life cycles, and more rapid development and support of pharmaceutical services. Most of these trends continue today. Current trends in hardware and software include the increasing use of reduced instruction-set computing, migration to the UNIX operating system, the development of large software libraries, microprocessor-based smart terminals that allow remote validation of data, speech synthesis and recognition, application generators, fourth-generation languages, computer-aided software engineering, object-oriented technologies, and artificial intelligence. Current trends specific to pharmacy and hospitals are the withdrawal of vendors of hospital information systems from the pharmacy market, improved linkage of information systems within hospitals, and increased regulation by government. The computer industry and its products continue to undergo dynamic change. Software development continues to lag behind hardware, and its high cost is offsetting the savings provided by hardware.

Role of Computer Assisted Instruction (CAI) in an Introductory Computer Concepts Course.

ERIC Educational Resources Information Center

Skudrna, Vincent J.

1997-01-01

Discusses the role of computer assisted instruction (CAI) in undergraduate education via a survey of related literature and specific applications. Describes an undergraduate computer concepts course and includes appendices of instructions, flowcharts, programs, sample student work in accounting, COBOL instructional model, decision logic in a…

Why CBI? An Examination of the Case for Computer-Based Instruction.

ERIC Educational Resources Information Center

Dean, Peter M.

1977-01-01

Discussion of the use of computers in instruction includes the relationship of theory to practice, the interactive nature of computer instruction, an overview of the Keller Plan, cost considerations, strategy for use of computers in instruction and training, and a look at examination procedure. (RAO)

A Comparative Evaluation of Computer Based and Non-Computer Based Instructional Strategies.

ERIC Educational Resources Information Center

Emerson, Ian

1988-01-01

Compares the computer assisted instruction (CAI) tutorial with its non-computerized pedagogical roots: the Socratic Dialog with Skinner's Programmed Instruction. Tests the effectiveness of a CAI tutorial on diffusion and osmosis against four other interactive and non-interactive instructional strategies. Notes computer based strategies were…

The Application of Web-based Computer-assisted Instruction Courseware within Health Assessment

NASA Astrophysics Data System (ADS)

Xiuyan, Guo

Health assessment is a clinical nursing course and places emphasis on clinical skills. The application of computer-assisted instruction in the field of nursing teaching solved the problems in the traditional lecture class. This article stated teaching experience of web-based computer-assisted instruction, based upon a two-year study of computer-assisted instruction courseware use within the course health assessment. The computer-assisted instruction courseware could develop teaching structure, simulate clinical situations, create teaching situations and facilitate students study.

Simulation procedure for modeling transient water table and artesian stress and response

USGS Publications Warehouse

Reed, J.E.; Bedinger, M.S.; Terry, J.E.

1976-01-01

The series of computer programs described in this report were designed specifically to model the ground-water regime in sufficient detail to determine the effects of the imposition of various types of stress upon the system, and to display the results in a convenient manner during calibration and when presenting projected data. SUPERMOCK simulates the ground-water system and DATE and HYDROG aid in the display of computed data. During calibration, DATE is especially useful because it has the optional feature of comparing computed data with observed data. Although the programs can be run independently, experience dictates that for best results the three should be run as steps in the same job. English units of inches, feet, and days are used in each of the programs. The units for any parameters not given in the text are clearly specified in the instructions for input to the individual programs. (Woodard-USGS)

Foreign Language Instruction.

ERIC Educational Resources Information Center

Sawyer, Jesse O.

1964-01-01

This brief review of research in foreign language instruction during 1961-63 summarizes, compares, and interprets related studies dealing withsuch topics as (1) the effects and value of foreign language instruction at different educational levels, (2) methods and materials, (3) testing, and (4) electromechanical aids, such as the language…

Instructional Analysis for Health Occupations.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This instructional analysis centers on identifying the skills, related knowledge, teacher activities, and student activities that are central to teaching various topics included in the core curriculum for health occupations courses. Addressed in the volume are the following instructional areas: first aid; medical terminology; medical asepsis;…

A Usability Study of a Serious Game in Cognitive Rehabilitation: A Compensatory Navigation Training in Acquired Brain Injury Patients

PubMed Central

van der Kuil, Milan N. A.; Visser-Meily, Johanna M. A.; Evers, Andrea W. M.; van der Ham, Ineke J. M.

2018-01-01

Acquired brain injury patients often report navigation impairments. A cognitive rehabilitation therapy has been designed in the form of a serious game. The aim of the serious game is to aid patients in the development of compensatory navigation strategies by providing exercises in 3D virtual environments on their home computers. The objective of this study was to assess the usability of three critical gaming attributes: movement control in 3D virtual environments, instruction modality and feedback timing. Thirty acquired brain injury patients performed three tasks in which objective measures of usability were obtained. Mouse controlled movement was compared to keyboard controlled movement in a navigation task. Text-based instructions were compared to video-based instructions in a knowledge acquisition task. The effect of feedback timing on performance and motivation was examined in a navigation training game. Subjective usability ratings of all design options were assessed using questionnaires. Results showed that mouse controlled interaction in 3D environments is more effective than keyboard controlled interaction. Patients clearly preferred video-based instructions over text-based instructions, even though video-based instructions were not more effective in context of knowledge acquisition and comprehension. No effect of feedback timing was found on performance and motivation in games designed to train navigation abilities. Overall appreciation of the serious game was positive. The results provide valuable insights in the design choices that facilitate the transfer of skills from serious games to real-life situations. PMID:29922196

A Usability Study of a Serious Game in Cognitive Rehabilitation: A Compensatory Navigation Training in Acquired Brain Injury Patients.

PubMed

van der Kuil, Milan N A; Visser-Meily, Johanna M A; Evers, Andrea W M; van der Ham, Ineke J M

2018-01-01

Acquired brain injury patients often report navigation impairments. A cognitive rehabilitation therapy has been designed in the form of a serious game. The aim of the serious game is to aid patients in the development of compensatory navigation strategies by providing exercises in 3D virtual environments on their home computers. The objective of this study was to assess the usability of three critical gaming attributes: movement control in 3D virtual environments, instruction modality and feedback timing. Thirty acquired brain injury patients performed three tasks in which objective measures of usability were obtained. Mouse controlled movement was compared to keyboard controlled movement in a navigation task. Text-based instructions were compared to video-based instructions in a knowledge acquisition task. The effect of feedback timing on performance and motivation was examined in a navigation training game. Subjective usability ratings of all design options were assessed using questionnaires. Results showed that mouse controlled interaction in 3D environments is more effective than keyboard controlled interaction. Patients clearly preferred video-based instructions over text-based instructions, even though video-based instructions were not more effective in context of knowledge acquisition and comprehension. No effect of feedback timing was found on performance and motivation in games designed to train navigation abilities. Overall appreciation of the serious game was positive. The results provide valuable insights in the design choices that facilitate the transfer of skills from serious games to real-life situations.

SBOL Visual: A Graphical Language for Genetic Designs.

PubMed

Quinn, Jacqueline Y; Cox, Robert Sidney; Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J; Le Novère, Nicolas; Maheshwari, Akshay J; McLaughlin, James Alastair; Myers, Chris J; P, Umesh; Pocock, Matthew; Rodriguez, Cesar; Soldatova, Larisa; Stan, Guy-Bart V; Swainston, Neil; Wipat, Anil; Sauro, Herbert M

2015-12-01

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. It consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual.

Machine Tool Software

NASA Technical Reports Server (NTRS)

1988-01-01

A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

A Big RISC

DTIC Science & Technology

1983-07-18

architecture . Design , performance, and cost of BRISC is presented. Performance is shown to be better than high end mainframes such as the IBM 3081 and Amdahl 470V/8 on integer benchmarks written in C, Pascal and LISP. The cost, conservatively estimated to be $132,400 is about the same as a high end minicomputer such as the VAX-11/780. BRISC has a CPU cycle time of 46 ns, providing a RISC I instruction execution rate of greater than 15 MIPs. BRISC is designed with a Structured Computer Aided Logic Design System (SCALD) by Valid Logic Systems. An evaluation of the utility of

Low-Cost Aids for Elementary Science Teaching in Asia and the Pacific.

ERIC Educational Resources Information Center

National Inst. for Educational Research, Tokyo (Japan).

Regional workshops sponsored by the National Institute for Educational Research (Japan) were held to strengthen national efforts in the development of elementary science aids/materials. This document provides: (1) guidelines for the development of appropriate and low-cost aids for science instruction; (2) inventory of aids; (3) synthesis of…

46 CFR 121.710 - First-aid kits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent contents and instructions. For equivalent...

46 CFR 121.710 - First-aid kits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent contents and instructions. For equivalent...

46 CFR 121.710 - First-aid kits.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent contents and instructions. For equivalent...

46 CFR 121.710 - First-aid kits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent contents and instructions. For equivalent...

Cognitive engineering of film library transition from film medium to digital environment in a Texas teaching hospital.

PubMed

Koperwhats, Martha A; Chang, Wei-Chih; Xiao, Jianguo

2002-01-01

Digital imaging technology promises efficient, economical, and fast service for patient care, but the challenges are great in the transition from film to a filmless (digital) environment. This change has a significant impact on the film library's personnel (film librarians) who play a leading roles in storage, classification, and retrieval of images. The objectives of this project were to study film library errors and the usability of a physical computerized system that could not be changed, while developing an intervention to reduce errors and test the usability of the intervention. Cognitive and human factors analysis were used to evaluate human-computer interaction. A workflow analysis was performed to understand the film and digital imaging processes. User and task analyses were applied to account for all behaviors involved in interaction with the system. A heuristic evaluation was used to probe the usability issues in the picture archiving and communication systems (PACS) modules. Simplified paper-based instructions were designed to familiarize the film librarians with the digital system. A usability survey evaluated the effectiveness of the instruction. The user and task analyses indicated that different users faced challenges based on their computer literacy, education, roles, and frequency of use of diagnostic imaging. The workflow analysis showed that the approaches to using the digital library differ among the various departments. The heuristic evaluation of the PACS modules showed the human-computer interface to have usability issues that prevented easy operation. Simplified instructions were designed for operation of the modules. Usability surveys conducted before and after revision of the instructions showed that performance improved. Cognitive and human factor analysis can help film librarians and other users adapt to the filmless system. Use of cognitive science tools will aid in successful transition of the film library from a film environment to a digital environment.

DOEDEF Software System, Version 2. 2: Operational instructions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meirans, L.

The DOEDEF (Department of Energy Data Exchange Format) Software System is a collection of software routines written to facilitate the manipulation of IGES (Initial Graphics Exchange Specification) data. Typically, the IGES data has been produced by the IGES processors for a Computer-Aided Design (CAD) system, and the data manipulations are user-defined ''flavoring'' operations. The DOEDEF Software System is used in conjunction with the RIM (Relational Information Management) DBMS from Boeing Computer Services (Version 7, UD18 or higher). The three major pieces of the software system are: Parser, reads an ASCII IGES file and converts it to the RIM database equivalent;more » Kernel, provides the user with IGES-oriented interface routines to the database; and Filewriter, writes the RIM database to an IGES file.« less

Computer Managed Instruction - Is It A System For Your School?

ERIC Educational Resources Information Center

Bozeman, William C.

1979-01-01

Presented is a primer providing the distinction between computer-assisted instruction and computer-managed instruction (CMI), as well as application notes on how CMI contributes to cost-effective achievement of individualized instruction and enhanced student learning. (Author/BB)

Program Descriptions for Art-Music Instructional Materials.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

California state-adopted commercial art and music instructional materials are described to aid state school districts in matching instructional materials with curriculum goals and objectives. Information is provided in three sections. An annotated index gives pertinent information about each program, including title, year of copyright, and grade…

Teacher's Directory of Reading Skill Aids and Materials.

ERIC Educational Resources Information Center

Dechant, Emerald

Intended to help reading teachers match pupil needs and deficiencies with specific instructional materials, this volume contains more than 2,000 print and audiovisual instructional materials for reading instruction. Citations, which include objectives, grade level, publisher, and format, are grouped into the following sections: (1) developing the…

Evaluator's Guide for Microcomputer-Based Instructional Packages. Revised.

ERIC Educational Resources Information Center

International Council for Computers in Education, Eugene, OR.

Two instruments have been developed to aid teachers and other educators in evaluating educational software and courseware: the "Courseware Description" form and the "Courseware Evaluation" form. Complete instructions for using both forms are provided in this guide, along with the forms themselves. Prior to the instructions is…

Low cost training aids and devices

NASA Technical Reports Server (NTRS)

Lawver, J.; Lee, A.

1984-01-01

The need for advanced flight simulators for two engine aircraft is discussed. Cost effectiveness is a major requirement. Other training aids available for increased effectiveness are recommended. Training aids include: (1) audio-visual slides; (2) information transfer; (3) programmed instruction; and (4) interactive training systems.

Computer-Assisted Instruction in the Context of the Advanced Instructional System: Authoring Support Software. Final Report.

ERIC Educational Resources Information Center

Montgomery, Ann D.; Judd, Wilson A.

This report details the design, development, and implementation of computer software to support the cost-effective production of computer assisted instruction (CAI) within the context of the Advanced Instructional System (AIS) located at Lowry Air Force Base. The report supplements the computer managed Air Force technical training that is…

Perceptual Influence of Ugandan Biology Students' Understanding of HIV/AIDS

NASA Astrophysics Data System (ADS)

Mutonyi, Harriet; Nashon, Samson; Nielsen, Wendy S.

2010-08-01

In Uganda, curbing the spread of HIV/AIDS has largely depended on public and private media messages about the disease. Media campaigns based on Uganda’s cultural norms of communication are metaphorical, analogical and simile-like. The topic of HIV/AIDS has been introduced into the Senior Three (Grade 11) biology curriculum in Uganda. To what extent do students’ pre-conceptions of the disease, based on these media messages influence students’ development of conceptual understanding of the disease, its transmission and prevention? Of significant importance is the impact the conceptions students have developed from the indirect media messages on classroom instruction on HIV/AIDS. The study is based in a theoretical framework of conceptual change in science learning. An interpretive case study to determine the impact of Ugandan students’ conceptions or perceptions on classroom instruction about HIV/AIDS, involving 160 students aged 15-17, was conducted in four different Ugandan high schools: girls boarding, boys boarding, mixed boarding, and mixed day. Using questionnaires, focus group discussions, recorded biology lessons and informal interviews, students’ preconceptions of HIV/AIDS and how these impact lessons on HIV/AIDS were discerned. These preconceptions fall into four main categories: religious, political, conspiracy and traditional African worldviews. Results of data analysis suggest that students’ prior knowledge is persistent even after biology instructions. This has implications for current teaching approaches, which are mostly teacher-centred in Ugandan schools. A rethinking of the curriculum with the intent of offering science education programs that promote understanding of the science of HIV/AIDS as opposed to what is happening now—insensitivity to misconceptions about the disease—is needed.

Computer-assisted instruction

NASA Technical Reports Server (NTRS)

Atkinson, R. C.

1974-01-01

The results are presented of a project of research and development on strategies for optimizing the instructional process, and dissemination of information about the applications of such research to the instructional medium of computer-assisted instruction. Accomplishments reported include construction of the author language INSTRUCT, construction of a practical CAI course in the area of computer science, and a number of investigations into the individualization of instruction, using the course as a vehicle.

Effects of Computer-Assisted Instruction on Students' Knowledge of the Self-Determined Learning Model of Instruction and Disruptive Behavior

ERIC Educational Resources Information Center

Mazzotti, Valerie L.; Wood, Charles L.; Test, David W.; Fowler, Catherine H.

2012-01-01

Instruction about goal setting can increase students' self-determination and reduce problem behavior. Computer-assisted instruction could offer teachers another format for teaching goal setting and self-determination. This study used a multiple probes across participants design to examine the effects of computer-assisted instruction on students'…

Learning Designs Using Flipped Classroom Instruction (Conception d'apprentissage à l'aide de l'instruction en classe inversée)

ERIC Educational Resources Information Center

Mazur, Amber D.; Brown, Barbara; Jacobsen, Michele

2015-01-01

The flipped classroom is an instructional model that leverages technology-enhanced instruction outside of class time in order to maximize student engagement and learning during class time. As part of an action research study, the authors synthesize reflections about how the flipped classroom model can support teaching, learning and assessment…

Pulmonary lobar volumetry using novel volumetric computer-aided diagnosis and computed tomography

PubMed Central

Iwano, Shingo; Kitano, Mariko; Matsuo, Keiji; Kawakami, Kenichi; Koike, Wataru; Kishimoto, Mariko; Inoue, Tsutomu; Li, Yuanzhong; Naganawa, Shinji

2013-01-01

OBJECTIVES To compare the accuracy of pulmonary lobar volumetry using the conventional number of segments method and novel volumetric computer-aided diagnosis using 3D computed tomography images. METHODS We acquired 50 consecutive preoperative 3D computed tomography examinations for lung tumours reconstructed at 1-mm slice thicknesses. We calculated the lobar volume and the emphysematous lobar volume < −950 HU of each lobe using (i) the slice-by-slice method (reference standard), (ii) number of segments method, and (iii) semi-automatic and (iv) automatic computer-aided diagnosis. We determined Pearson correlation coefficients between the reference standard and the three other methods for lobar volumes and emphysematous lobar volumes. We also compared the relative errors among the three measurement methods. RESULTS Both semi-automatic and automatic computer-aided diagnosis results were more strongly correlated with the reference standard than the number of segments method. The correlation coefficients for automatic computer-aided diagnosis were slightly lower than those for semi-automatic computer-aided diagnosis because there was one outlier among 50 cases (2%) in the right upper lobe and two outliers among 50 cases (4%) in the other lobes. The number of segments method relative error was significantly greater than those for semi-automatic and automatic computer-aided diagnosis (P < 0.001). The computational time for automatic computer-aided diagnosis was 1/2 to 2/3 than that of semi-automatic computer-aided diagnosis. CONCLUSIONS A novel lobar volumetry computer-aided diagnosis system could more precisely measure lobar volumes than the conventional number of segments method. Because semi-automatic computer-aided diagnosis and automatic computer-aided diagnosis were complementary, in clinical use, it would be more practical to first measure volumes by automatic computer-aided diagnosis, and then use semi-automatic measurements if automatic computer-aided diagnosis failed. PMID:23526418

A Guide to Instructional Resources for Consumers' Education.

ERIC Educational Resources Information Center

Johnston, William L.; Greenspan, Nancy B.

This annotated bibliography lists 295 selected instructional references, resources, and teaching aids for consumer education. It includes a variety of both print and nonprint materials, such as films, filmstrips, multimedia kits, games and learning packages for classroom and group instruction, textbooks for all age levels, and references for both…

Sustaining Innovation: Developing an Instructional Technology Assessment Process

ERIC Educational Resources Information Center

Carmo, Monica Cristina

2013-01-01

This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

Quality Instruction as a Motivating Factor in Higher Education

ERIC Educational Resources Information Center

Sogunro, Olusegun A.

2017-01-01

The importance of quality instruction in motivating students in higher education cannot be overemphasized. Without quality instruction, students' motivation to learn recedes. Five focus groups of graduate students aided the data collection for this study. More than one-third of the 119 participating graduate students involved in this study claimed…

Two-Year Core Curriculum for Agricultural Education in Montana. Revised.

ERIC Educational Resources Information Center

Montana State Univ., Bozeman. Dept. of Agricultural and Industrial Education.

This guide contains suggested units of instruction for the first two years of instruction in secondary vocational agriculture. It is intended to aid teachers and administrators in planning instructional programs to equip students with essential basic competencies required for more specialized programs. Instructor materials include information on…

New Pedagogical Approaches to Improve Production of Materials in Distance Education.

ERIC Educational Resources Information Center

Mena, Marta

1992-01-01

Analyzes problems involved in the production of instructional materials for distance education and offers new pedagogical approaches to improve production of materials for distance education. Discusses past, present, and future methods used to design instructional materials, proposes models to aid in the production of instructional materials, and…

The Computer as Adaptive Instructional Decision Maker.

ERIC Educational Resources Information Center

Kopstein, Felix F.; Seidel, Robert J.

The computer's potential for education, and most particularly for instruction, is contingent on the development of a class of instructional decision models (formal instructional strategies) that interact with the student through appropriate peripheral equipment (man-machine interfaces). Computer hardware and software by themselves should not be…

Improving community health worker use of malaria rapid diagnostic tests in Zambia: package instructions, job aid and job aid-plus-training

PubMed Central

Harvey, Steven A; Jennings, Larissa; Chinyama, Masela; Masaninga, Fred; Mulholland, Kurt; Bell, David R

2008-01-01

Background Introduction of artemisinin combination therapy (ACT) has boosted interest in parasite-based malaria diagnosis, leading to increased use of rapid diagnostic tests (RDTs), particularly in rural settings where microscopy is limited. With donor support, national malaria control programmes are now procuring large quantities of RDTs. The scarcity of health facilities and trained personnel in many sub-Saharan African countries means that limiting RDT use to such facilities would exclude a significant proportion of febrile cases. RDT use by volunteer community health workers (CHWs) is one alternative, but most sub-Saharan African countries prohibit CHWs from handling blood, and little is known about CHW ability to use RDTs safely and effectively. This Zambia-based study was designed to determine: (i) whether Zambian CHWs could prepare and interpret RDTs accurately and safely using manufacturer's instructions alone; (ii) whether simple, mostly pictorial instructions (a "job aid") could raise performance to adequate levels; and (iii) whether a brief training programme would produce further improvement. Methods The job aid and training programme were based on formative research with 32 CHWs in Luangwa District. The study team then recruited three groups of CHWs in Chongwe and Chibombo districts. All had experience treating malaria based on clinical diagnosis, but only six had prior RDT experience. Trained observers used structured observation checklists to score each participant's preparation of three RDTs. Each also read 10 photographs showing different test results. The first group (n = 32) was guided only by manufacturer's instructions. The second (n = 21) used only the job aid. The last (n = 26) used the job aid after receiving a three-hour training. Results Mean scores, adjusted for education, age, gender and experience, were 57% of 16 RDT steps correctly completed for group 1, 80% for group 2, and 92% for group 3. Mean percentage of test results interpreted correctly were 54% (group 1), 80% (group 2), and 93% (group 3). All differences were statistically significant (p < 0.05). Conclusion Manufacturer's instructions like those provided with the RDTs used in this study are insufficient to ensure safe and accurate use by CHWs. However, well-designed instructions plus training can ensure high performance. More study is underway to determine how well this performance holds up over time. PMID:18718028

Improving community health worker use of malaria rapid diagnostic tests in Zambia: package instructions, job aid and job aid-plus-training.

PubMed

Harvey, Steven A; Jennings, Larissa; Chinyama, Masela; Masaninga, Fred; Mulholland, Kurt; Bell, David R

2008-08-22

Introduction of artemisinin combination therapy (ACT) has boosted interest in parasite-based malaria diagnosis, leading to increased use of rapid diagnostic tests (RDTs), particularly in rural settings where microscopy is limited. With donor support, national malaria control programmes are now procuring large quantities of RDTs. The scarcity of health facilities and trained personnel in many sub-Saharan African countries means that limiting RDT use to such facilities would exclude a significant proportion of febrile cases. RDT use by volunteer community health workers (CHWs) is one alternative, but most sub-Saharan African countries prohibit CHWs from handling blood, and little is known about CHW ability to use RDTs safely and effectively. This Zambia-based study was designed to determine: (i) whether Zambian CHWs could prepare and interpret RDTs accurately and safely using manufacturer's instructions alone; (ii) whether simple, mostly pictorial instructions (a "job aid") could raise performance to adequate levels; and (iii) whether a brief training programme would produce further improvement. The job aid and training programme were based on formative research with 32 CHWs in Luangwa District. The study team then recruited three groups of CHWs in Chongwe and Chibombo districts. All had experience treating malaria based on clinical diagnosis, but only six had prior RDT experience. Trained observers used structured observation checklists to score each participant's preparation of three RDTs. Each also read 10 photographs showing different test results. The first group (n = 32) was guided only by manufacturer's instructions. The second (n = 21) used only the job aid. The last (n = 26) used the job aid after receiving a three-hour training. Mean scores, adjusted for education, age, gender and experience, were 57% of 16 RDT steps correctly completed for group 1, 80% for group 2, and 92% for group 3. Mean percentage of test results interpreted correctly were 54% (group 1), 80% (group 2), and 93% (group 3). All differences were statistically significant (p < 0.05). Manufacturer's instructions like those provided with the RDTs used in this study are insufficient to ensure safe and accurate use by CHWs. However, well-designed instructions plus training can ensure high performance. More study is underway to determine how well this performance holds up over time.

The Kindergarten Student Aide: Procedures and Practices in the Kindergarten Classroom.

ERIC Educational Resources Information Center

Baker, Betty Ruth; Curtis, K. Fred

Provided are guidelines for student participation in kindergarten classrooms under the aegis of the Baylor University Kindergarten Student Aide Program. The guidelines specify requirements and responsibilities of student aides; suggest environmental, instructional, and student variables for observation; and provide recommendations for student…

BIBLIOGRAPHY OF TRAINING AIDS.

ERIC Educational Resources Information Center

MCKEONE, CHARLES J.

THIS COMPILATION OF INSTRUCTIONAL AIDS FOR USE IN AIR-CONDITIONING AND REFRIGERATION TRAINING PROGRAMS CONTAINS LISTS OF VISUAL AND AUDIOVISUAL TRAINING AIDS AND GUEST LECTURERS AVAILABLE FROM MEMBER COMPANIES OF THE AIR-CONDITIONING AND REFRIGERATION INSTITUTE AS AN INDUSTRY SERVICE TO SCHOOL OFFICIALS INTERESTED IN CONDUCTING SUCH PROGRAMS. THE…

Comparison of Computer Based Instruction to Behavior Skills Training for Teaching Staff Implementation of Discrete-Trial Instruction with an Adult with Autism

ERIC Educational Resources Information Center

Nosik, Melissa R.; Williams, W. Larry; Garrido, Natalia; Lee, Sarah

2013-01-01

In the current study, behavior skills training (BST) is compared to a computer based training package for teaching discrete trial instruction to staff, teaching an adult with autism. The computer based training package consisted of instructions, video modeling and feedback. BST consisted of instructions, modeling, rehearsal and feedback. Following…

"I Can Sort of Slot into Many Different Roles": Examining Teacher Aide Roles and Their Implications for Practice

ERIC Educational Resources Information Center

Harris, Lois Ruth; Aprile, Kerry Therese

2015-01-01

This study utilised role theory to investigate teacher aide roles within regional schools in Queensland, Australia. Twenty primary schoolteacher aides were interviewed; data were triangulated with 27 teacher aides' responses to a follow-up questionnaire and interviews with 6 administrative staff. Data suggest that classroom instructional support…

16 CFR 1500.134 - Policy on first aid labeling for saline emesis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Policy on first aid labeling for saline... REGULATIONS § 1500.134 Policy on first aid labeling for saline emesis. (a) This section states the Consumer Product Safety Commission's policy concerning first aid instructions for the use of a salt solution to...

The Effects of Computer Instruction on College Students' Reading Skills.

ERIC Educational Resources Information Center

Kuehner, Alison V.

1999-01-01

Reviews research concerning computer-based reading instruction for college students. Finds that most studies suggest that computers can provide motivating and efficient learning, but it is not clear whether the computer, or the instruction via computer, accounts for student gains. Notes many methodological flaws in the studies. Suggests…

University Faculty Teaching Activities in an Electronic Curriculum.

ERIC Educational Resources Information Center

Eisner, John; Carter, Thomas

1989-01-01

Discusses the changes in the instructional activities of university faculty members as a result of new computer-related educational technologies. Topics discussed include computer-assisted instruction; computer-managed instruction; optical discs; microcomputers; lecturing versus computer-based tutorials; videodiscs; computerized evaluative…

The Design of Model-Based Training Programs

NASA Technical Reports Server (NTRS)

Polson, Peter; Sherry, Lance; Feary, Michael; Palmer, Everett; Alkin, Marty; McCrobie, Dan; Kelley, Jerry; Rosekind, Mark (Technical Monitor)

1997-01-01

This paper proposes a model-based training program for the skills necessary to operate advance avionics systems that incorporate advanced autopilots and fight management systems. The training model is based on a formalism, the operational procedure model, that represents the mission model, the rules, and the functions of a modem avionics system. This formalism has been defined such that it can be understood and shared by pilots, the avionics software, and design engineers. Each element of the software is defined in terms of its intent (What?), the rationale (Why?), and the resulting behavior (How?). The Advanced Computer Tutoring project at Carnegie Mellon University has developed a type of model-based, computer aided instructional technology called cognitive tutors. They summarize numerous studies showing that training times to a specified level of competence can be achieved in one third the time of conventional class room instruction. We are developing a similar model-based training program for the skills necessary to operation the avionics. The model underlying the instructional program and that simulates the effects of pilots entries and the behavior of the avionics is based on the operational procedure model. Pilots are given a series of vertical flightpath management problems. Entries that result in violations, such as failure to make a crossing restriction or violating the speed limits, result in error messages with instruction. At any time, the flightcrew can request suggestions on the appropriate set of actions. A similar and successful training program for basic skills for the FMS on the Boeing 737-300 was developed and evaluated. The results strongly support the claim that the training methodology can be adapted to the cockpit.

Instructional Support Software System. Final Report.

ERIC Educational Resources Information Center

McDonnell Douglas Astronautics Co. - East, St. Louis, MO.

This report describes the development of the Instructional Support System (ISS), a large-scale, computer-based training system that supports both computer-assisted instruction and computer-managed instruction. Written in the Ada programming language, the ISS software package is designed to be machine independent. It is also grouped into functional…

Future development of instructional television

NASA Technical Reports Server (NTRS)

Barnett, H. J.; Denzau, A. T.; Dumolin, J. R.; Singh, J. P.

1971-01-01

The use of television in schools as an aid to instruction is proposed for individualized instruction, repetition for slow learners, acceleration for fast learners, and lectures from the best teachers for all students. A dedicated school district cable system, a 40 channel cable to each school and classroom, is considered. This innovation offers an opportunity for improving the quality and content of the school's instruction and for reducing the cost.

Certified Nurses' Aide Job-Related Curriculum.

ERIC Educational Resources Information Center

Massachusetts Career Development Inst., Springfield.

This document, which is designed for students preparing to become a certified nurses' aide, contains instructional text and learning activities organized in nine sections. The following topics are covered: the role of the certified nurse's aide (job duties, personal health, professionalism, code of ethics); infection control (the infection…

Audiovisual Aids for Astronomy and Space Physics at an Urban College

ERIC Educational Resources Information Center

Moche, Dinah L.

1973-01-01

Discusses the use of easily available audiovisual aids to teach a one semester course in astronomy and space physics to liberal arts students of both sexes at Queensborough Community College. Included is a list of teaching aids for use in astronomy instruction. (CC)

The application of brain-based learning principles aided by GeoGebra to improve mathematical representation ability

NASA Astrophysics Data System (ADS)

Priatna, Nanang

2017-08-01

The use of Information and Communication Technology (ICT) in mathematics instruction will help students in building conceptual understanding. One of the software products used in mathematics instruction is GeoGebra. The program enables simple visualization of complex geometric concepts and helps improve students' understanding of geometric concepts. Instruction applying brain-based learning principles is one oriented at the efforts of naturally empowering the brain potentials which enable students to build their own knowledge. One of the goals of mathematics instruction in school is to develop mathematical communication ability. Mathematical representation is regarded as a part of mathematical communication. It is a description, expression, symbolization, or modeling of mathematical ideas/concepts as an attempt of clarifying meanings or seeking for solutions to the problems encountered by students. The research aims to develop a learning model and teaching materials by applying the principles of brain-based learning aided by GeoGebra to improve junior high school students' mathematical representation ability. It adopted a quasi-experimental method with the non-randomized control group pretest-posttest design and the 2x3 factorial model. Based on analysis of the data, it is found that the increase in the mathematical representation ability of students who were treated with mathematics instruction applying the brain-based learning principles aided by GeoGebra was greater than the increase of the students given conventional instruction, both as a whole and based on the categories of students' initial mathematical ability.

Data communications in a parallel active messaging interface of a parallel computer

DOEpatents

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2014-02-11

Data communications in a parallel active messaging interface ('PAMI') or a parallel computer, the parallel computer including a plurality of compute nodes that execute a parallel application, the PAMI composed of data communications endpoints, each endpoint including a specification of data communications parameters for a thread of execution of a compute node, including specification of a client, a context, and a task, the compute nodes and the endpoints coupled for data communications instruction, the instruction characterized by instruction type, the instruction specifying a transmission of transfer data from the origin endpoint to a target endpoint and transmitting, in accordance witht the instruction type, the transfer data from the origin endpoin to the target endpoint.

Computer-Based Instruction: Roots, Origins, Applications, Benefits, Features, Systems, Trends and Issues.

ERIC Educational Resources Information Center

Hofstetter, Fred T.

Dealing exclusively with instructional computing, this paper describes how computers are delivering instruction in a wide variety of subjects to students of all ages and explains why computer-based education is currently having a profound impact on education. After a discussion of roots and origins, computer applications are described for…

Two Instructional Aids to Optimise Processing and Learning from Instructional Explanations

ERIC Educational Resources Information Center

Roelle, Julian; Berthold, Kirsten; Renkl, Alexander

2014-01-01

Although instructional explanations are commonly used to introduce learners to new learning content, previous studies have often shown that their effects on learning outcomes are minimal. This failure might partly be due to mental passivity of the learners while processing introductory explanations and to a lack of opportunity to revise potential…

TEACHER-PRODUCED INSTRUCTIONAL FILMS IN CHEMISTRY, 8MM AND SUPER 8.

ERIC Educational Resources Information Center

O'CONNOR, ROD; SLABAUGH, WENDELL

TECHNIQUES FOR PRODUCING 8MM INSTRUCTIONAL FILMS IN CHEMISTRY ARE PRESENTED. IN PART I A PHILOSOPHY OF TEACHER-PRODUCED FILMS IS DEVELOPED, EMPHASIZING THE VALUE OF THE LOCAL SETTING, AND CUSTOM-MADE CONTENTS. APPLICATIONS SUGGESTED ARE (1) TECHNIQUE INSTRUCTION, (2) FILMED EXPERIMENTS, (3) INSTRUMENT FAMILIARIZATION, (4) LECTURE AIDS, AND (5)…

The Influence of Instructions, Outlines, and Illustrations on the Comprehension and Recall of Scientific Texts.

ERIC Educational Resources Information Center

Balluerka, Nekane

1995-01-01

Effects of 3 different instructional aids on the acquisition of information from a scientific passage were studied with 104 Spanish undergraduates. Written instructions, preparing a written outline, and seeing an illustration all led to higher performance. The outline condition led to the highest performance for questions requiring information…

Instructional Technology and Reading: Progress, Problems, and Promise.

ERIC Educational Resources Information Center

Smith, Nila Banton

As the invention of the wheel played a large role in the technological advancement of transportation, so many new teaching devices have played an important role in the technological advancement of reading instruction. Though the spread of technology was initially slow, it now offers many instructional aids (e.g., tapes, records, television,…

Pentagon. Civil Defense and Fire Instructions. Part 2: Shelter Management.

ERIC Educational Resources Information Center

Office of the Army Headquarters Commandant, Washington, DC.

This instructional guide to civil defense shelter management is given as an aid to shelter survival techniques rather than to shelter comfort. The basis, purposes, and organization of shelter administration are outlined, with instructions on--(1) shelter management, (2) shelter teams and functions, (3) supplies and locations, and (4) daily shelter…

YouTube: Educational Potentials and Pitfalls

ERIC Educational Resources Information Center

Jones, Troy; Cuthrell, Kristen

2011-01-01

The instructional potential of video technology in the classroom is promising, especially in light of the 21st Century Learning Framework (Siegle, 2009). Studies show positive gains in student outcomes as a result of the integration of video technology in instruction. This article explores potential uses of YouTube as an instructional aid in…

Motor Transportation Technology: Automechanics. Tune-Up. Block VIII. A-VIII.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

Instructional materials on tune-ups are provided for an auto mechanics course in the motor transportation technology program. Instructor's plans are provided for three units. Each unit consists of instructional and manipulative lessons. The format of an instructional lesson is as follows: the subject, aim, a listing of teaching aids and materials,…

Computer-Assisted Instruction in Statistics. Technical Report.

ERIC Educational Resources Information Center

Cooley, William W.

A paper given at a conference on statistical computation discussed teaching statistics with computers. It concluded that computer-assisted instruction is most appropriately employed in the numerical demonstration of statistical concepts, and for statistical laboratory instruction. The student thus learns simultaneously about the use of computers…

Factors Influencing Junior High School Teachers' Computer-Based Instructional Practices Regarding Their Instructional Evolution Stages

ERIC Educational Resources Information Center

Hsu, Ying-Shao; Wu, Hsin-Kai; Hwang, Fu-Kwun

2007-01-01

Sandholtz, Ringstaff, & Dwyer (1996) list five stages in the "evolution" of a teacher's capacity for computer-based instruction--entry, adoption, adaptation, appropriation and invention--which hereafter will be called the teacher's computer-based instructional evolution. In this study of approximately six hundred junior high school…

Adapting Instruction to Individual Learner Differences: A Research Paradigm for Computer-Based Instruction.

ERIC Educational Resources Information Center

Mills, Steven C.; Ragan, Tillman J.

This paper examines a research paradigm that is particularly suited to experimentation-related computer-based instruction and integrated learning systems. The main assumption of the model is that one of the most powerful capabilities of computer-based instruction, and specifically of integrated learning systems, is the capacity to adapt…

46 CFR 131.530 - Abandon-ship training and drills.

Code of Federal Regulations, 2010 CFR

2010-10-01

... volumes, or audiovisual training aids, or both. (1) The material must contain instructions and information.... If audiovisual aids are used, they must be incorporated in the training sessions aboard under...

Intrusive and Non-Intrusive Instruction in Dynamic Skill Training.

DTIC Science & Technology

1981-10-01

less sensitive to the processing load imposed by the dynaic task together with instructional feedback processing than were the decison - making and...betwee computer based instruction of knowledge systems and computer based instruction of dynamic skills. There is reason to expect that the findings of...knowledge 3Ytm and computer based instruction of dynlamic skill.. There is reason to expect that the findings of research on knowledge system

Roofing: Workbook and Tests. First-Aid Training.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Bureau of Publications.

This workbook on first aid is one of a series of nine individual units of instruction for roofing apprenticeship classes in California. The workbook covers 12 topics: introduction to first-aid practices; burns; skeletal injuries; spinal injuries; wounds, bleeding, and bruises; emergencies of the heart and blood circulation system; breathing and…

Supervisory Control of Remote Manipulators, Vehicles and Dynamic Processes: Experiments in Command and Display Aiding

DTIC Science & Technology

1983-03-01

aiding the operator in detecting ocating failures. tN-A brief conclusion reviews how these experiments fit together and speculates on problems and...and issues high level comiands to the TIS (subgcal statements, instructions on how to reach each subgoal or what to do otherwise, andI changes in...parameters). The TIS, insofar as it has subgoals to reach, instructions on how to try or what to do if it is impeded, functions as an aatomaton. it uses

Science Learning Centers--An Aid to Instruction.

ERIC Educational Resources Information Center

Orlich, Donald C.; And Others

1982-01-01

Rationale for and examples of science learning centers are provided. "Life Beneath the Sea,""Humans in Space,""World of Insects" and "Experimentation" centers are described. Instructions for constructing centers from readily available materials are included. (JN)

Planning Guide for Instructional Computing.

ERIC Educational Resources Information Center

League for Innovation in the Community Coll., Laguna Hills, CA.

Designed to assist academic administrators at community colleges in developing strategies for the application of computers to teaching and learning, this guide provides background information and recommendations for the design and implementation of an instructional computing plan. Chapter 1 examines computers as a topic of instruction, as a medium…

Medical education as a science: the quality of evidence for computer-assisted instruction.

PubMed

Letterie, Gerard S

2003-03-01

A marked increase in the number of computer programs for computer-assisted instruction in the medical sciences has occurred over the past 10 years. The quality of both the programs and the literature that describe these programs has varied considerably. The purposes of this study were to evaluate the published literature that described computer-assisted instruction in medical education and to assess the quality of evidence for its implementation, with particular emphasis on obstetrics and gynecology. Reports published between 1988 and 2000 on computer-assisted instruction in medical education were identified through a search of MEDLINE and Educational Resource Identification Center and a review of the bibliographies of the articles that were identified. Studies were selected if they included a description of computer-assisted instruction in medical education, regardless of the type of computer program. Data were extracted with a content analysis of 210 reports. The reports were categorized according to study design (comparative, prospective, descriptive, review, or editorial), type of computer-assisted instruction, medical specialty, and measures of effectiveness. Computer-assisted instruction programs included online technologies, CD-ROMs, video laser disks, multimedia work stations, virtual reality, and simulation testing. Studies were identified in all medical specialties, with a preponderance in internal medicine, general surgery, radiology, obstetrics and gynecology, pediatrics, and pathology. Ninety-six percent of the articles described a favorable impact of computer-assisted instruction in medical education, regardless of the quality of the evidence. Of the 210 reports that were identified, 60% were noncomparative, descriptive reports of new techniques in computer-assisted instruction, and 15% and 14% were reviews and editorials, respectively, of existing technology. Eleven percent of studies were comparative and included some form of assessment of the effectiveness of the computer program. These assessments included pre- and posttesting and questionnaires to score program quality, perceptions of the medical students and/or residents regarding the program, and impact on learning. In one half of these comparative studies, computer-assisted instruction was compared with traditional modes of teaching, such as text and lectures. Six studies compared performance before and after the computer-assisted instruction. Improvements were shown in 5 of the studies. In the remainder of the studies, computer-assisted instruction appeared to result in similar test performance. Despite study design or outcome, most articles described enthusiastic endorsement of the programs by the participants, including medical students, residents, and practicing physicians. Only 1 study included cost analysis. Thirteen of the articles were in obstetrics and gynecology. Computer-assisted instruction has assumed to have an increasing role in medical education. In spite of enthusiastic endorsement and continued improvements in software, few studies of good design clearly demonstrate improvement in medical education over traditional modalities. There are no comparative studies in obstetrics and gynecology that demonstrate a clear-cut advantage. Future studies of computer-assisted instruction that include comparisons and cost assessments to gauge their effectiveness over traditional methods may better define their precise role.

AEDS Proceedings: The Tomorrow in New Technology; Frontiers in Administrative Computing; Adventures in Instructional Computing.

ERIC Educational Resources Information Center

Association for Educational Data Systems, Washington, DC.

The 122 papers in this collection were presented in 15 sessions of the 20th annual convention of the Association for Educational Data Systems which was held in Orlando, Florida, May 10-14, 1982. Individual papers covered a wide variety of topics, including computer assisted instruction, computer managed instruction, computer literacy,…

The Future Medical Science and Colorectal Surgeons

PubMed Central

2017-01-01

Future medical technology breakthroughs will build from the incredible progress made in computers, biotechnology, and nanotechnology and from the information learned from the human genome. With such technology and information, computer-aided diagnoses, organ replacement, gene therapy, personalized drugs, and even age reversal will become possible. True 3-dimensional system technology will enable surgeons to envision key clinical features and will help them in planning complex surgery. Surgeons will enter surgical instructions in a virtual space from a remote medical center, order a medical robot to perform the operation, and review the operation in real time on a monitor. Surgeons will be better than artificial intelligence or automated robots when surgeons (or we) love patients and ask questions for a better future. The purpose of this paper is looking at the future medical science and the changes of colorectal surgeons. PMID:29354602

The Future Medical Science and Colorectal Surgeons.

PubMed

Kim, Young Jin

2017-12-01

Future medical technology breakthroughs will build from the incredible progress made in computers, biotechnology, and nanotechnology and from the information learned from the human genome. With such technology and information, computer-aided diagnoses, organ replacement, gene therapy, personalized drugs, and even age reversal will become possible. True 3-dimensional system technology will enable surgeons to envision key clinical features and will help them in planning complex surgery. Surgeons will enter surgical instructions in a virtual space from a remote medical center, order a medical robot to perform the operation, and review the operation in real time on a monitor. Surgeons will be better than artificial intelligence or automated robots when surgeons (or we) love patients and ask questions for a better future. The purpose of this paper is looking at the future medical science and the changes of colorectal surgeons.

Microprogramming Handbook. Second Edition.

ERIC Educational Resources Information Center

Microdata Corp., Santa Ana, CA.

Instead of instructions residing in the main memory as in a fixed instruction computer, a micro-programable computer has a separete read-only memory which is alterable so that the system can be efficiently adapted to the application at hand. Microprogramable computers are faster than fixed instruction computers for several reasons: instruction…

[Computer Assisted Instruction.

ERIC Educational Resources Information Center

Broderick, Bill; And Others

1987-01-01

These two serial issues are devoted to the impact of computers on education, and specifically their effects on developmental education programs. First "The Effects of Computer-Based Instruction" summarizes the literature on the impact of computer-based instruction, including a study by James and Chen-Lin Kulik and Peter Cohen, which found that:…

Factors Influencing Exemplary Science Teachers' Levels of Computer Use

ERIC Educational Resources Information Center

Hakverdi, Meral; Dana, Thomas M.; Swain, Colleen

2011-01-01

The purpose of this study was to examine exemplary science teachers' use of technology in science instruction, factors influencing their level of computer use, their level of knowledge/skills in using specific computer applications for science instruction, their use of computer-related applications/tools during their instruction, and their…

Instructional Computer Use in the Community College: A Discussion of the Research and Its Implications.

ERIC Educational Resources Information Center

Bower, Beverly L.

1998-01-01

Reviews research on the instructional benefits of computer technology. Discusses the computer readiness of students, faculty, and institutions, and suggests that despite mixed findings, political and organizational realities indicate computer-based instruction is a feasible alternative for community colleges. Therefore, educators should continue…

Math Attitudes of Computer Education and Instructional Technology Students

ERIC Educational Resources Information Center

Tekerek, Mehmet; Yeniterzi, Betul; Ercan, Orhan

2011-01-01

Computer Education and Instructional Technology (CEIT) Departments train computer teachers to fill gap of computer instructor in all grades of schools in Turkey. Additionally graduates can also work as instructional technologist or software developer. The curriculum of CEIT departments includes mathematics courses. The aim of this study is to…

Instructional Computing in the Community Colleges of Washington State.

ERIC Educational Resources Information Center

Howard, Alan; And Others

A description of current activities in instructional computing in Washington State community colleges is presented, along with curriculum content guidelines and planning procedures to assist colleges which plan to initiate or upgrade their activities in instructional computing. The document provides an overview of computing activities in the…

Computation of Low Speed Cavity Noise

NASA Technical Reports Server (NTRS)

Blech, Richard A. (Technical Monitor); Loh, Ching Y.

2004-01-01

Over the last five years, the Aircraft Icing Project of the NASA Aviation Safety Program has developed a number of in-flight icing education and training aids to support increased awareness for pilots of the hazards associated with atmospheric icing conditions. Through the development of this work, a number of new instructional design approaches and media delivery methods have been introduced to enhance the learning experience, expand user interactivity and participation, and, hopefully, increase the learner retention rates. The goal of using these multimedia techniques is to increase the effectiveness of the training materials. This paper will describe the multimedia technology that has been introduced and give examples of how it was used.

SBOL Visual: A Graphical Language for Genetic Designs

DOE PAGES

Quinn, Jacqueline Y.; Cox, Robert Sidney; Adler, Aaron; ...

2015-12-03

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. We report that it consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual.

SBOL Visual: A Graphical Language for Genetic Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quinn, Jacqueline Y.; Cox, Robert Sidney; Adler, Aaron

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. We report that it consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual.

SBOL Visual: A Graphical Language for Genetic Designs

PubMed Central

Adler, Aaron; Beal, Jacob; Bhatia, Swapnil; Cai, Yizhi; Chen, Joanna; Clancy, Kevin; Galdzicki, Michal; Hillson, Nathan J.; Le Novère, Nicolas; Maheshwari, Akshay J.; McLaughlin, James Alastair; Myers, Chris J.; P, Umesh; Pocock, Matthew; Rodriguez, Cesar; Soldatova, Larisa; Stan, Guy-Bart V.; Swainston, Neil; Wipat, Anil; Sauro, Herbert M.

2015-01-01

Synthetic Biology Open Language (SBOL) Visual is a graphical standard for genetic engineering. It consists of symbols representing DNA subsequences, including regulatory elements and DNA assembly features. These symbols can be used to draw illustrations for communication and instruction, and as image assets for computer-aided design. SBOL Visual is a community standard, freely available for personal, academic, and commercial use (Creative Commons CC0 license). We provide prototypical symbol images that have been used in scientific publications and software tools. We encourage users to use and modify them freely, and to join the SBOL Visual community: http://www.sbolstandard.org/visual. PMID:26633141

Technologies as Rural Special Education Problem Solvers--A Status Report and Successful Strategies.

ERIC Educational Resources Information Center

Helge, Doris

Rural schools can help solve their special education problems by using advanced technology to provide instructional support (computer managed instruction, satellite television, library searches, resource networks, on-line testing), instructional applications (computer assisted instruction, reading machines, mobile vans, instructional television),…

Adult student satisfaction in an accelerated RN-to-BSN program: a follow-up study.

PubMed

Boylston, Mary T; Jackson, Christina

2008-01-01

This mixed-method study revealed accelerated RN-to-BSN (bachelor of science in nursing) students' levels of satisfaction with a wide range of college services in a small university. Building on seminal research on the topic [Boylston, M. T., Peters, M. A., & Lacey, M. (2004). Adult student satisfaction in traditional and accelerated RN-to-BSN programs. Journal of Professional Nursing, 20, 23-32.], the Noel-Levitz Adult Student Priorities Survey (ASPS) and qualitative interview data revealed primary factors involved in nontraditional (adult) accelerated RN-to-BSN student satisfaction. The ASPS assesses both satisfaction with and importance of the following factors: academic advising effectiveness, academic services, admissions and financial aid effectiveness, campus climate, instructional effectiveness, registration effectiveness, safety and security, and service excellence. Of these factors, participants considered instructional effectiveness and academic advising effectiveness as most important and concomitantly gave high satisfaction ratings to each. In contrast, convenience of the bookstore, counseling services, vending machines, and computer laboratories were given low importance ratings. The participants cited convenience as a strong marketing factor. Loss of financial aid or family crisis was given as a reason for withdrawal and, for most students, would be the only reason for not completing the BSN program. Outcomes of this investigation may guide faculty, staff, and administrators in proactively creating an educational environment in which a nontraditional student can succeed.

Individualized Instruction in the Social Studies Through Learning Centers and Contracts. How To Do It Series, Series 2, No. 11.

ERIC Educational Resources Information Center

Davis, Anita Price

The paper presents a rationale for individualizing instruction in social studies in elementary and secondary schools and offers suggestions to aid classroom teachers as they develop two individualized instruction techniques. These recommended approaches are learning centers (areas of classrooms set aside for special learning, review, and…

EVALUATION OF THE EOA REMEDIAL INSTRUCTION PROJECT FOR HIGH SCHOOL DROPOUTS--1966-67. RESEARCH REPORT.

ERIC Educational Resources Information Center

HAKKARAINEN, EDWARD A.

A REMEDIAL READING INSTRUCTION PROJECT TO IMPROVE THE SKILLS OF HIGH SCHOOL DROPOUTS IS EVALUATED. CENTERS WERE ESTABLISHED AT THREE SITES TO SERVE 750 DROPOUTS REFERRED BY VARIOUS COMMUNITY AGENCIES. THE PROJECT WAS STAFFED BY SIX REMEDIAL READING TEACHERS, SEVEN COMMUNITY AIDES, AND ONE LIAISON WORKER. INDIVIDUALIZED INSTRUCTION USING A VARIETY…

The Laboratory. Guides for the Improvement of Instruction in Higher Education, No. 9.

ERIC Educational Resources Information Center

Alexander, Lawrence T.; And Others

This guide for the improvement of instruction in higher education is designed to aid the educator in planning and conducting laboratory instruction. The examples used refer primarily to science laboratories. Topics discussed include: deciding whether or not to use the laboratory method (with a discussion of discovery learning or the processes of…

Effectiveness of Schema-Based Instruction for Improving Seventh-Grade Students' Proportional Reasoning: A Randomized Experiment

ERIC Educational Resources Information Center

Jitendra, Asha K.; Star, Jon R.; Dupuis, Danielle N.; Rodriguez, Michael C.

2013-01-01

This study examined the effect of schema-based instruction (SBI) on 7th-grade students' mathematical problem-solving performance. SBI is an instructional intervention that emphasizes the role of mathematical structure in word problems and also provides students with a heuristic to self-monitor and aid problem solving. Using a…

Technology-Aided Interventions and Instruction for Adolescents with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Odom, Samuel L.; Thompson, Julie L.; Hedges, Susan; Boyd, Brian A.; Dykstra, Jessica R.; Duda, Michelle A.; Szidon, Kathrine L.; Smith, Leann E.; Bord, Aimee

2015-01-01

The use of technology in intervention and instruction for adolescents with autism spectrum disorder (ASD) is increasing at a striking rate. The purpose of this paper is to examine the research literature underlying the use of technology in interventions and instruction for high school students with ASD. In this paper, authors propose a theoretical…

A Case Study of Chinese University English as a Foreign Language (EFL) Students' Attitudes toward Learning Technologies

ERIC Educational Resources Information Center

Hayes, Kenneth Michael

2010-01-01

This qualitative case study investigates Chinese university English in the context of foreign language (EFL) learners' attitudes about video-aided instruction (VAI), video recording instruction, and mobile phone instruction (learning technologies). When I was working as an English teacher in Mainland China, several instructors and students stated…

An Analysis of the Federal Role in Instructional Technology in the Era of the New Federalism.

ERIC Educational Resources Information Center

Scandura, Joseph M.

This analysis of how the federal government might best promote excellence in education via instructional technology identifies strengths and weaknesses of instructional technology during the 1980's, indicates how technology might aid the teaching and learning process, and suggests how the federal goverment might best assist states and localities…

Effectiveness of Student-Generated Video as a Teaching Tool for an Instrumental Technique in the Organic Chemistry Laboratory

ERIC Educational Resources Information Center

Jordan, Jeremy T.; Box, Melinda C.; Eguren, Kristen E.; Parker, Thomas A.; Saraldi-Gallardo, Victoria M.; Wolfe, Michael I.; Gallardo-Williams, Maria T.

2016-01-01

Multimedia instruction has been shown to serve as an effective learning aid for chemistry students. In this study, the viability of student-generated video instruction for organic chemistry laboratory techniques and procedure was examined and its effectiveness compared to instruction provided by a teaching assistant (TA) was evaluated. After…

The Role of Student Financial Aid in Expanding Opportunities for Higher Education in Ohio. Report of the Financial Aid Study Committee.

ERIC Educational Resources Information Center

Ohio Board of Regents, Columbus.

The Financial Aid Study Committee of the Ohio Board of Regents was impaneled in October 1987 to determine if the state's major financial aid investments, principally the Ohio Instructional Grant Program, are an adequate resource in addressing state access objectives. Significant changes in the Ohio economic base have given rise to renewed emphasis…

The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

ERIC Educational Resources Information Center

Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

2016-01-01

This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

Artificial Intelligence Methods in Computer-Based Instructional Design. The Minnesota Adaptive Instructional System.

ERIC Educational Resources Information Center

Tennyson, Robert

1984-01-01

Reviews educational applications of artificial intelligence and presents empirically-based design variables for developing a computer-based instruction management system. Taken from a programmatic research effort based on the Minnesota Adaptive Instructional System, variables include amount and sequence of instruction, display time, advisement,…

Computer-Supported Instruction in Enhancing the Performance of Dyscalculics

ERIC Educational Resources Information Center

Kumar, S. Praveen; Raja, B. William Dharma

2010-01-01

The use of instructional media is an essential component of teaching-learning process which contributes to the efficiency as well as effectiveness of the teaching-learning process. Computer-supported instruction has a very important role to play as an advanced technological instruction as it employs different instructional techniques like…

Exemplary Social Studies Teachers Use of Computer-Supported Instruction in the Classroom

ERIC Educational Resources Information Center

Acikalin, Mehmet

2010-01-01

Educators increasingly support the use of computer-supported instruction in social studies education. However few studies have been conducted to study teacher use of computer-supported instruction in social studies education. This study was therefore designed to examine the use of exemplary social studies teachers' computer-supported instruction…

New Hampshire HIV/AIDS Resource-Based Learning Curriculum Project.

ERIC Educational Resources Information Center

Snider, Susan C., Ed.

The age appropriate units of AIDS/HIV instruction in this guide are based on the student outcomes listed in the "New Hampshire Educators HIV/AIDS Handbook: Curriculum and Policy Guide." All of the units, organized by grade levels, were written collaboratively by teams of New Hampshire educators, each team consisting of a library media…

JOB PERFORMANCE AIDS AND THEIR IMPACT ON MANPOWER UTILIZATION.

ERIC Educational Resources Information Center

CHALUPSKY, ALBERT B.; KOPF, THOMAS J.

THE PURPOSE OF THE STUDY WAS TO REVIEW AND SYNTHESIZE THE RESULTS OF RESEARCH ON JOB PERFORMANCE AIDS AND EXPLORE THEIR CURRENT AND POTENTIAL ON INDUSTRIAL MANPOWER UTILIZATION. JOB PERFORMANCE AIDS ARE AUXILIARY INFORMATION STORAGE DEVICES WHICH PRESENT JOB INSTRUCTIONS OR REFERENCE DATA FOR USE BY THE EMPLOYEE DURING THE COURSE OF HIS JOB…

State of Maine Student Financial Aid Guide to Post-Secondary Education. 1979-1980.

ERIC Educational Resources Information Center

Maine State Post-Secondary Education Commission, Augusta.

Financial aid information for residents of the State of Maine is presented in this booklet. Instructions for completing the College Scholarship Service Financial Aid Form are presented. The Basic Educational Opportunity Grants Program, the Supplemental Educational Opportunity Grant Program, Maine State Incentive Scholarship Program, and the New…

Lessons on Stigma: Teaching about HIV/AIDS

ERIC Educational Resources Information Center

Lichtenstein, Bronwen; DeCoster, Jamie

2014-01-01

Teaching about the sociology of HIV/AIDS involves teaching about the causes and effects of stigma. We describe a Sociology of HIV/AIDS course at the University of Alabama in which stigma reduction was assessed as a primary objective. The syllabus involved theory-based instruction, class visits, service learning, and student research on community…

An Unforgiving Enemy: AIDS. Student Reader and Teacher's Guide.

ERIC Educational Resources Information Center

Adult Education Services, Johnstown, PA.

These adult basic education instructional materials on the prevention of Acquired Immune Deficiency Syndrome (AIDS) include a student reader and a teacher's guide. The student reader contains six chapters. Chapter 1 introduces two characters--Ricco and Francis--and focuses on the definition of AIDS, the three stages of the disease, the cause, and…

Standard First Aid Training Course. Naval Education and Training Command Rate Training Manual.

ERIC Educational Resources Information Center

Naval Education and Training Command, Washington, DC.

This first aid manual is designed to serve as basic first aid instructional materials for all nonmedical naval personnel. Chapters are included on the following topics: basic life support, hemorrhage, shock, wounds, injuries, drug abuse, poisoning, common medical emergencies, NBC (nuclear, biological, chemical) agent casualties, and rescue and…

Design, development, and evaluation of visual aids for communicating prescription drug instructions to nonliterate patients in rural Cameroon.

PubMed

Ngoh, L N; Shepherd, M D

1997-03-01

In this study, culturally sensitive visual aids designed to help convey drug information to nonliterate female adults who had a prescription for a solid oral dosage form of antibiotic medications were developed and evaluated. The researchers conceptualized the educational messages while a local artist produced the visual aids. Seventy-eight female ambulatory patients were evaluated for comprehension and compliance with antibiotic prescription instructions. The study was conducted in three health centers in Cameroon, West Africa and followed a pre-test, post-test, and follow-up format for three groups: two experimental, and one control. All participants were randomly assigned to either experimental or control groups, 26 patients to each group. Subjects in the experimental groups received visual aids alone or visual aids plus an Advanced Organizer. A comparison of the three groups showed that subjects in the experimental groups scored significantly higher than the control group in both the comprehension and compliance measures.

Research on Student Thought Processes during Computer-Based Instruction.

ERIC Educational Resources Information Center

Clark, Richard E.

1984-01-01

Reviews cognitive research related to computer-based instruction in the areas of motivation; the relationship between computer-assisted instruction and learning; learner control; transfer of learning; hemispheric dominance; and anxiety. Design professionals are urged to consider congitive views. (MBR)

The Effects of Hearing Aid Directional Microphone and Noise Reduction Processing on Listening Effort in Older Adults with Hearing Loss.

PubMed

Desjardins, Jamie L

2016-01-01

Older listeners with hearing loss may exert more cognitive resources to maintain a level of listening performance similar to that of younger listeners with normal hearing. Unfortunately, this increase in cognitive load, which is often conceptualized as increased listening effort, may come at the cost of cognitive processing resources that might otherwise be available for other tasks. The purpose of this study was to evaluate the independent and combined effects of a hearing aid directional microphone and a noise reduction (NR) algorithm on reducing the listening effort older listeners with hearing loss expend on a speech-in-noise task. Participants were fitted with study worn commercially available behind-the-ear hearing aids. Listening effort on a sentence recognition in noise task was measured using an objective auditory-visual dual-task paradigm. The primary task required participants to repeat sentences presented in quiet and in a four-talker babble. The secondary task was a digital visual pursuit rotor-tracking test, for which participants were instructed to use a computer mouse to track a moving target around an ellipse that was displayed on a computer screen. Each of the two tasks was presented separately and concurrently at a fixed overall speech recognition performance level of 50% correct with and without the directional microphone and/or the NR algorithm activated in the hearing aids. In addition, participants reported how effortful it was to listen to the sentences in quiet and in background noise in the different hearing aid listening conditions. Fifteen older listeners with mild sloping to severe sensorineural hearing loss participated in this study. Listening effort in background noise was significantly reduced with the directional microphones activated in the hearing aids. However, there was no significant change in listening effort with the hearing aid NR algorithm compared to no noise processing. Correlation analysis between objective and self-reported ratings of listening effort showed no significant relation. Directional microphone processing effectively reduced the cognitive load of listening to speech in background noise. This is significant because it is likely that listeners with hearing impairment will frequently encounter noisy speech in their everyday communications. American Academy of Audiology.

A Course of Study in English for Grade Eight.

ERIC Educational Resources Information Center

Rochester Public Schools, Minn.

As an aid for teachers in instruction planning, a detailed English course of study is presented. Course goals and philosophies for each of three sections: Composition; Language; Literature are given. Each section includes: Aims, Instructional Materials, Suggestions. (NF)

A Course of Study in English for Grade Ten.

ERIC Educational Resources Information Center

Rochester Public Schools, Minn.

As an aid for teachers in instruction planning, a detailed English course of study is presented. Philosophies for each of three parts: Composition; Language; Literature are given. Each of these sections includes: Aims, Instructional Materials, Suggestions. (NF)

A Course of Study in English for Grade Seven.

ERIC Educational Resources Information Center

Rochester Public Schools, Minn.

As an aid for teachers in instruction planning, a detailed English course of study is presented. Course goals and philosophies for each of three sections: Composition; Language; Literature are given. Each section includes: Aims, Instructional Materials, Suggestions. (NF)

A Course of Study in English for Grade Nine.

ERIC Educational Resources Information Center

Rochester Public Schools, Minn.

As an aid for teachers in instruction planning, a detailed English course of study is presented. Course goals and philosophies for each of three sections: Composition; Language; Literature are given. Each section includes: Aims, Instructional Materials, Suggestions. (NF)

Usability and Navigability of an HIV/AIDS Internet Intervention for Adolescents in a Resource Limited Setting

PubMed Central

Ybarra, Michele; Biringi, Ruth; Prescott, Tonya; Bull, Sheana S.

2012-01-01

Use of Internet is growing in Sub Saharan Africa. Evidence of computer and Internet effectiveness for reduction in risk behaviors associated with HIV shown in U.S. settings has yet to be replicated in Africa. We describe the development, usability and navigability testing of an Internet-based HIV prevention program for secondary school students in Uganda, called CyberSenga. For this work, we used four data collection activities, including observation of (a) computer skills and (b) navigation, (c) focus group discussions, and (d) field assessments to document comprehension and usability of program content. We document limited skills among students, but youth with basic computers skills were able to navigate the program after instruction. Youth were most interested in activities with more interaction. Field-testing illustrated the importance of using a stand-alone electrical source during program delivery. This work suggests delivery of Internet-based health promotion content in Africa requires attention to user preparedness and literacy, bandwidth, Internet connection, and electricity. PMID:22918136

The Cost-Effectiveness of Military Training.

ERIC Educational Resources Information Center

Orlansky, Jesse

Flight simulators, computer-based instruction (including both computer-assisted and computer-managed instruction), and maintenance training simulators are as effective, when used for training, as aircraft, conventional classroom instruction, and actual equipment, respectively. Data from about 100 studies are reported to support this finding. These…

Computer Guided Instructional Design.

ERIC Educational Resources Information Center

Merrill, M. David; Wood, Larry E.

1984-01-01

Describes preliminary efforts to create the Lesson Design System, a computer-guided instructional design system written in Pascal for Apple microcomputers. Its content outline, strategy, display, and online lesson editors correspond roughly to instructional design phases of content and strategy analysis, display creation, and computer programing…

Use of notebook computers for third-year surgical students.

PubMed

Prystowsky, J B; Hassan, M B; Nahrwold, D L

1996-08-01

Computer-aided instruction has become increasingly popular in medical education. Notebook computers (NCs) are attractive, convenient microcomputers. We hypothesized that use of NCs by third-year surgical students would enhance their performance of educational activities. During the 1994-1995 academic year 25 student volunteers used NCs during the surgery clerkship. NC software included questions for self-examination, anatomy self-instruction program, word processing and electronic mail (e-mail) for recording and sending history and physicals (H & Ps) to faculty for review, and MEDLINE search software. Identical software was available to all students at on-campus computer centers. All students were asked to record the number of hours that they used the self-examination and anatomy programs, number of H & Ps performed and reviewed by faculty, and number of literature searches performed. NC users were interviewed regarding the value of NC use and their rating of software programs. NC users (n = 25) used the self-examination and anatomy programs more often, performed more literature searches, and had a greater percentage of their H & Ps reviewed by faculty compared with non-NC users (n = 143) (p < 0.05 for all outcomes). Most NC users agreed that NC use was enjoyable and valuable, and they believed that all students should have NCs during the surgery clerkship. Students rated software in order of preference: e-mail > self-examination > MEDLINE search > anatomy program. NC use enhanced performance of educational activities in the surgery clerkship. Effort toward developing educational software for surgical students is warranted because students are likely to use such programs.

Motivational Screen Design Guidelines for Effective Computer-Mediated Instruction.

ERIC Educational Resources Information Center

Lee, Sung Heum; Boling, Elizabeth

Screen designers for computer-mediated instruction (CMI) products must consider the motivational appeal of their designs. Although learners may be motivated to use CMI programs initially because of their novelty, this effect wears off and the instruction must stand on its own. Instructional screens must provide effective and efficient instruction,…

Instructing Educators in the Use of Assistive Technology Listening Devices in the Classroom

ERIC Educational Resources Information Center

Alodail, Abdullah K.

2014-01-01

The present study will present Kemp's design in the classroom setting for students with hearing impairments. Based on his model, the researcher will design various instructional methods of how to teach students with hearing aids in the school, focusing on the instruction of English to America K-12 students. The study will also include a list of…

College of Education Graduate School Students Examine the Advantages of Integrating Research-Based Instructional Theories into Every Day Classroom Instruction

ERIC Educational Resources Information Center

Costley, Kevin C.; Tyler, Brenda L.

2014-01-01

College of Education students are always interested in the purpose and use of educational theories and what theories can be used to aid in classroom instruction and learning. This article contains written dialogues from of university educational graduate students elaborating on their personal perceptions of the usefulness of theories in public…

An Introduction to the Consumer's Society. An Instruction Manual with Resources for Teaching Limited-English Speaking Students. Consumer Education, Nutrition, Parenting.

ERIC Educational Resources Information Center

Antonelli, Sharon

These three instruction manuals are designed as aids for faculty and staff teaching consumer education, nutrition, and parenting. They include resources for teaching limited English speaking students. A 17-page Vocational English as a Second Language (VESL) annotated bibliography precedes the instruction manuals. Each manual consists of 18 units.…

WeSaySo Case Study: Designing and Implementing a Case Study for Use in an Instructional Design Class.

ERIC Educational Resources Information Center

Graves, Rick; Barnett, Mardee; Gamble, Yolanda; Kolak, Mike

A case study was used in an instructional design class to facilitate the transfer of conceptual knowledge to concrete concerns and to aid instructional technology graduate students' understanding of the steps involved in designing, analyzing, and implementing an effective needs analysis. The case study involved real events at fictitious company…

The efficacy of video feedback for learning the golf swing.

PubMed

Guadagnoli, M; Holcomb, W; Davis, M

2002-08-01

This study was designed to examine the efficacy of video instruction relative to that of verbal and self-guided instruction. Before training, 30 golfers were assigned at random to one of three groups: video, verbal or self-guided instruction. Video instruction was defined as a practice session in which the teacher was aided by the use of video. Verbal instruction was defined as practising with the teacher providing verbal feedback. Self-guided practice was defined as practising without the aid of a teacher. The participants had a pre-test, four 90 min practice sessions, an immediate post-test and a 2 week delayed post-test. During the pre-test and post-tests, all participants were required to strike 15 golf balls, with a 7-iron, from an artificial turf mat for distance and accuracy. The results showed that all groups were equal on the pre-test. On the first post-test, the two instruction groups performed worse than the self-guided group. However, on the second post-test, the two instruction groups performed better than the self-guided group, with the video group performing best. We interpret these results to mean that video analysis is an effective means of practice, but that the positive effects may take some time to develop.

A Plan for Community College Instructional Computing.

ERIC Educational Resources Information Center

Howard, Alan; And Others

This document presents a comprehensive plan for future growth in instructional computing in the Washington community colleges. Two chapters define the curriculum objectives and content recommended for instructional courses in the community colleges which require access to computing facilities. The courses described include data processing…

Data communications in a parallel active messaging interface of a parallel computer

DOEpatents

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2013-10-29

Data communications in a parallel active messaging interface (`PAMI`) of a parallel computer, the parallel computer including a plurality of compute nodes that execute a parallel application, the PAMI composed of data communications endpoints, each endpoint including a specification of data communications parameters for a thread of execution on a compute node, including specifications of a client, a context, and a task, the compute nodes and the endpoints coupled for data communications through the PAMI and through data communications resources, including receiving in an origin endpoint of the PAMI a data communications instruction, the instruction characterized by an instruction type, the instruction specifying a transmission of transfer data from the origin endpoint to a target endpoint and transmitting, in accordance with the instruction type, the transfer data from the origin endpoint to the target endpoint.

Computer-assisted versus conventional free fibula flap technique for craniofacial reconstruction: an outcomes comparison.

PubMed

Seruya, Mitchel; Fisher, Mark; Rodriguez, Eduardo D

2013-11-01

There has been rising interest in computer-aided design/computer-aided manufacturing for preoperative planning and execution of osseous free flap reconstruction. The purpose of this study was to compare outcomes between computer-assisted and conventional fibula free flap techniques for craniofacial reconstruction. A two-center, retrospective review was carried out on patients who underwent fibula free flap surgery for craniofacial reconstruction from 2003 to 2012. Patients were categorized by the type of reconstructive technique: conventional (between 2003 and 2009) or computer-aided design/computer-aided manufacturing (from 2010 to 2012). Demographics, surgical factors, and perioperative and long-term outcomes were compared. A total of 68 patients underwent microsurgical craniofacial reconstruction: 58 conventional and 10 computer-aided design and manufacturing fibula free flaps. By demographics, patients undergoing the computer-aided design/computer-aided manufacturing method were significantly older and had a higher rate of radiotherapy exposure compared with conventional patients. Intraoperatively, the median number of osteotomies was significantly higher (2.0 versus 1.0, p=0.002) and the median ischemia time was significantly shorter (120 minutes versus 170 minutes, p=0.004) for the computer-aided design/computer-aided manufacturing technique compared with conventional techniques; operative times were shorter for patients undergoing the computer-aided design/computer-aided manufacturing technique, although this did not reach statistical significance. Perioperative and long-term outcomes were equivalent for the two groups, notably, hospital length of stay, recipient-site infection, partial and total flap loss, and rate of soft-tissue and bony tissue revisions. Microsurgical craniofacial reconstruction using a computer-assisted fibula flap technique yielded significantly shorter ischemia times amidst a higher number of osteotomies compared with conventional techniques. Therapeutic, III.

An Up-To-Date View of Cardiopulmonary Resusciation Instruction in Colleges and Universities

ERIC Educational Resources Information Center

Winkelman, Jack L.

1977-01-01

Cardiopulmonary resuscitation instruction can and should be included as part of first aid and emergency care courses in colleges and universities. Close working relationships with voluntary health organizations that sponsor such courses should be established. (MJB)

Target: Lifestyle.

ERIC Educational Resources Information Center

Poehlman, Eric T.

1985-01-01

"Target: Lifestyle" is a physical education curriculum adopted by Detroit Country Day School which incorporates instruction in nutrition, physical fitness, first aid, and lifetime sports. This curriculum aims to influence student attitudes and lifestyles in health and physical fitness. Four levels of instruction are described. (DF)

Utilizing Primary Sources as Building Blocks for Literacy.

ERIC Educational Resources Information Center

Massich, Mary; Munoz, Eric

1996-01-01

Describes instructional strategies using primary sources in middle school history instruction. Maintains that students need to make critical, personal connections to material before they understand it. The strategies examined use visual aids, living history presentations, realia, music, and primary documents. (MJP)

Computer-Assisted Programmed Instruction in Textiles.

ERIC Educational Resources Information Center

Kean, Rita C.; Laughlin, Joan

Students in an introductory textiles course at the University of Nebraska's College of Home Economics actively participate in the learning experience through a self-paced instructional technique. Specific learning packets were developed adapting programmed instructional learning materials to computer assisted instruction (CAI). A study booklet…

Las ayudas educativas en la educacion primaria (Teaching Aids in Elementary Education).

ERIC Educational Resources Information Center

Ministerio de Educacion Nacional, Bogota (Colombia). Centro Nacional de Documentacion e Informacion Pedagogica.

The Colombian Institute of Pedagogy (ICOLPE) has undertaken a study of the availability and use of teaching aids and instructional materials in that country on the primary level. This report contains the results of that study. The document provides a listing of companies producing teaching aids. Questionnaires (included) were sent to educational…

Theory and Praxis: Reflections and Lessons from a Bilateral Educational Aid Programme in Guinea-Bissau

ERIC Educational Resources Information Center

Santos, Júlio Gonçalves dos; Silva, Rui da

2017-01-01

This article examines Portuguese official aid (POA) in Guinea-Bissau, based on the experience of a bilateral educational aid Programme--PASEG (2000-2012). It explores the theory and praxis (understood as instructed action) of PASEG as a complex and transversal intervention in a context of fragility and political uncertainty. It discusses the…

Citation Patterns in the Computer-Based Instruction Literature.

ERIC Educational Resources Information Center

Wedman, John F.

1987-01-01

This study examined indirect communication patterns among professionals in the computer-based instruction field by analyzing citations from the Journal of Computer-Based Instruction. The patterns found provide the basis for identifying invisible colleges, defined here as communication networks that facilitate the diffusion of knowledge and direct…

Computer vs. Workbook Instruction in Second Language Acquisition.

ERIC Educational Resources Information Center

Nagata, Noriko

1996-01-01

Compares the effectiveness of Nihongo-CALI (Japanese Computer Assisted Language Instruction) with non-CALI workbook instruction. Findings reveal that given the same grammar notes and exercises, ongoing intelligent computer feedback is more effective than simple workbook answer sheets for developing learners' grammatical skill in producing Japanese…

How Effective Is Instructional Support for Learning with Computer Simulations?

ERIC Educational Resources Information Center

Eckhardt, Marc; Urhahne, Detlef; Conrad, Olaf; Harms, Ute

2013-01-01

The study examined the effects of two different instructional interventions as support for scientific discovery learning using computer simulations. In two well-known categories of difficulty, data interpretation and self-regulation, instructional interventions for learning with computer simulations on the topic "ecosystem water" were developed…

Effects of Using Simultaneous Prompting and Computer-Assisted Instruction during Small Group Instruction

ERIC Educational Resources Information Center

Ozen, Arzu; Ergenekon, Yasemin; Ulke-Kurkcuoglu, Burcu

2017-01-01

The current study investigated the relation between simultaneous prompting (SP), computer-assisted instruction (CAI), and the receptive identification of target pictures (presented on laptop computer) for four preschool students with developmental disabilities. The students' acquisition of nontarget information through observational learning also…

Computer-Aided Facilities Management Systems (CAFM).

ERIC Educational Resources Information Center

Cyros, Kreon L.

Computer-aided facilities management (CAFM) refers to a collection of software used with increasing frequency by facilities managers. The six major CAFM components are discussed with respect to their usefulness and popularity in facilities management applications: (1) computer-aided design; (2) computer-aided engineering; (3) decision support…

Computers in Composition Instruction. The Proceedings of a Research/Practice Conference Held at SWRL Educational Research and Development (Los Alamitos, California, April 22-23, 1982).

ERIC Educational Resources Information Center

Lawlor, Joseph, Ed.

Suggestions for integrating computer technology and composition instruction are presented in four conference papers, summaries of four conference courseware demonstrations, a paper describing computer-based evaluation of textual responses, and a reactor's address. In an overview of the current state of computer-based composition instruction,…

Behold the Trojan Horse: Instructional vs. Productivity Computing in the Classroom.

ERIC Educational Resources Information Center

Loop, Liza

This background paper for a symposium on the school of the future reviews the current instructional applications of computers in the classroom (the computer as a means or the subject of instruction), and suggests strategies that administrators might use to move toward viewing the computer as a productivity tool for students, i.e., its use for word…

Teaching Machines, Programming, Computers, and Instructional Technology: The Roots of Performance Technology.

ERIC Educational Resources Information Center

Deutsch, William

1992-01-01

Reviews the history of the development of the field of performance technology. Highlights include early teaching machines, instructional technology, learning theory, programed instruction, the systems approach, needs assessment, branching versus linear program formats, programing languages, and computer-assisted instruction. (LRW)

Designing effective animations for computer science instruction

NASA Astrophysics Data System (ADS)

Grillmeyer, Oliver

This study investigated the potential for animations of Scheme functions to help novice computer science students understand difficult programming concepts. These animations used an instructional framework inspired by theories of constructivism and knowledge integration. The framework had students make predictions, reflect, and specify examples to animate to promote autonomous learning and result in more integrated knowledge. The framework used animated pivotal cases to help integrate disconnected ideas and restructure students' incomplete ideas by illustrating weaknesses in their existing models. The animations scaffolded learners, making the thought processes of experts more visible by modeling complex and tacit information. The animation design was guided by prior research and a methodology of design and refinement. Analysis of pilot studies led to the development of four design concerns to aid animation designers: clearly illustrate the mapping between objects in animations with the actual objects they represent, show causal connections between elements, draw attention to the salient features of the modeled system, and create animations that reduce complexity. Refined animations based on these design concerns were compared to computer-based tools, text-based instruction, and simpler animations that do not embody the design concerns. Four studies comprised this dissertation work. Two sets of animated presentations of list creation functions were compared to control groups. No significant differences were found in support of animations. Three different animated models of traces of recursive functions ranging from concrete to abstract representations were compared. No differences in learning gains were found between the three models in test performance. Three models of animations of applicative operators were compared with students using the replacement modeler and the Scheme interpreter. Significant differences were found favoring animations that addressed causality and salience in their design. Lastly, two binary tree search algorithm animations designed to reduce complexity were compared with hand-tracing of calls. Students made fewer mistakes in predicting the tree traversal when guided by the animations. However, the posttest findings were inconsistent. In summary, animations designed based on the design concerns did not consistently add value to instruction in the form investigated in this research.

A Student Response System in an Electronic Classroom: Technology Aids for Large Classroom Instruction

NASA Astrophysics Data System (ADS)

Ober, D.; Errington, P.; Islam, S.; Robertson, T.; Watson, J.

1997-10-01

In the fall of 1996, thirteen (13) classrooms on the Ball State campus were equipped with technological aids to enhance learning in large classrooms (for typically 100 students or larger). Each classroom was equipped with the following built-in equipment: computer, zip drive, laser disc player, VCR, LAN and Internet connection, TV monitors, and Elmo overhead camera with large-screen projection system. This past fall semester a student response system was added to a 108-seat classroom in the Physics and Astronomy department for use with large General Education courses. Each student seat was equipped with a hardwired hand-held unit possessing input capabilities and LCD feedback for the student. The introduction of the student response system was added in order enhance more active learning by students in the large classroom environment. Attendance, quizzes, hour exams, and in-class surveys are early uses for the system; initial reactions by student and faculty users will be given.

Emergent Literacy Development and Computer Assisted Instruction

ERIC Educational Resources Information Center

Trotti, Judy; Hendricks, Randy; Bledsoe, Christie

2017-01-01

In this mixed-methods study, researchers examined the literacy development of prekindergarten students (N = 162) randomly placed in one of two treatment groups with each receiving 15 minutes of computer-assisted literacy instruction for four months. Literacy development of a control group of children not receiving computer-assisted instruction was…

Implications of Whole-Brained Theories of Learning and Thinking for Computer-Based Instruction.

ERIC Educational Resources Information Center

Torrance, E. Paul

1981-01-01

Discusses the implications of theories of hemispheric dominance for computer-assisted instruction, highlights some of the computer's instructional uses, lists specialized functions of the cerebral hemispheres, and lists recommended solutions to CBI program problems which were submitted by gifted children. Thirty-five sources are listed. (FM)

Computer-Assisted Instruction. Special Double Issue.

ERIC Educational Resources Information Center

Holmes, Glyn, Ed.

1984-01-01

This booklet presents evidence to support the idea that distinctions between the instructional and research applications of the computer are becoming blurred. The issue includes contributions from authors who are at the forefront of computer-assisted instruction (CAI) development in their respective fields. An attempt is made to represent most…

Mobile Computer-Assisted-Instruction in Rural New Mexico.

ERIC Educational Resources Information Center

Gittinger, Jack D., Jr.

The University of New Mexico's three-year Computer Assisted Instruction Project established one mobile and five permanent laboratories offering remedial and vocational instruction in winter, 1984-85. Each laboratory has a Degem learning system with minicomputer, teacher terminal, and 32 student terminals. A Digital PDP-11 host computer runs the…

"Intelligent" Computer Assisted Instruction (CAI) Applications. Interim Report.

ERIC Educational Resources Information Center

Brown, John Seely; And Others

Interim work is documented describing efforts to modify computer techniques used to recognize and process English language requests to an instructional simulator. The conversion from a hand-coded to a table driven technique are described in detail. Other modifications to a simulation based computer assisted instruction program to allow a gaming…

ADCIS Conference Proceedings. International Conference (29th, Oakland, California, November 9-12, 1987).

ERIC Educational Resources Information Center

Association for the Development of Computer-based Instructional Systems.

These proceedings include papers on such topics as authoring systems, computer-managed instruction, testing, instructional design, management education, simulations, intelligent computer-assisted instruction, and other areas related to computer-based education. Fifty-six papers and 104 abstracts are organized by Association for the Development of…

POSTOP: Postbuckled open-stiffener optimum panels, user's manual

NASA Technical Reports Server (NTRS)

Biggers, S. B.; Dickson, J. N.

1984-01-01

The computer program POSTOP developed to serve as an aid in the analysis and sizing of stiffened composite panels that may be loaded in the postbuckling regime, is intended for the preliminary design of metal or composite panels with open-section stiffeners, subjected to multiple combined biaxial compression (or tension), shear and normal pressure load cases. Longitudinal compression, however, is assumed to be the dominant loading. Temperature, initial bow eccentricity and load eccentricity effects are included. The panel geometry is assumed to be repetitive over several bays in the longitudinal (stiffener) direction as well as in the transverse direction. Analytical routines are included to compute panel stiffnesses, strains, local and panel buckling loads, and skin/stiffener interface stresses. The resulting program is applicable to stiffened panels as commonly used in fuselage, wing, or empennage structures. The capabilities and limitations of the code are described. Instructions required to use the program and several example problems are included.

Bibliography to Computer and History Instruction.

ERIC Educational Resources Information Center

Feichtl, Franz

1994-01-01

Presents a bibliography of 28 items related to the use of computers in history instruction. Focuses on materials dealing with secondary and college-level instruction. Includes 11 German-language items. (CFR)

Utilizing New Audiovisual Resources

ERIC Educational Resources Information Center

Miller, Glen

1975-01-01

The University of Arizona's Agriculture Department has found that video cassette systems and 8 mm films are excellent audiovisual aids to classroom instruction at the high school level in small gasoline engines. Each system is capable of improving the instructional process for motor skill development. (MW)

INSTRUCTIONAL MATERIALS CATALOG.

ERIC Educational Resources Information Center

Ohio Vocational Agriculture Instructional Materials Service, Columbus.

THE TITLE, IDENTIFICATION NUMBER, DATE OF PUBLICATION, PAGINATION, A BRIEF DESCRIPTION, AND PRICE ARE GIVEN FOR EACH OF THE INSTRUCTIONAL MATERIALS AND AUDIOVISUAL AIDS INCLUDED IN THIS CATALOG. TOPICS COVERED ARE FIELD CORPS, HORTICULTURE, ANIMAL SCIENCE, SOILS, AGRICULTURAL ENGINEERING, AND FARMING PROGRAMS. AN ORDER FORM IS INCLUDED. (JM)

Microcomputers in Special Education: Some New Opportunities, Some Old Problems.

ERIC Educational Resources Information Center

Hannaford, Alonzo E.

1983-01-01

Discusses ways in which microprocessors are aiding the handicapped in three major areas: (1) compensation (sensory, communication, and compensation for control); (2) management (personal and educational); and (3) instructional delivery (uses, advantages, problems, educational compatibility, instructional design, technical adequacy). (EJS)

Civil Aviation and Facilities. Aerospace Education II. Instructional Unit IV.

ERIC Educational Resources Information Center

Elmer, James D.

This publication accompanies the textbook entitled "Civil Aviation and Facilities," published in the Aerospace Education II series. It provides teacher guidelines with regard to objectives (traditional and behavioral), suggested outlines, orientation, suggested key points, suggestions for teaching, instructional aids, projects, and…

Psychometric Analysis of the Thermochemistry Concept Inventory

ERIC Educational Resources Information Center

Wren, David; Barbera, Jack

2014-01-01

Assessing conceptual understanding of foundational topics before instruction on higher-order concepts can provide chemical educators with information to aid instructional design. This study provides an instrument that can be used to identify students' alternative conceptions regarding thermochemistry concepts. The Thermochemistry Concept Inventory…

The role of a clinically based computer department of instruction in a school of medicine.

PubMed

Yamamoto, W S

1991-10-01

The evolution of activities and educational directions of a department of instruction in medical computer technology in a school of medicine are reviewed. During the 18 years covered, the society at large has undergone marked change in availability and use of computation in every aspect of medical care. It is argued that a department of instruction should be clinical and develop revenue sources based on patient care, perform technical services for the institution with a decentralized structure, and perform both health services and scientific research. Distinction should be drawn between utilization of computing in medical specialties, library function, and instruction in computer science. The last is the proper arena for the academic content of instruction and is best labelled as the philosophical basis of medical knowledge, in particular, its epistemology. Contemporary pressures for teaching introductory computer skills are probably temporary.

Management of Hearing Aid Assembly by Urban-Dwelling Hearing-Impaired Adults in a Developed Country

PubMed Central

Keidser, Gitte; Hartley, Lisa; Caposecco, Andrea; Hickson, Louise; Meyer, Carly

2011-01-01

A self-fitting hearing aid, designed to be assembled and programmed without audiological or computer support, could bring amplification to millions of people in developing countries, who remain unaided due to the lack of a local, professional, audiological infrastructure. The ability to assemble and insert a hearing aid is fundamental to the successful use of a self-fitting device. In this study, the management of such tasks was investigated. Eighty older, urban-dwelling, hearing-impaired adults in a developed country were asked to follow a set of written, illustrated instructions to assemble two slim-fit behind-the-ear hearing aids. Participants were allowed to access assistance with the task from an accompanying partner. A range of personal and audiometric variables was measured through the use of structured questionnaires and standardized tests of health literacy, cognitive function, and manual dexterity. The results showed that 99% of participants were able to complete the hearing aid assembly task, either on their own or with assistance. Health literacy, or the ability to read and understand health-related text, and gender most strongly influenced participants’ ability to complete the assembly task independently and accurately. Higher levels of health literacy were associated with an increased likelihood of independent and successful task completion. Male participants were more likely to complete the task on their own, while female participants were more likely to assemble the device without errors. The results of this study will inform future work regarding development of educational material for the self-fitting hearing aid as well as candidacy for such a device. PMID:22200734

Integrated System Test of the Advanced Instructional System (AIS). Final Report.

ERIC Educational Resources Information Center

Lintz, Larry M.; And Others

The integrated system test for the Advanced Instructional System (AIS) was designed to provide quantitative information regarding training time reductions resulting from certain computer managed instruction features. The reliabilities of these features and of support systems were also investigated. Basic computer managed instruction reduced…

Project-Based Teaching-Learning Computer-Aided Engineering Tools

ERIC Educational Resources Information Center

Simoes, J. A.; Relvas, C.; Moreira, R.

2004-01-01

Computer-aided design, computer-aided manufacturing, computer-aided analysis, reverse engineering and rapid prototyping are tools that play an important key role within product design. These are areas of technical knowledge that must be part of engineering and industrial design courses' curricula. This paper describes our teaching experience of…

A Reading Skills Development Program for Adult Non-Readers. Featuring: Supplementary Graphics and Sound (Voice Tutorials). Volumes 1 and 2. The TRS-80 Computer Assisted Instruction Series for Adult Basic Education Students.

ERIC Educational Resources Information Center

San Antonio State Hospital, TX. Office of Education Services.

This instructional manual consists of materials for use in implementing a computer-assisted instructional program in reading skills development for adult nonreaders. Discussed first are the project during which this instructional program and manual were developed and the goals of the computer-assisted beginning reading program, a major feature of…

"Building the Perfect Beast": Assessing the Effects of CMI (Computer-Managed Instruction) on the Teaching of, and Student Writing about, Literature.

ERIC Educational Resources Information Center

Widdicombe, Richard Toby

Measuring the effects of computer-managed instruction (CMI) on the teaching of and student writing about literature involves more than having students write and then evaluating their performance. Measurement is made difficult by the fact that the computer technology used in instruction is in a state of flux. Variation of computer technology,…

Improving the Quality and Effectiveness of Computer-Mediated Instruction Through Usability Evaluations

ERIC Educational Resources Information Center

Crowther, Michael S.; Keller, Chris C.; Waddoups, Gregory L.

2004-01-01

Brigham Young University's Center for Instructional Design (CID) creates online courses and multimedia instructional applications for university faculty. This paper asserts that including usability testing as a part of evaluation improves the quality and effectiveness of computer-mediated instruction. The paper describes the fundamental purpose…

The Use of Audio and Animation in Computer Based Instruction.

ERIC Educational Resources Information Center

Koroghlanian, Carol; Klein, James D.

This study investigated the effects of audio, animation, and spatial ability in a computer-based instructional program for biology. The program presented instructional material via test or audio with lean text and included eight instructional sequences presented either via static illustrations or animations. High school students enrolled in a…

Correlating Computer Database Programs with Social Studies Instruction.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This unit emphasizes the integration of software in a focus on the classroom instruction process. Student activities are based on plans and ideas for instructional units presented by a teacher who describes and demonstrates the activities. Integration has occurred when computer applications are included in an instructional activity. This guide…

Hypermedia and intelligent tutoring applications in a mission operations environment

NASA Technical Reports Server (NTRS)

Ames, Troy; Baker, Clifford

1990-01-01

Hypermedia, hypertext and Intelligent Tutoring System (ITS) applications to support all phases of mission operations are investigated. The application of hypermedia and ITS technology to improve system performance and safety in supervisory control is described - with an emphasis on modeling operator's intentions in the form of goals, plans, tasks, and actions. Review of hypermedia and ITS technology is presented as may be applied to the tutoring of command and control languages. Hypertext based ITS is developed to train flight operation teams and System Test and Operation Language (STOL). Specific hypermedia and ITS application areas are highlighted, including: computer aided instruction of flight operation teams (STOL ITS) and control center software development tools (CHIMES and STOL Certification Tool).