An Introduction to the Computerized Assessment of Art-Based Instruments

ERIC Educational Resources Information Center

Mattson, Donald C.

2012-01-01

This article provides a historical overview of computer-assisted art assessment, introduces the basic concepts of computerized assessment of art-based instruments (CAABI), and offers a tutorial to assist art therapists in the study of its application. Understanding this emergent technology may assist art therapists in overcoming hesitancy in…

Guided Immediate Implant Placement with Wound Closure by Computer-Aided Design/Computer-Assisted Manufacture Sealing Socket Abutment: Case Report.

PubMed

Finelle, Gary; Lee, Sang J

Digital technology has been widely used in the field of implant dentistry. From a surgical standpoint, computer-guided surgery can be utilized to enhance primary implant stability and to improve the precision of implant placement. From a prosthetic standpoint, computer-aided design/computer-assisted manufacture (CAD/CAM) technology has brought about various restorative options, including the fabrication of customized abutments through a virtual design based on computer-guided surgical planning. This case report describes a novel technique combining the use of a three-dimensional (3D) printed surgical template for the immediate placement of an implant, with CAD/CAM technology to optimize hard and soft tissue healing after bone grafting with the use of a socket sealing abutment.

[APPLICATION OF COMPUTER-ASSISTED TECHNOLOGY IN ANALYSIS OF REVISION REASON OF UNICOMPARTMENTAL KNEE ARTHROPLASTY].

PubMed

Jia, Di; Li, Yanlin; Wang, Guoliang; Gao, Huanyu; Yu, Yang

2016-01-01

To conclude the revision reason of unicompartmental knee arthroplasty (UKA) using computer-assisted technology so as to provide reference for reducing the revision incidence and improving the level of surgical technique and rehabilitation. The relevant literature on analyzing revision reason of UKA using computer-assisted technology in recent years was extensively reviewed. The revision reasons by computer-assisted technology are fracture of the medial tibial plateau, progressive osteoarthritis of reserved compartment, dislocation of mobile bearing, prosthesis loosening, polyethylene wear, and unexplained persistent pain. Computer-assisted technology can be used to analyze the revision reason of UKA and guide the best operating method and rehabilitation scheme by simulating the operative process and knee joint activities.

Computer-assisted surgery in the lower jaw: double surgical guide for immediately loaded implants in postextractive sites-technical notes and a case report.

PubMed

De Santis, Daniele; Canton, Luciano Claudio; Cucchi, Alessandro; Zanotti, Guglielmo; Pistoia, Enrico; Nocini, Pier Francesco

2010-01-01

Computer-assisted surgery is based on computerized tomography (CT) scan technology to plan the placement of dental implants and a computer-aided design/computer-aided manufacturing (CAD-CAM) technology to create a custom surgical template. It provides guidance for insertion implants after analysis of existing alveolar bone and planning of implant position, which can be immediately loaded, therefore achieving esthetic and functional results in a surgical stage. The absence of guidelines to treat dentulous areas is often due to a lack of computer-assisted surgery. The authors have attempted to use this surgical methodology to replace residual teeth with an immediate implantoprosthetic restoration. The aim of this case report is to show the possibility of treating a dentulous patient by applying a computer-assisted surgical protocol associated with the use of a double surgical template: one before extraction and a second one after extraction of selected teeth.

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

PubMed

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-01-01

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Using computer-assisted learning to engage diverse learning styles in understanding business management principles.

PubMed

Frost, Mary E; Derby, Dustin C; Haan, Andrea G

2013-06-27

Objective : Changes in small business and insurance present challenges for newly graduated chiropractors. Technology that reaches identified, diverse learning styles may assist the chiropractic student in business classes to meet course outcomes better. Thus, the purpose of our study is to determine if the use of technology-based instructional aids enhance students' mastery of course learning outcomes. Methods : Using convenience sampling, 86 students completed a survey assessing course learning outcomes, learning style, and the helpfulness of lecture and computer-assisted learning related to content mastery. Quantitative analyses occurred. Results : Although respondents reported not finding the computer-assisted learning as helpful as the lecture, significant relationships were found between pre- and post-assisted learning measures of the learning outcomes 1 and 2 for the visual and kinesthetic groups. Surprisingly, however, all learning style groups exhibited significant pre- and post-assisted learning appraisal relationships with learning outcomes 3 and 4. Conclusion : While evidence exists within the current study of a relationship between students' learning of the course content corollary to the use of technologic instructional aids, the exact nature of the relationship remains unclear.

Effect of Network-Assisted Language Teaching Model on Undergraduate English Skills

ERIC Educational Resources Information Center

He, Chunyan

2013-01-01

With the coming of the information age, computer-based teaching model has had an important impact on English teaching. Since 2004, the trial instruction on Network-assisted Language Teaching (NALT) Model integrating the English instruction and computer technology has been launched at some universities in China, including China university of…

University Faculty Teaching Activities in an Electronic Curriculum.

ERIC Educational Resources Information Center

Eisner, John; Carter, Thomas

1989-01-01

Discusses the changes in the instructional activities of university faculty members as a result of new computer-related educational technologies. Topics discussed include computer-assisted instruction; computer-managed instruction; optical discs; microcomputers; lecturing versus computer-based tutorials; videodiscs; computerized evaluative…

Assistive technology and learning disabilities: today's realities and tomorrow's promises.

PubMed

Lewis, R B

1998-01-01

Many forms of technology, both "high" and "low," can help individuals with learning disabilities capitalize on their strengths and bypass, or compensate for, their disabilities. This article surveys the current status of assistive technology for this population and reflects on future promises and potential problems. In addition, a model is presented for conceptualizing assistive technology in terms of the types of barriers it helps persons with disabilities to surmount. Several current technologies are described and the research supporting their effectiveness reviewed: word processing, computer-based instruction in reading and other academic areas, interactive videodisc interventions for math, and technologies for daily life. In conclusion, three themes related to the future success of assistive technology applications are discussed: equity of access to technology; ease of technology, use; and emergent technologies, such as virtual reality.

The Evolution of Networked Computing in the Teaching of Japanese as a Foreign Language.

ERIC Educational Resources Information Center

Harrison, Richard

1998-01-01

Reviews the evolution of Internet-based projects in Japanese computer-assisted language learning and suggests future directions in which the field may develop, based on emerging network technology and learning theory. (Author/VWL)

Using assistive technology for schoolwork: the experience of children with physical disabilities.

PubMed

Murchland, Sonya; Parkyn, Helen

2010-01-01

This study explored the experience of children with physical disabilities using assistive technology for participation with schoolwork to gain a greater understanding of their perspectives and subjective experiences. A qualitative study involving thematic analysis of in-depth interviews of the child with a parent or significant adult. Purposeful sampling from a larger study recruited five children aged between 10 and 14 years, with differing physical disabilities who attended mainstream schools. All children used computer-based assistive technology. All of the children recognised that assistive technology enabled them to participate and reduced the impact of their physical disability, allowing independent participation, and facilitated higher learning outcomes. Issues related to ease of use, social implications and assistive technology systems are discussed.

Are we there yet? Evaluating commercial grade brain-computer interface for control of computer applications by individuals with cerebral palsy.

PubMed

Taherian, Sarvnaz; Selitskiy, Dmitry; Pau, James; Claire Davies, T

2017-02-01

Using a commercial electroencephalography (EEG)-based brain-computer interface (BCI), the training and testing protocol for six individuals with spastic quadriplegic cerebral palsy (GMFCS and MACS IV and V) was evaluated. A customised, gamified training paradigm was employed. Over three weeks, the participants spent two sessions exploring the system, and up to six sessions playing the game which focussed on EEG feedback of left and right arm motor imagery. The participants showed variable inconclusive results in the ability to produce two distinct EEG patterns. Participant performance was influenced by physical illness, motivation, fatigue and concentration. The results from this case study highlight the infancy of BCIs as a form of assistive technology for people with cerebral palsy. Existing commercial BCIs are not designed according to the needs of end-users. Implications for Rehabilitation Mood, fatigue, physical illness and motivation influence the usability of a brain-computer interface. Commercial brain-computer interfaces are not designed for practical assistive technology use for people with cerebral palsy. Practical brain-computer interface assistive technologies may need to be flexible to suit individual needs.

Music and Computing.

ERIC Educational Resources Information Center

Boody, Charles G., Ed.

1986-01-01

Six articles on music and computing address development of computer-based music technology, computer assisted instruction (CAI) in ear training and music fundamentals, a machine-independent data structure for musical pitch relationship representation, touch tablet input device in a melodic dictation CAI game, and systematic evaluation strategies…

The Role of Computer-Assisted Technology in Post-Traumatic Orbital Reconstruction: A PRISMA-driven Systematic Review.

PubMed

Wan, Kelvin H; Chong, Kelvin K L; Young, Alvin L

2015-12-08

Post-traumatic orbital reconstruction remains a surgical challenge and requires careful preoperative planning, sound anatomical knowledge and good intraoperative judgment. Computer-assisted technology has the potential to reduce error and subjectivity in the management of these complex injuries. A systematic review of the literature was conducted to explore the emerging role of computer-assisted technologies in post-traumatic orbital reconstruction, in terms of functional and safety outcomes. We searched for articles comparing computer-assisted procedures with conventional surgery and studied outcomes on diplopia, enophthalmos, or procedure-related complications. Six observational studies with 273 orbits at a mean follow-up of 13 months were included. Three out of 4 studies reported significantly fewer patients with residual diplopia in the computer-assisted group, while only 1 of the 5 studies reported better improvement in enophthalmos in the assisted group. Types and incidence of complications were comparable. Study heterogeneities limiting statistical comparison by meta-analysis will be discussed. This review highlights the scarcity of data on computer-assisted technology in orbital reconstruction. The result suggests that computer-assisted technology may offer potential advantage in treating diplopia while its role remains to be confirmed in enophthalmos. Additional well-designed and powered randomized controlled trials are much needed.

Design of Intelligent Robot as A Tool for Teaching Media Based on Computer Interactive Learning and Computer Assisted Learning to Improve the Skill of University Student

NASA Astrophysics Data System (ADS)

Zuhrie, M. S.; Basuki, I.; Asto B, I. G. P.; Anifah, L.

2018-01-01

The focus of the research is the teaching module which incorporates manufacturing, planning mechanical designing, controlling system through microprocessor technology and maneuverability of the robot. Computer interactive and computer-assisted learning is strategies that emphasize the use of computers and learning aids (computer assisted learning) in teaching and learning activity. This research applied the 4-D model research and development. The model is suggested by Thiagarajan, et.al (1974). 4-D Model consists of four stages: Define Stage, Design Stage, Develop Stage, and Disseminate Stage. This research was conducted by applying the research design development with an objective to produce a tool of learning in the form of intelligent robot modules and kit based on Computer Interactive Learning and Computer Assisted Learning. From the data of the Indonesia Robot Contest during the period of 2009-2015, it can be seen that the modules that have been developed confirm the fourth stage of the research methods of development; disseminate method. The modules which have been developed for students guide students to produce Intelligent Robot Tool for Teaching Based on Computer Interactive Learning and Computer Assisted Learning. Results of students’ responses also showed a positive feedback to relate to the module of robotics and computer-based interactive learning.

Computer-Assisted Career Guidance Systems: A Part of NCDA History

ERIC Educational Resources Information Center

Harris-Bowlsbey, JoAnn

2013-01-01

The first computer-assisted career planning systems were developed in the late 1960s and were based soundly on the best of career development and decision-making theory. Over the years, this tradition has continued as the technology that delivers these systems' content has improved dramatically and as they have been universally accepted as…

Using computer aided case based reasoning to support clinical reasoning in community occupational therapy.

PubMed

Taylor, Bruce; Robertson, David; Wiratunga, Nirmalie; Craw, Susan; Mitchell, Dawn; Stewart, Elaine

2007-08-01

Community occupational therapists have long been involved in the provision of environmental control systems. Diverse electronic technologies with the potential to improve the health and quality of life of selected clients have developed rapidly in recent years. Occupational therapists employ clinical reasoning in order to determine the most appropriate technology to meet the needs of individual clients. This paper describes a number of the drivers that may increase the adoption of information and communication technologies in the occupational therapy profession. It outlines case based reasoning as understood in the domains of expert systems and knowledge management and presents the preliminary results of an ongoing investigation into the potential of a prototype computer aided case based reasoning tool to support the clinical reasoning of community occupational therapists in the process of assisting clients to choose home electronic assistive or smart house technology.

Technology-Assisted Reading for Improving Reading Skills for Young South African Learners

ERIC Educational Resources Information Center

van Wyk, Gerda; Louw, Arno

2008-01-01

This paper addresses the controversial issues of improving the reading skills of young learners through technology-assisted reading programmes. On reporting the results of primary school learners from grade 2 to grade 7 who participated in a computer-based reading programme for seven months, we try to answer the critical questions of whether…

Learning Tools for Knowledge Nomads: Using Personal Digital Assistants (PDAs) in Web-based Learning Environments.

ERIC Educational Resources Information Center

Loh, Christian Sebastian

2001-01-01

Examines how mobile computers, or personal digital assistants (PDAs), can be used in a Web-based learning environment. Topics include wireless networks on college campuses; online learning; Web-based learning technologies; synchronous and asynchronous communication via the Web; content resources; Web connections; and collaborative learning. (LRW)

Educational Technology: Computer-Based Instruction. Hearing before the Subcommittee on Technology and Competitiveness of the Committee on Science, Space, and Technology. U.S. House of Representatives, One Hundred Second Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This hearing on computer assisted instruction and the use of educational technology in classrooms was held in response to a presidential request that instructional innovation be given special attention, particularly in science and mathematics education, in every congressional district. This transcript of the hearing includes statements presented…

A Craniomaxillofacial Surgical Assistance Workstation for Enhanced Single-Stage Reconstruction Using Patient-Specific Implants.

PubMed

Murphy, Ryan J; Liacouras, Peter C; Grant, Gerald T; Wolfe, Kevin C; Armand, Mehran; Gordon, Chad R

2016-11-01

Craniomaxillofacial reconstruction with patient-specific, customized craniofacial implants (CCIs) is ideal for skeletal defects involving areas of aesthetic concern-the non-weight-bearing facial skeleton, temporal skull, and/or frontal-forehead region. Results to date are superior to a variety of "off-the-shelf" materials, but require a protocol computed tomography scan and preexisting defect for computer-assisted design/computer-assisted manufacturing of the CCI. The authors developed a craniomaxillofacial surgical assistance workstation to address these challenges and intraoperatively guide CCI modification for an unknown defect size/shape. First, the surgeon designed an oversized CCI based on his/her surgical plan. Intraoperatively, the surgeon resected the bone and digitized the resection using a navigation pointer. Next, a projector displayed the limits of the craniofacial bone defect onto the prefabricated, oversized CCI for the size modification process; the surgeon followed the projected trace to modify the implant. A cadaveric study compared the standard technique (n = 1) to the experimental technique (n = 5) using surgical time and implant fit. The technology reduced the time and effort needed to resize the oversized CCI by an order of magnitude as compared with the standard manual resizing process. Implant fit was consistently better for the computer-assisted case compared with the control by at least 30%, requiring only 5.17 minutes in the computer-assisted cases compared with 35 minutes for the control. This approach demonstrated improvement in surgical time and accuracy of CCI-based craniomaxillofacial reconstruction compared with previously reported methods. The craniomaxillofacial surgical assistance workstation will provide craniofacial surgeons a computer-assisted technology for effective and efficient single-stage reconstruction when exact craniofacial bone defect sizes are unknown.

Hardware Considerations for Computer Based Education in the 1980's.

ERIC Educational Resources Information Center

Hirschbuhl, John J.

1980-01-01

In the future, computers will be needed to sift through the vast proliferation of available information. Among new developments in computer technology are the videodisc microcomputers and holography. Predictions for future developments include laser libraries for the visually handicapped and Computer Assisted Dialogue. (JN)

Knowledge Based Software Assistant Conference Proceedings (4th) Held in Syracuse, New York on 12-14 September 1989

DTIC Science & Technology

1990-05-01

Sanders Associates. Inc. A demonstration of knowledge-based support for the evolut ;cnry development of software system requirements uskig mitV/9 text...Conference Commiffee W Douga W~t Spin-Off Technologies 4 AN OVERVIEW OF RADC’S KNOWLEDGE BASED SOFTWARE ASSISTANT PROGRAM Donald M. Elefante Rome Air...Knowledge-Based Software Assistant is a formally based, computer-mediated paradigm for the specification, development, evolution , and Ir ig term

The application of computer assisted technologies (CAT) in the rehabilitation of cognitive functions in psychiatric disorders of childhood and adolescence.

PubMed

Srebnicki, Tomasz; Bryńska, Anita

2016-01-01

First applications of computer-assisted technologies (CAT) in the rehabilitation of cognitive deficits, including child and adolescent psychiatric disorders date back to the 80's last century. Recent developments in computer technologies, wide access to the Internet and vast expansion of electronic devices resulted in dynamic increase in therapeutic software as well as supporting devices. The aim of computer assisted technologies is the improvement in the comfort and quality of life as well as the rehabilitation of impaired functions. The goal of the article is the presentation of most common computer-assisted technologies used in the therapy of children and adolescents with cognitive deficits as well as the literature review of their effectiveness including the challenges and limitations in regard to the implementation of such interventions.

Use of Computer and Mobile Technologies in the Treatment of Depression.

PubMed

Callan, Judith A; Wright, Jesse; Siegle, Greg J; Howland, Robert H; Kepler, Britney B

2017-06-01

Major depression (MDD) is a common and disabling disorder. Research has shown that most people with MDD receive either no treatment or inadequate treatment. Computer and mobile technologies may offer solutions for the delivery of therapies to untreated or inadequately treated individuals with MDD. The authors review currently available technologies and research aimed at relieving symptoms of MDD. These technologies include computer-assisted cognitive-behavior therapy (CCBT), web-based self-help, Internet self-help support groups, mobile psychotherapeutic interventions (i.e., mobile applications or apps), technology enhanced exercise, and biosensing technology. Copyright © 2017 Elsevier Inc. All rights reserved.

Computers in medicine: liability issues for physicians.

PubMed

Hafner, A W; Filipowicz, A B; Whitely, W P

1989-07-01

Physicians routinely use computers to store, access, and retrieve medical information. As computer use becomes even more widespread in medicine, failure to utilize information systems may be seen as a violation of professional custom and lead to findings of professional liability. Even when a technology is not widespread, failure to incorporate it into medical practice may give rise to liability if the technology is accessible to the physician and reduces risk to the patient. Improvement in the availability of medical information sources imposes a greater burden on the physician to keep current and to obtain informed consent from patients. To routinely perform computer-assisted literature searches for informed consent and diagnosis is 'good medicine'. Clinical and diagnostic applications of computer technology now include computer-assisted decision making with the aid of sophisticated databases. Although such systems will expand the knowledge base and competence of physicians, malfunctioning software raises a major liability question. Also, complex computer-driven technology is used in direct patient care. Defective or improperly used hardware or software can lead to patient injury, thus raising additional complicated questions of professional liability and product liability.

Computer-Assisted Culture Learning in an Online Augmented Reality Environment Based on Free-Hand Gesture Interaction

ERIC Educational Resources Information Center

Yang, Mau-Tsuen; Liao, Wan-Che

2014-01-01

The physical-virtual immersion and real-time interaction play an essential role in cultural and language learning. Augmented reality (AR) technology can be used to seamlessly merge virtual objects with real-world images to realize immersions. Additionally, computer vision (CV) technology can recognize free-hand gestures from live images to enable…

The Effects of Computer-Assisted Feedback Strategies in Technology Education: A Comparison of Learning Outcomes

ERIC Educational Resources Information Center

Adams, Ruifang Hope; Strickland, Jane

2012-01-01

This study investigated the effects of computer-assisted feedback strategies that have been utilized by university students in a technology education curriculum. Specifically, the study examined the effectiveness of the computer-assisted feedback strategy "Knowledge of Response feedback" (KOR), and the "Knowledge of Correct Responses feedback"…

The Application of Learning Styles to Computer Assisted Instruction in Nursing Education

DTIC Science & Technology

1991-01-01

nursing profession is to integrate computer technology into the learning process at all levels of nursing education . In order to successfully accomplish... learning styles. * Computer technology needs to be integrated into nursing education , research and practice. * * An evaluation tool needs to be...Computer-assisted video instruction Learning Styles and CAI 71 References Aiken, E. (1990). Continuing nursing education in computer technology : A regional

What's New in Software? Current Sources of Information Boost Effectiveness of Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Ellsworth, Nancy J.

1990-01-01

This article reviews current resources on computer-assisted instruction. Included are sources of software and hardware evaluations, advances in current technology, research, an information hotline, and inventories of available technological assistance. (DB)

Providing Assistive Technology Applications as a Service Through Cloud Computing.

PubMed

Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

2015-01-01

Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

Legal Issues and Computer Use by School-Based Audiologists and Speech-Language Pathologists.

ERIC Educational Resources Information Center

Wynne, Michael K.; Hurst, David S.

1995-01-01

This article reviews ethical and legal issues regarding school-based integration and application of technologies, particularly when used by speech-language pathologists and audiologists. Four issues are addressed: (1) software copyright and licensed use; (2) information access and the right to privacy; (3) computer-assisted or…

A Comparative Study of Paper-Based and Computer-Based Contextualization in Vocabulary Learning of EFL Students

ERIC Educational Resources Information Center

Ahmadian, Mousa; Amerian, Majid; Goodarzi, Ahmad

2015-01-01

Vocabulary acquisition is one of the largest and most important tasks in language classes. New technologies, such as computers, have helped a lot in this way. The importance of the issue led the researchers to do the present study which concerns the comparison of contextualized vocabulary learning on paper and through Computer Assisted Language…

Objectively Determining the Educational Potential of Computer and Video-Based Courseware; or, Producing Reliable Evaluations Despite the Dog and Pony Show.

ERIC Educational Resources Information Center

Barrett, Andrew J.; And Others

The Center for Interactive Technology, Applications, and Research at the College of Engineering of the University of South Florida (Tampa) has developed objective and descriptive evaluation models to assist in determining the educational potential of computer and video courseware. The computer-based courseware evaluation model and the video-based…

76 FR 61717 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... computer science based technology that may provide the capability of detecting untoward events such as... is comprised of a dedicated computer server that executes specially designed software with input data... computer assisted clinical ordering. J Biomed Inform. 2003 Feb-Apr;36(1-2):4-22. [PMID 14552843...

Information and Communication Technology in the Israeli Educational System: Past, Present and Future.

ERIC Educational Resources Information Center

Katz, Yaacov J.

2002-01-01

Describes the development of the use of information and communication technology (ICT) in the Israeli educational system. Discusses a behaviorist approach to computer assisted instruction; open-ended courseware; constructivist approaches to multimedia, including simulations, modeling, and virtual reality; technology-based distance learning; and…

Synthesizing Results from Empirical Research on Computer-Based Scaffolding in STEM Education: A Meta-Analysis

ERIC Educational Resources Information Center

Belland, Brian R.; Walker, Andrew E.; Kim, Nam Ju; Lefler, Mason

2017-01-01

Computer-based scaffolding assists students as they generate solutions to complex problems, goals, or tasks, helping increase and integrate their higher order skills in the process. However, despite decades of research on scaffolding in STEM (science, technology, engineering, and mathematics) education, no existing comprehensive meta-analysis has…

Evaluating a Web-Based Video Corpus through an Analysis of User Interactions

ERIC Educational Resources Information Center

Caws, Catherine G.

2013-01-01

As shown by several studies, successful integration of technology in language learning requires a holistic approach in order to scientifically understand what learners do when working with web-based technology (cf. Raby, 2007). Additionally, a growing body of research in computer assisted language learning (CALL) evaluation, design and…

Medication safety and knowledge-based functions: a stepwise approach against information overload.

PubMed

Patapovas, Andrius; Dormann, Harald; Sedlmayr, Brita; Kirchner, Melanie; Sonst, Anja; Müller, Fabian; Pfistermeister, Barbara; Plank-Kiegele, Bettina; Vogler, Renate; Maas, Renke; Criegee-Rieck, Manfred; Prokosch, Hans-Ulrich; Bürkle, Thomas

2013-09-01

The aim was to improve medication safety in an emergency department (ED) by enhancing the integration and presentation of safety information for drug therapy. Based on an evaluation of safety of drug therapy issues in the ED and a review of computer-assisted intervention technologies we redesigned an electronic case sheet and implemented computer-assisted interventions into the routine work flow. We devised a four step system of alerts, and facilitated access to different levels of drug information. System use was analyzed over a period of 6 months. In addition, physicians answered a survey based on the technology acceptance model TAM2. The new application was implemented in an informal manner to avoid work flow disruption. Log files demonstrated that step I, 'valid indication' was utilized for 3% of the recorded drugs and step II 'tooltip for well-known drug risks' for 48% of the drugs. In the questionnaire, the computer-assisted interventions were rated better than previous paper based measures (checklists, posters) with regard to usefulness, support of work and information quality. A stepwise assisting intervention received positive user acceptance. Some intervention steps have been seldom used, others quite often. We think that we were able to avoid over-alerting and work flow intrusion in a critical ED environment. © 2013 The Authors. British Journal of Clinical Pharmacology © 2013 The British Pharmacological Society.

Access to computer-based leisure for individuals with profound disabilities.

PubMed

Bache, Jane; Derwent, Gary

2008-01-01

Advances in computer technology and the Internet have meant that more and more occupations can be made available to disabled individuals, including occupations generally considered to be leisure. However, computers and the Internet also provide barriers to access for these individuals. This article discusses some of these barriers, solutions to them and highlights the complexities involved in the provision of a computer-based assistive technology solution for access to leisure for a profoundly disabled young lady. It also points out the need for the input of a highly skilled, multi-disciplinary team in the assessment for and provision of such a system.

Computer Assisted Instruction. 1988-89. 353 Project.

ERIC Educational Resources Information Center

Granite School District, Salt Lake City, UT.

The Granite School District (Utah) conducted a project to implement competency-based/technology-assisted instruction in all of its adult high schools. The district adopted the state's core curriculum in order to establish clearly defined instructional goals and objectives; revised and added to the instructional units; made the curriculum uniform…

Value of wireless personal digital assistants for practice: perceptions of advanced practice nurses.

PubMed

Garrett, Bernard; Klein, Gerri

2008-08-01

The aims were to explore advanced practice nurses' perceptions on wireless Personal Digital Assistant technologies, to establish the type and range of tools that would be useful to support their practice and to identify any requirements and limitations that may impact the implementation of wireless Personal Digital Assistants in practice. The wireless Personal Digital Assistant is becoming established as a hand-held computing tool for healthcare professionals. The reflections of advanced practice nurses' about the value of wireless Personal Digital Assistants and its potential to contribute to improved patient care has not been investigated. A qualitative interpretivist design was used to explore advanced practice nurses' perceptions on the value of wireless Personal Digital Assistant technologies to support their practice. The data were collected using survey questionnaires and individual and focus group interviews with nurse practitioners, clinical nurse specialists and information technology managers based in British Columbia, Canada. An open-coding content analysis was performed using qualitative data analysis software. Wireless Personal Digital Assistant's use supports the principles of pervasivity and is a technology rapidly being adopted by advanced practice nurses. Some nurses indicated a reluctance to integrate wireless Personal Digital Assistant technologies into their practices because of the cost and the short technological life cycle of these devices. Many of the barriers which precluded the use of wireless networks within facilities are being removed. Nurses demonstrated a complex understanding of wireless Personal Digital Assistant technologies and gave good rationales for its integration in their practice. Nurses identified improved client care as the major benefit of this technology in practice and the type and range of tools they identified included clinical reference tools such as drug and diagnostic/laboratory reference applications and wireless communications. Nurses in this study support integrating wireless mobile computing technologies into their practice to improve client care.

Incorporating electronic-based and computer-based strategies: graduate nursing courses in administration.

PubMed

Graveley, E; Fullerton, J T

1998-04-01

The use of electronic technology allows faculty to improve their course offerings. Four graduate courses in nursing administration were contemporized to incorporate fundamental computer-based skills that would be expected of graduates in the work setting. Principles of adult learning offered a philosophical foundation that guided course development and revision. Course delivery strategies included computer-assisted instructional modules, e-mail interactive discussion groups, and use of the electronic classroom. Classroom seminar discussions and two-way interactive video conferencing focused on group resolution of problems derived from employment settings and assigned readings. Using these electronic technologies, a variety of courses can be revised to accommodate the learners' needs.

Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

The Role of the Occupational and Physical Therapist in Assistive Technology. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Reed, Penny; Bowser, Gayl

This guide defines assistive technology as specialized hardware and software equipment used by students with disabilities to increase their ability to participate in tasks of learning and daily living and function as independently as possible. Types of assistive technology are listed, and information resources about assistive technology are noted.…

Web-Based Testing: A Form-Based Template for Creating Multimedia Enhanced Tests.

ERIC Educational Resources Information Center

MacDougall, Glenn; Place, Craig; Currie, Duane

Acadia University (Nova Scotia) has completed year two of the Acadia Advantage initiative, which involved 1,500 students and 170 faculty using IBM notebook computers in the curriculum. By year 2000, all 4,000 students at Acadia University will have notebook computers and will be taking part in technology-enhanced courses. To assist faculty, the…

Basic Technology Competencies, Attitude towards Computer Assisted Education and Usage of Technologies in Turkish Lesson: A Correlation

ERIC Educational Resources Information Center

Özdemir, Serpil

2017-01-01

The present research was done to determine the basic technology competency of Turkish teachers, their attitude towards computer-assisted education, and their technology operation level in Turkish lessons, and to designate the relationship between them. 85 Turkish teachers studying in public schools in Bartin participated in the research. The…

Vision based assistive technology for people with dementia performing activities of daily living (ADLs): an overview

NASA Astrophysics Data System (ADS)

As'ari, M. A.; Sheikh, U. U.

2012-04-01

The rapid development of intelligent assistive technology for replacing a human caregiver in assisting people with dementia performing activities of daily living (ADLs) promises in the reduction of care cost especially in training and hiring human caregiver. The main problem however, is the various kinds of sensing agents used in such system and is dependent on the intent (types of ADLs) and environment where the activity is performed. In this paper on overview of the potential of computer vision based sensing agent in assistive system and how it can be generalized and be invariant to various kind of ADLs and environment. We find that there exists a gap from the existing vision based human action recognition method in designing such system due to cognitive and physical impairment of people with dementia.

Translations on USSR Science and Technology Physical Sciences and Technology No. 18

DTIC Science & Technology

1977-09-19

and Avetik Gukasyan discuss component arrangement alternatives. COPYRIGHT: Notice not available 8545 CSO: 1870 CYBERNETICS, COMPUTERS AND...1974. COPYRIGHT: Notice not available 8545 CSO: 1870 CYBERNETICS, COMPUTERS AND AUTOMATION TECHNOLOGY ’PROYEKC’ COMPUTER-ASSISTED DESIGN SYSTEM...throughout the world are struggling. The "Proyekt" system, produced in the Institute of Cybernetics, assists in automating the design and manufacture of

Strategic Computing Computer Vision: Taking Image Understanding To The Next Plateau

NASA Astrophysics Data System (ADS)

Simpson, R. L., Jr.

1987-06-01

The overall objective of the Strategic Computing (SC) Program of the Defense Advanced Research Projects Agency (DARPA) is to develop and demonstrate a new generation of machine intelligence technology which can form the basis for more capable military systems in the future and also maintain a position of world leadership for the US in computer technology. Begun in 1983, SC represents a focused research strategy for accelerating the evolution of new technology and its rapid prototyping in realistic military contexts. Among the very ambitious demonstration prototypes being developed within the SC Program are: 1) the Pilot's Associate which will aid the pilot in route planning, aerial target prioritization, evasion of missile threats, and aircraft emergency safety procedures during flight; 2) two battle management projects one for the for the Army, which is just getting started, called the AirLand Battle Management program (ALBM) which will use knowledge-based systems technology to assist in the generation and evaluation of tactical options and plans at the Corps level; 3) the other more established program for the Navy is the Fleet Command Center Battle Management Program (FCCBIVIP) at Pearl Harbor. The FCCBMP is employing knowledge-based systems and natural language technology in a evolutionary testbed situated in an operational command center to demonstrate and evaluate intelligent decision-aids which can assist in the evaluation of fleet readiness and explore alternatives during contingencies; and 4) the Autonomous Land Vehicle (ALV) which integrates in a major robotic testbed the technologies for dynamic image understanding, knowledge-based route planning with replanning during execution, hosted on new advanced parallel architectures. The goal of the Strategic Computing computer vision technology base (SCVision) is to develop generic technology that will enable the construction of complete, robust, high performance image understanding systems to support a wide range of DoD applications. Possible applications include autonomous vehicle navigation, photointerpretation, smart weapons, and robotic manipulation. This paper provides an overview of the technical and program management plans being used in evolving this critical national technology.

Improving computer usage for students with physical disabilities through a collaborative approach: a pilot study.

PubMed

Borgestig, Maria; Falkmer, Torbjörn; Hemmingsson, Helena

2013-11-01

The aim of this study was to evaluate the effect of an assistive technology (AT) intervention to improve the use of available computers as assistive technology in educational tasks for students with physical disabilities during an ongoing school year. Fifteen students (aged 12-18) with physical disabilities, included in mainstream classrooms in Sweden, and their teachers took part in the intervention. Pre-, post-, and follow-up data were collected with Goal Attainment Scaling (GAS), a computer usage diary, and with the Psychosocial Impact of Assistive Devices Scale (PIADS). Teachers' opinions of goal setting were collected at follow-up. The intervention improved the goal-related computer usage in educational tasks and teachers reported they would use goal setting again when appropriate. At baseline, students reported a positive impact from computer usage with no differences over time regarding the PIADS subscales independence, adaptability, or self-esteem. The AT intervention showed a positive effect on computer usage as AT in mainstream schools. Some additional support to teachers is recommended as not all students improved in all goal-related computer usage. A clinical implication is that students' computer usage can be improved and collaboratively established computer-based strategies can be carried out by teachers in mainstream schools.

Feasibility of school-based computer-assisted robotic gaming technology for upper limb rehabilitation of children with cerebral palsy.

PubMed

Preston, Nick; Weightman, Andrew; Gallagher, Justin; Holt, Raymond; Clarke, Michael; Mon-Williams, Mark; Levesley, Martin; Bhakta, Bipinchandra

2016-01-01

We investigated the feasibility of using computer-assisted arm rehabilitation (CAAR) computer games in schools. Outcomes were children's preference for single player or dual player mode, and changes in arm activity and kinematics. Nine boys and two girls with cerebral palsy (6-12 years, mean 9 years) played assistive technology computer games in single-user mode or with school friends in an AB-BA design. Preference was determined by recording the time spent playing each mode and by qualitative feedback. We used the ABILHAND-kids and Canadian Occupational Performance Measure to evaluate activity limitation, and a portable laptop-based device to capture arm kinematics. No difference was recorded between single-user and dual-user modes (median daily use 9.27 versus 11.2 min, p = 0.214). Children reported dual-user mode was preferable. There were no changes in activity limitation (ABILHAND-kids, p = 0.424; COPM, p = 0.484) but we found significant improvements in hand speed (p = 0.028), smoothness (p = 0.005) and accuracy (p = 0.007). School timetables prohibit extensive use of rehabilitation technology but there is potential for its short-term use to supplement a rehabilitation program. The restricted access to the rehabilitation games was sufficient to improve arm kinematics but not arm activity. Implications for Rehabilitation School premises and teaching staff present no obstacles to the installation of rehabilitation gaming technology. Twelve minutes per day is the average amount of time that the school time table permits children to use rehabilitation gaming equipment (without disruption to academic attendance). The use of rehabilitation gaming technology for an average of 12 minutes daily does not appear to benefit children's functional performance, but there are improvements in the kinematics of children's upper limb.

High Tech: A Place in Our Lives and in Our Schools.

ERIC Educational Resources Information Center

Roach, John V.

1986-01-01

Discusses various aspects of high technology: computers in cars, computer-assisted design and manufacturing, computers in telephones, video recorders, laser technology, home computers, job training, computer education, and the challenge to the technology teacher. (CT)

"A Technical Assistance Report" on Computer Technology Applications. Smithville School District, Smithville, Massachusetts.

ERIC Educational Resources Information Center

Merrimack Education Center, Chelmsford, MA.

This report of the Technical Assistance Study provided to the Smithville Public Schools by the Technology Lighthouse of the Merrimack Education Center offers information for use in planning computer technology applications over a 3-year period. It provides specific guidelines and criteria for planning and development, equipment considerations,…

Computer-Based Rehabilitation for Developing Speech and Language in Hearing-Impaired Children: A Systematic Review

ERIC Educational Resources Information Center

Simpson, Andrea; El-Refaie, Amr; Stephenson, Caitlin; Chen, Yi-Ping Phoebe; Deng, Dennis; Erickson, Shane; Tay, David; Morris, Meg E.; Doube, Wendy; Caelli, Terry

2015-01-01

The purpose of this systematic review was to examine whether online or computer-based technologies were effective in assisting the development of speech and language skills in children with hearing loss. Relevant studies of children with hearing loss were analysed with reference to (1) therapy outcomes, (2) factors affecting outcomes, and (3)…

Students' Motivation towards Computer Use in EFL Learning

ERIC Educational Resources Information Center

Genc, Gulten; Aydin, Selami

2010-01-01

It has been widely recognized that language instruction that integrates technology has become popular, and has had a tremendous impact on language learning process whereas learners are expected to be more motivated in a web-based Computer assisted language learning program, and improve their comprehensive language ability. Thus, the present paper…

Using a Touch-Based, Computer-Assisted Learning System to Promote Literacy and Math Skills for Low-Income Preschoolers

ERIC Educational Resources Information Center

McManis, Mark H.; McManis, Lilla Dale

2016-01-01

The use of touch-based technologies by young children to improve academic skills has seen growth outpacing empirical evidence of its effectiveness. Due to the educational challenges low-income children face, the stakes for providing instructional technology with demonstrated efficacy are high. The current work presents an empirical study of the…

Assistive Technology Developments in Puerto Rico.

ERIC Educational Resources Information Center

Lizama, Mauricio A.; Mendez, Hector L.

Recent efforts to develop Spanish-based adaptations for alternate computer input devices are considered, as are their implications for Hispanics with disabilities and for the development of language sensitive devices worldwide. Emphasis is placed on the particular need to develop low-cost high technology devices for Puerto Rico and Latin America…

On the Edge: Intelligent CALL in the 1990s.

ERIC Educational Resources Information Center

Underwood, John

1989-01-01

Examines the possibilities of developing computer-assisted language learning (CALL) based on the best of modern technology, arguing that artificial intelligence (AI) strategies will radically improve the kinds of exercises that can be performed. Recommends combining AI technology with other tools for delivering instruction, such as simulation and…

Workload measurement in a communication application operated through a P300-based brain-computer interface

NASA Astrophysics Data System (ADS)

Riccio, A.; Leotta, F.; Bianchi, L.; Aloise, F.; Zickler, C.; Hoogerwerf, E.-J.; Kübler, A.; Mattia, D.; Cincotti, F.

2011-04-01

Advancing the brain-computer interface (BCI) towards practical applications in technology-based assistive solutions for people with disabilities requires coping with problems of accessibility and usability to increase user acceptance and satisfaction. The main objective of this study was to introduce a usability-oriented approach in the assessment of BCI technology development by focusing on evaluation of the user's subjective workload and satisfaction. The secondary aim was to compare two applications for a P300-based BCI. Eight healthy subjects were asked to use an assistive technology solution which integrates the P300-based BCI with commercially available software under two conditions—visual stimuli needed to evoke the P300 response were either overlaid onto the application's graphical user interface or presented on a separate screen. The two conditions were compared for effectiveness (level of performance), efficiency (subjective workload measured by means of NASA-TXL) and satisfaction of the user. Although no significant difference in usability could be detected between the two conditions, the methodology proved to be an effective tool to highlight weaknesses in the technical solution.

(Computer) Vision without Sight

PubMed Central

Manduchi, Roberto; Coughlan, James

2012-01-01

Computer vision holds great promise for helping persons with blindness or visual impairments (VI) to interpret and explore the visual world. To this end, it is worthwhile to assess the situation critically by understanding the actual needs of the VI population and which of these needs might be addressed by computer vision. This article reviews the types of assistive technology application areas that have already been developed for VI, and the possible roles that computer vision can play in facilitating these applications. We discuss how appropriate user interfaces are designed to translate the output of computer vision algorithms into information that the user can quickly and safely act upon, and how system-level characteristics affect the overall usability of an assistive technology. Finally, we conclude by highlighting a few novel and intriguing areas of application of computer vision to assistive technology. PMID:22815563

Innovation in engineering education through computer assisted learning and virtual university model

NASA Astrophysics Data System (ADS)

Raicu, A.; Raicu, G.

2015-11-01

The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern techniques are the flexible learning courses, the production of learning demonstrators and testing. All the information from the virtual educational platform remain open space, communication between participants and continued after graduation, so we can talk about creating and maintaining a community of graduates, a partnership with them. Every European University must have a department which aims to provide computer assisted learning using knowledge creation through learning, capture and explication, sharing and collaborative communication, access, use and reuse and knowledge archiving.

Computer Assisted Language Learning. Routledge Studies in Computer Assisted Language Learning

ERIC Educational Resources Information Center

Pennington, Martha

2011-01-01

Computer-assisted language learning (CALL) is an approach to language teaching and learning in which computer technology is used as an aid to the presentation, reinforcement and assessment of material to be learned, usually including a substantial interactive element. This books provides an up-to date and comprehensive overview of…

Computers--Teaching, Technology, and Applications.

ERIC Educational Resources Information Center

Cocco, Anthony M.; And Others

1995-01-01

Includes "Managing Personality Types in the Computer Classroom" (Cocco); "External I/O Input/Output with a PC" (Fryda); "The Future of CAD/CAM Computer-Assisted Design/Computer-Assisted Manufacturing Software" (Fulton); and "Teaching Quality Assurance--A Laboratory Approach" (Wojslaw). (SK)

Educational Technology: Best Practices from America's Schools.

ERIC Educational Resources Information Center

Bozeman, William C.; Baumbach, Donna J.

This book begins with an overview of computer technology concepts, including computer system configurations, computer communications, and software. Instructional computer applications are then discussed; topics include computer-assisted instruction, computer-managed instruction, computer-enhanced instruction, LOGO, authoring programs, presentation…

CATTS (Computer Assisted Teacher Training System) Technology in Analyzing Observational Data from Public School Classrooms: A Study of Interactive Tactics and Decisions of Teachers.

ERIC Educational Resources Information Center

Lynch, William W.

Prompting of reading errors is a common pattern of teaching behavior occurring in reading groups. Teachers' tactics in responding to pupil errors during oral reading in public school classrooms were analyzed with the assistance of the technology of the Computer Assisted Teacher Training System (CATTS) to formulate hypotheses about teacher decision…

Application of virtual surgical planning with computer assisted design and manufacturing technology to cranio-maxillofacial surgery.

PubMed

Zhao, Linping; Patel, Pravin K; Cohen, Mimis

2012-07-01

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances

ERIC Educational Resources Information Center

Zou, Bin; Xing, Minjie; Wang, Yuping; Sun, Mingyu; Xiang, Catherine H.

2013-01-01

Computer-Assisted Foreign Language Teaching and Learning: Technological Advances highlights new research and an original framework that brings together foreign language teaching, experiments and testing practices that utilize the most recent and widely used e-learning resources. This comprehensive collection of research will offer linguistic…

FMS: The New Wave of Manufacturing Technology.

ERIC Educational Resources Information Center

Industrial Education, 1986

1986-01-01

Flexible manufacturing systems (FMS) are described as a marriage of all of the latest technologies--robotics, numerical control, CAD/CAM (computer-assisted design/computer-assisted manufacturing), etc.--into a cost-efficient, optimized production process yielding the greatest flexibility in making various parts. A typical curriculum to teach FMS…

Promise of new imaging technologies for assessing ovarian function.

PubMed

Singh, Jaswant; Adams, Gregg P; Pierson, Roger A

2003-10-15

Advancements in imaging technologies over the last two decades have ushered a quiet revolution in research approaches to the study of ovarian structure and function. The most significant changes in our understanding of the ovary have resulted from the use of ultrasonography which has enabled sequential analyses in live animals. Computer-assisted image analysis and mathematical modeling of the dynamic changes within the ovary has permitted exciting new avenues of research with readily quantifiable endpoints. Spectral, color-flow and power Doppler imaging now facilitate physiologic interpretations of vascular dynamics over time. Similarly, magnetic resonance imaging (MRI) is emerging as a research tool in ovarian imaging. New technologies, such as three-dimensional ultrasonography and MRI, ultrasound-based biomicroscopy and synchrotron-based techniques each have the potential to enhance our real-time picture of ovarian function to the near-cellular level. Collectively, information available in ultrasonography, MRI, computer-assisted image analysis and mathematical modeling heralds a new era in our understanding of the basic processes of female and male reproduction.

"Un"complicated Technologies and Erstwhile Aids: How PowerPoint, the Internet, and Political Cartoons Can Elicit Engagement and Challenge Thinking in New Ways

ERIC Educational Resources Information Center

Bickford, J. H., III

2010-01-01

This paper is based on three beliefs. First, technology can engage and challenge students' thinking. Second, technology can assist students in creating quality work. Finally, computer-generated student-work can be used as educational tools in productive ways that other student-work cannot. This article suggests new ways to use old technologies to…

Combining Brain–Computer Interfaces and Assistive Technologies: State-of-the-Art and Challenges

PubMed Central

Millán, J. d. R.; Rupp, R.; Müller-Putz, G. R.; Murray-Smith, R.; Giugliemma, C.; Tangermann, M.; Vidaurre, C.; Cincotti, F.; Kübler, A.; Leeb, R.; Neuper, C.; Müller, K.-R.; Mattia, D.

2010-01-01

In recent years, new research has brought the field of electroencephalogram (EEG)-based brain–computer interfacing (BCI) out of its infancy and into a phase of relative maturity through many demonstrated prototypes such as brain-controlled wheelchairs, keyboards, and computer games. With this proof-of-concept phase in the past, the time is now ripe to focus on the development of practical BCI technologies that can be brought out of the lab and into real-world applications. In particular, we focus on the prospect of improving the lives of countless disabled individuals through a combination of BCI technology with existing assistive technologies (AT). In pursuit of more practical BCIs for use outside of the lab, in this paper, we identify four application areas where disabled individuals could greatly benefit from advancements in BCI technology, namely, “Communication and Control”, “Motor Substitution”, “Entertainment”, and “Motor Recovery”. We review the current state of the art and possible future developments, while discussing the main research issues in these four areas. In particular, we expect the most progress in the development of technologies such as hybrid BCI architectures, user–machine adaptation algorithms, the exploitation of users’ mental states for BCI reliability and confidence measures, the incorporation of principles in human–computer interaction (HCI) to improve BCI usability, and the development of novel BCI technology including better EEG devices. PMID:20877434

RFID-Based Multidisciplinary Educational Platform to Improve the Engineering and Technology Curriculums

ERIC Educational Resources Information Center

Yelamarthi, Kumar

2012-01-01

Multidisciplinary projects involving electrical engineering (EE), mechanical engineering (ME), and computer engineering (CE) students are both exciting and difficult to conceptualize. Answering this challenge, this paper presents a multidisciplinary educational platform on radio frequency identification-based assistive devices. The combination of…

A Method for Selection of Appropriate Assistive Technology for Computer Access

ERIC Educational Resources Information Center

Jenko, Mojca

2010-01-01

Assistive technologies (ATs) for computer access enable people with disabilities to be included in the information society. Current methods for assessment and selection of the most appropriate AT for each individual are nonstandardized, lengthy, subjective, and require substantial clinical experience of a multidisciplinary team. This manuscript…

Working Together: Computers and People with Sensory Impairments.

ERIC Educational Resources Information Center

Washington Univ., Seattle.

This brief paper considers ways in which people with sensory impairments can benefit from the assistive technology available with computers. Assistive technology practitioners are urged not to focus on the disability, but on the individual's abilities and the tasks to be performed. Explanations of the major sensory disability areas precedes…

Teaching Pronunciation with Computer Assisted Pronunciation Instruction in a Technological University

ERIC Educational Resources Information Center

Liu, Sze-Chu; Hung, Po-Yi

2016-01-01

The purpose of this study is to evaluate the effectiveness of computer assisted pronunciation instruction in English pronunciation for students in vocational colleges and universities in Taiwan. The participants were fifty-one first-year undergraduate students from a technological university located in central Taiwan. The participants received an…

Brief Report: Methods for Collecting Sexual Behaviour Information from South African Adolescents--A Comparison of Paper versus Personal Digital Assistant Questionnaires

ERIC Educational Resources Information Center

Jaspan, Heather B.; Flisher, Alan J.; Myer, Landon; Mathews, Catherine; Seebregts, Chris; Berwick, Jessica R.; Wood, Robin; Bekker, Linda-Gail

2007-01-01

Reporting bias in adolescent behavioural research may be overcome with the use of personal digital assistants (PDA) or other computer based technologies. However, there is little insight into the use of these tools among adolescents in low resource settings. We compared self-administered paper questionnaires with PDA questionnaires to collect…

Computer Assisted Reading in German as a Foreign Language, Developing and Testing an NLP-Based Application

ERIC Educational Resources Information Center

Wood, Peter

2011-01-01

"QuickAssist," the program presented in this paper, uses natural language processing (NLP) technologies. It places a range of NLP tools at the disposal of learners, intended to enable them to independently read and comprehend a German text of their choice while they extend their vocabulary, learn about different uses of particular words,…

[Health technology assessment report: Computer-assisted Pap test for cervical cancer screening].

PubMed

Della Palma, Paolo; Moresco, Luca; Giorgi Rossi, Paolo

2012-01-01

HEALTH PROBLEM: Cervical cancer is a disease which is highly preventable by means of Pap test screening for the precancerous lesions, which can be easily treated. Furthermore, in the near future, control of the disease will be enhanced by the vaccination which prevents the infection of those human papillomavirus types that cause the vast majority of cervical cancers. The effectiveness of screening in drastically reducing cervical cancer incidence has been clearly demonstrated. The epidemiology of cervical cancer in industrialised countries is now determined mostly by the Pap test coverage of the female population and by the ability of health systems to assure appropriate follow up after an abnormal Pap test. Today there are two fully automated systems for computer-assisted Pap test: the BD FocalPoint and the Hologic Imager. Recently, the Hologic Integrated Imager, a semi-automated system, was launched. The two fully automated systems are composed of a central scanner, where the machine examines the cytologic slide, and of one or more review stations, where the cytologists analyze the slides previously centrally scanned. The softwares used by the two systems identify the fields of interest so that the cytologists can look only at those points, automatically pointed out by the review station. Furthermore, the FocalPoint system classifies the slides according to their level of risk of containing signs of relevant lesions. Those in the upper classes--about one fifth of the slides--are labelled as « further review », while those in the lower level of risk, i.e. slides that have such a low level of risk that they can be considered as negative with no human review, are labelled as « no further review ». The aim of computer-assisted Pap test is to reduce the time of slide examination and to increase productivity. Furthermore, the number of errors due to lack of attention may decrease. Both the systems can be applied to liquidbased cytology, while only the BD Focal Point can be used on conventional smears. Cytology screening has some critical points: there is a shortage of cytologists/cytotechnicians; the quality strongly depends on the experience and ability of the cytologist; there is a subjective component in the cytological diagnosis; in highly screened populations, the prevalence of lesions is very low and the activity of cytologists is very monotonous. On the other hand, a progressive shift to molecular screening using HPV-DNA test as primary screening test is very likely in the near future; cytology will be used as triage test, dramatically reducing the number of slides to process and increasing the prevalence of lesions in those Pap tests. In this Report we assume that the diagnostic accuracy of computer-assisted Pap test is equal to the accuracy of manual Pap test and, consequently, that screening using computer-assisted Pap test has the same efficacy in reducing cervical cancer incidence and mortality. Under this assumption, the effectiveness/ benefit/utility is the same for the two screening modes, i.e. the economic analysis will be a cost minimization study. Furthermore, the screening process is identical for the two modalities in all the phases except for slide interpretation. The cost minimization analysis will be limited to the only phase differing between the two modes, i.e. the study will be a differential cost analysis between a labour-intensive strategy (traditional Pap test) and a technology-intensive strategy (the computer-assisted Pap test). Briefly, the objectives of this HTA Report are: to determine the break even point of computer-assisted Pap test systems, i.e. the volume of slides processed per year at which putting in place a computer-assisted Pap test system becomes economically convenient; to quantify the cost per Pap test in different scenarios according to screening centre activity volume, productivity of cytologist, type of cytology (conventional smear or liquid-based, fully automated or semi-automated computer-assisted); to analyse the computer-assisted Pap test in the Italian context, through a survey of the centres using the technology, collecting data useful for the sensitivity analysis of the economic evaluation; to evaluate the acceptability of the technology in the screening services; to evaluate the organizational and financial impact of the computer-assisted Pap test in different scenarios; to illustrate the ideal organization to implement computer-assisted Pap test in terms of volume of activity, productivity, and human and technological resources. to produce this Report, the following process was adopted: application to the Ministry of health for a grant « Analysis of the impact of professional involvement in evidence generation for the HTA process »; within this project, the sub-project « Cost effectiveness evaluation of the computer-assisted Pap test in the Italian screening programmes » was financed; constitution of the Working Group, which included the project coordinator, the principal investigator, and the health economist; identification of the centres using the computer-assisted Pap test and which had published scientific reports on the subject; identification of the Consulting Committee (stakeholder), which included screening programmes managers, pathologists, economists, health policy-makers, citizen organizations, and manufacturers. Once the evaluation was concluded, a plenary meeting with Working Group and Consulting Committee was held. The working group drafted the final version of this Report, which took into account the comments received. the fully automated computer-assisted Pap test has an important financial and organizational impact on screening programmes. The assessment of this health technology reached the following conclusions: according to the survey results, after some distrust, cytologists accepted the use of the machine and appreciated the reduction in interpretation time and the reliability in identifying the fields of interest; from an economic point of view, the automated computer-assisted Pap test can be convenient only with conventional smears if the screening centre has a volume of more than 49,000 slides/year and the cytologist productivity increases about threefold. It must be highlighted that it is not sufficient to adopt the automated Pap test to reach such an increase in productivity; the laboratory must be organised or re-organised to optimise the use of the review stations and the person time. In the case of liquid-based cytology, the adoption of automated computer- assisted Pap test can only increase the costs. In fact, liquid-based cytology increases the cost of consumable materials but reduces the interpretation time, even in manual screening. Consequently, the reduction of human costs is smaller in the case of computer-assisted screening. Liquid-based cytology has other implications and advantages not linked to the use of computer-assisted Pap test that should be taken into account and are beyond the scope of this Report; given that the computer-assisted Pap test reduces human costs, it may be more advantageous where the cost of cytologists is higher; given the relatively small volume of activity of screening centres in Italy, computer-assisted Pap test may be reasonable for a network using only one central scanner and several remote review stations; the use of automated computer-assisted Pap test only for quality control in a single centre is not economically sustainable. In this case as well, several centres, for example at the regional level, may form a consortium to reach a reasonable number of slides to achieve the break even point. Regarding the use of a machine rather than human intelligence to interpret the slides, some ethical issues were initially raised, but both the scientific community and healthcare professionals have accepted this technology. The identification of fields of interest by the machine is highly reproducible, reducing subjectivity in the diagnostic process. The Hologic system always includes a check by the human eye, while the FocalPoint system identifies about one fifth of the slides as No Further Review. Several studies, some of which conducted in Italy, confirmed the reliability of this classification. There is still some resistance to accept the practice of No Further Review. A check of previous slides and clinical data can be useful to make the cytologist and the clinician more confident. Computer-assisted automated Pap test may be introduced only if there is a need to increase the volume of slides screened to cover the screening target population and sufficient human resources are not available. Switching a programme using conventional slides to automatic scanning can only lead to a reduction in costs if the volume of slides per year exceeds 49,000 slides/annum and cytologist productivity is optimised to more than 20,000 slides per year. At a productivity of 15,000 or fewer, the automated computer-assisted Pap test cannot be convenient. Switching from manual screening with conventional slides to automatic scanning with liquid-based cytology cannot generate any economic saving, but the system could increase output with a given number of staff. The transition from manual to computer assisted automated screening of liquid based cytology will not generate savings and the increase in productivity will be lower than that of the switch from manual/conventional to automated/conventional. The use of biologists or pathologists as cytologists is more costly than the use of cytoscreeners. Given that the automated computer-assisted Pap test reduces human resource costs, its adoption in a model using only biologists and pathologists for screening is more economically advantageous. (ABSTRACT TRUNCATED)

Computer Applications in the Design Process.

ERIC Educational Resources Information Center

Winchip, Susan

Computer Assisted Design (CAD) and Computer Assisted Manufacturing (CAM) are emerging technologies now being used in home economics and interior design applications. A microcomputer in a computer network system is capable of executing computer graphic functions such as three-dimensional modeling, as well as utilizing office automation packages to…

Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Insolia, Gerard

This document contains course outlines in computer-aided manufacturing developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The four units of the course cover the following: (1) introduction to computer-assisted design (CAD)/computer-assisted manufacturing (CAM); (2) CAM…

Assistive Technology as an artificial intelligence opportunity: Case study of letter-based, head movement driven communication.

PubMed

Miksztai-Réthey, Brigitta; Faragó, Kinga Bettina

2015-01-01

We studied an artificial intelligent assisted interaction between a computer and a human with severe speech and physical impairments (SSPI). In order to speed up AAC, we extended a former study of typing performance optimization using a framework that included head movement controlled assistive technology and an onscreen writing device. Quantitative and qualitative data were collected and analysed with mathematical methods, manual interpretation and semi-supervised machine video annotation. As the result of our research, in contrast to the former experiment's conclusions, we found that our participant had at least two different typing strategies. To maximize his communication efficiency, a more complex assistive tool is suggested, which takes the different methods into consideration.

Training Students as Technology Assistants.

ERIC Educational Resources Information Center

Onishi, Esther; Peto, Erica

1996-01-01

Describes a program where fifth and sixth graders are trained as school technology assistants. The childrens' duties include installation of software, making minor repairs, cleaning computer equipment, and assisting teachers and students. Outlines components of the program, lists forms the assistants use and skills they are taught, and provides…

Generational Learning Style Preferences Based on Computer-Based Healthcare Training

ERIC Educational Resources Information Center

Knight, Michaelle H.

2016-01-01

Purpose. The purpose of this mixed-method study was to determine the degree of perceived differences for auditory, visual and kinesthetic learning styles of Traditionalist, Baby Boomers, Generation X and Millennial generational healthcare workers participating in technology-assisted healthcare training. Methodology. This mixed-method research…

Training Early Childhood Educators: Computer Assisted Instruction Courses in Diagnostic Teaching. Final Report.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Computer-Assisted Instruction Lab.

The Computer Assisted Remedial Education (CARE) project developed two computer-assisted instructional (CAI) courses. The objective was to train educational personnel to use diagnostic teaching in working with preschool and primary grade children who exhibit learning problems. Emphasis was placed upon the use of new technology in providing…

Consumer and provider responses to a computerized version of the Illness Management and Recovery Program.

PubMed

Wright-Berryman, Jennifer L; Salyers, Michelle P; O'Halloran, James P; Kemp, Aaron S; Mueser, Kim T; Diazoni, Amanda J

2013-12-01

To explore mental health consumer and provider responses to a computerized version of the Illness Management and Recovery (IMR) program. Semistructured interviews were conducted to gather data from 6 providers and 12 consumers who participated in a computerized prototype of the IMR program. An inductive-consensus-based approach was used to analyze the interview responses. Qualitative analysis revealed consumers perceived various personal benefits and ease of use afforded by the new technology platform. Consumers also highly valued provider assistance and offered several suggestions to improve the program. The largest perceived barriers to future implementation were lack of computer skills and access to computers. Similarly, IMR providers commented on its ease and convenience, and the reduction of time intensive material preparation. Providers also expressed that the use of technology creates more options for the consumer to access treatment. The technology was acceptable, easy to use, and well-liked by consumers and providers. Clinician assistance with technology was viewed as helpful to get clients started with the program, as lack of computer skills and access to computers was a concern. Access to materials between sessions appears to be desired; however, given perceived barriers of computer skills and computer access, additional supports may be needed for consumers to achieve full benefits of a computerized version of IMR. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Development of a Computer-Assisted Cranial Nerve Simulation from the Visible Human Dataset

ERIC Educational Resources Information Center

Yeung, Jeffrey C.; Fung, Kevin; Wilson, Timothy D.

2011-01-01

Advancements in technology and personal computing have allowed for the development of novel teaching modalities such as online web-based modules. These modules are currently being incorporated into medical curricula and, in some paradigms, have been shown to be superior to classroom instruction. We believe that these modules have the potential of…

Development of a Diagnostic and Remedial Learning System Based on an Enhanced Concept--Effect Model

ERIC Educational Resources Information Center

Panjaburees, Patcharin; Triampo, Wannapong; Hwang, Gwo-Jen; Chuedoung, Meechoke; Triampo, Darapond

2013-01-01

With the rapid advances in computer technology during recent years, researchers have demonstrated the pivotal influences of computer-assisted diagnostic systems on student learning performance improvement. This research aims to develop a Diagnostic and Remedial Learning System (DRLS) for an algebra course in a Thai lower secondary school context…

Towards International and Interdisciplinary Research Collaboration for the Measurements of Quality of Life

ERIC Educational Resources Information Center

Mizohata, Sachie; Jadoul, Raynald

2013-01-01

This paper focuses on three main subjects: (1) monitoring quality of life (QoL) in old age; (2) international and interdisciplinary collaboration for QoL research; and (3) computer-based technology and infrastructure assisting (1) and (2). This type of computer-supported cooperative work in the social sciences has been termed eHumanities or…

Computers for Your Classroom: CAI and CMI.

ERIC Educational Resources Information Center

Thomas, David B.; Bozeman, William C.

1981-01-01

The availability of compact, low-cost computer systems provides a means of assisting classroom teachers in the performance of their duties. Computer-assisted instruction (CAI) and computer-managed instruction (CMI) are two applications of computer technology with which school administrators should become familiar. CAI is a teaching medium in which…

Receptivity toward Assistive Computer Technology by Non-Users Who Are Blind/Visually Impaired

ERIC Educational Resources Information Center

Leff, Lisa

2012-01-01

The non-use of assistive computer technology by some people who are legallyblind/visually-impaired was investigated to determine the reasons for lack of interest (Chiang, Cole, Gupta, Kaiser, & Starren, 2006; Williamson, Wright, Schauder & Bow, 2001). Social and psychological factors implicated in non-interest were determined by profiling…

CAD/CAM. High-Technology Training Module.

ERIC Educational Resources Information Center

Zuleger, Robert

This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

Collaborative Research Projects in the Technology-Enhanced Language Classroom: Preservice and In-Service Teachers Exchange Knowledge about Technology

ERIC Educational Resources Information Center

Schmid, Euline Cutrim; Hegelheimer, Volker

2014-01-01

This paper presents research findings of a longitudinal empirical case study that investigated an innovative Computer Assisted Language Learning (CALL) professional development program for pre-service English as Foreign Language (EFL) teachers. The conceptualization of the program was based on the assumption that pre-service language teachers…

A Different Approach to Have Science and Technology Student-Teachers Gain Varied Methods in Laboratory Applications: A Sample of Computer Assisted POE Application

ERIC Educational Resources Information Center

Saka, Arzu

2012-01-01

The purpose of this study is to develop a new approach and assess the application for the science and technology student-teachers to gain varied laboratory methods in science and technology teaching. It is also aimed to describe the computer-assisted POE application in the subject of "Photosynthesis-Light" developed in the context of…

Mathematics Learning Assisted Geogebra using Technologically Aligned Classroom (TAC) to Improve Communication Skills of Vocasional High School Student

NASA Astrophysics Data System (ADS)

Yuliardi, R.; Nurjanah

2017-09-01

The purpose of this study to analyze mathematical communication skill’s student to resolve geometry transformation problems through computer Assisted Geogebra using Technologically Aligned Classroom (TAC). The population in this study were students from one of Vocasional High School Student in West Java. Selection of sample by purposed random sampling, the experimental class is taught Technologically Aligned Classroom (TAC) with GeoGebra, while the control class is taught by conventional learning. This study was quasi-experimental with pretest and posttest control group design. Based on the results; (1) The enhancement of student mathematical communication skills through TAC was higher than the conventional learning; (2) based on gender, there were no differences of mathematical communication skilss student who exposed with TAC and conventional learning; (3) based on KAM test, there was significant enhancement of students’ communication skills among ability of high, middle, and low KAM. The differences occur between high KAM and middle KAM, and also between high KAM and low KAM. Based on this result, mathematics learning Assisted Geogebra using Technologically Aligned Classroom (TAC) can be applied in the process of Mathematics Learning in Vocasional High School.

Computer and cell phone access for individuals with mobility impairments: an overview and case studies.

PubMed

Burgstahler, Sheryl; Comden, Dan; Lee, Sang-Mook; Arnold, Anthony; Brown, Kayla

2011-01-01

Computers, telephones, and assistive technology hold promise for increasing the independence, productivity, and participation of individuals with disabilities in academic, employment, recreation, and other activities. However, to reach this goal, technology must be accessible to, available to, and usable by everyone. The authors of this article share computer and telephone access challenges faced by individuals with neurological and other impairments, assistive technology solutions, issues that impact product adoption and use, needs for new technologies, and recommendations for practitioners and researchers. They highlight the stories of three individuals with neurological/mobility impairments, the technology they have found useful to them, and their recommendations for future product development.

Technography and Design-Actuality Gap-Analysis of Internet Computer Technologies-Assisted Education: Western Expectations and Global Education

ERIC Educational Resources Information Center

Greenhalgh-Spencer, Heather; Jerbi, Moja

2017-01-01

In this paper, we provide a design-actuality gap-analysis of the internet infrastructure that exists in developing nations and nations in the global South with the deployed internet computer technologies (ICT)-assisted programs that are designed to use internet infrastructure to provide educational opportunities. Programs that specifically…

Computer Utilization in Industrial Arts/Technology Education. Curriculum Guide.

ERIC Educational Resources Information Center

Connecticut Industrial Arts Association.

This guide is intended to assist industrial arts/technology education teachers in helping students in grades K-12 understand the impact of computers and computer technology in the world. Discussed in the introductory sections are the ways in which computers have changed the face of business, industry, and education and training; the scope and…

Non-invasive brain-computer interface system: towards its application as assistive technology.

PubMed

Cincotti, Febo; Mattia, Donatella; Aloise, Fabio; Bufalari, Simona; Schalk, Gerwin; Oriolo, Giuseppe; Cherubini, Andrea; Marciani, Maria Grazia; Babiloni, Fabio

2008-04-15

The quality of life of people suffering from severe motor disabilities can benefit from the use of current assistive technology capable of ameliorating communication, house-environment management and mobility, according to the user's residual motor abilities. Brain-computer interfaces (BCIs) are systems that can translate brain activity into signals that control external devices. Thus they can represent the only technology for severely paralyzed patients to increase or maintain their communication and control options. Here we report on a pilot study in which a system was implemented and validated to allow disabled persons to improve or recover their mobility (directly or by emulation) and communication within the surrounding environment. The system is based on a software controller that offers to the user a communication interface that is matched with the individual's residual motor abilities. Patients (n=14) with severe motor disabilities due to progressive neurodegenerative disorders were trained to use the system prototype under a rehabilitation program carried out in a house-like furnished space. All users utilized regular assistive control options (e.g., microswitches or head trackers). In addition, four subjects learned to operate the system by means of a non-invasive EEG-based BCI. This system was controlled by the subjects' voluntary modulations of EEG sensorimotor rhythms recorded on the scalp; this skill was learnt even though the subjects have not had control over their limbs for a long time. We conclude that such a prototype system, which integrates several different assistive technologies including a BCI system, can potentially facilitate the translation from pre-clinical demonstrations to a clinical useful BCI.

Non invasive Brain-Computer Interface system: towards its application as assistive technology

PubMed Central

Cincotti, Febo; Mattia, Donatella; Aloise, Fabio; Bufalari, Simona; Schalk, Gerwin; Oriolo, Giuseppe; Cherubini, Andrea; Marciani, Maria Grazia; Babiloni, Fabio

2010-01-01

The quality of life of people suffering from severe motor disabilities can benefit from the use of current assistive technology capable of ameliorating communication, house-environment management and mobility, according to the user's residual motor abilities. Brain Computer Interfaces (BCIs) are systems that can translate brain activity into signals that control external devices. Thus they can represent the only technology for severely paralyzed patients to increase or maintain their communication and control options. Here we report on a pilot study in which a system was implemented and validated to allow disabled persons to improve or recover their mobility (directly or by emulation) and communication within the surrounding environment. The system is based on a software controller that offers to the user a communication interface that is matched with the individual's residual motor abilities. Patients (n=14) with severe motor disabilities due to progressive neurodegenerative disorders were trained to use the system prototype under a rehabilitation program carried out in a house-like furnished space. All users utilized regular assistive control options (e.g., microswitches or head trackers). In addition, four subjects learned to operate the system by means of a non-invasive EEG-based BCI. This system was controlled by the subjects' voluntary modulations of EEG sensorimotor rhythms recorded on the scalp; this skill was learnt even though the subjects have not had control over their limbs for a long time. We conclude that such a prototype system, which integrates several different assistive technologies including a BCI system, can potentially facilitate the translation from pre-clinical demonstrations to a clinical useful BCI. PMID:18394526

The Nature of Computer Assisted Learning.

ERIC Educational Resources Information Center

Whiting, John

Computer assisted learning (CAL) is an old technology which has generated much new interest. Computers can: reduce data to a directly comprehensible form; reduce administration; communicate worldwide and exchange, store, and retrieve data; and teach. The computer's limitation is in its dependence on the user's ability and perceptive nature.…

Computer assisted surgery in preoperative planning of acetabular fracture surgery: state of the art.

PubMed

Boudissa, Mehdi; Courvoisier, Aurélien; Chabanas, Matthieu; Tonetti, Jérôme

2018-01-01

The development of imaging modalities and computer technology provides a new approach in acetabular surgery. Areas covered: This review describes the role of computer-assisted surgery (CAS) in understanding of the fracture patterns, in the virtual preoperative planning of the surgery and in the use of custom-made plates in acetabular fractures with or without 3D printing technologies. A Pubmed internet research of the English literature of the last 20 years was carried out about studies concerning computer-assisted surgery in acetabular fractures. The several steps for CAS in acetabular fracture surgery are presented and commented by the main author regarding to his personal experience. Expert commentary: Computer-assisted surgery in acetabular fractures is still initial experiences with promising results. Patient-specific biomechanical models considering soft tissues should be developed to allow a more realistic planning.

Early assessment of the likely cost-effectiveness of a new technology: A Markov model with probabilistic sensitivity analysis of computer-assisted total knee replacement.

PubMed

Dong, Hengjin; Buxton, Martin

2006-01-01

The objective of this study is to apply a Markov model to compare cost-effectiveness of total knee replacement (TKR) using computer-assisted surgery (CAS) with that of TKR using a conventional manual method in the absence of formal clinical trial evidence. A structured search was carried out to identify evidence relating to the clinical outcome, cost, and effectiveness of TKR. Nine Markov states were identified based on the progress of the disease after TKR. Effectiveness was expressed by quality-adjusted life years (QALYs). The simulation was carried out initially for 120 cycles of a month each, starting with 1,000 TKRs. A discount rate of 3.5 percent was used for both cost and effectiveness in the incremental cost-effectiveness analysis. Then, a probabilistic sensitivity analysis was carried out using a Monte Carlo approach with 10,000 iterations. Computer-assisted TKR was a long-term cost-effective technology, but the QALYs gained were small. After the first 2 years, the incremental cost per QALY of computer-assisted TKR was dominant because of cheaper and more QALYs. The incremental cost-effectiveness ratio (ICER) was sensitive to the "effect of CAS," to the CAS extra cost, and to the utility of the state "Normal health after primary TKR," but it was not sensitive to utilities of other Markov states. Both probabilistic and deterministic analyses produced similar cumulative serious or minor complication rates and complex or simple revision rates. They also produced similar ICERs. Compared with conventional TKR, computer-assisted TKR is a cost-saving technology in the long-term and may offer small additional QALYs. The "effect of CAS" is to reduce revision rates and complications through more accurate and precise alignment, and although the conclusions from the model, even when allowing for a full probabilistic analysis of uncertainty, are clear, the "effect of CAS" on the rate of revisions awaits long-term clinical evidence.

Developing Computer-Assisted Instruction Multimedia For Educational Technology Course of Coastal Area Students

NASA Astrophysics Data System (ADS)

Idris, Husni; Nurhayati, Nurhayati; Satriani, Satriani

2018-05-01

This research aims to a) identify instructional software (interactive multimedia CDs) by developing Computer-Assisted Instruction (CAI) multimedia that is eligible to be used in the instruction of the Educational Technology course; b) analysis the role of instructional software (interactive multimedia CDs) on the Educational Technology course through the development of Computer-Assisted Instruction (CAI) multimedia to improve the quality of education and instructional activities. This is Research and Development (R&D). It employed the descriptive procedural model of development, which outlines the steps to be taken to develop a product, which is instructional multimedia. The number of subjects of the research trial or respondents for each stage was 20 people. To maintain development quality, an expert in materials outside the materials under study, an expert in materials who is also a Educational Technology lecturer, a small groupof 3 students, a medium-sized group of 10 students, and 20 students to participate in the field testing took part in this research. Then, data collection instruments were developed in two stages, namely: a) developing the instruments; and b) trying out instruments. Data on students’ responses were collected using questionnaires and analyzed using descriptive statistics with percentage and categorization techniques. Based on data analysis results, it is revealed that the Computer-Assisted Instruction (CAI) multimedia developed and tried out among students during the preliminary field testing falls into the “Good” category, with the aspects of instruction, materials, and media falling into the “Good” category. Subsequently, results of the main field testing among students also suggest that it falls into the “Good” category, with the aspects of instruction, materials, and media falling into the “Good” category. Similarly, results of the operational field testing among students also suggest that it falls into the “Good” category. Thus, it can be concluded that quality of the Computer-Assisted Instruction (CAI) multimedia developed in this research falls into the “Good” category viewed from the aspects of instruction, materials, and media. In other words, overall, the quality of this multimedia belongs to the “Good” category.

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... for the development of Statewide communications and training mechanisms involving computer-based communication technologies that directly facilitate interaction with the National Capacity Building and... section 205(a) of the Act, in developing electronic communications, training mechanisms and/or...

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... for the development of Statewide communications and training mechanisms involving computer-based communication technologies that directly facilitate interaction with the National Capacity Building and... section 205(a) of the Act, in developing electronic communications, training mechanisms and/or...

An intelligent multi-media human-computer dialogue system

NASA Technical Reports Server (NTRS)

Neal, J. G.; Bettinger, K. E.; Byoun, J. S.; Dobes, Z.; Thielman, C. Y.

1988-01-01

Sophisticated computer systems are being developed to assist in the human decision-making process for very complex tasks performed under stressful conditions. The human-computer interface is a critical factor in these systems. The human-computer interface should be simple and natural to use, require a minimal learning period, assist the user in accomplishing his task(s) with a minimum of distraction, present output in a form that best conveys information to the user, and reduce cognitive load for the user. In pursuit of this ideal, the Intelligent Multi-Media Interfaces project is devoted to the development of interface technology that integrates speech, natural language text, graphics, and pointing gestures for human-computer dialogues. The objective of the project is to develop interface technology that uses the media/modalities intelligently in a flexible, context-sensitive, and highly integrated manner modelled after the manner in which humans converse in simultaneous coordinated multiple modalities. As part of the project, a knowledge-based interface system, called CUBRICON (CUBRC Intelligent CONversationalist) is being developed as a research prototype. The application domain being used to drive the research is that of military tactical air control.

Use of ICT in School: A Comparison between Students with and without Physical Disabilities

ERIC Educational Resources Information Center

Lidstrom, Helene; Granlund, Mats; Hemmingsson, Helena

2012-01-01

The aim of this study was to determine the information and communication technologies use in school activities of two groups of students with physical disabilities, comprised of those who did and those who did not use a computer-based assistive technology device (ATD) and to make a comparison with students from the general population. In addition,…

iPads in the Second Language Classroom: An Examination of iPad Use by Teachers through TPACK and Teacher Perception Lenses

ERIC Educational Resources Information Center

Sharp, Steven Kary

2017-01-01

Research indicates a need for teacher education programs which include embedded computer assisted language learning (CALL) to support teachers' technological pedagogical and content knowledge (TPACK) of how to employ technology in classroom settings. Researchers also indicate a need to better understand the knowledge-base of language teacher…

Post-Coma Persons with Motor and Communication/Consciousness Impairments Choose among Environmental Stimuli and Request Stimulus Repetitions via Assistive Technology

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Colonna, Fabio; Navarro, Jorge; Lanzilotti, Crocifissa; Oliva, Doretta; Megna, Gianfranco

2010-01-01

This study assessed whether a program based on microswitch and computer technology would enable three post-coma participants (adults) with motor and communication/consciousness impairments to choose among environmental stimuli and request their repetition whenever they so desired. Within each session, 16 stimuli (12 preferred and 4 non-preferred)…

Assessing the Effectiveness of Web-Based Tutorials Using Pre-and Post-Test Measurements

ERIC Educational Resources Information Center

Guy, Retta Sweat; Lownes-Jackson, Millicent

2012-01-01

Computer technology in general and the Internet in particular have facilitated as well as motivated the development of Web-based tutorials (MacKinnon & Williams, 2006). The current research study describes a pedagogical approach that exploits the use of self-paced, Web-based tutorials for assisting students with reviewing grammar and mechanics…

An Object-Oriented Architecture for a Web-Based CAI System.

ERIC Educational Resources Information Center

Nakabayashi, Kiyoshi; Hoshide, Takahide; Seshimo, Hitoshi; Fukuhara, Yoshimi

This paper describes the design and implementation of an object-oriented World Wide Web-based CAI (Computer-Assisted Instruction) system. The goal of the design is to provide a flexible CAI/ITS (Intelligent Tutoring System) framework with full extendibility and reusability, as well as to exploit Web-based software technologies such as JAVA, ASP (a…

The Effect of Web-Based Portfolio Use on Academic Achievement and Retention

ERIC Educational Resources Information Center

Guzeller, Cem Oktay

2012-01-01

The web-based portfolio emerged as a result of the influence of technological developments on educational practices. In this study, the effect of the web-based portfolio building process on academic achievement and retention is explored. For this purpose, a study platform known as a computer-assisted personal development portfolio was designed for…

Computer-Assisted Search Of Large Textual Data Bases

NASA Technical Reports Server (NTRS)

Driscoll, James R.

1995-01-01

"QA" denotes high-speed computer system for searching diverse collections of documents including (but not limited to) technical reference manuals, legal documents, medical documents, news releases, and patents. Incorporates previously available and emerging information-retrieval technology to help user intelligently and rapidly locate information found in large textual data bases. Technology includes provision for inquiries in natural language; statistical ranking of retrieved information; artificial-intelligence implementation of semantics, in which "surface level" knowledge found in text used to improve ranking of retrieved information; and relevance feedback, in which user's judgements of relevance of some retrieved documents used automatically to modify search for further information.

Web-Based Architecture to Enable Compute-Intensive CAD Tools and Multi-user Synchronization in Teleradiology

NASA Astrophysics Data System (ADS)

Mehta, Neville; Kompalli, Suryaprakash; Chaudhary, Vipin

Teleradiology is the electronic transmission of radiological patient images, such as x-rays, CT, or MR across multiple locations. The goal could be interpretation, consultation, or medical records keeping. Information technology solutions have enabled electronic records and their associated benefits are evident in health care today. However, salient aspects of collaborative interfaces, and computer assisted diagnostic (CAD) tools are yet to be integrated into workflow designs. The Computer Assisted Diagnostics and Interventions (CADI) group at the University at Buffalo has developed an architecture that facilitates web-enabled use of CAD tools, along with the novel concept of synchronized collaboration. The architecture can support multiple teleradiology applications and case studies are presented here.

Pruning a decision tree for selecting computer-related assistive devices for people with disabilities.

PubMed

Chi, Chia-Fen; Tseng, Li-Kai; Jang, Yuh

2012-07-01

Many disabled individuals lack extensive knowledge about assistive technology, which could help them use computers. In 1997, Denis Anson developed a decision tree of 49 evaluative questions designed to evaluate the functional capabilities of the disabled user and choose an appropriate combination of assistive devices, from a selection of 26, that enable the individual to use a computer. In general, occupational therapists guide the disabled users through this process. They often have to go over repetitive questions in order to find an appropriate device. A disabled user may require an alphanumeric entry device, a pointing device, an output device, a performance enhancement device, or some combination of these. Therefore, the current research eliminates redundant questions and divides Anson's decision tree into multiple independent subtrees to meet the actual demand of computer users with disabilities. The modified decision tree was tested by six disabled users to prove it can determine a complete set of assistive devices with a smaller number of evaluative questions. The means to insert new categories of computer-related assistive devices was included to ensure the decision tree can be expanded and updated. The current decision tree can help the disabled users and assistive technology practitioners to find appropriate computer-related assistive devices that meet with clients' individual needs in an efficient manner.

Assistive technology applied to education of students with visual impairment.

PubMed

Alves, Cássia Cristiane de Freitas; Monteiro, Gelse Beatriz Martins; Rabello, Suzana; Gasparetto, Maria Elisabete Rodrigues Freire; de Carvalho, Keila Monteiro

2009-08-01

Verify the application of assistive technology, especially information technology in the education of blind and low-vision students from the perceptions of their teachers. Descriptive survey study in public schools in three municipalities of the state of São Paulo, Brazil. The sample comprised 134 teachers. According to the teachers' opinions, there are differences in the specificities and applicability of assistive technology for blind and low-vision students, for whom specific computer programs are important. Information technology enhances reading and writing skills, as well as communication with the world on an equal basis, thereby improving quality of life and facilitating the learning process. The main reason for not using information technology is the lack of planning courses. The main requirements for the use of information technology in schools are enough computers for all students, advisers to help teachers, and pedagogical support. Assistive technology is applied to education of students with visual impairment; however, teachers indicate the need for infrastructure and pedagogical support. Information technology is an important tool in the inclusion process and can promote independence and autonomy of students with visual impairment.

Engineering Technology Education Bibliography, 1990.

ERIC Educational Resources Information Center

Dyrud, Marilyn A.

1991-01-01

Lists over 340 materials published in 1990 related to engineering technology education and grouped under the following headings: administration; architectural; computer-assisted design/management (CAD/CAM); civil; computers; curriculum; electrical/electronics; industrial; industry/government/employers; instructional technology; laboratories;…

Adult Literacy Learning and Computer Technology: Features of Effective Computer-Assisted Learning Systems.

ERIC Educational Resources Information Center

Fahy, Patrick J.

Computer-assisted learning (CAL) can be used for adults functioning at any academic or grade level. In adult basic education (ABE), CAL can promote greater learning effectiveness and faster progress, concurrent learning and experience with computer literacy skills, privacy, and motivation. Adults who face barriers (financial, geographic, personal,…

BNCI systems as a potential assistive technology: ethical issues and participatory research in the BrainAble project.

PubMed

Carmichael, Clare; Carmichael, Patrick

2014-01-01

This paper highlights aspects related to current research and thinking about ethical issues in relation to Brain Computer Interface (BCI) and Brain-Neuronal Computer Interfaces (BNCI) research through the experience of one particular project, BrainAble, which is exploring and developing the potential of these technologies to enable people with complex disabilities to control computers. It describes how ethical practice has been developed both within the multidisciplinary research team and with participants. The paper presents findings in which participants shared their views of the project prototypes, of the potential of BCI/BNCI systems as an assistive technology, and of their other possible applications. This draws attention to the importance of ethical practice in projects where high expectations of technologies, and representations of "ideal types" of disabled users may reinforce stereotypes or drown out participant "voices". Ethical frameworks for research and development in emergent areas such as BCI/BNCI systems should be based on broad notions of a "duty of care" while being sufficiently flexible that researchers can adapt project procedures according to participant needs. They need to be frequently revisited, not only in the light of experience, but also to ensure they reflect new research findings and ever more complex and powerful technologies.

ERMHAN: A Context-Aware Service Platform to Support Continuous Care Networks for Home-Based Assistance

PubMed Central

Paganelli, Federica; Spinicci, Emilio; Giuli, Dino

2008-01-01

Continuous care models for chronic diseases pose several technology-oriented challenges for home-based continuous care, where assistance services rely on a close collaboration among different stakeholders such as health operators, patient relatives, and social community members. Here we describe Emilia Romagna Mobile Health Assistance Network (ERMHAN) a multichannel context-aware service platform designed to support care networks in cooperating and sharing information with the goal of improving patient quality of life. In order to meet extensibility and flexibility requirements, this platform has been developed through ontology-based context-aware computing and a service oriented approach. We also provide some preliminary results of performance analysis and user survey activity. PMID:18695739

Computers, Technology, and Disability. [Update.

ERIC Educational Resources Information Center

American Council on Education, Washington, DC. HEATH Resource Center.

This paper describes programs and resources that focus on access of postsecondary students with disabilities to computers and other forms of technology. Increased access to technological devices and services is provided to students with disabilities under the Technology-Related Assistance for Individuals with Disabilities Act (Tech Act). Section…

Teaching Machines, Programming, Computers, and Instructional Technology: The Roots of Performance Technology.

ERIC Educational Resources Information Center

Deutsch, William

1992-01-01

Reviews the history of the development of the field of performance technology. Highlights include early teaching machines, instructional technology, learning theory, programed instruction, the systems approach, needs assessment, branching versus linear program formats, programing languages, and computer-assisted instruction. (LRW)

Development and evaluation of a hand tracker using depth images captured from an overhead perspective.

PubMed

Czarnuch, Stephen; Mihailidis, Alex

2015-03-27

We present the development and evaluation of a robust hand tracker based on single overhead depth images for use in the COACH, an assistive technology for people with dementia. The new hand tracker was designed to overcome limitations experienced by the COACH in previous clinical trials. We train a random decision forest classifier using ∼5000 manually labeled, unbalanced, training images. Hand positions from the classifier are translated into task actions based on proximity to environmental objects. Tracker performance is evaluated using a large set of ∼24 000 manually labeled images captured from 41 participants in a fully-functional washroom, and compared to the system's previous colour-based hand tracker. Precision and recall were 0.994 and 0.938 for the depth tracker compared to 0.981 and 0.822 for the colour tracker with the current data, and 0.989 and 0.466 in the previous study. The improved tracking performance supports integration of the depth-based tracker into the COACH toward unsupervised, real-world trials. Implications for Rehabilitation The COACH is an intelligent assistive technology that can enable people with cognitive disabilities to stay at home longer, supporting the concept of aging-in-place. Automated prompting systems, a type of intelligent assistive technology, can help to support the independent completion of activities of daily living, increasing the independence of people with cognitive disabilities while reducing the burden of care experienced by caregivers. Robust motion tracking using depth imaging supports the development of intelligent assistive technologies like the COACH. Robust motion tracking also has application to other forms of assistive technologies including gaming, human-computer interaction and automated assessments.

Methodological approaches of health technology assessment.

PubMed

Goodman, C S; Ahn, R

1999-12-01

In this era of evolving health care systems throughout the world, technology remains the substance of health care. Medical informatics comprises a growing contribution to the technologies used in the delivery and management of health care. Diverse, evolving technologies include artificial neural networks, computer-assisted surgery, computer-based patient records, hospital information systems, and more. Decision-makers increasingly demand well-founded information to determine whether or how to develop these technologies, allow them on the market, acquire them, use them, pay for their use, and more. The development and wider use of health technology assessment (HTA) reflects this demand. While HTA offers systematic, well-founded approaches for determining the value of medical informatics technologies, HTA must continue to adapt and refine its methods in response to these evolving technologies. This paper provides a basic overview of HTA principles and methods.

[Mobile computing in anaesthesiology and intensive care medicine. The practical relevance of portable digital assistants].

PubMed

Pazhur, R J; Kutter, B; Georgieff, M; Schraag, S

2003-06-01

Portable digital assistants (PDAs) may be of value to the anaesthesiologist as development in medical care is moving towards "bedside computing". Many different portable computers are currently available and it is now possible for the physician to carry a mobile computer with him all the time. It is data base, reference book, patient tracking help, date planner, computer, book, magazine, calculator and much more in one mobile device. With the help of a PDA, information that is required for our work may be available at all times and everywhere at the point of care within seconds. In this overview the possibilities for the use of PDAs in anaesthesia and intensive care medicine are discussed. Developments in other countries, possibilities in use but also problems such as data security and network technology are evaluated.

Youth with cerebral palsy with differing upper limb abilities: how do they access computers?

PubMed

Davies, T Claire; Chau, Tom; Fehlings, Darcy L; Ameratunga, Shanthi; Stott, N Susan

2010-12-01

To identify the current level of awareness of different computer access technologies and the choices made regarding mode of access by youth with cerebral palsy (CP) and their families. Survey. Two tertiary-level rehabilitation centers in New Zealand and Canada. Youth (N=60) with CP, Manual Ability Classification Scale (MACS) levels I to V, age 13 to 25 years. Not applicable. Questionnaire. Fifty (83%) of the 60 youth were aware of at least 1 available assistive technology (AT), such as touch screens and joysticks. However, only 34 youth (57%) were familiar with the accessibility options currently available in the most common operating systems. Thirty-three (94%) of 35 youth who were MACS I and II used a standard mouse and keyboard, while few chose to use assistive technology or accessibility options. In contrast, 10 (40%) of 25 youth who were MACS III to V used a variety of assistive technologies such as touch screens, joysticks, trackballs, and scanning technologies. This group also had the highest use of accessibility options, although only 15 (60%) of the 25 were aware of them. Most youth with CP were aware of, and used, assistive technologies to enhance their computer access but were less knowledgeable about accessibility options. Accessibility options allow users to modify their own computer interface and can thus enhance computer access for youth with CP. Clinicians should be knowledgeable enough to give informed advice in this area of computer access, thus ensuring that all youth with CP can benefit from both AT and accessibility options, as required. Copyright © 2010 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

The Human Factors and Ergonomics of P300-Based Brain-Computer Interfaces

PubMed Central

Powers, J. Clark; Bieliaieva, Kateryna; Wu, Shuohao; Nam, Chang S.

2015-01-01

Individuals with severe neuromuscular impairments face many challenges in communication and manipulation of the environment. Brain-computer interfaces (BCIs) show promise in presenting real-world applications that can provide such individuals with the means to interact with the world using only brain waves. Although there has been a growing body of research in recent years, much relates only to technology, and not to technology in use—i.e., real-world assistive technology employed by users. This review examined the literature to highlight studies that implicate the human factors and ergonomics (HFE) of P300-based BCIs. We assessed 21 studies on three topics to speak directly to improving the HFE of these systems: (1) alternative signal evocation methods within the oddball paradigm; (2) environmental interventions to improve user performance and satisfaction within the constraints of current BCI systems; and (3) measures and methods of measuring user acceptance. We found that HFE is central to the performance of P300-based BCI systems, although researchers do not often make explicit this connection. Incorporation of measures of user acceptance and rigorous usability evaluations, increased engagement of disabled users as test participants, and greater realism in testing will help progress the advancement of P300-based BCI systems in assistive applications. PMID:26266424

QuickAssist: Reading and Learning Vocabulary Independently with the Help of CALL and NLP Technologies

ERIC Educational Resources Information Center

Wood, Peter

2011-01-01

Independent learning is a buzz word that is often used in connection with computer technologies applied to the area of foreign language instruction. This chapter takes a critical look at some of the stereotypes that exist with regard to computer-assisted language learning (CALL) as a money saver and an easy way to create an "independent"…

Computer Vision Assisted Virtual Reality Calibration

NASA Technical Reports Server (NTRS)

Kim, W.

1999-01-01

A computer vision assisted semi-automatic virtual reality (VR) calibration technology has been developed that can accurately match a virtual environment of graphically simulated three-dimensional (3-D) models to the video images of the real task environment.

Integrating Computer-Assisted Language Learning in Saudi Schools: A Change Model

ERIC Educational Resources Information Center

Alresheed, Saleh; Leask, Marilyn; Raiker, Andrea

2015-01-01

Computer-assisted language learning (CALL) technology and pedagogy have gained recognition globally for their success in supporting second language acquisition (SLA). In Saudi Arabia, the government aims to provide most educational institutions with computers and networking for integrating CALL into classrooms. However, the recognition of CALL's…

Computers in Post-Secondary Developmental Education and Learning Assistance.

ERIC Educational Resources Information Center

Christ, Frank L.; McLaughlin, Richard C.

This update on computer technology--as it affects learning assistance directors and developmental education personnel--begins by reporting on new developments and changes that have taken place during the past two years in five areas: (1) hardware (microcomputer systems, low cost PC clones, combination Apple/PC machines, lab computer controllers…

Tool Mediation in Focus on Form Activities: Case Studies in a Grammar-Exploring Environment

ERIC Educational Resources Information Center

Karlstrom, Petter; Cerratto-Pargman, Teresa; Lindstrom, Henrik; Knutsson, Ola

2007-01-01

We present two case studies of two different pedagogical tasks in a Computer Assisted Language Learning environment called Grim. The main design principle in Grim is to support "Focus on Form" in second language pedagogy. Grim contains several language technology-based features for exploring linguistic forms (static, rule-based and statistical),…

75 FR 26791 - Solicitation for a Cooperative Agreement-Evaluation of Technical Assistance for Evidence-Based...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... opportunity to meet with NIC project staff and ask questions about the project and the application procedures. Attendance at the conference is optional. Provisions will be made using WebEx technology (telephone and computer-based conferencing). The WebEx session requires applicants to have access to a telephone and...

A Computer-Assisted Approach for Conducting Information Technology Applied Instructions

ERIC Educational Resources Information Center

Chu, Hui-Chun; Hwang, Gwo-Jen; Tsai, Pei Jin; Yang, Tzu-Chi

2009-01-01

The growing popularity of computer and network technologies has attracted researchers to investigate the strategies and the effects of information technology applied instructions. Previous research has not only demonstrated the benefits of applying information technologies to the learning process, but has also revealed the difficulty of applying…

Web-based training: a new paradigm in computer-assisted instruction in medicine.

PubMed

Haag, M; Maylein, L; Leven, F J; Tönshoff, B; Haux, R

1999-01-01

Computer-assisted instruction (CAI) programs based on internet technologies, especially on the world wide web (WWW), provide new opportunities in medical education. The aim of this paper is to examine different aspects of such programs, which we call 'web-based training (WBT) programs', and to differentiate them from conventional CAI programs. First, we will distinguish five different interaction types: presentation; browsing; tutorial dialogue; drill and practice; and simulation. In contrast to conventional CAI, there are four architectural types of WBT programs: client-based; remote data and knowledge; distributed teaching; and server-based. We will discuss the implications of the different architectures for developing WBT software. WBT programs have to meet other requirements than conventional CAI programs. The most important tools and programming languages for developing WBT programs will be listed and assigned to the architecture types. For the future, we expect a trend from conventional CAI towards WBT programs.

Design and methodological considerations of an effectiveness trial of a computer-assisted intervention: an example from the NIDA Clinical Trials Network.

PubMed

Campbell, Aimee N C; Nunes, Edward V; Miele, Gloria M; Matthews, Abigail; Polsky, Daniel; Ghitza, Udi E; Turrigiano, Eva; Bailey, Genie L; VanVeldhuisen, Paul; Chapdelaine, Rita; Froias, Autumn; Stitzer, Maxine L; Carroll, Kathleen M; Winhusen, Theresa; Clingerman, Sara; Perez, Livangelie; McClure, Erin; Goldman, Bruce; Crowell, A Rebecca

2012-03-01

Computer-assisted interventions hold the promise of minimizing two problems that are ubiquitous in substance abuse treatment: the lack of ready access to treatment and the challenges to providing empirically-supported treatments. Reviews of research on computer-assisted treatments for mental health and substance abuse report promising findings, but study quality and methodological limitations remain an issue. In addition, relatively few computer-assisted treatments have been tested among illicit substance users. This manuscript describes the methodological considerations of a multi-site effectiveness trial conducted within the National Institute on Drug Abuse's (NIDA's) National Drug Abuse Treatment Clinical Trials Network (CTN). The study is evaluating a web-based version of the Community Reinforcement Approach, in addition to prize-based contingency management, among 500 participants enrolled in 10 outpatient substance abuse treatment programs. Several potential effectiveness trial designs were considered and the rationale for the choice of design in this study is described. The study uses a randomized controlled design (with independent treatment arm allocation), intention-to-treat primary outcome analysis, biological markers for the primary outcome of abstinence, long-term follow-up assessments, precise measurement of intervention dose, and a cost-effectiveness analysis. Input from community providers during protocol development highlighted potential concerns and helped to address issues of practicality and feasibility. Collaboration between providers and investigators supports the utility of infrastructures that enhance research partnerships to facilitate effectiveness trials and dissemination of promising, technologically innovative treatments. Outcomes from this study will further the empirical knowledge base on the effectiveness and cost-effectiveness of computer-assisted treatment in clinical treatment settings. Copyright © 2011 Elsevier Inc. All rights reserved.

Design and Methodological Considerations of an Effectiveness Trial of a Computer-assisted Intervention: An Example from the NIDA Clinical Trials Network

PubMed Central

Campbell, Aimee N. C.; Nunes, Edward V.; Miele, Gloria M.; Matthews, Abigail; Polsky, Daniel; Ghitza, Udi E.; Turrigiano, Eva; Bailey, Genie L.; VanVeldhuisen, Paul; Chapdelaine, Rita; Froias, Autumn; Stitzer, Maxine L.; Carroll, Kathleen M.; Winhusen, Theresa; Clingerman, Sara; Perez, Livangelie; McClure, Erin; Goldman, Bruce; Crowell, A. Rebecca

2011-01-01

Computer-assisted interventions hold the promise of minimizing two problems that are ubiquitous in substance abuse treatment: the lack of ready access to treatment and the challenges to providing empirically-supported treatments. Reviews of research on computer-assisted treatments for mental health and substance abuse report promising findings, but study quality and methodological limitations remain an issue. In addition, relatively few computer-assisted treatments have been tested among illicit substance users. This manuscript describes the methodological considerations of a multi-site effectiveness trial conducted within the National Institute on Drug Abuse's (NIDA's) National Drug Abuse Treatment Clinical Trials Network (CTN). The study is evaluating a web-based version of the Community Reinforcement Approach, in addition to prize-based contingency management, among 500 participants enrolled in 10 outpatient substance abuse treatment programs. Several potential effectiveness trial designs were considered and the rationale for the choice of design in this study is described. The study uses a randomized controlled design (with independent treatment arm allocation), intention-to-treat primary outcome analysis, biological markers for the primary outcome of abstinence, long-term follow-up assessments, precise measurement of intervention dose, and a cost-effectiveness analysis. Input from community providers during protocol development highlighted potential concerns and helped to address issues of practicality and feasibility. Collaboration between providers and investigators supports the utility of infrastructures that enhance research partnerships to facilitate effectiveness trials and dissemination of promising, technologically innovative treatments. Outcomes from this study will further the empirical knowledge base on the effectiveness and cost-effectiveness of computer-assisted treatment in clinical treatment settings. PMID:22085803

Wearable computer technology for dismounted applications

NASA Astrophysics Data System (ADS)

Daniels, Reginald

2010-04-01

Small computing devices which rival the compact size of traditional personal digital assistants (PDA) have recently established a market niche. These computing devices are small enough to be considered unobtrusive for humans to wear. The computing devices are also powerful enough to run full multi-tasking general purpose operating systems. This paper will explore the wearable computer information system for dismounted applications recently fielded for ground-based US Air Force use. The environments that the information systems are used in will be reviewed, as well as a description of the net-centric, ground-based warrior. The paper will conclude with a discussion regarding the importance of intuitive, usable, and unobtrusive operator interfaces for dismounted operators.

Utilization of internet technology by low-income adults: the role of health literacy, health numeracy, and computer assistance.

PubMed

Jensen, Jakob D; King, Andy J; Davis, LaShara A; Guntzviller, Lisa M

2010-09-01

To examine whether low-income adults' utilization of Internet technology is predicted or mediated by health literacy, health numeracy, and computer assistance. Low-income adults (N = 131) from the midwestern United States were surveyed about their technology access and use. Individuals with low health literacy skills were less likely to use Internet technology (e.g., email, search engines, and online health information seeking), and those with low health numeracy skills were less likely to have access to Internet technology (e.g., computers and cell phones). Consistent with past research, males, older participants, and those with less education were less likely to search for health information online. The relationship between age and online health information seeking was mediated by participant literacy. The present study suggests that significant advances in technology access and use could be sparked by developing technology interfaces that are accessible to individuals with limited literacy skills.

Barriers to the Use of Computer Assistive Technology among Students with Visual Impairment in Ghana: The Case of Akropong School for the Blind

ERIC Educational Resources Information Center

Ampratwum, Joseph; Offei, Yaw Nyadu; Ntoaduro, Afua

2016-01-01

The study aimed at exploring barriers to the use of computer assistive technology among students with visual impairment at Akropong School for the Blind. A case study design was adopted and the purposive sampling technique used to select 35 participants for the study. The researchers gathered qualitative data using an in-depth interview guide to…

Application of Computer-Assisted Design and Manufacturing-Fabricated Artificial Bone in the Reconstruction of Craniofacial Bone Defects.

PubMed

Liang, Weiqiang; Yao, Yuanyuan; Huang, Zixian; Chen, Yuhong; Ji, Chenyang; Zhang, Jinming

2016-07-01

The purpose of this study was to evaluate the clinical application of individual craniofacial bone fabrications using computer-assisted design (CAD)-computer-assisted manufacturing technology for the reconstruction of craniofacial bone defects. A total of 8 patients diagnosed with craniofacial bone defects were enrolled in this study between May 2007 and August 2010. After computed tomography scans were obtained, the patients were fitted with artificial bone that was created using CAD software, rapid prototyping technology, and epoxy-methyl acrylate resin and hydroxyapatite materials. The fabrication was fixed to the defect area with titanium screws, and soft tissue defects were repaired if necessary. The fabrications were precisely fixed to the defect areas, and all wounds healed well without any serious complications except for 1 case with intraoral incision dehiscence, which required further treatment. Postoperative curative effects were retrospectively observed after 6 to 48 months, acceptable anatomic and cosmetic outcomes were obtained, and no rejections or other complications occurred. The use of CAD-computer-assisted manufacturing technology-assisted epoxy-methyl acrylate resin and hydroxyapatite composite artificial bone to treat patients with craniofacial bone defects could enable the precise reconstruction of these defects and obtain good anatomic and cosmetic outcomes. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Microcomputer-Based Intelligent Tutoring Systems: An Assessment.

ERIC Educational Resources Information Center

Schaffer, John William

Computer-assisted instruction, while familiar to most teachers, has failed to become an effective self-motivating instructional tool. Developments in artificial intelligence, however, have provided new and better tools for exploring human knowledge acquisition and utilization. Expert system technology represents one of the most promising of these…

The Information Science Experiment System - The computer for science experiments in space

NASA Technical Reports Server (NTRS)

Foudriat, Edwin C.; Husson, Charles

1989-01-01

The concept of the Information Science Experiment System (ISES), potential experiments, and system requirements are reviewed. The ISES is conceived as a computer resource in space whose aim is to assist computer, earth, and space science experiments, to develop and demonstrate new information processing concepts, and to provide an experiment base for developing new information technology for use in space systems. The discussion covers system hardware and architecture, operating system software, the user interface, and the ground communication link.

Medical imaging and registration in computer assisted surgery.

PubMed

Simon, D A; Lavallée, S

1998-09-01

Imaging, sensing, and computing technologies that are being introduced to aid in the planning and execution of surgical procedures are providing orthopaedic surgeons with a powerful new set of tools for improving clinical accuracy, reliability, and patient outcomes while reducing costs and operating times. Current computer assisted surgery systems typically include a measurement process for collecting patient specific medical data, a decision making process for generating a surgical plan, a registration process for aligning the surgical plan to the patient, and an action process for accurately achieving the goals specified in the plan. Some of the key concepts in computer assisted surgery applied to orthopaedics with a focus on the basic framework and underlying technologies is outlined. In addition, technical challenges and future trends in the field are discussed.

Ontology-based prediction of surgical events in laparoscopic surgery

NASA Astrophysics Data System (ADS)

Katić, Darko; Wekerle, Anna-Laura; Gärtner, Fabian; Kenngott, Hannes; Müller-Stich, Beat Peter; Dillmann, Rüdiger; Speidel, Stefanie

2013-03-01

Context-aware technologies have great potential to help surgeons during laparoscopic interventions. Their underlying idea is to create systems which can adapt their assistance functions automatically to the situation in the OR, thus relieving surgeons from the burden of managing computer assisted surgery devices manually. To this purpose, a certain kind of understanding of the current situation in the OR is essential. Beyond that, anticipatory knowledge of incoming events is beneficial, e.g. for early warnings of imminent risk situations. To achieve the goal of predicting surgical events based on previously observed ones, we developed a language to describe surgeries and surgical events using Description Logics and integrated it with methods from computational linguistics. Using n-Grams to compute probabilities of followup events, we are able to make sensible predictions of upcoming events in real-time. The system was evaluated on professionally recorded and labeled surgeries and showed an average prediction rate of 80%.

Mobile assistive technologies for the visually impaired.

PubMed

Hakobyan, Lilit; Lumsden, Jo; O'Sullivan, Dympna; Bartlett, Hannah

2013-01-01

There are around 285 million visually impaired people worldwide, and around 370,000 people are registered as blind or partially sighted in the UK. Ongoing advances in information technology (IT) are increasing the scope for IT-based mobile assistive technologies to facilitate the independence, safety, and improved quality of life of the visually impaired. Research is being directed at making mobile phones and other handheld devices accessible via our haptic (touch) and audio sensory channels. We review research and innovation within the field of mobile assistive technology for the visually impaired and, in so doing, highlight the need for successful collaboration between clinical expertise, computer science, and domain users to realize fully the potential benefits of such technologies. We initially reflect on research that has been conducted to make mobile phones more accessible to people with vision loss. We then discuss innovative assistive applications designed for the visually impaired that are either delivered via mainstream devices and can be used while in motion (e.g., mobile phones) or are embedded within an environment that may be in motion (e.g., public transport) or within which the user may be in motion (e.g., smart homes). Copyright © 2013 Elsevier Inc. All rights reserved.

Closing the Technological Gender Gap: Feminist Pedagogy in the Computer-Assisted Classroom.

ERIC Educational Resources Information Center

Hesse-Biber, Sharlene; Gilbert, Melissa Kesler

1994-01-01

Asserts that, although computers are playing an increasingly important role in the classroom, a technological gender gap serves as a barrier to the effective use of computers by women instructors in higher education. Encourages women to seize computer tools for their own educational purposes and argues for enhancing women's computer learning. (CFR)

Computer-based medical education in Benha University, Egypt: knowledge, attitude, limitations, and suggestions.

PubMed

Bayomy, Hanaa; El Awadi, Mona; El Araby, Eman; Abed, Hala A

2016-12-01

Computer-assisted medical education has been developed to enhance learning and enable high-quality medical care. This study aimed to assess computer knowledge and attitude toward the inclusion of computers in medical education among second-year medical students in Benha Faculty of Medicine, Egypt, to identify limitations, and obtain suggestions for successful computer-based learning. This was a one-group pre-post-test study, which was carried out on second-year students in Benha Faculty of Medicine. A structured self-administered questionnaire was used to compare students' knowledge, attitude, limitations, and suggestions toward computer usage in medical education before and after the computer course to evaluate the change in students' responses. The majority of students were familiar with use of the mouse and keyboard, basic word processing, internet and web searching, and e-mail both before and after the computer course. The proportion of students who were familiar with software programs other than the word processing and trouble-shoot software/hardware was significantly higher after the course (P<0.001). There was a significant increase in the proportion of students who agreed on owning a computer (P=0.008), the inclusion of computer skills course in medical education, downloading lecture handouts, and computer-based exams (P<0.001) after the course. After the course, there was a significant increase in the proportion of students who agreed that the lack of central computers limited the inclusion of computer in medical education (P<0.001). Although the lack of computer labs, lack of Information Technology staff mentoring, large number of students, unclear course outline, and lack of internet access were more frequently reported before the course (P<0.001), the majority of students suggested the provision of computer labs, inviting Information Technology staff to support computer teaching, and the availability of free Wi-Fi internet access covering several areas in the university campus; all would support computer-assisted medical education. Medical students in Benha University are computer literate, which allows for computer-based medical education. Staff training, provision of computer labs, and internet access are essential requirements for enhancing computer usage in medical education in the university.

Undergraduate Paramedic Students' Attitudes to E-Learning: Findings from Five University Programs

ERIC Educational Resources Information Center

Williams, Brett; Boyle, Malcolm; Molloy, Andrew; Brightwell, Richard; Munro, Graham; Service, Melinda; Brown, Ted

2011-01-01

Computers and computer-assisted instruction are being used with increasing frequency in the area of undergraduate paramedic education. Paramedic students' attitudes towards the use of e-learning technology and computer-assisted instruction have received limited attention in the empirical literature to date. The objective of this study was to…

Computer-Assisted Language Learning: Diversity in Research and Practice

ERIC Educational Resources Information Center

Stockwell, Glenn, Ed.

2012-01-01

Computer-assisted language learning (CALL) is an approach to teaching and learning languages that uses computers and other technologies to present, reinforce, and assess material to be learned, or to create environments where teachers and learners can interact with one another and the outside world. This book provides a much-needed overview of the…

[Application of image recognition technology in census of national traditional Chinese medicine resources].

PubMed

Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Shi, Ting-Ting; Wang, Hui; Li, Meng; Jing, Zhi-Xian; Guo, Lan-Ping; Huang, Lu-Qi

2017-11-01

With the development of computer and image processing technology, image recognition technology has been applied to the national medicine resources census work at all stages.Among them: ①In the preparatory work, in order to establish a unified library of traditional Chinese medicine resources, using text recognition technology based on paper materials, be the assistant in the digitalization of various categories related to Chinese medicine resources; to determine the representative area and plots of the survey from each census team, based on the satellite remote sensing image and vegetation map and other basic data, using remote sensing image classification and other technical methods to assist in determining the key investigation area. ②In the process of field investigation, to obtain the planting area of Chinese herbal medicine was accurately, we use the decision tree model, spectral feature and object-oriented method were used to assist the regional identification and area estimation of Chinese medicinal materials.③In the process of finishing in the industry, in order to be able to relatively accurately determine the type of Chinese medicine resources in the region, based on the individual photos of the plant, the specimens and the name of the use of image recognition techniques, to assist the statistical summary of the types of traditional Chinese medicine resources. ④In the application of the results of transformation, based on the pharmaceutical resources and individual samples of medicinal herbs, the development of Chinese medicine resources to identify APP and authentic herbs 3D display system, assisted the identification of Chinese medicine resources and herbs identification characteristics. The introduction of image recognition technology in the census of Chinese medicine resources, assisting census personnel to carry out related work, not only can reduce the workload of the artificial, improve work efficiency, but also improve the census results of information technology and sharing application ability. With the deepening of the work of Chinese medicine resources census, image recognition technology in the relevant work will also play its unique role. Copyright© by the Chinese Pharmaceutical Association.

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile for computer-integrated manufacturing technology begins with definitions for four occupations: manufacturing technician, quality technician, mechanical engineering technician, and computer-assisted design/drafting (CADD) technician. A chart lists competencies by unit and indicates whether entire or partial unit is…

Technician Program Uses Advanced Instruments.

ERIC Educational Resources Information Center

Stinson, Stephen

1981-01-01

Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald D Dudenhoeffer; Burce P Hallbert

Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functionalmore » obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.« less

[Application of computer-assisted 3D imaging simulation for surgery].

PubMed

Matsushita, S; Suzuki, N

1994-03-01

This article describes trends in application of various imaging technology in surgical planning, navigation, and computer aided surgery. Imaging information is essential factor for simulation in medicine. It includes three dimensional (3D) image reconstruction, neuro-surgical navigation, creating substantial model based on 3D imaging data and etc. These developments depend mostly on 3D imaging technique, which is much contributed by recent computer technology. 3D imaging can offer new intuitive information to physician and surgeon, and this method is suitable for mechanical control. By utilizing simulated results, we can obtain more precise surgical orientation, estimation, and operation. For more advancement, automatic and high speed recognition of medical imaging is being developed.

Voice stress analysis and evaluation

NASA Astrophysics Data System (ADS)

Haddad, Darren M.; Ratley, Roy J.

2001-02-01

Voice Stress Analysis (VSA) systems are marketed as computer-based systems capable of measuring stress in a person's voice as an indicator of deception. They are advertised as being less expensive, easier to use, less invasive in use, and less constrained in their operation then polygraph technology. The National Institute of Justice have asked the Air Force Research Laboratory for assistance in evaluating voice stress analysis technology. Law enforcement officials have also been asking questions about this technology. If VSA technology proves to be effective, its value for military and law enforcement application is tremendous.

Mobile Assisted Language Learning: Review of the Recent Applications of Emerging Mobile Technologies

ERIC Educational Resources Information Center

Yang, Jaeseok

2013-01-01

As mobile computing technologies have been more powerful and inclusive in people's daily life, the issue of mobile assisted language learning (MALL) has also been widely explored in CALL research. Many researches on MALL consider the emerging mobile technologies have considerable potentials for the effective language learning. This review study…

The Application of Web-based Computer-assisted Instruction Courseware within Health Assessment

NASA Astrophysics Data System (ADS)

Xiuyan, Guo

Health assessment is a clinical nursing course and places emphasis on clinical skills. The application of computer-assisted instruction in the field of nursing teaching solved the problems in the traditional lecture class. This article stated teaching experience of web-based computer-assisted instruction, based upon a two-year study of computer-assisted instruction courseware use within the course health assessment. The computer-assisted instruction courseware could develop teaching structure, simulate clinical situations, create teaching situations and facilitate students study.

Driving a Semiautonomous Mobile Robotic Car Controlled by an SSVEP-Based BCI.

PubMed

Stawicki, Piotr; Gembler, Felix; Volosyak, Ivan

2016-01-01

Brain-computer interfaces represent a range of acknowledged technologies that translate brain activity into computer commands. The aim of our research is to develop and evaluate a BCI control application for certain assistive technologies that can be used for remote telepresence or remote driving. The communication channel to the target device is based on the steady-state visual evoked potentials. In order to test the control application, a mobile robotic car (MRC) was introduced and a four-class BCI graphical user interface (with live video feedback and stimulation boxes on the same screen) for piloting the MRC was designed. For the purpose of evaluating a potential real-life scenario for such assistive technology, we present a study where 61 subjects steered the MRC through a predetermined route. All 61 subjects were able to control the MRC and finish the experiment (mean time 207.08 s, SD 50.25) with a mean (SD) accuracy and ITR of 93.03% (5.73) and 14.07 bits/min (4.44), respectively. The results show that our proposed SSVEP-based BCI control application is suitable for mobile robots with a shared-control approach. We also did not observe any negative influence of the simultaneous live video feedback and SSVEP stimulation on the performance of the BCI system.

Driving a Semiautonomous Mobile Robotic Car Controlled by an SSVEP-Based BCI

PubMed Central

2016-01-01

Brain-computer interfaces represent a range of acknowledged technologies that translate brain activity into computer commands. The aim of our research is to develop and evaluate a BCI control application for certain assistive technologies that can be used for remote telepresence or remote driving. The communication channel to the target device is based on the steady-state visual evoked potentials. In order to test the control application, a mobile robotic car (MRC) was introduced and a four-class BCI graphical user interface (with live video feedback and stimulation boxes on the same screen) for piloting the MRC was designed. For the purpose of evaluating a potential real-life scenario for such assistive technology, we present a study where 61 subjects steered the MRC through a predetermined route. All 61 subjects were able to control the MRC and finish the experiment (mean time 207.08 s, SD 50.25) with a mean (SD) accuracy and ITR of 93.03% (5.73) and 14.07 bits/min (4.44), respectively. The results show that our proposed SSVEP-based BCI control application is suitable for mobile robots with a shared-control approach. We also did not observe any negative influence of the simultaneous live video feedback and SSVEP stimulation on the performance of the BCI system. PMID:27528864

Computer Technology Resources for Literacy Projects.

ERIC Educational Resources Information Center

Florida State Council on Aging, Tallahassee.

This resource booklet was prepared to assist literacy projects and community adult education programs in determining the technology they need to serve more older persons. Section 1 contains the following reprinted articles: "The Human Touch in the Computer Age: Seniors Learn Computer Skills from Schoolkids" (Suzanne Kashuba);…

Using Computer Technology To Aid the Disabled Reader.

ERIC Educational Resources Information Center

Balajthy, Ernest

When matched for achievement level and educational objectives, computer technology can be particularly effective with at-risk students. Computer-assisted instructional software is the most widely available type of software. An exciting development pertinent to literacy education is the development of the "electronic book" (also called…

Hearing Impairments. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on advances in electronic aids, computers, telecommunications, and videodiscs to assist students with hearing impairments. Electronic aids include hearing aids, telephone devices for the deaf, teletypes, closed captioning systems for television, and…

University ESL Learners' Cross-Cultural Transitions through Web-Based Project Work

ERIC Educational Resources Information Center

Kang, Migyu; Bruna, Katherine Richardson

2013-01-01

This study sought to account for East Asian learners' cross-cultural transitions to US university Intensive English classroom culture within a technology-mediated language teaching approach, PrOCALL (Project-Oriented Computer Assisted Language Learning). It explored the influence of this approach on classroom interaction patterns acquired in the…

Measuring the Effectiveness of Blended Learning Environment: A Case Study in Malaysia

ERIC Educational Resources Information Center

Wai, Cho Cho; Seng, Ernest Lim Kok

2015-01-01

Learning environment has always been traditionally associated with the physical presence of classrooms, textbooks, pen-and-paper examinations and teachers. However, today's evolving technology has rapidly changed the face of education. Online learning, teleconferencing, internet, Computer Assisted Learning (CAL), Web-Based Distance Learning (WBDL)…

Artificial Walking Technologies to Improve Gait in Cerebral Palsy: Multichannel Neuromuscular Stimulation.

PubMed

Rose, Jessica; Cahill-Rowley, Katelyn; Butler, Erin E

2017-11-01

Cerebral palsy (CP) is the most common childhood motor disability and often results in debilitating walking abnormalities, such as flexed-knee and stiff-knee gait. Current medical and surgical treatments are only partially effective in improving gait abnormalities and may cause significant muscle weakness. However, emerging artificial walking technologies, such as step-initiated, multichannel neuromuscular electrical stimulation (NMES), can substantially improve gait patterns and promote muscle strength in children with spastic CP. NMES may also be applied to specific lumbar-sacral sensory roots to reduce spasticity. Development of tablet computer-based multichannel NMES can leverage lightweight, wearable wireless stimulators, advanced control design, and surface electrodes to activate lower-limb muscles. Musculoskeletal models have been used to characterize muscle contributions to unimpaired gait and identify high muscle demands, which can help guide multichannel NMES-assisted gait protocols. In addition, patient-specific NMES-assisted gait protocols based on 3D gait analysis can facilitate the appropriate activation of lower-limb muscles to achieve a more functional gait: stance-phase hip and knee extension and swing-phase sequence of hip and knee flexion followed by rapid knee extension. NMES-assisted gait treatment can be conducted as either clinic-based or home-based programs. Rigorous testing of multichannel NMES-assisted gait training protocols will determine optimal treatment dosage for future clinical trials. Evidence-based outcome evaluation using 3D kinematics or temporal-spatial gait parameters will help determine immediate neuroprosthetic effects and longer term neurotherapeutic effects of step-initiated, multichannel NMES-assisted gait in children with spastic CP. Multichannel NMES is a promising assistive technology to help children with spastic CP achieve a more upright, functional gait. © 2017 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

VRML Industry: Microcosms in the Making.

ERIC Educational Resources Information Center

Brown, Eric

1998-01-01

Discusses VRML (Virtual Reality Modeling Language) technology and some of its possible applications, including creating three-dimensional images on the Web, advertising, and data visualization in computer-assisted design and computer-assisted manufacturing (CAD/CAM). Future improvements are discussed, including streaming, database support, and…

Tuition Assistance Program (TAP) at ASA Institute of Computer and Business Technology, Inc. Audit for 1991-1992 through 1993-1994 Academic Years. Report 95-T-5 (Revised).

ERIC Educational Resources Information Center

Maldonado, Carmen

In an audit of the records and procedures for ASA Institute of Computer and Business Technology, Inc. (ASA), the New York Office of the State Comptroller determined that ASA was overpaid $696,352 because school officials incorrectly certified certain students as eligible for Tuition Assistance Program (TAP) awards. This error was discovered using…

The current status and future prospects of computer-assisted hip surgery.

PubMed

Inaba, Yutaka; Kobayashi, Naomi; Ike, Hiroyuki; Kubota, So; Saito, Tomoyuki

2016-03-01

The advances in computer assistance technology have allowed detailed three-dimensional preoperative planning and simulation of preoperative plans. The use of a navigation system as an intraoperative assistance tool allows more accurate execution of the preoperative plan, compared to manual operation without assistance of the navigation system. In total hip arthroplasty using CT-based navigation, three-dimensional preoperative planning with computer software allows the surgeon to determine the optimal angle of implant placement at which implant impingement is unlikely to occur in the range of hip joint motion necessary for daily activities of living, and to determine the amount of three-dimensional correction for leg length and offset. With the use of computer navigation for intraoperative assistance, the preoperative plan can be precisely executed. In hip osteotomy using CT-based navigation, the navigation allows three-dimensional preoperative planning, intraoperative confirmation of osteotomy sites, safe performance of osteotomy even under poor visual conditions, and a reduction in exposure doses from intraoperative fluoroscopy. Positions of the tips of chisels can be displayed on the computer monitor during surgery in real time, and staff other than the operator can also be aware of the progress of surgery. Thus, computer navigation also has an educational value. On the other hand, its limitations include the need for placement of trackers, increased radiation exposure from preoperative CT scans, and prolonged operative time. Moreover, because the position of a bone fragment cannot be traced after osteotomy, methods to find its precise position after its movement need to be developed. Despite the need to develop methods for the postoperative evaluation of accuracy for osteotomy, further application and development of these systems are expected in the future. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

The use of wireless laptop computers for computer-assisted learning in pharmacokinetics.

PubMed

Munar, Myrna Y; Singh, Harleen; Belle, Donna; Brackett, Carolyn C; Earle, Sandra B

2006-02-15

To implement computer-assisted learning workshops into pharmacokinetics courses in a doctor of pharmacy (PharmD) program. Workshops were designed for students to utilize computer software programs on laptop computers to build pharmacokinetic models to predict drug concentrations resulting from various dosage regimens. In addition, students were able to visualize through graphing programs how altering different parameters changed drug concentration-time curves. Surveys were conducted to measure students' attitudes toward computer technology before and after implementation. Finally, traditional examinations were used to evaluate student learning. Doctor of pharmacy students responded favorably to the use of wireless laptop computers in problem-based pharmacokinetic workshops. Eighty-eight percent (n = 61/69) and 82% (n = 55/67) of PharmD students completed surveys before and after computer implementation, respectively. Prior to implementation, 95% of students agreed that computers would enhance learning in pharmacokinetics. After implementation, 98% of students strongly agreed (p < 0.05) that computers enhanced learning. Examination results were significantly higher after computer implementation (89% with computers vs. 84% without computers; p = 0.01). Implementation of wireless laptop computers in a pharmacokinetic course enabled students to construct their own pharmacokinetic models that could respond to changing parameters. Students had greater comprehension and were better able to interpret results and provide appropriate recommendations. Computer-assisted pharmacokinetic techniques can be powerful tools when making decisions about drug therapy.

The Use of Wireless Laptop Computers for Computer-Assisted Learning in Pharmacokinetics

PubMed Central

Munar, Myrna Y.; Singh, Harleen; Belle, Donna; Brackett, Carolyn C.; Earle, Sandra B.

2006-01-01

Objective To implement computer-assisted learning workshops into pharmacokinetics courses in a doctor of pharmacy (PharmD) program. Design Workshops were designed for students to utilize computer software programs on laptop computers to build pharmacokinetic models to predict drug concentrations resulting from various dosage regimens. In addition, students were able to visualize through graphing programs how altering different parameters changed drug concentration-time curves. Surveys were conducted to measure students’ attitudes toward computer technology before and after implementation. Finally, traditional examinations were used to evaluate student learning. Assessment Doctor of pharmacy students responded favorably to the use of wireless laptop computers in problem-based pharmacokinetic workshops. Eighty-eight percent (n = 61/69) and 82% (n = 55/67) of PharmD students completed surveys before and after computer implementation, respectively. Prior to implementation, 95% of students agreed that computers would enhance learning in pharmacokinetics. After implementation, 98% of students strongly agreed (p < 0.05) that computers enhanced learning. Examination results were significantly higher after computer implementation (89% with computers vs. 84% without computers; p = 0.01). Conclusion Implementation of wireless laptop computers in a pharmacokinetic course enabled students to construct their own pharmacokinetic models that could respond to changing parameters. Students had greater comprehension and were better able to interpret results and provide appropriate recommendations. Computer-assisted pharmacokinetic techniques can be powerful tools when making decisions about drug therapy. PMID:17136147

Computer-assisted versus non-computer-assisted preoperative planning of corrective osteotomy for extra-articular distal radius malunions: a randomized controlled trial.

PubMed

Leong, Natalie L; Buijze, Geert A; Fu, Eric C; Stockmans, Filip; Jupiter, Jesse B

2010-12-14

Malunion is the most common complication of distal radius fracture. It has previously been demonstrated that there is a correlation between the quality of anatomical correction and overall wrist function. However, surgical correction can be difficult because of the often complex anatomy associated with this condition. Computer assisted surgical planning, combined with patient-specific surgical guides, has the potential to improve pre-operative understanding of patient anatomy as well as intra-operative accuracy. For patients with malunion of the distal radius fracture, this technology could significantly improve clinical outcomes that largely depend on the quality of restoration of normal anatomy. Therefore, the objective of this study is to compare patient outcomes after corrective osteotomy for distal radius malunion with and without preoperative computer-assisted planning and peri-operative patient-specific surgical guides. This study is a multi-center randomized controlled trial of conventional planning versus computer-assisted planning for surgical correction of distal radius malunion. Adult patients with extra-articular malunion of the distal radius will be invited to enroll in our study. After providing informed consent, subjects will be randomized to two groups: one group will receive corrective surgery with conventional preoperative planning, while the other will receive corrective surgery with computer-assisted pre-operative planning and peri-operative patient specific surgical guides. In the computer-assisted planning group, a CT scan of the affected forearm as well as the normal, contralateral forearm will be obtained. The images will be used to construct a 3D anatomical model of the defect and patient-specific surgical guides will be manufactured. Outcome will be measured by DASH and PRWE scores, grip strength, radiographic measurements, and patient satisfaction at 3, 6, and 12 months postoperatively. Computer-assisted surgical planning, combined with patient-specific surgical guides, is a powerful new technology that has the potential to improve the accuracy and consistency of orthopaedic surgery. To date, the role of this technology in upper extremity surgery has not been adequately investigated, and it is unclear whether its use provides any significant clinical benefit over traditional preoperative imaging protocols. Our study will represent the first randomized controlled trial investigating the use of computer assisted surgery in corrective osteotomy for distal radius malunions. NCT01193010.

Integrating Information Technologies Into Large Organizations

NASA Technical Reports Server (NTRS)

Gottlich, Gretchen; Meyer, John M.; Nelson, Michael L.; Bianco, David J.

1997-01-01

NASA Langley Research Center's product is aerospace research information. To this end, Langley uses information technology tools in three distinct ways. First, information technology tools are used in the production of information via computation, analysis, data collection and reduction. Second, information technology tools assist in streamlining business processes, particularly those that are primarily communication based. By applying these information tools to administrative activities, Langley spends fewer resources on managing itself and can allocate more resources for research. Third, Langley uses information technology tools to disseminate its aerospace research information, resulting in faster turn around time from the laboratory to the end-customer.

The Increasing Effects of Computers on Education.

ERIC Educational Resources Information Center

Gannon, John F.

Predicting that the teaching-learning process in American higher education is about to change drastically because of continuing innovations in computer-assisted technology, this paper argues that this change will be driven by inexpensive but powerful computer technology, and that it will manifest itself by reducing the traditional timing of…

The Advantages and Disadvantages of Computer Technology in Second Language Acquisition

ERIC Educational Resources Information Center

Lai, Cheng-Chieh; Kritsonis, William Allan

2006-01-01

The purpose of this article is to discuss the advantages and disadvantages of computer technology and Computer Assisted Language Learning (CALL) programs for current second language learning. According to the National Clearinghouse for English Language Acquisition & Language Instruction Educational Programs' report (2002), more than nine million…

Assisting People with Developmental Disabilities to Improve Computer Pointing Efficiency through Multiple Mice and Automatic Pointing Assistive Programs

ERIC Educational Resources Information Center

Shih, Ching-Hsiang

2011-01-01

This study combines multi-mice technology (people with disabilities can use standard mice, instead of specialized alternative computer input devices, to achieve complete mouse operation) with an assistive pointing function (i.e. cursor-capturing, which enables the user to move the cursor to the target center automatically), to assess whether two…

Customer Satisfaction Survey of Pacific Northwest National Laboratory's Technical Assistance Partners -- FY 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conger, Robin L.; Spanner, Gary E.

2011-11-02

The businesses that have utilized PNNL's Technology Assistance Program were sent a survey to solicit feedback about the program and to determine what, if any, outcomes resulted from the assistance provided. As part of its small business outreach, Pacific Northwest National Laboratory (PNNL) offers technology assistance to businesses with fewer than 500 employees throughout the nation and to businesses of any size in the 2 counties that contain the Hanford site. Upon request, up to 40 staff-hours of a researcher's time can be provided to address technology issues at no charge to the requesting firm. During FY 2011, PNNL completedmore » assistance for 54 firms. Topics of the technology assistance covered a broad range, including environment, energy, industrial processes, medical, materials, computers and software, and sensors. In FY 2011, PNNL's Technology Assistance Program (TAP) was funded by PNNL Overheads. Over the past 16 years, the Technology Assistance Program has received total funding of nearly $2.8 million from several federal and private sources.« less

The Effects of Cooperative, Competitive, and Individualistic Goal Structures on Computer-Assisted Instruction.

DTIC Science & Technology

1985-02-18

expected to double in each of the next five years. This growth of computer technology presents education with several challenges. One of the...provide some reassurence to educators who P worry that the group discussion will slow down the progress of students’ learning . The second issue examined...on learning from media. Review of Educational Research, 53, 445-459. Collins, A., Bruce, B., & Rubin, A. (1982). Microcomputer-based writing activities

Computer-assisted engineering data base

NASA Technical Reports Server (NTRS)

Dube, R. P.; Johnson, H. R.

1983-01-01

General capabilities of data base management technology are described. Information requirements posed by the space station life cycle are discussed, and it is asserted that data base management technology supporting engineering/manufacturing in a heterogeneous hardware/data base management system environment should be applied to meeting these requirements. Today's commercial systems do not satisfy all of these requirements. The features of an R&D data base management system being developed to investigate data base management in the engineering/manufacturing environment are discussed. Features of this system represent only a partial solution to space station requirements. Areas where this system should be extended to meet full space station information management requirements are discussed.

Computer-Assisted Microscopy in Science Teaching and Research.

ERIC Educational Resources Information Center

Radice, Gary P.

1997-01-01

Describes a technological approach to teaching the relationships between biological form and function. Computer-assisted image analysis was integrated into a microanatomy course. Students spend less time memorizing and more time observing, measuring, and interpreting, building technical and analytical skills. Appendices list hardware and software…

Exploring Computer Technology. The Illinois Plan for Industrial Education.

ERIC Educational Resources Information Center

Illinois State Univ., Normal.

This guide, which is one in the "Exploration" series of curriculum guides intended to assist junior high and middle school industrial educators in helping their students explore diverse industrial situations and technologies used in industry, deals with exploring computer technology. The following topics are covered in the individual…

Gaze-based assistive technology in daily activities in children with severe physical impairments-An intervention study.

PubMed

Borgestig, Maria; Sandqvist, Jan; Ahlsten, Gunnar; Falkmer, Torbjörn; Hemmingsson, Helena

2017-04-01

To establish the impact of a gaze-based assistive technology (AT) intervention on activity repertoire, autonomous use, and goal attainment in children with severe physical impairments, and to examine parents' satisfaction with the gaze-based AT and with services related to the gaze-based AT intervention. Non-experimental multiple case study with before, after, and follow-up design. Ten children with severe physical impairments without speaking ability (aged 1-15 years) participated in gaze-based AT intervention for 9-10 months, during which period the gaze-based AT was implemented in daily activities. Repertoire of computer activities increased for seven children. All children had sustained usage of gaze-based AT in daily activities at follow-up, all had attained goals, and parents' satisfaction with the AT and with services was high. The gaze-based AT intervention was effective in guiding parents and teachers to continue supporting the children to perform activities with the AT after the intervention program.

Computer-assisted total hip arthroplasty: coding the next generation of navigation systems for orthopedic surgery.

PubMed

Renkawitz, Tobias; Tingart, Markus; Grifka, Joachim; Sendtner, Ernst; Kalteis, Thomas

2009-09-01

This article outlines the scientific basis and a state-of-the-art application of computer-assisted orthopedic surgery in total hip arthroplasty (THA) and provides a future perspective on this technology. Computer-assisted orthopedic surgery in primary THA has the potential to couple 3D simulations with real-time evaluations of surgical performance, which has brought these developments from the research laboratory all the way to clinical use. Nonimage- or imageless-based navigation systems without the need for additional pre- or intra-operative image acquisition have stood the test to significantly reduce the variability in positioning the acetabular component and have shown precise measurement of leg length and offset changes during THA. More recently, computer-assisted orthopedic surgery systems have opened a new frontier for accurate surgical practice in minimally invasive, tissue-preserving THA. The future generation of imageless navigation systems will switch from simple measurement tasks to real navigation tools. These software algorithms will consider the cup and stem as components of a coupled biomechanical system, navigating the orthopedic surgeon to find an optimized complementary component orientation rather than target values intraoperatively, and are expected to have a high impact on clinical practice and postoperative functionality in modern THA.

Towards ubiquitous access of computer-assisted surgery systems.

PubMed

Liu, Hui; Lufei, Hanping; Shi, Weishong; Chaudhary, Vipin

2006-01-01

Traditional stand-alone computer-assisted surgery (CAS) systems impede the ubiquitous and simultaneous access by multiple users. With advances in computing and networking technologies, ubiquitous access to CAS systems becomes possible and promising. Based on our preliminary work, CASMIL, a stand-alone CAS server developed at Wayne State University, we propose a novel mobile CAS system, UbiCAS, which allows surgeons to retrieve, review and interpret multimodal medical images, and to perform some critical neurosurgical procedures on heterogeneous devices from anywhere at anytime. Furthermore, various optimization techniques, including caching, prefetching, pseudo-streaming-model, and compression, are used to guarantee the QoS of the UbiCAS system. UbiCAS enables doctors at remote locations to actively participate remote surgeries, share patient information in real time before, during, and after the surgery.

32 CFR Appendix F to Part 651 - Glossary

Code of Federal Regulations, 2013 CFR

2013-07-01

.... ASA(AL&T) Assistant Secretary of the Army (Acquisition, Logistics, and Technology). ASA(FM) Assistant.../Cost Analysis. EICS Environmental Impact Computer System. EIFS Economic Impact Forecast System. EIS... Record of Non-Applicability. RSC Regional Support Command. S&T Science and Technology. SA Secretary of...

32 CFR Appendix F to Part 651 - Glossary

Code of Federal Regulations, 2012 CFR

2012-07-01

.... ASA(AL&T) Assistant Secretary of the Army (Acquisition, Logistics, and Technology). ASA(FM) Assistant.../Cost Analysis. EICS Environmental Impact Computer System. EIFS Economic Impact Forecast System. EIS... Record of Non-Applicability. RSC Regional Support Command. S&T Science and Technology. SA Secretary of...

32 CFR Appendix F to Part 651 - Glossary

Code of Federal Regulations, 2014 CFR

2014-07-01

.... ASA(AL&T) Assistant Secretary of the Army (Acquisition, Logistics, and Technology). ASA(FM) Assistant.../Cost Analysis. EICS Environmental Impact Computer System. EIFS Economic Impact Forecast System. EIS... Record of Non-Applicability. RSC Regional Support Command. S&T Science and Technology. SA Secretary of...

Parallelized seeded region growing using CUDA.

PubMed

Park, Seongjin; Lee, Jeongjin; Lee, Hyunna; Shin, Juneseuk; Seo, Jinwook; Lee, Kyoung Ho; Shin, Yeong-Gil; Kim, Bohyoung

2014-01-01

This paper presents a novel method for parallelizing the seeded region growing (SRG) algorithm using Compute Unified Device Architecture (CUDA) technology, with intention to overcome the theoretical weakness of SRG algorithm of its computation time being directly proportional to the size of a segmented region. The segmentation performance of the proposed CUDA-based SRG is compared with SRG implementations on single-core CPUs, quad-core CPUs, and shader language programming, using synthetic datasets and 20 body CT scans. Based on the experimental results, the CUDA-based SRG outperforms the other three implementations, advocating that it can substantially assist the segmentation during massive CT screening tests.

Computer-based assistive technology device for use by children with physical disabilities: a cross-sectional study.

PubMed

Lidström, Helene; Almqvist, Lena; Hemmingsson, Helena

2012-07-01

To investigate the prevalence of children with physical disabilities who used a computer-based ATD, and to examine characteristics differences in children and youths who do or do not use computer-based ATDs, as well as, investigate differences that might influence the satisfaction of those two groups of children and youths when computers are being used for in-school and outside school activities. A cross-sectional survey about computer-based activities in and outside school (n = 287) and group comparisons. The prevalence of using computer-based ATDs was about 44 % (n = 127) of the children in this sample. These children were less satisfied with their computer use in education and outside school activities than the children who did not use an ATD. Improved coordination of the usage of computer-based ATDs in school and in the home, including service and support, could increase the opportunities for children with physical disabilities who use computer-based ATDs to perform the computer activities they want, need and are expected to do in school and outside school.

COMPUTER-ASSISTED MOTION ANALYSIS OF SPERM FROM THE COMMON CARP

EPA Science Inventory

Computer-assisted semen analysis (CASA) technology was applied to the measurement of sperm motility parameters in the common carp Cyprinus carpio. Activated sperm were videotaped at 200 frames s-1 and analysed with the CellTrak/S CASA research system. The percentage of motile cel...

Using a decade of data on medical student computer literacy for strategic planning

PubMed Central

Seago, Brenda L.; Schlesinger, Jeanne B.; Hampton, Carol L.

2002-01-01

Purpose: From 1991 through 2000, incoming medical students (M-Is) at the School of Medicine at Virginia Commonwealth University have been surveyed with a written questionnaire on their computer literacy. The survey's purpose is to learn the students' levels of knowledge, skill, and experience with computer technology to guide instructional services and facilities. Methodology: The questionnaire was administered during M-I orientation or mailed to students' homes after matriculation. It evolved from sixteen questions in 1991 to twenty-three questions in 2000, with fifteen questions common to all. Results: The average survey response rate was 81% from an average of 177 students. Six major changes were introduced based on information collected from the surveys and advances in technology: production of CD-ROMs distributed to students containing required computer-based instructional programs, delivery of evaluation instruments to students via the Internet, modification of the lab to a mostly PC-based environment, development of an electronic curriculum Website, development of computerized examinations for medical students to prepare them for the computerized national board examinations, and initiation of a personal digital assistant (PDA) project for students to evaluate PDAs' usefulness in clinical settings. Conclusion: The computer literacy survey provides a snapshot of students' past and present use of technology and guidance for the development of services and facilities. PMID:11999178

Using a decade of data on medical student computer literacy for strategic planning.

PubMed

Seago, Brenda L; Schlesinger, Jeanne B; Hampton, Carol L

2002-04-01

From 1991 through 2000, incoming medical students (M-Is) at the School of Medicine at Virginia Commonwealth University have been surveyed with a written questionnaire on their computer literacy. The survey's purpose is to learn the students' levels of knowledge, skill, and experience with computer technology to guide instructional services and facilities. The questionnaire was administered during M-I orientation or mailed to students' homes after matriculation. It evolved from sixteen questions in 1991 to twenty-three questions in 2000, with fifteen questions common to all. The average survey response rate was 81% from an average of 177 students. Six major changes were introduced based on information collected from the surveys and advances in technology: production of CD-ROMs distributed to students containing required computer-based instructional programs, delivery of evaluation instruments to students via the Internet, modification of the lab to a mostly PC-based environment, development of an electronic curriculum Website, development of computerized examinations for medical students to prepare them for the computerized national board examinations, and initiation of a personal digital assistant (PDA) project for students to evaluate PDAs' usefulness in clinical settings. The computer literacy survey provides a snapshot of students' past and present use of technology and guidance for the development of services and facilities.

Consumer-based technology for distribution of surgical videos for objective evaluation.

PubMed

Gonzalez, Ray; Martinez, Jose M; Lo Menzo, Emanuele; Iglesias, Alberto R; Ro, Charles Y; Madan, Atul K

2012-08-01

The Global Operative Assessment of Laparoscopic Skill (GOALS) is one validated metric utilized to grade laparoscopic skills and has been utilized to score recorded operative videos. To facilitate easier viewing of these recorded videos, we are developing novel techniques to enable surgeons to view these videos. The objective of this study is to determine the feasibility of utilizing widespread current consumer-based technology to assist in distributing appropriate videos for objective evaluation. Videos from residents were recorded via a direct connection from the camera processor via an S-video output via a cable into a hub to connect to a standard laptop computer via a universal serial bus (USB) port. A standard consumer-based video editing program was utilized to capture the video and record in appropriate format. We utilized mp4 format, and depending on the size of the file, the videos were scaled down (compressed), their format changed (using a standard video editing program), or sliced into multiple videos. Standard available consumer-based programs were utilized to convert the video into a more appropriate format for handheld personal digital assistants. In addition, the videos were uploaded to a social networking website and video sharing websites. Recorded cases of laparoscopic cholecystectomy in a porcine model were utilized. Compression was required for all formats. All formats were accessed from home computers, work computers, and iPhones without difficulty. Qualitative analyses by four surgeons demonstrated appropriate quality to grade for these formats. Our preliminary results show promise that, utilizing consumer-based technology, videos can be easily distributed to surgeons to grade via GOALS via various methods. Easy accessibility may help make evaluation of resident videos less complicated and cumbersome.

Algerian EFL University Teachers' Attitudes towards Computer Assisted Language Learning: The Case of Djilali Liabes University

ERIC Educational Resources Information Center

Bouchefra, Miloud; Baghoussi, Meriem

2017-01-01

Computer Assisted Language Learning (CALL) is still groping its way into Algerian English as a Foreign Language (EFL) classroom, where Information Communications Technologies (ICTs) are defined in terms of occasional use of computers and data projectors for material presentation in the classroom. Though major issues in the image of the lack of…

A Review of Issues in Computer-Assisted Counseling and a New Approach to Its Applications in College Selection.

ERIC Educational Resources Information Center

Colburn, Kenneth A.

Issues and approaches in computer-assisted counseling are presented in this thesis. Reasons are considered for the ineffectiveness of school guidance counselors in helping students make college selections, and a reconceptualization of counseling as a technology of helping is suggested. The uses of computers in counseling are examined along with…

Computer-Assisted Virtual Planning for Surgical Guide Manufacturing and Internal Distractor Adaptation in the Management of Midface Hypoplasia in Cleft Patients.

PubMed

Scolozzi, Paolo; Herzog, Georges

2017-07-01

We are reporting the treatment of severe maxillary hypoplasia in two patients with unilateral cleft lip and palate by using a specific approach combining the Le Fort I distraction osteogenesis technique coupled with computer-aided design/computer-aided manufacturing customized surgical guides and internal distractors based on virtual computational planning. This technology allows for the transfer of the virtual planned reconstruction to the operating room by using custom patient-specific implants, surgical splints, surgical cutting guides, and surgical guides to plate or distractor adaptation.

Zap 'Em with Assistive Technology: Notetaking, Modified Materials, Assistive Writing Tools, References, Organizational Tools, Cognitive Assistance, Adapted Access.

ERIC Educational Resources Information Center

Lahm, Elizabeth A.; Morrissette, Sandra K.

This collection of materials describes different types of computer applications and software that can help students with disabilities. It contains information on: (1) Easy Access, a feature of the systems software on every Macintosh computer that allows use of the keypad instead of the mouse, options for slow keys, and options for sticky keys; (2)…

Exploring the Human Element of Computer-Assisted Language Learning: An Iranian Context

ERIC Educational Resources Information Center

Fatemi Jahromi, Seyed Abolghasseminits; Salimi, Farimah

2013-01-01

Based on various theories of human agency (Ajzen, I. (2005). "Attitudes, personality and behavior" (2nd ed.). London: Open University Press; Davis, F.D. (1989). Perceived usefulness, perceived ease of use, and user acceptance of information technology. "MIS Quarterly", 13, 319-340; Rogers, E.M. (1983). "Diffusion of…

Impact of CALL In-House Professional Development Training on Teachers' Pedagogy: An Evaluative Study

ERIC Educational Resources Information Center

Sulaimani, Amjjad Osama; Sarhandi, Pir Suhail Ahmed; Buledi, Majid Hussain

2017-01-01

This study examines the impact of computer-assisted language learning (CALL) in-house professional development trainings based on Technological Pedagogical Content Knowledge in-Action (TPACK-In-Action) model on female teachers' pedagogy at a Saudi Arabian university. Data were collected using survey questionnaires to gather participants'…

Constructing a "Third Space" for EFL Learners: Where Language and Cultures Meet

ERIC Educational Resources Information Center

Liaw, Meei-Ling

2007-01-01

Efforts have been made by language educators and researchers to use computer technology to assist L2 learners' growth in either linguistic or intercultural competence. Nonetheless, web-based environments devoted to developing both types of competences in tandem are new and experimental. The purpose of this project, which involves the collaboration…

Dynamic Visualizations: How Attraction, Motivation and Communication Affect Streaming Video Tutorial Implementation

ERIC Educational Resources Information Center

Boger, Claire

2011-01-01

The rapid advancement in the capabilities of computer technologies has made it easier to design and deploy dynamic visualizations in web-based learning environments; yet, the implementation of these dynamic visuals has been met with mixed results. While many guidelines exist to assist instructional designers in the design and application of…

The Use of Mobile Technologies in Multimedia-Supported Learning Environments

ERIC Educational Resources Information Center

Duygu Eristi, Suzan; Haseski, Halil Ibrahim; Uluuysal, Betul; Karakoyun, Ferit

2011-01-01

The aim of the study is to reveal the students' opinions about the use of PDAs (Personal Digital Assistant) in learning environment within the context of multimedia based applications. Through purposeful sampling, 17 undergraduate students attending the elective course of BTO 323 Character Design in Computer Environment in the Department of…

Spoken Grammar Practice and Feedback in an ASR-Based CALL System

ERIC Educational Resources Information Center

de Vries, Bart Penning; Cucchiarini, Catia; Bodnar, Stephen; Strik, Helmer; van Hout, Roeland

2015-01-01

Speaking practice is important for learners of a second language. Computer assisted language learning (CALL) systems can provide attractive opportunities for speaking practice when combined with automatic speech recognition (ASR) technology. In this paper, we present a CALL system that offers spoken practice of word order, an important aspect of…

Theory Meets Praxis: From Derrida to the Beginning German Classroom via the Internet

ERIC Educational Resources Information Center

Hasty, Will

2006-01-01

Based on practical experience in a new online beginning German course sequence, the author of this essay argues that contemporary cultural developments associated with the emergence of new technologies, particularly computer-assisted language learning, provide new opportunities to theorize German Studies curricula from the beginning level onward.…

Task-Oriented Spoken Dialog System for Second-Language Learning

ERIC Educational Resources Information Center

Kwon, Oh-Woog; Kim, Young-Kil; Lee, Yunkeun

2016-01-01

This paper introduces a Dialog-Based Computer Assisted second-Language Learning (DB-CALL) system using task-oriented dialogue processing technology. The system promotes dialogue with a second-language learner for a specific task, such as purchasing tour tickets, ordering food, passing through immigration, etc. The dialog system plays a role of a…

Task-Induced Development of Hinting Behaviors in Online Task-Oriented L2 Interaction

ERIC Educational Resources Information Center

Balaman, Ufuk

2018-01-01

Technology-mediated task settings are rich interactional domains in which second language (L2) learners manage a multitude of interactional resources for task accomplishment. The affordances of these settings have been repeatedly addressed in computer-assisted language learning (CALL) literature mainly based on theory-informed task design…

The Future of School Library Media Centers.

ERIC Educational Resources Information Center

Craver, Kathleen W.

1984-01-01

Examines impact of technology on school library media program development and role of school librarian. Technological trends (computerized record keeping, computer-assisted instruction, networking, home computers, videodiscs), employment and economic trends, education of school librarians, social and behavioral trends, and organizational and…

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

A Pilot Study of the Use of Emerging Computer Technologies to Improve the Effectiveness of Reading and Writing Therapies in Children with Down Syndrome

ERIC Educational Resources Information Center

Felix, Vanessa G.; Mena, Luis J.; Ostos, Rodolfo; Maestre, Gladys E.

2017-01-01

Despite the potential benefits that computer approaches could provide for children with cognitive disabilities, research and implementation of emerging approaches to learning supported by computing technology has not received adequate attention. We conducted a pilot study to assess the effectiveness of a computer-assisted learning tool, named…

Use of Computer-Assisted Technologies (CAT) to Enhance Social, Communicative, and Language Development in Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Ploog, Bertram O.; Scharf, Alexa; Nelson, DeShawn; Brooks, Patricia J.

2013-01-01

Major advances in multimedia computer technology over the past decades have made sophisticated computer games readily available to the public. This, combined with the observation that most children, including those with autism spectrum disorders (ASD), show an affinity to computers, has led researchers to recognize the potential of computer…

A Vision-Based Driver Nighttime Assistance and Surveillance System Based on Intelligent Image Sensing Techniques and a Heterogamous Dual-Core Embedded System Architecture

PubMed Central

Chen, Yen-Lin; Chiang, Hsin-Han; Chiang, Chuan-Yen; Liu, Chuan-Ming; Yuan, Shyan-Ming; Wang, Jenq-Haur

2012-01-01

This study proposes a vision-based intelligent nighttime driver assistance and surveillance system (VIDASS system) implemented by a set of embedded software components and modules, and integrates these modules to accomplish a component-based system framework on an embedded heterogamous dual-core platform. Therefore, this study develops and implements computer vision and sensing techniques of nighttime vehicle detection, collision warning determination, and traffic event recording. The proposed system processes the road-scene frames in front of the host car captured from CCD sensors mounted on the host vehicle. These vision-based sensing and processing technologies are integrated and implemented on an ARM-DSP heterogamous dual-core embedded platform. Peripheral devices, including image grabbing devices, communication modules, and other in-vehicle control devices, are also integrated to form an in-vehicle-embedded vision-based nighttime driver assistance and surveillance system. PMID:22736956

A vision-based driver nighttime assistance and surveillance system based on intelligent image sensing techniques and a heterogamous dual-core embedded system architecture.

PubMed

Chen, Yen-Lin; Chiang, Hsin-Han; Chiang, Chuan-Yen; Liu, Chuan-Ming; Yuan, Shyan-Ming; Wang, Jenq-Haur

2012-01-01

This study proposes a vision-based intelligent nighttime driver assistance and surveillance system (VIDASS system) implemented by a set of embedded software components and modules, and integrates these modules to accomplish a component-based system framework on an embedded heterogamous dual-core platform. Therefore, this study develops and implements computer vision and sensing techniques of nighttime vehicle detection, collision warning determination, and traffic event recording. The proposed system processes the road-scene frames in front of the host car captured from CCD sensors mounted on the host vehicle. These vision-based sensing and processing technologies are integrated and implemented on an ARM-DSP heterogamous dual-core embedded platform. Peripheral devices, including image grabbing devices, communication modules, and other in-vehicle control devices, are also integrated to form an in-vehicle-embedded vision-based nighttime driver assistance and surveillance system.

Evaluation of technology to identify and assess overweight children and adolescents.

PubMed

Gance-Cleveland, Bonnie; Gilbert, Lynn H; Kopanos, Taynin; Gilbert, Kevin C

2010-01-01

The current obesity epidemic has produced a generation of children that may be the first to have a life expectancy shorter than their parents. To address the obesity epidemic, experts have published recommendations for providers. Research suggests the publication of guidelines may not change provider behavior. This study evaluates computer assistance for implementing obesity guidelines in school-based health centers. Significant improvements in identification and assessment of obesity in children with technology support were noted. Computer decision support shows promise for promoting the implementation of current recommendations by supporting providers in identifying, assessing, and providing tailored recommendations for children at risk of obesity.

Assistive Technology for Students with Visual Impairments: In-Service Teacher Training and Its Relationship to Student Access and Usage across Academic Subject Areas

ERIC Educational Resources Information Center

Segers, Kathryn S.

2014-01-01

Technology is used in almost every school and classroom today and motivates and intrigues students with vision. This same technology is often not accessible to students with visual impairments and blindness. Assistive technology must be used by students with visual impairments and blindness in order to access a computer, the Internet, and print…

Assisting Adult Higher Education via Personal Computer: Technology and Distance Education.

ERIC Educational Resources Information Center

Spradley, Evelyn

1993-01-01

Thomas Edison State College (New Jersey) has developed a computer-assisted distance learning system to make undergraduate study more accessible, efficient, and effective for nontraditional students. The three main components: an infrastructure to provide varied technical services; an independent study course system; and diagnostic, online pretests…

Conversation Analysis in Computer-Assisted Language Learning

ERIC Educational Resources Information Center

González-Lloret, Marta

2015-01-01

The use of Conversation Analysis (CA) in the study of technology-mediated interactions is a recent methodological addition to qualitative research in the field of Computer-assisted Language Learning (CALL). The expansion of CA in Second Language Acquisition research, coupled with the need for qualitative techniques to explore how people interact…

The NASA/Baltimore Applications Project (BAP). Computer aided dispatch and communications system for the Baltimore Fire Department: A case study of urban technology application

NASA Technical Reports Server (NTRS)

Levine, A. L.

1981-01-01

An engineer and a computer expert from Goddard Space Flight Center were assigned to provide technical assistance in the design and installation of a computer assisted system for dispatching and communicating with fire department personnel and equipment in Baltimore City. Primary contributions were in decision making and management processes. The project is analyzed from four perspectives: (1) fire service; (2) technology transfer; (3) public administration; and (5) innovation. The city benefitted substantially from the approach and competence of the NASA personnel. Given the proper conditions, there are distinct advantages in having a nearby Federal laboratory provide assistance to a city on a continuing basis, as is done in the Baltimore Applications Project.

The development of a computer-assisted instruction system for clinical nursing skills with virtual instruments concepts: A case study for intra-aortic balloon pumping.

PubMed

Chang, Ching-I; Yan, Huey-Yeu; Sung, Wen-Hsu; Shen, Shu-Cheng; Chuang, Pao-Yu

2006-01-01

The purpose of this research was to develop a computer-aided instruction system for intra-aortic balloon pumping (IABP) skills in clinical nursing with virtual instrument (VI) concepts. Computer graphic technologies were incorporated to provide not only static clinical nursing education, but also the simulated function of operating an expensive medical instrument with VI techniques. The content of nursing knowledge was adapted from current well-accepted clinical training materials. The VI functions were developed using computer graphic technology with photos of real medical instruments taken by digital camera. We wish the system could provide beginners of nursing education important teaching assistance.

Access to the Arts through Assistive Technology.

ERIC Educational Resources Information Center

Frame, Charles

Personnel in the rehabilitation field have come to recognize the possibilities and implications of computers as assistive technology for disabled persons. This manual provides information on how to adapt the Unicorn Board, Touch Talker/Light Talker overlays, the Adaptive Firmware Card setup disk, and Trace-Transparent Access Module (T-TAM) to…

Computer Literacy for Teachers.

ERIC Educational Resources Information Center

Sarapin, Marvin I.; Post, Paul E.

Basic concepts of computer literacy are discussed as they relate to industrial arts/technology education. Computer hardware development is briefly examined, and major software categories are defined, including database management, computer graphics, spreadsheet programs, telecommunications and networking, word processing, and computer assisted and…

Application of computer assisted combinatorial chemistry in antivirial, antimalarial and anticancer agents design

NASA Astrophysics Data System (ADS)

Burello, E.; Bologa, C.; Frecer, V.; Miertus, S.

Combinatorial chemistry and technologies have been developed to a stage where synthetic schemes are available for generation of a large variety of organic molecules. The innovative concept of combinatorial design assumes that screening of a large and diverse library of compounds will increase the probability of finding an active analogue among the compounds tested. Since the rate at which libraries are screened for activity currently constitutes a limitation to the use of combinatorial technologies, it is important to be selective about the number of compounds to be synthesized. Early experience with combinatorial chemistry indicated that chemical diversity alone did not result in a significant increase in the number of generated lead compounds. Emphasis has therefore been increasingly put on the use of computer assisted combinatorial chemical techniques. Computational methods are valuable in the design of virtual libraries of molecular models. Selection strategies based on computed physicochemical properties of the models or of a target compound are introduced to reduce the time and costs of library synthesis and screening. In addition, computational structure-based library focusing methods can be used to perform in silico screening of the activity of compounds against a target receptor by docking the ligands into the receptor model. Three case studies are discussed dealing with the design of targeted combinatorial libraries of inhibitors of HIV-1 protease, P. falciparum plasmepsin and human urokinase as potential antivirial, antimalarial and anticancer drugs. These illustrate library focusing strategies.

Current status and future prospects for enabling chemistry technology in the drug discovery process.

PubMed

Djuric, Stevan W; Hutchins, Charles W; Talaty, Nari N

2016-01-01

This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of "dangerous" reagents. Also featured are advances in the "computer-assisted drug design" area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities.

Blood Pump Development Using Rocket Engine Flow Simulation Technology

NASA Technical Reports Server (NTRS)

Kwak, Dochan; Kiris, Cetin

2001-01-01

This paper reports the progress made towards developing complete blood flow simulation capability in humans, especially in the presence of artificial devices such as valves and ventricular assist devices. Devices modeling poses unique challenges different from computing the blood flow in natural hearts and arteries. There are many elements needed to quantify the flow in these devices such as flow solvers, geometry modeling including flexible walls, moving boundary procedures and physiological characterization of blood. As a first step, computational technology developed for aerospace applications was extended to the analysis and development of a ventricular assist device (VAD), i.e., a blood pump. The blood flow in a VAD is practically incompressible and Newtonian, and thus an incompressible Navier-Stokes solution procedure can be applied. A primitive variable formulation is used in conjunction with the overset grid approach to handle complex moving geometry. The primary purpose of developing the incompressible flow analysis capability was to quantify the flow in advanced turbopump for space propulsion system. The same procedure has been extended to the development of NASA-DeBakey VAD that is based on an axial blood pump. Due to massive computing requirements, high-end computing is necessary for simulating three-dimensional flow in these pumps. Computational, experimental, and clinical results are presented.

The Evolution of Computer-Assisted Total Hip Arthroplasty and Relevant Applications.

PubMed

Chang, Jun-Dong; Kim, In-Sung; Bhardwaj, Atul M; Badami, Ramachandra N

2017-03-01

In total hip arthroplasty (THA), the accurate positioning of implants is the key to achieve a good clinical outcome. Computer-assisted orthopaedic surgery (CAOS) has been developed for more accurate positioning of implants during the THA. There are passive, semi-active, and active systems in CAOS for THA. Navigation is a passive system that only provides information and guidance to the surgeon. There are 3 types of navigation: imageless navigation, computed tomography (CT)-based navigation, and fluoroscopy-based navigation. In imageless navigation system, a new method of registration without the need to register the anterior pelvic plane was introduced. CT-based navigation can be efficiently used for pelvic plane reference, the functional pelvic plane in supine which adjusts anterior pelvic plane sagittal tilt for targeting the cup orientation. Robot-assisted system can be either active or semi-active. The active robotic system performs the preparation for implant positioning as programmed preoperatively. It has been used for only femoral implant cavity preparation. Recently, program for cup positioning was additionally developed. Alternatively, for ease of surgeon acceptance, semi-active robot systems are developed. It was initially applied only for cup positioning. However, with the development of enhanced femoral workflows, this system can now be used to position both cup and stem. Though there have been substantial advancements in computer-assisted THA, its use can still be controversial at present due to the steep learning curve, intraoperative technical issues, high cost and etc. However, in the future, CAOS will certainly enable the surgeon to operate more accurately and lead to improved outcomes in THA as the technology continues to evolve rapidly.

A natural language-based presentation of cognitive stimulation to people with dementia in assistive technology: A pilot study.

PubMed

Dethlefs, Nina; Milders, Maarten; Cuayáhuitl, Heriberto; Al-Salkini, Turkey; Douglas, Lorraine

2017-12-01

Currently, an estimated 36 million people worldwide are affected by Alzheimer's disease or related dementias. In the absence of a cure, non-pharmacological interventions, such as cognitive stimulation, which slow down the rate of deterioration can benefit people with dementia and their caregivers. Such interventions have shown to improve well-being and slow down the rate of cognitive decline. It has further been shown that cognitive stimulation in interaction with a computer is as effective as with a human. However, the need to operate a computer often represents a difficulty for the elderly and stands in the way of widespread adoption. A possible solution to this obstacle is to provide a spoken natural language interface that allows people with dementia to interact with the cognitive stimulation software in the same way as they would interact with a human caregiver. This makes the assistive technology accessible to users regardless of their technical skills and provides a fully intuitive user experience. This article describes a pilot study that evaluated the feasibility of computer-based cognitive stimulation through a spoken natural language interface. Prototype software was evaluated with 23 users, including healthy elderly people and people with dementia. Feedback was overwhelmingly positive.

Medical education as a science: the quality of evidence for computer-assisted instruction.

PubMed

Letterie, Gerard S

2003-03-01

A marked increase in the number of computer programs for computer-assisted instruction in the medical sciences has occurred over the past 10 years. The quality of both the programs and the literature that describe these programs has varied considerably. The purposes of this study were to evaluate the published literature that described computer-assisted instruction in medical education and to assess the quality of evidence for its implementation, with particular emphasis on obstetrics and gynecology. Reports published between 1988 and 2000 on computer-assisted instruction in medical education were identified through a search of MEDLINE and Educational Resource Identification Center and a review of the bibliographies of the articles that were identified. Studies were selected if they included a description of computer-assisted instruction in medical education, regardless of the type of computer program. Data were extracted with a content analysis of 210 reports. The reports were categorized according to study design (comparative, prospective, descriptive, review, or editorial), type of computer-assisted instruction, medical specialty, and measures of effectiveness. Computer-assisted instruction programs included online technologies, CD-ROMs, video laser disks, multimedia work stations, virtual reality, and simulation testing. Studies were identified in all medical specialties, with a preponderance in internal medicine, general surgery, radiology, obstetrics and gynecology, pediatrics, and pathology. Ninety-six percent of the articles described a favorable impact of computer-assisted instruction in medical education, regardless of the quality of the evidence. Of the 210 reports that were identified, 60% were noncomparative, descriptive reports of new techniques in computer-assisted instruction, and 15% and 14% were reviews and editorials, respectively, of existing technology. Eleven percent of studies were comparative and included some form of assessment of the effectiveness of the computer program. These assessments included pre- and posttesting and questionnaires to score program quality, perceptions of the medical students and/or residents regarding the program, and impact on learning. In one half of these comparative studies, computer-assisted instruction was compared with traditional modes of teaching, such as text and lectures. Six studies compared performance before and after the computer-assisted instruction. Improvements were shown in 5 of the studies. In the remainder of the studies, computer-assisted instruction appeared to result in similar test performance. Despite study design or outcome, most articles described enthusiastic endorsement of the programs by the participants, including medical students, residents, and practicing physicians. Only 1 study included cost analysis. Thirteen of the articles were in obstetrics and gynecology. Computer-assisted instruction has assumed to have an increasing role in medical education. In spite of enthusiastic endorsement and continued improvements in software, few studies of good design clearly demonstrate improvement in medical education over traditional modalities. There are no comparative studies in obstetrics and gynecology that demonstrate a clear-cut advantage. Future studies of computer-assisted instruction that include comparisons and cost assessments to gauge their effectiveness over traditional methods may better define their precise role.

Computer Assisted REhabilitation (CARE) Lab: A novel approach towards Pediatric Rehabilitation 2.0.

PubMed

Olivieri, Ivana; Meriggi, Paolo; Fedeli, Cristina; Brazzoli, Elena; Castagna, Anna; Roidi, Marina Luisa Rodocanachi; Angelini, Lucia

2018-01-01

Pediatric Rehabilitation therapists have always worked using a variety of off-the-shelf or custom-made objects and devices, more recently including computer based systems. These Information and Communication Technology (ICT) solutions vary widely in complexity, from easy-to-use interactive videogame consoles originally intended for entertainment purposes to sophisticated systems specifically developed for rehabilitation.This paper describes the principles underlying an innovative "Pediatric Rehabilitation 2.0" approach, based on the combination of suitable ICT solutions and traditional rehabilitation, which has been progressively refined while building up and using a computer-assisted rehabilitation laboratory. These principles are thus summarized in the acronym EPIQ, to account for the terms Ecological, Personalized, Interactive and Quantitative. The paper also presents the laboratory, which has been designed to meet the children's rehabilitation needs and to empower therapists in their work. The laboratory is equipped with commercial hardware and specially developed software called VITAMIN: a virtual reality platform for motor and cognitive rehabilitation.

Enabling Self-Directed Computer Use for Individuals with Cerebral Palsy: A Systematic Review of Assistive Devices and Technologies

ERIC Educational Resources Information Center

Davies, T. Claire; Mudge, Suzie; Ameratunga, Shanthi; Stott, N. Susan

2010-01-01

Aim: The purpose of this study was to systematically review published evidence on the development, use, and effectiveness of devices and technologies that enable or enhance self-directed computer access by individuals with cerebral palsy (CP). Methods: Nine electronic databases were searched using keywords "computer", "software", "spastic",…

The Dinosaurs Didn't See It Coming, But Historians Had Better: Computer Aided Activities in the History Classroom.

ERIC Educational Resources Information Center

Phillips, Julieanne

2001-01-01

States that in ninety percent of colleges across the United States, some or most classrooms are wired for technology integration. Posits that to facilitate student learning and prepare students for future technological advances, instructors must use effective teaching activities that include computers. Provides a sample computer assisted history…

[COMPUTER ASSISTED DESIGN AND ELECTRON BEAMMELTING RAPID PROTOTYPING METAL THREE-DIMENSIONAL PRINTING TECHNOLOGY FOR PREPARATION OF INDIVIDUALIZED FEMORAL PROSTHESIS].

PubMed

Liu, Hongwei; Weng, Yiping; Zhang, Yunkun; Xu, Nanwei; Tong, Jing; Wang, Caimei

2015-09-01

To study the feasibility of preparation of the individualized femoral prosthesis through computer assisted design and electron beammelting rapid prototyping (EBM-RP) metal three-dimensional (3D) printing technology. One adult male left femur specimen was used for scanning with 64-slice spiral CT; tomographic image data were imported into Mimics15.0 software to reconstruct femoral 3D model, then the 3D model of individualized femoral prosthesis was designed through UG8.0 software. Finally the 3D model data were imported into EBM-RP metal 3D printer to print the individualized sleeve. According to the 3D model of individualized prosthesis, customized sleeve was successfully prepared through the EBM-RP metal 3D printing technology, assembled with the standard handle component of SR modular femoral prosthesis to make the individualized femoral prosthesis. Customized femoral prosthesis accurately matching with metaphyseal cavity can be designed through the thin slice CT scanning and computer assisted design technology. Titanium alloy personalized prosthesis with complex 3D shape, pore surface, and good matching with metaphyseal cavity can be manufactured by the technology of EBM-RP metal 3D printing, and the technology has convenient, rapid, and accurate advantages.

New Styles, New Technologies, New Possibilities in Jazz.

ERIC Educational Resources Information Center

Kuzmich, John, Jr.

1989-01-01

Focuses on the growth of jazz-related ensembles and jazz education. Covers trends that parallel technological developments including electronic keyboards, Musical Instrument Digital Interface (MIDI) systems, the computer, computer assisted instruction, interactive video, and the compact disc. Urges teachers to update their knowledge and experience…

Usability of a Low-Cost Head Tracking Computer Access Method following Stroke.

PubMed

Mah, Jasmine; Jutai, Jeffrey W; Finestone, Hillel; Mckee, Hilary; Carter, Melanie

2015-01-01

Assistive technology devices for computer access can facilitate social reintegration and promote independence for people who have had a stroke. This work describes the exploration of the usefulness and acceptability of a new computer access device called the Nouse™ (Nose-as-mouse). The device uses standard webcam and video recognition algorithms to map the movement of the user's nose to a computer cursor, thereby allowing hands-free computer operation. Ten participants receiving in- or outpatient stroke rehabilitation completed a series of standardized and everyday computer tasks using the Nouse™ and then completed a device usability questionnaire. Task completion rates were high (90%) for computer activities only in the absence of time constraints. Most of the participants were satisfied with ease of use (70%) and liked using the Nouse™ (60%), indicating they could resume most of their usual computer activities apart from word-processing using the device. The findings suggest that hands-free computer access devices like the Nouse™ may be an option for people who experience upper motor impairment caused by stroke and are highly motivated to resume personal computing. More research is necessary to further evaluate the effectiveness of this technology, especially in relation to other computer access assistive technology devices.

English Language Teachers' Perceptions of Computer-Assisted Language Learning

ERIC Educational Resources Information Center

Feng, Yu Lin

2012-01-01

A growing number of studies have reported the potential use of computer-assisted language learning (CALL) and other types of technology for ESL and EFL students. So far, most studies on CALL have focused on CALL-classroom comparisons (Chenoweth & Murday, 2003; Chenoweth, Ushida, & Murday, 2007; Fitze, 2006; Neri, Mich, Gerosa, &…

Academic Achievement Enhanced by Personal Digital Assistant Use

ERIC Educational Resources Information Center

Bick, Alexander

2005-01-01

Research during the past decade suggests that integrating computing technology in general, and mobile computers in particular, into the educational environment has positive effects. This is the first long-term study of high school Personal Digital Assistant use. It involved three-parts, 146 students during four years. Part one found that PDA use…

Associations among Teachers' Attitudes towards Computer-Assisted Education and TPACK Competencies

ERIC Educational Resources Information Center

Baturay, Meltem Huri; Gökçearslan, Sahin; Sahin, Semsettin

2017-01-01

The current study investigates the attitudes of teachers towards Computer-Assisted Education (CAE) and their knowledge of technology, pedagogy and content via TPACK model that assesses the competencies for developing and implementing successful teaching. There were 280 participants in the study. The results of the study indicate that teachers'…

Gender-based Outcomes and Acceptability of a Computer-assisted Psychosocial Intervention for Substance Use Disorders.

PubMed

Campbell, Aimee N C; Nunes, Edward V; Pavlicova, Martina; Hatch-Maillette, Mary; Hu, Mei-Chen; Bailey, Genie L; Sugarman, Dawn E; Miele, Gloria M; Rieckmann, Traci; Shores-Wilson, Kathy; Turrigiano, Eva; Greenfield, Shelly F

2015-06-01

Digital technologies show promise for increasing treatment accessibility and improving quality of care, but little is known about gender differences. This secondary analysis uses data from a multi-site effectiveness trial of a computer-assisted behavioral intervention, conducted within NIDA's National Drug Abuse Clinical Trials Network, to explore gender differences in intervention acceptability and treatment outcomes. Men (n=314) and women (n=192) were randomly assigned to 12-weeks of treatment-as-usual (TAU) or modified TAU+Therapeutic Education System (TES), whereby TES substituted for 2hours of TAU per week. TES is composed of 62 Web-delivered, multimedia modules, covering skills for achieving and maintaining abstinence plus prize-based incentives contingent on abstinence and treatment adherence. Outcomes were: (1) abstinence from drugs and heavy drinking in the last 4weeks of treatment, (2) retention, (3) social functioning, and (4) drug and alcohol craving. Acceptability was the mean score across five indicators (i.e., interesting, useful, novel, easy to understand, and satisfaction). Gender did not moderate the effect of treatment on any outcome. Women reported higher acceptability scores at week 4 (p=.02), but no gender differences were detected at weeks 8 or 12. Acceptability was positively associated with abstinence, but only among women (p=.01). Findings suggest that men and women derive similar benefits from participating in a computer-assisted intervention, a promising outcome as technology-based treatments expand. Acceptability was associated with abstinence outcomes among women. Future research should explore characteristics of women who report less satisfaction with this modality of treatment and ways to improve overall acceptability. Copyright © 2015 Elsevier Inc. All rights reserved.

38 CFR 64.6 - Permissible uses of RVCP grants.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., devices, appliances, and assistive technology. (3) Providing assistance to families of transitioning... schools and/or child care programs; securing learning aids such as textbooks, computers and laboratory...

38 CFR 64.6 - Permissible uses of RVCP grants.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., devices, appliances, and assistive technology. (3) Providing assistance to families of transitioning... schools and/or child care programs; securing learning aids such as textbooks, computers and laboratory...

Simulation Packages Expand Aircraft Design Options

NASA Technical Reports Server (NTRS)

2013-01-01

In 2001, NASA released a new approach to computational fluid dynamics that allows users to perform automated analysis on complex vehicle designs. In 2010, Palo Alto, California-based Desktop Aeronautics acquired a license from Ames Research Center to sell the technology. Today, the product assists organizations in the design of subsonic aircraft, space planes, spacecraft, and high speed commercial jets.

A Project Management Perspective on Student's Declarative Commitments to Goals Established within Asynchronous Communication

ERIC Educational Resources Information Center

Chiocchio, F.; Lafreniere, A.

2009-01-01

Teamwork and technology, even as people are seeing their increased use in organizations, are becoming important components of problem-based learning in academic settings. Yet, fostering computer-assisted teamwork is complex and time consuming. Knowing how and when to intervene would prove useful. This study draws from the field of project…

Exploring Factors That Influence Technology-Based Distractions in Bring Your Own Device Classrooms

ERIC Educational Resources Information Center

Kay, Robin; Benzimra, Daniel; Li, Jia

2017-01-01

Previous research on distractions and the use of mobile devices (personal digital assistants, tablet personal computers, or laptops) have been conducted almost exclusively in higher education. The purpose of the current study was to examine the frequency and influence of distracting behaviors in Bring Your Own Device secondary school classrooms.…

Technology-Assisted Sheltered Instruction: Instructional Streaming Video in an EFL Multi-Purpose Computer Course

ERIC Educational Resources Information Center

Huang, Yun-Hsuan; Chuang, Tsung-Yen

2016-01-01

Content-based instruction (CBI) has been widely adopted for decades. However, existing CBI models cannot always be effectively put into practice, especially for learners of lower English proficiency in English as a foreign language (EFL) context. This study examined an animation design course adopting CBI to promote reading abilities of English…

"L2 Assessment and Testing" Teacher Education: An Exploration of Alternative Assessment Approaches Using New Technologies

ERIC Educational Resources Information Center

Papadima-Sophocleous, Salomi

2017-01-01

Most Second Language (L2) Teacher Training Assessment and Testing courses focus on testing. Through the development of a Master of Arts (MA) in a computer assisted language learning module (based on a constructivist and "practise what you preach" approach, entailing that the teachers experience firsthand the assessment types they were…

Technology To Enhance Special Education: Remediation of Problems in Logical Thinking and Memory. Final Report.

ERIC Educational Resources Information Center

Cavalier, Al; And Others

A federally sponsored project was designed to incorporate a memory-assessment task and a memory strategy into a computer-based instructional system for assessing and assisting in remediating basic memory-processing and metacognitive deficiencies. The project resulted in an instructional system for school-aged children and youth with mild to…

The Contribution of CALL to Advanced-Level Foreign/Second Language Instruction

ERIC Educational Resources Information Center

Burston, Jack; Arispe, Kelly

2016-01-01

This paper evaluates the contribution of instructional technology to advanced-level foreign/second language learning (AL2) over the past thirty years. It is shown that the most salient feature of AL2 practice and associated Computer-Assisted Language Learning (CALL) research are their rarity and restricted nature. Based on an analysis of four…

Linking CALL and SLA: Using the IRIS Database to Locate Research Instruments

ERIC Educational Resources Information Center

Handley, Zöe; Marsden, Emma

2014-01-01

To establish an evidence base for future computer-assisted language learning (CALL) design, CALL research needs to move away from CALL versus non-CALL comparisons, and focus on investigating the differential impact of individual coding elements, that is, specific features of a technology which might have an impact on learning (Pederson, 1987).…

"Earth, Sun and Moon": Computer Assisted Instruction in Secondary School Science--Achievement and Attitudes

ERIC Educational Resources Information Center

Ercan, Orhan; Bilen, Kadir; Ural, Evrim

2016-01-01

This study investigated the impact of a web-based teaching method on students' academic achievement and attitudes in the elementary education fifth grade Science and Technology unit, "System of Earth, Sun and Moon". The study was a quasi-experimental study with experimental and control groups comprising 54 fifth grade students attending…

Parallelized Seeded Region Growing Using CUDA

PubMed Central

Park, Seongjin; Lee, Hyunna; Seo, Jinwook; Lee, Kyoung Ho; Shin, Yeong-Gil; Kim, Bohyoung

2014-01-01

This paper presents a novel method for parallelizing the seeded region growing (SRG) algorithm using Compute Unified Device Architecture (CUDA) technology, with intention to overcome the theoretical weakness of SRG algorithm of its computation time being directly proportional to the size of a segmented region. The segmentation performance of the proposed CUDA-based SRG is compared with SRG implementations on single-core CPUs, quad-core CPUs, and shader language programming, using synthetic datasets and 20 body CT scans. Based on the experimental results, the CUDA-based SRG outperforms the other three implementations, advocating that it can substantially assist the segmentation during massive CT screening tests. PMID:25309619

An Intelligent Tutoring System for Antibody Identification

PubMed Central

Smith, Philip J.; Miller, Thomas E.; Fraser, Jane M.

1990-01-01

Empirical studies of medical technology students indicate that there is considerable need for additional skill development in performing tasks such as antibody identification. While this need is currently met by on-the-job training after employment, computer-based tutoring systems offer an alternative or supplemental problem-based learning environment that could be more cost effective. We have developed a prototype for such a tutoring system as part of a project to develop educational tools for the field of transfusion medicine. This system provides a microworld in which students can explore and solve cases, receiving assistance and tutoring from the computer as needed.

Technologies as Rural Special Education Problem Solvers--A Status Report and Successful Strategies.

ERIC Educational Resources Information Center

Helge, Doris

Rural schools can help solve their special education problems by using advanced technology to provide instructional support (computer managed instruction, satellite television, library searches, resource networks, on-line testing), instructional applications (computer assisted instruction, reading machines, mobile vans, instructional television),…

State Strategic Planning for Technology. Issuegram 38.

ERIC Educational Resources Information Center

McCune, Shirley

This brief publication provides general background on issues related to using microcomputers for instruction and suggests ways in which computer technologies can be included in state education improvement plans. Specific computer assisted instruction (CAI) uses mentioned are individual drill and practice and developing higher order skills. Three…

Technology skills assessment for deaf and hard of hearing students in secondary school.

PubMed

Luft, Pamela; Bonello, Mary; Zirzow, Nichole K

2009-01-01

To BE COMPETITIVE in the workplace, deaf and hard of hearing students must not only possess basic computer literacy but also know how to use and care for personal assistive and listening technology. An instrument was developed and pilot-tested on 45 middle school and high school deaf and hard of hearing students in 5 public school programs, 4 urban and 1 suburban, to assess these students' current technology skills and to prepare them for post-high school expectations. The researchers found that the students' computer skills depended on their access to technology, which was not always present in the schools. Many students also did not know basic care practices or troubleshooting techniques for their own personal hearing aids (if worn), or how to access or use personal assistive technology.

Intelligent Computer Assisted Instruction (ICAI): Formative Evaluation of Two Systems

DTIC Science & Technology

1986-03-01

appreciation .’.,-* for the power of computer technology. Interpretati on Yale students are a strikingly high performing group by traditional academic ...COMPUTER ASSISTED INSTRUCTION April 1984 - August 1985 (ICAI): FORMATIVE EVALUATION OF TWO SYSTEMS 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(*) S...956881 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA & WORK UNIT NUMBERS Jet Propulsion Laboratory 2Q263743A794

Report from a Multi-Institutional Randomized Clinical Trial Examining Computer-Assisted Problem-Solving Skills Training for English- and Spanish-Speaking Mothers of Children with Newly Diagnosed Cancer

PubMed Central

Sahler, Olle Jane Z.; Sherman, Sandra A.; Fairclough, Diane L.; Butler, Robert W.; Katz, Ernest R.; Dolgin, Michael J.; Varni, James W.; Noll, Robert B.; Phipps, Sean

2009-01-01

Objectives To evaluate the feasibility and efficacy of a handheld personal digital assistant (PDA)-based supplement for maternal Problem-Solving Skills Training (PSST) and to explore Spanish-speaking mothers’ experiences with it. Methods Mothers (n = 197) of children with newly diagnosed cancer were randomized to traditional PSST or PSST + PDA 8-week programs. Participants completed the Social Problem-Solving Inventory-Revised, Beck Depression Inventory-II, Profile of Mood States, and Impact of Event Scale-Revised pre-, post-treatment, and 3 months after completion of the intervention. Mothers also rated optimism, logic, and confidence in the intervention and technology. Results Both groups demonstrated significant positive change over time on all psychosocial measures. No between-group differences emerged. Despite technological “glitches,” mothers expressed moderately high optimism, appreciation for logic, and confidence in both interventions and rated the PDA-based program favorably. Technology appealed to all Spanish-speaking mothers, with younger mothers showing greater proficiency. Conclusions Well-designed, supported technology holds promise for enhancing psychological interventions. PMID:19091804

Silicon ribbon technology assessment 1978-1986 - A computer-assisted analysis using PECAN

NASA Technical Reports Server (NTRS)

Kran, A.

1978-01-01

The paper presents a 1978-1986 economic outlook for silicon ribbon technology based on the capillary action shaping technique. The outlook is presented within the framework of two sets of scenarios, which develop strategy for approaching the 1986 national energy capacity cost objective of $0.50/WE peak. The PECAN (Photovoltaic Energy Conversion Analysis) simulation technique is used to develop a 1986 sheet material price ($50/sq m) which apparently can be attained without further scientific breakthrough.

Current status and future prospects for enabling chemistry technology in the drug discovery process

PubMed Central

Djuric, Stevan W.; Hutchins, Charles W.; Talaty, Nari N.

2016-01-01

This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities. PMID:27781094

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2014 CFR

2014-01-01

... determining whether to continue, modify, or terminate an information technology program or project. (iii..., computer conferencing, televideo technologies, and other applications of office automation technology which... information technology system project managers in accordance with OMB policies. (D) Providing recommendations...

Teachers' Changing Roles in Computer Assisted Roles in Kenyan Secondary Schools

ERIC Educational Resources Information Center

Tanui, Edward K.; Kiboss, Joel K.; Walaba, Aggrey A.; Nassiuma, Dankit

2008-01-01

The use of computer technology in Kenyan schools is a relatively new approach that is currently being included in the school curriculum. The introduction of computer technology for use in teaching does not always seem to be accepted outright by most teachers. The purpose of the study reported in this paper was to investigate the teachers' changing…

Embedded Systems and TensorFlow Frameworks as Assistive Technology Solutions.

PubMed

Mulfari, Davide; Palla, Alessandro; Fanucci, Luca

2017-01-01

In the field of deep learning, this paper presents the design of a wearable computer vision system for visually impaired users. The Assistive Technology solution exploits a powerful single board computer and smart glasses with a camera in order to allow its user to explore the objects within his surrounding environment, while it employs Google TensorFlow machine learning framework in order to real time classify the acquired stills. Therefore the proposed aid can increase the awareness of the explored environment and it interacts with its user by means of audio messages.

Computer laboratory in medical education for medical students.

PubMed

Hercigonja-Szekeres, Mira; Marinović, Darko; Kern, Josipa

2009-01-01

Five generations of second year students at the Zagreb University School of Medicine were interviewed through an anonymous questionnaire on their use of personal computers, Internet, computer laboratories and computer-assisted education in general. Results show an advance in students' usage of information and communication technology during the period from 1998/99 to 2002/03. However, their positive opinion about computer laboratory depends on installed capacities: the better the computer laboratory technology, the better the students' acceptance and use of it.

34 CFR 607.10 - What activities may and may not be carried out under a grant?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., including the integration of computer technology into institutional facilities to create smart buildings... academic programs or methodology, including computer-assisted instruction, that strengthen the academic... new technology or methodology to increase student success and retention or to retain accreditation; or...

The President's Report, 1983-84.

ERIC Educational Resources Information Center

Bok, Derek

The 1983-84 annual report of the President of Harvard University to members of the Board of Overseers addresses the advantages and disadvantages of the utilization of new technologies by a university, comments on the instructional uses of computers (including computer assisted instruction (CAI)) and video technology, and cites specific examples in…

Assistive Technology for Every Child

ERIC Educational Resources Information Center

Boyd, Barbara Foulks

2008-01-01

The Montessori philosophy advocates that the classroom be a reflection of the home, the community, and the world. Now, a century after Maria Montessori founded her Casa dei Bambini, the world is becoming a high-technology society, with computers a part of everyday American lives. Computers are almost a household necessity, and basic…

CALL Essentials: Principles and Practice in CALL Classrooms

ERIC Educational Resources Information Center

Egbert, Joy

2005-01-01

Computers and the Internet offer innovative teachers exciting ways to enhance their pedagogy and capture their students' attention. These technologies have created a growing field of inquiry, computer-assisted language learning (CALL). As new technologies have emerged, teaching professionals have adapted them to support teachers and learners in…

Introduction to CAD/Computers. High-Technology Training Module.

ERIC Educational Resources Information Center

Lockerby, Hugh

This learning module for an eighth-grade introductory technology course is designed to help teachers introduce students to computer-assisted design (CAD) in a communications unit on graphics. The module contains a module objective and five specific objectives, a content outline, suggested instructor methodology, student activities, a list of six…

34 CFR 607.10 - What activities may and may not be carried out under a grant?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., including the integration of computer technology into institutional facilities to create smart buildings... academic programs or methodology, including computer-assisted instruction, that strengthen the academic... new technology or methodology to increase student success and retention or to retain accreditation; or...

The Impact of Computer-Assisted Instruction on Mathematics Achievement of Underachieving Fifth-Grade Students

ERIC Educational Resources Information Center

Bruce-Simmons, Christine

2013-01-01

This study examined the impact of computer-assisted instruction on the mathematics performance of underachieving fifth-grade students in a rural school district in South Carolina. The instructional technology program ([IF) is South Carolina's response to addressing the needs of its young, struggling math students. The 449 fifth-grade students in…

A Communication Device for Interfacing Slide/Audio Tape Programs with the Microcomputer for Computer-Assisted Self-Instruction.

ERIC Educational Resources Information Center

Hostetler, Jerry C.; Englert, Duwayne C.

1987-01-01

Presents description of an interface device which ties in microcomputers and slide/tape presentations for computer assisted instruction. Highlights include the use of this technology in an introductory undergraduate zoology course; a discussion of authoring languages with emphasis on SuperPILOT; and hardware and software design for the interface.…

Technology in the Service of Creativity: Computer Assisted Writing Project--Stetson Middle School, Philadelphia, Pennsylvania. Final Report.

ERIC Educational Resources Information Center

Bender, Evelyn

The American Library Association's Carroll Preston Baber Research Award supported this project on the use, impact and feasibility of a computer assisted writing facility located in the library of Stetson Middle School in Philadelphia, an inner city school with a population of minority, "at risk" students. The writing facility consisted…

Implementing Mobile-Assisted Language Learning (MALL) in an EFL Context: Iranian EFL Teachers' Perspectives on Challenges and Affordances

ERIC Educational Resources Information Center

Dashtestani, Reza

2013-01-01

The implementation of computer-assisted language learning (CALL) has provided tremendous opportunities for language teachers to promote their computer literacy and adopt a learner-centered approach to teaching. Accordingly, with the rising advent of language learning technologies, language teachers would occupy a fundamental role in preparing and…

School Technology Grows Up.

ERIC Educational Resources Information Center

Vail, Kathleen

2003-01-01

Practitioners and researchers in the education technology field asked to give their vision of the future list laptop computers, personal digital assistants, electronic testing, wireless networking, and multimedia technology among the technology advances headed soon for schools. A sidebar lists 12 online resources. (MLF)

45 CFR 263.13 - Is there a limit on the amount of Federal TANF funds that a State may spend on administrative costs?

Code of Federal Regulations, 2012 CFR

2012-10-01

... Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN...) Expenditures on the information technology and computerization needed for tracking and monitoring required by..., support or operate the portions of information technology or computer systems used for tracking and...

45 CFR 263.13 - Is there a limit on the amount of Federal TANF funds that a State may spend on administrative costs?

Code of Federal Regulations, 2010 CFR

2010-10-01

... Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN...) Expenditures on the information technology and computerization needed for tracking and monitoring required by..., support or operate the portions of information technology or computer systems used for tracking and...

45 CFR 263.13 - Is there a limit on the amount of Federal TANF funds that a State may spend on administrative costs?

Code of Federal Regulations, 2014 CFR

2014-10-01

... Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN...) Expenditures on the information technology and computerization needed for tracking and monitoring required by..., support or operate the portions of information technology or computer systems used for tracking and...

45 CFR 263.13 - Is there a limit on the amount of Federal TANF funds that a State may spend on administrative costs?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN...) Expenditures on the information technology and computerization needed for tracking and monitoring required by..., support or operate the portions of information technology or computer systems used for tracking and...

45 CFR 263.13 - Is there a limit on the amount of Federal TANF funds that a State may spend on administrative costs?

Code of Federal Regulations, 2013 CFR

2013-10-01

... Relating to Public Welfare OFFICE OF FAMILY ASSISTANCE (ASSISTANCE PROGRAMS), ADMINISTRATION FOR CHILDREN...) Expenditures on the information technology and computerization needed for tracking and monitoring required by..., support or operate the portions of information technology or computer systems used for tracking and...

In Search of New Ideas, Research Findings, and Emerging Technologies? Here's Where To Find Them.

ERIC Educational Resources Information Center

Powell, Gary C.

There are many avenues available to computer-assisted instruction (CAI) practitioners and developers in search of access to new ideas, research findings, and emerging technologies that will assist them in developing CAI products. Seven such avenues are described in detail: (1) graduate student interns, who bring unique insights, theory, and…

Audiovisual Translation and Assistive Technology: Towards a Universal Design Approach for Online Education

ERIC Educational Resources Information Center

Patiniotaki, Emmanouela

2016-01-01

Audiovisual Translation (AVT) and Assistive Technology (AST) are two fields that share common grounds within accessibility-related research, yet they are rarely studied in combination. The reason most often lies in the fact that they have emerged from different disciplines, i.e. Translation Studies and Computer Science, making a possible combined…

Development of an Interactive Computer-Based Learning Strategy to Assist in Teaching Water Quality Modelling

ERIC Educational Resources Information Center

Zigic, Sasha; Lemckert, Charles J.

2007-01-01

The following paper presents a computer-based learning strategy to assist in introducing and teaching water quality modelling to undergraduate civil engineering students. As part of the learning strategy, an interactive computer-based instructional (CBI) aid was specifically developed to assist students to set up, run and analyse the output from a…

Headless spermatozoa in infertile men.

PubMed

Sha, Y-W; Ding, L; Wu, J-X; Lin, S-B; Wang, X; Ji, Z-Y; Li, P

2017-10-01

Spermatozoa morphology, an important parameter in a semen specimen's potential fertility evaluation, is a significant factor for in vitro fertilisation in assisted reproductive technology. Eleven sterile men with headless spermatozoa, a type of human teratozoospermia, are presented. Their ejaculates' headless spermatozoa percentages were high with rare normal spermatozoa forms. Additionally, abnormal morphology (e.g. round-headed or microcephalic spermatozoa) was also found. Spermatozoa motility was somewhat affected, potentially because of the missing mitochondrial sheath at the sperm tail base. Patients who underwent assisted reproductive technology treatment experienced adverse pregnancy outcomes. Work types and corresponding environments seemed irrelevant, but specific family history may have prompted its genetic origin. Computer-assisted semen analysis systems easily mistake headless spermatozoa as oligozoospermia because of nonrecognition of the loose head. However, morphological testing, especially with an electronic microscope, clearly identifies abnormal spermatozoa. Future exploration requires more methods investigating the frequency and percentage of this morphological abnormality in different populations with varied fertility levels. Such research would estimate the probable correlation of the abnormality with other semen parameters and examine the potential developmental or genetic origins. During clinical work, medical staff should detect these cases, avoid misdiagnosis and provide proper consultation about diagnosis and assisted reproductive technology treatment. © 2016 Blackwell Verlag GmbH.

The Evolution of Computer-Assisted Total Hip Arthroplasty and Relevant Applications

PubMed Central

Kim, In-Sung; Bhardwaj, Atul M.; Badami, Ramachandra N.

2017-01-01

In total hip arthroplasty (THA), the accurate positioning of implants is the key to achieve a good clinical outcome. Computer-assisted orthopaedic surgery (CAOS) has been developed for more accurate positioning of implants during the THA. There are passive, semi-active, and active systems in CAOS for THA. Navigation is a passive system that only provides information and guidance to the surgeon. There are 3 types of navigation: imageless navigation, computed tomography (CT)-based navigation, and fluoroscopy-based navigation. In imageless navigation system, a new method of registration without the need to register the anterior pelvic plane was introduced. CT-based navigation can be efficiently used for pelvic plane reference, the functional pelvic plane in supine which adjusts anterior pelvic plane sagittal tilt for targeting the cup orientation. Robot-assisted system can be either active or semi-active. The active robotic system performs the preparation for implant positioning as programmed preoperatively. It has been used for only femoral implant cavity preparation. Recently, program for cup positioning was additionally developed. Alternatively, for ease of surgeon acceptance, semi-active robot systems are developed. It was initially applied only for cup positioning. However, with the development of enhanced femoral workflows, this system can now be used to position both cup and stem. Though there have been substantial advancements in computer-assisted THA, its use can still be controversial at present due to the steep learning curve, intraoperative technical issues, high cost and etc. However, in the future, CAOS will certainly enable the surgeon to operate more accurately and lead to improved outcomes in THA as the technology continues to evolve rapidly. PMID:28316957

For What Conditions Are Assistive Devices Used?

MedlinePlus

... walking or other movement, inability to use a computer mouse, slow response time, limited fine or gross ... people with hidden disabilities can benefit from assistive technologies for certain activities or during certain stages of ...

Computers in mathematics: teacher-inservice training at a distance

NASA Astrophysics Data System (ADS)

Friedman, Edward A.; Jurkat, M. P.

1993-01-01

While research and experience show many advantages for incorporation of computer technology into secondary school mathematics instruction, less than 5 percent of the nation's teachers are actively using computers in their classrooms. This is the case even though mathematics teachers in grades 7 - 12 are often familiar with computer technology and have computers available to them in their schools. The implementation bottleneck is in-service teacher training and there are few models of effective implementation available for teachers to emulate. Stevens Institute of Technology has been active since 1988 in research and development efforts to incorporate computers into classroom use. We have found that teachers need to see examples of classroom experience with hardware and software and they need to have assistance as they experiment with applications of software and the development of lesson plans. High-band width technology can greatly facilitate teacher training in this area through transmission of video documentaries, software discussions, teleconferencing, peer interactions, classroom observations, etc. We discuss the experience that Stevens has had with face-to-face teacher training as well as with satellite-based teleconferencing using one-way video and two- way audio. Included are reviews of analyses of this project by researchers from Educational Testing Service, Princeton University, and Bank Street School of Education.

Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review.

PubMed

Ewers, R; Schicho, K; Undt, G; Wanschitz, F; Truppe, M; Seemann, R; Wagner, A

2005-01-01

Computer-aided surgical navigation technology is commonly used in craniomaxillofacial surgery. It offers substantial improvement regarding esthetic and functional aspects in a range of surgical procedures. Based on augmented reality principles, where the real operative site is merged with computer generated graphic information, computer-aided navigation systems were employed, among other procedures, in dental implantology, arthroscopy of the temporomandibular joint, osteotomies, distraction osteogenesis, image guided biopsies and removals of foreign bodies. The decision to perform a procedure with or without computer-aided intraoperative navigation depends on the expected benefit to the procedure as well as on the technical expenditure necessary to achieve that goal. This paper comprises the experience gained in 12 years of research, development and routine clinical application. One hundred and fifty-eight operations with successful application of surgical navigation technology--divided into five groups--are evaluated regarding the criteria "medical benefit" and "technical expenditure" necessary to perform these procedures. Our results indicate that the medical benefit is likely to outweight the expenditure of technology with few exceptions (calvaria transplant, resection of the temporal bone, reconstruction of the orbital floor). Especially in dental implantology, specialized software reduces time and additional costs necessary to plan and perform procedures with computer-aided surgical navigation.

Gaze-Based Assistive Technology - Usefulness in Clinical Assessments.

PubMed

Wandin, Helena

2017-01-01

Gaze-based assistive technology was used in informal clinical assessments. Excerpts of medical journals were analyzed by directed content analysis using a model of communicative competence. The results of this pilot study indicate that gaze-based assistive technology is a useful tool in communication assessments that can generate clinically relevant information.

Educational Technology Program. Quarterly Technical Summary Report, 1 December 1971-29 February 1972.

ERIC Educational Resources Information Center

Frick, Frederick C.

The Lincoln Training System (LTS-3) is a computer-assisted instructional system for training Air Traffic Controllers and Basic Electronic students in the United States Air Force. This document describes the components of the system prior to its initial field trial in mid-April 1972 at Kessler Air Force Base. The system is made up of 14 Basic…

An Empirical Examination of EFL Learners' Perceptual Learning Styles and Acceptance of ASR-Based Computer-Assisted Pronunciation Training

ERIC Educational Resources Information Center

Hsu, Liwei

2016-01-01

This study aims to explore the structural relationships among the variables of EFL (English as a foreign language) learners' perceptual learning styles and Technology Acceptance Model (TAM). Three hundred and forty-one (n = 341) EFL learners were invited to join a self-regulated English pronunciation training program through automatic speech…

Changing Manufacturing Technology and Jobs in Defense Industries.

ERIC Educational Resources Information Center

Oliver, Richard P.

1983-01-01

Provides information on the current status of computer-assisted manufacturing, current employment, and plans for new technology in three defense-related industries: aircraft, shipbuilding, and ordnance. (SK)

Teachers' Experiences of Using Eye Gaze-Controlled Computers for Pupils with Severe Motor Impairments and without Speech

ERIC Educational Resources Information Center

Rytterström, Patrik; Borgestig, Maria; Hemmingsson, Helena

2016-01-01

The purpose of this study is to explore teachers' experiences of using eye gaze-controlled computers with pupils with severe disabilities. Technology to control a computer with eye gaze is a fast growing field and has promising implications for people with severe disabilities. This is a new assistive technology and a new learning situation for…

Automatic speech recognition and training for severely dysarthric users of assistive technology: the STARDUST project.

PubMed

Parker, Mark; Cunningham, Stuart; Enderby, Pam; Hawley, Mark; Green, Phil

2006-01-01

The STARDUST project developed robust computer speech recognizers for use by eight people with severe dysarthria and concomitant physical disability to access assistive technologies. Independent computer speech recognizers trained with normal speech are of limited functional use by those with severe dysarthria due to limited and inconsistent proximity to "normal" articulatory patterns. Severe dysarthric output may also be characterized by a small mass of distinguishable phonetic tokens making the acoustic differentiation of target words difficult. Speaker dependent computer speech recognition using Hidden Markov Models was achieved by the identification of robust phonetic elements within the individual speaker output patterns. A new system of speech training using computer generated visual and auditory feedback reduced the inconsistent production of key phonetic tokens over time.

The Imagination Machines. An Explanation of the Role of Computer Technology in Arts Education and the Impact of the Arts on New Electronic Learning Tools. [Videotape.

ERIC Educational Resources Information Center

1991

Narrated by actor Kadeem Hardison, this documentary videotape presents arguments and examples for using Computer Assisted Instruction (CAI) in today's classroom. Experts in education examine how individuals currently use technology and suggest how people can use technology better in the future to augment and improve education. Many programs are…

Digital video technology, today and tomorrow

NASA Astrophysics Data System (ADS)

Liberman, J.

1994-10-01

Digital video is probably computing's fastest moving technology today. Just three years ago, the zenith of digital video technology on the PC was the successful marriage of digital text and graphics with analog audio and video by means of expensive analog laser disc players and video overlay boards. The state of the art involves two different approaches to fully digital video on computers: hardware-assisted and software-only solutions.

Slicing for Biology.

ERIC Educational Resources Information Center

Ekstrom, James

2001-01-01

Advocates using computer imaging technology to assist students in doing projects in which determining density is important. Students can study quantitative comparisons of masses, lengths, and widths using computer software. Includes figures displaying computer images of shells, yeast cultures, and the Aral Sea. (SAH)

Using Text-to-Speech (TTS) for Audio Computer-Assisted Self-Interviewing (ACASI)

ERIC Educational Resources Information Center

Couper, Mick P.; Berglund, Patricia; Kirgis, Nicole; Buageila, Sarrah

2016-01-01

We evaluate the use of text-to-speech (TTS) technology for audio computer-assisted self-interviewing (ACASI). We use a quasi-experimental design, comparing the use of recorded human voice in the 2006-2010 National Survey of Family Growth with the use of TTS in the first year of the 2011-2013 survey, where the essential survey conditions are…

The Path to English Literacy: Analyzing Elementary Sight Word Procurement Using Computer Assisted Language Learning (CALL) in Contrast to Traditional Methodologies

ERIC Educational Resources Information Center

Madill, Michael T. R.

2014-01-01

Didactical approaches related to teaching English as a Foreign Language (EFL) have developed into a complex array of instructional methodologies, each having potential benefits attributed to elementary reading development. One such effective practice is Computer Assisted Language Learning (CALL), which uses various forms of technology such as…

Computer Assisted Assignment of Students to Schools to Achieve Desegregation.

ERIC Educational Resources Information Center

Illinois Inst. of Tech., Chicago. Research Inst.

To help school districts with the task of assigning students to schools in order to achieve desegregation, the Illinois Institute of Technology has developed a system involving the use of planning techniques and computer technology that greatly simplifies the school district's job. The key features of the system are objectivity, minimum…

The Future's Future: Implications of Emerging Technology for Special Education Program Planning.

ERIC Educational Resources Information Center

Hofstetter, Fred T.

2001-01-01

This article reviews emerging technologies, imagines how they can be used to help learners with special needs, and recommends new special education program initiatives to help these students make a meaningful transition from school to work. Wearable computers, personal computing devices, DVD, HDTV, MP3, and personal digital assistants are…

Development of a computer-assisted learning software package on dental traumatology.

PubMed

Tolidis, K; Crawford, P; Stephens, C; Papadogiannis, Y; Plakias, C

1998-10-01

The development of computer-assisted learning software packages is a relatively new field of computer application. The progress made in personal computer technology toward more user-friendly operating systems has stimulated the academic community to develop computer-assisted learning for pre- and postgraduate students. The ability of computers to combine audio and visual data in an interactive form provides a powerful educational tool. The purpose of this study was to develop and evaluate a computer-assisted learning package on dental traumatology. This program contains background information on the diagnosis, classification, and management of dental injuries in both the permanent and the deciduous dentitions. It is structured into chapters according to the nature of the injury and whether injury has occurred in the primary or permanent dentition. At the end of each chapter there is a self-assessment questionnaire as well as references to relevant literature. Extensive use of pictures and video provides a comprehensive overview of the subject.

Systematic Review of Studies Promoting the Use of Assistive Technology Devices by Young Children with Disabilities. Practical Evaluation Reports, Volume 5, Number 1

ERIC Educational Resources Information Center

Dunst, Carl J.; Trivette, Carol M.; Hamby, Deborah W.; Simkus, Andrew

2013-01-01

Findings from a meta-analysis of studies investigating the use of five different assistive technology devices (switch interfaces, powered mobility, computers, augmentative communication, weighted/pressure vests) with young children with disabilities are reported. One hundred and nine studies including 1,342 infants, toddlers, and preschoolers were…

The Lenovo X-60 Convertible Notebook Tablet PC: An Assistive Technology Tool Review

ERIC Educational Resources Information Center

Harvey-Carter, Liz

2007-01-01

The purpose of this paper is to examine the suitability of the newest generation of Lenovo X60 tablet personal computers (PCs) as assistive technology (AT) devices for students with disabilities. Because of the vast selection of tablet PCs and convertible notebooks currently available on the market, this paper will confine itself to assessing one…

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2011 CFR

2011-01-01

... continue, modify, or terminate an information technology program or project. (iii) Provide advice and other... exchange, scheduling, computer conferencing, televideo technologies, and other applications of office... Chief Information Officers and agency major information technology system project managers in accordance...

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2012 CFR

2012-01-01

... continue, modify, or terminate an information technology program or project. (iii) Provide advice and other... exchange, scheduling, computer conferencing, televideo technologies, and other applications of office... Chief Information Officers and agency major information technology system project managers in accordance...

Virtual transplantation in designing a facial prosthesis for extensive maxillofacial defects that cross the facial midline using computer-assisted technology.

PubMed

Feng, Zhi-hong; Dong, Yan; Bai, Shi-zhu; Wu, Guo-feng; Bi, Yun-peng; Wang, Bo; Zhao, Yi-min

2010-01-01

The aim of this article was to demonstrate a novel approach to designing facial prostheses using the transplantation concept and computer-assisted technology for extensive, large, maxillofacial defects that cross the facial midline. The three-dimensional (3D) facial surface images of a patient and his relative were reconstructed using data obtained through optical scanning. Based on these images, the corresponding portion of the relative's face was transplanted to the patient's where the defect was located, which could not be rehabilitated using mirror projection, to design the virtual facial prosthesis without the eye. A 3D model of an artificial eye that mimicked the patient's remaining one was developed, transplanted, and fit onto the virtual prosthesis. A personalized retention structure for the artificial eye was designed on the virtual facial prosthesis. The wax prosthesis was manufactured through rapid prototyping, and the definitive silicone prosthesis was completed. The size, shape, and cosmetic appearance of the prosthesis were satisfactory and matched the defect area well. The patient's facial appearance was recovered perfectly with the prosthesis, as determined through clinical evaluation. The optical 3D imaging and computer-aided design/computer-assisted manufacturing system used in this study can design and fabricate facial prostheses more precisely than conventional manual sculpturing techniques. The discomfort generally associated with such conventional methods was decreased greatly. The virtual transplantation used to design the facial prosthesis for the maxillofacial defect, which crossed the facial midline, and the development of the retention structure for the eye were both feasible.

[The history and development of computer assisted orthopaedic surgery].

PubMed

Jenny, J-Y

2006-10-01

Computer assisted orthopaedic surgery (CAOS) was developed to improve the accuracy of surgical procedures. It has improved dramatically over the last years, being transformed from an experimental, laboratory procedure into a routine procedure theoretically available to every orthopaedic surgeon. The first field of application of computer assistance was neurosurgery. After the application of computer guided spinal surgery, the navigation of total hip and knee joints became available. Currently, several applications for computer assisted surgery are available. At the beginning of navigation, a preoperative CT-scan or several fluoroscopic images were necessary. The imageless systems allow the surgeon to digitize patient anatomy at the beginning of surgery without any preoperative imaging. The future of CAOS remains unknown, but there is no doubt that its importance will grow in the next 10 years, and that this technology will probably modify the conventional practice of orthopaedic surgery.

45 CFR 233.35 - Computing the assistance payment under retrospective budgeting after the initial one or two...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Computing the assistance payment under... FINANCIAL ASSISTANCE PROGRAMS § 233.35 Computing the assistance payment under retrospective budgeting after... shall be computed retrospectively, i.e., shall be based on income and other relevant circumstances in...

Enhancing reading abilities of learners with intellectual impairments through computer technology

PubMed Central

Warnick, Albert M.

2017-01-01

Background Developments in the teaching of children with disabilities support pedagogy that emphasises learners’ strengths as opposed to their assumed deficiencies. Educators and mediators who advocate this view continually strive for tools and methodologies that enhance learner participation in academic environments. Computer technology is one of the tools recognised for its potential to enrich learning experiences of learners with an intellectual impairment. Objectives We sought to assess the influence of text-to-speech stories on the reading ability of intellectually challenged learners. Method A qualitative action research study that involves learners at a special school in Cape Town, South Africa. Pre- and post-test data of the reading performance of learners are analysed with a focus on how they demonstrate change. Results Although no claims can be made about the explicit influence on reading performance, computer-assisted learning has the potential in isolating reading processes that classroom-based interventions can address. In addition, computers enhance motivation and enthusiasm to learn. Conclusion A need for education based on inclusion and positive differentiation remains the key driver in any educational interventions. PMID:28951849

Ubiquitous Accessibility for People with Visual Impairments: Are We There Yet?

PubMed Central

Billah, Syed Masum; Ashok, Vikas; Porter, Donald E.; Ramakrishnan, IV

2017-01-01

Ubiquitous access is an increasingly common vision of computing, wherein users can interact with any computing device or service from anywhere, at any time. In the era of personal computing, users with visual impairments required special-purpose, assistive technologies, such as screen readers, to interact with computers. This paper investigates whether technologies like screen readers have kept pace with, or have created a barrier to, the trend toward ubiquitous access, with a specific focus on desktop computing as this is still the primary way computers are used in education and employment. Towards that, the paper presents a user study with 21 visually-impaired participants, specifically involving the switching of screen readers within and across different computing platforms, and the use of screen readers in remote access scenarios. Among the findings, the study shows that, even for remote desktop access—an early forerunner of true ubiquitous access—screen readers are too limited, if not unusable. The study also identifies several accessibility needs, such as uniformity of navigational experience across devices, and recommends potential solutions. In summary, assistive technologies have not made the jump into the era of ubiquitous access, and multiple, inconsistent screen readers create new practical problems for users with visual impairments. PMID:28782061

Ubiquitous Accessibility for People with Visual Impairments: Are We There Yet?

PubMed

Billah, Syed Masum; Ashok, Vikas; Porter, Donald E; Ramakrishnan, I V

2017-05-01

Ubiquitous access is an increasingly common vision of computing, wherein users can interact with any computing device or service from anywhere, at any time. In the era of personal computing, users with visual impairments required special-purpose, assistive technologies, such as screen readers, to interact with computers. This paper investigates whether technologies like screen readers have kept pace with, or have created a barrier to, the trend toward ubiquitous access, with a specific focus on desktop computing as this is still the primary way computers are used in education and employment. Towards that, the paper presents a user study with 21 visually-impaired participants, specifically involving the switching of screen readers within and across different computing platforms, and the use of screen readers in remote access scenarios. Among the findings, the study shows that, even for remote desktop access-an early forerunner of true ubiquitous access-screen readers are too limited, if not unusable. The study also identifies several accessibility needs, such as uniformity of navigational experience across devices, and recommends potential solutions. In summary, assistive technologies have not made the jump into the era of ubiquitous access, and multiple, inconsistent screen readers create new practical problems for users with visual impairments.

Introduction to Computer Aided Instruction in the Language Laboratory.

ERIC Educational Resources Information Center

Hughett, Harvey L.

The first half of this book focuses on the rationale, ideas, and information for the use of technology, including microcomputers, to improve language teaching efficiency. Topics discussed include foreign language computer assisted instruction (CAI), hardware and software selection, computer literacy, educational computing organizations, ease of…

A perspective on intelligent devices and environments in medical rehabilitation.

PubMed

Cooper, Rory A; Dicianno, Brad E; Brewer, Bambi; LoPresti, Edmund; Ding, Dan; Simpson, Richard; Grindle, Garrett; Wang, Hongwu

2008-12-01

Globally, the number of people older than 65 years is anticipated to double between 1997 and 2025, while at the same time the number of people with disabilities is growing at a similar rate, which makes technical advances and social policies critical to attain, prolong, and preserve quality of life. Recent advancements in technology, including computation, robotics, machine learning, communication, and miniaturization of sensors have been used primarily in manufacturing, military, space exploration, and entertainment. However, few efforts have been made to utilize these technologies to enhance the quality of life of people with disabilities. This article offers a perspective of future development in seven emerging areas: translation of research into clinical practice, pervasive assistive technology, cognitive assistive technologies, rehabilitation monitoring and coaching technologies, robotic assisted therapy, and personal mobility and manipulation technology.

[Basic concept in computer assisted surgery].

PubMed

Merloz, Philippe; Wu, Hao

2006-03-01

To investigate application of medical digital imaging systems and computer technologies in orthopedics. The main computer-assisted surgery systems comprise the four following subcategories. (1) A collection and recording process for digital data on each patient, including preoperative images (CT scans, MRI, standard X-rays), intraoperative visualization (fluoroscopy, ultrasound), and intraoperative position and orientation of surgical instruments or bone sections (using 3D localises). Data merging based on the matching of preoperative imaging (CT scans, MRI, standard X-rays) and intraoperative visualization (anatomical landmarks, or bone surfaces digitized intraoperatively via 3D localiser; intraoperative ultrasound images processed for delineation of bone contours). (2) In cases where only intraoperative images are used for computer-assisted surgical navigation, the calibration of the intraoperative imaging system replaces the merged data system, which is then no longer necessary. (3) A system that provides aid in decision-making, so that the surgical approach is planned on basis of multimodal information: the interactive positioning of surgical instruments or bone sections transmitted via pre- or intraoperative images, display of elements to guide surgical navigation (direction, axis, orientation, length and diameter of a surgical instrument, impingement, etc. ). And (4) A system that monitors the surgical procedure, thereby ensuring that the optimal strategy defined at the preoperative stage is taken into account. It is possible that computer-assisted orthopedic surgery systems will enable surgeons to better assess the accuracy and reliability of the various operative techniques, an indispensable stage in the optimization of surgery.

Secure remote access to a clinical data repository using a wireless personal digital assistant (PDA).

PubMed

Duncan, R G; Shabot, M M

2000-01-01

TCP/IP and World-Wide-Web (WWW) technology have become the universal standards for networking and delivery of information. Personal digital assistants (PDAs), cellular telephones, and alphanumeric pagers are rapidly converging on a single pocket device that will leverage wireless TCP/IP networks and WWW protocols and can be used to deliver clinical information and alerts anytime, anywhere. We describe a wireless interface to clinical information for physicians based on Palm Corp.'s Palm VII pocket computer, a wireless digital network, encrypted data transmission, secure web servers, and a clinical data repository (CDR).

Secure remote access to a clinical data repository using a wireless personal digital assistant (PDA).

PubMed Central

Duncan, R. G.; Shabot, M. M.

2000-01-01

TCP/IP and World-Wide-Web (WWW) technology have become the universal standards for networking and delivery of information. Personal digital assistants (PDAs), cellular telephones, and alphanumeric pagers are rapidly converging on a single pocket device that will leverage wireless TCP/IP networks and WWW protocols and can be used to deliver clinical information and alerts anytime, anywhere. We describe a wireless interface to clinical information for physicians based on Palm Corp.'s Palm VII pocket computer, a wireless digital network, encrypted data transmission, secure web servers, and a clinical data repository (CDR). PMID:11079875

From computer-assisted intervention research to clinical impact: The need for a holistic approach.

PubMed

Ourselin, Sébastien; Emberton, Mark; Vercauteren, Tom

2016-10-01

The early days of the field of medical image computing (MIC) and computer-assisted intervention (CAI), when publishing a strong self-contained methodological algorithm was enough to produce impact, are over. As a community, we now have substantial responsibility to translate our scientific progresses into improved patient care. In the field of computer-assisted interventions, the emphasis is also shifting from the mere use of well-known established imaging modalities and position trackers to the design and combination of innovative sensing, elaborate computational models and fine-grained clinical workflow analysis to create devices with unprecedented capabilities. The barriers to translating such devices in the complex and understandably heavily regulated surgical and interventional environment can seem daunting. Whether we leave the translation task mostly to our industrial partners or welcome, as researchers, an important share of it is up to us. We argue that embracing the complexity of surgical and interventional sciences is mandatory to the evolution of the field. Being able to do so requires large-scale infrastructure and a critical mass of expertise that very few research centres have. In this paper, we emphasise the need for a holistic approach to computer-assisted interventions where clinical, scientific, engineering and regulatory expertise are combined as a means of moving towards clinical impact. To ensure that the breadth of infrastructure and expertise required for translational computer-assisted intervention research does not lead to a situation where the field advances only thanks to a handful of exceptionally large research centres, we also advocate that solutions need to be designed to lower the barriers to entry. Inspired by fields such as particle physics and astronomy, we claim that centralised very large innovation centres with state of the art technology and health technology assessment capabilities backed by core support staff and open interoperability standards need to be accessible to the wider computer-assisted intervention research community. Copyright © 2016. Published by Elsevier B.V.

Educational Technology: Integration?

ERIC Educational Resources Information Center

Christensen, Dean L.; Tennyson, Robert D.

This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

Why Information Technologies Fail.

ERIC Educational Resources Information Center

Gayeski, Diane M.

1989-01-01

Discusses successes and failures in the field of instructional technology and suggests methods to design more appropriate systems that would present fewer barriers to adoption. Topics discussed include educational television; videotext; video technology; audiovisual aids; teleconferencing; computer assisted instruction; interactive video; CD-ROM;…

A Delphi Forecast of Technology in Education.

ERIC Educational Resources Information Center

Robinson, Burke E.

The forecast reported here surveys expected utilization levels, organizational structures, and values concerning technology in education in 1990. The focus is upon educational technology and forecasting methodology; televised instruction, computer-assisted instruction (CAI), and information services are considered. The methodology employed…

Computer-assisted qualitative data analysis software.

PubMed

Cope, Diane G

2014-05-01

Advances in technology have provided new approaches for data collection methods and analysis for researchers. Data collection is no longer limited to paper-and-pencil format, and numerous methods are now available through Internet and electronic resources. With these techniques, researchers are not burdened with entering data manually and data analysis is facilitated by software programs. Quantitative research is supported by the use of computer software and provides ease in the management of large data sets and rapid analysis of numeric statistical methods. New technologies are emerging to support qualitative research with the availability of computer-assisted qualitative data analysis software (CAQDAS).CAQDAS will be presented with a discussion of advantages, limitations, controversial issues, and recommendations for this type of software use.

Self-learning computers for surgical planning and prediction of postoperative alignment.

PubMed

Lafage, Renaud; Pesenti, Sébastien; Lafage, Virginie; Schwab, Frank J

2018-02-01

In past decades, the role of sagittal alignment has been widely demonstrated in the setting of spinal conditions. As several parameters can be affected, identifying the driver of the deformity is the cornerstone of a successful treatment approach. Despite the importance of restoring sagittal alignment for optimizing outcome, this task remains challenging. Self-learning computers and optimized algorithms are of great interest in spine surgery as in that they facilitate better planning and prediction of postoperative alignment. Nowadays, computer-assisted tools are part of surgeons' daily practice; however, the use of such tools remains to be time-consuming. NARRATIVE REVIEW AND RESULTS: Computer-assisted methods for the prediction of postoperative alignment consist of a three step analysis: identification of anatomical landmark, definition of alignment objectives, and simulation of surgery. Recently, complex rules for the prediction of alignment have been proposed. Even though this kind of work leads to more personalized objectives, the number of parameters involved renders it difficult for clinical use, stressing the importance of developing computer-assisted tools. The evolution of our current technology, including machine learning and other types of advanced algorithms, will provide powerful tools that could be useful in improving surgical outcomes and alignment prediction. These tools can combine different types of advanced technologies, such as image recognition and shape modeling, and using this technique, computer-assisted methods are able to predict spinal shape. The development of powerful computer-assisted methods involves the integration of several sources of information such as radiographic parameters (X-rays, MRI, CT scan, etc.), demographic information, and unusual non-osseous parameters (muscle quality, proprioception, gait analysis data). In using a larger set of data, these methods will aim to mimic what is actually done by spine surgeons, leading to real tailor-made solutions. Integrating newer technology can change the current way of planning/simulating surgery. The use of powerful computer-assisted tools that are able to integrate several parameters and learn from experience can change the traditional way of selecting treatment pathways and counseling patients. However, there is still much work to be done to reach a desired level as noted in other orthopedic fields, such as hip surgery. Many of these tools already exist in non-medical fields and their adaptation to spine surgery is of considerable interest.

Design of testbed and emulation tools

NASA Technical Reports Server (NTRS)

Lundstrom, S. F.; Flynn, M. J.

1986-01-01

The research summarized was concerned with the design of testbed and emulation tools suitable to assist in projecting, with reasonable accuracy, the expected performance of highly concurrent computing systems on large, complete applications. Such testbed and emulation tools are intended for the eventual use of those exploring new concurrent system architectures and organizations, either as users or as designers of such systems. While a range of alternatives was considered, a software based set of hierarchical tools was chosen to provide maximum flexibility, to ease in moving to new computers as technology improves and to take advantage of the inherent reliability and availability of commercially available computing systems.

Full-Screen Magnification on a Budget: Using a Hardware-Based Multi-Display Graphics Card as a Screen-Magnifier

ERIC Educational Resources Information Center

Sales, Anthony; Evans, Shirley; Musgrove, Nick; Homfray, Richard

2006-01-01

Potentially, computers can balance some of the effects of visual impairment and provide equality of opportunity (Gerber, 2003). Students' individual needs entail that they and their teachers have access to a range of assistive technologies that may vary according to the task as well as to the learner. A dual output graphics card with a twin…

Computer-Assisted Language Learning: Current Programs and Projects. ERIC Digest.

ERIC Educational Resources Information Center

Higgins, Chris

For many years, foreign language teachers have used the computer to provide supplemental exercises in the instruction of foreign languages. In recent years, advances in computer technology have motivated teachers to reassess the computer and consider it a valuable part of daily foreign language learning. Innovative software programs, authoring…

Opportunities and Needs for Mobile-Computing Technology to Support U.S. Geological Survey Fieldwork

USGS Publications Warehouse

Wood, Nathan J.; Halsing, David L.

2006-01-01

To assess the opportunities and needs for mobile-computing technology at the U.S. Geological Survey (USGS), we conducted an internal, Internet-based survey of bureau scientists whose research includes fieldwork. In summer 2005, 144 survey participants answered 65 questions about fieldwork activities and conditions, technology to support field research, and postfieldwork data processing and analysis. Results suggest that some types of mobile-computing technology are already commonplace, such as digital cameras and Global Positioning System (GPS) receivers, whereas others are not, such as personal digital assistants (PDAs) and tablet-based personal computers (tablet PCs). The potential for PDA use in the USGS is high: 97 percent of respondents record field observations (primarily environmental conditions and water-quality data), and 87 percent take field samples (primarily water-quality data, water samples, and sediment/soil samples). The potential for tablet PC use in the USGS is also high: 59 percent of respondents map environmental features in the field, primarily by sketching in field notebooks, on aerial photographs, or on topographic-map sheets. Results also suggest that efficient mobile-computing-technology solutions could benefit many USGS scientists because most respondents spend at least 1 week per year in the field, conduct field sessions that are least 1 week in duration, have field crews of one to three people, and typically travel on foot about 1 mi from their field vehicles. By allowing researchers to enter data directly into digital databases while in the field, mobile-computing technology could also minimize postfieldwork data processing: 93 percent of respondents enter collected field data into their office computers, and more than 50 percent spend at least 1 week per year on postfieldwork data processing. Reducing postfieldwork data processing could free up additional time for researchers and result in cost savings for the bureau. Generally, respondents support greater use of mobile-computing technology at the USGS and are interested in training opportunities and further discussions related to data archiving, access to additional digital data types, and technology development.

Computer-assisted virtual technology in intracapsular condylar fracture with two resorbable long-screws.

PubMed

Wang, W H; Deng, J Y; Zhu, J; Li, M; Xia, B; Xu, B

2013-03-01

Our aim was to fix intracapsular condylar fractures (ICF) with two resorbable long screws using preoperative computer-assisted virtual technology. From February 2008 to July 2011, 19 patients with ICF were treated with two resorbable long screws. Preoperatively we took panoramic radiographs and spiral computed tomography (CT). Depending on their digital imaging and communications in medicine (DICOM) data, the dislocated condylar segments were restored using the SimPlant Pro™ software, version 11.04. The mean (SD) widths of the condylar head and neck from lateral to medial were 19.01 (1.28)mm and 13.84 (1.13)mm, respectively. In all patients, the mandibles and the ICF seen intraoperatively corresponded with the preoperative three-dimensional and virtual reposition. All patients were followed up for 6-46 months (mean 21). Occlusion and mouth opening had been restored completely in all but one patient, and absolute anatomical reduction was also achieved in most cases. Computer-assisted virtual technology plays an important part in the diagnosis of ICF, as well as in its preoperative design. Fixation with only two resorbable long screws is an effective and reliable method for fixing ICF. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

PDAs in Teacher Education: A Case Study Examining Mobile Technology Integration

ERIC Educational Resources Information Center

Franklin, Teresa; Sexton, Colleen; Lu, Young; Ma, Hongyan

2007-01-01

The classroom computer is no longer confined to a box on the desk. Mobile handheld computing devices have evolved into powerful and affordable learning tools. Handheld technologies are changing the way people access and work with information. The use of Personal Digital Assistants (PDAs or handhelds) has been an evolving part of the business world…

Computer Assisted Navigation in Knee Arthroplasty

PubMed Central

Bae, Dae Kyung

2011-01-01

Computer assisted surgery (CAS) was used to improve the positioning of implants during total knee arthroplasty (TKA). Most studies have reported that computer assisted navigation reduced the outliers of alignment and component malpositioning. However, additional sophisticated studies are necessary to determine if the improvement of alignment will improve long-term clinical results and increase the survival rate of the implant. Knowledge of CAS-TKA technology and understanding the advantages and limitations of navigation are crucial to the successful application of the CAS technique in TKA. In this article, we review the components of navigation, classification of the system, surgical method, potential error, clinical results, advantages, and disadvantages. PMID:22162787

The Future of Work: Technology Beckons

ERIC Educational Resources Information Center

Donlevy, Jim

2005-01-01

In the schools, each day, teachers see cell phones, laptops, iPods, personal digital assistants, computer games and more. They are struggling to cope with this technological profusion as new devices seem to appear almost daily. With the pace of technological change, the emergence of new technologies, demographic changes and trends towards…

Self-Regulated Out-of-Class Language Learning with Technology

ERIC Educational Resources Information Center

Lai, Chun; Gu, Mingyue

2011-01-01

Current computer-assisted language learning (CALL) research has identified various potentials of technology for language learning. To realize and maximize these potentials, engaging students in self-initiated use of technology for language learning is a must. This study investigated Hong Kong university students' use of technology outside the…

The Effect of Computer Assisted and Computer Based Teaching Methods on Computer Course Success and Computer Using Attitudes of Students

ERIC Educational Resources Information Center

Tosun, Nilgün; Suçsuz, Nursen; Yigit, Birol

2006-01-01

The purpose of this research was to investigate the effects of the computer-assisted and computer-based instructional methods on students achievement at computer classes and on their attitudes towards using computers. The study, which was completed in 6 weeks, were carried out with 94 sophomores studying in formal education program of Primary…

Technology-mediated information sharing between patients and clinicians in primary care encounters.

PubMed

Asan, Onur; Montague, Enid

The aim of this study was to identify and describe the use of electronic health records for information sharing between patients and clinicians in primary care encounters. This topic is particularly important as computers and other technologies are increasingly implemented in multi-user health care settings where interactions and communication between patients and clinicians are integral to interpersonal and organizational outcomes. An ethnographic approach was used to classify the encounters into distinct technology-use patterns based on clinicians` interactions with the technology and patients. Each technology-use pattern was quantitatively analysed to assist with comparison. Quantitative analysis was based on duration of patient and clinician gaze at EHR. Physicians employed three different styles to share information using EHRs: Active information-sharing, in which a clinician turns the monitor towards the patient and uses the computer to actively share information with the patient;Passive information-sharing, when a clinician does not move the monitor, but the patient might see the monitor by leaning in if they choose; andTechnology withdrawal, when a clinician does not share the monitor with the patient. A variety of technology-mediated information-sharing styles may be effective in providing patient-centred care. New EHR designs may be needed to facilitate information sharing between patients and clinicians.

Nurses using futuristic technology in today's healthcare setting.

PubMed

Wolf, Debra M; Kapadia, Amar; Kintzel, Jessie; Anton, Bonnie B

2009-01-01

Human computer interaction (HCI) equates nurses using voice assisted technology within a clinical setting to document patient care real time, retrieve patient information from care plans, and complete routine tasks. This is a reality currently utilized by clinicians today in acute and long term care settings. Voice assisted documentation provides hands & eyes free accurate documentation while enabling effective communication and task management. The speech technology increases the accuracy of documentation, while interfacing directly into the electronic health record (EHR). Using technology consisting of a light weight headset and small fist size wireless computer, verbal responses to easy to follow cues are converted into a database systems allowing staff to obtain individualized care status reports on demand. To further assist staff in their daily process, this innovative technology allows staff to send and receive pages as needed. This paper will discuss how leading edge and award winning technology is being integrated within the United States. Collaborative efforts between clinicians and analyst will be discussed reflecting the interactive design and build functionality. Features such as the system's voice responses and directed cues will be shared and how easily data can be documented, viewed and retrieved. Outcome data will be presented on how the technology impacted organization's quality outcomes, financial reimbursement, and employee's level of satisfaction.

Raising awareness of assistive technology in older adults through a community-based, cooperative extension program.

PubMed

Sellers, Debra M; Markham, Melinda Stafford

2012-01-01

The Fashion an Easier Lifestyle with Assistive Technology (FELAT) curriculum was developed as a needs-based, community educational program provided through a state Cooperative Extension Service. The overall goal for participants was to raise awareness of assistive technology. Program evaluation included a postassessment and subsequent interview to determine short-term knowledge gain and longer term behavior change. The sample consisted of mainly older, married females. The FELAT program was effective at raising awareness and increasing knowledge of assistive technology, and for many participants, the program acted as a catalyst for planning to or taking action related to assistive technology.

Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology

NASA Technical Reports Server (NTRS)

Hyde, Patricia R.; Loftin, R. Bowen

1993-01-01

The volume 2 proceedings from the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology are presented. Topics discussed include intelligent computer assisted training (ICAT) systems architectures, ICAT educational and medical applications, virtual environment (VE) training and assessment, human factors engineering and VE, ICAT theory and natural language processing, ICAT military applications, VE engineering applications, ICAT knowledge acquisition processes and applications, and ICAT aerospace applications.

Pedicle screw placement using image guided techniques.

PubMed

Merloz, P; Tonetti, J; Pittet, L; Coulomb, M; Lavalleé, S; Sautot, P

1998-09-01

Clinical evaluation of a computer assisted spine surgical system is presented. Eighty pedicle screws were inserted using computer assisted technology in thoracic and lumbar vertebrae for treatment of different types of disorders including fractures, spondylolisthesis, and scoliosis. Fifty-two patients with severe fractures, spondylolisthesis, or pseudoarthrosis of T10 to L5 were treated using a computer assisted technique on 1/2 the patients and performing the screw insertion manually for the other 1/2. At the same time, 28 pedicle screws were inserted in T12 to L4 vertebrae for scoliosis with the help of the computer assisted technique. Surgery was followed in all cases (66 vertebrae; 132 pedicle screws) by postoperative radiographs and computed tomographic examination, on which measurements of screw position relative to pedicle position could be done. For fractures, spondylolisthesis, or pseudarthrosis, comparison between the two groups showed that four screws in 52 (8%) vertebrae had incorrect placement with computer assisted technique whereas 22 screws in 52 (42%) vertebrae had incorrect placement with manual insertion. In patients with scoliosis, four screws in 28 (14%) vertebrae had incorrect placement. In all of the patients (132 pedicle screws) there were no neurologic complications. These results show that a computer assisted technique is much more accurate and safe than manual insertion.

Passive wireless tags for tongue controlled assistive technology interfaces.

PubMed

Rakibet, Osman O; Horne, Robert J; Kelly, Stephen W; Batchelor, John C

2016-03-01

Tongue control with low profile, passive mouth tags is demonstrated as a human-device interface by communicating values of tongue-tag separation over a wireless link. Confusion matrices are provided to demonstrate user accuracy in targeting by tongue position. Accuracy is found to increase dramatically after short training sequences with errors falling close to 1% in magnitude with zero missed targets. The rate at which users are able to learn accurate targeting with high accuracy indicates that this is an intuitive device to operate. The significance of the work is that innovative very unobtrusive, wireless tags can be used to provide intuitive human-computer interfaces based on low cost and disposable mouth mounted technology. With the development of an appropriate reading system, control of assistive devices such as computer mice or wheelchairs could be possible for tetraplegics and others who retain fine motor control capability of their tongues. The tags contain no battery and are intended to fit directly on the hard palate, detecting tongue position in the mouth with no need for tongue piercings.

A review of the progression and future implications of brain-computer interface therapies for restoration of distal upper extremity motor function after stroke

PubMed Central

Remsik, Alexander; Young, Brittany; Vermilyea, Rebecca; Kiekoefer, Laura; Abrams, Jessica; Elmore, Samantha Evander; Schultz, Paige; Nair, Veena; Edwards, Dorothy; Williams, Justin; Prabhakaran, Vivek

2016-01-01

Stroke is a leading cause of acquired disability resulting in distal upper extremity functional motor impairment. Stroke mortality rates continue to decline with advances in healthcare and medical technology. This has led to an increased demand for advanced, personalized rehabilitation. Survivors often experience some level of spontaneous recovery shortly after their stroke event; yet reach a functional plateau after which there is exiguous motor recovery. Nevertheless, studies have demonstrated the potential for recovery beyond this plateau. Non-traditional neurorehabilitation techniques, such as those incorporating the brain-computer interface (BCI), are being investigated for rehabilitation. BCIs may offer a gateway to the brain’s plasticity and revolutionize how humans interact with the world. Non-invasive BCIs work by closing the proprioceptive feedback loop with real-time, multi-sensory feedback allowing for volitional modulation of brain signals to assist hand function. BCI technology potentially promotes neuroplasticity and Hebbian-based motor recovery by rewarding cortical activity associated with sensory-motor rhythms through use with a variety of self-guided and assistive modalities. PMID:27112213

Computational Support for Technology- Investment Decisions

NASA Technical Reports Server (NTRS)

Adumitroaie, Virgil; Hua, Hook; Lincoln, William; Block, Gary; Mrozinski, Joseph; Shelton, Kacie; Weisbin, Charles; Elfes, Alberto; Smith, Jeffrey

2007-01-01

Strategic Assessment of Risk and Technology (START) is a user-friendly computer program that assists human managers in making decisions regarding research-and-development investment portfolios in the presence of uncertainties and of non-technological constraints that include budgetary and time limits, restrictions related to infrastructure, and programmatic and institutional priorities. START facilitates quantitative analysis of technologies, capabilities, missions, scenarios and programs, and thereby enables the selection and scheduling of value-optimal development efforts. START incorporates features that, variously, perform or support a unique combination of functions, most of which are not systematically performed or supported by prior decision- support software. These functions include the following: Optimal portfolio selection using an expected-utility-based assessment of capabilities and technologies; Temporal investment recommendations; Distinctions between enhancing and enabling capabilities; Analysis of partial funding for enhancing capabilities; and Sensitivity and uncertainty analysis. START can run on almost any computing hardware, within Linux and related operating systems that include Mac OS X versions 10.3 and later, and can run in Windows under the Cygwin environment. START can be distributed in binary code form. START calls, as external libraries, several open-source software packages. Output is in Excel (.xls) file format.

AUDIS wear: a smartwatch based assistive device for ubiquitous awareness of environmental sounds.

PubMed

Mielke, Matthias; Bruck, Rainer

2016-08-01

A multitude of assistive devices is available for deaf people (i.e. deaf, deafened, and hard of hearing). Besides hearing and communication aids, devices to access environmental sounds are available commercially. But the devices have two major drawbacks: 1. they are targeted at indoor environments (e.g. home or work), and 2. only specific events are supported (e.g. the doorbell or telephone). Recent research shows that important sounds can occur in all contexts and that the interests in sounds are diverse. These drawbacks can be tackled by using modern information and communication technology that enables the development of new and improved assistive devices. The smartwatch, a new computing platform in the form of a wristwatch, offers new potential for assistive technology. Its design promises a perfect integration into various different social contexts and thus blends perfectly into the user's life. Based on a smartwatch and algorithms from pattern recognition, a prototype for awareness of environmental sounds is presented here. It observes the acoustic environment of the user and detects environmental sounds. A vibration is triggered when a sound is detected and the type of sound is shown on the display. The design of the prototype was discussed with deaf people in semi-structured interviews, leading to a set of implications for the design of such a device.

Proceedings of Selected Research Paper Presentations at the 1988 Convention of the Association for Educational Communications and Technology and Sponsored by the Research and Theory Division (10th, New Orleans, Louisiana, January 14-19, 1988).

ERIC Educational Resources Information Center

Simonson, Michael R., Ed.; Frederick, Jacqueline K., Ed.

1988-01-01

The 54 papers in this volume represent some of the most current thinking in educational communications and technology. Individual papers address the following topics: feedback in computer-assisted instruction (CAI); cognitive style and cognitive strategies in CAI; persuasive film-making; learning strategies; computer technology and children's word…

Computer Assisted Rehabilitation Service Delivery.

ERIC Educational Resources Information Center

West Virginia Rehabilitation Research and Training Center, Dunbar.

This volume consisting of state of the art reviews, suggestions and guidelines for practitioners, and program descriptions deals with the current and potential applications of computers in the delivery of services for vocational rehabilitation (VR). Discussed first are current applications of computer technology in rehabilitative service delivery.…

Beyond the Ask and Advise: Implementation of a Computer Tablet Intervention to Enhance Provider Adherence to the 5As for Smoking Cessation.

PubMed

Kalkhoran, Sara; Appelle, Nicole A; Napoles, Anna M; Munoz, Ricardo F; Lum, Paula J; Alvarado, Nicholas; Gregorich, Steven E; Satterfield, Jason M

2016-01-01

The 5As for smoking cessation is an evidence-based intervention to aid providers in counseling patients to quit smoking. While most providers "ask" patients about their tobacco use patterns and "advise" them to quit, fewer patients report being "assessed" for their interest in quitting, and even fewer report subsequent "assistance" in a quit attempt and having follow-up "arranged". This article describes the design of an implementation study testing a computer tablet intervention to improve provider adherence to the 5As for smoking cessation. Findings will contribute to the existing literature on technology acceptance for addressing addictive behaviors, and how digital tools may facilitate the broader implementation of evidence-based behavioral counseling practices without adversely affecting clinical flow or patient care. This project develops and tests a computer-facilitated 5As (CF-5As) model that administers the 5As intervention to patients with a computer tablet, then prompts providers to reinforce next steps. During the development phase, 5As' content will be programmed onto computer tablets, alpha and beta-testing of the service delivery model will be done, and pre-intervention interview and questionnaire data will be collected from patients, providers, and clinic staff about 5As fidelity and technology adoption. During the program evaluation phase, a randomized controlled trial comparing a group who receives the CF-5As intervention to one that does not will be conducted to assess 5As fidelity. Using the technology acceptance model, a mixed methods study of contextual and human factors influencing both 5As and technology adoption will also be conducted. Technology is increasingly being used in clinical settings. A technological tool that connects patients, providers, and clinic staff to facilitate the promotion of behavioral interventions such as smoking cessation may provide an innovative platform through which to efficiently and effectively implement evidence-based practices. Copyright © 2015 Elsevier Inc. All rights reserved.

A Methodological Analysis of Randomized Clinical Trials of Computer-Assisted Therapies for Psychiatric Disorders: Toward Improved Standards for an Emerging Field

PubMed Central

Kiluk, Brian D.; Sugarman, Dawn E.; Nich, Charla; Gibbons, Carly J.; Martino, Steve; Rounsaville, Bruce J.; Carroll, Kathleen M.

2013-01-01

Objective Computer-assisted therapies offer a novel, cost-effective strategy for providing evidence-based therapies to a broad range of individuals with psychiatric disorders. However, the extent to which the growing body of randomized trials evaluating computer-assisted therapies meets current standards of methodological rigor for evidence-based interventions is not clear. Method A methodological analysis of randomized clinical trials of computer-assisted therapies for adult psychiatric disorders, published between January 1990 and January 2010, was conducted. Seventy-five studies that examined computer-assisted therapies for a range of axis I disorders were evaluated using a 14-item methodological quality index. Results Results indicated marked heterogeneity in study quality. No study met all 14 basic quality standards, and three met 13 criteria. Consistent weaknesses were noted in evaluation of treatment exposure and adherence, rates of follow-up assessment, and conformity to intention-to-treat principles. Studies utilizing weaker comparison conditions (e.g., wait-list controls) had poorer methodological quality scores and were more likely to report effects favoring the computer-assisted condition. Conclusions While several well-conducted studies have indicated promising results for computer-assisted therapies, this emerging field has not yet achieved a level of methodological quality equivalent to those required for other evidence-based behavioral therapies or pharmacotherapies. Adoption of more consistent standards for methodological quality in this field, with greater attention to potential adverse events, is needed before computer-assisted therapies are widely disseminated or marketed as evidence based. PMID:21536689

Computer-assisted surgery: virtual- and augmented-reality displays for navigation during urological interventions.

PubMed

van Oosterom, Matthias N; van der Poel, Henk G; Navab, Nassir; van de Velde, Cornelis J H; van Leeuwen, Fijs W B

2018-03-01

To provide an overview of the developments made for virtual- and augmented-reality navigation procedures in urological interventions/surgery. Navigation efforts have demonstrated potential in the field of urology by supporting guidance for various disorders. The navigation approaches differ between the individual indications, but seem interchangeable to a certain extent. An increasing number of pre- and intra-operative imaging modalities has been used to create detailed surgical roadmaps, namely: (cone-beam) computed tomography, MRI, ultrasound, and single-photon emission computed tomography. Registration of these surgical roadmaps with the real-life surgical view has occurred in different forms (e.g. electromagnetic, mechanical, vision, or near-infrared optical-based), whereby the combination of approaches was suggested to provide superior outcome. Soft-tissue deformations demand the use of confirmatory interventional (imaging) modalities. This has resulted in the introduction of new intraoperative modalities such as drop-in US, transurethral US, (drop-in) gamma probes and fluorescence cameras. These noninvasive modalities provide an alternative to invasive technologies that expose the patients to X-ray doses. Whereas some reports have indicated navigation setups provide equal or better results than conventional approaches, most trials have been performed in relatively small patient groups and clear follow-up data are missing. The reported computer-assisted surgery research concepts provide a glimpse in to the future application of navigation technologies in the field of urology.

Association of Small Computer Users in Education (ASCUE) Summer Conference. Proceedings (27th, North Myrtle Beach, South Carolina, June 12-16, 1994).

ERIC Educational Resources Information Center

Huston, Rick, Ed.; Armel, Donald, Ed.

Topics addressed by 40 papers from a conference on microcomputers include: developing a campus wide computer ethics policy; integrating new technologies into professional education; campus computer networks; computer assisted instruction; client/server architecture; competencies for entry-level computing positions; auditing and professional…

AEDS Proceedings: The Tomorrow in New Technology; Frontiers in Administrative Computing; Adventures in Instructional Computing.

ERIC Educational Resources Information Center

Association for Educational Data Systems, Washington, DC.

The 122 papers in this collection were presented in 15 sessions of the 20th annual convention of the Association for Educational Data Systems which was held in Orlando, Florida, May 10-14, 1982. Individual papers covered a wide variety of topics, including computer assisted instruction, computer managed instruction, computer literacy,…

Effective approach to spectroscopy and spectral analysis techniques using Matlab

NASA Astrophysics Data System (ADS)

Li, Xiang; Lv, Yong

2017-08-01

With the development of electronic information, computer and network, modern education technology has entered new era, which would give a great impact on teaching process. Spectroscopy and spectral analysis is an elective course for Optoelectronic Information Science and engineering. The teaching objective of this course is to master the basic concepts and principles of spectroscopy, spectral analysis and testing of basic technical means. Then, let the students learn the principle and technology of the spectrum to study the structure and state of the material and the developing process of the technology. MATLAB (matrix laboratory) is a multi-paradigm numerical computing environment and fourth-generation programming language. A proprietary programming language developed by MathWorks, MATLAB allows matrix manipulations, plotting of functions and data, Based on the teaching practice, this paper summarizes the new situation of applying Matlab to the teaching of spectroscopy. This would be suitable for most of the current school multimedia assisted teaching

Web 2.0 in Computer-Assisted Language Learning: A Research Synthesis and Implications for Instructional Design and Educational Practice

ERIC Educational Resources Information Center

Parmaxi, Antigoni; Zaphiris, Panayiotis

2017-01-01

This study explores the research development pertaining to the use of Web 2.0 technologies in the field of Computer-Assisted Language Learning (CALL). Published research manuscripts related to the use of Web 2.0 tools in CALL have been explored, and the following research foci have been determined: (1) Web 2.0 tools that dominate second/foreign…

The Effects of Computer Technology in Assisting the Development of Literacy in Young Struggling Readers and Spellers

ERIC Educational Resources Information Center

Fasting, Rolf B.; Lyster, Solveig-Alma Halaas

2005-01-01

The aim of the present study is to evaluate the effect of MultiFunk, a computer program designed to assist reading, on the reading and spelling proficiency of struggling readers. Fifty-two below-average readers and spellers, in grades 5, 6 and 7, were randomly assigned as experimental and control groups (N = 26 + 26). In addition, 114 classmates,…

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Educational Media and Technology Yearbook, 1999

1999-01-01

Provides annotated listings for current journals, books, ERIC documents, articles, and nonprint resources in the following categories: artificial intelligence/robotics/electronic performance support systems; computer-assisted instruction; distance education; educational research; educational technology; information science and technology;…

The use of computer-aided design/manufacturing (CAD/CAM) technology to aid in the reconstruction of congenitally deficient pediatric mandibles: A case series.

PubMed

Gougoutas, Alexander J; Bastidas, Nicholas; Bartlett, Scott P; Jackson, Oksana

2015-12-01

Microvascular reconstruction of the pediatric mandible, particularly when necessitated by severe, congenital hypoplasia, presents a formidable challenge. Complex cases, however, may be simplified by computer-aided design/computer-aided manufacturing (CAD/CAM) assisted surgical planning. This series represents the senior authors' preliminary experiences with CAD/CAM assisted, microvascular reconstruction of the pediatric mandible. Presented are two patients with hemifacial/bifacial microsomia, both with profound mandibular hypoplasia, who underwent CAD/CAM assisted reconstruction of their mandibles with vascularized fibula flaps. Surgical techniques, CAD/CAM routines employed, complications, and long-term outcomes are reported. Successful mandibular reconstructions were achieved in both patients with centralization of their native mandibles and augmentation of deficient mandibular subunits. No long-term complications were observed. CAD/CAM technology can be utilized in pediatric mandibular reconstruction, and is particularly beneficial in cases of profound, congenital hypoplasia requiring extensive, multi-planar, bony reconstructions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Highlighting the medical applications of 3D printing in Egypt

PubMed Central

Abdelghany, Khaled; Hamza, Hosamuddin

2015-01-01

Computer-assisted designing/computer-assisted manufacturing (CAD/CAM) technology has enabled medical practitioners to tailor physical models in a patient and purpose-specific fashion. It allows the designing and manufacturing of templates, appliances and devices with a high range of accuracy using biocompatible materials. The technique, nevertheless, relies on digital scanning (e.g., using intraoral scanners) and/or digital imaging (e.g., CT and MRI). In developing countries, there are some technical and financial limitations of implementing such advanced tools as an essential portion of medical applications. This paper focuses on the surgical and dental use of 3D printing technology in Egypt as a developing country. PMID:26807414

Raising Awareness of Assistive Technology in Older Adults through a Community-Based, Cooperative Extension Program

ERIC Educational Resources Information Center

Sellers, Debra M.; Markham, Melinda Stafford

2012-01-01

The Fashion an Easier Lifestyle with Assistive Technology (FELAT) curriculum was developed as a needs-based, community educational program provided through a state Cooperative Extension Service. The overall goal for participants was to raise awareness of assistive technology. Program evaluation included a postassessment and subsequent interview to…

Access: Exceptional Children and Technology.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. for Exceptional Children.

The Exceptional Children and New Technology project sought to meet the instructional needs of physically handicapped, emotionally disturbed, learning disabled, and mentally handicapped children through the use of computer technology. The goals of the project were to test the instructional value of adaptive/assistive devices with exceptional…

Artificial Intelligence Applications to High-Technology Training.

ERIC Educational Resources Information Center

Dede, Christopher

1987-01-01

Discusses the use of artificial intelligence to improve occupational instruction in complex subjects with high performance goals, such as those required for high-technology jobs. Highlights include intelligent computer assisted instruction, examples in space technology training, intelligent simulation environments, and the need for adult training…

Sequencing Computer-Assisted Learning of Transformations of Trigonometric Functions

ERIC Educational Resources Information Center

Ross, John A.; Bruce, Catherine D.; Sibbald, Timothy M.

2011-01-01

Studies incorporating technology into the teaching of trigonometry, although sparse, have demonstrated positive effects on student achievement. The optimal sequence for integrating technology with teacher-led mathematics instruction has not been determined. Our research investigated whether technology has a greater impact on student achievement…

Implementation of Audio Computer-Assisted Interviewing Software in HIV/AIDS Research

PubMed Central

Pluhar, Erika; Yeager, Katherine A.; Corkran, Carol; McCarty, Frances; Holstad, Marcia McDonnell; Denzmore-Nwagbara, Pamela; Fielder, Bridget; DiIorio, Colleen

2007-01-01

Computer assisted interviewing (CAI) has begun to play a more prominent role in HIV/AIDS prevention research. Despite the increased popularity of CAI, particularly audio computer assisted self-interviewing (ACASI), some research teams are still reluctant to implement ACASI technology due to lack of familiarity with the practical issues related to using these software packages. The purpose of this paper is to describe the implementation of one particular ACASI software package, the Questionnaire Development System™ (QDS™), in several nursing and HIV/AIDS prevention research settings. We present acceptability and satisfaction data from two large-scale public health studies in which we have used QDS with diverse populations. We also address issues related to developing and programming a questionnaire, discuss practical strategies related to planning for and implementing ACASI in the field, including selecting equipment, training staff, and collecting and transferring data, and summarize advantages and disadvantages of computer assisted research methods. PMID:17662924

Braving the Waters, or How To Get your Computing "Feet" Wet.

ERIC Educational Resources Information Center

Miller, Pat

1997-01-01

Suggests ways for educators to become computer literate: (1) admit you don't know about computers; (2) be patient with yourself; (3) read about technology; (4) get a home computer; (5) attend training; (6) experiment; (7) ask for assistance; and (8) talk with others about what works for them. (AEF)

Computer-Aided Design/Computer-Assisted Manufacture Monolithic Restorations for Severely Worn Dentition: A Case History Report.

PubMed

Abou-Ayash, Samir; Boldt, Johannes; Vuck, Alexander

Full-arch rehabilitation of patients with severe tooth wear due to parafunctional behavior is a challenge for dentists and dental technicians, especially when a highly esthetic outcome is desired. A variety of different treatment options and prosthetic materials are available for such a clinical undertaking. The ongoing progress of computer-aided design/computer-assisted manufacture technologies in combination with all-ceramic materials provides a predictable workflow for these complex cases. This case history report describes a comprehensive, step-by-step treatment protocol leading to an optimally predictable treatment outcome for an esthetically compromised patient.

Blood Pump Development Using Rocket Engine Flow Simulation Technology

NASA Technical Reports Server (NTRS)

Kiris, Cetin C.; Kwak, Dochan

2002-01-01

This viewgraph presentation provides information on the transfer of rocket engine flow simulation technology to work involving the development of blood pumps. Details are offered regarding the design and requirements of mechanical heart assist devices, or VADs (ventricular assist device). There are various computational fluid dynamics issues involved in the visualization of flow in such devices, and these are highlighted and compared to those of rocket turbopumps.

Alberta Education's Clearinghouse: Functions and Findings.

ERIC Educational Resources Information Center

Wighton, David

1984-01-01

Discusses functions of the Alberta (Canada) Computer Technology Project's courseware clearinghouse, reviews findings on instructional software quality, identifies software development trends, and discusses need for support systems to facilitate the incorporation of computer assisted instruction in Canadian schools. (MBR)

Computer-assisted hip and knee arthroplasty. Navigation and active robotic systems: an evidence-based analysis.

PubMed

2004-01-01

The Medical Advisory Secretariat undertook a review of the evidence on the effectiveness and cost-effectiveness of computer assisted hip and knee arthroplasty. The two computer assisted arthroplasty systems that are the topics of this review are (1) navigation and (2) robotic-assisted hip and knee arthroplasty. Computer-assisted arthroplasty consists of navigation and robotic systems. Surgical navigation is a visualization system that provides positional information about surgical tools or implants relative to a target bone on a computer display. Most of the navigation-assisted arthroplasty devices that are the subject of this review are licensed by Health Canada. Robotic systems are active robots that mill bone according to information from a computer-assisted navigation system. The robotic-assisted arthroplasty devices that are the subject of this review are not currently licensed by Health Canada. The Cochrane and International Network of Agencies for Health Technology Assessment databases did not identify any health technology assessments on navigation or robotic-assisted hip or knee arthroplasty. The MEDLINE and EMBASE databases were searched for articles published between January 1, 1996 and November 30, 2003. This search produced 367 studies, of which 9 met the inclusion criteria. NAVIGATION-ASSISTED ARTHROPLASTY: Five studies were identified that examined navigation-assisted arthroplasty.A Level 1 evidence study from Germany found a statistically significant difference in alignment and angular deviation between navigation-assisted and free-hand total knee arthroplasty in favour of navigation-assisted surgery. However, the endpoints in this study were short-term. To date, the long-term effects (need for revision, implant longevity, pain, functional performance) are unknown.(1)A Level 2 evidence short-term study found that navigation-assisted total knee arthroplasty was significantly better than a non-navigated procedure for one of five postoperative measured angles.(2)A Level 2 evidence short-term study found no statistically significant difference in the variation of the abduction angle between navigation-assisted and conventional total hip arthroplasty.(3)Level 3 evidence observational studies of navigation-assisted total knee arthroplasty and unicompartmental knee arthroplasty have been conducted. Two studies reported that "the follow-up of the navigated prostheses is currently too short to know if clinical outcome or survival rates are improved. Longer follow-up is required to determine the respective advantages and disadvantages of both techniques."(4;5) ROBOTIC-ASSISTED ARTHROPLASTY: Four studies were identified that examined robotic-assisted arthroplasty.A Level 1 evidence study revealed that there was no statistically significant difference between functional hip scores at 24 months post implantation between patients who underwent robotic-assisted primary hip arthroplasty and those that were treated with manual implantation.(6)Robotic-assisted arthroplasty had advantages in terms of preoperative planning and the accuracy of the intraoperative procedure.(6)Patients who underwent robotic-assisted hip arthroplasty had a higher dislocation rate and more revisions.(6)Robotic-assisted arthroplasty may prove effective with certain prostheses (e.g., anatomic) because their use may result in less muscle detachment.(6)An observational study (Level 3 evidence) found that the incidence of severe embolic events during hip relocation was lower with robotic arthroplasty than with manual surgery.(7)An observational study (Level 3 evidence) found that there was no significant difference in gait analyses of patients who underwent robotic-assisted total hip arthroplasty using robotic surgery compared to patients who were treated with conventional cementless total hip arthroplasty.(8)An observational study (Level 3 evidence) compared outcomes of total knee arthroplasty between patients undergoing robotic surgery and patients who were historical controls. Brief, qualitative results suggested that there was much broader variation of angles after manual total knee arthroplasty compared to the robotic technique and that there was no difference in knee functional scores or implant position at the 3 and 6 month follow-up.(9).

A Model for Integrating New Technologies into Pre-Service Teacher Training Programs Ajman University (A Case Study)

ERIC Educational Resources Information Center

Shaqour, Ali Zuhdi H.

2005-01-01

This study introduces a "Technology Integration Model" for a learning environment utilizing constructivist learning principles and integrating new technologies namely computers and the Internet into pre-service teacher training programs. The technology integrated programs and learning environments may assist learners to gain experiences…

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Educational Media and Technology Yearbook, 1996

1996-01-01

This annotated list includes media-related resources classified under the following headings: artificial intelligence and robotics, CD-ROM, computer-assisted instruction, databases and online searching, distance education, educational research, educational technology, electronic publishing, information science and technology, instructional design…

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Educational Media and Technology Yearbook, 1997

1997-01-01

This annotated list includes media-related resources classified under the following headings: artificial intelligence and robotics, CD-ROM, computer-assisted instruction, databases and online searching, distance education, educational research, educational technology, electronic publishing, information science and technology, instructional design…

Technology Prompts New Understandings: The Case of Equality

ERIC Educational Resources Information Center

Bardini, Caroline; Oldenburg, Reinhard; Stacey, Kaye; Pierce, Robyn

2013-01-01

Changes to students' understanding of mathematical notation may be brought about by using technology within mathematics. Taking equality as a case study, the paper provides brief epistemological, historical, didactical, and computational reviews of its symbolic representation in pen-and-paper and technology-assisted mathematics, most especially in…

Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

ERIC Educational Resources Information Center

Nee, John G.; Kare, Audhut P.

1987-01-01

Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

Interactive Computer-Assisted Instruction in Acid-Base Physiology for Mobile Computer Platforms

ERIC Educational Resources Information Center

Longmuir, Kenneth J.

2014-01-01

In this project, the traditional lecture hall presentation of acid-base physiology in the first-year medical school curriculum was replaced by interactive, computer-assisted instruction designed primarily for the iPad and other mobile computer platforms. Three learning modules were developed, each with ~20 screens of information, on the subjects…

Computer-assisted neurosurgical navigational system for transsphenoidal surgery--technical note.

PubMed

Onizuka, M; Tokunaga, Y; Shibayama, A; Miyazaki, H

2001-11-01

Transsphenoidal surgery carries the risk of carotid artery injury even for very experienced neurosurgeons. The computer-assisted neurosurgical (CANS) navigational system was used to obtain more precise guidance, based on the axial and coronal images during the transsphenoidal approach for nine pituitary adenomas. The CANS navigator consists of a three-dimensional digitizer, a computer, and a graphic unit, which utilizes electromagnetic coupling technology to detect the spatial position of a suction tube attached to a magnetic sensor. Preoperatively, the magnetic resonance images are transferred and stored in the computer and the tip of the suction tube is shown on a real-time basis superimposed on the preoperative images. The CANS navigation system correctly displayed the surgical orientation and provided localization in all nine patients. No intraoperative complications were associated with the use of this system. However, outflow of cerebrospinal fluid during tumor removal may affect the accuracy, so the position of the probe when the tumor is removed must be accurately determined. The CANS navigator enables precise localization of the suction tube during the transsphenoidal approach and allows safer and less-invasive surgery.

A novel concept for smart trepanation.

PubMed

Follmann, Axel; Korff, Alexander; Fuertjes, Tobias; Kunze, Sandra C; Schmieder, Kirsten; Radermacher, Klaus

2012-01-01

Trepanation of the skull is a common procedure in craniofacial and neurosurgical interventions, allowing access to the innermost cranial structures. Despite a careful advancement, injury of the dura mater represents a frequent complication during these cranial openings. The technology of computer-assisted surgery offers different support systems such as navigated tools and surgical robots. This article presents a novel technical approach toward an image- and sensor-based synergistic control of the cutting depth of a manually guided soft-tissue-preserving saw. Feasibility studies in a laboratory setup modeling relevant skull tissue parameters demonstrate that errors due to computed tomography or magnetic resonance image segmentation and registration, optical tracking, and mechanical tolerances of up to 2.5 mm, imminent to many computer-assisted surgery systems, can be compensated for by the cutting tool characteristics without damaging the dura. In conclusion, the feasibility of a computer-controlled trepanation system providing a safer and efficient trepanation has been demonstrated. Injuries of the dura mater can be avoided, and the bone cutting gap can be reduced to 0.5 mm with potential benefits for the reintegration of the bone flap.

Science Teacher Efficacy and Extrinsic Factors Toward Professional Development Using Video Games in a Design-Based Research Model: The Next Generation of STEM Learning

NASA Astrophysics Data System (ADS)

Annetta, Leonard A.; Frazier, Wendy M.; Folta, Elizabeth; Holmes, Shawn; Lamb, Richard; Cheng, Meng-Tzu

2013-02-01

Designed-based research principles guided the study of 51 secondary-science teachers in the second year of a 3-year professional development project. The project entailed the creation of student-centered, inquiry-based, science, video games. A professional development model appropriate for infusing innovative technologies into standards-based curricula was employed to determine how science teacher's attitudes and efficacy where impacted while designing science-based video games. The study's mixed-method design ascertained teacher efficacy on five factors (General computer use, Science Learning, Inquiry Teaching and Learning, Synchronous chat/text, and Playing Video Games) related to technology and gaming using a web-based survey). Qualitative data in the form of online blog posts was gathered during the project to assist in the triangulation and assessment of teacher efficacy. Data analyses consisted of an Analysis of Variance and serial coding of teacher reflective responses. Results indicated participants who used computers daily have higher efficacy while using inquiry-based teaching methods and science teaching and learning. Additional emergent findings revealed possible motivating factors for efficacy. This professional development project was focused on inquiry as a pedagogical strategy, standard-based science learning as means to develop content knowledge, and creating video games as technological knowledge. The project was consistent with the Technological Pedagogical Content Knowledge (TPCK) framework where overlapping circles of the three components indicates development of an integrated understanding of the suggested relationships. Findings provide suggestions for development of standards-based science education software, its integration into the curriculum and, strategies for implementing technology into teaching practices.

Assistive technologies after stroke: self-management or fending for yourself? A focus group study

PubMed Central

2013-01-01

Background Assistive Technologies, defined as “electrical or mechanical devices designed to help people recover movement” have demonstrated clinical benefits in upper-limb stroke rehabilitation. Stroke services are becoming community-based and more reliant on self-management approaches. Assistive technologies could become important tools within self-management, however, in practice, few people currently use assistive technologies. This study investigated patients’, family caregivers and health professionals’ experiences and perceptions of stroke upper-limb rehabilitation and assistive technology use and identified the barriers and facilitators to their use in supporting stroke self-management. Methods A three-day exhibition of assistive technologies was attended by 204 patients, family caregivers/friends and health professionals. Four focus groups were conducted with people purposively sampled from exhibition attendees. They included i) people with stroke who had used assistive technologies (n = 5), ii) people with stroke who had not used assistive technologies (n = 6), iii) family caregivers (n = 5) and iv) health professionals (n = 6). The audio-taped focus groups were facilitated by a moderator and observer. All participants were asked to discuss experiences, strengths, weaknesses, barriers and facilitators to using assistive technologies. Following transcription, data were analysed using thematic analysis. Results All respondents thought assistive technologies had the potential to support self-management but that this opportunity was currently unrealised. All respondents considered assistive technologies could provide a home-based solution to the need for high intensity upper-limb rehabilitation. All stakeholders also reported significant barriers to assistive technology use, related to i) device design ii) access to assistive technology information and iii) access to assistive technology provision. The lack of and need for a coordinated system for assistive technology provision was apparent. A circular limitation of lack of evidence in clinical settings, lack of funded provision, lack of health professional knowledge about assistive technologies and confidence in prescribing them leading to lack of assistive technology service provision meant that often patients either received no assistive technologies or they and/or their family caregivers liaised directly with manufacturers without any independent expert advice. Conclusions Considerable systemic barriers to realising the potential of assistive technologies in upper-limb stroke rehabilitation were reported. Attention needs to be paid to increasing evidence of assistive technology effectiveness and develop clinical service provision. Device manufacturers, researchers, health professionals, service funders and people with stroke and family caregivers need to work creatively and collaboratively to develop new funding models, improve device design and increase knowledge and training in assistive technology use. PMID:23968362

Using Computer-Assisted Assessment Heuristics for Usability Evaluations

ERIC Educational Resources Information Center

Sim, Gavin; Read, Janet C.

2016-01-01

Teaching practices within educational institutions have evolved through the increased adoption of technology to deliver the curriculum and the use of computers for assessment purposes. For educational technologists, there is a vast array of commercial computer applications available for the delivery of objective tests, and in some instances,…

Using Information Technology in Mathematics Education.

ERIC Educational Resources Information Center

Tooke, D. James, Ed.; Henderson, Norma, Ed.

This collection of essays examines the history and impact of computers in mathematics and mathematics education from the early, computer-assisted instruction efforts through LOGO, the constructivist educational software for K-9 schools developed in the 1980s, to MAPLE, the computer algebra system for mathematical problem solving developed in the…

Implementing Computer Integrated Manufacturing Technician Program.

ERIC Educational Resources Information Center

Gibbons, Roger

A computer-integrated manufacturing (CIM) technician program was developed to provide training and technical assistance to meet the needs of business and industry in the face of the demands of high technology. The Computer and Automated Systems Association (CASA) of the Society of Manufacturing Engineers provided the incentive and guidelines…

Attitude Towards Computers and Classroom Management of Language School Teachers

ERIC Educational Resources Information Center

Jalali, Sara; Panahzade, Vahid; Firouzmand, Ali

2014-01-01

Computer-assisted language learning (CALL) is the realization of computers in schools and universities which has potentially enhanced the language learning experience inside the classrooms. The integration of the technologies into the classroom demands that the teachers adopt a number of classroom management procedures to maintain a more…

Multisensory Modalities for Blending and Segmenting among Early Readers

ERIC Educational Resources Information Center

Lee, Lay Wah

2016-01-01

With the advent of touch-screen interfaces on the tablet computer, multisensory elements in reading instruction have taken on a new dimension. This computer assisted language learning research aimed to determine whether specific technology features of a tablet computer can add to the functionality of multisensory instruction in early reading…

National Geographic Society Kids Network: Report on 1994 teacher participants

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

In 1994, National Geographic Society Kids Network, a computer/telecommunications-based science curriculum, was presented to elementary and middle school teachers through summer programs sponsored by NGS and US DOE. The network program assists teachers in understanding the process of doing science; understanding the role of computers and telecommunications in the study of science, math, and engineering; and utilizing computers and telecommunications appropriately in the classroom. The program enables teacher to integrate science, math, and technology with other subjects with the ultimate goal of encouraging students of all abilities to pursue careers in science/math/engineering. This report assesses the impact of the networkmore » program on participating teachers.« less

Toward an Understanding of Preservice English as a Foreign Language Teachers' Acceptance of Computer-Assisted Language Learning 2.0 in the People's Republic of China

ERIC Educational Resources Information Center

Mei, Bing; Brown, Gavin T. L.; Teo, Timothy

2018-01-01

Despite the rapid proliferation of information and communication technologies, there exists a paucity of empirical research on the causes of the current low acceptance of computer-assisted language learning (CALL) by English as a foreign language (EFL) teachers in the People's Republic of China (PRC). This study aims to remedy this situation…

The advanced software development workstation project

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III; Pitman, Charles L.

1991-01-01

The Advanced Software Development Workstation (ASDW) task is researching and developing the technologies required to support Computer Aided Software Engineering (CASE) with the emphasis on those advanced methods, tools, and processes that will be of benefit to support all NASA programs. Immediate goals are to provide research and prototype tools that will increase productivity, in the near term, in projects such as the Software Support Environment (SSE), the Space Station Control Center (SSCC), and the Flight Analysis and Design System (FADS) which will be used to support the Space Shuttle and Space Station Freedom. Goals also include providing technology for development, evolution, maintenance, and operations. The technologies under research and development in the ASDW project are targeted to provide productivity enhancements during the software life cycle phase of enterprise and information system modeling, requirements generation and analysis, system design and coding, and system use and maintenance. On-line user's guides will assist users in operating the developed information system with knowledge base expert assistance.

ICCE/ICCAI 2000 Keynote Papers.

ERIC Educational Resources Information Center

2000

This document contains the four keynote papers from ICCE/ICCAI 2000 (International Conference on Computers in Education/International Conference on Computer-Assisted Instruction). "Using Technologies To Model Student Problem Spaces" (David Jonassen) contrasts examples of semantic network, expert system, and systems modeling…

The Effect of the Usage of Computer-Based Assistive Devices on the Functioning and Quality of Life of Individuals Who Are Blind or Have Low Vision

ERIC Educational Resources Information Center

Rosner, Yotam; Perlman, Amotz

2018-01-01

Introduction: The Israel Ministry of Social Affairs and Social Services subsidizes computer-based assistive devices for individuals with visual impairments (that is, those who are blind or have low vision) to assist these individuals in their interactions with computers and thus to enhance their independence and quality of life. The aim of this…

Use of computers and the Internet by residents in US family medicine programmes.

PubMed

King, Richard V; Murphy-Cullen, Cassie L; Mayo, Helen G; Marcee, Alice K; Schneider, Gregory W

2007-06-01

Computers, personal digital assistants (PDA), and the Internet are widely used as resources in medical education and clinical care. Educators who intend to incorporate these resources effectively into residency education programmes can benefit from understanding how residents currently use these tools, their skills, and their preferences. The researchers sent questionnaires to 306 US family medicine residency programmes for all of their residents to complete. Respondents were 1177 residents from 125 (41%) programmes. Access to a computer was reported by 95% of respondents. Of these, 97% of desktop and 89% of laptop computers could access the Internet. Residents accessed various educational and clinical resources. Half felt they had 'intermediate' skills at Web searches, 23% had 'some skills,' and 27% were 'quite skilled.' Those under 30 years of age reported higher skill levels. Those who experienced a Web-based curriculum in medical school reported higher search skills and greater success in finding clinical information. Respondents preferred to use technology to supplement the didactic sessions offered in resident teaching conferences. Favourable conditions exist in family medicine residency programmes to implement a blend of traditional and technology-based learning experiences. These conditions include residents' experience, skills, and preferences.

Computer Programmed Milling Machine Operations. High-Technology Training Module.

ERIC Educational Resources Information Center

Leonard, Dennis

This learning module for a high school metals and manufacturing course is designed to introduce the concept of computer-assisted machining (CAM). Through it, students learn how to set up and put data into the controller to machine a part. They also become familiar with computer-aided manufacturing and learn the advantages of computer numerical…

In the Literature.

ERIC Educational Resources Information Center

Kilpatrick, Thomas L., Ed.

1998-01-01

Provides annotations of 29 journal articles and six book reviews on a variety of topics related to technology in libraries, including collection development, computer-assisted instruction, databases, distance education, ergonomics, hardware, information technology, interlibrary loan and document supply, Internet, online catalogs, preservation,…

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Price, Brooke, Ed.

2001-01-01

Lists media-related journals, books, ERIC documents, journal articles, and nonprint resources published in 1999-2000. The annotated entries are classified under the following headings: artificial intelligence; computer assisted instruction; distance education; educational research; educational technology; information science and technology;…

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Burdett, Anna E.

2003-01-01

Lists media-related journals, books, ERIC documents, journal articles, and nonprint resources published in 2001-2002. The annotated entries are classified under the following headings: artificial intelligence; computer assisted instruction; distance education; educational research; educational technology; information science and technology;…

Surface texture and hardness of dental alloys processed by alternative technologies

NASA Astrophysics Data System (ADS)

Porojan, Liliana; Savencu, Cristina E.; Topală, Florin I.; Porojan, Sorin D.

2017-08-01

Technological developments have led to the implementation of novel digitalized manufacturing methods for the production of metallic structures in prosthetic dentistry. These technologies can be classified as based on subtractive manufacturing, assisted by computer-aided design/computer-aided manufacturing (CAD/CAM) systems, or on additive manufacturing (AM), such as the recently developed laser-based methods. The aim of the study was to assess the surface texture and hardness of metallic structures for dental restorations obtained by alternative technologies: conventional casting (CST), computerized milling (MIL), AM power bed fusion methods, respective selective laser melting (SLM) and selective laser sintering (SLS). For the experimental analyses metallic specimens made of Co-Cr dental alloys were prepared as indicated by the manufacturers. The specimen structure at the macro level was observed by an optical microscope and micro-hardness was measured in all substrates. Metallic frameworks obtained by AM are characterized by increased hardness, depending also on the surface processing. The formation of microstructural defects can be better controlled and avoided during SLM and MIL process. Application of power bed fusion techniques, like SLS and SLM, is currently a challenge in dental alloys processing.

Self-Repairing Fatigue Damage in Metallic Structures for Aerospace Vehicles Using Shape Memory Alloy Self-healing (SMASH) Technology

NASA Technical Reports Server (NTRS)

Wright, M. Clara; Manuel, Michele; Wallace, Terryl; Newman, Andy; Brinson, Kate

2015-01-01

This DAA is for the Phase II webinar presentation of the ARMD-funded SMASH technology. A self-repairing aluminum-based composite system has been developed using liquid-assisted healing theory in conjunction with the shape memory effect of wire reinforcements. The metal matrix composite was thermodynamically designed to have a matrix with a relatively even dispersion of low-melting phase, allowing for repair of cracks at a pre-determined temperature. Shape memory alloy wire reinforcements were used within the composite to provide crack closure. Investigators focused the research on fatigue cracks propagating through the matrix in order to optimize and computer model the SMASH technology for aeronautical applications.

Training to use a commercial brain-computer interface as access technology: a case study.

PubMed

Taherian, Sarvnaz; Selitskiy, Dmitry; Pau, James; Davies, T Claire; Owens, R Glynn

2016-01-01

This case study describes how an individual with spastic quadriplegic cerebral palsy was trained over a period of four weeks to use a commercial electroencephalography (EEG)-based brain-computer interface (BCI). The participant spent three sessions exploring the system, and seven sessions playing a game focused on EEG feedback training of left and right arm motor imagery and a customised, training game paradigm was employed. The participant showed improvement in the production of two distinct EEG patterns. The participant's performance was influenced by motivation, fatigue and concentration. Six weeks post-training the participant could still control the BCI and used this to type a sentence using an augmentative and alternative communication application on a wirelessly linked device. The results from this case study highlight the importance of creating a dynamic, relevant and engaging training environment for BCIs. Implications for Rehabilitation Customising a training paradigm to suit the users' interests can influence adherence to assistive technology training. Mood, fatigue, physical illness and motivation influence the usability of a brain-computer interface. Commercial brain-computer interfaces, which require little set up time, may be used as access technology for individuals with severe disabilities.

Estimated Prevalence of the Target Population for Brain-Computer Interface Neurotechnology in the Netherlands.

PubMed

Pels, Elmar G M; Aarnoutse, Erik J; Ramsey, Nick F; Vansteensel, Mariska J

2017-07-01

People who suffer from paralysis have difficulties participating in society. Particularly burdensome is the locked-in syndrome (LIS). LIS patients are not able to move and speak but are cognitively healthy. They rely on assistive technology to interact with the world and may benefit from neurotechnological advances. Optimal research and design of such aids requires a well-defined target population. However, the LIS population is poorly characterized and the number of patients in this condition is unknown. Here we estimated and described the LIS patient population in the Netherlands to define the target population for assistive (neuro)technology. We asked physicians in the Netherlands if they had patients suffering from severe paralysis and communication problems in their files. Physicians responding affirmatively were asked to fill out a questionnaire on the patients' status. We sent out 9570 letters to general practitioners (GPs), who reported 83 patients. After first screening, the GPs of 46 patients received the questionnaire. Based on the responses, 26 patients were classified as having LIS. Extrapolation of these numbers resulted in a prevalence of 0.73 patients per 100 000 inhabitants. Notable results from the questionnaire were the percentage of patients with neuromuscular disease (>50%) and living at home (>70%). We revealed an etiologically diverse group of LIS patients. The functioning and needs of these patients were, however, similar and many relied on assistive technology. By characterizing the LIS population, our study may contribute to optimal development of assistive (neuro)technology.

Welcome to health information science and systems.

PubMed

Zhang, Yanchun

2013-01-01

Health Information Science and Systems is an exciting, new, multidisciplinary journal that aims to use technologies in computer science to assist in disease diagnoses, treatment, prediction and monitoring through the modeling, design, development, visualization, integration and management of health related information. These computer-science technologies include such as information systems, web technologies, data mining, image processing, user interaction and interface, sensors and wireless networking and are applicable to a wide range of health related information including medical data, biomedical data, bioinformatics data, public health data.

A pilot single-blind multicentre randomized controlled trial to evaluate the potential benefits of computer-assisted arm rehabilitation gaming technology on the arm function of children with spastic cerebral palsy.

PubMed

Preston, Nick; Weightman, Andrew; Gallagher, Justin; Levesley, Martin; Mon-Williams, Mark; Clarke, Mike; O'Connor, Rory J

2016-10-01

To evaluate the potential benefits of computer-assisted arm rehabilitation gaming technology on arm function of children with spastic cerebral palsy. A single-blind randomized controlled trial design. Power calculations indicated that 58 children would be required to demonstrate a clinically important difference. Intervention was home-based; recruitment took place in regional spasticity clinics. A total of 15 children with cerebral palsy aged five to 12 years were recruited; eight to the device group. Both study groups received 'usual follow-up treatment' following spasticity treatment with botulinum toxin; the intervention group also received a rehabilitation gaming device. ABILHAND-kids and Canadian Occupational Performance Measure were performed by blinded assessors at baseline, six and 12 weeks. An analysis of covariance showed no group differences in mean ABILHAND-kids scores between time points. A non-parametric analysis of variance on Canadian Occupational Performance Measure scores showed a statistically significant improvement across time points (χ 2 (2,15) = 6.778, p = 0.031), but this improvement did not reach minimal clinically important difference. Mean daily device use was seven minutes. Recruitment did not reach target owing to unanticipated staff shortages in clinical services. Feedback from children and their families indicated that the games were not sufficiently engaging to promote sufficient use that was likely to result in functional benefits. This study suggests that computer-assisted arm rehabilitation gaming does not benefit arm function, but a Type II error cannot be ruled out. © The Author(s) 2015.

Bio-Inspired Controller on an FPGA Applied to Closed-Loop Diaphragmatic Stimulation

PubMed Central

Zbrzeski, Adeline; Bornat, Yannick; Hillen, Brian; Siu, Ricardo; Abbas, James; Jung, Ranu; Renaud, Sylvie

2016-01-01

Cervical spinal cord injury can disrupt connections between the brain respiratory network and the respiratory muscles which can lead to partial or complete loss of ventilatory control and require ventilatory assistance. Unlike current open-loop technology, a closed-loop diaphragmatic pacing system could overcome the drawbacks of manual titration as well as respond to changing ventilation requirements. We present an original bio-inspired assistive technology for real-time ventilation assistance, implemented in a digital configurable Field Programmable Gate Array (FPGA). The bio-inspired controller, which is a spiking neural network (SNN) inspired by the medullary respiratory network, is as robust as a classic controller while having a flexible, low-power and low-cost hardware design. The system was simulated in MATLAB with FPGA-specific constraints and tested with a computational model of rat breathing; the model reproduced experimentally collected respiratory data in eupneic animals. The open-loop version of the bio-inspired controller was implemented on the FPGA. Electrical test bench characterizations confirmed the system functionality. Open and closed-loop paradigm simulations were simulated to test the FPGA system real-time behavior using the rat computational model. The closed-loop system monitors breathing and changes in respiratory demands to drive diaphragmatic stimulation. The simulated results inform future acute animal experiments and constitute the first step toward the development of a neuromorphic, adaptive, compact, low-power, implantable device. The bio-inspired hardware design optimizes the FPGA resource and time costs while harnessing the computational power of spike-based neuromorphic hardware. Its real-time feature makes it suitable for in vivo applications. PMID:27378844

Anesthesiologist Assistant

MedlinePlus

... requirements are met), majors typically are biology, chemistry, physics, mathematics, computer science, or one of the allied health professions, such as respiratory therapy, medical technology, or ...

A Spacelab Expert System for Remote Engineering and Science

NASA Technical Reports Server (NTRS)

Groleau, Nick; Colombano, Silvano; Friedland, Peter (Technical Monitor)

1994-01-01

NASA's space science program is based on strictly pre-planned activities. This approach does not always result in the best science. We describe an existing computer system that enables space science to be conducted in a more reactive manner through advanced automation techniques that have recently been used in SLS-2 October 1993 space shuttle flight. Advanced computing techniques, usually developed in the field of Artificial Intelligence, allow large portions of the scientific investigator's knowledge to be "packaged" in a portable computer to present advice to the astronaut operator. We strongly believe that this technology has wide applicability to other forms of remote science/engineering. In this brief article, we present the technology of remote science/engineering assistance as implemented for the SLS-2 space shuttle flight. We begin with a logical overview of the system (paying particular attention to the implementation details relevant to the use of the embedded knowledge for system reasoning), then describe its use and success in space, and conclude with ideas about possible earth uses of the technology in the life and medical sciences.

Research and technology

NASA Technical Reports Server (NTRS)

1986-01-01

The research and technology accomplishments of the NASA Lewis Research Center are summarized for the fiscal year 1986, the 45th anniversary year of the Center. Five major sections are presented covering: aeronautics, aerospace technology, space communications, space station systems, and computational technology support. A table of contents by subjects was developed to assist the reader in finding articles of special interest.

Synthesizing Results From Empirical Research on Computer-Based Scaffolding in STEM Education

PubMed Central

Belland, Brian R.; Walker, Andrew E.; Kim, Nam Ju; Lefler, Mason

2016-01-01

Computer-based scaffolding assists students as they generate solutions to complex problems, goals, or tasks, helping increase and integrate their higher order skills in the process. However, despite decades of research on scaffolding in STEM (science, technology, engineering, and mathematics) education, no existing comprehensive meta-analysis has synthesized the results of these studies. This review addresses that need by synthesizing the results of 144 experimental studies (333 outcomes) on the effects of computer-based scaffolding designed to assist the full range of STEM learners (primary through adult education) as they navigated ill-structured, problem-centered curricula. Results of our random effect meta-analysis (a) indicate that computer-based scaffolding showed a consistently positive (ḡ = 0.46) effect on cognitive outcomes across various contexts of use, scaffolding characteristics, and levels of assessment and (b) shed light on many scaffolding debates, including the roles of customization (i.e., fading and adding) and context-specific support. Specifically, scaffolding’s influence on cognitive outcomes did not vary on the basis of context-specificity, presence or absence of scaffolding change, and logic by which scaffolding change is implemented. Scaffolding’s influence was greatest when measured at the principles level and among adult learners. Still scaffolding’s effect was substantial and significantly greater than zero across all age groups and assessment levels. These results suggest that scaffolding is a highly effective intervention across levels of different characteristics and can largely be designed in many different ways while still being highly effective. PMID:28344365

Synthesizing Results From Empirical Research on Computer-Based Scaffolding in STEM Education: A Meta-Analysis.

PubMed

Belland, Brian R; Walker, Andrew E; Kim, Nam Ju; Lefler, Mason

2017-04-01

Computer-based scaffolding assists students as they generate solutions to complex problems, goals, or tasks, helping increase and integrate their higher order skills in the process. However, despite decades of research on scaffolding in STEM (science, technology, engineering, and mathematics) education, no existing comprehensive meta-analysis has synthesized the results of these studies. This review addresses that need by synthesizing the results of 144 experimental studies (333 outcomes) on the effects of computer-based scaffolding designed to assist the full range of STEM learners (primary through adult education) as they navigated ill-structured, problem-centered curricula. Results of our random effect meta-analysis (a) indicate that computer-based scaffolding showed a consistently positive (ḡ = 0.46) effect on cognitive outcomes across various contexts of use, scaffolding characteristics, and levels of assessment and (b) shed light on many scaffolding debates, including the roles of customization (i.e., fading and adding) and context-specific support. Specifically, scaffolding's influence on cognitive outcomes did not vary on the basis of context-specificity, presence or absence of scaffolding change, and logic by which scaffolding change is implemented. Scaffolding's influence was greatest when measured at the principles level and among adult learners. Still scaffolding's effect was substantial and significantly greater than zero across all age groups and assessment levels. These results suggest that scaffolding is a highly effective intervention across levels of different characteristics and can largely be designed in many different ways while still being highly effective.

ICCE/ICCAI 2000 Full & Short Papers (Web-Based Learning).

ERIC Educational Resources Information Center

2000

This document contains full and short papers on World Wide Web-based learning from ICCE/ICCAI 2000 (International Conference on Computers in Education/International Conference on Computer-Assisted Instruction). Topics covered include: design and development of CAL (Computer Assisted Learning) systems; design and development of WBI (Web-Based…

Robotics: Using Technology to Teach New Technologies.

ERIC Educational Resources Information Center

Cohen, Karen C.; Meyer, Carol D.

1984-01-01

Discusses the development of industrial robotics training materials, considering the need for such materials, preliminary curriculum design, the Piagetian approach followed, and the uses of computer assisted instruction. A list of robotics curriculum courses (with content and audience indicated) is included. (JN)

Innovative Technology in Engineering Education.

ERIC Educational Resources Information Center

Fishwick, Wilfred

1991-01-01

Discusses the impact that computer-assisted technologies, including applications to software, video recordings, and satellite broadcasts, have had upon the conventions and procedures within engineering education. Calls for the complete utilization of such devices through their appropriate integration into updated education activities effectively…

Lung assist device technology with physiologic blood flow developed on a tissue engineered scaffold platform.

PubMed

Hoganson, David M; Pryor, Howard I; Bassett, Erik K; Spool, Ira D; Vacanti, Joseph P

2011-02-21

There is no technology available to support failing lung function for patients outside the hospital. An implantable lung assist device would augment lung function as a bridge to transplant or possible destination therapy. Utilizing biomimetic design principles, a microfluidic vascular network was developed for blood inflow from the pulmonary artery and blood return to the left atrium. Computational fluid dynamics analysis was used to optimize blood flow within the vascular network. A micro milled variable depth mold with 3D features was created to achieve both physiologic blood flow and shear stress. Gas exchange occurs across a thin silicone membrane between the vascular network and adjacent alveolar chamber with flowing oxygen. The device had a surface area of 23.1 cm(2) and respiratory membrane thickness of 8.7 ± 1.2 μm. Carbon dioxide transfer within the device was 156 ml min(-1) m(-2) and the oxygen transfer was 34 ml min(-1) m(-2). A lung assist device based on tissue engineering architecture achieves gas exchange comparable to hollow fiber oxygenators yet does so while maintaining physiologic blood flow. This device may be scaled up to create an implantable ambulatory lung assist device.

The Academy in the Age of Digital Labor

ERIC Educational Resources Information Center

Glaros, Michelle

2004-01-01

In this article, the author addresses a problem encountered in her own professional life as a teacher of writing in the context of computing, a teaching field often referred to as "computers and writing," "electronic writing," or "computer-assisted writing instruction." The problem she has observed has to do with teaching technology in a…

4-6 Computer Awareness. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Computer Services Branch.

This guide was developed to assist teachers in achieving goals related to the development of computer awareness in students in grades 4-6 in the Canadian province of Manitoba. An overview of the program describes a set of basic concepts, skills, and attitudes relating to computer technology, and provides information on activities that can be used…

Handheld Computers: A Boon for Principals

ERIC Educational Resources Information Center

Brazell, Wayne

2005-01-01

As I reflect on my many years as an elementary school principal, I realize how much more effective I would have been if I had owned a wireless handheld computer. This relatively new technology can provide considerable assistance to today?s principals and recent advancements have increased its functions and capacity. Handheld computers are…

Computer-Mediated Communication as an Autonomy-Enhancement Tool for Advanced Learners of English

ERIC Educational Resources Information Center

Wach, Aleksandra

2012-01-01

This article examines the relevance of modern technology for the development of learner autonomy in the process of learning English as a foreign language. Computer-assisted language learning and computer-mediated communication (CMC) appear to be particularly conducive to fostering autonomous learning, as they naturally incorporate many elements of…

CAA: Computer Assisted Athletics.

ERIC Educational Resources Information Center

Hall, John H.

Computers have been used in a variety of applications for athletics since the late 1950's. These have ranged from computer-controlled electric scoreboards to computer-designed pole vaulting poles. Described in this paper are a computer-based athletic injury reporting system and a computer-assisted football scouting system. The injury reporting…

United States Air Force Summer Faculty Research Program (1987). Program Technical Report. Volume 1.

DTIC Science & Technology

1987-12-01

Mechanical Engineering Specialty: Engineering Science Rose-Hulman Institute Assigned: APL 5500 Wabash Avenue - Terre Haute, IN 47803 (812) 877-1511 Dr...Professor/Di rector 1973 Dept. of Humanities Specialty: Literature/Language Rose-Hulman Inst. of Technology Assigned: HRL/LR 5500 Wabash Avenue - Terre...1976 Assistant Professor Specialty: Computer Science Dept. of Computer Science Assigned: AL Rose-Hulman Inst. of Technology 5500 Wabash Ave. Terre Haute

NASA Exhibits

NASA Technical Reports Server (NTRS)

Deardorff, Glenn; Djomehri, M. Jahed; Freeman, Ken; Gambrel, Dave; Green, Bryan; Henze, Chris; Hinke, Thomas; Hood, Robert; Kiris, Cetin; Moran, Patrick;

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers these occupations: manufacturing technician, computer-assisted design and drafting (CADD) technician, quality technician, and mechanical technician. Section 1 provides occupation definitions. Section 2 lists development committee members. Section 3 provides the leveling codes---abbreviations for grade level…

New Media for Workers' Education and Training.

ERIC Educational Resources Information Center

Labour Education, 1995

1995-01-01

Includes "Introduction"; "Part One: Towards a New Technological System"; "Part Two: Communications and Training"; "Part Three: Production and Distribution of Media"; glossary; and 77-item bibliography. Covers the use of audiovisual aids, computer-assisted instruction, telecommunications, video, optical media, and computer networks for labor…

Financial Management Assistant.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This publication contains 19 subjects appropriate for use in a competency list for the occupation of financial management assistant, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 19 units are as…

Performance, Cognitive Load, and Behaviour of Technology-Assisted English Listening Learning: From CALL to MALL

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Warden, Clyde A.; Liang, Chaoyun; Chou, Pao-Nan

2018-01-01

This study examines differences in English listening comprehension, cognitive load, and learning behaviour between outdoor ubiquitous learning and indoor computer-assisted learning. An experimental design, employing a pretest-posttest control group is employed. Randomly assigned foreign language university majors joined either the experimental…

Technohubs in Teacher Education: The Lived Experience of Assisting Peers with Instructional Technology Issues

ERIC Educational Resources Information Center

Rook, Michael Montalto

2014-01-01

This study examined prospective teachers' lived experiences of assisting peers with instructional technology issues. The study built upon one of ISTE's (2003) essential conditions for integrating technology in education: technical assistance for using technology. Through a review of relevant literature, an argument was made for the study based on…

Personal diabetes management system based on ubiquitous computing technology.

PubMed

Park, Kyung-Soon; Kim, Nam-Jin; Hong, Joo-Hyun; Park, Mi-Sook; Cha, Eun-Jung; Lee, Tae-Soo

2006-01-01

Assisting diabetes patients to self manage blood glucose test and insulin injection is of great importance for their healthcare. This study presented a PDA based system to manage the personal glucose level data interfaced with a small glucometer through a serial port. The data stored in the PDA can be transmitted by cradle or wireless communication to the remote web-server, where further medical analysis and service is provided. This system enables more efficient and systematic management of diabetes patients through self management and remote medical practice.

Computer-Assisted Hip and Knee Arthroplasty. Navigation and Active Robotic Systems

PubMed Central

2004-01-01

Executive Summary Objective The Medical Advisory Secretariat undertook a review of the evidence on the effectiveness and cost-effectiveness of computer assisted hip and knee arthroplasty. The two computer assisted arthroplasty systems that are the topics of this review are (1) navigation and (2) robotic-assisted hip and knee arthroplasty. The Technology Computer-assisted arthroplasty consists of navigation and robotic systems. Surgical navigation is a visualization system that provides positional information about surgical tools or implants relative to a target bone on a computer display. Most of the navigation-assisted arthroplasty devices that are the subject of this review are licensed by Health Canada. Robotic systems are active robots that mill bone according to information from a computer-assisted navigation system. The robotic-assisted arthroplasty devices that are the subject of this review are not currently licensed by Health Canada. Review Strategy The Cochrane and International Network of Agencies for Health Technology Assessment databases did not identify any health technology assessments on navigation or robotic-assisted hip or knee arthroplasty. The MEDLINE and EMBASE databases were searched for articles published between January 1, 1996 and November 30, 2003. This search produced 367 studies, of which 9 met the inclusion criteria. Summary of Findings Navigation-Assisted Arthroplasty Five studies were identified that examined navigation-assisted arthroplasty. A Level 1 evidence study from Germany found a statistically significant difference in alignment and angular deviation between navigation-assisted and free-hand total knee arthroplasty in favour of navigation-assisted surgery. However, the endpoints in this study were short-term. To date, the long-term effects (need for revision, implant longevity, pain, functional performance) are unknown.(1) A Level 2 evidence short-term study found that navigation-assisted total knee arthroplasty was significantly better than a non-navigated procedure for one of five postoperative measured angles.(2) A Level 2 evidence short-term study found no statistically significant difference in the variation of the abduction angle between navigation-assisted and conventional total hip arthroplasty.(3) Level 3 evidence observational studies of navigation-assisted total knee arthroplasty and unicompartmental knee arthroplasty have been conducted. Two studies reported that “the follow-up of the navigated prostheses is currently too short to know if clinical outcome or survival rates are improved. Longer follow-up is required to determine the respective advantages and disadvantages of both techniques.”(4;5) Robotic-Assisted Arthroplasty Four studies were identified that examined robotic-assisted arthroplasty. A Level 1 evidence study revealed that there was no statistically significant difference between functional hip scores at 24 months post implantation between patients who underwent robotic-assisted primary hip arthroplasty and those that were treated with manual implantation.(6) Robotic-assisted arthroplasty had advantages in terms of preoperative planning and the accuracy of the intraoperative procedure.(6) Patients who underwent robotic-assisted hip arthroplasty had a higher dislocation rate and more revisions.(6) Robotic-assisted arthroplasty may prove effective with certain prostheses (e.g., anatomic) because their use may result in less muscle detachment.(6) An observational study (Level 3 evidence) found that the incidence of severe embolic events during hip relocation was lower with robotic arthroplasty than with manual surgery.(7) An observational study (Level 3 evidence) found that there was no significant difference in gait analyses of patients who underwent robotic-assisted total hip arthroplasty using robotic surgery compared to patients who were treated with conventional cementless total hip arthroplasty.(8) An observational study (Level 3 evidence) compared outcomes of total knee arthroplasty between patients undergoing robotic surgery and patients who were historical controls. Brief, qualitative results suggested that there was much broader variation of angles after manual total knee arthroplasty compared to the robotic technique and that there was no difference in knee functional scores or implant position at the 3 and 6 month follow-up.(9) PMID:23074452

Technology for the Nineties. RESNA '91: Proceedings of the Annual Conference (14th, Kansas City, Missouri, June 21-26, 1991).

ERIC Educational Resources Information Center

Presperin, Jessica J., Ed.

This proceedings document contains approximately 150 papers and 50 poster sessions presented at a conference on the advancement of rehabilitation and assistive technology. Individual sessions focused on the following topics: gerontology, robotics, technology transfer, sensory aids, computer applications, information dissemination, service delivery…

Practices and Preferences among Students Who Read Braille and Use Assistive Technology

ERIC Educational Resources Information Center

D'Andrea, Frances Mary

2010-01-01

An increased emphasis on the use of technology and the focus on "multiliteracies" in the classroom has great implications for both teachers and students regarding the expectation that all students will become skilled and critical users of computers and other technology for literacy-related tasks. Students who are braille readers use…

The Role of Technology in Teaching Languages for Specific Purposes Courses

ERIC Educational Resources Information Center

Arno-Macia, Elisabet

2012-01-01

Within the integration of technology into language education, special attention needs to be paid to languages for specific purposes (LSP), drawing on developments in computer-assisted language learning and applied linguistics, on the one hand, and on the pervasive use of technology in academic and professional communication, on the other. From a…

Overcoming Research Design Problems via Methodological Integration: Use of Computer Assisted Technologies in Studying Teacher Behaviors.

ERIC Educational Resources Information Center

Ivy, Diana K.; And Others

Continuous Attitudinal Response Technology (CART) is an alternative approach to testing students' instantaneous response to teacher behaviors in the classroom. The system uses a microcomputer and video technology device that allows researchers to measure subjects' instantaneous responses to static and continuous stimuli, graphic or verbal. A…

Implicit prosody mining based on the human eye image capture technology

NASA Astrophysics Data System (ADS)

Gao, Pei-pei; Liu, Feng

2013-08-01

The technology of eye tracker has become the main methods of analyzing the recognition issues in human-computer interaction. Human eye image capture is the key problem of the eye tracking. Based on further research, a new human-computer interaction method introduced to enrich the form of speech synthetic. We propose a method of Implicit Prosody mining based on the human eye image capture technology to extract the parameters from the image of human eyes when reading, control and drive prosody generation in speech synthesis, and establish prosodic model with high simulation accuracy. Duration model is key issues for prosody generation. For the duration model, this paper put forward a new idea for obtaining gaze duration of eyes when reading based on the eye image capture technology, and synchronous controlling this duration and pronunciation duration in speech synthesis. The movement of human eyes during reading is a comprehensive multi-factor interactive process, such as gaze, twitching and backsight. Therefore, how to extract the appropriate information from the image of human eyes need to be considered and the gaze regularity of eyes need to be obtained as references of modeling. Based on the analysis of current three kinds of eye movement control model and the characteristics of the Implicit Prosody reading, relative independence between speech processing system of text and eye movement control system was discussed. It was proved that under the same text familiarity condition, gaze duration of eyes when reading and internal voice pronunciation duration are synchronous. The eye gaze duration model based on the Chinese language level prosodic structure was presented to change previous methods of machine learning and probability forecasting, obtain readers' real internal reading rhythm and to synthesize voice with personalized rhythm. This research will enrich human-computer interactive form, and will be practical significance and application prospect in terms of disabled assisted speech interaction. Experiments show that Implicit Prosody mining based on the human eye image capture technology makes the synthesized speech has more flexible expressions.

Implementation of audio computer-assisted interviewing software in HIV/AIDS research.

PubMed

Pluhar, Erika; McDonnell Holstad, Marcia; Yeager, Katherine A; Denzmore-Nwagbara, Pamela; Corkran, Carol; Fielder, Bridget; McCarty, Frances; Diiorio, Colleen

2007-01-01

Computer-assisted interviewing (CAI) has begun to play a more prominent role in HIV/AIDS prevention research. Despite the increased popularity of CAI, particularly audio computer-assisted self-interviewing (ACASI), some research teams are still reluctant to implement ACASI technology because of lack of familiarity with the practical issues related to using these software packages. The purpose of this report is to describe the implementation of one particular ACASI software package, the Questionnaire Development System (QDS; Nova Research Company, Bethesda, MD), in several nursing and HIV/AIDS prevention research settings. The authors present acceptability and satisfaction data from two large-scale public health studies in which they have used QDS with diverse populations. They also address issues related to developing and programming a questionnaire; discuss practical strategies related to planning for and implementing ACASI in the field, including selecting equipment, training staff, and collecting and transferring data; and summarize advantages and disadvantages of computer-assisted research methods.

The future: biomarkers, biosensors, neuroinformatics, and e-neuropsychiatry.

PubMed

Lowe, Christopher R

2011-01-01

The emergence of molecular biomarkers for psychological, psychiatric, and neurodegenerative disorders is beginning to change current diagnostic paradigms for this debilitating family of mental illnesses. The development of new genomic, proteomic, and metabolomic tools has created the prospect of sensitive and specific biochemical tests to replace traditional pen-and-paper questionnaires. In the future, the realization of biosensor technologies, point-of-care testing, and the fusion of clinical biomarker data, electroencephalogram, and MRI data with the patient's past medical history, biopatterns, and prognosis may create personalized bioprofiles or fingerprints for brain disorders. Further, the application of mobile communications technology and grid computing to support data-, computation- and knowledge-based tasks will assist disease prediction, diagnosis, prognosis, and compliance monitoring. It is anticipated that, ultimately, mobile devices could become the next generation of personalized pharmacies. Copyright © 2011 Elsevier Inc. All rights reserved.

The Efficacy of the Internet-Based Blackboard Platform in Developmental Writing Classes

ERIC Educational Resources Information Center

Shudooh, Yusuf M.

2016-01-01

The application of computer-assisted platforms in writing classes is a relatively new paradigm in education. The adoption of computers-assisted writing classes is gaining ground in many western and non western universities. Numerous issues can be addressed when conducting computer-assisted classes (CAC). However, a few studies conducted to assess…

Computer-assisted photogrammetric mapping systems for geologic studies-A progress report

USGS Publications Warehouse

Pillmore, C.L.; Dueholm, K.S.; Jepsen, H.S.; Schuch, C.H.

1981-01-01

Photogrammetry has played an important role in geologic mapping for many years; however, only recently have attempts been made to automate mapping functions for geology. Computer-assisted photogrammetric mapping systems for geologic studies have been developed and are currently in use in offices of the Geological Survey of Greenland at Copenhagen, Denmark, and the U.S. Geological Survey at Denver, Colorado. Though differing somewhat, the systems are similar in that they integrate Kern PG-2 photogrammetric plotting instruments and small desk-top computers that are programmed to perform special geologic functions and operate flat-bed plotters by means of specially designed hardware and software. A z-drive capability, in which stepping motors control the z-motions of the PG-2 plotters, is an integral part of both systems. This feature enables the computer to automatically position the floating mark on computer-calculated, previously defined geologic planes, such as contacts or the base of coal beds, throughout the stereoscopic model in order to improve the mapping capabilities of the instrument and to aid in correlation and tracing of geologic units. The common goal is to enhance the capabilities of the PG-2 plotter and provide a means by which geologists can make conventional geologic maps more efficiently and explore ways to apply computer technology to geologic studies. ?? 1981.

A Genetic Algorithm Approach to Motion Sensor Placement in Smart Environments.

PubMed

Thomas, Brian L; Crandall, Aaron S; Cook, Diane J

2016-04-01

Smart environments and ubiquitous computing technologies hold great promise for a wide range of real world applications. The medical community is particularly interested in high quality measurement of activities of daily living. With accurate computer modeling of older adults, decision support tools may be built to assist care providers. One aspect of effectively deploying these technologies is determining where the sensors should be placed in the home to effectively support these end goals. This work introduces and evaluates a set of approaches for generating sensor layouts in the home. These approaches range from the gold standard of human intuition-based placement to more advanced search algorithms, including Hill Climbing and Genetic Algorithms. The generated layouts are evaluated based on their ability to detect activities while minimizing the number of needed sensors. Sensor-rich environments can provide valuable insights about adults as they go about their lives. These sensors, once in place, provide information on daily behavior that can facilitate an aging-in-place approach to health care.

A Genetic Algorithm Approach to Motion Sensor Placement in Smart Environments

PubMed Central

Thomas, Brian L.; Crandall, Aaron S.; Cook, Diane J.

2016-01-01

Smart environments and ubiquitous computing technologies hold great promise for a wide range of real world applications. The medical community is particularly interested in high quality measurement of activities of daily living. With accurate computer modeling of older adults, decision support tools may be built to assist care providers. One aspect of effectively deploying these technologies is determining where the sensors should be placed in the home to effectively support these end goals. This work introduces and evaluates a set of approaches for generating sensor layouts in the home. These approaches range from the gold standard of human intuition-based placement to more advanced search algorithms, including Hill Climbing and Genetic Algorithms. The generated layouts are evaluated based on their ability to detect activities while minimizing the number of needed sensors. Sensor-rich environments can provide valuable insights about adults as they go about their lives. These sensors, once in place, provide information on daily behavior that can facilitate an aging-in-place approach to health care. PMID:27453810

ACSYNT - A standards-based system for parametric, computer aided conceptual design of aircraft

NASA Technical Reports Server (NTRS)

Jayaram, S.; Myklebust, A.; Gelhausen, P.

1992-01-01

A group of eight US aerospace companies together with several NASA and NAVY centers, led by NASA Ames Systems Analysis Branch, and Virginia Tech's CAD Laboratory agreed, through the assistance of Americal Technology Initiative, in 1990 to form the ACSYNT (Aircraft Synthesis) Institute. The Institute is supported by a Joint Sponsored Research Agreement to continue the research and development in computer aided conceptual design of aircraft initiated by NASA Ames Research Center and Virginia Tech's CAD Laboratory. The result of this collaboration, a feature-based, parametric computer aided aircraft conceptual design code called ACSYNT, is described. The code is based on analysis routines begun at NASA Ames in the early 1970's. ACSYNT's CAD system is based entirely on the ISO standard Programmer's Hierarchical Interactive Graphics System and is graphics-device independent. The code includes a highly interactive graphical user interface, automatically generated Hermite and B-Spline surface models, and shaded image displays. Numerous features to enhance aircraft conceptual design are described.

Implementation of Health Information Technology in Routine Care for Fibromyalgia: Pilot Study.

PubMed

Sparks, Toni; Kawi, Jennifer; Menzel, Nancy Nivison; Hartley, Kendall

2016-02-01

Fibromyalgia management remains complicated and challenging. Health information technology is an evidence-based, nonpharmacological self and symptom management strategy, but few studies have evaluated its feasibility for managing fibromyalgia patients in clinical practice. FibroGuide is an example of an evidence-based, interactive, and computer-based program comprised of 10 educational modules on fibromyalgia. Study aims were to: (1) develop a process for implementing FibroGuide into the routine care of patients with fibromyalgia, (2) evaluate the overall impact on fibromyalgia before and after a 12-week implementation, and (3) assess patient perspectives on using FibroGuide health information technology to assist in self-management. In this pilot study, 35 participants with fibromyalgia were recruited from an Advanced Practice Registered Nurse's outpatient clinic. Using a descriptive design, quantitative data analysis was employed to address study aims. Based on data collection pre- and post-intervention using paired samples testing, a statistically significant change (p = .017) was observed in overall fibromyalgia impact (improved symptom severity, activity, and function). Majority felt that FibroGuide was helpful as part of their routine care, and nearly half reported that it assisted in their self-management. Although 65% noted that technology was an effective and efficient way to receive education for fibromyalgia management, 57% preferred talking to healthcare providers. Larger longitudinal studies are needed on the use of health information technology in fibromyalgia, evaluating both statistical and clinical significance, while decreasing barriers to participant use for this promising adjunct to clinical management. Providers need to be well educated on supporting self-management strategies and health information technology. Copyright © 2016 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Computer-assisted design of flux-cored wires

NASA Astrophysics Data System (ADS)

Dubtsov, Yu N.; Zorin, I. V.; Sokolov, G. N.; Antonov, A. A.; Artem'ev, A. A.; Lysak, V. I.

2017-02-01

The algorithm and description of the AlMe-WireLaB software for the computer-assisted design of flux-cored wires are introduced. The software functionality is illustrated with the selection of the components for the flux-cored wire, ensuring the acquisition of the deposited metal of the Fe-Cr-C-Mo-Ni-Ti-B system. It is demonstrated that the developed software enables the technologically reliable flux-cored wire to be designed for surfacing, resulting in a metal of an ordered composition.

ICCE/ICCAI 2000 Full & Short Papers (Others).

ERIC Educational Resources Information Center

2000

This document contains the following full and short papers from ICCE/ICCAI 2000 (International Conference on Computers in Education/International Conference on Computer-Assisted Instruction): (1) "A Code Restructuring Tool To Help Scaffold Novice Programmers" (Stuart Garner); (2) "An Assessment Framework for Information Technology Integrated…

Validating a measure to assess factors that affect assistive technology use by students with disabilities in elementary and secondary education.

PubMed

Zapf, Susan A; Scherer, Marcia J; Baxter, Mary F; H Rintala, Diana

2016-01-01

The purpose of this study was to measure the predictive validity, internal consistency and clinical utility of the Matching Assistive Technology to Child & Augmentative Communication Evaluation Simplified (MATCH-ACES) assessment. Twenty-three assistive technology team evaluators assessed 35 children using the MATCH-ACES assessment. This quasi-experimental study examined the internal consistency, predictive validity and clinical utility of the MATCH-ACES assessment. The MATCH-ACES assessment predisposition scales had good internal consistency across all three scales. A significant relationship was found between (a) high student perseverance and need for assistive technology and (b) high teacher comfort and interest in technology use (p = (0).002). Study results indicate that the MATCH-ACES assessment has good internal consistency and validity. Predisposition characteristics of student and teacher combined can influence the level of assistive technology use; therefore, assistive technology teams should assess predisposition factors of the user when recommending assistive technology. Implications for Rehabilitation Educational and medical professionals should be educated on evidence-based assistive technology assessments. Personal experience and psychosocial factors can influence the outcome use of assistive technology. Assistive technology assessments must include an intervention plan for assistive technology service delivery to measure effective outcome use.

Assistive technologies for self-managed pressure ulcer prevention in spinal cord injury: a scoping review.

PubMed

Tung, James Y; Stead, Brent; Mann, William; Ba'Pham; Popovic, Milos R

2015-01-01

Pressure ulcers (PUs) in individuals with spinal cord injury (SCI) present a persistent and costly problem. Continuing effort in developing new technologies that support self-managed care is an important prevention strategy. Specifically, the aims of this scoping review are to review the key concepts and factors related to self-managed prevention of PUs in individuals with SCI and appraise the technologies available to assist patients in self-management of PU prevention practices. There is broad consensus that sustaining long-term adherence to prevention regimens is a major concern. Recent literature highlights the interactions between behavioral and physiological risk factors. We identify four technology categories that support self-management: computer-based educational technologies demonstrated improved short-term gains in knowledge (2 studies), interface pressure mapping technologies demonstrated improved adherence to pressure-relief schedules up to 3 mo (5 studies), electrical stimulation confirmed improvements in tissue tolerance after 8 wk of training (3 studies), and telemedicine programs demonstrated improvements in independence and reduced hospital visits over 6 mo (2 studies). Overall, self-management technologies demonstrated low-to-moderate effectiveness in addressing a subset of risk factors. However, the effectiveness of technologies in preventing PUs is limited due to a lack of incidence reporting. In light of the key findings, we recommend developing integrated technologies that address multiple risk factors.

Using Surface Table Computers to Promote the Well-Being of People with Dementia.

PubMed

Bejan, Alexander; Murko, Patrizia; Müller, Nadine; König, Peter; Kunze, Christophe

2017-01-01

As the demographic change progresses, dementia is going to become a prevalent condition in many countries. In order to keep the Quality of Life (QoL) of People with Dementia (PwD) on a steady level, Assistive Technologies (AT) implemented on table-sized Surface Computers (SC) that promote playful and/or reminiscence-triggering activities turn out to be valuable tools for dementia care. This article gives an overview over two similar multimedia-based AT systems implemented on Microsoft PixelSense SCs and field-tested in dementia care institutions. The observations indicate that both systems can trigger positive emotions and activities as well as memories.

'Designing Ambient Interactions - Pervasive Ergonomic Interfaces for Ageing Well' (DAI'10)

NASA Astrophysics Data System (ADS)

Geven, Arjan; Prost, Sebastian; Tscheligi, Manfred; Soldatos, John; Gonzalez, Mari Feli

The workshop will focus on novel computer based interaction mechanisms and interfaces, which boost natural interactivity and obviate the need for conventional tedious interfaces. Such interfaces are increasingly used in ambient intelligence environments and related applications, including application boosting elderly cognitive support, cognitive rehabilitation and Ambient Assisted Living (AAL). The aim of the workshop is to provide insights on the technological underpinnings of such interfaces, along with tools and techniques for their design and evaluation.

The computer in office medical practice.

PubMed

Dowdle, John

2002-04-01

There will continue to be change and evolution in the medical office environment. As voice recognition systems continue to improve, instant creation of office notes with the absence of dictation may be commonplace. As medical and computer technology evolves, we must continue to evaluate the many new computer systems that can assist us in our clinical office practice.

Hybrid Human-Computing Distributed Sense-Making: Extending the SOA Paradigm for Dynamic Adjudication and Optimization of Human and Computer Roles

ERIC Educational Resources Information Center

Rimland, Jeffrey C.

2013-01-01

In many evolving systems, inputs can be derived from both human observations and physical sensors. Additionally, many computation and analysis tasks can be performed by either human beings or artificial intelligence (AI) applications. For example, weather prediction, emergency event response, assistive technology for various human sensory and…

Inclusion of Mobility-Impaired Children in the One-to-One Computing Era: A Case Study

ERIC Educational Resources Information Center

Mangiatordi, Andrea

2012-01-01

In recent times many developing countries have adopted a one-to-one model for distributing computers in classrooms. Among the various effects that such an approach could imply, it surely increases the availability of computer-related Assistive Technology at school and provides higher resources for empowering disabled children in their learning and…

Histopathological Image Analysis: A Review

PubMed Central

Gurcan, Metin N.; Boucheron, Laura; Can, Ali; Madabhushi, Anant; Rajpoot, Nasir; Yener, Bulent

2010-01-01

Over the past decade, dramatic increases in computational power and improvement in image analysis algorithms have allowed the development of powerful computer-assisted analytical approaches to radiological data. With the recent advent of whole slide digital scanners, tissue histopathology slides can now be digitized and stored in digital image form. Consequently, digitized tissue histopathology has now become amenable to the application of computerized image analysis and machine learning techniques. Analogous to the role of computer-assisted diagnosis (CAD) algorithms in medical imaging to complement the opinion of a radiologist, CAD algorithms have begun to be developed for disease detection, diagnosis, and prognosis prediction to complement to the opinion of the pathologist. In this paper, we review the recent state of the art CAD technology for digitized histopathology. This paper also briefly describes the development and application of novel image analysis technology for a few specific histopathology related problems being pursued in the United States and Europe. PMID:20671804

Manufacturing Technology.

ERIC Educational Resources Information Center

Liu, Yuan H.; And Others

1994-01-01

Includes "Integrating Coursework in Design with Industry Projects" (Liu); "A 'Perfect' Project--Computer Assisted Manufacturing, Fabrication, and Recycling All in One" (Anderson); and "Fluid Sensing and Control" (Hawkins, Hardy). (SK)

Application Of The CSRL Language To The Design Of Diagnostic Expert Systems: The Moodis Experience, A Preliminary Report

NASA Astrophysics Data System (ADS)

Bravos, Angelo; Hill, Howard; Choca, James; Bresolin, Linda B.; Bresolin, Michael J.

1986-03-01

Computer technology is rapidly becoming an inseparable part of many health science specialties. Recently, a new area of computer technology, namely Artificial Intelligence, has been applied toward assisting the medical experts in their diagnostic and therapeutic decision making process. MOODIS is an experimental diagnostic expert system which assists Psychiatry specialists in diagnosing human Mood Disorders, better known as Affective Disorders. Its diagnostic methodology is patterned after MDX, a diagnostic expert system developed at LAIR (Laboratory for Artificial Intelligence Research) of Ohio State University. MOODIS is implemented in CSRL (Conceptual Structures Representation Language) also developed at LAIR. This paper describes MOODIS in terms of conceptualization and requirements, and discusses why the MDX approach and CSRL were chosen.

Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions

PubMed Central

Hall, Cristin M.; Bierman, Karen L.

2016-01-01

Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery. PMID:27773964

Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions.

PubMed

Hall, Cristin M; Bierman, Karen L

Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery.

Learning Resources and Technology. A Guide to Program Development.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford.

This guide provides a framework to assist all Connecticut school districts in planning effective learning resources centers and educational technology programs capable of providing: a well developed library media component; shared instructional design responsibilities; reading for enrichment; integration of computers into instruction; distance…

The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

ERIC Educational Resources Information Center

Seo, You-Jin; Woo, Honguk

2010-01-01

Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabeel, A.; Khan, M.A.; Husain, S.

Coal is the most abundant source of energy. However, there is a need to develop cleaner, and more efficient, economical, and convenient coal conversion technologies. It is important to understand the organic chemical structure of coal for achieving real breakthroughs in the development of such coal conversion technologies. A novel computer-assisted modeling technique based on the analysis of {sup 13}C NMR and gel permeation chromatography has been applied to predict the average molecular structure of the acetylated product of a depolymerized bituminous Indian coal. The proposed molecular structure may be of practical use in understanding the mechanism of coal conversionsmore » during the processes of liquefaction, gasification, combustion, and carbonization.« less

The Penn State Heart Assistant: A pilot study of a web-based intervention to improve self-care of heart failure patients.

PubMed

Lloyd, Tom; Buck, Harleah; Foy, Andrew; Black, Sara; Pinter, Antony; Pogash, Rosanne; Eismann, Bobby; Balaban, Eric; Chan, John; Kunselman, Allen; Smyth, Joshua; Boehmer, John

2017-05-01

The Penn State Heart Assistant, a web-based, tablet computer-accessed, secure application was developed to conduct a proof of concept test, targeting patient self-care activities of heart failure patients including daily medication adherence, weight monitoring, and aerobic activity. Patients (n = 12) used the tablet computer-accessed program for 30 days-recording their information and viewing a short educational video. Linear random coefficient models assessed the relationship between weight and time and exercise and time. Good medication adherence (66% reporting taking 75% of prescribed medications) was reported. Group compliance over 30 days for weight and exercise was 84 percent. No persistent weight gain over 30 days, and some indication of weight loss (slope of weight vs time was negative (-0.17; p value = 0.002)), as well as increased exercise (slope of exercise vs time was positive (0.08; p value = 0.04)) was observed. This study suggests that mobile technology is feasible, acceptable, and has potential for cost-effective opportunities to manage heart failure patients safely at home.

Teachers' Initial and Sustained Use of an Instructional Assistive Technology Tool: Exploring the Mitigating Factors

ERIC Educational Resources Information Center

Bouck, Emily C.; Flanagan, Sara; Heutsche, Anne; Okolo, Cynthia M.; Englert, Carol Sue

2011-01-01

This qualitative research project explored factors that mitigated teachers implementing an instructional assistive technology and factors that mitigated its sustained use. Specifically, it explored these issues in relation to a social studies based instructional assistive technology (Virtual History Museum [VHM]), which was originally implemented…

An Adaptive Dynamic Pointing Assistance Program to Help People with Multiple Disabilities Improve Their Computer Pointing Efficiency with Hand Swing through a Standard Mouse

ERIC Educational Resources Information Center

Shih, Ching-Hsiang; Shih, Ching-Tien; Wu, Hsiao-Ling

2010-01-01

The latest research adopted software technology to redesign the mouse driver, and turned a mouse into a useful pointing assistive device for people with multiple disabilities who cannot easily or possibly use a standard mouse, to improve their pointing performance through a new operation method, Extended Dynamic Pointing Assistive Program (EDPAP),…

Making Together: An Interdisciplinary, Inter-institutional Assistive-Technology Project.

PubMed

Reiser, Susan; Bruce, Rebecca; Martin, Jackson; Skidmore, Brent

2017-01-01

Faculty at the University of North Carolina Asheville partnered with local healthcare professionals and retirement home residents and administrators on an assistive-technology project. The Creative Fabrication introductory computer science course incorporated subject-matter experts from the healthcare community, older and differently abled "users," medical students, and sculpture faculty. Over the semester, the class students created assistive devices to meet the needs of the retirement home residents. They prototyped their designs in foam and 3D modeling software and cast parts of their design in bronze or aluminum. User-centered design, the design process, and the importance of form and function were emphasized throughout the project.

High Tech/High Touch: A Synergy Applicable to Career Development.

ERIC Educational Resources Information Center

Pyle, K. Richard

1985-01-01

A method for using group counseling to enhance the learning and personal satisfaction of computer-assisted career guidance is discussed. The author states that this combination of the human and the technological element appears to have real power in assisting individuals to increase significantly their career maturity in a relatively short period…

45 CFR Appendix to Part 1308 - Head Start Program Performance Standards on Services to Children With Disabilities

Code of Federal Regulations, 2010 CFR

2010-10-01

... communication mode is enrolled, a parent, volunteer or aide who can use that mode of communication should be... of many children with disabilities who have communication problems, it has been found helpful to..., communication boards, computers and other assistive technology devices may be helpful. Technical assistance...

45 CFR Appendix to Part 1308 - Head Start Program Performance Standards on Services to Children With Disabilities

Code of Federal Regulations, 2014 CFR

2014-10-01

... communication mode is enrolled, a parent, volunteer or aide who can use that mode of communication should be... of many children with disabilities who have communication problems, it has been found helpful to..., communication boards, computers and other assistive technology devices may be helpful. Technical assistance...

45 CFR Appendix to Part 1308 - Head Start Program Performance Standards on Services to Children With Disabilities

Code of Federal Regulations, 2013 CFR

2013-10-01

... communication mode is enrolled, a parent, volunteer or aide who can use that mode of communication should be... of many children with disabilities who have communication problems, it has been found helpful to..., communication boards, computers and other assistive technology devices may be helpful. Technical assistance...

45 CFR Appendix to Part 1308 - Head Start Program Performance Standards on Services to Children With Disabilities

Code of Federal Regulations, 2012 CFR

2012-10-01

... communication mode is enrolled, a parent, volunteer or aide who can use that mode of communication should be... of many children with disabilities who have communication problems, it has been found helpful to..., communication boards, computers and other assistive technology devices may be helpful. Technical assistance...

An Assistive Computerized Learning Environment for Distance Learning Students with Learning Disabilities

ERIC Educational Resources Information Center

Klemes, Joel; Epstein, Alit; Zuker, Michal; Grinberg, Nira; Ilovitch, Tamar

2006-01-01

The current study examines how a computerized learning environment assists students with learning disabilities (LD) enrolled in a distance learning course at the Open University of Israel. The technology provides computer display of the text, synchronized with auditory output and accompanied by additional computerized study skill tools which…

The Effect of Automatic Speech Recognition Eyespeak Software on Iraqi Students' English Pronunciation: A Pilot Study

ERIC Educational Resources Information Center

Sidgi, Lina Fathi Sidig; Shaari, Ahmad Jelani

2017-01-01

The use of technology, such as computer-assisted language learning (CALL), is used in teaching and learning in the foreign language classrooms where it is most needed. One promising emerging technology that supports language learning is automatic speech recognition (ASR). Integrating such technology, especially in the instruction of pronunciation…

Technology & Disability: Research, Design, Practice, and Policy. Proceedings of the RESNA International Conference (25th, Minneapolis, Minnesota, June 27-July 1, 2002).

ERIC Educational Resources Information Center

Simpson, Richard, Ed.

These proceedings of the 2002 annual RESNA (Association for the Advancement of Rehabilitation Technology) conference include more than 200 presentations on all facets of assistive technology, including concurrent sessions, scientific platform sessions, interactive poster presentations, computer demonstrations, and the research symposium. The…

Model-based assist feature insertion for sub-40nm memory device

NASA Astrophysics Data System (ADS)

Suh, Sungsoo; Lee, Suk-joo; Choi, Seong-woon; Lee, Sung-Woo; Park, Chan-hoon

2009-04-01

Many issues need to be resolved for a production-worthy model based assist feature insertion flow for single and double exposure patterning process to extend low k1 process at 193 nm immersion technology. Model based assist feature insertion is not trivial to implement either for single and double exposure patterning compared to rule based methods. As shown in Fig. 1, pixel based mask inversion technology in itself has difficulties in mask writing and inspection although it presents as one of key technology to extend single exposure for contact layer. Thus far, inversion technology is tried as a cooptimization of target mask to simultaneously generate optimized main and sub-resolution assists features for a desired process window. Alternatively, its technology can also be used to optimize for a target feature after an assist feature types are inserted in order to simplify the mask complexity. Simplification of inversion mask is one of major issue with applying inversion technology to device development even if a smaller mask feature can be fabricated since the mask writing time is also a major factor. As shown in Figure 2, mask writing time may be a limiting factor in determining whether or not an inversion solution is viable. It can be reasoned that increased number of shot counts relates to increase in margin for inversion methodology. On the other hand, there is a limit on how complex a mask can be in order to be production worthy. There is also source and mask co-optimization which influences the final mask patterns and assist feature sizes and positions for a given target. In this study, we will discuss assist feature insertion methods for sub 40-nm technology.

Computer Assisted Communication within the Classroom: Interactive Lecturing.

ERIC Educational Resources Information Center

Herr, Richard B.

At the University of Delaware student-teacher communication within the classroom was enhanced through the implementation of a versatile, yet cost efficient, application of computer technology. A single microcomputer at a teacher's station controls a network of student keypad/display stations to provide individual channels of continuous…

Microcomputers in Higher Education.

ERIC Educational Resources Information Center

McLean, Robert S., Ed.; McLean, Ruth W., Ed.

1981-01-01

Some of the areas in which Ontario educators currently employ microcomputers in higher education are addressed in several articles, bibliographies, and book reviews. Various uses of computer-managed instruction and computer-assisted instruction (CAI) at Humber College of Applied Arts and Technology are outlined by Frank A. Ford. Microcomputer CAI…

A computer-assisted personnel data system for a hospital department of dietetics. I. Development of the data base.

PubMed

Shick, G L; Hoover, L W; Moore, A N

1979-04-01

A data base was developed for a computer-assisted personnel data system for a university hospital department of dietetics which would store data on employees' employment, personnel information, attendance records, and termination. Development of the data base required designing computer programs and files, coding directions and forms for card input, and forms and procedures for on-line transmission. A program was written to compute accrued vacation, sick leave, and holiday time, and to generate historical records.

Eye Tracking and Head Movement Detection: A State-of-Art Survey

PubMed Central

2013-01-01

Eye-gaze detection and tracking have been an active research field in the past years as it adds convenience to a variety of applications. It is considered a significant untraditional method of human computer interaction. Head movement detection has also received researchers' attention and interest as it has been found to be a simple and effective interaction method. Both technologies are considered the easiest alternative interface methods. They serve a wide range of severely disabled people who are left with minimal motor abilities. For both eye tracking and head movement detection, several different approaches have been proposed and used to implement different algorithms for these technologies. Despite the amount of research done on both technologies, researchers are still trying to find robust methods to use effectively in various applications. This paper presents a state-of-art survey for eye tracking and head movement detection methods proposed in the literature. Examples of different fields of applications for both technologies, such as human-computer interaction, driving assistance systems, and assistive technologies are also investigated. PMID:27170851

Computer-assisted generation of individual training concepts for advanced education in manufacturing metrology

NASA Astrophysics Data System (ADS)

Werner, Teresa; Weckenmann, Albert

2010-05-01

Due to increasing requirements on the accuracy and reproducibility of measurement results together with a rapid development of novel technologies for the execution of measurements, there is a high demand for adequately qualified metrologists. Accordingly, a variety of training offers are provided by machine manufacturers, universities and other institutions. Yet, for an interested learner it is very difficult to define an optimal training schedule for his/her individual demands. Therefore, a computer-based assistance tool is developed to support a demand-responsive scheduling of training. Based on the difference between the actual and intended competence profile and under consideration of amending requirements, an optimally customized qualification concept is derived. For this, available training offers are categorized according to different dimensions: regarding contents of the course, but also intended target groups, focus of the imparted competences, implemented methods of learning and teaching, expected constraints for learning and necessary preknowledge. After completing a course, the achieved competences and the transferability of gathered knowledge are evaluated. Based on the results, recommendations for amending measures of learning are provided. Thus, a customized qualification for manufacturing metrology is facilitated, adapted to the specific needs and constraints of each individual learner.

ASET Yearbook, Volume 4, 1979.

ERIC Educational Resources Information Center

Ausburn, Lynna J., Ed.

Included in this fourth annual yearbook are position papers, "how we do it" articles, research reports, and book reviews. The first four articles present information about the use of various technologies in instructional programs, i.e., computer assisted instruction at a college of advanced education, educational technology concepts and…

Identification of an educational production function for diverse technologies

NASA Technical Reports Server (NTRS)

Mcclung, R. L.

1977-01-01

Production function analysis used to estimate the cost effectiveness of three alternative technologies in higher education: traditional instruction, instructional television, and computer-assisted instruction is presented. Criteria and selection of a functional form are outlined and a general discussion of variable selection and measurement is presented.

Providing Access to Library Automation Systems for Students with Disabilities.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. High-Tech Center for the Disabled.

This document provides information on the integration of assistive computer technologies and library automation systems at California Community Colleges in order to ensure access for students with disabilities. Topics covered include planning, upgrading, purchasing, implementing and using these technologies with library systems. As information…

Middle Start Technology Facts.

ERIC Educational Resources Information Center

Holland, Holly

Equity is an important part of technology education. Without adequate equipment and training, schools shortchange students and limit their ability to compete with their more fortunate peers. This is especially important at the middle school level because computer assisted instruction not only taps into adolescents' natural curiosity, but also can…

Computer Assisted Thermography And Its Application In Ovulation Detection

NASA Astrophysics Data System (ADS)

Rao, K. H.; Shah, A. V.

1984-08-01

Hardware and software of a computer-assisted image analyzing system used for infrared images in medical applications are discussed. The application of computer-assisted thermography (CAT) as a complementary diagnostic tool in centralized diagnostic management is proposed. The authors adopted 'Computer Assisted Thermography' to study physiological changes in the breasts related to the hormones characterizing the menstrual cycle of a woman. Based on clinical experi-ments followed by thermal image analysis, they suggest that 'differential skin temperature (DST)1 be measured to detect the fertility interval in the menstrual cycle of a woman.

Computer assisted analysis of medical x-ray images

NASA Astrophysics Data System (ADS)

Bengtsson, Ewert

1996-01-01

X-rays were originally used to expose film. The early computers did not have enough capacity to handle images with useful resolution. The rapid development of computer technology over the last few decades has, however, led to the introduction of computers into radiology. In this overview paper, the various possible roles of computers in radiology are examined. The state of the art is briefly presented, and some predictions about the future are made.

Continuous-variable quantum Gaussian process regression and quantum singular value decomposition of nonsparse low-rank matrices

NASA Astrophysics Data System (ADS)

Das, Siddhartha; Siopsis, George; Weedbrook, Christian

2018-02-01

With the significant advancement in quantum computation during the past couple of decades, the exploration of machine-learning subroutines using quantum strategies has become increasingly popular. Gaussian process regression is a widely used technique in supervised classical machine learning. Here we introduce an algorithm for Gaussian process regression using continuous-variable quantum systems that can be realized with technology based on photonic quantum computers under certain assumptions regarding distribution of data and availability of efficient quantum access. Our algorithm shows that by using a continuous-variable quantum computer a dramatic speedup in computing Gaussian process regression can be achieved, i.e., the possibility of exponentially reducing the time to compute. Furthermore, our results also include a continuous-variable quantum-assisted singular value decomposition method of nonsparse low rank matrices and forms an important subroutine in our Gaussian process regression algorithm.

Automatic Generation of OpenMP Directives and Its Application to Computational Fluid Dynamics Codes

NASA Technical Reports Server (NTRS)

Yan, Jerry; Jin, Haoqiang; Frumkin, Michael; Yan, Jerry (Technical Monitor)

2000-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. As great progress was made in hardware and software technologies, performance of parallel programs with compiler directives has demonstrated large improvement. The introduction of OpenMP directives, the industrial standard for shared-memory programming, has minimized the issue of portability. In this study, we have extended CAPTools, a computer-aided parallelization toolkit, to automatically generate OpenMP-based parallel programs with nominal user assistance. We outline techniques used in the implementation of the tool and discuss the application of this tool on the NAS Parallel Benchmarks and several computational fluid dynamics codes. This work demonstrates the great potential of using the tool to quickly port parallel programs and also achieve good performance that exceeds some of the commercial tools.

[Neurophysiological Foundations and Practical Realizations of the Brain-Machine Interfaces the Technology in Neurological Rehabilitation].

PubMed

Kaplan, A Ya

2016-01-01

Technology brain-computer interface (BCI) based on the registration and interpretation of EEG has recently become one of the most popular developments in neuroscience and psychophysiology. This is due not only to the intended future use of these technologies in many areas of practical human activity, but also to the fact that IMC--is a completely new paradigm in psychophysiology, allowing test hypotheses about the possibilities of the human brain to the development of skills of interaction with the outside world without the mediation of the motor system, i.e. only with the help of voluntary modulation of EEG generators. This paper examines the theoretical and experimental basis, the current state and prospects of development of training, communicational and assisting complexes based on BCI to control them without muscular effort on the basis of mental commands detected in the EEG of patients with severely impaired speech and motor system.

Color in Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Steinberg, Esther R.

Color monitors are in wide use in computer systems. Thus, it is important to understand how to apply color effectively in computer assisted instruction (CAI) and computer based training (CBT). Color can enhance learning, but it does not automatically do so. Indiscriminate application of color can mislead a student and thereby even interfere with…

Medical informatics--an Australian perspective.

PubMed

Hannan, T

1991-06-01

Computers, like the X-ray and stethoscope can be seen as clinical tools, that provide physicians with improved expertise in solving patient management problems. As tools they enable us to extend our clinical information base, and they also provide facilities that improve the delivery of the health care we provide. Automation (computerisation) in the health domain will cause the computer to become a more integral part of health care management and delivery before the start of the next century. To understand how the computer assists those who deliver and manage health care, it is important to be aware of its functional capabilities and how we can use them in medical practice. The rapid technological advances in computers over the last two decades has had both beneficial and counterproductive effects on the implementation of effective computer applications in the delivery of health care. For example, in the 1990s the computer hobbyist is able to make an investment of less than $10,000 on computer hardware that will match or exceed the technological capacities of machines of the 1960s. These rapid technological advances, which have produced a quantum leap in our ability to store and process information, have tended to make us overlook the need for effective computer programmes which will meet the needs of patient care. As the 1990s begin, those delivering health care (eg, physicians, nurses, pharmacists, administrators ...) need to become more involved in directing the effective implementation of computer applications that will provide the tools for improved information management, knowledge processing, and ultimately better patient care.

Methods for Prediction of High-Speed Reacting Flows in Aerospace Propulsion

NASA Technical Reports Server (NTRS)

Drummond, J. Philip

2014-01-01

Research to develop high-speed airbreathing aerospace propulsion systems was underway in the late 1950s. A major part of the effort involved the supersonic combustion ramjet, or scramjet, engine. Work had also begun to develop computational techniques for solving the equations governing the flow through a scramjet engine. However, scramjet technology and the computational methods to assist in its evolution would remain apart for another decade. The principal barrier was that the computational methods needed for engine evolution lacked the computer technology required for solving the discrete equations resulting from the numerical methods. Even today, computer resources remain a major pacing item in overcoming this barrier. Significant advances have been made over the past 35 years, however, in modeling the supersonic chemically reacting flow in a scramjet combustor. To see how scramjet development and the required computational tools finally merged, we briefly trace the evolution of the technology in both areas.

Cone beam computed tomography in dentistry: what dental educators and learners should know.

PubMed

Adibi, Shawn; Zhang, Wenjian; Servos, Tom; O'Neill, Paula N

2012-11-01

Recent advances in cone beam computed tomography (CBCT) in dentistry have identified the importance of providing outcomes related to the appropriate use of this innovative technology to practitioners, educators, and investigators. To assist in determining whether and what types of evidence exist, the authors conducted PubMed, Google, and Cochrane Library searches in the spring of 2011 using the key words "cone beam computed tomography and dentistry." This search resulted in over 26,900 entries in more than 700 articles including forty-one reviews recently published in national and international journals. This article is based on existing publications and studies and will provide readers with an overview of the advantages, disadvantages, and indications/contraindications of this emerging technology as well as some thoughts on the current educational status of CBCT in U.S. dental schools. It is the responsibility of dental educators to incorporate the most updated information on this technology into their curricula in a timely manner, so that the next generation of oral health providers and educators will be competent in utilizing this technology for the best interest of patients. To do so, there is a need to conduct studies meeting methodological standards to demonstrate the diagnostic efficacy of CBCT in the dental field.

ICCE/ICCAI 2000 Full & Short Papers (Lifelong Learning).

ERIC Educational Resources Information Center

2000

This document contains the following full and short papers on lifelong learning from ICCE/ICCAI 2000 (International Conference on Computers in Education/International Conference on Computer-Assisted Instruction): (1) "A Study on the School Information Technology Pilot Scheme: Possibilities of Creative and Lifelong Learning" (Siu-Cheung Kong,…

Command History for 1990

DTIC Science & Technology

1991-05-01

Marine Corps Tiaining Systems (CBESS) memorization training Inteligence Center, Dam Neck Threat memorization training Commander Tactical Wings, Atlantic...News Shipbuilding Technical training AEGIS Training Center, Dare Artificial Intelligence (Al) Tools Computerized firm-end analysis tools NETSCPAC...Technology Department and provides computational and electronic mail support for research in areas of artificial intelligence, computer-assisted instruction