Artificial Intelligent Platform as Decision Tool for Asset Management, Operations and Maintenance.

PubMed

2018-01-04

An Artificial Intelligence (AI) system has been developed and implemented for water, wastewater and reuse plants to improve management of sensors, short and long term maintenance plans, asset and investment management plans. It is based on an integrated approach to capture data from different computer systems and files. It adds a layer of intelligence to the data. It serves as a repository of key current and future operations and maintenance conditions that a plant needs have knowledge of. With this information, it is able to simulate the configuration of processes and assets for those conditions to improve or optimize operations, maintenance and asset management, using the IViewOps (Intelligent View of Operations) model. Based on the optimization through model runs, it is able to create output files that can feed data to other systems and inform the staff regarding optimal solutions to the conditions experienced or anticipated in the future.

Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

NASA Astrophysics Data System (ADS)

Milana; Khan, M. K.; Munive, J. E.

2014-07-01

The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective.

An end-to-end communications architecture for condition-based maintenance applications

NASA Astrophysics Data System (ADS)

Kroculick, Joseph

2014-06-01

This paper explores challenges in implementing an end-to-end communications architecture for Condition-Based Maintenance Plus (CBM+) data transmission which aligns with the Army's Network Modernization Strategy. The Army's Network Modernization strategy is based on rolling out network capabilities which connect the smallest unit and Soldier level to enterprise systems. CBM+ is a continuous improvement initiative over the life cycle of a weapon system or equipment to improve the reliability and maintenance effectiveness of Department of Defense (DoD) systems. CBM+ depends on the collection, processing and transport of large volumes of data. An important capability that enables CBM+ is an end-to-end network architecture that enables data to be uploaded from the platform at the tactical level to enterprise data analysis tools. To connect end-to-end maintenance processes in the Army's supply chain, a CBM+ network capability can be developed from available network capabilities.

An optimization method for condition based maintenance of aircraft fleet considering prognostics uncertainty.

PubMed

Feng, Qiang; Chen, Yiran; Sun, Bo; Li, Songjie

2014-01-01

An optimization method for condition based maintenance (CBM) of aircraft fleet considering prognostics uncertainty is proposed. The CBM and dispatch process of aircraft fleet is analyzed first, and the alternative strategy sets for single aircraft are given. Then, the optimization problem of fleet CBM with lower maintenance cost and dispatch risk is translated to the combinatorial optimization problem of single aircraft strategy. Remain useful life (RUL) distribution of the key line replaceable Module (LRM) has been transformed into the failure probability of the aircraft and the fleet health status matrix is established. And the calculation method of the costs and risks for mission based on health status matrix and maintenance matrix is given. Further, an optimization method for fleet dispatch and CBM under acceptable risk is proposed based on an improved genetic algorithm. Finally, a fleet of 10 aircrafts is studied to verify the proposed method. The results shows that it could realize optimization and control of the aircraft fleet oriented to mission success.

An Optimization Method for Condition Based Maintenance of Aircraft Fleet Considering Prognostics Uncertainty

PubMed Central

Chen, Yiran; Sun, Bo; Li, Songjie

2014-01-01

An optimization method for condition based maintenance (CBM) of aircraft fleet considering prognostics uncertainty is proposed. The CBM and dispatch process of aircraft fleet is analyzed first, and the alternative strategy sets for single aircraft are given. Then, the optimization problem of fleet CBM with lower maintenance cost and dispatch risk is translated to the combinatorial optimization problem of single aircraft strategy. Remain useful life (RUL) distribution of the key line replaceable Module (LRM) has been transformed into the failure probability of the aircraft and the fleet health status matrix is established. And the calculation method of the costs and risks for mission based on health status matrix and maintenance matrix is given. Further, an optimization method for fleet dispatch and CBM under acceptable risk is proposed based on an improved genetic algorithm. Finally, a fleet of 10 aircrafts is studied to verify the proposed method. The results shows that it could realize optimization and control of the aircraft fleet oriented to mission success. PMID:24892046

Progress toward an advanced condition monitoring system for reusable rocket engines

NASA Technical Reports Server (NTRS)

Maram, J.; Barkhoudarian, S.

1987-01-01

A new generation of advanced sensor technologies will allow the direct measurement of critical/degradable rocket engine components' health and the detection of degraded conditions before component deterioration affects engine performance, leading to substantial improvements in reusable engines' operation and maintenance. When combined with a computer-based engine condition-monitoring system, these sensors can furnish a continuously updated data base for the prediction of engine availability and advanced warning of emergent maintenance requirements. Attention is given to the case of a practical turbopump and combustion device diagnostic/prognostic health-monitoring system.

Development of maintenance composite priority index for buildings in Palestine: A pilot case study

NASA Astrophysics Data System (ADS)

Issa, Amjad; Awad, Riyad

2017-11-01

The current building maintenance practices in Palestine are not based on scientific systematic methods. Most of the municipalities use one criterion to define the maintenance priorities, which is the "worst-first" criterion. Therefore, the current practices in defining buildings maintenance plans are not dealing with the known phases that are generally followed, including those in establishing building inventories, building condition survey, detailed visual inspection, identification of the proper maintenance and rehabilitation measures, and setting priorities. Accordingly, the recent preparation of the Operation and Maintenance (O&M) Manual for Palestinian municipalities is an important step to guide them towards preparing and implementing their O&M priority-based plans, considering scare resources. During the course of preparation of the Manual, the proposed procedures were applied at ten pilot municipalities. This study aims to explore the outcome of the implementation of the 2014/2015 O&M buildings maintenance priorities at these municipalities through the development of maintenance composite priority index (PI). The new proposed priority index is a scientific tool that will identify the priority of maintenance buildings through using a systematic procedure instead of first worst one. To achieve this, analyses of the outcome of a questionnaire designed to collect relevant information from these municipalities was conducted. The maintenance priority index for buildings is calculated considering different indicators among them building status (condition), classification and importance of the building, number of beneficiaries (users), safety aspects (severity level in the building), and people complaints. The main component of the PI is the building condition index (BCI) which forms about 40% of the total weight. The physical inspection, which is the main input for calculating the BCI, is conducted on two levels; the primary level, and the secondary level. The buildings are ranked in descending order based on the PI values for each public building. The buildings that have the highest values of PI take the most priority till the specified asset maintenance budget for the targeted year is achieved. Finally, the results indicate that most of the maintenance works are funded by municipalities own budgets and not by the government.

Air Vehicle Integration and Technology Research (AVIATR). Task Order 0003: Condition-Based Maintenance Plus Structural Integrity (CBM+SI) Demonstration (April 2011 to August 2011)

DTIC Science & Technology

2011-08-01

investigated. Implementation of this technology into the maintenance framework depends on several factors, including safety of the structural system, cost... Maintenance Parameters The F-15 Program has indicated that, in practice , maintenance actions are generally performed on flight hour multiples of 200...Risk Analysis or the Perform Cost Benefit Analysis sections of the flowchart. 4.6. Determine System Configurations The current maintenance practice

A Wavelet Bicoherence-Based Quadratic Nonlinearity Feature for Translational Axis Condition Monitoring

PubMed Central

Li, Yong; Wang, Xiufeng; Lin, Jing; Shi, Shengyu

2014-01-01

The translational axis is one of the most important subsystems in modern machine tools, as its degradation may result in the loss of the product qualification and lower the control precision. Condition-based maintenance (CBM) has been considered as one of the advanced maintenance schemes to achieve effective, reliable and cost-effective operation of machine systems, however, current vibration-based maintenance schemes cannot be employed directly in the translational axis system, due to its complex structure and the inefficiency of commonly used condition monitoring features. In this paper, a wavelet bicoherence-based quadratic nonlinearity feature is proposed for translational axis condition monitoring by using the torque signature of the drive servomotor. Firstly, the quadratic nonlinearity of the servomotor torque signature is discussed, and then, a biphase randomization wavelet bicoherence is introduced for its quadratic nonlinear detection. On this basis, a quadratic nonlinearity feature is proposed for condition monitoring of the translational axis. The properties of the proposed quadratic nonlinearity feature are investigated by simulations. Subsequently, this feature is applied to the real-world servomotor torque data collected from the X-axis on a high precision vertical machining centre. All the results show that the performance of the proposed feature is much better than that of original condition monitoring features. PMID:24473281

Product Support Manager Guidebook

DTIC Science & Technology

2011-04-01

package is being developed using supportability analysis concepts such as Failure Mode, Effects and Criticality Analysis (FMECA), Fault Tree Analysis ( FTA ...Analysis (LORA) Condition Based Maintenance + (CBM+) Fault Tree Analysis ( FTA ) Failure Mode, Effects, and Criticality Analysis (FMECA) Maintenance Task...Reporting and Corrective Action System (FRACAS), Fault Tree Analysis ( FTA ), Level of Repair Analysis (LORA), Maintenance Task Analysis (MTA

A Tailored Ontology Supporting Sensor Implementation for the Maintenance of Industrial Machines.

PubMed

Maleki, Elaheh; Belkadi, Farouk; Ritou, Mathieu; Bernard, Alain

2017-09-08

The longtime productivity of an industrial machine is improved by condition-based maintenance strategies. To do this, the integration of sensors and other cyber-physical devices is necessary in order to capture and analyze a machine's condition through its lifespan. Thus, choosing the best sensor is a critical step to ensure the efficiency of the maintenance process. Indeed, considering the variety of sensors, and their features and performance, a formal classification of a sensor's domain knowledge is crucial. This classification facilitates the search for and reuse of solutions during the design of a new maintenance service. Following a Knowledge Management methodology, the paper proposes and develops a new sensor ontology that structures the domain knowledge, covering both theoretical and experimental sensor attributes. An industrial case study is conducted to validate the proposed ontology and to demonstrate its utility as a guideline to ease the search of suitable sensors. Based on the ontology, the final solution will be implemented in a shared repository connected to legacy CAD (computer-aided design) systems. The selection of the best sensor is, firstly, obtained by the matching of application requirements and sensor specifications (that are proposed by this sensor repository). Then, it is refined from the experimentation results. The achieved solution is recorded in the sensor repository for future reuse. As a result, the time and cost of the design process of new condition-based maintenance services is reduced.

Nicotine enhances operant responding for qualitatively distinct reinforcers under maintenance and extinction conditions.

PubMed

Barret, Scott T; Bevins, Rick A

2013-12-01

Nicotine enhancement of reward has been implicated as an important contributor to tobacco addiction. Despite the attention that reward enhancement has received, the behavioral mechanisms whereby nicotine enhances operant responding remain largely unknown. The present study sought to extend previous work by evaluating the effects of nicotine on responding for two qualitatively different rewards (visual stimulation (VS) and 4% sucrose solution) under fixed-ratio (FR) maintenance and extinction conditions. Sprague–Dawley rats were trained to press an active lever for VS (Experiment 1) or 4% sucrose solution (Experiment 2) and evaluated over 15 sessions on a FR5 schedule of reinforcement. Nicotine (0.4 mg base/kg, SC) or saline were administered 5 min before each session; the alternate solution was given in the home cage after the session. The effects of nicotine on extinction responding were then assessed over 5 sessions and rats were divided into 4 groups based on drug of injection received during FR-maintenance and extinction phases (maintenance–extinction): Nic–Nic, Nic–Sal, Sal–Sal, and Sal–Nic. Nicotine increased active lever response rates for both VS and 4% sucrose under FR5 maintenance conditions. Nicotine also increased response rates in the Nic–Nic group relative to all other groups under extinction conditions in both experiments, though this effect had greater longevity following VS maintenance conditions than sucrose. Enhancement of responding during extinction does not appear dependent upon locomotor activation by nicotine.

Performance-based maintenance of gas turbines for reliable control of degraded power systems

NASA Astrophysics Data System (ADS)

Mo, Huadong; Sansavini, Giovanni; Xie, Min

2018-03-01

Maintenance actions are necessary for ensuring proper operations of control systems under component degradation. However, current condition-based maintenance (CBM) models based on component health indices are not suitable for degraded control systems. Indeed, failures of control systems are only determined by the controller outputs, and the feedback mechanism compensates the control performance loss caused by the component deterioration. Thus, control systems may still operate normally even if the component health indices exceed failure thresholds. This work investigates the CBM model of control systems and employs the reduced control performance as a direct degradation measure for deciding maintenance activities. The reduced control performance depends on the underlying component degradation modelled as a Wiener process and the feedback mechanism. To this aim, the controller features are quantified by developing a dynamic and stochastic control block diagram-based simulation model, consisting of the degraded components and the control mechanism. At each inspection, the system receives a maintenance action if the control performance deterioration exceeds its preventive-maintenance or failure thresholds. Inspired by realistic cases, the component degradation model considers random start time and unit-to-unit variability. The cost analysis of maintenance model is conducted via Monte Carlo simulation. Optimal maintenance strategies are investigated to minimize the expected maintenance costs, which is a direct consequence of the control performance. The proposed framework is able to design preventive maintenance actions on a gas power plant, to ensuring required load frequency control performance against a sudden load increase. The optimization results identify the trade-off between system downtime and maintenance costs as a function of preventive maintenance thresholds and inspection frequency. Finally, the control performance-based maintenance model can reduce maintenance costs as compared to CBM and pre-scheduled maintenance.

Air Vehicle Integration and Technology Research (AVIATR). Task Order 0003: Condition-Based Maintenance Plus Structural Integrity (CBM+SI) Demonstration (September 2011 to March 2012)

DTIC Science & Technology

2012-03-01

the potential maintenance plans are compared via the TPMs , which are related to the cost of ownership of the fleet and to aircraft availability. 7...due to maintenance of the wing system is reported because this measure has a straightforward interpretation. This TPM is referred to as Fleet DT...3.2.2. Maintenance Parameters The F-15 Program has indicated that, in practice , maintenance actions are generally performed on multiples of 200 FH. For

Process-based reference conditions: An alternative approach for managed river systems

NASA Astrophysics Data System (ADS)

Grams, P.; Melis, T.; Wright, S.; Schmidt, J.; Topping, D.

2008-12-01

Physical reference conditions, whether based on historic information or the condition of nearby less impaired systems, provide necessary information that contributes to an assessment of stream condition and the nature of channel transformation. In many cases, however, the utility of this traditional 'reference' approach may end at the assessment stage and not be applicable to establishing and implementing restoration goals. Ongoing impacts such as continued existence of an upstream dam or the persistence of invasive vegetation may render restoration based on a physical reference infeasible. In these circumstances, an alternative approach is to identify and describe reference processes in place of physical reference conditions. This is the case for the Colorado River where large dams, a commitment to hydropower production, and legal mandates for regional distribution and off- channel consumption of water greatly reduce the relevance of historical conditions in setting goals for rehabilitation. In this setting, two strategies are available for setting reference conditions. One is maintenance of post-dam sediment mass balance, which attempts to ensure that the channel does not continue to degrade or aggrade and that riverine habitats do not continue to diverge from their historical condition. Post- dam sediment mass balance can be quantified at a reconnaissance or project scale. The second strategy is to define key processes that maintain the native ecosystem. These processes may, or may not, be consistent with maintenance of sediment mass balance, but they may be key to rejuvenation of spawning and rearing habitats, maintenance of historical ranges of temperature and turbidity, maintenance of a sustainable food base for the native aquatic community, or maintaining other riverine resources. Both strategies require careful monitoring of processes (e.g. sediment flux), which may add considerably to the cost and complexity of a monitoring program. An additional challenge in adopting the second strategy is that it is difficult to define when a process is adequately restored, since many ecosystem processes collectively limit recovery of populations of native communities.

Acquisition and Maintenance of Scripts in Aphasia: A Comparison of Two Cuing Conditions

PubMed Central

Cherney, Leora R.; Kaye, Rosalind C.; van Vuuren, Sarel

2014-01-01

Purpose This study was designed to compare acquisition and maintenance of scripts under two conditions: High Cue which provided numerous multimodality cues designed to minimize errors, and Low Cue which provided minimal cues. Methods In a randomized controlled cross-over study, eight individuals with chronic aphasia received intensive computer-based script training under two cuing conditions. Each condition lasted three weeks, with a three-week washout period. Trained and untrained scripts were probed for accuracy and rate at baseline, during treatment, immediately post-treatment, and at three and six weeks post-treatment. Significance testing was conducted on gain scores and effect sizes were calculated. Results Training resulted in significant gains in script acquisition with maintenance of skills at three and six weeks post-treatment. Differences between cuing conditions were not significant. When severity of aphasia was considered, there also were no significant differences between conditions, although magnitude of change was greater in the High Cue condition versus the Low Cue condition for those with more severe aphasia. Conclusions Both cuing conditions were effective in acquisition and maintenance of scripts. The High Cue condition may be advantageous for those with more severe aphasia. Findings support the clinical use of script training and importance of considering aphasia severity. PMID:24686911

Gym-based exercise was more costly compared with home-based exercise with telephone support when used as maintenance programs for adults with chronic health conditions: cost-effectiveness analysis of a randomised trial.

PubMed

Jansons, Paul; Robins, Lauren; O'Brien, Lisa; Haines, Terry

2018-01-01

What is the comparative cost-effectiveness of a gym-based maintenance exercise program versus a home-based maintenance program with telephone support for adults with chronic health conditions who have previously completed a short-term, supervised group exercise program? A randomised, controlled trial with blinded outcome assessment at baseline and at 3, 6, 9 and 12 months. The economic evaluation took the form of a trial-based, comparative, incremental cost-utility analysis undertaken from a societal perspective with a 12-month time horizon. People with chronic health conditions who had completed a 6-week exercise program at a community health service. One group of participants received a gym-based exercise program and health coaching for 12 months. The other group received a home-based exercise program and health coaching for 12 months with telephone follow-up for the first 10 weeks. Healthcare costs were collected from government databases and participant self-report, productivity costs from self-report, and health utility was measured using the European Quality of Life Instrument (EQ-5D-3L). Of the 105 participants included in this trial, 100 provided sufficient cost and utility measurements to enable inclusion in the economic analyses. Gym-based follow-up would cost an additional AUD491,572 from a societal perspective to gain 1 quality-adjusted life year or 1year gained in perfect health compared with the home-based approach. There was considerable uncertainty in this finding, in that there was a 37% probability that the home-based approach was both less costly and more effective than the gym-based approach. The gym-based approach was more costly than the home-based maintenance intervention with telephone support. The uncertainty of these findings suggests that if either intervention is already established in a community setting, then the other intervention is unlikely to replace it efficiently. ACTRN12610001035011. [Jansons P, Robins L, O'Brien L, Haines T (2018) Gym-based exercise was more costly compared with home-based exercise with telephone support when used as maintenance programs for adults with chronic health conditions: cost-effectiveness analysis of a randomised trial. Journal of Physiotherapy 64: 48-54]. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

A Tailored Ontology Supporting Sensor Implementation for the Maintenance of Industrial Machines

PubMed Central

Belkadi, Farouk; Bernard, Alain

2017-01-01

The longtime productivity of an industrial machine is improved by condition-based maintenance strategies. To do this, the integration of sensors and other cyber-physical devices is necessary in order to capture and analyze a machine’s condition through its lifespan. Thus, choosing the best sensor is a critical step to ensure the efficiency of the maintenance process. Indeed, considering the variety of sensors, and their features and performance, a formal classification of a sensor’s domain knowledge is crucial. This classification facilitates the search for and reuse of solutions during the design of a new maintenance service. Following a Knowledge Management methodology, the paper proposes and develops a new sensor ontology that structures the domain knowledge, covering both theoretical and experimental sensor attributes. An industrial case study is conducted to validate the proposed ontology and to demonstrate its utility as a guideline to ease the search of suitable sensors. Based on the ontology, the final solution will be implemented in a shared repository connected to legacy CAD (computer-aided design) systems. The selection of the best sensor is, firstly, obtained by the matching of application requirements and sensor specifications (that are proposed by this sensor repository). Then, it is refined from the experimentation results. The achieved solution is recorded in the sensor repository for future reuse. As a result, the time and cost of the design process of new condition-based maintenance services is reduced. PMID:28885592

Improved Acquisition for System Sustainment: Multiobjective Tradeoff Analysis for Condition-Based Decision-Making

DTIC Science & Technology

2013-10-21

depend on the quality of allocating resources. This work uses a reliability model of system and environmental covariates incorporating information at...state space. Further, the use of condition variables allows for the direct modeling of maintenance impact with the assumption that a nominal value ... value ), the model in the application of aviation maintenance can provide a useful estimation of reliability at multiple levels. Adjusted survival

Challenges in sensor development for the electric utility industry

NASA Astrophysics Data System (ADS)

Ward, Barry H.

1999-01-01

The electric utility industry is reducing operating costs in order to prepare for deregulation. The reduction in operating cost has meant a reduction in manpower. The ability to utilize remaining maintenance staff more effectively and to stay competitive in a deregulated environment has therefore become critical. In recent years, the industry has moved away from routine or periodic maintenance to predictive or condition based maintenance. This requires the assessment of equipment condition by frequent testing and inspection; a requirement that is incompatible with cost reduction. To overcome this dilemma, industry trends are toward condition monitoring, whereby the health of apparatus is monitored continuously. This requires the installation of sensors hr transducers on power equipment and the data taken forwarded to an intelligent device for further processing. These devices then analyze the data and make evaluations based on parameter levels or trends, in an attempt to predict possible deterioration. This continuous monitoring allows the electric utility to schedule maintenance on an as needed basis. The industry has been faced with many challenges in sensor design. The measurement of physical, chemical and electrical parameters under extreme conditions of electric fields, magnetic fields, temperature, corrosion, etc. is extensive. This paper will give an overview of these challenges and the solutions adopted for apparatus such as power transformers, circuit breakers, boilers, cables, batteries, and rotating machinery.

A methodology for hard/soft information fusion in the condition monitoring of aircraft

NASA Astrophysics Data System (ADS)

Bernardo, Joseph T.

2013-05-01

Condition-based maintenance (CBM) refers to the philosophy of performing maintenance when the need arises, based upon indicators of deterioration in the condition of the machinery. Traditionally, CBM involves equipping machinery with electronic sensors that continuously monitor components and collect data for analysis. The addition of the multisensory capability of human cognitive functions (i.e., sensemaking, problem detection, planning, adaptation, coordination, naturalistic decision making) to traditional CBM may create a fuller picture of machinery condition. Cognitive systems engineering techniques provide an opportunity to utilize a dynamic resource—people acting as soft sensors. The literature is extensive on techniques to fuse data from electronic sensors, but little work exists on fusing data from humans with that from electronic sensors (i.e., hard/soft fusion). The purpose of my research is to explore, observe, investigate, analyze, and evaluate the fusion of pilot and maintainer knowledge, experiences, and sensory perceptions with digital maintenance resources. Hard/soft information fusion has the potential to increase problem detection capability, improve flight safety, and increase mission readiness. This proposed project consists the creation of a methodology that is based upon the Living Laboratories framework, a research methodology that is built upon cognitive engineering principles1. This study performs a critical assessment of concept, which will support development of activities to demonstrate hard/soft information fusion in operationally relevant scenarios of aircraft maintenance. It consists of fieldwork, knowledge elicitation to inform a simulation and a prototype.

Automated System Checkout to Support Predictive Maintenance for the Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Patterson-Hine, Ann; Deb, Somnath; Kulkarni, Deepak; Wang, Yao; Lau, Sonie (Technical Monitor)

1998-01-01

The Propulsion Checkout and Control System (PCCS) is a predictive maintenance software system. The real-time checkout procedures and diagnostics are designed to detect components that need maintenance based on their condition, rather than using more conventional approaches such as scheduled or reliability centered maintenance. Predictive maintenance can reduce turn-around time and cost and increase safety as compared to conventional maintenance approaches. Real-time sensor validation, limit checking, statistical anomaly detection, and failure prediction based on simulation models are employed. Multi-signal models, useful for testability analysis during system design, are used during the operational phase to detect and isolate degraded or failed components. The TEAMS-RT real-time diagnostic engine was developed to utilize the multi-signal models by Qualtech Systems, Inc. Capability of predicting the maintenance condition was successfully demonstrated with a variety of data, from simulation to actual operation on the Integrated Propulsion Technology Demonstrator (IPTD) at Marshall Space Flight Center (MSFC). Playback of IPTD valve actuations for feature recognition updates identified an otherwise undetectable Main Propulsion System 12 inch prevalve degradation. The algorithms were loaded into the Propulsion Checkout and Control System for further development and are the first known application of predictive Integrated Vehicle Health Management to an operational cryogenic testbed. The software performed successfully in real-time, meeting the required performance goal of 1 second cycle time.

AN OPTIMAL MAINTENANCE MANAGEMENT MODEL FOR AIRPORT CONCRETE PAVEMENT

NASA Astrophysics Data System (ADS)

Shimomura, Taizo; Fujimori, Yuji; Kaito, Kiyoyuki; Obama, Kengo; Kobayashi, Kiyoshi

In this paper, an optimal management model is formulated for the performance-based rehabilitation/maintenance contract for airport concrete pavement, whereby two types of life cycle cost risks, i.e., ground consolidation risk and concrete depreciation risk, are explicitly considered. The non-homogenous Markov chain model is formulated to represent the deterioration processes of concrete pavement which are conditional upon the ground consolidation processes. The optimal non-homogenous Markov decision model with multiple types of risk is presented to design the optimal rehabilitation/maintenance plans. And the methodology to revise the optimal rehabilitation/maintenance plans based upon the monitoring data by the Bayesian up-to-dating rules. The validity of the methodology presented in this paper is examined based upon the case studies carried out for the H airport.

Decreasing inventory of a cement factory roller mill parts using reliability centered maintenance method

NASA Astrophysics Data System (ADS)

Witantyo; Rindiyah, Anita

2018-03-01

According to data from maintenance planning and control, it was obtained that highest inventory value is non-routine components. Maintenance components are components which procured based on maintenance activities. The problem happens because there is no synchronization between maintenance activities and the components required. Reliability Centered Maintenance method is used to overcome the problem by reevaluating maintenance activities required components. The case chosen is roller mill system because it has the highest unscheduled downtime record. Components required for each maintenance activities will be determined by its failure distribution, so the number of components needed could be predicted. Moreover, those components will be reclassified from routine component to be non-routine component, so the procurement could be carried out regularly. Based on the conducted analysis, failure happens in almost every maintenance task are classified to become scheduled on condition task, scheduled discard task, schedule restoration task and no schedule maintenance. From 87 used components for maintenance activities are evaluated and there 19 components that experience reclassification from non-routine components to routine components. Then the reliability and need of those components were calculated for one-year operation period. Based on this invention, it is suggested to change all of the components in overhaul activity to increase the reliability of roller mill system. Besides, the inventory system should follow maintenance schedule and the number of required components in maintenance activity so the value of procurement will be decreased and the reliability system will increase.

Maintenance of Mechanical Equipment in Minnesota Schools, 1968 Survey.

ERIC Educational Resources Information Center

Larson, R. E.; Rust, L. W.

Results of a one-year research program to study maintenance procedures for operating mechanical equipment were based on the determination of--(1) the present condition and level of performance of operating mechanical equipment, (2) the problems encountered by school administrators and custodial engineers pertaining to operating mechanical…

A randomized controlled trial of interim methadone maintenance.

PubMed

Schwartz, Robert P; Highfield, David A; Jaffe, Jerome H; Brady, Joseph V; Butler, Carol B; Rouse, Charles O; Callaman, Jason M; O'Grady, Kevin E; Battjes, Robert J

2006-01-01

Effective alternatives to long waiting lists for entry into methadone hydrochloride maintenance treatment are needed to reduce the complications of continuing heroin dependence and to increase methadone treatment entry. To compare the effectiveness of interim methadone maintenance with that of the usual waiting list condition in facilitating methadone treatment entry and reducing heroin and cocaine use and criminal behavior. Randomized, controlled, clinical trial using 2 conditions, with treatment assignment on a 3:2 basis to interim maintenance-waiting list control. A methadone treatment program in Baltimore. A total of 319 individuals meeting the criteria for current heroin dependence and methadone maintenance treatment. Participants were randomly assigned to either interim methadone maintenance, consisting of an individually determined methadone dose and emergency counseling only for up to 120 days, or referral to community-based methadone treatment programs. Entry into comprehensive methadone maintenance therapy at 4 months from baseline; self-reported days of heroin use, cocaine use, and criminal behavior; and number of urine drug test results positive for heroin and cocaine at the follow-up interview conducted at time of entry into comprehensive methadone treatment (or at 4 months from baseline for participants who did not enter regular treatment). Significantly more participants assigned to the interim methadone maintenance condition entered comprehensive methadone maintenance treatment by the 120th day from baseline (75.9%) than those assigned to the waiting list control condition (20.8%) (P<.001). Overall, in the past 30 days at follow-up, interim participants reported significantly fewer days of heroin use (P<.001), had a significant reduction in heroin-positive drug test results (P<.001), reported spending less money on drugs (P<.001), and received less illegal income (P<.02) than the waiting list participants. Interim methadone maintenance results in a substantial increase in the likelihood of entry into comprehensive treatment, and is an effective means of reducing heroin use and criminal behavior among opioid-dependent individuals awaiting entry into a comprehensive methadone treatment program.

Low-Cost Oil Quality Sensor Based on Changes in Complex Permittivity

PubMed Central

Pérez, Angel Torres; Hadfield, Mark

2011-01-01

Real time oil quality monitoring techniques help to protect important industry assets, minimize downtime and reduce maintenance costs. The measurement of a lubricant’s complex permittivity is an effective indicator of the oil degradation process and it can be useful in condition based maintenance (CBM) to select the most adequate oil replacement maintenance schedules. A discussion of the working principles of an oil quality sensor based on a marginal oscillator to monitor the losses of the dielectric at high frequencies (>1 MHz) is presented. An electronic design procedure is covered which results in a low cost, effective and ruggedized sensor implementation suitable for use in harsh environments. PMID:22346666

Distributed decision-making in electric power system transmission maintenance scheduling using multi-agent systems (MAS)

NASA Astrophysics Data System (ADS)

Zhang, Zhong

In this work, motivated by the need to coordinate transmission maintenance scheduling among a multiplicity of self-interested entities in restructured power industry, a distributed decision support framework based on multiagent negotiation systems (MANS) is developed. An innovative risk-based transmission maintenance optimization procedure is introduced. Several models for linking condition monitoring information to the equipment's instantaneous failure probability are presented, which enable quantitative evaluation of the effectiveness of maintenance activities in terms of system cumulative risk reduction. Methodologies of statistical processing, equipment deterioration evaluation and time-dependent failure probability calculation are also described. A novel framework capable of facilitating distributed decision-making through multiagent negotiation is developed. A multiagent negotiation model is developed and illustrated that accounts for uncertainty and enables social rationality. Some issues of multiagent negotiation convergence and scalability are discussed. The relationships between agent-based negotiation and auction systems are also identified. A four-step MAS design methodology for constructing multiagent systems for power system applications is presented. A generic multiagent negotiation system, capable of inter-agent communication and distributed decision support through inter-agent negotiations, is implemented. A multiagent system framework for facilitating the automated integration of condition monitoring information and maintenance scheduling for power transformers is developed. Simulations of multiagent negotiation-based maintenance scheduling among several independent utilities are provided. It is shown to be a viable alternative solution paradigm to the traditional centralized optimization approach in today's deregulated environment. This multiagent system framework not only facilitates the decision-making among competing power system entities, but also provides a tool to use in studying competitive industry relative to monopolistic industry.

A Fuzzy analytical hierarchy process approach in irrigation networks maintenance

NASA Astrophysics Data System (ADS)

Riza Permana, Angga; Rintis Hadiani, Rr.; Syafi'i

2017-11-01

Ponorogo Regency has 440 Irrigation Area with a total area of 17,950 Ha. Due to the limited budget and lack of maintenance cause decreased function on the irrigation. The aim of this study is to make an appropriate system to determine the indices weighted of the rank prioritization criteria for irrigation network maintenance using a fuzzy-based methodology. The criteria that are used such as the physical condition of irrigation networks, area of service, estimated maintenance cost, and efficiency of irrigation water distribution. 26 experts in the field of water resources in the Dinas Pekerjaan Umum were asked to fill out the questionnaire, and the result will be used as a benchmark to determine the rank of irrigation network maintenance priority. The results demonstrate that the physical condition of irrigation networks criterion (W1) = 0,279 has the greatest impact on the assessment process. The area of service (W2) = 0,270, efficiency of irrigation water distribution (W4) = 0,249, and estimated maintenance cost (W3) = 0,202 criteria rank next in effectiveness, respectively. The proposed methodology deals with uncertainty and vague data using triangular fuzzy numbers, and, moreover, it provides a comprehensive decision-making technique to assess maintenance priority on irrigation network.

Knowledge based ranking algorithm for comparative assessment of post-closure care needs of closed landfills.

PubMed

Sizirici, Banu; Tansel, Berrin; Kumar, Vivek

2011-06-01

Post-closure care (PCC) activities at landfills include cap maintenance; water quality monitoring; maintenance and monitoring of the gas collection/control system, leachate collection system, groundwater monitoring wells, and surface water management system; and general site maintenance. The objective of this study was to develop an integrated data and knowledge based decision making tool for preliminary estimation of PCC needs at closed landfills. To develop the decision making tool, 11 categories of parameters were identified as critical areas which could affect future PCC needs. Each category was further analyzed by detailed questions which could be answered with limited data and knowledge about the site, its history, location, and site specific characteristics. Depending on the existing knowledge base, a score was assigned to each question (on a scale 1-10, as 1 being the best and 10 being the worst). Each category was also assigned a weight based on its relative importance on the site conditions and PCC needs. The overall landfill score was obtained from the total weighted sum attained. Based on the overall score, landfill conditions could be categorized as critical, acceptable, or good. Critical condition indicates that the landfill may be a threat to the human health and the environment and necessary steps should be taken. Acceptable condition indicates that the landfill is currently stable and the monitoring should be continued. Good condition indicates that the landfill is stable and the monitoring activities can be reduced in the future. The knowledge base algorithm was applied to two case study landfills for preliminary assessment of PCC performance. Copyright © 2011 Elsevier Ltd. All rights reserved.

Support vector machine in machine condition monitoring and fault diagnosis

NASA Astrophysics Data System (ADS)

Widodo, Achmad; Yang, Bo-Suk

2007-08-01

Recently, the issue of machine condition monitoring and fault diagnosis as a part of maintenance system became global due to the potential advantages to be gained from reduced maintenance costs, improved productivity and increased machine availability. This paper presents a survey of machine condition monitoring and fault diagnosis using support vector machine (SVM). It attempts to summarize and review the recent research and developments of SVM in machine condition monitoring and diagnosis. Numerous methods have been developed based on intelligent systems such as artificial neural network, fuzzy expert system, condition-based reasoning, random forest, etc. However, the use of SVM for machine condition monitoring and fault diagnosis is still rare. SVM has excellent performance in generalization so it can produce high accuracy in classification for machine condition monitoring and diagnosis. Until 2006, the use of SVM in machine condition monitoring and fault diagnosis is tending to develop towards expertise orientation and problem-oriented domain. Finally, the ability to continually change and obtain a novel idea for machine condition monitoring and fault diagnosis using SVM will be future works.

Pavement condition model based on automated pavement distress surveys.

DOT National Transportation Integrated Search

2014-05-01

Many government agencies and private consulting companies must deal with the issue of : pavement maintenance. The ability to maintain an in-service pavement structure in : acceptable condition from structural and functional points of view is related ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katipamula, Srinivas; Gowri, Krishnan; Hernandez, George

This paper describes one such reference process that can be deployed to provide continuous automated conditioned-based maintenance management for buildings that have BIM, a building automation system (BAS) and a computerized maintenance management software (CMMS) systems. The process can be deployed using an open source transactional network platform, VOLTTRON™, designed for distributed sensing and controls and supports both energy efficiency and grid services.

A randomized controlled trial testing an Internet delivered cost-benefit approach to weight loss maintenance.

PubMed

Leahey, Tricia M; Fava, Joseph L; Seiden, Andrew; Fernandes, Denise; Doyle, Caroline; Kent, Kimberly; La Rue, Molly; Mitchell, Marc; Wing, Rena R

2016-11-01

Weight loss maintenance is a significant challenge in obesity treatment. During maintenance the "costs" of adhering to weight management behaviors may outweigh the "benefits." This study examined the efficacy of a novel approach to weight loss maintenance based on modifying the cost-benefit ratio. Individuals who achieved a 5% weight loss (N=75) were randomized to one of three, 10-month maintenance interventions. All interventions were delivered primarily via the Internet. The Standard arm received traditional weight maintenance strategies. To increase benefits, or rewards, for maintenance behaviors, the two cost-benefit intervention conditions received weekly monetary rewards for self-monitoring and social reinforcement via e-coaching. To decrease behavioral costs (boredom) and increase novelty, participants in the cost-benefit conditions also monitored different evidence-based behaviors every two weeks (e.g., Weeks 1 & 2: steps; Week 3 & 4: red foods). The primary difference between the cost-benefit interventions was type of e-coach providing social reinforcement: Professional (CB Pro) or Peer (CB Peer). Study procedures took place in Providence, RI from 2013 to 2014. Retention was 99%. There were significant group differences in weight regain (p=.01). The Standard arm gained 3.5±5.7kg. In contrast, participants in CB Pro and CB Peer lost an additional 1.8±7.0kg and 0.5±6.4kg, respectively. These results suggest that an Internet delivered cost-benefit approach to weight loss maintenance may be effective for long-term weight control. In addition, using peer coaches to provide reinforcement may be a particularly economic alternative to professionals. These data are promising and provide support for a larger, longer trial. Copyright © 2016 Elsevier Inc. All rights reserved.

A randomized controlled trial testing an Internet delivered cost-benefit approach to weight loss maintenance

PubMed Central

Leahey, Tricia M.; Fava, Joseph L.; Seiden, Andrew; Fernandes, Denise; Doyle, Caroline; Kent, Kimberly; La Rue, Molly; Mitchell, Marc; Wing, Rena R.

2016-01-01

Weight loss maintenance is a significant challenge in obesity treatment. During maintenance the “costs” of adhering to weight management behaviors may outweigh the “benefits.” This study examined the efficacy of a novel approach to weight loss maintenance based on modifying the cost-benefit ratio. Individuals who achieved a 5% weight loss (N=75) were randomized to one of three, 10-month maintenance interventions. All interventions were delivered primarily via the Internet. The Standard arm received traditional weight maintenance strategies. To increase benefits, or rewards, for maintenance behaviors, the two cost-benefit intervention conditions received weekly monetary rewards for self-monitoring and social reinforcement via e-coaching. To decrease behavioral costs (boredom) and increase novelty, participants in the cost-benefit conditions also monitored different evidence-based behaviors every two weeks (e.g., Weeks 1 & 2: steps; Week 3 & 4: red foods). The primary difference between the cost-benefit interventions was type of e-coach providing social reinforcement: Professional (CB Pro) or Peer (CB Peer). Study procedures took place in Providence, RI from 2013–2014. Retention was 99%. There were significant group differences in weight regain (p=.01). The Standard arm gained 3.5±5.7kg. In contrast, participants in CB Pro and CB Peer lost an additional 1.8±7.0kg and 0.5±6.4kg, respectively. These results suggest that an Internet delivered cost-benefit approach to weight loss maintenance may be effective for long-term weight control. In addition, using peer coaches to provide reinforcement may be a particularly economic alternative to professionals. These data are promising and provide support for a larger, longer trial. Clinicaltrials.gov Identifier NCT01760486 PMID:27095323

An Aircraft Lifecycle Approach for the Cost-Benefit Analysis of Prognostics and Condition-Based Maintenance-Based on Discrete-Event Simulation

DTIC Science & Technology

2014-10-02

MPD. This manufacturer documentation contains maintenance tasks with specification of intervals and required man-hours that are to be carried out...failures, without consideration of false alarms and missed failures (see also section 4.1.3). The task redundancy rate is the percentage of preventive...Prognostics and Health Management ROI return on investment RUL remaining useful life TCG task code group SB Service Bulletin XML Extensible Markup

Quantified Risk Ranking Model for Condition-Based Risk and Reliability Centered Maintenance

NASA Astrophysics Data System (ADS)

Chattopadhyaya, Pradip Kumar; Basu, Sushil Kumar; Majumdar, Manik Chandra

2017-06-01

In the recent past, risk and reliability centered maintenance (RRCM) framework is introduced with a shift in the methodological focus from reliability and probabilities (expected values) to reliability, uncertainty and risk. In this paper authors explain a novel methodology for risk quantification and ranking the critical items for prioritizing the maintenance actions on the basis of condition-based risk and reliability centered maintenance (CBRRCM). The critical items are identified through criticality analysis of RPN values of items of a system and the maintenance significant precipitating factors (MSPF) of items are evaluated. The criticality of risk is assessed using three risk coefficients. The likelihood risk coefficient treats the probability as a fuzzy number. The abstract risk coefficient deduces risk influenced by uncertainty, sensitivity besides other factors. The third risk coefficient is called hazardous risk coefficient, which is due to anticipated hazards which may occur in the future and the risk is deduced from criteria of consequences on safety, environment, maintenance and economic risks with corresponding cost for consequences. The characteristic values of all the three risk coefficients are obtained with a particular test. With few more tests on the system, the values may change significantly within controlling range of each coefficient, hence `random number simulation' is resorted to obtain one distinctive value for each coefficient. The risk coefficients are statistically added to obtain final risk coefficient of each critical item and then the final rankings of critical items are estimated. The prioritization in ranking of critical items using the developed mathematical model for risk assessment shall be useful in optimization of financial losses and timing of maintenance actions.

Online Condition Monitoring of a Rail Fastening System on High-Speed Railways Based on Wavelet Packet Analysis

PubMed Central

Wei, Jiahong; Liu, Chong; Ren, Tongqun; Liu, Haixia; Zhou, Wenjing

2017-01-01

The rail fastening system is an important part of a high-speed railway track. It is always critical to the operational safety and comfort of railway vehicles. Therefore, the condition detection of the rail fastening system, looseness or absence, is an important task in railway maintenance. However, the vision-based method cannot identify the severity of rail fastener looseness. In this paper, the condition of rail fastening system is monitored based on an automatic and remote-sensing measurement system. Meanwhile, wavelet packet analysis is used to analyze the acceleration signals, based on which two damage indices are developed to locate the damage position and evaluate the severity of rail fasteners looseness, respectively. To verify the effectiveness of the proposed method, an experiment is performed on a high-speed railway experimental platform. The experimental results show that the proposed method is effective to assess the condition of the rail fastening system. The monitoring system significantly reduces the inspection time and increases the efficiency of maintenance management. PMID:28208732

Web-Based Interventions for Weight Loss or Weight Loss Maintenance in Overweight and Obese People: A Systematic Review of Systematic Reviews

PubMed Central

Sorgente, Angela; Manzoni, Gian Mauro; Re, Federica; Simpson, Susan; Perona, Sara; Rossi, Alessandro; Cattivelli, Roberto; Innamorati, Marco; Jackson, Jeffrey B; Castelnuovo, Gianluca

2017-01-01

Background Weight loss is challenging and maintenance of weight loss is problematic. Web-based programs offer good potential for delivery of interventions for weight loss or weight loss maintenance. However, the precise impact of Web-based weight management programs is still unclear. Objective The purpose of this meta-systematic review was to provide a comprehensive summary of the efficacy of Web-based interventions for weight loss and weight loss maintenance. Methods Electronic databases were searched for systematic reviews and meta-analyses that included at least one study investigating the effect of a Web-based intervention on weight loss and/or weight loss maintenance among samples of overweight and/or obese individuals. Twenty identified reviews met the inclusion criteria. The Revised Assessment of Multiple SysTemAtic Reviews (R-AMSTAR) was used to assess methodological quality of reviews. All included reviews were of sufficient methodological quality (R-AMSTAR score ≥22). Key methodological and outcome data were extracted from each review. Results Web-based interventions for both weight loss and weight loss maintenance were more effective than minimal or control conditions. However, when contrasted with comparable non-Web-based interventions, results were less consistent across reviews. Conclusions Overall, the efficacy of weight loss maintenance interventions was stronger than the efficacy of weight loss interventions, but further evidence is needed to more clearly understand the efficacy of both types of Web-based interventions. Trial Registration PROSPERO 2015: CRD42015029377; http://www.crd.york.ac.uk/PROSPERO/display_record.asp? ID=CRD42015029377 (Archived by WebCite at http://www.webcitation.org/6qkSafdCZ) PMID:28652225

Solid Waste Management Units And Areas Of Concern Annual Long-Term Monitoring & Maintenance Report For Calendar Year 2016.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dotson, Patrick Wells; Little, Bonnie Colleen

Long-term controls were maintained at 21 Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) in accordance with the requirements of the “Long-Term Monitoring and Maintenance Plan for SWMUs and AOCs Granted Corrective Action Complete with Controls” in Attachment M of the Resource Conservation and Recovery Act Facility Operating Permit, which took effect February 26, 2015. Maintenance and controls at these SWMUs and AOCs are described and documented in this report. Conditions requiring maintenance or repair activities were not identified for any of the inspected SWMUs or AOCs. Based upon the inspections performed and site conditions observed, the administrativemore » and physical institutional controls in place at the SWMUs and AOCs are effectively providing continued protection of human health and the environment. This report does not present monitoring and maintenance activities for SWMU 76, the Mixed Waste Landfill; those activities adhere to the approved MWL LTMM Plan, Section 4.8.1 requiring a separate annual report which will be submitted to the NMED by June 30, 2017.« less

Integrated 3D bridge-condition visualization (BCV) to facilitate element-based bridge condition rating (EBCR).

DOT National Transportation Integrated Search

2015-11-01

Routine inspection and maintenance records are essential for bridges to function well throughout their intended lifespan. : Although existing bridge management systems are efficient at data storage, it is difficult to conduct comprehensive data : ana...

Summarized Data of Test Space Heating, Ventilation and Air Conditioning Inspections from the Building Assessment Survey and Evaluation Study

EPA Pesticide Factsheets

Information on the characteristics of the heating, ventilation, and air conditioning (HVAC) system(s) in the entire BASE building including types of ventilation, equipment configurations, and operation and maintenance issues

Building Assessment Survey and Evaluation (BASE) Study: Summarized Data - Test Space HVAC Characteristics

EPA Pesticide Factsheets

Information on the characteristics of the heating, ventilation, and air conditioning (HVAC) system(s) in the entire BASE building including types of ventilation, equipment configurations, and operation and maintenance issues

Data-Mining Toolset Developed for Determining Turbine Engine Part Life Consumption

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.

2003-01-01

The current practice in aerospace turbine engine maintenance is to remove components defined as life-limited parts after a fixed time, on the basis of a predetermined number of flight cycles. Under this schedule-based maintenance practice, the worst-case usage scenario is used to determine the usable life of the component. As shown, this practice often requires removing a part before its useful life is fully consumed, thus leading to higher maintenance cost. To address this issue, the NASA Glenn Research Center, in a collaborative effort with Pratt & Whitney, has developed a generic modular toolset that uses data-mining technology to parameterize life usage models for maintenance purposes. The toolset enables a "condition-based" maintenance approach, where parts are removed on the basis of the cumulative history of the severity of operation they have experienced. The toolset uses data-mining technology to tune life-consumption models on the basis of operating and maintenance histories. The flight operating conditions, represented by measured variables within the engine, are correlated with repair records for the engines, generating a relationship between the operating condition of the part and its service life. As shown, with the condition-based maintenance approach, the lifelimited part is in service until its usable life is fully consumed. This approach will lower maintenance costs while maintaining the safety of the propulsion system. The toolset is a modular program that is easily customizable by users. First, appropriate parametric damage accumulation models, which will be functions of engine variables, must be defined. The tool then optimizes the models to match the historical data by computing an effective-cycle metric that reduces the unexplained variability in component life due to each damage mode by accounting for the variability in operational severity. The damage increment due to operating conditions experienced during each flight is used to compute the effective cycles and ultimately the replacement time. Utilities to handle data problems, such as gaps in the flight data records, are included in the toolset. The tool was demonstrated using the first stage, high-pressure turbine blade of the PW4077 engine (Pratt & Whitney, East Hartford, CT). The damage modes considered were thermomechanical fatigue and oxidation/erosion. Each PW4077 engine contains 82 first-stage, high-pressure turbine blades, and data from a fleet of engines were used to tune the life-consumption models. The models took into account not only measured variables within the engine, but also unmeasured variables such as engine health parameters that are affected by degradation of the engine due to aging. The tool proved effective at predicting the average number of blades scrapped over time due to each damage mode, per engine, given the operating history of the engine. The customizable tools are available to interested parties within the aerospace community.

e-Learning Application for Machine Maintenance Process using Iterative Method in XYZ Company

NASA Astrophysics Data System (ADS)

Nurunisa, Suaidah; Kurniawati, Amelia; Pramuditya Soesanto, Rayinda; Yunan Kurnia Septo Hediyanto, Umar

2016-02-01

XYZ Company is a company based on manufacturing part for airplane, one of the machine that is categorized as key facility in the company is Millac 5H6P. As a key facility, the machines should be assured to work well and in peak condition, therefore, maintenance process is needed periodically. From the data gathering, it is known that there are lack of competency from the maintenance staff to maintain different type of machine which is not assigned by the supervisor, this indicate that knowledge which possessed by maintenance staff are uneven. The purpose of this research is to create knowledge-based e-learning application as a realization from externalization process in knowledge transfer process to maintain the machine. The application feature are adjusted for maintenance purpose using e-learning framework for maintenance process, the content of the application support multimedia for learning purpose. QFD is used in this research to understand the needs from user. The application is built using moodle with iterative method for software development cycle and UML Diagram. The result from this research is e-learning application as sharing knowledge media for maintenance staff in the company. From the test, it is known that the application make maintenance staff easy to understand the competencies.

Approach to Achieve High Availability in Critical Infrastructure

DTIC Science & Technology

2015-09-01

possibility of sensing temperature, vibration , noise , lubrication, and corrosion. The basis of condition-based maintenance is an accurate assessment of the... vibration would be a sign of possible issues such as misalignment or excessive wear and tear. Noise monitoring can complement the temperature sensor...Availability of good sensor Maintenance Approach Cooling systems Unobservable failure Vibration sensor TBM/CBM Blast doors Observable failure No TBM

Microelectromechanical Systems; A DoD Dual Use Technology Industrial Assessment.

DTIC Science & Technology

1995-12-01

systems, • embedded sensors and actuators for condition-based maintenance of machines and vehicles, on-demand amplified structural strength in...will transmit temperature, pressure, and number-of- rotations information to a hand-held receiver used by the maintenance and service personnel. This...automobile industry being the major driver for most micro- machined sensors (pressure, acceleration and oxygen). In 1994 model year Projected Growth

Structural health monitoring methodology for aircraft condition-based maintenance

NASA Astrophysics Data System (ADS)

Saniger, Jordi; Reithler, Livier; Guedra-Degeorges, Didier; Takeda, Nobuo; Dupuis, Jean Pierre

2001-06-01

Reducing maintenance costs while keeping a constant level of safety is a major issue for Air Forces and airlines. The long term perspective is to implement condition based maintenance to guarantee a constant safety level while decreasing maintenance costs. On this purpose, the development of a generalized Structural Health Monitoring System (SHMS) is needed. The objective of such a system is to localize the damages and to assess their severity, with enough accuracy to allow low cost corrective actions. The present paper describes a SHMS based on acoustic emission technology. This choice was driven by its reliability and wide use in the aerospace industry. The described SHMS uses a new learning methodology which relies on the generation of artificial acoustic emission events on the structure and an acoustic emission sensor network. The calibrated acoustic emission events picked up by the sensors constitute the knowledge set that the system relies on. With this methodology, the anisotropy of composite structures is taken into account, thus avoiding the major cause of errors of classical localization methods. Moreover, it is adaptive to different structures as it does not rely on any particular model but on measured data. The acquired data is processed and the event's location and corrected amplitude are computed. The methodology has been demonstrated and experimental tests on elementary samples presented a degree of accuracy of 1cm.

Maintenance azacitidine after myeloablative allogeneic hematopoietic cell transplantation for myeloid malignancies.

PubMed

Maples, Kathryn T; Sabo, Roy T; McCarty, John M; Toor, Amir A; Hawks, Kelly G

2018-04-04

Allogeneic hematopoietic cell transplantation (HCT) is a curative option for patients with acute myeloid leukemia (AML) and myelodysplastic syndrome (MDS), but carries a high risk of relapse. This retrospective review evaluates the effectiveness of maintenance azacitidine in high-risk AML and MDS patients to reduce the probability of relapse. Twenty-five patients who received maintenance azacitidine were matched to historical controls in a two-to-one ratio based on diagnosis, donor type, conditioning regimen intensity, and age. Over 90% of patients received myeloablative conditioning. There was no difference in time to hematologic relapse, overall survival, or non-relapse mortality. Maintenance therapy was stopped early in 72% of patients due to graft-versus-host-disease, relapse, infection, and intolerance (13 of 25 patients received less than 4 cycles). There was a trend towards higher toxicity in the azacitidine group. The use of prophylactic azacitidine following myeloablative allogeneic HCT outside a clinical trial cannot be recommended at this time.

Effect of fendiline on the maintenance and expression of methamphetamine-induced conditioned place preference in Sprague-Dawley rats.

PubMed

Voigt, Robin M; Riddle, Jennifer L; Napier, T Celeste

2014-05-01

Fendiline is a GABAB receptor-positive allosteric modulator and L-type Ca²⁺ channel blocker that is safe for human use. Based on these pharmacological properties, fendiline may be useful to disrupt associative memories that can drive relapse to drug use in drug-addicted individuals The current study evaluated the potential of fendiline to inhibit the maintenance and expression of learned associations between methamphetamine (meth) and an environmental context using conditioned place preference (CPP) in rats, to model for the associative learning that occurs during drug abuse by humans Following meth conditioning (1 mg/kg), fendiline (5 mg/kg) was administered at various post-conditioning times to ascertain if there was a temporal window during which fendiline would be effective. Two once-daily injections of fendiline did not influence the maintenance of CPP regardless of the post-conditioning treatment time while 10 once-daily fendiline treatments inhibited CPP maintenance (p < 0.05). Fendiline administered immediately prior to the CPP test inhibited expression of meth-induced CPP in rats with a fendiline treatment history of 10 once-daily injections (p < 0.05) or those that received two injections that corresponded to the last 2 days of the 10-day treatment (p < 0.05). Fendiline did not produce preference or aversion on its own, nor did it alter motivated motor behavior. Maintenance and expression of meth CPP is mitigated by repeated fendiline treatments when administered during the days that precede CPP testing. Reduction in the significance of meth-associated cues can reduce relapse; therefore, fendiline may be of value for addiction therapy in abstinent, meth-addicted humans.

Effect of fendiline on the maintenance and expression of methamphetamine-induced conditioned place preference in Sprague-Dawley rats

PubMed Central

Voigt, Robin M.; Riddle, Jennifer L.; Napier, T. Celeste

2014-01-01

Rationale Fendiline is a GABAB receptor positive allosteric modulator and L-type Ca2+ channel blocker that is safe for human use. Based on these pharmacological properties, fendiline may be useful to disrupt associative memories that can drive relapse to drug use in drug-addicted individuals. Objective The current study evaluated the potential of fendiline to inhibit the maintenance and expression of learned associations between methamphetamine (meth) and an environmental context using conditioned place preference (CPP) in rats, to model for the associative learning that occurs during drug abuse by humans. Methods Following meth conditioning (1mg/kg), fendiline (5mg/kg) was administered at various post-conditioning times to ascertain if there was a temporal window during which fendiline would be effective. Results Two once-daily injections of fendiline did not influence the maintenance of CPP regardless of the post-conditioning treatment time while 10 once-daily fendiline treatments inhibited CPP maintenance (p<0.05). Fendiline administered immediately prior to the CPP test inhibited expression of meth-induced CPP in rats with a fendiline treatment history of 10 once-daily injections (p<0.05) or those that received two injections that corresponded to the last two days of the 10 day treatment (p<0.05). Fendiline did not produce preference or aversion on its own, nor did it alter motivated motor behavior. Conclusion Maintenance and expression of meth CPP is mitigated by repeated fendiline treatments when administered during the days that precede CPP testing. Reduction in the significance of meth-associated cues can reduce relapse; therefore, fendiline may be of value for addiction therapy in abstinent, meth-addicted humans. PMID:24264565

What factors are related to success on conditional release/discharge? Findings from the New Orleans forensic aftercare clinic: 2002-2013.

PubMed

Manguno-Mire, Gina M; Coffman, Kelly L; DeLand, Sarah M; Thompson, John W; Myers, Leann

2014-09-01

The present study investigated the empirically based factors that predicted success on conditional release among a sample of individuals conditionally discharged in Louisiana. Not guilty by reason of insanity acquittees and individuals on conditional release/discharge for incompetency to stand trial were included in the study. Success on conditional release was defined as maintenance of conditional release during the study period. Recidivism (arrest on new charges) and incidents were empirically evaluated. Success on conditional release was maintained in over 70% of individuals. Recidivism was low, with only five arrests on new charges. Success on conditional release was predicted by financial resources, not having a personality disorder, and having fewer total incidents in the program. After controlling for the influence of other variables, having an incident on conditional release was predicted by a substance use diagnosis and being released from jail. Individuals conditionally released from jail showed fewer number of days to first incident (67 vs. 575 days) compared with individuals discharged from the hospital. These data provide support for the successful management of forensic patients in the community via conditional release, although they highlight specific factors that should be considered when developing community-based release programming. Conditional release programs should consider empirical factors in the development of risk assessment and risk management approaches to improve successful maintenance of community-based forensic treatment alternatives. Copyright © 2014 John Wiley & Sons, Ltd.

Ground Vehicle Condition Based Maintenance

DTIC Science & Technology

2010-10-04

Diagnostic Process Map 32 FMEAs Developed : • Diesel Engine • Transmission • Alternators Analysis : • Identify failure modes • Derive design factors and...S&T Initiatives  TARDEC P&D Process Map  Component Testing  ARL CBM Research  AMSAA SDC & Terrain Modeling UNCLASSIFIED 3 CBM+ Overview...UNCLASSIFIED 4 RCM and CBM are core processes for CBM+ System Development • Army Regulation 750-1, 20 Sep 2007, p. 79 - Reliability Centered Maintenance (RCM

A Randomized Clinical Trial of Methadone Maintenance for Prisoners: Prediction of Treatment Entry and Completion in Prison

PubMed Central

GORDON, MICHAEL S.; KINLOCK, TIMOTHY W.; COUVILLION, KATHRYN A.; SCHWARTZ, ROBERT P.; O’GRADY, KEVIN

2014-01-01

The present report is an intent-to-treat analysis involving secondary data drawn from the first randomized clinical trial of prison-initiated methadone in the United States. This study examined predictors of treatment entry and completion in prison. A sample of 211 adult male prerelease inmates with preincarceration heroin dependence were randomly assigned to one of three treatment conditions: counseling only (counseling in prison; n= 70); counseling plus transfer (counseling in prison with transfer to methadone maintenance treatment upon release; n= 70); and counseling plus methadone (methadone maintenance in prison, continued in a community-based methadone maintenance program upon release; n= 71). Entered prison treatment (p <. 01), and completed prison treatment (p< .001) were significantly predicted by the set of 10 explanatory variables and favored the treatment conditions receiving methadone. The present results indicate that individuals who are older in age and have longer prison sentences may have better outcomes than younger individuals with shorter sentences, meaning they are more likely to enter and complete prison-based treatment. Furthermore, implications for the treatment of prisoners with prior heroin dependence and for conducting clinical trials may indicate the importance of examining individual characteristics and the possibility of the examination of patient preference. PMID:25392605

A Randomized Clinical Trial of Methadone Maintenance for Prisoners: Prediction of Treatment Entry and Completion in Prison.

PubMed

Gordon, Michael S; Kinlock, Timothy W; Couvillion, Kathryn A; Schwartz, Robert P; O'Grady, Kevin

2012-05-01

The present report is an intent-to-treat analysis involving secondary data drawn from the first randomized clinical trial of prison-initiated methadone in the United States. This study examined predictors of treatment entry and completion in prison. A sample of 211 adult male prerelease inmates with preincarceration heroin dependence were randomly assigned to one of three treatment conditions: counseling only (counseling in prison; n= 70); counseling plus transfer (counseling in prison with transfer to methadone maintenance treatment upon release; n= 70); and counseling plus methadone (methadone maintenance in prison, continued in a community-based methadone maintenance program upon release; n= 71). Entered prison treatment (p <. 01), and completed prison treatment (p< .001) were significantly predicted by the set of 10 explanatory variables and favored the treatment conditions receiving methadone. The present results indicate that individuals who are older in age and have longer prison sentences may have better outcomes than younger individuals with shorter sentences, meaning they are more likely to enter and complete prison-based treatment. Furthermore, implications for the treatment of prisoners with prior heroin dependence and for conducting clinical trials may indicate the importance of examining individual characteristics and the possibility of the examination of patient preference.

Optimisation of maintenance concept choice using risk-decision factor - a case study

NASA Astrophysics Data System (ADS)

Popovic, Vladimir M.; Vasic, Branko M.; Rakicevic, Branislav B.; Vorotovic, Goran S.

2012-10-01

The design of maintenance system and the corresponding logistic support is a very complex process, during which the aim is to find the compromise solutions regarding the relations among different maintenance procedures and the ways of their implementation. As a result of this, various solutions can be adopted, since this is conditioned by a series of important factors and criteria, which can be contradictory sometimes. There are different perspectives on ways of solving practical maintenance problems, that is dilemmas when it comes to the choice of maintenance concept. The principal dilemma is how and when to decide on carrying out maintenance procedures. Should the decision be based on theoretical grounds or experience, how does one reconcile those two extremes, who is to decide upon this? In this article we have offered one, basically new solution as a possibility for maintenance concept choice, based on a significant modification of the widely used failure modes and effects analysis (FMEA) method. This solution is risk-decision factor (RDF). This is a result of seven parameters (of different importance and weight) that have the key impact on the process of production and logistic support. The application of this factor is illustrated by the example of planning, organisation and functioning of the maintenance system applied in The Institute for Manufacturing Banknotes and Coins (ZIN) in Belgrade.

Technologies for Fire and Damage Control and Condition Based Maintenance

DTIC Science & Technology

2011-12-01

sheathing, thermal and acoustic insulation, furnishing, bedding, mattresses, flooring , and wood fibre (paper and cardboard) and plastic packaging...Condition Based Maintenance”. The project objective was to develop an improved understanding of how materials, sensors and sensor systems choices impact the...ultraviolet spectral sensors and an acoustic sensor. The system also has data fusion software that analyses the sensor input and determines if the input

Generalized random sign and alert delay models for imperfect maintenance.

PubMed

Dijoux, Yann; Gaudoin, Olivier

2014-04-01

This paper considers the modelling of the process of Corrective and condition-based Preventive Maintenance, for complex repairable systems. In order to take into account the dependency between both types of maintenance and the possibility of imperfect maintenance, Generalized Competing Risks models have been introduced in "Doyen and Gaudoin (J Appl Probab 43:825-839, 2006)". In this paper, we study two classes of these models, the Generalized Random Sign and Generalized Alert Delay models. A Generalized Competing Risks model can be built as a generalization of a particular Usual Competing Risks model, either by using a virtual age framework or not. The models properties are studied and their parameterizations are discussed. Finally, simulation results and an application to real data are presented.

[Design of medical equipment service management system].

PubMed

Jiang, Youhao; PengWen; Jiang, Ningfeng; Ma, Li; Kong, Lingwei; Yin, PeiHao; Sun, Cheng

2012-09-01

To develop a maintenance management system for medical equipment based on HIS. The system contains some special functions( including preventive maintenance, automatic job dispatch, performance assessment, etc.) which are very useful for confirming the medical equipment in proper conditions and promoting the working efficiency of the staff. The system provides technical support for the improvement of the maintenance management level. The system, completed the software design using C/S, B/S combination mode. The system realized clients of various sections of zero maintenance, and make the data manipulation, statistical features of equipment management department more convenient. the system connects the subsystems closer and interacts information from time to time, forming a tight network structure. This provides a basis for future hospital-wide information integration.

Application of reliability-centered maintenance to boiling water reactor emergency core cooling systems fault-tree analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Y.A.; Feltus, M.A.

1995-07-01

Reliability-centered maintenance (RCM) methods are applied to boiling water reactor plant-specific emergency core cooling system probabilistic risk assessment (PRA) fault trees. The RCM is a technique that is system function-based, for improving a preventive maintenance (PM) program, which is applied on a component basis. Many PM programs are based on time-directed maintenance tasks, while RCM methods focus on component condition-directed maintenance tasks. Stroke time test data for motor-operated valves (MOVs) are used to address three aspects concerning RCM: (a) to determine if MOV stroke time testing was useful as a condition-directed PM task; (b) to determine and compare the plant-specificmore » MOV failure data from a broad RCM philosophy time period compared with a PM period and, also, compared with generic industry MOV failure data; and (c) to determine the effects and impact of the plant-specific MOV failure data on core damage frequency (CDF) and system unavailabilities for these emergency systems. The MOV stroke time test data from four emergency core cooling systems [i.e., high-pressure coolant injection (HPCI), reactor core isolation cooling (RCIC), low-pressure core spray (LPCS), and residual heat removal/low-pressure coolant injection (RHR/LPCI)] were gathered from Philadelphia Electric Company`s Peach Bottom Atomic Power Station Units 2 and 3 between 1980 and 1992. The analyses showed that MOV stroke time testing was not a predictor for eminent failure and should be considered as a go/no-go test. The failure data from the broad RCM philosophy showed an improvement compared with the PM-period failure rates in the emergency core cooling system MOVs. Also, the plant-specific MOV failure rates for both maintenance philosophies were shown to be lower than the generic industry estimates.« less

A Cost Analysis for Life-Cycle Preventive Maintenance, Administrative Storage, and Condition-Based Maintenance for the U.S. Marine Corps Medium Tactical Vehicle Replacement

DTIC Science & Technology

2013-12-04

Table 3. Monthly PMCS Actions and Labor Required Task Hours Task Hours Inspect cab and hood 1.0 Inspect turbocharger 0.5 Inspect fuel tank 0.1 Inspect...Annual PMCS Actions and Labor Required Task Hours Task Hours Inspect cab and hood 1.0 Air intake system 0.2 Inspect fuel Tank 0.1 Inspect turbocharger

Improving the Repair Planning System for Mining Equipment on the Basis of Non-destructive Evaluation Data

NASA Astrophysics Data System (ADS)

Drygin, Michael; Kuryshkin, Nicholas

2017-11-01

The article tells about forming a new concept of scheduled preventive repair system of the equipment at coal mining enterprises, based on the use of modem non-destructive evaluation methods. The approach to the solution for this task is based on the system-oriented analysis of the regulatory documentation, non-destructive evaluation methods and means, experimental studies with compilation of statistics and subsequent grapho-analytical analysis. The main result of the work is a feasible explanation of using non-destructive evaluation methods within the current scheduled preventive repair system, their high efficiency and the potential of gradual transition to condition-based maintenance. In practice wide use of nondestructive evaluation means w;ill allow to reduce significantly the number of equipment failures and to repair only the nodes in pre-accident condition. Considering the import phase-out policy, the solution for this task will allow to adapt the SPR system to Russian market economy conditions and give the opportunity of commercial move by reducing the expenses for maintenance of Russian-made and imported equipment.

Design considerations and rationale of a multi-center trial to sustain weight loss: the Weight Loss Maintenance Trial.

PubMed

Brantley, Phillip; Appel, Lawrence; Hollis, Jack; Stevens, Victor; Ard, Jamy; Champagne, Catherine; Elmer, Patricia; Harsha, David; Myers, Valerie; Proschan, Michael; William, Vollmer; Svetkey, Laura

2008-01-01

The Weight Loss Maintenance Trial (WLM) is a multi-center, randomized, controlled trial that compares the effects of two 30-month maintenance interventions, i.e., Personal Contact (PC) and Interactive Technology (IT) to a self-directed usual care control group (SD), in overweight or obese individuals who are at high risk for cardiovascular disease. This paper provides an overview of the design and methods, and design considerations and lessons learned from this trial. All participants received a 6-month behavioral weight loss program consisting of weekly group sessions. Participants who lost 4 kg were randomized to one of three conditions (PC, IT, or SD). The PC condition provided monthly contacts with an interventionist primarily via telephone and quarterly face-to-face visits. The IT condition provided frequent, individualized contact through a tailored, website system. Both the PC and IT maintenance programs encouraged the DASH dietary pattern and employed theory-based behavioral techniques to promote maintenance. Design considerations included choice of study population, frequency and type of intervention visits, and choice of primary outcome. Overweight or obese persons with CVD risk factors were studied. The pros and cons of studying this population while excluding others are presented. We studied intervention contact strategies that made fewer demands on participant time and travel, while providing frequent opportunities for interaction. The primary outcome variable for the trial was change in weight from randomization to end of follow-up (30 months). Limits to generalizability are discussed. Individuals in need of weight loss strategies may have been excluded due to barriers associated with internet use. Other participants may have been excluded secondary to a comorbid condition. This paper highlights the design and methods of WLM and informs readers of discussions of critical issues and lessons learned from the trial.

Pavement condition assessment to forecast maintenance program on JKR state roads in Petaling district

NASA Astrophysics Data System (ADS)

Hamsan, R.; Hafiz, H.; Azlan, A.; Keprawi, M. F.; Malik, A. K. A.; Adamuddin, A.; Abdullah, A. H.; Shafie, A. M.

2018-02-01

This research allows local authorities to project road maintenance in term of activities and financial expenditure through pavement condition assessment and then Highway Development and Management (HDM-4) analysis. Current form of road maintenance carried out by local authority is on reactive manner where corrective actions were taken based on reports recorded. Some went unrecorded hence causing prolonged damages. This causes the local authority unable to project the required cost to maintain the roads. This affects the socio-economy of the surrounding routes. Hence, it is seen, as preventive maintenance of the roads will provide more feasible option in term of work force and finance to the local authority. To overcome this issue, a preventive model was introduced. This was done through pavement condition assessment (PCA) where analysis was done through HDM-4. Nondestructive test and destructive test were conducted in order to provide an indicator to the road's health. This were then analyzed in HDM-4 where the result was benchmarked with maintenance standard. The scope of this research is set to PCA where DT and NDT were performed on the routes of Petaling and the output is analyzed in HDM-4. The result of this research provides a 10 years forecast maintenance budget in maintaining the roads in Petaling. This allows the local authority to perform good practice in term of maintaining the roads while at the same time helps them in forecasting their budget for the upcoming years. This research will have a strong impact on the local socio-economy as well as local road user confidence towards the authority over good practices. This research can be further expanded to other type of roads as well as highway bridges.

Resource Optimization Techniques and Security Levels for Wireless Sensor Networks Based on the ARSy Framework.

PubMed

Parenreng, Jumadi Mabe; Kitagawa, Akio

2018-05-17

Wireless Sensor Networks (WSNs) with limited battery, central processing units (CPUs), and memory resources are a widely implemented technology for early warning detection systems. The main advantage of WSNs is their ability to be deployed in areas that are difficult to access by humans. In such areas, regular maintenance may be impossible; therefore, WSN devices must utilize their limited resources to operate for as long as possible, but longer operations require maintenance. One method of maintenance is to apply a resource adaptation policy when a system reaches a critical threshold. This study discusses the application of a security level adaptation model, such as an ARSy Framework, for using resources more efficiently. A single node comprising a Raspberry Pi 3 Model B and a DS18B20 temperature sensor were tested in a laboratory under normal and stressful conditions. The result shows that under normal conditions, the system operates approximately three times longer than under stressful conditions. Maintaining the stability of the resources also enables the security level of a network's data output to stay at a high or medium level.

Resource Optimization Techniques and Security Levels for Wireless Sensor Networks Based on the ARSy Framework

PubMed Central

Kitagawa, Akio

2018-01-01

Wireless Sensor Networks (WSNs) with limited battery, central processing units (CPUs), and memory resources are a widely implemented technology for early warning detection systems. The main advantage of WSNs is their ability to be deployed in areas that are difficult to access by humans. In such areas, regular maintenance may be impossible; therefore, WSN devices must utilize their limited resources to operate for as long as possible, but longer operations require maintenance. One method of maintenance is to apply a resource adaptation policy when a system reaches a critical threshold. This study discusses the application of a security level adaptation model, such as an ARSy Framework, for using resources more efficiently. A single node comprising a Raspberry Pi 3 Model B and a DS18B20 temperature sensor were tested in a laboratory under normal and stressful conditions. The result shows that under normal conditions, the system operates approximately three times longer than under stressful conditions. Maintaining the stability of the resources also enables the security level of a network’s data output to stay at a high or medium level. PMID:29772773

Improving hydraulic excavator performance through in line hydraulic oil contamination monitoring

NASA Astrophysics Data System (ADS)

Ng, Felix; Harding, Jennifer A.; Glass, Jacqueline

2017-01-01

It is common for original equipment manufacturers (OEMs) of high value products to provide maintenance or service packages to customers to ensure their products are maintained at peak efficiency throughout their life. To quickly and efficiently plan for maintenance requirements, OEMs require accurate information about the use and wear of their products. In recent decades, the aerospace industry in particular has become expert in using real time data for the purpose of product monitoring and maintenance scheduling. Significant quantities of real time usage data from product monitoring are commonly generated and transmitted back to the OEMs, where diagnostic and prognostic analysis will be carried out. More recently, other industries such as construction and automotive, are also starting to develop capabilities in these areas and condition based maintenance (CBM) is increasing in popularity as a means of satisfying customers' demands. CBM requires constant monitoring of real time product data by the OEMs, however the biggest challenge for these industries, in particular construction, is the lack of accurate and real time understanding of how their products are being used possibly because of the complex supply chains which exist in construction projects. This research focuses on current dynamic data acquisition techniques for mobile hydraulic systems, in this case the use of a mobile inline particle contamination sensor; the aim was to assess suitability to achieve both diagnostic and prognostic requirements of Condition Based Maintenance. It concludes that hydraulic oil contamination analysis, namely detection of metallic particulates, offers a reliable way to measure real time wear of hydraulic components.

Application of Vibration and Oil Analysis for Reliability Information on Helicopter Main Rotor Gearbox

NASA Astrophysics Data System (ADS)

Murrad, Muhamad; Leong, M. Salman

Based on the experiences of the Malaysian Armed Forces (MAF), failure of the main rotor gearbox (MRGB) was one of the major contributing factors to helicopter breakdowns. Even though vibration and oil analysis are the effective techniques for monitoring the health of helicopter components, these two techniques were rarely combined to form an effective assessment tool in MAF. Results of the oil analysis were often used only for oil changing schedule while assessments of MRGB condition were mainly based on overall vibration readings. A study group was formed and given a mandate to improve the maintenance strategy of S61-A4 helicopter fleet in the MAF. The improvement consisted of a structured approach to the reassessment/redefinition suitable maintenance actions that should be taken for the MRGB. Basic and enhanced tools for condition monitoring (CM) are investigated to address the predominant failures of the MRGB. Quantitative accelerated life testing (QALT) was considered in this work with an intent to obtain the required reliability information in a shorter time with tests under normal stress conditions. These tests when performed correctly can provide valuable information about MRGB performance under normal operating conditions which enable maintenance personnel to make decision more quickly, accurately and economically. The time-to-failure and probability of failure information of the MRGB were generated by applying QALT analysis principles. This study is anticipated to make a dramatic change in its approach to CM, bringing significant savings and various benefits to MAF.

A comprehensive review of arsenic levels in the semiconductor manufacturing industry.

PubMed

Park, Donguk; Yang, Haengsun; Jeong, Jeeyeon; Ha, Kwonchul; Choi, Sangjun; Kim, Chinyon; Yoon, Chungsik; Park, Dooyong; Paek, Domyung

2010-11-01

This paper presents a summary of arsenic level statistics from air and wipe samples taken from studies conducted in fabrication operations. The main objectives of this study were not only to describe arsenic measurement data but also, through a literature review, to categorize fabrication workers in accordance with observed arsenic levels. All airborne arsenic measurements reported were included in the summary statistics for analysis of the measurement data. The arithmetic mean was estimated assuming a lognormal distribution from the geometric mean and the geometric standard deviation or the range. In addition, weighted arithmetic means (WAMs) were calculated based on the number of measurements reported for each mean. Analysis of variance (ANOVA) was employed to compare arsenic levels classified according to several categories such as the year, sampling type, location sampled, operation type, and cleaning technique. Nine papers were found reporting airborne arsenic measurement data from maintenance workers or maintenance areas in semiconductor chip-making plants. A total of 40 statistical summaries from seven articles were identified that represented a total of 423 airborne arsenic measurements. Arsenic exposure levels taken during normal operating activities in implantation operations (WAM = 1.6 μg m⁻³, no. of samples = 77, no. of statistical summaries = 2) were found to be lower than exposure levels of engineers who were involved in maintenance works (7.7 μg m⁻³, no. of samples = 181, no. of statistical summaries = 19). The highest level (WAM = 218.6 μg m⁻³) was associated with various maintenance works performed inside an ion implantation chamber. ANOVA revealed no significant differences in the WAM arsenic levels among the categorizations based on operation and sampling characteristics. Arsenic levels (56.4 μg m⁻³) recorded during maintenance works performed in dry conditions were found to be much higher than those from maintenance works in wet conditions (0.6 μg m⁻³). Arsenic levels from wipe samples in process areas after maintenance activities ranged from non-detectable to 146 μg cm⁻², indicating the potential for dispersion into the air and hence inhalation. We conclude that workers who are regularly or occasionally involved in maintenance work have higher potential for occupational exposure than other employees who are in charge of routine production work. In addition, fabrication workers can be classified into two groups based on the reviewed arsenic exposure levels: operators with potential for low levels of exposure and maintenance engineers with high levels of exposure. These classifications could be used as a basis for a qualitative ordinal ranking of exposure in an epidemiological study.

Estimating cost per lane mile for routine highway operations and maintenance

DOT National Transportation Integrated Search

2011-01-01

The disparity between maintenance budgets and maintenance requirements causes agencies to make difficult choices : about maintenance priorities. There is a growing need to effectively link maintenance costs and condition to provide clear : evidence o...

The Function and Organization of Lateral Prefrontal Cortex: A Test of Competing Hypotheses

PubMed Central

Reynolds, Jeremy R.; O'Reilly, Randall C.; Cohen, Jonathan D.; Braver, Todd S.

2012-01-01

The present experiment tested three hypotheses regarding the function and organization of lateral prefrontal cortex (PFC). The first account (the information cascade hypothesis) suggests that the anterior-posterior organization of lateral PFC is based on the timing with which cue stimuli reduce uncertainty in the action selection process. The second account (the levels-of-abstraction hypothesis) suggests that the anterior-posterior organization of lateral PFC is based on the degree of abstraction of the task goals. The current study began by investigating these two hypotheses, and identified several areas of lateral PFC that were predicted to be active by both the information cascade and levels-of-abstraction accounts. However, the pattern of activation across experimental conditions was inconsistent with both theoretical accounts. Specifically, an anterior area of mid-dorsolateral PFC exhibited sensitivity to experimental conditions that, according to both accounts, should have selectively engaged only posterior areas of PFC. We therefore investigated a third possible account (the adaptive context maintenance hypothesis) that postulates that both posterior and anterior regions of PFC are reliably engaged in task conditions requiring active maintenance of contextual information, with the temporal dynamics of activity in these regions flexibly tracking the duration of maintenance demands. Activity patterns in lateral PFC were consistent with this third hypothesis: regions across lateral PFC exhibited transient activation when contextual information had to be updated and maintained in a trial-by-trial manner, but sustained activation when contextual information had to be maintained over a series of trials. These findings prompt a reconceptualization of current views regarding the anterior-posterior organization of lateral PFC, but do support other findings regarding the active maintenance role of lateral PFC in sequential working memory paradigms. PMID:22355309

Nondestructive pavement evaluation using finite element analysis based soft computing models.

DOT National Transportation Integrated Search

2009-09-15

Evaluating structural condition of existing, in-service pavements constitutes annually a major part of the : maintenance and rehabilitation activities undertaken by State Highway Agencies (SHAs). Accurate : estimation of pavement geometry and layer m...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Thomas

The design features developed for the Spherical Tokamak (ST) in the PPPL pilot plant study was used as the starting point in developing designs to meet the mission of a Fusion Nuclear Science Facility (FNSF) considering a range of machine sizes based on the influence of tritium consumption and maintenance strategies. The compact nature of a steady state operated ST device for this mission pushes operating conditions and places challenges in the design of components, device maintenance and the integration of supports and services. This paper reviews the general arrangement, design details and maintenance strategy of the ST-FNSF device coremore » for a 1.6-m and 1.0-m device; operating points which bracket the region between purchasing and breeding tritium.« less

White Cliffs: Operating Experience

NASA Technical Reports Server (NTRS)

Kaneff, S.

1984-01-01

The fourteen dish white cliffs solar power station area is remote and subject to extreme environmental conditions, solution of the associated problems required careful and thoughtful attention and the application of resources. Notwithstanding the wide range and harshness of conditions, the difficulties caused by remoteness and the lack of a technological base and the need for relatively rapid demonstration of success, the project has had a very positive outcome. Qualitative and quantitative information and lessons are now available to enable considerable simplifications to be made for a new system, reducing both hardware and operation and maintenance costs. Experience and lessons are presented, particularly in relation to: system performance in various environmental conditions; design philosophies for collectors, the array, control systems, engine and plant; operation and maintenance strategies and cost reducing possibilities. Experience so far gives encouragement for the future of such paraboloidal dish systems in appropriate areas.

Impact of oscillations of shafts on machining accuracy using non-stationary machines

NASA Astrophysics Data System (ADS)

Fedorenko, M. A.; Bondarenko, J. A.; Pogonin, A. A.

2018-03-01

The solution of the problem of restoring parts and units of equipment of the large mass and size is possible on the basis of the development of the research base, including the development of models and theoretical relations, revealing complex reasons for causes of damage and equipment failure. This allows one to develop new effective technologies of maintenance and repair, implementation of which ensures the efficiency and durability of the machines. The development of new forms of technical maintenance and repair of equipment, based on a systematic evaluation of its technical condition with the help of modern diagnostic tools can significantly reduce the duration of the downtime.

[Effectiveness of the maintenance operations on the air conditioning systems of a university building in relation to the microbiological quality of the air indoor].

PubMed

De Filippis, Patrizia; Spinaci, Anna; Coia, Maura; Maggi, Oriana; Panà, Augusto

2003-01-01

The microbiological quality of the air indoor is influenced from various factors and one of the most important is represented from the maintenance of the conditioning systems. In this study it has been estimated the effectiveness of an intervention of cleaning and maintenance on the systems of conditioning of an university building executing sampling before and after such intervention. The two results were confronted and it is observed as the maintenance of the air conditioners has influenced on the quality of the air indoor.

Incorporating Equipment Condition Assessment in Risk Monitors for Advanced Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coble, Jamie B.; Coles, Garill A.; Meyer, Ryan M.

2013-10-01

Advanced small modular reactors (aSMRs) can complement the current fleet of large light-water reactors in the USA for baseload and peak demand power production and process heat applications (e.g., water desalination, shale oil extraction, hydrogen production). The day-to-day costs of aSMRs are expected to be dominated by operations and maintenance (O&M); however, the effect of diverse operating missions and unit modularity on O&M is not fully understood. These costs could potentially be reduced by optimized scheduling, with risk-informed scheduling of maintenance, repair, and replacement of equipment. Currently, most nuclear power plants have a “living” probabilistic risk assessment (PRA), which reflectsmore » the as-operated, as-modified plant and combine event probabilities with population-based probability of failure (POF) for key components. “Risk monitors” extend the PRA by incorporating the actual and dynamic plant configuration (equipment availability, operating regime, environmental conditions, etc.) into risk assessment. In fact, PRAs are more integrated into plant management in today’s nuclear power plants than at any other time in the history of nuclear power. However, population-based POF curves are still used to populate fault trees; this approach neglects the time-varying condition of equipment that is relied on during standard and non-standard configurations. Equipment condition monitoring techniques can be used to estimate the component POF. Incorporating this unit-specific estimate of POF in the risk monitor can provide a more accurate estimate of risk in different operating and maintenance configurations. This enhanced risk assessment will be especially important for aSMRs that have advanced component designs, which don’t have an available operating history to draw from, and often use passive design features, which present challenges to PRA. This paper presents the requirements and technical gaps for developing a framework to integrate unit-specific estimates of POF into risk monitors, resulting in enhanced risk monitors that support optimized operation and maintenance of aSMRs.« less

Method and computer program product for maintenance and modernization backlogging

DOEpatents

Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

2013-02-19

According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

The Evaluation of Screening Process and Local Bureaucracy in Determining the Priority of Urban Roads Maintenance and Rehabilitation

NASA Astrophysics Data System (ADS)

Hendhratmoyo, Andri; Syafi'i; Pungky Pramesti, Florentina

2017-11-01

Due to the limited budget of urban roads maintenance and rehabilitation, its prioritizationis inevitable. Many models have been developed to solve these problems. That is the reason why the purpose of this study was to evaluate the screening process in the decision making of the urban roads maintenance and rehabilitation priority. The prioritization that have to be taken into account on the effect of important criteria are road condition, traffic volume, budget processing and land use. 30 stakeholders were asked to fill in the questionnaires. The object of this case study are 188 urban roads sections at Ponorogo in order to examine the priorities. The researchers collected the data from Surface Distress Index (SDI), traffic volume, budget processing and land use of these road sections. Based on analysis, the weights of the criteria were: road condition (W1) = 0,411; traffic volume (W2) = 0,122; budget processing (W3) = 0,363 and land use (W4) = 0,105. The result of this study by the comparison of the index values of the alternatives priorities, Nyi Ageng Serang Street, was revealed to have the highest priority over the other streets regarding of maintenance and rehabilitation activities.

Florida maintenance rating program (MRP) assessment and enhancement : final report, May 28, 2008.

DOT National Transportation Integrated Search

2008-05-28

The Maintenance Rating Program (MRP), developed in 1985 by FDOT, is a statewide maintenance system aimed : at evaluating the State highway maintenance conditions, and determining FDOT asset maintenance needs. In the : quest for continuous improvement...

On the maintenance of sex chromosome polymorphism by sex-antagonistic selection.

PubMed

Blaser, Olivier; Neuenschwander, Samuel; Perrin, Nicolas

2011-10-01

Complex sex determination systems are a priori unstable and require specific selective forces for their maintenance. Analytical derivations suggest that sex antagonistic selection may play such a role, but this assumes absence of recombination between the sex-determining and sex-antagonistic genes. Using individual-based simulations and focusing on the sex chromosome and coloration polymorphisms of platy fishes as a case study, we show that the conditions for polymorphism maintenance induce female biases in primary sex ratios, so that sex ratio selection makes the system collapse toward male or female heterogamety as soon as recombinant genotypes appear. However, a polymorphism can still be maintained under scenarios comprising strong sexual selection against dull males, mild natural selection against bright females, and low recombination rates. Though such conditions are plausibly met in natural populations of fishes harboring such polymorphisms, quantitative empirical evaluations are required to properly test whether sex antagonistic selection is a causal agent or whether other selective processes are required (such as local mate competition favoring female-biased sex ratios).

Cross-Polarization Optical Coherence Tomography with Active Maintenance of the Circular Polarization of a Sounding Wave in a Common Path System

NASA Astrophysics Data System (ADS)

Gelikonov, V. M.; Romashov, V. N.; Shabanov, D. V.; Ksenofontov, S. Yu.; Terpelov, D. A.; Shilyagin, P. A.; Gelikonov, G. V.; Vitkin, I. A.

2018-05-01

We consider a cross-polarization optical coherence tomography system with a common path for the sounding and reference waves and active maintenance of the circular polarization of a sounding wave. The system is based on the formation of birefringent characteristics of the total optical path, which are equivalent to a quarter-wave plate with a 45° orientation of its optical axes with respect to the linearly polarized reference wave. Conditions under which any light-polarization state can be obtained using a two-element phase controller are obtained. The dependence of the local cross-scattering coefficient of light in a model medium and biological tissue on the sounding-wave polarization state is demonstrated. The necessity of active maintenance of the circular polarization of a sounding wave in this common path system (including a flexible probe) is shown to realize uniform optimal conditions for cross-polarization studies of biological tissue.

The Resist Diabetes trial: Rationale, design, and methods of a hybrid efficacy/effectiveness intervention trial for resistance training maintenance to improve glucose homeostasis in older prediabetic adults

PubMed Central

Marinik, Elaina L.; Kelleher, Sarah; Savla, Jyoti; Winett, Richard A.; Davy, Brenda M.

2014-01-01

Advancing age is associated with reduced levels of physical activity, increased body weight and fat, decreased lean body mass, and a high prevalence of type 2 diabetes (T2D). Resistance training (RT) increases muscle strength and lean body mass, and reduces risk of T2D among older adults. The Resist Diabetes trial will determine if a social cognitive theory (SCT)-based intervention improves RT maintenance in older, prediabetic adults, using a hybrid efficacy/effectiveness approach. Sedentary, overweight/obese (BMI 25-39.9 kg/m2) adults aged 50-69 (N=170) with prediabetes (impaired fasting glucose and/or impaired glucose tolerance) completed a supervised 3-month RT (2x/wk) Initiation Phase and were then randomly assigned (n=159; 94% retention) to one of two 6-month maintenance conditions: SCT or Standard care. The SCT intervention consisted of faded contacts compared to Standard care. Participants continue RT at an approved, self-selected community facility during maintenance. A subsequent 6-month period involves no contact for both conditions. Assessments occur at baseline and months 3 (post-initiation), 9 (post-intervention), and 15 (six months after no contact). Primary outcomes are prediabetes indices (i.e., impaired fasting and 2-hour glucose concentration) and strength. Secondary measures include insulin sensitivity, beta-cell responsiveness, and disposition index (oral glucose and C-peptide minimal model); adherence; body composition; and SCT measures. Resist Diabetes is the first trial to examine the effectiveness of a high fidelity SCT-based intervention for maintaining RT in older adults with prediabetes to improve glucose homeostasis. Successful application of SCT constructs for RT maintenance may support translation of our RT program for diabetes prevention into community settings. PMID:24252311

Smart aircraft fastener evaluation (SAFE) system: a condition-based corrosion detection system for aging aircraft

NASA Astrophysics Data System (ADS)

Schoess, Jeffrey N.; Seifert, Greg; Paul, Clare A.

1996-05-01

The smart aircraft fastener evaluation (SAFE) system is an advanced structural health monitoring effort to detect and characterize corrosion in hidden and inaccessible locations of aircraft structures. Hidden corrosion is the number one logistics problem for the U.S. Air Force, with an estimated maintenance cost of $700M per year in 1990 dollars. The SAFE system incorporates a solid-state electrochemical microsensor and smart sensor electronics in the body of a Hi-Lok aircraft fastener to process and autonomously report corrosion status to aircraft maintenance personnel. The long-term payoff for using SAFE technology will be in predictive maintenance for aging aircraft and rotorcraft systems, fugitive emissions applications such as control valves, chemical pipeline vessels, and industrial boilers. Predictive maintenance capability, service, and repair will replace the current practice of scheduled maintenance to substantially reduce operational costs. A summary of the SAFE concept, laboratory test results, and future field test plans is presented.

Evaluation of Road Performance Based on International Roughness Index and Falling Weight Deflectometer

NASA Astrophysics Data System (ADS)

Hasanuddin; Setyawan, A.; Yulianto, B.

2018-03-01

Assessment to the performance of road pavement is deemed necessary to improve the management quality of road maintenance and rehabilitation. This research to evaluate the road base on functional and structural and recommendations handling done. Assessing the pavement performance is conducted with functional and structural evaluation. Functional evaluation of pavement is based on the value of IRI (International Roughness Index) which among others is derived from reading NAASRA for analysis and recommended road handling. Meanwhile, structural evaluation of pavement is done by analyzing deflection value based on FWD (Falling Weight Deflectometer) data resulting in SN (Structural Number) value. The analysis will result in SN eff (Structural Number Effective) and SN f (Structural Number Future) value obtained from comparing SN eff to SN f value that leads to SCI (Structural Condition Index) value. SCI value implies the possible recommendation for handling pavement. The study done to Simpang Tuan-Batas Kota Jambi road segment was based on functional analysis. The study indicated that the road segment split into 12 segments in which segment 1, 3, 5, 7, 9, and 11 were of regular maintenance, segment 2, 4, 8, 10, 12 belonged to periodic maintenance, and segment 6 was of rehabilitation. The structural analysis resulted in 8 segments consisting of segment 1 and 2 recommended for regular maintenance, segment 3, 4, 5, and 7 for functional overlay, and 6 and 8 were of structural overlay.

Vibration-based structural health monitoring of highway bridges.

DOT National Transportation Integrated Search

2008-12-01

In recent years, the condition of aging transportation infrastructure has drawn attention to the maintenance and : inspection of highway bridges. With the increasing importance of life-lines, such as highways, to the national economy : and the well-b...

Design of overlays based on pavement condition, roughness, and deflections : part 1 : tentative method for overlay design based on visual pavement distress.

DOT National Transportation Integrated Search

1978-01-01

Data collected on 111 interstate highway projects in Virginia were analyzed by multi-regression analysis and the rating coefficient for each type of distress determined. By this means, the total pavement distress and, hence, the maintenance rating of...

[The formation of the self-maintenance skills in the pre-school children presenting with locomotor and coordination disorders].

PubMed

Poletaeva-Dubrovina, N A; Burkova, A M

2016-01-01

The Ministry of Health of the Russian Federation acknowledges the sharp rise in the prevalence of congenital malformation in this country during the past 30 years. In 2010-2011, this pathology was estimated to occur in 3% of the children. It includes a variety of locomotor and coordination disorders of which the most widespread are infantile cerebral paralysis, ataxia, consequences of perinatal lesions of the central nervous system, etc. This article contains a detailed description of these locomotor and coordination disorders. The objective of the present work was to elaborate and evaluate the program for the formation of the self-maintenance skills in the pre-school children presenting with locomotor and coordination disorders under conditions of family guidance and education. The study was carried out from September 2013 till May 2014 based at MUP DOD "Semeiny klub Nadezhda" ("The Hope Family Club", Municipal unitary facility for children's additional education) and supported by B.N. El'tsin Ural Federal University. It included 10 children suffering from locomotor and coordination disorders of different severity and members of their families. The following methods were used: the self-service skills scorecard , monitoring formation of the motor skills, and Wilcoxon's T-test. The use of the program based on the cooperation with the children's families allowed to achieve positive dynamics in the patients' conditions. Moreover, 30% of them acquired the full scope of the self-maintenance skills. The most pronounced changes in the motor abilities were apparent in the movements of the upper and lower extremitis, walking, and motion in space. The proposed program for the formation of the self-maintenance skills in the pre-school children presenting with locomotor and coordination disorders proved to be highly efficacious. The study has demonstrated the importance of the parents' involvement in the process of formation of the self-maintenance skills and motor abilities. It is concluded that the formation of the self-maintenance skills and locomotor abilities are two interdependent processes.

Engine condition monitoring: CF6 family 60's through the 80's

NASA Technical Reports Server (NTRS)

Kent, H. J.; Dienger, G.

1981-01-01

The on condition program is described in terms of its effectiveness as a maintenance tool both at the line station as well as at home base by the early detection of engine faults, erroneous instrumentation signals and by verification of engine health. The system encompasses all known methods from manual procedures to the fully automated airborne integrated data system.

Travel Information, Transportation & Public Facilities, State of Alaska

Science.gov Websites

outside site Report Potholes Road Conditions (511) Road Maintenance Central Region Maintenance & ; Operations Northern Region Maintenance & Operations Southcoast Region Maintenance & Operations Road Weather Information System Street Sweeping - Anchorage & Eagle River Winter Road Maintenance Priority

Best practices and performance assessment for preventive maintenance treatments for Virginia pavements.

DOT National Transportation Integrated Search

2015-08-01

Preventive maintenance has the potential to improve network condition by retarding future pavement deterioration. This : report outlines guidelines for implementing a preventive maintenance policy for bituminous pavements. : Preventive maintenance tr...

Survey of transit bus maintenance programs in Virginia.

DOT National Transportation Integrated Search

1981-01-01

Transit bus maintenance practices as used by thirteen small and medium-sized transit systems in Virginia were cataloged. Different approaches to maintenance were investigated and the current condition of transit bus maintenance was determined. Factor...

For whom does it work? moderators of outcome on the effect of a transdiagnostic internet-based maintenance treatment after inpatient psychotherapy: randomized controlled trial.

PubMed

Ebert, David Daniel; Gollwitzer, Mario; Riper, Heleen; Cuijpers, Pim; Baumeister, Harald; Berking, Matthias

2013-10-10

Recent studies provide evidence for the effectiveness of Internet-based maintenance treatments for mental disorders. However, it is still unclear which participants might or might not profit from this particular kind of treatment delivery. The study aimed to identify moderators of treatment outcome in a transdiagnostic Internet-based maintenance treatment (TIMT) offered to patients after inpatient psychotherapy for mental disorders in routine care. Using data from a randomized controlled trial (N=400) designed to test the effectiveness of TIMT, we performed secondary analyses to identify factors moderating the effects of TIMT (intervention) when compared with those of a treatment-as-usual control condition. TIMT involved an online self-management module, asynchronous patient-therapist communication, a peer support group, and online-based progress monitoring. Participants in the control condition had unstructured access to outpatient psychotherapy, standardized outpatient face-to-face continuation treatment, and psychotropic management. Self-reports of psychopathological symptoms and potential moderators were assessed at the start of inpatient treatment (T1), at discharge from inpatient treatment/start of TIMT (T2), and at 3-month (T3) and 12-month follow-up (T4). Education level, positive outcome expectations, and diagnoses significantly moderated intervention versus control differences regarding changes in outcomes between T2 and T3. Only education level moderated change differences between T2 and T4. The effectiveness of the intervention (vs control) was more pronounced among participants with a low (vs high) education level (T2-T3: B=-0.32, SE 0.16, P=.049; T2-T4: B=-0.42, SE 0.21, P=.049), participants with high (vs low) positive outcome expectations (T2-T3: B=-0.12, SE 0.05, P=.02) and participants with anxiety disorder (vs mood disorder) (T2-T3: B=-0.43, SE 0.21, P=.04). Simple slope analyses revealed that despite some subgroups benefiting less from the intervention than others, all subgroups still benefited significantly. This transdiagnostic Internet-based maintenance treatment might be suitable for a wide range of participants differing in various clinical, motivational, and demographic characteristics. The treatment is especially effective for participants with low education levels. These findings may generalize to other Internet-based maintenance treatments.

Developing RCM Strategy for Hydrogen Fuel Cells Utilizing On Line E-Condition Monitoring

NASA Astrophysics Data System (ADS)

Baglee, D.; Knowles, M. J.

2012-05-01

Fuel cell vehicles are considered to be a viable solution to problems such as carbon emissions and fuel shortages for road transport. Proton Exchange Membrane (PEM) Fuel Cells are mainly used in this purpose because they can run at low temperatures and have a simple structure. Yet high maintenance costs and the inherent dangers of maintaining equipment using hydrogen are two main issues which need to be addressed. The development of appropriate and efficient strategies is currently lacking with regard to fuel cell maintenance. A Reliability Centered Maintenance (RCM) approach offers considerable benefit to the management of fuel cell maintenance since it includes an identification and consideration of the impact of critical components. Technological developments in e-maintenance systems, radio-frequency identification (RFID) and personal digital assistants (PDAs) have proven to satisfy the increasing demand for improved reliability, efficiency and safety. RFID technology is used to store and remotely retrieve electronic maintenance data in order to provide instant access to up-to-date, accurate and detailed information. The aim is to support fuel cell maintenance decisions by developing and applying a blend of leading-edge communications and sensor technology including RFID. The purpose of this paper is to review and present the state of the art in fuel cell condition monitoring and maintenance utilizing RCM and RFID technologies. Using an RCM analysis critical components and fault modes are identified. RFID tags are used to store the critical information, possible faults and their cause and effect. The relationship between causes, faults, symptoms and long term implications of fault conditions are summarized. Finally conclusions are drawn regarding suggested maintenance strategies and the optimal structure for an integrated, cost effective condition monitoring and maintenance management system.

Social facilitation maintenance treatment for adults with obesity: study protocol for a randomised-controlled feasibility study (SFM study).

PubMed

Hilbert, Anja

2016-08-31

The long-term success of non-surgical weight loss treatment in adults with obesity is limited by substantial relapse, and only a few evidence-based weight loss maintenance treatments exist. This clinical trial investigates the feasibility and efficacy of a social facilitation maintenance programme for weight loss maintenance, tailored to meet the needs of obese adults who have undergone a lifestyle weight loss intervention. In a single-centre, open feasibility trial, 72 adults currently or previously obese or overweight who have undergone a lifestyle weight loss intervention are centrally randomised to 4 months of social facilitation maintenance treatment or treatment as a usual control condition. In 16 outpatient group sessions, the social facilitation maintenance treatment, based on a socioecological model and on evidence supporting social facilitation as a key process in maintaining weight loss, focuses on promoting interpersonal relationships to build up a healthy lifestyle for long-term weight loss maintenance. Primary outcome is the amount of weight regain at 6-month follow-up, compared with pre-treatment weight, derived from measured body weight. Secondary outcomes address feasibility, including recruitment, attrition, assessment non-completion, compliance and patients' programme evaluation; and in comparison with pre-weight loss maintenance, social and interpersonal functioning, eating behaviour and physical activity, psychological and physical symptoms, body composition and risk of comorbidity, and quality of life at post-treatment and follow-up assessments. The study was approved by the Ethical Committee at the University of Leipzig (165-13-15072013). The study results will be disseminated through peer-reviewed publications. DRKS00005182. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Florida maintenance rating program (MRP) assessment and enhancement : final report, May 28, 2008 [summary].

DOT National Transportation Integrated Search

2008-01-01

The Florida Department of Transportation : (FDOT) has used its maintenance rating : program (MRP) to evaluate the states : highway maintenance conditions and : determine asset maintenance needs since : 1985. Periodic evaluation of the program is :...

Value centric approaches to the design, operations and maintenance of wind turbines

NASA Astrophysics Data System (ADS)

Khadabadi, Madhur Aravind

Wind turbine maintenance is emerging as an unexpectedly high component of turbine operating cost, and there is an increasing interest in managing this cost. This thesis presents an alternative view of maintenance as a value-driver, and develops an optimization algorithm to evaluate the value delivered by different maintenance techniques. I view maintenance as an operation that moves the turbine to an improved state in which it can generate more power and, thus, earn more revenue. To implement this approach, I model the stochastic deterioration of the turbine in two dimensions: the deterioration rate, and the extent of deterioration, and then use maintenance to improve the state of the turbine. The value of the turbine is the difference between the revenue from to the power generation and the costs incurred in operation and maintenance. With a focus on blade deterioration, I evaluate the value delivered by implementing two different maintenance schemes, predictive maintenance and scheduled maintenance. An example of predictive maintenance technique is the use of Condition Monitoring Systems to precisely detect deterioration. I model Condition Monitoring System (CMS) of different degrees of fidelity, where a higher fidelity CMS would allow the blade state to be determined with a higher precision. The same model is then applied for the scheduled maintenance technique. The improved state information obtained from these techniques is then used to derive an optimal maintenance strategy. The difference between the value of the turbine with and without the inspection type can be interpreted as the value of the inspection. The results indicate that a higher fidelity (and more expensive) inspection method does not necessarily yield the highest value, and, that there is an optimal level of fidelity that results in maximum value. The results also aim to inform the operator of the impact of regional parameters such as wind speed, variance and maintenance costs to the optimal maintenance strategy. The contributions of this work are twofold. First, I present a practical approach to wind turbine valuation that takes operating and market conditions into account. This work should therefore be useful to wind farm operators, investors and decision makers. Second, I show how the value of a maintenance scheme can be explicitly assessed for different conditions.

Crowding Effects on the Formation and Maintenance of Nuclear Bodies: Insights from Molecular-Dynamics Simulations of Simple Spherical Model Particles

PubMed Central

Cho, Eun Jin; Kim, Jun Soo

2012-01-01

The physics of structure formation and maintenance of nuclear bodies (NBs), such as nucleoli, Cajal bodies, promyelocytic leukemia bodies, and speckles, in a crowded nuclear environment remains largely unknown. We investigate the role of macromolecular crowding in the formation and maintenance of NBs using computer simulations of a simple spherical model, called Lennard-Jones (LJ) particles. LJ particles form a one-phase, dilute fluid when the intermolecular interaction is weaker than a critical value, above which they phase separate and form a condensed domain. We find that when volume-exclusive crowders exist in significant concentrations, domain formation is induced even for weaker intermolecular interactions, and the effect is more pronounced with increasing crowder concentration. Simulation results show that a previous experimental finding that promyelocytic leukemia bodies disappear in the less-crowded condition and reassemble in the normal crowded condition can be interpreted as a consequence of the increased intermolecular interactions between NB proteins due to crowding. Based on further analysis of the simulation results, we discuss the acceleration of macromolecular associations that occur within NBs, and the delay of diffusive transport of macromolecules within and out of NBs when the crowder concentration increases. This study suggests that in a polydisperse nuclear environment that is enriched with a variety of macromolecules, macromolecular crowding not only plays an important role in the formation and maintenance of NBs, but also may perform some regulatory functions in response to alterations in the crowding conditions. PMID:22947858

An Iterative Approach for the Optimization of Pavement Maintenance Management at the Network Level

PubMed Central

Torres-Machí, Cristina; Chamorro, Alondra; Videla, Carlos; Yepes, Víctor

2014-01-01

Pavement maintenance is one of the major issues of public agencies. Insufficient investment or inefficient maintenance strategies lead to high economic expenses in the long term. Under budgetary restrictions, the optimal allocation of resources becomes a crucial aspect. Two traditional approaches (sequential and holistic) and four classes of optimization methods (selection based on ranking, mathematical optimization, near optimization, and other methods) have been applied to solve this problem. They vary in the number of alternatives considered and how the selection process is performed. Therefore, a previous understanding of the problem is mandatory to identify the most suitable approach and method for a particular network. This study aims to assist highway agencies, researchers, and practitioners on when and how to apply available methods based on a comparative analysis of the current state of the practice. Holistic approach tackles the problem considering the overall network condition, while the sequential approach is easier to implement and understand, but may lead to solutions far from optimal. Scenarios defining the suitability of these approaches are defined. Finally, an iterative approach gathering the advantages of traditional approaches is proposed and applied in a case study. The proposed approach considers the overall network condition in a simpler and more intuitive manner than the holistic approach. PMID:24741352

An iterative approach for the optimization of pavement maintenance management at the network level.

PubMed

Torres-Machí, Cristina; Chamorro, Alondra; Videla, Carlos; Pellicer, Eugenio; Yepes, Víctor

2014-01-01

Pavement maintenance is one of the major issues of public agencies. Insufficient investment or inefficient maintenance strategies lead to high economic expenses in the long term. Under budgetary restrictions, the optimal allocation of resources becomes a crucial aspect. Two traditional approaches (sequential and holistic) and four classes of optimization methods (selection based on ranking, mathematical optimization, near optimization, and other methods) have been applied to solve this problem. They vary in the number of alternatives considered and how the selection process is performed. Therefore, a previous understanding of the problem is mandatory to identify the most suitable approach and method for a particular network. This study aims to assist highway agencies, researchers, and practitioners on when and how to apply available methods based on a comparative analysis of the current state of the practice. Holistic approach tackles the problem considering the overall network condition, while the sequential approach is easier to implement and understand, but may lead to solutions far from optimal. Scenarios defining the suitability of these approaches are defined. Finally, an iterative approach gathering the advantages of traditional approaches is proposed and applied in a case study. The proposed approach considers the overall network condition in a simpler and more intuitive manner than the holistic approach.

Mount St. Helens, Washington Feasibility Report & Environmental Impact Statement. Volume 1: Main Report

DTIC Science & Technology

1984-12-01

Base Condition WITH-PROJECT CONDITION Single Retention Structure Identification of NED Plan Benefits - NED Plan SENSITIVITY OF NED PLAN TO...Downstream Actions COSTS OF THE PREFERRED PLAN BENEFITS OF THE PREFERRED PLAN Economic and Social Effects Prevention of Erosion Maintenance of...continued) TABLES Residual Damages Summary of Costs Preferred Alternative Sediment MOvement Net Average Annual NED Benefits Total Flood Damages Average

Pikalert(R) System Vehicle Data Translator (VDT) Utilizing Integrated Mobile Observations Pikalert VDT Enhancements, Operations, & Maintenance

DOT National Transportation Integrated Search

2017-03-24

The Pikalert System provides high precision road weather guidance. It assesses current weather and road conditions based on observations from connected vehicles, road weather information stations, radar, and weather model analysis fields. It also for...

Prognostics and Health Management of Wind Turbines -- Current Status and Future Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

The global wind industry has seen tremendous growth during the past two decades. However, the industry is challenged by premature component failures, which lead to increased turbine downtime and subsequently, cost of energy for wind power. To mitigate the impacts from these failures, the wind industry has been exploring various areas for improvements ranging from product design, new materials or lubricants, to operation and maintenance (O&M) practices. Condition-based maintenance or prognostics and health management (PHM) has been explored as one enabling technology for improving O&M practices. This chapter provides a brief overview of wind turbine PHM with a focus onmore » operational data mining and condition monitoring of drivetrains. Some future research and development opportunities in wind turbine PHM are also briefly discussed.« less

Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.

NASA Astrophysics Data System (ADS)

Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan

2017-09-01

Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.

Condition-Based Conveyor Belt Replacement Strategy in Lignite Mines with Random Belt Deterioration

NASA Astrophysics Data System (ADS)

Blazej, Ryszard; Jurdziak, Leszek

2017-12-01

In Polish lignite surface mines, condition-based belt replacement strategies are applied in order to assure profitable refurbishment of worn out belts performed by external firms specializing in belt maintenance. In two of three lignite mines, staff asses belt condition subjectively during visual inspections. Only one mine applies specialized diagnostic device (HRDS) allowing objective magnetic evaluation of belt core condition in order to choose the most profitable moment for the dismantling of worn out belt segments from conveyors and sending them to the maintenance firm which provides their refurbishment. This article describes the advantages of a new diagnostic device called DiagBelt. It was developed at the Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology. Economic gains from its application are calculated for the lignite mine and for the belt maintenance firm, taking into account random life (durability) of new and reconditioned belts (after the 1st and the 2nd refurbishment). Recursive calculations for following years allow the estimation of the length and costs of replaced, reconditioned and purchased belts on an annual basis, while the use of the Monte Carlo method allows the estimation of their variability caused by random deterioration of belts. Savings are obtained due to better selection of moments (times) for the replacement of belt segments and die to the possibility to qualify worn out belts for refurbishment without the need to remove their covers. In effect, increased belt durability and lowered share of waste belts (which were not qualified for reconditioning) create savings which can quickly cover expenditures on new diagnostic tools and regular belt inspections in the mine.

Reproduction alters oxidative status when it is traded-off against longevity.

PubMed

Beaulieu, Michaël; Geiger, Rina E; Reim, Elisabeth; Zielke, Luisa; Fischer, Klaus

2015-07-01

Oxidative stress has been proposed to mediate one of the most important aspects of life-history evolution: the trade-off between reproduction and self-maintenance. However, empirical studies have cast doubt on the generality of this intriguing notion. Here, we hypothesize that reproduction alters oxidative status only when a trade-off between reproduction and self-maintenance occurs. Accordingly, in female Bicyclus anynana butterflies, we found that reproduction affected oxidative markers only under challenging thermal conditions that made the trade-off between reproduction and longevity emerge. Interestingly, under such conditions, butterflies favored longevity over reproduction, suggesting that self-maintenance mechanisms were activated. Accordingly, butterflies reproducing under challenging thermal conditions exhibited enhanced antioxidant defenses and stable oxidative damage. Altogether, our results indicate that a trade-off between reproduction and self-maintenance is indeed a necessary condition for reproduction to alter oxidative status, and that the effects of such a trade-off on oxidative status depend on whether priority is given to self-maintenance or reproduction. Assessing the existence of the trade-off between self-maintenance and reproduction, and whether self-maintenance is prioritized relative to reproduction is therefore crucial for understanding variation in oxidative status in reproducing animals, which may clarify the general implication of oxidative stress in the resolution of life-history trade-offs. © 2015 The Author(s). Evolution © 2015 The Society for the Study of Evolution.

PREVENTIVE MAINTENANCE. HONEYWELL PLANNING GUIDE.

ERIC Educational Resources Information Center

Honeywell, Inc., Minneapolis, Minn.

THIS HONEYWELL PAMPHLET DISCUSSES SOME ASPECTS OF PREVENTIVE MAINTENANCE OF AUTOMATIC CONTROLS, HEATING, VENTILATING, AND AIR CONDITIONING, AND COMPARES IN-PLANT WITH CONTRACT SERVICE, CONCLUDING THAT CONTRACT SERVICE IS PREFERABLE AND DESCRIBING A NUMBER OF MAINTENANCE PLANS WHICH THEY FURNISH. PREVENTIVE MAINTENANCE PROVIDES--(1) MORE EFFICIENT…

Aggregation of Electric Current Consumption Features to Extract Maintenance KPIs

NASA Astrophysics Data System (ADS)

Simon, Victor; Johansson, Carl-Anders; Galar, Diego

2017-09-01

All electric powered machines offer the possibility of extracting information and calculating Key Performance Indicators (KPIs) from the electric current signal. Depending on the time window, sampling frequency and type of analysis, different indicators from the micro to macro level can be calculated for such aspects as maintenance, production, energy consumption etc. On the micro-level, the indicators are generally used for condition monitoring and diagnostics and are normally based on a short time window and a high sampling frequency. The macro indicators are normally based on a longer time window with a slower sampling frequency and are used as indicators for overall performance, cost or consumption. The indicators can be calculated directly from the current signal but can also be based on a combination of information from the current signal and operational data like rpm, position etc. One or several of those indicators can be used for prediction and prognostics of a machine's future behavior. This paper uses this technique to calculate indicators for maintenance and energy optimization in electric powered machines and fleets of machines, especially machine tools.

The Condition of America's Schools.

ERIC Educational Resources Information Center

Honeyman, David S.; Sayles, Karen

Several studies have documented the condition of U.S. school facilities from the early 80s to the present. This report provides an overview of these major studies, presenting data that assess school construction over the decades, the levels of deferred maintenance and proportion of local school budgets devoted to maintenance, the condition and…

30 CFR 75.506-1 - Electric face equipment; permissible condition; maintenance requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electric face equipment; permissible condition... Equipment-General § 75.506-1 Electric face equipment; permissible condition; maintenance requirements. (a) Except as provided in paragraph (b) of this section, electric face equipment which meets the requirements...

30 CFR 75.506-1 - Electric face equipment; permissible condition; maintenance requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electric face equipment; permissible condition... Equipment-General § 75.506-1 Electric face equipment; permissible condition; maintenance requirements. (a) Except as provided in paragraph (b) of this section, electric face equipment which meets the requirements...

30 CFR 75.506-1 - Electric face equipment; permissible condition; maintenance requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric face equipment; permissible condition... Equipment-General § 75.506-1 Electric face equipment; permissible condition; maintenance requirements. (a) Except as provided in paragraph (b) of this section, electric face equipment which meets the requirements...

30 CFR 75.506-1 - Electric face equipment; permissible condition; maintenance requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electric face equipment; permissible condition... Equipment-General § 75.506-1 Electric face equipment; permissible condition; maintenance requirements. (a) Except as provided in paragraph (b) of this section, electric face equipment which meets the requirements...

30 CFR 75.506-1 - Electric face equipment; permissible condition; maintenance requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electric face equipment; permissible condition... Equipment-General § 75.506-1 Electric face equipment; permissible condition; maintenance requirements. (a) Except as provided in paragraph (b) of this section, electric face equipment which meets the requirements...

Maintenance manager's manual for small transit agencies. Special report 1985-1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, W.

1988-03-01

This publication contains information to assist operators of transit agencies providing public transportation in rural and smaller urban areas to better manage their vehicle maintenance programs. The report includes discussions of maintenance management, maintenance programs preventive maintenance, recordkeeping, selection of type of maintenance operation, in-house maintenance, and maintenance practices. Also included are appendixes giving supplementary information about tire loads; lubrication oil; mechanic hand tools; shop tools; mechanic aptitude tests; technical training resources; maintenance management training resources; and lists of manufacturers of air-conditioning systems, wheelchair lifts and wheelchair ramps.

Link state relationships under incident conditions : using a CTM-based linear programming dynamic traffic assignment model.

DOT National Transportation Integrated Search

2010-03-01

Urban transportation networks, consisting of numerous links and nodes, experience traffic incidents such as accidents and road : maintenance work. A typical consequence of incidents is congestion which results in long queues and causes high travel ti...

Link State Relationships Under Incident Conditions: Using a CTM-Based Linear Programming Dynamic Traffic Assignment Model

DOT National Transportation Integrated Search

2010-03-01

Urban transportation networks, consisting of numerous links and nodes, experience traffic incidents such as accidents and road maintenance work. A typical consequence of incidents is congestion which results in long queues and causes high travel time...

An assessment of the feasibility of developing and implementing an automated pavement distress survey system incorporating digital image processing.

DOT National Transportation Integrated Search

1997-01-01

The rational allocation of pavement maintenance resources requires the periodic assessment of the condition of all pavements. Traditional manual pavement distress surveys, which are based on visual inspection, are labor intensive, slow, and expensive...

Heavy equipment maintenance wastes and environmental management in the mining industry.

PubMed

Guerin, Turlough F

2002-10-01

Maintenance wastes, if not managed properly, represent significant environmental issues for mining operations. Petroleum hydrocarbon liquid wastes were studied at an Australian site and a review of the literature and technology vendors was carried out to identify oil/water separation technologies. Treatment technologies and practices for managing oily wastewater, used across the broader mining industry in the Asia-Pacific region, were also identified. Key findings from the study were: (1) primary treatment is required to remove grease oil contamination and to protect secondary oily wastewater treatment systems from being overloaded; (2) selection of an effective secondary treatment system is dependent on influent oil droplet size and concentration, suspended solids concentration, flow rates (and their variability), environmental conditions, maintenance schedules and effectiveness, treatment targets and costs; and (3) oily wastewater treatment systems, based on mechanical separation, are favoured over those that are chemically based, as they simplify operational requirements. Source reduction, through housekeeping, equipment and reagent modifications, and segregation and/or consolidation of hydrocarbon waste streams, minimizes treatment costs, safety and environmental impact.

Continued Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet

NASA Technical Reports Server (NTRS)

Delgado, Irebert R.; Dempsey, Paula J.; Antolick, Lance J.; Wade, Daniel R.

2013-01-01

This paper details analyses of condition indicator performance for the helicopter nose gearbox within the U.S. Army's Condition-Based Maintenance Program. Ten nose gearbox data sets underwent two specific analyses. A mean condition indicator level analysis was performed where condition indicator performance was based on a 'batting average' measured before and after part replacement. Two specific condition indicators, Diagnostic Algorithm 1 and Sideband Index, were found to perform well for the data sets studied. A condition indicator versus gear wear analysis was also performed, where gear wear photographs and descriptions from Army tear-down analyses were categorized based on ANSI/AGMA 1010-E95 standards. Seven nose gearbox data sets were analyzed and correlated with condition indicators Diagnostic Algorithm 1 and Sideband Index. Both were found to be most responsive to gear wear cases of micropitting and spalling. Input pinion nose gear box condition indicators were found to be more responsive to part replacement during overhaul than their corresponding output gear nose gear box condition indicators.

Building Assessment Survey and Evaluation Study Summarized Data - HVAC Characteristics

EPA Pesticide Factsheets

In the Building Assessment Survey and Evaluation (BASE) Study Information on the characteristics of the heating, ventilation, and air conditioning (HVAC) system(s) in the entire BASE building including types of ventilation, equipment configurations, and operation and maintenance issues was acquired by examining the building plans, conducting a building walk-through, and speaking with the building owner, manager, and/or operator.

[Integral methodologic approach to occupational health maintenance for oil industry workers in North-West Siberia (exemplified by JSC "Novosibirsknephtegaz" model)].

PubMed

Logvinenko, I I; Voevoda, M I; Samadova, D T; Kulinich, V N; Kopylova, O S

2011-01-01

The authors analyzed work conditions and health of workers in oil-extracting industry of Novosibirsk region. Findings are that work safety system based on workplace certification concerning work conditions and on occupational safety activities certification is the most important component in primary prevention of occupational hazardous effects on life and health of workers during the occupational activities.

Diagnostics of Technical Condition of Gear Units of Belt Conveyors for the Aggregate of Methods of Nondestructive Testing

NASA Astrophysics Data System (ADS)

Kuzin, Evgeny G.; Gerike, Boris L.; Drozdenko, Yuriy V.; Lupiy, Michael G.; Grigoryeva, Natalya V.

2017-10-01

The article reviews the issues of complex use of methods of technical diagnostics of gearboxes for belt conveyors, with the aim of creating an effective system of maintenance. The article is showing the results of the evaluation of the technical condition of the drives of belt conveyors based on vibration monitoring and thermal parameters, and analysis of lubricating oil.

Space shuttle maintenance program planning document

NASA Technical Reports Server (NTRS)

Brown, D. V.

1972-01-01

A means for developing a space shuttle maintenance program which will be acceptable to the development centers, the operators (KSC and AF), and the manufacturer is presented. The general organization and decision processes for determining the essential scheduled maintenance requirements for the space shuttle orbiter are outlined. The development of initial scheduled maintenance programs is discussed. The remaining maintenance, that is non-scheduled or non-routine maintenance, is directed by the findings of the scheduled maintenance program and the normal operation of the shuttle. The remaining maintenance consists of maintenance actions to correct discrepancies noted during scheduled maintenance tasks, nonscheduled maintenance, normal operation, or condition monitoring.

Condition Based vs. Time Based Maintenance: Case Study on Hypergolic Pumps

NASA Technical Reports Server (NTRS)

Gibson, Lewis J.

2007-01-01

Two Pad 39B Ox pumps were monitored with the Baker Instruments Explorer Motor tester. Using the torque spectrum it was determined that Ox pump #2 had a significant peak at a frequency, which indicated lubricant fluid whirl. Similar testing on Ox pump #1 didn't indicate this peak, an indication that this pump was in good mechanical condition. Subsequent disassembly of both motors validated these findings. Ox pump #2 rear bearing showed significant wear, the front bearing showed little wear. Ox pump #1 was still within manufacturers tolerances.

The use of emulator-based simulators for on-board software maintenance

NASA Astrophysics Data System (ADS)

Irvine, M. M.; Dartnell, A.

2002-07-01

Traditionally, onboard software maintenance activities within the space sector are performed using hardware-based facilities. These facilities are developed around the use of hardware emulation or breadboards containing target processors. Some sort of environment is provided around the hardware to support the maintenance actives. However, these environments are not easy to use to set-up the required test scenarios, particularly when the onboard software executes in a dynamic I/O environment, e.g. attitude control software, or data handling software. In addition, the hardware and/or environment may not support the test set-up required during investigations into software anomalies, e.g. raise spurious interrupt, fail memory, etc, and the overall "visibility" of the software executing may be limited. The Software Maintenance Simulator (SOMSIM) is a tool that can support the traditional maintenance facilities. The following list contains some of the main benefits that SOMSIM can provide: Low cost flexible extension to existing product - operational simulator containing software processor emulator; System-level high-fidelity test-bed in which software "executes"; Provides a high degree of control/configuration over the entire "system", including contingency conditions perhaps not possible with real hardware; High visibility and control over execution of emulated software. This paper describes the SOMSIM concept in more detail, and also describes the SOMSIM study being carried out for ESA/ESOC by VEGA IT GmbH.

Polyspectral signal analysis techniques for condition based maintenance of helicopter drive-train system

NASA Astrophysics Data System (ADS)

Hassan Mohammed, Mohammed Ahmed

For an efficient maintenance of a diverse fleet of air- and rotorcraft, effective condition based maintenance (CBM) must be established based on rotating components monitored vibration signals. In this dissertation, we present theory and applications of polyspectral signal processing techniques for condition monitoring of critical components in the AH-64D helicopter tail rotor drive train system. Currently available vibration-monitoring tools are mostly built around auto- and cross-power spectral analysis which have limited performance in detecting frequency correlations higher than second order. Studying higher order correlations and their Fourier transforms, higher order spectra, provides more information about the vibration signals which helps in building more accurate diagnostic models of the mechanical system. Based on higher order spectral analysis, different signal processing techniques are developed to assess health conditions of different critical rotating-components in the AH-64D helicopter drive-train. Based on cross-bispectrum, quadratic nonlinear transfer function is presented to model second order nonlinearity in a drive-shaft running between the two hanger bearings. Then, quadratic-nonlinearity coupling coefficient between frequency harmonics of the rotating shaft is used as condition metric to study different seeded shaft faults compared to baseline case, namely: shaft misalignment, shaft imbalance, and combination of shaft misalignment and imbalance. The proposed quadratic-nonlinearity metric shows better capabilities in distinguishing the four studied shaft settings than the conventional linear coupling based on cross-power spectrum. We also develop a new concept of Quadratic-Nonlinearity Power-Index spectrum, QNLPI(f), that can be used in signal detection and classification, based on bicoherence spectrum. The proposed QNLPI(f) is derived as a projection of the three-dimensional bicoherence spectrum into two-dimensional spectrum that quantitatively describes how much of the mean square power at certain frequency f is generated due to nonlinear quadratic interaction between different frequency components. The proposed index, QNLPI(f), can be used to simplify the study of bispectrum and bicoherence signal spectra. It also inherits useful characteristics from the bicoherence such as high immunity to additive Gaussian noise, high capability of nonlinear-systems identifications, and amplification invariance. The quadratic-nonlinear power spectral density PQNL(f) and percentage of quadratic nonlinear power PQNLP are also introduced based on the QNLPI(f). Concept of the proposed indices and their computational considerations are discussed first using computer generated data, and then applied to real-world vibration data to assess health conditions of different rotating components in the drive train including drive-shaft, gearbox, and hanger bearing faults. The QNLPI(f) spectrum enables us to gain more details about nonlinear harmonic generation patterns that can be used to distinguish between different cases of mechanical faults, which in turn helps to gaining more diagnostic/prognostic capabilities.

A qualitative comparative analysis of well-managed school sanitation in Bangladesh

PubMed Central

2014-01-01

Background Continued management of sanitation and hygiene services, post-intervention, is a global challenge, particularly in the school-setting. This situation threatens anticipated impacts of school sanitation and hygiene investments. To improve programming and policies, and increase the effectiveness of limited development resources, we seek to understand how and why some schools have well-managed sanitation post-intervention, while others do not. Methods Based on in-depth qualitative data from 16 case schools in Meherpur, Bangladesh, we employ fuzzy-set qualitative comparative analysis to identify the necessary and sufficient conditions, or combinations of conditions (referred to as pathways), that lead to either well-managed or poorly managed school sanitation. We include posited sustainability determinants from the literature and factors that emerged from the cases themselves in the analysis. Results We identified three distinct pathways sufficient to support well-managed services, providing multiple options for how well-managed school sanitation could be encouraged. Two of these are applicable to both government and non-government schools: (1) quality construction, financial community support and a champion; and (2) quality construction, financial government support, a maintenance plan and school management committee involvement. On-going financial support for operations and maintenance was identified as a necessary condition for continued service management, which was absent from many schools with poorly managed services. However, financial support was insufficient alone and other conditions are needed in conjunction, including quality construction and incentivizing conditions, such as school management committee involvement in sanitation specifically, a sanitation champion, and/or one teacher clearly responsible for toilet maintenance. Surprisingly, the number of students per toilet (ranging from 18–95 students) and toilet age (ranging from 8–32 months) had no significant effect on sanitation conditions. Conclusions Findings corroborate those from a similar study in Belize, and comparison suggests the need for financial community support and the possibly tenuous reliance on local champions in the absence of adequate government support for operations and maintenance. Sub-determinants to the necessary conditions are also discussed which have implications for school sanitation in Bangladesh and may have broader relevance for other low-income countries though further research is needed. PMID:24397540

A qualitative comparative analysis of well-managed school sanitation in Bangladesh.

PubMed

Chatterley, Christie; Javernick-Will, Amy; Linden, Karl G; Alam, Kawser; Bottinelli, Laure; Venkatesh, Mohini

2014-01-08

Continued management of sanitation and hygiene services, post-intervention, is a global challenge, particularly in the school-setting. This situation threatens anticipated impacts of school sanitation and hygiene investments. To improve programming and policies, and increase the effectiveness of limited development resources, we seek to understand how and why some schools have well-managed sanitation post-intervention, while others do not. Based on in-depth qualitative data from 16 case schools in Meherpur, Bangladesh, we employ fuzzy-set qualitative comparative analysis to identify the necessary and sufficient conditions, or combinations of conditions (referred to as pathways), that lead to either well-managed or poorly managed school sanitation. We include posited sustainability determinants from the literature and factors that emerged from the cases themselves in the analysis. We identified three distinct pathways sufficient to support well-managed services, providing multiple options for how well-managed school sanitation could be encouraged. Two of these are applicable to both government and non-government schools: (1) quality construction, financial community support and a champion; and (2) quality construction, financial government support, a maintenance plan and school management committee involvement. On-going financial support for operations and maintenance was identified as a necessary condition for continued service management, which was absent from many schools with poorly managed services. However, financial support was insufficient alone and other conditions are needed in conjunction, including quality construction and incentivizing conditions, such as school management committee involvement in sanitation specifically, a sanitation champion, and/or one teacher clearly responsible for toilet maintenance. Surprisingly, the number of students per toilet (ranging from 18-95 students) and toilet age (ranging from 8-32 months) had no significant effect on sanitation conditions. Findings corroborate those from a similar study in Belize, and comparison suggests the need for financial community support and the possibly tenuous reliance on local champions in the absence of adequate government support for operations and maintenance. Sub-determinants to the necessary conditions are also discussed which have implications for school sanitation in Bangladesh and may have broader relevance for other low-income countries though further research is needed.

Non-Intrusive Load Monitoring of HVAC Components using Signal Unmixing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rahimpour, Alireza; Qi, Hairong; Fugate, David L

Heating, Ventilating and Air Conditioning units (HVAC) are a major electrical energy consumer in buildings. Monitoring of the operation and energy consumption of HVAC would increase the awareness of building owners and maintenance service providers of the condition and quality of performance of these units, enabling conditioned-based maintenance which would help achieving higher energy efficiency. In this paper, a novel non-intrusive load monitoring method based on group constrained non-negative matrix factorization is proposed for monitoring the different components of HVAC unit by only measuring the whole building aggregated power signal. At the first level of this hierarchical approach, power consumptionmore » of the building is decomposed to energy consumption of the HVAC unit and all the other electrical devices operating in the building such as lighting and plug loads. Then, the estimated power signal of the HVAC is used for estimating the power consumption profile of the HVAC major electrical loads such as compressors, condenser fans and indoor blower. Experiments conducted on real data collected from a building testbed maintained at the Oak Ridge National Laboratory (ORNL) demonstrate high accuracy on the disaggregation task.« less

Kalman filter based data fusion for neutral axis tracking in wind turbine towers

NASA Astrophysics Data System (ADS)

Soman, Rohan; Malinowski, Pawel; Ostachowicz, Wieslaw; Paulsen, Uwe S.

2015-03-01

Wind energy is seen as one of the most promising solutions to man's ever increasing demands of a clean source of energy. In particular to reduce the cost of energy (COE) generated, there are efforts to increase the life-time of the wind turbines, to reduce maintenance costs and to ensure high availability. Maintenance costs may be lowered and the high availability and low repair costs ensured through the use of condition monitoring (CM) and structural health monitoring (SHM). SHM allows early detection of damage and allows maintenance planning. Furthermore, it can allow us to avoid unnecessary downtime, hence increasing the availability of the system. The present work is based on the use of neutral axis (NA) for SHM of the structure. The NA is tracked by data fusion of measured yaw angle and strain through the use of Extended Kalman Filter (EKF). The EKF allows accurate tracking even in the presence of changing ambient conditions. NA is defined as the line or plane in the section of the beam which does not experience any tensile or compressive forces when loaded. The NA is the property of the cross section of the tower and is independent of the applied loads and ambient conditions. Any change in the NA position may be used for detecting and locating the damage. The wind turbine tower has been modelled with FE software ABAQUS and validated on data from load measurements carried out on the 34m high tower of the Nordtank, NTK 500/41 wind turbine.

Intervention efficacy and intensity for children with speech sound disorder.

PubMed

Allen, Melissa M

2013-06-01

Clinicians do not have an evidence base they can use to recommend optimum intervention intensity for preschool children who present with speech sound disorder (SSD). This study examined the effect of dose frequency on phonological performance and the efficacy of the multiple oppositions approach. Fifty-four preschool children with SSD were randomly assigned to one of three intervention conditions. Two intervention conditions received the multiple oppositions approach either 3 times per week for 8 weeks (P3) or once weekly for 24 weeks (P1). A control (C) condition received a storybook intervention. Percentage of consonants correct (PCC) was evaluated at 8 weeks and after 24 sessions. PCC gain was examined after a 6-week maintenance period. The P3 condition had a significantly better phonological outcome than the P1 and C conditions at 8 weeks and than the P1 condition after 24 weeks. There were no significant differences between the P1 and C conditions. There was no significant difference between the P1 and P3 conditions in PCC gain during the maintenance period. Preschool children with SSD who received the multiple oppositions approach made significantly greater gains when they were provided with a more intensive dose frequency and when cumulative intervention intensity was held constant.

Prediction accident triangle in maintenance of underground mine facilities using Poisson distribution analysis

NASA Astrophysics Data System (ADS)

Khuluqi, M. H.; Prapdito, R. R.; Sambodo, F. P.

2018-04-01

In Indonesia, mining is categorized as a hazardous industry. In recent years, a dramatic increase of mining equipment and technological complexities had resulted in higher maintenance expectations that accompanied by the changes in the working conditions, especially on safety. Ensuring safety during the process of conducting maintenance works in underground mine is important as an integral part of accident prevention programs. Accident triangle has provided a support to safety practitioner to draw a road map in preventing accidents. Poisson distribution is appropriate for the analysis of accidents at a specific site in a given time period. Based on the analysis of accident statistics in the underground mine maintenance of PT. Freeport Indonesia from 2011 through 2016, it is found that 12 minor accidents for 1 major accident and 66 equipment damages for 1 major accident as a new value of accident triangle. The result can be used for the future need for improving the accident prevention programs.

The resist diabetes trial: Rationale, design, and methods of a hybrid efficacy/effectiveness intervention trial for resistance training maintenance to improve glucose homeostasis in older prediabetic adults.

PubMed

Marinik, Elaina L; Kelleher, Sarah; Savla, Jyoti; Winett, Richard A; Davy, Brenda M

2014-01-01

Advancing age is associated with reduced levels of physical activity, increased body weight and fat, decreased lean body mass, and a high prevalence of type 2 diabetes (T2D). Resistance training (RT) increases muscle strength and lean body mass, and reduces risk of T2D among older adults. The Resist Diabetes trial will determine if a social cognitive theory (SCT)-based intervention improves RT maintenance in older, prediabetic adults, using a hybrid efficacy/effectiveness approach. Sedentary, overweight/obese (BMI: 25-39.9 kg/m(2)) adults aged 50-69 (N = 170) with prediabetes (impaired fasting glucose and/or impaired glucose tolerance) completed a supervised 3-month RT (2×/wk) initiation phase and were then randomly assigned (N = 159; 94% retention) to one of two 6-month maintenance conditions: SCT or standard care. The SCT intervention consisted of faded contacts compared to standard care. Participants continue RT at an approved, self-selected community facility during maintenance. A subsequent 6-month period involves no contact for both conditions. Assessments occur at baseline and months 3 (post-initiation), 9 (post-intervention), and 15 (six months after no contact). Primary outcomes are prediabetes indices (i.e., impaired fasting and 2-hour glucose concentration) and strength. Secondary measures include insulin sensitivity, beta-cell responsiveness, and disposition index (oral glucose and C-peptide minimal model); adherence; body composition; and SCT measures. Resist Diabetes is the first trial to examine the effectiveness of a high fidelity SCT-based intervention for maintaining RT in older adults with prediabetes to improve glucose homeostasis. Successful application of SCT constructs for RT maintenance may support translation of our RT program for diabetes prevention into community settings. Copyright © 2013 Elsevier Inc. All rights reserved.

Domain-Generality of Timing-Based Serial Order Processes in Short-Term Memory: New Insights from Musical and Verbal Domains

PubMed Central

Kowialiewski, Benjamin; Majerus, Steve

2016-01-01

Several models in the verbal domain of short-term memory (STM) consider a dissociation between item and order processing. This view is supported by data demonstrating that different types of time-based interference have a greater effect on memory for the order of to-be-remembered items than on memory for the items themselves. The present study investigated the domain-generality of the item versus serial order dissociation by comparing the differential effects of time-based interfering tasks, such as rhythmic interference and articulatory suppression, on item and order processing in verbal and musical STM domains. In Experiment 1, participants had to maintain sequences of verbal or musical information in STM, followed by a probe sequence, this under different conditions of interference (no-interference, rhythmic interference, articulatory suppression). They were required to decide whether all items of the probe list matched those of the memory list (item condition) or whether the order of the items in the probe sequence matched the order in the memory list (order condition). In Experiment 2, participants performed a serial order probe recognition task for verbal and musical sequences ensuring sequential maintenance processes, under no-interference or rhythmic interference conditions. For Experiment 1, serial order recognition was not significantly more impacted by interfering tasks than was item recognition, this for both verbal and musical domains. For Experiment 2, we observed selective interference of the rhythmic interference condition on both musical and verbal order STM tasks. Overall, the results suggest a similar and selective sensitivity to time-based interference for serial order STM in verbal and musical domains, but only when the STM tasks ensure sequential maintenance processes. PMID:27992565

Domain-Generality of Timing-Based Serial Order Processes in Short-Term Memory: New Insights from Musical and Verbal Domains.

PubMed

Gorin, Simon; Kowialiewski, Benjamin; Majerus, Steve

2016-01-01

Several models in the verbal domain of short-term memory (STM) consider a dissociation between item and order processing. This view is supported by data demonstrating that different types of time-based interference have a greater effect on memory for the order of to-be-remembered items than on memory for the items themselves. The present study investigated the domain-generality of the item versus serial order dissociation by comparing the differential effects of time-based interfering tasks, such as rhythmic interference and articulatory suppression, on item and order processing in verbal and musical STM domains. In Experiment 1, participants had to maintain sequences of verbal or musical information in STM, followed by a probe sequence, this under different conditions of interference (no-interference, rhythmic interference, articulatory suppression). They were required to decide whether all items of the probe list matched those of the memory list (item condition) or whether the order of the items in the probe sequence matched the order in the memory list (order condition). In Experiment 2, participants performed a serial order probe recognition task for verbal and musical sequences ensuring sequential maintenance processes, under no-interference or rhythmic interference conditions. For Experiment 1, serial order recognition was not significantly more impacted by interfering tasks than was item recognition, this for both verbal and musical domains. For Experiment 2, we observed selective interference of the rhythmic interference condition on both musical and verbal order STM tasks. Overall, the results suggest a similar and selective sensitivity to time-based interference for serial order STM in verbal and musical domains, but only when the STM tasks ensure sequential maintenance processes.

Effects of load and maintenance duration on the time course of information encoding and retrieval in working memory: from perceptual analysis to post-categorization processes.

PubMed

Pinal, Diego; Zurrón, Montserrat; Díaz, Fernando

2014-01-01

information encoding, maintenance, and retrieval; these are supported by brain activity in a network of frontal, parietal and temporal regions. Manipulation of WM load and duration of the maintenance period can modulate this activity. Although such modulations have been widely studied using the event-related potentials (ERP) technique, a precise description of the time course of brain activity during encoding and retrieval is still required. Here, we used this technique and principal component analysis to assess the time course of brain activity during encoding and retrieval in a delayed match to sample task. We also investigated the effects of memory load and duration of the maintenance period on ERP activity. Brain activity was similar during information encoding and retrieval and comprised six temporal factors, which closely matched the latency and scalp distribution of some ERP components: P1, N1, P2, N2, P300, and a slow wave. Changes in memory load modulated task performance and yielded variations in frontal lobe activation. Moreover, the P300 amplitude was smaller in the high than in the low load condition during encoding and retrieval. Conversely, the slow wave amplitude was higher in the high than in the low load condition during encoding, and the same was true for the N2 amplitude during retrieval. Thus, during encoding, memory load appears to modulate the processing resources for context updating and post-categorization processes, and during retrieval it modulates resources for stimulus classification and context updating. Besides, despite the lack of differences in task performance related to duration of the maintenance period, larger N2 amplitude and stronger activation of the left temporal lobe after long than after short maintenance periods were found during information retrieval. Thus, results regarding the duration of maintenance period were complex, and future work is required to test the time-based decay theory predictions.

Investigation on chlorine-based sanitization under stabilized conditions in the presence of organic load

USDA-ARS?s Scientific Manuscript database

Chlorine is commonly used for preventing water-mediated cross contamination during fresh produce washing. The sanitization efficacy (SE) is constantly compromised by the organic load (OL), which has been attributed to rapid chlorine depletion and unsuccessful maintenance of residual free chlorine (F...

A Condition Based Maintenance Approach to Forecasting B-1 Aircraft Parts

DTIC Science & Technology

2017-03-23

1 Problem Statement...aimed at making the USAF aware of CBM methods, and recommending which techniques to consider for implementation. Problem Statement The USAF relies on... problem , this research will seek to highlight common CBM forecasting methods that are well established and evaluate its suitability with current USAF

For Whom Does It Work? Moderators of Outcome on the Effect of a Transdiagnostic Internet-Based Maintenance Treatment After Inpatient Psychotherapy: Randomized Controlled Trial

PubMed Central

Gollwitzer, Mario; Riper, Heleen; Cuijpers, Pim; Baumeister, Harald; Berking, Matthias

2013-01-01

Background Recent studies provide evidence for the effectiveness of Internet-based maintenance treatments for mental disorders. However, it is still unclear which participants might or might not profit from this particular kind of treatment delivery. Objective The study aimed to identify moderators of treatment outcome in a transdiagnostic Internet-based maintenance treatment (TIMT) offered to patients after inpatient psychotherapy for mental disorders in routine care. Methods Using data from a randomized controlled trial (N=400) designed to test the effectiveness of TIMT, we performed secondary analyses to identify factors moderating the effects of TIMT (intervention) when compared with those of a treatment-as-usual control condition. TIMT involved an online self-management module, asynchronous patient–therapist communication, a peer support group, and online-based progress monitoring. Participants in the control condition had unstructured access to outpatient psychotherapy, standardized outpatient face-to-face continuation treatment, and psychotropic management. Self-reports of psychopathological symptoms and potential moderators were assessed at the start of inpatient treatment (T1), at discharge from inpatient treatment/start of TIMT (T2), and at 3-month (T3) and 12-month follow-up (T4). Results Education level, positive outcome expectations, and diagnoses significantly moderated intervention versus control differences regarding changes in outcomes between T2 and T3. Only education level moderated change differences between T2 and T4. The effectiveness of the intervention (vs control) was more pronounced among participants with a low (vs high) education level (T2-T3: B=–0.32, SE 0.16, P=.049; T2-T4: B=–0.42, SE 0.21, P=.049), participants with high (vs low) positive outcome expectations (T2-T3: B=–0.12, SE 0.05, P=.02) and participants with anxiety disorder (vs mood disorder) (T2-T3: B=–0.43, SE 0.21, P=.04). Simple slope analyses revealed that despite some subgroups benefiting less from the intervention than others, all subgroups still benefited significantly. Conclusions This transdiagnostic Internet-based maintenance treatment might be suitable for a wide range of participants differing in various clinical, motivational, and demographic characteristics. The treatment is especially effective for participants with low education levels. These findings may generalize to other Internet-based maintenance treatments. Trial Registration International Standard Randomized Controlled Trial Number (ISRCTN): 28632626; http://www.controlled-trials.com/isrctn/pf/28632626 (Archived by WebCite at http://www.webcitation.org/6IqZjTLrx). PMID:24113764

The Condition of the Infrastructure of New York Schools: Who Pays and Who Benefits?

ERIC Educational Resources Information Center

Crampton, Faith E.

1991-01-01

Insufficient resource allocation to facilities maintenance and decisions to defer maintenance are contributors to a backlog of deferred maintenance nationwide. Focuses on the infrastructure of New York schools and suggests incentives at the state level to ensure adequate attention is given to plant maintenance. (eight references) (MLF)

Best practices handbook on asphalt pavement maintenance

DOT National Transportation Integrated Search

2000-02-01

The purpose of this handbook is to provide background information about the importance of pavement preservation and preventive maintenance, as well as present maintenance techniques for a variety of distresses and conditions. The major focus of this ...

A Proposed Approach for Prioritizing Maintenance at NASA Centers

NASA Technical Reports Server (NTRS)

Dunn, Steven C.; Sawyer, Melvin H.

2013-01-01

The National Aeronautics and Space Administration (NASA) manages a vast array of infrastructure assets across ten National Centers with a worth of at least 30 billion dollars. Eighty percent of this infrastructure is greater than 40 years old and is in degraded condition. Maintenance budgets are typically less than one percent of current replacement value (CRV), much less than the 2-4% recommended by the National Research Council. The maintenance backlog was 2.55 billion dollars in FY10 and growing. NASA s annual budgets have flattened and are at risk of being reduced, so the problem is becoming even more difficult. NASA Centers utilize various means to prioritize and accomplish maintenance within available budgets, though data is suspect and processes are variable. This paper offers a structured means to prioritize maintenance based on mission criticality and facility performance (ability of the facility to deliver on its purpose). Mission alignment is assessed using the current timeframe Mission Dependence Index and a measure of facility alignment with the 2011 NASA Strategic Plan for the long-term perspective. Facility performance is assessed by combining specific findings from a structured facility condition assessment and an assessment of actual functional output. These are then combined in a matrix to identify the facilities most critical to mission and able to deliver services. The purpose of this approach is to provide the best benefits for the available funding. Additionally, this rationale can also be applied to the prioritization of investment (recapitalization) projects so that the ultimate customers of this paper, the senior infrastructure managers at each NASA Center, are better able to strategically manage their capabilities.

Economics of online structural health monitoring of wind turbines: Cost benefit analysis

NASA Astrophysics Data System (ADS)

Van Dam, Jeremy; Bond, Leonard J.

2015-03-01

Operations and maintenance (O&M) costs have an average share over the lifetime of the turbine of approximately 20%-25% of the total levelized cost per kWh of electricity produced. Online structural health monitoring (OSHM) and condition-based maintenance (CBM) of wind turbine blades has the potential to reduce O&M costs and hence reduce the overall cost of wind energy. OSHM and CBM offer the potential to improve turbine blade life cycle management, limit the number of physical inspections, and reduce the potential for missed significant defects. An OSHM system would reduce the need for physical inspections, and have inspections occur only after problem detection takes place. In the economics of wind energy, failures and unplanned outages can cause significant downtime, particularly while waiting for the manufacturing and shipping of major parts. This paper will report a review and assessment of SHM technologies and a cost benefit analysis, which will examine whether the added costs associated with an OSHM system will give an adequate return on the investment. One method in which OSHM reduces costs is, in part, by converting corrective maintenance to preventative maintenance. This paper shows that under both best and worse conditions implementing an OSHM system is cost effective in more than 50% of the trials, which have been performed. Opportunities appear to exist to improve the economic justification for implementing OSHM.

Cognitive ergonomics: the use of mind mapping tool in maintaining productive sector of a Brazilian paper company.

PubMed

Mattos, Diego; Mateus, José Roberto; Merino, Eugenio

2012-01-01

The use of mind maps as a method of building knowledge, planning, organizing activities and ideas can be seen in the literature related to ergonomics. The results of such use are relevant and its use in academic area found. However, regarding to its use in industrial environments, studies can't not be found. With this scenario, and based on the perception of the ergonomist about the importance of using methods such as mind maps in support of human cognition, it seems pertinent to its use in industry sectors whose cognitive demand requires. Given these assumptions, this study aimed to apply the method of Mind Maps in Productive Maintenance sector of a Brazilian paper. The Productive Maintenance sector in the Paper Industry has an important contribution to operational performance. With practical Predictive Maintenance, Preventive Maintenance and Corrective Maintenance, the industry advocates to make the machines to produce paper is not to stop producing when they are programmed to do so. Among the practices cited, the Preventive Maintenance is one that leads to pre-determined intervals in order to reduce the possibility of placing the equipment in a condition below the required level of acceptance. Therefore, this article aims to propose using the tool "mental maps" in order to collaborate in planning and implementation of preventive maintenance activities in the sector of mechanical maintenance of a pulp and paper industry in southern Brazil. The study investigated the maintenance sector through its employees, who went through training about the tool and then use it and ergonomists company.

A real time study on condition monitoring of distribution transformer using thermal imager

NASA Astrophysics Data System (ADS)

Mariprasath, T.; Kirubakaran, V.

2018-05-01

The transformer is one of the critical apparatus in the power system. At any cost, a few minutes of outages harshly influence the power system. Hence, prevention-based maintenance technique is very essential. The continuous conditioning and monitoring technology significantly increases the life span of the transformer, as well as reduces the maintenance cost. Hence, conditioning and monitoring of transformer's temperature are very essential. In this paper, a critical review has been made on various conditioning and monitoring techniques. Furthermore, a new method, hot spot indication technique, is discussed. Also, transformer's operating condition is monitored by using thermal imager. From the thermal analysis, it is inferred that major hotspot locations are appearing at connection lead out; also, the bushing of the transformer is the very hottest spot in transformer, so monitoring the level of oil is essential. Alongside, real time power quality analysis has been carried out using the power analyzer. It shows that industrial drives are injecting current harmonics to the distribution network, which causes the power quality problem on the grid. Moreover, the current harmonic limit has exceeded the IEEE standard limit. Hence, the adequate harmonics suppression technique is need an hour.

In situ monitoring of the integrity of bonded repair patches on aircraft and civil infrastructures

NASA Astrophysics Data System (ADS)

Kumar, Amrita; Roach, Dennis; Beard, Shawn; Qing, Xinlin; Hannum, Robert

2006-03-01

Monitoring the continued health of aircraft subsystems and identifying problems before they affect airworthiness has been a long-term goal of the aviation industry. Because in-service conditions and failure modes experienced by structures are generally complex and unknown, conservative calendar-based or usage-based scheduled maintenance practices are overly time-consuming, labor-intensive and expensive. Metal structures such as helicopters and other transportation systems are likely to develop fatigue cracks under cyclic loads and corrosive service environments. Early detection of cracks is a key element to prevent catastrophic failure and prolong structural life. Furthermore, as structures age, maintenance service frequency and costs increase while performance and availability decrease. Current non-destructive inspection (NDI) techniques that can potentially be used for this purpose typically involve complex, time-intensive procedures, which are labor-intensive and expensive. Most techniques require access to the damaged area on at least one side, and sometimes on both sides. This can be very difficult for monitoring of certain inaccessible regions. In those cases, inspection may require removal of access panels or even structural disassembly. Once access has been obtained, automated inspection techniques likely will not be practical due to the bulk of the required equipment. Results obtained from these techniques may also be sensitive to the sweep speed, tool orientation, and downward pressure. This can be especially problematic for hand-held inspection tools where none of these parameters is mechanically controlled. As a result, data can vary drastically from one inspection to the next, from one technician to the next, and even from one sweep to the next. Structural health monitoring (SHM) offers the promise of a paradigm shift from schedule-driven maintenance to condition-based maintenance (CBM) of assets. Sensors embedded permanently in aircraft safety critical structures that can monitor damage can provide for improved reliability and streamlining of aircraft maintenance. Early detection of damage such as fatigue crack initiation can improve personnel safety and prolong service life. This paper presents the testing of an acousto-ultrasonic piezoelectric sensor based structural health monitoring system for real-time monitoring of fatigue cracks and disbonds in bonded repairs. The system utilizes a network of distributed miniature piezoelectric sensors/actuators embedded on a thin dielectric carrier film, to query, monitor and evaluate the condition of a structure. The sensor layers are extremely flexible and can be integrated with any type of metal or composite structure. Diagnostic signals obtained from a structure during structural monitoring are processed by a portable diagnostic unit. With appropriate diagnostic software, the signals can be analyzed to ascertain the integrity of the structure being monitored. Details on the system, its integration and examples of detection of fatigue crack and disbond growth and quantification for bonded repairs will be presented here.

Hotspot and sampling analysis for effective maintenance and performance monitoring.

DOT National Transportation Integrated Search

2017-05-01

In this project, we propose two sampling methods addressing how much and where the agencies need to collect infrastraucture condition data for accurate Level-of-Maintenance (LOM) estimation in maintenance network with single type or multiple ty...

Organizational Policy Decisions as a Function of Individual Differences and Task Design: Maintenance Tasks. Technical Report No. 10.

ERIC Educational Resources Information Center

O'Connor, Edward J.; And Others

Ninety subjects completed identical simulated maintenance tasks under two experimental conditions. In the high job structural attribute condition subjects were told that the task was high in learning new skills, responsibility, feedback, and task identity; while in the low job structural condition they were told the opposite. Results indicated the…

SUMMARY OF ELECTRIC SERVICE COSTS FOR TOTALLY AIR CONDITIONED SCHOOLS PREPARED FOR HOUSTON INDEPENDENT SCHOOL DISTRICT, MAY 31, 1967.

ERIC Educational Resources Information Center

WHITESIDES, M.M.

THIS REPORT IS A COMPILATION OF DATA ON ELECTRIC AIR CONDITIONING COSTS, OPERATIONS AND MAINTENANCE. AIR CONDITIONING UNITS ARE COMPARED IN TERMS OF ELECTRIC VERSUS NON-ELECTRIC, AUTOMATIC VERSUS OPERATED, AIR COOLED VERSUS WATER COOLED, RECIPROCATING VERSUS CENTRIFUGAL COMPRESSORS, SPACE AND NOISE, REHEAT, MAINTENANCE AND ORIGINAL COST. DATA ARE…

Diagnosis-Based Risk Adjustment for Medicare Capitation Payments

PubMed Central

Ellis, Randall P.; Pope, Gregory C.; Iezzoni, Lisa I.; Ayanian, John Z.; Bates, David W.; Burstin, Helen; Ash, Arlene S.

1996-01-01

Using 1991-92 data for a 5-percent Medicare sample, we develop, estimate, and evaluate risk-adjustment models that utilize diagnostic information from both inpatient and ambulatory claims to adjust payments for aged and disabled Medicare enrollees. Hierarchical coexisting conditions (HCC) models achieve greater explanatory power than diagnostic cost group (DCG) models by taking account of multiple coexisting medical conditions. Prospective models predict average costs of individuals with chronic conditions nearly as well as concurrent models. All models predict medical costs far more accurately than the current health maintenance organization (HMO) payment formula. PMID:10172666

Improving linear transport infrastructure efficiency by automated learning and optimised predictive maintenance techniques (INFRALERT)

NASA Astrophysics Data System (ADS)

Jiménez-Redondo, Noemi; Calle-Cordón, Alvaro; Kandler, Ute; Simroth, Axel; Morales, Francisco J.; Reyes, Antonio; Odelius, Johan; Thaduri, Aditya; Morgado, Joao; Duarte, Emmanuele

2017-09-01

The on-going H2020 project INFRALERT aims to increase rail and road infrastructure capacity in the current framework of increased transportation demand by developing and deploying solutions to optimise maintenance interventions planning. It includes two real pilots for road and railways infrastructure. INFRALERT develops an ICT platform (the expert-based Infrastructure Management System, eIMS) which follows a modular approach including several expert-based toolkits. This paper presents the methodologies and preliminary results of the toolkits for i) nowcasting and forecasting of asset condition, ii) alert generation, iii) RAMS & LCC analysis and iv) decision support. The results of these toolkits in a meshed road network in Portugal under the jurisdiction of Infraestruturas de Portugal (IP) are presented showing the capabilities of the approaches.

7 CFR 1730.22 - Borrower analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... which could indicate deterioration in the physical or cyber condition or the operational effectiveness of the system or suggest a need for changes in security, operations or maintenance policies... AGRICULTURE ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.22...

7 CFR 1730.22 - Borrower analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... which could indicate deterioration in the physical or cyber condition or the operational effectiveness of the system or suggest a need for changes in security, operations or maintenance policies... AGRICULTURE ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.22...

7 CFR 1730.22 - Borrower analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... which could indicate deterioration in the physical or cyber condition or the operational effectiveness of the system or suggest a need for changes in security, operations or maintenance policies... AGRICULTURE ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.22...

7 CFR 1730.22 - Borrower analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... which could indicate deterioration in the physical or cyber condition or the operational effectiveness of the system or suggest a need for changes in security, operations or maintenance policies... AGRICULTURE ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.22...

Rapid Transit Subways - Maintenance Guidelines for Engineering New Installations for Reduced Maintenance

DOT National Transportation Integrated Search

1978-01-01

Economic design of new subways requires optimization of installation and maintenance costs of all the major constituent items. A prerequisite for this is an awareness of the rigorous environmental and other conditions imposed on the subway. Changing ...

Developing a CD-CBM Anticipatory Approach for Cavitation - Defining a Model-Based Descriptor Consistent Across Processes, Phase 1 Final Report Context-Dependent Prognostics and Health Assessment: A New Paradigm for Condition-based Maintenance SBIR Topic No. N98-114

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allgood, G.O.; Dress, W.B.; Kercel, S.W.

1999-06-01

The objective of this research, and subsequent testing, was to identify specific features of cavitation that could be used as a model-based descriptor in a context-dependent condition-based maintenance (CD-CBM) anticipatory prognostic and health assessment model. This descriptor is based on the physics of the phenomena, capturing the salient features of the process dynamics. The test methodology and approach were developed to make the cavitation features the dominant effect in the process and collected signatures. This would allow the accurate characterization of the salient cavitation features at different operational states. By developing such an abstraction, these attributes can be used asmore » a general diagnostic for a system or any of its components. In this study, the particular focus will be pumps. As many as 90% of pump failures are catastrophic. They seem to be operating normally and fail abruptly without warning. This is true whether the failure is sudden hardware damage requiring repair, such as a gasket failure, or a transition into an undesired operating mode, such as cavitation. This means that conventional diagnostic methods fail to predict 90% of incipient failures and that in addressing this problem, model-based methods can add value where it is actually needed.« less

Modeling the impact of thermal effects on luminous flux maintenance for SSL luminaires

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Lynn; Mills, Karmann; Lamvik, Michael

Meeting the longevity requirements of solid-state lighting (SSL) devices places extreme demands on the materials and designs that are used in SSL luminaires. Therefore, understanding the aging characteristics of lens, reflectors, and other materials is essential to projecting the long-term performance of LED-based lighting systems. Overlooking these factors at either the design or product specification stage can result in premature failure of the device due to poor luminous flux maintenance and/or excessive chromaticity shifts. This paper describes a methodology for performing accelerated stress testing (AST) on materials intended for use in SSL luminaires. This test methodology, which consists of elevatedmore » temperature and humidity conditions, produces accelerated aging data that can be correlated to expected performance under normal luminaire operating conditions. The correlations can then be leveraged to produce models of the changes in the optical properties of key materials including transmittance versus wavelength of lenses and reflectance versus wavelength for housings and other reflectors. This information has been collected into a lumen maintenance decision support tool (LM-DST) and together with user supplied inputs (e.g., expected operation conditions) can provide guidance on lifetime expectations of SSL luminaires. This approach has been applied to a variety of materials commonly found in SSL luminaires including acrylics, polycarbonates, and silicones used for lenses and paints, coatings, films, and composites used for reflectors.« less

Road structural elements temperature trends diagnostics using sensory system of own design

NASA Astrophysics Data System (ADS)

Dudak, Juraj; Gaspar, Gabriel; Sedivy, Stefan; Pepucha, Lubomir; Florkova, Zuzana

2017-09-01

A considerable funds is spent for the roads maintenance in large areas during the winter. The road maintenance is significantly affected by the temperature change of the road structure. In remote locations may occur a situation, when it is not clear whether the sanding is actually needed because the lack of information on road conditions. In these cases, the actual road conditions are investigated by a personal inspection or by sending out a gritting vehicle. Here, however, is a risk of unnecessary trip the sanding vehicle. This situation is economically and environmentally unfavorable. The proposed system solves the problem of measuring the temperature profile of the road and the utilization of the predictive model to determine the future development trend of temperature. The system was technically designed as a set of sensors to monitor environmental values such as the temperature of the road, ambient temperature, relative air humidity, solar radiation and atmospheric pressure at the measuring point. An important part of the proposal is prediction model which based on the inputs from sensors and historical measurements can, with some probability, predict temperature trends at the measuring point. The proposed system addresses the economic and environmental aspects of winter road maintenance.

Randomized Trial of Two Dissemination Strategies for a Skin Cancer Prevention Program in Aquatic Settings

PubMed Central

Escoffery, Cam; Elliott, Tom; Nehl, Eric J.

2015-01-01

Objectives. We compared 2 strategies for disseminating an evidence-based skin cancer prevention program. Methods. We evaluated the effects of 2 strategies (basic vs enhanced) for dissemination of the Pool Cool skin cancer prevention program in outdoor swimming pools on (1) program implementation, maintenance, and sustainability and (2) improvements in organizational and environmental supports for sun protection. The trial used a cluster-randomized design with pools as the unit of intervention and outcome. The enhanced group received extra incentives, reinforcement, feedback, and skill-building guidance. Surveys were collected in successive years (2003–2006) from managers of 435 pools in 33 metropolitan areas across the United States participating in the Pool Cool Diffusion Trial. Results. Both treatment groups improved their implementation of the program, but pools in the enhanced condition had significantly greater overall maintenance of the program over 3 summers of participation. Furthermore, pools in the enhanced condition established and maintained significantly greater sun-safety policies and supportive environments over time. Conclusions. This study found that more intensive, theory-driven dissemination strategies can significantly enhance program implementation and maintenance of health-promoting environmental and policy changes. Future research is warranted through longitudinal follow-up to examine sustainability. PMID:25521872

Meteorological tower design for severe weather and remote locations

Treesearch

Kelly Elder; Ilkoo Angutikjuak; Jessica Baker; Matt Belford; Tom Bennett; Karl Birkeland; Daniel Bowker; Doug Chabot; April Cheuvront; Mark Dixon; Dylan Elder; Lee Elder; Shari Gearheard; Greg Giedt; Kim Grant; Sam Green; Ethan Greene; Nick Houfek; Caleb Huntington; Henry Huntington; Thomas Huntington; Daniel Janigian; Crane Johnson; Glen Liston; Rob Maris; Andrea Marsh; Hans-Peter Marshall; Aidan Meiners; Alex Meiners; Theo Meiners; Limakee Palluq; Josh Pope; Esa Qillaq; Joelli Sanguya; Sam Sehnert; Ron Simenhois; Banning Starr; Roger Tyler

2012-01-01

We have developed a robust meteorological tower for deployment in locations with extreme conditions and for applications that require relatively maintenance-free structures. The basic design consists of a triangular base with two horizontal rails on each side, and uprights at the triangle vertices for various instrument configurations. The fabrication materials include...

Three integrated projects to enhance non-contact rail inspection technology for application to substructure health evaluation on both rail and road bridges : final project report.

DOT National Transportation Integrated Search

2014-01-01

Causing loss of use and sometimes life, bridge collapses are always high profile and hit many wallets. The economic benefits of condition-based maintenance are well established, including reduced visual inspection and potentially longer structural li...

Evaluating Deficiencies in Campus Facilities: The Institutional Research/Physical Plant Nexus.

ERIC Educational Resources Information Center

Casey, John M.

The University of Georgia (UG) conducted a complete campus building condition evaluation survey in 1989 that identified the nature and magnitude of the capital renewal/deferred maintenance requirements for each campus building. The survey design was based on a model developed by Harlan Bareither at the University of Illinois. Data were collected…

Exceptional Brain Aging in a Rural Population-Based Cohort

ERIC Educational Resources Information Center

Kaye, Jeffrey; Michael, Yvonne; Calvert, James; Leahy, Marjorie; Crawford, Debbie; Kramer, Patricia

2009-01-01

Context: The 2000 US Census identified 50,454 Americans over the age of 100. Increased longevity is only of benefit if accompanied by maintenance of independence and quality of life. Little is known about the prevalence of dementia and other disabling conditions among rural centenarians although this information is important to clinicians caring…

32 CFR 231.7 - Procedures-domestic credit unions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintenance (such as grass cutting and snow removal), heating and air conditioning, utilities (i.e... service shall do so in accordance with § 231.4(d). (h) Staffing. (1) On-base credit unions shall provide... counselor available to serve members during operating hours. (2) Exceptions to paragraph (h)(1)(i) of this...

32 CFR 231.7 - Procedures-domestic credit unions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... maintenance (such as grass cutting and snow removal), heating and air conditioning, utilities (i.e... service shall do so in accordance with § 231.4(d). (h) Staffing. (1) On-base credit unions shall provide... counselor available to serve members during operating hours. (2) Exceptions to paragraph (h)(1)(i) of this...

Reliability-centered maintenance for ground-based large optical telescopes and radio antenna arrays

NASA Astrophysics Data System (ADS)

Marchiori, G.; Formentin, F.; Rampini, F.

2014-07-01

In the last years, EIE GROUP has been more and more involved in large optical telescopes and radio antennas array projects. In this frame, the paper describes a fundamental aspect of the Logistic Support Analysis (LSA) process, that is the application of the Reliability-Centered Maintenance (RCM) methodology for the generation of maintenance plans for ground-based large optical telescopes and radio antennas arrays. This helps maintenance engineers to make sure that the telescopes continue to work properly, doing what their users require them to do in their present operating conditions. The main objective of the RCM process is to establish the complete maintenance regime, with the safe minimum required maintenance, carried out without any risk to personnel, telescope and subsystems. At the same time, a correct application of the RCM allows to increase the cost effectiveness, telescope uptime and items availability, and to provide greater understanding of the level of risk that the organization is managing. At the same time, engineers shall make a great effort since the initial phase of the project to obtain a telescope requiring easy maintenance activities and simple replacement of the major assemblies, taking special care on the accesses design and items location, implementation and design of special lifting equipment and handling devices for the heavy items. This maintenance engineering framework is based on seven points, which lead to the main steps of the RCM program. The initial steps of the RCM process consist of: system selection and data collection (MTBF, MTTR, etc.), definition of system boundaries and operating context, telescope description with the use of functional block diagrams, and the running of a FMECA to address the dominant causes of equipment failure and to lay down the Critical Items List. In the second part of the process the RCM logic is applied, which helps to determine the appropriate maintenance tasks for each identified failure mode. Once the logic is completed for all the analyzed items, the resulting Maintenance Program is compiled in order to preserve all the system important functions and to rationalize the tasks periodicities. Lastly, the RCM is kept alive throughout the entire life of the telescope, where the effectiveness of the maintenance is constantly reviewed and adjusted on the basis of the "lesson learned". In addition to the RCM analysis methodology, a second basic concept is applied for the telescope maintenance: to design and install components in such a manner to restore a failure and to perform servicing procedures as close as possible to the telescope, maximizing the replacement of Line Replaceable Units (LRUs) or Shop Replaceable Units (SRUs), rather than repair on-equipment.

On-line experimental validation of a model-based diagnostic algorithm dedicated to a solid oxide fuel cell system

NASA Astrophysics Data System (ADS)

Polverino, Pierpaolo; Esposito, Angelo; Pianese, Cesare; Ludwig, Bastian; Iwanschitz, Boris; Mai, Andreas

2016-02-01

In the current energetic scenario, Solid Oxide Fuel Cells (SOFCs) exhibit appealing features which make them suitable for environmental-friendly power production, especially for stationary applications. An example is represented by micro-combined heat and power (μ-CHP) generation units based on SOFC stacks, which are able to produce electric and thermal power with high efficiency and low pollutant and greenhouse gases emissions. However, the main limitations to their diffusion into the mass market consist in high maintenance and production costs and short lifetime. To improve these aspects, the current research activity focuses on the development of robust and generalizable diagnostic techniques, aimed at detecting and isolating faults within the entire system (i.e. SOFC stack and balance of plant). Coupled with appropriate recovery strategies, diagnosis can prevent undesired system shutdowns during faulty conditions, with consequent lifetime increase and maintenance costs reduction. This paper deals with the on-line experimental validation of a model-based diagnostic algorithm applied to a pre-commercial SOFC system. The proposed algorithm exploits a Fault Signature Matrix based on a Fault Tree Analysis and improved through fault simulations. The algorithm is characterized on the considered system and it is validated by means of experimental induction of faulty states in controlled conditions.

Final Exam.

ERIC Educational Resources Information Center

Coullahan, Richard

1998-01-01

Explains the use of a maintenance-management assessment process that educational facility managers can use to improve facility conditions and to provide evidence for future capital investments in maintenance management. Discusses questions a maintenance-management audit can answer and describes how to analyze the data to gain maximum understanding…

21 CFR 529.1115 - Halothane.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Conditions of use—(1) Amount. Two to 5 percent of inhaled atmosphere for induction of anesthesia; 0.5 to 2 percent for maintenance of anesthesia.1 1 These conditions have been reviewed by FDA and found effective...) Indications for use. For nonfood animals for the induction and maintenance of anesthesia.1 (3) Limitations...

21 CFR 529.1115 - Halothane.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Conditions of use—(1) Amount. Two to 5 percent of inhaled atmosphere for induction of anesthesia; 0.5 to 2 percent for maintenance of anesthesia.1 1 These conditions have been reviewed by FDA and found effective...) Indications for use. For nonfood animals for the induction and maintenance of anesthesia.1 (3) Limitations...

21 CFR 529.1115 - Halothane.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Conditions of use—(1) Amount. Two to 5 percent of inhaled atmosphere for induction of anesthesia; 0.5 to 2 percent for maintenance of anesthesia.1 1 These conditions have been reviewed by FDA and found effective...) Indications for use. For nonfood animals for the induction and maintenance of anesthesia.1 (3) Limitations...

21 CFR 529.1115 - Halothane.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Conditions of use—(1) Amount. Two to 5 percent of inhaled atmosphere for induction of anesthesia; 0.5 to 2 percent for maintenance of anesthesia.1 1 These conditions have been reviewed by FDA and found effective...) Indications for use. For nonfood animals for the induction and maintenance of anesthesia.1 (3) Limitations...

Stem cell maintenance by manipulating signaling pathways: past, current and future

PubMed Central

Chen, Xi; Ye, Shoudong; Ying, Qi-Long

2015-01-01

Pluripotent stem cells only exist in a narrow window during early embryonic development, whereas multipotent stem cells are abundant throughout embryonic development and are retainedin various adult tissues and organs. While pluripotent stem cell lines have been established from several species, including mouse, rat, and human, it is still challenging to establish stable multipotent stem cell lines from embryonic or adult tissues. Based on current knowledge, we anticipate that by manipulating extrinsic and intrinsic signaling pathways, most if not all types of stem cells can be maintained in a long-term culture. In this article, we summarize current culture conditions established for the long-term maintenance of authentic pluripotent and multipotent stem cells and the signaling pathways involved. We also discuss the general principles of stem cell maintenance and propose several strategies on the establishment of novel stem cell lines through manipulation of signaling pathways. [BMB Reports 2015; 48(12): 668-676] PMID:26497581

Design Patterns Application in the ERP Systems Improvements

NASA Astrophysics Data System (ADS)

Jovičić, Bojan; Vlajić, Siniša

Design patterns application have long been present in software engineering. The same is true for ERP systems in business software. Is it possible that ERP systems do not have a good maintenance score? We have found out that there is room for maintenance improvement and that it is possible to improve ERP systems using design patterns. We have conducted comparative analysis of ease of maintenance of the ERP systems. The results show that the average score for our questions is 64%, with most answers for ERP systems like SAP, Oracle EBS, Dynamics AX. We found that 59% of ERP system developer users are not familiar with design patterns. Based on this research, we have chosen Dynamics AX as the ERP system for examination of design patterns improvement possibilities. We used software metrics to measure improvement possibility. We found that we could increase the Conditional Complexity score 17-fold by introducing design patterns.

Emergence and maintenance of menopause in humans: A game theory model.

PubMed

Thouzeau, Valentin; Raymond, Michel

2017-10-07

Menopause, the permanent cessation of ovulation, occurs in women well before the end of their expected life span. Several adaptive hypotheses have been proposed to solve this evolutionary puzzle, each based on a possible fitness benefit derived from an early reproductive senescence, but no consensus has emerged. The construction of a game theory model allowed us to jointly study the main adaptive hypotheses in emergence and maintenance of menopause. Four classical hypotheses on the benefits of menopause were considered (decreased maternal mortality, increased grandmothering, decreased conflict over reproductive resources between older and younger females, and changes in their relatedness) plus a fifth one derived from a possible pleiotropic trade-off. Interestingly, the conditions for the emergence of menopause are more restrictive than those for its maintenance due to the social and familial changes induced by the occurrence of non-reproductive older women. Copyright © 2017 Elsevier Ltd. All rights reserved.

30 CFR 77.1004 - Ground control; inspection and maintenance; general.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Ground control; inspection and maintenance... OF UNDERGROUND COAL MINES Ground Control § 77.1004 Ground control; inspection and maintenance... unsafe ground conditions shall be corrected promptly, or the area shall be posted. ...

30 CFR 77.1004 - Ground control; inspection and maintenance; general.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Ground control; inspection and maintenance... OF UNDERGROUND COAL MINES Ground Control § 77.1004 Ground control; inspection and maintenance... unsafe ground conditions shall be corrected promptly, or the area shall be posted. ...

Hollow shaft integrated health monitoring system for railroad wheels

NASA Astrophysics Data System (ADS)

Frankenstein, B.; Hentschel, D.; Pridoehl, E.; Schubert, F.

2005-05-01

The economic efficiency and competitiveness of environment-friendly rail transportation depends on safety, availability and maintenance of single highly loaded structure components. Until now these components have been changed in fixed maintenance intervals irrespective of any usage related conditions. With the knowledge and evaluation of the component conditions, life cycle costs can be reduced by means of optimized maintenance and/or "fit for purpose" design. For example, rail-bound vehicle wheel sets are among the most highly stressed travelling gear components of the bogie. if such a component fails, a serious accident may occur. For this reason, a health monitoring system based on the interpretation of ultrasonic sound signatures has been developed. First, the ultrasonic waves generated by an artificial defect on the outer wheel tread of a railroad wheel towards an acoustic sensor, placed inside the hollow shaft of the railroad axis were simulated with a EFIT (Elastodynamic Finite Integration Technique). The results achieved proved that relevant signals can be found in a frequency range up to 300 kHz. Based on this a diagnostic unit was designed and built for application under rotation conditions, which consists of a piezo-electric sensor, primary electronics, an analog-to-digital converter, a digital signal processor, a trigger unit, and a telemetric transmitter. This diagnostic unit was integrated in the hollow shaft of a railroad wheel axis, a component of a special laboratory test rig. Algorithms which allow for the rotation-synchronized processing of acoustic signals were implemented into the rotating diagnostic unit. After successfully completing a campaign for this test rig, a second test was performed inside the wheel/railroad simulation test rig of the Deutsche Bahn AG under railroad-like conditions. The data generated inside the hollow shaft of the railroad wheel axis by the diagnostic unit were telemetrically transmitted to an industrial computer. The detection of artificial defects of different sizes is shown in correlation with theoretical assumptions.

Tools to support maintenance strategies under soft soil conditions

NASA Astrophysics Data System (ADS)

Lambert, J. W. M.; van Meerten, J. J.; Woning, M. P.; Eijbersen, M. J.; Huber, M.

2015-11-01

Costs for maintenance of infrastructure in municipalities with soft soil underground conditions, are estimated to be almost 40 % higher than in others. As a result, these municipalities meet financial problems that cause overdue maintenance. In some cases municipalities are even afraid to be unable to offer a minimum service level in future. In common, traditional practice, roads and sewerage systems have been constructed in trenches that consist of sandy material that replaces the upper meters of the soft soil. Under influence of its weight, this causes accelerated settlements of the construction. A number of alternative constructions have been developed, e.g. using light-weight materials to limit settlement velocity. In order to limit future maintenance costs, improvement of maintenance strategies is desired. Tools have been and will be developed to support municipalities in improving their maintenance strategies and save money by doing that. A model (BALANS) that weighs the attractiveness of alternative solutions under different soil, environmental and economic circumstances, will be presented.

Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet

NASA Technical Reports Server (NTRS)

Antolick, Lance J.; Branning, Jeremy S.; Wade, Daniel R.; Dempsey, Paula J.

2010-01-01

The U.S. Army is currently expanding its fleet of Health Usage Monitoring Systems (HUMS) equipped aircraft at significant rates, to now include over 1,000 rotorcraft. Two different on-board HUMS, the Honeywell Modern Signal Processing Unit (MSPU) and the Goodrich Integrated Vehicle Health Management System (IVHMS), are collecting vibration health data on aircraft that include the Apache, Blackhawk, Chinook, and Kiowa Warrior. The objective of this paper is to recommend the most effective gear condition indicators for fleet use based on both a theoretical foundation and field data. Gear diagnostics with better performance will be recommended based on both a theoretical foundation and results of in-fleet use. In order to evaluate the gear condition indicator performance on rotorcraft fleets, results of more than five years of health monitoring for gear faults in the entire HUMS equipped Army helicopter fleet will be presented. More than ten examples of gear faults indicated by the gear CI have been compiled and each reviewed for accuracy. False alarms indications will also be discussed. Performance data from test rigs and seeded fault tests will also be presented. The results of the fleet analysis will be discussed, and a performance metric assigned to each of the competing algorithms. Gear fault diagnostic algorithms that are compliant with ADS-79A will be recommended for future use and development. The performance of gear algorithms used in the commercial units and the effectiveness of the gear CI as a fault identifier will be assessed using the criteria outlined in the standards in ADS-79A-HDBK, an Army handbook that outlines the conversion from Reliability Centered Maintenance to the On-Condition status of Condition Based Maintenance.

Sex-specific neuroanatomical correlates of fear expression in prefrontal-amygdala circuits.

PubMed

Gruene, Tina M; Roberts, Elian; Thomas, Virginia; Ronzio, Ashley; Shansky, Rebecca M

2015-08-01

The neural projections from the infralimbic region of the prefrontal cortex to the amygdala are important for the maintenance of conditioned fear extinction. Neurons in this pathway exhibit a unique pattern of structural plasticity that is sex-dependent, but the relationship between the morphologic characteristics of these neurons and successful extinction in male and female subjects is unknown. Using classic cued fear conditioning and an extinction paradigm in large cohorts of male and female rats, we identified subpopulations of both sexes that exhibited high (HF) or low (LF) levels of freezing on an extinction retrieval test, representing failed or successful extinction maintenance, respectively. We combined retrograde tracing with fluorescent intracellular microinjections to perform three-dimensional reconstructions of infralimbic neurons that project to the basolateral amygdala in these groups. The HF and LF male rats exhibited neuroanatomical distinctions that were not observed in HF or LF female rats. A retrospective analysis of behavior during fear conditioning and extinction revealed that despite no overall sex differences in freezing behavior, HF and LF phenotypes emerged in male rats during extinction and in female rats during fear conditioning, which does not involve infralimbic-basolateral amygdala neurons. Our results suggest that the neural processes underlying successful or failed extinction maintenance may be sex-specific. These findings are relevant not only to future basic research on sex differences in fear conditioning and extinction but also to exposure-based clinical therapies, which are similar in premise to fear extinction and which are primarily used to treat disorders that are more common in women than in men. Copyright © 2015 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

Optimal Maintenance Works for the Aborshada Road in the Western Region of Libya

NASA Astrophysics Data System (ADS)

Youssef, Medhat Abdelrahman; Elbasher, Abdelbary Altayb

2014-09-01

In this research, the condition of a road pavement was investigated for the Aborshada Road in the Gharian region of Libya to determine the optimal maintenance works. Previously, a simple engineering judgment was the only procedure followed by the Gharian municipal engineers for evaluating pavements and prioritizing maintenance. The surface condition of the Aborshada Road pavement was investigated using "the Pavement Condition Index (PCI)" visual technique. The pavement was inspected to survey the different distresses in each sample unit. Ninteen pavement distresses were classified according to the PCI standards (PCI for roads and parking lots became an ASTM standard in 2007 (D6433-07)). It was necessary to know the most common distresses of the Aborshada Road to provide assistance for the decision maker in his evaluation of the pavement and the optimum repair method to be selected. This study reveals the actual performance of the pavements and suggests the research required for dealing with the pavement maintenance problem in Libya, especially in the western region. The best maintenance alternative for Aborshada Road was Case No. 3 (Potholes, Long. & Trans. Cracking and Alligator Crack Maintenance). Also, the most common pavement distresses on the Aborshada Road were Distress Nos. 1, 3, 6, 7, 10 and 13 according to the ASTM - D6433-07 classification

A probabilistic maintenance model for diesel engines

NASA Astrophysics Data System (ADS)

Pathirana, Shan; Abeygunawardane, Saranga Kumudu

2018-02-01

In this paper, a probabilistic maintenance model is developed for inspection based preventive maintenance of diesel engines based on the practical model concepts discussed in the literature. Developed model is solved using real data obtained from inspection and maintenance histories of diesel engines and experts' views. Reliability indices and costs were calculated for the present maintenance policy of diesel engines. A sensitivity analysis is conducted to observe the effect of inspection based preventive maintenance on the life cycle cost of diesel engines.

Maintenance percutaneous posterior nerve stimulation for refractory lower urinary tract symptoms in patients with multiple sclerosis: an open label, multicenter, prospective study.

PubMed

Zecca, C; Digesu, G A; Robshaw, P; Singh, A; Elneil, S; Gobbi, C

2014-03-01

Percutaneous tibial nerve stimulation is an effective second line therapy for lower urinary tract symptoms. Data on percutaneous tibial nerve stimulation maintenance treatment are scarce. In this study we evaluate its effectiveness and propose an algorithm of percutaneous tibial nerve stimulation maintenance treatment in patients with multiple sclerosis. In this prospective, multicenter, open label trial consecutive patients with multiple sclerosis and lower urinary tract symptoms unresponsive to medical therapy were treated with 12 weekly sessions of percutaneous tibial nerve stimulation. Responder patients (50% or greater improvement of lower urinary tract symptoms as measured by the patient perception of bladder condition questionnaire) entered a maintenance phase with individualized treatment frequency based on patient response. Lower urinary tract symptoms were assessed using a 3-day frequency volume chart, urodynamics and patient perception of bladder condition questionnaire. Treatment satisfaction was evaluated using a global response assessment scale and a treatment satisfaction visual analog scale. A total of 83 patients were included in the study and 74 (89%) responded to initial treatment. Persistent efficacy occurred in all initial responders after a mean treatment of 24 months. The greatest frequency of maintenance percutaneous tibial nerve stimulation was every 2 weeks. Lower urinary tract symptoms and patient treatment satisfaction improved with time compared to initial treatment (p <0.05). Bladder diary parameters and voiding parameters improved compared to baseline (p <0.05). Prolonged percutaneous tibial nerve stimulation treatment leads to a persistent improvement of lower urinary tract symptoms in patients with multiple sclerosis. Copyright © 2014 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Laboratory equipment maintenance contracts.

PubMed

Boudreau, D A; Scheer, W D; Catrou, P G

1985-12-01

The increasing level of technical sophistication and complexity found in clinical laboratory instrumentation today more than ever demands careful attention to maintenance service needs. The time-worn caution for careful definition of requirements for acquisition of a system should also carry over to acquisition of maintenance service. Guidelines are presented for specifications of terms and conditions for maintenance service from the perspective of the laboratorian in the automated clinical laboratory.

Identification of mine rescue equipment reduction gears technical condition

NASA Astrophysics Data System (ADS)

Gerike, B. L.; Klishin, V. I.; Kuzin, E. G.

2017-09-01

The article presents the reasons for adopting intelligent service of mine belt conveyer drives concerning evaluation of their technical condition based on the diagnostic techniques instead of regular preventative maintenance. The article reveals the diagnostic results of belt conveyer drive reduction gears condition taking into account the parameters of lubricating oil, vibration and temperature. Usage of a complex approach to evaluate technical conditions allows reliability of the forecast to be improved, which makes it possible not only to prevent accidental breakdowns and eliminate unscheduled downtime, but also to bring sufficient economic benefits through reduction of the term and scope of work during overhauls.

Non-Print Instructional Materials for the Air Conditioning and Refrigeration Maintenance Field.

ERIC Educational Resources Information Center

Golitko, Raymond L., Ed.; And Others

This catalog contains a listing of air conditioning/refrigeration maintenance audiovisual training materials from the Houston Community College System library media collection. The material is organized by subject heading. The media titles are listed in alphabetical order by title under each subject heading in the catalog. The citation for each…

Psychological Conditions of Engagement among Community College Maintenance Employees: A Cross-Sectional Study

ERIC Educational Resources Information Center

Franks, Tammy T.

2017-01-01

This dissertation examined the relationship between employee engagement and the factors that may influence the three psychological conditions of engagement: meaningfulness, safety, and availability for the sector of employees classified as maintenance, grounds, and custodial employees in a community college setting. The factors for each of the…

Sensitivity Study for Long Term Reliability

NASA Technical Reports Server (NTRS)

White, Allan L.

2008-01-01

This paper illustrates using Markov models to establish system and maintenance requirements for small electronic controllers where the goal is a high probability of continuous service for a long period of time. The system and maintenance items considered are quality of components, various degrees of simple redundancy, redundancy with reconfiguration, diagnostic levels, periodic maintenance, and preventive maintenance. Markov models permit a quantitative investigation with comparison and contrast. An element of special interest is the use of conditional probability to study the combination of imperfect diagnostics and periodic maintenance.

A method for accounting for maintenance costs in flux balance analysis improves the prediction of plant cell metabolic phenotypes under stress conditions.

PubMed

Cheung, C Y Maurice; Williams, Thomas C R; Poolman, Mark G; Fell, David A; Ratcliffe, R George; Sweetlove, Lee J

2013-09-01

Flux balance models of metabolism generally utilize synthesis of biomass as the main determinant of intracellular fluxes. However, the biomass constraint alone is not sufficient to predict realistic fluxes in central heterotrophic metabolism of plant cells because of the major demand on the energy budget due to transport costs and cell maintenance. This major limitation can be addressed by incorporating transport steps into the metabolic model and by implementing a procedure that uses Pareto optimality analysis to explore the trade-off between ATP and NADPH production for maintenance. This leads to a method for predicting cell maintenance costs on the basis of the measured flux ratio between the oxidative steps of the oxidative pentose phosphate pathway and glycolysis. We show that accounting for transport and maintenance costs substantially improves the accuracy of fluxes predicted from a flux balance model of heterotrophic Arabidopsis cells in culture, irrespective of the objective function used in the analysis. Moreover, when the new method was applied to cells under control, elevated temperature and hyper-osmotic conditions, only elevated temperature led to a substantial increase in cell maintenance costs. It is concluded that the hyper-osmotic conditions tested did not impose a metabolic stress, in as much as the metabolic network is not forced to devote more resources to cell maintenance. © 2013 The Authors The Plant Journal © 2013 John Wiley & Sons Ltd.

Soil and Water Indicators of the Sustainable Rangelands Roundtable

Treesearch

M.G. Sherm Karl; D.A. Pyke; P.T. Tueller; G.E. Schuman; R.W. Shafer; S.J. Borchard; D.T. Booth; W.G. Ypsilantis; R.H. Jr. Barrett

2006-01-01

The Sustainable Rangelands Roundtable (SRR) has explicitly included conservation and maintenance of soil and water resources as a criterion, a category of conditions or processes that can be assessed nationally to determine if the current level of rangeland management will ensure sustainability. Within the soil/water criterion, 10 indicators, 5 soil-based and 5 water-...

CH-47D Rotating System Fault Sensing for Condition Based Maintenance

DTIC Science & Technology

2011-03-01

replacement. This research seeks to create an analytical model in the Rotorcraft Comprehensive Analysis System which will enable the identifica- tion of...answer my many questions. Without your assistance and that of Dr. Jon Keller and Mr. Clayton Kachelle at AMRDEC, the Rotorcraft Comprehensive Analysis...20 3.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3.2 Rotorcraft Comprehensive Analysis

18 CFR 368.3 - Schedule of records and periods of retention.

Code of Federal Regulations, 2013 CFR

2013-04-01

... companies. (c) Paid checks and receipts for payments of specific vouchers 5 years. (d) Authorization for the... and reports of condition of property Destroy when superseded. Maintenance 13. Maintenance project and work orders: (a) Authorizations for expenditures for maintenance work to be covered by project or work...

18 CFR 368.3 - Schedule of records and periods of retention.

Code of Federal Regulations, 2014 CFR

2014-04-01

... companies. (c) Paid checks and receipts for payments of specific vouchers 5 years. (d) Authorization for the... and reports of condition of property Destroy when superseded. Maintenance 13. Maintenance project and work orders: (a) Authorizations for expenditures for maintenance work to be covered by project or work...

18 CFR 368.3 - Schedule of records and periods of retention.

Code of Federal Regulations, 2012 CFR

2012-04-01

... companies. (c) Paid checks and receipts for payments of specific vouchers 5 years. (d) Authorization for the... and reports of condition of property Destroy when superseded. Maintenance 13. Maintenance project and work orders: (a) Authorizations for expenditures for maintenance work to be covered by project or work...

30 CFR 57.8531 - Construction and maintenance of ventilation doors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Construction and maintenance of ventilation... NONMETAL MINES Ventilation Underground Only § 57.8531 Construction and maintenance of ventilation doors... constructed of wood; (c) Maintained in good condition; (d) Self-closing, if manually operated; and (e...

19 CFR 10.256 - Maintenance of records and submission of Certificate by importer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED... Certain Other Non-Textile Articles § 10.256 Maintenance of records and submission of Certificate by importer. (a) Maintenance of records. Each importer claiming preferential treatment for an article under...

19 CFR 10.256 - Maintenance of records and submission of Certificate by importer.

Code of Federal Regulations, 2013 CFR

2013-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED... Certain Other Non-Textile Articles § 10.256 Maintenance of records and submission of Certificate by importer. (a) Maintenance of records. Each importer claiming preferential treatment for an article under...

19 CFR 10.256 - Maintenance of records and submission of Certificate by importer.

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED... Certain Other Non-Textile Articles § 10.256 Maintenance of records and submission of Certificate by importer. (a) Maintenance of records. Each importer claiming preferential treatment for an article under...

19 CFR 10.256 - Maintenance of records and submission of Certificate by importer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED... Certain Other Non-Textile Articles § 10.256 Maintenance of records and submission of Certificate by importer. (a) Maintenance of records. Each importer claiming preferential treatment for an article under...

19 CFR 10.256 - Maintenance of records and submission of Certificate by importer.

Code of Federal Regulations, 2014 CFR

2014-04-01

... OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED... Certain Other Non-Textile Articles § 10.256 Maintenance of records and submission of Certificate by importer. (a) Maintenance of records. Each importer claiming preferential treatment for an article under...

Geophysical methods for road construction and maintenance

NASA Astrophysics Data System (ADS)

Rasul, Hedi; Karlson, Caroline; Jamali, Imran; Earon, Robert; Olofsson, Bo

2015-04-01

Infrastructure, such as road transportation, is a vital in civilized societies; which need to be constructed and maintained regularly. A large part of the project cost is attributed to subsurface conditions, where unsatisfactory conditions could increase either the geotechnical stabilization measures needed or the design cost itself. A way to collect information of the subsurface and existing installations which can lead to measures reducing the project cost and damage is to use geophysical methods during planning, construction and maintenance phases. The moisture in road layers is an important factor, which will affect the bearing capacity of the construction as well as the maintenances. Moisture in the road is a key factor for a well-functioning road. On the other hand the excessive moisture is the main reason of road failure and problems. From a hydrological point of view geophysical methods could help road planners identify the water table, geological strata, pollution arising from the road and the movement of the pollution before, during and after construction. Geophysical methods also allow road planners to collect valuable data for a large area without intrusive investigations such as with boreholes, i.e. minimizing the environmental stresses and costs. However, it is important to specify the investigation site and to choose the most appropriate geophysical method based on the site chosen and the objective of the investigation. Currently, numerous construction and rehabilitation projects are taking places around the world. Many of these projects are focused on infrastructural development, comprising both new projects and expansion of the existing infrastructural network. Geophysical methods can benefit these projects greatly during all phases. During the construction phase Ground Penetrating radar (GPR) is very useful in combination with Electrical Resistivity (ER) for detecting soil water content and base course compaction. However, ER and Electromagnetic (EM) methods can also be used for monitoring changes in water content and pollutant spreading during the maintenance phase. The objective of this study was to describe various geophysical methods which could benefit the road planning, construction and maintenance phases focusing on hydrological impacts.

Power Grid Maintenance Scheduling Intelligence Arrangement Supporting System Based on Power Flow Forecasting

NASA Astrophysics Data System (ADS)

Xie, Chang; Wen, Jing; Liu, Wenying; Wang, Jiaming

With the development of intelligent dispatching, the intelligence level of network control center full-service urgent need to raise. As an important daily work of network control center, the application of maintenance scheduling intelligent arrangement to achieve high-quality and safety operation of power grid is very important. By analyzing the shortages of the traditional maintenance scheduling software, this paper designs a power grid maintenance scheduling intelligence arrangement supporting system based on power flow forecasting, which uses the advanced technologies in maintenance scheduling, such as artificial intelligence, online security checking, intelligent visualization techniques. It implements the online security checking of maintenance scheduling based on power flow forecasting and power flow adjusting based on visualization, in order to make the maintenance scheduling arrangement moreintelligent and visual.

Maintenance of algal endosymbionts in Paramecium bursaria: a simple model based on population dynamics.

PubMed

Iwai, Sosuke; Fujiwara, Kenji; Tamura, Takuro

2016-09-01

Algal endosymbiosis is widely distributed in eukaryotes including many protists and metazoans, and plays important roles in aquatic ecosystems, combining phagotrophy and phototrophy. To maintain a stable symbiotic relationship, endosymbiont population size in the host must be properly regulated and maintained at a constant level; however, the mechanisms underlying the maintenance of algal endosymbionts are still largely unknown. Here we investigate the population dynamics of the unicellular ciliate Paramecium bursaria and its Chlorella-like algal endosymbiont under various experimental conditions in a simple culture system. Our results suggest that endosymbiont population size in P. bursaria was not regulated by active processes such as cell division coupling between the two organisms, or partitioning of the endosymbionts at host cell division. Regardless, endosymbiont population size was eventually adjusted to a nearly constant level once cells were grown with light and nutrients. To explain this apparent regulation of population size, we propose a simple mechanism based on the different growth properties (specifically the nutrient requirements) of the two organisms, and based from this develop a mathematical model to describe the population dynamics of host and endosymbiont. The proposed mechanism and model may provide a basis for understanding the maintenance of algal endosymbionts. © 2015 Society for Applied Microbiology and John Wiley & Sons Ltd.

Combination of process and vibration data for improved condition monitoring of industrial systems working under variable operating conditions

NASA Astrophysics Data System (ADS)

Ruiz-Cárcel, C.; Jaramillo, V. H.; Mba, D.; Ottewill, J. R.; Cao, Y.

2016-01-01

The detection and diagnosis of faults in industrial processes is a very active field of research due to the reduction in maintenance costs achieved by the implementation of process monitoring algorithms such as Principal Component Analysis, Partial Least Squares or more recently Canonical Variate Analysis (CVA). Typically the condition of rotating machinery is monitored separately using vibration analysis or other specific techniques. Conventional vibration-based condition monitoring techniques are based on the tracking of key features observed in the measured signal. Typically steady-state loading conditions are required to ensure consistency between measurements. In this paper, a technique based on merging process and vibration data is proposed with the objective of improving the detection of mechanical faults in industrial systems working under variable operating conditions. The capabilities of CVA for detection and diagnosis of faults were tested using experimental data acquired from a compressor test rig where different process faults were introduced. Results suggest that the combination of process and vibration data can effectively improve the detectability of mechanical faults in systems working under variable operating conditions.

45 CFR 310.20 - What are the conditions for funding the installation, operation, maintenance and enhancement of...

Code of Federal Regulations, 2010 CFR

2010-10-01

... installation, operation, maintenance and enhancement of Computerized Tribal IV-D Systems and Office Automation... HEALTH AND HUMAN SERVICES COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Funding for Computerized Tribal IV-D Systems and Office Automation § 310.20 What are the conditions for funding the installation...

9 CFR 71.4 - Maintenance of certain facilities and premises in a sanitary condition required; cleaning and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Maintenance of certain facilities and premises in a sanitary condition required; cleaning and disinfection, when required; animals classed as âexposed.â 71.4 Section 71.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE...

9 CFR 71.4 - Maintenance of certain facilities and premises in a sanitary condition required; cleaning and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Maintenance of certain facilities and premises in a sanitary condition required; cleaning and disinfection, when required; animals classed as âexposed.â 71.4 Section 71.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE...

9 CFR 71.4 - Maintenance of certain facilities and premises in a sanitary condition required; cleaning and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Maintenance of certain facilities and premises in a sanitary condition required; cleaning and disinfection, when required; animals classed as âexposed.â 71.4 Section 71.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE...

9 CFR 71.4 - Maintenance of certain facilities and premises in a sanitary condition required; cleaning and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Maintenance of certain facilities and premises in a sanitary condition required; cleaning and disinfection, when required; animals classed as âexposed.â 71.4 Section 71.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE...

9 CFR 71.4 - Maintenance of certain facilities and premises in a sanitary condition required; cleaning and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Maintenance of certain facilities and premises in a sanitary condition required; cleaning and disinfection, when required; animals classed as âexposed.â 71.4 Section 71.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE...

An energy budget agent-based model of earthworm populations and its application to study the effects of pesticides

PubMed Central

Johnston, A.S.A.; Hodson, M.E.; Thorbek, P.; Alvarez, T.; Sibly, R.M.

2014-01-01

Earthworms are important organisms in soil communities and so are used as model organisms in environmental risk assessments of chemicals. However current risk assessments of soil invertebrates are based on short-term laboratory studies, of limited ecological relevance, supplemented if necessary by site-specific field trials, which sometimes are challenging to apply across the whole agricultural landscape. Here, we investigate whether population responses to environmental stressors and pesticide exposure can be accurately predicted by combining energy budget and agent-based models (ABMs), based on knowledge of how individuals respond to their local circumstances. A simple energy budget model was implemented within each earthworm Eisenia fetida in the ABM, based on a priori parameter estimates. From broadly accepted physiological principles, simple algorithms specify how energy acquisition and expenditure drive life cycle processes. Each individual allocates energy between maintenance, growth and/or reproduction under varying conditions of food density, soil temperature and soil moisture. When simulating published experiments, good model fits were obtained to experimental data on individual growth, reproduction and starvation. Using the energy budget model as a platform we developed methods to identify which of the physiological parameters in the energy budget model (rates of ingestion, maintenance, growth or reproduction) are primarily affected by pesticide applications, producing four hypotheses about how toxicity acts. We tested these hypotheses by comparing model outputs with published toxicity data on the effects of copper oxychloride and chlorpyrifos on E. fetida. Both growth and reproduction were directly affected in experiments in which sufficient food was provided, whilst maintenance was targeted under food limitation. Although we only incorporate toxic effects at the individual level we show how ABMs can readily extrapolate to larger scales by providing good model fits to field population data. The ability of the presented model to fit the available field and laboratory data for E. fetida demonstrates the promise of the agent-based approach in ecology, by showing how biological knowledge can be used to make ecological inferences. Further work is required to extend the approach to populations of more ecologically relevant species studied at the field scale. Such a model could help extrapolate from laboratory to field conditions and from one set of field conditions to another or from species to species. PMID:25844009

Using Facility Condition Assessments to Identify Actions Related to Infrastructure

NASA Technical Reports Server (NTRS)

Rubert, Kennedy F.

2010-01-01

To support cost effective, quality research it is essential that laboratory and testing facilities are maintained in a continuous and reliable state of availability at all times. NASA Langley Research Center (LaRC) and its maintenance contractor, Jacobs Technology, Inc. Research Operations, Maintenance, and Engineering (ROME) group, are in the process of implementing a combined Facility Condition Assessment (FCA) and Reliability Centered Maintenance (RCM) program to improve asset management and overall reliability of testing equipment in facilities such as wind tunnels. Specific areas are being identified for improvement, the deferred maintenance cost is being estimated, and priority is being assigned against facilities where conditions have been allowed to deteriorate. This assessment serves to assist in determining where to commit available funds on the Center. RCM methodologies are being reviewed and enhanced to assure that appropriate preventive, predictive, and facilities/equipment acceptance techniques are incorporated to prolong lifecycle availability and assure reliability at minimum cost. The results from the program have been favorable, better enabling LaRC to manage assets prudently.

Sleep Deprivation Disrupts Recall of Conditioned Fear Extinction.

PubMed

Straus, Laura D; Acheson, Dean T; Risbrough, Victoria B; Drummond, Sean P A

2017-03-01

Learned fear is crucial in the development and maintenance of posttraumatic stress disorder (PTSD) and other anxiety disorders, and extinction of learned fear is necessary for response to exposure-based treatments. In humans, research suggests disrupted sleep impairs consolidation of extinction, though no studies have examined this experimentally using total sleep deprivation. Seventy-one healthy controls underwent a paradigm to acquire conditioned fear to a visual cue. Twenty-four hours after fear conditioning, participants underwent extinction learning. Twenty-four hours after extinction learning, participants underwent extinction recall. Participants were randomized to three groups: 1) well-rested throughout testing ("normal sleep"; n = 21); 2) 36 hours total sleep deprivation before extinction learning ("pre-extinction deprivation"; n = 25); or 3) 36 hours total sleep deprivation after extinction learning and before extinction recall ("post-extinction deprivation"; n = 25). The groups were compared on blink EMG reactivity to the condition stimulus during extinction learning and recall. There were no differences among the three groups during extinction learning. During extinction recall, the pre-extinction deprivation group demonstrated significantly less extinction recall than the normal sleep group. There was no significant difference between the normal sleep and post-extinction deprivation group during extinction recall. Results indicated sleep deprivation prior to extinction training significantly disrupts extinction recall. These findings suggest that (1) sleep deprivation in the immediate aftermath of trauma could be a potential contributor to PTSD development and maintenance via interference with natural extinction processes and (2) management of sleep symptoms should be considered during extinction-based therapy.

Development of performance-based evaluation methods and specifications for roadside maintenance.

DOT National Transportation Integrated Search

2011-01-01

This report documents the work performed during Project 0-6387, Performance Based Roadside : Maintenance Specifications. Quality assurance methods and specifications for roadside performance-based : maintenance contracts (PBMCs) were developed ...

An Assessment of South Carolina Higher Education Facilities Conditions & Measuring Deferred Maintenance. Special Report

ERIC Educational Resources Information Center

South Carolina Commission on Higher Education, 2007

2007-01-01

For the current study, institutions evaluated education and general (E&G) buildings on their campuses using an assessment format established in the original deferred maintenance study conducted in 1994. The joint study, "Deferred Maintenance, An Analysis of South Carolina's Facilities Portfolio," conducted by the Commission on Higher…

An Evaluation of the Reliability, Availability, Maintainability and Durability of the Utility Tactical Transport Aircraft System

DTIC Science & Technology

1980-01-01

specified condition. 10. Mean-Time-Between-Maintenance ( MTDM ). The mean of the distribution of the time intervals between all maintenance actions...which requires unscheduled maint. action. 3. MTDM : Mean-Time-Between-Maintenance. 4. W4I/OH: Maint Man-Hour/Engine Opbrating Hour S. CLASS III FAIURE

34 CFR 75.615 - Operation and maintenance by the grantee.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 1 2014-07-01 2014-07-01 false Operation and maintenance by the grantee. 75.615 Section 75.615 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What Conditions Must Be Met by a Grantee? Construction § 75.615 Operation and maintenance by the grantee. A...

30 CFR 74.10 - Operating and maintenance instructions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... storage instructions and a maintenance and service life plan with each new CPDM device sold. These... of how the CPDM works; (ii) A schematic diagram of the CPDM; (iii) Procedures for wearing and use of... functioning of the CPDM. (2) The maintenance and service life plan must address: (i) Conditions that should...

Effects of body lean and visual information on the equilibrium maintenance during stance.

PubMed

Duarte, Marcos; Zatsiorsky, Vladimir M

2002-09-01

Maintenance of equilibrium was tested in conditions when humans assume different leaning postures during upright standing. Subjects ( n=11) stood in 13 different body postures specified by visual center of pressure (COP) targets within their base of support (BOS). Different types of visual information were tested: continuous presentation of visual target, no vision after target presentation, and with simultaneous visual feedback of the COP. The following variables were used to describe the equilibrium maintenance: the mean of the COP position, the area of the ellipse covering the COP sway, and the resultant median frequency of the power spectral density of the COP displacement. The variability of the COP displacement, quantified by the COP area variable, increased when subjects occupied leaning postures, irrespective of the kind of visual information provided. This variability also increased when vision was removed in relation to when vision was present. Without vision, drifts in the COP data were observed which were larger for COP targets farther away from the neutral position. When COP feedback was given in addition to the visual target, the postural control system did not control stance better than in the condition with only visual information. These results indicate that the visual information is used by the postural control system at both short and long time scales.

Modeling and Simulation of HVAC Faulty Operations and Performance Degradation due to Maintenance Issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Liping; Hong, Tianzhen

Almost half of the total energy used in the U.S. buildings is consumed by heating, ventilation and air conditionings (HVAC) according to EIA statistics. Among various driving factors to energy performance of building, operations and maintenance play a significant role. Many researches have been done to look at design efficiencies and operational controls for improving energy performance of buildings, but very few study the impacts of HVAC systems maintenance. Different practices of HVAC system maintenance can result in substantial differences in building energy use. If a piece of HVAC equipment is not well maintained, its performance will degrade. If sensorsmore » used for control purpose are not calibrated, not only building energy usage could be dramatically increased, but also mechanical systems may not be able to satisfy indoor thermal comfort. Properly maintained HVAC systems can operate efficiently, improve occupant comfort, and prolong equipment service life. In the paper, maintenance practices for HVAC systems are presented based on literature reviews and discussions with HVAC engineers, building operators, facility managers, and commissioning agents. We categorize the maintenance practices into three levels depending on the maintenance effort and coverage: 1) proactive, performance-monitored maintenance; 2) preventive, scheduled maintenance; and 3) reactive, unplanned or no maintenance. A sampled list of maintenance issues, including cooling tower fouling, boiler/chiller fouling, refrigerant over or under charge, temperature sensor offset, outdoor air damper leakage, outdoor air screen blockage, outdoor air damper stuck at fully open position, and dirty filters are investigated in this study using field survey data and detailed simulation models. The energy impacts of both individual maintenance issue and combined scenarios for an office building with central VAV systems and central plant were evaluated by EnergyPlus simulations using three approaches: 1) direct modeling with EnergyPlus, 2) using the energy management system feature of EnergyPlus, and 3) modifying EnergyPlus source code. The results demonstrated the importance of maintenance for HVAC systems on energy performance of buildings. The research is intended to provide a guideline to help practitioners and building operators to gain the knowledge of maintaining HVAC systems in efficient operations, and prioritize HVAC maintenance work plan. The paper also discusses challenges of modeling building maintenance issues using energy simulation programs.« less

Building 9401-2 Plating Shop Surveillance and Maintenance Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1999-05-01

This document provides a plan for implementing surveillance and maintenance (S and M) activities to ensure that Building 9401-2 Plating Shop is maintained in a cost effective and environmentally secure configuration until subsequent closure during the final disposition phase of decommissioning. U.S. Department of Energy (DOE) G430.1A-2, Surveillance and Maintenance During Facility Disposition (1997), was used as guidance in the development of this plan. The S and M Plan incorporates DOE O 430.1A, Life Cycle Asset Management (LCAM) (1998a) direction to provide for conducting surveillance and maintenance activities required to maintain the facility and remaining hazardous and radioactive materials, wastes,more » and contamination in a stable and known condition pending facility disposition. Recommendations in the S and M plan have been made that may not be requirement-based but would reduce the cost and frequency of surveillance and maintenance activities. During the course of S and M activities, the facility's condition may change so as to present an immediate or developing hazard or unsatisfactory condition. Corrective action should be coordinated with the appropriate support organizations using the requirements and guidance stated in procedure Y10-202, Rev. 1, Integrated Safety Management Program, (Lockheed Martin Energy Systems, Inc. (LMES), 1998a) implemented at the Oak Ridge Y-12 Plant and the methodology of the Nuclear Operations Conduct of Operations Manual (LMES, 1999) for the Depleted Uranium Operations (DUO) organization. The key S and M objectives applicable to the Plating Shop are to: Ensure adequate containment of remaining residual material in exhaust stacks and outside process piping, stored chemicals awaiting offsite shipment, and items located in the Radioactive Material Area (RMA); Provide access control into the facility and physical safety to S and M personnel; Maintain the facility in a manner that will protect the public, the environment, and the S and M personnel; Provide an S and M plan which identifies and complies with applicable environmental, safety, and health safeguards and security requirements; and Provide a cost effective S and M program for the plating shop, Building 9401-2.« less

Jon Keller | NREL

Science.gov Websites

density and reliability while reducing operations and maintenance and deployment costs. Prior to joining condition monitoring systems for Army rotorcraft to reduce the cost and maintenance burdens while increasing

Effectiveness of Condition-Based Maintenance in Army Aviation

DTIC Science & Technology

2009-06-12

for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data ...sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this...increase in efficiency in dollars spent per operational flight hour, the data set was too small to draw major conclusions. Recommendations for

Architecting Integrated System Health Management for Airworthiness

DTIC Science & Technology

2013-09-01

aircraft safety and reliability through condition-based maintenance [Miller et al., 1991]. With the same motivation, Integrated System Health Management...diagnostics and prognostics algorithms. 2.2.2 Health and Usage Monitoring System (HUMS) in Helicopters Increased demand for improved operational safety ...offshore shuttle helicopters traversing the petrol installations in the North Sea, and increased demand for improved operational safety and reduced

Condition Based Maintenance Technology Impact Study: Assessment Methods, Study Design and Interim Results

DTIC Science & Technology

2014-07-01

Unified Theory of Acceptance and Use of Technology, Structuration Model of Technology, UNCLASSIFIED DSTO-TR-2992 UNCLASSIFIED 5 Adaptive...Structuration Theory , Model of Mutual Adaptation, Model of Technology Appropriation, Diffusion/Implementation Model, and Tri-core Model, among others [11...simulation gaming essay/scenario writing genius forecasting role play/acting backcasting swot brainstorming relevance tree/logic chart scenario workshop

Development of equations to predict dry matter intake of lactating cows using animal factors

USDA-ARS?s Scientific Manuscript database

Our objective was to model dry matter intake (DMI, kg) in Holstein dairy cows based on milk energy (MilkE, Mcal/d), energy required for maintenance, change in body weight (DeltaBW, kg/d), body condition score (BCS, scale 1 to 5), height (Htcm, cm), and parity. The database contained weekly DMI of 4,...

Development of a turbojet engine gearbox test rig for prognostics and health management

NASA Astrophysics Data System (ADS)

Rezaei, Aida; Dadouche, Azzedine

2012-11-01

Aircraft engine gearboxes represent one of the many critical systems/elements that require special attention for longer and safer operation. Reactive maintenance strategies are unsuitable as they usually imply higher repair costs when compared to condition based maintenance. This paper discusses the main prognostics and health management (PHM) approaches, describes a newly designed gearbox experimental facility and analyses preliminary data for gear prognosis. The test rig is designed to provide full capabilities of performing controlled experiments suitable for developing a reliable diagnostic and prognostic system. The rig is based on the accessory gearbox of the GE J85 turbojet engine, which has been slightly modified and reconfigured to replicate real operating conditions such as speeds and loads. Defect to failure tests (DTFT) have been run to evaluate the performance of the rig as well as to assess prognostic metrics extracted from sensors installed on the gearbox casing (vibration and acoustic). The paper also details the main components of the rig and describes the various challenges encountered. Successful DTFT results were obtained during an idle engine performance test and prognostic metrics associated with the sensor suite were evaluated and discussed.

Remote Structural Health Monitoring and Advanced Prognostics of Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas Brown; Bernard Laskowski

The prospect of substantial investment in wind energy generation represents a significant capital investment strategy. In order to maximize the life-cycle of wind turbines, associated rotors, gears, and structural towers, a capability to detect and predict (prognostics) the onset of mechanical faults at a sufficiently early stage for maintenance actions to be planned would significantly reduce both maintenance and operational costs. Advancement towards this effort has been made through the development of anomaly detection, fault detection and fault diagnosis routines to identify selected fault modes of a wind turbine based on available sensor data preceding an unscheduled emergency shutdown. Themore » anomaly detection approach employs spectral techniques to find an approximation of the data using a combination of attributes that capture the bulk of variability in the data. Fault detection and diagnosis (FDD) is performed using a neural network-based classifier trained from baseline and fault data recorded during known failure conditions. The approach has been evaluated for known baseline conditions and three selected failure modes: pitch rate failure, low oil pressure failure and a gearbox gear-tooth failure. Experimental results demonstrate the approach can distinguish between these failure modes and normal baseline behavior within a specified statistical accuracy.« less

Damage assessment using advanced non-intrusive inspection methods: integration of space, UAV, GPR, and field spectroscopy

NASA Astrophysics Data System (ADS)

Themistocleous, Kyriacos; Neocleous, Kyriacos; Pilakoutas, Kypros; Hadjimitsis, Diofantos G.

2014-08-01

The predominant approach for conducting road condition surveys and analyses is still largely based on extensive field observations. However, visual assessment alone cannot identify the actual extent and severity of damage. New non-invasive and cost-effective non-destructive (NDT) remote sensing technologies can be used to monitor road pavements across their life cycle, including remotely sensed aerial and satellite visual and thermal image (AI) data, Unmanned Aerial Vehicles (UAVs), Spectroscopy and Ground Penetrating Radar (GRP). These non-contact techniques can be used to obtain surface and sub-surface information about damage in road pavements, including the crack depth, and in-depth structural failure. Thus, a smart and cost-effective methodology is required that integrates several of these non-destructive/ no-contact techniques for the damage assessment and monitoring at different levels. This paper presents an overview of how an integration of the above technologies can be used to conduct detailed road condition surveys. The proposed approach can also be used to predict the future needs for road maintenance; this information is proven to be valuable to a strategic decision making tools that optimizes maintenance based on resources and environmental issues.

Evaluation of preventive maintenance treatments.

DOT National Transportation Integrated Search

2012-04-01

Scrub seals were placed in 2007 in Tallahatchie, Marshall, Carroll and Grenada Counties to evaluate their effectiveness and feasibility as preventive maintenance treatments. Condition data was collected and evaluated on the project sections.

Quantifying Channel Maintenance Instream Flows: An Approach for Gravel-Bed Streams in the Western United States

Treesearch

Larry J. Schmidt; John P. Potyondy

2004-01-01

This paper discusses one approach for quantifying channel maintenance instream flow necessary to achieve the Forest Service Organic Act purpose of securing favorable conditions of water flows. The approach is appropriate for quantifying channel maintenance flows on perennial, unregulated, snowmelt-dominated, gravel-bed streams with alluvial reaches. The approach...

29 CFR 1918.96 - Maintenance and repair work in the vicinity of longshoring operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... General Working Conditions. § 1918.96 Maintenance and repair work in the vicinity of longshoring... 29 Labor 7 2010-07-01 2010-07-01 false Maintenance and repair work in the vicinity of longshoring... operations shall not be carried on in the hold or on deck beneath work being conducted overhead whenever such...

CALiPER Report 20.4: Lumen and Chromaticity Maintenance of LED PAR38 Lamps Operated in Steady-State Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2014-12-30

This CALiPER report focuses on lumen maintenance, chromaticity maintenance, and catastrophic failure in 32 of the Series 20 LED PAR38 lamps and 8 benchmark lamps, which were monitored for nearly 14,000 hours at ambient temperatures between 44°C and 45°C.

36th Annual Maintenance & Operations Cost Study: Colleges

ERIC Educational Resources Information Center

Agron, Joe

2007-01-01

Colleges are focusing increased effort--and money--to improve the physical condition of existing facilities and address a huge backlog of deferred maintenance. According to "American School & University's" 36th annual Maintenance and Operations (M&O) Cost Study, the median college spends 16.4% of total college budget on M&O, up from 11% the year…

[Development and application of a medical device maintenance information platform based on BS architecture].

PubMed

Liu, Shenglin; Zhang, Xutian; Wang, Guohong; Zhang, Qiang

2012-03-01

Based on specified demands on medical devices maintenance for clinical engineers and Browser/Server architecture technology, a medical device maintenance information platform was developed, which implemented the following modules such as repair, preventive maintenance, accessories management, training, document, system management and regional cooperation. The characteristics of this system were summarized and application in increase of repair efficiency, improvement of preventive maintenance and cost control was introduced. The application of this platform increases medical device maintenance service level.

Compass 2008 data analysis and reporting.

DOT National Transportation Integrated Search

2008-11-01

The Compass Annual Report is issued each year to communicate the condition of Wisconsins state highway network : and to demonstrate accountability for maintenance expenditures. The primary audience for this report includes : Maintenance Supervisor...

29 CFR 1915.15 - Maintenance of safe conditions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment § 1915.15 Maintenance of safe... within a tested confined or enclosed space or other dangerous atmosphere occurs, work in the affected...

29 CFR 1915.15 - Maintenance of safe conditions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment § 1915.15 Maintenance of safe... within a tested confined or enclosed space or other dangerous atmosphere occurs, work in the affected...

29 CFR 1915.15 - Maintenance of safe conditions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment § 1915.15 Maintenance of safe... within a tested confined or enclosed space or other dangerous atmosphere occurs, work in the affected...

A programmatic approach to long-term bridge preventive maintenance.

DOT National Transportation Integrated Search

2016-04-15

State transportation agencies use cost-effective preventive maintenance (PM) programs to preserve existing roadway systems, slow down their deterioration, and improve their functional condition. Currently, KYTCs bridge inventory includes approxima...

Historical maintenance relevant information road-map for a self-learning maintenance prediction procedural approach

NASA Astrophysics Data System (ADS)

Morales, Francisco J.; Reyes, Antonio; Cáceres, Noelia; Romero, Luis M.; Benitez, Francisco G.; Morgado, Joao; Duarte, Emanuel; Martins, Teresa

2017-09-01

A large percentage of transport infrastructures are composed of linear assets, such as roads and rail tracks. The large social and economic relevance of these constructions force the stakeholders to ensure a prolonged health/durability. Even though, inevitable malfunctioning, breaking down, and out-of-service periods arise randomly during the life cycle of the infrastructure. Predictive maintenance techniques tend to diminish the appearance of unpredicted failures and the execution of needed corrective interventions, envisaging the adequate interventions to be conducted before failures show up. This communication presents: i) A procedural approach, to be conducted, in order to collect the relevant information regarding the evolving state condition of the assets involved in all maintenance interventions; this reported and stored information constitutes a rich historical data base to train Machine Learning algorithms in order to generate reliable predictions of the interventions to be carried out in further time scenarios. ii) A schematic flow chart of the automatic learning procedure. iii) Self-learning rules from automatic learning from false positive/negatives. The description, testing, automatic learning approach and the outcomes of a pilot case are presented; finally some conclusions are outlined regarding the methodology proposed for improving the self-learning predictive capability.

Determination of the bridge maintenance and rehabilitation priority scale in kabupaten Pinrang

NASA Astrophysics Data System (ADS)

Nurdin, Asrul; Kristiawan, S. A.; Dewi, Handayani

2017-01-01

This study attempts to get the support system to help stakeholders and the decision makers in the determination of priorities the maintenance and rehabilitation of the Bridge.The location of the study is done in Kabupaten Pinrang. Bridge damage value is specified using assessment standard Bridge Management System (BMS). There are 13 Bridges by details as follows: good condition with the condition 1 in 6 Bridge, damaged with the condition two as many as five fruit Bridges and there are two Bridges by value condition of three which means need handling rehabilitation. From our observation examination Bridges and it has been obtained the results of then afterward determined the priority scale by using the method Analytic Hierarchy Process. The discussion or interview of 27 respondents in completion question to determines the priorities of handling bridges by three (3) criteria and three sub- criteria with weights each: a condition of damage with weights 0,491 or amounting to 49,1 % followed by criteria policy with weights 0,324 % then criteria volume traffic weight of 0,185 or 18.5 %. Based on the results of this can be concluded that the implementation of a method of Analytic Hierarchy Processing is effective in determining the scale of priorities for the stakeholders. Having acquired value bridge condition and weights of the assessment results of the, then is needed to Analysis of spatial use application ArcGIS to obtain information condition Bridge Map.

Structural Health Monitoring with Fiber Bragg Grating and Piezo Arrays

NASA Technical Reports Server (NTRS)

Black, Richard J.; Faridian, Ferey; Moslehi, Behzad; Sotoudeh, Vahid

2012-01-01

Structural health monitoring (SHM) is one of the most important tools available for the maintenance, safety, and integrity of aerospace structural systems. Lightweight, electromagnetic-interference- immune, fiber-optic sensor-based SHM will play an increasing role in more secure air transportation systems. Manufacturers and maintenance personnel have pressing needs for significantly improving safety and reliability while providing for lower inspection and maintenance costs. Undetected or untreated damage may grow and lead to catastrophic structural failure. Damage can originate from the strain/stress history of the material, imperfections of domain boundaries in metals, delamination in multi-layer materials, or the impact of machine tools in the manufacturing process. Damage can likewise develop during service life from wear and tear, or under extraordinary circumstances such as with unusual forces, temperature cycling, or impact of flying objects. Monitoring and early detection are key to preventing a catastrophic failure of structures, especially when these are expected to perform near their limit conditions.

Requirements for plant coexistence through pollination niche partitioning

PubMed Central

Benadi, Gita

2015-01-01

Plant–pollinator interactions are often thought to have been a decisive factor in the diversification of flowering plants, but to be of little or no importance for the maintenance of existing plant diversity. In a recent opinion paper, Pauw (2013 Trends Ecol. Evol. 28, 30–37. (doi:10.1016/j.tree.2012.07.019)) challenged this view by proposing a mechanism of diversity maintenance based on pollination niche partitioning. In this article, I investigate under which conditions the mechanism suggested by Pauw can promote plant coexistence, using a mathematical model of plant and pollinator population dynamics. Numerical simulations show that this mechanism is most effective when the costs of searching for flowers are low, pollinator populations are strongly limited by resources other than pollen and nectar, and plant–pollinator interactions are sufficiently specialized. I review the empirical literature on these three requirements, discuss additional factors that may be important for diversity maintenance through pollination niche partitioning, and provide recommendations on how to detect this coexistence mechanism in natural plant communities. PMID:26108627

[The maintenance of automatic analysers and associated documentation].

PubMed

Adjidé, V; Fournier, P; Vassault, A

2010-12-01

The maintenance of automatic analysers and associated documentation taking part in the requirements of the ISO 15189 Standard and the French regulation as well have to be defined in the laboratory policy. The management of the periodic maintenance and documentation shall be implemented and fulfilled. The organisation of corrective maintenance has to be managed to avoid interruption of the task of the laboratory. The different recommendations concern the identification of materials including automatic analysers, the environmental conditions to take into account, the documentation provided by the manufacturer and documents prepared by the laboratory including procedures for maintenance.

A programmatic approach to long-term bridge preventive maintenance : final report.

DOT National Transportation Integrated Search

2016-04-01

State transportation agencies use cost-effective preventive maintenance (PM) programs to preserve existing roadway systems, slow down their deterioration, and improve their functional condition. Currently, KYTCs bridge inventory includes approxima...

Conditioned flavor avoidance as a measure of withdrawal in rats chronically exposed to a caffeine solution.

PubMed

Dreumont-Boudreau, Sarah E; Dingle, Rachel N; Alcolado, Gillian M; Lolordo, Vincent M

2008-09-03

Rats were given 21 days of chronic oral caffeine. A novel flavor (Maintenance CS) was then paired with the continuation of caffeine, and a second flavor (Withdrawal CS) was paired with caffeine removal. Rats avoided the Withdrawal CS, and drank more of the Maintenance CS in a two-bottle test, suggesting that removing caffeine had induced withdrawal. The value of the Maintenance CS was investigated by comparing it to a novel flavor paired with water (Neutral CS). In a series of two-bottle tests, the Maintenance and Neutral CSs were equivalent when pitted against each other, and both were preferred to the Withdrawal CS. These results demonstrate that conditioned flavor avoidance is a useful procedure in assessing caffeine withdrawal, and by inference dependence, produced by chronic oral consumption.

Solar energy system economic evaluation: Contemporary Newman, Georgia

NASA Technical Reports Server (NTRS)

1980-01-01

An economic evaluation of performance of the solar energy system (based on life cycle costs versus energy savings) for five cities considered to be representative of a broad range of environmental and economic conditions in the United States is discussed. The considered life cycle costs are: hardware, installation, maintenance, and operating costs for the solar unique components of the total system. The total system takes into consideration long term average environmental conditions, loads, fuel costs, and other economic factors applicable in each of five cities. Selection criteria are based on availability of long term weather data, heating degree days, cold water supply temperature, solar insolation, utility rates, market potential, and type of solar system.

Solar energy system economic evaluation: Contemporary Newman, Georgia

NASA Astrophysics Data System (ADS)

1980-09-01

An economic evaluation of performance of the solar energy system (based on life cycle costs versus energy savings) for five cities considered to be representative of a broad range of environmental and economic conditions in the United States is discussed. The considered life cycle costs are: hardware, installation, maintenance, and operating costs for the solar unique components of the total system. The total system takes into consideration long term average environmental conditions, loads, fuel costs, and other economic factors applicable in each of five cities. Selection criteria are based on availability of long term weather data, heating degree days, cold water supply temperature, solar insolation, utility rates, market potential, and type of solar system.

Critical Combat Performances, Knowledges, and Skills Required of the Infantry Rifle Squad Leader: Human Maintenance under Campaign Conditions.

ERIC Educational Resources Information Center

Brown, Frank L.; Jacobs, T. O.

The paper covers the performances, skills, and kinds of knowledge demanded of an infantry rifle squad leader to maintain an organized and effective fighting unit under campaign conditions and to set an example as a leader for his men. It covers personal hygiene and field sanitation, the maintenance of minimal fighting and existence loads, water…

The Maintenance of Heating, Ventilating and Air-Conditioning Systems and Indoor Air Quality in Schools: A Guide for School Facility Managers. Technical Bulletin.

ERIC Educational Resources Information Center

Wheeler, Arthur E.

To help maintain good indoor air quality (IAQ) in schools, guidance for the development and implementation of an effective program for maintenance and operation of heating, ventilating, and air-conditioning (HVAC) systems are discussed. Frequently, a building's occupants will complain about IAQ when the temperature or humidity are at uncomfortable…

Multidisciplinary Modelling of Symptoms and Signs with Archetypes and SNOMED-CT for Clinical Decision Support.

PubMed

Marco-Ruiz, Luis; Maldonado, J Alberto; Karlsen, Randi; Bellika, Johan G

2015-01-01

Clinical Decision Support Systems (CDSS) help to improve health care and reduce costs. However, the lack of knowledge management and modelling hampers their maintenance and reuse. Current EHR standards and terminologies can allow the semantic representation of the data and knowledge of CDSS systems boosting their interoperability, reuse and maintenance. This paper presents the modelling process of respiratory conditions' symptoms and signs by a multidisciplinary team of clinicians and information architects with the help of openEHR, SNOMED and clinical information modelling tools for a CDSS. The information model of the CDSS was defined by means of an archetype and the knowledge model was implemented by means of an SNOMED-CT based ontology.

Applying Lean to the F-15 Maintenance Process for the Royal Saudi Air Force

DTIC Science & Technology

2014-03-01

Royal Saudi Air Force. The research focuses on improving the F-15 maintenance process in the Royal Saudi Air Force’s Maintenance Squadrons. The F-15...and on the aircraft age condition, the researcher concludes it is time to get rid of some obstacles and use new management techniques to resolve the...processes? Research Focus This research is focusing on the Royal Saudi Air Force F-15 maintenance process. Because of the time and

Verification of recursive probabilistic integration (RPI) method for fatigue life management using non-destructive inspections

NASA Astrophysics Data System (ADS)

Chen, Tzikang J.; Shiao, Michael

2016-04-01

This paper verified a generic and efficient assessment concept for probabilistic fatigue life management. The concept is developed based on an integration of damage tolerance methodology, simulations methods1, 2, and a probabilistic algorithm RPI (recursive probability integration)3-9 considering maintenance for damage tolerance and risk-based fatigue life management. RPI is an efficient semi-analytical probabilistic method for risk assessment subjected to various uncertainties such as the variability in material properties including crack growth rate, initial flaw size, repair quality, random process modeling of flight loads for failure analysis, and inspection reliability represented by probability of detection (POD). In addition, unlike traditional Monte Carlo simulations (MCS) which requires a rerun of MCS when maintenance plan is changed, RPI can repeatedly use a small set of baseline random crack growth histories excluding maintenance related parameters from a single MCS for various maintenance plans. In order to fully appreciate the RPI method, a verification procedure was performed. In this study, MC simulations in the orders of several hundred billions were conducted for various flight conditions, material properties, and inspection scheduling, POD and repair/replacement strategies. Since the MC simulations are time-consuming methods, the simulations were conducted parallelly on DoD High Performance Computers (HPC) using a specialized random number generator for parallel computing. The study has shown that RPI method is several orders of magnitude more efficient than traditional Monte Carlo simulations.

Save a Penny, Lose a School: The Real Cost of Deferred Maintenance. Policy Brief Series on Rural Education.

ERIC Educational Resources Information Center

Lawrence, Barbara Kent

Deferring maintenance in small rural schools creates poor conditions that can affect the health and safety of everyone who uses the facility, damage the morale of students and teachers, impair their ability to teach and learn, and threaten the facility itself. Numerous recommendations for policy changes that affect maintenance are presented. A…

How performance-contingent reward prospect modulates cognitive control: Increased cue maintenance at the cost of decreased flexibility.

PubMed

Hefer, Carmen; Dreisbach, Gesine

2017-10-01

Growing evidence suggests that reward prospect promotes cognitive stability in terms of increased context or cue maintenance. In 3 Experiments, using different versions of the AX-continuous performance task, we investigated whether this reward effect comes at the cost of decreased cognitive flexibility. Experiment 1 shows that the reward induced increase of cue maintenance perseverates even when reward is no longer available. Experiment 2 shows that this reward effect not only survives the withdrawal of reward but also delays the adaptation to changed task conditions that make cue usage maladaptive. And finally in Experiment 3, it is shown that this reduced flexibility to adapt is observed in a more demanding modified version of the AX-continuous performance task and is even stronger under conditions of sustained reward. Taken together, all 3 Experiments thus speak to the idea that the prospect of reward increases cue maintenance and thereby cognitive stability. This increased cognitive stability however comes at the cost of decreased flexibility in terms of delayed adaptation to new reward and task conditions. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Landslide susceptibility mapping along PLUS expressways in Malaysia using probabilistic based model in GIS

NASA Astrophysics Data System (ADS)

Yusof, Norbazlan M.; Pradhan, Biswajeet

2014-06-01

PLUS Berhad holds the concession for a total of 987 km of toll expressways in Malaysia, the longest of which is the North-South Expressway or NSE. Acting as the backbone' of the west coast of the peninsula, the NSE stretches from the Malaysian-Thai border in the north to the border with neighbouring Singapore in the south, linking several major cities and towns along the way. North-South Expressway in Malaysia contributes to the country economic development through trade, social and tourism sector. Presently, the highway is good in terms of its condition and connection to every state but some locations need urgent attention. Stability of slopes at these locations is of most concern as any instability can cause danger to the motorist. In this paper, two study locations have been analysed; they are Gua Tempurung (soil slope) and Jelapang (rock slope) which are obviously having two different characteristics. These locations passed through undulating terrain with steep slopes where landslides are common and the probability of slope instability due to human activities in surrounding areas is high. A combination of twelve (12) landslide conditioning factors database on slope stability such as slope degree and slope aspect were extracted from IFSAR (interoferometric synthetic aperture radar) while landuse, lithology and structural geology were constructed from interpretation of high resolution satellite data from World View II, Quickbird and Ikonos. All this information was analysed in geographic information system (GIS) environment for landslide susceptibility mapping using probabilistic based frequency ratio model. Consequently, information on the slopes such as inventories, condition assessments and maintenance records were assessed through total expressway maintenance management system or better known as TEMAN. The above mentioned system is used by PLUS as an asset management and decision support tools for maintenance activities along the highways as well as for data quality checking and integrity. In this study, TEMAN data were further analysed and subsequently integrated with landslide susceptible map for Gua Tempurung and Jelapang area in Perak.

Maintenance Effects of an Evidence-Based Prevention Innovation for Aggressive Children Living in Culturally Diverse Urban Neighborhoods: The Early Risers Effectiveness Study

ERIC Educational Resources Information Center

August, Gerald J.; Lee, Susanne S.; Bloomquist, Michael L.; Realmuto, George M.; Hektner, Joel M.

2004-01-01

The present study assessed the ability of the Early Risers' Skills for Success Program to maintain program effects 1 year post intervention. Participants were 327 kindergarten and first-grade children who screened positive for aggressive behavior and who were randomized to program and control conditions. Program children participated in 2…

Modeling of Engine Parameters for Condition-Based Maintenance of the MTU Series 2000 Diesel Engine

DTIC Science & Technology

2016-09-01

are suitable. To model the behavior of the engine, an autoregressive distributed lag (ARDL) time series model of engine speed and exhaust gas... time series model of engine speed and exhaust gas temperature is derived. The lag length for ARDL is determined by whitening of residuals using the...15 B. REGRESSION ANALYSIS ....................................................................15 1. Time Series Analysis

Asphalt pavement maintenance field handbook

DOT National Transportation Integrated Search

2001-04-01

This field manual provides guidelines for preventive asphalt pavement maintenance techniques for a variety of distresses and conditions. It covers: 1. crack treatments (clean and seal, rout and seal, full-depth crack repair); 2. surface treatments (f...

Microsensors to monitor missile storage and maintenance needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mee, D.K.; Thundat, T.G.; Oden, P.I.

1997-10-30

Accurate assessments of reliability and condition based maintenance can only be implemented where a good understanding of ammunition stockpile condition exists. Use of miniaturized intelligent sensors provides an inexpensive means of nondestructively gaining insight into stockpile condition while keeping costs low. In the past, evaluation of ammunition lifetimes has utilized humidity, temperature, pressure, shock, and corrosion. New technologies provide the possibility of obtaining these environmental parameters, as well as a number of other indicators of propellant degradation, including NOx by utilizing a microsensor with capability for remote wireless monitoring. Micro-electro-mechanical systems (MEMS) like microcantilevers promise to revolutionize the field ofmore » sensor design. In the automobile industry, micromachined acceleration sensors are now used for triggering airbags and pressure sensors adjust the air-fuel intake ratio in the engine. By applying coatings to the sensor`s surface the behavior of the microdevice can be measurably altered to respond to chemical species as demonstrated by ORNL using microcantilevers to detect mercury vapor and humidity. Ultimately, single-chip detectors with electronics and telemetry could be developed with conceivably hundreds of individual microsensors on each chip to simultaneously monitor identify, and quantify many important chemical species for ammunition as well as measure environmental parameters.« less

New approaches to addiction treatment based on learning and memory.

PubMed

Kiefer, Falk; Dinter, Christina

2013-01-01

Preclinical studies suggest that physiological learning processes are similar to changes observed in addicts at the molecular, neuronal, and structural levels. Based on the importance of classical and instrumental conditioning in the development and maintenance of addictive disorders, many have suggested cue-exposure-based extinction training of conditioned, drug-related responses as a potential new treatment of addiction. It may also be possible to facilitate this extinction training with pharmacological compounds that strengthen memory consolidation during cue exposure. Another potential therapeutic intervention would be based on the so-called reconsolidation theory. According to this hypothesis, already-consolidated memories return to a labile state when reactivated, allowing them to undergo another phase of consolidation-reconsolidation, which can be pharmacologically manipulated. These approaches suggest that the extinction of drug-related memories may represent a viable treatment strategy in the future treatment of addiction.

Optimizing preventive maintenance policy: A data-driven application for a light rail braking system.

PubMed

Corman, Francesco; Kraijema, Sander; Godjevac, Milinko; Lodewijks, Gabriel

2017-10-01

This article presents a case study determining the optimal preventive maintenance policy for a light rail rolling stock system in terms of reliability, availability, and maintenance costs. The maintenance policy defines one of the three predefined preventive maintenance actions at fixed time-based intervals for each of the subsystems of the braking system. Based on work, maintenance, and failure data, we model the reliability degradation of the system and its subsystems under the current maintenance policy by a Weibull distribution. We then analytically determine the relation between reliability, availability, and maintenance costs. We validate the model against recorded reliability and availability and get further insights by a dedicated sensitivity analysis. The model is then used in a sequential optimization framework determining preventive maintenance intervals to improve on the key performance indicators. We show the potential of data-driven modelling to determine optimal maintenance policy: same system availability and reliability can be achieved with 30% maintenance cost reduction, by prolonging the intervals and re-grouping maintenance actions.

Optimizing preventive maintenance policy: A data-driven application for a light rail braking system

PubMed Central

Corman, Francesco; Kraijema, Sander; Godjevac, Milinko; Lodewijks, Gabriel

2017-01-01

This article presents a case study determining the optimal preventive maintenance policy for a light rail rolling stock system in terms of reliability, availability, and maintenance costs. The maintenance policy defines one of the three predefined preventive maintenance actions at fixed time-based intervals for each of the subsystems of the braking system. Based on work, maintenance, and failure data, we model the reliability degradation of the system and its subsystems under the current maintenance policy by a Weibull distribution. We then analytically determine the relation between reliability, availability, and maintenance costs. We validate the model against recorded reliability and availability and get further insights by a dedicated sensitivity analysis. The model is then used in a sequential optimization framework determining preventive maintenance intervals to improve on the key performance indicators. We show the potential of data-driven modelling to determine optimal maintenance policy: same system availability and reliability can be achieved with 30% maintenance cost reduction, by prolonging the intervals and re-grouping maintenance actions. PMID:29278245

Assessment of highway pavements using GPR

NASA Astrophysics Data System (ADS)

Plati, Christina; Loizos, Andreas

2015-04-01

Highway infrastructure is a prerequisite for a functioning economy and social life. Highways, often prone to congestion and disruption, are one of the aspects of a modern transport network that require maximum efficiency if an integrated transport network, and sustainable mobility, is to be achieved. Assessing the condition of highway structures, to plan subsequent maintenance, is essential to allow the long-term functioning of a road network. Optimizing the methods used for such assessment will lead to better information being obtained about the road and underlying ground conditions. The condition of highway structures will be affected by a number of factors, including the properties of the highway pavement, the supporting sub-base and the subgrade (natural ground), and the ability to obtain good information about the entire road structure, from pavement to subgrade, allows appropriate maintenance programs to be planned. The maintenance of highway pavements causes considerable cost and in many cases obstruction to traffic flow. In this situation, methods that provide information on the present condition of pavement structure non-destructively and economically are of great interest. It has been shown that Ground-Penetrating-Radar (GPR), which is a Non Destructive Technique (NDT), can deliver information that is useful for the planning of pavement maintenance activities. More specifically GPR is used by pavement engineers in order to determine physical properties and characteristics of the pavement structure, information that is valuable for the assessment of pavement condition. This work gives an overview on the practical application of GPR using examples from highway asphalt pavements monitoring. The presented individual applications of GPR pavement diagnostics concern structure homogeneity, thickness of pavement layers, dielectric properties of asphalt materials etc. It is worthwhile mentioning that a number of applications are standard procedures, either separately or in combination with other NDT methods, but even for them there is still a room for improvement and there is still need to set stricter regulations Comparisons between radar results and ground truth data produce evidence in support of the statement that the accuracy and reliability of radar results is sufficient for facing many issues related to the evaluation of asphalt pavements. Thus, benefits and limits of this method are shown and recommendations for GPR inspections are presented. Acknowledgments: This work benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar."

The prediction of the residual life of electromechanical equipment based on the artificial neural network

NASA Astrophysics Data System (ADS)

Zhukovskiy, Yu L.; Korolev, N. A.; Babanova, I. S.; Boikov, A. V.

2017-10-01

This article is devoted to the prediction of the residual life based on an estimate of the technical state of the induction motor. The proposed system allows to increase the accuracy and completeness of diagnostics by using an artificial neural network (ANN), and also identify and predict faulty states of an electrical equipment in dynamics. The results of the proposed system for estimation the technical condition are probability technical state diagrams and a quantitative evaluation of the residual life, taking into account electrical, vibrational, indirect parameters and detected defects. Based on the evaluation of the technical condition and the prediction of the residual life, a decision is made to change the control of the operating and maintenance modes of the electric motors.

Optimization of flowrate for expansion of human embryonic stem cells in perfusion microbioreactors.

PubMed

Titmarsh, Drew; Hidalgo, Alejandro; Turner, Jennifer; Wolvetang, Ernst; Cooper-White, Justin

2011-12-01

Microfluidic systems create significant opportunities to establish highly controlled microenvironmental conditions for screening pluripotent stem cell fate. However, since cell fate is crucially dependent on this microenvironment, it remains unclear as to whether continual perfusion of culture medium supports pluripotent stem cell maintenance in feeder-free, chemically defined conditions, and further, whether optimum perfusion conditions exist for subsequent use of human embryonic stem cell (hESCs) in other microfludic systems. To investigate this, we designed microbioreactors based on resistive flow to screen hESCs under a linear range of flowrates. We report that at low rates (conditions where glucose transport is convection-limited with Péclet number <1), cells are affected by apparent nutrient depletion and waste accumulation, evidenced by reduced cell expansion and altered morphology. At higher rates, cells are spontaneously washed out, and display morphological changes which may be indicative of early-stage differentiation. However, between these thresholds exists a narrow range of flowrates in which hESCs expand comparably to the equivalent static culture system, with regular morphology and maintenance of the pluripotency marker TG30 in >95% of cells over 7 days. For MEL1 hESCs the optimum flowrate also coincided with the time-averaged medium exchange rate in static cultures, which may therefore provide a good first estimate of appropriate perfusion rates. Overall, we demonstrate hESCs can be maintained in microbioreactors under continual flow for up to 7 days, a critical outcome for the future development of microbioreactor-based screening systems and assays for hESC culture. Copyright © 2011 Crown in the right of Canada.

A motivation-focused weight loss maintenance program is an effective alternative to a skill-based approach.

PubMed

West, D S; Gorin, A A; Subak, L L; Foster, G; Bragg, C; Hecht, J; Schembri, M; Wing, R R

2011-02-01

Maintaining weight loss is a major challenge in obesity treatment. Individuals often indicate that waning motivation prompts cessation of effective weight management behaviors. Therefore, a novel weight loss maintenance program that specifically targets motivational factors was evaluated. Overweight women (N=338; 19% African American) with urinary incontinence were randomized to lifestyle obesity treatment or control and followed for 18 months. All participants in lifestyle (N=226) received the same initial 6-month group behavioral obesity treatment and were then randomized to (1) a novel motivation-focused maintenance program (N=113) or (2) a standard skill-based maintenance approach (N=113). Weight assessed at baseline, 6 and 18 months. Both treatment groups (motivation-focused and skill-based) achieved comparable 18-month weight losses (-5.48% for motivation-focused vs -5.55% in skill-based, P=0.98), and both groups lost significantly more than controls (-1.51%; P=0.0012 in motivation-focused and P=0.0021 in skill-based). A motivation-focused maintenance program offers an alternative, effective approach to weight maintenance expanding available evidence-based interventions beyond traditional skill-based programs.

LTPP distress identification manual sets a standard for states

DOT National Transportation Integrated Search

2002-01-01

A brief note about the usefulness of the LTPP program's Distress Identification Manual in helping States with their pavement management and maintenance activities. Accurate reports of pavement conditions are crucial to pavement management and mainten...

Lunar robotic maintenance module

NASA Technical Reports Server (NTRS)

Ayres, Michael L.

1988-01-01

A design for a robotic maintenance module that will assist a mobile 100-meter lunar drill is introduced. The design considers the following areas of interest: the atmospheric conditions, actuator systems, power supply, material selection, weight, cooling system and operation.

Civil helicopter propulsion system reliability and engine monitoring technology assessments

NASA Technical Reports Server (NTRS)

Murphy, J. A.; Zuk, J.

1982-01-01

A study to reduce operating costs of helicopters, particularly directed at the maintenance of the propulsion subsystem, is presented. The tasks of the study consisted of problem definition refinement, technology solutions, diagnostic system concepts, and emergency power augmentation. Quantifiable benefits (reduced fuel consumption, on-condition engine maintenance, extended drive system overhaul periods, and longer oil change intervals) would increase the initial cost by $43,000, but the benefit of $24.46 per hour would result in breakeven at 1758 hours. Other benefits not capable of being quantified but perhaps more important include improved aircraft avilability due to reduced maintenance time, potential for increased operating limits due to continuous automatic monitoring of gages, and less time and fuel required to make engine power checks. The most important improvement is the on-condition maintenance program, which will require the development of algorithms, equipment, and procedures compatible with all operating environments.

Comparision of Incidental Reflection From Containerized Maintenance/Housekeeping Solutions and One Inch of Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapman, Bryan Scott; MacQuigg, Michael Robert; Wysong, Andrew Russell

This document addresses the incidental reflector reactivity worth of containerized maintenance/housekeeping fluids for use in PF-4 at Los Alamos National Laboratory (LANL). The intent of the document is to analyze containerized maintenance/housekeeping fluids which will be analyzed as water that may be present under normal conditions of an operation. The reactivity worth is compared to the reactivity worth due to I-inch of close-fitting 4n water reflection and I-inch of close-fitting radial water reflection. Both have been used to bound incidental reflection by 2-liter bottles in criticality safety evaluations. The conclusion is that, when the maintenance/housekeeping fluids are containerized the reactivitymore » increase from a configuration which is bounding of normal conditions (up to eight bottles modeled with 2-liters of solution at varying diameter) is bound by I-inch of close fitting 4n water relection.« less

[Medical Equipment Maintenance Methods].

PubMed

Liu, Hongbin

2015-09-01

Due to the high technology and the complexity of medical equipment, as well as to the safety and effectiveness, it determines the high requirements of the medical equipment maintenance work. This paper introduces some basic methods of medical instrument maintenance, including fault tree analysis, node method and exclusive method which are the three important methods in the medical equipment maintenance, through using these three methods for the instruments that have circuit drawings, hardware breakdown maintenance can be done easily. And this paper introduces the processing methods of some special fault conditions, in order to reduce little detours in meeting the same problems. Learning is very important for stuff just engaged in this area.

Inflammation in Fear- and Anxiety-Based Disorders: PTSD, GAD, and Beyond.

PubMed

Michopoulos, Vasiliki; Powers, Abigail; Gillespie, Charles F; Ressler, Kerry J; Jovanovic, Tanja

2017-01-01

The study of inflammation in fear- and anxiety-based disorders has gained interest as growing literature indicates that pro-inflammatory markers can directly modulate affective behavior. Indeed, heightened concentrations of inflammatory signals, including cytokines and C-reactive protein, have been described in posttraumatic stress disorder (PTSD), generalized anxiety disorder (GAD), panic disorder (PD), and phobias (agoraphobia, social phobia, etc.). However, not all reports indicate a positive association between inflammation and fear- and anxiety-based symptoms, suggesting that other factors are important in future assessments of inflammation's role in the maintenance of these disorders (ie, sex, co-morbid conditions, types of trauma exposure, and behavioral sources of inflammation). The most parsimonious explanation of increased inflammation in PTSD, GAD, PD, and phobias is via the activation of the stress response and central and peripheral immune cells to release cytokines. Dysregulation of the stress axis in the face of increased sympathetic tone and decreased parasympathetic activity characteristic of anxiety disorders could further augment inflammation and contribute to increased symptoms by having direct effects on brain regions critical for the regulation of fear and anxiety (such as the prefrontal cortex, insula, amygdala, and hippocampus). Taken together, the available data suggest that targeting inflammation may serve as a potential therapeutic target for treating these fear- and anxiety-based disorders in the future. However, the field must continue to characterize the specific role pro-inflammatory signaling in the maintenance of these unique psychiatric conditions.

Inflammation in Fear- and Anxiety-Based Disorders: PTSD, GAD, and Beyond

PubMed Central

Michopoulos, Vasiliki; Powers, Abigail; Gillespie, Charles F; Ressler, Kerry J; Jovanovic, Tanja

2017-01-01

The study of inflammation in fear- and anxiety-based disorders has gained interest as growing literature indicates that pro-inflammatory markers can directly modulate affective behavior. Indeed, heightened concentrations of inflammatory signals, including cytokines and C-reactive protein, have been described in posttraumatic stress disorder (PTSD), generalized anxiety disorder (GAD), panic disorder (PD), and phobias (agoraphobia, social phobia, etc.). However, not all reports indicate a positive association between inflammation and fear- and anxiety-based symptoms, suggesting that other factors are important in future assessments of inflammation's role in the maintenance of these disorders (ie, sex, co-morbid conditions, types of trauma exposure, and behavioral sources of inflammation). The most parsimonious explanation of increased inflammation in PTSD, GAD, PD, and phobias is via the activation of the stress response and central and peripheral immune cells to release cytokines. Dysregulation of the stress axis in the face of increased sympathetic tone and decreased parasympathetic activity characteristic of anxiety disorders could further augment inflammation and contribute to increased symptoms by having direct effects on brain regions critical for the regulation of fear and anxiety (such as the prefrontal cortex, insula, amygdala, and hippocampus). Taken together, the available data suggest that targeting inflammation may serve as a potential therapeutic target for treating these fear- and anxiety-based disorders in the future. However, the field must continue to characterize the specific role pro-inflammatory signaling in the maintenance of these unique psychiatric conditions. PMID:27510423

Maintenance of an obstruction-forced pool in a gravel-bed channel: streamflow, channel morphology, and sediment transport.

Treesearch

Richard D. Woodsmith; Marwan A. Hassan

2005-01-01

Maintenance of pool morphology in a stream channel with a mobile bed requires hydraulic conditions at moderate to high flows that route bed load through the pool as it is delivered from upstream. Through field measurements of discharge, vertical velocity profiles, bed load transport, and streambed scour, fill, and grain-size distribution, we found that maintenance of a...

Costs of performance based maintenance for local roads: Case study Albania

NASA Astrophysics Data System (ADS)

Jokanović, Igor; Grujić, Bojana; Zeljić, Dragana; Grujić, Žarko; Svilar, Mila

2017-12-01

The provision and maintenance of road infrastructure is a major global business, consequently it is essential that road maintenance services are provided in the most cost effective manner. Without regular maintenance, roads can rapidly fall into disrepair, preventing realization of the longer term impacts of road improvements on development, such as increased agricultural production and growth in school enrollment, which is of particular importance for a network of local (access) roads. Inadequate local roads maintenance in Albania is proposed to be solved by implementing performance based maintenance approach for which the costing exercise is presented within the paper.

Resist diabetes: A randomized clinical trial for resistance training maintenance in adults with prediabetes

PubMed Central

Davy, Brenda M.; Winett, Richard A.; Savla, Jyoti; Marinik, Elaina L.; Baugh, Mary Elizabeth; Flack, Kyle D.; Halliday, Tanya M.; Kelleher, Sarah A.; Winett, Sheila G.; Williams, David M.; Boshra, Soheir

2017-01-01

Objective To determine whether a social cognitive theory (SCT)-based intervention improves resistance training (RT) maintenance and strength, and reduces prediabetes prevalence. Research design and methods Sedentary, overweight/obese (BMI: 25–39.9 kg/m2) adults aged 50–69 (N = 170) with prediabetes participated in the 15-month trial. Participants completed a supervised 3-month RT (2×/wk) phase and were randomly assigned (N = 159) to one of two 6-month maintenance conditions: SCT or standard care. Participants continued RT at a self-selected facility. The final 6-month period involved no contact. Assessments occurred at baseline and months 3, 9, and 15. The SCT faded-contact intervention consisted of nine tailored transition (i.e., supervised training to training alone) and nine follow-up sessions. Standard care involved six generic follow-up sessions. Primary outcomes were prevalence of normoglycemia and muscular strength. Results The retention rate was 76%. Four serious adverse events were reported. After 3 months of RT, 34% of participants were no longer prediabetic. This prevalence of normoglycemia was maintained through month 15 (30%), with no group difference. There was an 18% increase in the odds of being normoglycemic for each % increase in fat-free mass. Increases in muscular strength were evident at month 3 and maintained through month 15 (P<0.001), which represented improvements of 21% and 14% for chest and leg press, respectively. Results did not demonstrate a greater reduction in prediabetes prevalence in the SCT condition. Conclusions Resistance training is an effective, maintainable strategy for reducing prediabetes prevalence and increasing muscular strength. Future research which promotes RT initiation and maintenance in clinical and community settings is warranted. Trial Registration ClinicalTrials.gov NCT01112709. PMID:28231265

Resist diabetes: A randomized clinical trial for resistance training maintenance in adults with prediabetes.

PubMed

Davy, Brenda M; Winett, Richard A; Savla, Jyoti; Marinik, Elaina L; Baugh, Mary Elizabeth; Flack, Kyle D; Halliday, Tanya M; Kelleher, Sarah A; Winett, Sheila G; Williams, David M; Boshra, Soheir

2017-01-01

To determine whether a social cognitive theory (SCT)-based intervention improves resistance training (RT) maintenance and strength, and reduces prediabetes prevalence. Sedentary, overweight/obese (BMI: 25-39.9 kg/m2) adults aged 50-69 (N = 170) with prediabetes participated in the 15-month trial. Participants completed a supervised 3-month RT (2×/wk) phase and were randomly assigned (N = 159) to one of two 6-month maintenance conditions: SCT or standard care. Participants continued RT at a self-selected facility. The final 6-month period involved no contact. Assessments occurred at baseline and months 3, 9, and 15. The SCT faded-contact intervention consisted of nine tailored transition (i.e., supervised training to training alone) and nine follow-up sessions. Standard care involved six generic follow-up sessions. Primary outcomes were prevalence of normoglycemia and muscular strength. The retention rate was 76%. Four serious adverse events were reported. After 3 months of RT, 34% of participants were no longer prediabetic. This prevalence of normoglycemia was maintained through month 15 (30%), with no group difference. There was an 18% increase in the odds of being normoglycemic for each % increase in fat-free mass. Increases in muscular strength were evident at month 3 and maintained through month 15 (P<0.001), which represented improvements of 21% and 14% for chest and leg press, respectively. Results did not demonstrate a greater reduction in prediabetes prevalence in the SCT condition. Resistance training is an effective, maintainable strategy for reducing prediabetes prevalence and increasing muscular strength. Future research which promotes RT initiation and maintenance in clinical and community settings is warranted. ClinicalTrials.gov NCT01112709.

A cluster-analytic profiling of heroin-dependent patients based on level, clinical adequacy, and patient-desired adjustment of buprenorphine dosage during buprenorphine-naloxone maintenance treatment in sixteen Spanish centers.

PubMed

Alcaraz, Saul; González-Saiz, Francisco; Trujols, Joan; Vergara-Moragues, Esperanza; Siñol, Núria; Pérez de Los Cobos, José

2018-06-01

Buprenorphine dosage is a crucial factor influencing outcomes of buprenorphine treatment for heroin use disorders. Therefore, the aim of the present study is to identify naturally occurring profiles of heroin-dependent patients regarding individualized management of buprenorphine dosage in clinical practice of buprenorphine-naloxone maintenance treatment. 316 patients receiving buprenorphine-naloxone maintenance treatment were surveyed at 16 Spanish centers during the stabilization phase of this treatment. Patients were grouped using cluster analysis based on three key indicators of buprenorphine dosage management: dose, adequacy according to physician, and adjustment according to patient. The clusters obtained were compared regarding different facets of patient clinical condition. Four clusters were identified and labeled as follows (buprenorphine average dose and percentage of participants in each cluster are given in brackets): "Clinically Adequate and Adjusted to Patient Desired Low Dosage" (2.60 mg/d, 37.05%); "Clinically Adequate and Adjusted to Patient Desired High Dosage" (10.71 mg/d, 29.18%); "Clinically Adequate and Patient Desired Reduction of Low Dosage" (3.38 mg/d, 20.0%); and "Clinically Inadequate and Adjusted to Patient Desired Moderate Dosage" (7.55 mg/d, 13.77%). Compared to patients from the other three clusters, participants in the latter cluster reported more frequent use of heroin and cocaine during last week, lower satisfaction with buprenorphine-naloxone as a medication, higher prevalence of buprenorphine-naloxone adverse effects and poorer psychological adjustment. Our results show notable differences between clusters of heroin-dependent patients regarding buprenorphine dosage management. We also identified a group of patients receiving clinically inadequate buprenorphine dosage, which was related to poorer clinical condition. Copyright © 2018 Elsevier B.V. All rights reserved.

42 CFR 417.414 - Qualifying condition: Range of services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS Qualifying Conditions for Medicare Contracts § 417.414 Qualifying condition...

Abnormal medial temporal activity for bound information during working memory maintenance in patients with schizophrenia.

PubMed

Luck, David; Danion, Jean-Marie; Marrer, Corrine; Pham, Bich-Tuy; Gounot, Daniel; Foucher, Jack

2010-08-01

Alterations of binding in long-term memory in schizophrenia are well established and occur as a result of aberrant activity in the medial temporal lobe (MTL). In working memory (WM), such a deficit is less clear and the pathophysiological bases remain unstudied. Seventeen patients with schizophrenia and 17 matched healthy controls performed a WM binding task while undergoing functional magnetic resonance imaging. Binding was assessed by contrasting two conditions comprising an equal amount of verbal and spatial information (i.e., three letters and three spatial locations), but differing in the absence or presence of a link between them. In healthy controls, MTL activation was observed for encoding and maintenance of bound information but not for its retrieval. Between-group comparisons revealed that patients with schizophrenia showed MTL hypoactivation during the maintenance phase only. In addition, BOLD signals correlated with behavioral performance in controls but not in patients with schizophrenia. Our results confirm the major role that the MTL plays in the pathophysiology of schizophrenia. Short-term and long-term relational memory deficits in schizophrenia may share common cognitive and functional pathological bases. Our results provide additional information about the episodic buffer that represents an integrative interface between WM and long-term memory. Copyright 2009 Wiley-Liss, Inc.

A computer-based maintenance reminder and record-keeping system for clinical laboratories.

PubMed

Roberts, B I; Mathews, C L; Walton, C J; Frazier, G

1982-09-01

"Maintenance" is all the activity an organization devotes to keeping instruments within performance specifications to assure accurate and precise operation. The increasing use of complex analytical instruments as "workhorses" in clinical laboratories requires more maintenance awareness by laboratory personnel. Record-keeping systems that document maintenance completion and that should prompt the continued performance of maintenance tasks have not kept up with instrumentation development. We report here a computer-based record-keeping and reminder system that lists weekly the maintenance items due for each work station in the laboratory, including the time required to complete each item. Written in BASIC, the system uses a DATABOSS data base management system running on a time-shared Digital Equipment Corporation PDP 11/60 computer with a RSTS V 7.0 operating system.

Actigraphy-based sleep parameters during the reinstatement of methamphetamine self-administration in rhesus monkeys.

PubMed

Berro, Laís F; Andersen, Monica L; Tufik, Sergio; Howell, Leonard L

2016-04-01

The objective of this study was to investigate nighttime activity of nonhuman primates during extinction and cue- and drug-primed reinstatement of methamphetamine self-administration. Adult rhesus monkeys (Macaca mulatta; n = 5) self-administered methamphetamine (0.01 mg/kg/injection, i.v.) under a fixed-ratio 20 schedule of reinforcement. Saline infusions were then substituted for methamphetamine and stimulus light (drug-conditioned stimulus presented during drug self-administration) withheld until subjects reached extinction criteria. Drug- and cue-induced reinstatement effects were evaluated after i.v. noncontingent priming injections of methamphetamine (0.03, 0.1, or 0.3 mg/kg). Activity-based sleep measures were evaluated with Actiwatch monitors a week before (baseline nighttime activity parameters) and throughout the protocol. Although methamphetamine self-administration did not significantly affect nighttime activity compared to baseline, sleeplike parameters were improved during extinction compared to self-administration maintenance. Priming injection of 0.1 mg/kg methamphetamine, but not 0.03 or 0.3 mg/kg, induced significant reinstatement effects. These behavioral responses were accompanied by nighttime outcomes, with increased sleep fragmentation and decreased sleep efficiency in the night following 0.1 mg/kg methamphetamine-induced reinstatement. In the absence of both drug and drug-paired cues (extinction conditions), nighttime activity decreased compared to self-administration maintenance. Additionally, effective reinstatement conditions impaired sleeplike measures. Our data indicate that the reintroduction of the stimulus light as a drug-paired cue increased nighttime activity. (c) 2016 APA, all rights reserved).

Toward Improved Maintenance Training Programs: The Potentials for Training and Aiding the Technician.

DTIC Science & Technology

1981-07-01

conditional, fault-isolation approach of the con- Data Base Requirements tent expert, photographs of normal and abnormal symp- The content-expert may...59 THE AUTOMATED INTERGRATION OF TRAINING AND AIDING INFORMATION FOR THE OPERATOR/TECHNICIAN Dr. Douglas Towne...Subsystem approach devel- until this Third Biennial Conference oped by the Air Force in the 1960’s for us to call a meeting devoted to integrate Human

A Data Warehouse to Support Condition Based Maintenance (CBM)

DTIC Science & Technology

2005-05-01

Application ( VBA ) code sequence to import the original MAST-generated CSV and then create a single output table in DBASE IV format. The DBASE IV format...database architecture (Oracle, Sybase, MS- SQL , etc). This design includes table definitions, comments, specification of table attributes, primary and foreign...built queries and applications. Needs the application developers to construct data views. No SQL programming experience. b. Power Database User - knows

Documentation and Evaluation of Comparability of Overhead Costs Reported for Depot Level Maintenance.

DTIC Science & Technology

1984-12-01

operating results (income statement) and financial condition ( balance sheet) are developed. From this data, stabilized rates are developed and adjusted to...funding budgets based on projected workloads developed at workload conferences. The workload subsystem distributes and balances projected manhours at...is the validation criteria. However, any account with a credit balance is deleted from the UCA data which causes a minor but identifiable

Integrated Instrumentation and Sensor Systems Enabling Condition-Based Maintenance of Aerospace Equipment

DTIC Science & Technology

2012-01-01

systems . For some specific sensor requirements in the domains considered here, for example, assessing system behavior and component state in gas turbine ...Cost Objectives. In general , the implication of the suitability and life cycle cost [LCC] driven objectives for integrated instrumentation/sensor system ...section should be considered. In general , the systems engineering approach provided clear benefits in defining user significant IISS system requirements and

Improving Legacy Aircraft Systems Through Condition-Based Maintenance: An H-60 Case Study

DTIC Science & Technology

2014-09-01

level functions. These decompositions are equivalent to a detailed design effort in systems engineering. NAMPSOPs have a common architectural structure...Assembly Power Available Spindle Cables No.1 Engine Load Demand Spindle Control Cables Engine Pneumatic Starters Auxiliary Power Unit IRCM FLIR Mission...Analysis Fuel System Main Rotor Head Main Module Main Gear Box Radiator Engine Output Shaft Auxiliary Power Unit Flight Control Cables Tail Landing

Mechanisms of deterioration of nutrients. [retention of flavor during freeze drying

NASA Technical Reports Server (NTRS)

Karel, M.; Flink, J. M.

1975-01-01

The retention of flavor during freeze drying was studied with model systems. Mechanisms by which flavor retention phenomena is explained were developed and process conditions specified so that flavor retention is optimized. The literature is reviewed and results of studies of the flavor retention behavior of a number of real food products, including both liquid and solid foods are evaluated. Process parameters predicted by the mechanisms to be of greatest significance are freezing rate, initial solids content, and conditions which result in maintenance of sample structure. Flavor quality for the real food showed the same behavior relative to process conditions as predicted by the mechanisms based on model system studies.

Prognostics and Health Management of Wind Turbines: Current Status and Future Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

Prognostics and health management is not a new concept. It has been used in relatively mature industries, such as aviation and electronics, to help improve operation and maintenance (O&M) practices. In the wind industry, prognostics and health management is relatively new. The level for both wind industry applications and research and development (R&D) has increased in recent years because of its potential for reducing O&M cost of wind power, especially for turbines installed offshore. The majority of wind industry application efforts has been focused on diagnosis based on various sensing and feature extraction techniques. For R&D, activities are being conductedmore » in almost all areas of a typical prognostics and health management framework (i.e., sensing, data collection, feature extraction, diagnosis, prognosis, and maintenance scheduling). This presentation provides an overview of the current status of wind turbine prognostics and health management that focuses on drivetrain condition monitoring through vibration, oil debris, and oil condition analysis techniques. It also discusses turbine component health diagnosis through data mining and modeling based on supervisory control and data acquisition system data. Finally, it provides a brief survey of R&D activities for wind turbine prognostics and health management, along with future opportunities.« less

Augmented reality application utility for aviation maintenance work instruction

NASA Astrophysics Data System (ADS)

Pourcho, John Bryan

Current aviation maintenance work instructions do not display information effectively enough to prevent costly errors and safety concerns. Aircraft are complex assemblies of highly interrelated components that confound troubleshooting and can make the maintenance procedure difficult (Drury & Gramopadhye, 2001). The sophisticated nature of aircraft maintenance necessitates a revolutionized training intervention for aviation maintenance technicians (United States General Accounting Office, 2003). Quite simply, the paper based job task cards fall short of offering rapid access to technical data and the system or component visualization necessary for working on complex integrated aircraft systems. Possible solutions to this problem include upgraded standards for paper based task cards and the use of integrated 3D product definition used on various mobile platforms (Ropp, Thomas, Lee, Broyles, Lewin, Andreychek, & Nicol, 2013). Previous studies have shown that incorporation of 3D graphics in work instructions allow the user to more efficiently and accurately interpret maintenance information (Jackson & Batstone, 2008). For aircraft maintenance workers, the use of mobile 3D model-based task cards could make current paper task card standards obsolete with their ability to deliver relevant, synchronized information to and from the hangar. Unlike previous versions of 3D model-based definition task cards and paper task cards, which are currently used in the maintenance industry, 3D model based definition task cards have the potential to be more mobile and accessible. Utilizing augmented reality applications on mobile devices to seamlessly deliver 3D product definition on mobile devices could increase the efficiency, accuracy, and reduce the mental workload for technicians when performing maintenance tasks (Macchiarella, 2004). This proposal will serve as a literary review of the aviation maintenance industry, the spatial ability of maintenance technicians, and benefits of modern digital hardware to educate, point out gaps in research, and observe possible foundations on which to build the future of aviation maintenance job task cards leading to a the methodology of the proposed study.

Indoor air quality and the law in Singapore.

PubMed

Chan, P

1999-12-01

With the greater use of air-conditioned offices in Singapore, achieving good indoor air quality has become an important issue. The laws that impose duties upon designers and contractors with respect to the design and construction of air-conditioning and mechanical ventilation (ACMV) systems are set out in the Building Control Regulations and the Singapore Standard Code of Practice for Mechanical Ventilation and Air-conditioning in Buildings (hereinafter "SS CP 13:1980"). ACMV maintenance is governed by the Environmental Public Health Act, the Building and Common Property (Maintenance and Management) Act, and the Land Titles (Strata) Act, as well as by lease or tenancy agreements. Designers, contractors, developers, building owners and management corporations may also be liable to the workers, occupants and other premises users for indoor air quality (IAQ)-related injuries under the general principles of contract and tort. Recently, the Guidelines for Good Indoor Air Quality in Office Premises was issued by the Ministry of Environment to complement SS CP 13:1980 toward improving the indoor air quality of air-conditioned office premises. Although the Guidelines have no statutory effect, they may be adopted as contractual requirements in construction, lease and maintenance contracts. They may also be used to determine the relevant standard of duty of care required to discharge tortious liability. This paper looks at the existing laws and rules affecting the design, construction and maintenance of air-conditioned offices in light of Part III of the Ministry's Guidelines.

Paranal maintenance and CMMS experience

NASA Astrophysics Data System (ADS)

Montano, Nelson

2004-10-01

During the last four years of operations, low technical downtime has been one of the relevant records of the Paranal Observatory. From the beginning of the Very Large Telescope (VLT) project, European Southern Observatory (ESO) has considered the implementation of a proper maintenance strategy a fundamental point in order to ensure low technical down time and preserve the Observatory's assets. The implementation of the maintenance strategy was based on the following aspects: - Strong maintenance sense during the design stage. Line Replacement Unit (LRU) concept, standardization and modularity of the Observatory equipment - Creation of a dedicated team for Maintenance - The implementation of a Computerized Maintenance Management System After four operational years, the result of these aspects has exceeded the expectations; the Observatory has been operating with high availability under a sustainable strategy. The strengths of the maintenance strategy have been based on modern maintenance concepts applied by regular production companies, where any minute of down time involves high cost. The operation of the actual Paranal Maintenance System is based mainly on proactive activities, such as regular inspections, preventive maintenance (PM) and predictive maintenance (PdM) plans. Nevertheless, it has been necessary to implement a strong plan for corrective maintenance (CM). The Spare Parts Strategy has also been an important point linked to the Maintenance Strategy and CMMS implementation. At present, almost 4,000 items related to the Observatory spare parts are loaded into the CMMS database. Currently, we are studying the implementation of a Reliability Centered Maintenance (RCM) project in one of our critical systems The following document presents the actual status of the Paranal Maintenance Strategy and which have been the motivations to implement the established strategy.

7 CFR 1730.26 - Certification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

7 CFR 1730.26 - Certification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

7 CFR 1730.26 - Certification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

7 CFR 1730.26 - Certification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

7 CFR 1730.26 - Certification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.26 Certification. (a) Engineer's certification. Where provided for in the borrower's loan documents, RUS may require the borrower to provide an “Engineer's Certification” as to the condition of the borrower's system...

Improving the use of crack sealing to asphalt pavement in Louisiana : research project capsule : technology transfer program.

DOT National Transportation Integrated Search

2016-10-01

Pavement performance : depends on the effectiveness : and timeliness of : maintenance efforts. : Deferred maintenance : increases the severity of : distresses and leads to a more : rapid decline of a pavements : condition. An effective : maintenan...

Rapid Transit Subways - Guidelines for Engineering New Installations for Reduced Maintenance

DOT National Transportation Integrated Search

1978-01-01

Economic design of new subways requires optimization of installation and maintenance costs of all the major constituent items. A prerequisite for this is an awareness of the rigorous environmental and other conditions imposed on the subway. Changing ...

30 CFR 250.1708 - What are my BOP inspection and maintenance requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... inspect your BOP system and marine riser at least once every 3 days if weather and sea conditions permit... alternate methods and frequencies to inspect a marine riser. (b) BOP maintenance. You must maintain your BOP...

30 CFR 250.617 - What are my BOP inspection and maintenance requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... your BOP system and marine riser at least once each day if weather and sea conditions permit. You may... and frequencies to inspect a marine riser. (b) BOP maintenance. You must maintain your BOP system to...

30 CFR 250.618 - What are my BOP inspection and maintenance requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... marine riser at least once every 3 days if weather and sea conditions permit. You may use television... frequencies to inspect a marine riser. (b) BOP maintenance. You must maintain your BOP system to ensure that...

30 CFR 250.617 - What are my BOP inspection and maintenance requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... BOP system and marine riser at least once each day if weather and sea conditions permit. You may use... frequencies to inspect a marine riser. (b) BOP maintenance. You must maintain your BOP system to ensure that...

30 CFR 250.618 - What are my BOP inspection and maintenance requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... marine riser at least once every 3 days if weather and sea conditions permit. You may use television... frequencies to inspect a marine riser. (b) BOP maintenance. You must maintain your BOP system to ensure that...

30 CFR 250.1708 - What are my BOP inspection and maintenance requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... inspect your BOP system and marine riser at least once every 3 days if weather and sea conditions permit... alternate methods and frequencies to inspect a marine riser. (b) BOP maintenance. You must maintain your BOP...

Checklist for School Maintenance Surveys.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This document is a simple 34-category checklist to be used by technicians conducting maintenance surveys. Categories includes: roadways & parking lots; site appearance; site utilities; exterior appearance; playground equipment; exterior structural conditions; gutters and downspouts; windows and caulking; sidewalks; entryways and exit doors;…

A Light Harvesting Complex-Like Protein in Maintenance of Photosynthetic Components in Chlamydomonas1[OPEN

PubMed Central

Zhao, Lei; Cheng, Dongmei; Huang, Xiahe; Chen, Mei; Xing, Jiale; Gao, Liyan; Li, Lingyu; Wang, Yale; Peng, Lianwei; Wang, Yingchun

2017-01-01

Using a genetic approach, we have identified and characterized a novel protein, named Msf1 (Maintenance factor for photosystem I), that is required for the maintenance of specific components of the photosynthetic apparatus in the green alga Chlamydomonas reinhardtii. Msf1 belongs to the superfamily of light-harvesting complex proteins with three transmembrane domains and consensus chlorophyll-binding sites. Loss of Msf1 leads to reduced accumulation of photosystem I and chlorophyll-binding proteins/complexes. Msf1is a component of a thylakoid complex containing key enzymes of the tetrapyrrole biosynthetic pathway, thus revealing a possible link between Msf1 and chlorophyll biosynthesis. Protein interaction assays and greening experiments demonstrate that Msf1 interacts with Copper target homolog1 (CHL27B) and accumulates concomitantly with chlorophyll in Chlamydomonas, implying that chlorophyll stabilizes Msf1. Contrary to other light-harvesting complex-like genes, the expression of Msf1 is not stimulated by high-light stress, but its protein level increases significantly under heat shock, iron and copper limitation, as well as in stationary cells. Based on these results, we propose that Msf1 is required for the maintenance of photosystem I and specific protein-chlorophyll complexes especially under certain stress conditions. PMID:28637830

Vibrations Detection in Industrial Pumps Based on Spectral Analysis to Increase Their Efficiency

NASA Astrophysics Data System (ADS)

Rachid, Belhadef; Hafaifa, Ahmed; Boumehraz, Mohamed

2016-03-01

Spectral analysis is the key tool for the study of vibration signals in rotating machinery. In this work, the vibration analysis applied for conditional preventive maintenance of such machines is proposed, as part of resolved problems related to vibration detection on the organs of these machines. The vibration signal of a centrifugal pump was treated to mount the benefits of the approach proposed. The obtained results present the signal estimation of a pump vibration using Fourier transform technique compared by the spectral analysis methods based on Prony approach.

Dietary nucleotides prevent decrease in cellular immunity in ground-based microgravity analog

NASA Technical Reports Server (NTRS)

Yamauchi, Keiko; Hales, Nathan W.; Robinson, Sandra M.; Niehoff, Michael L.; Ramesh, Vani; Pellis, Neal R.; Kulkarni, Anil D.

2002-01-01

Microgravity and stress of spaceflights result in immune dysfunction. The role of nutrition, especially nucleotide supplementation, has become an area of intensive research and significant interest in immunomodulation for maintenance of cellular immune responses. The studies presented here evaluate the plausibility of administering nucleotides to obviate immune dysfunction in an Earth-based in vivo analog of microgravity as studied in anti-orthostatic tail suspension (AOS) of mice. Mice were divided into three housing groups: group, isolation, and AOS. Mice were fed either control chow diet (CD), or RNA-, adenine-, or uracil-supplemented CD for the 1-wk duration of the experiments. In AOS mice, supplemental nucleotides significantly increased in vivo lymph node proliferation and ex vivo lymphoproliferation response to alloantigen and mitogens, respectively, and interleukin-2 and interferon-gamma production. A lower corticosterone level was observed in uracil-supplemented CD compared with CD. These results suggest that exogenous nucleotide supplementation, especially uracil, of normal diet is beneficial in the maintenance and restoration of the immune response during the microgravity analog conditions.

A Silicon Carbide Wireless Temperature Sensing System for High Temperature Applications

PubMed Central

Yang, Jie

2013-01-01

In this article, an extreme environment-capable temperature sensing system based on state-of-art silicon carbide (SiC) wireless electronics is presented. In conjunction with a Pt-Pb thermocouple, the SiC wireless sensor suite is operable at 450 °C while under centrifugal load greater than 1,000 g. This SiC wireless temperature sensing system is designed to be non-intrusively embedded inside the gas turbine generators, acquiring the temperature information of critical components such as turbine blades, and wirelessly transmitting the information to the receiver located outside the turbine engine. A prototype system was developed and verified up to 450 °C through high temperature lab testing. The combination of the extreme temperature SiC wireless telemetry technology and integrated harsh environment sensors will allow for condition-based in-situ maintenance of power generators and aircraft turbines in field operation, and can be applied in many other industries requiring extreme environment monitoring and maintenance. PMID:23377189

A Multi-Level Decision Fusion Strategy for Condition Based Maintenance of Composite Structures

PubMed Central

Sharif Khodaei, Zahra; Aliabadi, M.H.

2016-01-01

In this work, a multi-level decision fusion strategy is proposed which weighs the Value of Information (VoI) against the intended functions of a Structural Health Monitoring (SHM) system. This paper presents a multi-level approach for three different maintenance strategies in which the performance of the SHM systems is evaluated against its intended functions. Level 1 diagnosis results in damage existence with minimum sensors covering a large area by finding the maximum energy difference for the guided waves propagating in pristine structure and the post-impact state; Level 2 diagnosis provides damage detection and approximate localization using an approach based on Electro-Mechanical Impedance (EMI) measures, while Level 3 characterizes damage (exact location and size) in addition to its detection by utilising a Weighted Energy Arrival Method (WEAM). The proposed multi-level strategy is verified and validated experimentally by detection of Barely Visible Impact Damage (BVID) on a curved composite fuselage panel. PMID:28773910

Effect of a fall prevention program on balance maintenance using a quasi-experimental design in real-world settings.

PubMed

Robitaille, Yvonne; Fournier, Michel; Laforest, Sophie; Gauvin, Lise; Filiatrault, Johanne; Corriveau, Hélène

2012-08-01

To examine the effect of a fall prevention program offered under real-world conditions on balance maintenance several months after the program. To explore the program's impact on falls. A quasi-experimental study was conducted among community-dwelling seniors, with pre- and postintervention measures of balance performance and self-reported falls. Ten community-based organizations offered the intervention (98 participants) and 7 recruited participants to the study's control arm (102 participants). An earlier study examined balance immediately after the 12-week program. The present study focuses on the 12-month effect. Linear regression (balance) and negative binomial regression (falls) procedures were performed.falls. During the 12-month study period, experimental participants improved and maintained their balance as reflected by their scores on three performance tests. There was no evidence of an effect on falls.falls. Structured group exercise programs offered in community-based settings can maintain selected components of balance for several months after the program's end.

Structural health and prognostics management for the enhancement of offshore wind turbine operations and maintenance strategies

DOE PAGES

Griffith, D. Todd; Yoder, Nathanael C.; Resor, Brian; ...

2013-09-19

Offshore wind turbines are an attractive source for clean and renewable energy for reasons including their proximity to population centers and higher capacity factors. One obstacle to the more widespread installation of offshore wind turbines in the USA, however, is that recent projections of offshore operations and maintenance costs vary from two to five times the land-based costs. One way in which these costs could be reduced is through use of a structural health and prognostics management (SHPM) system as part of a condition-based maintenance paradigm with smart loads management. Our paper contributes to the development of such strategies bymore » developing an initial roadmap for SHPM, with application to the blades. One of the key elements of the approach is a multiscale simulation approach developed to identify how the underlying physics of the system are affected by the presence of damage and how these changes manifest themselves in the operational response of a full turbine. A case study of a trailing edge disbond is analysed to demonstrate the multiscale sensitivity of damage approach and to show the potential life extension and increased energy capture that can be achieved using simple changes in the overall turbine control and loads management strategy. Finally, the integration of health monitoring information, economic considerations such as repair costs versus state of health, and a smart loads management methodology provides an initial roadmap for reducing operations and maintenance costs for offshore wind farms while increasing turbine availability and overall profit.« less

Self-other disturbance in borderline personality disorder: Neural, self-report, and performance-based evidence.

PubMed

Beeney, Joseph E; Hallquist, Michael N; Ellison, William D; Levy, Kenneth N

2016-01-01

Individuals with borderline personality disorder (BPD) display an impoverished sense of self and representations of self and others that shift between positive and negative poles. However, little research has investigated the nature of representational disturbance in BPD. The present study takes a multimodal approach. A card sort task was used to investigate complexity, integration, and valence of self-representation in BPD. Impairment in maintenance of self and other representations was assessed using a personality representational maintenance task. Finally, functional MRI (fMRI) was used to assess whether individuals with BPD show neural abnormalities related specifically to the self and what brain areas may be related to poor representational maintenance. Individuals with BPD sorted self-aspects suggesting more complexity of self-representation, but also less integration and more negative valence overall. On the representational maintenance task, individuals with BPD showed less consistency in their representations of self and others over the 3-hr period, but only for abstract, personality-based representations. Performance on this measure mediated between-groups brain activation in several areas supporting social cognition. We found no evidence for social-cognitive disturbance specific to the self. Additionally, the BPD group showed main effects, insensitive to condition, of hyperactivation in the medial prefrontal cortex, temporal parietal junction, several regions of the frontal pole, the precuneus and middle temporal gyrus, all areas crucial social cognition. In contrast, controls evidenced greater activation in visual, sensory, motor, and mirror neuron regions. These findings are discussed in relation to research regarding hypermentalization and the overlap between self- and other-disturbance. (c) 2016 APA, all rights reserved).

Optimal Medical Equipment Maintenance Service Proposal Decision Support System combining Activity Based Costing (ABC) and the Analytic Hierarchy Process (AHP).

PubMed

da Rocha, Leticia; Sloane, Elliot; M Bassani, Jose

2005-01-01

This study describes a framework to support the choice of the maintenance service (in-house or third party contract) for each category of medical equipment based on: a) the real medical equipment maintenance management system currently used by the biomedical engineering group of the public health system of the Universidade Estadual de Campinas located in Brazil to control the medical equipment maintenance service, b) the Activity Based Costing (ABC) method, and c) the Analytic Hierarchy Process (AHP) method. Results show the cost and performance related to each type of maintenance service. Decision-makers can use these results to evaluate possible strategies for the categories of equipment.

Buffing, burnishing, and stripping of vinyl asbestos floor tile

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollett, B.A.; Edwards, A.; Clark, P.J.

Studies were conducted to evaluate airborne asbestos concentrations during the three principal types of preventative maintenance (low-speed spray-buffing, ultra high-speed burnishing, and wet-stripping) used on asbestos-containing floor tiles. These were done under pre-existing and prepared levels of floor care maintenance. Airborne asbestos concentrations were measured before and during each floor care procedure to determine the magnitude of the increase in airborne asbestos levels during each procedure. Airborne total fiber concentrations were also measured for comparison with the Occupational Safety and Health Administration`s (OSHA) Permissible Exposure Limit (PEL) of 0.1 f/cm{sup 3}. Low-speed spray-buffing and wet-stripping were evaluated on pre-existing floormore » conditions and three levels of prepared floor care conditions (poor, medium, and good). Ultra high-speed burnishing and wet-stripping were evaluated on two levels of prepared floor care conditions (poor and good). Floor care conditions were defined in consultation with the Chemical Specialty Manufacturers Association and other representatives of floor-care chemical manufacturers. Controlled studies were conducted in an unoccupied building at the decommissioned Chanute Air Force Base in Rantoul, Illinois, with the cooperation of the U.S. Air Force. The building offered approximately 8600 ft{sup 2} of open floor space tiled with 9-inch by 9-inch resilient floor tile containing approximately 5% chrysotile asbestos.« less

Attention Bias Modification for Major Depressive Disorder: Effects on Attention Bias, Resting State Connectivity, and Symptom Change

PubMed Central

Beevers, Christopher G.; Clasen, Peter C.; Enock, Philip M.; Schnyer, David M.

2015-01-01

Cognitive theories of depression posit that selective attention for negative information contributes to the maintenance of depression. The current study experimentally tested this idea by randomly assigning adults with Major Depressive Disorder (MDD) to four weeks of computer-based attention bias modification designed to reduce negative attention bias or four weeks of placebo attention training. Findings indicate that compared to placebo training, attention bias modification reduced negative attention bias and increased resting-state connectivity within a neural circuit (i.e., middle frontal gyrus and dorsal anterior cingulate cortex) that supports control over emotional information. Further, pre- to post-training change in negative attention bias was significantly correlated with depression symptom change only in the active training condition. Exploratory analyses indicated that pre- to post-training changes in resting state connectivity within a circuit associated with sustained attention to visual information (i.e., precuenus and middle frontal gyrus) contributed to symptom improvement in the placebo condition. Importantly, depression symptoms did not change differentially between the training groups—overall, a 40% decrease in symptoms was observed across attention training conditions. Findings suggest that negative attention bias is associated with the maintenance of depression; however, general attentional control may also maintain depression symptoms, as evidenced by resting state connectivity and depression symptom improvement in the placebo training condition. PMID:25894440

32 CFR 260.6 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... period of time subject to suspension or termination upon failure to comply with agreed-upon terms. It... sanitation and the maintenance of vending facilities and vending machines in an orderly condition at all times, and the installation, maintenance, repair, replacement, servicing, and removal of vending...

32 CFR 260.6 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... period of time subject to suspension or termination upon failure to comply with agreed-upon terms. It... sanitation and the maintenance of vending facilities and vending machines in an orderly condition at all times, and the installation, maintenance, repair, replacement, servicing, and removal of vending...

The Benefits of Health Maintenance.

ERIC Educational Resources Information Center

Rosenstein, Alan H.

1987-01-01

The article focuses on the merits of a comprehensive, medically-oriented health maintenance/risk assessment program, and suggests that such conditions as heart disease, cancer, and arteriosclerosis can be prevented or postponed through proper nutrition, weight control, exercise, smoking cessation, and stress management. (Author/CB)

Maintenance of Occupational Control: The Case of Professions.

ERIC Educational Resources Information Center

Child, John; Fulk, Janet

1982-01-01

Contemporary conditions relevant to the maintenance of occupational control are examined for five professions (accounting, architecture, civil engineering, law, and medicine) in the United Kingdom and the United States as an impetus for the analysis of control by occupations in general. (Author/CT)

Ganciclovir. A pharmacoeconomic review of its use as intravenous or oral maintenance therapy in the management of cytomegalovirus retinitis in patients with AIDS.

PubMed

Perry, C M; Davis, R

1997-08-01

Cytomegalovirus retinitis, an opportunistic infection caused by the herpesvirus cytomegalovirus, is a major cause of illness in patients with advanced AIDS. As infected patients require long term drug treatment to delay disease progression and minimise loss of vision, the disease is associated with substantial treatment costs which considerably increase overall expenditure on AIDS-related health care. During the last decade, intravenous ganciclovir has been a mainstay of treatment for patients with cytomegalovirus retinitis. However, notwithstanding its demonstrated efficacy as maintenance therapy for this condition, long term intravenous drug administration is both inconvenient and uncomfortable for many patients. Moreover, neutropenia and catheter-related infections have been reported commonly in patients receiving ganciclovir via the intravenous route. To overcome the limitations of intravenous ganciclovir, an oral formulation of the drug has been developed for use as maintenance therapy. In comparative clinical trials, both intravenous and oral ganciclovir maintenance therapy slowed disease progression and preserved visual acuity in patients with stabilised cytomegalo-virus retinitis, although there was evidence that the intravenous formulation was more effective in terms of delaying recurrence of active disease. This suggests that oral ganciclovir use should be limited to the treatment of patients without evidence of immediately sight-threatening cytomegalovirus retinitis. Three published cost analyses, which were based on efficacy and tolerability data derived from 2 randomised, comparative clinical trials, have shown that oral ganciclovir maintenance therapy offers cost advantages over intravenous maintenance therapy, despite the higher acquisition cost of the oral formulation. The higher overall costs of intravenous maintenance treatment, compared with oral therapy, were attributed to higher drug administration and adverse event treatment costs. In one analysis, estimated lifetime treatment costs of oral maintenance therapy were 25.2% lower than those of intravenous maintenance treatment. As yet, no formal cost-effectiveness evaluations of oral and intravenous ganciclovir have been published. Few published data are available regarding the relative effects of intravenous and oral ganciclovir on quality of life. However, in a health state utility analysis, there was a large overall preference among HIV-infected individuals for oral over intravenous maintenance treatment. In conclusion, oral ganciclovir appears to be a cost-saving and patient-preferred alternative to its intravenous counterpart for the maintenance therapy of AIDS patients with stabilised cytomegalovirus retinitis in whom there is no evidence of sight-threatening disease.

Challenges and Opportunities in Nde, Ishm and Material State Awareness for Aircraft Structures: us Air Force Perspective

NASA Astrophysics Data System (ADS)

Buynak, C. F.; Blackshire, J.; Lindgren, E. A.; Jata, K. V.

2008-02-01

As one of the primary data and information sources in the maintenance of USAF Aging Military Fleet, NDE plays a major role in the definition and operation of maintenance processes on these aircraft. To focus new NDE developmental efforts, the AFRL NDE R&D group has the charter to research, develop and transition new capabilities to the field and depot users. This multi-faceted task is achieved through a balanced NDE and on-board sensor development program with the ultimate goal to transition technology to the Air Force user Commands. Technology requirements for NDE and Material State Awareness emerge from Air Force Initiatives to realize Condition Based Maintenance and to develop the "Depot of the Future". This evening session will present an overview of Air Force Initiatives, emerging R&D issues for Structural Health Monitoring and NDE methodologies as well as basic research initiatives within the Air Force Research Laboratory. It is intended that the session provide an open forum to pursue paths for new technology development and application.

Competency-Based Horticulture: Turfgrass Maintenance Worker.

ERIC Educational Resources Information Center

College of DuPage, Glen Ellyn, IL.

This competency-based horticulture curriculum guide is designed to provide secondary and postsecondary horticulture teachers with a task-oriented program for training turfgrass maintenance workers. It contains a master resource list, a listing of turfgrass maintenance resources available from various states, and 59 competency task sheets organized…

Maintenance Budgeting.

ERIC Educational Resources Information Center

Smith, J. McCree

Three methods for the preparation of maintenance budgets are discussed--(1) a traditional method, inconclusive and obsolete, based on gross square footage, (2) the formula approach method based on building classification (wood-frame, masonry-wood, masonry-concrete) with maintenance cost factors for each type plus custodial service rates by type of…

Modelling Wind Turbine Failures based on Weather Conditions

NASA Astrophysics Data System (ADS)

Reder, Maik; Melero, Julio J.

2017-11-01

A large proportion of the overall costs of a wind farm is directly related to operation and maintenance (O&M) tasks. By applying predictive O&M strategies rather than corrective approaches these costs can be decreased significantly. Here, especially wind turbine (WT) failure models can help to understand the components’ degradation processes and enable the operators to anticipate upcoming failures. Usually, these models are based on the age of the systems or components. However, latest research shows that the on-site weather conditions also affect the turbine failure behaviour significantly. This study presents a novel approach to model WT failures based on the environmental conditions to which they are exposed to. The results focus on general WT failures, as well as on four main components: gearbox, generator, pitch and yaw system. A penalised likelihood estimation is used in order to avoid problems due to for example highly correlated input covariates. The relative importance of the model covariates is assessed in order to analyse the effect of each weather parameter on the model output.

Nondestructive tests for railway monitoring. European Experience in COST Action TU1208

NASA Astrophysics Data System (ADS)

Fontul, Simona; Solla, Mercedes; Loizos, Andreas

2016-04-01

The railway monitoring is an important issue for a proper maintenance planning. With the increase in loads and travel speed, it is important to be able to diagnose the track defects and to plan the proper maintenance without interfering with the users. Traditionally, the maintenance actions are planned based on the geometric level parameters assessed without contact with the line, at traffic speed, by dedicated inspection vehicles. Nevertheless, the geometric condition of the line does not provide information on the defects causes. In order to complements the information on the causes, geophysics measurements can be performed in a nondestructive way. Among these later methods, Ground Penetrating Radar (GPR) is a quick and effective technique to evaluate infrastructure condition in a continuous manner, replacing or reducing the use of traditional drilling method. GPR application to railways infrastructures, during construction and monitoring phase, is relatively recent. It is based on the measuring of layers thicknesses and detection of structural changes. It also enables the assessment of materials properties that constitute the infrastructure and the evaluation of the different types of defects such as ballast pockets, fouled ballast, poor drainage, subgrade settlement and transitions problems. These deteriorations are generally the causes of vertical deviations in track geometry. Moreover, the development of new GPR systems with higher antenna frequencies, better data acquisition systems, more user friendly software and new algorithms for calculation of materials properties can lead to a regular use of GPR. A resume of the European experience in COST Action TU1208 of the application of GPR for railway monitoring and the measurement interpretation is presented in this paper. Also complementary nondestructive tests and other geophysical methods are referred, together with case studies of their application. The main troubleshooting and the needs for data analysis tools that can improve the processing of the measurements are highlighted. Future approaches of combined application of geophysical methods, load tests and track geometry measurements are addressed. A possible methodology of joint interpretation and examples of maintenance measurements adequate to the deterioration causes are presented.

Contribution to the Optimization of Strategy of Maintenance by Lean Six Sigma

NASA Astrophysics Data System (ADS)

Youssouf, Ayadi; Rachid, Chaib; Ion, Verzea

The efficiency of the maintenance of the industrial systems is a major economic stake for their business concern. The main difficulties and the sources of ineffectiveness live in the choice of the actions of maintenance especially when the machine plays a vital role in the process of production. But as Algeria has embarked on major infrastructure projects in transport, housing, automobile, manufacturing industry and construction (factories, housing, highway, subway, tram, etc.) requiring new implications on maintenance strategies that meet industry requirements imposed by the exploitation. From then on and seen the importance of the maintenance on the economic market and sound impacts on the performances of the installations, methods of optimization were developed. For this purpose, to ensure the survival of businesses, be credible, contributing and competitive in the market, maintenance services must continually adapt to the progress of technical areas, technological and organizational even help maintenance managers to construct or to modify maintenance strategies, objective of this work. Our contribution in this work focuses on the optimization of maintenance for industrial systems by the use of Lean six Sigma bases. Lean Six Sigma is a method of improving the quality and profitability based on mastering statically of process and it is also a management style that based on a highly regulated organization dedicated to managing project. The method is based on five main steps summarized in the acronym (DMAIC): Define Measure, Analyze, Improve and Control. Application of the method on the maintenance processes with using maintenance methods during the five phases of the method will help to reduce costs and losses in order to strive for optimum results in terms of profit and quality.

The impact of self-efficacy on physical activity maintenance in patients with hip osteoarthritis - a mixed methods study.

PubMed

Hammer, Nanna Maria; Bieler, Theresa; Beyer, Nina; Midtgaard, Julie

2016-08-01

Understanding motivational factors related to physical activity (PA) maintenance is essential in promoting long-term exercise benefits. This study explored the impact of self-efficacy (SE) on post-intervention PA maintenance in patients with hip osteoarthritis. An SE-theory based mixed-methods sub-study of a trial investigating the effects of 4 months supervised exercise in patients with hip osteoarthritis. Questionnaire data (n = 52; baseline and 12 months) on PA and SE (Arthritis Self-Efficacy Scale, ASES, score-range 10-100) were analysed (Mann-Whitney test) for differences in characteristics of maintainers and non-maintainers. Semi-structured individual interviews (n = 15; at 12-months follow-up) were analysed using directed content analysis. Compared to non-maintainers (n = 9; 17%) maintainers (n = 31; 60%) had improved (p < 0.01) in median scores of ASES (Pain: +12 versus -32 points; Function: +7 versus -9 points; Other Symptoms: +11 versus -26 points) from baseline to 12 months. Experiences of possessing required skills, inspiration by other participants, encouragement from physical therapists and altered interpretations of PA-induced physiological conditions contributed to increased SE and PA maintenance. Moreover, experienced symptoms, exercise outcome expectations and obligation towards the study influenced maintenance. SE contributes to understanding of post-intervention PA maintenance in patients with hip osteoarthritis. However, disease-related factors and clinical trial participation appears significant too. Implications for Rehabilitation Patients' perceived self-efficacy for physical activity contributes to the understanding of post-intervention physical activity maintenance in patients with hip osteoarthritis. Practitioners may benefit from incorporating the self-efficacy theory in the planning and execution of exercise interventions to promote post-intervention physical activity maintenance and long term health benefits. Post-intervention physical activity maintenance may be increased by focussing on the patients' exercise self-efficacy through verbal persuasion and support, disease-specific information and information on normal physiological responses to exercise combined with an individualised training progression to support experiences of success and achievement of desired outcomes.

Health Monitoring for Condition-Based Maintenance of a HMMWV using an Instrumented Diagnostic Cleat

DTIC Science & Technology

2008-10-15

identify faults in the bearings, shaft , etc. In wheeled ground vehicles, loading varies significantly as mentioned above. If loads acting on the...vehicle could be fully measured or controlled in terms of the terrain input motions and/or spindle forces/moments, fault identification in wheeled...diagnostic results. - Vehicle speed traversing the cleat can be controlled. - Configuration of cleats can be designed to develop specific tests for

21 CFR 529.2150 - Sevoflurane.

Code of Federal Regulations, 2011 CFR

2011-04-01

... chapter. (c) Conditions of use—(1) Amount. For induction of surgical anesthesia: up to 7 percent sevoflurane. For maintenance of surgical anesthesia: 3.7 to 4 percent sevoflurane with oxygen in the absence.... For induction and maintenance of general anesthesia in dogs. (3) Limitations. Federal law restricts...

21 CFR 529.2150 - Sevoflurane.

Code of Federal Regulations, 2010 CFR

2010-04-01

... chapter. (c) Conditions of use—(1) Amount. For induction of surgical anesthesia: up to 7 percent sevoflurane. For maintenance of surgical anesthesia: 3.7 to 4 percent sevoflurane with oxygen in the absence.... For induction and maintenance of general anesthesia in dogs. (3) Limitations. Federal law restricts...

Phenomenology study of HERMES ground-penetrating radar technology for detection and identification of common bridge deck features

DOT National Transportation Integrated Search

2001-06-01

Accurately evaluating the condition of a bridge deck over time and using this information to choose appropriate maintenance techniques has become critical for the efficient allocation of resources to bridge deck maintenance. Tomographic imaging of su...

40 CFR 92.115 - Calibrations; frequency and overview.

Code of Federal Regulations, 2014 CFR

2014-07-01

... any maintenance which could alter calibration, calibrate the engine dynamometer flywheel torque and speed measurement transducers, as specified in § 92.116. (d) At least monthly or after any maintenance... (if used) shaft torque feedback signal at steady-state conditions by comparing: (1) Shaft torque...

40 CFR 92.115 - Calibrations; frequency and overview.

Code of Federal Regulations, 2012 CFR

2012-07-01

... any maintenance which could alter calibration, calibrate the engine dynamometer flywheel torque and speed measurement transducers, as specified in § 92.116. (d) At least monthly or after any maintenance... (if used) shaft torque feedback signal at steady-state conditions by comparing: (1) Shaft torque...

40 CFR 92.115 - Calibrations; frequency and overview.

Code of Federal Regulations, 2011 CFR

2011-07-01

... any maintenance which could alter calibration, calibrate the engine dynamometer flywheel torque and speed measurement transducers, as specified in § 92.116. (d) At least monthly or after any maintenance... (if used) shaft torque feedback signal at steady-state conditions by comparing: (1) Shaft torque...

40 CFR 92.115 - Calibrations; frequency and overview.

Code of Federal Regulations, 2013 CFR

2013-07-01

... any maintenance which could alter calibration, calibrate the engine dynamometer flywheel torque and speed measurement transducers, as specified in § 92.116. (d) At least monthly or after any maintenance... (if used) shaft torque feedback signal at steady-state conditions by comparing: (1) Shaft torque...

21 CFR 529.2150 - Sevoflurane.

Code of Federal Regulations, 2012 CFR

2012-04-01

... chapter. (c) Conditions of use—(1) Amount. For induction of surgical anesthesia: up to 7 percent sevoflurane. For maintenance of surgical anesthesia: 3.7 to 4 percent sevoflurane with oxygen in the absence.... For induction and maintenance of general anesthesia in dogs. (3) Limitations. Federal law restricts...

21 CFR 529.2150 - Sevoflurane.

Code of Federal Regulations, 2014 CFR

2014-04-01

... chapter. (c) Conditions of use—(1) Amount. For induction of surgical anesthesia: up to 7 percent sevoflurane. For maintenance of surgical anesthesia: 3.7 to 4 percent sevoflurane with oxygen in the absence.... For induction and maintenance of general anesthesia in dogs. (3) Limitations. Federal law restricts...

21 CFR 529.2150 - Sevoflurane.

Code of Federal Regulations, 2013 CFR

2013-04-01

... chapter. (c) Conditions of use—(1) Amount. For induction of surgical anesthesia: up to 7 percent sevoflurane. For maintenance of surgical anesthesia: 3.7 to 4 percent sevoflurane with oxygen in the absence.... For induction and maintenance of general anesthesia in dogs. (3) Limitations. Federal law restricts...

Progressing From Initially Ambiguous Functional Analyses: Three Case Examples

PubMed Central

Tiger, Jeffrey H.; Fisher, Wayne W.; Toussaint, Karen A.; Kodak, Tiffany

2009-01-01

Most often functional analyses are initiated using a standard set of test conditions, similar to those described by Iwata, Dorsey, Slifer, Bauman, and Richman (1982/1994). These test conditions involve the careful manipulation of motivating operations, discriminative stimuli, and reinforcement contingencies to determine the events related to the occurrence and maintenance of problem behavior. Some individuals display problem behavior that is occasioned and reinforced by idiosyncratic or otherwise unique combinations of environmental antecedents and consequences of behavior, which are unlikely to be detected using these standard assessment conditions. For these individuals, modifications to the standard test conditions or the inclusion of novel test conditions may result in clearer assessment outcomes. The current study provides three case examples of individuals whose functional analyses were initially undifferentiated; however, modifications to the standard conditions resulted in the identification of behavioral functions and the implementation of effective function-based treatments. PMID:19233611

Interactive computer-based interventions for weight loss or weight maintenance in overweight or obese people

PubMed Central

Wieland, L. Susan; Falzon, Louise; Sciamanna, Chris N; Trudeau, Kimberlee J; Folse, Suzanne Brodney; Schwartz, Joseph E; Davidson, Karina W

2014-01-01

Background The World Health Organization (WHO) estimates that the number of obese or overweight individuals worldwide will increase to 1.5 billion by 2015. Chronic diseases associated with overweight or obesity include diabetes, heart disease, hypertension and stroke. Objectives To assess the effects of interactive computer-based interventions for weight loss or weight maintenance in overweight or obese people. Search methods We searched several electronic databases, including CENTRAL, MEDLINE, EMBASE, CINAHL, LILACS and PsycINFO, through 25 May 2011. We also searched clinical trials registries to identify studies. We scanned reference lists of included studies and relevant systematic reviews. Selection criteria Studies were included if they were randomized controlled trials or quasi-randomized controlled trials that evaluated interactive computer-based weight loss or weight maintenance programs in adults with overweight or obesity. We excluded trials if the duration of the intervention was less than four weeks or the loss to follow-up was greater than 20% overall. Data collection and analysis Two authors independently extracted study data and assessed risk of bias. Where interventions, control conditions, outcomes and time frames were similar between studies, we combined study data using meta-analysis. Main results We included 14 weight loss studies with a total of 2537 participants, and four weight maintenance studies with a total of 1603 participants. Treatment duration was between four weeks and 30 months. At six months, computer-based interventions led to greater weight loss than minimal interventions (mean difference (MD) −1.5 kg; 95% confidence interval (CI) −2.1 to −0.9; two trials) but less weight loss than in-person treatment (MD 2.1 kg; 95% CI 0.8 to 3.4; one trial). At six months, computer-based interventions were superior to a minimal control intervention in limiting weight regain (MD −0.7 kg; 95% CI −1.2 to −0.2; two trials), but not superior to infrequent in-person treatment (MD 0.5 kg; 95% −0.5 to 1.6; two trials). We did not observe consistent differences in dietary or physical activity behaviors between intervention and control groups in either weight loss or weight maintenance trials. Three weight loss studies estimated the costs of computer-based interventions compared to usual care, however two of the studies were 11 and 28 years old, and recent advances in technology render these estimates unlikely to be applicable to current or future interventions, while the third study was conducted in active duty military personnel, and it is unclear whether the costs are relevant to other settings. One weight loss study reported the cost-effectiveness ratio for a weekly in-person weight loss intervention relative to a computer-based intervention as USD 7177 (EUR 5678) per life year gained (80% CI USD 3055 to USD 60,291 (EUR 2417 to EUR 47,702)). It is unclear whether this could be extrapolated to other studies. No data were identified on adverse events, morbidity, complications or health-related quality of life. Authors’ conclusions Compared to no intervention or minimal interventions (pamphlets, usual care), interactive computer-based interventions are an effective intervention for weight loss and weight maintenance. Compared to in-person interventions, interactive computer-based interventions result in smaller weight losses and lower levels of weight maintenance. The amount of additional weight loss, however, is relatively small and of brief duration, making the clinical significance of these differences unclear. PMID:22895964

Understanding and Predicting the Process of Software Maintenance Releases

NASA Technical Reports Server (NTRS)

Basili, Victor; Briand, Lionel; Condon, Steven; Kim, Yong-Mi; Melo, Walcelio L.; Valett, Jon D.

1996-01-01

One of the major concerns of any maintenance organization is to understand and estimate the cost of maintenance releases of software systems. Planning the next release so as to maximize the increase in functionality and the improvement in quality are vital to successful maintenance management. The objective of this paper is to present the results of a case study in which an incremental approach was used to better understand the effort distribution of releases and build a predictive effort model for software maintenance releases. This study was conducted in the Flight Dynamics Division (FDD) of NASA Goddard Space Flight Center(GSFC). This paper presents three main results: 1) a predictive effort model developed for the FDD's software maintenance release process; 2) measurement-based lessons learned about the maintenance process in the FDD; and 3) a set of lessons learned about the establishment of a measurement-based software maintenance improvement program. In addition, this study provides insights and guidelines for obtaining similar results in other maintenance organizations.

Acquisition of an instrumental activity of daily living in patients with Korsakoff's syndrome: a comparison of trial and error and errorless learning.

PubMed

Oudman, Erik; Nijboer, Tanja C W; Postma, Albert; Wijnia, Jan W; Kerklaan, Sandra; Lindsen, Karen; Van der Stigchel, Stefan

2013-01-01

Patients with Korsakoff's syndrome show devastating amnesia and executive deficits. Consequently, the ability to perform instrumental activities such as making coffee is frequently diminished. It is currently unknown whether patients with Korsakoff's syndrome are able to (re)learn instrumental activities. A good candidate for an effective teaching technique in Korsakoff's syndrome is errorless learning as it is based on intact implicit memory functioning. Therefore, the aim of the current study was two-fold: to investigate whether patients with Korsakoff's syndrome are able to (re)learn instrumental activities, and to compare the effectiveness of errorless learning with trial and error learning in the acquisition and maintenance of an instrumental activity, namely using a washing machine to do the laundry. Whereas initial learning performance in the errorless learning condition was superior, both intervention techniques resulted in similar improvement over eight learning sessions. Moreover, performance in a different spatial layout showed a comparable improvement. Notably, in follow-up sessions starting after four weeks without practice, performance was still elevated in the errorless learning condition, but not in the trial and error condition. The current study demonstrates that (re)learning and maintenance of an instrumental activity is possible in patients with Korsakoff's syndrome.

Melanin-specific life-history strategies.

PubMed

Emaresi, Guillaume; Bize, Pierre; Altwegg, Res; Henry, Isabelle; van den Brink, Valentijn; Gasparini, Julien; Roulin, Alexandre

2014-02-01

The maintenance of genetic variation is a long-standing issue because the adaptive value of life-history strategies associated with each genetic variant is usually unknown. However, evidence for the coexistence of alternative evolutionary fixed strategies at the population level remains scarce. Because in the tawny owl (Strix aluco) heritable melanin-based coloration shows different physiological and behavioral norms of reaction, we investigated whether coloration is associated with investment in maintenance and reproduction. Light melanic owls had lower adult survival compared to dark melanic conspecifics, and color variation was related to the trade-off between offspring number and quality. When we experimentally enlarged brood size, light melanic males produced more fledglings but in poorer condition, and they were less often recruited in the local breeding population than those of darker melanic conspecifics. Our results also suggest that dark melanic males allocate a constant effort to raise their brood independently of environmental conditions, whereas lighter melanic males finely adjust reproductive effort in relation to changes in environmental conditions. Color traits can therefore be associated with life-history strategies, and stochastic environmental perturbation can temporarily favor one phenotype over others. The existence of fixed strategies implies that some phenotypes can sometimes display a "maladapted" strategy. Long-term population monitoring is therefore vital for a full understanding of how different genotypes deal with trade-offs.

Looking at food in sad mood: do attention biases lead emotional eaters into overeating after a negative mood induction?

PubMed

Werthmann, Jessica; Renner, Fritz; Roefs, Anne; Huibers, Marcus J H; Plumanns, Lana; Krott, Nora; Jansen, Anita

2014-04-01

Emotional eating is associated with overeating and the development of obesity. Yet, empirical evidence for individual (trait) differences in emotional eating and cognitive mechanisms that contribute to eating during sad mood remain equivocal. The aim of this study was to test if attention bias for food moderates the effect of self-reported emotional eating during sad mood (vs neutral mood) on actual food intake. It was expected that emotional eating is predictive of elevated attention for food and higher food intake after an experimentally induced sad mood and that attentional maintenance on food predicts food intake during a sad versus a neutral mood. Participants (N = 85) were randomly assigned to one of the two experimental mood induction conditions (sad/neutral). Attentional biases for high caloric foods were measured by eye tracking during a visual probe task with pictorial food and neutral stimuli. Self-reported emotional eating was assessed with the Dutch Eating Behavior Questionnaire (DEBQ) and ad libitum food intake was tested by a disguised food offer. Hierarchical multivariate regression modeling showed that self-reported emotional eating did not account for changes in attention allocation for food or food intake in either condition. Yet, attention maintenance on food cues was significantly related to increased intake specifically in the neutral condition, but not in the sad mood condition. The current findings show that self-reported emotional eating (based on the DEBQ) might not validly predict who overeats when sad, at least not in a laboratory setting with healthy women. Results further suggest that attention maintenance on food relates to eating motivation when in a neutral affective state, and might therefore be a cognitive mechanism contributing to increased food intake in general, but maybe not during sad mood. Copyright © 2014 Elsevier Ltd. All rights reserved.

National Dam Safety Program. Lake Caroline Dam (Inventory Number VA 03324), Mattaponi River Basin, Caroline County, Virginia. Phase I Inspection Report.

DTIC Science & Technology

1981-04-01

NAM ANDADONS I. PRGRAM ELEMENT. PROJECT, TASKCARA a WORKC UNINUER Lbnabe1 Engineering Associates, P.C. I UBR J. K. Tirmns and Associates, Inc. It...inspections can unsafe conditions be detected and only throug ontinued care and maintenance can these conditions be prevented or corrected. Phase I...downstream toe should be monitored during routine maintenance. It is also recomnended that attempts be made to halt shoreline erosion in order to prevent

Apparatus and process for controlling fluidized beds

DOEpatents

Rehmat, Amirali G.; Patel, Jitendra G.

1985-10-01

An apparatus and process for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance.

Apparatus for controlling fluidized beds

DOEpatents

Rehmat, Amirali G.; Patel, Jitendra G.

1987-05-12

An apparatus and process for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance.

An Interactive Computer-Based Training Program for Beginner Personal Computer Maintenance.

ERIC Educational Resources Information Center

Summers, Valerie Brooke

A computer-assisted instructional program, which was developed for teaching beginning computer maintenance to employees of Unisys, covered external hardware maintenance, proper diskette care, making software backups, and electro-static discharge prevention. The procedure used in developing the program was based upon the Dick and Carey (1985) model…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coble, Jamie B.; Coles, Garill A.; Ramuhalli, Pradeep

Advanced small modular reactors (aSMRs) can provide the United States with a safe, sustainable, and carbon-neutral energy source. The controllable day-to-day costs of aSMRs are expected to be dominated by operation and maintenance costs. Health and condition assessment coupled with online risk monitors can potentially enhance affordability of aSMRs through optimized operational planning and maintenance scheduling. Currently deployed risk monitors are an extension of probabilistic risk assessment (PRA). For complex engineered systems like nuclear power plants, PRA systematically combines event likelihoods and the probability of failure (POF) of key components, so that when combined with the magnitude of possible adversemore » consequences to determine risk. Traditional PRA uses population-based POF information to estimate the average plant risk over time. Currently, most nuclear power plants have a PRA that reflects the as-operated, as-modified plant; this model is updated periodically, typically once a year. Risk monitors expand on living PRA by incorporating changes in the day-by-day plant operation and configuration (e.g., changes in equipment availability, operating regime, environmental conditions). However, population-based POF (or population- and time-based POF) is still used to populate fault trees. Health monitoring techniques can be used to establish condition indicators and monitoring capabilities that indicate the component-specific POF at a desired point in time (or over a desired period), which can then be incorporated in the risk monitor to provide a more accurate estimate of the plant risk in different configurations. This is particularly important for active systems, structures, and components (SSCs) proposed for use in aSMR designs. These SSCs may differ significantly from those used in the operating fleet of light-water reactors (or even in LWR-based SMR designs). Additionally, the operating characteristics of aSMRs can present significantly different requirements, including the need to operate in different coolant environments, higher operating temperatures, and longer operating cycles between planned refueling and maintenance outages. These features, along with the relative lack of operating experience for some of the proposed advanced designs, may limit the ability to estimate event probability and component POF with a high degree of certainty. Incorporating real-time estimates of component POF may compensate for a relative lack of established knowledge about the long-term component behavior and improve operational and maintenance planning and optimization. The particular eccentricities of advanced reactors and small modular reactors provide unique challenges and needs for advanced instrumentation, control, and human-machine interface (ICHMI) techniques such as enhanced risk monitors (ERM) in aSMRs. Several features of aSMR designs increase the need for accurate characterization of the real-time risk during operation and maintenance activities. A number of technical gaps in realizing ERM exist, and these gaps are largely independent of the specific reactor technology. As a result, the development of a framework for ERM would enable greater situational awareness regardless of the specific class of reactor technology. A set of research tasks are identified in a preliminary research plan to enable the development, testing, and demonstration of such a framework. Although some aspects of aSMRs, such as specific operational characteristics, will vary and are not now completely defined, the proposed framework is expected to be relevant regardless of such uncertainty. The development of an ERM framework will provide one of the key technical developments necessary to ensure the economic viability of aSMRs.« less

Implementing a Nitrogen-Based Model for Autotrophic Respiration Using Satellite and Field Observations

NASA Technical Reports Server (NTRS)

Choudhury, Bhaskar J.; Houser, Paul (Technical Monitor)

2001-01-01

The rate of carbon accumulation by terrestrial plant communities in a process-level, mechanistic modeling is the difference of the rate of gross photosynthesis by a canopy (A(sub g)) and autotrophic respiration (R) of the stand. Observations for different biomes often show that R to be a large and variable fraction of A(sub g), ca. 35% to 75%, although other studies suggest the ratio of R and A(sub g) to be less variable. Here, R has been calculated according to the two compartment model as being the sum of maintenance and growth components. The maintenance respiration of foliage and living fine roots for different biomes has been determined objectively from observed nitrogen content of these organs. The sapwood maintenance respiration is based on pipe theory, and checked against an independently derived equation considering sapwood biomass and its maintenance coefficient. The growth respiration has been calculated from the difference of A(sub g) and maintenance respiration. The A(sub g) is obtained as the product of biome-specific radiation use efficiency for gross photosynthesis under unstressed conditions and intercepted photosynthetically active radiation, and adjusted for stress. Calculations have been done using satellite and ground observations for 36 consecutive months (1987-1989) over large contiguous areas (ca. 10(exp 5) sq km) of boreal forests, crop land, temperate deciduous forest, temperate grassland, tropical deciduous forest, tropical evergreen forest, tropical savanna, and tundra. The ratio of annual respiration and gross photosynthesis, (R/A(sub g)), is found to be 0.5-0.6 for temperate and cold adopted biome areas, but somewhat higher for tropical biome areas (0.6-0.7). Interannual variation of the fluxes is found to be generally less than 15%. Calculated fluxes are compared with observations and several previous estimates. Results of sensitivity analysis are presented for uncertainties in parameterization and input data. It is found that uncertainty in determining maintenance respiration for tropical biomes is such that R/A(sub g) for these biomes could be similar to that for temperate biomes.

77 FR 56585 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

... would require performing a high gas generator speed (NG) rating vibration check. We are proposing this... have occurred following ``Level 3'' maintenance operations on the GG Assembly. Some of these maintenance operations may have created an unbalanced condition of the GG rotating assembly and, ultimately...

76 FR 18294 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... learns the condition of operating rules and practices with respect to trains and instructions provided by... Existing On-Track Roadway Maintenance Machines Conforming with Paragraph (a) of This Section. 214.507... stencils. Maintenance Machine (RMM). 214.511--Clearly Identifiable 644 railroads...... 3,700 identified 5...

30 CFR 75.503 - Permissible electric face equipment; maintenance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Permissible electric face equipment...-General § 75.503 Permissible electric face equipment; maintenance. [Statutory Provisions] The operator of each coal mine shall maintain in permissible condition all electric face equipment required by §§ 75...

30 CFR 75.503 - Permissible electric face equipment; maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Permissible electric face equipment...-General § 75.503 Permissible electric face equipment; maintenance. [Statutory Provisions] The operator of each coal mine shall maintain in permissible condition all electric face equipment required by §§ 75...

30 CFR 75.503 - Permissible electric face equipment; maintenance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Permissible electric face equipment...-General § 75.503 Permissible electric face equipment; maintenance. [Statutory Provisions] The operator of each coal mine shall maintain in permissible condition all electric face equipment required by §§ 75...

30 CFR 75.503 - Permissible electric face equipment; maintenance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Permissible electric face equipment...-General § 75.503 Permissible electric face equipment; maintenance. [Statutory Provisions] The operator of each coal mine shall maintain in permissible condition all electric face equipment required by §§ 75...

30 CFR 75.503 - Permissible electric face equipment; maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Permissible electric face equipment...-General § 75.503 Permissible electric face equipment; maintenance. [Statutory Provisions] The operator of each coal mine shall maintain in permissible condition all electric face equipment required by §§ 75...

19 CFR 10.587 - Maintenance of records.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Maintenance of records. 10.587 Section 10.587 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. Dominican Republic-Central America...

19 CFR 10.587 - Maintenance of records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Maintenance of records. 10.587 Section 10.587 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. Dominican Republic-Central America...

19 CFR 10.587 - Maintenance of records.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Maintenance of records. 10.587 Section 10.587 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. Dominican Republic-Central America...

19 CFR 10.587 - Maintenance of records.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Maintenance of records. 10.587 Section 10.587 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. Dominican Republic-Central America...

Comparison of an alternative schedule of extended care contacts to a self-directed control: a randomized trial of weight loss maintenance.

PubMed

Dutton, Gareth R; Gowey, Marissa A; Tan, Fei; Zhou, Dali; Ard, Jamy; Perri, Michael G; Lewis, Cora E

2017-08-15

Behavioral interventions for obesity produce clinically meaningful weight loss, but weight regain following treatment is common. Extended care programs attenuate weight regain and improve weight loss maintenance. However, less is known about the most effective ways to deliver extended care, including contact schedules. We compared the 12-month weight regain of an extended care program utilizing a non-conventional, clustered campaign treatment schedule and a self-directed program among individuals who previously achieved ≥5% weight reductions. Participants (N = 108; mean age = 51.6 years; mean weight = 92.6 kg; 52% African American; 95% female) who achieved ≥5% weight loss during an initial 16-week behavioral obesity treatment were randomized into a 2-arm, 12-month extended care trial. A clustered campaign condition included 12 group-based visits delivered in three, 4-week clusters. A self-directed condition included provision of the same printed intervention materials but no additional treatment visits. The study was conducted in a U.S. academic medical center from 2011 to 2015. Prior to randomization, participants lost an average of -7.55 ± 3.04 kg. Participants randomized to the 12-month clustered campaign program regained significantly less weight (0.35 ± 4.62 kg) than self-directed participants (2.40 ± 3.99 kg), which represented a significant between-group difference of 2.28 kg (p = 0.0154) after covariate adjustments. This corresponded to maintaining 87% and 64% of lost weight in the clustered campaign and self-directed conditions, respectively, which was a significant between-group difference of 29% maintenance of lost weight after covariate adjustments, p = 0.0396. In this initial test of a clustered campaign treatment schedule, this novel approach effectively promoted 12-month maintenance of lost weight. Future trials should directly compare the clustered campaigns with conventional (e.g., monthly) extended care schedules. Clinicaltrials.gov NCT02487121 . Registered 06/26/2015 (retrospectively registered).

The nursing perspective on monitoring hemodynamics and oxygen transport.

PubMed

Tucker, Dawn; Hazinski, Mary Fran

2011-07-01

Maintenance of adequate systemic oxygen delivery requires careful clinical assessment integrated with hemodynamic measurements and calculations to detect and treat conditions that may compromise oxygen delivery and lead to life-threatening shock, respiratory failure, or cardiac arrest. The bedside nurse constantly performs such assessments and measurements to detect subtle changes and trends in patient condition. The purpose of this editorial is to highlight nursing perspectives about the hemodynamic and oxygen transport monitoring systems summarized in the Pediatric Cardiac Intensive Care Society Evidence- Based Review and Consensus Statement on Monitoring of Hemodynamics and Oxygen Transport Balance. There is no substitute for the observations of a knowledgeable and experienced clinician who understands the patient's condition and potential causes of deterioration and is able to evaluate response to therapy.

Orbit Transfer Rocket Engine Technology Program: Advanced engine study, task D.1/D.3

NASA Technical Reports Server (NTRS)

Martinez, A.; Erickson, C.; Hines, B.

1986-01-01

Concepts for space maintainability of OTV engines were examined. An engine design was developed which was driven by space maintenance requirements and by a failure mode and effects (FME) analysis. Modularity within the engine was shown to offer cost benefits and improved space maintenance capabilities. Space operable disconnects were conceptualized for both engine change-out and for module replacement. Through FME mitigation the modules were conceptualized to contain the least reliable and most often replaced engine components. A preliminary space maintenance plan was developed around a controls and condition monitoring system using advanced sensors, controls, and condition monitoring concepts. A complete engine layout was prepared satisfying current vehicle requirements and utilizing projected component advanced technologies. A technology plan for developing the required technology was assembled.

Informed maintenance for next generation space transportation systems

NASA Astrophysics Data System (ADS)

Fox, Jack J.

2001-02-01

Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives-maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance. The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring system software. This paper will summarize NASA's long-term strategy, development, and implementation plans for Informed Maintenance for next generation RLVs. This will be done through a convergence into a single IM vision the work being performed throughout NASA, industry and academia. Additionally, a current status of IM development throughout NASA programs such as the Space Shuttle, X-33, X-34 and X-37 will be provided and will conclude with an overview of near-term work that is being initiated in FY00 to support NASA's 2nd Generation Reusable Launch Vehicle Program. .

Informed maintenance for next generation reusable launch systems

NASA Astrophysics Data System (ADS)

Fox, Jack J.; Gormley, Thomas J.

2001-03-01

Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives - maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance. The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring system software. This paper will summarize NASA's long-term strategy, development, and implementation plans for Informed Maintenance for next generation RLVs. This will be done through a convergence into a single IM vision the work being performed throughout NASA, industry and academia. Additionally, a current status of IM development throughout NASA programs such as the Space Shuttle, X-33, X-34 and X-37 will be provided and will conclude with an overview of near-term work that is being initiated in FY00 to support NASA's 2 nd Generation Reusable Launch Vehicle Program.

EX.MAIN. Expert System Model for Maintenance and Staff Training.

ERIC Educational Resources Information Center

Masturzi, Elio R.

EX.MAIN, a model for maintenance and staff training which combines knowledge based expert systems and computer based training, was developed jointly by the Department of Production Engineering of the University of Naples and CIRCUMVESUVIANA, the largest private railroad in Italy. It is a global model in the maintenance field which contains both…

78 FR 4377 - Idaho Panhandle National Forests, Coeur d'Alene River Ranger District, Shoshone County, ID...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... organisms, and improve the longevity of road conditions by reducing maintenance costs and providing for long... storage, road reconstruction and maintenance, site preparation, reforestation, and fuel break development...); prescribed burning not associated with timber harvest; and watershed restoration (decommissioning roads...

Boosting Maintenance in Working Memory with Temporal Regularities

ERIC Educational Resources Information Center

Plancher, Gaën; Lévêque, Yohana; Fanuel, Lison; Piquandet, Gaëlle; Tillmann, Barbara

2018-01-01

Music cognition research has provided evidence for the benefit of temporally regular structures guiding attention over time. The present study investigated whether maintenance in working memory can benefit from an isochronous rhythm. Participants were asked to remember series of 6 letters for serial recall. In the rhythm condition of Experiment…

Identification of HVAC (Heating, Ventilating, and Air Conditioning) Deficiencies Using Analysis of Job Order Data

DTIC Science & Technology

1989-09-01

Maintenance Evaluation Team ( MEMET ), stated, in his booklet To Aspire For Excellence, the need for emphasis on product- oriented performance (3:17). Existing...JOAGE - Job Order/Facility Age JOSF - Job Order/Facility Square Feet LSD - Least Significant Difference MEMET - Mechanical Equipment Maintenance

18 CFR 12.12 - Maintenance of records.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT SAFETY OF WATER POWER PROJECTS AND PROJECT WORKS Reports and Records § 12.12 Maintenance of records. (a) Kinds of records—1) General rule. Except as... project works; and (B) Any reports of project modifications, conditions affecting the safety of the...

Maximize Benefits, Minimize Risk: Selecting the Right HVAC Firm.

ERIC Educational Resources Information Center

Golden, James T.

1993-01-01

An informal survey of 20 major urban school districts found that 40% were currently operating in a "break down" maintenance mode. A majority, 57.9%, also indicated they saw considerable benefits in contracting for heating, ventilating, and air conditioning (HVAC) maintenance services with outside firms. Offers guidelines in selecting…

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Gate arm. 234.223 Section 234.223 Transportation... SYSTEMS Maintenance, Inspection, and Testing Maintenance Standards § 234.223 Gate arm. Each gate arm, when... maintained in a condition sufficient to be clearly viewed by approaching highway users. Each gate arm shall...

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Gate arm. 234.223 Section 234.223 Transportation... SYSTEMS Maintenance, Inspection, and Testing Maintenance Standards § 234.223 Gate arm. Each gate arm, when... maintained in a condition sufficient to be clearly viewed by approaching highway users. Each gate arm shall...

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Gate arm. 234.223 Section 234.223 Transportation... SYSTEMS Maintenance, Inspection, and Testing Maintenance Standards § 234.223 Gate arm. Each gate arm, when... maintained in a condition sufficient to be clearly viewed by approaching highway users. Each gate arm shall...

50 CFR 13.46 - Maintenance of records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... GENERAL PERMIT PROCEDURES Conditions § 13.46 Maintenance of records. From the date of issuance of the... seeds) or wildlife pursuant to such permit. Such records shall be kept current and shall include names and addresses of persons with whom any plant obtained from the wild (excluding seeds) or wildlife has...

50 CFR 13.46 - Maintenance of records.

Code of Federal Regulations, 2014 CFR

2014-10-01

... GENERAL PERMIT PROCEDURES Conditions § 13.46 Maintenance of records. From the date of issuance of the... seeds) or wildlife pursuant to such permit. Such records shall be kept current and shall include names and addresses of persons with whom any plant obtained from the wild (excluding seeds) or wildlife has...

50 CFR 13.46 - Maintenance of records.

Code of Federal Regulations, 2013 CFR

2013-10-01

... GENERAL PERMIT PROCEDURES Conditions § 13.46 Maintenance of records. From the date of issuance of the... seeds) or wildlife pursuant to such permit. Such records shall be kept current and shall include names and addresses of persons with whom any plant obtained from the wild (excluding seeds) or wildlife has...

50 CFR 13.46 - Maintenance of records.

Code of Federal Regulations, 2012 CFR

2012-10-01

... GENERAL PERMIT PROCEDURES Conditions § 13.46 Maintenance of records. From the date of issuance of the... seeds) or wildlife pursuant to such permit. Such records shall be kept current and shall include names and addresses of persons with whom any plant obtained from the wild (excluding seeds) or wildlife has...

50 CFR 13.46 - Maintenance of records.

Code of Federal Regulations, 2011 CFR

2011-10-01

... GENERAL PERMIT PROCEDURES Conditions § 13.46 Maintenance of records. From the date of issuance of the... seeds) or wildlife pursuant to such permit. Such records shall be kept current and shall include names and addresses of persons with whom any plant obtained from the wild (excluding seeds) or wildlife has...

40 CFR 142.307 - What terms and conditions must be included in a small system variance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... that may affect proper and effective operation and maintenance of the technology; (2) Monitoring... effective installation, operation and maintenance of the applicable small system variance technology in... health, which may include: (i) Public education requirements; and (ii) Source water protection...

19 CFR 10.767 - Maintenance of records.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maintenance of records. 10.767 Section 10.767 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Morocco Free Trade...

45 CFR 152.39 - Maintenance of effort.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-EXISTING CONDITION INSURANCE PLAN PROGRAM Relationship to Existing Laws and Programs § 152.39 Maintenance... the contract is entered. (b) Failure to maintain efforts. In situations where a State enters into a..., against any State that fails to maintain funding levels for existing State high risk pools as required...

19 CFR 10.867 - Maintenance of records.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Maintenance of records. 10.867 Section 10.867 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman Free Trade...

19 CFR 10.867 - Maintenance of records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Maintenance of records. 10.867 Section 10.867 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman Free Trade...

19 CFR 10.867 - Maintenance of records.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Maintenance of records. 10.867 Section 10.867 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman Free Trade...

19 CFR 10.867 - Maintenance of records.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Maintenance of records. 10.867 Section 10.867 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman Free Trade...

Maintenance, Generalization, and Treatment Relapse: A Behavioral Momentum Analysis

ERIC Educational Resources Information Center

Mace, F. Charles; Nevin, John A.

2017-01-01

Maintenance and generalization have been inconsistently defined in the behavior analytic literature. The term "treatment relapse" is used commonly in the medical and mental health literature to refer to the return of a condition that was previously considered successfully treated. Basic behavioral researchers have studied relapse related…

21 CFR 529.1115 - Halothane.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... (c) Conditions of use—(1) Amount. Two to 5 percent of inhaled atmosphere for induction of anesthesia; 0.5 to 2 percent for maintenance of anesthesia. (2) Indications for use. For nonfood animals for the induction and maintenance of anesthesia. (3) Limitations. Not for use in animals intended for food. Federal...

The effect of training in reduced energy density eating and food self-monitoring accuracy on weight loss maintenance.

PubMed

Lowe, Michael R; Tappe, Karyn A; Annunziato, Rachel A; Riddell, Lynnette J; Coletta, Maria C; Crerand, Canice E; Didie, Elizabeth R; Ochner, Christopher N; McKinney, Shortie

2008-09-01

Failure to maintain weight losses in lifestyle change programs continues to be a major problem and warrants investigation of innovative approaches to weight control. The goal of this study was to compare two novel group interventions, both aimed at improving weight loss maintenance, with a control group. A total of 103 women lost weight on a meal replacement-supplemented diet and were then randomized to one of three conditions for the 14-week maintenance phase: cognitive-behavioral treatment (CBT); CBT with an enhanced food monitoring accuracy (EFMA) program; or these two interventions plus a reduced energy density eating (REDE) program. Assessments were conducted periodically through an 18-month postintervention. Outcome measures included weight and self-reported dietary intake. Data were analyzed using completers only as well as baseline-carried-forward imputation. Participants lost an average of 7.6 +/- 2.6 kg during the weight loss phase and 1.8 +/- 2.3 kg during the maintenance phase. Results do not suggest that the EFMA intervention was successful in improving food monitoring accuracy. The REDE group decreased the energy density (ED) of their diets more so than the other two groups. However, neither the REDE nor the EFMA condition showed any advantage in weight loss maintenance. All groups regained weight between 6- and 18-month follow-ups. Although no incremental weight maintenance benefit was observed in the EFMA or EFMA + REDE groups, the improvement in the ED of the REDE group's diet, if shown to be sustainable in future studies, could have weight maintenance benefits.

New optimization strategies of pavement maintenance: A case study for national road network in Indonesia using integrated road management system

NASA Astrophysics Data System (ADS)

Hamdi, Hadiwardoyo, Sigit P.; Correia, A. Gomes; Pereira, Paulo

2017-06-01

A road network requires timely maintenance to keep the road surface in good condition onward better services to improve accessibility and mobility. Strategies and maintenance techniques must be chosen in order to maximize road service level through cost-effective interventions. This approach requires an updated database, which the road network in Indonesia is supported by a manual and visual survey, also using NAASRA profiler. Furthermore, in this paper, the deterministic model of deterioration was used. This optimization model uses life cycle cost analysis (LCCA), applied in an integrated manner, using IRI indicator, and allows determining the priority of treatment, type of treatment and its relation to the cost. The purpose of this paper was focussed on the aspects of road maintenance management, i.e., maintenance optimization models for different levels of traffic and various initial of road distress conditions on the national road network in Indonesia. The implementation of Integrated Road Management System (IRMS) can provide a solution to the problem of cost constraints in the maintenance of the national road network. The results from this study found that as the lowest as agency cost, it will affect the increasing of user cost. With the achievement of the target plan scenario Pl000 with initial value IRI 2, it was found that the routine management throughout the year and in early reconstruction and periodic maintenance with a 30 mm thick overlay, will simultaneously provide a higher net benefit value and has the lowest total cost of transportation.

The Impact Of Occupational Hazards In Workplaces - Maintenance, A Main Target For Ensuring The Safety Of Working Equipment

NASA Astrophysics Data System (ADS)

Antonov, Anca Elena; Buica, Georgeta; Darabont, Doru Costin; Beiu, Constantin

2015-07-01

For use of work equipment having the economic performance and the highest level of safety, it must be ensured that it complies with the conditions set by the manufacturer in terms of putting into service, use and maintenance operations, ensuring appropriate technical and environmental requirements, including appropriate measures and means of protection. The research aimed to identify and analyze the occupational hazards associated to maintenance operations, in terms of the history of the adjustments, maintenance, cleaning and repair, including the case that occur after the incidents, capital repairs and upgrades. The results of the research consisted in the development of recommendations on the effective management of maintenance activities of work equipment and a software model to enable an efficient management of maintenance, as a tool for occupational hazards in companies - premise for increasing the competitiveness of employers in the market economy.

e-Learning Content Design for Corrective Maintenance of Toshiba BMC 80.5 based on Knowledge Conversion using SECI Method: A Case Study in Aerospace Company

NASA Astrophysics Data System (ADS)

Permata Shabrina, Ayu; Pramuditya Soesanto, Rayinda; Kurniawati, Amelia; Teguh Kurniawan, Mochamad; Andrawina, Luciana

2018-03-01

Knowledge is a combination of experience, value, and information that is based on the intuition that allows an organization to evaluate and combine new information. In an organization, knowledge is not only attached to document but also in routine value creating activities, therefore knowledge is an important asset for the organization. X Corp is a company that focused on manufacturing aerospace components. In carrying out the production process, the company is supported by various machines, one of the machines is Toshiba BMC 80.5. The machine is used occasionally and therefore maintenance activity is needed, especially corrective maintenance. Corrective maintenance is done to make a breakdown machine back to work. Corrective maintenance is done by maintenance operator whose retirement year is close. The long term experience of the maintenance operator needs to be captured by the organization and shared across maintenance division. E-learning is one type of media that can support and assist knowledge sharing. This research purpose is to create the e-learning content for best practice of corrective maintenance activity for Toshiba BMC 80.5 by extracting the knowledge and experience from the operator based on knowledge conversion using SECI method. The knowledge source in this research is a maintenance supervisor and a senior maintenance engineer. From the evaluation of the e-learning content, it is known that the average test score of the respondents who use the e-learning increases from 77.5 to 87.5.

[Web-based support system for medical device maintenance].

PubMed

Zhao, Jinhai; Hou, Wensheng; Chen, Haiyan; Tang, Wei; Wang, Yihui

2015-01-01

A Web-based technology system was put forward aiming at the actual problems of the long maintenance cycle and the difficulties of the maintenance and repairing of medical equipments. Based on analysis of platform system structure and function, using the key technologies such as search engine, BBS, knowledge base and etc, a platform for medical equipment service technician to use by online or offline was designed. The platform provides users with knowledge services and interactive services, enabling users to get a more ideal solution.

Portable oil bath for high-accuracy resistance transfer and maintenance

NASA Astrophysics Data System (ADS)

Shiota, Fuyuhiko

1999-10-01

A portable oil bath containing one standard resistor for high-accuracy resistance transfer and maintenance was developed and operated for seven years in the National Research Laboratory of Metrology. The aim of the bath is to save labor and apparatus for high-accuracy resistance transfer and maintenance by consistently keeping the standard resistor in an optimum environmental condition. The details of the prototype system, including its performance, are described together with some suggestions for a more practical bath design, which adopts the same concept.

Intelligent Operation and Maintenance of Micro-grid Technology and System Development

NASA Astrophysics Data System (ADS)

Fu, Ming; Song, Jinyan; Zhao, Jingtao; Du, Jian

2018-01-01

In order to achieve the micro-grid operation and management, Studying the micro-grid operation and maintenance knowledge base. Based on the advanced Petri net theory, the fault diagnosis model of micro-grid is established, and the intelligent diagnosis and analysis method of micro-grid fault is put forward. Based on the technology, the functional system and architecture of the intelligent operation and maintenance system of micro-grid are studied, and the microcomputer fault diagnosis function is introduced in detail. Finally, the system is deployed based on the micro-grid of a park, and the micro-grid fault diagnosis and analysis is carried out based on the micro-grid operation. The system operation and maintenance function interface is displayed, which verifies the correctness and reliability of the system.

Air Vehicle Integration and Technology Research (AVIATR). Delivery Order 0003: Condition-Based Maintenance Plus Structural Integrity (CBM+SI) Demonstration

DTIC Science & Technology

2009-08-01

K/sigma vs a file Selected design load and material Full scale test results IAT Actual Fracture toughness distribution Selected material...update data from 5.3.4 a vs T file Selected design load and material Full scale test results IAT Actual Max stress Gumbel Dist. (loads exceedance... altitude ; Mach number; control surface positions; selected strain measurements; ground loads; aerodynamic excitations; etc. Data shall also be

A Vibration-Based Approach for Stator Winding Fault Diagnosis of Induction Motors: Application of Envelope Analysis

DTIC Science & Technology

2014-10-02

takes it either as auxiliary to magnetic flux, or is not able to detect the winding faults unless severity is already quite significant. This paper...different loads, speeds and severity levels. The experimental results show that the proposed method was able to detect inter-turn faults in the...maintenance strategy requires the technologies of: (a) on- line condition monitoring, (b) fault detection and diagnosis, and (c) prognostics. Figure 1

Rap1 GTPase is required for mouse lens epithelial maintenance and morphogenesis

PubMed Central

Maddala, Rupalatha; Nagendran, Tharkika; Lang, Richard A.; Morozov, Alexei; Rao, Ponugoti V.

2015-01-01

Rap1, a Ras-like small GTPase, plays a crucial role in cell-matrix adhesive interactions, cell-cell junction formation, cell polarity and migration. The role of Rap1 in vertebrate organ development and tissue architecture, however, remains elusive. We addressed this question in a mouse lens model system using a conditional gene targeting approach. While individual germline deficiency of either Rap1a or Rap1b did not cause overt defects in mouse lens, conditional double deficiency (Rap1 cKO) prior to lens placode formation led to an ocular phenotype including microphthalmia and lens opacification in embryonic mice. The embryonic Rap1 cKO mouse lens exhibited striking defects including loss of E-cadherin- and ZO-1-based cell-cell junctions, disruption of paxillin and β1-integrin-based cell adhesive interactions along with abnormalities in cell shape and apical-basal polarity of epithelium. These epithelial changes were accompanied by increased levels of α-smooth muscle actin, vimentin and N-cadherin, and expression of transcriptional suppressors of E-cadherin (Snai1, Slug and Zeb2), and a mesenchymal metabolic protein (Dihydropyrimidine dehydrogenase). Additionally, while lens differentiation was not overtly affected, increased apoptosis and dysregulated cell cycle progression were noted in epithelium and fibers in Rap1 cKO mice. Collectively these observations uncover a requirement for Rap1 in maintenance of lens epithelial phenotype and morphogenesis. PMID:26212757

Keystone Species, Forest and Landscape: A Model to Select Protected Areas

NASA Astrophysics Data System (ADS)

Lins, Daniela Barbosa da Silva; Gardon, Fernando Ravanini; Meyer, João Frederico da Costa Azevedo; Santos, Rozely Ferreira dos

2017-06-01

The selection of forest fragments for conservation is usually based on spatial parameters as forest size and canopy integrity. This strategy assumes that chosen fragments present high conservation status, ensuring biodiversity and ecological functions. We argue that a well-preserved forest fragment that remains connected by the landscape structure, does not necessarily hold attributes that ensure the presence of keystone species. We also discuss that the presence of keystone species does not always mean that it has the best conditions for its occurrence and maintenance. We developed a model to select areas in forest landscapes to be prioritized for protection based on suitability curves that unify and compare spatial indicators of three categories: forest fragment quality, landscape quality, and environmental conditions for the occurrence of a keystone species. We use a case study to compare different suitability degrees for Euterpe edulis presence, considered an important functional element in Atlantic Forest (São Paulo, Brazil) landscapes and a forest resource for local people. The results show that the identification of medium or advanced stage fragments as singular indicator of forest quality does not guarantee the existence or maintenance of this keystone species. Even in some well-preserved forest fragments, connected to others and with palm presence, the reverse J-shaped distribution of the population size structure is not sustained and these forests continue to be threatened due to human disturbances.

Maintenance of polygenic sex determination in a fluctuating environment: an individual-based model.

PubMed

Bateman, A W; Anholt, B R

2017-05-01

R. A. Fisher predicted that individuals should invest equally in offspring of both sexes, and that the proportion of males and females produced (the primary sex ratio) should evolve towards 1:1 when unconstrained. For many species, sex determination is dependent on sex chromosomes, creating a strong tendency for balanced sex ratios, but in other cases, multiple autosomal genes interact to determine sex. In such cases, the maintenance of multiple sex-determining alleles at multiple loci and the consequent among-family variability in sex ratios presents a puzzle, as theory predicts that such systems should be unstable. Theory also predicts that environmental influences on sex can complicate outcomes of genetic sex determination, and that population structure may play a role. Tigriopus californicus, a copepod that lives in splash-pool metapopulations and exhibits polygenic and environment-dependent sex determination, presents a test case for relevant theory. We use this species as a model for parameterizing an individual-based simulation to investigate conditions that could maintain polygenic sex determination. We find that metapopulation structure can delay the degradation of polygenic sex determination and that periods of alternating frequency-dependent selection, imposed by seasonal fluctuations in environmental conditions, can maintain polygenic sex determination indefinitely. © 2017 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2017 European Society For Evolutionary Biology.

N-Acetylcysteine reduces cocaine-cue attentional bias and differentially alters cocaine self-administration based on dosing order.

PubMed

Levi Bolin, B; Alcorn, Joseph L; Lile, Joshua A; Rush, Craig R; Rayapati, Abner O; Hays, Lon R; Stoops, William W

2017-09-01

Disrupted glutamate homeostasis is thought to contribute to cocaine-use disorder, in particular, by enhancing the incentive salience of cocaine stimuli. n-Acetylcysteine might be useful in cocaine-use disorder by normalizing glutamate function. In prior studies, n-acetylcysteine blocked the reinstatement of cocaine seeking in laboratory animals and reduced the salience of cocaine stimuli and delayed relapse in humans. The present study determined the ability of maintenance on n-acetylcysteine (0 or 2400mg/day, counterbalanced) to reduce the incentive salience of cocaine stimuli, as measured by an attentional bias task, and attenuate intranasal cocaine self-administration (0, 30, and 60mg). Fourteen individuals (N=14) who met criteria for cocaine abuse or dependence completed this within-subjects, double-blind, crossover-design study. Cocaine-cue attentional bias was greatest following administration of 0mg cocaine during placebo maintenance, and was attenuated by n-acetylcysteine. Cocaine maintained responding during placebo and n-acetylcysteine maintenance, but the reinforcing effects of cocaine were significantly attenuated across both maintenance conditions in participants maintained on n-acetylcysteine first compared to participants maintained on placebo first. These results collectively suggest that a reduction in the incentive salience of cocaine-related stimuli during n-acetylcysteine maintenance may be accompanied by reductions in cocaine self-administration. These results are in agreement with, and link, prior preclinical and clinical trial results suggesting that n-acetylcysteine might be useful for preventing cocaine relapse by attenuating the incentive salience of cocaine cues. Copyright © 2017 Elsevier B.V. All rights reserved.

Developing mobile- and BIM-based integrated visual facility maintenance management system.

PubMed

Lin, Yu-Cheng; Su, Yu-Chih

2013-01-01

Facility maintenance management (FMM) has become an important topic for research on the operation phase of the construction life cycle. Managing FMM effectively is extremely difficult owing to various factors and environments. One of the difficulties is the performance of 2D graphics when depicting maintenance service. Building information modeling (BIM) uses precise geometry and relevant data to support the maintenance service of facilities depicted in 3D object-oriented CAD. This paper proposes a new and practical methodology with application to FMM using BIM technology. Using BIM technology, this study proposes a BIM-based facility maintenance management (BIMFMM) system for maintenance staff in the operation and maintenance phase. The BIMFMM system is then applied in selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FMM practice. Using the BIMFMM system, maintenance staff can access and review 3D BIM models for updating related maintenance records in a digital format. Moreover, this study presents a generic system architecture and its implementation. The combined results demonstrate that a BIMFMM-like system can be an effective visual FMM tool.

42 CFR 417.418 - Qualifying condition: Quality assurance program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS Qualifying Conditions for Medicare Contracts § 417.418...

Historic Structure Assessment for Building 839, Carlisle Barracks: Carlisle, Pennsylvania

DTIC Science & Technology

2017-10-01

Ratings 3 Conditions Assessment Survey Introduction Site Visit Summary of Findings Building Feature Master List Condition Assessment Reports...that guide the project; 4. Condition Assessment Survey : architectural fabric survey and assessment, summary of condition ratings, and maintenance...Barracks September 2017 End of Chapter 2 Condition Assessment Survey

Beta-adrenergic stimulation contributes to maintenance of endothelial barrier functions under baseline conditions.

PubMed

Spindler, Volker; Waschke, Jens

2011-02-01

cAMP signaling within the endothelium is known to reduce paracellular permeability and to protect against loss of barrier functions under various pathological conditions. Because activation of β-adrenergic receptors elevates cellular cAMP, we tested whether β-adrenergic receptor signaling contributes to the maintenance of baseline endothelial barrier properties. We compared hydraulic conductivity of rat postcapillary venules in vivo with resistance measurements and with reorganization of endothelial adherens junctions in cultured microvascular endothelial cells downstream of β-adrenergic receptor-mediated changes of cAMP levels. Inhibition of β-adrenergic receptors by propranolol increased hydraulic conductivity, reduced both cAMP levels and TER of microvascular endothelial cell monolayers and induced fragmentation of VE-cadherin staining. In contrast, activation by epinephrine both increased cAMP levels and TER and resulted in linearized VE-cadherin distribution, however this was not sufficient to block barrier-destabilization by propranolol. Similarly, PDE inhibition did not prevent propranolol-induced TER reduction and VE-cadherin reorganization whereas increased cAMP formation by AC activation enhanced endothelial barrier functions under baseline conditions and under conditions of propranolol treatment. Our results indicate that generation of cAMP mediated by activation of β-adrenergic receptor signaling contributes to the maintenance of endothelial barrier properties under baseline conditions. © 2011 John Wiley & Sons Ltd.

Antidepressant monotherapy vs sequential pharmacotherapy and mindfulness-based cognitive therapy, or placebo, for relapse prophylaxis in recurrent depression.

PubMed

Segal, Zindel V; Bieling, Peter; Young, Trevor; MacQueen, Glenda; Cooke, Robert; Martin, Lawrence; Bloch, Richard; Levitan, Robert D

2010-12-01

Mindfulness-based cognitive therapy (MBCT) is a group-based psychosocial intervention designed to enhance self-management of prodromal symptoms associated with depressive relapse. To compare rates of relapse in depressed patients in remission receiving MBCT against maintenance antidepressant pharmacotherapy, the current standard of care. Patients who met remission criteria after 8 months of algorithm-informed antidepressant treatment were randomized to receive maintenance antidepressant medication, MBCT, or placebo and were followed up for 18 months. Outpatient clinics at the Centre for Addiction and Mental Health, Toronto, Ontario, Canada, and St Joseph's Healthcare, Hamilton, Ontario. One hundred sixty patients aged 18 to 65 years meeting DSM-IV criteria for major depressive disorder with a minimum of 2 past episodes. Of these, 84 achieved remission (52.5%) and were assigned to 1 of the 3 study conditions. Patients in remission discontinued their antidepressants and attended 8 weekly group sessions of MBCT, continued taking their therapeutic dose of antidepressant medication, or discontinued active medication and were switched to placebo. Relapse was defined as a return, for at least 2 weeks, of symptoms sufficient to meet the criteria for major depression on module A of the Structured Clinical Interview for DSM-IV. Intention-to-treat analyses showed a significant interaction between the quality of acute-phase remission and subsequent prevention of relapse in randomized patients (P = .03). Among unstable remitters (1 or more Hamilton Rating Scale for Depression score >7 during remission), patients in both MBCT and maintenance treatment showed a 73% decrease in hazard compared with placebo (P = .03), whereas for stable remitters (all Hamilton Rating Scale for Depression scores ≤7 during remission) there were no group differences in survival. For depressed patients achieving stable or unstable clinical remission, MBCT offers protection against relapse/recurrence on a par with that of maintenance antidepressant pharmacotherapy. Our data also highlight the importance of maintaining at least 1 long-term active treatment in unstable remitters.

Structural Health and Prognostics Management for Offshore Wind Turbines: Sensitivity Analysis of Rotor Fault and Blade Damage with O&M Cost Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myrent, Noah J.; Barrett, Natalie C.; Adams, Douglas E.

2014-07-01

Operations and maintenance costs for offshore wind plants are significantly higher than the current costs for land-based (onshore) wind plants. One way to reduce these costs would be to implement a structural health and prognostic management (SHPM) system as part of a condition based maintenance paradigm with smart load management and utilize a state-based cost model to assess the economics associated with use of the SHPM system. To facilitate the development of such a system a multi-scale modeling and simulation approach developed in prior work is used to identify how the underlying physics of the system are affected by themore » presence of damage and faults, and how these changes manifest themselves in the operational response of a full turbine. This methodology was used to investigate two case studies: (1) the effects of rotor imbalance due to pitch error (aerodynamic imbalance) and mass imbalance and (2) disbond of the shear web; both on a 5-MW offshore wind turbine in the present report. Sensitivity analyses were carried out for the detection strategies of rotor imbalance and shear web disbond developed in prior work by evaluating the robustness of key measurement parameters in the presence of varying wind speeds, horizontal shear, and turbulence. Detection strategies were refined for these fault mechanisms and probabilities of detection were calculated. For all three fault mechanisms, the probability of detection was 96% or higher for the optimized wind speed ranges of the laminar, 30% horizontal shear, and 60% horizontal shear wind profiles. The revised cost model provided insight into the estimated savings in operations and maintenance costs as they relate to the characteristics of the SHPM system. The integration of the health monitoring information and O&M cost versus damage/fault severity information provides the initial steps to identify processes to reduce operations and maintenance costs for an offshore wind farm while increasing turbine availability, revenue, and overall profit.« less

Maintenance and Drainage Guidance for the Scott Base Transition, Antarctica

DTIC Science & Technology

2014-10-01

Way Centennial , CO 80112-3938 Final Report Approved for public release; distribution is unlimited. Prepared for National Science Foundation...References Antarctic Support Contract (ASC). 2014. Scott Base Transition Construction and Maintenance Manual. IO-MAN-0003. Centennial , CO: Antarctic...Support Contract. Antarctic Support Contract (ASC). Forthcoming. Snow Road Construction and Maintenance Manual. IO-MAN-xx. Centennial , CO: Antarctic

GxG epistasis in growth and condition and the maintenance of genetic polymorphism in Gambusia holbrooki.

PubMed

Culumber, Zachary W; Kraft, Brittany; Lemakos, Valerie; Hoffner, Erika; Travis, Joseph; Hughes, Kimberly A

2018-05-01

Theory on indirect genetic effects (IGEs) indicates that variation in the genetic composition of social groups can generate GxG epistasis that may promote the evolution of stable polymorphisms. Using a livebearing fish with a genetic polymorphism in coloration and associated behavioral differences, we tested whether genotypes of social partners interacted with focal individual genotypes to influence growth and condition over 16 weeks of development. We found that IGEs had a significant influence on patterns of feeding, regardless of focal fish genotype. There was no influence of social environment on juvenile length, but there was significant GxG epistasis for body condition. Each focal juvenile was in better condition when its own genotype was not present in adult social partners. These data are consistent with negative frequency-dependent selection in which each morph performs better when it is rare. Neither variation in feeding nor activity-related behaviors explained variation in body condition, suggesting that GxG epistasis for condition was caused by physiological differences between the two genotypes. These findings indicate that GxG epistasis in a given polymorphism can generate fitness landscapes that contribute to the maintenance of that polymorphism and to maintenance of genetic variation for additional fitness-related traits. © 2018 The Author(s). Evolution © 2018 The Society for the Study of Evolution.

Apparatus for controlling fluidized beds

DOEpatents

Rehmat, A.G.; Patel, J.G.

1987-05-12

An apparatus and process are disclosed for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance. 2 figs.

Conditioning of the vacuum system of the TPS storage ring without baking in situ

NASA Astrophysics Data System (ADS)

Chan, C. K.; Chang, C. C.; Shueh, C.; Yang, I. C.; Wu, L. H.; Chen, B. Y.; Cheng, C. M.; Huang, Y. T.; Chuang, J. Y.; Cheng, Y. T.; Hsiao, Y. M.; Sheng, Albert

2017-04-01

To shorten the machine downtime, a maintenance procedure without baking in situ has been developed and applied to maintain and to upgrade the vacuum system of the TPS storage ring. The data of photon-stimulated desorption (PSD) reveal no obvious discrepancy between baking and not baking the vacuum system in situ. A beam-conditioning dose of extent only 11.8 A h is required to recover quickly the dynamic pressure of an unbaked vacuum system to its pre-intervention value according to the TPS maintenance experience.

Validation of Helicopter Gear Condition Indicators Using Seeded Fault Tests

NASA Technical Reports Server (NTRS)

Dempsey, Paula; Brandon, E. Bruce

2013-01-01

A "seeded fault test" in support of a rotorcraft condition based maintenance program (CBM), is an experiment in which a component is tested with a known fault while health monitoring data is collected. These tests are performed at operating conditions comparable to operating conditions the component would be exposed to while installed on the aircraft. Performance of seeded fault tests is one method used to provide evidence that a Health Usage Monitoring System (HUMS) can replace current maintenance practices required for aircraft airworthiness. Actual in-service experience of the HUMS detecting a component fault is another validation method. This paper will discuss a hybrid validation approach that combines in service-data with seeded fault tests. For this approach, existing in-service HUMS flight data from a naturally occurring component fault will be used to define a component seeded fault test. An example, using spiral bevel gears as the targeted component, will be presented. Since the U.S. Army has begun to develop standards for using seeded fault tests for HUMS validation, the hybrid approach will be mapped to the steps defined within their Aeronautical Design Standard Handbook for CBM. This paper will step through their defined processes, and identify additional steps that may be required when using component test rig fault tests to demonstrate helicopter CI performance. The discussion within this paper will provide the reader with a better appreciation for the challenges faced when defining a seeded fault test for HUMS validation.

Is bearing resistance negligible during wheelchair locomotion? Design and validation of a testing device.

PubMed

Bascou, Joseph; Sauret, Christophe; Lavaste, Francois; Pillet, Hélène

2017-01-01

Among the different resistances occurring during wheelchair locomotion and that limit the user autonomy, bearing resistance is generally neglected, based on a few studies carried out in static conditions and by manufacturer's assertion. Therefore, no special attention is generally paid to the mounting and the maintenance of manual wheelchair bearings. However, the effect of inadequate mounting or maintenance on wheelchair bearing resistance has still to be clarified. This study aimed at filling this gap by developing and validating a specific device allowing the measurement of wheelchair bearing friction, characterized by low speed velocities, with an accuracy lower than 0.003 Nm. The bearing resistance measured by the device was compared to free deceleration measurement, intra and inter operator reproducibility were assessed. A factorial experiment allowed the effects of various functioning parameters (axial and radial loads, velocity) to be classified. The device allowed significant differences in the bearing resistance of static and rotating conditions to be measured, even if a relatively high proportionality was found between both conditions. The factorial experiment allowed the expected impact of the radial load on bearing resistance as well as the predominant effect of the axial load to be demonstrated. As a consequence, it appeared that the control of the axial load is compulsory for measurement purposes or during wheel mounting, to avoid significant increase of global resistance during wheelchair locomotion. The findings of this study could help enhancing the models which assess manual wheelchair mechanical power from its settings and use conditions.

On the Necessity of Changes in the Strategy of Utilization Ship Boiler Technical Condition Maintenance in the Aspect of LNG Applied as Fuel

NASA Astrophysics Data System (ADS)

Adamkiewicz, Andrzej; Zeńczak, Wojciech

2017-03-01

Heavy oils (HFO fuels) used on ships play a part in degradation of technical condition of heat exchange surfaces of utilization boilers especially on the exhaust gas side. Presence of sulphur in these fuels is the main factor favouring degradation. The upper limit for sulphur content in the fuel used outside the SECA areas equal to 3.5% is currently in force, at least until the year 2020 or 2025. The recommended by classification societies overhauls of utilization boilers are, therefore characterized by a specially chosen strategy thanks to which it is possible to maintain their appropriate technical condition. The requirement to use fuels with low sulphur content (LSFO), which are significantly more expensive than MDO fuels, in the areas of controlled sulphur emissions also led to a further introduction of alternative fuels, such as methanol and above all liquefied natural gas (LNG), onto ships. That is especially valid for the ship owners whose vessels e.g. ferries sail mainly within SCECA This article analyses the consequences of the introduced fuel change on utilization boiler maintenance. A change in the technical condition maintenance strategy for utilization boilers has been suggested.

Enhance®Fitness Dissemination and Implementation,: 2010-2015: A Scoping Review.

PubMed

Petrescu-Prahova, Miruna G; Eagen, Thomas J; Fishleder, Sarah L; Belza, Basia

2017-03-01

Physical activity has many benefits for older adult physical and mental health. Enhance ® Fitness (EF) is an evidence-based group exercise program delivered by community-based organizations. The purpose of this study was to review recent evidence on the dissemination and implementation of EF. A scoping review of qualitative and quantitative studies with EF as main focus was conducted. CINAHL, PubMed, PubMed Central, SCOPUS, Web of Science, PsycINFO, and Google Scholar were searched between October and November 2015 for data-based studies on EF published in 2010-2015. Two team members abstracted each paper independently using a data abstraction tool. Results were summarized using the Reach, Effectiveness, Adoption, Implementation, and Maintenance (RE-AIM) framework. Seventeen publications met inclusion criteria. EF has reached and is effective across a broad population base, including individuals with low SES and diverse ethnic/racial backgrounds. EF participation may be associated with reduced risk for falls requiring medical care, and is associated with fewer hospital admissions. Analyses of medical cost savings from EF participation and program implementation costs suggest economic benefits of EF implementation for communities. Organization-level maintenance is facilitated by program-specific and organizational factors, such as instructor training and funding. Individual-level maintenance is facilitated by program structure, absence of pain, and increased quality of life. More-rigorous evidence is needed about the association between participation in EF and conditions such as falls. Evaluation of program fidelity, adaptations, and sustainability is limited; more-systematic examination across population groups and types of organizations would help ensure older adults continue to benefit from EF participation. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Ongoing lead-based paint..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities...

24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Ongoing lead-based paint..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities...

24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Ongoing lead-based paint..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities...

24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Ongoing lead-based paint..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities...

24 CFR 35.1220 - Ongoing lead-based paint maintenance activities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Ongoing lead-based paint..., Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Tenant-Based Rental Assistance § 35.1220 Ongoing lead-based paint maintenance activities...

Improving software maintenance through measurement

NASA Technical Reports Server (NTRS)

Rombach, H. Dieter; Ulery, Bradford T.

1989-01-01

A practical approach to improving software maintenance through measurements is presented. This approach is based on general models for measurement and improvement. Both models, their integration, and practical guidelines for transferring them into industrial maintenance settings are presented. Several examples of applications of the approach to real-world maintenance environments are discussed.

Which factors affect software projects maintenance cost more?

PubMed

Dehaghani, Sayed Mehdi Hejazi; Hajrahimi, Nafiseh

2013-03-01

The software industry has had significant progress in recent years. The entire life of software includes two phases: production and maintenance. Software maintenance cost is increasingly growing and estimates showed that about 90% of software life cost is related to its maintenance phase. Extraction and considering the factors affecting the software maintenance cost help to estimate the cost and reduce it by controlling the factors. In this study, the factors affecting software maintenance cost were determined then were ranked based on their priority and after that effective ways to reduce the maintenance costs were presented. This paper is a research study. 15 software related to health care centers information systems in Isfahan University of Medical Sciences and hospitals function were studied in the years 2010 to 2011. Among Medical software maintenance team members, 40 were selected as sample. After interviews with experts in this field, factors affecting maintenance cost were determined. In order to prioritize the factors derived by AHP, at first, measurement criteria (factors found) were appointed by members of the maintenance team and eventually were prioritized with the help of EC software. Based on the results of this study, 32 factors were obtained which were classified in six groups. "Project" was ranked the most effective feature in maintenance cost with the highest priority. By taking into account some major elements like careful feasibility of IT projects, full documentation and accompany the designers in the maintenance phase good results can be achieved to reduce maintenance costs and increase longevity of the software.

Probabilistic Fatigue Life Updating for Railway Bridges Based on Local Inspection and Repair.

PubMed

Lee, Young-Joo; Kim, Robin E; Suh, Wonho; Park, Kiwon

2017-04-24

Railway bridges are exposed to repeated train loads, which may cause fatigue failure. As critical links in a transportation network, railway bridges are expected to survive for a target period of time, but sometimes they fail earlier than expected. To guarantee the target bridge life, bridge maintenance activities such as local inspection and repair should be undertaken properly. However, this is a challenging task because there are various sources of uncertainty associated with aging bridges, train loads, environmental conditions, and maintenance work. Therefore, to perform optimal risk-based maintenance of railway bridges, it is essential to estimate the probabilistic fatigue life of a railway bridge and update the life information based on the results of local inspections and repair. Recently, a system reliability approach was proposed to evaluate the fatigue failure risk of structural systems and update the prior risk information in various inspection scenarios. However, this approach can handle only a constant-amplitude load and has limitations in considering a cyclic load with varying amplitude levels, which is the major loading pattern generated by train traffic. In addition, it is not feasible to update the prior risk information after bridges are repaired. In this research, the system reliability approach is further developed so that it can handle a varying-amplitude load and update the system-level risk of fatigue failure for railway bridges after inspection and repair. The proposed method is applied to a numerical example of an in-service railway bridge, and the effects of inspection and repair on the probabilistic fatigue life are discussed.

Probabilistic Fatigue Life Updating for Railway Bridges Based on Local Inspection and Repair

PubMed Central

Lee, Young-Joo; Kim, Robin E.; Suh, Wonho; Park, Kiwon

2017-01-01

Railway bridges are exposed to repeated train loads, which may cause fatigue failure. As critical links in a transportation network, railway bridges are expected to survive for a target period of time, but sometimes they fail earlier than expected. To guarantee the target bridge life, bridge maintenance activities such as local inspection and repair should be undertaken properly. However, this is a challenging task because there are various sources of uncertainty associated with aging bridges, train loads, environmental conditions, and maintenance work. Therefore, to perform optimal risk-based maintenance of railway bridges, it is essential to estimate the probabilistic fatigue life of a railway bridge and update the life information based on the results of local inspections and repair. Recently, a system reliability approach was proposed to evaluate the fatigue failure risk of structural systems and update the prior risk information in various inspection scenarios. However, this approach can handle only a constant-amplitude load and has limitations in considering a cyclic load with varying amplitude levels, which is the major loading pattern generated by train traffic. In addition, it is not feasible to update the prior risk information after bridges are repaired. In this research, the system reliability approach is further developed so that it can handle a varying-amplitude load and update the system-level risk of fatigue failure for railway bridges after inspection and repair. The proposed method is applied to a numerical example of an in-service railway bridge, and the effects of inspection and repair on the probabilistic fatigue life are discussed. PMID:28441768

49 CFR 234.311 - ENS sign placement and maintenance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Conditions at Highway-Rail and Pathway Grade Crossings § 234.311 ENS sign placement and maintenance. (a) Number of signs at highway-rail or pathway grade crossing. (1) In general. The maintaining railroad, or the railroad appointed pursuant to § 234.306(b), for a highway-rail or pathway grade crossing shall...

49 CFR 234.311 - ENS sign placement and maintenance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Conditions at Highway-Rail and Pathway Grade Crossings § 234.311 ENS sign placement and maintenance. (a) Number of signs at highway-rail or pathway grade crossing. (1) In general. The maintaining railroad, or the railroad appointed pursuant to § 234.306(b), for a highway-rail or pathway grade crossing shall...

49 CFR 234.311 - ENS sign placement and maintenance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Conditions at Highway-Rail and Pathway Grade Crossings § 234.311 ENS sign placement and maintenance. (a) Number of signs at highway-rail or pathway grade crossing. (1) In general. The maintaining railroad, or the railroad appointed pursuant to § 234.306(b), for a highway-rail or pathway grade crossing shall...

Finishes for Wood Decks

Treesearch

Mark Knaebe

2013-01-01

Wood decks have become an important part of residential construction. Wood decks can add versatile living space to a home and, with minimal maintenance, provide decades of use. However, wood decks are exposed to high levels of stress from severe weather conditions that shrink and swell the wood. Without proper maintenance, wood decks can develop problems such as checks...

40 CFR 86.432-78 - Deterioration factor.

Code of Federal Regulations, 2013 CFR

2013-07-01

... apply the outlier procedure to a data set containing data which were averaged under § 86.427-78(e), the... be developed for each pollutant. The applicable data to be used in calculating these factors are: (1... maintenance, if approval of the maintenance by the Administrator was conditioned on the data being used in the...

40 CFR 86.432-78 - Deterioration factor.

Code of Federal Regulations, 2011 CFR

2011-07-01

... apply the outlier procedure to a data set containing data which were averaged under § 86.427-78(e), the... be developed for each pollutant. The applicable data to be used in calculating these factors are: (1... maintenance, if approval of the maintenance by the Administrator was conditioned on the data being used in the...

40 CFR 86.432-78 - Deterioration factor.

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply the outlier procedure to a data set containing data which were averaged under § 86.427-78(e), the... be developed for each pollutant. The applicable data to be used in calculating these factors are: (1... maintenance, if approval of the maintenance by the Administrator was conditioned on the data being used in the...

40 CFR 86.432-78 - Deterioration factor.

Code of Federal Regulations, 2014 CFR

2014-07-01

... apply the outlier procedure to a data set containing data which were averaged under § 86.427-78(e), the... be developed for each pollutant. The applicable data to be used in calculating these factors are: (1... maintenance, if approval of the maintenance by the Administrator was conditioned on the data being used in the...

40 CFR 86.432-78 - Deterioration factor.

Code of Federal Regulations, 2012 CFR

2012-07-01

... apply the outlier procedure to a data set containing data which were averaged under § 86.427-78(e), the... be developed for each pollutant. The applicable data to be used in calculating these factors are: (1... maintenance, if approval of the maintenance by the Administrator was conditioned on the data being used in the...

Vocational Training and European Standardisation of Qualifications: The Case of Aircraft Maintenance

ERIC Educational Resources Information Center

Haas, Joachim; Ourtau, Maurice

2009-01-01

Initiatives to standardise the conditions for practising certain regulated activities are being taken at European level, particularly in light of the free movement of people and the recognition of qualifications in Member states. This paper looks at the introduction of european licences for aircraft maintenance engineers. It follows an in-depth…

29 CFR 1915.15 - Maintenance of safe conditions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment § 1915.15 Maintenance of safe... into spaces that have been certified “Safe for Workers” or “Safe for Hot Work” shall be disconnected... certificates. A competent person shall visually inspect and test each space certified as “Safe for Workers” or...

29 CFR 1915.15 - Maintenance of safe conditions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment § 1915.15 Maintenance of safe... into spaces that have been certified “Safe for Workers” or “Safe for Hot Work” shall be disconnected... certificates. A competent person shall visually inspect and test each space certified as “Safe for Workers” or...

14 CFR 43.3 - Persons authorized to perform maintenance, preventive maintenance, rebuilding, and alterations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... provisions of paragraph (g) of this section, the Administrator may approve a certificate holder under Part... Administrator; and (3) Perform any inspection required by part 91 or part 125 of this chapter on aircraft it..., and alterations. (k) Updates of databases in installed avionics meeting the conditions of this...

49 CFR 234.219 - Gate arm lights and light cable.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Gate arm lights and light cable. 234.219 Section... Maintenance, Inspection, and Testing Maintenance Standards § 234.219 Gate arm lights and light cable. Each gate arm light shall be maintained in such condition to be properly visible to approaching highway...

49 CFR 234.219 - Gate arm lights and light cable.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Gate arm lights and light cable. 234.219 Section... Maintenance, Inspection, and Testing Maintenance Standards § 234.219 Gate arm lights and light cable. Each gate arm light shall be maintained in such condition to be properly visible to approaching highway...

Brain activation of semantic category-based grouping in multiple identity tracking task

PubMed Central

Wei, Liuqing; Lyu, Chuang; Hu, Siyuan; Li, Zhen

2017-01-01

Using Multiple Identity Tracking task and the functional magnetic resonance imaging (fMRI) technology, the present study aimed to isolate and visualize the functional anatomy of neural systems involved in the semantic category-based grouping process. Three experiment conditions were selected and compared: the category-based targets grouping (TG) condition, the targets-distractors grouping (TDG) condition and the homogenous condition. In the TG condition, observers could utilize the categorical distinction between targets and distractors, to construct a uniform presentation of targets, that is, to form a group of the targets to facilitate tracking. In the TDG condition, half the targets and half the distractors belonged to the same category. Observers had to inhibit the grouping of targets and distractors in one category to complete tracking. In the homogenous condition, where targets and distractors consisted of the same objects, no grouping could be formed. The “TG-Homogenous” contrast (p<0.01) revealed the activation of the left fusiform and the pars triangularis of inferior frontal gyrus (IFG). The “TG-TDG” contrast only revealed the activation of the left anterior cingulate gyrus (ACC). The fusiform and IFG pars triangularis might participate in the representation of semantic knowledge, IFG pars triangularis might relate intensely with the classification of semantic categories. The ACC might be responsible for the initiation and maintenance of grouping representation. PMID:28505166

Fuzzy Based Decision Support System for Condition Assessment and Rating of Bridges

NASA Astrophysics Data System (ADS)

Srinivas, Voggu; Sasmal, Saptarshi; Karusala, Ramanjaneyulu

2016-09-01

In this work, a knowledge based decision support system has been developed to efficiently handle the issues such as distress diagnosis, assessment of damages and condition rating of existing bridges towards developing an exclusive and robust Bridge Management System (BMS) for sustainable bridges. The Knowledge Based Expert System (KBES) diagnoses the distresses and finds the cause of distress in the bridge by processing the data which are heuristic and combined with site inspection results, laboratory test results etc. The coupling of symbolic and numeric type of data has been successfully implemented in the expert system to strengthen its decision making process. Finally, the condition rating of the bridge is carried out using the assessment results obtained from the KBES and the information received from the bridge inspector. A systematic procedure has been developed using fuzzy mathematics for condition rating of bridges by combining the fuzzy weighted average and resolution identity technique. The proposed methodologies and the decision support system will facilitate in developing a robust and exclusive BMS for a network of bridges across the country and allow the bridge engineers and decision makers to carry out maintenance of bridges in a rational and systematic way.

Crew interface specifications development for inflight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Carl, J. G.

1974-01-01

Findings and data products developed during crew specification study for inflight maintenance and stowage functions are reported. From this information base, a family of data concepts to support crew inflight troubleshooting and corrective maintenance activities was developed and specified. Recommendations are made for the improvement of inflight maintenance planning, preparations and operations in future space flight programs through the establishment of an inflight maintenance organization and specific suggestions for techniques to improve the management of the inflight maintenance function.

Is Africa a 'Graveyard' for Linear Accelerators?

PubMed

Reichenvater, H; Matias, L Dos S

2016-12-01

Linear accelerator downtimes are common and problematic in many African countries and may jeopardise the outcome of affected radiation treatments. The predicted increase in cancer incidence and prevalence on the African continent will require, inter alia, improved response with regard to a reduction in linear accelerator downtimes. Here we discuss the problems associated with the maintenance and repair of linear accelerators and propose alternative solutions relevant for local conditions in African countries. The paper is based on about four decades of experience in capacity building, installing, commissioning, calibrating, servicing and repairing linear accelerators in Africa, where about 40% of the low and middle income countries in the world are geographically located. Linear accelerators can successfully be operated, maintained and repaired in African countries provided proper maintenance and repair plans are put in place and executed. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Real-time strategy game training: emergence of a cognitive flexibility trait.

PubMed

Glass, Brian D; Maddox, W Todd; Love, Bradley C

2013-01-01

Training in action video games can increase the speed of perceptual processing. However, it is unknown whether video-game training can lead to broad-based changes in higher-level competencies such as cognitive flexibility, a core and neurally distributed component of cognition. To determine whether video gaming can enhance cognitive flexibility and, if so, why these changes occur, the current study compares two versions of a real-time strategy (RTS) game. Using a meta-analytic Bayes factor approach, we found that the gaming condition that emphasized maintenance and rapid switching between multiple information and action sources led to a large increase in cognitive flexibility as measured by a wide array of non-video gaming tasks. Theoretically, the results suggest that the distributed brain networks supporting cognitive flexibility can be tuned by engrossing video game experience that stresses maintenance and rapid manipulation of multiple information sources. Practically, these results suggest avenues for increasing cognitive function.

Septic tank additive impacts on microbial populations.

PubMed

Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

2008-01-01

Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

Real-Time Strategy Game Training: Emergence of a Cognitive Flexibility Trait

PubMed Central

Glass, Brian D.; Maddox, W. Todd; Love, Bradley C.

2013-01-01

Training in action video games can increase the speed of perceptual processing. However, it is unknown whether video-game training can lead to broad-based changes in higher-level competencies such as cognitive flexibility, a core and neurally distributed component of cognition. To determine whether video gaming can enhance cognitive flexibility and, if so, why these changes occur, the current study compares two versions of a real-time strategy (RTS) game. Using a meta-analytic Bayes factor approach, we found that the gaming condition that emphasized maintenance and rapid switching between multiple information and action sources led to a large increase in cognitive flexibility as measured by a wide array of non-video gaming tasks. Theoretically, the results suggest that the distributed brain networks supporting cognitive flexibility can be tuned by engrossing video game experience that stresses maintenance and rapid manipulation of multiple information sources. Practically, these results suggest avenues for increasing cognitive function. PMID:23950921

Condition-dependence, pleiotropy and the handicap principle of sexual selection in melanin-based colouration.

PubMed

Roulin, Alexandre

2016-05-01

The signalling function of melanin-based colouration is debated. Sexual selection theory states that ornaments should be costly to produce, maintain, wear or display to signal quality honestly to potential mates or competitors. An increasing number of studies supports the hypothesis that the degree of melanism covaries with aspects of body condition (e.g. body mass or immunity), which has contributed to change the initial perception that melanin-based colour ornaments entail no costs. Indeed, the expression of many (but not all) melanin-based colour traits is weakly sensitive to the environment but strongly heritable suggesting that these colour traits are relatively cheap to produce and maintain, thus raising the question of how such colour traits could signal quality honestly. Here I review the production, maintenance and wearing/displaying costs that can generate a correlation between melanin-based colouration and body condition, and consider other evolutionary mechanisms that can also lead to covariation between colour and body condition. Because genes controlling melanic traits can affect numerous phenotypic traits, pleiotropy could also explain a linkage between body condition and colouration. Pleiotropy may result in differently coloured individuals signalling different aspects of quality that are maintained by frequency-dependent selection or local adaptation. Colouration may therefore not signal absolute quality to potential mates or competitors (e.g. dark males may not achieve a higher fitness than pale males); otherwise genetic variation would be rapidly depleted by directional selection. As a consequence, selection on heritable melanin-based colouration may not always be directional, but mate choice may be conditional to environmental conditions (i.e. context-dependent sexual selection). Despite the interest of evolutionary biologists in the adaptive value of melanin-based colouration, its actual role in sexual selection is still poorly understood. © 2015 Cambridge Philosophical Society.

Attention supports verbal short-term memory via competition between dorsal and ventral attention networks.

PubMed

Majerus, Steve; Attout, Lucie; D'Argembeau, Arnaud; Degueldre, Christian; Fias, Wim; Maquet, Pierre; Martinez Perez, Trecy; Stawarczyk, David; Salmon, Eric; Van der Linden, Martial; Phillips, Christophe; Balteau, Evelyne

2012-05-01

Interactions between the neural correlates of short-term memory (STM) and attention have been actively studied in the visual STM domain but much less in the verbal STM domain. Here we show that the same attention mechanisms that have been shown to shape the neural networks of visual STM also shape those of verbal STM. Based on previous research in visual STM, we contrasted the involvement of a dorsal attention network centered on the intraparietal sulcus supporting task-related attention and a ventral attention network centered on the temporoparietal junction supporting stimulus-related attention. We observed that, with increasing STM load, the dorsal attention network was activated while the ventral attention network was deactivated, especially during early maintenance. Importantly, activation in the ventral attention network increased in response to task-irrelevant stimuli briefly presented during the maintenance phase of the STM trials but only during low-load STM conditions, which were associated with the lowest levels of activity in the dorsal attention network during encoding and early maintenance. By demonstrating a trade-off between task-related and stimulus-related attention networks during verbal STM, this study highlights the dynamics of attentional processes involved in verbal STM.

An Automated Road Roughness Detection from Mobile Laser Scanning Data

NASA Astrophysics Data System (ADS)

Kumar, P.; Angelats, E.

2017-05-01

Rough roads influence the safety of the road users as accident rate increases with increasing unevenness of the road surface. Road roughness regions are required to be efficiently detected and located in order to ensure their maintenance. Mobile Laser Scanning (MLS) systems provide a rapid and cost-effective alternative by providing accurate and dense point cloud data along route corridor. In this paper, an automated algorithm is presented for detecting road roughness from MLS data. The presented algorithm is based on interpolating smooth intensity raster surface from LiDAR point cloud data using point thinning process. The interpolated surface is further processed using morphological and multi-level Otsu thresholding operations to identify candidate road roughness regions. The candidate regions are finally filtered based on spatial density and standard deviation of elevation criteria to detect the roughness along the road surface. The test results of road roughness detection algorithm on two road sections are presented. The developed approach can be used to provide comprehensive information to road authorities in order to schedule maintenance and ensure maximum safety conditions for road users.

Phase editing as a signal pre-processing step for automated bearing fault detection

NASA Astrophysics Data System (ADS)

Barbini, L.; Ompusunggu, A. P.; Hillis, A. J.; du Bois, J. L.; Bartic, A.

2017-07-01

Scheduled maintenance and inspection of bearing elements in industrial machinery contributes significantly to the operating costs. Savings can be made through automatic vibration-based damage detection and prognostics, to permit condition-based maintenance. However automation of the detection process is difficult due to the complexity of vibration signals in realistic operating environments. The sensitivity of existing methods to the choice of parameters imposes a requirement for oversight from a skilled operator. This paper presents a novel approach to the removal of unwanted vibrational components from the signal: phase editing. The approach uses a computationally-efficient full-band demodulation and requires very little oversight. Its effectiveness is tested on experimental data sets from three different test-rigs, and comparisons are made with two state-of-the-art processing techniques: spectral kurtosis and cepstral pre- whitening. The results from the phase editing technique show a 10% improvement in damage detection rates compared to the state-of-the-art while simultaneously improving on the degree of automation. This outcome represents a significant contribution in the pursuit of fully automatic fault detection.

Characterization and optimization of spiral eddy current coils for in-situ crack detection

NASA Astrophysics Data System (ADS)

Mandache, Catalin

2018-03-01

In-situ condition-based maintenance is making strides in the aerospace industry and it is seen as an alternative to scheduled, time-based maintenance. With fatigue cracks originating from fastener holes as the main reason for structural failures, embedded eddy current coils are a viable non-invasive solution for their timely detection. The development and potential broad use of these coils are motivated by a few consistent arguments: (i) inspection of structures of complicated geometries and hard to access areas, that often require disassembly, (ii) alternative to regular inspection actions that could introduce inadvertent damage, (iii) for structures that have short inspection intervals, and (iv) for repaired structures where fastener holes contain bushings and prevent further bolt-hole inspections. Since the spiral coils are aiming at detecting radial cracks emanating from the fastener holes, their design parameters should allow for high inductance, low ohmic losses and power requirements, as well as optimal size and high sensitivity to discontinuities. In this study, flexible, surface conformable, spiral eddy current coils are empirically investigated on mock-up specimens, while numerical analysis is performed for their optimization and design improvement.

Kis antitoxin couples plasmid R1 replication and parD (kis,kid) maintenance modules.

PubMed

López-Villarejo, Juan; Diago-Navarro, Elizabeth; Hernández-Arriaga, Ana María; Díaz-Orejas, Ramón

2012-03-01

The coupling between the replication and parD (kis, kid) maintenance modules of R1 has been revisited here by the isolation of a significant collection of conditional replication mutants in the pKN1562 mini-R1 plasmid, and in its derivative, pJLV01, specifically affected in the RNase activity of the Kid toxin. This new analysis aims to identify key factors in this coupling. For this purpose we have quantified and characterized the restriction introduced by parD to isolate conditional replication mutants of this plasmid, a signature of the modular coupling. This restriction depends on the RNase activity of the Kid toxin and it is relieved by either over-expression of the Kis antitoxin or by preventing its degradation by Lon and ClpAP proteases. Based on these data and on the correlation between copy numbers and parD transcriptional levels obtained in the different mutants, it is proposed that a reduction of Kis antitoxin levels in response to inefficient plasmid replication is the key factor for coupling plasmid replication and parD modules. Copyright © 2012 Elsevier Inc. All rights reserved.

46. SOUTHEAST SIDE ELEVATION OF BUILDING 361 (MUNITIONS MAINTENANCE SQUADRON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. SOUTHEAST SIDE ELEVATION OF BUILDING 361 (MUNITIONS MAINTENANCE SQUADRON ADMINISTRATION BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

47. EAST CORNER OF BUILDING 361 (MUNITIONS MAINTENANCE SQUADRON ADMINISTRATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

47. EAST CORNER OF BUILDING 361 (MUNITIONS MAINTENANCE SQUADRON ADMINISTRATION BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

PERFORMANCE-BASED CONTRACTING IN CONSTRUCTION PHASE AND MAINTENANCE PHASE OF PAVEMENT

NASA Astrophysics Data System (ADS)

Yoshida, Takeshi

Performance-based contracting for pavement in Japan started as performance warranties in construction phase, in 1999. Recently, road agencies have recognized the applicability of this type of contracting in outsourcing of maintenance activities. The objectives of this study are to clarify the issues of performance specifying in construction phase and maintenance phase of pavement, and to propose measures to be taken. This paper, with the recognition that the life of each pavement depends on performance standards for various attributes, reviews domestic and foreign examples of performance-based contracting. A performance standard based on the average of current practices can enhance product quality and service life with a warranty contract. Repair thresholds and response time for each deficiency should be considered as performance standards in maintenance phase.

Comparison of Foam-Based and Spring-Loaded Dry EEG Electrodes with Wet Electrodes in Resting and Moving Conditions*

PubMed Central

Yeung, Arnold; Garudadri, Harinath; Van Toen, Carolyn; Mercier, Patrick; Balkan, Ozgur; Makeig, Scott; Virji-Babul, Naznin

2018-01-01

The introduction of dry electrodes for EEG measurements has opened up possibilities of recording EEG outside of standard clinical environments by reducing required preparation and maintenance. However, the signal quality of dry electrodes in comparison with wet electrodes has not yet been evaluated under activities of daily life (ADL) or high motion tasks. In this study, we compared the performances of foam-based and spring-loaded dry electrodes with wet electrodes under three different task conditions: resting state, walking, and cycling. Our analysis showed signals obtained by the 2 types of dry electrodes and obtained by wet electrodes displayed high correlation for all conditions, while being prone to similar environmental and electrode-based artifacts. Overall, our results suggest that dry electrodes have a similar signal quality in comparison to wet electrodes and may be more practical for use in mobile and real-time motion applications due to their convenience. In addition, we conclude that as with wet electrodes, post-processing can mitigate motion artifacts in ambulatory EEG acquisition. PMID:26737936

Medical Equipment Tele- and Condition-Based Maintenance with Enhanced Remote Diagnostic Access (RDA) and Computer Vision

DTIC Science & Technology

2010-04-01

failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE APR 2010 2. REPORT...The second is a ‘mechanical’ part that is controlled by circuit boards and is accessible by the technician via the serial console and running...was the use of conventional remote access solution designed for telecommuters or teleworkers in the Information Technology (IT) world, such as a

Condition-Based Maintenance (CBM): A Working Partnership between Government, Industry, and Academia

DTIC Science & Technology

2006-06-01

Listing [UH-611 COMPONENT NSN PART NUMNBER FEDLOG NOM \\ENCL.ATURE NOMNENC(LATLURE Oil Cooler Fan Bearing 3110-01-329-8573 1 IOKSZZ-401 BEARING,BALL,ANNULAR...Main Rotor Blade 1615-01-106-1903 70150-09100- 043 BLADE,MAIN ROTOR Pump Module Assembly 4320-01-207-7228 70652-02300-050 MODULE ASSY,PUMP Damper...Drive Shaft 2835-01-123-7648 70361-08004- 043 DRIVE SHAFT ASSEMBLYROTARY WING Intermediate Gear Box 1615-01-074-5152 70357-06300-042 GEAR BOX ASSEMBLY 39

Workshop on Condition Based Maintenance Held in Atlantic Beach, North Carolina on November 15 - 17, 1993

DTIC Science & Technology

1993-11-17

pounds of Torque Over Three Minutes Continuous Operation IYMCO1A 14 DMAE Corporation C-130 Engine Gearbox January 19925 Stress Wave Analysis - I in’. I...FaUi.O The CBM needs associated with surface initiated failure mechanisms can be divided into I singular defects and low (h/a) operation. Singular defec-t...These include nicks, scratches, corrosion pits and dents caused by third’ body particles (hard or soft). These defects cause local stress risers

Development of GUI Type On-Line Condition Monitoring Program for a Turboprop Engine Using Labview

NASA Astrophysics Data System (ADS)

Kong, Changduk; Kim, Keonwoo

2011-12-01

Recently, an aero gas turbine health monitoring system has been developed for precaution and maintenance action against faults or performance degradations of the advanced propulsion system which occurs in severe environments such as high altitude, foreign object damage particles, hot and heavy rain and snowy atmospheric conditions. However to establish this health monitoring system, the online condition monitoring program is firstly required, and the program must monitor the engine performance trend through comparison between measured engine performance data and base performance results calculated by base engine performance model. This work aims to develop a GUI type on-line condition monitoring program for the PT6A-67 turboprop engine of a high altitude and long endurance operation UAV using LabVIEW. The base engine performance of the on-line condition monitoring program is simulated using component maps inversely generated from the limited performance deck data provided by engine manufacturer. The base engine performance simulation program is evaluated because analysis results by this program agree well with the performance deck data. The proposed on-line condition program can monitor the real engine performance as well as the trend through precise comparison between clean engine performance results calculated by the base performance simulation program and measured engine performance signals. In the development phase of this monitoring system, a signal generation module is proposed to evaluate the proposed online monitoring system. For user friendly purpose, all monitoring program are coded by LabVIEW, and monitoring examples are demonstrated using the proposed GUI type on-condition monitoring program.

Developing Mobile- and BIM-Based Integrated Visual Facility Maintenance Management System

PubMed Central

Su, Yu-Chih

2013-01-01

Facility maintenance management (FMM) has become an important topic for research on the operation phase of the construction life cycle. Managing FMM effectively is extremely difficult owing to various factors and environments. One of the difficulties is the performance of 2D graphics when depicting maintenance service. Building information modeling (BIM) uses precise geometry and relevant data to support the maintenance service of facilities depicted in 3D object-oriented CAD. This paper proposes a new and practical methodology with application to FMM using BIM technology. Using BIM technology, this study proposes a BIM-based facility maintenance management (BIMFMM) system for maintenance staff in the operation and maintenance phase. The BIMFMM system is then applied in selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FMM practice. Using the BIMFMM system, maintenance staff can access and review 3D BIM models for updating related maintenance records in a digital format. Moreover, this study presents a generic system architecture and its implementation. The combined results demonstrate that a BIMFMM-like system can be an effective visual FMM tool. PMID:24227995

The effect of high-dose dronabinol (oral THC) maintenance on cannabis self-administration.

PubMed

Schlienz, Nicolas J; Lee, Dustin C; Stitzer, Maxine L; Vandrey, Ryan

2018-06-01

There is a clear need for advancing the treatment of cannabis use disorders. Prior research has demonstrated that dronabinol (oral THC) can dose-dependently suppress cannabis withdrawal and reduce the acute effects of smoked cannabis. The present study was conducted to evaluate whether high-dose dronabinol could reduce cannabis self-administration among daily users. Non-treatment seeking daily cannabis users (N = 13) completed a residential within-subjects crossover study and were administered placebo, low-dose dronabinol (120 mg/day; 40 mg tid), or high-dose dronabinol (180-240 mg/day; 60-80 mg tid) for 12 consecutive days (order counterbalanced). During each 12-day dronabinol maintenance phase, participants were allowed to self-administer smoked cannabis containing <1% THC (placebo) or 5.7% THC (active) under forced-choice (drug vs. money) or progressive ratio conditions. Participants self-administered significantly more active cannabis compared with placebo in all conditions. When active cannabis was available, self-administration was significantly reduced during periods of dronabinol maintenance compared with placebo maintenance. There was no difference in self-administration between the low- and high-dose dronabinol conditions. Chronic dronabinol dosing can reduce cannabis self-administration in daily cannabis users and suppress withdrawal symptoms. Cannabinoid agonist medications should continue to be explored for therapeutic utility in the treatment of cannabis use disorders. Copyright © 2018 Elsevier B.V. All rights reserved.

Licencing and Training Reform in the Australian Aircraft Maintenance Industry

ERIC Educational Resources Information Center

Hampson, Ian; Fraser, Doug

2016-01-01

The training and licencing of aircraft maintenance engineers fulfils a crucial protective function since it is they who perform and supervise aircraft maintenance and certify that planes are safe afterwards. In Australia, prior to training reform, a trades-based system of aircraft maintenance engineer training existed in an orderly relation with…

Using PHM to measure equipment usable life on the Air Force's next generation reusable space booster

NASA Astrophysics Data System (ADS)

Blasdel, A.

The U.S. Air Force procures many launch vehicles and launch vehicle services to place their satellites at their desired location in space. The equipment on-board these satellite and launch vehicle often suffer from premature failures that result in the total loss of the satellite or a shortened mission life sometimes requiring the purchase of a replacement satellite and launch vehicle. The Air Force uses its EELV to launch its high priority satellites. Due to a rise in the cost of purchasing a launch using the Air Force's EELV from 72M in 1997 to as high as 475M per launch today, the Air Force is working to replace the EELV with a reusable space booster (RSB). The RSB will be similar in design and operations to the recently cancelled NASA reusable space booster known as the Space Shuttle. If the Air Force uses the same process that procures the EELV and other launch vehicles and satellites, the RSB will also suffer from premature equipment failures thus putting the payloads at a similar high risk of mission failure. The RSB is expected to lower each launch cost by 50% compared to the EELV. The development of the RSB offers the Air Force an opportunity to use a new reliability paradigm that includes a prognostic and health management program and a condition-based maintenance program. These both require using intelligent, decision making self-prognostic equipment The prognostic and health management program and its condition-based maintenance program allows increases in RSB equipment usable life, lower logistics and maintenance costs, while increasing safety and mission assurance. The PHM removes many decisions from personnel that, in the past resulted in catastrophic failures and loss of life. Adding intelligent, decision-making self-prognostic equipment to the RSB will further decrease launch costs while decreasing risk and increasing safety and mission assurance.

International water and steam quality standards on thermal power plants at all-volatile treatment

NASA Astrophysics Data System (ADS)

Petrova, T. I.; Orlov, K. A.; Dooley, R. B.

2016-12-01

One of the methods for the improvement of reliability and efficiency of the equipment at heat power plants is the decrease in the rate of corrosion of structural materials and sedimentation in water/steam circuit. These processes can be reduced to minimum by using the water with low impurity content and coolant treatment. For many years, water and steam quality standards were developed in various countries (United States, Germany, Japan, etc.) for specific types of equipment. The International Association for the Properties of Water and Steam (IAPWS), which brings together specialists from 21 countries, developed the water and steam quality standards for various types of power equipment based on theoretical studies and long-term operating experience of power equipment. Recently, various water-chemistry conditions are applied on heatpower equipment including conventional boilers and HRSGs with combined cycle power plants (Combined Cycle Power Plants (CCPP)). In paper, the maintenance conditions of water chemistry with ammonia or volatile amine dosing are described: reducing AVT(R), oxidizing AVT(O), and oxygen OT. Each of them is provided by the water and steam quality standards and recommendations are given on their maintenance under various operation conditions. It is noted that the quality control of heat carrier must be carried out with a particular care on the HPPs with combined cycle gas turbine units, where frequent starts and halts are performed.

Continuous and batch cultures of Escherichia coli KJ134 for succinic acid fermentation: metabolic flux distributions and production characteristics.

PubMed

van Heerden, Carel D; Nicol, Willie

2013-09-17

Succinic acid (SA) has become a prominent biobased platform chemical with global production quantities increasing annually. Numerous genetically modified E. coli strains have been developed with the main aim of increasing the SA yield of the organic carbon source. In this study, a promising SA-producing strain, E. coli KJ134 [Biotechnol. Bioeng. 101:881-893, 2008], from the Department of Microbiology and Cell Science of the University of Florida was evaluated under continuous and batch conditions using D-glucose and CO2 in a mineral salt medium. Production characteristics entailing growth and maintenance rates, growth termination points and metabolic flux distributions under growth and non-growth conditions were determined. The culture remained stable for weeks under continuous conditions. Under growth conditions the redox requirements of the reductive tricarboxylic acid (TCA) cycle was solely balanced by acetic acid (AcA) production via the pyruvate dehydrogenase route resulting in a molar ratio of SA:AcA of two. A maximum growth rate of 0.22 h(-1) was obtained, while complete growth inhibition occurred at a SA concentration of 18 g L(-1). Batch culture revealed that high-yield succinate production (via oxidative TCA or glyoxylate redox balancing) occurred under non-growth conditions where a SA:AcA molar ratio of up to five was attained, with a final SA yield of 0.94 g g(-1). Growth termination of the batch culture was in agreement with that of the continuous culture. The maximum maintenance production rate of SA under batch conditions was found to be 0.6 g g(-1) h(-1). This is twice the maintenance rate observed in the continuous runs. The study revealed that the metabolic flux of E. coli KJ134 differs significantly for growth and non-growth conditions, with non-growth conditions resulting in higher SA:AcA ratios and SA yields. Bioreaction characteristics entailing growth and maintenance rates, as well as growth termination markers will guide future fermentor designs and improvements.

Framework and implementation of a continuous network-wide health monitoring system for roadways

NASA Astrophysics Data System (ADS)

Wang, Ming; Birken, Ralf; Shahini Shamsabadi, Salar

2014-03-01

According to the 2013 ASCE report card America's infrastructure scores only a D+. There are more than four million miles of roads (grade D) in the U.S. requiring a broad range of maintenance activities. The nation faces a monumental problem of infrastructure management in the scheduling and implementation of maintenance and repair operations, and in the prioritization of expenditures within budgetary constraints. The efficient and effective performance of these operations however is crucial to ensuring roadway safety, preventing catastrophic failures, and promoting economic growth. There is a critical need for technology that can cost-effectively monitor the condition of a network-wide road system and provide accurate, up-to-date information for maintenance activity prioritization. The Versatile Onboard Traffic Embedded Roaming Sensors (VOTERS) project provides a framework and the sensing capability to complement periodical localized inspections to continuous network-wide health monitoring. Research focused on the development of a cost-effective, lightweight package of multi-modal sensor systems compatible with this framework. An innovative software infrastructure is created that collects, processes, and evaluates these large time-lapse multi-modal data streams. A GIS-based control center manages multiple inspection vehicles and the data for further analysis, visualization, and decision making. VOTERS' technology can monitor road conditions at both the surface and sub-surface levels while the vehicle is navigating through daily traffic going about its normal business, thereby allowing for network-wide frequent assessment of roadways. This deterioration process monitoring at unprecedented time and spatial scales provides unique experimental data that can be used to improve life-cycle cost analysis models.

Steroid Avoidance in Pediatric Heart Transplantation Results in Excellent Graft Survival

PubMed Central

Auerbach, Scott R.; Gralla, Jane; Campbell, David N.; Miyamoto, Shelley D.; Pietra, Biagio A.

2018-01-01

Background Maintenance steroid (MS) use in pediatric heart transplantation (HT) varies across centers. The purpose of this study was to evaluate the impact of steroid-free maintenance immunosuppression (SF) on graft outcomes in pediatric HT. Methods Patients younger than 18 years in the United States undergoing a first HT during 1990 to 2010 were analyzed for conditional 30-day graft loss (death or repeat HT) and death based on MS use by multivariable analysis. A propensity score was then given to each patient using a logistic model, and propensity matching was performed using pre-HT risk factors, induction therapy, and nonsteroid maintenance immunosuppression. Kaplan-Meier graft and patient survival probabilities by MS use were then calculated. Results Of 4894 patients, 3962 (81%) were taking MS and 932 (19%) SF. Of the 4530 alive at 30 days after HT, 3694 (82%) and 836 (18%) were in the MS and SF groups, respectively. Unmatched multivariable analysis showed no difference in 30-day conditional graft survival between MS and SF groups (hazard ratio=1.08, 95% confidence interval=0.93-1.24; P=0.33). Propensity matching resulted in 462 patients in each MS and SF group. Propensity-matched Kaplan-Meier survival analysis showed no difference in graft or patient survival between groups (P=0.3 and P=0.16, respectively). Conclusions We found no difference in graft survival between SF patients and those taking MS. An SF regimen in pediatric HT avoids potential complications of steroid use without compromising graft survival, even after accounting for pre-HT risk factors. PMID:24389908

Examining the maintenance and generalization effects of repeated practice: A comparison of three interventions.

PubMed

Ardoin, Scott P; Binder, Katherine S; Zawoyski, Andrea M; Foster, Tori E

2018-06-01

Repeated reading (RR) procedures are consistent with the procedures recommended by Haring and Eaton's (1978) Instructional Hierarchy (IH) for promoting students' fluent responding to newly learned stimuli. It is therefore not surprising that an extensive body of literature exists, which supports RR as an effective practice for promoting students' reading fluency of practiced passages. Less clear, however, is the extent to which RR helps students read the words practiced in an intervention passage when those same words are presented in a new passage. The current study employed randomized control design procedures to examine the maintenance and generalization effects of three interventions that were designed based upon Haring and Eaton's (1978) IH. Across four days, students either practiced reading (a) the same passage seven times (RR+RR), (b) one passage four times and three passages each once (RR+Guided Wide Reading [GWR]), or (c) seven passages each once (GWR+GWR). Students participated in the study across 2weeks, with intervention being provided on a different passage set each week. All passages practiced within a week, regardless of condition, contained four target low frequency and four high frequency words. Across the 130 students for whom data were analyzed, results indicated that increased opportunities to practice words led to greater maintenance effects when passages were read seven days later but revealed minimal differences across conditions in students' reading of target words presented within a generalization passage. Copyright © 2018 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Effects of computer-based training on procedural modifications to standard functional analyses.

PubMed

Schnell, Lauren K; Sidener, Tina M; DeBar, Ruth M; Vladescu, Jason C; Kahng, SungWoo

2018-01-01

Few studies have evaluated methods for training decision-making when functional analysis data are undifferentiated. The current study evaluated computer-based training to teach 20 graduate students to arrange functional analysis conditions, analyze functional analysis data, and implement procedural modifications. Participants were exposed to training materials using interactive software during a 1-day session. Following the training, mean scores on the posttest, novel cases probe, and maintenance probe increased for all participants. These results replicate previous findings during a 1-day session and include a measure of participant acceptability of the training. Recommendations for future research on computer-based training and functional analysis are discussed. © 2017 Society for the Experimental Analysis of Behavior.

Analysis of Maintenance Service Contracts for Dump Trucks Used in Mining Industry with Simulation Approach

NASA Astrophysics Data System (ADS)

Dymasius, A.; Wangsaputra, R.; Iskandar, B. P.

2016-02-01

A mining company needs high availability of dump trucks used to haul mining materials. As a result, an effective maintenance action is required to keep the dump trucks in a good condition and hence reducing failure and downtime of the dump trucks. To carry out maintenance in-house requires a high intensive maintenance facility and high skilled maintenance specialists. Often, outsourcing maintenance is an economic option for the company. An external agent takes a proactive action with offering some maintenance contract options to the owner. The decision problem for the owner is to decide the best option and for the agent is to determine the optimal price for each option offered. A non-cooperative game-theory is used to formulate the decision problems for the owner and the agent. We consider that failure pattern of each truck follows a non-homogeneous Poisson process (NHPP) and a queueing theory with multiple servers is used to estimate the downtime. As it involves high complexity to model downtime using a queueing theory, then in this paper we use a simulation method. Furthermore, we conduct experiment to seek for the best number of maintenance facilities (servers) which minimises maintenance and penalty costs incurred to the agent.

Comparisons of Traffic Collisions between Expressways and Rural Roads in Truck Drivers.

PubMed

Lee, Sangbok; Jeong, Byung Yong

2016-03-01

Truck driving is known as one of the occupations with the highest accident rate. This study investigates the characteristics of traffic collisions according to road types (expressway and rural road). Classifying 267 accidents into expressway and rural road, we analyzed them based on driver characteristics (age, working experience, size of employment), time characteristics (day of accident, time, weather), and accident characteristics (accident causes, accident locations, accident types, driving conditions). When we compared the accidents by road conditions, no differences were found between the driver characteristics. However, from the accident characteristics, the injured person distributions were different by the road conditions. In particular, driving while drowsy is shown to be highly related with the accident characteristics. This study can be used as a guideline and a base line to develop a plan of action to prevent traffic accidents. It can also help to prepare formal regulations about a truck driver's vehicle maintenance and driving attitude for a precaution on road accidents.