Blood Urea Nitrogen/Creatinine Ratio Identifies a High-Risk but Potentially Reversible Form of Renal Dysfunction in Patients With Decompensated Heart Failure

PubMed Central

Brisco, Meredith A.; Coca, Steven G.; Chen, Jennifer; Owens, Anjali Tiku; McCauley, Brian D.; Kimmel, Stephen E.; Testani, Jeffrey M.

2014-01-01

Background Identifying reversible renal dysfunction (RD) in the setting of heart failure is challenging. The goal of this study was to evaluate whether elevated admission blood urea nitrogen/creatinine ratio (BUN/Cr) could identify decompensated heart failure patients likely to experience improvement in renal function (IRF) with treatment. Methods and Results Consecutive hospitalizations with a discharge diagnosis of heart failure were reviewed. IRF was defined as ≥20% increase and worsening renal function as ≥20% decrease in estimated glomerular filtration rate. IRF occurred in 31% of the 896 patients meeting eligibility criteria. Higher admission BUN/Cr was associated with inhospital IRF (odds ratio, 1.5 per 10 increase; 95% confidence interval [CI], 1.3–1.8; P<0.001), an association persisting after adjustment for baseline characteristics (odds ratio, 1.4; 95% CI, 1.1–1.8; P=0.004). However, higher admission BUN/Cr was also associated with post-discharge worsening renal function (odds ratio, 1.4; 95% CI, 1.1–1.8; P=0.011). Notably, in patients with an elevated admission BUN/Cr, the risk of death associated with RD (estimated glomerular filtration rate <45) was substantial (hazard ratio, 2.2; 95% CI, 1.6–3.1; P<0.001). However, in patients with a normal admission BUN/Cr, RD was not associated with increased mortality (hazard ratio, 1.2; 95% CI, 0.67–2.0; P=0.59; p interaction=0.03). Conclusions An elevated admission BUN/Cr identifies decompensated patients with heart failure likely to experience IRF with treatment, providing proof of concept that reversible RD may be a discernible entity. However, this improvement seems to be largely transient, and RD, in the setting of an elevated BUN/Cr, remains strongly associated with death. Further research is warranted to develop strategies for the optimal detection and treatment of these high-risk patients. PMID:23325460

Steam Oxidation Testing in the Severe Accident Test Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pint, Bruce A.

After the March 2011 accident at Fukushima Daiichi, Oak Ridge National Laboratory (ORNL) began conducting high temperature steam oxidation testing of candidate materials for accident tolerant fuel (ATF) cladding in August 2011 [1-11]. The ATF concept is to enhance safety margins in light water reactors (LWR) during severe accident scenarios by identifying materials with 100× slower steam oxidation rates compared to current Zr-based alloys. In 2012, the ORNL laboratory equipment was expanded and made available to the entire ATF community as the Severe Accident Test Station (SATS) [4,12]. Compared to the current UO2/Zr-based alloy fuel system, an ATF alternative wouldmore » significantly reduce the rate of heat and hydrogen generation in the core during a coolant-limited severe accident [13-14]. The steam oxidation behavior of candidate materials is a key metric in the evaluation of ATF concepts and also an important input into models [15-17]. However, initial modeling work of FeCrAl cladding has used incomplete information on the physical properties of FeCrAl. Also, the steam oxidation data being collected at 1200°-1700°C is unique as no prior work has considered steam oxidation of alloys at such high temperatures. Also, because many accident scenarios include steadily increasing temperatures, the required data are not traditional isothermal exposures but exposures with varying “ramp” rates. In some cases, the steam oxidation behavior has been surprising and difficult to interpret. Thus, more fundamental information continues to be collected. In addition, more work continues to focus on commercially-manufactured tube material. This report summarizes recent work to characterize the behavior of candidate alloys exposed to high temperature steam, evaluate steam oxidation behavior in various ramp scenarios and continue to collect integral data on FeCrAl compared to conventional Zr-based cladding.« less

Effect of combination vitamin E and single long-acting progesterone dose on enhancing pregnancy outcomes in the first two parities of young rabbit does.

PubMed

Salem, Anas A; Gomaa, Yasmin A

2014-11-10

Vitamin E (Vit. E) is needed for young rabbits to prevent reproductive abnormalities, abortion and poor survivability of kits. Also, exogenous progesterone (P4) is needed for rabbits to enhance early embryonic development because of inadequate corpus luteum (CL) development at this age. Hence, the aim of this study was to investigate the effect of injecting Vit. E and the combination Vit. E+P4 in young does on live body weight (LBW) gain, gestation length (GL), numbers of services/conception (NS), conception rate (CR), abortion rate (AR), litter size (LS), kit weight (KW), total litter weight (TLW), mortality rate (MR) and progesterone (P4) concentration. The group treated with Vit. E+P4 had a greater LBW gain and lesser AR at first and second pregnancy. Treatments did not have significant impact on GL and LS in the first two parities. Treatments resulted in a significantly lesser MR and greater TLW at the second parity. The Vit. E+P4 treatment resulted in a significantly lesser NS at the first parity, while Vit. E alone resulted in a significant reduction in NS at the second parity. Vit. E+P4 had a positive effect on CR at the first parity compared with controls. Vit. E alone increased CR at the second parity compared with that of the control group. The mean P4 concentration from mating to mid-pregnancy at first parity was significantly greater in the Vit. E+P4 than Vit. E and control groups. In conclusion, treatment with Vit. E+P4 at the first parity may be economically applied on rabbit farms because this treatment resulted in a greater maintenance of the first pregnancy and improved reproductive performance at the second parity as compared with results from the Vit. E treated and control groups. Copyright © 2014 Elsevier B.V. All rights reserved.

Mechanical Properties of High Entropy Alloy Al0.1CoCrFeNi for Peripheral Vascular Stent Application.

PubMed

Alagarsamy, Karthik; Fortier, Aleksandra; Komarasamy, Mageshwari; Kumar, Nilesh; Mohammad, Atif; Banerjee, Subhash; Han, Hai-Chao; Mishra, Rajiv S

2016-12-01

High entropy alloys (HEAs) are new class of metallic materials with five or more principal alloying elements. Due to this distinct concept of alloying, the HEAs exhibit unique properties compared to conventional alloys. The outstanding properties of HEAs include increased strength, superior wear resistance, high temperature stability, increased fatigue properties, good corrosion, and oxidation resistance. Such characteristics of HEAs have generated significant interest among the scientific community. However, their applications are yet to be explored. This paper discusses the mechanical behavior and microstructure of Al 0.1 CoCrFeNi HEA subjected to thermo-mechanical processing, and its potential application in peripheral vascular stent implants that are prone to high failure rates. Results show that Al 0.1 CoCrFeNi alloy possesses characteristics that compare well against currently used stent materials and it can potentially find use in peripheral vascular stent implants and extend their life-cycle.

Alternative Caries Management Options for Primary Molars: 2.5-Year Outcomes of a Randomised Clinical Trial.

PubMed

Santamaría, Ruth M; Innes, N P T; Machiulskiene, Vita; Schmoeckel, Julian; Alkilzy, Mohammad; Splieth, Christian H

2017-12-20

Less invasive caries management techniques for treating cavitated carious primary teeth, which involve the concept of caries control by managing the activity of the biofilm, are becoming common. This study aimed to compare the clinical efficacy (minor/major failures) and survival rates (successful cases without any failures) of 3 carious lesion treatment approaches, the Hall Technique (HT), non-restorative caries treatment (NRCT), and conventional restorations (CR), for the management of occlusoproximal caries lesions (ICDAS 3-5) in primary molars. Results at 2.5 years are presented. A total of 169 children (3- to 8-year-olds) were enrolled in this secondary care-based, 3-arm parallel-group, randomised controlled trial. Participants were allocated to: HT (n = 52; sealing caries with stainless-steel crowns without caries removal), NRCT (n = 52; opening up the cavity and applying fluoride varnish), CR (n = 65; control arm, complete caries removal and compomer restoration). Statistical analyses were: non-parametric Kruskal-Wallis analysis of variance, Mann-Whitney U test and Kaplan-Meier survival analyses. One hundred and forty-two participants (84%; HT = 40/52; NRCT = 44/52; CR = 58/65) had follow-up data of 1-33 months (mean = 26). Overall, 25 (HT = 2, NRCT = 9, CR = 14) of 142 participants (17.6%) presented with at least 1 minor failure (reversible pulpitis, caries progression, or secondary caries; p = 0.013, CI = 0.012-0.018; Mann-Whitney U test). Ten (HT = 1, NRCT = 4, CR = 5) of 142 participants (7.04%) experienced at least 1 major failure (irreversible pulpitis, abscess, unrestorable tooth; p = 0.043, CI = 0.034-0.045). Independent comparisons between 2 samples found that NRCT-CR had no statistically significant difference in failures (p > 0.05), but for CR-HT (p = 0.037, CI = 0.030-0.040) and for NRCT-HT (p = 0.011, CI = 0.010-0.016; Kruskal-Wallis test) significant differences were observed. Cumulative survival rates were HT = 92.5%, NRCT = 70.5%, and CR = 67.2% (p = 0.012). NRCT and CR outcomes were comparable. HT performed better than NRCT and CR for all outcomes. This study was funded by the Paediatric Dentistry Department, Greifswald University, Germany (Trial registration No. NCT01797458). © 2017 S. Karger AG, Basel.

Effect of seasonal changes on fertility parameters of Holstein dairy cows in subtropical climate of Taiwan.

PubMed

Liu, Wen-Bor; Peh, Huo-Cheng; Wang, Chien-Kai; Mangwe, Mancoba Christopher; Chen, Chih-Feng; Chiang, Hsin-I

2018-06-01

The purpose of this retrospective study was to investigate the relationship between temperature-humidity index (THI), season, and conception rate (CR) of Holstein cows in central Taiwan. The mean performance and number of observations were statistically evaluated for various parameters, including age at first service, number of days open, gestation length, CR, and calving interval for different parities. The results indicate that the mean age at first service was 493.2 days; the gestation length was similar across all cows of different parities, ranging from 275.1 to 280.7 days. The overall CR of all inseminations was significantly lower in multiparous cows (47.26%±0.22%) than in heifers (57.14%±0.11%) (p<0.05). At THI>72 and during the hot season (from June to November), CRs for multiparous cows were significantly reduced compared to that for heifers, while the ratio remained unchanged among heifers for all seasons. To achieve a high CR, lactating cows should be bred in winter and spring (from December to May) from the start of the seasonal breeding program, whereas the heifer should be allowed to breed in summer and fall under the subtropical climate in Taiwan.

Genetic and environmental factors influencing first service conception rate and late embryonic/foetal mortality in low fertility dairy herds.

PubMed

Grimard, B; Freret, S; Chevallier, A; Pinto, A; Ponsart, C; Humblot, P

2006-01-01

The objective of this study was to identify factors affecting variation in conception rate to first artificial inseminations (AI) (CR: number of pregnant cows on D80-100/inseminated cows) and the incidence of embryonic/foetal loss (LEM) between 21 and 80 days of pregnancy (number of cows non-pregnant on D80-100/pregnant on D21) in 44 low fertility dairy herds of the west-central region of France. Reproductive status was assessed using progesterone milk concentration on D0 = Day of AI and D21-24, plasma PSPB concentration on D30-35, rectal palpation on D80-100 and observed return to oestrous. The final data set contained 1285 Prim'Holstein cows, 5.0% (64/1285) were inseminated in the luteal phase (progesterone > or = 3 ng/ml on D0), 61.3% (787/1285) were pregnant on D21-24 (progesterone < 3 ng/ml on D0 and > or = 5 ng/ml on D21-24), 15.4% lost their embryo/foetus between D21-24 and D80-100 (198/1285) and 45.8% (589/1285) were pregnant on D80-100. The incidence of late embryonic/foetal loss (LEM) was 25.2% (198/787). Multivariate logistic regression models including the random herd effect were used to analyse the relationship between AI centre, AI sire, cow's sire, parity, interval between calving and AI, milk production, milk protein content, body condition score (BCS) on D0, season of calving, season of AI, estimated genetic index on CR and LEM incidence. CR was significantly related to parity (p < 0.05), milk production after calving (p < 0.05) and estimated genetic value (p < 0.01). A significant difference in CR was observed for calving to AI interval > or = 70 days versus > or = 90 days, but the overall effect of the interval was not significant (p = 0.11). LEM incidence was affected by period of AI (p < 0.05), milk production (p < 0.05) and BCS (p < 0.05), but was not related to estimated genetic index. In conclusion, in these low fertility herds, the incidence of LEM was high and 25% of the cows lost their embryo after 21 days of pregnancy. LEM was affected by specific factors (season, BCS), which were not related to CR. The absence of a relationship between estimated genetic index and LEM in spite of its effect on CR indicates that estimated genetic merit has a greater effect on early embryonic loss or fertilisation failure than on later stages of embryo development.

QFD-ANP Approach for the Conceptual Design of Research Vessels: A Case Study

NASA Astrophysics Data System (ADS)

Venkata Subbaiah, Kambagowni; Yeshwanth Sai, Koneru; Suresh, Challa

2016-10-01

Conceptual design is a subset of concept art wherein a new idea of product is created instead of a visual representation which would directly be used in a final product. The purpose is to understand the needs of conceptual design which are being used in engineering designs and to clarify the current conceptual design practice. Quality function deployment (QFD) is a customer oriented design approach for developing new or improved products and services to enhance customer satisfaction. House of quality (HOQ) has been traditionally used as planning tool of QFD which translates customer requirements (CRs) into design requirements (DRs). Factor analysis is carried out in order to reduce the CR portions of HOQ. The analytical hierarchical process is employed to obtain the priority ratings of CR's which are used in constructing HOQ. This paper mainly discusses about the conceptual design of an oceanographic research vessel using analytical network process (ANP) technique. Finally the QFD-ANP integrated methodology helps to establish the importance ratings of DRs.

The effect of organic compounds in the oxidation kinetics of Cr(III) by H 2O 2

NASA Astrophysics Data System (ADS)

Pettine, Maurizio; Gennari, Francesca; Campanella, Luigi; Millero, Frank J.

2008-12-01

The oxidation of Cr(III) has been studied in NaCl solutions in the presence of two siderophore models, acetohydroxamic acid (Aha) and benzohydroxamic acid (Bha), the natural siderophore Desferal (DFOB) and the synthetic aminocarboxilate (ethylenedinitrilo)-tetra-acetic acid (EDTA) as a function of pH (8-9), ionic strength (0.01-2 M) and temperature (10-50 °C), at different Cr(III)-organic compound ratios. The addition of Aha and Bha caused the rates to increase at low ligand/Cr(III) ratios and decrease at high ratios. The variation of the pseudo first order rate constant ( k1) as a function of the ligand concentration has been attributed to the formation of three Cr(III)-organo species (1:1, 1:2, 1:3), which can form in the presence of monohydroxamic acids. A kinetic model has been developed that gives a value of 600 (min -1) for the pseudo first order rate constant k and values approaching zero for k and k. These kinetic results demonstrate that these monohydroxamic acids are able to bind with Cr(III) under experimental conditions that may occur in natural waters and can increase the oxidation rates of Cr(III) with H 2O 2 by a factor of 3.5 at an Aha/Cr(III) ratio of about 50-100. The monohydroxamic acids also affect the rates on aged products of Cr(III), suggesting that these ligands are able to affect the oxidation rates by releasing reactive Cr(III). DFOB and EDTA do not have a great effect on the oxidation of Cr(III) with H 2O 2. This is thought to be due to the much longer times they need to form complexes with Cr(III) compared to Aha and Bha. The rates for the formation of DFOB and EDTA complexes with Cr(III) are not competitive with the rates of the formation of aged Cr(III). After allowing Cr(III) and DFOB to react for 5 days to form the complex, reaction rates of Cr(III) with H 2O 2 appear to be lowered probably because of steric hindrance of the chelated Cr(III).

Literature review report on atomistic modeling tools for FeCrAl alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yongfeng; Schwen, Daniel; Martinez, Enrique

2015-12-01

This reports summarizes the literature review results on atomistic tools, particularly interatomic potentials used in molecular dynamics simulations, for FeCrAl ternary alloys. FeCrAl has recently been identified as a possible cladding concept for accident tolerant fuels for its superior corrosion resistance. Along with several other concepts, an initial evaluation and recommendation are desired for FeCrAl before it’s used in realistic fuels. For this purpose, sufficient understanding on the in-reactor behavior of FeCrAl needs to be grained in a relatively short timeframe, and multiscale modeling and simulations have been selected as an efficient measure to supplement experiments and in-reactor testing formore » better understanding on FeCrAl. For the limited knowledge on FeCrAl alloys, the multiscale modeling approach relies on atomistic simulations to obtain the missing material parameters and properties. As a first step, atomistic tools have to be identified and this is the purpose of the present report. It was noticed during the literature survey that no interatomic potentials currently available for FeCrAl. Here, we summarize the interatomic potentials available for FeCr alloys for possible molecular dynamics studies using FeCr as surrogate materials. Other atomistic methods such as lattice kinetic Monte Carlo are also included in this report. A couple of research topics at the atomic scale are suggested based on the literature survey.« less

Tungsten fiber reinforced FeCralY: A first generation composite turbine blade material

NASA Technical Reports Server (NTRS)

Petrasek, D. W.; Winsa, E. A.; Westfall, L. J.; Signorelli, R. A.

1979-01-01

Tungsten-fiber/FeCrAlY (W/FeCrAlY) was identified as a promising aircraft engine, first generation, turbine blade composite material. Based on available data, W/FeCrAlY should have the stress-rupture, creep, tensile, fatigue, and impact strengths required for turbine blades operating from 1250 to 1370 K. It should also have adequate oxidation, hot corrosion, and thermal cycling damage resistance as well as high thermal conductivity. Concepts for potentially low cost blade fabrication were developed. These concepts were used to design a first stage JT9D convection cooled turbine blade having a calculated 50 K use-temperature advantage over the directionally solidified superalloy blade.

Partially filled intermediate band of Cr-doped GaN films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sonoda, S.

2012-05-14

We investigated the band structure of sputtered Cr-doped GaN (GaCrN) films using optical absorption, photoelectron yield spectroscopy, and charge transport measurements. It was found that an additional energy band is formed in the intrinsic band gap of GaN upon Cr doping, and that charge carriers in the material move in the inserted band. Prototype solar cells showed enhanced short circuit current and open circuit voltage in the n-GaN/GaCrN/p-GaN structure compared to the GaCrN/p-GaN structure, which validates the proposed concept of an intermediate-band solar cell.

Cognitive reserve as a predictor of two year neuropsychological performance in early onset first-episode schizophrenia.

PubMed

de la Serna, Elena; Andrés-Perpiñá, Susana; Puig, Olga; Baeza, Inmaculada; Bombin, Igor; Bartrés-Faz, David; Arango, Celso; Gonzalez-Pinto, Ana; Parellada, Mara; Mayoral, María; Graell, Montserrat; Otero, Soraya; Guardia, Joan; Castro-Fornieles, Josefina

2013-01-01

The concept of cognitive reserve (CR) has been defined as individual differences in the efficient utilization of brain networks which allow some people to cope better than others with brain pathology. CR has been developed mainly in the field of aging and dementia after it was observed that there appears to be no direct relationship between the degree of brain pathology and the severity of clinical manifestations of this damage. The present study applies the concept of CR to a sample of children and adolescents with a first episode of schizophrenia, aiming to assess the possible influence of CR on neuropsychological performance after two year follow-up, controlling for the influence of clinical psychopathology. 35 patients meeting DSM-IV criteria for schizophrenia or schizoaffective disorder (SSD) and 98 healthy controls (HC) matched for age and gender were included. CR was assessed at baseline, taking into account premorbid IQ, educational-occupational level and leisure activities. Clinical and neuropsychological assessments were completed by all patients at two year follow-up. The CR proxy was able to predict working memory and attention at two year follow-up. Verbal memory and cognitive flexibility were not predicted by any of the variables included in the regression model. The SSD group obtained lower scores than HC on CR. CR measures correctly classified 79.8% of the sample as being SSD or HC. Lower scores on CR were observed in SSD than in HC and the CR measure correctly classified a high percentage of the sample into the two groups. CR may predict SSD performance on working memory and attention tasks. Copyright © 2012 Elsevier B.V. All rights reserved.

Effect of chromium (VI) on the multiple nitrogen removal pathways and microbial community of aerobic granular sludge.

PubMed

Zheng, Xiao-Ying; Lu, Dan; Wang, Ming-Yang; Chen, Wei; Zhou, Gan; Zhang, Yuan

2017-06-12

The frequent appearance of Cr(VI) significantly impacts the microbial metabolism in wastewater. In this study, long-term effects of Cr(VI) on microbial community, nitrogen removal pathways and mechanism of aerobic granular sludge (AGS) were investigated. AGS had strong resistance ability to 1.0 mg/L Cr(VI). 3.0 mg/L Cr(VI) increased the heterotrophic-specific ammonia uptake rate (HSAUR) and heterotrophic-specific nitrate uptake rate (HSNUR) transiently, whereas 5.0 mg/L Cr(VI) sharply decreased the specific ammonia uptake rate (SAUR), specific nitrate uptake rate (SNUR) and simultaneous nitrification denitrification rate (SNDR). It was found that Cr (VI) has a greater inhibitory effect on autotrophic nitrification (ASAUR), and the maximal inhibition rate (IR) was 139.19%. Besides, the inhibition of Cr (VI) on nitrogen removal process belongs to non-competitive inhibition. Cr(VI) had a weaker negative impact on heterotrophic bacteria compared with that on autotrophic bacteria. Denaturing gradient gel electrophoresis analyses suggest that Acidovorax sp., flavobacterium sp., uncultured soil bacterium, uncultured nitrosospira sp., uncultured prokaryote, uncultured β-proteobacterium and uncultured pseudomonas sp. were the dominant species. The inhibition of Cr(VI) on nitrite-oxidizing bacteria was the strongest, followed by ammonia-oxidizing bacteria and denitrifying bacteria. Linear correlations between bacterial count and biomass-specific uptake rate were observed when the Cr(VI) concentration exceeded 3 mg/L. This study revealed the effect of Cr(VI) on nitrification is more serious than that on denitrification. Autotrophic and heterotrophic nitrification, heterotrophic denitrification and simultaneous nitrification denitrification played a significant role on nitrogen removal under Cr(VI) stress.

Speech effort measurement and stuttering: investigating the chorus reading effect.

PubMed

Ingham, Roger J; Warner, Allison; Byrd, Anne; Cotton, John

2006-06-01

The purpose of this study was to investigate chorus reading's (CR's) effect on speech effort during oral reading by adult stuttering speakers and control participants. The effect of a speech effort measurement highlighting strategy was also investigated. Twelve persistent stuttering (PS) adults and 12 normally fluent control participants completed 1-min base rate readings (BR-nonchorus) and CRs within a BR/CR/BR/CR/BR experimental design. Participants self-rated speech effort using a 9-point scale after each reading trial. Stuttering frequency, speech rate, and speech naturalness measures were also obtained. Instructions highlighting speech effort ratings during BR and CR phases were introduced after the first CR. CR improved speech effort ratings for the PS group, but the control group showed a reverse trend. Both groups' effort ratings were not significantly different during CR phases but were significantly poorer than the control group's effort ratings during BR phases. The highlighting strategy did not significantly change effort ratings. The findings show that CR will produce not only stutter-free and natural sounding speech but also reliable reductions in speech effort. However, these reductions do not reach effort levels equivalent to those achieved by normally fluent speakers, thereby conditioning its use as a gold standard of achievable normal fluency by PS speakers.

Effect of seasonal changes on fertility parameters of Holstein dairy cows in subtropical climate of Taiwan

PubMed Central

2018-01-01

Objective The purpose of this retrospective study was to investigate the relationship between temperature–humidity index (THI), season, and conception rate (CR) of Holstein cows in central Taiwan. Methods The mean performance and number of observations were statistically evaluated for various parameters, including age at first service, number of days open, gestation length, CR, and calving interval for different parities. Results The results indicate that the mean age at first service was 493.2 days; the gestation length was similar across all cows of different parities, ranging from 275.1 to 280.7 days. The overall CR of all inseminations was significantly lower in multiparous cows (47.26%±0.22%) than in heifers (57.14%±0.11%) (p<0.05). At THI>72 and during the hot season (from June to November), CRs for multiparous cows were significantly reduced compared to that for heifers, while the ratio remained unchanged among heifers for all seasons. Conclusion To achieve a high CR, lactating cows should be bred in winter and spring (from December to May) from the start of the seasonal breeding program, whereas the heifer should be allowed to breed in summer and fall under the subtropical climate in Taiwan. PMID:28920410

Meta-analysis on the association between pathologic complete response and triple-negative breast cancer after neoadjuvant chemotherapy.

PubMed

Wu, Kunpeng; Yang, Qiaozhu; Liu, Yi; Wu, Aibing; Yang, Zhixiong

2014-04-15

Triple-negative breast cancer (TNBC) is a special subtype of breast cancer that is characterized by poor prognosis, strong tumor invasion and a high pathologic complete response (pCR) to neoadjuvant chemotherapy (NAC). The pCR rate is a prognostic factor for TNBC. We aimed to evaluate the relationship between pCR and TNBC after NAC and originally tried to identify factors related to achieving pCR for TNBC using a meta-analysis. We systematically searched the literature for pCR and breast cancer after NAC and carefully identified eligibility criteria. The association between pCR and breast cancer subtypes was estimated using Review Manager, while pCR rates for TNBC and non-TNBC were determined using Meta-Analyst. This analysis included a total of 9,460 cases from 27 studies. The summary odds ratio estimating the relationship between pCR and breast cancer subtypes (TNBC vs non-TNBC) was 3.02 (95% confidence interval (CI), 2.66 to 3.42). The TNBC pCR rate was 28.9% (95% CI, 27.0 to 30.8%) and the non-TNBC was 12.5% (95% CI, 11.7 to 13.4%). From subgroup analyses, we identified the factors associated with the highest pCR rates for TNBC. TNBC has a higher pCR rate than non-TNBC. In the NAC setting, these factors of platinum-containing, more than six cycles, four kinds of drugs, 16 weeks' treatment duration and sequential chemotherapy may contribute to increasing the pCR rate.

Effect of free Cr content on corrosion behavior of 3Cr steels in a CO2 environment

NASA Astrophysics Data System (ADS)

Li, Wei; Xu, Lining; Qiao, Lijie; Li, Jinxu

2017-12-01

The corrosion behavior of 3Cr steels with three microstructures (martensite, bainite, combined ferrite and pearlite) in simulated oil field formation water with a CO2 partial pressure of 0.8 MPa was investigated. The relationships between Cr concentrations in corrosion scales and corrosion rates were studied. The precipitated phases that contained Cr were observed in steels of different microstructures, and free Cr content levels were compared. The results showed that steel with the martensite microstructure had the highest free Cr content, and thus had the highest corrosion resistance. The free Cr content of bainite steel was lower than that of martensite steel, and the corrosion rate of bainite steel was higher than that of martensite steel. Because large masses of Cr were combined in ferrite and pearlite steel, the corrosion rates of ferrite and pearlite steel were the highest. Free Cr content in steel affects its corrosion behavior greatly.

Short-Term Dosage Regimen for Stimulation-Induced Long-Lasting Desynchronization.

PubMed

Manos, Thanos; Zeitler, Magteld; Tass, Peter A

2018-01-01

In this paper, we computationally generate hypotheses for dose-finding studies in the context of desynchronizing neuromodulation techniques. Abnormally strong neuronal synchronization is a hallmark of several brain disorders. Coordinated Reset (CR) stimulation is a spatio-temporally patterned stimulation technique that specifically aims at disrupting abnormal neuronal synchrony. In networks with spike-timing-dependent plasticity CR stimulation may ultimately cause an anti-kindling, i.e., an unlearning of abnormal synaptic connectivity and neuronal synchrony. This long-lasting desynchronization was theoretically predicted and verified in several pre-clinical and clinical studies. We have shown that CR stimulation with rapidly varying sequences (RVS) robustly induces an anti-kindling at low intensities e.g., if the CR stimulation frequency (i.e., stimulus pattern repetition rate) is in the range of the frequency of the neuronal oscillation. In contrast, CR stimulation with slowly varying sequences (SVS) turned out to induce an anti-kindling more strongly, but less robustly with respect to variations of the CR stimulation frequency. Motivated by clinical constraints and inspired by the spacing principle of learning theory, in this computational study we propose a short-term dosage regimen that enables a robust anti-kindling effect of both RVS and SVS CR stimulation, also for those parameter values where RVS and SVS CR stimulation previously turned out to be ineffective. Intriguingly, for the vast majority of parameter values tested, spaced multishot CR stimulation with demand-controlled variation of stimulation frequency and intensity caused a robust and pronounced anti-kindling. In contrast, spaced CR stimulation with fixed stimulation parameters as well as singleshot CR stimulation of equal integral duration failed to improve the stimulation outcome. In the model network under consideration, our short-term dosage regimen enables to robustly induce long-term desynchronization at comparably short stimulation duration and low integral stimulation duration. Currently, clinical proof of concept is available for deep brain CR stimulation for Parkinson's therapy and acoustic CR stimulation for tinnitus therapy. Promising first in human data is available for vibrotactile CR stimulation for Parkinson's treatment. For the clinical development of these treatments it is mandatory to perform dose-finding studies to reveal optimal stimulation parameters and dosage regimens. Our findings can straightforwardly be tested in human dose-finding studies.

Short-Term Dosage Regimen for Stimulation-Induced Long-Lasting Desynchronization

PubMed Central

Manos, Thanos; Zeitler, Magteld; Tass, Peter A.

2018-01-01

In this paper, we computationally generate hypotheses for dose-finding studies in the context of desynchronizing neuromodulation techniques. Abnormally strong neuronal synchronization is a hallmark of several brain disorders. Coordinated Reset (CR) stimulation is a spatio-temporally patterned stimulation technique that specifically aims at disrupting abnormal neuronal synchrony. In networks with spike-timing-dependent plasticity CR stimulation may ultimately cause an anti-kindling, i.e., an unlearning of abnormal synaptic connectivity and neuronal synchrony. This long-lasting desynchronization was theoretically predicted and verified in several pre-clinical and clinical studies. We have shown that CR stimulation with rapidly varying sequences (RVS) robustly induces an anti-kindling at low intensities e.g., if the CR stimulation frequency (i.e., stimulus pattern repetition rate) is in the range of the frequency of the neuronal oscillation. In contrast, CR stimulation with slowly varying sequences (SVS) turned out to induce an anti-kindling more strongly, but less robustly with respect to variations of the CR stimulation frequency. Motivated by clinical constraints and inspired by the spacing principle of learning theory, in this computational study we propose a short-term dosage regimen that enables a robust anti-kindling effect of both RVS and SVS CR stimulation, also for those parameter values where RVS and SVS CR stimulation previously turned out to be ineffective. Intriguingly, for the vast majority of parameter values tested, spaced multishot CR stimulation with demand-controlled variation of stimulation frequency and intensity caused a robust and pronounced anti-kindling. In contrast, spaced CR stimulation with fixed stimulation parameters as well as singleshot CR stimulation of equal integral duration failed to improve the stimulation outcome. In the model network under consideration, our short-term dosage regimen enables to robustly induce long-term desynchronization at comparably short stimulation duration and low integral stimulation duration. Currently, clinical proof of concept is available for deep brain CR stimulation for Parkinson's therapy and acoustic CR stimulation for tinnitus therapy. Promising first in human data is available for vibrotactile CR stimulation for Parkinson's treatment. For the clinical development of these treatments it is mandatory to perform dose-finding studies to reveal optimal stimulation parameters and dosage regimens. Our findings can straightforwardly be tested in human dose-finding studies. PMID:29706900

Intestinal absorption of 5 chromium compounds in young black ducks (Anas rubripes)

USGS Publications Warehouse

Eastin, W.C.; Haseltine, S.D.; Murray, H.C.

1980-01-01

An in vivo intestinal perfusion technique was used to measure the absorption rates of five Cr compounds in black ducks. Cr was absorbed from saline solutions of KCr(SO4 )2 and CrO3 at a rate about 1.5 to 2.0 times greater than from solutions of Cr, Cr(NO3 )3, and Cr(C5H7O2)3. These results suggest the ionic form of Cr in solution may be an important factor in determining absorption of Cr compounds from the small intestine.

Evaluation on the Corrosion of the Three Ni-Cr Alloys with Different Composition

PubMed Central

Rao, Srinivasa B.; Chowdhary, Ramesh

2011-01-01

Dental casting alloys are widely used in contact with oral tissue for many years now. With the development of new dental alloys over the past 15 years, many questions remain unanswered about their biologic safety. Concepts and current issues concerning the response to the biologic effects of dental casting alloys are presented. In this paper, samples of three commercially available nickel-chrome (Ni-cr) casting alloys (Dentaurum, Bego, Sankin) were taken to assess their corrosion behavior, using potentiodynamic polarization method (electrochemical method) with fusayama artificial saliva as an electrolyte medium to check for their biocompatibility. The parameters for corrosion rate and corrosion resistance were obtained from computer-controlled corrosion schematic instrument, namely, potentiostat through corrosion software (power CV). The results obtained were analyzed by classic Tafel analysis. Statistical analysis was done by Student's t-test and ANOVA test. It was concluded that Dentarum and Bego showed satisfactory corrosive behavior, with exception of Sankin which depicted higher corrosion rate and least resistance to corrosion. Thus, the selection of an alloy should be made on the basis of corrosion resistance and biologic data from dental manufactures. PMID:21461232

Selecting Processes to Minimize Hexavalent Chromium from Stainless Steel Welding

PubMed Central

KEANE, M.; SIERT, A.; STONE, S.; CHEN, B.; SLAVEN, J.; CUMPSTON, A.; ANTONINI, J.

2015-01-01

Eight welding processes/shielding gas combinations were assessed for generation of hexavalent chromium (Cr6+) in stainless steel welding fumes. The processes examined were gas metal arc welding (GMAW) (axial spray, short circuit, and pulsed spray modes), flux cored arc welding (FCAW), and shielded metal arc welding (SMAW). The Cr6+ fractions were measured in the fumes; fume generation rates, Cr6+ generation rates, and Cr6+ generation rates per unit mass of welding wire were determined. A limited controlled comparison study was done in a welding shop including SMAW, FCAW, and three GMAW methods. The processes studied were compared for costs, including relative labor costs. Results indicate the Cr6+ in the fume varied widely, from a low of 2800 to a high of 34,000 ppm. Generation rates of Cr6+ ranged from 69 to 7800 μg/min, and Cr6+ generation rates per unit of wire ranged from 1 to 270 μg/g. The results of field study were similar to the findings in the laboratory. The Cr6+ (ppm) in the fume did not necessarily correlate with the Cr6+ generation rate. Physical properties were similar for the processes, with mass median aerodynamic diameters ranging from 250 to 336 nm, while the FCAW and SMAW fumes were larger (360 and 670 nm, respectively). Conclusion: The pulsed axial spray method was the best choice of the processes studied based on minimal fume generation, minimal Cr6+ generation, and cost per weld. This method is usable in any position, has a high metal deposition rate, and is relatively simple to learn and use. PMID:26690276

Enhancement of hexavalent chromium reduction and electricity production from a biocathode microbial fuel cell.

PubMed

Huang, Liping; Chen, Jingwen; Quan, Xie; Yang, Fenglin

2010-10-01

Enhancement of Cr (VI) reduction rate and power production from biocathode microbial fuel cells (MFCs) was achieved using indigenous bacteria from Cr (VI)-contaminated site as inoculum and MFC architecture with a relatively large cathode-specific surface area of 340-900 m2 m(-3). A specific Cr (VI) reduction rate of 2.4 ± 0.2 mg g(-1)VSS h(-1) and a power production of 2.4 ± 0.1 W m(-3) at a current density of 6.9 A m(-3) were simultaneously achieved at an initial Cr (VI) concentration of 39.2 mg L(-1). Initial Cr (VI) concentration and solution conductivity affected Cr (VI) reduction rate, power production and coulombic efficiency. These findings demonstrate the importance of inoculation and MFC architecture in the enhancement of Cr (VI) reduction rate and power production. This study is a beneficial attempt to improve the efficiency of biocathode MFCs and provide a good candidate of bioremediation process for Cr (VI)-contaminated sites.

Effect and removal mechanisms of 6 different washing agents for building wastes containing chromium.

PubMed

Xing-run, Wang; Yan-xia, Zhang; Qi, Wang; Jian-min, Shu

2012-01-01

With the building wastes contaminated by chromium in Haibei Chemical Plan in China as objects, we studied the contents of total Cr and Cr (VI) of different sizes, analyzed the effect of 6 different washing agents, discussed the removal mechanisms of 6 different washing agents for Cr in various forms, and finally selected applicable washing agent. As per the results, particle size had little impact on the contents of total Cr and Cr (VI); after one washing with water, the removal rate of total Cr and Cr (VI) was 75% and 78%, respectively, and after the second washing with 6 agents, the removal rate of citric acid was the highest, above 90% for total Cr and above 99% for hexavalent chromium; the pH of building wastes were reduced by citric acid, and under acid condition, hexavalent chromium was reduced to trivalent chromium spontaneously by organic acid, which led to better removal rate of acid soluble Cr and reducible Cr; due to the complexing action, citric acid had best removal rate for oxidizable trivalent chromium. In conclusion, citric acid is the most applicable second washing agent for building wastes.

Diagnostic quality of 50 and 100 µm computed radiography compared with screen–film mammography in operative breast specimens

PubMed Central

Pagliari, C M; Hoang, T; Reddy, M; Wilkinson, L S; Poloniecki, J D; Given-Wilson, R M

2012-01-01

Objective To compare reader ratings of the clinical diagnostic quality of 50 and 100 μm computed radiography (CR) systems with screen–film mammography (SFM) in operative specimens. Methods Mammograms of 57 fresh operative breast specimens were analysed by 10 readers. Exposures were made with identical position and compression with three mammographic systems (Fuji 100CR, 50CR and SFM). Images were anonymised and readers blinded to the CR system used. A five-point comparative scoring system (−2 to +2) was used to assess seven quality criteria and overall diagnostic value. Statistical analysis was subsequently performed of reader ratings (n=16 925). Results For most quality criteria, both CR systems were rated as equivalent to or better than SFM. The CR systems were significantly better at demonstrating skin edge and background tissue (p<1×10−5). Microcalcification was best demonstrated on the CR50 system (p<1×10−5). The overall diagnostic value of both CR systems was rated as being as good as or better than SFM (p<1×10−5). Conclusion In this clinical setting, the overall diagnostic performance of both CR systems was as good as or better than SFM, with the CR50 system performing better than the CR100. PMID:22096218

Anti-kindling Induced by Two-Stage Coordinated Reset Stimulation with Weak Onset Intensity

PubMed Central

Zeitler, Magteld; Tass, Peter A.

2016-01-01

Abnormal neuronal synchrony plays an important role in a number of brain diseases. To specifically counteract abnormal neuronal synchrony by desynchronization, Coordinated Reset (CR) stimulation, a spatiotemporally patterned stimulation technique, was designed with computational means. In neuronal networks with spike timing–dependent plasticity CR stimulation causes a decrease of synaptic weights and finally anti-kindling, i.e., unlearning of abnormally strong synaptic connectivity and abnormal neuronal synchrony. Long-lasting desynchronizing aftereffects of CR stimulation have been verified in pre-clinical and clinical proof of concept studies. In general, for different neuromodulation approaches, both invasive and non-invasive, it is desirable to enable effective stimulation at reduced stimulation intensities, thereby avoiding side effects. For the first time, we here present a two-stage CR stimulation protocol, where two qualitatively different types of CR stimulation are delivered one after another, and the first stage comes at a particularly weak stimulation intensity. Numerical simulations show that a two-stage CR stimulation can induce the same degree of anti-kindling as a single-stage CR stimulation with intermediate stimulation intensity. This stimulation approach might be clinically beneficial in patients suffering from brain diseases characterized by abnormal neuronal synchrony where a first treatment stage should be performed at particularly weak stimulation intensities in order to avoid side effects. This might, e.g., be relevant in the context of acoustic CR stimulation in tinnitus patients with hyperacusis or in the case of electrical deep brain CR stimulation with sub-optimally positioned leads or side effects caused by stimulation of the target itself. We discuss how to apply our method in first in man and proof of concept studies. PMID:27242500

Selecting Processes to Minimize Hexavalent Chromium from Stainless Steel Welding: Eight welding processes/shielding gas combinations were assessed for generation of hexavalent chromium in stainless steel welding fumes.

PubMed

Keane, M; Siert, A; Stone, S; Chen, B; Slaven, J; Cumpston, A; Antonini, J

2012-09-01

Eight welding processes/shielding gas combinations were assessed for generation of hexavalent chromium (Cr 6+ ) in stainless steel welding fumes. The processes examined were gas metal arc welding (GMAW) (axial spray, short circuit, and pulsed spray modes), flux cored arc welding (FCAW), and shielded metal arc welding (SMAW). The Cr 6+ fractions were measured in the fumes; fume generation rates, Cr 6+ generation rates, and Cr 6+ generation rates per unit mass of welding wire were determined. A limited controlled comparison study was done in a welding shop including SMAW, FCAW, and three GMAW methods. The processes studied were compared for costs, including relative labor costs. Results indicate the Cr 6+ in the fume varied widely, from a low of 2800 to a high of 34,000 ppm. Generation rates of Cr 6+ ranged from 69 to 7800 μg/min, and Cr 6+ generation rates per unit of wire ranged from 1 to 270 μg/g. The results of field study were similar to the findings in the laboratory. The Cr 6+ (ppm) in the fume did not necessarily correlate with the Cr 6+ generation rate. Physical properties were similar for the processes, with mass median aerodynamic diameters ranging from 250 to 336 nm, while the FCAW and SMAW fumes were larger (360 and 670 nm, respectively). The pulsed axial spray method was the best choice of the processes studied based on minimal fume generation, minimal Cr 6+ generation, and cost per weld. This method is usable in any position, has a high metal deposition rate, and is relatively simple to learn and use.

Adoption of Total Neoadjuvant Therapy for Locally Advanced Rectal Cancer.

PubMed

Cercek, Andrea; Roxburgh, Campbell S D; Strombom, Paul; Smith, J Joshua; Temple, Larissa K F; Nash, Garrett M; Guillem, Jose G; Paty, Philip B; Yaeger, Rona; Stadler, Zsofia K; Seier, Kenneth; Gonen, Mithat; Segal, Neil H; Reidy, Diane L; Varghese, Anna; Shia, Jinru; Vakiani, Efsevia; Wu, Abraham J; Crane, Christopher H; Gollub, Marc J; Garcia-Aguilar, Julio; Saltz, Leonard B; Weiser, Martin R

2018-03-22

Treatment of locally advanced rectal (LARC) cancer involves chemoradiation, surgery, and chemotherapy. The concept of total neoadjuvant therapy (TNT), in which chemoradiation and chemotherapy are administered prior to surgery, has been developed to optimize delivery of effective systemic therapy aimed at micrometastases. To compare the traditional approach of preoperative chemoradiation (chemoRT) followed by postoperative adjuvant chemotherapy with the more recent TNT approach for LARC. A retrospective cohort analysis using Memorial Sloan Kettering Cancer Center (MSK) records from 2009 to 2015 was carried out. A total of 811 patients who presented with LARC (T3/4 or node-positive) were identified. Of the 811 patients, 320 received chemoRT with planned adjuvant chemotherapy and 308 received TNT (induction fluorouracil- and oxaliplatin-based chemotherapy followed by chemoRT). Treatment and outcome data for the 2 cohorts were compared. Dosing and completion of prescribed chemotherapy were assessed on the subset of patients who received all therapy at MSK. Of the 628 patients overall, 373 (59%) were men and 255 (41%) were women, with a mean (SD) age of 56.7 (12.9) years. Of the 308 patients in the TNT cohort, 181 (49%) were men and 127 (49%) were women. Of the 320 patients in the chemoRT with planned adjuvant chemotherapy cohort, 192 (60%) were men and 128 (40%) were women. Patients in the TNT cohort received greater percentages of the planned oxaliplatin and fluorouracil prescribed dose than those in the chemoRT with planned adjuvant chemotherapy cohort. The complete response (CR) rate, including both pathologic CR (pCR) in those who underwent surgery and sustained clinical CR (cCR) for at least 12 months posttreatment in those who did not undergo surgery, was 36% in the TNT cohort compared with 21% in the chemoRT with planned adjuvant chemotherapy cohort. Our findings provide additional support for the National Comprehensive Cancer Network (NCCN) guidelines that categorize TNT as a viable treatment strategy for rectal cancer. Our data suggest that TNT facilitates delivery of planned systemic therapy. Long-term follow-up will determine if this finding translates into improved survival. In addition, given its high CR rate, TNT may facilitate nonoperative treatment strategies aimed at organ preservation.

Maladaptive Neural Synchrony in Tinnitus: Origin and Restoration

PubMed Central

Eggermont, Jos J.; Tass, Peter A.

2015-01-01

Tinnitus is the conscious perception of sound heard in the absence of physical sound sources external or internal to the body, reflected in aberrant neural synchrony of spontaneous or resting-state brain activity. Neural synchrony is generated by the nearly simultaneous firing of individual neurons, of the synchronization of membrane-potential changes in local neural groups as reflected in the local field potentials, resulting in the presence of oscillatory brain waves in the EEG. Noise-induced hearing loss, often resulting in tinnitus, causes a reorganization of the tonotopic map in auditory cortex and increased spontaneous firing rates and neural synchrony. Spontaneous brain rhythms rely on neural synchrony. Abnormal neural synchrony in tinnitus appears to be confined to specific frequency bands of brain rhythms. Increases in delta-band activity are generated by deafferented/deprived neuronal networks resulting from hearing loss. Coordinated reset (CR) stimulation was developed in order to specifically counteract such abnormal neuronal synchrony by desynchronization. The goal of acoustic CR neuromodulation is to desynchronize tinnitus-related abnormal delta-band oscillations. CR neuromodulation does not require permanent stimulus delivery in order to achieve long-lasting desynchronization or even a full-blown anti-kindling but may have cumulative effects, i.e., the effect of different CR epochs separated by pauses may accumulate. Unlike other approaches, acoustic CR neuromodulation does not intend to reduce tinnitus-related neuronal activity by employing lateral inhibition. The potential efficacy of acoustic CR modulation was shown in a clinical proof of concept trial, where effects achieved in 12 weeks of treatment delivered 4–6 h/day persisted through a preplanned 4-week therapy pause and showed sustained long-term effects after 10 months of therapy, leading to 75% responders. PMID:25741316

State-by-state variations in cardiac rehabilitation participation are associated with educational attainment, income, and program availability.

PubMed

Gaalema, Diann E; Higgins, Stephen T; Shepard, Donald S; Suaya, Jose A; Savage, Patrick D; Ades, Philip A

2014-01-01

Wide geographic variations in cardiac rehabilitation (CR) participation in the United States have been demonstrated but are not well understood. Socioeconomic factors such as educational attainment are robust predictors of many health-related behaviors, including smoking, obesity, physical activity, substance abuse, and cardiovascular disease. We investigated potential associations between state-level differences in educational attainment, other socioeconomic factors, CR program availability, and variations in CR participation. A retrospective database analysis was conducted using data from the US Census Bureau, the Centers for Disease Control and Prevention, and the 1997 Medicare database. The outcome of interest was CR participation rates by state, and predictors included state-level high school (HS) graduation rates (in 2001 and 1970), median household income, smoking rates, density of CR program (programs per square mile and per state population), sex and race ratios, and median age. The relationship between HS graduation rates and CR participation by state was significant for both 2001 and 1970 (r = 0.64 and 0.44, respectively, P < .01). Adding the density of CR programs (per population) and income contributed significantly with a cumulative r value of 0.74 and 0.71 for the models using 2001 and 1970, respectively (Ps < .01). The amount of variance accounted for by each of the 3 variables differed between the 2000 and 1970 graduation rates, but both models were unaltered by including additional variables. State-level HS graduation rates, CR programs expressed as programs per population, and median income were strongly associated with geographic variations in CR participation rates.

Modelling biological Cr(VI) reduction in aquifer microcosm column systems.

PubMed

Molokwane, Pulane E; Chirwa, Evans M N

2013-01-01

Several chrome processing facilities in South Africa release hexavalent chromium (Cr(VI)) into groundwater resources. Pump-and-treat remediation processes have been implemented at some of the sites but have not been successful in reducing contamination levels. The current study is aimed at developing an environmentally friendly, cost-effective and self-sustained biological method to curb the spread of chromium at the contaminated sites. An indigenous Cr(VI)-reducing mixed culture of bacteria was demonstrated to reduce high levels of Cr(VI) in laboratory samples. The effect of Cr(VI) on the removal rate was evaluated at concentrations up to 400 mg/L. Following the detailed evaluation of fundamental processes for biological Cr(VI) reduction, a predictive model for Cr(VI) breakthrough through aquifer microcosm reactors was developed. The reaction rate in batch followed non-competitive rate kinetics with a Cr(VI) inhibition threshold concentration of approximately 99 mg/L. This study evaluates the application of the kinetic parameters determined in the batch reactors to the continuous flow process. The model developed from advection-reaction rate kinetics in a porous media fitted best the effluent Cr(VI) concentration. The model was also used to elucidate the logistic nature of biomass growth in the reactor systems.

Bioprocess development for hexavalent chromium reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turick, C.E.; Apel, W.A.

1996-10-01

Hexavalent chromium (Cr(VI)) exists in the environment from anthropogenic activity and is regarded as a highly mobile and toxic pollutant. There is considerable interest in developing effective and efficient methods for the remediation of contaminated media. Many bacterial isolates have been demonstrated to metabolically reduce Cr(VI) to Cr(III), a much less toxic, more easily recoverable form of chromium. Aerobic and anaerobic cultures of Cr(VI) reducing bacteria were analyzed for their ability to reduce Cr(VI) prior to bioreactor design and scale up. Batch studies demonstrated Cr(VI) reduction rates with aerobic bacteria of up to 3 mg/hr/g dry cells, while anaerobic culturesmore » exhibited Cr(VI) reduction rates up to 22 mg/hr/g dry cells. An aerobic mixed culture of Cr(VI) reducing bacteria was chosen for bioreactor studies due to better rates of Cr(VI) reduction as well as the robust nature of the culture. These properties will allow for ease in bioprocess operation in the field.« less

Cluster based architecture and network maintenance protocol for medical priority aware cognitive radio based hospital.

PubMed

Al Mamoon, Ishtiak; Muzahidul Islam, A K M; Baharun, Sabariah; Ahmed, Ashir; Komaki, Shozo

2016-08-01

Due to the rapid growth of wireless medical devices in near future, wireless healthcare services may face some inescapable issue such as medical spectrum scarcity, electromagnetic interference (EMI), bandwidth constraint, security and finally medical data communication model. To mitigate these issues, cognitive radio (CR) or opportunistic radio network enabled wireless technology is suitable for the upcoming wireless healthcare system. The up-to-date research on CR based healthcare has exposed some developments on EMI and spectrum problems. However, the investigation recommendation on system design and network model for CR enabled hospital is rare. Thus, this research designs a hierarchy based hybrid network architecture and network maintenance protocols for previously proposed CR hospital system, known as CogMed. In the previous study, the detail architecture of CogMed and its maintenance protocols were not present. The proposed architecture includes clustering concepts for cognitive base stations and non-medical devices. Two cluster head (CH selector equations are formulated based on priority of location, device, mobility rate of devices and number of accessible channels. In order to maintain the integrity of the proposed network model, node joining and node leaving protocols are also proposed. Finally, the simulation results show that the proposed network maintenance time is very low for emergency medical devices (average maintenance period 9.5 ms) and the re-clustering effects for different mobility enabled non-medical devices are also balanced.

Expected net present value of pure and mixed sexed semen artificial insemination strategies in dairy heifers.

PubMed

Olynk, N J; Wolf, C A

2007-05-01

Sexed semen has been a long-anticipated tool for dairy farmers to obtain more heifer calves, but challenges exist for integrating sexed semen into commercial dairy farm reproduction programs. The decreased conception rates (CR) experienced with sexed semen make virgin heifers better suited for insemination with sexed semen than lactating dairy cows. This research sought to identify when various sexed semen breeding strategies provided higher expected net present value (NPV) than conventional artificial insemination (AI) breeding schemes, indicating which breeding scheme is advisable under various scenarios. Budgets were developed to calculate the expected NPV of various AI breeding strategies incorporating conventional (non-sexed) and sexed semen. In the base budgets, heifer and bull calf values were held constant at $500 and $110, respectively. The percentage of heifers expected to be born after breeding with conventional and sexed semen used was 49.2 and 90%, respectively. Breeding costs per AI were held constant at $15.00 per AI for conventional semen and $45.00 per AI for sexed semen of approximately the same genetic value. Conventional semen CR of 58 and 65% were used, and an AI submission rate was set at 100%. Breeding strategies with sexed semen were assessed for breakeven heifer calf values and sexed semen costs to obtain a NPV equal to that achieved with conventional semen. Breakeven heifer calf values for pure sexed semen strategies with a constant 58 and 65% base CR in which sexed semen achieved 53% of the base CR are $732.11 and $664.26, respectively. Breakeven sexed semen costs per AI of $17.16 and $22.39, compared with $45.00 per AI, were obtained to obtain a NPV equal to that obtained with pure conventional semen for base CR of 58 and 65%, respectively. The strategy employing purely sexed semen, with base CR of both 58 and 65%, yielded a lower NPV than purely conventional semen in all but the best-case scenario in which sexed semen provides 90% of the CR of conventional semen. Other potential advantages of sexed semen that were not quantified in the scenarios include biosecurity-related concerns, decreased dystocia due to increased numbers of heifer calves, and implications for internal herd growth.

Oxidative dissolution of pyrite surfaces by hexavalent chromium: Surface site saturation and surface renewal

NASA Astrophysics Data System (ADS)

Graham, Andrew M.; Bouwer, Edward J.

2012-04-01

In-situ reduction of toxic Cr(VI) to nontoxic Cr(III) represents an important natural attenuation process for Cr(VI)-impacted environments. This study investigates the stoichiometry and kinetics of Cr(VI) reduction by pyrite, a reduced iron-sulfur mineral ubiquitous in recent estuarine and marine sediments. Pyrite suspensions at surface loadings of 0.28-2.10 m2/L (typical of estuarine or marine sediments) were capable of completely reducing 7-120 μM Cr(VI) on the timescale of minutes to days, with the time to reaction completion decreasing with increasing pyrite loading, decreasing initial Cr(VI) concentration, and decreasing suspension pH. Analysis of metal species (Cr and Fe) and sulfur species in solution and at the mineral surface indicated that Cr(VI) oxidatively dissolved the pyrite surface, releasing ferrous iron and sulfate into solution as the reaction progressed. Surface disulfide groups were postulated as the Cr(VI)-reactive surface entity. Net production or consumption of aqueous Fe(II) was shown to depend upon the relative rates of proton-promoted Fe(II) release, Fe(II) release due to oxidative dissolution of pyrite in the presence of Cr(VI), and Fe(II) consumption due to homogeneous reaction with Cr(VI). Kinetics of Cr(VI) reduction by pyrite displayed a biphasic pattern, and the time to reaction completion increased dramatically with increasing initial Cr(VI) concentration. Rapid Cr(VI) removal occurred early in the reaction progress, attributable to Cr(VI) loss under an adsorption-limited regime. Slow, approximately zero-order, Cr(VI) removal occurred over the bulk of the time courses, and corresponded to Cr(VI) removal under surface site saturation conditions. Stoichiometric Cr(VI) reduction was able to proceed under surface site limited conditions owing to regeneration of reactive surface sites following desorption/dissolution of oxidized surface products, as demonstrated in repeat Cr(VI)-spiking experiments. The role of surface passivation was evaluated by comparing rates of Cr(VI) reduction in the presence and absence of the Cr(III)-complexing agent citrate. While citrate addition significantly enhanced Cr(III) solubility, rates of Cr(VI) reduction were only marginally accelerated, suggesting that Cr(OH)3(s) coatings did not completely block access of Cr(VI) to reactive surface sites on pyrite. Given the rapid rates of Cr(VI) reduction with pyrite under pH and surface coverage conditions typical of natural environments, we propose that Cr(VI) reduction by pyrite be considered in fate and transport models for Cr in contaminated sediments.

Two-dimensional hyperferroelectric metals: A different route to ferromagnetic-ferroelectric multiferroics

NASA Astrophysics Data System (ADS)

Luo, Wei; Xu, Ke; Xiang, Hongjun

2017-12-01

Recently, two-dimensional (2D) multiferroics have attracted a lot of attention due to their fascinating properties and promising applications. Although the ferroelectric (FE)-ferroelastic and ferromagnetic (FM)-ferroelastic multiferroics have been observed/predicted in 2D systems, 2D ferromagnetic-ferroelectric (FM-FE) multiferroics remain to be discovered since FM insulators are very rare. Here we proposed the concept of 2D hyperferroelectric metals, with which the insulating prerequisite for the FM-FE multiferroic is no longer required in 2D systems. We validate the concept of 2D hyperferroelectric metals and 2D metallic FM-FE multiferroics by performing first-principle calculations on 2D CrN and Cr B2 systems. The 2D buckled monolayer CrN is found to be a hyperferroelectic metal with the FM ground state, i.e., a 2D FM-FE multiferroic. With the global optimization approach, we find the 2D Cr B2 system has an antiferromagnetic (AFM)/planar ground state and a FM/FE metastable state, suggesting that it can be used to realize electric field control of magnetism. Our analysis demonstrates that the spin-phonon coupling and metal-metal interaction are two mechanisms for stabilizing the out-of-plane electric polarization in 2D systems. Our work not only extends the concept of FE to metallic systems, but also paves a way to search the long-sought high temperature FM-FE multiferroics.

Which total knee replacement implant should I pick? Correcting the pathology: the role of knee bearing designs.

PubMed

Berend, K R; Lombardi, A V; Adams, J B

2013-11-01

Debate has raged over whether a cruciate retaining (CR) or a posterior stabilised (PS) total knee replacement (TKR) provides a better range of movement (ROM) for patients. Various sub-sets of CR design are frequently lumped together when comparing outcomes. Additionally, multiple factors have been proven to influence the rate of manipulation under anaesthetic (MUA) following TKR. The purpose of this study was to determine whether different CR bearing insert designs provide better ROM or different MUA rates. All primary TKRs performed by two surgeons between March 2006 and March 2009 were reviewed and 2449 CR-TKRs were identified. The same CR femoral component, instrumentation, and tibial base plate were consistently used. In 1334 TKRs a CR tibial insert with 3° posterior slope and no posterior lip was used (CR-S). In 803 there was an insert with no slope and a small posterior lip (CR-L) and in 312 knees the posterior cruciate ligament (PCL) was either resected or lax and a deep-dish, anterior stabilised insert was used (CR-AS). More CR-AS inserts were used in patients with less pre-operative ROM and greater pre-operative tibiofemoral deformity and flexion contracture (p < 0.05). The mean improvement in ROM was highest for the CR-AS inserts (5.9° (-40° to 55°) vs CR-S 3.1° (-45° to 70°) vs CR-L 3.0° (-45° to 65°); p = 0.004). There was a significantly higher MUA rate with the CR-S and CR-L inserts than CR-AS (Pearson rank 6.51; p = 0.04). Despite sacrificing or not substituting for the PCL, ROM improvement was highest, and the MUA rate was lowest in TKRs with a deep-dish, anterior-stabilised insert. Substitution for the posterior cruciate ligament (PCL) in the form of a PS design may not be necessary even when the PCL is deficient.

AML associated with previous cytotoxic therapy, MDS or myeloproliferative disorders: results from the MRC's 9th AML trial.

PubMed

Hoyle, C F; de Bastos, M; Wheatley, K; Sherrington, P D; Fischer, P J; Rees, J K; Gray, R; Hayhoe, F G

1989-05-01

The outcome of treatment with standard first line therapy of 66 patients with acute myeloid leukaemia (AML) secondary to preceding chemotherapy (Group 1), a myelodysplastic state (Group 2) or a myeloproliferative disorder (Group 3) was analysed in relation to the preceding disorder, the cytogenetic pattern where available, and the cytology and cytochemistry of blood and bone marrow. The complete remission (CR) rate for the secondary AMLs was 36% (24/66), with 24% (16/66) dying in the induction period and 39% (26/66) having resistant disease. The CR rate was 25% (5/20) for Group 1, 42% (15/36) for Group 2, and 40% (4/10) for Group 3. Even after allowance for the generally older age of the secondary AML patients, they still had a significantly poorer CR rate than the de novo AMLs (P = 0.0004). The lower CR rate was chiefly due to resistant disease. Despite this, overall survival was not significantly worse for the secondary AML patients (P = 0.15). For the 36% that achieved remission, remission duration appeared similar to that of de novo cases. Of 62 cases with adequate cytology, 38 (61%) had evidence of erythroid and/or megakaryocytic dysplasia with a CR rate of 32% (12/38). The CR rate of these multineage leukaemias was not significantly different from that of the 24 (39%) who showed granulocyte/monocyte precursor involvement only, 42% (10) of whom achieved CR. The presence of features of differentiation within blast cells such as Auer rods or sudanophilia (greater than 50% positive blasts) was associated with a higher remission rate 47% (18/38) than that of poorly differentiated cases 17% (3/18) (P = 0.04) and thus appeared to be a more important determinant of CR achievement than was lineage involvement. Cases with a normal karyotype had a 33% (7/21) CR rate, while those with chromosomal abnormalities had a 37% (9/24) CR rate. Only 12 of the 45 cases with adequate cytogenetic analysis showed deletions or monosomies involving chromosomes 5 or 7, and seven of these were in Group 1.

Lattice relations and solidification of the complex regular eutectic (Cr,Fe)-(Cr,Fe)23C6

NASA Astrophysics Data System (ADS)

Lai, Hsuan-Han; Hsieh, Chih-Chun; Lin, Chi-Ming; Wu, Weite

2017-05-01

The eutectic (Cr,Fe)-(Cr,Fe)23C6 showed a triaxial fishbone structure and could be categorized as a "complex regular structure". In this study, the lattice relations of the fishbone (Cr,Fe)23C6 were examined and the solidification process was observed using a transmission electron microscope and a confocal laser scanning microscope. For one of the three fish bones in a eutectic cell, parallel (Cr,Fe)23C6 lamellas at one side of the spine had the same lattice direction, as did those in the (Cr,Fe) phase. The lattices of neighboring (Cr,Fe)23C6 and (Cr,Fe) phases were not coherent. Lamellar (Cr,Fe)23C6 on opposite sides of a spine had different lattice directions, and their lattice boundary was in the spine. By using the confocal laser scanning microscope, the solidification of lamellar eutectic structure could be observed. At the low cooling rate of 5 o C·min-1, parallel lamellas would grow thick blocks instead of thin plates. To obtain a thin lamellar eutectic structure, the cooling rate should be higher, like the rate in welding.

Modelling Accident Tolerant Fuel Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hales, Jason Dean; Gamble, Kyle Allan Lawrence

2016-05-01

The catastrophic events that occurred at the Fukushima-Daiichi nuclear power plant in 2011 have led to widespread interest in research of alternative fuels and claddings that are proposed to be accident tolerant. The United States Department of Energy (DOE) through its Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has funded an Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The ATF HIP is a three-year project to perform research on two accident tolerant concepts. The final outcome of the ATF HIP will be an in-depth report to the DOE Advanced Fuels Campaign (AFC) giving a recommendation on whether eithermore » of the two concepts should be included in their lead test assembly scheduled for placement into a commercial reactor in 2022. The two ATF concepts under investigation in the HIP are uranium silicide fuel and iron-chromium-aluminum (FeCrAl) alloy cladding. Utilizing the expertise of three national laboratory participants (Idaho National Laboratory, Los Alamos National Laboratory, and Argonne National Laboratory), a comprehensive multiscale approach to modeling is being used that includes atomistic modeling, molecular dynamics, rate theory, phase-field, and fuel performance simulations. Model development and fuel performance analysis are critical since a full suite of experimental studies will not be complete before AFC must prioritize concepts for focused development. In this paper, we present simulations of the two proposed accident tolerance fuel systems: U3Si2 fuel with Zircaloy-4 cladding, and UO2 fuel with FeCrAl cladding. Sensitivity analyses are completed using Sandia National Laboratories’ Dakota software to determine which input parameters (e.g., fuel specific heat) have the greatest influence on the output metrics of interest (e.g., fuel centerline temperature). We also outline the multiscale modelling approach being employed. Considerable additional work is required prior to preparing the recommendation report for the Advanced Fuels Campaign.« less

Cr(3+) Binding to DNA Backbone Phosphate and Bases: Slow Ligand Exchange Rates and Metal Hydrolysis.

PubMed

Zhou, Wenhu; Yu, Tianmeng; Vazin, Mahsa; Ding, Jinsong; Liu, Juewen

2016-08-15

The interaction between chromium ions and DNA is of great interest in inorganic chemistry, toxicology, and analytical chemistry. Most previous studies focused on in situ reduction of Cr(VI), producing Cr(3+) for DNA binding. Recently, Cr(3+) was reported to activate the Ce13d DNAzyme for RNA cleavage. Herein, the Ce13d is used to study two types of Cr(3+) and DNA interactions. First, Cr(3+) binds to the DNA phosphate backbone weakly through reversible electrostatic interactions, which is weakened by adding competing inorganic phosphate. However, Cr(3+) coordinates with DNA nucleobases forming stable cross-links that can survive denaturing gel electrophoresis condition. The binding of Cr(3+) to different nucleobases was further studied in terms of binding kinetics and affinity by exploiting carboxyfluorescein-labeled DNA homopolymers. Once binding takes place, the stable Cr(3+)/DNA complex cannot be dissociated by EDTA, attributable to the ultraslow ligand exchange rate of Cr(3+). The binding rate follows the order of G > C > T ≈ A. Finally, Cr(3+) gradually loses its DNA binding ability after being stored at neutral or high pH, attributable to hydrolysis. This hydrolysis can be reversed by lowering the pH. This work provides a deeper insight into the bioinorganic chemistry of Cr(3+) coordination with DNA, clarifies some inconsistency in the previous literature, and offers practically useful information for generating reproducible results.

Low Estrogen Receptor (ER)-Positive Breast Cancer and Neoadjuvant Systemic Chemotherapy: Is Response Similar to Typical ER-Positive or ER-Negative Disease?

PubMed

Landmann, Alessandra; Farrugia, Daniel J; Zhu, Li; Diego, Emilia J; Johnson, Ronald R; Soran, Atilla; Dabbs, David J; Clark, Beth Z; Puhalla, Shannon L; Jankowitz, Rachel C; Brufsky, Adam M; Ahrendt, Gretchen M; McAuliffe, Priscilla F; Bhargava, Rohit

2018-05-08

Pathologic complete response (pCR) rate after neoadjuvant chemotherapy was compared between 141 estrogen receptor (ER)-negative (43%), 41 low ER+ (13%), 47 moderate ER+ (14%), and 98 high ER+ (30%) tumors. Human epidermal growth factor receptor 2-positive cases, cases without semiquantitative ER score, and patients treated with neoadjuvant endocrine therapy alone were excluded. The pCR rate of low ER+ tumors was similar to the pCR rate of ER- tumors (37% and 26% for low ER and ER- respectively, P = .1722) but significantly different from the pCR rate of moderately ER+ (11%, P = .0049) and high ER+ tumors (4%, P < .0001). Patients with pCR had an excellent prognosis regardless of the ER status. In patients with residual disease (no pCR), the recurrence and death rate were higher in ER- and low ER+ cases compared with moderate and high ER+ cases. Low ER+ breast cancers are biologically similar to ER- tumors. Semiquantitative ER H-score is an important determinant of response to neoadjuvant chemotherapy.

Comparison of integrated testlet and constructed-response question formats

NASA Astrophysics Data System (ADS)

Slepkov, Aaron D.; Shiell, Ralph C.

2014-12-01

Constructed-response (CR) questions are a mainstay of introductory physics textbooks and exams. However, because of the time, cost, and scoring reliability constraints associated with this format, CR questions are being increasingly replaced by multiple-choice (MC) questions in formal exams. The integrated testlet (IT) is a recently developed question structure designed to provide a proxy of the pedagogical advantages of CR questions while procedurally functioning as set of MC questions. ITs utilize an answer-until-correct response format that provides immediate confirmatory or corrective feedback, and they thus allow not only for the granting of partial credit in cases of initially incorrect reasoning, but, furthermore, the ability to build cumulative question structures. Here, we report on a study that directly compares the functionality of ITs and CR questions in introductory physics exams. To do this, CR questions were converted to concept-equivalent ITs, and both sets of questions were deployed in midterm and final exams. We find that both question types provide adequate discrimination between stronger and weaker students, with CR questions discriminating slightly better than the ITs. There is some indication that any difference in discriminatory power may result from the baseline score for guessing that is inherent in MC testing. Meanwhile, an analysis of interrater scoring of the CR questions raises serious concerns about the reliability of the granting of partial credit when this traditional assessment technique is used in a realistic (but nonoptimized) setting. Furthermore, we show evidence that partial credit is granted in a valid manner in the ITs. Thus, together with consideration of the vastly reduced costs of administering IT-based examinations compared to CR-based examinations, our findings indicate that ITs are viable replacements for CR questions in formal examinations where it is desirable both to assess concept integration and to reward partial knowledge, while efficiently scoring examinations.

Transport of chromium and selenium in the suboxic zone of a shallow aquifer: Influence of redox and adsorption reactions

USGS Publications Warehouse

Kent, D.B.; Davis, J.A.; Anderson, L.C.D.; Rea, B.A.; Waite, T.D.

1994-01-01

Breakthrough of Cr(VI) (chromate), Se(VI) (selenate), and O2 (dissolved oxygen) was observed in tracer tests conducted in a shallow, sand and gravel aquifer with mildly reducing conditions. Loss of Cr, probably due to reduction of Cr(VI) to Cr(III) and irreversible sorption of Cr(III), occurred along with slight retardation of Cr(VI), owing to reversible sorption. Reduction of Se(VI) and O2 was thermodynamically feasible but did not occur, indicating conditions, were unfavorable to microbial reduction. Cr(VI) reduction by constituents of aquifer sediments did not achieve local equilibrium during transport. The reduction rate was probably limited by incomplete contact between Cr(VI) transported along predominant flow paths and reductants located in regions within aquifer sediments of comparatively low permeability. Scatter in the amount of Cr reduction calculated from individual breakthrough curves at identical distances downgradient probably resulted from heterogeneities in the distribution of reductants in the sediments. Predictive modeling of the transport and fate of redox-sensitive solutes cannot be based strictly on thermodynamic considerations; knowledge of reaction rates is critical. Potentially important mass transfer rate limitations between solutes and reactants in sediments as well as heterogeneities in the distribution of redox properties in aquifers complicate determination of limiting rates for use in predictive simulations of the transport of redox-sensitive contaminants in groundwater.

Using a Three-Dimensional Interactive Model To Teach Environmental Concepts to Visually Impaired Children.

ERIC Educational Resources Information Center

Budd, Julia M.; LaGrow, Steven J.

2000-01-01

A study investigated the efficacy of using the Buddy Road Kit, an interactive, wooden model, to teach environmental concepts to 4 children with visual impairments ages 7 to 11 years old. Results indicate the model was effective in teaching environmental concepts and traffic safety to the children involved. (Contains references.) (CR)

Disparities in Cardiac Rehabilitation Among Individuals from Racial and Ethnic Groups and Rural Communities-A Systematic Review.

PubMed

Castellanos, Luis R; Viramontes, Omar; Bains, Nainjot K; Zepeda, Ignacio A

2018-03-13

Despite the well-described benefits of cardiac rehabilitation (CR) on long-term health outcomes, CR is a resource that is underutilized by a significant proportion of patients that suffer from cardiovascular diseases. The main purpose of this study was to examine disparities in CR referral and participation rates among individuals from rural communities and racial and ethnic minority groups with coronary heart disease (CHD) when compared to the general population. A systematic search of standard databases including MedlLine, PubMed, and Cochrane databases was conducted using keywords that included cardiac rehabilitation, women, race and ethnicity, disparities, and rural populations. Twenty-eight clinical studies from 1990 to 2017 were selected and included 478,955 patients with CHD. The majority of available clinical studies showed significantly lower CR referral and participation rates among individuals from rural communities, women, and racial and ethnic groups when compared to the general population. Similar to geographic region, socioeconomic status (SES) appears to directly impact the use of CR programs. Patients of lower SES have significantly lower CR referral and participation rates than patients of higher SES. Data presented underscores the need for systematic referrals using electronic health records for patients with CHD in order to increase overall CR referral and participation rates of minority populations and other vulnerable groups. Educational programs that target healthcare provider biases towards racial and ethnic groups may help attenuate observed disparities. Alternative modalities such as home-based and internet-based CR programs may also help improve CR participation rates among vulnerable populations.

Column study of chromium(VI) adsorption from electroplating industry by coconut coir pith.

PubMed

Suksabye, Parinda; Thiravetyan, Paitip; Nakbanpote, Woranan

2008-12-15

The removal of Cr(VI) from electroplating wastewater by coir pith was investigated in a fixed-bed column. The experiments were conducted to study the effect of important parameters such as bed depth (40-60cm) and flow rate (10-30ml min(-1)). At 0.05 C(t)/C(0), the breakthrough volume increased as flow rate decreased or a bed depth increased due to an increase in empty bed contact time (EBCT). The bed depth service time model (BDST) fit well with the experimental data in the initial region of the breakthrough curve, while the simulation of the whole curve using non-linear regression analysis was effective using the Thomas model. The adsorption capacity estimated from the BDST model was reduced with increasing flow rate, which was 16.40mg cm(-3) or 137.91mg Cr(VI)g(-1) coir pith for the flow rates of 10ml min(-1) and 14.05mg cm(-3) or 118.20mg Cr(VI)g(-1) coir pith for the flow rates of 30ml min(-1). At the highest bed depth (60cm) and the lowest flow rate (10mlmin(-1)), the maximum adsorption reached 201.47mg Cr(VI)g(-1) adsorbent according to the Thomas model. The column was regenerated by eluting chromium using 2M HNO(3) after adsorption studies. The desorption of Cr(III) in each of three cycles was about 67-70%. The desorption of Cr(III) in each cycle did not reach 100% due to the fact that Cr(V) was present through the reduction of Cr(VI), and was still in coir pith, possibly bound to glucose in the cellulose part of coir pith. Therefore, the Cr(V) complex cannot be desorbed in solution. The evidence of Cr(V) signal was observed in coir pith, alpha-cellulose and holocellulose extracted from coir pith using electron spin resonance (ESR).

Comparison of the Isothermal Oxidation Behavior of As-Cast Cu-17%Cr and Cu-17%Cr-5%Al. Part 1; Oxidation Kinetics

NASA Technical Reports Server (NTRS)

Raj. Sai V.

2008-01-01

The isothermal oxidation kinetics of as-cast Cu-17%Cr and Cu-17%Cr-5%Al in air were studied between 773 and 1173 K under atmospheric pressure. These observations reveal that Cu- 17%Cr-5%Al oxidizes at significantly slower rates than Cu-17%Cr. The rate constants for the alloys were determined from generalized analyses of the data without an a priori assumption of the nature of the oxidation kinetics. Detailed analyses of the isothermal thermogravimetric weight change data revealed that Cu-17%Cr exhibited parabolic oxidation kinetics with an activation energy of 165.9 +/- 9.5 kJ/mol. In contrast, the oxidation kinetics for the Cu-17%Cr- 5%Al alloy exhibited a parabolic oxidation kinetics during the initial stages followed by a quartic relationship in the later stages of oxidation. Alternatively, the oxidation behavior of Cu-17%CR- 5%Al could be better represented by a logarithmic relationship. The parabolic rate constants and activation energy data for the two alloys are compared with literature data to gain insights on the nature of the oxidation mechanisms dominant in these alloys.

Comparison of the Isothermal Oxidation Behavior of As-Cast Cu-17%Cr and Cu-17%Cr-5%Al. Part 1; Oxidation Kinetics

NASA Technical Reports Server (NTRS)

Raj. Sai V.

2008-01-01

The isothermal oxidation kinetics of as-cast Cu-17%Cr and Cu-17%Cr-5%Al in air were studied between 773 and 1173 K under atmospheric pressure. These observations reveal that Cu- 17%Cr-5%Al oxidizes at significantly slower rates than Cu-17%Cr. The rate constants for the alloys were determined from generalized analyses of the data without an a priori assumption of the nature of the oxidation kinetics. Detailed analyses of the isothermal thermogravimetric weight change data revealed that Cu-17%Cr exhibited parabolic oxidation kinetics with an activation energy of 165.9 9.5 kJ mol-1. In contrast, the oxidation kinetics for the Cu-17%Cr- 5%Al alloy exhibited a parabolic oxidation kinetics during the initial stages followed by a quartic relationship in the later stages of oxidation. Alternatively, the oxidation behavior of Cu-17%CR- 5%Al could be better represented by a logarithmic relationship. The parabolic rate constants and activation energy data for the two alloys are compared with literature data to gain insights on the nature of the oxidation mechanisms dominant in these alloys.

Comparison of the Isothermal Oxidation Behavior of As-Cast Cu-17 Percent Cr and Cu-17 Percent Cr-5 Percent Al. Part 1; Oxidation Kinetics

NASA Technical Reports Server (NTRS)

Raj, S. V.

2008-01-01

The isothermal oxidation kinetics of as-cast Cu-17%Cr and Cu-17%Cr-5%Al in air were studied between 773 and 1173 K under atmospheric pressure. These observations reveal that Cu-17%Cr-5%Al oxidizes at significantly slower rates than Cu-17%Cr. The rate constants for the alloys were determined from generalized analyses of the data without an a priori assumption of the nature of the oxidation kinetics. Detailed analyses of the isothermal thermogravimetric weight change data revealed that Cu-17%Cr exhibited parabolic oxidation kinetics with an activation energy of 165.9+/-9.5 kJ/mol. In contrast, the oxidation kinetics for the Cu-17%Cr-5%Al alloy exhibited a parabolic oxidation kinetics during the initial stages followed by a quartic relationship in the later stages of oxidation. Alternatively, the oxidation behavior of Cu-17%CR-5%Al could be better represented by a logarithmic relationship. The parabolic rate constants and activation energy data for the two alloys are compared with literature data to gain insights on the nature of the oxidation mechanisms dominant in these alloys.

Spectrophotometric Method for the Determination of Atmospheric Cr Pollution as a Factor to Accelerated Corrosion.

PubMed

Homa, Dereje; Haile, Ermias; Washe, Alemayehu P

2017-01-01

The effect of Cr(VI) pollution on the corrosion rate of corrugated iron roof samples collected from tanning industry areas was investigated through simulated laboratory exposure and spectrophotometric detection of Cr(III) deposit as a product of the reaction. The total level of Cr detected in the samples ranged from 113.892 ± 0.17 ppm to 53.05 ± 0.243 ppm and showed increasing trend as sampling sites get closer to the tannery and in the direction of tannery effluent stream. The laboratory exposure of a newly manufactured material to a simulated condition showed a relatively faster corrosion rate in the presence of Cr(VI) with concomitant deposition of Cr(III) under pH control. A significant ( P = 0.05) increase in the corrosion rate was also recorded when exposing scratched or stress cracked samples. A coupled redox process where Cr(VI) is reduced to a stable, immobile, and insoluble Cr(III) accompanying corrosion of the iron is proposed as a possible mechanism leading to the elevated deposition of the latter on the materials. In conclusion, the increased deposits of Cr detected in the corrugated iron roof samples collected from tanning industry zones suggested possible atmospheric Cr pollution as a factor to the accelerated corrosion of the materials.

Redox transformation and reductive immobilization of Cr(VI) in the Columbia River hyporheic zone sediments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Fen; Liu, Yuanyuan; Zachara, John

An experimental and modeling study was conducted to investigate the redox transformation and reductive immobilization of groundwater contaminant Cr in hyporheic zone (HZ) sediments from U.S. Department of Energy’s Hanford site, where groundwater Cr(VI) is migrating and discharging to the nearby Columbia River. Experimental results revealed that Cr(VI) can be reduced to immobile reduced Cr by the HZ sediments in the presence/absence of O2. Anaerobic pre-incubation of the sediments increased the effective rate of Cr reduction that was correlated with the increase in HCl-extractable Fe(II) content in the sediments. The reduced Cr was stable in exposure to O2 under field-relevantmore » pH (~7.5) and Mn-containing (~0.02% w/w) conditions. The Cr(VI) reduction rate showed a multi-rate behavior, apparently reflecting the presence of reductants with different reactivity in the sediments. The results from this study indicated that the HZ sediments can reductively immobilize Cr and the sediment redox capacity can be recharged through microbial activities. The results implied that HZ can play a role as a natural permeable redox barrier for removing groundwater Cr before it discharges into a river system.« less

Redox transformation and reductive immobilization of Cr(VI) in the Columbia River hyporheic zone sediments

NASA Astrophysics Data System (ADS)

Xu, Fen; Liu, Yuanyuan; Zachara, John; Bowden, Mark; Kennedy, David; Plymale, Andrew E.; Liu, Chongxuan

2017-12-01

An experimental and modeling study was conducted to investigate the redox transformation and reductive immobilization of groundwater contaminant Cr in hyporheic zone (HZ) sediments from U.S. DOE's Hanford Site, where groundwater Cr(VI) is migrating and discharging to the nearby Columbia River. Experimental results revealed that Cr(VI) can be reduced and immobilized by the HZ sediments in the presence/absence of O2. Anaerobic pre-incubation of the sediments increased the effective rate of Cr reduction that was correlated with the increase in HCl-extractable Fe(II) content in the sediments. The reduced Cr was stable when exposed to O2 under field-relevant pH (7.5) with and without dissolved Mn(II), which might be oxidized to form Mn(III/IV) oxides that may oxidize reduced Cr. The Cr(VI) reduction rate showed a multi-rate behavior, apparently reflecting the presence of reductants with different reactivity in the sediments. The results from this study indicated that the HZ sediments can reductively immobilize Cr and the sediment redox capacity can be recharged through microbial activities. The results implied that HZ can play a role as a natural permeable redox barrier for removing groundwater Cr before it discharges into a river system.

Spectrophotometric Method for the Determination of Atmospheric Cr Pollution as a Factor to Accelerated Corrosion

PubMed Central

Homa, Dereje; Haile, Ermias

2017-01-01

The effect of Cr(VI) pollution on the corrosion rate of corrugated iron roof samples collected from tanning industry areas was investigated through simulated laboratory exposure and spectrophotometric detection of Cr(III) deposit as a product of the reaction. The total level of Cr detected in the samples ranged from 113.892 ± 0.17 ppm to 53.05 ± 0.243 ppm and showed increasing trend as sampling sites get closer to the tannery and in the direction of tannery effluent stream. The laboratory exposure of a newly manufactured material to a simulated condition showed a relatively faster corrosion rate in the presence of Cr(VI) with concomitant deposition of Cr(III) under pH control. A significant (P = 0.05) increase in the corrosion rate was also recorded when exposing scratched or stress cracked samples. A coupled redox process where Cr(VI) is reduced to a stable, immobile, and insoluble Cr(III) accompanying corrosion of the iron is proposed as a possible mechanism leading to the elevated deposition of the latter on the materials. In conclusion, the increased deposits of Cr detected in the corrugated iron roof samples collected from tanning industry zones suggested possible atmospheric Cr pollution as a factor to the accelerated corrosion of the materials. PMID:28469950

Acute effects and after-effects of acoustic coordinated reset neuromodulation in patients with chronic subjective tinnitus.

PubMed

Adamchic, Ilya; Toth, Timea; Hauptmann, Christian; Walger, Martin; Langguth, Berthold; Klingmann, Ingrid; Tass, Peter Alexander

2017-01-01

Chronic subjective tinnitus is an auditory phantom phenomenon characterized by abnormal neuronal synchrony in the central auditory system. As shown computationally, acoustic coordinated reset (CR) neuromodulation causes a long-lasting desynchronization of pathological synchrony by downregulating abnormal synaptic connectivity. In a previous proof of concept study acoustic CR neuromodulation, employing stimulation tone patterns tailored to the dominant tinnitus frequency, was compared to noisy CR-like stimulation, a CR version significantly detuned by sparing the tinnitus-related pitch range and including substantial random variability of the tone spacing on the frequency axis. Both stimulation protocols caused an acute relief as measured with visual analogue scale scores for tinnitus loudness (VAS-L) and annoyance (VAS-A) in the stimulation-ON condition (i.e. 15 min after stimulation onset), but only acoustic CR neuromodulation had sustained long-lasting therapeutic effects after 12 weeks of treatment as assessed with VAS-L, VAS-A scores and a tinnitus questionnaire (TQ) in the stimulation-OFF condition (i.e. with patients being off stimulation for at least 2.5 h). To understand the source of the long-lasting therapeutic effects, we here study whether acoustic CR neuromodulation has different electrophysiological effects on oscillatory brain activity as compared to noisy CR-like stimulation under stimulation-ON conditions and immediately after cessation of stimulation. To this end, we used a single-blind, single application, cross over design in 18 patients with chronic tonal subjective tinnitus and administered three different 16-minute stimulation protocols: acoustic CR neuromodulation, noisy CR-like stimulation and low frequency range (LFR) stimulation, a CR type stimulation with deliberately detuned pitch and repetition rate of stimulation tones, as control stimulation. We measured VAS-L and VAS-A scores together with spontaneous EEG activity pre-, during- and post-stimulation. Under stimulation-ON conditions acoustic CR neuromodulation and noisy CR-like stimulation had similar effects: a reduction of VAS-L and VAS-A scores together with a decrease of auditory delta power and an increase of auditory alpha and gamma power, without significant differences. In contrast, LFR stimulation had significantly weaker EEG effects and no significant clinical effects under stimulation-ON conditions. The distinguishing feature between acoustic CR neuromodulation and noisy CR-like stimulation were the electrophysiological after-effects. Acoustic CR neuromodulation caused the longest significant reduction of delta and gamma and increase of alpha power in the auditory cortex region. Noisy CR-like stimulation had weaker and LFR stimulation hardly any electrophysiological after-effects. This qualitative difference further supports the assertion that long-term effects of acoustic CR neuromodulation on tinnitus are mediated by a specific disruption of synchronous neural activity. Furthermore, our results indicate that acute electrophysiological after-effects might serve as a marker to further improve desynchronizing sound stimulation.

Effect of cloric acid concentration on corrosion behavior of Ni/Cr coated on carbon steel

NASA Astrophysics Data System (ADS)

Desiati, Resetiana Dwi; Sugiarti, Eni; Thosin, K. A. Zaini

2018-05-01

Corrosion is one of the causes of metal degradation. Carbon steel (Fe) is easy to corrode in the extreme environment. Coating on carbon steel is required to improve corrosion resistance owing to protection or hindrance to extreme environmental conditions. In this present work, carbon steel was coated by electroplating techniques for nickel and pack cementation for chrome. The corrosion rate test was performed by Weight Loss method on FeNiCr, FeNi, FeCr and uncoated Fe as comparator which was dyed in 37% HCl and 25% HCl which had previously been measured dimension and mass. The immersion test result of FeNiCr and FeNi specimen were better than FeCr and uncoated Fe in terms of increasing corrosion resistance. The corrosion rate for 56 hours in 37% HCl for FeNiCr was 1.592 mm/y and FeNi was 3.208 mm/y, FeCr only lasted within 32 hours with corrosion rate was 6.494 mm/y. Surface of the sample after the corrosion test there was pitting, crevice corrosion and alloy cracking caused by chloride. The higher the concentration of HCl the faster the corrosion rate.

Reduction of hexavalent chromium by fasted and fed human gastric fluid. II. Ex vivo gastric reduction modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirman, Christopher R., E-mail: ckirman@summittoxi

To extend previous models of hexavalent chromium [Cr(VI)] reduction by gastric fluid (GF), ex vivo experiments were conducted to address data gaps and limitations identified with respect to (1) GF dilution in the model; (2) reduction of Cr(VI) in fed human GF samples; (3) the number of Cr(VI) reduction pools present in human GF under fed, fasted, and proton pump inhibitor (PPI)-use conditions; and (4) an appropriate form for the pH-dependence of Cr(VI) reduction rate constants. Rates and capacities of Cr(VI) reduction were characterized in gastric contents from fed and fasted volunteers, and from fasted pre-operative patients treated with PPIs.more » Reduction capacities were first estimated over a 4-h reduction period. Once reduction capacity was established, a dual-spike approach was used in speciated isotope dilution mass spectrometry analyses to characterize the concentration-dependence of the 2nd order reduction rate constants. These data, when combined with previously collected data, were well described by a three-pool model (pool 1 = fast reaction with low capacity; pool 2 = slow reaction with higher capacity; pool 3 = very slow reaction with higher capacity) using pH-dependent rate constants characterized by a piecewise, log-linear relationship. These data indicate that human gastric samples, like those collected from rats and mice, contain multiple pools of reducing agents, and low concentrations of Cr(VI) (< 0.7 mg/L) are reduced more rapidly than high concentrations. The data and revised modeling results herein provide improved characterization of Cr(VI) gastric reduction kinetics, critical for Cr(VI) pharmacokinetic modeling and human health risk assessment. - Highlights: • SIDMS allows for measurement of Cr(VI) reduction rate in gastric fluid ex vivo • Human gastric fluid has three reducing pools • Cr(VI) in drinking water at < 0.7 mg/L is rapidly reduced in human gastric fluid • Reduction rate is concentration- and pH-dependent • A refined PK model is used to characterize inter-individual variability in Cr(VI) gastric reduction capacity.« less

A Weakest-Link Approach for Fatigue Limit of 30CrNiMo8 Steels (Preprint)

DTIC Science & Technology

2011-03-01

34Application of a Weakest-Link Concept to the Fatigue Limit of the Bearing Steel Sae 52100 in a Bainitic Condition," Fatigue and Fracture of...AFRL-RX-WP-TP-2011-4206 A WEAKEST-LINK APPROACH FOR FATIGUE LIMIT OF 30CrNiMo8 STEELS (PREPRINT) S. Ekwaro-Osire and H.V. Kulkarni Texas...2011 4. TITLE AND SUBTITLE A WEAKEST-LINK APPROACH FOR FATIGUE LIMIT OF 30CrNiMo8 STEELS (PREPRINT) 5a. CONTRACT NUMBER In-house 5b. GRANT

Tinnitus--Current Concepts in Diagnosis and Management.

ERIC Educational Resources Information Center

Epstein, Stephen

1997-01-01

This article discusses the causes of tinnitus, sound or noise in the ears or head without any external stimulation. Classification of tinnitus, the essentials of medical evaluation of a patient with tinnitus, essential test procedures, and current concepts in the management of tinnitus are addressed. (CR)

Effect of long-term caloric restriction on oxygen consumption and body temperature in two different strains of mice

PubMed Central

Ferguson, Melissa; Sohal, Barbara H.; Forster, Michael J.; Sohal, Rajindar S.

2007-01-01

The hypothesis, that a decrease in metabolic rate mediates the life span prolonging effect of caloric restriction (CR), was tested using two strains of mice, one of which, C57BL/6, exhibits life span extension as a result of CR, while the other, DBA/2, shows little or no effect. Comparisons of the rate of resting oxygen consumption and body temperature were made between the strains after they were fed ad libitum (AL) or maintained under 40% CR, from 4 to 16 months of age. Ad libitum-fed mice of the two strains weighed the same when young and consumed similar amounts of food throughout the experiment; however, the C57BL/6 mice weighed 25% more than DBA/2 mice at 15 months of age. The rate of oxygen consumption was normalized as per gram body weight, lean body mass or organ weight as well as per animal. The body temperature and the rate of oxygen consumption, expressed according to all of the four criteria, were decreased in the DBA/2 mice following CR. The C57BL/6 mice also showed a CR-related decrease in body temperature and in the rate of oxygen consumption per animal and when normalized according to lean body mass or organ weight. The results of this study indicate that CR indeed lowers the rate of metabolism; however, this effect by CR does not necessarily entail the prolongation of the life span of mice. PMID:17822741

Effect of long-term caloric restriction on oxygen consumption and body temperature in two different strains of mice.

PubMed

Ferguson, Melissa; Sohal, Barbara H; Forster, Michael J; Sohal, Rajindar S

2007-10-01

The hypothesis, that a decrease in metabolic rate mediates the life span prolonging effect of caloric restriction (CR), was tested using two strains of mice, one of which, C57BL/6, exhibits life span extension as a result of CR, while the other, DBA/2, shows little or no effect. Comparisons of the rate of resting oxygen consumption and body temperature were made between the strains after they were fed ad libitum (AL) or maintained under 40% CR, from 4 to 16 months of age. Ad libitum-fed mice of the two strains weighed the same when young and consumed similar amounts of food throughout the experiment; however, the C57BL/6 mice weighed 25% more than DBA/2 mice at 15 months of age. The rate of oxygen consumption was normalized as per gram body weight, lean body mass or organ weight as well as per animal. The body temperature and the rate of oxygen consumption, expressed according to all of the four criteria, were decreased in the DBA/2 mice following CR. The C57BL/6 mice also showed a CR-related decrease in body temperature and in the rate of oxygen consumption per animal and when normalized according to lean body mass or organ weight. The results of this study indicate that CR indeed lowers the rate of metabolism; however, this effect by CR does not necessarily entail the prolongation of the life span of mice.

Corrosion of Alloy 690 process pot by sulfate containing high level radioactive waste at feed stage

NASA Astrophysics Data System (ADS)

Sengupta, P.; Soudamini, N.; Kaushik, C. P.; Jagannath; Mishra, R. K.; Kale, G. B.; Raj, K.; Das, D.; Sharma, B. P.

2008-02-01

Prolonged exposure of Alloy 690 process pot to sulfate containing high level radioactive waste leads to (a) depletion of Cr from the alloy, (b) intergranular attack and (c) building up of Cr 2O 3-Ni 2O 3-Fe 2O 3 mixed oxide surface layer containing Na and Cs sulfate precipitates. Time dependence of material loss from Alloy 690 is found to follow a linear relationship of the type Δ w (material loss) = -7.05 + 0.05 t. Corrosion rate calculated for 2400 h exposure is 3.66 mpy. Cr and Ni leach rates obtained for the same sample are 1.61 g m -2 d -1 and 2.52 g m -2 d -1, respectively. Ni leach rates followed a linear time dependence relationship of the type dNL Ni/d t (leach rate) = -0.09 + 0.027 t, whereas Cr leach rates obeyed a non-linear relationship of the type dNL Cr/d t (leach rate) = 0.241 + 0.027 t - 1.33 × 10 -4t1/2.

The General Isothermal Oxidation Behavior of Cu-8Cr-4Nb

NASA Technical Reports Server (NTRS)

Thomas-Ogbuji, L. U.; Gray, Hugh R. (Technical Monitor)

2002-01-01

Oxidation kinetics of Cu-8Cr-4Nb was investigated by TGA (thermogravimetric) exposures between 500 and 900-C (at 25-50 C intervals) and the oxide scale morphologies examined by microscopy and micro-analysis. Because Cu-8Cr-4Nb is comprised of fine Cr2Nb precipitates in a Cu matrix, the results were interpreted by comparison with the behavior of copper (OFHC) and 'NARloy-Z' (a rival candidate material for thrust cell liner applications in advanced rocket engines) under the same conditions. While NARloy-Z and Cu exhibited identical oxidation behavior, Cu-8Cr-4Nb differed markedly in several respects: below approx. 700 C its oxidation rates were significantly lower than those of Cu; At higher temperatures its oxidation rates fell into two categories: an initial rate exceeding that of Cu, and a terminal rate comparable to that of Cu. Differences in oxide morphologies paralleled the kinetic differences at higher temperature: While NARloy-Z and Cu produced a uniform oxide scale of Cu2O inner layer and CuO outer layer, the inner (Cu2O) layer on Cu-8Cr-4Nb was stratified, with a highly porous/spongy inner stratum (responsible for the fast initial kinetics) and a dense/blocky outer stratum (corresponding to the slow terminal kinetics). Single and spinel oxides of Nb and Cr were found at the interface between the oxide scale and Cu-8Cr-4Nb substrate and it appears that these oxides were responsible for its suppressed oxidation rates at the intermediate temperatures. No difference was found between Cu-8Cr-4Nb oxidation in air and in oxygen at 1.0 atm.

One Dimensional Cold Rolling Effects on Stress Corrosion Crack Growth in Alloy 690 Tubing and Plate Materials

NASA Astrophysics Data System (ADS)

Toloczko, Mychailo B.; Olszta, Matthew J.; Bruemmer, Stephen M.

Stress corrosion crack-growth experiments have been performed on cold-rolled alloy 690 materials in simulated PWR primary water at 360°C. Extruded alloy 690 CRDM tubing in two conditions, thermally treated (TT) and solution annealed (SA), was cold rolled (CR) in one direction to several reductions reaching a maximum of 31% and tested in the S-L orientation. High stress corrosion cracking (SCC) propagation rates ( 8x10-8 mm/s) were observed for the 31%CR alloy 690TT material, while the 31%CR alloy 690SA exhibited 10X lower rates. The difference in intergranular SCC susceptibility appears to be related to grain boundary carbide distribution before cold rolling. SCC growth rates were found to depend on test temperature and hydrogen concentration. Tests were also performed on two alloy 690 plate heats, one CR to a reduction of 26% and the other to 20%. SCC growth rates at 360°C were similar to that measured for the 31%CR alloy 690TT CRDM tubing. Comparisons will be made to other results on CR alloy 690 materials.

Application of High Entropy Alloys in Stent Implants

NASA Astrophysics Data System (ADS)

Alagarsamy, Karthik

High entropy alloys (HEAs) are alloys with five or more principal elements. Due to these distinct concept of alloying, the HEA exhibits unique and superior properties. The outstanding properties of HEA includes higher strength/hardness, superior wear resistance, high temperature stability, higher fatigue life, good corrosion and oxidation resistance. Such characteristics of HEA has been significant interest leading to researches on these emerging field. Even though many works are done to understand the characteristic of these HEAs, very few works are made on how the HEAs can be applied for commercial uses. This work discusses the application of High entropy alloys in biomedical applications. The coronary heart disease, the leading cause of death in the United States kills more than 350,000 persons/year and it costs $108.9 billion for the nation each year in spite of significant advancements in medical care and public awareness. A cardiovascular disease affects heart or blood vessels (arteries, veins and capillaries) or both by blocking the blood flow. As a surgical interventions, stent implants are deployed to cure or ameliorate the disease. However, the high failure rate of stents has lead researchers to give special attention towards analyzing stent structure, materials and characteristics. Many works related to alternate material and/or design are carried out in recent time. This paper discusses the feasibility of CoCrFeNiMn and Al0.1CoCrFeNi HEAs in stent implant application. This work is based on the speculation that CoCrFeNiMn and Al0.1CoCrFeNi HEAs are biocompatible material. These HEAs are characterized to determine the microstructure and mechanical properties. Computational modeling and analysis were carried out on stent implant by applying CoCrFeNiMn and Al0.1CoCrFeNi HEAs as material to understand the structural behavior.

Quantifying Cr(VI) Production and Export from Serpentine Soil of the California Coast Range

DOE PAGES

McClain, Cynthia N.; Fendorf, Scott; Webb, Samuel M.; ...

2016-11-22

Here, hexavalent chromium (Cr(VI)) is generated in serpentine soils and exported to surface and groundwaters at levels above health-based drinking water standards. Although Cr(VI) concentrations are elevated in serpentine soil pore water, few studies have reported field evidence documenting Cr(VI) production rates and fluxes that govern Cr(VI) transport from soil to water sources. We report Cr speciation (i) in four serpentine soil depth profiles derived from the California Coast Range serpentinite belt and (ii) in local surface waters. Within soils, we detected Cr(VI) in the same horizons where Cr(III)-minerals are colocated with biogenic Mn(III/IV)-oxides, suggesting Cr(VI) generation through oxidation bymore » Mn-oxides. Water-extractable Cr(VI) concentrations increase with depth constituting a 7.8 to 12 kg/km 2 reservoir of Cr(VI) in soil. Here, Cr(VI) is produced at a rate of 0.3 to 4.8 kg Cr(VI)/km 2/yr and subsequently flushed from soil during water infiltration, exporting 0.01 to 3.9 kg Cr(VI)/km 2/yr at concentrations ranging from 25 to 172 μg/L. Although soil-derived Cr(VI) is leached from soil at concentrations exceeding 10 μg/L, due to reduction and dilution during transport to streams, Cr(VI) levels measured in local surface waters largely remain below California’s drinking water limit.« less

Quantifying Cr(VI) Production and Export from Serpentine Soil of the California Coast Range.

PubMed

McClain, Cynthia N; Fendorf, Scott; Webb, Samuel M; Maher, Kate

2017-01-03

Hexavalent chromium (Cr(VI)) is generated in serpentine soils and exported to surface and groundwaters at levels above health-based drinking water standards. Although Cr(VI) concentrations are elevated in serpentine soil pore water, few studies have reported field evidence documenting Cr(VI) production rates and fluxes that govern Cr(VI) transport from soil to water sources. We report Cr speciation (i) in four serpentine soil depth profiles derived from the California Coast Range serpentinite belt and (ii) in local surface waters. Within soils, we detected Cr(VI) in the same horizons where Cr(III)-minerals are colocated with biogenic Mn(III/IV)-oxides, suggesting Cr(VI) generation through oxidation by Mn-oxides. Water-extractable Cr(VI) concentrations increase with depth constituting a 7.8 to 12 kg/km 2 reservoir of Cr(VI) in soil. Here, Cr(VI) is produced at a rate of 0.3 to 4.8 kg Cr(VI)/km 2 /yr and subsequently flushed from soil during water infiltration, exporting 0.01 to 3.9 kg Cr(VI)/km 2 /yr at concentrations ranging from 25 to 172 μg/L. Although soil-derived Cr(VI) is leached from soil at concentrations exceeding 10 μg/L, due to reduction and dilution during transport to streams, Cr(VI) levels measured in local surface waters largely remain below California's drinking water limit.

A method for determining customer requirement weights based on TFMF and TLR

NASA Astrophysics Data System (ADS)

Ai, Qingsong; Shu, Ting; Liu, Quan; Zhou, Zude; Xiao, Zheng

2013-11-01

'Customer requirements' (CRs) management plays an important role in enterprise systems (ESs) by processing customer-focused information. Quality function deployment (QFD) is one of the main CRs analysis methods. Because CR weights are crucial for the input of QFD, we developed a method for determining CR weights based on trapezoidal fuzzy membership function (TFMF) and 2-tuple linguistic representation (TLR). To improve the accuracy of CR weights, we propose to apply TFMF to describe CR weights so that they can be appropriately represented. Because the fuzzy logic is not capable of aggregating information without loss, TLR model is adopted as well. We first describe the basic concepts of TFMF and TLR and then introduce an approach to compute CR weights. Finally, an example is provided to explain and verify the proposed method.

Study of multi-kW solar arrays for Earth orbit application

NASA Technical Reports Server (NTRS)

1980-01-01

Planar and concentrator solar array configurations based on silicon and gallium arsenide solar cells were conceptualized and on-orbit maintainability was addressed. Four basic categories emerged: (1) planar (non concentrated) with silicon cells, (2) low-CR (concentration ratio = 3.4) with silicon cells, (3) low-CR with GaAs, and (4) high-CR (concentration ratio = 62.5) with GaAs. A very high-CR (concentration ratio = 200) was investigated but rejected on thermal grounds. Nonrecurring and recurring cost elements for each of the four concepts selected were compared over a 15 year life cycle. Under conditions where the gallium arsenide cells can be produced for less than $25 per 2 x 2 cm, the low CR concentrator emerges as the most cost effective configuration. However, the producibility risk remains higher on the gallium arsenide cell.

Impact of saline aquifer water on surface and shallow pit corrosion of martensitic stainless steels during exposure to CO2 environment (CCS)

NASA Astrophysics Data System (ADS)

Pfennig, Anja; Kranzmann, Axel

2018-05-01

Pipe steels suitable for carbon capture and storage technology (CCS) require resistance against the corrosive environment of a potential CCS-site, e.g. heat, pressure, salinity of the aquifer, CO2-partial pressure. Samples of different mild and high alloyed stainless injection-pipe steels partially heat treated: 42CrMo4, X20Cr13, X46Cr13, X35CrMo4 as well as X5CrNiCuNb16-4 were kept at T=60 °C and ambient pressure as well as p=100 bar for 700 h - 8000 h in a CO2-saturated synthetic aquifer environment similar to possible geological on-shore CCS-sites in the northern German Basin. Main corrosion products are FeCO3 and FeOOH. Corrosion rates obtained at 100 bar are generally much lower than those measured at ambient pressure. Highest surface corrosion rates are 0.8 mm/year for 42CrMo4 and lowest 0.01 mm/year for X5CrNiCuNb16-4 in the vapour phase at ambient pressure. At 100 bar the highest corrosion rates are 0.01 mm/year for 42CrMo4, X20Cr13 (liquid phase), X46Cr13 and less than 0.01 mm/year for X35CrMo4 and X5CrNiCuNb16-4 after 8000 h of exposure with no regard to atmosphere. Martensitic microstructure offers good corrosion resistance.

Femtosecond Cr:LiSAF and Cr:LiCAF lasers pumped by tapered diode lasers.

PubMed

Demirbas, Umit; Schmalz, Michael; Sumpf, Bernd; Erbert, Götz; Petrich, Gale S; Kolodziejski, Leslie A; Fujimoto, James G; Kärtner, Franz X; Leitenstorfer, Alfred

2011-10-10

We report compact, low-cost and efficient Cr:Colquiriite lasers that are pumped by high brightness tapered laser diodes. The tapered laser diodes provided 1 to 1.2 W of output power around 675 nm, at an electrical-to-optical conversion efficiency of about 30%. Using a single tapered diode laser as the pump source, we have demonstrated output powers of 500 mW and 410 mW together with slope efficiencies of 47% and 41% from continuous wave (cw) Cr:LiSAF and Cr:LiCAF lasers, respectively. In cw mode-locked operation, sub-100-fs pulse trains with average power between 200 mW and 250 mW were obtained at repetition rates around 100 MHz. Upon pumping the Cr:Colquiriite lasers with two tapered laser diodes (one from each side of the crystal), we have observed scaling of cw powers to 850 mW in Cr:LiSAF and to 650 mW in Cr:LiCAF. From the double side pumped Cr:LiCAF laser, we have also obtained ~220 fs long pulses with 5.4 nJ of pulse energy at 77 MHz repetition rate. These are the highest energy levels reported from Cr:Colquiriite so far at these repetition rates. Our findings indicate that tapered diodes in the red spectral region are likely to become the standard pump source for Cr:Colquiriite lasers in the near future. Moreover, the simplified pumping scheme might facilitate efficient commercialization of Cr:Colquiriite systems, bearing the potential to significantly boost applications of cw and femtosecond lasers in this spectral region (750-1000 nm).

Removal of hexavalent chromium in soil and groundwater by supported nano zero-valent iron on silica fume.

PubMed

Li, Yongchao; Jin, Zhaohui; Li, Tielong; Li, Shujing

2011-01-01

Silica fume supported-Fe(0) nanoparticles (SF-Fe(0)) were prepared using commercial silica fume as a support. The feasibility of using this SF-Fe(0) for reductive immobilization of Cr(VI) was investigated through batch tests. Compared with unsupported Fe(0), SF-Fe(0) was significantly more active in Cr(VI) removal especially in 84 wt% silica fume loading. Silica fume had also been found to inhibit the formation of Fe(III)/Cr(III) precipitation on Fe nanoparticles' surface, which was increasing the deactivation resistance of iron. Cr(VI) was removed through physical adsorption of Cr(VI) onto the SF-Fe(0) surface and subsequent reduction of Cr(VI) to Cr(III). The rate of reduction of Cr(VI) could be expressed by pseudo first-order reaction kinetics. The rate constant increased with the increase in iron loading but decreased with the increase in initial Cr(VI) concentration. Furthermore, column tests showed that the SF-Fe(0) could be readily transported in model soil.

Participation Rates, Process Monitoring, and Quality Improvement Among Cardiac Rehabilitation Programs in the United States: A NATIONAL SURVEY.

PubMed

Pack, Quinn R; Squires, Ray W; Lopez-Jimenez, Francisco; Lichtman, Steven W; Rodriguez-Escudero, Juan P; Lindenauer, Peter K; Thomas, Randal J

2015-01-01

Although strategies exist for improving cardiac rehabilitation (CR) participation rates, it is unclear how frequently these strategies are used and what efforts are being made by CR programs to improve participation rates. We surveyed all CR program directors in the American Association of Cardiovascular and Pulmonary Rehabilitation's database. Data collection included program characteristics, the use of specific referral and recruitment strategies, and self-reported program participation rates. Between 2007 and 2012, 49% of programs measured referral of inpatients from the hospital, 21% measured outpatient referral from office/clinic, 71% measured program enrollment, and 74% measured program completion rates. Program-reported participation rates (interquartile range) were 68% (32-90) for hospital referral, 35% (15-60) for office/clinic referral, 70% (46-80) for enrollment, and 75% (62-82) for program completion. The majority of programs utilized a hospital-based systematic referral, liaison-facilitated referral, or inpatient CR program referral (64%, 68%, and 60% of the time, respectively). Early appointments (<2 weeks) were utilized by 35%, and consistent phone call appointment reminders were utilized by 50% of programs. Quality improvement (QI) projects were performed by about half of CR programs. Measurement of participation rates was highly correlated with performing QI projects (P < .0001.) : Although programs are aware of participation rate gaps, the monitoring of participation rates is suboptimal, QI initiatives are infrequent, and proven strategies for increasing patient participation are inconsistently utilized. These issues likely contribute to the national CR participation gap and may prove to be useful targets for national QI initiatives.

1100 to 1500 K Slow Plastic Compressive Behavior of NiAl-xCr Single Crystals

NASA Technical Reports Server (NTRS)

Whittenberger, J. Daniel; Darolia, Ram

2003-01-01

The compressive properties of near <001> and <111> oriented NiAl-2Cr single crystals and near <011> oriented NiAl-6Cr samples have been measured between 1100 and 1500 K. The 2Cr addition produced significant solid solution strengthening in NiAl, and the <111> and <001> single crystals possessed similar strengths. The 6Cr crystals were not stronger than the 2Cr versions. At 1100 and 1200 K plastic flow in all three Cr-modified materials was highly dependent on stress with exponents > 10. The <011> oriented 6Cr alloy exhibited a stress exponent of about 8 at 1400 and 1500 K; whereas both <001> and <111> NiAl-2Cr crystals possessed stress exponents near 3 which is indicative of a viscous dislocation glide creep mechanism. While the Cottrell-Jaswon solute drag model predicted creep rates within a factor of 3 at 1500 K for <001>-oriented NiAl-2Cr; this mechanism greatly over predicted creep rates for other orientations and at 1400 K for <001> crystals.

Homogeneous and Heterogeneous (Fex, Cr1-x)(OH)3 Precipitation: Implications for Cr Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Chong; Zuo, Xiaobing; Cao, B

2016-02-16

The formation of (Fe, Cr)(OH)3 nanoparticles determines the fate of aqueous Cr in many aquatic environments. Using small angle X-ray scattering, precipitation rates of (Fe, Cr)(OH)3 nanoparticles in solution and on quartz were quantified from 0.1 mM Fe(III) solutions containing 0 – 0.25 mM Cr(III) at pH = 3.7 ± 0.2. Concentration ratio of aqueous Cr(III)/Fe(III) controlled the chemical composition (x) of (Fex, Cr1-x)(OH)3 precipitates, solutions’ supersaturation with respect to precipitates, and the surface charge of quartz. Therefore, aqueous Cr(III)/Fe(III) ratio affected homogeneous (in solution) and heterogeneous (on quartz) precipitation rates of (Fex, Cr1-x)(OH)3 through different mechanisms. The sequestration mechanismsmore » of Cr(III) in precipitates were also investigated. In solutions with high aqueous Cr(III)/Fe(III) ratios, surface enrichment of Cr(III) on the precipitates occurred, resulting in slower particle growth in solution. From solutions with 0 – 0.1 mM Cr(III), the particles on quartz grew from 2 to 4 nm within 1 h. Interestingly, from solution with 0.25 mM Cr(III), particles of two distinct sizes (2 and 6 nm) formed on quartz, and their sizes remained unchanged throughout the reaction. Our study provided new insights on homogeneous and heterogeneous precipitation of (Fex, Cr1-x)(OH)3 nanoparticles, which can help determine the fate of Cr in aquatic environments.« less

Control of occupational exposure to hexavalent chromium and ozone in tubular wire arc-welding processes by replacement of potassium by lithium or by addition of zinc.

PubMed

Dennis, John H; French, Michael J; Hewitt, Peter J; Mortazavi, Seyed B; Redding, Christopher A J

2002-01-01

Hexavalent chromium [Cr(VI)] and ozone are produced in many arc-welding processes. Cr(VI) is formed when welding with chromium-containing alloys and is a suspected carcinogen. Ozone is formed by the action of ultraviolet light from the arc on oxygen and can cause severe irritation to the eyes and mucous membranes. Previous work has demonstrated that reduction of sodium and potassium in manual metal arc-welding electrodes leads to substantial reductions in Cr(VI) concentrations in the fume as well as a reduction in the fume formation rate. In this paper replacement of potassium by lithium in a tubular wire welding electrode (self-shielding flux-cored) is shown to give reductions in Cr(VI) concentrations and fume formation rates. Previous work has also demonstrated that use of a tubular wire (metal cored) containing 1% zinc can, under certain conditions, result in a reduction in Cr(VI) formation rate and in ozone concentration near the arc but with a rise in the total fume formation rate. The effects of different shield gases and different levels of zinc are examined. An experimental chromium-containing tubular wire with 1% zinc was used with the following shield gases: argon, Argoshield 5, Argoshield 20, Helishield 101, Ar + 2% CO2, Ar + 5% CO2, Ar + 1% O2 and Ar + 2% O2. The wire gave > 98% reduction in Cr(VI) formation rate compared to the control wire provided the shield gas contained no oxygen. When the shield gas did contain oxygen, 1% zinc enhanced Cr(VI) formation rate, resulting in more than double the rates measured when welding with the control wire. Experiments with zinc concentrations, from 0.018 to 0.9% using Helishield 101, gave results indicating that there is an optimum zinc concentration from the point of view of Cr(VI) reduction. Implications of the use of lithium or zinc on the overall exposure risk are discussed.

The number of 131I therapy courses needed to achieve complete remission is an indicator of prognosis in patients with differentiated thyroid carcinoma.

PubMed

Thies, Elena-Daphne; Tanase, Karina; Maeder, Uwe; Luster, Markus; Buck, Andreas K; Hänscheid, Heribert; Reiners, Christoph; Verburg, Frederik A

2014-12-01

To assess the risk of differentiated thyroid cancer (DTC) recurrence, DTC-related mortality and life expectancy in relation to the number of courses of (131)I therapy (RIT) and cumulative (131)I activities required to achieve complete remission (CR). The study was a database review of 1,229 patients with DTC, 333 without and 896 with CR (negative TSH-stimulated thyroglobulin and negative (131)I diagnostic whole-body scintigraphy) after one or more courses of RIT. The median follow-up was 9.0 years (range 0.1 - 31.8 years) after CR. Recurrence rates at 5 years, 10 years and the end of follow-up were 1.0 ± 0.3%, 4.0 ± 0.7 % and 6.2 ± 1.1 %, and DTC-related mortality was 0.1 ± 0.1%, 0.5 ± 0.3% and 3.4 ± 1.1%, respectively. Recurrence rates also increased with an increasing number of RIT courses required (p = 0.001). DTC-related mortality increased from four RIT courses. In patients with CR after one RIT course, there were no differences in recurrence or DTC-related mortality rates between low-risk and high-risk patients. In patients requiring two RIT courses these rates remain elevated in high-risk patients. Recurrence and DTC-related mortality rates were only significantly elevated in those requiring a cumulative activity over 22.2 GBq (600 mCi) from multiple RIT courses for CR. Regardless of the number of RIT courses or activity needed, life expectancy was not significantly lowered. If more than one RIT course is needed to achieve CR, higher recurrence and DTC-related mortality rates are observed, especially in high-risk patients. Patients requiring >22.2 GBq (131)I for CR should be followed in the same way as patients in whom CR is never reached as long-term mortality rates are similar.

[Identification of hexavalent chromium reducing bacteria Cr4-1 and optimization of its reduction conditions].

PubMed

Zhu, Peilei; Jiao, Shilin; Jiang, Pu; Zeng, Xin; Luo, Qifang; Wang, Lin

2015-03-01

To identify the hexavalent chromium reduction Cr4-1, and to study the better conditions of the bacterial growth and its Cr(VI) reduction. The physiological and biochemical methods and 16s rDNA sequencing were used for identification of bacteria Cr4-1. The influence of temperature, pH, initial Cr (VI) concentration and shaking speed on bacterial growth and Cr (VI) reduction were studied. Mass balance analysis was used to analyze the end products of the reduction reaction. A Cr(VI) reducing bacteria Cr4-1, screened from acclimated activated sludge, was identified as Bacillus cereus. The appropriate conditions of bacterial growth was 25 °C, pH 7 to 8, shaking speed 150 r/min, while the suitable conditions for Cr(VI) reduction was 35 °C, pH 8 to 9. When the initial Cr(VI) concentration increased from 20 mg/L to 60 mg/L, the reduction rate decreased gradually. Under the suitable reducing conditions, when the initial concentration of Cr (VI) was 30 mg/L, the reduction rate could up to 100% in 9 h. The end product was soluble trivalent chromium. Strain Cr4-1 had a good effect on Cr (VI) reduction and the final product was soluble trivalent chromium.

Effects of citrate on hexavalent chromium reduction by structural Fe(II) in nontronite

DOE PAGES

Liu, Xiaolei; Dong, Hailiang; Yang, Xuewei; ...

2017-09-23

Previous studies have shown that organic ligands could influence Cr(VI) reduction by aqueous Fe 2+ and pyrite. In this study, the effects of citrate on Cr(VI) reduction by structural Fe(II) in nontronite (NAu-2) were investigated at pH 6. Our results showed that the presence of citrate decreased the rate but increased the amount of Cr(VI) reduction. The decreased rate was likely due to competitive sorption of citrate and anionic dichromate (Cr 2O 7–) to NAu-2 surface sites, because sorption of dichromate appeared to be the first step for subsequent Cr(VI) reduction. The increased amount of Cr(VI) reduction was likely becausemore » citrate served as an additional electron donor to reduce Cr(VI) through ligand-metal electron transfer in the presence of soluble Fe 3+, which was possibly derived from dissolution of reduced NAu-2. Soluble Cr(III)-citrate complex was a possible form of reduced Cr(VI) when citrate was present. Without citrate, nanometer-sized Cr 2O 3 particles were the product of Cr(VI) reduction. In conclusion, our study highlights the importance of citrate on Cr(VI) reduction and immobilization when iron-rich smectite is applied to treat Cr(VI) contaminant in organic carbon rich environments.« less

Oxidation of Cr(III)-Fe(III) Mixed-phase Hydroxides by Chlorine: Implications on the Control of Hexavalent Chromium in Drinking Water.

PubMed

Chebeir, Michelle; Liu, Haizhou

2018-05-17

The occurrence of chromium (Cr) as an inorganic contaminant in drinking water is widely reported. One source of Cr is its accumulation in iron-containing corrosion scales of drinking water distribution systems as Cr(III)-Fe(III) hydroxide, i.e., FexCr(1-x)(OH)3(s), where x represents the Fe(III) molar content and typically varies between 0.25 and 0.75. This study investigated the kinetics of inadvertent hexavalent chromium Cr(VI) formation via the oxidation of FexCr(1-x)(OH)3(s) by chlorine as a residual disinfectant in drinking water, and examined the impacts of Fe(III) content and drinking water chemical parameters including pH, bromide and bicarbonate on the rate of Cr(VI) formation. Data showed that an increase in Fe(III) molar content resulted in a significant decrease in the stoichiometric Cr(VI) yield and the rate of Cr(VI) formation, mainly due to chlorine decay induced by Fe(III) surface sites. An increase in bicarbonate enhanced the rate of Cr(VI) formation, likely due to the formation of Fe(III)-carbonato surface complexes that slowed down the scavenging reaction with chlorine. The presence of bromide significantly accelerated the oxidation of FexCr(1-x)(OH)3(s) by chlorine, resulting from the catalytic effect of bromide acting as an electron shuttle. A higher solution pH between 6 and 8.5 slowed down the oxidation of Cr(III) by chlorine. These findings suggested that the oxidative conversion of chromium-containing iron corrosion products in drinking water distribution systems can lead to the occurrence of Cr(VI) at the tap, and the abundance of iron, and a careful control of pH, bicarbonate and bromide levels can assist the control of Cr(VI) formation.

Assessing the impact of case sensitivity and term information gain on biomedical concept recognition.

PubMed

Groza, Tudor; Verspoor, Karin

2015-01-01

Concept recognition (CR) is a foundational task in the biomedical domain. It supports the important process of transforming unstructured resources into structured knowledge. To date, several CR approaches have been proposed, most of which focus on a particular set of biomedical ontologies. Their underlying mechanisms vary from shallow natural language processing and dictionary lookup to specialized machine learning modules. However, no prior approach considers the case sensitivity characteristics and the term distribution of the underlying ontology on the CR process. This article proposes a framework that models the CR process as an information retrieval task in which both case sensitivity and the information gain associated with tokens in lexical representations (e.g., term labels, synonyms) are central components of a strategy for generating term variants. The case sensitivity of a given ontology is assessed based on the distribution of so-called case sensitive tokens in its terms, while information gain is modelled using a combination of divergence from randomness and mutual information. An extensive evaluation has been carried out using the CRAFT corpus. Experimental results show that case sensitivity awareness leads to an increase of up to 0.07 F1 against a non-case sensitive baseline on the Protein Ontology and GO Cellular Component. Similarly, the use of information gain leads to an increase of up to 0.06 F1 against a standard baseline in the case of GO Biological Process and Molecular Function and GO Cellular Component. Overall, subject to the underlying token distribution, these methods lead to valid complementary strategies for augmenting term label sets to improve concept recognition.

Micro-electrolysis of Cr (VI) in the nanoscale zero-valent iron loaded activated carbon.

PubMed

Wu, Limei; Liao, Libing; Lv, Guocheng; Qin, Faxiang; He, Yujuan; Wang, Xiaoyu

2013-06-15

In this paper we prepared a novel material of activated carbon/nanoscale zero-valent iron (C-Fe(0)) composite. The C-Fe(0) was proved to possess large specific surface area and outstanding reducibility that result in the rapid and stable reaction with Cr (VI). The prepared composite has been examined in detail in terms of the influence of solution pH, concentration and reaction time in the Cr (VI) removal experiments. The results showed that the C-Fe(0) formed a micro-electrolysis which dominated the reaction rate. The Micro-electrolysis reaches equilibrium is ten minutes. Its reaction rate is ten times higher than that of traditional adsorption reaction, and the removal rate of Cr reaches up to 99.5%. By analyzing the obtained profiles from the cyclic voltammetry, PXRD and XPS, we demonstrate that the Cr (VI) is reduced to insoluble Cr (III) compound in the reaction. Copyright © 2013 Elsevier B.V. All rights reserved.

Differences in uptake and translocation of hexavalent and trivalent chromium by two species of willows.

PubMed

Yu, Xiao-Zhang; Gu, Ji-Dong; Xing, Li-Qun

2008-11-01

Uptake and translocation of chromium (Cr) by two willow species was investigated. Intact pre-rooted weeping willows (Salix babylonica L.) and hankow willows (Salix matsudana Koidz) were grown hydroponically and spiked with hexavalent chromium [Cr (VI)] or trivalent chromium [Cr (III)] at 25.0 +/- 0.5 degrees C for 120 h. Removal of leaves was also performed as a treatment to quantify the effect of transpiration on uptake and translocation of either of the Cr species. Although the two willow species were able to eliminate Cr (VI) and Cr (III) from the hydroponic solution, significant differences in the removal rate for both chemical species were observed between the two willows (p < 0.05): faster removal rate for Cr (III) than Cr (VI) was detected in both willow species; hankow willows showed higher removal potential for both chemical species than weeping willows. Remarkable decreases in the removal rates for both Cr species were detected in the willows with leaves removed (p < 0.05). The results from the treatments spiked with Cr (VI) also revealed that Cr was more mobile in plant materials of hankow willows than that in weeping willows (p < 0.01), while higher translocation efficiency of Cr was observed in weeping willows than hankow willows for the Cr (III) treated (p < 0.01). However, a convincing decrease in the translocation efficiency due to the removal of leaves was only observed in the treatments spiked with Cr (VI) (p < 0.05). Substantial differences existed in the distribution of Cr species in plant materials after exposure of either of the chemical forms: roots and lower stems were the major sites for accumulation in weeping willows exposed to Cr (VI) and Cr (III), respectively; in contrast roots were the only sink in hankow willows exposed to both chemical species. The capacity of willows to assimilate both Cr species was also evaluated using detached leaves and roots of both willow species in sealed glass vessels in vivo. The results indicated that detached roots showed a more remarkable capacity to remove Cr (III) from the hydroponic solution than Cr (VI) (p < 0.01). Although detached leaves of both willow species were able to efficiently eliminate Cr (III), neither of them reduced the concentration of Cr (VI) in the solution. The results suggests that different mechanisms for uptake, assimilation and translocation of Cr (VI) and Cr (III) exist in different willow species and phytoremediation of Cr should consider this factor for the proposed target effectively.

Aging, rejuvenation, and memory effects in short-range Ising spin glass: Cu0.5Co0.5Cl2-FeCl3 graphite bi-intercalation compound

NASA Astrophysics Data System (ADS)

Suzuki, M.; Suzuki, I. S.

2004-10-01

Non-equilibrium aging dynamics in 3D Ising spin glass Cu0.5Co0.5Cl2-FeCl3 GBIC has been studied by zero-field cooled (ZFC) magnetization and low frequency AC magnetic susceptibility ( f = 0.05 Hz), where Tg = 3.92 ± 0.11 K. The time dependence of the relaxation rate S( t) = (1/ H)dM_ZFC/dln t for the ZFC magnetization after the ZFC aging protocol, shows a peak at a characteristic time t cr near a wait time t w (aging behavior), corresponding to a crossover from quasi equilibrium dynamics to non-equilibrium. The time t cr strongly depends on t w , temperature ( T), magnetic field ( H), and the temperature shift (Δ T). The rejuvenation effect is observed in both χ^' and χ^'' under the T-shift and H-shift procedures. The memory of the specific spin configurations imprinted during the ZFC aging protocol can be recalled when the system is re-heated at a constant heating rate. The aging, rejuvenation, and memory effects observed in the present system are discussed in terms of the scaling concepts derived from numerical studies on 3D Edwards-Anderson spin glass model.

Preliminary Modeling of Accident Tolerant Fuel Concepts under Accident Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamble, Kyle A.; Hales, Jason D.

2016-12-01

The catastrophic events that occurred at the Fukushima-Daiichi nuclear power plant in 2011 have led to widespread interest in research of alternative fuels and claddings that are proposed to be accident tolerant. Thus, the United States Department of Energy through its NEAMS (Nuclear Energy Advanced Modeling and Simulation) program has funded an Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The ATF HIP is funded for a three-year period. The purpose of the HIP is to perform research into two potential accident tolerant concepts and provide an in-depth report to the Advanced Fuels Campaign (AFC) describing the behavior of themore » concepts, both of which are being considered for inclusion in a lead test assembly scheduled for placement into a commercial reactor in 2022. The initial focus of the HIP is on uranium silicide fuel and iron-chromium-aluminum (FeCrAl) alloy cladding. Utilizing the expertise of three national laboratory participants (INL, LANL, and ANL) a comprehensive mulitscale approach to modeling is being used including atomistic modeling, molecular dynamics, rate theory, phase-field, and fuel performance simulations. In this paper, we present simulations of two proposed accident tolerant fuel systems: U3Si2 fuel with Zircaloy-4 cladding, and UO2 fuel with FeCrAl cladding. The simulations investigate the fuel performance response of the proposed ATF systems under Loss of Coolant and Station Blackout conditions using the BISON code. Sensitivity analyses are completed using Sandia National Laboratories’ DAKOTA software to determine which input parameters (e.g., fuel specific heat) have the greatest influence on the output metrics of interest (e.g., fuel centerline temperature). Early results indicate that each concept has significant advantages as well as areas of concern. Further work is required prior to formulating the proposition report for the Advanced Fuels Campaign.« less

Microstructure and wear behaviors of laser clad NiCr/Cr3C2-WS2 high temperature self-lubricating wear-resistant composite coating

NASA Astrophysics Data System (ADS)

Yang, Mao-Sheng; Liu, Xiu-Bo; Fan, Ji-Wei; He, Xiang-Ming; Shi, Shi-Hong; Fu, Ge-Yan; Wang, Ming-Di; Chen, Shu-Fa

2012-02-01

The high temperature self-lubricating wear-resistant NiCr/Cr3C2-30%WS2 coating and wear-resistant NiCr/Cr3C2 coating were fabricated on 0Cr18Ni9 austenitic stainless steel by laser cladding. Phase constitutions and microstructures were investigated, and the tribological properties were evaluated using a ball-on-disc wear tester under dry sliding condition at room-temperature (17 °C), 300 °C and 600 °C, respectively. Results indicated that the laser clad NiCr/Cr3C2 coating consisted of Cr7C3 primary phase and γ-(Fe,Ni)/Cr7C3 eutectic colony, while the coating added with WS2 was mainly composed of Cr7C3 and (Cr,W)C carbides, with the lubricating WS2 and CrS sulfides as the minor phases. The wear tests showed that the friction coefficients of two coatings both decrease with the increasing temperature, while the both wear rates increase. The friction coefficient of laser clad NiCr/Cr3C2-30%WS2 is lower than the coating without WS2 whatever at room-temperature, 300 °C, 600 °C, but its wear rate is only lower at 300 °C. It is considered that the laser clad NiCr/Cr3C2-30%WS2 composite coating has good combination of anti-wear and friction-reducing capabilities at room-temperature up to 300 °C.

The Road to Resilience: Insights on Training Community Coalitions in the Los Angeles County Community Disaster Resilience Project.

PubMed

Cha, Biblia S; Lawrence, Rachel I; Bliss, Jesse C; Wells, Kenneth B; Chandra, Anita; Eisenman, David P

2016-12-01

Local health departments (LHDs) have little guidance for operationalizing community resilience (CR). We explored how community coalitions responded to 4 CR levers (education, engagement, partnerships, and community self-sufficiency) during the first planning year of the Los Angeles County Community Disaster Resilience (LACCDR) Project. Sixteen communities were selected and randomly assigned to the experimental CR group or the control preparedness group. Eight CR coalitions met monthly to plan CR-building activities or to receive CR training from a public health nurse. Trained observers documented the coalitions' understanding and application of CR at each meeting. Qualitative content analysis was used to analyze structured observation reports around the 4 levers. Analysis of 41 reports suggested that coalitions underwent a process of learning about and applying CR concepts in the planning year. Groups resonated with ideas of education, community self-sufficiency, and engagement, but increasing partnerships was challenging. LHDs can support coalitions by anticipating the time necessary to understand CR and by facilitating engagement. Understanding the issues that emerge in the early phases of planning and implementing CR-building activities is critical. LHDs can use the experience of the LACCDR Project's planning year as a guide to navigate challenges and issues that emerge as they operationalize the CR model. (Disaster Med Public Health Preparedness. 2016;10:812-821).

Ocean-Scale Patterns in Community Respiration Rates along Continuous Transects across the Pacific Ocean

PubMed Central

Wilson, Jesse M.; Severson, Rodney; Beman, J. Michael

2014-01-01

Community respiration (CR) of organic material to carbon dioxide plays a fundamental role in ecosystems and ocean biogeochemical cycles, as it dictates the amount of production available to higher trophic levels and for export to the deep ocean. Yet how CR varies across large oceanographic gradients is not well-known: CR is measured infrequently and cannot be easily sensed from space. We used continuous oxygen measurements collected by autonomous gliders to quantify surface CR rates across the Pacific Ocean. CR rates were calculated from changes in apparent oxygen utilization and six different estimates of oxygen flux based on wind speed. CR showed substantial spatial variation: rates were lowest in ocean gyres (mean of 6.93 mmol m−3 d−1±8.0 mmol m−3 d−1 standard deviation in the North Pacific Subtropical Gyre) and were more rapid and more variable near the equator (8.69 mmol m−3 d−1±7.32 mmol m−3 d−1 between 10°N and 10°S) and near shore (e.g., 5.62 mmol m−3 d−1±45.6 mmol m−3 d−1 between the coast of California and 124°W, and 17.0 mmol m−3 d−1±13.9 mmol m−3 d−1 between 156°E and the Australian coast). We examined how CR varied with coincident measurements of temperature, turbidity, and chlorophyll concentrations (a proxy for phytoplankton biomass), and found that CR was weakly related to different explanatory variables across the Pacific, but more strongly related to particular variables in different biogeographical areas. Our results indicate that CR is not a simple linear function of chlorophyll or temperature, and that at the scale of the Pacific, the coupling between primary production, ocean warming, and CR is complex and variable. We suggest that this stems from substantial spatial variation in CR captured by high-resolution autonomous measurements. PMID:25048960

Ocean-scale patterns in community respiration rates along continuous transects across the Pacific Ocean.

PubMed

Wilson, Jesse M; Severson, Rodney; Beman, J Michael

2014-01-01

Community respiration (CR) of organic material to carbon dioxide plays a fundamental role in ecosystems and ocean biogeochemical cycles, as it dictates the amount of production available to higher trophic levels and for export to the deep ocean. Yet how CR varies across large oceanographic gradients is not well-known: CR is measured infrequently and cannot be easily sensed from space. We used continuous oxygen measurements collected by autonomous gliders to quantify surface CR rates across the Pacific Ocean. CR rates were calculated from changes in apparent oxygen utilization and six different estimates of oxygen flux based on wind speed. CR showed substantial spatial variation: rates were lowest in ocean gyres (mean of 6.93 mmol m(-3) d(-1)±8.0 mmol m(-3) d(-1) standard deviation in the North Pacific Subtropical Gyre) and were more rapid and more variable near the equator (8.69 mmol m(-3) d(-1)±7.32 mmol m(-3) d(-1) between 10°N and 10°S) and near shore (e.g., 5.62 mmol m(-3) d(-1)±45.6 mmol m(-3) d(-1) between the coast of California and 124°W, and 17.0 mmol m(-3) d(-1)±13.9 mmol m(-3) d(-1) between 156°E and the Australian coast). We examined how CR varied with coincident measurements of temperature, turbidity, and chlorophyll concentrations (a proxy for phytoplankton biomass), and found that CR was weakly related to different explanatory variables across the Pacific, but more strongly related to particular variables in different biogeographical areas. Our results indicate that CR is not a simple linear function of chlorophyll or temperature, and that at the scale of the Pacific, the coupling between primary production, ocean warming, and CR is complex and variable. We suggest that this stems from substantial spatial variation in CR captured by high-resolution autonomous measurements.

Creatinine Clearance and Estimated Glomerular Filtration Rate--When are they Interchangeable.

PubMed

Simetić, Lucija; Zibar, Lada; Drmić, Sandra; Begić, Ivana; Serić, Vatroslav

2015-09-01

Study goal was to examine which of glomerular rate equations is most suitable for prediction of creatinine clearance (CrCl). Using a retrospective review of data from 500 hospital patients we calculated glomerular filtration rate according to Cockcroft-Gault equation (C-G), Modification of Diet in Renal Disease Study equation (MDRD) and Chronic Kidney Disease Epidemiology Collaboration equation (CKD-EPI). We determined if results of these equations were compatible with CrCl, and does stage of kidney disease, body-mass index (BMI), diabetes or old age have an impact on their ability to predict creatinine clearance. All of the equations showed high correlations with CrCl, regardless of diabetes, overweight or old age. There was no significant difference (p<0.05) between diagnostic accuracy when comparing ROC plots for MDRD and CKD-EPIat CrCl cut offs of 60 ml/min/1.73 m2 and 90 ml/min/1.73 m2 when analyzing data for all patients, older patients (>65 years) and diabetics. The percentage of overweight patients (BMI > or = 25) in patients with normal CrCl and decreased GFR was 64.81% for C-G, 92.04% for MDRD and 91.36% for CKD-EPI. Large number of overweight patients with normal CrCl and decreased GFR would indicate that CrCl overestimates GFR in overweight patients. The simple correction in CrCl for obese subjects is purposed. Passing-Bablok regression showed agreement between CrCl and MDRD and CrCl and CKD-EPI only in cases of severely decreased GFR (G4 and G5 stage of chronic kidney disease). Only in these stages of chronic kidney disease can CrCl and MDRD or CrCl and CKD-EPI be used simultaneously.

Effects of argon gas flow rate on laser-welding.

PubMed

Takayama, Yasuko; Nomoto, Rie; Nakajima, Hiroyuki; Ohkubo, Chikahiro

2012-01-01

The purpose of this study was to evaluate the effects of the rate of argon gas flow on joint strength in the laser-welding of cast metal plates and to measure the porosity. Two cast plates (Ti and Co-Cr alloy) of the same metal were abutted and welded together. The rates of argon gas flow were 0, 5 and 10 L/min for the Co-Cr alloy, and 5 and 10 L/min for the Ti. There was a significant difference in the ratio of porosity according to the rate of argon gas flow in the welded area. Argon shielding had no significant effect on the tensile strength of Co-Cr alloy. The 5 L/min specimens showed greater tensile strength than the 10 L/min specimens for Ti. Laser welding of the Co-Cr alloy was influenced very little by argon shielding. When the rate of argon gas flow was high, joint strength decreased for Ti.

Improved Atmospheric Sampling of Hexavalent Chromium

PubMed Central

Torkmahalleh, Mehdi Amouei; Yu, Chang-Ho; Lin, Lin; Fan, Zhihua (Tina); Swift, Julie L.; Bonanno, Linda; Rasmussen, Don H.; Holsen, Thomas M.; Hopke, Philip K.

2015-01-01

Hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) are the primary chromium oxidation states found in ambient atmospheric particulate matter. While Cr(III) is relatively nontoxic, Cr(VI) is toxic and exposure to Cr(VI) may lead to cancer, nasal damage, asthma, bronchitis, and pneumonitis. Accurate measurement of the ambient Cr(VI) concentrations is an environmental challenge since Cr(VI) can be reduced to Cr(III) and vice versa during sampling. In the present study, a new Cr(VI) sampler (Clarkson sampler) was designed, constructed, and field tested to improve the sampling of Cr(VI) in ambient air. The new Clarkson Cr(VI) sampler was based on the concept that deliquescence during sampling leads to aqueous phase reactions. Thus, the relative humidity of the sampled air was reduced below the deliquescence relative humidity (DRH) of the ambient particles. The new sampler was operated to collect Total Suspended Particles (TSP), and compared side-by-side with the current National Air Toxics Trends Stations (NATTS) Cr(VI) sampler that is utilized in the United States Environmental Protection Agency (USEPA) air toxics monitoring program. Side-by-side field testing of the samplers occurred in Elizabeth, NJ during the winter and summer of 2012. The average recovery values of Cr(VI) spikes after 24 hour sampling intervals during summer and winter sampling were 57 and 72%, respectively, for the Clarkson sampler, while the corresponding average values for NATTS samplers were 46% for both summer and winter sampling, respectively. Preventing the ambient aerosol collected on the filters from deliquescing is a key to improving the sampling of Cr(VI). PMID:24344574

Enhancing Cardiac Rehabilitation With Stress Management Training: A Randomized Clinical Efficacy Trial

PubMed Central

Blumenthal, James A.; Sherwood, Andrew; Smith, Patrick J.; Watkins, Lana; Mabe, Stephanie; Kraus, William E.; Ingle, Krista; Miller, Paula; Hinderliter, Alan

2016-01-01

Background Cardiac rehabilitation (CR) is the standard of care for patients with coronary heart disease (CHD). Despite considerable epidemiologic evidence that high stress is associated with worse health outcomes, stress management training (SMT) is not included routinely as a component of CR. Methods and Results 151 outpatients with CHD aged 36 to 84 years were randomized to 12-weeks of comprehensive CR or comprehensive CR combined with SMT (CR+SMT), with assessments of stress and CHD biomarkers obtained before and after treatment. A matched sample of CR-eligible patients who did not receive CR comprised a No-CR comparison group. All participants were followed for up to 5.3 years (median = 3.2 years) for clinical events. Patients randomized to CR+SMT exhibited greater reductions in composite stress levels compared with those randomized to CR alone (P = 0.022), an effect that was driven primarily by improvements in anxiety, distress, and perceived stress. Both CR groups achieved significant, and comparable, improvements in CHD biomarkers. Participants in the CR+SMT group exhibited lower rates of clinical events compared with CR alone (18% vs. 33%, HR = 0.49 [0.25, 0.95], P = 0.035) and both CR groups had lower event rates compared to the No-CR group (47%, HR = 0.44 [0.27, 0.71], P < .001). Conclusions CR enhanced by SMT produced significant reductions in stress and greater improvements in medical outcomes compared with standard CR. Our findings indicate that SMT may provide incremental benefit when combined with comprehensive CR and suggest that SMT should be incorporated routinely into CR. Clinical Trial Registration Information www.Clinicaltrials.gov. Identifier: NCT00981253. PMID:27045127

Impact of Race, Ethnicity and BMI on Achievement of Pathologic Complete Response Following Neoadjuvant Chemotherapy for Breast Cancer: A Pooled Analysis of Four Prospective Alliance Clinical Trials (A151426)

PubMed Central

Warner, Erica T.; Ballman, Karla V.; Strand, Carrie; Boughey, Judy; Buzdar, Aman U.; Carey, Lisa A.; Sikov, William M.; Partridge, H.

2016-01-01

Purpose Previous studies demonstrated poor response to neoadjuvant systemic therapy (NST) for breast cancer among black women and women who are overweight or obese but this may be due to chemotherapy under dosing. We assessed associations of race, ethnicity and body mass index (BMI) with pathologic complete response (pCR) in clinical trial populations. Methods 1797 women enrolled in four NST trials (CALGB 40601, 40603; ACOSOG Z1041, Z1071) were included. Tumor subtypes were defined by estrogen receptor (ER) and HER2 status. Logistic regression generated odds ratios (OR) and 95% confidence intervals (CI) for the associations of race, ethnicity, and BMI with pCR adjusting for subtype, study arm, lymph node status, tumor size, and tumor grade. Results 253 (14.1%) were black, 199 (11.1%) Hispanic, 520 (28.9%) overweight, and 743 (41.4%) obese. Compared to whites, Blacks and Hispanics were more likely to be obese and Blacks were more likely to have triple-negative cancer. pCR rates differed significantly by tumor subtype. In multivariate analyses, neither race (black vs. white: OR: 1.18, 95% CI: 0.85–1.62) nor ethnicity (Hispanic vs. non-Hispanic: OR: 1.30, 95% CI: 0.67–2.53) were significant predictors of pCR overall or by subtype. Overweight and obese women had lower pCR rates in ER+/HER2+, but higher pCR rates in ER−/HER2+ cancers. Conclusions There was no difference in breast pCR according to race or ethnicity. Overall, there was no major difference in pCR rates by BMI. These findings suggest that pCR with optimally dosed NST is a function of tumor, rather than patient, biology. PMID:27449492

Impact of race, ethnicity, and BMI on achievement of pathologic complete response following neoadjuvant chemotherapy for breast cancer: a pooled analysis of four prospective Alliance clinical trials (A151426).

PubMed

Warner, Erica T; Ballman, Karla V; Strand, Carrie; Boughey, Judy C; Buzdar, Aman U; Carey, Lisa A; Sikov, William M; Partridge, Ann H

2016-08-01

Previous studies demonstrated poor response to neoadjuvant systemic therapy (NST) for breast cancer among black women and women who are overweight or obese, but this may be due to chemotherapy underdosing. We assessed associations of race, ethnicity, and body mass index (BMI) with pathologic complete response (pCR) in clinical trial populations. 1797 women enrolled in four NST trials (CALGB 40601, 40603; ACOSOG Z1041, Z1071) were included. Tumor subtypes were defined by estrogen receptor (ER) and HER2 status. Logistic regression generated odds ratios (OR) and 95 % confidence intervals (CI) for the associations of race, ethnicity, and BMI with in-breast pCR adjusting for subtype, study arm, lymph node status, tumor size, and tumor grade. 253 (14.1 %) were black, 199 (11.1 %) Hispanic, 520 (28.9 %) overweight, and 743 (41.4 %) obese. Compared to whites, Blacks and Hispanics were more likely to be obese and Blacks were more likely to have triple-negative cancer. pCR rates differed significantly by tumor subtype. In multivariate analyses, neither race (black vs white: OR 1.18, 95 % CI 0.85-1.62) nor ethnicity (Hispanic vs non-Hispanic; OR 1.30, 95 % CI 0.67-2.53) were significant predictors of pCR overall or by subtype. Overweight and obese women had lower pCR rates in ER+/HER2+, but higher pCR rates in ER-/HER2+ cancers. There was no difference in pCR according to race or ethnicity. Overall, there was no major difference in pCR rates by BMI. These findings suggest that pCR with optimally dosed NST is a function of tumor, rather than patient, biology.

Assessing the pollution risk of soil Chromium based on loading capacity of paddy soil at a regional scale

PubMed Central

Qu, Mingkai; Li, Weidong; Zhang, Chuanrong; Huang, Biao; Zhao, Yongcun

2015-01-01

The accumulation of a trace metal in rice grain is not only affected by the total concentration of the soil trace metal, but also by crop variety and related soil properties, such as soil pH, soil organic matter (SOM) and so on. However, these factors were seldom considered in previous studies on mapping the pollution risk of trace metals in paddy soil at a regional scale. In this study, the spatial nonstationary relationships between rice-Cr and a set of perceived soil properties (soil-Cr, soil pH and SOM) were explored using geographically weighted regression; and the relationships were then used for calculating the critical threshold (CT) of soil-Cr concentration that may ensure the concentration of rice-Cr being below the permissible limit. The concept of “loading capacity” (LC) for Cr in paddy soil was then defined as the difference between the CT and the real concentration of Cr in paddy soil, so as to map the pollution risk of soil-Cr to rice grain and assess the risk areas in Jiaxing city, China. Compared with the information of the concentration of the total soil-Cr, such results are more valuable for spatial decision making in reducing the accumulation of rice-Cr at a regional scale. PMID:26675587

Assessing the pollution risk of soil Chromium based on loading capacity of paddy soil at a regional scale.

PubMed

Qu, Mingkai; Li, Weidong; Zhang, Chuanrong; Huang, Biao; Zhao, Yongcun

2015-12-17

The accumulation of a trace metal in rice grain is not only affected by the total concentration of the soil trace metal, but also by crop variety and related soil properties, such as soil pH, soil organic matter (SOM) and so on. However, these factors were seldom considered in previous studies on mapping the pollution risk of trace metals in paddy soil at a regional scale. In this study, the spatial nonstationary relationships between rice-Cr and a set of perceived soil properties (soil-Cr, soil pH and SOM) were explored using geographically weighted regression; and the relationships were then used for calculating the critical threshold (CT) of soil-Cr concentration that may ensure the concentration of rice-Cr being below the permissible limit. The concept of "loading capacity" (LC) for Cr in paddy soil was then defined as the difference between the CT and the real concentration of Cr in paddy soil, so as to map the pollution risk of soil-Cr to rice grain and assess the risk areas in Jiaxing city, China. Compared with the information of the concentration of the total soil-Cr, such results are more valuable for spatial decision making in reducing the accumulation of rice-Cr at a regional scale.

Investigation of vacuum properties of CuCrZr alloy for high-heat-load absorber

NASA Astrophysics Data System (ADS)

Shueh, C.; Chan, C. K.; Chang, C. C.; Sheng, I. C.

2017-01-01

The Taiwan Photon Source (TPS) uses high-heat-load (HHL) absorbers to protect downstream ultrahigh-vacuum chambers from overheating. In this work, we propose to use the CuCrZr alloy (ASTM C18150) for the HHL absorber body and the ConFlat® flanges. We use the throughput method to measure the thermal outgassing rate and a helium leak detector to verify the vacuum seal between the CuCrZr alloy and stainless-steel flanges. The measured outgassing rate of the CuCrZr alloy was 5.8×10-10 Pa m/s after 72 h of pumping and decreased to 2.0 × 10-10 Pa m/s after 100 h of pumping. The leak rate through the vacuum seal between a CuCrZr flange and a stainless-steel flange was less than 1 × 10-10 Pa m3/s even after mounting and unmounting the flanges ten times and baking them at 250 °C. These results indicate that CuCrZr alloy is suitable for integrating HHL components with ConFlat® CuCrZr flanges for the absorption of the synchrotron radiation generated by the TPS.

Prediction of Neck Dissection Requirement After Definitive Radiotherapy for Head-and-Neck Squamous Cell Carcinoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thariat, Juliette; Department of Radiation Oncology/IBDC CNRS UMR, Cancer Center Antoine-Lacassagne, University Nice Sophia-Antipolis, Nice, Cedex 2; Ang, K. Kian

2012-03-01

Background: This analysis was undertaken to assess the need for planned neck dissection in patients with a complete response (CR) of involved nodes after irradiation and to determine the benefit of a neck dissection in those with less than CR by tumor site. Methods: Our cohort included 880 patients with T1-4, N1-3M0 squamous cell carcinoma of the oropharynx, larynx, or hypopharynx who received treatment between 1994 and 2004. Survival curves were calculated by the Kaplan-Meier Method, comparisons of rates with the log-rank test and prognostic factors by Cox's proportional hazard model. Results: Nodal CR occurred in 377 (43%) patients, ofmore » whom 365 patients did not undergo nodal dissection. The 5-year actuarial regional control rate of patients with CR was 92%. Two hundred sixty-eight of the remaining patients (53%) underwent neck dissections. The 5-year actuarial regional control rate for patients without a CR was 84%. Those who had a neck dissection fared better with 5-year actuarial regional control rates of 90% and 76% for those operated and those not operated (p < 0.001). Variables associated with poorer regional control rates included higher T and N stage, non-oropharynx cancers, non-CR, both clinical and pathological. Conclusions: With 92% 5-year neck control rate without neck dissection after CR, there is little justification for systematic neck dissection. The addition of a neck dissection resulted in higher neck control after partial response though patients with viable tumor on pathology specimens had poorer outcomes. The identification of that subgroup that benefits from additional treatment remains a challenge.« less

Creep Testing of High-Temperature Cu-8 Cr-4 Nb Alloy Completed

NASA Technical Reports Server (NTRS)

1995-01-01

A Cu-8 at.% Cr-4 at.% Nb (Cu-8 Cr-4 Nb) alloy is under development for high-temperature, high heatflux applications, such as actively cooled, hypersonic vehicle heat exchangers and rocket engine combustion chambers. Cu-8 Cr-4 Nb offers a superior combination of strength and conductivity. It has also shown exceptional low-cycle fatigue properties. Following preliminary testing to determine the best processing route, a more detailed testing program was initiated to determine the creep lives and creep rates of Cu-8 Cr-4 Nb alloy specimens produced by extrusion. Testing was conducted at the NASA Lewis Research Center with constant-load vacuum creep units. Considering expected operating temperatures and mission lives, we developed a test matrix to accurately determine the creep properties of Cu-8 Cr-4 Nb between 500 and 800 C. Six bars of Cu-8 Cr-4 Nb were extruded. From these bars, 54 creep samples were machined and tested. The figure on the left shows the steady-state, or second-stage, creep rates for the samples. Comparison data for NARloy-Z (Cu-3 wt % Ag-0.5 wt % Zr), the alloy currently used in combustion chamber liners, were not unavailable. Therefore the steady-state creep rates for Cu at similar temperatures are presented. As expected, in comparison to pure Cu, the creep rates for Cu-8 Cr-4 Nb are much lower. The lives of the samples are presented in the figure on the right. As shown, Cu-8 Cr-4 Nb at 800 C is comparable to NARloy-Z at 648 C. At equivalent temperatures, Cu-8 Cr-4 Nb enjoys a 20 to 50 percent advantage in stress for a given life and 1 to 3 orders of magnitude greater life at a given stress. The improved properties allow for design tradeoffs and improvements in new and existing heat exchangers such as the next generation of combustion chamber liners. Average creep rates for Cu-8 Cr-4 Nb and pure Cu are shown. Average creep lives for Cu-8 Cr- 4 Nb and NARloy-Z are also shown. Currently, two companies are interested in the commercial usage of the Cu-8 Cr-4 Nb alloy. The Rocketdyne Division of Rockwell International is conducting independent testing to analyze the properties for their projected needs in advanced rocket engine applications. Metallamics, a company based in Traverse City, Michigan, is entering into a Space Act Agreement to evaluate and test Cu-Cr-Nb alloys as materials for welding electrodes that are used in robotic welding operations. Creep rate is one of the alloy properties that determines the degree to which a welding electrode will mushroom or expand at the tip. A material with a low creep rate will resist mushrooming and give the electrode a longer life, minimizing downtime. This application holds the potential for large-scale usage of the alloy in the automotive and other industries. Success here would dramatically decrease the cost of the alloy and increase availability for aerospace applications.

Effect of temperature on phytoextraction of hexavalent and trivalent chromium by hybrid willows.

PubMed

Yu, Xiao-Zhang; Peng, Xiao-Ying; Xing, Li-Qun

2010-01-01

The removal of hexavalent and trivalent chromium from hydroponic solution by plants to changes in temperature was investigated. Pre-rooted hybrid willows (Salix matsudana Koidz x alba L.) were exposed to a nutrient solution spiked with potassium chromate (K(2)CrO(4)) or chromium chloride (CrCl(3)) for 4 days. Ten different temperatures were tested ranging from 11 to 32 degrees C. Total Cr in solutions and in plant materials were all analyzed quantitatively. The results revealed that large amounts of the applied Cr were removed from the hydroponic solution in the presence of the plants. Significantly faster removal of Cr(III) than Cr(VI) was achieved by hybrid willows from the hydroponic solutions at all temperatures (P < 0.01). The removal rates of both chemical forms of Cr by plants increased linearly with the increase of temperatures. The highest removal rate of Cr(VI) was found at 32 degrees C with a value of 1.99 microg Cr/g day, whereas the highest value of Cr(III) was 3.55 microg Cr/g day at the same temperature. Roots were the main sink for Cr accumulation in plants at all temperatures. Translocation of both chemical forms of Cr from roots to lower stems was only found at temperatures > or = 24 degrees C. The temperature coefficient values (Q(10)) were 2.41 and 1.42 for Cr(VI) and Cr(III), respectively, indicating that the removal of Cr(VI) by hybrid willows was much more susceptible to changes in temperature than that of Cr(III). This information suggests that changes in temperature have a substantial influence on the uptake and accumulation of both chemical forms of Cr by plants.

The effect of O2 content on the corrosion behaviour of X65 and 5Cr in water-containing supercritical CO2 environments

NASA Astrophysics Data System (ADS)

Hua, Yong; Barker, Richard; Neville, Anne

2015-11-01

The general and localized corrosion behaviour of X65 carbon steel and 5Cr low alloy steel were evaluated in a water-saturated supercritical CO2 environment in the presence of varying concentrations of O2. Experiments were performed at a temperature of 35 °C and a pressure of 80 bar to simulate the conditions encountered during CO2 transport and injection. Results indicated that increasing O2 concentration from 0 to 1000 ppm caused a progressive reduction in the general corrosion rate, but served to increase the extent of localized corrosion observed on both materials. Pitting (or localized attack) rates for X65 ranged between 0.9 and 1.7 mm/year, while for 5Cr rose from 0.3 to 1.4 mm/year as O2 concentration was increased from 0 to 1000 ppm. General corrosion rates were over an order of magnitude lower than the pitting rates measured. Increasing O2 content in the presence of X65 and 5Cr suppressed the growth of iron carbonate (FeCO3) on the steel surface and resulted in the formation of a corrosion product consisting mainly of iron oxide (Fe2O3). 5Cr was shown to offer more resistance to pitting corrosion in comparison to X65 steel over the conditions tested. At concentrations of O2 above 500 ppm 5Cr produced general corrosion rates less than 0.04 mm/year, which were half that recorded for X65. The improved corrosion resistance of 5Cr was believed to be at least partially attributed to the formation of a Cr-rich film on the steel surface which was shown using X-ray photoelectron spectroscopy to contain chromium oxide (Cr2O3) and chromium hydroxide (Cr(OH)3). A final series of tests conducted with the addition of 1000 ppm O2 in under-saturated conditions (water content below solubility limit) revealed that no corrosion was observed when the water content was below 1200 ppm for both materials.

[Comparative analysis of 6 kinds of bacteria in the subgingival plaque in different types of patients with periodontal diseases].

PubMed

Ma, Ying-ying; Zhang, Tao-wen; Jiang, Yu-xi; Liu, Shu-tai

2015-10-01

To detect the existence of Aa,Pg,Tf,Cr,Ec and Pn in the subgingival plaque, and determine their relationships among different types of periodontal diseases. Dental plaques from 120 subjects were sampled, including 40 volunteers with health periodontal status(Group A) , forty patients with dental plaque-induced gingival diseases(Group B) and 40 patients with moderate or severe chronic periodontitis (Group C) . These samples were detected based on bacterial composition using the terminal restriction fragment length polymorphism of 16S rRNA genes by multiple-polymerase chain reaction. The data was analysed with SPSS 13.0 software package for Chi-square test. The detection rate of Pn, Cr and Pg had significant differences between group A and B. The detection rate of Ec, Cr, Pg, Aa and Tf had significant differences between group C and B. The detection rate of Ec, Pn, Cr, Pg, Aa and Tf had significant differences between group A and C. The rate of Ec, Pn, Cr, Pg and Tf detected in moderate or patients with moderate or severe chronic periodontitis are significantly higher than that in healthy subjects, indicating that these bacteria have certain correlation with chronic periodontitis. The rate of Ec, Cr, Pg and Tf detected in severe chronic periodontitis are significantly higher than that in dental-induced gingivitis, suggesting their close relationship with the progress of periodontal disease.

Reduction of hexavalent chromium in water samples acidified for preservation

USGS Publications Warehouse

Stollenwerk, K.G.; Grove, D.B.

1985-01-01

Reduction of hexavalent chromium, Cr(VI), in water samples, preserved by standard techniques, was investigated. The standard preservation technique for water samples that are to be analyzed for Cr(VI) consists of filtration through a 0.45-??m membrane, acidification to a pH < 2, and storage in plastic bottles. Batch experiments were conducted to evaluate the effect of H+ concentration, NO2, temperature, and dissolved organic carbon (DOC) on the reduction of Cr(VI) to Cr(III). The rate of reduction of Cr(VI) to Cr(III) increased with increasing NO2, DOC, H+, and temperature. Reduction of Cr(VI) by organic matter occurred in some samples even though the samples were unacidified. Reduction of Cr(VI) is inhibited to an extent by storing the sample at 4??C. Stability of Cr(VI) in water is variable and depends on the other constituents present in the sample. Water samples collected for the determination of Cr(VI) should be filtered (0.45-??m membrane), refrigerated, and analyzed as quickly as possible. Water samples should not be acidified. Measurement of total Cr in addition to Cr(VI) can serve as a check for Cr(VI) reduction. If total Cr is greater than Cr(VI), the possibility that Cr(VI) reduction has occurred needs to be considered.The rate of reduction of Cr(VI) to Cr(III) increased with increasing NO//2, DOC, H** plus , and temperature. Reduction of Cr(VI) by organic matter occurred in some samples even though the samples were unacidified. Reduction of Cr(VI) is inhibited to an extent by storing the sample at 4 degree C. Stability of Cr(VI) in water is variable and depends on the other constituents present in the sample. Water samples collected for the determination of Cr(VI) should be filtered (0. 45- mu m membrane), refrigerated, and analyzed as quickly as possible. Water samples should not be acidified. Measurement of total Cr in addition to Cr(VI) can serve as a check for Cr(VI) reduction. If total Cr is greater than Cr(VI), the possibility that Cr(VI) reduction has occurred needs to be considered.

Hydrogen ions and organic acids secreted by ectomycorrhizal fungi, Pisolithus sp1, are involved in the efficient removal of hexavalent chromium from waste water.

PubMed

Shi, Liang; Xue, Jiawang; Liu, Binhao; Dong, Pengcheng; Wen, Zhugui; Shen, Zhenguo; Chen, Yahua

2018-06-13

Pisolithus sp1 is an ectomycorrhizal (ECM) fungi that was chosen during a screening test of six strains of ECM fungi due to its ability to tolerate and remove hexavalent chromium (Cr(VI)). The physiological responses of Pisolithus sp1 to Cr(VI) exposure, the relationship between Pisolithus sp1 and exogenously added organic acids (EAOAs) or Na 3 VO 4 (H + -ATPase inhibitor) and the ability of Pisolithus sp1 to reduce Cr(VI) in liquid culture were also investigated. Hydrogen ions (H + ), which were produced directly by Pisolithus sp1, reduced the pH of the medium and played an important role in Cr(VI) reduction; however, Na 3 VO 4 significantly inhibited this process and resulted in a decrease in the Cr(VI) reduction rates. Organic acids were secreted after the reduction in Cr(VI) by Pisolithus sp1, and EAOAs did not significantly affect Cr(VI) reduction; those results revealed the secondary role of organic acids in Cr(VI) reduction. The Cr(VI) removal rate of Pisolithus sp1 approached 99% after Cr(VI) treatment for 12 days. Overall, 75% of the Cr(VI) removal was due to extracellular reduction and 24% was due to adsorption. The results of this study provide a strong basis for using Cr(VI)-tolerant and Cr(VI)-reducing fungi, as well as ectomycorrhiza, in the remediation of Cr(VI)-contaminated sites. Copyright © 2018 Elsevier Inc. All rights reserved.

Regulation of Dynamic Behavior of Retinal Microglia by CX3CR1 Signaling

PubMed Central

Liang, Katharine J.; Lee, Jung Eun; Wang, Yunqing D.; Ma, Wenxin; Fontainhas, Aurora M.; Fariss, Robert N.; Wong, Wai T.

2009-01-01

PURPOSE Microglia in the central nervous system display a marked structural dynamism in their processes in the resting state. This dynamic behavior, which may play a constitutive surveying role in the uninjured neural parenchyma, is also highly responsive to tissue injury. The role of CX3CR1, a chemokine receptor expressed in microglia, in regulating microglia morphology and dynamic behavior in the resting state and after laser-induced focal injury was examined. METHODS Time-lapse confocal imaging of retinal explants was used to evaluate the dynamic behavior of retinal microglia labeled with green fluorescent protein (GFP). Transgenic mice in which CX3CR1 signaling was ablated (CX3CR1GFP/GFP/CX3CR1−/−) and preserved (CX3CR1+/GFP/CX3CR1+/−) were used. RESULTS Retinal microglial density, distribution, cellular morphology, and overall retinal tissue anatomy were not altered in young CX3CR1−/− animals. In the absence of CX3CR1, retinal microglia continued to exhibit dynamic motility in their processes. However, rates of process movement were significantly decreased, both under resting conditions and in response to tissue injury. In addition, microglia migration occurring in response to focal laser injury was also significantly slowed in microglia lacking CX3CR1. CONCLUSIONS CX3CR1 signaling in retinal microglia, though not absolutely required for the presence of microglial dynamism, plays a role in potentiating the rate of retinal microglial process dynamism and cellular migration. CX3CL1 signaling from retinal neurons and endothelial cells likely modulates dynamic microglia behavior so as to influence the level of microglial surveillance under basal conditions and the rate of dynamic behavior in response to tissue injury. PMID:19443728

FATE OF CHROMIUM (III) IN CHLORINATED WATER

EPA Science Inventory

The oxidation of trivalent chromium, Cr(III), to the more toxic Cr(VI) in chlorinated water is thermodynamically feasible and was the subject of the study. The study found that free available chlorine (FAC) readily converts Cr(III) to Cr(VI) at a rate that is highly dependent upo...

Hexavalent chrome: threshold concept for carcinogenicity.

PubMed

Jones, R E

1990-03-01

Certain hexavalent chromium (Cr6+) compounds when administered via inhalation at high doses have the potential to induce lung tumors in humans and experimental animals. Trivalent chromium (Cr3+) is an essential human and animal nutrient at levels of 50 to 200 micrograms/day. Recent data have shown that the human body is able to reduce Cr6+ to Cr3+. This reduction occurs in bodily fluids such as gastric juice, epithelial lining fluid of the respiratory tract, blood, and other fluids. Secondary reduction occurs at the cellular level by the cytosol, mitochondria, and microsomes. Thus, at low levels of exposure hexavalent chromium ions are reduced before the 6+ ions can interact with DNA unless the dose is sufficient to overwhelm the body's reduction capacity. This paper summarizes the available data concerning the reducing ability of the body and formulates the steps in the mechanism of cancer induction. These steps include: (1) only certain Cr6+ compounds have the capacity to interact with cellular components; (2) Cr6+ is reduced by body fluids and excess Cr6+ enters the cell (Cr3+ is poorly absorbed across membranes); (3) cellular organelles and the cytoplasm reduce Cr6+ to Cr3+; (4) excess Cr6+ can enter the nucleus; (5) Cr6+ reduction through 5+ and 4+ to 3+ has a potential to interact with the DNA molecule; and (6) if unrepaired, this DNA damage can lead to cancer induction. On the basis of current evidence Cr6+ has a threshold for carcinogenic potential in humans that is greater than the current TLV.

Natural and induced reduction of hexavalent chromium in soil

NASA Astrophysics Data System (ADS)

Leita, Liviana; Margon, Alja; Sinicco, Tania; Mondini, Claudio; Valentini, Massimiliano; Cantone, Pierpaolo

2013-04-01

Even though naturally elevated levels of chromium can be found naturally in some soils, distressing amounts of the hexavalent form (CrVI) are largely restricted to sites contaminated by anthropogenic activities. In fact, the widespread use of chromium in various industries and the frequently associated inadequate disposal of its by-products and wastes have created serious environmental pollution problems in many parts of the world. CrVI is toxic to plants, animals and humans and exhibits also mutagenic effects. However, being a strong oxidant, CrVI can be readily reduced to the much less harmful trivalent form (CrIII) when suitable electron donors are present in the environment. CrIII is relatively insoluble, less available for biological uptake, and thus definitely less toxic for web-biota. Various electron donors in soil can be involved in CrVI reduction in soil. The efficiency of CrVI reducing abiotic agents such as ferrous iron and sulphur compounds is well documented. Furthermore, CrVI reduction is also known to be significantly enhanced by a wide variety of cell-produced monosaccharides, including glucose. In this study we evaluated the dynamics of hexavalent chromium (CrVI) reduction in contaminated soil amended or not with iron sulphate or/and glucose and assessed the effects of CrVI on native or glucose-induced soil microbial biomass size and activity. CrVI negatively affected both soil microbial activity and the size of the microbial biomass. During the incubation period, the concentration of CrVI in soil decreased over time whether iron sulphate or/and glucose was added or not, but with different reduction rates. Soil therefore displayed a natural attenuation capacity towards chromate reduction. Addition of iron sulphate or/and glucose, however, increased the reduction rate by both abiotic and biotic mechanisms. Our data suggest that glucose is likely to have exerted an indirect role in the increased rate of CrVI reduction by promoting growth of indigenous microbial biomass, while iron sulphate exerted a direct abiotic role.

Impact of neoadjuvant chemotherapy and pathological complete response on eligibility for breast-conserving surgery in patients with early breast cancer: A meta-analysis.

PubMed

Criscitiello, Carmen; Golshan, Mehra; Barry, William T; Viale, Giulia; Wong, Stephanie; Santangelo, Michele; Curigliano, Giuseppe

2018-05-04

We conducted a meta-analysis of randomised trials evaluating pathological complete response (pCR) and surgical outcomes after neoadjuvant systemic therapy (NST) in patients with early breast cancer (EBC). The primary outcome was breast-conserving surgery (BCT) rate. Secondary outcomes were pCR rate and association to BCT. Meta-analyses were performed using random effects models that use inverse-variance weighting for each treatment arm based on evaluable patients. Point estimates are reported with 95% confidence interval (CI), and p < 0.05 was considered statistically significant. Thirty-six studies were identified (N = 12,311 patients). We selected for the analysis 16 of 36 studies reporting both pCR and BCT for at least one treatment arm. Arms per study ranged from one to six; 42 independent units were available to evaluate the association between pCR and BCT. BCT rate ranged 5-76% across arms with an average BCT of 57% (95% CI 52-62%). Significant heterogeneity was observed among the trials (Cochrane Q = 787, p < 0.001, I 2  = 97%). In the meta-regression model, BCT rates were not significantly associated with year of first patient-in (p = 0.89), grade (p = 0.93) and hormone-receptor status (p = 0.39). Clinical N-stage (p = 0.01) and human epidermal growth factor receptor (HER2) status (p = 0.03) were significantly associated with BCT. pCR rate ranged 3-60% across studies. The average pCR across all study arms was 24% (95% CI 19-29%). No association was observed between pCR rate in a study arm and the resulting BCT rate in a univariate model (p = 0.34) nor after adjusting for HER2 and clinical nodal status (p = 0.82). In the subset of 14 multi-arm studies, no significant association was seen between the differences in pCR and BCT between treatment arms (p = 0.27). pCR does not increase BCT in patients receiving NST for EBC. Copyright © 2018 Elsevier Ltd. All rights reserved.

Pathological complete response in patients with esophageal cancer after the trimodality approach: The association with baseline variables and survival-The University of Texas MD Anderson Cancer Center experience.

PubMed

Blum Murphy, Mariela; Xiao, Lianchum; Patel, Viren R; Maru, Dipen M; Correa, Arlene M; G Amlashi, Fatemeh; Liao, Zhongxing; Komaki, Ritsuko; Lin, Steven H; Skinner, Heath D; Vaporciyan, Ara; Walsh, Garrett L; Swisher, Stephen G; Sepesi, Boris; Lee, Jeffrey H; Bhutani, Manoop S; Weston, Brian; Hofstetter, Wayne L; Ajani, Jaffer A

2017-11-01

Reports are limited regarding clinical and pretreatment features that might predict a pathological complete response (pathCR) after treatment in patients with esophageal cancer (EC). This might allow patient selection for different strategies. This study examines the association of a pathCR with pretreatment variables, overall survival (OS), recurrence-free survival (RFS), and patterns of recurrence in a large cohort from a single institution. The baseline clinical features of 911 consecutive patients with EC who were treated with trimodality therapy from January 2000 to November 2013 were analyzed. A pathCR was defined as a surgical specimen with no residual carcinoma (primary or nodes). Logistic regressions were used to identify independent baseline features associated with a pathCR. We applied log-rank testing and Cox models to determine the association between a pathCR and the time-to-event outcomes (OS and RFS). Of 911 patients, 218 (23.9%) achieved a pathCR. The pathCR rate was 23.1% for adenocarcinoma and 32.2% for squamous cell carcinoma. A lower pathCR rate was observed for 1) older patients (>60 years), 2) patients with poorly differentiated tumors, 3) patients with signet ring cells (SRCs), and 4) patients with a higher T stage. Patients with a pathCR had longer OS and RFS than those without a pathCR (P = .0021 and P = .0011, respectively). Recurrences occurred more in non-pathCR patients. Distant metastases were the most common type of recurrence. PathCR patients developed brain metastases at a marginally higher rate than non-pathCR patients (P = .051). In this large cohort study, a pathCR is confirmed to be associated with better OS and RFS. The presence of a poorly differentiated tumor or SRCs reduces the likelihood of a pathCR. Future research should focus on molecular classifiers. Cancer 2017;123:4106-4113. © 2017 American Cancer Society. © 2017 American Cancer Society.

A study on the dissolution rates of K-Cr(VI)-jarosites: kinetic analysis and implications.

PubMed

Reyes, Iván A; Mireles, Ister; Patiño, Francisco; Pandiyan, Thangarasu; Flores, Mizraim U; Palacios, Elia G; Gutiérrez, Emmanuel J; Reyes, Martín

2016-01-01

The presence of natural and industrial jarosite type-compounds in the environment could have important implications in the mobility of potentially toxic elements such as lead, mercury, arsenic, chromium, among others. Understanding the dissolution reactions of jarosite-type compounds is notably important for an environmental assessment (for water and soil), since some of these elements could either return to the environment or work as temporary deposits of these species, thus would reduce their immediate environmental impact. This work reports the effects of temperature, pH, particle diameter and Cr(VI) content on the initial dissolution rates of K-Cr(VI)-jarosites (KFe3[(SO4)2 - X(CrO4)X](OH)6). Temperature (T) was the variable with the strongest effect, followed by pH in acid/alkaline medium (H3O(+)/OH(-)). It was found that the substitution of CrO4 (2-)in Y-site and the substitution of H3O(+) in M-site do not modify the dissolution rates. The model that describes the dissolution process is the unreacted core kinetic model, with the chemical reaction on the unreacted core surface. The dissolution in acid medium was congruent, while in alkaline media was incongruent. In both reaction media, there is a release of K(+), SO4 (2-) and CrO4 (2-) from the KFe3[(SO4)2 - X(CrO4)X](OH)6 structure, although the latter is rapidly absorbed by the solid residues of Fe(OH)3 in alkaline medium dissolutions. The dissolution of KFe3[(SO4)2 - X(CrO4)X](OH)6 exhibited good stability in a wide range of pH and T conditions corresponding to the calculated parameters of reaction order n, activation energy E A and dissolution rate constants for each kinetic stages of induction and progressive conversion. The kinetic analysis related to the reaction orders and calculated activation energies confirmed that extreme pH and T conditions are necessary to obtain considerably high dissolution rates. Extreme pH conditions (acidic or alkaline) cause the preferential release of K(+), SO4 (2-) and CrO4 (2-) from the KFe3[(SO4)2 - X(CrO4)X](OH)6 structure, although CrO4 (2-) is quickly adsorbed by Fe(OH)3 solid residues. The precipitation of phases such as KFe3[(SO4)2 - X(CrO4)X](OH)6, and the absorption of Cr(VI) after dissolution can play an important role as retention mechanisms of Cr(VI) in nature.

Electrochemical treatment of effluents containing Cr(VI). Influence of pH and current on the kinetic.

PubMed

Ruotolo, L A M; Santos-Júnior, D S; Gubulin, J C

2006-05-01

Compounds of Cr(VI) are very toxic and their reduction to Cr(III) is necessary to allow their further precipitation or adsorption. Chemical methods for Cr(VI) reduction are usually used for this purpose. As an alternative, electrochemical methods using three-dimensional electrodes, such as reticulated vitreous carbon (RVC) and polyaniline-modified RVC, have been used successfully. Since the pH affects reaction of Cr(VI) reduction, in this work its effect on the reaction rate was studied using electrodes of RVC and RVC/PANI. While a maximum in reaction rate was found for a pH 1.5 using the RVC, the RVC/PANI showed no differences in reaction rates in the range of pH between 0 and 1. Practically, no reaction was observed for any pH greater than 3. The effect of different current densities using optimized pH was also evaluated and the RVC/PANI electrode showed the best reaction rates, current efficiencies and energy consumption as a result of the polyaniline electrocatalytic effect.

Synthesis of 3D iron and carbon-based composite as a bifunctional sorbent and catalyst for remediation of organic pollutants

NASA Astrophysics Data System (ADS)

Li, Ling; Shen, Yi; Wang, Zhaomei

2017-07-01

We prepared a 3D monolith by integrating graphite nanosheet encapsulated iron nanoparticles (Fe@GNS) into graphite felt (GF) supports. The structural properties of the resulting Fe@GNS/GF monolith are characterized by x-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy and N2 adsorption-desorption isotherms. The Fe@GNS/GF monoliths are utilized as a bifunctional sorbent and catalyst for water remediation. Using Congo red and methyl violet 2B as model pollutants, the sorption and catalytic performance of the Fe@GNS/GF composite are examined. The Fe@GNS/GF monolith possesses maximum sorption capacities of 177 and 142 mg g-1 for the sorption of CR and MV-2B, respectively. It also exhibits rate constants of 0.0563 and 0.0464 min-1 for the catalytic degradation of CR and MV-2B, respectively. As a proof of concept, the Fe@GNS/GF is successfully utilized to decontaminate simulated organic waste water via a combination of sorption and catalytic degradation processes.

1300 K Compressive Properties of Directionally Solidified Ni-33Al-33Cr-1Mo

NASA Technical Reports Server (NTRS)

Whittenberger, J. Daniel; Raj, S. V.; Locci, Ivan E.

2000-01-01

The Ni-33Al-33Cr-1Mo eutectic has been directionally solidified by a modified Bridgeman technique at growth rates ranging from 7.6 to 508 mm/h to produce grain/cellular microstructures, containing alternating plates of NiAl and Cr alloyed with Mo. The grains had sharp boundaries for slower growth rates (< 12.7 mm/h), while faster growth rates (> 25.4 mm/h) lead to cells bounded by intercellular regions. Compressive testing at 1300 K indicated that alloys DS'ed at rates between 25.4 to 254 mm/h possessed the best strengths which exceed that for the as-cast alloy.

The reduction of CrVI to CrIII by the alpha and beta anomers of D-glucose in dimethyl sulfoxide. A comparative kinetic and mechanistic study.

PubMed

Signorella, S; Lafarga, R; Daier, V; Sala, L F

2000-02-11

The reduction of CrVI by alpha-D-glucose and beta-D-glucose was studied in dimethyl sulfoxide in the presence of pyridinium p-toluensulfonate, a medium where mutarotation is slower than the redox reaction. The two anomers reduce CrVI by formation of an intermediate CrVI ester precursor of the slow redox step. The equilibrium constant for the formation of the intermediate chromic ester and the rate of the redox steps are different for each anomer. alpha-D-Glucose forms the CrVI-Glc ester with a higher equilibrium constant than beta-D-glucose, but the electron transfer within this complex is slower than for the beta anomer. The difference is attributed to the better chelating ability of the 1,2-cis-diolate moiety of the alpha anomer. The CrV species, generated in the reaction mixture, reacts with the two anomers at a rate comparable with that of CrVI. The EPR spectra show that the alpha anomer forms several linkage isomers of the five-coordinate CrV bis-chelate, while beta-D-glucose affords a mixture of six-coordinate CrV monochelate and five-coordinate CrV bis-chelate. The conversion of the CrV mono- to bis-chelate is discussed in terms of the ability of the 1,2-cis- versus 1,2-trans-diolate moieties of the glucose anomers to bind CrV.

High-Temperature Mechanical Properties of Cr(3+) Doped Sapphire Fibers

NASA Technical Reports Server (NTRS)

Sayir, A.; QuispeCancapa, J. J.; deArellanoLopez, A. R.; Gray, Hugh R. (Technical Monitor)

2002-01-01

High-temperature slow-crack growth of single crystal 10 wt% Cr2O3 - Al2O3 (nominal composition) fibers has been studied by tensile rupture experiments at 1400 C, under different stressing rates (0.5 to 41.5 MPa/s). Slow-crack growth (SCG) is less pronounced with increasing Cr2O3. Rupture stresses increased with the stressing rate from 397 MPa to 515 MPa, resulting in a SCG exponent, N=19. The Cr2O3 composition was analyzed by Energy Dispersed X-Ray Spectra (EDS) and fracture surfaces were studied by scanning electron microscopy (SEM). Results are compared with previous studies on 100-300 ppm Cr3(+) doped sapphire fibers and on commercial sapphire fibers.

Redox and complexation chemistry of the CrVI/CrV-D-glucaric acid system.

PubMed

Mangiameli, María Florencia; González, Juan Carlos; Bellú, Sebastián; Bertoni, Fernando; Sala, Luis F

2014-06-28

When an excess of uronic acid over Cr(VI) is used, the oxidation of D-glucaric acid (Glucar) by Cr(VI) yields D-arabinaric acid, CO2 and Cr(III)-Glucar complex as final redox products. The redox reaction involves the formation of intermediate Cr(IV) and Cr(V) species. The reaction rate increases with [H(+)] and [substrate]. The experimental results indicated that Cr(IV) and Cr(V) are very reactive intermediates since their disappearance rates are much faster than Cr(VI). Cr(IV) and Cr(V) intermediates are involved in fast steps and do not accumulate in the redox reaction of the mixture Cr(VI)-Glucar. Kinetic studies show that the redox reaction between Glucar and Cr(VI) proceeds through a mechanism combining one- and two-electron pathways: Cr(VI) → Cr(IV) → Cr(II) and Cr(VI) → Cr(IV) → Cr(III). After the redox reaction, results show a slow hydrolysis of the Cr(III)-Glucar complex into [Cr(OH2)6](3+). The proposed mechanism is supported by the observation of free radicals, CrO2(2+) (superoxo-Cr(III) ion) and oxo-Cr(V)-Glucar species as reaction intermediates. The continuous-wave electron paramagnetic resonance, CW-EPR, spectra show that five-coordinate oxo-Cr(V) bischelates are formed at pH ≤ 4 with the aldaric acid bound to oxo-Cr(V) through the carboxylate and the α-OH group. A different oxo-Cr(V) species with Glucar was detected at pH 6.0. The high g(iso) value for the last species suggests a mixed coordination species, a five-coordinated oxo-Cr(V) bischelate with one molecule of Glucar acting as a bi-dentate ligand, using the 2-hydroxycarboxylate group, and a second molecule of Glucar with any vic-diolate sites. At pH 7.5 only a very weak EPR signal was observed, which may point to instability of these complexes. This behaviour contrasts with oxo-Cr(V)-uronic species, and must thus be related to the Glucar acyclic structure. In vitro, our studies on the chemistry of oxo-Cr(V)-Glucar complexes can provide information on the nature of the species that are likely to be stabilized in vivo.

Can the complementary relationship between actual and potential evaporation be used to quantify heatwaves?

NASA Astrophysics Data System (ADS)

Aminzadeh, Milad; Or, Dani

2017-04-01

Extreme climate events such as heatwaves with prolonged periods of high air temperatures have large environmental, social, and economic impacts ranging from crop failure to health and desiccation damages. Periods of low precipitation with high temperatures decrease soil moisture storage and thus affect surface energy partitioning. The heuristic concepts in the basis of the Complementary Relationship (CR) suggest that a fraction of radiative energy not used for evaporation contributes to increased sensible heat flux thus heats near-surface atmosphere. We have recently generalized the CR framework for spatially heterogeneous landscapes thereby enable prediction of actual evapotranspiration (ET) from routine atmospheric measurements. Capitalizing on the coupling between moisture availability, actual ET and sensible heat flux we propose using the CR to predict conditions conducive to rapid increase in regional sensible heat flux associated with the onset of extreme heatwaves. The proposed framework is evaluated using satellite surface temperature and FLUXNET data with newly derived metrics for the onset of heatwaves. The concepts could be extended to obtain new insights into the dynamics of more persistent climate extremes such as regional droughts.

Overview of lower length scale model development for accident tolerant fuels regarding U3Si2 fuel and FeCrAl cladding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yongfeng

2016-09-01

U3Si2 and FeCrAl have been proposed as fuel and cladding concepts, respectively, for accident tolerance fuels with higher tolerance to accident scenarios compared to UO2. However, a lot of key physics and material properties regarding their in-pile performance are yet to be explored. To accelerate the understanding and reduce the cost of experimental studies, multiscale modeling and simulation are used to develop physics-based materials models to assist engineering scale fuel performance modeling. In this report, the lower-length-scale efforts in method and material model development supported by the Accident Tolerance Fuel (ATF) high-impact-problem (HIP) under the NEAMS program are summarized. Significantmore » progresses have been made regarding interatomic potential, phase field models for phase decomposition and gas bubble formation, and thermal conductivity for U3Si2 fuel, and precipitation in FeCrAl cladding. The accomplishments are very useful by providing atomistic and mesoscale tools, improving the current understanding, and delivering engineering scale models for these two ATF concepts.« less

Using a Reminiscence-based Approach to Investigate the Cognitive Reserve of a Healthy Aging Population.

PubMed

Colombo, Barbara; Balzarotti, Stefania; Greenwood, Allison

2018-03-05

The concept of Cognitive Reserve (CR) has been used to account for brain plasticity in older adults that may underlie the resilience against the effects of aging or pathology on cognitive abilities. This study aims at exploring the proxies of CR in a sample of healthy older adults by analyzing their spontaneous reminiscence through a discourse analysis approach. Fifteen community-dwelling older adults were asked to participate in a video-recorded, spontaneous reminiscence interview. Interviews were transcribed according to Conversation Analysis, and two judges classified the interview content identifying five main markers of CR: enriched environment, cognitively stimulating activities, education, physical activity, and social interaction. Reminiscence allowed to identify markers of CR. Sharing stories that are linked to CR markers promote positive emotion, coherent sense of self, and cognitive evaluation of the importance of the social network. Reminisce looks like a possible approach not only to indirect evaluate the CR, but also to promote it. The reminisce approach can be used as a clinical tool to assess and increase the CR, help the clinical population to experience more positive emotions, maintain a more defined sense of self, and value more the social resources available.

Dynamic oxidation behavior of TD-NiCr alloy with different surface pretreatments

NASA Technical Reports Server (NTRS)

Young, C. T.; Tenney, D. R.; Herring, H. W.

1975-01-01

Oxidation tests of TD-NiCr alloy with different surface pretreatments were conducted in a Mach-5 arc-jet at 1200 C and 0.002 lb/sec flowing air environment. The mechanisms responsible for the observed oxidation behavior are examined. The presence of atomic oxygen in the air stream plays a significant role in determining the oxidation characteristic of the alloy. The rate of Cr2O3 vaporization by formation of volatile CrO3 is greatly enhanced by the flowing conditions. The typical microstructure of oxides formed in the dynamic tests consists of an external layer of NiO with a porous mushroom-type morphology, an intermediate layer of NiO and Cr2O3 oxide mixture, and a continuous inner layer of Cr2O3 in contact with the Cr-depleted alloy substrate. Three basic processes underlying the formation of mushroom-type NiO are identified and discussed. The oxidation rate is determined by the rate of vaporization of NiO. Surface pretreatment has a significant effect on the oxidation behavior of the alloy in the early stage of oxidation, but becomes less important as exposure time increases. Mechanical polishing induces surface recrystallization, but promotes the concurrence of external growth of NiO and internal oxidation of the alloy in the dynamic atmosphere.

Effect of Humic Acid on the Removal of Chromium(VI) and the Production of Solids in Iron Electrocoagulation.

PubMed

Pan, Chao; Troyer, Lyndsay D; Liao, Peng; Catalano, Jeffrey G; Li, Wenlu; Giammar, Daniel E

2017-06-06

Iron-based electrocoagulation can be highly effective for Cr(VI) removal from water supplies. However, the presence of humic acid (HA) inhibited the rate of Cr(VI) removal in electrocoagulation, with the greatest decreases in Cr(VI) removal rate at higher pH. This inhibition was probably due to the formation of Fe(II) complexes with HA that are more rapidly oxidized than uncomplexed Fe(II) by dissolved oxygen, making less Fe(II) available for reduction of Cr(VI). Close association of Fe(III), Cr(III), and HA in the solid products formed during electrocoagulation influenced the fate of both Cr(III) and HA. At pH 8, the solid products were colloids (1-200 nm) with Cr(III) and HA concentrations in the filtered fraction being quite high, while at pH 6 these concentrations were low due to aggregation of small particles. X-ray diffraction and X-ray absorption fine structure spectroscopy indicated that the iron oxides produced were a mixture of lepidocrocite and ferrihydrite, with the proportion of ferrihydrite increasing in the presence of HA. Cr(VI) was completely reduced to Cr(III) in electrocoagulation, and the coordination environment of the Cr(III) in the solids was similar regardless of the humic acid loading, pH, and dissolved oxygen level.

Chromate reduction and heavy metal fixation in soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwitzgebel, K.

In situ reduction of chromates and the fixation of the metals Cr, Pb, Zn, Cu, Cd and Ni in soil was investigated using Fe II and soluble silica. Fe II fulfills two functions. It reduces chromates (CrVI) at soil pH to CrIII and the reaction products, Fe(OH)[sub 3] and Cr(OH)[sub 3], coprecipitate/adsorb heavy metals. In the absence of CrVI iron is added as FeIII. Destabilized silica also fulfills two functions. It reacts with the metal and metal hydroxides and reduces the soil permeability. The leaching rate (mg/m[sup 2]s) of a metal is the product of leachate flow rate ([ell]/M[sup 2]s)more » and the leachate concentration (mg/[ell]). The leachate flow rate is directly proportional to the hydraulic coefficient (Darcy's Law). Treatment with destabilized silica reduces the hydraulic coefficient of virgin soil (K[sub h] = 10[sup [minus]2]...10[sup [minus]4]) to K[sub h]=10[sup [minus]7] (cm/s) resulting in a flow rate reduction of 3--5 orders of magnitude. Iron plus silica treatment results in a leachate concentration reduction of up to 2 orders of magnitude (Cr:95--99%;Pb:99%;Zn 95--99%; Cd:93--99%; Ni:75--94%). Combined effect of flow rate reduction and leachate concentration reduction results in a potential leaching rate reduction of five to seven orders of magnitude. Iron-silica treatment may be developed into an efficient containment technology, provided the silica gel integrity does not change with time.« less

Chromate reduction and heavy metal fixation in soil. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwitzgebel, K.

In situ reduction of chromates and the fixation of the metals Cr, Pb, Zn, Cu, Cd and Ni in soil was investigated using Fe II and soluble silica. Fe II fulfills two functions. It reduces chromates (CrVI) at soil pH to CrIII and the reaction products, Fe(OH){sub 3} and Cr(OH){sub 3}, coprecipitate/adsorb heavy metals. In the absence of CrVI iron is added as FeIII. Destabilized silica also fulfills two functions. It reacts with the metal and metal hydroxides and reduces the soil permeability. The leaching rate (mg/m{sup 2}s) of a metal is the product of leachate flow rate ({ell}/M{sup 2}s)more » and the leachate concentration (mg/{ell}). The leachate flow rate is directly proportional to the hydraulic coefficient (Darcy`s Law). Treatment with destabilized silica reduces the hydraulic coefficient of virgin soil (K{sub h} = 10{sup {minus}2}...10{sup {minus}4}) to K{sub h}=10{sup {minus}7} (cm/s) resulting in a flow rate reduction of 3--5 orders of magnitude. Iron plus silica treatment results in a leachate concentration reduction of up to 2 orders of magnitude (Cr:95--99%;Pb:99%;Zn 95--99%; Cd:93--99%; Ni:75--94%). Combined effect of flow rate reduction and leachate concentration reduction results in a potential leaching rate reduction of five to seven orders of magnitude. Iron-silica treatment may be developed into an efficient containment technology, provided the silica gel integrity does not change with time.« less

Characterization of Penicillium oxalicum SL2 isolated from indoor air and its application to the removal of hexavalent chromium

PubMed Central

Long, Bibo; Ye, Binhui; Liu, Qinglin; Zhang, Shu; Ye, Jien; Zou, Lina

2018-01-01

Removal of toxic Cr(VI) by microbial reduction is a promising approach to reducing its ecotoxicological impact. To develop bioremediation technologies, many studies have evaluated the application of microorganisms isolated from Cr(VI)-contaminated sites. Nonetheless, little attention has been given to microbes from the environments without a history of Cr(VI) contamination. In this study, we aimed to characterize the Cr(VI) tolerance and removal abilities of a filamentous fungus strain, SL2, isolated from indoor air. Based on phenotypic characterization and rDNA sequence analysis, SL2 was identified as Penicillium oxalicum, a species that has not been extensively studied regarding Cr(VI) tolerance and reduction abilities. SL2 showed high tolerance to Cr(VI) on solid and in liquid media, facilitating its application to Cr(VI)-contaminated environments. Growth curves of SL2 in the presence of 0, 100, 400, or 1000 mg/L Cr(VI) were well simulated by the modified Gompertz model. The relative maximal colony diameter and maximal growth rate decreased as Cr(VI) concentration increased, while the lag time increased. SL2 manifested remarkable efficacy of removing Cr(VI). Mass balance analysis indicated that SL2 removed Cr(VI) by reduction, and incorporated 0.79 mg of Cr per gram of dry biomass. In electroplating wastewater, the initial rate of Cr(VI) removal was affected by the initial contaminant concentration. In conclusion, P. oxalicum SL2 represents a promising new candidate for Cr(VI) removal. Our results significantly expand the knowledge on potential application of this microorganism. PMID:29381723

Cardiac patients show high interest in technology enabled cardiovascular rehabilitation.

PubMed

Buys, Roselien; Claes, Jomme; Walsh, Deirdre; Cornelis, Nils; Moran, Kieran; Budts, Werner; Woods, Catherine; Cornelissen, Véronique A

2016-07-19

Cardiac rehabilitation (CR) can slow or reverse the progression of cardiovascular disease (CVD). However, uptake of community-based CR is very low. E-cardiology, e-health and technology solutions for physical activity uptake and monitoring have evolved rapidly and have potential in CVD management. However, it is unclear what the current technology usage is of CVD patients, and their needs and interests for technology enabled CR. A technology usage questionnaire was developed and completed by patients from a supervised ambulatory CR program and an adult congenital heart disease clinic and from two community-based CR programs. Results were described and related with age, gender and educational level by Spearman correlations. Of 310 patients, 298 patients (77 % male; mean age 61,7 ± 14,5 years) completed at least 25 questions of the survey and were included in the analysis (completion rate 96 %). Most (97 %) patients had a mobile phone and used the internet (91 %). Heart rate monitors were used by 35 % and 68 % reported to find heart rate monitoring important when exercising at home. Physical activity monitoring was reported by 12 % of the respondents. Respondents were interested in CR support through internet (77 %) and mobile phone (68 %). Many patients reported interest in game-based CR (67 %) and virtual rehabilitation (58 %). At least medium interest in technology enabled CR was reported by 75 % of the patients. Interest decreased with increasing age (r = -0.16; p = 0.005). CVD patients show interest for technology enabled home-based CR. Our results could guide the design of a technology-based, virtual CR intervention.

Effect of cardiac rehabilitation referral strategies on utilization rates: a prospective, controlled study.

PubMed

Grace, Sherry L; Russell, Kelly L; Reid, Robert D; Oh, Paul; Anand, Sonia; Rush, James; Williamson, Karen; Gupta, Milan; Alter, David A; Stewart, Donna E

2011-02-14

Although cardiac rehabilitation (CR) has been shown to reduce mortality and is a recommended component in clinical practice guidelines, CR referral and utilization rates remain low. Referral strategies have been implemented to increase CR use but have yet to be compared concurrently. To determine the optimal strategy to maximize CR referral, enrollment, and participation, we evaluated 3 referral strategies compared with usual care: "automatic" only via discharge order or electronic record, health care provider liaison only, or a combined approach. In this prospective controlled study, 2635 inpatients with coronary artery disease from 11 Ontario, Canada, hospitals using 1 of the 4 referral strategies completed a sociodemographic survey, and clinical data were extracted from medical charts. One year later, 1809 participants completed a mailed survey that assessed CR utilization. Referral strategies were compared using generalized estimating equations to control for effect of hospital. Adjusted analyses revealed referral strategy was significantly related to CR referral and enrollment (P<.001). Combined automatic and liaison referral resulted in the greatest CR use (odds ratio [OR], 8.41; 85.8% referral, 73.5% enrollment), followed by automatic only (OR, 3.27; 70.2% referral, 60.0% enrollment), and liaison only (OR, 3.35; 59.0% referral, 50.6% enrollment), compared with usual referral (32.2% referral, 29.0% enrollment). The degree of CR participation did not differ by referral strategy among referred participants (mean [SD] percentage of classes attended, 82.87% [27.20%]; P=.88). Automatic referral combined with a patient discussion can achieve among the highest rates of CR referral reported. Wider adoption of such strategies could ensure that 45% more patients being treated for cardiac disease would have access to and realize the benefits of CR. ©2011 American Medical Association. All rights reserved.

Phase II Study of Neoadjuvant Anthracycline-Based Regimens Combined With Nanoparticle Albumin-Bound Paclitaxel and Trastuzumab for Human Epidermal Growth Factor Receptor 2-Positive Operable Breast Cancer.

PubMed

Tanaka, Satoru; Iwamoto, Mitsuhiko; Kimura, Kosei; Matsunami, Nobuki; Morishima, Hirotaka; Yoshidome, Katsuhide; Nomura, Takashi; Morimoto, Takashi; Yamamoto, Daigo; Tsubota, Yu; Kobayashi, Toshihiro; Uchiyama, Kazuhisa

2015-06-01

We treated patients with operable human epidermal growth factor receptor 2-positive breast cancer with neoadjuvant anthracycline regimens followed by nanoparticle albumin-bound paclitaxel plus trastuzumab. Of the 44 patients, 49% achieved a pathologic complete response (pCR). The pCR rate was 36% and 71% in the patients with estrogen receptor-positive and -negative cancer, respectively. Neoadjuvant therapy using this combination appears to be effective and safe. Introduction: Neoadjuvant chemotherapy plus trastuzumab. Neoadjuvant chemotherapy plus trastuzumab results in a 30% to 50% pathologic complete response (pCR) rate in human epidermal growth factor receptor 2 (HER2)-positive breast cancer and has been associated with improved therapeutic outcomes. Thus, the pCR rate can be useful in evaluating novel agents in this patient population. Nanoparticle albumin-bound (nab)-paclitaxel (PTX) can reduce the toxicity of PTX while maintaining its efficacy. The present study evaluated the activity and safety of nab-PTX as a neoadjuvant treatment of HER2(+) breast cancer. We treated patients with stage I to IIIA breast cancer using neoadjuvant epirubicin/cyclophosphamide (EC) or 5-fluorouracil/epirubicin/cyclophosphamide every 3 weeks (q3w) for 4 cycles, followed by nab-PTX (260 mg/m(2)) plus trastuzumab q3w for 4 cycles. The primary endpoint was the pCR rate. The secondary endpoints included the clinical response rate, disease-free survival, pathologic response rate (defined as pCR or minimal residual invasive disease only in the breast), breast-conserving surgery rate, and safety. Forty-six patients were enrolled. One patient met the exclusion criteria because of the coexistence of another malignant disease; therefore, we evaluated 45 patients in the entire study. One patient experienced rapid disease progression during EC therapy, leaving 44 patients evaluable for nab-PTX treatment. Of the 45 patients, 49% achieved a pCR. The pCR rate was 36% and 71% in those with estrogen receptor-positive and -negative cancer, respectively. Of all the study treatments, the most frequent reason for delay or dose reduction was hematologic toxicity; only 1 patient required a dose reduction for nab-PTX because of peripheral neuropathy. Neoadjuvant therapy using this combination appears to be effective and safe. Copyright © 2015 Elsevier Inc. All rights reserved.

Effect of available nitrogen on phytoavailability and bioaccumulation of hexavalent and trivalent chromium in hankow willows (Salix matsudana Koidz).

PubMed

Yu, Xiao-Zhang; Gu, Ji-Dong

2008-06-01

The effect of available nitrogen in nutrient solution on removal of two chemical forms of chromium (Cr) by plants was investigated. Pre-rooted hankow willows (Salix matsudana Koidz) were grown in a hydroponic solution system with or without nitrogen, and amended with hexavalent chromium [Cr (VI)] or trivalent chromium [Cr (III)] at 25.0+/-0.5 degrees C for 192 h. The results revealed that higher removal of Cr by plants was achieved from the hydroponic solutions without any nitrogen than those containing nitrogen. Although faster removal of Cr (VI) than Cr (III) was observed, translocation of Cr (III) within plant materials was more efficient than Cr (VI). Substantial difference existed in the distribution of Cr in different parts of plant tissues due to the nitrogen in nutrient solutions (p<0.05): lower stems were the major sink for both Cr species in willows grown in the N-free nutrient solutions and more Cr was accumulated in the roots of plants in N-containing ones. No significant difference was found in the removal rate of Cr (VI) between willows grown in the N-free and N-containing solutions (p>0.05). Removal rates of Cr (III) decreased linearly with the strength of nutrient solutions with or without N addition (p<0.01). Translocation efficiencies of both Cr species increased proportionally with the strength of N-containing nutrient solutions and decreased with the strength of N-free nutrient solutions. Results suggest that uptake and translocation mechanisms of Cr (VI) and Cr (III) are apparently different in hankow willows. The presence of easily available nitrogen and other nutrient elements in the nutrient solutions had a more pronounced influence on the uptake of Cr (III) than Cr (VI). Nitrogen availability and quantities in the ambient environment will affect the translocation of both Cr species and their distribution in willows in phytoremediation.

Low-field spin dynamics of Cr7Ni and Cr7Ni-Cu -Cr 7Ni molecular rings as detected by μ SR

NASA Astrophysics Data System (ADS)

Sanna, S.; Arosio, P.; Bordonali, L.; Adelnia, F.; Mariani, M.; Garlatti, E.; Baines, C.; Amato, A.; Sabareesh, K. P. V.; Timco, G.; Winpenny, R. E. P.; Blundell, S. J.; Lascialfari, A.

2017-11-01

Muon spin rotation measurements were used to investigate the spin dynamics of heterometallic Cr7Ni and Cr7Ni -Cu-Cr7Ni molecular clusters. In Cr7Ni the magnetic ions are arranged in a quasiplanar ring and interact via an antiferromagnetic exchange coupling constant J , while Cr7Ni -Cu-Cr7Ni is composed of two Cr7Ni linked by a bridging moiety containing one Cu ion, that induces an inter-ring ferromagnetic interaction J'≪J . The longitudinal muon relaxation rate λ collected at low magnetic fields μ0H <0.15 Tesla, shows that the two systems present differences in spin dynamics vs temperature. While both samples exhibit a main peak in the muon relaxation rate vs temperature, at T ˜10 K for Cr7Ni and T ˜8 K for Cr7Ni -Cu-Cr7Ni , the two compounds have distinct additional features: Cr7Ni shows a shoulder in λ (T ) for T <8 K, while Cr7Ni -Cu-Cr7Ni shows a flattening of λ (T ) for T <2 K down to temperatures as low as T =20 mK. The main peak of both systems is explained by a Bloembergen-Purcell-Pound (BPP)-like heuristic fitting model that takes into account of a distribution of electronic spin characteristic times for T >5 K, while the shoulder presented by Cr7Ni can be reproduced by a BPP function that incorporates a single electronic characteristic time theoretically predicted to dominate for T <5 K. The flattening of λ (T ) in Cr7Ni -Cu-Cr7Ni occurring at very low temperature can be tentatively attributed to field-dependent quantum effects and/or to an inelastic term in the spectral density of the electronic spin fluctuations.

Role of diffusion tensor imaging or magnetic resonance spectroscopy in the diagnosis and disability assessment of amyotrophic lateral sclerosis.

PubMed

Liu, Chanchan; Jiang, Rifeng; Yi, Xiyan; Zhu, Wenzhen; Bu, Bitao

2015-01-15

To compare the results of magnetic resonance spectroscopy (MRS) and diffusion tensor imaging (DTI) in amyotrophic lateral sclerosis (ALS) patients. Nineteen ALS patients and thirteen age-matched healthy controls underwent MRS and DTI between October 2013 and July 2014. Fractional anisotropy (FA), apparent diffusion coefficient (ADC), N-acetylaspartate (NAA), choline (Cho), and creatine (Cr) were collected as the quantitative results of the imaging study. The ALS functional rating scale-revised (ALSFRS-R) and disease progression rate were evaluated to assess patients' disability. The imaging study results were compared between ALS patients and healthy controls. The relationship between disability assessment and imaging study results was analyzed. NAA/Cr in the motor cortex and FA in the corticospinal tract (CST) of both sides were significantly lower in patients than controls. There was no significant difference between the two groups in Cho/Cr, tract length, tract volume, ADC or NAA. No relationship was found between ALSFRS-R and FA (r=0.243, p=0.316) in the right CST; NAA (r=0.095, p=0.699) or NAA/Cr (r=0.172, p=0.481) in the left motor cortex; or NAA (r=0.320, p=0.182) or NAA/Cr (r=0.193, p=0.492) in the right motor cortex. There was no relationship between the disease progression rate and FA, NAA, or NAA/Cr on either side. NAA/Cr and FA can help diagnose ALS. Regional brain NAA/Cr and FA values could not assess the ALSFRS-R or disease progression rate. Copyright © 2014 Elsevier B.V. All rights reserved.

A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

PubMed

de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

2013-12-01

To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

Effects of dietary chromium (III) picolinate on growth performance, respiratory rate, plasma variables, and carcass traits of pigs fed high-fat diets.

PubMed

Kim, Beob G; Lindemann, Merlin D; Cromwell, Gary L

2010-02-01

We investigated the effects of supplemental chromium (Cr) as Cr (III) picolinate on pigs fed high-fat diets (HFD) in a 56-day experiment. Thirty-two crossbred pigs (9.6 kg) were allotted to four treatments with four blocks and two pigs/pen. Treatments included: (1) low-fat diet (fat < 3.5%; LFD) with no Cr, (2) HFD (fat > 30%) with no Cr, (3) HFD with 1,000 ppb Cr, and (4) HFD with 2,000 ppb Cr. Pigs fed HFD gained weight faster, consumed less, and had lower feed:gain (p < 0.05). Pigs fed HFD had higher respiration rates than pigs fed LFD on d 41 (p < 0.05). Plasma insulin on d 14 linearly decreased with Cr (p = 0.05). Plasma cholesterol concentrations were higher in the pigs fed HFD than those fed LFD, but were largely unaffected by supplemental Cr. Consumption of HFD resulted in greater carcass weight, perirenal fat, and backfat measures (p < 0.01) compared with the LFD group. Cr resulted in linear reductions of hot carcass weight (p = 0.08) and average backfat (p < 0.05). The effects of Cr on carcass fat measures were more pronounced in castrated males than in females. These results indicate that Cr attenuates some effects of a HFD, mainly body fat accretion of pigs, and especially in castrated pigs.

Improvement of parameters of freezing medium and freezing protocol for bull sperm using two osmotic supports.

PubMed

Chaveiro, A; Machado, L; Frijters, A; Engel, B; Woelders, H

2006-06-01

The aim of this study was to improve the freezing protocol of bull sperm, by investigating the influence on sperm viability after freeze/thawing of different freezing medium components, as well as the effect of cooling rates in the different stages of the cooling protocol, in single factor experiments. The experimental variables were: (1) salt-based versus a sugar-based medium (Tris versus sucrose); (2) glycerol concentration; (3) detergent (Equex) concentration; (4) presence of bicarbonate; (5) rate of cooling from 22 degrees C to holding temperature (CR1); (6) holding temperature (HT); (7) rate of cooling from holding temperature to -6 degrees C (CR2); (8) rate of cooling from -10 to -100 degrees C (CR3). All experiments were performed using five bulls per experiment (three ejaculates per bull). Sperm motility after freezing and thawing was assessed by CASA system, and sperm membrane integrity was assessed by flow cytometry. Sucrose-based medium did not offer a clear significant benefit compared to Tris medium. The concentration of Equex that gave the best results in Tris-based media group and sucrose-based media group was in a range between 2-7 and 4-7 g/l, respectively. In both media groups, a glycerol concentration of 800 mM was the best in any post-thaw viability parameters. In the Tris media group, the presence of bicarbonate had a negative effect on sperm viability. CR1 and CR2 had no significant effect on any of the post-thaw sperm viability parameters, but a CR1=0.2 degrees C/min and CR2=4 degrees C/min appeared to give better results in both media. The holding temperature (HT) that gave the best results was found to be in the range of 5-9 degrees C. There was a significant disadvantage of using a low CR3 of 10 degrees C/min, while 150 degrees C/min appeared to be the best cooling rate for either medium.

CrIII as an alternative to RuII in metallo-supramolecular chemistry.

PubMed

Zare, Davood; Doistau, Benjamin; Nozary, Homayoun; Besnard, Céline; Guénée, Laure; Suffren, Yan; Pelé, Anne-Laure; Hauser, Andreas; Piguet, Claude

2017-07-18

Compared to divalent ruthenium coordination complexes, which are widely exploited as parts of multi-component photonic devices, optically active trivalent chromium complexes are under-represented in multi-metallic supramolecular architectures performing energy conversion mainly because of the tricky preparation of stable heteroleptic Cr III building blocks. We herein propose some improvements with the synthesis of a novel family of kinetically inert heteroleptic bis-terdentate mononuclear complexes, which can be incorporated into dinuclear rod-like dyads as a proof-of-concept. The mechanism and magnitude of intermetallic CrCr communication have been unraveled by a combination of magnetic, photophysical and thermodynamic investigations. Alternated aromatic/alkyne connectors provided by Sonogashira coupling reactions emerge as the most efficient wires for long-distance communication between two chromium centres bridged by Janus-type back-to-back bis-terdentate receptors.

Expanding the dairy herd in pasture-based systems: The role of sexed semen within alternative breeding strategies.

PubMed

Murphy, C; Shalloo, L; Hutchinson, I A; Butler, S T

2016-08-01

A simulation model was developed to determine the effects of sexed semen use in heifers and lactating cows on replacement heifer numbers and rate of herd expansion in a seasonal dairy production system. Five separate artificial insemination (AI) protocols were established according to the type of semen used: (1) conventional frozen-thawed semen (CONV); (2) sexed semen in heifers and conventional semen used in cows (SS-HEIFER); (3) sexed semen in heifers and a targeted group of cows (body condition score ≥3 and calved ≥63 d), with conventional semen used in the remainder of cows (SS-CONV); (4) sexed semen in heifers and a targeted group of cows, with conventional semen in the remainder of cows for the first AI and conventional beef semen used for the second AI (SS-BEEF); or (5) sexed semen in heifers and a targeted group of cows, with conventional semen in the remainder of cows for the first AI and short gestation length semen used for the second AI (SS-SGL). Each AI protocol was assessed under 3 scenarios of sexed semen conception rate (SS-CR): 100, 94, and 87% relative to that of conventional semen. Artificial insemination was used on heifers for the first 3 wk and on cows for the first 6 wk of the 12-wk breeding season. The initial herd size was 100 cows, and all available replacement heifers were retained to facilitate herd expansion, up to a maximum herd size of 300 cows. Once maximum herd size was reached, all excess heifer calves were sold at 1 mo old. All capital expenditure associated with expansion was financed with a 15-yr loan. Each AI protocol was evaluated in terms of annual farm profit, annual cash flow, and total discounted net profit. The SS-CONV protocol generated more replacement heifers than all other AI protocols, facilitating faster expansion, and reached maximum herd size in yr 9, 9, and 10 for 100, 94, and 87% SS-CR, respectively. All AI protocols, except SS-BEEF and SS-SGL at 87% SS-CR, reached maximum herd size within the 15-yr period. Negative profit margins were experienced for SS-CONV in the first 5, 4, and 3 yr of expansion for 100, 94, and 87% SS-CR, respectively. Total discounted net profit was greater in all sexed semen AI protocols compared with CONV. This study demonstrated that, for each SS-CR, the greatest rate of expansion is achieved when using sexed and conventional semen (SS-CONV). The combined use of sexed semen and beef (SS-BEEF) or SGL (SS-SGL) semen resulted in greater discounted net profit at 100, 94, and 87% SS-CR compared with CONV, but a similar net worth change at 87% SS-CR due to a lower inventory change because SS-BEEF and SS-SGL reached maximum herd size within 15 yr. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effects of Cr Content and Surface Finishes on Oxidation Behaviors of Austenitic Fe-Cr-Ni Alloys Exposed in Supercritical Water (SCW)

NASA Astrophysics Data System (ADS)

Xing, Bo

The scope of this work was to characterize the corrosion resistance of candidate austenitic alloys in supercritical water for the use of the fuel cladding material within the Canadian supercritical water-cooled reactor (SCWR) concept. A series of Commercial austenitic stainless steels (SS) and alloys were exposed to supercritical water for different exposure times up to 500 hours. Two surface finishes were applied - a coarse grinding with 120 grit abrasive or polishing with either 1200 grit or 0.05 microm alumina suspension. Gravimetric measurements and electron microscopy techniques were used to evaluate the oxidation behaviors of tested alloys. The superior corrosion resistance of alloy 310S was benefited from a critical Cr content of 25 wt.%. The surface finish played a significant role to vary the oxidation behavior of alloys containing slightly less than the critical Cr content. However, Oxide exfoliation was observed on low Cr content alloys.

Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys

DOE PAGES

Zhang, Chuan; Zhang, Fan; Diao, Haoyan; ...

2016-07-19

The concept of high entropy alloy (HEA) opens a vast unexplored composition range for alloy design. As a well-studied system, Al-Co-Cr-Fe-Ni has attracted tremendous amount of attention to develop new-generation low-density structural materials for automobile and aerospace applications. In spite of intensive investigations in the past few years, the phase stability within this HEA system is still poorly understood and needs to be clarified, which poses obstacles to the discovery of promising Al-Co-Cr-Fe-Ni HEAs. In the present work, the CALPHAD approach is employed to understand the phase stability and explore the phase transformation within the Al-Co-Cr-Fe-Ni system. As a result,more » the phase-stability mapping coupled with density contours is then constructed within the composition - temperature space, which provides useful guidelines for the design of low-density Al-Co-Cr-Fe-Ni HEAs with desirable properties.« less

Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Chuan; Zhang, Fan; Diao, Haoyan

The concept of high entropy alloy (HEA) opens a vast unexplored composition range for alloy design. As a well-studied system, Al-Co-Cr-Fe-Ni has attracted tremendous amount of attention to develop new-generation low-density structural materials for automobile and aerospace applications. In spite of intensive investigations in the past few years, the phase stability within this HEA system is still poorly understood and needs to be clarified, which poses obstacles to the discovery of promising Al-Co-Cr-Fe-Ni HEAs. In the present work, the CALPHAD approach is employed to understand the phase stability and explore the phase transformation within the Al-Co-Cr-Fe-Ni system. As a result,more » the phase-stability mapping coupled with density contours is then constructed within the composition - temperature space, which provides useful guidelines for the design of low-density Al-Co-Cr-Fe-Ni HEAs with desirable properties.« less

Oxygen isotopic relationships between the LEW85332 carbonaceous chondrite and CR chondrites

NASA Technical Reports Server (NTRS)

Prinz, M.; Weisberg, M. K.; Clayton, R. N.; Mayeda, T. K.

1993-01-01

LEW85332, originally described as a unique C3 chondrite, was shown to be a C2 chondrite with important linkages to the CR clan. An important petrologic aspect of LEW85332 is that it contains anhydrous chondrules and hydrated matrix, and new oxygen isotopic data on chondrules, matrix and whole rock are consistent with the petrology. Chondrules fall on the equilibrated chondrite line (ECL), with a slope near 1, which goes through ordinary chondrite chondrules. This contrasts with the CR chondrule line which has a lower slope due to hydrated components. LEW85332 chondrules define a new carbonaceous chondrite chondrule line, parallel to the anhydrous CV chondrule line (CCC), consistent with the well-established concept of two oxygen isotopic reservoirs. Matrix and whole rock fall on the CR line. The whole rock composition indicates that the chondrite is dominated by chondrules, and that most of them contain light oxygen similar to that of anhydrous olivine and pyroxene separates in the Renazzo and Al Rais CR chondrites.

Speciation and preservation of CrVI and CrIII in finished drinking water matrices using collision cell ion chromatography-inductively coupled plasma-mass spectrometry

EPA Science Inventory

The polyatomic background at the major isotope of Cr was evaluated as a function of collision cell gas flow rate using three different mobile phases. The stability of CrVI was evaluated as a function of solution pH using an enriched 53CrVI. The recovery was ≥ 95% at pH 7.8 but...

Design and aero-acoustic analysis of a counter-rotating wind turbine

NASA Astrophysics Data System (ADS)

Agrawal, Vineesh V.

Wind turbines have become an integral part of the energy business because they are one of the most economical and reliable sources of renewable energy. Conventional wind turbines are capable of capturing less than half of the energy present in the wind. Hence, to make the wind turbines more efficient, it is important to increase their performance. A horizontal axis wind turbine with multiple rotors is one concept that can achieve a higher power conversion rate. Also, a concern for wind energy is the noise generated by wind turbines. Hence, an investigation into the acoustic behavior of a multi-rotor horizontal axis wind turbine is required. In response to the need of a wind turbine design with higher power coefficient, a unique design of a counter-rotating horizontal axis wind turbine (CR-HAWT) is proposed. The Blade Element Momentum (BEM) theory is used to aerodynamically design the blades of the two rotors. Modifications are made to the BEM theory to accommodate the interaction of the two rotors. The tower effect on the noise generation of the downwind rotor is investigated. Predictions are made for the total noise generated by the wind turbine at its design operating conditions. A total power coefficient of 65.2% is predicted for the proposed CR-HAWT design. A low tip speed ratio is chosen to minimize the noise generation. The aeroacoustic analysis of the CR-HAWT shows that the noise generated at its design operating conditions is within an acceptable range. Thus, the CR-HAWT is predicted to be a quiet wind turbine with a high power coefficient, making it highly desirable for small wind turbine applications.

The role of EDTA in phytoextraction of hexavalent and trivalent chromium by two willow trees.

PubMed

Yu, Xiao-Zhang; Gu, Ji-Dong

2008-04-01

Effects of the synthetic chelator ethylenediamine tetraacetate (EDTA) on uptake and internal translocation of hexavalent and trivalent chromium by plants were investigated. Two different concentrations of EDTA were studied for enhancing the uptake and translocation of Cr from the hydroponic solution spiked with K(2)CrO(4) or CrCl(3) maintained at 24.0 +/- 1 degrees C. Faster removal of Cr(3+) than Cr(6+) by hybrid willows (Salix matsudana Koidz x Salix alba L.) from the plant growth media was observed. Negligible effect of EDTA on the uptake of Cr(6+) was found, but significant decrease of the Cr concentration in roots was measured. Although the translocation of Cr(6+) within plant materials was detected in response to EDTA concentration, the amount of Cr(6+) translocated to the lower stems was considerably small. EDTA in the nutrient media showed a negative effect on the uptake of Cr(3+ )by hybrid willows; the removal rates of Cr(3+ )were significantly decreased. Translocation of Cr(3+) into the stems and leaves was undetectable, but roots were the exclusive sink for Cr(3+) accumulation. Weeping willows (Salix babylonica L.) showed lower removal rates for both chemical forms of Cr than hybrid willows. Although EDTA had a minor effect on Cr(6+ )uptake by weeping willows, positive effect on Cr(6+ )translocation within plant materials was observed. It was also determined that EDTA in plant growth media significantly decreased the amount of Cr(3+) taken up by plants, but significantly increased Cr(3+) mobilization from roots to stems. Results indicated that EDTA was unable to increase the uptake of Cr(6+) by both plant species, but translocation of Cr(6+)-EDTA within plant materials was possible. Addition of EDTA in the nutrient media showed a strong influence on the uptake and translocation of Cr(3+) in both willows. Cr(3+)-EDTA in tissues of weeping willows was more mobile than that in hybrid willows. The information has important implications for the use of metal chelator in plant nutritional research.

The effect of Be and Cr electrode deposition rate on the performance of MIS solar cells

NASA Astrophysics Data System (ADS)

Moharram, A. H.; Panayotatos, P.; Yeh, J. L.; Lalevic, B.

1985-07-01

An experimental study has been performed on MIS solar cells with Be, Cr and layered Cr-Be electrodes on single crystal Si, Wacker and Monsanto poly-Si substrates. Electrical characterization in the dark and under illumination was correlated to X-ray and Auger spectroscopy results. It was found that the electrode deposition rate directly affects the oxygen content of the electrodes for all metal-substrate configurations. This oxygen is believed to originate from the deposition ambient as well as from the SiO2 layer. In the case of cells with Cr and layered Cr-Be electrodes oxygen acts to reduce the electrode work function (thus increasing the open-circuit voltage) in direct proportion to the relative content of oxygen to chromium.

Calorie restriction hysteretically primes aging Saccharomyces cerevisiae toward more effective oxidative metabolism.

PubMed

Tahara, Erich B; Cunha, Fernanda M; Basso, Thiago O; Della Bianca, Bianca E; Gombert, Andreas K; Kowaltowski, Alicia J

2013-01-01

Calorie restriction (CR) is an intervention known to extend the lifespan of a wide variety of organisms. In S. cerevisiae, chronological lifespan is prolonged by decreasing glucose availability in the culture media, a model for CR. The mechanism has been proposed to involve an increase in the oxidative (versus fermentative) metabolism of glucose. Here, we measured wild-type and respiratory incompetent (ρ(0)) S. cerevisiae biomass formation, pH, oxygen and glucose consumption, and the evolution of ethanol, glycerol, acetate, pyruvate and succinate levels during the course of 28 days of chronological aging, aiming to identify metabolic changes responsible for the effects of CR. The concomitant and quantitative measurements allowed for calculations of conversion factors between different pairs of substrates and products, maximum specific substrate consumption and product formation rates and maximum specific growth rates. Interestingly, we found that the limitation of glucose availability in CR S. cerevisiae cultures hysteretically increases oxygen consumption rates many hours after the complete exhaustion of glucose from the media. Surprisingly, glucose-to-ethanol conversion and cellular growth supported by glucose were not quantitatively altered by CR. Instead, we found that CR primed the cells for earlier, faster and more efficient metabolism of respiratory substrates, especially ethanol. Since lifespan-enhancing effects of CR are absent in respiratory incompetent ρ(0) cells, we propose that the hysteretic effect of glucose limitation on oxidative metabolism is central toward chronological lifespan extension by CR in this yeast.

Caloric restriction impedes age-related decline of mitochondrial function and neuronal activity

PubMed Central

Lin, Ai-Ling; Coman, Daniel; Jiang, Lihong; Rothman, Douglas L; Hyder, Fahmeed

2014-01-01

Caloric restriction (CR) prolongs lifespan and retards many detrimental effects of aging, but its effect on brain mitochondrial function and neuronal activity—especially in healthy aging—remains unexplored. Here we measured rates of neuronal glucose oxidation and glutamate–glutamine neurotransmitter cycling in young control, old control (i.e., healthy aging), and old CR rats using in vivo nuclear magnetic resonance spectroscopy. We found that, compared with the young control, neuronal energy production and neurotransmission rates were significantly reduced in healthy aging, but were preserved in old CR rats. The results suggest that CR mitigated the age-related deceleration of brain physiology. PMID:24984898

Superradiant Decay of Cyclotron Resonance of Two-Dimensional Electron Gases

NASA Astrophysics Data System (ADS)

Zhang, Qi; Arikawa, Takashi; Kato, Eiji; Reno, John L.; Pan, Wei; Watson, John D.; Manfra, Michael J.; Zudov, Michael A.; Tokman, Mikhail; Erukhimova, Maria; Belyanin, Alexey; Kono, Junichiro

2014-07-01

We report on the observation of collective radiative decay, or superradiance, of cyclotron resonance (CR) in high-mobility two-dimensional electron gases in GaAs quantum wells using time-domain terahertz magnetospectroscopy. The decay rate of coherent CR oscillations increases linearly with the electron density in a wide range, which is a hallmark of superradiant damping. Our fully quantum mechanical theory provides a universal formula for the decay rate, which reproduces our experimental data without any adjustable parameter. These results firmly establish the many-body nature of CR decoherence in this system, despite the fact that the CR frequency is immune to electron-electron interactions due to Kohn's theorem.

Effects of citrate on hexavalent chromium reduction by structural Fe(II) in nontronite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Xiaolei; Dong, Hailiang; Yang, Xuewei

Iron-bearing clay minerals and organic matter are two important components in natural environments that influence hexavalent chromium (Cr(VI)) reduction. Previous studies have shown that organic ligands could influence Cr(VI) reduction by aqueous Fe2+ and pyrite. However, the effects of organic ligands on Cr(VI) reduction by structural Fe(II) in clays are not well understood. In this study, the effects of citrate on Cr(VI) reduction by nontronite (NAu-2) were investigated under near neutral pH condition (pH=6). Our results showed that the presence of citrate decreased the rate but increased the amount of Cr(VI) reduction by structural Fe(II) in NAu-2. The decreased reactionmore » rate was likely due to competitive sorption of citrate and polyanionic dichromate (Cr2O7- ), because sorption of dichromate appeared to be the first step for subsequent Cr(VI) reduction. The increased amount of Cr(VI) reduction in the presence of citrate was likely because citrate provided additional reducing power through ligand-metal electron transfer in the presence of soluble Fe 3+ derived from dissolution of reduced NAu-2. Soluble Cr(III)-citrate complex was the possible form of reduced chromium when citrate was present. In contrast, nanometer-sized Cr2O3 particles were the product of Cr(VI) reduction by reduced NAu-2 without citrate. Our study highlights the importance of organic ligands on Cr(VI) reduction and immobilization when iron-bearing clay minerals are applied to treat Cr(VI) contaminant in organic matter rich environments.« less

Comprehensive Review on the Surrogate Endpoints of Efficacy Proposed or Hypothesized in the Scientific Community Today.

PubMed

von Minckwitz, Gunter; Fontanella, Caterina

2015-05-01

An intermediate endpoint is a surrogate marker of treatment efficacy assessed earlier than the true outcome of interest. A suitable intermediate endpoint in neoadjuvant trials of specific breast cancer subtypes is pathological complete response (pCR) rate, defined as no invasive (+/-noninvasive) residual cancer in breast and nodes at surgery. On the basis of available evidence, Food and Drug Administration the US allowed to use of pCR as a surrogate endpoint for accelerated approval process. However, surrogacy to long-term outcome remains an unresolved issue. Literature data provide indications that triple-negative, HER2-positive, and high-grade hormone receptor-positive breast cancer subtypes achieved the highest pCR rate; the prognostic impact of pCR on survival is established only for these aggressive subtypes. In the German experience, early response after two to four cycles of neoadjuvant treatment strongly correlated with both pCR rate and long-term outcome. Therefore, early response may be considered a predictive marker for pCR and used for driving clinical trial design. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Overhead Bryant's Traction Does Not Improve the Success of Closed Reduction or Limit AVN in Developmental Dysplasia of the Hip.

PubMed

Sucato, Daniel J; De La Rocha, Adriana; Lau, Karlee; Ramo, Brandon A

2017-03-01

Preoperative Bryant's overhead traction before closed reduction (CR) in developmental dysplasia of the hip (DDH) remains controversial and its success in increasing CR rates and reducing avascular necrosis (AVN) rates has not been specifically reported in a large cohort. IRB-approved retrospective study of patients (below 3 y)who were treated with attempted CR for idiopathic DDH from 1980 to 2009. Successful CR was defined as a hip that remained reduced and did not require repeat CR or open reduction. Patients were grouped by age, hip instability [Ortolani positive (reducible) vs. fixed dislocation], and Tonnis classification and rates of successful CR were compared between groups with P<0.05. A total of 342 hips were included with a mean age of 0.9 years (0.2 to 2.8 y) and a mean follow-up of 10.4 years (2.0 to 27.7 y). There were 269 hips with fixed dislocations and 73 Ortolani-positive hips. Traction was used in 276 hips. There was no difference in traction utilization in the 3 age groups (below 1, below 1.5, and below 2 y) for either Ortolani-positive hips (P=0.947) or fixed dislocations (P=0.943). There was no difference in achieving a successful CR comparing traction (60.9%) and no-traction groups (60.6%) (P=1.00). For Ortolani-positive hips, traction did not improve the incidence of a successful CR for any age group: below 1 year: P=0.19; below 1.5 years: P=0.23; and below 2 years: P=0.25. Similarly, fixed dislocation patients had no benefit from traction: below 1 year: P=0.76; below 1.5 years: P=0.82; and below 2 years: P=0.85. Tonnis classification did predict success of CR but had no influence on traction success. There was no difference in the rate of AVN between the traction (18%) and no-traction (8%) groups for all patients (P=0.15). In this retrospective series, preoperative Bryant's traction does not improve the rate of a successful CR for patients with DDH and has no protective effect on the development of AVN of the femoral head. These results suggest that Bryant's overhead traction may not be warranted for patients below 3 years of age with DDH. Level III.

Pertuzumab/Trastuzumab/CT Versus Trastuzumab/CT Therapy for HER2+ Breast Cancer: Results from the Prospective Neoadjuvant Breast Registry Symphony Trial (NBRST).

PubMed

Beitsch, Peter; Whitworth, Pat; Baron, Paul; Rotkis, Michael C; Mislowsky, Angela M; Richards, Paul D; Murray, Mary K; Pellicane, James V; Dul, Carrie L; Nash, Charles H; Stork-Sloots, Lisette; de Snoo, Femke; Untch, Sarah; Lee, Laura A

2017-09-01

Pertuzumab became a standard part of neoadjuvant therapy for human epidermal growth factor receptor 2-positive (HER2+) breast cancers approximately halfway through Neoadjuvant Breast Registry Symphony Trial (NBRST) enrollment, providing a unique opportunity to determine biologically which clinical HER2+ patients benefit most from dual targeting. As a neoadjuvant phase 4 study, NBRST classifies patients by both conventional and molecular subtyping. Of 308 clinical HER2+ patients enrolled in NBRST between 2011 and 2014 from 62 U.S. institutions, 297 received neoadjuvant chemotherapy (NCT) with HER2-targeted therapy and underwent surgery. This study compared the pathologic complete response (pCR) rate of BluePrint versus clinical subtypes with treatment, specifically differences between trastuzumab (T) treatment and trastuzumab and pertuzumab (T/P) treatment. In this study, 60% of the patients received NCT-T, and 40% received NCT-T/P. The overall pCR rate (ypT0/isN0) was 47%. BluePrint classified 161 tumors (54%) as HER2 type, with a pCR rate of 65%. This was significantly higher than the pCR rate for the 91 HER2+ tumors (31%) classified as luminal (18%) (p = 0.00001) and the 45 tumors (15%) classified as basal (44%) (p = 0.0166). The patients treated with T/P had higher pCR rates than those treated with trastuzumab alone. The difference was most pronounced in the BluePrint luminal patients (8 vs. 31%). The highest pCR was reached by the BluePrint HER2-type patients treated with T/P (76%). The addition of pertuzumab leads to increased pCR rates for all HER2+ patient groups except for the BluePrint basal-type patients. This better response was most pronounced for the BluePrint luminal-type patients.

Cyclophosphamide, bortezomib and dexamethasone (CyBorD) induction for newly diagnosed multiple myeloma: High response rates in a phase II clinical trial

PubMed Central

Reeder, Craig B.; Reece, Donna E.; Kukreti, Vishal; Chen, Christine; Trudel, Suzanne; Hentz, Joseph; Noble, Brie; Pirooz, Nicholas A.; Spong, Jacy E.; Piza, Jesus G.; Zepeda, Victor H. Jimenez; Mikhael, Joseph R.; Leis, Jose F.; Bergsagel, P. Leif; Fonseca, Rafael; Stewart, A. Keith

2009-01-01

We have studied a three drug combination with bortezomib, cyclophosphamide and dexamethasone (CyBorD) on a 28 day cycle in the treatment of newly diagnosed multiple myeloma patients to assess response and toxicity. The primary endpoint of response was evaluated after four cycles. Thirty-three newly diagnosed, symptomatic patients with multiple myeloma received bortezomib 1.3 mg/m2 intravenously on days 1, 4, 8, 11, cyclophosphamide 300 mg/m2 orally days 1, 8, 15, 22 and dexamethasone 40 mg orally days 1-4, 9-12, 17-20 on a 28 day cycle for four cycles. Responses were rapid with a mean 80% decline in the sentinel monoclonal protein at the end of two cycles. The overall intent to treat response rate (≥ partial response) was 88% with 61% ≥VGPR and 39% CR/nCR. For the 28 patients that completed all 4 cycles of therapy the CR/nCR rate was 46% and ≥VGPR rate 71%. All patients undergoing stem cell harvest had a successful collection. Twenty three patients underwent SCT and are evaluable through day 100 with CR/nCR documented in 70% and ≥VGPR in 74%. In conclusion, CyBorD produces a rapid and profound response in patients with newly diagnosed multiple myeloma with manageable toxicity. PMID:19225538

Effect of Microstructure on Creep in Directionally Solidified NiAl-31Cr-3Mo

NASA Technical Reports Server (NTRS)

Whittenberger, J. Daniel; Raj, S. V.; Locci, I. E.

2001-01-01

The 1200 to 1400 K slow strain rate characteristics of the directionally solidified (DS) eutectic Ni-33Al-31Cr-3 Mo have been determined as a function of growth rate. While differences in the light optical level microstructure were observed in alloys grown at rates ranging from 7.6 to 508 mm/h, compression testing indicated that all had essentially the same strength. The exception was Ni-33 Al-31Cr-3Mo DS at 25.4 mm/h which was slightly stronger than the other growth velocities; no microstructural reason could be found for this improvement. Comparison of the approximately 1300 K properties revealed that four different DS NiAl-34(Cr,Mo) alloys have a similar creep resistance which suggests that there is a common, but yet unknown, strengthening mechanism.

Effect of Microstructure on Creep in Directionally Solidified NiAl-31Cr-3Mo

NASA Technical Reports Server (NTRS)

Whittenberger, J. D.; Raj, S. V.; Locci, I. E.

2001-01-01

The 1200 to 1400 K slow strain rate characteristics of the directionally solidified (DS) eutectic Ni-33Al-31Cr-3 Mo have been determined as a function of growth rate. While differences in the light optical level microstructure were observed in alloys grown at rates ranging from 7.6 to 508 mm/h, compression testing indicated that all had essentially the same strength. The exception was Ni-33Al-31Cr-3Mo DS at 25.4 mm/h which was slightly stronger than the other growth velocities; no microstructural reason could be found for this improvement. Comparison of the approx. 1300 K properties revealed that four different DS NiAl-34(Cr,Mo) alloys have a similar creep resistance which suggests that there is a common, but yet unknown, strengthening mechanism.

Hormonal treatment before and after artificial insemination differentially improves fertility in subpopulations of dairy cows during the summer and autumn.

PubMed

Friedman, E; Voet, H; Reznikov, D; Wolfenson, D; Roth, Z

2014-12-01

Reduced conception rate (CR) during the hot summer and subsequent autumn is a well-documented phenomenon. Intensive use of cooling systems can improve summer and autumn reproductive performance, but is unable to increase CR to winter and spring levels. We examined whether combined hormonal treatments--to increase follicular turnover before artificial insemination (AI) and progesterone supplementation post-AI--might improve fertility of cooled cows during the summer and autumn. The experiment was conducted from July to November in 3 commercial herds in Israel and included 707 Holstein cows at 50 to 60 d in milk (DIM). Cows were hormonally treated to induce 2 consecutive 9-d cycles, with GnRH administration followed by PGF2α injection 7 d later, followed by an intravaginal insert containing progesterone on d 5 ± 1 post-AI for 14 d. Both untreated controls (n=376) and treated cows (n=331) were inseminated following estrus, and pregnancy was determined by palpation 42 to 50 d post-AI. First-AI CR data revealed a positive interaction between treatment and cows previously diagnosed with postpartum uterine disease [odds ratio (OR) 2.24]. Interaction between treatment and low body condition score tended to increase the probability of first-AI CR (OR 1.95) and increased pregnancy rate at 90 DIM (OR 2.50) and at 120 DIM (OR 1.77). Low milk production increased the probability of being detected in estrus at the end of synchronization within treated cows (OR 1.67), and interacted with treatment to increase probability of pregnancy at 90 DIM (OR 2.39) relative to control counterparts. It is suggested that when administered with efficient cooling, combined hormonal treatment in specific subgroups of cows, that is, those previously diagnosed with postpartum uterine disease or those with low body condition score or low milk yield might improve fertility during the summer and autumn. Integration of such an approach into reproductive management during the hot seasons might improve treatment efficiency and reduce expenses. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Hexavalent chromium content in stainless steel welding fumes is dependent on the welding process and shield gas type.

PubMed

Keane, Michael; Stone, Samuel; Chen, Bean; Slaven, James; Schwegler-Berry, Diane; Antonini, James

2009-02-01

Occupational exposure to welding fumes is a known health hazard. To isolate elements in stainless steel welding fumes with high potential for adverse health outcomes, fumes were generated using a robotic gas metal arc system, using four shield gases of varying oxygen content. The objective was to measure Cr(VI) concentrations in a broad spectrum of gas metal arc welding processes, and identify processes of exceptionally high or low Cr(VI) content. The gases used were 95% Ar/5% O(2), 98% Ar/2% O(2), 95% Ar/5%CO(2), and 75% He/25% Ar. The welder was operated in axial spray mode (Ar/O(2), Ar/CO(2)), short-circuit (SC) mode (Ar/CO(2) low voltage and He/Ar), and pulsed axial-spray mode (98% Ar/2% O(2)). Results indicate large differences in Cr(VI) in the fumes, with Ar/O(2) (Pulsed)>Ar/O(2)>Ar/CO(2)>Ar/CO(2) (SC)>He/Ar; values were 3000+/-300, 2800+/-85, 2600+/-120, 1400+/-190, and 320+/-290 ppm respectively (means +/- standard errors for 2 runs and 3 replicates per run). Respective rates of Cr(VI) generation were 1.5, 3.2, 4.4, 1.3, and 0.46 microg/min; generation rates were also calculated in terms of microg Cr(VI) per metre of wire used. The generation rates of Cr(VI) increased with increasing O(3) concentrations. Particle size measurements indicated similar distributions, but somewhat higher >0.6 microm fractions for the short-circuit mode samples. Fumes were also sampled into 2 selected size ranges, a microspatter fraction (>or=0.6 microm) and a fine (<0.6 microm) fraction; analysis indicated that Cr(VI) is primarily associated with particles <0.6 microm. The conclusion of the study is that Cr(VI) concentrations vary significantly with welding type and shield gas type, and this presents an opportunity to tailor welding practices to lessen Cr(VI) exposures in workplaces by selecting low Cr(VI)-generating processes. Short-circuit processes generated less Cr(VI) than axial-spray methods, and inert gas shielding gave lower Cr(VI) content than shielding with active gases. A short circuit He/Ar shielded process and a pulsed axial spray Ar/O(2) process were both identified as having substantially lower Cr(VI) generation rates per unit of wire used relative to the other processes studied.

Education of Physicians and Implementation of a Formal Referral System Can Improve Cardiac Rehabilitation Referral and Participation Rates after Percutaneous Coronary Intervention.

PubMed

Dahhan, Ali; Maddox, William R; Krothapalli, Siva; Farmer, Matthew; Shah, Amit; Ford, Benjamin; Rhodes, Marc; Matthews, Laurie; Barnes, Vernon A; Sharma, Gyanendra K

2015-08-01

Cardiac rehabilitation (CR) is an effective preventive measure that remains underutilised in the United States. The study aimed to determine the CR referral rate (RR) after percutaneous coronary intervention (PCI) at an academic tertiary care centre, identify barriers to referral, and evaluate awareness of CR benefits and indications (CRBI) among cardiologists. Subsequently, it aimed to evaluate if an intervention consisting of physicians' education about CRBI and implementation of a formal CR referral system could improve RR and consequently participation rate (PR). Data were retrospectively collected for all consecutive patients who underwent PCI over 12 months. Referral rate was determined and variables were compared for differences between referred and non-referred patients. A questionnaire was distributed among the physicians in the Division of Cardiology to assess awareness of CRBI and referral practice patterns. After implementation of the intervention, data were collected retrospectively for consecutive patients who underwent PCI in the following six months. Referral rate and changes in PRs were determined. Prior to the intervention, RR was 17.6%. Different barriers were identified, but the questionnaire revealed lack of physicians' awareness of CRBI and inconsistent referral patterns. After the intervention, RR increased to 88.96% (Odds Ratio 37.73, 95% CI 21.34-66.70, p<0.0001) and PR increased by 32.8% to reach 26%. Personal endorsement of CRBI by cardiologists known to patients increased CR program graduation rate by 35%. Cardiologists' awareness of CRBI increases CR RR and their personal endorsement improves PR and compliance. Education of providers and implementation of a formal referral system can improve RR and PR. Published by Elsevier B.V.

Hot Corrosion Behavior of Bare, Cr3C2-(NiCr) and Cr3C2-(NiCr) + 0.2wt.%Zr Coated SuperNi 718 at 900 °C

NASA Astrophysics Data System (ADS)

Mudgal, Deepa; Singh, Surendra; Prakash, Satya

2015-01-01

Corrosion in incinerators, power plants, and chemical industries are frequently encountered due to the presence of salts containing sodium, sulphur, and chlorine. To obviate this problem, bare and coated alloys were tested under environments simulating the conditions present inside incinerators and power plants. 0.2 wt.% zirconium powder was incorporated in the Cr3C2-(NiCr) coating powder. The original powder and Zr containing powder was sprayed on Superni 718 alloy by D-gun technique. The bare and coated alloys were tested under Na2SO4 + K2SO4 + NaCl + KCl and Na2SO4 + NaCl environment. The corrosion rate of specimens was monitored using weight change measurements. Characterization of the corrosion products has been done using FE-SEM/EDS and XRD techniques. Bare and coated alloys showed very good corrosion resistance under given molten salt environments. Addition of 0.2wt.%Zr in Cr3C2-25%(NiCr) coating further greatly reduced the oxidation rate as well as improved the adherence of oxide scale to the coating surface during the time of corrosion.

Preconception Maternal Iodine Status Is Positively Associated with IQ but Not with Measures of Executive Function in Childhood.

PubMed

Robinson, Sian M; Crozier, Sarah R; Miles, Elizabeth A; Gale, Catharine R; Calder, Philip C; Cooper, Cyrus; Inskip, Hazel M; Godfrey, Keith M

2018-05-15

Adverse effects of severe maternal iodine deficiency in pregnancy on fetal brain development are well-established, but the effects of milder deficiency are uncertain. Most studies examine iodine status in pregnancy; less is known about iodine nutrition before conception. We examined relations between maternal preconception iodine status and offspring cognitive function, within a prospective mother-offspring cohort. Maternal iodine status was assessed through the use of the ratio of iodine:creatinine concentrations (I/Cr) in spot urine samples [median (IQR) period before conception 3.3 y (2.2-4.7 y)]. Childhood cognitive function was assessed at age 6-7 y. Full-scale IQ was assessed via the Wechsler Abbreviated Scale of Intelligence, and executive function through the use of tests from the Cambridge Neuropsychological Test Automated Battery (CANTAB). Analyses (n = 654 mother-child dyads) were adjusted for potential confounders including maternal intelligence, education, and breastfeeding duration. The median (IQR) urinary iodine concentration was 108.4 µg/L (62.2-167.8 µg/L) and the I/Cr ratio 114 µg/g (76-164 µg/g). The preconception I/Cr ratio was positively associated with child IQ, before and after adjustment for potential confounding influences [β = 0.13 (95% CI: 0.04, 0.21)/SD, P = 0.003]. 8.9% of women had a preconception urinary I/Cr ratio <50 µg/g; compared with those with an I/Cr ratio ≥150 µg/g, the IQ of their offspring was 0.49 (95% CI: 0.79, 0.18) SD lower. There were no associations with the executive function outcomes assessed via CANTAB, before or after adjustment for confounders. The positive association between iodine status before conception and child IQ provides some support for demonstrated links between low maternal iodine status in pregnancy and poorer cognitive function reported in other studies. However, given the negative effects on school performance previously observed in children born to iodine-deficient mothers, the lack of associations with measures of executive function in the present study was unexpected. Further data are needed to establish the public health importance of low preconception iodine status.

Screen-detected versus interval cancers: Effect of imaging modality and breast density in the Flemish Breast Cancer Screening Programme.

PubMed

Timmermans, Lore; Bleyen, Luc; Bacher, Klaus; Van Herck, Koen; Lemmens, Kim; Van Ongeval, Chantal; Van Steen, Andre; Martens, Patrick; De Brabander, Isabel; Goossens, Mathieu; Thierens, Hubert

2017-09-01

To investigate if direct radiography (DR) performs better than screen-film mammography (SF) and computed radiography (CR) in dense breasts in a decentralized organised Breast Cancer Screening Programme. To this end, screen-detected versus interval cancers were studied in different BI-RADS density classes for these imaging modalities. The study cohort consisted of 351,532 women who participated in the Flemish Breast Cancer Screening Programme in 2009 and 2010. Information on screen-detected and interval cancers, breast density scores of radiologist second readers, and imaging modality was obtained by linkage of the databases of the Centre of Cancer Detection and the Belgian Cancer Registry. Overall, 67% of occurring breast cancers are screen detected and 33% are interval cancers, with DR performing better than SF and CR. The interval cancer rate increases gradually with breast density, regardless of modality. In the high-density class, the interval cancer rate exceeds the cancer detection rate for SF and CR, but not for DR. DR is superior to SF and CR with respect to cancer detection rates for high-density breasts. To reduce the high interval cancer rate in dense breasts, use of an additional imaging technique in screening can be taken into consideration. • Interval cancer rate increases gradually with breast density, regardless of modality. • Cancer detection rate in high-density breasts is superior in DR. • IC rate exceeds CDR for SF and CR in high-density breasts. • DR performs better in high-density breasts for third readings and false-positives.

Pathway level alterations rather than mutations in single genes predict response to HER2-targeted therapies in the neo-ALTTO trial.

PubMed

Shi, W; Jiang, T; Nuciforo, P; Hatzis, C; Holmes, E; Harbeck, N; Sotiriou, C; Peña, L; Loi, S; Rosa, D D; Chia, S; Wardley, A; Ueno, T; Rossari, J; Eidtmann, H; Armour, A; Piccart-Gebhart, M; Rimm, D L; Baselga, J; Pusztai, L

2017-01-01

We performed whole-exome sequencing of pretreatment biopsies and examined whether genome-wide metrics of overall mutational load, clonal heterogeneity or alterations at variant, gene, and pathway levels are associated with treatment response and survival. Two hundred and three biopsies from the NeoALTTO trial were analyzed. Mutations were called with MuTect, and Strelka, using pooled normal DNA. Associations between DNA alterations and outcome were evaluated by logistic and Cox-proportional hazards regression. There were no recurrent single gene mutations significantly associated with pathologic complete response (pCR), except PIK3CA [odds ratio (OR) = 0.42, P = 0.0185]. Mutations in 33 of 714 pathways were significantly associated with response, but different genes were affected in different individuals. PIK3CA was present in 23 of these pathways defining a ‘trastuzumab resistance-network’ of 459 genes. Cases with mutations in this network had low pCR rates to trastuzumab (2/50, 4%) compared with cases with no mutations (9/16, 56%), OR = 0.035; P < 0.001. Mutations in the ‘Regulation of RhoA activity’ pathway were associated with higher pCR rate to lapatinib (OR = 14.8, adjusted P = 0.001), lapatinib + trastuzumab (OR = 3.0, adjusted P = 0.09), and all arms combined (OR = 3.77, adjusted P = 0.02). Patients (n = 124) with mutations in the trastuzumab resistance network but intact RhoA pathway had 2% (1/41) pCR rate with trastuzumab alone (OR = 0.026, P = 0.001) but adding lapatinib increased pCR rate to 45% (17/38, OR = 1.68, P = 0.3). Patients (n = 46) who had no mutations in either gene set had 6% pCR rate (1/15) with lapatinib, but had the highest pCR rate, 52% (8/15) with trastuzumab alone. Mutations in the RhoA pathway are associated with pCR to lapatinib and mutations in a PIK3CA-related network are associated with resistance to trastuzumab. The combined mutation status of these two pathways could define patients with very low response rate to trastuzumab alone that can be augmented by adding lapatinib or substituting trastuzumab with lapatinib.

Reduction of Cr(VI) under acidic conditions by the facultative Fe(III)-reducing bacterium Acidiphilium cryptum

DOE Office of Scientific and Technical Information (OSTI.GOV)

David E. Cummings; Scott Fendorf; Rajesh K. Sani

2007-01-01

The potential for biological reduction of Cr(VI) under acidic conditions was evaluated with the acidophilic, facultatively metal-reducing bacterium Acidiphilium cryptum strain JF-5 to explore the role of acidophilic microorganisms in the Cr cycle in low-pH environments. An anaerobic suspension of washed A. cryptum cells rapidly reduced 50 M Cr(VI) at pH 3.2; biological reduction was detected from pH 1.7-4.7. The reduction product, confirmed by XANES analysis, was entirely Cr(III) that was associated predominantly with the cell biomass (70-80%) with the residual residing in the aqueous phase. Reduction of Cr(VI) showed a pH optimum similar to that for growth and wasmore » inhibited by 5 mM HgCl2, suggesting that the reaction was enzyme-mediated. Introduction of O2 into the reaction medium slowed the reduction rate only slightly, whereas soluble Fe(III) (as ferric sulfate) increased the rate dramatically, presumably by the shuttling of electrons from bioreduced Fe(II) to Cr(VI) in a coupled biotic-abiotic cycle. Starved cells could not reduce Cr(VI) when provided as sole electron acceptor, indicating that Cr(VI) reduction is not an energy-conserving process in A. cryptum. We speculate, rather, that Cr(VI) reduction is used here as a detoxification mechanism.« less

Pratt & Whitney/Boeing Engine Validation of Noise Reduction Concepts Final Report for NASA Contract NAS3-97144, Phase 2

NASA Technical Reports Server (NTRS)

Bock, Larry A.; Hauser, Joseph E.; Mathews, Douglas C.; Topol, David A.; Bielak, Gerald W.; Lan, Justin H.; Premo, John W.

2014-01-01

This report presents results of the work completed in Phase 2 of the Engine Validation of Noise Reduction Concepts (EVNRC) contract. The purpose of the program is to validate, through engine testing, advanced noise reduction concepts aimed at reducing engine noise up to 6 EPNdB and improving nacelle suppression by 50 percent relative to 1992 technology. Phase 1 of the program is completed and is summarized in NASA/CR-2014-218088.

Uptake and loss kinetics of Cd, Cr and Zn in the bivalves Potamocorbula amurensis and Macoma balthica: Effects of size and salinity

USGS Publications Warehouse

Lee, B.-G.; Wallace, W.G.; Luoma, S.N.

1998-01-01

Radiotracer studies were employed to quantitatively compare the biokinetics of uptake from the dissolved phase (influx rates) and loss (efflux) between 2 bivalves, Potamocorbula amurensis and Macoma balthica, and among the metals Cd, Cr and Zn. Effects of salinity on influx rate were evaluated in these 2 highly euryhaline species as were effects of animal size on uptake and loss. Metal speciation and biological attributes interacted to differentiate bioaccumulation processes among metals and between species. Influx rates of the 3 metals (??g g-1 [dry wt] d-1) increased linearly with dissolved metal concentrations. Influx rates of Zn in both clams were 3 to 4x those for Cd and 15x those for Cr. However, influx on the basis of free ion activities would be faster for Cd than for Zn. Relative influx rates among the metals were similar in the 2 bivalves. But, absolute influx rates of all 3 metals were 4 to 5x greater in P. amurensis than in M. balthica, probably because of differences in biological attributes (i.e. clearance rate or gill surface area). As salinity was reduced from 30 to 5 psu, the influx rate of Cd for P. amurensis increased 4-fold and that for M. balthica increased 6-fold, consistent with expected changes in speciation. However the influx rates of Cr in both clams also increased 2.4-fold over the same range, indicating a biological contribution to the salinity effect. Influx rates of Zn were not significantly affected by salinity. Weight specific metal influx rates (??g g-1 [dry wt] d-1) were negatively correlated with the tissue dry weight of the clams, but most rate constants determining physiological turnover of assimilated metals were not affected by clam size. The exception was the rate constant for Cd loss, which resulted in faster turnover in large M. balthica than in smaller clams. The rate constant of loss for P. amurensis increased in the order of Cd (0.011 d-1) < Zn (0.027 d-1) < Cr (0.048 d-1). This was different from the hierarchy of rate constants for M. balthica: Zn (0.012 d-1) < Cd (0.018 d-1) < Cr (0.024 d-1).

Low Diversity in the Mitogenome of Sperm Whales Revealed by Next-Generation Sequencing

PubMed Central

Alexander, Alana; Steel, Debbie; Slikas, Beth; Hoekzema, Kendra; Carraher, Colm; Parks, Matthew; Cronn, Richard; Baker, C. Scott

2013-01-01

Large population sizes and global distributions generally associate with high mitochondrial DNA control region (CR) diversity. The sperm whale (Physeter macrocephalus) is an exception, showing low CR diversity relative to other cetaceans; however, diversity levels throughout the remainder of the sperm whale mitogenome are unknown. We sequenced 20 mitogenomes from 17 sperm whales representative of worldwide diversity using Next Generation Sequencing (NGS) technologies (Illumina GAIIx, Roche 454 GS Junior). Resequencing of three individuals with both NGS platforms and partial Sanger sequencing showed low discrepancy rates (454-Illumina: 0.0071%; Sanger-Illumina: 0.0034%; and Sanger-454: 0.0023%) confirming suitability of both NGS platforms for investigating low mitogenomic diversity. Using the 17 sperm whale mitogenomes in a phylogenetic reconstruction with 41 other species, including 11 new dolphin mitogenomes, we tested two hypotheses for the low CR diversity. First, the hypothesis that CR-specific constraints have reduced diversity solely in the CR was rejected as diversity was low throughout the mitogenome, not just in the CR (overall diversity π = 0.096%; protein-coding 3rd codon = 0.22%; CR = 0.35%), and CR phylogenetic signal was congruent with protein-coding regions. Second, the hypothesis that slow substitution rates reduced diversity throughout the sperm whale mitogenome was rejected as sperm whales had significantly higher rates of CR evolution and no evidence of slow coding region evolution relative to other cetaceans. The estimated time to most recent common ancestor for sperm whale mitogenomes was 72,800 to 137,400 years ago (95% highest probability density interval), consistent with previous hypotheses of a bottleneck or selective sweep as likely causes of low mitogenome diversity. PMID:23254394

Low diversity in the mitogenome of sperm whales revealed by next-generation sequencing.

PubMed

Alexander, Alana; Steel, Debbie; Slikas, Beth; Hoekzema, Kendra; Carraher, Colm; Parks, Matthew; Cronn, Richard; Baker, C Scott

2013-01-01

Large population sizes and global distributions generally associate with high mitochondrial DNA control region (CR) diversity. The sperm whale (Physeter macrocephalus) is an exception, showing low CR diversity relative to other cetaceans; however, diversity levels throughout the remainder of the sperm whale mitogenome are unknown. We sequenced 20 mitogenomes from 17 sperm whales representative of worldwide diversity using Next Generation Sequencing (NGS) technologies (Illumina GAIIx, Roche 454 GS Junior). Resequencing of three individuals with both NGS platforms and partial Sanger sequencing showed low discrepancy rates (454-Illumina: 0.0071%; Sanger-Illumina: 0.0034%; and Sanger-454: 0.0023%) confirming suitability of both NGS platforms for investigating low mitogenomic diversity. Using the 17 sperm whale mitogenomes in a phylogenetic reconstruction with 41 other species, including 11 new dolphin mitogenomes, we tested two hypotheses for the low CR diversity. First, the hypothesis that CR-specific constraints have reduced diversity solely in the CR was rejected as diversity was low throughout the mitogenome, not just in the CR (overall diversity π = 0.096%; protein-coding 3rd codon = 0.22%; CR = 0.35%), and CR phylogenetic signal was congruent with protein-coding regions. Second, the hypothesis that slow substitution rates reduced diversity throughout the sperm whale mitogenome was rejected as sperm whales had significantly higher rates of CR evolution and no evidence of slow coding region evolution relative to other cetaceans. The estimated time to most recent common ancestor for sperm whale mitogenomes was 72,800 to 137,400 years ago (95% highest probability density interval), consistent with previous hypotheses of a bottleneck or selective sweep as likely causes of low mitogenome diversity.

A revised model of ex-vivo reduction of hexavalent chromium in human and rodent gastric juices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlosser, Paul M., E-mail: schlosser.paul@epa.gov; Sasso, Alan F.

Chronic oral exposure to hexavalent chromium (Cr-VI) in drinking water has been shown to induce tumors in the mouse gastrointestinal (GI) tract and rat oral cavity. The same is not true for trivalent chromium (Cr-III). Thus reduction of Cr-VI to Cr-III in gastric juices is considered a protective mechanism, and it has been suggested that the difference between the rate of reduction among mice, rats, and humans could explain or predict differences in sensitivity to Cr-VI. We evaluated previously published models of gastric reduction and believe that they do not fully describe the data on reduction as a function ofmore » Cr-VI concentration, time, and (in humans) pH. The previous models are parsimonious in assuming only a single reducing agent in rodents and describing pH-dependence using a simple function. We present a revised model that assumes three pools of reducing agents in rats and mice with pH-dependence based on known speciation chemistry. While the revised model uses more fitted parameters than the original model, they are adequately identifiable given the available data, and the fit of the revised model to the full range of data is shown to be significantly improved. Hence the revised model should provide better predictions of Cr-VI reduction when integrated into a corresponding PBPK model. - Highlights: • Hexavalent chromium (Cr-VI) reduction in gastric juices is a key detoxifying step. • pH-dependent Cr-VI reduction rates are explained using known chemical speciation. • Reduction in rodents appears to involve multiple pools of electron donors. • Reduction appears to continue after 60 min, although more slowly than initial rates.« less

Collaborative Research and Development (CR&D) III Task Order 0090: Image Processing Framework: From Acquisition and Analysis to Archival Storage

DTIC Science & Technology

2013-05-01

contract or a PhD di sse rtation typically are a " proo f- of-concept" code base that can onl y read a single set of inputs and are not designed ...AFRL-RX-WP-TR-2013-0210 COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) III Task Order 0090: Image Processing Framework: From...public release; distribution unlimited. See additional restrictions described on inside pages. STINFO COPY AIR FORCE RESEARCH LABORATORY

A task-invariant cognitive reserve network.

PubMed

Stern, Yaakov; Gazes, Yunglin; Razlighi, Qolomreza; Steffener, Jason; Habeck, Christian

2018-05-14

The concept of cognitive reserve (CR) can explain individual differences in susceptibility to cognitive or functional impairment in the presence of age or disease-related brain changes. Epidemiologic evidence indicates that CR helps maintain performance in the face of pathology across multiple cognitive domains. We therefore tried to identify a single, "task-invariant" CR network that is active during the performance of many disparate tasks. In imaging data acquired from 255 individuals age 20-80 while performing 12 different cognitive tasks, we used an iterative approach to derive a multivariate network that was expressed during the performance of all tasks, and whose degree of expression correlated with IQ, a proxy for CR. When applied to held out data or forward applied to fMRI data from an entirely different activation task, network expression correlated with IQ. Expression of the CR pattern accounted for additional variance in fluid reasoning performance over and above the influence of cortical thickness, and also moderated between cortical thickness and reasoning performance, consistent with the behavior of a CR network. The identification of a task-invariant CR network supports the idea that life experiences may result in brain processing differences that might provide reserve against age- or disease-related changes across multiple tasks. Copyright © 2018. Published by Elsevier Inc.

Vacuum plasma coatings for turbine blades

NASA Technical Reports Server (NTRS)

Holmes, R. R.

1985-01-01

Turbine blades, vacuum plasma spray coated with NiCrAlY, CoCrAlY or NiCrAlY/Cr2O3, were evaluated and rated superior to standard space shuttle main engine (SSME) coated blades. Ratings were based primarily on 25 thermal cycles in the MSFC Burner Rig Tester, cycling between 1700 F (gaseous H2) and -423 F (liquid H2). These tests showed no spalling on blades with improved vacuum plasma coatings, while standard blades spalled. Thermal barrier coatings of ZrO2, while superior to standard coatings, lacked the overall performance desired. Fatigue and tensile specimens, machined from MAR-M-246(Hf) test bars identical to the blades were vacuum plasma spray coated, diffusion bond treated, and tested to qualify the vacuum plasma spray process for flight hardware testing and application. While NiCrAlY/Cr2O3 offers significant improvement over standard coatings in durability and thermal protection, studies continue with an objective to develop coatings offering even greater improvements.

Metabolic and Behavioral Compensations in Response to Caloric Restriction: Implications for the Maintenance of Weight Loss

PubMed Central

Redman, Leanne M.; Heilbronn, Leonie K.; Martin, Corby K.; de Jonge, Lilian; Williamson, Donald A.; Delany, James P.; Ravussin, Eric

2009-01-01

Background Metabolic and behavioral adaptations to caloric restriction (CR) in free-living conditions have not yet been objectively measured. Methodology and Principal Findings Forty-eight (36.8±1.0 y), overweight (BMI 27.8±0.7 kg/m2) participants were randomized to four groups for 6-months; Control: energy intake at 100% of energy requirements; CR: 25% calorie restriction; CR+EX: 12.5% CR plus 12.5% increase in energy expenditure by structured exercise; LCD: low calorie diet (890 kcal/d) until 15% weight reduction followed by weight maintenance. Body composition (DXA) and total daily energy expenditure (TDEE) over 14-days by doubly labeled water (DLW) and activity related energy activity (AREE) were measured after 3 (M3) and 6 (M6) months of intervention. Weight changes at M6 were −1.0±1.1% (Control), −10.4±0.9% (CR), −10.0±0.8% (CR+EX) and −13.9±0.8% (LCD). At M3, absolute TDEE was significantly reduced in CR (−454±76 kcal/d) and LCD (−633±66 kcal/d) but not in CR+EX or controls. At M6 the reduction in TDEE remained lower than baseline in CR (−316±118 kcal/d) and LCD (−389±124 kcal/d) but reached significance only when CR and LCD were combined (−351±83 kcal/d). In response to caloric restriction (CR/LCD combined), TDEE adjusted for body composition, was significantly lower by −431±51 and −240±83 kcal/d at M3 and M6, respectively, indicating a metabolic adaptation. Likewise, physical activity (TDEE adjusted for sleeping metabolic rate) was significantly reduced from baseline at both time points. For control and CR+EX, adjusted TDEE (body composition or sleeping metabolic rate) was not changed at either M3 or M6. Conclusions For the first time we show that in free-living conditions, CR results in a metabolic adaptation and a behavioral adaptation with decreased physical activity levels. These data also suggest potential mechanisms by which CR causes large inter-individual variability in the rates of weight loss and how exercise may influence weight loss and weight loss maintenance. Trial Registration ClinicalTrials.gov NCT00099151 PMID:19198647

Modeling Cr-to-Tm and Cr-to-Tm-to-Ho energy transfer in YAG crystals

NASA Technical Reports Server (NTRS)

Swetits, John J.

1991-01-01

A systematic analysis of energy transfer processes in crystals of YAG doped with varying concentrations of Cr and Tm is described. Both spectral measurements and measurements of the temporal response to pulsed excitation are used to give independent determinations of the microscopic interaction parameter for Cr to Tm transfer. The different factors in influencing the temperature dependence of the Cr to Tm transfer are discussed. The dependence of the Tm cross-relaxation rate on Tm concentration is determined.

Crystal Structure and Energy Transfer in Double-Complex Salts Composed of Tris(2,2'-bipyridine)ruthenium(II) or Tris(2,2'-bipyridine)osmium(II) and Hexacyanochromate(III).

PubMed

Otsuka, Takuhiro; Takahashi, Naoto; Fujigasaki, Naoki; Sekine, Akiko; Ohashi, Yuji; Kaizu, Youkoh

1999-03-22

In crystals of double-complex salts [M(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O (M(2+) = Ru(2+), Os(2+); bpy = 2,2'-bipyridine), luminescence from (3)CT state of [M(bpy)(3)](2+) is partially quenched by [Cr(CN)(6)](3)(-) at 77 K and room temperature (RT). This quenching is attributed to intermolecular excitation energy transfer from the (3)CT state of [M(bpy)(3)](2+) to the (2)E(g) state of [Cr(CN)(6)](3)(-). Crystal structure and crystal parameters of [Os(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O: monoclinic, C2, a = 22.384(4) Å, b = 13.827(4) Å, c = 22.186(3) Å, beta = 90.70(2) degrees, V = 6866(2) Å(3), Z = 4, R = 0.0789, R(w) = 0.1932: are almost the same as those of [Ru(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O: monoclinic, C2, a = 22.414(2) Å, b = 13.7686(15) Å, c = 22.207(2) Å, beta = 90.713(8) degrees, V = 6852.9(12) Å(3), Z = 4, R = 0.0554, R(w) = 0.1679. Moreover, these double complex salts have the same distance and relative orientation between donor and acceptor. The rate of intermolecular energy transfer from [M(bpy)(3)](2+) to [Cr(CN)(6)](3)(-) was evaluated by the decay time of luminescence from (3)CT state of [M(bpy)(3)](2+) in single- and double-complex salts. The rate of energy transfer in [Os(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O (4.9 x 10(7) s(-)(1)) is about eight times larger than that in [Ru(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O (6.0 x 10(6) s(-)(1)) at 77 K. The difference of energy transfer rate is brought about by only the spectral overlap between the normalized luminescence spectrum from the (3)CT state of donor ([M(bpy)(3)](2+)) and the normalized excitation spectrum of the (2)E(g) state of acceptor ([Cr(CN)(6)](3)(-)) in the salts. Decay rates of the (3)CT state in [M(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O were measured as a function of temperature. A large enhancement of a decay rate from the (3)CT state was obtained for [Ru(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O as the temperature was increased. This result implies that an additional path from the (3)CT state of [Ru(bpy)(3)](2+) to the (2)T(2g) state of [Cr(CN)(6)](3)(-) would be opened for energy transfer with a rise in temperature in [Ru(bpy)(3)](2)[Cr(CN)(6)]Cl.8H(2)O.

Hybrid Resource Allocation Scheme with Proportional Fairness in OFDMA-Based Cognitive Radio Systems

NASA Astrophysics Data System (ADS)

Li, Li; Xu, Changqing; Fan, Pingzhi; He, Jian

In this paper, the resource allocation problem for proportional fairness in hybrid Cognitive Radio (CR) systems is studied. In OFDMA-based CR systems, traditional resource allocation algorithms can not guarantee proportional rates among CR users (CRU) in each OFDM symbol because the number of available subchannels might be smaller than that of CRUs in some OFDM symbols. To deal with this time-varying nature of available spectrum resource, a hybrid CR scheme in which CRUs are allowed to use subchannels in both spectrum holes and primary users (PU) bands is adopted and a resource allocation algorithm is proposed to guarantee proportional rates among CRUs with no undue interference to PUs.

Differential Isotopic Fractionation during Cr(VI) Reduction by an Aquifer-Derived Bacterium under Aerobic versus Denitrifying Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, R.; Qin, L.; Brown, S. T.

2012-01-27

We studied Cr isotopic fractionation during Cr(VI) reduction by Pseudomonas stutzeri strain RCH2. Finally, despite the fact that strain RCH2 reduces Cr(VI) cometabolically under both aerobic and denitrifying conditions and at similar specific rates, fractionation was markedly different under these two conditions (ε was ~2‰ aerobically and ~0.4‰ under denitrifying conditions).

Short-term clinical outcomes of laser supported periodontal treatment concept using Er,Cr:YSGG (2780nm) and diode (940 nm): a pilot study

NASA Astrophysics Data System (ADS)

Odor, Alin A.; Violant, Deborah; Badea, Victoria; Gutknecht, Norbert

2016-03-01

Backgrounds: Er,Cr:YSGG (2780nm) and diode (940 nm) lasers can be used adjacent to the conventional periodontal treatment as minimally invasive non-surgical devices. Aim: To describe the short-term clinical outcomes by combining Er,Cr:YSGG (2780nm) and diode 940 nm lasers in non-surgical periodontal treatment. Materials and methods: A total of 10 patients with periodontal disease (mild, moderate, severe) - 233 teeth and 677 periodontal pockets ranging from 4 mm to 12 mm - were treated with Er,Cr:YSGG (2780nm) and diode (940 nm) lasers in adjunct to manual and piezoelectric scaling and root planning (SRP). Periodontal parameters such as mean probing depth (PD), mean clinical attachment level (CAL) and mean bleeding on probing (BOP) were evaluated at baseline and 6 months after the laser treatment using an electronic periodontal chart. Results: At baseline, the mean PD was 4.06 ± 1.06 mm, mean CAL was 4.56 ± 1.43 mm, and mean BOP was 43.8 ± 23.84 %. At 6 months after the laser supported periodontal treatments the mean PD was 2.6 ± 0.58 mm (p <0.001), mean CAL was 3.36 ± 1.24 mm (p <0.001) and mean BOP was 17 ± 9.34 % (p <0.001). Also 3 patients showed radiographic signs of bone regeneration. Conclusion: The combination of two laser wavelengths in adjunct to SRP offers significant improvements of periodontal clinical parameters such as PD, CAL and BOP. Keywords: Laser supported periodontal treatment concept, Er,Cr:YSGG and diode 940nm lasers, Scaling and root planning, Minimally invasive non-surgical device

Effectiveness and safety of nitrofurantoin in outpatient male veterans.

PubMed

Ingalsbe, Michelle L; Wojciechowski, Amy L; Smith, Kelly A; Mergenhagen, Kari A

2015-08-01

The aim of the study was to assess both the safety and the effectiveness of nitrofurantoin in male veterans treated for urinary tract infections (UTIs) with varying degrees of renal impairment in the outpatient setting. Nitrofurantoin is an important oral option for treating UTIs given increasing resistance to commonly used agents. Nitrofurantoin is currently contraindicated in patients with a creatinine clearance (CrCl) of < 60 ml/min, but the reason for this threshold has not been well documented. Data were collected through a retrospective chart review from January 2004 to July 2013 of men who had received nitrofurantoin. Bivariate analyses followed by multivariate analyses were performed between patients experiencing clinical cure and those who did not, to determine factors significantly impacting effectiveness. The Gram stain of the organism causing the UTI and CrCl were significant factors impacting effectiveness. For every 1 ml/min increase in CrCl, the odds of clinical cure increased by 1.3%. Patients with Gram-negative UTIs predictably had 80% cure rates with CrCl around 60 ml/min. Patients with Gram-positive UTIs required higher CrCl, nearing 100 ml/min, to establish an 80% cure rate. Adverse effects did not vary with CrCl. The odds of clinical cure varied with CrCl and with the type of organism causing the UTI, while adverse events did not differ based on renal function. A minimum CrCl of 60 ml/min is suggested for men to achieve an 80% cure rate for UTIs with the most common urinary pathogens.

A pharmacokinetic and pharmacodynamic comparison of immediate-release metoprolol and extended-release metoprolol CR/XL in patients with suspected acute myocardial infarction: a randomized, open-label study.

PubMed

Karlson, Björn W; Dellborg, Mikael; Gullestad, Lars; Aberg, Jan; Sugg, Jennifer; Herlitz, Johan

2014-01-01

Previous metoprolol studies in myocardial infarction patients were performed with immediate-release (IR) metoprolol. This study aims to evaluate if extended-release metoprolol CR/XL once daily gives a similar β-blockade over 24 h compared to multiple dosing of metoprolol IR. After 2 days of routine metoprolol treatment, 27 patients with suspected acute myocardial infarction were randomized to open-label treatment with metoprolol IR (50 mg four times daily or 100 mg twice daily) or metoprolol CR/XL 200 mg once daily for 3 days. Metoprolol CR/XL 200 mg once daily gave more pronounced suppression of peak heart rate, with lower peak and less variation in peak to trough plasma levels. There were no differences in AUC between the CR/XL and IR formulations, although the trough plasma metoprolol levels were comparable for metoprolol CR/XL 200 mg once daily and metoprolol IR 50 mg four times daily, but lower for metoprolol IR 100 mg twice daily. Both treatments were well tolerated. Metoprolol CR/XL 200 mg once daily showed lower peak and less variation in peak to trough plasma levels compared to multiple dosing of metoprolol IR with the same AUC. This was accompanied by a more uniform β-blockade over time, which was reflected by heart rate, and a more pronounced suppression of peak heart rate with similar tolerability. This suggests metoprolol CR/XL may be used as an alternative to metoprolol IR in patients with myocardial infarction. © 2013 S. Karger AG, Basel.

Cognitive reserve and long-term change in cognition in aging and preclinical Alzheimer's disease.

PubMed

Soldan, Anja; Pettigrew, Corinne; Cai, Qing; Wang, Jiangxia; Wang, Mei-Cheng; Moghekar, Abhay; Miller, Michael I; Albert, Marilyn

2017-12-01

We examined if baseline levels of cognitive reserve (CR) and of Alzheimer's disease (AD) biomarkers modify the rate of change in cognition among individuals with normal cognition at baseline (n = 303, mean baseline age = 57 years, mean follow-up = 12 years); 66 participants subsequently developed mild cognitive impairment (MCI) or dementia due to AD. CR was indexed by years of education, reading, and vocabulary measures. AD biomarkers were measured with a composite score composed of measures of amyloid, phosphorylated tau, and neurodegeneration. Higher CR scores were associated with better cognitive performance but did not modify the rate of change in cognition among those who remained cognitively normal, nor among those who progressed to MCI before symptom onset, independent of baseline biomarker levels. However, higher CR scores were associated with faster cognitive decline after symptom onset of MCI. These results suggest that the mechanism by which CR mediates the relationship between pathology and cognitive function is by delaying the onset of symptoms rather than reducing the rate of cognitive decline. Copyright © 2017 Elsevier Inc. All rights reserved.

Atmosphere

NASA Astrophysics Data System (ADS)

Ghosh, D.; Mitra, S. K.

2014-05-01

This paper investigates the high-temperature corrosion behavior of microstructurally different regions of the weldment of 9 Cr-1 Mo steel used in thermal power plant boiler in SO2 + O2 environment. The weldment is produced by tungsten inert gas welding method, and the different regions of the weldment (weld metal, heat-affected zone, and base metal) are exposed in SO2 + O2 (ratio 2:1) environment at 973 K for 120 h. The reaction kinetics and corrosion growth rate of different regions of weldment in isothermal condition are evaluated. The post corroded scales of the different specimens are studied in SEM, EDS, and XRD. The results indicate that the weld metal shows higher corrosion rate followed by HAZ and base metal. The higher rate of corrosion of weldmetal is mainly attributed to the least protective inner scale of Cr2O3 with minimum Cr Content. This is due to the formation of delta ferrite, which leads to the precipitation of the Cr-based secondary phases and depletes the free Cr from the matrix. The thermal cycles during welding at high temperature are favorable for the formation of delta ferrite. On the other hand, in absence of delta ferrite, the base metal and HAZ regions of the weldment show lower corrosion rate than weld metal. The difference in corrosion rate in the three regions of the weldment is supplemented by post-corroded scale characterizations.

Multiscale Multiphysics Developments for Accident Tolerant Fuel Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamble, K. A.; Hales, J. D.; Yu, J.

2015-09-01

U 3Si 2 and iron-chromium-aluminum (Fe-Cr-Al) alloys are two of many proposed accident-tolerant fuel concepts for the fuel and cladding, respectively. The behavior of these materials under normal operating and accident reactor conditions is not well known. As part of the Department of Energy’s Accident Tolerant Fuel High Impact Problem program significant work has been conducted to investigate the U 3Si 2 and FeCrAl behavior under reactor conditions. This report presents the multiscale and multiphysics effort completed in fiscal year 2015. The report is split into four major categories including Density Functional Theory Developments, Molecular Dynamics Developments, Mesoscale Developments, andmore » Engineering Scale Developments. The work shown here is a compilation of a collaborative effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory and Anatech Corp.« less

Ratiometric near-infrared chemosensor for trivalent chromium ion based on tricarboyanine in living cells.

PubMed

Li, Chun-Yan; Kong, Xue-Fei; Li, Yong-Fei; Weng, Chao; Tang, Jia-Liang; Liu, Dan; Zhu, Wei-Guo

2014-05-08

A tricarboyanine derivative (IRPP) is applied as a ratiometric near-infrared chemosensor for detecting trivalent chromium ions (Cr(3+)) in living cells. Upon the addition of Cr(3+) to a solution of IRPP, large-scale shifts in the emission spectrum (from 755 nm to 561 nm) are observed. In the newly developed sensing system, these well-resolved emission peaks yield a sensing system that covers a linear range from 1.0×10(-7) to 1.0×10(-5) M with a detection limit of 2.5×10(-8) M. The experimental results show the response behavior of IRPP towards Cr(3+) is pH independent under neutral conditions (6.0-7.5). Most importantly, the fast response time (less than 3 min) and selectivity for Cr(3+) over other common metal ions provide a strong argument for the use of this sensor in real world applications. As a proof of concept, the proposed chemosensor has been used to detect and quantify Cr(3+) in river water samples and to image Cr(3+) in living cells with encouraging results. Copyright © 2014 Elsevier B.V. All rights reserved.

Role of oxygen diffusion at Ni/Cr2O3 interface in intergranular oxidation of Ni-Cr alloy

NASA Astrophysics Data System (ADS)

Medasani, Bharat; Sushko, Maria; Schreiber, Daniel; Rosso, Kevin; Bruemmer, Stephen

Certain Ni-Cr alloys used in nuclear systems experience intergranular oxidation and stress corrosion cracking when exposed to high-temperature water leading to their degradation and unexpected failure. To develop a mechanistic understanding of grain boundary oxidation processes, we proposed a mesoscale metal alloy oxidation model that combines quantum Density Functional Theory (DFT) with mesoscopic Poisson-Nernst-Planck/classical DFT. This framework encompasses the chemical specificity of elementary diffusion processes and mesoscale reactive dynamics, and allows modeling oxidation processes on experimentally relevant length scales from first principles. As a proof of concept, a preliminary model was previously employed that limited oxygen diffusion pathways to those through the oxide phase and did not allow oxygen diffusion in the alloy or across oxide/alloy interfaces. In this work, we expand the model to include oxygen diffusion pathways along Ni/Cr2O3 interfaces and demonstrate the increasing importance of such pathways for intergranular oxidation of Ni-Cr alloys with high Cr content. This work is supported by the U.S. Dept. of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. Simulations are performed using PNNL Institutional Computing facility.

Experimental Study on Dynamic Mechanical Properties of 30CrMnSiNi2A Steel.

NASA Astrophysics Data System (ADS)

Huang, Fenglei; Yao, Wei; Wu, Haijun; Zhang, Liansheng

2009-06-01

Under dynamic conditions, the strain-rate dependence of material response and high levels of hydrostatic pressure cause the material behavior to be significantly different from what is observed under quasi-static condition. The curves of stress and strain of 30CrMnSiNi2A steel in different strain rates are obtained with SHPB experiments. Metallographic analyses show that 30CrMnSiNi2A steel is sensitive to strain rate, and dynamic compression leads to shear failure with the angle 45^o as the small carbide which precipitates around grain boundary changes the properties of 30CrMnSiNi2A steel. From the SHPB experiments and quasi-static results, the incomplete Johnson-Cook model has been obtained: σ=[1587+382.5(ɛ^p)^0.245][1+0.017ɛ^*], which can offer parameters for theory application and numerical simulation.

Redox reactions of V(III) and Cr(III)picolinate complexes in aqueous solutions

NASA Astrophysics Data System (ADS)

Vinayakumar, C. K.; Dey, G. R.; Kishore, K.; Moorthy, P. N.

1996-12-01

Reactions of e aq-, H-atoms, OH, (CH 3) 2COH, and CO 2- radicals with V(III)picolinate and Cr(III)picolinate have been studied by the pulse radiolysis technique. The spectra of V(II)picolinate, V(IV)picolinate, Cr(II)picolinate, OH adduct of Cr(III)picolinate and Cr(IV)picolinate have been obtained and the rate constants of the reactions of various radicals with V(III) and Cr(III)picolinate have been determined. The implications of these results to the chemical decontamination of nuclear reactor systems are discussed.

Chromium Biosorption from Cr(VI) Aqueous Solutions by Cupressus lusitanica Bark: Kinetics, Equilibrium and Thermodynamic Studies.

PubMed

Netzahuatl-Muñoz, Alma Rosa; Cristiani-Urbina, María del Carmen; Cristiani-Urbina, Eliseo

2015-01-01

The present study investigated the kinetics, equilibrium and thermodynamics of chromium (Cr) ion biosorption from Cr(VI) aqueous solutions by Cupressus lusitanica bark (CLB). CLB total Cr biosorption capacity strongly depended on operating variables such as initial Cr(VI) concentration and contact time: as these variables rose, total Cr biosorption capacity increased significantly. Total Cr biosorption rate also increased with rising solution temperature. The pseudo-second-order model described the total Cr biosorption kinetic data best. Langmuir´s model fitted the experimental equilibrium biosorption data of total Cr best and predicted a maximum total Cr biosorption capacity of 305.4 mg g(-1). Total Cr biosorption by CLB is an endothermic and non-spontaneous process as indicated by the thermodynamic parameters. Results from the present kinetic, equilibrium and thermodynamic studies suggest that CLB biosorbs Cr ions from Cr(VI) aqueous solutions predominantly by a chemical sorption phenomenon. Low cost, availability, renewable nature, and effective total Cr biosorption make CLB a highly attractive and efficient method to remediate Cr(VI)-contaminated water and wastewater.

Chromium Biosorption from Cr(VI) Aqueous Solutions by Cupressus lusitanica Bark: Kinetics, Equilibrium and Thermodynamic Studies

PubMed Central

Netzahuatl-Muñoz, Alma Rosa; Cristiani-Urbina, María del Carmen; Cristiani-Urbina, Eliseo

2015-01-01

The present study investigated the kinetics, equilibrium and thermodynamics of chromium (Cr) ion biosorption from Cr(VI) aqueous solutions by Cupressus lusitanica bark (CLB). CLB total Cr biosorption capacity strongly depended on operating variables such as initial Cr(VI) concentration and contact time: as these variables rose, total Cr biosorption capacity increased significantly. Total Cr biosorption rate also increased with rising solution temperature. The pseudo-second-order model described the total Cr biosorption kinetic data best. Langmuir´s model fitted the experimental equilibrium biosorption data of total Cr best and predicted a maximum total Cr biosorption capacity of 305.4 mg g-1. Total Cr biosorption by CLB is an endothermic and non-spontaneous process as indicated by the thermodynamic parameters. Results from the present kinetic, equilibrium and thermodynamic studies suggest that CLB biosorbs Cr ions from Cr(VI) aqueous solutions predominantly by a chemical sorption phenomenon. Low cost, availability, renewable nature, and effective total Cr biosorption make CLB a highly attractive and efficient method to remediate Cr(VI)-contaminated water and wastewater. PMID:26352933

Thermonuclear 46Cr(p ,γ )47Mn rate in type-I x-ray bursts

NASA Astrophysics Data System (ADS)

He, J. J.; Parikh, A.; Xu, Y.; Zhang, Y. H.; Zhou, X. H.; Xu, H. S.

2017-10-01

The thermonuclear rate of the 46Cr(p ,γ )47Mn reaction has been determined using a newly evaluated proton separation energy of Sp(47Mn) =380 ±30 keV and nuclear structure information from the mirror nucleus 47Ti. The astrophysical impact of this new rate and previously available rates has been investigated through one-zone postprocessing type-I x-ray burst calculations. The present 46Cr(p ,γ )47Mn rate leads to a mass fraction at A =46 that is 60 times larger than that obtained using a statistical model rate. The new results constrain the calculated maximum and minimum mass fractions at A =46 and A =48 to be within factors of 12 and 4, respectively. Experimental studies of the level structure of 47Mn near the proton threshold are required to improve these model predictions.

[Efficacy of infliximab in the treatment of korean patients with crohns disease].

PubMed

Kim, Sai Hui; Yang, Suk; Kim, Kyung Jo; Kim, Eun Hee; Yoon, Soon Man; Ye, Byong Duk; Byeon, Jeong Sik; Myung, Seung Jae; Kim, Jin Ho

2009-08-01

Infliximab has been proven to be effective for refractory luminal and fistulizing Crohns disease (CD). We performed this study to demonstrate the efficacy of infliximab in Korean CD patients. Medical records of 40 CD patients who had been treated with infliximab were reviewed retrospectively. Among 40 patients, 11 (27.5%) patients were treated for refractory luminal disease, 14 (35%) for fistulizing disease, and 15 (37.5%) for both types. Clinical response rate was higher in 26 patients with refractory luminal disease (Complete response (CR), 73.1%; Partial response (PR), 23.1%) than in 29 patients with fistulizing disease (CR, 41.4%; PR, 31%) (p=0.024). The clinical response rate tended to be higher in 28 patients with external fistulas (CR, 46.4%; PR, 32.2%) than 4 patients with internal fistulas (PR, 25%; NR, 75%) (p=0.064). Among patients with external fistulas, the response rate of 8 patients with enterocutaneous fistulas (CR, 50%; PR, 12.5%) was not different from 20 patients with perianal fistulas (CR, 45%; PR, 40%). Among 20 patients with perianal fistulas, the response rate of 6 patients with perianal fistulas without a history of operation (CR, 83.3%; PR, 0%) was higher than 14 patients with perianal fistulas resistant to previous surgical treatment (CR, 28.6%; PR, 57.1%) (p=0.044). As for adverse reaction, 7 patients experienced mild infusion reaction, and 2 patients developed serious infection. Infliximab is more effective for refractory luminal disease than for fistulizing disease. In addition, clinical responses to infliximab are different according to subtypes of fistulas. These findings should be considered for the proper use of infliximab.

Activity and heart rate-based measures for outpatient cardiac rehabilitation.

PubMed

Bidargaddi, N P; Sarela, A

2008-01-01

Derive activity and heart rate (HR) monitor-based clinically relevant measures for outpatient cardiac rehabilitation (CR). We are currently collecting activity/ECG data from patients undergoing cardiac rehabilitation over duration of six weeks. From these data sets, we a) derive various measures which can be used in assessing home-based CR patients remotely and b) investigate the usefulness of continuous ambulatory HR and heart rate variability (HRV) for various core components of CR. The information provided by these measures is interpreted according to the CR guidelines framework by American Association of Cardiovascular and Pulmonary Rehabilitation (AACVPR), thus showing how these tools can be used in assessing the progress of patients' condition. The usefulness and significance of these measures from a health care professional perspective is also presented by evaluating them against the existing hospital-based measures through examples. Hospital-based CR programs, despite their clinical benefits are severely under-utilized and resource-demanding. Ambulatory monitoring technologies, which provide a means for continuous physiological monitoring of patients at home compared to hospital-based tools, can enable home-based CR. The clinically relevant measures derived from these tools not only reflect patients' condition in a similar way as conventional tools but also show the continuous status of functional capacity (FC).

Evaluation of clinical outcomes among nonvalvular atrial fibrillation patients treated with rivaroxaban or warfarin, stratified by renal function
.

PubMed

Weir, Matthew R; Haskell, Lloyd; Berger, Jeffrey S; Ashton, Veronica; Laliberté, François; Crivera, Concetta; Brown, Kip; Lefebvre, Patrick; Schein, Jeffrey

2018-05-01

Renal dysfunction increases the risk of thromboembolic and bleeding events in patients with nonvalvular atrial fibrillation (NVAF). Adult NVAF patients with ≥ 6 months prior to first warfarin or rivaroxaban dispensing were selected from the IMS Health Real-World Data Adjudicated Claims database (05/2011 - 06/2015) with electronic medical records. Ischemic stroke events, thromboembolic events (venous thromboembolism, myocardial infarction, or ischemic stroke), and major bleeding events were compared between patients by renal function identified by 1) relevant ICD-9-CM diagnosis codes and 2) estimated creatinine clearance (eCrCl). Baseline confounders were adjusted using inverse probability of treatment weights. The diagnosis-based analysis included 39,872 rivaroxaban and 48,637 warfarin users (3,572 and 8,230 with renal dysfunction, respectively). The eCrCl-based analysis included 874 rivaroxaban and 1,069 warfarin users (66 and 208 with eCrCl < 60 mL/min, respectively). In the diagnosis-based analysis, rivaroxaban users with renal dysfunction had a significantly lower stroke rate (HR = 0.55, p = 0.0004) compared to warfarin users; rivaroxaban users with and without renal dysfunction had significantly lower thromboembolic event rates (HR = 0.62, p < 0.0001; and HR = 0.64, p < 0.0001, respectively), and similar major bleeding rates to warfarin users. In the eCrCl-based analysis, rivaroxaban users with eCrCl ≥ 60 mL/min had a significantly lower thromboembolic event rate, but other outcomes were not statistically significant. Rivaroxaban-treated NVAF patients with diagnosed renal dysfunction had a significantly lower stroke rate compared to warfarin-treated patients. Regardless of renal dysfunction diagnoses, rivaroxaban users had lower thromboembolic event rates compared to warfarin users, and a similar rate of major bleeding. eCrCl-based analysis was limited by a small sample size.
.

Conventional and high-dose daunorubicin and idarubicin in acute myeloid leukaemia remission induction treatment: a mixed treatment comparison meta-analysis of 7258 patients.

PubMed

Sekine, Leo; Morais, Vinícius Daudt; Lima, Karine Margarites; Onsten, Tor Gunnar Hugo; Ziegelmann, Patrícia Klarmann; Ribeiro, Rodrigo Antonini

2015-12-01

Previous meta-analyses suggested that acute myeloid leukaemia induction regimens containing idarubicin (IDA) or high-dose daunorubicin (HDD) induce higher rates of complete remission (CR) than conventional-dose daunorubicin (CDD), with a possible benefit in overall survival. However, robust comparisons between these regimens are still lacking. We conducted a mixed treatment comparison meta-analysis regarding these three regimens. Mixed treatment comparison is a statistical method of data summarization that aggregates data from both direct and indirect effect estimates. Literature search strategy included MEDLINE, EMBASE, Cochrane, Scielo and LILACS, from inception until August 2013 and resulted in the inclusion of 17 trials enrolling 7258 adult patients. HDD [relative risk (RR) 1.13; 95% credible interval (CrI) 1.02-1.26] and IDA (RR 1.13; 95% CrI 1.05-1.23) showed higher CR rates than CDD. IDA also led to lower long-term overall mortality rates when compared with CDD (RR 0.93, 95% CrI 0.86-0.99), whereas HDD and CDD were no different (RR 0.94, 95% CrI 0.85-1.02). HDD and IDA comparison did not reach statistically significant differences in CR (RR 1.00; 95% CrI 0.89-1.11) and in long-term mortality (RR 1.01, 95% CrI 0.91-1.11). IDA and HDD are consistently superior to CDD in inducing CR, and IDA was associated with lower long-term mortality. On the basis of these findings, we recommend incorporation of IDA and HDD instead of the traditional CDD as standard treatments for acute myeloid leukaemia induction. The lack of HDD benefit on mortality, when compared with CDD in this study, should be cautiously addressed, because it may have been susceptible to underestimation because of statistical power limitations. Copyright © 2014 John Wiley & Sons, Ltd.

Status of Wrought FeCrAl-UO 2 Capsules Irradiated in the Advanced Test Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Field, Kevin G.; Harp, J.; Core, G.

2017-07-01

Candidate cladding materials for accident tolerant fuel applications require extensive testing and validation prior to commercial deployment within the nuclear power industry. One class of cladding materials, FeCrAl alloys, is currently undergoing such effort. Within these activities is a series of irradiation programs within the Advanced Test Reactor. These programs are developed to aid in commercial maturation and understand the fundamental mechanisms controlling the cladding performance during normal operation of a typical light water reactor. Three different irradiation programs are on-going; one designed as a simple proof-of-principle concept, the other to evaluate the susceptibility of FeCrAl to fuel-cladding chemical interaction,more » and the last to fully simulate the conditions of a pressurized water reactor experimentally. To date, nondestructive post-irradiation examination has been completed on the rodlet deemed FCA-L3 from the simple proof-of-concept irradiation program. Initial results show possible breach of the rodlet under irradiation but further studies are needed to conclusively determine whether breach has occurred and the underlying reasons for such a possible failure. Further work includes characterizing additional rodlets following irradiation.« less

Evaluating the effect of a web-based quality improvement system with feedback and outreach visits on guideline concordance in the field of cardiac rehabilitation: rationale and study protocol.

PubMed

van Engen-Verheul, Mariëtte M; de Keizer, Nicolette F; van der Veer, Sabine N; Kemps, Hareld M C; Scholte op Reimer, Wilma J M; Jaspers, Monique W M; Peek, Niels

2014-12-31

Implementation of clinical practice guidelines into daily care is hampered by a variety of barriers related to professional knowledge and collaboration in teams and organizations. To improve guideline concordance by changing the clinical decision-making behavior of professionals, computerized decision support (CDS) has been shown to be one of the most effective instruments. However, to address barriers at the organizational level, additional interventions are needed. Continuous monitoring and systematic improvement of quality are increasingly used to achieve change at this level in complex health care systems. The study aims to assess the effectiveness of a web-based quality improvement (QI) system with indicator-based performance feedback and educational outreach visits to overcome organizational barriers for guideline concordance in multidisciplinary teams in the field of cardiac rehabilitation (CR). A multicenter cluster-randomized trial with a balanced incomplete block design will be conducted in 18 Dutch CR clinics using an electronic patient record with CDS at the point of care. The intervention consists of (i) periodic performance feedback on quality indicators for CR and (ii) educational outreach visits to support local multidisciplinary QI teams focussing on systematically improving the care they provide. The intervention is supported by a web-based system which provides an overview of the feedback and facilitates development and monitoring of local QI plans. The primary outcome will be concordance to national CR guidelines with respect to the CR needs assessment and therapy indication procedure. Secondary outcomes are changes in performance of CR clinics as measured by structure, process and outcome indicators, and changes in practice variation on these indicators. We will also conduct a qualitative process evaluation (concept-mapping methodology) to assess experiences from participating CR clinics and to gain insight into factors which influence the implementation of the intervention. To our knowledge, this will be the first study to evaluate the effect of providing performance feedback with a web-based system that incorporates underlying QI concepts. The results may contribute to improving CR in the Netherlands, increasing knowledge on facilitators of guideline implementation in multidisciplinary health care teams and identifying success factors of multifaceted feedback interventions. NTR3251.

A gene expression signature of Retinoblastoma loss-of-function predicts resistance to neoadjuvant chemotherapy in ER-positive/HER2-positive breast cancer patients.

PubMed

Risi, Emanuela; Grilli, Andrea; Migliaccio, Ilenia; Biagioni, Chiara; McCartney, Amelia; Guarducci, Cristina; Bonechi, Martina; Benelli, Matteo; Vitale, Stefania; Biganzoli, Laura; Bicciato, Silvio; Di Leo, Angelo; Malorni, Luca

2018-07-01

HER2-positive (HER2+) breast cancers show heterogeneous response to chemotherapy, with the ER-positive (ER+) subgroup deriving less benefit. Loss of retinoblastoma tumor suppressor gene (RB1) function has been suggested as a cardinal feature of breast cancers that are more sensitive to chemotherapy and conversely resistant to CDK4/6 inhibitors. We performed a retrospective analysis exploring RBsig, a gene signature of RB loss, as a potential predictive marker of response to neoadjuvant chemotherapy in ER+/HER2+ breast cancer patients. We selected clinical trials of neoadjuvant chemotherapy ± anti-HER2 therapy in HER2+ breast cancer patients with available information on gene expression data, hormone receptor status, and pathological complete response (pCR) rates. RBsig expression was computed in silico and correlated with pCR. Ten studies fulfilled the inclusion criteria and were included in the analysis (514 patients). Overall, of 211 ER+/HER2+ breast cancer patients, 49 achieved pCR (23%). The pCR rate following chemotherapy ± anti-HER2 drugs in patients with RBsig low expression was significantly lower compared to patients with RBsig high expression (16% vs. 30%, respectively; Fisher's exact test p = 0.015). The area under the ROC curve (AUC) was 0.62 (p = 0.005). In the 303 ER-negative (ER-)/HER2+ patients treated with chemotherapy ± anti-HER2 drugs, the pCR rate was 43%. No correlation was found between RBsig expression and pCR rate in this group. Low expression of RBsig identifies a subset of ER+/HER2+ patients with low pCR rates following neoadjuvant chemotherapy ± anti-HER2 therapy. These patients may potentially be spared chemotherapy in favor of anti-HER2, endocrine therapy, and CDK 4/6 inhibitor combinations.

Validation of the flow-through chamber (FTC) and steady-state (SS) methods for clearance rate measurements in bivalves

PubMed Central

Larsen, Poul S.; Riisgård, Hans Ulrik

2012-01-01

Summary To obtain precise and reliable laboratory clearance rate (filtration rate) measurements with the ‘flow-through chamber method’ (FTC) the design must ensure that only inflow water reaches the bivalve's inhalant aperture and that exit flow is fully mixed. As earlier recommended these prerequisites can be checked by a plot of clearance rate (CR) versus increasing through-flow (Fl) to reach a plateau, which is the true CR, but we also recommend to plot percent particles cleared versus reciprocal through-flow where the plateau becomes the straight line CR/Fl, and we emphasize that the percent of particles cleared is in itself neither a criterion for valid CR measurement, nor an indicator of appropriate ‘chamber geometry’ as hitherto adapted in many studies. For the ‘steady-state method’ (SS), the design must ensure that inflow water becomes fully mixed with the bivalve's excurrent flow to establish a uniform chamber concentration prevailing at its incurrent flow and at the chamber outlet. These prerequisites can be checked by a plot of CR versus increasing Fl, which should give the true CR at all through-flows. Theoretically, the experimental uncertainty of CR for a given accuracy of concentration measurements depends on the percent reduction in particle concentration (100×P) from inlet to outlet of the ideal ‘chamber geomety’. For FTC, it decreases with increasing values of P while for SS it first decreases but then increases again, suggesting the use of an intermediate value of P. In practice, the optimal value of P may depend on the given ‘chamber geometry’. The fundamental differences between the FTC and the SS methods and practical guidelines for their use are pointed out, and new data on CR for the blue mussel, Mytilus edulis, illustrate a design and use of the SS method which may be employed in e.g. long-term growth experiments at constant algal concentrations. PMID:23213362

[Antagonistic effect of N-acetylcysteine on apoptosis of L-02 hepatocyte induced by Cr(VI) with or without caspase inhibitor].

PubMed

Chen, Jing; Zhong, Caigao; Zeng, Ming; Liu, Xinmin; Deng, Yuanyuan; Xiao, Fang

2010-11-01

To explore the antagonistic effect of N-acetylcysteine (NAC) on hexevalent chromium (Cr(VI))-induced apoptosis in L-02 hepatocytes with or without caspase inhibitors. L-02 hepatocytes were randomly divided into a control group, and Cr( VI), Z-VAD-fmk + Cr(VI), NAC + Cr(VI), Z-VAD-fmk + NAC + Cr (VI) four treatment groups, in which L-02 hepatocytes were cultured with Cr (VI) at the dose of 20 micromol/L for 6h. The rates of apoptosis in all groups were detected by flow cytometry (FC) after staining with propidium iodide (PI). The changes of mitochondrial membrane potential (deltapsim) and permeability transition pore (PTP) were determined by fluorescent spectrometer. The DNA damages in hepatocytes were observed by the single cell gel electrophoresis (SCGE). Cr(VI) significantly induced apoptosis of L-02 hepatocytes at the dose of 20 micromol/L for 6 hours (P < 0.05). However, NAC significantly decreased the rates of apoptosis of L-02 hepatocytes and alleviated the damages to mitochondria and DNA caused by Cr(VI) in L-02 hepatocytes with or without caspase (P < 0.05). However, in comparition with the non caspase-inhibited group, the protective effects of NAC decreased in the caspase-inhibited group (P < 0.05). NAC could protect the apoptosis of L-02 hepatocyte induced with Cr(VI) with or without caspase inhibitor, and caspase could not play a decisive role in this process.

Hexavalent chromium induced stress and metabolic responses in hybrid willows.

PubMed

Yu, Xiao-Zhang; Gu, Ji-Dong; Huang, Shen-Zhuo

2007-04-01

Metabolic responses to hexavalent chromium (Cr(6+)) stress and the uptake and translocation of Cr(6+ )were investigated using pre-rooted hybrid willows (Salix matsudana Koidz x Salix alba L.) exposed to hydroponic solution spiked with K(2)CrO(4) at 24.0 +/- 1 degrees C for 192 h. Various physiological parameters of the plants were monitored to determine toxicity from Cr(6+ )exposure. At Cr(6+) treatments of 50% higher than that of the non-treated control plants. As Cr concentrations were increased further, a slight increase in the transpiration rate was also observed compared with the controls. Negligible difference in the chlorophyll contents in leaves between the treated and the non-treated control plants was measured, except for willows exposed to 1.05 mg Cr/l. The response of soluble proteins in leaves of willows to Cr treatments was remarkable. Cr-induced toxicity appeared in all treatments resulting in reduced activities of catalase (CAT) and peroxidase (POD) compared to the controls. Superoxide dismutases (SOD) activity in the leaf cells showed a positive increase after Cr exposure. Of all selected parameters, soluble proteins in leaves were the most sensitive to Cr(6+ )doses, showing a significant linear correlation negatively (R (2) = 0.931). Uptake of Cr(6+) by willows grown in flasks was found to increase linearly with the added Cr(6+ )(a zero order kinetics), as indicated by the high R (2) (0.9322). Recovery of Cr in different parts of plant materials varied significantly with roots being the dominant site of Cr accumulation. Although the translocation to shoots was detected, the amount of Cr translocated to shoots was considerably small. The capacity of willows to assimilate Cr(6+ )was also evaluated using detached leaves and roots in sealed glass vessels in vivo. Uptake of Cr by roots was mediated possibly through an active transport mechanism, whereas the cuticle of leaves was the major obstacle to uptake Cr from the hydroponic solution. In addition, both cysteine and ascorbic acid showed a remarkable potential to reduce Cr(6+) at a neutral pH. Results indicated that the added Cr did not cause deleterious effects on plant physiological functions over a 192-h period of exposure. Significant removal of Cr from the hydroponic solution was observed in the presence of hybrid willows. The data also suggest that phytoremediation of Cr(6+) is possible and ecologically safe due to the minor translocation of Cr to aerial tissues.

Measurement of hydrogen solubility and desorption rate in V-4Cr-4Ti and liquid lithium-calcium alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, J.H.; Erck, R.; Park, E.T.

1997-04-01

Hydrogen solubility in V-4Cr-4Ti and liquid lithium-calcium was measured at a hydrogen pressure of 9.09 x 10{sup {minus}4} torr at temperatures between 250 and 700{degrees}C. Hydrogen solubility in V-4Cr-4Ti and liquid lithium decreased with temperature. The measured desorption rate of hydrogen in V-4Cr-4Ti is a thermally activated process; the activation energy is 0.067 eV. Oxygen-charged V-4Cr-4Ti specimens were also investigated to determine the effect of oxygen impurity on hydrogen solubility and desorption in the alloy. Oxygen in V-4Cr-4Ti increases hydrogen solubility and desorption kinetics. To determine the effect of a calcium oxide insulator coating on V-4Cr-4Ti, hydrogen solubility in lithium-calciummore » alloys that contained 0-8.0 percent calcium was also measured. The distribution ratio R of hydrogen between liquid lithium or lithium-calcium and V-4Cr-4Ti increased as temperature decreased (R {approx} 10 and 100 at 700 and 250{degrees}C, respectively). However at <267{degrees}C, solubility data could not be obtained by this method because of the slow kinetics of hydrogen permeation through the vanadium alloy.« less

Modeling hexavalent chromium removal in a Bacillus sp. fixed-film bioreactor.

PubMed

Nkhalambayausi-Chirwa, Evans M; Wang, Yi-Tin

2004-09-30

A one-dimensional diffusion-reaction model was developed to simulate Cr(VI) reduction in a Bacillus sp. pure culture biofilm reactor with glucose as a sole supplied carbon and energy source. Substrate utilization and Cr(VI) reduction in the biofilm was best represented by a system of (second-order) partial differential equations (PDEs). The PDE system was solved by the (fourth-order) Runge-Kutta method adjusted for mass transport resistance using the (second-order) Crank-Nicholson and Backward Euler finite difference methods. A heuristic procedure (genetic search algorithm) was used to find global optimum values of Cr(VI) reduction and substrate utilization rate kinetic parameters. The fixed-film bioreactor system yielded higher values of the maximum specific Cr(VI) reduction rate coefficient and Cr(VI) reduction capacity (kmc = 0.062 1/h, and Rc = 0.13 mg/mg, respectively) than previously determined in batch reactors (kmc = 0.022 1/h and Rc = 0.012 mg/mg). The model predicted effluent Cr(VI) concentration well with 98.9% confidence (sigmay2 = 2.37 mg2/L2, N = 119) and effluent glucose with 96.4 % confidence (sigmay(w)2 = 5402 mg2/L2, N = 121, w = 100) over a wide range of Cr(VI) loadings (10-498 mg Cr(VI)/L/d). Copyright 2004 Wiley Periodicals, Inc.

A daily herd Markov-chain model to study the reproductive and economic impact of reproductive programs combining timed artificial insemination and estrus detection.

PubMed

Giordano, J O; Kalantari, A S; Fricke, P M; Wiltbank, M C; Cabrera, V E

2012-09-01

Our objective was to compare the economic and reproductive performance of programs combining timed artificial insemination (TAI) and different levels of AI after estrus detection (ED) using a daily Markov-chain model. A dairy herd was modeled with every cow following daily probabilistic events of aging, replacement, mortality, pregnancy, pregnancy loss, and calving. The probability of pregnancy depended on the combination of probability of insemination and conception rate (CR). All nonpregnant cows had a probability of pregnancy between the end of the voluntary waiting period and days in milk cutoff for AI. After the cutoff, cows were labeled as do not breed and replaced when milk production was below a minimum milk threshold. A similar model was created to represent a replacement heifer herd to simulate and adjust the supply and demand of replacements. The net value (NV) of a program was the sum of milk income over feed cost, replacement and mortality cost, income from newborns, and reproductive costs. The model was used to compare the NV of 19 programs. One program used 100% TAI (42% CR for first TAI and 30% for second-and-later services), whereas the other programs combined TAI with ED. The proportion of cows receiving AI after ED for the combined programs ranged from 30 to 80%, with levels of CR of 25, 30, and 35%. As the proportion of cows receiving AI after ED increased, the CR of cows receiving TAI decreased. The combined programs with CR of 35% for cows receiving AI after ED had the greatest NV and reproductive performance at all levels of ED. The program using 100% TAI had greater NV and better reproductive performance than all programs with 25% CR after ED inseminations, whereas it had very similar performance to combined programs with up to 60% of cows receiving AI after ED and 30% CR. The factor with the greatest relative contribution to the differences among programs was income over feed cost, followed by replacement and reproductive costs. Adjusting the days in milk cutoff for AI to match the supply and demand of heifer replacements improved the NV of all programs except for those with 25% CR after ED, which had either no change or a decrease in NV. In summary, the economic value of reproductive management programs combining TAI and ED depended on the proportion of cows receiving AI after ED and the resulting CR. Adjusting the heifer supply and demand increased the NV of programs with heifer surplus and decreased the NV of programs with heifer deficit. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Kinetics and Mechanism of the Hydrogenation of CpCr(CO)3•/[CpCr(CO)3]2 Equilibrium to CpCr(CO)3H

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norton, Jack R.; Spataru, Tudor; Camaioni, Donald M.

2014-05-26

The kinetics of the hydrogenation of 2 CpCr(CO)3•/[CpCr(CO)3]2 to CpCr(CO)3H has been investigated. The reaction is second-order in Cr and first-order in H2, with a rate constant of 45 M 2s 1 at 25 °C in benzene. DFT calculations rule out an H2 complex as an intermediate, and suggest (a) end-on approach of H2 to one Cr of [CpCr(CO)3]2 as the Cr-Cr bond undergoes heterolytic cleavage, (b) heterolytic cleavage of the coordinated H2 between O and Cr, and (c) isomerization of the resulting O-protonated CpCr(CO)2(COH) to CpCr(CO)3H. The work at Pacific Northwest National Laboratory (PNNL) was supported by the U.S.more » Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences; Battelle operates PNNL for DOE.« less

Effect of estrous cow serum during bovine embryo culture on blastocyst development and cryotolerance after slow freezing or vitrification.

PubMed

Mucci, N; Aller, J; Kaiser, G G; Hozbor, F; Cabodevila, J; Alberio, R H

2006-05-01

The present study investigated the effect of estrous cow serum (ECS) during culture of bovine embryos on blastocyst development and survival after cryopreservation by slow freezing or vitrification. Embryos were derived from in vitro maturation (IVM) and in vitro fertilization (IVF) of abbatoir-derived oocytes. At Day 3, embryos were cultured in three different media: Charles Ronsenkrans medium + amino acids (CR1aa; without bovine serum albumin (BSA)) + 5% estrous cow serum (CR1-ECS), CR1aa + 3 mg/mL BSA (CR1-BSA) or CR1aa + 5% ECS + 3 mg/mL BSA (CR1-ECS-BSA). At 7.5 d post-insemination (PI), blastocyst yield and quality were evaluated; blastocysts and expanded blastocysts from each media were cryopreserved by Open Pulled Straw (OPS) vitrification method or slow freezing (1.5 M ethylene glycol, EM). Total blastocyst yield did not differ among CR1-ECS, CR1-BSA and CR1-ECS-BSA (30.9, 33.1 and 32.9%, respectively, P < 0.05). Embryo survival (hatching rate) was higher in vitrified versus slow-frozen embryos (43% versus 12%, respectively, P < 0.01), and in embryos cultured in CR1-BSA (40.3%) compared with those cultured in serum-containing media (CR1-ECS, 21.5% and CR1-ECS-BSA, 19.8%; P < 0.01). (a) it was possible to produce in vitro bovine embryos in serum-free culture medium without affecting blastocyst yield and quality; (b) serum-free medium produced the best quality embryos (in terms of post-cryopreservation survival); and (c) vitrification yielded the highest post-cryopreservation survival rates, regardless of the presence of serum in the culture medium.

Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeon, Seong-Jae, E-mail: jsjigst@ecei.tohoku.ac.jp; Saito, Shin; Hinata, Shintaro

Effect of bcc Cr{sub 80}Mn{sub 20} seed layer and Cr{sub 50}Ti{sub 50} amorphous texture inducing layer on the heteroepitaxy system in FePt-C granular film was studied by introducing a new concept of the layered structure. The concept suggested that the large grain seed layer in which the crystallographic texture was initially formed on an amorphous layer in the layered structure can reduce the angular distribution of (002) c-axis crystal orientation in the FePt-C granular film owing to heteroepitaxial growth. Structure analysis by X-ray diffraction revealed that (1) when the substrate heating temperature was elevated from 300 °C to 500 °C, grain sizemore » in the seed layer increased from 9.8 nm to 11.6 nm, and then decreased with further increasing the substrate temperature. The reduction of the grain size over 500 °C corresponds to the crystallization of the amorphous texture inducing layer, (2) when the grain size increased from 9.8 nm to 11.6 nm, the angular distribution of the (002) orientation in the seed layer dramatically decreased from 13.7° to 4.1°. It was shown that the large grain seed layer increased the perpendicular hysteresis in FePt-C granular film.« less

Effect of chlorhexidine/silver sulfadiazine-impregnated central venous catheters in an intensive care unit with a low blood stream infection rate after implementation of an educational program: a before-after trial.

PubMed

Schuerer, Douglas J E; Zack, Jeanne E; Thomas, James; Borecki, Ingrid B; Sona, Carrie S; Schallom, Marilyn E; Venker, Melissa; Nemeth, Jennifer L; Ward, Myrna R; Verjan, Linda; Warren, David K; Fraser, Victoria J; Mazuski, John E; Boyle, Walter A; Buchman, Timothy G; Coopersmith, Craig M

2007-08-01

Current guidelines recommend using antiseptic- or antibiotic-impregnated central venous catheters (CVCs) if, following a comprehensive strategy to prevent catheter-related blood stream infection (CR-BSI), infection rates remain above institutional goals based on benchmark values. The purpose of this study was to determine if chlorhexidine/silver sulfadiazine-impregnated CVCs could decrease the CR-BSI rate in an intensive care unit (ICU) with a low baseline infection rate. Pre-intervention and post-intervention observational study in a 24-bed surgical/trauma/burn ICU from October, 2002 to August, 2005. All patients requiring CVC placement after March, 2004 had a chlorhexidine/silver sulfadiazine-impregnated catheter inserted (post-intervention period). Twenty-three CR-BSIs occurred in 6,960 catheter days (3.3 per 1,000 catheter days)during the 17-month control period. After introduction of chlorhexidine/silver sulfadiazine-impregnated catheters, 16 CR-BSIs occurred in 7,732 catheter days (2.1 per 1,000 catheter days; p = 0.16). The average length of time required for an infection to become established after catheterization was similar in the two groups (8.4 vs. 8.6 days; p = 0.85). Chlorhexidine/silver sulfadiazine-impregnated catheters did not result in a statistically significant change in the microbiological profile of CR-BSIs, nor did they increase the incidence of resistant organisms. Although chlorhexidine/silver sulfadiazine-impregnated catheters are useful in specific patient populations, they did not result in a statistically significant decrease in the CR-BSI rate in this study, beyond what was achieved with education alone.

Infective and thrombotic complications of central venous catheters in patients with hematological malignancy: prospective evaluation of nontunneled devices.

PubMed

Worth, Leon J; Seymour, John F; Slavin, Monica A

2009-07-01

Central venous catheter (CVC)-related bloodstream infection (CR-BSI) is a significant complication in hematology patients. A range of CVC devices may be used, and risks for the development of complications are not uniform. The objectives of this study were to determine the natural history and rate of CVC-related complications and risk factors for CR-BSI and to compare device-specific complications in a hematology population. An observational cohort of patients with hematologic malignancy was prospectively studied following CVC insertion. Participants were reviewed until a CVC-related complication necessitated device removal, completion of therapy, death, or defined end-of-study date. The National Nosocomial Infection Surveillance definition for CR-BSI was used. Overall and device-specific rates of infective and noninfective complications were calculated and potential risk factors were captured. One hundred six CVCs (75 peripherally inserted central venous catheters [PICCs], 31 nontunneled CVCs) were evaluated in 66 patients, over 2,399 CVC days. Thrombosis occurred in 16 cases (15.1%), exit-site infection in two (1.9%), and CR-BSI in 18 (7.5 per 1,000 CVC days). No significant differences were found when complication rates in PICC and nontunneled devices were compared. An underlying diagnosis of acute myeloid leukemia was negatively associated with CR-BSI (odds ratio (OR) 0.14, p = 0.046), and a previous diagnosis of fungal infection was associated with infection (OR 22.82, p = 0.031). CR-BSI rates in our hematology population are comparable to prior reports. A low rate of exit-site infection and high proportion of thrombotic complications were observed. No significant differences in thrombotic or infective complications were evident when PICC and nontunneled devices were compared. PICC devices are a practical and safe option for management of hematology patients.

Low Cost Olefin Production from Shale Gas by Laser Enhanced Pyrolysis through Spatial Beam Decoherence. Phase 1 Final Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutton, Phillip N.

This report describes research into an innovative laser-enhanced catalytic pyrolysis technology that has the potential to significantly decrease the cost of cracking ethane and other alkanes found in shale gas ethylene. Similar to how water is resonantly heated by microwaves, a CO 2 laser can resonantly heat ethylene, producing radicals that convert ethane to ethylene at lower reactor temperatures. Proof of concept experiments were performed to determine if commercial grade CO 2 lasers at one-twenty fifth the cost of scientific grade lasers could crack ethane at lower temperatures than conventional technology. Cr doped MgO catalyst was then inserted in themore » reaction chamber to further increase conersion rates.« less

Low heat transfer oxidizer heat exchanger design and analysis

NASA Technical Reports Server (NTRS)

Kanic, P. G.; Kmiec, T. D.; Peckham, R. J.

1987-01-01

The RL10-IIB engine, a derivative of the RLIO, is capable of multi-mode thrust operation. This engine operates at two low thrust levels: tank head idle (THI), which is approximately 1 to 2 percent of full thrust, and pumped idle (PI), which is 10 percent of full thrust. Operation at THI provides vehicle propellant settling thrust and efficient engine thermal conditioning; PI operation provides vehicle tank pre-pressurization and maneuver thrust for log-g deployment. Stable combustion of the RL10-IIB engine at THI and PI thrust levels can be accomplished by providing gaseous oxygen at the propellant injector. Using gaseous hydrogen from the thrust chamber jacket as an energy source, a heat exchanger can be used to vaporize liquid oxygen without creating flow instability. This report summarizes the design and analysis of a United Aircraft Products (UAP) low-rate heat transfer heat exchanger concept for the RL10-IIB rocket engine. The design represents a second iteration of the RL10-IIB heat exchanger investigation program. The design and analysis of the first heat exchanger effort is presented in more detail in NASA CR-174857. Testing of the previous design is detailed in NASA CR-179487.

Enhancement of oxidative vaporization of chromium (III) oxide and chromium by oxygen atoms

NASA Technical Reports Server (NTRS)

Fryburg, G. C.; Kohl, F. J.; Stearns, C. A.

1974-01-01

Rates of oxidative vaporization of Cr2O3 were found to be markedly enhanced in the presence of O atoms. Investigations were conducted over the temperature range 470 to 1520 K. For Cr2O3 the enhancement was about 10 to the 9th power at 820 K in oxygen containing 2.5 percent atoms. Rapid oxidative vaporization of bare chromium was observed below 1070 K, the rate being about one-half that of Cr2O3. Results are interpreted in terms of thermochemical analysis.

Long-Term Cr Poisoning Effect on LSCF-GDC Composite Cathodes Sintered at Different Temperatures

DOE PAGES

Xiong, Chunyan; Taillon, Joshua A.; Pellegrinelli, Christopher; ...

2016-07-19

Here, the impact of sintering temperature on Cr-poisoning of solid oxide fuel cell (SOFC) cathodes was systematically studied. La 0.6Sr 0.4Fe 0.8Co 0.2O 3-δ - Ce 0.9Gd 0.1O 2-δ symmetric cells were aged at 750°C in synthetic air with the presence of Crofer 22 APU, a common high temperature interconnect, over 200 hours and electrochemical impedance spectroscopy (EIS) was used to determine the degradation process. Both the ohmic resistance (R Ω) and polarization resistance (R P) of LSCF-GDC cells, extracted from EIS spectra, for different sintering temperatures increase as a function of aging time. Furthermore, the Cr-related degradation rate increasesmore » with decreased cathode sintering temperature. The polarization resistance of cathode sintered at lower temperature (950°C) increases dramatically while aging with the presence of Cr and also significantly decreases the oxygen partial pressure dependence after aging. The degradation rate shows a positive correlation to the concentration of Cr. The results indicate that decreased sintering temperature increases the total surface area, leading to more available sites for Sr-Cr-O nucleation and thus greater Cr degradation.« less

Reduced Noise UV Enhancement of Etch Rates for Nuclear Tracks in CR-39

NASA Astrophysics Data System (ADS)

Sheets, Rebecca; Clarkson, David; Ume, Rubab; Regan, Sean; Sangster, Craig; Padalino, Stephen; McLean, James

2016-10-01

The use of CR-39 plastic as a Solid State Nuclear Track Detector is an effective technique for obtaining data in high-energy particle experiments including inertial confinement fusion. To reveal particle tracks after irradiation, CR-39 is chemically etched in NaOH at 80°C for 6 hours, producing micron-scale signal pits at the nuclear track sites. Using CR-39 irradiated with 5.4 MeV alpha particles and 1.0 MeV protons, we show that exposing the CR-39 to high intensity UV light before etching, with wavelengths between 240 nm and 350 nm, speeds the etch process. Elevated temperatures during UV exposure amplifies this effect, with etch rates up to 50% greater than unprocessed conditions. CR-39 pieces exposed to UV light and heat can also exhibit heightened levels of etch-induced noise (surface features not caused by nuclear particles). By illuminating the CR-39 from the side opposite to the tracks, a similar level of etch enhancement was obtained with little to no noise. The effective wavelength range is reduced, due to strong attenuation of shorter wavelengths. Funded in part by a LLE contract through the DOE.

Corrosion characteristics of Ni-base superalloys in high temperature steam with and without hydrogen

NASA Astrophysics Data System (ADS)

Kim, Donghoon; Kim, Daejong; Lee, Ho Jung; Jang, Changheui; Yoon, Duk Joo

2013-10-01

The hot steam corrosion behavior of Alloy 617 and Haynes 230 were evaluated in corrosion tests performed at 900 °C in steam and steam + 20 vol.% H2 environments. Corrosion rates of Alloy 617 was faster than that of Haynes 230 at 900 °C in steam and steam + 20 vol.% H2 environments. When hydrogen was added to steam, the corrosion rate was accelerated because added hydrogen increased the concentration of Cr interstitial defects in the oxide layer. Isolated nodular MnTiO3 oxides were formed on the MnCr2O4/Cr2O3 oxide layer and sub-layer Cr2O3 was formed in steam and steam + 20 vol.% H2 for Alloy 617. On the other hand, a MnCr2O4 layer was formed on top of the Cr2O3 oxide layer for Haynes 230. The extensive sub-layer Cr2O3 formation resulted from the oxygen or hydroxide inward diffusion in such environments. When hydrogen was added, the initial surface oxide morphology was changed from a convex shape to platelets because of the accelerated diffusion of cations under the oxide layer.

Chromium Isotope Behaviour During Aerobic Microbial Reduction Activities

NASA Astrophysics Data System (ADS)

Zhang, Q.; Amor, K.; Porcelli, D.; Thompson, I.

2014-12-01

Microbial activity is a very important, and possibly even the dominant, reduction mechanism for many metals in natural water systems. Isotope fractionations during microbial metal reduction can reflect one major mechanism in metal cycling in the environment, and isotopic signatures can be used to identify and quantify reduction processes during biogeochemical cycling in the present environment as well as in the past. There are many Cr (VI)-reducing bacteria that have been discovered and isolated from the environment, and Cr isotopes were found to be fractionated during microbial reduction processes. In this study, Cr reduction experiments have been undertaken to determine the conditions under which Cr is reduced and the corresponding isotope signals that are generated. The experiments have been done with a facultative bacteria Pseudomonas fluorescens LB 300, and several parameters that have potential impact on reduction mechanisms have been investigated. Electron donors are important for bacteria growth and metabolism. One factor that can control the rate of Cr reduction is the nature of the electron donor. The results show that using citrate as an electron donor can stimulate bacteria reduction activity to a large extent; the reduction rate is much higher (15.10 mgˑL-1hour-1) compared with experiments using glucose (6.65 mgˑL-1ˑhour-1), acetate (4.88 mgˑL-1hour-1) or propionate (4.85 mgˑL-1hour-1) as electron donors. Groups with higher electron donor concentrations have higher reduction rates. Chromium is toxic, and when increasing Cr concentrations in the medium, the bacteria reduction rate is also higher, which reflects bacteria adapting to the toxic environment. In the natural environment, under different pH conditions, bacteria may metabolise in different ways. In our experiments with pH, bacteria performed better in reducing Cr (VI) when pH = 8, and there are no significant differences between groups with pH = 4 or pH = 6. To investigate this further, Cr isotope determinations will be presented, which are essential in better understanding bacterial reducing activities under different environmental conditions and can also provide important background information for interpreting Cr isotope fractionations in natural environment, and using Cr isotopes to identify reduction by microbial activity.

Evaluation of the effects of the metals Cd, Cr, Pb and their mixture on the filtration and oxygen consumption rates in catarina scallop, Argopecten ventricosus juveniles.

PubMed

Sobrino-Figueroa, Alma S; Cáceres-Martinez, Carlos

2014-01-01

In this work, we evaluated the effect of sublethal concentrations ( LC25, LC10 and LC5) of cadmium, chromium, lead, and their mixture on the filtration rate and oxygen consumption rate of Catarina scallop, Argopecten ventricosus (Sowerby, 1842), juveniles, in order to evaluate the use of these biomarkers as a reliable tool in environmental monitoring studies, because these metals have been found at high levels in water and sediments in the Mexican Pacific systems. An inverse dose-response relationship was observed when metal concentration and exposure time increased, the filtration rate and oxygen consumption rate reduced. The physiological responses evaluated in this study were sufficiently sensitive to detect alterations in the organisms at 0.014 mg l(-1) Cd, 0.311 mg l(-1) Cr, 0.125 mg l(-1) Pb and 0.05 mg l(-1) Cd + Cr + Pb at 24 and 72 hrs. Cd showed the most drastic effect. The Catarina scallop juveniles were more sensitive to Cd, Cr and Pb as compared to other bivalves. The biomarkers evaluated are a reliable tool to carry out environmental monitoring studies.

Extraction of hexavalent chromium from chromated copper arsenate treated wood under alkaline conditions.

PubMed

Radivojevic, Suzana; Cooper, Paul A

2008-05-15

Information on chromium (Cr) oxidation states is essential for the assessment of environmental and health risks associated with the overall life-cycle of chromated copper arsenate (CCA) treated wood products because of differences in toxicity between trivalent [Cr(III)] and hexavalent [Cr(VI)] chromium compounds. Hypothetical Cr(VI) fixation products were investigated in CCA type C treated sawdust of aspen and red pine during or following preservative fixation by extraction with Cr(VI)-specific extractants. Cr(VI) was found only in alkaline extracts of treated wood. A major source of Cr(VI) was method-induced oxidation of fixed Cr(III) during alkaline extraction, as confirmed by demonstrated oxidation of Cr(III) from CrCl3 treated wood. Oxidation of nontoxic and immobile Cr(III) to toxic and mobile Cr(VI) was facilitated by the presence of wood at pH > 8.5. Thermodynamic equilibrium between Cr(III) and Cr(VI) is affected by pH, temperature, rates of dissolution of CrIII) compounds, and oxygen availability. Results of this study recommend against alkaline extraction protocols for determination of Cr(VI) in treated wood. This Cr oxidation mechanism can act as a previously unrecognized route for generation of hazardous Cr(VI) if CCA treated wood is exposed to alkaline conditions during its production, use, or waste management.

Fractionated gemtuzumab ozogamicin and standard dose cytarabine produced prolonged second remissions in patients over the age of 55 years with acute myeloid leukemia in late first relapse.

PubMed

Pilorge, Sylvain; Rigaudeau, Sophie; Rabian, Florence; Sarkozy, Clémentine; Taksin, Anne L; Farhat, Hassan; Merabet, Fathia; Ghez, Stéphanie; Raggueneau, Victoria; Terré, Christine; Garcia, Isabelle; Renneville, Aline; Preudhomme, Claude; Castaigne, Sylvie; Rousselot, Philippe

2014-04-01

Gemtuzumab ozogamicin (fGO), a humanized anti-CD33 monoclonal antibody linked to calicheamicin in combination with intensive chemotherapy gives high response rates in adult acute myeloid leukemia (AML) patients in relapse. However, reduced intensity chemotherapy in combination with fractionated GO has not been tested in aged relapsing patients. Patients from our institution with CD33+ AML aged 55 years or more in first late relapse (≥ 6 months) were proposed participation in a GO compassionate use program. Induction therapy consisted in fractionated GO (fGO; 3 mg/m², days 1, 4, 7) with standard-dose cytarabine (200 mg/m² /day, 7 days). Patients were consolidated with two courses of GO and intermediate dose cytarabine. Twenty-four patients (median age 68 years) received fGO with cytarabine. Median follow-up was 42 months. The response rate was 75%, including complete remission (CR) in 16 patients and CR with incomplete platelet recovery (CRp) in two patients. Two-year overall survival (OS) was 51% (95% CI: 28-69) and 2 years relapse-free survival (RFS) was 51% (95%CI: 25-72). Duration of second CR (CR2) was longer than first CR (CR1) in 9 out of 18 patients. Minimal residual disease (MRD) was negative in evaluable patients in CR2, particularly in NPM1 mutated cases. Toxicity was in line with that of the same fractionated single agent GO schedule. Fractionated GO with low intensity chemotherapy produced high response rates and prolonged CR2 in aged AML patients in first late relapse. Copyright © 2013 Wiley Periodicals, Inc.

Phase II study of medroxyprogesterone acetate plus metformin as a fertility-sparing treatment for atypical endometrial hyperplasia and endometrial cancer.

PubMed

Mitsuhashi, A; Sato, Y; Kiyokawa, T; Koshizaka, M; Hanaoka, H; Shozu, M

2016-02-01

Metformin, widely used in the treatment of type 2 diabetes mellitus, reduces the risk of cancer and relapse after treatment. Fertility-sparing treatment for endometrial cancer (EC) with progestin is associated with a high chance of disease regression, and the high relapse rate continues to be a problem. We assessed the efficacy of metformin in preventing recurrence after medroxyprogesterone acetate (MPA) as fertility-sparing treatment for atypical endometrial hyperplasia (AEH) and EC. This phase II study enrolled 17 patients with AEH and 19 patients with EC limited to the endometrium (age, 20-40 years). MPA (400 mg/day) and metformin (750-2250 mg/day) were administered for 24-36 weeks to achieve a complete response (CR). Metformin was administered until conception, even after MPA discontinuation. The primary end point was relapse-free survival (RFS) after remission. We analyzed all efficacy end points in the full analysis set. The body mass index was ≥25 kg/m(2) in 27 patients (mean, 31 kg/m(2); range, 19-51 kg/m(2)), and the homeostasis model assessment for insulin resistance index was ≥2.5 in 24 patients (mean, 4.7; range, 0.7-21). Two patients showed progression at 12 weeks [6%; 95% confidence interval (CI) 2-18]. At 36 weeks, 29 (81%; 95% CI 65-90) patients achieved CR, and 5 (14%; 95% CI 6-29) patients achieved partial response. During a median follow-up of 38 months (range, 9-66 months) after remission, relapse was confirmed in three of the patients who had achieved CR (relapse rate, 10%). The 3-year estimated RFS rate was 89%. No patients experienced severe toxicity. Metformin inhibited disease relapse after MPA therapy. The combination of metformin and MPA in EC treatment should be studied further. UMIN 000002210. © The Author 2015. Published by Oxford University Press on behalf of the European Society for Medical Oncology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

The effect of nutritional management of the dairy cow on reproductive efficiency.

PubMed

Roche, James F

2006-12-01

The cause of low fertility in dairy cows is multifactorial. Poor nutrition during the dry and early postpartum periods results in reduced glucose, insulin, insulin-like growth factor (IGF-I) and low LH pulse frequency with concomitant increases in beta-hydroxy butyrate, non-esterified fatty acids (NEFA) and triacylglycerol. Cows must mobilize large lipid, but also some protein reserves, with a consequent increased incidence of such metabolic disorders as hypocalcaemia, acidosis, ketosis, fatty liver and displaced abomasums. The occurrence of milk fever and ketosis affects uterine contractions, delays calving and increases the risk of retained foetal membranes (RFM) and endometritis. The nutritional risk factors that cause RFM are hypocalcaemia, high body condition score (BCS) at calving and deficiencies in Vitamin E and selenium. The risk factors for endometritis are hypocalcaemia, RFM, high triacylglycerol and NEFA. Thus, metabolic disorders predispose cows to gynaecological disorders, thereby reducing reproductive efficiency. Cows that are overconditioned at calving or those that lose excess body weight are more likely to have a prolonged interval to first oestrus, thereby prolonging days open. Nutritionally induced postpartum anoestrus is characterized by turnover of dominant follicles incapable of producing sufficient oestradiol to induce ovulation due to reduced LH pulse frequency. High nutrition can also increase metabolic clearance rate of steroid hormones such as progesterone or oestradiol. Lower concentrations of oestradiol on the day of oestrus are highly correlated with the occurrence of suboestrus, thereby making the detection of oestrus in high yielding cows even more difficult. Nutrition also affects conception rate (CR) to AI. Cows that develop hypocalcaemia, ketosis, acidosis or displaced abomasums have lower CRs and take longer to become pregnant. Excessive loss of BCS and excess protein content of the ration can reduce CR while supplemental fats that attenuate the production of F2alpha can improve CR. The increased metabolic clearance rate of progesterone (P4), which decreases blood concentrations during early embryo cleavage up to the blastocyst stage is associated with decreased CRs. In conclusion, poor nutritional management of the dairy cow, particularly before and after calving, is a key driver of infertility.

Hot Deformation and Dynamic Recrystallization Behavior of the Cu-Cr-Zr-Y Alloy

NASA Astrophysics Data System (ADS)

Zhang, Yi; Huili, Sun; Volinsky, Alex A.; Tian, Baohong; Chai, Zhe; Liu, Ping; Liu, Yong

2016-03-01

To study the workability and to optimize the hot deformation processing parameters of the Cu-Cr-Zr-Y alloy, the strain hardening effect and dynamic softening behavior of the Cu-Cr-Zr-Y alloy were investigated. The flow stress increases with the strain rate and stress decreases with deformation temperature. The critical conditions, including the critical strain and stress for the occurrence of dynamic recrystallization, were determined based on the alloy strain hardening rate. The critical stress related to the onset of dynamic recrystallization decreases with temperature. The evolution of DRX microstructure strongly depends on the deformation temperature and the strain rate. Dynamic recrystallization appears at high temperatures and low strain rates. The addition of Y can refine the grain and effectively accelerate dynamic recrystallization. Dislocation generation and multiplication are the main hot deformation mechanisms for the alloy. The deformation temperature increase and the strain rate decrease can promote dynamic recrystallization of the alloy.

Inner-sphere oxidation of ternary iminodiacetatochromium(III) complexes involving DL-valine and L-arginine as secondary ligands. Isokinetic relationship for the oxidation of ternary iminodiacetato-chromium(III) complexes by periodate.

PubMed

Ewais, Hassan A; Dahman, Faris D; Abdel-Khalek, Ahmed A

2009-02-04

In this paper, the kinetics of oxidation of [CrIII(HIDA)(Val)(H2O)2]+ and [CrIII(HIDA)(Arg)(H2O)2]+ (HIDA = iminodiacetic acid, Val = DL-valine and Arg = L-arginine) were studied. The choice of ternary complexes was attributed to two considerations. Firstly, in order to study the effect of the secondary ligands DL-valine and L-arginine on the stability of binary complex [CrIII(HIDA)(IDA)(H2O)] towards oxidation. Secondly, transition metal ternary complexes have received particular focus and have been employed in mapping protein surfaces as probes for biological redox centers and in protein capture for both purification and study. The results have shown that the reaction is first order with respect to both [IO4(-)] and the complex concentration, and the rate increases over the pH range 2.62 - 3.68 in both cases. The experimental rate law is consistent with a mechanism in which both the deprotonated forms of the complexes [CrIII(IDA)(Val)(H2O)2] and [CrIII(IDA)(Arg)(H2O)2] are significantly more reactive than the conjugate acids. The value of the intramolecular electron transfer rate constant for the oxidation of [CrIII(HIDA)(Arg)(H2O)2]+, k3 (1.82 x 10(-3) s(-1)), is greater than the value of k1 (1.22 x 10(-3) s(-1)) for the oxidation of [CrIII(HIDA)(Val)(H2O)2]+ at 45.0 degrees C and I = 0.20 mol dm(-3). It is proposed that electron transfer proceeds through an inner-sphere mechanism via coordination of IO4(-) to chromium(III). The oxidation of [CrIII(HIDA)(Val)(H2O)2]+ and [CrIII(HIDA)(Arg)(H2O)2]+ by periodate may proceed through an inner-sphere mechanism via two electron transfer giving chromium(VI). The value of the intramolecular electron transfer rate constant for the oxidation of [CrIII(HIDA)(Arg)(H2O)2]+, k3, is greater than the value of k1 for the oxidation of [CrIII(HIDA)(Val)(H2O)2]+. A common mechanism for the oxidation of ternary iminodiacetatochromium(III) complexes by periodate is proposed, and this is supported by an excellent isokinetic relationship between DeltaH* and DeltaS* values for these reactions.

Inner-sphere oxidation of ternary iminodiacetatochromium(III) complexes involving DL-valine and L-arginine as secondary ligands. Isokinetic relationship for the oxidation of ternary iminodiacetato-chromium(III) complexes by periodate

PubMed Central

Ewais, Hassan A; Dahman, Faris D; Abdel-Khalek, Ahmed A

2009-01-01

Background In this paper, the kinetics of oxidation of [CrIII(HIDA)(Val)(H2O)2]+ and [CrIII(HIDA)(Arg)(H2O)2]+ (HIDA = iminodiacetic acid, Val = DL-valine and Arg = L-arginine) were studied. The choice of ternary complexes was attributed to two considerations. Firstly, in order to study the effect of the secondary ligands DL-valine and L-arginine on the stability of binary complex [CrIII(HIDA)(IDA)(H2O)] towards oxidation. Secondly, transition metal ternary complexes have received particular focus and have been employed in mapping protein surfaces as probes for biological redox centers and in protein capture for both purification and study. Results The results have shown that the reaction is first order with respect to both [IO4-] and the complex concentration, and the rate increases over the pH range 2.62 – 3.68 in both cases. The experimental rate law is consistent with a mechanism in which both the deprotonated forms of the complexes [CrIII(IDA)(Val)(H2O)2] and [CrIII(IDA)(Arg)(H2O)2] are significantly more reactive than the conjugate acids. The value of the intramolecular electron transfer rate constant for the oxidation of [CrIII(HIDA)(Arg)(H2O)2]+, k3 (1.82 × 10-3 s-1), is greater than the value of k1 (1.22 × 10-3 s-1) for the oxidation of [CrIII(HIDA)(Val)(H2O)2]+ at 45.0°C and I = 0.20 mol dm-3. It is proposed that electron transfer proceeds through an inner-sphere mechanism via coordination of IO4- to chromium(III). Conclusion The oxidation of [CrIII(HIDA)(Val)(H2O)2]+ and [CrIII(HIDA)(Arg)(H2O)2]+ by periodate may proceed through an inner-sphere mechanism via two electron transfer giving chromium(VI). The value of the intramolecular electron transfer rate constant for the oxidation of [CrIII(HIDA)(Arg)(H2O)2]+, k3, is greater than the value of k1 for the oxidation of [CrIII(HIDA)(Val)(H2O)2]+. A common mechanism for the oxidation of ternary iminodiacetatochromium(III) complexes by periodate is proposed, and this is supported by an excellent isokinetic relationship between ΔH* and ΔS* values for these reactions. PMID:19193241

Dilatometric investigation of α(orthorhombic)→β(tetragonal) transformation in U-15 wt.% Cr alloy

NASA Astrophysics Data System (ADS)

Rameshkumar, Santhosh; Raju, Subramanian; Saibaba, Saroja

2018-04-01

The α→β transformation characteristics in U-15wt.% Cr alloy have been investigated by dilatometry at slow heating rates (3-10 K min-1). The starting microstructure of U-15Cr alloy consists of a mixture of metastable βm-U(body centred tetroganal), α-U(orthorhombic) and elemental Cr(bcc) phases. Upon heating, the metastable βmU phase has progressively transformed to equilibrium α-U structure; before, finally undergoing equilibrium α→β transformation with further increase in temperature. The measured α→β transformation temperature, when extrapolated to 0 K min-1 heating rate has been found to be higher than the currently accepted equilibrium phase diagram estimate. This is due to the kinetic difficulty associated with Cr-diffusion in U-15Cr alloy. The kinetics of α→β transformation upon continuous heating has been modeled in terms of a suitable framework for diffusional transformations, and the effective activation energy for overall transformation has been estimated to be in the range 160-180 kJ mol-1.

Nutritional supplement chromium picolinate causes sterility and lethal mutations in Drosophila melanogaster

PubMed Central

Hepburn, Dion D. D.; Xiao, Jiarong; Bindom, Sharell; Vincent, John B.; O'Donnell, Janis

2003-01-01

The nutritional dietary supplement chromium picolinate, [Cr(pic)3], has gained much notoriety as a safe supplement that supposedly promotes fat loss and muscle enhancement in humans. Thus, a significant industry has materialized around the incorporation of [Cr(pic)3] in many sports foods and drinks and a variety of weight loss products. However, in vitro studies have suggested that low levels of [Cr(pic)3] in the presence of biological reducing agents can catalytically generate reactive oxygen species, and recent in vivo studies have detected oxidative damage in rats receiving the supplement. The potential deleterious in vivo effects of this activity were examined by using Drosophila melanogaster. [Cr(pic)3], but not CrCl3, at levels of 260 μg Cr/kg food or less were found to lower the success rate of pupation and eclosion and to arrest development of pupae in a concentration dependent fashion. X-linked lethal analysis indicates that the supplement greatly enhances the rate of appearance of lethal mutations and dominant female sterility. PMID:12649323

Studies of the Cr-CrN coating characteristics formed by means of the magnetron sputtering method from bulk target

NASA Astrophysics Data System (ADS)

Kachalin, G. V.; Mednikov, A. F.; Tkhabisimov, A. B.; Sidorov, S. V.

2017-07-01

The paper presents the study’s results of ion-plasma chromium based coating characteristics produced on blade steel samples 12Kh13 and EI961 by means of the magnetron sputtering method from the bulk “hot” target. A set of metallographic studies and erosion tests of coatings were carried out using the research equipment URI (unique research installation) “Hydroshock rig Erosion-M” of NRU “MPEI”. Cr-CrN based coatings have a layered structure; thickness of intermediate Cr layers ranges from 0.7 to 1.7 μm, thickness of nitride layers CrN ranges from 1.5 to 4 μm, while the overall coating thickness is 17.0-21.5 μm coating microhardness is 1830-1880 HV0.05. The resulting coatings are found to increase 1.5 times the incubation period duration of erosion wear for steels 12Kh13 and EI961; they reduce the maximum erosion rate 1.3 times, and the steady erosion rate - 1.5 times.

Assessing glomerular filtration rate (GFR) in critically ill patients with acute kidney injury - true GFR versus urinary creatinine clearance and estimating equations

PubMed Central

2013-01-01

Introduction Estimation of kidney function in critically ill patients with acute kidney injury (AKI), is important for appropriate dosing of drugs and adjustment of therapeutic strategies, but challenging due to fluctuations in kidney function, creatinine metabolism and fluid balance. Data on the agreement between estimating and gold standard methods to assess glomerular filtration rate (GFR) in early AKI are lacking. We evaluated the agreement of urinary creatinine clearance (CrCl) and three commonly used estimating equations, the Cockcroft Gault (CG), the Modification of Diet in Renal Disease (MDRD) and the Chronic Kidney Disease Epidemiology Collaboration (CKD-EPI) equations, in comparison to GFR measured by the infusion clearance of chromium-ethylenediaminetetraacetic acid (51Cr-EDTA), in critically ill patients with early AKI after complicated cardiac surgery. Methods Thirty patients with early AKI were studied in the intensive care unit, 2 to 12 days after complicated cardiac surgery. The infusion clearance for 51Cr-EDTA obtained as a measure of GFR (GFR51Cr-EDTA) was calculated from the formula: GFR (mL/min/1.73m2) = (51Cr-EDTA infusion rate × 1.73)/(arterial 51Cr-EDTA × body surface area) and compared with the urinary CrCl and the estimated GFR (eGFR) from the three estimating equations. Urine was collected in two 30-minute periods to measure urine flow and urine creatinine. Urinary CrCl was calculated from the formula: CrCl (mL/min/1.73m2) = (urine volume × urine creatinine × 1.73)/(serum creatinine × 30 min × body surface area). Results The within-group error was lower for GFR51Cr-EDTA than the urinary CrCl method, 7.2% versus 55.0%. The between-method bias was 2.6, 11.6, 11.1 and 7.39 ml/min for eGFRCrCl, eGFRMDRD, eGFRCKD-EPI and eGFRCG, respectively, when compared to GFR51Cr-EDTA. The error was 103%, 68.7%, 67.7% and 68.0% for eGFRCrCl, eGFRMDRD, eGFRCKD-EPI and eGFRCG, respectively, when compared to GFR51Cr-EDTA. Conclusions The study demonstrated poor precision of the commonly utilized urinary CrCl method for assessment of GFR in critically ill patients with early AKI, suggesting that this should not be used as a reference method when validating new methods for assessing kidney function in this patient population. The commonly used estimating equations perform poorly when estimating GFR, with high biases and unacceptably high errors. PMID:23767877

Multiple heavy metals extraction and recovery from hazardous electroplating sludge waste via ultrasonically enhanced two-stage acid leaching.

PubMed

Li, Chuncheng; Xie, Fengchun; Ma, Yang; Cai, Tingting; Li, Haiying; Huang, Zhiyuan; Yuan, Gaoqing

2010-06-15

An ultrasonically enhanced two-stage acid leaching process on extracting and recovering multiple heavy metals from actual electroplating sludge was studied in lab tests. It provided an effective technique for separation of valuable metals (Cu, Ni and Zn) from less valuable metals (Fe and Cr) in electroplating sludge. The efficiency of the process had been measured with the leaching efficiencies and recovery rates of the metals. Enhanced by ultrasonic power, the first-stage acid leaching demonstrated leaching rates of 96.72%, 97.77%, 98.00%, 53.03%, and 0.44% for Cu, Ni, Zn, Cr, and Fe respectively, effectively separated half of Cr and almost all of Fe from mixed metals. The subsequent second-stage leaching achieved leaching rates of 75.03%, 81.05%, 81.39%, 1.02%, and 0% for Cu, Ni, Zn, Cr, and Fe that further separated Cu, Ni, and Zn from mixed metals. With the stabilized two-stage ultrasonically enhanced leaching, the resulting over all recovery rates of Cu, Ni, Zn, Cr and Fe from electroplating sludge could be achieved at 97.42%, 98.46%, 98.63%, 98.32% and 100% respectively, with Cr and Fe in solids and the rest of the metals in an aqueous solution discharged from the leaching system. The process performance parameters studied were pH, ultrasonic power, and contact time. The results were also confirmed in an industrial pilot-scale test, and same high metal recoveries were performed. Copyright 2010 Elsevier B.V. All rights reserved.

Interactions among cluster-root investment, leaf phosphorus concentration, and relative growth rate in two Lupinus species.

PubMed

Wang, Xing; Veneklaas, Erik J; Pearse, Stuart J; Lambers, Hans

2015-09-01

Cluster-root (CR) formation is a desirable trait to improve phosphorus (P) acquisition as global P resources are dwindling. CRs in some lupine species are suppressed at higher P status. Whether increased growth rate enhances CR formation due to a "dilution" of leaf P concentration is unknown. We investigated interactive effects of leaf P status and relative growth rate (RGR) on CR formation in two Lupinus species, which differ in their CR biomass investment. Variation in RGR was imposed by varying day length. Lupinus albus and L. pilosus were grown hydroponically with KH2PO4 at a day length of 6, 10, or 14 h. We used a slightly higher P supply at longer day lengths to avoid a decline in leaf P concentration, which would induce CRs. Cluster-root percentage, leaf P concentrations, and RGR were determined at 22, 38, and 52 d after sowing. Lupinus species grown at similar root P availability, but with a faster growth rate, as dependent on day length, showed a greater CR percentage. Because our aim to achieve exactly the same leaf P concentrations at different day lengths was only partially achieved, we carried out a multiple regression analysis. This analysis showed the CR percentage was strongly and negatively correlated with plant P status and only marginally and positively correlated with RGR. The two Lupinus species invariably formed fewer cluster roots at higher leaf P status, irrespective of RGR. Differences in RGR or leaf P concentration cannot explain the species-specific variation in cluster-root investment. © 2015 Botanical Society of America.

Reinventing the role of consumer research in today's open innovation ecosystem.

PubMed

Moskowitz, Howard R; Saguy, I Sam

2013-01-01

Consumer research (CR) has played a key role in the food and beverage industry. Emerging from laboratory product-tests, it has evolved into a corporate testing service that measures the consumer reactions to products/concepts using a wide range of analyses/metrics. We propose that CR transform itself in light of accelerated knowledge expansion, mounting global, and local economic pressure on corporations and changing consumer needs. The transformation moves from its traditional testing into creating profoundly new knowledge of the product and understanding of the corporation's current and future customers. CR's tasks will involve: contributing/expanding science, applying open innovation principles, and driving consumer-centric innovation. We identify seven paradigm shifts that will change CR, namely: a different way of working--from testing to open sourcing; from good corporate citizen to change leader; open new product development (NPD) process; new management roles/cultures; universities and industry, new education curricula, and cooperation; from battle over control to sustainable sharing is winning model (SiW); and the central role of design. This integrative, innovative CR requires the implementation of three recommendations: start the change process now, fine-tune along the way; create a new marketing/CR department; and educate and professionalize. These recommendations provide the blueprint for jump-starting the process and call for immediate actions to deal with the severity of the crises facing the CR profession.

Effect of Chromium on Corrosion Behavior of P110 Steels in CO2-H2S Environment with High Pressure and High Temperature

PubMed Central

Sun, Jianbo; Sun, Chong; Lin, Xueqiang; Cheng, Xiangkun; Liu, Huifeng

2016-01-01

The novel Cr-containing low alloy steels have exhibited good corrosion resistance in CO2 environment, mainly owing to the formation of Cr-enriched corrosion film. In order to evaluate whether it is applicable to the CO2 and H2S coexistence conditions, the corrosion behavior of low-chromium steels in CO2-H2S environment with high pressure and high temperature was investigated using weight loss measurement and surface characterization. The results showed that P110 steel suffered localized corrosion and both 3Cr-P110 and 5Cr-P110 steels exhibited general corrosion. However, the corrosion rate of 5Cr-P110 was the highest among them. The corrosion process of the steels was simultaneously governed by CO2 and H2S. The outer scales on the three steels mainly consisted of FeS1−x crystals, whereas the inner scales on Cr-containing steels comprised of amorphous FeS1−x, Cr(OH)3 and FeCO3, in contrast with the amorphous FeS1−x and FeCO3 mixture film of P110 steel. The more chromium the steel contains, the more chromium compounds the corrosion products contain. The addition of chromium in steels increases the uniformity of the Cr-enriched corrosion scales, eliminates the localized corrosion, but cannot decrease the general corrosion rates. The formation of FeS1−x may interfere with Cr-enriched corrosion scales and lowering the corrosion performance of 3Cr-P110 and 5Cr-P110 steels. PMID:28773328

Fate of chromium in soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prokisch, J.; Gyori, Z.; Kovacs, B.

The chromium cycle in soil was studied with speciation of chromium. The aim was to look for the possibilities the mobilization of chromium(III) and to measure the rate of chromate reduction in nature and pot and field experiments in Hungarian soils. The authors developed a sensitive and simple method for chromium speciation with a microcolumn connected an inductively coupled plasma atomic emission spectrometer. Detection limits are convenient to measure chromium forms in a 0.01 M CaCl{sub 2} extract of a contaminated soil, but it is not enough to measure that of the uncontaminated soils. CR(VI) as chromate anion is notmore » adsorbed on pH dependent temporary charges of clays but in strongly acidic soil. Therefore CR(VI) can be leached out easily from the top layer of soil and can be transported into the ground water. Chromate ion can be reduced to CR(III) by organic matter of soil in acidic medium. CR(VI) is more stable at higher pH and lower humus content. Thus the reduction much quicker in the upper, weakly acidic top layer. CR(VI) oxidizes the organic matter of soil. The rate of this reaction depends on pH values, the humus content of the soil and temperature. CR(III) leaching in different uncontaminated soils was studied too. There are 3 pathways of mobilization of Cr(III). When pH decreases in soil the CR(III) becomes more soluble, similarly to the aluminium(III) ion. When the soil contains large quantity of water soluble organic ligands, Cr makes complexes with them and complexes formed can be leached out from the top layer. The third possibility is the oxidation of CR(III) to Cr(VI). It could happen on surface of manganese dioxide in the well-aired top layer.« less

Caloric Restriction in Lean and Obese Strains of Laboratory ...

EPA Pesticide Factsheets

NEW FINDINGS: What is the central question of this study? How do lean and obese rats respond physiologically to caloric restriction? What is the main finding and its importance? Obese rats show marked benefits compared with lean animals. Reduced body fat is associated with improved longevity with caloric restriction (CR) in rodents. Little is known regarding effects of CR in genetically lean versus obese strains. Long-Evans (LE) and Brown Norway (BN) rats make an ideal comparison for a CR study because the percentage body fat of young adult LE rats is double that of BN rats. Male LE and BN rats were either fed ad libitum (AL) or were caloricallyrestricted to 80 or 90% of their AL weight. The percentages of fat, lean and fluid mass were measured non-invasively at 2- to 4-week intervals. Metabolic rate and respiratory quotient were measured after 3, 6, 9 and 12 months of CR. Overall health was scored monthly. The percentage of fat of the LE strain decreased with CR, whereas the percentage of fat of the BN strain remained above the AL group for several months. The percentage of lean mass increased above the AL for both strains subjected to CR. The percentage offluid was unaffected by CR. The average metabolic rate over 22 h of the BN rats subjected to CR was reduced, whereas that of LE rats was increased slightly above the AL group. The respiratory quotient of BN rats wasdecreased with CR. Overall health of the CR LE group was significantly improved compared with t

Assessment of expected breeding values for fertility traits of Murrah buffaloes under subtropical climate.

PubMed

Dash, Soumya; Chakravarty, A K; Singh, Avtar; Shivahre, Pushp Raj; Upadhyay, Arpan; Sah, Vaishali; Singh, K Mahesh

2015-03-01

The aim of the present study was to assess the influence of temperature and humidity prevalent under subtropical climate on the breeding values for fertility traits viz. service period (SP), pregnancy rate (PR) and conception rate (CR) of Murrah buffaloes in National Dairy Research Institute (NDRI) herd. Fertility data on 1379 records of 581 Murrah buffaloes spread over four lactations and climatic parameters viz. dry bulb temperature and relative humidity (RH) spanned over 20 years (1993-2012) were collected from NDRI and Central Soil and Salinity Research Institute, Karnal, India. Monthly average temperature humidity index (THI) values were estimated. Threshold THI value affecting fertility traits was identified by fixed least-squares model analysis. Three zones of non-heat stress, heat stress and critical heat stress zones were developed in a year. The genetic parameters heritability (h(2)) and repeatability (r) of each fertility trait were estimated. Genetic evaluation of Murrah buffaloes was performed in each zone with respect to their expected breeding values (EBV) for fertility traits. Effect of THI was found significant (p<0.001) on all fertility traits with threshold THI value identified as 75. Based on THI values, a year was classified into three zones: Non heat stress zone(THI 56.71-73.21), HSZ (THI 75.39-81.60) and critical HSZ (THI 80.27-81.60). The EBVfor SP, PR, CR were estimated as 138.57 days, 0.362 and 69.02% in non-HSZ while in HSZ EBV were found as 139.62 days, 0.358 and 68.81%, respectively. EBV for SP was increased to 140.92 days and for PR and CR, it was declined to 0.357 and 68.71% in critical HSZ. The negative effect of THI was observed on EBV of fertility traits under the non-HSZ and critical HSZ Thus, the influence of THI should be adjusted before estimating the breeding values for fertility traits in Murrah buffaloes.

A prospective, randomized evaluation of a novel everolimus-eluting coronary stent: the PLATINUM (a Prospective, Randomized, Multicenter Trial to Assess an Everolimus-Eluting Coronary Stent System [PROMUS Element] for the Treatment of Up to Two de Novo Coronary Artery Lesions) trial.

PubMed

Stone, Gregg W; Teirstein, Paul S; Meredith, Ian T; Farah, Bruno; Dubois, Christophe L; Feldman, Robert L; Dens, Joseph; Hagiwara, Nobuhisa; Allocco, Dominic J; Dawkins, Keith D

2011-04-19

We sought to evaluate the clinical outcomes with a novel platinum chromium everolimus-eluting stent (PtCr-EES) compared with a predicate cobalt chromium everolimus-eluting stent (CoCr-EES) in patients undergoing percutaneous coronary intervention (PCI). Randomized trials have demonstrated an excellent safety and efficacy profile for the CoCr-EES. The PtCr-EES uses the identical antiproliferative agent and polymer but with a novel platinum chromium scaffold designed for enhanced deliverability, vessel conformability, side-branch access, radiopacity, radial strength, and fracture resistance. A total of 1,530 patients undergoing PCI of 1 or 2 de novo native lesions were randomized at 132 worldwide sites to CoCr-EES (n = 762) or PtCr-EES (n = 768). The primary endpoint was the 12-month rate of target lesion failure (TLF), the composite of target vessel-related cardiac death, target vessel-related myocardial infarction (MI), or ischemia-driven target lesion revascularization (TLR) in the per-protocol population (patients who received ≥1 assigned study stent), powered for noninferiority. The 12-month rate of TLF in the per-protocol population occurred in 2.9% versus 3.4% of patients assigned to CoCr-EES versus PtCr-EES, respectively (difference: 0.5%, 95% confidence interval: -1.3% to 2.3%, p(noninferiority) = 0.001, p(superiority) = 0.60). By intention-to-treat, there were no significant differences between CoCr-EES and PtCr-EES in the 12-month rates of TLF (3.2% vs. 3.5%, p = 0.72), cardiac death or MI (2.5% vs. 2.0%, p = 0.56), TLR (1.9% vs. 1.9%, p = 0.96), or Academic Research Consortium definite or probable stent thrombosis (0.4% vs. 0.4%, p = 1.00). In this large-scale, prospective, single-blind randomized trial, a novel PtCr-EES was noninferior to the predicate CoCr-EES for TLF, with nonsignificant differences in measures of safety and efficacy through 12-month follow-up after PCI. Copyright © 2011 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Aging, rejuvenation, and memory effects in short-range Ising spin glass: Cu_0.5Co_0.5Cl_2-FeCl3 GBIC

NASA Astrophysics Data System (ADS)

Suzuki, M.; Suzuki, I. S.

2004-03-01

Cu_0.5Co_0.5Cl_2-FeCl3 GBIC undergoes a spin glass (SG) transition at Tg (= 3.92 ± 0.11 K). The system shows a dynamic behavior that has some similarities and some significant differences compared to a 3D Ising SG.^1 Here we report on non-equilibrium aging dynamics which has been studied using zero-field cooled (ZFC) magnetization and low frequency AC magnetic susceptibility.^2 The time dependence of the relaxation rate S(t) = (1/H)dM_ZFC/dln t for the ZFC magnetization after the ZFC aging protocol, shows a peak at a characteristic time t_cr near a wait time t_w, corresponding to a crossover from quasi equilibrium dynamics to non-equilibrium. The time t_cr strongly depends on t_w, temperature, magnetic field, and the temperature shift. The rejuvenation effect is observed in both i^' and i^'' under the T-shift and H-shift procedures. The memory of the specific spin configurations imprinted during the ZFC aging protocol can be recalled when the system is re-heated at a constant heating rate. The aging, rejuvenation, and memory effects are discussed in terms of the scaling concepts derived from numerical studies on 3D Edwards-Anderson spin glass model. 1. I.S. Suzuki and M. Suzuki, Phys. Rev. B 68, 094424 (2003) 2. M. Suzuki and I.S. Suzuki, cond-mat/0308285

Dynamic processes occurring at the Cr IIIaq-manganite (γ-MnOOH) interface: simultaneous adsorption, microprecipitation, oxidation/reduction, and dissolution

NASA Astrophysics Data System (ADS)

Weaver, Robert M.; Hochella, Michael F.; Ilton, Eugene S.

2002-12-01

The complex interaction between Cr IIIaq and manganite (γ-MnOOH) was systematically studied at room temperature over a pH range of 3 to 6, and within a concentration range of 10 -4 to 10 -2 M CrOH 2+aq. Solution compositional changes during batch reactions were characterized by inductively coupled plasma spectroscopy and ultraviolet-visible spectrophotometry. The manganites were characterized before and after reaction with X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), high-resolution field-emission SEM, and energy-dispersive spectroscopy analysis. Fluid-cell atomic force microscopy was used to follow these metal-mineral interactions in situ. The reactions are characterized by (1) sorption of Cr III and the surface-catalyzed microprecipitation of Cr III-hydroxy hydrate on manganite surfaces, (2) the acidic dissolution of the manganite, and (3) the simultaneous reductive dissolution of manganite coupled with the oxidation of Cr IIIaq to highly toxic Cr VIaq. Cr III-hydroxy hydrate was shown to precipitate on the manganite surface while still undersaturated in bulk solution. The rate of manganite dissolution increased with decreasing pH due both to acid-promoted and Mn-reduction-promoted dissolution. Cr oxidation also increased in the lower pH range, this as a result of its direct redox coupling with Mn reduction. Neither Mn II nor Cr VI were ever detected on manganite surfaces, even at the maximum rate of their generation. At the highest pHs of this study, Cr IIIaq was effectively removed from solution to form Cr III-hydroxy hydrate on manganite surfaces and in the bulk solution, and manganite dissolution and Cr VIaq generation were minimized. All interface reactions described above were heterogeneous across the manganite surfaces. This heterogeneity is a direct result of the heterogeneous semiconducting nature of natural manganite crystals and is also an expression of the proximity effect, whereby redox processes on semiconducting surfaces are not limited to next nearest neighbor sites.

Probing chromium(III) from chromium(VI) in cells by a fluorescent sensor

NASA Astrophysics Data System (ADS)

Hu, Xiangquan; Chai, Jie; Liu, Yanfei; Liu, Bin; Yang, Binsheng

2016-01-01

Cellular uptake of Cr(VI), followed by its reduction to Cr(III) with the formation of kinetically inert Cr(III) complexes, is a complex process. To better understand its physiological and pathological functions, efficient methods for the monitoring of Cr(VI) are desired. In this paper a selective fluorescent probe L, rhodamine hydrazide bearing a benzo[b]furan-2-carboxaldehyde group, was demonstrated as a red chemosensor for Cr(III) at about 586 nm. This probe has been used to probe Cr(III) which is reduced from Cr(VI) by reductants such as glutathione (GSH), vitamin C, cysteine (Cys), H2O2 and Dithiothreitol (DTT) by fluorescence spectra. Cr(VI) metabolism in vivo is primarily driven by Vc and GSH. Vc could reduce CrO42 - to Cr(III) in a faster rate than GSH. The indirectly detection limit for Cr(VI) by L + GSH system was determined to be 0.06 μM at pH = 6.2. Moreover, the confocal microscopy image experiments indicated that Cr(VI) can be reduced to Cr(III) inside cells rapidly and the resulted Cr(III) can be captured and imaged timely by L.

Interdiffusion in the Ni/TD-NiCr and Cr/TD-NiCr systems

NASA Technical Reports Server (NTRS)

Pawar, A. V.; Tenney, D. R.

1974-01-01

The diffusion of Ni and Cr into TD-NiCr has been studied over the 900 to 1100 C temperature range. The diffusion couples were prepared by electroplating Cr and Ni on polished TD-NiCr wafers. Concentration profiles produced as a result of isothermal diffusion at 905, 1000, and 1100 C were determined by electron microprobe analysis. The Boltzmann-Matano analysis was used to determine concentration-dependent diffusion coefficients which were found to compare favorably with previously reported values. These data suggest that 2 vol % ThO2 distribution has no appreciable effect on the rates of diffusion in TD-NiCr with a large grain size. This supports the view that an inert dispersoid in an alloy matrix will not in itself lead to enhanced diffusion unless a short-circuit diffusion structure is stabilized.

Helicobacter pylori Eradication Therapy Is Effective as the Initial Treatment for Patients with H. pylori-Negative and Disseminated Gastric Mucosa-Associated Lymphoid Tissue Lymphoma.

PubMed

Gong, Eun Jeong; Ahn, Ji Yong; Jung, Hwoon-Yong; Park, Hyungchul; Ko, Young Bo; Na, Hee Kyong; Jung, Kee Wook; Kim, Do Hoon; Lee, Jeong Hoon; Choi, Kee Don; Song, Ho June; Lee, Gin Hyug; Kim, Jin-Ho

2016-09-15

We investigated the effectiveness of Helicobacter pylori eradication therapy for gastric mucosaassociated lymphoid tissue (MALT) lymphoma regardless of the H. pylori infection status or disease stage. From November 1995 to September 2014, 345 subjects who were diagnosed with gastric MALT lymphoma and had received eradication therapy as their first-line treatment were eligible for inclusion in this study. A retrospective review was performed using the medical records. Of the 345 patients, H. pylori infection was detected in 317 patients (91.9%). The complete remission (CR) rate after eradication therapy was 82.3%, which was higher in H. pylori -positive patients than in H. pylori-negative patients (84.5% vs 57.1%, p=0.001). CR rates after eradication did not present significant differences between stages, and the CR rate was 83.3% for stage IE1 and 74.4% for stage IE2 or above (p=0.167). The overall CR rate was 87.2% after additional treatment, and neither H. pylori infection status nor stage showed differences according to the treatment response. Eradication therapy led to CR in 57.1% of H. pylori-negative patients and in 74.4% of patients with stage IE2 or above. Eradication therapy is worthwhile as an initial treatment for gastric MALT lymphoma regardless of the H. pylori infection status and stage.

Influence of TiO2 hollow sphere size on its photo-reduction activity for toxic Cr(VI) removal.

PubMed

Cai, Jiabai; Wu, Xueqing; Zheng, Fengying; Li, Shunxing; Wu, Yaling; Lin, Yanping; Lin, Liting; Liu, Biwen; Chen, Qiaoying; Lin, Luxiu

2017-03-15

After polystyrene@titanium dioxide (PS@TiO 2 ) composite with different size was calcined at designated temperature, TiO 2 hollow sphere with controllable size was obtained for high efficient photo-reduction of Cr(VI). The feature of the TiO 2 hollow sphere was investigated by SEM, TEM, XRD, UV-Vis, and photoluminescence. The photo-reduction of Cr(VI) were measured for the performance assessment of the TiO 2 hollow sphere, Cr(VI) was used as an electron acceptor. After irradiation for 2h, the photo-reduction rate of Cr(VI) (pH=2.82) for TiO 2 (450nm) was 96%, which exhibited an increase of 5% and 8% compared with TiO 2 (370nm) and TiO 2 (600nm). The absorption edges of TiO 2 hollow sphere (450nm) was largest with the increasing of hollow sphere size from 370 to 600nm. The optimal hollow sphere size of TiO 2 was 450nm for the photo-reduction of Cr(VI), because the light-harvesting efficiency (the best of absorption edge) and photo-generated electron-hole separation rate (the best of photo-reduction rate) of TiO 2 hollow sphere were controlled by its hollow sphere size. In addition, we find that the behavior of the hydrogen production was inhibited by the coexistence Cr(VI) solution. This study can improve our understanding of the mechanism for the activity enhancement by the optimal hollow sphere size of TiO 2 . Copyright © 2016 Elsevier Inc. All rights reserved.

Sliding friction and wear behavior of high entropy alloys at room and elevated temperatures

NASA Astrophysics Data System (ADS)

Kadhim, Dheyaa

Structure-tribological property relations have been studied for five high entropy alloys (HEAs). Microhardness, room and elevated (100°C and 300°C) temperature sliding friction coefficients and wear rates were determined for five HEAs: Co0.5 Cr Cu0.5 Fe Ni1.5 Al Ti0.4; Co Cr Fe Ni Al0.25 Ti0.75; Ti V Nb Cr Al; Al0.3CoCrFeNi; and Al0.3CuCrFeNi2. Wear surfaces were characterized with scanning electron microscopy and micro-Raman spectroscopy to determine the wear mechanisms and tribochemical phases, respectively. It was determined that the two HEAs Co0.5 Cr Cu0.5 Fe Ni1.5 Al Ti0.4 and Ti V Nb Cr Al exhibit an excellent balance of high hardness, low friction coefficients and wear rates compared to 440C stainless steel, a currently used bearing steel. This was attributed to their more ductile body centered cubic (BCC) solid solution phase along with the formation of tribochemical Cr oxide and Nb oxide phases, respectively, in the wear surfaces. This study provides guidelines for fabricating novel, low-friction, and wear-resistant HEAs for potential use at room and elevated temperatures, which will help reduce energy and material losses in friction and wear applications.

Enhanced abiotic reduction of Cr(VI) in a soil slurry system by natural biomaterial addition.

PubMed

Park, Donghee; Ahn, Chi Kyu; Kim, Young Mi; Yun, Yeoung-Sang; Park, Jong Moon

2008-12-30

Among various plant-based natural biomaterials, pine bark was chosen as an efficient biomaterial capable of removing toxic Cr(VI) from aqueous solution. XPS spectra indicated that Cr(VI) was abiotically reduced to Cr(III) in both liquid and solid phases. The Cr(VI)-reducing capacity of pine bark was determined as 545 (+/-1.3)mg-Cr(VI)g(-1) of it, which was 8.7 times higher than that of a common chemical Cr(VI)-reductant, FeSO4 x 7H2O. Because pine bark could completely reduce toxic Cr(VI) to less toxic or nontoxic Cr(III) even at neutral pH, it was used as an organic reductant to remediate Cr(VI)-contaminated soil in this study. Soil slurry system using a bottle roller was applied to ex situ slurry-phase remediation experiments. In the soil slurry system, pine bark completely reduced Cr(VI) to Cr(III) and adsorbed the reduced-Cr(III) on its surface. Abiotic remediation rate of Cr(VI)-contaminated soil increased with the increase of pine bark dosage and with the decreases of Cr(VI) and water contents. In conclusion, pine bark can be used to remediate Cr(VI)-contaminated soil efficiently and environmentally friendly.

Prediction of Ductile Fracture Behaviors for 42CrMo Steel at Elevated Temperatures

NASA Astrophysics Data System (ADS)

Lin, Y. C.; Liu, Yan-Xing; Liu, Ge; Chen, Ming-Song; Huang, Yuan-Chun

2015-01-01

The ductile fracture behaviors of 42CrMo steel are studied by hot tensile tests with the deformation temperature range of 1123-1373 K and strain rate range of 0.0001-0.1 s-1. Effects of deformation temperature and strain rate on the flow stress and fracture strain of the studied steel are discussed in detail. Based on the experimental results, a ductile damage model is established to describe the combined effects of deformation temperature and strain rate on the ductile fracture behaviors of 42CrMo steel. It is found that the flow stress first increases to a peak value and then decreases, showing an obvious dynamic softening. This is mainly attributed to the dynamic recrystallization and material intrinsic damage during the hot tensile deformation. The established damage model is verified by hot forging experiments and finite element simulations. Comparisons between the predicted and experimental results indicate that the established ductile damage model is capable of predicting the fracture behaviors of 42CrMo steel during hot forging.

Accelerating CR-39 Track Detector Processing by Utilizing UV

NASA Astrophysics Data System (ADS)

Sparling, Jonathan; Padalino, Stephen; McLean, James; Sangster, Craig; Regan, Sean

2017-10-01

The use of CR-39 plastic as a Solid State Nuclear Track Detector is an effective technique for obtaining data in high energy particle experiments including inertial confinement fusion. To reveal particle tracks after irradiation, CR-39 is chemically etched in NaOH at 80°C, producing micron-scale signal pits at the nuclear track sites. It has been shown that illuminating CR-39 with UV light prior to etching increases bulk and track etch rates, especially when combined with elevated temperature. Spectroscopic analysis for amorphous solids has helped identify which UV wavelengths are most effective at enhancing etch rates. Absorption peaks found in the near infrared range provide for efficient sample heating, and may allow targeting cooperative IR-UV chemistry. Avoiding UV induced noise can be achieved through variations in absorption depths with wavelength. Vacuum drying and water absorption tests allow measurement of the resulting variation of bulk etch rate with depth. Funded in part by the NSF and an Department of Energy Grant through the Lab of Laser Energetics.

Effect of Er,Cr:YSGG laser on human dentin fluid flow.

PubMed

Al-Omari, Wael M; Palamara, Joseph E

2013-11-01

The aim of the current investigation was to assess the rate and magnitude of dentin fluid flow of dentinal surfaces irradiated with Er,Cr:YSGG laser. Twenty extracted third molars were sectioned, mounted, and irradiated with Er,Cr:YSGG laser at 3.5 and 4.5 W power settings. Specimens were connected to an automated fluid flow measurement apparatus (Flodec). The rate, magnitude, and direction of dentin fluid flow were recorded at baseline and after irradiation. Nonparametric Wilcoxon signed ranks repeated measure t test revealed a statistically significant reduction in fluid flow for all the power settings. The 4.5-W power output reduced the flow significantly more than the 3.5 W. The samples showed a baseline outward flow followed by inward flow due to irradiation then followed by decreased outward flow. It was concluded that Er,Cr:YSGG laser irradiation at 3.5 and 4.5 W significantly reduced dentinal fluid flow rate. The reduction was directly proportional to power output.

Study on Adsorption of Chromium (VI) by Activated Carbon from Cassava Sludge

NASA Astrophysics Data System (ADS)

Yang, Jinhui; Li, Chuanshu; Yang, Bin; Kang, Sijun; Zhang, Zhen

2018-03-01

In this paper, a new type of adsorbent prepared by waste sludge from alcohol production industry was used to adsorb Cr (VI) in activated carbon from cassava sludge. A series of static adsorption experiments were carried out on the initial concentration of solution Cr (VI), pH value of solution, adsorption time and dosage of adsorbent. The results of single factor experiments show that the removal rate of Cr (VI) increases with the initial concentration of Cr(VI), while the adsorption amount is opposite. When the pH value of the solution is low, the adsorption effect of activated carbon is better.The adsorption time should be controlled within 40-60min. When the activated carbon dosage is increased, the removal rate increases but the adsorption capacity decreases.

Fuel Performance Calculations for FeCrAl Cladding in BWRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

George, Nathan; Sweet, Ryan; Maldonado, G. Ivan

2015-01-01

This study expands upon previous neutronics analyses of the reactivity impact of alternate cladding concepts in boiling water reactor (BWR) cores and directs focus toward contrasting fuel performance characteristics of FeCrAl cladding against those of traditional Zircaloy. Using neutronics results from a modern version of the 3D nodal simulator NESTLE, linear power histories were generated and supplied to the BISON-CASL code for fuel performance evaluations. BISON-CASL (formerly Peregrine) expands on material libraries implemented in the BISON fuel performance code and the MOOSE framework by providing proprietary material data. By creating material libraries for Zircaloy and FeCrAl cladding, the thermomechanical behaviormore » of the fuel rod (e.g., strains, centerline fuel temperature, and time to gap closure) were investigated and contrasted.« less

Fracture toughness and sliding properties of magnetron sputtered CrBC and CrBCN coatings

NASA Astrophysics Data System (ADS)

Wang, Qianzhi; Zhou, Fei; Ma, Qiang; Callisti, Mauro; Polcar, Tomas; Yan, Jiwang

2018-06-01

CrBC and CrBCN coatings with low and high B contents were deposited on 316L steel and Si wafers using an unbalanced magnetron sputtering system. Mechanical properties including hardness (H), elastic modulus (E) and fracture toughness (KIc) as well as residual stresses (σ) were quantified. A clear correlation between structural, mechanical and tribological properties of coatings was found. In particular, structural analyses indicated that N incorporation in CrBC coatings with high B content caused a significant structural evolution of the nanocomposite structure (crystalline grains embedded into an amorphous matrix) from nc-CrB2/(a-CrBx, a-BCx) to nc-CrN/(a-BCx, a-BN). As a result, the hardness of CrBC coating with high B content decreased from 23.4 to 16.3 GPa but the fracture toughness was enhanced. Consequently, less cracks initiated on CrBCN coatings during tribological tests, which combined with the shielding effect of a-BN on wear debris, led to a low friction coefficient and wear rate.

Preconception Maternal Iodine Status Is Positively Associated with IQ but Not with Measures of Executive Function in Childhood

PubMed Central

Robinson, Sian M; Crozier, Sarah R; Miles, Elizabeth A; Gale, Catharine R; Calder, Philip C; Cooper, Cyrus; Inskip, Hazel M; Godfrey, Keith M

2018-01-01

Abstract Background Adverse effects of severe maternal iodine deficiency in pregnancy on fetal brain development are well-established, but the effects of milder deficiency are uncertain. Most studies examine iodine status in pregnancy; less is known about iodine nutrition before conception. Objective We examined relations between maternal preconception iodine status and offspring cognitive function, within a prospective mother-offspring cohort. Methods Maternal iodine status was assessed through the use of the ratio of iodine:creatinine concentrations (I/Cr) in spot urine samples [median (IQR) period before conception 3.3 y (2.2–4.7 y)]. Childhood cognitive function was assessed at age 6–7 y. Full-scale IQ was assessed via the Wechsler Abbreviated Scale of Intelligence, and executive function through the use of tests from the Cambridge Neuropsychological Test Automated Battery (CANTAB). Analyses (n = 654 mother-child dyads) were adjusted for potential confounders including maternal intelligence, education, and breastfeeding duration. Results The median (IQR) urinary iodine concentration was 108.4 µg/L (62.2–167.8 µg/L) and the I/Cr ratio 114 µg/g (76–164 µg/g). The preconception I/Cr ratio was positively associated with child IQ, before and after adjustment for potential confounding influences [β = 0.13 (95% CI: 0.04, 0.21)/SD, P = 0.003]. 8.9% of women had a preconception urinary I/Cr ratio <50 µg/g; compared with those with an I/Cr ratio ≥150 µg/g, the IQ of their offspring was 0.49 (95% CI: 0.79, 0.18) SD lower. There were no associations with the executive function outcomes assessed via CANTAB, before or after adjustment for confounders. Conclusion The positive association between iodine status before conception and child IQ provides some support for demonstrated links between low maternal iodine status in pregnancy and poorer cognitive function reported in other studies. However, given the negative effects on school performance previously observed in children born to iodine-deficient mothers, the lack of associations with measures of executive function in the present study was unexpected. Further data are needed to establish the public health importance of low preconception iodine status. PMID:29767745

Toxicity Effect of Cr Stress on Seed Germination and Seedling Growth in Lactuca Sativa

NASA Astrophysics Data System (ADS)

Ma, Wan Zheng; Ma, Wan Min; Du, Ying Ying; Dan, Qiong Peng; Yin, Bing; Dai, Shan Shan; Hao, Xiang

2018-03-01

The impact of Cr6+ on the growth of lactuca sativa in Greenhouse Cucumber was investigated. The seeds of lacuna sativa Italian bolting resistance lettuce were treated by different Cr6+ concentration to study the effects on its seed germination and seedling growth. The results showed that the seed germination rate, vigor index of seedlings decreased with increment of Cr6+ concentration to varying degrees, and vigor germination, vigor index, raw weight, root length significantly lower. The absorption of lettuce seedlings on different nutrient elements is impacted by the concentration of Cr6+.

Accelerated vehicle-to-infrastructure (V2I) safety applications : concept of operations document.

DOT National Transportation Integrated Search

2007-01-01

On August 9, 2005, Congress passed the Safe, Accountable, Flexible, Efficient, Transportation Equity Act: A Legacy for Users (SAFETEA-LU). The legislation specifically continued the Intelligent Transportation Systems (ITS) program, recognizing the cr...

Point Defect Structure of Cr203

DTIC Science & Technology

1987-10-01

Calculation of Electron Hole Mobility ........................ 104 6.2.3 Construction of the Defect Concentration vs. Oxygen Pressure Diagram...1000’ to 16000C ............ 123 7.7 Calculated diffusion coefficient vs. oxygen partial pressure diagram for pure Cr203 at 1100 0 C...127 7.10 Calculated parabolic rate constant vs. oxygen partial pressure diagram for pure Cr203 at

Geochemical modeling of trivalent chromium migration in saline-sodic soil during Lasagna process: impact on soil physicochemical properties.

PubMed

Lukman, Salihu; Bukhari, Alaadin; Al-Malack, Muhammad H; Mu'azu, Nuhu D; Essa, Mohammed H

2014-01-01

Trivalent Cr is one of the heavy metals that are difficult to be removed from soil using electrokinetic study because of its geochemical properties. High buffering capacity soil is expected to reduce the mobility of the trivalent Cr and subsequently reduce the remedial efficiency thereby complicating the remediation process. In this study, geochemical modeling and migration of trivalent Cr in saline-sodic soil (high buffering capacity and alkaline) during integrated electrokinetics-adsorption remediation, called the Lasagna process, were investigated. The remedial efficiency of trivalent Cr in addition to the impacts of the Lasagna process on the physicochemical properties of the soil was studied. Box-Behnken design was used to study the interaction effects of voltage gradient, initial contaminant concentration, and polarity reversal rate on the soil pH, electroosmotic volume, soil electrical conductivity, current, and remedial efficiency of trivalent Cr in saline-sodic soil that was artificially spiked with Cr, Cu, Cd, Pb, Hg, phenol, and kerosene. Overall desirability of 0.715 was attained at the following optimal conditions: voltage gradient 0.36 V/cm; polarity reversal rate 17.63 hr; soil pH 10.0. Under these conditions, the expected trivalent Cr remedial efficiency is 64.75%.

Geochemical Modeling of Trivalent Chromium Migration in Saline-Sodic Soil during Lasagna Process: Impact on Soil Physicochemical Properties

PubMed Central

Bukhari, Alaadin; Al-Malack, Muhammad H.; Mu'azu, Nuhu D.; Essa, Mohammed H.

2014-01-01

Trivalent Cr is one of the heavy metals that are difficult to be removed from soil using electrokinetic study because of its geochemical properties. High buffering capacity soil is expected to reduce the mobility of the trivalent Cr and subsequently reduce the remedial efficiency thereby complicating the remediation process. In this study, geochemical modeling and migration of trivalent Cr in saline-sodic soil (high buffering capacity and alkaline) during integrated electrokinetics-adsorption remediation, called the Lasagna process, were investigated. The remedial efficiency of trivalent Cr in addition to the impacts of the Lasagna process on the physicochemical properties of the soil was studied. Box-Behnken design was used to study the interaction effects of voltage gradient, initial contaminant concentration, and polarity reversal rate on the soil pH, electroosmotic volume, soil electrical conductivity, current, and remedial efficiency of trivalent Cr in saline-sodic soil that was artificially spiked with Cr, Cu, Cd, Pb, Hg, phenol, and kerosene. Overall desirability of 0.715 was attained at the following optimal conditions: voltage gradient 0.36 V/cm; polarity reversal rate 17.63 hr; soil pH 10.0. Under these conditions, the expected trivalent Cr remedial efficiency is 64.75 %. PMID:25152905

Synergism between Trichuris suis and the microbial flora of the large intestine causing dysentery in pigs.

PubMed

Rutter, J M; Beer, R J

1975-02-01

The role of the microbial flora of the large intestine in experimental Trichuris suis infection was studied by comparing the clinical syndrome in conventionally reared (CR) pigs, specific pathogen-free pigs, and gnotobiotic pigs. Thedisease in CR pigs was characterized by a severe mucohemorrhagic enteritis; in contrast, a mild catarrhal enteritis was observed in specific pathogen-free and gnotobiotic pigs. Spirochaetes and vibrio-like organisms were observed only in CR pigs and increased during the clinical phase of the disease. The clinical syndrome was not transmitted by oral administration of intestinal or fecal material from infected CR pigs to CR pigs free of T. suis. Smaller numbers of T. suis produced diarrhea in CR pigs and significantly reduced the growth rates of infected animals; clinical signs and the reduction in growth rate was prevented by incorporating an antibacterial substance (dimetridazole) in the food. Although clinical trichuriasis closely resembles swin dysentery, the two syndromes seem to be distinct. The present results suggest that a microbial component acts synergistically with T. suis to produce the severe clinical syndrome in CR pigs, but identification of the microbial component and the mechanism by which clinical signs are produced await further studies of the bacterial flora of the large intestine of pigs.

Tissue accumulation and urinary excretion of chromium in rats fed diets containing graded levels of chromium chloride or chromium picolinate.

PubMed

Yoshida, Munehiro; Hatakeyama, Erika; Hosomi, Ryota; Kanda, Seiji; Nishiyama, Toshimasa; Fukunaga, Kenji

2010-08-01

To attempt a risk assessment of the excess intake of trivalent chromium (Cr), tissue Cr accumulation and urinary Cr excretion were examined in weanling rats fed experimental diets containing graded levels of Cr chloride (CrCl3) or Cr picolinate (CrPic). Thirty-six male weanling 4-weeks-old Wistar rats were divided into six groups and fed a casein-based semi-purified diet (Cr content: <0.02 microg/g) supplemented with 1, 10, or 100 microg Cr/g as CrCl3 or CrPic for 28 days. Among the experimental groups, no significant difference was observed in body weight; however, supplementation of 100 microg Cr/g to the diets caused a significant low liver weight irrespective of the chemical species of Cr. Activities of serum aspartate aminotransferase and alanine aminotransferase were significantly elevated in rats given CrPic at 100 microg Cr/g. In the liver, kidney and femur, Cr accumulation increased with elevation of the dietary Cr level. No influence of the difference in the chemical species of supplemented Cr was observed in the liver and kidney, but CrCl3 caused significantly higher Cr accumulation than CrPic in the femur of rats given 100 microg Cr/g. Daily urinary Cr excretion elevated with the increase of the dietary Cr level. Rats given CrPic showed significantly higher daily urinary Cr excretion than those given CrCl3, particularly at a dietary Cr level of 100 microg/g. The rate of urinary Cr excretion in rats given CrPic was constant, irrespective of the dietary Cr level, but that of rats given CrCl3 fell with the increase of the dietary Cr level. These results indicate that the lowest adverse effect level of dietary Cr is less than 100 microg/g, irrespective of the chemical species of Cr.

Silicon content design of CrSiN films for good anti-corrosion and anti-wear performances in NaOH solution

NASA Astrophysics Data System (ADS)

Wang, Haixin; Ye, Yuwei; Wang, Chunting; Zhang, Guangan; Liu, Wei

2018-06-01

The CrSiN films with different silicon contents were fabricated by medium frequency magnetron sputtering. The 304L stainless steel and Si (1 0 0) wafer were used for substrate specimens. Film plasticity, corrosion and tribological behaviors in 0.1 M NaOH solution were systematically investigated. Results show that the plasticity of CrN film could be improved by the addition of silicon. During the corrosion test, with the increase of silicon content, the corrosion current density exhibited a descending trend and impedance presented a rising trend. The COF and wear rate of as-prepared CrSiN film initially decreased and then increased as the silicon content increased. The CrSiN film with 12.7 at.% Si exhibited the lowest COF of 0.04 and a wear rate of 6.746  ×  10‑8 mm3 Nm‑1 in 0.1 M NaOH solution.

Elevated temperature deformation of thoria dispersed nickel-chromium

NASA Technical Reports Server (NTRS)

Kane, R. D.; Ebert, L. J.

1974-01-01

The deformation behavior of thoria nickel-chromium (TD-NiCr) was examined over the temperature range 593 C (1100 F) to 1260 C (2300 F) in tension and compression and at 1093 C (2000 F) in creep. Major emphasis was placed on: (1) the effects of the material and test related variables (grain size, temperature, stress and strain rate) on the deformation process; and (2) the evaluation of single crystal TD-NiCr material produced by a directional recrystallization process. Elevated temperature yield strength levels and creep activation enthalpies were found to increase with increasing grain size reaching maximum values for the single crystal TD-NiCr. Stress exponent of the steady state creep rate was also significantly higher for the single crystal TD-NiCr as compared to that determined for the polycrystalline materials. The elevated temperature deformation of TD-NiCr was analyzed in terms of two concurrent, parallel processes: diffusion controlled grain boundary sliding, and dislocation motion.

Supplementation with chromium picolinate recovers renal Cr concentration and improves carbohydrate metabolism and renal function in type 2 diabetic mice.

PubMed

Mita, Yukiko; Ishihara, Kengo; Fukuchi, Yoshiko; Fukuya, Yoko; Yasumoto, Kyoden

2005-01-01

To study the preventive effect of supplemented chromium picolinate (CrPic) on the development of diabetic nephropathy in mice, we analyzed the effects of CrPic supplementation on renal function and concentrations of serum glucose and tissue chromium (Cr). In experiment 1, male KK-Ay obese diabetic mice were fed either a control diet (control) or a diet supplemented with 2 mg/kg diet (Cr2) or 10 mg/kg diet (Cr10) of Cr for 12 wk. Cr10 significantly ameliorated hyperglycemia after a glucose load, creatinine clearance rates, and urinary microalbumin levels (p<0.05). In experiment 2, the Cr10 diet was fed to male KK-Ay obese diabetic mice and C57BL nondiabetic mice for 4 wk. The CrPic diet reduced urinary albumin excretion in the diabetic mice (p<0.05). Inductively coupled plasma-mass spectrometry analysis revealed that the renal Cr content and the recovery of renal Cr concentration after Cr supplementation were significantly lower in the diabetic mice than in the nondiabetic mice (p<0.01). These observations suggest that Cr supplementation of type 2 diabetic mice reduces the symptoms of hyperglycemia and improves the renal function by recovering renal Cr concentration.

The reduction of chromium (VI) by iron (II) in aqueous solutions

NASA Astrophysics Data System (ADS)

Pettine, Maurizio; D'Ottone, Luca; Campanella, Luigi; Millero, Frank J.; Passino, Roberto

1998-05-01

The rates of the reduction of Cr(VI) with Fe(II) were measured in NaCl, NaClO 4, and natural seawater as a function of pH (1.5-8.7), temperature (5-40°C) and ionic strength (I = 0.01-2 M). The pseudo first-order rate constant (log k 1) showed a parabolic dependence on pH decreasing from 1.5 to 4.5 and increasing from 5.5 to 8.7. The kinetics of the reaction in these two regions of pH also showed different influences of temperature, ionic strength, and reductant concentration. The rate of Cr(VI) reduction is described by the general expression -d[Cr(VI)]/dt = k [Cr(VI)] [Fe(II)] where k (M -1 min -1) can be determined from the log k=6.74-1.01 pH-188.5/T for the pH range 1.5-4.5 (σ = 0.2) and log k=11.93+0.95 pH-4260.1/T-1.06 I 0.5 for the pH range 5-8.7 (σ = 0.2) from 5 to 40°C and 0.01 to 2 M ionic strength. The effect of pH, temperature, and ionic strength on the reaction indicates that the reactions at low pH are due to H2CrO4+ Fe2+limit→k H2 A-Feproducts While the reactions at high pH are due to HCrO4-+ FeOH+limit→k HA-FeOHproductsHCrO4-+ Fe(OH)2limit→k HA-Fe(OH)2 products The overall rate expression over the entire pH range can be determined from (H 2A = H 2CrO 4) k=k H2 A-Feα( H2A)α( Fe2+)+k HA-FeOHα( HA-)α( FeOH+)+k HA-Fe(OH)2 α( HA-)α( Fe(OH)2) where k H2A-Fe = 5 x 10 6, k HA-FeOH = 1 x 10 6, k HA-Fe (OH)2= 5 x 10 11. In oxic aqueous systems Cr(VI) competes with O 2 in the oxidation of Fe(II) and an extension of the rate law for Cr(VI) reduction with Fe(II) in oxygenated solutions is proposed. The application of this extended rate law to environmental conditions suggests that this reaction influences the distribution of oxidized and reduced species of chromium in oxic and anoxic waters.

Mechanisms and rates of proton transfer to coordinated carboxydithioates: studies on [Ni(S2CR){PhP(CH2CH2PPh2)2}](+) (R = Me, Et, Bu(n) or Ph).

PubMed

Alwaaly, Ahmed; Clegg, William; Henderson, Richard A; Probert, Michael R; Waddell, Paul G

2015-02-21

The complexes [Ni(S2CR)(triphos)]BPh4 (R = Me, Et, Bu(n) or Ph; triphos = PhP{CH2CH2PPh2}2) have been prepared and characterised. X-ray crystallography (for R = Et, Ph, C6H4Me-4, C6H4OMe-4 and C6H4Cl-4) shows that the geometry of the five-coordinate nickel in the cation is best described as distorted trigonal bipyramidal, containing a bidentate carboxydithioate ligand with the two sulfur atoms spanning axial and equatorial sites, the other axial site being occupied by the central phosphorus of triphos. The reactions of [Ni(S2CR)(triphos)](+) with mixtures of HCl and Cl(-) in MeCN to form equilibrium solutions containing [Ni(SH(S)CR)(triphos)](2+) have been studied using stopped-flow spectrophotometry. The kinetics show that proton transfer is slower than the diffusion-controlled limit and involves at least two coupled equilibria. The first step involves the rapid association between [Ni(S2CR)(triphos)](+) and HCl to form the hydrogen-bonded precursor, {[Ni(S2CR)(triphos)](+)HCl} (K) and this is followed by the intramolecular proton transfer (k) to produce [Ni(SH(S)CR)(triphos)](2+). In the reaction of [Ni(S2CMe)(triphos)](+) the rate law is consistent with the carboxydithioate ligand undergoing chelate ring-opening after protonation. It seems likely that chelate ring-opening occurs for all [Ni(S2CR)(triphos)](+), but only with [Ni(S2CMe)(triphos)](+) is the protonation step sufficiently fast that chelate ring-opening is rate-limiting. With all other systems, proton transfer is rate-limiting. DFT calculations indicate that protonation can occur at either sulfur atom, but only protonation at the equatorial sulfur results in chelate ring-opening. The ways in which protonation of either sulfur atom complicates the analyses and interpretation of the kinetics are discussed.

Modeling of Cr(VI) Bioreduction Under Fermentative and Denitrifying Conditions

NASA Astrophysics Data System (ADS)

Molins, S.; Steefel, C.; Yang, L.; Beller, H. R.

2011-12-01

The mechanisms of bioreductive immobilization of Cr(VI) were investigated by reactive transport modeling of a set of flow-through column experiments performed using natural Hanford 100H aquifer sediment. The columns were continuously eluted with 5 μM Cr(VI), 5 mM lactate as the electron donor, and selected electron acceptors (tested individually). Here we focus on the two separate experimental conditions that showed the most removal of Cr(VI) from solution: fermentation and denitrification. In each case, a network of enzymatic and abiotic reaction pathways was considered to interpret the rate of chromate reduction. The model included biomass growth and decay, and thermodynamic limitations on reaction rates, and was constrained by effluent concentrations measured by IC and ICP-MS and additional information from bacterial isolates from column effluent. Under denitrifying conditions, Cr(VI) reduction was modeled as co-metabolic with nitrate reduction based on experimental observations and previous studies on a denitrifying bacterium derived from the Hanford 100H aquifer. The reactive transport model results supported this interpretation of the reaction mechanism and were used to quantify the efficiency of the process. The models results also suggest that biomass growth likely relied on a nitrogen source other than ammonium (e.g. nitrate). Under fermentative conditions and based on cell suspension studies performed on a bacterial isolate from the columns, the model assumes that Cr(VI) reduction is carried out directly by fermentative bacteria that convert lactate into acetate and propionate. The evolution to complete lactate fermentation and Cr(VI) reduction took place over a week's time and simulations were used to determine an estimate for a lower limit of the rate of chromate reduction by calibration with the flow-through column experimental results. In spite of sulfate being added to these columns, sulfate reduction proceeded at a slow rate and was not well constrained.

Profiling stainless steel welding processes to reduce fume emissions, hexavalent chromium emissions and operating costs in the workplace

PubMed Central

Keane, Michael; Siert, Arlen; Stone, Samuel; Chen, Bean T.

2016-01-01

Nine gas metal arc welding (GMAW) processes for stainless steel were assessed for fume generation rates, fume generation rates per g of electrode consumed, and emission rates for hexavalent chromium (Cr6+). Elemental manganese, nickel, chromium, iron emissions per unit length of weld and labor plus consumables costs were similarly measured. Flux-cored arc welding and shielded metal arc (SMAW) processes were also studied. The objective was to identify the best welding processes for reducing workplace exposures, and estimate costs for all processes. Using a conical chamber, fumes were collected, weighed, recovered and analyzed by inductively-coupled atomic emission spectroscopy for metals, and by ion chromatography for Cr6+. GMAW processes used were Surface Tension Transfer™, Regulated Metal Deposition™, Cold Metal Transfer™, short-circuit, axial spray, and pulsed spray modes. Flux-cored welding used gas shielding; SMAW used E308 rods. Costs were estimated as dollars per m length of a ¼ in (6.3 mm) thick horizontal butt weld; equipment costs were estimated as ratios of new equipment costs to a 250 ampere capacity SMAW welding machine. Results indicate a broad range of fume emission factors for the processes studied. Fume emission rates per g of electrode were lowest for GMAW processes such as pulsed-spray mode (0.2 mg/g), and highest for SMAW (8 mg fume/g electrode). Emission rates of Cr6+ ranged from 50 to 7800 μg/min, and Cr6+ generation rates per g electrode ranged from 1 to 270μg/g. Elemental Cr generation rates spanned 13 to 330μg/g. Manganese emission rates ranged from 50 to 300μg/g. Nickel emission rates ranged from 4 to140 μg/g. Labor and consumables costs ranged from $3.15 (GMAW pulsed spray) to $7.40 (SMAW) per meter of finished weld, and were measured or estimated for all 11 processes tested. Equipment costs for some processes may be as much as 5 times the cost of a typical SMAW welding machine. The results show that all of the GMAW processes in this study can substantially reduce fume, Cr6+, manganese and costs relative to SMAW, the most commonly used welding process, and several have exceptional capabilities for reducing emissions. PMID:26267301

Profiling stainless steel welding processes to reduce fume emissions, hexavalent chromium emissions and operating costs in the workplace.

PubMed

Keane, Michael; Siert, Arlen; Stone, Samuel; Chen, Bean T

2016-01-01

Nine gas metal arc welding (GMAW) processes for stainless steel were assessed for fume generation rates, fume generation rates per g of electrode consumed, and emission rates for hexavalent chromium (Cr(6+)). Elemental manganese, nickel, chromium, iron emissions per unit length of weld, and labor plus consumables costs were similarly measured. Flux-cored arc welding and shielded metal arc (SMAW) processes were also studied. The objective was to identify the best welding processes for reducing workplace exposures, and estimate costs for all processes. Using a conical chamber, fumes were collected, weighed, recovered, and analyzed by inductively coupled atomic emission spectroscopy for metals, and by ion chromatography for Cr(6+). GMAW processes used were Surface Tension Transfer, Regulated Metal Deposition, Cold Metal Transfer, short-circuit, axial spray, and pulsed spray modes. Flux-cored welding used gas shielding; SMAW used E308 rods. Costs were estimated as dollars per m length of a ¼ in (6.3 mm) thick horizontal butt weld; equipment costs were estimated as ratios of new equipment costs to a 250 ampere capacity SMAW welding machine. Results indicate a broad range of fume emission factors for the processes studied. Fume emission rates per g of electrode were lowest for GMAW processes such as pulsed-spray mode (0.2 mg/g), and highest for SMAW (8 mg fume/g electrode). Emission rates of Cr(6+) ranged from 50-7800 µg/min, and Cr(6+) generation rates per g electrode ranged from 1-270 µg/g. Elemental Cr generation rates spanned 13-330 µg/g. Manganese emission rates ranged from 50-300 µg/g. Nickel emission rates ranged from 4-140 µg/g. Labor and consumables costs ranged from $3.15 (GMAW pulsed spray) to $7.40 (SMAW) per meter of finished weld, and were measured or estimated for all 11 processes tested. Equipment costs for some processes may be as much as five times the cost of a typical SMAW welding machine. The results show that all of the GMAW processes in this study can substantially reduce fume, Cr(6+), manganese and costs relative to SMAW, the most commonly used welding process, and several have exceptional capabilities for reducing emissions.

Effect of short- and long-term heat stress on the conception risk of dairy cows under natural service and artificial insemination breeding programs.

PubMed

Schüller, L-K; Burfeind, O; Heuwieser, W

2016-04-01

The objectives of this retrospective study were to examine the effect of heat stress on natural service and artificial insemination (AI) breeding methods. We investigated the influence of short- and long-term heat stress on the conception risk (CR) of dairy cows bred by natural service or by AI with frozen-thawed or fresh semen. In addition, the relationship between breeding method and parity was determined. Cows bred by AI with frozen-thawed semen exposed to long-term heat stress (mean temperature-humidity index ≥73 in the period 21d before breeding) were 63% less likely to get pregnant compared with cows not exposed to heat stress. Cows bred by AI with fresh semen were 80% less likely to get pregnant during periods of short-term heat stress than during periods without heat stress. Furthermore, multiparous cows bred by AI with frozen-thawed or fresh semen were 22 and 67% less likely to get pregnant, respectively, than primiparous cows. No influence of heat stress or parity was noted on the CR of cows bred by natural service. The present study indicates that the likelihood of dairy cows becoming pregnant is reduced by short- and long-term heat stress depending on the type of semen employed. In particular, CR of cows inseminated with fresh semen is negatively affected by short-term heat stress and CR of cows inseminated with frozen-thawed semen is negatively affected by long-term heat stress. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Removal of hexavalent Cr by coconut coir and derived chars--the effect of surface functionality.

PubMed

Shen, Ying-Shuian; Wang, Shan-Li; Tzou, Yu-Min; Yan, Ya-Yi; Kuan, Wen-Hui

2012-01-01

The Cr(VI) removal by coconut coir (CC) and chars obtained at various pyrolysis temperatures were evaluated. Increasing the pyrolysis temperature resulted in an increased surface area of the chars, while the corresponding content of oxygen-containing functional groups of the chars decreased. The Cr(VI) removal by CC and CC-derived chars was primarily attributed to the reduction of Cr(VI) to Cr(III) by the materials and the extent and rate of the Cr(VI) reduction were determined by the oxygen-containing functional groups in the materials. The contribution of pure Cr(VI) adsorption to the overall Cr(VI) removal became relatively significant for the chars obtained at higher temperatures. Accordingly, to develop a cost-effective method for removing Cr(VI) from water, the original CC is more advantageous than the carbonaceous counterparts because no pyrolysis is required for the application and CC has a higher content of functional groups for reducing Cr(VI) to less toxic Cr(III). Copyright © 2011 Elsevier Ltd. All rights reserved.

IV INTERNATIONAL CONFERENCE ON ATOM AND MOLECULAR PULSED LASERS (AMPL'99): Critical electron density in a self-contained copper vapour laser in the restricted pulse repetition rate

NASA Astrophysics Data System (ADS)

Yakovlenko, Sergei I.

2000-06-01

One of the mechanisms of the inversion breaking in copper vapour lasers caused by a high prepulse electron density is considered. Inversion breaking occurs at a critical electron density Ne cr. If the prepulse electron density exceeds Ne cr, the electron temperature Te cr cannot reach, during a plasma heating pulse, the temperature of ~2eV required for lasing. A simple estimate of Ne cr is made.

Differential Simultaneous Liver and Kidney Transplant Benefit Based on Severity of Liver Damage at the Time of Transplantation

PubMed Central

Habib, Shahid; Khan, Khalid; Hsu, Chiu-Hsieh; Meister, Edward; Rana, Abbas; Boyer, Thomas

2017-01-01

Background We evaluated the concept of whether liver failure patients with a superimposed kidney injury receiving a simultaneous liver and kidney transplant (SLKT) have similar outcomes compared to patients with liver failure without a kidney injury receiving a liver transplantation (LT) alone. Methods Using data from the United Network of Organ Sharing (UNOS) database, patients were divided into five groups based on pre-transplant model for end-stage liver disease (MELD) scores and categorized as not having (serum creatinine (sCr) ≤ 1.5 mg/dL) or having (sCr > 1.5 mg/dL) renal dysfunction. Of 30,958 patients undergoing LT, 14,679 (47.5%) had renal dysfunction, and of those, 5,084 (16.4%) had dialysis. Results Survival in those (liver failure with renal dysfunction) receiving SLKT was significantly worse (P < 0.001) as compared to those with sCr < 1.5 mg/dL (liver failure only). The highest mortality rate observed was 21% in the 36+ MELD group with renal dysfunction with or without SLKT. In high MELD recipients (MELD > 30) with renal dysfunction, presence of renal dysfunction affects the outcome and SLKT does not improve survival. In low MELD recipients (16 - 20), presence of renal dysfunction at the time of transplantation does affect post-transplant survival, but survival is improved with SLKT. Conclusions SLKT improved 1-year survival only in low MELD (16 - 20) recipients but not in other groups. Performance of SLKT should be limited to patients where a benefit in survival and post-transplant outcomes can be demonstrated. PMID:28496531

Strengthening of biomedical Ni-free Co-Cr-Mo alloy by multipass "low-strain-per-pass" thermomechanical processing.

PubMed

Mori, Manami; Yamanaka, Kenta; Sato, Shigeo; Tsubaki, Shinki; Satoh, Kozue; Kumagai, Masayoshi; Imafuku, Muneyuki; Shobu, Takahisa; Chiba, Akihiko

2015-12-01

Further strengthening of biomedical Co-Cr-Mo alloys is desired, owing to the demand for improvements to their durability in applications such as artificial hip joints, spinal rods, bone plates, and screws. Here, we present a strategy-multipass "low-strain-per-pass" thermomechanical processing-for achieving high-strength biomedical Co-Cr-Mo alloys with sufficient ductility. The process primarily consists of multipass hot deformation, which involves repeated introduction of relatively small amounts of strain to the alloy at elevated temperatures. The concept was verified by performing hot rolling of a Co-28 Cr-6 Mo-0.13N (mass%) alloy and its strengthening mechanisms were examined. Strength increased monotonically with hot-rolling reduction, eventually reaching 1,400 MPa in 0.2% proof stress, an exceptionally high value. Synchrotron X-ray diffraction (XRD) line-profile analysis revealed a drastic increase in the dislocation density with an increase in hot-rolling reduction and proposed that the significant strengthening was primarily driven by the increased dislocation density, while the contributions of grain refinement were minor. In addition, extra strengthening, which originates from contributions of planar defects (stacking faults/deformation twins), became apparent for greater hot-rolling reductions. The results obtained in this work help in reconsidering the existing strengthening strategy for the alloys, and thus, a novel feasible manufacturing route using conventional hot deformation processing, such as forging, rolling, swaging, and drawing, is realized. The results obtained in this work suggested a novel microstructural design concept/feasible manufacturing route of high-strength Co-Cr-Mo alloys using conventional hot deformation processing. The present strategy focuses on the strengthening due to the introduction of a high density of lattice defects rather than grain refinement using dynamic recrystallization (DRX). The hot-rolled samples obtained by our process exhibited exceptional strength, which is comparable to the highest strength reported for biomedical Co-Cr-Mo alloys. It was also found that the acceptable ductility can be obtained even in such highly distorted Co-Cr-Mo alloys. We described the strengthening mechanisms in detail; this will be helpful for further investigations or industrial realization of the proposed strategy. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

High Cryptococcal Antigen Titers in Blood Are Predictive of Subclinical Cryptococcal Meningitis Among Human Immunodeficiency Virus-Infected Patients.

PubMed

Wake, Rachel M; Britz, Erika; Sriruttan, Charlotte; Rukasha, Ivy; Omar, Tanvier; Spencer, David C; Nel, Jeremy S; Mashamaite, Sello; Adelekan, Adeboye; Chiller, Tom M; Jarvis, Joseph N; Harrison, Thomas S; Govender, Nelesh P

2018-02-10

High mortality rates among asymptomatic cryptococcal antigen (CrAg)-positive patients identified through CrAg screening, despite preemptive fluconazole treatment, may be due to undiagnosed cryptococcal meningitis. Symptoms were reviewed in CrAg-positive patients identified by screening 19233 individuals with human immunodeficiency virus infection and CD4 cell counts <100/µL at 17 clinics and 3 hospitals in Johannesburg from September 2012 until September 2015, and at 2 hospitals until June 2016. Cerebrospinal fluid samples from 90 of 254 asymptomatic patients (35%) and 78 of 173 (45%) with headache only were analyzed for cryptococcal meningitis, considered present if Cryptococcus was identified by means of India ink microscopy, culture, or CrAg test. CrAg titers were determined with stored blood samples from 62 of these patients. The associations between blood CrAg titer, concurrent cryptococcal meningitis, and mortality rate were assessed. Cryptococcal meningitis was confirmed in 34% (95% confidence interval, 25%-43%; 31 of 90) of asymptomatic CrAg-positive patients and 90% (81%-96%; 70 of 78) with headache only. Blood CrAg titer was significantly associated with concurrent cryptococcal meningitis in asymptomatic patients (P < .001) and patients with headache only (P = .003). The optimal titer for predicting cryptococcal meningitis was >160 (sensitivity, 88.2%; specificity, 82.1%); the odds ratio for concurrent cryptococcal meningitis was 34.5 (95% confidence interval, 8.3-143.1; P < .001). About a third of asymptomatic CrAg-positive patients have concurrent cryptococcal meningitis. More effective clinical assessment strategies and antifungal regimens are required for CrAg-positive patients, including investigation for cryptococcal meningitis irrespective of symptoms. Where it is not possible to perform lumbar punctures in all CrAg-positive patients, blood CrAg titers should be used to target those most at risk of cryptococcal meningitis. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

The epidemiology of closed reduction for simple elbow dislocations and the incidence of early subsequent open reduction.

PubMed

Mayne, Ian P; Wasserstein, David; Modi, Chetan S; Henry, Patrick D G; Mahomed, Nizar; Veillette, Christian

2015-01-01

Simple elbow dislocations are often treated with closed reduction (CR); however, the rate of CR failure and factors that may predict failure have been largely underinvestigated. The objectives of this study were (1) to determine the incidence of elbow dislocations treated by CR in a universal health care system and (2) to identify patient characteristics associated with failed CR, defined as the subsequent need for open reduction. Patients ≥16 years old who underwent elbow CR by a physician between 1994 and 2010 were identified from administrative databases. Concurrent elbow fractures were excluded. The incidence density rate (IDR) of CR per 100,000 eligible person-years among the general population was calculated. Failed CR was defined as subsequent open reduction with or without ligament repair or reconstruction within 90 days. Patient and provider characteristics were modeled in a multivariate logistic regression for failure. The cohort consisted of 4878 patients (median age, 41 years) who underwent CR (IDR, 2.65 per 100,000 person-years), and 75 (1.5%) underwent subsequent open reduction with or without ligament repair or reconstruction (median time, 15 days). Young men (≤20 years) had the highest IDR (7.45 per 100,000 person-years), twice that of young women (P = .005). Patient characteristics associated with failed CR included older age (P = .001), admission to the hospital (P < .0001), >1 attempted CR (P = .001), and new orthopedic consultation in the 4 weeks after the CR (P = .02). Young men are at highest risk for CR for simple elbow dislocations; however, older patients are more likely to require open intervention, as are those with markers of a difficult reduction signifying potentially greater soft tissue damage. A comprehensive understanding of the epidemiology of simple elbow dislocation will aid management decisions. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Understanding the role of clay minerals in the chromium(VI) bioremoval by Pseudomonas aeruginosa CCTCC AB93066 under growth condition: microscopic, spectroscopic and kinetic analysis.

PubMed

Kang, Chunxi; Wu, Pingxiao; Li, Yuewu; Ruan, Bo; Li, Liping; Tran, Lytuong; Zhu, Nengwu; Dang, Zhi

2015-11-01

Laboratory batch experiments were conducted to investigate the role of clay minerals, e.g., kaolinite and vermiculite, in microbial Cr(VI) reduction by Pseudomonas aeruginosa under growth condition in glucose-amended mediums as a method for treating Cr(VI)-contaminated subsurface environment such as soil. Our results indicated that glucose could acted as an essential electron donor, and clay minerals significantly enhanced microbial Cr(VI) reduction rates by improving the consumption rate of glucose and stimulating the growth and propagation of P. aeruginosa. Cr(VI) bioreduction by both free cells and clay minerals-amended cells followed the pseudo-first-order kinetic model, with the latter one fitting better. The mass balance analyses and X-ray photoelectron spectroscopy analysis found that Cr(VI) was reduced to Cr(III) and the adsorption of total chromium on clay minerals-bacteria complex was small, implying that Cr(VI) bioremoval was not mainly due to the adsorption of Cr(VI) onto cells or clay minerals or clay minerals-cells complex but mainly due to the Cr(VI) reduction capacity of P. aeruginosa under the experimental conditions studied (e.g., pH 7). Atomic force microscopy revealed that the addition of clay minerals (e.g. vermiculite) decreased the surface roughness of Cr(VI)-laden cells and changed the cell morphology and dimension. Fourier transform infrared spectroscopy revealed that organic matters such as aliphatic species and/or proteins played an important role in the combination of cells and clay minerals. Scanning electron microscopy confirmed the attachment of cells on the surface of clay minerals, indicating that clay minerals could provide a microenvironment to protect cells from Cr(VI) toxicity and serve as growth-supporting materials. These findings manifested the underlying influence of clay minerals on microbial reduction of Cr(VI) and gave an understanding of the interaction between pollutants, the environment and the biota.

Mathematical models applied to the Cr(III) and Cr(VI) breakthrough curves.

PubMed

Ramirez C, Margarita; Pereira da Silva, Mônica; Ferreira L, Selma G; Vasco E, Oscar

2007-07-19

Trivalent and hexavalent chromium continuous biosorption was studied using residual brewer Saccharomyces cerevisiae immobilized in volcanic rock. The columns used in the process had a diameter of 4.5 cm and a length of 140 cm, working at an inlet flow rate of 15 mL/min. Breakthrough curves were used to study the yeast biosorption behavior in the process. The saturation time (ts) was 21 and 45 h for Cr(III) and Cr(VI), respectively, and a breakthrough time (tb) of 4 h for Cr(III) and 5 h for Cr(VI). The uptake capacity of the biosorbent for Cr(III) and Cr(VI) were 48 and 60 mg/g, respectively. Two non-diffusional mathematical models with parameters t0 and sigma were used to adjust the experimental data obtained. Microsoft Excel tools were used for the mathematical solution of the two parameters used.

Can Cr( iii ) substitute for Al( iii ) in the structure of boehmite?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chatterjee, Sayandev; Conroy, Michele A.; Smith, Frances N.

2016-01-01

The dissolution of boehmite is a technical issue for the Al industry because of its recalcitrant nature. In fact, a similar problem exists with boehmite in nuclear waste sludge at the Hanford site in eastern Washington State, USA. Dissolution of Al phases is required to reduce the waste loadings in the final borosilicate glass waste form. Although not the most common Al-bearing species in the sludge, boehmite may become a rate limiting step in the processing of the wastes. Hanford boehmite is an order of magnitude more resistant to dissolution in hot caustic solutions than expected from surface-normalized rates. Wemore » are exploring potential intrinsic and extrinsic effects that may limit boehmite reactivity; one clue comes from microstructural analyses that indicate an association of Cr with Al in the Hanford nuclear waste. Hence, in this first paper, we investigated the potential role of chromium on the reactivity of boehmite in caustic solution. An important finding was that irrespective of the synthesis pathway, amount of Cr(III), or the resultant morphology, there was no evidence for Cr incorporation in the bulk structure, in agreement with QM calculations. In fact, electron microscopic (EM) and spectroscopic analyses showed that Cr was enriched at the (101) edges of the boehmite. However, Cr had no measurable effect on the morphology during the synthesis step. In contrast, comparison of the morphologies of the synthetic Cr-doped and pure boehmite samples after exposure to caustic solutions provided evidence that Cr inhibited the corrosion. TEM showed that Cr was not homogeneously distributed at the surface. Consequently, Cr may have partially passivated the surface by blocking discrete energetic sites on the lateral surfaces of boehmite.« less

Reduction of aqueous chromate by Fe(II)/Fe(III) carbonate green rust: kinetic and mechanistic studies.

PubMed

Legrand, Ludovic; El Figuigui, Alaaeddine; Mercier, Florence; Chausse, Annie

2004-09-01

This work describes the heterogeneous reaction between FeII in carbonate green rust and aqueous chromate, in NaHCO3 solutions at 25 degrees C, and at pH values of 9.3-9.6. Evidence for reduction of CrVI to CrIII and concomitant solid-state oxidation of lattice FeII to FeIII was found from FeII titration and from structural analysis of the solids using FTIR, XRD, SEM, and XPS methods. Results indicate the formation of ferric oxyhydroxycarbonate and the concomitant precipitation of CrIII monolayers at the surface of the iron compound that induce passivation effects and progressive rate limitations. The number of CrIII monolayers formed at the completion of the reaction depends on [FeII]t=0, the molar concentration of FeII(solid) at t=0; on [n(o)]t=0, the molar concentration of reaction sites present at the surface of the solid phase at t=0; and on [CrVI]t=0, the molar concentration of CrVI at t=0. Kinetic data were modeled using a model based on the formation of successive CrIII monolayers, -(d[CrVI]/dt) = sigma(1)j k(i)[S] [CrVI]([n(i - 1)] - [n(i)]) with k(i)[S] (in s(-1) L mol(-1)), the rate coefficient of formation of CrIII monolayer i, and [n(i)] and [n(i - 1)], the molar concentration of CrIII precipitated in monolayer i and monolayer i - 1, respectively. Good matching curves were obtained with kinetic coefficients: k(1)[S] = 5-8 x 10(-4), k(2)[S] = 0.5-3 x 10(-5), and k(3)[S] about 1.7 x 10(-6) s(-1) m(-2) L. The CrVI removal efficiency progressively decreases along with the accumulation of CrIII monolayers at the surface of carbonate green rust particles. In the case of thick green rust particles resulting from the corrosion of iron in permeable reactive barriers, the quantity of FeII readily accessible for efficient CrVI removal should be rather low.

Flow-through Column Experiments and Modeling of Microbially Mediated Cr(VI) Reduction at Hanford 100H

NASA Astrophysics Data System (ADS)

Yang, L.; Molins, S.; Beller, H. R.; Brodie, E. L.; Steefel, C.; Nico, P. S.; Han, R.

2010-12-01

Microbially mediated Cr(VI) reduction at the Hanford 100H area was investigated by flow-through column experiments. Three separate experiments were conducted to promote microbial activities associated with denitrification, iron and sulfate reduction, respectively. Replicate columns packed with natural sediments from the site under anaerobic environment were injected with 5mM Lactate as the electron donor and 5 μM Cr(VI) in all experiments. Sulfate and nitrate solutions were added to act as the main electron acceptors in the respective experiments, while iron columns relied on the indigenous sediment iron (and manganese) oxides as electron acceptors. Column effluent solutions were analyzed by IC and ICP-MS to monitor the microbial consumption/conversion of lactate and the associated Cr(VI) reduction. Biogeochemical reactive transport modeling was performed to gain further insights into the reaction mechanisms and Cr(VI) bioreduction rates. All experimental columns showed a reduction of the injected Cr(VI). Columns under denitrifying conditions showed the least Cr(VI) reduction at early stages (<60 days) compared to columns run under other experimental conditions, but became more active over time, and ultimately showed the most consistent Cr(VI) reduction. A strong correlation between denitrification and Cr(VI) reduction processes was observed and was in agreement with the results obtained in batch experiments with a denitrifying bacterium isolated from the Hanford site. The accumulation of nitrite does not appear to have an adverse effect on Cr(VI) reduction rates. Reactive transport simulations indicated that biomass growth completely depleted influent ammonium, and called for an additional source of N to account for the measured reduction rates. Iron columns were the least active with undetectable consumption of the injected lactate, slowest cell growth, and the smallest change in Cr(VI) concentrations during the course of the experiment. In contrast, columns under sulfate-reducing/fermentative conditions exhibited the greatest Cr(VI) reduction capacity. Two sulfate columns evolved to complete lactate fermentation with acetate and propionate produced in the column effluent after 40 days of experiments. These fermenting columns showed a complete removal of injected Cr(VI), visible precipitation of sulfide minerals, and a significant increase in effluent Fe and Mn concentrations. Reactive transport simulations suggested that direct reduction of Cr(VI) by Fe(II) and Mn(II) released from the sediment could account for the observed Cr(VI) removal. The biogeochemical modeling was employed to test two hypotheses that could explain the release of Fe(II) and Mn(II) from the column sediments: 1) acetate produced by lactate fermentation provided the substrate for the growth of iron(III) and manganese(IV) oxide reducers, and 2) direct reduction of iron(III) and manganese(IV) oxides by hydrogen sulfide generated during sulfate reduction. Overall, experimental and modeling results suggested that Cr(VI) reduction in the sulfate-reducing columns occurred through a complex network of microbial reactions that included fermentation, sulfate reduction, and possibly the stimulated iron-reducing communities.

Exploratory studies of the potential anti-cancer effects of creatine.

PubMed

Campos-Ferraz, P L; Gualano, B; das Neves, W; Andrade, I T; Hangai, I; Pereira, R T S; Bezerra, R N; Deminice, R; Seelaender, M; Lancha, A H

2016-08-01

Two experiments were performed, in which male Wistar Walker 256 tumor-bearing rats were inoculated with 4 × 10(7) tumor cells subcutaneously and received either creatine (300 mg/kg body weight/day; CR) or placebo (water; PL) supplementation via intragastric gavage. In experiment 1, 50 rats were given PL (n = 22) or CR (n = 22) and a non-supplemented, non-inoculated group served as control CT (n = 6), for 40 days, and the survival rate and tumor mass were assessed. In experiment 2, 25 rats were given CR or PL for 15 days and sacrificed for biochemical analysis. Again, a non-supplemented, non-inoculated group served as control (CT; n = 6). Tumor and muscle creatine kinase (CK) activity and total creatine content, acidosis, inflammatory cytokines, and antioxidant capacity were assessed. Tumor growth was significantly reduced by approximately 30 % in CR when compared with PL (p = 0.03), although the survival rate was not significantly different between CR and PL (p = 0.65). Tumor creatine content tended to be higher in CR than PL (p = 0.096). Tumor CK activity in the cytosolic fraction was higher in CR than PL (p < 0.0001). Blood pCO2 was higher in CT and CR than PL (p = 0.0007 and p = 0.004, respectively). HCO3 was augmented in CT compared to PL (p = 0.03) and CR (p = 0.001). Plasma IL-6 was lower and IL-10 level was higher in CR than PL (p = 0.03 and p = 0.0007, respectively) and TNF-alpha featured a tendency of decrease in CR compared to PL (p = 0.08). Additionally, total antioxidant capacity tended to be lower in CT than PL (p = 0.07). Creatine supplementation was able to slow tumor growth without affecting the overall survival rate, probably due to the re-establishment of the CK-creatine system in cancer cells, leading to attenuation in acidosis, inflammation, and oxidative stress. These findings support the role of creatine as a putative anti-cancer agent as well as help in expanding our knowledge on its potential mechanisms of action in malignancies.

Can urinary excretion rate of malondialdehyde, uric acid and protein predict the severity and impending death in perinatal asphyxia?

PubMed

Banupriya, C; Ratnakar; Doureradjou, P; Mondal, N; Vishnu, Bhat; Koner, B C

2008-08-01

Perinatal asphyxia (PA) associated with multi-organ damage is a leading cause of neonatal mortality and morbidity. We evaluated if urinary malondialdehyde:creatinine (UMDA:Cr), uric acid:creatinine (UUA:Cr) and protein:creatinine (UP:Cr) vary with the severity of PA and if these parameters can predict the impending death in PA. Study included 20 asphyxiated and 20 healthy newborn males. Hypoxic-ischemic encephalopathy (HIE) staging, APGAR (activity, pulse, grimace, appearance and respiration) score and urinary protein, uric acid, creatinine and MDA were evaluated. UMDA:Cr, UUA:Cr and UP:Cr were significantly higher and correlated with APGAR and HIE in PA. By regression analysis also, urinary parameters were found to have significant association with HIE stage and APGAR in PA. Receiver operating characteristics (ROC) curve of UP:Cr, UUA:Cr and UMDA:Cr showed area under curve of 0.896 (p=0.003), 0.859 (p=0.008) and 0.849 (p=0.010) with cut-off value of 9.04 mg, 2.34 mg and 3.49 microg/mg of creatinine respectively that can optimally predict the impending death in PA. SDS-PAGE of unconcentrated urine detected both high (73 kDa and 68 kDa) and low molecular weight proteins (52 kDa, 47 kDa, 25 kDa and 20 kDa) in PA but not in controls. Urinary excretion rate of uric acid, MDA and proteins is higher and has potential to act as biochemical markers for severity evaluation and death prediction in PA.

Lack of supervision after residential cardiac rehabilitation increases cardiovascular risk factors.

PubMed

Berent, Robert; von Duvillard, Serge P; Auer, Johann; Sinzinger, Helmut; Schmid, Peter

2010-06-01

Cardiovascular rehabilitation (CR) is an important component of care for patients with cardiovascular disease (CVD) and has been well documented and promoted by various health organizations and position statements worldwide. The purpose of this study was to investigate whether patients readmitted to CR on average 16 months after their previous discharge, maintained the reduction in CVD risk factors, maintained or improved functional capacity, occurrence of adverse cardiovascular events, and possible modifications in prescribed medications. Five hundred and seventy patients (60+/-10 years) underwent cycle ergometry and blood sampling at the beginning, the end of 21+/-2 days of the previous CR, and again at readmission to CR. The CR consisted of cycling for 17+/-4 min at frequency of six times a week and daily walking for 45 min at 60-70% of the maximal individual heart rate. Blood total cholesterol, low-density lipoprotein-cholesterol, triglycerides, and body mass index decreased significantly during CR. Resting blood pressure, maximal performance (watts), maximal oxygen uptake, and heart rate recovery improved significantly in 1 min (P<0.001). At readmission, all traditional CVD risk factors increased significantly, although medication was unchanged and angiotensin-converting enzyme inhibitors were partly replaced by angiotensin II receptor antagonists. Exercise performance remained unchanged. At readmission, we observed an increase in CVD risk factors, although, physical fitness remained stable. Thus, failure of lifestyle modification after CR indicates the cause for concern. Reinforcement of home setting sessions of CR patients or other strategies to enhance long-term compliance to lifestyle changes could reduce the observed attrition in CR benefits.

Oxidative vaporization kinetics of Cr2O3 in oxygen from 1000 to 1300 C

NASA Technical Reports Server (NTRS)

Stearns, C. A.; Kohl, F. J.; Fryburg, G. C.

1974-01-01

Rates of oxidative vaporization of Cr2O3 on preoxidized resistively heated chromium were determined in flowing oxygen at a pressure of 0.115 Torr for temperatures from 1000 to 1300 C. Reaction controlled rates were obtained from experimental rates by a gold calibration technique, and these rates were shown to agree with those predicted by thermochemical analysis. The activation energy obtained for the oxidative vaporization reaction corresponded numerically with the thermochemical enthalpy of the reaction. A theoretical equation is given for calculating the rate from thermodynamic data using boundary-layer theory.

Cultural Diversity: Implications for Collaboration.

ERIC Educational Resources Information Center

Jairrels, Veda

1999-01-01

Explores the implications of an increasingly diverse school population for the process of teacher collaboration. Focuses on the competencies for collaboration as pertinent to diverse exceptional learners, the role of the special education teacher, and the concept of collaboration across disciplines. (Author/CR)

Damage tolerance assessment handbook. Volume 1 : introduction, fracture mechanics, fatigue crack propagation

DOT National Transportation Integrated Search

1999-02-01

The handbook is presented in two volumes. This volume, Volume I, introduces the damage tolerance concept with an historical perspective followed by the fundamentals of fracture mechanics and fatigue crack propagation. Various fracture criteria and cr...

Kinetic stable Cr isotopic fractionation between aqueous Cr(III)-Cl-H2O complexes at 25 °C: Implications for Cr(III) mobility and isotopic variations in modern and ancient natural systems

NASA Astrophysics Data System (ADS)

Babechuk, Michael G.; Kleinhanns, Ilka C.; Reitter, Elmar; Schoenberg, Ronny

2018-02-01

The stable Cr isotope fractionation preserved in natural substances has been attributed predominantly to Cr(III)-Cr(VI) redox transformations. However, non-redox reaction pathways (e.g., ligand-promoted dissolution, ligand exchange, adsorption of Cr(III)) are liable to contribute to isotopic fractionation in natural systems given that soluble Cr(III)-ligands have been directly documented or modeled in several marine, continental, and hydrothermal environments. This study isolates the stable Cr isotope fractionation accompanying Cl-H2O ligand exchange during the transformation of three aqueous species in the Cr(III)-Cl-H2O system, [CrCl2(H2O)4]+aq (abr. CrCl2+ or S1), [CrCl(H2O)5]2+aq (abr. CrCl2+ or S2), and [Cr(H2O)6]3+aq (abr. Cr3+ or S3), at low pH (≤2). In dilute HCl (0.01 to 1 M), Cr3+ is the kinetically favoured species and transformation of CrCl2+ to CrCl2+ to Cr3+ via 2 steps of dechlorination/hydrolyzation begins immediately upon dissolution of a Cr(III)-Cl solid. Individual species are separated with cation exchange chromatography at different stages of transformation and inter- and intra-species (across an elution peak of one species) isotopic fractionation of up to 1 and 2‰ (δ53/52Cr), respectively, is documented. Comparison of peak elution characteristics with Cr-Cl-H-O isotopologue mass abundances suggests mass-dependent sorting of isotopologues alone cannot explain intra-species fractionation, supporting a previously published proposal that preferential adsorption of light Cr isotopes on the resin is driven by vibrational energy effects. The transformation of CrCl2+ to CrCl2+ is faster than CrCl2+ to Cr3+ and the rates of both transformations increase with solution pH. Preferential reaction of light Cr(III) isotopes into product species occurs during each transformation, consistent with closed-system, kinetic fractionation during Cl-H2O ligand exchange. Inter-species fractionation is assessed using time-series experiments beginning from the dissolution of two Cr(III)-Cl solids (dried NIST SRM979 standard and commercial CrCl3·6H2O salt) in 0.01 M HCl (pH ≈ 2). The ε53/52Cr(CrCl2+/CrCl2+) for the CrCl2+ to CrCl2+ reaction is -0.19‰ (SRM979) and -0.38‰ (salt) and the ε53/52Cr(Cr3+/CrCl2+) for the CrCl2+ to Cr3+ reaction is consistent for both experiments at -0.49‰ (SRM979) and -0.51‰ (salt). Experiments where SRM979 is dissolved in 0.1 and 1 M HCl for a longer aging period provide preliminary evidence that the Cr3+/CrCl2+ Cr(III) isotopic fractionation scales with HCl concentration (transformation rate). Chromium(III) dissolved in 6 M HCl and aged 5 months still yields an inter-species Cr isotope distribution that is apparently inherited from kinetic effects (light Cr isotopes in Cr3+), attesting to the slow development of inter-species isotopic equilibrium, which instead predicts progressively heavier Cr isotopes from CrCl2+ to CrCl2+ to Cr3+. The kinetic Cr(III) isotopic fractionation documented herein is proposed to be relevant to understanding systems where aqueous Cr(III)-Cl species may be temporarily stable (e.g., metamorphic and hydrothermal systems or lateritic weathering). Further, the complexation of Cr(III) with other ligands (e.g., CO32-, organics), combined with additional kinetic effects of Cr(III) potentially occurring in soils or sediment, must be explored prior to establishing the significance of empirical stable Cr isotope signatures in marine and continental environments. Further understanding of non-redox effects may lead to stable Cr isotopes developing as a proxy for system pH or ligand chemistry.

Effect of Growth Rate on Elevated Temperature Plastic Flow and Room Temperature Fracture Toughness of Directionally Solidified NiAl-31Cr-3Mo

NASA Technical Reports Server (NTRS)

Whittenberger, J. Daniel; Raj, S. V.; Locci, I. E.; Salem, J. A.

1999-01-01

The eutectic system Ni-33Al-31Cr-3Mo was directionally solidified at rates ranging from 7.6 to 508 mm/h. Samples were examined for microstructure and alloy chemistry, compression tested at 1200 and 1300 K, and subjected to room temperature fracture toughness measurements. Lamellar eutectic grains were formed at 12.7 mm/h; however cellular structures with a radial eutectic pattern developed at faster growth rates. Elevated temperature compression testing between 10(exp -4) to 10(exp -7)/s did not reveal an optimum growth condition, nor did any single growth condition result in a significant fracture toughness advantage. The mechanical behavior, taken together, suggests that Ni-33Al-31Cr-3Mo grown at rates from 25.4 to 254 mm/h will have nominally equivalent properties.

High temperature wear performance of HVOF-sprayed Cr3C2-WC-NiCoCrMo and Cr3C2-NiCr hardmetal coatings

NASA Astrophysics Data System (ADS)

Zhou, Wuxi; Zhou, Kesong; Li, Yuxi; Deng, Chunming; Zeng, Keli

2017-09-01

A novel Cr3C2-WC-NiCoCrMo and commercial Cr3C2-NiCr thermal spray-grade powders with particle size of -45 + 15 μm were prepared by an agglomeration and sintering process. Cr3C2-WC-NiCoCrMo and Cr3C2-NiCr coatings were deposited by high velocity oxygen fuel (HVOF) spraying. The fundamental properties of both coatings were evaluated and friction wear test against Al2O3 counterbodies of both coatings at high temperatures (450 °C, 550 °C, 650 °C) were carried out ball-on-disk high temperature tribometer. All specimens were characterized by optical microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS) and 3D non-contact surface mapping profiler. The results have shown that the Cr3C2-WC-NiCoCrMo coating exhibited lower porosity, higher micro-hardness compared to the Cr3C2-NiCr coating. The Cr3C2-WC-NiCoCrMo coating also exhibited better wear resistance and higher friction coefficient compared to the Cr3C2-NiCr coating when sliding against the Al2O3 counterpart. Wear rates of both coatings increased with raising temperature. Both coatings experienced abrasive wear; hard phase particles (WC and Cr3C2) with different sizes, distributed in the matrix phase, will effectively improve the resistance against wear at high temperatures.

Cadmium, Chromium, and Copper Concentration plus Semen-Quality in Environmental Pollution Site, China

PubMed Central

LI, Yan; GAO, Qiaoyan; LI, Mingcai; LI, Mengyang; GAO, Xueming

2014-01-01

Abstract Background The environmental pollution is one of the factors contributing to the decrease of sperm quality for human beings. The aim of this study was to assess cadmium (Cd), chromium (Cr), and copper (Cu) concentration of man in environmental pollution site, and explore relationships between men exposure to Cd, Cr, and Cu and semen-quality parameters in environmental pollution site. Methods Ninety five men were recruited through pollution area and controls in 2011. We measured semen quality using Computer-aided Semen Quality Analysis, and Cd, Cr, and Cu levels in seminal plasma using Graphite Gurnace Atomic Absorption Spectroscopy. Spearman rank correlation analysis was used to evaluate the correlation between Cd, Cr and Cu concentration in seminal plasma and semen quality. Results The mean of seminal plasma Cd, Cr, and Cu values in pollution area was higher than the controls. Seminal plasma Cr values displayed a significant negative correlation with total motility and normomorph sperm rate. Seminal plasma Cu values also displayed a negative correlation with normomorph sperm rate. Conclusions Male reproductive health may be threatened by environmental pollution, and it may be influence local population diathesis. PMID:26060677

Effect of Cr2O3 Pickup on Dissolution of Lime in Converter Slag

NASA Astrophysics Data System (ADS)

Yan, Wei; Chen, Weiqing; Zhao, Xiaobo; Yang, Yindong; McLean, Alex

2017-09-01

Application of low-nickel laterite ore containing chromium as charging material for ironmaking can reduce raw material costs, but result in an increase of chromium content in the hot metal and hence, Cr2O3 content in the steelmaking slag, which subsequently causes many problems related to lime dissolution for the steelmaking operation. In this work, a rotating cylinder method was employed to study the effect of Cr2O3 on lime dissolution in steelmaking slag. The lime dissolution mechanism, rate control step and affecting factors, including slag basicity, FeOx and B2O3 content, and the formation of phases at reacted layer, were discussed. It was found that mass transfer was the rate control step in slag phase, increase of Cr2O3 and slag basicity delayed lime dissolution due to the formation of high-melting temperature phases of FeO · Cr2O3 spinel and 2CaO · SiO2 at the slag/lime reacted interface. Addition of B2O3 promoted lime dissolution and suppressed formation of FeO · Cr2O3 spinel.

Enhanced adsorption of congo red from aqueous solutions by chitosan hydrogel beads impregnated with cetyl trimethyl ammonium bromide.

PubMed

Chatterjee, Sudipta; Lee, Dae S; Lee, Min W; Woo, Seung H

2009-06-01

The adsorption of congo red (CR) onto chitosan (CS) beads impregnated by a cationic surfactant (CTAB, cetyl trimethyl ammonium bromide) was investigated. Chitosan beads impregnated at a ratio of 1/20 of CTAB to CS (0.05% of CTAB and 1% of CS) increased the CR adsorption capacity by 2.2 times from 162.3 mg/g (0% CTAB) to 352.5 mg/g (0.05% CTAB). The CR adsorption decreased with an increase in pH of the CR solution from 4.0 to 9.0. The Sips isotherm model showed a good fit with the equilibrium experimental data and the values of the heterogeneity factor (n) indicated heterogeneous adsorption of CR onto CS/CTAB beads, as well as CS beads. The kinetic data showed better fit to the pseudo second-order rate model than to the pseudo first-order rate model. The impregnation of CS beads by cationic surfactants showed the highest adsorption capacities of CR compared to any other adsorbents and would be a good method to increase adsorption efficiency for the removal of anionic dyes in a wastewater treatment process.

TiC reinforced cast Cr steels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dogan, O.N.; Hawk, J.A.; Schrems, K.K.

2006-06-01

A new class of materials, namely TiC-reinforced cast chromium (Cr) steels, was developed for applications requiring high abrasion resistance and good fracture toughness. The research approach was to modify the carbide structure of commercial AISI 440C steel for better fracture resistance while maintaining the already high abrasion resistance. The new alloys contained 12Cr, 2.5–4.5Ti, and 1–1.5C (wt.%) and were melted in a vacuum induction furnace. Their microstructure was composed primarily of a martensitic matrix with a dispersion of TiC precipitates. Modification of TiC morphology was accomplished through changing the cooling rate during solidification. Wear rates of the TiC-reinforced Cr steelsmore » were comparable to that of AISI 440C steel, but the impact resistance was much improved.« less

The effect of a Cr addition and transformation temperature on the mechanical properties of cold drawn hyper-eutectoid steel wires

NASA Astrophysics Data System (ADS)

Song, Hyung Rak; Kang, Eui Goo; Bae, Chul Min; Lee, Choong Yeol; Lee, Duk Lak; Nam, Won Jong

2006-06-01

The effects of a Cr addition and transformation temperature on the strength and work hardening behavior of cold drawn hyper-eutectoid steel wires are investigated in this study. The Cr addition was found to be effective for increasing the tensile strength and work hardening rate, k/(2 λ°)1/2, due to the refinement of the initial interlamellar spacing and the increment of the Hall-Petch parameter. While the work hardening rate, k/(2 λ°)1/2, was significantly influenced by the magnitude of the interlamellar spacing, the Hall-Petch parameter, k, was not affected by the interlamellar spacing. Additionally, the refinement of the interlamellar spacing due to the low transformation temperature and the Cr addition caused an increase of the RA in drawn pearlitic steels.

Removal of hexavalent chromium by biosorption process in rotating packed bed.

PubMed

Panda, M; Bhowal, A; Datta, S

2011-10-01

Removal of hexavalent chromium ions from an aqueous solution by crude tamarind (Tamarindus indica) fruit shell was examined in a rotating packed bed contactor by continuously recirculating a given volume of solution through the bed. Reduction of Cr(VI) to Cr(III) within the biosorbent appeared to be the removal mechanism. Depletion rate of Cr(VI) from, and release of reduced Cr(III) ions into the aqueous phase, was influenced by mass transfer resistance besides pH and packing depth. A mathematical model considering the reduction reaction to be irreversible and incorporating intraparticle and external phase mass transfer resistances represented the experimental data adequately. The study indicated that the limitations of fixed bed contactor operating under terrestrial gravity in intensifying mass transfer rates for this system can be overcome with rotating packed bed due to liquid flow under centrifugal acceleration.

Dynamic strain aging behavior of modified 9Cr-1Mo and reduced activation ferritic martensitic steels under low cycle fatigue

NASA Astrophysics Data System (ADS)

Mariappan, K.; Shankar, Vani; Sandhya, R.; Prasad Reddy, G. V.; Mathew, M. D.

2013-04-01

Influence of temperature and strain rate on low cycle fatigue (LCF) behavior of modified 9Cr-1Mo ferritic martensitic steel and 1.4W-0.06Ta reduced activation ferritic martensitic (RAFM) steel in normalized and tempered conditions was studied. Total strain controlled LCF tests between 300 and 873 K on modified 9Cr-1Mo steel and RAFM steel and at various strain rates on modified 9Cr-1Mo steel were performed at total strain amplitude of ±0.6%. Both the steels showed continuous cyclic softening at all temperatures. Whereas manifestations of dynamic strain aging (DSA) were observed in both the steels which decreased fatigue life at intermediate temperatures, at higher temperatures, oxidation played a crucial role in decreasing fatigue life.

Volatile products from the interaction of KCl(g) with Cr2O3 and LaCrO3 in oxidizing environments

NASA Technical Reports Server (NTRS)

Kohl, F. J.; Miller, R. A.; Stearns, C. A.; Fryburg, G. C.; Dillard, J. G.

1977-01-01

Cooled target collection techniques and high pressure mass spectrometric sampling were used to measure the relative rates of oxidative vaporization and to identify the volatile products emanating from samples of chromia and Mg-doped lanthanum chromite. The materials were exposed to partial pressures of KCl with and without H2O in one atmosphere of slowly flowing oxygen at elevated temperatures. Chromia and fresh samples of lanthanum chromite exhibited enhanced rates of oxidative vaporization upon exposure to these reactants. Mass spectrometric identification showed that the enhancements resulted from the heterogeneous formation of complex molecules of the type KCl sub 1,2,3 CrO3 and KOH sub l,2 CrO3. Lanthanum chromite that had undergone prolonged oxidative vaporization exhibited no enhanced oxidation upon exposure to the reactants.

Health information system linkage and coordination are critical for increasing access to secondary prevention in Aboriginal health: a qualitative study.

PubMed

Digiacomo, Michelle; Davidson, Patricia M; Taylor, Kate P; Smith, Julie S; Dimer, Lyn; Ali, Mohammed; Wood, Marianne M; Leahy, Timothy G; Thompson, Sandra C

2010-01-01

Aboriginal Australians have low rates of participation in cardiac rehabilitation (CR), despite having high rates of cardiovascular disease. Barriers to CR participation reflect multiple patient-related issues. However, an examination of the broader context of health service delivery design and implementation is needed. To identify health professionals' perspectives of systems related barriers to implementation of the National Health and Medical Research Council (NHMRC) guidelines Strengthening Cardiac Rehabilitation and Secondary Prevention for Aboriginal and Torres Strait Islander Peoples. Semi-structured interviews were conducted with health professionals involved in CR within mainstream and Aboriginal Community Controlled Health Services in Western Australia (WA). Thirty-eight health professionals from 17 services (ten rural, seven metropolitan) listed in the WA Directory of CR services and seven Aboriginal Medical Services in WA were interviewed. Respondents reported barriers encountered in health information management and the impact of access to CR services for Aboriginal people. Crucial issues identified by participants were: poor communication across the health care sector and between providers, inconsistent and insufficient data collection processes (particularly relating to Aboriginal ethnicity identification), and challenges resulting from multiple clinical information systems and incompatible technologies. This study has demonstrated that inadequate information systems and communication strategies, particularly those representing the interface between primary and secondary care, contribute to the low participation rates of Aboriginal Australians in CR. Although these challenges are shared by non-Aboriginal Australians, the needs are greater for Aboriginal Australians and innovative solutions are required.

Two feasible approaches to enhance the wear behaviors of NiCrBSi coating in atmosphere and aqueous environments

NASA Astrophysics Data System (ADS)

Ye, Yuwei; Wang, Chunting; Zheng, Wenru; Xiong, Wei; Wang, Yongxin; Li, Xiaogang

2017-09-01

NiCrBSi coating was deposited successfully on the surface of 316 stainless steel substrate by means of plasma spraying. The microstructures and mechanical property were analyzed by scanning electron microscopy, x-ray diffraction, and a Vickers hardness tester. The wear performances of the coatings sliding against the GCr15 ball under ambient air and water conditions were investigated, and two feasible approaches (tungsten carbide (WC)-doping and heat treatment) were used to improve the tribological performance. Results showed that the hardness of the NiCrBSi coating increased by 12.5% and 28.5% and the porosity decreased by 26.1% and 47.8%, respectively, after WC-doping and heat treatment. During dry friction, the friction coefficient and wear rate of the NiCrBSi coating were about 0.47 and 1.4  ×  10-5 mm3 N-1 m-1, respectively. These values were higher than those obtained on other coatings. In water conditions, all coatings showed a lower friction and wear rate than that in ambient air, which was as a result of the lubrication effect of water. Significantly, with WC-doping and heat treatment, the friction coefficients of both coatings were about 18.5% and 36.7%, respectively, lower than that of the NiCrBSi coating. Furthermore, the wear rates of both coatings were about 20% and 70%, respectively, lower than that of the NiCrBSi coating.

Low-cost, single-mode diode-pumped Cr:Colquiriite lasers.

PubMed

Demirbas, Umit; Li, Duo; Birge, Jonathan R; Sennaroglu, Alphan; Petrich, Gale S; Kolodziejski, Leslie A; Kaertner, Franz X; Fujimoto, James G

2009-08-03

We present three Cr3+:Colquiriite lasers as low-cost alternatives to Ti:Sapphire laser technology. Single-mode laser diodes, which cost only $150 each, were used as pump sources. In cw operation, with approximately 520 mW of absorbed pump power, up to 257, 269 and 266 mW of output power and slope efficiencies of 53%, 62% and 54% were demonstrated for Cr:LiSAF, Cr:LiSGaF and Cr:LiCAF, respectively. Record cw tuning ranges from 782 to 1042 nm for Cr:LiSAF, 777 to 977 nm for Cr:LiSGaF, and 754 to 871 nm for Cr:LiCAF were demonstrated. In cw mode-locking experiments using semiconductor saturable absorber mirrors at 800 and 850 nm, Cr:Colquiriite lasers produced approximately 50-100 fs pulses with approximately 1-2.5 nJ pulse energies at approximately 100 MHz repetition rate. Electrical-to-optical conversion efficiencies of 8% in mode-locked operation and 12% in cw operation were achieved.

Nano iron oxide impregnated in chitosan bead as a highly efficient sorbent for Cr(VI) removal from water.

PubMed

Lu, Jianbo; Xu, Kai; Yang, Jinmei; Hao, Yarong; Cheng, Fang

2017-10-01

Using Fe(III) salts and chitosan, nano iron oxide impregnated in chitosan bead (NIOC) was successfully synthesized for aqueous Cr(VI) detoxification via sol-gel technique without any additional crosslinking agent. NIOC characterization demonstrated that the iron in NIOC mainly existed as nano akaganeite (β-FeOOH) and complex with chitosan. Intraparticle diffusion was the major rate-limiting step. The maximal adsorption capacity was 69.8mg/g (pH 5.0, 20°C). Normal concentration of coexisting anions (SO 4 2- , CO 3 2- , SiO 3 2 -) showed insignificant competition, whereas PO 4 3- suppressed the Cr(VI) sorption. Cr(VI)-loaded NIOC could be effectively regenerated by alkaline solutions. Column adsorption runs using granular NIOC could effectively treat about 1600 bed volumes of Cr(VI) solution (from 3.7mg Cr/L in influent to <0.5mg Cr/L in effluent). The Cr(VI) removal mechanisms involved the direct sorption of Cr(VI) (electrostatic attraction and ligand exchange), reduction of Cr(VI) into Cr(III) and re-sorption of Cr(III) via chelation on NIOC surface. Copyright © 2017 Elsevier Ltd. All rights reserved.

Anion-exchange high-performance liquid chromatography of water-soluble chromium (VI) and chromium (III) complexes in biological materials.

PubMed

Suzuki, Y

1987-04-10

A high-performance anion-exchange liquid chromatograph coupled to visible-range (370 nm) and UV (280 nm) detectors and an atomic-absorption spectrometer allowed the rapid determination of CrVI and/or complexes of CrIII in rat plasma, erythrocyte lysate and liver supernatant treated with CrVI or CrIII in vitro. CrVI in the eluates was determined using both the visible-range detector and atomic-absorption spectrometer (AAS). The detection limits of CrVI in standard solutions using these methods were 2 and 5 ng (signal-to-noise ratio = 2), respectively. Separations of the biological components and of CrIII complexes were monitored by UV and AAS analyses, respectively. Time-related decreases of CrVI accompanied by increases in CrIII complexes were observed, indicating the reduction of CrVI by some of the biological components. The reduction rates were considerably higher in the liver supernatant and erythrocyte lysate than in the plasma. These results indicate that the anion-exchange high-performance liquid chromatographic system is useful for simultaneous determination of CrVI and CrIII complexes in biological materials.

The effect of extreme ionization rates during the initial collapse of a molecular cloud core

NASA Astrophysics Data System (ADS)

Wurster, James; Bate, Matthew R.; Price, Daniel J.

2018-05-01

What cosmic ray ionization rate is required such that a non-ideal magnetohydrodynamics (MHD) simulation of a collapsing molecular cloud will follow the same evolutionary path as an ideal MHD simulation or as a purely hydrodynamics simulation? To investigate this question, we perform three-dimensional smoothed particle non-ideal MHD simulations of the gravitational collapse of rotating, one solar mass, magnetized molecular cloud cores, which include Ohmic resistivity, ambipolar diffusion, and the Hall effect. We assume a uniform grain size of ag = 0.1 μm, and our free parameter is the cosmic ray ionization rate, ζcr. We evolve our models, where possible, until they have produced a first hydrostatic core. Models with ζcr ≳ 10-13 s-1 are indistinguishable from ideal MHD models, and the evolution of the model with ζcr = 10-14 s-1 matches the evolution of the ideal MHD model within 1 per cent when considering maximum density, magnetic energy, and maximum magnetic field strength as a function of time; these results are independent of ag. Models with very low ionization rates (ζcr ≲ 10-24 s-1) are required to approach hydrodynamical collapse, and even lower ionization rates may be required for larger ag. Thus, it is possible to reproduce ideal MHD and purely hydrodynamical collapses using non-ideal MHD given an appropriate cosmic ray ionization rate. However, realistic cosmic ray ionization rates approach neither limit; thus, non-ideal MHD cannot be neglected in star formation simulations.

Low-threshold, nanosecond, high-repetition-rate vortex pulses with controllable helicity generated in Cr,Nd:YAG self-Q-switched microchip laser

NASA Astrophysics Data System (ADS)

He, Hong-Sen; Chen, Zhen; Li, Hong-Bin; Dong, Jun

2018-05-01

A high repetition rate, nanosecond, pulsed optical vortex beam has been generated in a Cr,Nd:YAG self-Q-switched microchip laser pumped by the annular-beam formed with a hollow focus lens. The lasing threshold for vortex pulses is 0.9 W. A pulse width of 6.5 ns and a repetition rate of over 330 kHz have been achieved. The average output power of 1 W and the slope efficiency of 46.6% have been obtained. The helicity of the optical vortices has been controlled by adjusting the tilted angle between Cr,Nd:YAG crystal and output coupler. The work provides a new method for developing pulsed optical vortices for potential applications on quantum communication and optical trapping.

Dynamics and Steady States in Excitable Mobile Agent Systems

NASA Astrophysics Data System (ADS)

Peruani, Fernando; Sibona, Gustavo J.

2008-04-01

We study the spreading of excitations in 2D systems of mobile agents where the excitation is transmitted when a quiescent agent keeps contact with an excited one during a nonvanishing time. We show that the steady states strongly depend on the spatial agent dynamics. Moreover, the coupling between exposition time (ω) and agent-agent contact rate (CR) becomes crucial to understand the excitation dynamics, which exhibits three regimes with CR: no excitation for low CR, an excited regime in which the number of quiescent agents (S) is inversely proportional to CR, and, for high CR, a novel third regime, model dependent, where S scales with an exponent ξ-1, with ξ being the scaling exponent of ω with CR.

Comparison between L-CHOP and an L-CHOP protocol with interposed treatments of CCNU and MOPP (L-CHOP-CCNU-MOPP) for lymphoma in dogs.

PubMed

Rassnick, K M; Bailey, D B; Malone, E K; Intile, J L; Kiselow, M A; Flory, A B; Barlow, L L; Balkman, C E; Barnard, S M; Waite, A H

2010-12-01

An L-CHOP protocol with interposed treatments of CCNU and MOPP (L-CHOP-CCNU-MOPP) was evaluated in 66 dogs with stages III-V lymphoma. Results were compared with a historical group of 71 dogs treated with an L-CHOP protocol. Complete remission (CR) rates (85 and 80%, respectively) did not differ significantly between protocols (P = 0.48). First CR duration for dogs treated with L-CHOP-CCNU-MOPP was significantly longer: median, 317 days; 2-year CR rate, 35% versus median, 298 days; 2-year CR rate, 13%, P = 0.05). For the L-CHOP-CCNU-MOPP protocol, dogs in substage-b had a 4.3 times greater hazard of having a relapse than dogs in substage-a (P = 0.002). Frequency of adverse chemotherapy-associated gastrointestinal effects did not differ between protocols (P = 0.77). Neutropenia (primarily after CCNU) occurred more frequently in dogs treated with L-CHOP-CCNU-MOPP (P < 0.001). In summary, the L-CHOP-CCNU-MOPP protocol showed an improved duration of first CR as compared with an L-CHOP protocol, but the relevance of this finding might be subject to clinical judgement. © 2010 Blackwell Publishing Ltd.

Toxicity of porcelain-fused-to-metal substrate to zebrafish (Danio rerio) embryos and larvae.

PubMed

Zhao, Libo; Si, Jing; Wei, Yuan; Li, Sirui; Jiang, Yanjiao; Zhou, Rong; Liu, Bin; Zhang, Hong

2018-06-15

Porcelain-fused-to-metal (PFM) crowns are a standard restoration technique in dentistry, but toxicity of PFM in vivo has not been systematically evaluated. The present study evaluated the effects of various metal alloy shells of PFM crowns on the development of zebrafish embryos and larvae in order to determine the safety of these materials. Gold palladium (Au-Pd), silver palladium (Ag-Pd), Nickel chromium (Ni-Cr), cobalt chromium (Co-Cr), titanium (Ti) alloy porcelain crowns were immersed in artificial saliva for 1, 4, and 7 weeks, and the leach solution was collected and used to treat zebrafish embryos at 4-144 h PFM. Toxicity was assessed based on mortality, spontaneous movement, heart rate, hatchability, malformation, and swimming behavior. The 1-week leachates of the five PFMs were not toxic to zebrafish. The rates of mortality and malformation of zebrafish in the Ni-Cr alloy group were increased whereas spontaneous movement, heart rate, and swimming behavior were decreased for 4- and 7-week leachates. Among metal substrates commonly used in dental work, Ni-Cr alloy was most toxic, followed by Co-Cr and Ag-Pd alloys. Ti and Au-Pd alloys showed good biocompatibility and are therefore the most suitable materials for clinical applications. Copyright © 2018 Elsevier Inc. All rights reserved.

Impact of corrosion test container material in molten fluorides

DOE PAGES

Olson, Luke C.; Fuentes, Roderick E.; Martinez-Rodriguez, Michael J.; ...

2015-10-15

The effects of crucible material choice on alloy corrosion rates in immersion tests in molten LiF–NaF–KF (46.5–11.5-42 mol. %) salt held at 850 °C for 500 hrs are described. Four crucible materials were studied. Molten salt exposures of Incoloy-800H in graphite, Ni, Incoloy-800H, and pyrolytic boron nitride (PyBN) crucibles all led to weight-loss in the Incoloy-800H coupons. Alloy weight loss was ~30 times higher in the graphite and Ni crucibles in comparison to the Incoloy-800H and PyBN crucibles. It is hypothesized galvanic coupling between the alloy coupons and crucible materials contributed to the higher corrosion rates. Alloy salt immersion inmore » graphite and Ni crucibles had similar weight-loss hypothesized to occur due to the rate limiting out diffusion of Cr in the alloys to the surface where it reacts with and dissolves into the molten salt, followed by the reduction of Cr from solution at the molten salt and graphite/Ni interfaces. As a result, both the graphite and the Ni crucibles provided sinks for the Cr, in the formation of a Ni–Cr alloy in the case of the Ni crucible, and Cr carbide in the case of the graphite crucible.« less

Development of improved high temperature coatings for IN-792 + HF

NASA Technical Reports Server (NTRS)

Profant, D. D.; Naik, S. K.

1981-01-01

The development for t-55 l712 engine of high temperature for integral turbine nozzles with improved thermal fatigue resistance without sacrificing oxidation/corrosion protection is discussed. The program evaluated to coating systems which comprised one baseline plasma spray coating (12% Al-NiCoCrALY), three aluminide coatings including the baseline aluminide (701), two CoNiCrAly (6% Al) + aluminide systems and four NiCoCrY + aluminide coating were evaluated. The two-step coating processes were investigated since it offered the advantage of tailoring the composition as well as properly coating surfaces of an integral or segmented nozzle. Cyclic burner rig thermal fatigue and oxidation/corrosion tests were used to evaluate the candidate coating systems. The plasma sprayed 12% Al-NiCoCrAlY was rated the best coating in thermal fatigue resistance and outperformed all coatings by a factor between 1.4 to 2.5 in cycles to crack initiation. However, this coatings is not applicable to integral or segmented nozzles due to the line of sight limitation of the plasma spray process. The 6% Al-CoNiCrAlY + Mod. 701 aluminide (32 w/o Al) was rated the best coating in oxidation/corrosion resistance and was rated the second best in thermal fatigue resistance.

Effect of Alloying Additions on Oxidation Behaviors of Ni-Fe Based Superalloy for Ultra-Supercritical Boiler Applications

NASA Astrophysics Data System (ADS)

Lu, Jintao; Yang, Zhen; Zhao, Xinbao; Yan, Jingbo; Gu, Y.

A new kind of Ni-Fe-based superalloy is designed recently for 750 °C-class A-USC boiler tube. The oxidation behavior of the designed alloys with various combinations of anti-oxidation additions, Cr, Al and Si, was investigated at 750 °C and 850 °C, respectively. The results indicated that the oxidation rate of tested alloys decreased with the increase of the sum of additions. Cr addition may drop the relative constant of parabolic rate greatly when temperature is raised. But the oxide scale, mainly consisted of NiCr spinel at 750 °C and NiCrMn spinel at 850 °C, was similar while the Cr content is in a range of 20-25 wt.% at tested temperatures. Al addition, however, showed the best effective to reduce the oxidation rates. Internal Al-rich oxide was observed at the scale/metal interface for alloys added with high content of Al and was increased with Al content increase. Very tiny difference between the oxide scales of the Si-added alloys was identified when Si content varies among 0.02-0.05 wt.%. Basing on these results, this presentation discussed the optimum combination of anti-oxidation additions as well as oxidation mechanisms in the designed Ni-Fe-base superalloy.

The Effects of the Combination of Cognitive Training and Supported Employment on Improving Clinical and Working Outcomes for People with Schizophrenia in Japan

PubMed Central

Sato, Sayaka; Iwata, Kazuhiko; Furukawa, Shun-Ichi; Matsuda, Yasuhiro; Hatsuse, Norifumi; Ikebuchi, Emi

2014-01-01

Background: In Japan, Job assistance for SMI have been not active. Compared with mental retardation, employment rate of SMI was low. The needs of the effective job assistance for SMI are growing. The purpose of this study was to determine the effectiveness of the combination approach of Cognitive Remediation (CR) and Supported Employment (SE) in clinical outcomes, including cognitive functioning and psychiatric symptoms besides vocational outcomes. Methods: The participants diagnosed with schizophrenia or schizoaffective disorder were assigned to CR+SE group (n=52) and SE group (n=57). CR comprised computer based trainings using COGPACK and group works. SE was individualized vocational support provided by employment specialists. Outcome measures included cognitive functioning, psychiatric symptoms, social functioning, performance of tasks as clinical outcomes, employment rate, duration of employment, and earned wage as vocational outcome. Results: CR+SE group displayed significantly better psychiatric symptoms (F=3.490, p<.10), interpersonal relations (F=11.695, p<.01), and social and cognitive functioning including verbal memory (F=9.439, p<.01), digit sequencing (F=5.544, p<.05), token motor tasks (F=6.685, p<.05), and overall cognitive functioning (F=8.136, p<.01). We did not find any significant difference between two groups in terms of employment rate and earned wage. Discussions: This is the first controlled study to determine the effectiveness of CR on vocational outcomes in Japan. The results showed that CR and SE programs were feasible in Japan and that CR using COGPACK had favorable effects on cognitive functioning, psychiatric symptoms, and social functioning, which is consistent with previous researches. PMID:24600481

High temperature tensile and creep behaviour of low pressure plasma-sprayed Ni-Co-Cr-Al-Y coating alloy

NASA Technical Reports Server (NTRS)

Hebsur, M. G.; Miner, R. V.

1986-01-01

The high temperature tensile and creep behavior of low pressure plasma-sprayed plates of a typical Ni-Co-Cr-Al-Y alloy has been studied. From room temperature to 800 K, the Ni-Co-Cr-Al-Y alloy studied has nearly a constant low ductility and a high strength. At higher temperatures, it becomes weak and highly ductile. At and above 1123 K, the behavior is highly dependent on strain rate and exhibits classic superplastic characteristics with a high ductility at intermediate strain rates and a strain rate sensitivity of about 0.5. At either higher or lower strain rates, the ductility decreases and the strain rate sensitivities are about 0.2. In the superplastic deformation range, the activation energy for creep is 120 + or - 20 kJ/mol, suggesting a diffusion-aided grain boundary sliding mechanism. Outside the superplastic range, the activation energy for creep is calculated to be 290 + or - 20 kJ/mol.

Crack Free Tungsten Carbide Reinforced Ni(Cr) Layers obtained by Laser Cladding

NASA Astrophysics Data System (ADS)

Amado, J. M.; Tobar, M. J.; Yáñez, A.; Amigó, V.; Candel, J. J.

The development of hardfacing coatings has become technologically significant in many industries A common approach is the production of metal matrix composites (MMC) layers. In this work NiCr-WC MMC hardfacing layers are deposited on C25 steel by means of laser cladding. Spheroidal fused tungsten carbides is used as reinforcement phase. Three different NiCr alloys with different Cr content were tested. Optimum conditions to obtain dense, uniform carbide distribution and hardness close to nominal values were defined. The effect of Cr content respect to the microstructure, susceptibility for cracking and the wear rate of the resulting coating will also be discussed.

Mitoxantrone, etoposide and cytarabine following epigenetic priming with decitabine in adults with relapsed/refractory acute myeloid leukemia or other high-grade myeloid neoplasms: a phase 1/2 study.

PubMed

Halpern, A B; Othus, M; Huebner, E M; Buckley, S A; Pogosova-Agadjanyan, E L; Orlowski, K F; Scott, B L; Becker, P S; Hendrie, P C; Chen, T L; Percival, M-E M; Estey, E H; Stirewalt, D L; Walter, R B

2017-12-01

DNA methyltransferase inhibitors sensitize leukemia cells to chemotherapeutics. We therefore conducted a phase 1/2 study of mitoxantrone, etoposide and cytarabine following 'priming' with 5-10 days of decitabine (dec/MEC) in 52 adults (median age 55 (range: 19-72) years) with relapsed/refractory acute myeloid leukemia (AML) or other high-grade myeloid neoplasms. During dose escalation in cohorts of 6-12 patients, all dose levels were well tolerated. As response rates appeared similar with 7 and 10 days of decitabine, a 7-day course was defined as the recommended phase 2 dose (RP2D). Among 46 patients treated at/above the RP2D, 10 (22%) achieved a complete remission (CR), 8 without measurable residual disease; five additional patients achieved CR with incomplete platelet recovery, for an overall response rate of 33%. Seven patients (15%) died within 28 days of treatment initiation. Infection/neutropenic fever, nausea and mucositis were the most common adverse events. While the CR rate compared favorably to a matched historic control population (observed/expected CR ratio=1.77), CR rate and survival were similar to two contemporary salvage regimens used at our institution (G-CLAC (granulocyte colony-stimulating factor (G-CSF); clofarabine; cytarabine) and G-CLAM (G-CSF; cladribine; cytarabine; mitoxantrone)). Thus, while meeting the prespecified efficacy goal, we found no evidence that dec/MEC is substantially better than other cytarabine-based regimens currently used for relapsed/refractory AML.

Helicobacter pylori Eradication Therapy Is Effective as the Initial Treatment for Patients with H. pylori-Negative and Disseminated Gastric Mucosa-Associated Lymphoid Tissue Lymphoma

PubMed Central

Gong, Eun Jeong; Ahn, Ji Yong; Jung, Hwoon-Yong; Park, Hyungchul; Ko, Young Bo; Na, Hee Kyong; Jung, Kee Wook; Kim, Do Hoon; Lee, Jeong Hoon; Choi, Kee Don; Song, Ho June; Lee, Gin Hyug; Kim, Jin-Ho

2016-01-01

Background/Aims We investigated the effectiveness of Helicobacter pylori eradication therapy for gastric mucosa-associated lymphoid tissue (MALT) lymphoma regardless of the H. pylori infection status or disease stage. Methods From November 1995 to September 2014, 345 subjects who were diagnosed with gastric MALT lymphoma and had received eradication therapy as their first-line treatment were eligible for inclusion in this study. A retrospective review was performed using the medical records. Results Of the 345 patients, H. pylori infection was detected in 317 patients (91.9%). The complete remission (CR) rate after eradication therapy was 82.3%, which was higher in H. pylori-positive patients than in H. pylori-negative patients (84.5% vs 57.1%, p=0.001). CR rates after eradication did not present significant differences between stages, and the CR rate was 83.3% for stage IE1 and 74.4% for stage IE2 or above (p=0.167). The overall CR rate was 87.2% after additional treatment, and neither H. pylori infection status nor stage showed differences according to the treatment response. Conclusions Eradication therapy led to CR in 57.1% of H. pylori-negative patients and in 74.4% of patients with stage IE2 or above. Eradication therapy is worthwhile as an initial treatment for gastric MALT lymphoma regardless of the H. pylori infection status and stage. PMID:27114423

Phase II study of neoadjuvant treatment with doxorubicin, docetaxel, and capecitabine (ATX) in locally advanced or inflammatory breast cancer.

PubMed

Manga, Gumersindo Pérez; Shahi, Parham Khosravi; Ureña, Miguel Méndez; Pereira, Rosa Quiben; Plaza, María Isabel Palomero; Peron, Yann Izarzugaza; Val, Ricardo González Del; Carrión, Joaquín Belón; Cañón, Esperanza Pérez; Alfonso, Pilar García

2010-07-01

Pathologic complete response (pCR) after preoperative systemic chemotherapy (PSCh) is associated with better outcome in locally advanced breast cancer (LABC). PSCh included: doxorubicin (A) 50 mg/m(2) i.v. on day 1; docetaxel (T) 30 mg/m(2) i.v. on days 1, 8 and 15; and capecitabine (X) 1,500 mg/m(2)/day p.o. on days 1-14, in a 4-week course repeated for up to four cycles (ATX), followed by surgery. The primary end point of this study was to evaluate the pCR rate. Secondary endpoints included clinical response rate, disease-free survival (DFS), overall survival (OS), and the toxicity profile. A total of 60 patients were included in the analysis. Median age was 49 years, and 63.3% of patients were hormone receptor positive. The median number of cycles of PSCh was four (95% CI: 3-4). Five patients (8.3%) achieved pCR in both breast and nodes, and 16.7% reached pCR only in nodes. The clinical response rate was 77% (27% complete response), but only 18% of the patients underwent conservative surgery. With a median follow-up of 20 months, 3-year DFS and OS were 76 and 90%, respectively. Grade III/IV toxicity included neutropenia (74%), febrile neutropenia (9%), mucositis (12%), and diarrhea (12%). ATX every 28 days for four cycles is associated with a modest activity (low pCR rate) in the neoadjuvant setting of LABC.

Mach 1 oxidation of thoriated nickel chromium at 1204 C (2200 F)

NASA Technical Reports Server (NTRS)

Lowell, C. E.; Sanders, W. A.

1971-01-01

TD NiCr was exposed to a Mach 1, 1-atmosphere gas stream at 1204 C for times up to 50 hours. Weight change, metal thickness loss, X-ray diffraction, metallographic, and electron microprobe analyses were made. Neither surface preparation nor thermal cycling had an appreciable effect on the results. Initially, Cr2O3 formed and volatilized, allowing a rapid metal loss rate of 40 microns per hour. After about 1 hour the Cr2O3 broke down, resulting in an NiO overgrowth. The metal loss rate then slowed to 2.5 microns per hour and remained constant to 50 hours.

Caloric restriction improves efficiency and capacity of the mitochondrial electron transport chain in Saccharomyces cerevisiae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Joon-Seok; Choi, Kyung-Mi; Lee, Cheol-Koo, E-mail: cklee2005@korea.ac.kr

2011-06-03

Highlights: {yields} Calorie restriction (CR) increases electron transport chain (ETC) at both RNA and protein level. {yields} CR enhances mitochondrial membrane potential, and, regardless of ages, reduces reactive oxygen species. {yields} CR increases both efficiency and capacity of the ETC. {yields} CR induces intensive modulation at mitochondrial ETC where might be a major site leading to extension of lifespan. -- Abstract: Caloric restriction (CR) is known to extend lifespan in a variety of species; however, the mechanism remains unclear. In this study, we found that CR potentiated the mitochondrial electron transport chain (ETC) at both the transcriptional and translational levels.more » Indeed, mitochondrial membrane potential (MMP) was increased by CR, and, regardless of ages, overall reactive oxygen species (ROS) generation was decreased by CR. With these changes, overall growth rate of cells was maintained under various CR conditions, just like cells under a non-restricted condition. All of these data support increased efficiency and capacity of the ETC by CR, and this change might lead to extension of lifespan.« less

Kinetics and Products of Chromium(VI) Reduction by Iron(II/III)-Bearing Clay Minerals.

PubMed

Joe-Wong, Claresta; Brown, Gordon E; Maher, Kate

2017-09-05

Hexavalent chromium is a water-soluble pollutant, the mobility of which can be controlled by reduction of Cr(VI) to less soluble, environmentally benign Cr(III). Iron(II/III)-bearing clay minerals are widespread potential reductants of Cr(VI), but the kinetics and pathways of Cr(VI) reduction by such clay minerals are poorly understood. We reacted aqueous Cr(VI) with two abiotically reduced clay minerals: an Fe-poor montmorillonite and an Fe-rich nontronite. The effects of ionic strength, pH, total Fe content, and the fraction of reduced structural Fe(II) [Fe(II)/Fe(total)] were examined. The last variable had the largest effect on Cr(VI) reduction kinetics: for both clay minerals, the rate constant of Cr(VI) reduction varies by more than 3 orders of magnitude with Fe(II)/Fe(total) and is described by a linear free energy relationship. Under all conditions examined, Cr and Fe K-edge X-ray absorption near-edge structure spectra show that the main Cr-bearing product is a Cr(III)-hydroxide and that Fe remains in the clay structure after reacting with Cr(VI). This study helps to quantify our understanding of the kinetics of Cr(VI) reduction by Fe(II/III)-bearing clay minerals and may improve predictions of Cr(VI) behavior in subsurface environments.

Caloric restriction in lean and obese strains of laboratory rat: effects on body composition, metabolism, growth and overall health.

PubMed

Aydin, C; Jarema, K A; Phillips, P M; Gordon, C J

2015-11-01

What is the central question of this study? How do lean and obese rats respond physiologically to caloric restriction? What is the main finding and its importance? Obese rats show marked benefits compared with lean animals. Reduced body fat is associated with improved longevity with caloric restriction (CR) in rodents. Little is known regarding effects of CR in genetically lean versus obese strains. Long-Evans (LE) and Brown Norway (BN) rats make an ideal comparison for a CR study because the percentage body fat of young adult LE rats is double that of BN rats. Male LE and BN rats were either fed ad libitum (AL) or were calorically restricted to 80 or 90% of their AL weight. The percentages of fat, lean and fluid mass were measured non-invasively at 2- to 4-week intervals. Metabolic rate and respiratory quotient were measured after 3, 6, 9 and 12 months of CR. Overall health was scored monthly. The percentage of fat of the LE strain decreased with CR, whereas the percentage of fat of the BN strain remained above the AL group for several months. The percentage of lean mass increased above the AL for both strains subjected to CR. The percentage of fluid was unaffected by CR. The average metabolic rate over 22 h of the BN rats subjected to CR was reduced, whereas that of LE rats was increased slightly above the AL group. The respiratory quotient of BN rats was decreased with CR. Overall health of the CR LE group was significantly improved compared with that of the AL group, whereas health of the CR BN rats was impaired compared with the AL group. Overall, the lean BN and obese LE strains differ markedly in fat utilization and metabolic response to prolonged CR. There appears to be little benefit of CR in the lean strain. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Monitoring creatine and phosphocreatine by (13)C MR spectroscopic imaging during and after (13)C4 creatine loading: a feasibility study.

PubMed

Janssen, Barbara H; Lassche, Saskia; Hopman, Maria T; Wevers, Ron A; van Engelen, Baziel G M; Heerschap, Arend

2016-08-01

Creatine (Cr) supplementation to enhance muscle performance shows variable responses among individuals and different muscles. Direct monitoring of the supplied Cr in muscles would address these differences. In this feasibility study, we introduce in vivo 3D (13)C MR spectroscopic imaging (MRSI) of the leg with oral ingestion of (13)C4-creatine to observe simultaneously Cr and phosphocreatine (PCr) for assessing Cr uptake, turnover, and the ratio PCr over total Cr (TCr) in individual muscles. (13)C MRSI was performed of five muscles in the posterior thigh in seven subjects (two males and two females of ~20 years, one 82-year-old male, and two neuromuscular patients) with a (1)H/(13)C coil in a 3T MR system before, during and after intake of 15 % (13)C4-enriched Cr. Subjects ingested 20 g Cr/day for 4 days in four 5 g doses at equal time intervals. The PCr/TCr did not vary significantly during supplementation and was similar for all subjects and investigated muscles (average 0.71 ± 0.07), except for the adductor magnus (0.64 ± 0.03). The average Cr turnover rate, assessed in male muscles, was 2.1 ± 0.7 %/day. The linear uptake rates of Cr were variable between muscles, although not significantly different. This assessment was possible in all investigated muscles of young male volunteers, but less so in muscles of the other subjects due to lower signal-to-noise ratio. Improvements for future studies are discussed. In vivo (13)C MRSI after (13)C-Cr ingestion is demonstrated for longitudinal studies of Cr uptake, turnover, and PCr/TCr ratios of individual muscles in one exam.

The Effect of Powder Ball Milling on the Microstructure and Mechanical Properties of Sintered Fe-Cr-Mo-Mn-(Cu) Steel

NASA Astrophysics Data System (ADS)

Kulecki, P.; Lichańska, E.

2017-12-01

The effect of ball milling powder mixtures of Höganäs pre-alloyed iron Astaloy CrM, low-carbon ferromanganese Elkem, elemental electrolytic Cu and C-UF graphite on the sintered structure and mechanical properties was evaluated. The mixing was conducted using Turbula mixer for 30 minutes and CDI-EM60 frequency inverter for 1 and 2 hours. Milling was performed on 150 g mixtures with (in weight %) CrM + 1% Mn, CrM + 2% Mn, CrM + 1% Mn + 1% Cu and CrM + 2% Mn + 1% Cu, all with 0.6%C. The green compacts were single pressed at 660 MPa according to PN-EN ISO 2740. Sintering was carried out in a laboratory horizontal furnace Carbolite STF 15/450 at 1250°C for 60 minutes in 5%H2 - 95%N2 atmosphere with a heating rate of 75°C/min, followed by sintering hardening at 60°C/min cooling rate. All the steels were characterized by martensitic structures. Mechanical testing revealed that steels based on milled powders have slightly higher mechanical properties compared to those only mixed and sintered. The best combination of mechanical properties, for ball milled CrM + 1% Mn + 1% Cu was UTS 1046 MPa, TRS 1336 MPa and A 1.94%.

Hexavalent chromium adsorption from aqueous solution using carbon nano-onions (CNOs).

PubMed

Sakulthaew, Chainarong; Chokejaroenrat, Chanat; Poapolathep, Amnart; Satapanajaru, Tunlawit; Poapolathep, Saranya

2017-10-01

The capacity of carbon nano-onions (CNOs) to remove hexavalent chromium (Cr(VI)) from aqueous solution was investigated. Batch experiments were performed to quantify the effects of the dosage rate, pH, counter ions, and temperature. The adsorption of Cr(VI) onto CNOs was best described by a pseudo-second order rate expression. The adsorption efficiency increased with increasing adsorbent dosage and contact time and reached equilibrium in 24 h. The equilibrium data showed better compliance with a Langmuir isotherm than a Freundlich isotherm. Effective removal of Cr(VI) was demonstrated at pH values ranging from 2 to 10. The adsorption capacity of Cr(VI) was found to be highest (82%) at pH 3.4 and greatly depended on the solution pH. We found that Cr(VI) adsorption decreased with increasing pH over the pH range of 3.4-10. The adsorption capacity increased dramatically when the temperature increased from 10 °C to 50 °C regardless of the amount of CNOs used. Cr(VI) removal decreased by ∼13% when Zn(II), Cu(II), and Pb(II) were present, while there were no significant changes observed when NO 3 - or SO 4 2- was present. The overall results support that CNOs can be used as an alternative adsorbent material to remove Cr(VI) in the water treatment industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of Cooling Rate on Microstructure of Two Kinds of High Nb Containing Tial Alloys

NASA Astrophysics Data System (ADS)

Chai, L. H.; Feng, Z. Y.; Xiang, Z. L.; Cui, Y. S.; Zhou, F.; Chen, Z. Y.

2017-09-01

In this paper, high Nb-TiAl alloys with Cr and W additions were prepared by Vacuum induction melting method, and then were heat treated under three different cooling rates of slow cooling, furnace cooling and air cooling. The phase composition of the alloy was analyzed by X ray diffraction, and the microstructure of the alloy was observed by optical microscope (OM), scanning electron microscope (SEM) and energy dispersive analyzer. The results show that the microstructure of Ti45Al8Nb0.2Cr and Ti45Al8Nb0.2W are fully lamellar structure with the main phase composition of α+γ after 3 different heat treatment conditions. The grain size of the two alloys decreases with decreasing of cooling rate, and the grain size of the alloyed with Cr alloy is smaller than that of the alloyed with W alloy. Most of the original massive β phase at grain boundaries and lamellar interfaces dissolved after heat treatment, and the transformation of β phase is easier for Ti45Al8Nb0.2Cr.

Drain Management after Pancreatoduodenectomy: Reappraisal of a Prospective Randomized Trial Using Risk Stratification.

PubMed

McMillan, Matthew T; Malleo, Giuseppe; Bassi, Claudio; Butturini, Giovanni; Salvia, Roberto; Roses, Robert E; Lee, Major K; Fraker, Douglas L; Drebin, Jeffrey A; Vollmer, Charles M

2015-10-01

A recent randomized trial used the Fistula Risk Score (FRS) to develop guidelines for selective drainage based on clinically relevant fistula (CR-POPF) risk. Additionally, postoperative day (POD) 1 drain and serum amylase have been identified as accurate postoperative predictors of CR-POPF. This study sought to identify patients who may benefit from selective drainage, as well as the optimal timing for drain removal after pancreatoduodenectomy. One hundred six pancreatoduodenectomies from a previously reported RCT were assessed using risk-adjustment. The incidence of CR-POPF was compared between FRS risk cohorts. Drain and serum amylase values from POD 1 were evaluated using receiver operating characteristic (ROC) analysis to establish cut-offs predictive of CR-POPF occurrence. A regression analysis compared drain removal randomizations (POD 3 vs POD 5). Three-quarters of patients had moderate/high CR-POPF risk. This group had a CR-POPF rate of 36.3% vs 7.7% among negligible/low risk patients (p = 0.005). The areas under the ROC curve for CR-POPF prediction using POD 1 drain and serum amylase values were 0.800 (p = 0.000001; 95% CI 0.70-0.90) and 0.655 (p = 0.012; 95% CI 0.55-0.77), respectively. No significant serum amylase cut-offs were identified. Moderate/high risk patients with POD 1 drain amylase ≤ 5,000 U/L had significantly lower rates of CR-POPF when randomized to POD 3 drain removal (4.2% vs 38.5%; p = 0.003); moreover, these patients experienced fewer complications and shorter hospital stays. A clinical care protocol is proposed whereby drains are recommended for moderate/high FRS risk patients, but may be omitted in patients with negligible/low risk. Drain amylase values in moderate/high risk patients should then be evaluated on POD 1 to determine the optimal timing for drain removal. Moderate/high risk patients with POD 1 drain amylase ≤ 5,000 U/L have lower rates of CR-POPF with POD 3 (vs POD ≥ 5) drain removal; early drain removal is recommended for these patients. Copyright © 2015 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Chromium silicide formation by ion mixing

NASA Technical Reports Server (NTRS)

Shreter, U.; So, F. C. T.; Nicolet, M.-A.

1984-01-01

The formation of CrSi2 by ion mixing was studied as a function of temperature, silicide thickness and irradiated interface. Samples were prepared by annealing evaporated couples of Cr on Si and Si on Cr at 450 C for short times to form Si/CrSi2/Cr sandwiches. Xenon beams with energies up to 300 keV and fluences up to 8 x 10 to the 15th per sq cm were used for mixing at temperatures between 20 and 300 C. Penetrating only the Cr/CrSi2 interface at temperatures above 150 C induces further growth of the silicide as a uniform stoichiometric layer. The growth rate does not depend on the thickness of the initially formed silicide at least up to a thickness of 150 nm. The amount of growth depends linearly on the density of energy deposited at the interface. The growth is temperature dependent with an apparent activation energy of 0.2 eV. Irradiating only through the Si/CrSi2 interface does not induce silicide growth. It is concluded that the formation of CrSi2 by ion beam mixing is an interface-limited process and that the limiting reaction occurs at the Cr/CrSi2 interface.

Chromium(VI) generation in vadose zone soils and alluvial sediments of the southwestern Sacramento Valley, California: a potential source of geogenic Cr(VI) to groundwater

USGS Publications Warehouse

Mills, Christopher T.; Morrison, Jean M.; Goldhaber, Martin B.; Ellefsen, Karl J.

2011-01-01

Concentrations of geogenic Cr(VI) in groundwater that exceed the World Health Organization’s maximum contaminant level for drinking water (50 μg L−1) occur in several locations globally. The major mechanism for mobilization of this Cr(VI) at these sites is the weathering of Cr(III) from ultramafic rocks and its subsequent oxidation on Mn oxides. This process may be occurring in the southern Sacramento Valley of California where Cr(VI) concentrations in groundwater can approach or exceed 50 μg L−1. To characterize Cr geochemistry in the area, samples from several soil auger cores (approximately 4 m deep) and drill cores (approximately 25 m deep) were analyzed for total concentrations of 44 major, minor and trace elements, Cr associated with labile Mn and Fe oxides, and Cr(VI). Total concentrations of Cr in these samples ranged from 140 to 2220 mg per kg soil. Between 9 and 70 mg per kg soil was released by selective extractions that target Fe oxides, but essentially no Cr was associated with the abundant reactive Mn oxides (up to ~1000 mg hydroxylamine-reducible Mn per kg soil was present). Both borehole magnetic susceptibility surveys performed at some of the drill core sites and relative differences between Cr released in a 4-acid digestion versus total Cr (lithium metaborate fusion digestion) suggest that the majority of total Cr in the samples is present in refractory chromite minerals transported from ultramafic exposures in the Coast Range Mountains. Chromium(VI) in the samples studied ranged from 0 to 42 μg kg−1, representing a minute fraction of total Cr. Chromium(VI) content was typically below detection in surface soils (top 10 cm) where soil organic matter was high, and increased with increasing depth in the soil auger cores as organic matter decreased. Maximum concentrations of Cr(VI) were up to 3 times greater in the deeper drill core samples than the shallow auger cores. Although Cr(VI) in these vadose zone soils and sediments was only a very small fraction of the total solid phase Cr, they are a potentially important source for Cr(VI) to groundwater. Enhanced groundwater recharge through the vadose zone due to irrigation could carry Cr(VI) from the vadose zone to the groundwater and may be the mechanism responsible for the correlation observed between elevated Cr(VI) and NO3- source concentrations in previously published data for valley groundwaters. Incubation of a valley subsoil showed a Cr(VI) production rate of 24 μg kg−1 a−1 suggesting that field Cr(VI) concentrations could be regenerated annually. Increased Cr(VI) production rates in H+-amended soil incubations indicate that soil acidification processes such as nitrification of ammonium in fertilizers could potentially increase the occurrence of geogenic Cr(VI) in groundwater. Thus, despite the natural origin of the Cr, Cr(VI) generation in the Sacramento Valley soils and sediments has the potential to be influenced by human activities.

Survey of Thermal-Fluids Evaluation and Confirmatory Experimental Validation Requirements of Accident Tolerant Cladding Concepts with Focus on Boiling Heat Transfer Characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Nicholas R.; Wysocki, Aaron J.; Terrani, Kurt A.

The U.S. Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is working closely with the nuclear industry to develop fuel and cladding candidates with potentially enhanced accident tolerance, also known as accident tolerant fuel (ATF). Thermal-fluids characteristics are a vital element of a holistic engineering evaluation of ATF concepts. One vital characteristic related to boiling heat transfer is the critical heat flux (CHF). CHF plays a vital role in determining safety margins during normal operation and also in the progression of potential transient or accident scenarios. This deliverable is a scoping survey of thermal-fluids evaluation andmore » confirmatory experimental validation requirements of accident tolerant cladding concepts with a focus on boiling heat transfer characteristics. The key takeaway messages of this report are: 1. CHF prediction accuracy is important and the correlations may have significant uncertainty. 2. Surface conditions are important factors for CHF, primarily the wettability that is characterized by contact angle. Smaller contact angle indicates greater wettability, which increases the CHF. Surface roughness also impacts wettability. Results in the literature for pool boiling experiments indicate changes in CHF by up to 60% for several ATF cladding candidates. 3. The measured wettability of FeCrAl (i.e., contact angle and roughness) indicates that CHF should be investigated further through pool boiling and flow boiling experiments. 4. Initial measurements of static advancing contact angle and surface roughness indicate that FeCrAl is expected to have a higher CHF than Zircaloy. The measured contact angle of different FeCrAl alloy samples depends on oxide layer thickness and composition. The static advancing contact angle tends to decrease as the oxide layer thickness increases.« less

Efficiency, capacity, compensation, maintenance, plasticity: emerging concepts in cognitive reserve

PubMed Central

Barulli, Daniel; Stern, Yaakov

2013-01-01

Cognitive reserve (CR) is a concept meant to account for the frequent discrepancy between an individual’s measured level of brain pathology and her expected cognitive performance. It is particularly important within the context of aging and dementia, but has wider applicability to all forms of brain damage. As such, it has intimate links to related compensatory and neuroprotective concepts, as well as to the related notion of brain reserve. In this article, we introduce the concept of cognitive reserve and explicate its potential cognitive neural implementation. We conclude that cognitive reserve is compatible and complementary with many related concepts, but that each much draw sharper conceptual boundaries in order to truly explain preserved cognitive function in the face of aging or brain damage. PMID:24018144

Risk Factors for Hepatitis C Virus Reinfection After Sustained Virologic Response in Patients Coinfected With HIV

PubMed Central

Young, Jim; Rossi, Carmine; Gill, John; Walmsley, Sharon; Cooper, Curtis; Cox, Joseph; Martel-Laferriere, Valerie; Conway, Brian; Pick, Neora; Vachon, Marie-Louise

2017-01-01

Abstract Background. Highly effective hepatitis C virus (HCV) therapies have spurred a scale-up of treatment to populations at greater risk of reinfection after sustained virologic response (SVR). Reinfection may be higher in HIV–HCV coinfection, but prior studies have considered small selected populations. We assessed risk factors for reinfection after SVR in a representative cohort of Canadian coinfected patients in clinical care. Methods. All patients achieving SVR after HCV treatment were followed with HCV RNA measurements every 6 months in a prospective cohort study. We used Bayesian Cox regression to estimate reinfection rates according to patient reported injection drug use (IDU) and sexual activity among men who have sex with men (MSM). Results. Of 497 patients treated for HCV, 257 achieved SVR and had at least 1 subsequent RNA measurement. During 589 person-years of follow-up (PYFU) after SVR, 18 (7%) became HCV RNA positive. The adjusted reinfection rate (per 1000 PYFU) in the first year after SVR was highest in those who reported high-frequency IDU (58; 95% credible interval [CrI], 18–134) followed by MSM reporting high-risk sexual activity (26; 95% CrI, 6–66) and low-frequency IDU (22; 95% CrI, 4–68). The rate in low-risk MSM (16; 95% CrI, 4–38) was similar to that in reference patients (10; 95% CrI, 4–20). Reinfection rates did not diminish with time. Conclusions. HCV reinfection rates varied according to risk. Measures are needed to reduce risk behaviors and increase monitoring in high-risk IDU and MSM if HCV elimination targets are to be realized. PMID:28199495

[Efficacy of granisetron for preventing chemotherapy-induced nausea and vomiting in patients with acute myelogenous leukemia treated with a combination of anthracycline and cytarabine].

PubMed

Goto, Takashi; Tanimoto, Kazuki; Ishibashi, Makoto; Okamura, Seiichi

2012-08-01

In Japan, the combination of anthracycline and cytarabine(Ara-C)is a standard therapy for acute myelogenous leukemia(AML). Chemotherapy-induced nausea and vomiting(CINV)are frequently reported as side effects related to the administration of these regimens. In our hospital, patients received prophylactic granisetron at a dose of 3 mg daily during chemotherapy. However, granisetron is known to induce constipation as a side effect. The present study evaluated the efficacy of a single dose of granisetron administered throughout the entire period of chemotherapy in AML patients receiving anthracycline and Ara-C combination therapy, and also examined the incidence of constipation during chemotherapy. From July 2008 to December 2010, all patients with AML treated using anthracycline and Ara-C combination therapy were registered in the study. This retrospective study investigated the patients' background and the incidence of CINV and constipation from the patients' records. The efficacy of granisetron was measured on each day using the complete regression(no vomiting and no rescue medication; CR)rate. A total of 45 patients were included in the study(27 male; 18 female), and received a total 68 courses(56 of induction therapy; 12 of consolidation therapy)of the regimens. The CR rate and the incidence of constipation on the final day of chemotherapy were 61. 8% and 63. 2%, respectively. As the duration of chemotherapy increased, the CR rate tended to decrease, whereas the incidence of constipation tended to increase. The CR rate in this study was 61. 8%, thus indicating that there is still room for improvement. The combination of dexamethasone and a neurokinin-1 receptor antagonist, or the changeover from granisetron to palonosetron could therefore increase the CR rate.

Identifying critical road geometry parameters affecting crash rate and crash type.

PubMed

Othman, Sarbaz; Thomson, Robert; Lannér, Gunnar

2009-10-01

The objective of this traffic safety investigation was to find critical road parameters affecting crash rate (CR). The study was based on crash and road maintenance data from Western Sweden. More than 3000 crashes, reported from 2000 to 2005 on median-separated roads, were collected and combined with road geometric and surface data. The statistical analysis showed variations in CR when road elements changed confirming that road characteristics affect CR. The findings indicated that large radii right-turn curves were more dangerous than left curves, in particular, during lane changing manoeuvres. However sharper curves are more dangerous in both left and right curves. Moreover, motorway carriageways with no or limited shoulders have the highest CR when compared to other carriageway widths, while one lane carriageway sections on 2+1 roads were the safest. Road surface results showed that both wheel rut depth and road roughness have negative impacts on traffic safety.

Mach 1 oxidation of thoriated nickel chromium at 1204 C /2200 F/.

NASA Technical Reports Server (NTRS)

Lowell, C. E.; Sanders, W. A.

1972-01-01

Electropolished and ground samples of TD-NiCr were exposed to a 1-atm, Mach 1 gas stream at 1204 C for times up to 50 hr. The samples were subjected to both cyclic and isothermal exposure. Weight change, metal loss, X-ray diffraction, metallographic, and electron microprobe analyses were performed. Neither surface preparation nor cyclic-against-isothermal-exposure conditions had a strong effect on the oxidation behavior of the alloy. Initially, a Cr2O3 layer was formed whose volatilization resulted in a very rapid loss of metal - more than 40 microns in the first hour. At about 1 hr, the Cr2O3 layer broke down and NiO began to cover the surface. By 5 hr, the NiO had covered the surface and the rate of loss slowed. The rate-controlling step was diffusion of Cr through NiO.

Characterization of commercial off-the shelf regenerable sorbent to scrub carbon dioxide in a portable life support system

NASA Astrophysics Data System (ADS)

Arai, Tatsuya; Fricker, John

2018-06-01

A resin bead Mitsubishi DIAION™ CR20 was identified and characterized as a first commercial off-the shelf regenerable carbon dioxide (CO2) sorbent candidate for space life support system applications at room temperature. The CO2 adsorption rates and capacities of CR20 at varying CO2 partial pressures were obtained. The data were used to numerically simulate CO2 adsorption by a swingbed, a pair of two sorbent beds that alternately adsorb and desorb CO2 in a space suit portable life support system (PLSS). The result demonstrated that a reasonable volume of CR20 would be able to continuously adsorb CO2 with bed-swing interval of 4 min at 300-W metabolic rate, and that commercial off-the shelf CR20 would have similar performance of CO2 adsorption to the proprietary swingbed sorbent SA9T for PLSS applications.

Identifying Critical Road Geometry Parameters Affecting Crash Rate and Crash Type

PubMed Central

Othman, Sarbaz; Thomson, Robert; Lannér, Gunnar

2009-01-01

The objective of this traffic safety investigation was to find critical road parameters affecting crash rate (CR). The study was based on crash and road maintenance data from Western Sweden. More than 3000 crashes, reported from 2000 to 2005 on median-separated roads, were collected and combined with road geometric and surface data. The statistical analysis showed variations in CR when road elements changed confirming that road characteristics affect CR. The findings indicated that large radii right-turn curves were more dangerous than left curves, in particular, during lane changing manoeuvres. However sharper curves are more dangerous in both left and right curves. Moreover, motorway carriageways with no or limited shoulders have the highest CR when compared to other carriageway widths, while one lane carriageway sections on 2+1 roads were the safest. Road surface results showed that both wheel rut depth and road roughness have negative impacts on traffic safety. PMID:20184841

Bone marrow chimeric mice reveal a role for CX₃CR1 in maintenance of the monocyte-derived cell population in the olfactory neuroepithelium.

PubMed

Vukovic, Jana; Blomster, Linda V; Chinnery, Holly R; Weninger, Wolfgang; Jung, Steffen; McMenamin, Paul G; Ruitenberg, Marc J

2010-10-01

Macrophages in the olfactory neuroepithelium are thought to play major roles in tissue homeostasis and repair. However, little information is available at present about possible heterogeneity of these monocyte-derived cells, their turnover rates, and the role of chemokine receptors in this process. To start addressing these issues, this study used Cx₃cr1(gfp) mice, in which the gene sequence for eGFP was knocked into the CX₃CR1 gene locus in the mutant allele. Using neuroepithelial whole-mounts from Cx₃cr1(gfp/+) mice, we show that eGFP(+) cells of monocytic origin are distributed in a loose network throughout this tissue and can be subdivided further into two immunophenotypically distinct subsets based on MHC-II glycoprotein expression. BM chimeric mice were created using Cx₃cr1(gfp/+) donors to investigate turnover of macrophages (and other monocyte-derived cells) in the olfactory neuroepithelium. Our data indicate that the monocyte-derived cell population in the olfactory neuroepithelium is actively replenished by circulating monocytes and under the experimental conditions, completely turned over within 6 months. Transplantation of Cx₃cr1(gfp/gfp) (i.e., CX₃CR1-deficient) BM partially impaired the replenishment process and resulted in an overall decline of the total monocyte-derived cell number in the olfactory epithelium. Interestingly, replenishment of the CD68(low)MHC-II(+) subset appeared minimally affected by CX₃CR1 deficiency. Taken together, the established baseline data about heterogeneity of monocyte-derived cells, their replenishment rates, and the role of CX₃CR1 provide a solid basis to further examine the importance of different monocyte subsets for neuroregeneration at this unique frontier with the external environment.

Vildagliptin and caloric restriction for cardioprotection in pre-diabetic rats.

PubMed

Tanajak, Pongpan; Pintana, Hiranya; Siri-Angkul, Natthaphat; Khamseekaew, Juthamas; Apaijai, Nattayaporn; Chattipakorn, Siriporn C; Chattipakorn, Nipon

2017-02-01

Long-term high-fat diet (HFD) consumption causes cardiac dysfunction. Although calorie restriction (CR) has been shown to be useful in obesity, we hypothesized that combined CR with dipeptidyl peptidase-4 (DPP-4) inhibitor provides greater efficacy than monotherapy in attenuating cardiac dysfunction and metabolic impairment in HFD-induced obese-insulin resistant rats. Thirty male Wistar rats were divided into 2 groups to be fed on either a normal diet (ND, n = 6) or a HFD (n = 24) for 12 weeks. Then, HFD rats were divided into 4 subgroups (n = 6/subgroup) to receive just the vehicle, CR diet (60% of mean energy intake and changed to ND), vildagliptin (3 mg/kg/day) or combined CR and vildagliptin for 4 weeks. Metabolic parameters, heart rate variability (HRV), cardiac mitochondrial function, left ventricular (LV) and fibroblast growth factor (FGF) 21 signaling pathway were determined. Rats on a HFD developed insulin and FGF21 resistance, oxidative stress, cardiac mitochondrial dysfunction and impaired LV function. Rats on CR alone showed both decreased body weight and visceral fat accumulation, whereas vildagliptin did not alter these parameters. Rats in CR, vildagliptin and CR plus vildagliptin subgroups had improved insulin sensitivity and oxidative stress. However, vildagliptin improved heart rate variability (HRV), cardiac mitochondrial function and LV function better than the CR. Chronic HFD consumption leads to obese-insulin resistance and FGF21 resistance. Although CR is effective in improving metabolic regulation, vildagliptin provides greater efficacy in preventing cardiac dysfunction by improving anti-apoptosis and FGF21 signaling pathways and attenuating cardiac mitochondrial dysfunction in obese-insulin-resistant rats. © 2017 Society for Endocrinology.

Heavy Metal Resistances and Chromium Removal of a Novel Cr(VI)-Reducing Pseudomonad Strain Isolated from Circulating Cooling Water of Iron and Steel Plant.

PubMed

Zhang, Jian-Kun; Wang, Zhen-Hua; Ye, Yun

2016-12-01

Three bacterial isolates, GT2, GT3, and GT7, were isolated from the sludge and water of a circulating cooling system of iron and steel plant by screening on Cr(VI)-containing plates. Three isolates were characterized as the members of the genus Pseudomonas on the basis of phenotypic characteristics and 16S rRNA sequence analysis. All isolates were capable of resisting multiple antibiotics and heavy metals. GT7 was most resistant to Cr(VI), with a minimum inhibitory concentration (MIC) of 6.5 mmol L -1 . GT7 displayed varied rates of Cr(VI) reduction in M2 broth, which was dependent on pH, initial Cr(VI) concentration, and inoculating dose. Total chromium analysis revealed that GT7 could remove a part of chromium from the media, and the maximum rate of chromium removal was up to 40.8 %. The Cr(VI) reductase activity of GT7 was mainly associated with the soluble fraction of cell-free extracts and reached optimum at pH 6.0∼8.0. The reductase activity was apparently enhanced by external electron donors and Cu(II), whereas it was seriously inhibited by Hg(II), Cd(II), and Zn(II). The reductase showed a K m of 74 μmol L -1 of Cr(VI) and a V max of 0.86 μmol of Cr(VI) min -1  mg -1 of protein. The results suggested that GT7 could be a promising candidate for in situ bioremediation of Cr(VI).

New Recording Layer of Recordable Digital Versatile Disc with CrOx Film Using Red Laser

NASA Astrophysics Data System (ADS)

Liu, Chung Ping; Hung, Yao Ti

2006-03-01

In this study, CrOx film deposited by rf magnetron reactive sputtering was used as a new recording layer for a recordable digital versatile disc (DVD-R) with a red laser. X-ray photoelectron spectroscopy (XPS) indicated the films have three major components: CrO2, CrO3, and Cr2O3. From disc dynamic tests and atomic force microscope (AFM) images of a polycarbonate (PC) substrate, a DVD-R structure of PC/ZnS-SiO2 (30 nm)/CrOx (120 nm)/ZnS-SiO2 (40 nm)/Ag (50 nm), deposited by sputtering at an O2/Ar flow rate ratio of 0.4, had an improved carrier-to-noise ratio (CNR). The principle of recording depends primarily on the explosive pressure of the O2 released due to laser heating of the annealed CrOx film.

On the positronium spin conversion reactions caused by some macrocyclic Co II complexes

NASA Astrophysics Data System (ADS)

Fantola-Lazzarini, Anna L.; Lazzarini, Ennio

2002-08-01

The rate constants, kCR, of ortho- into para-positronium ( o-Ps→ p-Ps) spin conversion reactions, CR, caused by the high-spin [Co IIsep] 2+, [Co IIdinosar] 2+ and [Co IIdiamsar] 2+ macrocyclic complexes and also by high-spin [Co II sen] 2+ tripod complex were measured at several temperatures. The delocalizations, β, of Co II unpaired electrons, promoted by the mentioned ligands, were determined by using the previously established correlations between kCR and the electron delocalization β of unpaired metal electrons. β is given by the ratio between the Racah inter-electronic repulsion parameters of complexes, B, and that of the free ions, B0. The β values are compared with those of the Co II complexes with en (1,2-ethanediamine), pn (1,2 propanediamine) and dien (2,2' diamino diethylamine) ligands. The kCR rate constants are also compared with those of the Ps oxidation reactions, OR, promoted by the corresponding Co III complexes. It is concluded that, unlike OR's, the CR's do not occur by formation of hepta-coordinate adducts with Ps atoms.

Influence of substrate bias voltage on structure and properties of the CrAlN films deposited by unbalanced magnetron sputtering

NASA Astrophysics Data System (ADS)

Lv, Yanhong; Ji, Li; Liu, Xiaohong; Li, Hongxuan; Zhou, Huidi; Chen, Jianmin

2012-02-01

The CrAlN films were deposited on silicon and stainless steel substrates by unbalanced magnetron sputtering system. The influence of substrate bias on deposition rate, composition, structure, morphology and properties of the CrAlN films was investigated. The results showed that, with the increase of the substrate bias voltage, the deposition rate decreased accompanied by a change of the preferred orientation of the CrAlN film from (2 2 0) to (2 0 0). The grain size and the average surface roughness of the CrAlN films declined as the bias voltage increases above -100 V. The morphology of the films changed from obviously columnar to dense glass-like structure with the increase of the bias voltage from -50 to -250 V. Meanwhile, the films deposited at moderate bias voltage had better mechanical and tribological properties, while the films deposited at higher bias voltage showed better corrosion resistance. It was found that the corrosion resistance improvement was not only attributed to the low pinhole density of the film, but also to chemical composition of films.

Neoadjuvant paclitaxel poliglumex, cisplatin, and radiation for esophageal cancer: a phase 2 trial.

PubMed

Dipetrillo, Thomas; Suntharalingam, Mohan; Ng, Thomas; Fontaine, Jacques; Horiba, Naomi; Oldenburg, Nicklas; Perez, Kimberly; Birnbaum, Ari; Battafarano, Richard; Burrows, Whitney; Safran, Howard

2012-02-01

To evaluate the pathologic complete response (CR) rate and safety of paclitaxel poliglumex (PPX), cisplatin, and concurrent radiation for patients with esophageal cancer. Patients with adenocarcinoma or squamous cell carcinoma of the esophagus or gastroesophageal junction with no evidence of distant metastasis received PPX (50 mg/m(2)/wk) and cisplatin (25 mg/m(2)/wk) for 6 weeks with 50.4 Gy concurrent radiation. Six to eight weeks after completion of chemoradiotherapy, patients underwent surgical resection. Forty patients were enrolled, 37 patients with adenocarcinoma and 3 patients with squamous cell cancer. The treatment-related grade 3 nonhematologic toxicities included esophagitis (7%), nausea (7%), and fatigue (5%). Three patients with clinical endoscopic CR (2 with squamous cell cancer) refused surgery. Twelve of the remaining 37 patients (32%) had a pathologic CR. The 12 patients with pathologic CR all had adenocarcinoma. PPX, cisplatin, and concurrent radiation are well tolerated, easily administered regimen for esophageal cancer with a low incidence of significant esophagitis and a high pathologic CR rate consistent with the preclinical data of PPX and radiation.

The efficacy and safety of palonosetron compared with granisetron in preventing highly emetogenic chemotherapy-induced vomiting in the Chinese cancer patients: a phase II, multicenter, randomized, double-blind, parallel, comparative clinical trial.

PubMed

Yu, Zhaocai; Liu, Wenchao; Wang, Ling; Liang, Houjie; Huang, Ying; Si, Xiaoming; Zhang, Helong; Liu, Duhu; Zhang, Hongmei

2009-01-01

This clinical trial was conducted to evaluate the efficacy and safety of Palonosetron in preventing chemotherapy-induced vomiting (CIV) among the Chinese cancer patients. Two hundred and forty patients were scheduled to be enrolled and randomized to receive a single intravenous dose of palonosetron 0.25 mg, or granisetron 3 mg, 30 min before receiving highly emetogenic chemotherapy. The primary efficacy endpoint was the complete response (CR) rate for acute CIV (during the 0-24-h interval after chemotherapy). Secondary endpoints included the CR rates for delayed CIV (more than 24 h after chemotherapy). Two hundred and eight patients were accrued and received study medication. CR rates for acute CIV were 82.69% for palonosetron and 72.12% for granisetron, which demonstrated that palonosetron was not inferior to granisetron in preventing acute CIV. Comparisons of CR rates for delayed CIV yielded no statistical difference between palonosetron and granisetron groups and did not reveal non-inferiority of palonosetron to granisetron. Adverse events were mostly mild to moderate, with quite low rates among the two groups. A single dose (0.25 mg) of palonosetron is not inferior to a single dose (3 mg) of granisetron in preventing CIV and possesses an acceptable safety profile in the Chinese population.

Accumulation rates of airborne heavy metals in wetlands

USGS Publications Warehouse

Souch, C.J.; Filippelli, G.M.; Dollar, N.; Perkins, S.; Mastalerz, Maria

2002-01-01

Accumulation rates of heavy metals (Cd, Cr, Cu, Mn, Pb, and Zn) retained in wetland sediments in northwest Indiana-downwind of the Chicago-Gary-Hammond industrial area-are quantified to assess anthropogenic influences on atmospheric fluxes. Metal concentrations for 22 sediment cores are determined by ICP-AES after ashing and strong acid extraction. Relations between organic content and metal concentrations at depth are used to separate natural and anthropogenic sources. Accumulation rates over the lifetime of the wetlands (???4500 years) have averaged 0.2 (Cd), 1.4 (Cu), 1.7 (Cr), 13.4 (Mn), 4.8 (Pb), and 18.7 (Zn) mg m-2 y-1. Rates for the last 100 years have increased on average by factors of 6 (Cd), 8 (Cu), 10 (Mn), 15 (Pb), and 30 (Zn), remaining effectively constant for Cr. Where the wetlands have been drained, metals have been lost from the sediments, owing to changes in organic content and local hydrochemistry (exposure to acidic rainfall). Sediment-based accumulation rates at the undrained sites are higher, though generally consistent, with measured and modeled atmospheric fluxes documented by short-term studies conducted over the last three decades. The fraction of the total metals in the wetlands estimated to be of anthropogenic origin ranges from approximately 3% for Cr, up to approximately 35% for Pb, and 70% for Zn. This historic legacy of contamination must be considered in land management decisions, particularly when wetlands are drained.

Electrochemical corrosion behaviour of dental/implant alloys in saline medium.

PubMed

Sharma, Mohit; Kumar, A V Ramesh; Singh, Nirbhay

2008-07-01

Dental alloys implanted in mouth are exposed to various aggressive conditions. Keeping this in view, corrosion behaviour of various dental alloys viz. Ni-Cr, Co-Cr, Cu-Ni-Al and commercially pure Ti (c.p. Ti) were studied in 3% NaCl medium by using Tafel polarization, cyclic polarization and electrochemical impedance spectroscopy techniques. EIS studies were carried out for different duration viz. 1 h, 1 day and 7 days to evaluate the stability of passive film and change in corrosion characteristics with time. It has been found that for Ni-Cr, Co-Cr (DRDO developed) and c.p. Ti the passive film characteristic changed with time whereas for Co-Cr (commercial) and Cu-Ni-Al alloys, the passive film characteristics remained same. From DC electrochemical studies various parameters viz. i(corr), E(corr), i(pass), E(pass) were evaluated. The corrosion rates were observed to be in the order Cu-Ni-Al > Co-Cr (commercial) > Ni-Cr > c.p. Ti > Co-Cr (DRDO).

Effect of Organic Substrates on the Photocatalytic Reduction of Cr(VI) by Porous Hollow Ga2O3 Nanoparticles

PubMed Central

Liu, Jin; Gan, Huihui; Wu, Hongzhang; Zhang, Xinlei; Zhang, Jun; Li, Lili; Wang, Zhenling

2018-01-01

Porous hollow Ga2O3 nanoparticles were successfully synthesized by a hydrolysis method followed by calcination. The prepared samples were characterized by field emission scanning electron microscope, transmission electron microscope, thermogravimetry and differential scanning calorimetry, UV-vis diffuse reflectance spectra and Raman spectrum. The porous structure of Ga2O3 nanoparticles can enhance the light harvesting efficiency, and provide lots of channels for the diffusion of Cr(VI) and Cr(III). Photocatalytic reduction of Cr(VI), with different initial pH and degradation of several organic substrates by porous hollow Ga2O3 nanoparticles in single system and binary system, were investigated in detail. The reduction rate of Cr(VI) in the binary pollutant system is markedly faster than that in the single Cr(VI) system, because Cr(VI) mainly acts as photogenerated electron acceptor. In addition, the type and concentration of organic substrates have an important role in the photocatalytic reduction of Cr(VI). PMID:29690548

Irradiation of Wrought FeCrAl Tubes in the High Flux Isotope Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linton, Kory D.; Field, Kevin G.; Petrie, Christian M.

The Advanced Fuels Campaign within the Nuclear Technology Research and Development program of the Department of Energy Office of Nuclear Energy is seeking to improve the accident tolerance of light water reactors. Alumina-forming ferritic alloys (e.g., FeCrAl) are one of the leading candidate materials for fuel cladding to replace traditional zirconium alloys because of the superior oxidation resistance of FeCrAl. However, there are still some unresolved questions regarding irradiation effects on the microstructure and mechanical properties of FeCrAl at end-of-life dose levels. In particular, there are concerns related to irradiation-induced embrittlement of FeCrAl alloys due to secondary phase formation. Tomore » address this issue, Oak Ridge National Laboratory has developed a new experimental design to irradiate shortened cladding tube specimens with representative 17×17 array pressurized water reactor diameter and thickness in the High Flux Isotope Reactor (HFIR) under relevant temperatures (300–350°C). Post-irradiation examination will include studies of dimensional change, microstructural changes, and mechanical performance. This report briefly summarizes the capsule design concept and the irradiation test matrix for six rabbit capsules. Each rabbit contains two FeCrAl alloy tube specimens. The specimens include Generation I and Generation II FeCrAl alloys with varying processing conditions, Cr concentrations, and minor alloying elements. The rabbits were successfully assembled, welded, evaluated, and delivered to the HFIR along with a complete quality assurance fabrication package. Pictures of the rabbit assembly process and detailed dimensional inspection of select specimens are included in this report. The rabbits were inserted into HFIR starting in cycle 472 (May 2017).« less

Translation, Cross-cultural Adaptation and Psychometric Validation of the Korean-Language Cardiac Rehabilitation Barriers Scale (CRBS-K).

PubMed

Baek, Sora; Park, Hee-Won; Lee, Yookyung; Grace, Sherry L; Kim, Won-Seok

2017-10-01

To perform a translation and cross-cultural adaptation of the Cardiac Rehabilitation Barriers Scale (CRBS) for use in Korea, followed by psychometric validation. The CRBS was developed to assess patients' perception of the degree to which patient, provider and health system-level barriers affect their cardiac rehabilitation (CR) participation. The CRBS consists of 21 items (barriers to adherence) rated on a 5-point Likert scale. The first phase was to translate and cross-culturally adapt the CRBS to the Korean language. After back-translation, both versions were reviewed by a committee. The face validity was assessed in a sample of Korean patients (n=53) with history of acute myocardial infarction that did not participate in CR through semi-structured interviews. The second phase was to assess the construct and criterion validity of the Korean translation as well as internal reliability, through administration of the translated version in 104 patients, principle component analysis with varimax rotation and cross-referencing against CR use, respectively. The length, readability, and clarity of the questionnaire were rated well, demonstrating face validity. Analysis revealed a six-factor solution, demonstrating construct validity. Cronbach's alpha was greater than 0.65. Barriers rated highest included not knowing about CR and not being contacted by a program. The mean CRBS score was significantly higher among non-attendees (2.71±0.26) than CR attendees (2.51±0.18) (p<0.01). The Korean version of CRBS has demonstrated face, content and criterion validity, suggesting it may be useful for assessing barriers to CR utilization in Korea.

Development of Measures of Effectiveness and Performance from Cognitive Work Analysis Products

DTIC Science & Technology

2012-02-01

la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2012 DRDC Atlantic CR 2011...le nouveau concept du système. Ce rapport vise à déterminer si les résultats du travail de conception peuvent aider à élaborer des mesures de ...l’information (IIDS). Le contrat actuel comportait deux objectifs : élaborer des mesures de l’efficacité (MOE) et du rendement (MOP) pour

Calorie Restriction and Aging in Nonhuman Primates

PubMed Central

Kemnitz, Joseph W.

2012-01-01

In the 75 years since the seminal observation of Clive McCay that restriction of calorie intake extends the lifespan of rats, a great deal has been learned about the effects of calorie restriction (CR; reduced intake of a nutritious diet) on aging in various short-lived animal models. Studies have demonstrated many beneficial effects of CR on health, the rate of aging, and longevity. Two prospective investigations of the effects of CR on long-lived nonhuman primate (NHP) species began nearly 25 years ago and are still under way. This review presents the design, methods, and main findings of these and other important contributing studies, which have generally revealed beneficial effects of CR on physiological function and the retardation of disease consistent with studies in other species. Specifically, prolonged CR appears to extend the lifespan of rhesus monkeys, which exhibited lower body fat; slower rate of muscle loss with age; lower incidence of neoplasia, cardiovascular disease, type 2 diabetes mellitus, and endometriosis; improved insulin sensitivity and glucose tolerance; and no apparent adverse effect on bone health, as well as a reduction in total energy expenditure. In addition, there are no reports of deleterious effects of CR on reproductive endpoints, and brain morphology is preserved by CR. Adrenal and thyroid hormone profiles are inconsistently affected. More research is needed to delineate the mechanisms of the desirable outcomes of CR and to develop interventions that can produce similar beneficial outcomes for humans. This research offers tremendous potential for producing novel insights into aging and risk of disease. PMID:21411859

Coadsorption and subsequent redox conversion behaviors of As(III) and Cr(VI) on Al-containing ferrihydrite.

PubMed

Ding, Zecong; Fu, Fenglian; Dionysiou, Dionysios D; Tang, Bing

2018-04-01

Naturally occurring ferrihydrite often contains various impurities, and Al is one of the most prominent impurities. However, little is known about how these impurities impact the physical and chemical properties of ferrihydrite with respect to metal(loid) adsorption. In this study, a series of Al-containing ferrihydrites were synthesized and exposed to a mixed solution containing As(III) and Cr(VI). The results showed that the two contaminants can be quickly adsorbed onto the surface of Al-containing ferrihydrite under acidic and neutral conditions. With the increase of Al molar percentage in ferrihydrites from 0 to 30, the adsorption capacity of As(III) decreased, whereas it increased for Cr(VI). On the other hand, with the increase of pH value from 3.0 to 11.0, the decreasing rate of As(III) was accelerated first, then slowed down, whereas the Cr(VI) decreasing rate slowed down dramatically. X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis method, transmission electron microscopy (TEM) analysis, energy dispersive spectroscopy (EDS) mapping, Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS) were employed to characterize Al-containing ferrihydrite. Interestingly, it was found that the redox transformation occurred between As(III) and Cr(VI) after the two contaminants were coadsorbed onto the surface of Al-containing ferrihydrite. The oxidation of As(III) to As(V) and reduction of Cr(VI) to Cr(III) would greatly lower the environmental hazard of the As(III) and Cr(VI). Copyright © 2018 Elsevier Ltd. All rights reserved.

Two combined mechanisms responsible to hexavalent chromium removal on active anaerobic granular consortium.

PubMed

Durán, U; Coronado-Apodaca, K G; Meza-Escalante, E R; Ulloa-Mercado, G; Serrano, D

2018-05-01

Hexavalent chromium (Cr VI) from industrial wastewaters represents a highly toxic source at low concentrations. Biological treatments with anaerobic granular biomass are a promising alternative for the Cr VI bioremediation. This study evaluated the Cr VI removal in a range of 5-500 mg/L, using an active anaerobic granular consortium. Two removal mechanisms were differentiated from the assays: 1) biological reduction of 70 mg/L to Cr III at a concentration of 250 mg Cr VI/L and 2) physical bioadsorption of 297 mg of Cr VI/L or 31.39 mg of Cr VI/g biomass at concentration of 500 mg Cr VI /L. The half-maximal inhibitory concentration (IC 50 ) values for the rate and production of methane were 1.4 and 253 mg/L, respectively. In addition, Cr VI is a biostimulant that increase the methane production, in a range from 5 to 100 mg/L, of the anaerobic consortium. This work demonstrates the potential application of the anaerobic granular consortium in metal bioremediation. Copyright © 2018 Elsevier Ltd. All rights reserved.

Smoking and Cardiac Rehabilitation Participation: Associations with Referral, Attendance and Adherence

PubMed Central

Gaalema, Diann E.; Cutler, Alexander Y.; Higgins, Stephen T.; Ades, Philip A.

2015-01-01

Objective Continued smoking after a cardiac event greatly increases mortality risk. Smoking cessation and participation in cardiac rehabilitation (CR) are effective in reducing morbidity and mortality. However, these two behaviors may interact; those who smoke may be less likely to access or complete CR. This review explores the association between smoking status and CR referral, attendance, and adherence. Methods A systematic literature search was conducted examining associations between smoking status and CR referral, attendance and completion in peer-reviewed studies published through July 1st, 2014. For inclusion, studies had to report data on outpatient CR referral, attendance or completion rates and smoking status had to be considered as a variable associated with these outcomes. Results Fifty-six studies met inclusion criteria. In summary, a history of smoking was associated with an increased likelihood of referral to CR. However, smoking status also predicted not attending CR and was a strong predictor of CR dropout. Conclusion Continued smoking after a cardiac event predicts lack of attendance in, and completion of CR. The issue of smoking following a coronary event deserves renewed attention. PMID:25900804

Rapid degradation of Congo red by molecularly imprinted polypyrrole-coated magnetic TiO2 nanoparticles in dark at ambient conditions.

PubMed

Wei, Shoutai; Hu, Xiaolei; Liu, Hualong; Wang, Qiang; He, Chiyang

2015-08-30

A novel molecularly imprinted polymer (MIP)-coated magnetic TiO2 nanocomposite was prepared, using methyl orange (MO) as the dummy template and pyrrole as functional monomer, for degradation of Congo red (CR). The nanocomposite was characterized by Fourier transform infrared spectroscopy, thermo-gravimetric analysis, X-ray diffraction, transmission electron microscopy, and vibrating sample magnetometer. The imprinting efficiency of the imprinted nanoparticles was investigated by static binding test, and their degradation ability toward CR was also studied. Moreover, the effects of pH, temperature, dissolved oxygen and oscillation rate on degradation rate of CR were investigated. Results showed that the imprinted nanocomposite had higher adsorption ability for MO compared with the non-imprinted one. Moreover, it could degrade CR rapidly in dark at room temperature and atmospheric pressure and could be recycled easily by a magnet with a good reusability. A degradation mechanism was proposed according to LC-MS analysis of degradation products of CR. The new imprinted nanoparticles showed high catalytic activity at ambient conditions without light illumination and additional chemicals, and therefore, it can be potentially applied to the rapid, "green" and low-cost degradation of CR in industrial printing and dyeing wastewater. Copyright © 2015 Elsevier B.V. All rights reserved.

Biological Cr(VI) removal using bio-filters and constructed wetlands.

PubMed

Michailides, Michail K; Sultana, Mar-Yam; Tekerlekopoulou, Athanasia G; Akratos, Christos S; Vayenas, Dimitrios V

2013-01-01

The bioreduction of hexavalent chromium from aqueous solution was carried out using suspended growth and packed-bed reactors under a draw-fill operating mode, and horizontal subsurface constructed wetlands. Reactors were inoculated with industrial sludge from the Hellenic Aerospace Industry using sugar as substrate. In the suspended growth reactors, the maximum Cr(VI) reduction rate (about 2 mg/L h) was achieved for an initial concentration of 12.85 mg/L, while in the attached growth reactors, a similar reduction rate was achieved even with high initial concentrations (109 mg/L), thus confirming the advantage of these systems. Two horizontal subsurface constructed wetlands (CWs) pilot-scale units were also built and operated. The units contained fine gravel. One unit was planted with common reeds and one was kept unplanted. The mean influent concentrations of Cr(VI) were 5.61 and 5.47 mg/L for the planted and unplanted units, respectively. The performance of the planted CW units was very effective as mean Cr(VI) removal efficiency was 85% and efficiency maximum reached 100%. On the contrary, the unplanted CW achieved very low Cr(VI) removal with a mean value of 26%. Both attached growth reactors and CWs proved efficient and viable means for Cr(VI) reduction.

A virus spreading model for cognitive radio networks

NASA Astrophysics Data System (ADS)

Hou, L.; Yeung, K. H.; Wong, K. Y.

2012-12-01

Since cognitive radio (CR) networks could solve the spectrum scarcity problem, they have drawn much research in recent years. Artificial intelligence(AI) is introduced into CRs to learn from and adapt to their environment. Nonetheless, AI brings in a new kind of attacks specific to CR networks. The most powerful one is a self-propagating AI virus. And no spreading properties specific to this virus have been reported in the literature. To fill this research gap, we propose a virus spreading model of an AI virus by considering the characteristics of CR networks and the behavior of CR users. Several important observations are made from the simulation results based on the model. Firstly, the time taken to infect the whole network increases exponentially with the network size. Based on this result, CR network designers could calculate the optimal network size to slow down AI virus propagation rate. Secondly, the anti-virus performance of static networks to an AI virus is better than dynamic networks. Thirdly, if the CR devices with the highest degree are initially infected, the AI virus propagation rate will be increased substantially. Finally, it is also found that in the area with abundant spectrum resource, the AI virus propagation speed increases notably but the variability of the spectrum does not affect the propagation speed much.

Blinatumomab vs historical standard therapy of adult relapsed/refractory acute lymphoblastic leukemia.

PubMed

Gökbuget, N; Kelsh, M; Chia, V; Advani, A; Bassan, R; Dombret, H; Doubek, M; Fielding, A K; Giebel, S; Haddad, V; Hoelzer, D; Holland, C; Ifrah, N; Katz, A; Maniar, T; Martinelli, G; Morgades, M; O'Brien, S; Ribera, J-M; Rowe, J M; Stein, A; Topp, M; Wadleigh, M; Kantarjian, H

2016-09-23

We compared outcomes from a single-arm study of blinatumomab in adult patients with B-precursor Ph-negative relapsed/refractory acute lymphoblastic leukemia (R/R ALL) with a historical data set from Europe and the United States. Estimates of complete remission (CR) and overall survival (OS) were weighted by the frequency distribution of prognostic factors in the blinatumomab trial. Outcomes were also compared between the trial and historical data using propensity score methods. The historical cohort included 694 patients with CR data and 1112 patients with OS data compared with 189 patients with CR and survival data in the blinatumomab trial. The weighted analysis revealed a CR rate of 24% (95% CI: 20-27%) and a median OS of 3.3 months (95% CI: 2.8-3.6) in the historical cohort compared with a CR/CRh rate of 43% (95% CI: 36-50%) and a median OS of 6.1 months (95% CI: 4.2-7.5) in the blinatumomab trial. Propensity score analysis estimated increased odds of CR/CRh (OR=2.68, 95% CI: 1.67-4.31) and improved OS (HR=0.536, 95% CI: 0.394-0.730) with blinatumomab. The analysis demonstrates the application of different study designs and statistical methods to compare novel therapies for R/R ALL with historical data.

Hydrogen consentration meter utilizing a diffusion tube composed of 2 1/4 C r

DOEpatents

Roy, Prodyot; Sandusky, David W.; Hartle, Robert T.

1979-01-01

A diffusion tube hydrogen meter for improving the sensitivity and response time for the measurement of hydrogen in liquid sodium. The improved hydrogen meter has a composite membrane composed of pure nickel sleeve fitted, for example, over a 2 1/4 Cr-1 Mo steel or niobium diffusion tube. Since the hydrogen permeation rate through 2 1/4 Cr-1 Mo steels is a factor of four higher than pure nickel, and the permeation rate of hydrogen through niobium is two orders of magnitude greater than the 2 1/4 Cr-1 Mo steel, this results in a decrease in response time and an increase in the sensitivity.

Assessment of Subjective Perceived Exertion at the Anaerobic Threshold with the Borg CR-10 Scale.

PubMed

Zamunér, Antonio R; Moreno, Marlene A; Camargo, Taís M; Graetz, Juliana P; Rebelo, Ana C S; Tamburús, Nayara Y; da Silva, Ester

2011-01-01

The purpose of this study was to evaluate the anaerobic threshold (AT) with a graphic visual method for estimating the intensity of ventilatory and metabolic exertion and to determine the ratings of perceived exertion (RPE) on the Borg CR-10 scale during a continuous ramp type exercise test (CT-R). Forty healthy, physically active and sedentary young women (age 23.1 ± 3.52 years) were divided into two groups according to their fitness level: active group (AG) and sedentary group (SG) and were submitted to a CT-R on a cycloergometer with 20 to 25 W/min increments. Shortly before the end of each one-minute period, the subjects were asked to rate dyspnea (RPE-D) and leg fatigue (RPE-L) on the Borg CR-10 scale. After the AT was determined with the graphic visual method, the score that the volunteers gave on the Borg CR10 scale was verified. Data were analyzed using the Mann-Whitney and Spearman correlation tests with the significance level set at 5%. The mean ratings of RPE-L and RPE-D at the AT level were not significantly different between groups (p > 0.05). Significant correlations were found between VO2, heart rate (HR), power output and RPE for both groups. The muscular and respiratory RPE, according to the Borg CR-10 scale, were correlated with the AT, suggesting that scores close to 5, which correspond to a "strong" perception, may be used as parameters for quantifying aerobic exercise intensity for active and sedentary individuals. The similar perception of exercise intensity, which corresponded to the AT of different individuals, makes it possible to prescribe exercise at an intensity equivalent to the AT by means of the RPE. Key pointsInterest in quantitative and systematic determination of the AT is growing, however, qualitative studies measure the AT by perceived exertion, are still unsubstantial.Borg CR-10 scale is a category scale with ratio properties consisting of numbers related to verbal expressions, which allows rate comparison between intensities as well as a determination of intensity levels.Scores close to 5 expressed on the Borg CR-10 scale, which correspond to a "strong" perception, may be used as parameters for quantifying the aerobic exercise intensity of both active and sedentary women.

Validity and reliability of the session-RPE method for quantifying training in Australian football: a comparison of the CR10 and CR100 scales.

PubMed

Scott, Tannath J; Black, Cameron R; Quinn, John; Coutts, Aaron J

2013-01-01

The purpose of this study was to examine and compare the criterion validity and test-retest reliability of the CR10 and CR100 rating of perceived exertion (RPE) scales for team sport athletes that undertake high-intensity, intermittent exercise. Twenty-one male Australian football (AF) players (age: 19.0 ± 1.8 years, body mass: 83.92 ± 7.88 kg) participated the first part (part A) of this study, which examined the construct validity of the session-RPE (sRPE) method for quantifying training load in AF. Ten male athletes (age: 16.1 ± 0.5 years) participated in the second part of the study (part B), which compared the test-retest reliability of the CR10 and CR100 RPE scales. In part A, the validity of the sRPE method was assessed by examining the relationships between sRPE, and objective measures of internal (i.e., heart rate) and external training load (i.e., distance traveled), collected from AF training sessions. Part B of the study assessed the reliability of sRPE through examining the test-retest reliability of sRPE during 3 different intensities of controlled intermittent running (10, 11.5, and 13 km·h(-1)). Results from part A demonstrated strong correlations for CR10- and CR100-derived sRPE with measures of internal training load (Banisters TRIMP and Edwards TRIMP) (CR10: r = 0.83 and 0.83, and CR100: r = 0.80 and 0.81, p < 0.05). Correlations between sRPE and external training load (distance, higher speed running and player load) for both the CR10 (r = 0.81, 0.71, and 0.83) and CR100 (r = 0.78, 0.69, and 0.80) were significant (p < 0.05). Results from part B demonstrated poor reliability for both the CR10 (31.9% CV) and CR100 (38.6% CV) RPE scales after short bouts of intermittent running. Collectively, these results suggest both CR10- and CR100-derived sRPE methods have good construct validity for assessing training load in AF. The poor levels of reliability revealed under field testing indicate that the sRPE method may not be sensible to detecting small changes in exercise intensity during brief intermittent running bouts. Despite this limitation, the sRPE remains a valid method to quantify training loads in high-intensity, intermittent team sport.

Study of variations in structural, optical parameters and bulk etch rate of CR-39 polymer due to electron irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sahoo, G. S.; Joshi, D. S.; Tripathy, S. P., E-mail: sam.tripathy@gmail.com, E-mail: tripathy@barc.gov.in

2016-07-14

In this work, electron induced modifications on the bulk etch rate, structural and optical parameters of CR-39 polymer were studied using gravimetric, FTIR (Fourier Transform Infrared) and UV–vis (Ultraviolet–Visible) techniques, respectively. CR-39 samples were irradiated with 10 MeV electron beam for different durations to have the absorbed doses of 1, 10, 550, 5500, 16 500, and 55 000 kGy. From the FTIR analysis, the peak intensities at different bands were found to be changing with electron dose. A few peaks were observed to shift at high electron doses. From the UV-vis analysis, the optical band gaps for both direct and indirect transitions weremore » found to be decreasing with the increase in electron dose whereas the opacity, number of carbon atoms in conjugation length, and the number of carbon atoms per cluster were found to be increasing. The bulk etch rate was observed to be increasing with the electron dose. The primary objective of this investigation was to study the response of CR-39 to high electron doses and to determine a suitable pre-irradiation condition. The results indicated that, the CR-39 pre-irradiated with electrons can have better sensitivity and thus can be potentially applied for neutron dosimetry.« less

Removal of Cr(VI) from groundwater by Fe(0)

NASA Astrophysics Data System (ADS)

Gao, Yanjiao; Liu, Rui

2017-11-01

This research was conducted to investigate the treatment of hexavalent chromium (Cr(VI)) by iron powder (Fe(0)) columns of simulated permeable reactive barriers with and without calcium carbonate (CaCO3). Two columns filled with Fe(0) were used as Cr(VI) removal equipment running at a flow velocity of 10 ml/min at room temperature. After 200 days running of the two columns, the results showed that Fe(0) was an effective material for Cr(VI) reduction with an average removal rate of above 84.6%. The performance of Column 2 with CaCO3 was better than Column 1 without CaCO3 in terms of average Cr(VI) removal rate. The presence of CaCO3 buffered the increasing pH caused by Fe(0) corrosion in Column 2 and enhanced the removal rate of Column 2. Scanning Electron Microscopy (SEM) images of Fe(0) in the three stages of running of the two columns illustrated that the coat layer of Column 1 was a little thicker than that of Column 2. Energy-dispersive spectrometry (EDS) results showed that the surface of Fe(0) of Column 2 contained more chromium elements. Raman spectroscopy found that all iron oxide was generated on the Fe(0) surface of Column 1 and Column 2 and chromium class objects were only detected on Fe(0) surface in Column 2.

Evaluation of tolerability and efficacy of incorporating carboplatin in neoadjuvant anthracycline and taxane based therapy in a BRCA1 enriched triple-negative breast cancer cohort.

PubMed

Sella, Tal; Gal Yam, Einav Nili; Levanon, Keren; Rotenberg, Tal Shapira; Gadot, Moran; Kuchuk, Iryna; Molho, Rinat Bernstein; Itai, Amit; Modiano, Tami Mekel; Gold, Raya; Kaufman, Bella; Shimon, Shani Paluch

2018-05-22

The addition of carboplatin (Cb) to neoadjuvant chemotherapy in triple-negative breast cancer (TNBC) has been demonstrated to improve pathologic complete response (pCR) at the expense of increased toxicity. We aimed to evaluate the effectiveness and tolerability of dose-dense anthracycline & cyclophosphamide (ddAC) followed by weekly paclitaxel (wT) in combination with weekly Cb. Retrospective data was collected on patients with clinical stage I-III TNBC treated with neoadjuvant ddAC-wTCb (four cycles of ddA 60 mg/m 2 and ddC 600 mg/m 2 every 2 weeks followed by 12 cycles of wT 80 mg/m 2 with Cb AUC 1.5). Indices of tolerability and pCR were evaluated and compared to a historical cohort (n = 76) treated with ddAC-T. A secondary objective was to evaluate the rates of pCR by BRCA status. For 43 eligible patients, mean age was 41.5 years, 51% had clinical stage II disease, 81.4% were clinically node positive and 32.6% carried a deleterious BRCA1 mutation. Only 35% completed all scheduled doses of chemotherapy. Grade 3/4 neutropenia was observed in 42.5% of patients. Overall pCR was 51.2%; 44.8% in BRCA wild-type compared to 64.3% in BRCA-associated TNBC (p = 0.232). pCR rates with ddAC-wTCb were similar to historic institutional rates with ddAC-T (51.2% vs. 51.3%, p = 0.987) and were comparable when stratified by BRCA status. In pooled multivariate analysis, only BRCA status (HR 4.00, 95%CI 1.65-9.75, p = 0.002) was significantly associated with pCR. Neoadjuvant ddAC-wTCb is less tolerable in clinical practice compared to most clinical trials, with a pCR comparable to historic rates using non-platinum regimen. The role of Cb in neoadjuvant chemotherapy for BRCA mutated TNBC remains uncertain. Copyright © 2018 Elsevier Ltd. All rights reserved.

Thermally enhanced photoluminescence for energy harvesting: from fundamentals to engineering optimization

NASA Astrophysics Data System (ADS)

Kruger, N.; Kurtulik, M.; Revivo, N.; Manor, A.; Sabapathy, T.; Rotschild, C.

2018-05-01

The radiance of thermal emission, as described by Planck’s law, depends only on the emissivity and temperature of a body, and increases monotonically with the temperature rise at any emitted wavelength. Non-thermal radiation, such as photoluminescence (PL), is a fundamental light–matter interaction that conventionally involves the absorption of an energetic photon, thermalization, and the emission of a redshifted photon. Such a quantum process is governed by rate conservation, which is contingent on the quantum efficiency. In the past, the role of rate conservation for significant thermal excitation had not been studied. Recently, we presented the theory and an experimental demonstration that showed, in contrast to thermal emission, that the PL rate is conserved when the temperature increases while each photon is blueshifted. A further rise in temperature leads to an abrupt transition to thermal emission where the photon rate increases sharply. We also demonstrated how such thermally enhanced PL (TEPL) generates orders of magnitude more energetic photons than thermal emission at similar temperatures. These findings show that TEPL is an ideal optical heat pump that can harvest thermal losses in photovoltaics with a maximal theoretical efficiency of 70%, and practical concepts potentially reaching 45% efficiency. Here we move the TEPL concept onto the engineering level and present Cr:Nd:YAG as device grade PL material, absorbing solar radiation up to 1 μm wavelength and heated by thermalization of energetic photons. Its blueshifted emission, which can match GaAs cells, is 20% of the absorbed power. Based on a detailed balance simulation, such a material coupled with proper photonic management can reach 34% power conversion efficiency. These results raise confidence in the potential of TEPL becoming a disruptive technology in photovoltaics.

The BCC/B2 morphologies in Al xNiCoFeCr high-entropy alloys

DOE PAGES

Ma, Yue; Jiang, Beibei; Li, Chunling; ...

2017-02-15

Here, the present work primarily investigates the morphological evolution of the body-centered-cubic (BCC)/B2 phases in Al xNiCoFeCr high-entropy alloys (HEAs) with increasing Al content. It is found that the BCC/B2 coherent morphology is closely related to the lattice misfit between these two phases, which is sensitive to Al. There are two types of microscopic BCC/B2 morphologies in this HEA series: one is the weave-like morphology induced by the spinodal decomposition, and the other is the microstructure of a spherical disordered BCC precipitation on the ordered B2 matrix that appears in HEAs with a much higher Al content. The mechanical properties,more » including the compressive yielding strength and microhardness of the Al xNiCoFeCr HEAs, are also discussed in light of the concept of the valence electron concentration (VEC).« less

Thermoelectric and magnetic properties of Cr-doped single crystal Bi2Se3 - Search for energy filtering

NASA Astrophysics Data System (ADS)

Cermak, P.; Ruleova, P.; Holy, V.; Prokleska, J.; Kucek, V.; Palka, K.; Benes, L.; Drasar, C.

2018-02-01

Thermoelectric effects are one of the promising ways to utilize waste heat. Novel approaches have appeared in recent decades aiming to enhance thermoelectric conversion. The theory of energy filtering of free carriers by inclusions is among the latest developed methods. Although the basic idea is clear, experimental evidence of this phenomenon is rare. Based on this concept, we searched suitable systems with stable structures showing energy filtering. Here, we report on the anomalous behavior of Cr-doped single-crystal Bi2Se3 that indicates energy filtering. The solubility of chromium in Bi2Se3 was studied, which is the key parameter in the formation process of inclusions. We present recent results on the effect of Cr-doping on the transport coefficients on a wide set of single crystalline samples. Magnetic measurements were used to corroborate the conclusions drawn from the transport and X-ray measurements.

Meta-Analysis Comparing Complete Revascularization Versus Infarct-Related Only Strategies for Patients With ST-Segment Elevation Myocardial Infarction and Multivessel Coronary Artery Disease.

PubMed

Shah, Rahman; Berzingi, Chalak; Mumtaz, Mubashir; Jasper, John B; Goswami, Rohan; Morsy, Mohamed S; Ramanathan, Kodangudi B; Rao, Sunil V

2016-11-15

Several recent randomized controlled trials (RCTs) demonstrated better outcomes with multivessel complete revascularization (CR) than with infarct-related artery-only revascularization (IRA-OR) in patients with ST-segment elevation myocardial infarction. It is unclear whether CR should be performed during the index procedure (IP) at the time of primary percutaneous coronary intervention (PCI) or as a staged procedure (SP). Therefore, we performed a pairwise meta-analysis using a random-effects model and network meta-analysis using mixed-treatment comparison models to compare the efficacies of 3 revascularization strategies (IRA-OR, CR-IP, and CR-SP). Scientific databases and websites were searched to find RCTs. Data from 9 RCTs involving 2,176 patients were included. In mixed-comparison models, CR-IP decreased the risk of major adverse cardiac events (MACEs; odds ratio [OR] 0.36, 95% CI 0.25 to 0.54), recurrent myocardial infarction (MI; OR 0.50, 95% CI 0.24 to 0.91), revascularization (OR 0.24, 95% CI 0.15 to 0.38), and cardiovascular (CV) mortality (OR 0.44, 95% CI 0.20 to 0.87). However, only the rates of MACEs, MI, and CV mortality were lower with CR-SP than with IRA-OR. Similarly, in direct-comparison meta-analysis, the risk of MI was 66% lower with CR-IP than with IRA-OR, but this advantage was not seen with CR-SP. There were no differences in all-cause mortality between the 3 revascularization strategies. In conclusion, this meta-analysis shows that in patients with ST-segment elevation myocardial infarction and multivessel coronary artery disease, CR either during primary PCI or as an SP results in lower occurrences of MACE, revascularization, and CV mortality than IRA-OR. CR performed during primary PCI also results in lower rates of recurrent MI and seems the most efficacious revascularization strategy of the 3. Published by Elsevier Inc.

Desynchronizing electrical and sensory coordinated reset neuromodulation

PubMed Central

Popovych, Oleksandr V.; Tass, Peter A.

2012-01-01

Coordinated reset (CR) stimulation is a desynchronizing stimulation technique based on timely coordinated phase resets of sub-populations of a synchronized neuronal ensemble. It has initially been computationally developed for electrical deep brain stimulation (DBS), to enable an effective desynchronization and unlearning of pathological synchrony and connectivity (anti-kindling). Here we computationally show for ensembles of spiking and bursting model neurons interacting via excitatory and inhibitory adaptive synapses that a phase reset of neuronal populations as well as a desynchronization and an anti-kindling can robustly be achieved by direct electrical stimulation or indirect (synaptically-mediated) excitatory and inhibitory stimulation. Our findings are relevant for DBS as well as for sensory stimulation in neurological disorders characterized by pathological neuronal synchrony. Based on the obtained results, we may expect that the local effects in the vicinity of a depth electrode (realized by direct stimulation of the neurons' somata or stimulation of axon terminals) and the non-local CR effects (realized by stimulation of excitatory or inhibitory efferent fibers) of deep brain CR neuromodulation may be similar or even identical. Furthermore, our results indicate that an effective desynchronization and anti-kindling can even be achieved by non-invasive, sensory CR neuromodulation. We discuss the concept of sensory CR neuromodulation in the context of neurological disorders. PMID:22454622

Desynchronizing electrical and sensory coordinated reset neuromodulation.

PubMed

Popovych, Oleksandr V; Tass, Peter A

2012-01-01

Coordinated reset (CR) stimulation is a desynchronizing stimulation technique based on timely coordinated phase resets of sub-populations of a synchronized neuronal ensemble. It has initially been computationally developed for electrical deep brain stimulation (DBS), to enable an effective desynchronization and unlearning of pathological synchrony and connectivity (anti-kindling). Here we computationally show for ensembles of spiking and bursting model neurons interacting via excitatory and inhibitory adaptive synapses that a phase reset of neuronal populations as well as a desynchronization and an anti-kindling can robustly be achieved by direct electrical stimulation or indirect (synaptically-mediated) excitatory and inhibitory stimulation. Our findings are relevant for DBS as well as for sensory stimulation in neurological disorders characterized by pathological neuronal synchrony. Based on the obtained results, we may expect that the local effects in the vicinity of a depth electrode (realized by direct stimulation of the neurons' somata or stimulation of axon terminals) and the non-local CR effects (realized by stimulation of excitatory or inhibitory efferent fibers) of deep brain CR neuromodulation may be similar or even identical. Furthermore, our results indicate that an effective desynchronization and anti-kindling can even be achieved by non-invasive, sensory CR neuromodulation. We discuss the concept of sensory CR neuromodulation in the context of neurological disorders.

The G glycoprotein of respiratory syncytial virus depresses respiratory rates through the CX3C motif and substance P.

PubMed

Tripp, Ralph A; Dakhama, Azzeddine; Jones, Les P; Barskey, Albert; Gelfand, Erwin W; Anderson, Larry J

2003-06-01

Respiratory syncytial virus (RSV) infection in the neonate can alter respiratory rates, i.e., lead to episodes of apnea. We show that RSV G glycoprotein reduces respiratory rates associated with the induction of substance P (SP) and G glycoprotein-CX3CR1 interaction, an effect that is inhibited by treatment with anti-G glycoprotein, anti-SP, or anti-CX3CR1 monoclonal antibodies. These data suggest new approaches for treating some aspects of RSV disease.

The G Glycoprotein of Respiratory Syncytial Virus Depresses Respiratory Rates through the CX3C Motif and Substance P

PubMed Central

Tripp, Ralph A.; Dakhama, Azzeddine; Jones, Les P.; Barskey, Albert; Gelfand, Erwin W.; Anderson, Larry J.

2003-01-01

Respiratory syncytial virus (RSV) infection in the neonate can alter respiratory rates, i.e., lead to episodes of apnea. We show that RSV G glycoprotein reduces respiratory rates associated with the induction of substance P (SP) and G glycoprotein-CX3CR1 interaction, an effect that is inhibited by treatment with anti-G glycoprotein, anti-SP, or anti-CX3CR1 monoclonal antibodies. These data suggest new approaches for treating some aspects of RSV disease. PMID:12743318

Using chromium stable isotope ratios to quantify Cr(VI) reduction: Lack of sorption effects

USGS Publications Warehouse

Ellis, A.S.; Johnson, T.M.; Bullen, T.D.

2004-01-01

Chromium stable isotope values can be effectively used to monitor reduction of Cr(VI) in natural waters. We investigate effects of sorption during transport of Cr(VI) which may also shift Cr isotopes values, complicating efforts to quantify reduction. This study shows that Cr stable isotope fractionation caused by sorption is negligible. Equilibrium fractionation of Cr stable isotopes between dissolved Cr-(VI) and Cr(VI) adsorbed onto ??-Al2O3 and goethite is less than 0.04???. (53Cr/52Cr) under environmentally relevant pH conditions. Batch experiments at pH 4.0 and pH 6.0 were conducted in series to sequentially magnify small isotope fractionations. A simple transport model suggests that adsorption may cause amplification of a small isotope fractionation along extreme fringes of a plume, leading to shifts in 53Cr/52Cr values. We therefore suggest that isotope values at extreme fringes of Cr plumes be critically evaluated for sorption effects. A kinetic effect was observed in experiments with goethite at pH 4 where apparently lighter isotopes diffuse into goethite clumps at a faster rate before eventually reaching equilibrium. This observed kinetic effect may be important in a natural system that has not attained equilibrium and is in need of further study. Cr isotope fractionation caused by speciation of Cr(VI) between HCrO4- and CrO42- was also examined, and we conclude that it is not measurable. In the absence of isotope fractionation caused by equilibrium speciation and sorption, most of the variation in ??53 Cr values may be attributed to reduction, and reliable estimates of Cr reduction can be made.

Reduction of hexavalent chromium with colloidal and supported palladium nanocatalysts

NASA Astrophysics Data System (ADS)

Tu, Weixia; Li, Kunjing; Shu, Xiaohui; Yu, William W.

2013-04-01

The Cr(VI) pollutants are known to cause serious harm to the environment and human health. Chemical reduction is one of the efficient methods to eliminate the Cr(VI) pollutants. We synthesized polyvinylpyrrolidone-stabilized palladium (PVP-Pd) colloidal nanoparticles to catalytically reduce Cr(VI). The PVP-Pd colloidal nanocatalysts were active on the complete reduction of Cr(VI) to Cr(III) with a rate of 22.2 molCr/(molPd min) or a turn-over frequency (TOF) of 1,329 h-1 at pH 4.0 and 45 °C. Magnetic Fe3O4 support was used for recycling the palladium nanocatalysts. The as-prepared Pd-Fe3O4 catalyst was easy to be separated from the reaction system by simply applying an external magnet and it exhibited efficient and stable reduction performance even after eight recycles.

Energy expenditure during an exercise training session for cardiac patients.

PubMed

Santa-Clara, Helena; Melo, Xavier; Willi, Romina; Pinto, Rita; Santos, Vanessa; Almeida, José P; Martins, Rodrigo; Clijsen, Ron; Mendes, Miguel; Fernhall, Bo

2018-03-01

Increasing energy expenditure (EE) in cardiac patients remains a challenge. Exercise approaches in cardiac rehabilitation/secondary prevention programs (CR/SP) have consistently resulted in minimal weight loss, due in part to the low exercise-related EE. The purpose of this study was to measure the EE among patients participating in a routine exercise session of Phase III maintenance CR/SP, where a recreational activity was introduced. Twelve overweight/obese male patients with coronary artery disease (aged 62.6 ± 8.5 years) had their total EE measured during a combined aerobic (circuit workout (ACW) and recreational activity) and resistance training (RT) session using a portable gas analyzer. Subjects were instructed to exercise at 60%-70% of heart rate reserve. Activity EE was calculated from total EE and resting EE. The duration of the session was 75.3 ± 1.5 min, of which 59.7 ± 8.8 min were above moderate intensity (3-6 METs). Activity EE was 309 ± 76 kcal, concurring to a total EE of 457 ± 80 kcal (3.9 ± 0.8 METs-h). ACW, recreational activity, and RT fulfilled 34.4% ± 6.4%, 25.0% ± 5.3%, and 14.2% ± 2.7% of the activity EE, respectively. Absolute intensities (METs) were significantly different between the RT (3.9 ± 1.0) and the ACW (6.9 ± 1.8) and recreational activity (5.9 ± 0.8). In conclusion, a combined aerobic and resistance training following standard exercise prescription practices, coupled with a recreational activity, is an effective tool to promote exercise above moderate intensity in male coronary artery disease patients. Clinicians can adopt concepts from recreational activity to develop CR/SP sessions.

Study of TLIPSS formation on different metals and alloys and their selective etching

NASA Astrophysics Data System (ADS)

Dostovalov, Alexandr V.; Korolkov, Victor P.; Terentiev, Vadim S.; Okotrub, Konstantin A.; Dultsev, Fedor N.; Nemykin, Anton; Babin, Sergey A.

2017-02-01

Experimental investigation of thermochemical laser-induced periodic surface structures (TLIPSS) formation on metal films (Ti, Cr, Ni, NiCr) at different processing conditions is presented. The hypothesis that the TLIPSS formation depends significantly on parabolic rate constant for oxide thin film growth is discussed. Evidently, low value of this parameter for Ni is the reason of TLIPSS absence on Ni and NiCr film with low Cr content. The effect of simultaneous ablative (with period ≍λ) and thermochemical (with period ≍λ) LIPSS formation was observed. The formation of structures after TLIPSS selective etching was demonstrated.

Estimation of residual glomerular filtration rate in peritoneal dialysis patients using cystatin C: comparison with 51Cr-EDTA clearance.

PubMed

Carter, Joanne L; Lane, Catherine E; Fan, Stanley L; Lamb, Edmund J

2011-11-01

Measuring glomerular filtration rate (GFR) is an important assessment in peritoneal dialysis patients. In clinical practice, it is commonly measured by calculating the mean of the urinary clearance of urea and creatinine (GFR(UrCl)) but this process is time consuming and unreliable. We wished to compare several estimates of GFR including residual GFR estimated from cystatin C (GFR(CysC)) using a published equation (Hoek), GFR(UrCl) and (51)Cr-ethylenediaminetetraacetic acid (EDTA) clearance, in peritoneal dialysis patients. GFR(CysC), GFR(UrCl) and (51)Cr-EDTA clearance were measured in 28 patients undergoing peritoneal dialysis in a single dialysis unit. GFR(CysC) was related to GFR(UrCl) (Spearman's rank correlation coefficient r(s) = 0.44; P = 0.0185) and to (51)Cr-EDTA clearance (r(s) = 0.48; P = 0.0099). GFR(CysC) values were significantly (P = 0.0077) lower than (51)Cr-EDTA clearance results (mean bias -19.7%). However, GFR(CysC) did not differ significantly (P > 0.05) from GFR(UrCl). GFR(CysC) is related to GFR(UrCl) but has a significant negative bias against (51)Cr-EDTA. Given the known limitations of (51)Cr-EDTA in estimating GFR in renal failure, this study provides additional validation suggesting that cystatin C-estimated rGFR (GFR(CysC)) gives a reasonable estimation of GFR without the clinical problems associated with 24 h urine collections.

Batch experiments characterizing the reduction of chromium(VI) using suboxic material from a mildly reducing sand and gravel aquifer

USGS Publications Warehouse

Anderson, Linda Davis; Kent, Douglas B.; Davis, James A.

1994-01-01

Batch experiments were conducted with sand collected from a shallow sand and gravel aquifer to identify the principal chemical reactions influencing the reduction of Cr(VI), so that field-observed Cr(V1) reduction could be described. The reduction appeared to be heterogeneous and occurred primarily on Fe(I1)-bearing minerals. At only 1 wt % , the fine fraction (<64 μm diameter) of the sediments dominated the amount of aqueous Cr(V1) reduction because of its greater reactivity and surface area. Although reduction of Cr(V1) increased with decreasing pH, small variations in the abundance of fine fraction among the replicate samples obscured pH trends in the batch experiments. Consistent results could only be obtained by separating the fine material from the sand and running parallel experiments on each fraction. As pH decreased (6.4 to 4.5), Cr(V1) reduction increased from 30 to 50 nmol/m2 for the sand fraction (64-1000 μm) and from 130 to 200 nmol/m2 for the fine fraction. The amount of Cr(V1) reduced in both the sand-sized and fine material increased from 35 to 80 and from 130 to 1000 nmol/m2, respectively, for a 10-fold increase in Cr(VI)initial. A consistent description of the rate data was achieved by assuming that intraparticle diffusion limited the observed rate of reduction.

Effect of CeO2 on Cyclic Hot-Corrosion Behavior of Detonation-Gun Sprayed Cr3C2-NiCr Coatings on Ni-Based Superalloy

NASA Astrophysics Data System (ADS)

Saladi, Sekar; Menghani, Jyoti; Prakash, Satya

2015-03-01

The hot-corrosion behavior of detonation-gun sprayed Cr3C2-NiCr coatings with and without 0.4 wt.% CeO2 additive on Ni-based superalloy inconel-718 is comparatively discussed in the present study. Hot-corrosion studies were carried out at 900 °C for 100 cycles in Na2SO4-60%V2O5 molten salt environment under cyclic heating and cooling conditions on bare and coated superalloys. The thermo-gravimetric technique was used to establish kinetics of hot-corrosion. XRD, FESEM/EDAX, and EDX mapping techniques were used to analyze the corrosion products of bare and coated samples. The results indicate that Cr3C2-NiCr-CeO2-coated superalloy showed better hot-corrosion resistance as compared to bare and Cr3C2-NiCr-coated superalloys. The addition of CeO2 has improved micro-hardness, porosity, and surface roughness values of Cr3C2-NiCr-CeO2 coating. The overall weight gain and parabolic rate constant of Cr3C2-NiCr-CeO2-coated superalloy were found to be lowest in the present study signifying that the addition of CeO2 in Cr3C2-NiCr powder has contributed to the development of adherent and dense oxide scale on the coating at elevated temperature.

Efficacy of Erbium, Chromium-doped:Yttrium, Scandium, Gallium, and Garnet Laser Irradiation Combined with Resin-based Tricalcium Silicate and Calcium Hydroxide on Direct Pulp Capping: A Randomized Clinical Trial.

PubMed

Cengiz, Esra; Yilmaz, Hasan Guney

2016-03-01

The purpose of this randomized clinical study was to evaluate the efficiency of erbium, chromium-doped:yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser irradiation combined with a resin-based tricalcium silicate material and calcium hydroxide in direct pulp capping for a 6-month follow-up period. A total of 60 teeth of 60 patients between the ages of 18 and 41 years were recruited for this study. Sixty permanent vital teeth without symptoms and radiographic changes were randomly assigned to the following 4 groups (n = 15): Gr CH, the exposed area was sealed with calcium hydroxide (CH) paste; Gr laser CH, the treated area was sealed with CH paste after Er,Cr:YSGG laser irradiation at an energy level of 0.5 W without water and with 45% air; Gr TheraCal, TheraCal LC (Bisco, Schaumburg, IL) was applied directly to the exposed pulp; and Gr Laser TheraCal, TheraCal LC was applied after irradiation with an Er,Cr:YSGG laser. At the 1-week and 1-, 3-, and 6-month recall examinations, the loss of vitality, spontaneous pain, reactions to thermal stimuli and percussion, and radiographic changes were considered as failure. The success rates in the CH and TheraCal groups were 73.3% and 66.6%, respectively. These rates did not reveal any significant difference. In both laser groups, success rates were 100%. The Er,Cr:YSGG laser-irradiated TheraCal and Er,Cr:YSGG laser-irradiated CH groups showed statistically higher success rates than the TheraCal and CH groups, respectively. Er,Cr:YSGG laser irradiation at 0.5 W without water combined with pulp capping agents can be recommended for direct pulp therapy. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Preoperative Chemoradiation Therapy in Combination With Panitumumab for Patients With Resectable Esophageal Cancer: The PACT Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kordes, Sil, E-mail: s.kordes@amc.uva.nl; Berge Henegouwen, Mark I. van; Hulshof, Maarten C.

Purpose: Preoperative chemoradiation therapy (CRT) has become the standard treatment strategy for patients with resectable esophageal cancer. This multicenter phase 2 study investigated the efficacy of the addition of the epidermal growth factor receptor (EGFR) inhibitor panitumumab to a preoperative CRT regimen with carboplatin, paclitaxel, and radiation therapy in patients with resectable esophageal cancer. Methods and Materials: Patients with resectable cT1N1M0 or cT2-3N0 to -2M0 tumors received preoperative CRT consisting of panitumumab (6 mg/kg) on days 1, 15, and 29, weekly administrations of carboplatin (area under the curve [AUC] = 2), and paclitaxel (50 mg/m{sup 2}) for 5 weeks and concurrent radiation therapy (41.4 Gy in 23more » fractions, 5 days per week), followed by surgery. Primary endpoint was pathologic complete response (pCR) rate. We aimed at a pCR rate of more than 40%. Furthermore, we explored the predictive value of biomarkers (EGFR, HER 2, and P53) for pCR. Results: From January 2010 until December 2011, 90 patients were enrolled. Patients were diagnosed predominantly with adenocarcinoma (AC) (80%), T3 disease (89%), and were node positive (81%). Three patients were not resected due to progressive disease. The primary aim was unmet, with a pCR rate of 22%. Patients with AC and squamous cell carcinoma reached a pCR of 14% and 47%, respectively. R0 resection was achieved in 95% of the patients. Main grade 3 toxicities were rash (12%), fatigue (11%), and nonfebrile neutropenia (11%). None of the biomarkers was predictive for response. Conclusions: The addition of panitumumab to CRT with carboplatin and paclitaxel was safe and well tolerated but could not improve pCR rate to the preset criterion of 40%.« less

Gender differences in home-based cardiac rehabilitation of post-percutaneous coronary intervention patients.

PubMed

Kim, Yong Hwan; So, Wi-Young

2018-04-20

Cardiac rehabilitation (CR) is a structured program for the prevention of secondary cardiovascular disease (CVD) and related diseases, such as hypertension, diabetes, and obesity. This study aimed to investigate whether there are gender differences after 9 months of home-based cardiac rehabilitation program in post-percutaneous coronary intervention patients. A total of 114 (58.29 ± 10.33 years) men and 30 (60.90 ± 9.32 years) women were enrolled in the CR program. The program included three visits: initial, 4th month (follow-up), and 9th month (final) visits at a CR center. The CR program included exercise and nutrition counseling. In nutrition counseling, a professional nutritionist educated the patients on how to organize the menu, incorporating an optimal caloric, low-salt, and low-cholesterol diet. Exercise was performed 30 min per session for more than 3 days per week with a target heart rate within 40-75% of the peak heart rate-resting heart rate (VO 2 reserve; VO 2 R) during intense exercise, which was based on ECG treadmill test. After 9 months, there was no significant difference in terms of dropout rate between men and women (p < 0.05). No significant changes were found in the anthropometric and lipid profiles in women, whereas the HDL-cholesterol (HDL-C) was significantly increased to 6.8% (p = 0.005) in men. The findings of our study showed that there was no difference in the CR participation rate between men and women. Moreover, there was an increase in HDL-C levels and an improvement in cardiorespiratory endurance, strength, and agility in men, whereas no significant difference in most risk factors and fitness variables was found in women. Thus, the 9-month home-based CR program was more effective for fitness in men, but only the HDL-C showed positive improvement among the cardiovascular risk factors. In women, 6-min walk and timed up and go were effective exercises.

Quadratic Frequency Modulation Signals Parameter Estimation Based on Two-Dimensional Product Modified Parameterized Chirp Rate-Quadratic Chirp Rate Distribution.

PubMed

Qu, Zhiyu; Qu, Fuxin; Hou, Changbo; Jing, Fulong

2018-05-19

In an inverse synthetic aperture radar (ISAR) imaging system for targets with complex motion, the azimuth echo signals of the target are always modeled as multicomponent quadratic frequency modulation (QFM) signals. The chirp rate (CR) and quadratic chirp rate (QCR) estimation of QFM signals is very important to solve the ISAR image defocus problem. For multicomponent QFM (multi-QFM) signals, the conventional QR and QCR estimation algorithms suffer from the cross-term and poor anti-noise ability. This paper proposes a novel estimation algorithm called a two-dimensional product modified parameterized chirp rate-quadratic chirp rate distribution (2D-PMPCRD) for QFM signals parameter estimation. The 2D-PMPCRD employs a multi-scale parametric symmetric self-correlation function and modified nonuniform fast Fourier transform-Fast Fourier transform to transform the signals into the chirp rate-quadratic chirp rate (CR-QCR) domains. It can greatly suppress the cross-terms while strengthening the auto-terms by multiplying different CR-QCR domains with different scale factors. Compared with high order ambiguity function-integrated cubic phase function and modified Lv's distribution, the simulation results verify that the 2D-PMPCRD acquires higher anti-noise performance and obtains better cross-terms suppression performance for multi-QFM signals with reasonable computation cost.

Directionally Solidified NiAl-Based Alloys Studied for Improved Elevated-Temperature Strength and Room-Temperature Fracture Toughness

NASA Technical Reports Server (NTRS)

Whittenberger, J. Daniel; Raj, Sai V.; Locci, Ivan E.; Salem, Jonathan A.

2000-01-01

Efforts are underway to replace superalloys used in the hot sections of gas turbine engines with materials possessing better mechanical and physical properties. Alloys based on the intermetallic NiAl have demonstrated potential; however, they generally suffer from low fracture resistance (toughness) at room temperature and from poor strength at elevated temperatures. Directional solidification of NiAl alloyed with both Cr and Mo has yielded materials with useful toughness and elevated-temperature strength values. The intermetallic alloy NiAl has been proposed as an advanced material to extend the maximum operational temperature of gas turbine engines by several hundred degrees centigrade. This intermetallic alloy displays a lower density (approximately 30-percent less) and a higher thermal conductivity (4 to 8 times greater) than conventional superalloys as well as good high-temperature oxidation resistance. Unfortunately, unalloyed NiAl has poor elevated temperature strength (approximately 50 MPa at 1027 C) and low room-temperature fracture toughness (about 5 MPa). Directionally solidified NiAl eutectic alloys are known to possess a combination of high elevated-temperature strength and good room-temperature fracture toughness. Research has demonstrated that a NiAl matrix containing a uniform distribution of very thin Cr plates alloyed with Mo possessed both increased fracture toughness and elevated-temperature creep strength. Although attractive properties were obtained, these alloys were formed at low growth rates (greater than 19 mm/hr), which are considered to be economically unviable. Hence, an investigation was warranted of the strength and toughness behavior of NiAl-(Cr,Mo) directionally solidified at faster growth rates. If the mechanical properties did not deteriorate with increased growth rates, directional solidification could offer an economical means to produce NiAl-based alloys commercially for gas turbine engines. An investigation at the NASA Glenn Research Center at Lewis Field was undertaken to study the effect of the directional solidification growth rate on the microstructure, room temperature fracture toughness, and strength at 1027 C of a Ni-33Al-31Cr-3Mo eutectic alloy. The directionally solidified rates varied between 7.6 and 508 millimeters per hour Essentially fault-free, alternating (Cr, Mo)/NiAl lamellar plate microstructures (left photograph) were formed during growth at and below 12.7 mm/hr, whereas cellular microstructures (right photograph) with the (Cr, Mo) phase in a radial spokelike pattern were developed at faster growth rates. The compressive strength at 1027 C continuously increased with increasing growth rate and did not indicate a maxima as was reported for directionally solidified Ni-33Al-34Cr. Surprisingly, samples with the lamellar plate microstructure (left photograph) possessed a room-temperature fracture toughness of approximately 12 MPa(sup square root of m), whereas all the alloys with a cellular microstructure had a toughness of about 17 MPa(sup square root of m). These results are significant since they clearly demonstrate that Ni-33Al-31Cr-3Mo can be directionally solidified at much faster growth rates without any observable deterioration in its mechanical properties. Thus, the potential to produce strong, tough NiAl-based eutectics at commercially acceptable growth rates exists. Additional testing and alloy optimization studies are underway.

Microstructure, mechanical and tribological characterization of CrN/DLC/Cr-DLC multilayer coating with improved adhesive wear resistance

NASA Astrophysics Data System (ADS)

Sui, Xudong; Liu, Jinyu; Zhang, Shuaituo; Yang, Jun; Hao, Junying

2018-05-01

Adhesive wear is one of the major reasons for the failure of components during various tribological application, especially for rubbing with viscous materials. This study presents CrN/DLC/Cr-DLC multilayer composite coatings prepared on a plasma enhanced chemical vapor deposition (PECVD) device with the close field unbalanced magnetron sputtering ion plating (CFUBMSIP) technique. SEM, XRD and Raman spectroscopy were used to determine the structure of multilayer coatings. It was found that the multilayer coatings are composed by the alternating CrN and DLC layers. Compared with the single CrN coatings, the friction coefficient of the CrN/DLC/Cr-DLC multilayer coating decreases about more than seven times after sliding a distance of 500 m. This helps to reduce the adhesive wear of multilayer coatings. Compared with the single CrN and DLC coating, the wear rate of the CrN/DLC/Cr-DLC multilayer coating is reduced by an order of magnitude to 7.10 × 10-17 (sliding with AISI 440C) and 2.64 × 10-17 (sliding with TC4) m3/(N m). The improved tribological performance of multilayer coatings mainly attributes to the introduction of lubricant DLC and hard support CrN layers, the enhancement of crack propagation inhibition, and the increment of elastic recovery value We (71.49%) by multilayer design method.

Examination of Cr(VI) treatment by zero-valent iron using in situ, real-time X-ray absorption spectroscopy and Cr isotope measurements

NASA Astrophysics Data System (ADS)

Jamieson-Hanes, Julia H.; Lentz, Adam M.; Amos, Richard T.; Ptacek, Carol J.; Blowes, David W.

2014-10-01

A series of replicate flow-through cell experiments was conducted to characterize Cr isotope fractionation during Cr(VI) treatment by granular zero-valent iron (ZVI). Synthetic groundwater containing 50 mg L-1 Cr(VI) was pumped upward through a custom-made cell packed with ZVI under anaerobic conditions. The geochemical evolution of the system was monitored using pH and redox measurements, while aqueous effluent samples were retained for analysis of cations and Cr isotopes. Real-time, in situ X-ray absorption near edge structure (XANES) spectroscopy collected via a Kapton® window in the cell provided additional information on the speciation of the reaction products. Increases in δ53Cr values corresponding to decreases in Cr(VI) concentration suggested the occurrence of redox processes. Spectroscopic results correlated well with the isotope data, indicating reduction of Cr(VI) to Cr(III). The isotope data did not appear to follow a single trend. A two-stage system was proposed to explain the complex isotope trend, where the rapid Cr removal was associated with very little fractionation (ε = -0.2‰), whereas slower removal was associated with a greater degree of fractionation (ε = -1.2‰ to -1.5‰). Reactive transport modeling was used to quantify distinct isotope fractionation values (ε), differentiated by a significant change in the Cr removal rate.

Chemical mechanisms and reaction rates for the initiation of hot corrosion of IN-738

NASA Technical Reports Server (NTRS)

Fryburg, G. C.; Kohl, F. J.; Stearns, C. A.

1984-01-01

Sodium-sulfate-induced hot corrosion of preoxidized IN-738 was studied at 975 C with special emphasis placed on the processes occurring during the long induction period. Thermogravimetric tests were run for predetermined periods of time, and then one set of specimens was washed with water. Chemical analysis of the wash solutions yielded information about water soluble metal salts and residual sulfate. A second set of samples was cross sectioned dry and polished in a nonaqueous medium. Element distributions within the oxide scale were obtained from electron microprobe X-ray micrographs. Evolution of SO was monitored throughout the thermogravimetric tests. Kinetic rate studies were performed for several pertinent processes; appropriate rate constants were obtained from the following chemical reactions: Cr2O3 + 2 Na2SO4(1) + 3/2 O2 yields 2 Na2CrO4(1) + 2 SO3(g)n TiO2 + Na2SO4(1) yields Na2O(TiO2)n + SO3(g)n TiO2 + Na2CrO4(1) yields Na2O(TiO2)n + CrO3(g).

Evaluating an alternative method for rapid urinary creatinine determination

EPA Science Inventory

Creatinine (CR) is an endogenously-produced chemical routinely assayed in urine specimens to assess kidney function, sample dilution. The industry-standard method for CR determination, known as the kinetic Jaffe (KJ) method, relies on an exponential rate of a colorimetric change,...

Research of influence of the underlayer material on the growth rate of carbon nanotube arrays for manufacturing non-volatile memory elements with high speed

NASA Astrophysics Data System (ADS)

Klimin, V. S.; Il'ina, M. V.; Il'in, O. I.; Rudyk, N. N.; Ageev, O. A.

2017-11-01

This experimental work is devoted to the regimes of obtaining arrays of carbon nanotubes. Arrays of perpendicular nanotubes perpendicular to the surface were obtained by the method of Plasma-enhanced chemical vapor deposition. In this paper, geometric and electronic parameters of carbon nanotubes were investigated depending on the material of the sublayer. The rates of growth of carbon nanotubes on various structures were also determined. In the experiments for growth, structures such as Ni-Al-Si, Ni-V-Si, Ni-Ti-Si, Ni-Cr-Si were used. The growth rates for the intensive section were for the Ni-Cr-Si structure, the growth rate is about 1 μm / min, for the Ni-V-Si structure it is 0.55 μm / min. The growth rates for the saturation region for the Ni-Cr-Si structure, the growth rate is about 0.2 μm / min, for the Ni-V-Si structure 0.16 μm / min. The results obtained in this paper can be used to optimize the growth regimes perpendicularly oriented to the substrate carbon nanotubes, which are used as various elements in modern nanoelectronics.

Pigtail catheters used for percutaneous fluid drainage: comparison of performance characteristics.

PubMed

Macha, Douglas B; Thomas, John; Nelson, Rendon C

2006-03-01

To compare the performance characteristics of various single-lumen all-purpose pigtail drainage catheters. The following parameters were compared: flow rates between catheters of the same size, whether changing the fluid viscosity has any effect on catheter comparisons, the effect on flow of leaving an open three-way stopcock in the drainage pathway, the tendency of the catheters to kink, and catheter patency after kinking, as measured according to flow. All-purpose 8.0-, 8.3-, and 8.5-F (collectively referred to as 8-F); 10.0-, 10.2-, and 10.3-F (collectively referred to as 10-F); and 12.0-F pigtail drainage catheters from three manufacturers were evaluated. Data were compared by using two-tailed t tests after normal distributions were confirmed. P < .05 was considered to represent a significant difference. At comparison of the 8-F catheters, the C.R. Bard catheters demonstrated better flow rates than the Cook and Boston Scientific devices. Among the 10-F catheters, there were no significant differences in the flow rates of fluid with viscosity equivalent to that of water between the C.R. Bard and Boston Scientific catheters; however, both these catheter types demonstrated significantly (P < .05) better flow rates than the Cook devices. Among the 12-F catheters, the C.R. Bard catheters demonstrated significantly (P < .05) better flow rates than the other two catheter types. Changing the fluid viscosity caused no changes in comparison results. In all catheter groups, the presence of a stopcock significantly (P < .05) impaired flow. None of the evaluated catheters demonstrated a clear advantage in terms of patency or susceptibility to kinking. At comparison of the in vitro performances of catheters from different manufacturers, the C.R. Bard 8.0-F and Cook 10.2-F catheters had comparable flow rates, and flow rates through the C.R. Bard and Boston Scientific 10.0-F catheters were comparable to flow rates through the Cook and Boston Scientific 12.0-F catheters. Varying viscosity had no effect on comparisons of catheter flow rates; however, a stopcock between the vacuum source and the catheter was noted to impair flow rates in all brands and sizes of evaluated catheters. Copyright RSNA, 2006.

Comparison of bisoprolol to a metoprolol CR/ZOK tablet for control of heart rate and blood pressure in mild-to-moderate hypertensive patients: the CREATIVE study.

PubMed

Yang, Tianlun; Jiang, Yinong; Hao, Yuming; Zhou, Shuxian; Xu, Xinjuan; Qu, Baiming; Lin, Xue; Ma, Tianrong

2017-01-01

This open-label study investigated the long action of bisoprolol compared with metoprolol CR/ZOK for controlling the mean dynamic heart rate (HR) and blood pressure (BP) in patients with mild-to-moderate primary hypertension. Patients from seven centers in China were treated with either bisoprolol 5 mg or metoprolol CR/ZOK 47.5 mg once daily for 12 weeks. The primary end points were the mean dynamic HR reduction and the mean dynamic diastolic BP (DBP) control in the last 4 h of the treatment period. Secondary end points included ambulatory monitoring of the BP and HR, safety and compliance. A total of 186 patients, with 93 patients in each group, were enrolled and analyzed. In the last 4 h of the treatment period, patients receiving bisoprolol demonstrated a significantly greater reduction in the mean dynamic HR compared with patients receiving metoprolol CR/ZOK (least squares means (LSmeans) of difference: -3.79 b.p.m.; 97.5% confidence interval (CI): -7.45, -0.14; P=0.0202). Furthermore, in the last 4 h of the treatment period, bisoprolol demonstrated non-inferiority vs. metoprolol CR/ZOK in lowering the mean dynamic DBP (LSmeans of difference: -1.00; 97.5% CI: -4.79, 2.78; P=0.5495). Bisoprolol further significantly lowered the 24-h mean ambulatory, mean daytime and mean nighttime HR. The overall adverse event rate was similar between the two groups. Noncompliance was reported in 3 (3.53%) and 6 (7.32%) patients in the bisoprolol and metoprolol CR/ZOK groups, respectively. In conclusion, bisoprolol provided superior dynamic HR reduction and non-inferior dynamic BP reduction vs. metoprolol CR/ZOK in patients with mild-to-moderate hypertension. No new safety concerns were found.

Mind the gap! The mitochondrial control region and its power as a phylogenetic marker in echinoids.

PubMed

Bronstein, Omri; Kroh, Andreas; Haring, Elisabeth

2018-05-30

In Metazoa, mitochondrial markers are the most commonly used targets for inferring species-level molecular phylogenies due to their extremely low rate of recombination, maternal inheritance, ease of use and fast substitution rate in comparison to nuclear DNA. The mitochondrial control region (CR) is the main non-coding area of the mitochondrial genome and contains the mitochondrial origin of replication and transcription. While sequences of the cytochrome oxidase subunit 1 (COI) and 16S rRNA genes are the prime mitochondrial markers in phylogenetic studies, the highly variable CR is typically ignored and not targeted in such analyses. However, the higher substitution rate of the CR can be harnessed to infer the phylogeny of closely related species, and the use of a non-coding region alleviates biases resulting from both directional and purifying selection. Additionally, complete mitochondrial genome assemblies utilizing next generation sequencing (NGS) data often show exceptionally low coverage at specific regions, including the CR. This can only be resolved by targeted sequencing of this region. Here we provide novel sequence data for the echinoid mitochondrial control region in over 40 species across the echinoid phylogenetic tree. We demonstrate the advantages of directly targeting the CR and adjacent tRNAs to facilitate complementing low coverage NGS data from complete mitochondrial genome assemblies. Finally, we test the performance of this region as a phylogenetic marker both in the lab and in phylogenetic analyses, and demonstrate its superior performance over the other available mitochondrial markers in echinoids. Our target region of the mitochondrial CR (1) facilitates the first thorough investigation of this region across a wide range of echinoid taxa, (2) provides a tool for complementing missing data in NGS experiments, and (3) identifies the CR as a powerful, novel marker for phylogenetic inference in echinoids due to its high variability, lack of selection, and high compatibility across the entire class, outperforming conventional mitochondrial markers.

Influence of chromium hyperdoping on the electronic structure of CH3NH3PbI3 perovskite: a first-principles insight.

PubMed

García, Gregorio; Palacios, Pablo; Menéndez-Proupin, Eduardo; Montero-Alejo, Ana L; Conesa, José C; Wahnón, Perla

2018-02-06

Organic-inorganic hybrid halide perovskites compounds are emerging as new materials with great potential for efficient solar cells. This paper explores the possibility of increasing their photovoltaic efficiency through sub-bandgap absorption by way of the in gap band (IGB) concept. Thus, we assess the formation of an in gap band as well as its effect on the absorption features of Organic-inorganic hybrid halide perovskites CH 3 NH 3 PbI 3 (MAPI). For this task, we use density functional theory (DFT) as well as many-body perturbation methods along to spin-orbit coupling (SOC) to study structural, energetic and electronic properties of partially Cr-substituted MAPI perovskites (CH 3 NH 3 Pb 1-x Cr x I 3 ). Our results reveal that Cr replacement does not lead to an important cell distortion, while the energetic of the substitution process evidences the possibility of obtaining Cr-substituted perovskite. The analysis of the electronic structure shows that Cr 3d-orbitals induce new electronic states in the host semiconductor bandgap, which fulfill the requirements to be considered as an IGB. Precise many-body perturbation methods in G 0 W 0 approach provided an accurate description on the electronic structures as well as the position of the IGB. In short, Pb replacement by Cr could be useful for improved absorption features through new sub-bandgap transitions across the in gap band.

Survey of reproduction management on Canadian dairy farms.

PubMed

Denis-Robichaud, J; Cerri, R L A; Jones-Bitton, A; LeBlanc, S J

2016-11-01

The objectives of this study were to (1) quantify current reproduction management practices, and (2) assess the association between these practices and herd reproductive performance on dairy farms in Canada. A bilingual survey was developed, validated, and administered from March to May 2014 to collect general and reproduction management and performance measures [annual 21-d pregnancy rate (PR), 21-d insemination rate (IR), and conception risk (CR)]. Associations between management practices and reproductive performance measures were tested using linear regression models. A total of 832 questionnaires were completed online and by mail, representing a response rate of 9%. On average, farms had 77 lactating cows (median=50) and 13 dry cows (median=10), and Holstein was the most common breed (92% of herds). Lactating cow housing was tiestall on 61% of the farms, freestall on 37%, and bedded pack on 2%. The average voluntary waiting period was 58 d in milk (DIM). The main reproduction management practice per farm was defined as the means employed for >50% of inseminations. Farms reported their main reproduction management practice for first and subsequent inseminations, respectively, as visual estrus detection (51 and 44% of herds), timed AI (21 and 23% of herds), automated activity monitoring (AAM; 10 and 10% of herds), other management practice (bulls; 2 and 2% of herds), and a combination of management practices (16 and 21% of herds). On farms using visual estrus detection, cows were observed for signs of estrus on average 3.5 times per day, for an average total of 36 min/d. The most common use of reproductive hormones was to synchronize ovulation using Ovsynch (58% of the farms). Average PR, IR, and CR were 17.6, 44.1, and 40.5%, respectively. In linear regression analyses adjusted for confounders, pregnancy rate was significantly associated with geographic region, housing (tiestall: PR=15.4%, freestall: PR=17.6%), herd size (<50 lactating cows: PR=16.2%, 50-100 cows: PR=16.5%, >100 cows: PR=17.8%), voluntary waiting period (≤60 DIM: PR=17.6%, >60 DIM: PR=15.9%), and frequency of insemination per day (once daily: PR=16.6%, twice or more daily: PR=18.1%). The main reproduction management practice at first and subsequent inseminations was divergently associated with IR and CR, but not with PR (visual heat detection: PR=17.4%, timed AI: PR=18.4%, AAM: PR=17.1%, combined practices: PR=18.2%). Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Biofuels and bioenergy production from municipal solid waste commingled with agriculturally-derived biomass

USDA-ARS?s Scientific Manuscript database

The USDA in partnership with Salinas Valley Solid Waste Authority (SVSWA) and CR3, a technology holding company from Reno, NV, has introduced a biorefinery concept whereby agriculturally- derived biomass is commingled with municipal solid waste (MSW) to produce bioenergy. This team, which originally...

Gifted-Child Pedagogy: Meaningful Chimera?

ERIC Educational Resources Information Center

Coleman, Laurence J.

2003-01-01

This article explores the concept of gifted-child pedagogy (GCP) and consequences of adopting a GCP model. It argues that use of the term GCP can create a faux reality that GCP exists and that teachers who do not have this particular pedagogy cannot help gifted children. (Contains 7 references.) (CR)

Sonocatalytic rapid degradation of Congo red dye from aqueous solution using magnetic Fe0/polyaniline nanofibers.

PubMed

Das, Raghunath; Bhaumik, Madhumita; Giri, Somnath; Maity, Arjun

2017-07-01

Nano-sized magnetic Fe 0 /polyaniline (Fe 0 /PANI) nanofibers were used as an effective material for sonocatalytic degradation of organic anionic Congo red (CR) dye. Fe 0 /PANI , was synthesized via reductive deposition of nano-Fe 0 onto the PANI nanofibers at room temperature. Prepared catalyst was characterized using HR-TEM, FE-SEM, XRD, FTIR instruments. The efficacy of catalyst in removing CR was assessed colorimetrically using UV-visible spectroscopy under different experimental conditions such as % of Fe 0 loading into the composite material, solution pH, initial concentration of dye, catalyst dosage, temperature and ultrasonic power. The optimum conditions for sonocatalytic degradation of CR were obtained at catalyst concentrations=500mg.L -1 , concentration of CR=200ppm, solution pH=neutral (7.0), temperature=30°C, % of Fe 0 loading=30% and 500W ultrasonic power. The experimental results showed that ultrasonic process could remove 98% of Congo red within 30min with higher Q max value (Q max =446.4 at 25°C). The rate of degradation of CR dye was much faster in this ultrasonic technique rather than conventional adsorption process. The degradation efficiency declined with the addition of common inorganic salts (NaCl, Na 2 CO 3 , Na 2 SO 4 and Na 3 PO 4 ). The rate of degradation suppressed more with increasing salt concentration. Kinetic and isotherm studies indicated that the degradation of CR provides pseudo-second order rate kinetic and Langmuir isotherm model compared to all other models tested. The excellent high degradation capacity of Fe 0 /PANI under ultrasonic irradiation can be explained on the basis of the formation of active hydroxyl radicals (OH) and subsequently a series of free radical reactions. Copyright © 2017 Elsevier B.V. All rights reserved.

Translation, Cross-cultural Adaptation and Psychometric Validation of the Korean-Language Cardiac Rehabilitation Barriers Scale (CRBS-K)

PubMed Central

2017-01-01

Objective To perform a translation and cross-cultural adaptation of the Cardiac Rehabilitation Barriers Scale (CRBS) for use in Korea, followed by psychometric validation. The CRBS was developed to assess patients' perception of the degree to which patient, provider and health system-level barriers affect their cardiac rehabilitation (CR) participation. Methods The CRBS consists of 21 items (barriers to adherence) rated on a 5-point Likert scale. The first phase was to translate and cross-culturally adapt the CRBS to the Korean language. After back-translation, both versions were reviewed by a committee. The face validity was assessed in a sample of Korean patients (n=53) with history of acute myocardial infarction that did not participate in CR through semi-structured interviews. The second phase was to assess the construct and criterion validity of the Korean translation as well as internal reliability, through administration of the translated version in 104 patients, principle component analysis with varimax rotation and cross-referencing against CR use, respectively. Results The length, readability, and clarity of the questionnaire were rated well, demonstrating face validity. Analysis revealed a six-factor solution, demonstrating construct validity. Cronbach's alpha was greater than 0.65. Barriers rated highest included not knowing about CR and not being contacted by a program. The mean CRBS score was significantly higher among non-attendees (2.71±0.26) than CR attendees (2.51±0.18) (p<0.01). Conclusion The Korean version of CRBS has demonstrated face, content and criterion validity, suggesting it may be useful for assessing barriers to CR utilization in Korea. PMID:29201826

Effects of Chromium Picolinate on Vascular Reactivity and Cardiac Ischemia Reperfusion Injury in Spontaneously Hypertensive Rats

PubMed Central

Abebe, Worku; Liu, Jun Yao; Wimborne, Hereward; Mozaffari, Mahmood S.

2013-01-01

Chromium picolinate [Cr(pic)3] is a nutritional supplement widely promoted to exert beneficial metabolic effects in patients with type 2 diabetes/impaired glucose tolerance. Frequent comorbidities in these individuals include systemic hypertension, abnormal vascular function and ischemic heart disease but information on effects of the supplement on these aspects is sparse. Utilizing male spontaneously hypertensive rats (SHR), we examined potential impact of Cr(pic)3 on blood pressure, vascular reactivity and myocardial ischemia reperfusion injury (IRI). Dietary Cr(pic)3 supplementation (as 10 mg chromium/kg diet for 6 weeks) did not affect blood pressure of the SHR. Also, neither norepinephrine (NE) and potassium chloride (KCl)-induced contractility nor sodium nitroprusside (SNP)-induced relaxation of aortic smooth muscle from the SHR was altered by Cr(pic)3 treatment. However, Cr(pic)3 augmented endothelium-dependent relaxation of aortas, produced by acetylcholine (ACh), and this effect was abolished by N-nitro-L-arginine methyl ester (L-NAME) suggesting induction of nitric oxide (NO) production/release. Treatment with Cr(pic)3 did not affect baseline coronary flow rate and rate-pressure-product (RPP) or infarct size following regional IRI. Nonetheless, Cr(pic)3 treatment was associated with improved coronary flow and recovery of myocardial contractility and relaxation following ischemia reperfusion insult. In conclusion, dietary Cr(pic)3 treatment of SHR neither alters blood pressure nor vascular smooth muscle reactivity, but causes enhancement of endothelium-dependent vasorelaxation associated with NO production/release. Additionally, while the treatment does not affect infarct size, it improves functional recovery of the viable portion of the myocardium following IRI. PMID:20885007

Effects of chromium picolinate on vascular reactivity and cardiac ischemia-reperfusion injury in spontaneously hypertensive rats.

PubMed

Abebe, Worku; Liu, Jun Yao; Wimborne, Hereward; Mozaffari, Mahmood S

2010-01-01

Chromium picolinate [Cr(pic)(3)] is a nutritional supplement widely promoted to exert beneficial metabolic effects in patients with type 2 diabetes/impaired glucose tolerance. Frequent comorbidities in these individuals include systemic hypertension, abnormal vascular function and ischemic heart disease, but information on the effects of the supplement on these aspects is sparse. Utilizing male spontaneously hypertensive rats (SHR), we examined the potential impact of Cr(pic)(3) on blood pressure, vascular reactivity and myocardial ischemia-reperfusion injury (IRI). Dietary Cr(pic)(3) supplementation (as 10 mg chromium/kg diet for six weeks) did not affect blood pressure of the SHR. Also, neither norepinephrine (NE) and potassium chloride (KCl)-induced contractility nor sodium nitroprusside (SNP)-induced relaxation of aortic smooth muscle from the SHR was altered by Cr(pic)(3) treatment. However, Cr(pic)(3) augmented endothelium-dependent relaxation of aortas, produced by acetylcholine (ACh), and this effect was abolished by N-nitro-L-arginine methyl ester (L-NAME), suggesting induction of nitric oxide (NO) production/release. Treatment with Cr(pic)(3) did not affect baseline coronary flow rate and rate-pressure-product (RPP) or infarct size following regional IRI. Nonetheless, Cr(pic)(3) treatment was associated with improved coronary flow and recovery of myocardial contractility and relaxation following ischemia-reperfusion insult. In conclusion, dietary Cr(pic)(3) treatment of SHR alters neither blood pressure nor vascular smooth muscle reactivity but causes enhancement of endothelium-dependent vasorelaxation associated with NO production/release. Additionally, while the treatment does not affect infarct size, it improves functional recovery of the viable portion of the myocardium following IRI.

Chromatographic speciation of Cr(III)-species, inter-species equilibrium isotope fractionation and improved chemical purification strategies for high-precision isotope analysis.

PubMed

Larsen, K K; Wielandt, D; Schiller, M; Bizzarro, M

2016-04-22

Chromatographic purification of chromium (Cr), which is required for high-precision isotope analysis, is complicated by the presence of multiple Cr-species with different effective charges in the acid digested sample aliquots. The differing ion exchange selectivity and sluggish reaction rates of these species can result in incomplete Cr recovery during chromatographic purification. Because of large mass-dependent inter-species isotope fractionation, incomplete recovery can affect the accuracy of high-precision Cr isotope analysis. Here, we demonstrate widely differing cation distribution coefficients of Cr(III)-species (Cr(3+), CrCl(2+) and CrCl2(+)) with equilibrium mass-dependent isotope fractionation spanning a range of ∼1‰/amu and consistent with theory. The heaviest isotopes partition into Cr(3+), intermediates in CrCl(2+) and the lightest in CrCl2(+)/CrCl3°. Thus, for a typical reported loss of ∼25% Cr (in the form of Cr(3+)) through chromatographic purification, this translates into 185 ppm/amu offset in the stable Cr isotope ratio of the residual sample. Depending on the validity of the mass-bias correction during isotope analysis, this further results in artificial mass-independent effects in the mass-bias corrected (53)Cr/(52)Cr (μ(53)Cr* of 5.2 ppm) and (54)Cr/(52)Cr (μ(54)Cr* of 13.5 ppm) components used to infer chronometric and nucleosynthetic information in meteorites. To mitigate these fractionation effects, we developed strategic chemical sample pre-treatment procedures that ensure high and reproducible Cr recovery. This is achieved either through 1) effective promotion of Cr(3+) by >5 days exposure to HNO3H2O2 solutions at room temperature, resulting in >∼98% Cr recovery for most types of sample matrices tested using a cationic chromatographic retention strategy, or 2) formation of Cr(III)-Cl complexes through exposure to concentrated HCl at high temperature (>120 °C) for several hours, resulting in >97.5% Cr recovery using a chromatographic elution strategy that takes advantage of the slow reaction kinetics of de-chlorination of Cr in dilute HCl at room temperature. These procedures significantly improve cation chromatographic purification of Cr over previous methods and allow for high-purity Cr isotope analysis with a total recovery of >95%. Copyright © 2016 Elsevier B.V. All rights reserved.

Chromatographic speciation of Cr(III)-species, inter-species equilibrium isotope fractionation and improved chemical purification strategies for high-precision isotope analysis

PubMed Central

Larsen, K.K.; Wielandt, D.; Schiller, M.; Bizzarro, M.

2016-01-01

Chromatographic purification of chromium (Cr), which is required for high-precision isotope analysis, is complicated by the presence of multiple Cr-species with different effective charges in the acid digested sample aliquots. The differing ion exchange selectivity and sluggish reaction rates of these species can result in incomplete Cr recovery during chromatographic purification. Because of large mass-dependent inter-species isotope fractionation, incomplete recovery can affect the accuracy of high-precision Cr isotope analysis. Here, we demonstrate widely differing cation distribution coefficients of Cr(III)-species (Cr3+, CrCl2+ and CrCl2+) with equilibrium mass-dependent isotope fractionation spanning a range of ~1‰/amu and consistent with theory. The heaviest isotopes partition into Cr3+, intermediates in CrCl2+ and the lightest in CrCl2+/CrCl3°. Thus, for a typical reported loss of ~25% Cr (in the form of Cr3+) through chromatographic purification, this translates into 185 ppm/amu offset in the stable Cr isotope ratio of the residual sample. Depending on the validity of the mass-bias correction during isotope analysis, this further results in artificial mass-independent effects in the mass-bias corrected 53Cr/52Cr (μ53 Cr* of 5.2 ppm) and 54Cr/52Cr (μ54Cr* of 13.5 ppm) components used to infer chronometric and nucleosynthetic information in meteorites. To mitigate these fractionation effects, we developed strategic chemical sample pre-treatment procedures that ensure high and reproducible Cr recovery. This is achieved either through 1) effective promotion of Cr3+ by >5 days exposure to HNO3 —H2O2 solutions at room temperature, resulting in >~98% Cr recovery for most types of sample matrices tested using a cationic chromatographic retention strategy, or 2) formation of Cr(III)-Cl complexes through exposure to concentrated HCl at high temperature (>120 °C) for several hours, resulting in >97.5% Cr recovery using a chromatographic elution strategy that takes advantage of the slow reaction kinetics of de-chlorination of Cr in dilute HCl at room temperature. These procedures significantly improve cation chromatographic purification of Cr over previous methods and allow for high-purity Cr isotope analysis with a total recovery of >95%. PMID:27036208

Isolation and characterization of a chromium-resistant bacterium Serratia sp. Cr-10 from a chromate-contaminated site.

PubMed

Zhang, Kundi; Li, Fuli

2011-05-01

A novel bacterium, Cr-10, was isolated from a chromium-contaminated site and capable of removing toxic chromium species from solution by reducing hexavalent chromium to an insoluble precipitate. Sequence analysis of 16S rRNA gene of strain Cr-10 showed that it was most closely related to Serratia rubidaea JCM 1240(T) (97.68%). Physiological and chemotaxonomic data also supported that strain Cr-10 was identified as Serratia sp., a genus which was never specially reported chromate-resistant before. Serratia sp., Cr-10 was tolerant to a concentration of 1,500 mg Cr(VI) L(-1), which was the highest level reported until now. The optimum pH and temperature for reduction of Cr(VI) by Serratia sp. Cr-10 were found to be 7.0 and 37 °C, respectively. The Cr(VI) reduction was significantly influenced by additional carbon sources, and among them fructose and lactose offered maximum reduction, with a rate of 0.28 and 0.25 mg Cr(VI) L(-1) h(-1), respectively. The cell-free extracts and filtrate of the culture were able to reduce Cr(VI) while concentration of total chromium remained stable in the process, indicating that the enzyme-catalyzed mechanism was applied in Cr(VI) reduction by the isolate. Additionally, it was found that there was hardly any chromium on the cell surface of the strain, further supporting that reduction, rather than bioadsorption, plays a major role in the Cr(VI) removal.

Control of exposure to hexavalent chromium concentration in shielded metal arc welding fumes by nano-coating of electrodes.

PubMed

Sivapirakasam, S P; Mohan, Sreejith; Santhosh Kumar, M C; Thomas Paul, Ashley; Surianarayanan, M

2017-04-01

Background Cr(VI) is a suspected human carcinogen formed as a by-product of stainless steel welding. Nano-alumina and nano-titania coating of electrodes reduced the welding fume levels. Objective To investigate the effect of nano-coating of welding electrodes on Cr(VI) formation rate (Cr(VI) FR) from a shielded metal arc welding process. Methods The core welding wires were coated with nano-alumina and nano-titania using the sol-gel dip coating technique. Bead-on plate welds were deposited on SS 316 LN plates kept inside a fume test chamber. Cr(VI) analysis was done using an atomic absorption spectrometer (AAS). Results A reduction of 40% and 76%, respectively, in the Cr(VI) FR was observed from nano-alumina and nano-titania coated electrodes. Increase in the fume level decreased the Cr(VI) FR. Discussion Increase in fume levels blocked the UV radiation responsible for the formation of ozone thereby preventing the formation of Cr(VI).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prates, P. B.; Maliska, A. M.; Ferreira, A. S.

A thermodynamic analysis of the Cr-Ge system suggested that it was possible to produce a nanostructured Cr{sub 3}Ge phase by mechanical alloying. The same analysis showed that, due to low activation energies, Cr-poor crystalline and/or amorphous alloy could also be formed. In fact, when the experiment was performed, Cr{sub 11}Ge{sub 19} and amorphous phases were present for small milling times. For milling times larger than 15 h these additional phases decomposed and only the nanostructured Cr{sub 3}Ge phase remained up to the highest milling time used (32 h). From the differential scanning calorimetry measurements, the Avrami exponent n was obtained, indicating thatmore » the nucleation and growth of the nanostructured Cr{sub 3}Ge phase may be restricted to one or two dimensions, where the Cr and Ge atoms diffuse along the surface and grain boundaries. In addition, contributions from three-dimensional diffusion with a constant nucleation rate may be present. The thermal diffusivity of the nanostructured Cr{sub 3}Ge phase was determined by photoacoustic absorption spectroscopy measurements.« less

Synthesis and Luminescence Characteristics of Cr 3+ doped Y 3Al 5O 12 Phosphors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Brenda A.; Dabestani, Reza T.; Lewis, Linda A.

2015-10-01

Luminescence performance of yttrium aluminum garnet (Y 3Al 5O 12) phosphors as a function of Cr 3+ concentration has been investigated via two different wet-chemical synthesis techniques, direct- (DP) and hydrothermal-precipitation (HP). Using either of these methods, the red-emitting phosphor [Y 3Al 5-xCr xO 12 (YAG: Cr 3+)] showed similar photoluminescence (PL) intensities once the dopant concentration was optimized. Specifically, the YAG: Cr 3+ PL emission intensity reached a maximum at Cr3+ concentrations of x = 0.02 (0.4 at.%) and x = 0.13 (2.6 at.%) for DP and HP processed samples, respectively. The results indicated the strong influence of themore » processing method on the optimized YAG: Cr 3+ performance, where a more effective energy transfer rate between a pair of Cr3+ activators at low concentration levels was observed by using the DP synthesis technique. Development of a highly efficient phosphor, using a facile synthesis approach, could significantly benefit consumer and industrial applications by improving the operational efficiency of a wide range of practical devices.« less

Effect of different alloyed layers on the high temperature oxidation behavior of newly developed Ti 2AlNb-based alloys

NASA Astrophysics Data System (ADS)

Wu, Hongyan; Zhang, Pingze; Zhao, Haofeng; Wang, Ling; Xie, Aigen

2011-01-01

The application of titanium aluminide orthorhombic alloys (O-phase alloys) as potential materials in aircraft and jet engines was limited by their poor oxidation resistance at high temperature. The Ti 2AlNb-based alloys were chromised (Cr), chromium-tungstened (Cr-W) and nickel-chromised (Ni-Cr) by the double glow plasma surface alloying process to improve their high temperature oxidation resistance. The discontinuous oxidative behavior of Cr, Cr-W and Ni-Cr alloyed layers on Ti 2AlNb-based alloy at 1093 K was explored in this study. After exposing at 1093 K, the TiO 2 layer was formed on the bare alloy and accompanied by the occurrence of crack, which promoted oxidation rate. The oxidation behavior of Ti 2AlNb-based alloys was improved by surface alloying due to the formation of protective Al 2O 3 scale or continuous and dense NiCr 2O 4 film. The Ni-Cr alloyed layer presented the best high-temperature oxidation resistance among three alloyed layers.

Exploration of Individual and Family Factors Related to Community Reintegration in Veterans With Traumatic Brain Injury.

PubMed

Moriarty, Helene; Winter, Laraine; Robinson, Keith; True, Gala; Piersol, Catherine; Vause-Earland, Tracey; Iacovone, Dolores Blazer; Holbert, Laura; Newhart, Brian; Fishman, Deborah; Short, Thomas H

2015-01-01

Community reintegration (CR) poses a major problem for military veterans who have experienced a traumatic brain injury (TBI). Factors contributing to CR after TBI are poorly understood. To address the gap in knowledge, an ecological framework was used to explore individual and family factors related to CR. Baseline data from an intervention study with 83 veterans with primarily mild to moderate TBI were analyzed. Instruments measured CR, depressive symptoms, physical health, quality of the relationship with the family member, and sociodemographics. Posttraumatic stress disorder and TBI characteristics were determined through record review. Five variables that exhibited significant bivariate relationships with CR (veteran rating of quality of relationship, physical functioning, bodily pain, posttraumatic stress disorder diagnosis, and depressive symptoms) were entered into hierarchical regression analysis. In the final analysis, the five variables together accounted for 35% of the variance, but only depression was a significant predictor of CR, with more depressed veterans exhibiting lower CR. Efforts to support CR of Veterans with TBI should carefully assess and target depression, a modifiable factor. © The Author(s) 2015.

Very Hard Corrosion-Resistant Roll-Bonded Cr Coating on Mild Steel in Presence of Graphite

NASA Astrophysics Data System (ADS)

Kumar, Pankaj; Khara, S.; Shekhar, S.; Mondal, K.

2017-12-01

The present work discusses the development of very hard Cr and Cr-carbide coating by roll bonding of Cr powder on a mild steel followed by annealing at 800, 1000, 1100 and 1200 °C with and without the presence of graphite powder packing in argon environment. In addition, the effect of a roll skin pass of 5% prior to the application of coating was studied. The presence of graphite allows diffusion of both carbon and Cr in the mild steel substrate, leading to the formation of Cr-carbide on the outer surface, making the surface very hard (VHN 1800). Depending on the annealing temperature and processing condition, diffusion layer thickness of Cr is found to be in the range of 10-250 μm with Cr content of 12.5-15 wt.% across the diffusion layer. Excellent stable passivity of the coated surface is observed in 0.2 N H2SO4, which is comparable to a highly passivating 304 stainless steel, and very low corrosion rate of the coating is observed as compared to the substrate mild steel.

Spatial and temporal consumption dynamics of trout in catch-and-release areas in Arkansas tailwaters

USGS Publications Warehouse

Flinders, John M.; Magoulick, Daniel D.

2017-01-01

Restrictive angling regulations in tailwater trout fisheries may be unsuccessful if food availability limits energy for fish to grow. We examined spatial and temporal variation in energy intake and growth in populations of Brown Trout Salmo trutta and Rainbow Trout Oncorhynchus mykiss within three catch-and-release (C-R) areas in Arkansas tailwaters to evaluate food availability compared with consumption. Based on bioenergetic simulations, Rainbow Trout fed at submaintenance levels in both size-classes (≤400 mm TL, >400 mm TL) throughout most seasons. A particular bottleneck in food availability occurred in the winter for Rainbow Trout when the daily ration was substantially below the minimum required for maintenance, despite reduced metabolic costs associated with lower water temperatures. Rainbow Trout growth rates followed a similar pattern to consumption with negative growth rates during the winter periods. All three size-classes (<250 mm TL, 250–400 mm TL, >400 mm TL) of Brown Trout experienced high growth rates and limited temporal bottlenecks in food availability. We observed higher mean densities for Rainbow Trout (47–342 fish/ha) than for Brown Trout (3–84 fish/ha) in all C-R areas. Lower densities of Brown Trout coupled with an ontogenetic shift towards piscivory may have allowed for higher growth rates and sufficient consumption rates to meet energetic demands. Brown Trout at current densities were more effective in maintaining adequate growth rates and larger sizes in C-R areas than were Rainbow Trout. Bioenergetic simulations suggest that reducing stocking levels of Rainbow Trout in the tailwaters may be necessary in order to achieve increased catch rates of larger trout in the C-R areas.

Long-term results with oral fluoropyrimidines and oxaliplatin-based preoperative chemoradiotherapy in patients with resectable rectal cancer. A single-institution experience.

PubMed

Díaz Beveridge, Robert; Aparicio, Jorge; Tormo, Alejandro; Estevan, Rafael; Artes, Josefina; Giménez, Alejandra; Segura, Ángel; Roldán, Susana; Palasí, Rosana; Ramos, David

2012-06-01

Neoadjuvant 5-FU-based chemoradiotherapy in resectable rectal cancer (RC) is a standard of treatment. The use of oral fluoropyrimidines and new agents such as oxaliplatin may improve efficacy and tolerance. Between 1999 and 2009, 126 RC patients with T3-T4 and/or N+ disease were given three successive protocols: UFT (32), UFT-oxaliplatin (75) and capecitabine-oxaliplatin (19), alongside 45 Gy of radiotherapy; with surgery 4-6 weeks after. Adjuvant treatment was given in all patients. The primary objective was pathologic complete response (pCR). Preoperative therapy was well tolerated, with no toxic deaths and a 15% grade 3-4 toxicity rate. Eighty-five percent of patients received the full chemotherapy dose, 56% had an abdominoperineal resection, 6% reinterventions and 57% received the full adjuvant chemotherapy planned. The pCR rate was 13%. The downstaging rate was 80%; 8% had progression of disease. The relapse rate was 20%, with local relapse in 6%. By 5 years of followup, 92% of relapses had occurred. Median follow-up was 73 months, 5- and 10-year disease-free survival rates were 75% and 50%, and 5- and 10-year overall survival rates were 79% and 66% respectively. There was no benefit from the use of oxaliplatin regarding survival or pCR rates. Older patients had worse long-term outcomes. Neoadjuvant chemoradiotherapy with oral fluoropyrimidines and oxaliplatin is feasible and well tolerated. The risk of early progression is low. However, there was no added benefit with the use of oxaliplatin. There were no relapses in patients with pCR. The role of adjuvant chemotherapy is unclear.

Elementary surface processes during reactive magnetron sputtering of chromium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monje, Sascha; Corbella, Carles, E-mail: carles.corbella@rub.de; Keudell, Achim von

2015-10-07

The elementary surface processes occurring on chromium targets exposed to reactive plasmas have been mimicked in beam experiments by using quantified fluxes of Ar ions (400–800 eV) and oxygen atoms and molecules. For this, quartz crystal microbalances were previously coated with Cr thin films by means of high-power pulsed magnetron sputtering. The measured growth and etching rates were fitted by flux balance equations, which provided sputter yields of around 0.05 for the compound phase and a sticking coefficient of O{sub 2} of 0.38 on the bare Cr surface. Further fitted parameters were the oxygen implantation efficiency and the density of oxidationmore » sites at the surface. The increase in site density with a factor 4 at early phases of reactive sputtering is identified as a relevant mechanism of Cr oxidation. This ion-enhanced oxygen uptake can be attributed to Cr surface roughening and knock-on implantation of oxygen atoms deeper into the target. This work, besides providing fundamental data to control oxidation state of Cr targets, shows that the extended Berg's model constitutes a robust set of rate equations suitable to describe reactive magnetron sputtering of metals.« less

Detecting the spatial chirp signals by fractional Fourier lens with transformation materials

NASA Astrophysics Data System (ADS)

Chen, J.; Hu, J.

2018-02-01

Fractional Fourier transform (FrFT) is the general form of the Fourier transform and is an important tool in signal processing. As one typical application of FrFT, detecting the chirp rate (CR, or known as the rate of frequency change) of a chirp signal is important in many optical measurements. The optical FrFT that based on graded index lens fails to detect the high CR chirp because the short wave propagation distance of the impulse in the lens will weaken the paraxial approximation condition. With the help of transformation optics, the improved FrFT lens is proposed to adjust the high CR as well as the impulse location of the given input chirp signal. The designed transformation materials can implement the effect of space compression, making the input chirp signal is equivalent to have lower CR, therefore the system can satisfy the paraxial approximation better. As a result, this lens can improve the detection precision for the high CR. The numerical simulations verified the design. The proposed device may have both theoretical and practical values, and the design demonstrates the ability and flexibility of TO in spatial signal processing.

Efficient anti-corrosive coating of cold-rolled steel in a seawater environment using an oil-based graphene oxide ink.

PubMed

Singhbabu, Y N; Sivakumar, B; Singh, J K; Bapari, H; Pramanick, A K; Sahu, Ranjan K

2015-05-07

We report the production of an efficient anti-corrosive coating of cold-rolled (CR) steel in a seawater environment (∼3.5 wt% NaCl aqueous solution) using an oil-based graphene oxide ink. The graphene oxide was produced by heating Aeschynomene aspera plant as a carbon source at 1600 °C in an argon atmosphere. The ink was prepared by cup-milling the mixture of graphene oxide and sunflower oil for 10 min. The coating of ink on the CR steel was made using the dip-coating method, followed by curing at 350 °C for 10 min in air atmosphere. The results of the potentiodynamic polarization show that the corrosion rate of bare CR steel decreases nearly 10,000-fold by the ink coating. Furthermore, the salt spray test results show that the red rusting in the ink-coated CR steel is initiated after 100 h, in contrast to 24 h and 6 h in the case of oil-coated and bare CR steel, respectively. The significant decrease in the corrosion rate by the ink-coating is discussed based on the impermeability of graphene oxide to the corrosive ions.

Inter-conversion of Chromium Species During Air Sampling: Effects of O3, NO2, SO2, Particle Matrices, Temperature and Humidity

PubMed Central

Huang, Lihui; Fan, Zhihua (Tina); Yu, Chang Ho; Hopke, Philip K.; Lioy, Paul J.; Buckley, Brian T.; Lin, Lin; Ma, Yingjun

2013-01-01

The inter-conversion between Cr(VI), a pulmonary carcinogen, and Cr(III), an essential human nutrient, poses challenges to the measurement of Cr(VI) in airborne particles. Chamber and field tests were conducted to identify the factors affecting Cr(VI)-Cr(III) inter-conversion in the basic filter medium under typical sampling conditions. In the chamber tests, isotopically enriched 53Cr(VI) and 50Cr(III) were spiked on diesel particulate matter (DPM) and secondary organic aerosol (SOA) that were pre-collected on a basic MCE filter. The filter samples were then exposed to clean air or the air containing SO2 (50 and 160 ppb), 100 ppb O3, or 150 ppb NO2 for 24 hours at 16.7 LPM flow rate at designated temperature (20 and 31°C) and RH (40% and 70%) conditions. Exposure to 160 ppb SO2 had the greatest effect on 53Cr(VI) reduction, with 53Cr(VI) recovery of 31.7 ± 15.8% (DPM) and 42.0 ± 7.9% (SOA). DPM and SOA matrix induced 53Cr(VI) reduction when exposed to clean air while reactive oxygen species in SOA could promote 50Cr(III) oxidation. Deliquescence when RH increased from 40% to 70% led to conversion of Cr(III) in SOA, whereas oxidized organics in DPM and SOA enhanced hygroscopicity and thus facilitated Cr(VI) reduction. Field tests showed seasonal variation of Cr(VI)-Cr(III) inter-conversion during sampling. Correction of the inter-conversion using USEPA method 6800 is recommended to improve accuracy of ambient Cr(VI) measurements. PMID:23550818

Oxidation kinetics of Haynes 230 alloy in air at temperatures between 650 and 850 °C

NASA Astrophysics Data System (ADS)

Jian, Li; Jian, Pu; Bing, Hua; Xie, Guangyuan

Haynes 230 alloy was oxidized in air at temperatures between 650 and 850 °C. Thermogravimetry was used to measure the kinetics of oxidation. The formed oxides were identified by the thin film (small angle) X-ray diffraction technique. Cr 2O 3 and MnCr 2O 4 were found in the oxide scale. Multi-stage oxidation kinetics was observed, and each stage follows Wagner's parabolic law. The first slow oxidation stage corresponded to the growth of an Cr 2O 3 layer, controlled by Cr ions diffusion through the dense Cr 2O 3 scale. The faster second stage was a result of rapid diffusion of Mn ions passing through the established Cr 2O 3 scale to form MnCr 2O 4 on top of the Cr 2O 3 layer. A duplex oxide scale is expected. The third stage, with a rate close to that of the first stage, only appeared for oxidation in the intermediate temperature range, i.e., 750-800 °C, which can be explained by the interruption of the Mn flux that forms MnCr 2O 4.

Oxidation behavior of TD-NiCr in a dynamic high temperature environment

NASA Technical Reports Server (NTRS)

Tenney, D. R.; Young, C. T.; Herring, H. W.

1974-01-01

The oxidation behavior of TD-NiCr has been studied in static and high-speed flowing air environments at 1100 and 1200 C. It has been found that the stable oxide morphologies formed on the specimens exposed to the static and dynamic environments were markedly different. The faceted crystal morphology characteristic of static oxidation was found to be unstable under high-temperature, high-speed flow conditions and was quickly replaced by a porous NiO 'mushroom' type structure. Also, it was found that the rate of formation of CrO3 from Cr2O3 was greatly enhanced by high gas velocity conditions. The stability of Cr2-O3 was found to be greatly improved by the presence of an outer NiO layer, even though the NiO layer was very porous. An oxidation model is proposed to explain the observed microstructures and overall oxidation behavior of TD-NiCr alloys.

Initial tension loss in cerclage cables.

PubMed

Ménard, Jérémie; Émard, Maxime; Canet, Fanny; Brailovski, Vladimir; Petit, Yvan; Laflamme, George Y

2013-10-01

Cerclage cables, frequently used in the management of fractures and osteotomies, are associated with a high failure rate and significant loosening during surgery. This study compared the capacity to maintain tension of different types of orthopaedic cable systems. Multifilament Cobalt-Chrome (CoCr) cables with four different crimp/clamp devices (DePuy, Stryker, Zimmer and Smith&Nephew) and one non-metallic Nylon (Ny) cable from Kinamed were instrumented with a load cell to measure tension during insertion. Significant tension loss was observed with crimping for all cables (P<0.05). Removing the tensioner led to an additional unexpected tension loss (CoCr-DePuy: 18%, CoCr-Stryker: 29%, CoCr-Smith&Nephew: 33%, Ny: 46%, and CoCr-Zimmer: 52%). The simple CoCr (DePuy) cable system outperformed the more sophisticated locking devices due to its significantly better ability to prevent tension loss. Copyright © 2013 Elsevier Inc. All rights reserved.

Electrophoretic deposition of carbon nanotube on reticulated vitreous carbon for hexavalent chromium removal in a biocathode microbial fuel cell

NASA Astrophysics Data System (ADS)

Fei, Kangqing; Song, Tian-shun; Wang, Haoqi; Zhang, Dalu; Tao, Ran; Xie, Jingjing

2017-10-01

For Cr(VI)-removal microbial fuel cell (MFC), a more efficient biocathode in MFCs is required to improve the Cr(VI) removal and electricity generation. RVC-CNT electrode was prepared through the electrophoretic deposition of carbon nanotube (CNT) on reticulated vitreous carbon (RVC). The power density of MFC with an RVC-CNT electrode increased to 132.1 ± 2.8 mW m-2, and 80.9% removal of Cr(VI) was achieved within 48 h; compared to only 44.5% removal of Cr(VI) in unmodified RVC. Cyclic voltammetry, energy-dispersive spectrometry and X-ray photoelectron spectrometry showed that the RVC-CNT electrode enhanced the electrical conductivity and the electron transfer rate; and provided more reaction sites for Cr(VI) reduction. This approach provides process simplicity and a thickness control method for fabricating three-dimensional biocathodes to improve the performance of MFCs for Cr(VI) removal.

Fixation and partitioning of heavy metals in slag after incineration of sewage sludge.

PubMed

Chen, Tao; Yan, Bo

2012-05-01

Fixation of heavy metals in the slag produced during incineration of sewage sludge will reduce emission of the metals to the atmosphere and make the incineration process more environmentally friendly. The effects of incineration conditions (incineration temperature 500-1100°C, furnace residence time 0-60min, mass fraction of water in the sludge 0-75%) on the fixation rates and species partitioning of Cd, Pb, Cr, Cu, Zn, Mn and Ni in slag were investigated. When the incineration temperature was increased from 500 to 1100°C, the fixation rate of Cd decreased from 87% to 49%, while the fixation rates of Cu and Mn were stable. The maximum fixation rates for Pb and Zn and for Ni and Cr were reached at 900 and 1100°C, respectively. The fixation rates of Cu, Ni, Cd, Cr and Zn decreased as the residence time increased. With a 20min residence time, the fixation rates of Pb and Mn were low. The maximum fixation rates of Ni, Mn, Zn, Cu and Cr were achieved when the mass fraction of water in the sludge was 55%. The fixation rate of Cd decreased as the water mass fraction increased, while the fixation rate of Pb increased. Partitioning analysis of the metals contained in the slag showed that increasing the incineration temperature and residence time promoted complete oxidation of the metals. This reduced the non-residual fractions of the metals, which would lower the bioavailability of the metals. The mass fraction of water in the sludge had little effect on the partitioning of the metals. Correlation analysis indicated that the fixation rates of heavy metals in the sludge and the forms of heavy metals in the incinerator slag could be controlled by optimization of the incineration conditions. These results show how the bioavailability of the metals can be reduced for environmentally friendly disposal of the incinerator slag. Copyright © 2011 Elsevier Ltd. All rights reserved.

Oxidation behaviour of silicon-free tungsten alloys for use as the first wall material

NASA Astrophysics Data System (ADS)

Koch, F.; Brinkmann, J.; Lindig, S.; Mishra, T. P.; Linsmeier, Ch

2011-12-01

The use of self-passivating tungsten alloys as armour material of the first wall of a fusion power reactor may be advantageous concerning safety issues. In earlier studies good performance of the system W-Cr-Si was demonstrated. Thin films of such alloys showed a strongly reduced oxidation rate compared to pure tungsten. However, the formation of brittle tungsten silicides may be disadvantageous for the powder metallurgical production of bulk W-Cr-Si alloys if a good workability is needed. This paper shows the results of screening tests to identify suitable silicon-free alloys with distinguished self-passivation and a potentially good workability. Of all the tested systems W-Cr-Ti alloys showed the most promising results. The oxidation rate was even lower than the one of W-Cr-Si alloys, the reduction factor was about four orders of magnitude compared to pure tungsten. This performance could be conserved even if the content of alloying elements was reduced.

The Influence of Comprehensive Cardiac Rehabilitation on Heart Rate Variability Indices after CABG is More Effective than after PCI.

PubMed

Szmigielska, Katarzyna; Szmigielska-Kapłon, Anna; Jegier, Anna

2018-02-01

The aim of this study was to evaluate the influence of cardiac rehabilitation (CR) on heart rate variability (HRV) indices in men with coronary artery disease (CAD) treated with percutaneous coronary intervention (PCI) or coronary artery bypass graft surgery (CABG). The study population consisted of 131 male patients with CAD prospectively and consecutively admitted to CR after PCI n = 72, or CABG n = 59. Participants performed cycle ergometer interval training for 45 min three times a week for 8 weeks. At baseline and after 8 weeks, all patients underwent the HRV assessment. HRV indices in CAGB survivals were significantly lower in comparison to PCI patients at baseline. Significant increases were seen for SDNN, rMSSD, and HF in the CABG group and only in HF component in PCI group after 8 weeks of CR. Eight weeks of CR seems to be more effective in CABG patients than patients after PCI.

Cyclic oxidation behavior of plasma sprayed NiCrAlY/WC-Co/cenosphere coating

NASA Astrophysics Data System (ADS)

Mathapati, Mahantayya; Ramesh M., R.; Doddamani, Mrityunjay

2018-04-01

Components working at elevated temperature like boiler tubes of coal and gas fired power generation plants, blades of gas and steam turbines etc. experience degradation owing to oxidation. Oxidation resistance of such components can be increased by developing protective coatings. In the present investigation NiCrAlY-WC-Co/Cenosphere coating is deposited on MDN 321 steel substrate using plasma spray coating. Thermo cyclic oxidation behavior of coating and substrate is studied in static air at 600 °C for 20 cycles. The thermo gravimetric technique is used to approximate the kinetics of oxidation. X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray mapping techniques are used to characterize the oxidized samples. NiCrAlY-WC-Co/Cenosphere coating exhibited lower oxidation rate in comparison to MDN 321 steel substrate. The lower oxidation rate of coating is attributed to formation of Al2O3, Cr2O3, NiO and CoWO4 oxides on the outermost surface.

New materials and devices for preventing catheter-related infections

PubMed Central

2011-01-01

Catheters are the leading source of bloodstream infections for patients in the intensive care unit (ICU). Comprehensive unit-based programs have proven to be effective in decreasing catheter-related bloodstream infections (CR-BSIs). ICU rates of CR-BSI higher than 2 per 1,000 catheter-days are no longer acceptable. The locally adapted list of preventive measures should include skin antisepsis with an alcoholic preparation, maximal barrier precautions, a strict catheter maintenance policy, and removal of unnecessary catheters. The development of new technologies capable of further decreasing the now low CR-BSI rate is a major challenge. Recently, new materials that decrease the risk of skin-to-vein bacterial migration, such as new antiseptic dressings, were extensively tested. Antimicrobial-coated catheters can prevent CR-BSI but have a theoretical risk of selecting resistant bacteria. An antimicrobial or antiseptic lock may prevent bacterial migration from the hub to the bloodstream. This review discusses the available knowledge about these new technologies. PMID:21906266

Motivation and participation in a phase III cardiac rehabilitation programme: an application of the health action process approach.

PubMed

Dohnke, Birte; Nowossadeck, Enno; Müller-Fahrnow, Werner

2010-10-01

This longitudinal study extends the previous research on low participation rates and high dropout rates in phase III cardiac rehabilitation (CR) exercise programmes. It examines the correlates of motivation and participation 6 months after inpatient phase II CR (T1) and the predictors of dropout 6 months later (T2) using the health action process approach (HAPA). Risk perception, outcome expectancies, self-efficacy, intention (at T1), and participation (at T1 and T2) in relation to phase III CR programmes was assessed in 456 patients. Based on intention and participation at T1, patients were classified as nonintenders (56%), intenders (13%), or actors (31%). Group differences were confirmed in outcome expectancies and self-efficacy. By T2, 21% of T1 actors had dropped out. Dropouts and maintainers differed in intention and self-efficacy (at T1). Results are in line with the HAPA and suggest a perspective for tailoring motivational counselling to improve participation in phase III CR programmes.

Mechanical properties of Cr-Cu coatings produced by electroplating

NASA Astrophysics Data System (ADS)

Riyadi, Tri Widodo Besar; Sarjito, Masyrukan, Riswan, Ricky Ary

2017-06-01

Hard chromium coatings has long been considered as the most used electrodeposited coating in several industrial applications such as in petrochemistry, oil and gas industries. When hard coatings used in fastener components, the sliding contact during fastening operation produces high tensile stresses on the surface which can generate microcracks. For component used in high oxidation and corrosion environment, deep cracks cannot be tolerated. In this work, a laminated structure of Cr-Cu coating was prepared using electroplating on carbon steel substrates. Two baths of chrome and copper electrolyte solutions were prepared to deposit Cr as the first layer and Cu as the second layer. The effect of current voltages on the thickness, hardness and specific wear rate of the Cu layer was investigated. The results show that an increase of the current voltages increased the thickness and hardness of the Cu layer, but reduced the specific wear rate. This study showed that the use of Cu can be a potential candidate as a laminated structure Cr-Cu for chromium plating.

The effects of welding parameters on ultra-violet light emissions, ozone and CrVI formation in MIG welding.

PubMed

Dennis, J H; Mortazavi, S B; French, M J; Hewitt, P J; Redding, C R

1997-01-01

This paper describes the relationships between ultra-violet emission, ozone generation and CrVI production in MIG welding which were measured as a function of shield gas flow rate, welding voltage, electrode stick-out and shield gas composition using an automatic welding rig that permitted MIG welding under reproducible conditions. The experimental results are interpreted in terms of the physico-chemical processes occurring in the micro- and macro-environments of the arc as part of research into process modification to reduce occupational exposure to ozone and CrVI production rates in MIG welding. We believe the techniques described here, and in particular the use of what we have termed u.v.-ozone measurements, will prove useful in further study of ozone generation and CrVI formation and may be applied in the investigation of engineering control of occupational exposure in MIG and other welding process such as Manual Metal Arc (MMA) and Tungsten Inert Gas (TIG).

FY2017 Defense Spending Under an Interim Continuing Resolution (CR): In Brief

DTIC Science & Technology

2016-09-16

rated based on the fraction of a year for which the interim CR is in effect . In recent fiscal years, the referenced funding level on which interim or...of the Federal Government: Causes, Processes, and Effects , coordinated by Clinton T. Brass. 8 Typically, such funding is specified as an annualized...congressional consideration of a CR to fund the federal government through the opening months of the fiscal year is widely anticipated. This report

Uptake of a technology-assisted home-care cardiac rehabilitation program.

PubMed

Varnfield, Marlien; Karunanithi, Mohanraj K; Särelä, Antti; Garcia, Elsa; Fairfull, Anita; Oldenburg, Brian F; Walters, Darren L

2011-02-21

The prevalence of cardiovascular disease, a major cause of disease burden in Australia and other developed countries, is increasing due to a rapidly ageing population and environmental, biomedical and modifiable lifestyle factors. Although cardiac rehabilitation (CR) programs have been shown to be beneficial and effective, rates of referral, uptake and utilisation of traditional hospital or community centre programs are poor. Home-based CR programs have been shown to be as effective as centre-based programs, and recent advances in information and communication technologies (ICT) can be used to enhance the delivery of such programs. The Care Assessment Platform (CAP) is an integrated home-based CR model incorporating ICT (including a mobile phone and the internet) and providing all the core components of traditional CR (education, physical activity, exercise training, behaviour modification strategies and psychological counselling). The mobile phone given to patients has an integrated accelerometer and diary application for recording exercise and health information. A central database, with access to these data, allows mentors to assess patients' progress, assist in setting goals, revise targets and give weekly personal feedback. Mentors find the mobile-phone modalities practical and easy to use, and preliminary results show high usage rates and acceptance of ICT by participants. The provision of ICT-supported home-based CR programs may enable more patients in both metropolitan and remote settings to benefit from CR.

Blinatumomab vs historical standard therapy of adult relapsed/refractory acute lymphoblastic leukemia

PubMed Central

Gökbuget, N; Kelsh, M; Chia, V; Advani, A; Bassan, R; Dombret, H; Doubek, M; Fielding, A K; Giebel, S; Haddad, V; Hoelzer, D; Holland, C; Ifrah, N; Katz, A; Maniar, T; Martinelli, G; Morgades, M; O'Brien, S; Ribera, J-M; Rowe, J M; Stein, A; Topp, M; Wadleigh, M; Kantarjian, H

2016-01-01

We compared outcomes from a single-arm study of blinatumomab in adult patients with B-precursor Ph-negative relapsed/refractory acute lymphoblastic leukemia (R/R ALL) with a historical data set from Europe and the United States. Estimates of complete remission (CR) and overall survival (OS) were weighted by the frequency distribution of prognostic factors in the blinatumomab trial. Outcomes were also compared between the trial and historical data using propensity score methods. The historical cohort included 694 patients with CR data and 1112 patients with OS data compared with 189 patients with CR and survival data in the blinatumomab trial. The weighted analysis revealed a CR rate of 24% (95% CI: 20–27%) and a median OS of 3.3 months (95% CI: 2.8–3.6) in the historical cohort compared with a CR/CRh rate of 43% (95% CI: 36–50%) and a median OS of 6.1 months (95% CI: 4.2–7.5) in the blinatumomab trial. Propensity score analysis estimated increased odds of CR/CRh (OR=2.68, 95% CI: 1.67–4.31) and improved OS (HR=0.536, 95% CI: 0.394–0.730) with blinatumomab. The analysis demonstrates the application of different study designs and statistical methods to compare novel therapies for R/R ALL with historical data. PMID:27662202

Methotrexate for the Treatment of Pediatric Crohn's Disease: A Systematic Review and Meta-analysis.

PubMed

Colman, Ruben J; Lawton, Rachel C; Dubinsky, Marla C; Rubin, David T

2018-04-23

Methotrexate (MTX) is an immunomodulator used for the treatment of pediatric inflammatory bowel disease (IBD). There are currently no RCTs that assess the treatment efficacy of methotrexate within the pediatric IBD patient population. This systematic review and meta-analysis assesses the efficacy of MTX therapy among the existing pediatric literature. A systematic literature search was performed using MEDLINE and the Cochrane library from inception until March 2016. Synonyms for 'pediatric', 'methotrexate' and 'IBD' were utilized as both free text and MESH search terms. The studies included contained clinical remission (CR) rates for MTX treatment of pediatric IBD patients 18 yrs old, as mono- or combination therapy. Case studies with <10 patients were excluded. Quality assessment was performed with the Newcastle-Ottawa Scale. Meta-analysis calculated pooled CR rates. A random-effects meta-analysis with forest plots was performed using R. Fourteen (11 monotherapy, 1 combination therapy, 2 both; n = 886 patients) observational studies were eligible out of 202 studies. No interventional studies were identified. The pooled achieved CR rate for pediatric CD patients on monotherapy within 3-6 months was 57.7% (95% CI 48.2-66.6%), (P =0.22; I2 = 29.8%). The CR was 37.1% (95% CI 29.5-45.5%), (P = 0.20; I2 = 37.4%) for maintenance therapy at 12 months. Sub-analysis could not identify CR differences between MTX administration types, thiopurine exposure. This meta-analysis demonstrated that, over 50% of pediatric Crohn's disease patients induced with methotrexate achieved clinical remission, while 12-month remission rate was only 37%. Prospective controlled interventional trials should assess treatment efficacy among patient subgroups. 10.1093/ibd/izy078_video1izy078.video15774883936001.

Preoperative Radiotherapy of Advanced Rectal Cancer With Capecitabine and Oxaliplatin With or Without Cetuximab: A Pooled Analysis of Three Prospective Phase I-II Trials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiss, Christian, E-mail: christian.weiss@kgu.d; Arnold, Dirk; Dellas, Kathrin

2010-10-01

Purpose: A pooled analysis of three prospective trials of preoperative radiochemotherapy (RCT) for rectal cancer by using oxaliplatin and capecitabine with or without cetuximab was performed to evaluate the impact of additional cetuximab on pathologic complete response (pCR) rates and tumor regression (TRG) grades. Methods and Materials: Of 202 patients, 172 patients met the inclusion criteria (primary tumor stage II/III, M0). All patients received concurrent RCT, and 46 patients received additional cetuximab therapy. A correlation of pretreatment clinicopathologic factors and cetuximab treatment with early pCR rates (TRG > 50%) was performed with univariate and multivariate analyses. Toxicity data were recordedmore » for all patients. Results: Of 172 patients, 24 (14%) patients achieved a pCR, and 84 of 172 (71%) patients showed a TRG of >50% in the surgical specimen assessment after preoperative treatment. Age, gender, and T/N stages, as well as localization of the tumor, were not associated with pCR or good TRG. The pCR rate was 16% after preoperative RCT alone and 9% with concurrent cetuximab therapy (p = 0.32). A significantly reduced TRG of >50% was found after RCT with cetuximab compared to RCT alone (p = 0.0035). This was validated by a multivariate analysis with all available clinical factors (p = 0.0037). Acute toxicity and surgical complications were not increased with additional cetuximab. Conclusions: Triple therapy with RCT and cetuximab seems to be feasible, with no unexpected toxicity. Early response assessment (TRG), however, suggests subadditive interaction. A longer follow-up (and finally randomized trials) is needed to draw any firm conclusions with respect to local and distant failure rates.« less

Prospective validation of immunological infiltrate for prediction of response to neoadjuvant chemotherapy in HER2-negative breast cancer--a substudy of the neoadjuvant GeparQuinto trial.

PubMed

Issa-Nummer, Yasmin; Darb-Esfahani, Silvia; Loibl, Sibylle; Kunz, Georg; Nekljudova, Valentina; Schrader, Iris; Sinn, Bruno Valentin; Ulmer, Hans-Ullrich; Kronenwett, Ralf; Just, Marianne; Kühn, Thorsten; Diebold, Kurt; Untch, Michael; Holms, Frank; Blohmer, Jens-Uwe; Habeck, Jörg-Olaf; Dietel, Manfred; Overkamp, Friedrich; Krabisch, Petra; von Minckwitz, Gunter; Denkert, Carsten

2013-01-01

We have recently described an increased lymphocytic infiltration rate in breast carcinoma tissue is a significant response predictor for anthracycline/taxane-based neoadjuvant chemotherapy (NACT). The aim of this study was to prospectively validate the tumor-associated lymphocyte infiltrate as predictive marker for response to anthracycline/taxane-based NACT. The immunological infiltrate was prospectively evaluated in a total of 313 core biopsies from HER2 negative patients of the multicenter PREDICT study, a substudy of the neoadjuvant GeparQuinto study. Intratumoral lymphocytes (iTuLy), stromal lymphocytes (strLy) as well as lymphocyte-predominant breast cancer (LPBC) were evaluated by histopathological assessment. Pathological complete response (pCR) rates were analyzed and compared between the defined subgroups using the exact test of Fisher. Patients with lymphocyte-predominant breast cancer (LPBC) had a significantly increased pCR rate of 36.6%, compared to non-LPBC patients (14.3%, p<0.001). LPBC and stromal lymphocytes were significantly independent predictors for pCR in multivariate analysis (LPBC: OR 2.7, p = 0.003, strLy: OR 1.2, p = 0.01). The amount of intratumoral lymphocytes was significantly predictive for pCR in univariate (OR 1.2, p = 0.01) but not in multivariate logistic regression analysis (OR 1.2, p = 0.11). Confirming previous investigations of our group, we have prospectively validated in an independent cohort that an increased immunological infiltrate in breast tumor tissue is predictive for response to anthracycline/taxane-based NACT. Patients with LPBC and increased stromal lymphocyte infiltration have significantly increased pCR rates. The lymphocytic infiltrate is a promising additional parameter for histopathological evaluation of breast cancer core biopsies.

Tobacco control and the reduction in smoking-related premature deaths in the United States, 1964-2012.

PubMed

Holford, Theodore R; Meza, Rafael; Warner, Kenneth E; Meernik, Clare; Jeon, Jihyoun; Moolgavkar, Suresh H; Levy, David T

2014-01-08

January 2014 marks the 50th anniversary of the first surgeon general's report on smoking and health. This seminal document inspired efforts by governments, nongovernmental organizations, and the private sector to reduce the toll of cigarette smoking through reduced initiation and increased cessation. To model reductions in smoking-related mortality associated with implementation of tobacco control since 1964. Smoking histories for individual birth cohorts that actually occurred and under likely scenarios had tobacco control never emerged were estimated. National mortality rates and mortality rate ratio estimates from analytical studies of the effect of smoking on mortality yielded death rates by smoking status. Actual smoking-related mortality from 1964 through 2012 was compared with estimated mortality under no tobacco control that included a likely scenario (primary counterfactual) and upper and lower bounds that would capture plausible alternatives. National Health Interview Surveys yielded cigarette smoking histories for the US adult population in 1964-2012. Number of premature deaths avoided and years of life saved were primary outcomes. Change in life expectancy at age 40 years associated with change in cigarette smoking exposure constituted another measure of overall health outcomes. In 1964-2012, an estimated 17.7 million deaths were related to smoking, an estimated 8.0 million (credible range [CR], 7.4-8.3 million, for the lower and upper tobacco control counterfactuals, respectively) fewer premature smoking-related deaths than what would have occurred under the alternatives and thus associated with tobacco control (5.3 million [CR, 4.8-5.5 million] men and 2.7 million [CR, 2.5-2.7 million] women). This resulted in an estimated 157 million years (CR, 139-165 million) of life saved, a mean of 19.6 years for each beneficiary (111 million [CR, 97-117 million] for men, 46 million [CR, 42-48 million] for women). During this time, estimated life expectancy at age 40 years increased 7.8 years for men and 5.4 years for women, of which tobacco control is associated with 2.3 years (CR, 1.8-2.5) (30% [CR, 23%-32%]) of the increase for men and 1.6 years (CR, 1.4-1.7) (29% [CR, 25%-32%]) for women. Tobacco control was estimated to be associated with avoidance of 8 million premature deaths and an estimated extended mean life span of 19 to 20 years. Although tobacco control represents an important public health achievement, efforts must continue to reduce the effect of smoking on the nation's death toll.

Establishment of Wear Resistant HVOF Coatings for 50CrMo4 Chromium Molybdenum Alloy Steel as an Alternative for Hard Chrome Plating

NASA Astrophysics Data System (ADS)

Karuppasamy, S.; Sivan, V.; Natarajan, S.; Kumaresh Babu, S. P.; Duraiselvam, M.; Dhanuskodi, R.

2018-05-01

High cost imported components of seamless steel tube manufacturing plants wear frequently and need replacement to ensure the quality of the product. Hard chrome plating, which is time consuming and hazardous, is conventionally used to restore the original dimension of the worn-out surface of the machine components. High Velocity Oxy-Fuel (HVOF) thermal spray coatings with NiCrBSi super alloy powder and Cr3C2 NiCr75/25 alloy powder applied on a 50CrMo4 (DIN-1.7228) chromium molybdenum alloy steel, the material of the wear prone machine component, were evaluated for use as an alternative for hard chrome plating in this present work. The coating characteristics are evaluated using abrasive wear test, sliding wear test and microscopic analysis, hardness test, etc. The study results revealed that the HVOF based NiCrBSi and Cr3C2NiCr75/25 coatings have hardness in the range of 800-900 HV0.3, sliding wear rate in the range of 50-60 µm and surface finish around 5 microns. Cr3C2 NiCr75/25 coating is observed to be a better option out of the two coatings evaluated for the selected application.

Creatine in the central nervous system: From magnetic resonance spectroscopy to creatine deficiencies.

PubMed

Rackayova, Veronika; Cudalbu, Cristina; Pouwels, Petra J W; Braissant, Olivier

2017-07-15

Creatine (Cr) is an important organic compound acting as intracellular high-energy phosphate shuttle and in energy storage. While located in most cells where it plays its main roles in energy metabolism and cytoprotection, Cr is highly concentrated in muscle and brain tissues, in which Cr also appears to act in osmoregulation and neurotransmission. This review discusses the basis of Cr metabolism, synthesis and transport within brain cells. The importance of Cr in brain function and the consequences of its impaired metabolism in primary and secondary Cr deficiencies are also discussed. Cr and phosphocreatine (PCr) in living systems can be well characterized using in vivo magnetic resonance spectroscopy (MRS). This review describes how 1 H MRS allows the measurement of Cr and PCr, and how 31 P MRS makes it possible to estimate the creatine kinase (CK) rate constant and so detect dynamic changes in the Cr/PCr/CK system. Absolute quantification by MRS using creatine as internal reference is also debated. The use of in vivo MRS to study brain Cr in a non-invasive way is presented, as well as its use in clinical and preclinical studies, including diagnosis and treatment follow-up in patients. Copyright © 2016 Elsevier Inc. All rights reserved.

Oxidation behavior and electrical property of ferritic stainless steel interconnects with a Cr-La alloying layer by high-energy micro-arc alloying process

NASA Astrophysics Data System (ADS)

Feng, Z. J.; Zeng, C. L.

Chromium volatility, poisoning of the cathode material and rapidly decreasing electrical conductivity are the major problems associated with the application of ferritic stainless steel interconnects of solid oxide fuel cells operated at intermediate temperatures. Recently, a novel and simple high-energy micro-arc alloying (HEMAA) process is proposed to prepare LaCrO 3-based coatings for the type 430 stainless steel interconnects using a LaCrO 3-Ni rod as deposition electrode. In this work, a Cr-La alloying layer is firstly obtained on the alloy surface by HEMAA using Cr and La as deposition electrode, respectively, followed by oxidation treatment at 850 °C in air to form a thermally grown LaCrO 3 coating. With the formation of a protective scale composed of a thick LaCrO 3 outer layer incorporated with small amounts of Cr-rich oxides and a thin Cr 2O 3-rich sub-layer, the oxidation rate of the coated steel is reduced remarkably. A low and stable electrical contact resistance is achieved with the application of LaCrO 3-based coatings, with a value less than 40 mΩ cm 2 during exposure at 850 °C in air for up to 500 h.

Investigation of equilibrium and kinetics of Cr(VI) adsorption by dried Bacillus cereus using response surface methodology.

PubMed

Yang, Kai; Zhang, Jing; Yang, Tao; Wang, Hongyu

2016-01-01

In this study, response surface methodology (RSM) based on three-variable-five-level central composite rotatable design was used to analyze the effects of combined and individual operating parameters (biomass dose, initial concentration of Cr(VI) and pH) on the Cr(VI) adsorption capacity of dried Bacillus cereus. A quadratic polynomial equation was obtained to predict the adsorbed Cr(VI) amount. Analysis of variance showed that the effect of biomass dose was the key factor in the removal of Cr(VI). The maximum adsorbed Cr(VI) amount (30.93 mg g(-1)) was found at 165.30 mg L(-1), 2.96, and 3.01 g L(-1) for initial Cr(VI) concentration, pH, and biosorbent dosage, respectively. The surface chemical functional groups and microstructure of unloaded and Cr(VI)-loaded dried Bacillus cereus were identified by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), respectively. Besides, the results gained from these studies indicated that Langmuir isotherm and the second-order rate expression were suitable for the removal of Cr(VI) from wastewater. The results revealed RSM was an effective method for optimizing biosorption process, and dried Bacillus cereus had a remarkable performance on the removal of Cr(VI) from wastewater.

Differential effect of biochar upon reduction-induced mobility and bioavailability of arsenate and chromate.

PubMed

Choppala, Girish; Bolan, Nanthi; Kunhikrishnan, Anitha; Bush, Richard

2016-02-01

Heavy metals such as chromium (Cr) and arsenic (As) occur in ionic form in soil, with chromate [Cr(VI)] and arsenate As(V) being the most pre-dominant forms. The application of biochar to Cr(VI) and As(V) spiked and field contaminated soils was evaluated on the reduction processes [(Cr(VI) to Cr(III)] and [As(V) to As(III))], and subsequent mobility and bioavailability of both As(V) and Cr(VI). The assays used in this study included leaching, soil microbial activity and XPS techniques. The reduction rate of As(V) was lower than that of Cr(VI) with and without biochar addition, however, supplementation with biochar enhanced the reduction process of As(V). Leaching experiments indicated Cr(VI) was more mobile than As(V). Addition of biochar reversed the effect by reducing the mobility of Cr and increasing that of As. The presence of Cr and As in both spiked and contaminated soils reduced microbial activity, but with the addition of biochar to these soils, the microbial activity increased in the Cr(VI) contaminated soils, while it was further decreased with As(V) contaminated soils. The addition of biochar was effective in mitigating Cr toxicity by reducing Cr(VI) to Cr(III). In contrast, the conversion process of As(V) to As(III) hastened by biochar was not favourable, as As(III) is more toxic in soils. Overall, the presence of functional groups on biochar promotes reduction by providing the electrons required for reduction processes to occur as determined by XPS data. Copyright © 2015 Elsevier Ltd. All rights reserved.

Selective and sensitive speciation analysis of Cr(VI) and Cr(III), at sub-μgL-1 levels in water samples by electrothermal atomic absorption spectrometry after electromembrane extraction.

PubMed

Tahmasebi, Zeinab; Davarani, Saied Saeed Hosseiny

2016-12-01

In this work, electromembrane extraction in combination with electrothermal atomic absorption spectrometry (ET-AAS) was investigated for speciation, preconcentration and quantification of Cr(VI) and Cr(III) in water samples through the selective complexation of Cr(VI) with 1,5-diphenylcarbazide (DPC) as a complexing agent. DPC reduces Cr(VI) to Cr(III) ions and then Cr(III) species are extracted based on electrokinetic migration of their cationic complex (Cr(III)-DPC) toward the negative electrode placed in the hollow fiber. Also, once oxidized to Cr(VI), Cr(III) ions in initial sample were determined by this procedure. The influence of extraction parameters such as pH, type of organic solvent, chelating agent concentration, stirring rate, extraction time and applied voltage were evaluated following a one-at-a-time optimization approach. Under optimized conditions, the extracted analyte was quantified by ETAAS, with an acceptable linearity in the range of 0.05-5ngmL -1 (R 2 value=0.996), and a repeatability (%RSD) between 3.7% and 12.2% (n=4) for 5.0 and 1.0ngmL -1 of Cr(VI), respectively. Also, we obtained an enrichment factor of 110 that corresponded to the recovery of 66%. The detection limit (S/N ratio of 3:1) was 0.02ngmL -1 . Finally, this new method was successfully employed to determine Cr(III) and Cr(VI) species in real water samples. Copyright © 2016. Published by Elsevier B.V.

Study of Adsorption Mechanism of Congo Red on Graphene Oxide/PAMAM Nanocomposite

PubMed Central

Rafi, Mohammad; Samiey, Babak; Cheng, Chil-Hung

2018-01-01

Graphene oxide/poly(amidoamine) (GO/PAMAM) nanocomposite adsorbed high quantities of congo red (CR) anionic dye in 0.1 M NaCl solution, with the maximum adsorption capacity of 198 mg·g−1. The kinetics and thermodynamics of adsorption were investigated to elucidate the effects of pH, temperature, shaking rate, ionic strength, and contact time. Kinetic data were analyzed by the KASRA model and the KASRA, ISO, and pore-diffusion equations. Adsorption adsorption isotherms were studied by the ARIAN model and the Henry, Langmuir, and Temkin equations. It was shown that adsorption sites of GO/PAMAM at experimental conditions were phenolic hydroxyl groups of GO sheets and terminal amine groups of PAMAM dendrimer. Analysis of kinetic data indicated that amine sites were located on the surface, and that hydroxyl sites were placed in the pores of adsorbent. CR molecules interacted with the adsorption sites via hydrogen bonds. The molecules were adsorbed firstly on the amine sites, and then on the internal hydroxyl sites. Adsorption kinetic parameters indicated that the interaction of CR to the –NH3+ sites was the rate-controlling step of adsorption of CR on this site and adsorption activation energies calculated for different parts of this step. On the other hand, kinetic parameters showed that the intraparticle diffusion was the rate-controlling step during the interaction of CR molecules to –OH sites and activation energy of this step was not calculable. Finally, the used GO/PAMAM was completely regenerated by using ethylenediamine. PMID:29587463

Partial oxidation of landfill leachate in supercritical water: Optimization by response surface methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gong, Yanmeng; Wang, Shuzhong; Xu, Haidong

Highlights: • Partial oxidation of landfill leachate in supercritical water was investigated. • The process was optimized by Box–Behnken design and response surface methodology. • GY{sub H2}, TRE and CR could exhibit up to 14.32 mmol·gTOC{sup −1}, 82.54% and 94.56%. • Small amounts of oxidant can decrease the generation of tar and char. - Abstract: To achieve the maximum H{sub 2} yield (GY{sub H2}), TOC removal rate (TRE) and carbon recovery rate (CR), response surface methodology was applied to optimize the process parameters for supercritical water partial oxidation (SWPO) of landfill leachate in a batch reactor. Quadratic polynomial models formore » GY{sub H2}, CR and TRE were established with Box–Behnken design. GY{sub H2}, CR and TRE reached up to 14.32 mmol·gTOC{sup −1}, 82.54% and 94.56% under optimum conditions, respectively. TRE was invariably above 91.87%. In contrast, TC removal rate (TR) only changed from 8.76% to 32.98%. Furthermore, carbonate and bicarbonate were the most abundant carbonaceous substances in product, whereas CO{sub 2} and H{sub 2} were the most abundant gaseous products. As a product of nitrogen-containing organics, NH{sub 3} has an important effect on gas composition. The carbon balance cannot be reached duo to the formation of tar and char. CR increased with the increase of temperature and oxidation coefficient.« less

Long term curative effects of sequential therapy with all-trans retinoic acid, arsenious oxide and chemotherapy on patients with acute promyelocytic leukemia.

PubMed

Pei, Renzhi; Cao, Junjie; Ma, Junxia; Zhang, Pisheng; Liu, Xuhui; Du, Xiaohong; Chen, Dong; Sha, Keya; Chen, Lieguang; Li, Shuangyue; Wu, Jingyi; Fan, Zhen; Lin, Li; Ye, Peipei; Tang, Shanhao; Zhang, Bibo

2012-11-01

Both all-trans retinoic acid (ATRA) and arsenic trioxide (As(2)O(3)) have proven to be very effective in obtaining high clinical complete remission (CR) rates in acute promyelocytic leukemia (APL). In this study, 73 newly diagnosed APL subjects were treated with an ATRA and As(2)O(3) combination treatment in remission induction and post remission therapy. Tumor burden was examined with PCR of the PML-RAR fusion transcripts, and side effects were evaluated by means of clinical examination. The results showed that ATRA/As(2)O(3) combination therapy yielded a CR rate of 94.5% (69/73) with a shorter time to enter CR (median: 27 days; range: 21-43 days). Four cases failed to enter CR; three of these died of cerebral hemorrhage and disseminated intravascular coagulation (DIC) within 72 hours of starting induction therapy, one older patient died of severe pulmonary infection. The early death rate was 5.5% (4/73). All 69 cases that obtained CR remained in good clinical remission after a follow-up of 35-74 months (median: 52 months).The drug toxicity profile with the use of As(2)O(3) showed mainly hepatotoxicity. Liver dysfunction was slight in most cases. There were no severe side effects in long term follow-up. We conclude that APL patients may benefit from the use of the combination of ATRA and As(2)O(3) in either remission induction or consolidation/maintenance.

Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys

NASA Astrophysics Data System (ADS)

Bae, Jae Wung; Moon, Jongun; Jang, Min Ji; Ahn, Dong-Hyun; Joo, Soo-Hyun; Jung, Jaimyun; Yim, Dami; Kim, Hyoung Seop

2017-09-01

Herein, the deep drawability and deep drawing behavior of an equiatomic CoCrFeMnNi HEA and its microstructure and texture evolution are first studied for future applications. The CoCrFeMnNi HEA is successfully drawn to a limit drawing ratio (LDR) of 2.14, while the planar anisotropy of the drawn cup specimen is negligible. The moderate combination of strain hardening exponent and strain rate sensitivity and the formation of deformation twins in the edge region play important roles in successful deep drawing. In the meanwhile, the texture evolution of CoCrFeMnNi HEA has similarities with conventional fcc metals.

Adsorption and desorption of hexavalent chromium in an alluvial aquifer near Telluride, Colorado

USGS Publications Warehouse

Stollenwerk, K.G.; Grove, D.B.

1985-01-01

A laboratory investigation of reactions between hexavalent chromium [Cr(VI)] and alluvium was conducted to evaluate reactions of Cr(VI) contaminating an alluvial aquifer near Telluride, CO and to determine the mechanisms responsible for these reactions. Uncontaminated alluvium and groundwater (spiked with CrO42-) from the study site were used in batch and column experiments. Results of these experiments show that Cr(VI) was adsorbed by the alluvium. Distribution coefficients from batch experiments ranged from 52 L/kg at an equilibrium CrO42- concentration of 0.4 ??mol/L to 1.7 L/kg at an equilibrium concentration of 1400 ??mol/L. The zero point of charge for the alluvium was approximately 8.3, and the alluvium had a positive net charge at the groundwater pH of 6.8. Visual and chemical evidence indicated that Fe oxide and hydroxide coatings on the alluvial particles principally were responsible for the absorption of Cr(VI). During column experiments, Cr(VI) initially was desorbed easily from the alluvium by Cr-free groundwater; however, the rate of desorption decreased rapidly, and > 60 pore volumes of groundwater were required to decrease the effluent concentration of Cr(VI) to 3 ??mol/L [drinking water standard for Cr(VI) = 1 ??mol/L]. The quantity of Cr(VI) adsorbed varied with the type and concentration of other anions in solution.

Improvement of Corrosion Resistance of Binary Mg-Ca Alloys Using Duplex Aluminum-Chromium Coatings

NASA Astrophysics Data System (ADS)

Daroonparvar, Mohammadreza; Yajid, Muhamad Azizi Mat; Yusof, Noordin Mohd; Bakhsheshi-Rad, Hamid Reza; Adabi, Mohsen; Hamzah, Esah; Kamali, Hussein Ali

2015-07-01

Al-AlCr was coated on Mg-Ca and Mg-Zn-Ce-La alloys using physical vapor deposition method. The surface morphology of the specimens was characterized by x-ray diffraction, scanning electron microscopy equipped with energy-dispersive x-ray spectroscopy, and atomic force microscopy (AFM). The AFM results indicated that the average surface roughness of Al-AlCr coating on the Mg-Ca alloy is much lower than that of Al-AlCr coating on the Mg-Zn-Ce-La alloy. However, Al-AlCr coating on the Mg-Ca alloy presented a more compact structure with fewer pores, pinholes, and cracks than Al-AlCr coating on the Mg-Zn-Ce-La alloy. Electrochemical studies revealed that the novel coating (Al-AlCr) can remarkably reduce the corrosion rate of the Mg-Ca alloy in 3.5 wt.% NaCl solution. It was seen that the anodic current density of the Al-AlCr-coated Mg-Ca alloy was very small when compared to the Al-AlCr-coated Mg-Zn-Ce-La and uncoated alloys. Impedance modulus ( Z) of the Al-AlCr-coated samples was higher than that of the bare Mg alloys. Z of Al-AlCr-coated Mg-Ca alloy was higher than that of the Al-AlCr-coated Mg-Zn-Ce-La alloy at low frequency.

Determination of hexavalent chromium concentration in industrial waste incinerator stack gas by using a modified ion chromatography with post-column derivatization method.

PubMed

Miyake, Yuichi; Tokumura, Masahiro; Iwazaki, Yuta; Wang, Qi; Amagai, Takashi; Horii, Yuichi; Otsuka, Hideyuki; Tanikawa, Noboru; Kobayashi, Takeshi; Oguchi, Masahiro

2017-06-16

An ion chromatography with post-column derivatization with 1,5-diphenylcarbazide (IC-DPC) analytical method was modified to enable measurement of trace-level hexavalent chromium (Cr(VI)) in air. One of the difficulties in determining trace levels of Cr(VI) in air with conventional IC-DPC methods is co-elution of the solvent and ion peaks due to high concentrations of ionic compounds in the extract. However, by using gradient elution rather than isocratic elution we were able to fully resolve the Cr(VI) ion peak from the solvent peak without the need for diluting the extract, which would have reduced the minimum quantifiable level of the method. With this method, we were able to detect Cr(VI) in air at concentrations of 5.3ng/m 3 (assuming a sampling volume of 1m 3 and a final solution volume of 10mL). Recovery tests at three different concentrations of Cr(VI) (50, 250, 1000ng) were performed with or without fly ash; recovery rates at all the concentrations of Cr(VI), with or without fly ash, ranged from 68% to 110% (mean±relative standard deviation, 96%±11%), and there were no differences in recovery rates with respect to the presence or absence of fly ash. Finally, we used the developed method to determine the concentration of Cr(VI) in stack gases collected from eight industrial waste incinerators located in Japan. The concentration of Cr(VI) in the stack gases ranged from below the method quantification limit to 3100ng/m 3 . The highest concentrations of Cr(VI) detected in the stack gases were two to three orders of magnitude higher than that in ambient air in Japan. Copyright © 2017 Elsevier B.V. All rights reserved.

Delays in Referral and Enrolment Are Associated With Mitigated Benefits of Cardiac Rehabilitation After Coronary Artery Bypass Surgery.

PubMed

Marzolini, Susan; Blanchard, Chris; Alter, David A; Grace, Sherry L; Oh, Paul I

2015-11-01

Cardiac rehabilitation (CR) is recommended after coronary artery bypass graft surgery; however, the consequences of longer wait times to start CR have not been elucidated. Cardiopulmonary, demographic, and anthropometric assessments were conducted before and after 6 months of CR in consecutively enrolled patients from January 1995 to October 2012. Wait times were ascertained from referral forms and charts. Neighborhood characteristics were ascertained using census data and cross-referencing with patients' home geographic location. Among 6497 post- coronary artery bypass graft participants, mean and median total wait time (time from surgery to first exercise session) was 101.1±47.9 and 80 days, respectively. In multiple linear regression, correlates of longer total wait time and the 2 wait-time phases, time from surgery to CR referral and time from CR referral to first exercise session, were determined. Factors influencing longer wait times included female sex, greater age, being employed, less social support, longer drive time to CR, lower neighborhood socioeconomic status, higher systolic blood pressure, abdominal obesity, and a complex medical history. After adjusting for correlates of delayed entry, longer wait time for each of the total and 2 wait-time phases was significantly associated with less improvement in cardiopulmonary fitness (VO2peak; β=-0.165, P<0.001), body fat percentage (β=0.032, P<0.02), resting heart rate (β=0.066, P<0.001), and poorer attendance to CR classes (β=-0.081, P<0.001) and completion rate (β=2.741, P<0.001). Strategies for timely access to CR at each phase of the process are important given the negative impact that wait time has on key clinical outcomes. This is relevant because optimizing VO2peak and attendance to CR has been shown to confer a mortality advantage. © 2015 American Heart Association, Inc.

Controlled release nifedipine and valsartan combination therapy in patients with essential hypertension: the adalat CR and valsartan cost-effectiveness combination (ADVANCE-combi) study.

PubMed

Saito, Ikuo; Saruta, Takao

2006-10-01

This study was designed to compare the clinical efficacy of two calcium channel blocker-based combination therapies with an angiotensin receptor blocker in Japanese patients with essential hypertension. A 16-week, double-blind, parallel-arm, randomized clinical trial was performed to compare the efficacy and safety of the combination therapy of controlled release nifedipine (nifedipine CR) plus valsartan vs. that of amlodipine plus valsartan. The primary endpoint was the target blood pressure achievement rate. Eligible patients were randomly allocated to nifedipine CR-based or amlodipine-based treatment groups. Patients were examined every 4 weeks to determine whether the blood pressure had reached the target level. When the target level was not achieved, the drug regimen was changed; when the target blood pressure was achieved, the same study medication was continued. A total of 505 patients were enrolled in the study (nifedipine CR group: 245 cases; amlodipine group: 260 cases). After 16 weeks of treatment, blood pressure was significantly reduced in both groups, but to a larger extent in the nifedipine CR group than in the amlodipine group (p < 0.01). The target blood pressure achievement rate was also significantly higher in the nifedipine CR group (p < 0.001). There was no significant difference in the incidence of drug-related adverse events between the groups. These results indicate that the nifedipine CR-based combination therapy was superior to the amlodipine-based therapy for decreasing blood pressure and achieving the target blood pressure in patients with essential hypertension.

Influence of carbides and microstructure of CoCrMo alloys on their metallic dissolution resistance.

PubMed

Valero-Vidal, C; Casabán-Julián, L; Herraiz-Cardona, I; Igual-Muñoz, A

2013-12-01

CoCrMo alloys are passive and biocompatible materials widely used as joint replacements due to their good mechanical properties and corrosion resistance. Electrochemical behaviour of thermal treated CoCrMo alloys with different carbon content in their bulk alloy composition has been analysed. Both the amount of carbides in the CoCrMo alloys and the chemical composition of the simulated body fluid affect the electrochemical properties of these biomedical alloys, thus passive dissolution rate was influenced by the mentioned parameters. Lower percentage of carbon in the chemical composition of the bulk alloy and thermal treatments favour the homogenization of the surface (less amount of carbides), thus increasing the availability of Cr to form the oxide film and improving the corrosion resistance of the alloy. © 2013.

Ceramic Defects in Metal-Ceramic Fixed Dental Prostheses Made from Co-Cr and Au-Pt Alloys: A Retrospective Study.

PubMed

Mikeli, Aikaterini; Boening, Klaus W; Lißke, Benjamin

2015-01-01

Ceramic defects in porcelain-fused-to-metal (PFM) restorations may depend on framework alloy type. This study assessed ceramic defects on cobalt-chromium- (Co-Cr-) and gold-platinum- (Au-Pt-) based PFM restorations. In this study, 147 Co-Cr-based and 168 Au-Pt-based PFM restorations inserted between 1998 and 2010 (139 patients) were examined for ceramic defects. Detected defects were assigned to three groups according to clinical defect relevance. Ceramic defect rates (Co-Cr-based: 12.9%; Au-Pt-based: 7.2%) revealed no significant difference but a strong statistical trend (U test, P = .082). Most defects were of little clinical relevance. Co-Cr PFM restorations may be at higher risk for ceramic defects compared to Au-Pt-based restorations.

Treatment of Alkaline Cr(VI)-Contaminated Leachate with an Alkaliphilic Metal-Reducing Bacterium.

PubMed

Watts, Mathew P; Khijniak, Tatiana V; Boothman, Christopher; Lloyd, Jonathan R

2015-08-15

Chromium in its toxic Cr(VI) valence state is a common contaminant particularly associated with alkaline environments. A well-publicized case of this occurred in Glasgow, United Kingdom, where poorly controlled disposal of a cementitious industrial by-product, chromite ore processing residue (COPR), has resulted in extensive contamination by Cr(VI)-contaminated alkaline leachates. In the search for viable bioremediation treatments for Cr(VI), a variety of bacteria that are capable of reduction of the toxic and highly soluble Cr(VI) to the relatively nontoxic and less mobile Cr(III) oxidation state, predominantly under circumneutral pH conditions, have been isolated. Recently, however, alkaliphilic bacteria that have the potential to reduce Cr(VI) under alkaline conditions have been identified. This study focuses on the application of a metal-reducing bacterium to the remediation of alkaline Cr(VI)-contaminated leachates from COPR. This bacterium, belonging to the Halomonas genus, was found to exhibit growth concomitant to Cr(VI) reduction under alkaline conditions (pH 10). Bacterial cells were able to rapidly remove high concentrations of aqueous Cr(VI) (2.5 mM) under anaerobic conditions, up to a starting pH of 11. Cr(VI) reduction rates were controlled by pH, with slower removal observed at pH 11, compared to pH 10, while no removal was observed at pH 12. The reduction of aqueous Cr(VI) resulted in the precipitation of Cr(III) biominerals, which were characterized using transmission electron microscopy and energy-dispersive X-ray analysis (TEM-EDX) and X-ray photoelectron spectroscopy (XPS). The effectiveness of this haloalkaliphilic bacterium for Cr(VI) reduction at high pH suggests potential for its use as an in situ treatment of COPR and other alkaline Cr(VI)-contaminated environments. Copyright © 2015, Watts et al.

Performance-Based Contingency Management in Cognitive Remediation Training: A Pilot Study.

PubMed

Kiluk, Brian D; Buck, Matthew B; Devore, Kathleen A; Babuscio, Theresa A; Nich, Charla; Carroll, Kathleen M

2017-01-01

Impairments in attention, working memory, and executive function are common among substance users and may adversely affect SUD treatment outcomes. The ability of cognitive remediation (CR) interventions to improve these deficits is hindered in part because levels of engagement in CR training may be inadequate to achieve benefit. This pilot study aimed to increase CR engagement and improve outcome by implementing contingency management (CM) procedures that reinforce performance improvements on CR tasks. Participants were forty individuals (50% male; 65% African American) in an outpatient substance use treatment facility with mild cognitive impairment who had ≥30-days of abstinence from alcohol and drugs. They were randomized to standard (CR-S; n=21) or CM-enhanced (CR-CM; n=19) cognitive remediation training. CR consisted of 1-hour sessions, three times per week for four weeks (12 sessions). A neuropsychological assessment battery was administered prior to and after the four-week intervention. Both groups had high rates of CR session attendance (mean CR-S=11.7, CR-CM=10.9 sessions). Performance on 8 of the 9 CR tasks significantly improved over time for both conditions, with the CR-CM condition demonstrating greater improvement on a CR Sequenced Recall task [F(1,37)=5.81, p<.05]. Significant improvement was also evident on 4 of 9 neuropsychological assessment measures, with the CR-CM condition showing differential improvement on the Trail Making Test - Part B [F (1,37)=5.34, p<.05]. These findings support the feasibility of using CM procedures to enhance substance users' engagement with CR training and suggest the potential value of more research in this area. Copyright © 2016 Elsevier Inc. All rights reserved.

Findings of the Test and Evaluation Proof of Concept Trial at the NCOT Facility

DTIC Science & Technology

2002-04-01

Submitted by: M. L . Matthews, R. D. G. Webb, A. R. Keeble Humansystems Incorporated® 111 Farquhar Street, 2nd Floor Guelph, Ontario N1H 3N4 Project...Report DRDC- Toronto No. CR-2002-056 Q\\ l Humansystems Incorporated April2002 NCOT: Proof of Concept P517839.PDF [Page: 4 of 39] ~· ©HER MAJESTY THE...QUEEN IN RIGHT OF CANADA (2002) as represented by the Minister of National Defense ©SA MAJESTE LA REINE EN DROIT DUE CANADA (2002) Defense Nationale

Pseudo-extravasation rate constant of dynamic susceptibility contrast-MRI determined from pharmacokinetic first principles.

PubMed

Li, Xin; Varallyay, Csanad G; Gahramanov, Seymur; Fu, Rongwei; Rooney, William D; Neuwelt, Edward A

2017-11-01

Dynamic susceptibility contrast-magnetic resonance imaging (DSC-MRI) is widely used to obtain informative perfusion imaging biomarkers, such as the relative cerebral blood volume (rCBV). The related post-processing software packages for DSC-MRI are available from major MRI instrument manufacturers and third-party vendors. One unique aspect of DSC-MRI with low-molecular-weight gadolinium (Gd)-based contrast reagent (CR) is that CR molecules leak into the interstitium space and therefore confound the DSC signal detected. Several approaches to correct this leakage effect have been proposed throughout the years. Amongst the most popular is the Boxerman-Schmainda-Weisskoff (BSW) K 2 leakage correction approach, in which the K 2 pseudo-first-order rate constant quantifies the leakage. In this work, we propose a new method for the BSW leakage correction approach. Based on the pharmacokinetic interpretation of the data, the commonly adopted R 2 * expression accounting for contributions from both intravascular and extravasating CR components is transformed using a method mathematically similar to Gjedde-Patlak linearization. Then, the leakage rate constant (K L ) can be determined as the slope of the linear portion of a plot of the transformed data. Using the DSC data of high-molecular-weight (~750 kDa), iron-based, intravascular Ferumoxytol (FeO), the pharmacokinetic interpretation of the new paradigm is empirically validated. The primary objective of this work is to empirically demonstrate that a linear portion often exists in the graph of the transformed data. This linear portion provides a clear definition of the Gd CR pseudo-leakage rate constant, which equals the slope derived from the linear segment. A secondary objective is to demonstrate that transformed points from the initial transient period during the CR wash-in often deviate from the linear trend of the linearized graph. The inclusion of these points will have a negative impact on the accuracy of the leakage rate constant, and even make it time dependent. Copyright © 2017 John Wiley & Sons, Ltd.

Simulation of Cooling Rate Effects on Ti-48Al-2Cr-2Nb Crack Formation in Direct Laser Deposition

NASA Astrophysics Data System (ADS)

Yan, Lei; Li, Wei; Chen, Xueyang; Zhang, Yunlu; Newkirk, Joe; Liou, Frank; Dietrich, David

2017-03-01

Transient temperature history is vital in direct laser deposition (DLD) as it reveals the cooling rate at specific temperatures. Cooling rate directly relates to phase transformation and types of microstructure formed in deposits. In this paper, finite element analysis simulation was employed to study the transient temperature history and cooling rate at different experimental setups in the Ti-48Al-2Cr-2Nb DLD process. An innovative prediction strategy was developed to model with a moving Gaussian distribution heat source and element birth and death technology in ANSYS®, and fabricate crack-free deposits. This approach helps to understand and analyze the impact of cooling rate and also explain phase information gathered from x-ray diffraction.

Matrix isolation with an ion transfer device for interference-free simultaneous spectrophotometric determinations of hexavalent and trivalent chromium in a flow-based system.

PubMed

Ohira, Shin-Ichi; Nakamura, Koretaka; Chiba, Mitsuki; Dasgupta, Purnendu K; Toda, Kei

2017-03-01

Chromium speciation by spectrophotometric determination of hexavalent chromium (Cr(VI)) with diphenylcarbazide (DPC) has several problems. These include: (1) the inability to directly detect trivalent chromium (Cr(III)) with DPC, (2) positive interference in Cr(VI) determination by other metal cations and (3) negative interference by any reducing agent present in the sample. These are addressed with an ion transfer device (ITD) in a flow injection analysis system. We previously developed the ITD for electrodialytic separations. Here we separate oppositely charged Cr(III) and Cr(VI) species by the ITD into two different acceptor solutions within ~5 s. The acceptor solutions consist of buffered H 2 O 2 to oxidize the Cr(III) to Cr(VI). Then DPC is added to either acceptor to measure Cr(III) and Cr(VI) spectrophotometrically. The system was optimized to provide the same response for Cr(VI) and Cr(III) with limits of detection (LODs, S/N=3) of 0.5 μg L -1 for each and a throughput rate of 30 samples h -1 . The ITD separation was also effective for matrix isolation and reduction of interferences. Potential cationic interferences were not transferred into the anionic Cr(VI) acceptor stream. Much of the organic compounds in soil extracts were also eliminated as evidenced from standard addition and recovery studies. Copyright © 2016 Elsevier B.V. All rights reserved.

Impact of Fe(III) as an effective electron-shuttle mediator for enhanced Cr(VI) reduction in microbial fuel cells: Reduction of diffusional resistances and cathode overpotentials.

PubMed

Wang, Qiang; Huang, Liping; Pan, Yuzhen; Quan, Xie; Li Puma, Gianluca

2017-01-05

The role of Fe(III) was investigated as an electron-shuttle mediator to enhance the reduction rate of the toxic heavy metal hexavalent chromium (Cr(VI)) in wastewaters, using microbial fuel cells (MFCs). The direct reduction of chromate (CrO 4 - ) and dichromate (Cr 2 O 7 2- ) anions in MFCs was hampered by the electrical repulsion between the negatively charged cathode and Cr(VI) functional groups. In contrast, in the presence of Fe(III), the conversion of Cr(VI) and the cathodic coulombic efficiency in the MFCs were 65.6% and 81.7%, respectively, 1.6 times and 1.4 folds as those recorded in the absence of Fe(III). Multiple analytical approaches, including linear sweep voltammetry, Tafel plot, cyclic voltammetry, electrochemical impedance spectroscopy and kinetic calculations demonstrated that the complete reduction of Cr(VI) occurred through an indirect mechanism mediated by Fe(III). The direct reduction of Cr(VI) with cathode electrons in the presence of Fe(III) was insignificant. Fe(III) played a critical role in decreasing both the diffusional resistance of Cr(VI) species and the overpotential for Cr(VI) reduction. This study demonstrated that the reduction of Cr(VI) in MFCs was effective in the presence of Fe(III), providing an alternative and environmentally benign approach for efficient remediation of Cr(VI) contaminated sites with simultaneous production of renewable energy. Copyright © 2016 Elsevier B.V. All rights reserved.

Immobilization of chromate in hyperalkaline waste streams by green rusts and zero-valent iron.

PubMed

Rogers, Christine M; Burke, Ian T; Ahmed, Imad A M; Shaw, Samuel

2014-01-01

Zero-valent iron (ZVI) and green rusts can be used as reductants to convert chromium from soluble, highly toxic Cr(VI) to insoluble Cr(III). This study compared the reduction rates of Cr(VI) by ZVI and two carbonate green rust phases in alkaline/hyperalkaline solutions. Batch experiments were carried out with synthetic chromate solutions at pH 7.7-12.3 and a chromite ore processing residue (COPR) leachate (pH approximately 12.2). Green rust removes chromate from high pH solutions (pH 10-12.5) very rapidly (<400 s). Chromate reduction rates for both green rust phases were consistently higher than for ZVI throughout the pH range studied; the surface area normalized rate constants were two orders of magnitude higher in the COPR leachate solution at pH 12.2. The performances of both green rusts were unaffected by changes in pH. In contrast, ZVI exhibited a marked decline in reduction rate with increasing pH to become almost ineffective above pH12.

Corrosion behavior of ODS steels with several chromium contents in hot nitric acid solutions

NASA Astrophysics Data System (ADS)

Tanno, Takashi; Takeuchi, Masayuki; Ohtsuka, Satoshi; Kaito, Takeji

2017-10-01

Oxide dispersion strengthened (ODS) steel cladding tubes have been developed for fast reactors. Tempered martensitic ODS steels with 9 and 11 wt% of chromium (9Cr-, 11Cr-ODS steel) are the candidate material in research being carried out at JAEA. In this work, fundamental immersion tests and electrochemical tests of 9 to 12Cr-ODS steels were systematically conducted in various nitric acid solutions at 95 °C. The corrosion rate decreased exponentially with effective solute chromium concentration (Creff) and nitric acid concentration. Addition of vanadium (V) and ruthenium (Ru) also decreased the corrosion rate. The combination of low Creff and dilute nitric acid could not avoid the active mass dissolution during active domain at the beginning of immersion, and the corrosion rate was high. Higher Creff decreased the partial anodic current during the active domain and assisted the passivation of the surface of the steel. Concentrated nitric acid and addition of Ru and V increased partial cathodic current and shifted the corrosion potential to noble side. These effects should have prevented the active mass dissolution and decreased the corrosion rate.

Concept of Aided Phytostabilization of Contaminated Soils in Postindustrial Areas

PubMed Central

Koda, Eugeniusz; Bilgin, Ayla; Vaverková, Mgdalena D.

2017-01-01

The experiment was carried out in order to evaluate the effects of trace element immobilizing soil amendments, i.e., chalcedonite, dolomite, halloysite, and diatomite on the chemical characteristics of soil contaminated with Cr and the uptake of metals by plants. The study utilized analysis of variance (ANOVA), principal component analysis (PCA) and Factor Analysis (FA). The content of trace elements in plants, pseudo-total and extracted by 0.01 M CaCl2, were determined using the method of spectrophotometry. All of the investigated element contents in the tested parts of Indian mustard (Brassica juncea L.) differed significantly in the case of applying amendments to the soil, as well as Cr contamination. The greatest average above-ground biomass was observed when halloysite and dolomite were amended to the soil. Halloysite caused significant increases of Cr concentrations in the roots. The obtained values of bioconcentration and translocation factors observed for halloysite treatment indicate the effectiveness of using Indian mustard in phytostabilization techniques. The addition of diatomite significantly increased soil pH. Halloysite and chalcedonite were shown to be the most effective and decreased the average Cr, Cu and Zn contents in soil. PMID:29295511

Concept of Aided Phytostabilization of Contaminated Soils in Postindustrial Areas.

PubMed

Radziemska, Maja; Koda, Eugeniusz; Bilgin, Ayla; Vaverková, Mgdalena D

2017-12-23

The experiment was carried out in order to evaluate the effects of trace element immobilizing soil amendments, i.e., chalcedonite, dolomite, halloysite, and diatomite on the chemical characteristics of soil contaminated with Cr and the uptake of metals by plants. The study utilized analysis of variance (ANOVA), principal component analysis (PCA) and Factor Analysis (FA). The content of trace elements in plants, pseudo-total and extracted by 0.01 M CaCl₂, were determined using the method of spectrophotometry. All of the investigated element contents in the tested parts of Indian mustard ( Brassica juncea L.) differed significantly in the case of applying amendments to the soil, as well as Cr contamination. The greatest average above-ground biomass was observed when halloysite and dolomite were amended to the soil. Halloysite caused significant increases of Cr concentrations in the roots. The obtained values of bioconcentration and translocation factors observed for halloysite treatment indicate the effectiveness of using Indian mustard in phytostabilization techniques. The addition of diatomite significantly increased soil pH. Halloysite and chalcedonite were shown to be the most effective and decreased the average Cr, Cu and Zn contents in soil.

Contribution of remote substrate binding energy to the enzymatic rate acceleration for 3α-hydroxysteroid dehydrogenase/carbonyl reductase.

PubMed

Hwang, Chi-Ching; Chang, Pei-Ru; Wang, Tzu-Pin

2017-10-01

3α-Hydroxysteroid dehydrogenase/carbonyl reductase (3α-HSD/CR) catalyzes the oxidation of androsterone with NAD + to form androstanedione and NADH with the rate limiting step being the release of NADH. In this study, we elucidate the role of remote substrate binding interactions contributing to the rate enhancement by 3α-HSD/CR through steady-state kinetic studies with the truncated substrate analogs. No enzyme activity was detected for methanol, ethanol, and 2-propanol, which lack the steroid scaffold of androsterone, implying that the steroid scaffold plays an important role in enzyme catalytic specificity. As compared to cyclohexanol, the activity for 2-decalol, androstenol, and androsterone increases by 0.9-, 90-, and 200-fold in k cat , and 37-, 1.9 × 10 6 -, and 1.8 × 10 6 -fold in k cat /K B , respectively. The rate limiting step is hydride transfer for 3α-HSD/CR catalyzing the reaction of cyclohexanol with NAD + based on the observed rapid equilibrium ordered mechanism and equal deuterium isotope effects of 3.9 on V and V/K for cyclohexanol. The k cat /K B value results in ΔG ‡ of 14.7, 12.6, 6.2, and 6.2 kcal/mol for the 3α-HSD/CR catalyzed reaction of cyclohexanol, 2-decalol, androstenol, and androsterone, respectively. Thus, the uniform binding energy from the B-ring of steroids with the active site of 3α-HSD/CR equally contributes 2.1 kcal/mol to stabilize both the transition state and ground state of the ternary complex, leading to the similarity in k cat for 2-decalol and cyclohexanol. Differential binding interactions of the remote BCD-ring and CD-ring of androsterone with the active site of 3α-HSD/CR contribute 8.5 and 6.4 kcal/mol to the stabilization of the transition state, respectively. The removal of the carbonyl group at C17 of androsterone has small effects on catalysis. Both uniform and differential binding energies from the remote sites of androsterone compared to cyclohexanol contribute to the 3α-HSD/CR catalysis, resulting in the increases in k cat and k cat /K B . Copyright © 2017 Elsevier B.V. All rights reserved.

Robust Strategy for Crafting Li5Cr7Ti6O25@CeO2 Composites as High-Performance Anode Material for Lithium-Ion Battery.

PubMed

Mei, Jie; Yi, Ting-Feng; Li, Xin-Yuan; Zhu, Yan-Rong; Xie, Ying; Zhang, Chao-Feng

2017-07-19

A facile strategy was developed to prepare Li 5 Cr 7 Ti 6 O 25 @CeO 2 composites as a high-performance anode material. X-ray diffraction (XRD) and Rietveld refinement results show that the CeO 2 coating does not alter the structure of Li 5 Cr 7 Ti 6 O 25 but increases the lattice parameter. Scanning electron microscopy (SEM) indicates that all samples have similar morphologies with a homogeneous particle distribution in the range of 100-500 nm. Energy-dispersive spectroscopy (EDS) mapping and high-resolution transmission electron microscopy (HRTEM) prove that CeO 2 layer successfully formed a coating layer on a surface of Li 5 Cr 7 Ti 6 O 25 particles and supplied a good conductive connection between the Li 5 Cr 7 Ti 6 O 25 particles. The electrochemical characterization reveals that Li 5 Cr 7 Ti 6 O 25 @CeO 2 (3 wt %) electrode shows the highest reversibility of the insertion and deinsertion behavior of Li ion, the smallest electrochemical polarization, the best lithium-ion mobility among all electrodes, and a better electrochemical activity than the pristine one. Therefore, Li 5 Cr 7 Ti 6 O 25 @CeO 2 (3 wt %) electrode indicates the highest delithiation and lithiation capacities at each rate. At 5 C charge-discharge rate, the pristine Li 5 Cr 7 Ti 6 O 25 only delivers an initial delithiation capacity of ∼94.7 mAh g -1 , and the delithiation capacity merely achieves 87.4 mAh g -1 even after 100 cycles. However, Li 5 Cr 7 Ti 6 O 25 @CeO 2 (3 wt %) delivers an initial delithiation capacity of 107.5 mAh·g -1 , and the delithiation capacity also reaches 100.5 mAh g -1 even after 100 cycles. The cerium dioxide modification is a direct and efficient approach to improve the delithiation and lithiation capacities and cycle property of Li 5 Cr 7 Ti 6 O 25 at large current densities.

Temporal Trends and Future Prediction of Breast Cancer Incidence Across Age Groups in Trivandrum, South India.

PubMed

Mathew, Aleyamma; George, Preethi Sara; Arjunan, Asha; Augustine, Paul; Kalavathy, Mc; Padmakumari, G; Mathew, Beela Sarah

2016-01-01

Increasing breast cancer (BC) incidence rates have been reported from India; causal factors for this increased incidence are not understood and diagnosis is mostly in advanced stages. Trivandrum exhibits the highest BC incidence rates in India. This study aimed to estimate trends in incidence by age from 2005- 2014, to predict rates through 2020 and to assess the stage at diagnosis of BC in Trivandrum. BC cases were obtained from the Population Based Cancer Registry, Trivandrum. Distribution of stage at diagnosis and incidence rates of BC [Age-specific (ASpR), crude (CR) and age-standardized (ASR)] are described and employed with a joinpoint regression model to estimate average annual percent changes (AAPC) and a Bayesian model to estimate predictive rates. BC accounts for 31% (2681/8737) of all female cancers in Trivandrum. Thirty-five percent (944/2681) are <50 years of age and only 9% present with stage I disease. Average age increased from 53 to 56.4 years (p=0.0001), CR (per 105 women) increased from 39 (ASR: 35.2) to 55.4 (ASR: 43.4), AAPC for CR was 5.0 (p=0.001) and ASR was 3.1 (p=0.001). Rates increased from 50 years. Predicted ASpR is 174 in 50-59 years, 231 in > 60 years and overall CR is 80 (ASR: 57) for 2019- 20. BC, mostly diagnosed in advanced stages, is rising rapidly in South India with large increases likely in the future; particularly among post-menopausal women. This increase might be due to aging and/or changes in lifestyle factors. Reasons for the increased incidence and late stage diagnosis need to be studied.

Echolocation Reconsidered: Using Spatial Variations in the Ambient Sound Field To Guide Locomotion.

ERIC Educational Resources Information Center

Ashmead, Daniel H.; Wall, Robert S.; Eaton, Susan B.; Ebinger, Kiara A.; Snook-Hill, Mary-Maureen; And Others

1998-01-01

Presents an acoustical model and evidence from four experiments that children with visual impairments use the buildup of low-frequency sound along walls to guide locomotion. The model differs from the concept of echolocation by emphasizing sound that is ambient, rather than self-produced, and of low frequency. (Author/CR)

Camera for detection of cosmic rays of energy more than 10 Eev on the ISS orbit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garipov, G. K.; Khrenov, B. A.; Panasyuk, M. I.

1998-06-15

Concept of the EHE CR observation from the ISS orbit is discussed. A design of the camera at the Russian segment of the ISS comprising a large area (60 m{sup 2}) parabolic mirror with a photo multiplier pixel retina in its focal plane is described.

The Human Genome Project and Eugenics: Identifying the Impact on Individuals with Mental Retardation.

ERIC Educational Resources Information Center

Kuna, Jason

2001-01-01

This article explores the impact of the mapping work of the Human Genome Project on individuals with mental retardation and the negative effects of genetic testing. The potential to identify disabilities and the concept of eugenics are discussed, along with ethical issues surrounding potential genetic therapies. (Contains references.) (CR)

Consistency Checking in Hypothesis Generation,

DTIC Science & Technology

1979-07-01

In a semantic network model of memory (Col l ins and Loftu s , 1975) , concepts are repr~~ented as nodes inter connected by re lational pathw ays...fornia 90007 Defense Dooinentation Center: C~ neron Stat ion , Bldg . 5 Dr. Kenneth I lain~ondAlexandria , Vi rg ir& a 22314 (i~ c>r ;) Institt~to of

CO2 storage resources, reserves, and reserve growth: Toward a methodology for integrated assessment of the storage capacity of oil and gas reservoirs and saline formations

USGS Publications Warehouse

Burruss, Robert

2009-01-01

Geologically based methodologies to assess the possible volumes of subsurface CO2 storage must apply clear and uniform definitions of resource and reserve concepts to each assessment unit (AU). Application of the current state of knowledge of geologic, hydrologic, geochemical, and geophysical parameters (contingencies) that control storage volume and injectivity allows definition of the contingent resource (CR) of storage. The parameters known with the greatest certainty are based on observations on known traps (KTs) within the AU that produced oil, gas, and water. The aggregate volume of KTs within an AU defines the most conservation volume of contingent resource. Application of the concept of reserve growth to CR volume provides a logical path for subsequent reevaluation of the total resource as knowledge of CO2 storage processes increases during implementation of storage projects. Increased knowledge of storage performance over time will probably allow the volume of the contingent resource of storage to grow over time, although negative growth is possible.

CO2 storage resources, reserves, and reserve growth: Toward a methodology for integrated assessment of the storage capacity of oil and gas reservoirs and saline formations

USGS Publications Warehouse

Burruss, R.C.

2009-01-01

Geologically based methodologies to assess the possible volumes of subsurface CO2 storage must apply clear and uniform definitions of resource and reserve concepts to each assessment unit (AU). Application of the current state of knowledge of geologic, hydrologic, geochemical, and geophysical parameters (contingencies) that control storage volume and injectivity allows definition of the contingent resource (CR) of storage. The parameters known with the greatest certainty are based on observations on known traps (KTs) within the AU that produced oil, gas, and water. The aggregate volume of KTs within an AU defines the most conservation volume of contingent resource. Application of the concept of reserve growth to CR volume provides a logical path for subsequent reevaluation of the total resource as knowledge of CO2 storage processes increases during implementation of storage projects. Increased knowledge of storage performance over time will probably allow the volume of the contingent resource of storage to grow over time, although negative growth is possible. ?? 2009 Elsevier Ltd. All rights reserved.

The importance of seminal plasma on the fertility of subsequent artificial inseminations in swine.

PubMed

Rozeboom, K J; Troedsson, M H; Hodson, H H; Shurson, G C; Crabo, B G

2000-02-01

Yorkshire x Landrace sows and gilts were used in a 3x2 factorial arrangement of treatments to determine the effect of uterine inflammation induced by either killed spermatozoa (KS) or bacterial lipopolysaccharide (LPS) on the fertility of a subsequent, optimally timed AI. Estrus was detected with a mature boar twice daily. Twelve hours after the first detection of estrus, females received intrauterine infusions of an inflammatory stimulus consisting of a 100-mL dose of extender containing 3x10(9) KS (n = 40), 20 microg of LPS (n = 40; positive control) or extender alone (n = 40; negative control). An insemination was performed 12 to 18 h later with 3x10(9) motile spermatozoa (i.e., fertile AI) suspended in either 100 mL of seminal plasma (SP; n = 60) or extender replenished with of estrogens (5 microg of estradiol-17beta, 4.5 microg of estrone sulfate, and 2 microg of estrone; n= 60). Transcutaneous ultrasound was performed at the time of fertile AI and again 24 h later to detect the presence or absence of preovulatory follicles. A fertile AI performed within 24 h before ovulation was considered optimal. Conception (CR) and farrowing rates (FR) were greater in females that received a fertile AI diluted with SP compared with extender (P<.01), and there was a significant (P<.05) treatment x fertile AI dilution medium interaction for both CR and FR. Females that received a fertile AI 12 h after infusion of extender had similar CR and FR regardless of fertile AI dilution medium. After inducing an inflammatory response with either KS or LPS, CR and FR were higher in females that received a fertile AI diluted with SP compared with fertile AI dilution with extender (P<.05). The effects of treatment and AI dilution media and their interactions were not significant for litter size in females that farrowed. These results show that the fertility of a subsequent AI can be impaired when semen is deposited into an inflamed environment created by an earlier AI, and this impairment was offset by inclusion of SP in the subsequent insemination.

[Clinical features and prognosis of acute myeloid leukemia-M(4).].

PubMed

Li, Wei; Mi, Ying-Chang; Wang, Ying; Lin, Dong; Wei, Hui; Liu, Xu-Ping; Bian, Shou-Geng; Wang, Jian-Xiang

2010-01-01

To investigate factors that affect survival and prognosis of acute myeloid leukemia (AML)-M(4). Seventy AML-M(4) patients were divided into three groups, neither eosinophilia nor inv(16)\\[Eos(-)\\], eosinophilia with inv (16)\\[Eos(+) inv(16)(+)\\], and eosinophilia with no inv(16)\\[Eos(+) inv(16)(-)\\]. Clinical features, immunophenotype, chromosome karyotype, overall survival (OS) and relapse-free survival (RFS) were analyzed. The total complete remssion (CR) rate was 85.7%, CR rate after the first course of induction therapy was 71.4%. The median OS was 20 (1.2 - 162.4) months, and median RFS 78.0 (1.2 - 129.5) months. The 3 and 5 year OS rates were 42% and 42%, and 3 and 5 year RFS rates were 59% and 54%, respectively. The CR rate, CR after the first course of induction therapy and the median OS for the Eos(-) group were 76.9%, 61.5% and 11.2 (1.2 - 162.4) months; for the Eos(+) group were 96.8%, 89.6% and did not reach; for the Eos(+)inv16(+) group were 100%, 94.4% and did not reach; and for the Eos(+) inv(16)(-) group were 91.7%,69.2% and 14.3 months respectively. The statistical assay showed significant difference between Eos(+)inv(16)(-) and Eos(+)inv(16)(+) groups in OS. The Eos(+) patients present with early onset and low count of platelets. Eosinophilia emerged as a favorable prognostic factor, and the concomitant presence of both eosinophilia and inv(16) is associated with a significantly favorlable prognosis.

Petrologic and oxygen isotopic study of ALH 85085-like chondrites

NASA Astrophysics Data System (ADS)

Prinz, M.; Weisberg, M. K.; Clayton, R. N.; Mayeda, T. K.; Ebihara, M.

1994-07-01

Four meteorites (PAT 91546, PCA 91328, PCA 91452, PCA 91467) petrologically similar to ALH 85085 chondrite have now been found. Previous studies of ALH 85085 showed it be a new kind of CR-related microchondrule-bearing chondrite, although one called it a sub-chondrite. The purpose of this study is to learn more about ALH 85085-like meteorites and their relationship to CR and CR-related (LEW 85332, Acfer 182, Bencubbin) chondrites. The methods used included petrology, INA bulk chemical analysis (PAT 91546, PCA 91467), and O isotopic analyses of the whole rocks and separated chondrules and dark inclusions (DIs) from PAT 91546. Since microchondrules and fragments are approximately 20 microns it was necessary to analyze composite samples for O; one was of approximately 100 chondrules, and another was of 5 DIs. Petrologically, the four meteorites are similar to ALH 85085, and there is no basis for determining if all of them, or any combinations, are paired. Mineralogically, olivine and pyroxene are highly magnesian FeNi metal generally has 3-10% Ni, and has a positive Ni-Co correlation similar to that in CR and CR-related chondrites. Refractory inclusions are similar in size to the chondrules and have the following assemblages: (1) hibonite-perovskite, (2) melilite-fassaite-forsterite, (3) grossite (Ca-dialuminate)-melilite-perovskite, (4) spinel-melilite, and (5) spinel-pyroxene aggregates. Chemically, INA analyses indicate that PAT 91546 and PCA 91467 are generally similar to ALH 85085. Oxygen isotopic analyses of the four whole-rock compositions fall along the CR mixing line as does ALH 85085; they are also close to LEW 85332, Acfer 182, and Bencubbin. This supports the concept that these are all CR-related chondrites. Even stronger support is found in the compositions of the chondrules and DIs in PAT 91546, which also plot on or near the CR line.

A calibration-free formulation of the complementary relationship of evaporation for continental-scale hydrology

NASA Astrophysics Data System (ADS)

Szilagyi, Jozsef; Crago, Richard; Qualls, Russell

2017-01-01

An important scaling consideration is introduced into the formulation of the complementary relationship (CR) of land surface evapotranspiration (ET) by specifying the maximum possible evaporation rate (Epmax) of a small water body (or wet patch) as a result of adiabatic drying from the prevailing near-neutral atmospheric conditions. In dimensionless form the CR therefore becomes yB = f(Epmax-EpEpmax-EwxB) = f(X) = 2X2 - X3, where yB = ET/Ep, xB = Ew/Ep. Ew is the wet-environment evaporation rate as given by the Priestley-Taylor equation, Ep is the evaporation rate of the same small wet surface for which Epmax is specified and estimated by the Penman equation. With the help of North American Regional Reanalysis data, the CR this way yields better continental-scale performance than earlier, calibrated versions of it and is on par with current land surface model results, the latter requiring vegetation, soil information and soil moisture bookkeeping. Validation has been performed by Parameter-Elevation Regressions on Independent Slopes Model precipitation and United States Geological Survey runoff data. A novel approach is also introduced to calculate the value of the Priestley-Taylor parameter to be used with continental-scale data, making the new formulation of the CR completely calibration free.

Quality ratings of frequency-compressed speech by participants with extensive high-frequency dead regions in the cochlea

PubMed Central

Salorio-Corbetto, Marina; Baer, Thomas; Moore, Brian C. J.

2017-01-01

Abstract Objective: The objective was to assess the degradation of speech sound quality produced by frequency compression for listeners with extensive high-frequency dead regions (DRs). Design: Quality ratings were obtained using values of the starting frequency (Sf) of the frequency compression both below and above the estimated edge frequency, fe, of each DR. Thus, the value of Sf often fell below the lowest value currently used in clinical practice. Several compression ratios were used for each value of Sf. Stimuli were sentences processed via a prototype hearing aid based on Phonak Exélia Art P. Study sample: Five participants (eight ears) with extensive high-frequency DRs were tested. Results: Reductions of sound-quality produced by frequency compression were small to moderate. Ratings decreased significantly with decreasing Sf and increasing CR. The mean ratings were lowest for the lowest Sf and highest CR. Ratings varied across participants, with one participant rating frequency compression lower than no frequency compression even when Sf was above fe. Conclusions: Frequency compression degraded sound quality somewhat for this small group of participants with extensive high-frequency DRs. The degradation was greater for lower values of Sf relative to fe, and for greater values of CR. Results varied across participants. PMID:27724057

Bayesian prediction of lung and breast cancer mortality among women in Spain (2014-2020).

PubMed

Martín-Sánchez, Juan Carlos; Clèries, Ramon; Lidón, Cristina; González-de Paz, Luís; Lunet, Nuno; Martínez-Sánchez, Jose M

2016-08-01

Breast cancer (BC) is the main cause of cancer mortality among women, and mortality from lung cancer (LC) is increasing among women. The purpose of the present study was to project the mortality rates of both cancers and predict when LC mortality will exceed BC mortality. The cancer mortality data and female population distribution were obtained from the Spanish National Statistics Institute. Crude rate (CR), age-standardized rate (ASR), and age-specific rate were calculated for the period 1980-2013 and projected for the period 2014-2020 using a Bayesian log-linear Poisson model. All calculated rates were greater for BC than for LC in 2013 (CR, 27.3 versus 17.3; ASR, 13.5 versus 9.3), and the CR was not projected to change by 2020 (29.2 versus 27.6). The ASR for LC is expected to surpass that of BC in 2019 (12.9 versus 12.7). By 2020 the LC mortality rates may exceed those of BC for ages 55-74 years, possibly because of the prevalence of smoking among women, and the screening for and more effective treatment of BC. BC screening could be a good opportunity to help smokers quit by offering counseling and behavioral intervention. Copyright © 2016 Elsevier Ltd. All rights reserved.

Diffusional creep and creep degradation in the dispersion-strengthened alloy TD-NiCr

NASA Technical Reports Server (NTRS)

Whittenberger, J. D.

1972-01-01

Dispersoid-free regions were observed in TD-NiCr (Ni-20Cr-2ThO2) after slow strain rate testing in air from 1145 to 1590 K. Formation of the dispersoid-free regions appears to be the result of diffusional creep. The net effect of this creep is the degradation of TD-NiCr to a duplex microstructure. Degradation is further enhanced by the formation of voids and integranular oxidation in the thoria-free regions. These regions apparently provided sites for void formation and oxide growth since the strength and oxidation resistance of Ni-20Cr is much less than Ni-20Cr-2ThO2. This localized oxidation does not appear to reduce the static load bearing capacity of TD-NiCr since long stress rupture lives were observed even with heavily oxidized microstructures. But this oxidation does significantly reduce the ductility and impact resistance of the material. Dispersoid-free bands and voids were also observed for two other dispersion strengthened alloys, TD-NiCrAl and IN-853. Thus, it appears that diffusional creep is charactertistic of dispersion-strengthened alloys and can play a major role in the creep degradation of these materials.

Treatment of Cr(VI)-containing wastewaters with exopolysaccharide-producing cyanobacteria in pilot flow through and batch systems.

PubMed

Colica, Giovanni; Mecarozzi, Pier Cesare; De Philippis, Roberto

2010-08-01

Seven exopolysaccharide-producing cyanobacteria were tested with regard to their capability to remove Cr(VI) from the wastewater of a plating industry. The cyanobacterium which showed, under lab conditions, the most promising features with regard to both Cr(VI) removal (about 12 mg of Cr(VI) removed per gram of dry biomass) and growth characteristics (highest growth rate and simplest culture medium) was Nostoc PCC7936. Furthermore, in lab experiments, it was also found that a HCl pretreatment is essential to abate the concentration of Cr(VI) in solution and that the viability of the biomass is not necessary. Subsequently, three pilot devices were tested, one batch (a dialysis cell) and two flow-through systems (a filter press and a column filled with quartz grain). The best performances were obtained with the filter press, where it was observed a sharp decrease in the concentration of Cr(VI), partly due to the adsorption of the metal by the biomass (about 50%) and partly due to its reduction to Cr(III). The results are discussed in terms of the role played by the different components (biomass and polysaccharide) of the cyanobacterial cultures in the removal of Cr(VI).

Phase Evolution in and Creep Properties of Nb-Rich Nb-Si-Cr Eutectics

NASA Astrophysics Data System (ADS)

Gang, Florian; Kauffmann, Alexander; Heilmaier, Martin

2018-03-01

In this work, the Nb-rich ternary eutectic in the Nb-Si-Cr system has been experimentally determined to be Nb-10.9Si-28.4Cr (in at. pct). The eutectic is composed of three main phases: Nb solid solution (Nbss), β-Cr2Nb, and Nb9(Si,Cr)5. The ternary eutectic microstructure remains stable for several hundred hours at a temperature up to 1473 K (1200 °C). At 1573 K (1300 °C) and above, the silicide phase Nb9(Si,Cr)5 decomposes into α-Nb5Si3, Nbss, and β-Cr2Nb. Under creep conditions at 1473 K (1200 °C), the alloy deforms by dislocation creep while the major creep resistance is provided by the silicide matrix. If the silicide phase is fragmented and, thus, its matrix character is destroyed by prior heat treatment [ e.g., at 1773 K (1500 °C) for 100 hours], creep is mainly controlled by the Laves phase β-Cr2Nb, resulting in increased minimum strain rates. Compared to state of the art Ni-based superalloys, the creep resistance of this three-phase eutectic alloy is significantly higher.

Clinical evaluation of CR versus plain film for neonatal ICU applications

NASA Astrophysics Data System (ADS)

Andriole, Katherine P.; Brasch, Robert C.; Gooding, Charles A.; Gould, Robert G.; Huang, H. K.

1995-05-01

The clinical utility of computed radiography (CR) versus screen-film for neonatal intensive care unit (ICU) applications is investigated. The latest versions of standard ST-V and high- resolution HR-V CR imaging plates were compared via measurements of image contrast, spatial resolution and signal-to-noise. The ST-V imaging plate was found to have equivalent spatial resolution and object detectability at a lower required dose than the HR-V, and was therefore chosen as the CR plate to use in clinical trials in which a modified film cassette containing the CR imaging plate, a conventional screen and film was utilized. For 50 portable neonatal chest examinations, plain film was subjectively compared to the perfectly matched, simultaneously obtained CR hardcopy and softcopy images. Grading of overall image quality was on a scale of one (poor) to five (excellent). Readers rated the visualization of various structures in the chest (i.e., lung parenchyma, pulmonary vasculature, tubes/lines) as well as the visualization of pathologic findings. Preliminary results indicate that the image quality of both CR soft and hardcopy are comparable to plain film and that CR may be a suitable alternative to screen-film imaging for portable neonatal chest x rays.

Characteristics of Eutectic α(Cr,Fe)-(Cr,Fe)23C6 in the Eutectic Fe-Cr-C Hardfacing Alloy

NASA Astrophysics Data System (ADS)

Lai, Hsuan-Han; Hsieh, Chih-Chun; Lin, Chi-Ming; Wu, Weite

2017-01-01

A specific eutectic (Cr,Fe)-(Cr,Fe)23C6 structure had been previously reported in the research studies of Fe-Cr-C hardfacing alloys. In this study, a close observation and discussion of the eutectic (Cr,Fe)-(Cr,Fe)23C6 were conducted. The eutectic solidification occurred when the chromium content of the alloy exceeded 35 wt pct. The eutectic structure showed a triaxial radial fishbone structure which was the so called "complex regular structure." Lamellar costa plates showed local asymmetry at two sides of a spine. Individual costae were able to combine as one, and spines showed extra branches. Costae that were nearly parallel to the heat flow direction were longer than those that were vertical to the heat flow direction. The triaxial spines preferred to intersect at 120 deg, while the costae preferred to intersect the spine at 90 deg and 35.26 deg due to the lattice relationships. The solidified metal near the fusion boundary showed an irregular structure instead of a complex regular structure. The reason for the irregular morphology was the high growth rate near the fusion boundary.

Microstructure and Mechanical Properties of Cr-SiC Particles-Reinforced Fe-Based Alloy Coating

NASA Astrophysics Data System (ADS)

Wang, Fu-cheng; Du, Xiao-dong; Zhan, Ma-ji; Lang, Jing-wei; Zhou, Dan; Liu, Guang-fu; Shen, Jian

2015-12-01

In this study, SiC particles were first coated with Cr to form a layer that can protect the SiC particles from dissolution in the molten pool. Then, the Cr-SiC powder was injected into the tail of molten pool during plasma-transferred arc welding process (PTAW), where the temperature was relatively low, to prepare Cr-SiC particles reinforced Fe-based alloy coating. The microstructure and phase composition of the powder and surface coatings were analyzed, and the element distribution and hardness at the interfacial region were also evaluated. The protective layer consists of Cr3Si, Cr7C3, and Cr23C6, which play an important role in the microstructure and mechanical properties. The protective layer is dissolved in the molten pool forming a flocculent region and a transition region between the SiC particles and the matrix. The tribological performance of the coating was also assessed using a ring-block sliding wear tester with GGr15 grinding ring under 490 and 980 N load. Cr-SiC particles-reinforced coating has a lower wear rate than the unreinforced coating.

Reversing pathologically increased EEG power by acoustic coordinated reset neuromodulation

PubMed Central

Adamchic, Ilya; Toth, Timea; Hauptmann, Christian; Tass, Peter Alexander

2014-01-01

Acoustic Coordinated Reset (CR) neuromodulation is a patterned stimulation with tones adjusted to the patient's dominant tinnitus frequency, which aims at desynchronizing pathological neuronal synchronization. In a recent proof-of-concept study, CR therapy, delivered 4–6 h/day more than 12 weeks, induced a significant clinical improvement along with a significant long-lasting decrease of pathological oscillatory power in the low frequency as well as γ band and an increase of the α power in a network of tinnitus-related brain areas. As yet, it remains unclear whether CR shifts the brain activity toward physiological levels or whether it induces clinically beneficial, but nonetheless abnormal electroencephalographic (EEG) patterns, for example excessively decreased δ and/or γ. Here, we compared the patients' spontaneous EEG data at baseline as well as after 12 weeks of CR therapy with the spontaneous EEG of healthy controls by means of Brain Electrical Source Analysis source montage and standardized low-resolution brain electromagnetic tomography techniques. The relationship between changes in EEG power and clinical scores was investigated using a partial least squares approach. In this way, we show that acoustic CR neuromodulation leads to a normalization of the oscillatory power in the tinnitus-related network of brain areas, most prominently in temporal regions. A positive association was found between the changes in tinnitus severity and the normalization of δ and γ power in the temporal, parietal, and cingulate cortical regions. Our findings demonstrate a widespread CR-induced normalization of EEG power, significantly associated with a reduction of tinnitus severity. PMID:23907785