Sample records for computing center tracc

  1. Transportation Research and Analysis Computing Center (TRACC) Year 6 Quarter 4 Progress Report

    DOT National Transportation Integrated Search

    2013-03-01

    Argonne National Laboratory initiated a FY2006-FY2009 multi-year program with the US Department of Transportation (USDOT) on October 1, 2006, to establish the Transportation Research and Analysis Computing Center (TRACC). As part of the TRACC project...

  2. The Trauma Center Organizational Culture Survey: development and conduction.

    PubMed

    Davis, Matthew L; Wehbe-Janek, Hania; Subacius, Haris; Pinto, Ruxandra; Nathens, Avery B

    2015-01-01

    The Trauma Center Organizational Culture Survey (TRACCS) instrument was developed to assess organizational culture of trauma centers enrolled in the American College of Surgeons Trauma Quality Program (ACS TQIP). The objective is to provide evidence on the psychometric properties of the factors of TRACCS and describe the current organizational culture of TQIP-enrolled trauma centers. A cross-sectional study was conducted by surveying a sampling of employees at 174 TQIP-enrolled trauma centers. Data collection was preceded by multistep survey development. Psychometric properties were assessed by an exploratory factor analysis (construct validity) and the item-total correlations and Cronbach alpha were calculated (internal reliability). Statistical outcomes of the survey responses were measured by descriptive statistics and mixed effect models. The response rate for trauma center participation in the study was 78.7% (n = 137). The factor analysis resulted in 16 items clustered into three factors as described: opportunity, pride, and diversity, trauma center leadership, and employee respect and recognition. TRACCS was found to be highly reliable with a Cronbach alpha of 0.90 in addition to the three factors (0.91, 0.90, and 0.85). Considerable variability of TRACCS overall and factor score among hospitals was measured, with the largest interhospital deviations among trauma center leadership. More than 80% of the variability in the responses occurred within rather than between hospitals. TRACCS was developed as a reliable tool for measuring trauma center organizational culture. Relationships between TQIP outcomes and measured organizational culture are under investigation. Trauma centers could apply TRACCS to better understand current organizational culture and how change tools can impact culture and subsequent patient and process outcomes. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. TRACC_PB SOSS Integrated Traffic Simulation for CLT Ramp Operation

    NASA Technical Reports Server (NTRS)

    Okuniek, Nikolai; Zhu, Zhifan

    2017-01-01

    This presentation provides the current task under the NASA-DLR research collaboration for airport surface. It presents the effort done to adapt TRACC and SOSS software components to simulate airport (CLT) ramp area traffic management using TRACC's conflict free taxi trajectory optimization and SOSS's fast time simulation platform.

  4. How accurate are medical oncologists' impressions of management of metastatic colorectal cancer in Australia?

    PubMed

    Au, Lewis; Turner, Natalie; Wong, Hui-Li; Field, Kathryn; Lee, Belinda; Boadle, David; Cooray, Prasad; Karikios, Deme; Kosmider, Suzanne; Lipton, Lara; Nott, Louise; Parente, Phillip; Tie, Jeanne; Tran, Ben; Wong, Rachel; Yip, Desmond; Shapiro, Jeremy; Gibbs, Peter

    2018-04-01

    Current efforts to understand patient management in clinical practice are largely based on clinician surveys with uncertain reliability. The TRACC (Treatment of Recurrent and Advanced Colorectal Cancer) database is a multisite registry collecting comprehensive treatment and outcome data on consecutive metastatic colorectal cancer (mCRC) patients at multiple sites across Australia. This study aims to determine the accuracy of oncologists' impressions of real-word practice by comparing clinicians' estimates to data captured by TRACC. Nineteen medical oncologists from nine hospitals contributing data to TRACC completed a 34-question survey regarding their impression of the management and outcomes of mCRC at their own practice and other hospitals contributing to the database. Responses were then compared with TRACC data to determine how closely their impressions reflected actual practice. Data on 1300 patients with mCRC were available. Median clinician estimated frequency of KRAS testing within 6 months of diagnosis was 80% (range: 20-100%); the TRACC documented rate was 43%. Clinicians generally overestimated the rates of first-line treatment, particularly in patients over 75 years. Estimate for bevacizumab in first line was 60% (35-80%) versus 49% in TRACC. Estimated rate for liver resection varied substantially (5-35%), and the estimated median (27%) was inconsistent with the TRACC rate (12%). Oncologists generally felt their practice was similar to other hospitals. Oncologists' estimates of current clinical practice varied and were discordant with the TRACC database, often with a tendency to overestimate interventions. Clinician surveys alone do not reliably capture contemporary clinical practices in mCRC. © 2017 John Wiley & Sons Australia, Ltd.

  5. TRACC: an open source software for processing sap flux data from thermal dissipation probes

    Treesearch

    Eric J. Ward; Jean-Christophe Domec; John King; Ge Sun; Steve McNulty; Asko Noormets

    2017-01-01

    Key message TRACC is an open-source software for standardizing the cleaning, conversion, and calibration of sap flux density data from thermal dissipation probes, which addresses issues of nighttime transpiration and water storage. Abstract Thermal dissipation probes (TDPs) have become a widely used method of monitoring plant water use in recent years. The use of TDPs...

  6. Air Flow Modeling in the Wind Tunnel of the FHWA Aerodynamics Laboratory at Turner-Fairbank Highway Research Center

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sitek, M. A.; Lottes, S. A.; Bojanowski, C.

    Computational fluid dynamics (CFD) modeling is widely used in industry for design and in the research community to support, compliment, and extend the scope of experimental studies. Analysis of transportation infrastructure using high performance cluster computing with CFD and structural mechanics software is done at the Transportation Research and Analysis Computing Center (TRACC) at Argonne National Laboratory. These resources, available at TRACC, were used to perform advanced three-dimensional computational simulations of the wind tunnel laboratory at the Turner-Fairbank Highway Research Center (TFHRC). The goals were to verify the CFD model of the laboratory wind tunnel and then to use versionsmore » of the model to provide the capability to (1) perform larger parametric series of tests than can be easily done in the laboratory with available budget and time, (2) to extend testing to wind speeds that cannot be achieved in the laboratory, and (3) to run types of tests that are very difficult or impossible to run in the laboratory. Modern CFD software has many physics models and domain meshing options. Models, including the choice of turbulence and other physics models and settings, the computational mesh, and the solver settings, need to be validated against measurements to verify that the results are sufficiently accurate for use in engineering applications. The wind tunnel model was built and tested, by comparing to experimental measurements, to provide a valuable tool to perform these types of studies in the future as a complement and extension to TFHRC’s experimental capabilities. Wind tunnel testing at TFHRC is conducted in a subsonic open-jet wind tunnel with a 1.83 m (6 foot) by 1.83 m (6 foot) cross section. A three component dual force-balance system is used to measure forces acting on tested models, and a three degree of freedom suspension system is used for dynamic response tests. Pictures of the room are shown in Figure 1-1 to Figure 1-4. A detailed CAD geometry and CFD model of the wind tunnel laboratory at TFHRC was built and tested. Results were compared against experimental wind velocity measurements at a large number of locations around the room. This testing included an assessment of the air flow uniformity provided by the tunnel to the test zone and assessment of room geometry effects, such as influence of the proximity the room walls, the non-symmetrical position of the tunnel in the room, and the influence of the room setup on the air flow in the room. This information is useful both for simplifying the computational model and in deciding whether or not moving, or removing, some of the furniture or other movable objects in the room will change the flow in the test zone.« less

  7. TRACC: An open source software for processing sap flux data from thermal dissipation probes

    DOE PAGES

    Ward, Eric J.; Domec, Jean-Christophe; King, John; ...

    2017-05-02

    Here, thermal dissipation probes (TDPs) have become a widely used method of monitoring plant water use in recent years. The use of TDPs requires calibration to a theoretical zero-flow value (ΔT0); usually based upon the assumption that at least some nighttime measurements represent zero-flow conditions. Fully automating the processing of data from TDPs is made exceedingly difficult due to errors arising from many sources. However, it is desirable to minimize variation arising from different researchers’ processing data, and thus, a common platform for processing data, including editing raw data and determination of ΔT0, is useful and increases the transparency andmore » replicability of TDP-based research. Here, we present the TDP data processing software TRACC (Thermal dissipation Review Assessment Cleaning and Conversion) to serve this purpose. TRACC is an open-source software written in the language R, using graphical presentation of data and on screen prompts with yes/no or simple numerical responses. It allows the user to select several important options, such as calibration coefficients and the exclusion of nights when vapor pressure deficit does not approach zero. Although it is designed for users with no coding experience, the outputs of TRACC could be easily incorporated into more complex models or software.« less

  8. TRACC: An open source software for processing sap flux data from thermal dissipation probes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ward, Eric J.; Domec, Jean-Christophe; King, John

    Here, thermal dissipation probes (TDPs) have become a widely used method of monitoring plant water use in recent years. The use of TDPs requires calibration to a theoretical zero-flow value (ΔT0); usually based upon the assumption that at least some nighttime measurements represent zero-flow conditions. Fully automating the processing of data from TDPs is made exceedingly difficult due to errors arising from many sources. However, it is desirable to minimize variation arising from different researchers’ processing data, and thus, a common platform for processing data, including editing raw data and determination of ΔT0, is useful and increases the transparency andmore » replicability of TDP-based research. Here, we present the TDP data processing software TRACC (Thermal dissipation Review Assessment Cleaning and Conversion) to serve this purpose. TRACC is an open-source software written in the language R, using graphical presentation of data and on screen prompts with yes/no or simple numerical responses. It allows the user to select several important options, such as calibration coefficients and the exclusion of nights when vapor pressure deficit does not approach zero. Although it is designed for users with no coding experience, the outputs of TRACC could be easily incorporated into more complex models or software.« less

  9. Computational mechanics research and support for aerodynamics and hydraulics at TFHRC, year 2 quarter 1 progress report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lottes, S.A.; Bojanowski, C.; Shen, J.

    2012-04-09

    The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water effects on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to improve design allowing for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, CFD analysis of the operation of the wind tunnel in the TFHRC wind engineering laboratory. This quarterly report documents technical progress on the project tasks for the period of October through December 2011.« less

  10. Computational mechanics research and support for aerodynamics and hydraulics at TFHRC, year 2 quarter 2 progress report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lottes, S.A.; Bojanowski, C.; Shen, J.

    2012-06-28

    The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water effects on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to improve design allowing for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, CFD analysis of the operation of the wind tunnel in the TFHRC wind engineering laboratory. This quarterly report documents technical progress on the project tasks for the period of January through March 2012.« less

  11. Computational mechanics research and support for aerodynamics and hydraulics at TFHRC, year 1 quarter 3 progress report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lottes, S.A.; Kulak, R.F.; Bojanowski, C.

    2011-08-26

    The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water loads on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to assess them for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, vehicle stability under high wind loading, and the use of electromagnetic shock absorbers to improve vehicle stability under high wind conditions. This quarterly report documents technical progress on the project tasks for the period of April through June 2011.« less

  12. Computational mechanics research and support for aerodynamics and hydraulics at TFHRC year 1 quarter 4 progress report.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lottes, S.A.; Kulak, R.F.; Bojanowski, C.

    2011-12-09

    The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water effects on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to assess them for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, CFD analysis of the operation of the wind tunnel in the TFCHR wind engineering laboratory, vehicle stability under high wind loading, and the use of electromagnetic shock absorbers to improve vehicle stability under high wind conditions. This quarterly report documents technical progress on the project tasks for the period of July through September 2011.« less

  13. Performance Evaluation of the Approaches and Algorithms Using Hamburg Airport Operations

    NASA Technical Reports Server (NTRS)

    Zhu, Zhifan; Okuniek, Nikolai; Gerdes, Ingrid; Schier, Sebastian; Lee, Hanbong; Jung, Yoon

    2016-01-01

    The German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA) have been independently developing and testing their own concepts and tools for airport surface traffic management. Although these concepts and tools have been tested individually for European and US airports, they have never been compared or analyzed side-by-side. This paper presents the collaborative research devoted to the evaluation and analysis of two different surface management concepts. Hamburg Airport was used as a common test bed airport for the study. First, two independent simulations using the same traffic scenario were conducted; one by the DLR team using the Controller Assistance for Departure Optimization (CADEO) and the Taxi Routing for Aircraft: Creation and Controlling (TRACC) in a real-time simulation environment, and one by the NASA team based on the Spot and Runway Departure Advisor (SARDA) in a fast-time simulation environment. A set of common performance metrics was defined. The simulation results showed that both approaches produced operational benefits in efficiency, such as reducing taxi times, while maintaining runway throughput. Both approaches generated the gate pushback schedule to meet the runway schedule, such that the runway utilization was maximized. The conflict-free taxi guidance by TRACC helped avoid taxi conflicts and reduced taxiing stops, but the taxi benefit needed be assessed together with runway throughput to analyze the overall performance objective.

  14. Performance Evaluation of the Approaches and Algorithms for Hamburg Airport Operations

    NASA Technical Reports Server (NTRS)

    Zhu, Zhifan; Okuniek, Nikolai; Gerdes, Ingrid; Schier, Sebastian; Lee, Hanbong; Jung, Yoon

    2016-01-01

    The German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA) have been independently developing and testing their own concepts and tools for airport surface traffic management. Although these concepts and tools have been tested individually for European and US airports, they have never been compared or analyzed side-by-side. This paper presents the collaborative research devoted to the evaluation and analysis of two different surface management concepts. Hamburg Airport was used as a common test bed airport for the study. First, two independent simulations using the same traffic scenario were conducted: one by the DLR team using the Controller Assistance for Departure Optimization (CADEO) and the Taxi Routing for Aircraft: Creation and Controlling (TRACC) in a real-time simulation environment, and one by the NASA team based on the Spot and Runway Departure Advisor (SARDA) in a fast-time simulation environment. A set of common performance metrics was defined. The simulation results showed that both approaches produced operational benefits in efficiency, such as reducing taxi times, while maintaining runway throughput. Both approaches generated the gate pushback schedule to meet the runway schedule, such that the runway utilization was maximized. The conflict-free taxi guidance by TRACC helped avoid taxi conflicts and reduced taxiing stops, but the taxi benefit needed be assessed together with runway throughput to analyze the overall performance objective.

  15. Performance Evaluation of the Approaches and Algorithms using Hamburg Airport Operations

    NASA Technical Reports Server (NTRS)

    Zhu, Zhifan; Lee, Hanbong; Jung, Yoon; Okuniek, Nikolai; Gerdes, Ingrid; Schier, Sebastian

    2016-01-01

    The German Aerospace Center (DLR) and the National Aeronautics and Space Administration (NASA) have been independently developing and testing their own concepts and tools for airport surface traffic management. Although these concepts and tools have been tested individually for European and US airports, they have never been compared or analyzed side-by-side. This paper presents the collaborative research devoted to the evaluation and analysis of two different surface management concepts. Hamburg Airport was used as a common test bed airport for the study. First, two independent simulations using the same traffic scenario were conducted: one by the DLR team using the Controller Assistance for Departure Optimization (CADEO) and the Taxi Routing for Aircraft58; Creation and Controlling (TRACC) in a real-time simulation environment, and one by the NASA team based on the Spot and Runway Departure Advisor (SARDA) in a fast-time simulation environment. A set of common performance metrics was defined. The simulation results showed that both approaches produced operational benefits in efficiency, such as reducing taxi times, while maintaining runway throughput. Both approaches generated the gate pushback schedule to meet the runway schedule, such that the runway utilization was maximized. The conflict-free taxi guidance by TRACC helped avoid taxi conflicts and reduced taxiing stops, but the taxi benefit needed be assessed together with runway throughput to analyze the overall performance objective.

  16. Novel quality indicators for metastatic colorectal cancer management identify significant variations in these measures across treatment centers in Australia.

    PubMed

    Turner, Natalie Heather; Wong, Hui-Li; Field, Kathryn; Wong, Rachel; Shapiro, Jeremy; Yip, Desmond; Nott, Louise; Tie, Jeanne; Kosmider, Suzanne; Tran, Ben; Desai, Jayesh; McKendrick, Joseph; Zimet, Allan; Richardson, Gary; Iddawela, Mahesh; Gibbs, Peter

    2015-09-01

    Defining multidisciplinary quality of care indicators (QCIs) for metastatic colorectal cancer (mCRC) could improve understanding of variations in routine practice care. This may identify areas of below-average performance, which could then be addressed by clinicians to improve the quality of care delivered. This study aimed to define a panel of QCIs in mCRC and, based on these QCIs, to evaluate quality of care across multiple Australian sites. A panel of clinicians with expertise in colorectal cancer defined evidence-based or best practice-based QCIs relevant to the routine multidisciplinary management of mCRC patients through structured consensus discussion. Related data were extracted from the Treatment of Recurrent and Advanced Colorectal Cancer (TRACC) registry, a prospectively maintained database recording comprehensive details on consecutive mCRC patients across multiple Australian hospitals. Variations in QCIs across sites were explored. Of 13 QCIs defined, data related to 10 were reliably extracted from TRACC. Analysis of data on 1276 patients across 10 sites demonstrated low rates of screening for hereditary nonpolyposis colorectal cancer in young patients and significant variation in surveillance-detected recurrences, lung resection rates and palliative chemotherapy use. Exploratory analyses suggested correlation between liver resection rates and survival. We have defined a novel set of mCRC QCIs and have demonstrated wide variation in the quality of care of mCRC across multiple Australian sites. With further validation to confirm a direct correlation between QCI and patient outcomes, these QCIs could be applied to improve the quality of care received by all mCRC patients. © 2015 Wiley Publishing Asia Pty Ltd.

  17. Performance Evaluation of the Approaches and Algorithms for Hamburg Airport Operations

    NASA Technical Reports Server (NTRS)

    Zhu, Zhifan; Jung, Yoon; Lee, Hanbong; Schier, Sebastian; Okuniek, Nikolai; Gerdes, Ingrid

    2016-01-01

    In this work, fast-time simulations have been conducted using SARDA tools at Hamburg airport by NASA and real-time simulations using CADEO and TRACC with the NLR ATM Research Simulator (NARSIM) by DLR. The outputs are analyzed using a set of common metrics collaborated between DLR and NASA. The proposed metrics are derived from International Civil Aviation Organization (ICAO)s Key Performance Areas (KPAs) in capability, efficiency, predictability and environment, and adapted to simulation studies. The results are examined to explore and compare the merits and shortcomings of the two approaches using the common performance metrics. Particular attention is paid to the concept of the close-loop, trajectory-based taxi as well as the application of US concept to the European airport. Both teams consider the trajectory-based surface operation concept a critical technology advance in not only addressing the current surface traffic management problems, but also having potential application in unmanned vehicle maneuver on airport surface, such as autonomous towing or TaxiBot [6][7] and even Remote Piloted Aircraft (RPA). Based on this work, a future integration of TRACC and SOSS is described aiming at bringing conflict-free trajectory-based operation concept to US airport.

  18. Male and female WorldSID and post mortem human subject responses in full-scale vehicle tests.

    PubMed

    Yoganandan, Narayan; Humm, John; Pintar, Frank; Rhule, Heather; Moorhouse, Kevin; Suntay, Brian; Stricklin, Jim; Rudd, Rodney; Craig, Matthew

    2017-05-29

    This study compares the responses of male and female WorldSID dummies with post mortem human subject (PMHS) responses in full-scale vehicle tests. Tests were conducted according to the FMVSS-214 protocols and using the U.S. Side Impact New Car Assessment Program change in velocity to match PMHS experiments, published earlier. Moving deformable barrier (MDB) tests were conducted with the male and female surrogates in the left front and left rear seats. Pole tests were performed with the male surrogate in the left front seat. Three-point belt restraints were used. Sedan-type vehicles were used from the same manufacturer with side airbags. The PMHS head was instrumented with a pyramid-shaped nine-axis accelerometer package, with angular velocity transducers on the head. Accelerometers and angular velocity transducers were secured to T1, T6, and T12 spinous processes and sacrum. Three chest bands were secured around the upper, middle, and lower thoraces. Dummy instrumentation included five infrared telescoping rods for assessment of chest compression (IR-TRACC) and a chest band at the first abdomen rib, head angular velocity transducer, and head, T1, T4, T12, and pelvis accelerometers. Morphological responses of the kinematics of the head, thoracic spine, and pelvis matched in both surrogates for each pair. The peak magnitudes of the torso accelerations were lower for the dummy than for the biological surrogate. The brain rotational injury criterion (BrIC) response was the highest in the male dummy for the MDB test and PMHS. The probability of AIS3+ injuries, based on the head injury criterion, ranged from 3% to 13% for the PMHS and from 3% to 21% for the dummy from all tests. The BrIC-based metrics ranged from 0 to 21% for the biological and 0 to 48% for the dummy surrogates. The deflection profiles from the IR-TRACC sensors were unimodal. The maximum deflections from the chest band placed on the first abdominal rib were 31.7 mm and 25.4 mm for the male and female dummies in the MDB test, and 37.4 mm for the male dummy in the pole test. The maximum deflections computed from the chest band contours at a gauge equivalent to the IR-TRACC location were 25.9 mm and 14.8 mm for the male and female dummies in the MDB test, and 37.4 mm for the male dummy in the pole test. Other data (static vehicle deformation profiles, accelerations histories of different body regions, and chest band contours for the dummy and PMHS) are given in the appendix. This is the first study to compare the responses of PMHS and male and female dummies in MDB and pole tests, done using the same recent model year vehicles with side airbag and head curtain restraints. The differences between the dummy and PMHS torso accelerations suggest the need for design improvements in the WorldSID dummy. The translation-based metrics suggest low probability of head injury. As the dummy internal sensor underrecorded the peak deflection, multipoint displacement measures are therefore needed for a more accurate quantification of deflection to improve the safety assessment of occupants.

  19. Assessment of Bilateral Thoracic Loading on the Near-Side Occupant Due to Occupant-to-Occupant Interaction in Vehicle Crash Tests.

    PubMed

    Sunnevång, Cecilia; Pipkorn, Bengt; Boström, Ola

    2015-01-01

    This study aims, by means of the WorldSID 50th percentile male, to evaluate thoracic loading and injury risk to the near-side occupant due to occupant-to-occupant interaction in combination with loading from an intruding structure. Nine vehicle crash tests were performed with a 50th percentile WorldSID male dummy in the near-side (adjacent to the intruding structure) seat and a THOR or ES2 dummy in the far-side (opposite the intruding structure) seat. The near-side seated WorldSID was equipped with 6 + 6 IR-Traccs (LH and RH) in the thorax/abdomen enabling measurement of bilateral deflection. To differentiate deflection caused by the intrusion, and the deflection caused by the neighboring occupant, time history curves were analyzed. The crash tests were performed with different modern vehicles, equipped with thorax side airbags and inflatable curtains, ranging from a compact car to a large sedan, and in different loading conditions such as car-to-car, barrier, and pole tests. Lateral delta V based on vehicle tunnel acceleration and maximum residual intrusion at occupant position were used as a measurement of crash severity to compare injury measurements. In the 9 vehicle crash tests, thoracic loading, induced by the intruding structure as well as from the far-side occupant, varied due to the size and structural performance of the car as well as the severity of the crash. Peak deflection on the thoracic outboard side occurred during the first 50 ms of the event. Between 70 to 150 ms loading induced by the neighboring occupant occurred and resulted in an inboard-side peak deflection and viscous criterion. In the tests where the target vehicle lateral delta V was below 30 km/h and intrusion less than 200 mm, deflections were low on both the outboard (20-40 mm) and inboard side (10-15 mm). At higher crash severities, delta V 35 km/h and above as well as intrusions larger than 350 mm, the inboard deflections (caused by interaction to the far-side occupant) were of the same magnitude or even higher (30-70 mm) than the outboard deflections (30-50 mm). A WorldSID 50th percentile male equipped with bilateral IR-Traccs can detect loading to the thorax from a neighboring occupant making injury risk assessment feasible for this type of loading. At crash severities resulting in a delta V above 35 km/h and intrusions larger than 350 mm, both the inboard deflection and VC resulted in high risks of Abbreviated Injury Scale (AIS) 3+ injury, especially for a senior occupant.

  20. High-Performance Computing Data Center | Energy Systems Integration

    Science.gov Websites

    Facility | NREL High-Performance Computing Data Center High-Performance Computing Data Center The Energy Systems Integration Facility's High-Performance Computing Data Center is home to Peregrine -the largest high-performance computing system in the world exclusively dedicated to advancing

  1. Berkeley Lab - Materials Sciences Division

    Science.gov Websites

    Computational Study of Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion and Materials Physics Scattering and Instrumentation Science Centers Center for Computational Study of Sciences Centers Center for Computational Study of Excited-State Phenomena in Energy Materials Center for X

  2. High-Performance Computing Data Center Warm-Water Liquid Cooling |

    Science.gov Websites

    Computational Science | NREL Warm-Water Liquid Cooling High-Performance Computing Data Center Warm-Water Liquid Cooling NREL's High-Performance Computing Data Center (HPC Data Center) is liquid water Liquid cooling technologies offer a more energy-efficient solution that also allows for effective

  3. Laboratory Computing Resource Center

    Science.gov Websites

    Systems Computing and Data Resources Purchasing Resources Future Plans For Users Getting Started Using LCRC Software Best Practices and Policies Getting Help Support Laboratory Computing Resource Center Laboratory Computing Resource Center Latest Announcements See All April 27, 2018, Announcements, John Low

  4. The Development of University Computing in Sweden 1965-1985

    NASA Astrophysics Data System (ADS)

    Dahlstrand, Ingemar

    In 1965-70 the government agency, Statskontoret, set up five university computing centers, as service bureaux financed by grants earmarked for computer use. The centers were well equipped and staffed and caused a surge in computer use. When the yearly flow of grant money stagnated at 25 million Swedish crowns, the centers had to find external income to survive and acquire time-sharing. But the charging system led to the computers not being fully used. The computer scientists lacked equipment for laboratory use. The centers were decentralized and the earmarking abolished. Eventually they got new tasks like running computers owned by the departments, and serving the university administration.

  5. Using 3D infrared imaging to calibrate and refine computational fluid dynamic modeling for large computer and data centers

    NASA Astrophysics Data System (ADS)

    Stockton, Gregory R.

    2011-05-01

    Over the last 10 years, very large government, military, and commercial computer and data center operators have spent millions of dollars trying to optimally cool data centers as each rack has begun to consume as much as 10 times more power than just a few years ago. In fact, the maximum amount of data computation in a computer center is becoming limited by the amount of available power, space and cooling capacity at some data centers. Tens of millions of dollars and megawatts of power are being annually spent to keep data centers cool. The cooling and air flows dynamically change away from any predicted 3-D computational fluid dynamic modeling during construction and as time goes by, and the efficiency and effectiveness of the actual cooling rapidly departs even farther from predicted models. By using 3-D infrared (IR) thermal mapping and other techniques to calibrate and refine the computational fluid dynamic modeling and make appropriate corrections and repairs, the required power for data centers can be dramatically reduced which reduces costs and also improves reliability.

  6. Computers in aeronautics and space research at the Lewis Research Center

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This brochure presents a general discussion of the role of computers in aerospace research at NASA's Lewis Research Center (LeRC). Four particular areas of computer applications are addressed: computer modeling and simulation, computer assisted engineering, data acquisition and analysis, and computer controlled testing.

  7. User-Centered Computer Aided Language Learning

    ERIC Educational Resources Information Center

    Zaphiris, Panayiotis, Ed.; Zacharia, Giorgos, Ed.

    2006-01-01

    In the field of computer aided language learning (CALL), there is a need for emphasizing the importance of the user. "User-Centered Computer Aided Language Learning" presents methodologies, strategies, and design approaches for building interfaces for a user-centered CALL environment, creating a deeper understanding of the opportunities and…

  8. CFD Modeling Activities at the NASA Stennis Space Center

    NASA Technical Reports Server (NTRS)

    Allgood, Daniel

    2007-01-01

    A viewgraph presentation on NASA Stennis Space Center's Computational Fluid Dynamics (CFD) Modeling activities is shown. The topics include: 1) Overview of NASA Stennis Space Center; 2) Role of Computational Modeling at NASA-SSC; 3) Computational Modeling Tools and Resources; and 4) CFD Modeling Applications.

  9. Mathematics and Computer Science | Argonne National Laboratory

    Science.gov Websites

    Genomics and Systems Biology LCRCLaboratory Computing Resource Center MCSGMidwest Center for Structural Genomics NAISENorthwestern-Argonne Institute of Science & Engineering SBCStructural Biology Center

  10. Computer Center Harris 1600 Operator’s Guide.

    DTIC Science & Technology

    1982-06-01

    RECIPIENT’S CATALOG NUMBER CMLD-82-15 Vb /9 7 ’ 4. TITLE (and Subtitle) S. TYPE OF REPORT & PERIOD COVERED Computer Center Harris 1600 Operator’s Guide...AD-AIAA 077 DAVID W TAYLOR NAVAL SHIP RESEARCH AND DEVELOPMENT CE--ETC F/G. 5/9 COMPUTER CENTER HARRIS 1600 OPEAATOR’S GUIDE.dU) M JUN 62 D A SOMMER...20084 COMPUTER CENTER HARRIS 1600 OPERATOR’s GUIDE by David V. Sommer & Sharon E. Good APPROVED FOR PUBLIC RELEASE: DISTRIBUTION UNLIMITED ’-.7 SJ0 o 0

  11. 77 FR 34941 - Privacy Act of 1974; Notice of a Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-12

    ...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, DoD. ACTION: Notice of a... computer matching program are the Department of Veterans Affairs (VA) and the Defense Manpower Data Center... identified as DMDC 01, entitled ``Defense Manpower Data Center Data Base,'' last published in the Federal...

  12. 77 FR 35432 - Privacy Act of 1974, Computer Matching Program: United States Postal Service and the Defense...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-13

    ... the Defense Manpower Data Center, Department of Defense AGENCY: Postal Service TM . ACTION: Notice of Computer Matching Program--United States Postal Service and the Defense Manpower Data Center, Department of... as the recipient agency in a computer matching program with the Defense Manpower Data Center (DMDC...

  13. Data Center Consolidation: A Step towards Infrastructure Clouds

    NASA Astrophysics Data System (ADS)

    Winter, Markus

    Application service providers face enormous challenges and rising costs in managing and operating a growing number of heterogeneous system and computing landscapes. Limitations of traditional computing environments force IT decision-makers to reorganize computing resources within the data center, as continuous growth leads to an inefficient utilization of the underlying hardware infrastructure. This paper discusses a way for infrastructure providers to improve data center operations based on the findings of a case study on resource utilization of very large business applications and presents an outlook beyond server consolidation endeavors, transforming corporate data centers into compute clouds.

  14. Computer Maintenance Operations Center (CMOC), additional computer support equipment ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Computer Maintenance Operations Center (CMOC), additional computer support equipment - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  15. Exploring the Relationships between Self-Efficacy and Preference for Teacher Authority among Computer Science Majors

    ERIC Educational Resources Information Center

    Lin, Che-Li; Liang, Jyh-Chong; Su, Yi-Ching; Tsai, Chin-Chung

    2013-01-01

    Teacher-centered instruction has been widely adopted in college computer science classrooms and has some benefits in training computer science undergraduates. Meanwhile, student-centered contexts have been advocated to promote computer science education. How computer science learners respond to or prefer the two types of teacher authority,…

  16. Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170174 computers ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170-174 computers - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

  17. NASA Center for Computational Sciences: History and Resources

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The Nasa Center for Computational Sciences (NCCS) has been a leading capacity computing facility, providing a production environment and support resources to address the challenges facing the Earth and space sciences research community.

  18. Center for Computing Research Summer Research Proceedings 2015.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bradley, Andrew Michael; Parks, Michael L.

    2015-12-18

    The Center for Computing Research (CCR) at Sandia National Laboratories organizes a summer student program each summer, in coordination with the Computer Science Research Institute (CSRI) and Cyber Engineering Research Institute (CERI).

  19. 78 FR 45513 - Privacy Act of 1974; Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-29

    ...; Computer Matching Program AGENCY: Defense Manpower Data Center (DMDC), DoD. ACTION: Notice of a Computer... individual's privacy, and would result in additional delay in determining eligibility and, if applicable, the... Defense. NOTICE OF A COMPUTER MATCHING PROGRAM AMONG THE DEFENSE MANPOWER DATA CENTER, THE DEPARTMENT OF...

  20. 20. SITE BUILDING 002 SCANNER BUILDING IN COMPUTER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. SITE BUILDING 002 - SCANNER BUILDING - IN COMPUTER ROOM LOOKING AT "CONSOLIDATED MAINTENANCE OPERATIONS CENTER" JOB AREA AND OPERATION WORK CENTER. TASKS INCLUDE RADAR MAINTENANCE, COMPUTER MAINTENANCE, CYBER COMPUTER MAINTENANCE AND RELATED ACTIVITIES. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

  1. Vanderbilt University Institute of Imaging Science Center for Computational Imaging XNAT: A multimodal data archive and processing environment.

    PubMed

    Harrigan, Robert L; Yvernault, Benjamin C; Boyd, Brian D; Damon, Stephen M; Gibney, Kyla David; Conrad, Benjamin N; Phillips, Nicholas S; Rogers, Baxter P; Gao, Yurui; Landman, Bennett A

    2016-01-01

    The Vanderbilt University Institute for Imaging Science (VUIIS) Center for Computational Imaging (CCI) has developed a database built on XNAT housing over a quarter of a million scans. The database provides framework for (1) rapid prototyping, (2) large scale batch processing of images and (3) scalable project management. The system uses the web-based interfaces of XNAT and REDCap to allow for graphical interaction. A python middleware layer, the Distributed Automation for XNAT (DAX) package, distributes computation across the Vanderbilt Advanced Computing Center for Research and Education high performance computing center. All software are made available in open source for use in combining portable batch scripting (PBS) grids and XNAT servers. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Energy 101: Energy Efficient Data Centers

    ScienceCinema

    None

    2018-04-16

    Data centers provide mission-critical computing functions vital to the daily operation of top U.S. economic, scientific, and technological organizations. These data centers consume large amounts of energy to run and maintain their computer systems, servers, and associated high-performance components—up to 3% of all U.S. electricity powers data centers. And as more information comes online, data centers will consume even more energy. Data centers can become more energy efficient by incorporating features like power-saving "stand-by" modes, energy monitoring software, and efficient cooling systems instead of energy-intensive air conditioners. These and other efficiency improvements to data centers can produce significant energy savings, reduce the load on the electric grid, and help protect the nation by increasing the reliability of critical computer operations.

  3. Evolution of the Virtualized HPC Infrastructure of Novosibirsk Scientific Center

    NASA Astrophysics Data System (ADS)

    Adakin, A.; Anisenkov, A.; Belov, S.; Chubarov, D.; Kalyuzhny, V.; Kaplin, V.; Korol, A.; Kuchin, N.; Lomakin, S.; Nikultsev, V.; Skovpen, K.; Sukharev, A.; Zaytsev, A.

    2012-12-01

    Novosibirsk Scientific Center (NSC), also known worldwide as Akademgorodok, is one of the largest Russian scientific centers hosting Novosibirsk State University (NSU) and more than 35 research organizations of the Siberian Branch of Russian Academy of Sciences including Budker Institute of Nuclear Physics (BINP), Institute of Computational Technologies, and Institute of Computational Mathematics and Mathematical Geophysics (ICM&MG). Since each institute has specific requirements on the architecture of computing farms involved in its research field, currently we've got several computing facilities hosted by NSC institutes, each optimized for a particular set of tasks, of which the largest are the NSU Supercomputer Center, Siberian Supercomputer Center (ICM&MG), and a Grid Computing Facility of BINP. A dedicated optical network with the initial bandwidth of 10 Gb/s connecting these three facilities was built in order to make it possible to share the computing resources among the research communities, thus increasing the efficiency of operating the existing computing facilities and offering a common platform for building the computing infrastructure for future scientific projects. Unification of the computing infrastructure is achieved by extensive use of virtualization technology based on XEN and KVM platforms. This contribution gives a thorough review of the present status and future development prospects for the NSC virtualized computing infrastructure and the experience gained while using it for running production data analysis jobs related to HEP experiments being carried out at BINP, especially the KEDR detector experiment at the VEPP-4M electron-positron collider.

  4. An investigation of the effects of touchpad location within a notebook computer.

    PubMed

    Kelaher, D; Nay, T; Lawrence, B; Lamar, S; Sommerich, C M

    2001-02-01

    This study evaluated effects of the location of a notebook computer's integrated touchpad, complimenting previous work in the area of desktop mouse location effects. Most often integrated touchpads are located in the computer's wrist rest, and centered on the keyboard. This study characterized effects of this bottom center location and four alternatives (top center, top right, right side, and bottom right) upon upper extremity posture, discomfort, preference, and performance. Touchpad location was found to significantly impact each of those measures. The top center location was particularly poor, in that it elicited more ulnar deviation, more shoulder flexion, more discomfort, and perceptions of performance impedance. In general, the bottom center, bottom right, and right side locations fared better, though subjects' wrists were more extended in the bottom locations. Suggestions for notebook computer design are provided.

  5. FY 72 Computer Utilization at the Transportation Systems Center

    DOT National Transportation Integrated Search

    1972-08-01

    The Transportation Systems Center currently employs a medley of on-site and off-site computer systems to obtain the computational support it requires. Examination of the monthly User Accountability Reports for FY72 indicated that during the fiscal ye...

  6. Kevin Regimbal | NREL

    Science.gov Websites

    -275-4303 Kevin Regimbal oversees NREL's High Performance Computing (HPC) Systems & Operations , engineering, and operations. Kevin is interested in data center design and computing as well as data center integration and optimization. Professional Experience HPC oversight: program manager, project manager, center

  7. The role of dedicated data computing centers in the age of cloud computing

    NASA Astrophysics Data System (ADS)

    Caramarcu, Costin; Hollowell, Christopher; Strecker-Kellogg, William; Wong, Antonio; Zaytsev, Alexandr

    2017-10-01

    Brookhaven National Laboratory (BNL) anticipates significant growth in scientific programs with large computing and data storage needs in the near future and has recently reorganized support for scientific computing to meet these needs. A key component is the enhanced role of the RHIC-ATLAS Computing Facility (RACF) in support of high-throughput and high-performance computing (HTC and HPC) at BNL. This presentation discusses the evolving role of the RACF at BNL, in light of its growing portfolio of responsibilities and its increasing integration with cloud (academic and for-profit) computing activities. We also discuss BNL’s plan to build a new computing center to support the new responsibilities of the RACF and present a summary of the cost benefit analysis done, including the types of computing activities that benefit most from a local data center vs. cloud computing. This analysis is partly based on an updated cost comparison of Amazon EC2 computing services and the RACF, which was originally conducted in 2012.

  8. CAROLINA CENTER FOR COMPUTATIONAL TOXICOLOGY

    EPA Science Inventory

    The Center will advance the field of computational toxicology through the development of new methods and tools, as well as through collaborative efforts. In each Project, new computer-based models will be developed and published that represent the state-of-the-art. The tools p...

  9. Adaptation of a Control Center Development Environment for Industrial Process Control

    NASA Technical Reports Server (NTRS)

    Killough, Ronnie L.; Malik, James M.

    1994-01-01

    In the control center, raw telemetry data is received for storage, display, and analysis. This raw data must be combined and manipulated in various ways by mathematical computations to facilitate analysis, provide diversified fault detection mechanisms, and enhance display readability. A development tool called the Graphical Computation Builder (GCB) has been implemented which provides flight controllers with the capability to implement computations for use in the control center. The GCB provides a language that contains both general programming constructs and language elements specifically tailored for the control center environment. The GCB concept allows staff who are not skilled in computer programming to author and maintain computer programs. The GCB user is isolated from the details of external subsystem interfaces and has access to high-level functions such as matrix operators, trigonometric functions, and unit conversion macros. The GCB provides a high level of feedback during computation development that improves upon the often cryptic errors produced by computer language compilers. An equivalent need can be identified in the industrial data acquisition and process control domain: that of an integrated graphical development tool tailored to the application to hide the operating system, computer language, and data acquisition interface details. The GCB features a modular design which makes it suitable for technology transfer without significant rework. Control center-specific language elements can be replaced by elements specific to industrial process control.

  10. Cloudbursting - Solving the 3-body problem

    NASA Astrophysics Data System (ADS)

    Chang, G.; Heistand, S.; Vakhnin, A.; Huang, T.; Zimdars, P.; Hua, H.; Hood, R.; Koenig, J.; Mehrotra, P.; Little, M. M.; Law, E.

    2014-12-01

    Many science projects in the future will be accomplished through collaboration among 2 or more NASA centers along with, potentially, external scientists. Science teams will be composed of more geographically dispersed individuals and groups. However, the current computing environment does not make this easy and seamless. By being able to share computing resources among members of a multi-center team working on a science/ engineering project, limited pre-competition funds could be more efficiently applied and technical work could be conducted more effectively with less time spent moving data or waiting for computing resources to free up. Based on the work from an NASA CIO IT Labs task, this presentation will highlight our prototype work in identifying the feasibility and identify the obstacles, both technical and management, to perform "Cloudbursting" among private clouds located at three different centers. We will demonstrate the use of private cloud computing infrastructure at the Jet Propulsion Laboratory, Langley Research Center, and Ames Research Center to provide elastic computation to each other to perform parallel Earth Science data imaging. We leverage elastic load balancing and auto-scaling features at each data center so that each location can independently define how many resources to allocate to a particular job that was "bursted" from another data center and demonstrate that compute capacity scales up and down with the job. We will also discuss future work in the area, which could include the use of cloud infrastructure from different cloud framework providers as well as other cloud service providers.

  11. Computers and Media Centers--A Winning Combination.

    ERIC Educational Resources Information Center

    Graf, Nancy

    1984-01-01

    Profile of the computer program offered by the library/media center at Chief Joseph Junior High School in Richland, Washington, highlights program background, operator's licensing procedure, the trainer license, assistance from high school students, need for more computers, handling of software, and helpful hints. (EJS)

  12. For operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    Carmon, J. L.

    1983-01-01

    During the month of June, the Survey Research Center (SRC) at the University of Georgia designed new benefits questionnaires for computer software management and information center (COSMIC). As a test of their utility, these questionnaires are now used in the benefits identification process.

  13. Reinventing patient-centered computing for the twenty-first century.

    PubMed

    Goldberg, H S; Morales, A; Gottlieb, L; Meador, L; Safran, C

    2001-01-01

    Despite evidence over the past decade that patients like and will use patient-centered computing systems in managing their health, patients have remained forgotten stakeholders in advances in clinical computing systems. We present a framework for patient empowerment and the technical realization of that framework in an architecture called CareLink. In an evaluation of the initial deployment of CareLink in the support of neonatal intensive care, we have demonstrated a reduction in the length of stay for very-low birthweight infants, and an improvement in family satisfaction with care delivery. With the ubiquitous adoption of the Internet into the general culture, patient-centered computing provides the opportunity to mend broken health care relationships and reconnect patients to the care delivery process. CareLink itself provides functionality to support both clinical care and research, and provides a living laboratory for the further study of patient-centered computing.

  14. Joint the Center for Applied Scientific Computing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gamblin, Todd; Bremer, Timo; Van Essen, Brian

    The Center for Applied Scientific Computing serves as Livermore Lab’s window to the broader computer science, computational physics, applied mathematics, and data science research communities. In collaboration with academic, industrial, and other government laboratory partners, we conduct world-class scientific research and development on problems critical to national security. CASC applies the power of high-performance computing and the efficiency of modern computational methods to the realms of stockpile stewardship, cyber and energy security, and knowledge discovery for intelligence applications.

  15. Advanced Biomedical Computing Center (ABCC) | DSITP

    Cancer.gov

    The Advanced Biomedical Computing Center (ABCC), located in Frederick Maryland (MD), provides HPC resources for both NIH/NCI intramural scientists and the extramural biomedical research community. Its mission is to provide HPC support, to provide collaborative research, and to conduct in-house research in various areas of computational biology and biomedical research.

  16. New developments in delivering public access to data from the National Center for Computational Toxicology at the EPA

    EPA Science Inventory

    Researchers at EPA’s National Center for Computational Toxicology integrate advances in biology, chemistry, and computer science to examine the toxicity of chemicals and help prioritize chemicals for further research based on potential human health risks. The goal of this researc...

  17. Community Information Centers and the Computer.

    ERIC Educational Resources Information Center

    Carroll, John M.; Tague, Jean M.

    Two computer data bases have been developed by the Computer Science Department at the University of Western Ontario for "Information London," the local community information center. One system, called LONDON, permits Boolean searches of a file of 5,000 records describing human service agencies in the London area. The second system,…

  18. 78 FR 69926 - Privacy Act of 1974, as Amended; Computer Matching Program (SSA/Centers for Medicare & Medicaid...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-21

    ... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA 2013-0059] Privacy Act of 1974, as Amended; Computer Matching Program (SSA/ Centers for Medicare & Medicaid Services (CMS))--Match Number 1076 AGENCY: Social Security Administration (SSA). ACTION: Notice of a renewal of an existing computer matching...

  19. 76 FR 21091 - Privacy Act of 1974, as Amended; Computer Matching Program (SSA/Centers for Medicare & Medicaid...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA 2011-0022] Privacy Act of 1974, as Amended; Computer Matching Program (SSA/ Centers for Medicare & Medicaid Services (CMS))--Match Number 1076 AGENCY: Social Security Administration (SSA). ACTION: Notice of a renewal of an existing computer matching...

  20. Cornell University Center for Advanced Computing

    Science.gov Websites

    Resource Center Data Management (RDMSG) Computational Agriculture National Science Foundation Other Public agriculture technology acquired Lifka joins National Science Foundation CISE Advisory Committee © Cornell

  1. Digital optical computers at the optoelectronic computing systems center

    NASA Technical Reports Server (NTRS)

    Jordan, Harry F.

    1991-01-01

    The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

  2. Final Report. Center for Scalable Application Development Software

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mellor-Crummey, John

    2014-10-26

    The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee – Knoxville, and University of Wisconsin – Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codesmore » for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.« less

  3. Intention and Usage of Computer Based Information Systems in Primary Health Centers

    ERIC Educational Resources Information Center

    Hosizah; Kuntoro; Basuki N., Hari

    2016-01-01

    The computer-based information system (CBIS) is adopted by almost all of in health care setting, including the primary health center in East Java Province Indonesia. Some of softwares available were SIMPUS, SIMPUSTRONIK, SIKDA Generik, e-puskesmas. Unfortunately they were most of the primary health center did not successfully implemented. This…

  4. Using Frameworks in a Government Contracting Environment: Case Study at the NASA Center for Computational Sciences

    NASA Technical Reports Server (NTRS)

    McGalliard, James

    2008-01-01

    A viewgraph describing the use of multiple frameworks by NASA, GSA, and U.S. Government agencies is presented. The contents include: 1) Federal Systems Integration and Management Center (FEDSIM) and NASA Center for Computational Sciences (NCCS) Environment; 2) Ruling Frameworks; 3) Implications; and 4) Reconciling Multiple Frameworks.

  5. Roy Fraley | NREL

    Science.gov Websites

    Roy Fraley Roy Fraley Professional II-Engineer Roy.Fraley@nrel.gov | 303-384-6468 Roy Fraley is the high-performance computing (HPC) data center engineer with the Computational Science Center's HPC

  6. JobCenter: an open source, cross-platform, and distributed job queue management system optimized for scalability and versatility.

    PubMed

    Jaschob, Daniel; Riffle, Michael

    2012-07-30

    Laboratories engaged in computational biology or bioinformatics frequently need to run lengthy, multistep, and user-driven computational jobs. Each job can tie up a computer for a few minutes to several days, and many laboratories lack the expertise or resources to build and maintain a dedicated computer cluster. JobCenter is a client-server application and framework for job management and distributed job execution. The client and server components are both written in Java and are cross-platform and relatively easy to install. All communication with the server is client-driven, which allows worker nodes to run anywhere (even behind external firewalls or "in the cloud") and provides inherent load balancing. Adding a worker node to the worker pool is as simple as dropping the JobCenter client files onto any computer and performing basic configuration, which provides tremendous ease-of-use, flexibility, and limitless horizontal scalability. Each worker installation may be independently configured, including the types of jobs it is able to run. Executed jobs may be written in any language and may include multistep workflows. JobCenter is a versatile and scalable distributed job management system that allows laboratories to very efficiently distribute all computational work among available resources. JobCenter is freely available at http://code.google.com/p/jobcenter/.

  7. Computers in Schools of Southeast Texas in 1997.

    ERIC Educational Resources Information Center

    Henderson, David L.; Renfrow, Raylene

    This study examined computer use in southeast Texas schools in 1997. The study population included 110 school districts in Education Service Center Regions IV and VI. These centers serve 22 counties of southeast Texas in the Houston area. Using questionnaires, researchers collected data on brands of computers presently in use, percent of computer…

  8. 77 FR 33547 - Privacy Act of 1974, as Amended; Computer Matching Program (SSA/Centers for Medicare and Medicaid...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-06

    ... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA 2012-0015] Privacy Act of 1974, as Amended; Computer Matching Program (SSA/ Centers for Medicare and Medicaid Services (CMS))--Match Number 1094 AGENCY: Social Security Administration (SSA). ACTION: Notice of a new computer matching program that will expire...

  9. The National Special Education Alliance: One Year Later.

    ERIC Educational Resources Information Center

    Green, Peter

    1988-01-01

    The National Special Education Alliance (a national network of local computer resource centers associated with Apple Computer, Inc.) consists, one year after formation, of 24 non-profit support centers staffed largely by volunteers. The NSEA now reaches more than 1000 disabled computer users each month and more growth in the future is expected.…

  10. The Benefits of Making Data from the EPA National Center for Computational Toxicology available for reuse (ACS Fall meeting 3 of 12)

    EPA Science Inventory

    Researchers at EPA’s National Center for Computational Toxicology (NCCT) integrate advances in biology, chemistry, exposure and computer science to help prioritize chemicals for further research based on potential human health risks. The goal of this research is to quickly evalua...

  11. Books, Bytes, and Bridges: Libraries and Computer Centers in Academic Institutions.

    ERIC Educational Resources Information Center

    Hardesty, Larry, Ed.

    This book about the relationship between computer centers and libraries at academic institutions contains the following chapters: (1) "A History of the Rhetoric and Reality of Library and Computing Relationships" (Peggy Seiden and Michael D. Kathman); (2) "An Issue in Search of a Metaphor: Readings on the Marriageability of…

  12. Computational structures technology and UVA Center for CST

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K.

    1992-01-01

    Rapid advances in computer hardware have had a profound effect on various engineering and mechanics disciplines, including the materials, structures, and dynamics disciplines. A new technology, computational structures technology (CST), has recently emerged as an insightful blend between material modeling, structural and dynamic analysis and synthesis on the one hand, and other disciplines such as computer science, numerical analysis, and approximation theory, on the other hand. CST is an outgrowth of finite element methods developed over the last three decades. The focus of this presentation is on some aspects of CST which can impact future airframes and propulsion systems, as well as on the newly established University of Virginia (UVA) Center for CST. The background and goals for CST are described along with the motivations for developing CST, and a brief discussion is made on computational material modeling. We look at the future in terms of technical needs, computing environment, and research directions. The newly established UVA Center for CST is described. One of the research projects of the Center is described, and a brief summary of the presentation is given.

  13. Computer programs: Operational and mathematical, a compilation

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Several computer programs which are available through the NASA Technology Utilization Program are outlined. Presented are: (1) Computer operational programs which can be applied to resolve procedural problems swiftly and accurately. (2) Mathematical applications for the resolution of problems encountered in numerous industries. Although the functions which these programs perform are not new and similar programs are available in many large computer center libraries, this collection may be of use to centers with limited systems libraries and for instructional purposes for new computer operators.

  14. For operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    Carmon, J. L.

    1983-01-01

    Progress report on current status of computer software management and information center (COSMIC) includes the following areas: inventory, evaluation and publication, marketing, customer service, maintenance and support, and budget summary.

  15. Center for Advanced Computational Technology

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K.

    2000-01-01

    The Center for Advanced Computational Technology (ACT) was established to serve as a focal point for diverse research activities pertaining to application of advanced computational technology to future aerospace systems. These activities include the use of numerical simulations, artificial intelligence methods, multimedia and synthetic environments, and computational intelligence, in the modeling, analysis, sensitivity studies, optimization, design and operation of future aerospace systems. The Center is located at NASA Langley and is an integral part of the School of Engineering and Applied Science of the University of Virginia. The Center has four specific objectives: 1) conduct innovative research on applications of advanced computational technology to aerospace systems; 2) act as pathfinder by demonstrating to the research community what can be done (high-potential, high-risk research); 3) help in identifying future directions of research in support of the aeronautical and space missions of the twenty-first century; and 4) help in the rapid transfer of research results to industry and in broadening awareness among researchers and engineers of the state-of-the-art in applications of advanced computational technology to the analysis, design prototyping and operations of aerospace and other high-performance engineering systems. In addition to research, Center activities include helping in the planning and coordination of the activities of a multi-center team of NASA and JPL researchers who are developing an intelligent synthesis environment for future aerospace systems; organizing workshops and national symposia; as well as writing state-of-the-art monographs and NASA special publications on timely topics.

  16. CNC Turning Center Advanced Operations. Computer Numerical Control Operator/Programmer. 444-332.

    ERIC Educational Resources Information Center

    Skowronski, Steven D.; Tatum, Kenneth

    This student guide provides materials for a course designed to introduce the student to the operations and functions of a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 presents course expectations and syllabus, covers safety precautions, and describes the CNC turning center components, CNC…

  17. Information and psychomotor skills knowledge acquisition: A student-customer-centered and computer-supported approach.

    PubMed

    Nicholson, Anita; Tobin, Mary

    2006-01-01

    This presentation will discuss coupling commercial and customized computer-supported teaching aids to provide BSN nursing students with a friendly customer-centered self-study approach to psychomotor skill acquisition.

  18. Computational mechanics and physics at NASA Langley Research Center

    NASA Technical Reports Server (NTRS)

    South, Jerry C., Jr.

    1987-01-01

    An overview is given of computational mechanics and physics at NASA Langley Research Center. Computational analysis is a major component and tool in many of Langley's diverse research disciplines, as well as in the interdisciplinary research. Examples are given for algorithm development and advanced applications in aerodynamics, transition to turbulence and turbulence simulation, hypersonics, structures, and interdisciplinary optimization.

  19. Center for computation and visualization of geometric structures. Final report, 1992 - 1995

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-11-01

    This report describes the overall goals and the accomplishments of the Geometry Center of the University of Minnesota, whose mission is to develop, support, and promote computational tools for visualizing geometric structures, for facilitating communication among mathematical and computer scientists and between these scientists and the public at large, and for stimulating research in geometry.

  20. 76 FR 56744 - Privacy Act of 1974; Notice of a Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-14

    ...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, Department of Defense (DoD... (SSA) and DoD Defense Manpower Data Center (DMDC) that their records are being matched by computer. The... intrusion of the individual's privacy and would result in additional delay in the eventual SSI payment and...

  1. Applied technology center business plan and market survey

    NASA Technical Reports Server (NTRS)

    Hodgin, Robert F.; Marchesini, Roberto

    1990-01-01

    Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

  2. A Queue Simulation Tool for a High Performance Scientific Computing Center

    NASA Technical Reports Server (NTRS)

    Spear, Carrie; McGalliard, James

    2007-01-01

    The NASA Center for Computational Sciences (NCCS) at the Goddard Space Flight Center provides high performance highly parallel processors, mass storage, and supporting infrastructure to a community of computational Earth and space scientists. Long running (days) and highly parallel (hundreds of CPUs) jobs are common in the workload. NCCS management structures batch queues and allocates resources to optimize system use and prioritize workloads. NCCS technical staff use a locally developed discrete event simulation tool to model the impacts of evolving workloads, potential system upgrades, alternative queue structures and resource allocation policies.

  3. Marin Computer Center.

    ERIC Educational Resources Information Center

    Fox, Annie

    1978-01-01

    Relates some experiences at this nonprofit center, which was designed so that interested members of the general public can walk in and learn about computers in a safe, nonintimidating environment. STARWARS HODGE, a game written in PILOT, is also described. (CMV)

  4. 75 FR 65639 - Center for Scientific Review; Notice of Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-26

    ...: Computational Biology Special Emphasis Panel A. Date: October 29, 2010. Time: 2 p.m. to 3:30 p.m. Agenda: To.... Name of Committee: Center for Scientific Review Special Emphasis Panel; Member Conflict: Computational...

  5. The Operation of a Specialized Scientific Information and Data Analysis Center With Computer Base and Associated Communications Network.

    ERIC Educational Resources Information Center

    Cottrell, William B.; And Others

    The Nuclear Safety Information Center (NSIC) is a highly sophisticated scientific information center operated at Oak Ridge National Laboratory (ORNL) for the U.S. Atomic Energy Commission. Its information file, which consists of both data and bibliographic information, is computer stored and numerous programs have been developed to facilitate the…

  6. 78 FR 42080 - Privacy Act of 1974; CMS Computer Match No. 2013-07; HHS Computer Match No. 1303; DoD-DMDC Match...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-15

    ... with the Department of Defense (DoD), Defense Manpower Data Center (DMDC). We have provided background... & Medicaid Services and the Department of Defense, Defense Manpower Data Center for the Determination of...), Centers for Medicare & Medicaid Services (CMS), and Department of Defense (DoD), Defense Manpower Data...

  7. JobCenter: an open source, cross-platform, and distributed job queue management system optimized for scalability and versatility

    PubMed Central

    2012-01-01

    Background Laboratories engaged in computational biology or bioinformatics frequently need to run lengthy, multistep, and user-driven computational jobs. Each job can tie up a computer for a few minutes to several days, and many laboratories lack the expertise or resources to build and maintain a dedicated computer cluster. Results JobCenter is a client–server application and framework for job management and distributed job execution. The client and server components are both written in Java and are cross-platform and relatively easy to install. All communication with the server is client-driven, which allows worker nodes to run anywhere (even behind external firewalls or “in the cloud”) and provides inherent load balancing. Adding a worker node to the worker pool is as simple as dropping the JobCenter client files onto any computer and performing basic configuration, which provides tremendous ease-of-use, flexibility, and limitless horizontal scalability. Each worker installation may be independently configured, including the types of jobs it is able to run. Executed jobs may be written in any language and may include multistep workflows. Conclusions JobCenter is a versatile and scalable distributed job management system that allows laboratories to very efficiently distribute all computational work among available resources. JobCenter is freely available at http://code.google.com/p/jobcenter/. PMID:22846423

  8. Center for Center for Technology for Advanced Scientific Component Software (TASCS)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kostadin, Damevski

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technologymore » for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.« less

  9. Use of computers and Internet among people with severe mental illnesses at peer support centers.

    PubMed

    Brunette, Mary F; Aschbrenner, Kelly A; Ferron, Joelle C; Ustinich, Lee; Kelly, Michael; Grinley, Thomas

    2017-12-01

    Peer support centers are an ideal setting where people with severe mental illnesses can access the Internet via computers for online health education, peer support, and behavioral treatments. The purpose of this study was to assess computer use and Internet access in peer support agencies. A peer-assisted survey assessed the frequency with which consumers in all 13 New Hampshire peer support centers (n = 702) used computers to access Internet resources. During the 30-day survey period, 200 of the 702 peer support consumers (28%) responded to the survey. More than 3 quarters (78.5%) of respondents had gone online to seek information in the past year. About half (49%) of respondents were interested in learning about online forums that would provide information and peer support for mental health issues. Peer support centers may be a useful venue for Web-based approaches to education, peer support, and intervention. Future research should assess facilitators and barriers to use of Web-based resources among people with severe mental illness in peer support centers. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  10. Annual Report of the Metals and Ceramics Information Center, 1 May 1979-30 April 1980.

    DTIC Science & Technology

    1980-07-01

    MANAGEMENT AND ECONOMIC ANALYSIS DEPT. * Computer and Information SyslemsiD. C Operations 1 Battelle Technical Inputs to Planning * Computer Systems 0...Biomass Resources * Education 0 Business Planning * Information Systems * Economics , Planning and Policy Analysis * Statistical and Mathematical Modelrng...Metals and Ceramics Information Center (MCIC) is one of several technical information analysis centers (IAC’s) chartered and sponsored by the

  11. Computer-generated formulas for three-center nuclear-attraction integrals (electrostatic potential) for Slater-type orbitals

    NASA Technical Reports Server (NTRS)

    Jones, H. W.

    1984-01-01

    The computer-assisted C-matrix, Loewdin-alpha-function, single-center expansion method in spherical harmonics has been applied to the three-center nuclear-attraction integral (potential due to the product of separated Slater-type orbitals). Exact formulas are produced for 13 terms of an infinite series that permits evaluation to ten decimal digits of an example using 1s orbitals.

  12. Computer-aided dispatch--traffic management center field operational test final detailed test plan : WSDOT deployment

    DOT National Transportation Integrated Search

    2003-10-01

    The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : WSDOT deployment". This document defines the objective, approach,...

  13. Computer-aided dispatch--traffic management center field operational test : Washington State final report

    DOT National Transportation Integrated Search

    2006-05-01

    This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch - Traffic Management Center Integration Field Operations Test in the State of Washington. The document discusses evaluation findings in the foll...

  14. Argonne Research Library | Argonne National Laboratory

    Science.gov Websites

    Publications Researchers Postdocs Exascale Computing Institute for Molecular Engineering at Argonne Work with Scientific Publications Researchers Postdocs Exascale Computing Institute for Molecular Engineering at IMEInstitute for Molecular Engineering JCESRJoint Center for Energy Storage Research MCSGMidwest Center for

  15. The Effort to Reduce a Muscle Fatigue Through Gymnastics Relaxation and Ergonomic Approach for Computer Users in Central Building State University of Medan

    NASA Astrophysics Data System (ADS)

    Gultom, Syamsul; Darma Sitepu, Indra; Hasibuan, Nurman

    2018-03-01

    Fatigue due to long and continuous computer usage can lead to problems of dominant fatigue associated with decreased performance and work motivation. Specific targets in the first phase have been achieved in this research such as: (1) Identified complaints on workers using computers, using the Bourdon Wiersma test kit. (2) Finding the right relaxation & work posture draft for a solution to reduce muscle fatigue in computer-based workers. The type of research used in this study is research and development method which aims to produce the products or refine existing products. The final product is a prototype of back-holder, monitoring filter and arranging a relaxation exercise as well as the manual book how to do this while in front of the computer to lower the fatigue level for computer users in Unimed’s Administration Center. In the first phase, observations and interviews have been conducted and identified the level of fatigue on the employees of computer users at Uniemd’s Administration Center using Bourdon Wiersma test and has obtained the following results: (1) The average velocity time of respondents in BAUK, BAAK and BAPSI after working with the value of interpretation of the speed obtained value of 8.4, WS 13 was in a good enough category, (2) The average of accuracy of respondents in BAUK, in BAAK and in BAPSI after working with interpretation value accuracy obtained Value of 5.5, WS 8 was in doubt-category. This result shows that computer users experienced a significant tiredness at the Unimed Administration Center, (3) the consistency of the average of the result in measuring tiredness level on computer users in Unimed’s Administration Center after working with values in consistency of interpretation obtained Value of 5.5 with WS 8 was put in a doubt-category, which means computer user in The Unimed Administration Center suffered an extreme fatigue. In phase II, based on the results of the first phase in this research, the researcher offers solutions such as the prototype of Back-Holder, monitoring filter, and design a proper relaxation exercise to reduce the fatigue level. Furthermore, in in order to maximize the exercise itself, a manual book will be given to employees whom regularly work in front of computers at Unimed’s Administration Center

  16. Computer use in primary care and patient-physician communication.

    PubMed

    Sobral, Dilermando; Rosenbaum, Marcy; Figueiredo-Braga, Margarida

    2015-07-08

    This study evaluated how physicians and patients perceive the impact of computer use on clinical communication, and how a patient-centered orientation can influence this impact. The study followed a descriptive cross-sectional design and included 106 family physicians and 392 patients. An original questionnaire assessed computer use, participants' perspective of its impact, and patient centered strategies. Physicians reported spending 42% of consultation time in contact with the computer. A negative impact of computer in patient-physician communication regarding the consultation length, confidentiality, maintaining eye contact, active listening to the patient, and ability to understand the patient was reported by physicians, while patients reported a positive effect for all the items. Physicians considered that the usual computer placement in their consultation room was significantly unfavorable to patient-physician communication. Physicians perceive the impact of computer use on patient-physician communication as negative, while patients have a positive perception of computer use on patient-physician communication. Consultation support can represent a challenge to physicians who recognize its negative impact in patient centered orientation. Medical education programs aiming to enhance specific communication skills and to better integrate computer use in primary care settings are needed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  17. GSDC: A Unique Data Center in Korea for HEP research

    NASA Astrophysics Data System (ADS)

    Ahn, Sang-Un

    2017-04-01

    Global Science experimental Data hub Center (GSDC) at Korea Institute of Science and Technology Information (KISTI) is a unique data center in South Korea established for promoting the fundamental research fields by supporting them with the expertise on Information and Communication Technology (ICT) and the infrastructure for High Performance Computing (HPC), High Throughput Computing (HTC) and Networking. GSDC has supported various research fields in South Korea dealing with the large scale of data, e.g. RENO experiment for neutrino research, LIGO experiment for gravitational wave detection, Genome sequencing project for bio-medical, and HEP experiments such as CDF at FNAL, Belle at KEK, and STAR at BNL. In particular, GSDC has run a Tier-1 center for ALICE experiment using the LHC at CERN since 2013. In this talk, we present the overview on computing infrastructure that GSDC runs for the research fields and we discuss on the data center infrastructure management system deployed at GSDC.

  18. High performance computing for advanced modeling and simulation of materials

    NASA Astrophysics Data System (ADS)

    Wang, Jue; Gao, Fei; Vazquez-Poletti, Jose Luis; Li, Jianjiang

    2017-02-01

    The First International Workshop on High Performance Computing for Advanced Modeling and Simulation of Materials (HPCMS2015) was held in Austin, Texas, USA, Nov. 18, 2015. HPCMS 2015 was organized by Computer Network Information Center (Chinese Academy of Sciences), University of Michigan, Universidad Complutense de Madrid, University of Science and Technology Beijing, Pittsburgh Supercomputing Center, China Institute of Atomic Energy, and Ames Laboratory.

  19. Children's Emerging Digital Literacies: Investigating Home Computing in Low- and Middle-Income Families. CCT Reports.

    ERIC Educational Resources Information Center

    Ba, Harouna; Tally, Bill; Tsikalas, Kallen

    The EDC (Educational Development Center) Center for Children and Technology (CCT) and Computers for Youth (CFY) completed a 1-year comparative study of children's use of computers in low- and middle-income homes. The study explores the digital divide as a literacy issue, rather than merely a technical one. Digital literacy is defined as a set of…

  20. Computer-aided dispatch--traffic management center field operational test : state of Utah final report

    DOT National Transportation Integrated Search

    2006-07-01

    This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch Traffic Management Center Integration Field Operations Test in the State of Utah. The document discusses evaluation findings in the followin...

  1. Aviation Mechanic General, Airframe, and Powerplant Knowledge Test Guide

    DOT National Transportation Integrated Search

    1995-01-01

    The FAA has available hundreds of computer testing centers nationwide. These testing centers offer the full range of airman knowledge tests. Refer to appendix 1 in this guide for a list of computer testing designees. This knowledge test guide was dev...

  2. Computer-aided dispatch--traffic management center field operational test final test plans : state of Utah

    DOT National Transportation Integrated Search

    2004-01-01

    The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : state of Utah". This document defines the objective, approach, an...

  3. 75 FR 70899 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-19

    ... submit to the Office of Management and Budget (OMB) for clearance the following proposal for collection... Annual Burden Hours: 2,952. Public Computer Center Reports (Quarterly and Annually) Number of Respondents... specific to Infrastructure and Comprehensive Community Infrastructure, Public Computer Center, and...

  4. PCs: Key to the Future. Business Center Provides Sound Skills and Good Attitudes.

    ERIC Educational Resources Information Center

    Pay, Renee W.

    1991-01-01

    The Advanced Computing/Management Training Program at Jordan Technical Center (Sandy, Utah) simulates an automated office to teach five sets of skills: computer architecture and operating systems, word processing, data processing, communications skills, and management principles. (SK)

  5. The CSM testbed software system: A development environment for structural analysis methods on the NAS CRAY-2

    NASA Technical Reports Server (NTRS)

    Gillian, Ronnie E.; Lotts, Christine G.

    1988-01-01

    The Computational Structural Mechanics (CSM) Activity at Langley Research Center is developing methods for structural analysis on modern computers. To facilitate that research effort, an applications development environment has been constructed to insulate the researcher from the many computer operating systems of a widely distributed computer network. The CSM Testbed development system was ported to the Numerical Aerodynamic Simulator (NAS) Cray-2, at the Ames Research Center, to provide a high end computational capability. This paper describes the implementation experiences, the resulting capability, and the future directions for the Testbed on supercomputers.

  6. How the Theory of Computing Can Help in Space Exploration

    NASA Technical Reports Server (NTRS)

    Kreinovich, Vladik; Longpre, Luc

    1997-01-01

    The opening of the NASA Pan American Center for Environmental and Earth Sciences (PACES) at the University of Texas at El Paso made it possible to organize the student Center for Theoretical Research and its Applications in Computer Science (TRACS). In this abstract, we briefly describe the main NASA-related research directions of the TRACS center, and give an overview of the preliminary results of student research.

  7. Examining the Fundamental Obstructs of Adopting Cloud Computing for 9-1-1 Dispatch Centers in the USA

    ERIC Educational Resources Information Center

    Osman, Abdulaziz

    2016-01-01

    The purpose of this research study was to examine the unknown fears of embracing cloud computing which stretches across measurements like fear of change from leaders and the complexity of the technology in 9-1-1 dispatch centers in USA. The problem that was addressed in the study was that many 9-1-1 dispatch centers in USA are still using old…

  8. Synergies and Distinctions between Computational Disciplines in Biomedical Research: Perspective from the Clinical and Translational Science Award Programs

    PubMed Central

    Bernstam, Elmer V.; Hersh, William R.; Johnson, Stephen B.; Chute, Christopher G.; Nguyen, Hien; Sim, Ida; Nahm, Meredith; Weiner, Mark; Miller, Perry; DiLaura, Robert P.; Overcash, Marc; Lehmann, Harold P.; Eichmann, David; Athey, Brian D.; Scheuermann, Richard H.; Anderson, Nick; Starren, Justin B.; Harris, Paul A.; Smith, Jack W.; Barbour, Ed; Silverstein, Jonathan C.; Krusch, David A.; Nagarajan, Rakesh; Becich, Michael J.

    2010-01-01

    Clinical and translational research increasingly requires computation. Projects may involve multiple computationally-oriented groups including information technology (IT) professionals, computer scientists and biomedical informaticians. However, many biomedical researchers are not aware of the distinctions among these complementary groups, leading to confusion, delays and sub-optimal results. Although written from the perspective of clinical and translational science award (CTSA) programs within academic medical centers, the paper addresses issues that extend beyond clinical and translational research. The authors describe the complementary but distinct roles of operational IT, research IT, computer science and biomedical informatics using a clinical data warehouse as a running example. In general, IT professionals focus on technology. The authors distinguish between two types of IT groups within academic medical centers: central or administrative IT (supporting the administrative computing needs of large organizations) and research IT (supporting the computing needs of researchers). Computer scientists focus on general issues of computation such as designing faster computers or more efficient algorithms, rather than specific applications. In contrast, informaticians are concerned with data, information and knowledge. Biomedical informaticians draw on a variety of tools, including but not limited to computers, to solve information problems in health care and biomedicine. The paper concludes with recommendations regarding administrative structures that can help to maximize the benefit of computation to biomedical research within academic health centers. PMID:19550198

  9. Funding Public Computing Centers: Balancing Broadband Availability and Expected Demand

    ERIC Educational Resources Information Center

    Jayakar, Krishna; Park, Eun-A

    2012-01-01

    The National Broadband Plan (NBP) recently announced by the Federal Communication Commission visualizes a significantly enhanced commitment to public computing centers (PCCs) as an element of the Commission's plans for promoting broadband availability. In parallel, the National Telecommunications and Information Administration (NTIA) has…

  10. Aerodynamic Characterization of a Modern Launch Vehicle

    NASA Technical Reports Server (NTRS)

    Hall, Robert M.; Holland, Scott D.; Blevins, John A.

    2011-01-01

    A modern launch vehicle is by necessity an extremely integrated design. The accurate characterization of its aerodynamic characteristics is essential to determine design loads, to design flight control laws, and to establish performance. The NASA Ares Aerodynamics Panel has been responsible for technical planning, execution, and vetting of the aerodynamic characterization of the Ares I vehicle. An aerodynamics team supporting the Panel consists of wind tunnel engineers, computational engineers, database engineers, and other analysts that address topics such as uncertainty quantification. The team resides at three NASA centers: Langley Research Center, Marshall Space Flight Center, and Ames Research Center. The Panel has developed strategies to synergistically combine both the wind tunnel efforts and the computational efforts with the goal of validating the computations. Selected examples highlight key flow physics and, where possible, the fidelity of the comparisons between wind tunnel results and the computations. Lessons learned summarize what has been gleaned during the project and can be useful for other vehicle development projects.

  11. Computer Program for Steady Transonic Flow over Thin Airfoils by Finite Elements

    DTIC Science & Technology

    1975-10-01

    COMPUTER PROGRAM FOR STEADY JJ TRANSONIC FLOW OVER THIN AIRFOILS BY g FINITE ELEMENTS • *q^^ r ̂ c HUNTSVILLE RESEARCH & ENGINEERING CENTER...jglMMi B Jun’ INC ORGANIMTION NAME ANO ADDRESS Lö^kfteed Missiles & Space Company, Inc. Huntsville Research & Engineering Center,^ Huntsville, Alab...This report was prepared by personnel in the Computational Mechamcs Section of the Lockheed Missiles fc Space Company, Inc.. Huntsville Research

  12. Developing computer training programs for blood bankers.

    PubMed

    Eisenbrey, L

    1992-01-01

    Two surveys were conducted in July 1991 to gather information about computer training currently performed within American Red Cross Blood Services Regions. One survey was completed by computer trainers from software developer-vendors and regional centers. The second survey was directed to the trainees, to determine their perception of the computer training. The surveys identified the major concepts, length of training, evaluations, and methods of instruction used. Strengths and weaknesses of training programs were highlighted by trainee respondents. Using the survey information and other sources, recommendations (including those concerning which computer skills and tasks should be covered) are made that can be used as guidelines for developing comprehensive computer training programs at any blood bank or blood center.

  13. Removing the center from computing: biology's new mode of digital knowledge production.

    PubMed

    November, Joseph

    2011-06-01

    This article shows how the USA's National Institutes of Health (NIH) helped to bring about a major shift in the way computers are used to produce knowledge and in the design of computers themselves as a consequence of its early 1960s efforts to introduce information technology to biologists. Starting in 1960 the NIH sought to reform the life sciences by encouraging researchers to make use of digital electronic computers, but despite generous federal support biologists generally did not embrace the new technology. Initially the blame fell on biologists' lack of appropriate (i.e. digital) data for computers to process. However, when the NIH consulted MIT computer architect Wesley Clark about this problem, he argued that the computer's quality as a device that was centralized posed an even greater challenge to potential biologist users than did the computer's need for digital data. Clark convinced the NIH that if the agency hoped to effectively computerize biology, it would need to satisfy biologists' experimental and institutional needs by providing them the means to use a computer without going to a computing center. With NIH support, Clark developed the 1963 Laboratory Instrument Computer (LINC), a small, real-time interactive computer intended to be used inside the laboratory and controlled entirely by its biologist users. Once built, the LINC provided a viable alternative to the 1960s norm of large computers housed in computing centers. As such, the LINC not only became popular among biologists, but also served in later decades as an important precursor of today's computing norm in the sciences and far beyond, the personal computer.

  14. Autonomic Computing for Spacecraft Ground Systems

    NASA Technical Reports Server (NTRS)

    Li, Zhenping; Savkli, Cetin; Jones, Lori

    2007-01-01

    Autonomic computing for spacecraft ground systems increases the system reliability and reduces the cost of spacecraft operations and software maintenance. In this paper, we present an autonomic computing solution for spacecraft ground systems at NASA Goddard Space Flight Center (GSFC), which consists of an open standard for a message oriented architecture referred to as the GMSEC architecture (Goddard Mission Services Evolution Center), and an autonomic computing tool, the Criteria Action Table (CAT). This solution has been used in many upgraded ground systems for NASA 's missions, and provides a framework for developing solutions with higher autonomic maturity.

  15. Computers as learning resources in the health sciences: impact and issues.

    PubMed Central

    Ellis, L B; Hannigan, G G

    1986-01-01

    Starting with two computer terminals in 1972, the Health Sciences Learning Resources Center of the University of Minnesota Bio-Medical Library expanded its instructional facilities to ten terminals and thirty-five microcomputers by 1985. Computer use accounted for 28% of total center circulation. The impact of these resources on health sciences curricula is described and issues related to use, support, and planning are raised and discussed. Judged by their acceptance and educational value, computers are successful health sciences learning resources at the University of Minnesota. PMID:3518843

  16. AHPCRC (Army High Performance Computing Research Center) Bulletin. Volume 1, Issue 2

    DTIC Science & Technology

    2011-01-01

    area and the researchers working on these projects. Also inside: news from the AHPCRC consortium partners at Morgan State University and the NASA ...Computing Research Center is provided by the supercomputing and research facilities at Stanford University and at the NASA Ames Research Center at...atomic and molecular level, he said. He noted that “every general would like to have” a Star Trek -like holodeck, where holographic avatars could

  17. SANs and Large Scale Data Migration at the NASA Center for Computational Sciences

    NASA Technical Reports Server (NTRS)

    Salmon, Ellen M.

    2004-01-01

    Evolution and migration are a way of life for provisioners of high-performance mass storage systems that serve high-end computers used by climate and Earth and space science researchers: the compute engines come and go, but the data remains. At the NASA Center for Computational Sciences (NCCS), disk and tape SANs are deployed to provide high-speed I/O for the compute engines and the hierarchical storage management systems. Along with gigabit Ethernet, they also enable the NCCS's latest significant migration: the transparent transfer of 300 Til3 of legacy HSM data into the new Sun SAM-QFS cluster.

  18. [Computer-aided prescribing: from utopia to reality].

    PubMed

    Suárez-Varela Ubeda, J; Beltrán Calvo, C; Molina López, T; Navarro Marín, P

    2005-05-31

    To determine whether the introduction of computer-aided prescribing helped reduce the administrative burden at primary care centers. Descriptive, cross-sectional design. Torreblanca Health Center in the province of Seville, southern Spain. From 29 October 2003 to the present a pilot project involving nine pharmacies in the basic health zone served by this health center has been running to evaluate computer-aided prescribing (the Receta XXI project) with real patients. All patients on the center's list of patients who came to the center for an administrative consultation to renew prescriptions for medications or supplies for long-term treatment. Total number of administrative visits per patient for patients who came to the center to renew prescriptions for long-term treatment, as recorded by the Diraya system (Historia Clinica Digital del Ciudadano, or Citizen's Digital Medical Record) during the period from February to July 2004. Total number of the same type of administrative visits recorded by the previous system (TASS) during the period from February to July 2003. The mean number of administrative visits per month during the period from February to July 2003 was 160, compared to a mean number of 64 visits during the period from February to July 2004. The reduction in the number of visits for prescription renewal was 60%. Introducing a system for computer-aided prescribing significantly reduced the number of administrative visits for prescription renewal for long-term treatment. This could help reduce the administrative burden considerably in primary care if the system were used in all centers.

  19. Computer systems and software engineering

    NASA Technical Reports Server (NTRS)

    Mckay, Charles W.

    1988-01-01

    The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

  20. Use of PL/1 in a Bibliographic Information Retrieval System.

    ERIC Educational Resources Information Center

    Schipma, Peter B.; And Others

    The Information Sciences section of ITT Research Institute (IITRI) has developed a Computer Search Center and is currently conducting a research project to explore computer searching of a variety of machine-readable data bases. The Center provides Selective Dissemination of Information services to academic, industrial and research organizations…

  1. Command History for 1990

    DTIC Science & Technology

    1991-05-01

    Marine Corps Tiaining Systems (CBESS) memorization training Inteligence Center, Dam Neck Threat memorization training Commander Tactical Wings, Atlantic...News Shipbuilding Technical training AEGIS Training Center, Dare Artificial Intelligence (Al) Tools Computerized firm-end analysis tools NETSCPAC...Technology Department and provides computational and electronic mail support for research in areas of artificial intelligence, computer-assisted instruction

  2. Postdoctoral Fellow | Center for Cancer Research

    Cancer.gov

    The Neuro-Oncology Branch (NOB), Center for Cancer Research (CCR), National Cancer Institute (NCI) of the National Institutes of Health (NIH) is seeking outstanding postdoctoral candidates interested in studying metabolic and cell signaling pathways in the context of brain cancers through construction of computational models amenable to formal computational analysis and

  3. Venus - Computer Simulated Global View Centered at 0 Degrees East Longitude

    NASA Image and Video Library

    1996-03-14

    This global view of the surface of Venus is centered at 0 degrees east longitude. NASA Magellan synthetic aperture radar mosaics from the first cycle of Magellan mapping were mapped onto a computer-simulated globe to create this image. http://photojournal.jpl.nasa.gov/catalog/PIA00257

  4. Computer-Aided Corrosion Program Management

    NASA Technical Reports Server (NTRS)

    MacDowell, Louis

    2010-01-01

    This viewgraph presentation reviews Computer-Aided Corrosion Program Management at John F. Kennedy Space Center. The contents include: 1) Corrosion at the Kennedy Space Center (KSC); 2) Requirements and Objectives; 3) Program Description, Background and History; 4) Approach and Implementation; 5) Challenges; 6) Lessons Learned; 7) Successes and Benefits; and 8) Summary and Conclusions.

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shankar, Arjun

    Computer scientist Arjun Shankar is director of the Compute and Data Environment for Science (CADES), ORNL’s multidisciplinary big data computing center. CADES offers computing, networking and data analytics to facilitate workflows for both ORNL and external research projects.

  6. Research on Using the Naturally Cold Air and the Snow for Data Center Air-conditioning, and Humidity Control

    NASA Astrophysics Data System (ADS)

    Tsuda, Kunikazu; Tano, Shunichi; Ichino, Junko

    To lower power consumption has becomes a worldwide concern. It is also becoming a bigger area in Computer Systems, such as reflected by the growing use of software-as-a-service and cloud computing whose market has increased since 2000, at the same time, the number of data centers that accumulates and manages the computer has increased rapidly. Power consumption at data centers is accounts for a big share of the entire IT power usage, and is still rapidly increasing. This research focuses on the air-conditioning that occupies accounts for the biggest portion of electric power consumption by data centers, and proposes to develop a technique to lower the power consumption by applying the natural cool air and the snow for control temperature and humidity. We verify those effectiveness of this approach by the experiment. Furthermore, we also examine the extent to which energy reduction is possible when a data center is located in Hokkaido.

  7. Investigating the Mechanism of Action and the Identification of Breast Carcinogens by Computational Analysis of Female Rodent Carcinogens

    DTIC Science & Technology

    2006-08-01

    preparing a COBRE Molecular Targets Project with a goal to extend the computational work of Specific Aims of this project to the discovery of novel...million Center of Biomedical Research Excellence ( COBRE ) grant from the National Center for Research Resources at the National Institutes of Health...three year COBRE -funded project in Molecular Targets. My recruitment to the University of Louisville’s Brown Cancer Center and my proposed COBRE

  8. DoDs Efforts to Consolidate Data Centers Need Improvement

    DTIC Science & Technology

    2016-03-29

    Consolidation Initiative, February 26, 2010. 3 Green IT minimizes negative environmental impact of IT operations by ensuring that computers and computer-related...objectives for consolidating data centers. DoD’s objectives were to: • reduce cost; • reduce environmental impact ; • improve efficiency and service levels...number of DoD data centers. Finding A DODIG-2016-068 │ 7 information in DCIM, the DoD CIO did not confirm whether those changes would impact DoD’s

  9. Bridging the digital divide by increasing computer and cancer literacy: community technology centers for head-start parents and families.

    PubMed

    Salovey, Peter; Williams-Piehota, Pamela; Mowad, Linda; Moret, Marta Elisa; Edlund, Denielle; Andersen, Judith

    2009-01-01

    This article describes the establishment of two community technology centers affiliated with Head Start early childhood education programs focused especially on Latino and African American parents of children enrolled in Head Start. A 6-hour course concerned with computer and cancer literacy was presented to 120 parents and other community residents who earned a free, refurbished, Internet-ready computer after completing the program. Focus groups provided the basis for designing the structure and content of the course and modifying it during the project period. An outcomes-based assessment comparing program participants with 70 nonparticipants at baseline, immediately after the course ended, and 3 months later suggested that the program increased knowledge about computers and their use, knowledge about cancer and its prevention, and computer use including health information-seeking via the Internet. The creation of community computer technology centers requires the availability of secure space, capacity of a community partner to oversee project implementation, and resources of this partner to ensure sustainability beyond core funding.

  10. The Center for Computational Biology: resources, achievements, and challenges

    PubMed Central

    Dinov, Ivo D; Thompson, Paul M; Woods, Roger P; Van Horn, John D; Shattuck, David W; Parker, D Stott

    2011-01-01

    The Center for Computational Biology (CCB) is a multidisciplinary program where biomedical scientists, engineers, and clinicians work jointly to combine modern mathematical and computational techniques, to perform phenotypic and genotypic studies of biological structure, function, and physiology in health and disease. CCB has developed a computational framework built around the Manifold Atlas, an integrated biomedical computing environment that enables statistical inference on biological manifolds. These manifolds model biological structures, features, shapes, and flows, and support sophisticated morphometric and statistical analyses. The Manifold Atlas includes tools, workflows, and services for multimodal population-based modeling and analysis of biological manifolds. The broad spectrum of biomedical topics explored by CCB investigators include the study of normal and pathological brain development, maturation and aging, discovery of associations between neuroimaging and genetic biomarkers, and the modeling, analysis, and visualization of biological shape, form, and size. CCB supports a wide range of short-term and long-term collaborations with outside investigators, which drive the center's computational developments and focus the validation and dissemination of CCB resources to new areas and scientific domains. PMID:22081221

  11. The Center for Computational Biology: resources, achievements, and challenges.

    PubMed

    Toga, Arthur W; Dinov, Ivo D; Thompson, Paul M; Woods, Roger P; Van Horn, John D; Shattuck, David W; Parker, D Stott

    2012-01-01

    The Center for Computational Biology (CCB) is a multidisciplinary program where biomedical scientists, engineers, and clinicians work jointly to combine modern mathematical and computational techniques, to perform phenotypic and genotypic studies of biological structure, function, and physiology in health and disease. CCB has developed a computational framework built around the Manifold Atlas, an integrated biomedical computing environment that enables statistical inference on biological manifolds. These manifolds model biological structures, features, shapes, and flows, and support sophisticated morphometric and statistical analyses. The Manifold Atlas includes tools, workflows, and services for multimodal population-based modeling and analysis of biological manifolds. The broad spectrum of biomedical topics explored by CCB investigators include the study of normal and pathological brain development, maturation and aging, discovery of associations between neuroimaging and genetic biomarkers, and the modeling, analysis, and visualization of biological shape, form, and size. CCB supports a wide range of short-term and long-term collaborations with outside investigators, which drive the center's computational developments and focus the validation and dissemination of CCB resources to new areas and scientific domains.

  12. Decomposition of algebraic sets and applications to weak centers of cubic systems

    NASA Astrophysics Data System (ADS)

    Chen, Xingwu; Zhang, Weinian

    2009-10-01

    There are many methods such as Gröbner basis, characteristic set and resultant, in computing an algebraic set of a system of multivariate polynomials. The common difficulties come from the complexity of computation, singularity of the corresponding matrices and some unnecessary factors in successive computation. In this paper, we decompose algebraic sets, stratum by stratum, into a union of constructible sets with Sylvester resultants, so as to simplify the procedure of elimination. Applying this decomposition to systems of multivariate polynomials resulted from period constants of reversible cubic differential systems which possess a quadratic isochronous center, we determine the order of weak centers and discuss the bifurcation of critical periods.

  13. Development of Advanced Computational Aeroelasticity Tools at NASA Langley Research Center

    NASA Technical Reports Server (NTRS)

    Bartels, R. E.

    2008-01-01

    NASA Langley Research Center has continued to develop its long standing computational tools to address new challenges in aircraft and launch vehicle design. This paper discusses the application and development of those computational aeroelastic tools. Four topic areas will be discussed: 1) Modeling structural and flow field nonlinearities; 2) Integrated and modular approaches to nonlinear multidisciplinary analysis; 3) Simulating flight dynamics of flexible vehicles; and 4) Applications that support both aeronautics and space exploration.

  14. Computational Fluid Dynamics. [numerical methods and algorithm development

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This collection of papers was presented at the Computational Fluid Dynamics (CFD) Conference held at Ames Research Center in California on March 12 through 14, 1991. It is an overview of CFD activities at NASA Lewis Research Center. The main thrust of computational work at Lewis is aimed at propulsion systems. Specific issues related to propulsion CFD and associated modeling will also be presented. Examples of results obtained with the most recent algorithm development will also be presented.

  15. Expanding HPC and Research Computing--The Sustainable Way

    ERIC Educational Resources Information Center

    Grush, Mary

    2009-01-01

    Increased demands for research and high-performance computing (HPC)--along with growing expectations for cost and environmental savings--are putting new strains on the campus data center. More and more, CIOs like the University of Notre Dame's (Indiana) Gordon Wishon are seeking creative ways to build more sustainable models for data center and…

  16. School Data Processing Services in Texas. A Cooperative Approach. [Revised.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin. Management Information Center.

    The Texas plan for computer services provides services to public school districts through a statewide network of 20 regional Education Service Centers (ESC). Each of the three Multi-Regional Processing Centers (MRPCs) operates a large computer facility providing school district services within from three to eight ESC regions; each of the five…

  17. School Data Processing Services in Texas: A Cooperative Approach.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin.

    The Texas plan for computer services provides services to public school districts through a statewide network of 20 regional Education Service Centers (ESC). Each of the three Multi-Regional Processing Centers (MRPCs) operates a large computer facility providing school district services within from three to eight ESC regions; each of the five…

  18. School Data Processing Services in Texas: A Cooperative Approach.

    ERIC Educational Resources Information Center

    Texas Education Agency, Austin.

    The Texas plan for computer services provides services to public school districts through a statewide network of 20 regional Education Service Centers (ESO). Each of the three Multi-Regional Processing Centers (MRPCs) operates a large computer facility providing school district services within from three to eight ESC regions each of the five…

  19. Remote Science Operation Center research

    NASA Technical Reports Server (NTRS)

    Banks, P. M.

    1986-01-01

    Progress in the following areas is discussed: the design, planning and operation of a remote science payload operations control center; design and planning of a data link via satellite; and the design and prototyping of an advanced workstation environment for multi-media (3-D computer aided design/computer aided engineering, voice, video, text) communications and operations.

  20. SAM: The "Search and Match" Computer Program of the Escherichia coli Genetic Stock Center

    ERIC Educational Resources Information Center

    Bachmann, B. J.; And Others

    1973-01-01

    Describes a computer program used at a genetic stock center to locate particular strains of bacteria. The program can match up to 30 strain descriptions requested by a researcher with the records on file. Uses of this particular program can be made in many fields. (PS)

  1. Hibbing Community College's Community Computer Center.

    ERIC Educational Resources Information Center

    Regional Technology Strategies, Inc., Carrboro, NC.

    This paper reports on the development of the Community Computer Center (CCC) at Hibbing Community College (HCC) in Minnesota. HCC is located in the largest U.S. iron mining area in the United States. Closures of steel-producing plants are affecting the Hibbing area. Outmigration, particularly of younger workers and their families, has been…

  2. 48 CFR 9905.506-60 - Illustrations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., installs a computer service center to begin operations on May 1. The operating expense related to the new... operating expenses of the computer service center for the 8-month part of the cost accounting period may be... 48 Federal Acquisition Regulations System 7 2013-10-01 2012-10-01 true Illustrations. 9905.506-60...

  3. The Mathematics and Computer Science Learning Center (MLC).

    ERIC Educational Resources Information Center

    Abraham, Solomon T.

    The Mathematics and Computer Science Learning Center (MLC) was established in the Department of Mathematics at North Carolina Central University during the fall semester of the 1982-83 academic year. The initial operations of the MLC were supported by grants to the University from the Burroughs-Wellcome Company and the Kenan Charitable Trust Fund.…

  4. Film Library Information Management System.

    ERIC Educational Resources Information Center

    Minnella, C. Vincent; And Others

    The computer program described not only allows the user to determine rental sources for a particular film title quickly, but also to select the least expensive of the sources. This program developed at SUNY Cortland's Sperry Learning Resources Center and Computer Center is designed to maintain accurate data on rental and purchase films in both…

  5. Microgravity

    NASA Image and Video Library

    1999-05-26

    Looking for a faster computer? How about an optical computer that processes data streams simultaneously and works with the speed of light? In space, NASA researchers have formed optical thin-film. By turning these thin-films into very fast optical computer components, scientists could improve computer tasks, such as pattern recognition. Dr. Hossin Abdeldayem, physicist at NASA/Marshall Space Flight Center (MSFC) in Huntsville, Al, is working with lasers as part of an optical system for pattern recognition. These systems can be used for automated fingerprinting, photographic scarning and the development of sophisticated artificial intelligence systems that can learn and evolve. Photo credit: NASA/Marshall Space Flight Center (MSFC)

  6. Knowledge management: Role of the the Radiation Safety Information Computational Center (RSICC)

    NASA Astrophysics Data System (ADS)

    Valentine, Timothy

    2017-09-01

    The Radiation Safety Information Computational Center (RSICC) at Oak Ridge National Laboratory (ORNL) is an information analysis center that collects, archives, evaluates, synthesizes and distributes information, data and codes that are used in various nuclear technology applications. RSICC retains more than 2,000 software packages that have been provided by code developers from various federal and international agencies. RSICC's customers (scientists, engineers, and students from around the world) obtain access to such computing codes (source and/or executable versions) and processed nuclear data files to promote on-going research, to ensure nuclear and radiological safety, and to advance nuclear technology. The role of such information analysis centers is critical for supporting and sustaining nuclear education and training programs both domestically and internationally, as the majority of RSICC's customers are students attending U.S. universities. Additionally, RSICC operates a secure CLOUD computing system to provide access to sensitive export-controlled modeling and simulation (M&S) tools that support both domestic and international activities. This presentation will provide a general review of RSICC's activities, services, and systems that support knowledge management and education and training in the nuclear field.

  7. Computer Learning for Young Children.

    ERIC Educational Resources Information Center

    Choy, Anita Y.

    1995-01-01

    Computer activities that combine education and entertainment make learning easy and fun for preschoolers. Computers encourage social skills, language and literacy skills, cognitive development, problem solving, and eye-hand coordination. The paper describes one teacher's experiences setting up a computer center and using computers with…

  8. Computer Literacy Project. A General Orientation in Basic Computer Concepts and Applications.

    ERIC Educational Resources Information Center

    Murray, David R.

    This paper proposes a two-part, basic computer literacy program for university faculty, staff, and students with no prior exposure to computers. The program described would introduce basic computer concepts and computing center service programs and resources; provide fundamental preparation for other computer courses; and orient faculty towards…

  9. Physics of the 1 Teraflop RIKEN-BNL-Columbia QCD project. Proceedings of RIKEN BNL Research Center workshop: Volume 13

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-10-16

    A workshop was held at the RIKEN-BNL Research Center on October 16, 1998, as part of the first anniversary celebration for the center. This meeting brought together the physicists from RIKEN-BNL, BNL and Columbia who are using the QCDSP (Quantum Chromodynamics on Digital Signal Processors) computer at the RIKEN-BNL Research Center for studies of QCD. Many of the talks in the workshop were devoted to domain wall fermions, a discretization of the continuum description of fermions which preserves the global symmetries of the continuum, even at finite lattice spacing. This formulation has been the subject of analytic investigation for somemore » time and has reached the stage where large-scale simulations in QCD seem very promising. With the computational power available from the QCDSP computers, scientists are looking forward to an exciting time for numerical simulations of QCD.« less

  10. Computational Science News | Computational Science | NREL

    Science.gov Websites

    -Cooled High-Performance Computing Technology at the ESIF February 28, 2018 NREL Launches New Website for High-Performance Computing System Users The National Renewable Energy Laboratory (NREL) Computational Science Center has launched a revamped website for users of the lab's high-performance computing (HPC

  11. Computer Training for Seniors: An Academic-Community Partnership

    ERIC Educational Resources Information Center

    Sanders, Martha J.; O'Sullivan, Beth; DeBurra, Katherine; Fedner, Alesha

    2013-01-01

    Computer technology is integral to information retrieval, social communication, and social interaction. However, only 47% of seniors aged 65 and older use computers. The purpose of this study was to determine the impact of a client-centered computer program on computer skills, attitudes toward computer use, and generativity in novice senior…

  12. Benefits Analysis of Multi-Center Dynamic Weather Routes

    NASA Technical Reports Server (NTRS)

    Sheth, Kapil; McNally, David; Morando, Alexander; Clymer, Alexis; Lock, Jennifer; Petersen, Julien

    2014-01-01

    Dynamic weather routes are flight plan corrections that can provide airborne flights more than user-specified minutes of flying-time savings, compared to their current flight plan. These routes are computed from the aircraft's current location to a flight plan fix downstream (within a predefined limit region), while avoiding forecasted convective weather regions. The Dynamic Weather Routes automation has been continuously running with live air traffic data for a field evaluation at the American Airlines Integrated Operations Center in Fort Worth, TX since July 31, 2012, where flights within the Fort Worth Air Route Traffic Control Center are evaluated for time savings. This paper extends the methodology to all Centers in United States and presents benefits analysis of Dynamic Weather Routes automation, if it was implemented in multiple airspace Centers individually and concurrently. The current computation of dynamic weather routes requires a limit rectangle so that a downstream capture fix can be selected, preventing very large route changes spanning several Centers. In this paper, first, a method of computing a limit polygon (as opposed to a rectangle used for Fort Worth Center) is described for each of the 20 Centers in the National Airspace System. The Future ATM Concepts Evaluation Tool, a nationwide simulation and analysis tool, is used for this purpose. After a comparison of results with the Center-based Dynamic Weather Routes automation in Fort Worth Center, results are presented for 11 Centers in the contiguous United States. These Centers are generally most impacted by convective weather. A breakdown of individual Center and airline savings is presented and the results indicate an overall average savings of about 10 minutes of flying time are obtained per flight.

  13. Library Media Learning and Play Center.

    ERIC Educational Resources Information Center

    Faber, Therese; And Others

    Preschool educators developed a library media learning and play center to enable children to "experience" a library; establish positive attitudes about the library; and encourage respect for self, others, and property. The center had the following areas: check-in and check-out desk, quiet reading section, computer center, listening center, video…

  14. RIACS

    NASA Technical Reports Server (NTRS)

    Moore, Robert C.

    1998-01-01

    The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities that serves as a bridge between NASA and the academic community. Under a five-year co-operative agreement with NASA, research at RIACS is focused on areas that are strategically enabling to the Ames Research Center's role as NASA's Center of Excellence for Information Technology. The primary mission of RIACS is charted to carry out research and development in computer science. This work is devoted in the main to tasks that are strategically enabling with respect to NASA's bold mission in space exploration and aeronautics. There are three foci for this work: (1) Automated Reasoning. (2) Human-Centered Computing. and (3) High Performance Computing and Networking. RIACS has the additional goal of broadening the base of researcher in these areas of importance to the nation's space and aeronautics enterprises. Through its visiting scientist program, RIACS facilitates the participation of university-based researchers, including both faculty and students, in the research activities of NASA and RIACS. RIACS researchers work in close collaboration with NASA computer scientists on projects such as the Remote Agent Experiment on Deep Space One mission, and Super-Resolution Surface Modeling.

  15. The effective use of virtualization for selection of data centers in a cloud computing environment

    NASA Astrophysics Data System (ADS)

    Kumar, B. Santhosh; Parthiban, Latha

    2018-04-01

    Data centers are the places which consist of network of remote servers to store, access and process the data. Cloud computing is a technology where users worldwide will submit the tasks and the service providers will direct the requests to the data centers which are responsible for execution of tasks. The servers in the data centers need to employ the virtualization concept so that multiple tasks can be executed simultaneously. In this paper we proposed an algorithm for data center selection based on energy of virtual machines created in server. The virtualization energy in each of the server is calculated and total energy of the data center is obtained by the summation of individual server energy. The tasks submitted are routed to the data center with least energy consumption which will result in minimizing the operational expenses of a service provider.

  16. A hypothesis on the formation of the primary ossification centers in the membranous neurocranium: a mathematical and computational model.

    PubMed

    Garzón-Alvarado, Diego A

    2013-01-21

    This article develops a model of the appearance and location of the primary centers of ossification in the calvaria. The model uses a system of reaction-diffusion equations of two molecules (BMP and Noggin) whose behavior is of type activator-substrate and its solution produces Turing patterns, which represents the primary ossification centers. Additionally, the model includes the level of cell maturation as a function of the location of mesenchymal cells. Thus the mature cells can become osteoblasts due to the action of BMP2. Therefore, with this model, we can have two frontal primary centers, two parietal, and one, two or more occipital centers. The location of these centers in the simplified computational model is highly consistent with those centers found at an embryonic level. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Establishment of a Beta Test Center for the NPARC Code at Central State University

    NASA Technical Reports Server (NTRS)

    Okhio, Cyril B.

    1996-01-01

    Central State University has received a supplementary award to purchase computer workstations for the NPARC (National Propulsion Ames Research Center) computational fluid dynamics code BETA Test Center. The computational code has also been acquired for installation on the workstations. The acquisition of this code is an initial step for CSU in joining an alliance composed of NASA, AEDC, The Aerospace Industry, and academia. A post-Doctoral research Fellow from a neighboring university will assist the PI in preparing a template for Tutorial documents for the BETA test center. The major objective of the alliance is to establish a national applications-oriented CFD capability, centered on the NPARC code. By joining the alliance, the BETA test center at CSU will allow the PI, as well as undergraduate and post-graduate students to test the capability of the NPARC code in predicting the physics of aerodynamic/geometric configurations that are of interest to the alliance. Currently, CSU is developing a once a year, hands-on conference/workshop based upon the experience acquired from running other codes similar to the NPARC code in the first year of this grant.

  18. BNL ATLAS Grid Computing

    ScienceCinema

    Michael Ernst

    2017-12-09

    As the sole Tier-1 computing facility for ATLAS in the United States and the largest ATLAS computing center worldwide Brookhaven provides a large portion of the overall computing resources for U.S. collaborators and serves as the central hub for storing,

  19. Patient-centered computing: can it curb malpractice risk?

    PubMed

    Bartlett, E E

    1993-01-01

    The threat of a medical malpractice suit represents a major cause of career dissatisfaction for American physicians. Patient-centered computing may improve physician-patient communications, thereby reducing liability risk. This review describes programs that have sought to enhance patient education and involvement pertaining to 5 major categories of malpractice lawsuits: Diagnosis, medications, obstetrics, surgery, and treatment errors.

  20. Patient-centered computing: can it curb malpractice risk?

    PubMed Central

    Bartlett, E. E.

    1993-01-01

    The threat of a medical malpractice suit represents a major cause of career dissatisfaction for American physicians. Patient-centered computing may improve physician-patient communications, thereby reducing liability risk. This review describes programs that have sought to enhance patient education and involvement pertaining to 5 major categories of malpractice lawsuits: Diagnosis, medications, obstetrics, surgery, and treatment errors. PMID:8130563

  1. Initial Comparison of Single Cylinder Stirling Engine Computer Model Predictions with Test Results

    NASA Technical Reports Server (NTRS)

    Tew, R. C., Jr.; Thieme, L. G.; Miao, D.

    1979-01-01

    A Stirling engine digital computer model developed at NASA Lewis Research Center was configured to predict the performance of the GPU-3 single-cylinder rhombic drive engine. Revisions to the basic equations and assumptions are discussed. Model predictions with the early results of the Lewis Research Center GPU-3 tests are compared.

  2. A Report on the Design and Construction of the University of Massachusetts Computer Science Center.

    ERIC Educational Resources Information Center

    Massachusetts State Office of the Inspector General, Boston.

    This report describes a review conducted by the Massachusetts Office of the Inspector General on the construction of the Computer Science and Development Center at the University of Massachusetts, Amherst. The office initiated the review after hearing concerns about the management of the project, including its delayed completion and substantial…

  3. Higher-order methods for simulations on quantum computers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sornborger, A.T.; Stewart, E.D.

    1999-09-01

    To implement many-qubit gates for use in quantum simulations on quantum computers efficiently, we develop and present methods reexpressing exp[[minus]i(H[sub 1]+H[sub 2]+[center dot][center dot][center dot])[Delta]t] as a product of factors exp[[minus]iH[sub 1][Delta]t], exp[[minus]iH[sub 2][Delta]t],[hor ellipsis], which is accurate to third or fourth order in [Delta]t. The methods we derive are an extended form of the symplectic method, and can also be used for an integration of classical Hamiltonians on classical computers. We derive both integral and irrational methods, and find the most efficient methods in both cases. [copyright] [ital 1999] [ital The American Physical Society

  4. Impact of configuration management system of computer center on support of scientific projects throughout their lifecycle

    NASA Astrophysics Data System (ADS)

    Bogdanov, A. V.; Iuzhanin, N. V.; Zolotarev, V. I.; Ezhakova, T. R.

    2017-12-01

    In this article the problem of scientific projects support throughout their lifecycle in the computer center is considered in every aspect of support. Configuration Management system plays a connecting role in processes related to the provision and support of services of a computer center. In view of strong integration of IT infrastructure components with the use of virtualization, control of infrastructure becomes even more critical to the support of research projects, which means higher requirements for the Configuration Management system. For every aspect of research projects support, the influence of the Configuration Management system is being reviewed and development of the corresponding elements of the system is being described in the present paper.

  5. Finance for practicing radiologists.

    PubMed

    Berlin, Jonathan W; Lexa, Frank James

    2005-03-01

    This article reviews basic finance for radiologists. Using the example of a hypothetical outpatient computed tomography center, readers are introduced to the concept of net present value. This concept refers to the current real value of anticipated income in the future, realizing that revenue in the future has less value than it does today. Positive net present value projects add wealth to a practice and should be pursued. The article details how costs and revenues for a hypothetical outpatient computed tomography center are determined and elucidates the difference between fixed costs and variable costs. The article provides readers with the steps used to calculate the break-even volume for an outpatient computed tomography center given situation-specific assumptions regarding staff, equipment lease rates, rent, and third-party payer mix.

  6. Readiness of healthcare providers for eHealth: the case from primary healthcare centers in Lebanon.

    PubMed

    Saleh, Shadi; Khodor, Rawya; Alameddine, Mohamad; Baroud, Maysa

    2016-11-10

    eHealth can positively impact the efficiency and quality of healthcare services. Its potential benefits extend to the patient, healthcare provider, and organization. Primary healthcare (PHC) settings may particularly benefit from eHealth. In these settings, healthcare provider readiness is key to successful eHealth implementation. Accordingly, it is necessary to explore the potential readiness of providers to use eHealth tools. Therefore, the purpose of this study was to assess the readiness of healthcare providers working in PHC centers in Lebanon to use eHealth tools. A self-administered questionnaire was used to assess participants' socio-demographics, computer use, literacy, and access, and participants' readiness for eHealth implementation (appropriateness, management support, change efficacy, personal beneficence). The study included primary healthcare providers (physicians, nurses, other providers) working in 22 PHC centers distributed across Lebanon. Descriptive and bivariate analyses (ANOVA, independent t-test, Kruskal Wallis, Tamhane's T2) were used to compare participant characteristics to the level of readiness for the implementation of eHealth. Of the 541 questionnaires, 213 were completed (response rate: 39.4 %). The majority of participants were physicians (46.9 %), and nurses (26.8 %). Most physicians (54.0 %), nurses (61.4 %), and other providers (50.9 %) felt comfortable using computers, and had access to computers at their PHC center (physicians: 77.0 %, nurses: 87.7 %, others: 92.5 %). Frequency of computer use varied. The study found a significant difference for personal beneficence, management support, and change efficacy among different healthcare providers, and relative to participants' level of comfort using computers. There was a significant difference by level of comfort using computers and appropriateness. A significant difference was also found between those with access to computers in relation to personal beneficence and change efficacy; and between frequency of computer use and change efficacy. The implementation of eHealth cannot be achieved without the readiness of healthcare providers. This study demonstrates that the majority of healthcare providers at PHC centers across Lebanon are ready for eHealth implementation. The findings of this study can be considered by decision makers to enhance and scale-up the use of eHealth in PHC centers nationally. Efforts should be directed towards capacity building for healthcare providers.

  7. Selected Papers of the Southeastern Writing Center Association.

    ERIC Educational Resources Information Center

    Roberts, David H., Ed.; Wolff, William C., Ed.

    Addressing a variety of concerns of writing center directors and staff, directors of freshman composition, and English department chairs, the papers in this collection discuss writing center research and evaluation, writing center tutors, and computers in the writing center. The titles of the essays and their authors are as follows: (1) "Narrative…

  8. The Hospital-Based Drug Information Center.

    ERIC Educational Resources Information Center

    Hopkins, Leigh

    1982-01-01

    Discusses the rise of drug information centers in hospitals and medical centers, highlighting staffing, functions, typical categories of questions received by centers, and sources used. An appendix of drug information sources included in texts, updated services, journals, and computer databases is provided. Thirteen references are listed. (EJS)

  9. Singularity: Scientific containers for mobility of compute.

    PubMed

    Kurtzer, Gregory M; Sochat, Vanessa; Bauer, Michael W

    2017-01-01

    Here we present Singularity, software developed to bring containers and reproducibility to scientific computing. Using Singularity containers, developers can work in reproducible environments of their choosing and design, and these complete environments can easily be copied and executed on other platforms. Singularity is an open source initiative that harnesses the expertise of system and software engineers and researchers alike, and integrates seamlessly into common workflows for both of these groups. As its primary use case, Singularity brings mobility of computing to both users and HPC centers, providing a secure means to capture and distribute software and compute environments. This ability to create and deploy reproducible environments across these centers, a previously unmet need, makes Singularity a game changing development for computational science.

  10. Singularity: Scientific containers for mobility of compute

    PubMed Central

    Kurtzer, Gregory M.; Bauer, Michael W.

    2017-01-01

    Here we present Singularity, software developed to bring containers and reproducibility to scientific computing. Using Singularity containers, developers can work in reproducible environments of their choosing and design, and these complete environments can easily be copied and executed on other platforms. Singularity is an open source initiative that harnesses the expertise of system and software engineers and researchers alike, and integrates seamlessly into common workflows for both of these groups. As its primary use case, Singularity brings mobility of computing to both users and HPC centers, providing a secure means to capture and distribute software and compute environments. This ability to create and deploy reproducible environments across these centers, a previously unmet need, makes Singularity a game changing development for computational science. PMID:28494014

  11. Deep Space Network (DSN), Network Operations Control Center (NOCC) computer-human interfaces

    NASA Technical Reports Server (NTRS)

    Ellman, Alvin; Carlton, Magdi

    1993-01-01

    The Network Operations Control Center (NOCC) of the DSN is responsible for scheduling the resources of DSN, and monitoring all multi-mission spacecraft tracking activities in real-time. Operations performs this job with computer systems at JPL connected to over 100 computers at Goldstone, Australia and Spain. The old computer system became obsolete, and the first version of the new system was installed in 1991. Significant improvements for the computer-human interfaces became the dominant theme for the replacement project. Major issues required innovating problem solving. Among these issues were: How to present several thousand data elements on displays without overloading the operator? What is the best graphical representation of DSN end-to-end data flow? How to operate the system without memorizing mnemonics of hundreds of operator directives? Which computing environment will meet the competing performance requirements? This paper presents the technical challenges, engineering solutions, and results of the NOCC computer-human interface design.

  12. Computer Center: Setting Up a Microcomputer Center--1 Person's Perspective.

    ERIC Educational Resources Information Center

    Duhrkopf, Richard, Ed.; Collins, Michael, A. J., Ed.

    1988-01-01

    Considers eight components to be considered in setting up a microcomputer center for use with college classes. Discussions include hardware, software, physical facility, furniture, technical support, personnel, continuing financial expenditures, and security. (CW)

  13. Cloud Computing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pete Beckman and Ian Foster

    Chicago Matters: Beyond Burnham (WTTW). Chicago has become a world center of "cloud computing." Argonne experts Pete Beckman and Ian Foster explain what "cloud computing" is and how you probably already use it on a daily basis.

  14. Lift and center of pressure of wing-body-tail combinations at subsonic, transonic, and supersonic speeds

    NASA Technical Reports Server (NTRS)

    Pitts, William C; Nielsen, Jack N; Kaattari, George E

    1957-01-01

    A method is presented for calculating the lift and centers of pressure of wing-body and wing-body-tail combinations at subsonic, transonic, and supersonic speeds. A set of design charts and a computing table are presented which reduce the computations to routine operations. Comparison between the estimated and experimental characteristics for a number of wing-body and wing-body-tail combinations shows correlation to within + or - 10 percent on lift and to within about + or - 0.02 of the body length on center of pressure.

  15. The Role of Computers in Research and Development at Langley Research Center

    NASA Technical Reports Server (NTRS)

    Wieseman, Carol D. (Compiler)

    1994-01-01

    This document is a compilation of presentations given at a workshop on the role cf computers in research and development at the Langley Research Center. The objectives of the workshop were to inform the Langley Research Center community of the current software systems and software practices in use at Langley. The workshop was organized in 10 sessions: Software Engineering; Software Engineering Standards, methods, and CASE tools; Solutions of Equations; Automatic Differentiation; Mosaic and the World Wide Web; Graphics and Image Processing; System Design Integration; CAE Tools; Languages; and Advanced Topics.

  16. Mass storage system experiences and future needs at the National Center for Atmospheric Research

    NASA Technical Reports Server (NTRS)

    Olear, Bernard T.

    1991-01-01

    A summary and viewgraphs of a discussion presented at the National Space Science Data Center (NSSDC) Mass Storage Workshop is included. Some of the experiences of the Scientific Computing Division at the National Center for Atmospheric Research (NCAR) dealing the the 'data problem' are discussed. A brief history and a development of some basic mass storage system (MSS) principles are given. An attempt is made to show how these principles apply to the integration of various components into NCAR's MSS. Future MSS needs for future computing environments is discussed.

  17. Computer Aided Manufacturing.

    ERIC Educational Resources Information Center

    Insolia, Gerard

    This document contains course outlines in computer-aided manufacturing developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The four units of the course cover the following: (1) introduction to computer-assisted design (CAD)/computer-assisted manufacturing (CAM); (2) CAM…

  18. Development of automated electromagnetic compatibility test facilities at Marshall Space Flight Center

    NASA Technical Reports Server (NTRS)

    Harrison, Cecil A.

    1986-01-01

    The efforts to automate the electromagentic compatibility (EMC) test facilites at Marshall Flight Center were examined. A battery of nine standard tests is to be integrated by means of a desktop computer-controller in order to provide near real-time data assessment, store the data acquired during testing on flexible disk, and provide computer production of the certification report.

  19. Mind Transplants Or: The Role of Computer Assisted Instruction in the Future of the Library.

    ERIC Educational Resources Information Center

    Lyon, Becky J.

    Computer assisted instruction (CAI) may well represent the next phase in the involvement of the library or learning resources center with media and the educational process. The Lister Hill Center Experimental CAI Network was established in July, 1972, on the recommendation of the National Library of Medicine, to test the feasibility of sharing CAI…

  20. Center for Efficient Exascale Discretizations Software Suite

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kolev, Tzanio; Dobrev, Veselin; Tomov, Vladimir

    The CEED Software suite is a collection of generally applicable software tools focusing on the following computational motives: PDE discretizations on unstructured meshes, high-order finite element and spectral element methods and unstructured adaptive mesh refinement. All of this software is being developed as part of CEED, a co-design Center for Efficient Exascale Discretizations, within DOE's Exascale Computing Project (ECP) program.

  1. The Development of a Learning Dashboard for Lecturers: A Case Study on a Student-Centered E-Learning Environment

    ERIC Educational Resources Information Center

    Santoso, Harry B.; Batuparan, Alivia Khaira; Isal, R. Yugo K.; Goodridge, Wade H.

    2018-01-01

    Student Centered e-Learning Environment (SCELE) is a Moodle-based learning management system (LMS) that has been modified to enhance learning within a computer science department curriculum offered by the Faculty of Computer Science of large public university in Indonesia. This Moodle provided a mechanism to record students' activities when…

  2. CNC Turning Center Operations and Prove Out. Computer Numerical Control Operator/Programmer. 444-334.

    ERIC Educational Resources Information Center

    Skowronski, Steven D.

    This student guide provides materials for a course designed to instruct the student in the recommended procedures used when setting up tooling and verifying part programs for a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 discusses course content and reviews and demonstrates set-up procedures…

  3. Pilot Project in Computer Assisted Instruction for Adult Basic Education Students. Adult Learning Centers, the Adult Program, 1982-83.

    ERIC Educational Resources Information Center

    Buckley, Elizabeth; Johnston, Peter

    In February 1977, computer assisted instruction (CAI) was introducted to the Great Neck Adult Learning Centers (GNALC) to promote greater cognitive and affective growth of educationally disadvantaged adults. The project expanded to include not only adult basic education (ABE) students studying in the learning laboratory, but also ABE students…

  4. The Development of a Robot-Based Learning Companion: A User-Centered Design Approach

    ERIC Educational Resources Information Center

    Hsieh, Yi-Zeng; Su, Mu-Chun; Chen, Sherry Y.; Chen, Gow-Dong

    2015-01-01

    A computer-vision-based method is widely employed to support the development of a variety of applications. In this vein, this study uses a computer-vision-based method to develop a playful learning system, which is a robot-based learning companion named RobotTell. Unlike existing playful learning systems, a user-centered design (UCD) approach is…

  5. CENTER CONDITIONS AND CYCLICITY FOR A FAMILY OF CUBIC SYSTEMS: COMPUTER ALGEBRA APPROACH.

    PubMed

    Ferčec, Brigita; Mahdi, Adam

    2013-01-01

    Using methods of computational algebra we obtain an upper bound for the cyclicity of a family of cubic systems. We overcame the problem of nonradicality of the associated Bautin ideal by moving from the ring of polynomials to a coordinate ring. Finally, we determine the number of limit cycles bifurcating from each component of the center variety.

  6. About High-Performance Computing at NREL | High-Performance Computing |

    Science.gov Websites

    Day(s): First Thursday of every month Hours: 11 a.m. - 12 p.m. Location: ESIF B211-Edison Conference Room Contact: Jennifer Southerland Insight Center - Visualization Tools Day(s): Every Monday Hours: 10 Data System Day(s): Every Monday Hours: 10 a.m. - 11 a.m. Location: ESIF B308-Insight Center

  7. Exploring the Effects of Student-Centered Project-Based Learning with Initiation on Students' Computing Skills: A Quasi-Experimental Study of Digital Storytelling

    ERIC Educational Resources Information Center

    Tsai, Chia-Wen; Shen, Pei-Di; Lin, Rong-An

    2015-01-01

    This study investigated, via quasi-experiments, the effects of student-centered project-based learning with initiation (SPBL with Initiation) on the development of students' computing skills. In this study, 96 elementary school students were selected from four class sections taking a course titled "Digital Storytelling" and were assigned…

  8. High-End Scientific Computing

    EPA Pesticide Factsheets

    EPA uses high-end scientific computing, geospatial services and remote sensing/imagery analysis to support EPA's mission. The Center for Environmental Computing (CEC) assists the Agency's program offices and regions to meet staff needs in these areas.

  9. HPCCP/CAS Workshop Proceedings 1998

    NASA Technical Reports Server (NTRS)

    Schulbach, Catherine; Mata, Ellen (Editor); Schulbach, Catherine (Editor)

    1999-01-01

    This publication is a collection of extended abstracts of presentations given at the HPCCP/CAS (High Performance Computing and Communications Program/Computational Aerosciences Project) Workshop held on August 24-26, 1998, at NASA Ames Research Center, Moffett Field, California. The objective of the Workshop was to bring together the aerospace high performance computing community, consisting of airframe and propulsion companies, independent software vendors, university researchers, and government scientists and engineers. The Workshop was sponsored by the HPCCP Office at NASA Ames Research Center. The Workshop consisted of over 40 presentations, including an overview of NASA's High Performance Computing and Communications Program and the Computational Aerosciences Project; ten sessions of papers representative of the high performance computing research conducted within the Program by the aerospace industry, academia, NASA, and other government laboratories; two panel sessions; and a special presentation by Mr. James Bailey.

  10. NASA Center for Climate Simulation (NCCS) Advanced Technology AT5 Virtualized Infiniband Report

    NASA Technical Reports Server (NTRS)

    Thompson, John H.; Bledsoe, Benjamin C.; Wagner, Mark; Shakshober, John; Fromkin, Russ

    2013-01-01

    The NCCS is part of the Computational and Information Sciences and Technology Office (CISTO) of Goddard Space Flight Center's (GSFC) Sciences and Exploration Directorate. The NCCS's mission is to enable scientists to increase their understanding of the Earth, the solar system, and the universe by supplying state-of-the-art high performance computing (HPC) solutions. To accomplish this mission, the NCCS (https://www.nccs.nasa.gov) provides high performance compute engines, mass storage, and network solutions to meet the specialized needs of the Earth and space science user communities

  11. ED adds business center to wait area.

    PubMed

    2007-10-01

    Providing your patients with Internet access in the waiting area can do wonders for their attitudes and make them much more understanding of long wait times. What's more, it doesn't take a fortune to create a business center. The ED at Florida Hospital Celebration (FL) Health made a world of difference with just a couple of computers and a printer. Have your information technology staff set the computers up to preserve the privacy of your internal computer system, and block out offensive sites. Access to medical sites can help reinforce your patient education efforts.

  12. Application of technology developed for flight simulation at NASA. Langley Research Center

    NASA Technical Reports Server (NTRS)

    Cleveland, Jeff I., II

    1991-01-01

    In order to meet the stringent time-critical requirements for real-time man-in-the-loop flight simulation, computer processing operations including mathematical model computation and data input/output to the simulators must be deterministic and be completed in as short a time as possible. Personnel at NASA's Langley Research Center are currently developing the use of supercomputers for simulation mathematical model computation for real-time simulation. This, coupled with the use of an open systems software architecture, will advance the state-of-the-art in real-time flight simulation.

  13. Implementing the Data Center Energy Productivity Metric in a High Performance Computing Data Center

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sego, Landon H.; Marquez, Andres; Rawson, Andrew

    2013-06-30

    As data centers proliferate in size and number, the improvement of their energy efficiency and productivity has become an economic and environmental imperative. Making these improvements requires metrics that are robust, interpretable, and practical. We discuss the properties of a number of the proposed metrics of energy efficiency and productivity. In particular, we focus on the Data Center Energy Productivity (DCeP) metric, which is the ratio of useful work produced by the data center to the energy consumed performing that work. We describe our approach for using DCeP as the principal outcome of a designed experiment using a highly instrumented,more » high-performance computing data center. We found that DCeP was successful in clearly distinguishing different operational states in the data center, thereby validating its utility as a metric for identifying configurations of hardware and software that would improve energy productivity. We also discuss some of the challenges and benefits associated with implementing the DCeP metric, and we examine the efficacy of the metric in making comparisons within a data center and between data centers.« less

  14. ENVIRONMENTAL BIOINFORMATICS AND COMPUTATIONAL TOXICOLOGY CENTER

    EPA Science Inventory

    The Center activities focused on integrating developmental efforts from the various research projects of the Center, and collaborative applications involving scientists from other institutions and EPA, to enhance research in critical areas. A representative sample of specif...

  15. Improving User Notification on Frequently Changing HPC Environments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fuson, Christopher B; Renaud, William A

    2016-01-01

    Today s HPC centers user environments can be very complex. Centers often contain multiple large complicated computational systems each with their own user environment. Changes to a system s environment can be very impactful; however, a center s user environment is, in one-way or another, frequently changing. Because of this, it is vital for centers to notify users of change. For users, untracked changes can be costly, resulting in unnecessary debug time as well as wasting valuable compute allocations and research time. Communicating frequent change to diverse user communities is a common and ongoing task for HPC centers. This papermore » will cover the OLCF s current processes and methods used to communicate change to users of the center s large Cray systems and supporting resources. The paper will share lessons learned and goals as well as practices, tools, and methods used to continually improve and reach members of the OLCF user community.« less

  16. Robust pupil center detection using a curvature algorithm

    NASA Technical Reports Server (NTRS)

    Zhu, D.; Moore, S. T.; Raphan, T.; Wall, C. C. (Principal Investigator)

    1999-01-01

    Determining the pupil center is fundamental for calculating eye orientation in video-based systems. Existing techniques are error prone and not robust because eyelids, eyelashes, corneal reflections or shadows in many instances occlude the pupil. We have developed a new algorithm which utilizes curvature characteristics of the pupil boundary to eliminate these artifacts. Pupil center is computed based solely on points related to the pupil boundary. For each boundary point, a curvature value is computed. Occlusion of the boundary induces characteristic peaks in the curvature function. Curvature values for normal pupil sizes were determined and a threshold was found which together with heuristics discriminated normal from abnormal curvature. Remaining boundary points were fit with an ellipse using a least squares error criterion. The center of the ellipse is an estimate of the pupil center. This technique is robust and accurately estimates pupil center with less than 40% of the pupil boundary points visible.

  17. RIACS

    NASA Technical Reports Server (NTRS)

    Moore, Robert C.

    1998-01-01

    The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities that serves as a bridge between NASA and the academic community. Under a five-year co-operative agreement with NASA, research at RIACS is focused on areas that are strategically enabling to the Ames Research Center's role as NASA's Center of Excellence for Information Technology. Research is carried out by a staff of full-time scientist,augmented by visitors, students, post doctoral candidates and visiting university faculty. The primary mission of RIACS is charted to carry out research and development in computer science. This work is devoted in the main to tasks that are strategically enabling with respect to NASA's bold mission in space exploration and aeronautics. There are three foci for this work: Automated Reasoning. Human-Centered Computing. and High Performance Computing and Networking. RIACS has the additional goal of broadening the base of researcher in these areas of importance to the nation's space and aeronautics enterprises. Through its visiting scientist program, RIACS facilitates the participation of university-based researchers, including both faculty and students, in the research activities of NASA and RIACS. RIACS researchers work in close collaboration with NASA computer scientists on projects such as the Remote Agent Experiment on Deep Space One mission, and Super-Resolution Surface Modeling.

  18. On-demand provisioning of HEP compute resources on cloud sites and shared HPC centers

    NASA Astrophysics Data System (ADS)

    Erli, G.; Fischer, F.; Fleig, G.; Giffels, M.; Hauth, T.; Quast, G.; Schnepf, M.; Heese, J.; Leppert, K.; Arnaez de Pedro, J.; Sträter, R.

    2017-10-01

    This contribution reports on solutions, experiences and recent developments with the dynamic, on-demand provisioning of remote computing resources for analysis and simulation workflows. Local resources of a physics institute are extended by private and commercial cloud sites, ranging from the inclusion of desktop clusters over institute clusters to HPC centers. Rather than relying on dedicated HEP computing centers, it is nowadays more reasonable and flexible to utilize remote computing capacity via virtualization techniques or container concepts. We report on recent experience from incorporating a remote HPC center (NEMO Cluster, Freiburg University) and resources dynamically requested from the commercial provider 1&1 Internet SE into our intitute’s computing infrastructure. The Freiburg HPC resources are requested via the standard batch system, allowing HPC and HEP applications to be executed simultaneously, such that regular batch jobs run side by side to virtual machines managed via OpenStack [1]. For the inclusion of the 1&1 commercial resources, a Python API and SDK as well as the possibility to upload images were available. Large scale tests prove the capability to serve the scientific use case in the European 1&1 datacenters. The described environment at the Institute of Experimental Nuclear Physics (IEKP) at KIT serves the needs of researchers participating in the CMS and Belle II experiments. In total, resources exceeding half a million CPU hours have been provided by remote sites.

  19. White paper: A plan for cooperation between NASA and DARPA to establish a center for advanced architectures

    NASA Technical Reports Server (NTRS)

    Denning, P. J.; Adams, G. B., III; Brown, R. L.; Kanerva, P.; Leiner, B. M.; Raugh, M. R.

    1986-01-01

    Large, complex computer systems require many years of development. It is recognized that large scale systems are unlikely to be delivered in useful condition unless users are intimately involved throughout the design process. A mechanism is described that will involve users in the design of advanced computing systems and will accelerate the insertion of new systems into scientific research. This mechanism is embodied in a facility called the Center for Advanced Architectures (CAA). CAA would be a division of RIACS (Research Institute for Advanced Computer Science) and would receive its technical direction from a Scientific Advisory Board established by RIACS. The CAA described here is a possible implementation of a center envisaged in a proposed cooperation between NASA and DARPA.

  20. Bayesian Research at the NASA Ames Research Center,Computational Sciences Division

    NASA Technical Reports Server (NTRS)

    Morris, Robin D.

    2003-01-01

    NASA Ames Research Center is one of NASA s oldest centers, having started out as part of the National Advisory Committee on Aeronautics, (NACA). The site, about 40 miles south of San Francisco, still houses many wind tunnels and other aviation related departments. In recent years, with the growing realization that space exploration is heavily dependent on computing and data analysis, its focus has turned more towards Information Technology. The Computational Sciences Division has expanded rapidly as a result. In this article, I will give a brief overview of some of the past and present projects with a Bayesian content. Much more than is described here goes on with the Division. The web pages at http://ic.arc. nasa.gov give more information on these, and the other Division projects.

  1. Cyber Security: Big Data Think II Working Group Meeting

    NASA Technical Reports Server (NTRS)

    Hinke, Thomas; Shaw, Derek

    2015-01-01

    This presentation focuses on approaches that could be used by a data computation center to identify attacks and ensure malicious code and backdoors are identified if planted in system. The goal is to identify actionable security information from the mountain of data that flows into and out of an organization. The approaches are applicable to big data computational center and some must also use big data techniques to extract the actionable security information from the mountain of data that flows into and out of a data computational center. The briefing covers the detection of malicious delivery sites and techniques for reducing the mountain of data so that intrusion detection information can be useful, and not hidden in a plethora of false alerts. It also looks at the identification of possible unauthorized data exfiltration.

  2. Postdoctoral Fellow | Center for Cancer Research

    Cancer.gov

    The Neuro-Oncology Branch (NOB), Center for Cancer Research (CCR), National Cancer Institute (NCI) of the National Institutes of Health (NIH) is seeking outstanding postdoctoral candidates interested in studying metabolic and cell signaling pathways in the context of brain cancers through construction of computational models amenable to formal computational analysis and simulation. The ability to closely collaborate with the modern metabolomics center developed at CCR provides a unique opportunity for a postdoctoral candidate with a strong theoretical background and interest in demonstrating the incredible potential of computational approaches to solve problems from scientific disciplines and improve lives. The candidate will be given the opportunity to both construct data-driven models, as well as biologically validate the models by demonstrating the ability to predict the effects of altering tumor metabolism in laboratory and clinical settings.

  3. Tools for Analyzing Computing Resource Management Strategies and Algorithms for SDR Clouds

    NASA Astrophysics Data System (ADS)

    Marojevic, Vuk; Gomez-Miguelez, Ismael; Gelonch, Antoni

    2012-09-01

    Software defined radio (SDR) clouds centralize the computing resources of base stations. The computing resource pool is shared between radio operators and dynamically loads and unloads digital signal processing chains for providing wireless communications services on demand. Each new user session request particularly requires the allocation of computing resources for executing the corresponding SDR transceivers. The huge amount of computing resources of SDR cloud data centers and the numerous session requests at certain hours of a day require an efficient computing resource management. We propose a hierarchical approach, where the data center is divided in clusters that are managed in a distributed way. This paper presents a set of computing resource management tools for analyzing computing resource management strategies and algorithms for SDR clouds. We use the tools for evaluating a different strategies and algorithms. The results show that more sophisticated algorithms can achieve higher resource occupations and that a tradeoff exists between cluster size and algorithm complexity.

  4. Argonne Out Loud: Computation, Big Data, and the Future of Cities

    ScienceCinema

    Catlett, Charlie

    2018-01-16

    Charlie Catlett, a Senior Computer Scientist at Argonne and Director of the Urban Center for Computation and Data at the Computation Institute of the University of Chicago and Argonne, talks about how he and his colleagues are using high-performance computing, data analytics, and embedded systems to better understand and design cities.

  5. LaRC local area networks to support distributed computing

    NASA Technical Reports Server (NTRS)

    Riddle, E. P.

    1984-01-01

    The Langley Research Center's (LaRC) Local Area Network (LAN) effort is discussed. LaRC initiated the development of a LAN to support a growing distributed computing environment at the Center. The purpose of the network is to provide an improved capability (over inteactive and RJE terminal access) for sharing multivendor computer resources. Specifically, the network will provide a data highway for the transfer of files between mainframe computers, minicomputers, work stations, and personal computers. An important influence on the overall network design was the vital need of LaRC researchers to efficiently utilize the large CDC mainframe computers in the central scientific computing facility. Although there was a steady migration from a centralized to a distributed computing environment at LaRC in recent years, the work load on the central resources increased. Major emphasis in the network design was on communication with the central resources within the distributed environment. The network to be implemented will allow researchers to utilize the central resources, distributed minicomputers, work stations, and personal computers to obtain the proper level of computing power to efficiently perform their jobs.

  6. CILT2000: Ubiquitous Computing--Spanning the Digital Divide.

    ERIC Educational Resources Information Center

    Tinker, Robert; Vahey, Philip

    2002-01-01

    Discusses the role of ubiquitous and handheld computers in education. Summarizes the contributions of the Center for Innovative Learning Technologies (CILT) and describes the ubiquitous computing sessions at the CILT2000 Conference. (Author/YDS)

  7. ComputerTown: A Do-It-Yourself Community Computer Project. [Computer Town, USA and Other Microcomputer Based Alternatives to Traditional Learning Environments].

    ERIC Educational Resources Information Center

    Zamora, Ramon M.

    Alternative learning environments offering computer-related instruction are developing around the world. Storefront learning centers, museum-based computer facilities, and special theme parks are some of the new concepts. ComputerTown, USA! is a public access computer literacy project begun in 1979 to serve both adults and children in Menlo Park…

  8. Computer Center/DP Management. Papers Presented at the Association for Educational Data Systems Annual Convention (Phoenix, Arizona, May 3-7, 1976).

    ERIC Educational Resources Information Center

    Association for Educational Data Systems, Washington, DC.

    Fifteen papers on computer centers and data processing management presented at the Association for Educational Data Systems (AEDS) 1976 convention are included in this document. The first two papers review the recent controversy for proposed licensing of data processors, and they are followed by a description of the Institute for Certification of…

  9. 37. Photograph of plan for repairs to computer room, 1958, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. Photograph of plan for repairs to computer room, 1958, prepared by the Public Works Office, Underwater Sound Laboratory. Drawing on file at Caretaker Site Office, Naval Undersea Warfare Center, New London. Copyright-free. - Naval Undersea Warfare Center, Bowditch Hall, 600 feet east of Smith Street & 350 feet south of Columbia Cove, West bank of Thames River, New London, New London County, CT

  10. Ethics, Identity, and Political Vision: Toward a Justice-Centered Approach to Equity in Computer Science Education

    ERIC Educational Resources Information Center

    Vakil, Sepehr

    2018-01-01

    In this essay, Sepehr Vakil argues that a more serious engagement with critical traditions in education research is necessary to achieve a justice-centered approach to equity in computer science (CS) education. With CS rapidly emerging as a distinct feature of K-12 public education in the United States, calls to expand CS education are often…

  11. Investigating Impact Metrics for Performance for the US EPA National Center for Computational Toxicology (ACS Fall meeting)

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) Computational Toxicology Program integrates advances in biology, chemistry, and computer science to help prioritize chemicals for further research based on potential human health risks. This work involves computational and data drive...

  12. CHIRAL--A Computer Aided Application of the Cahn-Ingold-Prelog Rules.

    ERIC Educational Resources Information Center

    Meyer, Edgar F., Jr.

    1978-01-01

    A computer program is described for identification of chiral centers in molecules. Essential input to the program includes both atomic and bonding information. The program does not require computer graphic input-output. (BB)

  13. Facilities | Integrated Energy Solutions | NREL

    Science.gov Websites

    strategies needed to optimize our entire energy system. A photo of the high-performance computer at NREL . High-Performance Computing Data Center High-performance computing facilities at NREL provide high-speed

  14. Computers and Technological Forecasting

    ERIC Educational Resources Information Center

    Martino, Joseph P.

    1971-01-01

    Forecasting is becoming increasingly automated, thanks in large measure to the computer. It is now possible for a forecaster to submit his data to a computation center and call for the appropriate program. (No knowledge of statistics is required.) (Author)

  15. Applied Computational Fluid Dynamics at NASA Ames Research Center

    NASA Technical Reports Server (NTRS)

    Holst, Terry L.; Kwak, Dochan (Technical Monitor)

    1994-01-01

    The field of Computational Fluid Dynamics (CFD) has advanced to the point where it can now be used for many applications in fluid mechanics research and aerospace vehicle design. A few applications being explored at NASA Ames Research Center will be presented and discussed. The examples presented will range in speed from hypersonic to low speed incompressible flow applications. Most of the results will be from numerical solutions of the Navier-Stokes or Euler equations in three space dimensions for general geometry applications. Computational results will be used to highlight the presentation as appropriate. Advances in computational facilities including those associated with NASA's CAS (Computational Aerosciences) Project of the Federal HPCC (High Performance Computing and Communications) Program will be discussed. Finally, opportunities for future research will be presented and discussed. All material will be taken from non-sensitive, previously-published and widely-disseminated work.

  16. A resource-sharing model based on a repeated game in fog computing.

    PubMed

    Sun, Yan; Zhang, Nan

    2017-03-01

    With the rapid development of cloud computing techniques, the number of users is undergoing exponential growth. It is difficult for traditional data centers to perform many tasks in real time because of the limited bandwidth of resources. The concept of fog computing is proposed to support traditional cloud computing and to provide cloud services. In fog computing, the resource pool is composed of sporadic distributed resources that are more flexible and movable than a traditional data center. In this paper, we propose a fog computing structure and present a crowd-funding algorithm to integrate spare resources in the network. Furthermore, to encourage more resource owners to share their resources with the resource pool and to supervise the resource supporters as they actively perform their tasks, we propose an incentive mechanism in our algorithm. Simulation results show that our proposed incentive mechanism can effectively reduce the SLA violation rate and accelerate the completion of tasks.

  17. Design of a robotic vehicle with self-contained intelligent wheels

    NASA Astrophysics Data System (ADS)

    Poulson, Eric A.; Jacob, John S.; Gunderson, Robert W.; Abbott, Ben A.

    1998-08-01

    The Center for Intelligent Systems has developed a small robotic vehicle named the Advanced Rover Chassis 3 (ARC 3) with six identical intelligent wheel units attached to a payload via a passive linkage suspension system. All wheels are steerable, so the ARC 3 can move in any direction while rotating at any rate allowed by the terrain and motors. Each intelligent wheel unit contains a drive motor, steering motor, batteries, and computer. All wheel units are identical, so manufacturing, programing, and spare replacement are greatly simplified. The intelligent wheel concept would allow the number and placement of wheels on the vehicle to be changed with no changes to the control system, except to list the position of all the wheels relative to the vehicle center. The task of controlling the ARC 3 is distributed between one master computer and the wheel computers. Tasks such as controlling the steering motors and calculating the speed of each wheel relative to the vehicle speed in a corner are dependent on the location of a wheel relative to the vehicle center and ar processed by the wheel computers. Conflicts between the wheels are eliminated by computing the vehicle velocity control in the master computer. Various approaches to this distributed control problem, and various low level control methods, have been explored.

  18. Berkeley Lab - Materials Sciences Division

    Science.gov Websites

    Computational Study of Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion Facilities and Centers Staff Center for X-ray Optics Patrick Naulleau Director 510-486-4529 2-432 PNaulleau

  19. Parallel neural pathways in higher visual centers of the Drosophila brain that mediate wavelength-specific behavior

    PubMed Central

    Otsuna, Hideo; Shinomiya, Kazunori; Ito, Kei

    2014-01-01

    Compared with connections between the retinae and primary visual centers, relatively less is known in both mammals and insects about the functional segregation of neural pathways connecting primary and higher centers of the visual processing cascade. Here, using the Drosophila visual system as a model, we demonstrate two levels of parallel computation in the pathways that connect primary visual centers of the optic lobe to computational circuits embedded within deeper centers in the central brain. We show that a seemingly simple achromatic behavior, namely phototaxis, is under the control of several independent pathways, each of which is responsible for navigation towards unique wavelengths. Silencing just one pathway is enough to disturb phototaxis towards one characteristic monochromatic source, whereas phototactic behavior towards white light is not affected. The response spectrum of each demonstrable pathway is different from that of individual photoreceptors, suggesting subtractive computations. A choice assay between two colors showed that these pathways are responsible for navigation towards, but not for the detection itself of, the monochromatic light. The present study provides novel insights about how visual information is separated and processed in parallel to achieve robust control of an innate behavior. PMID:24574974

  20. Current state and future direction of computer systems at NASA Langley Research Center

    NASA Technical Reports Server (NTRS)

    Rogers, James L. (Editor); Tucker, Jerry H. (Editor)

    1992-01-01

    Computer systems have advanced at a rate unmatched by any other area of technology. As performance has dramatically increased there has been an equally dramatic reduction in cost. This constant cost performance improvement has precipitated the pervasiveness of computer systems into virtually all areas of technology. This improvement is due primarily to advances in microelectronics. Most people are now convinced that the new generation of supercomputers will be built using a large number (possibly thousands) of high performance microprocessors. Although the spectacular improvements in computer systems have come about because of these hardware advances, there has also been a steady improvement in software techniques. In an effort to understand how these hardware and software advances will effect research at NASA LaRC, the Computer Systems Technical Committee drafted this white paper to examine the current state and possible future directions of computer systems at the Center. This paper discusses selected important areas of computer systems including real-time systems, embedded systems, high performance computing, distributed computing networks, data acquisition systems, artificial intelligence, and visualization.

  1. Future of Department of Defense Cloud Computing Amid Cultural Confusion

    DTIC Science & Technology

    2013-03-01

    enterprise cloud - computing environment and transition to a public cloud service provider. Services have started the development of individual cloud - computing environments...endorsing cloud computing . It addresses related issues in matters of service culture changes and how strategic leaders will dictate the future of cloud ...through data center consolidation and individual Service provided cloud computing .

  2. Computer Needs and Computer Problems in Developing Countries.

    ERIC Educational Resources Information Center

    Huskey, Harry D.

    A survey of the computer environment in a developing country is provided. Levels of development are considered and the educational requirements of countries at various levels are discussed. Computer activities in India, Burma, Pakistan, Brazil and a United Nations sponsored educational center in Hungary are all described. (SK/Author)

  3. Computer Viruses. Legal and Policy Issues Facing Colleges and Universities.

    ERIC Educational Resources Information Center

    Johnson, David R.; And Others

    Compiled by various members of the higher educational community together with risk managers, computer center managers, and computer industry experts, this report recommends establishing policies on an institutional level to protect colleges and universities from computer viruses and the accompanying liability. Various aspects of the topic are…

  4. PACCE: Perl Algorithm to Compute Continuum and Equivalent Widths

    NASA Astrophysics Data System (ADS)

    Riffel, Rogério; Borges Vale, Tibério

    2011-05-01

    PACCE (Perl Algorithm to Compute continuum and Equivalent Widths) computes continuum and equivalent widths. PACCE is able to determine mean continuum and continuum at line center values, which are helpful in stellar population studies, and is also able to compute the uncertainties in the equivalent widths using photon statistics.

  5. Delivering an Informational Hub for Data at the National Center for Computational Toxicology (ACS Spring Meeting) 7 of 7

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) Computational Toxicology Program integrates advances in biology, chemistry, and computer science to help prioritize chemicals for further research based on potential human health risks. This work involves computational and data drive...

  6. 76 FR 1410 - Privacy Act of 1974; Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-10

    ...; Computer Matching Program AGENCY: Defense Manpower Data Center (DMDC), DoD. ACTION: Notice of a Computer... administrative burden, constitute a greater intrusion of the individual's privacy, and would result in additional... Liaison Officer, Department of Defense. Notice of a Computer Matching Program Among the Defense Manpower...

  7. Computers, Networks, and Desegregation at San Jose High Academy.

    ERIC Educational Resources Information Center

    Solomon, Gwen

    1987-01-01

    Describes magnet high school which was created in California to meet desegregation requirements and emphasizes computer technology. Highlights include local computer networks that connect science and music labs, the library/media center, business computer lab, writing lab, language arts skills lab, and social studies classrooms; software; teacher…

  8. The Effect of Computer Automation on Institutional Review Board (IRB) Office Efficiency

    ERIC Educational Resources Information Center

    Oder, Karl; Pittman, Stephanie

    2015-01-01

    Companies purchase computer systems to make their processes more efficient through automation. Some academic medical centers (AMC) have purchased computer systems for their institutional review boards (IRB) to increase efficiency and compliance with regulations. IRB computer systems are expensive to purchase, deploy, and maintain. An AMC should…

  9. Manual on characteristics of Landsat computer-compatible tapes produced by the EROS Data Center digital image processing system

    USGS Publications Warehouse

    Holkenbrink, Patrick F.

    1978-01-01

    Landsat data are received by National Aeronautics and Space Administration (NASA) tracking stations and converted into digital form on high-density tapes (HDTs) by the Image Processing Facility (IPF) at the Goddard Space Flight Center (GSFC), Greenbelt, Maryland. The HDTs are shipped to the EROS Data Center (EDC) where they are converted into customer products by the EROS Data Center digital image processing system (EDIPS). This document describes in detail one of these products: the computer-compatible tape (CCT) produced from Landsat-1, -2, and -3 multispectral scanner (MSS) data and Landsat-3 only return-beam vidicon (RBV) data. Landsat-1 and -2 RBV data will not be processed by IPF/EDIPS to CCT format.

  10. Computer modeling with randomized-controlled trial data informs the development of person-centered aged care homes.

    PubMed

    Chenoweth, Lynn; Vickland, Victor; Stein-Parbury, Jane; Jeon, Yun-Hee; Kenny, Patricia; Brodaty, Henry

    2015-10-01

    To answer questions on the essential components (services, operations and resources) of a person-centered aged care home (iHome) using computer simulation. iHome was developed with AnyLogic software using extant study data obtained from 60 Australian aged care homes, 900+ clients and 700+ aged care staff. Bayesian analysis of simulated trial data will determine the influence of different iHome characteristics on care service quality and client outcomes. Interim results: A person-centered aged care home (socio-cultural context) and care/lifestyle services (interactional environment) can produce positive outcomes for aged care clients (subjective experiences) in the simulated environment. Further testing will define essential characteristics of a person-centered care home.

  11. 77 FR 38630 - Open Internet Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-28

    ... Computer Science and Co-Founder of the Berkman Center for Internet and Society, Harvard University, is... of Technology Computer Science and Artificial Intelligence Laboratory, is appointed vice-chairperson... Jennifer Rexford, Professor of Computer Science, Princeton University Dennis Roberson, Vice Provost...

  12. Exposure Science and the US EPA National Center for Computational Toxicology

    EPA Science Inventory

    The emerging field of computational toxicology applies mathematical and computer models and molecular biological and chemical approaches to explore both qualitative and quantitative relationships between sources of environmental pollutant exposure and adverse health outcomes. The...

  13. Storage and network bandwidth requirements through the year 2000 for the NASA Center for Computational Sciences

    NASA Technical Reports Server (NTRS)

    Salmon, Ellen

    1996-01-01

    The data storage and retrieval demands of space and Earth sciences researchers have made the NASA Center for Computational Sciences (NCCS) Mass Data Storage and Delivery System (MDSDS) one of the world's most active Convex UniTree systems. Science researchers formed the NCCS's Computer Environments and Research Requirements Committee (CERRC) to relate their projected supercomputing and mass storage requirements through the year 2000. Using the CERRC guidelines and observations of current usage, some detailed projections of requirements for MDSDS network bandwidth and mass storage capacity and performance are presented.

  14. TOSCA calculations and measurements for the SLAC SLC damping ring dipole magnet

    NASA Astrophysics Data System (ADS)

    Early, R. A.; Cobb, J. K.

    1985-04-01

    The SLAC damping ring dipole magnet was originally designed with removable nose pieces at the ends. Recently, a set of magnetic measurements was taken of the vertical component of induction along the center of the magnet for four different pole-end configurations and several current settings. The three dimensional computer code TOSCA, which is currently installed on the National Magnetic Fusion Energy Computer Center's Cray X-MP, was used to compute field values for the four configurations at current settings near saturation. Comparisons were made for magnetic induction as well as effective magnetic lengths for the different configurations.

  15. 1999 NCCS Highlights

    NASA Technical Reports Server (NTRS)

    Bennett, Jerome (Technical Monitor)

    2002-01-01

    The NASA Center for Computational Sciences (NCCS) is a high-performance scientific computing facility operated, maintained and managed by the Earth and Space Data Computing Division (ESDCD) of NASA Goddard Space Flight Center's (GSFC) Earth Sciences Directorate. The mission of the NCCS is to advance leading-edge science by providing the best people, computers, and data storage systems to NASA's Earth and space sciences programs and those of other U.S. Government agencies, universities, and private institutions. Among the many computationally demanding Earth science research efforts supported by the NCCS in Fiscal Year 1999 (FY99) are the NASA Seasonal-to-Interannual Prediction Project, the NASA Search and Rescue Mission, Earth gravitational model development efforts, the National Weather Service's North American Observing System program, Data Assimilation Office studies, a NASA-sponsored project at the Center for Ocean-Land-Atmosphere Studies, a NASA-sponsored microgravity project conducted by researchers at the City University of New York and the University of Pennsylvania, the completion of a satellite-derived global climate data set, simulations of a new geodynamo model, and studies of Earth's torque. This document presents highlights of these research efforts and an overview of the NCCS, its facilities, and its people.

  16. CMSA: a heterogeneous CPU/GPU computing system for multiple similar RNA/DNA sequence alignment.

    PubMed

    Chen, Xi; Wang, Chen; Tang, Shanjiang; Yu, Ce; Zou, Quan

    2017-06-24

    The multiple sequence alignment (MSA) is a classic and powerful technique for sequence analysis in bioinformatics. With the rapid growth of biological datasets, MSA parallelization becomes necessary to keep its running time in an acceptable level. Although there are a lot of work on MSA problems, their approaches are either insufficient or contain some implicit assumptions that limit the generality of usage. First, the information of users' sequences, including the sizes of datasets and the lengths of sequences, can be of arbitrary values and are generally unknown before submitted, which are unfortunately ignored by previous work. Second, the center star strategy is suited for aligning similar sequences. But its first stage, center sequence selection, is highly time-consuming and requires further optimization. Moreover, given the heterogeneous CPU/GPU platform, prior studies consider the MSA parallelization on GPU devices only, making the CPUs idle during the computation. Co-run computation, however, can maximize the utilization of the computing resources by enabling the workload computation on both CPU and GPU simultaneously. This paper presents CMSA, a robust and efficient MSA system for large-scale datasets on the heterogeneous CPU/GPU platform. It performs and optimizes multiple sequence alignment automatically for users' submitted sequences without any assumptions. CMSA adopts the co-run computation model so that both CPU and GPU devices are fully utilized. Moreover, CMSA proposes an improved center star strategy that reduces the time complexity of its center sequence selection process from O(mn 2 ) to O(mn). The experimental results show that CMSA achieves an up to 11× speedup and outperforms the state-of-the-art software. CMSA focuses on the multiple similar RNA/DNA sequence alignment and proposes a novel bitmap based algorithm to improve the center star strategy. We can conclude that harvesting the high performance of modern GPU is a promising approach to accelerate multiple sequence alignment. Besides, adopting the co-run computation model can maximize the entire system utilization significantly. The source code is available at https://github.com/wangvsa/CMSA .

  17. UC Merced Center for Computational Biology Final Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Colvin, Michael; Watanabe, Masakatsu

    Final report for the UC Merced Center for Computational Biology. The Center for Computational Biology (CCB) was established to support multidisciplinary scientific research and academic programs in computational biology at the new University of California campus in Merced. In 2003, the growing gap between biology research and education was documented in a report from the National Academy of Sciences, Bio2010 Transforming Undergraduate Education for Future Research Biologists. We believed that a new type of biological sciences undergraduate and graduate programs that emphasized biological concepts and considered biology as an information science would have a dramatic impact in enabling the transformationmore » of biology. UC Merced as newest UC campus and the first new U.S. research university of the 21st century was ideally suited to adopt an alternate strategy - to create a new Biological Sciences majors and graduate group that incorporated the strong computational and mathematical vision articulated in the Bio2010 report. CCB aimed to leverage this strong commitment at UC Merced to develop a new educational program based on the principle of biology as a quantitative, model-driven science. Also we expected that the center would be enable the dissemination of computational biology course materials to other university and feeder institutions, and foster research projects that exemplify a mathematical and computations-based approach to the life sciences. As this report describes, the CCB has been successful in achieving these goals, and multidisciplinary computational biology is now an integral part of UC Merced undergraduate, graduate and research programs in the life sciences. The CCB began in fall 2004 with the aid of an award from U.S. Department of Energy (DOE), under its Genomes to Life program of support for the development of research and educational infrastructure in the modern biological sciences. This report to DOE describes the research and academic programs made possible by the CCB from its inception until August, 2010, at the end of the final extension. Although DOE support for the center ended in August 2010, the CCB will continue to exist and support its original objectives. The research and academic programs fostered by the CCB have led to additional extramural funding from other agencies, and we anticipate that CCB will continue to provide support for quantitative and computational biology program at UC Merced for many years to come. Since its inception in fall 2004, CCB research projects have continuously had a multi-institutional collaboration with Lawrence Livermore National Laboratory (LLNL), and the National Center for Supercomputing Applications at the University of Illinois at Urbana-Champaign, as well as individual collaborators at other sites. CCB affiliated faculty cover a broad range of computational and mathematical research including molecular modeling, cell biology, applied math, evolutional biology, bioinformatics, etc. The CCB sponsored the first distinguished speaker series at UC Merced, which had an important role is spreading the word about the computational biology emphasis at this new campus. One of CCB's original goals is to help train a new generation of biologists who bridge the gap between the computational and life sciences. To archive this goal, by summer 2006, a new program - summer undergraduate internship program, have been established under CCB to train the highly mathematical and computationally intensive Biological Science researchers. By the end of summer 2010, 44 undergraduate students had gone through this program. Out of those participants, 11 students have been admitted to graduate schools and 10 more students are interested in pursuing graduate studies in the sciences. The center is also continuing to facilitate the development and dissemination of undergraduate and graduate course materials based on the latest research in computational biology.« less

  18. Computing Protein-Protein Association Affinity with Hybrid Steered Molecular Dynamics.

    PubMed

    Rodriguez, Roberto A; Yu, Lili; Chen, Liao Y

    2015-09-08

    Computing protein-protein association affinities is one of the fundamental challenges in computational biophysics/biochemistry. The overwhelming amount of statistics in the phase space of very high dimensions cannot be sufficiently sampled even with today's high-performance computing power. In this article, we extend a potential of mean force (PMF)-based approach, the hybrid steered molecular dynamics (hSMD) approach we developed for ligand-protein binding, to protein-protein association problems. For a protein complex consisting of two protomers, P1 and P2, we choose m (≥3) segments of P1 whose m centers of mass are to be steered in a chosen direction and n (≥3) segments of P2 whose n centers of mass are to be steered in the opposite direction. The coordinates of these m + n centers constitute a phase space of 3(m + n) dimensions (3(m + n)D). All other degrees of freedom of the proteins, ligands, solvents, and solutes are freely subject to the stochastic dynamics of the all-atom model system. Conducting SMD along a line in this phase space, we obtain the 3(m + n)D PMF difference between two chosen states: one single state in the associated state ensemble and one single state in the dissociated state ensemble. This PMF difference is the first of four contributors to the protein-protein association energy. The second contributor is the 3(m + n - 1)D partial partition in the associated state accounting for the rotations and fluctuations of the (m + n - 1) centers while fixing one of the m + n centers of the P1-P2 complex. The two other contributors are the 3(m - 1)D partial partition of P1 and the 3(n - 1)D partial partition of P2 accounting for the rotations and fluctuations of their m - 1 or n - 1 centers while fixing one of the m/n centers of P1/P2 in the dissociated state. Each of these three partial partitions can be factored exactly into a 6D partial partition in multiplication with a remaining factor accounting for the small fluctuations while fixing three of the centers of P1, P2, or the P1-P2 complex, respectively. These small fluctuations can be well-approximated as Gaussian, and every 6D partition can be reduced in an exact manner to three problems of 1D sampling, counting the rotations and fluctuations around one of the centers as being fixed. We implement this hSMD approach to the Ras-RalGDS complex, choosing three centers on RalGDS and three on Ras (m = n = 3). At a computing cost of about 71.6 wall-clock hours using 400 computing cores in parallel, we obtained the association energy, -9.2 ± 1.9 kcal/mol on the basis of CHARMM 36 parameters, which well agrees with the experimental data, -8.4 ± 0.2 kcal/mol.

  19. Trip attraction rates of shopping centers in Northern New Castle County, Delaware.

    DOT National Transportation Integrated Search

    2004-07-01

    This report presents the trip attraction rates of the shopping centers in Northern New : Castle County in Delaware. The study aims to provide an alternative to ITE Trip : Generation Manual (1997) for computing the trip attraction of shopping centers ...

  20. NETL - Supercomputing: NETL Simulation Based Engineering User Center (SBEUC)

    ScienceCinema

    None

    2018-02-07

    NETL's Simulation-Based Engineering User Center, or SBEUC, integrates one of the world's largest high-performance computers with an advanced visualization center. The SBEUC offers a collaborative environment among researchers at NETL sites and those working through the NETL-Regional University Alliance.

  1. Computer Bits: Child Care Center Management Software Buying Guide Update.

    ERIC Educational Resources Information Center

    Neugebauer, Roger

    1987-01-01

    Compares seven center management programs used for basic financial and data management tasks such as accounting, payroll and attendance records, and mailing lists. Describes three other specialized programs and gives guidelines for selecting the best software for a particular center. (NH)

  2. NETL - Supercomputing: NETL Simulation Based Engineering User Center (SBEUC)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2013-09-30

    NETL's Simulation-Based Engineering User Center, or SBEUC, integrates one of the world's largest high-performance computers with an advanced visualization center. The SBEUC offers a collaborative environment among researchers at NETL sites and those working through the NETL-Regional University Alliance.

  3. McMillan Magnet School: A Case History of a School Acquiring a Critical Mass of Computer Technology and Internet Connectivity.

    ERIC Educational Resources Information Center

    Grandgenett, Neal; And Others

    McMillan Magnet Center is located in urban Omaha, Nebraska, and specializes in math, computers, and communications. Once a junior high school, it was converted to a magnet center for seventh and eighth graders in the 1983-84 school year as part of Omaha's voluntary desegregation plan. Now the ethnic makeup of the student population is about 50%…

  4. Study of the Use of Time-Mean Vortices to Generate Lift for MAV Applications

    DTIC Science & Technology

    2011-05-31

    microplate to in-plane resonance. Computational effort centers around optimization of a range of parameters (geometry, frequency, amplitude of oscillation, etc...issue involved. Towards this end, a suspended microplate was fabricated via MEMS technology and driven to in-plane resonance via Lorentz force...force to drive the suspended MEMS-based microplate to in-plane resonance. Computational effort centers around optimization of a range of parameters

  5. ICAM (Integrated Computer Aided Manufacturing) Conceptual Design for Computer-Integrated Manufacturing. Volume 1. Project Overview and Technical Summary

    DTIC Science & Technology

    1984-06-29

    sheet metal, machined and composite parts and assembling the components into final pruJucts o Planning, evaluating, testing, inspecting and...Research showed that current programs were pursuing the design and demonstration of integrated centers for sheet metal, machining and composite ...determine any metal parts required and to schedule these requirements from the machining center. Figure 3-33, Planned Composite Production, shows

  6. 3D Object Recognition: Symmetry and Virtual Views

    DTIC Science & Technology

    1992-12-01

    NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATIONI Artificial Intelligence Laboratory REPORT NUMBER 545 Technology Square AIM 1409 Cambridge... ARTIFICIAL INTELLIGENCE LABORATORY and CENTER FOR BIOLOGICAL AND COMPUTATIONAL LEARNING A.I. Memo No. 1409 December 1992 C.B.C.L. Paper No. 76 3D Object...research done within the Center for Biological and Computational Learning in the Department of Brain and Cognitive Sciences, and at the Artificial

  7. [Automated processing of data from the 1985 population and housing census].

    PubMed

    Cholakov, S

    1987-01-01

    The author describes the method of automated data processing used in the 1985 census of Bulgaria. He notes that the computerization of the census involves decentralization and the use of regional computing centers as well as data processing at the Central Statistical Office's National Information Computer Center. Special attention is given to problems concerning the projection and programming of census data. (SUMMARY IN ENG AND RUS)

  8. Ames Research Center Publications: A Continuing Bibliography

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The Ames Research Center Publications: A Continuing Bibliography contains the research output of the Center indexed during 1981 in Scientific and Technical Aerospace Reports (STAR), Limited Scientific and Technical Aerospace Reports (LSTAR), International Aerospace Abstracts (IAA), and Computer Program Abstracts (CPA). This bibliography is published annually in an attempt to effect greater awareness and distribution of the Center's research output.

  9. Handling of Varied Data Bases in an Information Center Environment.

    ERIC Educational Resources Information Center

    Williams, Martha E.

    Information centers exist to provide information from machine-readable data bases to users in industry, universities and other organizations. The computer Search Center of the IIT Research Institute was designed with a number of variables and uncertainties before it. In this paper, the author discusses how the Center was designed to enable it to…

  10. 76 FR 59803 - Children's Online Privacy Protection Rule

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-27

    ...,'' covering the ``myriad of computer and telecommunications facilities, including equipment and operating..., Dir. and Professor of Computer Sci. and Pub. Affairs, Princeton Univ. (currently Chief Technologist at... data in the manner of a personal computer. See Electronic Privacy Information Center (``EPIC...

  11. System and method for transferring telemetry data between a ground station and a control center

    NASA Technical Reports Server (NTRS)

    Ray, Timothy J. (Inventor); Ly, Vuong T. (Inventor)

    2012-01-01

    Disclosed herein are systems, computer-implemented methods, and tangible computer-readable media for coordinating communications between a ground station, a control center, and a spacecraft. The method receives a call to a simple, unified application programmer interface implementing communications protocols related to outer space, when instruction relates to receiving a command at the control center for the ground station generate an abstract message by agreeing upon a format for each type of abstract message with the ground station and using a set of message definitions to configure the command in the agreed upon format, encode the abstract message to generate an encoded message, and transfer the encoded message to the ground station, and perform similar actions when the instruction relates to receiving a second command as a second encoded message at the ground station from the control center and when the determined instruction type relates to transmitting information to the control center.

  12. Quantum computing with defects.

    PubMed

    Weber, J R; Koehl, W F; Varley, J B; Janotti, A; Buckley, B B; Van de Walle, C G; Awschalom, D D

    2010-05-11

    Identifying and designing physical systems for use as qubits, the basic units of quantum information, are critical steps in the development of a quantum computer. Among the possibilities in the solid state, a defect in diamond known as the nitrogen-vacancy (NV(-1)) center stands out for its robustness--its quantum state can be initialized, manipulated, and measured with high fidelity at room temperature. Here we describe how to systematically identify other deep center defects with similar quantum-mechanical properties. We present a list of physical criteria that these centers and their hosts should meet and explain how these requirements can be used in conjunction with electronic structure theory to intelligently sort through candidate defect systems. To illustrate these points in detail, we compare electronic structure calculations of the NV(-1) center in diamond with those of several deep centers in 4H silicon carbide (SiC). We then discuss the proposed criteria for similar defects in other tetrahedrally coordinated semiconductors.

  13. High Performance Computing Meets Energy Efficiency - Continuum Magazine |

    Science.gov Websites

    NREL High Performance Computing Meets Energy Efficiency High Performance Computing Meets Energy turbines. Simulation by Patrick J. Moriarty and Matthew J. Churchfield, NREL The new High Performance Computing Data Center at the National Renewable Energy Laboratory (NREL) hosts high-speed, high-volume data

  14. Examining the Feasibility and Effect of Transitioning GED Tests to Computer

    ERIC Educational Resources Information Center

    Higgins, Jennifer; Patterson, Margaret Becker; Bozman, Martha; Katz, Michael

    2010-01-01

    This study examined the feasibility of administering GED Tests using a computer based testing system with embedded accessibility tools and the impact on test scores and test-taker experience when GED Tests are transitioned from paper to computer. Nineteen test centers across five states successfully installed the computer based testing program,…

  15. 75 FR 8311 - Privacy Act of 1974; Notice of a Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-24

    ...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, DoD. ACTION: Notice of a... hereby giving notice to the record subjects of a computer matching program between the Department of... conduct a computer matching program between the agencies. The purpose of this agreement is to verify an...

  16. Employment Trends in Computer Occupations. Bulletin 2101.

    ERIC Educational Resources Information Center

    Howard, H. Philip; Rothstein, Debra E.

    In 1980 1,455,000 persons worked in computer occupations. Two in five were systems analysts or programmers; one in five was a keypunch operator; one in 20 was a computer service technician; and more than one in three were computer and peripheral equipment operators. Employment was concentrated in major urban centers in four major industry…

  17. Webinar: Delivering Transformational HPC Solutions to Industry

    ScienceCinema

    Streitz, Frederick

    2018-01-16

    Dr. Frederick Streitz, director of the High Performance Computing Innovation Center, discusses Lawrence Livermore National Laboratory computational capabilities and expertise available to industry in this webinar.

  18. Ames Research Center publications: A continuing bibliography, 1980

    NASA Technical Reports Server (NTRS)

    1981-01-01

    This bibliography lists formal NASA publications, journal articles, books, chapters of books, patents, contractor reports, and computer programs that were issued by Ames Research Center and indexed by Scientific and Technical Aerospace Reports, Limited Scientific and Technical Aerospace Reports, International Aerospace Abstracts, and Computer Program Abstracts in 1980. Citations are arranged by directorate, type of publication, and NASA accession numbers. Subject, personal author, corporate source, contract number, and report/accession number indexes are provided.

  19. A Winning Cast

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Howmet Research Corporation was the first to commercialize an innovative cast metal technology developed at Auburn University, Auburn, Alabama. With funding assistance from NASA's Marshall Space Flight Center, Auburn University's Solidification Design Center (a NASA Commercial Space Center), developed accurate nickel-based superalloy data for casting molten metals. Through a contract agreement, Howmet used the data to develop computer model predictions of molten metals and molding materials in cast metal manufacturing. Howmet Metal Mold (HMM), part of Howmet Corporation Specialty Products, of Whitehall, Michigan, utilizes metal molds to manufacture net shape castings in various alloys and amorphous metal (metallic glass). By implementing the thermophysical property data from by Auburn researchers, Howmet employs its newly developed computer model predictions to offer customers high-quality, low-cost, products with significantly improved mechanical properties. Components fabricated with this new process replace components originally made from forgings or billet. Compared with products manufactured through traditional casting methods, Howmet's computer-modeled castings come out on top.

  20. Touch-screen computerized education for patients with brain injuries.

    PubMed

    Patyk, M; Gaynor, S; Kelly, J; Ott, V

    1998-01-01

    The use of computer technology for patient education has increased in recent years. This article describes a study that measures the attitudes and perceptions of healthcare professionals and laypeople regarding the effectiveness of a multimedia computer, the Brain Injury Resource Center (BIRC), as an educational tool. The study focused on three major themes: (a) usefulness of the information presented, (b) effectiveness of the multimedia touch-screen computer methodology, and (c) the appropriate time for making this resource available. This prospective study, conducted in an acute care medical center, obtained healthcare professionals' evaluations using a written survey and responses from patients with brain injury and their families during interviews. The findings have yielded excellent ratings as to the ease of understanding and usefulness of the BIRC. By using sight, sound, and touch, such a multimedia learning center has the potential to simplify patient and family education.

  1. Institute for Computational Mechanics in Propulsion (ICOMP)

    NASA Technical Reports Server (NTRS)

    Feiler, Charles E. (Compiler)

    1993-01-01

    The Institute for Computational Mechanics in Propulsion (ICOMP) was established at the NASA Lewis Research Center in Cleveland, Ohio to develop techniques to improve problem-solving capabilities in all aspects of computational mechanics related to propulsion. The activities at ICOMP during 1992 are described.

  2. Best Practice Guidelines for Computer Technology in the Montessori Early Childhood Classroom.

    ERIC Educational Resources Information Center

    Montminy, Peter

    1999-01-01

    Presents a draft for a principle-centered position statement of a Montessori early childhood program in central Pennsylvania, on the pros and cons of computer use in a Montessori 3-6 classroom. Includes computer software rating form. (Author/KB)

  3. Computer Center: It's Time to Take Inventory.

    ERIC Educational Resources Information Center

    Spain, James D.

    1984-01-01

    Describes typical instructional applications of computers. Areas considered include: (1) instructional simulations and animations; (2) data analysis; (3) drill and practice; (4) student evaluation; (5) development of computer models and simulations; (6) biometrics or biostatistics; and (7) direct data acquisition and analysis. (JN)

  4. Center for Computational Structures Technology

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K.; Perry, Ferman W.

    1995-01-01

    The Center for Computational Structures Technology (CST) is intended to serve as a focal point for the diverse CST research activities. The CST activities include the use of numerical simulation and artificial intelligence methods in modeling, analysis, sensitivity studies, and optimization of flight-vehicle structures. The Center is located at NASA Langley and is an integral part of the School of Engineering and Applied Science of the University of Virginia. The key elements of the Center are: (1) conducting innovative research on advanced topics of CST; (2) acting as pathfinder by demonstrating to the research community what can be done (high-potential, high-risk research); (3) strong collaboration with NASA scientists and researchers from universities and other government laboratories; and (4) rapid dissemination of CST to industry, through integration of industrial personnel into the ongoing research efforts.

  5. NASA Space Engineering Research Center for VLSI systems design

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

  6. A Comprehensive Computer Package for Ambulatory Surgical Facilities

    PubMed Central

    Kessler, Robert R.

    1980-01-01

    Ambulatory surgical centers are a cost effective alternative to hospital surgery. Their increasing popularity has contributed to heavy case loads, an accumulation of vast amounts of medical and financial data and economic pressures to maintain a tight control over “cash flow”. Computerization is now a necessity to aid ambulatory surgical centers to maintain their competitive edge. An on-line system is especially necessary as it allows interactive scheduling of surgical cases, immediate access to financial data and rapid gathering of medical and statistical information. This paper describes the significant features of the computer package in use at the Salt Lake Surgical Center, which processes 500 cases per month.

  7. Integration of the Chinese HPC Grid in ATLAS Distributed Computing

    NASA Astrophysics Data System (ADS)

    Filipčič, A.; ATLAS Collaboration

    2017-10-01

    Fifteen Chinese High-Performance Computing sites, many of them on the TOP500 list of most powerful supercomputers, are integrated into a common infrastructure providing coherent access to a user through an interface based on a RESTful interface called SCEAPI. These resources have been integrated into the ATLAS Grid production system using a bridge between ATLAS and SCEAPI which translates the authorization and job submission protocols between the two environments. The ARC Computing Element (ARC-CE) forms the bridge using an extended batch system interface to allow job submission to SCEAPI. The ARC-CE was setup at the Institute for High Energy Physics, Beijing, in order to be as close as possible to the SCEAPI front-end interface at the Computing Network Information Center, also in Beijing. This paper describes the technical details of the integration between ARC-CE and SCEAPI and presents results so far with two supercomputer centers, Tianhe-IA and ERA. These two centers have been the pilots for ATLAS Monte Carlo Simulation in SCEAPI and have been providing CPU power since fall 2015.

  8. New frontiers in design synthesis

    NASA Technical Reports Server (NTRS)

    Goldin, D. S.; Venneri, S. L.; Noor, A. K.

    1999-01-01

    The Intelligent Synthesis Environment (ISE), which is one of the major strategic technologies under development at NASA centers and the University of Virginia, is described. One of the major objectives of ISE is to significantly enhance the rapid creation of innovative affordable products and missions. ISE uses a synergistic combination of leading-edge technologies, including high performance computing, high capacity communications and networking, human-centered computing, knowledge-based engineering, computational intelligence, virtual product development, and product information management. The environment will link scientists, design teams, manufacturers, suppliers, and consultants who participate in the mission synthesis as well as in the creation and operation of the aerospace system. It will radically advance the process by which complex science missions are synthesized, and high-tech engineering Systems are designed, manufactured and operated. The five major components critical to ISE are human-centered computing, infrastructure for distributed collaboration, rapid synthesis and simulation tools, life cycle integration and validation, and cultural change in both the engineering and science creative process. The five components and their subelements are described. Related U.S. government programs are outlined and the future impact of ISE on engineering research and education is discussed.

  9. Networking at NASA. Johnson Space Center

    NASA Technical Reports Server (NTRS)

    Garman, John R.

    1991-01-01

    A series of viewgraphs on computer networks at the Johnson Space Center (JSC) are given. Topics covered include information resource management (IRM) at JSC, the IRM budget by NASA center, networks evolution, networking as a strategic tool, the Information Services Directorate charter, and SSC network requirements, challenges, and status.

  10. Steve Hammond | NREL

    Science.gov Websites

    Hammond Photo of Steven Hammond Steve Hammond Center Director II-Technical Steven.Hammond@nrel.gov | 303-275-4121 Steve Hammond is director of the Computational Science Center at the National Renewable includes leading NREL's efforts in energy efficient data centers. Prior to NREL, Steve managed the

  11. Guidelines for development of NASA (National Aeronautics and Space Administration) computer security training programs

    NASA Technical Reports Server (NTRS)

    Tompkins, F. G.

    1983-01-01

    The report presents guidance for the NASA Computer Security Program Manager and the NASA Center Computer Security Officials as they develop training requirements and implement computer security training programs. NASA audiences are categorized based on the computer security knowledge required to accomplish identified job functions. Training requirements, in terms of training subject areas, are presented for both computer security program management personnel and computer resource providers and users. Sources of computer security training are identified.

  12. Center for Aeronautics and Space Information Sciences

    NASA Technical Reports Server (NTRS)

    Flynn, Michael J.

    1992-01-01

    This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets.

  13. Accelerating MP2C dispersion corrections for dimers and molecular crystals

    NASA Astrophysics Data System (ADS)

    Huang, Yuanhang; Shao, Yihan; Beran, Gregory J. O.

    2013-06-01

    The MP2C dispersion correction of Pitonak and Hesselmann [J. Chem. Theory Comput. 6, 168 (2010)], 10.1021/ct9005882 substantially improves the performance of second-order Møller-Plesset perturbation theory for non-covalent interactions, albeit with non-trivial computational cost. Here, the MP2C correction is computed in a monomer-centered basis instead of a dimer-centered one. When applied to a single dimer MP2 calculation, this change accelerates the MP2C dispersion correction several-fold while introducing only trivial new errors. More significantly, in the context of fragment-based molecular crystal studies, combination of the new monomer basis algorithm and the periodic symmetry of the crystal reduces the cost of computing the dispersion correction by two orders of magnitude. This speed-up reduces the MP2C dispersion correction calculation from a significant computational expense to a negligible one in crystals like aspirin or oxalyl dihydrazide, without compromising accuracy.

  14. Jackson State University's Center for Spatial Data Research and Applications: New facilities and new paradigms

    NASA Technical Reports Server (NTRS)

    Davis, Bruce E.; Elliot, Gregory

    1989-01-01

    Jackson State University recently established the Center for Spatial Data Research and Applications, a Geographical Information System (GIS) and remote sensing laboratory. Taking advantage of new technologies and new directions in the spatial (geographic) sciences, JSU is building a Center of Excellence in Spatial Data Management. New opportunities for research, applications, and employment are emerging. GIS requires fundamental shifts and new demands in traditional computer science and geographic training. The Center is not merely another computer lab but is one setting the pace in a new applied frontier. GIS and its associated technologies are discussed. The Center's facilities are described. An ARC/INFO GIS runs on a Vax mainframe, with numerous workstations. Image processing packages include ELAS, LIPS, VICAR, and ERDAS. A host of hardware and software peripheral are used in support. Numerous projects are underway, such as the construction of a Gulf of Mexico environmental data base, development of AI in image processing, a land use dynamics study of metropolitan Jackson, and others. A new academic interdisciplinary program in Spatial Data Management is under development, combining courses in Geography and Computer Science. The broad range of JSU's GIS and remote sensing activities is addressed. The impacts on changing paradigms in the university and in the professional world conclude the discussion.

  15. Voltage profile program for the Kennedy Space Center electric power distribution system

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The Kennedy Space Center voltage profile program computes voltages at all busses greater than 1 Kv in the network under various conditions of load. The computation is based upon power flow principles and utilizes a Newton-Raphson iterative load flow algorithm. Power flow conditions throughout the network are also provided. The computer program is designed for both steady state and transient operation. In the steady state mode, automatic tap changing of primary distribution transformers is incorporated. Under transient conditions, such as motor starts etc., it is assumed that tap changing is not accomplished so that transformer secondary voltage is allowed to sag.

  16. Developmental Stages in School Computer Use: Neither Marx Nor Piaget.

    ERIC Educational Resources Information Center

    Lengel, James G.

    Karl Marx's theory of stages can be applied to computer use in the schools. The first stage, the P Stage, comprises the entry of the computer into the school. Computer use at this stage is personal and tends to center around one personality. Social studies teachers are seldom among this select few. The second stage of computer use, the D Stage, is…

  17. Nontrivial, Nonintelligent, Computer-Based Learning.

    ERIC Educational Resources Information Center

    Bork, Alfred

    1987-01-01

    This paper describes three interactive computer programs used with personal computers to present science learning modules for all ages. Developed by groups of teachers at the Educational Technology Center at the University of California, Irvine, these instructional materials do not use the techniques of contemporary artificial intelligence. (GDC)

  18. Advanced laptop and small personal computer technology

    NASA Technical Reports Server (NTRS)

    Johnson, Roger L.

    1991-01-01

    Advanced laptop and small personal computer technology is presented in the form of the viewgraphs. The following areas of hand carried computers and mobile workstation technology are covered: background, applications, high end products, technology trends, requirements for the Control Center application, and recommendations for the future.

  19. Argonne's Magellan Cloud Computing Research Project

    ScienceCinema

    Beckman, Pete

    2017-12-11

    Pete Beckman, head of Argonne's Leadership Computing Facility (ALCF), discusses the Department of Energy's new $32-million Magellan project, which designed to test how cloud computing can be used for scientific research. More information: http://www.anl.gov/Media_Center/News/2009/news091014a.html

  20. Argonne's Magellan Cloud Computing Research Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beckman, Pete

    Pete Beckman, head of Argonne's Leadership Computing Facility (ALCF), discusses the Department of Energy's new $32-million Magellan project, which designed to test how cloud computing can be used for scientific research. More information: http://www.anl.gov/Media_Center/News/2009/news091014a.html

  1. Computer Operating System Maintenance.

    DTIC Science & Technology

    1982-06-01

    FACILITY The Computer Management Information Facility ( CMIF ) system was developed by Rapp Systems to fulfill the need at the CRF to record and report on...computer center resource usage and utilization. The foundation of the CMIF system is a System 2000 data base (CRFMGMT) which stores and permits access

  2. Computational Nanotechnology Molecular Electronics, Materials and Machines

    NASA Technical Reports Server (NTRS)

    Srivastava, Deepak; Biegel, Bryan A. (Technical Monitor)

    2002-01-01

    This presentation covers research being performed on computational nanotechnology, carbon nanotubes and fullerenes at the NASA Ames Research Center. Topics cover include: nanomechanics of nanomaterials, nanotubes and composite materials, molecular electronics with nanotube junctions, kinky chemistry, and nanotechnology for solid-state quantum computers using fullerenes.

  3. Performance assessment of KORAT-3D on the ANL IBM-SP computer

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alexeyev, A.V.; Zvenigorodskaya, O.A.; Shagaliev, R.M.

    1999-09-01

    The TENAR code is currently being developed at the Russian Federal Nuclear Center (VNIIEF) as a coupled dynamics code for the simulation of transients in VVER and RBMK systems and other nuclear systems. The neutronic module in this code system is KORAT-3D. This module is also one of the most computationally intensive components of the code system. A parallel version of KORAT-3D has been implemented to achieve the goal of obtaining transient solutions in reasonable computational time, particularly for RBMK calculations that involve the application of >100,000 nodes. An evaluation of the KORAT-3D code performance was recently undertaken on themore » Argonne National Laboratory (ANL) IBM ScalablePower (SP) parallel computer located in the Mathematics and Computer Science Division of ANL. At the time of the study, the ANL IBM-SP computer had 80 processors. This study was conducted under the auspices of a technical staff exchange program sponsored by the International Nuclear Safety Center (INSC).« less

  4. User-Centered Design of Online Learning Communities

    ERIC Educational Resources Information Center

    Lambropoulos, Niki, Ed.; Zaphiris, Panayiotis, Ed.

    2007-01-01

    User-centered design (UCD) is gaining popularity in both the educational and business sectors. This is due to the fact that UCD sheds light on the entire process of analyzing, planning, designing, developing, using, evaluating, and maintaining computer-based learning. "User-Centered Design of Online Learning Communities" explains how…

  5. Planning for the Automation of School Library Media Centers.

    ERIC Educational Resources Information Center

    Caffarella, Edward P.

    1996-01-01

    Geared for school library media specialists whose centers are in the early stages of automation or conversion to a new system, this article focuses on major components of media center automation: circulation control; online public access catalogs; machine readable cataloging; retrospective conversion of print catalog cards; and computer networks…

  6. 28 CFR 523.13 - Community corrections center good time.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ADMISSION, CLASSIFICATION, AND TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.13 Community corrections center good time. Extra good time for an inmate in a Federal or contract Community Corrections... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Community corrections center good time...

  7. 28 CFR 523.13 - Community corrections center good time.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... ADMISSION, CLASSIFICATION, AND TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.13 Community corrections center good time. Extra good time for an inmate in a Federal or contract Community Corrections... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Community corrections center good time...

  8. 28 CFR 523.13 - Community corrections center good time.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... ADMISSION, CLASSIFICATION, AND TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.13 Community corrections center good time. Extra good time for an inmate in a Federal or contract Community Corrections... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Community corrections center good time...

  9. 28 CFR 523.13 - Community corrections center good time.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... ADMISSION, CLASSIFICATION, AND TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.13 Community corrections center good time. Extra good time for an inmate in a Federal or contract Community Corrections... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Community corrections center good time...

  10. 28 CFR 523.13 - Community corrections center good time.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ADMISSION, CLASSIFICATION, AND TRANSFER COMPUTATION OF SENTENCE Extra Good Time § 523.13 Community corrections center good time. Extra good time for an inmate in a Federal or contract Community Corrections... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Community corrections center good time...

  11. A Computer-Based System Integrating Instruction and Information Retrieval: A Description of Some Methodological Considerations.

    ERIC Educational Resources Information Center

    Selig, Judith A.; And Others

    This report, summarizing the activities of the Vision Information Center (VIC) in the field of computer-assisted instruction from December, 1966 to August, 1967, describes the methodology used to load a large body of information--a programed text on basic opthalmology--onto a computer for subsequent information retrieval and computer-assisted…

  12. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hules, John

    This 1998 annual report from the National Scientific Energy Research Computing Center (NERSC) presents the year in review of the following categories: Computational Science; Computer Science and Applied Mathematics; and Systems and Services. Also presented are science highlights in the following categories: Basic Energy Sciences; Biological and Environmental Research; Fusion Energy Sciences; High Energy and Nuclear Physics; and Advanced Scientific Computing Research and Other Projects.

  13. 76 FR 14669 - Privacy Act of 1974; CMS Computer Match No. 2011-02; HHS Computer Match No. 1007

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-17

    ... (CMS); and Department of Defense (DoD), Manpower Data Center (DMDC), Defense Enrollment and Eligibility... the results of the computer match and provide the information to TMA for use in its matching program... under TRICARE. DEERS will receive the results of the computer match and provide the information provided...

  14. 76 FR 50460 - Privacy Act of 1974; Notice of a Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-15

    ...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, Department of Defense (DoD). ACTION: Notice of a Computer Matching Program. SUMMARY: Subsection (e)(12) of the Privacy Act of 1974, as amended, (5 U.S.C. 552a) requires agencies to publish advance notice of any proposed or revised computer...

  15. 76 FR 77811 - Privacy Act of 1974; Notice of a Computer Matching Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-14

    ...; Notice of a Computer Matching Program AGENCY: Defense Manpower Data Center, Department of Defense (DoD). ACTION: Notice of a Computer Matching Program. SUMMARY: Subsection (e)(12) of the Privacy Act of 1974, as amended, (5 U.S.C. 552a) requires agencies to publish advance notice of any proposed or revised computer...

  16. ARC-2009-ACD09-0208-004

    NASA Image and Video Library

    2009-09-15

    Obama Administration launches Cloud Computing Initiative at Ames Research Center with left to right; S. Pete Worden, Center Director, Lori Garver, NASA Deputy Administrator, Vivek Kundra, White House Chief Federal Information Officer

  17. 77 FR 11139 - Center for Scientific Review; Notice of Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ...: Center for Scientific Review Special Emphasis Panel; ``Genetics and Epigenetics of Disease.'' Date: March... Scientific Review Special Emphasis Panel; Small Business: Cell, Computational, and Molecular Biology. Date...

  18. Biomedical Computing Technology Information Center: introduction and report of early progress

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maskewitz, B.F.; Henne, R.L.; McClain, W.J.

    1976-01-01

    In July 1975, the Biomedical Computing Technology Information Center (BCTIC) was established by the Division of Biomedical and Environmental Research of the U. S. Energy Research and Development Administration (ERDA) at the Oak Ridge National Laboratory. BCTIC collects, organizes, evaluates, and disseminates information on computing technology pertinent to biomedicine, providing needed routes of communication between installations and serving as a clearinghouse for the exchange of biomedical computing software, data, and interface designs. This paper presents BCTIC's functions and early progress to the MUMPS Users' Group in order to stimulate further discussion and cooperation between the two organizations. (BCTIC services aremore » available to its sponsors and their contractors and to any individual/group willing to participate in mutual exchange.) 1 figure.« less

  19. A nominally second-order cell-centered Lagrangian scheme for simulating elastic-plastic flows on two-dimensional unstructured grids

    NASA Astrophysics Data System (ADS)

    Maire, Pierre-Henri; Abgrall, Rémi; Breil, Jérôme; Loubère, Raphaël; Rebourcet, Bernard

    2013-02-01

    In this paper, we describe a cell-centered Lagrangian scheme devoted to the numerical simulation of solid dynamics on two-dimensional unstructured grids in planar geometry. This numerical method, utilizes the classical elastic-perfectly plastic material model initially proposed by Wilkins [M.L. Wilkins, Calculation of elastic-plastic flow, Meth. Comput. Phys. (1964)]. In this model, the Cauchy stress tensor is decomposed into the sum of its deviatoric part and the thermodynamic pressure which is defined by means of an equation of state. Regarding the deviatoric stress, its time evolution is governed by a classical constitutive law for isotropic material. The plasticity model employs the von Mises yield criterion and is implemented by means of the radial return algorithm. The numerical scheme relies on a finite volume cell-centered method wherein numerical fluxes are expressed in terms of sub-cell force. The generic form of the sub-cell force is obtained by requiring the scheme to satisfy a semi-discrete dissipation inequality. Sub-cell force and nodal velocity to move the grid are computed consistently with cell volume variation by means of a node-centered solver, which results from total energy conservation. The nominally second-order extension is achieved by developing a two-dimensional extension in the Lagrangian framework of the Generalized Riemann Problem methodology, introduced by Ben-Artzi and Falcovitz [M. Ben-Artzi, J. Falcovitz, Generalized Riemann Problems in Computational Fluid Dynamics, Cambridge Monogr. Appl. Comput. Math. (2003)]. Finally, the robustness and the accuracy of the numerical scheme are assessed through the computation of several test cases.

  20. Yahoo! Compute Coop (YCC). A Next-Generation Passive Cooling Design for Data Centers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Robison, AD; Page, Christina; Lytle, Bob

    The purpose of the Yahoo! Compute Coop (YCC) project is to research, design, build and implement a greenfield "efficient data factory" and to specifically demonstrate that the YCC concept is feasible for large facilities housing tens of thousands of heat-producing computing servers. The project scope for the Yahoo! Compute Coop technology includes: - Analyzing and implementing ways in which to drastically decrease energy consumption and waste output. - Analyzing the laws of thermodynamics and implementing naturally occurring environmental effects in order to maximize the "free-cooling" for large data center facilities. "Free cooling" is the direct usage of outside air tomore » cool the servers vs. traditional "mechanical cooling" which is supplied by chillers or other Dx units. - Redesigning and simplifying building materials and methods. - Shortening and simplifying build-to-operate schedules while at the same time reducing initial build and operating costs. Selected for its favorable climate, the greenfield project site is located in Lockport, NY. Construction on the 9.0 MW critical load data center facility began in May 2009, with the fully operational facility deployed in September 2010. The relatively low initial build cost, compatibility with current server and network models, and the efficient use of power and water are all key features that make it a highly compatible and globally implementable design innovation for the data center industry. Yahoo! Compute Coop technology is designed to achieve 99.98% uptime availability. This integrated building design allows for free cooling 99% of the year via the building's unique shape and orientation, as well as server physical configuration.« less

  1. Development of user-centered interfaces to search the knowledge resources of the Virginia Henderson International Nursing Library.

    PubMed

    Jones, Josette; Harris, Marcelline; Bagley-Thompson, Cheryl; Root, Jane

    2003-01-01

    This poster describes the development of user-centered interfaces in order to extend the functionality of the Virginia Henderson International Nursing Library (VHINL) from library to web based portal to nursing knowledge resources. The existing knowledge structure and computational models are revised and made complementary. Nurses' search behavior is captured and analyzed, and the resulting search models are mapped to the revised knowledge structure and computational model.

  2. Human Centered Design and Development for NASA's MerBoard

    NASA Technical Reports Server (NTRS)

    Trimble, Jay

    2003-01-01

    This viewgraph presentation provides an overview of the design and development process for NASA's MerBoard. These devices are large interactive display screens which can be shown on the user's computer, which will allow scientists in many locations to interpret and evaluate mission data in real-time. These tools are scheduled to be used during the 2003 Mars Exploration Rover (MER) expeditions. Topics covered include: mission overview, Mer Human Centered Computers, FIDO 2001 observations and MerBoard prototypes.

  3. Payload Operations Control Center (POCC). [spacelab flight operations

    NASA Technical Reports Server (NTRS)

    Shipman, D. L.; Noneman, S. R.; Terry, E. S.

    1981-01-01

    The Spacelab payload operations control center (POCC) timeline analysis program which is used to provide POCC activity and resource information as a function of mission time is described. This program is fully automated and interactive, and is equipped with tutorial displays. The tutorial displays are sufficiently detailed for use by a program analyst having no computer experience. The POCC timeline analysis program is designed to operate on the VAX/VMS version V2.1 computer system.

  4. Development of computational methods for unsteady aerodynamics at the NASA Langley Research Center

    NASA Technical Reports Server (NTRS)

    Yates, E. Carson, Jr.; Whitlow, Woodrow, Jr.

    1987-01-01

    The current scope, recent progress, and plans for research and development of computational methods for unsteady aerodynamics at the NASA Langley Research Center are reviewed. Both integral equations and finite difference methods for inviscid and viscous flows are discussed. Although the great bulk of the effort has focused on finite difference solution of the transonic small perturbation equation, the integral equation program is given primary emphasis here because it is less well known.

  5. Development of computational methods for unsteady aerodynamics at the NASA Langley Research Center

    NASA Technical Reports Server (NTRS)

    Yates, E. Carson, Jr.; Whitlow, Woodrow, Jr.

    1987-01-01

    The current scope, recent progress, and plans for research and development of computational methods for unsteady aerodynamics at the NASA Langley Research Center are reviewed. Both integral-equations and finite-difference method for inviscid and viscous flows are discussed. Although the great bulk of the effort has focused on finite-difference solution of the transonic small-perturbation equation, the integral-equation program is given primary emphasis here because it is less well known.

  6. Human Centered Computing for Mars Exploration

    NASA Technical Reports Server (NTRS)

    Trimble, Jay

    2005-01-01

    The science objectives are to determine the aqueous, climatic, and geologic history of a site on Mars where conditions may have been favorable to the preservation of evidence of prebiotic or biotic processes. Human Centered Computing is a development process that starts with users and their needs, rather than with technology. The goal is a system design that serves the user, where the technology fits the task and the complexity is that of the task not of the tool.

  7. Effect of solutes on the lattice parameters and elastic stiffness coefficients of body-centered tetragonal Fe

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fellinger, Michael R.; Hector, Jr., Louis G.; Trinkle, Dallas R.

    In this study, we compute changes in the lattice parameters and elastic stiffness coefficients C ij of body-centered tetragonal (bct) Fe due to Al, B, C, Cu, Mn, Si, and N solutes. Solute strain misfit tensors determine changes in the lattice parameters as well as strain contributions to the changes in the C ij. We also compute chemical contributions to the changes in the C ij, and show that the sum of the strain and chemical contributions agree with more computationally expensive direct calculations that simultaneously incorporate both contributions. Octahedral interstitial solutes, with C being the most important addition inmore » steels, must be present to stabilize the bct phase over the body-centered cubic phase. We therefore compute the effects of interactions between interstitial C solutes and substitutional solutes on the bct lattice parameters and C ij for all possible solute configurations in the dilute limit, and thermally average the results to obtain effective changes in properties due to each solute. Finally, the computed data can be used to estimate solute-induced changes in mechanical properties such as strength and ductility, and can be directly incorporated into mesoscale simulations of multiphase steels to model solute effects on the bct martensite phase.« less

  8. Heart CT scan

    MedlinePlus

    ... Computed tomography scan - heart; Calcium scoring; Multi-detector CT scan - heart; Electron beam computed tomography - heart; Agatston ... table that slides into the center of the CT scanner. You will lie on your back with ...

  9. 78 FR 68462 - Center for Scientific Review; Notice of Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ... personal privacy. Name of Committee: Center for Scientific Review Special Emphasis Panel; Brain Injury and... Methodologies Integrated Review Group; Biomedical Computing and Health Informatics Study Section. Date: December...

  10. IUWare and Computing Tools: Indiana University's Approach to Low-Cost Software.

    ERIC Educational Resources Information Center

    Sheehan, Mark C.; Williams, James G.

    1987-01-01

    Describes strategies for providing low-cost microcomputer-based software for classroom use on college campuses. Highlights include descriptions of the software (IUWare and Computing Tools); computing center support; license policies; documentation; promotion; distribution; staff, faculty, and user training; problems; and future plans. (LRW)

  11. Adaptive Mesh Experiments for Hyperbolic Partial Differential Equations

    DTIC Science & Technology

    1990-02-01

    JOSEPH E. FLAHERTY FEBRUARY 1990 US ARMY ARMAMENT RESEARCH , ~ DEVELOPMENT AND ENGINEERlING CENTER CLOSE COMBAT ARMAMENTS CENTER BENET LABORATORIES...NY 12189-4050 If. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE U.S. Army ARDEC February 1990 Close Combat Armaments Center 13. NUMBER OF...Flaherty Department of Computer Science Rensselaer Polytechnic Institute Troy, NY 12180-3590 and U.S. Army ARDEC Close Combat Armaments Center Benet

  12. Commercial Pilot Knowledge Test Guide

    DOT National Transportation Integrated Search

    1995-01-01

    The FAA has available hundreds of computer testing centers nationwide. These testing centers offer the full range of airman knowledge tests including military competence, instrument foreign pilot, and pilot examiner predesignated tests. Refer to appe...

  13. ARC-2009-ACD09-0208-029

    NASA Image and Video Library

    2009-09-15

    Obama Administration launches Cloud Computing Initiative at Ames Research Center. Vivek Kundra, White House Chief Federal Information Officer (right) and Lori Garver, NASA Deputy Administrator (left) get a tour & demo NASAS Supercomputing Center Hyperwall.

  14. 76 FR 24036 - Center for Scientific Review; Notice of Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-29

    ... personal privacy. Name of Committee: Center for Scientific Review Special Emphasis Panel, Brain Disorders... Integrated Review Group, Biomedical Computing and Health Informatics Study Section. Date: June 7-8, 2011...

  15. Instrument Rating Knowledge Test Guide

    DOT National Transportation Integrated Search

    1995-01-01

    The FAA has available hundreds of computer testing centers nationwide. These testing centers offer the full range of airman knowledge tests including military competence, instrument foreign pilot, and pilot examiner predesignated tests. Refer to appe...

  16. Network Computer Technology. Phase I: Viability and Promise within NASA's Desktop Computing Environment

    NASA Technical Reports Server (NTRS)

    Paluzzi, Peter; Miller, Rosalind; Kurihara, West; Eskey, Megan

    1998-01-01

    Over the past several months, major industry vendors have made a business case for the network computer as a win-win solution toward lowering total cost of ownership. This report provides results from Phase I of the Ames Research Center network computer evaluation project. It identifies factors to be considered for determining cost of ownership; further, it examines where, when, and how network computer technology might fit in NASA's desktop computing architecture.

  17. Displaying Computer Simulations Of Physical Phenomena

    NASA Technical Reports Server (NTRS)

    Watson, Val

    1991-01-01

    Paper discusses computer simulation as means of experiencing and learning to understand physical phenomena. Covers both present simulation capabilities and major advances expected in near future. Visual, aural, tactile, and kinesthetic effects used to teach such physical sciences as dynamics of fluids. Recommends classrooms in universities, government, and industry be linked to advanced computing centers so computer simulations integrated into education process.

  18. Association of Small Computer Users in Education (ASCUE) Summer Conference Proceedings (30th, North Myrtle Beach, South Carolina, June 7-12, 1997).

    ERIC Educational Resources Information Center

    Smith, Peter, Ed.

    Papers from a conference on small college computing issues are: "An On-line Microcomputer Course for Pre-service Teachers" (Mary K. Abkemeier); "The Mathematics and Computer Science Learning Center (MLC)" (Solomon T. Abraham); "Multimedia for the Non-Computer Science Faculty Member" (Stephen T. Anderson, Sr.); "Achieving Continuous Improvement:…

  19. Computer Self-Efficacy, Computer Anxiety, and Attitudes toward the Internet: A Study among Undergraduates in Unimas

    ERIC Educational Resources Information Center

    Sam, Hong Kian; Othman, Abang Ekhsan Abang; Nordin, Zaimuarifuddin Shukri

    2005-01-01

    Eighty-one female and sixty-seven male undergraduates at a Malaysian university, from seven faculties and a Center for Language Studies completed a Computer Self-Efficacy Scale, Computer Anxiety Scale, and an Attitudes toward the Internet Scale and give information about their use of the Internet. This survey research investigated undergraduates'…

  20. 75 FR 75393 - Schools and Libraries Universal Service Support Mechanism and A National Broadband Plan for Our...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-03

    ... anchors, both as centers for digital literacy and as hubs for access to public computers. While their... expansion of computer labs, and facilitated deployment of new educational applications that would not have... computer fees to help defray the cost of computers or training fees to help cover the cost of training...

  1. Computational Science | NREL

    Science.gov Websites

    Science Photo of person viewing 3D visualization of a wind turbine The NREL Computational Science challenges in fields ranging from condensed matter physics and nonlinear dynamics to computational fluid dynamics. NREL is also home to the most energy-efficient data center in the world, featuring Peregrine-the

  2. Delivering The Benefits of Chemical-Biological Integration in Computational Toxicology at the EPA (ACS Fall meeting)

    EPA Science Inventory

    Abstract: Researchers at the EPA’s National Center for Computational Toxicology integrate advances in biology, chemistry, and computer science to examine the toxicity of chemicals and help prioritize chemicals for further research based on potential human health risks. The intent...

  3. A Serious Game of Success

    ERIC Educational Resources Information Center

    Nikirk, Martin

    2006-01-01

    This article discusses a computer game design and animation pilot at Washington County Technical High School as part of the advanced computer applications completer program. The focus of the instructional program is to teach students the 16 components of computer game design through a team-centered, problem-solving instructional format. Among…

  4. Some Measurement and Instruction Related Considerations Regarding Computer Assisted Testing.

    ERIC Educational Resources Information Center

    Oosterhof, Albert C.; Salisbury, David F.

    The Assessment Resource Center (ARC) at Florida State University provides computer assisted testing (CAT) for approximately 4,000 students each term. Computer capabilities permit a small proctoring staff to administer tests simultaneously to large numbers of students. Programs provide immediate feedback for students and generate a variety of…

  5. 78 FR 48169 - Privacy Act of 1974; CMS Computer Match No. 2013-02; HHS Computer Match No. 1306; DoD-DMDC Match...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-07

    ...), Defense Manpower Data Center (DMDC) and the Office of the Assistant Secretary of Defense (Health Affairs.../TRICARE. DMDC will receive the results of the computer match and provide the information to TMA for use in...

  6. Introduction to the theory of machines and languages

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weidhaas, P. P.

    1976-04-01

    This text is intended to be an elementary ''guided tour'' through some basic concepts of modern computer science. Various models of computing machines and formal languages are studied in detail. Discussions center around questions such as, ''What is the scope of problems that can or cannot be solved by computers.''

  7. Management Needs for Computer Support.

    ERIC Educational Resources Information Center

    Irby, Alice J.

    University management has many and varied needs for effective computer services in support of their processing and information functions. The challenge for the computer center managers is to better understand these needs and assist in the development of effective and timely solutions. Management needs can range from accounting and payroll to…

  8. Computer Training for Early Childhood Educators.

    ERIC Educational Resources Information Center

    Specht, Jacqueline; Wood, Eileen; Willoughby, Teena

    Recent research in early childhood education (ECE) centers suggests that some teacher characteristics are not at a level that would support computer learning opportunities for children. This study identified areas of support required by teachers to provide a smooth introduction of the computer into the early childhood education classroom.…

  9. Administration of Computer Resources.

    ERIC Educational Resources Information Center

    Franklin, Gene F.

    Computing at Stanford University has, until recently, been performed at one of five facilities. The Stanford hospital operates an IBM 370/135 mainly for administrative use. The university business office has an IBM 370/145 for its administrative needs and support of the medical clinic. Under the supervision of the Stanford Computation Center are…

  10. Computer Conferencing: Distance Learning That Works.

    ERIC Educational Resources Information Center

    Norton, Robert E.; Stammen, Ronald M.

    This paper reports on a computer conferencing pilot project initiated by the Consortium for the Development of Professional Materials for Vocational Education and developed at the Center on Education and Training for Employment at Ohio State University. The report provides an introduction to computer conferencing and describes the stages of the…

  11. 75 FR 54162 - Privacy Act of 1974

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-03

    ... Program A. General The Computer Matching and Privacy Protection Act of 1988 (Pub. L. 100-503), amended the... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare and Medicaid Services [CMS Computer Match No. 2010-01; HHS Computer Match No. 1006] Privacy Act of 1974 AGENCY: Department of Health and...

  12. Presentation Software and the Single Computer.

    ERIC Educational Resources Information Center

    Brown, Cindy A.

    1998-01-01

    Shows how the "Kid Pix" software and a single multimedia computer can aid classroom instruction for kindergarten through second grade. Topics include using the computer as a learning center for small groups of students; making a "Kid Pix" slide show; using it as an electronic chalkboard; and creating curriculum-related…

  13. 78 FR 63196 - Privacy Act System of Records

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ... Technology Center (ITC) staff and contractors, who maintain the FCC's computer network. Other FCC employees... and Offices (B/ Os); 2. Electronic data, records, and files that are stored in the FCC's computer.... Access to the FACA electronic records, files, and data, which are housed in the FCC's computer network...

  14. Should Professors Ban Laptops?

    ERIC Educational Resources Information Center

    Carter, Susan Payne; Greenberg, Kyle; Walker, Michael S.

    2017-01-01

    Laptop computers have become commonplace in K-12 and college classrooms. With that, educators now face a critical decision. Should they embrace computers and put technology at the center of their instruction? Should they allow students to decide for themselves whether to use computers during class? Or should they ban screens altogether and embrace…

  15. Computational Nanotechnology at NASA Ames Research Center, 1996

    NASA Technical Reports Server (NTRS)

    Globus, Al; Bailey, David; Langhoff, Steve; Pohorille, Andrew; Levit, Creon; Chancellor, Marisa K. (Technical Monitor)

    1996-01-01

    Some forms of nanotechnology appear to have enormous potential to improve aerospace and computer systems; computational nanotechnology, the design and simulation of programmable molecular machines, is crucial to progress. NASA Ames Research Center has begun a computational nanotechnology program including in-house work, external research grants, and grants of supercomputer time. Four goals have been established: (1) Simulate a hypothetical programmable molecular machine replicating itself and building other products. (2) Develop molecular manufacturing CAD (computer aided design) software and use it to design molecular manufacturing systems and products of aerospace interest, including computer components. (3) Characterize nanotechnologically accessible materials of aerospace interest. Such materials may have excellent strength and thermal properties. (4) Collaborate with experimentalists. Current in-house activities include: (1) Development of NanoDesign, software to design and simulate a nanotechnology based on functionalized fullerenes. Early work focuses on gears. (2) A design for high density atomically precise memory. (3) Design of nanotechnology systems based on biology. (4) Characterization of diamonoid mechanosynthetic pathways. (5) Studies of the laplacian of the electronic charge density to understand molecular structure and reactivity. (6) Studies of entropic effects during self-assembly. Characterization of properties of matter for clusters up to sizes exhibiting bulk properties. In addition, the NAS (NASA Advanced Supercomputing) supercomputer division sponsored a workshop on computational molecular nanotechnology on March 4-5, 1996 held at NASA Ames Research Center. Finally, collaborations with Bill Goddard at CalTech, Ralph Merkle at Xerox Parc, Don Brenner at NCSU (North Carolina State University), Tom McKendree at Hughes, and Todd Wipke at UCSC are underway.

  16. Applications of Computer Technology in Complex Craniofacial Reconstruction.

    PubMed

    Day, Kristopher M; Gabrick, Kyle S; Sargent, Larry A

    2018-03-01

    To demonstrate our use of advanced 3-dimensional (3D) computer technology in the analysis, virtual surgical planning (VSP), 3D modeling (3DM), and treatment of complex congenital and acquired craniofacial deformities. We present a series of craniofacial defects treated at a tertiary craniofacial referral center utilizing state-of-the-art 3D computer technology. All patients treated at our center using computer-assisted VSP, prefabricated custom-designed 3DMs, and/or 3D printed custom implants (3DPCI) in the reconstruction of craniofacial defects were included in this analysis. We describe the use of 3D computer technology to precisely analyze, plan, and reconstruct 31 craniofacial deformities/syndromes caused by: Pierre-Robin (7), Treacher Collins (5), Apert's (2), Pfeiffer (2), Crouzon (1) Syndromes, craniosynostosis (6), hemifacial microsomia (2), micrognathia (2), multiple facial clefts (1), and trauma (3). In select cases where the available bone was insufficient for skeletal reconstruction, 3DPCIs were fabricated using 3D printing. We used VSP in 30, 3DMs in all 31, distraction osteogenesis in 16, and 3DPCIs in 13 cases. Utilizing these technologies, the above complex craniofacial defects were corrected without significant complications and with excellent aesthetic results. Modern 3D technology allows the surgeon to better analyze complex craniofacial deformities, precisely plan surgical correction with computer simulation of results, customize osteotomies, plan distractions, and print 3DPCI, as needed. The use of advanced 3D computer technology can be applied safely and potentially improve aesthetic and functional outcomes after complex craniofacial reconstruction. These techniques warrant further study and may be reproducible in various centers of care.

  17. For operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    Carmon, J. L.

    1983-01-01

    Computer programs for relational information management data base systems, spherical roller bearing analysis, a generalized pseudoinverse of a rectangular matrix, and software design and documentation language are summarized.

  18. NREL Evaluates Aquarius Liquid-Cooled High-Performance Computing Technology

    Science.gov Websites

    HPC and influence the modern data center designer towards adoption of liquid cooling. Our shared technology. Aquila and Sandia chose NREL's HPC Data Center for the initial installation and evaluation because the data center is configured for liquid cooling, along with the required instrumentation to

  19. NASA propagation information center

    NASA Technical Reports Server (NTRS)

    Smith, Ernest K.; Flock, Warren L.

    1990-01-01

    The NASA Propagation Information Center became formally operational in July 1988. It is located in the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. The center is several things: a communications medium for the propagation with the outside world, a mechanism for internal communication within the program, and an aid to management.

  20. "Hack" Is Not A Dirty Word--The Tenth Anniversary of Patron Access Microcomputer Centers in Libraries.

    ERIC Educational Resources Information Center

    Dewey, Patrick R.

    1986-01-01

    The history of patron access microcomputers in libraries is described as carrying on a tradition that information and computer power should be shared. Questions that all types of libraries need to ask in planning microcomputer centers are considered and several model centers are described. (EM)

  1. NASA Propagation Information Center

    NASA Technical Reports Server (NTRS)

    Smith, Ernest K.; Flock, Warren L.

    1989-01-01

    The NASA Propagation Information Center became formally operational in July 1988. It is located in the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. The Center is several things: a communications medium for the propagation with the outside world, a mechanism for internal communication within the program, and an aid to management.

  2. Center for space microelectronics technology

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The 1992 Technical Report of the Jet Propulsion Laboratory Center for Space Microelectronics Technology summarizes the technical accomplishments, publications, presentations, and patents of the center during the past year. The report lists 187 publications, 253 presentations, and 111 new technology reports and patents in the areas of solid-state devices, photonics, advanced computing, and custom microcircuits.

  3. 14 CFR 135.63 - Recordkeeping requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of gravity limits; (5) The center of gravity of the loaded aircraft, except that the actual center of gravity need not be computed if the aircraft is loaded according to a loading schedule or other approved method that ensures that the center of gravity of the loaded aircraft is within approved limits. In those...

  4. 14 CFR 135.63 - Recordkeeping requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... of gravity limits; (5) The center of gravity of the loaded aircraft, except that the actual center of gravity need not be computed if the aircraft is loaded according to a loading schedule or other approved method that ensures that the center of gravity of the loaded aircraft is within approved limits. In those...

  5. 14 CFR 135.63 - Recordkeeping requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of gravity limits; (5) The center of gravity of the loaded aircraft, except that the actual center of gravity need not be computed if the aircraft is loaded according to a loading schedule or other approved method that ensures that the center of gravity of the loaded aircraft is within approved limits. In those...

  6. 14 CFR 135.63 - Recordkeeping requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of gravity limits; (5) The center of gravity of the loaded aircraft, except that the actual center of gravity need not be computed if the aircraft is loaded according to a loading schedule or other approved method that ensures that the center of gravity of the loaded aircraft is within approved limits. In those...

  7. 14 CFR 135.63 - Recordkeeping requirements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of gravity limits; (5) The center of gravity of the loaded aircraft, except that the actual center of gravity need not be computed if the aircraft is loaded according to a loading schedule or other approved method that ensures that the center of gravity of the loaded aircraft is within approved limits. In those...

  8. Lessons Learned in Starting and Running a Neighborhood Networks Center.

    ERIC Educational Resources Information Center

    Department of Housing and Urban Development, Washington, DC.

    This guide shares information about setting up and operating Neighborhood Networks centers. (These centers operate in Department of Housing and Urban Development-assisted or -insured housing nationwide to help low-income people boost their basic skills and find good jobs, learn to use computers and the Internet, run businesses, improve their…

  9. [AERA. Dream machines and computing practices at the Mathematical Center].

    PubMed

    Alberts, Gerard; De Beer, Huub T

    2008-01-01

    Dream machines may be just as effective as the ones materialised. Their symbolic thrust can be quite powerful. The Amsterdam 'Mathematisch Centrum' (Mathematical Center), founded February 11, 1946, created a Computing Department in an effort to realise its goal of serving society. When Aad van Wijngaarden was appointed as head of the Computing Department, however, he claimed space for scientific research and computer construction, next to computing as a service. Still, the computing service following the five stage style of Hartree's numerical analysis remained a dominant characteristic of the work of the Computing Department. The high level of ambition held by Aad van Wijngaarden lead to ever renewed projections of big automatic computers, symbolised by the never-built AERA. Even a machine that was actually constructed, the ARRA which followed A.D. Booth's design of the ARC, never made it into real operation. It did serve Van Wijngaarden to bluff his way into the computer age by midsummer 1952. Not until January 1954 did the computing department have a working stored program computer, which for reasons of policy went under the same name: ARRA. After just one other machine, the ARMAC, had been produced, a separate company, Electrologica, was set up for the manufacture of computers, which produced the rather successful X1 computer. The combination of ambition and absence of a working machine lead to a high level of work on programming, way beyond the usual ideas of libraries of subroutines. Edsger W. Dijkstra in particular led the way to an emphasis on the duties of the programmer within the pattern of numerical analysis. Programs generating programs, known elsewhere as autocoding systems, were at the 'Mathematisch Centrum' called 'superprograms'. Practical examples were usually called a 'complex', in Dutch, where in English one might say 'system'. Historically, this is where software begins. Dekker's matrix complex, Dijkstra's interrupt system, Dijkstra and Zonneveld's ALGOL compiler--which for housekeeping contained 'the complex'--were actual examples of such super programs. In 1960 this compiler gave the Mathematical Center a leading edge in the early development of software.

  10. 2001 Flight Mechanics Symposium

    NASA Technical Reports Server (NTRS)

    Lynch, John P. (Editor)

    2001-01-01

    This conference publication includes papers and abstracts presented at the Flight Mechanics Symposium held on June 19-21, 2001. Sponsored by the Guidance, Navigation and Control Center of Goddard Space Flight Center, this symposium featured technical papers on a wide range of issues related to attitude/orbit determination, prediction and control; attitude simulation; attitude sensor calibration; theoretical foundation of attitude computation; dynamics model improvements; autonomous navigation; constellation design and formation flying; estimation theory and computational techniques; Earth environment mission analysis and design; and, spacecraft re-entry mission design and operations.

  11. The psychology of computer displays in the modern mission control center

    NASA Technical Reports Server (NTRS)

    Granaas, Michael M.; Rhea, Donald C.

    1988-01-01

    Work at NASA's Western Aeronautical Test Range (WATR) has demonstrated the need for increased consideration of psychological factors in the design of computer displays for the WATR mission control center. These factors include color perception, memory load, and cognitive processing abilities. A review of relevant work in the human factors psychology area is provided to demonstrate the need for this awareness. The information provided should be relevant in control room settings where computerized displays are being used.

  12. Image Understanding Research and Its Application to Cartography and Computer-Based Analysis of Aerial Imagery

    DTIC Science & Technology

    1983-05-01

    Parallel Computation that Assign Canonical Object-Based Frames of Refer- ence," Proc. 7th it. .nt. Onf. on Artifcial Intellig nce (IJCAI-81), Vol. 2...Perception of Linear Struc- ture in Imaged Data ." TN 276, Artiflci!.a Intelligence Center, SRI International, Feb. 1983. [Fram75] J.P. Frain and E.S...1983 May 1983 D C By: Martin A. Fischler, Program Director S ELECTE Principal Investigator, (415)859-5106 MAY 2 21990 Artificial Intelligence Center

  13. Computer-Supplemented Structural Drill Practice Versus Computer-Supplemented Semantic Drill Practice by Beginning College German Students: A Comparative Experiment

    DTIC Science & Technology

    1979-01-01

    language education in recent years can be seen in the movement from a teacher- to a learner -centered approach. The best evidence of a teacher-centered...most dramatic effect on how the learner is viewed. The learner now is recognized as an active participant in the learning process rather than as a... best , is optional. Cognitive psychologists, such as Ausubel, and many foreign language educators (Rivers, 1976; Grittner, 1977) believe that practice

  14. Simulation Applications at NASA Ames Research Center

    NASA Technical Reports Server (NTRS)

    Inouye, M.

    1984-01-01

    Aeronautical applications of simulation technology at Ames Research Center are described. The largest wind tunnel in the world is used to determine the flow field and aerodynamic characteristics of various aircraft, helicopter, and missile configurations. Large computers are used to obtain similar results through numerical solutions of the governing equations. Capabilities are illustrated by computer simulations of turbulence, aileron buzz, and an exhaust jet. Flight simulators are used to assess the handling qualities of advanced aircraft, particularly during takeoff and landing.

  15. Data centers as dispatchable loads to harness stranded power

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Kibaek; Yang, Fan; Zavala, Victor M.

    Here, we analyze how traditional data center placement and optimal placement of dispatchable data centers affect power grid efficiency. We use detailed network models, stochastic optimization formulations, and diverse renewable generation scenarios to perform our analysis. Our results reveal that significant spillage and stranded power will persist in power grids as wind power levels are increased. A counter-intuitive finding is that collocating data centers with inflexible loads next to wind farms has limited impacts on renewable portfolio standard (RPS) goals because it provides limited system-level flexibility. Such an approach can, in fact, increase stranded power and fossil-fueled generation. In contrast,more » optimally placing data centers that are dispatchable provides system-wide flexibility, reduces stranded power, and improves efficiency. In short, optimally placed dispatchable computing loads can enable better scaling to high RPS. In our case study, we find that these dispatchable computing loads are powered to 60-80% of their requested capacity, indicating that there are significant economic incentives provided by stranded power.« less

  16. Data centers as dispatchable loads to harness stranded power

    DOE PAGES

    Kim, Kibaek; Yang, Fan; Zavala, Victor M.; ...

    2016-07-20

    Here, we analyze how traditional data center placement and optimal placement of dispatchable data centers affect power grid efficiency. We use detailed network models, stochastic optimization formulations, and diverse renewable generation scenarios to perform our analysis. Our results reveal that significant spillage and stranded power will persist in power grids as wind power levels are increased. A counter-intuitive finding is that collocating data centers with inflexible loads next to wind farms has limited impacts on renewable portfolio standard (RPS) goals because it provides limited system-level flexibility. Such an approach can, in fact, increase stranded power and fossil-fueled generation. In contrast,more » optimally placing data centers that are dispatchable provides system-wide flexibility, reduces stranded power, and improves efficiency. In short, optimally placed dispatchable computing loads can enable better scaling to high RPS. In our case study, we find that these dispatchable computing loads are powered to 60-80% of their requested capacity, indicating that there are significant economic incentives provided by stranded power.« less

  17. System analysis for the Huntsville Operation Support Center distributed computer system

    NASA Technical Reports Server (NTRS)

    Ingels, F. M.

    1986-01-01

    A simulation model of the NASA Huntsville Operational Support Center (HOSC) was developed. This simulation model emulates the HYPERchannel Local Area Network (LAN) that ties together the various computers of HOSC. The HOSC system is a large installation of mainframe computers such as the Perkin Elmer 3200 series and the Dec VAX series. A series of six simulation exercises of the HOSC model is described using data sets provided by NASA. The analytical analysis of the ETHERNET LAN and the video terminals (VTs) distribution system are presented. An interface analysis of the smart terminal network model which allows the data flow requirements due to VTs on the ETHERNET LAN to be estimated, is presented.

  18. EOS MLS Science Data Processing System: A Description of Architecture and Capabilities

    NASA Technical Reports Server (NTRS)

    Cuddy, David T.; Echeverri, Mark D.; Wagner, Paul A.; Hanzel, Audrey T.; Fuller, Ryan A.

    2006-01-01

    This paper describes the architecture and capabilities of the Science Data Processing System (SDPS) for the EOS MLS. The SDPS consists of two major components--the Science Computing Facility and the Science Investigator-led Processing System. The Science Computing Facility provides the facilities for the EOS MLS Science Team to perform the functions of scientific algorithm development, processing software development, quality control of data products, and scientific analyses. The Science Investigator-led Processing System processes and reprocesses the science data for the entire mission and delivers the data products to the Science Computing Facility and to the Goddard Space Flight Center Earth Science Distributed Active Archive Center, which archives and distributes the standard science products.

  19. Development of a High Resolution Weather Forecast Model for Mesoamerica Using the NASA Nebula Cloud Computing Environment

    NASA Technical Reports Server (NTRS)

    Molthan, Andrew L.; Case, Jonathan L.; Venner, Jason; Moreno-Madrinan, Max. J.; Delgado, Francisco

    2012-01-01

    Over the past two years, scientists in the Earth Science Office at NASA fs Marshall Space Flight Center (MSFC) have explored opportunities to apply cloud computing concepts to support near real ]time weather forecast modeling via the Weather Research and Forecasting (WRF) model. Collaborators at NASA fs Short ]term Prediction Research and Transition (SPoRT) Center and the SERVIR project at Marshall Space Flight Center have established a framework that provides high resolution, daily weather forecasts over Mesoamerica through use of the NASA Nebula Cloud Computing Platform at Ames Research Center. Supported by experts at Ames, staff at SPoRT and SERVIR have established daily forecasts complete with web graphics and a user interface that allows SERVIR partners access to high resolution depictions of weather in the next 48 hours, useful for monitoring and mitigating meteorological hazards such as thunderstorms, heavy precipitation, and tropical weather that can lead to other disasters such as flooding and landslides. This presentation will describe the framework for establishing and providing WRF forecasts, example applications of output provided via the SERVIR web portal, and early results of forecast model verification against available surface ] and satellite ]based observations.

  20. Development of a High Resolution Weather Forecast Model for Mesoamerica Using the NASA Nebula Cloud Computing Environment

    NASA Astrophysics Data System (ADS)

    Molthan, A.; Case, J.; Venner, J.; Moreno-Madriñán, M. J.; Delgado, F.

    2012-12-01

    Over the past two years, scientists in the Earth Science Office at NASA's Marshall Space Flight Center (MSFC) have explored opportunities to apply cloud computing concepts to support near real-time weather forecast modeling via the Weather Research and Forecasting (WRF) model. Collaborators at NASA's Short-term Prediction Research and Transition (SPoRT) Center and the SERVIR project at Marshall Space Flight Center have established a framework that provides high resolution, daily weather forecasts over Mesoamerica through use of the NASA Nebula Cloud Computing Platform at Ames Research Center. Supported by experts at Ames, staff at SPoRT and SERVIR have established daily forecasts complete with web graphics and a user interface that allows SERVIR partners access to high resolution depictions of weather in the next 48 hours, useful for monitoring and mitigating meteorological hazards such as thunderstorms, heavy precipitation, and tropical weather that can lead to other disasters such as flooding and landslides. This presentation will describe the framework for establishing and providing WRF forecasts, example applications of output provided via the SERVIR web portal, and early results of forecast model verification against available surface- and satellite-based observations.

  1. Flight and Ground Instructor Knowledge Test Guide

    DOT National Transportation Integrated Search

    1994-01-01

    The FAA has available hundreds of computer testing centers nationwide. These testing centers offer the full range of airman knowledge tests including military competence, instrument foreign pilot, and pilot examiner screening tests. Refer to appendix...

  2. ARC-2009-ACD09-0208-023

    NASA Image and Video Library

    2009-09-15

    Obama Administration launches Cloud Computing Initiative at Ames Research Center. Vivek Kundra, White House Chief Federal Information Officer (right) and Lori Garver, NASA Deputy Administrator (left) get a tour & demo NASAS Supercomputing Center Hyperwall by Chris Kemp.

  3. High-Performance Computing Data Center Power Usage Effectiveness |

    Science.gov Websites

    Power Usage Effectiveness When the Energy Systems Integration Facility (ESIF) was conceived, NREL set an , ventilation, and air conditioning (HVAC), which captures fan walls, fan coils that support the data center

  4. For operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    Carmon, J. L.

    1983-01-01

    Computer programs for degaussing, magnetic field calculation, low speed wing flap systems aerodynamics, structural panel analysis, dynamic stress/strain data acquisition, allocation and network scheduling, and digital filters are discussed.

  5. Brief Survey of TSC Computing Facilities

    DOT National Transportation Integrated Search

    1972-05-01

    The Transportation Systems Center (TSC) has four, essentially separate, in-house computing facilities. We shall call them Honeywell Facility, the Hybrid Facility, the Multimode Simulation Facility, and the Central Facility. In addition to these four,...

  6. Computer Center: BASIC String Models of Genetic Information Transfer.

    ERIC Educational Resources Information Center

    Spain, James D., Ed.

    1984-01-01

    Discusses some of the major genetic information processes which may be modeled by computer program string manipulation, focusing on replication and transcription. Also discusses instructional applications of using string models. (JN)

  7. High Tech Programmers in Low-Income Communities: Creating a Computer Culture in a Community Technology Center

    NASA Astrophysics Data System (ADS)

    Kafai, Yasmin B.; Peppler, Kylie A.; Chiu, Grace M.

    For the last twenty years, issues of the digital divide have driven efforts around the world to address the lack of access to computers and the Internet, pertinent and language appropriate content, and technical skills in low-income communities (Schuler & Day, 2004a and b). The title of our paper makes reference to a milestone publication (Schon, Sanyal, & Mitchell, 1998) that showcased some of the early work and thinking in this area. Schon, Sanyal and Mitchell's book edition included an article outlining the Computer Clubhouse, a type of community technology center model, which was developed to create opportunities for youth in low-income communities to become creators and designers of technologies by (1998). The model has been very successful scaling up, with over 110 Computer Clubhouses now in existence worldwide.

  8. Evaluating the distance between the femoral tunnel centers in anatomic double-bundle anterior cruciate ligament reconstruction using a computer simulation

    PubMed Central

    Tashiro, Yasutaka; Okazaki, Ken; Iwamoto, Yukihide

    2015-01-01

    Purpose We aimed to clarify the distance between the anteromedial (AM) bundle and posterolateral (PL) bundle tunnel-aperture centers by simulating the anatomical femoral tunnel placement during double-bundle anterior cruciate ligament reconstruction using 3-D computer-aided design models of the knee, in order to discuss the risk of tunnel overlap. Relationships between the AM to PL center distance, body height, and sex difference were also analyzed. Patients and methods The positions of the AM and PL tunnel centers were defined based on previous studies using the quadrant method, and were superimposed anatomically onto the 3-D computer-aided design knee models from 68 intact femurs. The distance between the tunnel centers was measured using the 3-D DICOM software package. The correlation between the AM–PL distance and the subject’s body height was assessed, and a cutoff height value for a higher risk of overlap of the AM and PL tunnel apertures was identified. Results The distance between the AM and PL centers was 10.2±0.6 mm in males and 9.4±0.5 mm in females (P<0.01). The AM–PL center distance demonstrated good correlation with body height in both males (r=0.66, P<0.01) and females (r=0.63, P<0.01). When 9 mm was defined as the critical distance between the tunnel centers to preserve a 2 mm bony bridge between the two tunnels, the cutoff value was calculated to be a height of 160 cm in males and 155 cm in females. Conclusion When AM and PL tunnels were placed anatomically in simulated double-bundle anterior cruciate ligament reconstruction, the distance between the two tunnel centers showed a strong positive correlation with body height. In cases with relatively short stature, the AM and PL tunnel apertures are considered to be at a higher risk of overlap when surgeons choose the double-bundle technique. PMID:26170727

  9. PNNL’s Building Operations Control Center

    ScienceCinema

    Belew, Shan

    2018-01-16

    PNNL's Building Operations Control Center (BOCC) video provides an overview of the center, its capabilities, and its objectives. The BOCC was relocated to PNNL's new 3820 Systems Engineering Building in 2015. Although a key focus of the BOCC is on monitoring and improving the operations of PNNL buildings, the center's state-of-the-art computational, software and visualization resources also have provided a platform for PNNL buildings-related research projects.

  10. A Horizontal Tilt Correction Method for Ship License Numbers Recognition

    NASA Astrophysics Data System (ADS)

    Liu, Baolong; Zhang, Sanyuan; Hong, Zhenjie; Ye, Xiuzi

    2018-02-01

    An automatic ship license numbers (SLNs) recognition system plays a significant role in intelligent waterway transportation systems since it can be used to identify ships by recognizing the characters in SLNs. Tilt occurs frequently in many SLNs because the monitors and the ships usually have great vertical or horizontal angles, which decreases the accuracy and robustness of a SLNs recognition system significantly. In this paper, we present a horizontal tilt correction method for SLNs. For an input tilt SLN image, the proposed method accomplishes the correction task through three main steps. First, a MSER-based characters’ center-points computation algorithm is designed to compute the accurate center-points of the characters contained in the input SLN image. Second, a L 1- L 2 distance-based straight line is fitted to the computed center-points using M-estimator algorithm. The tilt angle is estimated at this stage. Finally, based on the computed tilt angle, an affine transformation rotation is conducted to rotate and to correct the input SLN horizontally. At last, the proposed method is tested on 200 tilt SLN images, the proposed method is proved to be effective with a tilt correction rate of 80.5%.

  11. Using Computational Modeling to Assess the Impact of Clinical Decision Support on Cancer Screening within Community Health Centers

    PubMed Central

    Carney, Timothy Jay; Morgan, Geoffrey P.; Jones, Josette; McDaniel, Anna M.; Weaver, Michael; Weiner, Bryan; Haggstrom, David A.

    2014-01-01

    Our conceptual model demonstrates our goal to investigate the impact of clinical decision support (CDS) utilization on cancer screening improvement strategies in the community health care (CHC) setting. We employed a dual modeling technique using both statistical and computational modeling to evaluate impact. Our statistical model used the Spearman’s Rho test to evaluate the strength of relationship between our proximal outcome measures (CDS utilization) against our distal outcome measure (provider self-reported cancer screening improvement). Our computational model relied on network evolution theory and made use of a tool called Construct-TM to model the use of CDS measured by the rate of organizational learning. We employed the use of previously collected survey data from community health centers Cancer Health Disparities Collaborative (HDCC). Our intent is to demonstrate the added valued gained by using a computational modeling tool in conjunction with a statistical analysis when evaluating the impact a health information technology, in the form of CDS, on health care quality process outcomes such as facility-level screening improvement. Significant simulated disparities in organizational learning over time were observed between community health centers beginning the simulation with high and low clinical decision support capability. PMID:24953241

  12. A Fluid Structure Algorithm with Lagrange Multipliers to Model Free Swimming

    NASA Astrophysics Data System (ADS)

    Sahin, Mehmet; Dilek, Ezgi

    2017-11-01

    A new monolithic approach is prosed to solve the fluid-structure interaction (FSI) problem with Lagrange multipliers in order to model free swimming/flying. In the present approach, the fluid domain is modeled by the incompressible Navier-Stokes equations and discretized using an Arbitrary Lagrangian-Eulerian (ALE) formulation based on the stable side-centered unstructured finite volume method. The solid domain is modeled by the constitutive laws for the nonlinear Saint Venant-Kirchhoff material and the classical Galerkin finite element method is used to discretize the governing equations in a Lagrangian frame. In order to impose the body motion/deformation, the distance between the constraint pair nodes is imposed using the Lagrange multipliers, which is independent from the frame of reference. The resulting algebraic linear equations are solved in a fully coupled manner using a dual approach (null space method). The present numerical algorithm is initially validated for the classical FSI benchmark problems and then applied to the free swimming of three linked ellipses. The authors are grateful for the use of the computing resources provided by the National Center for High Performance Computing (UYBHM) under Grant Number 10752009 and the computing facilities at TUBITAK-ULAKBIM, High Performance and Grid Computing Center.

  13. Staff Views of Acceptability and Appropriateness of a Computer-Delivered Brief Intervention for Moderate Drug and Alcohol Use.

    PubMed

    Mitchell, Shannon Gwin; Monico, Laura B; Gryczynski, Jan; O'Grady, Kevin E; Schwartz, Robert P

    2015-01-01

    The use of computers for identifying and intervening with stigmatized behaviors, such as drug use, offers promise for underserved, rural areas; however, the acceptability and appropriateness of using computerized brief intervention (CBIs) must be taken into consideration. In the present study, 12 staff members representing a range of clinic roles in two rural, federally qualified health centers completed semi-structured interviews in a qualitative investigation of CBI vs. counselor-delivered individual brief intervention (IBI). Thematic content analysis was conducted using a constant comparative method, examining the range of responses within each interview as well as data across interview respondents. Overall, staff found the idea of providing CBIs both acceptable and appropriate for their patient population. Acceptability by clinic staff centered on the ready availability of the CBI. Staff also believed that patients might be more forthcoming in response to a computer program than a personal interview. However, some staff voiced reservations concerning the appropriateness of CBIs for subsets of patients, including older patients, illiterate individuals, or those unfamiliar with computers. Findings support the potential suitability and potential benefits of providing CBIs to patients in rural health centers.

  14. Sub-Pixel Extraction of Laser Stripe Center Using an Improved Gray-Gravity Method †

    PubMed Central

    Li, Yuehua; Zhou, Jingbo; Huang, Fengshan; Liu, Lijian

    2017-01-01

    Laser stripe center extraction is a key step for the profile measurement of line structured light sensors (LSLS). To accurately obtain the center coordinates at sub-pixel level, an improved gray-gravity method (IGGM) was proposed. Firstly, the center points of the stripe were computed using the gray-gravity method (GGM) for all columns of the image. By fitting these points using the moving least squares algorithm, the tangential vector, the normal vector and the radius of curvature can be robustly obtained. One rectangular region could be defined around each of the center points. Its two sides that are parallel to the tangential vector could alter their lengths according to the radius of the curvature. After that, the coordinate for each center point was recalculated within the rectangular region and in the direction of the normal vector. The center uncertainty was also analyzed based on the Monte Carlo method. The obtained experimental results indicate that the IGGM is suitable for both the smooth stripes and the ones with sharp corners. The high accuracy center points can be obtained at a relatively low computation cost. The measured results of the stairs and the screw surface further demonstrate the effectiveness of the method. PMID:28394288

  15. Controlling Infrastructure Costs: Right-Sizing the Mission Control Facility

    NASA Technical Reports Server (NTRS)

    Martin, Keith; Sen-Roy, Michael; Heiman, Jennifer

    2009-01-01

    Johnson Space Center's Mission Control Center is a space vehicle, space program agnostic facility. The current operational design is essentially identical to the original facility architecture that was developed and deployed in the mid-90's. In an effort to streamline the support costs of the mission critical facility, the Mission Operations Division (MOD) of Johnson Space Center (JSC) has sponsored an exploratory project to evaluate and inject current state-of-the-practice Information Technology (IT) tools, processes and technology into legacy operations. The general push in the IT industry has been trending towards a data-centric computer infrastructure for the past several years. Organizations facing challenges with facility operations costs are turning to creative solutions combining hardware consolidation, virtualization and remote access to meet and exceed performance, security, and availability requirements. The Operations Technology Facility (OTF) organization at the Johnson Space Center has been chartered to build and evaluate a parallel Mission Control infrastructure, replacing the existing, thick-client distributed computing model and network architecture with a data center model utilizing virtualization to provide the MCC Infrastructure as a Service. The OTF will design a replacement architecture for the Mission Control Facility, leveraging hardware consolidation through the use of blade servers, increasing utilization rates for compute platforms through virtualization while expanding connectivity options through the deployment of secure remote access. The architecture demonstrates the maturity of the technologies generally available in industry today and the ability to successfully abstract the tightly coupled relationship between thick-client software and legacy hardware into a hardware agnostic "Infrastructure as a Service" capability that can scale to meet future requirements of new space programs and spacecraft. This paper discusses the benefits and difficulties that a migration to cloud-based computing philosophies has uncovered when compared to the legacy Mission Control Center architecture. The team consists of system and software engineers with extensive experience with the MCC infrastructure and software currently used to support the International Space Station (ISS) and Space Shuttle program (SSP).

  16. Computer Technology for Industry

    NASA Technical Reports Server (NTRS)

    1979-01-01

    In this age of the computer, more and more business firms are automating their operations for increased efficiency in a great variety of jobs, from simple accounting to managing inventories, from precise machining to analyzing complex structures. In the interest of national productivity, NASA is providing assistance both to longtime computer users and newcomers to automated operations. Through a special technology utilization service, NASA saves industry time and money by making available already developed computer programs which have secondary utility. A computer program is essentially a set of instructions which tells the computer how to produce desired information or effect by drawing upon its stored input. Developing a new program from scratch can be costly and time-consuming. Very often, however, a program developed for one purpose can readily be adapted to a totally different application. To help industry take advantage of existing computer technology, NASA operates the Computer Software Management and Information Center (COSMIC)(registered TradeMark),located at the University of Georgia. COSMIC maintains a large library of computer programs developed for NASA, the Department of Defense, the Department of Energy and other technology-generating agencies of the government. The Center gets a continual flow of software packages, screens them for adaptability to private sector usage, stores them and informs potential customers of their availability.

  17. Center removal amount control of magnetorheological finishing process by spiral polishing way

    NASA Astrophysics Data System (ADS)

    Wang, Yajun; He, Jianguo; Ji, Fang; Huang, Wen; Xiao, Hong; Luo, Qing; Zheng, Yongcheng

    2010-10-01

    Spiral polishing is a traditional process of computer-controlled optical surfacing. However, the additional polishing amount is great and the center polishing amount is difficult to control. At first, a simplified mathematics model is presented for magnetorheological finishing, which indicates that the center polishing amount and additional polishing amount are proportional to the length and peak value of magnetorheological finishing influence function, and are inversely proportional to pitch and rotation rate of spiral track, and the center polishing amount is much bigger than average polishing amount. Secondly, the relationships of "tool feed way and center polishing amount", "spiral pitch and calculation accuracy of influence matrix for dwell time function solution", "spiral pitch and center polishing amount" and "peak removal rate, dimensions of removal function and center removal amount" are studied by numerical computation by Archimedes spiral path. It shows that the center polishing amount is much bigger in feed stage than that in backhaul stage when the head of influence function is towards workpiece edge in feeding; and the bigger pitch, the bigger calculation error of influence matrix elements; and the bigger pitch, the smaller center polishing amount, and the smaller peak removal rate and dimensions of removal function, the smaller center removal amount. At last, the polishing results are given, which indicates that the center polishing amount is acceptable with a suitable polishing amount rate of feed stage and backhaul stage, and with a suitable spiral pitch during magnetorheological finishing procedure by spiral motion way.

  18. NOAA/West coast and Alaska Tsunami warning center Atlantic Ocean response criteria

    USGS Publications Warehouse

    Whitmore, P.; Refidaff, C.; Caropolo, M.; Huerfano-Moreno, V.; Knight, W.; Sammler, W.; Sandrik, A.

    2009-01-01

    West Coast/Alaska Tsunami Warning Center (WCATWC) response criteria for earthquakesoccurring in the Atlantic and Caribbean basins are presented. Initial warning center decisions are based on an earthquake's location, magnitude, depth, distance from coastal locations, and precomputed threat estimates based on tsunami models computed from similar events. The new criteria will help limit the geographical extent of warnings and advisories to threatened regions, and complement the new operational tsunami product suite. Criteria are set for tsunamis generated by earthquakes, which are by far the main cause of tsunami generation (either directly through sea floor displacement or indirectly by triggering of sub-sea landslides).The new criteria require development of a threat data base which sets warning or advisory zones based on location, magnitude, and pre-computed tsunami models. The models determine coastal tsunami amplitudes based on likely tsunami source parameters for a given event. Based on the computed amplitude, warning and advisory zones are pre-set.

  19. Production Management System for AMS Computing Centres

    NASA Astrophysics Data System (ADS)

    Choutko, V.; Demakov, O.; Egorov, A.; Eline, A.; Shan, B. S.; Shi, R.

    2017-10-01

    The Alpha Magnetic Spectrometer [1] (AMS) has collected over 95 billion cosmic ray events since it was installed on the International Space Station (ISS) on May 19, 2011. To cope with enormous flux of events, AMS uses 12 computing centers in Europe, Asia and North America, which have different hardware and software configurations. The centers are participating in data reconstruction, Monte-Carlo (MC) simulation [2]/Data and MC production/as well as in physics analysis. Data production management system has been developed to facilitate data and MC production tasks in AMS computing centers, including job acquiring, submitting, monitoring, transferring, and accounting. It was designed to be modularized, light-weighted, and easy-to-be-deployed. The system is based on Deterministic Finite Automaton [3] model, and implemented by script languages, Python and Perl, and the built-in sqlite3 database on Linux operating systems. Different batch management systems, file system storage, and transferring protocols are supported. The details of the integration with Open Science Grid are presented as well.

  20. EHR use and patient satisfaction: What we learned.

    PubMed

    Farber, Neil J; Liu, Lin; Chen, Yunan; Calvitti, Alan; Street, Richard L; Zuest, Danielle; Bell, Kristin; Gabuzda, Mark; Gray, Barbara; Ashfaq, Shazia; Agha, Zia

    2015-11-01

    Few studies have quantitatively examined the degree to which the use of the computer affects patients' satisfaction with the clinician and the quality of the visit. We conducted a study to examine this association. Twenty-three clinicians (21 internal medicine physicians, 2 nurse practitioners) were recruited from 4 Veteran Affairs Medical Center (VAMC) clinics located in San Diego, Calif. Five to 6 patients for most clinicians (one patient each for 2 of the clinicians) were recruited to participate in a study of patient-physician communication. The clinicians' computer use and the patient-clinician interactions in the exam room were captured in real time via video recordings of the interactions and the computer screen, and through the use of the Morae usability testing software system, which recorded clinician clicks and scrolls on the computer. After the visit, patients were asked to complete a satisfaction survey. The final sample consisted of 126 consultations. Total patient satisfaction (beta=0.014; P=.027) and patient satisfaction with patient-centered communication (beta=0.02; P=.02) were significantly associated with higher clinician “gaze time” at the patient. A higher percentage of gaze time during a visit (controlling for the length of the visit) was significantly associated with greater satisfaction with patient-centered communication (beta=0.628; P=.033). Higher clinician gaze time at the patient predicted greater patient satisfaction. This suggests that clinicians would be well served to refine their multitasking skills so that they communicate in a patient-centered manner while performing necessary computer-related tasks. These findings also have important implications for clinical training with respect to using an electronic health record (EHR) system in ways that do not impede the one-on-one conversation between clinician and patient.

  1. A nominally second-order cell-centered Lagrangian scheme for simulating elastic–plastic flows on two-dimensional unstructured grids

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maire, Pierre-Henri, E-mail: maire@celia.u-bordeaux1.fr; Abgrall, Rémi, E-mail: remi.abgrall@math.u-bordeau1.fr; Breil, Jérôme, E-mail: breil@celia.u-bordeaux1.fr

    2013-02-15

    In this paper, we describe a cell-centered Lagrangian scheme devoted to the numerical simulation of solid dynamics on two-dimensional unstructured grids in planar geometry. This numerical method, utilizes the classical elastic-perfectly plastic material model initially proposed by Wilkins [M.L. Wilkins, Calculation of elastic–plastic flow, Meth. Comput. Phys. (1964)]. In this model, the Cauchy stress tensor is decomposed into the sum of its deviatoric part and the thermodynamic pressure which is defined by means of an equation of state. Regarding the deviatoric stress, its time evolution is governed by a classical constitutive law for isotropic material. The plasticity model employs themore » von Mises yield criterion and is implemented by means of the radial return algorithm. The numerical scheme relies on a finite volume cell-centered method wherein numerical fluxes are expressed in terms of sub-cell force. The generic form of the sub-cell force is obtained by requiring the scheme to satisfy a semi-discrete dissipation inequality. Sub-cell force and nodal velocity to move the grid are computed consistently with cell volume variation by means of a node-centered solver, which results from total energy conservation. The nominally second-order extension is achieved by developing a two-dimensional extension in the Lagrangian framework of the Generalized Riemann Problem methodology, introduced by Ben-Artzi and Falcovitz [M. Ben-Artzi, J. Falcovitz, Generalized Riemann Problems in Computational Fluid Dynamics, Cambridge Monogr. Appl. Comput. Math. (2003)]. Finally, the robustness and the accuracy of the numerical scheme are assessed through the computation of several test cases.« less

  2. Scientific Computing Strategic Plan for the Idaho National Laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Whiting, Eric Todd

    Scientific computing is a critical foundation of modern science. Without innovations in the field of computational science, the essential missions of the Department of Energy (DOE) would go unrealized. Taking a leadership role in such innovations is Idaho National Laboratory’s (INL’s) challenge and charge, and is central to INL’s ongoing success. Computing is an essential part of INL’s future. DOE science and technology missions rely firmly on computing capabilities in various forms. Modeling and simulation, fueled by innovations in computational science and validated through experiment, are a critical foundation of science and engineering. Big data analytics from an increasing numbermore » of widely varied sources is opening new windows of insight and discovery. Computing is a critical tool in education, science, engineering, and experiments. Advanced computing capabilities in the form of people, tools, computers, and facilities, will position INL competitively to deliver results and solutions on important national science and engineering challenges. A computing strategy must include much more than simply computers. The foundational enabling component of computing at many DOE national laboratories is the combination of a showcase like data center facility coupled with a very capable supercomputer. In addition, network connectivity, disk storage systems, and visualization hardware are critical and generally tightly coupled to the computer system and co located in the same facility. The existence of these resources in a single data center facility opens the doors to many opportunities that would not otherwise be possible.« less

  3. Software Accelerates Computing Time for Complex Math

    NASA Technical Reports Server (NTRS)

    2014-01-01

    Ames Research Center awarded Newark, Delaware-based EM Photonics Inc. SBIR funding to utilize graphic processing unit (GPU) technology- traditionally used for computer video games-to develop high-computing software called CULA. The software gives users the ability to run complex algorithms on personal computers with greater speed. As a result of the NASA collaboration, the number of employees at the company has increased 10 percent.

  4. Silicon Wafer Advanced Packaging (SWAP). Multichip Module (MCM) Foundry Study. Version 2

    DTIC Science & Technology

    1991-04-08

    Next Layer Dielectric Spacing - Additional Metal Thickness Impact on Dielectric Uniformity/Adhiesion. The first step in .!Ie EPerimental design would be... design CAM - computer aided manufacturing CAE - computer aided engineering CALCE - computer aided life cycle engineering center CARMA - computer aided...expansion 5 j- CVD - chemical vapor deposition J . ..- j DA - design automation J , DEC - Digital Equipment Corporation --- DFT - design for testability

  5. NECC '86: Proceedings of the National Educational Computing Conference (7th, San Diego, California, June 4-6, 1986).

    ERIC Educational Resources Information Center

    Ryan, William C., Ed.

    The l50 papers and 28 panel discussion reports in this collection focus on innovations, trends, and research in the use of computers in a variety of educational settings. Topics discussed include: computer centers and laboratories; use of computer at various levels from K-12 through the university, including inservice teacher training; use of…

  6. Experimental Evidence on the Effects of Home Computers on Academic Achievement among Schoolchildren. National Poverty Center Working Paper Series #13-02

    ERIC Educational Resources Information Center

    Fairlie, Robert W.; Robinson, Jonathan

    2013-01-01

    Computers are an important part of modern education, yet large segments of the population--especially low-income and minority children--lack access to a computer at home. Does this impede educational achievement? We test this hypothesis by conducting the largest-ever field experiment involving the random provision of free computers for home use to…

  7. The Kepler Science Data Processing Pipeline Source Code Road Map

    NASA Technical Reports Server (NTRS)

    Wohler, Bill; Jenkins, Jon M.; Twicken, Joseph D.; Bryson, Stephen T.; Clarke, Bruce Donald; Middour, Christopher K.; Quintana, Elisa Victoria; Sanderfer, Jesse Thomas; Uddin, Akm Kamal; Sabale, Anima; hide

    2016-01-01

    We give an overview of the operational concepts and architecture of the Kepler Science Processing Pipeline. Designed, developed, operated, and maintained by the Kepler Science Operations Center (SOC) at NASA Ames Research Center, the Science Processing Pipeline is a central element of the Kepler Ground Data System. The SOC consists of an office at Ames Research Center, software development and operations departments, and a data center which hosts the computers required to perform data analysis. The SOC's charter is to analyze stellar photometric data from the Kepler spacecraft and report results to the Kepler Science Office for further analysis. We describe how this is accomplished via the Kepler Science Processing Pipeline, including, the software algorithms. We present the high-performance, parallel computing software modules of the pipeline that perform transit photometry, pixel-level calibration, systematic error correction, attitude determination, stellar target management, and instrument characterization.

  8. Exploring the role of pendant amines in transition metal complexes for the reduction of N2 to hydrazine and ammonia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bhattacharya, Papri; Prokopchuk, Demyan E.; Mock, Michael T.

    2017-03-01

    This review examines the synthesis and acid reactivity of transition metal dinitrogen complexes bearing diphosphine ligands containing pendant amine groups in the second coordination sphere. This manuscript is a review of the work performed in the Center for Molecular Electrocatalysis. This work was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy (U.S. DOE), Office of Science, Office of Basic Energy Sciences. EPR studies on Fe were performed using EMSL, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located atmore » PNNL. Computational resources were provided by the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory. Pacific Northwest National Laboratory is operated by Battelle for the U.S. DOE.« less

  9. Proceedings: Computer Science and Data Systems Technical Symposium, volume 1

    NASA Technical Reports Server (NTRS)

    Larsen, Ronald L.; Wallgren, Kenneth

    1985-01-01

    Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form are included for topics in three categories: computer science, data systems and space station applications.

  10. High-Performance Computing Data Center Efficiency Dashboard | Computational

    Science.gov Websites

    recovery water (ERW) loop Heat exchanger for energy recovery Thermosyphon Heat exchanger between ERW loop and cooling tower loop Evaporative cooling towers Learn more about our energy-efficient facility

  11. Computer Center: Software Review.

    ERIC Educational Resources Information Center

    Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

    1988-01-01

    Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

  12. 75 FR 11917 - Chrysler LLC, Technology Center, Including On-Site Leased Workers from Aerotek, Ajilon, Altair...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-12

    ..., Cer-Cad Engineering Resources, Computer Consultants of America, Computer Engrg Services, Compuware..., Automated Analysis Corp/Belcan, Bartech Group, CAE Tech, CDI Information Services, CER-CAD Engineering...

  13. Why Micros?

    ERIC Educational Resources Information Center

    Myers, Darlene

    1983-01-01

    Discusses development of the first computers; identifies five generations of computers; reviews projections for sales and proliferation of microcomputers into the marketplace; outlines procedures for selecting microcomputers and evaluating software; and reviews several articles on microcomputers centering on user requirements. (MBR)

  14. Operating Dedicated Data Centers - Is It Cost-Effective?

    NASA Astrophysics Data System (ADS)

    Ernst, M.; Hogue, R.; Hollowell, C.; Strecker-Kellog, W.; Wong, A.; Zaytsev, A.

    2014-06-01

    The advent of cloud computing centres such as Amazon's EC2 and Google's Computing Engine has elicited comparisons with dedicated computing clusters. Discussions on appropriate usage of cloud resources (both academic and commercial) and costs have ensued. This presentation discusses a detailed analysis of the costs of operating and maintaining the RACF (RHIC and ATLAS Computing Facility) compute cluster at Brookhaven National Lab and compares them with the cost of cloud computing resources under various usage scenarios. An extrapolation of likely future cost effectiveness of dedicated computing resources is also presented.

  15. Institute for Computational Mechanics in Propulsion (ICOMP)

    NASA Technical Reports Server (NTRS)

    Feiler, Charles E. (Editor)

    1991-01-01

    The Institute for Computational Mechanics in Propulsion (ICOMP) is operated jointly by Case Western Reserve University and the NASA Lewis Research Center in Cleveland, Ohio. The purpose of ICOMP is to develop techniques to improve problem-solving capabilities in all aspects of computational mechanics related to propulsion. The activities at ICOMP during 1990 are described.

  16. Staff | Computational Science | NREL

    Science.gov Websites

    develops and leads laboratory-wide efforts in high-performance computing and energy-efficient data centers Professional IV-High Perf Computing Jim.Albin@nrel.gov 303-275-4069 Ananthan, Shreyas Senior Scientist - High -Performance Algorithms and Modeling Shreyas.Ananthan@nrel.gov 303-275-4807 Bendl, Kurt IT Professional IV-High

  17. Institute for Computational Mechanics in Propulsion (ICOMP)

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The Institute for Computational Mechanics in Propulsion (ICOMP) is operated jointly by Case Western Reserve University and the NASA Lewis Research Center in Cleveland, Ohio. The purpose of ICOMP is to develop techniques to improve problem-solving capabilities in all aspects of computational mechanics related to propulsion. This report describes the activities at ICOMP during 1988.

  18. 42 CFR 417.588 - Computation of adjusted average per capita cost (AAPCC).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS Medicare Payment: Risk Basis § 417.588 Computation... 42 Public Health 3 2012-10-01 2012-10-01 false Computation of adjusted average per capita cost (AAPCC). 417.588 Section 417.588 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF...

  19. 42 CFR 417.588 - Computation of adjusted average per capita cost (AAPCC).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS Medicare Payment: Risk Basis § 417.588 Computation of... 42 Public Health 3 2011-10-01 2011-10-01 false Computation of adjusted average per capita cost (AAPCC). 417.588 Section 417.588 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF...

  20. 42 CFR 417.588 - Computation of adjusted average per capita cost (AAPCC).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS Medicare Payment: Risk Basis § 417.588 Computation of... 42 Public Health 3 2010-10-01 2010-10-01 false Computation of adjusted average per capita cost (AAPCC). 417.588 Section 417.588 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF...

  1. Institute for Computational Mechanics in Propulsion (ICOMP)

    NASA Technical Reports Server (NTRS)

    1988-01-01

    The Institute for Computational Mechanics in Propulsion (ICOMP) is operated jointly by Case Western Reserve University and the NASA Lewis Research Center in Cleveland, Ohio. The purpose of ICOMP is to develop techniques to improve problem-solving capabilities in all aspects of computational mechanics related to propulsion. Described are the activities of ICOMP during 1987.

  2. A Functional Specification for a Programming Language for Computer Aided Learning Applications.

    ERIC Educational Resources Information Center

    National Research Council of Canada, Ottawa (Ontario).

    In 1972 there were at least six different course authoring languages in use in Canada with little exchange of course materials between Computer Assisted Learning (CAL) centers. In order to improve facilities for producing "transportable" computer based course materials, a working panel undertook the definition of functional requirements of a user…

  3. High-Performance Computing Data Center | Computational Science | NREL

    Science.gov Websites

    liquid cooling to achieve its very low PUE, then captures and reuses waste heat as the primary heating dry cooler that uses refrigerant in a passive cycle to dissipate heat-is reducing onsite water Measuring efficiency through PUE Warm-water liquid cooling Re-using waste heat from computing components

  4. ASSURED CLOUD COMPUTING UNIVERSITY CENTER OFEXCELLENCE (ACC UCOE)

    DTIC Science & Technology

    2018-01-18

    average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed...infrastructure security -Design of algorithms and techniques for real- time assuredness in cloud computing -Map-reduce task assignment with data locality...46 DESIGN OF ALGORITHMS AND TECHNIQUES FOR REAL- TIME ASSUREDNESS IN CLOUD COMPUTING

  5. Assessing Information on the Internet: Toward Providing Library Services for Computer-Mediated Communication. A Final Report.

    ERIC Educational Resources Information Center

    Dillon, Martin; And Others

    The Online Computer Library Center Internet Resource project focused on the nature of electronic textual information available through remote access using the Internet and the problems associated with creating machine-readable cataloging (MARC) records for these objects using current USMARC format for computer files and "Anglo-American…

  6. Institute for Computational Mechanics in Propulsion (ICOMP) fourth annual review, 1989

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The Institute for Computational Mechanics in Propulsion (ICOMP) is operated jointly by Case Western Reserve University and the NASA Lewis Research Center. The purpose of ICOMP is to develop techniques to improve problem solving capabilities in all aspects of computational mechanics related to propulsion. The activities at ICOMP during 1989 are described.

  7. Integration of Computers into a Course on Biostatistics

    ERIC Educational Resources Information Center

    Gjerde, Craig L.

    1977-01-01

    The biostatistics course for undergraduate medical and dental students at the University of Connecticut Health Center is taught by the Keller Plan, and students can use computers to analyze data sets and to score their unit tests. The computer is an essential tool for data analysis and an attractive option for test scoring. (LBH)

  8. An information retrieval system for research file data

    Treesearch

    Joan E. Lengel; John W. Koning

    1978-01-01

    Research file data have been successfully retrieved at the Forest Products Laboratory through a high-speed cross-referencing system involving the computer program FAMULUS as modified by the Madison Academic Computing Center at the University of Wisconsin. The method of data input, transfer to computer storage, system utilization, and effectiveness are discussed....

  9. For operation of the Computer Software Management and Information Center (COSMIC)

    NASA Technical Reports Server (NTRS)

    Carmon, J. L.

    1983-01-01

    Computer programs for large systems of normal equations, an interactive digital signal process, structural analysis of cylindrical thrust chambers, swirling turbulent axisymmetric recirculating flows in practical isothermal combustor geometrics, computation of three dimensional combustor performance, a thermal radiation analysis system, transient response analysis, and a software design analysis are summarized.

  10. Heterogeneity in Health Care Computing Environments

    PubMed Central

    Sengupta, Soumitra

    1989-01-01

    This paper discusses issues of heterogeneity in computer systems, networks, databases, and presentation techniques, and the problems it creates in developing integrated medical information systems. The need for institutional, comprehensive goals are emphasized. Using the Columbia-Presbyterian Medical Center's computing environment as the case study, various steps to solve the heterogeneity problem are presented.

  11. Educational and Commercial Utilization of a Chemical Information Center, Four Year Summary.

    ERIC Educational Resources Information Center

    Williams, Martha E.; And Others

    The major objective of the IITRI Computer Search Center is to educate and link industry, academia, and government institutions to chemical and other scientific information systems and sources. The Center was developed to meet this objective and is in full operation providing services to users from a variety of machine-readable data bases with…

  12. The Impact of Wireless Technology on Order Selection Audits at an Auto Parts Distribution Center

    ERIC Educational Resources Information Center

    Goomas, David T.

    2012-01-01

    Audits of store order pallets or totes performed by auditors at five distribution centers (two experimental and three comparison distribution centers) were used to check for picking accuracy prior to being loaded onto a truck for store delivery. Replacing the paper audits with wireless handheld computers that included immediate auditory and visual…

  13. Coordinating Center: Molecular and Cellular Findings of Screen-Detected Lesions | Division of Cancer Prevention

    Cancer.gov

    The Molecular and Cellular Characterization of Screen‐Detected Lesions ‐ Coordinating Center and Data Management Group will provide support for the participating studies responding to RFA CA14‐10. The coordinating center supports three main domains: network coordination, statistical support and computational analysis and protocol development and database support. Support for

  14. Five Essentials to Greening the Data Center

    ERIC Educational Resources Information Center

    Gordon, Dan

    2011-01-01

    A 2008 study by the management-consulting firm McKinsey & Co. projected that the world's data centers would surpass the airline industry in greenhouse gas emissions by 2020. Certainly adding to those emissions are K-12 districts, whose data centers hold the equipment that serves as the backbone for an ever-growing number of computing initiatives.…

  15. A Survey of Management Tasks Performed by Day Care Center Directors.

    ERIC Educational Resources Information Center

    Dent, Barbara

    The general problem addressed in this survey is the identification of the management training needs of day care center directors. A questionnaire was developed and mailed to 102 directors of full time, pre-school day care centers in Baltimore City. The directors' answers were tabulated and simple percentages were computed. Directors were asked to…

  16. Computational fluid dynamics research at the United Technologies Research Center requiring supercomputers

    NASA Astrophysics Data System (ADS)

    Landgrebe, Anton J.

    1987-03-01

    An overview of research activities at the United Technologies Research Center (UTRC) in the area of Computational Fluid Dynamics (CFD) is presented. The requirement and use of various levels of computers, including supercomputers, for the CFD activities is described. Examples of CFD directed toward applications to helicopters, turbomachinery, heat exchangers, and the National Aerospace Plane are included. Helicopter rotor codes for the prediction of rotor and fuselage flow fields and airloads were developed with emphasis on rotor wake modeling. Airflow and airload predictions and comparisons with experimental data are presented. Examples are presented of recent parabolized Navier-Stokes and full Navier-Stokes solutions for hypersonic shock-wave/boundary layer interaction, and hydrogen/air supersonic combustion. In addition, other examples of CFD efforts in turbomachinery Navier-Stokes methodology and separated flow modeling are presented. A brief discussion of the 3-tier scientific computing environment is also presented, in which the researcher has access to workstations, mid-size computers, and supercomputers.

  17. Computational fluid dynamics research at the United Technologies Research Center requiring supercomputers

    NASA Technical Reports Server (NTRS)

    Landgrebe, Anton J.

    1987-01-01

    An overview of research activities at the United Technologies Research Center (UTRC) in the area of Computational Fluid Dynamics (CFD) is presented. The requirement and use of various levels of computers, including supercomputers, for the CFD activities is described. Examples of CFD directed toward applications to helicopters, turbomachinery, heat exchangers, and the National Aerospace Plane are included. Helicopter rotor codes for the prediction of rotor and fuselage flow fields and airloads were developed with emphasis on rotor wake modeling. Airflow and airload predictions and comparisons with experimental data are presented. Examples are presented of recent parabolized Navier-Stokes and full Navier-Stokes solutions for hypersonic shock-wave/boundary layer interaction, and hydrogen/air supersonic combustion. In addition, other examples of CFD efforts in turbomachinery Navier-Stokes methodology and separated flow modeling are presented. A brief discussion of the 3-tier scientific computing environment is also presented, in which the researcher has access to workstations, mid-size computers, and supercomputers.

  18. Factors Predicting the Use of Technology: Findings From the Center for Research and Education on Aging and Technology Enhancement (CREATE)

    PubMed Central

    Czaja, Sara J.; Charness, Neil; Fisk, Arthur D.; Hertzog, Christopher; Nair, Sankaran N.; Rogers, Wendy A.; Sharit, Joseph

    2006-01-01

    The successful adoption of technology is becoming increasingly important to functional independence. The present article reports findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE) on the use of technology among community-dwelling adults. The sample included 1,204 individuals ranging in age from 18–91 years. All participants completed a battery that included measures of demographic characteristics, self-rated health, experience with technology, attitudes toward computers, and component cognitive abilities. Findings indicate that the older adults were less likely than younger adults to use technology in general, computers, and the World Wide Web. The results also indicate that computer anxiety, fluid intelligence, and crystallized intelligence were important predictors of the use of technology. The relationship between age and adoption of technology was mediated by cognitive abilities, computer self-efficacy, and computer anxiety. These findings are discussed in terms of training strategies to promote technology adoption. PMID:16768579

  19. Space and Earth Sciences, Computer Systems, and Scientific Data Analysis Support, Volume 1

    NASA Technical Reports Server (NTRS)

    Estes, Ronald H. (Editor)

    1993-01-01

    This Final Progress Report covers the specific technical activities of Hughes STX Corporation for the last contract triannual period of 1 June through 30 Sep. 1993, in support of assigned task activities at Goddard Space Flight Center (GSFC). It also provides a brief summary of work throughout the contract period of performance on each active task. Technical activity is presented in Volume 1, while financial and level-of-effort data is presented in Volume 2. Technical support was provided to all Division and Laboratories of Goddard's Space Sciences and Earth Sciences Directorates. Types of support include: scientific programming, systems programming, computer management, mission planning, scientific investigation, data analysis, data processing, data base creation and maintenance, instrumentation development, and management services. Mission and instruments supported include: ROSAT, Astro-D, BBXRT, XTE, AXAF, GRO, COBE, WIND, UIT, SMM, STIS, HEIDI, DE, URAP, CRRES, Voyagers, ISEE, San Marco, LAGEOS, TOPEX/Poseidon, Pioneer-Venus, Galileo, Cassini, Nimbus-7/TOMS, Meteor-3/TOMS, FIFE, BOREAS, TRMM, AVHRR, and Landsat. Accomplishments include: development of computing programs for mission science and data analysis, supercomputer applications support, computer network support, computational upgrades for data archival and analysis centers, end-to-end management for mission data flow, scientific modeling and results in the fields of space and Earth physics, planning and design of GSFC VO DAAC and VO IMS, fabrication, assembly, and testing of mission instrumentation, and design of mission operations center.

  20. Bringing Computational Thinking into the High School Science and Math Classroom

    NASA Astrophysics Data System (ADS)

    Trouille, Laura; Beheshti, E.; Horn, M.; Jona, K.; Kalogera, V.; Weintrop, D.; Wilensky, U.; University CT-STEM Project, Northwestern; University CenterTalent Development, Northwestern

    2013-01-01

    Computational thinking (for example, the thought processes involved in developing algorithmic solutions to problems that can then be automated for computation) has revolutionized the way we do science. The Next Generation Science Standards require that teachers support their students’ development of computational thinking and computational modeling skills. As a result, there is a very high demand among teachers for quality materials. Astronomy provides an abundance of opportunities to support student development of computational thinking skills. Our group has taken advantage of this to create a series of astronomy-based computational thinking lesson plans for use in typical physics, astronomy, and math high school classrooms. This project is funded by the NSF Computing Education for the 21st Century grant and is jointly led by Northwestern University’s Center for Interdisciplinary Exploration and Research in Astrophysics (CIERA), the Computer Science department, the Learning Sciences department, and the Office of STEM Education Partnerships (OSEP). I will also briefly present the online ‘Astro Adventures’ courses for middle and high school students I have developed through NU’s Center for Talent Development. The online courses take advantage of many of the amazing online astronomy enrichment materials available to the public, including a range of hands-on activities and the ability to take images with the Global Telescope Network. The course culminates with an independent computational research project.

  1. The CP-PACS parallel computer

    NASA Astrophysics Data System (ADS)

    Ukawa, Akira

    1998-05-01

    The CP-PACS computer is a massively parallel computer consisting of 2048 processing units and having a peak speed of 614 GFLOPS and 128 GByte of main memory. It was developed over the four years from 1992 to 1996 at the Center for Computational Physics, University of Tsukuba, for large-scale numerical simulations in computational physics, especially those of lattice QCD. The CP-PACS computer has been in full operation for physics computations since October 1996. In this article we describe the chronology of the development, the hardware and software characteristics of the computer, and its performance for lattice QCD simulations.

  2. ARC-1986-AC86-0746-2

    NASA Image and Video Library

    1986-10-10

    Ames Director William 'Bill' Ballhaus (center left) joins visitor Sir Jeffrey Pope from Royla Aircraft Industry, England (center right) at the NAS Facility Cray 2 computer with Ron Deiss, NAS Deputy Manager (L) and Vic Peterson, Ames Deputy Director (R).

  3. TREND 2000

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Educator Resource Center has created the Technology, Research, Education and Discovery (TREND) 2000 computer lab at NASA's John C. Stennis Space Center to facilitate the integration of technology into schools' curriculums by providing innovative and creative classroom strategies using state-of-the-art technology.

  4. Research Networks and Technology Migration (RESNETSII)

    DTIC Science & Technology

    2004-07-01

    Laboratory (LBNL), The International Computer Science Institute (ICSI) Center for Internet Research (ICIR) DARWIN Developing protocols and...degradation in network loss, delay and throughput AT&T Center for Internet Research at ICSI (ACIRI), AT&T Labs-Research, University Of Massachusetts

  5. Iceland: Eyjafjallajökull Volcano

    Atmospheric Science Data Center

    2013-04-17

    ... erroneous impression that they are below the land surface. A quantitative computer analysis is necessary to separate out wind and height. ... MD. The MISR data were obtained from the NASA Langley Research Center Atmospheric Science Data Center in Hampton, VA. Image ...

  6. Iceland: Eyjafjallajökull Volcano

    Atmospheric Science Data Center

    2013-04-17

    ... causes motion of the plume features between camera views. A quantitative computer analysis is necessary to separate out wind and height ... MD. The MISR data were obtained from the NASA Langley Research Center Atmospheric Science Data Center in Hampton, VA. Image ...

  7. 32 CFR 298.2 - Organization.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONUS), Alaska, Hawaii, and Puerto Rico; the Defense Industrial Security Clearance Office (DISCO), Columbus, Ohio; the Personnel Investigations Center (PIC) and National Computer Center (NCC) in Baltimore, Maryland; Office of Industrial Security International Europe (OISI-E), located in Brussels, Belgium with a...

  8. 32 CFR 298.2 - Organization.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONUS), Alaska, Hawaii, and Puerto Rico; the Defense Industrial Security Clearance Office (DISCO), Columbus, Ohio; the Personnel Investigations Center (PIC) and National Computer Center (NCC) in Baltimore, Maryland; Office of Industrial Security International Europe (OISI-E), located in Brussels, Belgium with a...

  9. 32 CFR 298.2 - Organization.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONUS), Alaska, Hawaii, and Puerto Rico; the Defense Industrial Security Clearance Office (DISCO), Columbus, Ohio; the Personnel Investigations Center (PIC) and National Computer Center (NCC) in Baltimore, Maryland; Office of Industrial Security International Europe (OISI-E), located in Brussels, Belgium with a...

  10. 32 CFR 298.2 - Organization.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONUS), Alaska, Hawaii, and Puerto Rico; the Defense Industrial Security Clearance Office (DISCO), Columbus, Ohio; the Personnel Investigations Center (PIC) and National Computer Center (NCC) in Baltimore, Maryland; Office of Industrial Security International Europe (OISI-E), located in Brussels, Belgium with a...

  11. 32 CFR 298.2 - Organization.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONUS), Alaska, Hawaii, and Puerto Rico; the Defense Industrial Security Clearance Office (DISCO), Columbus, Ohio; the Personnel Investigations Center (PIC) and National Computer Center (NCC) in Baltimore, Maryland; Office of Industrial Security International Europe (OISI-E), located in Brussels, Belgium with a...

  12. Dynamic provisioning of local and remote compute resources with OpenStack

    NASA Astrophysics Data System (ADS)

    Giffels, M.; Hauth, T.; Polgart, F.; Quast, G.

    2015-12-01

    Modern high-energy physics experiments rely on the extensive usage of computing resources, both for the reconstruction of measured events as well as for Monte-Carlo simulation. The Institut fur Experimentelle Kernphysik (EKP) at KIT is participating in both the CMS and Belle experiments with computing and storage resources. In the upcoming years, these requirements are expected to increase due to growing amount of recorded data and the rise in complexity of the simulated events. It is therefore essential to increase the available computing capabilities by tapping into all resource pools. At the EKP institute, powerful desktop machines are available to users. Due to the multi-core nature of modern CPUs, vast amounts of CPU time are not utilized by common desktop usage patterns. Other important providers of compute capabilities are classical HPC data centers at universities or national research centers. Due to the shared nature of these installations, the standardized software stack required by HEP applications cannot be installed. A viable way to overcome this constraint and offer a standardized software environment in a transparent manner is the usage of virtualization technologies. The OpenStack project has become a widely adopted solution to virtualize hardware and offer additional services like storage and virtual machine management. This contribution will report on the incorporation of the institute's desktop machines into a private OpenStack Cloud. The additional compute resources provisioned via the virtual machines have been used for Monte-Carlo simulation and data analysis. Furthermore, a concept to integrate shared, remote HPC centers into regular HEP job workflows will be presented. In this approach, local and remote resources are merged to form a uniform, virtual compute cluster with a single point-of-entry for the user. Evaluations of the performance and stability of this setup and operational experiences will be discussed.

  13. Final Report for "Implimentation and Evaluation of Multigrid Linear Solvers into Extended Magnetohydrodynamic Codes for Petascale Computing"

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Srinath Vadlamani; Scott Kruger; Travis Austin

    Extended magnetohydrodynamic (MHD) codes are used to model the large, slow-growing instabilities that are projected to limit the performance of International Thermonuclear Experimental Reactor (ITER). The multiscale nature of the extended MHD equations requires an implicit approach. The current linear solvers needed for the implicit algorithm scale poorly because the resultant matrices are so ill-conditioned. A new solver is needed, especially one that scales to the petascale. The most successful scalable parallel processor solvers to date are multigrid solvers. Applying multigrid techniques to a set of equations whose fundamental modes are dispersive waves is a promising solution to CEMM problems.more » For the Phase 1, we implemented multigrid preconditioners from the HYPRE project of the Center for Applied Scientific Computing at LLNL via PETSc of the DOE SciDAC TOPS for the real matrix systems of the extended MHD code NIMROD which is a one of the primary modeling codes of the OFES-funded Center for Extended Magnetohydrodynamic Modeling (CEMM) SciDAC. We implemented the multigrid solvers on the fusion test problem that allows for real matrix systems with success, and in the process learned about the details of NIMROD data structures and the difficulties of inverting NIMROD operators. The further success of this project will allow for efficient usage of future petascale computers at the National Leadership Facilities: Oak Ridge National Laboratory, Argonne National Laboratory, and National Energy Research Scientific Computing Center. The project will be a collaborative effort between computational plasma physicists and applied mathematicians at Tech-X Corporation, applied mathematicians Front Range Scientific Computations, Inc. (who are collaborators on the HYPRE project), and other computational plasma physicists involved with the CEMM project.« less

  14. Computer Simulation of an Electric Trolley Bus

    DOT National Transportation Integrated Search

    1979-12-01

    This report describes a computer model developed at the Transportation Systems Center (TSC) to simulate power/propulsion characteristics of an urban trolley bus. The work conducted in this area is sponsored by the Urban Mass Transportation Administra...

  15. EPA CHEMICAL PRIORITIZATION COMMUNITY OF PRACTICE.

    EPA Science Inventory

    IN 2005 THE NATIONAL CENTER FOR COMPUTATIONAL TOXICOLOGY (NCCT) ORGANIZED EPA CHEMICAL PRIORITIATION COMMUNITY OF PRACTICE (CPCP) TO PROVIDE A FORUM FOR DISCUSSING THE UTILITY OF COMPUTATIONAL CHEMISTRY, HIGH-THROUGHPUT SCREENIG (HTS) AND VARIOUS TOXICOGENOMIC TECHNOLOGIES FOR CH...

  16. Exploring Effective Decision Making through Human-Centered and Computational Intelligence Methods

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Han, Kyungsik; Cook, Kristin A.; Shih, Patrick C.

    Decision-making has long been studied to understand a psychological, cognitive, and social process of selecting an effective choice from alternative options. Its studies have been extended from a personal level to a group and collaborative level, and many computer-aided decision-making systems have been developed to help people make right decisions. There has been significant research growth in computational aspects of decision-making systems, yet comparatively little effort has existed in identifying and articulating user needs and requirements in assessing system outputs and the extent to which human judgments could be utilized for making accurate and reliable decisions. Our research focus ismore » decision-making through human-centered and computational intelligence methods in a collaborative environment, and the objectives of this position paper are to bring our research ideas to the workshop, and share and discuss ideas.« less

  17. Template Interfaces for Agile Parallel Data-Intensive Science

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ramakrishnan, Lavanya; Gunter, Daniel; Pastorello, Gilerto Z.

    Tigres provides a programming library to compose and execute large-scale data-intensive scientific workflows from desktops to supercomputers. DOE User Facilities and large science collaborations are increasingly generating large enough data sets that it is no longer practical to download them to a desktop to operate on them. They are instead stored at centralized compute and storage resources such as high performance computing (HPC) centers. Analysis of this data requires an ability to run on these facilities, but with current technologies, scaling an analysis to an HPC center and to a large data set is difficult even for experts. Tigres ismore » addressing the challenge of enabling collaborative analysis of DOE Science data through a new concept of reusable "templates" that enable scientists to easily compose, run and manage collaborative computational tasks. These templates define common computation patterns used in analyzing a data set.« less

  18. Design and deployment of an elastic network test-bed in IHEP data center based on SDN

    NASA Astrophysics Data System (ADS)

    Zeng, Shan; Qi, Fazhi; Chen, Gang

    2017-10-01

    High energy physics experiments produce huge amounts of raw data, while because of the sharing characteristics of the network resources, there is no guarantee of the available bandwidth for each experiment which may cause link congestion problems. On the other side, with the development of cloud computing technologies, IHEP have established a cloud platform based on OpenStack which can ensure the flexibility of the computing and storage resources, and more and more computing applications have been deployed on virtual machines established by OpenStack. However, under the traditional network architecture, network capability can’t be required elastically, which becomes the bottleneck of restricting the flexible application of cloud computing. In order to solve the above problems, we propose an elastic cloud data center network architecture based on SDN, and we also design a high performance controller cluster based on OpenDaylight. In the end, we present our current test results.

  19. LTSS compendium: an introduction to the CDC 7600 and the Livermore Timesharing System

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fong, K. W.

    1977-08-15

    This report is an introduction to the CDC 7600 computer and to the Livermore Timesharing System (LTSS) used by the National Magnetic Fusion Energy Computer Center (NMFECC) and the Lawrence Livermore Laboratory Computer Center (LLLCC or Octopus network) on their 7600's. This report is based on a document originally written specifically about the system as it is implemented at NMFECC but has been broadened to point out differences in implementation at LLLCC. It also contains information about LLLCC not relevant to NMFECC. This report is written for computational physicists who want to prepare large production codes to run under LTSSmore » on the 7600's. The generalized discussion of the operating system focuses on creating and executing controllees. This document and its companion, UCID-17557, CDC 7600 LTSS Programming Stratagems, provide a basis for understanding more specialized documents about individual parts of the system.« less

  20. Diabat Interpolation for Polymorph Free-Energy Differences.

    PubMed

    Kamat, Kartik; Peters, Baron

    2017-02-02

    Existing methods to compute free-energy differences between polymorphs use harmonic approximations, advanced non-Boltzmann bias sampling techniques, and/or multistage free-energy perturbations. This work demonstrates how Bennett's diabat interpolation method ( J. Comput. Phys. 1976, 22, 245 ) can be combined with energy gaps from lattice-switch Monte Carlo techniques ( Phys. Rev. E 2000, 61, 906 ) to swiftly estimate polymorph free-energy differences. The new method requires only two unbiased molecular dynamics simulations, one for each polymorph. To illustrate the new method, we compute the free-energy difference between face-centered cubic and body-centered cubic polymorphs for a Gaussian core solid. We discuss the justification for parabolic models of the free-energy diabats and similarities to methods that have been used in studies of electron transfer.

  1. The growth of the UniTree mass storage system at the NASA Center for Computational Sciences

    NASA Technical Reports Server (NTRS)

    Tarshish, Adina; Salmon, Ellen

    1993-01-01

    In October 1992, the NASA Center for Computational Sciences made its Convex-based UniTree system generally available to users. The ensuing months saw the growth of near-online data from nil to nearly three terabytes, a doubling of the number of CPU's on the facility's Cray YMP (the primary data source for UniTree), and the necessity for an aggressive regimen for repacking sparse tapes and hierarchical 'vaulting' of old files to freestanding tape. Connectivity was enhanced as well with the addition of UltraNet HiPPI. This paper describes the increasing demands placed on the storage system's performance and throughput that resulted from the significant augmentation of compute-server processor power and network speed.

  2. Computer program for determining mass properties of a rigid structure

    NASA Technical Reports Server (NTRS)

    Hull, R. A.; Gilbert, J. L.; Klich, P. J.

    1978-01-01

    A computer program was developed for the rapid computation of the mass properties of complex structural systems. The program uses rigid body analyses and permits differences in structural material throughout the total system. It is based on the premise that complex systems can be adequately described by a combination of basic elemental shapes. Simple geometric data describing size and location of each element and the respective material density or weight of each element were the only required input data. From this minimum input, the program yields system weight, center of gravity, moments of inertia and products of inertia with respect to mutually perpendicular axes through the system center of gravity. The program also yields mass properties of the individual shapes relative to component axes.

  3. System Analysis for the Huntsville Operation Support Center, Distributed Computer System

    NASA Technical Reports Server (NTRS)

    Ingels, F. M.; Massey, D.

    1985-01-01

    HOSC as a distributed computing system, is responsible for data acquisition and analysis during Space Shuttle operations. HOSC also provides computing services for Marshall Space Flight Center's nonmission activities. As mission and nonmission activities change, so do the support functions of HOSC change, demonstrating the need for some method of simulating activity at HOSC in various configurations. The simulation developed in this work primarily models the HYPERchannel network. The model simulates the activity of a steady state network, reporting statistics such as, transmitted bits, collision statistics, frame sequences transmitted, and average message delay. These statistics are used to evaluate such performance indicators as throughout, utilization, and delay. Thus the overall performance of the network is evaluated, as well as predicting possible overload conditions.

  4. Laser Spot Detection Based on Reaction Diffusion.

    PubMed

    Vázquez-Otero, Alejandro; Khikhlukha, Danila; Solano-Altamirano, J M; Dormido, Raquel; Duro, Natividad

    2016-03-01

    Center-location of a laser spot is a problem of interest when the laser is used for processing and performing measurements. Measurement quality depends on correctly determining the location of the laser spot. Hence, improving and proposing algorithms for the correct location of the spots are fundamental issues in laser-based measurements. In this paper we introduce a Reaction Diffusion (RD) system as the main computational framework for robustly finding laser spot centers. The method presented is compared with a conventional approach for locating laser spots, and the experimental results indicate that RD-based computation generates reliable and precise solutions. These results confirm the flexibility of the new computational paradigm based on RD systems for addressing problems that can be reduced to a set of geometric operations.

  5. Computing In College and University: 1978 and Beyond. Proceedings of the Gerard P. Weeg Memorial Conference, May 1-2, 1978.

    ERIC Educational Resources Information Center

    Iowa Univ., Iowa City. Computer Center.

    In most instances, the papers in this collection present information reflecting the current status of computer usage in education and offer substantive forecasts for academic computing. Two speeches from the special ceremony for the renaming of the computing center in honor of Gerard P. Weeg, which was held as part of the two-day national computer…

  6. Computational structural mechanics methods research using an evolving framework

    NASA Technical Reports Server (NTRS)

    Knight, N. F., Jr.; Lotts, C. G.; Gillian, R. E.

    1990-01-01

    Advanced structural analysis and computational methods that exploit high-performance computers are being developed in a computational structural mechanics research activity sponsored by the NASA Langley Research Center. These new methods are developed in an evolving framework and applied to representative complex structural analysis problems from the aerospace industry. An overview of the methods development environment is presented, and methods research areas are described. Selected application studies are also summarized.

  7. Computational Toxicology as Implemented by the US EPA ...

    EPA Pesticide Factsheets

    Computational toxicology is the application of mathematical and computer models to help assess chemical hazards and risks to human health and the environment. Supported by advances in informatics, high-throughput screening (HTS) technologies, and systems biology, the U.S. Environmental Protection Agency EPA is developing robust and flexible computational tools that can be applied to the thousands of chemicals in commerce, and contaminant mixtures found in air, water, and hazardous-waste sites. The Office of Research and Development (ORD) Computational Toxicology Research Program (CTRP) is composed of three main elements. The largest component is the National Center for Computational Toxicology (NCCT), which was established in 2005 to coordinate research on chemical screening and prioritization, informatics, and systems modeling. The second element consists of related activities in the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL). The third and final component consists of academic centers working on various aspects of computational toxicology and funded by the U.S. EPA Science to Achieve Results (STAR) program. Together these elements form the key components in the implementation of both the initial strategy, A Framework for a Computational Toxicology Research Program (U.S. EPA, 2003), and the newly released The U.S. Environmental Protection Agency's Strategic Plan for Evaluating the T

  8. Some propulsion system noise data handling conventions and computer programs used at the Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Montegani, F. J.

    1974-01-01

    Methods of handling one-third-octave band noise data originating from the outdoor full-scale fan noise facility and the engine acoustic facility at the Lewis Research Center are presented. Procedures for standardizing, retrieving, extrapolating, and reporting these data are explained. Computer programs are given which are used to accomplish these and other noise data analysis tasks. This information is useful as background for interpretation of data from these facilities appearing in NASA reports and can aid data exchange by promoting standardization.

  9. Human Factors Model

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Jack is an advanced human factors software package that provides a three dimensional model for predicting how a human will interact with a given system or environment. It can be used for a broad range of computer-aided design applications. Jack was developed by the computer Graphics Research Laboratory of the University of Pennsylvania with assistance from NASA's Johnson Space Center, Ames Research Center and the Army. It is the University's first commercial product. Jack is still used for academic purposes at the University of Pennsylvania. Commercial rights were given to Transom Technologies, Inc.

  10. The Future is Hera! Analyzing Astronomical Over the Internet

    NASA Technical Reports Server (NTRS)

    Valencic, L. A.; Chai, P.; Pence, W.; Shafer, R.; Snowden, S.

    2008-01-01

    Hera is the data processing facility provided by the High Energy Astrophysics Science Archive Research Center (HEASARC) at the NASA Goddard Space Flight Center for analyzing astronomical data. Hera provides all the pre-installed software packages, local disk space, and computing resources need to do general processing of FITS format data files residing on the users local computer, and to do research using the publicly available data from the High ENergy Astrophysics Division. Qualified students, educators and researchers may freely use the Hera services over the internet of research and educational purposes.

  11. Evolving Storage and Cyber Infrastructure at the NASA Center for Climate Simulation

    NASA Technical Reports Server (NTRS)

    Salmon, Ellen; Duffy, Daniel; Spear, Carrie; Sinno, Scott; Vaughan, Garrison; Bowen, Michael

    2018-01-01

    This talk will describe recent developments at the NASA Center for Climate Simulation, which is funded by NASAs Science Mission Directorate, and supports the specialized data storage and computational needs of weather, ocean, and climate researchers, as well as astrophysicists, heliophysicists, and planetary scientists. To meet requirements for higher-resolution, higher-fidelity simulations, the NCCS augments its High Performance Computing (HPC) and storage retrieval environment. As the petabytes of model and observational data grow, the NCCS is broadening data services offerings and deploying and expanding virtualization resources for high performance analytics.

  12. Dynamic Voltage Frequency Scaling Simulator for Real Workflows Energy-Aware Management in Green Cloud Computing

    PubMed Central

    Cotes-Ruiz, Iván Tomás; Prado, Rocío P.; García-Galán, Sebastián; Muñoz-Expósito, José Enrique; Ruiz-Reyes, Nicolás

    2017-01-01

    Nowadays, the growing computational capabilities of Cloud systems rely on the reduction of the consumed power of their data centers to make them sustainable and economically profitable. The efficient management of computing resources is at the heart of any energy-aware data center and of special relevance is the adaptation of its performance to workload. Intensive computing applications in diverse areas of science generate complex workload called workflows, whose successful management in terms of energy saving is still at its beginning. WorkflowSim is currently one of the most advanced simulators for research on workflows processing, offering advanced features such as task clustering and failure policies. In this work, an expected power-aware extension of WorkflowSim is presented. This new tool integrates a power model based on a computing-plus-communication design to allow the optimization of new management strategies in energy saving considering computing, reconfiguration and networks costs as well as quality of service, and it incorporates the preeminent strategy for on host energy saving: Dynamic Voltage Frequency Scaling (DVFS). The simulator is designed to be consistent in different real scenarios and to include a wide repertory of DVFS governors. Results showing the validity of the simulator in terms of resources utilization, frequency and voltage scaling, power, energy and time saving are presented. Also, results achieved by the intra-host DVFS strategy with different governors are compared to those of the data center using a recent and successful DVFS-based inter-host scheduling strategy as overlapped mechanism to the DVFS intra-host technique. PMID:28085932

  13. Dynamic Voltage Frequency Scaling Simulator for Real Workflows Energy-Aware Management in Green Cloud Computing.

    PubMed

    Cotes-Ruiz, Iván Tomás; Prado, Rocío P; García-Galán, Sebastián; Muñoz-Expósito, José Enrique; Ruiz-Reyes, Nicolás

    2017-01-01

    Nowadays, the growing computational capabilities of Cloud systems rely on the reduction of the consumed power of their data centers to make them sustainable and economically profitable. The efficient management of computing resources is at the heart of any energy-aware data center and of special relevance is the adaptation of its performance to workload. Intensive computing applications in diverse areas of science generate complex workload called workflows, whose successful management in terms of energy saving is still at its beginning. WorkflowSim is currently one of the most advanced simulators for research on workflows processing, offering advanced features such as task clustering and failure policies. In this work, an expected power-aware extension of WorkflowSim is presented. This new tool integrates a power model based on a computing-plus-communication design to allow the optimization of new management strategies in energy saving considering computing, reconfiguration and networks costs as well as quality of service, and it incorporates the preeminent strategy for on host energy saving: Dynamic Voltage Frequency Scaling (DVFS). The simulator is designed to be consistent in different real scenarios and to include a wide repertory of DVFS governors. Results showing the validity of the simulator in terms of resources utilization, frequency and voltage scaling, power, energy and time saving are presented. Also, results achieved by the intra-host DVFS strategy with different governors are compared to those of the data center using a recent and successful DVFS-based inter-host scheduling strategy as overlapped mechanism to the DVFS intra-host technique.

  14. NASA Marshall Space Flight Center solar observatory

    NASA Technical Reports Server (NTRS)

    Smith, James E.

    1988-01-01

    A description is provided of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and a summary is given of its observations and data reduction during Jan. to Mar. 1988. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer center. The data are represented by longitudinal contours with azimuth plots.

  15. Bird Vision System

    NASA Technical Reports Server (NTRS)

    2008-01-01

    The Bird Vision system is a multicamera photogrammerty software application that runs on a Microsoft Windows XP platform and was developed at Kennedy Space Center by ASRC Aerospace. This software system collects data about the locations of birds within a volume centered on the Space Shuttle and transmits it in real time to the laptop computer of a test director in the Launch Control Center (LCC) Firing Room.

  16. Human Systems Center Products and Progress.

    DTIC Science & Technology

    1993-10-01

    and (CASHE:PVS). CASHE:PVS version 1.0 is a CD-ROM- As a precursor to developing collaborative based hypermedia- ergonomic information base design...computer-generated image to determine if the Crew System Ergonomics Information Analysis activity is physically possible. Expert system Center known as...and facility issues relative Federal Drug Administration, and Centers for to dentistry . The scope includes technical Disease Control to establish

  17. Technology Readiness Assessment (TRA) Deskbook

    DTIC Science & Technology

    2009-07-01

    Document CDER Center for Drug Evaluation and Research CDR Critical Design Review CDRH Center for Devices and Radiologic Health CFD computational fluid...gational Device Exemption (IDE) meeting is held with Center for Devices and Radiological Health ( CDRH ) for proposed Class III devices, and the IDE...is prepared and submitted to CDRH . For a 510(k), determine substantially equivalent devices and their classification, validate func- tioning model

  18. Distributing Data to Hand-Held Devices in a Wireless Network

    NASA Technical Reports Server (NTRS)

    Hodges, Mark; Simmons, Layne

    2008-01-01

    ADROIT is a developmental computer program for real-time distribution of complex data streams for display on Web-enabled, portable terminals held by members of an operational team of a spacecraft-command-and-control center who may be located away from the center. Examples of such terminals include personal data assistants, laptop computers, and cellular telephones. ADROIT would make it unnecessary to equip each terminal with platform- specific software for access to the data streams or with software that implements the information-sharing protocol used to deliver telemetry data to clients in the center. ADROIT is a combination of middleware plus software specific to the center. (Middleware enables one application program to communicate with another by performing such functions as conversion, translation, consolidation, and/or integration.) ADROIT translates a data stream (voice, video, or alphanumerical data) from the center into Extensible Markup Language, effectuates a subscription process to determine who gets what data when, and presents the data to each user in real time. Thus, ADROIT is expected to enable distribution of operations and to reduce the cost of operations by reducing the number of persons required to be in the center.

  19. Institute for Computational Mechanics in Propulsion (ICOMP)

    NASA Technical Reports Server (NTRS)

    Feiler, Charles E. (Editor)

    1994-01-01

    The Institute for Computational Mechanics in Propulsion (ICOMP) is operated by the Ohio Aerospace Institute (OAI) and the NASA Lewis Research Center in Cleveland, Ohio. The purpose of ICOMP is to develop techniques to improve problem-solving capabilities in all aspects of computational mechanics related to propulsion. This report describes the accomplishments and activities at ICOMP during 1993.

  20. A Quantitative Risk Analysis Framework for Evaluating and Monitoring Operational Reliability of Cloud Computing

    ERIC Educational Resources Information Center

    Islam, Muhammad Faysal

    2013-01-01

    Cloud computing offers the advantage of on-demand, reliable and cost efficient computing solutions without the capital investment and management resources to build and maintain in-house data centers and network infrastructures. Scalability of cloud solutions enable consumers to upgrade or downsize their services as needed. In a cloud environment,…

  1. High Performance Computing (HPC) Innovation Service Portal Pilots Cloud Computing (HPC-ISP Pilot Cloud Computing)

    DTIC Science & Technology

    2011-08-01

    5 Figure 4 Architetural diagram of running Blender on Amazon EC2 through Nimbis...classification of streaming data. Example input images (top left). All digit prototypes (cluster centers) found, with size proportional to frequency (top...Figure 4 Architetural diagram of running Blender on Amazon EC2 through Nimbis 1 http

  2. Computer-Assisted Performance Evaluation for Navy Anti-Air Warfare Training: Concepts, Methods, and Constraints.

    ERIC Educational Resources Information Center

    Chesler, David J.

    An improved general methodological approach for the development of computer-assisted evaluation of trainee performance in the computer-based simulation environment is formulated in this report. The report focuses on the Tactical Advanced Combat Direction and Electronic Warfare system (TACDEW) at the Fleet Anti-Air Warfare Training Center at San…

  3. Today's Revolution: Computers in Education. Proceedings of the Association for Educational Data Systems International Convention (Phoenix, Arizona, May 3-7, 1976).

    ERIC Educational Resources Information Center

    Association for Educational Data Systems, Washington, DC.

    The theme of the 1976 convention of the Association for Educational Data Systems (AEDS) was educational data processing and information systems. Special attention was focused on educational management information systems, computer centers and networks, computer assisted instruction, computerized testing, guidance, and higher education. This…

  4. User Centered System Design: Papers for the CHI '83 Conference on Human Factors in Computer Systems.

    ERIC Educational Resources Information Center

    California Univ., San Diego. Center for Human Information Processing.

    Four papers from the University of California at San Diego (UCSD) Project on Human-Computer Interfaces are presented in this report. "Evaluation and Analysis of User's Activity Organization," by Liam Bannon, Allen Cypher, Steven Greenspan, and Melissa Monty, analyzes the activities performed by users of computer systems, develops a…

  5. Campus Computing 1990: The EDUCOM/USC Survey of Desktop Computing in Higher Education.

    ERIC Educational Resources Information Center

    Green, Kenneth C.; Eastman, Skip

    The National Survey of Desktop Computer Use in Higher Education was conducted in the spring and summer of 1990 by the Center for Scholarly Technology at the University of Southern California, in cooperation with EDUCOM and with support from 15 corporate sponsors. The survey was designed to collect information about campus planning, policies, and…

  6. PEO Integration Acronym Book

    DTIC Science & Technology

    2011-02-01

    Command CASE Computer Aided Software Engineering CASEVAC Casualty Evacuation CASTFOREM Combined Arms And Support Task Force Evaluation Model CAT Center For...Advanced Technologies CAT Civil Affairs Team CAT Combined Arms Training CAT Crew Integration CAT Crisis Action Team CATIA Computer-Aided Three...Dimensional Interactive Application CATOX Catalytic Oxidation CATS Combined Arms Training Strategy CATT Combined Arms Tactical Trainer CATT Computer

  7. Oklahoma Center for High Energy Physics (OCHEP)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nandi, S; Strauss, M J; Snow, J

    2012-02-29

    The DOE EPSCoR implementation grant, with the support from the State of Oklahoma and from the three universities, Oklahoma State University, University of Oklahoma and Langston University, resulted in establishing of the Oklahoma Center for High Energy Physics (OCHEP) in 2004. Currently, OCHEP continues to flourish as a vibrant hub for research in experimental and theoretical particle physics and an educational center in the State of Oklahoma. All goals of the original proposal were successfully accomplished. These include foun- dation of a new experimental particle physics group at OSU, the establishment of a Tier 2 computing facility for the Largemore » Hadron Collider (LHC) and Tevatron data analysis at OU and organization of a vital particle physics research center in Oklahoma based on resources of the three universities. OSU has hired two tenure-track faculty members with initial support from the grant funds. Now both positions are supported through OSU budget. This new HEP Experimental Group at OSU has established itself as a full member of the Fermilab D0 Collaboration and LHC ATLAS Experiment and has secured external funds from the DOE and the NSF. These funds currently support 2 graduate students, 1 postdoctoral fellow, and 1 part-time engineer. The grant initiated creation of a Tier 2 computing facility at OU as part of the Southwest Tier 2 facility, and a permanent Research Scientist was hired at OU to maintain and run the facility. Permanent support for this position has now been provided through the OU university budget. OCHEP represents a successful model of cooperation of several universities, providing the establishment of critical mass of manpower, computing and hardware resources. This led to increasing Oklahoma's impact in all areas of HEP, theory, experiment, and computation. The Center personnel are involved in cutting edge research in experimental, theoretical, and computational aspects of High Energy Physics with the research areas ranging from the search for new phenomena at the Fermilab Tevatron and the CERN Large Hadron Collider to theoretical modeling, computer simulation, detector development and testing, and physics analysis. OCHEP faculty members participating on the D0 collaboration at the Fermilab Tevatron and on the ATLAS collaboration at the CERN LHC have made major impact on the Standard Model (SM) Higgs boson search, top quark studies, B physics studies, and measurements of Quantum Chromodynamics (QCD) phenomena. The OCHEP Grid computing facility consists of a large computer cluster which is playing a major role in data analysis and Monte Carlo productions for both the D0 and ATLAS experiments. Theoretical efforts are devoted to new ideas in Higgs bosons physics, extra dimensions, neutrino masses and oscillations, Grand Unified Theories, supersymmetric models, dark matter, and nonperturbative quantum field theory. Theory members are making major contributions to the understanding of phenomena being explored at the Tevatron and the LHC. They have proposed new models for Higgs bosons, and have suggested new signals for extra dimensions, and for the search of supersymmetric particles. During the seven year period when OCHEP was partially funded through the DOE EPSCoR implementation grant, OCHEP members published over 500 refereed journal articles and made over 200 invited presentations at major conferences. The Center is also involved in education and outreach activities by offering summer research programs for high school teachers and college students, and organizing summer workshops for high school teachers, sometimes coordinating with the Quarknet programs at OSU and OU. The details of the Center can be found in http://ochep.phy.okstate.edu.« less

  8. The U.S. "Tox21 Community" and the Future of Toxicology

    EPA Science Inventory

    In early 2008, the National Institute of Environmental Health Sciences/National Toxicology Program, the NIH Chemical Genomics Center, and the Environmental Protection Agency’s National Center for Computational Toxicology entered into a Memorandum of Understanding to collaborate o...

  9. 26 CFR 301.7514-1 - Seals of office.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... District Director for: Arkansas-Oklahoma District (Oklahoma City) Brooklyn District Central California...) Upstate New York District (Buffalo) Virginia-West Virginia District (Richmond) Office of Director of Computing Centers in: Detroit Memphis Martinsburg Office of Director of Submission Processing Centers in...

  10. Computing the absorption of sound by the atmosphere and its applicability to aircraft noise certification

    DOT National Transportation Integrated Search

    1998-08-01

    The United States Department of Transportation, John A. Volpe National Transportation Systems : Center (Volpe Center), Acoustics Facility, in support of the Federal Aviation Administrations : Office of Environment and Energy (AEE), has recently co...

  11. HNM, heliport noise model : version 2.2 user's guide

    DOT National Transportation Integrated Search

    1994-02-01

    The John A. Volpe National Transportation Systems Center (Volpe Center), in support of : the Federal Aviation Administration, Office of Environment and Energy, has developed : Version 2.2 of the Heliport Noise Model (HNM). The HNM is a computer progr...

  12. Proceedings: Computer Science and Data Systems Technical Symposium, volume 2

    NASA Technical Reports Server (NTRS)

    Larsen, Ronald L.; Wallgren, Kenneth

    1985-01-01

    Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form, along with abstracts, are included for topics in three catagories: computer science, data systems, and space station applications.

  13. EPAS TOXCAST PROGRAM FOR PREDICTING HAZARD AND PRIORITIZING TOXICITY TESTING OF ENVIRONMENTAL CHEMICALS(S).

    EPA Science Inventory

    EPAs National Center for Computational Toxicology is developing methods that apply computational chemistry, high-throughput screening (HTS) and genomic technologies to predict potential toxicity and prioritize the use of limited testing resources.

  14. Parallel Computing:. Some Activities in High Energy Physics

    NASA Astrophysics Data System (ADS)

    Willers, Ian

    This paper examines some activities in High Energy Physics that utilise parallel computing. The topic includes all computing from the proposed SIMD front end detectors, the farming applications, high-powered RISC processors and the large machines in the computer centers. We start by looking at the motivation behind using parallelism for general purpose computing. The developments around farming are then described from its simplest form to the more complex system in Fermilab. Finally, there is a list of some developments that are happening close to the experiments.

  15. Workshop on Computational Turbulence Modeling

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This document contains presentations given at Workshop on Computational Turbulence Modeling held 15-16 Sep. 1993. The purpose of the meeting was to discuss the current status and future development of turbulence modeling in computational fluid dynamics for aerospace propulsion systems. Papers cover the following topics: turbulence modeling activities at the Center for Modeling of Turbulence and Transition (CMOTT); heat transfer and turbomachinery flow physics; aerothermochemistry and computational methods for space systems; computational fluid dynamics and the k-epsilon turbulence model; propulsion systems; and inlet, duct, and nozzle flow.

  16. NASA Langley Research Center outreach in astronautical education

    NASA Technical Reports Server (NTRS)

    Duberg, J. E.

    1976-01-01

    The Langley Research Center has traditionally maintained an active relationship with the academic community, especially at the graduate level, to promote the Center's research program and to make graduate education available to its staff. Two new institutes at the Center - the Joint Institute for Acoustics and Flight Sciences, and the Institute for Computer Applications - are discussed. Both provide for research activity at the Center by university faculties. The American Society of Engineering Education Summer Faculty Fellowship Program and the NASA-NRC Postdoctoral Resident Research Associateship Program are also discussed.

  17. NASA Shared Services Center breaks ground

    NASA Image and Video Library

    2006-02-24

    NASA officials and elected leaders were on hand for the groundbreaking ceremony of the NASA Shared Services Center Feb. 24, 2006, on the grounds of Stennis Space Center. The NSSC provides agency centralized administrative processing, human resources, procurement and financial services. From left, Louisiana Economic Development Secretary Mike Olivier, Stennis Space Center Director Rick Gilbrech, Computer Sciences Corp. President Michael Laphen, NASA Deputy Administrator Shana Dale, Rep. Gene Taylor, Sen. Trent Lott, Mississippi Gov. Haley Barbour, NASA Administrator Mike Griffin and Shared Services Center Executive Director Arbuthnot use golden shovels to break ground at the site.

  18. NASA Shared Services Center breaks ground

    NASA Technical Reports Server (NTRS)

    2006-01-01

    NASA officials and elected leaders were on hand for the groundbreaking ceremony of the NASA Shared Services Center Feb. 24, 2006, on the grounds of Stennis Space Center. The NSSC provides agency centralized administrative processing, human resources, procurement and financial services. From left, Louisiana Economic Development Secretary Mike Olivier, Stennis Space Center Director Rick Gilbrech, Computer Sciences Corp. President Michael Laphen, NASA Deputy Administrator Shana Dale, Rep. Gene Taylor, Sen. Trent Lott, Mississippi Gov. Haley Barbour, NASA Administrator Mike Griffin and Shared Services Center Executive Director Arbuthnot use golden shovels to break ground at the site.

  19. Vibroacoustic Payload Environment Prediction System (VAPEPS): VAPEPS management center remote access guide

    NASA Technical Reports Server (NTRS)

    Fernandez, J. P.; Mills, D.

    1991-01-01

    A Vibroacoustic Payload Environment Prediction System (VAPEPS) Management Center was established at the JPL. The center utilizes the VAPEPS software package to manage a data base of Space Shuttle and expendable launch vehicle payload flight and ground test data. Remote terminal access over telephone lines to the computer system, where the program resides, was established to provide the payload community a convenient means of querying the global VAPEPS data base. This guide describes the functions of the VAPEPS Management Center and contains instructions for utilizing the resources of the center.

  20. CAD/CAE Integration Enhanced by New CAD Services Standard

    NASA Technical Reports Server (NTRS)

    Claus, Russell W.

    2002-01-01

    A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

  1. Kepler Science Operations Center Architecture

    NASA Technical Reports Server (NTRS)

    Middour, Christopher; Klaus, Todd; Jenkins, Jon; Pletcher, David; Cote, Miles; Chandrasekaran, Hema; Wohler, Bill; Girouard, Forrest; Gunter, Jay P.; Uddin, Kamal; hide

    2010-01-01

    We give an overview of the operational concepts and architecture of the Kepler Science Data Pipeline. Designed, developed, operated, and maintained by the Science Operations Center (SOC) at NASA Ames Research Center, the Kepler Science Data Pipeline is central element of the Kepler Ground Data System. The SOC charter is to analyze stellar photometric data from the Kepler spacecraft and report results to the Kepler Science Office for further analysis. We describe how this is accomplished via the Kepler Science Data Pipeline, including the hardware infrastructure, scientific algorithms, and operational procedures. The SOC consists of an office at Ames Research Center, software development and operations departments, and a data center that hosts the computers required to perform data analysis. We discuss the high-performance, parallel computing software modules of the Kepler Science Data Pipeline that perform transit photometry, pixel-level calibration, systematic error-correction, attitude determination, stellar target management, and instrument characterization. We explain how data processing environments are divided to support operational processing and test needs. We explain the operational timelines for data processing and the data constructs that flow into the Kepler Science Data Pipeline.

  2. Binary Black Hole Mergers, Gravitational Waves, and LISA

    NASA Astrophysics Data System (ADS)

    Centrella, Joan; Baker, J.; Boggs, W.; Kelly, B.; McWilliams, S.; van Meter, J.

    2007-12-01

    The final merger of comparable mass binary black holes is expected to be the strongest source of gravitational waves for LISA. Since these mergers take place in regions of extreme gravity, we need to solve Einstein's equations of general relativity on a computer in order to calculate these waveforms. For more than 30 years, scientists have tried to compute black hole mergers using the methods of numerical relativity. The resulting computer codes have been plagued by instabilities, causing them to crash well before the black holes in the binary could complete even a single orbit. Within the past few years, however, this situation has changed dramatically, with a series of remarkable breakthroughs. We will present the results of new simulations of black hole mergers with unequal masses and spins, focusing on the gravitational waves emitted and the accompanying astrophysical "kicks.” The magnitude of these kicks has bearing on the production and growth of supermassive blackholes during the epoch of structure formation, and on the retention of black holes in stellar clusters. This work was supported by NASA grant 06-BEFS06-19, and the simulations were carried out using Project Columbia at the NASA Advanced Supercomputing Division (Ames Research Center) and at the NASA Center for Computational Sciences (Goddard Space Flight Center).

  3. Inclusive Schools. Topical Bibliography on Inclusive Schools.

    ERIC Educational Resources Information Center

    Sorenson, Barbara, Comp.; Drill, Janet, Comp.

    This abstract bibliography of approximately 200 references looks at various aspects of inclusive schools. References are a result of computer searches of three databases: the Educational Resources Information Center (ERIC), Exceptional Child Education Resources, and the Western Regional Resources Center. Preliminary information includes directions…

  4. The Theme's The Thing!

    ERIC Educational Resources Information Center

    Zaidel, Lisa Brusman

    1991-01-01

    Presents suggestions to help elementary teachers organize learning centers and activities around the themes of Peter Rabbit (Grade 1), weather (Grade 3), and bees (Grade 5). Suggestions are given for activities in centers for listening/reading, language arts, computers, math, science, cooperative learning, research, and writing. (SM)

  5. VIEW OF COMPUTER/DATA COLLECTION AREA, SOUTH OF FIRING ROOM NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF COMPUTER/DATA COLLECTION AREA, SOUTH OF FIRING ROOM NO. 3, FACING SOUTHEAST - Cape Canaveral Air Force Station, Launch Complex 39, Launch Control Center, LCC Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

  6. ExpoCast: Exposure Science for Prioritization and Toxicity Testing (T)

    EPA Science Inventory

    The US EPA National Center for Computational Toxicology (NCCT) has a mission to integrate modern computing and information technology with molecular biology to improve Agency prioritization of data requirements and risk assessment of chemicals. Recognizing the critical need for ...

  7. The Future of School Library Media Centers.

    ERIC Educational Resources Information Center

    Craver, Kathleen W.

    1984-01-01

    Examines impact of technology on school library media program development and role of school librarian. Technological trends (computerized record keeping, computer-assisted instruction, networking, home computers, videodiscs), employment and economic trends, education of school librarians, social and behavioral trends, and organizational and…

  8. New Toxico-Cheminformatics & Computational Toxicology Initiatives At EPA

    EPA Science Inventory

    EPA’s National Center for Computational Toxicology is building capabilities to support a new paradigm for toxicity screening and prediction. The DSSTox project is improving public access to quality structure-annotated chemical toxicity information in less summarized forms than tr...

  9. Research Institute for Advanced Computer Science: Annual Report October 1998 through September 1999

    NASA Technical Reports Server (NTRS)

    Leiner, Barry M.; Gross, Anthony R. (Technical Monitor)

    1999-01-01

    The Research Institute for Advanced Computer Science (RIACS) carries out basic research and technology development in computer science, in support of the National Aeronautics and Space Administration's missions. RIACS is located at the NASA Ames Research Center (ARC). It currently operates under a multiple year grant/cooperative agreement that began on October 1, 1997 and is up for renewal in the year 2002. ARC has been designated NASA's Center of Excellence in Information Technology. In this capacity, ARC is charged with the responsibility to build an Information Technology Research Program that is preeminent within NASA. RIACS serves as a bridge between NASA ARC and the academic community, and RIACS scientists and visitors work in close collaboration with NASA scientists. RIACS has the additional goal of broadening the base of researchers in these areas of importance to the nation's space and aeronautics enterprises. RIACS research focuses on the three cornerstones of information technology research necessary to meet the future challenges of NASA missions: (1) Automated Reasoning for Autonomous Systems. Techniques are being developed enabling spacecraft that will be self-guiding and self-correcting to the extent that they will require little or no human intervention. Such craft will be equipped to independently solve problems as they arise, and fulfill their missions with minimum direction from Earth. (2) Human-Centered Computing. Many NASA missions require synergy between humans and computers, with sophisticated computational aids amplifying human cognitive and perceptual abilities; (3) High Performance Computing and Networking Advances in the performance of computing and networking continue to have major impact on a variety of NASA endeavors, ranging from modeling and simulation to data analysis of large datasets to collaborative engineering, planning and execution. In addition, RIACS collaborates with NASA scientists to apply information technology research to a variety of NASA application domains. RIACS also engages in other activities, such as workshops, seminars, and visiting scientist programs, designed to encourage and facilitate collaboration between the university and NASA information technology research communities.

  10. Research Institute for Advanced Computer Science

    NASA Technical Reports Server (NTRS)

    Gross, Anthony R. (Technical Monitor); Leiner, Barry M.

    2000-01-01

    The Research Institute for Advanced Computer Science (RIACS) carries out basic research and technology development in computer science, in support of the National Aeronautics and Space Administration's missions. RIACS is located at the NASA Ames Research Center. It currently operates under a multiple year grant/cooperative agreement that began on October 1, 1997 and is up for renewal in the year 2002. Ames has been designated NASA's Center of Excellence in Information Technology. In this capacity, Ames is charged with the responsibility to build an Information Technology Research Program that is preeminent within NASA. RIACS serves as a bridge between NASA Ames and the academic community, and RIACS scientists and visitors work in close collaboration with NASA scientists. RIACS has the additional goal of broadening the base of researchers in these areas of importance to the nation's space and aeronautics enterprises. RIACS research focuses on the three cornerstones of information technology research necessary to meet the future challenges of NASA missions: (1) Automated Reasoning for Autonomous Systems. Techniques are being developed enabling spacecraft that will be self-guiding and self-correcting to the extent that they will require little or no human intervention. Such craft will be equipped to independently solve problems as they arise, and fulfill their missions with minimum direction from Earth; (2) Human-Centered Computing. Many NASA missions require synergy between humans and computers, with sophisticated computational aids amplifying human cognitive and perceptual abilities; (3) High Performance Computing and Networking. Advances in the performance of computing and networking continue to have major impact on a variety of NASA endeavors, ranging from modeling and simulation to data analysis of large datasets to collaborative engineering, planning and execution. In addition, RIACS collaborates with NASA scientists to apply information technology research to a variety of NASA application domains. RIACS also engages in other activities, such as workshops, seminars, and visiting scientist programs, designed to encourage and facilitate collaboration between the university and NASA information technology research communities.

  11. NASA-OAI HPCCP K-12 Program

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The NASA-OAI High Performance Communication and Computing K- 12 School Partnership program has been completed. Cleveland School of the Arts, Empire Computech Center, Grafton Local Schools and the Bug O Nay Ge Shig School have all received network equipment and connections. Each school is working toward integrating computer and communications technology into their classroom curriculum. Cleveland School of the Arts students are creating computer software. Empire Computech Center is a magnet school for technology education at the elementary school level. Grafton Local schools is located in a rural community and is using communications technology to bring to their students some of the same benefits students from suburban and urban areas receive. The Bug O Nay Ge Shig School is located on an Indian Reservation in Cass Lake, MN. The students at this school are using the computer to help them with geological studies. A grant has been issued to the friends of the Nashville Library. Nashville is a small township in Holmes County, Ohio. A community organization has been formed to turn their library into a state of the art Media Center. Their goal is to have a place where rural students can learn about different career options and how to go about pursuing those careers. Taylor High School in Cincinnati, Ohio was added to the schools involved in the Wind Tunnel Project. A mini grant has been awarded to Taylor High School for computer equipment. The computer equipment is utilized in the school's geometry class to computationally design objects which will be tested for their aerodynamic properties in the Barberton Wind Tunnel. The students who create the models can view the test in the wind tunnel via desk top conferencing. Two teachers received stipends for helping with the Regional Summer Computer Workshop. Both teachers were brought in to teach a session within the workshop. They were selected to teach the session based on their expertise in particular software applications.

  12. The Internet and Computer User Profile: a questionnaire for determining intervention targets in occupational therapy at mental health vocational centers.

    PubMed

    Regev, Sivan; Hadas-Lidor, Noami; Rosenberg, Limor

    2016-08-01

    In this study, the assessment tool "Internet and Computer User Profile" questionnaire (ICUP) is presented and validated. It was developed in order to gather information for setting intervention goals to meet current demands. Sixty-eight subjects aged 23-68 participated in the study. The study group (n = 28) was sampled from two vocational centers. The control group consisted of 40 participants from the general population that were sampled by convenience sampling based on the demographics of the study group. Subjects from both groups answered the ICUP questionnaire. Subjects of the study group answered the General Self- Efficacy (GSE) questionnaire and performed the Assessment of Computer Task Performance (ACTP) test in order to examine the convergent validity of the ICUP. Twenty subjects from both groups retook the ICUP questionnaire in order to obtain test-retest results. Differences between groups were tested using multiple analysis of variance (MANOVA) tests. Pearson and Spearman's tests were used for calculating correlations. Cronbach's alpha coefficient and k equivalent were used to assess internal consistency. The results indicate that the questionnaire is valid and reliable. They emphasize that the layout of the ICUP items facilitates in making a comprehensive examination of the client's perception regarding his participation in computer and internet activities. Implications for Rehabiliation The assessment tool "Internet and Computer User Profile" (ICUP) questionnaire is a novel assessment tool that evaluates operative use and individual perception of computer activities. The questionnaire is valid and reliable for use with participants of vocational centers dealing with mental illness. It is essential to facilitate access to computers for people with mental illnesses, seeing that they express similar interest in computers and internet as people from the general population of the same age. Early intervention will be particularly effective for young adults dealing with mental illness, since the digital gap between them and young people in general is relatively small.

  13. National Wind Tecnology Center Provides Dual Axis Resonant Blade Testing

    ScienceCinema

    Felker, Fort

    2018-01-16

    NREL's Structural Testing Laboratory at the National Wind Technology Center (NWTC) provides experimental laboratories, computer facilities for analytical work, space for assembling components and turbines for atmospheric testing as well as office space for industry researchers. Fort Felker, center director at the NWTC, discusses NREL's state-of-the-art structural testing capabilities and shows a flapwise and edgewise blade test in progress.

  14. KSC-06pd0396

    NASA Image and Video Library

    2006-03-01

    KENNEDY SPACE CENTER, FLA. - The Operations Support Building II at NASA's Kennedy Space Center is seen here, newly built and landscaped. The building replaced modular housing and trailers in the Launch Complex 39 area. The five-story, 189,000-square-foot building consists of approximately 860 office spaces, training rooms, computer rooms, multimedia conference rooms, technical libraries, and a 352-person mission conference center with observation deck. Photo credit: Cory Huston

  15. Activities at the Lunar and Planetary Institute

    NASA Technical Reports Server (NTRS)

    1985-01-01

    The activities of the Lunar and Planetary Institute for the period July to December 1984 are discussed. Functions of its departments and projects are summarized. These include: planetary image center; library information center; computer center; production services; scientific staff; visitors program; scientific projects; conferences; workshops; seminars; publications and communications; panels, teams, committees and working groups; NASA-AMES vertical gun range (AVGR); and lunar and planetary science council.

  16. Pennsylvania In-Service Technology Education: Past, Present and Future. A Status Report of the Regional Computer Resource Center at Temple University.

    ERIC Educational Resources Information Center

    Robertson, Elton

    In 1984, the Commonwealth of Pennsylvania passed the Information Technology Education Act, which created 14 Information Technology Education for the Commonwealth (ITEC) centers. The purpose of the ITEC centers was to assist teachers in using and improving their use of microcomputers in their own classrooms by training them in instructional uses of…

  17. National Wind Tecnology Center Provides Dual Axis Resonant Blade Testing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Felker, Fort

    2013-11-13

    NREL's Structural Testing Laboratory at the National Wind Technology Center (NWTC) provides experimental laboratories, computer facilities for analytical work, space for assembling components and turbines for atmospheric testing as well as office space for industry researchers. Fort Felker, center director at the NWTC, discusses NREL's state-of-the-art structural testing capabilities and shows a flapwise and edgewise blade test in progress.

  18. Application-oriented offloading in heterogeneous networks for mobile cloud computing

    NASA Astrophysics Data System (ADS)

    Tseng, Fan-Hsun; Cho, Hsin-Hung; Chang, Kai-Di; Li, Jheng-Cong; Shih, Timothy K.

    2018-04-01

    Nowadays Internet applications have become more complicated that mobile device needs more computing resources for shorter execution time but it is restricted to limited battery capacity. Mobile cloud computing (MCC) is emerged to tackle the finite resource problem of mobile device. MCC offloads the tasks and jobs of mobile devices to cloud and fog environments by using offloading scheme. It is vital to MCC that which task should be offloaded and how to offload efficiently. In the paper, we formulate the offloading problem between mobile device and cloud data center and propose two algorithms based on application-oriented for minimum execution time, i.e. the Minimum Offloading Time for Mobile device (MOTM) algorithm and the Minimum Execution Time for Cloud data center (METC) algorithm. The MOTM algorithm minimizes offloading time by selecting appropriate offloading links based on application categories. The METC algorithm minimizes execution time in cloud data center by selecting virtual and physical machines with corresponding resource requirements of applications. Simulation results show that the proposed mechanism not only minimizes total execution time for mobile devices but also decreases their energy consumption.

  19. Tropical Ocean and Global Atmosphere (TOGA) heat exchange project: A summary report

    NASA Technical Reports Server (NTRS)

    Liu, W. T.; Niiler, P. P.

    1985-01-01

    A pilot data center to compute ocean atmosphere heat exchange over the tropical ocean is prposed at the Jet Propulsion Laboratory (JPL) in response to the scientific needs of the Tropical Ocean and Global Atmosphere (TOGA) Program. Optimal methods will be used to estimate sea surface temperature (SET), surface wind speed, and humidity from spaceborne observations. A monthly summary of these parameters will be used to compute ocean atmosphere latent heat exchanges. Monthly fields of surface heat flux over tropical oceans will be constructed using estimations of latent heat exchanges and short wave radiation from satellite data. Verification of all satellite data sets with in situ measurements at a few locations will be provided. The data center will be an experimental active archive where the quality and quantity of data required for TOGA flux computation are managed. The center is essential to facilitate the construction of composite data sets from global measurements taken from different sensors on various satellites. It will provide efficient utilization and easy access to the large volume of satellite data available for studies of ocean atmosphere energy exchanges.

  20. Efficient workload management in geographically distributed data centers leveraging autoregressive models

    NASA Astrophysics Data System (ADS)

    Altomare, Albino; Cesario, Eugenio; Mastroianni, Carlo

    2016-10-01

    The opportunity of using Cloud resources on a pay-as-you-go basis and the availability of powerful data centers and high bandwidth connections are speeding up the success and popularity of Cloud systems, which is making on-demand computing a common practice for enterprises and scientific communities. The reasons for this success include natural business distribution, the need for high availability and disaster tolerance, the sheer size of their computational infrastructure, and/or the desire to provide uniform access times to the infrastructure from widely distributed client sites. Nevertheless, the expansion of large data centers is resulting in a huge rise of electrical power consumed by hardware facilities and cooling systems. The geographical distribution of data centers is becoming an opportunity: the variability of electricity prices, environmental conditions and client requests, both from site to site and with time, makes it possible to intelligently and dynamically (re)distribute the computational workload and achieve as diverse business goals as: the reduction of costs, energy consumption and carbon emissions, the satisfaction of performance constraints, the adherence to Service Level Agreement established with users, etc. This paper proposes an approach that helps to achieve the business goals established by the data center administrators. The workload distribution is driven by a fitness function, evaluated for each data center, which weighs some key parameters related to business objectives, among which, the price of electricity, the carbon emission rate, the balance of load among the data centers etc. For example, the energy costs can be reduced by using a "follow the moon" approach, e.g. by migrating the workload to data centers where the price of electricity is lower at that time. Our approach uses data about historical usage of the data centers and data about environmental conditions to predict, with the help of regressive models, the values of the parameters of the fitness function, and then to appropriately tune the weights assigned to the parameters in accordance to the business goals. Preliminary experimental results, presented in this paper, show encouraging benefits.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top