The Impact of Within-School Autonomy on Students' Goal Orientations and Engagement with Mathematics

ERIC Educational Resources Information Center

Carmichael, Colin; Muir, Tracey; Callingham, Rosemary

2017-01-01

School autonomy has been identified as having an impact on a school's performance, yet less has been reported about the effect this has on students' goal orientations and engagement with mathematics. In a national study conducted in schools across Australia, measures of school autonomy were collected from teachers and school leaders, along with…

Assessment of orientation practices for ethics consultation at Harvard Medical School-affiliated hospitals.

PubMed

Zaidi, Danish; Kesselheim, Jennifer C

2018-02-01

Few studies have been conducted to assess the quality of orientation practices for ethics advisory committees that conduct ethics consultation. This survey study focused on several Harvard teaching hospitals, exploring orientation quality and committee members' self-evaluation in the American Society of Bioethics and Humanities (ASBH) ethics consultation competencies. We conducted a survey study that involved 116 members and 16 chairs of ethics advisory committees, respectively (52% and 62.5% response rates). Predictor variables included professional demographics, duration on committees and level of training. Outcome variables included familiarity with and preparedness in the ASBH competencies and satisfaction with orientations. We hypothesised that responses would be associated with both the aforementioned predictors and whether or not participants had encountered the ASBH competencies in training. A majority of respondents found their orientation curricula to be helpful (62%), although a significant portion of respondents did not receive any orientation (24%) or were unsatisfied with their orientation (14%). Familiarity with ASBH competencies was a statistically significant predictor of respondents' self-evaluation in particular categories (54% had heard of the competencies). Standard educational materials were reported as offered during orientation, such as readings (50%) and case studies (41%); different medium resources were less evidenced such as videos on ethics consultation (19%). Institutions should re-evaluate orientation practices for ethics committee members that perform ethics consultation. Integrating ASBH competencies and useful methods into a resourceful pedagogy will help improve both member satisfaction with orientation and preparation in consultation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Effect of cladding systems on moisture performance of wood-framed walls in a mixed-humid climate

Treesearch

S. Craig Drumheller; Charles G. Carll

2010-01-01

A 22-month field investigation of nine different north-and south-oriented wood-framed wall assemblies was conducted to determine the moisture performance of various wall construction types, most of which incorporated absorptive cladding. The study was conducted on the campus of the National Association of Home Builders (NAHB) Research Center, in Upper Marlboro, MD, 20...

Self-Paced Instruction in a Cognitively Oriented Skills Course: Supplyman, MOS 76Y10. Technical Report No. 75-20.

ERIC Educational Resources Information Center

Hungerland, Jacklyn E.; Taylor, John E.

As part of the Army's adoption of performance-oriented instruction in Army Training centers, a study was conducted to determine the feasibility of using sefl-paced instruction without programed texts in a clerical and computational skills course. Course organization, course management, and effective instructional techniques for self-paced training…

Association of goal orientation with work engagement and burnout in emergency nurses.

PubMed

Adriaenssens, Jef; De Gucht, Veronique; Maes, Stan

2015-01-01

Goal orientation is a mindset towards the achievement of work-related goals, and it has been found to be related to occupational well-being. This study explored to what extent the 4-dimensional model of goal orientation adds additional variance to the explanation of burnout and work engagement in emergency nurses, after controlling for demographics, job characteristics and organizational variables. Self-report questionnaires including the Leiden Quality of Work Questionnaire for Nurses, Goal Orientation Questionnaire, Maslach Burnout Inventory and Utrecht Work Engagement Scale were completed by 170 out of 274 emergency nurses from 13 secondary Belgian hospitals (response rate 62%). Hierarchical multiple regression analyses were conducted. Goal orientation explained 14 and 13% of the variance in burnout and work engagement respectively. Job control was predictive of both outcomes. Job demands was a predictor of burnout, and social support predicted work engagement. Reward was related to work engagement. The mastery-approach goal orientation was strongly related to an increase in work engagement and to a decrease in burnout. The performance-avoidance goal orientation was strongly related to a decrease in work engagement and to an increase in burnout. The performance-approach and mastery-avoidance goal orientations were not predictive for the two outcome variables. Goal orientation explains additional variance in burnout and work engagement over and above work characteristics and organizational variables. A mastery-approach goal orientation appears to be beneficial while a performance-avoidance goal orientation is not. Hospital management should therefore invest in personal involvement and growth of ER-nurses and in a rewarding organizational culture.

Career Education for Adults: Consumer Economics Module.

ERIC Educational Resources Information Center

Auburn Univ., AL. Dept. of Vocational and Adult Education.

An outgrowth of State-sponsored institutes conducted by Auburn University, Alabama, to produce career education teaching modules for adults, the consumer economics module is one of five field-tested curriculum guides adopted from findings of the nationally oriented Adult Performance Level Study conducted at the University of Texas. The primary…

Career Education for Adults: Occupational Information Module.

ERIC Educational Resources Information Center

Auburn Univ., AL. Dept. of Vocational and Adult Education.

An outgrowth of State-sponsored institutes conducted by Auburn University, Alabama, to produce career education teaching modules for adults, the occupational knowledge module is one of five field-tested curriculum guides adopted from findings of the nationally oriented Adult Performance Level Study conducted at the University of Texas. (Basic to…

Career Education for Adults: Community Resources Module.

ERIC Educational Resources Information Center

Auburn Univ., AL. Dept. of Vocational and Adult Education.

An outgrowth of State-sponsored institutes conducted by Auburn University, Alabama, to produce career education teaching modules for adults, the community resources module is one of five field-tested curriculum guides adopted from findings of the nationally oriented Adult Performance Level Study conducted at the University of Texas. (Basic to the…

Career Education for Adults: Health Module.

ERIC Educational Resources Information Center

Auburn Univ., AL. Dept. of Vocational and Adult Education.

An outgrowth of State-sponsored institutes conducted by Auburn University, Alabama, to produce career education teaching modules for adults, the health module is one of five field-tested curriculum guides adopted from findings of the nationally oriented Adult Performance Level Study conducted at the University of Texas. (Basic to the Texas study…

Career Education for Adults: Government and Law.

ERIC Educational Resources Information Center

Auburn Univ., AL. Dept. of Vocational and Adult Education.

An outgrowth of State-sponsored institutes conducted by Auburn University, Alabama, to produce career education teaching modules for adults, the government and law module is one of five field-tested curriculum guides adopted from findings of the nationally oriented Adult Performance Level Study conducted at the University of Texas. (Basic to the…

Conducting On-Farm Animal Research: Procedures & Economic Analysis.

ERIC Educational Resources Information Center

Amir, Pervaiz; Knipscheer, Hendrik C.

This book is intended to give animal scientists elementary tools to perform on-farm livestock analysis and to provide crop-oriented farming systems researchers with methods for conducting animal research. Chapter 1 describes farming systems research as a systems approach to on-farm animal research. Chapter 2 outlines some important…

Electrostatic force microscopy on oriented graphite surfaces: coexistence of insulating and conducting behaviors.

PubMed

Lu, Yonghua; Muñoz, M; Steplecaru, C S; Hao, Cheng; Bai, Ming; Garcia, N; Schindler, K; Esquinazi, P

2006-08-18

We present measurements of the electric potential fluctuations on the surface of highly oriented pyrolytic graphite using electrostatic force and atomic force microscopy. Micrometric domainlike potential distributions are observed even when the sample is grounded. Such potential distributions are unexpected given the good metallic conductivity of graphite because the surface should be an equipotential. Our results indicate the coexistence of regions with "metalliclike" and "insulatinglike" behaviors showing large potential fluctuations of the order of 0.25 V. In lower quality graphite, this effect is not observed. Experiments are performed in Ar and air atmospheres.

Cognition- and affect-based trust and feedback-seeking behavior: the roles of value, cost, and goal orientations.

PubMed

Choi, Byoung Kwon; Moon, Hyoung Koo; Nae, Eun Young

2014-01-01

We examined how subordinates' cognition- and affect-based trust in supervisors influences their feedback-seeking behavior (FSB) by considering the different cost/value perception of FSB and goal orientation (i.e., learning and performance goal orientations). Using data from 194 supervisor-subordinate dyads in South Korea, we conducted multiple regression analyses to test our hypotheses. The results showed that, whereas subordinates' cognition-based trust in supervisors positively influenced their FSB through increasing the perceived value of feedback received from supervisors, their affect-based trust in supervisors positively influenced their FSB through decreasing the perceived value of FSB. Additionally, we found that, when subordinates had high levels of learning goal orientation, the increasing influence of cognition-based trust on the value of feedback was stronger; in contrast, when subordinates had low levels of performance goal orientation, the decreasing influence of affect-based trust on the cost of FSB was stronger. The theoretical and practical implications, limitations, and suggestions for future research were discussed.

Dual-task results and the lateralization of spatial orientation: artifact of test selection?

PubMed

Bowers, C A; Milham, L M; Price, C

1998-01-01

An investigation was conducted to identify the degree to which results regarding the lateralization of spatial orientation among men and women are artifacts of test selection. A dual-task design was used to study possible lateralization differences, providing baseline and dual-task measures of spatial-orientation performance, right- and left-hand tapping, and vocalization of "cat, dog, horse." The Guilford-Zimmerman Test (Guilford & Zimmerman, 1953), the Eliot-Price Test (Eliot & Price, 1976), and the Stumpf-Fay Cube Perspectives Test (Stumpf & Fay, 1983) were the three spatial-orientation tests used to investigate possible artifacts of test selection. Twenty-eight right-handed male and 39 right-handed female undergraduates completed random baseline and dual-task sessions. Analyses indicated no significant sex-related differences in spatial-orientation ability for all three tests. Furthermore, there was no evidence of differential lateralization of spatial orientation between the sexes.

Back to the Consideration of Future Consequences Scale: time to reconsider?

PubMed

Rappange, David R; Brouwer, Werner B F; van Exel, N Job A

2009-10-01

The Consideration of Future Consequences (CFC) Scale is a measure of the extent to which individuals consider and are influenced by the distant outcomes of current behavior. In this study, the authors conducted factor analysis to investigate the factor structure of the 12-item CFC Scale. The authors found evidence for a multiple factor solution including one completely present-oriented factor consisting of all 7 present-oriented items, and one or two future-oriented factors consisting of the remaining future-oriented items. Further evidence indicated that the present-oriented factor and the 12-item CFC Scale perform similarly in terms of internal consistency and convergent validity. The structure and content of the future-oriented factor(s) is unclear. From the findings, the authors raise questions regarding the construct validity of the CFC Scale, the interpretation of its results, and the usefulness of the CFC scale in its current form in applied research.

Effects of Achievement Goals on Challenge Seeking and Feedback Processing: Behavioral and fMRI Evidence

PubMed Central

Lee, Woogul; Kim, Sung-il

2014-01-01

We conducted behavioral and functional magnetic resonance imaging (fMRI) research to investigate the effects of two types of achievement goals—mastery goals and performance-approach goals— on challenge seeking and feedback processing. The results of the behavioral experiment indicated that mastery goals were associated with a tendency to seek challenge, both before and after experiencing difficulty during task performance, whereas performance-approach goals were related to a tendency to avoid challenge after encountering difficulty during task performance. The fMRI experiment uncovered a significant decrease in ventral striatal activity when participants received negative feedback for any task type and both forms of achievement goals. During the processing of negative feedback for the rule-finding task, performance-approach-oriented participants showed a substantial reduction in activity in the dorsolateral prefrontal cortex (DLPFC) and the frontopolar cortex, whereas mastery-oriented participants showed little change. These results suggest that performance-approach-oriented participants are less likely to either recruit control processes in response to negative feedback or focus on task-relevant information provided alongside the negative feedback. In contrast, mastery-oriented participants are more likely to modulate aversive valuations to negative feedback and focus on the constructive elements of feedback in order to attain their task goals. We conclude that performance-approach goals lead to a reluctant stance towards difficulty, while mastery goals encourage a proactive stance. PMID:25251396

Theoretical and experimental analyses to determine the effects of crystal orientation and grain size on the thermoelectric properties of oblique deposited bismuth telluride thin films

NASA Astrophysics Data System (ADS)

Morikawa, Satoshi; Satake, Yuji; Takashiri, Masayuki

2018-06-01

The effects of crystal orientation and grain size on the thermoelectric properties of Bi2Te3 thin films were investigated by conducting experimental and theoretical analyses. To vary the crystal orientation and grain size, we performed oblique deposition, followed by thermal annealing treatment. The crystal orientation decreased as the oblique angle was increased, while the grain size was not changed significantly. The thermoelectric properties were measured at room temperature. A theoretical analysis was performed using a first principles method based on density functional theory. Then the semi-classical Boltzmann transport equation was used in the relaxation time approximation, with the effect of grain size included. Furthermore, the effect of crystal orientation was included in the calculation based on a simple semi-experimental model. A maximum power factor of 11.6 µW/(cm·K2) was obtained at an oblique angle of 40°. The calculated thermoelectric properties were in very good agreement with the experimentally measured values.

Comparison of Cognitive Orientation to daily Occupational Performance and conventional occupational therapy on occupational performance in individuals with stroke: A randomized controlled trial.

PubMed

Ahn, Si-Nae; Yoo, Eun-Young; Jung, Min-Ye; Park, Hae-Yean; Lee, Ji-Yeon; Choi, Yoo-Im

2017-01-01

Cognitive Orientation to daily Occupational Performance (CO-OP) approach based on cognitive strategy in occupational therapy. To investigate the effects of CO-OP approach on occupational performance in individuals with hemiparetic stroke. This study was designed as a 5-week, randomized, single-blind. Forty-three participants who had a diagnosis of first stroke were enrolled in this study. The participants were randomly assigned to the experimental group (n = 20) or the control group (n = 23). The experimental group conducted CO-OP approach while the control group conducted conventional occupational therapy based on occupational performance components. This study measured Canadian Occupational Performance Measure (COPM) and Performance Quality Rating Scale (PQRS). Outcome measurements were performed at baseline and post-intervention. After training, the scores of COPM and PQRS in trained task were significantly higher for the score in the experimental group than the control group. In addition, the non-trained task was significantly higher for the score in the experimental group than the control group in COPM and the PQRS. This study suggests that the CO-OP approach is beneficial effects on the occupational performance to improvement in individuals with hemiparetic stroke, and have positive effects on generalization and transfer of acquired skills.

Performance Measurement in Helicopter Training and Operations.

ERIC Educational Resources Information Center

Prophet, Wallace W.

For almost 15 years, HumRRO Division No. 6 has conducted an active research program on techniques for measuring the flight performance of helicopter trainees and pilots. This program addressed both the elemental aspects of flying (i.e., maneuvers) and the mission- or goal-oriented aspects. A variety of approaches has been investigated, with the…

Humanistic versus Authoritarian Teachers: A Reflection on Students' Academic Motivation and Performance

ERIC Educational Resources Information Center

Sultan, Sarwat; Hussain, Irshad

2012-01-01

This prospective study using self-determination theory was conducted to predict the students' motivation and academic performance based on their perceived teachers' humanistic vs. authoritarian orientations in the classrooms. The sample consisted of 300 students aged 14-18 years taken from different schools of Multan. The Pupil Control Behavior…

Moral competence as a positive youth development construct: conceptual bases and implications for curriculum development.

PubMed

Ma, Hing Keung

2006-01-01

Moral competence refers to the orientation to perform altruistic behavior and the ability to judge moral issues logically, consistently and at an advanced level of development. A brief review of the concepts of altruism and justice is presented. The gender and cultural issues are also discussed. The contents of moral competence program units include four major topics: (1) Fairness, (2) Proper conduct (mainly altruistic and prosocial orientation), (3) Responsibility and altruistic orientation, and (4) Integrity and fairness. The general goal is to help students to develop an altruistic orientation and a judgment structure of a high level of justice. This paper is part of the development of the positive youth development program in Hong Kong.

Modulating Thin Film Transistor Characteristics by Texturing the Gate Metal.

PubMed

Nair, Aswathi; Bhattacharya, Prasenjit; Sambandan, Sanjiv

2017-12-20

The development of reliable, high performance integrated circuits based on thin film transistors (TFTs) is of interest for the development of flexible electronic circuits. In this work we illustrate the modulation of TFT transconductance via the texturing of the gate metal created by the addition of a conductive pattern on top of a planar gate. Texturing results in the semiconductor-insulator interface acquiring a non-planar geometry with local variations in the radius of curvature. This influences various TFT parameters such as the subthreshold slope, gate voltage at the onset of conduction, contact resistance and gate capacitance. Specific studies are performed on textures based on periodic striations oriented along different directions. Textured TFTs showed upto ±40% variation in transconductance depending on the texture orientation as compared to conventional planar gate TFTs. Analytical models are developed and compared with experiments. Gain boosting in common source amplifiers based on textured TFTs as compared to conventional TFTs is demonstrated.

Position, Orientation and Velocity Detection of Unmanned Underwater Vehicles (UUVs) Using an Optical Detector Array

PubMed Central

Pe’eri, Shachak; Thein, May-Win; Rzhanov, Yuri; Celikkol, Barbaros; Swift, M. Robinson

2017-01-01

This paper presents a proof-of-concept optical detector array sensor system to be used in Unmanned Underwater Vehicle (UUV) navigation. The performance of the developed optical detector array was evaluated for its capability to estimate the position, orientation and forward velocity of UUVs with respect to a light source fixed in underwater. The evaluations were conducted through Monte Carlo simulations and empirical tests under a variety of motion configurations. Monte Carlo simulations also evaluated the system total propagated uncertainty (TPU) by taking into account variations in the water column turbidity, temperature and hardware noise that may degrade the system performance. Empirical tests were conducted to estimate UUV position and velocity during its navigation to a light beacon. Monte Carlo simulation and empirical results support the use of the detector array system for optics based position feedback for UUV positioning applications. PMID:28758936

Chemically modified graphene/polyimide composite films based on utilization of covalent bonding and oriented distribution.

PubMed

Huang, Ting; Lu, Renguo; Su, Chao; Wang, Hongna; Guo, Zheng; Liu, Pei; Huang, Zhongyuan; Chen, Haiming; Li, Tongsheng

2012-05-01

Herein, we have developed a rather simple composite fabrication approach to achieving molecular-level dispersion and planar orientation of chemically modified graphene (CMG) in the thermosetting polyimide (PI) matrix as well as realizing strong adhesion at the interfacial regions between reinforcing filler and matrix. The covalent adhesion of CMG to PI matrix and oriented distribution of CMG were carefully confirmed and analyzed by detailed investigations. Combination of covalent bonding and oriented distribution could enlarge the effectiveness of CMG in the matrix. Efficient stress transfer was found at the CMG/PI interfaces. Significant improvements in the mechanical performances, thermal stability, electrical conductivity, and hydrophobic behavior were achieved by addition of only a small amount of CMG. Furthermore, it is noteworthy that the hydrophilic-to-hydrophobic transition and the electrical percolation were observed at only 0.2 wt % CMG in this composite system. This facile methodology is believed to afford broad application potential in graphene-based polymer nanocomposites, especially other types of high-performance thermosetting systems.

Lost and forgotten? Orientation versus memory in Alzheimer's disease and frontotemporal dementia.

PubMed

Yew, Belinda; Alladi, Suvarna; Shailaja, Mekala; Hodges, John R; Hornberger, Michael

2013-01-01

Recent studies suggest that significant memory problems are not specific to Alzheimer's disease (AD) but can be also observed in other neurodegenerative conditions, such as behavioral variant frontotemporal dementia (bvFTD). We investigated whether orientation (spatial & temporal) information is a better diagnostic marker for AD compared to memory and whether their atrophy correlates of orientation and memory differ. A large sample (n = 190) of AD patients (n = 73), bvFTD patients (n = 54), and healthy controls (n = 63) underwent testing. A subset of the patients (n = 72) underwent structural imaging using voxel-based morphometry analysis of magnetic resonance brain imaging. Orientation and memory scores from the Addenbrooke's Cognitive Examination showed that AD patients had impaired orientation and memory, while bvFTD patients performing at control level for orientation but had impaired memory. A logistic regression showed that 78% of patients could be classified on the basis of orientation and memory scores alone at clinic presentation. Voxel-based morphometry analysis was conducted using orientation and memory scores as covariates, which showed that the neural correlates for orientation and memory also dissociated with posterior hippocampus cortex being related to orientation in AD, while the anterior hippocampus was associated with memory performance in the AD and bvFTD patients. Orientation and memory measures discriminate AD and bvFTD to a high degree and tap into different hippocampal regions. Disorientation and posterior hippocampus appears therefore specific to AD and will allow clinicians to discriminate AD patients from other neurodegenerative conditions with similar memory deficits at clinic presentation.

Electrical and Self-Sensing Properties of Ultra-High-Performance Fiber-Reinforced Concrete with Carbon Nanotubes

PubMed Central

You, Ilhwan; Yoo, Doo-Yeol; Kim, Soonho; Kim, Min-Jae; Zi, Goangseup

2017-01-01

This study examined the electrical and self-sensing capacities of ultra-high-performance fiber-reinforced concrete (UHPFRC) with and without carbon nanotubes (CNTs). For this, the effects of steel fiber content, orientation, and pore water content on the electrical and piezoresistive properties of UHPFRC without CNTs were first evaluated. Then, the effect of CNT content on the self-sensing capacities of UHPFRC under compression and flexure was investigated. Test results indicated that higher steel fiber content, better fiber orientation, and higher amount of pore water led to higher electrical conductivity of UHPFRC. The effects of fiber orientation and drying condition on the electrical conductivity became minor as sufficiently high amount of steel fibers, 3% by volume, was added. Including only steel fibers did not impart UHPFRC with piezoresistive properties. Addition of CNTs substantially improved the electrical conductivity of UHPFRC. Under compression, UHPFRC with a CNT content of 0.3% or greater had a self-sensing ability that was activated by the formation of cracks, and better sensing capacity was achieved by including greater amount of CNTs. Furthermore, the pre-peak flexural behavior of UHPFRC was precisely simulated with a fractional change in resistivity when 0.3% CNTs were incorporated. The pre-cracking self-sensing capacity of UHPFRC with CNTs was more effective under tensile stress state than under compressive stress state. PMID:29109388

Electrical and Self-Sensing Properties of Ultra-High-Performance Fiber-Reinforced Concrete with Carbon Nanotubes.

PubMed

You, Ilhwan; Yoo, Doo-Yeol; Kim, Sooho; Kim, Min-Jae; Zi, Goangseup

2017-10-29

This study examined the electrical and self-sensing capacities of ultra-high-performance fiber-reinforced concrete (UHPFRC) with and without carbon nanotubes (CNTs). For this, the effects of steel fiber content, orientation, and pore water content on the electrical and piezoresistive properties of UHPFRC without CNTs were first evaluated. Then, the effect of CNT content on the self-sensing capacities of UHPFRC under compression and flexure was investigated. Test results indicated that higher steel fiber content, better fiber orientation, and higher amount of pore water led to higher electrical conductivity of UHPFRC. The effects of fiber orientation and drying condition on the electrical conductivity became minor as sufficiently high amount of steel fibers, 3% by volume, was added. Including only steel fibers did not impart UHPFRC with piezoresistive properties. Addition of CNTs substantially improved the electrical conductivity of UHPFRC. Under compression, UHPFRC with a CNT content of 0.3% or greater had a self-sensing ability that was activated by the formation of cracks, and better sensing capacity was achieved by including greater amount of CNTs. Furthermore, the pre-peak flexural behavior of UHPFRC was precisely simulated with a fractional change in resistivity when 0.3% CNTs were incorporated. The pre-cracking self-sensing capacity of UHPFRC with CNTs was more effective under tensile stress state than under compressive stress state.

Wave propagation modeling in composites reinforced by randomly oriented fibers

NASA Astrophysics Data System (ADS)

Kudela, Pawel; Radzienski, Maciej; Ostachowicz, Wieslaw

2018-02-01

A new method for prediction of elastic constants in randomly oriented fiber composites is proposed. It is based on mechanics of composites, the rule of mixtures and total mass balance tailored to the spectral element mesh composed of 3D brick elements. Selected elastic properties predicted by the proposed method are compared with values obtained by another theoretical method. The proposed method is applied for simulation of Lamb waves in glass-epoxy composite plate reinforced by randomly oriented fibers. Full wavefield measurements conducted by the scanning laser Doppler vibrometer are in good agreement with simulations performed by using the time domain spectral element method.

Reduced conductivity and enhancement of Debye orientational polarization in lanthanum doped cobalt ferrite nanoparticles

NASA Astrophysics Data System (ADS)

Rahman, Atta ur; Rafiq, M. A.; Karim, S.; Maaz, K.; Siddique, M.; Hasan, M. M.

2011-12-01

In this work we have investigated the conductivity and dielectric properties of CoLaxFe2-xO4 (x=0.0, 0.03, 0.05, and 0.07) nanoparticles synthesized by chemical co-precipitation route. X-ray diffraction analysis confirms the inverse spinal structure of nanoparticles with slight increase in the lattice constant as La concentration increases. Transmission electron microscopy shows spherical nanoparticles with sizes of ∼20 nm. Impedance spectroscopy of the samples was performed in the frequency range 20 Hz-2 MHz at room temperature. The resistance of the grains and grain boundaries was found to increase with lanthanum concentration while the AC conductivity of the samples was observed to decrease with increasing La concentration. Dipolar orientational polarization was found to play an important role in determining dielectric properties of the samples.

Optical performance effects of the misalignment of nonimaging optics solar collectors

NASA Astrophysics Data System (ADS)

Ferry, Jonathan; Ricketts, Melissa; Winston, Roland

2017-09-01

The use of non-imaging optics in the application of high temperature solar thermal collectors can be extremely advantageous in eliminating the need to track the sun. The stationary nature of non-imaging optics collectors, commonly called compound parabolic concentrators (CPC's), present a unique design challenge when orienting them to collect sunlight. Many facilities throughout the world that adopt CPCs are not situated to orient the collectors in the ideal angle facing the sun. This East-West misalignment can adversely affect the optical and power performance of the CPC collector. To characterize how this misalignment effects CPCs, reverse raytracing simulations are conducted for varying offset angles of the collectors from solar South. Optical performance is analyzed for an ideal East-West oriented CPC with a 40-degree acceptance angle. Direction cosine plots are used to develop a ratio of annual solar collection by the CPC over the total annual solar input. From these simulations, average annual collector performance is given for offset angles ranging from 0 to 90 degrees for different Earth Latitudes in 10 degree increments.

Performance oriented guidance for Mississippi chip seals - volume I.

DOT National Transportation Integrated Search

2013-12-01

A five year laboratory study was conducted to investigate near surface properties of flexible pavements in relation to : how they are affected by bituminous surface treatments. Chip seals and scrub seals (a specialized type of chip seal) : were the f...

Influence of dissolved hydrogen on aluminum-lithium alloy fracture behavior

NASA Technical Reports Server (NTRS)

Rivet, F. C.; Swanson, R. E.

1989-01-01

The objective of this work is to study the effects of dissolved hydrogen on the mechanical properties of 2090 and 2219 alloys. Prior to mechanical testing, potentiostatic and potentiodynamic tests were performed using NaCl/HCl solutions varying in pH from 1.5 to 7.5 (3.5 pct NaCl in deionized water). After analysis of the potentiodynamic curve for each solution, several potentiostatic experiments were conducted for various times (from 10 minutes to several hours) with a cathodic overpotential of 300 mV. These experiments were performed to select charging conditions. It is shown that the fracture of L-S and T-S orientations proceeds via slipping of layers in the S-T direction. The T-S and L-S orientations fractured with substantially higher propagation energy that the L-T and T-L orientations, due in large part to the extensive delamination propagation of the fracture.

Effects of field orientation during 700-MHz radiofrequency irradiation of rats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frei, M.R.; Jauchem, J.R.; Padilla, J.M.

1989-01-01

Ketamine-anesthetized Sprague-Dawley rats were exposed to far-field 700-MHz continuous-wave radiofrequency radiation (RFR) in both E and H orientations. Irradiation was conducted at whole-body average specific absorption rates (SARs) of 9.2 and 13.0 W/kg (E and H, respectively) that resulted in approximately equivalent colonic specific heating rates (SHRs). Exposures were performed to repeatedly increase colonic temperature by 1 deg C (38.5 to 39.5 deg C). Tympanic, tail, left and right subcutaneous (toward and away from RFR source), and colonic temperatures, arterial blood pressure, and respiratory rate were continuously recorded. In spite of equivalent colonic SHRs and the reduced E-orientation average SAR,more » the right subcutaneous, tympanic, and tail SARs, SHRs and absolute temperature increases were significantly greater in E than in H orientation. The cooling rate at all monitoring sites was also significantly greater in E than in H orientation. Heart rate and mean arterial blood pressure significantly increased during irradiation; however, changer between orientations were not different. Respiratory rate significantly increased during irradiation in H, but not in E orientation. These results indicate that during resonant frequency irradiation, differences occur in the pattern of heat deposition between E- and H-orientation exposure. When compared with previous investigations performed at supraresonant frequencies, the lower level of cardiovascular change in this study was probably related to the lower periphery-to-core thermal gradient.« less

Effects of field orientation during 700-MHz radiofrequency irradiation of rats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frei, M.R.; Jauchem, J.R.; Padilla, J.M.

1989-01-01

Ketamine-anesthetized Sprague-Dawley rats were exposed to far-field 700-MHz continuous-wave radiofrequency radiation (RFR) in both E and H orientations. Irradiation was conducted at whole-body average specific absorption rates (SARs) of 9.2 and 13.0 W/kg (E and H, respectively) that resulted in approximately equivalent colonic specific heating rates (SHRs). Exposures were performed to repeatedly increase colonic temperature by 1 degree C (38.5 to 39.5 degrees C). Tympanic, tail, left and right subcutaneous (toward and away from RFR source), and colonic temperatures, arterial blood pressure, and respiratory rate were continuously recorded. In spite of equivalent colonic SHRs and the reduced E-orientation average SAR,more » the right subcutaneous, tympanic, and tail SARs, SHRs and absolute temperature increases were significantly greater in E than in H orientation. The cooling rate at all monitoring sites was also significantly greater in E than in H orientation. Heart rate and mean arterial blood pressure significantly increased during irradiation; however, changes between orientations were not different. Respiratory rate significantly increased during irradiation in H, but not in E orientation. These results indicate that during resonant frequency irradiation, differences occur in the pattern of heat deposition between E- and H-orientation exposure. When compared with previous investigations performed at supraresonant frequencies, the lower level of cardiovascular change in this study was probably related to the lower periphery-to-core thermal gradient.« less

Thermal conductivity engineering of bulk and one-dimensional Si-Ge nanoarchitectures.

PubMed

Kandemir, Ali; Ozden, Ayberk; Cagin, Tahir; Sevik, Cem

2017-01-01

Various theoretical and experimental methods are utilized to investigate the thermal conductivity of nanostructured materials; this is a critical parameter to increase performance of thermoelectric devices. Among these methods, equilibrium molecular dynamics (EMD) is an accurate technique to predict lattice thermal conductivity. In this study, by means of systematic EMD simulations, thermal conductivity of bulk Si-Ge structures (pristine, alloy and superlattice) and their nanostructured one dimensional forms with square and circular cross-section geometries (asymmetric and symmetric) are calculated for different crystallographic directions. A comprehensive temperature analysis is evaluated for selected structures as well. The results show that one-dimensional structures are superior candidates in terms of their low lattice thermal conductivity and thermal conductivity tunability by nanostructuring, such as by diameter modulation, interface roughness, periodicity and number of interfaces. We find that thermal conductivity decreases with smaller diameters or cross section areas. Furthermore, interface roughness decreases thermal conductivity with a profound impact. Moreover, we predicted that there is a specific periodicity that gives minimum thermal conductivity in symmetric superlattice structures. The decreasing thermal conductivity is due to the reducing phonon movement in the system due to the effect of the number of interfaces that determine regimes of ballistic and wave transport phenomena. In some nanostructures, such as nanowire superlattices, thermal conductivity of the Si/Ge system can be reduced to nearly twice that of an amorphous silicon thermal conductivity. Additionally, it is found that one crystal orientation, [Formula: see text]100[Formula: see text], is better than the [Formula: see text]111[Formula: see text] crystal orientation in one-dimensional and bulk SiGe systems. Our results clearly point out the importance of lattice thermal conductivity engineering in bulk and nanostructures to produce high-performance thermoelectric materials.

Thermal conductivity engineering of bulk and one-dimensional Si-Ge nanoarchitectures

PubMed Central

Kandemir, Ali; Ozden, Ayberk; Cagin, Tahir; Sevik, Cem

2017-01-01

Various theoretical and experimental methods are utilized to investigate the thermal conductivity of nanostructured materials; this is a critical parameter to increase performance of thermoelectric devices. Among these methods, equilibrium molecular dynamics (EMD) is an accurate technique to predict lattice thermal conductivity. In this study, by means of systematic EMD simulations, thermal conductivity of bulk Si-Ge structures (pristine, alloy and superlattice) and their nanostructured one dimensional forms with square and circular cross-section geometries (asymmetric and symmetric) are calculated for different crystallographic directions. A comprehensive temperature analysis is evaluated for selected structures as well. The results show that one-dimensional structures are superior candidates in terms of their low lattice thermal conductivity and thermal conductivity tunability by nanostructuring, such as by diameter modulation, interface roughness, periodicity and number of interfaces. We find that thermal conductivity decreases with smaller diameters or cross section areas. Furthermore, interface roughness decreases thermal conductivity with a profound impact. Moreover, we predicted that there is a specific periodicity that gives minimum thermal conductivity in symmetric superlattice structures. The decreasing thermal conductivity is due to the reducing phonon movement in the system due to the effect of the number of interfaces that determine regimes of ballistic and wave transport phenomena. In some nanostructures, such as nanowire superlattices, thermal conductivity of the Si/Ge system can be reduced to nearly twice that of an amorphous silicon thermal conductivity. Additionally, it is found that one crystal orientation, <100>, is better than the <111> crystal orientation in one-dimensional and bulk SiGe systems. Our results clearly point out the importance of lattice thermal conductivity engineering in bulk and nanostructures to produce high-performance thermoelectric materials. PMID:28469733

A user oriented computer program for the analysis of microwave mixers, and a study of the effects of the series inductance and diode capacitance on the performance of some simple mixers

NASA Technical Reports Server (NTRS)

Siegel, P. H.; Kerr, A. R.

1979-01-01

A user oriented computer program for analyzing microwave and millimeter wave mixers with a single Schottky barrier diode of known I-V and C-V characteristics is described. The program first performs a nonlinear analysis to determine the diode conductance and capacitance waveforms produced by the local oscillator. A small signal linear analysis is then used to find the conversion loss, port impedances, and input noise temperature of the mixer. Thermal noise from the series resistance of the diode and shot noise from the periodically pumped current in the diode conductance are considered. The effects of the series inductance and diode capacitance on the performance of some simple mixer circuits using a conventional Schottky diode, a Schottky diode in which there is no capacitance variation, and a Mott diode are studied. It is shown that the parametric effects of the voltage dependent capacitance of a conventional Schottky diode may be either detrimental or beneficial depending on the diode and circuit parameters.

3-D direct current resistivity anisotropic modelling by goal-oriented adaptive finite element methods

NASA Astrophysics Data System (ADS)

Ren, Zhengyong; Qiu, Lewen; Tang, Jingtian; Wu, Xiaoping; Xiao, Xiao; Zhou, Zilong

2018-01-01

Although accurate numerical solvers for 3-D direct current (DC) isotropic resistivity models are current available even for complicated models with topography, reliable numerical solvers for the anisotropic case are still an open question. This study aims to develop a novel and optimal numerical solver for accurately calculating the DC potentials for complicated models with arbitrary anisotropic conductivity structures in the Earth. First, a secondary potential boundary value problem is derived by considering the topography and the anisotropic conductivity. Then, two a posteriori error estimators with one using the gradient-recovery technique and one measuring the discontinuity of the normal component of current density are developed for the anisotropic cases. Combing the goal-oriented and non-goal-oriented mesh refinements and these two error estimators, four different solving strategies are developed for complicated DC anisotropic forward modelling problems. A synthetic anisotropic two-layer model with analytic solutions verified the accuracy of our algorithms. A half-space model with a buried anisotropic cube and a mountain-valley model are adopted to test the convergence rates of these four solving strategies. We found that the error estimator based on the discontinuity of current density shows better performance than the gradient-recovery based a posteriori error estimator for anisotropic models with conductivity contrasts. Both error estimators working together with goal-oriented concepts can offer optimal mesh density distributions and highly accurate solutions.

A Job Aid Solution to the Need for Low Cost, Results Oriented Dental Laboratory Manufacturing Industry Training.

ERIC Educational Resources Information Center

Selg, Timothy E.

A thesis project was conducted to design, develop, implement, and evaluate a job aid used by shipping department employees in a dental laboratory. The job aid was developed in preference to training to solve the organization's performance problem. Task analysis was performed to identify the shipping clerks' duties. These tasks were stated in the…

Influence of Preferred Orientation on the Electrical Conductivity of Fluorine-Doped Tin Oxide Films

PubMed Central

Wang, Jian Tao; Shi, Xiang Lei; Liu, Wei Wei; Zhong, Xin Hua; Wang, Jian Nong; Pyrah, Leo; Sanderson, Kevin D.; Ramsey, Philip M.; Hirata, Masahiro; Tsuri, Keiko

2014-01-01

Current development of high-performance transparent conductive oxide (TCO) films is limited with tradeoff between carrier mobility and concentration since none of them can be improved without sacrificing the other. In this study, we prepare fluorine doped tin oxide (FTO) films by chemical vapor deposition with inclusions of different additives and report that the mobility can be varied from 0.65 to 28.5 cm2 V−1 s−1 without reducing the achieved high carrier concentration of 4 × 1020 cm−3. Such an increase in mobility is shown to be clearly associated with the development of (200) preferred orientation (PO) but concurrent degradation of (110) PO in films. Thus, at a constant high carrier concentration, the electrical conductivity can be improved via carrier mobility simply by PO control. Such a one-step approach avoiding conventional post-deposition treatment is suggested for developing next-generation FTO as well as other TCO films with better than ever conductivities. PMID:24419455

Magnetic preferential orientation of metal oxide superconducting materials

DOEpatents

Capone, D.W.; Dunlap, B.D.; Veal, B.W.

1990-07-17

A superconductor comprised of a polycrystalline metal oxide such as YBa[sub 2]Cu[sub 3]O[sub 7[minus]X] (where 0 < X < 0.5) exhibits superconducting properties and is capable of conducting very large current densities. By aligning the two-dimensional Cu-O layers which carry the current in the superconducting state in the a- and b-directions, i.e., within the basal plane, a high degree of crystalline axes alignment is provided between adjacent grains permitting the conduction of high current densities. The highly anisotropic diamagnetic susceptibility of the polycrystalline metal oxide material permits the use of an applied magnetic field to orient the individual crystals when in the superconducting state to substantially increase current transport between adjacent grains. In another embodiment, the anisotropic paramagnetic susceptibility of rare-earth ions substituted into the oxide material is made use of as an applied magnetic field orients the particles in a preferential direction. This latter operation can be performed with the material in the normal (non-superconducting) state. 4 figs.

Magnetic preferential orientation of metal oxide superconducting materials

DOEpatents

Capone, Donald W.; Dunlap, Bobby D.; Veal, Boyd W.

1990-01-01

A superconductor comprised of a polycrystalline metal oxide such as YBa.sub.2 Cu.sub.3 O.sub.7-X (where 0

DRAPING SIMULATION OF WOVEN FABRICS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodgers, William; Jin, Xiaoshi; Zhu, Jiang

2016-09-07

Woven fabric composites are extensively used in molding complex geometrical shapes due to their high conformability compared to other fabrics. Preforming is an important step in the overall process, where the two-dimensional fabric is draped to become the three-dimensional shape of the part prior to resin injection. During preforming, the orientation of the yarns may change significantly compared to the initial orientations. Accurate prediction of the yarn orientations after molding is important for evaluating the structural performance of the final part. This paper presents a systematic investigation of the angle changes during the preform operation for carbon fiber twill andmore » satin weave fabrics. Preforming experiments were conducted using a truncated pyramid mold geometry designed and fabricated at the General Motors Research Laboratories. Predicted results for the yarn orientations were compared with experimental results and good agreement was observed« less

Integration of altitude and airspeed information into a primary flight display via moving-tape formats

NASA Technical Reports Server (NTRS)

Abbott, Terence S.; Steinmetz, George G.

1987-01-01

A ground-based aircraft simulation study was conducted to determine the effect on pilot performance of replacing the electromechanical altimeter and airspeed indicators with electronically generated representations integrated into the primary flight display via moving-tape (linear moving scale) formats. Several key factors relating to moving-tape formats were examined during the study: tape centering, secondary (trend) information, and tape orientation. The factor of centering refers to whether the tape was centered about the actual airspeed or altitude or about some defined reference value. Tape orientation refers to whether the values represented are arranged in either descending or ascending order. Six pilots participated in this study, with each subject performing 18 runs along a single, known flight profile. Subjective results indicated that the moving-tape formats were generally better than that of the conventional instruments. They also indicated that an actual-centered fixed pointer was preferred to a reference-centered pointer. Performance data for a visual secondary task showed that formats not containing trend information produced better performance; however, no difference was noted in airspeed tracking or altitude tracking performance. Regarding tape orientation, subjective comments indicated that there was lower work load and better performance when the airspeed tape had the high numbers at the top.

Effects of in-competitive season power-oriented and heavy resistance lower-body training on performance of elite female water polo players.

PubMed

Veliz, Rafael R; Suarez-Arrones, Luis; Requena, Bernardo; Haff, G Gregory; Feito, Javier; Sáez de Villarreal, Eduardo

2015-02-01

We examined the effect of 16 weeks of lower-body resistance and power-oriented training on key performance measures of elite female water polo players. Twenty-one players were randomly assigned to 2 groups: control group (C) who did in-water training only and a lower body strength (LBS) group, who performed resistance (full squat and split squat) and jump and power-oriented lower-body training (countermovement jump [CMJ] loaded and CMJ) sessions (twice per week) in addition to the same in-water training. In-water training was conducted 5 days per week for a total of 16 weeks. Twenty-meter maximal sprint swim (MSS), lower-body strength during 1 repetition maximum (1RM) full squat (FS), in-water boost and CMJ, and Throwing speed (ThS) were measured before and after the training. Pretraining results showed no statistically significant differences between the groups in any of the variables tested. After 16 weeks, no statistically significant improvement was found in any of the variables measured in the C group, however, significant improvement was found in the LBS group: in-water boost (4.6 cm, 12.02%, effect size [ES] = 1.02), CMJ (2.4 cm, 8.66%, ES = 0.85), FS (12.7 kg, 20.99%, ES = 2.41), and ThS (3.4 km·h, 6.86%, ES = 3.44). Lower-body resistance and power-oriented training in female water polo players for 16 weeks produced significant improvements in performance qualities highly specific to water polo performance. Therefore, we propose modifications to current training methodology for female water polo players to include resistance and power-oriented training during the competitive season in this sport.

Data in support of energy performance of double-glazed windows.

PubMed

Shakouri, Mahmoud; Banihashemi, Saeed

2016-06-01

This paper provides the data used in a research project to propose a new simplified windows rating system based on saved annual energy ("Developing an empirical predictive energy-rating model for windows by using Artificial Neural Network" (Shakouri Hassanabadi and Banihashemi Namini, 2012) [1], "Climatic, parametric and non-parametric analysis of energy performance of double-glazed windows in different climates" (Banihashemi et al., 2015) [2]). A full factorial simulation study was conducted to evaluate the performance of 26 different types of windows in a four-story residential building. In order to generalize the results, the selected windows were tested in four climates of cold, tropical, temperate, and hot and arid; and four different main orientations of North, West, South and East. The accompanied datasets include the annual saved cooling and heating energy in different climates and orientations by using the selected windows. Moreover, a complete dataset is provided that includes the specifications of 26 windows, climate data, month, and orientation of the window. This dataset can be used to make predictive models for energy efficiency assessment of double glazed windows.

Shock and Microstructural Characterization of the α-ω Phase Transition in Titanium Crystals

NASA Astrophysics Data System (ADS)

Morrow, Benjamin M.; Rigg, Paulo A.; Jones, David R.; Addessio, Francis L.; Trujillo, Carl P.; Saavedra, Ramon A.; Martinez, Daniel T.; Cerreta, Ellen K.

2017-12-01

A multicrystal comprised of a small number of large crystals of high-purity titanium and a [0001] oriented high-purity single crystal titanium sample were shock loaded using gas gun plate impact experiments. Tests were performed at stresses above the α {-}ω phase transition stress (for high-purity polycrystalline specimens) to observe the behavior of oriented crystals under similar conditions. Post-mortem characterization of the shocked microstructure was conducted on the single crystal sample to measure textures, and quantify phases and twinning. The apparent activation of plastic and transformation mechanisms was dependent upon crystal orientation. Specifically, the [0001] crystal showed a higher Hugoniot elastic limit than the [10\\bar{1}0] or [3\\bar{1}\\bar{4}4] orientations. The slope of velocity as a function of time was lower in the [0001] orientation than the other orientations during plastic deformation, indicating sluggish transformation kinetics for the α to ω phase transition for the [0001] oriented crystal. Microtexture measurements of a recovered [0001] oriented single crystal revealed the presence of retained ω phase after unloading, with orientations of the constituent phase fractions indicative of the forward α → ω transition, rather than the reverse ω → α transition, suggesting that the material never achieved a state of 100% ω phase.

Automatic image orientation detection via confidence-based integration of low-level and semantic cues.

PubMed

Luo, Jiebo; Boutell, Matthew

2005-05-01

Automatic image orientation detection for natural images is a useful, yet challenging research topic. Humans use scene context and semantic object recognition to identify the correct image orientation. However, it is difficult for a computer to perform the task in the same way because current object recognition algorithms are extremely limited in their scope and robustness. As a result, existing orientation detection methods were built upon low-level vision features such as spatial distributions of color and texture. Discrepant detection rates have been reported for these methods in the literature. We have developed a probabilistic approach to image orientation detection via confidence-based integration of low-level and semantic cues within a Bayesian framework. Our current accuracy is 90 percent for unconstrained consumer photos, impressive given the findings of a psychophysical study conducted recently. The proposed framework is an attempt to bridge the gap between computer and human vision systems and is applicable to other problems involving semantic scene content understanding.

Nurses' ethical conflicts in performance of utilization reviews.

PubMed

Bell, Sue Ellen

2003-09-01

This article describes the ethical conflicts that a sample of US nurse utilization reviewers faced in their work, and also each nurse's self-reported ethical orientation that was used to resolve the dilemmas. Data were collected from a sample of 97 registered nurses who were working at least 20 hours per week as utilization reviewers. Respondents were recruited from three managed care organizations that conduct utilization reviews in a large midwestern city. A cross-sectional survey design was used to collect demographic data and to ask closed-response, short-answer and open-ended questions. Ethical conflicts reported by nurses were similar across utilization review settings and many were justice orientated. Self-reported ethical orientations were similar across organizations, with beneficence dominating. Implications of these findings are discussed.

Homosexuality as a Discrete Class.

PubMed

Norris, Alyssa L; Marcus, David K; Green, Bradley A

2015-12-01

Previous research on the latent structure of sexual orientation has returned conflicting results, with some studies finding a dimensional structure (i.e., ranging quantitatively along a spectrum) and others a taxonic structure (i.e., categories of individuals with distinct orientations). The current study used a sample (N = 33,525) from the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC). A series of taxometric analyses were conducted using three indicators of sexual orientation: identity, behavior, and attraction. These analyses, performed separately for women and men, revealed low-base-rate same-sex-oriented taxa for men (base rate = 3.0%) and women (base rate = 2.7%). Generally, taxon membership conferred an increased risk for psychiatric and substance-use disorders. Although taxa were present for men and women, women demonstrated greater sexual fluidity, such that any level of same-sex sexuality conferred taxon membership for men but not for women. © The Author(s) 2015.

Tunable transport property of oxygen ion in metal oxide thin film: Impact of electrolyte orientation on conductivity.

PubMed

Arunkumar, P; Ramaseshan, R; Dash, S; Babu, K Suresh

2017-06-14

Quest for efficient ion conducting electrolyte thin film operating at intermediate temperature (~600 °C) holds promise for the real-world utilization of solid oxide fuel cells. Here, we report the correlation between mixed as well as preferentially oriented samarium doped cerium oxide electrolyte films fabricated by varying the substrate temperatures (100, 300 and 500 °C) over anode/ quartz by electron beam physical vapor deposition. Pole figure analysis of films deposited at 300 °C demonstrated a preferential (111) orientation in out-off plane direction, while a mixed orientation was observed at 100 and 500 °C. As per extended structural zone model, the growth mechanism of film differs with surface mobility of adatom. Preferential orientation resulted in higher ionic conductivity than the films with mixed orientation, demonstrating the role of growth on electrochemical properties. The superior ionic conductivity upon preferential orientation arises from the effective reduction of anisotropic nature and grain boundary density in highly oriented thin films in out-of-plane direction, which facilitates the hopping of oxygen ion at a lower activation energy. This unique feature of growing an oriented electrolyte over the anode material opens a new approach to solving the grain boundary limitation and makes it as a promising solution for efficient power generation.

Thermal evaluation for exposed stone house with quantitative and qualitative approach in mountainous area, Wonosobo, Indonesia

NASA Astrophysics Data System (ADS)

Hermawan, Hermawan; Prianto, Eddy

2017-12-01

A building can be considered as having a good thermal performance if it can make the occupant comfortable. Thermal comfort can be seen from the occupant's respond toward the architectural elements and the environment, such as lighting, the room crowding, air temperature, humidity, oxygen level, and occupant's behaviours. The objective of this research is to analyse the thermal performance of four different orientation houses in mountainous area. The research was conducted on the four expose stone houses with four different orientations in the slope of Sindoro Mountain which has relative cool temperature, about 26°C. The measurement of the elements above was done quantitatively and qualitatively for 24 hours. The results are as follows. First, the most comfortable house is west-orientation house. Second, based on the quantitative and qualitative observation, there is no significant difference (±5 %). Third, the occupant's behaviours (caring and genen) also become factors influencing occupant's comfort.

An Object-Oriented Finite Element Framework for Multiphysics Phase Field Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael R Tonks; Derek R Gaston; Paul C Millett

2012-01-01

The phase field approach is a powerful and popular method for modeling microstructure evolution. In this work, advanced numerical tools are used to create a phase field framework that facilitates rapid model development. This framework, called MARMOT, is based on Idaho National Laboratory's finite element Multiphysics Object-Oriented Simulation Environment. In MARMOT, the system of phase field partial differential equations (PDEs) are solved simultaneously with PDEs describing additional physics, such as solid mechanics and heat conduction, using the Jacobian-Free Newton Krylov Method. An object-oriented architecture is created by taking advantage of commonalities in phase fields models to facilitate development of newmore » models with very little written code. In addition, MARMOT provides access to mesh and time step adaptivity, reducing the cost for performing simulations with large disparities in both spatial and temporal scales. In this work, phase separation simulations are used to show the numerical performance of MARMOT. Deformation-induced grain growth and void growth simulations are included to demonstrate the muliphysics capability.« less

Mirror Therapy and Task-Oriented Training for People With a Paretic Upper Extremity.

PubMed

Bondoc, Salvador; Booth, Julie; Budde, Grace; Caruso, Katelyn; DeSousa, Michelle; Earl, Brittany; Hammerton, Kaitlynn; Humphreys, Jill

This study investigates the effect of mirror therapy and task-oriented training on the paretic upper extremity function and occupational performance of people with stroke. This study used a repeated-measures, case-series design in which 4 participants completed a 4-wk intervention consisting of mirror therapy and task-specific training. The intervention was conducted 2×/wk in the clinic and 4×/wk at home. All participants displayed clinically meaningful improvements in self-identified goals at the end of the intervention and at follow-up. Three participants showed clinically meaningful changes in motor function. Although only 1 participant improved in his reported amount of use, all participants showed clinically meaningful improvements in perceived movement quality at varying points of assessment. Mirror therapy, when used as priming for task-oriented training, can produce clinical improvements in upper extremity function and occupational performance in people with hemiparesis. Copyright © 2018 by the American Occupational Therapy Association, Inc.

The contribution of cutaneous and kinesthetic sensory modalities in haptic perception of orientation.

PubMed

Frisoli, Antonio; Solazzi, Massimiliano; Reiner, Miriam; Bergamasco, Massimo

2011-06-30

The aim of this study was to understand the integration of cutaneous and kinesthetic sensory modalities in haptic perception of shape orientation. A specific robotic apparatus was employed to simulate the exploration of virtual surfaces by active touch with two fingers, with kinesthetic only, cutaneous only and combined sensory feedback. The cutaneous feedback was capable of displaying the local surface orientation at the contact point, through a small plate indenting the fingerpad at contact. A psychophysics test was conducted with SDT methodology on 6 subjects to assess the discrimination threshold of angle perception between two parallel surfaces, with three sensory modalities and two shape sizes. Results show that the cutaneous sensor modality is not affected by size of shape, but kinesthetic performance is decreasing with smaller size. Cutaneous and kinesthetic sensory cues are integrated according to a Bayesian model, so that the combined sensory stimulation always performs better than single modalities alone. Copyright © 2010 Elsevier Inc. All rights reserved.

Further improvements in conducting and transparent properties of ZnO:Ga films with perpetual c-axis orientation: Materials optimization and application in silicon solar cells

NASA Astrophysics Data System (ADS)

Mondal, Praloy; Das, Debajyoti

2017-07-01

Technologically appropriate device friendly ZnO:Ga films have been prepared at a low growth temperature (100 °C) by changing the RF power (P) applied to the magnetron plasma. Structurally preferred c-axis orientation of the ZnO:Ga network has been attained with I〈002〉/I〈103〉 > 5. The c-axis oriented grains of wurtzite ZnO:Ga grows geometrically and settles in tangentially, providing favorable conduction path for stacked layer devices. Nano-sheet like structures produced at the surface are interconnected and provide conducting path across the surface; however, those accommodate a lot of pores in between that help better light trapping and reduce the reflection loss. The optimized ZnO:Ga thin film prepared at RF power of 200 W has 〈002〉 oriented grains of average size ∼10 nm and exhibits a very high conductivity ∼200 S cm-1 and elevated transmission (∼93% at 500 nm) in the visible range. The optimized ZnO:Ga film has been used as the transparent conducting oxide (TCO) window layer of RF-PECVD grown silicon thin film solar cells in glass/TCO/p-i-n-Si/Al configuration. The characteristics of identically prepared p-i-n-Si solar cells are compared by replacing presently developed ZnO:Ga TCO with the best quality U-type SnO2 coated Asahi glass substrates. The ZnO:Ga coated glass substrate offers a higher open circuit voltage (VOC) and the higher fill factor (FF). The ZnO:Ga film being more stable in hydrogen plasma than its SnO2 counterpart, maintains a high transparency to the solar radiation and improves the VOC, while reduced diffusion of Zn across the p-layer creates less defects at the p-i interface in Si:H cells and thereby, increases the FF. Nearly identical conversion efficiency is preserved for both TCO substrates. Excellent c-axis orientation even at low growth temperature promises improved device performance by extended parametric optimization.

The long road to employment: Incivility experienced by job seekers.

PubMed

Ali, Abdifatah A; Ryan, Ann Marie; Lyons, Brent J; Ehrhart, Mark G; Wessel, Jennifer L

2016-03-01

This study addresses how job seekers' experiences of rude and discourteous treatment--incivility--can adversely affect self-regulatory processes underlying job searching. Using the social-cognitive model (Zimmerman, 2000), we integrate social-cognitive theory with the goal orientation literature to examine how job search self-efficacy mediates the relationship between incivility and job search behaviors and how individual differences in learning goal orientation and avoid-performance goal orientation moderate that process. We conducted 3 studies with diverse methods and samples. Study 1 employed a mixed-method design to understand the nature of incivility within the job search context and highlight the role of attributions in linking incivility to subsequent job search motivation and behavior. We tested our hypotheses in Study 2 and 3 employing time-lagged research designs with unemployed job seekers and new labor market entrants. Across both Study 2 and 3 we found evidence that the negative effect of incivility on job search self-efficacy and subsequent job search behaviors are stronger for individuals low, rather than high, in avoid-performance goal orientation. Theoretical implications of our findings and practical recommendations for how to address the influence of incivility on job seeking are discussed. (c) 2016 APA, all rights reserved).

Dynamics and Statics of Nonaxisymmetric Liquid Bridges

NASA Technical Reports Server (NTRS)

Alexander, J. Iwan D.; Resnick, Andrew H.; Slobozhanin, L. A.

1996-01-01

Theoretical and experimental investigation of the stability of nonaxisymmetric and nonaxisymmetric bridges contained between equal and unequal radii disks as a function of Bond and Weber number with emphasis on the transition from unstable axisymmetric to stable nonaxisymmetric shapes, are conducted. Numerical analysis of the stability of nonaxisymmetric bridges between unequal disks for various orientations of the gravity vector is performed. Experimental and theoretical investigation of large (nonaxisymmetric) oscillations and breaking of liquid bridges are also conducted.

Gender expression, sexual orientation and pain sensitivity in women.

PubMed

Vigil, Jacob M; Rowell, Lauren N; Lutz, Charlotte

2014-01-01

Despite a growing body of literature investigating sex differences with regard to pain, surprisingly little research has been conducted on the influence of various aspects of self-identity, including gender expression and sexual orientation, on pain sensitivity within each sex, particularly among women. In men, dispositional femininity is linked to greater clinical pain and trait masculinity is associated with higher pain thresholds. To examine whether gender expression and sexual orientation are associated with within-sex differences in ischemic pain sensitivity in healthy young women. A convenience sample of 172 females (mean age 21.4 years; range 18 to 30 years of age; 56.0% white, 89% heterosexual) performed an ischemic pain task in counterbalanced order. Desired levels of dispositional femininity for a preferred romantic partner and self-described levels of personal dispositional femininity were measured. Compared with heterosexual women, lesbian and bisexual women reported lower pain intensity ratings early in the discomfort task. Irrespective of sexual orientation, attraction to more feminine romantic partners and dispositional masculinity were correlated with lower pain intensity, and with higher pain thresholds and tolerance levels. These preliminary findings suggest that within-sex differences in sexual orientation and other aspects of identity, irrespective of biological sex, may be important to consider when examining experimental pain performance and clinical pain experiences. Larger investigations of the psychophysiological relationships among sexual orientation, gender expression and pain sensitivity are warranted. These findings may have implications for differences in clinical pain sensitivity of lesbian and bisexual women compared with heterosexual women.

Alerting, orienting or executive attention networks: differential patters of pupil dilations

PubMed Central

Geva, Ronny; Zivan, Michal; Warsha, Aviv; Olchik, Dov

2013-01-01

Attention capacities, alerting responses, orienting to sensory stimulation, and executive monitoring of performance are considered independent yet interrelated systems. These operations play integral roles in regulating the behavior of diverse species along the evolutionary ladder. Each of the primary attention constructs—alerting, orienting, and executive monitoring—involves salient autonomic correlates as evidenced by changes in reactive pupil dilation (PD), heart rate, and skin conductance. Recent technological advances that use remote high-resolution recording may allow the discernment of temporo-spatial attributes of autonomic responses that characterize the alerting, orienting, and executive monitoring networks during free viewing, irrespective of voluntary performance. This may deepen the understanding of the roles of autonomic regulation in these mental operations and may deepen our understanding of behavioral changes in verbal as well as in non-verbal species. The aim of this study was to explore differences between psychosensory PD responses in alerting, orienting, and executive conflict monitoring tasks to generate estimates of concurrent locus coeruleus (LC) noradrenergic input trajectories in healthy human adults using the attention networks test (ANT). The analysis revealed a construct-specific pattern of pupil responses: alerting is characterized by an early component (Pa), its acceleration enables covert orienting, and executive control is evidenced by a prominent late component (Pe). PD characteristics seem to be task-sensitive, allowing exploration of mental operations irrespective of conscious voluntary responses. These data may facilitate development of studies designed to assess mental operations in diverse species using autonomic responses. PMID:24133422

Psychophysiological Studies in Extreme Environments

NASA Technical Reports Server (NTRS)

Toscano, William B.

2011-01-01

This paper reviews the results from two studies that employed the methodology of multiple converging indicators (physiological measures, subjective self-reports and performance metrics) to examine individual differences in the ability of humans to adapt and function in high stress environments. The first study was a joint collaboration between researchers at the US Army Research Laboratory (ARL) and NASA Ames Research Center. Twenty-four men and women active duty soldiers volunteered as participants. Field tests were conducted in the Command and Control Vehicle (C2V), an enclosed armored vehicle, designed to support both stationary and on-the-move operations. This vehicle contains four computer workstations where crew members are expected to perform command decisions in the field under combat conditions. The study objectives were: 1) to determine the incidence of motion sickness in the C2V relative to interior seat orientation/position, and parked, moving and short-haul test conditions; and 2) to determine the impact of the above conditions on cognitive performance, mood, and physiology. Data collected during field tests included heart rate, respiration rate, skin temperature, and skin conductance, self-reports of mood and symptoms, and cognitive performance metrics that included seven subtests in the DELTA performance test battery. Results showed that during 4-hour operational tests over varied terrain motion sickness symptoms increased; performance degraded by at least 5 percent; and physiological response profiles of individuals were categorized based on good and poor cognitive performance. No differences were observed relative to seating orientation or position.

The effect of parental education, prior achievement, self-efficacy, goal orientation, and effort on undergraduate science performance of Latinos and Caucasians

NASA Astrophysics Data System (ADS)

Stansbury, Sydney Lynn

Compared with majority students, underrepresented minorities have demonstrated weaker undergraduate science performance. Previous research has attributed the weaker performance to socioeconomic factors that influence poorer precollege preparation. Studies also have found that, compared with majority students, underrepresented minorities are less confident about their science skills and more interested in extrinsic rewards of science careers. Social Cognitive Theory posits that low self-efficacy coupled with high extrinsic goal orientation diminishes cognitive engagement, resulting in weak performance. Applying motivational characteristics of underrepresented minority students to a Social Cognitive Model may explain why their performance is weaker than that of Caucasians. Thus, the purpose of this study was to investigate the degree to which motivation variables account for the difference between underrepresented minority and majority students' undergraduate science performance. The study was conducted at a large, predominantly Caucasian, private university located in an urban setting in the Southwest. Two hundred twenty-two students--154 Caucasians and 68 Latinos--enrolled in a general chemistry course participated. Students were administered the Motivation for Learning Questionnaire, designed specifically for this study, consisting of scales measuring the following variables: ethnicity, level of parental education, and effort exertion; self-efficacy, effort regulation, intrinsic goal orientation, and extrinsic goal orientation, measures from the Motivated Strategies for Learning Questionnaire (Pintrich, Smith, Garcia, & McKeachie, 1991); and ability orientation, a measure from the Patterns of Adaptive Learning Survey (Midgley, Maehr, & Urdan, 1995). Financial aid information, chemistry and math placement test scores, and chemistry grades were obtained from other on-campus departments. Results demonstrated that the hypotheses were only partially confirmed by the model. Motivation variables did account for a portion of the variance in performance, but not in the ways predicted. Increasing the number of subjects in each group and adding the following variables to the model would clarify the role that motivation plays in performance: realistic self-appraisal; perceived competition; and elaboration, organization, and rehearsal strategies. Based on results, the following interventions were recommended to increase undergraduate science performance: assessment in realistic self-appraisal of science skills; instruction in elaboration and organization strategies; and encouragement of intrinsic interest in science.

Integration of altitude and airspeed information into a primary flight display via moving-tape formats: Evaluation during random tracking task

NASA Technical Reports Server (NTRS)

Abbott, Terence S.; Nataupsky, Mark; Steinmetz, George G.

1987-01-01

A ground-based aircraft simulation study was conducted to determine the effects on pilot preference and performance of integrating airspeed and altitude information into an advanced electronic primary flight display via moving-tape (linear moving scale) formats. Several key issues relating to the implementation of moving-tape formats were examined in this study: tape centering, tape orientation, and trend information. The factor of centering refers to whether the tape was centered about the actual airspeed or altitude or about some other defined reference value. Tape orientation refers to whether the represented values are arranged in descending or ascending order. Two pilots participated in this study, with each performing 32 runs along seemingly random, previously unknown flight profiles. The data taken, analyzed, and presented consisted of path performance parameters, pilot-control inputs, and electrical brain response measurements.

Application of Background Oriented Schlieren for Altitude Testing of Rocket Engines

NASA Technical Reports Server (NTRS)

Wernet, Mark P.; Stiegemeier, Benjamin R.

2017-01-01

A series of experiments was performed to determine the feasibility of using the Background Oriented Schlieren, BOS, flow visualization technique to image a simulated, small, rocket engine, plume under altitude test conditions. Testing was performed at the NASA Glenn Research Centers Altitude Combustion Stand, ACS, using nitrogen as the exhaust gas simulant. Due to limited optical access to the facility test capsule, all of the hardware required to conduct the BOS were located inside the vacuum chamber. During the test series 26 runs were performed using two different nozzle configurations with pressures in the test capsule around 0.3 psia. No problems were encountered during the test series resulting from the optical hardware being located in the test capsule and acceptable resolution images were captured. The test campaign demonstrated the ability of using the BOS technique for small, rocket engine, plume flow visualization during altitude testing.

Towards a characterization of a motive whose ultimate goal is to increase the welfare of the world: Quixoteism.

PubMed

Salgado, Sergio; Oceja, Luis

2011-05-01

We use the term Quixoteism to refer to a new social motive. The characterization of this motive deals with two aspects: the definition of the ultimate goal (i.e., to increase the welfare of the world) and the proposal of a process that activates it (i.e., a transcendental-change orientation). Three studies were conducted to test this characterization. In Study 1 we developed an empirical measure of the transcendental-change orientation. The participants in Studies 2 and 3 were presented with a need situation. Results showed that the centrality of such an orientation was directly related to an interpretation consistent with the ultimate goal of Quixoteism (Study 2), and that its salience increases the likelihood of performing a high-cost prosocial behavior (Study 3).

Orienting semi-conducting π-conjugated polymers.

PubMed

Brinkmann, Martin; Hartmann, Lucia; Biniek, Laure; Tremel, Kim; Kayunkid, Navaphun

2014-01-01

The present review focuses on the recent progress made in thin film orientation of semi-conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3-alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi-conducting polymers can generate a large palette of semi-crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Training to Improve New Product Sales Performance: The Case of Samsung in China

ERIC Educational Resources Information Center

Fu, Frank Q.; Yi, Hong; Zhai, Nanji

2013-01-01

The authors report a case study conducted with over 8,000 Samsung salespeople in the Chinese market. Using research-oriented, evidence-based, and systematic approaches, training professionals contributed to Samsung's business outcomes at multiple levels. The case highlights the valuable impacts of training on salespeople's behaviors and new…

The effects of film thickness on the electrical, optical, and structural properties of cylindrical, rotating, magnetron-sputtered ITO films

NASA Astrophysics Data System (ADS)

Kim, Jae-Ho; Seong, Tae-Yeon; Ahn, Kyung-Jun; Chung, Kwun-Bum; Seok, Hae-Jun; Seo, Hyeong-Jin; Kim, Han-Ki

2018-05-01

We report the characteristics of Sn-doped In2O3 (ITO) films intended for use as transparent conducting electrodes; the films were prepared via a five-generation, in-line type, cylindrical, rotating magnetron sputtering (CRMS) system as a function of film thickness. By using a rotating cylindrical ITO target with high usage (∼80%), we prepared high conductivity, transparent ITO films on five-generation size glass. The effects of film thickness on the electrical, optical, morphological, and structural properties of CRMS-grown ITO films are investigated in detail to correlate the thickness and performance of ITO films. The preferred orientation changed from the (2 2 2) to the (4 0 0) plane with increasing thickness of ITO is attributed to the stability of the (4 0 0) plane against resputtering during the CRMS process. Based on X-ray diffraction, surface field emission scanning electron microscopy, and cross-sectional transmission electron microscopy, we suggest a possible mechanism to explain the preferred orientation and effects of film thickness on the performance of CRMS-grown ITO films.

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands.

PubMed

Hagemann, Vera; Kluge, Annette

2017-01-01

Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes), the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high ( n = 58) or low ( n = 58) collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes such as coordination within the team. The results are discussed in relation to previous empirical findings and to learning processes within the team with a focus on feedback strategies.

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands

PubMed Central

Hagemann, Vera; Kluge, Annette

2017-01-01

Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes), the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high (n = 58) or low (n = 58) collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes such as coordination within the team. The results are discussed in relation to previous empirical findings and to learning processes within the team with a focus on feedback strategies. PMID:29033886

Oriented MOF-polymer Composite Nanofiber Membranes for High Proton Conductivity at High Temperature and Anhydrous Condition

PubMed Central

Wu, Bin; Pan, Jiefeng; Ge, Liang; Wu, Liang; Wang, Huanting; Xu, Tongwen

2014-01-01

The novel oriented electrospun nanofiber membrane composed of MOFs and SPPESK has been synthesized for proton exchange membrane fuel cell operating at high temperature and anhydrous conditions. It is clear that the oriented nanofiber membrane displays the higher proton conductivity than that of the disordered nanofiber membrane or the membrane prepared by conventional solvent-casting method (without nanofibers). Nanofibers within the membranes are significantly oriented. The proton conductivity of the oriented nanofiber membrane can reach up to (8.2 ± 0.16) × 10−2 S cm−1 at 160°C under anhydrous condition for the highly orientation of nanofibers. Moreover, the oxidative stability and resistance of methanol permeability of the nanofibers membrane are obviously improved with an increase in orientation of nanofibers. The observed methanol permeability of 0.707 × 10−7 cm2 s−1 is about 6% of Nafion-115. Consequently, orientated nanofibers membrane is proved to be a promising material as the proton exchange membrane for potential application in direct methanol fuel cells. PMID:25082522

Effect of electric field induced alignment and dispersion of functionalized carbon nanotubes on properties of natural rubber

NASA Astrophysics Data System (ADS)

Gao, Jiangshan; He, Yan; Gong, Xiubin

2018-06-01

The original equipment and method for orienting multi-walled carbon nanotubes (MWCNTs) in natural rubber (NR) by alternating current (AC) electric field were reported in the present study. MWCNTs with various volume fractions were dispersed in the mixture latex which composed of natural rubber, additives and methylbenzene. The application of AC electric field during nanocomposites curing process was used to induce the formation of aligned conductive nanotube networks between the electrodes. The aligned MWCNTs in the composites have a better orientation performance and dispersion quality than these of random MWCNTs by analyzing TEM and SEM images. The effects of MWCNTs anisotropy on thermal conductivity, dielectric properties, and dynamic mechanical properties of NR were studied. The mean value of thermal conductivity of composites loading with aligned MWCNTs was 8.67% higher than that of composites with random MWCNTs due to the anisotropy of aligned MWCNTs. The compounds with aligned MWCNTs possessed low dielectric constant, loss tangents and conductivity, namely a good insulativity. The compounds loading with aligned MWCNTs had lower loss modulus and better dynamic mechanical properties than those with random MWCNTs. This method can make full use of the high thermal conductivity of MWCNTs axis, and expand the application areas of natural rubber like conducting heat in a certain direction with a high efficiency.

Evaluating the evidence for motor-based interventions in developmental coordination disorder: A systematic review and meta-analysis.

PubMed

Smits-Engelsman, Bouwien; Vinçon, Sabine; Blank, Rainer; Quadrado, Virgínia H; Polatajko, Helene; Wilson, Peter H

2018-03-01

As part of the process of creating an update of the clinical practice guidelines for developmental coordination disorder (DCD) (Blank, Smits-Engelsman, Polatajko, & Wilson, 2012), a systematic review of intervention studies, published since the last guidelines statement was conducted. The aim of this study was to 1) systematically review the evidence published from January 2012 to February 2017 regarding the effectiveness of motor based interventions in individuals with DCD, 2) quantify treatment effects using a meta-analysis, 3) examine the available information on different aspects of delivery including use of group intervention, duration and frequency of therapy, and 4) identify gaps in the literature and make recommendations for future intervention research. An electronic search of 5 databases (PubMed, Embase, Pedro, Scopus and Cochrane) was conducted for studies that evaluated motor-based interventions to improve performance for individuals with DCD. Thirty studies covering 25 datasets were included, 19 of which provided outcomes on standardized measures of motor performance. The overall effect size (Cohen's d) across intervention studies was large (1.06), but the range was wide: for 11 interventions, the observed effect was large (>0.80), in eight studies moderate (>0.50), and in five it was small or negligible (<0.50). Positive benefits were evident for activity-oriented approaches, body function-oriented combined with activities, active video games, and small group programs. Results showed that activity-oriented and body function oriented interventions can have a positive effect on motor function and skills. However, given the varied methodological quality and the large confidence intervals of some studies, the results should be interpreted with caution. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effect of Trap Color, Height, and Orientation on the Capture of Yellow and Stick Tea Thrips (Thysanoptera: Thripidae) and Nontarget Insects in Tea Gardens.

PubMed

Bian, L; Yang, P X; Yao, Y J; Luo, Z X; Cai, X M; Chen, Z M

2016-02-03

Two thrips species-the yellow tea thrips (Scirtothrips dorsalis Hood) and the stick tea thrips (Dendrothrips minowai Priesner)-are serious pests affecting tea plants in southern China. Although the stick tea thrips is primarily restricted to southern China, the yellow tea thrips is gradually proliferating worldwide. Colored sticky card traps may be useful for monitoring and capturing these species, but a systematic analysis has not been conducted to identify the most effective trap color, height, and orientation. We performed indoor experiments using an orthogonal experimental design, as well as field tests in tea gardens, to identify the color most attractive to the two thrips species. Field tests were then conducted using color-optimized traps-lawngreen (RGB: 124, 252, 0) for yellow thrips and lime (RGB: 0, 255, 0) for stick tea thrips-to determine the most effective trap height and orientation. The greatest numbers of both yellow and stick tea thrips were captured on traps positioned 0-20 cm above the tea canopy in an east-west orientation. We also evaluated the performance of the color-optimized sticky card traps compared with commercially available yellow ones. Significantly more yellow and stick tea thrips and fewer natural enemies were captured on the color-optimized traps than on commercial ones. Although additional research is needed to explain the responses of the two different species and to increase trap effectiveness, our findings should assist in the control of these harmful insects. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Self-regulation: from goal orientation to job performance.

PubMed

Porath, Christine L; Bateman, Thomas S

2006-01-01

The authors investigated the effects on job performance of 3 forms of goal orientation and 4 self-regulation (SR) tactics. In a longitudinal field study with salespeople, learning and performance-prove goal orientation predicted subsequent sales performance, whereas performance-avoid goal orientation negatively predicted sales performance. The SR tactics functioned as mediating variables between learning and performance-prove goal orientations and performance. Social competence and proactive behavior directly and positively predicted sales performance, and emotional control negatively predicted performance. (c) 2006 APA, all rights reserved.

Effects of asymmetric rolling process on ridging resistance of ultra-purified 17%Cr ferritic stainless steel

NASA Astrophysics Data System (ADS)

Lu, Cheng-zhuang; Li, Jing-yuan; Fang, Zhi

2018-02-01

In ferritic stainless steels, a significant non-uniform recrystallization orientation and a substantial texture gradient usually occur, which can degrade the ridging resistance of the final sheets. To improve the homogeneity of the recrystallization orientation and reduce the texture gradient in ultra-purified 17%Cr ferritic stainless steel, in this work, we performed conventional and asymmetric rolling processes and conducted macro and micro-texture analyses to investigate texture evolution under different cold-rolling conditions. In the conventional rolling specimens, we observed that the deformation was not uniform in the thickness direction, whereas there was homogeneous shear deformation in the asymmetric rolling specimens as well as the formation of uniform recrystallized grains and random orientation grains in the final annealing sheets. As such, the ridging resistance of the final sheets was significantly improved by employing the asymmetric rolling process. This result indicates with certainty that the texture gradient and orientation inhomogeneity can be attributed to non-uniform deformation, whereas the uniform orientation gradient in the thickness direction is explained by the increased number of shear bands obtained in the asymmetric rolling process.

Indirect Measurement of Sexual Orientation: Comparison of the Implicit Relational Assessment Procedure, Viewing Time, and Choice Reaction Time Tasks.

PubMed

Rönspies, Jelena; Schmidt, Alexander F; Melnikova, Anna; Krumova, Rosina; Zolfagari, Asadeh; Banse, Rainer

2015-07-01

The present study was conducted to validate an adaptation of the Implicit Relational Assessment Procedure (IRAP) as an indirect latency-based measure of sexual orientation. Furthermore, reliability and criterion validity of the IRAP were compared to two established indirect measures of sexual orientation: a Choice Reaction Time task (CRT) and a Viewing Time (VT) task. A sample of 87 heterosexual and 35 gay men completed all three indirect measures in an online study. The IRAP and the VT predicted sexual orientation nearly perfectly. Both measures also showed a considerable amount of convergent validity. Reliabilities (internal consistencies) reached satisfactory levels. In contrast, the CRT did not tap into sexual orientation in the present study. In sum, the VT measure performed best, with the IRAP showing only slightly lower reliability and criterion validity, whereas the CRT did not yield any evidence of reliability or criterion validity in the present research. The results were discussed in the light of specific task properties of the indirect latency-based measures (task-relevance vs. task-irrelevance).

Measuring sexual orientation in adolescent health surveys: evaluation of eight school-based surveys.

PubMed

Saewyc, Elizabeth M; Bauer, Greta R; Skay, Carol L; Bearinger, Linda H; Resnick, Michael D; Reis, Elizabeth; Murphy, Aileen

2004-10-01

To examine the performance of various items measuring sexual orientation within 8 school-based adolescent health surveys in the United States and Canada from 1986 through 1999. Analyses examined nonresponse and unsure responses to sexual orientation items compared with other survey items, demographic differences in responses, tests for response set bias, and congruence of responses to multiple orientation items; analytical methods included frequencies, contingency tables with Chi-square, and ANOVA with least significant differences (LSD)post hoc tests; all analyses were conducted separately by gender. In all surveys, nonresponse rates for orientation questions were similar to other sexual questions, but not higher; younger students, immigrants, and students with learning disabilities were more likely to skip items or select "unsure." Sexual behavior items had the lowest nonresponse, but fewer than half of all students reported sexual behavior, limiting its usefulness for indicating orientation. Item placement in the survey, wording, and response set bias all appeared to influence nonresponse and unsure rates. Specific recommendations include standardizing wording across future surveys, and pilot testing items with diverse ages and ethnic groups of teens before use. All three dimensions of orientation should be assessed where possible; when limited to single items, sexual attraction may be the best choice. Specific wording suggestions are offered for future surveys.

Factors influencing transitional care from adolescents to young adults with cancer in Taiwan: A population-based study.

PubMed

Jin, Yo-Ting; Chen, Chin-Mi; Chien, Wu-Chien

2016-08-02

To investigate the progress of transition from paediatric to adult health care for patients with cancer in Taiwan's medical system. The data were retrieved from the Longitudinal Health Insurance Database (LHID), which contains the original inpatient and outpatient medical claims data for 1,000,000 enrollees randomly sampled from the NHIRD between 1997 and 2010. Among the 1,411 cancer patients selected for this study, 98.09 % received adult-oriented therapy before the age of 18. In addition, only 1.91 % of the patients received paediatric-oriented therapy during adolescence. The primary factors that determine whether these patients would receive paediatric-oriented therapy or adult-oriented therapy at an early age were as follows: the age of the patient at the first visit and the performance-level of the hospital (p < 0.001). Previous studies conducted in developed countries have demonstrated that the unwillingness of patients to switch from paediatric-oriented therapy to adult-oriented therapy being the major obstacle that hinders the transition process. However, this study revealed a different result: the implementation of the National Health Insurance system in Taiwan makes healthcare affordable for the adolescent patients who may not possess adequate knowledge about paediatric health care and may not appreciate paediatric-oriented therapy, thereby hindering the transition process.

Transport properties of olivine grain boundaries from electrical conductivity experiments

NASA Astrophysics Data System (ADS)

Pommier, Anne; Kohlstedt, David L.; Hansen, Lars N.; Mackwell, Stephen; Tasaka, Miki; Heidelbach, Florian; Leinenweber, Kurt

2018-05-01

Grain boundary processes contribute significantly to electronic and ionic transports in materials within Earth's interior. We report a novel experimental study of grain boundary conductivity in highly strained olivine aggregates that demonstrates the importance of misorientation angle between adjacent grains on aggregate transport properties. We performed electrical conductivity measurements of melt-free polycrystalline olivine (Fo90) samples that had been previously deformed at 1200 °C and 0.3 GPa to shear strains up to γ = 7.3. The electrical conductivity and anisotropy were measured at 2.8 GPa over the temperature range 700-1400 °C. We observed that (1) the electrical conductivity of samples with a small grain size (3-6 µm) and strong crystallographic preferred orientation produced by dynamic recrystallization during large-strain shear deformation is a factor of 10 or more larger than that measured on coarse-grained samples, (2) the sample deformed to the highest strain is the most conductive even though it does not have the smallest grain size, and (3) conductivity is up to a factor of 4 larger in the direction of shear than normal to the shear plane. Based on these results combined with electrical conductivity data for coarse-grained, polycrystalline olivine and for single crystals, we propose that the electrical conductivity of our fine-grained samples is dominated by grain boundary paths. In addition, the electrical anisotropy results from preferential alignment of higher-conductivity grain boundaries associated with the development of a strong crystallographic preferred orientation of the grains.

Do neurocognitive deficits in decision making differentiate conduct disorder subtypes?

PubMed

Fanti, Kostas A; Kimonis, Eva R; Hadjicharalambous, Maria-Zoe; Steinberg, Laurence

2016-09-01

The present study aimed to test whether neurocognitive deficits involved in decision making underlie subtypes of conduct-disorder (CD) differentiated on the basis of callous-unemotional (CU) traits. Eighty-five participants (M age = 10.94 years) were selected from a sample of 1200 children based on repeated assessment of CD and CU traits. Participants completed a multi-method battery of well-validated measures of risky decision making and associated constructs of selective attention and future orientation (Stroop, Stoplight, and Delay-Discounting Tasks). Findings indicated that impaired decision making, selective attention, and future orientation contribute to the antisocial presentations displayed by children with CD, irrespective of level of CU traits. Youth high on CU traits without CD showed less risky decision making, as indicated by their performance on the Stoplight laboratory task, than those high on both CD and CU traits, suggesting a potential protective factor against the development of antisocial behavior.

A quality approach for conducting training needs assessments in the Ministry of Health, State of Bahrain.

PubMed

Benjamin, S; al-Darazi, F

2000-01-01

In health care organizations around the world, Training Needs Assessments (TNAs) have generally followed a professions-based approach. For example, the training needs of doctors, nurses, each allied health profession, and distinct support staff have been analyzed separately--individualized TNAs conducted for each speciality and functional area. Although a professions-based TNA model can provide useful information to human resource development (HRD) professionals, there are two major drawbacks: (1) it is possible that important training needs might be overlooked because of lack of information sharing among professions and (2) such an approach does not encourage an interdisciplinary, team orientation to service provision. This paper proposes an improved method of conceptualizing TNAs, using an approach that builds on the quality management literature (TQM, CQI, etc.) which stresses the importance of customer- and service-orientations to organizing and measuring organizational and individual performance.

Correlation between academic achievement goal orientation and the performance of Malaysian students in an Indian medical school.

PubMed

Barkur, Rajashekar Rao; Govindan, Sreejith; Kamath, Asha

2013-01-01

According to goal orientation theory, achievement goals are defined as the terminal point towards which one's efforts are directed. The four academic achievement goal orientations commonly recognised are mastery, performance approach, performance avoidance and work avoidance. The objective of this study was to understand the goal orientation of second year undergraduate medical students and how this correlates with their academic performance. The study population consisted of 244 second year Bachelor of Medicine and Bachelor of Surgery (MBBS) students of Melaka Manipal Medical College, Manipal campus, Manipal University, India. Students were categorised as high performers and low performers based on their first year university examination marks. Their goal orientations were assessed through a validated questionnaire developed by Was et al. These components were analysed by independent sample t-test and correlated to their first year university examination marks. Confirmatory component factor analysis extracted four factors, which accounted for 40.8% of the total variance in goal orientation. The performance approach goal orientation alone explained 16.7% of the variance followed by mastery (10.8%), performance avoidance (7.7%) and work avoidance (5.7%). The Cronbach's alpha for 19 items, which contributed to internal consistency of the tool, was observed to be 0.635. A strong positive correlation was shown between performance approach, performance avoidance and work avoidance orientations. Of the four goal orientations, only the mean scores in work avoidance orientation differed for low performers and high performers (5.0 vs. 4.3; P = 0.0003). Work avoidance type of goal orientation among the low performer group may account for their lower performance compared with high performer group. This indicates that academic achievement goal orientation may play a role in the performance of undergraduate medical students.

Personal and Social Responsibility among Athletes: the Role of Self-Determination, Achievement Goals and Engagement

PubMed Central

Martins, Paulo; Rosado, António; Ferreira, Vítor; Biscaia, Rui

2017-01-01

Abstract The purpose of this study was to assess the relationship between motivation, engagement and personal and social responsibility among athletes. Based on the literature, a survey was conducted including measures of motivation, considering task orientation and ego orientation, intrinsic and extrinsic motivation, and amotivation. We also measured the components of engagement (dedication, confidence, vigor and enthusiasm) and the components of personal and social responsibility. A total of 517 athletes from different types of sports participated in the study. The results gathered through a structural equation model revealed that task orientation had the strongest relationship with personal responsibility and social responsibility, followed by engagement. Self-determination levels were not associated with personal and social responsibility. These results suggest that monitoring of task orientation and engagement levels should be performed by coaches as a strategy to develop personal and social responsibility among their athletes. Moreover, findings from this study provide scholars with a tool to aid them in managing athletes’ levels of personal and social responsibility. PMID:28713457

Personal and Social Responsibility among Athletes: the Role of Self-Determination, Achievement Goals and Engagement.

PubMed

Martins, Paulo; Rosado, António; Ferreira, Vítor; Biscaia, Rui

2017-06-01

The purpose of this study was to assess the relationship between motivation, engagement and personal and social responsibility among athletes. Based on the literature, a survey was conducted including measures of motivation, considering task orientation and ego orientation, intrinsic and extrinsic motivation, and amotivation. We also measured the components of engagement (dedication, confidence, vigor and enthusiasm) and the components of personal and social responsibility. A total of 517 athletes from different types of sports participated in the study. The results gathered through a structural equation model revealed that task orientation had the strongest relationship with personal responsibility and social responsibility, followed by engagement. Self-determination levels were not associated with personal and social responsibility. These results suggest that monitoring of task orientation and engagement levels should be performed by coaches as a strategy to develop personal and social responsibility among their athletes. Moreover, findings from this study provide scholars with a tool to aid them in managing athletes' levels of personal and social responsibility.

Teacher Educators as Researchers: A Profile of Research in Israeli Teacher Colleges Versus University Departments of Education

ERIC Educational Resources Information Center

Yogev, Sima; Yogev, Abraham

2006-01-01

The teacher research movement has encouraged the development of "practitioner research" action-oriented and reflective studies among teachers and teacher educators alike. This study compares the profile of research conducted in the Israeli academic teacher colleges with that performed by university faculty. A content analysis of the 204…

Sensitivity of planetary cruise navigation to earth orientation calibration errors

NASA Technical Reports Server (NTRS)

Estefan, J. A.; Folkner, W. M.

1995-01-01

A detailed analysis was conducted to determine the sensitivity of spacecraft navigation errors to the accuracy and timeliness of Earth orientation calibrations. Analyses based on simulated X-band (8.4-GHz) Doppler and ranging measurements acquired during the interplanetary cruise segment of the Mars Pathfinder heliocentric trajectory were completed for the nominal trajectory design and for an alternative trajectory with a longer transit time. Several error models were developed to characterize the effect of Earth orientation on navigational accuracy based on current and anticipated Deep Space Network calibration strategies. The navigational sensitivity of Mars Pathfinder to calibration errors in Earth orientation was computed for each candidate calibration strategy with the Earth orientation parameters included as estimated parameters in the navigation solution. In these cases, the calibration errors contributed 23 to 58% of the total navigation error budget, depending on the calibration strategy being assessed. Navigation sensitivity calculations were also performed for cases in which Earth orientation calibration errors were not adjusted in the navigation solution. In these cases, Earth orientation calibration errors contributed from 26 to as much as 227% of the total navigation error budget. The final analysis suggests that, not only is the method used to calibrate Earth orientation vitally important for precision navigation of Mars Pathfinder, but perhaps equally important is the method for inclusion of the calibration errors in the navigation solutions.

Geo-electrical and geological strikes of the Mount Lamongan geothermal area, East Java, Indonesia – preliminary results

NASA Astrophysics Data System (ADS)

Nugraheni, L. R.; Niasari, S. W.; Nukman, M.

2018-04-01

Geothermal manifestations located in the Tiris, Mount Lamongan, Probolinggo, consist of warm springs. These warm springs have temperature from 35° until 45°C. Tiris fault has NW-SE dominant orientation, similar to some lineaments of maars and cinder cones around Mount Lamongan. The Mount Lamongan geothermal area is situated between Bromo and Argapura volcanoes. This study aims to map the geo-electrical and geological strikes in the study area. Phase tensor analysis has been performed in this study to determine geo-electrical strike of study area. Geological field campaign has been conducted to measure geological strikes. Then, orientation of geo-electrical strike was compared to geological strike. The result presents that the regional geological strike of study area is NW-SE while the orientation of geo-electrical strike is N-S.

Gender expression, sexual orientation and pain sensitivity in women

PubMed Central

Vigil, Jacob M; Rowell, Lauren N; Lutz, Charlotte

2014-01-01

BACKGROUND: Despite a growing body of literature investigating sex differences with regard to pain, surprisingly little research has been conducted on the influence of various aspects of self-identity, including gender expression and sexual orientation, on pain sensitivity within each sex, particularly among women. In men, dispositional femininity is linked to greater clinical pain and trait masculinity is associated with higher pain thresholds. OBJECTIVES: To examine whether gender expression and sexual orientation are associated with within-sex differences in ischemic pain sensitivity in healthy young women. METHODS: A convenience sample of 172 females (mean age 21.4 years; range 18 to 30 years of age; 56.0% white, 89% heterosexual) performed an ischemic pain task in counterbalanced order. Desired levels of dispositional femininity for a preferred romantic partner and self-described levels of personal dispositional femininity were measured. RESULTS: Compared with heterosexual women, lesbian and bisexual women reported lower pain intensity ratings early in the discomfort task. Irrespective of sexual orientation, attraction to more feminine romantic partners and dispositional masculinity were correlated with lower pain intensity, and with higher pain thresholds and tolerance levels. DISCUSSION: These preliminary findings suggest that within-sex differences in sexual orientation and other aspects of identity, irrespective of biological sex, may be important to consider when examining experimental pain performance and clinical pain experiences. CONCLUSION: Larger investigations of the psychophysiological relationships among sexual orientation, gender expression and pain sensitivity are warranted. These findings may have implications for differences in clinical pain sensitivity of lesbian and bisexual women compared with heterosexual women. PMID:24575419

Design considerations for a Space Shuttle Main Engine turbine blade made of single crystal material

NASA Technical Reports Server (NTRS)

Abdul-Aziz, A.; August, R.; Nagpal, V.

1993-01-01

Nonlinear finite-element structural analyses were performed on the first stage high-pressure fuel turbopump blade of the Space Shuttle Main Engine. The analyses examined the structural response and the dynamic characteristics at typical operating conditions. Single crystal material PWA-1480 was considered for the analyses. Structural response and the blade natural frequencies with respect to the crystal orientation were investigated. The analyses were conducted based on typical test stand engine cycle. Influence of combined thermal, aerodynamic, and centrifugal loadings was considered. Results obtained showed that the single crystal secondary orientation effects on the maximum principal stresses are not highly significant.

Leadership = Communication? The Relations of Leaders' Communication Styles with Leadership Styles, Knowledge Sharing and Leadership Outcomes.

PubMed

de Vries, Reinout E; Bakker-Pieper, Angelique; Oostenveld, Wyneke

2010-09-01

PURPOSE: The purpose of this study was to investigate the relations between leaders' communication styles and charismatic leadership, human-oriented leadership (leader's consideration), task-oriented leadership (leader's initiating structure), and leadership outcomes. METHODOLOGY: A survey was conducted among 279 employees of a governmental organization. The following six main communication styles were operationalized: verbal aggressiveness, expressiveness, preciseness, assuredness, supportiveness, and argumentativeness. Regression analyses were employed to test three main hypotheses. FINDINGS: In line with expectations, the study showed that charismatic and human-oriented leadership are mainly communicative, while task-oriented leadership is significantly less communicative. The communication styles were strongly and differentially related to knowledge sharing behaviors, perceived leader performance, satisfaction with the leader, and subordinate's team commitment. Multiple regression analyses showed that the leadership styles mediated the relations between the communication styles and leadership outcomes. However, leader's preciseness explained variance in perceived leader performance and satisfaction with the leader above and beyond the leadership style variables. IMPLICATIONS: This study offers potentially invaluable input for leadership training programs by showing the importance of leader's supportiveness, assuredness, and preciseness when communicating with subordinates. ORIGINALITY/VALUE: Although one of the core elements of leadership is interpersonal communication, this study is one of the first to use a comprehensive communication styles instrument in the study of leadership.

Interwoven Aligned Conductive Nanofiber Yarn/Hydrogel Composite Scaffolds for Engineered 3D Cardiac Anisotropy.

PubMed

Wu, Yaobin; Wang, Ling; Guo, Baolin; Ma, Peter X

2017-06-27

Mimicking the anisotropic cardiac structure and guiding 3D cellular orientation play a critical role in designing scaffolds for cardiac tissue regeneration. Significant advances have been achieved to control cellular alignment and elongation, but it remains an ongoing challenge for engineering 3D cardiac anisotropy using these approaches. Here, we present a 3D hybrid scaffold based on aligned conductive nanofiber yarns network (NFYs-NET, composition: polycaprolactone, silk fibroin, and carbon nanotubes) within a hydrogel shell for mimicking the native cardiac tissue structure, and further demonstrate their great potential for engineering 3D cardiac anisotropy for cardiac tissue engineering. The NFYs-NET structures are shown to control cellular orientation and enhance cardiomyocytes (CMs) maturation. 3D hybrid scaffolds were then fabricated by encapsulating NFYs-NET layers within hydrogel shell, and these 3D scaffolds performed the ability to promote aligned and elongated CMs maturation on each layer and individually control cellular orientation on different layers in a 3D environment. Furthermore, endothelialized myocardium was constructed by using this hybrid strategy via the coculture of CMs on NFYs-NET layer and endothelial cells within hydrogel shell. Therefore, these 3D hybrid scaffolds, containing NFYs-NET layer inducing cellular orientation, maturation, and anisotropy and hydrogel shell providing a suitable 3D environment for endothelialization, has great potential in engineering 3D cardiac anisotropy.

Effect of filling ratio and orientation on the thermal performance of closed loop pulsating heat pipe using ethanol

NASA Astrophysics Data System (ADS)

Rahman, Md. Lutfor; Chowdhury, Mehrin; Islam, Nawshad Arslan; Mufti, Sayed Muhammad; Ali, Mohammad

2016-07-01

Pulsating heat pipe (PHP) is a new, promising yet ambiguous technology for effective heat transfer of microelectronic devices where heat is carried by the vapor plugs and liquid slugs of the working fluid. The aim of this research paper is to better understand the operation of PHP through experimental investigations and obtain comparative results for different parameters. A series of experiments are conducted on a closed loop PHP (CLPHP) with 8 loops made of copper capillary tube of 2 mm inner diameter. Ethanol is taken as the working fluid. The operating characteristics are studied for the variation of heat input, filling ratio (FR) and orientation. The filling ratios are 40%, 50%, 60% and 70% based on its total volume. The orientations are 0° (vertical), 30°, 45° and 60°. The results clearly demonstrate the effect of filling ratio and inclination angle on the performance, operational stability and heat transfer capability of ethanol as working fluid of CLPHP. Important insight of the operational characteristics of CLPHP is obtained and optimum performance of CLPHP using ethanol is thus identified. Ethanol works best at 50-60%FR at wide range of heat inputs. At very low heat inputs, 40%FR can be used for attaining a good performance. Filling ratio below 40%FR is not suitable for using in CLPHP as it gives a low performance. The optimum performance of the device can be obtained at vertical position.

Neuroscience Investigations: An Overview of Studies Conducted

NASA Technical Reports Server (NTRS)

Reschke, Millard F.

1999-01-01

The neural processes that mediate human spatial orientation and adaptive changes occurring in response to the sensory rearrangement encountered during orbital flight are primarily studied through second and third order responses. In the Extended Duration Orbiter Medical Project (EDOMP) neuroscience investigations, the following were measured: (1) eye movements during acquisition of either static or moving visual targets, (2) postural and locomotor responses provoked by unexpected movement of the support surface, changes in the interaction of visual, proprioceptive, and vestibular information, changes in the major postural muscles via descending pathways, or changes in locomotor pathways, and (3) verbal reports of perceived self-orientation and self-motion which enhance and complement conclusions drawn from the analysis of oculomotor, postural, and locomotor responses. In spaceflight operations, spatial orientation can be defined as situational awareness, where crew member perception of attitude, position, or motion of the spacecraft or other objects in three-dimensional space, including orientation of one's own body, is congruent with actual physical events. Perception of spatial orientation is determined by integrating information from several sensory modalities. This involves higher levels of processing within the central nervous system that control eye movements, locomotion, and stable posture. Spaceflight operational problems occur when responses to the incorrectly perceived spatial orientation are compensatory in nature. Neuroscience investigations were conducted in conjunction with U. S. Space Shuttle flights to evaluate possible changes in the ability of an astronaut to land the Shuttle or effectively perform an emergency post-landing egress following microgravity adaptation during space flights of variable length. While the results of various sensory motor and spatial orientation tests could have an impact on future space flights, our knowledge of sensorimotor adaptation to spaceflight is limited, and the future application of effective countermeasures depends, in large part, on the results from appropriate neuroscience investigations. Therefore, the objective of the neuroscience investigations could have a negative effect on mission success. The Neuroscience Laboratory, Johnson Space Center (JSC), implemented three integrated Detailed Supplementary Objectives (DSO) designed to investigate spatial orientation and the associated compensatory responses as a part of the EDOMP. The four primary goals were (1) to establish a normative database of vestibular and associated sensory changes in response to spaceflight, (2) to determine the underlying etiology of neurovestibular and sensory motor changes associated with exposure to microgravity and the subsequent return to Earth, (3) to provide immediate feedback to spaceflight crews regarding potential countermeasures that could improve performance and safety during and after flight, and (4) to take under consideration appropriate designs for preflight, in-flight, and postflight countermeasures that could be implemented for future flights.

Microscopic vertical orientation of nano-interspaced graphene architectures in deposit films as electrodes for enhanced supercapacitor performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jang, Gyoung Gug; Song, Bo; Li, Liyi

This paper reported a novel two-step process to fabricate high-performance supercapacitor films that contain microscale domains of nano-interspaced, re-stacked graphene sheets oriented perpendicular to the surface of current collector substrate, i.e., carbon fiber paper. In the two-step process, we first used ligand molecules to modify the surface of graphene oxide (GO) sheets and manipulate the interspacing between the re-stacked GO sheets. The ligand-modified GOs, i.e., m-GOs, were then reduced to obtain more conductive graphene (m-rGO), where X-ray diffraction measurement results indicated well-controlled interlayer spacing between the restacked m-rGO sheets up to 1 nm. The typical lateral dimension of the restackedmore » m-rGO sheets were ~40 µm. Then, electrical field was introduced during m-rGO slurry deposition process to induce the vertical orientation of the m-rGO sheets/stacks in the film deposit. The direct current electrical field induced the orientation of the domains of m-rGO stacks along the direction perpendicular to the surface of deposit film, i.e., direction of electric field. Also, the applied electric field increased the interlayer spacing further, which should enhance the diffusion and accessibility of electrolyte ions. As compared with the traditionally deposited “control” films, the field-processed film deposits that contain oriented structure of graphene sheets/stacks have shown up to ~1.6 times higher values in capacitance (430 F/g at 0.5 A/g) and ~67% reduction in equivalent series resistance. Finally, the approach of using electric field to tailor the microscopic architecture of graphene-based deposit films is effective to fabricate film electrodes for high performance supercapacitors.« less

Microscopic vertical orientation of nano-interspaced graphene architectures in deposit films as electrodes for enhanced supercapacitor performance

DOE PAGES

Jang, Gyoung Gug; Song, Bo; Li, Liyi; ...

2016-12-14

This paper reported a novel two-step process to fabricate high-performance supercapacitor films that contain microscale domains of nano-interspaced, re-stacked graphene sheets oriented perpendicular to the surface of current collector substrate, i.e., carbon fiber paper. In the two-step process, we first used ligand molecules to modify the surface of graphene oxide (GO) sheets and manipulate the interspacing between the re-stacked GO sheets. The ligand-modified GOs, i.e., m-GOs, were then reduced to obtain more conductive graphene (m-rGO), where X-ray diffraction measurement results indicated well-controlled interlayer spacing between the restacked m-rGO sheets up to 1 nm. The typical lateral dimension of the restackedmore » m-rGO sheets were ~40 µm. Then, electrical field was introduced during m-rGO slurry deposition process to induce the vertical orientation of the m-rGO sheets/stacks in the film deposit. The direct current electrical field induced the orientation of the domains of m-rGO stacks along the direction perpendicular to the surface of deposit film, i.e., direction of electric field. Also, the applied electric field increased the interlayer spacing further, which should enhance the diffusion and accessibility of electrolyte ions. As compared with the traditionally deposited “control” films, the field-processed film deposits that contain oriented structure of graphene sheets/stacks have shown up to ~1.6 times higher values in capacitance (430 F/g at 0.5 A/g) and ~67% reduction in equivalent series resistance. Finally, the approach of using electric field to tailor the microscopic architecture of graphene-based deposit films is effective to fabricate film electrodes for high performance supercapacitors.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lebedev, Oleg V.; N.S. Enikolopov Institute of Synthetic Polymer Materials of RAS, Profsoyuznaya st., Moscow, 117393; Kechek’yan, Alexander S.

Electrically conductive oriented polymer nano-composites of different compositions, based on the reactor powder of ultra-high-molecular-weight polyethylene (UHMWPE) with a special morphology, filled with particles of nanostructured graphite (NG), multi-walled carbon nanotubes (MWCNTs), and electrically conductive carbon black (CB), were investigated. Polymer composites were obtained via compaction of the mechanical mixture of the polymer and filler powder, followed by uniaxial deformation of the material under homogeneous shear (HS) conditions (all of the processing stages were conducted at room temperature). Resulted composites possess a high tensile strength, high level of the electrical conductivity and low percolation threshold, owing it to the formationmore » of the segregated conductive structure, The influence of the type of nanosized carbon filler, degree of the deformation under HS condition, temperature and etc. on the electrical conductivity and mechanical properties of strengthened conductive composites oriented under homogeneous shear conditions was investigated. Changes in the electrical conductivity of oriented composite materials during reversible “tension–shrinkage” cycles along the orientation axis direction were studied. A theoretical approach, describing the process of transformation of the conductive system as a response on polymer phase deformation and volume change, was proposed, based on the data received from the analysis of the conductivity behavior during the uniaxial deformation and thermal treatment of composites.« less

Goal orientation: effects on backing up behavior, performance, efficacy, and commitment in teams.

PubMed

Porter, Christopher O L H

2005-07-01

The author examined the predictive validity of goal orientation in teams on both team process and outcome variables. Results indicate that when mean goal orientation scores were used as a way of describing team members' inputs, learning orientation was related to backing up behavior, efficacy, and commitment. The relationships between performance orientation and efficacy and commitment, however, were more complex and were clarified when task performance was also taken into account. Performance orientation had a negative effect on efficacy when task performance was low and a positive effect on commitment when task performance was high. The implications of these findings for theory and research on goal orientation in teams and team staffing are discussed. Copyright 2005 APA, all rights reserved.

Multifunctional non-woven fabrics of interfused graphene fibres

PubMed Central

Li, Zheng; Xu, Zhen; Liu, Yingjun; Wang, Ran; Gao, Chao

2016-01-01

Carbon-based fibres hold promise for preparing multifunctional fabrics with electrical conductivity, thermal conductivity, permeability, flexibility and lightweight. However, these fabrics are of limited performance mainly because of the weak interaction between fibres. Here we report non-woven graphene fibre fabrics composed of randomly oriented and interfused graphene fibres with strong interfibre bonding. The all-graphene fabrics obtained through a wet-fusing assembly approach are porous and lightweight, showing high in-plane electrical conductivity up to ∼2.8 × 104 S m−1 and prominent thermal conductivity of ∼301.5 W m−1 K−1. Given the low density (0.22 g cm−3), their specific electrical and thermal conductivities set new records for carbon-based papers/fabrics and even surpass those of individual graphene fibres. The as-prepared fabrics are further used as ultrafast responding electrothermal heaters and durable oil-adsorbing felts, demonstrating their great potential as high-performance and multifunctional fabrics in real-world applications. PMID:27901022

The Potential of a Culturally Based Supplemental Mathematics Curriculum to Improve the Mathematics Performance of Alaska Native and Other Students

ERIC Educational Resources Information Center

Kisker, Ellen Eliason; Lipka, Jerry; Adams, Barbara L.; Rickard, Anthony; Andrew-Ihrke, Dora; Yanez, Eva Evelyn; Millard, Ann

2012-01-01

A randomized controlled trial conducted in Alaska examined the efficacy of 2 second-grade modules of the reform-oriented and culturally based Math in a Cultural Context (MCC) teacher training and curriculum. The results show that the "Picking Berries" (representing and measuring) and "Going to Egg Island" (grouping and place…

Cognitive and Affective Variables and Their Relationships to Performance in a Lotus 1-2-3 Class.

ERIC Educational Resources Information Center

Guster, Dennis; Batt, Richard

1989-01-01

Describes study of two-year college students that was conducted to determine whether variables that were predictors of success in a programing class were also predictors of success in a package-oriented computer class using Lotus 1-2-3. Diagraming skill, critical thinking ability, spatial discrimination, and test anxiety level were examined. (11…

The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes.

PubMed

Bin Hamzah, Hairul Hisham; Keattch, Oliver; Covill, Derek; Patel, Bhavik Anil

2018-06-14

Additive manufacturing also known as 3D printing is being utilised in electrochemistry to reproducibly develop complex geometries with conductive properties. In this study, we explored if the electrochemical behavior of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes was influenced by printing direction. The electrodes were printed in both horizontal and vertical directions. The horizsontal direction resulted in a smooth surface (HPSS electrode) and a comparatively rougher surface (HPRS electrode) surface. Electrodes were characterized using cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. For various redox couples, the vertical printed (VP) electrode showed enhanced current response when compared the two electrode surfaces generated by horizontal print direction. No differences in the capacitive response was observed, indicating that the conductive surface area of all types of electrodes were identical. The VP electrode had reduced charge transfer resistance and uncompensated solution resistance when compared to the HPSS and HPRS electrodes. Overall, electrodes printed in a vertical direction provide enhanced electrochemical performance and our study indicates that print orientation is a key factor that can be used to enhance sensor performance.

Porous yolk-shell microspheres as N-doped carbon matrix for motivating the oxygen reduction activity of oxygen evolution oriented materials.

PubMed

Zhou, Jinqiu; Wang, Mengfan; Qian, Tao; Liu, Sisi; Cao, Xuecheng; Yang, Tingzhou; Yang, Ruizhi; Yan, Chenglin

2017-09-08

It is highly challenging to explore high-performance bi-functional oxygen electrode catalysts for their practical application in next-generation energy storage and conversion devices. In this work, we synthesize hierarchical N-doped carbon microspheres with porous yolk-shell structure (NCYS) as a metal-free electrocatalyst toward efficient oxygen reduction through a template-free route. The enhanced oxygen reduction performances in both alkaline and acid media profit well from the porous yolk-shell structure as well as abundant nitrogen functional groups. Furthermore, such yolk-shell microspheres can be used as precursor materials to motivate the oxygen reduction activity of oxygen evolution oriented materials to obtain a desirable bi-functional electrocatalyst. To verify its practical utility, Zn-air battery tests are conducted and exhibit satisfactory performance, indicating that this constructed concept for preparation of bi-functional catalyst will afford a promising strategy for exploring novel metal-air battery electrocatalysts.

Porous yolk-shell microspheres as N-doped carbon matrix for motivating the oxygen reduction activity of oxygen evolution oriented materials

NASA Astrophysics Data System (ADS)

Zhou, Jinqiu; Wang, Mengfan; Qian, Tao; Liu, Sisi; Cao, Xuecheng; Yang, Tingzhou; Yang, Ruizhi; Yan, Chenglin

2017-09-01

It is highly challenging to explore high-performance bi-functional oxygen electrode catalysts for their practical application in next-generation energy storage and conversion devices. In this work, we synthesize hierarchical N-doped carbon microspheres with porous yolk-shell structure (NCYS) as a metal-free electrocatalyst toward efficient oxygen reduction through a template-free route. The enhanced oxygen reduction performances in both alkaline and acid media profit well from the porous yolk-shell structure as well as abundant nitrogen functional groups. Furthermore, such yolk-shell microspheres can be used as precursor materials to motivate the oxygen reduction activity of oxygen evolution oriented materials to obtain a desirable bi-functional electrocatalyst. To verify its practical utility, Zn-air battery tests are conducted and exhibit satisfactory performance, indicating that this constructed concept for preparation of bi-functional catalyst will afford a promising strategy for exploring novel metal-air battery electrocatalysts.

More than a checklist: a realist evaluation of supervision of mid-level health workers in rural Guatemala.

PubMed

Hernández, Alison R; Hurtig, Anna-Karin; Dahlblom, Kjerstin; San Sebastián, Miguel

2014-03-06

Mid-level health workers (MLHWs) form the front-line of service delivery in many low- and middle-income countries. Supervision is a critical institutional intervention linking their work to the health system, and it consists of activities intended to support health workers' motivation and enable them to perform. However its impact depends not only on the frequency of these activities but also how they are carried out and received. This study aims to deepen understanding of the mechanisms through which supervision activities support the performance of auxiliary nurses, a cadre of MLHWs, in rural Guatemala. A multiple case study was conducted to examine the operation of supervision of five health posts using a realist evaluation approach. A program theory was formulated describing local understanding of how supervision activities are intended to work. Data was collected through interviews and document review to test the theory. Analysis focused on comparison of activities, outcomes, mechanisms and the influence of context across cases, leading to revision of the program theory. The supervisor's orientation was identified as the main mechanism contributing to variation observed in activities and their outcomes. Managerial control was the dominant orientation, reflecting the influence of standardized performance criteria and institutional culture. Humanized support was present in one case where the auxiliary nurse was motivated by the sense that the full scope of her work was valued. This orientation reflected the supervisor's integration of her professional identity as a nurse. The nature of the support health workers received was shaped by supervisors' orientation, and in this study, nursing principles were central to humanized support. Efforts to strengthen the support that supervision provides to MLHWs should promote professional ethos as a means of developing shared performance goals and orient supervisors to a more holistic view of the health worker and their work.

More than a checklist: a realist evaluation of supervision of mid-level health workers in rural Guatemala

PubMed Central

2014-01-01

Background Mid-level health workers (MLHWs) form the front-line of service delivery in many low- and middle-income countries. Supervision is a critical institutional intervention linking their work to the health system, and it consists of activities intended to support health workers’ motivation and enable them to perform. However its impact depends not only on the frequency of these activities but also how they are carried out and received. This study aims to deepen understanding of the mechanisms through which supervision activities support the performance of auxiliary nurses, a cadre of MLHWs, in rural Guatemala. Methods A multiple case study was conducted to examine the operation of supervision of five health posts using a realist evaluation approach. A program theory was formulated describing local understanding of how supervision activities are intended to work. Data was collected through interviews and document review to test the theory. Analysis focused on comparison of activities, outcomes, mechanisms and the influence of context across cases, leading to revision of the program theory. Results The supervisor’s orientation was identified as the main mechanism contributing to variation observed in activities and their outcomes. Managerial control was the dominant orientation, reflecting the influence of standardized performance criteria and institutional culture. Humanized support was present in one case where the auxiliary nurse was motivated by the sense that the full scope of her work was valued. This orientation reflected the supervisor’s integration of her professional identity as a nurse. Conclusions The nature of the support health workers received was shaped by supervisors’ orientation, and in this study, nursing principles were central to humanized support. Efforts to strengthen the support that supervision provides to MLHWs should promote professional ethos as a means of developing shared performance goals and orient supervisors to a more holistic view of the health worker and their work. PMID:24602196

[Action-oriented versus state-oriented reactions to experimenter-induced failures].

PubMed

Brunstein, J C

1989-01-01

The present study assessed different effects of action-oriented versus state-oriented styles of coping with failure on achievement-related performance and cognition. In a learned helplessness experiment, students were exposed to an academic failure situation and were then tested on a series of problem-solving tasks, either immediately after the pretreatment or after a delay of 24 hours. Performance and cognitive concomitants were measured during both experimental periods. Results demonstrated that action orientation was associated with self-immunizing cognitions during helplessness training. Action-oriented participants improved their performance level even after repeated failure feedbacks. Moreover, action-oriented students assigned to the delayed test condition responded with increased striving for success and showed performance increments, even in comparison with control subjects. In contrast, state-oriented participants developed symptoms of helplessness and showed impaired performance during failure inductions. In later tests on problem-solving tasks, state-oriented groups responded with increased fear of failure. Independent of immediate or delayed test conditions, they soon lapsed into new performance decrements.

Conforming and nonconforming personality and stress coping styles in combat athletes.

PubMed

Bernacka, Ryszarda Ewa; Sawicki, Bogusław; Mazurek-Kusiak, Anna; Hawlena, Joanna

2016-06-01

The main objective of this study was to investigate whether the personality dimension of conformism/nonconformism was a predictor of stress coping styles in athletes training combat sports, and to present the characteristics of this personality dimension in the context of the competitors' adaptive/innovative sport performance. Scores of 346 males practising combat sports such as kick boxing, MMA, thai boxing, boxing and wrestling were analyzed. The participants completed the Creative Behaviour Questionnaire (KANH III) measuring the conformity/nonconformity personality dimension and the Coping Inventory for Stressful Situations (CISS) measuring stress coping styles. The comparative analyses were conducted only for the groups of conformists and nonconformists. Differences in stress coping styles between conformists and nonconformists training combat sports were found as nonconformists tended to prefer the task-oriented coping style. Conclusively, a higher rate of nonconformity was associated with increasingly frequent occurrence of task-oriented coping and decreasingly frequent emotion-oriented coping.

Publicly funded practice-oriented clinical trials: of importance for healthcare payers.

PubMed

Neyt, Mattias; Christiaens, Thierry; Demotes, Jacques; Walley, Tom; Hulstaert, Frank

2016-11-01

Many questions of relevance to patients/society are not answered by industry-sponsored clinical trials. We consider whether there are benefits to governments in funding practice-oriented clinical trials. A literature search including publications on institutions' websites was performed and supplemented with information gathered from (inter)national stakeholders. Areas were identified where public funding of clinical trials is of importance for society, such as head-to-head comparisons or medical areas where companies have no motivation to invest. The available literature suggests publicly funded research programs could provide a positive return on investment. The main hurdles (e.g., sufficient funding and absence of equipoise) and success factors (e.g., selection of research questions and research infrastructure) for the successful conduct of publicly funded trials were identified. Governments should see public funding of pragmatic practice-oriented clinical trials as a good opportunity to improve the selection and quality of treatments and stimulate efficient use of limited resources.

Conforming and nonconforming personality and stress coping styles in combat athletes

PubMed Central

Sawicki, Bogusław; Mazurek-Kusiak, Anna; Hawlena, Joanna

2016-01-01

Abstract The main objective of this study was to investigate whether the personality dimension of conformism/nonconformism was a predictor of stress coping styles in athletes training combat sports, and to present the characteristics of this personality dimension in the context of the competitors’ adaptive/innovative sport performance. Scores of 346 males practising combat sports such as kick boxing, MMA, thai boxing, boxing and wrestling were analyzed. The participants completed the Creative Behaviour Questionnaire (KANH III) measuring the conformity/nonconformity personality dimension and the Coping Inventory for Stressful Situations (CISS) measuring stress coping styles. The comparative analyses were conducted only for the groups of conformists and nonconformists. Differences in stress coping styles between conformists and nonconformists training combat sports were found as nonconformists tended to prefer the task-oriented coping style. Conclusively, a higher rate of nonconformity was associated with increasingly frequent occurrence of task-oriented coping and decreasingly frequent emotion-oriented coping. PMID:28149386

Phonon focusing and temperature dependences of thermal conductivity of silicon nanofilms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuleyev, I. I., E-mail: kuleev@imp.uran.ru; Bakharev, S. M.; Kuleyev, I. G.

2015-04-15

The effect of phonon focusing on the anisotropy and temperature dependences of the thermal conductivities of silicon nanofilms is analyzed using the three-mode Callaway model. The orientations of the film planes and the directions of the heat flux for maximal or minimal heat removal from silicon chip elements at low temperatures, as well as at room temperature, are determined. It is shown that in the case of diffuse reflection of phonons from the boundaries, the plane with the (100) orientation exhibits the lowest scattering ability (and the highest thermal conductivity), while the plane with the (111) orientation is characterized bymore » the highest scattering ability (and the lowest thermal conductivity). The thermal conductivity of wide films is determined to a considerable extent by the orientation of the film plane, while for nanowires with a square cross section, the thermal conductivity is mainly determined by the direction of the heat flux. The effect of elastic energy anisotropy on the dependences of the thermal conductivity on the geometrical parameters of films is analyzed. The temperatures of transition from boundary scattering to bulk relaxation mechanisms are determined.« less

Real-time Imaging Orientation Determination System to Verify Imaging Polarization Navigation Algorithm

PubMed Central

Lu, Hao; Zhao, Kaichun; Wang, Xiaochu; You, Zheng; Huang, Kaoli

2016-01-01

Bio-inspired imaging polarization navigation which can provide navigation information and is capable of sensing polarization information has advantages of high-precision and anti-interference over polarization navigation sensors that use photodiodes. Although all types of imaging polarimeters exist, they may not qualify for the research on the imaging polarization navigation algorithm. To verify the algorithm, a real-time imaging orientation determination system was designed and implemented. Essential calibration procedures for the type of system that contained camera parameter calibration and the inconsistency of complementary metal oxide semiconductor calibration were discussed, designed, and implemented. Calibration results were used to undistort and rectify the multi-camera system. An orientation determination experiment was conducted. The results indicated that the system could acquire and compute the polarized skylight images throughout the calibrations and resolve orientation by the algorithm to verify in real-time. An orientation determination algorithm based on image processing was tested on the system. The performance and properties of the algorithm were evaluated. The rate of the algorithm was over 1 Hz, the error was over 0.313°, and the population standard deviation was 0.148° without any data filter. PMID:26805851

Final Assessment of Manual Ultrasonic Examinations Applied to Detect Flaws in Primary System Dissimilar Metal Welds at North Anna Power Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Michael T.; Diaz, Aaron A.; Cinson, Anthony D.

2014-03-24

PNNL conducted a technical assessment of the NDE issues and protocols that led to missed detections of several axially oriented flaws in a steam generator primary inlet dissimilar metal weld at North Anna Power Station, Unit 1 (NAPS-1). This particular component design exhibits a significant outside-diameter (OD) taper that is not included as a blind performance demonstration mock-up within the industry’s Performance Demonstration Initiative, administered by EPRI. For this reason, the licensee engaged EPRI to assist in the development of a technical justification to support the basis for a site-specific qualification. The service-induced flaws at NAPS-1 were eventually detected asmore » a result of OD surface machining in preparation for a full structural weld overlay. The machining operation uncovered the existence of two through-wall flaws, based on the observance of primary water leaking from the dissimilar metal weld. A total of five axially oriented flaws were detected in varied locations around the weld circumference. The field volumetric examination that was conducted at NAPS-1 was a non-encoded, real-time manual ultrasonic examination. PNNL conducted both an initial assessment, and subsequently, a more rigorous technical evaluation (reported here), which has identified an array of NDE issues that may have led to the subject missed detections. These evaluations were performed through technical reviews and discussions with NRC staff, EPRI NDE Center personnel, industry and ISI vendor personnel, and ultrasonic transducer manufacturers, and laboratory tests, to better understand the underlying issues at North Anna.« less

Preparation and characterization of oriented poly(vinyl alcohol)/carbon nanotube composite nanofibers

NASA Astrophysics Data System (ADS)

Shimizu, Akikazu; Kato, Hayato; Sato, Taiga; Kushida, Masahito

2017-07-01

Oriented nanofiber mats blended with carbon nanotubes (CNTs) are expected to be applied as cell seeding scaffolds. Biomaterials that are often used for cell seeding scaffolds generally have low mechanical strength and low electrical conductivity; thus, it has been difficult to apply them to tissues such as heart and nerve. In this study, we prepared oriented poly(vinyl alcohol) (PVA) nanofiber mats blended with various CNT concentrations (up to 10 wt %) by electrospinning using the parallel plate electrodes as collectors with applied voltage. The morphology, mechanical properties, and electrical properties of the prepared oriented nanofiber mats were measured by using various techniques such as scanning electron microscopy (SEM). The tensile strength of the oriented nanofiber mats in the applied voltage direction increased from 2.5 to 9.7 MPa with CNT concentration. Furthermore, the electrical conductivity of the oriented nanofiber mats in the applied voltage direction increased from 0.67 × 10-7 to 4.3 × 10-7 S·m-1. Also, the mechanical strength and electrical conductivity of the oriented nanofiber mats in the applied voltage direction were 3-4 and 2-3 times higher than those in the perpendicular direction, respectively.

Supervisors matter more than you think: components of a mission-centered organizational climate.

PubMed

Butcher, A H

1994-01-01

A study was conducted in a medical center among a diverse sample of employees to examine whether components of organizational climate related to workers' knowledge of the organization's mission and mission-centered values. Findings supported a mediated relationship between supervisor behaviors, mission knowledge, and customer service orientation (the organization's key mission value). Employee perceptions of coworker and organizational support and knowledge of their own performance expectations also related positively to customer service orientation. Results suggest that supervisors are in an ideal position to disseminate a mission-centered climate. Practical applications of these findings for management wishing to develop mission-centered climates in health care organizations are discussed.

Outperforming whom? A multilevel study of performance-prove goal orientation, performance, and the moderating role of shared team identification.

PubMed

Dietz, Bart; van Knippenberg, Daan; Hirst, Giles; Restubog, Simon Lloyd D

2015-11-01

Performance-prove goal orientation affects performance because it drives people to try to outperform others. A proper understanding of the performance-motivating potential of performance-prove goal orientation requires, however, that we consider the question of whom people desire to outperform. In a multilevel analysis of this issue, we propose that the shared team identification of a team plays an important moderating role here, directing the performance-motivating influence of performance-prove goal orientation to either the team level or the individual level of performance. A multilevel study of salespeople nested in teams supports this proposition, showing that performance-prove goal orientation motivates team performance more with higher shared team identification, whereas performance-prove goal orientation motivates individual performance more with lower shared team identification. Establishing the robustness of these findings, a second study replicates them with individual and team performance in an educational context. (c) 2015 APA, all rights reserved).

Action versus state orientation and self-control performance after depletion.

PubMed

Gröpel, Peter; Baumeister, Roy F; Beckmann, Jürgen

2014-04-01

Three studies investigated the role of action versus state orientation in how people deal with depletion of self-control resources. Action-oriented persons were expected to continue allocating resources and hence to perform better than state-oriented persons who were expected to conserve strength. Consistent with this, action-oriented persons performed better on the d2 test of attention than state-oriented persons after a strenuous physical exercise (Study 1), showed higher acuity on the critical fusion frequency test after a test of vigilance (Study 2), and performed better on the Stroop test after a depleting sensorimotor task (Study 3). No differences emerged between action- and state-oriented persons in their initial performance and in a non-depleting context. The impact of depletion on subsequent performance is thus not fixed, but moderated by personality.

Network model for thermal conductivities of unidirectional fiber-reinforced composites

NASA Astrophysics Data System (ADS)

Wang, Yang; Peng, Chaoyi; Zhang, Weihua

2014-12-01

An empirical network model has been developed to predict the in-plane thermal conductivities along arbitrary directions for unidirectional fiber-reinforced composites lamina. Measurements of thermal conductivities along different orientations were carried out. Good agreement was observed between values predicted by the network model and the experimental data; compared with the established analytical models, the newly proposed network model could give values with higher precision. Therefore, this network model is helpful to get a wider and more comprehensive understanding of heat transmission characteristics of fiber-reinforced composites and can be utilized as guidance to design and fabricate laminated composites with specific directional or specific locational thermal conductivities for structures that simultaneously perform mechanical and thermal functions, i.e. multifunctional structures (MFS).

A New Localization System for Indoor Service Robots in Low Luminance and Slippery Indoor Environment Using Afocal Optical Flow Sensor Based Sensor Fusion.

PubMed

Yi, Dong-Hoon; Lee, Tae-Jae; Cho, Dong-Il Dan

2018-01-10

In this paper, a new localization system utilizing afocal optical flow sensor (AOFS) based sensor fusion for indoor service robots in low luminance and slippery environment is proposed, where conventional localization systems do not perform well. To accurately estimate the moving distance of a robot in a slippery environment, the robot was equipped with an AOFS along with two conventional wheel encoders. To estimate the orientation of the robot, we adopted a forward-viewing mono-camera and a gyroscope. In a very low luminance environment, it is hard to conduct conventional feature extraction and matching for localization. Instead, the interior space structure from an image and robot orientation was assessed. To enhance the appearance of image boundary, rolling guidance filter was applied after the histogram equalization. The proposed system was developed to be operable on a low-cost processor and implemented on a consumer robot. Experiments were conducted in low illumination condition of 0.1 lx and carpeted environment. The robot moved for 20 times in a 1.5 × 2.0 m square trajectory. When only wheel encoders and a gyroscope were used for robot localization, the maximum position error was 10.3 m and the maximum orientation error was 15.4°. Using the proposed system, the maximum position error and orientation error were found as 0.8 m and within 1.0°, respectively.

A New Localization System for Indoor Service Robots in Low Luminance and Slippery Indoor Environment Using Afocal Optical Flow Sensor Based Sensor Fusion

PubMed Central

Yi, Dong-Hoon; Lee, Tae-Jae; Cho, Dong-Il “Dan”

2018-01-01

In this paper, a new localization system utilizing afocal optical flow sensor (AOFS) based sensor fusion for indoor service robots in low luminance and slippery environment is proposed, where conventional localization systems do not perform well. To accurately estimate the moving distance of a robot in a slippery environment, the robot was equipped with an AOFS along with two conventional wheel encoders. To estimate the orientation of the robot, we adopted a forward-viewing mono-camera and a gyroscope. In a very low luminance environment, it is hard to conduct conventional feature extraction and matching for localization. Instead, the interior space structure from an image and robot orientation was assessed. To enhance the appearance of image boundary, rolling guidance filter was applied after the histogram equalization. The proposed system was developed to be operable on a low-cost processor and implemented on a consumer robot. Experiments were conducted in low illumination condition of 0.1 lx and carpeted environment. The robot moved for 20 times in a 1.5 × 2.0 m square trajectory. When only wheel encoders and a gyroscope were used for robot localization, the maximum position error was 10.3 m and the maximum orientation error was 15.4°. Using the proposed system, the maximum position error and orientation error were found as 0.8 m and within 1.0°, respectively. PMID:29320414

Team research at the biology-mathematics interface: project management perspectives.

PubMed

Milton, John G; Radunskaya, Ami E; Lee, Arthur H; de Pillis, Lisette G; Bartlett, Diana F

2010-01-01

The success of interdisciplinary research teams depends largely upon skills related to team performance. We evaluated student and team performance for undergraduate biology and mathematics students who participated in summer research projects conducted in off-campus laboratories. The student teams were composed of a student with a mathematics background and an experimentally oriented biology student. The team mentors typically ranked the students' performance very good to excellent over a range of attributes that included creativity and ability to conduct independent research. However, the research teams experienced problems meeting prespecified deadlines due to poor time and project management skills. Because time and project management skills can be readily taught and moreover typically reflect good research practices, simple modifications should be made to undergraduate curricula so that the promise of initiatives, such as MATH-BIO 2010, can be implemented.

Performance testing and analyses of the VSC-17 ventilated concrete cask. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKinnon, M.A.; Dodge, R.E.; Schmitt, R.C.

1992-05-01

This document details performance test which was conducted on a Pacific Sierra Nuclear VSC-17 ventilated concrete storage cask configured for pressurized-water reactor (PWR) spent fuel. The performance test consisted of loading the VSC-17 cask with 17 canisters of consolidated PWR spent fuel from Virginia Power`s Surry and Florida Power & Light Turkey Point reactors. Cask surface, concrete, air channel surfaces, and fuel canister guide tube temperatures were measured, as were cask surface gamma and neutron dose rates. Testing was performed with vacuum, nitrogen, and helium backfill environments in a vertical cask orientation. Data on spent fuel integrity were also obtained.

Leadership = Communication? The Relations of Leaders’ Communication Styles with Leadership Styles, Knowledge Sharing and Leadership Outcomes

PubMed Central

Bakker-Pieper, Angelique; Oostenveld, Wyneke

2009-01-01

Purpose The purpose of this study was to investigate the relations between leaders’ communication styles and charismatic leadership, human-oriented leadership (leader’s consideration), task-oriented leadership (leader’s initiating structure), and leadership outcomes. Methodology A survey was conducted among 279 employees of a governmental organization. The following six main communication styles were operationalized: verbal aggressiveness, expressiveness, preciseness, assuredness, supportiveness, and argumentativeness. Regression analyses were employed to test three main hypotheses. Findings In line with expectations, the study showed that charismatic and human-oriented leadership are mainly communicative, while task-oriented leadership is significantly less communicative. The communication styles were strongly and differentially related to knowledge sharing behaviors, perceived leader performance, satisfaction with the leader, and subordinate’s team commitment. Multiple regression analyses showed that the leadership styles mediated the relations between the communication styles and leadership outcomes. However, leader’s preciseness explained variance in perceived leader performance and satisfaction with the leader above and beyond the leadership style variables. Implications This study offers potentially invaluable input for leadership training programs by showing the importance of leader’s supportiveness, assuredness, and preciseness when communicating with subordinates. Originality/value Although one of the core elements of leadership is interpersonal communication, this study is one of the first to use a comprehensive communication styles instrument in the study of leadership. PMID:20700375

Thermal performance comparison of oscillating heat pipes with and without helical micro-grooves

NASA Astrophysics Data System (ADS)

Qu, Jian; Li, Xiaojun; Xu, Qian; Wang, Qian

2017-11-01

This paper presents an experimental investigation to compare the thermal performance of three closed loop oscillating heat pipes (OHPs) with and without internal helical microgrooves at vertical and horizontal orientations. All of these OHPs were made from copper tubes and have three turns with lengths of 70, 230 and 110 mm at the evaporator, adiabatic and condenser sections, respectively. Deionized water was used as the working fluid at a volumetric filling ratio of 50%. The internal diameters (IDs) of two smooth-tube OHPs are 4.0 and 4.8 mm, respectively, and the internal diameter of micro-grooved OHP without groove structures is about 4.5 mm. Experimental results demonstrated that the addition of groove structures make the OHP remarkably outperform smooth-tube OHPs in both effective thermal conductivity and thermal resistance. The thermal resistance of vertically-oriented micro-grooved OHP could be lowered to 0.057 °C/W associated with an effective thermal conductivity of 6.1 × 104 W/ (m·K) at the input heat flux of 3.8 × 104 W/m2. Compared to smooth-tube OHPs, preliminary mechanism analysis reveals that local heat transfer coefficients both at the heating and cooling sections of micro-grooved OHP could be significantly improved. Moreover, enhanced liquid backflow to the evaporator due to microgroove-induced capillarity is also responsible for the OHP performance enhancement.

Effects of Market, E-Marketing, and Technology Orientations on Innovativeness and Performance in Turkish Health Organizations.

PubMed

Mutlu, Hanifi Murat; Sürer, Atilla

2015-01-01

This article investigates the effects of strategic orientation on innovativeness and performance in health organizations in Turkey. We hypothesize that market, e-marketing, and technology orientations positively affect innovativeness and performance. Market and technology orientations are found not have a significant effect on performance, but e-marketing orientation and innovativeness have a significant and positive effect. We also investigate indirect effects on innovativeness and performance. The analyses of direct and indirect effects are an important contribution to understanding relationships among research variables.

Effects of market, e-marketing, and technology orientations on innovativeness and performance in Turkish health organizations.

PubMed

Mutlu, Hanifi Murat; Sürer, Atilla

2016-01-01

This article investigates the effects of strategic orientation on innovativeness and performance in health organizations in Turkey. We test hypotheses that market, e-marketing, and technology orientations positively affect innovativeness and performance. Market and technology orientations are found not have a significant effect on performance, but e-marketing orientation and innovativeness have a significant and positive effect. We also investigate indirect effects on innovativeness and performance. The analyses of direct and indirect effects are an important contribution to understanding relationships among research variables.

Assessment of visual health campaign activities at schools: teachers' perception.

PubMed

Carvalho, Regina de Souza; Temporini, Edméa Rita; Kara-José, Newton

2007-01-01

1) To assess the opinion of teachers involved in visual screening of school-age children and their referral to ophthalmologic examination within the "Eye-to-Eye National Campaign for Visual Disorders Prevention and Rehabilitation" (Campanha Nacional de Prevenção e Reabilitação Visual Olho no Olho); 2) To identify the teachers' perception with respect to the training received for conducting the campaign. A descriptive study has been conducted, based on data recorded from the application of a questionnaire to 1,517 elementary school teachers working in public schools in 27 Brazilian states. The following items were examined: received orientation, use of educational videos and handbooks, supplied explanations, difficulties, questions and overall campaign assessment. 82.0% of the teachers stated they had received orientation and 92.0% stated they had read the "Teacher Orientation Manual". Among those who received orientation, 47.0% stated it had been supplied by school officials; 30.0%, by healthcare agents, and 23.0% by ophthalmologists. In the self-assessment of performance, 58.0% reported no difficulties; 32.0% reported questions concerning the campaign activities and the professionals who most frequently asked to provide clarification were those from the State Education Agency (38.0%), followed by the school director (20.0%). Most teachers considered themselves adequately trained and oriented to take part in the campaign. Teachers' training was provided by administrative officials, previously trained by ophthalmologists ("multiplying effect") and the small percentage of questions raised indicated the validity of the procedure. Concerns have been raised as to the information about the ophthalmologic examination, transportation of the children and delivery of glasses. This kind of program always presents some difficulties and requires adjustments. It should, indeed, be improved, perhaps through a closer involvement of the community and families during its development.

Interfacial band alignment and structural properties of nanoscale TiO2 thin films for integration with epitaxial crystallographic oriented germanium

NASA Astrophysics Data System (ADS)

Jain, N.; Zhu, Y.; Maurya, D.; Varghese, R.; Priya, S.; Hudait, M. K.

2014-01-01

We have investigated the structural and band alignment properties of nanoscale titanium dioxide (TiO2) thin films deposited on epitaxial crystallographic oriented Ge layers grown on (100), (110), and (111)A GaAs substrates by molecular beam epitaxy. The TiO2 thin films deposited at low temperature by physical vapor deposition were found to be amorphous in nature, and high-resolution transmission electron microscopy confirmed a sharp heterointerface between the TiO2 thin film and the epitaxially grown Ge with no traceable interfacial layer. A comprehensive assessment on the effect of substrate orientation on the band alignment at the TiO2/Ge heterointerface is presented by utilizing x-ray photoelectron spectroscopy and spectroscopic ellipsometry. A band-gap of 3.33 ± 0.02 eV was determined for the amorphous TiO2 thin film from the Tauc plot. Irrespective of the crystallographic orientation of the epitaxial Ge layer, a sufficient valence band-offset of greater than 2 eV was obtained at the TiO2/Ge heterointerface while the corresponding conduction band-offsets for the aforementioned TiO2/Ge system were found to be smaller than 1 eV. A comparative assessment on the effect of Ge substrate orientation revealed a valence band-offset relation of ΔEV(100) > ΔEV(111) > ΔEV(110) and a conduction band-offset relation of ΔEC(110) > ΔEC(111) > ΔEC(100). These band-offset parameters are of critical importance and will provide key insight for the design and performance analysis of TiO2 for potential high-κ dielectric integration and for future metal-insulator-semiconductor contact applications with next generation of Ge based metal-oxide field-effect transistors.

Device orientation of a leadless pacemaker and subcutaneous implantable cardioverter-defibrillator in canine and human subjects and the effect on intrabody communication.

PubMed

Quast, Anne-Floor B E; Tjong, Fleur V Y; Koop, Brendan E; Wilde, Arthur A M; Knops, Reinoud E; Burke, Martin C

2018-02-14

The development of communicating modular cardiac rhythm management systems relies on effective intrabody communication between a subcutaneous implantable cardioverter-defibrillator (S-ICD) and a leadless pacemaker (LP), using conducted communication. Communication success is affected by the LP and S-ICD orientation. This study is designed to evaluate the orientation of the LP and S-ICD in canine subjects and measure success and threshold of intrabody communication. To gain more human insights, we will explore device orientation in LP and S-ICD patients. Canine subjects implanted with a prototype S-ICD and LP (both Boston Scientific, MA, USA) with anterior-posterior fluoroscopy images were included in this analysis. For comparison, a retrospective analysis of human S-ICD and LP patients was performed. The angle of the long axis of the LP towards the vertical axis of 0°, and distance between the coil and LP were measured. Twenty-three canine subjects were analysed. Median angle of the LP was 29° and median distance of the S-ICD coil to LP was 0.8 cm. All canine subjects had successful communication. The median communicating threshold was 2.5 V. In the human retrospective analysis, 72 LP patients and 100 S-ICD patients were included. The mean angle of the LP was 56° and the median distance between the S-ICD coil and LP was 4.6 cm. Despite the less favourable LP orientation in canine subjects, all communication attempts were successful. In the human subjects, we observed a greater and in theory more favourable LP angle towards the communication vector. These data suggests suitability of human anatomy for conductive intrabody communication.

Is team confidence the key to success? The reciprocal relation between collective efficacy, team outcome confidence, and perceptions of team performance during soccer games.

PubMed

Fransen, Katrien; Decroos, Steven; Vanbeselaere, Norbert; Vande Broek, Gert; De Cuyper, Bert; Vanroy, Jari; Boen, Filip

2015-01-01

The present manuscript extends previous research on the reciprocal relation between team confidence and perceived team performance in two ways. First, we distinguished between two types of team confidence; process-oriented collective efficacy and outcome-oriented team outcome confidence. Second, we assessed both types not only before and after the game, but for the first time also during half-time, thereby providing deeper insight into their dynamic relation with perceived team performance. Two field studies were conducted, each with 10 male soccer teams (N = 134 in Study 1; N = 125 in Study 2). Our findings provide partial support for the reciprocal relation between players' team confidence (both collective efficacy and team outcome confidence) and players' perceptions of the team's performance. Although both types of players' team confidence before the game were not significantly related to perceived team performance in the first half, players' team confidence during half-time was positively related to perceived team performance in the second half. Additionally, our findings consistently demonstrated a relation between perceived team performance and players' subsequent team confidence. Considering that team confidence is a dynamical process, which can be affected by coaches and players, our findings open new avenues to optimise team performance.

Thermal Characterization for a Modular 3-D Multichip Module

NASA Technical Reports Server (NTRS)

Fan, Mark S.; Plante, Jeannette; Shaw, Harry

2000-01-01

NASA Goddard Space Flight Center has designed a high-density modular 3-D multichip module (MCM) for future spaceflight use. This MCM features a complete modular structure, i.e., each stack can be removed from the package without damaging the structure. The interconnection to the PCB is through the Column Grid Array (CGA) technology. Because of its high-density nature, large power dissipation from multiple layers of circuitry is anticipated and CVD diamond films are used in the assembly for heat conduction enhancement. Since each stacked layer dissipates certain amount of heat, designing effective heat conduction paths through each stack and balancing the heat dissipation within each stack for optimal thermal performance become a challenging task. To effectively remove the dissipated heat from the package, extensive thermal analysis has been performed with finite element methods. Through these analyses, we are able to improve the thermal design and increase the total wattage of the package for maximum electrical performance. This paper provides details on the design-oriented thermal analysis and performance enhancement. It also addresses issues relating to contact thermal resistance between the diamond film and the metallic heat conduction paths.

Development of Integrated Magnetic and Kinetic Control-oriented Transport Model for q-profile Response Prediction in EAST Discharges

NASA Astrophysics Data System (ADS)

Wang, Hexiang; Schuster, Eugenio; Rafiq, Tariq; Kritz, Arnold; Ding, Siye

2016-10-01

Extensive research has been conducted to find high-performance operating scenarios characterized by high fusion gain, good confinement, plasma stability and possible steady-state operation. A key plasma property that is related to both the stability and performance of these advanced plasma scenarios is the safety factor profile. A key component of the EAST research program is the exploration of non-inductively driven steady-state plasmas with the recently upgraded heating and current drive capabilities that include lower hybrid current drive and neutral beam injection. Anticipating the need for tight regulation of the safety factor profile in these plasma scenarios, a first-principles-driven (FPD)control-oriented model is proposed to describe the safety factor profile evolution in EAST in response to the different actuators. The TRANSP simulation code is employed to tailor the FPD model to the EAST tokamak geometry and to convert it into a form suitable for control design. The FPD control-oriented model's prediction capabilities are demonstrated by comparing predictions with experimental data from EAST. Supported by the US DOE under DE-SC0010537,DE-FG02-92ER54141 and DE-SC0013977.

Putative pyramidal neurons and interneurons in the monkey parietal cortex make different contributions to the performance of a visual grouping task.

PubMed

Yokoi, Isao; Komatsu, Hidehiko

2010-09-01

Visual grouping of discrete elements is an important function for object recognition. We recently conducted an experiment to study neural correlates of visual grouping. We recorded neuronal activities while monkeys performed a grouping detection task in which they discriminated visual patterns composed of discrete dots arranged in a cross and detected targets in which dots with the same contrast were aligned horizontally or vertically. We found that some neurons in the lateral bank of the intraparietal sulcus exhibit activity related to visual grouping. In the present study, we analyzed how different types of neurons contribute to visual grouping. We classified the recorded neurons as putative pyramidal neurons or putative interneurons, depending on the duration of their action potentials. We found that putative pyramidal neurons exhibited selectivity for the orientation of the target, and this selectivity was enhanced by attention to a particular target orientation. By contrast, putative interneurons responded more strongly to the target stimuli than to the nontargets, regardless of the orientation of the target. These results suggest that different classes of parietal neurons contribute differently to the grouping of discrete elements.

Repeatability of testing a small broadband sensor in the Albuquerque Seismological Laboratory Underground Vault

USGS Publications Warehouse

Ringler, Adam; Holland, Austin; Wilson, David

2017-01-01

Variability in seismic instrumentation performance plays a fundamental role in our ability to carry out experiments in observational seismology. Many such experiments rely on the assumed performance of various seismic sensors as well as on methods to isolate the sensors from nonseismic noise sources. We look at the repeatability of estimating the self‐noise, midband sensitivity, and the relative orientation by comparing three collocated Nanometrics Trillium Compact sensors. To estimate the repeatability, we conduct a total of 15 trials in which one sensor is repeatedly reinstalled, alongside two undisturbed sensors. We find that we are able to estimate the midband sensitivity with an error of no greater than 0.04% with a 99th percentile confidence, assuming a standard normal distribution. We also find that we are able to estimate mean sensor self‐noise to within ±5.6  dB with a 99th percentile confidence in the 30–100‐s‐period band. Finally, we find our relative orientation errors have a mean difference in orientation of 0.0171° from the reference, but our trials have a standard deviation of 0.78°.

Promotion of Students' Mastery Goal Orientations: Does TARGET Work?

ERIC Educational Resources Information Center

Lüftenegger, Marko; van de Schoot, Rens; Schober, Barbara; Finsterwald, Monika; Spiel, Christiane

2014-01-01

Achievement goal orientations are important for students' ongoing motivation. Students with a mastery goal orientation show the most advantageous achievement and motivational patterns. Much research has been conducted to identify classroom structures which promote students' mastery goal orientation. The TARGET framework is one example of these…

Effects of choline chloride on electrodeposited Ni coating from a Watts-type bath

NASA Astrophysics Data System (ADS)

Wang, Yurong; Yang, Caihong; He, Jiawei; Wang, Wenchang; Mitsuzak, Naotoshi; Chen, Zhidong

2016-05-01

Electrodeposition of bright nickel (Ni) was carried out in a Watts-type bath. Choline chloride (ChCl) was applied as a multifunctional additive and substitute for nickel chloride (NiCl2) in a Watts-type bath. The function of ChCl was investigated through conductivity tests, anodic polarization, and cathodic polarization experiments. The studies revealed that ChCl performed well as a conducting salt, anodic activator, and cathodic inhibitor. The effects of ChCl on deposition rate, preferred orientation, grain size, surface morphology, and microhardness of Ni coatings were also studied. The deposition rate reached a maximum value of greater than 27 μm h-1 when 20 g L-1 ChCl was introduced to the bath. Using X-ray diffraction, it was confirmed that progressive addition of ChCl promoted the preferred crystal orientation modification from (2 0 0) and (2 2 0) to (1 1 1), refined grain size, and enhanced microhardness. The presence of ChCl lowered the roughness of the coating.

Sparse Solution of Fiber Orientation Distribution Function by Diffusion Decomposition

PubMed Central

Yeh, Fang-Cheng; Tseng, Wen-Yih Isaac

2013-01-01

Fiber orientation is the key information in diffusion tractography. Several deconvolution methods have been proposed to obtain fiber orientations by estimating a fiber orientation distribution function (ODF). However, the L 2 regularization used in deconvolution often leads to false fibers that compromise the specificity of the results. To address this problem, we propose a method called diffusion decomposition, which obtains a sparse solution of fiber ODF by decomposing the diffusion ODF obtained from q-ball imaging (QBI), diffusion spectrum imaging (DSI), or generalized q-sampling imaging (GQI). A simulation study, a phantom study, and an in-vivo study were conducted to examine the performance of diffusion decomposition. The simulation study showed that diffusion decomposition was more accurate than both constrained spherical deconvolution and ball-and-sticks model. The phantom study showed that the angular error of diffusion decomposition was significantly lower than those of constrained spherical deconvolution at 30° crossing and ball-and-sticks model at 60° crossing. The in-vivo study showed that diffusion decomposition can be applied to QBI, DSI, or GQI, and the resolved fiber orientations were consistent regardless of the diffusion sampling schemes and diffusion reconstruction methods. The performance of diffusion decomposition was further demonstrated by resolving crossing fibers on a 30-direction QBI dataset and a 40-direction DSI dataset. In conclusion, diffusion decomposition can improve angular resolution and resolve crossing fibers in datasets with low SNR and substantially reduced number of diffusion encoding directions. These advantages may be valuable for human connectome studies and clinical research. PMID:24146772

Conductive layer for biaxially oriented semiconductor film growth

DOEpatents

Findikoglu, Alp T.; Matias, Vladimir

2007-10-30

A conductive layer for biaxially oriented semiconductor film growth and a thin film semiconductor structure such as, for example, a photodetector, a photovoltaic cell, or a light emitting diode (LED) that includes a crystallographically oriented semiconducting film disposed on the conductive layer. The thin film semiconductor structure includes: a substrate; a first electrode deposited on the substrate; and a semiconducting layer epitaxially deposited on the first electrode. The first electrode includes a template layer deposited on the substrate and a buffer layer epitaxially deposited on the template layer. The template layer includes a first metal nitride that is electrically conductive and has a rock salt crystal structure, and the buffer layer includes a second metal nitride that is electrically conductive. The semiconducting layer is epitaxially deposited on the buffer layer. A method of making such a thin film semiconductor structure is also described.

[Cost-benefit analysis of primary prevention programs for mental health at the workplace in Japan].

PubMed

Yoshimura, Kensuke; Kawakami, Norito; Tsusumi, Akizumi; Inoue, Akiomi; Kobayashi, Yuka; Takeuchi, Ayano; Fukuda, Takashi

2013-01-01

To determine the cost-benefits of primary prevention programs for mental health at the workplace, we conducted a meta-analysis of published studies in Japan. We searched the literature, published as of 16 November 2011, using the Pubmed database and relevant key words. The inclusion criteria were: conducted in the workplace in Japan; primary prevention focus; quasi-experimental studies or controlled trials; and outcomes including absenteeism or presenteeism. Four studies were identified: one participatory work environment improvement, one individual-oriented stress management, and two supervisor education programs. Costs and benefits in yen were estimated for each program, based on the description of the programs in the literature, and additional information from the authors. The benefits were estimated based on each program's effect on work performance (measured using the WHO Health and Work Performance Questionnaire in all studies), as well as sick leave days, if available. The estimated relative increase in work performance (%) in the intervention group compared to the control group was converted into labor cost using the average bonus (18% of the total annual salary) awarded to employees in Japan as a base. Sensitive analyses were conducted using different models of time-trend of intervention effects and 95% confidence limits of the relative increase in work performance. For the participatory work environment improvement program, the cost was estimated as 7,660 yen per employee, and the benefit was 15,200-22,800 yen per employee. For the individual-oriented stress management program, the cost was 9,708 yen per employee, and the benefit was 15,200-22,920 yen per employee. For supervisor education programs, the costs and benefits were respectively 5,209 and 4,400-6,600 yen per employee, in one study, 2,949 and zero yen per employee in the other study. The 95% confidence intervals were wide for all these studies. For the point estimates based on these cases, the participatory work environment improvement program and the individual-oriented stress management program showed better cost-benefits. For the supervisor education programs, the costs were almost equal to or greater than the benefits. The results of the present study suggest these primary prevention programs for mental health at the workplace are economically advantageous to employers. Because the 95% confidence intervals were wide, further research is needed to clarify if these interventions yield statistically significant cost-benefits.

Silicon Heat Pipe Array

NASA Technical Reports Server (NTRS)

Yee, Karl Y.; Ganapathi, Gani B.; Sunada, Eric T.; Bae, Youngsam; Miller, Jennifer R.; Beinsford, Daniel F.

2013-01-01

Improved methods of heat dissipation are required for modern, high-power density electronic systems. As increased functionality is progressively compacted into decreasing volumes, this need will be exacerbated. High-performance chip power is predicted to increase monotonically and rapidly with time. Systems utilizing these chips are currently reliant upon decades of old cooling technology. Heat pipes offer a solution to this problem. Heat pipes are passive, self-contained, two-phase heat dissipation devices. Heat conducted into the device through a wick structure converts the working fluid into a vapor, which then releases the heat via condensation after being transported away from the heat source. Heat pipes have high thermal conductivities, are inexpensive, and have been utilized in previous space missions. However, the cylindrical geometry of commercial heat pipes is a poor fit to the planar geometries of microelectronic assemblies, the copper that commercial heat pipes are typically constructed of is a poor CTE (coefficient of thermal expansion) match to the semiconductor die utilized in these assemblies, and the functionality and reliability of heat pipes in general is strongly dependent on the orientation of the assembly with respect to the gravity vector. What is needed is a planar, semiconductor-based heat pipe array that can be used for cooling of generic MCM (multichip module) assemblies that can also function in all orientations. Such a structure would not only have applications in the cooling of space electronics, but would have commercial applications as well (e.g. cooling of microprocessors and high-power laser diodes). This technology is an improvement over existing heat pipe designs due to the finer porosity of the wick, which enhances capillary pumping pressure, resulting in greater effective thermal conductivity and performance in any orientation with respect to the gravity vector. In addition, it is constructed of silicon, and thus is better suited for the cooling of semiconductor devices.

Outcomes of a College Wilderness Orientation Program

ERIC Educational Resources Information Center

Lien, Matt; Goldenberg, Marni

2012-01-01

Wilderness orientation programs have been utilized by colleges and universities in the United States for nearly 75 years. This study, using means-end theory, reveals the outcomes of a wilderness orientation program for incoming students. A retroactive study was conducted for all participants who had taken part in a wilderness orientation program…

Orienteering: A Swedish Way of Life.

ERIC Educational Resources Information Center

Oliver, Rick

1984-01-01

Orienteering involves navigating over an unfamiliar route with a map and a compass and locating control markers as quickly as possible. Originating in Sweden, orienting began primarily as a military event and has grown into "a sport for all." Suggested activities in orienteering to conduct in school conclude the article. (ERB)

Facing Off: Comparing an In-Person Library Orientation Lecture with an Asynchronous Online Library Orientation

ERIC Educational Resources Information Center

Gall, Dan

2014-01-01

A study to compare the effectiveness of an in-person library orientation with an online asynchronous orientation was conducted with three sections of Social Work Research Methods, a required course in the University of Iowa's Master of Social Work program. Two sections of the course received an online orientation involving short videos, text and…

Imaging, object detection, and change detection with a polarized multistatic GPR array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beer, N. Reginald; Paglieroni, David W.

A polarized detection system performs imaging, object detection, and change detection factoring in the orientation of an object relative to the orientation of transceivers. The polarized detection system may operate on one of several modes of operation based on whether the imaging, object detection, or change detection is performed separately for each transceiver orientation. In combined change mode, the polarized detection system performs imaging, object detection, and change detection separately for each transceiver orientation, and then combines changes across polarizations. In combined object mode, the polarized detection system performs imaging and object detection separately for each transceiver orientation, and thenmore » combines objects across polarizations and performs change detection on the result. In combined image mode, the polarized detection system performs imaging separately for each transceiver orientation, and then combines images across polarizations and performs object detection followed by change detection on the result.« less

Firm performance model in small and medium enterprises (SMEs) based on learning orientation and innovation

NASA Astrophysics Data System (ADS)

Lestari, E. R.; Ardianti, F. L.; Rachmawati, L.

2018-03-01

This study investigated the relationship between learning orientation, innovation, and firm performance. A conceptual model and hypothesis were empirically examined using structural equation modelling. The study involved a questionnaire-based survey of owners of small and medium enterprises (SMEs) operating in Batu City, Indonesia. The results showed that both variables of learning orientation and innovation effect positively on firm performance. Additionally, learning orientation has positive effect innovation. This study has implication for SMEs aiming at increasing their firm performance based on learning orientation and innovation capability.

The influence of preferred orientation and poling temperature on the polarization switching current in PZT thin films

NASA Astrophysics Data System (ADS)

Xiao, Mi; Zhang, Weikang; Zhang, Zebin; Zhang, Ping; Lan, Kuibo

2017-07-01

In this paper, Pb(Zr0.52Ti0.48)O3 (PZT) thin films with different preferred orientation were prepared on platinized silicon substrates by a modified sol-gel method. Our results indicate that the polarization switching current in PZT thin films is dependent on preferred orientation and poling temperature. In our measurements, (111)-oriented PZT has a larger polarization switching current than randomly oriented PZT, and with the increase of the degree of (111) preferred orientation and the poling temperature, the polarization switching current gradually increase. Considering the contact of PZT thin film with electrodes, the space-charged limited conduction (SCLC) combined with domain switching mechanism may be responsible for such phenomena. By analyzing the conduction data, we found the interface-limited Schottky emission (ES) and bulk-limited Poole-Frenkel hopping (PF) are not suitable for our samples.

Orientation Preferences and Motion Sickness Induced in a Virtual Reality Environment.

PubMed

Chen, Wei; Chao, Jian-Gang; Zhang, Yan; Wang, Jin-Kun; Chen, Xue-Wen; Tan, Cheng

2017-10-01

Astronauts' orientation preferences tend to correlate with their susceptibility to space motion sickness (SMS). Orientation preferences appear universally, since variable sensory cue priorities are used between individuals. However, SMS susceptibility changes after proper training, while orientation preferences seem to be intrinsic proclivities. The present study was conducted to investigate whether orientation preferences change if susceptibility is reduced after repeated exposure to a virtual reality (VR) stimulus environment that induces SMS. A horizontal supine posture was chosen to create a sensory context similar to weightlessness, and two VR devices were used to produce a highly immersive virtual scene. Subjects were randomly allocated to an experimental group (trained through exposure to a provocative rotating virtual scene) and a control group (untrained). All subjects' orientation preferences were measured twice with the same interval, but the experimental group was trained three times during the interval, while the control group was not. Trained subjects were less susceptible to SMS, with symptom scores reduced by 40%. Compared with untrained subjects, trained subjects' orientation preferences were significantly different between pre- and posttraining assessments. Trained subjects depended less on visual cues, whereas few subjects demonstrated the opposite tendency. Results suggest that visual information may be inefficient and unreliable for body orientation and stabilization in a rotating visual scene, while reprioritizing preferences for different sensory cues was dynamic and asymmetric between individuals. The present findings should facilitate customization of efficient and proper training for astronauts with different sensory prioritization preferences and dynamic characteristics.Chen W, Chao J-G, Zhang Y, Wang J-K, Chen X-W, Tan C. Orientation preferences and motion sickness induced in a virtual reality environment. Aerosp Med Hum Perform. 2017; 88(10):903-910.

Purely hopping conduction in c-axis oriented LiNbO3 thin films

NASA Astrophysics Data System (ADS)

Shandilya, Swati; Tomar, Monika; Sreenivas, K.; Gupta, Vinay

2009-05-01

Dielectric constant and ac conductivity of highly c-axis oriented LiNbO3 thin film grown by pulsed laser deposition were studied in a metal-insulator-metal configuration over a wide temperature (200 to 450 K) and frequency (100 Hz to 1 MHz) range. The preferred oriented Al (1%) doped ZnO film with electrical conductivity 1.1×103 Ω-1 cm-1 was deposited for dual purpose: (1) to serve as nucleating center for LiNbO3 crystallites along preferred c-axis growth direction, and (2) to act as a suitable bottom electrode for electrical studies. The room temperature dc conductivity (σdc) of LiNbO3 film was about 5.34×10-10 Ω-1 cm-1 with activation energy ˜0.3 eV, indicating extrinsic conduction. The ac conductivity σac was found to be much higher in comparison to σdc in the low temperature region (<300 K) and exhibits a power law behavior due to the hopping of charge carriers. In higher temperature region (>300 K), σac shows a weak frequency dependence, whereas dielectric constant exhibits a strong frequency dispersion. The dielectric dispersion data has been discussed in the light of theoretical models based on Debye type mixed conduction and purely hopping conduction. The dominant conduction in c-axis oriented LiNbO3 thin film is attributed to the purely hopping where both σdc and σac arise due to same mechanism.

"The Points, the Points, the Points": Exploring the Impact of Performance Oriented Education on the Espoused Values of Senior Cycle Poetry Teachers in Ireland

ERIC Educational Resources Information Center

Hennessy, Jennifer; Hinchion, Carmel; McNamara, Patricia Mannix

2011-01-01

Teachers of English experience significant pressure in attempting to meet the requirements of the national examination system, while also seeking to uphold their own ideological and philosophical perspectives on the value of poetry. Drawing on a mixed method study into the teaching of poetry at post-primary level in Ireland conducted between 2007…

Optimization of perceptual learning: effects of task difficulty and external noise in older adults.

PubMed

DeLoss, Denton J; Watanabe, Takeo; Andersen, George J

2014-06-01

Previous research has shown a wide array of age-related declines in vision. The current study examined the effects of perceptual learning (PL), external noise, and task difficulty in fine orientation discrimination with older individuals (mean age 71.73, range 65-91). Thirty-two older subjects participated in seven 1.5-h sessions conducted on separate days over a three-week period. A two-alternative forced choice procedure was used in discriminating the orientation of Gabor patches. Four training groups were examined in which the standard orientations for training were either easy or difficult and included either external noise (additive Gaussian noise) or no external noise. In addition, the transfer to an untrained orientation and noise levels were examined. An analysis of the four groups prior to training indicated no significant differences between the groups. An analysis of the change in performance post-training indicated that the degree of learning was related to task difficulty and the presence of external noise during training. In addition, measurements of pupil diameter indicated that changes in orientation discrimination were not associated with changes in retinal illuminance. These results suggest that task difficulty and training in noise are factors important for optimizing the effects of training among older individuals. Copyright © 2013 Elsevier B.V. All rights reserved.

Goal orientations of health profession students throughout the undergraduate program: a multilevel study.

PubMed

Kool, Ada; Mainhard, Tim; Brekelmans, Mieke; van Beukelen, Peter; Jaarsma, Debbie

2016-03-31

The achievement goal theory defines two major foci of students' learning goals (1) primarily interested in truly mastering a task (mastery orientation), and (2) striving to show ones competences to others (performance orientation). The present study is undertaken to better understand if and how health profession students' goal orientations change during the undergraduate program and to what degree gender, academic achievement, and self-efficacy are associated with mastery and performance orientation between students and within students over time. By means of an online questionnaire, students of medical, pharmaceutical, and veterinary sciences (N = 2402) were asked to rate themselves on mastery orientation, performance orientation, and self-efficacy at the beginning of five consecutive semesters. Data on grades and gender were drawn from university's files. Multilevel analyses were used for data analysis. Students' goal orientations showed relative stability over time, but substantial fluctuations within individual students were found. These fluctuations were associated with fluctuations in self-efficacy. Students' gender, high school grades, study grades, and self-efficacy were all associated with differences in mastery or performance orientation between students. Self-efficacy was the strongest predictor for mastery orientation and grades for performance orientation. The relatively strong association between the goal orientations and students' self-efficacy found in this study emphasizes the potential of enhancing self-efficacy in health profession students. Also, for educators and researchers, fluctuations of both goal orientations within individual students are important to consider.

Hong Kong Teacher Education Students' Goal Orientations and Their Relationship to Perceived Parenting Styles

ERIC Educational Resources Information Center

Chan, Kwok-Wai; Chan, Siu-Mui

2007-01-01

The study examined goal orientations, perceived parenting styles, and their relationships in a sample of Hong Kong teacher education students. It was found that students adopted both learning and performance goals but tended to be more performance goal-oriented. Females were more performance goal-oriented than males. As well, students perceived…

An environment-dependent semi-empirical tight binding model suitable for electron transport in bulk metals, metal alloys, metallic interfaces, and metallic nanostructures. II. Application—Effect of quantum confinement and homogeneous strain on Cu conductance

NASA Astrophysics Data System (ADS)

Hegde, Ganesh; Povolotskyi, Michael; Kubis, Tillmann; Charles, James; Klimeck, Gerhard

2014-03-01

The Semi-Empirical tight binding model developed in Part I Hegde et al. [J. Appl. Phys. 115, 123703 (2014)] is applied to metal transport problems of current relevance in Part II. A systematic study of the effect of quantum confinement, transport orientation, and homogeneous strain on electronic transport properties of Cu is carried out. It is found that quantum confinement from bulk to nanowire boundary conditions leads to significant anisotropy in conductance of Cu along different transport orientations. Compressive homogeneous strain is found to reduce resistivity by increasing the density of conducting modes in Cu. The [110] transport orientation in Cu nanowires is found to be the most favorable for mitigating conductivity degradation since it shows least reduction in conductance with confinement and responds most favorably to compressive strain.

Development of Academic Goal Orientation Inventory for Senior Secondary School Students of Kerala

ERIC Educational Resources Information Center

Gafoor, K. Abdul; Abidha, Kurukkan

2015-01-01

Research interest in achievement motivation and its correlates has grown in recent years. Though there are thousands of studies on goal orientation, the number of instruments to identify goal orientation based on four-fold model viz., performance approach goal orientation (PAP), performance avoidance goal orientation (PAV), mastery approach goal…

A novel approach to training attention and gaze in ASD: A feasibility and efficacy pilot study.

PubMed

Chukoskie, Leanne; Westerfield, Marissa; Townsend, Jeanne

2018-05-01

In addition to the social, communicative and behavioral symptoms that define the disorder, individuals with ASD have difficulty re-orienting attention quickly and accurately. Similarly, fast re-orienting saccadic eye movements are also inaccurate and more variable in both endpoint and timing. Atypical gaze and attention are among the earliest symptoms observed in ASD. Disruption of these foundation skills critically affects the development of higher level cognitive and social behavior. We propose that interventions aimed at these early deficits that support social and cognitive skills will be broadly effective. We conducted a pilot clinical trial designed to demonstrate the feasibility and preliminary efficacy of using gaze-contingent video games for low-cost in-home training of attention and eye movement. Eight adolescents with ASD participated in an 8-week training, with pre-, mid- and post-testing of eye movement and attention control. Six of the eight adolescents completed the 8 weeks of training and all six showed improvement in attention (orienting, disengagement) and eye movement control or both. All game systems remained intact for the duration of training and all participants could use the system independently. We delivered a robust, low-cost, gaze-contingent game system for home use that, in our pilot training sample, improved the attention orienting and eye movement performance of adolescent participants in 8 weeks of training. We are currently conducting a clinical trial to replicate these results and to examine what, if any, aspects of training transfer to more real-world tasks. © 2017 Wiley Periodicals, Inc. Develop Neurobiol 78: 546-554, 2018. © 2017 Wiley Periodicals, Inc.

Thermal conductivity anisotropy of metasedimentary and igneous rocks

NASA Astrophysics Data System (ADS)

Davis, Michael G.; Chapman, David S.; van Wagoner, Thomas M.; Armstrong, Phillip A.

2007-05-01

Thermal conductivity anisotropy was determined for three sets of metasedimentary and igneous rocks from central Utah, USA. Most conductivity measurements were made in transient mode with a half-space, line source instrument oriented in two orthogonal directions on a flat face cut perpendicular to bedding. One orientation of the probe yields thermal conductivity parallel to bedding (kpar) directly, the other orientation of the probe measures a product of conductivities parallel and perpendicular to bedding from which the perpendicular conductivity (kperp) is calculated. Some direct measurements of kpar and kperp were made on oriented cylindrical discs using a conventional divided bar device in steady state mode. Anisotropy is defined as kpar/kperp. Precambrian argillites from Big Cottonwood Canyon have anisotropy values from 0.8 to 2.1 with corresponding conductivity perpendicular to bedding of 2.0 to 6.2 W m-1 K-1. Anisotropy values for Price Canyon sedimentary samples are less than 1.2 with a mean of 1.04 although thermal conductivity perpendicular to bedding for the samples varied from 1.3 to 5.0 W m-1 K-1. The granitic rocks were found to be essentially isotropic with thermal conductivity perpendicular to bedding having a range of 2.2 to 3.2 W m-1 K-1 and a mean of 2.68 W m-1 K-1. The results confirm the observation by Deming [1994] that anisotropy is negligible for rocks having kperp greater than 4.0 W m-1 K-1 and generally increases for low conductivity metamorphic and clay-rich rocks. There is little evidence, however, for his suggestion that thermal conductivity anisotropy of all rocks increases systematically to about 2.5 for low thermal conductivity rocks.

A Semi-Automatic Image-Based Close Range 3D Modeling Pipeline Using a Multi-Camera Configuration

PubMed Central

Rau, Jiann-Yeou; Yeh, Po-Chia

2012-01-01

The generation of photo-realistic 3D models is an important task for digital recording of cultural heritage objects. This study proposes an image-based 3D modeling pipeline which takes advantage of a multi-camera configuration and multi-image matching technique that does not require any markers on or around the object. Multiple digital single lens reflex (DSLR) cameras are adopted and fixed with invariant relative orientations. Instead of photo-triangulation after image acquisition, calibration is performed to estimate the exterior orientation parameters of the multi-camera configuration which can be processed fully automatically using coded targets. The calibrated orientation parameters of all cameras are applied to images taken using the same camera configuration. This means that when performing multi-image matching for surface point cloud generation, the orientation parameters will remain the same as the calibrated results, even when the target has changed. Base on this invariant character, the whole 3D modeling pipeline can be performed completely automatically, once the whole system has been calibrated and the software was seamlessly integrated. Several experiments were conducted to prove the feasibility of the proposed system. Images observed include that of a human being, eight Buddhist statues, and a stone sculpture. The results for the stone sculpture, obtained with several multi-camera configurations were compared with a reference model acquired by an ATOS-I 2M active scanner. The best result has an absolute accuracy of 0.26 mm and a relative accuracy of 1:17,333. It demonstrates the feasibility of the proposed low-cost image-based 3D modeling pipeline and its applicability to a large quantity of antiques stored in a museum. PMID:23112656

A semi-automatic image-based close range 3D modeling pipeline using a multi-camera configuration.

PubMed

Rau, Jiann-Yeou; Yeh, Po-Chia

2012-01-01

The generation of photo-realistic 3D models is an important task for digital recording of cultural heritage objects. This study proposes an image-based 3D modeling pipeline which takes advantage of a multi-camera configuration and multi-image matching technique that does not require any markers on or around the object. Multiple digital single lens reflex (DSLR) cameras are adopted and fixed with invariant relative orientations. Instead of photo-triangulation after image acquisition, calibration is performed to estimate the exterior orientation parameters of the multi-camera configuration which can be processed fully automatically using coded targets. The calibrated orientation parameters of all cameras are applied to images taken using the same camera configuration. This means that when performing multi-image matching for surface point cloud generation, the orientation parameters will remain the same as the calibrated results, even when the target has changed. Base on this invariant character, the whole 3D modeling pipeline can be performed completely automatically, once the whole system has been calibrated and the software was seamlessly integrated. Several experiments were conducted to prove the feasibility of the proposed system. Images observed include that of a human being, eight Buddhist statues, and a stone sculpture. The results for the stone sculpture, obtained with several multi-camera configurations were compared with a reference model acquired by an ATOS-I 2M active scanner. The best result has an absolute accuracy of 0.26 mm and a relative accuracy of 1:17,333. It demonstrates the feasibility of the proposed low-cost image-based 3D modeling pipeline and its applicability to a large quantity of antiques stored in a museum.

The effects of window shape and reticle presence on performance in a vertical alignment task

NASA Technical Reports Server (NTRS)

Rosenberg, Erika L.; Haines, Richard F.; Jordan, Kevin

1989-01-01

This study was conducted to evaluate the effect of selected interior work-station orientational cuing upon the ability to align a target image with local vertical in the frontal plane. Angular error from gravitational vertical in an alignment task was measured for 20 observers viewing through two window shapes (square, round), two initial orientations of a computer-generated space shuttle image, and the presence or absence of a stabilized optical alignment reticle. In terms of overall accuracy, it was found that observer error was significantly smaller for the square window and reticle-present conditions than for the round window and reticle-absent conditions. Response bias data reflected an overall tendency to undershoot and greater variability of response in the round window/no reticle condition. These results suggest that environmental cuing information, such as that provided by square window frames and alignment reticles, may aid in subjective orientation and increase accuracy of response in a Space Station proximity operations alignment task.

Geometrical Effect on Thermal Conductivity of Unidirectional Fiber-Reinforced Polymer Composite along Different In-plane Orientations

NASA Astrophysics Data System (ADS)

Fang, Zenong; Li, Min; Wang, Shaokai; Li, Yanxia; Wang, Xiaolei; Gu, Yizhuo; Liu, Qianli; Tian, Jie; Zhang, Zuoguang

2017-11-01

This paper focuses on the anisotropic characteristics of the in-plane thermal conductivity of fiber-reinforced polymer composite based on experiment and simulation. Thermal conductivity along different in-plane orientations was measured by laser flash analysis (LFA) and steady-state heat flow method. Their heat transfer processes were simulated to reveal the geometrical effect on thermal conduction. The results show that the in-plane thermal conduction of unidirectional carbon-fiber-reinforced polymer composite is greatly influenced by the sample geometry at an in-plane orientation angle between 0° to 90°. By defining radius-to-thickness as a dimensionless shape factor for the LFA sample, the apparent thermal conductivity shows a dramatic change when the shape factor is close to the tangent of the orientation angle (tanθ). Based on finite element analysis, this phenomenon was revealed to correlate with the change of the heat transfer process. When the shape factor is larger than tanθ, the apparent thermal conductivity is consistent with the estimated value according to the theoretical model. For a sample with a shape factor smaller than tanθ, the apparent thermal conductivity shows a slow growth around a low value, which seriously deviates from the theory estimation. This phenomenon was revealed to correlate with the change of the heat transfer process from a continuous path to a zigzag path. These results will be helpful in optimizing the ply scheme of composite laminates for thermal management applications.

Two Studies of the Empirical Basis of Two Learning Resource-Oriented Motivational Strategies for Gifted Educators

ERIC Educational Resources Information Center

Vladut, Anamaria; Vialle, Wilma; Ziegler, Albert

2016-01-01

Two learning resource-oriented motivational strategies for gifted educators are introduced: a homeostatic orientation that aims for balance and an allostatic orientation that aims at growth. In order to establish the empirical basis of these motivational strategies, two studies were conducted with samples of students from a specialized…

Three-Dimensional Stress Fields and Slip Systems for Single Crystal Superalloy Notched Specimens

NASA Technical Reports Server (NTRS)

Magnan, Shannon M.; Throckmorton, David (Technical Monitor)

2002-01-01

Single crystal superalloys have become increasingly popular for turbine blade and vane applications due to their high strength, and creep and fatigue resistance at elevated temperatures. The crystallographic orientation of a single crystal material greatly affects its material properties, including elastic modulus, shear modulus, and ductility. These directional properties, along with the type of loading and temperature, dictate an anisotropic response in the yield strength, creep resistance, creep rupture ductility, fatigue resistance, etc. A significant amount of research has been conducted to determine the material properties in the <001> orientation, yet the material properties deviating from the <001> orientation have not been assessed for all cases. Based on the desired application and design criteria, a crystal orientation is selected to yield the maximum properties. Currently, single crystal manufacturing is able to control the primary crystallographic orientation within 15 of the target orientation, which is an acceptable deviation to meet both performance and cost guidelines; the secondary orientation is rarely specified. A common experiment is the standard load-controlled tensile test, in which specimens with different orientations can be loaded to observe the material response. The deformation behavior of single-crystal materials under tension and compression is known to be a function of not only material orientation, but also of varying microdeformation (i.e. dislocation) mechanisms. The underlying dislocation motion causes deformation via slip, and affects the activation of specific slip systems based on load and orientation. The slip can be analyzed by observing the visible traces left on the surface of the specimen from the slip activity within the single crystal material. The goal of this thesis was to predict the slip systems activated in three-dimensional stress fields of a notched tensile specimen, as a function of crystal orientation, using finite element analysis without addressing microstructural deformation mechanisms that govern their activation. Out of three orientations tested, the specimen with a [110] load orientation and a [001] growth direction had the lowest maximum resolved shear stress; this specimen orientation appears to be the best design candidate for a tensile application.

Optically tracked, single-coil, scanning magnetic induction tomography

NASA Astrophysics Data System (ADS)

Feldkamp, Joe R.; Quirk, Stephen

2017-03-01

Recent work has shown the feasibility of single-coil, magnetic induction tomography, for visualizing a 3D distribution of electrical conductivity in portions of the human body. Loss is measured in a single, planar coil consisting of concentric circular loops while the coil is relocated to various non-redundant positions and orientations in the vicinity of the target. These loss values, together with measured coil position and orientation, are processed by a quantitative mapping equation that enables reconstruction of an electrical conductivity image. Up until now, the position of the coil had to be established by a template, which required assignment of locations for the coil to visit without necessarily giving any prior consideration to target geometry. We have now added optical tracking to our existing single-coil device so that position and orientation are tracked automatically, allowing collection of coil loss data at arbitrary positions or orientations as needed. Optical tracking is accomplished via a set of IR reflective spheres mounted on the same enclosure that supports the coil. Position for a select sphere within the set, together with the four quaternions specifying optical body orientation, is fed to a laptop at the same time coil loss data is streamed to the same laptop via Bluetooth. The coil center can be tracked with sub-millimeter accuracy while orientation angle is known to a fraction of a degree. This work illustrates the use of single-coil MIT in full, position-orientation-tracked scan mode while imaging laboratory phantoms. Phantoms are based upon simple materials having biologic conductivity (< 5 S/m), including a cut of bone-in steak. The goal is not just to reconstruct an image that contains the features of the actual target, but also return correct conductivity values for the various features within the image.

Action versus Result-Oriented Schemes in a Grassland Agroecosystem: A Dynamic Modelling Approach

PubMed Central

Sabatier, Rodolphe; Doyen, Luc; Tichit, Muriel

2012-01-01

Effects of agri-environment schemes (AES) on biodiversity remain controversial. While most AES are action-oriented, result-oriented and habitat-oriented schemes have recently been proposed as a solution to improve AES efficiency. The objective of this study was to compare action-oriented, habitat-oriented and result-oriented schemes in terms of ecological and productive performance as well as in terms of management flexibility. We developed a dynamic modelling approach based on the viable control framework to carry out a long term assessment of the three schemes in a grassland agroecosystem. The model explicitly links grazed grassland dynamics to bird population dynamics. It is applied to lapwing conservation in wet grasslands in France. We ran the model to assess the three AES scenarios. The model revealed the grazing strategies respecting ecological and productive constraints specific to each scheme. Grazing strategies were assessed by both their ecological and productive performance. The viable control approach made it possible to obtain the whole set of viable grazing strategies and therefore to quantify the management flexibility of the grassland agroecosystem. Our results showed that habitat and result-oriented scenarios led to much higher ecological performance than the action-oriented one. Differences in both ecological and productive performance between the habitat and result-oriented scenarios were limited. Flexibility of the grassland agroecosystem in the result-oriented scenario was much higher than in that of habitat-oriented scenario. Our model confirms the higher flexibility as well as the better ecological and productive performance of result-oriented schemes. A larger use of result-oriented schemes in conservation may also allow farmers to adapt their management to local conditions and to climatic variations. PMID:22496746

Variation and adaptation: learning from success in patient safety-oriented simulation training.

PubMed

Dieckmann, Peter; Patterson, Mary; Lahlou, Saadi; Mesman, Jessica; Nyström, Patrik; Krage, Ralf

2017-01-01

Simulation is traditionally used to reduce errors and their negative consequences. But according to modern safety theories, this focus overlooks the learning potential of the positive performance, which is much more common than errors. Therefore, a supplementary approach to simulation is needed to unfold its full potential. In our commentary, we describe the learning from success (LFS) approach to simulation and debriefing. Drawing on several theoretical frameworks, we suggest supplementing the widespread deficit-oriented, corrective approach to simulation with an approach that focusses on systematically understanding how good performance is produced in frequent (mundane) simulation scenarios. We advocate to investigate and optimize human activity based on the connected layers of any setting: the embodied competences of the healthcare professionals, the social and organizational rules that guide their actions, and the material aspects of the setting. We discuss implications of these theoretical perspectives for the design and conduct of simulation scenarios, post-simulation debriefings, and faculty development programs.

Inserting Thienyl Linkers into Conjugated Molecules for Efficient Multilevel Electronic Memory: A New Understanding of Charge-Trapping in Organic Materials.

PubMed

Li, Yang; Li, Hua; He, Jinghui; Xu, Qingfeng; Li, Najun; Chen, Dongyun; Lu, Jianmei

2016-03-18

The practical application of organic memory devices requires low power consumption and reliable device quality. Herein, we report that inserting thienyl units into D-π-A molecules can improve these parameters by tuning the texture of the film. Theoretical calculations revealed that introducing thienyl π bridges increased the planarity of the molecular backbone and extended the D-A conjugation. Thus, molecules with more thienyl spacers showed improved stacking and orientation in the film state relative to the substrates. The corresponding sandwiched memory devices showed enhanced ternary memory behavior, with lower threshold voltages and better repeatability. The conductive switching and variation in the performance of the memory devices were interpreted by using an extended-charge-trapping mechanism. Our study suggests that judicious molecular engineering can facilitate control of the orientation of the crystallite in the solid state to achieve superior multilevel memory performance. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Seismic slope-performance analysis: from hazard map to decision support system

USGS Publications Warehouse

Miles, Scott B.; Keefer, David K.; Ho, Carlton L.

1999-01-01

In response to the growing recognition of engineers and decision-makers of the regional effects of earthquake-induced landslides, this paper presents a general approach to conducting seismic landslide zonation, based on the popular Newmark's sliding block analogy for modeling coherent landslides. Four existing models based on the sliding block analogy are compared. The comparison shows that the models forecast notably different levels of slope performance. Considering this discrepancy along with the limitations of static maps as a decision tool, a spatial decision support system (SDSS) for seismic landslide analysis is proposed, which will support investigations over multiple scales for any number of earthquake scenarios and input conditions. Most importantly, the SDSS will allow use of any seismic landslide analysis model and zonation approach. Developments associated with the SDSS will produce an object-oriented model for encapsulating spatial data, an object-oriented specification to allow construction of models using modular objects, and a direct-manipulation, dynamic user-interface that adapts to the particular seismic landslide model configuration.

Auditory Localization Performance with Gamma Integrated Eye and Ear Protection

DTIC Science & Technology

2016-12-01

is unlimited. v List of Figures Fig. 1 IEEP device under test: shown with clear ballistic lens and Comply foam earphone tips...conducted with the system active. Fig. 1 IEEP device under test: shown with clear ballistic lens and Comply foam earphone tips. 1.2 Auditory...controlled acoustic facilities with large loudspeaker arrays. Method 1 has 2 listener orientations (0° and 45°) and specifies the use of 8

Large area silicon sheet by EFG

NASA Technical Reports Server (NTRS)

Morrison, A. D.; Ravi, K. V.; Rao, C. V. H.; Surek, T.; Bliss, D. F.; Garone, L. C.; Hogencamp, R. W.

1976-01-01

Progress in a program to produce high speed, thin, wide silicon sheets for fabricating 10% efficient solar cells is reported. An EFG ribbon growth system was used to perform growth rate and ribbon thickness experiments. A new, wide ribbon growth system was developed. A theoretical study of stresses in ribbons was also conducted. The EFG ribbons were observed to exhibit a characteristic defect structure which is orientation dependent in the early stages of growth.

Goal Orientations of General Chemistry Students via the Achievement Goal Framework

ERIC Educational Resources Information Center

Lewis, Scott E.

2018-01-01

The Achievement Goal Framework describes students' goal orientations as: task-based, focusing on the successful completion of the task; self-based, evaluating performance relative to one's own past performance; or other-based, evaluating performance relative to the performance of others. Goal orientations have been used to explain student success…

The spin-Hall effect and spin-orbit torques in epitaxial Co2FeAl/platinum bilayers

NASA Astrophysics Data System (ADS)

Peterson, T. A.; Liu, C.; McFadden, T.; Palmstrøm, C. J.; Crowell, P. A.

We have performed magnetoresistance measurements on epitaxially grown Co2FeAl/platinum (CFA/Pt) ultrathin ferromagnet/heavy metal bilayers to study the spin-Hall effect in Pt and the accompanying spin-orbit torque (SOT) exerted on the magnetic CFA layer. Specifically, we measure the spin-Hall magnetoresistance in the Pt layer by changing the orientation of the CFA magnetization with respect to the spin current orientation created in the Pt, and we determine the SOT efficiency using a second-harmonic detection technique. Because the latter of the two measurements is proportional to the spin-Hall ratio θSHE while the former is proportional to θSHE2, we are able to extract the bare Pt spin-Hall ratio with no assumptions about the CFA/Pt interface spin mixing conductance. Furthermore, by varying the Pt thickness we show that the results are consistent with resistivity-independent spin-Hall conductivity. Finally, the two measurements in combination allow us to infer a spin-mixing conductance at the CFA/Pt interface of 2 +/- 1 ×1015Ω-1m-2 . The combination of spin-Hall magnetoresistance and SOT measurements allows for a determination of the spin-mixing conductance using only low-frequency transport techniques. This work was supported by STARnet, a Semiconductor Research Corporation program, sponsored by MARCO and DARPA.

Predicting factors of positive orientation and attitudes towards nursing: A quantitative cross-sectional study.

PubMed

Ten Hoeve, Yvonne; Castelein, Stynke; Jansen, Wiebren; Jansen, Gerard; Roodbol, Petrie

2016-05-01

Previous studies have identified various reasons for students to choose a career in nursing. Students at the start of their programme hold a great variety of images and perceptions of nursing which can affect their orientation and attitudes towards their future profession. This paper aims to examine nursing students' orientation and attitudes towards nursing at the beginning of their educational programme, and to explore predictors of positive orientation and attitudes. The study used a quantitative cross-sectional design. A survey was conducted among first-year nursing students at four nursing universities of applied sciences in the Netherlands. Questionnaires were administered to all students enrolled in a bachelor of nursing programme (n=1414) at these universities. Respondents completed a survey consisting of: 1) Nursing Orientation Tool, 2) Nursing Attitude Questionnaire, and 3) demographic data such as gender, living status, nursing experience, preliminary training, first-choice programme, and career choice. Kruskal Wallis tests, with post hoc Mann Whitney U tests, were used to compare group scores. Multiple regression was performed to investigate predictors of positive orientation and attitudes towards nursing. Students in this study sample (n=1244) strongly agreed with statements related to caring, nursing expertise, professional nursing knowledge and the application of this knowledge. Predictors of positive orientation and attitudes towards nursing include having nursing/caring experience, indicating nursing as the first choice for study, preliminary vocational training, and a desire to make a career in nursing. Data from this survey suggest a link between personal and environmental characteristics and motivations to select nursing as a career. Understanding which factors predict positive orientation and attitudes towards nursing could offer educators a tool in the recruitment and selection assessment of new students. Copyright © 2016 Elsevier Ltd. All rights reserved.

Implementation of object-oriented programming in study of electrical race car

NASA Astrophysics Data System (ADS)

Nowak, M.; Baier, M.

2016-08-01

The paper covers issue of conducting advanced research of electrical race car participating in international competition called Sileverline Corporate Challenge. Process of designing race cars in Silesian Greenpower team is aided by a professional engine test stand built particularly in purpose of this research. Phase of testing and simulation is an important part of the implementation of new technologies. Properly developed solutions and test procedures are able to significantly shorten development time and reduce design costs. Testing process must be controlled by a modular and flexible application, easy to modify and ensuring safety. This paper describes the concept of object-oriented programming in LabVIEW and exemplary architecture of object-oriented control application designed to control engine test stand of the electrical race car. Eventually, the task of application will be to steer the electromagnetic brake and the engine load torque to perform according to data from the actual race track. During the designing process of the car, minimizing energy losses and maximizing powertrain efficiency are the main aspects taken into consideration. One of the crucial issues to accomplish these goals is to maintain optimal performance of the motor by applying effective cooling. The paper covers the research verifying the effectiveness of the cooling system.

Family factors related to children's intrinsic/extrinsic motivational orientation and academic performance.

PubMed

Ginsburg, G S; Bronstein, P

1993-10-01

This study examined 3 familial factors--parental surveillance of homework, parental reactions to grades, and general family style--in relation to children's motivational orientation and academic performance. Family, parent, and child measures were obtained in the home from 93 fifth graders and their parents. Teachers provided a measure of classroom motivational orientation, and grades and achievement scores were obtained from school records. Higher parental surveillance of homework, parental reactions to grades that included negative control, uninvolvement, or extrinsic reward, and over- and undercontrolling family styles were found to be related to an extrinsic motivational orientation and to lower academic performance. On the other hand, parental encouragement in response to grades children received was associated with an intrinsic motivational orientation, and autonomy-supporting family styles were associated with intrinsic motivation and higher academic performance. In addition, socioeconomic level was a significant predictor of motivational orientation and academic performance.

The dampening effect of employees' future orientation on cyberloafing behaviors: the mediating role of self-control.

PubMed

Zhang, Heyun; Zhao, Huanhuan; Liu, Jingxuan; Xu, Yan; Lu, Hui

2015-01-01

Previous studies on reducing employees' cyberloafing behaviors have primarily examined the external control factors but seldomly taken individual internal subjective factors into consideration. Future orientation, an important individual factor, is defined as the extent to which one plans for future time and considers future consequences of one's current behavior. To explore further whether and how employees' future orientation can dampen their cyberloafing behaviors, two studies were conducted to examine the relationship between employees' future orientation and cyberloafing behaviors. The mediation effect of employees' objective and subjective self-control between them was also examined. In Study 1, a set of questionnaires was completed, and the results revealed that the relationship between employees' future orientation and cyberloafing behaviors was negative, and objective self-control mediated the relationship. Next, we conducted a priming experiment (Study 2) to examine the causal relationship and psychological mechanism between employees' future orientation and cyberloafing behaviors. The results demonstrated that employees' future-orientation dampened their attitudes and intentions to engage in cyberloafing, and subjective self-control mediated this dampening effect. Theoretical and practical implications of these findings are also discussed.

A Study on the Difficulties of Learning Phase Transition in Object-Oriented Analysis and Design from the Viewpoint of Semantic Distance

ERIC Educational Resources Information Center

Shin, Shin-Shing

2015-01-01

Students in object-oriented analysis and design (OOAD) courses typically encounter difficulties transitioning from object-oriented analysis (OOA) to logical design (OOLD). This study conducted an empirical experiment to examine these learning difficulties by evaluating differences between OOA-to-OOLD and OOLD-to-object-oriented-physical-design…

Performance enhancement of fin attached ice-on-coil type thermal storage tank for different fin orientations using constrained and unconstrained simulations

NASA Astrophysics Data System (ADS)

Kim, M. H.; Duong, X. Q.; Chung, J. D.

2017-03-01

One of the drawbacks in latent thermal energy storage system is the slow charging and discharging time due to the low thermal conductivity of the phase change materials (PCM). This study numerically investigated the PCM melting process inside a finned tube to determine enhanced heat transfer performance. The influences of fin length and fin numbers were investigated. Also, two different fin orientations, a vertical and horizontal type, were examined, using two different simulation methods, constrained and unconstrained. The unconstrained simulation, which considers the density difference between the solid and liquid PCM showed approximately 40 % faster melting rate than that of constrained simulation. For a precise estimation of discharging performance, unconstrained simulation is essential. Thermal instability was found in the liquid layer below the solid PCM, which is contrary to the linear stability theory, due to the strong convection driven by heat flux from the coil wall. As the fin length increases, the area affected by the fin becomes larger, thus the discharging time becomes shorter. The discharging performance also increased as the fin number increased, but the enhancement of discharging performance by more than two fins was not discernible. The horizontal type shortened the complete melting time by approximately 10 % compared to the vertical type.

Experimental Analysis of the Effects of Inclination Angle and Working Fluid Amount on the Performance of a Heat Pipe

NASA Astrophysics Data System (ADS)

Mahdavi, Mahboobe; Tiari, Saeed; Qiu, Songgang

2016-11-01

Heat pipes are two-phase heat transfer devices, which operate based on evaporation and condensation of a working fluid inside a sealed container. In the current work, an experimental study was conducted to investigate the performance of a copper-water heat pipe. The performance was evaluated by calculating the corresponding thermal resistance as the ratio of temperature difference between evaporator and condenser to heat input. The effects of inclination angle and the amount of working fluid were studied on the equivalent thermal resistance. The results showed that if the heat pipe is under-filled with the working fluid, energy transferring capacity of the heat pipe decreases dramatically. However, overfilling heat pipe causes over flood and degrades heat pipe performance. The minimum thermal resistances were obtained for the case that 30% of the heat pipe volume was filled with working fluid. It was also found that in gravity-assisted orientations, the inclination angle does not have significant effect on the performance of the heat pipe. However, for gravity-opposed orientations, as the inclination angle increases, the temperature difference between the evaporator and condensation increases and higher thermal resistances are obtained. Authors appreciate the financial support by a research Grant from Temple University.

Orientation effects on the measurement and analysis of critical CTOA in an aluminum alloy sheet

NASA Technical Reports Server (NTRS)

Sutton, M. A.; Dawicke, D. S.; Newman, J. C., Jr.

1994-01-01

Fracture tests were conducted on 76.2mm wide, 2.3mm thick middle crack tension (M(T)) specimens machined from 2024-T3 aluminum sheet. The specimens were tested on the T-L orientation and comparisons were made to similar tests conducted in the L-T orientation. Measurement of critical crack tip opening angle (CTOA), applied stress, and crack front shape were made as a function of crack extension. A two-dimensional, elastic-plastic finite element analysis was used to simulate the fracture behavior for both orientations. The results indicate that the T-L orientation had a 10 percent lower stress at fracture than similar tests conducted in the L-T orientation. Correspondingly, the critical CTOA in the T-L tests reached a constant value of 4.7 degrees after 2-3mm of crack extension and the L-T tests reached a value of 6 degrees. The fracture surfaces of the T-L specimens were observed to remain flat, while those of the L-T specimens transitioned to a 45 degree slant fracture after about 2-3mm of crack extension. The tunneling behavior of the two orientations also differed; the T-L specimens reached a deeply tunneled stabilized crack front shape while, the L-T specimens were observed to have only a small amount of tunneling once the crack began to grow on the 45 degree slant. The two-dimensional, elastic-plastic finite element analysis was able to simulate the fracture behavior for both the T-L and L-T orientations.

Assessment of government tribology programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, M.B.; Levinson, T.M.

1985-09-01

An assessment has been made to determine current tribology research and development work sponsored or conducted by the government. Data base surveys and discussions were conducted to isolate current projects sponsored primarily by 21 different government organizations. These projects were classified by subject, objective, energy relevance, type of research, phenomenon being investigated, variables being studied, type of motion, materials and application. An abstract of each project was prepared which included the classification, sponsor, performing organization and a project description. It was found that current work is primarily materials oriented to meet military requirements. Other than the high temperature programs verymore » few of the tribology projects accomplish energy related objectives.« less

Realistic training for effective crew performance

NASA Technical Reports Server (NTRS)

Foushee, H. C.

1985-01-01

Evaluation of incident and accident statistics reveals that most problems occur not because of a lack of proficiency in pilot training, but because of the inability to coordinate skills into effective courses of action. Line-Oriented Flight Training (LOFT) and Cockpit Resource Management (CRM) programs provide training which will develop both individual crew member skills, as well as those associated with effective group function. A study conducted by NASA at the request of the U.S. Congress supports the argument for training that enhances crew performance in addition to providing individual technical skills, and is described in detail.

Effects of orientation on Rey complex figure performance.

PubMed

Ferraro, F Richard; Grossman, Jennifer; Bren, Amy; Hoverson, Allysa

2002-10-01

An experiment was performed that examined the impact of stimulus orientation on performance on the Rey complex figure. A total of 48 undergraduates (24 men, 24 women) were randomly assigned to one of four Rey figure orientation groups (0 degrees, 90 degrees, 180 degrees, and 270 degrees ). Participants followed standard procedures for the Rey figure, initially copying it in whatever orientation group they were assigned to. Next, all participants performed a 15-20 min lexical decision experiment, used as a filler task. Finally, and unbeknownest to them, participants were asked to recall as much of the figure as they could. As expected, results revealed a main effect of Task (F = 83.92, p < .01), in which copy performance was superior to recall performance. However, the main effect for orientation was not significant, nor did orientation interact with task (Fs < .68, ps > .57). The results are important from an applied setting, especially if testing conditions are less than optimal and a fixed stimulus position is not possible (e.g., testing at the bedside).

Achievement Goal Orientations and Adolescents’ Subjective Well-Being in School: The Mediating Roles of Academic Social Comparison Directions

PubMed Central

Tian, Lili; Yu, Tingting; Huebner, E. Scott

2017-01-01

The purpose of this study was to examine the multiple mediational roles of academic social comparison directions (upward academic social comparison and downward academic social comparison) on the relationships between achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and subjective well-being (SWB) in school (school satisfaction, school affect) in adolescent students in China. A total of 883 Chinese adolescent students (430 males; Mean age = 12.99) completed a multi-measure questionnaire. Structural equation modeling was used to examine the hypotheses. Results indicated that (1) mastery goal orientations and performance-approach goal orientations both showed a statistically significant, positive correlation with SWB in school whereas performance-avoidance goal orientations showed a statistically significant, negative correlation with SWB in school among adolescents; (2) upward academic social comparisons mediated the relation between the three types of achievement goal orientations (i.e., mastery goals, performance-approach goals, and performance-avoidance goals) and SWB in school; (3) downward academic social comparisons mediated the relation between mastery goal orientations and SWB in school as well as the relation between performance-avoidance goal orientations and SWB in school. The findings suggest possible important cultural differences in the antecedents of SWB in school in adolescent students in China compared to adolescent students in Western nations. PMID:28197109

Mindfulness training modifies subsystems of attention.

PubMed

Jha, Amism P; Krompinger, Jason; Baime, Michael J

2007-06-01

Mindfulness is defined as paying attention in the present moment. We investigate the hypothesis that mindfulness training may alter or enhance specific aspects of attention. We examined three functionally and neuroanatomically distinct but overlapping attentional subsystems: alerting, orienting, and conflict monitoring. Functioning of each subsystem was indexed by performance on the Attention Network Test. Two types of mindfulness training (MT) programs were examined, and behavioral testing was conducted on participants before (Time 1) and after (Time 2) training. One training group consisted of individuals naive to mindfulness techniques who participated in an 8-week mindfulness-based stress reduction (MBSR) course that emphasized the development of concentrative meditation skills. The other training group consisted of individuals experienced in concentrative meditation techniques who participated in a 1-month intensive mindfulness retreat. Performance of these groups was compared with that of control participants who were meditation naive and received no MT. At Time 1, the participants in the retreat group demonstrated improved conflict monitoring performance relative to those in the MBSR and control groups. At Time 2, the participants in the MBSR course demonstrated significantly improved orienting in comparison with the control and retreat participants. In contrast, the participants in the retreat group demonstrated altered performance on the alerting component, with improvements in exogenous stimulus detection in comparison with the control and MBSR participants. The groups did not differ in conflict monitoring performance at Time 2. These results suggest that mindfulness training may improve attention-related behavioral responses by enhancing functioning of specific subcomponents of attention. Whereas participation in the MBSR course improved the ability to endogenously orient attention, retreat participation appeared to allow for the development and emergence of receptive attentional skills, which improved exogenous alerting-related process.

The Role of Motivating Tasks and Personal Goal Orientations in Students' Coping Strategies in Science

ERIC Educational Resources Information Center

Subasi, Münevver; Tas, Yasemin

2016-01-01

This study aims to investigate coping strategies of middle school students in science classes in relation to students' goal orientations and motivating tasks conducted in the classroom environment. The study was conducted in spring semester of 2015-2016 academic year. Sample of the study consists of 316 middle school students receiving education…

Thermal characterization of three-dimensional printed components for light-emitting diode lighting system applications

NASA Astrophysics Data System (ADS)

Perera, Indika U.; Narendran, Nadarajah; Terentyeva, Valeria

2018-04-01

This study investigated the thermal properties of three-dimensional (3-D) printed components with the potential to be used for thermal management in light-emitting diode (LED) applications. Commercially available filament materials with and without a metal filler were characterized with changes to the print orientation. 3-D printed components with an in-plane orientation had >30 % better effective thermal conductivity compared with components printed with a cross-plane orientation. A finite-element analysis was modeled to understand the effective thermal conductivity changes in the 3-D printed components. A simple thermal resistance model was used to estimate the required effective thermal conductivity of the 3-D printed components to be a viable alternative in LED thermal management applications.

ACE DD genotype is unfavorable to Korean short-term muscle power athletes.

PubMed

Kim, C-H; Cho, J-Y; Jeon, J Y; Koh, Y G; Kim, Y-M; Kim, H-J; Park, M; Um, H-S; Kim, C

2010-01-01

The purpose of this study was to test the hypothesis that the ACE DD genotype is unfavorably associated with the ultimate power-oriented performance. To test the hypothesis we recruited a total of 848 subjects including 55 international level power-oriented athletes (High-performance), 100 national level power-oriented athletes (Mid-performance) and 693 healthy controls (Control) in Korea. Then the distributions of ACE polymorphism throughout these groups were analyzed. As a result, there was a gradual decrease of frequencies of the DD genotype with advancing levels of performance (Control vs. Mid-performance vs. High-performance=17.2% vs. 10.0% vs. 5.5%, p=0.002). Also, the frequencies of D allele decreased gradually with advancing levels of performance (Control vs. Mid-performance vs. High-performance=42.6% vs. 35.0% vs. 30.9%, p<0.01). Therefore, power-oriented athletes at the top level had a markedly diminished frequency of the DD genotype and the D allele. This finding gave 3.83 times lower probability of success in power-oriented sports for individuals with the DD genotype than those with the II+ ID genotype. In conclusion, these results indicate that Korean power-oriented athletes with a lower frequency of the DD genotype had a lower probability of success in power-oriented sports. Georg Thieme Verlag KG Stuttgart, New York.

Linking quality and performance. Quality orientation can be a competitive strategy for health care providers.

PubMed

Rapert, M I; Babakus, E

1996-01-01

Many organizations are not convinced a quality orientation pays off and are looking for ways to link quality with performance. The authors' exploratory study found that a quality orientation is a differentiating factor between low-performing and high-performing general service hospitals. They also developed a quality scale to assess the performance implications of quality-based strategies in the health care industry. Successful health care organizations (1) develop a strategic quality orientation at the management level, (2) support the pursuit of quality at the contact level, and (3) monitor external customers' perceptions of quality.

Relationship among achievement goal orientations and multidimensional situational motivation in physical education.

PubMed

Standage, Martyn; Treasure, Darren C

2002-03-01

Contemporary research suggests that task and ego achievement goal orientations affect students' intrinsic motivation in physical education. This research has assessed intrinsic motivation as a unidimensional contruct, however, which is inconsistent with the more contemporary postulates of self-determination theory (Deci & Ryan, 1985, 1991) which states that intrinsic motivation is only one type of motivation. To date, research has not addressed whether different types of motivation at the situational level are influenced by the proneness to adopt task or ego involvement. To examine the relationship between achievement goal orientations and multidimensional situational motivation in PE. Middle school children (182 male, 136 female; M age = 13.2 years). Responded to questionnaires assessing their dispositional goal orientation (POSQ; Roberts, Treasure, & Balague, 1998) and situational motivation (SIMS; Guay, Vallerand, & Blanchard, 2000) in PE. Task orientation was found to be positively associated with more self-determined types of situational motivation. Ego orientation was weakly related to less self-determined motivation. An extreme group split was conducted to create four goal groups and goal profile analyses conducted. A significant MANOVA was followed by univariate analyses, post hoc comparisons, and calculated effect sizes, which revealed that groups high in task orientation reported more motivationally adaptive responses than groups low in task orientation. The results suggest that a high level of task orientation singularly or in combination with ego orientation fosters self-determined situational motivation in the context of PE.

Thrust Stand for Vertically Oriented Electric Propulsion Performance Evaluation

NASA Technical Reports Server (NTRS)

Moeller, Trevor; Polzin, Kurt A.

2010-01-01

A variation of a hanging pendulum thrust stand capable of measuring the performance of an electric thruster operating in the vertical orientation is presented. The vertical orientation of the thruster dictates that the thruster must be horizontally offset from the pendulum pivot arm, necessitating the use of a counterweight system to provide a neutrally-stable system. Motion of the pendulum arm is transferred through a balance mechanism to a secondary arm on which deflection is measured. A non-contact light-based transducer is used to measure displacement of the secondary beam. The members experience very little friction, rotating on twisting torsional pivots with oscillatory motion attenuated by a passive, eddy current damper. Displacement is calibrated using an in situ thrust calibration system. Thermal management and self-leveling systems are incorporated to mitigate thermal and mechanical drifts. Gravitational restoring force and torsional spring constants associated with flexure pivots provide restoring moments. An analysis of the design indicates that the thrust measurement range spans roughly four decades, with the stand capable of measuring thrust up to 12 N for a 200 kg thruster and up to approximately 800 mN for a 10 kg thruster. Data obtained from calibration tests performed using a 26.8 lbm simulated thruster indicated a resolution of 1 mN on 100 mN-level thrusts, while those tests conducted on 200 lbm thruster yielded a resolution of roughly 2.5 micro at thrust levels of 0.5 N and greater.

Thrust stand for vertically oriented electric propulsion performance evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moeller, Trevor; Polzin, Kurt A.

A variation of a hanging pendulum thrust stand capable of measuring the performance of an electric thruster operating in the vertical orientation is presented. The vertical orientation of the thruster dictates that the thruster must be horizontally offset from the pendulum pivot arm, necessitating the use of a counterweight system to provide a neutrally stable system. Motion of the pendulum arm is transferred through a balance mechanism to a secondary arm on which deflection is measured. A noncontact light-based transducer is used to measure displacement of the secondary beam. The members experience very little friction, rotating on twisting torsional pivotsmore » with oscillatory motion attenuated by a passive, eddy-current damper. Displacement is calibrated using an in situ thrust calibration system. Thermal management and self-leveling systems are incorporated to mitigate thermal and mechanical drifts. Gravitational force and torsional spring constants associated with flexure pivots provide restoring moments. An analysis of the design indicates that the thrust measurement range spans roughly four decades, with the stand capable of measuring thrust up to 12 N for a 200 kg thruster and up to approximately 800 mN for a 10 kg thruster. Data obtained from calibration tests performed using a 26.8 lbm simulated thruster indicated a resolution of 1 mN on 100 mN level thrusts, while those tests conducted on a 200 lbm thruster yielded a resolution of roughly 2.5 mN at thrust levels of 0.5 N and greater.« less

Primary care practice and facility quality orientation: influence on breast and cervical cancer screening rates.

PubMed

Goldzweig, Caroline Lubick; Parkerton, Patricia H; Washington, Donna L; Lanto, Andrew B; Yano, Elizabeth M

2004-04-01

Despite the importance of early cancer detection, variation in screening rates among physicians is high. Insights into factors influencing variation can guide efforts to decrease variation and increase screening rates. To explore the association of primary care practice features and a facility's quality orientation with breast and cervical cancer screening rates. Cross-sectional study of screening rates among 144 Department of Veterans Affairs (VA) medical centers and for a national sample of women. We linked practice structure and quality improvement characteristics of individual VA medical centers from 2 national surveys (1 to primary care directors and 1 to a stratified random sample of employees) to breast and cervical cancer screening rates determined from a review of random medical records. We conducted bivariate analyses and multivariate logistic regression of primary care practice and facility features on cancer screening rates, above and below the median. While the national screening rates were high for breast (87%) and cervical cancer (90%), higher screening rates were more likely when primary care providers were consistently notified of specialty visits and when staff perceived a greater organizational commitment to quality and anticipated rewards and recognition for better performance. Organization and quality orientation of the primary care practice and its facility can enhance breast and cervical cancer screening rates. Internal recognition of quality performance and an overall commitment to quality improvement may foster improved prevention performance, with impact varying by clinical service.

Microstructure and photovoltaic performance of polycrystalline silicon thin films on temperature-stable ZnO:Al layers

NASA Astrophysics Data System (ADS)

Becker, C.; Ruske, F.; Sontheimer, T.; Gorka, B.; Bloeck, U.; Gall, S.; Rech, B.

2009-10-01

Polycrystalline silicon (poly-Si) thin films have been prepared by electron-beam evaporation and thermal annealing for the development of thin-film solar cells on glass coated with ZnO:Al as a transparent, conductive layer. The poly-Si microstructure and photovoltaic performance were investigated as functions of the deposition temperature by Raman spectroscopy, scanning and transmission electron microscopies including defect analysis, x-ray diffraction, external quantum efficiency, and open circuit measurements. It is found that two temperature regimes can be distinguished: Poly-Si films fabricated by deposition at low temperatures (Tdep<400 °C) and a subsequent thermal solid phase crystallization step exhibit 1-3 μm large, randomly oriented grains, but a quite poor photovoltaic performance. However, silicon films deposited at higher temperatures (Tdep>400 °C) directly in crystalline phase reveal columnar, up to 300 nm big crystals with a strong ⟨110⟩ orientation and much better solar cell parameters. It can be concluded from the results that the electrical quality of the material, reflected by the open circuit voltage of the solar cell, only marginally depends on crystal size and shape but rather on the intragrain properties of the material. The carrier collection, described by the short circuit current of the cell, seems to be positively influenced by preferential ⟨110⟩ orientation of the grains. The correlation between experimental, microstructural, and photovoltaic parameters will be discussed in detail.

Assessment of MARMOT. A Mesoscale Fuel Performance Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tonks, M. R.; Schwen, D.; Zhang, Y.

2015-04-01

MARMOT is the mesoscale fuel performance code under development as part of the US DOE Nuclear Energy Advanced Modeling and Simulation Program. In this report, we provide a high level summary of MARMOT, its capabilities, and its current state of validation. The purpose of MARMOT is to predict the coevolution of microstructure and material properties of nuclear fuel and cladding. It accomplished this using the phase field method coupled to solid mechanics and heat conduction. MARMOT is based on the Multiphysics Object-Oriented Simulation Environment (MOOSE), and much of its basic capability in the areas of the phase field method, mechanics,more » and heat conduction come directly from MOOSE modules. However, additional capability specific to fuel and cladding is available in MARMOT. While some validation of MARMOT has been completed in the areas of fission gas behavior and grain growth, much more validation needs to be conducted. However, new mesoscale data needs to be obtained in order to complete this validation.« less

A conceptual model of nurses' goal orientation, service behavior, and service performance.

PubMed

Chien, Chun-Cheng; Chou, Hsin-Kai; Hung, Shuo-Tsung

2008-01-01

Based on the conceptual framework known as the "service triangle," the authors constructed a model of nurses' goal orientation, service behavior, and service performance to investigate the antecedents and consequences of the medical service behavior provided by nurses. This cross-sectional study collected data from 127 nurses in six hospitals using a mail-in questionnaire. Analysis of the model revealed that the customer-oriented behavior of nurses had a positive influence on organizational citizenship behavior; and both of these behaviors had a significant positive influence on service performance. The results also indicate that a higher learning goal orientation among nurses was associated with the performance of both observable customer-oriented behavior and organizational-citizenship behavior.

Enabling people with developmental disabilities to actively perform designated occupational activities according to simple instructions with a Nintendo Wii Remote Controller by controlling environmental stimulation.

PubMed

Shih, Ching-Hsiang; Wang, Shu-Hui; Chang, Man-Ling; Shih, Ching-Hsiang

2012-01-01

The latest researches have adopted software technology, turning the Nintendo Wii Remote Controller into a high performance three-dimensional object orientation detector. This study extended Wii Remote Controller functionality to assess whether two people with developmental disabilities would be able to actively perform designated simple occupational activities according to simple instructions by controlling their favorite environmental stimulation using a Nintendo Wii Remote Controller. This study was conducted using ABAB designs. The data showed that both participants significantly increased their target response (performing a designated occupational activity) by activating the control system to produce their preferred environmental stimulation during the intervention phases. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effect of crystal orientation on conductivity and electron mobility in single-crystal alumina

NASA Technical Reports Server (NTRS)

Will, Fritz G.; Delorenzi, Horst G.; Janora, Kevin H.

1992-01-01

The electrical conductivity of high-purity, single-crystal alumina is determined parallel to and perpendicular to the c-axis. The mean conductivity of four samples of each orientation is a factor 3.3 higher parallel to the c-axis than perpendicular to it. The conductivity as a function of temperature is attributed to extrinsic electron conduction at temperatures from 400 to 900 C, and intrinsic semiconduction at temperatures from 900 to 1300 C. In the high-temperature regime, the slope on all eight specimens is 4.7 +/- 0.1 eV. Hence, the thermal bandgap at O K is 9.4 +/- 0.2 eV.

Thermal conductivity of solid monohydroxyl alcohols in polyamorphous states

NASA Astrophysics Data System (ADS)

Krivchikov, A. I.; Korolyuk, O. A.; Sharapova, I. V.

2012-01-01

New measurements of the thermal conductivity of solid ethyl alcohol C2H5OH in the interval from 2 K to the melting temperature are presented. An annealing effect in the thermal conductivity of the orientationally ordered phase of the alcohol has been observed over a wide range of temperatures. This phase was obtained as a result of an irreversible first-order phase transition from an orientationally disordered crystal with a cubic structure at T = 109 K. The thermal conductivity was observed to increase as the monoclinic lattice changed from a less stable phase to a more stable one. The growth may be due to the improved quality of the completely ordered crystal. A comparative analysis of the temperature dependences of the thermal conductivity κ(T) is made for the solid monohydroxyl alcohols CH3OH, C2H5OH, С2D5OD, C3H7OH, and C4H9OH in their disordered orientational and structural states. At low temperatures the thermal conductivity of the series of monohydroxyl structural glasses of the alcohols increases linearly with the mass of the alcohol molecule.

Relationship between Running Speed and Cognitive Processes in Orienteering: Two Empirical Studies.

ERIC Educational Resources Information Center

Cheshikhina, Valentina V.

1993-01-01

Fourteen qualified orienteers completed a stepwise increased treadmill velocity test in which controls had to be transferred from a master map. Orienteering accuracy was greatest at the anaerobic threshold speed. In a second study, 17 orienteers performed arithmetic tasks before and after a treadmill workout. Performance was significantly better…

Performance of First-Tour WAC Enlisted Women: Data Base for the Performance Orientation of Women's Basic Training. Final Report.

ERIC Educational Resources Information Center

Boyd, H. Alton; And Others

The introduction of performance-oriented instructional procedures into Women's Basic Training (BT) at Fort McClellan and the revision of Army Training Program 21-121 to incorporate the philosophy and principles of performance-oriented training are described in the document. Results from a questionnaire regarding duties, activities, and attitudes…

Scaling relation of the anomalous Hall effect in (Ga,Mn)As

NASA Astrophysics Data System (ADS)

Glunk, M.; Daeubler, J.; Schoch, W.; Sauer, R.; Limmer, W.

2009-09-01

We present magnetotransport studies performed on an extended set of (Ga,Mn)As samples at 4.2 K with longitudinal conductivities σxx ranging from the low-conductivity to the high-conductivity regime. The anomalous Hall conductivity σxy(AH) is extracted from the measured longitudinal and Hall resistivities. A transition from σxy(AH)=20Ω-1cm-1 due to the Berry phase effect in the high-conductivity regime to a scaling relation σxy(AH)∝σxx1.6 for low-conductivity samples is observed. This scaling relation is consistent with a recently developed unified theory of the anomalous Hall effect in the framework of the Keldysh formalism. It turns out to be independent of crystallographic orientation, growth conditions, Mn concentration, and strain, and can therefore be considered universal for low-conductivity (Ga,Mn)As. The relation plays a crucial role when deriving values of the hole concentration from magnetotransport measurements in low-conductivity (Ga,Mn)As. In addition, the hole diffusion constants for the high-conductivity samples are determined from the measured longitudinal conductivities.

Vacuum chamber for containing particle beams

DOEpatents

Harvey, A.

1985-11-26

A vacuum chamber for containing a charged particle beam in a rapidly changing magnetic environment comprises a ceramic pipe with conducting strips oriented along the longitudinal axis of the pipe and with circumferential conducting bands oriented perpendicular to the longitudinal axis but joined with a single longitudinal electrical connection. When both strips and bands are on the outside of the ceramic pipe, insulated from each other, a high-resistance conductive layer such as nickel can be coated on the inside of the pipe.

Student Orientation in Higher Education: Development of the Construct

ERIC Educational Resources Information Center

Alnawas, Ibrahim

2015-01-01

This paper argues that student orientation (SO) is a high order construct that should be measured formatively rather than reflectively. Using a discovery-oriented approach, conducted by supplementing educational and marketing literatures with in depth interviews from 23 academic staff in seven different universities, the authors identified three…

Program Evaluation: Two Management-Oriented Samples

ERIC Educational Resources Information Center

Alford, Kenneth Ray

2010-01-01

Two Management-Oriented Samples details two examples of the management-oriented approach to program evaluation. Kenneth Alford, a doctorate candidate at the University of the Cumberlands, details two separate program evaluations conducted in his school district and seeks to compare and contrast the two evaluations based upon the characteristics of…

Orienting to Eye Gaze and Face Processing

ERIC Educational Resources Information Center

Tipples, Jason

2005-01-01

The author conducted 7 experiments to examine possible interactions between orienting to eye gaze and specific forms of face processing. Participants classified a letter following either an upright or inverted face with averted, uninformative eye gaze. Eye gaze orienting effects were recorded for upright and inverted faces, irrespective of whether…

Brock BaseCamp--Outdoor Orientation Programs Come to Canada

ERIC Educational Resources Information Center

O'Connell, Tim

2011-01-01

What exactly is an "outdoor orientation program?" First offered in the United States in the 1930s by Dartmouth College, outdoor orientation programs (OOPs) use adventure programming to help incoming students adjust to university or college. Typically, these programs are conducted in a wilderness or backcountry setting, are several days…

Motor Transport Operator Training: An Approach to Preparing Training Managers and Instructors to Design, Conduct, and Evaluate Performance Oriented Training

DTIC Science & Technology

1977-09-01

the needed knowledge and skills must be provided. Ideally, these programs should be self- contained , capable of easy administration within...type of vehicle, duplicate cards were prepared. In effect, a task file was prepared, the file containing cards which described the task and...test situation contains a description of the situation. (If the operator does not actually encounter the situation, the situation is read to him by

NMR Evidences of the Coupling between Conduction Electrons and Molecular Degrees of Freedom in the Exotic Member of the Bechgaard Salt (TMTSF)2FSO3

NASA Astrophysics Data System (ADS)

Satsukawa, Hidetaka; Yajima, Akio; Hiraki, Ko-ichi; Takahashi, Toshihiro; Kang, Haeyong; Jo, Younjung; Kang, Woun; Chung, Ok-Hee

2016-12-01

We performed 77Se- and 19F-NMR measurements on single crystals of (TMTSF)2FSO3 to characterize the electronic structures of different phases in the temperature-pressure phase diagram, determined by precise transport measurements [Jo et al., Phys. Rev. B 67, 014516 (2003)]. We claim that such varieties of electronic states in the refined phase diagram are caused by strong couplings of the conduction electrons with FSO3 anions, especially with the permanent electric dipoles on the anions. We suggest that as temperature decreases, the FSO3 anions form orientational ordering through two steps; first, only the tetrahedrons form an orientational order leaving the orientations of the electronic dipoles in random (transition I); then the dipoles form a perfect orientational order at a lower temperature (transition II). In the intermediate temperature range between transitions I and II, we found an appreciable enhancement of homogeneous and inhomogeneous widths of the 77Se-NMR spectrum. From the analysis of the angular dependence of the linewidth, we attributed these anomalies to the intramolecular charge disproportionation or imbalance and its slow dynamics caused by the coupling with the permanent electric dipole of the anion. Results of 19F-NMR relaxation and lineshape measurements support this picture very well. Electronic structures at higher pressures up to 1.25 GPa are discussed on the basis of the results of the 77Se- and 19F-NMR measurements.

Homosexuality and Personnel Security

DTIC Science & Technology

1991-09-01

conduct. Masturbation , lascivious conduct, and nonprocreative sex were proscribed. "You shall not lie with a man as with a woman, that is an...determine what an individual’s sexual orientation will be, although the orientation itself awaits the onset of puberty to be activated, and may not...any nonprocreative sexual activity, including masturbation , oral-genital contact between husband and wife, and attending sexually explicit movies

Growth of Highly c-axis Oriented and/or Epitaxial Single-Domain b-axis Oriented La5Ca9Cu24O41 Thin Films by Pulsed Laser Deposition

DTIC Science & Technology

2016-04-01

project attempted to grow La5Ca9Cu24O41 (LCCO) films on important substrates with the high- thermal -conductivity direction parallel or perpendicular...to the surface of the substrate, counting success as demonstration of b-axis or c-axis oriented LCCO films along with measurement of bulk thermal ...deposition, LCCO, La5Ca9Cu24O41, thermal conductivity, epitaxy 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER OF PAGES 24

Measuring market orientation: further evidence on Narver and Slater's three-component scale.

PubMed

Chakrabarty, Subhra; Rogé, Joseph N

2003-12-01

A mail survey of a national random sample of 2,000 marketing managers was conducted. The data provided by 222 respondents were analyzed to assess the dimensionality of Narver and Slater's 15-item measure of market orientation. A confirmatory factor analysis, using LISREL 8.53, provided support for each of the separate dimensions of customer orientation, competitor orientation, and interfunctional coordination. However, a combined 3-factor model of market orientation was not supported. Directions for research are suggested.

Organic Photovoltaic Devices Based on Oriented n-Type Molecular Films Deposited on Oriented Polythiophene Films.

PubMed

Mizokuro, Toshiko; Tanigaki, Nobutaka; Miyadera, Tetsuhiko; Shibata, Yousei; Koganezawa, Tomoyuki

2018-04-01

The molecular orientation of π-conjugated molecules has been reported to significantly affect the performance of organic photovoltaic devices (OPVs) based on molecular films. Hence, the control of molecular orientation is a key issue toward the improvement of OPV performance. In this research, oriented thin films of an n-type molecule, 3,4,9,10-Perylenetetracarboxylic Bisbenzimida-zole (PTCBI), were formed by deposition on in-plane oriented polythiophene (PT) films. Orientation of the PTCBI films was evaluated by polarized UV-vis spectroscopy and 2D-Grazing incidence X-ray diffraction. Results indicated that PTCBI molecules on PT film exhibit nearly edge-on and in-plane orientation (with molecular long axis along the substrate), whereas PTCBI molecules without PT film exhibit neither. OPVs composed of PTCBI molecular film with and without PT were fabricated and evaluated for correlation of orientation with performance. The OPVs composed of PTCBI film with PT showed higher power conversion efficiency (PCE) than that of film without PT. The experiment indicated that in-plane orientation of PTCBI molecules absorbs incident light more efficiently, leading to increase in PCE.

Thermal Conductivity Anisotropy of Metasedimentary and Igneous Rocks

NASA Astrophysics Data System (ADS)

Davis, M. G.; Chapman, D. S.; van Wagoner, T. M.; Armstrong, P. A.

2005-12-01

Thermal conductivity anisotropy was determined for two sets of rocks: a series of sandstones, mudstones, and limey shales of Cretaceous age from Price Canyon, Utah, and metasedimentary argillites and quartzites of Precambrian age from the Big Cottonwood Formation in north central Utah. Additional anisotropy measurements were made on granitic rocks from two Tertiary plutons in Little Cottonwood Canyon, north central Utah. Most conductivity measurements were made in transient mode with a half-space, line-source instrument oriented in two orthogonal directions on a flat face cut perpendicular to bedding. One orientation of the probe yields thermal conductivity parallel to bedding (kmax) directly, the other orientation of the probe measures a product of conductivities parallel and perpendicular to bedding from which the perpendicular conductivity (kperp) is calculated. Some direct measurements of kmax and kperp were made on oriented cylindrical discs using a conventional divided bar device in steady-state mode. Anisotropy is defined as kmax/kperp. The Precambrian argillites from Big Cottonwood Canyon have anisotropy values from 0.8 to 2.1 with corresponding conductivity perpendicular to bedding of 2.0 to 6.2 W m-1 K-1. Anisotropy values for the Price Canyon samples are less than 1.2 with a mean of 1.04 although thermal conductivity perpendicular to bedding for the samples varied from 1.3 to 5.0 W m-1 K-1. The granitic rocks were found to be essentially isotropic with thermal conductivity perpendicular to bedding having a range of 2.2 to 3.2 W m-1 K-1 and a mean of 2.68 W m-1 K-1. The results confirm the observation by Deming (1994) that anisotropy is negligible for rocks having kperp greater than 4.0 W m-1 K-1 and generally increases for low conductivity metamorphic and clay-rich rocks. There is little evidence, however, for his suggestion that thermal conductivity anisotropy of all rocks increases systematically to about 2.5 for low thermal conductivity rocks.

Electronic Transport Properties of Bismuth Microwire Arrays

NASA Astrophysics Data System (ADS)

Solomon, S.; Huber, T. E.; Bouffard, M.; Graf, M. J.

2002-03-01

Bulk Bi, a semimetal, and Bi-Sb, have the highest thermoelectric figure of merit Z at 100 K. The thermoelectric properties of these materials are strongly anisotropic. The best thermoelectric performance is observed when the electrical current flows along the trigonal axis. However, Bi single crystals are easily cleaved along the trigonal planes. This lack of strength has largely prevented the use of these materials in practical thermoelectric coolers. Composite technology offers the opportunity to increase the toughness of Bi and Bi-Sb. Also, microengineering Bi into composites may lead to a significant improvement in their thermoelectric performance, because of the reduction of phonon conductivity from phonon scattering at the grain boundaries and interfaces. X-ray diffraction studies show that the microwires in the array are highly oriented along the crystal direction normal to the (003) lattice plane of the rombohedral crystal structure of Bi . Measurements of the resistance of arrays of 3 mm and 10 mm diameter wires have been carried out over a wide range of temperatures (1.8 K 300 K) and magnetic fields (0-8 T), and orientations of the sample with respect to the magnetic field (0-90o) which includes the magnetic and transverse orientation. The zero field resistivity was studied and it was found that, at low temperatures, the wire boundary scattering is the dominant process. The longitudinal magnetoresistance is negative, in contrast to the longitudinal magnetoresistance of bulk crystals oriented in direction perpendicular to the trigonal plane of the rhombohedral crystal lattice who exhibit negligible magnetoresistance. This results are interpreted in terms of a size effect. Research supported by NASA and NSF.

Assessing does not mean threatening: the purpose of assessment as a key determinant of girls' and boys' performance in a science class.

PubMed

Souchal, Carine; Toczek, Marie-Christine; Darnon, Céline; Smeding, Annique; Butera, Fabrizio; Martinot, Delphine

2014-03-01

Is it possible to reach performance equality between boys and girls in a science class? Given the stereotypes targeting their groups in scientific domains, diagnostic contexts generally lower girls' performance and non-diagnostic contexts may harm boys' performance. The present study tested the effectiveness of a mastery-oriented assessment, allowing both boys and girls to perform at an optimal level in a science class. Participants were 120 boys and 72 girls (all high-school students). Participants attended a science lesson while expecting a performance-oriented assessment (i.e., an assessment designed to compare and select students), a mastery-oriented assessment (i.e., an assessment designed to help students in their learning), or no assessment of this lesson. In the mastery-oriented assessment condition, both boys and girls performed at a similarly high level, whereas the performance-oriented assessment condition reduced girls' performance and the no-assessment condition reduced boys' performance. One way to increase girls' performance on a science test without harming boys' performance is to present assessment as a tool for improving mastery rather than as a tool for comparing performances. © 2013 The British Psychological Society.

Does Goal Orientation Matter for Trait Anxiety, Self-Efficacy and Performance? An Investigation in University Athletes

ERIC Educational Resources Information Center

Sari, Ihsan

2015-01-01

In recent years, goal orientations have been examined in their relationship with other potential determinants of athletic performance. The relevant research showed that task orientation, compared to ego orientation, is linked to more adaptive outcomes (Behzadi, Hamzei, Nori and Salehian, 2011; Duda and Whitehead, 1998; Roberts, 2001; Biddle, 2001;…

The dampening effect of employees’ future orientation on cyberloafing behaviors: the mediating role of self-control

PubMed Central

Zhang, Heyun; Zhao, Huanhuan; Liu, Jingxuan; Xu, Yan; Lu, Hui

2015-01-01

Previous studies on reducing employees’ cyberloafing behaviors have primarily examined the external control factors but seldomly taken individual internal subjective factors into consideration. Future orientation, an important individual factor, is defined as the extent to which one plans for future time and considers future consequences of one’s current behavior. To explore further whether and how employees’ future orientation can dampen their cyberloafing behaviors, two studies were conducted to examine the relationship between employees’ future orientation and cyberloafing behaviors. The mediation effect of employees’ objective and subjective self-control between them was also examined. In Study 1, a set of questionnaires was completed, and the results revealed that the relationship between employees’ future orientation and cyberloafing behaviors was negative, and objective self-control mediated the relationship. Next, we conducted a priming experiment (Study 2) to examine the causal relationship and psychological mechanism between employees’ future orientation and cyberloafing behaviors. The results demonstrated that employees’ future-orientation dampened their attitudes and intentions to engage in cyberloafing, and subjective self-control mediated this dampening effect. Theoretical and practical implications of these findings are also discussed. PMID:26483735

Quantum-confinement effects on conduction band structure of rectangular cross-sectional GaAs nanowires

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanaka, H., E-mail: tanaka@semicon.kuee.kyoto-u.ac.jp; Morioka, N.; Mori, S.

2014-02-07

The conduction band structure and electron effective mass of GaAs nanowires with various cross-sectional shapes and orientations were calculated by two methods, a tight-binding method and an effective mass equation taking the bulk full-band structure into account. The effective mass of nanowires increases as the cross-sectional size decreases, and this increase in effective mass depends on the orientations and substrate faces of nanowires. Among [001], [110], and [111]-oriented rectangular cross-sectional GaAs nanowires, [110]-oriented nanowires with wider width along the [001] direction showed the lightest effective mass. This dependence originates from the anisotropy of the Γ valley of bulk GaAs. Themore » relationship between effective mass and bulk band structure is discussed.« less

Strategic relatedness in mergers and financial performance: the case of the health maintenance organization industry in the United States.

PubMed

Weech-Maldonado, Robert

2002-11-01

Knowledge and identification of strategic factors associated with favourable post-acquisition performance can be of benefit to both managers and shareholders. From a management perspective, the identification of contextual factors that can influence postmerger performance is 'strategic' in nature, and should be considered in the analysis of future acquisitions. Within the context of the health maintenance organization (HMO) industry, this study examines the impact of strategic relatedness on postmerger financial performance. Strategic relatedness is conceptualized as similarity between the acquirer and target HMOs in terms of operational efficiency, marketing orientation, organizational structure and profit orientation. Regression analysis showed that similarity in operational efficiency and similarity in HMO structure were associated with better postmerger financial performance. However, marketing orientation similarity and profit orientation similarity were not significantly related to postmerger performance. This finding suggests that HMO mergers involving firms with similar strategic orientations and similar approaches to the delivery of care have greater strategic fit and experience better financial performance.

The relationships among social capital, organisational commitment and customer-oriented prosocial behaviour of hospital nurses.

PubMed

Hsu, Chiu-Ping; Chang, Chia-Wen; Huang, Heng-Chiang; Chiang, Chi-Yun

2011-05-01

This study examines the perceptions of registered nurses of social capital, organisational commitment and customer-oriented prosocial behaviour. Additionally, this study also addresses a conceptual model for testing how registered nurses' perceptions of three types of social capital influence their organisational commitment, in turn intensifying customer-oriented prosocial behaviour, including role-prescribed customer service and extra-role customer service. Customer-oriented prosocial behaviour explains differences in job satisfaction and job performance. However, the critical role of customer orientation in the hospital setting has yet to be explored. Survey. The survey was conducted to obtain data from registered nurses working for a large Taiwanese medical centre, yielding 797 usable responses and a satisfactory response rate of 86.7%. The partial least squares method was adopted to obtain parameter estimates and test proposed hypotheses. The study measurements display satisfactory reliability, as well as both convergent and discriminant validities. All hypotheses were supported. Empirical results indicate that registered nurses' perceptions of social capital were significantly impacted the extent of organisational commitment, which in turn significantly influenced customer-oriented prosocial behaviour. By stimulating nursing staff commitment, health care providers can urge them to pursue organisational goals and provide high quality customer service. To enhance organisational commitment, health care managers should endeavour to create interpersonal interaction platforms in addition to simply offering material rewards. Nurses act as contact employees for their patient customers in the hospital, and they are required to provide patient safety and service quality. This study shows that nurses with high organisational commitment are willing to provide customer-oriented prosocial activities, which in turn enhances patient satisfaction. © 2011 Blackwell Publishing Ltd.

Thermal Model Correlation for Mars Reconnaissance Orbiter

NASA Technical Reports Server (NTRS)

Amundsen, Ruth M.; Dec, John A.; Gasbarre, Joseph F.

2007-01-01

The Mars Reconnaissance Orbiter (MRO) launched on August 12, 2005 and began aerobraking at Mars in March 2006. In order to save propellant, MRO used aerobraking to modify the initial orbit at Mars. The spacecraft passed through the atmosphere briefly on each orbit; during each pass the spacecraft was slowed by atmospheric drag, thus lowering the orbit apoapsis. The largest area on the spacecraft, most affected by aeroheating, was the solar arrays. A thermal analysis of the solar arrays was conducted at NASA Langley Research Center to simulate their performance throughout the entire roughly 6-month period of aerobraking. A companion paper describes the development of this thermal model. This model has been correlated against many sets of flight data. Several maneuvers were performed during the cruise to Mars, such as thruster calibrations, which involve large abrupt changes in the spacecraft orientation relative to the sun. The data obtained from these maneuvers allowed the model to be well-correlated with regard to thermal mass, conductive connections, and solar response well before arrival at the planet. Correlation against flight data for both in-cruise maneuvers and drag passes was performed. Adjustments made to the model included orientation during the drag pass, solar flux, Martian surface temperature, through-array resistance, aeroheating gradient due to angle of attack, and aeroheating accommodation coefficient. Methods of correlation included comparing the model to flight temperatures, slopes, temperature deltas between sensors, and solar and planet direction vectors. Correlation and model accuracy over 400 aeroheating drag passes were determined, with overall model accuracy better than 5 C.

Benefit from the Chin-Down Maneuver in the Swallowing Performance and Self-Perception of Parkinson's Disease Patients

PubMed Central

Jotz, Geraldo Pereira

2017-01-01

Aims. To verify the effectiveness of the maneuver application in swallowing therapy with PD. Materials and Method. We performed an open-label trial, with three groups compounds by PD individuals: the experimental group, control group, and orientation group. The study included PD patients with dysphagia. A cognitive screening, through a questionnaire about depression and quality of life, was conducted. Swallowing assessment was performed through (1) fiberoptic endoscopic evaluation of swallowing (FEES); (2) clinical evaluation and Functional Oral Intake Scale (FOIS); and (3) assessment of the quality life related to swallowing (SWALQOL). A therapeutic program, which consisted of chin-down postural maneuver and orientations on feeding, was applied. Both groups (EG and OG) received on-month therapeutic program. Results. A significant improvement in swallowing, evaluated by clinical assessment, was observed in solid (p < 0.001) and liquid (p = 0.022) consistencies in EG when compared to OG and CG. Patients in EG presented improvement in QoL, with the significant difference in comparison with the other groups, about domain frequency of symptoms (p = 0.029) in SWALQOL questionnaire. Conclusion. The postural maneuver chin-down improved swallowing performance and self-perception, but not the laryngeal signs. This trial is registered with registration number NCT02973698. PMID:28203475

Performance-oriented mobility assessment (POMA) balance score indicates need for assistive device.

PubMed

Mitchell, Kathryn D; Newton, Roberta A

2006-06-01

To determine (1) if older adults using an assistive device (AD) score lower on the Performance-Oriented Mobility Assessment (POMA) balance subscale (B-subscale) than individuals not using an AD; and (2) if a cut-score of 12 would indicate the need to use an AD. Elderly persons (n = 82, mean age = 82.1 years) were surveyed about AD use, health status, activity level and fall history. A one-time assessment of balance was conducted using the B-subscale. The 'arising task' was repeated to evaluate performance on the sit-to-stand task without using hands. A significant difference in B-subscale scores was observed between the two groups (AD; no AD), (P < 0.001). AD use was associated with lower activity level and health status. A cut-score of 12 points indicated device use (P = 0.000). The repeated 'arising task' demonstrated that 76.8% performed the task without using hands for support. Older adults using an AD will score lower on the B-subscale and report lower activity level and health status. A score of less than 12 on the B-subscale is indicative of AD need. Older adults who use an AD and self-report a falls history will score lower on the B-subscale than individuals using an AD and no reported history of falls.

Characterization of individual straight and kinked boron carbide nanowires

NASA Astrophysics Data System (ADS)

Cui, Zhiguang

Boron carbides represent a class of ceramic materials with p-type semiconductor natures, complex structures and a wide homogeneous range of carbon compositions. Bulk boron carbides have long been projected as promising high temperature thermoelectric materials, but with limited performance. Bringing the bulk boron carbides to low dimensions (e.g., nanowires) is believed to be an option to enhance their thermoelectric performance because of the quantum size effects. However, the fundamental studies on the microstructure-thermal property relation of boron carbide nanowires are elusive. In this dissertation work, systematic structural characterization and thermal conductivity measurement of individual straight and kinked boron carbide nanowires were carried out to establish the true structure-thermal transport relation. In addition, a preliminary Raman spectroscopy study on identifying the defects in individual boron carbide nanowires was conducted. After the synthesis of single crystalline boron carbide nanowires, straight nanowires accompanied by the kinked ones were observed. Detailed structures of straight boron carbide nanowires have been reported, but not the kinked ones. After carefully examining tens of kinked nanowires utilizing Transmission Electron Microscopy (TEM), it was found that they could be categorized into five cases depending on the stacking faults orientations in the two arms of the kink: TF-TF, AF-TF, AF-AF, TF-IF and AF-IF kinks, in which TF, AF and IF denotes transverse faults (preferred growth direction perpendicular to the stacking fault planes), axial faults (preferred growth direction in parallel with the stacking fault planes) and inclined faults (preferred growth direction neither perpendicular to nor in parallel with the stacking fault planes). Simple structure models describing the characteristics of TF-TF, AF-TF, AF-AF kinked nanowires are constructed in SolidWorks, which help to differentiate the kinked nanowires viewed from the zone axes where stacking faults are invisible. In collaboration with the experts in the field of thermal property characterization of one dimensional nanostructures, thermal conductivities of over 60 nanowires including both straight and kinked ones have been measured in the temperature range of 20 - 420 K and the parameters (i.e., carbon contents, diameters, stacking faults densities/orientations and kinks) affecting the phonon transport were explored. The results disclose strong carbon content and diameter dependence of thermal conductivities of boron carbide nanowires, which decreases as lowering the carbon content and diameter. Stacking fault orientations do modulate the phonon transport (kappaTF < kappa AF), while stacking fault densities seems to only have obvious effects on phonon transport when meeting certain threshold ( 39%). The most interesting discovery is significant reduction of thermal conductivity (15% - 40%) in kinked boron carbide nanowires due to phonon mode conversions and scattering at the kink site. Last but not least, micro-Raman spectroscopy study on individual boron carbide nanowires has been performed for the first time, to the best of our knowledge. Based on the preliminary data, it is found that the stacking fault orientations have no apparent effect on the Raman scattering, but the stacking fault densities do. In addition, up as the size going down to nanoscale, some Raman modes are inactive while some new ones show up, which is largely ascribed to the quantum confinement effects. One more important finding is that the carbon content also plays important role in the Raman scattering of boron carbide nanowires in the low frequency region (< 600 cm-1), which mainly comes from the 3-atom chains (C-B-C or C-B-B).

Within-Group Differences in Sexual Orientation and Identity

ERIC Educational Resources Information Center

Worthington, Roger L.; Reynolds, Amy L.

2009-01-01

The purpose of this investigation was to examine within-group differences among self-identified sexual orientation and identity groups. To understand these within-group differences, 2 types of analysis were conducted. First, a sample of 2,732 participants completed the Sexual Orientation and Identity Scale. Cluster analyses were used to identify 3…

46 CFR 28.270 - Instruction, drills, and safety orientation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Instruction, drills, and safety orientation. 28.270... Trade § 28.270 Instruction, drills, and safety orientation. (a) Drills and instruction. The master or individual in charge of each vessel must ensure that drills are conducted and instruction is given to each...

46 CFR 28.270 - Instruction, drills, and safety orientation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Instruction, drills, and safety orientation. 28.270... Trade § 28.270 Instruction, drills, and safety orientation. (a) Drills and instruction. The master or individual in charge of each vessel must ensure that drills are conducted and instruction is given to each...

46 CFR 28.270 - Instruction, drills, and safety orientation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Instruction, drills, and safety orientation. 28.270... Trade § 28.270 Instruction, drills, and safety orientation. (a) Drills and instruction. The master or individual in charge of each vessel must ensure that drills are conducted and instruction is given to each...

The Relation between Prospective Teachers' Goal Orientations and Academic E-Dishonesty

ERIC Educational Resources Information Center

Sicak, Ali; Arslan, Ali

2016-01-01

The purpose of this study is to investigate the relation between prospective teachers' goal orientations and academic e-dishonesty behaviors, and also the effects of their goal orientations on academic e-dishonesty behaviors. This research was conducted with correlational method. Participants of the study were 669 prospective teachers attending at…

78 FR 64471 - Black Hills National Forest Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

... following business will be conducted: (1) Orientation to Forest Funding including appropriations and trends... provide an orientation to the Board regarding Forest Funding, including appropriations and trends; (2...

Assessing wildlife value orientations in China: an exploration of the concepts and methodology

Treesearch

Sharon Xiangyou Shen; Harry Zinn; Alex Yasong Wang

2007-01-01

The wildlife value orientation (WVO) construct has been used to describe deeply-held beliefs about how humans should relate to wildlife. As part of a larger effort to test the usefulness of the WVO construct across cultures, we conducted pilot testing of the construct in China. Sixteen mixed-method interviews were conducted in five cities/towns in China. Participants...

An Examination of Mastery- and Performance-Based Orientations in Strategic Communication Syllabi and Suggestions for Rhetorical and Pedagogical Improvement

ERIC Educational Resources Information Center

Stevens, Elise M.; Gibson, Rhonda

2017-01-01

This study evaluated syllabi (N = 87) from introductory advertising and public relations courses to examine to what extent and how stated course goals and assignments signal the overall learning orientation of a course and which type of learning orientation--mastery or performance--was most common. Mastery orientations emphasize intrinsic rewards,…

Recovery of Bennu's orientation for the OSIRIS-REx mission: implications for the spin state accuracy and geolocation errors

NASA Astrophysics Data System (ADS)

Mazarico, Erwan; Rowlands, David D.; Sabaka, Terence J.; Getzandanner, Kenneth M.; Rubincam, David P.; Nicholas, Joseph B.; Moreau, Michael C.

2017-10-01

The goal of the OSIRIS-REx mission is to return a sample of asteroid material from near-Earth asteroid (101955) Bennu. The role of the navigation and flight dynamics team is critical for the spacecraft to execute a precisely planned sampling maneuver over a specifically selected landing site. In particular, the orientation of Bennu needs to be recovered with good accuracy during orbital operations to contribute as small an error as possible to the landing error budget. Although Bennu is well characterized from Earth-based radar observations, its orientation dynamics are not sufficiently known to exclude the presence of a small wobble. To better understand this contingency and evaluate how well the orientation can be recovered in the presence of a large 1° wobble, we conduct a comprehensive simulation with the NASA GSFC GEODYN orbit determination and geodetic parameter estimation software. We describe the dynamic orientation modeling implemented in GEODYN in support of OSIRIS-REx operations and show how both altimetry and imagery data can be used as either undifferenced (landmark, direct altimetry) or differenced (image crossover, altimetry crossover) measurements. We find that these two different types of data contribute differently to the recovery of instrument pointing or planetary orientation. When upweighted, the absolute measurements help reduce the geolocation errors, despite poorer astrometric (inertial) performance. We find that with no wobble present, all the geolocation requirements are met. While the presence of a large wobble is detrimental, the recovery is still reliable thanks to the combined use of altimetry and imagery data.

Temporal dissociation between the focal and orientation components of spatial attention in central and peripheral vision.

PubMed

Albonico, Andrea; Malaspina, Manuela; Bricolo, Emanuela; Martelli, Marialuisa; Daini, Roberta

2016-11-01

Selective attention, i.e. the ability to concentrate one's limited processing resources on one aspect of the environment, is a multifaceted concept that includes different processes like spatial attention and its subcomponents of orienting and focusing. Several studies, indeed, have shown that visual tasks performance is positively influenced not only by attracting attention to the target location (orientation component), but also by the adjustment of the size of the attentional window according to task demands (focal component). Nevertheless, the relative weight of the two components in central and peripheral vision has never been studied. We conducted two experiments to explore whether different components of spatial attention have different effects in central and peripheral vision. In order to do so, participants underwent either a detection (Experiment 1) or a discrimination (Experiment 2) task where different types of cues elicited different components of spatial attention: a red dot, a small square and a big square (an optimal stimulus for the orientation component, an optimal and a sub-optimal stimulus for the focal component respectively). Response times and cue-size effects indicated a stronger effect of the small square or of the dot in different conditions, suggesting the existence of a dissociation in terms of mechanisms between the focal and the orientation components of spatial attention. Specifically, we found that the orientation component was stronger in periphery, while the focal component was noticeable only in central vision and characterized by an exogenous nature. Copyright © 2016 Elsevier B.V. All rights reserved.

Management team learning orientation and business unit performance.

PubMed

Bunderson, J Stuart; Sutcliffe, Kathleen M

2003-06-01

Although research has suggested that teams can differ in the extent to which they encourage proactive learning and competence development among their members (a team learning orientation), the performance consequences of these differences are not well understood. Drawing from research on goal orientation and team learning, this article suggests that, although a team learning orientation can encourage adaptive behaviors that lead to improved performance, it is also possible for teams to compromise performance in the near term by overemphasizing learning, particularly when they have been performing well. A test of this proposition in a sample of business unit management teams provides strong support. The results confirm that an appropriate emphasis on learning can have positive consequences for team effectiveness.

The association between reading abilities and visual-spatial attention in Hong Kong Chinese children.

PubMed

Liu, Sisi; Liu, Duo; Pan, Zhihui; Xu, Zhengye

2018-03-25

A growing body of research suggests that visual-spatial attention is important for reading achievement. However, few studies have been conducted in non-alphabetic orthographies. This study extended the current research to reading development in Chinese, a logographic writing system known for its visual complexity. Eighty Hong Kong Chinese children were selected and divided into poor reader and typical reader groups, based on their performance on the measures of reading fluency, Chinese character reading, and reading comprehension. The poor and typical readers were matched on age and nonverbal intelligence. A Posner's spatial cueing task was adopted to measure the exogenous and endogenous orienting of visual-spatial attention. Although the typical readers showed the cueing effect in the central cue condition (i.e., responses to targets following valid cues were faster than those to targets following invalid cues), the poor readers did not respond differently in valid and invalid conditions, suggesting an impairment of the endogenous orienting of attention. The two groups, however, showed a similar cueing effect in the peripheral cue condition, indicating intact exogenous orienting in the poor readers. These findings generally supported a link between the orienting of covert attention and Chinese reading, providing evidence for the attentional-deficit theory of dyslexia. Copyright © 2018 John Wiley & Sons, Ltd.

Use of LS-DYNA(Registered TradeMark) to Assess the Energy Absorption Performance of a Shell-Based Kevlar(TradeMark)/Epoxy Composite Honeycomb

NASA Technical Reports Server (NTRS)

Polanco, Michael

2010-01-01

The forward and vertical impact stability of a composite honeycomb Deployable Energy Absorber (DEA) was evaluated during a full-scale crash test of an MD-500 helicopter at NASA Langley?s Landing and Impact Research Facility. The lower skin of the helicopter was retrofitted with DEA components to protect the airframe subfloor upon impact and to mitigate loads transmitted to Anthropomorphic Test Device (ATD) occupants. To facilitate the design of the DEA for this test, an analytical study was conducted using LS-DYNA(Registered TradeMark) to evaluate the performance of a shell-based DEA incorporating different angular cell orientations as well as simultaneous vertical and forward impact conditions. By conducting this study, guidance was provided in obtaining an optimum design for the DEA that would dissipate the kinetic energy of the airframe while maintaining forward and vertical impact stability.

Stress and performance: do service orientation and emotional energy moderate the relationship?

PubMed

Smith, Michael R; Rasmussen, Jennifer L; Mills, Maura J; Wefald, Andrew J; Downey, Ronald G

2012-01-01

The current study examines the moderating effect of customer service orientation and emotional energy on the stress-performance relationship for 681 U.S. casual dining restaurant employees. Customer service orientation was hypothesized to moderate the stress-performance relationship for Front-of-House (FOH) workers. Emotional energy was hypothesized to moderate stress-performance for Back-of-House (BOH) workers. Contrary to expectations, customer service orientation failed to moderate the effects of stress on performance for FOH employees, but the results supported that customer service orientation is likely a mediator of the relationship. However, the hypothesis was supported for BOH workers; emotional energy was found to moderate stress performance for these employees. This finding suggests that during times of high stress, meaningful, warm, and empathetic relationships are likely to impact BOH workers' ability to maintain performance. These findings have real-world implications in organizational practice, including highlighting the importance of developing positive and meaningful social interactions among workers and facilitating appropriate person-job fits. Doing so is likely to help in alleviating worker stress and is also likely to encourage worker performance.

Advanced and innovative wind energy concept development: Dynamic inducer system, executive summary

NASA Astrophysics Data System (ADS)

Lissaman, P. B. S.; Zalay, A. D.; Hibbs, B. H.

1981-05-01

Concepts to improve the technical and economic performance of wind energy conversion systems (WECS) were examined. One technique for improving the cost-effectiveness of WECS is the use of tip vanes. Tip vanes are small airfoils attached approximately at right angles to the rotor tips with their span oriented approximately parallel to the local freestream. The performance benefits of the dynamic inducer tip vane system were demonstrated Tow-tests conducted on a three-bladed, 3.6-meter diameter rotor show that a dynamic inducer can achieve a power coefficient of 0.5, which exceeds that of a plain rotor by about 35%.

Analysis of the ceramic layer microstructure influence on plasma spray thermal barrier coating performance

NASA Astrophysics Data System (ADS)

Bogdanovich, V. I.; Giorbelidze, M. G.

2017-12-01

This paper outlines the results of analysis and describes the structure of the thermal protection coatings formed by atomic ion stream deposition in vacuum, and plasma thermal spraying method. Crystallite structure features are considered along with the crystallite dimensions, spatial orientation, and position of the boundaries between separate crystallites. Discontinuity, volume, and morphology of the pores has been evaluated. Experimental studies have been accomplished using various fractions of the powder-like material ZrO2 - 8%Y2O3. The influence of the coating microstructure on the coating performance has been analyzed, such as adhesive strength, thermal stability, and thermal conductivity.

For the love of learning science: Connecting learning orientation and career productivity in physics and chemistry

NASA Astrophysics Data System (ADS)

Hazari, Zahra; Potvin, Geoff; Tai, Robert H.; Almarode, John

2010-06-01

An individual’s motivational orientation serves as a drive to action and can influence their career success. This study examines how goal orientation toward the pursuit of a graduate degree in physics and chemistry influences later success outcomes of practicing physicists and chemists. Two main categories of goal orientation are examined in this paper: performance orientation or motivation to demonstrate one’s ability or performance to others, and learning orientation or motivation through the desire to learn about a topic. The data were obtained as part of Project Crossover, a mixed-methods study which focused on studying the transition from graduate student to scientist in the physical sciences and included a survey of members of two national professional physical science organizations. Using regression analysis on data from 2353 physicists and chemists, results indicate that physicists and chemists who reported a learning orientation as their motivation for going to graduate school were more productive, in terms of total career primary and/or first-author publications and grant funding, than those reporting a performance orientation. Furthermore, given equal salary, learning-oriented individuals produced more primary and/or first-author publications than their nonlearning oriented counterparts.

Pre-simulation orientation for medical trainees: An approach to decrease anxiety and improve confidence and performance.

PubMed

Bommer, Cassidy; Sullivan, Sarah; Campbell, Krystle; Ahola, Zachary; Agarwal, Suresh; O'Rourke, Ann; Jung, Hee Soo; Gibson, Angela; Leverson, Glen; Liepert, Amy E

2018-02-01

We assessed the effect of basic orientation to the simulation environment on anxiety, confidence, and clinical decision making. Twenty-four graduating medical students participated in a two-week surgery preparatory curriculum, including three simulations. Baseline anxiety was assessed pre-course. Scenarios were completed on day 2 and day 9. Prior to the first simulation, participants were randomly divided into two groups. Only one group received a pre-simulation orientation. Before the second simulation, all students received the same orientation. Learner anxiety was reported immediately preceding and following each simulation. Confidence was assessed post-simulation. Performance was evaluated by surgical faculty. The oriented group experienced decreased anxiety following the first simulation (p = 0.003); the control group did not. Compared to the control group, the oriented group reported less anxiety and greater confidence and received higher performance scores following all three simulations (all p < 0.05). Pre-simulation orientation reduces anxiety while increasing confidence and improving performance. Copyright © 2017 Elsevier Inc. All rights reserved.

Implicit, nonswitching, vector-oriented algorithm for steady transonic flow

NASA Technical Reports Server (NTRS)

Lottati, I.

1983-01-01

A rapid computation of a sequence of transonic flow solutions has to be performed in many areas of aerodynamic technology. The employment of low-cost vector array processors makes the conduction of such calculations economically feasible. However, for a full utilization of the new hardware, the developed algorithms must take advantage of the special characteristics of the vector array processor. The present investigation has the objective to develop an efficient algorithm for solving transonic flow problems governed by mixed partial differential equations on an array processor.

Orienting Arc Lamps for Longest Life

NASA Technical Reports Server (NTRS)

Kiss, J.

1985-01-01

Temperature distribution strongly affects performance. Tests on floodlights for Space Shuttle payload bay show useful life of metal halide dc arc lamp prolonged by mounting "anode down" and wiring for maximum heat conduction away from electrodes. Anode-down configuration, anode and cathode temperatures stabilize at 333 degrees and 313 degrees C, respectively, after 1 hour of operation. Temperatures both below limit for quartz-to-metal seals, and lamps able to withstand a 2,000-hour life test with satisfactory light output at end.

Building clinicians-researchers partnerships: lessons from diverse natural settings and practice-oriented initiatives.

PubMed

Castonguay, Louis G; Youn, Soo Jeong; Xiao, Henry; Muran, J Christopher; Barber, Jacques P

2015-01-01

In this concluding paper, we identify the type of studies conducted by 11 teams of contributors to a special issue on building clinicians-researchers partnerships. Those studies were conducted across a variety of clinical settings. We also integrate the lessons that have emerged from their collaborative initiatives in terms of obstacles faced, strategies adopted to address these challenges, benefits gained, and general recommendations offered to facilitate studies conducted with or by clinicians. The paper ends with the authors' thoughts about the future success of practice-oriented research in general.

Better understanding work unit goal orientation: Its emergence and impact under different types of work unit structure.

PubMed

Dragoni, Lisa; Kuenzi, Maribeth

2012-09-01

With a multisource sample comprising 1,150 employees and 230 supervisors, we investigate the effect of leader goal orientation on leader's perceptions of unit performance. We propose that a leader's goal orientation indirectly impacts performance perceptions via the shared achievement goal adopted within the unit (i.e., unit goal orientation). Further, we hypothesize that the presence and impact of unit goal orientation depend on the work unit structure. We find general support for this moderated mediation model, with the strongest evidence being associated with the learning and prove dimensions of goal orientation.

Human Resource Orientation and Corporate Performance.

ERIC Educational Resources Information Center

Lam, Long W.; White, Louis P.

1998-01-01

A study of 14 manufacturing firms found significantly better financial performance among those that strongly emphasized recruitment, compensation, and training and development (a human resource orientation). Human resource development that helped sustain competence combined with that orientation to form a valuable competitive advantage. (SK)

[Perceptions of classroom goal structures, personal achievement goal orientations, and learning strategies].

PubMed

Miki, Kaori; Yamauchi, Hirotsugu

2005-08-01

We examined the relations among students' perceptions of classroom goal structures (mastery and performance goal structures), students' achievement goal orientations (mastery, performance, and work-avoidance goals), and learning strategies (deep processing, surface processing and self-handicapping strategies). Participants were 323 5th and 6th grade students in elementary schools. The results from structural equation modeling indicated that perceptions of classroom mastery goal structures were associated with students' mastery goal orientations, which were in turn related positively to the deep processing strategies and academic achievement. Perceptions of classroom performance goal stractures proved associated with work avoidance-goal orientations, which were positively related to the surface processing and self-handicapping strategies. Two types of goal structures had a positive relation with students' performance goal orientations, which had significant positive effects on academic achievement. The results of this study suggest that elementary school students' perceptions of mastery goal structures are related to adaptive patterns of learning more than perceptions of performance goal structures are. The role of perceptions of classroom goal structure in promoting students' goal orientations and learning strategies is discussed.

Seedlayer and underlayer effects on the crystallographic orientation and magnetic recording performance of glass media

NASA Astrophysics Data System (ADS)

Zheng, Min; Choe, Geon; Johnson, Kenneth E.

2002-05-01

Seedlayer and underlayer effects on crystallographic orientation and recording performance were studied for CoCrPtB media sputtered on glass substrates. For this study, the seedlayers are XAl (X=Ni, Co, Ti, and Ru) and the underlayers are CrY (Y=V, Mo, W, and Ti). It was found that not only different seedlayers, but also different combinations of seedlayer and underlayer, led to different magnetic performance. NiAl and CoAl seedlayers orient the Co c axis to (10.0) and TiAl and RuAl seedlayers produce (11.0) Co orientation. For the NiAl and CoAl seedlayer, CrV and CrW underlayers develop less out-of-plane c-axis orientation and higher coercivity and coercive squareness while CrTi and CrMo underlayers work better for TiAl and RuAl seedlayers, respectively. Media with RuAl seedlayers have better parametric performance than media with NiAl and CoAl seedlayers. The detailed relationship between seedlayer and underlayer types and crystal orientation and recording performance is discussed.

Competitive region orientation code for palmprint verification and identification

NASA Astrophysics Data System (ADS)

Tang, Wenliang

2015-11-01

Orientation features of the palmprint have been widely investigated in coding-based palmprint-recognition methods. Conventional orientation-based coding methods usually used discrete filters to extract the orientation feature of palmprint. However, in real operations, the orientations of the filter usually are not consistent with the lines of the palmprint. We thus propose a competitive region orientation-based coding method. Furthermore, an effective weighted balance scheme is proposed to improve the accuracy of the extracted region orientation. Compared with conventional methods, the region orientation of the palmprint extracted using the proposed method can precisely and robustly describe the orientation feature of the palmprint. Extensive experiments on the baseline PolyU and multispectral palmprint databases are performed and the results show that the proposed method achieves a promising performance in comparison to conventional state-of-the-art orientation-based coding methods in both palmprint verification and identification.

Perceptual-cognitive skills and performance in orienteering.

PubMed

Guzmán, José F; Pablos, Ana M; Pablos, Carlos

2008-08-01

The goal was analysis of the perceptual-cognitive skills associated with sport performance in orienteering in a sample of 22 elite and 17 nonelite runners. Variables considered were memory, basic orienteering techniques, map reading, symbol knowledge, map-terrain-map identification, and spatial organisation. A computerised questionnaire was developed to measure the variables. The reliability of the test (agreement between experts) was 90%. Findings suggested that competence in performing basic orienteering techniques efficiently was a key variable differentiating between the elite and the nonelite athletes. The results are discussed in comparison with previous studies.

A study on aircraft map display location and orientation. [effects of map display location on manual piloting performance

NASA Technical Reports Server (NTRS)

Baty, D. L.; Wempe, T. E.; Huff, E. M.

1973-01-01

Six airline pilots participated in a fixed-base simulator study to determine the effects of two Horizontal Situation Display (HSD/map) panel locations relative to the Vertical Situation Display (VSD), and of three map orientations on manual piloting performance. Pilot comments and opinions were formally obtained. Significant performance differences were found between wind conditions, and among pilots, but not between map locations and orientations. The results also illustrate the potential tracking accuracy of such a display. Recommendations concerning display location and map orientation are made.

Sources of Variability in Performance Times at the World Orienteering Championships.

PubMed

Hébert-Losier, Kim; Platt, Simon; Hopkins, William G

2015-07-01

An improvement equal to 0.3 of the typical variation in an elite athlete's race-to-race performance estimates the smallest worthwhile enhancement, which has not yet been determined for orienteers. Moreover, much of the research in high-performance orienteering has focused on physical and cognitive aspects, although course characteristics might influence race performance. Analysis of race data provides insights into environmental effects and other aspects of competitive performance. Our aim was to examine such factors in relation to World Orienteering Championships performances. We used mixed linear modelling to analyze finishing times from the three qualification rounds and final round of the sprint, middle-distance, and long-distance disciplines of World Orienteering Championships from 2006 to 2013. Models accounted for race length, distance climbed, number of controls, home advantage, venue identity, round (qualification final), athlete identity, and athlete age. Within-athlete variability (coefficient of variation, mean ± SD) was lower in the final (4.9% ± 1.4%) than in the qualification (7.3% ± 2.4%) rounds and provided estimates of smallest worthwhile enhancements of 1.0%-3.5%. The home advantage was clear in most disciplines, with distance climbed particularly impacting sprint performances. Small to very large between-venue differences were apparent. Performance predictability expressed as intraclass correlation coefficients was extremely high within years and was high to very high between years. Age of peak performance ranged from 27 to 31 yr. Our results suggest that elite orienteers should focus on training and strategies that enhance performance by at least 1.0%-3.5% for smallest worthwhile enhancement. Moreover, as greater familiarity with the terrain likely mediated the home advantage, foreign athletes would benefit from training in nations hosting the World Orienteering Championships for familiarization.

Optical orientation of electrons in compensated semiconductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kokurin, I. A., E-mail: kokorinia@math.mrsu.ru; Petrov, P. V.; Averkiev, N. S.

2013-09-15

The theory of the optical orientation of charge carriers in compensated III-V semiconductors and quantum wells for the case where electrons are excited to the conduction band from Mn-charged acceptor states is presented. It is shown that, in GaAs/AlGaAs quantum wells, the degree of the spin orientation of conduction-band electrons in this excitation scheme can be as high as 85%. This spin-orientation enhancement results from an increase in the heavy-hole contribution to the acceptor state in the vicinity of the defect center rather than from level splitting caused by quantum confinement. It is shown that the degree of circular polarizationmore » of the photoluminescence emitted upon the recombination of electrons thermalized at the bottom of the band with holes occupying the acceptor ground state in a quantum well can exceed 70%.« less

Theory of electrical conductivity and dielectric permittivity of highly aligned graphene-based nanocomposites.

PubMed

Xia, Xiaodong; Hao, Jia; Wang, Yang; Zhong, Zheng; Weng, George J

2017-05-24

Highly aligned graphene-based nanocomposites are of great interest due to their excellent electrical properties along the aligned direction. Graphene fillers in these composites are not necessarily perfectly aligned, but their orientations are highly confined to a certain angle, [Formula: see text] with 90° giving rise to the randomly oriented state and 0° to the perfectly aligned one. Recent experiments have shown that electrical conductivity and dielectric permittivity of highly aligned graphene-polymer nanocomposites are strongly dependent on this distribution angle, but at present no theory seems to exist to address this issue. In this work we present a new effective-medium theory that is derived from the underlying physical process including the effects of graphene orientation, filler loading, aspect ratio, percolation threshold, interfacial tunneling, and Maxwell-Wagner-Sillars polarization, to determine these two properties. The theory is formulated in the context of preferred orientational average. We highlight this new theory with an application to rGO/epoxy nanocomposites, and demonstrate that the calculated in-plane and out-of-plane conductivity and permittivity are in agreement with the experimental data as the range of graphene orientations changes from the randomly oriented to the highly aligned state. We also show that the percolation thresholds of highly aligned graphene nanocomposites are in general different along the planar and the normal directions, but they converge into a single one when the statistical distribution of graphene fillers is spherically symmetric.

Developing Competence: A Qualitative Inquiry of College Student Leadership in University Outdoor Orientation Programs

ERIC Educational Resources Information Center

Starbuck, J. David.

2013-01-01

Forty-nine formal research studies have been conducted on participants of college outdoor orientation programs. Although many variables have been examined for the incoming students, only one study has focused on the impact on the student leaders. The goal of this study was to understand how student leaders in outdoor orientation programs…

Black Voices and Format Regulations: A Study in Black-Oriented Radio.

ERIC Educational Resources Information Center

Meyer, Anthony J.

Based on a study of black-oriented broadcasting conducted in 1970, the purpose of this report is to discern and elucidate, rather than measure conclusively, the dynamics of its "success," emphasizing the potential of such stations to have a positive social impact on their communities. Fourteen black-oriented stations were visited, 30 license…

Thermally induced chain orientation for improved thermal conductivity of P(VDF-TrFE) thin films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Junnan; Tan, Aaron C.; Green, Peter F.

2017-01-01

A large increase in thermal conductivityκwas observed in a P(VDF-TrFE) thin film annealed above melting temperature due to extensive ordering of polymer backbone chains perpendicular to the substrate after recrystallization from the melt. This finding may lay out a straightforward method to improve the thin filmκof semicrystalline polymers whose chain orientation is sensitive to thermal annealing.

Tensile and shear methods for measuring strength of bilayer tablets.

PubMed

Chang, Shao-Yu; Li, Jian-Xin; Sun, Changquan Calvin

2017-05-15

Both shear and tensile measurement methods have been used to quantify interfacial bonding strength of bilayer tablets. The shear method is more convenient to perform, but reproducible strength data requires careful control of the placement of tablet and contact point for shear force application. Moreover, data obtained from the shear method depend on the orientation of the bilayer tablet. Although more time-consuming to perform, the tensile method yields data that are straightforward to interpret. Thus, the tensile method is preferred in fundamental bilayer tableting research to minimize ambiguity in data interpretation. Using both shear and tensile methods, we measured the mechanical strength of bilayer tablets made of several different layer combinations of lactose and microcrystalline cellulose. We observed a good correlation between strength obtained by the tensile method and carefully conducted shear method. This suggests that the shear method may be used for routine quality test of bilayer tablets during manufacturing because of its speed and convenience, provided a protocol for careful control of the placement of the tablet interface, tablet orientation, and blade is implemented. Copyright © 2017 Elsevier B.V. All rights reserved.

PET Mapping for Brain-Computer Interface Stimulation of the Ventroposterior Medial Nucleus of the Thalamus in Rats with Implanted Electrodes.

PubMed

Zhu, Yunqi; Xu, Kedi; Xu, Caiyun; Zhang, Jiacheng; Ji, Jianfeng; Zheng, Xiaoxiang; Zhang, Hong; Tian, Mei

2016-07-01

Brain-computer interface (BCI) technology has great potential for improving the quality of life for neurologic patients. This study aimed to use PET mapping for BCI-based stimulation in a rat model with electrodes implanted in the ventroposterior medial (VPM) nucleus of the thalamus. PET imaging studies were conducted before and after stimulation of the right VPM. Stimulation induced significant orienting performance. (18)F-FDG uptake increased significantly in the paraventricular thalamic nucleus, septohippocampal nucleus, olfactory bulb, left crus II of the ansiform lobule of the cerebellum, and bilaterally in the lateral septum, amygdala, piriform cortex, endopiriform nucleus, and insular cortex, but it decreased in the right secondary visual cortex, right simple lobule of the cerebellum, and bilaterally in the somatosensory cortex. This study demonstrated that PET mapping after VPM stimulation can identify specific brain regions associated with orienting performance. PET molecular imaging may be an important approach for BCI-based research and its clinical applications. © 2016 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

The effects of instructional sets on reactions to and performance on an intelligent tutoring system

NASA Technical Reports Server (NTRS)

Johnson, Debra Steele

1993-01-01

The effects of a contextual factor, i.e., task instructions, on performance on and reactions to an Intellegent Tutoring System (ITS) training Remote Manipulator System (RMS) tasks were examined. The results supported the first prediction that task instructions could be used to successfully induce a mastery versus an achievement orientation. Previous research suggests that a mastery orientation can result in beneficial effects on learning and performance of complex tasks. Furthermore, the results supported the second prediction that a mastery orientation would have beneficial effects on learning and performance as well as affective and cognitive reactions to the ITS tasks. Moreover, the results indicated that a mastery orientation was especially beneficial for the more complex ITS tasks and later in task practice, i.e., when a task was performed for the second time. A mastery orientation is posited to have its beneficial effects by focusing more effort and attention on task performance. Conclusions are drawn with some caution due to the small number of subjects, although the results for these subjects were consistent across multiple trials and multiple measures of performance. ITS designers are urged to consider contextual factors such as task instructions and feedback in terms of their potential to induce a mastery versus an achievement orientation.

Towards Principled Experimental Study of Autonomous Mobile Robots

NASA Technical Reports Server (NTRS)

Gat, Erann

1995-01-01

We review the current state of research in autonomous mobile robots and conclude that there is an inadequate basis for predicting the reliability and behavior of robots operating in unengineered environments. We present a new approach to the study of autonomous mobile robot performance based on formal statistical analysis of independently reproducible experiments conducted on real robots. Simulators serve as models rather than experimental surrogates. We demonstrate three new results: 1) Two commonly used performance metrics (time and distance) are not as well correlated as is often tacitly assumed. 2) The probability distributions of these performance metrics are exponential rather than normal, and 3) a modular, object-oriented simulation accurately predicts the behavior of the real robot in a statistically significant manner.

The Relationship Between Cosmopolitan-Local Orientation and Job Performance

ERIC Educational Resources Information Center

London, Manuel; And Others

1977-01-01

Relationships between cosmopolitan--local orientation and measures of job performance were examined for 150 technical employees in three architectural firms. Cosmopolitan orientation was positively related to supervisor ratings of following prescribed work hours and supervisor and co-worker ratings of impressing others. (Author)

Autonomous Quality Control of Joint Orientation Measured with Inertial Sensors.

PubMed

Lebel, Karina; Boissy, Patrick; Nguyen, Hung; Duval, Christian

2016-07-05

Clinical mobility assessment is traditionally performed in laboratories using complex and expensive equipment. The low accessibility to such equipment, combined with the emerging trend to assess mobility in a free-living environment, creates a need for body-worn sensors (e.g., inertial measurement units-IMUs) that are capable of measuring the complexity in motor performance using meaningful measurements, such as joint orientation. However, accuracy of joint orientation estimates using IMUs may be affected by environment, the joint tracked, type of motion performed and velocity. This study investigates a quality control (QC) process to assess the quality of orientation data based on features extracted from the raw inertial sensors' signals. Joint orientation (trunk, hip, knee, ankle) of twenty participants was acquired by an optical motion capture system and IMUs during a variety of tasks (sit, sit-to-stand transition, walking, turning) performed under varying conditions (speed, environment). An artificial neural network was used to classify good and bad sequences of joint orientation with a sensitivity and a specificity above 83%. This study confirms the possibility to perform QC on IMU joint orientation data based on raw signal features. This innovative QC approach may be of particular interest in a big data context, such as for remote-monitoring of patients' mobility.

Multiscale Pores in TBCs for Lower Thermal Conductivity

NASA Astrophysics Data System (ADS)

Zhang, Wei-Wei; Li, Guang-Rong; Zhang, Qiang; Yang, Guan-Jun

2017-08-01

The morphology and pattern (including orientation and aspect ratio) of pores in thermal barrier coatings (TBCs) significantly affect their thermal insulation performance. In this work, finite element analysis was used to comprehensively understand the thermal insulation effect of pores and correlate the effective thermal conductivity with the structure. The results indicated that intersplat pores, and in particular their aspect ratio, dominantly affect the heat transfer in the top coat. The effective thermal conductivity decreased as a function of aspect ratio, since a larger aspect ratio often corresponds to a greater proportion of effective length of the pores. However, in conventional plasma-sprayed TBCs, intersplat pores often fail to maximize thermal insulation due to their distinct lower aspect ratios. Therefore, considering this effect of aspect ratio, a new structure design with multiscale pores is proposed and a corresponding structural model developed to correlate the thermal properties with this pore-rich structure. The predictions of the model are well consistent with experimental data. This study provides comprehensive understanding of the effect of pores on the thermal insulation performance, shedding light on the possibility of structural tailoring to obtain advanced TBCs with lower thermal conductivity.

Improved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials.

PubMed

Lee, Bang Yeon; Kang, Su-Tae; Yun, Hae-Bum; Kim, Yun Yong

2016-01-12

The distribution of fiber orientation is an important factor in determining the mechanical properties of fiber-reinforced concrete. This study proposes a new image analysis technique for improving the evaluation accuracy of fiber orientation distribution in the sectional image of fiber-reinforced concrete. A series of tests on the accuracy of fiber detection and the estimation performance of fiber orientation was performed on artificial fiber images to assess the validity of the proposed technique. The validation test results showed that the proposed technique estimates the distribution of fiber orientation more accurately than the direct measurement of fiber orientation by image analysis.

Improved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials

PubMed Central

Lee, Bang Yeon; Kang, Su-Tae; Yun, Hae-Bum; Kim, Yun Yong

2016-01-01

The distribution of fiber orientation is an important factor in determining the mechanical properties of fiber-reinforced concrete. This study proposes a new image analysis technique for improving the evaluation accuracy of fiber orientation distribution in the sectional image of fiber-reinforced concrete. A series of tests on the accuracy of fiber detection and the estimation performance of fiber orientation was performed on artificial fiber images to assess the validity of the proposed technique. The validation test results showed that the proposed technique estimates the distribution of fiber orientation more accurately than the direct measurement of fiber orientation by image analysis. PMID:28787839

Orientation estimation algorithm applied to high-spin projectiles

NASA Astrophysics Data System (ADS)

Long, D. F.; Lin, J.; Zhang, X. M.; Li, J.

2014-06-01

High-spin projectiles are low cost military weapons. Accurate orientation information is critical to the performance of the high-spin projectiles control system. However, orientation estimators have not been well translated from flight vehicles since they are too expensive, lack launch robustness, do not fit within the allotted space, or are too application specific. This paper presents an orientation estimation algorithm specific for these projectiles. The orientation estimator uses an integrated filter to combine feedback from a three-axis magnetometer, two single-axis gyros and a GPS receiver. As a new feature of this algorithm, the magnetometer feedback estimates roll angular rate of projectile. The algorithm also incorporates online sensor error parameter estimation performed simultaneously with the projectile attitude estimation. The second part of the paper deals with the verification of the proposed orientation algorithm through numerical simulation and experimental tests. Simulations and experiments demonstrate that the orientation estimator can effectively estimate the attitude of high-spin projectiles. Moreover, online sensor calibration significantly enhances the estimation performance of the algorithm.

For the Love of Science: Learning Orientation and Physical Science Success

NASA Astrophysics Data System (ADS)

Hazari, Zahra; Potvin, Geoff; Tai, Robert; Almarode, John

2010-02-01

An individual's motivational orientation serves as a drive to action and can influence their productivity. This study examines how the goal orientation of students towards the pursuit of their graduate degree in physics and chemistry influences their future success outcomes as practicing scientists. Two main orientations are focused on: performance (or ego/ability) orientation and learning (or task/mastery) orientation. The data was obtained as part of Project Crossover, which applied a mixed methodological approach to studying the transition from graduate student to scientist in the physical sciences. Using regression analysis on survey data from 2353 PhD holders in physics and chemistry, we found that individuals exhibiting a learning orientation were more productive than those exhibiting a performance orientation in terms of first-author publications and grant funding. Furthermore, given equal salary, learning-oriented physical scientists produced more first-author publications than average. )

Exploring Value Orientations toward the Human-Nature Relationship: A Comparison of Urban Youth in Minnesota, USA and Guangdong, China

ERIC Educational Resources Information Center

Li, Jie; Ernst, Julie

2015-01-01

Research exploring urban youths' value orientations toward the human-nature relationship was conducted with 59 students from a school in Minneapolis, Minnesota (USA) and 51 students from a school in Guangzhou, Guangdong (China). Quantitative findings suggest that the majority of participants in both groups shared a similar value orientation,…

Vocational Career Orientation Guide. Arkansas Guidebook for Career Orientation. 7th-8th-9th Grades. Revised.

ERIC Educational Resources Information Center

Arkansas State Univ., State University.

This curriculum package contains materials for teaching the career orientation course in the junior high schools of Arkansas. Following the introduction, which describes the course and provides a rationale for it, along with instructions to teachers for conducting the course, the package is divided into 35 units organized under five major…

Long-Term Orientation and Educational Performance. Working Paper 174

ERIC Educational Resources Information Center

Figlio, David; Giuliano, Paola; Özek, Umut; Sapienza, Paola

2017-01-01

We use remarkable population-level administrative education and birth records from Florida to study the role of Long-Term Orientation on the educational attainment of immigrant students living in the US. Controlling for the quality of schools and individual characteristics, students from countries with long-term oriented attitudes perform better…

Cross-Lagged Relationships between Career Aspirations and Goal Orientation in Early Adolescents

ERIC Educational Resources Information Center

Creed, Peter; Tilbury, Clare; Buys, Nick; Crawford, Meegan

2011-01-01

We surveyed 217 students (145 girls; average age = 14.6 years) on two occasions, twelve months apart, on measures of career aspirations (job aspirations, job expectations, educational aspirations) and goal orientation (learning, performance-prove, performance-avoid), and tested the causal relationship between goal orientation and aspirations. We…

The Influence of Emotional Stimuli on Attention Orienting and Inhibitory Control in Pediatric Anxiety

PubMed Central

Mueller, Sven C.; Hardin, Michael G.; Mogg, Karin; Benson, Valerie; Bradley, Brendan P.; Reinholdt-Dunne, Marie Louise; Liversedge, Simon P.; Pine, Daniel S.; Ernst, Monique

2012-01-01

Background Anxiety disorders are highly prevalent in children and adolescents, and are associated with aberrant emotion-related attention orienting and inhibitory control. While recent studies conducted with high-trait anxious adults have employed novel emotion-modified antisaccade tasks to examine the influence of emotional information on orienting and inhibition, similar studies have yet to be conducted in youths. Methods Participants were 22 children/adolescents diagnosed with an anxiety disorder, and 22 age-matched healthy comparison youths. Participants completed an emotion-modified antisaccade task that was similar to those used in studies of high-trait anxious adults. This task probed the influence of abruptly appearing neutral, happy, angry, or fear stimuli on orienting (prosaccade) or inhibitory (antisaccade) responses. Results Anxious compared to healthy children showed facilitated orienting towards angry stimuli. With respect to inhibitory processes, threat-related information improved antisaccade accuracy in healthy but not anxious youth. These findings were not linked to individual levels of reported anxiety or specific anxiety disorders. Conclusions Findings suggest that anxious relative to healthy children manifest enhanced orienting towards threat-related stimuli. Additionally, the current findings suggest that threat may modulate inhibitory control during adolescent development. PMID:22409260

Identifying competitive strategies to improve the performance of hospitals in a competitive environment.

PubMed

Chang, Chuan-Hui; Chiao, Yu-Ching; Tsai, Yafang

2017-11-21

This study is based on competitive dynamics theory, and discusses competitive actions (including their implementation requirements, strategic orientation, and action complexity) that influence hospitals' performance, while also meeting the requirements of Taiwan's "global budget" insurance payment policy. In order to investigate the possible actions of hospitals, the study was conducted in two stages. The first stage investigated the actions of hospitals from March 1 to May 31, 2009. Semi-structured questionnaires were used, which included in-depth interviews with senior supervisors of 10 medium- and large-scale hospitals in central Taiwan. This stage collected data related to the types of actions adopted by the hospitals in previous years. The second stage was based on the data collected from the first stage and on developed questionnaires, which were distributed from June 29 to November 1, 2009. The questionnaires were given to 20 superintendents, deputy superintendents, and supervisors responsible for the management of a hospital, and focused on medical centers and regional hospitals in central Taiwan in order to determine the types and number of competitive actions. First, the strategic orientation of an action has a significantly positive influence on subjective performance. Second, action complexity has a significantly positive influence on the subjective and the objective performance of a hospital. Third, the implementation requirements of actions do not have a significantly positive impact on the subjective or the objective performance of a hospital. Managers facing a competitive healthcare environment should adopt competitive strategies to improve the performance of the hospital.

Optical Orientation of Mn2+ Ions in GaAs in Weak Longitudinal Magnetic Fields

NASA Astrophysics Data System (ADS)

Akimov, I. A.; Dzhioev, R. I.; Korenev, V. L.; Kusrayev, Yu. G.; Sapega, V. F.; Yakovlev, D. R.; Bayer, M.

2011-04-01

We report on optical orientation of Mn2+ ions in bulk GaAs subject to weak longitudinal magnetic fields (B≤100mT). A manganese spin polarization of 25% is directly evaluated by using spin-flip Raman scattering. The dynamical Mn2+ polarization occurs due to the s-d exchange interaction with optically oriented conduction band electrons. Time-resolved photoluminescence reveals a nontrivial electron spin dynamics, where the oriented Mn2+ ions tend to stabilize the electron spins.

Optical orientation of Mn2+ ions in GaAs in weak longitudinal magnetic fields.

PubMed

Akimov, I A; Dzhioev, R I; Korenev, V L; Kusrayev, Yu G; Sapega, V F; Yakovlev, D R; Bayer, M

2011-04-08

We report on optical orientation of Mn2+ ions in bulk GaAs subject to weak longitudinal magnetic fields (B≤100  mT). A manganese spin polarization of 25% is directly evaluated by using spin-flip Raman scattering. The dynamical Mn2+ polarization occurs due to the s-d exchange interaction with optically oriented conduction band electrons. Time-resolved photoluminescence reveals a nontrivial electron spin dynamics, where the oriented Mn2+ ions tend to stabilize the electron spins.

Employee customer orientation in context: how the environment moderates the influence of customer orientation on performance outcomes.

PubMed

Grizzle, Jerry W; Zablah, Alex R; Brown, Tom J; Mowen, John C; Lee, James M

2009-09-01

This empirical study evaluated the moderating effects of unit customer orientation (CO) climate and climate strength on the relationship between service workers' level of CO and their performance of customer-oriented behaviors (COBs). In addition, the study examined whether aggregate COB performance influences unit profitability. Building on multisource, multilevel data, the study's results suggest that the influence of employee CO on employee COB performance is positive when the unit's CO climate is relatively high and that the constructs are unrelated when unit CO climate is relatively low. In addition, the data reveal that unit COB performance influences unit profitability by enhancing revenues without a concomitant increase in costs. The study's results underscore the theoretical importance of considering cross-level influencers of employee-level relationships and suggest that managers should focus on creating a climate that is supportive of COBs if their units are to profit from the recruitment, hiring, and retention of customer-oriented employees.

High Performance Object-Oriented Scientific Programming in Fortran 90

NASA Technical Reports Server (NTRS)

Norton, Charles D.; Decyk, Viktor K.; Szymanski, Boleslaw K.

1997-01-01

We illustrate how Fortran 90 supports object-oriented concepts by example of plasma particle computations on the IBM SP. Our experience shows that Fortran 90 and object-oriented methodology give high performance while providing a bridge from Fortran 77 legacy codes to modern programming principles. All of our object-oriented Fortran 90 codes execute more quickly thatn the equeivalent C++ versions, yet the abstraction modelling capabilities used for scentific programming are comparably powereful.

Olfactory Performance Is Predicted by Individual Sex-Atypicality, but Not Sexual Orientation

PubMed Central

Nováková, Lenka; Varella Valentová, Jaroslava; Havlíček, Jan

2013-01-01

Many previous studies have reported robust sex differences in olfactory perception. However, both men and women can be expected to vary in the degree to which they exhibit olfactory performance considered typical of their own or the opposite sex. Sex-atypicality is often described in terms of childhood gender nonconformity, which, however, is not a perfect correlate of non-heterosexual orientation. Here we explored intrasexual variability in psychophysical olfactory performance in a sample of 156 individuals (83 non-heterosexual) and found the lowest odor identification scores in heterosexual men. However, when childhood gender nonconformity was entered in the model along with sexual orientation, better odor identification scores were exhibited by gender-nonconforming men, and greater olfactory sensitivity by gender-conforming women, irrespective of their sexual orientation. Thus, sex-atypicality, but not sexual orientation predicts olfactory performance, and we propose that this might not be limited to olfaction, but represent a more general phenomenon. PMID:24244657

Olfactory performance is predicted by individual sex-atypicality, but not sexual orientation.

PubMed

Nováková, Lenka; Varella Valentová, Jaroslava; Havlíček, Jan

2013-01-01

Many previous studies have reported robust sex differences in olfactory perception. However, both men and women can be expected to vary in the degree to which they exhibit olfactory performance considered typical of their own or the opposite sex. Sex-atypicality is often described in terms of childhood gender nonconformity, which, however, is not a perfect correlate of non-heterosexual orientation. Here we explored intrasexual variability in psychophysical olfactory performance in a sample of 156 individuals (83 non-heterosexual) and found the lowest odor identification scores in heterosexual men. However, when childhood gender nonconformity was entered in the model along with sexual orientation, better odor identification scores were exhibited by gender-nonconforming men, and greater olfactory sensitivity by gender-conforming women, irrespective of their sexual orientation. Thus, sex-atypicality, but not sexual orientation predicts olfactory performance, and we propose that this might not be limited to olfaction, but represent a more general phenomenon.

Pro-Social Goals in Achievement Situations: Amity Goal Orientation Enhances the Positive Effects of Mastery Goal Orientation.

PubMed

Levontin, Liat; Bardi, Anat

2018-04-01

Research has neglected the utility of pro-social goals within achievement situations. In this article, four studies demonstrate that amity goal orientation, promoting mutual success of oneself together with others, enhances the utility of mastery goal orientation. We demonstrate this in longitudinally predicting performance (Studies 1 and 2) and in maintaining motivation after a disappointing performance (Studies 3 and 4). The studies demonstrate the same interaction effect in academic and in work achievement contexts. Specifically, whereas amity goal orientation did not predict achievement on its own, it enhanced the positive effect of mastery goal orientation. Together, these studies establish the importance of amity goal orientation while also advancing our understanding of the effects of other achievement goal orientations. We suggest future directions in examining the utility of amity goals in other contexts.

Evaluation Study of a Wireless Multimedia Traffic-Oriented Network Model

NASA Astrophysics Data System (ADS)

Vasiliadis, D. C.; Rizos, G. E.; Vassilakis, C.

2008-11-01

In this paper, a wireless multimedia traffic-oriented network scheme over a fourth generation system (4-G) is presented and analyzed. We conducted an extensive evaluation study for various mobility configurations in order to incorporate the behavior of the IEEE 802.11b standard over a test-bed wireless multimedia network model. In this context, the Quality of Services (QoS) over this network is vital for providing a reliable high-bandwidth platform for data-intensive sources like video streaming. Therefore, the main issues concerned in terms of QoS were the metrics for bandwidth of both dropped and lost packets and their mean packet delay under various traffic conditions. Finally, we used a generic distance-vector routing protocol which was based on an implementation of Distributed Bellman-Ford algorithm. The performance of the test-bed network model has been evaluated by using the simulation environment of NS-2.

VO2 nanoparticles on edge orientated graphene foam for high rate lithium ion batteries and supercapacitors

NASA Astrophysics Data System (ADS)

Ren, Guofeng; Zhang, Ruibo; Fan, Zhaoyang

2018-05-01

With the fully exposed graphene edges, high conductivity and large surface area, edge oriented graphene foam (EOGF), prepared by deposition of perpendicular graphene network encircling the struts of Ni foam, is a superior scaffold to support active materials for electrochemical applications. With VO2 as an example, EOGF loaded VO2 nanoparticle (VO2/EOGF) electrode has high rate performance as cathode in lithium ion batteries (LIBs). In addition to the Li+ intercalation into the lattice, contribution of non-diffusion-limited pseudocapacitance to the capacity is prominent at high rates. VO2/EOGF based supercapacitor also exhibits fast response, with a characteristic frequency of 15 Hz when the phase angle reaches -45°, or a relaxation time constant of 66.7 ms. These results suggest the promising potential of EOGF as a scaffold in supporting active nanomaterials for electrochemical energy storage and other applications.

Lateral spin transfer torque induced magnetic switching at room temperature demonstrated by x-ray microscopy

NASA Astrophysics Data System (ADS)

Buhl, M.; Erbe, A.; Grebing, J.; Wintz, S.; Raabe, J.; Fassbender, J.

2013-10-01

Changing and detecting the orientation of nanomagnetic structures, which can be used for durable information storage, needs to be developed towards true nanoscale dimensions for keeping up the miniaturization speed of modern nanoelectronic components. Therefore, new concepts for controlling the state of nanomagnets are currently in the focus of research in the field of nanoelectronics. Here, we demonstrate reproducible switching of a purely metallic nanopillar placed on a lead that conducts a spin-polarized current at room temperature. Spin diffusion across the metal-metal (Cu to CoFe) interface between the pillar and the lead causes spin accumulation in the pillar, which may then be used to set the magnetic orientation of the pillar. In our experiments, the detection of the magnetic state of the nanopillar is performed by direct imaging via scanning transmission x-ray microscopy (STXM).

Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care

PubMed Central

2013-01-01

Background It is well-known that health care workers in today’s general hospitals have to deal with high levels of job demands, which could have negative effects on their health, well-being, and job performance. A way to reduce job-related stress reactions and to optimize positive work-related outcomes is to raise the level of specific job resources and opportunities to recover from work. However, the question remains how to translate the optimization of the balance between job demands, job resources, and recovery opportunities into effective workplace interventions. The aim of the DISCovery project is to develop and implement tailored work-oriented interventions to improve health, well-being, and performance of health care personnel. Methods/Design A quasi-experimental field study with a non-equivalent control group pretest-posttest design will be conducted in a top general hospital. Four existing organizational departments will provide both an intervention and a comparison group. Two types of research methods are used: (1) a longitudinal web-based survey study, and (2) a longitudinal daily diary study. After base-line measures of both methods, existing and yet to be developed interventions will be implemented within the experimental groups. Follow-up measurements will be taken one and two years after the base-line measures to analyze short-term and long-term effects of the interventions. Additionally, a process evaluation and a cost-effectiveness analysis will be carried out. Discussion The DISCovery project fulfills a strong need for theory-driven and scientifically well-performed research on job stress and performance interventions. It will provide insight into (1) how a balance between job demands, job resources, and recovery from work can be optimized, (2) the short-term and long-term effects of tailored work-oriented effects, and (3) indicators for successful or unsuccessful implementation of interventions. PMID:23421647

Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care.

PubMed

Niks, Irene M W; de Jonge, Jan; Gevers, Josette M P; Houtman, Irene L D

2013-02-19

It is well-known that health care workers in today's general hospitals have to deal with high levels of job demands, which could have negative effects on their health, well-being, and job performance. A way to reduce job-related stress reactions and to optimize positive work-related outcomes is to raise the level of specific job resources and opportunities to recover from work. However, the question remains how to translate the optimization of the balance between job demands, job resources, and recovery opportunities into effective workplace interventions. The aim of the DISCovery project is to develop and implement tailored work-oriented interventions to improve health, well-being, and performance of health care personnel. A quasi-experimental field study with a non-equivalent control group pretest-posttest design will be conducted in a top general hospital. Four existing organizational departments will provide both an intervention and a comparison group. Two types of research methods are used: (1) a longitudinal web-based survey study, and (2) a longitudinal daily diary study. After base-line measures of both methods, existing and yet to be developed interventions will be implemented within the experimental groups. Follow-up measurements will be taken one and two years after the base-line measures to analyze short-term and long-term effects of the interventions. Additionally, a process evaluation and a cost-effectiveness analysis will be carried out. The DISCovery project fulfills a strong need for theory-driven and scientifically well-performed research on job stress and performance interventions. It will provide insight into (1) how a balance between job demands, job resources, and recovery from work can be optimized, (2) the short-term and long-term effects of tailored work-oriented effects, and (3) indicators for successful or unsuccessful implementation of interventions.

Extending Antecedents of Achievement Goals: The Double-Edged Sword Effect of Social-Oriented Achievement Motive and Gender Differences

ERIC Educational Resources Information Center

Nie, Youyan; Liem, Gregory Arief D.

2013-01-01

Underpinned by the hierarchical model of approach and avoidance motivation, the study examined the differential relations of individual-oriented and social-oriented achievement motives to approach and avoidance achievement goals (mastery-approach, performance-approach, mastery-avoidance, performance-avoidance). A total of 570 Chinese high school…

Conductivity of an inverse lyotropic lamellar phase under shear flow

NASA Astrophysics Data System (ADS)

Panizza, P.; Soubiran, L.; Coulon, C.; Roux, D.

2001-08-01

We report conductivity measurements on solutions of closed compact monodisperse multilamellar vesicles (the so-called ``onion texture'') formed by shearing an inverse lyotropic lamellar Lα phase. The conductivity measured in different directions as a function of the applied shear rate reveals a small anisotropy of the onion structure due to the existence of free oriented membranes. The results are analyzed in terms of a simple model that allows one to deduce the conductivity tensor of the Lα phase itself and the proportion of free oriented membranes. The variation of these two parameters is measured along a dilution line and discussed. The high value of the conductivity perpendicular to the layers with respect to that of solvent suggests the existence of a mechanism of ionic transport through the insulating solvent.

The Effects of Cell Phone and Text Message Conversations on Simulated Street Crossing.

PubMed

Banducci, Sarah E; Ward, Nathan; Gaspar, John G; Schab, Kurt R; Crowell, James A; Kaczmarski, Henry; Kramer, Arthur F

2016-02-01

A fully immersive, high-fidelity street-crossing simulator was used to examine the effects of texting on pedestrian street-crossing performance. Research suggests that street-crossing performance is impaired when pedestrians engage in cell phone conversations. Less is known about the impact of texting on street-crossing performance. Thirty-two young adults completed three distraction conditions in a simulated street-crossing task: no distraction, phone conversation, and texting. A hands-free headset and a mounted tablet were used to conduct the phone and texting conversations, respectively. Participants moved through the virtual environment via a manual treadmill, allowing them to select crossing gaps and change their gait. During the phone conversation and texting conditions, participants had fewer successful crossings and took longer to initiate crossing. Furthermore, in the texting condition, smaller percentage of time with head orientation toward the tablet, fewer number of head orientations toward the tablet, and greater percentage of total characters typed before initiating crossing predicted greater crossing success. Our results suggest that (a) texting is as unsafe as phone conversations for street-crossing performance and (b) when subjects completed most of the texting task before initiating crossing, they were more likely to make it safely across the street. Sending and receiving text messages negatively impact a range of real-world behaviors. These results may inform personal and policy decisions. © 2015, Human Factors and Ergonomics Society.

Electronic Structures of Free-Standing Nanowires made from Indirect Bandgap Semiconductor Gallium Phosphide

PubMed Central

Liao, Gaohua; Luo, Ning; Chen, Ke-Qiu; Xu, H. Q.

2016-01-01

We present a theoretical study of the electronic structures of freestanding nanowires made from gallium phosphide (GaP)—a III-V semiconductor with an indirect bulk bandgap. We consider [001]-oriented GaP nanowires with square and rectangular cross sections, and [111]-oriented GaP nanowires with hexagonal cross sections. Based on tight binding models, both the band structures and wave functions of the nanowires are calculated. For the [001]-oriented GaP nanowires, the bands show anti-crossing structures, while the bands of the [111]-oriented nanowires display crossing structures. Two minima are observed in the conduction bands, while the maximum of the valence bands is always at the Γ-point. Using double group theory, we analyze the symmetry properties of the lowest conduction band states and highest valence band states of GaP nanowires with different sizes and directions. The band state wave functions of the lowest conduction bands and the highest valence bands of the nanowires are evaluated by spatial probability distributions. For practical use, we fit the confinement energies of the electrons and holes in the nanowires to obtain an empirical formula. PMID:27307081

Structural and interfacial defects in c-axis oriented LiNbO3 thin films grown by pulsed laser deposition on Si using Al : ZnO conducting layer

NASA Astrophysics Data System (ADS)

Shandilya, Swati; Tomar, Monika; Sreenivas, K.; Gupta, Vinay

2009-05-01

Highly c-axis oriented LiNbO3 films are deposited using pulsed laser deposition on a silicon substrate using a transparent conducting Al doped ZnO layer. X-ray diffraction and Raman spectroscopic analysis show the fabrication of single phase and oriented LiNbO3 films under the optimized deposition condition. An extra peak at 905 cm-1 was observed in the Raman spectra of LiNbO3 film deposited at higher substrate temperature and higher oxygen pressure, and attributed to the presence of niobium antisite defects in the lattice. Dielectric constant and ac conductivity of oriented LiNbO3 films deposited under the static and rotating substrate modes have been studied. Films deposited under the rotating substrate mode exhibit dielectric properties close to the LiNbO3 single crystal. The cause of deviation in the dielectric properties of the film deposited under the static substrate mode, in comparison with the bulk, are discussed in the light of the possible formation of an interdiffusion layer at the interface of the LiNbO3 film and the Al : ZnO layer.

Advanced Gas Turbine (AGT) powertrain system development for automotive applications report

NASA Technical Reports Server (NTRS)

1984-01-01

This report describes progress and work performed during January through June 1984 to develop technology for an Advanced Gas Turbine (AGT) engine for automotive applications. Work performed during the first eight periods initiated design and analysis, ceramic development, component testing, and test bed evaluation. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System Program. This program is oriented at providing the United States automotive industry the high-risk long-range techology necessary to produce gas turbine engines for automobiles with reduced fuel consumption and reduced environmental impact. Technology resulting from this program is intended to reach the marketplace by the early 1990s.

Thermal Vacuum Testing of Swift XRT Ethane Heat Pipes

NASA Technical Reports Server (NTRS)

Kobel, Mark; Ku, Jentung

2003-01-01

This paper presents the results obtained from a recent ethane heat pipe program. Three identical ethane heat pipes were tested individually, and then two selected heat pipes were tested collectively in their system configuration. Heat transport, thermal conductance, and non-condensable gas tests were performed on each heat pipe. To gain insight into the reflux operation as seen at spacecraft level ground testing, the test fixture was oriented in a vertical configuration. The system level test included a computer-controlled heater designed to emulate the heat load generated at the thermoelectric cooler interface. The system performance was successfully characterized for a wide range of environmental conditions while staying within the operating limits.

Behavior of the potential-induced degradation of photovoltaic modules fabricated using flat mono-crystalline silicon cells with different surface orientations

NASA Astrophysics Data System (ADS)

Yamaguchi, Seira; Masuda, Atsushi; Ohdaira, Keisuke

2016-04-01

This paper deals with the dependence of the potential-induced degradation (PID) of flat, p-type mono-crystalline silicon solar cell modules on the surface orientation of solar cells. The investigated modules were fabricated from p-type mono-crystalline silicon cells with a (100) or (111) surface orientation using a module laminator. PID tests were performed by applying a voltage of -1000 V to shorted module interconnector ribbons with respect to an Al plate placed on the cover glass of the modules at 85 °C. A decrease in the parallel resistance of the (100)-oriented cell modules is more significant than that of the (111)-oriented cell modules. Hence, the performance of the (100)-oriented-cell modules drastically deteriorates, compared with that of the (111)-oriented-cell modules. This implies that (111)-oriented cells offer a higher PID resistance.

Integrating Reliability Analysis with a Performance Tool

NASA Technical Reports Server (NTRS)

Nicol, David M.; Palumbo, Daniel L.; Ulrey, Michael

1995-01-01

A large number of commercial simulation tools support performance oriented studies of complex computer and communication systems. Reliability of these systems, when desired, must be obtained by remodeling the system in a different tool. This has obvious drawbacks: (1) substantial extra effort is required to create the reliability model; (2) through modeling error the reliability model may not reflect precisely the same system as the performance model; (3) as the performance model evolves one must continuously reevaluate the validity of assumptions made in that model. In this paper we describe an approach, and a tool that implements this approach, for integrating a reliability analysis engine into a production quality simulation based performance modeling tool, and for modeling within such an integrated tool. The integrated tool allows one to use the same modeling formalisms to conduct both performance and reliability studies. We describe how the reliability analysis engine is integrated into the performance tool, describe the extensions made to the performance tool to support the reliability analysis, and consider the tool's performance.

Comparisons of Fabric Strength and Development in Polycrystalline Ice at Atmospheric and Basal Hydrostatic Pressures

NASA Astrophysics Data System (ADS)

Breton, Daniel; Baker, Ian; Cole, David

2013-04-01

Understanding and predicting the flow of polycrystalline ice is crucial to ice sheet modeling and paleoclimate reconstruction from ice cores. Ice flow rates depend strongly on the fabric (i.e. the distribution of grain sizes and crystallographic orientations) which evolves over time and enhances the flow rate in the direction of applied stress. The mechanisms for fabric evolution in ice have been extensively studied at atmospheric pressures, but little work has been done to observe these processes at the high pressures experienced deep within ice sheets where long-term changes in ice rheology are expected to have significance. We conducted compressive creep tests to ~10% strain on 917 kg m-3, initially randomly-oriented polycrystalline ice specimens at 0.1 (atmospheric) and 20 MPa (simulating ~2,000 m depth) hydrostatic pressures, performing microstructural analyses on the resulting deformed specimens to characterize the evolution and strength of crystal fabric. Our microstructural analysis technique simultaneously collects grain shape and size data from Scanning Electron Microscope (SEM) micrographs and obtains crystallographic orientation data via Electron BackScatter Diffraction (EBSD). Combining these measurements allows rapid analysis of the ice fabric over large numbers of grains, yielding statistically useful numbers of grain size and orientation data. We present creep and microstructural data to demonstrate pressure-dependent effects on the mechanical and microstructural evolution of polycrystalline ice and discuss possible mechanisms for the observed differences.

The mediating role of demand and control in the relationship between leadership behaviour and employee distress: a cross-sectional study.

PubMed

Lornudd, Caroline; Tafvelin, Susanne; von Thiele Schwarz, Ulrica; Bergman, David

2015-02-01

The relationship between leadership and employee distress is well established, however, the processes involved in this relationship remain largely unclear. For a stretched nursing workforce, understanding in what ways leadership may influence employee distress is particularly important. To examine possible mediating effects of the work environment factors demand and control in the relationship between leadership behaviour in change, production, and employee orientation and employee distress. Cross-sectional study design. The study was conducted at a large county council in Sweden providing both institutional and non-institutional care. A random sample of 1249 employees (primarily nurses, but also a wide range of other healthcare professionals and administrative staff), who had a healthcare manager that was about to enter a leadership development programme (n=171), responded to a web-based questionnaire. The response rate was 62%. The employees rated their healthcare managers' behaviour in change, production, and employee orientation, as well as their own perceptions of level of demand, control (subdivided into decision authority and skill discretion), and five distress outcomes. Multilevel analysis was performed. The mediators demand, decision authority, and skill discretion were significant predictors of all five distress outcomes for all three leadership orientations. In eight of 15 regressions, the mediators fully explained the relationships between leadership orientations and outcomes. Four of five relationships with distress outcomes were fully mediated for change-oriented leadership, whereas two of five outcomes were fully mediated for production- and employee-oriented leadership. In all three leadership orientations, the relationship between the mediator skill discretion and the distress measure disengagement were particularly strong, with B-coefficients (-.44, p<.001) twice as high as for any of the other relationships. It seems that the way that employees perceive healthcare managers' change-oriented behaviour, and how that aspect is related to employee distress, is primarily explained by perception of demand and control. Furthermore, regardless of leadership behaviour orientation, how employees perceive their opportunity to use specific job skills plays an important role in the interplay between perception of healthcare managers' behaviour and disengagement. Copyright © 2014 Elsevier Ltd. All rights reserved.

Attentional performance is correlated with the local regional efficiency of intrinsic brain networks.

PubMed

Xu, Junhai; Yin, Xuntao; Ge, Haitao; Han, Yan; Pang, Zengchang; Tang, Yuchun; Liu, Baolin; Liu, Shuwei

2015-01-01

Attention is a crucial brain function for human beings. Using neuropsychological paradigms and task-based functional brain imaging, previous studies have indicated that widely distributed brain regions are engaged in three distinct attention subsystems: alerting, orienting and executive control (EC). Here, we explored the potential contribution of spontaneous brain activity to attention by examining whether resting-state activity could account for individual differences of the attentional performance in normal individuals. The resting-state functional images and behavioral data from attention network test (ANT) task were collected in 59 healthy subjects. Graph analysis was conducted to obtain the characteristics of functional brain networks and linear regression analyses were used to explore their relationships with behavioral performances of the three attentional components. We found that there was no significant relationship between the attentional performance and the global measures, while the attentional performance was associated with specific local regional efficiency. These regions related to the scores of alerting, orienting and EC largely overlapped with the regions activated in previous task-related functional imaging studies, and were consistent with the intrinsic dorsal and ventral attention networks (DAN/VAN). In addition, the strong associations between the attentional performance and specific regional efficiency suggested that there was a possible relationship between the DAN/VAN and task performances in the ANT. We concluded that the intrinsic activity of the human brain could reflect the processing efficiency of the attention system. Our findings revealed a robust evidence for the functional significance of the efficiently organized intrinsic brain network for highly productive cognitions and the hypothesized role of the DAN/VAN at rest.

The effect of texture on the shaft surface on the sealing performance of radial lip seals

NASA Astrophysics Data System (ADS)

Guo, Fei; Jia, XiaoHong; Gao, Zhi; Wang, YuMing

2014-07-01

On the basis of elastohydrodynamic model, the present study numerically analyzes the effect of various microdimple texture shapes, namely, circular, square, oriented isosceles triangular, on the pumping rate and the friction torque of radial lip seals, and determines the microdimple texture shape that can produce positive pumping rate. The area ratio, depth and shape dimension of a single texture are the most important geometric parameters which influence the tribological performance. According to the selected texture shape, parameter analysis is conducted to determine the optimal combination for the above three parameters. Simultaneously, the simulated performances of radial lip seal with texture on the shaft surface are compared with those of the conventional lip seal without any texture on the shaft surface.

Enhancing space transportation: The NASA program to develop electric propulsion

NASA Technical Reports Server (NTRS)

Bennett, Gary L.; Watkins, Marcus A.; Byers, David C.; Barnett, John W.

1990-01-01

The NASA Office of Aeronautics, Exploration, and Technology (OAET) supports a research and technology (R and T) program in electric propulsion to provide the basis for increased performance and life of electric thruster systems which can have a major impact on space system performance, including orbital transfer, stationkeeping, and planetary exploration. The program is oriented toward providing high-performance options that will be applicable to a broad range of near-term and far-term missions and vehicles. The program, which is being conducted through the Jet Propulsion Laboratory (JPL) and Lewis Research Center (LeRC) includes research on resistojet, arcjets, ion engines, magnetoplasmadynamic (MPD) thrusters, and electrodeless thrusters. Planning is also under way for nuclear electric propulsion (NEP) as part of the Space Exploration Initiative (SEI).

DSN human factors project

NASA Technical Reports Server (NTRS)

Chafin, R. L.; Martin, T. H.

1980-01-01

The project plan was to hold focus groups to identify the factors influencing the ease of use characteristics of software and to bond the problem. A questionnaire survey was conducted to evaluate those factors which were more appropriately measured with that method. The performance oriented factors were analyzed and relationships hypothesized. The hypotheses were put to test in the experimental phase of the project. In summary, the initial analysis indicates that there is an initial performance effect favoring computer controlled dialogue but the advantage fades fast as operators become experienced. The user documentation style is seen to have a significant effect on performance. The menu and prompt command formats are preferred by inexperienced operators. The short form mnemonic is least favored. There is no clear best command format but the short form mnemonic is clearly the worst.

Analysis of the ductility dip cracking in the nickel-base alloy 617mod

NASA Astrophysics Data System (ADS)

Eilers, A.; Nellesen, J.; Zielke, R.; Tillmann, W.

2017-03-01

While testing steam leading power plant components made of the nickel-base alloy A617mod at elevated temperatures (700 °C), ductility dip cracking (DDC) was observed in welding seams and their surroundings. In order to clarify the mechanism of crack formation, investigations were carried out on welded specimens made of A617mod. Interrupted tensile tests were performed on tensile specimens taken from the area of the welding seam. To simulate the conditions, the tensile tests were conducted at a temperature of 700 °C and with a low strain rate. Local strain fields at grain boundaries and inside single grains were determined at different deformation states by means of two-dimensional digital image correlation (DIC). Besides the strain fields, local hardnesses (nanoindentation), energy dispersive X-Ray spectroscopy (EDX), and electron backscatter diffraction (EBSD) measurements were performed. Besides information concerning the grain orientation, the EBSD measurement provides information on the coincidence site lattice (CSL) at grain boundaries as well as the Schmid factor of single grains. All results of the analysis methods mentioned above were correlated and compared to each other and related to the crack formation. Among other things, correlations between strain fields and Schmid factors were determined. The investigations show that the following influences affect the crack formation: orientation of the grain boundaries to the direction of the loading, the orientation of the grains to each other (CSL), and grain boundary sliding.

Pull or Push? Octopuses Solve a Puzzle Problem

PubMed Central

Richter, Jonas N.; Hochner, Binyamin; Kuba, Michael J.

2016-01-01

Octopuses have large brains and exhibit complex behaviors, but relatively little is known about their cognitive abilities. Here we present data from a five-level learning and problem-solving experiment. Seven octopuses (Octopus vulgaris) were first trained to open an L shaped container to retrieve food (level 0). After learning the initial task all animals followed the same experimental protocol, first they had to retrieve this L shaped container, presented at the same orientation, through a tight fitting hole in a clear Perspex partition (level 1). This required the octopuses to perform both pull and release or push actions. After reaching criterion the animals advanced to the next stage of the test, which would be a different consistent orientation of the object (level 2) at the start of the trial, an opaque barrier (level 3) or a random orientation of the object (level 4). All octopuses were successful in reaching criterion in all levels of the task. At the onset of each new level the performance of the animals dropped, shown as an increase in working times. However, they adapted quickly so that overall working times were not significantly different between levels. Our findings indicate that octopuses show behavioral flexibility by quickly adapting to a change in a task. This can be compared to tests in other species where subjects had to conduct actions comprised of a set of motor actions that cannot be understood by a simple learning rule alone. PMID:27003439

Nanostructure design for drastic reduction of thermal conductivity while preserving high electrical conductivity.

PubMed

Nakamura, Yoshiaki

2018-01-01

The design and fabrication of nanostructured materials to control both thermal and electrical properties are demonstrated for high-performance thermoelectric conversion. We have focused on silicon (Si) because it is an environmentally friendly and ubiquitous element. High bulk thermal conductivity of Si limits its potential as a thermoelectric material. The thermal conductivity of Si has been reduced by introducing grains, or wires, yet a further reduction is required while retaining a high electrical conductivity. We have designed two different nanostructures for this purpose. One structure is connected Si nanodots (NDs) with the same crystal orientation. The phonons scattering at the interfaces of these NDs occurred and it depended on the ND size. As a result of phonon scattering, the thermal conductivity of this nanostructured material was below/close to the amorphous limit. The other structure is Si films containing epitaxially grown Ge NDs. The Si layer imparted high electrical conductivity, while the Ge NDs served as phonon scattering bodies reducing thermal conductivity drastically. This work gives a methodology for the independent control of electron and phonon transport using nanostructured materials. This can bring the realization of thermoelectric Si-based materials that are compatible with large scale integrated circuit processing technologies.

Role of orbital overlap in atomic manipulation

NASA Astrophysics Data System (ADS)

Jarvis, Sam; Sweetman, Adam; Bamidele, Joseph; Kantorovich, Lev; Moriarty, Philip

2012-06-01

We conduct ab initio simulations illustrating that the ability to achieve atomic manipulation using a dynamic force microscope depends on the precise orientation of the dangling bond(s) at the tip apex and their charge density with respect to those of surface atoms. Using the Si(100)-c(4×2) surface as a prototype, we demonstrate that it is possible to select tip apices capable of performing atomic manipulation tasks which are unachievable using another choice of apex. Specific tip apices can be identified via examination of F(z) curves taken at different lateral positions.

A study on aircraft map display location and orientation

NASA Technical Reports Server (NTRS)

Baty, D. L.; Wempe, T.; Huff, E.

1973-01-01

Six airline pilots participated in a fixed-based simulator study to determine the effects of two horizontal situation display (HSD/map) panel locations relative to the vertical situation display (VSD), and of three map orientations on manual piloting performance. Pilot comments and opinions were formally obtained. Significant performance differences were found between wind conditions and among pilots but not between map locations and orientations. The results also illustrate the potential tracking accuracy of such a display. Recommendations concerning display location and map orientation are made.

A study on aircraft map display location and orientation

NASA Technical Reports Server (NTRS)

Baty, D. L.; Wempe, T. E.; Huff, E. M.

1974-01-01

Six airline pilots participated in a fixed-base simulator study to determine the effects of two horizontal situation display (HSD/map) panel locations relative to the vertical situation display (VSD), and of three map orientations on manual piloting performance. Pilot comments and opinions were formally obtained. Significant performance differences were found between wind conditions and among pilots, but not between map locations and orientations. The results also illustrate the potential tracking accuracy of such a display. Recommendations concerning display location and map orientation are made.

Relations between Classroom Goal Structures and Students' Goal Orientations in Mathematics Classes: When Is a Mastery Goal Structure Adaptive?

ERIC Educational Resources Information Center

Skaalvik, Einar M.; Federici, Roger A.

2016-01-01

The purpose of this study was to test possible interactions between mastery and performance goal structures in mathematics classrooms when predicting students' goal orientations. More specifically, we tested if the degree of performance goal structure moderated the associations between mastery goal structure and students' goal orientations.…

Using a Computerised Graphics Package to Achieve a Technology-Oriented Classroom

ERIC Educational Resources Information Center

Aladejana, Francisca; Idowu, Lanre

2009-01-01

The present situation in Nigeria involves students of fine arts, a practical-oriented subject, being exposed to poor methods of teaching with consequent poor performances. This study examined the extent to which the use of a computerised graphics package could make the classroom technology-oriented and affect the performance of learners. This is…

Goal Orientations Predict Academic Performance beyond Intelligence and Personality

ERIC Educational Resources Information Center

Steinmayr, Ricarda; Bipp, Tanja; Spinath, Birgit

2011-01-01

Goal orientations are thought to be an important predictor of scholastic achievement. The present paper investigated the joint influence of goal orientations, intelligence, and personality on school performance in a sample of N=520 11th and 12th graders (303 female; mean age M=16.94 years). Intelligence, the Big Five factors of personality…

Culture and first-person pronouns.

PubMed

Na, Jinkyung; Choi, Incheol

2009-11-01

Priming research has shown that repeated exposures to first-person singular pronouns (I, my, me, mine) activate an individualistic orientation, whereas first-person plural pronouns (we, our, us, ours) activate a collectivistic orientation. However, little research has been done to explore the opposite direction of influence such that one's cultural orientation determines one's choice between first-person singular versus plural pronouns. The authors conducted three studies to examine the effects of one's cultural orientation on one's use of first-person possessive pronouns. Results show that, compared to their individualistic counterparts, participants who have a collectivistic orientation, chronically or temporarily by priming, preferred to use first-person plural possessive pronouns.

Electrical conductivity modeling and experimental study of densely packed SWCNT networks.

PubMed

Jack, D A; Yeh, C-S; Liang, Z; Li, S; Park, J G; Fielding, J C

2010-05-14

Single-walled carbon nanotube (SWCNT) networks have become a subject of interest due to their ability to support structural, thermal and electrical loadings, but to date their application has been hindered due, in large part, to the inability to model macroscopic responses in an industrial product with any reasonable confidence. This paper seeks to address the relationship between macroscale electrical conductivity and the nanostructure of a dense network composed of SWCNTs and presents a uniquely formulated physics-based computational model for electrical conductivity predictions. The proposed model incorporates physics-based stochastic parameters for the individual nanotubes to construct the nanostructure such as: an experimentally obtained orientation distribution function, experimentally derived length and diameter distributions, and assumed distributions of chirality and registry of individual CNTs. Case studies are presented to investigate the relationship between macroscale conductivity and nanostructured variations in the bulk stochastic length, diameter and orientation distributions. Simulation results correspond nicely with those available in the literature for case studies of conductivity versus length and conductivity versus diameter. In addition, predictions for the increasing anisotropy of the bulk conductivity as a function of the tube orientation distribution are in reasonable agreement with our experimental results. Examples are presented to demonstrate the importance of incorporating various stochastic characteristics in bulk conductivity predictions. Finally, a design consideration for industrial applications is discussed based on localized network power emission considerations and may lend insight to the design engineer to better predict network failure under high current loading applications.

Is the linear modeling technique good enough for optimal form design? A comparison of quantitative analysis models.

PubMed

Lin, Yang-Cheng; Yeh, Chung-Hsing; Wang, Chen-Cheng; Wei, Chun-Chun

2012-01-01

How to design highly reputable and hot-selling products is an essential issue in product design. Whether consumers choose a product depends largely on their perception of the product image. A consumer-oriented design approach presented in this paper helps product designers incorporate consumers' perceptions of product forms in the design process. The consumer-oriented design approach uses quantification theory type I, grey prediction (the linear modeling technique), and neural networks (the nonlinear modeling technique) to determine the optimal form combination of product design for matching a given product image. An experimental study based on the concept of Kansei Engineering is conducted to collect numerical data for examining the relationship between consumers' perception of product image and product form elements of personal digital assistants (PDAs). The result of performance comparison shows that the QTTI model is good enough to help product designers determine the optimal form combination of product design. Although the PDA form design is used as a case study, the approach is applicable to other consumer products with various design elements and product images. The approach provides an effective mechanism for facilitating the consumer-oriented product design process.

Is the Linear Modeling Technique Good Enough for Optimal Form Design? A Comparison of Quantitative Analysis Models

PubMed Central

Lin, Yang-Cheng; Yeh, Chung-Hsing; Wang, Chen-Cheng; Wei, Chun-Chun

2012-01-01

How to design highly reputable and hot-selling products is an essential issue in product design. Whether consumers choose a product depends largely on their perception of the product image. A consumer-oriented design approach presented in this paper helps product designers incorporate consumers' perceptions of product forms in the design process. The consumer-oriented design approach uses quantification theory type I, grey prediction (the linear modeling technique), and neural networks (the nonlinear modeling technique) to determine the optimal form combination of product design for matching a given product image. An experimental study based on the concept of Kansei Engineering is conducted to collect numerical data for examining the relationship between consumers' perception of product image and product form elements of personal digital assistants (PDAs). The result of performance comparison shows that the QTTI model is good enough to help product designers determine the optimal form combination of product design. Although the PDA form design is used as a case study, the approach is applicable to other consumer products with various design elements and product images. The approach provides an effective mechanism for facilitating the consumer-oriented product design process. PMID:23258961

Organic heterojunctions: Contact-induced molecular reorientation, interface states, and charge re-distribution

PubMed Central

Opitz, Andreas; Wilke, Andreas; Amsalem, Patrick; Oehzelt, Martin; Blum, Ralf-Peter; Rabe, Jürgen P.; Mizokuro, Toshiko; Hörmann, Ulrich; Hansson, Rickard; Moons, Ellen; Koch, Norbert

2016-01-01

We reveal the rather complex interplay of contact-induced re-orientation and interfacial electronic structure – in the presence of Fermi-level pinning – at prototypical molecular heterojunctions comprising copper phthalocyanine (H16CuPc) and its perfluorinated analogue (F16CuPc), by employing ultraviolet photoelectron and X-ray absorption spectroscopy. For both layer sequences, we find that Fermi-level (EF) pinning of the first layer on the conductive polymer substrate modifies the work function encountered by the second layer such that it also becomes EF-pinned, however, at the interface towards the first molecular layer. This results in a charge transfer accompanied by a sheet charge density at the organic/organic interface. While molecules in the bulk of the films exhibit upright orientation, contact formation at the heterojunction results in an interfacial bilayer with lying and co-facial orientation. This interfacial layer is not EF-pinned, but provides for an additional density of states at the interface that is not present in the bulk. With reliable knowledge of the organic heterojunction’s electronic structure we can explain the poor performance of these in photovoltaic cells as well as their valuable function as charge generation layer in electronic devices. PMID:26887445

Social Milieu Oriented Routing: A New Dimension to Enhance Network Security in WSNs.

PubMed

Liu, Lianggui; Chen, Li; Jia, Huiling

2016-02-19

In large-scale wireless sensor networks (WSNs), in order to enhance network security, it is crucial for a trustor node to perform social milieu oriented routing to a target a trustee node to carry out trust evaluation. This challenging social milieu oriented routing with more than one end-to-end Quality of Trust (QoT) constraint has proved to be NP-complete. Heuristic algorithms with polynomial and pseudo-polynomial-time complexities are often used to deal with this challenging problem. However, existing solutions cannot guarantee the efficiency of searching; that is, they can hardly avoid obtaining partial optimal solutions during a searching process. Quantum annealing (QA) uses delocalization and tunneling to avoid falling into local minima without sacrificing execution time. This has been proven a promising way to many optimization problems in recently published literatures. In this paper, for the first time, with the help of a novel approach, that is, configuration path-integral Monte Carlo (CPIMC) simulations, a QA-based optimal social trust path (QA_OSTP) selection algorithm is applied to the extraction of the optimal social trust path in large-scale WSNs. Extensive experiments have been conducted, and the experiment results demonstrate that QA_OSTP outperforms its heuristic opponents.

A ROle-Oriented Filtering (ROOF) approach for collaborative recommendation

NASA Astrophysics Data System (ADS)

Ghani, Imran; Jeong, Seung Ryul

2016-09-01

In collaborative filtering (CF) recommender systems, existing techniques frequently focus on determining similarities among users' historical interests. This generally refers to situations in which each user normally plays a single role and his/her taste remains consistent over the long term. However, we note that existing techniques have not been significantly employed in a role-oriented context. This is especially so in situations where users may change their roles over time or play multiple roles simultaneously, while still expecting to access relevant information resources accordingly. Such systems include enterprise architecture management systems, e-commerce sites or journal management systems. In scenarios involving existing techniques, each user needs to build up very different profiles (preferences and interests) based on multiple roles which change over time. Should this not occur to a satisfactory degree, their previous information will either be lost or not utilised at all. To limit the occurrence of such issues, we propose a ROle-Oriented Filtering (ROOF) approach focusing on the manner in which multiple user profiles are obtained and maintained over time. We conducted a number of experiments using an enterprise architecture management scenario. In so doing, we observed that the ROOF approach performs better in comparison with other existing collaborative filtering-based techniques.

High temperature low-cycle fatigue mechanisms in single crystals of nickel-based superalloy Mar-M 200

NASA Technical Reports Server (NTRS)

Milligan, W. W.; Jayaraman, N.

1984-01-01

Twenty three high temperature low-cycle fatigue tests were conducted on single crystals of the nickel-based superalloy Mar-M 200. Tests were conducted at 760 and 870 C. SEM fractography and transmission electron microscopy were used to determine mechanisms responsible for the observed orientation dependent fatigue behavior. It has been concluded that the plastic characteristics of the alloy lead to orientation-dependent strain hardening and fatigue lives at 760 C. At 870 C, the elastic characteristics of the alloy dominated the behavior, even though the plastic strain ranges were about the same as they were at 760 C. This led to orientation-dependent fatigue lives, but the trends were not the same as they were at 760 C.

Rolling with the flow: bumblebees flying in unsteady wakes.

PubMed

Ravi, Sridhar; Crall, James D; Fisher, Alex; Combes, Stacey A

2013-11-15

Our understanding of how variable wind in natural environments affects flying insects is limited because most studies of insect flight are conducted in either smooth flow or still air conditions. Here, we investigate the effects of structured, unsteady flow (the von Karman vortex street behind a cylinder) on the flight performance of bumblebees (Bombus impatiens). Bumblebees are 'all-weather' foragers and thus frequently experience variable aerial conditions, ranging from fully mixed, turbulent flow to unsteady, structured vortices near objects such as branches and stems. We examined how bumblebee flight performance differs in unsteady versus smooth flow, as well as how the orientation of unsteady flow structures affects their flight performance, by filming bumblebees flying in a wind tunnel under various flow conditions. The three-dimensional flight trajectories and orientations of bumblebees were quantified in each of three flow conditions: (1) smooth flow, (2) the unsteady wake of a vertical cylinder (inducing strong lateral disturbances) and (3) the unsteady wake of a horizontal cylinder (inducing strong vertical disturbances). In both unsteady conditions, bumblebees attenuated the disturbances induced by the wind quite effectively, but still experienced significant translational and rotational fluctuations as compared with flight in smooth flow. Bees appeared to be most sensitive to disturbance along the lateral axis, displaying large lateral accelerations, translations and rolling motions in response to both unsteady flow conditions, regardless of orientation. Bees also displayed the greatest agility around the roll axis, initiating voluntary casting maneuvers and correcting for lateral disturbances mainly through roll in all flow conditions. Both unsteady flow conditions reduced the upstream flight speed of bees, suggesting an increased cost of flight in unsteady flow, with potential implications for foraging patterns and colony energetics in natural, variable wind environments.

Parents' experience of undertaking an intensive cognitive orientation to daily occupational performance (CO-OP) group for children with cerebral palsy.

PubMed

Jackman, Michelle; Novak, Iona; Lannin, Natasha; Froude, Elspeth

2017-05-01

The purpose of this study was to explore the experience of parents of children with cerebral palsy (CP) who participated in an intensive cognitive orientation to daily occupational performance (CO-OP) group program addressing child chosen goals. Participants were six parents of children with CP who participated in a CO-OP upper limb task-specific training program. Parents participated in semi-structured interviews conducted via phone. A grounded theory approach was used. Interviews were transcribed verbatim and coded to identify categories and overarching themes of the parent experience of CO-OP. The theory of CO-OP for children with CP was one of offering a unique and motivating learning experience for both the child and the parent, differing from other therapeutic approaches that families had previously been involved in. Five categories were identified: the unique benefits of CO-OP; the importance of intensity; the child's motivation; challenging the parent role; and the benefits and challenges of therapy within a group context. Parents felt that CO-OP was a worthwhile intervention that leads to achievement of goals involving upper limb function and had the capacity to be transferred to future goals. Intensity of therapy and a child's motivation were identified as important factors in improvements. Further studies using quantitative research methods are warranted to investigate the benefits of CO-OP for children with neurological conditions. Implications for rehabilitation The cognitive orientation to daily occupational performance (CO-OP) is a promising upper limb cognitive motor training intervention for children with cerebral palsy. In a small sample, parents perceived that CO-OP leads to achievement of upper limb goals. Intensity of therapy, the child's motivation and the parents' ability to "step-back" were identified as important to the success of CO-OP.

Experimental investigation into the coupling effects of magnetic field, temperature and pressure on electrical resistivity of non-oriented silicon steel sheet

NASA Astrophysics Data System (ADS)

Xiao, Lijun; Yu, Guodong; Zou, Jibin; Xu, Yongxiang

2018-05-01

In order to analyze the performance of magnetic device which operate at high temperature and high pressure, such as submersible motor, oil well transformer, the electrical resistivity of non-oriented silicon steel sheets is necessary for precise analysis. But the reports of the examination of the measuring method suitable for high temperature up to 180 °C and high pressure up to 140 MPa are few. In this paper, a measurement system based on four-probe method and Archimedes spiral shape measurement specimens is proposed. The measurement system is suitable for measuring the electrical resistivity of unconventional specimens under high temperature and high pressure and can simultaneously consider the influence of the magnetic field on the electrical resistivity. It can be seen that the electrical resistivity of the non-oriented silicon steel sheets will fluctuate instantaneously when the magnetic field perpendicular to the conductive path of the specimens is loaded or removed. The amplitude and direction of the fluctuation are not constant. Without considering the effects of fluctuations, the electrical resistivity of the non-oriented silicon steel sheets is the same when the magnetic field is loaded or removed. And the influence of temperature on the electrical resistivity of the non-oriented silicon steel sheet is still the greatest even though the temperature and the pressure are coupled together. The measurement results also show that the electrical resistivity varies linearly with temperature, so the temperature coefficient of resistivity is given in the paper.

Conditional Mediation of Absorptive Capacity and Environment in International Entrepreneurial Orientation of Family Businesses

PubMed Central

Hernández-Perlines, Felipe; Xu, Wenkai

2018-01-01

This study analyzes the effect of conditional mediation of environment-absorptive capacity in international entrepreneurial orientation of family businesses. Results involve data from 218 Spanish family businesses, analyzed with SmartPLS 3.2.7 software. This paper presents a relevant contribution both to the academic field and the performance of family firms, helping to understand the process of transforming international entrepreneurial orientation into a better international performance through absorptive capacity while family businesses invest their efforts in aligning international entrepreneurial orientation and absorptive capacity with international results, bearing in mind the positive moderator effect of environment. The most relevant contribution of this work is to integrate in the same model the mediating effect of the absorption capacity and the moderating effect of the environment: the effect of the international entrepreneurial orientation on the international performance of family businesses improves with the mediation of the absorptive capacity (the variability of international performance goes from 32.5 to 40.6%) and the moderation of the environment (to variability of international performance goes from 40.6 to 45.3%). PMID:29472881

Conditional Mediation of Absorptive Capacity and Environment in International Entrepreneurial Orientation of Family Businesses.

PubMed

Hernández-Perlines, Felipe; Xu, Wenkai

2018-01-01

This study analyzes the effect of conditional mediation of environment-absorptive capacity in international entrepreneurial orientation of family businesses. Results involve data from 218 Spanish family businesses, analyzed with SmartPLS 3.2.7 software. This paper presents a relevant contribution both to the academic field and the performance of family firms, helping to understand the process of transforming international entrepreneurial orientation into a better international performance through absorptive capacity while family businesses invest their efforts in aligning international entrepreneurial orientation and absorptive capacity with international results, bearing in mind the positive moderator effect of environment. The most relevant contribution of this work is to integrate in the same model the mediating effect of the absorption capacity and the moderating effect of the environment: the effect of the international entrepreneurial orientation on the international performance of family businesses improves with the mediation of the absorptive capacity (the variability of international performance goes from 32.5 to 40.6%) and the moderation of the environment (to variability of international performance goes from 40.6 to 45.3%).

Thermal Conductivity of Polymer/Nano-filler Blends

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Delozier, Donovan M.; Working, Dennis C.; Connell, John W.; Smith, Joseph G.; Sun, Y. P.; Lin, Y.

2006-01-01

To improve the thermal conductivity of an ethylene vinyl acetate copolymer, Elvax 260 was compounded with three carbon based nano-fillers. Multiwalled carbon nanotubes (MWCNT), vapor grown carbon nanofibers (CNF) and expanded graphite (EG) were investigated. In an attempt to improve compatibility between the Elvax and nanofillers, MWCNTs and EGs were modified through non covalent and covalent attachment of alkyl groups. Ribbons were extruded to form samples in which the nanofillers were aligned, and samples were also fabricated by compression molding in which the nano-fillers were randomly oriented. The thermal properties were evaluated by DSC and TGA, and mechanical properties of the aligned samples were determined by tensile testing. The degree of dispersion and alignment of the nanoparticles were investigated using high-resolution scanning electron microscopy. Thermal conductivity measurements were performed using a Nanoflash technique. The thermal conductivity of the samples was measured in both the direction of alignment as well as perpendicular to that direction. The results of this study will be presented.

Internal marketing, customer orientation, and organizational commitment: moderating effects of work status.

PubMed

Huang, Meiju; Chen, Mei-Yen

2013-08-01

Associations among internal marketing, customer orientation, and organizational commitment were examined, particularly with regard to the moderating effects of work status on the relationships between internal marketing and customer orientation or organizational commitment, in a cross-sectional design with structural equation modeling. Two studies (Ns = 119 and 251) were conducted among full- and part-time service employees at Taipei Sports Centers. Internal marketing was associated with organizational commitment and customer orientation. Customer orientation was associated with organizational commitment and partially mediated the relation between internal marketing and organizational commitment. Furthermore, work status significantly moderated the relationships between internal marketing and customer orientation but not between internal marketing and organizational commitment. Implications and directions for future research were discussed.

Characterizing the Achievement Motivation Orientation of Children from Low- and Middle-Income Families

ERIC Educational Resources Information Center

Day, Crystal A.; Burns, Barbara M.

2011-01-01

Research Findings: The current study examined achievement motivation orientation in preschool-age children from low- and middle-income families. Participants were 126 children who were attending an urban Head Start site or a private preschool. Children's motivation orientation was assessed as being performance oriented or mastery oriented using a…

Engineering negative differential conductance with the Cu(111) surface state.

PubMed

Heinrich, B W; Rastei, M V; Choi, D-J; Frederiksen, T; Limot, L

2011-12-09

Low-temperature scanning tunneling microscopy and spectroscopy are employed to investigate electron tunneling from a C60-terminated tip into a Cu(111) surface. Tunneling between a C60 orbital and the Shockley surface states of copper is shown to produce negative differential conductance (NDC) contrary to conventional expectations. NDC can be tuned through barrier thickness or C60 orientation up to complete extinction. The orientation dependence of NDC is a result of a symmetry matching between the molecular tip and the surface states.

Validation of the Spanish Version of the Inventory of Suicide Orientation--ISO 30 in Adolescent Students of Educational Institutions in Medellin--Colombia

ERIC Educational Resources Information Center

Paniagua-Suárez, Ramón E.; González-Posada, Carlos M.; Rueda-Ramírez, Sandra M.

2016-01-01

Inventory of Suicide Orientation--ISO 30, it is a self-report scale that measures risk of adolescents suicide orientation. Although the risk of adolescents suicide is on the public agenda in Colombia actually, there is no study to analyze the psychometric properties of ISO 30, and for this reason, the present study is conducted with a random…

Effects of Field and Job Oriented Technical Retraining on Manpower Utilization of the Unemployed. Vocational-Industrial Education Research Report. Final Report.

ERIC Educational Resources Information Center

Bjorkquist, David C.

A job-oriented program emphasizing application to the specific occupation of tool design was compared with a field-oriented program intended to give a broad basic preparation for a variety of jobs in the field of mechanical technology. Both programs were conducted under the Manpower Development and Training Act (MDTA) for a period of 52 weeks.…

The influence of emotional stimuli on attention orienting and inhibitory control in pediatric anxiety.

PubMed

Mueller, Sven C; Hardin, Michael G; Mogg, Karin; Benson, Valerie; Bradley, Brendan P; Reinholdt-Dunne, Marie Louise; Liversedge, Simon P; Pine, Daniel S; Ernst, Monique

2012-08-01

Anxiety disorders are highly prevalent in children and adolescents, and are associated with aberrant emotion-related attention orienting and inhibitory control. While recent studies conducted with high-trait anxious adults have employed novel emotion-modified antisaccade tasks to examine the influence of emotional information on orienting and inhibition, similar studies have yet to be conducted in youths. Participants were 22 children/adolescents diagnosed with an anxiety disorder, and 22 age-matched healthy comparison youths. Participants completed an emotion-modified antisaccade task that was similar to those used in studies of high-trait anxious adults. This task probed the influence of abruptly appearing neutral, happy, angry, or fear stimuli on orienting (prosaccade) or inhibitory (antisaccade) responses. Anxious compared to healthy children showed facilitated orienting toward angry stimuli. With respect to inhibitory processes, threat-related information improved antisaccade accuracy in healthy but not anxious youth. These findings were not linked to individual levels of reported anxiety or specific anxiety disorders. Findings suggest that anxious relative to healthy children manifest enhanced orienting toward threat-related stimuli. In addition, the current findings suggest that threat may modulate inhibitory control during adolescent development. © 2012 The Authors. Journal of Child Psychology and Psychiatry © 2012 Association for Child and Adolescent Mental Health.

The impact of goal setting and goal orientation on performance during a clerkship surgical skills training program.

PubMed

Gardner, Aimee K; Diesen, Diana L; Hogg, Deborah; Huerta, Sergio

2016-02-01

The purpose of this study was to integrate relevant goal-setting theory and to identify if trainees' goal orientations have an impact on the assigned goals-performance relationship. Trainees attended 1 of the 3 goal-training activities (do your best, performance, or learning goals) for knot tying (KT) and camera navigation (CN) during the 3rd-year clerkship rotation. Questionnaires and pretests and/or post-tests were completed. One twenty-seven 3rd-year medical students (age: 25 ± 2.6; 54% women) participated in the training program. Pretraining to post-training performance changes were significant for all groups on both tasks (P < .01), but the increase was significantly greater (P < .01) for the learning goals group (do your best: KTΔ = 2.14, CNΔ = 1.69; performance: KTΔ = 2.49, CNΔ = 2.24; learning: KTΔ = 3.04 CNΔ = 2.76). Correlations between goal orientations and improvement were examined, revealing a unique role of goal orientation for performance improvement. These data indicate that consideration of goal type and trainee goal orientation must be considered during curriculum development to maximize educational value. Copyright © 2016 Elsevier Inc. All rights reserved.

Exploring the influence of cultural orientations on assessment of communication behaviours during patient-practitioner interactions.

PubMed

Wilby, Kyle J; Govaerts, Marjan J B; Austin, Zubin; Dolmans, Diana H J M

2017-03-21

Research has shown that patients' and practitioners' cultural orientations affect communication behaviors and interpretations in cross-cultural patient-practitioner interactions. Little is known about the effect of cultural orientations on assessment of communication behaviors in cross-cultural educational settings. The purpose of this study is to explore cultural orientation as a potential source of assessor idiosyncrasy or between-assessor variability in assessment of communication skills. More specifically, we explored if and how (expert) assessors' valuing of communication behaviours aligned with their cultural orientations (power-distance, masculinity-femininity, uncertainty avoidance, and individualism-collectivism). Twenty-five pharmacist-assessors watched 3 videotaped scenarios (patient-pharmacist interactions) and ranked each on a 5-point global rating scale. Videotaped scenarios demonstrated combinations of well-portrayed and borderline examples of instrumental and affective communication behaviours. We used stimulated recall and verbal protocol analysis to investigate assessors' interpretations and evaluations of communication behaviours. Uttered assessments of communication behaviours were coded as instrumental (task-oriented) or affective (socioemotional) and either positive or negative. Cultural orientations were measured using the Individual Cultural Values Scale. Correlations between cultural orientations and global scores, and frequencies of positive, negative, and total utterances of instrumental and affective behaviours were determined. Correlations were found to be scenario specific. In videos with poor or good performance, no differences were found across cultural orientations. When borderline performance was demonstrated, high power-distance and masculinity were significantly associated with higher global ratings (r = .445, and .537 respectively, p < 0.05) as well as with fewer negative utterances regarding instrumental (task focused) behaviours (r = -.533 and - .529, respectively). Higher masculinity scores were furthermore associated with positive utterances of affective (socioemotional) behaviours (r = .441). Our findings thus confirm cultural orientation as a source of assessor idiosyncrasy and meaningful variations in interpretation of communication behaviours. Interestingly, expert assessors generally agreed on scenarios of good or poor performances but borderline performance was influenced by cultural orientation. Contrary to current practices of assessor and assessment instrument standardization, findings support the use of multiple assessors for patient-practitioner interactions and development of qualitative assessment tools to capture these varying, yet valid, interpretations of performance.

Is Posner's "beam" the same as Treisman's "glue"?: On the relation between visual orienting and feature integration theory.

PubMed

Briand, K A; Klein, R M

1987-05-01

In the present study we investigated whether the visually allocated "beam" studied by Posner and others is the same visual attentional resource that performs the role of feature integration in Treisman's model. Subjects were cued to attend to a certain spatial location by a visual cue, and performance at expected and unexpected stimulus locations was compared. Subjects searched for a target letter (R) with distractor letters that either could give rise to illusory conjunctions (PQ) or could not (PB). Results from three separate experiments showed that orienting attention in response to central cues (endogenous orienting) showed similar effects for both conjunction and feature search. However, when attention was oriented with peripheral visual cues (exogenous orienting), conjunction search showed larger effects of attention than did feature search. It is suggested that the attentional systems that are oriented in response to central and peripheral cues may not be the same and that only the latter performs a role in feature integration. Possibilities for future research are discussed.

Effect of orientation on electrically conducting thermoplastic composite properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Genetti, W.B.; Grady, B.P.

1996-10-01

Properties of electrically conducting composites made from low density polyethylene (LDPE), high density polyethylene (HDPE), and polypropylene (PP) filled with nickel flake are being studied as a function of nickel concentration and draw ratio. The effect on electrical conduction, crystallinity, melt temperature, tensile modulus, and elongation at break are being tested. The melt temperature increases with increasing nickel concentration. The electrical conduction increases slowly with increased nickel concentration to the percolation volume fraction, then increases sharply. Orientation by uniaxial stretching of the films should allow conductive pathways to form throughout the polymer more easily by forcing particles closer together, thusmore » reducing the percolation volume fraction. This process could be caused by both alignment of the polymer chains and by stress induced crystallization that forces the particles into smaller amorphous regions.« less

Computer simulation of thermal conductivity in vulcanized polyisoprene at variable strain and temperature

NASA Astrophysics Data System (ADS)

Engelmann, Sven; Meyer, Jan; Hentschke, Reinhard

2017-08-01

We study the thermal conductivity tensor in an atomistic model of vulcanized cis-1,4-polyisoprene (PI) rubber via molecular dynamics simulations. Our polymer force field is based on V. A. Harmandaris et al. [J. Chem. Phys. 116, 436 (2002), 10.1063/1.1416872], whereas the polymerization algorithm follows the description in J. Hager et al. [Macromolecules 48, 9039 (2015), 10.1021/acs.macromol.5b01864]. The polymer chains are chemically cross linked via sulfur bridges of adjustable cross-link density. A volume-conserving uniaxial strain of up to 200% is applied to the systems. The widely used GROMACS simulation package is adapted to allow using the Green-Kubo approach to calculate the thermal conductivity tensor components. Our analysis of the heat flux autocorrelation functions leads to the conclusion that the thermal conductivity in PI is governed by short-lived phonon modes at low wave numbers due to deformation of the monomers along the polymer backbone. Applying uniaxial strain causes increased orientation of monomers along the strain direction, which enhances the attendant thermal conductivity component. We find an exponential increase of the conductivity in stretch direction in terms of an attendant orientation order parameter. This is accompanied by a simultaneous decline of thermal conductivity in the orthogonal directions. Increase of the cross-link density only has a weak effect on thermal conductivity in the unstrained system, even at high cross-link density. In the strained system we do observed a rising thermal conductivity in the limit of high stress. This increase is attributed to enhanced coupling between chains rather than to their orientation.

Lightweight, Low-CTE Tubes Made From Biaxially Oriented LCPs

NASA Technical Reports Server (NTRS)

Rubin, Leslie; Federico, Frank; Formato, Richard; Larouco, John; Slager, William

2004-01-01

Tubes made from biaxially oriented liquid-crystal polymers (LCPs) have been developed for use as penetrations on cryogenic tanks. ( Penetrations in this context denotes feed lines, vent lines, and sensor tubes, all of which contribute to the undesired conduction of heat into the tanks.) In comparison with corresponding prior cryogenic-tank penetrations made from stainless steels and nickel alloys, the LCP penetrations offer advantages of less weight and less thermal conduction. An additional major advantage of LCP components is that one can tailor their coefficients of thermal expansion (CTEs). The estimated cost of continuous production of LCP tubes of typical sizes is about $1.27/ft ($4.17/m) [based on 1998 prices]. LCP tubes that are compatible with liquid oxygen and that feature tailored biaxial molecular orientation and quasi-isotropic properties (including quasi-isotropic CTE) have been fabricated by a combination of proprietary and patented techniques that involve the use of counterrotating dies (CRDs). Tailoring of the angle of molecular orientation is what makes it possible to tailor the CTE over a wide range to match the CTEs of adjacent penetrations of other tank components; this, in turn, makes it possible to minimize differential-thermal expansion stresses that arise during thermal cycling. The fabrication of biaxially oriented LCP tubes by use of CRDs is not new in itself. The novelty of the present development lies in tailoring the orientations and thus the CTEs and other mechanical properties of the LCPs for the intended cryogenic applications and in modifications of the CRDs for this purpose. The LCP tubes and the 304-stainless-steel tubes that the LCP tubes were intended to supplant were tested with respect to burst strength, permeability, thermal conductivity, and CTE.

When Goal Orientations Collide: Effects of Learning and Performance Orientation on Team Adaptability in Response to Workload Imbalance

ERIC Educational Resources Information Center

Porter, Christopher O. L. H.; Webb, Justin W.; Gogus, Celile Itir

2010-01-01

The authors draw on resource allocation theory (Kanfer & Ackerman, 1989) to develop hypotheses regarding the conditions under which collective learning and performance orientation have interactive effects and the nature of those effects on teams' ability to adapt to a sudden and dramatic change in workload. Consistent with the theory, results…

Queer in the field: on emotions, temporality, and performativity in ethnography.

PubMed

Rooke, Alison

2009-01-01

This article is a reflection on a year of ethnographic fieldwork conducted in and around a lesbian and gay community center in London. The research was concerned with the ways in which working class lesbian and bisexual women experience the meanings of their sexual identities on an everyday basis. I conducted participant observation in a variety of settings. Activities I took part in included volunteering at the center and running sexualities discussion groups, and photographic workshops with lesbian and bisexual women. In this article I explore the epistemological, ontological, and ethical dimensions of ethnographic research. I argue here that queer ethnography is not merely ethnography that has focus on researching queer lives, it is also a matter of taking queer theory seriously in order to question the conventions of ethnographic research, specifically the stability and coherence of the ethnographic self and performativity of the ethnographic self in writing and doing research. To queer ethnography then, is to bend the established orientation of ethnography in its method, ethics, and reflexive philosophical principles.

Local fields and effective conductivity tensor of ellipsoidal particle composite with anisotropic constituents

NASA Astrophysics Data System (ADS)

Kushch, Volodymyr I.; Sevostianov, Igor; Giraud, Albert

2017-11-01

An accurate semi-analytical solution of the conductivity problem for a composite with anisotropic matrix and arbitrarily oriented anisotropic ellipsoidal inhomogeneities has been obtained. The developed approach combines the superposition principle with the multipole expansion of perturbation fields of inhomogeneities in terms of ellipsoidal harmonics and reduces the boundary value problem to an infinite system of linear algebraic equations for the induced multipole moments of inhomogeneities. A complete full-field solution is obtained for the multi-particle models comprising inhomogeneities of diverse shape, size, orientation and properties which enables an adequate account for the microstructure parameters. The solution is valid for the general-type anisotropy of constituents and arbitrary orientation of the orthotropy axes. The effective conductivity tensor of the particulate composite with anisotropic constituents is evaluated in the framework of the generalized Maxwell homogenization scheme. Application of the developed method to composites with imperfect ellipsoidal interfaces is straightforward. Their incorporation yields probably the most general model of a composite that may be considered in the framework of analytical approach.

Skills for the literacy process.

PubMed

Côrrea, Kelli Cristina do Prado; Machado, Maria Aparecida Miranda de Paula; Hage, Simone Rocha de Vasconcellos

2018-03-01

Examine a set of competencies in children beginning the process of literacy and find whether there is positive correlation with their level of writing. Study conducted with 70 six-year-old students enrolled in the first year of Elementary School in municipal schools. The children were submitted to the Initial Reading and Writing Competence Assessment Battery (BACLE) and the Diagnostic Probing Protocol for classification of their level of writing. Descriptive statistical analysis and the Spearman coefficient were used for correlation between instruments. The students presented satisfactory performance in the tasks of the BACLE. Regarding the writing hypothesis, most children presented syllabic level with sound value. Significant positive correlation was observed between body scheme/time-space orientation and language skills. The group of schoolchildren performed satisfactorily on tests that measure pre-reading and writing skills. The areas of body scheme/time-space orientation and language presented significant correlation with the level of writing hypothesis, indicating that children with higher scores in these areas present better levels of writing. Identification of the necessary competencies for learning of reading and writing can provide teachers and educational audiology professionals with conditions for evaluation and early intervention in certain abilities for the development of reading and writing.

Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid

NASA Astrophysics Data System (ADS)

Ghosh, Subir; Choudhury, Dipankar; Roy, Taposh; Mamat, Azuddin Bin; Masjuki, H. H.; Pingguan-Murphy, Belinda

2015-06-01

Osteoarthritis-oriented synovial fluid (OASF), i.e., that typical of a patient with osteoarthritis, has different physical and biological characteristics than bovine serum (BS), a lubricant widely used in biotribological investigations. Micro-dimpled and diamond-like carbon- (DLC) coated surfaces are key emerging interfaces for orthopedic implants. In this study, tribological performances of dimpled surfaces, with and without DLC coating, have been investigated under both BS and OASF. The friction tests were performed utilizing a pin on a disk tribometer, whereas contact pressure, speed, and temperature were simulated to a ‘medium walking gait’ of hip joint conditions. The mechanical properties of the specimen and the physical properties of the lubricant were characterized before the friction test. Raman analysis was conducted to identify the coating condition both before and after the test. The DLC-coated dimpled surface showed maximum hardness and residual stress. A DLC-coated dimpled surface under an OASF lubricated condition yielded a lower friction coefficient and wear compared to those of plain and dimpled specimens. The higher graphitization of coated materials with increasing load was confirmed by Raman spectroscopy.

Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid

PubMed Central

Ghosh, Subir; Choudhury, Dipankar; Roy, Taposh; Bin Mamat, Azuddin; Masjuki, H H; Pingguan-Murphy, Belinda

2015-01-01

Osteoarthritis-oriented synovial fluid (OASF), i.e., that typical of a patient with osteoarthritis, has different physical and biological characteristics than bovine serum (BS), a lubricant widely used in biotribological investigations. Micro-dimpled and diamond-like carbon- (DLC) coated surfaces are key emerging interfaces for orthopedic implants. In this study, tribological performances of dimpled surfaces, with and without DLC coating, have been investigated under both BS and OASF. The friction tests were performed utilizing a pin on a disk tribometer, whereas contact pressure, speed, and temperature were simulated to a ‘medium walking gait’ of hip joint conditions. The mechanical properties of the specimen and the physical properties of the lubricant were characterized before the friction test. Raman analysis was conducted to identify the coating condition both before and after the test. The DLC-coated dimpled surface showed maximum hardness and residual stress. A DLC-coated dimpled surface under an OASF lubricated condition yielded a lower friction coefficient and wear compared to those of plain and dimpled specimens. The higher graphitization of coated materials with increasing load was confirmed by Raman spectroscopy. PMID:27877803

Rel8: demonstrating the feasibility of delivering an 8-week social skills program in a public mental health setting.

PubMed

Wauchope, Bronwyn; Terlich, Alissa; Lee, Stuart

2016-06-01

As community mental health services integrate recovery-oriented practices, treatments that focus on skills development and social integration are desirable. This study aimed to examine the feasibility of implementing "Rel8", an 8-week social skills training group adapted to suit a public community mental health setting. A retrospective audit was conducted of quantitative and qualitative data from four groups run between 2011 and 2013. Pre- and post-group measures were collected, assessing self-rated friendships and confidence with social skills and clinician-rated social skill performance. Qualitative feedback about group participation was also collected through use of a developed questionnaire. Analysis revealed significant improvements in participants' confidence with their social skills following group participation, with a trend also found for improved social skill performance. "Rel8", an adapted 8-week social skills training group, is a feasible program in the context of community mental health services. The program added to the recovery-centred practice of the community mental health service while also adding to the diversity of clinician skills for psychosocial-oriented practice. © The Royal Australian and New Zealand College of Psychiatrists 2015.

TiN-buffered substrates for photoelectrochemical measurements of oxynitride thin films

NASA Astrophysics Data System (ADS)

Pichler, Markus; Pergolesi, Daniele; Landsmann, Steve; Chawla, Vipin; Michler, Johann; Döbeli, Max; Wokaun, Alexander; Lippert, Thomas

2016-04-01

Developing novel materials for the conversion of solar to chemical energy is becoming an increasingly important endeavour. Perovskite compounds based on bandgap tunable oxynitrides represent an exciting class of novel photoactive materials. To date, literature mostly focuses on the characterization of oxynitride powder samples which have undeniable technological interest but do not allow the investigation of fundamental properties such as the role of the crystalline quality and/or the surface crystallographic orientation toward photo-catalytic activity. The challenge of growing high quality oxynitride thin films arises from the availability of a suitable substrate, owing to strict material and processing requirements: effective lattice matching, sufficiently high conductivities, stability under high temperatures and in strongly reducing environments. Here, we have established the foundations of a model system incorporating a TiN-buffer layer which enables fundamental investigations into crystallographic surface orientation and crystalline quality of the photocatalyst against photo(electro)chemical performance to be effectively performed. Furthermore, we find that TiN as current collector enables control over the nitrogen content of oxynitride thin films produced by a modified pulsed laser deposition method and allows the growth of highly ordered LaTiO3-xNx thin films.

Alterations to the orientation of the ground reaction force vector affect sprint acceleration performance in team sports athletes.

PubMed

Bezodis, Neil E; North, Jamie S; Razavet, Jane L

2017-09-01

A more horizontally oriented ground reaction force vector is related to higher levels of sprint acceleration performance across a range of athletes. However, the effects of acute experimental alterations to the force vector orientation within athletes are unknown. Fifteen male team sports athletes completed maximal effort 10-m accelerations in three conditions following different verbal instructions intended to manipulate the force vector orientation. Ground reaction forces (GRFs) were collected from the step nearest 5-m and stance leg kinematics at touchdown were also analysed to understand specific kinematic features of touchdown technique which may influence the consequent force vector orientation. Magnitude-based inferences were used to compare findings between conditions. There was a likely more horizontally oriented ground reaction force vector and a likely lower peak vertical force in the control condition compared with the experimental conditions. 10-m sprint time was very likely quickest in the control condition which confirmed the importance of force vector orientation for acceleration performance on a within-athlete basis. The stance leg kinematics revealed that a more horizontally oriented force vector during stance was preceded at touchdown by a likely more dorsiflexed ankle, a likely more flexed knee, and a possibly or likely greater hip extension velocity.

Cardinal rules: Visual orientation perception reflects knowledge of environmental statistics

PubMed Central

Girshick, Ahna R.; Landy, Michael S.; Simoncelli, Eero P.

2011-01-01

Humans are remarkably good at performing visual tasks, but experimental measurements reveal substantial biases in the perception of basic visual attributes. An appealing hypothesis is that these biases arise through a process of statistical inference, in which information from noisy measurements is fused with a probabilistic model of the environment. But such inference is optimal only if the observer’s internal model matches the environment. Here, we provide evidence that this is the case. We measured performance in an orientation-estimation task, demonstrating the well-known fact that orientation judgements are more accurate at cardinal (horizontal and vertical) orientations, along with a new observation that judgements made under conditions of uncertainty are strongly biased toward cardinal orientations. We estimate observers’ internal models for orientation and find that they match the local orientation distribution measured in photographs. We also show how a neural population could embed probabilistic information responsible for such biases. PMID:21642976

Real-time detection with AdaBoost-svm combination in various face orientation

NASA Astrophysics Data System (ADS)

Fhonna, R. P.; Nasution, M. K. M.; Tulus

2018-03-01

Most of the research has used algorithm AdaBoost-SVM for face detection. However, to our knowledge so far there is no research has been facing detection on real-time data with various orientations using the combination of AdaBoost and Support Vector Machine (SVM). Characteristics of complex and diverse face variations and real-time data in various orientations, and with a very complex application will slow down the performance of the face detection system this becomes a challenge in this research. Face orientation performed on the detection system, that is 900, 450, 00, -450, and -900. This combination method is expected to be an effective and efficient solution in various face orientations. The results showed that the highest average detection rate is on the face detection oriented 00 and the lowest detection rate is in the face orientation 900.

Localized Dictionaries Based Orientation Field Estimation for Latent Fingerprints.

PubMed

Xiao Yang; Jianjiang Feng; Jie Zhou

2014-05-01

Dictionary based orientation field estimation approach has shown promising performance for latent fingerprints. In this paper, we seek to exploit stronger prior knowledge of fingerprints in order to further improve the performance. Realizing that ridge orientations at different locations of fingerprints have different characteristics, we propose a localized dictionaries-based orientation field estimation algorithm, in which noisy orientation patch at a location output by a local estimation approach is replaced by real orientation patch in the local dictionary at the same location. The precondition of applying localized dictionaries is that the pose of the latent fingerprint needs to be estimated. We propose a Hough transform-based fingerprint pose estimation algorithm, in which the predictions about fingerprint pose made by all orientation patches in the latent fingerprint are accumulated. Experimental results on challenging latent fingerprint datasets show the proposed method outperforms previous ones markedly.

Anisotropic Dye Adsorption and Anhydrous Proton Conductivity in Smectic Liquid Crystal Networks: The Role of Cross-Link Density, Order, and Orientation.

PubMed

Liang, Ting; van Kuringen, Huub P C; Mulder, Dirk J; Tan, Shuai; Wu, Yong; Borneman, Zandrie; Nijmeijer, Kitty; Schenning, Albertus P H J

2017-10-11

In this work, the decisive role of rigidity, orientation, and order in the smectic liquid crystalline network on the anisotropic proton and adsorbent properties is reported. The rigidity in the hydrogen-bonded polymer network has been altered by changing the cross-link density, the order by using different mesophases (smectic, nematic, and isotropic phases), whereas the orientation of the mesogens was controlled by alignment layers. Adding more cross-linkers improved the integrity of the polymer films. For the proton conduction, an optimum was found in the amount of cross-linker and the smectic organization results in the highest anhydrous proton conduction. The polymer films show anisotropic proton conductivity with a 54 times higher conductivity in the direction perpendicular to the molecular director. After a base treatment of the smectic liquid crystalline network, a nanoporous polymer film is obtained that also shows anisotropic adsorption of dye molecules and again straight smectic pores are favored over disordered pores in nematic and isotropic networks. The highly cross-linked films show size-selective adsorption of dyes. Low cross-linked materials do not show this difference due to swelling, which decreases the order and creates openings in the two-dimensional polymer layers. The latter is, however, beneficial for fast adsorption kinetics.

48 CFR 752.7011 - Orientation and language training.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Orientation and language....7011 Orientation and language training. For use in all USAID cost-reimbursement contracts involving performance overseas. Orientation and Language Training (APR 1984) (a) Regular employees shall receive a...

The Role of the Conductor's Goal Orientation and Use of Shared Performance Cues on Collegiate Instrumentalists' Motivational Beliefs and Performance in Large Musical Ensembles

ERIC Educational Resources Information Center

Matthews, Wendy K.; Kitsantas, Anastasia

2013-01-01

This study examined the effects of the conductor's goal orientation (mastery vs. performance) and use of shared performance cues (basic vs. interpretive vs. expressive) on instrumentalists' self-efficacy, collective efficacy, attributions, and performance. Eighty-one college instrumentalists from two musical ensembles participated in the study. It…

The Performance Blueprint: An Integrated Logic Model Developed To Enhance Performance Measurement Literacy: The Case of Performance-Based Contract Management.

ERIC Educational Resources Information Center

Longo, Paul J.

This study explored the mechanics of using an enhanced, comprehensive multipurpose logic model, the Performance Blueprint, as a means of building evaluation capacity, referred to in this paper as performance measurement literacy, to facilitate the attainment of both service-delivery oriented and community-oriented outcomes. The application of this…

Performance-oriented: toward a successful strategy.

PubMed

Kumar, K; Subramanian, R; Yauger, C

1997-01-01

Changes in the health care industry have profoundly affected hospital management and have caused severe declines in hospital profitability. In 1993, Health Care Management Review reported that the average operating profit margin, around 2% in 1984, had declined to a 0.2% loss by 1990. In the past, hospitals were buffered by entry regulations and cost reimbursement; thus, they rarely dealt with traditional market pressures. But the changed terrain means that competitive factors now underscore all strategic decisions. This study examines the strategic significance of market orientation in the health care industry. The authors identified forms of market orientation by emphasizing different components, and discovered that hospitals fell into four distinct clusters or groups. They also found a critical relationship between market orientation and performance scores on a number of criteria. Finally, the authors suggest that different forms of market orientation should be employed to target specific performance measures.

The effects of sexual orientation on state legislators' behavior and priorities.

PubMed

Herrick, Rebekah

2009-01-01

This article explores whether sexual orientation, surrogate representation, and political factors affect legislators' work on gay, lesbian, and bisexual (GLB) interests, and whether the latter explains away the influence of sexual orientation. A survey of openly GLB state legislators and their colleagues was conducted to measure legislators' campaign issues, legislative priorities, surrogate representation, and ambition. This information is supplemented with bill introduction and district data. The results indicate that legislators' sexual orientation strongly influences their work on GLB issues and although surrogate representation and electoral considerations also affect GLB work, they do not explain away the importance of sexual orientation. The implications of this for the relationship between descriptive and substantive representation are explored.

Skylab food system laboratory support

NASA Technical Reports Server (NTRS)

Sanford, D.

1974-01-01

A summary of support activities performed to ensure the quality and reliability of the Skylab food system design is reported. The qualification test program was conducted to verify crew compartment compatibility, and to certify compliance of the food system with nutrition, preparation, and container requirements. Preflight storage requirements and handling procedures were also determined. Information on Skylab food items was compiled including matters pertaining to serving size, preparation information, and mineral, calorie, and protein content. Accessory hardware and the engraving of food utensils were also considered, and a stowage and orientation list was constructed which takes into account menu use sequences, menu items, and hardware stowage restrictions. A food inventory system was established and food thermal storage tests were conducted. Problems and comments pertaining to specific food items carried onboard the Skylab Workshop were compiled.

Feasibility of intercalated graphite railgun armatures

NASA Technical Reports Server (NTRS)

Gaier, James R.; Gooden, Clarence E.; Yashan, Doreen; Naud, Steven

1990-01-01

Graphite intercalation compounds may provide an excellent material for the fabrication of electro-magnetic railgun armatures. As a pulse of power is fed into the armature the intercalate could be excited into the plasma state around the edges of the armature, while the bulk of the current would be carried through the graphite block. Such an armature would have the desirable characteristics of both diffuse plasma armatures and bulk conduction armatures. In addition, the highly anisotropic nature of these materials could enable the electrical and thermal conductivity to be tailored to meet the specific requirements of electromagnetic railgun armatures. Preliminary investigations were performed in an attempt to determine the feasibility of using graphite intercalation compounds as railgun armatures. Issues of fabrication, resistivity, stability, and electrical current spreading are addressed for the case of highly oriented pyrolytic graphite.

Tactile orientation perception: an ideal observer analysis of human psychophysical performance in relation to macaque area 3b receptive fields

PubMed Central

Peters, Ryan M.; Staibano, Phillip

2015-01-01

The ability to resolve the orientation of edges is crucial to daily tactile and sensorimotor function, yet the means by which edge perception occurs is not well understood. Primate cortical area 3b neurons have diverse receptive field (RF) spatial structures that may participate in edge orientation perception. We evaluated five candidate RF models for macaque area 3b neurons, previously recorded while an oriented bar contacted the monkey's fingertip. We used a Bayesian classifier to assign each neuron a best-fit RF structure. We generated predictions for human performance by implementing an ideal observer that optimally decoded stimulus-evoked spike counts in the model neurons. The ideal observer predicted a saturating reduction in bar orientation discrimination threshold with increasing bar length. We tested 24 humans on an automated, precision-controlled bar orientation discrimination task and observed performance consistent with that predicted. We next queried the ideal observer to discover the RF structure and number of cortical neurons that best matched each participant's performance. Human perception was matched with a median of 24 model neurons firing throughout a 1-s period. The 10 lowest-performing participants were fit with RFs lacking inhibitory sidebands, whereas 12 of the 14 higher-performing participants were fit with RFs containing inhibitory sidebands. Participants whose discrimination improved as bar length increased to 10 mm were fit with longer RFs; those who performed well on the 2-mm bar, with narrower RFs. These results suggest plausible RF features and computational strategies underlying tactile spatial perception and may have implications for perceptual learning. PMID:26354318

Orientation dependence of temporal and spectral properties of high-order harmonics in solids [Orientation dependence of high-harmonic temporal and spectral properties in solids

DOE PAGES

Wu, Mengxi; You, Yongsing; Ghimire, Shambhu; ...

2017-12-18

We investigate the connection between crystal symmetry and temporal and spectral properties of high-order harmonics in solids. We calculate the orientation-dependent harmonic spectrum driven by an intense, linearly polarized infrared laser field, using a momentum-space description of the generation process in terms of strong-field-driven electron dynamics on the band structure. We show that the orientation dependence of both the spectral yield and the subcycle time profile of the harmonic radiation can be understood in terms of the coupling strengths and relative curvatures of the valence band and the low-lying conduction bands. In particular, we show that in some systems thismore » gives rise to a rapid shift of a quarter optical cycle in the timing of harmonics in the secondary plateau as the crystal is rotated relative to the laser polarization. Here, we address recent experimental results in MgO and show that the observed change in orientation dependence for the highest harmonics can be interpreted in the momentum space picture in terms of the contributions of several different conduction bands.« less

Orientation dependence of temporal and spectral properties of high-order harmonics in solids [Orientation dependence of high-harmonic temporal and spectral properties in solids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Mengxi; You, Yongsing; Ghimire, Shambhu

We investigate the connection between crystal symmetry and temporal and spectral properties of high-order harmonics in solids. We calculate the orientation-dependent harmonic spectrum driven by an intense, linearly polarized infrared laser field, using a momentum-space description of the generation process in terms of strong-field-driven electron dynamics on the band structure. We show that the orientation dependence of both the spectral yield and the subcycle time profile of the harmonic radiation can be understood in terms of the coupling strengths and relative curvatures of the valence band and the low-lying conduction bands. In particular, we show that in some systems thismore » gives rise to a rapid shift of a quarter optical cycle in the timing of harmonics in the secondary plateau as the crystal is rotated relative to the laser polarization. Here, we address recent experimental results in MgO and show that the observed change in orientation dependence for the highest harmonics can be interpreted in the momentum space picture in terms of the contributions of several different conduction bands.« less

Surface Charge Effects on the Electro-Orientation of Insulating Nanotubes in Aqueous Electrolytes

NASA Astrophysics Data System (ADS)

Cetindag, Semih; Tiwari, Bishnu; Zhang, Dongyan; Yap, Yoke Khin; Kim, Sangil; Shan, Jerry W.

2017-11-01

While the alignment of electrically conductive nanowires and nanotubes by electric fields in liquid solution has been well studied, much less is known about the electro-orientation of insulating 1D particles, such as boron-nitride nanotubes (BNNTs). Here, we demonstrate for the first time the electro-orientation of individual insulating BNNTs in aqueous KCl solutions under AC fields. Comparison to theory indicates that the observed frequency response is not related to the crossover for Maxwell-Wagner interfacial polarization. Instead, the cross-over frequency in the low-frequency regime scales as the square root of solution conductivity, indicating that alignment is associated with the formation and motion of an electrical double layer (EDL), much like induced-charge electro-osmosis for a conducting particle. However, the mechanism for the formation of the EDL is presumably different for insulating particles like BNNTs as compared to conductors. By varying the surface charge of the particle by changing pH, we show that the alignment rate increases with increasing surface charge, and is likely a result of counter-ion migration and EDL polarization under the influence of applied electric field. Thus, particle surface charge (large Dukhin number) is believed to play a vital role in the electro-orientation of insulating particles in aqueous solutions. NSF CBET-1604931 and NSF DMR-1261910.

Surveying the orientation learning needs of clinical nursing instructors.

PubMed

Davidson, Kathleen M; Rourke, Liam

2012-02-17

The purpose of this study was to describe the knowledge and skills nurses need to be successful clinical instructors. A formal learning needs assessment was conducted to measure the orientation learning needs of new part-time clinical nursing faculty at one university. An existing, validated learning needs instrument was modified and administered online. The respondents (n=44; 16.6%) unanimously identified five essential learning needs for nursing clinical instructors, thus providing sound justification upon which to base an instructor orientation program. From these results, essential content for an orientation workshop to be followed by an online orientation course is outlined. Future research is needed to evaluate the outcomes of clinical instructor orientation; that is, whether participants have acquired the knowledge and skills needed to competently facilitate student learning in the clinical setting.

The individual-oriented and social-oriented Chinese bicultural self: testing the theory.

PubMed

Lu, Luo

2008-06-01

The author proposes a bicultural self theory for contemporary Chinese individuals, encompassing 2 main components: the individual-oriented self and the social-oriented self. The social orientation is rooted in traditional Chinese conceptualization of the self, whereas the individual orientation has evolved and developed under Western influences along with recent societal modernization. The author conducted a series of 5 studies to test the theory and relate the model to important issues in current personality and social psychological research, such as cultural individualism-collectivism, self-construals, motivation, cognition, emotion, and well-being. A total of 977 university students in Taiwan participated. The author found that contrasting self-aspects were differentially associated with the aforementioned constructs, as theoretically predicted. This evidence thus generally supported the bicultural self model.

Data article on disposition towards enhancing SMEs' performance through entrepreneurial orientations: Perspectives from a developing economy.

PubMed

Ibidunni, Ayodotun Stephen; Ibidunni, Oyebisi Mary; Olokundun, Maxwell Ayodele; Falola, Hezekiah Olubusayo; Salau, Odunayo Paul; Borishade, Taiye Tairat

2018-06-01

This article present data on the disposition of SME operators towards enhancing SMEs Performance through entrepreneurial orientations. Copies of structured questionnaire were administered to 102 SME owners/managers. Using descriptive and standard multiple regression statistical analysis, the data described how proactiveness, risk-taking and autonomy orientations significantly influenced SMEs' profitability, sales growth, customer satisfaction and new product success.

Processing-microstructure relationships in thermotropic liquid crystalline polymers: Experimental and numerical modeling studies

NASA Astrophysics Data System (ADS)

Fang, Jun

Thermotropic liquid crystalline polymers (TLCPs) are a class of promising engineering materials for high-demanding structural applications. Their excellent mechanical properties are highly correlated to the underlying molecular orientation states, which may be affected by complex flow fields during melt processing. Thus, understanding and eventually predicting how processing flows impact molecular orientation is a critical step towards rational design work in order to achieve favorable, balanced physical properties in finished products. This thesis aims to develop deeper understanding of orientation development in commercial TLCPs during processing by coordinating extensive experimental measurements with numerical computations. In situ measurements of orientation development of LCPs during processing are a focal point of this thesis. An x-ray capable injection molding apparatus is enhanced and utilized for time-resolved measurements of orientation development in multiple commercial TLCPs during injection molding. Ex situ wide angle x-ray scattering is also employed for more thorough characterization of molecular orientation distributions in molded plaques. Incompletely injection molded plaques ("short shots") are studied to gain further insights into the intermediate orientation states during mold filling. Finally, two surface orientation characterization techniques, near edge x-ray absorption fine structure (NEXAFS) and infrared attenuated total reflectance (FTIR-ATR) are combined to investigate the surface orientation distribution of injection molded plaques. Surface orientation states are found to be vastly different from their bulk counterparts due to different kinematics involved in mold filling. In general, complex distributions of orientation in molded plaques reflect the spatially varying competition between shear and extension during mold filling. To complement these experimental measurements, numerical calculations based on the Larson-Doi polydomain model are performed. The implementation of the Larson-Doi in complex processing flows is performed using a commercial process modeling software suite (MOLDFLOWRTM), exploiting a nearly exact analogy between the Larson-Doi model and a fiber orientation model that has been widely used in composites processing simulations. The modeling scheme is first verified by predicting many qualitative and quantitative features of molecular orientation distributions in isothermal extrusion-fed channel flows. In coordination with experiments, the model predictions are found to capture many qualitative features observed in injection molded plaques (including short shots). The final, stringent test of Larson-Doi model performance is prediction of in situ transient orientation data collected during mold filling. The model yields satisfactory results, though certain numerical approximations limit performance near the mold front.

The effects of temperature on service employees' customer orientation: an experimental approach.

PubMed

Kolb, Peter; Gockel, Christine; Werth, Lioba

2012-01-01

Numerous studies have demonstrated how temperature can affect perceptual, cognitive and psychomotor performance (e.g. Hancock, P.A., Ross, J., and Szalma, J., 2007. A meta-analysis of performance response under thermal stressors. Human Factors: The Journal of the Human Factors and Ergonomics Society, 49 (5), 851-877). We extend this research to interpersonal aspects of performance, namely service employees' and salespeople's customer orientation. We combine ergonomics with recent research on social cognition linking physical with interpersonal warmth/coldness. In Experiment 1, a scenario study in the lab, we demonstrate that student participants in rooms with a low temperature showed more customer-oriented behaviour and gave higher customer discounts than participants in rooms with a high temperature - even in zones of thermal comfort. In Experiment 2, we show the existence of alternative possibilities to evoke positive temperature effects on customer orientation in a sample of 126 service and sales employees using a semantic priming procedure. Overall, our results confirm the existence of temperature effects on customer orientation. Furthermore, important implications for services, retail and other settings of interpersonal interactions are discussed. Practitioner Summary: Temperature effects on performance have emerged as a vital research topic. Owing to services' increasing economic importance, we transferred this research to the construct of customer orientation, focusing on performance in service and retail settings. The demonstrated temperature effects are transferable to services, retail and other settings of interpersonal interactions.

Thin film with oriented cracks on a flexible substrate

DOEpatents

Feng, Bao; McGilvray, Andrew; Shi, Bo

2010-07-27

A thermoelectric film is disclosed. The thermoelectric film includes a substrate that is substantially electrically non-conductive and flexible and a thermoelectric material that is deposited on at least one surface of the substrate. The thermoelectric film also includes multiple cracks oriented in a predetermined direction.

Edge-Related Activity Is Not Necessary to Explain Orientation Decoding in Human Visual Cortex.

PubMed

Wardle, Susan G; Ritchie, J Brendan; Seymour, Kiley; Carlson, Thomas A

2017-02-01

Multivariate pattern analysis is a powerful technique; however, a significant theoretical limitation in neuroscience is the ambiguity in interpreting the source of decodable information used by classifiers. This is exemplified by the continued controversy over the source of orientation decoding from fMRI responses in human V1. Recently Carlson (2014) identified a potential source of decodable information by modeling voxel responses based on the Hubel and Wiesel (1972) ice-cube model of visual cortex. The model revealed that activity associated with the edges of gratings covaries with orientation and could potentially be used to discriminate orientation. Here we empirically evaluate whether "edge-related activity" underlies orientation decoding from patterns of BOLD response in human V1. First, we systematically mapped classifier performance as a function of stimulus location using population receptive field modeling to isolate each voxel's overlap with a large annular grating stimulus. Orientation was decodable across the stimulus; however, peak decoding performance occurred for voxels with receptive fields closer to the fovea and overlapping with the inner edge. Critically, we did not observe the expected second peak in decoding performance at the outer stimulus edge as predicted by the edge account. Second, we evaluated whether voxels that contribute most to classifier performance have receptive fields that cluster in cortical regions corresponding to the retinotopic location of the stimulus edge. Instead, we find the distribution of highly weighted voxels to be approximately random, with a modest bias toward more foveal voxels. Our results demonstrate that edge-related activity is likely not necessary for orientation decoding. A significant theoretical limitation of multivariate pattern analysis in neuroscience is the ambiguity in interpreting the source of decodable information used by classifiers. For example, orientation can be decoded from BOLD activation patterns in human V1, even though orientation columns are at a finer spatial scale than 3T fMRI. Consequently, the source of decodable information remains controversial. Here we test the proposal that information related to the stimulus edges underlies orientation decoding. We map voxel population receptive fields in V1 and evaluate orientation decoding performance as a function of stimulus location in retinotopic cortex. We find orientation is decodable from voxels whose receptive fields do not overlap with the stimulus edges, suggesting edge-related activity does not substantially drive orientation decoding. Copyright © 2017 the authors 0270-6474/17/371187-10$15.00/0.

[Change in the event-related skin conductivity: an indicator of the immediate importance of elaborate information processing?].

PubMed

Zimmer, H

1992-01-01

In recent psychophysiological conceptualizations of the orienting response (OR) within the framework of information processing, the OR is increasingly considered a "call for processing resources", something which is especially inferred from variations in the event-related skin conductance response (SCR). The present study, therefore, was concerned with certain implications arising from this framework or perspective, particularly in regard to the question of whether stimuli eliciting skin conductance responses obligatorily receive/evoke processing priority or not. In order to examine whether these electrodermal responses denote a capturing of attention or merely a call for processing resources, short (1 s) pure sine tones of 65 dB with sudden onset (commonly used as orienting stimuli) were inserted in a reaction time paradigm with an additional memory load. This demand was primarily given because memory processes play a key role in theories of orienting and habituation. The task was run under two different conditions of complexity, factorially combined with a novelty variation of the added auditory stimuli. The results revealed a substantial deterioration of task performance subsequent to the occurrence of the tones, which, however, was dependent on task complexity and on novelty of the tones. The task impairment is particularly remarkable as subjects were asked to avoid distractions by paying attention to the task and as the tones were introduced as subsidiary and task-irrelevant. Together with the missing effects of task complexity on phasic and tonic electrodermal activity, results suggest that information-processing conceptualizations of the OR can only be a meaningful heuristic contribution to theoretical developments about human orienting and its habituation if the setting of processing priority, its conditions, as well as its implications are adequately taken into account. In addition, it seems to be promising to consider the strength of the SCR as an index of urgency of elaborate, attention-demanding processing and not as a peripheral physiological manifestation of the OR, or, respectively, of a call for unspecific processing resources. Such a view would also do justice to the aspect of prioritization. The sufficient conditions for an OR's occurrence could, in this context, be equated with, among others, some of those which activate a mechanism subserving selective attention and, as a possible result, which lead to further and more elaborate processing of potentially important information.

College Students' Physical Activity and Health-Related Quality of Life: An Achievement Goal Perspective.

PubMed

Zhang, Tao; Xiang, Ping; Gu, Xiangli; Rose, Melanie

2016-06-01

The 2 × 2 achievement goal model, including the mastery-approach, mastery-avoidance, performance-approach, and performance-avoidance goal orientations, has recently been used to explain motivational outcomes in physical activity. This study attempted to examine the relationships among 2 × 2 achievement goal orientations, physical activity, and health-related quality of life (HRQOL) in college students. Participants were 325 students (130 men and 195 women; Mage = 21.4 years) enrolled in physical activity classes at a Southern university. They completed surveys validated in previous research assessing achievement goal orientations, physical activity, and HRQOL. Path analyses revealed a good fit between the model and data (root mean square error of approximation = .06; Comparative Fit Index = .99; Bentler-Bonett Nonnormed Fit Index = .98; Incremental Fit Index = .99), but the model explained small variances in the current study. Mastery-approach and performance-approach goal orientations only had low or no relationships with physical activity. Mastery-approach goal orientation and physical activity also had low positive relationships with HRQOL, but mastery-avoidance and performance-avoidance goal orientations had low negative relationships with HRQOL. The hypothesized mediational role of physical activity in the relationship between mastery-approach and performance-approach goal orientations and HRQOL was not supported in this study. Although the data fit the proposed model well, only small variance was explained by the model. The relationship between physical activity and HRQOL of the college students and other related correlates should be further studied.

Pressure sensor using liquid crystals

NASA Technical Reports Server (NTRS)

Parmar, Devendra S. (Inventor); Holmes, Harlan K. (Inventor)

1994-01-01

A pressure sensor includes a liquid crystal positioned between transparent, electrically conductive films (18 and 20), that are biased by a voltage (V) which induces an electric field (E) that causes the liquid crystal to assume a first state of orientation. Application of pressure (P) to a flexible, transparent film (24) causes the conductive film (20) to move closer to or farther from the conductive film (18), thereby causing a change in the electric field (E'(P)) which causes the liquid crystal to assume a second state of orientation. Polarized light (P.sub.1) is directed into the liquid crystal and transmitted or reflected to an analyzer (A or 30). Changes in the state of orientation of the liquid crystal induced by applied pressure (P) result in a different light intensity being detected at the analyzer (A or 30) as a function of the applied pressure (P). In particular embodiments, the liquid crystal is present as droplets (10) in a polymer matrix (12) or in cells (14) in a polymeric or dielectric grid (16) material in the form of a layer (13) between the electrically conductive films (18 and 20). The liquid crystal fills the open wells in the polymer matrix (12) or grid (16) only partially.

Orientations of dendritic growth during solidification

NASA Astrophysics Data System (ADS)

Lee, Dong Nyung

2017-03-01

Dendrites are crystalline forms which grow far from the limit of stability of the plane front and adopt an orientation which is as close as possible to the heat flux direction. Dendritic growth orientations for cubic metals, bct Sn, and hcp Zn, can be controlled by thermal conductivity, Young's modulus, and surface energy. The control factors have been elaborated. Since the dendrite is a single crystal, its properties such as thermal conductivity that influences the heat flux direction, the minimum Young's modulus direction that influences the strain energy minimization, and the minimum surface energy plane that influences the crystal/liquid interface energy minimization have been proved to control the dendritic growth direction. The dendritic growth directions of cubic metals are determined by the minimum Young's modulus direction and/or axis direction of symmetry of the minimum crystal surface energy plane. The dendritic growth direction of bct Sn is determined by its maximum thermal conductivity direction and the minimum surface energy plane normal direction. The primary dendritic growth direction of hcp Zn is determined by its maximum thermal conductivity direction and the minimum surface energy plane normal direction and the secondary dendrite arm direction of hcp Zn is normal to the primary dendritic growth direction.

The Impact of Market Orientation on Patient Safety Climate Among Hospital Nurses.

PubMed

Weng, Rhay-Hung; Chen, Jung-Chien; Pong, Li-Jung; Chen, Li-Mei; Lin, Tzu-Chi

2016-03-01

Improving market orientation and patient safety have become the key concerns of nursing management. For nurses, establishing a patient safety climate is the key to enhancing nursing quality. This study explores how market orientation affects the climate of patient safety among hospital nurses. We proposed adopting a cross-sectional research design and using questionnaires to collect responses from nurses working in two Taiwanese hospitals. Three-hundred and forty-three valid samples were obtained. Multiple regression and path analyses were conducted to test the study. Market orientation was defined as the combination of customer orientation, competitor orientation, and interfunctional coordination. Customer orientation directly affects the climate of patient safety. Although the findings only supported Hypothesis 1, competitor orientation and interfunctional coordination positively affected the patient safety climate through the mediating effects of hospital support for staff. Health care managers could encourage nurses to adopt customer-oriented perspectives to enhance their nursing care. In addition, to enhance competitor orientation, interfunctional coordination, and the patient safety climate, hospital managers could strengthen their support for staff members. © The Author(s) 2014.

The Strength of the Relation between Performance-Approach and Performance-Avoidance Goal Orientations: Theoretical, Methodological, and Instructional Implications

ERIC Educational Resources Information Center

Linnenbrink-Garcia, Lisa; Middleton, Michael J.; Ciani, Keith D.; Easter, Matthew A.; O'Keefe, Paul A.; Zusho, Akane

2012-01-01

In current research on achievement goal theory, most researchers differentiate between performance-approach and performance-avoidance goal orientations. Evidence from prior research and from several previously published data sets is used to highlight that the correlation is often rather large, with a number of studies reporting correlations above…

High-performance parallel analysis of coupled problems for aircraft propulsion

NASA Technical Reports Server (NTRS)

Felippa, C. A.; Farhat, C.; Lanteri, S.; Gumaste, U.; Ronaghi, M.

1994-01-01

Applications are described of high-performance parallel, computation for the analysis of complete jet engines, considering its multi-discipline coupled problem. The coupled problem involves interaction of structures with gas dynamics, heat conduction and heat transfer in aircraft engines. The methodology issues addressed include: consistent discrete formulation of coupled problems with emphasis on coupling phenomena; effect of partitioning strategies, augmentation and temporal solution procedures; sensitivity of response to problem parameters; and methods for interfacing multiscale discretizations in different single fields. The computer implementation issues addressed include: parallel treatment of coupled systems; domain decomposition and mesh partitioning strategies; data representation in object-oriented form and mapping to hardware driven representation, and tradeoff studies between partitioning schemes and fully coupled treatment.

Measuring the Recovery Orientation of ACT

PubMed Central

Salyers, Michelle P.; Stull, Laura G.; Rollins, Angela L.; McGrew, John H.; Hicks, Lia J.; Thomas, Dave; Strieter, Doug

2014-01-01

Background Approaches to measuring recovery orientation are needed, particularly for programs that may struggle with implementing recovery-oriented treatment. Objective A mixed methods comparative study was conducted to explore effective approaches to measuring recovery orientation of Assertive Community Treatment (ACT) teams. Design Two ACT teams exhibiting high and low recovery orientation were compared using surveys, treatment plan ratings, diaries of treatment visits, and team-leader-reported treatment control mechanisms. Results The recovery-oriented team differed on one survey measure (higher expectations for consumer recovery), treatment planning (greater consumer involvement and goal-directed content), and use of control mechanisms (less use of representative payee, agency-held lease, daily medication delivery, and family involvement). Staff and consumer diaries showed the most consistent differences (e.g., conveying hope and choice) and were the least susceptible to observer bias, but had the lowest response rates. Conclusions Several practices differentiate recovery orientation on ACT teams, and a mixed-methods assessment approach is feasible. PMID:23690285

The nature of an object-oriented program: How do practitioners understand the nature of what they are creating?

NASA Astrophysics Data System (ADS)

Thompson, Errol; Kinshuk

2011-09-01

Object-oriented programming is seen as a difficult skill to master. There is considerable debate about the most appropriate way to introduce novice programmers to object-oriented concepts. Is it possible to uncover what the critical aspects or features are that enhance the learning of object-oriented programming? Practitioners have differing understandings of the nature of an object-oriented program. Uncovering these different ways of understanding leads to agreater understanding of the critical aspects and their relationship tothe structure of the program produced. A phenomenographic studywas conducted to uncover practitioner understandings of the nature of an object-oriented program. The study identified five levels of understanding and three dimensions of variation within these levels. These levels and dimensions of variation provide a framework for fostering conceptual change with respect to the nature of an object-oriented program.

Recovery orientation of treatment, consumer empowerment, and satisfaction with services: a mediational model.

PubMed

Barrett, Blake; Young, M Scott; Teague, Gregory B; Winarski, James T; Moore, Kathleen A; Ochshorn, Ezra

2010-01-01

This study explores the relationship between the recovery orientation of treatment and subjective experiences of consumer empowerment and satisfaction with services for individuals with severe and persistent mental illness. Instruments measuring perceptions of empowerment, recovery orientation of treatment, and satisfaction with services were administered to 45 participants enrolled in two demographically similar mental health treatment programs in Tampa, Florida - a community mental health center and an Assertive Community Treatment team. Analyses were conducted according to traditional mediation models. Empowerment was expected to mediate the relationship between the recovery orientation of treatment and consumer satisfaction with services. A recovery-based treatment orientation significantly predicted both consumer empowerment and satisfaction with services. Empowerment mediated the relationship between treatment orientation and consumer satisfaction. These preliminary findings highlight the impact of the recovery orientation of treatment on empowerment and satisfaction with services among individuals with severe and persistent mental illness.

Predicting academic self-handicapping in different age groups: the role of personal achievement goals and social goals.

PubMed

Leondari, Angeliki; Gonida, Eleftheria

2007-09-01

Academic self-handicapping refers to the use of impediments to successful performance on academic tasks. Previous studies have shown that it is related to personal achievement goals. A performance goal orientation is a positive predictor of self-handicapping, whereas a task goal orientation is unrelated to self-handicapping. The aim of this study was to examine the relationship between academic self-handicapping, goal orientations (task, performance-approach, performance-avoidance), social goals, future consequences and achievement in mathematics. An additional aim was to investigate grade-level and gender differences in relation to academic self-handicapping. Participants were 702 upper elementary, junior and senior high school students with approximately equal numbers of girls and boys. There were no grade-level or gender differences as regards the use of self-handicapping. The correlations among the variables revealed that, when the whole sample was considered, self-handicapping was positively related to performance goal orientations and pleasing significant others and negatively to achievement in mathematics. The results of hierarchical regression analysis showed that, in upper elementary and junior high schools, the association between achievement in mathematics and self-handicapping was mediated by performance-avoidance goals. In senior high school, only task goal orientation was a negative predictor of self-handicapping.

Improved methods for nightside time domain Lunar Electromagnetic Sounding

NASA Astrophysics Data System (ADS)

Fuqua-Haviland, H.; Poppe, A. R.; Fatemi, S.; Delory, G. T.; De Pater, I.

2017-12-01

Time Domain Electromagnetic (TDEM) Sounding isolates induced magnetic fields to remotely deduce material properties at depth. The first step of performing TDEM Sounding at the Moon is to fully characterize the dynamic plasma environment, and isolate geophysically induced currents from concurrently present plasma currents. The transfer function method requires a two-point measurement: an upstream reference measuring the pristine solar wind, and one downstream near the Moon. This method was last performed during Apollo assuming the induced fields on the nightside of the Moon expand as in an undisturbed vacuum within the wake cavity [1]. Here we present an approach to isolating induction and performing TDEM with any two point magnetometer measurement at or near the surface of the Moon. Our models include a plasma induction model capturing the kinetic plasma environment within the wake cavity around a conducting Moon, and a geophysical forward model capturing induction in a vacuum. The combination of these two models enable the analysis of magnetometer data within the wake cavity. Plasma hybrid models use the upstream plasma conditions and interplanetary magnetic field (IMF) to capture the wake current systems formed around the Moon. The plasma kinetic equations are solved for ion particles with electrons as a charge-neutralizing fluid. These models accurately capture the large scale lunar wake dynamics for a variety of solar wind conditions: ion density, temperature, solar wind velocity, and IMF orientation [2]. Given the 3D orientation variability coupled with the large range of conditions seen within the lunar plasma environment, we characterize the environment one case at a time. The global electromagnetic induction response of the Moon in a vacuum has been solved numerically for a variety of electrical conductivity models using the finite-element method implemented within the COMSOL software. This model solves for the geophysically induced response in vacuum to any driving transient event for any specified 3D conductivity profile. Our models fit the analytic solutions to a Root-Mean-Square Error of better than 1%. Solutions are non-unique, however, serve to better understand and constrain the global interior composition and 3D structure of the Moon. [1] Dyal & Parkin (1971) JGR; [2] Fatemi et al. (2013) GRL.

Operations-oriented performance measures for freeway management systems : final report.

DOT National Transportation Integrated Search

2008-12-01

This report describes the second and final year activities of the project titled Using Operations-Oriented Performance Measures to Support Freeway Management Systems. Work activities included developing a prototype system architecture for testi...

Anomalous heat transfer in two polymorphs of para-bromobenzophenone

NASA Astrophysics Data System (ADS)

Romantsova, O. O.; Horbatenko, Yu. V.; Krivchikov, A. I.; Korolyuk, O. A.; Vdovichenko, G. A.; Zloba, D. I.; Pyshkin, O. S.

2017-03-01

The thermal conductivity of a polycrystalline sample of monoclinic polymorph of para-bromobenzophenone in the T = 3-320 K temperature range was measured using steady-state linear heat flow. The temperature dependences of thermal conductivity are presented as the sum of two independent contributions: a contribution that corresponds to the thermal conductivity of an orientationally ordered crystal structure, and a new additional thermally activated contribution that manifests itself above 130 K. A comparison is made with the data on the thermal conductivity of a single crystal triclinic polymorph of para-bromobenzophenone. It is established that the contribution corresponding to the thermal conductivity of the orientationally ordered crystal structure depends on the molecular crystal packing, and the characteristic activation energy of the thermal activation contribution, which is caused by the intramolecular vibrations of the C-Br bond, does not depend on the grain size or on the structure of the sample.

Energies and 2'-Hydroxyl Group Orientations of RNA Backbone Conformations. Benchmark CCSD(T)/CBS Database, Electronic Analysis, and Assessment of DFT Methods and MD Simulations.

PubMed

Mládek, Arnošt; Banáš, Pavel; Jurečka, Petr; Otyepka, Michal; Zgarbová, Marie; Šponer, Jiří

2014-01-14

Sugar-phosphate backbone is an electronically complex molecular segment imparting RNA molecules high flexibility and architectonic heterogeneity necessary for their biological functions. The structural variability of RNA molecules is amplified by the presence of the 2'-hydroxyl group, capable of forming multitude of intra- and intermolecular interactions. Bioinformatics studies based on X-ray structure database revealed that RNA backbone samples at least 46 substates known as rotameric families. The present study provides a comprehensive analysis of RNA backbone conformational preferences and 2'-hydroxyl group orientations. First, we create a benchmark database of estimated CCSD(T)/CBS relative energies of all rotameric families and test performance of dispersion-corrected DFT-D3 methods and molecular mechanics in vacuum and in continuum solvent. The performance of the DFT-D3 methods is in general quite satisfactory. The B-LYP-D3 method provides the best trade-off between accuracy and computational demands. B3-LYP-D3 slightly outperforms the new PW6B95-D3 and MPW1B95-D3 and is the second most accurate density functional of the study. The best agreement with CCSD(T)/CBS is provided by DSD-B-LYP-D3 double-hybrid functional, although its large-scale applications may be limited by high computational costs. Molecular mechanics does not reproduce the fine energy differences between the RNA backbone substates. We also demonstrate that the differences in the magnitude of the hyperconjugation effect do not correlate with the energy ranking of the backbone conformations. Further, we investigated the 2'-hydroxyl group orientation preferences. For all families, we conducted a QM and MM hydroxyl group rigid scan in gas phase and solvent. We then carried out set of explicit solvent MD simulations of folded RNAs and analyze 2'-hydroxyl group orientations of different backbone families in MD. The solvent energy profiles determined primarily by the sugar pucker match well with the distribution data derived from the simulations. The QM and MM energy profiles predict the same 2'-hydroxyl group orientation preferences. Finally, we demonstrate that the high energy of unfavorable and rarely sampled 2'-hydroxyl group orientations can be attributed to clashes between occupied orbitals.

A Model of Metacognition, Achievement Goal Orientation, Learning Style and Self-Efficacy

ERIC Educational Resources Information Center

Coutinho, Savia A.; Neuman, George

2008-01-01

Structural equation modelling was used to test a model integrating achievement goal orientation, learning style, self-efficacy and metacognition into a single framework that explained and predicted variation in performance. Self-efficacy was the strongest predictor of performance. Metacognition was a weak predictor of performance. Deep processing…

Spatial scale and distribution of neurovascular signals underlying decoding of orientation and eye of origin from fMRI data

PubMed Central

Harrison, Charlotte; Jackson, Jade; Oh, Seung-Mock; Zeringyte, Vaida

2016-01-01

Multivariate pattern analysis of functional magnetic resonance imaging (fMRI) data is widely used, yet the spatial scales and origin of neurovascular signals underlying such analyses remain unclear. We compared decoding performance for stimulus orientation and eye of origin from fMRI measurements in human visual cortex with predictions based on the columnar organization of each feature and estimated the spatial scales of patterns driving decoding. Both orientation and eye of origin could be decoded significantly above chance in early visual areas (V1–V3). Contrary to predictions based on a columnar origin of response biases, decoding performance for eye of origin in V2 and V3 was not significantly lower than that in V1, nor did decoding performance for orientation and eye of origin differ significantly. Instead, response biases for both features showed large-scale organization, evident as a radial bias for orientation, and a nasotemporal bias for eye preference. To determine whether these patterns could drive classification, we quantified the effect on classification performance of binning voxels according to visual field position. Consistent with large-scale biases driving classification, binning by polar angle yielded significantly better decoding performance for orientation than random binning in V1–V3. Similarly, binning by hemifield significantly improved decoding performance for eye of origin. Patterns of orientation and eye preference bias in V2 and V3 showed a substantial degree of spatial correlation with the corresponding patterns in V1, suggesting that response biases in these areas originate in V1. Together, these findings indicate that multivariate classification results need not reflect the underlying columnar organization of neuronal response selectivities in early visual areas. NEW & NOTEWORTHY Large-scale response biases can account for decoding of orientation and eye of origin in human early visual areas V1–V3. For eye of origin this pattern is a nasotemporal bias; for orientation it is a radial bias. Differences in decoding performance across areas and stimulus features are not well predicted by differences in columnar-scale organization of each feature. Large-scale biases in extrastriate areas are spatially correlated with those in V1, suggesting biases originate in primary visual cortex. PMID:27903637

Orientation perception in rhesus monkeys (Macaca mulatta).

PubMed

Wakita, Masumi

2008-07-01

It was previously demonstrated that monkeys divide the orientation continuum into cardinal and oblique categories. However, it is still unclear how monkeys perceive within-category orientations. To better understand monkeys' perception of orientation, two experiments were conducted using five monkeys. In experiment 1, they were trained to identify either one cardinal or one oblique target orientation out of six orientations. The results showed that they readily identified the cardinal target whether it was oriented horizontally or vertically. However, a longer training period was needed to identify the oblique target orientation regardless of its degree and direction of tilt. In experiment 2, the same monkeys were trained to identify two-oblique target orientations out of six orientations. These orientations were paired, either sharing the degree of tilt, direction of tilt, or neither property. The results showed that the monkeys readily identified oblique orientations when they had either the same degree or direction of tilt. However, when the target orientations had neither the same degree nor direction of tilt, the animals had difficulty in identifying them. In summary, horizontal and vertical orientations are individually processed, indicating that monkeys do not have a category for cardinal orientation, but they may recognize cardinal orientations as non-obliques. In addition, monkeys efficiently abstract either the degree or the direction of tilt from oblique orientations, but they have difficulty combining these features to identify an oblique orientation. Thus, not all orientations within the oblique category are equally perceived.

Measuring Achievement Goal Orientations of Pharmacy Students

PubMed Central

Muthart, Thomas; Khan, Ghous M.

2014-01-01

Objectives. To measure the achievement goal orientations of pharmacy students attending a 3-year (accelerated) doctor of pharmacy (PharmD) program. Methods. A 16-item survey based on the Achievement Goal Questionnaire (AGQ) was administered to first-year (P1) and second-year (P2) pharmacy students at the Appalachian College of Pharmacy (ACP). Students were instructed to indicate to what degree each statement was true for them using a 7-point Likert scale (1=not true of me, 7=very true of me). Results. One hundred twenty of the 155 students (77%) completed the survey. Most students had mastery-approach, mastery-avoidance, performance-approach, and/or performance-avoidance goal orientations; few had work-avoidance goal orientations. Second-year students and male students had higher work-avoidance mean scores than did P1 students and female students (p<0.05). Conclusion. Pharmacy students were mastery- and performance-oriented learners, and most did not have work-avoidance goal orientations. Male students and P2 students had higher work-avoidance than did female students and P1 students, respectively. More longitudinal studies are needed to confirm these findings. PMID:24761015

Fundamental movement skills testing in children with cerebral palsy.

PubMed

Capio, Catherine M; Sit, Cindy H P; Abernethy, Bruce

2011-01-01

To examine the inter-rater reliability and comparative validity of product-oriented and process-oriented measures of fundamental movement skills among children with cerebral palsy (CP). In total, 30 children with CP aged 6 to 14 years (Mean = 9.83, SD = 2.5) and classified in Gross Motor Function Classification System (GMFCS) levels I-III performed tasks of catching, throwing, kicking, horizontal jumping and running. Process-oriented assessment was undertaken using a number of components of the Test of Gross Motor Development (TGMD-2), while product-oriented assessment included measures of time taken, distance covered and number of successful task completions. Cohen's kappa, Spearman's rank correlation coefficient and tests to compare correlated correlation coefficients were performed. Very good inter-rater reliability was found. Process-oriented measures for running and jumping had significant associations with GMFCS, as did seven product-oriented measures for catching, throwing, kicking, running and jumping. Product-oriented measures of catching, kicking and running had stronger associations with GMFCS than the corresponding process-oriented measures. Findings support the validity of process-oriented measures for running and jumping and of product-oriented measures of catching, throwing, kicking, running and jumping. However, product-oriented measures for catching, kicking and running appear to have stronger associations with functional abilities of children with CP, and are thus recommended for use in rehabilitation processes.

Parallel goal-oriented adaptive finite element modeling for 3D electromagnetic exploration

NASA Astrophysics Data System (ADS)

Zhang, Y.; Key, K.; Ovall, J.; Holst, M.

2014-12-01

We present a parallel goal-oriented adaptive finite element method for accurate and efficient electromagnetic (EM) modeling of complex 3D structures. An unstructured tetrahedral mesh allows this approach to accommodate arbitrarily complex 3D conductivity variations and a priori known boundaries. The total electric field is approximated by the lowest order linear curl-conforming shape functions and the discretized finite element equations are solved by a sparse LU factorization. Accuracy of the finite element solution is achieved through adaptive mesh refinement that is performed iteratively until the solution converges to the desired accuracy tolerance. Refinement is guided by a goal-oriented error estimator that uses a dual-weighted residual method to optimize the mesh for accurate EM responses at the locations of the EM receivers. As a result, the mesh refinement is highly efficient since it only targets the elements where the inaccuracy of the solution corrupts the response at the possibly distant locations of the EM receivers. We compare the accuracy and efficiency of two approaches for estimating the primary residual error required at the core of this method: one uses local element and inter-element residuals and the other relies on solving a global residual system using a hierarchical basis. For computational efficiency our method follows the Bank-Holst algorithm for parallelization, where solutions are computed in subdomains of the original model. To resolve the load-balancing problem, this approach applies a spectral bisection method to divide the entire model into subdomains that have approximately equal error and the same number of receivers. The finite element solutions are then computed in parallel with each subdomain carrying out goal-oriented adaptive mesh refinement independently. We validate the newly developed algorithm by comparison with controlled-source EM solutions for 1D layered models and with 2D results from our earlier 2D goal oriented adaptive refinement code named MARE2DEM. We demonstrate the performance and parallel scaling of this algorithm on a medium-scale computing cluster with a marine controlled-source EM example that includes a 3D array of receivers located over a 3D model that includes significant seafloor bathymetry variations and a heterogeneous subsurface.

Impact of Indoor Physical Environment on Learning Efficiency in Different Types of Tasks: A 3 × 4 × 3 Full Factorial Design Analysis.

PubMed

Xiong, Lilin; Huang, Xiao; Li, Jie; Mao, Peng; Wang, Xiang; Wang, Rubing; Tang, Meng

2018-06-13

Indoor physical environments appear to influence learning efficiency nowadays. For improvement in learning efficiency, environmental scenarios need to be designed when occupants engage in different learning tasks. However, how learning efficiency is affected by indoor physical environment based on task types are still not well understood. The present study aims to explore the impacts of three physical environmental factors (i.e., temperature, noise, and illuminance) on learning efficiency according to different types of tasks, including perception, memory, problem-solving, and attention-oriented tasks. A 3 × 4 × 3 full factorial design experiment was employed in a university classroom with 10 subjects recruited. Environmental scenarios were generated based on different levels of temperature (17 °C, 22 °C, and 27 °C), noise (40 dB(A), 50 dB(A), 60 dB(A), and 70 dB(A)) and illuminance (60 lx, 300 lx, and 2200 lx). Accuracy rate (AC), reaction time (RT), and the final performance indicator (PI) were used to quantify learning efficiency. The results showed ambient temperature, noise, and illuminance exerted significant main effect on learning efficiency based on four task types. Significant concurrent effects of the three factors on final learning efficiency was found in all tasks except problem-solving-oriented task. The optimal environmental scenarios for top learning efficiency were further identified under different environmental interactions. The highest learning efficiency came in thermoneutral, relatively quiet, and bright conditions in perception-oriented task. Subjects performed best under warm, relatively quiet, and moderately light exposure when recalling images in the memory-oriented task. Learning efficiency peaked to maxima in thermoneutral, fairly quiet, and moderately light environment in problem-solving process while in cool, fairly quiet and bright environment with regard to attention-oriented task. The study provides guidance for building users to conduct effective environmental intervention with simultaneous controls of ambient temperature, noise, and illuminance. It contributes to creating the most suitable indoor physical environment for improving occupants learning efficiency according to different task types. The findings could further supplement the present indoor environment-related standards or norms with providing empirical reference on environmental interactions.

High-Oriented Polypyrrole Nanotubes for Next-Generation Gas Sensor.

PubMed

Xue, Mianqi; Li, Fengwang; Chen, Dong; Yang, Zhanhai; Wang, Xiaowei; Ji, Junhui

2016-10-01

Highly oriented PPy nanotubes are grown by in situ vapor phase polymerization within a nanoscale template under low temperature. As-fabricated PPy nanotubes are used for gas sensing, where an ultralow detection limit (0.05 ppb) and very fast response are achieved. Such an in situ mass-productive method for synthesizing highly oriented conducting polymers may pave a new step toward next-generation gas sensors. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Setting the stage for health: Salutogenesis in midwifery professional knowledge in three European countries

PubMed Central

Meier Magistretti, Claudia; Downe, Soo; Lindstrøm, Bengt; Berg, Marie; Schwarz, Katharina Tritten

2016-01-01

There is a lack of systematic evidence concerning health orientation in maternity practice in the current climate of risk avoidance. The midwifery professional project is orientated toward the preservation of normal physiological processes during the maternity episode. This study investigates accounts of midwives who were working in health-orientated birth settings, to examine if and how they frame a health orientation in professional practice. Twenty-seven narrative interviews were conducted with midwives working in pre-, peri-, and postnatal care in different maternity care settings in Switzerland, Austria, and Germany. In-depth and comparative pattern data analyses were conducted. The distinct practice orientation of the participants was revealed in three main concepts, underpinned by a common framework mirroring the three parameters of the Sense of Coherence (comprehensibility, manageability, and meaningfulness) described in Aaron Antonovsky's salutogenic theory. The midwives’ implicit salutogenic knowledge shaped their reported actions in supporting mothers, fathers, and families to have health-promoting experiences in maternity care. These results suggest that an implicit health orientation in maternity care practice can be prefered through examination of the practice reports of midwives working in settings that have a health-promoting philosophy. Implications for midwifery practice and research are discussed. Consideration is given to the relevance of the results for debates about avoiding overtreatment and for the operationalization of salutogenic theory in health care practice.

Fabrication of a highly oriented line structure on an aluminum surface and the nanoscale patterning on the nanoscale structure using highly functional molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watanabe, Y.; Kato, H.; Takemura, S.

2009-07-15

The surface of an Al plate was treated with a combination of chemical and electrochemical processes for fabrication of surface nanoscale structures on Al plates. Chemical treatments by using acetone and pure water under supersonic waves were conducted on an Al surface. Additional electrochemical process in H{sub 2}SO{sub 4} solution created a finer and oriented nanoscale structure on the Al surface. Dynamic force microscopy (DFM) measurement clarified that the nanoscale highly oriented line structure was successfully created on the Al surface. The line distance was estimated approximately 30-40 nm. At the next stage, molecular patterning on the highly oriented linemore » structure by functional molecules such as copper phthalocyanine (CuPc) and fullerene C{sub 60} was also conducted. CuPc or C{sub 60} molecules were deposited on the highly oriented line structure on Al. A toluene droplet containing CuPc molecules was cast on the nanostructured Al plate and was extended on the surface. CuPc or C{sub 60} deposition on the nanostructured Al surface proceeded by evaporation of toluene. DFM and x-ray photoemission spectroscopy measurements demonstrated that a unique molecular pattern was fabricated so that the highly oriented groove channels were filled with the functional molecules.« less

A qualitative investigation into the usefulness and impact of the performance intervention zone system used in the diagnostic assessment of internationally educated massage therapists.

PubMed

Finch, Paul; Baskwill, Amanda

2011-04-01

Previous work (Finch, 2008) reported on the development and implementation of a safety oriented system of performance intervention zones (PIZ), which was used in the assessment of internationally educated massage therapists. The study reported in this paper explores the usefulness and impact of the system as experienced by the evaluators involved in the diagnostic assessment. This exploratory research was of a qualitative design in which data were collected during a series of individual semi-structured interviews with evaluators who used the performance intervention zone system during the diagnostic assessment of internationally educated massage therapists in Ontario. After obtaining informed consent, interviews were taped, transcribed and analyzed, resulting in identification of a number of themes and recommendations regarding future use and development of the system. Analysis revealed four themes within the data. These were that the performance intervention zone system 1) enhanced the confidence of examiners in their ability to conduct the comprehensive clinical examination effectively, 2) assisted and improved examiner decision making during the examination, 3) was a useful aid to communication regarding candidate performance, and 4) could be improved by clarifying the nature of intervention and implementing more extensive examiner training prior to the examination. The performance intervention zone system was found to be useful in orienting examiners to the evaluation process, in supporting decision making during the comprehensive clinical evaluation and as an aid to communication in the post-examination review of candidate performance. The system could be improved through implementation of a pre-examination workshop focused on use of the PIZ and by delineation of levels of examiner intervention during the examination. Copyright © 2010 Elsevier Ltd. All rights reserved.

Application of Magnetic and Geotechnical Methods for Archaeological Site Investigations

DTIC Science & Technology

2011-07-01

national historic preservation act NRM natural remnant magnetism NS north-south nT nano Tesla ID inside diameter OSB oriented strand board psi...3.4 Soil Box Experiments Compaction tests were conducted by loading soil into a wooden box (1 m3) constructed of oriented strand board ( OSB ) and

Orientation to Teaching for Adjunct Faculty (Instructors Manual).

ERIC Educational Resources Information Center

Greive, Donald; France, Richard E.

Guidelines for conducting and facilitating a workshop designed as an orientation for both beginning and experienced adjunct faculty at community colleges are presented in this instructor's manual. The manual contains the following 11 sections, each defining an objective or activity to be undertaken during the workshop, and providing…

Current Educational Technology Research Trends in Japan

ERIC Educational Resources Information Center

Nakayama, Minoru; Ueno, Maomi

2009-01-01

To examine trends in educational practice research, this article conducted a survey and analysis of factors affecting the review of research papers in the field of the educational technology in Japan. Two factors, namely, practical orientation and theoretical orientation, were extracted from 63 survey responses, and scores from members of a…

Modern Psychometrics for Assessing Achievement Goal Orientation: A Rasch Analysis

ERIC Educational Resources Information Center

Muis, Krista R.; Winne, Philip H.; Edwards, Ordene V.

2009-01-01

Background: A program of research is needed that assesses the psychometric properties of instruments designed to quantify students' achievement goal orientations to clarify inconsistencies across previous studies and to provide a stronger basis for future research. Aim: We conducted traditional psychometric and modern Rasch-model analyses of the…

Programme Content Orientation in Vocational Education and Training and Life Chances--A Comparative Study

ERIC Educational Resources Information Center

Kap, Hrvoje

2014-01-01

Comparative studies of vocational education and training systems rarely conduct systematic comparisons of the content of educational programmes, partly because of methodological difficulties. Yet, comparing the organisation of curricula can increase our understanding of how programme design reflects orientation towards various life chances in…

The Portrait of a Twenty-First Century Innovator in Education

ERIC Educational Resources Information Center

Koroleva, D. O.; Khavenson, T. E.

2015-01-01

The article analyzes the social and professional characteristics as well as the value orientations of the contemporary innovator in the field of education. The study was conducted among 304 participants in the 2014 Competition for Innovation in Education. The value orientations were revealed using Schwartz's Portrait Values Questionnaire. The…

Sexual Orientation Differences in HIV Testing Motivation among College Men

ERIC Educational Resources Information Center

Kort, Daniel N.; Samsa, Gregory P.; McKellar, Mehri S.

2017-01-01

Objective: To investigate sexual orientation differences in college men's motivations for HIV testing. Participants: 665 male college students in the Southeastern United States from 2006 to 2014. Methods: Students completed a survey on HIV risk factors and testing motivations. Logistic regressions were conducted to determine the differences…

Technology-Oriented Job Preparation. Final Report.

ERIC Educational Resources Information Center

One America, Inc., Washington, DC.

An extensive review of literature dealing with 263 technology-oriented vocational training programs was conducted to gather current information on the state of such training. Particular emphasis was placed on links between programs and government bodies or private sector entities and programs that could serve as models for those wishing to…

The Relationship between Study Habits, Attitudes and Orientation among Developmental Freshmen of Kean College.

ERIC Educational Resources Information Center

Gersten, Susan G. Liss

A study was conducted to determine if visual linguistic numeric, auditory linguistic numeric, and tactile concrete learners have statistically significant different study habits, study attitudes, and study orientation than their low visual linguistic numeric, low auditory linguistic numeric, and low tactile concrete counterparts. Data were…

Atomistic Modeling of Thermal Conductivity of Epoxy Nanotube Composites

NASA Astrophysics Data System (ADS)

Fasanella, Nicholas A.; Sundararaghavan, Veera

2016-05-01

The Green-Kubo method was used to investigate the thermal conductivity as a function of temperature for epoxy/single wall carbon nanotube (SWNT) nanocomposites. An epoxy network of DGEBA-DDS was built using the `dendrimer' growth approach, and conductivity was computed by taking into account long-range Coulombic forces via a k-space approach. Thermal conductivity was calculated in the direction perpendicular to, and along the SWNT axis for functionalized and pristine SWNT/epoxy nanocomposites. Inefficient phonon transport at the ends of nanotubes is an important factor in the thermal conductivity of the nanocomposites, and for this reason discontinuous nanotubes were modeled in addition to long nanotubes. The thermal conductivity of the long, pristine SWNT/epoxy system is equivalent to that of an isolated SWNT along its axis, but there was a 27% reduction perpendicular to the nanotube axis. The functionalized, long SWNT/epoxy system had a very large increase in thermal conductivity along the nanotube axis (~700%), as well as the directions perpendicular to the nanotube (64%). The discontinuous nanotubes displayed an increased thermal conductivity along the SWNT axis compared to neat epoxy (103-115% for the pristine SWNT/epoxy, and 91-103% for functionalized SWNT/epoxy system). The functionalized system also showed a 42% improvement perpendicular to the nanotube, while the pristine SWNT/epoxy system had no improvement over epoxy. The thermal conductivity tensor is averaged over all possible orientations to see the effects of randomly orientated nanotubes, and allow for experimental comparison. Excellent agreement is seen for the discontinuous, pristine SWNT/epoxy nanocomposite. These simulations demonstrate there exists a threshold of the SWNT length where the best improvement for a composite system with randomly oriented nanotubes would transition from pristine SWNTs to functionalized SWNTs.

Service Providers’ Experiences and Perspectives on Recovery-Oriented Mental Health System Reform

PubMed Central

Piat, Myra; Lal, Shalini

2016-01-01

Objective With the use of a qualitative approach, this study focuses on service providers’ experiences and perspectives on recovery-oriented reform. Methods Nine focus groups were conducted with a sample of 68 service providers recruited from three Canadian sites. Results Three major themes were identified: 1) positive attitudes towards recovery-oriented reform; 2) skepticism towards recovery-oriented reform; and 3) challenges associated with implementing recovery-oriented practice. These challenges pertained to conceptual uncertainty and consistency around the meanings of recovery; application of recovery-oriented practice with certain populations and in certain contexts; bureaucratization of recovery-oriented tools; limited leadership support; and, societal stigma and social exclusion of persons with mental illnesses. Conclusions and Implications for Practice The findings point towards challenges that might arise as system planners move ahead in their efforts toward implementing recovery within the mental health system. In this regard, we offer several recommendations for the planning of organizational and educational practices that support the implementation of recovery-oriented practice. PMID:22491368

Does case-mix based reimbursement stimulate the development of process-oriented care delivery?

PubMed

Vos, Leti; Dückers, Michel L A; Wagner, Cordula; van Merode, Godefridus G

2010-11-01

Reimbursement based on the total care of a patient during an acute episode of illness is believed to stimulate management and clinicians to reduce quality problems like waiting times and poor coordination of care delivery. Although many studies already show that this kind of case-mix based reimbursement leads to more efficiency, it remains unclear whether care coordination improved as well. This study aims to explore whether case-mix based reimbursement stimulates development of care coordination by the use of care programmes, and a process-oriented way of working. Data for this study were gathered during the winter of 2007/2008 in a survey involving all Dutch hospitals. Descriptive and structural equation modelling (SEM) analyses were conducted. SEM reveals that adoption of the case-mix reimbursement within hospitals' budgeting processes stimulates hospitals to establish care programmes by the use of process-oriented performance measures. However, the implementation of care programmes is not (yet) accompanied by a change in focus from function (the delivery of independent care activities) to process (the delivery of care activities as being connected to a chain of interdependent care activities). This study demonstrates that hospital management can stimulate the development of care programmes by the adoption of case-mix reimbursement within hospitals' budgeting processes. Future research is recommended to confirm this finding and to determine whether the establishment of care programmes will in time indeed lead to a more process-oriented view of professionals. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Improving Image Matching by Reducing Surface Reflections Using Polarising Filter Techniques

NASA Astrophysics Data System (ADS)

Conen, N.; Hastedt, H.; Kahmen, O.; Luhmann, T.

2018-05-01

In dense stereo matching applications surface reflections may lead to incorrect measurements and blunders in the resulting point cloud. To overcome the problem of disturbing reflexions polarising filters can be mounted on the camera lens and light source. Reflections in the images can be suppressed by crossing the polarising direction of the filters leading to homogeneous illuminated images and better matching results. However, the filter may influence the camera's orientation parameters as well as the measuring accuracy. To quantify these effects, a calibration and an accuracy analysis is conducted within a spatial test arrangement according to the German guideline VDI/VDE 2634.1 (2002) using a DSLR with and without polarising filter. In a second test, the interior orientation is analysed in more detail. The results do not show significant changes of the measuring accuracy in object space and only very small changes of the interior orientation (Δc ≤ 4 μm) with the polarising filter in use. Since in medical applications many tiny reflections are present and impede robust surface measurements, a prototypic trinocular endoscope is equipped with polarising technique. The interior and relative orientation is determined and analysed. The advantage of the polarising technique for medical image matching is shown in an experiment with a moistened pig kidney. The accuracy and completeness of the resulting point cloud can be improved clearly when using polarising filters. Furthermore, an accuracy analysis using a laser triangulation system is performed and the special reflection properties of metallic surfaces are presented.

High voltage electrophoretic deposition for electrochemical energy storage and other applications

NASA Astrophysics Data System (ADS)

Santhanagopalan, Sunand

High voltage electrophoretic deposition (HVEPD) has been developed as a novel technique to obtain vertically aligned forests of one-dimensional nanomaterials for efficient energy storage. The ability to control and manipulate nanomaterials is critical for their effective usage in a variety of applications. Oriented structures of one-dimensional nanomaterials provide a unique opportunity to take full advantage of their excellent mechanical and electrochemical properties. However, it is still a significant challenge to obtain such oriented structures with great process flexibility, ease of processing under mild conditions and the capability to scale up, especially in context of efficient device fabrication and system packaging. This work presents HVEPD as a simple, versatile and generic technique to obtain vertically aligned forests of different one-dimensional nanomaterials on flexible, transparent and scalable substrates. Improvements on material chemistry and reduction of contact resistance have enabled the fabrication of high power supercapacitor electrodes using the HVEPD method. The investigations have also paved the way for further enhancements of performance by employing hybrid material systems and AC/DC pulsed deposition. Multi-walled carbon nanotubes (MWCNTs) were used as the starting material to demonstrate the HVEPD technique. A comprehensive study of the key parameters was conducted to better understand the working mechanism of the HVEPD process. It has been confirmed that HVEPD was enabled by three key factors: high deposition voltage for alignment, low dispersion concentration to avoid aggregation and simultaneous formation of holding layer by electrodeposition for reinforcement of nanoforests. A set of suitable parameters were found to obtain vertically aligned forests of MWCNTs. Compared with their randomly oriented counterparts, the aligned MWCNT forests showed better electrochemical performance, lower electrical resistance and a capability to achieve superhydrophpbicity, indicating their potential in a broad range of applications. The versatile and generic nature of the HVEPD process has been demonstrated by achieving deposition on flexible and transparent substrates, as well as aligned forests of manganese dioxide (MnO2) nanorods. A continuous roll-printing HVEPD approach was then developed to obtain aligned MWCNT forest with low contact resistance on large, flexible substrates. Such large-scale electrodes showed no deterioration in electrochemical performance and paved the way for practical device fabrication. The effect of a holding layer on the contact resistance between aligned MWCNT forests and the substrate was studied to improve electrochemical performance of such electrodes. It was found that a suitable precursor salt like nickel chloride could be used to achieve a conductive holding layer which helped to significantly reduce the contact resistance. This in turn enhanced the electrochemical performance of the electrodes. High-power scalable redox capacitors were then prepared using HVEPD. Very high power/energy densities and excellent cyclability have been achieved by synergistically combining hydrothermally synthesized, highly crystalline α-MnO 2 nanorods, vertically aligned forests and reduced contact resistance. To further improve the performance, hybrid electrodes have been prepared in the form of vertically aligned forest of MWCNTs with branches of α-MnO 2 nanorods on them. Large- scale electrodes with such hybrid structures were manufactured using continuous HVEPD and characterized, showing further improved power and energy densities. The alignment quality and density of MWCNT forests were also improved by using an AC/DC pulsed deposition technique. In this case, AC voltage was first used to align the MWCNTs, followed by immediate DC voltage to deposit the aligned MWCNTs along with the conductive holding layer. Decoupling of alignment from deposition was proven to result in better alignment quality and higher electrochemical performance.

Protocol for a mixed studies systematic review on the implementation of the recovery approach in adult mental health services

PubMed Central

Piat, Myra; Sofouli, Eleni; Sabetti, Judith; Lambrou, Angella; Chodos, Howard; Briand, Catherine; Vachon, Brigitte; Curran, Janet

2017-01-01

Introduction Recovery is integral to mental health planning in G-8 countries including Canada. A recovery-oriented approach to care aims to promote personal empowerment, illness self-management and a life beyond services for people with serious mental illness (SMI), while reducing the financial burden associated with mental illness. Although there is a growing body of literature on recovery, no synthesis of research on the implementation of recovery into mental health services exists. Objectives The objective is to conduct a mixed studies systematic review on the operationalisation of recovery into mental health services for adults with SMI. It will inform the transformation of Canadian services to a recovery orientation, but may be applicable to other countries. Methods and analysis Seven databases including PubMed, Ovid Medline, Ovid Embase, Ovid PsycInfo, CINAHL, the Cochrane Library and Scopus will be searched for peer-reviewed empirical studies published from 1998 to December 2016. Systematic reviews and studies using quantitative, qualitative and mixed methodologies will be included. Secondary searches will be conducted in reference lists of all selected full text articles. Handsearches will also be performed in the tables of contents of three recovery-focused journals for the last 5 years. International experts in the field will be contacted for comments and advice. Data extraction will include identification and methodological synthesis of each study; definition of recovery; information on recovery implementation; facilitators and barriers and study outcomes. A quality assessment will be conducted on each study. The data will be synthesised and a stepwise thematic analysis performed. Ethics and dissemination Ethics approval is not required for this knowledge synthesis. Findings will be disseminated through knowledge translation activities including: (1) a 1-day symposium; (2) presentations in national and international conferences and to local stakeholders; (3) publications in peer-reviewed journals; (4) posts on the organisational websites. PMID:28855202

Comparative Investigation and Operational Performance Characteristics of a Wick Assisted and Axially Square Grooved Heat Pipe

NASA Astrophysics Data System (ADS)

Naik, Rudra, Dr.; Rama Narasihma, K., Dr.; Anikivi, Atmanand

2018-04-01

The present work reported here involves the experimental investigation and performance evaluation of wick assisted and axially square grooved heat pipes of outer diameter 8mm, inner diameter 4mm with a length of 150mm.The objective of this work is to design, fabricate and test the heat pipes with and without an axial square groove for horizontal and gravity assisted conditions. The performance of the heat pipes was measured in terms of thermal resistance and heat transfer coefficients. In the present investigation four different working fluids were chosen namely acetone, ethanol, methanol and distilled water. Experiments were conducted by varying the heat load from 2 W to 10 W for different fill charge ratios in the range of 25% to 75% of evaporator volume for wick assisted heat pipe and 8 W to 18 W for axially square grooved heat pipe. From the experiments, it was found that there is a steady increase in temperature with the increase in heat input. The overall heat transfer coefficient was found to increase with the increase heat load for wick assisted heat pipe. In case of axially square grooved heat pipe, an attempt was made to experiment the heat pipe in different orientations. The maximum heat transfer coefficient of 7000 W/m2 °C is found for Acetone at 180° orientation.

3-D Modeling of Double-Diffusive Convection During Directional Solidification of a Non-Dilute Alloy with Application to the HgCdTe Growth Under Microgravity Conditions

NASA Technical Reports Server (NTRS)

Bune, Andris V.; Gillies, Donald C.; Lehoczky, Sandor L.

1998-01-01

A numerical calculation for a non-dilute alloy solidification was performed using the FIDAP finite element code. For low growth velocities plane front solidification occurs. The location and the shape of the interface was determined using melting temperatures from the HgCdTe liquidus curve. The low thermal conductivity of the solid HgCdTe causes thermal short circuit through the ampoule walls, resulting in curved isotherms in the vicinity of the interface. Double-diffusive convection in the melt is caused by radial temperature gradients and by material density inversion with temperature. Cooling from below and the rejection at the solid-melt interface of the heavier HgTe-rich solute each tend to reduce convection. Because of these complicating factors dimensional rather then non-dimensional modeling was performed. Estimates of convection contributions for various gravity conditions was performed parametrically. For gravity levels higher then 1 0 -7 of earth's gravity it was found that the maximum convection velocity is extremely sensitive to gravity vector orientation and can be reduced at least by factor of 50% for precise orientation of the ampoule in the microgravity environment. The predicted interface shape is in agreement with one obtained experimentally by quenching. The results of 3-D modeling are compared with previous 2-D finding. A video film featuring melt convection will be presented.

Student goal orientation in learning inquiry skills with modifiable software advisors

NASA Astrophysics Data System (ADS)

Shimoda, Todd A.; White, Barbara Y.; Frederiksen, John R.

2002-03-01

A computer support environment (SCI-WISE) for learning and doing science inquiry projects was designed. SCI-WISE incorporates software advisors that give general advice about a skill such as hypothesizing. By giving general advice (rather than step-by-step procedures), the system is intended to help students conduct experiments that are more epistemologically authentic. Also, students using SCI-WISE can select the type of advice the advisors give and when they give advice, as well as modify the advisors' knowledge bases. The system is based partly on a theoretical framework of levels of agency and goal orientation. This framework assumes that giving students higher levels of agency facilitates higher-level goal orientations (such as mastery or knowledge building as opposed to task completion) that in turn produce higher levels of competence. A study of sixth grade science students was conducted. Students took a pretest questionnaire that measured their goal orientations for science projects and their inquiry skills. The students worked in pairs on an open-ended inquiry project that requires complex reasoning about human memory. The students used one of two versions of SCI-WISE - one that was modifiable and one that was not. After finishing the project, the students took a posttest questionnaire similar to the pretest, and evaluated the version of the system they used. The main results showed that (a) there was no correlation of goal orientation with grade point average, (b) knowledge-oriented students using the modifiable version tended to rate SCI-WISE more helpful than task-oriented students, and (c) knowledge-oriented pairs using the nonmodifiable version tended to have higher posttest inquiry skills scores than other pair types.

Numerical Simulation with Experimental Validation of the Draping Behavior of Woven Fabrics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodgers, William; Pasupuleti, Praveen; Zhao, Selina

Woven fabric composites are extensively used in molding complex geometrical shapes due to their high conformability compared to other fabrics. Preforming is an important step in the overall process. In this step, the two-dimensional fabric is draped to become the three-dimensional shape of the part prior to resin injection. During preforming, the orientation of the tows may change significantly compared to the initial orientations. Accurate prediction of the tow orientations after molding is important for evaluating the structural performance of the final part. This paper investigates the fiber angle changes for carbon fiber woven fabrics during draping over a truncatedmore » pyramid tool designed and fabricated at the General Motors Research Labs. This aspect of study is a subset of the broad study conducted under the purview of a Department of Energy project funded to GM in developing state of the art computational tools for integrated manufacturing and structural performance prediction of carbon fiber composites. Fabric bending, picture frame testing, and bias-extension evaluations were carried out to determine the material parameters for these fabrics. The PAM-FORM computer program was used to model the draping behavior of these fabrics. Following deformation, fiber angle changes at different locations on the truncated pyramid were measured experimentally. The predicted angles matched the experimental results well as measured along the centerline and at several different locations on the deformed fabric. Details of the test methods used as well as the numerical results with various simulation parameters will be provided.« less

Bridging the gap in 1(st) year dental material curriculum: A 3 year randomized cross over trial.

PubMed

Gali, Sivaranjani; Shetty, Vibha; Murthy, N S; Marimuthu, P

2015-01-01

Case-oriented small group discussions (COSGDs) can help students to correlate and integrate the basic science of dental materials into clinical application. We used COSGDs along with didactic lectures in dental material curriculum and hypothesized that case-oriented group discussions would be more effective than traditional lecture alone in terms of performance of students, student perception on the above two teaching methodologies and the feasibility in classes of 2010, 2011 and 2012. A total of 170 students were taught using both COSGD and didactic lecture in a randomized controlled crossover trial design. Their performance was assessed through multiple-choice questions (MCQs) as part of the formative assessment, and their perception was assessed through Likert scale questionnaire. The mean difference in the scores between case-oriented group discussions with lecture and didactic lecture showed significant difference only in few topics. Around 94-96% of students perceived COSGD with didactic lecture help them understand theory better; 76-92% of students feel more comfortable asking questions in a group discussion; 89-98% of students feel such discussions motivate them and 91-100% of students agree that discussions make the subject interesting in the respective years of 2010, 2011 and 2012. Effectiveness of COSGD in terms of scores through MCQs is comparable to traditional lecture. However, most of the students perceive COSGD help them understand the theory better; co-relate clinically; more motivating and interesting than a traditional lecture. Feasibility in institution needs more time and resources to conduct COSGD within the dental material curriculum.

Spatial disorientation in right-hemisphere infarction: a study of the speed of recovery.

PubMed Central

Meerwaldt, J D

1983-01-01

Sixteen patients with an infarct in the posterior region of the right hemisphere were tested at fixed intervals after a stroke (2 weeks, 6 weeks, 3 months, 6 months, 1 year) with the rod orientation test and the line orientation test. All patients initially showed spatial disorientation on the rod orientation test, while only three had a defective performance on the line orientation test. The recovery on the rod orientation test was parallel with the neurological improvement. Recovery mainly took place in the first six months after the stroke. Most patients then performed at a normal level. A relation between the size of the lesion (assessed from CT scans) and the speed of recovery was found. PMID:6101178

Semantic-gap-oriented active learning for multilabel image annotation.

PubMed

Tang, Jinhui; Zha, Zheng-Jun; Tao, Dacheng; Chua, Tat-Seng

2012-04-01

User interaction is an effective way to handle the semantic gap problem in image annotation. To minimize user effort in the interactions, many active learning methods were proposed. These methods treat the semantic concepts individually or correlatively. However, they still neglect the key motivation of user feedback: to tackle the semantic gap. The size of the semantic gap of each concept is an important factor that affects the performance of user feedback. User should pay more efforts to the concepts with large semantic gaps, and vice versa. In this paper, we propose a semantic-gap-oriented active learning method, which incorporates the semantic gap measure into the information-minimization-based sample selection strategy. The basic learning model used in the active learning framework is an extended multilabel version of the sparse-graph-based semisupervised learning method that incorporates the semantic correlation. Extensive experiments conducted on two benchmark image data sets demonstrated the importance of bringing the semantic gap measure into the active learning process.

Ballistic Impact Response of Kevlar 49 and Zylon under Conditions Representing Jet Engine Fan Containment

NASA Technical Reports Server (NTRS)

Pereira, J. Michael; Revilock, Duane M.

2007-01-01

A ballistic impact test program was conducted to provide validation data for the development of numerical models of blade out events in fabric containment systems. The impact response of two different fiber materials - Kevlar 49 (E.I. DuPont Nemours and Company) and Zylon AS (Toyobo Co., Ltd.) was studied by firing metal projectiles into dry woven fabric specimens using a gas gun. The shape, mass, orientation and velocity of the projectile were varied and recorded. In most cases the tests were designed such that the projectile would perforate the specimen, allowing measurement of the energy absorbed by the fabric. The results for both Zylon and Kevlar presented here represent a useful set of data for the purposes of establishing and validating numerical models for predicting the response of fabrics under conditions simulating those of a jet engine blade release situation. In addition some useful empirical observations were made regarding the effects of projectile orientation and the relative performance of the different materials.

Rewetting of monogroove heat pipe in Space Station radiators

NASA Technical Reports Server (NTRS)

Chan, S. H.

1994-01-01

This annual report summarizes the work accomplished on rewetting of monogroove heat pipe in space station. Specifically, theoretical and experimental investigations of the rewetting characteristics of thin liquid films over unheated and heated capillary grooved plates were performed. To investigate the effect of gravity on rewetting, the grooved surface was placed in upward and downward facing positions. Profound gravitational effects were observed as the rewetting velocity was found to be higher in the upward than in the downward facing orientation. The difference was even greater with higher initial plate temperatures. With either orientation, it was found that the rewetting velocity increased with the initial plate temperature. But when the temperature was raised above a rewetting temperature, the rewetting velocity decreased with the initial plate temperature. Hydrodynamically controlled and heat conduction controlled rewetting models were then presented to explain and to predict the rewetting characteristics in these two distinct regions. The predicted rewetting velocities were found to be in good agreement with experimental data with elevated plate temperatures.

Comparison of high temperature, high frequency core loss and dynamic B-H loops of a 2V-49Fe-49Co and a grain oriented 3Si-Fe alloy

NASA Technical Reports Server (NTRS)

Wieserman, W. R.; Schwarze, G. E.; Niedra, J. M.

1992-01-01

The design of power magnetic components such as transformers, inductors, motors, and generators, requires specific knowledge about the magnetic and electrical characteristics of the magnetic materials used in these components. Limited experimental data exists that characterizes the performance of soft magnetic materials for the combined conditions of high temperature and high frequency over a wide flux density range. An experimental investigation of a 2V-49-Fe-49Co (Supermendur) and a grain oriented 3 Si-Fe (Magnesil) alloy was conducted over the temperature range of 23 to 300 C and frequency range of 0.1 to 10 kHz. The effects of temperature, frequency, and maximum flux density on the core loss and dynamic B-H loops for sinusoidal voltage excitation conditions are examined for each of these materials. A comparison of the core loss of these two materials is also made over the temperature and frequency range investigated.

Understanding and Improving High-Performance I/O Subsystems

NASA Technical Reports Server (NTRS)

El-Ghazawi, Tarek A.; Frieder, Gideon; Clark, A. James

1996-01-01

This research program has been conducted in the framework of the NASA Earth and Space Science (ESS) evaluations led by Dr. Thomas Sterling. In addition to the many important research findings for NASA and the prestigious publications, the program has helped orienting the doctoral research program of two students towards parallel input/output in high-performance computing. Further, the experimental results in the case of the MasPar were very useful and helpful to MasPar with which the P.I. has had many interactions with the technical management. The contributions of this program are drawn from three experimental studies conducted on different high-performance computing testbeds/platforms, and therefore presented in 3 different segments as follows: 1. Evaluating the parallel input/output subsystem of a NASA high-performance computing testbeds, namely the MasPar MP- 1 and MP-2; 2. Characterizing the physical input/output request patterns for NASA ESS applications, which used the Beowulf platform; and 3. Dynamic scheduling techniques for hiding I/O latency in parallel applications such as sparse matrix computations. This study also has been conducted on the Intel Paragon and has also provided an experimental evaluation for the Parallel File System (PFS) and parallel input/output on the Paragon. This report is organized as follows. The summary of findings discusses the results of each of the aforementioned 3 studies. Three appendices, each containing a key scholarly research paper that details the work in one of the studies are included.

Nanostructure design for drastic reduction of thermal conductivity while preserving high electrical conductivity

PubMed Central

Nakamura, Yoshiaki

2018-01-01

Abstract The design and fabrication of nanostructured materials to control both thermal and electrical properties are demonstrated for high-performance thermoelectric conversion. We have focused on silicon (Si) because it is an environmentally friendly and ubiquitous element. High bulk thermal conductivity of Si limits its potential as a thermoelectric material. The thermal conductivity of Si has been reduced by introducing grains, or wires, yet a further reduction is required while retaining a high electrical conductivity. We have designed two different nanostructures for this purpose. One structure is connected Si nanodots (NDs) with the same crystal orientation. The phonons scattering at the interfaces of these NDs occurred and it depended on the ND size. As a result of phonon scattering, the thermal conductivity of this nanostructured material was below/close to the amorphous limit. The other structure is Si films containing epitaxially grown Ge NDs. The Si layer imparted high electrical conductivity, while the Ge NDs served as phonon scattering bodies reducing thermal conductivity drastically. This work gives a methodology for the independent control of electron and phonon transport using nanostructured materials. This can bring the realization of thermoelectric Si-based materials that are compatible with large scale integrated circuit processing technologies. PMID:29371907

High through-plane thermal conduction of graphene nanoflake filled polymer composites melt-processed in an L-shape kinked tube.

PubMed

Jung, Haejong; Yu, Seunggun; Bae, Nam-Seok; Cho, Suk Man; Kim, Richard Hahnkee; Cho, Sung Hwan; Hwang, Ihn; Jeong, Beomjin; Ryu, Ji Su; Hwang, Junyeon; Hong, Soon Man; Koo, Chong Min; Park, Cheolmin

2015-07-22

Design of materials to be heat-conductive in a preferred direction is a crucial issue for efficient heat dissipation in systems using stacked devices. Here, we demonstrate a facile route to fabricate polymer composites with directional thermal conduction. Our method is based on control of the orientation of fillers with anisotropic heat conduction. Melt-compression of solution-cast poly(vinylidene fluoride) (PVDF) and graphene nanoflake (GNF) films in an L-shape kinked tube yielded a lightweight polymer composite with the surface normal of GNF preferentially aligned perpendicular to the melt-flow direction, giving rise to a directional thermal conductivity of approximately 10 W/mK at 25 vol % with an anisotropic thermal conduction ratio greater than six. The high directional thermal conduction was attributed to the two-dimensional planar shape of GNFs readily adaptable to the molten polymer flow, compared with highly entangled carbon nanotubes and three-dimensional graphite fillers. Furthermore, our composite with its density of approximately 1.5 g/cm(3) was mechanically stable, and its thermal performance was successfully preserved above 100 °C even after multiple heating and cooling cycles. The results indicate that the methodology using an L-shape kinked tube is a new way to achieve polymer composites with highly anisotropic thermal conduction.

The Influence of Task Involvement on the Use of Learning Strategies.

ERIC Educational Resources Information Center

Nolen, Susan Bobbitt

The relationship between goal orientation and the use of learning strategies and their effects on learning outcomes were investigated. The three goal orientations considered were: (1) task orientation, which involves learning for its own sake; (2) ego orientation, which involves a desire to perform better than others; and (3) work avoidance, which…

The Relationship between Student Teachers' Perception of Intelligence and Their Goal Orientation

ERIC Educational Resources Information Center

Beyaztas, Dilek Ilhan; Kapti, Suzan Beyza; Hymer, Barry

2017-01-01

This study examines the views of student teachers in a Turkish university about intelligence (entity theory vs incremental theory) and goal orientation (performance goal orientation vs learning goal orientation) and the relationship between the two. Specifically, it seeks to understand whether there are any differences in participants' perceptions…

C++ and operating systems performance - A case study

NASA Technical Reports Server (NTRS)

Russo, Vincent F.; Madany, Peter W.; Campbell, Roy H.

1990-01-01

Object-oriented design and programming has many software engineering advantages. Its application to large systems, however, has previously been constrained by performance concerns. The Choices operating system, which has over 75,000 lines of code, is object-oriented and programmed in C++. This paper is a case study of the performance of Choices.

Ion-/proton-conducting apparatus and method

DOEpatents

Yates, Matthew [Penfield, NY; Liu, Dongxia [Rochester, NY

2011-05-17

A c-axis-oriented HAP thin film synthesized by seeded growth on a palladium hydrogen membrane substrate. An exemplary synthetic process includes electrochemical seeding on the substrate, and secondary and tertiary hydrothermal treatments under conditions that favor growth along c-axes and a-axes in sequence. By adjusting corresponding synthetic conditions, an HAP this film can be grown to a controllable thickness with a dense coverage on the underlying substrate. The thin films have relatively high proton conductivity under hydrogen atmosphere and high temperature conditions. The c-axis oriented films may be integrated into fuel cells for application in the intermediate temperature range of 200-600.degree. C. The electrochemical-hydrothermal deposition technique may be applied to create other oriented crystal materials having optimized properties, useful for separations and catalysis as well as electronic and electrochemical applications, electrochemical membrane reactors, and in chemical sensors.

Thermal and Structural Analysis of a Hollow Core Space Shuttle Main Engine (SSME) Turbine Blade

NASA Technical Reports Server (NTRS)

Abdul-Aziz, Ali; Kalluri, Sreeramesh; McGaw, Michael A.

1995-01-01

The influence of primary and secondary orientations on the elastic response of a hollow core, (001)-oriented nickel base single-crystal superalloy turbine blade, was investigated under combined thermal and mechanical conditions. Finite element techniques is employed through MARC finite element code to conduct the analyses on a hollow core SSME turbine blade made out of PWA 1480 single crystal material. Primary orientation of the single crystal superalloy was varied in increments of 2 deg, from 0 to 10 deg, from the (001) direction. Two secondary orientations (0 and 45 deg) were considered with respect to the global coordinate system, as the primary orientation angle was varied. The stresses developed within the single crystal blade were determined for different orientations of the blade. The influence of angular offsets such as the single crystal's primary and secondary orientations and the loading conditions on the elastic stress response of the PWA 1480 hollow blade are summarized. The influence of he primary orientation angle, when constrained between the bounds considered, was not found to be as significant as the influence of the secondary orientation angle.

Contactless Determination of Electrical Conductivity of One-Dimensional Nanomaterials by Solution-Based Electro-orientation Spectroscopy

DOE PAGES

Akin, Cevat; Yi, Jingang; Feldman, Leonard C.; ...

2015-05-05

For nanowires of the same composition, and even fabricated within the same batch, often exhibit electrical conductivities that can vary by orders of magnitude. Unfortunately, existing electrical characterization methods are time-consuming, making the statistical survey of highly variable samples essentially impractical. Here, we demonstrate a contactless, solution-based method to efficiently measure the electrical conductivity of 1D nanomaterials based on their transient alignment behavior in ac electric fields of different frequencies. In comparison with direct transport measurements by probe-based scanning tunneling microscopy shows that electro-orientation spectroscopy can quantitatively measure nanowire conductivity over a 5-order-of-magnitude range, 10–5–1 Ω–1 m–1 (corresponding to resistivitiesmore » in the range 102–107 Ω·cm). With this method, we statistically characterize the conductivity of a variety of nanowires and find significant variability in silicon nanowires grown by metal-assisted chemical etching from the same wafer. We also find that the active carrier concentration of n-type silicon nanowires is greatly reduced by surface traps and that surface passivation increases the effective conductivity by an order of magnitude. Moreover, this simple method makes electrical characterization of insulating and semiconducting 1D nanomaterials far more efficient and accessible to more researchers than current approaches. Electro-orientation spectroscopy also has the potential to be integrated with other solution-based methods for the high-throughput sorting and manipulation of 1D nanomaterials for postgrowth device assembly.« less

Large sexual-orientation-related differences in performance on mental rotation and judgment of line orientation tasks.

PubMed

Rahman, Qazi; Wilson, Glenn D

2003-01-01

This study examined the performance of heterosexual and homosexual men and women on 2 tests of spatial processing, mental rotation (MR) and Benton Judgment of Line Orientation (JLO). The sample comprised 60 heterosexual men, 60 heterosexual women, 60 homosexual men, and 60 homosexual women. There were significant main effects of gender (men achieving higher scores overall) and Gender x Sexual Orientation interactions. Decomposing these interactions revealed large differences between the male groups in favor of heterosexual men on JLO and MR performance. There was a modest difference between the female groups on MR total correct scores in favor of homosexual women but no differences in MR percentage correct. The evidence suggests possible variations in the parietal cortex between homosexual and heterosexual persons.

Consideration of learning orientations as an application of achievement goals in evaluating life science majors in introductory physics

NASA Astrophysics Data System (ADS)

Mason, Andrew J.; Bertram, Charles A.

2018-06-01

When considering performing an Introductory Physics for Life Sciences course transformation for one's own institution, life science majors' achievement goals are a necessary consideration to ensure the pedagogical transformation will be effective. However, achievement goals are rarely an explicit consideration in physics education research topics such as metacognition. We investigate a sample population of 218 students in a first-semester introductory algebra-based physics course, drawn from 14 laboratory sections within six semesters of course sections, to determine the influence of achievement goals on life science majors' attitudes towards physics. Learning orientations that, respectively, pertain to mastery goals and performance goals, in addition to a learning orientation that does not report a performance goal, were recorded from students in the specific context of learning a problem-solving framework during an in-class exercise. Students' learning orientations, defined within the context of students' self-reported statements in the specific context of a problem-solving-related research-based course implementation, are compared to pre-post results on physics problem-solving items in a well-established attitudinal survey instrument, in order to establish the categories' validity. In addition, mastery-related and performance-related orientations appear to extend to overall pre-post attitudinal shifts, but not to force and motion concepts or to overall course grade, within the scope of an introductory physics course. There also appears to be differentiation regarding overall course performance within health science majors, but not within biology majors, in terms of learning orientations; however, health science majors generally appear to fare less well on all measurements in the study than do biology majors, regardless of learning orientations.

Understanding the molecular aspects of oriental obesity pattern differentiation using DNA microarray.

PubMed

Hong, Sun Woo; Yoo, Jae-Wook; Bose, Shambhunath; Park, Jung-Hyun; Han, Kyungsun; Kim, Soyoun; Lim, Chi-Yeon; Kim, Hojun; Lee, Dong-Ki

2015-10-19

Human constitution, the fundamental basis of oriental medicine, is categorized into different patterns for a particular disease according to the physical, physiological, and clinical characteristics of the individuals. Obesity, a condition of metabolic disorder, is classified according to six patterns in oriental medicine, as follows: spleen deficiency syndrome, phlegm fluid syndrome, yang deficiency syndrome (YDS), food accumulation syndrome (FAS), liver depression syndrome (LDS), and blood stasis syndrome. In oriental medicine, identification of the disease pattern for individual obese patients is performed on the basis of differentiation in obesity syndrome index and, accordingly, personalized treatment is provided to the patients. The aim of the current study was to understand the obesity patterns in oriental medicine from the genomic point of view via determining the gene expression signature of obese patients using peripheral blood mononuclear cells as the samples. The study was conducted in 23 South Korean obese subjects (19 female and four male) with BMI ≥25 kg/m(2). Identification of oriental obesity pattern was based on the software-guided evaluation of the responses of the subjects to a questionnaire developed by the Korean Institute of Oriental Medicine. The expression profiles of genes were determined using DNA microarray and the level of transcription of genes of interest was further evaluated using quantitative real-time PCR (qRT-PCR). Gene clustering analysis of the microarray data from the FAS, LDS, and YDS subjects exhibited disease pattern-specific upregulation of expression of several genes in a particular cluster. Further analysis of transcription of selected genes using qRT-PCR led to identification of specific genes, including prostaglandin endoperoxide synthase 2, G0/G1 switch 2, carcinoembryonic antigen-related cell adhesion molecule 3, cystein-serine-rich nuclear protein 1, and interleukin 8 receptor, alpha which were highly expressed in LDS obesity constitution. Our current study can be considered as a valuable contribution to the understanding of possible explanation for obesity pattern differentiation in oriental medicine. Further studies can address a novel possibility that the genomic and oriental empirical approaches can be combined and implemented in systematic and synergistic development of personalized medicine. This clinical trial was registered in Clinical Research Information Service of Korea National Institute of Health ( https://cris.nih.go.kr/cris/index.jsp ). KCT0000387.

Visual cues to geographical orientation during low-level flight

NASA Technical Reports Server (NTRS)

Battiste, Vernol; Delzell, Suzanne

1991-01-01

A field study of an operational Emergency Medical Service (EMS) unit was conducted to investigate the relationships among geographical orientation, pilot decision making, and workload in EMS flights. The map data collected during this study were compared to protocols gathered in the laboratory, where pilots viewed a simulated flight over different types of unfamiliar terrain and verbally identified the features utilized to maintain geographical orientation. The EMS pilot's questionnaire data were compared with data from non-EMS helicopter pilots with comparable flight experience.

Individual differences in using geometric and featural cues to maintain spatial orientation: cue quantity and cue ambiguity are more important than cue type.

PubMed

Kelly, Jonathan W; McNamara, Timothy P; Bodenheimer, Bobby; Carr, Thomas H; Rieser, John J

2009-02-01

Two experiments explored the role of environmental cues in maintaining spatial orientation (sense of self-location and direction) during locomotion. Of particular interest was the importance of geometric cues (provided by environmental surfaces) and featural cues (nongeometric properties provided by striped walls) in maintaining spatial orientation. Participants performed a spatial updating task within virtual environments containing geometric or featural cues that were ambiguous or unambiguous indicators of self-location and direction. Cue type (geometric or featural) did not affect performance, but the number and ambiguity of environmental cues did. Gender differences, interpreted as a proxy for individual differences in spatial ability and/or experience, highlight the interaction between cue quantity and ambiguity. When environmental cues were ambiguous, men stayed oriented with either one or two cues, whereas women stayed oriented only with two. When environmental cues were unambiguous, women stayed oriented with one cue.

Thermal Analysis of Filler Reinforced Polymeric Composites

NASA Astrophysics Data System (ADS)

Ghadge, Mahesh Devidas

Improving heat dissipating property of composite materials is becoming increasingly important in domains ranging from the automotive industry, electronic devices to aeronautical industry. Effective heat dissipation is required especially in aircraft and racing tires to guarantee high performance and good service life [1]. The present study is focused on improving the thermal conductivity of Emulsion-styrene butadiene rubber (ESBR) which is a cheap alternative to other rubber composites. The disadvantages of ESBR are low thermal conductivity and high heat generation. Adding fillers with high thermal conductivity to ESBR is proposed as a technique for improving the thermal conductivity of ESBR. The purpose of the research is to predict the thermal conductivity of ESBR when filled with fillers of much higher thermal conductivity and also to find out to what extent the filler properties affect the heat transfer capabilities of the composite matrix. The influence of different filler shapes i.e. spherical, cylindrical and platelets on the overall thermal capability of composite matrix is studied, the finite element modelings are conducted using Abaqus. Three-dimensional and two-dimensional models are created in Abaqus to simulate the microstructure of the composite matrix filled with fillers. Results indicate that the overall thermal conductivity increases with increasing filler loading i.e. for a filler volume fraction of 0.27, the conductivity increased by around 50%. Filler shapes, orientation angle, and aspect ratio of the fillers significantly influences the thermal conductivity. Conductivity increases with increasing aspect ratio (length/diameter) of the cylindrical fillers since longer conductive chains are able to form at the same volume percentage as compared to spherical fillers. The composite matrix reaches maximum thermal conductivity when the cylindrical fillers are oriented in the direction of heat flow. The heat conductivity predicted by FEM for ESBR is compared with that predicted by mean field theories. At low volume fractions the FEM and mean field theory results are matching. However, at high volume fractions, the results obtained by the two methods are not in agreement. This is due to the fact that mean field theory do not consider the particle interactions happening at higher volume fractions. The present analysis can be used to tailor the thermal properties of ESBR for required thermal conductivity for a wide range of applications such as racing tires, electronic gadgets or aeronautical components. In addition, the proposed FEM models can be used to design and optimize the properties of new composite materials providing more insight into the thermal conductivity of composite polymers and aid in understanding heat transfer mechanism of reinforced polymers.

The effects of delay duration on visual working memory for orientation.

PubMed

Shin, Hongsup; Zou, Qijia; Ma, Wei Ji

2017-12-01

We used a delayed-estimation paradigm to characterize the joint effects of set size (one, two, four, or six) and delay duration (1, 2, 3, or 6 s) on visual working memory for orientation. We conducted two experiments: one with delay durations blocked, another with delay durations interleaved. As dependent variables, we examined four model-free metrics of dispersion as well as precision estimates in four simple models. We tested for effects of delay time using analyses of variance, linear regressions, and nested model comparisons. We found significant effects of set size and delay duration on both model-free and model-based measures of dispersion. However, the effect of delay duration was much weaker than that of set size, dependent on the analysis method, and apparent in only a minority of subjects. The highest forgetting slope found in either experiment at any set size was a modest 1.14°/s. As secondary results, we found a low rate of nontarget reports, and significant estimation biases towards oblique orientations (but no dependence of their magnitude on either set size or delay duration). Relative stability of working memory even at higher set sizes is consistent with earlier results for motion direction and spatial frequency. We compare with a recent study that performed a very similar experiment.

Analysis of Control-Oriented Wake Modeling Tools Using Lidar Field Results

DOE PAGES

Annoni, Jennifer; Fleming, Paul; Scholbrock, Andrew; ...

2018-02-08

Wind turbines in a wind farm operate individually to maximize their own performance regardless of the impact of aerodynamic interactions on neighboring turbines. Wind farm controls can be used to increase power production or reduce overall structural loads by properly coordinating turbines. One wind farm control strategy that is addressed in literature is known as wake steering, wherein upstream turbines operate in yaw misaligned conditions to redirect their wakes away from downstream turbines. The National Renewable Energy Laboratory (NREL) in Golden, CO conducted a demonstration of wake steering on a single utility-scale turbine. In this study, the turbine was operatedmore » at various yaw misalignment setpoints while a lidar mounted on the nacelle scanned five downstream distances. The lidar measurements were combined with turbine data, as well as measurements of the inflow made by a highly instrumented meteorological mast upstream. The full-scale measurements are used to validate controls-oriented tools, including wind turbine wake models, used for wind farm controls and optimization. This paper presents a quantitative comparison of the lidar data and controls-oriented wake models under different atmospheric conditions and turbine operation. The results show good agreement between the lidar data and the models under these different conditions.« less

Analysis of Control-Oriented Wake Modeling Tools Using Lidar Field Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Annoni, Jennifer; Fleming, Paul; Scholbrock, Andrew

Wind turbines in a wind farm operate individually to maximize their own performance regardless of the impact of aerodynamic interactions on neighboring turbines. Wind farm controls can be used to increase power production or reduce overall structural loads by properly coordinating turbines. One wind farm control strategy that is addressed in literature is known as wake steering, wherein upstream turbines operate in yaw misaligned conditions to redirect their wakes away from downstream turbines. The National Renewable Energy Laboratory (NREL) in Golden, CO conducted a demonstration of wake steering on a single utility-scale turbine. In this study, the turbine was operatedmore » at various yaw misalignment setpoints while a lidar mounted on the nacelle scanned five downstream distances. The lidar measurements were combined with turbine data, as well as measurements of the inflow made by a highly instrumented meteorological mast upstream. The full-scale measurements are used to validate controls-oriented tools, including wind turbine wake models, used for wind farm controls and optimization. This paper presents a quantitative comparison of the lidar data and controls-oriented wake models under different atmospheric conditions and turbine operation. The results show good agreement between the lidar data and the models under these different conditions.« less

Effects of thermo-mechanical behavior and hinge geometry on folding response of shape memory polymer sheets

NASA Astrophysics Data System (ADS)

Mailen, Russell W.; Dickey, Michael D.; Genzer, Jan; Zikry, Mohammed

2017-11-01

Shape memory polymer (SMP) sheets patterned with black ink hinges change shape in response to external stimuli, such as absorbed thermal energy from an infrared (IR) light. The geometry of these hinges, including size, orientation, and location, and the applied thermal loads significantly influence the final folded shape of the sheet, but these variables have not been fully investigated. We perform a systematic study on SMP sheets to fundamentally understand the effects of single and double hinge geometries, hinge orientation and spacing, initial temperature, heat flux intensity, and pattern width on the folding behavior. We have developed thermo-viscoelastic finite element models to characterize and quantify the stresses, strains, and temperatures as they relate to SMP shape changes. Our predictions indicate that hinge orientation can be used to reduce the total bending angle, which is the angle traversed by the folding face of the sheet. Two parallel hinges increase the total bending angle, and heat conduction between the hinges affects the transient folding response. IR intensity and initial temperatures can also influence the transient folding behavior. These results can provide guidelines to optimize the transient folding response and the three-dimensional folded structure obtained from self-folding polymer origami sheets that can be applied for myriad applications.

Developing collective customer knowledge and service climate: The interaction between service-oriented high-performance work systems and service leadership.

PubMed

Jiang, Kaifeng; Chuang, Chih-Hsun; Chiao, Yu-Ching

2015-07-01

This study theorized and examined the influence of the interaction between Service-Oriented high-performance work systems (HPWSs) and service leadership on collective customer knowledge and service climate. Using a sample of 569 employees and 142 managers in footwear retail stores, we found that Service-Oriented HPWSs and service leadership reduced the influences of one another on collective customer knowledge and service climate, such that the positive influence of service leadership on collective customer knowledge and service climate was stronger when Service-Oriented HPWSs were lower than when they were higher or the positive influence of Service-Oriented HPWSs on collective customer knowledge and service climate was stronger when service leadership was lower than when it was higher. We further proposed and found that collective customer knowledge and service climate were positively related to objective financial outcomes through service performance. Implications for the literature and managerial practices are discussed. (c) 2015 APA, all rights reserved).

Solar radiation and street temperature as function of street orientation. An analysis of the status quo and simulation of future scenarios towards sustainability in Bahrain

NASA Astrophysics Data System (ADS)

Silva, Joao Pinelo

2017-11-01

This paper discusses the contribution of street orientation towards the development of a comfortable microclimate for pedestrians in Bahrain. Increasing walkability is a global agenda to address issues such as a) transportation, b) energy consumption, c) health, and d) air pollution, all of which are topics of the sustainability agenda. Thermal comfort is one of the pre-requisites for walkability. In warm climates, this is a challenging goal. Street design is paramount for pedestrian comfort in warm climates. The roles of street orientation and aspect ratio are of particular importance as they determine the intake of solar radiation into the urban canyon. We investigate the state of affairs in Bahrain, by measuring the frequency with which the street orientations E-W, N-S, NE-SW, and NW-SE, currently occur. Research suggests that the street orientation E-W presents the lesser performance for mitigating the effects of heat gain. The ideal grid orientation would, therefore, be N-S, and NE-SW - NW-SE, avoiding street segments with E-W orientation. A countrywide analysis shows that E-W orientation accounts for the highest overall street length with 37%. The second most frequent orientation is N-S (29%), the best performer. NW-SE and NE-SW both have frequencies of only 17%. Preference for a street grid with N-S, NW-SE, and NE-SW orientation would improve the thermal performance of streets and provide a continuous network of a comfortable pedestrian environment. We simulate two future scenarios based on avoiding new E-W streets, or not. We measure their potential reduction in thermal gain and conclude that a simple policy could reduce solar exposition in 40%.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2014 Fourth Quarterly Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Mathur, Raj N.

2014-09-30

During the last quarter of FY 2014, the following technical progress has been made toward project milestones: 1) Autodesk, Inc. (Autodesk) has implemented a new fiber length distribution (FLD) model based on an unbreakable length assumption with Reduced Order Modeling (ROM) by the Proper Orthogonal Decomposition (POD) approach in the mid-plane, dual-domain and 3D solvers. 2) Autodesk improved the ASMI 3D solver for fiber orientation prediction using the anisotropic rotary diffusion (ARD) – reduced strain closure (RSC) model. 3) Autodesk received consultant services from Prof. C.L. Tucker at the University of Illinois on numerical simulation of fiber orientation and fibermore » length. 4) PlastiComp, Inc. (PlastiComp) suggested to Purdue University a procedure for fiber separation using an inert-gas atmosphere in the burn-off furnace. 5) Purdue University (Purdue) hosted a face-to-face project review meeting at Purdue University on August 6-7, 2014. 6) Purdue conducted fiber orientation measurements for 3 PlastiComp plaques: fast-fill 30wt% LCF/PP edged-gated, slow-fill 50wt% LCF/PP edge-gated, and slow-fill 50wt% LCF/PP center-gated plaques, and delivered the orientation data for these plaques at the selected locations (named A, B, and C) to PNNL. 7) PNNL conducted ASMI mid-plane analyses for the above PlastiComp plaques and compared the predicted fiber orientations with the measured data provided by Purdue at Locations A, B, and C on these plaques. 8) PNNL planned the project review meeting (August 6-7, 2014) with Purdue. 9) PNNL performed ASMI analyses for the Toyota complex parts with and without ribs, having different wall thicknesses, and using the PlastiComp 50wt% LCF/PP, 50wt% LCF/PA66, 30wt% LCF/PP, and 30wt% LCF/PA66 materials to provide guidance for tool design and modifications needed for molding these parts. 10) Magna Exteriors and Interiors Corp. (Magna) molded plaques from the 50% LCF/PP and 50% LCF/PA66 materials received from Plasticomp in order to extract machine purgings (purge materials) from Magna’s 200-Ton Injection Molding machine targeted to mold the complex part. 11) Toyota and Magna discussed with PNNL tool modification for molding the complex part.« less

Effect of gravity opientation on the thermal performance of Stirling-type pulse tube cryocoolers

NASA Technical Reports Server (NTRS)

Ronald, Ross G., Jr.; Johnson, D. L.

2003-01-01

This paper extends the investigation of angular orientation effects to the refrigeration performance of high frequency (-40 Hz) Stirling-type pulse tube cryocoolers typical of those used in long-life space applications. Strong orientation effects on the performance of such cryocoolers have recently been observed during system-level testing of both linear and U-tube type pulse tubes. To quantify the angular dependency effects, data have been gathered on both U-tube and linear type pulse tubes of two different manufacturers as a function of orientation angle, cold-tip temperature, and compressor stroke.

75 FR 30061 - Office of Community Oriented Policing Services; Agency Information Collection Activities...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... DEPARTMENT OF JUSTICE [OMB Number 1103-NEW] Office of Community Oriented Policing Services; Agency... until June 28, 2010. This process is conducted in accordance with 5 CFR 1320.10. If you have comments... Justice. [FR Doc. 2010-12939 Filed 5-27-10; 8:45 am] BILLING CODE 4410-AT-P ...

Anxiety and Depression in Breast Cancer Survivors of Different Sexual Orientations

ERIC Educational Resources Information Center

Boehmer, Ulrike; Glickman, Mark; Winter, Michael

2012-01-01

Objective: We conducted a study comparing anxiety and depression by sexual orientation in long-term breast cancer survivors, testing the hypothesis that sexual minority women (e.g., lesbian and bisexual women) have greater levels of anxiety and depression. Method: From a state cancer registry, we recruited 257 heterosexual and 69 sexual minority…

The Effectiveness of Instruction-Oriented Hypertext Systems Compared to Direct Instruction in E-Learning Environments

ERIC Educational Resources Information Center

Barhoumi, Chokri; Rossi, Pier Giuseppe

2013-01-01

The use of hypertext systems for learning and teaching complex and ill-structured domain of knowledge has been attracting attention in design of instruction. In this context, an experimental research has been conducted to explore the effectiveness of instructional design oriented hypertext systems. Cognitive flexibility hypertext theory is…

Effects of Instruction-Supported Learning with Worked Examples in Quantitative Method Training

ERIC Educational Resources Information Center

Wagner, Kai; Klein, Martin; Klopp, Eric; Puhl, Thomas; Stark, Robin

2013-01-01

An experimental field study at a German university was conducted in order to test the effectiveness of an integrated learning environment to improve the acquisition of knowledge about empirical research methods. The integrated learning environment was based on the combination of instruction-oriented and problem-oriented design principles and…

The Influence of Emotional Stimuli on Attention Orienting and Inhibitory Control in Pediatric Anxiety

ERIC Educational Resources Information Center

Mueller, Sven C.; Hardin, Michael G.; Mogg, Karin; Benson, Valerie; Bradley, Brendan P.; Reinholdt-Dunne, Marie Louise; Liversedge, Simon P.; Pine, Daniel S.; Ernst, Monique

2012-01-01

Background: Anxiety disorders are highly prevalent in children and adolescents, and are associated with aberrant emotion-related attention orienting and inhibitory control. While recent studies conducted with high-trait anxious adults have employed novel emotion-modified antisaccade tasks to examine the influence of emotional information on…

78 FR 17634 - Agenda and Notice of Public Meetings of the Colorado Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

... Civil Rights (Commission), and the Federal Advisory Committee Act (FACA), that an orientation meeting... Room, Denver, CO 80202. The meetings are to conduct an orientation and for project planning. Members of... Regional Office at 303-866-1040. Persons needing accessibility services should contact the Rocky Mountain...

Pathways to Conscience: Early Mother-Child Mutually Responsive Orientation and Children's Moral Emotion, Conduct, and Cognition

ERIC Educational Resources Information Center

Kochanska, Grazyna; Forman, David R.; Aksan, Nazan; Dunbar, Stephen B.

2005-01-01

Background: Associations between early mother-child mutually responsive orientation (MRO) and children's conscience have been previously established, but the mechanisms accounting for those links are not understood. We examined three such mediational mechanisms: (a) the child's enhanced enjoyment of interactions with the mother, (b) increased…

Susceptibility of low-chill blueberry cultivars to oriental fruit fly, mediterranean fruit fly, and melon fly (Diptera: Tephritidae)

USDA-ARS?s Scientific Manuscript database

Forced infestation studies were conducted to determine if fruits of southern highbush blueberries (Vaccinium corymbosum L. hybrids) are hosts for three invasive tephritid fruit flies. Fruits of 17 blueberry cultivars were exposed to gravid female flies of Bactrocera dorsalis (Hendel) (oriental frui...

Family Oriented Field Experience in Geography.

ERIC Educational Resources Information Center

Williams, Karen A.

A family-oriented geography field course about the southwestern United States was conducted in 1978 by a community college in Michigan (Delta College). Course activities took place in Colorado. The major purpose of the field experience was to offer learning experiences to family groups rather than to individual students. For purposes of the field…

Need for Orientation, Media Uses and Gratifications, and Media Effects.

ERIC Educational Resources Information Center

Weaver, David

In order to study the influence of need for orientation and media gratifications on media use and media effects in political communication, two previous surveys were studied to compare the causal modeling approach and the contingent conditions approach. In the first study, 339 personal interviews were conducted with registered voters during a…

"Research-Based" and "Profession-Oriented" as Prominent Knowledge Discourses in Curriculum Restructuring of Professional Programs

ERIC Educational Resources Information Center

Afdal, Hilde W.

2017-01-01

This article questions what kind of actors become involved and analyzes what forms of knowledge are activated, when discourses such as "research-based" and "profession-oriented" become basic preconditions in national curriculum change processes in Norway. A "mapping" is conducted, comprised of actors and ideas, played…

Fast Orientation of Video Images of Buildings Acquired from a UAV without Stabilization.

PubMed

Kedzierski, Michal; Delis, Paulina

2016-06-23

The aim of this research was to assess the possibility of conducting an absolute orientation procedure for video imagery, in which the external orientation for the first image was typical for aerial photogrammetry whereas the external orientation of the second was typical for terrestrial photogrammetry. Starting from the collinearity equations, assuming that the camera tilt angle is equal to 90°, a simplified mathematical model is proposed. The proposed method can be used to determine the X, Y, Z coordinates of points based on a set of collinearity equations of a pair of images. The use of simplified collinearity equations can considerably shorten the processing tine of image data from Unmanned Aerial Vehicles (UAVs), especially in low cost systems. The conducted experiments have shown that it is possible to carry out a complete photogrammetric project of an architectural structure using a camera tilted 85°-90° ( φ or ω) and simplified collinearity equations. It is also concluded that there is a correlation between the speed of the UAV and the discrepancy between the established and actual camera tilt angles.

Fast Orientation of Video Images of Buildings Acquired from a UAV without Stabilization

PubMed Central

Kedzierski, Michal; Delis, Paulina

2016-01-01

The aim of this research was to assess the possibility of conducting an absolute orientation procedure for video imagery, in which the external orientation for the first image was typical for aerial photogrammetry whereas the external orientation of the second was typical for terrestrial photogrammetry. Starting from the collinearity equations, assuming that the camera tilt angle is equal to 90°, a simplified mathematical model is proposed. The proposed method can be used to determine the X, Y, Z coordinates of points based on a set of collinearity equations of a pair of images. The use of simplified collinearity equations can considerably shorten the processing tine of image data from Unmanned Aerial Vehicles (UAVs), especially in low cost systems. The conducted experiments have shown that it is possible to carry out a complete photogrammetric project of an architectural structure using a camera tilted 85°–90° (φ or ω) and simplified collinearity equations. It is also concluded that there is a correlation between the speed of the UAV and the discrepancy between the established and actual camera tilt angles. PMID:27347954

Embodied memory allows accurate and stable perception of hidden objects despite orientation change.

PubMed

Pan, Jing Samantha; Bingham, Ned; Bingham, Geoffrey P

2017-07-01

Rotating a scene in a frontoparallel plane (rolling) yields a change in orientation of constituent images. When using only information provided by static images to perceive a scene after orientation change, identification performance typically decreases (Rock & Heimer, 1957). However, rolling generates optic flow information that relates the discrete, static images (before and after the change) and forms an embodied memory that aids recognition. The embodied memory hypothesis predicts that upon detecting a continuous spatial transformation of image structure, or in other words, seeing the continuous rolling process and objects undergoing rolling observers should accurately perceive objects during and after motion. Thus, in this case, orientation change should not affect performance. We tested this hypothesis in three experiments and found that (a) using combined optic flow and image structure, participants identified locations of previously perceived but currently occluded targets with great accuracy and stability (Experiment 1); (b) using combined optic flow and image structure information, participants identified hidden targets equally well with or without 30° orientation changes (Experiment 2); and (c) when the rolling was unseen, identification of hidden targets after orientation change became worse (Experiment 3). Furthermore, when rolling was unseen, although target identification was better when participants were told about the orientation change than when they were not told, performance was still worse than when there was no orientation change. Therefore, combined optic flow and image structure information, not mere knowledge about the rolling, enables accurate and stable perception despite orientation change. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Orientation of Zn3P2 films via phosphidation of Zn precursors

NASA Astrophysics Data System (ADS)

Katsube, Ryoji; Nose, Yoshitaro

2017-02-01

Orientation of solar absorber is an important factor to achieve high efficiency of thin film solar cells. In the case of Zn3P2 which is a promising absorber of low-cost and high-efficiency solar cells, (110)/(001) orientation was only reported in previous studies. We have successfully prepared (101)-oriented Zn3P2 films by phosphidation of (0001)-oriented Zn films at 350 °C. The phosphidation mechanism of Zn is discussed through STEM observations on the partially-reacted sample and the consideration of the relationship between the crystal structures of Zn and Zn3P2 . We revealed that (0001)-oriented Zn led to nucleation of (101)-oriented Zn3P2 due to the similarity in atomic arrangement between Zn and Zn3P2 . The electrical resistivity of the (101)-oriented Zn3P2 film was lower than those of (110)/(001)-oriented films, which is an advantage of the phosphidation technique to the growth processes in previous works. The results in this study demonstrated that well-conductive Zn3P2 films could be obtained by controlling orientations of crystal grains, and provide a guiding principle for microstructure control in absorber materials.

Work Engagement: Antecedents, the Mediating Role of Learning Goal Orientation and Job Performance

ERIC Educational Resources Information Center

Chughtai, Aamir Ali; Buckley, Finian

2011-01-01

Purpose: The present paper aims to explore the effects of state (trust in supervisor) and trait (trust propensity) trust on employees' work engagement. Furthermore, it seeks to investigate the mediating role of learning goal orientation in the relationship between work engagement and two forms of performance: in-role job performance and innovative…

Comparison study of thickness swell performance of commercial oriented strandboard flooring products

Treesearch

Hongmei Gu; Siqun Wang; Trairat Neimsuwan; Sunguo Wang

2005-01-01

The multiple layer structure of oriented strandboard (OSB) has a significant influence on its performance, including thickness swell (TS). TS is recognized as an important performance property for OSB products. Optimization of TS through layer property ma- nipulation to achieve the lowest total TS while maintaining acceptable mechanical properties is attainable if the...

Wavelet-based scalable L-infinity-oriented compression.

PubMed

Alecu, Alin; Munteanu, Adrian; Cornelis, Jan P H; Schelkens, Peter

2006-09-01

Among the different classes of coding techniques proposed in literature, predictive schemes have proven their outstanding performance in near-lossless compression. However, these schemes are incapable of providing embedded L(infinity)-oriented compression, or, at most, provide a very limited number of potential L(infinity) bit-stream truncation points. We propose a new multidimensional wavelet-based L(infinity)-constrained scalable coding framework that generates a fully embedded L(infinity)-oriented bit stream and that retains the coding performance and all the scalability options of state-of-the-art L2-oriented wavelet codecs. Moreover, our codec instantiation of the proposed framework clearly outperforms JPEG2000 in L(infinity) coding sense.

Study of the Integration of LIDAR and Photogrammetric Datasets by in Situ Camera Calibration and Integrated Sensor Orientation

NASA Astrophysics Data System (ADS)

Mitishita, E.; Costa, F.; Martins, M.

2017-05-01

Photogrammetric and Lidar datasets should be in the same mapping or geodetic frame to be used simultaneously in an engineering project. Nowadays direct sensor orientation is a common procedure used in simultaneous photogrammetric and Lidar surveys. Although the direct sensor orientation technologies provide a high degree of automation process due to the GNSS/INS technologies, the accuracies of the results obtained from the photogrammetric and Lidar surveys are dependent on the quality of a group of parameters that models accurately the user conditions of the system at the moment the job is performed. This paper shows the study that was performed to verify the importance of the in situ camera calibration and Integrated Sensor Orientation without control points to increase the accuracies of the photogrammetric and LIDAR datasets integration. The horizontal and vertical accuracies of photogrammetric and Lidar datasets integration by photogrammetric procedure improved significantly when the Integrated Sensor Orientation (ISO) approach was performed using Interior Orientation Parameter (IOP) values estimated from the in situ camera calibration. The horizontal and vertical accuracies, estimated by the Root Mean Square Error (RMSE) of the 3D discrepancies from the Lidar check points, increased around of 37% and 198% respectively.

A taxonomy of green supply chain management capability among electronics-related manufacturing firms in Taiwan.

PubMed

Shang, Kuo-Chung; Lu, Chin-Shan; Li, Shaorui

2010-05-01

This study investigated crucial green supply chain management (GSCM) capability dimensions and firm performance based on electronics-related manufacturing firms in Taiwan. On the basis of a factor analysis, six green supply chain management dimensions were identified: green manufacturing and packaging, environmental participation, green marketing, green suppliers, green stock, and green eco-design. According to their factor scores in the GSCM dimensions, a cluster analysis subsequently assigned responding firms into four groups, namely, the weak GSCM oriented group, the green marketing oriented group, the green supplier oriented group, and the green stock oriented group. Differences in firm performance and GSCM dimensions among groups were examined. Results indicated that the green marketing oriented group performed best. Based on the resource-based view (RBV), the capability of the green marketing oriented group was considered to be the deployment of a collection of resources that enables it to successfully compete against rivals. The importance of green marketing as a GSCM capability and strategic asset/critical resources for electronics-related manufacturing firms to obtain a competitive edge is therefore highlighted in this study. Copyright 2010 Elsevier Ltd. All rights reserved.

Vertical transport in isotype InAlN/GaN dipole induced diodes grown by molecular beam epitaxy

NASA Astrophysics Data System (ADS)

Fireman, M. N.; Li, Haoran; Keller, Stacia; Mishra, Umesh K.; Speck, James S.

2017-05-01

InAlN dipole diodes were developed and fabricated on both (0001) Ga-Face and (" separators="| 000 1 ¯) N-face oriented GaN on sapphire templates by molecular beam epitaxy. The orientation and direction of the InAlN polarization dipole are functions of the substrate orientation and composition, respectively. Special consideration was taken to minimize growth differences and impurity uptake during growth on these orientations of opposite polarity. Comparison of devices on similarly grown structures with In compositions in excess of 50% reveals that dipole diodes shows poorer forward bias performance and exhibited an increase in reverse bias leakage, regardless of orientation. Similarly, (0001) Ga-face oriented InAlN at a lowered 40% In composition had poor device characteristics, namely, the absence of expected exponential turn on in forward bias. By contrast, at In compositions close to 40%, (" separators="| 000 1 ¯) N-face oriented InAlN devices had excellent performance, with over five orders of magnitude of rectification and extracted barrier heights of 0.53- 0.62 eV; these values are in close agreement with simulation. Extracted ideality factors ranging from 1.08 to 1.38 on these devices are further evidence of their optimal performance. Further discussion focuses on the growth and orientation conditions that may lead to this discrepancy yet emphasizes that with proper design and growth strategy, the rectifying dipole diodes can be achieved with InAlN nitride dipole layers.

Influence of smectite suspension structure on sheet orientation in dry sediments: XRD and AFM applications.

PubMed

Zbik, Marek S; Frost, Ray L

2010-06-15

The structure-building phenomena within clay aggregates are governed by forces acting between clay particles. Measurements of such forces are important to understand in order to manipulate the aggregate structure for applications such as dewatering of mineral processing tailings. A parallel particle orientation is required when conducting XRD investigation on the oriented samples and conduct force measurements acting between basal planes of clay mineral platelets using atomic force microscopy (AFM). To investigate how smectite clay platelets were oriented on silicon wafer substrate when dried from suspension range of methods like SEM, XRD and AFM were employed. From these investigations, we conclude that high clay concentrations and larger particle diameters (up to 5 microm) in suspension result in random orientation of platelets in the substrate. The best possible laminar orientation in the clay dry film, represented in the XRD 001/020 intensity ratio of 47 was obtained by drying thin layers from 0.02 wt.% clay suspensions of the natural pH. Conducted AFM investigations show that smectite studied in water based electrolytes show very long-range repulsive forces lower in strength than electrostatic forces from double-layer repulsion. It was suggested that these forces may have structural nature. Smectite surface layers rehydrate in water environment forms surface gel with spongy and cellular texture which cushion approaching AFM probe. This structural effect can be measured in distances larger than 1000 nm from substrate surface and when probe penetrate this gel layer, structural linkages are forming between substrate and clay covered probe. These linkages prevent subsequently smooth detachments of AFM probe on way back when retrieval. This effect of tearing new formed structure apart involves larger adhesion-like forces measured in retrieval. It is also suggested that these effect may be enhanced by the nano-clay particles interaction. 2010 Elsevier Inc. All rights reserved.

Photovoltaic performance of block copolymer devices is independent of the crystalline texture in the active layer

DOE PAGES

Guo, Changhe; Lee, Youngmin; Lin, Yen -Hao; ...

2016-06-15

The electronic properties of organic semiconductors are strongly influenced by intermolecular packing. When cast as thin films, crystalline π-conjugated molecules are strongly textured, potentially leading to anisotropic charge transport. Consequently, it is hypothesized that the orientation of crystallites in the active layer plays an important role in charge extraction and organic photovoltaic device performance. Here we demonstrate orientation control of molecular packing from mostly face-on to edge-on configurations in the active layer of P3HT- b-PFTBT block copolymer photovoltaics using 1-chloronaphthalene as a solvent additive. The effect of molecular orientations in P3HT crystals on charge transport and solar cell performance ismore » examined. We find that optimized photovoltaic device performance is independent of the crystalline texture of P3HT. Our observations provide further insights into the molecular organization required for efficient charge transport and overall device efficiencies. That is, the dominant crystal orientation, whether face-on or edge-on, is not critical to organic solar cells. Furthermore, a broad distribution of crystallite orientations ensures pathways for charge transport in any direction and enables efficient charge extraction in photovoltaic devices.« less

Prospects of low-dimensional and nanostructured silicon-based thermoelectric materials: findings from theory and simulation

NASA Astrophysics Data System (ADS)

Neophytou, Neophytos

2015-04-01

Silicon based low-dimensional materials receive significant attention as new generation thermoelectric materials after they have demonstrated record low thermal conductivities. Very few works to-date, however, report significant advances with regards to the power factor. In this review we examine possibilities of power factor enhancement in: (i) low-dimensional Si channels and (ii) nanocrystalline Si materials. For low-dimensional channels we use atomistic simulations and consider ultra-narrow Si nanowires and ultra-thin Si layers of feature sizes below 15 nm. Room temperature is exclusively considered. We show that, in general, low-dimensionality does not offer possibilities for power factor improvement, because although the Seebeck coefficient could slightly increase, the conductivity inevitably degrades at a much larger extend. The power factor in these channels, however, can be optimized by proper choice of geometrical parameters such as the transport orientation, confinement orientation, and confinement length scale. Our simulations show that in the case where room temperature thermal conductivities as low as κ l = 2 W/mK are achieved, the ZT figure of merit of an optimized Si low-dimensional channel could reach values around unity. For the second case of materials, we show that by making effective use of energy filtering, and taking advantage of the inhomogeneity within the nanocrystalline geometry, the underlying potential profile and dopant distribution large improvements in the thermoelectric power factor can be achieved. The paper is intended to be a review of the main findings with regards to the thermoelectric performance of nanoscale Si through our simulation work as well as through recent experimental observations.

Water-resources investigations of the U.S. Geological Survey in Montana, October 1983 through September 1984

USGS Publications Warehouse

Roberts, R.S.

1984-01-01

U.S. Geological Survey investigations of the water resources of Montana are described. Hydrologic information and knowledge of the water resources are gained and disseminated principally by programs of (1) collecting hydrologic data on a continuing basis , (2) conducting water-resources appraisals of surface and ground water, (3) conducting supportive research in hydrology and related fields, (4) disseminating water data and results of investigations to the public, (5) coordinating acquisition of water data by Federal agencies, and (6) providing technical assistance in hydrologic fields to other government agencies. The Montana district of the U.S. Geological Survey conducts its hydrologic work through a headquarters office in Helena, a subdistrict office in Billings, and field offices in Helena, Fort Peck, and Kalispell. The district employs 67 people to work on 25 funded projects that are organized under the general categories of data-collection programs, problem-oriented studies , a real appraisals, coal-related studies, research projects, and hydrologic studies and research performed under contracts to research organizations. (USGS)

Do Superior or Inferior Interlaminar Approach or Bevel Orientation Predispose to Nonepidural Needle Penetration?

PubMed

Koontz, Nicholas A; Wiggins, Richard H; Stoddard, Gregory J; Shah, Lubdha M

2017-10-01

There is a paucity of evidence-based literature regarding the advantages and disadvantages of the interlaminar approach and needle bevel orientation for performing a lumbar interlaminar epidural steroid injection (ESI). The purpose of this study was to determine if superior versus inferior lamina approach, needle bevel tip orientation, or both may predispose to inadvertent nonepidural penetration during lumbar interlaminar ESI. A prospective study was performed of patients with low back pain with or without radicular pain or neurogenic claudication referred for lumbar interlaminar ESI. Two hundred eleven patients were randomized by interlaminar approach (superior vs inferior) and bevel tip orientation (cranial vs caudal). Lumbar interlaminar ESI was performed by six interventionalists of varying levels of experience using fluoroscopic guidance with curved tip epidural needles, using loss-of-resistance technique and confirmation with contrast opacification. Exact Poisson regression was used to model the study outcome. Two hundred twenty-one lumbar interlaminar ESIs were performed on 211 patients, randomized to a superior (n = 121) or inferior lamina approach (n = 100) and to a cranial (n = 103) or caudal (n = 118) orientation of the bevel tip. Epidural needle placement was confirmed in 96.4% (n = 213) of cases. Nonepidural needle placement was most commonly associated with superior lamina approach and caudal bevel tip orientation, which was marginally significant (adjusted risk ratio, 6.88; 95% CI, 0.93-∞; p = 0.059). Inadvertent nonepidural needle penetration during fluoroscopically guided lumbar interlaminar ESI appears to be affected by approach, with superior lamina approach and caudal bevel tip orientation being the least favorable technique.

Think manager--think male in adolescents and its relation to sexism and emotions in leadership.

PubMed

García-Ael, Cristina; Cuadrado, Isabel; Molero, Fernando

2013-01-01

From the perspective of the Think manager--think male, this study was conducted to examine the type of leadership role depending on gender in a sample of 158 Spanish adolescents -according to three types of leaders: "male middle leader", "female middle leader" and "middle leader in general". The kind of emotional expression (positive and negative) evoked by their leadership behaviors (task- and relationship- oriented) was also analyzed. Lastly, whether adolescents' sexist beliefs affected the attribution of traits and the emotional expression towards these leaders was examined. Results showed that task-oriented traits were more characteristic of the leadership role than relationship-oriented traits. Adolescents expressed more positive emotions towards a task-oriented leader and towards a leader behaving in ways associated with both task- and relationship- oriented styles, but only for men. Finally, hostile sexism predicted fewer task-oriented traits to female leaders, more negative affect towards task-oriented male leaders and towards counter-stereotypic leaders. These results were moderated by the sex of adolescents.

High microwave attenuation performance of planar carbonyl iron particles with orientation of shape anisotropy field

NASA Astrophysics Data System (ADS)

Guo, Cheng; Yang, Zhihong; Shen, Shile; Liang, Juan; Xu, Guoyue

2018-05-01

Planar anisotropy carbonyl iron (PACI) particles were prepared from commercial spherical carbonyl iron particles through a high performance ball-milling technique. The paraffin composites with orientation of shape anisotropy field for these PACI particles were obtained by applying an external magnetic field during the fabrication process. The frequency-dependent complex permeability values of these prepared paraffin composites have been investigated in the frequency range of 1-18 GHz. The results demonstrate that the orientation of shape anisotropy field for these PACI particles can effectively increase the complex permeability and decrease the complex permittivity values. Benefit from the enhancement in the complex permeability and reduction in the complex permittivity, the better impedance matching condition can be obtained and thus the good microwave absorption performance can be achieved for the samples with enough magnetic field orientation time.

LOFT Debriefings: An Analysis of Instructor Techniques and Crew Participation

NASA Technical Reports Server (NTRS)

Dismukes, R. Key; Jobe, Kimberly K.; McDonnell, Lori K.

1997-01-01

This study analyzes techniques instructors use to facilitate crew analysis and evaluation of their Line-Oriented Flight Training (LOFT) performance. A rating instrument called the Debriefing Assessment Battery (DAB) was developed which enables raters to reliably assess instructor facilitation techniques and characterize crew participation. Thirty-six debriefing sessions conducted at five U.S. airlines were analyzed to determine the nature of instructor facilitation and crew participation. Ratings obtained using the DAB corresponded closely with descriptive measures of instructor and crew performance. The data provide empirical evidence that facilitation can be an effective tool for increasing the depth of crew participation and self-analysis of CRM performance. Instructor facilitation skill varied dramatically, suggesting a need for more concrete hands-on training in facilitation techniques. Crews were responsive but fell short of actively leading their own debriefings. Ways to improve debriefing effectiveness are suggested.

Crew performance and communication: Performing a terrain navigation task

NASA Technical Reports Server (NTRS)

Battiste, Vernol; Delzell, Susanne

1993-01-01

A study was conducted to examine the map and route cues pilots use while navigating under controlled, but realistic, nap-of-the-earth (NOE) flight conditions. US Army helicopter flight crews were presented a map and route overlay and asked to perform normal mission planning. They then viewed a video-recording of the out-the-window scene during low-level flights, without the route overlay, and were asked periodically to locate their current position on the map. The pilots and navigators were asked to communicate normally during the planning and flight phases. During each flight the navigator's response time, accuracy, and subjective workload were assessed. Post-flight NASA-TLX workload ratings were collected. No main effect of map orientation (north-up vs. track-up) was found for errors or response times on any of the tasks evaluated. Navigators in the north-up group rated their workload lower than those in the track-up group.

Evaluating the interior thermal performance of mosques in the tropical environment

NASA Astrophysics Data System (ADS)

Nordin, N. I.; Misni, A.

2018-02-01

This study introduces the methodology applied in conducting data collection and data analysis. Data collection is the process of gathering and measuring information on targeted variables in an established systematic method. Qualitative and quantitative methods are combined in collecting data from government departments, site experiments and observation. Furthermore, analysing the indoor thermal performance data in the heritage and new mosques were used thermal monitoring tests, while validation will be made by meteorology data. Origin 8 version of the software is used to analyse all the data. Comparison techniques were applied to analyse several factors that influence the indoor thermal performance of mosques, namely building envelope include floor area, opening, and material used. Building orientation, location, surrounding vegetation and water elements are also recorded as supported building primary data. The comparison of primary data using these variables for four mosques include heritage and new buildings were revealed.

Determinants of Benin elementary school science teachers' orientation toward inquiry-based instructional practices

NASA Astrophysics Data System (ADS)

Gado, Issaou

The Republic of Benin (West Africa) undertook a nationwide curriculum reform that put an emphasis on inquiry-based instructional practices. Little, if any, research has been conducted to explore factors that could be related to teachers' orientation toward inquiry instructional practices. The purpose of this research study was to investigate factors and concerns that determine Benin elementary school teachers' orientation toward the use of inquiry-based instruction in the teaching of science. The study followed a naturalistic inquiry methodology combining a correlational ex post facto design and an observational case-study design. The theory of Planned Behavior was the conceptual framework used to design the study. Two hundred (N = 200) elementary school teachers and three (n = 3) case study participants were purposively selected. Data was gathered via the Revised Science Attitude Scale (Thompson & Shrigley, 1986), the Science Teachers' Ideological Preference Scale (Jones & Harty, 1978), open-ended questions, interviews, and classroom observations using audiorecorders, videorecorders, and the researcher-contextualized version of the Observational System for the Analysis of Classroom Instruction (Hough, 1966). Qualitative and quantitative data provided a deeper understanding of participants' responses. Quantitative measures indicated that Benin elementary school teachers have positive attitudes toward school science, significant positive orientation toward both inquiry-based instruction and traditional non inquiry-based instruction, and higher orientation toward inquiry-based instruction than traditional non inquiry-based instruction. Attitude toward handling materials for investigations was found to significantly contribute to the prediction of participants' inquiry orientation. Qualitative analyses of participants' responses indicated that the expectations of educational leaders, individual motivation to comply with the program, a perceived control of the performance of inquiry-based activities, students' inquiry outcome expectancy or likelihood of occurrence in the classroom, the pedagogical structure of the program, and the student-centeredness of the program were potential motivational factors that could explain participants' orientation toward inquiry-based instruction. Four major concerns---lack of materials for teaching, lack of training in the process and strategy of inquiry, overloaded curriculum content, students' linguistic difficulties---were perceived obstacles in implementing inquiry-based instruction. Implications for transformative curriculum practices are discussed.

National water-information clearinghouse activities; ground-water perspective

USGS Publications Warehouse

Haupt, C.A.; Jensen, R.A.

1988-01-01

The US Geological Survey (USGS) has functioned for many years as an informal clearinghouse for water resources information, enabling users to access groundwater information effectively. Water resources clearinghouse activities of the USGS are conducted through several separate computerized water information programs that are involved in the collection, storage, retrieval, and distribution of different types of water information. The following USGS programs perform water information clearinghouse functions and provide the framework for a formalized National Water-Information Clearinghouse: (1) The National Water Data Exchange--a nationwide confederation of more than 300 Federal, State, local, government, academic, and private water-oriented organizations that work together to improve access to water data; (2) the Water Resources Scientific Information Center--acquires, abstracts, and indexes the major water-resources-related literature of the world, and provides this information to the water resources community; (3) the Information Transfer Program--develops innovative approaches to transfer information and technology developed within the USGS to audiences in the public and private sectors; (4) the Hydrologic Information Unit--provides responses to a variety of requests, both technical and lay-oriented, for water resources information , and helps efforts to conduct water resources research; (5) the Water Data Storage and Retrieval System--maintains accessible computerized files of hydrologic data collected nationwide, by the USGS and other governmental agencies, from stream gaging stations, groundwater observation wells, and surface- and groundwater quality sampling sites; (6) the Office of Water Data Coordination--coordinate the water data acquisition activities of all agencies of the Federal Government, and is responsible for the planning, design, and inter-agency coordination of a national water data and information network; and (7) the Water Resources Research Institute Program--coordinates and evaluates activities performed by a variety of groundwater contamination studies ranging from field investigations to analysis of socioeconomic issues. (Lantz-PTT)

Evaluation of SPLAT with spinosad and methyl eugenol or cue-lure for "attract-and-kill" of oriental and melon fruit flies (Diptera: Tephritidae) in Hawaii.

PubMed

Vargas, Roger I; Stark, John D; Hertlein, Mark; Neto, Agenor Mafra; Coler, Reginald; Piñero, Jaime C

2008-06-01

Specialized Pheromone and Lure Application Technology (SPLAT) methyl eugenol (ME) and cue-lure (C-L) "attract-and-kill" sprayable formulations containing spinosad were compared with other formulations under Hawaiian weather conditions against oriental fruit fly, Bactrocera dorsalis (Hendel), and melon fly, Bactrocera cucurbitae (Coquillett) (Diptera: Tephritidae), respectively. Field tests were conducted with three different dispensers (Min-U-Gel, Acti-Gel, and SPLAT) and two different insecticides (naled and spinosad). SPLAT ME with spinosad was equal in performance to the standard Min-U-Gel ME with naled formulation up to 12 wk. SPLAT C-L with spinosad was equal in performance to the standard Min-U-Gel C-L with naled formulation during weeks 7 to12, but not during weeks 1-6. In subsequent comparative trials, SPLAT ME + spinosad compared favorably with the current standard of Min-U-Gel ME + naled for up to 6 wk, and it was superior from weeks 7 to 12 in two separate tests conducted in a papaya (Carica papaya L.) orchard and a guava (Psidium guajava L.) orchard, respectively. In outdoor paired weathering tests (fresh versus weathered), C-L dispensers (SPLAT + spinosad, SPLAT + naled, and Min-U-Gel + naled) were effective up to 70 d. Weathered ME dispensers with SPLAT + spinosad compared favorably with SPLAT + naled and Min-U-Gel + naled, and they were equal to fresh dispensers for 21-28 d, depending on location. Our current studies indicate that SPLAT ME and SPLAT C-L sprayable attract-and-kill dispensers containing spinosad are a promising substitute for current liquid organophosphate insecticide formulations used for areawide suppression of B. dorsalis and B. cucurbitae in Hawaii.

Effect of nozzle and vertical-tail variables on the performance of a 3-surface F-15 model at transonic Mach numbers. [Langley 16 foot transonic tunnel

NASA Technical Reports Server (NTRS)

Pendergraft, O. C., Jr.; Bare, E. A.

1982-01-01

An investigation was conducted in the Langley 16 foot transonic tunnel to determine the longitudinal aerodynamic characteristics of twin two dimensional nozzles and twin baseline axisymmetric nozzles installed on a fully metric 0.047 scale model of the F-15 three surface configuration (canards, wing, horizontal tails). The effects on performance of two dimensional nozzle in flight thrust reversing, locations and orientation of the vertical tails, and deflections of the horizontal tails were also determined. Test data were obtained at static conditions and at Mach numbers from 0.60 to 1.20 over an angle of attack range from -2 deg to 15 deg. Nozzle pressure ratio was varied from jet off to about 6.5.

Hall thruster with grooved walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li Hong; Ning Zhongxi; Yu Daren

2013-02-28

Axial-oriented and azimuthal-distributed grooves are formed on channel walls of a Hall thruster after the engine undergoes a long-term operation. Existing studies have demonstrated the relation between the grooves and the near-wall physics, such as sheath and electron near-wall transport. The idea to optimize the thruster performance with such grooves was also proposed. Therefore, this paper is devoted to explore the effects of wall grooves on the discharge characteristics of a Hall thruster. With experimental measurements, the variations on electron conductivity, ionization distribution, and integrated performance are obtained. The involved physical mechanisms are then analyzed and discussed. The findings helpmore » to not only better understand the working principle of Hall thruster discharge but also establish a physical fundamental for the subsequent optimization with artificial grooves.« less

Isolated and coupled superquadric loop antennas for mobile communications applications

NASA Technical Reports Server (NTRS)

Jensen, Michael A.; Rahmat-Samii, Yahya

1993-01-01

This work provides an investigation of the performance of loop antennas for use in mobile communications applications. The analysis tools developed allow for high flexibility by representing the loop antenna as a superquadric curve, which includes the case of circular, elliptical, and rectangular loops. The antenna may be in an isolated environment, located above an infinite ground plane, or placed near a finite conducting plate or box. In cases where coupled loops are used, the two loops may have arbitrary relative positions and orientations. Several design examples are included to illustrate the versatility of the analysis capabilities. The performance of coupled loops arranged in a diversity scheme is also evaluated, and it is found that high diversity gain can be achieved even when the antennas are closely spaced.

Helicity, membrane incorporation, orientation and thermal stability of the large conductance mechanosensitive ion channel from E. coli

NASA Technical Reports Server (NTRS)

Arkin, I. T.; Sukharev, S. I.; Blount, P.; Kung, C.; Brunger, A. T.

1998-01-01

In this report, we present structural studies on the large conductance mechanosensitive ion channel (MscL) from E. coli in detergent micelles and lipid vesicles. Both transmission Fourier transform infrared spectroscopy and circular dichroism (CD) spectra indicate that the protein is highly helical in detergents as well as liposomes. The secondary structure of the proteins was shown to be highly resistant towards denaturation (25-95 degrees C) based on an ellipticity thermal profile. Amide H+/D+ exchange was shown to be extensive (ca. 66%), implying that two thirds of the protein are water accessible. MscL, reconstituted in oriented lipid bilayers, was shown to possess a net bilayer orientation using dichroic ratios measured by attenuated total-reflection Fourier transform infrared spectroscopy. Here, we present and discuss this initial set of structural data on this new family of ion-channel proteins.