40 CFR 63.7515 - When must I conduct subsequent performance tests, fuel analyses, or tune-ups?

Code of Federal Regulations, 2012 CFR

2012-07-01

... performance tests, fuel analyses, or tune-ups? 63.7515 Section 63.7515 Protection of Environment ENVIRONMENTAL... Compliance Requirements § 63.7515 When must I conduct subsequent performance tests, fuel analyses, or tune... and the associated initial fuel analyses within 90 days after the completion of the performance tests...

40 CFR 60.47c - Emission monitoring for particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... that elects not to install a COMS shall conduct a performance test using Method 9 of appendix A-4 of... operator shall conduct subsequent Method 9 of appendix A-4 of this part performance tests using the... performance test results. (i) If no visible emissions are observed, a subsequent Method 9 of appendix A-4 of...

40 CFR 63.10006 - When must I conduct subsequent performance tests or tune-ups?

Code of Federal Regulations, 2014 CFR

2014-07-01

... limit, you must conduct all applicable periodic HCl emissions tests according to Table 5 to this subpart... performance tests according to Table 5 to this subpart and § 63.10007 at least every year. (b) For affected... years (once every year for Hg) according to Table 5 and § 63.10007. Should subsequent emissions testing...

40 CFR 63.10006 - When must I conduct subsequent performance tests or tune-ups?

Code of Federal Regulations, 2013 CFR

2013-07-01

... limit, you must conduct all applicable periodic HCl emissions tests according to Table 5 to this subpart... performance tests according to Table 5 to this subpart and § 63.10007 at least every year. (b) For affected... years (once every year for Hg) according to Table 5 and § 63.10007. Should subsequent emissions testing...

40 CFR 63.7515 - When must I conduct subsequent performance tests, fuel analyses, or tune-ups?

Code of Federal Regulations, 2014 CFR

2014-07-01

... performance tests, fuel analyses, or tune-ups? 63.7515 Section 63.7515 Protection of Environment ENVIRONMENTAL..., fuel analyses, or tune-ups? (a) You must conduct all applicable performance tests according to § 63... performance tests and the associated fuel analyses within 60 days after the completion of the performance...

40 CFR 63.7515 - When must I conduct subsequent performance tests, fuel analyses, or tune-ups?

Code of Federal Regulations, 2013 CFR

2013-07-01

... performance tests, fuel analyses, or tune-ups? 63.7515 Section 63.7515 Protection of Environment ENVIRONMENTAL..., fuel analyses, or tune-ups? (a) You must conduct all applicable performance tests according to § 63... performance tests and the associated fuel analyses within 60 days after the completion of the performance...

40 CFR 63.10006 - When must I conduct subsequent performance tests or tune-ups?

Code of Federal Regulations, 2012 CFR

2012-07-01

... applicable periodic HCl emissions tests according to Table 5 to this subpart and § 63.10007 at least... performance tests according to Table 5 to this subpart and § 63.10007 at least every year. (b) For affected... years (once every year for Hg) according to Table 5 and § 63.10007. Should subsequent emissions testing...

40 CFR 63.2162 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2011 CFR

2011-07-01

... monitoring brew ethanol concentration and calculating VOC concentration in the fermenter exhaust according to..., performance test and establish a brew-to-exhaust correlation according to the procedures in Table 2 to this...

40 CFR 63.2162 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2010 CFR

2010-07-01

... monitoring brew ethanol concentration and calculating VOC concentration in the fermenter exhaust according to..., performance test and establish a brew-to-exhaust correlation according to the procedures in Table 2 to this...

Academic Performance of Subsequent Schools and Impacts of Early Interventions: Evidence from a Randomized Controlled Trial in Head Start Settings

PubMed Central

Zhai, Fuhua; Raver, C. Cybele; Jones, Stephanie M.

2012-01-01

The role of subsequent school contexts in the long-term effects of early childhood interventions has received increasing attention, but has been understudied in the literature. Using data from the Chicago School Readiness Project (CSRP), a cluster-randomized controlled trial conducted in Head Start programs, we investigate whether the intervention had differential effects on academic and behavioral outcomes in kindergarten if children attended high- or low-performing schools subsequent to the preschool intervention year. To address the issue of selection bias, we adopt an innovative method, principal score matching, and control for a set of child, mother, and classroom covariates. We find that exposure to the CSRP intervention in the Head Start year had significant effects on academic and behavioral outcomes in kindergarten for children who subsequently attended high-performing schools, but no significant effects on children attending low-performing schools. Policy implications of the findings are discussed. PMID:22773872

When Is Ignorance Bliss? The Effects of Inaccurate Self-Assessments of Knowledge on Learning and Attrition

ERIC Educational Resources Information Center

Sitzmann, Traci; Johnson, Stefanie K.

2012-01-01

Two studies were conducted to examine the implications of inaccurate self-appraisals in online training. Self-assessment of knowledge moderated the effects of trainees' performance on subsequent performance and attrition. Performance was highest after uniformly positive ratings (i.e., high self-assessment and high performance), followed by…

The Effect of Interpolating Success Experiences into Classes for the Retarded. Final Report.

ERIC Educational Resources Information Center

Eaglstein, Solomon A.

The study was conducted to determine the effects of experimentally-arranged success and failure experiences on the subsequent performance of learning tasks by educable mentally retarded (EMR) students. Subjects were 68 EMR intermediate grade children, divided into four groups. Prior to the learning task on each of 5 subsequent days, subjects in…

The Counselor and the Law. Fourth Edition.

ERIC Educational Resources Information Center

Anderson, Barbara S.

In today's litigious society, the conduct of counseling professionals is increasingly scrutinized by the media, the general public, and the profession itself. Subsequently, counselors need to understand the permissible bounds of conduct within which they can perform their jobs effectively and legally. This text examines these parameters by…

Factors Associated With Surgery Clerkship Performance and Subsequent USMLE Step Scores.

PubMed

Dong, Ting; Copeland, Annesley; Gangidine, Matthew; Schreiber-Gregory, Deanna; Ritter, E Matthew; Durning, Steven J

2018-03-12

We conducted an in-depth empirical investigation to achieve a better understanding of the surgery clerkship from multiple perspectives, including the influence of clerkship sequence on performance, the relationship between self-logged work hours and performance, as well as the association between surgery clerkship performance with subsequent USMLE Step exams' scores. The study cohort consisted of medical students graduating between 2015 and 2018 (n = 687). The primary measures of interest were clerkship sequence (internal medicine clerkship before or after surgery clerkship), self-logged work hours during surgery clerkship, surgery NBME subject exam score, surgery clerkship overall grade, and Step 1, Step 2 CK, and Step 3 exam scores. We reported the descriptive statistics and conducted correlation analysis, stepwise linear regression analysis, and variable selection analysis of logistic regression to answer the research questions. Students who completed internal medicine clerkship prior to surgery clerkship had better performance on surgery subject exam. The subject exam score explained an additional 28% of the variance of the Step 2 CK score, and the clerkship overall score accounted for an additional 24% of the variance after the MCAT scores and undergraduate GPA were controlled. Our finding suggests that the clerkship sequence does matter when it comes to performance on the surgery NBME subject exam. Performance on the surgery subject exam is predictive of subsequent performance on future USMLE Step exams. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

40 CFR 63.7111 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Lime Manufacturing Plants...

40 CFR 63.7111 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Lime Manufacturing Plants...

40 CFR 63.7111 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Lime Manufacturing Plants...

40 CFR 63.7111 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Lime Manufacturing Plants...

40 CFR 60.47c - Emission monitoring for particulate matter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... not to use a COMS shall conduct a performance test using Method 9 of appendix A-4 of this part and the... section. The observation period for Method 9 of appendix A-4 of this part performance tests may be reduced... subsequent Method 9 of appendix A-4 of this part performance tests using the procedures in paragraph (a) of...

40 CFR 60.47c - Emission monitoring for particulate matter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... not to use a COMS shall conduct a performance test using Method 9 of appendix A-4 of this part and the... section. The observation period for Method 9 of appendix A-4 of this part performance tests may be reduced... subsequent Method 9 of appendix A-4 of this part performance tests using the procedures in paragraph (a) of...

40 CFR 60.47c - Emission monitoring for particulate matter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... not to use a COMS shall conduct a performance test using Method 9 of appendix A-4 of this part and the... section. The observation period for Method 9 of appendix A-4 of this part performance tests may be reduced... subsequent Method 9 of appendix A-4 of this part performance tests using the procedures in paragraph (a) of...

Does Written Emotional Disclosure about Stress Improve College Students' Academic Performance? Results from Three Randomized, Controlled Studies

ERIC Educational Resources Information Center

Radcliffe, Alison M.; Stevenson, Jennifer K.; Lumley, Mark A.; D'Souza, Pamela J.; Kraft, Christina A.

2011-01-01

Several early studies and subsequent reviews suggested that written emotional disclosure (WED)--writing repeatedly about personal stressful experiences--leads to improved academic performance of college students. A critical review of available studies casts some doubt on this conclusion, so we conducted three randomized, controlled experiments of…

Effect of late gestation bodyweight change and condition score on progeny feedlot performance

USDA-ARS?s Scientific Manuscript database

Inadequate nutrient intake during late gestation can cause cow BW loss and influence cow reproductive performance and subsequent productivity of steer progeny. Therefore, a 7-yr study with a 3 × 3 arrangement of treatments was conducted at Corona Range and Livestock Research Center, Corona, NM to e...

CHANGES IN FLIGHT TRAINEE PERFORMANCE FOLLOWING SYNTHETIC HELICOPTER FLIGHT TRAINING.

ERIC Educational Resources Information Center

CARO, PAUL W., JR.; ISLEY, ROBERT N.

A STUDY WAS CONDUCTED AT THE U.S. ARMY PRIMARY HELICOPTER SCHOOL, FORT WOLTERS, TEXAS, TO DETERMINE WHETHER THE USE OF A HELICOPTER TRAINING DEVICE WOULD IMPROVE STUDENT PERFORMANCE DURING SUBSEQUENT HELICOPTER CONTACT FLIGHT TRAINING. SUBJECTS WERE TWO EXPERIMENTAL GROUPS AND TWO CONTROL GROUPS OF WARRANT OFFICER CANDIDATES ENROLLED FOR A…

40 CFR 60.46b - Compliance and performance test methods and procedures for particulate matter and nitrogen oxides.

Code of Federal Regulations, 2012 CFR

2012-07-01

....8, and shall conduct subsequent performance tests as requested by the Administrator, using the... Administrator when necessitated by process variables or other factors. (4) For Method 5 of appendix A of this... to the Administrator's satisfaction suitable methods to determine the average hourly heat input rate...

A high-performance, flexible and robust metal nanotrough-embedded transparent conducting film for wearable touch screen panels

NASA Astrophysics Data System (ADS)

Im, Hyeon-Gyun; An, Byeong Wan; Jin, Jungho; Jang, Junho; Park, Young-Geun; Park, Jang-Ung; Bae, Byeong-Soo

2016-02-01

We report a high-performance, flexible and robust metal nanotrough-embedded transparent conducting hybrid film (metal nanotrough-GFRHybrimer). Using an electro-spun polymer nanofiber web as a template and vacuum-deposited gold as a conductor, a junction resistance-free continuous metal nanotrough network is formed. Subsequently, the metal nanotrough is embedded on the surface of a glass-fabric reinforced composite substrate (GFRHybrimer). The monolithic composite structure of our transparent conducting film allows simultaneously high thermal stability (24 h at 250 °C in air), a smooth surface topography (Rrms < 1 nm) and excellent opto-electrical properties. A flexible touch screen panel (TSP) is fabricated using the transparent conducting films. The flexible TSP device stably operates on the back of a human hand and on a wristband.We report a high-performance, flexible and robust metal nanotrough-embedded transparent conducting hybrid film (metal nanotrough-GFRHybrimer). Using an electro-spun polymer nanofiber web as a template and vacuum-deposited gold as a conductor, a junction resistance-free continuous metal nanotrough network is formed. Subsequently, the metal nanotrough is embedded on the surface of a glass-fabric reinforced composite substrate (GFRHybrimer). The monolithic composite structure of our transparent conducting film allows simultaneously high thermal stability (24 h at 250 °C in air), a smooth surface topography (Rrms < 1 nm) and excellent opto-electrical properties. A flexible touch screen panel (TSP) is fabricated using the transparent conducting films. The flexible TSP device stably operates on the back of a human hand and on a wristband. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr07657a

Pyrovalve Blowby Tests

NASA Technical Reports Server (NTRS)

Saulsberry, Regor; Keddy, Christopher P.; Julien, Howard L.

2003-01-01

The NASA White Sands Test Facility (WSTF) was requested to perform pyrovalve blowby tests in support of the Mars Observer Propulsion and Corrective Actions Test Program. Fifty-three tests were conducted in an attempt to characterize the blowby of commercial pyrovalves. Those pyrovalves used on NASA spacecraft are well represented, and the test data reported provide a basis for evaluating the performance of similar valves in other propulsion systems. The three test series conducted are subsequently described. All testing was done in the same test facility, with periodic changes that enhanced the test methodology.

Sleep Interventions Designed to Improve Athletic Performance and Recovery: A Systematic Review of Current Approaches.

PubMed

Bonnar, Daniel; Bartel, Kate; Kakoschke, Naomi; Lang, Christin

2018-03-01

Athletes experience various situations and conditions that can interfere with their sleep, which is crucial for optimal psychological and physiological recovery as well as subsequent performance. Conventional sleep screening and intervention approaches may not be efficacious for athletes given their lifestyle, the demands of training and travel associated with interstate/international competition. The present systematic review aimed to summarize and evaluate sleep intervention studies targeting subsequent performance and recovery in competitive athletes. Based on the findings, a secondary aim was to outline a possible sleep intervention for athletes, including recommendations for content, mode of delivery and evaluation. A systematic review was conducted based on the PRISMA guidelines in May 2016 with an update completed in September 2017. Ten studies met our inclusion criteria comprising a total of 218 participants in the age range of 18-24 years with athletes from various sports (e.g., swimming, soccer, basketball, tennis). A modified version of the quality assessment scale developed by Abernethy and Bleakley was used to evaluate the quality of the studies. The included studies implemented several sleep interventions, including sleep extension and napping, sleep hygiene, and post-exercise recovery strategies. Evidence suggests that sleep extension had the most beneficial effects on subsequent performance. Consistent with previous research, these results suggest that sleep plays an important role in some, but not all, aspects of athletes' performance and recovery. Future researchers should aim to conduct sleep interventions among different athlete populations, compare results, and further establish guidelines and intervention tools for athletes to address their specific sleep demands and disturbances.

Analysis of performance and stress caused by a simulation of a mass casualty incident.

PubMed

Nieto Fernández-Pacheco, Antonio; Castro Delgado, Rafael; Arcos González, Pedro; Navarro Fernández, José Luis; Cerón Madrigal, José Joaquín; Juguera Rodriguez, Laura; Perez Alonso, Nuria; Armero-Barranco, David; Lidon López Iborra, María; Damian, Escribano Tortosa; Pardo Rios, Manuel

2018-03-01

To determine the stress that is potentially produced in professional health workers due to a mass casualty incident (MCI) simulated exercise, and its relation to prior academic training and the role played in the simulation. Observational study of stress in a MCI. For this work, two MCI drills comprised of 40 victims each were conducted. Two randomized groups of 36 students each were created: Master's Students Group (MSG) and Undergraduate Student Group (USG). The role performed by each student (triage or sectorization) was assessed. The stress level was determined by prior and subsequent measurements of alpha-amylase (αA), HR, SBP and DBP. The percentage of victims that were correctly triaged was 88.6%, 91.84% for MSG and 83.76% for the USG (p=0.004). The basal αA was 97,107.50±72,182.67IU/L and the subsequent αA was 136,195.55±90,176.46±IU/L (p<0.001). The baseline HR was 78.74±14.92beats/min and the subsequent HR was 95.65±23.59beats/min (p=0.000). We found significant differences in the αA between students who performed the triage and those who performed sectorization but there were no differences between undergraduate and Masters' students. Conducting a simulated exercise caused stress in personnel involved in the MCI, with a greater impact on participants who performed triage, although it was not influenced by their prior academic level. The stress level in our case did not affect or determine the performance of acquired skills. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Standardisation of nursing care amongst patients in prison].

PubMed

Martínez-Delgado, M M

2014-01-01

To develop the Standardized Nursing Care Process format amongst patients in a prison. Observational, descriptive study, conducted on a sample of thirty patients in Soria Prison between March and June 2011. We collected information via a review of medical records and conducted an interview of nursing assessments using functional patterns. Subsequent nursing diagnoses and interrelated problems were obtained using NANDA taxonomy. The subsequent use of NIC and NOC taxonomy marked the activities and performance criteria for each diagnosis, in the same way as for interrelated problems. The nursing diagnoses found in the patient sample analyzed, and the frequency thereof, reveal peculiarities in terms of the health care needs of the prison population, which makes it possible to standardize nursing care plans for the population under study.

Evaluation of the Use of a Virtual Patient on Student Competence and Confidence in Performing Simulated Clinic Visits.

PubMed

Taglieri, Catherine A; Crosby, Steven J; Zimmerman, Kristin; Schneider, Tulip; Patel, Dhiren K

2017-06-01

Objective. To assess the effect of incorporating virtual patient activities in a pharmacy skills lab on student competence and confidence when conducting real-time comprehensive clinic visits with mock patients. Methods. Students were randomly assigned to a control or intervention group. The control group completed the clinic visit prior to completing virtual patient activities. The intervention group completed the virtual patient activities prior to the clinic visit. Student proficiency was evaluated in the mock lab. All students completed additional exercises with the virtual patient and were subsequently assessed. Student impressions were assessed via a pre- and post-experience survey. Results. Student performance conducting clinic visits was higher in the intervention group compared to the control group. Overall student performance continued to improve in the subsequent module. There was no change in student confidence from pre- to post-experience. Student rating of the ease of use and realistic simulation of the virtual patient increased; however, student rating of the helpfulness of the virtual patient decreased. Despite student rating of the helpfulness of the virtual patient program, student performance improved. Conclusion. Virtual patient activities enhanced student performance during mock clinic visits. Students felt the virtual patient realistically simulated a real patient. Virtual patients may provide additional learning opportunities for students.

Age 60 study, part II : airline pilot age and performance - a review of the scientific literature.

DOT National Transportation Integrated Search

1994-10-01

This review of the literature establishes the scientific foundation for subsequent studies on the Age 60 Rule research conducted under a contract with Hilton Systems, Inc. The scientific literature relevant to the two separate scientific approaches r...

Re-examination of the 1994 and subsequent sewer and culvert installations of various pipe types, sizes and depths.

DOT National Transportation Integrated Search

2014-02-01

In 1994 the Michigan Department of Transportation (MDOT) initiated a sewer and culvert : condition research conducted at various locations throughout Southeast and Southwest : Michigan to review the performance of concrete, plastic and metal pipe tha...

A high-performance, flexible and robust metal nanotrough-embedded transparent conducting film for wearable touch screen panels.

PubMed

Im, Hyeon-Gyun; An, Byeong Wan; Jin, Jungho; Jang, Junho; Park, Young-Geun; Park, Jang-Ung; Bae, Byeong-Soo

2016-02-21

We report a high-performance, flexible and robust metal nanotrough-embedded transparent conducting hybrid film (metal nanotrough-GFRHybrimer). Using an electro-spun polymer nanofiber web as a template and vacuum-deposited gold as a conductor, a junction resistance-free continuous metal nanotrough network is formed. Subsequently, the metal nanotrough is embedded on the surface of a glass-fabric reinforced composite substrate (GFRHybrimer). The monolithic composite structure of our transparent conducting film allows simultaneously high thermal stability (24 h at 250 °C in air), a smooth surface topography (Rrms < 1 nm) and excellent opto-electrical properties. A flexible touch screen panel (TSP) is fabricated using the transparent conducting films. The flexible TSP device stably operates on the back of a human hand and on a wristband.

Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2014

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silvas, A. J.; Lantow, Tiffany A.

This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2014 and includes inspection and repair activities completed at the following CAUs; CAU 400: Bomblet Pit and Five Points Landfill (TTR); CAU 407: Roller Coaster RadSafe Area (TTR); CAU 424: Area 3 Landfill Complexes (TTR); CAU 453: Area 9 UXO Landfill (TTR); and CAU 487: Thunderwell Site (TTR) Inspections were conducted according to the post-closure plans in the approved Closure Reports and subsequent correspondence with the Nevada Division ofmore » Environmental Protection. The post-closure inspection plans and subsequent correspondence modifying the requirements for each CAU are included in Appendix B. The inspection checklists are included in Appendix C. Photographs taken during inspections are included in Appendix D. The annual post-closure inspections were conducted on May 28, 2014. Maintenance was required at CAU 407. Animal burrows were backfilled and erosion repairs were performed. Vegetation monitoring was performed at CAU 407 in June 2014. The vegetation monitoring report is included in Appendix E.« less

Exercising Attention within the Classroom

ERIC Educational Resources Information Center

Hill, Liam; Williams, Justin H. G.; Aucott, Lorna; Milne, June; Thomson, Jenny; Greig, Jessie; Munro, Val; Mon-Williams, Mark

2010-01-01

Aim: To investigate whether increased physical exercise during the school day influenced subsequent cognitive performance in the classroom. Method: A randomized, crossover-design trial (two weeks in duration) was conducted in six mainstream primary schools (1224 children aged 8-11y). No data on sex was available. Children received a…

Adjustment of Conduction Band Edge of Compact TiO2 Layer in Perovskite Solar Cells Through TiCl4 Treatment.

PubMed

Murakami, Takurou N; Miyadera, Tetsuhiko; Funaki, Takashi; Cojocaru, Ludmila; Kazaoui, Said; Chikamatsu, Masayuki; Segawa, Hiroshi

2017-10-25

Perovskite solar cells (PSCs) without a mesoporous TiO 2 layer, that is, planar-type PSCs exhibit poorer cell performance as compared to PSCs with a porous TiO 2 layer, owing to inefficient electron transfer from the perovskite layer to the compact TiO 2 layer in the former case. The matching of the conduction band levels of perovskite and the compact TiO 2 layer is thus essential for enhancing PSC performance. In this study, we demonstrate the shifting of the conduction band edge (CBE) of the compact TiO 2 layer through a TiCl 4 treatment, with the aim of improving PSC performance. The CBE of the compact TiO 2 layer was shifted to a higher level through the TiCl 4 treatment and then shifted in the opposite direction, that is, to a lower level, through a subsequent heat treatment. These shifts in the CBE were reflected in the PSC performance. The TiCl 4 -treated PSC showed an increase in the open-circuit voltage of more than 150 mV, as well as a decrease of 100 mV after being heated at 450 °C. On the other hand, the short-circuit current decreased after the treatment but increased after heating at temperatures higher than 300 °C. The treated PSC subjected to subsequent heating at 300 °C exhibited the best performance, with the power conversion efficiency of the PSC being 17% under optimized conditions.

The Effects of Non-Contingent Reinforcement on Children.

ERIC Educational Resources Information Center

Tramill, James L.; Kleinhammer, P. Jeannie

Typical learned helplessness research has involved the presentation of non-contingent, aversive events followed by measures of performance on subsequent tasks; recent investigations have focused on the effect of non-contingent rewards. To examine the effects of non-contingent rewards on children, two studies were conducted, in which children were…

43 CFR 3484.1 - Performance standards for exploration and surface and underground mining.

Code of Federal Regulations, 2014 CFR

2014-10-01

... officer. Operators/lessees of underground coal mines shall adopt measures consistent with known technology... subsequent operations on the quantity, quality, or pressure of ground water or mine gases only with the... mines—(1) Underground resource recovery. Underground mining operations shall be conducted so as to...

43 CFR 3484.1 - Performance standards for exploration and surface and underground mining.

Code of Federal Regulations, 2011 CFR

2011-10-01

... officer. Operators/lessees of underground coal mines shall adopt measures consistent with known technology... subsequent operations on the quantity, quality, or pressure of ground water or mine gases only with the... mines—(1) Underground resource recovery. Underground mining operations shall be conducted so as to...

40 CFR 63.455 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... submit an initial notification of the subsequent performance test to the Administrator as soon as... be conducted. The owner or operator shall notify the Administrator as soon as practicable, but no... provisions of § 63.453(p)(3), the owner or operator shall notify the Administrator as soon as practicable of...

40 CFR 63.455 - Reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... submit an initial notification of the subsequent performance test to the Administrator as soon as... be conducted. The owner or operator shall notify the Administrator as soon as practicable, but no... provisions of § 63.453(p)(3), the owner or operator shall notify the Administrator as soon as practicable of...

Exponential fertilization of Pinus monticola seedlings: nutrient uptake efficiency, leaching fractions, and early outplanting performance

Treesearch

R. Kasten Dumroese; Deborah S. Page-Dumroese; K. Francis Salifu; Douglass F. Jacobs

2005-01-01

We evaluated nutrient uptake efficiency and subsequent leaching fractions for western white pine (Pinus monticola Dougl. ex D. Don) seedlings grown with exponentially increasing or conventional (constant) fertilization in a greenhouse. Conventional fertilization was associated with higher leachate electrical conductivity and greater nutrient losses,...

Students on Academic Probation at Bronx Community College: The Effects of Academic Probation on the Scholastic Performance of College Discovery Students. Report I.

ERIC Educational Resources Information Center

Santa Rita, Emilio

Between Fall 1976 and Spring 1978, a study was conducted at Bronx Community College (BCC) to determine: (1) the effect of probationary status on students' subsequent academic performance as measured by grade point average (GPA); (2) whether a response-to-probation phenomenon continued beyond the semester of probation; and (3) the effects of…

Could the negative effects of static stretching in warm-up be restored by sport specific exercise?

PubMed

Bengtsson, Victor; Yu, Ji-Guo; Gilenstam, Kajsa

2017-04-13

Static stretching (SS) is widely used in warm-up as it is generally believed to increase mobility and reduce the risk of injury; however, SS has been shown to induce transient negative effects on subsequent muscle performance. Interestingly, recent studies have shown that sport specific exercise could restore SS-induced negative effects on certain sports, especially of explosive muscular performance. Whether sport specific exercise could restore SS-induced negative effects on isokinetic muscle performance remains unclear. The present study conducted two different warm-ups: 2-component warm-up and 3-component warm-up on 15 university students. Both protocols contained low intensity aerobic exercise and sport specific exercise, whereas the 3-component warm-up also contained SS which has been previously proven to induce negative effects on subsequent muscle performance. After the warm-ups, the subjects performed an isokinetic test on a Biodex. To make the sport specific exercise mimic the subsequent test, both included concentric isokinetic knee extension. During the tests, muscle performance of peak torque, mean power, and total work was recorded. Comparison of the measurements on each parameter between the two warm-ups was performed using paired t test. The comparisons did not reveal any significant difference in the measurement of any parameter between the two different warm-up protocols, and calculation of Cohen's revealed small effect sizes on all of the three variables. On basis of the present results and that the SS could induce transient negative effects on subsequent muscle performance, we concluded that the negative effects of the SS on the variables were restored by the isokinetic contractions.

Evaluation the course of the vehicle braking process in case of hydraulic circuit malfunction

NASA Astrophysics Data System (ADS)

Szczypiński-Sala, W.; Lubas, J.

2016-09-01

In the paper, the results of the research were discussed, the aim of which was the evaluation of the vehicle braking performance efficiency and the course of this process with regard to the dysfunction which may occur in braking hydraulic circuit. As part of the research, on-road tests were conducted. During the research, the delay of the vehicle when braking was measured with the use of the set of sensors placed in the parallel and the perpendicular axis of the vehicle. All the tests were conducted on the same flat section of asphalt road with wet surface. Conditions of diminished tire-to-road adhesion were chosen in order to force the activity of anti-lock braking system. The research was conducted comparatively for the vehicle with acting anti-lock braking system and subsequently for the vehicle without the system. In both cases, there was a subsequent evaluation of the course of braking with efficient braking system and with the dysfunction of hydraulic circuit.

40 CFR 63.2362 - When must I conduct subsequent performance tests?

Code of Federal Regulations, 2010 CFR

2010-07-01

... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non... equipment and that is loaded with organic liquids at a transfer rack that is subject to control based on the... current certification in accordance with the U.S. DOT pressure test requirements in 49 CFR part 180 for...

Analysis of Associate Degree Program for Traffic Safety Technicians. Final Report.

ERIC Educational Resources Information Center

Shimada, Jonathan K.

A study was conducted to evaluate the impact of the Associate Degree Program for Traffic Engineering Technicians (TET's) offered at three community colleges on students' subsequent job performance as technicians. Data were collected by means of personal interviews and telephone interviews with 81 students, their primary instructors, and their…

Fabrication of Conductive Macroporous Structures Through Nano-phase Separation Method

NASA Astrophysics Data System (ADS)

Kim, Soohyun; Lee, Hyunjung

2018-03-01

Thermoelectric power generation performance is characterized on the basis of the figure of merit, which tends to be high in thermoelectric materials with high electrical conductivity and low thermal conductivity. Porous structures cause phonon scattering, which decreases thermal conductivity. In this study, we fabricated porous structures for thermoelectric devices via nano-phase separation of silica particles from a polyacrylonitrile (PAN) matrix via a sol-gel process. The porosity was determined by control of silica particle size with various the mixing ratio of tetraethylorthosilicate as the precursor of silica particles to PAN. High electrical conductivity was maintained by subsequent carbonization of the PAN matrix in spited of a high porosity. As the results, the conductive porous structures having porosity from 13.9 to 83.3 (%) was successfully fabricated, keeping their electrical conductivities.

Oxygen-modulated quantum conductance for ultrathin HfO 2 -based memristive switching devices

DOE PAGES

Zhong, Xiaoliang; Rungger, Ivan; Zapol, Peter; ...

2016-10-24

Memristive switching devices, candidates for resistive random access memory technology, have been shown to switch off through a progression of states with quantized conductance and subsequent noninteger conductance (in terms of conductance quantum G 0). We have performed calculations based on density functional theory to model the switching process for a Pt-HfO 2-Pt structure, involving the movement of one or two oxygen atoms. Oxygen atoms moving within a conductive oxygen vacancy filament act as tunneling barriers, and partition the filament into weakly coupled quantum wells. We show that the low-bias conductance decreases exponentially when one oxygen atom moves away frommore » interface. In conclusion, our results demonstrate the high sensitivity of the device conductance to the position of oxygen atoms.« less

Oxygen-modulated quantum conductance for ultrathin HfO 2 -based memristive switching devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhong, Xiaoliang; Rungger, Ivan; Zapol, Peter

Memristive switching devices, candidates for resistive random access memory technology, have been shown to switch off through a progression of states with quantized conductance and subsequent noninteger conductance (in terms of conductance quantum G 0). We have performed calculations based on density functional theory to model the switching process for a Pt-HfO 2-Pt structure, involving the movement of one or two oxygen atoms. Oxygen atoms moving within a conductive oxygen vacancy filament act as tunneling barriers, and partition the filament into weakly coupled quantum wells. We show that the low-bias conductance decreases exponentially when one oxygen atom moves away frommore » interface. In conclusion, our results demonstrate the high sensitivity of the device conductance to the position of oxygen atoms.« less

Does distraction facilitate problem-focused coping with job stress? A 1 year longitudinal study.

PubMed

Shimazu, Akihito; Schaufeli, Wilmar B

2007-10-01

This study examined the sole and combined effects of problem-focused coping and distraction on employee well-being (i.e., stress responses and job performance) using two-wave panel survey data with a 1-year time lag. Participants were 488 male employees, who worked for a construction machinery company in western Japan. Hierarchical multiple regression analyses were conducted to examine whether distraction moderates the relationship of problem-focused coping with well-being. More use of problem-focused coping was negatively related to subsequent stress responses among those high in distraction. The combination of high problem-focused coping and high distraction was positively related to subsequent job performance, although it was limited only to the high job stress situation. Results suggest that the combination of high problem-focused coping and high distraction may lead to lower stress responses and better performance (but only in high job stress situations for performance) than the combination of high problem-focused coping and low distraction, at least for male blue-collar workers.

Medical students review of formative OSCE scores, checklists, and videos improves with student-faculty debriefing meetings

PubMed Central

Bernard, Aaron W.; Ceccolini, Gabbriel; Feinn, Richard; Rockfeld, Jennifer; Rosenberg, Ilene; Thomas, Listy; Cassese, Todd

2017-01-01

ABSTRACT Background: Performance feedback is considered essential to clinical skills development. Formative objective structured clinical exams (F-OSCEs) often include immediate feedback by standardized patients. Students can also be provided access to performance metrics including scores, checklists, and video recordings after the F-OSCE to supplement this feedback. How often students choose to review this data and how review impacts future performance has not been documented. Objective: We suspect student review of F-OSCE performance data is variable. We hypothesize that students who review this data have better performance on subsequent F-OSCEs compared to those who do not. We also suspect that frequency of data review can be improved with faculty involvement in the form of student-faculty debriefing meetings. Design: Simulation recording software tracks and time stamps student review of performance data. We investigated a cohort of first- and second-year medical students from the 2015-16 academic year. Basic descriptive statistics were used to characterize frequency of data review and a linear mixed-model analysis was used to determine relationships between data review and future F-OSCE performance. Results: Students reviewed scores (64%), checklists (42%), and videos (28%) in decreasing frequency. Frequency of review of all metric and modalities improved when student-faculty debriefing meetings were conducted (p<.001). Among 92 first-year students, checklist review was associated with an improved performance on subsequent F-OSCEs (p = 0.038) by 1.07 percentage points on a scale of 0-100. Among 86 second year students, no review modality was associated with improved performance on subsequent F-OSCEs. Conclusion: Medical students review F-OSCE checklists and video recordings less than 50% of the time when not prompted. Student-faculty debriefing meetings increased student data reviews. First-year student’s review of checklists on F-OSCEs was associated with increases in performance on subsequent F-OSCEs, however this outcome was not observed among second-year students. PMID:28521646

Medical students review of formative OSCE scores, checklists, and videos improves with student-faculty debriefing meetings.

PubMed

Bernard, Aaron W; Ceccolini, Gabbriel; Feinn, Richard; Rockfeld, Jennifer; Rosenberg, Ilene; Thomas, Listy; Cassese, Todd

2017-01-01

Performance feedback is considered essential to clinical skills development. Formative objective structured clinical exams (F-OSCEs) often include immediate feedback by standardized patients. Students can also be provided access to performance metrics including scores, checklists, and video recordings after the F-OSCE to supplement this feedback. How often students choose to review this data and how review impacts future performance has not been documented. We suspect student review of F-OSCE performance data is variable. We hypothesize that students who review this data have better performance on subsequent F-OSCEs compared to those who do not. We also suspect that frequency of data review can be improved with faculty involvement in the form of student-faculty debriefing meetings. Simulation recording software tracks and time stamps student review of performance data. We investigated a cohort of first- and second-year medical students from the 2015-16 academic year. Basic descriptive statistics were used to characterize frequency of data review and a linear mixed-model analysis was used to determine relationships between data review and future F-OSCE performance. Students reviewed scores (64%), checklists (42%), and videos (28%) in decreasing frequency. Frequency of review of all metric and modalities improved when student-faculty debriefing meetings were conducted (p<.001). Among 92 first-year students, checklist review was associated with an improved performance on subsequent F-OSCEs (p = 0.038) by 1.07 percentage points on a scale of 0-100. Among 86 second year students, no review modality was associated with improved performance on subsequent F-OSCEs. Medical students review F-OSCE checklists and video recordings less than 50% of the time when not prompted. Student-faculty debriefing meetings increased student data reviews. First-year student's review of checklists on F-OSCEs was associated with increases in performance on subsequent F-OSCEs, however this outcome was not observed among second-year students.

Discriminative stimuli that control instrumental tobacco-seeking by human smokers also command selective attention.

PubMed

Hogarth, Lee; Dickinson, Anthony; Duka, Theodora

2003-08-01

Incentive salience theory states that acquired bias in selective attention for stimuli associated with tobacco-smoke reinforcement controls the selective performance of tobacco-seeking and tobacco-taking behaviour. To support this theory, we assessed whether a stimulus that had acquired control of a tobacco-seeking response in a discrimination procedure would command the focus of visual attention in a subsequent test phase. Smokers received discrimination training in which an instrumental key-press response was followed by tobacco-smoke reinforcement when one visual discriminative stimulus (S+) was present, but not when another stimulus (S-) was present. The skin conductance response to the S+ and S- assessed whether Pavlovian conditioning to the S+ had taken place. In a subsequent test phase, the S+ and S- were presented in the dot-probe task and the allocation of the focus of visual attention to these stimuli was measured. Participants learned to perform the instrumental tobacco-seeking response selectively in the presence of the S+ relative to the S-, and showed a greater skin conductance response to the S+ than the S-. In the subsequent test phase, participants allocated the focus of visual attention to the S+ in preference to the S-. Correlation analysis revealed that the visual attentional bias for the S+ was positively associated with the number of times the S+ had been paired with tobacco-smoke in training, the skin conductance response to the S+ and with subjective craving to smoke. Furthermore, increased exposure to tobacco-smoke in the natural environment was associated with reduced discrimination learning. These data demonstrate that discriminative stimuli that signal that tobacco-smoke reinforcement is available acquire the capacity to command selective attentional and elicit instrumental tobacco-seeking behaviour.

The Predictive Value of Ultrasound Learning Curves Across Simulated and Clinical Settings.

PubMed

Madsen, Mette E; Nørgaard, Lone N; Tabor, Ann; Konge, Lars; Ringsted, Charlotte; Tolsgaard, Martin G

2017-01-01

The aim of the study was to explore whether learning curves on a virtual-reality (VR) sonographic simulator can be used to predict subsequent learning curves on a physical mannequin and learning curves during clinical training. Twenty midwives completed a simulation-based training program in transvaginal sonography. The training was conducted on a VR simulator as well as on a physical mannequin. A subgroup of 6 participants underwent subsequent clinical training. During each of the 3 steps, the participants' performance was assessed using instruments with established validity evidence, and they advanced to the next level only after attaining predefined levels of performance. The number of repetitions and time needed to achieve predefined performance levels were recorded along with the performance scores in each setting. Finally, the outcomes were correlated across settings. A good correlation was found between time needed to achieve predefined performance levels on the VR simulator and the physical mannequin (Pearson correlation coefficient .78; P < .001). Performance scores on the VR simulator correlated well to the clinical performance scores (Pearson correlation coefficient .81; P = .049). No significant correlations were found between numbers of attempts needed to reach proficiency across the 3 different settings. A post hoc analysis found that the 50% fastest trainees at reaching proficiency during simulation-based training received higher clinical performance scores compared to trainees with scores placing them among the 50% slowest (P = .025). Performances during simulation-based sonography training may predict performance in related tasks and subsequent clinical learning curves. © 2016 by the American Institute of Ultrasound in Medicine.

The Value of Peer Feedback Opportunities for Students in Writing Intensive Classes

ERIC Educational Resources Information Center

Kennette, Lynne N.; Frank, Nichole M.

2013-01-01

The present study was conducted to examine the usefulness of peer feedback on APA-style research papers in a writing-intensive class. Subsequent to APA training, students were asked to review and provide feedback on a classmate's APA-style research report for both content and formatting. Performance on this research report was then compared to…

The Impact of a Community College Cooperative Education Program on the Performance of its Graduates.

ERIC Educational Resources Information Center

Ehrlich, Dan J.; Heinemann, Harry N.

A study was conducted for the purpose of determining the impact of cooperative education (CE) on the experiences of community college students subsequent to their graduation. Comprehensive normative data on graduates and non-completers of LaGuardia Community College, which has a universal CE program, were collected by means of surveys.…

Effects of Acid Deposition on Wood

Treesearch

Mark Knaebe

2013-01-01

Since acid deposition increases the rate of deterioration of unpainted wood, it can also affect the performance of paint applied to this weathered wood. In tests conducted near Madison, Wisconsin, smooth-planed wood was allowed to weather before painting. Exposure for as little as 2 weeks shortened the service life of the subsequently applied paint. The paint bond was...

Fabrication of ordered NiO coated Si nanowire array films as electrodes for a high performance lithium ion battery.

PubMed

Qiu, M C; Yang, L W; Qi, X; Li, Jun; Zhong, J X

2010-12-01

Highly ordered NiO coated Si nanowire array films are fabricated as electrodes for a high performance lithium ion battery via depositing Ni on electroless-etched Si nanowires and subsequently annealing. The structures and morphologies of as-prepared films are characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. When the potential window versus lithium was controlled, the coated NiO can be selected to be electrochemically active to store and release Li+ ions, while highly conductive crystalline Si cores function as nothing more than a stable mechanical support and an efficient electrical conducting pathway. The hybrid nanowire array films exhibit superior cyclic stability and reversible capacity compared to that of NiO nanostructured films. Owing to the ease of large-scale fabrication and superior electrochemical performance, these hybrid nanowire array films will be promising anode materials for high performance lithium-ion batteries.

Advanced Technology Composite Fuselage-Structural Performance

NASA Technical Reports Server (NTRS)

Walker, T. H.; Minguet, P. J.; Flynn, B. W.; Carbery, D. J.; Swanson, G. D.; Ilcewicz, L. B.

1997-01-01

Boeing is studying the technologies associated with the application of composite materials to commercial transport fuselage structure under the NASA-sponsored contracts for Advanced Technology Composite Aircraft Structures (ATCAS) and Materials Development Omnibus Contract (MDOC). This report addresses the program activities related to structural performance of the selected concepts, including both the design development and subsequent detailed evaluation. Design criteria were developed to ensure compliance with regulatory requirements and typical company objectives. Accurate analysis methods were selected and/or developed where practical, and conservative approaches were used where significant approximations were necessary. Design sizing activities supported subsequent development by providing representative design configurations for structural evaluation and by identifying the critical performance issues. Significant program efforts were directed towards assessing structural performance predictive capability. The structural database collected to perform this assessment was intimately linked to the manufacturing scale-up activities to ensure inclusion of manufacturing-induced performance traits. Mechanical tests were conducted to support the development and critical evaluation of analysis methods addressing internal loads, stability, ultimate strength, attachment and splice strength, and damage tolerance. Unresolved aspects of these performance issues were identified as part of the assessments, providing direction for future development.

Energy conservation investment program, FY95 limited energy study area B nitric acid production facilities Holston Army Ammunition Plant Kingsport, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-12-31

In June 1995, Affiliated Engineers SE, Inc. (AESE) was retained by the Mobile District U.S. Army Corps of Engineers to perform a Limited Energy Study for Holston Army Ammunition Plant, Kingsport, Tennessee. The field survey of existing conditions was completed in July 1995. The results of this field survey were subsequently tabulated and used to generate single line process flow diagrams on Autocad. A subsequent one day field survey was conducted in August 1995. This report summarizes the results obtained from field investigation and the analysis of various alternative Energy Conservation Opportunities (ECO`s).

40 CFR 60.4415 - How do I conduct the initial and subsequent performance tests for sulfur?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., 8, or 20 in appendix A of this part. In addition, the American Society of Mechanical Engineers (ASME... appendix A of this part, and measure and record the electrical and thermal output from the unit. Then use... the run, in ppm Qstd = stack gas volumetric flow rate, in dscf/hr P = gross electrical and mechanical...

40 CFR 60.4415 - How do I conduct the initial and subsequent performance tests for sulfur?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., 8, or 20 in appendix A of this part. In addition, the American Society of Mechanical Engineers (ASME... appendix A of this part, and measure and record the electrical and thermal output from the unit. Then use... the run, in ppm Qstd = stack gas volumetric flow rate, in dscf/hr P = gross electrical and mechanical...

40 CFR 60.4415 - How do I conduct the initial and subsequent performance tests for sulfur?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., 8, or 20 in appendix A of this part. In addition, the American Society of Mechanical Engineers (ASME... appendix A of this part, and measure and record the electrical and thermal output from the unit. Then use... the run, in ppm Qstd = stack gas volumetric flow rate, in dscf/hr P = gross electrical and mechanical...

40 CFR 60.4415 - How do I conduct the initial and subsequent performance tests for sulfur?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., 8, or 20 in appendix A of this part. In addition, the American Society of Mechanical Engineers (ASME... appendix A of this part, and measure and record the electrical and thermal output from the unit. Then use... the run, in ppm Qstd = stack gas volumetric flow rate, in dscf/hr P = gross electrical and mechanical...

40 CFR 60.4415 - How do I conduct the initial and subsequent performance tests for sulfur?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., 8, or 20 in appendix A of this part. In addition, the American Society of Mechanical Engineers (ASME... appendix A of this part, and measure and record the electrical and thermal output from the unit. Then use... the run, in ppm Qstd = stack gas volumetric flow rate, in dscf/hr P = gross electrical and mechanical...

Influence of Point Count Length and Repeated Visits on Habitat Model Performance

Treesearch

Randy Dettmers; David A. Buehler; John G. Bartlett; Nathan A. Klaus

1999-01-01

Point counts are commonly used to monitor bird populations, and a substantial amount of research has investigated how conducting counts for different lengths of time affects the accuracy of these counts and the subsequent ability to monitor changes in population trends. However, little work has been done io assess how changes in count duration affect bird-habitat...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Huifang; Lam, William; Remias, Joseph

Mobile source emissions standards are becoming more stringent and particulate emissions from gasoline direct injection (GDI) engines represent a particular challenge. Gasoline particulate filter (GPF) is deemed as one possible technical solution for particulate emissions reduction. In this work, a study was conducted on eight formulations of lubricants to determine their effect on GDI engine particulate emissions and GPF performance. Accelerated ash loading tests were conducted on a 2.4L GDI engine with engine oil injection in gasoline fuel by 2%. The matrix of eight formulations was designed with changing levels of sulfated ash (SASH) level, Zinc dialkyldithiophosphates (ZDDP) level andmore » detergent type. Comprehensive evaluations of particulates included mass, number, size distribution, composition, morphology and soot oxidation properties. GPF performance was assessed through filtration efficiency, back pressure and morphology. It was determined that oil formulation affects the particulate emission characteristics and subsequent GPF performance.« less

A novel method for landslide displacement prediction by integrating advanced computational intelligence algorithms.

PubMed

Zhou, Chao; Yin, Kunlong; Cao, Ying; Ahmed, Bayes; Fu, Xiaolin

2018-05-08

Landslide displacement prediction is considered as an essential component for developing early warning systems. The modelling of conventional forecast methods requires enormous monitoring data that limit its application. To conduct accurate displacement prediction with limited data, a novel method is proposed and applied by integrating three computational intelligence algorithms namely: the wavelet transform (WT), the artificial bees colony (ABC), and the kernel-based extreme learning machine (KELM). At first, the total displacement was decomposed into several sub-sequences with different frequencies using the WT. Next each sub-sequence was predicted separately by the KELM whose parameters were optimized by the ABC. Finally the predicted total displacement was obtained by adding all the predicted sub-sequences. The Shuping landslide in the Three Gorges Reservoir area in China was taken as a case study. The performance of the new method was compared with the WT-ELM, ABC-KELM, ELM, and the support vector machine (SVM) methods. Results show that the prediction accuracy can be improved by decomposing the total displacement into sub-sequences with various frequencies and by predicting them separately. The ABC-KELM algorithm shows the highest prediction capacity followed by the ELM and SVM. Overall, the proposed method achieved excellent performance both in terms of accuracy and stability.

Effects of pretesting implicit self-determined motivation on behavioral engagement: evidence for the mere measurement effect at the implicit level.

PubMed

Keatley, David A; Clarke, David D; Ferguson, Eamonn; Hagger, Martin S

2014-01-01

Research into individuals' intended behavior and performance has traditionally adopted explicitly measured, self-report constructs, and outcomes. More recently, research has shown that completing explicit self-report measures of constructs may effect subsequent behavior, termed the "mere measurement" effect. The aim of the present experiment was to investigate whether implicit measures of motivation showed a similar mere measurement effect on subsequent behavior. It may be the case that measuring the implicit systems affects subsequent implicit interventions (e.g., priming), observable on subsequent behavior. Priming manipulations were also given to participants in order to investigate the interaction between measurement and priming of motivation. Initially, a 2 [implicit association test (IAT: present vs. absent) ×2 (Prime: autonomous vs. absent) and a 2 (IAT: present vs. absent) × 2 (Prime: controlled vs. absent)] between participants designs were conducted, these were them combined into a 2 (IAT: present vs. absent) ×3 (Prime: autonomous vs. controlled vs. absent) between participants design, with attempts at a novel task taken as the outcome measure. Implicit measure completion significantly decreased behavioral engagement. Priming autonomous motivation significantly facilitated, and controlled motivation significantly inhibited performance. Finally, there was a significant implicit measurement × priming interaction, such that priming autonomous motivation only improved performance in the absence of the implicit measure. Overall, this research provides an insight into the effects of implicit measurement and priming of motivation and the combined effect of completing both tasks on behavior.

Regret causes ego-depletion and finding benefits in the regrettable events alleviates ego-depletion.

PubMed

Gao, Hongmei; Zhang, Yan; Wang, Fang; Xu, Yan; Hong, Ying-Yi; Jiang, Jiang

2014-01-01

This study tested the hypotheses that experiencing regret would result in ego-depletion, while finding benefits (i.e., "silver linings") in the regret-eliciting events counteracted the ego-depletion effect. Using a modified gambling paradigm (Experiments 1, 2, and 4) and a retrospective method (Experiments 3 and 5), five experiments were conducted to induce regret. Results revealed that experiencing regret undermined performance on subsequent tasks, including a paper-and-pencil calculation task (Experiment 1), a Stroop task (Experiment 2), and a mental arithmetic task (Experiment 3). Furthermore, finding benefits in the regret-eliciting events improved subsequent performance (Experiments 4 and 5), and this improvement was mediated by participants' perceived vitality (Experiment 4). This study extended the depletion model of self-regulation by considering emotions with self-conscious components (in our case, regret). Moreover, it provided a comprehensive understanding of how people felt and performed after experiencing regret and after finding benefits in the events that caused the regret.

Hybrid local piezoelectric and conductive functions for high performance airborne sound absorption

NASA Astrophysics Data System (ADS)

Rahimabady, Mojtaba; Statharas, Eleftherios Christos; Yao, Kui; Sharifzadeh Mirshekarloo, Meysam; Chen, Shuting; Tay, Francis Eng Hock

2017-12-01

A concept of hybrid local piezoelectric and electrical conductive functions for improving airborne sound absorption is proposed and demonstrated in composite foam made of porous polar polyvinylidene fluoride (PVDF) mixed with conductive single-walled carbon nanotube (SWCNT). According to our hybrid material function design, the local piezoelectric effect in the PVDF matrix with the polar structure and the electrical resistive loss of SWCNT enhanced sound energy conversion to electrical energy and subsequently to thermal energy, respectively, in addition to the other known sound absorption mechanisms in a porous material. It is found that the overall energy conversion and hence the sound absorption performance are maximized when the concentration of the SWCNT is around the conductivity percolation threshold. For the optimal composition of PVDF/5 wt. % SWCNT, a sound reduction coefficient of larger than 0.58 has been obtained, with a high sound absorption coefficient higher than 50% at 600 Hz, showing their great values for passive noise mitigation even at a low frequency.

Conductivity dependence of lithium diffusivity and electrochemical performance for electrospun TiO2 fibers

NASA Astrophysics Data System (ADS)

Qing, Rui; Liu, Li; Bohling, Christian; Sigmund, Wolfgang

2015-01-01

TiO2 is one of the most exciting anode candidates for safe application in lithium ion batteries. However, its low intrinsic electronic conductivity limits application. In this paper, a simple sol-gel based route is presented to produce nanosize TiO2 fibers with 119 ± 27 nm diameters via electrospinning. Subsequent calcination in various atmospheres was applied to achieve anatase and anatase-rutile mixed phase crystallites with and without carbon coating. The crystallite size was 5 nm for argon calcined fibers and 13-20 nm for air calcined fibers. Argon calcined TiO2 nanofibers exhibited electronic conductivity orders of magnitude higher than those of air-calcined samples. Lithium diffusivity was increased by one time and specific capacity by 26.9% due to the enhanced conductivity. It also had a different intercalation mechanism of lithium. Hydrogen post heat-treatment was found to benefit electronic conductivity (by 3-4.5 times), lithium diffusivity (1.5-2 times) and consequently the high rate performance of the TiO2 nanofibers (over 80%). The inner mechanism and structure-property relations among these parameters were also discussed.

7 CFR 3022.5 - Reservation of right to conduct subsequent inquiry, investigation, and adjudication.

Code of Federal Regulations, 2013 CFR

2013-01-01

... USDA-FUNDED EXTRAMURAL RESEARCH; RESEARCH MISCONDUCT § 3022.5 Reservation of right to conduct subsequent inquiry, investigation, and adjudication. (a) USDA reserves the right to conduct its own inquiry.... This may be necessary if the USDA RIO or ARIO believes, in his or her sound discretion, that despite...

7 CFR 3022.5 - Reservation of right to conduct subsequent inquiry, investigation, and adjudication.

Code of Federal Regulations, 2014 CFR

2014-01-01

... USDA-FUNDED EXTRAMURAL RESEARCH; RESEARCH MISCONDUCT § 3022.5 Reservation of right to conduct subsequent inquiry, investigation, and adjudication. (a) USDA reserves the right to conduct its own inquiry.... This may be necessary if the USDA RIO or ARIO believes, in his or her sound discretion, that despite...

Synthesis of Co 2SnO 4@C core-shell nanostructures with reversible lithium storage

NASA Astrophysics Data System (ADS)

Qi, Yue; Du, Ning; Zhang, Hui; Wu, Ping; Yang, Deren

This paper reports the synthesis of Co 2SnO 4@C core-shell nanostructures through a simple glucose hydrothermal and subsequent carbonization approach. The as-synthesized Co 2SnO 4@C core-shell nanostructures have been applied as anode materials for lithium-ion batteries, which exhibit improved cyclic performance compared to pure Co 2SnO 4 nanocrystals. The carbon matrix has good volume buffering effect and high electronic conductivity, which may be responsible for the improved cyclic performance.

Carbon-coated SnO2 nanotubes: template-engaged synthesis and their application in lithium-ion batteries

NASA Astrophysics Data System (ADS)

Wu, Ping; Du, Ning; Zhang, Hui; Yu, Jingxue; Qi, Yue; Yang, Deren

2011-02-01

This paper reports the synthesis of carbon-coated SnO2 (SnO2-C) nanotubes through a simple glucose hydrothermal and subsequent carbonization approach by using Sn nanorods as sacrificial templates. The as-synthesized SnO2-C nanotubes have been applied as anode materials for lithium-ion batteries, which exhibit improved cyclic performance compared to pure SnO2 nanotubes. The hollow nanostructure, together with the carbon matrix which has good buffering effect and high electronic conductivity, can be responsible for the improved cyclic performance.

Conduct Disorder Symptoms and Subsequent Pregnancy, Child-Birth and Abortion: A Population-Based Longitudinal Study of Adolescents

ERIC Educational Resources Information Center

Pedersen, Willy; Mastekaasa, Arne

2011-01-01

Research on teenage pregnancy and abortion has primarily focused on socio-economic disadvantage. However, a few studies suggest that risk of unwanted pregnancy is related to conduct disorder symptoms. We examined the relationship between level of conduct disorder symptoms at age 15 and subsequent pregnancy, child-birth and abortion. A…

Advanced space engine preliminary design. [liquid hydrogen/liquid oxygen upper stage engine for space tug application

NASA Technical Reports Server (NTRS)

Zachary, A. T.

1973-01-01

Analysis and design of an optimum LO2/LH2, combustion topping cycle, 88,964 Newtons (20,000-pound) thrust, liquid rocket engine was conducted. The design selected is well suited to high-energy, upper-stage engine applications such as the Space Tug and embodies features directed toward optimization of vehicle performance. A configuration selection was conducted based on prior Air Force Contracts, and additional criteria for optimum stage performance. Following configuration selection, analyses and design of the major components and engine systems were conducted to sufficient depth to provide layout drawings suitable for subsequent detailing. In addition, engine packaging to a common interface and a retractable nozzle concept were defined. Alternative development plans and related costs were also established. The design embodies high-performance, low-weight, low NPSH requirements (saturated propellant inlet conditions at start), idle-mode operation, and autogenous pressurization. The design is the result of the significant past and current LO2/LH2 technology efforts of the NASA centers and the Air Force, as well as company-funded programs.

Definition of performance specifications for automated Analytical Electrophoresis Facility (AAEF)

NASA Technical Reports Server (NTRS)

Brooks, D. E.

1976-01-01

In order to provide specifications for the automated Analytical Electrophoresis Facility (AAEF) that would satisfy the broadest variety of demands of a future user community, a survey was carried out of all those people who were identified as having published papers on cell electrophoresis in the past four years. A computer search was conducted of the relevant literature from which a list of 87 investigators was derived and defined as the user community for purposes of the mailing. A questionnaire was developed covering the areas of performance which required definition which was subsequently circulated to the user community. Based on the response to this survey performance specifications were assembled.

Design of a video system providing optimal visual information for controlling payload and experiment operations with television

NASA Technical Reports Server (NTRS)

1975-01-01

A program was conducted which included the design of a set of simplified simulation tasks, design of apparatus and breadboard TV equipment for task performance, and the implementation of a number of simulation tests. Performance measurements were made under controlled conditions and the results analyzed to permit evaluation of the relative merits (effectivity) of various TV systems. Burden factors were subsequently generated for each TV system to permit tradeoff evaluation of system characteristics against performance. For the general remote operation mission, the 2-view system is recommended. This system is characterized and the corresponding equipment specifications were generated.

A systems-level performance history of get away specials after 25 space shuttle missions

NASA Technical Reports Server (NTRS)

Ridenoure, Rex W.

1987-01-01

Summarized are the results of a thorough performance study of Get Away Special (GAS) payloads conducted in 1986. During the study, a complete list of standard and non-standard GAS payloads vs. Shuttle mission was constructed, including specific titles for the experiments in each canister. A broad data base for each canister and each experiment was then compiled. Performance results were then obtained for all but a few experiments. The canisters and experiments were subsequently categorized according to the degree of experiment success. For those experiments experiencing failures or anomalies, several correlations and generalizations were extracted from individual subsystem performance data. Recommendations are made which may enhance the success and performance of future GAS payloads.

Impact of singular excessive computer game and television exposure on sleep patterns and memory performance of school-aged children.

PubMed

Dworak, Markus; Schierl, Thomas; Bruns, Thomas; Strüder, Heiko Klaus

2007-11-01

Television and computer game consumption are a powerful influence in the lives of most children. Previous evidence has supported the notion that media exposure could impair a variety of behavioral characteristics. Excessive television viewing and computer game playing have been associated with many psychiatric symptoms, especially emotional and behavioral symptoms, somatic complaints, attention problems such as hyperactivity, and family interaction problems. Nevertheless, there is insufficient knowledge about the relationship between singular excessive media consumption on sleep patterns and linked implications on children. The aim of this study was to investigate the effects of singular excessive television and computer game consumption on sleep patterns and memory performance of children. Eleven school-aged children were recruited for this polysomnographic study. Children were exposed to voluntary excessive television and computer game consumption. In the subsequent night, polysomnographic measurements were conducted to measure sleep-architecture and sleep-continuity parameters. In addition, a visual and verbal memory test was conducted before media stimulation and after the subsequent sleeping period to determine visuospatial and verbal memory performance. Only computer game playing resulted in significant reduced amounts of slow-wave sleep as well as significant declines in verbal memory performance. Prolonged sleep-onset latency and more stage 2 sleep were also detected after previous computer game consumption. No effects on rapid eye movement sleep were observed. Television viewing reduced sleep efficiency significantly but did not affect sleep patterns. The results suggest that television and computer game exposure affect children's sleep and deteriorate verbal cognitive performance, which supports the hypothesis of the negative influence of media consumption on children's sleep, learning, and memory.

Skin conductance and memory fragmentation after exposure to an emotional film clip in depersonalization disorder.

PubMed

Giesbrecht, Timo; Merckelbach, Harald; van Oorsouw, Kim; Simeon, Daphne

2010-05-30

It is often assumed that when confronted with an emotional event, patients with DPD inhibit information processing. It is also thought that this fosters memory fragmentation. This hypothesis has not been tested in chronic depersonalization. The aim of this study was to investigate the temporal pattern of autonomic responding to emotional material in depersonalization disorder, along with concomitant deficits in subjective and objective memory formation (i.e., difficulties to form a coherent narrative consisting of an ordered sequence of events). Participants with depersonalization disorder (n=14) and healthy control participants (n=14) viewed an emotional video clip while their skin conductance (SC) levels were measured. Peritraumatic dissociation was measured before and after the clip, and memory performance was measured 35 min after viewing. Compared to controls, depersonalized participants exhibited a distinctly different temporal pattern of autonomic responding, characterized by an earlier peak and subsequent flattening of SCLs. Maximum SCLs did not differ between the two groups. Moreover, unlike the control group, depersonalized participants showed no SC recovery after clip offset. In terms of memory performance, patients exhibited objective memory fragmentation, which they also reported subjectively. However, they did not differ from controls in free recall performance. Apparently, emotional responding in DPD is characterized by a shortened latency to peak with subsequent flattening and is accompanied by memory fragmentation in the light of otherwise unremarkable memory functioning. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

The impact of postpartum cervical tear on the occurrence of preterm birth in subsequent pregnancy.

PubMed

Zafran, Noah; Gerszman, Eden; Garmi, Gali; Zuaretz-Easton, Sivan; Salim, Raed

2017-08-01

To examine the occurrence of subsequent preterm birth (PTB) among women who experienced a cervical tear during prior delivery. A retrospective study conducted at a single teaching hospital on data from January 1994 to March 2014. The study group included all women who had a cervical tear detected at uterine and cervical examination, performed due to early postpartum hemorrhage. The control group consisted of women who delivered vaginally, experienced an early postpartum hemorrhage, and had an intact cervix at uterine and cervical examination. The control group was matched for maternal age and ethnicity at a ratio of 1:2. Women who had a cervical tear but then did not have a subsequent delivery, or had multiple fetal gestations or cervical cerclage at subsequent pregnancies were excluded. Primary outcome was spontaneous PTB rate (<37 weeks) in the subsequent pregnancy. Secondary outcomes included any PTBs in other subsequent pregnancies. Overall, 389 women were included. Of all cases of cervical tear, 129 were identified eligible and included in the final analysis. The control group included 260 women with an intact cervix. No significant differences were found between the study and control groups in the incidence of spontaneous PTB in the immediate subsequent pregnancy [1.6% (2/129) vs. 3.8% (10/260), respectively, p = 0.35]. The incidence of any spontaneous PTBs in all subsequent pregnancies did not differ also [4.7% (6/129) vs. 7.3% (19/260), respectively, p = 0.31]. Cervical tear detected after delivery does not increase the risk of spontaneous PTB in subsequent pregnancies.

Thermal conductivity study of warm dense matter by differential heating on LCLS and Titan

NASA Astrophysics Data System (ADS)

Hill, M.; McKelvey, A.; Jiang, S.; Shepherd, R.; Hau-Riege, S.; Whitley, H.; Sterne, P.; Hamel, S.; Collins, G.; Ping, Y.; Brown, C.; Floyd, E.; Fyrth, J.; Hoarty, D.; Hua, R.; Bailly-Grandvaux, M.; Beg, F.; Cho, B.; Kim, M.; Lee, J.; Lee, H.; Galtier, E.

2017-10-01

A differential heating platform has been developed for thermal conduction study, where a temperature gradient is induced and subsequent heat flow is probed by time-resolved diagnostics. Multiple experiment using this platform have been carried out at LCLS-MEC and Titan laser facilities for warm dense Al, Fe, amorphous carbon and diamond. Two single-shot time-resolved diagnostics are employed, SOP (streaked optical pyrometry) for surface temperature and FDI (Fourier Domain Interferometry) for surface expansion. Both diagnostics provided excellent data to constrain release equation-of-state (EOS) and thermal conductivity. Data sets with varying target thickness and comparison between simulations with different thermal conductivity models are presented. This work was performed under DOE contract DE-AC52-07NA27344 with support from DOE OFES Early Career program and LLNL LDRD program.

Porous CoO nanostructures grown on three-dimension graphene foams for supercapacitors electrodes

NASA Astrophysics Data System (ADS)

Deng, Wei; Lan, Wei; Sun, Yaru; Su, Qing; Xie, Erqing

2014-06-01

Three-dimensional graphene foams with good conductivity, light weight and chemical stability were produced by chemical vapor deposition. Then porous CoO nanowalls were deposited on graphene foam by a simple hydrothermal process and subsequent thermal treatment. This hybrid structures possessing large surface area in which the CoO nanowalls are separated by graphene foam with robust adhesion can directly serve as supercapacitor electrode including current collector without the need of any other binder materials and conductive agents. Electrochemical tests manifest a high specific capacitance of 231.87 F/g scaled to the mass of CoO (139.47 F/g for total mass of electrodes) at 1 A/g current, good rate capability and excellent cycling performance of >98% capacitance retention over 1000 cycles at 7 A/g current. The high conductivity, light weight and rational architectures, which provide fast electron pathway and the low diffusion resistance of ions, are responsible for the high performance of the electrodes.

Outcomes of Surgical Treatment for Anterior Tibial Stress Fractures in Athletes: A Systematic Review.

PubMed

Chaudhry, Zaira S; Raikin, Steven M; Harwood, Marc I; Bishop, Meghan E; Ciccotti, Michael G; Hammoud, Sommer

2017-12-01

Although most anterior tibial stress fractures heal with nonoperative treatment, some may require surgical management. To our knowledge, no systematic review has been conducted regarding surgical treatment strategies for the management of chronic anterior tibial stress fractures from which general conclusions can be drawn regarding optimal treatment in high-performance athletes. This systematic review was conducted to evaluate the surgical outcomes of anterior tibial stress fractures in high-performance athletes. Systematic review; Level of evidence, 4. In February 2017, a systematic review of the PubMed, MEDLINE, Cochrane, SPORTDiscus, and CINAHL databases was performed to identify studies that reported surgical outcomes for anterior tibial stress fractures. Articles meeting the inclusion criteria were screened, and reported outcome measures were documented. A total of 12 studies, published between 1984 and 2015, reporting outcomes for the surgical treatment of anterior tibial stress fractures were included in this review. All studies were retrospective case series. Collectively, surgical outcomes for 115 patients (74 males; 41 females) with 123 fractures were evaluated in this review. The overall mean follow-up was 23.3 months. The most common surgical treatment method reported in the literature was compression plating (n = 52) followed by drilling (n = 33). Symptom resolution was achieved in 108 of 123 surgically treated fractures (87.8%). There were 32 reports of complications, resulting in an overall complication rate of 27.8%. Subsequent tibial fractures were reported in 8 patients (7.0%). Moreover, a total of 17 patients (14.8%) underwent a subsequent procedure after their initial surgery. Following surgical treatment for anterior tibial stress fracture, 94.7% of patients were able to return to sports. The available literature indicates that surgical treatment of anterior tibial stress fractures is associated with a high rate of symptom resolution and return to play in athletes, although the high complication rate and potential need for subsequent procedures are important considerations for surgeons and patients.

Measuring thermal conductivity of thin films and coatings with the ultra-fast transient hot-strip technique

NASA Astrophysics Data System (ADS)

Belkerk, B. E.; Soussou, M. A.; Carette, M.; Djouadi, M. A.; Scudeller, Y.

2012-07-01

This paper reports the ultra-fast transient hot-strip (THS) technique for determining the thermal conductivity of thin films and coatings of materials on substrates. The film thicknesses can vary between 10 nm and more than 10 µm. Precise measurement of thermal conductivity was performed with an experimental device generating ultra-short electrical pulses, and subsequent temperature increases were electrically measured on nanosecond and microsecond time scales. The electrical pulses were applied within metallized micro-strips patterned on the sample films and the temperature increases were analysed within time periods selected in the window [100 ns-10 µs]. The thermal conductivity of the films was extracted from the time-dependent thermal impedance of the samples derived from a three-dimensional heat diffusion model. The technique is described and its performance demonstrated on different materials covering a large thermal conductivity range. Experiments were carried out on bulk Si and thin films of amorphous SiO2 and crystallized aluminum nitride (AlN). The present approach can assess film thermal resistances as low as 10-8 K m2 W-1 with a precision of about 10%. This has never been attained before with the THS technique.

Characteristic time scales of coalescence of silver nanocomposite and nanoparticle films induced by continuous wave laser irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paeng, Dongwoo; Grigoropoulos, Costas P., E-mail: cgrigoro@berkeley.edu; Lee, Daeho

2014-08-18

In-situ optical probing has been performed to analyze and compare the characteristic coalescence time scales of silver ion-doped polyvinylalcohol nanocomposite (Ag-PVA NC) and polyvinylpyrrolidone-capped silver nanoparticle (Ag-PVP NP) films subjected to continuous wave laser irradiation. The Ag-PVA NC yielded conductive metallic patterns by photothermal reduction of PVA, formation of nanoparticles from silver ions and their subsequent coalescence. On the other hand, Ag-PVP NP thin films produced conductive patterns through only coalescence of nanoparticles. Upon laser irradiation, Ag-PVA NC and Ag-PVP NP films exhibited different coalescence characteristics.

A molecular beam/quadrupole mass spectrometer system with synchronized beam modulation and digital waveform analysis

NASA Technical Reports Server (NTRS)

Pellett, G. L.; Adams, B. R.

1983-01-01

A performance evaluation is conducted for a molecular beam/mass spectrometer (MB/MS) system, as applied to a 1-30 torr microwave-discharge flow reactor (MWFR) used in the formation of the methylperoxy radical and a study of its subsequent destruction in the presence or absence of NO(x). The modulated MB/MS system is four-staged and differentially pumped. The results obtained by the MWFR study is illustrative of overall system performance, including digital waveform analysis; significant improvements over previous designs are noted in attainable S/N ratio, detection limit, and accuracy.

Morphological tuning of polymeric nanoparticles via microfluidic platform for fuel cell applications.

PubMed

Hasani-Sadrabadi, Mohammad Mahdi; Majedi, Fatemeh Sadat; VanDersarl, Jules John; Dashtimoghadam, Erfan; Ghaffarian, S Reza; Bertsch, Arnaud; Moaddel, Homayoun; Renaud, Philippe

2012-11-21

At nanoscale length scales, the properties of particles change rapidly with the slightest change in dimension. The use of a microfluidic platform enables precise control of sub-100 nm organic nanoparticles (NPs) based on polybenzimidazole. Using hydrodynamic flow focusing, we can control the size and shape of the NPs, which in turn controls a number of particle material properties. The anhydrous proton-conducting nature of the prepared NPs allowed us to make a high-performance ion exchange membrane for fuel cell applications, and microfluidic tuning of the NPs allowed us subsequently to tune the fuel cell performance.

Cryogenic focussing, ohmically heated on-column trap

NASA Technical Reports Server (NTRS)

Springston, Stephen R.

1991-01-01

A procedure is described for depositing a conductive layer of gold on the exterior of a fused-silica capillary used in gas chromatography. By subjecting a section of the column near the inlet to a thermal cycle of cryogenic cooling and ohmic heating, volatile samples are concentrated and subsequently injected. The performance of this trap as a chromatographic injector is demonstrated. Several additional applications are suggested and the unique properties of this device are discussed.

PNNI Performance Validation Test Report

NASA Technical Reports Server (NTRS)

Dimond, Robert P.

1999-01-01

Two Private Network-Network Interface (PNNI) neighboring peers were monitored with a protocol analyzer to understand and document how PNNI works with regards to initialization and recovery processes. With the processes documented, pertinent events were found and measured to determine the protocols behavior in several environments, which consisted of congestion and/or delay. Subsequent testing of the protocol in these environments was conducted to determine the protocol's suitability for use in satellite-terrestrial network architectures.

Factors influencing participation in colorectal cancer screening programs in Spain.

PubMed

Vanaclocha-Espi, Mercedes; Ibáñez, Josefa; Molina-Barceló, Ana; Pérez, Elena; Nolasco, Andreu; Font, Rebeca; Pérez-Riquelme, Francisco; de la Vega, Mariola; Arana-Arri, Eunate; Oceja, MªElena; Espinàs, Josep Alfons; Portillo, Isabel; Salas, Dolores

2017-12-01

To analyze the sociodemographic and organizational factors influencing participation in population-based colorectal cancer screening programs (CRCSP) in Spain, a retrospective study was conducted in a cohort of people invited to participate in the first 3 screening rounds of 6 CRCSP from 2000 to 2012. Mixed logistic regression models were used to analyze the relationship between sociodemographic and organizational factors, such as the type of fecal occult blood test (FOBT) used and the FOBT delivery type. The analysis was performed separately in groups (Initial screening-first invitation, Subsequent invitation for previous never-responders, Subsequent invitation-regular, Subsequent invitation-irregular intervals). The results showed that, in the Initial screening-first invitation group, participation was higher in women than in men in all age groups (OR 1.05 in persons aged 50-59years and OR 1.12 in those aged 60-69years). Participation was also higher when no action was required to receive the FOBT kit, independently of the type of screening (Initial screening-first invitation [OR 2.24], Subsequent invitation for previous never-responders [OR 2.14], Subsequent invitation-regular [OR 2.03], Subsequent invitation-irregular intervals [OR 9.38]) and when quantitative rather than qualitative immunological FOBT (FIT) was offered (Initial screening-first invitation [OR 0.70], Subsequent invitation for previous never-responders [OR 0.12], Subsequent invitation-regular [OR 0.20]) or guaiac testing (Initial screening-first invitation [OR 0.81], Subsequent invitation for previous never-responders [OR 0.88], Subsequent invitation-regular [OR 0.73]). In conclusion, the results of this study show that screening participation could be enhanced by inclusion of the FOBT kit with the screening invitation and the use of the quantitative FIT. Copyright © 2017 Elsevier Inc. All rights reserved.

Linking performance decline to choking: players' perceptions in basketball.

PubMed

Fryer, Ashley Marie; Tenenbaum, Gershon; Chow, Graig M

2018-02-01

This study was aimed at examining how basketball players view unexpected performance errors in basketball, and under what conditions they perceive them as choking. Fifty-three basketball players were randomly assigned into 2 groups (game half) to evaluate the linkage between performance decline and choking as a function of game-time, score gap and game half. Within each group, players viewed 8 scenario clips, which featured a different player conducting an error, and subsequently rated the extent of performance decline, the instance of choking and the salience of various performance attributions regarding the error. The analysis revealed that choking was most salient in the 2nd half of the game, but an error was perceived as choking more saliently in the beginning of the 2nd half. This trend was also shown for players' perception of performance decline. Players' ratings of the attributions assigned to errors, however, revealed that during the end of the 2nd half, time pressure and lack of concentration were the causes of errors. Overall, the results provide evidence towards a conceptual framework linking performance decline to the perception of choking, and that errors conducted by players are perceived as choking when there is not a salient reason to suggest its occurrence.

Effects of Three Commercially Available Sports Drinks on Substrate Metabolism and Subsequent Endurance Performance in a Postprandial State.

PubMed

Qin, Lu; Wang, Qi-Rong; Fang, Zi-Long; Wang, Ting; Yu, Ai-Qi; Zhou, Yu-Jie; Zheng, Yi; Yi, Mu-Qing

2017-04-12

Purpose: To examine the effects of commercially available sports beverages with various components on substrate metabolism and subsequent performance. Methods: Two studies were conducted in a double-blinded, counterbalanced manner. Study I was designed to determine the glycemic index, while study II determined the utilization of substrates and subsequent exercise performance. Ten healthy male participants (age 21.70 ± 2.41 years, height 176.60 ± 5.23 cm, weight 66.58 ± 5.38 kg, V̇O 2max 48.1 ± 8.4 mL/kg/min) participated in both study I and study II. Three types of commercially available sports beverage powders were used. The powders consisted primarily of oligosaccharides (low molecular weight carbohydrates, L-CHO), hydrolyzed starch (high molecular weight CHO, H-CHO), and whey protein powder with carbohydrate (CHO-PRO). They were dissolved in purified water with identical CHO concentration of 8% ( w / v ). In study I, each participant underwent two oral glucose tolerance tests (OGTT) and one glycemic response test for each sports drink. In study II, participants cycled for 60 min at 70% V̇O 2max , one hour after consuming a standardized breakfast. One of four prescribed beverages (L-CHO, H-CHO, CHO-PRO, and Placebo control, PLA) was served at 0, 15, 30, 45 min during the exercise. Six hours after the first exercise session, participants came back for a "time to exhaustion test" (TTE). Blood samples were drawn at 0, 30, and 60 min in the first exercise session, while arterial blood gas analysis was conducted at 0, 30, and 60 min in both sessions. Subjective feelings (rating of perceived exertion and abdominal discomfort) were also evaluated every 30 min during exercise. Results: Compared to the reference standardized glucose solution, the glycemic index of the L-CHO beverage was 117.70 ± 14.25, while H-CHO was 105.50 ± 12.82, and CHO-PRO was 67.23 ± 5.88. During the exercise test, the insulin level at 30 and 60 min was significantly lower than baseline following the treatment of L-CHO, H-CHO, and PLA ( p < 0.05). The CHO oxidation rate at 60 min in the first exercise session was significantly higher than that at 60 min in the second exercise session following the L-CHO treatment ( p < 0.05). Time to exhaustion was not significantly different ( p > 0.05). Conclusion: The CHO sports beverage with additional PRO maintains insulin production during endurance cycling at 70% V̇O 2max in the postprandial state. L-CHO sports beverage suppresses fat utilization during the subsequent exercise performance test. The subsequent exercise performance (as evaluated by TTE) was not influenced by the type of CHO or the addition of PRO in the commercially available sports beverages used in the present study.

The 727 airplane target thrust reverser static performance model test for refanned JT8D engines

NASA Technical Reports Server (NTRS)

Chow, C. T. P.; Atkey, E. N.

1974-01-01

The results of a scale model static performance test of target thrust reverser configurations for the Pratt and Whitney Aircraft JT8D-100 series engine are presented. The objective of the test was to select a series of suitable candidate reverser configurations for the subsequent airplane model wind tunnel ingestion and flight controls tests. Test results indicate that adequate reverse thrust performance with compatible engine airflow match is achievable for the selected configurations. Tapering of the lips results in loss of performance and only minimal flow directivity. Door pressure surveys were conducted on a selected number of lip and fence configurations to obtain data to support the design of the thrust reverser system.

Relationships of multitasking, physicians' strain, and performance: an observational study in ward physicians.

PubMed

Weigl, Matthias; Müller, Andreas; Sevdalis, Nick; Angerer, Peter

2013-03-01

Simultaneous task performance ("multitasking") is common in hospital physicians' work and is implicated as a major determinant for enhanced strain and detrimental performance. The aim was to determine the impact of multitasking by hospital physicians on their self reported strain and performance. A prospective observational time-and-motion study in a Community Hospital was conducted. Twenty-seven hospital physicians (surgical and internal specialties) were observed in 40 full-shift observations. Observed physicians reported twice on their self-monitored strain and performance during the observation time. Associations of observed multitasking events and subsequent strain and performance appraisals were calculated. About 21% of the working time physicians were engaged in simultaneous activities. The average time spent in multitasking activities correlated significantly with subsequently reported strain (r = 0.27, P = 0.018). The number of instances of multitasking activities correlated with self-monitored performance to a marginally significant level (r = 0.19, P = 0.098). Physicians who engage in multitasking activities tend to self-report better performance but at the cost of enhanced psychophysical strain. Hence, physicians do not perceive their own multitasking activities as a source for deficient performance, for example, medical errors. Readjustment of workload, improved organization of work for hospital physicians, and training programs to improve physicians' skills in dealing with multiple clinical demands, prioritization, and efficient task allocation may be useful avenues to explore to reduce the potentially negative impact of simultaneous task performance in clinical settings.

Evaluation of a laser scanner for large volume coordinate metrology: a comparison of results before and after factory calibration

NASA Astrophysics Data System (ADS)

Ferrucci, M.; Muralikrishnan, B.; Sawyer, D.; Phillips, S.; Petrov, P.; Yakovlev, Y.; Astrelin, A.; Milligan, S.; Palmateer, J.

2014-10-01

Large volume laser scanners are increasingly being used for a variety of dimensional metrology applications. Methods to evaluate the performance of these scanners are still under development and there are currently no documentary standards available. This paper describes the results of extensive ranging and volumetric performance tests conducted on a large volume laser scanner. The results demonstrated small but clear systematic errors that are explained in the context of a geometric error model for the instrument. The instrument was subsequently returned to the manufacturer for factory calibration. The ranging and volumetric tests were performed again and the results are compared against those obtained prior to the factory calibration.

Investigation of grafted ETFE-based polymer membranes as alternative electrolyte for direct methanol fuel cells

NASA Astrophysics Data System (ADS)

Aricò, A. S.; Baglio, V.; Cretı̀, P.; Di Blasi, A.; Antonucci, V.; Brunea, J.; Chapotot, A.; Bozzi, A.; Schoemans, J.

Low cost ethylene-tetrafluoroethylene (ETFE)-based grafted membranes have been prepared by a process based on electron beam irradiation, subsequent grafting, cross-linking and sulfonation procedure. Two different grafted membranes varying by their grafting and cross-linking levels have been investigated for applications in direct methanol fuel cells (DMFCs) operating between 90 and 130 °C. DMFC assemblies based on these membranes showed cell resistance and performance values comparable to Nafion 117. Stable electrochemical performance was recorded during 1 month of cycled operation. Tailoring of grafting and cross-linking properties allows a significant reduction of methanol cross-over while maintaining suitable conductivity and performance levels.

Using Single-trial EEG to Predict and Analyze Subsequent Memory

PubMed Central

Noh, Eunho; Herzmann, Grit; Curran, Tim; de Sa, Virginia R.

2013-01-01

We show that it is possible to successfully predict subsequent memory performance based on single-trial EEG activity before and during item presentation in the study phase. Two-class classification was conducted to predict subsequently remembered vs. forgotten trials based on subjects’ responses in the recognition phase. The overall accuracy across 18 subjects was 59.6 % by combining pre- and during-stimulus information. The single-trial classification analysis provides a dimensionality reduction method to project the high-dimensional EEG data onto a discriminative space. These projections revealed novel findings in the pre- and during-stimulus period related to levels of encoding. It was observed that the pre-stimulus information (specifically oscillatory activity between 25–35Hz) −300 to 0 ms before stimulus presentation and during-stimulus alpha (7–12 Hz) information between 1000–1400 ms after stimulus onset distinguished between recollection and familiarity while the during-stimulus alpha information and temporal information between 400–800 ms after stimulus onset mapped these two states to similar values. PMID:24064073

A Triblock Copolymer Design Leads to Robust Hybrid Hydrogels for High-Performance Flexible Supercapacitors.

PubMed

Zhang, Guangzhao; Chen, Yunhua; Deng, Yonghong; Wang, Chaoyang

2017-10-18

We report here an intriguing hybrid conductive hydrogel as electrode for high-performance flexible supercapacitor. The key is using a rationally designed water-soluble ABA triblock copolymer (termed as IAOAI) containing a central poly(ethylene oxide) block (A) and terminal poly(acrylamide) (PAAm) block with aniline moieties randomly incorporated (B), which was synthesized by reversible additional fragment transfer polymerization. The subsequent copolymerization of aniline monomers with the terminated aniline moieties on the IAOAI polymer generates a three-dimensional cross-linking hybrid network. The hybrid hydrogel electrode demonstrates robust mechanical flexibility, remarkable electrochemical capacitance (919 F/g), and cyclic stability (90% capacitance retention after 1000 cycles). Moreover, the flexible supercapacitor based on this hybrid hydrogel electrode presents a large specific capacitance (187 F/g), superior to most reported conductive hydrogel-based supercapacitors. With the demonstrated additional favorable cyclic stability and excellent capacitive and rate performance, this hybrid hydrogel-based supercapacitor holds great promise for flexible energy-storage device.

Failure analysis of stainless steel femur fixation plate.

PubMed

Hussain, P B; Mohammad, M

2004-05-01

Failure analysis was performed to investigate the failure of the femur fixation plate which was previously fixed on the femur of a girl. Radiography, metallography, fractography and mechanical testing were conducted in this study. The results show that the failure was due to the formation of notches on the femur plate. These notches act as stress raisers from where the cracks start to propagate. Finally fracture occurred on the femur plate and subsequently, the plate failed.

RSRM Nozzle Anomalous Throat Erosion Investigation Overview

NASA Technical Reports Server (NTRS)

Clinton, R. G., Jr.; Wendel, Gary M.

1998-01-01

In September, 1996, anomalous pocketing erosion was observed in the aft end of the throat ring of the nozzle of one of the reusable solid rocket motors (RSRM 56B) used on NASA's space transportation system (STS) mission 79. The RSRM throat ring is constructed of bias tape-wrapped carbon cloth/ phenolic (CCP) ablative material. A comprehensive investigation revealed necessary and sufficient conditions for occurrence of the pocketing event and provided rationale that the solid rocket motors for the subsequent mission, STS-80, were safe to fly. The nozzles of both of these motors also exhibited anomalous erosion similar to, but less extensive than that observed on STS-79. Subsequent to this flight, the investigation to identify both the specific causes and the corrective actions for elimination of the necessary and sufficient conditions for the pocketing erosion was intensified. A detailed fault tree approach was utilized to examine potential material and process contributors to the anomalous performance. The investigation involved extensive constituent and component material property testing, pedigree assessments, supplier audits, process audits, full scale processing test article fabrication and evaluation, thermal and thermostructural analyses, nondestructive evaluation, and material performance tests conducted using hot fire simulation in laboratory test beds and subscale and full scale solid rocket motor static test firings. This presentation will provide an over-view of the observed anomalous nozzle erosion and the comprehensive, fault-tree based investigation conducted to resolve this issue.

Liquid rocket booster study. Volume 2, book 4, appendices 6-8: Reports of Rocketdyne, Pratt and Whitney, and TRW

NASA Technical Reports Server (NTRS)

1988-01-01

For the pressure fed engines, detailed trade studies were conducted defining engine features such as thrust vector control methods, thrust chamber construction, etc. This was followed by engine design layouts and booster propulsion configuration layouts. For the pump fed engines parametric performance and weight data was generated for both O2/H2 and O2/RP-1 engines. Subsequent studies resulted in the selection of both LOX/RP-1 and O2/H2 propellants for the pump fed engines. More detailed analysis of the selected LOX/RP-1 and O2/H2 engines was conducted during the final phase of the study.

Evaluation of MARC for the analysis of rotating composite blades

NASA Technical Reports Server (NTRS)

Bartos, Karen F.; Ernst, Michael A.

1993-01-01

The suitability of the MARC code for the analysis of rotating composite blades was evaluated using a four-task process. A nonlinear displacement analysis and subsequent eigenvalue analysis were performed on a rotating spring mass system to ensure that displacement-dependent centrifugal forces were accounted for in the eigenvalue analysis. Normal modes analyses were conducted on isotropic plates with various degrees of twist to evaluate MARC's ability to handle blade twist. Normal modes analyses were conducted on flat composite plates to validate the newly developed coupled COBSTRAN-MARC methodology. Finally, normal modes analyses were conducted on four composite propfan blades that were designed, analyzed, and fabricated at NASA Lewis Research Center. Results were compared with experimental data. The research documented herein presents MARC as a viable tool for the analysis of rotating composite blades.

Evaluation of MARC for the analysis of rotating composite blades

NASA Astrophysics Data System (ADS)

Bartos, Karen F.; Ernst, Michael A.

1993-03-01

The suitability of the MARC code for the analysis of rotating composite blades was evaluated using a four-task process. A nonlinear displacement analysis and subsequent eigenvalue analysis were performed on a rotating spring mass system to ensure that displacement-dependent centrifugal forces were accounted for in the eigenvalue analysis. Normal modes analyses were conducted on isotropic plates with various degrees of twist to evaluate MARC's ability to handle blade twist. Normal modes analyses were conducted on flat composite plates to validate the newly developed coupled COBSTRAN-MARC methodology. Finally, normal modes analyses were conducted on four composite propfan blades that were designed, analyzed, and fabricated at NASA Lewis Research Center. Results were compared with experimental data. The research documented herein presents MARC as a viable tool for the analysis of rotating composite blades.

Thermal conduction study of warm dense aluminum by proton differential heating

NASA Astrophysics Data System (ADS)

Ping, Y.; Kemp, G.; McKelvey, A.; Fernandez-Panella, A.; Shepherd, R.; Collins, G.; Sio, H.; King, J.; Freeman, R.; Hua, R.; McGuffey, C.; Kim, J.; Beg, F.

2016-10-01

A differential heating platform has been developed for thermal conduction study (Ping et al. PoP 2015), where a temperature gradient is induced and subsequent heat flow is probed by time-resolved diagnostics. An experiment using proton differential heating has been carried out at Titan laser for Au/Al targets. Two single-shot time-resolved diagnostics are employed, SOP (streaked optical pyrometry) for surface temperature and FDI (Fourier Domain Interferometry) for surface expansion. Hydrodynamic simulations show that after 15ps, absorption in underdense plasma needs to be taken into account to correctly interpret SOP data. Comparison between simulations with different thermal conductivity models and a set of data with varying target thickness will be presented. This work was performed under DOE contract DE-AC52-07NA27344 with support from OFES Early Career program and LLNL LDRD program.

Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silvas, A. J.

2014-03-03

This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2013 and includes inspection and repair activities completed at the following CAUs: • CAU 400: Bomblet Pit and Five Points Landfill (TTR) • CAU 407: Roller Coaster RadSafe Area (TTR) • CAU 424: Area 3 Landfill Complexes (TTR) • CAU 453: Area 9 UXO Landfill (TTR) • CAU 487: Thunderwell Site (TTR) Inspections were conducted according to the post-closure plans in the approved Closure Reports and subsequent correspondence withmore » the Nevada Division of Environmental Protection. The post-closure inspection plans and subsequent correspondence modifying the requirements for each CAU are included in Appendix B. The inspection checklists are included in Appendix C. Field notes are included in Appendix D. Photographs taken during inspections are included in Appendix E. The annual post-closure inspections were conducted on May 14, 2013. Maintenance was performed at CAU 400, CAU 424, and CAU 453. At CAU 400, animal burrows were backfilled. At CAU 424, erosion repairs were completed at Landfill Cell A3-3, subsidence was repaired at Landfill Cell A3-4, and additional lava rock was placed in high-traffic areas to mark the locations of the surface grade monuments at Landfill Cell A3-3 and Landfill Cell A3-8. At CAU 453, two areas of subsidence were repaired and animal burrows were backfilled. Vegetation monitoring was performed at the CAU 400 Five Points Landfill and CAU 407 in June 2013. The vegetation monitoring report is included in Appendix F.« less

Simulator training and non-technical factors improve laparoscopic performance among OBGYN trainees.

PubMed

Ahlborg, Liv; Hedman, Leif; Nisell, Henry; Felländer-Tsai, Li; Enochsson, Lars

2013-10-01

To investigate how simulator training and non-technical factors affect laparoscopic performance among residents in obstetrics and gynecology. In this prospective study, trainees were randomized into three groups. The first group was allocated to proficiency-based training in the LapSimGyn(®) virtual reality simulator. The second group received additional structured mentorship during subsequent laparoscopies. The third group served as control group. At baseline an operation was performed and visuospatial ability, flow and self-efficacy were assessed. All groups subsequently performed three tubal occlusions. Self-efficacy and flow were assessed before and/or after each operation. Simulator training was conducted at the Center for Advanced Medical Simulation and Training, Karolinska University Hospital. Sterilizations were performed at each trainee's home clinic. Twenty-eight trainees/residents from 21 hospitals in Sweden were included. Visuospatial ability was tested by the Mental Rotation Test-A. Flow and self-efficacy were assessed by validated scales and questionnaires. Laparoscopic performance was measured as the duration of surgery. Visuospatial ability, self-efficacy and flow were correlated to the laparoscopic performance using Spearman's correlations. Differences between groups were analyzed by the Mann-Whitney U-test. No differences across groups were detected at baseline. Self-efficacy scores before and flow scores after the third operation were significantly higher in the trained groups. Duration of surgery was significantly shorter in the trained groups. Flow and self-efficacy correlate positively with laparoscopic performance. Simulator training and non-technical factors appear to improve the laparoscopic performance among trainees/residents in obstetrics and gynecology. © 2013 Nordic Federation of Societies of Obstetrics and Gynecology.

FY95 limited energy study. Area B nitric acid production facilities, Holston Army Ammunition Plant, Kingsport, Tennessee. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-04-02

In June 1995, Affiliated Engineers SE, Inc. (AESE) was retained by the Mobile District U.S. Army Corps of Engineers to perform a Limited Energy Study for Holston Army Ammunition Plant, Kingsport, Tennessee. The field survey of existing conditions was completed in July 1995. The results of this field survey were subsequently tabulated and used to generate single line process flow diagrams on Autocad. A subsequent one day field survey was conducted in August 1995. This report summarizes the results obtained from field investigation and the analysis of various alternative Energy Conservation Opportunities (ECO`s). ECO`s were analyzed for suitability for themore » Energy Conservation Investment Program (ECIP) using the government`s software package called Life Cycle Cost in Design (LCCID).« less

Blast optimization for improved dragline productivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphreys, M.; Baldwin, G.

1994-12-31

A project aimed at blast optimization for large open pit coal mines is utilizing blast monitoring and analysis techniques, advanced dragline monitoring equipment, and blast simulation software, to assess the major controlling factors affecting both blast performance and subsequent dragline productivity. This has involved collaborative work between the explosives supplier, mine operator, monitoring equipment manufacturer, and a mining research organization. The results from trial blasts and subsequently monitored dragline production have yielded promising results and continuing studies are being conducted as part of a blast optimization program. It should be stressed that the optimization of blasting practices for improved draglinemore » productivity is a site specific task, achieved through controlled and closely monitored procedures. The benefits achieved at one location can not be simply transferred to another minesite unless similar improvement strategies are first implemented.« less

Advanced Multifunctional MMOD Shield: Radiation Shielding Assessment

NASA Technical Reports Server (NTRS)

Rojdev, Kristina; Christiansen, Eric

2013-01-01

As NASA is looking to explore further into deep space, multifunctional materials are a necessity for decreasing complexity and mass. One area where multifunctional materials could be extremely beneficial is in the micrometeoroid orbital debris (MMOD) shield. A typical MMOD shield on the International Space Station (ISS) is a stuffed whipple shield consisting of multiple layers. One of those layers is the thermal blanket, or multi-layer insulation (MLI). Increasing the MMOD effectiveness of MLI blankets, while still preserving their thermal capabilities, could allow for a less massive MMOD shield. Thus, a study was conducted to evaluate a concept MLI blanket for an MMOD shield. In conjunction, this MLI blanket and the subsequent MMOD shield was also evaluated for its radiation shielding effectiveness towards protecting crew. The overall MMOD shielding system using the concept MLI blanket proved to only have a marginal increase in the radiation mitigating properties. Therefore, subsequent analysis was performed on various conceptual MMOD shields to determine the combination of materials that may prove superior for radiation mitigating purposes. The following paper outlines the evaluations performed and discusses the results and conclusions of this evaluation for radiation shielding effectiveness.

Semantic and Syntactic Associations During Word Search Modulate the Relationship Between Attention and Subsequent Memory.

PubMed

Zhou, Wei; Mo, Fei; Zhang, Yunhong; Ding, Jinhong

2017-01-01

Two experiments were conducted to investigate how linguistic information influences attention allocation in visual search and memory for words. In Experiment 1, participants searched for the synonym of a cue word among five words. The distractors included one antonym and three unrelated words. In Experiment 2, participants were asked to judge whether the five words presented on the screen comprise a valid sentence. The relationships among words were sentential, semantically related or unrelated. A memory recognition task followed. Results in both experiments showed that linguistically related words produced better memory performance. We also found that there were significant interactions between linguistic relation conditions and memorization on eye-movement measures, indicating that good memory for words relied on frequent and long fixations during search in the unrelated condition but to a much lesser extent in linguistically related conditions. We conclude that semantic and syntactic associations attenuate the link between overt attention allocation and subsequent memory performance, suggesting that linguistic relatedness can somewhat compensate for a relative lack of attention during word search.

Examination of the relation between an assessment of skills and performance on auditory-visual conditional discriminations for children with autism spectrum disorder.

PubMed

Kodak, Tiffany; Clements, Andrea; Paden, Amber R; LeBlanc, Brittany; Mintz, Joslyn; Toussaint, Karen A

2015-01-01

The current investigation evaluated repertoires that may be related to performance on auditory-to-visual conditional discrimination training with 9 students who had been diagnosed with autism spectrum disorder. The skills included in the assessment were matching, imitation, scanning, an auditory discrimination, and a visual discrimination. The results of the skills assessment showed that 4 participants failed to demonstrate mastery of at least 1 of the skills. We compared the outcomes of the assessment to the results of auditory-visual conditional discrimination training and found that training outcomes were related to the assessment outcomes for 7 of the 9 participants. One participant who did not demonstrate mastery of all assessment skills subsequently learned several conditional discriminations when blocked training trials were conducted. Another participant who did not demonstrate mastery of the auditory discrimination skill subsequently acquired conditional discriminations in 1 of the training conditions. We discuss the implications of the assessment for practice and suggest additional areas of research on this topic. © Society for the Experimental Analysis of Behavior.

40 CFR 761.386 - Required experimental conditions for the validation study and subsequent use during decontamination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the validation study and subsequent use during decontamination. 761.386 Section 761.386 Protection of... experimental conditions for the validation study and subsequent use during decontamination. The following experimental conditions apply for any solvent: (a) Temperature and pressure. Conduct the validation study and...

40 CFR 761.386 - Required experimental conditions for the validation study and subsequent use during decontamination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the validation study and subsequent use during decontamination. 761.386 Section 761.386 Protection of... experimental conditions for the validation study and subsequent use during decontamination. The following experimental conditions apply for any solvent: (a) Temperature and pressure. Conduct the validation study and...

40 CFR 761.386 - Required experimental conditions for the validation study and subsequent use during decontamination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the validation study and subsequent use during decontamination. 761.386 Section 761.386 Protection of... experimental conditions for the validation study and subsequent use during decontamination. The following experimental conditions apply for any solvent: (a) Temperature and pressure. Conduct the validation study and...

The long-term impact of community mobilisation through participatory women's groups on women's agency in the household: A follow-up study to the Makwanpur trial

PubMed Central

Skordis-Worrall, Jolene; Manandhar, Dharma S.; Strachan, Daniel; Morrison, Joanna; Saville, Naomi; Osrin, David; Tumbahangphe, Kirti M.; Costello, Anthony; Heys, Michelle

2018-01-01

Women’s groups practicing participatory learning and action (PLA) in rural areas have been shown to improve maternal and newborn survival in low-income countries, but the pathways from intervention to impact remain unclear. We assessed the long-term impact of a PLA intervention in rural Nepal on women’s agency in the household. In 2014, we conducted a follow-up study to a cluster randomised controlled trial on the impact of PLA women’s groups from 2001–2003. Agency was measured using the Relative Autonomy Index (RAI) and its subdomains. Multi-level regression analyses were performed adjusting for baseline socio-demographic characteristics. We additionally adjusted for potential exposure to subsequent PLA groups based on women’s pregnancy status and conduct of PLA groups in areas of residence. Sensitivity analyses were performed using two alternative measures of agency. We analysed outcomes for 4030 mothers (66% of the cohort) who survived and were recruited to follow-up at mean age 39.6 years. Across a wide range of model specifications, we found no association between exposure to the original PLA intervention with women’s agency in the household approximately 11.5 years later. Subsequent exposure to PLA groups was not associated with greater agency in the household at follow-up, but some specifications found evidence for reduced agency. Household agency may be a prerequisite for actualising the benefits of PLA groups rather than a consequence. PMID:29758071

Icing Simulation Research Supporting the Ice-Accretion Testing of Large-Scale Swept-Wing Models

NASA Technical Reports Server (NTRS)

Yadlin, Yoram; Monnig, Jaime T.; Malone, Adam M.; Paul, Bernard P.

2018-01-01

The work summarized in this report is a continuation of NASA's Large-Scale, Swept-Wing Test Articles Fabrication; Research and Test Support for NASA IRT contract (NNC10BA05 -NNC14TA36T) performed by Boeing under the NASA Research and Technology for Aerospace Propulsion Systems (RTAPS) contract. In the study conducted under RTAPS, a series of icing tests in the Icing Research Tunnel (IRT) have been conducted to characterize ice formations on large-scale swept wings representative of modern commercial transport airplanes. The outcome of that campaign was a large database of ice-accretion geometries that can be used for subsequent aerodynamic evaluation in other experimental facilities and for validation of ice-accretion prediction codes.

Analogs and the BHP Risk Reduction Strategy for Future Spaceflight Missions

NASA Technical Reports Server (NTRS)

Whitmire, Sandra; Leveton, Lauren

2011-01-01

In preparation for future exploration missions to distant destinations (e.g., Moon, Near Earth Objects (NEO), and Mars), the NASA Human Research Program s (HRP) Behavioral Health and Performance Element (BHP) conducts and supports research to address four human health risks: Risk of Behavioral Conditions; Risk of Psychiatric Conditions; Risk of Performance Decrements Due to Inadequate Cooperation, Coordination, Communication, and Psychosocial Adaptation within a Team; and Risk of Performance Errors due to Sleep Loss, Fatigue, Circadian Desynchronization, and Work Overload (HRP Science Management Plan, 2008). BHP Research, in collaboration with internal and external research investigators, as well as subject matter experts within NASA operations including flight surgeons, astronauts, and mission planners and others within the Mission Operations Directorate (MOD), identifies knowledge and technology gaps within each Risk. BHP Research subsequently manages and conducts research tasks to address and close the gaps, either through risk assessment and quantification, or the development of countermeasures and monitoring technologies. The resulting deliverables, in many instances, also support current Medical Operations and/or Mission Operations for the International Space Station (ISS).

Auto-Thermal Reforming of Jet-A Fuel over Commercial Monolith Catalysts: MicroReactor Evaluation and Screening Test Results

NASA Technical Reports Server (NTRS)

Yen, Judy C. H.; Tomsik, Thomas M.

2004-01-01

This paper describes the results of a series of catalyst screening tests conducted with Jet-A fuel under auto-thermal reforming (ATR) process conditions at the research laboratories of SOFCo-EFS Holdings LLC under Glenn Research Center Contract. The primary objective is to identify best available catalysts for future testing at the NASA GRC 10-kW(sub e) reformer test facility. The new GRC reformer-injector test rig construction is due to complete by March 2004. Six commercially available monolithic catalyst materials were initially selected by the NASA/SOFCo team for evaluation and bench scale screening in an existing 0.05 kW(sub e) microreactor test apparatus. The catalyst screening tests performed lasted 70 to 100 hours in duration in order to allow comparison between the different samples over a defined range of ATR process conditions. Aging tests were subsequently performed with the top two ranked catalysts as a more representative evaluation of performance in a commercial aerospace application. The two catalyst aging tests conducted lasting for approximately 600 hours and 1000 hours, respectively.

An in situ generated carbon as integrated conductive additive for hierarchical negative plate of lead-acid battery

NASA Astrophysics Data System (ADS)

Saravanan, M.; Ganesan, M.; Ambalavanan, S.

2014-04-01

In this work, we report an in situ generated carbon from sugar as additive in the Negative Active Mass (NAM) which enhances the charge-discharge characteristics of the lead-acid cells. In situ formed sugar derived carbon (SDC) with leady oxide (LO) provides a conductive network and excellent protection against NAM irreversible lead sulfation. The effect of SDC and carbon black (CB) added negative plates are characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), galvanostatic charge-discharge, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. The results show that subtle changes in the addition of carbon to NAM led to subsequent changes on the performance during partial-state-of-charge (PSoC) operations in lead-acid cells. Furthermore, SDC added cells exhibit remarkable improvement in the rate capability, active material utilization, cycle performance and charge acceptance compared to that of the conventional CB added cells. The impact of SDC with LO at various synthesis conditions on the electrochemical performance of the negative plate is studied systematically.

The Associations Between Clerkship Objective Structured Clinical Examination (OSCE) Grades and Subsequent Performance.

PubMed

Dong, Ting; Zahn, Christopher; Saguil, Aaron; Swygert, Kimberly A; Yoon, Michelle; Servey, Jessica; Durning, Steven

2017-01-01

Construct: We investigated the extent of the associations between medical students' clinical competency measured by performance in Objective Structured Clinical Examinations (OSCE) during Obstetrics/Gynecology and Family Medicine clerkships and later performance in both undergraduate and graduate medical education. There is a relative dearth of studies on the correlations between undergraduate OSCE scores and future exam performance within either undergraduate or graduate medical education and almost none on linking these simulated encounters to eventual patient care. Of the research studies that do correlate clerkship OSCE scores with future performance, these often have a small sample size and/or include only 1 clerkship. Students in USU graduating classes of 2007 through 2011 participated in the study. We investigated correlations between clerkship OSCE grades with United States Medical Licensing Examination Step 2 Clinical Knowledge, Clinical Skills, and Step 3 Exams scores as well as Postgraduate Year 1 program director's evaluation scores on Medical Expertise and Professionalism. We also conducted contingency table analysis to examine the associations between poor performance on clerkship OSCEs with failing Step 3 and receiving poor program director ratings. The correlation coefficients were weak between the clerkship OSCE grades and the outcomes. The strongest correlations existed between the clerkship OSCE grades and the Step 2 CS Integrated Clinical Encounter component score, Step 2 Clinical Skills, and Step 3 scores. Contingency table associations between poor performances on both clerkships OSCEs and poor Postgraduate Year 1 Program Director ratings were significant. The results of this study provide additional but limited validity evidence for the use of OSCEs during clinical clerkships given their associations with subsequent performance measures.

Delayed, but not immediate, feedback after multiple-choice questions increases performance on a subsequent short-answer, but not multiple-choice, exam: evidence for the dual-process theory of memory.

PubMed

Sinha, Neha; Glass, Arnold Lewis

2015-01-01

Three experiments, two performed in the laboratory and one embedded in a college psychology lecture course, investigated the effects of immediate versus delayed feedback following a multiple-choice exam on subsequent short answer and multiple-choice exams. Performance on the subsequent multiple-choice exam was not affected by the timing of the feedback on the prior exam; however, performance on the subsequent short answer exam was better following delayed than following immediate feedback. This was true regardless of the order in which immediate versus delayed feedback was given. Furthermore, delayed feedback only had a greater effect than immediate feedback on subsequent short answer performance following correct, confident responses on the prior exam. These results indicate that delayed feedback cues a student's prior response and increases subsequent recollection of that response. The practical implication is that delayed feedback is better than immediate feedback during academic testing.

A simplified design of the staggered herringbone micromixer for practical applications

PubMed Central

Du, Yan; Zhang, Zhiyi; Yim, ChaeHo; Lin, Min; Cao, Xudong

2010-01-01

We demonstrated a simple method for the device design of a staggered herringbone micromixer (SHM) using numerical simulation. By correlating the simulated concentrations with channel length, we obtained a series of concentration versus channel length profiles, and used mixing completion length Lm as the only parameter to evaluate the performance of device structure on mixing. Fluorescence quenching experiments were subsequently conducted to verify the optimized SHM structure for a specific application. Good agreement was found between the optimization and the experimental data. Since Lm is straightforward, easily defined and calculated parameter for characterization of mixing performance, this method for designing micromixers is simple and effective for practical applications. PMID:20697584

A simplified design of the staggered herringbone micromixer for practical applications.

PubMed

Du, Yan; Zhang, Zhiyi; Yim, Chaeho; Lin, Min; Cao, Xudong

2010-05-07

We demonstrated a simple method for the device design of a staggered herringbone micromixer (SHM) using numerical simulation. By correlating the simulated concentrations with channel length, we obtained a series of concentration versus channel length profiles, and used mixing completion length L(m) as the only parameter to evaluate the performance of device structure on mixing. Fluorescence quenching experiments were subsequently conducted to verify the optimized SHM structure for a specific application. Good agreement was found between the optimization and the experimental data. Since L(m) is straightforward, easily defined and calculated parameter for characterization of mixing performance, this method for designing micromixers is simple and effective for practical applications.

Dynamic facial expression recognition based on geometric and texture features

NASA Astrophysics Data System (ADS)

Li, Ming; Wang, Zengfu

2018-04-01

Recently, dynamic facial expression recognition in videos has attracted growing attention. In this paper, we propose a novel dynamic facial expression recognition method by using geometric and texture features. In our system, the facial landmark movements and texture variations upon pairwise images are used to perform the dynamic facial expression recognition tasks. For one facial expression sequence, pairwise images are created between the first frame and each of its subsequent frames. Integration of both geometric and texture features further enhances the representation of the facial expressions. Finally, Support Vector Machine is used for facial expression recognition. Experiments conducted on the extended Cohn-Kanade database show that our proposed method can achieve a competitive performance with other methods.

A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Subsequent to the design review, a series of tests was conducted on simulated modules to demonstrate that all environmental specifications (wind loading, hailstone impact, thermal cycling, and humidity cycling) are satisfied by the design. All tests, except hailstone impact, were successfully completed. The assembly sequence was simplified by virtue of eliminating the frame components and assembly steps. Performance was improved by reducing the module edge border required to accommodate the frame of the preliminary design module. An ultrasonic rolling spot bonding technique was selected for use in the machine to perform the aluminum interconnect to cell metallization electrical joints required in the MEPSDU module configuration. This selection was based on extensive experimental tests and economic analyses.

Evaluation of a self-instructional manual for conducting discrete-trials teaching with children with autism.

PubMed

Thiessen, Carly; Fazzio, Daniela; Arnal, Lindsay; Martin, Garry L; Yu, C T; Keilback, Lukas

2009-05-01

Discrete-trials teaching (DTT) is commonly used to implement applied behavior analysis treatment for children with autism. The authors investigated a revised self-instructional manual for teaching university students to implement a 21-component DTT procedure to teach three tasks to confederates role-playing children with autism. Also, as a motivational contingency, for each DTT session in which a student scored at or above 90% accuracy, they received US$10. After an average of 4.5 hr to master the training manual, students' average DTT performance improved from 52% in baseline to 88% while teaching a confederate. Students averaged 77% DTT performance during subsequent generalization sessions with a child with autism.

DOE Office of Scientific and Technical Information (OSTI.GOV)

N.D. Francis

The objective of this calculation is to develop a time dependent in-drift effective thermal conductivity parameter that will approximate heat conduction, thermal radiation, and natural convection heat transfer using a single mode of heat transfer (heat conduction). In order to reduce the physical and numerical complexity of the heat transfer processes that occur (and must be modeled) as a result of the emplacement of heat generating wastes, a single parameter will be developed that approximates all forms of heat transfer from the waste package surface to the drift wall (or from one surface exchanging heat with another). Subsequently, with thismore » single parameter, one heat transfer mechanism (e.g., conduction heat transfer) can be used in the models. The resulting parameter is to be used as input in the drift-scale process-level models applied in total system performance assessments for the site recommendation (TSPA-SR). The format of this parameter will be a time-dependent table for direct input into the thermal-hydrologic (TH) and the thermal-hydrologic-chemical (THC) models.« less

Shuttle orbiter flash evaporator operational flight test performance

NASA Technical Reports Server (NTRS)

Nason, J. R.; Behrend, A. F., Jr.

1982-01-01

The Flash evaporator System (FES is part of the Shuttle Orbiter Active Thermal Control Subsystem. The FES provides total heat rejection for the vehicle Freon Coolant Loops during ascent and entry and supplementary heat rejection during orbital mission phases. This paper reviews the performance of the FES during the first two Shuttle orbital missions (STS-1 and STS-2). A comparison of actual mission performance against design requirements is presented. Mission profiles (including Freon inlet temperature and feedwater pressure transients), control temperature, and heat load variations are evaluated. Anomalies that occurred during STS-2 are discussed along with the procedures conducted, both in-flight and post-flight, to isolate the causes. Finally, the causes of the anomalies and resulting corrective action taken for STS-3 and subsequent flights are presented.

Computational multiobjective topology optimization of silicon anode structures for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Mitchell, Sarah L.; Ortiz, Michael

2016-09-01

This study utilizes computational topology optimization methods for the systematic design of optimal multifunctional silicon anode structures for lithium-ion batteries. In order to develop next generation high performance lithium-ion batteries, key design challenges relating to the silicon anode structure must be addressed, namely the lithiation-induced mechanical degradation and the low intrinsic electrical conductivity of silicon. As such this work considers two design objectives, the first being minimum compliance under design dependent volume expansion, and the second maximum electrical conduction through the structure, both of which are subject to a constraint on material volume. Density-based topology optimization methods are employed in conjunction with regularization techniques, a continuation scheme, and mathematical programming methods. The objectives are first considered individually, during which the influence of the minimum structural feature size and prescribed volume fraction are investigated. The methodology is subsequently extended to a bi-objective formulation to simultaneously address both the structural and conduction design criteria. The weighted sum method is used to derive the Pareto fronts, which demonstrate a clear trade-off between the competing design objectives. A rigid frame structure was found to be an excellent compromise between the structural and conduction design criteria, providing both the required structural rigidity and direct conduction pathways. The developments and results presented in this work provide a foundation for the informed design and development of silicon anode structures for high performance lithium-ion batteries.

Highly Conductive Graphene/Ag Hybrid Fibers for Flexible Fiber-Type Transistors.

PubMed

Yoon, Sang Su; Lee, Kang Eun; Cha, Hwa-Jin; Seong, Dong Gi; Um, Moon-Kwang; Byun, Joon-Hyung; Oh, Youngseok; Oh, Joon Hak; Lee, Wonoh; Lee, Jea Uk

2015-11-09

Mechanically robust, flexible, and electrically conductive textiles are highly suitable for use in wearable electronic applications. In this study, highly conductive and flexible graphene/Ag hybrid fibers were prepared and used as electrodes for planar and fiber-type transistors. The graphene/Ag hybrid fibers were fabricated by the wet-spinning/drawing of giant graphene oxide and subsequent functionalization with Ag nanoparticles. The graphene/Ag hybrid fibers exhibited record-high electrical conductivity of up to 15,800 S cm(-1). As the graphene/Ag hybrid fibers can be easily cut and placed onto flexible substrates by simply gluing or stitching, ion gel-gated planar transistors were fabricated by using the hybrid fibers as source, drain, and gate electrodes. Finally, fiber-type transistors were constructed by embedding the graphene/Ag hybrid fiber electrodes onto conventional polyurethane monofilaments, which exhibited excellent flexibility (highly bendable and rollable properties), high electrical performance (μh = 15.6 cm(2) V(-1) s(-1), Ion/Ioff > 10(4)), and outstanding device performance stability (stable after 1,000 cycles of bending tests and being exposed for 30 days to ambient conditions). We believe that our simple methods for the fabrication of graphene/Ag hybrid fiber electrodes for use in fiber-type transistors can potentially be applied to the development all-organic wearable devices.

Highly Conductive Graphene/Ag Hybrid Fibers for Flexible Fiber-Type Transistors

PubMed Central

Yoon, Sang Su; Lee, Kang Eun; Cha, Hwa-Jin; Seong, Dong Gi; Um, Moon-Kwang; Byun, Joon-Hyung; Oh, Youngseok; Oh, Joon Hak; Lee, Wonoh; Lee, Jea Uk

2015-01-01

Mechanically robust, flexible, and electrically conductive textiles are highly suitable for use in wearable electronic applications. In this study, highly conductive and flexible graphene/Ag hybrid fibers were prepared and used as electrodes for planar and fiber-type transistors. The graphene/Ag hybrid fibers were fabricated by the wet-spinning/drawing of giant graphene oxide and subsequent functionalization with Ag nanoparticles. The graphene/Ag hybrid fibers exhibited record-high electrical conductivity of up to 15,800 S cm−1. As the graphene/Ag hybrid fibers can be easily cut and placed onto flexible substrates by simply gluing or stitching, ion gel-gated planar transistors were fabricated by using the hybrid fibers as source, drain, and gate electrodes. Finally, fiber-type transistors were constructed by embedding the graphene/Ag hybrid fiber electrodes onto conventional polyurethane monofilaments, which exhibited excellent flexibility (highly bendable and rollable properties), high electrical performance (μh = 15.6 cm2 V−1 s−1, Ion/Ioff > 104), and outstanding device performance stability (stable after 1,000 cycles of bending tests and being exposed for 30 days to ambient conditions). We believe that our simple methods for the fabrication of graphene/Ag hybrid fiber electrodes for use in fiber-type transistors can potentially be applied to the development all-organic wearable devices. PMID:26549711

Thermal Conductivity of Polymer Copoly(Ethylene Vinyl Acetate)/Nano-Filler Blends

NASA Technical Reports Server (NTRS)

Ghose, S.; Watson, K. A.; Working, D. C.; Connell, J. W.; Smith, J. G., Jr.; Lin, Y.; Sun, Y. P.

2007-01-01

The development of flexible, thermally conductive fabrics and plastic tubes for the Liquid Cooling and Ventilation Garment (LCVG) are needed to reduce weight and improve the mobility, comfort, and performance of future spacesuits. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As a continuation of our work on the improvement of thermal conductivity (TC) of polymeric materials, nanocomposites were prepared from copoly(ethylene vinyl acetate), trade name Elvax 260 , metallized carbon nanofibers (CNFs), nickel (Ni) nanostrands, boron nitride both alone and as mixtures with aluminum powder. The nanocomposites were prepared by melt mixing at various loading levels and subsequently fabricated into several material forms (i.e., ribbons, tubes, and compression molded plaques) for analysis. Ribbons and tubes were extruded to form samples in which the nanoparticles were aligned in the direction of flow. The degree of dispersion and alignment of the nanoparticles were investigated using high-resolution scanning electron microscopy. Tensile properties of the aligned samples were determined at room temperature. TC measurements were performed using a laser flash (Nanoflash ) technique. The TC of the samples was measured in both the direction of alignment as well as transverse. Tubing of comparable dimensions to that used in the LCVG was extruded from select compositions and the thermal conductivities of the tubes measured.

[Which invasive diagnostic procedure should we use for twin pregnancies: chorionic villous sampling or amniocentesis?].

PubMed

Gallot, D; Vélémir, L; Delabaere, A; Accoceberry, M; Niro, J; Vendittelli, F; Laurichesse-Delmas, H; Jacquetin, B; Lémery, D

2009-12-01

To describe invasive diagnostic procedures (amniocentesis/choriocentesis) and subsequent risks in twin pregnancies. PubMed and Cochrane database investigations were conducted using following key words: twin gestation, amniocentesis, chorionic villous sampling, karyotype. Guidelines for twin management edicted by different societies were reviewed. Risk of pregnancy loss after invasive diagnostic procedure in twin pregnancies seems to be slightly higher to singletons, i.e about 1.5-2% after mid-trimester amniocentesis and about 2% after first trimester choriocentesis. Dual sampling is not always mandatory but can be performed on parent's request. Specific risks are associated with twins: redundant sampling, permutation or misidentification of affected twin in case of discordant status. Procedures should be performed by highly-skilled operators under permanent ultrasound-guidance. A scheme describing placental locations and funicular insertions appears to be useful for correct identification. If foeticide can be anticipated, diagnostic procedure and foeticide should be performed by the same operators. For amniocentesis, one or two needles can be used except for cases with infectious disease (two needles and two separate insertions required). For choriocentesis, sampling should be performed close to funicular insertions. First-trimester choriocentesis makes earlier diagnosis and earlier foeticide possible compared with mid-trimester amniocentesis. Both techniques require highly-skilled operators to reduce subsequent risks in the context of twin pregnancies. Copyright © 2009 Elsevier Masson SAS. All rights reserved.

CCQM K6.2 determination of total cholesterol in human serum

NASA Astrophysics Data System (ADS)

Wise, Stephen A.; Phinney, Karen W.; Duewer, David L.; Sniegoski, Lorna T.; Welch, Michael J.; Pabello, Guiomar; Avila Caldero, Marco A.; Qinde, Liu; Kooi, Lee Tong; Rego, Eliane; Garrido, Bruno; Allegri, Gabriella; de La Cruz, Marcia; Barrabin, Juliana; Puglisi, Celia; Lopez, Eduardo; Lee, Hwashim; Kim, Byungjoo; Delatour, Vincent; Heuillet, Maud; Nammoonnoy, Jintana; Ceyhan Gören, Ahmet; Bilsel, Gokhan; Konopelko, L.; Krylov, A.; Lopushanskaya, E.

2018-01-01

Cholesterol is one of the most frequently measured substances in human blood/serum to assist in assessing the health status of individuals. Because of its clinical significance, CCQM-K6 determination of cholesterol in serum was completed in 2000 as one of the first key comparison (KC) studies performed within the Organic Analysis Working Group (OAWG). The first subsequent KC for cholesterol, CCQM-K6.1, was completed in 2001. Measurements for this second subsequent, CCQM-K6.2, were completed in 2012. These subsequent comparisons were conducted to enable CCQM members that had not participated in earlier studies to demonstrate their capabilities to measure a nonpolar (pKow < ‑2), low molecular mass (100 g/mol to 500 g/mol) metabolite in human serum at relatively high concentrations (1 mg/g to 3 mg/g) found in normal populations. Successful participation in CCQM-K6.2 demonstrated capabilities in analysis of complex biological matrices including sample preparation (extraction, derivatization), LC or GC separation, and quantification using an isotope dilution mass spectrometry approach. Normally in a subsequent KC, no key comparison reference value (KCRV) would be established and assessment of performance would be via the deviation of participants' results to the anchor institute's results, adjusted to account for the anchor's performance in the original comparison versus its KCRV. Due to the very long-time period since the original key comparison, the OAWG decided that this did not represent the best approach to assess performance in what is a relatively complex measurement. Given the excellent agreement between the anchor institute's results and robust consensus summary of the participants' values, the reference value for this study was taken as the anchor institute's result and treated as a 'KCRV'. Seven of the nine participants demonstrated agreement with the reference value. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

AACP Strategy for Addressing the Professional Development Needs of Department Chairs

PubMed Central

Rodriguez, Tobias E.; Weinstein, George; Sorofman, Bernard A.; Bosso, John A.; Kerr, Robert A.; Haden, N. Karl

2012-01-01

Objectives. Characterize the skills and abilities required for department chairs, identify development needs, and then create AACP professional development programs for chairs. Methods. A 30-question electronic survey was sent to AACP member department chairs related to aspects of chairing an academic department. Results. The survey identified development needs in the leadership, management, and personal abilities required for effective performance as department chair. The information was used to prioritize topics for subsequent AACP development programs. Subsequent programs conducted at AACP Interim and Annual Meetings were well attended and generally received favorable reviews from participants. A list of development resources was placed on the AACP website. Conclusions. This ongoing initiative is part of an AACP strategy to identify and address the professional development needs of department chairs. Survey results may also inform faculty members and other academic leaders about the roles and responsibilities of department chairs. PMID:22919099

Sulfur containing nanoporous materials, nanoparticles, methods and applications

DOEpatents

Archer, Lynden A.; Navaneedhakrishnan, Jayaprakash

2018-01-30

Sulfur containing nanoparticles that may be used within cathode electrodes within lithium ion batteries include in a first instance porous carbon shape materials (i.e., either nanoparticle shapes or "bulk" shapes that are subsequently ground to nanoparticle shapes) that are infused with a sulfur material. A synthetic route to these carbon and sulfur containing nanoparticles may use a template nanoparticle to form a hollow carbon shape shell, and subsequent dissolution of the template nanoparticle prior to infusion of the hollow carbon shape shell with a sulfur material. Sulfur infusion into other porous carbon shapes that are not hollow is also contemplated. A second type of sulfur containing nanoparticle includes a metal oxide material core upon which is located a shell layer that includes a vulcanized polymultiene polymer material and ion conducting polymer material. The foregoing sulfur containing nanoparticle materials provide the electrodes and lithium ion batteries with enhanced performance.

New atmospheric sensor analysis study

NASA Technical Reports Server (NTRS)

Parker, K. G.

1989-01-01

The functional capabilities of the ESAD Research Computing Facility are discussed. The system is used in processing atmospheric measurements which are used in the evaluation of sensor performance, conducting design-concept simulation studies, and also in modeling the physical and dynamical nature of atmospheric processes. The results may then be evaluated to furnish inputs into the final design specifications for new space sensors intended for future Spacelab, Space Station, and free-flying missions. In addition, data gathered from these missions may subsequently be analyzed to provide better understanding of requirements for numerical modeling of atmospheric phenomena.

The effect of cooling prior to and during exercise on exercise performance and capacity in the heat: a meta-analysis.

PubMed

Tyler, Christopher James; Sunderland, Caroline; Cheung, Stephen S

2015-01-01

Exercise is impaired in hot, compared with moderate, conditions. The development of hyperthermia is strongly linked to the impairment and as a result various strategies have been investigated to combat this condition. This meta-analysis focused on the most popular strategy: cooling. Precooling has received the most attention but recently cooling applied during the bout of exercise has been investigated and both were reviewed. We conducted a literature search and retrieved 28 articles which investigated the effect of cooling administered either prior to (n=23) or during (n=5) an exercise test in hot (wet bulb globe temperature >26°C) conditions. Mean and weighted effect size (Cohen's d) were calculated. Overall, precooling has a moderate (d=0.73) effect on subsequent performance but the magnitude of the effect is dependent on the nature of the test. Sprint performance is impaired (d=-0.26) but intermittent performance and prolonged exercise are both improved following cooling (d=0.47 and d=1.91, respectively). Cooling during exercise has a positive effect on performance and capacity (d=0.76). Improvements were observed in studies with and without cooling-induced physiological alterations, and the literature supports the suggestion of a dose-response relationship among cooling, thermal strain and improvements in performance and capacity. In summary, precooling can improve subsequent intermittent and prolonged exercise performance and capacity in a hot environment but sprint performance is impaired. Cooling during exercise also has a positive effect on exercise performance and capacity in a hot environment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Composite electrode/electrolyte structure

DOEpatents

Visco, Steven J.; Jacobson, Craig P.; DeJonghe, Lutgard C.

2004-01-27

Provided is an electrode fabricated from highly electronically conductive materials such as metals, metal alloys, or electronically conductive ceramics. The electronic conductivity of the electrode substrate is maximized. Onto this electrode in the green state, a green ionic (e.g., electrolyte) film is deposited and the assembly is co-fired at a temperature suitable to fully densify the film while the substrate retains porosity. Subsequently, a catalytic material is added to the electrode structure by infiltration of a metal salt and subsequent low temperature firing. The invention allows for an electrode with high electronic conductivity and sufficient catalytic activity to achieve high power density in ionic (electrochemical) devices such as fuel cells and electrolytic gas separation systems.

Improved silicon nitride for advanced heat engines

NASA Technical Reports Server (NTRS)

Yeh, Hun C.; Fang, Ho T.

1987-01-01

The technology base required to fabricate silicon nitride components with the strength, reliability, and reproducibility necessary for actual heat engine applications is presented. Task 2 was set up to develop test bars with high Weibull slope and greater high temperature strength, and to conduct an initial net shape component fabrication evaluation. Screening experiments were performed in Task 7 on advanced materials and processing for input to Task 2. The technical efforts performed in the second year of a 5-yr program are covered. The first iteration of Task 2 was completed as planned. Two half-replicated, fractional factorial (2 sup 5), statistically designed matrix experiments were conducted. These experiments have identified Denka 9FW Si3N4 as an alternate raw material to GTE SN502 Si3N4 for subsequent process evaluation. A detailed statistical analysis was conducted to correlate processing conditions with as-processed test bar properties. One processing condition produced a material with a 97 ksi average room temperature MOR (100 percent of goal) with 13.2 Weibull slope (83 percent of goal); another condition produced 86 ksi (6 percent over baseline) room temperature strength with a Weibull slope of 20 (125 percent of goal).

Simultaneous Rheoelectric Measurements of Strongly Conductive Complex Fluids

NASA Astrophysics Data System (ADS)

Helal, Ahmed; Divoux, Thibaut; McKinley, Gareth H.

2016-12-01

We introduce an modular fixture designed for stress-controlled rheometers to perform simultaneous rheological and electrical measurements on strongly conductive complex fluids under shear. By means of a nontoxic liquid metal at room temperature, the electrical connection to the rotating shaft is completed with minimal additional mechanical friction, allowing for simultaneous stress measurements at values as low as 1 Pa. Motivated by applications such as flow batteries, we use the capabilities of this design to perform an extensive set of rheoelectric experiments on gels formulated from attractive carbon-black particles, at concentrations ranging from 4 to 15 wt %. First, experiments on gels at rest prepared with different shear histories show a robust power-law scaling between the elastic modulus G0' and the conductivity σ0 of the gels—i.e., G0'˜σ0α, with α =1.65 ±0.04 , regardless of the gel concentration. Second, we report conductivity measurements performed simultaneously with creep experiments. Changes in conductivity in the early stage of the experiments, also known as the Andrade-creep regime, reveal for the first time that plastic events take place in the bulk, while the shear rate γ ˙ decreases as a weak power law of time. The subsequent evolution of the conductivity and the shear rate allows us to propose a local yielding scenario that is in agreement with previous velocimetry measurements. Finally, to establish a set of benchmark data, we determine the constitutive rheological and electrical behavior of carbon-black gels. Corrections first introduced for mechanical measurements regarding shear inhomogeneity and wall slip are carefully extended to electrical measurements to accurately distinguish between bulk and surface contributions to the conductivity. As an illustrative example, we examine the constitutive rheoelectric properties of five different grades of carbon-black gels and we demonstrate the relevance of this rheoelectric apparatus as a versatile characterization tool for strongly conductive complex fluids and their applications.

The Role of Substance Use Initiation in Adolescent Development of Subsequent Substance-Related Problems

ERIC Educational Resources Information Center

Magid, Viktoriya; Moreland, Angela D.

2014-01-01

A systematic review was conducted on the role of substance use initiation in subsequent use and substance-related problems among adolescents. Specifically, we examine previous studies to identify whether age of onset predicts subsequent levels of misuse; we also posit reasons for this association that have been suggested within the literature. In…

Chapter C. The Loma Prieta, California, Earthquake of October 17, 1989 - Building Structures

USGS Publications Warehouse

Çelebi, Mehmet

1998-01-01

Several approaches are used to assess the performance of the built environment following an earthquake -- preliminary damage surveys conducted by professionals, detailed studies of individual structures, and statistical analyses of groups of structures. Reports of damage that are issued by many organizations immediately following an earthquake play a key role in directing subsequent detailed investigations. Detailed studies of individual structures and statistical analyses of groups of structures may be motivated by particularly good or bad performance during an earthquake. Beyond this, practicing engineers typically perform stress analyses to assess the performance of a particular structure to vibrational levels experienced during an earthquake. The levels may be determined from recorded or estimated ground motions; actual levels usually differ from design levels. If a structure has seismic instrumentation to record response data, the estimated and recorded response and behavior of the structure can be compared.

Structural assessment of a Space Station solar dynamic heat receiver thermal energy storage canister

NASA Technical Reports Server (NTRS)

Tong, M. T.; Kerslake, T. W.; Thompson, R. L.

1988-01-01

This paper assesses the structural performance of a Space Station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start-up operating conditions. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite-element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes-188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically-determined temperature was compared with that based on the experimentally-measured temperature data.

Structural assessment of a space station solar dynamic heat receiver thermal energy storage canister

NASA Technical Reports Server (NTRS)

Thompson, R. L.; Kerslake, T. W.; Tong, M. T.

1988-01-01

The structural performance of a space station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start up operating conditions was assessed. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes 188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically determined temperature was compared with that based on the experimentally measured temperature data.

Conceptual design studies and experiments related to cavity exhaust systems for nuclear light bulb configurations

NASA Technical Reports Server (NTRS)

Kendall, J. S.; Stoeffler, R. C.

1972-01-01

Investigations of various phases of gaseous nuclear rocket technology have been conducted. The principal research efforts have recently been directed toward the closed-cycle, vortex-stabilized nuclear light bulb engine and toward a small-scale fissioning uranium plasma experiment that could be conducted in the Los Alamos Scientific Laboratory's Nuclear Furnace. The engine concept is based on the transfer of energy by thermal radiation from gaseous fissioning uranium, through a transparent wall, to hydrogen propellant. The reference engine configuration is comprised of seven unit cavities, each having its own fuel transparent wall and propellant duct. The basic design of the engine is described. Subsequent studies performed to supplement and investigate the basic design are reported. Summaries of other nuclear light bulb research programs are included.

Comparison of microwave and conduction-convection heating autohydrolysis pretreatment for bioethanol production.

PubMed

Aguilar-Reynosa, Alejandra; Romaní, Aloia; Rodríguez-Jasso, Rosa M; Aguilar, Cristóbal N; Garrote, Gil; Ruiz, Héctor A

2017-11-01

This work describes the application of two forms of heating for autohydrolysis pretreatment on isothermal regimen: conduction-convection heating and microwave heating processing using corn stover as raw material for bioethanol production. Pretreatments were performed using different operational conditions: residence time (10-50 min) and temperature (160-200°C) for both pretreatments. Subsequently, the susceptibility of pretreated solids was studied using low enzyme loads, and high substrate loads. The highest conversion was 95.1% for microwave pretreated solids. Also solids pretreated by microwave heating processing showed better ethanol conversion in simultaneous saccharification and fermentation process (92% corresponding to 33.8g/L). Therefore, microwave heating processing is a promising technology in the pretreatment of lignocellulosic materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

Electrostatic Evaluation of the SRB Velostat(Trademark) Pads

NASA Technical Reports Server (NTRS)

Buhler, Charles R.; Calle, Carlos I.

2007-01-01

During RSRM Grain inspection, pads constructed of Velostat are grounded and installed in the RSRM bore enabling inspectors to move throughout the bore during the inspection. Velostat pads are installed by grounding the first pad installed and subsequent pads are installed overlapping the previously installed pad maintaining a conductive path to facility ground. Pads are removed upon completion of the inspection in a reverse fashion. As the pads are removed scanning of propellant surfaces is performed per OMRS. During PPICI Audit of B5308.006 (Forward Segment Grain Inspection) in October 07 one audit finding noted that electrostatic scanning of propellant surfaces was being performed during removal of conductive pads following grain inspection. ATK does not perform electrostatic scanning of propellant surfaces during pad removal following final inspection at the plant. The integrated team consisting of NASA SE, USA SE, USA QE, ATK LSS, ATK Systems Safety and ATK DE concurred that electrostatic scanning of propellant surfaces was unnecessary as the conductive pads are grounded. Additional time spent in bore performing scanning presents itself as additional risk. Technicians reported that they have never seen any voltage readings while scanning propellant surfaces during pad removal. USA Systems engineering has written KB 17530 in response to the finding which will delete the requirement (item 2 B47GEN.ll0) to scan propellant surfaces during pad removal. As a result of an E3 panel discussion on December 13, 2007, it was decided that verification of the electrical grounding of the Velostat pads be verified.

Immediate effects of Alpha/theta and Sensory-Motor Rhythm feedback on music performance.

PubMed

Gruzelier, J H; Hirst, L; Holmes, P; Leach, J

2014-07-01

This is one of a series of investigations comparing two EEG-neurofeedback protocols - Alpha/theta (A/T) and Sensory-Motor Rhythm (SMR) - for performance enhancement in the Arts, here with the focus on music. The original report (Egner and Gruzelier, 2003) established a beneficial outcome for elite conservatoire musicians following A/T training in two investigations. Subsequently this A/T advantage was replicated for both advanced instrumental and novice singing abilities, including improvisation, while SMR training benefited novice performance only (Gruzelier, Holmes et al., 2014). Here we report a replication of the latter study in university instrumentalists who as before were novice singers with one design change - post-training performances were conducted within the tenth final session instead of on a subsequent occasion. As before expert judges rated the domains of Creativity/Musicality, Communication/Presentation and Technique. The proximity to training of the music performances within the last session likely compromised gains from A/T learning, but perhaps reinforced the impact of SMR training efficacy. In support of validation there was evidence of strong within- and across-session A/T learning and positive linear trends for across-session SMR/theta and SMR/beta-2 ratio learning. In support of mediation learning correlated with music performance. The A/T outcome was markedly discrepant from previous studies and should dispel any impression that the hypnogogic state itself is transferred to the performance context. The effects of SMR ratio training are consistent with an impact on lower-order abilities required in novice performance such as sustained attention and memory, and benefiting all three domains of music assessment. Copyright © 2014 Elsevier B.V. All rights reserved.

DRD4 Genotype and the Developmental Link of Peer Social Preference with Conduct Problems and Prosocial Behavior Across Ages 9-12 Years.

PubMed

Buil, J Marieke; Koot, Hans M; Olthof, Tjeert; Nelson, Kelly A; van Lier, Pol A C

2015-07-01

The peer environment is among the most important factors for children's behavioral development. However, not all children are equally influenced by their peers, which is potentially due to their genetic make-up. The dopamine receptor D4 gene (DRD4) is a potential candidate gene that may influence children's susceptibility to the peer environment. In the present study, we explored whether variations in the DRD4 gene moderated the association between children's social standing in the peer group (i.e., social preference among classmates) with subsequent conduct problems and prosocial behavior among 405 (51% females) elementary school children followed annually throughout early adolescence (ages 9-12 years). The behavioral development of children with and without the DRD4 7-repeat allele was compared. The results indicated that children who had higher positive social preference scores (i.e., who were more liked relative to disliked by their peers) showed less conduct problem development in subsequent years relative to children who had lower positive social preference scores. In contrast, children who had more negative preference scores (i.e., who were more disliked relative to liked among peers) showed more conduct problem development in subsequent years, relative to children who had less negative preference scores. However, these effects only occurred when children had a 7-repeat allele. For children who did not have a 7-repeat allele, the level of social preference was not associated with subsequent conduct problems. No evidence for gene-environment interaction effects for prosocial behavior was found. The implications for our understanding of conduct problem development and its prevention are discussed.

Multispectral scanner data applications evaluation. Volume 1: User applications study

NASA Technical Reports Server (NTRS)

Thomson, F. J.; Erickson, J. D.; Nalepka, R. F.; Weber, J. D.

1974-01-01

A six-month systems study of earth resource surveys from satellites was conducted and is reported. SKYLAB S-192 multispectral scanner (MSS) data were used as a baseline to aid in evaluating the characteristics of future systems using satellite MSS sensors. The study took the viewpoint that overall system (sensor and processing) characteristics and parameter values should be determined largely by user requirements for automatic information extraction performance in quasi-operational earth resources surveys, the other major factor being hardware limitations imposed by state-of-the-art technology and cost. The objective was to use actual aircraft and spacecraft MSS data to outline parametrically the trade-offs between user performance requirements and hardware performance and limitations so as to allow subsequent evaluation of compromises which must be made in deciding what system(s) to build.

Self-Reported Impact of Chlamydia Testing on Subsequent Behavior: Results of an Online Survey of Young Adults in England.

PubMed

Hartney, Thomas; Baraitser, Paula; Nardone, Anthony

2015-09-01

The National Chlamydia Screening Programme performs 1.7 million tests annually among young adults in England. The effect of chlamydia screening on subsequent behavior is unknown. This study examined the self-reported impact of testing on young adults' subsequent health care-seeking and sexual behavior. We conducted a cross-sectional Web-based anonymous survey using an online panel to recruit 1521 young adults aged 16 to 24 years and resident in England. Survey questions were developed using the theory of planned behavior. Multivariate log-binomial regression was used to identify the variables associated with an impact on subsequent behavior after testing. Most respondents reported that being tested for chlamydia had a positive effect on their subsequent sexual behavior (68.6%; 422/615) or health care-seeking behavior (80.0%; 492/615). In multivariate analysis, being female and having a high level of engagement at last test were both associated with positive impacts on sexual behavior (72.7% [adjusted prevalence ratio {aPR}, 1.19; 95% confidence interval {CI}, 1.07-1.33] and 82.7% [aPR, 1.55; 95% CI, 1.27-1.89], respectively), and health care-seeking behavior (84.4% [aPR, 1.13; 95% Cl, 1.04-1.24] and 86.3% [aPR, 1.23; 95% CI, 1.07-1.41], respectively). Among respondents with minimum level of engagement, 72.4% (76/105) reported an increase in subsequent health care-seeking behavior. Chlamydia testing had a positive impact on young adults' self-reported health care-seeking and sexual behavior. This suggests that chlamydia screening has a wider effect on young adults' sexual health beyond that of treatment alone.

Sea Ice Detection Based on an Improved Similarity Measurement Method Using Hyperspectral Data.

PubMed

Han, Yanling; Li, Jue; Zhang, Yun; Hong, Zhonghua; Wang, Jing

2017-05-15

Hyperspectral remote sensing technology can acquire nearly continuous spectrum information and rich sea ice image information, thus providing an important means of sea ice detection. However, the correlation and redundancy among hyperspectral bands reduce the accuracy of traditional sea ice detection methods. Based on the spectral characteristics of sea ice, this study presents an improved similarity measurement method based on linear prediction (ISMLP) to detect sea ice. First, the first original band with a large amount of information is determined based on mutual information theory. Subsequently, a second original band with the least similarity is chosen by the spectral correlation measuring method. Finally, subsequent bands are selected through the linear prediction method, and a support vector machine classifier model is applied to classify sea ice. In experiments performed on images of Baffin Bay and Bohai Bay, comparative analyses were conducted to compare the proposed method and traditional sea ice detection methods. Our proposed ISMLP method achieved the highest classification accuracies (91.18% and 94.22%) in both experiments. From these results the ISMLP method exhibits better performance overall than other methods and can be effectively applied to hyperspectral sea ice detection.

Sea Ice Detection Based on an Improved Similarity Measurement Method Using Hyperspectral Data

PubMed Central

Han, Yanling; Li, Jue; Zhang, Yun; Hong, Zhonghua; Wang, Jing

2017-01-01

Hyperspectral remote sensing technology can acquire nearly continuous spectrum information and rich sea ice image information, thus providing an important means of sea ice detection. However, the correlation and redundancy among hyperspectral bands reduce the accuracy of traditional sea ice detection methods. Based on the spectral characteristics of sea ice, this study presents an improved similarity measurement method based on linear prediction (ISMLP) to detect sea ice. First, the first original band with a large amount of information is determined based on mutual information theory. Subsequently, a second original band with the least similarity is chosen by the spectral correlation measuring method. Finally, subsequent bands are selected through the linear prediction method, and a support vector machine classifier model is applied to classify sea ice. In experiments performed on images of Baffin Bay and Bohai Bay, comparative analyses were conducted to compare the proposed method and traditional sea ice detection methods. Our proposed ISMLP method achieved the highest classification accuracies (91.18% and 94.22%) in both experiments. From these results the ISMLP method exhibits better performance overall than other methods and can be effectively applied to hyperspectral sea ice detection. PMID:28505135

The long road to employment: Incivility experienced by job seekers.

PubMed

Ali, Abdifatah A; Ryan, Ann Marie; Lyons, Brent J; Ehrhart, Mark G; Wessel, Jennifer L

2016-03-01

This study addresses how job seekers' experiences of rude and discourteous treatment--incivility--can adversely affect self-regulatory processes underlying job searching. Using the social-cognitive model (Zimmerman, 2000), we integrate social-cognitive theory with the goal orientation literature to examine how job search self-efficacy mediates the relationship between incivility and job search behaviors and how individual differences in learning goal orientation and avoid-performance goal orientation moderate that process. We conducted 3 studies with diverse methods and samples. Study 1 employed a mixed-method design to understand the nature of incivility within the job search context and highlight the role of attributions in linking incivility to subsequent job search motivation and behavior. We tested our hypotheses in Study 2 and 3 employing time-lagged research designs with unemployed job seekers and new labor market entrants. Across both Study 2 and 3 we found evidence that the negative effect of incivility on job search self-efficacy and subsequent job search behaviors are stronger for individuals low, rather than high, in avoid-performance goal orientation. Theoretical implications of our findings and practical recommendations for how to address the influence of incivility on job seeking are discussed. (c) 2016 APA, all rights reserved).

Optimal Interval for Repeated Gastric Cancer Screening in Normal-Risk Healthy Korean Adults: A Retrospective Cohort Study

PubMed Central

Bae, Jong-Myon; Shin, Sang Yop; Kim, Eun Hee

2015-01-01

Purpose This retrospective cohort study was conducted to estimate the optimal interval for gastric cancer screening in Korean adults with initial negative screening results. Materials and Methods This study consisted of voluntary Korean screenees aged 40 to 69 years who underwent subsequent screening gastroscopies after testing negative in the baseline screening performed between January 2007 and December 2011. A new case was defined as the presence of gastric cancer cells in biopsy specimens obtained upon gastroscopy. The follow-up periods were calculated during the months between the date of baseline screening gastroscopy and positive findings upon subsequent screenings, stratified by sex and age group. The mean sojourn time (MST) for determining the screening interval was estimated using the prevalence/incidence ratio. Results Of the 293,520 voluntary screenees for the gastric cancer screening program, 91,850 (31.29%) underwent subsequent screening gastroscopies between January 2007 and December 2011. The MSTs in men and women were 21.67 months (95% confidence intervals [CI], 17.64 to 26.88 months) and 15.14 months (95% CI, 9.44 to 25.85 months), respectively. Conclusion These findings suggest that the optimal interval for subsequent gastric screening in both men and women is 24 months, supporting the 2-year interval recommended by the nationwide gastric cancer screening program. PMID:25687874

7 CFR 3022.5 - Reservation of right to conduct subsequent inquiry, investigation, and adjudication.

Code of Federal Regulations, 2011 CFR

2011-01-01

... USDA-FUNDED EXTRAMURAL RESEARCH; RESEARCH MISCONDUCT § 3022.5 Reservation of right to conduct..., investigation, and adjudication into allegations of research misconduct at a research institution conducting... research misconduct procedures in place, the research institution conducting the extramural research at...

7 CFR 3022.5 - Reservation of right to conduct subsequent inquiry, investigation, and adjudication.

Code of Federal Regulations, 2012 CFR

2012-01-01

... USDA-FUNDED EXTRAMURAL RESEARCH; RESEARCH MISCONDUCT § 3022.5 Reservation of right to conduct..., investigation, and adjudication into allegations of research misconduct at a research institution conducting... research misconduct procedures in place, the research institution conducting the extramural research at...

Working memory overload: fronto-limbic interactions and effects on subsequent working memory function.

PubMed

Yun, Richard J; Krystal, John H; Mathalon, Daniel H

2010-03-01

The human working memory system provides an experimentally useful model for examination of neural overload effects on subsequent functioning of the overloaded system. This study employed functional magnetic resonance imaging in conjunction with a parametric working memory task to characterize the behavioral and neural effects of cognitive overload on subsequent cognitive performance, with particular attention to cognitive-limbic interactions. Overloading the working memory system was associated with varying degrees of subsequent decline in performance accuracy and reduced activation of brain regions central to both task performance and suppression of negative affect. The degree of performance decline was independently predicted by three separate factors operating during the overload condition: the degree of task failure, the degree of amygdala activation, and the degree of inverse coupling between the amygdala and dorsolateral prefrontal cortex. These findings suggest that vulnerability to overload effects in cognitive functioning may be mediated by reduced amygdala suppression and subsequent amygdala-prefrontal interaction.

Effect of groundwater flow on remediation of dissolved-phase VOC contamination using air sparging.

PubMed

Reddy, K R; Adams, J A

2000-02-25

This paper presents two-dimensional laboratory experiments performed to study how groundwater flow may affect the injected air zone of influence and remedial performance, and how injected air may alter subsurface groundwater flow and contaminant migration during in situ air sparging. Tests were performed by subjecting uniform sand profiles contaminated with dissolved-phase benzene to a hydraulic gradient and two different air flow rates. The results of the tests were compared to a test subjected to a similar air flow rate but a static groundwater condition. The test results revealed that the size and shape of the zone of influence were negligibly affected by groundwater flow, and as a result, similar rates of contaminant removal were realized within the zone of influence with and without groundwater flow. The air flow, however, reduced the hydraulic conductivity within the zone of influence, reducing groundwater flow and subsequent downgradient contaminant migration. The use of a higher air flow rate further reduced the hydraulic conductivity and decreased groundwater flow and contaminant migration. Overall, this study demonstrated that air sparging may be effectively implemented to intercept and treat a migrating contaminant plume.

Optimal dose selection accounting for patient subpopulations in a randomized Phase II trial to maximize the success probability of a subsequent Phase III trial.

PubMed

Takahashi, Fumihiro; Morita, Satoshi

2018-02-08

Phase II clinical trials are conducted to determine the optimal dose of the study drug for use in Phase III clinical trials while also balancing efficacy and safety. In conducting these trials, it may be important to consider subpopulations of patients grouped by background factors such as drug metabolism and kidney and liver function. Determining the optimal dose, as well as maximizing the effectiveness of the study drug by analyzing patient subpopulations, requires a complex decision-making process. In extreme cases, drug development has to be terminated due to inadequate efficacy or severe toxicity. Such a decision may be based on a particular subpopulation. We propose a Bayesian utility approach (BUART) to randomized Phase II clinical trials which uses a first-order bivariate normal dynamic linear model for efficacy and safety in order to determine the optimal dose and study population in a subsequent Phase III clinical trial. We carried out a simulation study under a wide range of clinical scenarios to evaluate the performance of the proposed method in comparison with a conventional method separately analyzing efficacy and safety in each patient population. The proposed method showed more favorable operating characteristics in determining the optimal population and dose.

Combining 3D Hydraulic Tomography with Tracer Tests for Improved Transport Characterization.

PubMed

Sanchez-León, E; Leven, C; Haslauer, C P; Cirpka, O A

2016-07-01

Hydraulic tomography (HT) is a method for resolving the spatial distribution of hydraulic parameters to some extent, but many details important for solute transport usually remain unresolved. We present a methodology to improve solute transport predictions by combining data from HT with the breakthrough curve (BTC) of a single forced-gradient tracer test. We estimated the three dimensional (3D) hydraulic-conductivity field in an alluvial aquifer by inverting tomographic pumping tests performed at the Hydrogeological Research Site Lauswiesen close to Tübingen, Germany, using a regularized pilot-point method. We compared the estimated parameter field to available profiles of hydraulic-conductivity variations from direct-push injection logging (DPIL), and validated the hydraulic-conductivity field with hydraulic-head measurements of tests not used in the inversion. After validation, spatially uniform parameters for dual-domain transport were estimated by fitting tracer data collected during a forced-gradient tracer test. The dual-domain assumption was used to parameterize effects of the unresolved heterogeneity of the aquifer and deemed necessary to fit the shape of the BTC using reasonable parameter values. The estimated hydraulic-conductivity field and transport parameters were subsequently used to successfully predict a second independent tracer test. Our work provides an efficient and practical approach to predict solute transport in heterogeneous aquifers without performing elaborate field tracer tests with a tomographic layout. © 2015, National Ground Water Association.

Thermal Conductivity of Copoly(ethylene vinyl acetate)/Nano-Filler Blends

NASA Technical Reports Server (NTRS)

Ghose, S.; Watson, K. A.; Working, D. C.; Connell, J. W.; Smith, J. G.; Lin, Y.; Sun, Y. P.

2007-01-01

The development of flexible, thermally conductive fabrics and plastic tubes for the Liquid Cooling and Ventilation Garment (LCVG) are needed to reduce weight and improve the mobility, comfort, and performance of future spacesuits. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As a continuation of our work on the improvement of thermal conductivity (TC) of polymeric materials, nanocomposites were prepared from copoly(ethylene vinyl acetate), trade name Elvax 260TradeMark), metallized carbon nanofibers (CNFs), nickel (Ni) nanostrands, boron nitride both alone and as mixtures with aluminum powder. The nanocomposites were prepared by melt mixing at various loading levels and subsequently fabricated into several material forms (i.e., ribbons, tubes, and compression molded plaques) for analysis. Ribbons and tubes were extruded to form samples in which the nanoparticles were aligned in the direction of flow. The degree of dispersion and alignment of the nanoparticles were investigated using high-resolution scanning electron microscopy. Tensile properties of the aligned samples were determined at room temperature. TC measurements were performed using a laser flash (Nanoflash(TradeMark) technique. The TC of the samples was measured in both the direction of alignment as well as transverse. Tubing of comparable dimensions to that used in the LCVG was extruded from select compositions and the thermal conductivities of the tubes measured.

The Influence of Early Protein Energy Malnutrition on Subsequent Behavior and Intellectual Performance.

ERIC Educational Resources Information Center

Gupta, Sarita

1990-01-01

Protein-energy malnutrition in early childhood, as seen in many developing countries, influences subsequent behavior and intellectual performance. These impairments are associated with further reduction in fine motor skills and academic performance. (Author)

MnO Nanoparticle@Mesoporous Carbon Composites Grown on Conducting Substrates Featuring High-performance Lithium-ion Battery, Supercapacitor and Sensor

PubMed Central

Wang, Tianyu; Peng, Zheng; Wang, Yuhang; Tang, Jing; Zheng, Gengfeng

2013-01-01

We demonstrate a facile, two-step coating/calcination approach to grow a uniform MnO nanoparticle@mesoporous carbon (MnO@C) composite on conducting substrates, by direct coating of the Mn-oleate precursor solution without any conducting/binding reagents, and subsequent thermal calcination. The monodispersed, sub-10 nm MnO nanoparticles offer high theoretical energy storage capacities and catalytic properties, and the mesoporous carbon coating allows for enhanced electrolyte transport and charge transfer towards/from MnO surface. In addition, the direct growth and attachment of the MnO@C nanocomposite in the supporting conductive substrates provide much reduced contact resistances and efficient charge transfer. These excellent features allow the use of MnO@C nanocomposites as lithium-ion battery and supercapacitor electrodes for energy storage, with high reversible capacity at large current densities, as well as excellent cycling and mechanical stabilities. Moreover, this MnO@C nanocomposite has also demonstrated a high sensitivity for H2O2 detection, and also exhibited attractive potential for the tumor cell analysis. PMID:24045767

Thermal conductivity measurements of proton-heated warm dense aluminum

NASA Astrophysics Data System (ADS)

McKelvey, A.; Kemp, G.; Sterne, P.; Fernandez, A.; Shepherd, R.; Marinak, M.; Link, A.; Collins, G.; Sio, H.; King, J.; Freeman, R.; Hua, R.; McGuffey, C.; Kim, J.; Beg, F.; Ping, Y.

2017-10-01

We present the first thermal conductivity measurements of warm dense aluminum at 0.5-2.7 g/cc and 2-10 eV, using a recently developed platform of differential heating. A temperature gradient is induced in a Au/Al dual-layer target by proton heating, and subsequent heat flow from the hotter Au to the Al rear surface is detected by two simultaneous time-resolved diagnostics. A systematic data set allows for constraining both thermal conductivity and equation-of-state models. Simulations using Purgatorio model or Sesame S27314 for Al thermal conductivity and LEOS for Au/Al release equation-of-state show good agreement with data after 15 ps. Predictions by other models, such Lee-More, Sesame 27311 and 29373, are outside of experimental error bars. Discrepancy still exists at early time 0-15 ps, likely due to non-equilibrium conditions. (Y. Ping et al. Phys. Plasmas, 2015, A. Mckelvey, et al. Sci. Reports 2017). This work was performed under the auspices of the DOE by LLNL under contract DE-AC52-07NA27344 with support from DOE OFES Early Career program and LLNL LDRD program.

5-inch-size liquid crystal flat panel display evaluation test by flight simulator

NASA Astrophysics Data System (ADS)

Kawahara, Hiroyasu; Watanabe, Akira; Wakairo, Kaoru; Udagawa, Tomoyuki; Kurihara, Yoichiro

An evaluation test is conducted on the function, performance, and display format of a 5x5 inch flat panel display (FPD) in a flight simulator. The FPD utilizes a color liquid crystal panel that is compact and lightweight and has excellent visibility. The simulator evaluation test is carried out in sequence with the conventional takeoff and landing to altitude, and then conversion to STOL procedures for flight path and subsequent approach and landing. It is shown that the liquid crystal display could be employed as a satisfactory indicator for aircraft instrumentation.

Structural tailoring of counter rotation propfans

NASA Technical Reports Server (NTRS)

Brown, Kenneth W.; Hopkins, D. A.

1989-01-01

The STAT program was designed for the optimization of single rotation, tractor propfan designs. New propfan designs, however, generally consist of two counter rotating propfan rotors. STAT is constructed to contain two levels of analysis. An interior loop, consisting of accurate, efficient approximate analyses, is used to perform the primary propfan optimization. Once an optimum design has been obtained, a series of refined analyses are conducted. These analyses, while too computer time expensive for the optimization loop, are of sufficient accuracy to validate the optimized design. Should the design prove to be unacceptable, provisions are made for recalibration of the approximate analyses, for subsequent reoptimization.

Bi cluster-assembled interconnects produced using SU8 templates

NASA Astrophysics Data System (ADS)

Partridge, J. G.; Matthewson, T.; Brown, S. A.

2007-04-01

Bi clusters with an average diameter of 25 nm have been deposited from an inert gas aggregation source and assembled into thin-film interconnects which are formed between planar electrical contacts and supported on Si substrates passivated with Si3N4 or thermally grown oxide. A layer of SU8 (a negative photoresist based on EPON SU-8 epoxy resin) is patterned using optical or electron-beam lithography, and it defines the position and dimensions of the cluster film. The conduction between the contacts is monitored throughout the deposition/assembly process, and subsequent I(V) characterization is performed in situ. Bi cluster-assembled interconnects have been fabricated with nanoscale widths and with up to 1:1 thickness:width aspect ratios. The conductivity of these interconnects has been increased, post-deposition, using a simple thermal annealing process.

Integrated Testing of a 4-Bed Molecular Sieve and a Temperature-Swing Adsorption Compressor for Closed-Loop Air Revitalization

NASA Technical Reports Server (NTRS)

Knox, James C.; Mulloth, Lila M.; Affleck, David L.

2004-01-01

Accumulation and subsequent compression of carbon dioxide that is removed from space cabin are two important processes involved in a closed-loop air revitalization scheme of the International Space Station (ISS). The 4-Bed Molecular Sieve (4BMS) of ISS currently operates in an open loop mode without a compressor. This paper reports the integrated 4BMS and liquid-cooled TSAC testing conducted during the period of March 3 to April 18, 2003. The TSAC prototype was developed at NASA Ames Research Center (ARC). The 4BMS was modified to a functionally flight-like condition at NASA Marshall Space Flight Center (MSFC). Testing was conducted at MSFC. The paper provides details of the TSAC operation at various CO2 loadings and corresponding performance of CDRA.

Photogrammetric Assessment of the Hubble Space Telescope Solar Arrays During the Second Servicing Mission

NASA Technical Reports Server (NTRS)

Sapp, C. A.; Dragg, J. L.; Snyder, M. W.; Gaunce, M. T.; Decker, J. E.

1998-01-01

This report documents the photogrammetric assessment of the Hubble Space Telescope (HST) solar arrays conducted by the NASA c Center Image Science and Analysis Group during Second Servicing Mission 2 (SM-2) on STS-82 in February 1997. Two type solar array analyses were conducted during the mission using Space Shuttle payload bay video: (1) measurement of solar array motion due to induced loads, and (2) measurement of the solar array static or geometric twist caused by the cumulative array loading. The report describes pre-mission planning and analysis technique development activities conducted to acquire and analyze solar array imagery data during SM-2. This includes analysis of array motion obtained during SM-1 as a proof-of-concept of the SM-2 measurement techniques. The report documents the results of real-time analysis conducted during the mission and subsequent analysis conducted post-flight. This report also provides a summary of lessons learned on solar array imagery analysis from SM-2 and recommendations for future on-orbit measurements applicable to HST SM-3 and to the International Space Station. This work was performed under the direction of the Goddard Space Flight Center HST Flight Systems and Servicing Project.

Effects of head movement and proprioceptive feedback in training of sound localization

PubMed Central

Honda, Akio; Shibata, Hiroshi; Hidaka, Souta; Gyoba, Jiro; Iwaya, Yukio; Suzuki, Yôiti

2013-01-01

We investigated the effects of listeners' head movements and proprioceptive feedback during sound localization practice on the subsequent accuracy of sound localization performance. The effects were examined under both restricted and unrestricted head movement conditions in the practice stage. In both cases, the participants were divided into two groups: a feedback group performed a sound localization drill with accurate proprioceptive feedback; a control group conducted it without the feedback. Results showed that (1) sound localization practice, while allowing for free head movement, led to improvement in sound localization performance and decreased actual angular errors along the horizontal plane, and that (2) proprioceptive feedback during practice decreased actual angular errors in the vertical plane. Our findings suggest that unrestricted head movement and proprioceptive feedback during sound localization training enhance perceptual motor learning by enabling listeners to use variable auditory cues and proprioceptive information. PMID:24349686

Miniaturisation of Pressure-Sensitive Paint Measurement Systems Using Low-Cost, Miniaturised Machine Vision Cameras.

PubMed

Quinn, Mark Kenneth; Spinosa, Emanuele; Roberts, David A

2017-07-25

Measurements of pressure-sensitive paint (PSP) have been performed using new or non-scientific imaging technology based on machine vision tools. Machine vision camera systems are typically used for automated inspection or process monitoring. Such devices offer the benefits of lower cost and reduced size compared with typically scientific-grade cameras; however, their optical qualities and suitability have yet to be determined. This research intends to show relevant imaging characteristics and also show the applicability of such imaging technology for PSP. Details of camera performance are benchmarked and compared to standard scientific imaging equipment and subsequent PSP tests are conducted using a static calibration chamber. The findings demonstrate that machine vision technology can be used for PSP measurements, opening up the possibility of performing measurements on-board small-scale model such as those used for wind tunnel testing or measurements in confined spaces with limited optical access.

[Analysis of the results in pheochromoblastoma treatment].

PubMed

Kvacheniuk, A M

2004-03-01

Results of operative treatment of 60 patients with pheochromoblastoma were analyzed. Surgical method of treatment is the most effective one. Lumbotomic extraperitoneal access is the method of choice. Oncological radicalism demands not only complete excision of primary tumor in sole capsule together with suprarenal gland, but also the revision of paranephral, paracaval and paraaortal cellule. Radical intervention with subsequent durable remission was performed in 38 (63.3%) of patients, also in 3 (5%) the remission was achieved after reintervention conduction. Two (3.3%) patients are living with persisting disease, which can be controlled easier using medicines, than before the operation. In 8 (13.3%) patients with the spread metastases revealed and they were directed to symptomatic therapy by their residence. The recurrence occurrence after primary operation performance is unfavorable prognostic feature: 55.8% of such patients were considered incurable. Operative treatment performed had guaranteed the disease remission achievement in 71.9% of patients.

Miniaturisation of Pressure-Sensitive Paint Measurement Systems Using Low-Cost, Miniaturised Machine Vision Cameras

PubMed Central

Spinosa, Emanuele; Roberts, David A.

2017-01-01

Measurements of pressure-sensitive paint (PSP) have been performed using new or non-scientific imaging technology based on machine vision tools. Machine vision camera systems are typically used for automated inspection or process monitoring. Such devices offer the benefits of lower cost and reduced size compared with typically scientific-grade cameras; however, their optical qualities and suitability have yet to be determined. This research intends to show relevant imaging characteristics and also show the applicability of such imaging technology for PSP. Details of camera performance are benchmarked and compared to standard scientific imaging equipment and subsequent PSP tests are conducted using a static calibration chamber. The findings demonstrate that machine vision technology can be used for PSP measurements, opening up the possibility of performing measurements on-board small-scale model such as those used for wind tunnel testing or measurements in confined spaces with limited optical access. PMID:28757553

The Development of Comorbid Conduct Problems in Children With ADHD: An Example of an Integrative Developmental Psychopathology Perspective.

PubMed

Danforth, Jeffrey S; Connor, Daniel F; Doerfler, Leonard A

2016-03-01

We describe interactions among factors that contribute to the development of conduct problems among children with ADHD. An integrative developmental psychopathology analysis combines various approaches and posits one model of how diverse risk factors operate together to contribute to the development of conduct problems among children with ADHD. Substantial genetic risk increases covariation between ADHD and conduct problems. Candidate genes are associated with CNS monoaminergic neurotransmission. Subsequent neurodevelopmental impairment interferes with executive function, with impaired verbal working memory playing an important role. Parent/child bi-directional influences exacerbate the risk for conduct problems when ADHD symptoms increase the likelihood of a coercive parenting style. Parent stress in reaction to child comorbid ADHD and conduct problems, and parent attribution for the child's conduct problem behavior, add to the potential for coercion and reduce constructive parent-child interaction that might otherwise enhance the development of verbal working memory. In an integrated manner, these variables increase the risk that a child with ADHD will subsequently develop conduct problems. © The Author(s) 2014.

Behavior of ionic conducting IPN actuators in simulated space conditions

NASA Astrophysics Data System (ADS)

Fannir, Adelyne; Plesse, Cédric; Nguyen, Giao T. M.; Laurent, Elisabeth; Cadiergues, Laurent; Vidal, Frédéric

2016-04-01

The presentation focuses on the performances of flexible all-polymer electroactive actuators under space-hazardous environmental factors in laboratory conditions. These bending actuators are based on high molecular weight nitrile butadiene rubber (NBR), poly(ethylene oxide) (PEO) derivative and poly(3,4-ethylenedioxithiophene) (PEDOT). The electroactive PEDOT is embedded within the PEO/NBR membrane which is subsequently swollen with an ionic liquid as electrolyte. Actuators have been submitted to thermal cycling test between -25 to 60°C under vacuum (2.4 10-8 mbar) and to ionizing Gamma radiations at a level of 210 rad/h during 100 h. Actuators have been characterized before and after space environmental condition ageing. In particular, the viscoelasticity properties and mechanical resistance of the materials have been determined by dynamic mechanical analysis and tensile tests. The evolution of the actuation properties as the strain and the output force have been characterized as well. The long-term vacuuming, the freezing temperature and the Gamma radiations do not affect significantly the thermomechanical properties of conducting IPNs actuators. Only a slight decrease on actuation performances has been observed.

Development and evaluation of the Stingray, an amphibious maritime interdiction operations unmanned ground vehicle

NASA Astrophysics Data System (ADS)

Nguyen, Hoa G.; Castelli, Robin

2014-06-01

The U.S. Navy and Marine Corps conduct thousands of Maritime Interdiction Operations (MIOs) every year around the globe. Navy Visit, Board, Search, and Seizure (VBSS) teams regularly board suspect ships and perform search operations, often in hostile environments. There is a need for a small tactical robot that can be deployed ahead of the team to provide enhanced situational awareness in these boarding, breaching, and clearing operations. In 2011, the Space and Naval Warfare Systems Center Pacific conducted user evaluations on a number of small throwable robots and sensors, verified the requirements, and developed the key performance parameters (KPPs) for an MIO robot. Macro USA Corporation was then tasked to design and develop two prototype systems, each consisting of one control/display unit and two small amphibious Stingray robots. Technical challenges included the combination paddle wheel/shock-absorbing wheel, the tradeoff between impact resistance, size, and buoyancy, and achieving adequate traction on wet surfaces. This paper describes the technical design of these robots and the results of subsequent user evaluations by VBSS teams.

Joint Processing of Envelope Alignment and Phase Compensation for Isar Imaging

NASA Astrophysics Data System (ADS)

Chen, Tao; Jin, Guanghu; Dong, Zhen

2018-04-01

Range envelope alignment and phase compensation are spilt into two isolated parts in the classical methods of translational motion compensation in Inverse Synthetic Aperture Radar (ISAR) imaging. In classic method of the rotating object imaging, the two reference points of the envelope alignment and the Phase Difference (PD) estimation are probably not the same point, making it difficult to uncouple the coupling term by conducting the correction of Migration Through Resolution Cell (MTRC). In this paper, an improved approach of joint processing which chooses certain scattering point as the sole reference point is proposed to perform with utilizing the Prominent Point Processing (PPP) method. With this end in view, we firstly get the initial image using classical methods from which a certain scattering point can be chose. The envelope alignment and phase compensation using the selected scattering point as the same reference point are subsequently conducted. The keystone transform is thus smoothly applied to further improve imaging quality. Both simulation experiments and real data processing are provided to demonstrate the performance of the proposed method compared with classical method.

Association between childhood psychiatric disorders and psychotic experiences in adolescence: A population-based longitudinal study.

PubMed

Siebald, Caroline; Khandaker, Golam M; Zammit, Stanley; Lewis, Glyn; Jones, Peter B

2016-08-01

Adolescent psychotic experiences (PEs) are common, and are associated with both psychotic and non-psychotic illnesses. In order to examine psychopathological and cognitive antecedents of adolescent PEs, we have conducted a longitudinal study of common childhood psychiatric disorders and subsequent adolescent PEs in the population-based prospective ALSPAC birth cohort. Depression, anxiety, attention deficit hyperactivity disorder, oppositional defiant or conduct disorder, and pervasive developmental disorder were diagnosed according to DSM-IV criteria in 8253 participants at age 8years. IQ was assessed by WISC-III also at 8years. PEs, depressive and anxiety symptoms were assessed at 13years. Logistic regression calculated odds ratio (OR) for PEs at 13years associated with psychiatric disorders at 8years. Linear regression calculated mean difference in IQ between groups with and without psychiatric disorder. Mediating effects of IQ, mood and anxiety symptoms on the psychiatric disorder-PEs relationship were examined. In total, 599 children were assessed to have a DSM-IV psychiatric disorder at 8years (7.2%). These children compared with those without any psychiatric disorder performed worse on all measures of IQ; adjusted mean difference in total IQ -6.17 (95% CI, -7.86, -4.48). Childhood psychiatric disorders were associated with PEs subsequently in adolescence; adjusted OR 1.96 (95% CI, 1.47-2.68). The association between psychiatric disorder and subsequent PEs was partly mediated by, independently, IQ deficit at 8years and depressive and anxiety symptoms at 13years. The findings indicate that adolescent PEs are associated with general cognitive ability and past and present psychopathological factors. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Does resident ranking during recruitment accurately predict subsequent performance as a surgical resident?

PubMed

Fryer, Jonathan P; Corcoran, Noreen; George, Brian; Wang, Ed; Darosa, Debra

2012-01-01

While the primary goal of ranking applicants for surgical residency training positions is to identify the candidates who will subsequently perform best as surgical residents, the effectiveness of the ranking process has not been adequately studied. We evaluated our general surgery resident recruitment process between 2001 and 2011 inclusive, to determine if our recruitment ranking parameters effectively predicted subsequent resident performance. We identified 3 candidate ranking parameters (United States Medical Licensing Examination [USMLE] Step 1 score, unadjusted ranking score [URS], and final adjusted ranking [FAR]), and 4 resident performance parameters (American Board of Surgery In-Training Examination [ABSITE] score, PGY1 resident evaluation grade [REG], overall REG, and independent faculty rating ranking [IFRR]), and assessed whether the former were predictive of the latter. Analyses utilized Spearman correlation coefficient. We found that the URS, which is based on objective and criterion based parameters, was a better predictor of subsequent performance than the FAR, which is a modification of the URS based on subsequent determinations of the resident selection committee. USMLE score was a reliable predictor of ABSITE scores only. However, when we compared our worst residence performances with the performances of the other residents in this evaluation, the data did not produce convincing evidence that poor resident performances could be reliably predicted by any of the recruitment ranking parameters. Finally, stratifying candidates based on their rank range did not effectively define a ranking cut-off beyond which resident performance would drop off. Based on these findings, we recommend surgery programs may be better served by utilizing a more structured resident ranking process and that subsequent adjustments to the rank list generated by this process should be undertaken with caution. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Final Checks of Aquarius Instrument

NASA Image and Video Library

2011-04-29

Less than two months before launch, team members conduct their final checks of NASA Aquarius instrument at Vandenberg Air Force Base, Calif. Subsequent final instrument tests will be conducted on the launch pad.

AC electrothermal mixing for high conductive biofluids by arc-electrodes

NASA Astrophysics Data System (ADS)

Meng, Jiyu; Li, Shanshan; Li, Junwei; Yu, Chengzhuang; Wei, Chunyang; Dai, Shijie

2018-06-01

As a platform to mix the bioagents (i.e. serum, urine), we take advantage of the alternating current electrothermal (ACET) effect which is quite suitable for rapid pumping/mixing of high conductive biomicrofluids. Here we demonstrate the concept of a high-efficient mixing microfluidic chip as a basic unit to provide rapid mixing for lab-on-a-chip applications. As an active mixer, two streams are introduced into a ring-shape microchamber by a passive flow rate regulator, and then the microfluids in the chamber are actuated by a nonuniform electric field with a phase shift of 180°. It shows perfect mixing performance by arranging four arc-electrodes around the ring-shape microchamber subsequently. Taking the Joule heating and conductivity/permittivity changes into consideration, a temperature dependent fully coupled numerical model is presented. Then, the effects of applied voltages on mixing performance and temperature rise are provided to get an optimized design for ACET mixer. Moreover, the arrangement of the electrode array is analyzed to show the effects of electrode patterns on the swirls and mixing efficiencies. Since all the electrodes here are located along a ring-shape central microchamber, the ring-shape micromixer is quite suitable to function as a compact element modular for integrated microfluidic chips.

[Music therapy in different dental specialties].

PubMed

Mehr, Katarzyna; Wyganowska-Swiatkowska, Marzena; Kowalkowska, Iwona; Kurhańska-Flisykowska, Anna; Piotrowski, Paweł

2012-01-01

Music is generally recognized as the best and, in parallel, the simplest medium of communication. The music therapy, applied in various spheres linked to a therapeutic process, is particularly valued in rehabilitation, medicine, humanities and social sciences. Present study aimed at determination of usefulness of selected techniques of music therapy in different dental specialties. The studies were conducted on 81 generally healthy patients aging 18 to 62 years. Various planned dental procedures were performed first time or were appraised by the patients as unpleasant ones. On the basis of pilot studies, a stable scheme of the visits was established. At the beginning of the studies, music therapy according to Kierył was conducted. Subsequently, basing on description of Schwabe, a form of regulatory individual music therapy was conducted. Depending on psychoemotional condition of the patient, music programming was based on ISO and LEVEL principles, taking into account musical preferences of the patient and his/her age. After every visit the patients filled questionnaires and appropriate results, together with results of studies performed by the dentist, were subjected to statistical analysis. 1. Results of the studies encourage application of musicotherapeutic techniques in different dental specialties. 2. Dental visit can be made attractive and patient's visits in dental office can be facilitated with no significant financial input or organizational.

Comparison of Pharmacist and Physician Managed Annual Medicare Wellness Services.

PubMed

Sewell, Mary Jean; Riche, Daniel M; Fleming, Joshua W; Malinowski, Scott S; Jackson, R Terry

2016-12-01

Medicare Annual Wellness Visits (AWV) are a benefit provided for Medicare beneficiaries to increase focus on wellness and preventive measures. Pharmacists can conduct AWVs, which offers a potential avenue for outpatient revenue generation. To compare a composite of interventions and screenings and revenue generated by a pharmacist with those made by a physician during a subsequent AWV. A report generated through the electronic health record was used to determine AWVs conducted by a pharmacist or 3 participating physicians from December 2013 to March 2016, including revenue generated. Through electronic chart review, documentation was accessed to quantify and categorize the number and types of referrals, health advice, laboratory tests, procedures, vaccinations, and screenings that were recommended during each patient's AWV. The pharmacist performed 19 subsequent visits, and the 3 physicians performed 89 subsequent visits. Overall, the composite of interventions and screenings was significantly higher in the pharmacist group than the physician group (P = 0.03). More interventions were made in the areas of health advice (P = 0.020), vaccine recommendations (P = 0.009), and screenings in the pharmacist group (P < 0.001). The physicians ordered significantly more laboratory tests per visit (P < 0.001). The pharmacist was reimbursed on average $105 per visit versus $99 per visit for the physicians. Pharmacist-provided AWVs are at least comparable to those provided by physicians and offer an additional access point for valuable services for Medicare beneficiaries. There was no financial contribution to this study. Riche reports participation in the Speaker's Bureau for Merck and the Speaker's Bureau and Advisory Board for Novo Nordisk. The authors have no other conflicts of interest to report pertinent to this research. This data has not been previously published in any other location. Richie, Sewell, Malinowski, Jackson, and Fleming were involved in study design and manuscript preparation/approval. Jackson was involved in data collection, and Richie and Sewell were involved in data collection and data analysis. Sewell and Richie had full access to all the data in the study and take responsibility for the integrity of the data and the accuracy of the data analysis.

Mesoporous coaxial titanium nitride-vanadium nitride fibers of core-shell structures for high-performance supercapacitors.

PubMed

Zhou, Xinhong; Shang, Chaoqun; Gu, Lin; Dong, Shanmu; Chen, Xiao; Han, Pengxian; Li, Lanfeng; Yao, Jianhua; Liu, Zhihong; Xu, Hongxia; Zhu, Yuwei; Cui, Guanglei

2011-08-01

In this study, titanium nitride-vanadium nitride fibers of core-shell structures were prepared by the coaxial electrospinning, and subsequently annealed in the ammonia for supercapacitor applications. These core-shell (TiN-VN) fibers incorporated mesoporous structure into high electronic conducting transition nitride hybrids, which combined higher specific capacitance of VN and better rate capability of TiN. These hybrids exhibited higher specific capacitance (2 mV s(-1), 247.5 F g(-1)) and better rate capability (50 mV s(-1), 160.8 F g(-1)), which promise a good candidate for high-performance supercapacitors. It was also revealed by electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS) characterization that the minor capacitance fade originated from the surface oxidation of VN and TiN.

Nature gives us strength: exposure to nature counteracts ego-depletion.

PubMed

Chow, Jason T; Lau, Shun

2015-01-01

Previous research rarely investigated the role of physical environment in counteracting ego-depletion. In the present research, we hypothesized that exposure to natural environment counteracts ego-depletion. Three experiments were conducted to test this hypothesis. In Experiment 1, initially depleted participants who viewed pictures of nature scenes showed greater persistence on a subsequent anagram task than those who were given a rest period. Experiment 2 expanded upon this finding by showing that natural environment enhanced logical reasoning performance after ego-depleting task. Experiment 3 adopted a two- (depletion vs. no-depletion) -by-two (nature exposure vs. urban exposure) factorial design. We found that nature exposure moderated the effect of depletion on anagram task performance. Taken together, the present studies offer a viable and novel strategy to mitigate the negative impacts of ego-depletion.

Hall thruster with grooved walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li Hong; Ning Zhongxi; Yu Daren

2013-02-28

Axial-oriented and azimuthal-distributed grooves are formed on channel walls of a Hall thruster after the engine undergoes a long-term operation. Existing studies have demonstrated the relation between the grooves and the near-wall physics, such as sheath and electron near-wall transport. The idea to optimize the thruster performance with such grooves was also proposed. Therefore, this paper is devoted to explore the effects of wall grooves on the discharge characteristics of a Hall thruster. With experimental measurements, the variations on electron conductivity, ionization distribution, and integrated performance are obtained. The involved physical mechanisms are then analyzed and discussed. The findings helpmore » to not only better understand the working principle of Hall thruster discharge but also establish a physical fundamental for the subsequent optimization with artificial grooves.« less

Peer Rejection and Aggression and Early Starter Models of Conduct Disorder

PubMed Central

Miller-Johnson, Shari; Coie, John D.; Maumary-Gremaud, Anne; Bierman, Karen

2009-01-01

Peer rejection and aggression in the early school years were examined for their relevance to early starting conduct problems. The sample of 657 boys and girls from 4 geographical locations was followed from 1st through 4th grades. Peer rejection in 1st grade added incrementally to the prediction of early starting conduct problems in 3rd and 4th grades, over and above the effects of aggression. Peer rejection and aggression in 1st grade were also associated with the impulsive and emotionally reactive behaviors found in older samples. Being rejected by peers subsequent to 1st grade marginally added to the prediction of early starting conduct problems in 3rd and 4th grades, controlling for 1st grade ADHD symptoms and aggression. Furthermore, peer rejection partially mediated the predictive relation between early ADHD symptoms and subsequent conduct problems. These results support the hypothesis that the experience of peer rejection in the early school years adds to the risk for early starting conduct problems. PMID:12041708

Microstructured Electrolyte Membranes to Improve Fuel Cell Performance

NASA Astrophysics Data System (ADS)

Wei, Xue

Fuel cells, with the advantages of high efficiency, low greenhouse gas emission, and long lifetime are a promising technology for both portable power and stationary power sources. The development of efficient electrolyte membranes with high ionic conductivity, good mechanical durability and dense structure at low cost remains a challenge to the commercialization of fuel cells. This thesis focuses on exploring novel composite polymer membranes and ceramic electrolytes with the microstructure engineered to improve performance in direct methanol fuel cells (DMFCs) and solid oxide fuel cells (SOFCs), respectively. Polymer/particle composite membranes hold promise to meet the demands of DMFCs at lower cost. The structure of composite membranes was controlled by aligning proton conducting particles across the membrane thickness under an applied electric field. The field-induced structural changes caused the membranes to display an enhanced water uptake, proton conductivity, and methanol permeability in comparison to membranes prepared without an applied field. Although both methanol permeability and proton conductivity are enhanced by the applied field, the permeability increase is relatively lower than the proton conductivity improvement, which results in enhanced proton/methanol selectivity and improved DMFC performance. Apatite ceramics are a new class of fast ion conductors being studied as alternative SOFC electrolytes in the intermediate temperature range. An electrochemical/hydrothermal deposition method was developed to grow fully dense apatite membranes containing well-developed crystals with c-axis alignment to promote ion conductivity. Hydroxyapatite seed crystals were first deposited onto a metal substrate electrochemically. Subsequent ion substitution during the hydrothermal growth process promoted the formation of dense, fully crystalline films with microstructure optimal for ion transport. The deposition parameters were systematically investigated, such as reactant type, reagent concentration, solution pH, and reaction time. Dense apatite films were formed on palladium substrates that can serve as intermediate temperature fuel cell anodes. The novel apatite membrane structure is promising for fuel cell applications, as well as in improving the biocompatibility of orthopedic implants when coated on stainless steel or titanium substrates.

Incidence of gastric dilatation-volvulus following a splenectomy in 238 dogs.

PubMed

Maki, Lynn C; Males, Kristina N; Byrnes, Madeline J; El-Saad, Anthony A; Coronado, George S

2017-12-01

There is contradicting information in the veterinary literature regarding canine splenectomy and the increased risk for subsequent gastric dilatation-volvulus. The main purpose of this study was to determine the rate of occurrence of gastric dilatation-volvulus following splenectomy in medium to large breed dogs compared with a control group undergoing other abdominal procedures. Follow-up was performed by reviewing the medical records and conducting phone interviews. Weight, gender, and presence of a hemoabdomen at the time of surgery were not significantly associated with occurrence of gastric dilatation-volvulus, while increasing age was. Ten of 238 (4%) dogs in the splenectomy group and 3/209 (1.4%) dogs in the control group subsequently developed gastric dilatation-volvulus, which was not significantly different ( P = 0.08). While the findings approach significance and support a need for future investigation, the current recommendation for gastropexy at time of splenic removal should be made on a case by case basis and while considering previously documented risk factors.

Selected Examples of NACA/NASA Supersonic Flight Research

NASA Technical Reports Server (NTRS)

Saltzman, Edwin J.; Ayers, Theodore G.

1995-01-01

The present Dryden Flight Research Center, a part of the National Aeronautics and Space Administration, has a flight research history that extends back to the mid-1940's. The parent organization was a part of the National Advisory Committee for Aeronautics and was formed in 1946 as the Muroc Flight Test Unit. This document describes 13 selected examples of important supersonic flight research conducted from the Mojave Desert location of the Dryden Flight Research Center over a 4 decade period beginning in 1946. The research described herein was either obtained at supersonic speeds or enabled subsequent aircraft to penetrate or traverse the supersonic region. In some instances there accrued from these research efforts benefits which are also applicable at lower or higher speed regions. A major consideration in the selection of the various research topics was the lasting impact they have had, or will have, on subsequent supersonic flight vehicle design, efficiency, safety, and performance or upon improved supersonic research techniques.

A subsequent closed-form description of propagated signaling phenomena in the membrane of an axon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melendy, Robert F., E-mail: rfmelendy@liberty.edu

2016-05-15

I recently introduced a closed-form description of propagated signaling phenomena in the membrane of an axon [R.F. Melendy, Journal of Applied Physics 118, 244701 (2015)]. Those results demonstrate how intracellular conductance, the thermodynamics of magnetization, and current modulation, function together in generating an action potential in a unified, closed-form description. At present, I report on a subsequent closed-form model that unifies intracellular conductance and the thermodynamics of magnetization, with the membrane electric field, E{sub m}. It’s anticipated this work will compel researchers in biophysics, physical biology, and the computational neurosciences, to probe deeper into the classical and quantum features ofmore » membrane magnetization and signaling, informed by the computational features of this subsequent model.« less

The Nano-Sat Exo-Brake Experiment: Status of the First Controlled De-Orbit (and Subsequent Experiments)

NASA Technical Reports Server (NTRS)

Murbach, M.; Guarneros Luna, A.; Alena, R.; Papadopoulos, P.; Stone, T.; Tanner, A.; Wheless, J.; Priscal, C.; Dono Perez, A.; Cianciolo, A;

Very high pressure liquid chromatography using fully porous particles: quantitative analysis of fast gradient separations without post-run times.

PubMed

Stankovich, Joseph J; Gritti, Fabrice; Stevenson, Paul G; Beaver, Lois Ann; Guiochon, Georges

2014-01-10

Using a column packed with fully porous particles, four methods for controlling the flow rates at which gradient elution runs are conducted in very high pressure liquid chromatography (VHPLC) were tested to determine whether reproducible thermal conditions could be achieved, such that subsequent analyses would proceed at nearly the same initial temperature. In VHPLC high flow rates are achieved, producing fast analyses but requiring high inlet pressures. The combination of high flow rates and high inlet pressures generates local heat, leading to temperature changes in the column. Usually in this case a post-run time is input into the analytical method to allow the return of the column temperature to its initial state. An alternative strategy involves operating the column without a post-run equilibration period and maintaining constant temperature variations for subsequent analysis after conducting one or a few separations to bring the column to a reproducible starting temperature. A liquid chromatography instrument equipped with a pressure controller was used to perform constant pressure and constant flow rate VHPLC separations. Six replicate gradient separations of a nine component mixture consisting of acetophenone, propiophenone, butyrophenone, valerophenone, hexanophenone, heptanophenone, octanophenone, benzophenone, and acetanilide dissolved in water/acetonitrile (65:35, v/v) were performed under various experimental conditions: constant flow rate, two sets of constant pressure, and constant pressure operation with a programmed flow rate. The relative standard deviations of the response factors for all the analytes are lower than 5% across the methods. Programming the flow rate to maintain a fairly constant pressure instead of using instrument controlled constant pressure improves the reproducibility of the retention times by a factor of 5, when plotting the chromatograms in time. Copyright © 2013 Elsevier B.V. All rights reserved.

Transparent conducting oxide-free nitrogen-doped graphene/reduced hydroxylated carbon nanotube composite paper as flexible counter electrodes for dye-sensitized solar cells

NASA Astrophysics Data System (ADS)

Zhang, Jindan; Yu, Mei; Li, Songmei; Meng, Yanbing; Wu, Xueke; Liu, Jianhua

2016-12-01

Three-dimensional nitrogen-doped graphene/reduced hydroxylated carbon nanotube composite aerogel (NG/CNT-OH) with unique hierarchical porosity and mechanical stability is developed through a two-step hydrothermal reaction. With plenty of exposed active sites and efficient multidimensional transport pathways of electrons and ions, NG/CNT-OH exhibits great electrocatalytic performances for I-/I3- redox couple. The subsequent compressed NG/CNT-OH papers possess high electrical conductivity and good flexibility, thus generating high-performance flexible counter electrodes (CEs) with transparent conducting oxide free (TCO-free) for dye-sensitized solar cells (DSSCs). The flexible NG/CNT-OH electrodes show good stability and the DSSCs with the optimized NG/CNT-OH CE had higher short-circuit current density (13.62 mA cm-2) and cell efficiency (6.36%) than DSSCs using Pt CE, whereas those of the DSSCs using Pt CE were only 12.81 mA cm-2 and 5.74%, respectively. Increasing the ratio of hydroxylated carbon nanotubes (CNT-OH) to the graphene oxide (GO) in the reactant would lead to less content of doped N, but better diffusion of electrolyte in the CEs because of more complete GO etching reaction. The design strategy presents a facile and cost effective way to synthesis three-dimensional graphene/CNT composite aerogel with excellent performance, and it can be potentially used as flexible TCO-free CE in other power conversion or energy storage devices.

Quantifying plant age and available water effects on soybean leaf conductance

USDA-ARS?s Scientific Manuscript database

In this study, we present data characterizing the effects of soil moisture levels on total leaf conductance for two distinct determinate soybean (Glycine max (L.) Merr.) genotypes and subsequently use these data to formulate and validate a model that characterizes total leaf conductance. Conductanc...

Individual perception of recovery is related to subsequent sprint performance.

PubMed

Cook, Christian J; Beaven, Chris Martyn

2013-07-01

Training recovery is vital for adaptation and performance, and to avoid cumulative fatigue and symptoms associated with overtraining. The use of cold-water immersion (CWI) as a recovery strategy is common; however, the physiological and biochemical rationale behind its use remains unclear. This study aimed to assess the relationship between body temperature responses to water immersion and individual perception of recovery, with subsequent exercise performance. Twelve male rugby players participated in a 3-week cross-over trial where an intense 60 min conditioning session was followed immediately by 15 min of either 14°C CWI, 30°C warm-water immersion (WWI) or passive control (CON) recovery intervention. Postexercise body temperatures and subjective ratings of the recovery intervention were recorded and subsequently related to performance in a 5×40 m repeated sprint protocol undertaken 24 h later. CWI induced large reductions in core body temperature postimmersion (effect size (ES) range 1.05-3.21) and improved subsequent sprint performance compared to WWI (ES 1.04±0.84) and CON (ES 1.44±0.84). Both the degree of temperature decrease at 60 min postimmersion (r=0.6948; p=0.0121) and the subjective rating of the recovery intervention (r=0.5886; p=0.0441) were related to subsequent sprint performance. A very strong linear correlation was observed when these two factors were integrated (r=0.7743; p=0.0031). A combination of physiological and psychological indices provides an improved indication of subsequent performance and suggests an important role of individual perception in enhancing training recovery.

Performance Analysis, Design Considerations, and Applications of Extreme-Scale In Situ Infrastructures

DOE PAGES

Ayachit, Utkarsh; Bauer, Andrew; Duque, Earl P. N.; ...

2016-11-01

A key trend facing extreme-scale computational science is the widening gap between computational and I/O rates, and the challenge that follows is how to best gain insight from simulation data when it is increasingly impractical to save it to persistent storage for subsequent visual exploration and analysis. One approach to this challenge is centered around the idea of in situ processing, where visualization and analysis processing is performed while data is still resident in memory. Our paper examines several key design and performance issues related to the idea of in situ processing at extreme scale on modern platforms: Scalability, overhead,more » performance measurement and analysis, comparison and contrast with a traditional post hoc approach, and interfacing with simulation codes. We illustrate these principles in practice with studies, conducted on large-scale HPC platforms, that include a miniapplication and multiple science application codes, one of which demonstrates in situ methods in use at greater than 1M-way concurrency.« less

The influence of autostereoscopic 3D displays on subsequent task performance

NASA Astrophysics Data System (ADS)

Barkowsky, Marcus; Le Callet, Patrick

2010-02-01

Viewing 3D content on an autostereoscopic is an exciting experience. This is partly due to the fact that the 3D effect is seen without glasses. Nevertheless, it is an unnatural condition for the eyes as the depth effect is created by the disparity of the left and the right view on a flat screen instead of having a real object at the corresponding location. Thus, it may be more tiring to watch 3D than 2D. This question is investigated in this contribution by a subjective experiment. A search task experiment is conducted and the behavior of the participants is recorded with an eyetracker. Several indicators both for low level perception as well as for the task performance itself are evaluated. In addition two optometric tests are performed. A verification session with conventional 2D viewing is included. The results are discussed in detail and it can be concluded that the 3D viewing does not have a negative impact on the task performance used in the experiment.

Effect of Glycemic Index of Breakfast on Energy Intake at Subsequent Meal among Healthy People: A Meta-Analysis

PubMed Central

Sun, Feng-Hua; Li, Chunxiao; Zhang, Yan-Jie; Wong, Stephen Heung-Sang; Wang, Lin

2016-01-01

Meals with low glycemic index (GI) may suppress short-term appetite and reduce subsequent food intake compared with high-GI meals. However, no meta-analysis has been conducted to synthesize the evidence. This meta-analytic study was conducted to assess the effect of high- and low-GI breakfast on subsequent short-term food intake. Trials were identified through MEDLINE, EMBASE, Web of Science, and Cochrane Central Register of Controlled trials, and manual searches of bibliographies until May 2015. Randomized controlled and cross-over trials comparing the effect of low- with high-GI breakfast on subsequent energy intake among healthy people were included. Nine studies consisting of 11 trials met the inclusion criteria. Only one trial was classified with high methodological quality. A total of 183 participants were involved in the trials. The meta-analytic results revealed no difference in breakfast GI (high-GI vs. low-GI) on subsequent short-term energy intake. In conclusion, it seems that breakfast GI has no effect on short-term energy intake among healthy people. However, high quality studies are still warranted to provide more concrete evidence. PMID:26742058

The Association Between Cognitive Function and Subsequent Depression: A Systematic Review and Meta-Analysis

PubMed Central

Scult, Matthew A.; Paulli, Athelia R.; Mazure, Emily S.; Moffitt, Terrie E.; Hariri, Ahmad R.; Strauman, Timothy J.

2016-01-01

Despite a growing interest in understanding the cognitive deficits associated with major depressive disorder (MDD), it is largely unknown whether such deficits exist before disorder onset or how they might influence the severity of subsequent illness. The purpose of the present study was to conduct a systematic review and meta-analysis of longitudinal datasets to determine whether cognitive function acts as a predictor of later MDD diagnosis or change in depression symptoms. Eligible studies included longitudinal designs with baseline measures of cognitive functioning, and later unipolar MDD diagnosis or symptom assessment. The systematic review identified 29 publications, representing 34 unique samples, and 121,749 participants, that met the inclusion/exclusion criteria. Quantitative meta-analysis demonstrated that higher cognitive function was associated with decreased levels of subsequent depression (r=−0.088; 95% CI: −0.121, −0.054; p<0.001). However, sensitivity analyses revealed that this association is likely driven by concurrent depression symptoms at the time of cognitive assessment. Our review and meta-analysis indicate that the association between lower cognitive function and later depression is confounded by the presence of contemporaneous depression symptoms at the time of cognitive assessment. Thus, cognitive deficits predicting MDD likely represent deleterious effects of subclinical depression symptoms on performance rather than premorbid risk factors for disorder. PMID:27624847

Somatic mutations in benign breast disease tissue and risk of subsequent invasive breast cancer.

PubMed

Rohan, Thomas E; Miller, Christopher A; Li, Tiandao; Wang, Yihong; Loudig, Olivier; Ginsberg, Mindy; Glass, Andrew; Mardis, Elaine

2018-06-06

Insights into the molecular pathogenesis of breast cancer might come from molecular analysis of tissue from early stages of the disease. We conducted a case-control study nested in a cohort of women who had biopsy-confirmed benign breast disease (BBD) diagnosed between 1971 and 2006 at Kaiser Permanente Northwest and who were followed to mid-2015 to ascertain subsequent invasive breast cancer (IBC); cases (n = 218) were women with BBD who developed subsequent IBC and controls, individually matched (1:1) to cases, were women with BBD who did not develop IBC in the same follow-up interval as that for the corresponding case. Targeted sequence capture and sequencing were performed for 83 genes of importance in breast cancer. There were no significant case-control differences in mutation burden overall, for non-silent mutations, for individual genes, or with respect either to the nature of the gene mutations or to mutational enrichment at the pathway level. For seven subjects with DNA from the BBD and ipsilateral IBC, virtually no mutations were shared. This study, the first to use a targeted multi-gene sequencing approach on early breast cancer precursor lesions to investigate the genomic basis of the disease, showed that somatic mutations detected in BBD tissue were not associated with breast cancer risk.

Incorporation of Hands-On Sterile Technique Instruction in an Introductory Pharmacy Practice Experience

PubMed Central

Cruthirds, Danielle; Coward, Lori

2015-01-01

Objective. To examine sterile technique and basic sterile compounding procedures among third-year pharmacy students. Design. Third year pharmacy students participating in an introductory pharmacy practice experience (IPPE) in 2012 (n=126) and 2013 (n=119) performed a modified low-risk compounded sterile product (CSP) media fill challenge test, then prepared a 5 mg/mL vancomycin solution that was subsequently analyzed for accuracy. Assessment. To identify deficiencies in sterile procedures, students were observed while performing a modified low-risk CSP media fill challenge test. In the first year of conducting the challenge test (2012), 3 deficiencies were identified: hand washing before compounding, cleaning items with alcohol prior to start, and cleaning work area upon completion. In 2013, significant improvements were observed in these 3 areas after students watched a demonstration video. Examination of CSPs revealed less than 1% contamination in both years. Analysis of compounded vancomycin solutions showed that 84% and 71% of students prepared solutions in 2012 and 2013, respectively, were within 10% of the targeted final concentration. Conclusion. Hands-on sterile compounding exercises are typically delivered early in the pharmacy professional curriculum with minimal reinforcement in subsequent years. Providing opportunities for advanced pharmacy students to refresh and practice sterile compounding procedures allows students to refine their skills before entering pharmacy practice. PMID:25861109

Effect of dactyloscopic powders on DNA profiling from enhanced fingerprints: results from an experimental study.

PubMed

Tozzo, Pamela; Giuliodori, Alice; Rodriguez, Daniele; Caenazzo, Luciana

2014-03-01

We conducted a study on the effect of fingerprint enhancement methods on subsequent short tandem repeat profiling. First, we performed a study typing blood traces deposited on 5 different surfaces, treated with 8 types of dactyloscopic powders. Three different DNA extraction methods were used. Subsequently, we analyzed latent fingerprints on the same 5 surfaces enhanced with the 8 different powders used in the first part of the study. This study has demonstrated that DNA profiling can be performed on fingerprints left on different substrates, and the substrate will affect the amount of DNA that can be recovered for DNA typing. In the first phase of the study, a profile was obtained in 92% of the 120 samples analyzed; in the second part, in 55% of the 80 samples analyzed, we obtained a profile complete in 32.5% of the cases. From the results obtained, it seems that the powders used in latent fingerprints enhancement, rather than having a direct inhibitory effect on extraction and amplification of DNA, may cause partial degradation of DNA, reducing the efficiency of amplification reaction. It should not be forgotten that these results were obtained under laboratory conditions, and in real caseworks, there may still be different problems involved.

MeV Si ion modifications on the thermoelectric generators from Si/Si + Ge superlattice nano-layered films

NASA Astrophysics Data System (ADS)

Budak, S.; Heidary, K.; Johnson, R. B.; Colon, T.; Muntele, C.; Ila, D.

2014-08-01

The performance of thermoelectric materials and devices is characterized by a dimensionless figure of merit, ZT = S2σT/K, where, S and σ denote, respectively, the Seebeck coefficient and electrical conductivity, T is the absolute temperature in Kelvin and K represents the thermal conductivity. The figure of merit may be improved by means of raising either S or σ or by lowering K. In our laboratory, we have fabricated and characterized the performance of a large variety of thermoelectric generators (TEG). Two TEG groups comprised of 50 and 100 alternating layers of Si/Si + Ge multi-nanolayered superlattice films have been fabricated and thoroughly characterized. Ion beam assisted deposition (IBAD) was utilized to assemble the alternating sandwiched layers, resulting in total thickness of 300 nm and 317 nm for 50 and 100 layer devices, respectively. Rutherford Backscattering Spectroscopy (RBS) was employed in order to monitor the precise quantity of Si and Ge utilized in the construction of specific multilayer thin films. The material layers were subsequently impregnated with quantum dots and/or quantum clusters, in order to concurrently reduce the cross plane thermal conductivity, increase the cross plane Seebeck coefficient and raise the cross plane electrical conductivity. The quantum dots/clusters were implanted via the 5 MeV Si ion bombardment which was performed using a Pelletron high energy ion beam accelerator. We have achieved remarkable results for the thermoelectric and optical properties of the Si/Si + Ge multilayer thin film TEG systems. We have demonstrated that with optimal setting of the 5 MeV Si ion beam bombardment fluences, one can fabricate TEG systems with figures of merits substantially higher than the values previously reported.

Essential fatty acid supplementation during lactation is required to maximize the subsequent reproductive performance of the modern sow.

PubMed

Rosero, David S; Boyd, R Dean; McCulley, Mark; Odle, Jack; van Heugten, Eric

2016-05-01

This study was conducted to investigate the effects of supplemental essential fatty acids (EFA) on sow reproductive efficiency and to estimate the concentrations of EFA required by the lactating sow for maximum subsequent reproduction. Data were collected on 480 sows (PIC Camborough) balanced by parity, with 241 and 239 sows representing Parity 1, and 3-5 (P3+), respectively. Sows were assigned randomly, within parity, to a 3 × 3 factorial arrangement plus a control diet without added lipids. Factors included linoleic (2.1%, 2.7%, and 3.3%) and α-linolenic acid (0.15%, 0.30%, and 0.45%), obtained by adding 4% of different mixtures of canola, corn and flaxseed oils to diets. Diets were corn-soybean meal based with 12% wheat middlings. The benefits of supplemental EFA were more evident for the subsequent reproduction of mature P3+ sows. For these sows, supplemental α-linolenic acid improved the proportion of sows that farrowed relative to sows weaned (linear P=0.080; 82.8, 80.5, and 92.8% for sows fed 0.15%, 0.30%, and 0.45% α-linolenic acid, respectively). In addition, supplemental linoleic acid, fed to Parity 1 and P3+ sows, tended to increase subsequent litter size (linear P=0.074; 13.2, 13.8 and 14.0 total pigs born for 2.1%, 2.7% and 3.3% linoleic acid, respectively). These results demonstrate that a minimum dietary intake of both α-linolenic and linoleic acid is required for the modern lactating sow to achieve a maximum reproductive outcome through multiple mechanisms that include rapid return to estrus, increased maintenance of pregnancy and improved subsequent litter size. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of stillbirth and dystocia on subsequent reproductive performance in Japanese Black cattle.

PubMed

Sasaki, Yosuke; Uematsu, Mizuho; Kitahara, Go; Osawa, Takeshi; Sueyoshi, Masuo

2014-06-01

The objective of this study was to determine the effects of stillbirth and dystocia on subsequent reproductive performance in Japanese Black cattle. Data were collected for 34,763 calvings from 13,186 animals on 826 farms. Stillbirth was associated with a decreased first service conception rate compared to cows with a normal calving (44.4 versus 54.0%, respectively, P < 0.001). Cows with a normal calving required fewer artificial inseminations per conception and had a lower stillbirth rate at subsequent parity than those with stillbirth and dystocia (P < 0.001). Japanese Black cows with stillbirth and dystocia had inferior subsequent reproductive performance compared with those with a normal calving. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparison of graduate-entry and direct school leaver student performance on an applied dental knowledge test.

PubMed

Ali, K; Zahra, D; Tredwin, C

2017-11-01

To compare the academic performance of graduate-entry and direct school leavers in an undergraduate dental programme. This study examined the results of students in applied dental knowledge (ADK) progress tests conducted during two academic years. A mixed model analysis of variance (ANOVA) was conducted to compare the performance of graduate-entry and direct school leavers. ADK was treated as a repeated measures variable, and the outcome variable of interest was percentage score on the ADK. The results show statistically significant main effects for ADK [F (1,113) = 61.58, P < 0.001, η 2 p = 0.35], Cohort [F (1,113) = 88.57, P < 0.001, η 2 p = 0.44] and Entry [F (1,113) = 11.31, P = 0.001, η 2 p = 0.09]. That is, students do better on each subsequent test (main effect of ADK), students in later years of the programme perform better than those in earlier years (main effect of cohort), and graduate-entry students outperform direct school leavers. This is the first study to explore the differences in the academic performance of graduate-entry and direct school leavers in an undergraduate dental programme. The results show that the academic performance of graduate students was better than the direct school leavers in years 2 and 3. Further research is required to compare the performance of students longitudinally across the entire duration of undergraduate dental programmes and evaluate whether this difference persists throughout. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An adaptive scale factor based MPPT algorithm for changing solar irradiation levels in outer space

NASA Astrophysics Data System (ADS)

Kwan, Trevor Hocksun; Wu, Xiaofeng

2017-03-01

Maximum power point tracking (MPPT) techniques are popularly used for maximizing the output of solar panels by continuously tracking the maximum power point (MPP) of their P-V curves, which depend both on the panel temperature and the input insolation. Various MPPT algorithms have been studied in literature, including perturb and observe (P&O), hill climbing, incremental conductance, fuzzy logic control and neural networks. This paper presents an algorithm which improves the MPP tracking performance by adaptively scaling the DC-DC converter duty cycle. The principle of the proposed algorithm is to detect the oscillation by checking the sign (ie. direction) of the duty cycle perturbation between the current and previous time steps. If there is a difference in the signs then it is clear an oscillation is present and the DC-DC converter duty cycle perturbation is subsequently scaled down by a constant factor. By repeating this process, the steady state oscillations become negligibly small which subsequently allows for a smooth steady state MPP response. To verify the proposed MPPT algorithm, a simulation involving irradiances levels that are typically encountered in outer space is conducted. Simulation and experimental results prove that the proposed algorithm is fast and stable in comparison to not only the conventional fixed step counterparts, but also to previous variable step size algorithms.

Staghorn: An Automated Large-Scale Distributed System Analysis Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabert, Kasimir; Burns, Ian; Elliott, Steven

2016-09-01

Conducting experiments on large-scale distributed computing systems is becoming significantly easier with the assistance of emulation. Researchers can now create a model of a distributed computing environment and then generate a virtual, laboratory copy of the entire system composed of potentially thousands of virtual machines, switches, and software. The use of real software, running at clock rate in full virtual machines, allows experiments to produce meaningful results without necessitating a full understanding of all model components. However, the ability to inspect and modify elements within these models is bound by the limitation that such modifications must compete with the model,more » either running in or alongside it. This inhibits entire classes of analyses from being conducted upon these models. We developed a mechanism to snapshot an entire emulation-based model as it is running. This allows us to \\freeze time" and subsequently fork execution, replay execution, modify arbitrary parts of the model, or deeply explore the model. This snapshot includes capturing packets in transit and other input/output state along with the running virtual machines. We were able to build this system in Linux using Open vSwitch and Kernel Virtual Machines on top of Sandia's emulation platform Firewheel. This primitive opens the door to numerous subsequent analyses on models, including state space exploration, debugging distributed systems, performance optimizations, improved training environments, and improved experiment repeatability.« less

Improved military air traffic controller selection methods as measured by subsequent training performance.

PubMed

Carretta, Thomas R; King, Raymond E

2008-01-01

Over the past decade, the U.S. military has conducted several studies to evaluate determinants of enlisted air traffic controller (ATC) performance. Research has focused on validation of the Armed Services Vocational Aptitude Battery (ASVAB) and has shown it to be a good predictor of training performance. Despite this, enlisted ATC training and post-training attrition is higher than desirable, prompting interest in alternate selection methods to augment current procedures. The current study examined the utility of the FAA Air Traffic Selection and Training (AT-SAT) battery for incrementing the predictiveness of the ASVAB versus several enlisted ATC training criteria. Subjects were 448 USAF enlisted ATC students who were administered the ASVAB and FAA AT-SAT subtests and subsequently graduated or were eliminated from apprentice-level training. Training criteria were a dichotomous graduation/elimination training score, average ATC fundamentals course score, and FAA certified tower operator test score. Results confirmed the predictive validity of the ASVAB and showed that one of the AT-SAT subtests resembling a low-fidelity ATC work sample significantly improved prediction of training performance beyond the ASVAB alone. Results suggested training attrition could be reduced by raising the current ASVAB minimum qualifying score. However, this approach may make it difficult to identify sufficient numbers of trainees and lead to adverse impact. Although the AT-SAT ATC work sample subtest showed incremental validity to the ASVAB, its length (95 min) may be problematic in operational testing. Recommendations are made for additional studies to address issues affecting operational implementation.

Gravity Effect on Capillary Limit in a Miniature Loop Heat Pipe with Multiple Evaporators and Multiple Condensers

NASA Technical Reports Server (NTRS)

Nagano, Hosei; Ku, Jentung

2007-01-01

This paper describes the gravity effect on heat transport characteristics in a minia6re loop heat pipe with multiple evaporators and multiple condensers. Tests were conducted in three different orientations: horizontal, 45deg tilt, and vertical. The gravity affected the loop's natural operating temperature, the maximum heat transport capability, and the thermal conductance. In the case that temperatures of compensation chambers were actively controlled, the required control heater power was also dependent on the test configuration. In the vertical configuration, the secondary wick was not able to pump the liquid from the CC to the evaporator against the gravity. Thus the loop could operate stably or display some peculiar behaviors depending on the initial liquid distribution between the evaporator and the CC. Because such an initial condition was not known prior to the test, the subsequent loop performance was unpredictable.

Graphene chiral liquid crystals and macroscopic assembled fibres

PubMed Central

Xu, Zhen; Gao, Chao

2011-01-01

Chirality and liquid crystals are both widely expressed in nature and biology. Helical assembly of mesophasic molecules and colloids may produce intriguing chiral liquid crystals. To date, chiral liquid crystals of 2D colloids have not been explored. As a typical 2D colloid, graphene is now receiving unprecedented attention. However, making macroscopic graphene fibres is hindered by the poor dispersibility of graphene and by the lack of an assembly method. Here we report that soluble, chemically oxidized graphene or graphene oxide sheets can form chiral liquid crystals in a twist-grain-boundary phase-like model with simultaneous lamellar ordering and long-range helical frustrations. Aqueous graphene oxide liquid crystals were continuously spun into metres of macroscopic graphene oxide fibres; subsequent chemical reduction gave the first macroscopic neat graphene fibres with high conductivity and good mechanical performance. The flexible, strong graphene fibres were knitted into designed patterns and into directionally conductive textiles. PMID:22146390

Theory and simulation of ion conduction in the pentameric GLIC channel.

PubMed

Zhu, Fangqiang; Hummer, Gerhard

2012-10-09

GLIC is a bacterial member of the large family of pentameric ligand-gated ion channels. To study ion conduction through GLIC and other membrane channels, we combine the one-dimensional potential of mean force for ion passage with a Smoluchowski diffusion model, making it possible to calculate single-channel conductance in the regime of low ion concentrations from all-atom molecular dynamics (MD) simulations. We then perform MD simulations to examine sodium ion conduction through the GLIC transmembrane pore in two systems with different bulk ion concentrations. The ion potentials of mean force, calculated from umbrella sampling simulations with Hamiltonian replica exchange, reveal a major barrier at the hydrophobic constriction of the pore. The relevance of this barrier for ion transport is confirmed by a committor function that rises sharply in the barrier region. From the free evolution of Na(+) ions starting at the barrier top, we estimate the effective diffusion coefficient in the barrier region, and subsequently calculate the conductance of the pore. The resulting diffusivity compares well with the position-dependent ion diffusion coefficient obtained from restrained simulations. The ion conductance obtained from the diffusion model agrees with the value determined via a reactive-flux rate calculation. Our results show that the conformation in the GLIC crystal structure, with an estimated conductance of ~1 picosiemens at 140 mM ion concentration, is consistent with a physiologically open state of the channel.

Does the presence of priming hinder subsequent recognition or recall performance?

PubMed

Stark, Shauna M; Gordon, Barry; Stark, Craig E L

2008-02-01

Declarative and non-declarative memories are thought be supported by two distinct memory systems that are often posited not to interact. However, Wagner, Maril, and Schacter (2000a) reported that at the time priming was assessed, greater behavioural and neural priming was associated with lower levels of subsequent recognition memory, demonstrating an interaction between declarative and non-declarative memory. We examined this finding using a similar paradigm, in which participants made the same or different semantic word judgements following a short or long lag and subsequent memory test. We found a similar overall pattern of results, with greater behavioural priming associated with a decrease in recognition and recall performance. However, neither various within-participant nor various between-participant analyses revealed significant correlations between priming and subsequent memory performance. These data suggest that both lag and task have effects on priming and declarative memory performance, but that they are largely independent and occur in parallel.

Model-OA wind turbine generator - Failure modes and effects analysis

NASA Technical Reports Server (NTRS)

Klein, William E.; Lali, Vincent R.

1990-01-01

The results failure modes and effects analysis (FMEA) conducted for wind-turbine generators are presented. The FMEA was performed for the functional modes of each system, subsystem, or component. The single-point failures were eliminated for most of the systems. The blade system was the only exception. The qualitative probability of a blade separating was estimated at level D-remote. Many changes were made to the hardware as a result of this analysis. The most significant change was the addition of the safety system. Operational experience and need to improve machine availability have resulted in subsequent changes to the various systems, which are also reflected in this FMEA.

Model 0A wind turbine generator FMEA

NASA Technical Reports Server (NTRS)

Klein, William E.; Lalli, Vincent R.

1989-01-01

The results of Failure Modes and Effects Analysis (FMEA) conducted for the Wind Turbine Generators are presented. The FMEA was performed for the functional modes of each system, subsystem, or component. The single-point failures were eliminated for most of the systems. The blade system was the only exception. The qualitative probability of a blade separating was estimated at level D-remote. Many changes were made to the hardware as a result of this analysis. The most significant change was the addition of the safety system. Operational experience and need to improve machine availability have resulted in subsequent changes to the various systems which are also reflected in this FMEA.

The Peacock versus the louse (pediculus humanus corporis): one soldier's contribution to combating trench fever in the First World War.

PubMed

Peacock, A; Pearson, W

2010-09-01

Trench fever became a major worry for the Allied High Command during the First World War because of its debilitating effects on troop performance. The causes of the fever were not previously known, but entomological research identified the body louse (pediculus humanus corporis) as the carrier, and the Royal Army Medical Corps developed effective methods of control through disinfestation. These were markedly influenced by the researches of a young entomologist, Alexander David Peacock, which were conducted under campaign conditions. Peacock subsequently occupied a Chair of Zoology at St. Andrews University for 30 years.

Application of the Linux cluster for exhaustive window haplotype analysis using the FBAT and Unphased programs.

PubMed

Mishima, Hiroyuki; Lidral, Andrew C; Ni, Jun

2008-05-28

Genetic association studies have been used to map disease-causing genes. A newly introduced statistical method, called exhaustive haplotype association study, analyzes genetic information consisting of different numbers and combinations of DNA sequence variations along a chromosome. Such studies involve a large number of statistical calculations and subsequently high computing power. It is possible to develop parallel algorithms and codes to perform the calculations on a high performance computing (HPC) system. However, most existing commonly-used statistic packages for genetic studies are non-parallel versions. Alternatively, one may use the cutting-edge technology of grid computing and its packages to conduct non-parallel genetic statistical packages on a centralized HPC system or distributed computing systems. In this paper, we report the utilization of a queuing scheduler built on the Grid Engine and run on a Rocks Linux cluster for our genetic statistical studies. Analysis of both consecutive and combinational window haplotypes was conducted by the FBAT (Laird et al., 2000) and Unphased (Dudbridge, 2003) programs. The dataset consisted of 26 loci from 277 extended families (1484 persons). Using the Rocks Linux cluster with 22 compute-nodes, FBAT jobs performed about 14.4-15.9 times faster, while Unphased jobs performed 1.1-18.6 times faster compared to the accumulated computation duration. Execution of exhaustive haplotype analysis using non-parallel software packages on a Linux-based system is an effective and efficient approach in terms of cost and performance.

Application of the Linux cluster for exhaustive window haplotype analysis using the FBAT and Unphased programs

PubMed Central

Mishima, Hiroyuki; Lidral, Andrew C; Ni, Jun

2008-01-01

Background Genetic association studies have been used to map disease-causing genes. A newly introduced statistical method, called exhaustive haplotype association study, analyzes genetic information consisting of different numbers and combinations of DNA sequence variations along a chromosome. Such studies involve a large number of statistical calculations and subsequently high computing power. It is possible to develop parallel algorithms and codes to perform the calculations on a high performance computing (HPC) system. However, most existing commonly-used statistic packages for genetic studies are non-parallel versions. Alternatively, one may use the cutting-edge technology of grid computing and its packages to conduct non-parallel genetic statistical packages on a centralized HPC system or distributed computing systems. In this paper, we report the utilization of a queuing scheduler built on the Grid Engine and run on a Rocks Linux cluster for our genetic statistical studies. Results Analysis of both consecutive and combinational window haplotypes was conducted by the FBAT (Laird et al., 2000) and Unphased (Dudbridge, 2003) programs. The dataset consisted of 26 loci from 277 extended families (1484 persons). Using the Rocks Linux cluster with 22 compute-nodes, FBAT jobs performed about 14.4–15.9 times faster, while Unphased jobs performed 1.1–18.6 times faster compared to the accumulated computation duration. Conclusion Execution of exhaustive haplotype analysis using non-parallel software packages on a Linux-based system is an effective and efficient approach in terms of cost and performance. PMID:18541045

Capillary Pumped Heat Transfer (CHT) Experiment

NASA Technical Reports Server (NTRS)

Hallinan, Kevin P.; Allen, J. S.

1998-01-01

The operation of Capillary Pumped Loops (CPL's) in low gravity has generally been unable to match ground-based performance. The reason for this poorer performance has been elusive. In order to investigate the behavior of a CPL in low-gravity, an idealized, glass CPL experiment was constructed. This experiment, known as the Capillary-driven Heat Transfer (CHT) experiment, was flown on board the Space Shuttle Columbia in July 1997 during the Microgravity Science Laboratory mission. During the conduct of the CHT experiment an unexpected failure mode was observed. This failure mode was a result of liquid collecting and then eventually bridging the vapor return line. With the vapor return line blocked, the condensate was unable to return to the evaporator and dry-out subsequently followed. The mechanism for this collection and bridging has been associated with long wavelength instabilities of the liquid film forming in the vapor return line. Analysis has shown that vapor line blockage in present generation CPL devices is inevitable. Additionally, previous low-gravity CPL tests have reported the presence of relatively low frequency pressure oscillations during erratic system performance. Analysis reveals that these pressure oscillations are in part a result of long wavelength instabilities present in the evaporator pores, which likewise lead to liquid bridging and vapor entrapment in the porous media. Subsequent evaporation to the trapped vapor increases the vapor pressure. Eventually the vapor pressure causes ejection of the bridged liquid. Recoil stresses depress the meniscus, the vapor pressure rapidly increases, and the heated surface cools. The process then repeats with regularity.

Retrieval practice enhances the accessibility but not the quality of memory.

PubMed

Sutterer, David W; Awh, Edward

2016-06-01

Numerous studies have demonstrated that retrieval from long-term memory (LTM) can enhance subsequent memory performance, a phenomenon labeled the retrieval practice effect. However, the almost exclusive reliance on categorical stimuli in this literature leaves open a basic question about the nature of this improvement in memory performance. It has not yet been determined whether retrieval practice improves the probability of successful memory retrieval or the quality of the retrieved representation. To answer this question, we conducted three experiments using a mixture modeling approach (Zhang & Luck, 2008) that provides a measure of both the probability of recall and the quality of the recalled memories. Subjects attempted to memorize the color of 400 unique shapes. After every 10 images were presented, subjects either recalled the last 10 colors (the retrieval practice condition) by clicking on a color wheel with each shape as a retrieval cue or they participated in a control condition that involved no further presentations (Experiment 1) or restudy of the 10 shape/color associations (Experiments 2 and 3). Performance in a subsequent delayed recall test revealed a robust retrieval practice effect. Subjects recalled a significantly higher proportion of items that they had previously retrieved relative to items that were untested or that they had restudied. Interestingly, retrieval practice did not elicit any improvement in the precision of the retrieved memories. The same empirical pattern also was observed following delays of greater than 24 hours. Thus, retrieval practice increases the probability of successful memory retrieval but does not improve memory quality.

Performance enhancement of low-cost, high-accuracy, state estimation for vehicle collision prevention system using ANFIS

NASA Astrophysics Data System (ADS)

Saadeddin, Kamal; Abdel-Hafez, Mamoun F.; Jaradat, Mohammad A.; Jarrah, Mohammad Amin

2013-12-01

In this paper, a low-cost navigation system that fuses the measurements of the inertial navigation system (INS) and the global positioning system (GPS) receiver is developed. First, the system's dynamics are obtained based on a vehicle's kinematic model. Second, the INS and GPS measurements are fused using an extended Kalman filter (EKF) approach. Subsequently, an artificial intelligence based approach for the fusion of INS/GPS measurements is developed based on an Input-Delayed Adaptive Neuro-Fuzzy Inference System (IDANFIS). Experimental tests are conducted to demonstrate the performance of the two sensor fusion approaches. It is found that the use of the proposed IDANFIS approach achieves a reduction in the integration development time and an improvement in the estimation accuracy of the vehicle's position and velocity compared to the EKF based approach.

Improving Lunar Exploration with Robotic Follow-up

NASA Technical Reports Server (NTRS)

Fong, T.; Bualat, M.; Deans, M.; Heggy E.; Helper, M.; Hodges, K.; Lee, P.

2011-01-01

We are investigating how augmenting human field work with subsequent robot activity can improve lunar exploration. Robotic "follow-up" might involve: completing geology observations; making tedious or long-duration measurements of a target site or feature; curating samples in-situ; and performing unskilled, labor-intensive work. To study this technique, we have begun conducting a series of lunar analog field tests at Haughton Crater (Canada). Motivation: In most field geology studies on Earth, explorers often find themselves left with a set of observations they would have liked to make, or samples they would have liked to take, if only they had been able to stay longer in the field. For planetary field geology, we can imagine mobile robots - perhaps teleoperated vehicles previously used for manned exploration or dedicated planetary rovers - being deployed to perform such follow-up activities [1].

Microwave absorption performance of Ni(OH)2 decorating biomass carbon composites from Jackfruit peel

NASA Astrophysics Data System (ADS)

Guan, Hongtao; Wang, Huiya; Zhang, Yanlin; Dong, Chengjun; Chen, Gang; Wang, Yude; Xie, Jianbin

2018-07-01

The composite material of Ni(OH)2/biomass carbon have been prepared by a facile "carbonization-activation" procedure from Jackfruit peel and a subsequent water-bathing precipitation process. The biomass carbon material after activation (AC) is constituted of small particles and achieves a large specific surface area of 1602 m2/g. After decoration of Ni(OH)2 nanosheets, the Ni(OH)2/AC composites were investigated the microwave absorption performances in 2-18 GHz. The maximum reflection loss of the Ni(OH)2/AC composites reached -23.6 dB at 15.48 GHz with a thickness of 6 mm. Moreover, the fundamental mechanism based on conductivity, the polarization and defects is discussed. The present investigation offers a new possibility for the biomass based fabrication of potential microwave absorbing materials.

An interlaboratory comparison programme on radio frequency electromagnetic field measurements: the second round of the scheme.

PubMed

Nicolopoulou, E P; Ztoupis, I N; Karabetsos, E; Gonos, I F; Stathopulos, I A

2015-04-01

The second round of an interlaboratory comparison scheme on radio frequency electromagnetic field measurements has been conducted in order to evaluate the overall performance of laboratories that perform measurements in the vicinity of mobile phone base stations and broadcast antenna facilities. The participants recorded the electric field strength produced by two high frequency signal generators inside an anechoic chamber in three measurement scenarios with the antennas transmitting each time different signals at the FM, VHF, UHF and GSM frequency bands. In each measurement scenario, the participants also used their measurements in order to calculate the relative exposure ratios. The results were evaluated in each test level calculating performance statistics (z-scores and En numbers). Subsequently, possible sources of errors for each participating laboratory were discussed, and the overall evaluation of their performances was determined by using an aggregated performance statistic. A comparison between the two rounds proves the necessity of the scheme. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Gas Sensor Test Chip

NASA Technical Reports Server (NTRS)

Buehler, M.; Ryan, M.

1995-01-01

A new test chip is being developed to characterize conducting polymers used in gas sensors. The chip, a seven-layer cofired alumina substrate with gold electrodes, contains 11 comb and U- bend test structures. These structures are designed to measure the sheet resistance, conduction anisotropy, and peripheral conduction of spin-coated films that are not subsequently patterned.

Applicability of initial optimal maternal and fetal electrocardiogram combination vectors to subsequent recordings

NASA Astrophysics Data System (ADS)

Yan, Hua-Wen; Huang, Xiao-Lin; Zhao, Ying; Si, Jun-Feng; Liu, Tie-Bing; Liu, Hong-Xing

2014-11-01

A series of experiments are conducted to confirm whether the vectors calculated for an early section of a continuous non-invasive fetal electrocardiogram (fECG) recording can be directly applied to subsequent sections in order to reduce the computation required for real-time monitoring. Our results suggest that it is generally feasible to apply the initial optimal maternal and fetal ECG combination vectors to extract the fECG and maternal ECG in subsequent recorded sections.

Comparative study on the measurement of learning outcomes after powerpoint presentation and problem based learning with discussion in family medicine amongst fifth year medical students.

PubMed

Khobragade, Sujata; Abas, Adinegara Lutfi; Khobragade, Yadneshwar Sudam

2016-01-01

Learning outcomes after traditional teaching methods were compared with problem-based learning (PBL) among fifth year medical students. Six students participated each in traditional teaching and PBL methods, respectively. Traditional teaching method involved PowerPoint (PPT) presentation and PBL included study on case scenario and discussion. Both methods were effective in improving performance of students. Postteaching, we did not find significant differences in learning outcomes between these two teaching methods. (1) Study was conducted with an intention to find out which method of learning is more effective; traditional or PBL. (2) To assess the level of knowledge and understanding in anemia/zoonotic diseases as against diabetes/hypertension. All the students posted from February 3, 2014, to March 14, 2014, participated in this study. Six students were asked to prepare and present a lecture (PPT) and subsequent week other six students were asked to present PBL. Both groups presented different topics. Since it was a pre- and post-test, same students were taken as control. To maintain uniformity and to avoid bias due cultural diversity, language etc., same questions were administered. After taking verbal consent, all 34 students were given pretest on anemia and zoonotic diseases. Then lecture (PPT) by six students on the same topic was given it followed by posttest questionnaire. Subsequent week pretest was conducted on hypertension and diabetes. Then case scenario presentation and discussion (PBL) was done by different six students followed by posttest. Both the methods were compared. Analysis was done manually and standard error of means and students t -test was used to find out statistical significance. We found statistically significant improvement in performance of students after PPT presentation as well as PBL. Both methods are equally effective. However, Pretest results of students in anemia and zoonotic diseases (Group A) were poor compared to pretest results of students in hypertension and diabetes (Group B). The students who participated in presentation did not influence their performance as they were covering a small part of the topic and there were no differences in their marks compared to other students. We did not find significant differences in outcome after teaching between PBL and traditional methods. Performances of students were poor in anemia and zoonotic diseases which need remedial teaching. Assessment may influence retention ability and performance.

The dysfunctional consequences of a performance measurement system: the case of the Iranian national hospital grading programme.

PubMed

Aryankhesal, Aidin; Sheldon, Trevor A; Mannion, Russell; Mahdipour, Saeade

2015-07-01

Performance measurement systems are increasingly used to reward and improve provider performance. However, such initiatives may also inadvertently induce a range of unintended and dysfunctional side-effects. This study explores the unintended and adverse consequences induced by the Iranian national hospital grading programme, which incorporates financial incentives for meeting nationally defined standards. We interviewed key informants across four key groups with a legitimate interest in healthcare performance: four purposively selected hospitals; four health insurance organizations; the Iranian hospital accreditation body; and one grading agency. The transcribed interviews and field notes were analysed thematically, and subsequently, member checking was conducted. Seven dysfunctional consequences were identified: misrepresentation of data by hospitals; increased anxiety and stress among hospital employees; tunnel vision; financial pressures on poorly graded hospitals; incentives to purchase unnecessary equipment; erosion of public trust; and restricting access to hospital services by patients. These were caused by the way the grading system was implemented: poor standards of audit; the way in which the audit process was conducted; and the timing of audits. The pay for performance element of the grading system and the focus on structural aspects in the standards made improvement in grading particularly difficult for those hospitals that had been assessed as under-performing. Although the Iranian hospital grading system has resulted in a significant increase in the adoption of national standards, it has nevertheless induced a range of perverse outcomes. To mitigate these requires further refinement and recalibration of the system. © The Author(s) 2015.

Quantification of the Arrhythmogenic Effects of Spontaneous Atrial Extrasystole Using High-Resolution Epicardial Mapping.

PubMed

Teuwen, Christophe P; Kik, Charles; van der Does, Lisette J M E; Lanters, Eva A H; Knops, Paul; Mouws, Elisabeth M J P; Bogers, Ad J J C; de Groot, Natasja M S

2018-01-01

Atrial extrasystoles (AES) can initiate atrial fibrillation. However, the impact of spontaneous AES on intra-atrial conduction is unknown. The aims of this study were to examine conduction disorders provoked by AES and to correlate these conduction differences with patient characteristics, mapping locations, and type of AES. High-resolution epicardial mapping (electrodes N=128 or N=192; interelectrode distance, 2 mm) of the entire atrial surface was performed in patients (N=164; 69.5% male; age 67.2±10.5 years) undergoing open-chest cardiac surgery. AES were classified as premature, aberrant, or prematurely aberrant. Conduction delay and conduction block were quantified during sinus rhythm and AES and subsequently compared. Median incidence of conduction delay and conduction block during sinus rhythm was 1.2% (interquartile, 0%-2.3%) and 0.4% (interquartile, 0%-2.1%). In comparison, the median incidence of conduction delay and conduction block during 339 AES was respectively 2.8% (interquartile, 1.3%-4.6%) and 2.2% (interquartile, 0.3%-5.1%) and differed between the types of AES (prematurely aberrant>aberrant>premature). The degree of prematurity was not associated with a higher incidence of conduction disorders ( P >0.05). In contrast, a higher degree of aberrancy was associated with a higher incidence of conduction disorders; AES emerging as epicardial breakthrough provoked most conduction disorders ( P ≥0.002). AES caused most conduction disorders in patients with diabetes mellitus and left atrial dilatation ( P <0.05). Intraoperative high-resolution epicardial mapping showed that conduction disorders are mainly provoked by prematurely aberrant AES, particularly in patients with left atrial dilation and diabetes mellitus or emerging as epicardial breakthrough. © 2017 American Heart Association, Inc.

Egg Laying of Cabbage White Butterfly (Pieris brassicae) on Arabidopsis thaliana Affects Subsequent Performance of the Larvae

PubMed Central

Blenn, Beatrice; Drechsler, Navina; Gershenzon, Jonathan; Kunze, Reinhard; Hilker, Monika

2013-01-01

Plant resistance to the feeding by herbivorous insects has recently been found to be positively or negatively influenced by prior egg deposition. Here we show how crucial it is to conduct experiments on plant responses to herbivory under conditions that simulate natural insect behaviour. We used a well-studied plant – herbivore system, Arabidopsis thaliana and the cabbage white butterfly Pieris brassicae, testing the effects of naturally laid eggs (rather than egg extracts) and allowing larvae to feed gregariously as they do naturally (rather than placing single larvae on plants). Under natural conditions, newly hatched larvae start feeding on their egg shells before they consume leaf tissue, but access to egg shells had no effect on subsequent larval performance in our experiments. However, young larvae feeding gregariously on leaves previously laden with eggs caused less feeding damage, gained less weight during the first 2 days, and suffered twice as high a mortality until pupation compared to larvae feeding on plants that had never had eggs. The concentration of the major anti-herbivore defences of A. thaliana, the glucosinolates, was not significantly increased by oviposition, but the amount of the most abundant member of this class, 4-methylsulfinylbutyl glucosinolate was 1.8-fold lower in larval-damaged leaves with prior egg deposition compared to damaged leaves that had never had eggs. There were also few significant changes in the transcript levels of glucosinolate metabolic genes, except that egg deposition suppressed the feeding-induced up-regulation of FMOGS-OX2, a gene encoding a flavin monooxygenase involved in the last step of 4-methylsulfinylbutyl glucosinolate biosynthesis. Hence, our study demonstrates that oviposition does increase A. thaliana resistance to feeding by subsequently hatching larvae, but this cannot be attributed simply to changes in glucosinolate content. PMID:23527243

Small Launch Vehicle Concept Development for Affordable Multi-Stage Inline Configurations

NASA Technical Reports Server (NTRS)

Beers, Benjamin R.; Waters, Eric D.; Philips, Alan D.; Threet, Grady E., Jr.

2014-01-01

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center conducted a study of two configurations of a three stage, inline, liquid propellant small launch vehicle concept developed on the premise of maximizing affordability by targeting a specific payload capability range based on current industry demand. The initial configuration, NESC-1, employed liquid oxygen as the oxidizer and rocket propellant grade kerosene as the fuel in all three stages. The second and more heavily studied configuration, NESC-4, employed liquid oxygen and rocket propellant grade kerosene on the first and second stages and liquid oxygen and liquid methane fuel on the third stage. On both vehicles, sensitivity studies were first conducted on specific impulse and stage propellant mass fraction in order to baseline gear ratios and drive the focus of concept development. Subsequent sensitivity and trade studies on the NESC-4 configuration investigated potential impacts to affordability due to changes in gross liftoff weight and/or vehicle complexity. Results are discussed at a high level to understand the severity of certain sensitivities and how those trade studies conducted can either affect cost, performance or both.

Small Launch Vehicle Concept Development for Affordable Multi-Stage Inline Configurations

NASA Technical Reports Server (NTRS)

Beers, Benjamin R.; Waters, Eric D.; Philips, Alan D.; Threet, Grady E. Jr.

2013-01-01

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center conducted a study of two configurations of a three-stage, inline, liquid propellant small launch vehicle concept developed on the premise of maximizing affordability by targeting a specific payload capability range based on current industry demand. The initial configuration, NESC-1, employed liquid oxygen as the oxidizer and rocket propellant grade kerosene as the fuel in all three stages. The second and more heavily studied configuration, NESC-4, employed liquid oxygen and RP-1 on the first and second stages and liquid oxygen and liquid methane fuel on the third stage. On both vehicles, sensitivity studies were first conducted on specific impulse and stage propellant mass fraction in order to baseline gear ratios and drive the focus of concept development. Subsequent sensitivity and trade studies on the NESC-4 concept investigated potential impacts to affordability due to changes in gross liftoff weight and/or vehicle complexity. Results are discussed at a high level to understand the impact severity of certain sensitivities and how those trade studies conducted can either affect cost, performance, or both.

Stabilizing a graphene platform toward discrete components

NASA Astrophysics Data System (ADS)

Mzali, Sana; Montanaro, Alberto; Xavier, Stéphane; Servet, Bernard; Mazellier, Jean-Paul; Bezencenet, Odile; Legagneux, Pierre; Piquemal-Banci, Maëlis; Galceran, Regina; Dlubak, Bruno; Seneor, Pierre; Martin, Marie-Blandine; Hofmann, Stephan; Robertson, John; Cojocaru, Costel-Sorin; Centeno, Alba; Zurutuza, Amaia

2016-12-01

We report on statistical analysis and consistency of electrical performances of devices based on a large scale passivated graphene platform. More than 500 graphene field effect transistors (GFETs) based on graphene grown by chemical vapor deposition and transferred on 4 in. SiO2/Si substrates were fabricated and tested. We characterized the potential of a two-step encapsulation process including an Al2O3 protection layer to avoid graphene contamination during the lithographic process followed by a final Al2O3 passivation layer subsequent to the GFET fabrication. Devices were investigated for occurrence and reproducibility of conductance minimum related to the Dirac point. While no conductance minimum was observed in unpassivated devices, 75% of the passivated transistors exhibited a clear conductance minimum and low hysteresis. The maximum of the device number distribution corresponds to a residual doping below 5 × 1011 cm-2 (0.023 V/nm). This yield shows that GFETs integrating low-doped graphene and exhibiting small hysteresis in the transfer characteristics can be envisaged for discrete components, with even further potential for low power driven electronics.

Conductive aluminum line formation on aluminum nitride surface by infrared nanosecond laser

NASA Astrophysics Data System (ADS)

Kozioł, Paweł E.; Antończak, Arkadiusz J.; Szymczyk, Patrycja; Stępak, Bogusz; Abramski, Krzysztof M.

2013-12-01

In this paper the fabrication of conductive aluminum paths on AlN ceramic's surface due to the interaction of laser radiation Nd:YAG (1.064 μm) is presented. The metallization process produces an appropriate power value on the ceramics surface to ensure the correct temperature (2200 °C) for which aluminum and nitrogen bonds are broken. Studies have been undertaken on creating low-ohmic structures depending on the parameters such as radiation power, scanning speed, the coverage of subsequent pulses and the environmental impact of the process (air, nitrogen, argon). Furthermore, with regards to the application of this method, it was significant to determine the thickness of the functional layer. A structure of the resistivity of ρ = 0.64 × 10-6 Ω m and aluminum layer thickness of 10 μm was achieved for the process carried out on the inert gas, argon. In addition, a quantitative analysis of nitrogen and aluminum for laser-treated structures was conducted. The performed tests confirmed that the highest amount of aluminum was produced on the surface treated by laser radiation in the environment of the process gas, argon.

Si/Ti2O3/Reduced Graphene Oxide Nanocomposite Anodes for Lithium-Ion Batteries with Highly Enhanced Cyclic Stability.

PubMed

Park, A Reum; Son, Dae-Yong; Kim, Jung Sub; Lee, Jun Young; Park, Nam-Gyu; Park, Juhyun; Lee, Joong Kee; Yoo, Pil J

2015-08-26

Silicon (Si) has attracted tremendous attention as a high-capacity anode material for next generation Li-ion batteries (LIBs); unfortunately, it suffers from poor cyclic stability due to excessive volume expansion and reduced electrical conductivity after repeated cycles. To circumvent these issues, we propose that Si can be complexed with electrically conductive Ti2O3 to significantly enhance the reversible capacity and cyclic stability of Si-based anodes. We prepared a ternary nanocomposite of Si/Ti2O3/reduced graphene oxide (rGO) using mechanical blending and subsequent thermal reduction of the Si, TiO2 nanoparticles, and rGO nanosheets. As a result, the obtained ternary nanocomposite exhibited a specific capacity of 985 mAh/g and a Coulombic efficiency of 98.4% after 100 cycles at a current density of 100 mA/g. Furthermore, these ternary nanocomposite anodes exhibited outstanding rate capability characteristics, even with an increased current density of 10 A/g. This excellent electrochemical performance can be ascribed to the improved electron and ion transport provided by the Ti2O3 phase within the Si domains and the structurally reinforced conductive framework comprised of the rGO nanosheets. Therefore, it is expected that our approach can also be applied to other anode materials to enable large reversible capacity, excellent cyclic stability, and good rate capability for high-performance LIBs.

Assessment of the impact that the capsule fill tube has on implosions conducted with high density carbon ablators

NASA Astrophysics Data System (ADS)

Pak, Arthur; Benedetti, L. R.; Berzak Hopkins, L. F.; Clark, D.; Divol, L.; Dewald, E. L.; Fittinghoff, D.; Izumi, N.; Khan, S. F.; Landen, O.; Lepape, S.; Ma, T.; Marley, E.; Nagel, S.; Volegov, P.; Weber, C.; Bradley, D. K.; Callahan, D.; Grim, G.; Hurricane, O. A.; Patel, P.; Schneider, M. B.; Edwards, M. J.

2017-10-01

In recent inertial confinement implosion experiments conducted at the National Ignition Facility, bright and spatially localized x-ray emission within the hot spot at stagnation has been observed. This emission is associated with higher Z ablator material that is injected into the hot spot by the hydrodynamic perturbation induced by the 5-10 um diameter capsule fill tube. The reactivity of the DT fuel and subsequent yield of the implosion are strongly dependent on the density, temperature, and confinement time achieved throughout the stagnation of the implosion. Radiative losses from higher Z ablator material that mixes into the hot spot as well as non-uniformities in the compression and confinement induced by the fill tube perturbation can degrade the yield of the implosion. This work will examine the impact to conditions at stagnation that results from the fill tube perturbation. This assessment will be based from a pair of experiments conducted with a high density carbon ablator where the only deliberate change was reduction in fill tube diameter from 10 to 5 um. An estimate of the radiative losses and impact on performance from ablator mix injected into the hot spot by the fill tube perturbation will be presented. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Porous SnO2-CuO nanotubes for highly reversible lithium storage

NASA Astrophysics Data System (ADS)

Cheong, Jun Young; Kim, Chanhoon; Jung, Ji-Won; Yoon, Ki Ro; Kim, Il-Doo

2018-01-01

Facile synthesis of rationally designed structures is critical to realize a high performance electrode for lithium-ion batteries (LIBs). Among different candidates, tin(IV) oxide (SnO2) is one of the most actively researched electrode materials due to its high theoretical capacity (1493 mAh g-1), abundance, inexpensive costs, and environmental friendliness. However, severe capacity decay from the volume expansion and low conductivity of SnO2 have hampered its use as a feasible electrode for LIBs. Rationally designed SnO2-based nanostructures with conductive materials can be an ideal solution to resolve such limitations. In this work, we have successfully fabricated porous SnO2-CuO composite nanotubes (SnO2-CuO p-NTs) by electrospinning and subsequent calcination step. The porous nanotubular structure is expected to mitigate the volume expansion of SnO2, while the as-formed Cu from CuO upon lithiation allows faster electron transport by improving the low conductivity of SnO2. With a synergistic effect of both Sn and Cu-based oxides, SnO2-CuO p-NTs deliver stable cycling performance (91.3% of capacity retention, ∼538 mAh g-1) even after 350 cycles at a current density of 500 mA g-1, along with enhanced rate capabilities compared with SnO2.

AC electrical characterisation and insight to charge transfer mechanisms in DNA molecular wires through temperature and UV effects.

PubMed

Kassegne, Sam; Wibowo, Denni; Chi, James; Ramesh, Varsha; Narenji, Alaleh; Khosla, Ajit; Mokili, John

2015-06-01

In this study, AC characterisation of DNA molecular wires, effects of frequency, temperature and UV irradiation on their conductivity is presented. λ-DNA molecular wires suspended between high aspect-ratio electrodes exhibit highly frequency-dependent conductivity that approaches metal-like behaviour at high frequencies (∼MHz). Detailed temperature dependence experiments were performed that traced the impedance response of λ-DNA until its denaturation. UV irradiation experiments where conductivity was lost at higher and longer UV exposures helped to establish that it is indeed λ-DNA molecular wires that generate conductivity. The subsequent renaturation of λ-DNA resulted in the recovery of current conduction, providing yet another proof of the conducting DNA molecular wire bridge. The temperature results also revealed hysteretic and bi-modal impedance responses that could make DNA a candidate for nanoelectronics components like thermal transistors and switches. Further, these experiments shed light on the charge transfer mechanism in DNA. At higher temperatures, the expected increase in thermal-induced charge hopping may account for the decrease in impedance supporting the 'charge hopping mechanism' theory. UV light, on the other hand, causes damage to GC base-pairs and phosphate groups reducing the path available both for hopping and short-range tunneling mechanisms, and hence increasing impedance--this again supporting both the 'charge hopping' and 'tunneling' mechanism theories.

Efficient Reformulation of HOTFGM: Heat Conduction with Variable Thermal Conductivity

NASA Technical Reports Server (NTRS)

Zhong, Yi; Pindera, Marek-Jerzy; Arnold, Steven M. (Technical Monitor)

2002-01-01

Functionally graded materials (FGMs) have become one of the major research topics in the mechanics of materials community during the past fifteen years. FGMs are heterogeneous materials, characterized by spatially variable microstructure, and thus spatially variable macroscopic properties, introduced to enhance material or structural performance. The spatially variable material properties make FGMs challenging to analyze. The review of the various techniques employed to analyze the thermodynamical response of FGMs reveals two distinct and fundamentally different computational strategies, called uncoupled macromechanical and coupled micromechanical approaches by some investigators. The uncoupled macromechanical approaches ignore the effect of microstructural gradation by employing specific spatial variations of material properties, which are either assumed or obtained by local homogenization, thereby resulting in erroneous results under certain circumstances. In contrast, the coupled approaches explicitly account for the micro-macrostructural interaction, albeit at a significantly higher computational cost. The higher-order theory for functionally graded materials (HOTFGM) developed by Aboudi et al. is representative of the coupled approach. However, despite its demonstrated utility in applications where micro-macrostructural coupling effects are important, the theory's full potential is yet to be realized because the original formulation of HOTFGM is computationally intensive. This, in turn, limits the size of problems that can be solved due to the large number of equations required to mimic realistic material microstructures. Therefore, a basis for an efficient reformulation of HOTFGM, referred to as user-friendly formulation, is developed herein, and subsequently employed in the construction of the efficient reformulation using the local/global conductivity matrix approach. In order to extend HOTFGM's range of applicability, spatially variable thermal conductivity capability at the local level is incorporated into the efficient reformulation. Analytical solutions to validate both the user-friendly and efficient reformulations am also developed. Volume discretization sensitivity and validation studies, as well as a practical application of the developed efficient reformulation are subsequently carried out. The presented results illustrate the accuracy and implementability of both the user-friendly formulation and the efficient reformulation of HOTFGM.

Low thermal budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks. Potential for flexible printed electronics

DOE PAGES

Rager, Matthew S.; Aytug, Tolga; Veith, Gabriel M.; ...

2015-12-31

The developing field of printed electronics nanoparticle based inks such as CuO show great promise as a low-cost alternative to other metal-based counterparts (e.g., silver). In particular, CuO inks significantly eliminate the issue of particle oxidation, before and during the sintering process, that is prevalent in Cu-based formulations. We report here the scalable and low-thermal budget photonic fabrication of Cu interconnects employing a roll-to-roll compatible pulse-thermal-processing (PTP) technique that enables phase reduction and subsequent sintering of inkjet-printed CuO patterns onto flexible polymer templates. Detailed investigations of curing and sintering conditions were performed to understand the impact of PTP system conditionsmore » on the electrical performance of the Cu patterns. Specifically, the impact of energy and power of photonic pulses on print conductivity was systematically studied by varying the following key processing parameters: pulse intensity, duration and sequence. Through optimization of such parameters, highly conductive prints in < 1 s with resistivity values as low as 100 n m has been achieved. We also observed that the introduction of an initial ink-drying step in ambient atmosphere, after the printing and before sintering, leads to significant improvements in mechanical integrity and electrical performance of the printed Cu patterns. Moreover, the viability of CuO reactive inks, coupled with the PTP technology and pre ink-drying protocols, has also been demonstrated for the additive integration of a low-cost Cu temperature sensor onto a flexible polymer substrate.« less

Final Assessment of Manual Ultrasonic Examinations Applied to Detect Flaws in Primary System Dissimilar Metal Welds at North Anna Power Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Michael T.; Diaz, Aaron A.; Cinson, Anthony D.

2014-03-24

PNNL conducted a technical assessment of the NDE issues and protocols that led to missed detections of several axially oriented flaws in a steam generator primary inlet dissimilar metal weld at North Anna Power Station, Unit 1 (NAPS-1). This particular component design exhibits a significant outside-diameter (OD) taper that is not included as a blind performance demonstration mock-up within the industry’s Performance Demonstration Initiative, administered by EPRI. For this reason, the licensee engaged EPRI to assist in the development of a technical justification to support the basis for a site-specific qualification. The service-induced flaws at NAPS-1 were eventually detected asmore » a result of OD surface machining in preparation for a full structural weld overlay. The machining operation uncovered the existence of two through-wall flaws, based on the observance of primary water leaking from the dissimilar metal weld. A total of five axially oriented flaws were detected in varied locations around the weld circumference. The field volumetric examination that was conducted at NAPS-1 was a non-encoded, real-time manual ultrasonic examination. PNNL conducted both an initial assessment, and subsequently, a more rigorous technical evaluation (reported here), which has identified an array of NDE issues that may have led to the subject missed detections. These evaluations were performed through technical reviews and discussions with NRC staff, EPRI NDE Center personnel, industry and ISI vendor personnel, and ultrasonic transducer manufacturers, and laboratory tests, to better understand the underlying issues at North Anna.« less

Empirical research on Kano’s model and customer satisfaction

PubMed Central

Lin, Feng-Han; Tsai, Sang-Bing; Lee, Yu-Cheng; Hsiao, Cheng-Fu; Zhou, Jie; Wang, Jiangtao; Shang, Zhiwen

2017-01-01

Products are now developed based on what customers desire, and thus attractive quality creation has become crucial. In studies on customer satisfaction, methods for analyzing quality attributes and enhancing customer satisfaction have been proposed to facilitate product development. Although substantial studies have performed to assess the impact of the attributes on customer satisfaction, little research has been conducted that quantitatively calculate the odds of customer satisfaction for the Kano classification, fitting a nonlinear relationship between attribute-level performance and customer satisfaction. In the present study, the odds of customer satisfaction were determined to identify the classification of quality attributes, and took customer psychology into account to suggest how decision-makers should prioritize the allocation of resources. A novel method for quantitatively assessing quality attributes was proposed to determine classification criteria and fit the nonlinear relationship between quality attributes and customer satisfaction. Subsequently, a case study was conducted on bicycle user satisfaction to verify the novel method. The concept of customer satisfaction odds was integrated with the value function from prospect theory to understand quality attributes. The results of this study can serve as a reference for product designers to create attractive quality attributes in their products and thus enhance customer satisfaction. PMID:28873418

Empirical research on Kano's model and customer satisfaction.

PubMed

Lin, Feng-Han; Tsai, Sang-Bing; Lee, Yu-Cheng; Hsiao, Cheng-Fu; Zhou, Jie; Wang, Jiangtao; Shang, Zhiwen

2017-01-01

Products are now developed based on what customers desire, and thus attractive quality creation has become crucial. In studies on customer satisfaction, methods for analyzing quality attributes and enhancing customer satisfaction have been proposed to facilitate product development. Although substantial studies have performed to assess the impact of the attributes on customer satisfaction, little research has been conducted that quantitatively calculate the odds of customer satisfaction for the Kano classification, fitting a nonlinear relationship between attribute-level performance and customer satisfaction. In the present study, the odds of customer satisfaction were determined to identify the classification of quality attributes, and took customer psychology into account to suggest how decision-makers should prioritize the allocation of resources. A novel method for quantitatively assessing quality attributes was proposed to determine classification criteria and fit the nonlinear relationship between quality attributes and customer satisfaction. Subsequently, a case study was conducted on bicycle user satisfaction to verify the novel method. The concept of customer satisfaction odds was integrated with the value function from prospect theory to understand quality attributes. The results of this study can serve as a reference for product designers to create attractive quality attributes in their products and thus enhance customer satisfaction.

Pulsed-voltage atom probe tomography of low conductivity and insulator materials by application of ultrathin metallic coating on nanoscale specimen geometry.

PubMed

Adineh, Vahid R; Marceau, Ross K W; Chen, Yu; Si, Kae J; Velkov, Tony; Cheng, Wenlong; Li, Jian; Fu, Jing

2017-10-01

We present a novel approach for analysis of low-conductivity and insulating materials with conventional pulsed-voltage atom probe tomography (APT), by incorporating an ultrathin metallic coating on focused ion beam prepared needle-shaped specimens. Finite element electrostatic simulations of coated atom probe specimens were performed, which suggest remarkable improvement in uniform voltage distribution and subsequent field evaporation of the insulated samples with a metallic coating of approximately 10nm thickness. Using design of experiment technique, an experimental investigation was performed to study physical vapor deposition coating of needle specimens with end tip radii less than 100nm. The final geometries of the coated APT specimens were characterized with high-resolution scanning electron microscopy and transmission electron microscopy, and an empirical model was proposed to determine the optimal coating thickness for a given specimen size. The optimal coating strategy was applied to APT specimens of resin embedded Au nanospheres. Results demonstrate that the optimal coating strategy allows unique pulsed-voltage atom probe analysis and 3D imaging of biological and insulated samples. Copyright © 2017 Elsevier B.V. All rights reserved.

A Longitudinal Study of Childhood Obesity, Weight Status Change, and Subsequent Academic Performance in Taiwanese Children

ERIC Educational Resources Information Center

Chen, Li-Jung; Fox, Kenneth R.; Ku, Po-Wen; Wang, Ching-Hui

2012-01-01

Backround: This study examined the association among childhood obesity, weight status change, and subsequent academic performance at 6-year follow-up. Methods: First-grade students from one elementary school district in Taichung City, Taiwan were followed for 6 years (N = 409). Academic performance was extracted from the school records at the end…

Effects of insecticide treatments on subsequent defoliation by western spruce budworm in Oregon and Washington: 1982-92.

Treesearch

Katharine A. Sheehan

1996-01-01

Effects of insecticide treatments conducted in Oregon and Washington from 1982 through 1992 on subsequent defoliation by western spruce budworm (Choristoneura occidentalis Freeman) were evaluated by using aerial sketchmaps and a geographic information system. For each treatment, the extent and severity of defoliation was calculated for the treated...

The Effects of a School-Based Functional Analysis on Subsequent Classroom Behavior

ERIC Educational Resources Information Center

Davis, Tonya N.; Durand, Shannon; Fuentes, Lisa; Dacus, Sharon; Blenden, Kara

2014-01-01

In this study we analyzed the effects of conducting a school-based functional analysis on subsequent classroom behavior. Each participant was observed in the classroom during activities that were reported by teachers to result in high levels of challenging behavior. Participants were observed during (a) baseline, prior to the administration of a…

The Influence of International Service-Learning on Transcultural Self-Efficacy in Baccalaureate Nursing Graduates and Their Subsequent Practice

ERIC Educational Resources Information Center

Amerson, Roxanne

2012-01-01

The purpose of this study was to explain how participation in an international service-learning project during a community health course influenced transcultural self-efficacy of baccalaureate nursing graduates following graduation and their subsequent clinical practice. A qualitative, explanatory case study was used to conduct telephone…

20 CFR 404.2024 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2011 CFR

2011-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 404.2022(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

20 CFR 416.624 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2012 CFR

2012-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 416.622(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

20 CFR 416.624 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2013 CFR

2013-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 416.622(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

20 CFR 404.2024 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2013 CFR

2013-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 404.2022(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

20 CFR 404.2024 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2012 CFR

2012-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 404.2022(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

20 CFR 416.624 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2014 CFR

2014-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 416.622(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

20 CFR 404.2024 - How do we investigate a representative payee applicant?

Code of Federal Regulations, 2014 CFR

2014-04-01

..., we do the following: (1) Conduct a face-to-face interview with the payee applicant unless it is... the payee applicant is a creditor of the beneficiary (see § 404.2022(d)). (b) Subsequent face-to-face interviews. After holding a face-to-face interview with a payee applicant, subsequent face-to-face interviews...

Germanium microflower-on-nanostem as a high-performance lithium ion battery electrode

PubMed Central

Lee, Gwang-Hee; Kwon, S. Joon; Park, Kyung-Soo; Kang, Jin-Gu; Park, Jae-Gwan; Lee, Sungjun; Kim, Jae-Chan; Shim, Hyun-Woo; Kim, Dong-Wan

2014-01-01

We demonstrate a new design of Ge-based electrodes comprising three-dimensional (3-D) spherical microflowers containing crystalline nanorod networks on sturdy 1-D nanostems directly grown on a metallic current collector by facile thermal evaporation. The Ge nanorod networks were observed to self-replicate their tetrahedron structures and form a diamond cubic lattice-like inner network. After etching and subsequent carbon coating, the treated Ge nanostructures provide good electrical conductivity and are resistant to gradual deterioration, resulting in superior electrochemical performance as anode materials for LIBs, with a charge capacity retention of 96% after 100 cycles and a high specific capacity of 1360 mA h g−1 at 1 C and a high-rate capability with reversible capacities of 1080 and 850 mA h g−1 at the rates of 5 and 10 C, respectively. The improved electrochemical performance can be attributed to the fast electron transport and good strain accommodation of the carbon-filled Ge microflower-on-nanostem hybrid electrode. PMID:25363317

Nano-engineering of three-dimensional core/shell nanotube arrays for high performance supercapacitors

NASA Astrophysics Data System (ADS)

Grote, Fabian; Wen, Liaoyong; Lei, Yong

2014-06-01

Large-scale arrays of core/shell nanostructures are highly desirable to enhance the performance of supercapacitors. Here we demonstrate an innovative template-based fabrication technique with high structural controllability, which is capable of synthesizing well-ordered three-dimensional arrays of SnO2/MnO2 core/shell nanotubes for electrochemical energy storage in supercapacitor applications. The SnO2 core is fabricated by atomic layer deposition and provides a highly electrical conductive matrix. Subsequently a thin MnO2 shell is coated by electrochemical deposition onto the SnO2 core, which guarantees a short ion diffusion length within the shell. The core/shell structure shows an excellent electrochemical performance with a high specific capacitance of 910 F g-1 at 1 A g-1 and a good rate capability of remaining 217 F g-1 at 50 A g-1. These results shall pave the way to realize aqueous based asymmetric supercapacitors with high specific power and high specific energy.

Factors Influencing Clinical Performance of Baccalaureate Nursing Majors: A Retrospective Audit.

PubMed

Johnston, Sandra; Fox, Amanda; Coyer, Fiona Maree

2018-06-01

Transition of nursing student to new graduate depends on successful completion of clinical work placement during an undergraduate course. Supporting students during the clinical placement is imperative. This study examined associations between grade point average, domestic or international status, course entry qualification, and single or dual nursing degree to successful completion of clinical placement. A retrospective audit of 665 students in a baccalaureate nursing program was conducted to examine factors influencing clinical performance of baccalaureate nursing students. A significant association between entry qualification, lower grade point average, international status, and receipt of a constructive note was found: χ 2 = 8.678, df = 3, p = .034, t(3.862), df = 663, p ⩽ .001, and Fisher's exact test = 8.581, df = 1, p = .003, respectively. Understanding factors that affect clinical performance may help early identification of students at risk and allow for supportive intervention during placement and subsequent program completion. [J Nurs Educ. 2018;57(6):333-338.]. Copyright 2018, SLACK Incorporated.

Spacesuit glove manufacturing enhancements through the use of advanced technologies

NASA Astrophysics Data System (ADS)

Cadogan, David; Bradley, David; Kosmo, Joseph

The sucess of astronauts performing extravehicular activity (EVA) on orbit is highly dependent upon the performance of their spacesuit gloves.A study has recently been conducted to advance the development and manufacture of spacesuit gloves. The process replaces the manual techniques of spacesuit glove manufacture by utilizing emerging technologies such as laser scanning, Computer Aided Design (CAD), computer generated two-dimensional patterns from three-dimensionl surfaces, rapid prototyping technology, and laser cutting of materials, to manufacture the new gloves. Results of the program indicate that the baseline process will not increase the cost of the gloves as compared to the existing styles, and in production, may reduce the cost of the gloves. perhaps the most important outcome of the Laserscan process is that greater accuracy and design control can be realized. Greater accuracy was achieved in the baseline anthropometric measurement and CAD data measurement which subsequently improved the design feature. This effectively enhances glove performance through better fit and comfort.

Radiation damage in lithium-counterdoped n/p silicon solar cells

NASA Technical Reports Server (NTRS)

Hermann, A. M.; Swartz, C. K.; Brandhorst, H. W., Jr.; Weinberg, I.

1980-01-01

Lithium counterdoped n+/p silicon solar cells were irradiated with 1 MV electrons and their post irradiation performance and low temperature annealing properties were compared to that of the 0.35 ohm cm control cells. Cells fabricated from float zone and Czochralski grown silicon were investigated. It was found that the float zone cells exhibited superior radiation resistance compared to the control cells, while no improvement was noted for the Czochralski grown cells. Room temperature and 60 C annealing studies were conducted. The annealing was found to be a combination of first and second order kinetics for short times. It was suggested that the principal annealing mechanism was migration of lithium to a radiation induced defect with subsequent neutralization of the defect by combination with lithium. The effects of base lithium gradient were investigated. It was found that cells with negative base lithium gradients exhibited poor radiation resistance and performance compared to those with positive or no lithium gradients; the latter being preferred for overall performance and radiation resistance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galarraga, Haize; Warren, Robert J.; Lados, Diana A.

Electron beam melting (EBM) is a metal powder bed fusion additive manufacturing (AM) technology that is used to fabricate three-dimensional near-net-shaped parts directly from computer models. Ti-6Al-4V is the most widely used and studied alloy for this technology and is the focus of this work in its ELI (Extra Low Interstitial) variation. The mechanisms of microstructure formation, evolution, and its subsequent influence on mechanical properties of the alloy in as-fabricated condition have been documented by various researchers. In the present work, the thermal history resulting in the formation of the as-fabricated microstructure was analyzed and studied by a thermal simulation.more » Subsequently different heat treatments were performed based on three approaches in order to study the effects of heat treatments on the singular and exclusive microstructure formed during the EBM fabrication process. In the first approach, the effect of cooling rate after the solutionizing process was studied. In the second approach, the variation of α lath thickness during annealing treatment and correlation with mechanical properties was established. In the last approach, several solutionizing and aging experiments were conducted.« less

Reducing unplanned pregnancy and abortion in Zimbabwe through postabortion contraception.

PubMed

Johnson, Brooke R; Ndhlovu, Singatsho; Farr, Sherry L; Chipato, Tsungai

2002-06-01

In many countries, women treated for complications from spontaneous or unsafely induced abortion lack access to contraceptive services. As a result, many of them soon have a subsequent unplanned pregnancy or a repeat abortion, placing their health at increased risk. This report presents the results of a prospective intervention study on postabortion family planning conducted in the two largest public hospitals in Zimbabwe. Women at Harare Central Hospital, in the capital, received a postabortion family planning intervention, and Mpilo Central Hospital, in Bulawayo, served as the control site. The study cohort was 982 women, 527 of whom were followed for a 12-month period. During the follow-up period, significantly more women used highly effective methods of contraception, significantly fewer unplanned pregnancies occurred, and fewer repeat abortions were performed at the intervention site than at the control site. These results offer compelling evidence that ward-based contraceptive services provided to women treated for incomplete abortion can significantly reduce subsequent unplanned pregnancies. The results also suggest that postabortion family planning services can reduce the incidence of repeat abortion.

Dysplastic nevi with severe atypia: Long-term outcomes in patients with and without re-excision.

PubMed

Engeln, Kathleen; Peters, Kaitlin; Ho, Jonhan; Jedrych, Jaroslaw; Winger, Daniel; Ferris, Laura Korb; Patton, Timothy

2017-02-01

Dysplastic nevi with severe atypia (severely dysplastic nevi [SDN]) are frequently re-excised because of the concern that these lesions may in fact represent early melanoma. Data on long-term follow-up of these patients are limited. We sought to determine the rate of subsequent melanoma development in patients with SDN who underwent re-excision versus those who did not and to determine factors associated with decision to re-excise. A retrospective single institutional study was conducted with 451 adult patients (mean age 41.3 years) with SDN biopsied between November 1994 and November 2004, with clinical follow-up of at least 5 years. In 451 patients with SDN, re-excision was performed on 36.6%. Two melanomas were diagnosed in the re-excision specimens. Subsequent metastatic melanoma developed in 7 patients, all of whom had a history of melanoma. Margin comments influenced decision to re-excise. This was a retrospective study at a single institution. Re-excision of all SDN may not be necessary. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Distinguishing between taskwork and teamwork planning in teams: relations with coordination and interpersonal processes.

PubMed

Fisher, David M

2014-05-01

Planning in teams represents a critical process that lays the groundwork for effective team functioning. The current investigation examined whether emergent team planning can be meaningfully characterized in terms of a distinction between planning that focuses on taskwork and planning that focuses on teamwork. In Study 1, items written to reflect commonly identified indicators of team planning were subjected to an exploratory factor analysis. In Study 2, slightly modified items were provided to a separate sample, and a confirmatory factor analysis was conducted. In Study 3, the relationships between the different forms of planning and other team processes (i.e., coordination, interpersonal processes) were examined in order to determine whether there are unique relationships for task-focused and team-focused planning. Results from the first 2 studies provided support for a 2-factor structure of team planning, whereas Study 3 found independent relationships for taskwork and teamwork planning with subsequent team processes. Both forms of planning also exhibited indirect relationships with team performance via the mediating role of subsequent team processes. (c) 2014 APA, all rights reserved.

Effects of Mother-Infant Social Interactions on Infants' Subsequent Contingency Task Performance.

ERIC Educational Resources Information Center

Dunham, Philip; Dunham, Frances

1990-01-01

Infants participated in a nonsocial contingency task immediately after a social interaction with their mothers. The amount of time mothers and infants spent in a state of vocal turn-taking predicted individual differences in infants' subsequent performance on the contingency task. (PCB)

Benefits of music training in mandarin-speaking pediatric cochlear implant users.

PubMed

Fu, Qian-Jie; Galvin, John J; Wang, Xiaosong; Wu, Jiunn-Liang

2015-02-01

The aims of this study were to assess young (5- to 10-year-old) Mandarin-speaking cochlear implant (CI) users' musical pitch perception and to assess the benefits of computer-based home training on performance. Melodic contour identification (MCI) was used to assess musical pitch perception in 14 Mandarin-speaking pediatric CI users; the instrument timbre and the contour length were varied as experimental parameters. Six subjects received subsequent MCI training on their home computer in which auditory and visual feedback were provided. MCI performance was generally poor (grand mean=33.3% correct) and highly variable, with scores ranging from 9.3% to 98.1% correct; there was no significant effect of instrument timbre or contour length on performance (p>.05). After 4 weeks of training, performance sharply improved. Follow-up measures that were conducted 8 weeks after training was stopped showed no significant decline in MCI performance. For the 6 trained subjects, there was a significant effect of contour length for the training and follow-up measures. These preliminary data suggest that although baseline MCI performance initially may be poor, training may greatly improve Mandarin-speaking pediatric CI users' melodic pitch perception.

A 10-s sprint performed prior to moderate-intensity exercise prevents early post-exercise fall in glycaemia in individuals with type 1 diabetes.

PubMed

Bussau, V A; Ferreira, L D; Jones, T W; Fournier, P A

2007-09-01

We investigated whether a 10-s maximal sprint effort performed immediately prior to moderate-intensity exercise provides another means to counter the rapid fall in glycaemia associated with moderate-intensity exercise in individuals with type 1 diabetes. Seven complication-free type 1 diabetic males (21.6 +/- 3.6 years; mean+/-SD) with HbA(1c) levels of 7.4 +/- 0.7% injected their normal morning insulin dose and ate their usual breakfast. When post-meal glycaemia fell to approximately 11 mmol/l, participants were asked to perform a 10-s all-out sprint (sprint trial) or to rest (control trial) immediately before cycling at 40% of peak rate of oxygen consumption for 20 min, with both trials conducted in a random counterbalanced order. Sprinting did not affect the rapid fall in glycaemia during the subsequent bout of moderate-intensity exercise (2.9 +/- 0.4 mmol/l in 20 min; p = 0.00; mean+/-SE). However, during the following 45 min of recovery, glycaemia in the control trial decreased by 1.23 +/- 0.60 mmol/l (p = 0.04) while remaining stable in the sprint trial, subsequently decreasing in this latter trial at a rate similar to that in the control trial. The large increase in noradrenaline (norepinephrine) (p = 0.005) and lactate levels (p = 0.0005) may have contributed to the early post-exercise stabilisation of glycaemia in the sprint trial. During recovery, adrenaline (epinephrine) and NEFA levels increased marginally in the sprint trial, but other counter-regulatory hormones did not change significantly (p < 0.05). A 10-s sprint performed immediately prior to moderate-intensity exercise prevents glycaemia from falling during early recovery from moderate-intensity exercise in individuals with type 1 diabetes.

NiCo2S4 nanotube arrays grown on flexible nitrogen-doped carbon foams as three-dimensional binder-free integrated anodes for high-performance lithium-ion batteries.

PubMed

Wu, Xiaoyu; Li, Songmei; Wang, Bo; Liu, Jianhua; Yu, Mei

2016-02-14

Binary metal sulfides, especially NiCo2S4, hold great promise as anode materials for high-performance lithium-ion batteries because of their excellent electronic conductivity and high capacity compared to mono-metal sulfides and oxides. Here, NiCo2S4 nanotube arrays are successfully grown on flexible nitrogen-doped carbon foam (NDCF) substrates with robust adhesion via a facile surfactant-assisted hydrothermal route and the subsequent sulfurization treatment. The obtained NiCo2S4/NDCF composites show unique three-dimensional architectures, in which NiCo2S4 nanotubes of ∼5 μm in length and 100 nm in width are uniformly grown on the NDCF skeletons to form arrays. When used directly as integrated anodes for lithium-ion batteries without any conductive additives and binders, the NiCo2S4/NDCF composites exhibit a high reversible capacity of 1721 mA h g(-1) at a high current density of 500 mA g(-1), enhanced cycling performance with the capacity maintained at 1182 mA h g(-1) after 100 cycles, and a remarkable rate capability. The excellent lithium storage performances of the composites could be attributed to the unique material composition, a rationally designed hollow nanostructure and an integrated smart architecture, which offer fast electron transport and ion diffusion, enhanced material/-electrolyte contact area and facile accommodation of strains during the lithium insertion and extraction process.

Specifying and Pilot Testing Quality Measures for the American Society of Addiction Medicine's Standards of Care.

PubMed

Harris, Alex H S; Weisner, Constance M; Chalk, Mady; Capoccia, Victor; Chen, Cheng; Thomas, Cindy Parks

2016-01-01

In 2013, the American Society of Addiction Medicine (ASAM) approved its Standards of Care for the Addiction Specialist Physician. Subsequently, an ASAM Performance Measures Panel identified and prioritized the standards to be operationalized into performance measures. The goal of this study is to describe the process of operationalizing 3 of these standards into quality measures, and to present the initial measure specifications and results of pilot testing these measures in a large health care system. By presenting the process rather than just the end results, we hope to shed light on the measure development process to educate, and also to stimulate debate about the decisions that were made. Each measure was decomposed into major concepts. Then each concept was operationalized using commonly available administrative data sources. Alternative specifications examined and sensitivity analyses were conducted to inform decisions that balanced accuracy, clinical nuance, and simplicity. Using data from the US Veterans Health Administration (VHA), overall performance and variation in performance across 119 VHA facilities were calculated. Three measures were operationalized and pilot tested: pharmacotherapy for alcohol use disorder, pharmacotherapy for opioid use disorder, and timely follow-up after medically managed withdrawal (aka detoxification). Each measure was calculable with available data, and showed ample room for improvement (no ceiling effects) and wide facility-level variability. Next steps include conducting feasibility and pilot testing in other health care systems and other contexts such as standalone addiction treatment programs, and also to study the specification and predictive validity of these measures.

Body-Cooling Paradigm in Sport: Maximizing Safety and Performance During Competition.

PubMed

Adams, William M; Hosokawa, Yuri; Casa, Douglas J

2016-12-01

Although body cooling has both performance and safety benefits, knowledge on optimizing cooling during specific sport competition is limited. To identify when, during sport competition, it is optimal for body cooling and to identify optimal body-cooling modalities to enhance safety and maximize sport performance. A comprehensive literature search was conducted to identify articles with specific context regarding body cooling, sport performance, and cooling modalities used during sport competition. A search of scientific peer-reviewed literature examining the effects of body cooling on exercise performance was done to examine the influence of body cooling on exercise performance. Subsequently, a literature search was done to identify effective cooling modalities that have been shown to improve exercise performance. The cooling modalities that are most effective in cooling the body during sport competition depend on the sport, timing of cooling, and feasibility based on the constraints of the sports rules and regulations. Factoring in the length of breaks (halftime substitutions, etc), the equipment worn during competition, and the cooling modalities that offer the greatest potential to cool must be considered in each individual sport. Scientific evidence supports using body cooling as a method of improving performance during sport competition. Developing a strategy to use cooling modalities that are scientifically evidence-based to improve performance while maximizing athlete's safety warrants further investigation.

Adolescent mental health and subsequent parenting: a longitudinal birth cohort study

PubMed Central

Byford, M; Abbott, R A; Maughan, B; Richards, M; Kuh, D

2014-01-01

Background Adolescent mental health problems are associated with a range of adverse outcomes in adulthood but little is known about the effects on adult parenting practices. This study aimed to examine prospective associations between adolescent conduct and emotional problems and subsequent parenting behaviours in adulthood. Methods The study sample comprised 1110 members from the MRC National Survey of Health and Development. Prospective data were collected from teacher reports of conduct and emotional problems at age 13 and 15 years and adult outcome measures of parenting included intellectual environment, cognitive stimulation, coercive discipline, parental interest and parental aspiration. Results In regression models adjusted for the confounding effects of social background, cognition and education, adolescent conduct problems predicted coercive parenting behaviours in adulthood. The effects of adolescent emotional problems on the development of coercive discipline practices were explained by covariates. Likewise, the inability of parents who displayed conduct problems in adolescence to provide an intellectually stimulating home environment was fully explained by the adjustment for education. Conclusions Adolescents who exhibit conduct problems are more likely to develop coercive styles of parenting. PMID:24357583

Adolescent mental health and subsequent parenting: a longitudinal birth cohort study.

PubMed

Byford, M; Abbott, R A; Maughan, B; Kuh, D; Richards, M

2014-05-01

Adolescent mental health problems are associated with a range of adverse outcomes in adulthood but little is known about the effects on adult parenting practices. This study aimed to examine prospective associations between adolescent conduct and emotional problems and subsequent parenting behaviours in adulthood. The study sample comprised 1110 members from the MRC National Survey of Health and Development. Prospective data were collected from teacher reports of conduct and emotional problems at age 13 and 15 years and adult outcome measures of parenting included intellectual environment, cognitive stimulation, coercive discipline, parental interest and parental aspiration. In regression models adjusted for the confounding effects of social background, cognition and education, adolescent conduct problems predicted coercive parenting behaviours in adulthood. The effects of adolescent emotional problems on the development of coercive discipline practices were explained by covariates. Likewise, the inability of parents who displayed conduct problems in adolescence to provide an intellectually stimulating home environment was fully explained by the adjustment for education. Adolescents who exhibit conduct problems are more likely to develop coercive styles of parenting.

Factors Associated with International Graduate Students' Academic Performance: A Comparative Analysis between the First Semester and the Subsequent Semester in the U.S.

ERIC Educational Resources Information Center

Cavusoglu, Muhittin; White, Williemae; James, Waynne B.; Cobanoglu, Cihan

2016-01-01

The purpose of this study was to identify differences that impact international graduate student performance in the first semester compared to the subsequent semesters. This study was a qualitative study focused on the factors associated with international graduate student academic performance between the first semester and their subsequent…

Post-Flight Assessment of Low Density Supersonic Decelerator Flight Dynamics Test 2 Simulation

NASA Technical Reports Server (NTRS)

Dutta, Soumyo; Bowes, Angela L.; White, Joseph P.; Striepe, Scott A.; Queen, Eric M.; O'Farrel, Clara; Ivanov, Mark C.

2016-01-01

NASA's Low Density Supersonic Decelerator (LDSD) project conducted its second Supersonic Flight Dynamics Test (SFDT-2) on June 8, 2015. The Program to Optimize Simulated Trajectories II (POST2) was one of the flight dynamics tools used to simulate and predict the flight performance and was a major tool used in the post-flight assessment of the flight trajectory. This paper compares the simulation predictions with the reconstructed trajectory. Additionally, off-nominal conditions seen during flight are modeled in the simulation to reconcile the predictions with flight data. These analyses are beneficial to characterize the results of the flight test and to improve the simulation and targeting of the subsequent LDSD flights.

A Modified Isotropic-Kinematic Hardening Model to Predict the Defects in Tube Hydroforming Process

NASA Astrophysics Data System (ADS)

Jin, Kai; Guo, Qun; Tao, Jie; Guo, Xun-zhong

2017-11-01

Numerical simulations of tube hydroforming process of hollow crankshafts were conducted by using finite element analysis method. Moreover, the modified model involving the integration of isotropic-kinematic hardening model with ductile criteria model was used to more accurately optimize the process parameters such as internal pressure, feed distance and friction coefficient. Subsequently, hydroforming experiments were performed based on the simulation results. The comparison between experimental and simulation results indicated that the prediction of tube deformation, crack and wrinkle was quite accurate for the tube hydroforming process. Finally, hollow crankshafts with high thickness uniformity were obtained and the thickness distribution between numerical and experimental results was well consistent.

Very Low Thrust Gaseous Oxygen-hydrogen Rocket Engine Ignition Technology

NASA Technical Reports Server (NTRS)

Bjorklund, Roy A.

1983-01-01

An experimental program was performed to determine the minimum energy per spark for reliable and repeatable ignition of gaseous oxygen (GO2) and gaseous hydrogen (GH2) in very low thrust 0.44 to 2.22-N (0.10 to 0.50-lb sub f) rocket engines or spacecraft and satellite attitude control systems (ACS) application. Initially, the testing was conducted at ambient conditions, with the results subsequently verified under vacuum conditions. An experimental breadboard electrical exciter that delivered 0.2 to 0.3 mj per spark was developed and demonstrated by repeated ignitions of a 2.22-N (0.50-lb sub f) thruster in a vacuum chamber with test durations up to 30 min.

Preparation and electrochemical properties of core-shell carbon coated Mn-Sn complex metal oxide as anode materials for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Zhang, Ruixue; Fang, Guoqing; Liu, Weiwei; Xia, Bingbo; Sun, Hongdan; Zheng, Junwei; Li, Decheng

2014-02-01

In this study, we synthesized a carbon coated Mn-Sn metal oxide composite with core-shell structure (MTO@C) via a simple glucose hydrothermal reaction and subsequent carbonization approach. When the MTO@C composite was applied as an anode material for lithium-ion batteries, it maintained a reversible capacity of 409 mA h g-1 after 200 cycles at a current density of 100 mA g-1. The uniformed and continuous carbon layer formed on the MTO nanoparticles, effectively buffered the volumetric change of the active material and increased electronic conductivity, which thus prolonged the cycling performance of the MTO@C electrode.

Configuration development study of the X-24C hypersonic research airplane, phase 2

NASA Technical Reports Server (NTRS)

Combs, H. G.

1977-01-01

The X-24C Hypersonic Research Vehicle, configured with a heat-sink structure, a launch mass limit of 31.75 Mg and powered by an LR-105 Rocket Engine plus 12 LR-101 Sustainer Engines, was found to be the more cost effective of the candidate configurations. In addition, the configuration provides the maximum off design growth potential capability and subsequently, was selected as the candidate configuration to be subjected to the design refinement study in the remaining segment of the study. Selection of this configuration was based on the analytical study conducted on the performance growth capabilities of the candidate configurations selected from the Phase 1 Study.

Splice-site mutations identified in PDE6A responsible for retinitis pigmentosa in consanguineous Pakistani families

PubMed Central

Khan, Shahid Y.; Ali, Shahbaz; Naeem, Muhammad Asif; Khan, Shaheen N.; Husnain, Tayyab; Butt, Nadeem H.; Qazi, Zaheeruddin A.; Akram, Javed; Riazuddin, Sheikh; Ayyagari, Radha; Hejtmancik, J. Fielding

2015-01-01

Purpose This study was conducted to localize and identify causal mutations associated with autosomal recessive retinitis pigmentosa (RP) in consanguineous familial cases of Pakistani origin. Methods Ophthalmic examinations that included funduscopy and electroretinography (ERG) were performed to confirm the affectation status. Blood samples were collected from all participating individuals, and genomic DNA was extracted. A genome-wide scan was performed, and two-point logarithm of odds (LOD) scores were calculated. Sanger sequencing was performed to identify the causative variants. Subsequently, we performed whole exome sequencing to rule out the possibility of a second causal variant within the linkage interval. Sequence conservation was performed with alignment analyses of PDE6A orthologs, and in silico splicing analysis was completed with Human Splicing Finder version 2.4.1. Results A large multigenerational consanguineous family diagnosed with early-onset RP was ascertained. An ophthalmic clinical examination consisting of fundus photography and electroretinography confirmed the diagnosis of RP. A genome-wide scan was performed, and suggestive two-point LOD scores were observed with markers on chromosome 5q. Haplotype analyses identified the region; however, the region did not segregate with the disease phenotype in the family. Subsequently, we performed a second genome-wide scan that excluded the entire genome except the chromosome 5q region harboring PDE6A. Next-generation whole exome sequencing identified a splice acceptor site mutation in intron 16: c.2028–1G>A, which was completely conserved in PDE6A orthologs and was absent in ethnically matched 350 control chromosomes, the 1000 Genomes database, and the NHLBI Exome Sequencing Project. Subsequently, we investigated our entire cohort of RP familial cases and identified a second family who harbored a splice acceptor site mutation in intron 10: c.1408–2A>G. In silico analysis suggested that these mutations will result in the elimination of wild-type splice acceptor sites that would result in either skipping of the respective exon or the creation of a new cryptic splice acceptor site; both possibilities would result in retinal photoreceptor cells that lack PDE6A wild-type protein. Conclusions we report two splice acceptor site variations in PDE6A in consanguineous Pakistani families who manifested cardinal symptoms of RP. Taken together with our previously published work, our data suggest that mutations in PDE6A account for about 2% of the total genetic load of RP in our cohort and possibly in the Pakistani population as well. PMID:26321862

Pressure control of a proton beam-irradiated water target through an internal flow channel-induced thermosyphon.

PubMed

Hong, Bong Hwan; Jung, In Su

2017-07-01

A water target was designed to enhance cooling efficiency using a thermosyphon, which is a system that uses natural convection to induce heat exchange. Two water targets were fabricated: a square target without any flow channel and a target with a flow channel design to induce a thermosyphon mechanism. These two targets had the same internal volume of 8 ml. First, visualization experiments were performed to observe the internal flow by natural convection. Subsequently, an experiment was conducted to compare the cooling performance of both water targets by measuring the temperature and pressure. A 30-MeV proton beam with a beam current of 20 μA was used to irradiate both targets. Consequently, the target with an internal flow channel had a lower mean temperature and a 50% pressure drop compared to the target without a flow channel during proton beam irradiation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Aerobic Exercise During Encoding Impairs Hippocampus-Dependent Memory.

PubMed

Soga, Keishi; Kamijo, Keita; Masaki, Hiroaki

2017-08-01

We investigated how aerobic exercise during encoding affects hippocampus-dependent memory through a source memory task that assessed hippocampus-independent familiarity and hippocampus-dependent recollection processes. Using a within-participants design, young adult participants performed a memory-encoding task while performing a cycling exercise or being seated. The subsequent retrieval phase was conducted while sitting on a chair. We assessed behavioral and event-related brain potential measures of familiarity and recollection processes during the retrieval phase. Results indicated that source accuracy was lower for encoding with exercise than for encoding in the resting condition. Event-related brain potential measures indicated that the parietal old/new effect, which has been linked to recollection processing, was observed in the exercise condition, whereas it was absent in the rest condition, which is indicative of exercise-induced hippocampal activation. These findings suggest that aerobic exercise during encoding impairs hippocampus-dependent memory, which may be attributed to inefficient source encoding during aerobic exercise.

Efficient Light Extraction of Organic Light-Emitting Diodes on a Fully Solution-Processed Flexible Substrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tong, Kwing; Liu, Xiaofeng; Zhao, Fangchao

A flexible, nanocomposite substrate for maximizing light outcoupling efficiencies of organic light-emitting diodes (OLEDs) is introduced. In depth investigation is performed on designing the integrated strategy based on considerations of surface conductivity, microcavity tuning, and internal light scattering. The resulting nanocomposite substrate consists of silver nanowires as the electrode and a high-index polymer layer and a light-scattering layer for light extraction. It is able to outcouple both the waveguide and the substrate modes, two modes accounting for significant losses in OLED device efficiency. With enhanced light outcoupling, white OLEDs subsequently fabricated on the nanocomposite substrates demonstrate performance metrics of 107more » lm W -1 power efficiency and 49% external quantum efficiency at 1000 cd m -2. Thus, the nanocomposite substrate is fabricated by solution processes at low temperatures for potentially low manufacturing cost.« less

Autoregressive statistical pattern recognition algorithms for damage detection in civil structures

NASA Astrophysics Data System (ADS)

Yao, Ruigen; Pakzad, Shamim N.

2012-08-01

Statistical pattern recognition has recently emerged as a promising set of complementary methods to system identification for automatic structural damage assessment. Its essence is to use well-known concepts in statistics for boundary definition of different pattern classes, such as those for damaged and undamaged structures. In this paper, several statistical pattern recognition algorithms using autoregressive models, including statistical control charts and hypothesis testing, are reviewed as potentially competitive damage detection techniques. To enhance the performance of statistical methods, new feature extraction techniques using model spectra and residual autocorrelation, together with resampling-based threshold construction methods, are proposed. Subsequently, simulated acceleration data from a multi degree-of-freedom system is generated to test and compare the efficiency of the existing and proposed algorithms. Data from laboratory experiments conducted on a truss and a large-scale bridge slab model are then used to further validate the damage detection methods and demonstrate the superior performance of proposed algorithms.

A structural regression model for relationship between indoor air quality with dissatisfaction of occupants in education environment

NASA Astrophysics Data System (ADS)

Hosseini, Hamid Reza; Yunos, Mohd Yazid Mohd; Ismail, Sumarni; Yaman, Maheran

2017-12-01

This paper analysis the effects of indoor air elements on the dissatisfaction of occupants in education of environments. Tries to find the equation model for increasing the comprehension about these affects and optimizes satisfaction of occupants about indoor environment. Subsequently, increase performance of students, lecturers and staffs. As the method, a satisfaction questionnaire (SQ) and measuring environment elements (MEE) was conducted, 143 respondents at five classrooms, four staff rooms and five lectures rooms were considered. Temperature, air velocity and humidity (TVH) were used as independent variables and dissatisfaction as dependent variable. The hypothesis was tested for significant relationship between variables, and analysis was applied. Results found that indoor air quality presents direct effects on dissatisfaction of occupants and indirect effects on performance and the highest effects fallowed by temperature. These results may help to optimize the quality of efficiency and effectiveness in education environments.

Aligned hierarchical Ag/ZnO nano-heterostructure arrays via electrohydrodynamic nanowire template for enhanced gas-sensing properties.

PubMed

Yin, Zhouping; Wang, Xiaomei; Sun, Fazhe; Tong, Xiaohu; Zhu, Chen; Lv, Qiying; Ye, Dong; Wang, Shuai; Luo, Wei; Huang, YongAn

2017-09-22

Gas sensing performance can be improved significantly by the increase in both the effective gas exposure area and the surface reactivitiy of ZnO nanorods. Here, we propose aligned hierarchical Ag/ZnO nano-heterostructure arrays (h-Ag/ZnO-NAs) via electrohydrodynamic nanowire template, together with a subsequent hydrothermal synthesis and photoreduction reaction. The h-Ag/ZnO-NAs scatter at top for higher specific surface areas with the air, simultaneously contact at root for the electrical conduction. Besides, the ZnO nanorods are uniformly coated with dispersed Ag nanoparticles, resulting in a tremendous enhancement of the surface reactivity. Compared with pure ZnO, such h-Ag/ZnO-NAs exhibit lower electrical resistance and faster responses. Moreover, they demonstrate enhanced NO 2 gas sensing properties. Self-assembly via electrohydrodynamic nanowire template paves a new way for the preparation of high performance gas sensors.

Failure life determination of oilfield elastomer seals in sour gas/dimethyl disulfide environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennelley, K.J.; Abrams, P.I.; Vicic, J.C.

1989-01-01

Previous screening tests of various oilfield elastomers in sour gas/dimethyl disulfide environments indicated that hydrogenated nitrile (HNBR), tetrafluoroethylene-propylene (TFE/P), ethylene-propylene-diene (EPDM), and perfluorinated rubber (FFKM) elastomers may perform satisfactorily in these environments. This paper describes subsequent failure life tests conducted with the subject elastomers in the sour gas/dimethyl disulfide test environment at several elevated temperatures (> 135{degrees}C). The materials were tested in the form of O-rings (size 214), which were used to seal an autoclave containing the test environment at 14 MPa gas pressure. The results were used to extrapolate time to failure at a common reference temperature of 135{degrees}C.more » The performance of EPDM and HNBR in the sour gas/dimethyl disulfide mixture substantially exceeded a projected 20-year service life at 135{degrees}C, while FFKM and TFE/P did not.« less

Efficient Light Extraction of Organic Light-Emitting Diodes on a Fully Solution-Processed Flexible Substrate

DOE PAGES

Tong, Kwing; Liu, Xiaofeng; Zhao, Fangchao; ...

2017-07-18

A flexible, nanocomposite substrate for maximizing light outcoupling efficiencies of organic light-emitting diodes (OLEDs) is introduced. In depth investigation is performed on designing the integrated strategy based on considerations of surface conductivity, microcavity tuning, and internal light scattering. The resulting nanocomposite substrate consists of silver nanowires as the electrode and a high-index polymer layer and a light-scattering layer for light extraction. It is able to outcouple both the waveguide and the substrate modes, two modes accounting for significant losses in OLED device efficiency. With enhanced light outcoupling, white OLEDs subsequently fabricated on the nanocomposite substrates demonstrate performance metrics of 107more » lm W -1 power efficiency and 49% external quantum efficiency at 1000 cd m -2. Thus, the nanocomposite substrate is fabricated by solution processes at low temperatures for potentially low manufacturing cost.« less

Mental health system governance in Nigeria: challenges, opportunities and strategies for improvement.

PubMed

Abdulmalik, J; Kola, L; Gureje, O

2016-01-01

A health systems approach to understanding efforts for improving health care services is gaining traction globally. A component of this approach focuses on health system governance (HSG), which can make or mar the successful implementation of health care interventions. Very few studies have explored HSG in low- and middle-income countries, including Nigeria. Studies focusing on mental health system governance, are even more of a rarity. This study evaluates the mental HSG of Nigeria with a view to understanding the challenges, opportunities and strategies for strengthening it. This study was conducted as part of the project, Emerging Mental Health Systems in Low and Middle Income Countries (Emerald). A multi-method study design was utilized to evaluate the mental HSG status of Nigeria. A situational analysis of the health policy and legal environment in the country was performed. Subsequently, 30 key informant interviews were conducted at national, state and district levels to explore the country's mental HSG. The existing policy, legislative and institutional framework for HSG in Nigeria reveals a complete exclusion of mental health in key health sector documents. The revised mental health policy is however promising. Using the Siddiqi framework categories, we identified pragmatic strategies for mental health system strengthening that include a consideration of existing challenges and opportunities within the system. The identified strategies provide a template for the subsequent activities of the Emerald Programme (and other interventions), towards strengthening the mental health system of Nigeria.

Time series geophysical monitoring of permanganate injections and in situ chemical oxidation of PCE, OU1 area, Savage Superfund Site, Milford, NH, USA

NASA Astrophysics Data System (ADS)

Harte, Philip T.; Smith, Thor E.; Williams, John H.; Degnan, James R.

2012-05-01

In situ chemical oxidation (ISCO) treatment with sodium permanganate, an electrically conductive oxidant, provides a strong electrical signal for tracking of injectate transport using time series geophysical surveys including direct current (DC) resistivity and electromagnetic (EM) methods. Effective remediation is dependent upon placing the oxidant in close contact with the contaminated aquifer. Therefore, monitoring tools that provide enhanced tracking capability of the injectate offer considerable benefit to guide subsequent ISCO injections. Time-series geophysical surveys were performed at a superfund site in New Hampshire, USA over a one-year period to identify temporal changes in the bulk electrical conductivity of a tetrachloroethylene (PCE; also called tetrachloroethene) contaminated, glacially deposited aquifer due to the injection of sodium permanganate. The ISCO treatment involved a series of pulse injections of sodium permanganate from multiple injection wells within a contained area of the aquifer. After the initial injection, the permanganate was allowed to disperse under ambient groundwater velocities. Time series geophysical surveys identified the downward sinking and pooling of the sodium permanganate atop of the underlying till or bedrock surface caused by density-driven flow, and the limited horizontal spread of the sodium permanganate in the shallow parts of the aquifer during this injection period. When coupled with conventional monitoring, the surveys allowed for an assessment of ISCO treatment effectiveness in targeting the PCE plume and helped target areas for subsequent treatment.

Time series geophysical monitoring of permanganate injections and in situ chemical oxidation of PCE, OU1 area, Savage Superfund Site, Milford, NH, USA

USGS Publications Warehouse

Harte, Philip T.; Smith, Thor E.; Williams, John H.; Degnan, James R.

2012-01-01

In situ chemical oxidation (ISCO) treatment with sodium permanganate, an electrically conductive oxidant, provides a strong electrical signal for tracking of injectate transport using time series geophysical surveys including direct current (DC) resistivity and electromagnetic (EM) methods. Effective remediation is dependent upon placing the oxidant in close contact with the contaminated aquifer. Therefore, monitoring tools that provide enhanced tracking capability of the injectate offer considerable benefit to guide subsequent ISCO injections. Time-series geophysical surveys were performed at a superfund site in New Hampshire, USA over a one-year period to identify temporal changes in the bulk electrical conductivity of a tetrachloroethylene (PCE; also called tetrachloroethene) contaminated, glacially deposited aquifer due to the injection of sodium permanganate. The ISCO treatment involved a series of pulse injections of sodium permanganate from multiple injection wells within a contained area of the aquifer. After the initial injection, the permanganate was allowed to disperse under ambient groundwater velocities. Time series geophysical surveys identified the downward sinking and pooling of the sodium permanganate atop of the underlying till or bedrock surface caused by density-driven flow, and the limited horizontal spread of the sodium permanganate in the shallow parts of the aquifer during this injection period. When coupled with conventional monitoring, the surveys allowed for an assessment of ISCO treatment effectiveness in targeting the PCE plume and helped target areas for subsequent treatment.

Time series geophysical monitoring of permanganate injections and in situ chemical oxidation of PCE, OU1 area, Savage Superfund Site, Milford, NH, USA.

PubMed

Harte, Philip T; Smith, Thor E; Williams, John H; Degnan, James R

2012-05-01

In situ chemical oxidation (ISCO) treatment with sodium permanganate, an electrically conductive oxidant, provides a strong electrical signal for tracking of injectate transport using time series geophysical surveys including direct current (DC) resistivity and electromagnetic (EM) methods. Effective remediation is dependent upon placing the oxidant in close contact with the contaminated aquifer. Therefore, monitoring tools that provide enhanced tracking capability of the injectate offer considerable benefit to guide subsequent ISCO injections. Time-series geophysical surveys were performed at a superfund site in New Hampshire, USA over a one-year period to identify temporal changes in the bulk electrical conductivity of a tetrachloroethylene (PCE; also called tetrachloroethene) contaminated, glacially deposited aquifer due to the injection of sodium permanganate. The ISCO treatment involved a series of pulse injections of sodium permanganate from multiple injection wells within a contained area of the aquifer. After the initial injection, the permanganate was allowed to disperse under ambient groundwater velocities. Time series geophysical surveys identified the downward sinking and pooling of the sodium permanganate atop of the underlying till or bedrock surface caused by density-driven flow, and the limited horizontal spread of the sodium permanganate in the shallow parts of the aquifer during this injection period. When coupled with conventional monitoring, the surveys allowed for an assessment of ISCO treatment effectiveness in targeting the PCE plume and helped target areas for subsequent treatment. Published by Elsevier B.V.

High-Stakes Accountability: Student Anxiety and Large-Scale Testing

ERIC Educational Resources Information Center

von der Embse, Nathaniel P.; Witmer, Sara E.

2014-01-01

This study examined the relationship between student anxiety about high-stakes testing and their subsequent test performance. The FRIEDBEN Test Anxiety Scale was administered to 1,134 11th-grade students, and data were subsequently collected on their statewide assessment performance. Test anxiety was a significant predictor of test performance…

Effect of Videotape Playback and Teacher Comment on Anxiety During Subsequent Task Performance.

ERIC Educational Resources Information Center

Breen, Myles P.; Diehl, Roderick

Feedback by teacher comment, by television playback, and by self-analysis, singly, or together, reduced anxiety in subsequent performance as measured by nonfluencies in speech. Nonfluencies were counted in eight categories: the sounds, "ah,""um," or "uh;" correction; sentence incompletion; repetition; stutter; intruding incoherent sound; tongue…

Improved Li storage performance in SnO 2 nanocrystals by a synergetic doping

DOE PAGES

Wan, Ning; Lu, Xia; Wang, Yuesheng; ...

2016-01-06

Tin dioxide (SnO 2) is a widely investigated lithium (Li) storage material because of its easy preparation, two-step storage mechanism and high specific capacity for lithium-ion batteries (LIBs). In this contribution, a phase-pure cobalt-doped SnO 2 (Co/SnO 2) and a cobalt and nitrogen co-doped SnO 2 (Co-N/SnO 2) nanocrystals are prepared to explore their Li storage behaviors. It is found that the morphology, specific surface area, and electrochemical properties could be largely modulated in the doped and co-doped SnO 2 nanocrystals. Gavalnostatic cycling results indicate that the Co-N/SnO 2 electrode delivers a specific capacity as high as 716 mAh gmore » –1 after 50 cycles, and the same outstanding rate performance can be observed in subsequent cycles due to the ionic/electronic conductivity enhancement by co-doping effect. Further, microstructure observation indicates the existence of intermediate phase of Li 3N with high ionic conductivity upon cycling, which probably accounts for the improvements of Co-N/SnO 2 electrodes. Furthermore, we find that the method of synergetic doping into SnO 2 with Co and N, with which the electrochemical performances is enhanced remarkably, undoubtedly, will have an important influence on the material itself and community of LIBs as well.« less

Changes to Hearing Levels Over the First Year After Stapes Surgery: An Analysis of 139 Patients.

PubMed

Nash, Robert; Patel, Bhavesh; Lavy, Jeremy

2018-06-15

Stapes surgery is performed for hearing restoration in patients with otosclerosis. Results from stapes surgery are good, although a small proportion will have a persistent conductive hearing loss and will consider revision surgery. The timing of such surgery depends on expected changes to hearing thresholds during the postoperative period. We performed a retrospective case series analysis of a database of outcomes from stapes surgery performed between July 26, 2013 and March 11, 2016 at one center. Hearing outcomes over the year subsequent to surgery were recorded. There was a significant improvement in hearing outcomes between the postoperative visit at 6 weeks (mean air-bone gap 6.0 dB) and the hearing outcome at 6 months (mean air-bone gap 3.3 dB) (p < 0.01). This improvement was maintained at 12 months (mean air-bone gap 3.1 dB), although there were individual patients whose hearing outcome improved or deteriorated during this period. Improvements in air conduction thresholds mirrored improvements in air-bone gap measurements. Patients with an initial suboptimal or poor result after stapes surgery may observed improvement in their hearing thresholds in the year after surgery. These patients may have large preoperative air-bone gaps, and have a trend to have obliterated footplates. Revision surgery should not be considered until at least 6 months after primary surgery.

40 CFR 35.6570 - Use of the same engineer during subsequent phases of response.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Use of the same engineer during... Agreement § 35.6570 Use of the same engineer during subsequent phases of response. (a) If the public notice... CERCLA remedial response Cooperative Agreement may use the engineer procured to conduct any or all of the...

40 CFR 35.6570 - Use of the same engineer during subsequent phases of response.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Use of the same engineer during... Agreement § 35.6570 Use of the same engineer during subsequent phases of response. (a) If the public notice... CERCLA remedial response Cooperative Agreement may use the engineer procured to conduct any or all of the...

40 CFR 35.6570 - Use of the same engineer during subsequent phases of response.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Use of the same engineer during... Agreement § 35.6570 Use of the same engineer during subsequent phases of response. (a) If the public notice... CERCLA remedial response Cooperative Agreement may use the engineer procured to conduct any or all of the...

Sensitivity of negative subsequent memory and task-negative effects to age and associative memory performance.

PubMed

de Chastelaine, Marianne; Mattson, Julia T; Wang, Tracy H; Donley, Brian E; Rugg, Michael D

2015-07-01

The present fMRI experiment employed associative recognition to investigate the relationships between age and encoding-related negative subsequent memory effects and task-negative effects. Young, middle-aged and older adults (total n=136) were scanned while they made relational judgments on visually presented word pairs. In a later memory test, the participants made associative recognition judgments on studied, rearranged (items studied on different trials) and new pairs. Several regions, mostly localized to the default mode network, demonstrated negative subsequent memory effects in an across age-group analysis. All but one of these regions also demonstrated task-negative effects, although there was no correlation between the size of the respective effects. Whereas negative subsequent memory effects demonstrated a graded attenuation with age, task-negative effects declined markedly between the young and the middle-aged group, but showed no further reduction in the older group. Negative subsequent memory effects did not correlate with memory performance within any age group. By contrast, in the older group only, task-negative effects predicted later memory performance. The findings demonstrate that negative subsequent memory and task-negative effects depend on dissociable neural mechanisms and likely reflect distinct cognitive processes. The relationship between task-negative effects and memory performance in the older group might reflect the sensitivity of these effects to variations in amount of age-related neuropathology. This article is part of a Special Issue entitled SI: Memory. Copyright © 2014 Elsevier B.V. All rights reserved.

Planetary Radio Interferometry and Doppler Experiment (PRIDE) for Planetary Atmospheric Studies

NASA Astrophysics Data System (ADS)

Bocanegra Bahamon, Tatiana; Cimo, Giuseppe; Duev, Dmitry; Gurvits, Leonid; Molera Calves, Guifre; Pogrebenko, Sergei

2015-04-01

The Planetary Radio Interferometry and Doppler Experiment (PRIDE) is a technique that allows the determination of the radial velocity and lateral coordinates of planetary spacecraft with very high accuracy (Duev, 2012). The setup of the experiment consists of several ground stations from the European VLBI Network (EVN) located around the globe, which simultaneously perform Doppler tracking of a spacecraft carrier radio signal, and are subsequently processed in a VLBI-style in phase referencing mode. Because of the accurate examination of the changes in phase and amplitude of the radio signal propagating from the spacecraft to the multiple stations on Earth, the PRIDE technique can be used for several fields of planetary research, among which planetary atmospheric studies, gravimetry and ultra-precise celestial mechanics of planetary systems. In the study at hand the application of this technique for planetary atmospheric investigations is demonstrated. As a test case, radio occultation experiments were conducted with PRIDE having as target ESA's Venus Express, during different observing sessions with multiple ground stations in April 2012 and March 2014. Once each of the stations conducts the observation, the raw data is delivered to the correlation center at the Joint Institute for VLBI in Europe (JIVE) located in the Netherlands. The signals are processed with a high spectral resolution and phase detection software package from which Doppler observables of each station are derived. Subsequently the Doppler corrected signals are correlated to derive the VLBI observables. These two sets of observables are used for precise orbit determination. The reconstructed orbit along with the Doppler observables are used as input for the radio occultation processing software, which consists of mainly two modules, the geometrical optics module and the ray tracing inversion module, from which vertical density profiles, and subsequently, temperature and pressure profiles of Venus' atmosphere were derived. The demonstration of the capability of PRIDE as a radio science instrument for planetary atmospheric studies is developed in the framework of the upcoming ESA's JUICE mission to study Jupiter's system.

Family sources of educational gender inequality in rural china: A critical assessment

PubMed Central

Hannum, Emily; Kong, Peggy; Zhang, Yuping

2009-01-01

In this paper, we investigate the gender gap in education in rural northwest China. We first discuss parental perceptions of abilities and appropriate roles for girls and boys; parental concerns about old-age support; and parental perceptions of different labor market outcomes for girls' and boys' education. We then investigate gender disparities in investments in children, children's performance at school, and children's subsequent attainment. We analyze a survey of 9-12-year-old children and their families conducted in rural Gansu Province in the year 2000, along with follow-up information about subsequent educational attainment collected 7 years later. We complement our main analysis with two illustrative case studies of rural families drawn from 11 months of fieldwork conducted in rural Gansu between 2003 and 2005 by the second author. In 2000, most mothers expressed egalitarian views about girls' and boys' rights and abilities, in the abstract. However, the vast majority of mothers still expected to rely on sons for old-age support, and nearly one in five mothers interviewed agreed with the traditional saying, “Sending girls to school is useless since they will get married and leave home.” Compared to boys, girls faced somewhat lower (though still very high) maternal educational expectations and a greater likelihood of being called on for household chores than boys. However, there was little evidence of a gender gap in economic investments in education. Girls rivaled or outperformed boys in academic performance and engagement. Seven years later, boys had attained just about a third of a year more schooling than girls-a quite modest advantage that could not be fully explained by early parental attitudes and investments, or student performance or engagement. Fieldwork confirmed that parents of sons and daughters tended to have high aspirations for their children. Parents sometimes viewed boys as having greater aptitude, but tended to view girls as having more dedication-an attribute parents perceived as being critical for educational success. Findings suggest that at least in Gansu, rural parental educational attitudes and practices toward boys and girls are more complicated and less uniformly negative for girls than commonly portrayed. PMID:20161037

Family sources of educational gender inequality in rural china: A critical assessment.

PubMed

Hannum, Emily; Kong, Peggy; Zhang, Yuping

2009-09-01

In this paper, we investigate the gender gap in education in rural northwest China. We first discuss parental perceptions of abilities and appropriate roles for girls and boys; parental concerns about old-age support; and parental perceptions of different labor market outcomes for girls' and boys' education. We then investigate gender disparities in investments in children, children's performance at school, and children's subsequent attainment. We analyze a survey of 9-12-year-old children and their families conducted in rural Gansu Province in the year 2000, along with follow-up information about subsequent educational attainment collected 7 years later. We complement our main analysis with two illustrative case studies of rural families drawn from 11 months of fieldwork conducted in rural Gansu between 2003 and 2005 by the second author.In 2000, most mothers expressed egalitarian views about girls' and boys' rights and abilities, in the abstract. However, the vast majority of mothers still expected to rely on sons for old-age support, and nearly one in five mothers interviewed agreed with the traditional saying, "Sending girls to school is useless since they will get married and leave home." Compared to boys, girls faced somewhat lower (though still very high) maternal educational expectations and a greater likelihood of being called on for household chores than boys. However, there was little evidence of a gender gap in economic investments in education. Girls rivaled or outperformed boys in academic performance and engagement. Seven years later, boys had attained just about a third of a year more schooling than girls-a quite modest advantage that could not be fully explained by early parental attitudes and investments, or student performance or engagement. Fieldwork confirmed that parents of sons and daughters tended to have high aspirations for their children. Parents sometimes viewed boys as having greater aptitude, but tended to view girls as having more dedication-an attribute parents perceived as being critical for educational success. Findings suggest that at least in Gansu, rural parental educational attitudes and practices toward boys and girls are more complicated and less uniformly negative for girls than commonly portrayed.

Comments on the Operation of Capillary Pumped Loop Devices in Low Gravity

NASA Technical Reports Server (NTRS)

Hallinan, K. P.; Allen, J. S.

1999-01-01

The operation of Capillary Pumped Loops (CPL's) in low gravity has generally been unable to match ground-based performance. The reason for this poorer performance has been elusive. In order to investigate the behavior of a CPL in low-gravity, an idealized, glass CPL experiment was constructed. This experiment, known as the Capillary-driven Heat Transfer (CHT) experiment, was flown on board the Space Shuttle Columbia in July 1997 during the Microgravity Science Laboratory mission. During the conduct of the CHT experiment an unexpected failure mode was observed. This failure mode was a result of liquid collecting and then eventually bridging the vapor return line. With the vapor return line blocked, the condensate was unable to return to the evaporator and dry-out subsequently followed. The mechanism for this collection and bridging has been associated with long wavelength instabilities of the liquid film forming in the vapor return line. Analysis has shown that vapor line blockage in present generation CPL devices is inevitable. Additionally, previous low-gravity CPL tests have reported the presence of relatively low frequency pressure oscillations during erratic system performance. Analysis reveals that these pressure oscillations are in part a result of long wavelength instabilities present in the evaporator pores, which likewise lead to liquid bridging and vapor entrapment in the porous media. Subsequent evaporation to the trapped vapor increases the vapor pressure. Eventually the vapor pressure causes ejection of the bridged liquid. Recoil stresses depress the meniscus, the vapor pressure rapidly increases, and the heated surface cools. The process then repeats with regularity.

A Numerical Study of Factors Affecting Fracture-Fluid Cleanup and Produced Gas/Water in Marcellus Shale: Part II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seales, Maxian B.; Dilmore, Robert; Ertekin, Turgay

Horizontal wells combined with successful multistage-hydraulic-fracture treatments are currently the most-established method for effectively stimulating and enabling economic development of gas-bearing organic-rich shale formations. Fracture cleanup in the stimulated reservoir volume (SRV) is critical to stimulation effectiveness and long-term well performance. But, fluid cleanup is often hampered by formation damage, and post-fracture well performance frequently falls to less than expectations. A systematic study of the factors that hinder fracture-fluid cleanup in shale formations can help optimize fracture treatments and better quantify long-term volumes of produced water and gas. Fracture-fluid cleanup is a complex process influenced by mutliphase flow through porousmore » media (relative permeability hysteresis, capillary pressure), reservoir-rock and -fluid properties, fracture-fluid properties, proppant placement, fracture-treatment parameters, and subsequent flowback and field operations. Changing SRV and fracture conductivity as production progresses further adds to the complexity of this problem. Numerical simulation is the best and most-practical approach to investigate such a complicated blend of mechanisms, parameters, their interactions, and subsequent effect on fracture-fluid cleanup and well deliverability. Here, a 3D, two-phase, dual-porosity model was used to investigate the effect of mutliphase flow, proppant crushing, proppant diagenesis, shut-in time, reservoir-rock compaction, gas slippage, and gas desorption on fracture-fluid cleanup and well performance in Marcellus Shale. Our findings have shed light on the factors that substantially constrain efficient fracture-fluid cleanup in gas shales, and we have provided guidelines for improved fracture-treatment designs and water management.« less

A Numerical Study of Factors Affecting Fracture-Fluid Cleanup and Produced Gas/Water in Marcellus Shale: Part II

DOE PAGES

Seales, Maxian B.; Dilmore, Robert; Ertekin, Turgay; ...

2017-04-01

Horizontal wells combined with successful multistage-hydraulic-fracture treatments are currently the most-established method for effectively stimulating and enabling economic development of gas-bearing organic-rich shale formations. Fracture cleanup in the stimulated reservoir volume (SRV) is critical to stimulation effectiveness and long-term well performance. But, fluid cleanup is often hampered by formation damage, and post-fracture well performance frequently falls to less than expectations. A systematic study of the factors that hinder fracture-fluid cleanup in shale formations can help optimize fracture treatments and better quantify long-term volumes of produced water and gas. Fracture-fluid cleanup is a complex process influenced by mutliphase flow through porousmore » media (relative permeability hysteresis, capillary pressure), reservoir-rock and -fluid properties, fracture-fluid properties, proppant placement, fracture-treatment parameters, and subsequent flowback and field operations. Changing SRV and fracture conductivity as production progresses further adds to the complexity of this problem. Numerical simulation is the best and most-practical approach to investigate such a complicated blend of mechanisms, parameters, their interactions, and subsequent effect on fracture-fluid cleanup and well deliverability. Here, a 3D, two-phase, dual-porosity model was used to investigate the effect of mutliphase flow, proppant crushing, proppant diagenesis, shut-in time, reservoir-rock compaction, gas slippage, and gas desorption on fracture-fluid cleanup and well performance in Marcellus Shale. Our findings have shed light on the factors that substantially constrain efficient fracture-fluid cleanup in gas shales, and we have provided guidelines for improved fracture-treatment designs and water management.« less

Is team confidence the key to success? The reciprocal relation between collective efficacy, team outcome confidence, and perceptions of team performance during soccer games.

PubMed

Fransen, Katrien; Decroos, Steven; Vanbeselaere, Norbert; Vande Broek, Gert; De Cuyper, Bert; Vanroy, Jari; Boen, Filip

2015-01-01

The present manuscript extends previous research on the reciprocal relation between team confidence and perceived team performance in two ways. First, we distinguished between two types of team confidence; process-oriented collective efficacy and outcome-oriented team outcome confidence. Second, we assessed both types not only before and after the game, but for the first time also during half-time, thereby providing deeper insight into their dynamic relation with perceived team performance. Two field studies were conducted, each with 10 male soccer teams (N = 134 in Study 1; N = 125 in Study 2). Our findings provide partial support for the reciprocal relation between players' team confidence (both collective efficacy and team outcome confidence) and players' perceptions of the team's performance. Although both types of players' team confidence before the game were not significantly related to perceived team performance in the first half, players' team confidence during half-time was positively related to perceived team performance in the second half. Additionally, our findings consistently demonstrated a relation between perceived team performance and players' subsequent team confidence. Considering that team confidence is a dynamical process, which can be affected by coaches and players, our findings open new avenues to optimise team performance.

Thermal conductivity as influenced by the temperature and apparent viscosity of dairy products.

PubMed

Gonçalves, B J; Pereira, C G; Lago, A M T; Gonçalves, C S; Giarola, T M O; Abreu, L R; Resende, J V

2017-05-01

This study aimed to evaluate the rheological behavior and thermal conductivity of dairy products, composed of the same chemical components but with different formulations, as a function of temperature. Subsequently, thermal conductivity was related to the apparent viscosity of yogurt, fermented dairy beverage, and fermented milk. Thermal conductivity measures and rheological tests were performed at 5, 10, 15, 20, and 25°C using linear probe heating and an oscillatory rheometer with concentric cylinder geometry, respectively. The results were compared with those calculated using the parallel, series, and Maxwell-Eucken models as a function of temperature, and the discrepancies in the results are discussed. Linear equations were fitted to evaluate the influence of temperature on the thermal conductivity of the dairy products. The rheological behavior, specifically apparent viscosity versus shear rate, was influenced by temperature. Herschel-Bulkley, power law, and Newton's law models were used to fit the experimental data. The Herschel-Bulkley model best described the adjustments for yogurt, the power law model did so for fermented dairy beverages, and Newton's law model did so for fermented milk and was then used to determine the rheological parameters. Fermented milk showed a Newtonian trend, whereas yogurt and fermented dairy beverage were shear thinning. Apparent viscosity was correlated with temperature by the Arrhenius equation. The formulation influenced the effective thermal conductivity. The relationship between the 2 properties was established by fixing the temperature and expressing conductivity as a function of apparent viscosity. Thermal conductivity increased with viscosity and decreased with increasing temperature. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The effects of experimental pain and induced optimism on working memory task performance.

PubMed

Boselie, Jantine J L M; Vancleef, Linda M G; Peters, Madelon L

2016-07-01

Pain can interrupt and deteriorate executive task performance. We have previously shown that experimentally induced optimism can diminish the deteriorating effect of cold pressor pain on a subsequent working memory task (i.e., operation span task). In two successive experiments we sought further evidence for the protective role of optimism on pain-induced working memory impairments. We used another working memory task (i.e., 2-back task) that was performed either after or during pain induction. Study 1 employed a 2 (optimism vs. no-optimism)×2 (pain vs. no-pain)×2 (pre-score vs. post-score) mixed factorial design. In half of the participants optimism was induced by the Best Possible Self (BPS) manipulation, which required them to write and visualize about a life in the future where everything turned out for the best. In the control condition, participants wrote and visualized a typical day in their life (TD). Next, participants completed either the cold pressor task (CPT) or a warm water control task (WWCT). Before (baseline) and after the CPT or WWCT participants working memory performance was measured with the 2-back task. The 2-back task measures the ability to monitor and update working memory representation by asking participants to indicate whether the current stimulus corresponds to the stimulus that was presented 2 stimuli ago. Study 2 had a 2 (optimism vs. no-optimism)×2 (pain vs. no-pain) mixed factorial design. After receiving the BPS or control manipulation, participants completed the 2-back task twice: once with painful heat stimulation, and once without any stimulation (counter-balanced order). Continuous heat stimulation was used with temperatures oscillating around 1°C above and 1°C below the individual pain threshold. In study 1, the results did not show an effect of cold pressor pain on subsequent 2-back task performance. Results of study 2 indicated that heat pain impaired concurrent 2-back task performance. However, no evidence was found that optimism protected against this pain-induced performance deterioration. Experimentally induced pain impairs concurrent but not subsequent working memory task performance. Manipulated optimism did not counteract pain-induced deterioration of 2-back performance. It is important to explore factors that may diminish the negative impact of pain on the ability to function in daily life, as pain itself often cannot be remediated. We are planning to conduct future studies that should shed further light on the conditions, contexts and executive operations for which optimism can act as a protective factor. Copyright © 2016 Scandinavian Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

Impact of co-incorporating laminin peptide dopants and neurotrophic growth factors on conducting polymer properties.

PubMed

Green, Rylie A; Lovell, Nigel H; Poole-Warren, Laura A

2010-01-01

Conductive neural interfaces tailored for cell interaction by incorporation of bioactive factors are hypothesized to produce superior neuroprostheses with improved charge transfer capabilities. This study examined the effect of entrapping nerve growth factor (NGF) within the conducting polymer poly(ethylene dioxythiophene) (PEDOT) during electrodeposition to create a polymer capable of stimulating neurite outgrowth from proximal neural tissue. NGF entrapment was performed on polymers doped with laminin peptides DEDEDYFQRYLI and DCDPGYIGSR and, additionally, a conventional dopant, paratoluene sulphonate (pTS). All polymer coatings were analysed for a range of physical, electrical and mechanical properties, with the biological activity of ligands examined using a PC12 neurite outgrowth assay. NGF was successfully entrapped in PEDOT during electrodeposition and was shown to produce a softer interface than conventional conducting polymers and films without the NGF modification. However, it was found that the use of a peptide dopant combined with NGF entrapment resulted in polymers with diminished electrical and mechanical stability. Entrapped NGF was determined to be biologically active, with PEDOT/pTS/NGF producing neurite outgrowth comparable with control films where NGF was supplied via the medium. Future studies will determine the effect of typical neural prosthetic stimulation regimes on the release of neurotrophins and subsequent cell response.

Intelligent Monitoring? Assessing the ability of the Care Quality Commission's statistical surveillance tool to predict quality and prioritise NHS hospital inspections.

PubMed

Griffiths, Alex; Beaussier, Anne-Laure; Demeritt, David; Rothstein, Henry

2017-02-01

The Care Quality Commission (CQC) is responsible for ensuring the quality of the health and social care delivered by more than 30 000 registered providers in England. With only limited resources for conducting on-site inspections, the CQC has used statistical surveillance tools to help it identify which providers it should prioritise for inspection. In the face of planned funding cuts, the CQC plans to put more reliance on statistical surveillance tools to assess risks to quality and prioritise inspections accordingly. To evaluate the ability of the CQC's latest surveillance tool, Intelligent Monitoring (IM), to predict the quality of care provided by National Health Service (NHS) hospital trusts so that those at greatest risk of providing poor-quality care can be identified and targeted for inspection. The predictive ability of the IM tool is evaluated through regression analyses and χ 2 testing of the relationship between the quantitative risk score generated by the IM tool and the subsequent quality rating awarded following detailed on-site inspection by large expert teams of inspectors. First, the continuous risk scores generated by the CQC's IM statistical surveillance tool cannot predict inspection-based quality ratings of NHS hospital trusts (OR 0.38 (0.14 to 1.05) for Outstanding/Good, OR 0.94 (0.80 to -1.10) for Good/Requires improvement, and OR 0.90 (0.76 to 1.07) for Requires improvement/Inadequate). Second, the risk scores cannot be used more simply to distinguish the trusts performing poorly-those subsequently rated either 'Requires improvement' or 'Inadequate'-from the trusts performing well-those subsequently rated either 'Good' or 'Outstanding' (OR 1.07 (0.91 to 1.26)). Classifying CQC's risk bandings 1-3 as high risk and 4-6 as low risk, 11 of the high risk trusts were performing well and 43 of the low risk trusts were performing poorly, resulting in an overall accuracy rate of 47.6%. Third, the risk scores cannot be used even more simply to distinguish the worst performing trusts-those subsequently rated 'Inadequate'-from the remaining, better performing trusts (OR 1.11 (0.94 to 1.32)). Classifying CQC's risk banding 1 as high risk and 2-6 as low risk, the highest overall accuracy rate of 72.8% was achieved, but still only 6 of the 13 Inadequate trusts were correctly classified as being high risk. Since the IM statistical surveillance tool cannot predict the outcome of NHS hospital trust inspections, it cannot be used for prioritisation. A new approach to inspection planning is therefore required. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Effects of previous grazing nutrition and management on feedlot performance of cattle.

PubMed

Drouillard, J S; Kuhl, G L

1999-01-01

Management strategies designed to improve grazing animal performance can influence feedlot performance and carcass traits both positively and negatively. In spite of the economic relevance of potential interactions between grazing and finishing performance, controlled experiments evaluating integrated production systems are limited in number. Effects of grazing treatments can result from, or be overshadowed by, changes in gut fill, thus making it difficult to assign precise costs to different phases of production. Published reports have considered the effects of stocking rate, duration of grazing, forage characteristics, supplementation, and growth-promoting implants on subsequent finishing performance. Improvements in cattle performance attributed to changes in stocking rate generally have been neutral to positive with respect to effects on finishing performance. Comparisons among forages have led to the suggestion that forage species may contribute to differences in gastrointestinal fill of grazing cattle, thereby influencing gain and efficiency during the subsequent finishing phase. Creep-feeding suckling calves generally has increased preweaning performance but has had relatively little influence on performance during the subsequent finishing phase. Grain supplementation of stocker cattle during the grazing period has improved grazing performance, but effects on subsequent feedlot performance have been inconsistent. Potential carryover effects from protein and mineral supplementation also have been inconclusive. Lack of congruence among studies is puzzling but may be the consequence of highly varied production systems, differences in experimental procedures, and changes in gut fill or mass of internal organs. Based on the studies reviewed, the expression or absence of compensatory growth during the finishing phase appears to be related to the nutritional quality of forages utilized in the grazing period, with higher quality forages tending to yield greater compensatory effects. The bulk of evidence with suckling cattle and stocker implants suggests that effects on subsequent finishing performance are minimal. Attention is drawn to the noticeable lack of research pertaining to integrated production systems. A more thorough understanding of the interactions among grazing nutrition and management, finishing performance, and carcass traits is needed to facilitate greater economic exploitation of these relationships.

Relationships between day one piglet serum immunoglobulin immunocrit and subsequent growth, puberty attainment, litter size, and lactation performance

USDA-ARS?s Scientific Manuscript database

Colostrum affects gut and uterine gland development in the neonatal piglet, suggesting that subsequent growth and reproductive performance may be affected. Measuring immunoglobulin in piglet serum using the immunoglobulin immunocrit on day 1 of age provides a simple inexpensive indication of the amo...

Descriptive and Criterion-Referenced Self-Assessment with L2 Readers

ERIC Educational Resources Information Center

Brantmeier, Cindy; Vanderplank, Robert

2008-01-01

Brantmeier [Brantmeier, C., 2006. "Advanced L2 learners and reading placement: self-assessment, computer-based testing, and subsequent performance." 'System 34" (1), 15-35] found that self-assessment (SA) of second language (L2) reading ability is not an accurate predictor for computer-based testing or subsequent classroom performance. With 359…

The relationships between age, associative memory performance and the neural correlates of successful associative memory encoding

PubMed Central

de Chastelaine, Marianne; Mattson, Julia T.; Wang, Tracy H.; Donley, Brian E.; Rugg, Michael D.

2016-01-01

Using fMRI, subsequent memory effects (greater activity for later remembered than later forgotten study items) predictive of associative encoding were compared across samples of young, middle-aged and older adults (total n = 136). During scanning, participants studied visually presented word pairs. In a later test phase, they discriminated between studied pairs, ‘rearranged’ pairs (items studied on different trials) and new pairs. Subsequent memory effects were identified by contrasting activity elicited by study pairs that went on to be correctly judged intact or incorrectly judged rearranged. Effects in the hippocampus were age-invariant and positively correlated across participants with associative memory performance. Subsequent memory effects in the right IFG were greater in the older than the young group. In older participants only, both left and, in contrast to prior reports, right IFG subsequent memory effects correlated positively with memory performance. We suggest that the IFG is especially vulnerable to age-related decline in functional integrity, and that the relationship between encoding-related activity in right IFG and memory performance depends on the experimental context. PMID:27143433

Facile synthesis of NiAl-layered double hydroxide/graphene hybrid with enhanced electrochemical properties for detection of dopamine

NASA Astrophysics Data System (ADS)

Li, Meixia; Zhu, Jun E.; Zhang, Lili; Chen, Xu; Zhang, Huimin; Zhang, Fazhi; Xu, Sailong; Evans, David G.

2011-10-01

Layered double hydroxides (LDHs), also known as hydrotalcite-like anionic clays, have been investigated widely as promising electrochemical active materials. Due to the inherently weak conductivity, the electrochemical properties of LDHs were improved typically by utilization of either functional molecules intercalated between LDH interlayer galleries, or proteins confined between exfoliated LDH nanosheets. Here, we report a facile protocol to prepare NiAl-LDH/graphene (NiAl-LDH/G) nanocomposites using a conventional coprecipitation process under low-temperature conditions and subsequent reduction of the supporting graphene oxide. Electrochemical tests showed that the NiAl-LDH/G modified electrode exhibited highly enhanced electrochemical performance of dopamine electrooxidation in comparison with the pristine NiAl-LDH modified electrode. Results of high-resolution transmission electron microscopy and Raman spectra provide convincing information on the nanostructure and composition underlying the enhancement. Our results of the NiAl-LDH/G modified electrodes with the enhanced electrochemical performance may allow designing a variety of promising hybrid sensors via a simple and feasible approach.Layered double hydroxides (LDHs), also known as hydrotalcite-like anionic clays, have been investigated widely as promising electrochemical active materials. Due to the inherently weak conductivity, the electrochemical properties of LDHs were improved typically by utilization of either functional molecules intercalated between LDH interlayer galleries, or proteins confined between exfoliated LDH nanosheets. Here, we report a facile protocol to prepare NiAl-LDH/graphene (NiAl-LDH/G) nanocomposites using a conventional coprecipitation process under low-temperature conditions and subsequent reduction of the supporting graphene oxide. Electrochemical tests showed that the NiAl-LDH/G modified electrode exhibited highly enhanced electrochemical performance of dopamine electrooxidation in comparison with the pristine NiAl-LDH modified electrode. Results of high-resolution transmission electron microscopy and Raman spectra provide convincing information on the nanostructure and composition underlying the enhancement. Our results of the NiAl-LDH/G modified electrodes with the enhanced electrochemical performance may allow designing a variety of promising hybrid sensors via a simple and feasible approach. Electronic supplementary information (ESI) available: Fig. S1 showing 2D fast Fourier transform (FFT) image of NiAl-LDH phase in NiAl-LDH/G composites, and Fig. S2 showing CV curve of the pristine G modified electrode. See DOI: 10.1039/c1nr10592b.

Bench-Scale Evaluation of Hydrothermal Processing Technology for Conversion of Wastewater Solids to Fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marrone, Philip A.; Elliott, Douglas C.; Billing, Justin M.

Hydrothermal Liquefaction (HTL) and Catalytic Hydrothermal Gasification (CHG) proof-of-concept bench-scale tests were performed to assess the potential of hydrothermal treatment for handling municipal wastewater sludge. HTL tests were conducted at 300-350°C and 20 MPa on three different feeds: primary sludge, secondary sludge, and digested solids. Corresponding CHG tests were conducted at 350°C and 20 MPa on the HTL aqueous phase output using a ruthenium based catalyst. Biocrude yields ranged from 25-37%. Biocrude composition and quality were comparable to biocrudes generated from algae feeds. Subsequent hydrotreating of biocrude resulted in a product with comparable physical and chemical properties to crude oil.more » CHG product gas methane yields on a carbon basis ranged from 47-64%. Siloxane concentrations in the CHG product gas were below engine limits. The HTL-CHG process resulted in a chemical oxygen demand (COD) reduction of > 99.9% and a reduction in residual solids for disposal of 94-99%.« less

Study of Damage and Recovery of Electron Irradiated Polyimide using EPR and NMR Spectroscopy

NASA Astrophysics Data System (ADS)

Humagain, Sunita; Jhonson, Jessica; Stallworth, Phillip; Engelhart, Daniel; Plis, Elena; Ferguson, Dale; Cooper, Russell; Hoffmann, Ryan; Greenbaum, Steve

The main objective of this research is to probe radical concentrations in electron irradiated polyimide (PI, Kapton®) and to examine the impact on the electrical properties using EPR and NMR spectroscopy. PI is an electrical insulator used in space missions as a thermal management blanketing material, it is therefore critical for spacecraft designers to understand the nature of electron transport (electrical conductivity) within the bulk of the material. The recovery mechanism (radical evolution) of PI in vacuum, argon and air after having been subjected to 90 KeV electron irradiation, was studied. The formation and subsequent exponential decay of the radical concentrations was recorded using EPR. This signal decay agrees well with the recovery mechanism being probed by electrical conductivity measurements and implies a strong relation between the two. To investigate the distribution of radicals in the polymer, 1H NMR relaxation time (T1) were measured at 300MHz. Additional NMR experiments, in particular 13C, were performed to search for direct evidence of structural defects.

Evaluation of Bias-Variance Trade-Off for Commonly Used Post-Summarizing Normalization Procedures in Large-Scale Gene Expression Studies

PubMed Central

Qiu, Xing; Hu, Rui; Wu, Zhixin

2014-01-01

Normalization procedures are widely used in high-throughput genomic data analyses to remove various technological noise and variations. They are known to have profound impact to the subsequent gene differential expression analysis. Although there has been some research in evaluating different normalization procedures, few attempts have been made to systematically evaluate the gene detection performances of normalization procedures from the bias-variance trade-off point of view, especially with strong gene differentiation effects and large sample size. In this paper, we conduct a thorough study to evaluate the effects of normalization procedures combined with several commonly used statistical tests and MTPs under different configurations of effect size and sample size. We conduct theoretical evaluation based on a random effect model, as well as simulation and biological data analyses to verify the results. Based on our findings, we provide some practical guidance for selecting a suitable normalization procedure under different scenarios. PMID:24941114

Electrospun Carbon Nanofibers with in Situ Encapsulated Co₃O₄ Nanoparticles as Electrodes for High-Performance Supercapacitors.

PubMed

Abouali, Sara; Garakani, Mohammad Akbari; Zhang, Biao; Xu, Zheng-Long; Heidari, Elham Kamali; Huang, Jian-qiu; Huang, Jiaqiang; Kim, Jang-Kyo

2015-06-24

A facile electrospinning method with subsequent heat treatments is employed to prepare carbon nanofibers (CNFs) containing uniformly dispersed Co3O4 nanoparticles as electrodes for supercapacitors. The Co3O4/CNF electrodes with ∼68 wt % active particles deliver a remarkable capacitance of 586 F g(-1) at a current density of 1 A g(-1). When the current density is increased to 50 A g(-1), ∼66% of the original capacitance is retained. The electrodes also present excellent cyclic stability of 74% capacity retention after 2000 cycles at 2 A g(-1). These superior electrochemical properties are attributed to the uniform dispersion of active particles in the CNF matrix, which functions as a conductive support. The onionlike graphitic layers formed around the Co3O4 nanoparticles not only improve the electrical conductivity of the electrode but also prevent the separation of the nanoparticles from the carbon matrix.

Formative Ethnographic Research to Improve Evaluation of a Novel Water System in Ghana

PubMed Central

Alcorn, Ted E.; Opryszko, Melissa C.; Schwab, Kellogg J.

2011-01-01

The accessibility of potable water is fundamental to public health. A private for-profit company is installing kiosk-based drinking-water systems in rural and peri-urban villages in Ghana, and we evaluated their performance. Preceding an observational study to measure the effect of these kiosks on the incidence of water-related disease in recipient communities, we conducted ethnographic research to assess local water-related practices and the ways these practices would affect adoption of the new technology. We conducted fieldwork in two communities in Ghana and interviewed stakeholders throughout the water sector. Our findings illustrate the complexity of water-related behaviors and indicate several factors that may sustain disease transmission despite the presence of the new technology. This formative ethnographic research also improved the precision of our subsequent evaluation of the intervention by providing a site-specific, culturally-appropriate knowledge base. This study demonstrates the value of incorporating qualitative research techniques into evaluations of water-related projects. PMID:21540392

Abusive supervision and subordinate performance: Instrumentality considerations in the emergence and consequences of abusive supervision.

PubMed

Walter, Frank; Lam, Catherine K; van der Vegt, Gerben S; Huang, Xu; Miao, Qing

2015-07-01

Drawing from moral exclusion theory, this article examines outcome dependence and interpersonal liking as key boundary conditions for the linkage between perceived subordinate performance and abusive supervision. Moreover, it investigates the role of abusive supervision for subordinates' subsequent, objective work performance. Across 2 independent studies, an experimental scenario study (N = 157; Study 1) and a time-lagged field study (N = 169; Study 2), the negative relationship between perceived subordinate performance and abusive supervision was found to hinge on a supervisor's outcome dependence on subordinates but not on a supervisor's liking of subordinates. Furthermore, Study 2 demonstrated (a) a negative association between abusive supervision and subordinates' subsequent objective performance and (b) a conditional indirect effect of perceived performance on subsequent objective performance, through abusive supervision, contingent on the degree of outcome dependence, although these relationships did not reach conventional significance levels when controlling for prior objective performance. All in all, the findings highlight the role of instrumentality considerations in relation to abusive supervision and promote new knowledge on both origins and consequences of such supervisory behavior. (c) 2015 APA, all rights reserved).

A Systematic Review of Longitudinal Studies of Mathematics Difficulty.

PubMed

Nelson, Gena; Powell, Sarah R

2017-06-01

Some students may be diagnosed with a learning disability in mathematics or dyscalculia, whereas other students may demonstrate below-grade-level mathematics performance without a disability diagnosis. In the literature, researchers often identify students in both groups as experiencing math difficulty. To understand the performance of students with math difficulty, we examined 35 studies that reported longitudinal results of mathematics achievement (i.e., mathematics performance measured across at least a 12-month span). Our primary goal was to conduct a systematic review of these studies and to understand whether the growth of students with math difficulty was comparable or stagnant when compared with that of students without math difficulty. We also analyzed whether identification of math difficulty was predictive of mathematics achievement in later grades and whether a diagnosis of math difficulty was stable across grade levels. Results indicate that students with math difficulty demonstrate growth on mathematics measures, but this growth still leads to lower performance than that of students without math difficulty. Identification of math difficulty is strongly related to math performance in subsequent grades, and this diagnosis is often stable. Collectively, this literature indicates that students with math difficulty continue to struggle with mathematics in later grades.

Prestimulus default mode activity influences depth of processing and recognition in an emotional memory task.

PubMed

Soravia, Leila M; Witmer, Joëlle S; Schwab, Simon; Nakataki, Masahito; Dierks, Thomas; Wiest, Roland; Henke, Katharina; Federspiel, Andrea; Jann, Kay

2016-03-01

Low self-referential thoughts are associated with better concentration, which leads to deeper encoding and increases learning and subsequent retrieval. There is evidence that being engaged in externally rather than internally focused tasks is related to low neural activity in the default mode network (DMN) promoting open mind and the deep elaboration of new information. Thus, reduced DMN activity should lead to enhanced concentration, comprehensive stimulus evaluation including emotional categorization, deeper stimulus processing, and better long-term retention over one whole week. In this fMRI study, we investigated brain activation preceding and during incidental encoding of emotional pictures and on subsequent recognition performance. During fMRI, 24 subjects were exposed to 80 pictures of different emotional valence and subsequently asked to complete an online recognition task one week later. Results indicate that neural activity within the medial temporal lobes during encoding predicts subsequent memory performance. Moreover, a low activity of the default mode network preceding incidental encoding leads to slightly better recognition performance independent of the emotional perception of a picture. The findings indicate that the suppression of internally-oriented thoughts leads to a more comprehensive and thorough evaluation of a stimulus and its emotional valence. Reduced activation of the DMN prior to stimulus onset is associated with deeper encoding and enhanced consolidation and retrieval performance even one week later. Even small prestimulus lapses of attention influence consolidation and subsequent recognition performance. © 2015 Wiley Periodicals, Inc.

Spike Phase Locking in CA1 Pyramidal Neurons depends on Background Conductance and Firing Rate

PubMed Central

Broiche, Tilman; Malerba, Paola; Dorval, Alan D.; Borisyuk, Alla; Fernandez, Fernando R.; White, John A.

2012-01-01

Oscillatory activity in neuronal networks correlates with different behavioral states throughout the nervous system, and the frequency-response characteristics of individual neurons are believed to be critical for network oscillations. Recent in vivo studies suggest that neurons experience periods of high membrane conductance, and that action potentials are often driven by membrane-potential fluctuations in the living animal. To investigate the frequency-response characteristics of CA1 pyramidal neurons in the presence of high conductance and voltage fluctuations, we performed dynamic-clamp experiments in rat hippocampal brain slices. We drove neurons with noisy stimuli that included a sinusoidal component ranging, in different trials, from 0.1 to 500 Hz. In subsequent data analysis, we determined action potential phase-locking profiles with respect to background conductance, average firing rate, and frequency of the sinusoidal component. We found that background conductance and firing rate qualitatively change the phase-locking profiles of CA1 pyramidal neurons vs. frequency. In particular, higher average spiking rates promoted band-pass profiles, and the high-conductance state promoted phase-locking at frequencies well above what would be predicted from changes in the membrane time constant. Mechanistically, spike-rate adaptation and frequency resonance in the spike-generating mechanism are implicated in shaping the different phase-locking profiles. Our results demonstrate that CA1 pyramidal cells can actively change their synchronization properties in response to global changes in activity associated with different behavioral states. PMID:23055508

Normal ranges for fetal electrocardiogram values for the healthy fetus of 18-24 weeks of gestation: a prospective cohort study.

PubMed

Verdurmen, Kim M J; Lempersz, Carlijn; Vullings, Rik; Schroer, Christian; Delhaas, Tammo; van Laar, Judith O E H; Oei, S Guid

2016-08-17

The fetal anomaly ultrasound only detects 65 to 81 % of the patients with congenital heart disease, making it the most common structural fetal anomaly of which a significant part is missed during prenatal life. Therefore, we need a reliable non-invasive diagnostic method which improves the predictive value for congenital heart diseases early in pregnancy. Fetal electrocardiography could be this desired diagnostic method. There are multiple technical challenges to overcome in the conduction of the fetal electrocardiogram. In addition, interpretation is difficult due to the organisation of the fetal circulation in utero. We want to establish the normal ranges and values of the fetal electrocardiogram parameters in healthy fetuses of 18 to 24 weeks of gestation. Women with an uneventful singleton pregnancy between 18 and 24 weeks of gestation are asked to participate in this prospective cohort study. A certified and experienced sonographist performs the fetal anomaly scan. Subsequently, a fetal electrocardiogram recording is performed using dedicated signal processing methods. Measurements are performed at two institutes. We will include 300 participants to determine the normal values and 95 % confidence intervals of the fetal electrocardiogram parameters in a healthy fetus. We will evaluate the fetal heart rate, segment intervals, normalised amplitude and the fetal heart axis. Three months postpartum, we will evaluate if a newborn is healthy through a questionnaire. Fetal electrocardiography could be a promising tool in the screening program for congenital heart diseases. The electrocardiogram is a depiction of the intimate relationship between the cardiac nerve conduction pathways and the structural morphology of the fetal heart, and therefore particularly suitable for the detection of secondary effects due to a congenital heart disease (hypotrophy, hypertrophy and conduction interruption).

Multiple Transportable Carbohydrates During Exercise: Current Limitations and Directions for Future Research.

PubMed

Wilson, Patrick B

2015-07-01

The concept of multiple transportable carbohydrates (MTC) refers to a combination of saccharides that rely on distinct transporters for intestinal absorption. Ingestion of MTC during prolonged exercise has been purported to increase carbohydrate absorption efficiency, increase exogenous carbohydrate oxidation, reduce gastrointestinal (GI) distress, and improve athletic performance when carbohydrate intake is high (>50-60 g·h⁻¹). Although reviews of MTC research have been published previously, a comprehensive literature evaluation underscoring methodological limitations has not been conducted to guide future work. Accordingly, this review outlined the plausible mechanisms of MTC and subsequently evaluated MTC research based on several factors, including participant characteristics, exercise modality, exercise task, treatment formulation, treatment blinding, and pre-exercise nutrition status. A total of 27 articles examining MTC during exercise were identified and reviewed. Overall, ingestion of MTC led to increased exogenous carbohydrate oxidation, reduced GI distress, and improved performance during cycling lasting ≥2.5 hours, particularly when carbohydrate was ingested at ≥1.2 g·min⁻¹. Despite the apparent benefits, several limitations in the literature were apparent, including that only 3 studies used running, only 2 studies were conducted in the field, most participants were fasted, and women and adolescents were underrepresented. In addition, the majority of the studies fed carbohydrate at ≥1.2 g·min⁻¹, which may have inflated levels of GI distress and exaggerated performance decrements with single-saccharide feedings. Based on these limitations, future MTC investigations should consider focusing on running, examining team-based sports, including women and adolescents, conducting experiments under field conditions, examining the modifying effects of pre-exercise nutrition, and using modest feeding protocols (1.0-1.2 g·min⁻¹).

Physiological improvement with moderate exercise in type II diabetic neuropathy.

PubMed

Fisher, M A; Langbein, W E; Collins, E G; Williams, K; Corzine, L

2007-01-01

The objective of this study was to demonstrate improvement in nerve function with moderate exercise in patients with type II diabetic neuropathies. Fives subjects with type II diabetes mellitus and distal, predominantly sensory polyneuropathies were studied. The subjects completed an 8-week program of a supervised moderate exercise program (40-75% of maximal 02 uptake reserve) with a subsequent 16-week program of monitored similar exercise. The same experienced electrophysiologist performed the electrodiagnostic studies both before and after the 24-week exercise period. These studies monitored physiological changes (conduction velocities, response amplitudes) in motor and sensory fibers as well as F-wave latencies. The exercise program produced a documented increase in aerobic exercise capacity. Despite the small number of subjects studied and the relatively short exercise period, there was a statistically significant improvement in nearly all electrophysiological parameters evaluated post exercise including motor conduction velocities and amplitudes, sensory conduction velocities, and F-wave latencies. This improvement included a statistically significant improvement in absolute median motor evoked response amplitudes as well as the recording of sensory nerve action potentials not present prior to exercise. There were no adverse effects from the exercise. This study supports the hypothesis that exercise can be performed safely in patients with type II diabetic neuropathies and can produce improvement in their nerve function. This study also supports the hypothesis that ischemia may have a meaningful role in the pathogenesis of neuropathies in patients with type II diabetes mellitus.

Unique Associations between Childhood Temperament Characteristics and Subsequent Psychopathology Symptom Trajectories from Childhood to Early Adolescence.

PubMed

Forbes, Miriam K; Rapee, Ronald M; Camberis, Anna-Lisa; McMahon, Catherine A

2017-08-01

Existing research suggests that temperamental traits that emerge early in childhood may have utility for early detection and intervention for common mental disorders. The present study examined the unique relationships between the temperament characteristics of reactivity, approach-sociability, and persistence in early childhood and subsequent symptom trajectories of psychopathology (depression, anxiety, conduct disorder, and attention-deficit hyperactivity disorder; ADHD) from childhood to early adolescence. Data were from the first five waves of the older cohort from the Longitudinal Study of Australian Children (n = 4983; 51.2% male), which spanned ages 4-5 to 12-13. Multivariate ordinal and logistic regressions examined whether parent-reported child temperament characteristics at age 4-5 predicted the study child's subsequent symptom trajectories for each domain of psychopathology (derived using latent class growth analyses), after controlling for other presenting symptoms. Temperament characteristics differentially predicted the symptom trajectories for depression, anxiety, conduct disorder, and ADHD: Higher levels of reactivity uniquely predicted higher symptom trajectories for all 4 domains; higher levels of approach-sociability predicted higher trajectories of conduct disorder and ADHD, but lower trajectories of anxiety; and higher levels of persistence were related to lower trajectories of conduct disorder and ADHD. These findings suggest that temperament is an early identifiable risk factor for the development of psychopathology, and that identification and timely interventions for children with highly reactive temperaments in particular could prevent later mental health problems.

Dual Pathways from Reactive Aggression to Depressive Symptoms in Children: Further Examination of the Failure Model.

PubMed

Evans, Spencer C; Fite, Paula J

2018-04-13

The failure model posits that peer rejection and poor academic performance are dual pathways in the association between early aggressive behavior and subsequent depressive symptoms. We examined this model using an accelerated longitudinal design while also incorporating proactive and reactive aggression and gender moderation. Children in 1st, 3rd, and 5th grades (n = 912; ages 6-12; 48% female) were rated three times annually by their primary teachers on measures of proactive and reactive aggression, peer rejection, academic performance, and depressive symptoms. Using Bayesian cross-classified estimation to account for nested and planned-missing data, path models were estimated to examine whether early reactive aggression predicted subsequent peer rejection and academic performance, and whether these, in turn, predicted subsequent depressive symptoms. From 1st to 3rd grade, reactive aggression predicted peer rejection (not academic performance), proactive aggression predicted academic performance (not peer rejection), and academic performance and peer rejection both predicted depressive symptoms. From 3rd to 5th grade, however, neither peer rejection nor academic performance predicted subsequent depressive symptoms. Results were not moderated by gender. Overall, these findings provide mixed and limited support for the failure model among school-age children. Early reactive aggression may be a key risk factor for social problems, whereas proactive aggression may be linked to improved academic functioning. The "dual pathways" of peer rejection and academic performance may operate during early but not later elementary school. Limitations and implications are discussed.

Site-Specific Analyses for Demonstrating Compliance with 10 CFR 61 Performance Objectives - 12179

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grossman, C.J.; Esh, D.W.; Yadav, P.

2012-07-01

The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its regulations at 10 CFR Part 61 to require low-level radioactive waste disposal facilities to conduct site-specific analyses to demonstrate compliance with the performance objectives in Subpart C. The amendments would require licensees to conduct site-specific analyses for protection of the public and inadvertent intruders as well as analyses for long-lived waste. The amendments would ensure protection of public health and safety, while providing flexibility to demonstrate compliance with the performance objectives, for current and potential future waste streams. NRC staff intends to submit proposed rule language and associated regulatorymore » basis to the Commission for its approval in early 2012. The NRC staff also intends to develop associated guidance to accompany any proposed amendments. The guidance is intended to supplement existing low-level radioactive waste guidance on issues pertinent to conducting site-specific analyses to demonstrate compliance with the performance objectives. The guidance will facilitate implementation of the proposed amendments by licensees and assist competent regulatory authorities in reviewing the site-specific analyses. Specifically, the guidance provides staff recommendations on general considerations for the site-specific analyses, modeling issues for assessments to demonstrate compliance with the performance objectives including the performance assessment, intruder assessment, stability assessment, and analyses for long-lived waste. This paper describes the technical basis for changes to the rule language and the proposed guidance associated with implementation of the rule language. The NRC staff, per Commission direction, intends to propose amendments to 10 CFR Part 61 to require licensees to conduct site-specific analyses to demonstrate compliance with performance objectives for the protection of public health and the environment. The amendments would require a performance assessment to demonstrate protection of the general population from releases of radioactivity, an assessment to demonstrate protection of a potential inadvertent intruder, and a long-term analysis to assess how the design of the facility considers the potential radiological impacts associated with disposal of long-lived waste streams. Concurrently, the NRC staff intends to propose associated guidance to facilitate the implementation of the requirements to conduct site-specific analyses. In proposing these amendments to the regulation and associated guidance, the NRC staff has conducted extensive public outreach since 2009 including three public meetings and four briefings of the NRC's Advisory Committee on Reactor Safeguards. The NRC staff plans to submit the proposed amendments to the regulations to the Commission in early 2012. Subsequently, the proposed amendments and associated guidance would be published in the Federal Register for public comment pending approval of the proposed amendments to the regulations by the Commission. Following the public comment period, NRC staff plans to address public comments and revise, as necessary, the regulations and associated guidance before publishing a final rule, which is anticipated in 2013. (authors)« less

The Impact of Participating in a Peer Assessment Activity on Subsequent Academic Performance

ERIC Educational Resources Information Center

Jhangiani, Rajiv S.

2016-01-01

The present study investigates the impact of participation in a peer assessment activity on subsequent academic performance. Students in two sections of an introductory psychology course completed a practice quiz 1 week prior to each of three course exams. Students in the experimental group participated in a five-step double-blind peer assessment…

The Risk of Bias in Randomized Trials in General Dentistry Journals.

PubMed

Hinton, Stephanie; Beyari, Mohammed M; Madden, Kim; Lamfon, Hanadi A

2015-01-01

The use of a randomized controlled trial (RCT) research design is considered the gold standard for conducting evidence-based clinical research. In this present study, we aimed to assess the quality of RCTs in dentistry and create a general foundation for evidence-based dentistry on which to perform subsequent RCTs. We conducted a systematic assessment of bias of RCTs in seven general dentistry journals published between January 2011 and March 2012. We extracted study characteristics in duplicate and assessed each trial's quality using the Cochrane Risk of Bias tool. We compared risk of bias across studies graphically. Among 1,755 studies across seven journals, we identified 67 RCTs. Many included studies were conducted in Europe (39%), with an average sample size of 358 participants. These studies included 52% female participants and the maximum follow-up period was 13 years. Overall, we found a high percentage of unclear risk of bias among included RCTs, indicating poor quality of reporting within the included studies. An overall high proportion of trials with an "unclear risk of bias" suggests the need for better quality of reporting in dentistry. As such, key concepts in dental research and future trials should focus on high-quality reporting.

Small Launch Vehicle Concept Development for Affordable Multi-Stage Inline Configurations

NASA Technical Reports Server (NTRS)

Beers, Benjamin R.; Waters, Eric D.; Philips, Alan D.; Threet, Grady E., Jr.

2014-01-01

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center conducted a study of two configurations of a three-stage, inline, liquid propellant small launch vehicle concept developed on the premise of maximizing affordability by targeting a specific payload capability range based on current and future industry demand. The initial configuration, NESC-1, employed liquid oxygen as the oxidizer and rocket propellant grade kerosene as the fuel in all three stages. The second and more heavily studied configuration, NESC-4, employed liquid oxygen and rocket propellant grade kerosene on the first and second stages and liquid oxygen and liquid methane fuel on the third stage. On both vehicles, sensitivity studies were first conducted on specific impulse and stage propellant mass fraction in order to baseline gear ratios and drive the focus of concept development. Subsequent sensitivity and trade studies on the NESC-4 concept investigated potential impacts to affordability due to changes in gross liftoff mass and/or vehicle complexity. Results are discussed at a high level to understand the impact severity of certain sensitivities and how those trade studies conducted can either affect cost, performance, or both.

Design, fabrication, and performance analysis of GaN vertical electron transistors with a buried p/n junction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeluri, Ramya, E-mail: ramyay@ece.ucsb.edu; Lu, Jing; Keller, Stacia

2015-05-04

The Current Aperture Vertical Electron Transistor (CAVET) combines the high conductivity of the two dimensional electron gas channel at the AlGaN/GaN heterojunction with better field distribution offered by a vertical design. In this work, CAVETs with buried, conductive p-GaN layers as the current blocking layer are reported. The p-GaN layer was regrown by metalorganic chemical vapor deposition and the subsequent channel regrowth was done by ammonia molecular beam epitaxy to maintain the p-GaN conductivity. Transistors with high ON current (10.9 kA/cm{sup 2}) and low ON-resistance (0.4 mΩ cm{sup 2}) are demonstrated. Non-planar selective area regrowth is identified as the limiting factormore » to transistor breakdown, using planar and non-planar n/p/n structures. Planar n/p/n structures recorded an estimated electric field of 3.1 MV/cm, while non-planar structures showed a much lower breakdown voltage. Lowering the p-GaN regrowth temperature improved breakdown in the non-planar n/p/n structure. Combining high breakdown voltage with high current will enable GaN vertical transistors with high power densities.« less

Medication discrepancies associated with subsequent pharmacist-performed medication reconciliations in an ambulatory clinic.

PubMed

Philbrick, Ann M; Harris, Ila M; Schommer, Jon C; Fallert, Christopher J

2015-01-01

To describe the number of medication discrepancies associated with subsequent medication reconciliations by a clinical pharmacist in an ambulatory family medicine clinic and the proportion of subsequent medication reconciliation visits that were associated with hospital discharge, long-term anticoagulation management, or both. Data on medication reconciliations were collected over a 2-year time period in an ambulatory family medicine clinic for patients taking 10 or more medications. Medication reconciliation was performed 752 times for 500 patients. A total of 5,046 discrepancies were identified, with more than one-half deemed clinically important. A mean (± SD) of 6.7 ± 4.6 discrepancies per visit (3.5 ± 3.2 clinically important) were identified. The findings showed that the distribution of total discrepancies identified by pharmacist-performed medication reconciliation was significantly different over the course of subsequent medication reconciliations. However, the distribution of clinically important discrepancies was not significantly different; important discrepancies were as likely to be found in later reconciliations as in earlier ones. As subsequent medication reconciliation visits were performed, an increasing proportion consisted of post-hospital discharge visits, long-term anticoagulation managed by a clinical pharmacist, or both. Patients with a recent hospital discharge, on long-term anticoagulation management, or both, were more likely to have multiple sessions with a clinical pharmacist for medication reconciliation. These findings can help identify patients for whom medication reconciliation is warranted.

Daily online testing in large classes: boosting college performance while reducing achievement gaps.

PubMed

Pennebaker, James W; Gosling, Samuel D; Ferrell, Jason D

2013-01-01

An in-class computer-based system, that included daily online testing, was introduced to two large university classes. We examined subsequent improvements in academic performance and reductions in the achievement gaps between lower- and upper-middle class students in academic performance. Students (N = 901) brought laptop computers to classes and took daily quizzes that provided immediate and personalized feedback. Student performance was compared with the same data for traditional classes taught previously by the same instructors (N = 935). Exam performance was approximately half a letter grade above previous semesters, based on comparisons of identical questions asked from earlier years. Students in the experimental classes performed better in other classes, both in the semester they took the course and in subsequent semester classes. The new system resulted in a 50% reduction in the achievement gap as measured by grades among students of different social classes. These findings suggest that frequent consequential quizzing should be used routinely in large lecture courses to improve performance in class and in other concurrent and subsequent courses.

Practical session assessments in human anatomy: Weightings and performance.

PubMed

McDonald, Aaron C; Chan, Siew-Pang; Schuijers, Johannes A

2016-07-08

Assessment weighting within a given module can be a motivating factor for students when deciding on their commitment level and time given to study a specific topic. In this study, an analysis of assessment performances of second year anatomy students was performed over four years to determine if (1) students performed better when a higher weighting was given to a set of practical session assessments and (2) whether an improved performance in the practical session assessments had a carry-over effect on other assessment tasks within that anatomy module and/or other anatomy modules that follow. Results showed that increasing the weighting of practical session assessments improved the average mark in that assessment and also improved the percentage of students passing that assessment. Further, it significantly improved performance in the written end-semester examination within the same module and had a carry-over effect on the anatomy module taught in the next teaching period, as students performed better in subsequent practical session assessments as well as subsequent end-semester examinations. It was concluded that the weighting of assessments had significant influences on a student's performance in that, and subsequent, assessments. It is postulated that practical session assessments, designed to develop deep learning skills in anatomy, improved efficacy in student performance in assessments undertaken in that and subsequent anatomy modules when the weighting of these assessments was greater. These deep learning skills were also transferable to other methods of assessing anatomy. Anat Sci Educ 9: 330-336. © 2015 American Association of Anatomists. © 2015 American Association of Anatomists.

Influences of tobacco advertising exposure and conduct problems on smoking behaviors among adolescent males and females.

PubMed

Mays, Darren; Gilman, Stephen E; Rende, Richard; Luta, George; Tercyak, Kenneth P; Niaura, Raymond S

2014-06-01

Adolescents with conduct problems are more likely to smoke, and tobacco advertising exposure may exacerbate this risk. Males' excess risk for conduct problems and females' susceptibility to advertising suggest gender-specific pathways to smoking. We investigated the associations between gender, conduct problems, and lifetime smoking and adolescents' exposure to tobacco advertising, and we examined prospective relationships with smoking behaviors. Adolescents completed baseline (2001-2004; n = 541) and 5-year follow-up (2007-2009; n =320) interviews for a family study of smoking risk. Baseline interviews assessed conduct problems and tobacco advertising exposure; smoking behavior was assessed at both timepoints. Generalized linear models analyzed gender differences in the relationship between conduct problems, advertising exposure, and smoking behavior at baseline and longitudinally. At baseline, among males, conduct problems were associated with greater advertising exposure independent of demographics and lifetime smoking. Among females at baseline, conduct problems were associated with greater advertising exposure only among never-smokers after adjusting for demographics. In longitudinal analyses, baseline advertising exposure predicted subsequent smoking initiation (i.e., smoking their first cigarette between baseline and follow-up) for females but not for males. Baseline conduct problems predicted current (i.e., daily or weekly) smoking at follow-up for all adolescents in adjusted models. The findings of this study reinforce that conduct problems are a strong predictor of subsequent current smoking for all adolescents and reveal important differences between adolescent males and females in the relationship between conduct problems, tobacco advertising behavior, and smoking behavior. The findings suggest gender-specific preventive interventions targeting advertising exposure may be warranted.

Self-focused attention affects subsequent processing of positive (but not negative) performance appraisals.

PubMed

Holzman, Jacob B; Valentiner, David P

2016-03-01

Cognitive-behavioral models highlight the conjoint roles of self-focused attention (SFA), post-event processing (PEP), and performance appraisals in the maintenance of social anxiety. SFA, PEP, and biased performance appraisals are related to social anxiety; however, limited research has examined how SFA affects information-processing following social events. The current study examined whether SFA affects the relationships between performance appraisals and PEP following a social event.. 137 participants with high (n = 72) or low (n = 65) social anxiety were randomly assigned to conditions of high SFA or low SFA while engaging in a standardized social performance. Subsequent performance appraisals and PEP were measured. Immediate performance appraisals were not affected by SFA. High levels of SFA led to a stronger, inverse relationship between immediate positive performance appraisals and subsequent negative PEP. High levels of SFA also led to a stronger, inverse relationship between negative PEP and changes in positive performance appraisals.. Future research should examine whether the current findings, which involved a standardized social performance event, extend to interaction events as well as in a clinical sample. These findings suggest that SFA affects the processing of positive information following a social performance event. SFA is particularly important for understanding how negative PEP undermines positive performance appraisals.. Published by Elsevier Ltd.

A nitrogen-doped 3D hierarchical carbon/sulfur composite for advanced lithium sulfur batteries

NASA Astrophysics Data System (ADS)

Liu, Xiaoyan; Huang, Wenlong; Wang, Dongdong; Tian, Jianhua; Shan, Zhongqiang

2017-07-01

Hybrid nanostructures containing one-dimensional (1D) carbon nanotubes (CNTs) and three-dimensional (3D) mesoporous carbon sphere have many promising applications due to their unique physical chemical properties. In this study, a novel 3D hierarchical carbon material (MCCNT) composed of mesoporous carbon sphere core and nitrogen rich CNTs shell is successfully prepared via an aerosol spray and subsequent chemical vapor deposition (CVD) processes. Owning to its well defined porous structure and favorable conductive framework, MCCNT is used as a potential sulfur host in lithium sulfur batteries through a classic melt-diffusion method. When cycled at a current density of 0.2 C (1 C = 1675 mA h g-1), it delivers an initial capacity as high as 1438.7 mAh g-1. Even if the current density increase to 1 C, the specific capacity still remain up to 534.6 mAh g-1 after 300 cycles. The enhanced electrochemical performance can be attributed to the hybrid structure of MCCNT, in which, the porous core works as a host to confine sulfur and accommodate volume expansion and the external CNTs provide excellent electron and ion conductive frame work. Furthermore, the in-situ doped nitrogen on the surface of CNTs enables effective trapping of lithium polysulfides, leading to a much-improved cycling performance.

Analysis of the vibrations of the low power ORC turbines operating under conditions of strongly developed hydrodynamic instability

NASA Astrophysics Data System (ADS)

Kiciński, Jan

2018-01-01

The paper presents the results of the analysis of the dynamic performance of the rotor being a component of the ORC turbine set with the net electrical output of 100 kW and the nominal speed of 9000 rpm. The research was conducted using tools capable of performing the necessary simulation of the system operating under highly unstable conditions, i.e., in a strongly nonlinear regime. In this regard, the author of the paper followed the subsequent phases of whirl/whip formation manifested in the fluid film. Constructional solutions within the scope of the bearing were examined with non-conventional lubricating mediums (low boiling mediums). On the basis of those scientific studies, the decision to build a working prototype of the machine was taken. Such a prototype has already been manufactured, having regard to the outcome of the conducted analyses. The research presented herein produced interesting results showing that, under the conditions of hydrodynamic instability, the phenomena taking place inside the lubricating gap of the slide bearing are not recurrent for each individual rotor revolution, notwithstanding the fact that the external excitation forces acting on the system are fully repeatable. The research tools were presented that allow a detailed qualitative and quantitative description of such phenomena.

Hollow cathode heater development for the Space Station plasma contactor

NASA Technical Reports Server (NTRS)

Soulas, George C.

1993-01-01

A hollow cathode-based plasma contactor has been selected for use on the Space Station. During the operation of the plasma contactor, the hollow cathode heater will endure approximately 12000 thermal cycles. Since a hollow cathode heater failure would result in a plasma contactor failure, a hollow cathode heater development program was established to produce a reliable heater design. The development program includes the heater design, process documents for both heater fabrication and assembly, and heater testing. The heater design was a modification of a sheathed ion thruster cathode heater. Three heaters have been tested to date using direct current power supplies. Performance testing was conducted to determine input current and power requirements for achieving activation and ignition temperatures, single unit operational repeatability, and unit-to-unit operational repeatability. Comparisons of performance testing data at the ignition input current level for the three heaters show the unit-to-unit repeatability of input power and tube temperature near the cathode tip to be within 3.5 W and 44 degrees C, respectively. Cyclic testing was then conducted to evaluate reliability under thermal cycling. The first heater, although damaged during assembly, completed 5985 ignition cycles before failing. Two additional heaters were subsequently fabricated and have completed 3178 cycles to date in an on-going test.

Electrochemical treatment of cork boiling wastewater with a boron-doped diamond anode.

PubMed

Fernandes, Annabel; Santos, Diana; Pacheco, Maria José; Ciríaco, Lurdes; Simões, Rogério; Gomes, Arlindo C; Lopes, Ana

2015-01-01

Anodic oxidation at a boron-doped diamond anode of cork boiling wastewater was successfully used for mineralization and biodegradability enhancement required for effluent discharge or subsequent biological treatment, respectively. The influence of the applied current density (30-70 mA/cm2) and the background electrolyte concentration (0-1.5 g/L Na2SO4) on the performance of the electrochemical oxidation was investigated. The supporting electrolyte was required to achieve conductivities that enabled anodic oxidation at the highest current intensities applied. The results indicated that pollutant removal increased with the applied current density, and after 8 h, reductions greater than 90% were achieved for COD, dissolved organic carbon, total phenols and colour. The biodegradability enhancement was from 0.13 to 0.59 and from 0.23 to 0.72 for the BOD/COD ratios with BOD of 5 and 20 days' incubation period, respectively. The tests without added electrolyte were performed at lower applied electrical charges (15 mA/cm2 or 30 V) with good organic load removal (up to 80%). For an applied current density of 30 mA/cm2, there was a minimum of electric conductivity of 1.9 mS/cm (corresponding to 0.75 g/L of Na2SO4), which minimized the specific energy consumption.

Synthesis and characterization of three-dimensional MoS2@carbon fibers hierarchical architecture with high capacity and high mass loading for Li-ion batteries.

PubMed

Shan, Xinyuan; Zhang, Shen; Zhang, Na; Chen, Yujin; Gao, Hong; Zhang, Xitian

2018-01-15

Three-dimensional (3D) MoS 2 @carbon fibers (CFs) hierarchical architectures are successfully synthesized via a simple hydrothermal method and subsequent annealing. MoS 2 nanoflakes are grown on the twine carbon fibers of the carbonized waste cotton cloth. The twine CFs can provide a short diffusion path for ions in electrolyte, enhance the specific surface area, and improve the conductivity of the 3D MoS 2 @CFs hierarchical architectures with high mass loading of 4.4mgcm -2 . The 3D MoS 2 @CFs hierarchical architectures as the electrode material can achieve a high reversible areal capacity (5.2mAhcm -2 at 2.5mAcm -2 ) and exhibit an excellent rate performance. In addition, CFs are prepared by simply carbonizing the waste cotton and then used as carbon source, which is low-cost and eco-friendly. We also found that the Mo nanoparticles produced during the charge/discharge process exist in the hierarchical architectures during cycling and can improve the conductivity of the entire system as well as the cycling stability. Therefore, MoS 2 @CFs nanocomposites as electrode materials manifest a significant application potential for high-performance Li-ion batteries. Copyright © 2017 Elsevier Inc. All rights reserved.

Pericardial Fat is Associated With Atrial Conduction: The Framingham Heart Study

PubMed Central

Friedman, Daniel J.; Wang, Na; Meigs, James B.; Hoffmann, Udo; Massaro, Joseph M.; Fox, Caroline S.; Magnani, Jared W.

2014-01-01

Background Obesity is associated with altered atrial electrophysiology and a prominent risk factor for atrial fibrillation. Body mass index, the most widely used adiposity measure, has been related to atrial electrical remodeling. We tested the hypothesis that pericardial fat is independently associated with electrocardiographic measures of atrial conduction. Methods and Results We performed a cross‐sectional analysis of 1946 Framingham Heart Study participants (45% women) to determine the relation between pericardial fat and atrial conduction as measured by P wave indices (PWI): PR interval, P wave duration (P‐duration), P wave amplitude (P‐amplitude), P wave area (P‐area), and P wave terminal force (P‐terminal). We performed sex‐stratified linear regression analyses adjusted for relevant clinical variables and ectopic fat depots. Each 1‐SD increase in pericardial fat was significantly associated with PR interval (β=1.7 ms, P=0.049), P‐duration (β=2.3 ms, P<0.001), and P‐terminal (β=297 μV·ms, P<0.001) among women; and P‐duration (β=1.2 ms, P=0.002), P‐amplitude (β=−2.5 μV, P<0. 001), and P‐terminal (β=160 μV·ms, P=0.002) among men. Among both sexes, pericardial fat was significantly associated with P‐duration in analyses additionally adjusting for visceral fat or intrathoracic fat; a similar but non‐significant trend existed with P‐terminal. Among women, pericardial fat was significantly associated with P wave area after adjustment for visceral and intrathoracic fat. Conclusions Pericardial fat is associated with atrial conduction as quantified by PWI, even with adjustment for extracardiac fat depots. Further studies are warranted to identify the mechanisms through which pericardial fat may modify atrial electrophysiology and promote subsequent risk for arrhythmogenesis. PMID:24595189

Development of lightweight aluminum compression panels reinforced by boron-epoxy infiltrated extrusions

NASA Technical Reports Server (NTRS)

Roy, P. A.; Mcelman, J. A.; Henshaw, J.

1973-01-01

Analytical and experimental studies were performed to evaluate the structural efficiencies afforded by the selective reinforcement of conventional aluminum compression panels with unidirectional boron epoxy composite materials. A unique approach for selective reinforcement was utilized called boron/epoxy infiltration. This technique uses extruded metal sections with preformed hollow voids into which unidirectional boron filaments are drawn and subsequently infiltrated with resin to form an integral part. Simplified analytical models were developed to investigate the behavior of stiffener webs with reinforced flanges. Theoretical results are presented demonstrating the effects of transverse shear, of the reinforcement, flange eccentricity and torsional stiffness in such construction. A series of 55 tests were conducted on boron-infiltrated rods and extruded structural sections.

Assessment of crack growth in a space shuttle main engine first-stage, high-pressure fuel turbopump blade

NASA Technical Reports Server (NTRS)

Abdul-Aziz, Ali

1993-01-01

A two-dimensional finite element fracture mechanics analysis of a space shuttle main engine (SSME) turbine blade firtree was performed using the MARC finite element code. The analysis was conducted under combined effects of thermal and mechanical loads at steady-state conditions. Data from a typical engine stand cycle of the SSME were used to run a heat transfer analysis and, subsequently, a thermal structural fracture mechanics analysis. Temperature and stress contours for the firtree under these operating conditions were generated. High stresses were found at the firtree lobes where crack initiation was triggered. A life assessment of the firtree was done by assuming an initial and a final crack size.

Diamond based adsorbents and their application in chromatography.

PubMed

Peristyy, Anton A; Fedyanina, Olga N; Paull, Brett; Nesterenko, Pavel N

2014-08-29

The idea of using diamond and diamond containing materials in separation sciences has attracted a strong interest in the past decade. The combination of a unique range of properties, such as chemical inertness, mechanical, thermal and hydrolytic stability, excellent thermal conductivity with minimal thermal expansion and intriguing adsorption properties makes diamond a promising material for use in various modes of chromatography. This review summarises the recent research on the preparation of diamond and diamond based stationary phases, their properties and chromatographic performance. Special attention is devoted to the dominant retention mechanisms evident for particular diamond containing phases, and their subsequent applicability to various modes of chromatography, including chromatography carried out under conditions of high temperature and pressure. Copyright © 2014 Elsevier B.V. All rights reserved.

Effect of a high helium content on the flow and fracture properties of a 9Cr martensitic steel

NASA Astrophysics Data System (ADS)

Henry, J.; Vincent, L.; Averty, X.; Marini, B.; Jung, P.

2007-08-01

An experimental characterization was conducted of helium effects on the mechanical properties of a 9Cr martensitic steel. Six sub-size Charpy samples were implanted in the notch region at 250 °C with 0.25 at.% helium and subsequently tested in 3-point bending at room temperature. Brittle fracture mode (cleavage and intergranular fracture) was systematically observed in the implanted zones of the samples. Finite element calculations of the tests, using as input the tensile properties measured on a helium loaded sample, were performed in order to determine the fracture stress at the onset of brittle crack propagation. Preliminary TEM investigations of the implantation-induced microstructure revealed a high density of small helium bubbles.

Teaching and Learning Resilience: Building Adaptive Capacity for Rural Practice. A Report and Subsequent Analysis of a Workshop Conducted at the Rural Medical Educators Conference, Savannah, Georgia, May 18, 2010

ERIC Educational Resources Information Center

Longenecker, Randall; Zink, Therese; Florence, Joseph

2012-01-01

Purpose: Resilience, the capacity to endure and overcome hardship, has been suggested as a basic competency for rural medical practice. Unfortunately for physician educators, the medical education literature offers only limited guidance for nurturing this adaptive capacity. We describe the process and subsequent analysis of a daylong curriculum…

Department of Defense Annual Statement of Assurance, Volume II for Fiscal Year 1996.

DTIC Science & Technology

1996-12-01

FY 1996. US Army Audit Agency (USAAA) conducted a multilocation audit of contract security requirements at the request of the US Army Contracting...corrective action(s) are certified by the responsible components upon completion and reviewed through on-site verification, subsequent audit . inspection...requirement for processing Navy pricing inquiries received by DLA inventory control points. 9/97 Verification: Subsequent on-site verification. audit

Multichannel Porous TiO2 Hollow Nanofibers with Rich Oxygen Vacancies and High Grain Boundary Density Enabling Superior Sodium Storage Performance.

PubMed

Wu, Ying; Jiang, Yu; Shi, Jinan; Gu, Lin; Yu, Yan

2017-06-01

TiO 2 as an anode for sodium-ion batteries (NIBs) has attracted much recent attention, but poor cyclability and rate performance remain problematic owing to the intrinsic electronic conductivity and the sluggish diffusivity of Na ions in the TiO 2 matrix. Herein, a simple process is demonstrated to improve the sodium storage performance of TiO 2 by fabricating a 1D, multichannel, porous binary-phase anatase-TiO 2 -rutile-TiO 2 composite with oxygen-deficient and high grain-boundary density (denoted as a-TiO 2- x /r-TiO 2- x ) via electrospinning and subsequent vacuum treatment. The introduction of oxygen vacancies in the TiO 2 matrix enables enhanced intrinsic electronic conductivity and fast sodium-ion diffusion kinetics. The porous structure offers easy access of the liquid electrolyte and a short transport path of Na + through the pores toward the TiO 2 nanoparticle. Furthermore, the high density of grain boundaries between the anatase TiO 2 and rutile TiO 2 offer more interfaces for a novel interfacial storage. The a-TiO 2- x /r-TiO 2- x shows excellent long cycling stability (134 mAh g -1 at 10 C after 4500 cycles) and superior rate performance (93 mAh g -1 after 4500 cycles at 20 C) for sodium-ion batteries. This simple and effective process could serve as a model for the modification of other materials applied in energy storage systems and other fields. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mouth examination performance by children's parents and by adolescents in Fanconi anemia.

PubMed

Pivovar, Allana; Furquim, Camila Pinheiro; Bonfim, Carmem; Torres-Pereira, Cassius Carvalho

2017-11-01

Fanconi anemia (FA) is a rare genetic syndrome characterized by increased risk of developing malignant neoplasms, particularly oral squamous cell carcinoma. This study aims to ascertain the extent to which adolescents and guardians/parents of children with FA are aware of their oral cancer risks and assess their ability to perform mouth examination (ME). A cross-sectional study was conducted among patients with FA (between 6 and 16 years) and their parents. A total of 45 patients, 19 children and 26 adolescents, participated in the study. Among children less than 12 years of age, caregivers performed ME and adolescents between 12 and 16 years of age performed mouth self-examination (MSE). All parents were given a self-reporting questionnaire to collect sociodemographic data, information about health-related behaviors, and oral cancer awareness. Performance was evaluated using criteria for mucosal visualization and retracting ability. Subsequently, a dentist clinically examined all patient participants. Performance evaluation indicated that the examination quality was unsatisfactory in both groups. Statistical significance was found between ability to perform ME by marital status (P < 0.036), where divorced parents had more difficulty performing ME than nondivorced parents. Oral mucosa surveillance performed by parents and adolescents seems to be inaccurate. However, as an oral examination is a relatively inexpensive form of secondary prevention, it merits attention to teaching the technique to patients with FA and their caregivers. © 2017 Wiley Periodicals, Inc.

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What additional BOP... water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP...

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What additional BOP... water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP...

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What... installation. You must use water to conduct this test. You may use drilling fluids to conduct subsequent tests...

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Blowout Preventer (bop) System Requirements § 250.449 What additional BOP... water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP...

Trends in drinking-driving at night : a comparison of the first five roadside surveys of the Fairfax Alcohol Safety Action Project : final report.

DOT National Transportation Integrated Search

1976-01-01

This report outlines the findings of the first five annual roadside surveys conducted in conjunction with the Fairfax Alcohol Safety Action Project (ASAP). The baseline survey was conducted in January of 1972 with the four subsequent surveys being co...

Landscape habitats [Chapter 2

Treesearch

C. L. Simmons

1994-01-01

This landscape habitat description is based on a ground reconnaissance of the Lost Lake, West Glacier Lake, and East Glacier Lake portions of GLEES conducted during 10 days in July-September 1986 and on subsequent photo interpretation of 1:6000 scale color-infrared photographs. A ground check was conducted in July-August 1987. The classification used is a physiognomic...

Preparations of an inorganic-framework proton exchange nanochannel membrane

NASA Astrophysics Data System (ADS)

Yan, X. H.; Jiang, H. R.; Zhao, G.; Zeng, L.; Zhao, T. S.

2016-09-01

In this work, a proton exchange membrane composed of straight and aligned proton conducting nanochannels is developed. Preparation of the membrane involves the surface sol-gel method assisted with a through-hole anodic aluminum oxide (AAO) template to form the framework of the PEM nanochannels. A monomolecular layer (SO3Hsbnd (CH2)3sbnd Sisbnd (OCH3)3) is subsequently added onto the inner surfaces of the nanochannels to shape a proton-conducting pathway. Straight nanochannels exhibit long range order morphology, contributing to a substantial improvement in the proton mobility and subsequently proton conductivity. In addition, the nanochannel size can be altered by changing the surface sol-gel condition, allowing control of the active species/charge carrier selectivity via pore size exclusion. The proton conductivity of the nanochannel membrane is reported as high as 11.3 mS cm-1 at 70 °C with a low activation energy of 0.21 eV (20.4 kJ mol-1). First-principle calculations reveal that the activation energy for proton transfer is impressively low (0.06 eV and 0.07 eV) with the assistance of water molecules.

Heart of the Hearth: Making the Popular Clean, Not the Clean Popular - Technology Research, Development, and Tools for Clean Biomass Cookstoves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gist, Ryan

This technical report summarizes the work completed by BioLite in fulfilment of the US DOE EERE award. The work plan focused on three key objectives: developing an optimized combustion system that demonstrates high combustion efficiency and low PM 2.5 and CO emissions, integrate the system into popular stove phenotypes – side-fed rocket stove architecture like the BioLite HomeStove, and the Patsari chimney stove in Mexico such that they maintain their important phenotypical characteristics, independently evaluate quantitative fuel and emissions performance of the integrated ‘Turbo-Patsari’ in Mexican households. The project activities were organized into six major tasks: A. Develop, fabricate, andmore » test proof-of-concept prototypes B. Develop field prototypes, assess user feedback and field performance C. Define revised stove design for pre-production model, Identify manufacturing requirements and estimated cost to build, Conduct reliability, emissions, and performance testing of pre-production Turbo-Patsari D. Build pre-production Turbo-Patsari stove combustion cores E. Conduct pre-production field trials F. Summarize field trial results and evaluate Turbo-Patsari for potential volume production. A two-pronged approach was adopted for the above tasks. The first involved building a modular test platform that allowed parametric variation of multiple stove design parameters that directly affect its performance – heat output, thermal efficiency, and emissions. The second part of the approach comprised of building a surrogate Patsari based on GIRA’s specifications that could then be modified or retrofitted for optimum performance based on the learnings from the modular test platform. The following sections of the report will describe the findings of tests on these platform, the subsequent development, design, and installation of the Turbo-Patsari, and finally the in-home field trial.« less

A general strategy toward graphitized carbon coating on iron oxides as advanced anodes for lithium-ion batteries.

PubMed

Ding, Chunyan; Zhou, Weiwei; Wang, Bin; Li, Xin; Wang, Dong; Zhang, Yong; Wen, Guangwu

2017-08-25

Integration of carbon materials with benign iron oxides is blazing a trail in constructing high-performance anodes for lithium-ion batteries (LIBs). In this paper, a unique general, simple, and controllable strategy is developed toward in situ uniform coating of iron oxide nanostructures with graphitized carbon (GrC) layers. The basic synthetic procedure only involves a simple dip-coating process for the loading of Ni-containing seeds and a subsequent Ni-catalyzed chemical vapor deposition (CVD) process for the growth of GrC layers. More importantly, the CVD treatment is conducted at a quite low temperature (450 °C) and with extremely facile liquid carbon sources consisting of ethylene glycol (EG) and ethanol (EA). The GrC content of the resulting hybrids can be controllably regulated by altering the amount of carbon sources. The electrochemical results reveal remarkable performance enhancements of iron oxide@GrC hybrids compared with pristine iron oxides in terms of high specific capacity, excellent rate and cycling performance. This can be attributed to the network-like GrC coating, which can improve not only the electronic conductivity but also the structural integrity of iron oxides. Moreover, the lithium storage performance of samples with different GrC contents is measured, manifesting that optimized electrochemical property can be achieved with appropriate carbon content. Additionally, the superiority of GrC coating is demonstrated by the advanced performance of iron oxide@GrC compared with its corresponding counterpart, i.e., iron oxides with amorphous carbon (AmC) coating. All these results indicate the as-proposed protocol of GrC coating may pave the way for iron oxides to be promising anodes for LIBs.

Late-Life Depressive Symptoms and Lifetime History of Major Depression: Cognitive Deficits are Largely Due to Incipient Dementia rather than Depression.

PubMed

Heser, Kathrin; Bleckwenn, Markus; Wiese, Birgitt; Mamone, Silke; Riedel-Heller, Steffi G; Stein, Janine; Lühmann, Dagmar; Posselt, Tina; Fuchs, Angela; Pentzek, Michael; Weyerer, Siegfried; Werle, Jochen; Weeg, Dagmar; Bickel, Horst; Brettschneider, Christian; König, Hans-Helmut; Maier, Wolfgang; Scherer, Martin; Wagner, Michael

2016-08-01

Late-life depression is frequently accompanied by cognitive impairments. Whether these impairments indicate a prodromal state of dementia, or are a symptomatic expression of depression per se is not well-studied. In a cohort of very old initially non-demented primary care patients (n = 2,709, mean age = 81.1 y), cognitive performance was compared between groups of participants with or without elevated depressive symptoms and with or without subsequent dementia using ANCOVA (adjusted for age, sex, and education). Logistic regression analyses were computed to predict subsequent dementia over up to six years of follow-up. The same analytical approach was performed for lifetime major depression. Participants with elevated depressive symptoms without subsequent dementia showed only small to medium cognitive deficits. In contrast, participants with depressive symptoms with subsequent dementia showed medium to very large cognitive deficits. In adjusted logistic regression models, learning and memory deficits predicted the risk for subsequent dementia in participants with depressive symptoms. Participants with a lifetime history of major depression without subsequent dementia showed no cognitive deficits. However, in adjusted logistic regression models, learning and orientation deficits predicted the risk for subsequent dementia also in participants with lifetime major depression. Marked cognitive impairments in old age depression should not be dismissed as "depressive pseudodementia", but require clinical attention as a possible sign of incipient dementia. Non-depressed elderly with a lifetime history of major depression, who remained free of dementia during follow-up, had largely normal cognitive performance.

Tracing the trajectory of skill learning with a very large sample of online game players.

PubMed

Stafford, Tom; Dewar, Michael

2014-02-01

In the present study, we analyzed data from a very large sample (N = 854,064) of players of an online game involving rapid perception, decision making, and motor responding. Use of game data allowed us to connect, for the first time, rich details of training history with measures of performance from participants engaged for a sustained amount of time in effortful practice. We showed that lawful relations exist between practice amount and subsequent performance, and between practice spacing and subsequent performance. Our methodology allowed an in situ confirmation of results long established in the experimental literature on skill acquisition. Additionally, we showed that greater initial variation in performance is linked to higher subsequent performance, a result we link to the exploration/exploitation trade-off from the computational framework of reinforcement learning. We discuss the benefits and opportunities of behavioral data sets with very large sample sizes and suggest that this approach could be particularly fecund for studies of skill acquisition.

Ratio of urine and blood urea nitrogen concentration predicts the response of tolvaptan in congestive heart failure.

PubMed

Shimizu, Keisuke; Doi, Kent; Imamura, Teruhiko; Noiri, Eisei; Yahagi, Naoki; Nangaku, Masaomi; Kinugawa, Koichiro

2015-06-01

This study was conducted to evaluate the performance of the ratio of urine and blood urea nitrogen concentration (UUN/BUN) as a new predictive factor for the response of an arginine vasopressin receptor 2 antagonist tolvaptan (TLV) in decompensated heart failure patients. This study enrolled 70 decompensated heart failure patients who were administered TLV at University of Tokyo Hospital. We collected the data of clinical parameters including UUN/BUN before administering TLV. Two different outcomes were defined as follows: having over 300 mL increase in urine volume on the first day (immediate urine output response) and having any decrease in body weight within one week after starting TLV treatment (subsequent clinical response). Among the 70 enrolled patients, 37 patients (52.9%) showed immediate urine output response; 51 patients (72.9%) showed a subsequent clinical response of body weight decrease. Receiver operating characteristics (ROC) analysis showed good prediction by UUN/BUN for the immediate response (AUC-ROC 0.86 [0.75-0.93]) and a significantly better prediction by UUN/BUN for the subsequent clinical response compared with urinary osmolality (AUC-ROC 0.78 [0.63-0.88] vs. 0.68 [0.52-0.80], P < 0.05). We demonstrated that a clinical parameter of UUN/BUN can predict the response of TLV even when measured before TLV administration. UUN/BUN might enable identification of good responders for this new drug. © 2015 Asian Pacific Society of Nephrology.

Ceria nanoparticles uniformly decorated on graphene nanosheets with coral-like morphology for high-performance supercapacitors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, Yan; Ruiyi, Li; Haiyan, Zhu

Graphical abstract: The study reported the synthesis of coral-like CeO{sub 2}/GNs for supercapacitors. The unique architecture with overall connected framework and good conducting network of the graphene greatly boosts the Faradaic redox reaction. Therefore, the CeO{sub 2}/GNs delivers an excellent electrochemical performance. - Highlights: • The study reported the synthesis of CeO{sub 2}/GNs. • The graphene was woven into CeO{sub 2}, acting as a good conducting network. • The CeO{sub 2}/GNs shows a coral-like structure. • The architecture creates an overall connected framework. • The CeO{sub 2}/GNs delivers good capacitive performances. - Abstract: CeO{sub 2}/graphene was synthesized by a simplemore » microwave method along with subsequent calcination. CeO{sub 2} nanoparticles with an average size of 68.8 nm are uniformly decorated on graphene nanosheets (CeO{sub 2}/GNs). The CeO{sub 2}/GNs displays a like-coral morphology. The architecture including overall connected framework, abundant intercrossed and interconnected nanochannels and perfect conducting network of the graphene, endows the CeO{sub 2}/GNs material with a superior electron and mass transport. As a result, the CeO{sub 2}/GNs gives a high specific capacitance of 503.4 F/g at 2 A/g and good cycle performance with 91.8% capacitance retention after 3000 cycles. Further, an asymmetric supercapacitors was assembled by using CeO{sub 2}/GNs as the positive electrode and activated carbon as the negative electrode, the asymmetric device demonstrate a favorable energy density of 30.2 Wh/kg at the power density of 750.0 W/kg and superior cycle life with 86.4% the capacitance retenion at 5 A/g after 3000 cycles.« less

Trait procrastination among dental students in India and its influence on academic performance.

PubMed

Madhan, Balasubramanian; Kumar, Cholleti Sudheer; Naik, Eslavath Seena; Panda, Sujit; Gayathri, Haritheertham; Barik, Ashish Kumar

2012-10-01

Trait procrastination is believed to be highly prevalent among college students and detrimental to their educational performance. As the scenario among dental students is virtually unknown, this study was conducted to evaluate the prevalence of trait procrastination among dental students and to analyze its influence on their academic performance. A total of 174 fourth-year dental students from three dental colleges in India voluntarily completed the Lay's Procrastination Scale-student version (LPS). The mean percentage marks scored in the subsequent final university examinations were used as a measure of academic performance. The descriptive statistics were computed to evaluate the prevalence of significant procrastination (LPS score ≥60). Mann-Whitney U test and multiple linear regressions were used to assess the influence of age and gender on procrastination severity, and the latter was again used to analyze the association between procrastination severity and academic performance. The results indicated that 27 percent (n=47) of the students exhibited a significant extent of trait procrastination; neither age nor gender affected its severity (p<0.05). Procrastination had a significant and negative impact on the academic performance of the student (beta=-0.150, p=0.039). These findings highlight the need for active measures to reduce the causes and consequences of procrastination in dental education.

Relationships among performance, residual feed intake, and temperament assessed in growing beef heifers and subsequently as 3-year-old, lactating beef cows

USDA-ARS?s Scientific Manuscript database

Seventy-four beef heifers were used to evaluate the relationships among performance, residual feed intake (RFI), and temperament measured as growing heifers (Phase 1) and subsequently as 3-year-old lactating beef cows (Phase 2) in the same cohort. In both phases, females were housed in a covered fac...

Implications of soil mixing for NAPL source zone remediation: Column studies and modeling of field-scale systems

NASA Astrophysics Data System (ADS)

Olson, Mitchell R.; Sale, Tom C.

2015-06-01

Soil remediation is often inhibited by subsurface heterogeneity, which constrains contaminant/reagent contact. Use of soil mixing techniques for reagent delivery provides a means to overcome contaminant/reagent contact limitations. Furthermore, soil mixing reduces the permeability of treated soils, thus extending the time for reactions to proceed. This paper describes research conducted to evaluate implications of soil mixing on remediation of non-aqueous phase liquid (NAPL) source zones. The research consisted of column studies and subsequent modeling of field-scale systems. For column studies, clean influent water was flushed through columns containing homogenized soils, granular zero valent iron (ZVI), and trichloroethene (TCE) NAPL. Within the columns, NAPL depletion occurred due to dissolution, followed by either column-effluent discharge or ZVI-mediated degradation. Complete removal of TCE NAPL from the columns occurred in 6-8 pore volumes of flow. However, most of the TCE (> 96%) was discharged in the column effluent; less than 4% of TCE was degraded. The low fraction of TCE degraded is attributed to the short hydraulic residence time (< 4 days) in the columns. Subsequently, modeling was conducted to scale up column results. By scaling up to field-relevant system sizes (> 10 m) and reducing permeability by one-or-more orders of magnitude, the residence time could be greatly extended, potentially for periods of years to decades. Model output indicates that the fraction of TCE degraded can be increased to > 99.9%, given typical post-mixing soil permeability values. These results suggest that remediation performance can be greatly enhanced by combining contaminant degradation with an extended residence time.

A scale‐down mimic for mapping the process performance of centrifugation, depth and sterile filtration

PubMed Central

Joseph, Adrian; Kenty, Brian; Mollet, Michael; Hwang, Kenneth; Rose, Steven; Goldrick, Stephen; Bender, Jean; Farid, Suzanne S.

2016-01-01

ABSTRACT In the production of biopharmaceuticals disk‐stack centrifugation is widely used as a harvest step for the removal of cells and cellular debris. Depth filters followed by sterile filters are often then employed to remove residual solids remaining in the centrate. Process development of centrifugation is usually conducted at pilot‐scale so as to mimic the commercial scale equipment but this method requires large quantities of cell culture and significant levels of effort for successful characterization. A scale‐down approach based upon the use of a shear device and a bench‐top centrifuge has been extended in this work towards a preparative methodology that successfully predicts the performance of the continuous centrifuge and polishing filters. The use of this methodology allows the effects of cell culture conditions and large‐scale centrifugal process parameters on subsequent filtration performance to be assessed at an early stage of process development where material availability is limited. Biotechnol. Bioeng. 2016;113: 1934–1941. © 2016 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc. PMID:26927621

Puffed and bothered: Personality, performance, and the effects of stress on checkered pufferfish.

PubMed

Pleizier, Naomi; Wilson, Alexander D M; Shultz, Aaron D; Cooke, Steven J

2015-12-01

Although consistent individual-level differences in behaviour are widespread and potentially important in evolutionary and ecological processes, relatively few studies focus on the physiological mechanisms that might underlie and regulate these individual-level differences in wild populations. We conducted experiments to determine whether checkered pufferfish (Sphoeroides testudineus), which were collected from a dynamic (in terms of depth and water temperature) tidal mangrove creek environment in The Bahamas, have consistent individual-level differences in locomotor activity and the response to a simulated predator threat, as well as swimming performance and puffing in response to stressors. The relationships between personality and performance traits were evaluated to determine whether they represented stress-coping styles or syndromes. Subsequently, a displacement study was conducted to determine how personality and performance in the laboratory compared to movements in the field. In addition, we tested whether a physiological dose of the stress hormone cortisol would alter individual consistency in behavioural and performance traits. We found that pufferfish exhibited consistent individual differences in personality traits over time (e.g., activity and the duration of a response to a threat) and that performance was consistent between the lab and the natural enclosure. Locomotor activity and the duration of startled behaviour were not associated with swimming and puffing performance. Locomotor activity, puffing performance, and swimming performance were not related to whether fish returned to the tidal creek of capture after displacement. Similarly, a cortisol treatment did not modify behaviour or performance in the laboratory. The results reveal that consistent individual-level differences in behaviour and performance were present in a population from a fluctuating and physiologically challenging environment but that such traits are not necessarily correlated. We also determined that certain individual performance traits were repeatable between the lab and a natural enclosure. However, we found no evidence of a relationship between exogenous cortisol levels and behavioural traits or performance in these fish, which suggests that other internal and external mechanisms may underlie the behaviours and performance tested. Copyright © 2015 Elsevier Inc. All rights reserved.

The Lipid-Rich Plaque Study of vulnerable plaques and vulnerable patients: Study design and rationale.

PubMed

Waksman, Ron; Torguson, Rebecca; Spad, Mia-Ashley; Garcia-Garcia, Hector; Ware, James; Wang, Rui; Madden, Sean; Shah, Priti; Muller, James

2017-10-01

It has been hypothesized that the outcome post-PCI could be improved by the detection and subsequent treatment of vulnerable patients and lipid-rich vulnerable coronary plaques (LRP). A near-infrared spectroscopy (NIRS) catheter capable of detecting LRP is being evaluated in The Lipid-Rich Plaque Study. The LRP Study is an international, multicenter, prospective cohort study conducted in patients with suspected coronary artery disease (CAD) who underwent cardiac catheterization with possible ad hoc PCI for an index event. Patient level and plaque level events were detected by follow-up in the subsequent 2 years. Enrollment began in February 2014 and was completed in March 2016; a total of 1,562 patients were enrolled. Adjudication of new coronary event occurrence and de novo culprit lesion location during the 2-year follow-up is performed by an independent clinical end-points committee (CEC) blinded to NIRS-IVUS findings. The first analysis of the results will be performed when at least 20 de novo events have occurred for which follow-up angiographic data and baseline NIRS-IVUS measurements are available. It is expected that results of the study will be announced in 2018. The LRP Study will test the hypotheses that NIRS-IVUS imaging to detect LRP in patients can identify vulnerable patients and vulnerable plaques. Identification of vulnerable patients will assist future studies of novel systemic therapies; identification of localized vulnerable plaques would enhance future studies of possible preventive measures. Copyright © 2017 Elsevier Inc. All rights reserved.

Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)

DOE PAGES

Galarraga, Haize; Warren, Robert J.; Lados, Diana A.; ...

2017-01-06

Electron beam melting (EBM) is a metal powder bed fusion additive manufacturing (AM) technology that is used to fabricate three-dimensional near-net-shaped parts directly from computer models. Ti-6Al-4V is the most widely used and studied alloy for this technology and is the focus of this work in its ELI (Extra Low Interstitial) variation. The mechanisms of microstructure formation, evolution, and its subsequent influence on mechanical properties of the alloy in as-fabricated condition have been documented by various researchers. In the present work, the thermal history resulting in the formation of the as-fabricated microstructure was analyzed and studied by a thermal simulation.more » Subsequently different heat treatments were performed based on three approaches in order to study the effects of heat treatments on the singular and exclusive microstructure formed during the EBM fabrication process. In the first approach, the effect of cooling rate after the solutionizing process was studied. In the second approach, the variation of α lath thickness during annealing treatment and correlation with mechanical properties was established. In the last approach, several solutionizing and aging experiments were conducted.« less

Safety behaviors and judgmental biases in social anxiety disorder.

PubMed

Taylor, Charles T; Alden, Lynn E

2010-03-01

Two experiments were conducted to examine the link between safety behaviors and social judgments in social anxiety disorder (SAD). Safety behaviors were manipulated in the context of a controlled laboratory-based social interaction, and subsequent effects of the manipulation on the social judgments of socially anxious participants (N = 50, Study 1) and individuals meeting diagnostic criteria for generalized SAD (N = 80, Study 2) were examined. Participants were randomly assigned to either a safety behavior reduction plus exposure condition (SB + EXP) or a graduated exposure (EXP) control condition, and then took part in a conversation with a trained experimental confederate. Results revealed across both studies that participants in the SB + EXP group were less negative and more accurate in judgments of their performance following safety behavior reduction relative to EXP participants. Study 2 also demonstrated that participants in the SB + EXP group displayed lower judgments about the likelihood of negative outcomes in a subsequent social event compared to controls. Moreover, reduction in safety behaviors mediated change in participant self-judgments and future social predictions. The current findings are consistent with cognitive theories of anxiety, and support the causal role of safety behaviors in the persistence of negative social judgments in SAD. 2009 Elsevier Ltd. All rights reserved.

Superstructure ZrV2O7 nanofibres: thermal expansion, electronic and lithium storage properties.

PubMed

Li, Qidong; Zhao, Yanming; Kuang, Quan; Fan, Qinghua; Dong, Youzhong; Liu, Xudong

2016-11-30

ZrV 2 O 7 has attracted much attention as a negative thermal expansion (NTE) material due to its isotropic negative structure. However, rarely has investigation of the lithium storage behaviors been carried out except our first report on it. Meanwhile, the electrochemical behaviors and energy storage characteristics have not been studied in depth and will be explored in this article. Herein, we report on the synthesis, characterization and lithium intercalation mechanism of superstructure ZrV 2 O 7 nanofibres that were prepared through a facile solution-based method with a subsequent annealing process. The thermal in situ XRD technique combined with the Rietveld refinement method is adopted to analyze the change in the temperature-dependent crystal structure. Benefiting from the nanostructured morphology and relatively high electronic conductivity, it presents acceptable cyclic stability and rate capability. According to the operando evolution of the XRD patterns obtained from electrochemical in situ measurements, the Li intercalation mechanism of the solid solution process with a subsequent conversion reaction can be concluded. Finally, the amorphous state of the electrodes after the initial fully discharged state can effectively enhance the electrochemical performances.

OnabotulinumtoxinA in overactive bladder: Evidence-based consensus recommendations.

PubMed

Jiménez-Cidre, M A; Arlandis-Guzmán, S

2016-04-01

To offer a set of useful recommendations for urologists who are starting to provide treatment of overactive bladders with onabotulinumtoxinA. A literature search to December 2013 was conducted, as well as a subsequent critical reading of the selected publications. The coordinators prepared a document that was submitted for review by the members of the Spanish Group for the use of Botulinum Toxin in Urology. The expert group considered that onabotulinumtoxinA may be used for overactive bladder syndrome with urinary urge incontinence secondary to neurogenic or idiopathic detrusor overactivity for patients for whom conservative treatment and first-line medical treatment has failed, is not tolerated or is contraindicated. Treatment in most cases was performed with local intravesical anesthesia, although it can also be performed under epidural or general anesthesia. Patients must be informed of the possibility of requiring self-catheterization or temporary catheterization. Clinicians should ensure that the patients are capable of performing this catheterization before the treatment is conducted. Patients must also be informed of the need for antibiotic prophylaxis to reduce the risk of urinary tract infections. At least 2 follow-up visits are recommended: the first at days 7-14 after the injection and the second at 2-3 months. Reinjection is indicated when the effect of the treatment decreases. These guidelines can help clinicians in their daily decisions and limit the potential risks associated with the incorrect use of the drug. Copyright © 2015 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rager, Matthew S.; Aytug, Tolga; Veith, Gabriel M.

The developing field of printed electronics nanoparticle based inks such as CuO show great promise as a low-cost alternative to other metal-based counterparts (e.g., silver). In particular, CuO inks significantly eliminate the issue of particle oxidation, before and during the sintering process, that is prevalent in Cu-based formulations. We report here the scalable and low-thermal budget photonic fabrication of Cu interconnects employing a roll-to-roll compatible pulse-thermal-processing (PTP) technique that enables phase reduction and subsequent sintering of inkjet-printed CuO patterns onto flexible polymer templates. Detailed investigations of curing and sintering conditions were performed to understand the impact of PTP system conditionsmore » on the electrical performance of the Cu patterns. Specifically, the impact of energy and power of photonic pulses on print conductivity was systematically studied by varying the following key processing parameters: pulse intensity, duration and sequence. Through optimization of such parameters, highly conductive prints in < 1 s with resistivity values as low as 100 n m has been achieved. We also observed that the introduction of an initial ink-drying step in ambient atmosphere, after the printing and before sintering, leads to significant improvements in mechanical integrity and electrical performance of the printed Cu patterns. Moreover, the viability of CuO reactive inks, coupled with the PTP technology and pre ink-drying protocols, has also been demonstrated for the additive integration of a low-cost Cu temperature sensor onto a flexible polymer substrate.« less

Comparison of DOE and Army Advisory Boards: Application of a Conceptual Framework for Evaluating Public Participation in Environmental Risk Decision Making

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branch, Kristi M.; Bradbury, Judith A.

This article is part of a growing body of literature evaluating public participation approaches and implementation efforts. It compares the characteristics and performance of citizen advisory boards established by the U.S. Department of Energy's Environmental Restoration and Waste Management Program (DOE/EM) and by the U.S. Department of Defense's Army (DoD/Army) as a major part of the public participation programs that were undertaken to help the agencies plan and implement the cleanup of their contaminated installations. We first present the elements of the Acceptability Diamond, an evaluative framework developed by the authors through extensive fieldwork on public-federal agency interactions that identifymore » five objectives of agency/public interactions and public participation programs, and link them to existing literature. We then use the Acceptability Diamond as a basis for comparing the performance of the DOE/EM and DoD/Army advisory boards. In the early 1990s, both DOE and DoD participated in the Federal Facilities Environmental Restoration Dialogue Committee (known as the FFER Dialogue Committee) and were influenced by the Committee's recommendations on public participation. However, the Site Specific Advisory Boards (SSABs) subsequently established by DOE/EM and the Restoration Advisory Boards (RABs) subsequently established by DoD and the Army were governed by significantly different policies and management. We describe some of these key differences and compare the performance of the SSABs and RABs. The article draws on a series of research studies conducted by the authors on the DOE/EM public participation program from its inception in the early 1990s through its transition to accelerated cleanup in 2002 and also on a recently completed study of seven Army RABs.« less

To observe or not to observe peers when learning physical examination skills; that is the question

PubMed Central

2013-01-01

Background Learning physical examination skills is an essential element of medical education. Teaching strategies include practicing the skills either alone or in-group. It is unclear whether students benefit more from training these skills individually or in a group, as the latter allows them to observing their peers. The present study, conducted in a naturalistic setting, investigated the effects of peer observation on mastering psychomotor skills necessary for physical examination. Methods The study included 185 2nd-year medical students, participating in a regular head-to-toe physical examination learning activity. Students were assigned either to a single-student condition (n = 65), in which participants practiced alone with a patient instructor, or to a multiple-student condition (n = 120), in which participants practiced in triads under patient instructor supervision. The students subsequently carried out a complete examination that was videotaped and subsequently evaluated. Student’s performance was used as a measure of learning. Results Students in the multiple-student condition learned more than those who practiced alone (81% vs 76%, p < 0.004). This result possibly derived from a positive effect of observing peers; students who had the possibility to observe a peer (the second and third students in the groups) performed better than students who did not have this possibility (84% vs 76%, p <. 001). There was no advantage of observing more than one peer (83.7% vs 84.1%, p > .05). Conclusions The opportunity to observe a peer during practice seemed to improve the acquisition of physical examination skills. By using small groups instead of individual training to teach physical examination skills, health sciences educational programs may provide students with opportunities to improve their performance by learning from their peers through modelling. PMID:23594455

To observe or not to observe peers when learning physical examination skills; that is the question.

PubMed

Martineau, Bernard; Mamede, Sílvia; St-Onge, Christina; Rikers, Remy M J P; Schmidt, Henk G

2013-04-17

Learning physical examination skills is an essential element of medical education. Teaching strategies include practicing the skills either alone or in-group. It is unclear whether students benefit more from training these skills individually or in a group, as the latter allows them to observing their peers. The present study, conducted in a naturalistic setting, investigated the effects of peer observation on mastering psychomotor skills necessary for physical examination. The study included 185 2nd-year medical students, participating in a regular head-to-toe physical examination learning activity. Students were assigned either to a single-student condition (n = 65), in which participants practiced alone with a patient instructor, or to a multiple-student condition (n = 120), in which participants practiced in triads under patient instructor supervision. The students subsequently carried out a complete examination that was videotaped and subsequently evaluated. Student's performance was used as a measure of learning. Students in the multiple-student condition learned more than those who practiced alone (81% vs 76%, p < 0.004). This result possibly derived from a positive effect of observing peers; students who had the possibility to observe a peer (the second and third students in the groups) performed better than students who did not have this possibility (84% vs 76%, p <. 001). There was no advantage of observing more than one peer (83.7% vs 84.1%, p > .05). The opportunity to observe a peer during practice seemed to improve the acquisition of physical examination skills. By using small groups instead of individual training to teach physical examination skills, health sciences educational programs may provide students with opportunities to improve their performance by learning from their peers through modelling.

A Numerical Study of Factors Affecting Fracture-Fluid Cleanup and Produced Gas/Water in Marcellus Shale: Part II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seales, Maxian B.; Dilmore, Robert; Ertekin, Turgay

Horizontal wells combined with successful multi-stage hydraulic fracture treatments are currently the most established method for effectively stimulating and enabling economic development of gas bearing organic-rich shale formations. Fracture cleanup in the Stimulated Reservoir Volume (SRV) is critical to stimulation effectiveness and long-term well performance. However, fluid cleanup is often hampered by formation damage, and post-fracture well performance frequently falls below expectations. A systematic study of the factors that hinder fracture fluid cleanup in shale formations can help optimize fracture treatments and better quantify long term volumes of produced water and gas. Fracture fluid cleanup is a complex process influencedmore » by multi-phase flow through porous media (relative permeability hysteresis, capillary pressure etc.), reservoir rock and fluid properties, fracture fluid properties, proppant placement, fracture treatment parameters, and subsequent flowback and field operations. Changing SRV and fracture conductivity as production progresses further adds to the complexity of this problem. Numerical simulation is the best, and most practical approach to investigate such a complicated blend of mechanisms, parameters, their interactions, and subsequent impact on fracture fluid cleanup and well deliverability. In this paper, a 3-dimensional, 2-phase, dual-porosity model was used to investigate the impact of multiphase flow, proppant crushing, proppant diagenesis, shut-in time, reservoir rock compaction, gas slippage, and gas desorption on fracture fluid cleanup, and well performance in Marcellus shale. The research findings have shed light on the factors that substantially constrains efficient fracture fluid cleanup in gas shales, and provided guidelines for improved fracture treatment designs and water management.« less

Does Winning a Pay-for-Performance Bonus Improve Subsequent Quality Performance? Evidence from the Hospital Quality Incentive Demonstration

PubMed Central

Ryan, Andrew; Sutton, Matthew; Doran, Tim

2014-01-01

Objective To test whether receiving a financial bonus for quality in the Premier Hospital Quality Incentive Demonstration (HQID) stimulated subsequent quality improvement. Data Hospital-level data on process-of-care quality from Hospital Compare for the treatment of acute myocardial infarction (AMI), heart failure, and pneumonia for 260 hospitals participating in the HQID from 2004 to 2006; receipt of quality bonuses in the first 3 years of HQID from the Premier Inc. website; and hospital characteristics from the 2005 American Hospital Association Annual Survey. Study Design Under the HQID, hospitals received a 1 percent bonus on Medicare payments for scoring between the 80th and 90th percentiles on a composite quality measure, and a 2 percent bonus for scoring at the 90th percentile or above. We used a regression discontinuity design to evaluate whether hospitals with quality scores just above these payment thresholds improved more in the subsequent year than hospitals with quality scores just below the thresholds. In alternative specifications, we examined samples of hospitals scoring within 3, 5, and 10 percentage point “bandwidths” of the thresholds. We used a Generalized Linear Model to estimate whether the relationship between quality and lagged quality was discontinuous at the lagged thresholds required for quality bonuses. Principal Findings There were no statistically significant associations between receipt of a bonus and subsequent quality performance, with the exception of the 2 percent bonus for AMI in 2006 using the 5 percentage point bandwidth (0.8 percentage point increase, p < .01), and the 1 percent bonus for pneumonia in 2005 using all bandwidths (3.7 percentage point increase using the 3 percentage point bandwidth, p < .05). Conclusions We found little evidence that hospitals' receipt of quality bonuses was associated with subsequent improvement in performance. This raises questions about whether winning in pay-for-performance programs, such as Hospital Value-Based Purchasing, will lead to subsequent quality improvement. PMID:23909992

Effect of tensile twins on the subsequent plastic deformation in rolled Mg-3Al-1Zn alloy

NASA Astrophysics Data System (ADS)

Yoon, Jonghun; Kim, Se-Jong; Lee, Youngseon

2013-12-01

The {101¯2} tensile twins influence plastic flow of magnesium alloys for the subsequent plastic deformation since it contributes to grain refinement and texture hardening between the twinned and untwined regions. This paper investigates the variation of plastic flow of the rolled Mg-3Al-1Zn alloy which is compressed with a small plastic strain at the room temperature to induce the twins in the initial specimen. Subsequent tension and compression along the rolling and transverse direction are conducted with the twin induced specimens in order to examine the effect of the initial tensile twins.

The effects of low-speed swimming following exhaustive exercise on metabolic recovery and swimming performance in brook trout (Salvelinus fontinalis).

PubMed

Kieffer, James D; Kassie, Roshini S; Taylor, Susan G

2011-01-01

Experiments were conducted to determine whether low-speed swimming during recovery from exhaustive exercise improved both metabolic recovery and performance during a swimming challenge. For these experiments, brook trout were allowed to recover from exhaustive exercise for 2 h while swimming at 0, 0.5, 1.0, or 1.5 body length (BL) s(-1) or allowed to recover from exhaustive exercise for 1, 2, or 3 h while swimming at 1.0 BL s(-1). At the appropriate interval, either (i) muscle and blood samples were removed from the fish or (ii) fish were assessed for performance (i.e., fatigue time) during a fixed-interval swimming test. Low-speed swimming during recovery from exhaustive exercise resulted in significantly longer fatigue times compared with fish recovering in still water (i.e., 0 BL s(-1)). However, swimming during recovery did not expedite recovery of muscle lactate or blood variables (e.g., lactate, osmolarity, glucose). These observations suggest that metabolic recovery and subsequent swimming performance may not be directly linked and that other factors play a role in swimming recovery in brook trout.

Effects of napping on sleepiness and sleep-related performance deficits in night-shift workers: a systematic review.

PubMed

Ruggiero, Jeanne S; Redeker, Nancy S

2014-04-01

Night-shift workers are prone to sleep deprivation, misalignment of circadian rhythms, and subsequent sleepiness and sleep-related performance deficits. The purpose of this narrative systematic review is to critically review and synthesize the scientific literature regarding improvements in sleepiness and sleep-related performance deficits following planned naps taken during work-shift hours by night workers and to recommend directions for future research and practice. We conducted a literature search using the Medline, PsychInfo, CINAHL, Cochrane Library, and Health and Safety Science Abstracts databases and included English-language quasi-experimental and experimental studies that evaluated the effects of a nighttime nap taken during a simulated or actual night-work shift. We identified 13 relevant studies, which consisted primarily of small samples and mixed designs. Most investigators found that, despite short periods of sleep inertia immediately following naps, night-shift napping led to decreased sleepiness and improved sleep-related performance. None of the studies examined the effects of naps on safety outcomes in the workplace. Larger-scale randomized clinical trials of night-shift napping and direct safety outcomes are needed prior to wider implementation.

[Individual learning curve for radical robot-assisted prostatectomy based on the example of three professionals working in one clinic].

PubMed

Rasner, P I; Pushkar', D Iu; Kolontarev, K B; Kotenkov, D V

2014-01-01

The appearance of new surgical technique always requires evaluation of its effectiveness and ease of acquisition. A comparative study of the results of the first three series of successive robot-assisted radical prostatectomy (RARP) performed on at time by three surgeons, was conducted. The series consisted of 40 procedures, and were divided into 4 groups of 10 operations for the analysis. When comparing data, statistically significant improvement of intra- and postoperative performance in each series was revealed, with increase in the number of operations performed, and in each subsequent series compared with the preceding one. We recommend to perform the planned conversion at the first operation. In our study, previous laparoscopic experience did not provide any significant advantages in the acquisition of robot-assisted technology. To characterize the individual learning curve, we recommend the use of the number of operations that the surgeon looked in the life-surgery regimen and/or in which he participated as an assistant before his own surgical activity, as well as the indicator "technical defect". In addition to the term "individual learning curve", we propose to introduce the terms "surgeon's individual training phase", and "clinic's learning curve".

Ionic Conductivity and its Role in Oxidation Reactions

NASA Astrophysics Data System (ADS)

Tamimi, Mazin Abdulla

In the field of solid oxide fuel cells (SOFCs), a substantial portion of research is focused on the ability of some oxide materials to conduct oxygen anions through their structure. For electrolytes, the benefits of improving bulk transport of ions are obvious: decrease the resistive losses of the electrolyte, and device efficiency goes up and higher power densities are possible. Even for cathode materials, better bulk ion transport leads to an increase in the oxygen exchange rate at the cathode surface, and the oxygen reduction reaction at the cathode surface is the rate limiting step for SOFC operation at intermediate temperatures (500-700ºC). As operation in this regime is a key step towards lowering the manufacturing cost and increasing the lifetime of devices, much effort is spent searching for new, more conductive materials, and analyzing existing materials to discover the structure-activity relationships that influence ionic conductivity. In the first part of this work, an overview is given of the neutron powder diffraction (NPD) techniques that are used to probe the structure of the materials in later parts. In the second part, NPD was used to analyze the structures of perovskite-type cathode materials, and show that increases in bulk conductivity led to increases in the surface oxygen exchange rate of these materials. In the final part, the methods used for SOFC cathode design were applied towards the design of oxide catalysts used for certain hydrocarbon partial oxidation reactions. The reactions studied follow the Mars van Krevelen mechanism, where oxygen atoms in the catalyst are consumed as part of the reaction and are subsequently replenished by oxygen in the gas phase. Similar to SOFC cathode operation, these processes include an oxygen reduction step, so it was hypothesized that increasing the ionic conductivity of the catalysts would improve their performance, just as it does for SOFC cathode materials. While the results are preliminary, the combination of a reference catalyst for the oxidative coupling of methane with a support with very high oxygen conductivity demonstrated a small increase in performance at low temperatures.

Intraoperative culture positive allograft bone and subsequent postoperative infections: a retrospective review.

PubMed

Sims, Laura; Kulyk, Paul; Woo, Allan

2017-04-01

Obtaining intraoperative cultures of allograft bone just before use in orthopedic procedures is standard practice in many centres; however, the association between positive cultures and subsequent surgical infections is unknown. Our study had 3 goals: to determine the prevalence of positive intraoperative allograft culture and subsequent infection; to determine if, in cases of subsequent infection, organisms isolated at reoperation were the same as those cultured from the allograft at the time of the index procedure; and to assess the costs associated with performing intraoperative allograft cultures. In this retrospective case series, we obtained data on patients receiving allograft bone between 2009 and 2012. Patients receiving allograft with positive cultures were reviewed to identify cases of significant infection. Organisms isolated at reoperation were compared with the allograft culture taken at the time of implantation, and we performed a cost assessment. Of the 996 allograft bone grafts used, 43 (4.3%) had positive intraoperative cultures and significant postoperative infections developed in 2, requiring reoperation. Antibiotics based on culture results were prescribed in 24% of cases. Organisms cultured at the time of reoperation differed from those isolated initially. The cost of performing 996 allograft cultures was $169 320. This series suggests that rates of positive intraoperative bone allograft culture are low, and subsequent infection is rare. In cases of postoperative infection, primary allograft culture and secondary tissue cultures isolated different organisms. Costs associated with performing cultures are high. Eliminating initial culture testing could save $42 500 per year in our health region.

A formative research-guided educational intervention to improve the knowledge and attitudes of seniors towards influenza and pneumococcal vaccinations.

PubMed

Ho, Hanley J; Chan, Yin Ying; Ibrahim, Muhamad Alif Bin; Wagle, Anurupa A; Wong, Christina M; Chow, Angela

2017-11-07

Adult influenza and pneumococcal vaccination rates in Singapore are low, and factors influencing knowledge and attitudes of seniors towards influenza, pneumonia and their respective vaccines are not well-known. Our study aims to understand the barriers and facilitators towards getting influenza and pneumococcal vaccinations among seniors in Singapore, and subsequently inform the conduct of a relevant community-based educational intervention, as well as evaluate the intervention outcomes. We performed a mixed methods study with two components: Firstly, formative research was conducted among community-dwelling seniors, using focus group discussions (FGDs), to understand their knowledge and attitudes towards influenza, pneumonia and their respective vaccines. Next, a quantitative study was conducted to evaluate knowledge of seniors and the effectiveness of an educational intervention. Four FGDs were organised with 32 participants, who were predominantly female, of lower educational background, and residing in government rental flats. Participants had varying levels of knowledge and many misconceptions about influenza, pneumonia and their respective vaccinations, with concerns about side effects and vaccine effectiveness. The formative research results were used to inform a community-based educational intervention for seniors. Our subsequent evaluation included 604 elderly participants, mainly from lower educational and socio-economic strata, who initially demonstrated poor knowledge scores (median score 5 out of 9, IQR 4-5). Following our intervention, median knowledge score improved to 7 (IQR 6-8) (p < .0001). Significant improvements in knowledge scores were observed across genders, age strata, education levels, and housing types. Our formative research identified knowledge gaps among community-dwelling seniors which affected their attitudes towards vaccination uptake. Key findings were taken into consideration when implementing the educational intervention. Our community-based intervention was effective in improving knowledge and attitudes, and could be used as a cue to action for short-term behaviour changes. Copyright © 2017 Elsevier Ltd. All rights reserved.

High-performance Bi-stage process in reduction of graphene oxide for transparent conductive electrodes

NASA Astrophysics Data System (ADS)

Alahbakhshi, Masoud; Fallahi, Afsoon; Mohajerani, Ezeddin; Fathollahi, Mohammad-Reza; Taromi, Faramarz Afshar; Shahinpoor, Mohsen

2017-02-01

A novel and innovative approach to develop reduction of graphene oxide (GO) solution for fabrication of highly and truly transparent conductive electrode (TCE) has been presented. Thanks to outstanding mechanical and electronic properties of graphene which offer practical applications in synthesizing composites as well as fabricating various optoelectronic devices, in this study, conductive reduced graphene oxide (r-GO) thin films were prepared through sequential chemical and thermal reduction process of homogeneously dispersed GO solutions. The conductivity and transparency of r-GO thin film is regulated using hydroiodic acid (HI) as reducing agent following by vacuum thermal annealing. The prepared r-GO is characterized by XRD, AFM, UV-vis and Raman spectroscopy. the AFM topographic images reveal surface roughness almost ∼11 nm which became less than 2 nm for the 4 mg/mL solution. Moreover, XRD analysis and Raman spectra substantiate the interlayer spacing between rGO layers has been reduced dramatically and also electronic conjugation has been ameliorated after using HI chemical agent and 700 °C thermal annealing sequentially. Subsequently providing r-GO transparent electrode with decent and satisfactory transparency, acceptable conductivity and suitable work function, it has been exploited as the anode in organic light emitting diode (OLED). The maximum luminance efficiency and maximum power efficiency reached 4.2 cd/A and 0.83 lm/W, respectively. We believe that by optimizing the hole density, sheet resistance, transparency and surface morphology of the r-GO anodes, the device efficiencies can be remarkably increased further.

The Influence of Breast Self-Examination on Subsequent Mammography Participation

PubMed Central

Jelinski, Susan E.; Maxwell, Colleen J.; Onysko, Jay; Bancej, Christina M.

2005-01-01

Objectives. We evaluated whether breast self-examination (BSE) influences subsequent mammography participation. Methods. We evaluated associations between BSE and subsequent mammography participation, adjusting for baseline screening behaviors and sociodemographic, health, and lifestyle characteristics, among women aged 40 years and older using data from the longitudinal Canadian National Population Health Survey. Results. Regular performance of BSE at baseline was not associated with receipt of a recent mammogram at follow-up among all women (adjusted odds ratio [OR]=1.01; 95% confidence interval [CI]= 0.75, 1.35) or with mammography uptake among the subgroup of women reporting never use at baseline (adjusted OR=0.78; 95% CI=0.50, 1.22). Conclusions. The lack of association between performance of BSE and subsequent mammography participation suggests that not recommending BSE is unlikely to influence mammography participation. PMID:15727985

Influences of Tobacco Advertising Exposure and Conduct Problems on Smoking Behaviors Among Adolescent Males and Females

PubMed Central

2014-01-01

Introduction: Adolescents with conduct problems are more likely to smoke, and tobacco advertising exposure may exacerbate this risk. Males’ excess risk for conduct problems and females’ susceptibility to advertising suggest gender-specific pathways to smoking. We investigated the associations between gender, conduct problems, and lifetime smoking and adolescents’ exposure to tobacco advertising, and we examined prospective relationships with smoking behaviors. Methods: Adolescents completed baseline (2001–2004; n = 541) and 5-year follow-up (2007–2009; n =320) interviews for a family study of smoking risk. Baseline interviews assessed conduct problems and tobacco advertising exposure; smoking behavior was assessed at both timepoints. Generalized linear models analyzed gender differences in the relationship between conduct problems, advertising exposure, and smoking behavior at baseline and longitudinally. Results: At baseline, among males, conduct problems were associated with greater advertising exposure independent of demographics and lifetime smoking. Among females at baseline, conduct problems were associated with greater advertising exposure only among never-smokers after adjusting for demographics. In longitudinal analyses, baseline advertising exposure predicted subsequent smoking initiation (i.e., smoking their first cigarette between baseline and follow-up) for females but not for males. Baseline conduct problems predicted current (i.e., daily or weekly) smoking at follow-up for all adolescents in adjusted models. Conclusions: The findings of this study reinforce that conduct problems are a strong predictor of subsequent current smoking for all adolescents and reveal important differences between adolescent males and females in the relationship between conduct problems, tobacco advertising behavior, and smoking behavior. The findings suggest gender-specific preventive interventions targeting advertising exposure may be warranted. PMID:24590388

Effects of Parenting and Deviant Peers on Early to Mid-Adolescent Conduct Problems

ERIC Educational Resources Information Center

Trudeau, Linda; Mason, W. Alex; Randall, G. Kevin; Spoth, Richard; Ralston, Ekaterina

2012-01-01

We investigated the influence of effective parenting behaviors (father and mother reports) and deviant peer association (adolescent reports) on subsequent young adolescent conduct problems (teacher reports) during grades 7-9, using structural equation modeling. Data were from a sample of 226 rural adolescents (n = 112 boys; n = 107 girls; n = 7…

30 CFR 250.449 - What additional BOP testing requirements must I meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

...? You must meet the following additional BOP testing requirements: (a) Use water to test a surface BOP system; (b) Stump test a subsea BOP system before installation. You must use water to conduct this test. You may use drilling fluids to conduct subsequent tests of a subsea BOP system; (c) Alternate tests...

Novel peapoded Li4Ti5O12 nanoparticles for high-rate and ultralong-life rechargeable lithium ion batteries at room and lower temperatures

NASA Astrophysics Data System (ADS)

Peng, Liang; Zhang, Huijuan; Fang, Ling; Zhang, Yan; Wang, Yu

2016-01-01

In this paper, a novel peapod-like Li4Ti5O12-C composite architecture with high conductivity is firstly designed and synthesized to be used as anode materials for lithium-ion batteries. In the synthesis, Na2Ti3O7 nanotubes act as precursors and sacrificial templates, and glucose molecules serve as the green carbon source, thus the peapod-like Li4Ti5O12-C composite can be fabricated by a facile hydrothermal reaction and the subsequent solid-state process. Compared to the previous reports, the as-prepared samples obtained by our new strategy exhibit excellent electrochemical performances, such as outstanding rate capability (an extremely reversible capability of 148 mA h g-1, 125 mA h g-1 at 30 C and 90 C, respectively) as well as excellent cycling performance (about 5% capacity loss after 5000 cycles at 10 C with 152 mA h g-1 capacity retained). The low-temperature measurements also demonstrate that the electrochemical performances of the peapod-like Li4Ti5O12-C composite are remarkably improved at various rate currents (at the low-temperature of -25 °C, a high Coulombic efficiency of about 99% can be achieved after 500 cycles at 10 C).In this paper, a novel peapod-like Li4Ti5O12-C composite architecture with high conductivity is firstly designed and synthesized to be used as anode materials for lithium-ion batteries. In the synthesis, Na2Ti3O7 nanotubes act as precursors and sacrificial templates, and glucose molecules serve as the green carbon source, thus the peapod-like Li4Ti5O12-C composite can be fabricated by a facile hydrothermal reaction and the subsequent solid-state process. Compared to the previous reports, the as-prepared samples obtained by our new strategy exhibit excellent electrochemical performances, such as outstanding rate capability (an extremely reversible capability of 148 mA h g-1, 125 mA h g-1 at 30 C and 90 C, respectively) as well as excellent cycling performance (about 5% capacity loss after 5000 cycles at 10 C with 152 mA h g-1 capacity retained). The low-temperature measurements also demonstrate that the electrochemical performances of the peapod-like Li4Ti5O12-C composite are remarkably improved at various rate currents (at the low-temperature of -25 °C, a high Coulombic efficiency of about 99% can be achieved after 500 cycles at 10 C). Electronic supplementary information (ESI) available: More SEM, EDS, TEM, and XPS data are available. See DOI: 10.1039/c5nr08399k

Gold nanoparticle-polymer nanocomposites synthesized by room temperature atmospheric pressure plasma and their potential for fuel cell electrocatalytic application

PubMed Central

Zhang, Ri-Chao; Sun, Dan; Zhang, Ruirui; Lin, Wen-Feng; Macias-Montero, Manuel; Patel, Jenish; Askari, Sadegh; McDonald, Calum; Mariotti, Davide; Maguire, Paul

2017-01-01

Conductive polymers have been increasingly used as fuel cell catalyst support due to their electrical conductivity, large surface areas and stability. The incorporation of metal nanoparticles into a polymer matrix can effectively increase the specific surface area of these materials and hence improve the catalytic efficiency. In this work, a nanoparticle loaded conductive polymer nanocomposite was obtained by a one-step synthesis approach based on room temperature direct current plasma-liquid interaction. Gold nanoparticles were directly synthesized from HAuCl4 precursor in poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The resulting AuNPs/PEDOT:PSS nanocomposites were subsequently characterized under a practical alkaline direct ethanol fuel cell operation condition for its potential application as an electrocatalyst. Results show that AuNPs sizes within the PEDOT:PSS matrix are dependent on the plasma treatment time and precursor concentration, which in turn affect the nanocomposites electrical conductivity and their catalytic performance. Under certain synthesis conditions, unique nanoscale AuNPs/PEDOT:PSS core-shell structures could also be produced, indicating the interaction at the AuNPs/polymer interface. The enhanced catalytic activity shown by AuNPs/PEDOT:PSS has been attributed to the effective electron transfer and reactive species diffusion through the porous polymer network, as well as the synergistic interfacial interaction at the metal/polymer and metal/metal interfaces. PMID:28436454

Gold nanoparticle-polymer nanocomposites synthesized by room temperature atmospheric pressure plasma and their potential for fuel cell electrocatalytic application

NASA Astrophysics Data System (ADS)

Zhang, Ri-Chao; Sun, Dan; Zhang, Ruirui; Lin, Wen-Feng; Macias-Montero, Manuel; Patel, Jenish; Askari, Sadegh; McDonald, Calum; Mariotti, Davide; Maguire, Paul

2017-04-01

Conductive polymers have been increasingly used as fuel cell catalyst support due to their electrical conductivity, large surface areas and stability. The incorporation of metal nanoparticles into a polymer matrix can effectively increase the specific surface area of these materials and hence improve the catalytic efficiency. In this work, a nanoparticle loaded conductive polymer nanocomposite was obtained by a one-step synthesis approach based on room temperature direct current plasma-liquid interaction. Gold nanoparticles were directly synthesized from HAuCl4 precursor in poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The resulting AuNPs/PEDOT:PSS nanocomposites were subsequently characterized under a practical alkaline direct ethanol fuel cell operation condition for its potential application as an electrocatalyst. Results show that AuNPs sizes within the PEDOT:PSS matrix are dependent on the plasma treatment time and precursor concentration, which in turn affect the nanocomposites electrical conductivity and their catalytic performance. Under certain synthesis conditions, unique nanoscale AuNPs/PEDOT:PSS core-shell structures could also be produced, indicating the interaction at the AuNPs/polymer interface. The enhanced catalytic activity shown by AuNPs/PEDOT:PSS has been attributed to the effective electron transfer and reactive species diffusion through the porous polymer network, as well as the synergistic interfacial interaction at the metal/polymer and metal/metal interfaces.

UV-light assisted patterned metallization of textile fabrics

NASA Astrophysics Data System (ADS)

Bahners, Thomas; Gebert, Beate; Prager, Andrea; Hartmann, Nils; Hagemann, Ulrich; Gutmann, Jochen S.

2018-04-01

A UV-assisted process allows full-faced or local deposition of silver domains on textiles made of natural as well as synthetic fibers, which act as nuclei for subsequent galvanic metallization. SEM and XPS analyses indicate that the process generates particulate depositions - particles, aggregates - of elementary silver. Masking the UV irradiation confines silver deposition strictly to the exposed areas thus allowing patterning. Adhesion of the deposited silver is high on the studied natural fiber cotton and polyamide fibers. Adhesion on smooth and chemically inert synthethic fibers such as, e.g., poly(ethylene terephthalate) or para- and meta-aramids could be enhanced by finishing with poly(vinylamine) thus providing complex-forming amino groups. Although the process does not deposit a closed, electrically conducting layer, all studied samples could be metallized by galvanization. The resulting metal coatings exhibit high conductivity and wash stability. Following a patterned silver deposition, the subsequent galvanic metallization produced conductive patterns of identical geometry thus opening an avenue towards printed circuits on textile fabrics.

Vortex developments over steady and accelerated airfoils incorporating a trailing edge jet

NASA Technical Reports Server (NTRS)

Finaish, F.; Okong'o, N.; Frigerio, J.

1993-01-01

Computational and experimental studies are conducted to investigate the influence of a trailing edge jet on flow separation and subsequent vortex formation over steady and accelerated airfoils at high angles of attack. A computer code, employing the stream function-vorticity approach, is developed and utilized to conduct numerical experiments on the flow problem. To verify and economize such efforts, an experimental system is developed and incorporated into a subsonic wind tunnel where streamline and vortex flow visualization experiments are conducted. The study demonstrates the role of the trailing edge jet in controlling flow separation and subsequent vortex development for steady and accelerating flow at angles past the static stall angle of attack. The results suggest that the concept of the trailing edge jet may be utilized to control the characteristics of unsteady separated flows over lifting surfaces. This control possibility seems to be quite effective and could have a significant role in controlling unsteady separated flows.

Performance indicators evaluation of the population-based breast cancer screening programme in Northern Portugal using the European Guidelines.

PubMed

Bento, Maria José; Gonçalves, Guilherme; Aguiar, Ana; Castro, Clara; Veloso, Vitor; Rodrigues, Vítor

2015-10-01

To evaluate the first 10 years of operation of the population-based breast cancer screening programme implemented in the Northern Region of Portugal, using selected recommended standard performance indicators. Data from women aged 50-69 screened with two-view mammography, biennially, in the period 2000-2009, were included. Main performance indicators were compared with the recommended levels of the European Guidelines. A total of 202,039 screening examinations were performed, 71,731 (35.5%) in the initial screening and 130,308 (64.5%) in the subsequent screening. Coverage rate by examination reached 74.3% of the target population, in the last period evaluated. Recall rates were 8.1% and 2.4% and cancer detection rates were 4.4/1000 and 2.9/1000 respectively, for initial and subsequent screenings. The breast cancer detection rate, expressed as a multiple of the background expected incidence was 3.1 in initial screen and 2.2 in subsequent screen. The incidence of invasive interval cancers met the desirable recommended levels both the first and second years since last screening examination, in the initial and subsequent screenings. Invasive tumours <15mm were 50.4% and 53.8% of the invasive cancers detected in initial and subsequent screenings. Less favourable size, grading and biomarkers expression were found in interval cancers compared to screen-detected cancers. Breast cancer screening programme in the Northern Region of Portugal was well accepted by the population. Most of the performance indicators were consistent with the desirable levels of the European Guidelines, which indicate an effective screening programme. Future research should verify the consistency of some of these results by using updated information from a larger population. Copyright © 2015 Elsevier Ltd. All rights reserved.

Differential heating: A versatile method for thermal conductivity measurements in high-energy-density matter

DOE PAGES

Ping, Y.; Fernandez-Panella, A.; Sio, H.; ...

2015-09-04

We propose a method for thermal conductivity measurements of high energy density matter based on differential heating. A temperature gradient is created either by surface heating of one material or at an interface between two materials by different energy deposition. The subsequent heat conduction across the temperature gradient is observed by various time-resolved probing techniques. Conceptual designs of such measurements using laser heating, proton heating, and x-ray heating are presented. As a result, the sensitivity of the measurements to thermal conductivity is confirmed by simulations.

The effects of rest interval length manipulation of the first upper-body resistance exercise in sequence on acute performance of subsequent exercises in men and women.

PubMed

Ratamess, Nicholas A; Chiarello, Christina M; Sacco, Anthony J; Hoffman, Jay R; Faigenbaum, Avery D; Ross, Ryan E; Kang, Jie

2012-11-01

The purpose of the present study was to investigate the effects of manipulating rest interval (RI) length of the first upper-body exercise in sequence on subsequent resistance exercise performance. Twenty-two men and women with at least 1 year of resistance training experience performed resistance exercise protocols on 3 occasions in random order. Each protocol consisted of performing 4 barbell upper-body exercises in the same sequence (bench press, incline bench press, shoulder press, and bent-over row) for 3 sets of up to 10 repetitions with 75% of 1 repetition maximum. Bench press RIs were 1, 2, or 3 minutes, whereas other exercises were performed with a standard 2-minute rest interval. The number of repetitions completed, average power, and velocity for each set of each exercise were recorded. Gender differences were observed during the bench press and incline press as women performed significantly (p ≤ 0.05) more repetitions than men during all RIs. The magnitude of decline in velocity and power over 3 sets of the bench press and incline press was significantly higher in men than women. Manipulation of RI length during the bench press did not affect performance of the remaining exercises in men. However, significantly more repetitions were performed by women during the first set of the incline press using 3-minute rest interval than 1-minute rest interval. In men and women, performance of the incline press and shoulder press was compromised compared with baseline performances. Manipulation of RI length of the first exercise affected performance of only the first set of 1 subsequent exercise in women. All RIs led to comparable levels of fatigue in men, indicating that reductions in load are necessary for subsequent exercises performed in sequence that stress similar agonist muscle groups when 10 repetitions are desired.

Should they stay or should they go? Leader duration and financial performance in local health departments.

PubMed

Jadhav, Emmanuel D; Holsinger, James W; Mays, Glen; Fardo, David

2015-01-01

The delivery of programs by local health departments (LHDs) has shifted from "if we do not have the money we don't do it" to LHD directors should "identify and fund public health priorities." This shift has subsequently increased performance expectations of LHD leaders. In the for-profit sector the leaders' failure to perform has resulted in a shortening tenure trend. Tenure is a proxy for human capital accumulation. In LHDs, the nature of association, if any, between leader tenure and agency performance is unknown. Examine association between financial performance of LHDs with short-, average-, and long-tenured LHD leaders. Variation in leader characteristics and percent change in expenditure were examined using a longitudinal cohort design and positive deviance methodology. Bivariate analysis of LHD financial performance and leader characteristics was conducted, and a logistic regression model was developed to test association between leader tenure and LHDs that experienced a positive percentage expenditure change. From a total of 2523 LHDs, 1453 were examined. The cross-sectional surveys of US public health agencies conducted by the National Association of County and City Health Officials in 2008 and 2010 contain the leader and LHD variables. Approximately 44% of LHDs experienced a positive percentage expenditure change. Leader tenure, age, gender, and education status were significantly associated with a positive percentage expenditure change using a chi-square test of independence. From the logistic regression analysis tenure, educational status, employment status, area population, governance, classification, and jurisdiction were statistically significant. Local health departments with leaders whose tenure was less than 2 years were less likely than those with average tenure to experience a positive percentage expenditure change. The odds ratios for tenure suggest that tenure is positively associated up to a threshold level and then declines. Implying that LHD financial performance is sensitive to leader tenure.

The Effects of Coping Interventions on Ability to Perform Under Pressure

PubMed Central

Kent, Sofie; Devonport, Tracey J.; Lane, Andrew M.; Nicholls, Wendy; Friesen, Andrew P.

2018-01-01

The ability to perform under pressure is necessary to achieve goals in various domains of life. We conducted a systematic review to synthesise findings from applied studies that focus on interventions developed to enhance an individual’s ability to cope under performance pressure. Following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines, a comprehensive search of five electronic databases was conducted. This yielded 66,618 records, of which 23 peer review papers met inclusion criteria of containing an intervention that targeted coping skills for performing under pressure. Using the Standard Quality Assessment for evaluation of primary research papers (Kmet et al., 2004) to assess quality, included studies performed well on reporting research objectives, research design, and statistical procedures. Sixteen studies showed poor quality in controlling for potentially confounding factors and small sample sizes. A narrative aggregate synthesis identified intervention studies that provided an educational focus (n = 9), consultancy sessions (n = 6), simulation training (n = 5) and emotion regulation strategies (n = 3). Findings highlight a need to; 1) establish a contextualized pressure task which will generate high levels of ecological validity for participants. Having established a suitable pressure task, 2) research should assess the effects of pressure by evaluating conscious and nonconscious effects and associated coping mechanisms, which should inform the subsequent development of interventions, and 3) assess interventions to enhance understanding of the ways in which they improve coping with pressure, or may fail, and the mechanisms which may explain these outcomes. Key points Simulation studies that exposed individuals to ‘pressure’ settings produced the most consistent improvements to performance, in comparison to a control group. This systematic review highlights limitations with the design, execution, and evaluation of pressure interventions. Future research should attempt to better consider the approach used to generate meaningful performance pressures and assess the consequences of pressure by evaluating conscious and non-conscious effects and coping mechanisms through which coping with pressure might be improved. PMID:29535577

Probing the influence of unconscious fear-conditioned visual stimuli on eye movements.

PubMed

Madipakkam, Apoorva Rajiv; Rothkirch, Marcus; Wilbertz, Gregor; Sterzer, Philipp

2016-11-01

Efficient threat detection from the environment is critical for survival. Accordingly, fear-conditioned stimuli receive prioritized processing and capture overt and covert attention. However, it is unknown whether eye movements are influenced by unconscious fear-conditioned stimuli. We performed a classical fear-conditioning procedure and subsequently recorded participants' eye movements while they were exposed to fear-conditioned stimuli that were rendered invisible using interocular suppression. Chance-level performance in a forced-choice-task demonstrated unawareness of the stimuli. Differential skin conductance responses and a change in participants' fearfulness ratings of the stimuli indicated the effectiveness of conditioning. However, eye movements were not biased towards the fear-conditioned stimulus. Preliminary evidence suggests a relation between the strength of conditioning and the saccadic bias to the fear-conditioned stimulus. Our findings provide no strong evidence for a saccadic bias towards unconscious fear-conditioned stimuli but tentative evidence suggests that such an effect may depend on the strength of the conditioned response. Copyright © 2016 Elsevier Inc. All rights reserved.

Electroactive Biofilms: Current Status and Future Research Needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borole, Abhijeet P; Reguera, Gemma; Ringeisen, Bradley

2011-01-01

Electroactive biofilms generated by electrochemically active microorganisms have many potential applications in bioenergy and chemicals production. This review assesses the effects of microbiological and process parameters on enrichment of such biofilms as well as critically evaluates the current knowledge of the mechanisms of extracellular electron transfer in BES systems. First we discuss the role of biofilm forming microorganisms vs. planktonic microorganisms. Physical, chemical and electrochemical parameters which dictate the enrichment and subsequent performance of the biofilms are discussed. Potential dependent biological parameters including biofilm growth rate, specific electron transfer rate and others and their relationship to BES system performance ismore » assessed. A review of the mechanisms of electron transfer in BES systems is included followed by a discussion of biofilm and its exopolymeric components and their electrical conductivity. A discussion of the electroactive biofilms in biocathodes is also included. Finally, we identify the research needs for further development of the electroactive biofilms to enable commercial applications.« less

Waterhammer Modeling for the Ares I Upper Stage Reaction Control System Cold Flow Development Test Article

NASA Technical Reports Server (NTRS)

Williams, Jonathan H.

2010-01-01

The Upper Stage Reaction Control System provides three-axis attitude control for the Ares I launch vehicle during active Upper Stage flight. The system design must accommodate rapid thruster firing to maintain the proper launch trajectory and thus allow for the possibility to pulse multiple thrusters simultaneously. Rapid thruster valve closure creates an increase in static pressure, known as waterhammer, which propagates throughout the propellant system at pressures exceeding nominal design values. A series of development tests conducted in the fall of 2009 at Marshall Space Flight Center were performed using a water-flow test article to better understand fluid performance characteristics of the Upper Stage Reaction Control System. A subset of the tests examined waterhammer along with the subsequent pressure and frequency response in the flight-representative system and provided data to anchor numerical models. This thesis presents a comparison of waterhammer test results with numerical model and analytical results. An overview of the flight system, test article, modeling and analysis are also provided.

Comparison of public peak detection algorithms for MALDI mass spectrometry data analysis.

PubMed

Yang, Chao; He, Zengyou; Yu, Weichuan

2009-01-06

In mass spectrometry (MS) based proteomic data analysis, peak detection is an essential step for subsequent analysis. Recently, there has been significant progress in the development of various peak detection algorithms. However, neither a comprehensive survey nor an experimental comparison of these algorithms is yet available. The main objective of this paper is to provide such a survey and to compare the performance of single spectrum based peak detection methods. In general, we can decompose a peak detection procedure into three consequent parts: smoothing, baseline correction and peak finding. We first categorize existing peak detection algorithms according to the techniques used in different phases. Such a categorization reveals the differences and similarities among existing peak detection algorithms. Then, we choose five typical peak detection algorithms to conduct a comprehensive experimental study using both simulation data and real MALDI MS data. The results of comparison show that the continuous wavelet-based algorithm provides the best average performance.

Monodisperse Porous Silicon Spheres as Anode Materials for Lithium Ion Batteries

NASA Astrophysics Data System (ADS)

Wang, Wei; Favors, Zachary; Ionescu, Robert; Ye, Rachel; Bay, Hamed Hosseini; Ozkan, Mihrimah; Ozkan, Cengiz S.

2015-03-01

Highly monodisperse porous silicon nanospheres (MPSSs) are synthesized via a simple and scalable hydrolysis process with subsequent surface-protected magnesiothermic reduction. The spherical nature of the MPSSs allows for a homogenous stress-strain distribution within the structure during lithiation and delithiation, which dramatically improves the electrochemical stability. To fully extract the real performance of the MPSSs, carbon nanotubes (CNTs) were added to enhance the electronic conductivity within the composite electrode structure, which has been verified to be an effective way to improve the rate and cycling performance of anodes based on nano-Si. The Li-ion battery (LIB) anodes based on MPSSs demonstrate a high reversible capacity of 3105 mAh g-1. In particular, reversible Li storage capacities above 1500 mAh g-1 were maintained after 500 cycles at a high rate of C/2. We believe this innovative approach for synthesizing porous Si-based LIB anode materials by using surface-protected magnesiothermic reduction can be readily applied to other types of SiOx nano/microstructures.

Evaluation of the micro-carburetor

NASA Technical Reports Server (NTRS)

Weiss, M. F.; Hall, R. A.; Mazor, S. D.

1981-01-01

A prototype sonic, variable-venturi automotive carburetor was evaluated for its effects on vehicle performance, fuel economy, and exhaust emissions. A 350 CID Chevrolet Impala vehicle was tested on a chassis dynamometer over the 1975 Federal Test Procedure, urban driving cycle. The Micro-carburetor was tested and compared with stock and modified-stock engine configurations. Subsequently, the test vehicle's performance characteristics were examined with the stock carburetor and again with the Micro-carburetor in a series of on-road driveability tests. The test engine was then removed from the vehicle and installed on an engine dynamometer. Engine tests were conducted to compare the fuel economy, thermal efficiency, and cylinder-to-cylinder mixture distribution of the Micro-carburetor to that of the stock configuration. Test results show increases in thermal efficiency and improvements in fuel economy at all test conditions. Improve fuel/air mixture preparation is implied from the information presented. Further improvements in fuel economy and exhaust emissions are possible through a detailed recalibration of the Micro-carburetor.

A Bias and Variance Analysis for Multistep-Ahead Time Series Forecasting.

PubMed

Ben Taieb, Souhaib; Atiya, Amir F

2016-01-01

Multistep-ahead forecasts can either be produced recursively by iterating a one-step-ahead time series model or directly by estimating a separate model for each forecast horizon. In addition, there are other strategies; some of them combine aspects of both aforementioned concepts. In this paper, we present a comprehensive investigation into the bias and variance behavior of multistep-ahead forecasting strategies. We provide a detailed review of the different multistep-ahead strategies. Subsequently, we perform a theoretical study that derives the bias and variance for a number of forecasting strategies. Finally, we conduct a Monte Carlo experimental study that compares and evaluates the bias and variance performance of the different strategies. From the theoretical and the simulation studies, we analyze the effect of different factors, such as the forecast horizon and the time series length, on the bias and variance components, and on the different multistep-ahead strategies. Several lessons are learned, and recommendations are given concerning the advantages, disadvantages, and best conditions of use of each strategy.

NBodyLab Simulation Experiments with GRAPE-6a AND MD-GRAPE2 Acceleration

NASA Astrophysics Data System (ADS)

Johnson, V.; Ates, A.

2005-12-01

NbodyLab is an astrophysical N-body simulation testbed for student research. It is accessible via a web interface and runs as a backend framework under Linux. NbodyLab can generate data models or perform star catalog lookups, transform input data sets, perform direct summation gravitational force calculations using a variety of integration schemes, and produce analysis and visualization output products. NEMO (Teuben 1994), a popular stellar dynamics toolbox, is used for some functions. NbodyLab integrators can optionally utilize two types of low-cost desktop supercomputer accelerators, the newly available GRAPE-6a (125 Gflops peak) and the MD-GRAPE2 (64-128 Gflops peak). The initial version of NBodyLab was presented at ADASS 2002. This paper summarizes software enhancements developed subsequently, focusing on GRAPE-6a related enhancements, and gives examples of computational experiments and astrophysical research, including star cluster and solar system studies, that can be conducted with the new testbed functionality.

Monodisperse porous silicon spheres as anode materials for lithium ion batteries.

PubMed

Wang, Wei; Favors, Zachary; Ionescu, Robert; Ye, Rachel; Bay, Hamed Hosseini; Ozkan, Mihrimah; Ozkan, Cengiz S

2015-03-05

Highly monodisperse porous silicon nanospheres (MPSSs) are synthesized via a simple and scalable hydrolysis process with subsequent surface-protected magnesiothermic reduction. The spherical nature of the MPSSs allows for a homogenous stress-strain distribution within the structure during lithiation and delithiation, which dramatically improves the electrochemical stability. To fully extract the real performance of the MPSSs, carbon nanotubes (CNTs) were added to enhance the electronic conductivity within the composite electrode structure, which has been verified to be an effective way to improve the rate and cycling performance of anodes based on nano-Si. The Li-ion battery (LIB) anodes based on MPSSs demonstrate a high reversible capacity of 3105 mAh g(-1). In particular, reversible Li storage capacities above 1500 mAh g(-1) were maintained after 500 cycles at a high rate of C/2. We believe this innovative approach for synthesizing porous Si-based LIB anode materials by using surface-protected magnesiothermic reduction can be readily applied to other types of SiOx nano/microstructures.

Evidence for Cognitive Remediation Therapy in Young People with Anorexia Nervosa: Systematic Review and Meta-analysis of the Literature.

PubMed

Tchanturia, Kate; Giombini, Lucia; Leppanen, Jenni; Kinnaird, Emma

2017-07-01

Cognitive remediation therapy (CRT) for eating disorders has demonstrated promising findings in adult age groups, with randomised treatment trials and systematic reviews demonstrating medium to large effect sizes in improved cognitive performance. In recent years, several case series have been conducted for young people with anorexia nervosa, but these findings have not been synthesised in the form of a systematic review. This systematic review aimed to evaluate the evidence for the efficacy of CRT in child and adolescent age groups. Nine studies were identified, with a subsequent meta-analysis suggesting improvements in cognitive performance with small effect sizes. Patient feedback was positive, with low dropout rates. These findings suggest that CRT has potential as a supplementary treatment for young people with anorexia nervosa, warranting further investigation using randomised treatment trials. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association.

Fatigue Behavior and Deformation Mechanisms in Inconel 718 Superalloy Investigated

NASA Technical Reports Server (NTRS)

2005-01-01

The nickel-base superalloy Inconel 718 (IN 718) is used as a structural material for a variety of components in the space shuttle main engine (SSME) and accounts for more than half of the total weight of this engine. IN 718 is the bill-of-material for the pressure vessels of nickel-hydrogen batteries for the space station. In the case of the space shuttle main engine, structural components are typically subjected to startup and shutdown load transients and occasional overloads in addition to high-frequency vibratory loads from routine operation. The nickel-hydrogen battery cells are prooftested before service and are subjected to fluctuating pressure loads during operation. In both of these applications, the structural material is subjected to a monotonic load initially, which is subsequently followed by fatigue. To assess the life of these structural components, it is necessary to determine the influence of a prior monotonic load on the subsequent fatigue life of the superalloy. An insight into the underlying deformation and damage mechanisms is also required to properly account for the interaction between the prior monotonic load and the subsequent fatigue loading. An experimental investigation was conducted to establish the effect of prior monotonic straining on the subsequent fatigue behavior of wrought, double-aged, IN 718 at room temperature. First, monotonic strain tests and fully-reversed, strain-controlled fatigue tests were conducted on uniform-gage-section IN 718 specimens. Next, fully reversed fatigue tests were conducted under strain control on specimens that were monotonically strained in tension. Results from this investigation indicated that prior monotonic straining reduced the fatigue resistance of the superalloy particularly at the lowest strain range. Some of the tested specimens were sectioned and examined by transmission electron microscopy to reveal typical microstructures as well as the active deformation and damage mechanisms under each of the loading conditions. In monotonically strained specimens, deformation during the subsequent fatigue loading was mainly confined to the deformation bands initiated during the prior monotonic straining. This can cause dislocations to move more readily along the previously activated deformation bands and to pile up near grain boundaries, eventually making the grain boundaries susceptible to fatigue crack initiation. The mechanisms inferred from the microstructural investigation were extremely valuable in interpreting the influence of prior monotonic straining on the subsequent fatigue life of Inconel 718 superalloy.

Resistance of the peripheral nervous system to the effects of chronic canine hypothyroidism.

PubMed

Rossmeisl, J H

2010-01-01

Hypothyroidism has been implicated in the development of multiple peripheral mono- and polyneuropathies in dogs. The objectives of this study were to evaluate the clinical and electrophysiologic effects of experimentally induced hypothyroidism on the peripheral nervous system of dogs. Chronic hypothyroidism will induce peripheral nerve sensorimotor dysfunction. Eighteen purpose-bred, female dogs. Prospective, longitudinal study: Hypothyroidism was induced by radioactive iodine administration in 9 dogs, and the remaining 9 served as untreated controls. Neurological examinations were performed monthly. Electrophysiologic testing consisting of electromyography (EMG); motor nerve conduction studies of the sciatic-tibial, radial, ulnar, and recurrent laryngeal nerves; sciatic-tibial and ulnar F-wave studies; sensory nerve conduction studies of the tibial, ulnar, and radial nerves; and evaluation of blink reflex and facial responses were performed before and 6, 12, and 18 months after induction of hypothyroidism and compared with controls. Clinical evidence of peripheral nervous dysfunction did not occur in any dog. At 6 month and subsequent evaluations, all hypothyroid dogs had EMG and histologic evidence of hypothyroid myopathy. Hypothyroid dogs had significant (Por=.1) or sensory nerve conduction velocity (P>or=.24) or nerve roots (P>or=.16) throughout the study period, with values remaining within reference ranges in all dogs. Chronic hypothyroidism induced by thyroid irradiation does not result in clinical or electrophysiologic evidence of peripheral neuropathy, but does cause subclinical myopathy.

Change Detection via Cross-Borehole and VSP Seismic Surveys for the Source Physics Experiments (SPE) at the Nevada National Security Site (NNSS)

NASA Astrophysics Data System (ADS)

Knox, H. A.; Abbott, R. E.; Bonal, N. D.; Aldridge, D. F.; Preston, L. A.; Ober, C.

2012-12-01

In support of the Source Physics Experiment (SPE) at the Nevada National Security Site (NNSS), we have conducted two cross-borehole seismic experiments in the Climax Stock. The first experiment was conducted prior to the third shot in this multi-detonation program using two available boreholes and the shot hole, while the second experiment was conducted after the shot using four of the available boreholes. The first study focused on developing a well-characterized 2D pre-explosion Vp model including two VSPs and a seismic refraction survey, as well as quantifying baseline waveform similarity at reoccupied sites. This was accomplished by recording both "sparker" and accelerated weight drop sources on a hydrophone string and surface geophones. In total more than 18,500 unique source-receiver pairs were acquired during this testing. In the second experiment, we reacquired aproximately 8,800 source-receiver pairs and performed a cross-line survey allowing for a 3D post-explosion Vp model. The data acquired from the reoccupied sites was processed using cross-correlation methods and change detection methodologies, including comparison of the tomographic images. The survey design and subsequent processing provided an opportunity to investigate seismic wave propagation through damaged rock. We also performed full waveform forward modelling for a granitic body hosting a perched aquifer. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

AGSuite: Software to conduct feature analysis of artificial grammar learning performance.

PubMed

Cook, Matthew T; Chubala, Chrissy M; Jamieson, Randall K

2017-10-01

To simplify the problem of studying how people learn natural language, researchers use the artificial grammar learning (AGL) task. In this task, participants study letter strings constructed according to the rules of an artificial grammar and subsequently attempt to discriminate grammatical from ungrammatical test strings. Although the data from these experiments are usually analyzed by comparing the mean discrimination performance between experimental conditions, this practice discards information about the individual items and participants that could otherwise help uncover the particular features of strings associated with grammaticality judgments. However, feature analysis is tedious to compute, often complicated, and ill-defined in the literature. Moreover, the data violate the assumption of independence underlying standard linear regression models, leading to Type I error inflation. To solve these problems, we present AGSuite, a free Shiny application for researchers studying AGL. The suite's intuitive Web-based user interface allows researchers to generate strings from a database of published grammars, compute feature measures (e.g., Levenshtein distance) for each letter string, and conduct a feature analysis on the strings using linear mixed effects (LME) analyses. The LME analysis solves the inflation of Type I errors that afflicts more common methods of repeated measures regression analysis. Finally, the software can generate a number of graphical representations of the data to support an accurate interpretation of results. We hope the ease and availability of these tools will encourage researchers to take full advantage of item-level variance in their datasets in the study of AGL. We moreover discuss the broader applicability of the tools for researchers looking to conduct feature analysis in any field.

Decolorization of Acid Orange 7 by an electric field-assisted modified orifice plate hydrodynamic cavitation system: Optimization of operational parameters.

PubMed

Jung, Kyung-Won; Park, Dae-Seon; Hwang, Min-Jin; Ahn, Kyu-Hong

2015-09-01

In this study, the decolorization of Acid Orange 7 (AO-7) with intensified performance was obtained using hydrodynamic cavitation (HC) combined with an electric field (graphite electrodes). As a preliminary step, various HC systems were compared in terms of decolorization, and, among them, the electric field-assisted modified orifice plate HC (EFM-HC) system exhibited perfect decolorization performance within 40 min of reaction time. Interestingly, when H2O2 was injected into the EFM-HC system as an additional oxidant, the reactor performance gradually decreased as the dosing ratio increased; thus, the remaining experiments were performed without H2O2. Subsequently, an optimization process was conducted using response surface methodology with a Box-Behnken design. The inlet pressure, initial pH, applied voltage, and reaction time were chosen as operational key factors, while decolorization was selected as the response variable. The overall performance revealed that the selected parameters were either slightly interdependent, or had significant interactive effects on the decolorization. In the verification test, complete decolorization was observed under statistically optimized conditions. This study suggests that EFM-HC is a useful method for pretreatment of dye wastewater with positive economic and commercial benefits. Copyright © 2015 Elsevier B.V. All rights reserved.

The production and perception of emotionally expressive walking sounds: similarities between musical performance and everyday motor activity.

PubMed

Giordano, Bruno L; Egermann, Hauke; Bresin, Roberto

2014-01-01

Several studies have investigated the encoding and perception of emotional expressivity in music performance. A relevant question concerns how the ability to communicate emotions in music performance is acquired. In accordance with recent theories on the embodiment of emotion, we suggest here that both the expression and recognition of emotion in music might at least in part rely on knowledge about the sounds of expressive body movements. We test this hypothesis by drawing parallels between musical expression of emotions and expression of emotions in sounds associated with a non-musical motor activity: walking. In a combined production-perception design, two experiments were conducted, and expressive acoustical features were compared across modalities. An initial performance experiment tested for similar feature use in walking sounds and music performance, and revealed that strong similarities exist. Features related to sound intensity, tempo and tempo regularity were identified as been used similarly in both domains. Participants in a subsequent perception experiment were able to recognize both non-emotional and emotional properties of the sound-generating walkers. An analysis of the acoustical correlates of behavioral data revealed that variations in sound intensity, tempo, and tempo regularity were likely used to recognize expressed emotions. Taken together, these results lend support the motor origin hypothesis for the musical expression of emotions.

Performance characterizations of asphalt binders and mixtures incorporating silane additive ZycoTherm

NASA Astrophysics Data System (ADS)

Hasan, Mohd Rosli Mohd; Hamzah, Meor Othman; Yee, Teh Sek

2017-10-01

Experimental works were conducted to evaluate the properties of asphalt binders and mixtures produced using a relatively new silane additive, named ZycoTherm. In this study, 0.1wt% ZycoTherm was blended with asphalt binder to enable production of asphalt mixture at lower than normal temperatures, as well as improve mix workability and compactability. Asphalt mixture performances towards pavement distresses in tropical climate region were also investigated. The properties of control asphalt binders (60/70 and 80/10 penetration grade) and asphalt binders incorporating 0.1% ZycoTherm were reported based on the penetration, softening point, rotational viscosity, complex modulus and phase angle. Subsequently, to compare the performance of asphalt mixture incorporating ZycoTherm with the control asphalt mixture, cylindrical samples were prepared at recommended temperatures and air voids depending on the binder types and test requirements. The samples were tested for indirect tensile strength (ITS), resilient modulus, dynamic creep, Hamburg wheel tracking and moisture induced damage. From compaction data using the Servopak gyratory compactor, specimen prepared using ZycoTherm exhibit higher workability and compactability compared to the conventional mixture. From the mixture performance test results, mixtures prepared with ZycoTherm showed comparable if not better performance than the control sample in terms of the resistance to moisture damage, permanent deformation and cracking.

Pediatric CT Scans

Cancer.gov

The Radiation Epidemiology Branch and collaborators have initiated a retrospective cohort study to evaluate the relationship between radiation exposure from CT scans conducted during childhood and adolescence and the subsequent development of cancer.

Shame in Medical Education: A Randomized Study of the Acquisition of Intimate Examination Skills and Its Effect on Subsequent Performance.

PubMed

Hautz, Wolf E; Schröder, Therese; Dannenberg, Katja A; März, Maren; Hölzer, Henrike; Ahlers, Olaf; Thomas, Anke

2017-01-01

Although medical students are exposed to a variety of emotions, the impact of emotions on learning has received little attention so far. Shame-provoking intimate examinations are among the most memorable events for students. Their emotions, however, are rarely addressed during training, potentially leading to withdrawal and avoidance and, consequently, performance deficits. However, emotions of negative valance such as shame may be particularly valuable for learning, as they might prompt mental rehearsal. We investigated the effect of shame on learning from the perspective of cognitive load theory. We hypothesized that (a) training modality determines state shame, (b) state shame directly affects the quality of a clinical breast examination as one example of a shame-provoking exam, and (c) students who experience shame during training outperform those who just discuss the emotion during subsequent performance assessments. Forty-nine advanced medical students participated in a randomized controlled, single-blinded study. After a basic, low-fidelity breast examination training, students were randomized to further practice either on a high-fidelity mannequin including a discussion of their emotions or by examining a standardized patient's real breasts. Last, all students conducted a breast examination in a simulated doctor's office. Dependent variables were measures of outcome and process quality and of situational shame. Students training with a standardized patient experienced more shame during training (p < .001, d = 2.19), spent more time with the patient (p = .005, d = 0.89), and documented more breast lumps (p = .026, d = 0.65) than those training on a mannequin. Shame interacted with training modality, F(1, 45) = 21.484, p < .001, η 2 = 0.323, and differences in performance positively correlated to decline in state shame (r = .335, p = .022). Students experiencing state shame during training do reenact their training and process germane load-in other words, learn. Furthermore, altering simulation modality offers a possibility for educators to adjust the affective component of training to their objectives.

Beta-Ga2O3: A transparent conductive oxide for potential resistive switching applications

NASA Astrophysics Data System (ADS)

Zheng, Xiaohao

My primary research focus is controlling conductivity in Ga2O3, with the broader goal of seeking both new materials science and possible applications. Regarding new materials science, the key goal is to elucidate connections between defects and conductivity in β- Ga2O3, then, based on an understanding of the conduction mechanism of Ga2O3, determine and evaluate the potential of β-Ga2O3 as a resistive switching (RS) material. To systematically investigate the feasibility of Ga2O3 in memristor applications, several aspects was examined. One of the first questions to be answered is how defects play a role in the conductivity of Ga2O3. To establish connections between conductivity and defects, a direct approach is to investigate the connections between the local structure and the concomitant electronic responses, paying particular attention to the role of both intrinsic and extrinsic defects. The approach I used was to compare the directional and thermal dependence of the conductivity induced through annealing in various environments (i.e., intentionally changing the intrinsic and extrinsic defect concentrations), and elucidate the roles of dimensionality and sample processing in controlling these processes through a comparison of the bulk. Such a strategy involves careful characterization of both the atomic and electronic structure at both nanoscopic and macroscopic length scales. Although various calculations has predicted conductivity is independent from oxygen vacancy, no experimental work is reported as supports to theoretical studies due to the hardness to dissociate oxygen vacancy increase from other defect changes, such as Hydrogen interstitial increase, surface band bending reduction from surface population of charged vacancies, metal contact to Ga2O3 interface changes, etc . We intentionally inject and/or remove oxygen defects through annealing in oxidizing and reducing atmospheres. The effects of such annealing treatments were investigated using X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and a physical property measurement system (PPMS) to determine chemical and electronic structure, surface characteristics, and transport properties, respectively. Next, we want to determine the most efficient way to induce a defect concentration change. Electrical field-induced redox reactions and thermal power-induced defect migration are two major driving forces of current RS materials. In this case, I employed two approaches when annealing samples: applying a direct current to the sample, which subjects the material to both an electric field and an elevated temperature, and thermally heating the sample using a resistive heating block. The contribution of contact to Ga2O3 interfaces are also intensively investigated, opposed to in single crystal study, experiments were designed to avoid contact uncertainties. Changes in the conductivity were subsequently examined by electrical measurements. By seeking answers to the above questions, we found evidences to defect agglomerations, likely Ga vacancies, in single crystal Ga2O3 and determined its potentials to be controlled thermally and electrically. As a result, we can switch bulk single crystal Ga2O3 between high conductivity and low conductivity states. To realize this resistive switching behavior in a device, a set of experiments to synthesize Ga2O3 films with desired properties and optimize both the device geometry and contact conditions was conducted. A subsequent investigation into device performance and analyses of the structural and interfacial characteristics of the devices was performed. Thus, this thesis aims to answer three major questions, two of which relate to the intrinsic properties of Ga2O3 and one that is associated with device fabrication and characterization. In this report, common "to understand" and "to utilize" strategies were followed to address Ga2O3 resistive switching in two parts: Ga2O3 material investigation and Ga2O3 resistive switching applications.

The carry-over effect of competition in task-sharing: evidence from the joint Simon task.

PubMed

Iani, Cristina; Anelli, Filomena; Nicoletti, Roberto; Rubichi, Sandro

2014-01-01

The Simon effect, that is the advantage of the spatial correspondence between stimulus and response locations when stimulus location is a task-irrelevant dimension, occurs even when the task is performed together by two participants, each performing a go/no-go task. Previous studies showed that this joint Simon effect, considered by some authors as a measure of self-other integration, does not emerge when during task performance co-actors are required to compete. The present study investigated whether and for how long competition experienced during joint performance of one task can affect performance in a following joint Simon task. In two experiments, we required pairs of participants to perform together a joint Simon task, before and after jointly performing together an unrelated non-spatial task (the Eriksen flanker task). In Experiment 1, participants always performed the joint Simon task under neutral instructions, before and after performing the joint flanker task in which they were explicitly required either to cooperate with (i.e., cooperative condition) or to compete against a co-actor (i.e., competitive condition). In Experiment 2, they were required to compete during the joint flanker task and to cooperate during the subsequent joint Simon task. Competition experienced in one task affected the way the subsequent joint task was performed, as revealed by the lack of the joint Simon effect, even though, during the Simon task participants were not required to compete (Experiment 1). However, prior competition no longer affected subsequent performance if a new goal that created positive interdependence between the two agents was introduced (Experiment 2). These results suggest that the emergence of the joint Simon effect is significantly influenced by how the goals of the co-acting individuals are related, with the effect of competition extending beyond the specific competitive setting and affecting subsequent interactions.

Different role of TTX-sensitive voltage-gated sodium channel (NaV 1) subtypes in action potential initiation and conduction in vagal airway nociceptors.

PubMed

Kollarik, M; Sun, H; Herbstsomer, R A; Ru, F; Kocmalova, M; Meeker, S N; Undem, B J

2018-04-15

The action potential initiation in the nerve terminals and its subsequent conduction along the axons of afferent nerves are not necessarily dependent on the same voltage-gated sodium channel (Na V 1) subunits. The action potential initiation in jugular C-fibres within airway tissues is not blocked by TTX; nonetheless, conduction of action potentials along the vagal axons of these nerves is often dependent on TTX-sensitive channels. This is not the case for nodose airway Aδ-fibres and C-fibres, where both action potential initiation and conduction is abolished by TTX or selective Na V 1.7 blockers. The difference between the initiation of action potentials within the airways vs. conduction along the axons should be considered when developing Na V 1 blocking drugs for topical application to the respiratory tract. The action potential (AP) initiation in the nerve terminals and its subsequent AP conduction along the axons do not necessarily depend on the same subtypes of voltage-gated sodium channels (Na V 1s). We evaluated the role of TTX-sensitive and TTX-resistant Na V 1s in vagal afferent nociceptor nerves derived from jugular and nodose ganglia innervating the respiratory system. Single cell RT-PCR was performed on vagal afferent neurons retrogradely labelled from the guinea pig trachea. Almost all of the jugular neurons expressed the TTX-sensitive channel Na V 1.7 along with TTX-resistant Na V 1.8 and Na V 1.9. Tracheal nodose neurons also expressed Na V 1.7 but, less frequently, Na V 1.8 and Na V 1.9. Na V 1.6 were expressed in ∼40% of the jugular and 25% of nodose tracheal neurons. Other Na V 1 α subunits were only rarely expressed. Single fibre recordings were made from the vagal nodose and jugular nerve fibres innervating the trachea or lung in the isolated perfused vagally-innervated preparations that allowed for selective drug delivery to the nerve terminal compartment (AP initiation) or to the desheathed vagus nerve (AP conduction). AP initiation in jugular C-fibres was unaffected by TTX, although it was inhibited by Na V 1.8 blocker (PF-01247324) and abolished by combination of TTX and PF-01247324. However, AP conduction in the majority of jugular C-fibres was abolished by TTX. By contrast, both AP initiation and conduction in nodose nociceptors was abolished by TTX or selective Na V 1.7 blockers. Distinction between the effect of a drug with respect to inhibiting AP in the nerve terminals within the airways vs. at conduction sites along the vagus nerve is relevant to therapeutic strategies involving inhaled Na V 1 blocking drugs. © 2018 The Authors. The Journal of Physiology © 2018 The Physiological Society.

A simplified focusing and astigmatism correction method for a scanning electron microscope

NASA Astrophysics Data System (ADS)

Lu, Yihua; Zhang, Xianmin; Li, Hai

2018-01-01

Defocus and astigmatism can lead to blurred images and poor resolution. This paper presents a simplified method for focusing and astigmatism correction of a scanning electron microscope (SEM). The method consists of two steps. In the first step, the fast Fourier transform (FFT) of the SEM image is performed and the FFT is subsequently processed with a threshold to achieve a suitable result. In the second step, the threshold FFT is used for ellipse fitting to determine the presence of defocus and astigmatism. The proposed method clearly provides the relationships between the defocus, the astigmatism and the direction of stretching of the FFT, and it can determine the astigmatism in a single image. Experimental studies are conducted to demonstrate the validity of the proposed method.

Electrochemical properties of high-power supercapacitors using ordered NiO coated Si nanowire array electrodes

NASA Astrophysics Data System (ADS)

Lu, Fang; Qiu, Mengchun; Qi, Xiang; Yang, Liwen; Yin, Jinjie; Hao, Guolin; Feng, Xiang; Li, Jun; Zhong, Jianxin

2011-08-01

Highly ordered NiO coated Si nanowire arrays are fabricated as electrode materials for electrochemical supercapacitors (ES) via depositing Ni on electroless-etched Si nanowires and subsequently annealing. The electrochemical tests reveal that the constructed electrode has superior electrical conductibility and more active sites per unit area for chemical reaction processes, thereby possessing good cycle stability, high specific capacity, and low internal resistance. The specific capacity is up to 787.5 F g-1 at a discharge current of 2.5 mA and decreases slightly with 4.039% loss after 500 cycles, while the equivalent internal resistance is ˜3.067 Ω. Owing to its favorable electrochemical performance, this ordered hybrid array nanostructure is a promising electrode material in future commercial ES.

Alkali reduction of graphene oxide in molten halide salts: production of corrugated graphene derivatives for high-performance supercapacitors.

PubMed

Abdelkader, Amr M; Vallés, Cristina; Cooper, Adam J; Kinloch, Ian A; Dryfe, Robert A W

2014-11-25

Herein we present a green and facile approach to the successful reduction of graphene oxide (GO) materials using molten halide flux at 370 °C. GO materials have been synthesized using a modified Hummers method and subsequently reduced for periods of up to 8 h. Reduced GO (rGO) flakes have been characterized using X-ray-diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR), all indicating a significantly reduced amount of oxygen-containing functionalities on the rGO materials. Furthermore, impressive electrical conductivities and electrochemical capacitances have been measured for the rGO flakes, which, along with the morphology determined from scanning electron microscopy, highlight the role of surface corrugation in these rGO materials.

Responses of Cardiac Tissue to Simulated Weightlessness

NASA Technical Reports Server (NTRS)

Tahimic, Candice; Steczina, Sonette; Terada, Masahiro; Shirazi-Fard, Yasaman; Schreurs, Ann-Sofie; Goukassian, David; Globus, Ruth

2017-01-01

Our current study aims to determine the molecular mechanisms that underlie these cardiac changes in response to spaceflight. The central hypothesis of our study is that long duration simulated weightlessness and subsequent recovery causes select and persistent changes in gene expression and oxidative defense-related pathways. In this study, we will first conduct general analyses of three-month old male and female animals, focusing on two key long-duration time points, (i.e. after 90 days of simulated weightlessness (HU) and after 90 days recovery from 90 days of HU. Both rat-specific gene arrays and qPCR will be performed focusing on genes already implicated in oxidative stress responses and cardiac disease. Gene expression analyses will be complemented by biochemical tests of frozen tissue lysates for select markers of oxidative damage.

Achieving high power factor and output power density in p-type half-Heuslers Nb1-xTixFeSb.

PubMed

He, Ran; Kraemer, Daniel; Mao, Jun; Zeng, Lingping; Jie, Qing; Lan, Yucheng; Li, Chunhua; Shuai, Jing; Kim, Hee Seok; Liu, Yuan; Broido, David; Chu, Ching-Wu; Chen, Gang; Ren, Zhifeng

2016-11-29

Improvements in thermoelectric material performance over the past two decades have largely been based on decreasing the phonon thermal conductivity. Enhancing the power factor has been less successful in comparison. In this work, a peak power factor of ∼106 μW⋅cm -1 ⋅K -2 is achieved by increasing the hot pressing temperature up to 1,373 K in the p-type half-Heusler Nb 0.95 Ti 0.05 FeSb. The high power factor subsequently yields a record output power density of ∼22 W⋅cm -2 based on a single-leg device operating at between 293 K and 868 K. Such a high-output power density can be beneficial for large-scale power generation applications.

Achieving high power factor and output power density in p-type half-Heuslers Nb1-xTixFeSb

PubMed Central

He, Ran; Kraemer, Daniel; Mao, Jun; Zeng, Lingping; Jie, Qing; Lan, Yucheng; Li, Chunhua; Shuai, Jing; Kim, Hee Seok; Liu, Yuan; Broido, David; Chu, Ching-Wu; Chen, Gang; Ren, Zhifeng

2016-01-01

Improvements in thermoelectric material performance over the past two decades have largely been based on decreasing the phonon thermal conductivity. Enhancing the power factor has been less successful in comparison. In this work, a peak power factor of ∼106 μW⋅cm−1⋅K−2 is achieved by increasing the hot pressing temperature up to 1,373 K in the p-type half-Heusler Nb0.95Ti0.05FeSb. The high power factor subsequently yields a record output power density of ∼22 W⋅cm−2 based on a single-leg device operating at between 293 K and 868 K. Such a high-output power density can be beneficial for large-scale power generation applications. PMID:27856743

Data base development and research and editorial support

NASA Technical Reports Server (NTRS)

1988-01-01

The Life Sciences Bibliographic Data Base was created in 1981 and subsequently expanded. A systematic, professional system was developed to collect, organize, and disseminate information about scientific publications resulting from research. The data base consists of bibliographic information and hard copies of all research papers published by Life Sciences-supported investigators. Technical improvements were instituted in the database. To minimize costs, take advantage of advances in personal computer technology, and achieve maximum flexibility and control, the data base was transferred from the JSC computer to personal computers at George Washington University (GWU). GWU also performed a range of related activities such as conducting in-depth searches on a variety of subjects, retrieving scientific literature, preparing presentations, summarizing research progress, answering correspondence requiring reference support, and providing writing and editorial support.

Impairment of Arterial Compliance in Cushing’s Syndrome

PubMed Central

Maria Zedda, Angela; Mercuro, Giuseppe

2014-01-01

Abstract Arterial stiffness may be useful for stratifying cardiovascular risk in individuals suffering from a number of pathologies, such as hypertension, diabetes, obesity, dyslipidaemia and coronary artery disease. Cushing’s syndrome is underpinned by a complex metabolic syndrome, which is potentially implicated in the onset of blood vessel alterations and the increase in arterial wall stiffness. The aim of this paper was to perform a review about the most important studies conducted in order to evaluate the arterial distensibility profile of subjects affected by Cushing’s syndrome. Increased arterial stiffness may persist even after successful cure of this disease. It is therefore of fundamental importance to identify the presence of early vascular alterations in these patients, in order to commence their treatment and thus attempt to prevent the subsequent onset of adverse cardiovascular events.

High-pressure LOX/hydrocarbon preburners and gas generators

NASA Technical Reports Server (NTRS)

Huebner, A. W.

1981-01-01

The objective of the program was to conduct a small scale hardware test program to establish the technology base required for LOX/hydrocarbon preburners and gas generators. The program consisted of six major tasks; Task I reviewed and assessed the performance prediction models and defined a subscale test program. Task II designed and fabricated this subscale hardware. Task III tested and analyzed the data from this hardware. Task IV analyzed the hot fire results and formulated a preliminary design for 40K preburner assemblies. Task V took the preliminary design and detailed and fabricated three 40K size preburner assemblies, one each fuel-rich LOX/CH, and LOX/RP-1 and one oxidizer rich LOX/CH4. Task VI delivered these preburner assemblies to MSFC for subsequent evaluation.

The role of the medical laboratory technologist in drinking and driving cases. Part 2: The use of hospital alcohol results as evidence and providing testimony in court.

PubMed

Westenbrink, W

1992-01-01

Medical laboratory technologists routinely conduct alcohol analyses for medical purposes, however, in certain circumstances the results are used legally to determine a driver's Blood Alcohol Concentration. The technologist who performed the analysis may subsequently be required to provide evidence in court. The primary areas of interest to the court in these cases are: the type of swab utilized, the continuity of the blood sample, the method of analysis, the margin of error of the results, and the conversion of a serum alcohol concentration to a blood alcohol concentration in units as per the Criminal Code. Pre-trial preparation, courtroom procedures, and suggestions to enhance the technologist's credibility as a professional witness are outlined.

The effects of free recall testing on subsequent source memory.

PubMed

Brewer, Gene A; Marsh, Richard L; Meeks, Joseph T; Clark-Foos, Arlo; Hicks, Jason L

2010-05-01

The testing effect is the finding that prior retrieval of information from memory will result in better subsequent memory for that material. One explanation for these effects is that initial free recall testing increases the recollective details for tested information, which then becomes more available during a subsequent test phase. In three experiments we explored this hypothesis using a source-monitoring test phase after the initial free recall tests. We discovered that memory is differentially enhanced for certain recollective details depending on the nature of the free recall task. Thus further research needs to be conducted to specify how different kinds of memorial details are enhanced by free recall testing.

School Connectedness Buffers the Effects of Negative Family Relations and Poor Effortful Control on Early Adolescent Conduct Problems

ERIC Educational Resources Information Center

Loukas, Alexandra; Roalson, Lori A.; Herrera, Denise E.

2010-01-01

This study examined the unique and interactive contributions of school connectedness, negative family relations, and effortful control to subsequent early adolescent conduct problems. Data were collected from 476 adolescents when they were initially in the 6th and 7th grades and again 1 year later. Results from hierarchical regression analyses…

Social Media Use of Cooperative Extension Family Economics Educators: Online Survey Results and Implications

ERIC Educational Resources Information Center

O'Neill, Barbara; Zumwalt, Andrew; Bechman, Janet

2011-01-01

This article describes results of an online survey conducted by the eXtension Financial Security for All (FSA) Community of Practice (CoP) to determine the social media capacity and activity of its members. The survey was conducted to inform two subsequent FSA CoP programs: an archived webinar on social media programs and impact evaluation methods…

Community and Staff Surveys Conducted for the Sacramento City Unified School District. Summary Report [and] Appendices.

ERIC Educational Resources Information Center

Franz, Jennifer D.

Community and staff surveys, conducted in 1982, were commissioned by the Sacramento City (CA) Unified School District Board of Education as part of a project designed by the District's five high school principals. This report is limited to a presentation of the survey results. A subsequent report to be developed will present conclusions and any…

Electron and hole photoemission detection for band offset determination of tunnel field-effect transistor heterojunctions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Wei; Key Laboratory for the Physics and Chemistry of Nanodevices and Department of Electronics, Peking University, Beijing 100871; Zhang, Qin

2014-11-24

We report experimental methods to ascertain a complete energy band alignment of a broken-gap tunnel field-effect transistor based on an InAs/GaSb hetero-junction. By using graphene as an optically transparent electrode, both the electron and hole barrier heights at the InAs/GaSb interface can be quantified. For a Al{sub 2}O{sub 3}/InAs/GaSb layer structure, the barrier height from the top of the InAs and GaSb valence bands to the bottom of the Al{sub 2}O{sub 3} conduction band is inferred from electron emission whereas hole emissions reveal the barrier height from the top of the Al{sub 2}O{sub 3} valence band to the bottom ofmore » the InAs and GaSb conduction bands. Subsequently, the offset parameter at the broken gap InAs/GaSb interface is extracted and thus can be used to facilitate the development of predicted models of electron quantum tunneling efficiency and transistor performance.« less

TOUGH-RBSN simulator for hydraulic fracture propagation within fractured media: Model validations against laboratory experiments

NASA Astrophysics Data System (ADS)

Kim, Kunhwi; Rutqvist, Jonny; Nakagawa, Seiji; Birkholzer, Jens

2017-11-01

This paper presents coupled hydro-mechanical modeling of hydraulic fracturing processes in complex fractured media using a discrete fracture network (DFN) approach. The individual physical processes in the fracture propagation are represented by separate program modules: the TOUGH2 code for multiphase flow and mass transport based on the finite volume approach; and the rigid-body-spring network (RBSN) model for mechanical and fracture-damage behavior, which are coupled with each other. Fractures are modeled as discrete features, of which the hydrological properties are evaluated from the fracture deformation and aperture change. The verification of the TOUGH-RBSN code is performed against a 2D analytical model for single hydraulic fracture propagation. Subsequently, modeling capabilities for hydraulic fracturing are demonstrated through simulations of laboratory experiments conducted on rock-analogue (soda-lime glass) samples containing a designed network of pre-existing fractures. Sensitivity analyses are also conducted by changing the modeling parameters, such as viscosity of injected fluid, strength of pre-existing fractures, and confining stress conditions. The hydraulic fracturing characteristics attributed to the modeling parameters are investigated through comparisons of the simulation results.

The Effect of the Number of Carries on Injury Risk and Subsequent Season's Performance Among Running Backs in the National Football League.

PubMed

Kraeutler, Matthew J; Belk, John W; McCarty, Eric C

2017-02-01

In recent years, several studies have correlated pitch count with an increased risk for injury among baseball pitchers. However, no studies have attempted to draw a similar conclusion based on number of carries by running backs (RBs) in football. To determine whether there is a correlation between number of carries by RBs in the National Football League (NFL) and risk of injury or worsened performance in the subsequent season. Cohort study; Level of evidence, 3. The ESPN NFL statistics archives were searched from the 2004 through 2014 regular seasons. During each season, data were collected on RBs with 150 to 250 carries (group A) and 300+ carries (group B). The following data were collected for each player and compared between groups: number of carries and mean yards per carry during the regular season of interest and the subsequent season, number of games missed due to injury during the season of interest and the subsequent season, and the specific injuries resulting in missed playing time during the subsequent season. Matched-pair t tests were used to compare changes within each group from one season to the next in terms of number of carries, mean yards per carry, and games missed due to injury. During the seasons studied, a total of 275 RBs were included (group A, 212; group B, 63). In group A, 140 RBs (66%) missed at least 1 game the subsequent season due to injury, compared with 31 RBs (49%) in group B ( P = .016). In fact, players in group B missed significantly fewer games due to injury during the season of interest ( P < .0001) as well as the subsequent season ( P < .01). Mean yards per carry was not significantly different between groups in the preceding season ( P = .073) or the subsequent season ( P = .24). NFL RBs with a high number of carries are not placed at greater risk of injury or worsened performance during the subsequent season. These RBs may be generally less injury prone compared with other NFL RBs.

A multi-component cognitive behavioural intervention for the treatment of fear of falling after hip fracture (FIT-HIP): protocol of a randomised controlled trial.

PubMed

Scheffers-Barnhoorn, Maaike N; van Haastregt, Jolanda C M; Schols, Jos M G A; Kempen, Gertrudis I J M; van Balen, Romke; Visschedijk, Jan H M; van den Hout, Wilbert B; Dumas, Eve M; Achterberg, Wilco P; van Eijk, Monica

2017-03-20

Hip fracture is a common injury in the geriatric population. Despite surgical repair and subsequent rehabilitation programmes, functional recovery is often limited, particularly in individuals with multi-morbidity. This leads to high care dependency and subsequent use of healthcare services. Fear of falling has a negative influence on recovery after hip fracture, due to avoidance of activity and subsequent restriction in mobility. Although fear of falling is highly prevalent after hip fracture, no structured treatment programme is currently available. This trial will evaluate whether targeted treatment of fear of falling in geriatric rehabilitation after hip fracture using a multi-component cognitive behavioural intervention (FIT-HIP), is feasible and (cost) effective in reducing fear of falling and associated activity restriction and thereby improves physical functioning. This multicentre cluster randomised controlled trial will be conducted among older patients with hip fracture and fear of falling who are admitted to a multidisciplinary inpatient geriatric rehabilitation programme in eleven post-acute geriatric rehabilitation units. Fifteen participants will be recruited from each site. Recruitment sites will be allocated by computer randomisation to either the control group, receiving usual care, or to the intervention group receiving the FIT-HIP intervention in addition to usual care. The FIT-HIP intervention is conducted by physiotherapists and will be embedded in usual care. It consists of various elements of cognitive behavioural therapy, including guided exposure to feared activities (that are avoided by the participants). Participants and outcome assessors are blinded to group allocation. Follow-up measurements will be performed at 3 and 6 months after discharge from geriatric rehabilitation. (Cost)-effectiveness and feasibility of the intervention will be evaluated. Primary outcome measures are fear of falling and mobility. Targeted treatment of fear of falling may improve recovery and physical and social functioning after hip fracture, thereby offering benefits for patients and reducing healthcare costs. Results of this study will provide insight into whether fear of falling is modifiable in the (geriatric) rehabilitation after hip fracture and whether the intervention is feasible. Netherlands Trial Register: NTR 5695 .

Designing a warm-up protocol for elite bob-skeleton athletes.

PubMed

Cook, Christian; Holdcroft, Danny; Drawer, Scott; Kilduff, Liam P

2013-03-01

To investigate how different warm-ups influenced subsequent sled-pull sprint performance in Olympic-level bob-skeleton athletes as part of their preparation for the 2010 Winter Olympics. Three female and 3 male athletes performed 5 different randomized warm-ups of differing intensities, durations, and timing relative to subsequent testing, each 2 days apart, all repeated twice. After warm-ups, testing on a sled-pull sprint over 20 m, 3 repeats 3 min apart, took place. Performance testing showed improvement (P < .001, ES > 1.2) with both increasing intensity of warm-up and closeness of completion to testing, with 20-m sled sprinting being 0.1-0.25 s faster in higher-intensity protocols performed near testing In addition, supplementing the warm-ups by wearing of a light survival coat resulted in further performance improvement (P = .000, ES 1.8). Changing timing and intensity of warm-up and using an ancillary passive heat-retention device improved sprint performance in Olympic-level bob-skeleton athletes. Subsequent adoption of these on the competitive circuit was associated with a seasonal improvement in push times and was ultimately implemented in the 2010 Winter Olympics.

Intraoperative culture positive allograft bone and subsequent postoperative infections: a retrospective review

PubMed Central

Sims, Laura; Kulyk, Paul; Woo, Allan

2017-01-01

Background Obtaining intraoperative cultures of allograft bone just before use in orthopedic procedures is standard practice in many centres; however, the association between positive cultures and subsequent surgical infections is unknown. Our study had 3 goals: to determine the prevalence of positive intraoperative allograft culture and subsequent infection; to determine if, in cases of subsequent infection, organisms isolated at reoperation were the same as those cultured from the allograft at the time of the index procedure; and to assess the costs associated with performing intraoperative allograft cultures. Methods In this retrospective case series, we obtained data on patients receiving allograft bone between 2009 and 2012. Patients receiving allograft with positive cultures were reviewed to identify cases of significant infection. Organisms isolated at reoperation were compared with the allograft culture taken at the time of implantation, and we performed a cost assessment. Results Of the 996 allograft bone grafts used, 43 (4.3%) had positive intraoperative cultures and significant postoperative infections developed in 2, requiring reoperation. Antibiotics based on culture results were prescribed in 24% of cases. Organisms cultured at the time of reoperation differed from those isolated initially. The cost of performing 996 allograft cultures was $169 320. Conclusion This series suggests that rates of positive intraoperative bone allograft culture are low, and subsequent infection is rare. In cases of postoperative infection, primary allograft culture and secondary tissue cultures isolated different organisms. Costs associated with performing cultures are high. Eliminating initial culture testing could save $42 500 per year in our health region. PMID:28234217

Clonal Integration Enhances the Performance of a Clonal Plant Species under Soil Alkalinity Stress

PubMed Central

Sun, Juanjuan; Chen, Jishan; Zhang, Yingjun

2015-01-01

Clonal plants have been shown to successfully survive in stressful environments, including salinity stress, drought and depleted nutrients through clonal integration between original and subsequent ramets. However, relatively little is known about whether clonal integration can enhance the performance of clonal plants under alkalinity stress. We investigated the effect of clonal integration on the performance of a typical rhizomatous clonal plant, Leymus chinensis, using a factorial experimental design with four levels of alkalinity and two levels of rhizome connection treatments, connected (allowing integration) and severed (preventing integration). Clonal integration was estimated by comparing physiological and biomass features between the rhizome-connected and rhizome-severed treatments. We found that rhizome-connected treatment increased the biomass, height and leaf water potential of subsequent ramets at highly alkalinity treatments but did not affect them at low alkalinity treatments. However, rhizome-connected treatment decreased the root biomass of subsequent ramets and did not influence the photosynthetic rates of subsequent ramets. The biomass of original ramets was reduced by rhizome-connected treatment at the highest alkalinity level. These results suggest that clonal integration can increase the performance of clonal plants under alkalinity stress. Rhizome-connected plants showed dramatically increased survival of buds with negative effects on root weight, indicating that clonal integration influenced the resource allocation pattern of clonal plants. A cost-benefit analysis based on biomass measures showed that original and subsequent ramets significantly benefited from clonal integration in highly alkalinity stress, indicating that clonal integration is an important adaptive strategy by which clonal plants could survive in local alkalinity soil. PMID:25790352

Post-exercise Ingestion of Carbohydrate, Protein and Water: A Systematic Review and Meta-analysis for Effects on Subsequent Athletic Performance.

PubMed

McCartney, Danielle; Desbrow, Ben; Irwin, Christopher

2018-02-01

Athletes may complete consecutive exercise sessions with limited recovery time between bouts (e.g. ≤ 4 h). Nutritional strategies that optimise post-exercise recovery in these situations are therefore important. This two-part review investigated the effect of consuming carbohydrate (CHO) and protein with water (W) following exercise on subsequent athletic (endurance/anaerobic exercise) performance. Studies were identified by searching the online databases SPORTDiscus, PubMed, Web of Science and Scopus. Investigations that measured endurance performance (≥ 5 min duration) ≤ 4 h after a standardised exercise bout (any type) under the following control vs. intervention conditions were included: Part 1: W vs. CHO ingested with an equal volume of W (CHO + W); and, Part 2: CHO + W vs. protein (PRO) ingested with CHO and an equal volume of W (PRO + CHO + W), where CHO or energy intake was matched. Publications were examined for bias using the Rosendal scale. Random-effects meta-analyses and meta-regression analyses were conducted to evaluate intervention efficacy. The quality assessment yielded a Rosendal score of 63 ± 9% (mean ± standard deviation). Part 1: 45 trials (n = 486) were reviewed. Ingesting CHO + W (102 ± 50 g CHO; 0.8 ± 0.6 g CHO kg -1  h -1 ) improved exercise performance compared with W (1.6 ± 0.7 L); % Δ mean power output = 4.0, 95% confidence interval 3.2-4.7 (I 2  = 43.9). Improvement was attenuated when participants were 'Fed' (a meal 2-4 h prior to the initial bout) as opposed to 'Fasted' (p = 0.012). Part 2: 13 trials (n = 125) were reviewed. Ingesting PRO + CHO + W (35 ± 26 g PRO; 0.5 ± 0.4 g PRO kg -1 ) did not affect exercise performance compared with CHO + W (115 ± 61 g CHO; 0.6 ± 0.3 g CHO·kg body mass -1  h -1 ; 1.2 ± 0.6 L); % Δ mean power output = 0.5, 95% confidence interval - 0.5 to 1.6 (I 2  = 72.9). Athletes with limited time for recovery between consecutive exercise sessions should prioritise CHO and fluid ingestion to enhance subsequent athletic performance. PROSPERO REGISTRATION NUMBER: CRD42016046807.

Laparoscopic skills suffer on the first shift of sequential night shifts: program directors beware and residents prepare.

PubMed

Leff, Daniel R; Aggarwal, Rajesh; Rana, Mariam; Nakhjavani, Batool; Purkayastha, Sanjay; Khullar, Vik; Darzi, Ara W

2008-03-01

Research evaluating fatigue-induced skills decline has focused on acute sleep deprivation rather than the effects of circadian desynchronization associated with multiple shifts. As a result, the number of consecutive night shifts that residents can safely be on duty without detrimental effects to their technical skills remains unknown. A prospective observational cohort study was conducted to assess the impact of 7 successive night shifts on the technical surgical performance of junior residents. The interventional strategy included training 21 residents from surgery and allied disciplines on a virtual reality surgical simulator, towards the achievement of preset benchmark scores, followed by 294 technical skills assessments conducted over 1764 manpower night shift hours. Primary outcomes comprised serial technical skills assessments on 2 tasks of a virtual reality surgical simulator. Secondary outcomes included assessments of introspective fatigue, duration of sleep, and prospective recordings of activity (number of "calls" received, steps walked, and patients evaluated). Maximal deterioration in performance was observed following the first night shift. Residents took significantly longer to complete the first (P = 0.002) and second tasks (P = 0.005) compared with baseline. They also committed significantly greater numbers of errors (P = 0.025) on the first task assessed. Improved performance was observed across subsequent shifts towards baseline levels. Newly acquired technical surgical skills deteriorate maximally after the first night shift, emphasizing the importance of adequate preparation for night rotas. Performance improvements across successive shifts may be due to ongoing learning or adaptation to chronic fatigue. Further research should focus on assessments of both technical procedural skills and cognitive abilities to determine the rotas that best minimize errors and maximize patient safety.

The Effects of Heat Adaptation on Physiology, Perception and Exercise Performance in the Heat: A Meta-Analysis.

PubMed

Tyler, Christopher J; Reeve, Tom; Hodges, Gary J; Cheung, Stephen S

2016-11-01

Exercise performance and capacity are impaired in hot, compared to temperate, conditions. Heat adaptation (HA) is one intervention commonly adopted to reduce this impairment because it may induce beneficial exercise performance and physiological and perceptual adaptations. A number of investigations have been conducted on HA but, due to large methodological differences, the effectiveness of different HA regimens remain unclear. (1) To quantify the effect of different HA regimens on exercise performance and the physiological and perceptual responses to subsequent heat exposure. (2) To offer practical HA recommendations and suggestions for future HA research based upon a systematic and quantitative synthesis of the literature. PubMed was searched for original research articles published up to, and including, 16 February 2016 using appropriate first- and second-order search terms. English-language, peer-reviewed, full-text original articles using human participants were reviewed using the four-stage process identified in the PRISMA statement. Data for the following variables were obtained from the manuscripts by at least two of the authors: participant sex, maximal oxygen consumption and age; HA duration, frequency, modality, temperature and humidity; exercise performance and capacity; core and skin temperature; heart rate, stroke volume, cardiac output, skin blood flow, sweat onset temperature, body mass loss, sweat rate, perception of thirst, volitional fluid consumption, plasma volume changes; sweat concentrations of sodium, chloride and potassium; aldosterone, arginine vasopressin, heat shock proteins (Hsp), ratings of perceived exertion (RPE) and thermal sensation. Data were divided into three groups based upon the frequency of the HA regimen. Performance and capacity data were also divided into groups based upon the type of HA used. Hedges' g effect sizes and 95 % confidence intervals were calculated. Correlations were run where appropriate. Ninety-six articles were reviewed. The most common duration was 7-14 days and the most common method of HA was the controlled work-rate approach. HA had a moderately beneficial effect on exercise capacity and performance in the heat irrespective of regimen; however, longer regimens were more effective than shorter approaches. HA had a moderate-to-large beneficial effect on lowering core body temperature before and during exercise, maintaining cardiovascular stability, and improving heat-loss pathways. Data are limited but HA may reduce oxygen consumption during subsequent exercise, improve glycogen sparing, increase the power output at lactate threshold, reduce lactate concentrations during exercise, have a trivial effect on increasing extracellular concentrations of Hsp, and improve perceived ratings of exertion and thermal sensation. HA regimens lasting <14 days induce many beneficial physiological and perceptual adaptations to high ambient temperatures, and improve subsequent exercise performance and capacity in the heat; however, the extent of the adaptations is greatest when HA regimens lasting longer than 14 days are adopted. Large methodological differences in the HA literature mean that there is still uncertainty regarding the magnitude and time course of potential adaptation for a number of physiological and perceptual variables.

The electronic and optical properties of amorphous silica with hydrogen defects by ab initio calculations

NASA Astrophysics Data System (ADS)

Ren, Dahua; Xiang, Baoyan; Hu, Cheng; Qian, Kai; Cheng, Xinlu

2018-04-01

Hydrogen can be trapped in the bulk materials in four forms: interstitial molecular H2, interstitial atom H, O‑H+(2Si=O–H)+, Si‑H‑( {{4O}}\\bar \\equiv {{Si&x2212H}})‑ to affect the electronic and optical properties of amorphous silica. Therefore, the electronic and optical properties of defect-free and hydrogen defects in amorphous silica were performed within the scheme of density functional theory. Initially, the negative charged states hydrogen defects introduced new defect level between the valence band top and conduction band bottom. However, the neutral and positive charged state hydrogen defects made both the valence band and conduction band transfer to the lower energy. Subsequently, the optical properties such as absorption spectra, conductivity and loss functions were analyzed. It is indicated that the negative hydrogen defects caused the absorption peak ranging from 0 to 2.0 eV while the positive states produced absorption peaks at lower energy and two strong absorption peaks arose at 6.9 and 9.0 eV. However, the neutral hydrogen defects just improved the intensity of absorption spectrum. This may give insights into understanding the mechanism of laser-induced damage for optical materials. Project supported by the Science and Technology of Hubei Provincial Department of Education (No. B2017098).

SEQUOIA: significance enhanced network querying through context-sensitive random walk and minimization of network conductance.

PubMed

Jeong, Hyundoo; Yoon, Byung-Jun

2017-03-14

Network querying algorithms provide computational means to identify conserved network modules in large-scale biological networks that are similar to known functional modules, such as pathways or molecular complexes. Two main challenges for network querying algorithms are the high computational complexity of detecting potential isomorphism between the query and the target graphs and ensuring the biological significance of the query results. In this paper, we propose SEQUOIA, a novel network querying algorithm that effectively addresses these issues by utilizing a context-sensitive random walk (CSRW) model for network comparison and minimizing the network conductance of potential matches in the target network. The CSRW model, inspired by the pair hidden Markov model (pair-HMM) that has been widely used for sequence comparison and alignment, can accurately assess the node-to-node correspondence between different graphs by accounting for node insertions and deletions. The proposed algorithm identifies high-scoring network regions based on the CSRW scores, which are subsequently extended by maximally reducing the network conductance of the identified subnetworks. Performance assessment based on real PPI networks and known molecular complexes show that SEQUOIA outperforms existing methods and clearly enhances the biological significance of the query results. The source code and datasets can be downloaded from http://www.ece.tamu.edu/~bjyoon/SEQUOIA .

High-Performance Screen-Printed Thermoelectric Films on Fabrics

DOE PAGES

Shin, Sunmi; Kumar, Rajan; Roh, Jong Wook; ...

2017-08-04

Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screenprinting of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi 0.5Sb 1.5Te 3 or n-type Bi 2Te 2.7Se 0.3), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscositymore » for printability at a very small concentration (0.45–0.60 wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively.« less

High-Performance Screen-Printed Thermoelectric Films on Fabrics.

PubMed

Shin, Sunmi; Kumar, Rajan; Roh, Jong Wook; Ko, Dong-Su; Kim, Hyun-Sik; Kim, Sang Il; Yin, Lu; Schlossberg, Sarah M; Cui, Shuang; You, Jung-Min; Kwon, Soonshin; Zheng, Jianlin; Wang, Joseph; Chen, Renkun

2017-08-04

Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screen-printing of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi 0.5 Sb 1.5 Te 3 or n-type Bi 2 Te 2.7 Se 0.3 ), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscosity for printability at a very small concentration (0.45-0.60 wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively.

Sensory aspects of drinking water in contact with epoxy lined copper pipe.

PubMed

Heim, T H; Dietrich, A M

2007-01-01

Pipe relining via in situ epoxy lining is used to remediate corroded plumbing or distribution systems. This investigation examined the effects on odour, TOC, THM formation and disinfectant demand in water exposed to epoxy-lined copper pipes used for home plumbing. The study was conducted in accordance with the Utility Quick Test, a migration/leaching method for utilities to conduct sensory analysis of materials in contact with drinking water. The test was performed using water with no disinfectant and levels of chlorine and monochloramines representative of those found in the distribution system. Panelists repeatedly and consistently described a "plastic/adhesive/putty" odour in the water from the pipes. The odour intensity remained relatively constant for each of two subsequent flushes. Water samples stored in the epoxy-lined pipes showed a significant increase in the leaching of organic compounds (as TOC), and this TOC was demonstrated to react with free chlorine to form trichloromethane. Water stored in the pipes also showed a marked increase in disinfectant demand relative to the water stored in glass control flasks. A study conducted at a full scale installation at an apartment demonstrated that after installation and regular use, the epoxy lining did not yield detectable differences in water quality.

Electrophoretic deposition of thermites onto micro-engineered electrodes prepared by direct-ink writing.

PubMed

Sullivan, K T; Zhu, C; Tanaka, D J; Kuntz, J D; Duoss, E B; Gash, A E

2013-02-14

This work combines electrophoretic deposition (EPD) with direct-ink writing (DIW) to prepare thin films of Al/CuO thermites onto patterned two- and three-dimensional silver electrodes. DIW was used to write the electrodes using a silver nanoparticle ink, and EPD was performed in a subsequent step to deposit the thermite onto the conductive electrodes. Unlike conventional lithographic techniques, DIW is a low-cost and versatile alternative to print fine-featured electrodes, and adds the benefit of printing self-supported three-dimensional structures. EPD provides a method for depositing the composite thermite only onto the conductive electrodes, and with controlled thicknesses, which provides fine spatial and mass control, respectively. EPD has previously been shown to produce well-mixed thermite composites which can pack to reasonably high densities without the need for any postprocessing. Homogeneous mixing is particularly important in reactive composities, where good mixing can enhance the reaction kinetics by decreasing the transport distance between the components. Several two- and three-dimensional designs were investigated to highlight the versatility of using DIW and EPD together. In addition to energetic applications, we anticipate that this combination of techniques will have a variety of other applications, which would benefit from the controlled placement of a thin film of one material onto a conductive architecture of a second material.

High-Performance Screen-Printed Thermoelectric Films on Fabrics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shin, Sunmi; Kumar, Rajan; Roh, Jong Wook

Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screenprinting of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi 0.5Sb 1.5Te 3 or n-type Bi 2Te 2.7Se 0.3), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscositymore » for printability at a very small concentration (0.45–0.60 wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively.« less

Growth of InSb and InI Crystals on Earth and in Microgravity

NASA Technical Reports Server (NTRS)

Ostrogorsky, A. G.; Churilov, A.; Volz, M. P.; Riabov, V.; Van den Berg, L.

2015-01-01

During the past 40 years, dozens of semiconductor crystal growth experiments have been conducted in space laboratories. The subsequent analysis of the space-grown crystals revealed (i) that weak convection existed in virtually all melt-growth experiments, (ii) de-wetting significantly reduced the level of stress-induced defects, and (iii) particularly encouraging results were obtained in vapor-growth experiments. In 2002, following a decade of ground based research in growing doped Ge and GaSb crystals, a series of crystal growth experiments was performed at the ISS, within the SUBSA (Solidification Using a Baffle in Sealed Ampoules) investigation. Te- and Zn-doped InSb crystals were grown from the melt. The specially designed furnace provided a side-view of the melt and precise seeding measurement of the growth rate. At present, under sponsorship of CASIS (Center for the Advancement of Science in Space, www.iss-casis.org), we are conducting ground-based experiments with indium mono-iodide (InI) in preparation for the "SUBSA II" ISS investigation, planned for 2017. The experiments include: i) Horizontal Bridgman (HB) growth and ii) Vapor Transport (VT) growth. Finite element modeling will also be conducted, to optimize the design of the flight ampoules, for vapor and melt growth.

When psychopathology matters most: identifying sensitive periods when within-person changes in conduct, affective, and anxiety problems are associated with male adolescent substance use

PubMed Central

Cerdá, Magdalena; Prins, Seth J.; Galea, Sandro; Howe, Chanelle J.; Pardini, Dustin

2016-01-01

Background and aims There is a documented link between common psychiatric disorders and substance use in adolescent males. This study addressed two key questions: 1) Is there a within-person association between an increase in psychiatric problems and an increase in substance use among adolescent males?; and 2) Are there sensitive periods during male adolescence when such associations are more evident? Design Analysis of longitudinal data collected annually on boys randomly selected from schools based on a comprehensive public school enrollment list from the Pittsburgh Board of Education Setting Recruitment occurred in public schools in Pittsburgh, Pennysylvania, USA. Participants 503 boys assessed at ages 13-19, average cooperation rate = 92.1% Measurements DSM-oriented affective, anxiety, and conduct disorder problems were measured with items from the caregiver, teacher, and youth version of the Achenbach scales. Scales were converted to T-scores using age- and gender-based national norms and combined by taking the average across informants. Alcohol and marijuana use were assessed semi-annually by a 16-item Substance Use Scale adapted from the National Youth Survey. Findings When male adolescents experienced a one-unit increase in their conduct problems T-score, their rate of marijuana use subsequently increased by 1.03 (95% confidence interval (CI): 1.01, 1.05), and alcohol quantity increased by 1.01 (95% CI: 1.0002, 1.02). When adolescents experienced a one-unit increase in their average quantity of alcohol use, their anxiety problems T-score subsequently increased by 0.12 (95% CI: 0.05, 0.19). These associations were strongest in early and late adolescence. Conclusions When adolescent boys experience an increase in conduct disorder problems, they are more likely to exhibit a subsequent escalation in substance use. As adolescent boys increase their intensity of alcohol use, they become more likely to develop subsequent anxiety problems. Developmental turning points such as early and late adolescence appear to be particularly sensitive periods for boys to develop comorbid patterns of psychiatric problems and substance use. PMID:26748766

When psychopathology matters most: identifying sensitive periods when within-person changes in conduct, affective and anxiety problems are associated with male adolescent substance use.

PubMed

Cerdá, Magdalena; Prins, Seth J; Galea, Sandro; Howe, Chanelle J; Pardini, Dustin

2016-05-01

There is a documented link between common psychiatric disorders and substance use in adolescent males. This study addressed two key questions: (1) is there a within-person association between an increase in psychiatric problems and an increase in substance use among adolescent males and (2) are there sensitive periods during male adolescence when such associations are more evident? Analysis of longitudinal data collected annually on boys selected randomly from schools based on a comprehensive public school enrollment list from the Pittsburgh Board of Education. Recruitment occurred in public schools in Pittsburgh, Pennsylvania, USA. A total of 503 boys assessed at ages 13-19 years, average cooperation rate = 92.1%. Diagnostic and Statistical Manual (DSM)-oriented affective, anxiety and conduct disorder problems were measured with items from the caregiver, teacher and youth version of the Achenbach scales. Scales were converted to t-scores using age- and gender-based national norms and combined by taking the average across informants. Alcohol and marijuana use were assessed semi-annually by a 16-item Substance Use Scale adapted from the National Youth Survey. When male adolescents experienced a 1-unit increase in their conduct problems t-score, their rate of marijuana use subsequently increased by 1.03 [95% confidence interval (CI) = 1.01, 1.05], and alcohol quantity increased by 1.01 (95% CI = 1.0002, 1.02). When adolescents experienced a 1-unit increase in their average quantity of alcohol use, their anxiety problems t-score subsequently increased by 0.12 (95% CI = 0.05, 0.19). These associations were strongest in early and late adolescence. When adolescent boys experience an increase in conduct disorder problems, they are more likely to exhibit a subsequent escalation in substance use. As adolescent boys increase their intensity of alcohol use, they become more likely to develop subsequent anxiety problems. Developmental turning points such as early and late adolescence appear to be particularly sensitive periods for boys to develop comorbid patterns of psychiatric problems and substance use. © 2016 Society for the Study of Addiction.

The Influence of Soil Moisture, Coastline Curvature, and Land-Breeze Circulations on Sea-Breeze Initiated Precipitation

NASA Technical Reports Server (NTRS)

Baker, David R.; Lynn, Barry H.; Boone, Aaron; Tao, Wei-Kuo; Simpson, Joanne

2000-01-01

Idealized numerical simulations are performed with a coupled atmosphere/land-surface model to identify the roles of initial soil moisture, coastline curvature, and land breeze circulations on sea breeze initiated precipitation. Data collected on 27 July 1991 during the Convection and Precipitation Electrification Experiment (CAPE) in central Florida are used. The 3D Goddard Cumulus Ensemble (GCE) cloud resolving model is coupled with the Goddard Parameterization for Land-Atmosphere-Cloud Exchange (PLACE) land surface model, thus providing a tool to simulate more realistically land-surface/atmosphere interaction and convective initiation. Eight simulations are conducted with either straight or curved coast-lines, initially homogeneous soil moisture or initially variable soil moisture, and initially homogeneous horizontal winds or initially variable horizontal winds (land breezes). All model simulations capture the diurnal evolution and general distribution of sea-breeze initiated precipitation over central Florida. The distribution of initial soil moisture influences the timing, intensity and location of subsequent precipitation. Soil moisture acts as a moisture source for the atmosphere, increases the connectively available potential energy, and thus preferentially focuses heavy precipitation over existing wet soil. Strong soil moisture-induced mesoscale circulations are not evident in these simulations. Coastline curvature has a major impact on the timing and location of precipitation. Earlier low-level convergence occurs inland of convex coastlines, and subsequent precipitation occurs earlier in simulations with curved coastlines. The presence of initial land breezes alone has little impact on subsequent precipitation. however, simulations with both coastline curvature and initial land breezes produce significantly larger peak rain rates due to nonlinear interactions.

Self-rated health is associated with subsequent functional decline among older adults in Japan.

PubMed

Hirosaki, Mayumi; Okumiya, Kiyohito; Wada, Taizo; Ishine, Masayuki; Sakamoto, Ryota; Ishimoto, Yasuko; Kasahara, Yoriko; Kimura, Yumi; Fukutomi, Eriko; Chen, Wen Ling; Nakatsuka, Masahiro; Fujisawa, Michiko; Otsuka, Kuniaki; Matsubayashi, Kozo

2017-09-01

Previous studies have reported that self-rated health (SRH) predicts subsequent mortality. However, less is known about the association between SRH and functional ability. The aim of this study was to examine whether SRH predicts decline in basic activities of daily living (ADL), even after adjustment for depression, among community-dwelling older adults in Japan. A three-year prospective cohort study was conducted among 654 residents aged 65 years and older without disability in performing basic ADL at baseline. SRH was assessed using a visual analogue scale (range; 0-100), and dichotomized into low and high groups. Information on functional ability, sociodemographic factors, depressive symptoms, and medical conditions were obtained using a self-administered questionnaire. Logistic regression analysis was used to examine the association between baseline SRH and functional decline three years later. One hundred and eight (16.5%) participants reported a decline in basic ADL at the three-year follow-up. Multiple logistic regression analysis showed that the low SRH group had a higher risk for functional decline compared to the high SRH group, even after controlling for potential confounding factors (odds ratio (OR) = 2.4; 95% confidence interval (CI) = 1.3-4.4). Furthermore, a 10-point difference in SRH score was associated with subsequent functional decline (OR = 1.37; 95% CI = 1.16-1.61). SRH was an independent predictor of functional decline. SRH could be a simple assessment tool for predicting the loss or maintenance of functional ability in community-dwelling older adults. Positive self-evaluation might be useful to maintain an active lifestyle and stay healthy.

Catatonic Stupor in Schizophrenic Disorders and Subsequent Medical Complications and Mortality.

PubMed

Funayama, Michitaka; Takata, Taketo; Koreki, Akihiro; Ogino, Satoyuki; Mimura, Masaru

2018-05-01

Although catatonia can occur secondary to a general medical condition, catatonia itself has been known to lead to various medical compolications. Although case reports on the association of catatonia with subsequent medical complications have been documented, no comprehensive large-scale study has been performed. To investigate specific medical complications after catatonia, we conducted a retrospective cohort study of specific medical complications of schizophrenia patients with catatonia. The 1719 schizophrenia inpatients in our study were categorized into two groups: the catatonia group, i.e., those who exhibited catatonic stupor while they were hospitalized, and the noncatatonia group, i.e., those who never exhibited catatonic stupor. Differences between the two groups in the occurrence of subsequent medical complications were examined using linear and logistic regression analyses, and models were adjusted for potentially confounding factors. The catatonia group had an increased risk for mortality (odds ratio = 4.8, 95% confidence interval = 2.0-10.6, p < .01) and certain specific medical complications, i.e., pneumonia, urinary tract infection, sepsis, disseminated intravascular coagulation, rhabdomyolysis, dehydration, deep venous thrombosis, pulmonary embolism, urinary retention, decubitus, arrhythmia, renal failure, neuroleptic malignant syndrome, hypernatremia, and liver dysfunction (all p values < .01, except for deep venous thrombosis, p = .04 in the multiple linear regression analysis). Catatonic stupor in schizophrenia substantially raises the risk for specific medical complications and mortality. Hyperactivity of the sympathetic nervous system, dehydration, and immobility, which are frequently involved in catatonia, might contribute to these specific medical complications. In catatonia, meticulous care for both mental and medical conditions should be taken to reduce the risk of adverse medical consequences.

Evaluating the role of phase I expansion cohorts in oncologic drug development.

PubMed

Norris, Robin E; Behtaj, Mohadese; Fu, Pingfu; Dowlati, Afshin

2017-02-01

Importance Use of expansion cohorts (EC) in phase I trials is increasing. However, the utility of phase I EC in aiding drug development is unclear. We sought to determine factors associated with the inclusion of EC in phase I studies and the impact of EC on subsequent clinical development. Methods We performed a systematic review of all phase I trials published in the Journal of Clinical Oncology between June 2004 and May 2014. Presence of an EC, number of participants, funding source, class of agent, tumor type, and maximum tolerated dose (MTD)/recommended phase 2 dose (RP2D) were identified. Subsequent conduct of phase II studies and FDA approval of the study agent was also assessed. Results We identified 252 phase I studies. An EC was included in 105 studies. Average accrual on EC studies was 47 compared to 31 in studies without EC (p < 0.0001). There was no impact of time on the inclusion of EC. Only 4 % of phase I studies with an EC provided sample size justification. Source of funding had the only significant association with inclusion of EC. Addition of a phase I EC did not impact the phase I MTD/RP2D, subsequent phase II trial, or FDA approval. Conclusion The importance of including an EC in phase I trials is subject to ongoing debate. Our results demonstrated little benefit to including EC in phase I studies. These findings support that innovative design strategies are needed to optimize the utility of EC in phase I studies.

Prolonged experimental drought reduces plant hydraulic conductance and transpiration and increases mortality in a piñon-juniper woodland.

PubMed

Pangle, Robert E; Limousin, Jean-Marc; Plaut, Jennifer A; Yepez, Enrico A; Hudson, Patrick J; Boutz, Amanda L; Gehres, Nathan; Pockman, William T; McDowell, Nate G

2015-04-01

Plant hydraulic conductance (k s) is a critical control on whole-plant water use and carbon uptake and, during drought, influences whether plants survive or die. To assess long-term physiological and hydraulic responses of mature trees to water availability, we manipulated ecosystem-scale water availability from 2007 to 2013 in a piñon pine (Pinus edulis) and juniper (Juniperus monosperma) woodland. We examined the relationship between k s and subsequent mortality using more than 5 years of physiological observations, and the subsequent impact of reduced hydraulic function and mortality on total woody canopy transpiration (E C) and conductance (G C). For both species, we observed significant reductions in plant transpiration (E) and k s under experimentally imposed drought. Conversely, supplemental water additions increased E and k s in both species. Interestingly, both species exhibited similar declines in k s under the imposed drought conditions, despite their differing stomatal responses and mortality patterns during drought. Reduced whole-plant k s also reduced carbon assimilation in both species, as leaf-level stomatal conductance (g s) and net photosynthesis (A n) declined strongly with decreasing k s. Finally, we observed that chronically low whole-plant k s was associated with greater canopy dieback and mortality for both piñon and juniper and that subsequent reductions in woody canopy biomass due to mortality had a significant impact on both daily and annual canopy E C and G C. Our data indicate that significant reductions in k s precede drought-related tree mortality events in this system, and the consequence is a significant reduction in canopy gas exchange and carbon fixation. Our results suggest that reductions in productivity and woody plant cover in piñon-juniper woodlands can be expected due to reduced plant hydraulic conductance and increased mortality of both piñon pine and juniper under anticipated future conditions of more frequent and persistent regional drought in the southwestern United States.

Prolonged experimental drought reduces plant hydraulic conductance and transpiration and increases mortality in a piñon–juniper woodland

PubMed Central

Pangle, Robert E; Limousin, Jean-Marc; Plaut, Jennifer A; Yepez, Enrico A; Hudson, Patrick J; Boutz, Amanda L; Gehres, Nathan; Pockman, William T; McDowell, Nate G

2015-01-01

Plant hydraulic conductance (ks) is a critical control on whole-plant water use and carbon uptake and, during drought, influences whether plants survive or die. To assess long-term physiological and hydraulic responses of mature trees to water availability, we manipulated ecosystem-scale water availability from 2007 to 2013 in a piñon pine (Pinus edulis) and juniper (Juniperus monosperma) woodland. We examined the relationship between ks and subsequent mortality using more than 5 years of physiological observations, and the subsequent impact of reduced hydraulic function and mortality on total woody canopy transpiration (EC) and conductance (GC). For both species, we observed significant reductions in plant transpiration (E) and ks under experimentally imposed drought. Conversely, supplemental water additions increased E and ks in both species. Interestingly, both species exhibited similar declines in ks under the imposed drought conditions, despite their differing stomatal responses and mortality patterns during drought. Reduced whole-plant ks also reduced carbon assimilation in both species, as leaf-level stomatal conductance (gs) and net photosynthesis (An) declined strongly with decreasing ks. Finally, we observed that chronically low whole-plant ks was associated with greater canopy dieback and mortality for both piñon and juniper and that subsequent reductions in woody canopy biomass due to mortality had a significant impact on both daily and annual canopy EC and GC. Our data indicate that significant reductions in ks precede drought-related tree mortality events in this system, and the consequence is a significant reduction in canopy gas exchange and carbon fixation. Our results suggest that reductions in productivity and woody plant cover in piñon–juniper woodlands can be expected due to reduced plant hydraulic conductance and increased mortality of both piñon pine and juniper under anticipated future conditions of more frequent and persistent regional drought in the southwestern United States. PMID:25937906

Evolution of Reduced Graphene Oxide-SnS2 Hybrid Nanoparticle Electrodes in Li-Ion Batteries.

PubMed

Modarres, Mohammad H; Lim, Jonathan Hua-Wei; George, Chandramohan; De Volder, Michael

2017-06-22

Hybrid nanomaterials where active battery nanoparticles are synthesized directly onto conductive additives such as graphene hold the promise of improving the cyclability and energy density of conversion and alloying type Li-ion battery electrodes. Here we investigate the evolution of hybrid reduced graphene oxide-tin sulfide (rGO-SnS 2 ) electrodes during battery cycling. These hybrid nanoparticles are synthesized by a one-step solvothermal microwave reaction which allows for simultaneous synthesis of the SnS 2 nanocrystals and reduction of GO. Despite the hybrid architecture of these electrodes, electrochemical impedance spectroscopy shows that the impedance doubles in about 25 cycles and subsequently gradually increases, which may be caused by an irreversible surface passivation of rGO by sulfur enriched conversion products. This surface passivation is further confirmed by post-mortem Raman spectroscopy of the electrodes, which no longer detects rGO peaks after 100 cycles. Moreover, galvanostatic intermittent titration analysis during the 1st and 100th cycles shows a drop in Li-ion diffusion coefficient of over an order of magnitude. Despite reports of excellent cycling performance of hybrid nanomaterials, our work indicates that in certain electrode systems, it is still critical to further address passivation and charge transport issues between the active phase and the conductive additive in order to retain high energy density and cycling performance.

Evolution of Reduced Graphene Oxide–SnS2 Hybrid Nanoparticle Electrodes in Li-Ion Batteries

PubMed Central

2017-01-01

Hybrid nanomaterials where active battery nanoparticles are synthesized directly onto conductive additives such as graphene hold the promise of improving the cyclability and energy density of conversion and alloying type Li-ion battery electrodes. Here we investigate the evolution of hybrid reduced graphene oxide–tin sulfide (rGO-SnS2) electrodes during battery cycling. These hybrid nanoparticles are synthesized by a one-step solvothermal microwave reaction which allows for simultaneous synthesis of the SnS2 nanocrystals and reduction of GO. Despite the hybrid architecture of these electrodes, electrochemical impedance spectroscopy shows that the impedance doubles in about 25 cycles and subsequently gradually increases, which may be caused by an irreversible surface passivation of rGO by sulfur enriched conversion products. This surface passivation is further confirmed by post-mortem Raman spectroscopy of the electrodes, which no longer detects rGO peaks after 100 cycles. Moreover, galvanostatic intermittent titration analysis during the 1st and 100th cycles shows a drop in Li-ion diffusion coefficient of over an order of magnitude. Despite reports of excellent cycling performance of hybrid nanomaterials, our work indicates that in certain electrode systems, it is still critical to further address passivation and charge transport issues between the active phase and the conductive additive in order to retain high energy density and cycling performance. PMID:28804530

Neutron Activation and Thermoluminescent Detector Responses to a Bare Pulse of the CEA Valduc SILENE Critical Assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Thomas Martin; Celik, Cihangir; McMahan, Kimberly L.

This benchmark experiment was conducted as a joint venture between the US Department of Energy (DOE) and the French Commissariat à l'Energie Atomique (CEA). Staff at the Oak Ridge National Laboratory (ORNL) in the US and the Centre de Valduc in France planned this experiment. The experiment was conducted on October 11, 2010 in the SILENE critical assembly facility at Valduc. Several other organizations contributed to this experiment and the subsequent evaluation, including CEA Saclay, Lawrence Livermore National Laboratory (LLNL), the Y-12 National Security Complex (NSC), Babcock International Group in the United Kingdom, and Los Alamos National Laboratory (LANL). Themore » goal of this experiment was to measure neutron activation and thermoluminescent dosimeter (TLD) doses from a source similar to a fissile solution critical excursion. The resulting benchmark can be used for validation of computer codes and nuclear data libraries as required when performing analysis of criticality accident alarm systems (CAASs). A secondary goal of this experiment was to qualitatively test performance of two CAAS detectors similar to those currently and formerly in use in some US DOE facilities. The detectors tested were the CIDAS MkX and the Rocky Flats NCD-91. These detectors were being evaluated to determine whether they would alarm, so they were not expected to generate benchmark quality data.« less

A longitudinal study of childhood obesity, weight status change, and subsequent academic performance in Taiwanese children.

PubMed

Chen, Li-Jung; Fox, Kenneth R; Ku, Po-Wen; Wang, Ching-Hui

2012-09-01

This study examined the association among childhood obesity, weight status change, and subsequent academic performance at 6-year follow-up. First-grade students from one elementary school district in Taichung City, Taiwan were followed for 6 years (N = 409). Academic performance was extracted from the school records at the end of each grade. Weight and height were measured at the beginning of each grade. A weight change variable was created based on each child's weight status difference at grades 1 and 6. A multivariate linear regression model for predicting academic performance at grade 6 was developed with adjustment for individual characteristics and family factors. A latent growth curve (LGC) showed the association between changes in body mass index (BMI) and in academic performance across a 6-year period. BMI in children increased significantly across 6 years. The rate of increase in BMI over 6 years was higher for children with higher baseline BMIs than it was for children with lower baseline BMIs. However, BMI changes were not significantly associated with changes of academic performance. There was no significant relationship between initial obesity or change in weight status and subsequent academic performance. It appears that either being or becoming overweight/obese did not impact academic achievement for these Taiwanese children. © 2012, American School Health Association.

Prior Acute Mental Exertion in Exercise and Sport

PubMed Central

Silva-Júnior, Fernando Lopes e; Emanuel, Patrick; Sousa, Jordan; Silva, Matheus; Teixeira, Silmar; Pires, Flávio Oliveira; Machado, Sérgio; Arias-Carrion, Oscar

2016-01-01

Introduction: Mental exertion is a psychophysiological state caused by sustained and prolonged cognitive activity. The understanding of the possible effects of acute mental exertion on physical performance, and their physiological and psychological responses are of great importance for the performance of different occupations, such as military, construction workers, athletes (professional or recreational) or simply practicing regular exercise, since these occupations often combine physical and mental tasks while performing their activities. However, the effects of implementation of a cognitive task on responses to aerobic exercise and sports are poorly understood. Our narrative review aims to provide information on the current research related to the effects of prior acute mental fatigue on physical performance and their physiological and psychological responses associated with exercise and sports. Methods: The literature search was conducted using the databases PubMed, ISI Web of Knowledge and PsycInfo using the following terms and their combinations: “mental exertion”, “mental fatigue”, “mental fatigue and performance”, “mental exertion and sports” “mental exertion and exercise”. Results: We concluded that prior acute mental exertion affects effectively the physiological and psychophysiological responses during the cognitive task, and performance in exercise. Conclusion: Additional studies involving prior acute mental exertion, exercise/sports and physical performance still need to be carried out in order to analyze the physiological, psychophysiological and neurophysiological responses subsequently to acute mental exertion in order to identify cardiovascular factors, psychological, neuropsychological associates. PMID:27867415